3885 files changed, 289766 insertions, 73738 deletions

diff --git a/.gitignore b/.gitignore
index 51bd99d6a26..caa8395f635 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,7 +3,7 @@
 # subdirectories here. Add them in the ".gitignore" file
 # in that subdirectory instead.
 #
-# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# NOTE! Please use 'git ls-files -i --exclude-standard'
 # command after changing this file, to see if there are
 # any tracked files which get ignored after the change.
 #
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 44f52a4f590..cbbd3e06994 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -60,3 +60,62 @@ Description:
 		Indicates whether the block layer should automatically
 		generate checksums for write requests bound for
 		devices that support receiving integrity metadata.
+
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can
+		address.  It is typically 512 bytes.
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can write
+		without resorting to read-modify-write operation.  It is
+		usually the same as the logical block size but may be
+		bigger.  One example is SATA drives with 4KB sectors
+		that expose a 512-byte logical block size to the
+		operating system.
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a preferred minimum I/O size,
+		which is the smallest request the device can perform
+		without incurring a read-modify-write penalty.  For disk
+		drives this is often the physical block size.  For RAID
+		arrays it is often the stripe chunk size.
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report an optimal I/O size, which is
+		the device's preferred unit of receiving I/O.  This is
+		rarely reported for disk drives.  For RAID devices it is
+		usually the stripe width or the internal block size.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
new file mode 100644
index 00000000000..0a92a7c93a6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -0,0 +1,33 @@
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/model
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 model for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 revision for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 83 serial number for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 vendor for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	A symbolic link to /sys/block/cciss!cXdY
diff --git a/Documentation/ABI/testing/sysfs-devices-cache_disable b/Documentation/ABI/testing/sysfs-devices-cache_disable
new file mode 100644
index 00000000000..175bb4f7051
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-cache_disable
@@ -0,0 +1,18 @@
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
new file mode 100644
index 00000000000..6dcf75e594f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -0,0 +1,479 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file is read-only and specifies how many
+		objects have been allocated using the fast path.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file is read-only and specifies how
+		many times a cpu slab has been full and it has been refilled
+		by using a slab from the list of partially used slabs.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file is read-only and specifies how many
+		times the per-cpu freelist was empty but there were objects
+		available as the result of remote cpu frees.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is read-only and specifies how many times
+		a new slab had to be allocated from the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file is read-only and specifies how many
+		objects have been allocated using the slow path because of a
+		refill or allocation from a partial or new slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush is read-only and specifies how many
+		times a cache's cpu slabs have been flushed as the result of
+		destroying or shrinking a cache, a cpu going offline, or as
+		the result of forcing an allocation from a certain node.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_empty is read-only and specifies how many
+		times an empty cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_full is read-only and specifies how many
+		times a full cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_remote_frees is read-only and specifies how
+		many times a cpu slab has been deactivated and contained free
+		objects that were freed remotely.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_head is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		head of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_tail is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		tail of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_add_partial is read-only and specifies how many
+		times an object has been freed in a full slab so that it had to
+		added to its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file is read-only and specifies how many
+		objects have been freed using the fast path because it was an
+		object from the cpu slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file is read-only and specifies how many
+		objects have been freed to a frozen slab (i.e. a remote cpu
+		slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_remove_partial is read-only and specifies how
+		many times an object has been freed to a now-empty slab so
+		that it had to be removed from its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file is read-only and specifies how many times an
+		empty slab has been freed back to the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file is read-only and specifies how many
+		objects have been freed using the slow path (i.e. to a full or
+		partial slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file order_fallback is read-only and specifies how many
+		times an allocation of a new slab has not been possible at the
+		cache's order and instead fallen back to its minimum possible
+		order.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.
diff --git a/Documentation/Changes b/Documentation/Changes
index b95082be4d5..d21b3b5aa54 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -48,6 +48,7 @@ o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
 o  udev                   081                     # udevinfo -V
 o  grub                   0.93                    # grub --version
+o  mcelog		  0.6
 
 Kernel compilation
 ==================
@@ -276,6 +277,16 @@ before running exportfs or mountd.  It is recommended that all NFS
 services be protected from the internet-at-large by a firewall where
 that is possible.
 
+mcelog
+------
+
+In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
+as a regular cronjob similar to the x86-64 kernel to process and log
+machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
+events are errors reported by the CPU. Processing them is strongly encouraged.
+All x86-64 kernels since 2.6.4 require the mcelog utility to
+process machine checks.
+
 Getting updated software
 ========================
 
@@ -365,6 +376,10 @@ FUSE
 ----
 o <http://sourceforge.net/projects/fuse>
 
+mcelog
+------
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+
 Networking
 **********
 
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 72968cd5eaf..8bb37237ebd 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
 icache footprint for the CPU and simply because there is less memory
 available for the pagecache. Just think about it; a pagecache miss causes a
-disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles
-that can go into these 5 miliseconds.
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
 
 A reasonable rule of thumb is to not put inline at functions that have more
 than 3 lines of code in them. An exception to this rule are the cases where
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index d9aa43d78bc..5aceb88b3f8 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -676,8 +676,8 @@ this directory the following files can currently be found:
 	dma-api/all_errors	This file contains a numeric value. If this
 				value is not equal to zero the debugging code
 				will print a warning for every error it finds
-				into the kernel log. Be carefull with this
-				option. It can easily flood your logs.
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
 
 	dma-api/disabled	This read-only file contains the character 'Y'
 				if the debugging code is disabled. This can
@@ -704,12 +704,24 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index b1eb661e630..9632444f6c6 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml
+	    alsa-driver-api.xml writing-an-alsa-driver.xml \
+	    tracepoint.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 372dec20c8d..5cff41a5fa7 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
new file mode 100644
index 00000000000..b0756d0fd57
--- /dev/null
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Tracepoints">
+ <bookinfo>
+  <title>The Linux Kernel Tracepoint API</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Jason</firstname>
+    <surname>Baron</surname>
+    <affiliation>
+     <address>
+      <email>jbaron@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+  <chapter id="intro">
+   <title>Introduction</title>
+   <para>
+     Tracepoints are static probe points that are located in strategic points
+     throughout the kernel. 'Probes' register/unregister with tracepoints
+     via a callback mechanism. The 'probes' are strictly typed functions that
+     are passed a unique set of parameters defined by each tracepoint.
+   </para>
+
+   <para>
+     From this simple callback mechanism, 'probes' can be used to profile, debug,
+     and understand kernel behavior. There are a number of tools that provide a
+     framework for using 'probes'. These tools include Systemtap, ftrace, and
+     LTTng.
+   </para>
+
+   <para>
+     Tracepoints are defined in a number of header files via various macros. Thus,
+     the purpose of this document is to provide a clear accounting of the available
+     tracepoints. The intention is to understand not only what tracepoints are
+     available but also to understand where future tracepoints might be added.
+   </para>
+
+   <para>
+     The API presented has functions of the form:
+     <function>trace_tracepointname(function parameters)</function>. These are the
+     tracepoints callbacks that are found throughout the code. Registering and
+     unregistering probes with these callback sites is covered in the
+     <filename>Documentation/trace/*</filename> directory.
+   </para>
+  </chapter>
+
+  <chapter id="irq">
+   <title>IRQ</title>
+!Iinclude/trace/events/irq.h
+  </chapter>
+
+</book>
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 6389dec3345..93cb28d05dc 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -118,7 +118,7 @@ to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
 the beginning. If the object was moved to the same chain,
-then the reader doesnt care : It might eventually
+then the reader doesn't care : It might eventually
 scan the list again without harm.
 
 
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 068848240a8..02cced183b2 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu:
-  0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
-  1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
-  2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
-  3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
-  4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
-  5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
-  6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
-  7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
+rcu:
+  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
+  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
+  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
+  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
+  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
+  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
+  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
+  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
 rcu_bh:
-  0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
-  2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
-  3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
-  4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
-  6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
+  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
+  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
+  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
+  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
 The first section lists the rcu_data structures for rcu, the second for
 rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
@@ -253,12 +254,6 @@ o	"pqc" indicates which grace period the last-observed quiescent
 o	"qp" indicates that RCU still expects a quiescent state from
 	this CPU.
 
-o	"rpfq" is the number of rcu_pending() calls on this CPU required
-	to induce this CPU to invoke force_quiescent_state().
-
-o	"rp" is low-order four hex digits of the count of how many times
-	rcu_pending() has been invoked on this CPU.
-
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
 	scheduler or by irq.  The number after the "/" is the interrupt
@@ -305,6 +300,9 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
+There is also an rcu/rcudata.csv file with the same information in
+comma-separated-variable spreadsheet format.
+
 
 The output of "cat rcu/rcugp" looks as follows:
 
@@ -411,3 +409,63 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		For example, the first entry at the lowest level shows
 		"^0", indicating that it corresponds to bit zero in
 		the first entry at the middle level.
+
+
+The output of "cat rcu/rcu_pending" looks as follows:
+
+rcu:
+  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+rcu_bh:
+  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+
+As always, this is once again split into "rcu" and "rcu_bh" portions.
+The fields are as follows:
+
+o	"np" is the number of times that __rcu_pending() has been invoked
+	for the corresponding flavor of RCU.
+
+o	"qsp" is the number of times that the RCU was waiting for a
+	quiescent state from this CPU.
+
+o	"cbr" is the number of times that this CPU had RCU callbacks
+	that had passed through a grace period, and were thus ready
+	to be invoked.
+
+o	"cng" is the number of times that this CPU needed another
+	grace period while RCU was idle.
+
+o	"gpc" is the number of times that an old grace period had
+	completed, but this CPU was not yet aware of it.
+
+o	"gps" is the number of times that a new grace period had started,
+	but this CPU was not yet aware of it.
+
+o	"nf" is the number of times that this CPU suspected that the
+	current grace period had run for too long, and thus needed to
+	be forced.
+
+	Please note that "forcing" consists of sending resched IPIs
+	to holdout CPUs.  If that CPU really still is in an old RCU
+	read-side critical section, then we really do have to wait for it.
+	The assumption behing "forcing" is that the CPU is not still in
+	an old RCU read-side critical section, but has not yet responded
+	for some other reason.
+
+o	"nn" is the number of times that this CPU needed nothing.  Alert
+	readers will note that the rcu "nn" number for a given CPU very
+	closely matches the rcu_bh "np" number for that same CPU.  This
+	is due to short-circuit evaluation in rcu_pending().
diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt
index 6fc65603592..561826f8209 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/SM501.txt
@@ -5,7 +5,7 @@ Copyright 2006, 2007 Simtec Electronics
 
 The Silicon Motion SM501 multimedia companion chip is a multifunction device
 which may provide numerous interfaces including USB host controller USB gadget,
-Asyncronous Serial ports, Audio functions and a dual display video interface.
+asynchronous serial ports, audio functions, and a dual display video interface.
 The device may be connected by PCI or local bus with varying functions enabled.
 
 Core
diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt
index 629c92e9978..34614b4c708 100644
--- a/Documentation/Smack.txt
+++ b/Documentation/Smack.txt
@@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything
 other than a letter or digit, are reserved for use by the Smack development
 team. Smack labels are unstructured, case sensitive, and the only operation
 ever performed on them is comparison for equality. Smack labels cannot
-contain unprintable characters or the "/" (slash) character. Smack labels
-cannot begin with a '-', which is reserved for special options.
+contain unprintable characters, the "/" (slash), the "\" (backslash), the "'"
+(quote) and '"' (double-quote) characters.
+Smack labels cannot begin with a '-', which is reserved for special options.
 
 There are some predefined labels:
 
@@ -523,3 +524,18 @@ Smack supports some mount options:
 
 These mount options apply to all file system types.
 
+Smack auditing
+
+If you want Smack auditing of security events, you need to set CONFIG_AUDIT
+in your kernel configuration.
+By default, all denied events will be audited. You can change this behavior by
+writing a single character to the /smack/logging file :
+0 : no logging
+1 : log denied (default)
+2 : log accepted
+3 : log denied & accepted
+
+Events are logged as 'key=value' pairs, for each event you at least will get
+the subjet, the object, the rights requested, the action, the kernel function
+that triggered the event, plus other pairs depending on the type of event
+audited.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index f309d3c6221..5c555a8b39e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -91,6 +91,10 @@ Be as specific as possible.  The WORST descriptions possible include
 things like "update driver X", "bug fix for driver X", or "this patch
 includes updates for subsystem X.  Please apply."
 
+The maintainer will thank you if you write your patch description in a
+form which can be easily pulled into Linux's source code management
+system, git, as a "commit log".  See #15, below.
+
 If your description starts to get long, that's a sign that you probably
 need to split up your patch.  See #3, next.
 
@@ -183,8 +187,9 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@kernel.org managed by Jesper Juhl; which collects "trivial"
-patches. Trivial patches must qualify for one of the following rules:
+trivial@kernel.org which collects "trivial" patches. Have a look
+into the MAINTAINERS file for its current manager.
+Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1)
  Warning fixes (cluttering with useless warnings is bad)
@@ -196,7 +201,6 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/juhl/trivial/>
 
 
 
@@ -405,7 +409,14 @@ person it names.  This tag documents that potentially interested parties
 have been included in the discussion
 
 
-14) Using Tested-by: and Reviewed-by:
+14) Using Reported-by:, Tested-by: and Reviewed-by:
+
+If this patch fixes a problem reported by somebody else, consider adding a
+Reported-by: tag to credit the reporter for their contribution.  Please
+note that this tag should not be added without the reporter's permission,
+especially if the problem was not reported in a public forum.  That said,
+if we diligently credit our bug reporters, they will, hopefully, be
+inspired to help us again in the future.
 
 A Tested-by: tag indicates that the patch has been successfully tested (in
 some environment) by the person named.  This tag informs maintainers that
@@ -444,7 +455,7 @@ offer a Reviewed-by tag for a patch.  This tag serves to give credit to
 reviewers and to inform maintainers of the degree of review which has been
 done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
 understand the subject area and to perform thorough reviews, will normally
-increase the liklihood of your patch getting into the kernel.
+increase the likelihood of your patch getting into the kernel.
 
 
 15) The canonical patch format
@@ -485,12 +496,33 @@ phrase" should not be a filename.  Do not use the same "summary
 phrase" for every patch in a whole patch series (where a "patch
 series" is an ordered sequence of multiple, related patches).
 
-Bear in mind that the "summary phrase" of your email becomes
-a globally-unique identifier for that patch.  It propagates
-all the way into the git changelog.  The "summary phrase" may
-later be used in developer discussions which refer to the patch.
-People will want to google for the "summary phrase" to read
-discussion regarding that patch.
+Bear in mind that the "summary phrase" of your email becomes a
+globally-unique identifier for that patch.  It propagates all the way
+into the git changelog.  The "summary phrase" may later be used in
+developer discussions which refer to the patch.  People will want to
+google for the "summary phrase" to read discussion regarding that
+patch.  It will also be the only thing that people may quickly see
+when, two or three months later, they are going through perhaps
+thousands of patches using tools such as "gitk" or "git log
+--oneline".
+
+For these reasons, the "summary" must be no more than 70-75
+characters, and it must describe both what the patch changes, as well
+as why the patch might be necessary.  It is challenging to be both
+succinct and descriptive, but that is what a well-written summary
+should do.
+
+The "summary phrase" may be prefixed by tags enclosed in square
+brackets: "Subject: [PATCH tag] <summary phrase>".  The tags are not
+considered part of the summary phrase, but describe how the patch
+should be treated.  Common tags might include a version descriptor if
+the multiple versions of the patch have been sent out in response to
+comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for
+comments.  If there are four patches in a patch series the individual
+patches may be numbered like this: 1/4, 2/4, 3/4, 4/4.  This assures
+that developers understand the order in which the patches should be
+applied and that they have reviewed or applied all of the patches in
+the patch series.
 
 A couple of example Subjects:
 
@@ -510,19 +542,31 @@ the patch author in the changelog.
 The explanation body will be committed to the permanent source
 changelog, so should make sense to a competent reader who has long
 since forgotten the immediate details of the discussion that might
-have led to this patch.
+have led to this patch.  Including symptoms of the failure which the
+patch addresses (kernel log messages, oops messages, etc.) is
+especially useful for people who might be searching the commit logs
+looking for the applicable patch.  If a patch fixes a compile failure,
+it may not be necessary to include _all_ of the compile failures; just
+enough that it is likely that someone searching for the patch can find
+it.  As in the "summary phrase", it is important to be both succinct as
+well as descriptive.
 
 The "---" marker line serves the essential purpose of marking for patch
 handling tools where the changelog message ends.
 
 One good use for the additional comments after the "---" marker is for
-a diffstat, to show what files have changed, and the number of inserted
-and deleted lines per file.  A diffstat is especially useful on bigger
-patches.  Other comments relevant only to the moment or the maintainer,
-not suitable for the permanent changelog, should also go here.
-Use diffstat options "-p 1 -w 70" so that filenames are listed from the
-top of the kernel source tree and don't use too much horizontal space
-(easily fit in 80 columns, maybe with some indentation).
+a diffstat, to show what files have changed, and the number of
+inserted and deleted lines per file.  A diffstat is especially useful
+on bigger patches.  Other comments relevant only to the moment or the
+maintainer, not suitable for the permanent changelog, should also go
+here.  A good example of such comments might be "patch changelogs"
+which describe what has changed between the v1 and v2 version of the
+patch.
+
+If you are going to include a diffstat after the "---" marker, please
+use diffstat options "-p 1 -w 70" so that filenames are listed from
+the top of the kernel source tree and don't use too much horizontal
+space (easily fit in 80 columns, maybe with some indentation).
 
 See more details on the proper patch format in the following
 references.
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc4b27..948c8718d96 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 6fab97ea7e6..8d2158a1c6a 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-mapping.txt for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt
index 72576769e0f..2d82c80322c 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.txt
@@ -58,7 +58,7 @@ same criteria as reads.
 front_merges	(bool)
 ------------
 
-Sometimes it happens that a request enters the io scheduler that is contigious
+Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
 request, or it fits at the front. That is called either a back merge candidate
 or a front merge candidate. Due to the way files are typically laid out,
diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt
index 000b0fbdc10..d0d042c2fd5 100644
--- a/Documentation/braille-console.txt
+++ b/Documentation/braille-console.txt
@@ -27,7 +27,7 @@ parameter.
 
 For simplicity, only one braille console can be enabled, other uses of
 console=brl,... will be discarded.  Also note that it does not interfere with
-the console selection mecanism described in serial-console.txt
+the console selection mechanism described in serial-console.txt
 
 For now, only the VisioBraille device is supported.
 
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index c11b931f8f9..15174985ad0 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -76,9 +76,9 @@ Do the steps below to download the BIOS image.
 
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
-echo -1 > /sys/class/firmware/dell_rbu/loading.
+echo -1 > /sys/class/firmware/dell_rbu/loading
 Until this step is completed the driver cannot be unloaded.
-Also echoing either mono ,packet or init in to image_type will free up the
+Also echoing either mono, packet or init in to image_type will free up the
 memory allocated by the driver.
 
 If a user by accident executes steps 1 and 3 above without executing step 2;
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting
index dd48132a74d..f622c1e9f0f 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting
@@ -119,7 +119,7 @@ which takes quite a bit of time and thought after the "real work" has been
 done.  When done properly, though, it is time well spent.
 
 
-5.4: PATCH FORMATTING
+5.4: PATCH FORMATTING AND CHANGELOGS
 
 So now you have a perfect series of patches for posting, but the work is
 not done quite yet.  Each patch needs to be formatted into a message which
@@ -146,8 +146,33 @@ that end, each patch will be composed of the following:
  - One or more tag lines, with, at a minimum, one Signed-off-by: line from
    the author of the patch.  Tags will be described in more detail below.
 
-The above three items should, normally, be the text used when committing
-the change to a revision control system.  They are followed by:
+The items above, together, form the changelog for the patch.  Writing good
+changelogs is a crucial but often-neglected art; it's worth spending
+another moment discussing this issue.  When writing a changelog, you should
+bear in mind that a number of different people will be reading your words.
+These include subsystem maintainers and reviewers who need to decide
+whether the patch should be included, distributors and other maintainers
+trying to decide whether a patch should be backported to other kernels, bug
+hunters wondering whether the patch is responsible for a problem they are
+chasing, users who want to know how the kernel has changed, and more.  A
+good changelog conveys the needed information to all of these people in the
+most direct and concise way possible.
+
+To that end, the summary line should describe the effects of and motivation
+for the change as well as possible given the one-line constraint.  The
+detailed description can then amplify on those topics and provide any
+needed additional information.  If the patch fixes a bug, cite the commit
+which introduced the bug if possible.  If a problem is associated with
+specific log or compiler output, include that output to help others
+searching for a solution to the same problem.  If the change is meant to
+support other changes coming in later patch, say so.  If internal APIs are
+changed, detail those changes and how other developers should respond.  In
+general, the more you can put yourself into the shoes of everybody who will
+be reading your changelog, the better that changelog (and the kernel as a
+whole) will be.
+
+Needless to say, the changelog should be the text used when committing the
+change to a revision control system.  It will be followed by:
 
  - The patch itself, in the unified ("-u") patch format.  Using the "-p"
    option to diff will associate function names with changes, making the
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 387b8a720f4..d79aead9418 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -188,7 +188,7 @@ For example, you can do something like the following.
 
   void my_midlayer_destroy_something()
   {
-	devres_release_group(dev, my_midlayer_create_soemthing);
+	devres_release_group(dev, my_midlayer_create_something);
   }
 
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 8eda3fb6641..06f8f46692d 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'.
 The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
 for EDAC development, before it is sent upstream to kernel.org
 
-At the bluesmoke/EDAC project site, is a series of quilt patches against
-recent kernels, stored in a SVN respository. For easier downloading, there
+At the bluesmoke/EDAC project site is a series of quilt patches against
+recent kernels, stored in a SVN repository. For easier downloading, there
 is also a tarball snapshot available.
 
 ============================================================================
@@ -73,9 +73,9 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a pci device attribute located in sysfs that is
+In the kernel there is a PCI device attribute located in sysfs that is
 checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scannining is skipped for that device. The attribute
+PCI parity/error scanning is skipped for that device. The attribute
 is:
 
 	broken_parity_status
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
index c87bfe5c630..b994c3b1054 100644
--- a/Documentation/fb/sh7760fb.txt
+++ b/Documentation/fb/sh7760fb.txt
@@ -1,7 +1,7 @@
 SH7760/SH7763 integrated LCDC Framebuffer driver
 ================================================
 
-0. Overwiew
+0. Overview
 -----------
 The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
 supports (in theory) resolutions ranging from 1x1 to 1024x1024,
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index de491a3e231..ec9ef5d0d7b 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -437,3 +437,13 @@ Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
 	driver but this caused driver conflicts.
 Who:	Jean Delvare <khali@linux-fr.org>
 	Krzysztof Helt <krzysztof.h1@wp.pl>
+
+----------------------------
+
+What:	CONFIG_X86_OLD_MCE
+When:	2.6.32
+Why:	Remove the old legacy 32bit machine check code. This has been
+	superseded by the newer machine check code from the 64bit port,
+	but the old version has been kept around for easier testing. Note this
+	doesn't impact the old P5 and WinChip machine check handlers.
+Who:	Andi Kleen <andi@firstfloor.org>
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index c6341745df3..8f78ded4b64 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -369,7 +369,7 @@ The call requires an initialized struct autofs_dev_ioctl. There are two
 possible variations. Both use the path field set to the path of the mount
 point to check and the size field adjusted appropriately. One uses the
 ioctlfd field to identify a specific mount point to check while the other
-variation uses the path and optionaly arg1 set to an autofs mount type.
+variation uses the path and optionally arg1 set to an autofs mount type.
 The call returns 1 if this is a mount point and sets arg1 to the device
 number of the mount and field arg2 to the relevant super block magic
 number (described below) or 0 if it isn't a mountpoint. In both cases
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 4db125b3a5c..2666b1ed5e9 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -184,7 +184,7 @@ This has the following fields:
      have index children.
 
      If this function is not supplied or if it returns NULL then the first
-     cache in the parent's list will be chosed, or failing that, the first
+     cache in the parent's list will be chosen, or failing that, the first
      cache in the master list.
 
  (4) A function to retrieve an object's key from the netfs [mandatory].
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
new file mode 100644
index 00000000000..ed52af60c2d
--- /dev/null
+++ b/Documentation/filesystems/debugfs.txt
@@ -0,0 +1,158 @@
+Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+
+Debugfs exists as a simple way for kernel developers to make information
+available to user space.  Unlike /proc, which is only meant for information
+about a process, or sysfs, which has strict one-value-per-file rules,
+debugfs has no rules at all.  Developers can put any information they want
+there.  The debugfs filesystem is also intended to not serve as a stable
+ABI to user space; in theory, there are no stability constraints placed on
+files exported there.  The real world is not always so simple, though [1];
+even debugfs interfaces are best designed with the idea that they will need
+to be maintained forever.
+
+Debugfs is typically mounted with a command like:
+
+    mount -t debugfs none /sys/kernel/debug
+
+(Or an equivalent /etc/fstab line). 
+
+Note that the debugfs API is exported GPL-only to modules.
+
+Code using debugfs should include <linux/debugfs.h>.  Then, the first order
+of business will be to create at least one directory to hold a set of
+debugfs files:
+
+    struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
+
+This call, if successful, will make a directory called name underneath the
+indicated parent directory.  If parent is NULL, the directory will be
+created in the debugfs root.  On success, the return value is a struct
+dentry pointer which can be used to create files in the directory (and to
+clean it up at the end).  A NULL return value indicates that something went
+wrong.  If ERR_PTR(-ENODEV) is returned, that is an indication that the
+kernel has been built without debugfs support and none of the functions
+described below will work.
+
+The most general way to create a file within a debugfs directory is with:
+
+    struct dentry *debugfs_create_file(const char *name, mode_t mode,
+				       struct dentry *parent, void *data,
+				       const struct file_operations *fops);
+
+Here, name is the name of the file to create, mode describes the access
+permissions the file should have, parent indicates the directory which
+should hold the file, data will be stored in the i_private field of the
+resulting inode structure, and fops is a set of file operations which
+implement the file's behavior.  At a minimum, the read() and/or write()
+operations should be provided; others can be included as needed.  Again,
+the return value will be a dentry pointer to the created file, NULL for
+error, or ERR_PTR(-ENODEV) if debugfs support is missing.
+
+In a number of cases, the creation of a set of file operations is not
+actually necessary; the debugfs code provides a number of helper functions
+for simple situations.  Files containing a single integer value can be
+created with any of:
+
+    struct dentry *debugfs_create_u8(const char *name, mode_t mode,
+				     struct dentry *parent, u8 *value);
+    struct dentry *debugfs_create_u16(const char *name, mode_t mode,
+				      struct dentry *parent, u16 *value);
+    struct dentry *debugfs_create_u32(const char *name, mode_t mode,
+				      struct dentry *parent, u32 *value);
+    struct dentry *debugfs_create_u64(const char *name, mode_t mode,
+				      struct dentry *parent, u64 *value);
+
+These files support both reading and writing the given value; if a specific
+file should not be written to, simply set the mode bits accordingly.  The
+values in these files are in decimal; if hexadecimal is more appropriate,
+the following functions can be used instead:
+
+    struct dentry *debugfs_create_x8(const char *name, mode_t mode,
+				     struct dentry *parent, u8 *value);
+    struct dentry *debugfs_create_x16(const char *name, mode_t mode,
+				      struct dentry *parent, u16 *value);
+    struct dentry *debugfs_create_x32(const char *name, mode_t mode,
+				      struct dentry *parent, u32 *value);
+
+Note that there is no debugfs_create_x64().
+
+These functions are useful as long as the developer knows the size of the
+value to be exported.  Some types can have different widths on different
+architectures, though, complicating the situation somewhat.  There is a
+function meant to help out in one special case:
+
+    struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+				         struct dentry *parent, 
+					 size_t *value);
+
+As might be expected, this function will create a debugfs file to represent
+a variable of type size_t.
+
+Boolean values can be placed in debugfs with:
+
+    struct dentry *debugfs_create_bool(const char *name, mode_t mode,
+				       struct dentry *parent, u32 *value);
+
+A read on the resulting file will yield either Y (for non-zero values) or
+N, followed by a newline.  If written to, it will accept either upper- or
+lower-case values, or 1 or 0.  Any other input will be silently ignored.
+
+Finally, a block of arbitrary binary data can be exported with:
+
+    struct debugfs_blob_wrapper {
+	void *data;
+	unsigned long size;
+    };
+
+    struct dentry *debugfs_create_blob(const char *name, mode_t mode,
+				       struct dentry *parent,
+				       struct debugfs_blob_wrapper *blob);
+
+A read of this file will return the data pointed to by the
+debugfs_blob_wrapper structure.  Some drivers use "blobs" as a simple way
+to return several lines of (static) formatted text output.  This function
+can be used to export binary information, but there does not appear to be
+any code which does so in the mainline.  Note that all files created with
+debugfs_create_blob() are read-only.
+
+There are a couple of other directory-oriented helper functions:
+
+    struct dentry *debugfs_rename(struct dentry *old_dir, 
+    				  struct dentry *old_dentry,
+		                  struct dentry *new_dir, 
+				  const char *new_name);
+
+    struct dentry *debugfs_create_symlink(const char *name, 
+                                          struct dentry *parent,
+				      	  const char *target);
+
+A call to debugfs_rename() will give a new name to an existing debugfs
+file, possibly in a different directory.  The new_name must not exist prior
+to the call; the return value is old_dentry with updated information.
+Symbolic links can be created with debugfs_create_symlink().
+
+There is one important thing that all debugfs users must take into account:
+there is no automatic cleanup of any directories created in debugfs.  If a
+module is unloaded without explicitly removing debugfs entries, the result
+will be a lot of stale pointers and no end of highly antisocial behavior.
+So all debugfs users - at least those which can be built as modules - must
+be prepared to remove all files and directories they create there.  A file
+can be removed with:
+
+    void debugfs_remove(struct dentry *dentry);
+
+The dentry value can be NULL, in which case nothing will be removed.
+
+Once upon a time, debugfs users were required to remember the dentry
+pointer for every debugfs file they created so that all files could be
+cleaned up.  We live in more civilized times now, though, and debugfs users
+can call:
+
+    void debugfs_remove_recursive(struct dentry *dentry);
+
+If this function is passed a pointer for the dentry corresponding to the
+top-level directory, the entire hierarchy below that directory will be
+removed.
+
+Notes:
+	[1] http://lwn.net/Articles/309298/
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 97882df0486..608fdba97b7 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -294,7 +294,7 @@ max_batch_time=usec	Maximum amount of time ext4 should wait for
 			amount of time (on average) that it takes to
 			finish committing a transaction.  Call this time
 			the "commit time".  If the time that the
-			transactoin has been running is less than the
+			transaction has been running is less than the
 			commit time, ext4 will try sleeping for the
 			commit time to see if other operations will join
 			the transaction.   The commit time is capped by
@@ -328,7 +328,7 @@ noauto_da_alloc		replacing existing files via patterns such as
 			journal commit, in the default data=ordered
 			mode, the data blocks of the new file are forced
 			to disk before the rename() operation is
-			commited.  This provides roughly the same level
+			committed.  This provides roughly the same level
 			of guarantees as ext3, and avoids the
 			"zero-length" problem that can happen when a
 			system crashes before the delayed allocation
@@ -358,7 +358,7 @@ written to the journal first, and then to its final location.
 In the event of a crash, the journal can be replayed, bringing both data and
 metadata into a consistent state.  This mode is the slowest except when data
 needs to be read from and written to disk at the same time where it
-outperforms all others modes.  Curently ext4 does not have delayed
+outperforms all others modes.  Currently ext4 does not have delayed
 allocation support if this data journalling mode is selected.
 
 References
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 1e3defcfe50..606233cd461 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -204,7 +204,7 @@ fiemap_check_flags() helper:
 
 int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
 
-The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The
+The struct fieinfo should be passed in as received from ioctl_fiemap(). The
 set of fiemap flags which the fs understands should be passed via fs_flags. If
 fiemap_check_flags finds invalid user flags, it will place the bad values in
 fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from
diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt
index 4dae9a3840b..0494f78d87e 100644
--- a/Documentation/filesystems/gfs2-glocks.txt
+++ b/Documentation/filesystems/gfs2-glocks.txt
@@ -60,7 +60,7 @@ go_lock          | Called for the first local holder of a lock
 go_unlock        | Called on the final local unlock of a lock
 go_dump          | Called to print content of object for debugfs file, or on
                  | error to dump glock to the log.
-go_type;         | The type of the glock, LM_TYPE_.....
+go_type          | The type of the glock, LM_TYPE_.....
 go_min_hold_time | The minimum hold time
 
 The minimum hold time for each lock is the time after a remote lock
diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt
index 593004b6bba..5e3ab8f3bef 100644
--- a/Documentation/filesystems/gfs2.txt
+++ b/Documentation/filesystems/gfs2.txt
@@ -11,18 +11,15 @@ their I/O so file system consistency is maintained.  One of the nifty
 features of GFS is perfect consistency -- changes made to the file system
 on one machine show up immediately on all other machines in the cluster.
 
-GFS uses interchangable inter-node locking mechanisms.  Different lock
-modules can plug into GFS and each file system selects the appropriate
-lock module at mount time.  Lock modules include:
+GFS uses interchangable inter-node locking mechanisms, the currently
+supported mechanisms are:
 
   lock_nolock -- allows gfs to be used as a local file system
 
   lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking
   The dlm is found at linux/fs/dlm/
 
-In addition to interfacing with an external locking manager, a gfs lock
-module is responsible for interacting with external cluster management
-systems.  Lock_dlm depends on user space cluster management systems found
+Lock_dlm depends on user space cluster management systems found
 at the URL above.
 
 To use gfs as a local file system, no external clustering systems are
@@ -31,13 +28,19 @@ needed, simply:
   $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device
   $ mount -t gfs2 /dev/block_device /dir
 
-GFS2 is not on-disk compatible with previous versions of GFS.
+If you are using Fedora, you need to install the gfs2-utils package
+and, for lock_dlm, you will also need to install the cman package
+and write a cluster.conf as per the documentation.
+
+GFS2 is not on-disk compatible with previous versions of GFS, but it
+is pretty close.
 
 The following man pages can be found at the URL above:
-  gfs2_fsck	to repair a filesystem
+  fsck.gfs2	to repair a filesystem
   gfs2_grow	to expand a filesystem online
   gfs2_jadd	to add journals to a filesystem online
   gfs2_tool	to manipulate, examine and tune a filesystem
   gfs2_quota	to examine and change quota values in a filesystem
+  gfs2_convert	to convert a gfs filesystem to gfs2 in-place
   mount.gfs2	to help mount(8) mount a filesystem
   mkfs.gfs2	to make a filesystem
diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt
index 85eaeaddd27..e386f7e4bce 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs-rdma.txt
@@ -100,7 +100,7 @@ Installation
     $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
 
     In this location, mount.nfs will be invoked automatically for NFS mounts
-    by the system mount commmand.
+    by the system mount command.
 
     NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
     on the NFS client machine. You do not need this specific version of
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ce84cfc9eae..cd8717a3627 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -366,7 +366,7 @@ just those considered 'most important'.  The new vectors are:
   RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
   sent from one CPU to another per the needs of the OS.  Typically,
   their statistics are used by kernel developers and interested users to
-  determine the occurance of interrupt of the given type.
+  determine the occurrence of interrupts of the given type.
 
 The above IRQ vectors are displayed only when relevent.  For example,
 the threshold vector does not exist on x86_64 platforms.  Others are
@@ -551,7 +551,7 @@ Committed_AS: The amount of memory presently allocated on the system.
               memory once that memory has been successfully allocated.
 VmallocTotal: total size of vmalloc memory area
  VmallocUsed: amount of vmalloc area which is used
-VmallocChunk: largest contigious block of vmalloc area which is free
+VmallocChunk: largest contiguous block of vmalloc area which is free
 
 ..............................................................................
 
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 26e4b8bc53e..85354b32d73 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -72,7 +72,7 @@ The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
 call, and disable it following the access by writing "0" to the file.  Note
-that the device must be enabled for a rom read to return data succesfully.
+that the device must be enabled for a rom read to return data successfully.
 In the event a driver is not bound to the device, it can be enabled using the
 'enable' file, documented above.
 
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index 222437efd75..3015da0c6b2 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 4 June 2007
+   Hugh Dickins, 4 June 2007
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 3a5ddc96901..5147be5e13c 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -124,10 +124,10 @@ sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as
 flush         -- If set, the filesystem will try to flush to disk more
 		 early than normal. Not set by default.
 
-rodir	      -- FAT has the ATTR_RO (read-only) attribute. But on Windows,
-		 the ATTR_RO of the directory will be just ignored actually,
-		 and is used by only applications as flag. E.g. it's setted
-		 for the customized folder.
+rodir	      -- FAT has the ATTR_RO (read-only) attribute. On Windows,
+		 the ATTR_RO of the directory will just be ignored,
+		 and is used only by applications as a flag (e.g. it's set
+		 for the customized folder).
 
 		 If you want to use ATTR_RO as read-only flag even for
 		 the directory, set this option.
diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt
new file mode 100644
index 00000000000..9dc1ff4fd53
--- /dev/null
+++ b/Documentation/futex-requeue-pi.txt
@@ -0,0 +1,131 @@
+Futex Requeue PI
+----------------
+
+Requeueing of tasks from a non-PI futex to a PI futex requires
+special handling in order to ensure the underlying rt_mutex is never
+left without an owner if it has waiters; doing so would break the PI
+boosting logic [see rt-mutex-desgin.txt] For the purposes of
+brevity, this action will be referred to as "requeue_pi" throughout
+this document.  Priority inheritance is abbreviated throughout as
+"PI".
+
+Motivation
+----------
+
+Without requeue_pi, the glibc implementation of
+pthread_cond_broadcast() must resort to waking all the tasks waiting
+on a pthread_condvar and letting them try to sort out which task
+gets to run first in classic thundering-herd formation.  An ideal
+implementation would wake the highest-priority waiter, and leave the
+rest to the natural wakeup inherent in unlocking the mutex
+associated with the condvar.
+
+Consider the simplified glibc calls:
+
+/* caller must lock mutex */
+pthread_cond_wait(cond, mutex)
+{
+	lock(cond->__data.__lock);
+	unlock(mutex);
+	do {
+	   unlock(cond->__data.__lock);
+	   futex_wait(cond->__data.__futex);
+	   lock(cond->__data.__lock);
+	} while(...)
+	unlock(cond->__data.__lock);
+	lock(mutex);
+}
+
+pthread_cond_broadcast(cond)
+{
+	lock(cond->__data.__lock);
+	unlock(cond->__data.__lock);
+	futex_requeue(cond->data.__futex, cond->mutex);
+}
+
+Once pthread_cond_broadcast() requeues the tasks, the cond->mutex
+has waiters. Note that pthread_cond_wait() attempts to lock the
+mutex only after it has returned to user space.  This will leave the
+underlying rt_mutex with waiters, and no owner, breaking the
+previously mentioned PI-boosting algorithms.
+
+In order to support PI-aware pthread_condvar's, the kernel needs to
+be able to requeue tasks to PI futexes.  This support implies that
+upon a successful futex_wait system call, the caller would return to
+user space already holding the PI futex.  The glibc implementation
+would be modified as follows:
+
+
+/* caller must lock mutex */
+pthread_cond_wait_pi(cond, mutex)
+{
+	lock(cond->__data.__lock);
+	unlock(mutex);
+	do {
+	   unlock(cond->__data.__lock);
+	   futex_wait_requeue_pi(cond->__data.__futex);
+	   lock(cond->__data.__lock);
+	} while(...)
+	unlock(cond->__data.__lock);
+        /* the kernel acquired the the mutex for us */
+}
+
+pthread_cond_broadcast_pi(cond)
+{
+	lock(cond->__data.__lock);
+	unlock(cond->__data.__lock);
+	futex_requeue_pi(cond->data.__futex, cond->mutex);
+}
+
+The actual glibc implementation will likely test for PI and make the
+necessary changes inside the existing calls rather than creating new
+calls for the PI cases.  Similar changes are needed for
+pthread_cond_timedwait() and pthread_cond_signal().
+
+Implementation
+--------------
+
+In order to ensure the rt_mutex has an owner if it has waiters, it
+is necessary for both the requeue code, as well as the waiting code,
+to be able to acquire the rt_mutex before returning to user space.
+The requeue code cannot simply wake the waiter and leave it to
+acquire the rt_mutex as it would open a race window between the
+requeue call returning to user space and the waiter waking and
+starting to run.  This is especially true in the uncontended case.
+
+The solution involves two new rt_mutex helper routines,
+rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which
+allow the requeue code to acquire an uncontended rt_mutex on behalf
+of the waiter and to enqueue the waiter on a contended rt_mutex.
+Two new system calls provide the kernel<->user interface to
+requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI.
+
+FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait()
+and pthread_cond_timedwait()) to block on the initial futex and wait
+to be requeued to a PI-aware futex.  The implementation is the
+result of a high-speed collision between futex_wait() and
+futex_lock_pi(), with some extra logic to check for the additional
+wake-up scenarios.
+
+FUTEX_REQUEUE_CMP_PI is called by the waker
+(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and
+possibly wake the waiting tasks. Internally, this system call is
+still handled by futex_requeue (by passing requeue_pi=1).  Before
+requeueing, futex_requeue() attempts to acquire the requeue target
+PI futex on behalf of the top waiter.  If it can, this waiter is
+woken.  futex_requeue() then proceeds to requeue the remaining
+nr_wake+nr_requeue tasks to the PI futex, calling
+rt_mutex_start_proxy_lock() prior to each requeue to prepare the
+task as a waiter on the underlying rt_mutex.  It is possible that
+the lock can be acquired at this stage as well, if so, the next
+waiter is woken to finish the acquisition of the lock.
+
+FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
+their sum is all that really matters.  futex_requeue() will wake or
+requeue up to nr_wake + nr_requeue tasks.  It will wake only as many
+tasks as it can acquire the lock for, which in the majority of cases
+should be 0 as good programming practice dictates that the caller of
+either pthread_cond_broadcast() or pthread_cond_signal() acquire the
+mutex prior to making the call. FUTEX_REQUEUE_PI requires that
+nr_wake=1.  nr_requeue should be INT_MAX for broadcast and 0 for
+signal.
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 145c25a170c..e4b6985044a 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -458,7 +458,7 @@ debugfs interface, since it provides control over GPIO direction and
 value instead of just showing a gpio state summary.  Plus, it could be
 present on production systems without debugging support.
 
-Given approprate hardware documentation for the system, userspace could
+Given appropriate hardware documentation for the system, userspace could
 know for example that GPIO #23 controls the write protect line used to
 protect boot loader segments in flash memory.  System upgrade procedures
 may need to temporarily remove that protection, first importing a GPIO,
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 2f10ce6a879..004ee161721 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -150,6 +150,11 @@ fan[1-*]_min	Fan minimum value
 		Unit: revolution/min (RPM)
 		RW
 
+fan[1-*]_max	Fan maximum value
+		Unit: revolution/min (RPM)
+		Only rarely supported by the hardware.
+		RW
+
 fan[1-*]_input	Fan input value.
 		Unit: revolution/min (RPM)
 		RO
@@ -390,6 +395,7 @@ OR
 in[0-*]_min_alarm
 in[0-*]_max_alarm
 fan[1-*]_min_alarm
+fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
 temp[1-*]_crit_alarm
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index cfcebb10d14..c269aaa2f26 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The
 dev.platform_data of the device should also point to a struct
 ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
 distance between registers and the input clock speed.
+There is also a possibility to attach a list of i2c_board_info which
+the i2c-ocores driver will add to the bus upon creation.
 
 E.G. something like:
 
@@ -36,9 +38,24 @@ static struct resource ocores_resources[] = {
 	},
 };
 
+/* optional board info */
+struct i2c_board_info ocores_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tsc2003", 0x48),
+		.platform_data = &tsc2003_platform_data,
+		.irq = TSC_IRQ
+	},
+	{
+		I2C_BOARD_INFO("adv7180", 0x42 >> 1),
+		.irq = ADV_IRQ
+	}
+};
+
 static struct ocores_i2c_platform_data myi2c_data = {
 	.regstep	= 2,		/* two bytes between registers */
 	.clock_khz	= 50000,	/* input clock of 50MHz */
+	.devices	= ocores_i2c_board_info, /* optional table of devices */
+	.num_devices	= ARRAY_SIZE(ocores_i2c_board_info), /* table size */
 };
 
 static struct platform_device myi2c = {
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index 0c78f4b1d9d..e77bebfa7b0 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -216,6 +216,8 @@ Other kernel parameters for ide_core are:
 
 * "noflush=[interface_number.device_number]" to disable flush requests
 
+* "nohpa=[interface_number.device_number]" to disable Host Protected Area
+
 * "noprobe=[interface_number.device_number]" to skip probing
 
 * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 9f09557aea3..a12ea3b586e 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -18,8 +18,12 @@ Usage
 Anonymous finger details are sent sequentially as separate packets of ABS
 events. Only the ABS_MT events are recognized as part of a finger
 packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
@@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
 ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
 device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
 of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else.  Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
 
 
 Event Semantics
@@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
 surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
 
 ABS_MT_TOUCH_MINOR
 
 The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
 
 ABS_MT_WIDTH_MAJOR
 
 The length, in surface units, of the major axis of the approaching
 tool. This should be understood as the size of the tool itself. The
 orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
 
 ABS_MT_WIDTH_MINOR
 
 The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
 
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@ different characteristic widths [1].
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned.  Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
 
 ABS_MT_POSITION_X
 
@@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
 contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+   ABS_MT_TOUCH_MAJOR := max(X, Y)
+   ABS_MT_TOUCH_MINOR := min(X, Y)
+   ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
 
 
 Finger Tracking
@@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
 anonymous contacts currently on the surface. The order in which the packets
 appear in the event stream is not important.
 
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
 initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
 unique until the contact vanishes (when the finger leaves the surface). The
 problem of assigning a set of anonymous fingers to a set of identified
 fingers is a euclidian bipartite matching problem at each event update, and
 relies on a sufficiently rapid update rate.
 
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
 Notes
 -----
 
@@ -136,5 +189,7 @@ could be used to derive tilt.
 time of writing (April 2009), the MT protocol is not yet merged, and the
 prototype implements finger matching, basic mouse support and two-finger
 scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
 implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 3f4bc840da8..cab61d84225 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -108,7 +108,7 @@ There are two possible methods of using Kdump.
 
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
-   only with the architecutres which support a relocatable kernel. As
+   only with the architectures which support a relocatable kernel. As
    of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
    kernel.
 
@@ -222,7 +222,7 @@ Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
 
 - No specific options are required to create a dump-capture kernel
-  for ia64, other than those specified in the arch idependent section
+  for ia64, other than those specified in the arch independent section
   above. This means that it is possible to use the system kernel
   as a dump-capture kernel if desired.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e87bdbfbcc7..5f66ba295c5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -56,7 +56,6 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
-	KMEMTRACE kmemtrace is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				    flushed before they will be reused, which
 				    is a lot of faster
 
-	amd_iommu_size= [HW,X86-64]
-			Define the size of the aperture for the AMD IOMMU
-			driver. Possible values are:
-			'32M', '64M' (default), '128M', '256M', '512M', '1G'
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -646,6 +640,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			DMA-API debugging code disables itself because the
 			architectural default is too low.
 
+	dma_debug_driver=<driver_name>
+			With this option the DMA-API debugging driver
+			filter feature can be enabled at boot time. Just
+			pass the driver to filter for as the parameter.
+			The filter can be disabled or changed to another
+			driver later using sysfs.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]
@@ -752,12 +753,25 @@ and is between 256 and 4096 characters. It is defined in the file
 			ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
 
 	ftrace=[tracer]
-			[ftrace] will set and start the specified tracer
+			[FTRACE] will set and start the specified tracer
 			as early as possible in order to facilitate early
 			boot debugging.
 
 	ftrace_dump_on_oops
-			[ftrace] will dump the trace buffers on oops.
+			[FTRACE] will dump the trace buffers on oops.
+
+	ftrace_filter=[function-list]
+			[FTRACE] Limit the functions traced by the function
+			tracer at boot up. function-list is a comma separated
+			list of functions. This list can be changed at run
+			time by the set_ftrace_filter file in the debugfs
+			tracing directory. 
+
+	ftrace_notrace=[function-list]
+			[FTRACE] Do not trace the functions specified in
+			function-list. This list can be changed at run time
+			by the set_ftrace_notrace file in the debugfs
+			tracing directory.
 
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
@@ -873,11 +887,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	ide-core.nodma=	[HW] (E)IDE subsystem
 			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
-			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
-			.chs .ignore_cable are additional options
-			See Documentation/ide/ide.txt.
-
-	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
+			.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
+			.cdrom .chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
@@ -914,6 +925,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Formt: { "sha1" | "md5" }
 			default: "sha1"
 
+	ima_tcb		[IMA]
+			Load a policy which meets the needs of the Trusted
+			Computing Base.  This means IMA will measure all
+			programs exec'd, files mmap'd for exec, and all files
+			opened for read by uid=0.
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -1054,24 +1071,19 @@ and is between 256 and 4096 characters. It is defined in the file
 			use the HighMem zone if it exists, and the Normal
 			zone if it does not.
 
-	kmemtrace.enable=	[KNL,KMEMTRACE] Format: { yes | no }
-				Controls whether kmemtrace is enabled
-				at boot-time.
-
-	kmemtrace.subbufs=n	[KNL,KMEMTRACE] Overrides the number of
-			subbufs kmemtrace's relay channel has. Set this
-			higher than default (KMEMTRACE_N_SUBBUFS in code) if
-			you experience buffer overruns.
-
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
-			(only serial suported for now)
+			(only serial supported for now)
 			Format: <serial_device>[,baud]
 
 	kmac=		[MIPS] korina ethernet MAC address.
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
+	kmemleak=	[KNL] Boot-time kmemleak enable/disable
+			Valid arguments: on, off
+			Default: on
+
 	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
@@ -1390,7 +1402,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			('y', default) or cooked coordinates ('n')
 
 	mtrr_chunk_size=nn[KMG] [X86]
-			used for mtrr cleanup. It is largest continous chunk
+			used for mtrr cleanup. It is largest continuous chunk
 			that could hold holes aka. UC entries.
 
 	mtrr_gran_size=nn[KMG] [X86]
@@ -1535,6 +1547,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
 	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.
@@ -1571,6 +1587,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
 
+	nointremap	[X86-64, Intel-IOMMU] Do not enable interrupt
+			remapping.
+
 	nointroute	[IA-64]
 
 	nojitter	[IA64] Disables jitter checking for ITC timers.
@@ -1656,6 +1675,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
+	oprofile.cpu_type=	Force an oprofile cpu type
+			This might be useful if you have an older oprofile
+			userland or if you want common events.
+			Format: { archperfmon }
+			archperfmon: [X86] Force use of architectural
+				perfmon on Intel CPUs instead of the
+				CPU specific event set.
+
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
new file mode 100644
index 00000000000..0112da3b9ab
--- /dev/null
+++ b/Documentation/kmemleak.txt
@@ -0,0 +1,142 @@
+Kernel Memory Leak Detector
+===========================
+
+Introduction
+------------
+
+Kmemleak provides a way of detecting possible kernel memory leaks in a
+way similar to a tracing garbage collector
+(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
+with the difference that the orphan objects are not freed but only
+reported via /sys/kernel/debug/kmemleak. A similar method is used by the
+Valgrind tool (memcheck --leak-check) to detect the memory leaks in
+user-space applications.
+
+Usage
+-----
+
+CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
+thread scans the memory every 10 minutes (by default) and prints any new
+unreferenced objects found. To trigger an intermediate scan and display
+all the possible memory leaks:
+
+  # mount -t debugfs nodev /sys/kernel/debug/
+  # cat /sys/kernel/debug/kmemleak
+
+Note that the orphan objects are listed in the order they were allocated
+and one object at the beginning of the list may cause other subsequent
+objects to be reported as orphan.
+
+Memory scanning parameters can be modified at run-time by writing to the
+/sys/kernel/debug/kmemleak file. The following parameters are supported:
+
+  off		- disable kmemleak (irreversible)
+  stack=on	- enable the task stacks scanning
+  stack=off	- disable the tasks stacks scanning
+  scan=on	- start the automatic memory scanning thread
+  scan=off	- stop the automatic memory scanning thread
+  scan=<secs>	- set the automatic memory scanning period in seconds (0
+		  to disable it)
+
+Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
+the kernel command line.
+
+Basic Algorithm
+---------------
+
+The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
+friends are traced and the pointers, together with additional
+information like size and stack trace, are stored in a prio search tree.
+The corresponding freeing function calls are tracked and the pointers
+removed from the kmemleak data structures.
+
+An allocated block of memory is considered orphan if no pointer to its
+start address or to any location inside the block can be found by
+scanning the memory (including saved registers). This means that there
+might be no way for the kernel to pass the address of the allocated
+block to a freeing function and therefore the block is considered a
+memory leak.
+
+The scanning algorithm steps:
+
+  1. mark all objects as white (remaining white objects will later be
+     considered orphan)
+  2. scan the memory starting with the data section and stacks, checking
+     the values against the addresses stored in the prio search tree. If
+     a pointer to a white object is found, the object is added to the
+     gray list
+  3. scan the gray objects for matching addresses (some white objects
+     can become gray and added at the end of the gray list) until the
+     gray set is finished
+  4. the remaining white objects are considered orphan and reported via
+     /sys/kernel/debug/kmemleak
+
+Some allocated memory blocks have pointers stored in the kernel's
+internal data structures and they cannot be detected as orphans. To
+avoid this, kmemleak can also store the number of values pointing to an
+address inside the block address range that need to be found so that the
+block is not considered a leak. One example is __vmalloc().
+
+Kmemleak API
+------------
+
+See the include/linux/kmemleak.h header for the functions prototype.
+
+kmemleak_init		 - initialize kmemleak
+kmemleak_alloc		 - notify of a memory block allocation
+kmemleak_free		 - notify of a memory block freeing
+kmemleak_not_leak	 - mark an object as not a leak
+kmemleak_ignore		 - do not scan or report an object as leak
+kmemleak_scan_area	 - add scan areas inside a memory block
+kmemleak_no_scan	 - do not scan a memory block
+kmemleak_erase		 - erase an old value in a pointer variable
+kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
+kmemleak_free_recursive	 - as kmemleak_free but checks the recursiveness
+
+Dealing with false positives/negatives
+--------------------------------------
+
+The false negatives are real memory leaks (orphan objects) but not
+reported by kmemleak because values found during the memory scanning
+point to such objects. To reduce the number of false negatives, kmemleak
+provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and
+kmemleak_erase functions (see above). The task stacks also increase the
+amount of false negatives and their scanning is not enabled by default.
+
+The false positives are objects wrongly reported as being memory leaks
+(orphan). For objects known not to be leaks, kmemleak provides the
+kmemleak_not_leak function. The kmemleak_ignore could also be used if
+the memory block is known not to contain other pointers and it will no
+longer be scanned.
+
+Some of the reported leaks are only transient, especially on SMP
+systems, because of pointers temporarily stored in CPU registers or
+stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing
+the minimum age of an object to be reported as a memory leak.
+
+Limitations and Drawbacks
+-------------------------
+
+The main drawback is the reduced performance of memory allocation and
+freeing. To avoid other penalties, the memory scanning is only performed
+when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is
+intended for debugging purposes where the performance might not be the
+most important requirement.
+
+To keep the algorithm simple, kmemleak scans for values pointing to any
+address inside a block's address range. This may lead to an increased
+number of false negatives. However, it is likely that a real memory leak
+will eventually become visible.
+
+Another source of false negatives is the data stored in non-pointer
+values. In a future version, kmemleak could only scan the pointer
+members in the allocated structures. This feature would solve many of
+the false negative cases described above.
+
+The tool can report false positives. These are cases where an allocated
+block doesn't need to be freed (some cases in the init_call functions),
+the pointer is calculated by other methods than the usual container_of
+macro or the pointer is stored in a location not scanned by kmemleak.
+
+Page allocations and ioremap are not tracked. Only the ARM and x86
+architectures are currently supported.
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index b2e374586bd..c79ab996dad 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -132,7 +132,7 @@ kobject_name():
     const char *kobject_name(const struct kobject * kobj);
 
 There is a helper function to both initialize and add the kobject to the
-kernel at the same time, called supprisingly enough kobject_init_and_add():
+kernel at the same time, called surprisingly enough kobject_init_and_add():
 
     int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype,
                              struct kobject *parent, const char *fmt, ...);
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 5ee2a02b3b4..0768fcc3ba3 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -40,7 +40,7 @@ NOTE: The Acer Aspire One is not supported hardware. It cannot work with
 acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been
 blacklisted until that happens.
 
-Please see the website for the current list of known working hardare:
+Please see the website for the current list of known working hardware:
 
 http://code.google.com/p/aceracpi/wiki/SupportedHardware
 
diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt
index 8b2bc1572d9..23ce7d350d1 100644
--- a/Documentation/laptops/sony-laptop.txt
+++ b/Documentation/laptops/sony-laptop.txt
@@ -22,7 +22,7 @@ If your laptop model supports it, you will find sysfs files in the
 /sys/class/backlight/sony/
 directory. You will be able to query and set the current screen
 brightness:
-	brightness		get/set screen brightness (an iteger
+	brightness		get/set screen brightness (an integer
 				between 0 and 7)
 	actual_brightness	reading from this file will query the HW
 				to get real brightness value
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index e7e9a69069e..78e354b42f6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -506,7 +506,7 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
-SW_RFKILL_ALL	T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL	T60 and later hardware rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 
 Non hot-key ACPI HKEY event map:
diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile
index 1f4f9e888bd..28c8cdfcafd 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/lguest/Makefile
@@ -1,6 +1,5 @@
 # This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
-LDLIBS:=-lz
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
 
 all: lguest
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index d36fcc0f271..9ebcd6ef361 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -16,6 +16,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/wait.h>
+#include <sys/eventfd.h>
 #include <fcntl.h>
 #include <stdbool.h>
 #include <errno.h>
@@ -59,7 +60,6 @@ typedef uint8_t u8;
 /*:*/
 
 #define PAGE_PRESENT 0x7 	/* Present, RW, Execute */
-#define NET_PEERNUM 1
 #define BRIDGE_PFX "bridge:"
 #ifndef SIOCBRADDIF
 #define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
@@ -76,19 +76,12 @@ static bool verbose;
 	do { if (verbose) printf(args); } while(0)
 /*:*/
 
-/* File descriptors for the Waker. */
-struct {
-	int pipe[2];
-	int lguest_fd;
-} waker_fds;
-
 /* The pointer to the start of guest memory. */
 static void *guest_base;
 /* The maximum guest physical address allowed, and maximum possible. */
 static unsigned long guest_limit, guest_max;
-/* The pipe for signal hander to write to. */
-static int timeoutpipe[2];
-static unsigned int timeout_usec = 500;
+/* The /dev/lguest file descriptor. */
+static int lguest_fd;
 
 /* a per-cpu variable indicating whose vcpu is currently running */
 static unsigned int __thread cpu_id;
@@ -96,11 +89,6 @@ static unsigned int __thread cpu_id;
 /* This is our list of devices. */
 struct device_list
 {
-	/* Summary information about the devices in our list: ready to pass to
-	 * select() to ask which need servicing.*/
-	fd_set infds;
-	int max_infd;
-
 	/* Counter to assign interrupt numbers. */
 	unsigned int next_irq;
 
@@ -126,22 +114,21 @@ struct device
 	/* The linked-list pointer. */
 	struct device *next;
 
-	/* The this device's descriptor, as mapped into the Guest. */
+	/* The device's descriptor, as mapped into the Guest. */
 	struct lguest_device_desc *desc;
 
+	/* We can't trust desc values once Guest has booted: we use these. */
+	unsigned int feature_len;
+	unsigned int num_vq;
+
 	/* The name of this device, for --verbose. */
 	const char *name;
 
-	/* If handle_input is set, it wants to be called when this file
-	 * descriptor is ready. */
-	int fd;
-	bool (*handle_input)(int fd, struct device *me);
-
 	/* Any queues attached to this device */
 	struct virtqueue *vq;
 
-	/* Handle status being finalized (ie. feature bits stable). */
-	void (*ready)(struct device *me);
+	/* Is it operational */
+	bool running;
 
 	/* Device-specific data. */
 	void *priv;
@@ -164,22 +151,28 @@ struct virtqueue
 	/* Last available index we saw. */
 	u16 last_avail_idx;
 
-	/* The routine to call when the Guest pings us, or timeout. */
-	void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
+	/* How many are used since we sent last irq? */
+	unsigned int pending_used;
 
-	/* Outstanding buffers */
-	unsigned int inflight;
+	/* Eventfd where Guest notifications arrive. */
+	int eventfd;
 
-	/* Is this blocked awaiting a timer? */
-	bool blocked;
+	/* Function for the thread which is servicing this virtqueue. */
+	void (*service)(struct virtqueue *vq);
+	pid_t thread;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
 static char **main_args;
 
-/* Since guest is UP and we don't run at the same time, we don't need barriers.
- * But I include them in the code in case others copy it. */
-#define wmb()
+/* The original tty settings to restore on exit. */
+static struct termios orig_term;
+
+/* We have to be careful with barriers: our devices are all run in separate
+ * threads and so we need to make sure that changes visible to the Guest happen
+ * in precise order. */
+#define wmb() __asm__ __volatile__("" : : : "memory")
+#define mb() __asm__ __volatile__("" : : : "memory")
 
 /* Convert an iovec element to the given type.
  *
@@ -245,7 +238,7 @@ static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
 static u8 *get_feature_bits(struct device *dev)
 {
 	return (u8 *)(dev->desc + 1)
-		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig);
+		+ dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
 /*L:100 The Launcher code itself takes us out into userspace, that scary place
@@ -505,99 +498,19 @@ static void concat(char *dst, char *args[])
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
  * entry point for the Guest. */
-static int tell_kernel(unsigned long start)
+static void tell_kernel(unsigned long start)
 {
 	unsigned long args[] = { LHREQ_INITIALIZE,
 				 (unsigned long)guest_base,
 				 guest_limit / getpagesize(), start };
-	int fd;
-
 	verbose("Guest: %p - %p (%#lx)\n",
 		guest_base, guest_base + guest_limit, guest_limit);
-	fd = open_or_die("/dev/lguest", O_RDWR);
-	if (write(fd, args, sizeof(args)) < 0)
+	lguest_fd = open_or_die("/dev/lguest", O_RDWR);
+	if (write(lguest_fd, args, sizeof(args)) < 0)
 		err(1, "Writing to /dev/lguest");
-
-	/* We return the /dev/lguest file descriptor to control this Guest */
-	return fd;
 }
 /*:*/
 
-static void add_device_fd(int fd)
-{
-	FD_SET(fd, &devices.infds);
-	if (fd > devices.max_infd)
-		devices.max_infd = fd;
-}
-
-/*L:200
- * The Waker.
- *
- * With console, block and network devices, we can have lots of input which we
- * need to process.  We could try to tell the kernel what file descriptors to
- * watch, but handing a file descriptor mask through to the kernel is fairly
- * icky.
- *
- * Instead, we clone off a thread which watches the file descriptors and writes
- * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
- * stop running the Guest.  This causes the Launcher to return from the
- * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
- * the LHREQ_BREAK and wake us up again.
- *
- * This, of course, is merely a different *kind* of icky.
- *
- * Given my well-known antipathy to threads, I'd prefer to use processes.  But
- * it's easier to share Guest memory with threads, and trivial to share the
- * devices.infds as the Launcher changes it.
- */
-static int waker(void *unused)
-{
-	/* Close the write end of the pipe: only the Launcher has it open. */
-	close(waker_fds.pipe[1]);
-
-	for (;;) {
-		fd_set rfds = devices.infds;
-		unsigned long args[] = { LHREQ_BREAK, 1 };
-		unsigned int maxfd = devices.max_infd;
-
-		/* We also listen to the pipe from the Launcher. */
-		FD_SET(waker_fds.pipe[0], &rfds);
-		if (waker_fds.pipe[0] > maxfd)
-			maxfd = waker_fds.pipe[0];
-
-		/* Wait until input is ready from one of the devices. */
-		select(maxfd+1, &rfds, NULL, NULL, NULL);
-
-		/* Message from Launcher? */
-		if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
-			char c;
-			/* If this fails, then assume Launcher has exited.
-			 * Don't do anything on exit: we're just a thread! */
-			if (read(waker_fds.pipe[0], &c, 1) != 1)
-				_exit(0);
-			continue;
-		}
-
-		/* Send LHREQ_BREAK command to snap the Launcher out of it. */
-		pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
-	}
-	return 0;
-}
-
-/* This routine just sets up a pipe to the Waker process. */
-static void setup_waker(int lguest_fd)
-{
-	/* This pipe is closed when Launcher dies, telling Waker. */
-	if (pipe(waker_fds.pipe) != 0)
-		err(1, "Creating pipe for Waker");
-
-	/* Waker also needs to know the lguest fd */
-	waker_fds.lguest_fd = lguest_fd;
-
-	if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
-		err(1, "Creating Waker");
-}
-
 /*
  * Device Handling.
  *
@@ -623,49 +536,90 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
 /* Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
  * at the end. */
-static unsigned next_desc(struct virtqueue *vq, unsigned int i)
+static unsigned next_desc(struct vring_desc *desc,
+			  unsigned int i, unsigned int max)
 {
 	unsigned int next;
 
 	/* If this descriptor says it doesn't chain, we're done. */
-	if (!(vq->vring.desc[i].flags & VRING_DESC_F_NEXT))
-		return vq->vring.num;
+	if (!(desc[i].flags & VRING_DESC_F_NEXT))
+		return max;
 
 	/* Check they're not leading us off end of descriptors. */
-	next = vq->vring.desc[i].next;
+	next = desc[i].next;
 	/* Make sure compiler knows to grab that: we don't want it changing! */
 	wmb();
 
-	if (next >= vq->vring.num)
+	if (next >= max)
 		errx(1, "Desc next is %u", next);
 
 	return next;
 }
 
+/* This actually sends the interrupt for this virtqueue */
+static void trigger_irq(struct virtqueue *vq)
+{
+	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+
+	/* Don't inform them if nothing used. */
+	if (!vq->pending_used)
+		return;
+	vq->pending_used = 0;
+
+	/* If they don't want an interrupt, don't send one, unless empty. */
+	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	    && lg_last_avail(vq) != vq->vring.avail->idx)
+		return;
+
+	/* Send the Guest an interrupt tell them we used something up. */
+	if (write(lguest_fd, buf, sizeof(buf)) != 0)
+		err(1, "Triggering irq %i", vq->config.irq);
+}
+
 /* This looks in the virtqueue and for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found, or vq->vring.num (which
- * is never a valid descriptor number) if none was found. */
-static unsigned get_vq_desc(struct virtqueue *vq,
-			    struct iovec iov[],
-			    unsigned int *out_num, unsigned int *in_num)
+ * This function returns the descriptor number found. */
+static unsigned wait_for_vq_desc(struct virtqueue *vq,
+				 struct iovec iov[],
+				 unsigned int *out_num, unsigned int *in_num)
 {
-	unsigned int i, head;
-	u16 last_avail;
+	unsigned int i, head, max;
+	struct vring_desc *desc;
+	u16 last_avail = lg_last_avail(vq);
+
+	while (last_avail == vq->vring.avail->idx) {
+		u64 event;
+
+		/* OK, tell Guest about progress up to now. */
+		trigger_irq(vq);
+
+		/* OK, now we need to know about added descriptors. */
+		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+
+		/* They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again. */
+		mb();
+		if (last_avail != vq->vring.avail->idx) {
+			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+			break;
+		}
+
+		/* Nothing new?  Wait for eventfd to tell us they refilled. */
+		if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
+			errx(1, "Event read failed?");
+
+		/* We don't need to be notified again. */
+		vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+	}
 
 	/* Check it isn't doing very strange things with descriptor numbers. */
-	last_avail = lg_last_avail(vq);
 	if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
 		errx(1, "Guest moved used index from %u to %u",
 		     last_avail, vq->vring.avail->idx);
 
-	/* If there's nothing new since last we looked, return invalid. */
-	if (vq->vring.avail->idx == last_avail)
-		return vq->vring.num;
-
 	/* Grab the next descriptor number they're advertising, and increment
 	 * the index we've seen. */
 	head = vq->vring.avail->ring[last_avail % vq->vring.num];
@@ -678,15 +632,28 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 	/* When we start there are none of either input nor output. */
 	*out_num = *in_num = 0;
 
+	max = vq->vring.num;
+	desc = vq->vring.desc;
 	i = head;
+
+	/* If this is an indirect entry, then this buffer contains a descriptor
+	 * table which we handle as if it's any normal descriptor chain. */
+	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+		if (desc[i].len % sizeof(struct vring_desc))
+			errx(1, "Invalid size for indirect buffer table");
+
+		max = desc[i].len / sizeof(struct vring_desc);
+		desc = check_pointer(desc[i].addr, desc[i].len);
+		i = 0;
+	}
+
 	do {
 		/* Grab the first descriptor, and check it's OK. */
-		iov[*out_num + *in_num].iov_len = vq->vring.desc[i].len;
+		iov[*out_num + *in_num].iov_len = desc[i].len;
 		iov[*out_num + *in_num].iov_base
-			= check_pointer(vq->vring.desc[i].addr,
-					vq->vring.desc[i].len);
+			= check_pointer(desc[i].addr, desc[i].len);
 		/* If this is an input descriptor, increment that count. */
-		if (vq->vring.desc[i].flags & VRING_DESC_F_WRITE)
+		if (desc[i].flags & VRING_DESC_F_WRITE)
 			(*in_num)++;
 		else {
 			/* If it's an output descriptor, they're all supposed
@@ -697,11 +664,10 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 		}
 
 		/* If we've got too many, that implies a descriptor loop. */
-		if (*out_num + *in_num > vq->vring.num)
+		if (*out_num + *in_num > max)
 			errx(1, "Looped descriptor");
-	} while ((i = next_desc(vq, i)) != vq->vring.num);
+	} while ((i = next_desc(desc, i, max)) != max);
 
-	vq->inflight++;
 	return head;
 }
 
@@ -719,44 +685,20 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len)
 	/* Make sure buffer is written before we update index. */
 	wmb();
 	vq->vring.used->idx++;
-	vq->inflight--;
-}
-
-/* This actually sends the interrupt for this virtqueue */
-static void trigger_irq(int fd, struct virtqueue *vq)
-{
-	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
-
-	/* If they don't want an interrupt, don't send one, unless empty. */
-	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
-	    && vq->inflight)
-		return;
-
-	/* Send the Guest an interrupt tell them we used something up. */
-	if (write(fd, buf, sizeof(buf)) != 0)
-		err(1, "Triggering irq %i", vq->config.irq);
+	vq->pending_used++;
 }
 
 /* And here's the combo meal deal.  Supersize me! */
-static void add_used_and_trigger(int fd, struct virtqueue *vq,
-				 unsigned int head, int len)
+static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 {
 	add_used(vq, head, len);
-	trigger_irq(fd, vq);
+	trigger_irq(vq);
 }
 
 /*
  * The Console
  *
- * Here is the input terminal setting we save, and the routine to restore them
- * on exit so the user gets their terminal back. */
-static struct termios orig_term;
-static void restore_term(void)
-{
-	tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
-}
-
-/* We associate some data with the console for our exit hack. */
+ * We associate some data with the console for our exit hack. */
 struct console_abort
 {
 	/* How many times have they hit ^C? */
@@ -766,276 +708,275 @@ struct console_abort
 };
 
 /* This is the routine which handles console input (ie. stdin). */
-static bool handle_console_input(int fd, struct device *dev)
+static void console_input(struct virtqueue *vq)
 {
 	int len;
 	unsigned int head, in_num, out_num;
-	struct iovec iov[dev->vq->vring.num];
-	struct console_abort *abort = dev->priv;
-
-	/* First we need a console buffer from the Guests's input virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-
-	/* If they're not ready for input, stop listening to this file
-	 * descriptor.  We'll start again once they add an input buffer. */
-	if (head == dev->vq->vring.num)
-		return false;
+	struct console_abort *abort = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
 
+	/* Make sure there's a descriptor waiting. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in console in queue?");
 
-	/* This is why we convert to iovecs: the readv() call uses them, and so
-	 * it reads straight into the Guest's buffer. */
-	len = readv(dev->fd, iov, in_num);
+	/* Read it in. */
+	len = readv(STDIN_FILENO, iov, in_num);
 	if (len <= 0) {
-		/* This implies that the console is closed, is /dev/null, or
-		 * something went terribly wrong. */
+		/* Ran out of input? */
 		warnx("Failed to get console input, ignoring console.");
-		/* Put the input terminal back. */
-		restore_term();
-		/* Remove callback from input vq, so it doesn't restart us. */
-		dev->vq->handle_output = NULL;
-		/* Stop listening to this fd: don't call us again. */
-		return false;
+		/* For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here. */
+		for (;;)
+			pause();
 	}
 
-	/* Tell the Guest about the new input. */
-	add_used_and_trigger(fd, dev->vq, head, len);
+	add_used_and_trigger(vq, head, len);
 
 	/* Three ^C within one second?  Exit.
 	 *
-	 * This is such a hack, but works surprisingly well.  Each ^C has to be
-	 * in a buffer by itself, so they can't be too fast.  But we check that
-	 * we get three within about a second, so they can't be too slow. */
-	if (len == 1 && ((char *)iov[0].iov_base)[0] == 3) {
-		if (!abort->count++)
-			gettimeofday(&abort->start, NULL);
-		else if (abort->count == 3) {
-			struct timeval now;
-			gettimeofday(&now, NULL);
-			if (now.tv_sec <= abort->start.tv_sec+1) {
-				unsigned long args[] = { LHREQ_BREAK, 0 };
-				/* Close the fd so Waker will know it has to
-				 * exit. */
-				close(waker_fds.pipe[1]);
-				/* Just in case Waker is blocked in BREAK, send
-				 * unbreak now. */
-				write(fd, args, sizeof(args));
-				exit(2);
-			}
-			abort->count = 0;
-		}
-	} else
-		/* Any other key resets the abort counter. */
+	 * This is such a hack, but works surprisingly well.  Each ^C has to
+	 * be in a buffer by itself, so they can't be too fast.  But we check
+	 * that we get three within about a second, so they can't be too
+	 * slow. */
+	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
 		abort->count = 0;
+		return;
+	}
 
-	/* Everything went OK! */
-	return true;
+	abort->count++;
+	if (abort->count == 1)
+		gettimeofday(&abort->start, NULL);
+	else if (abort->count == 3) {
+		struct timeval now;
+		gettimeofday(&now, NULL);
+		/* Kill all Launcher processes with SIGINT, like normal ^C */
+		if (now.tv_sec <= abort->start.tv_sec+1)
+			kill(0, SIGINT);
+		abort->count = 0;
+	}
 }
 
-/* Handling output for console is simple: we just get all the output buffers
- * and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
+/* This is the routine which handles console output (ie. stdout). */
+static void console_output(struct virtqueue *vq)
 {
 	unsigned int head, out, in;
-	int len;
 	struct iovec iov[vq->vring.num];
 
-	/* Keep getting output buffers from the Guest until we run out. */
-	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
-		if (in)
-			errx(1, "Input buffers in output queue?");
-		len = writev(STDOUT_FILENO, iov, out);
-		add_used_and_trigger(fd, vq, head, len);
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		errx(1, "Input buffers in console output queue?");
+	while (!iov_empty(iov, out)) {
+		int len = writev(STDOUT_FILENO, iov, out);
+		if (len <= 0)
+			err(1, "Write to stdout gave %i", len);
+		iov_consume(iov, out, len);
 	}
-}
-
-/* This is called when we no longer want to hear about Guest changes to a
- * virtqueue.  This is more efficient in high-traffic cases, but it means we
- * have to set a timer to check if any more changes have occurred. */
-static void block_vq(struct virtqueue *vq)
-{
-	struct itimerval itm;
-
-	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	vq->blocked = true;
-
-	itm.it_interval.tv_sec = 0;
-	itm.it_interval.tv_usec = 0;
-	itm.it_value.tv_sec = 0;
-	itm.it_value.tv_usec = timeout_usec;
-
-	setitimer(ITIMER_REAL, &itm, NULL);
+	add_used(vq, head, 0);
 }
 
 /*
  * The Network
  *
  * Handling output for network is also simple: we get all the output buffers
- * and write them (ignoring the first element) to this device's file descriptor
- * (/dev/net/tun).
+ * and write them to /dev/net/tun.
  */
-static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
+struct net_info {
+	int tunfd;
+};
+
+static void net_output(struct virtqueue *vq)
 {
-	unsigned int head, out, in, num = 0;
-	int len;
+	struct net_info *net_info = vq->dev->priv;
+	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
-	static int last_timeout_num;
-
-	/* Keep getting output buffers from the Guest until we run out. */
-	while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
-		if (in)
-			errx(1, "Input buffers in output queue?");
-		len = writev(vq->dev->fd, iov, out);
-		if (len < 0)
-			err(1, "Writing network packet to tun");
-		add_used_and_trigger(fd, vq, head, len);
-		num++;
-	}
 
-	/* Block further kicks and set up a timer if we saw anything. */
-	if (!timeout && num)
-		block_vq(vq);
-
-	/* We never quite know how long should we wait before we check the
-	 * queue again for more packets.  We start at 500 microseconds, and if
-	 * we get fewer packets than last time, we assume we made the timeout
-	 * too small and increase it by 10 microseconds.  Otherwise, we drop it
-	 * by one microsecond every time.  It seems to work well enough. */
-	if (timeout) {
-		if (num < last_timeout_num)
-			timeout_usec += 10;
-		else if (timeout_usec > 1)
-			timeout_usec--;
-		last_timeout_num = num;
-	}
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (in)
+		errx(1, "Input buffers in net output queue?");
+	if (writev(net_info->tunfd, iov, out) < 0)
+		errx(1, "Write to tun failed?");
+	add_used(vq, head, 0);
+}
+
+/* Will reading from this file descriptor block? */
+static bool will_block(int fd)
+{
+	fd_set fdset;
+	struct timeval zero = { 0, 0 };
+	FD_ZERO(&fdset);
+	FD_SET(fd, &fdset);
+	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
 }
 
-/* This is where we handle a packet coming in from the tun device to our
+/* This is where we handle packets coming in from the tun device to our
  * Guest. */
-static bool handle_tun_input(int fd, struct device *dev)
+static void net_input(struct virtqueue *vq)
 {
-	unsigned int head, in_num, out_num;
 	int len;
-	struct iovec iov[dev->vq->vring.num];
-
-	/* First we need a network buffer from the Guests's recv virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-	if (head == dev->vq->vring.num) {
-		/* Now, it's expected that if we try to send a packet too
-		 * early, the Guest won't be ready yet.  Wait until the device
-		 * status says it's ready. */
-		/* FIXME: Actually want DRIVER_ACTIVE here. */
-
-		/* Now tell it we want to know if new things appear. */
-		dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-		wmb();
-
-		/* We'll turn this back on if input buffers are registered. */
-		return false;
-	} else if (out_num)
-		errx(1, "Output buffers in network recv queue?");
-
-	/* Read the packet from the device directly into the Guest's buffer. */
-	len = readv(dev->fd, iov, in_num);
-	if (len <= 0)
-		err(1, "reading network");
+	unsigned int head, out, in;
+	struct iovec iov[vq->vring.num];
+	struct net_info *net_info = vq->dev->priv;
 
-	/* Tell the Guest about the new packet. */
-	add_used_and_trigger(fd, dev->vq, head, len);
+	head = wait_for_vq_desc(vq, iov, &out, &in);
+	if (out)
+		errx(1, "Output buffers in net input queue?");
 
-	verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
-		((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
-		head != dev->vq->vring.num ? "sent" : "discarded");
+	/* Deliver interrupt now, since we're about to sleep. */
+	if (vq->pending_used && will_block(net_info->tunfd))
+		trigger_irq(vq);
 
-	/* All good. */
-	return true;
+	len = readv(net_info->tunfd, iov, in);
+	if (len <= 0)
+		err(1, "Failed to read from tun.");
+	add_used(vq, head, len);
 }
 
-/*L:215 This is the callback attached to the network and console input
- * virtqueues: it ensures we try again, in case we stopped console or net
- * delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
+/* This is the helper to create threads. */
+static int do_thread(void *_vq)
 {
-	add_device_fd(vq->dev->fd);
-	/* Snap the Waker out of its select loop. */
-	write(waker_fds.pipe[1], "", 1);
+	struct virtqueue *vq = _vq;
+
+	for (;;)
+		vq->service(vq);
+	return 0;
 }
 
-static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+/* When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us! */
+static void kill_launcher(int signal)
 {
-	/* We don't need to know again when Guest refills receive buffer. */
-	vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	enable_fd(fd, vq, timeout);
+	kill(0, SIGTERM);
 }
 
-/* When the Guest tells us they updated the status field, we handle it. */
-static void update_device_status(struct device *dev)
+static void reset_device(struct device *dev)
 {
 	struct virtqueue *vq;
 
-	/* This is a reset. */
-	if (dev->desc->status == 0) {
-		verbose("Resetting device %s\n", dev->name);
+	verbose("Resetting device %s\n", dev->name);
 
-		/* Clear any features they've acked. */
-		memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
-		       dev->desc->feature_len);
+	/* Clear any features they've acked. */
+	memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
 
-		/* Zero out the virtqueues. */
-		for (vq = dev->vq; vq; vq = vq->next) {
-			memset(vq->vring.desc, 0,
-			       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
-			lg_last_avail(vq) = 0;
+	/* We're going to be explicitly killing threads, so ignore them. */
+	signal(SIGCHLD, SIG_IGN);
+
+	/* Zero out the virtqueues, get rid of their threads */
+	for (vq = dev->vq; vq; vq = vq->next) {
+		if (vq->thread != (pid_t)-1) {
+			kill(vq->thread, SIGTERM);
+			waitpid(vq->thread, NULL, 0);
+			vq->thread = (pid_t)-1;
 		}
-	} else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+		memset(vq->vring.desc, 0,
+		       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
+		lg_last_avail(vq) = 0;
+	}
+	dev->running = false;
+
+	/* Now we care if threads die. */
+	signal(SIGCHLD, (void *)kill_launcher);
+}
+
+static void create_thread(struct virtqueue *vq)
+{
+	/* Create stack for thread and run it.  Since stack grows
+	 * upwards, we point the stack pointer to the end of this
+	 * region. */
+	char *stack = malloc(32768);
+	unsigned long args[] = { LHREQ_EVENTFD,
+				 vq->config.pfn*getpagesize(), 0 };
+
+	/* Create a zero-initialized eventfd. */
+	vq->eventfd = eventfd(0, 0);
+	if (vq->eventfd < 0)
+		err(1, "Creating eventfd");
+	args[2] = vq->eventfd;
+
+	/* Attach an eventfd to this virtqueue: it will go off
+	 * when the Guest does an LHCALL_NOTIFY for this vq. */
+	if (write(lguest_fd, &args, sizeof(args)) != 0)
+		err(1, "Attaching eventfd");
+
+	/* CLONE_VM: because it has to access the Guest memory, and
+	 * SIGCHLD so we get a signal if it dies. */
+	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
+	if (vq->thread == (pid_t)-1)
+		err(1, "Creating clone");
+	/* We close our local copy, now the child has it. */
+	close(vq->eventfd);
+}
+
+static void start_device(struct device *dev)
+{
+	unsigned int i;
+	struct virtqueue *vq;
+
+	verbose("Device %s OK: offered", dev->name);
+	for (i = 0; i < dev->feature_len; i++)
+		verbose(" %02x", get_feature_bits(dev)[i]);
+	verbose(", accepted");
+	for (i = 0; i < dev->feature_len; i++)
+		verbose(" %02x", get_feature_bits(dev)
+			[dev->feature_len+i]);
+
+	for (vq = dev->vq; vq; vq = vq->next) {
+		if (vq->service)
+			create_thread(vq);
+	}
+	dev->running = true;
+}
+
+static void cleanup_devices(void)
+{
+	struct device *dev;
+
+	for (dev = devices.dev; dev; dev = dev->next)
+		reset_device(dev);
+
+	/* If we saved off the original terminal settings, restore them now. */
+	if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
+		tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
+}
+
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
+{
+	/* A zero status is a reset, otherwise it's a set of flags. */
+	if (dev->desc->status == 0)
+		reset_device(dev);
+	else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
 		warnx("Device %s configuration FAILED", dev->name);
+		if (dev->running)
+			reset_device(dev);
 	} else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
-		unsigned int i;
-
-		verbose("Device %s OK: offered", dev->name);
-		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %02x", get_feature_bits(dev)[i]);
-		verbose(", accepted");
-		for (i = 0; i < dev->desc->feature_len; i++)
-			verbose(" %02x", get_feature_bits(dev)
-				[dev->desc->feature_len+i]);
-
-		if (dev->ready)
-			dev->ready(dev);
+		if (!dev->running)
+			start_device(dev);
 	}
 }
 
 /* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
-static void handle_output(int fd, unsigned long addr)
+static void handle_output(unsigned long addr)
 {
 	struct device *i;
-	struct virtqueue *vq;
 
-	/* Check each device and virtqueue. */
+	/* Check each device. */
 	for (i = devices.dev; i; i = i->next) {
+		struct virtqueue *vq;
+
 		/* Notifications to device descriptors update device status. */
 		if (from_guest_phys(addr) == i->desc) {
 			update_device_status(i);
 			return;
 		}
 
-		/* Notifications to virtqueues mean output has occurred. */
+		/* Devices *can* be used before status is set to DRIVER_OK. */
 		for (vq = i->vq; vq; vq = vq->next) {
-			if (vq->config.pfn != addr/getpagesize())
+			if (addr != vq->config.pfn*getpagesize())
 				continue;
-
-			/* Guest should acknowledge (and set features!)  before
-			 * using the device. */
-			if (i->desc->status == 0) {
-				warnx("%s gave early output", i->name);
-				return;
-			}
-
-			if (strcmp(vq->dev->name, "console") != 0)
-				verbose("Output to %s\n", vq->dev->name);
-			if (vq->handle_output)
-				vq->handle_output(fd, vq, false);
+			if (i->running)
+				errx(1, "Notification on running %s", i->name);
+			start_device(i);
 			return;
 		}
 	}
@@ -1049,71 +990,6 @@ static void handle_output(int fd, unsigned long addr)
 	      strnlen(from_guest_phys(addr), guest_limit - addr));
 }
 
-static void handle_timeout(int fd)
-{
-	char buf[32];
-	struct device *i;
-	struct virtqueue *vq;
-
-	/* Clear the pipe */
-	read(timeoutpipe[0], buf, sizeof(buf));
-
-	/* Check each device and virtqueue: flush blocked ones. */
-	for (i = devices.dev; i; i = i->next) {
-		for (vq = i->vq; vq; vq = vq->next) {
-			if (!vq->blocked)
-				continue;
-
-			vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-			vq->blocked = false;
-			if (vq->handle_output)
-				vq->handle_output(fd, vq, true);
-		}
-	}
-}
-
-/* This is called when the Waker wakes us up: check for incoming file
- * descriptors. */
-static void handle_input(int fd)
-{
-	/* select() wants a zeroed timeval to mean "don't wait". */
-	struct timeval poll = { .tv_sec = 0, .tv_usec = 0 };
-
-	for (;;) {
-		struct device *i;
-		fd_set fds = devices.infds;
-		int num;
-
-		num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
-		/* Could get interrupted */
-		if (num < 0)
-			continue;
-		/* If nothing is ready, we're done. */
-		if (num == 0)
-			break;
-
-		/* Otherwise, call the device(s) which have readable file
-		 * descriptors and a method of handling them.  */
-		for (i = devices.dev; i; i = i->next) {
-			if (i->handle_input && FD_ISSET(i->fd, &fds)) {
-				if (i->handle_input(fd, i))
-					continue;
-
-				/* If handle_input() returns false, it means we
-				 * should no longer service it.  Networking and
-				 * console do this when there's no input
-				 * buffers to deliver into.  Console also uses
-				 * it when it discovers that stdin is closed. */
-				FD_CLR(i->fd, &devices.infds);
-			}
-		}
-
-		/* Is this the timeout fd? */
-		if (FD_ISSET(timeoutpipe[0], &fds))
-			handle_timeout(fd);
-	}
-}
-
 /*L:190
  * Device Setup
  *
@@ -1129,8 +1005,8 @@ static void handle_input(int fd)
 static u8 *device_config(const struct device *dev)
 {
 	return (void *)(dev->desc + 1)
-		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig)
-		+ dev->desc->feature_len * 2;
+		+ dev->num_vq * sizeof(struct lguest_vqconfig)
+		+ dev->feature_len * 2;
 }
 
 /* This routine allocates a new "struct lguest_device_desc" from descriptor
@@ -1159,7 +1035,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 /* Each device descriptor is followed by the description of its virtqueues.  We
  * specify how many descriptors the virtqueue is to have. */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
-			  void (*handle_output)(int, struct virtqueue *, bool))
+			  void (*service)(struct virtqueue *))
 {
 	unsigned int pages;
 	struct virtqueue **i, *vq = malloc(sizeof(*vq));
@@ -1174,8 +1050,8 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
-	vq->inflight = 0;
-	vq->blocked = false;
+	vq->service = service;
+	vq->thread = (pid_t)-1;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1191,6 +1067,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	 * yet, otherwise we'd be overwriting them. */
 	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
 	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+	dev->num_vq++;
 	dev->desc->num_vq++;
 
 	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
@@ -1199,15 +1076,6 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	 * second.  */
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
-
-	/* Set the routine to call when the Guest does something to this
-	 * virtqueue. */
-	vq->handle_output = handle_output;
-
-	/* As an optimization, set the advisory "Don't Notify Me" flag if we
-	 * don't have a handler */
-	if (!handle_output)
-		vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
 }
 
 /* The first half of the feature bitmask is for us to advertise features.  The
@@ -1219,7 +1087,7 @@ static void add_feature(struct device *dev, unsigned bit)
 	/* We can't extend the feature bits once we've added config bytes */
 	if (dev->desc->feature_len <= bit / CHAR_BIT) {
 		assert(dev->desc->config_len == 0);
-		dev->desc->feature_len = (bit / CHAR_BIT) + 1;
+		dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
 	}
 
 	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
@@ -1243,22 +1111,17 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
  * calling new_dev_desc() to allocate the descriptor and device memory.
  *
  * See what I mean about userspace being boring? */
-static struct device *new_device(const char *name, u16 type, int fd,
-				 bool (*handle_input)(int, struct device *))
+static struct device *new_device(const char *name, u16 type)
 {
 	struct device *dev = malloc(sizeof(*dev));
 
 	/* Now we populate the fields one at a time. */
-	dev->fd = fd;
-	/* If we have an input handler for this file descriptor, then we add it
-	 * to the device_list's fdset and maxfd. */
-	if (handle_input)
-		add_device_fd(dev->fd);
 	dev->desc = new_dev_desc(type);
-	dev->handle_input = handle_input;
 	dev->name = name;
 	dev->vq = NULL;
-	dev->ready = NULL;
+	dev->feature_len = 0;
+	dev->num_vq = 0;
+	dev->running = false;
 
 	/* Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
@@ -1286,13 +1149,10 @@ static void setup_console(void)
 		 * raw input stream to the Guest. */
 		term.c_lflag &= ~(ISIG|ICANON|ECHO);
 		tcsetattr(STDIN_FILENO, TCSANOW, &term);
-		/* If we exit gracefully, the original settings will be
-		 * restored so the user can see what they're typing. */
-		atexit(restore_term);
 	}
 
-	dev = new_device("console", VIRTIO_ID_CONSOLE,
-			 STDIN_FILENO, handle_console_input);
+	dev = new_device("console", VIRTIO_ID_CONSOLE);
+
 	/* We store the console state in dev->priv, and initialize it. */
 	dev->priv = malloc(sizeof(struct console_abort));
 	((struct console_abort *)dev->priv)->count = 0;
@@ -1301,31 +1161,13 @@ static void setup_console(void)
 	 * they put something the input queue, we make sure we're listening to
 	 * stdin.  When they put something in the output queue, we write it to
 	 * stdout. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_console_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
+	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
-	verbose("device %u: console\n", devices.device_num++);
+	verbose("device %u: console\n", ++devices.device_num);
 }
 /*:*/
 
-static void timeout_alarm(int sig)
-{
-	write(timeoutpipe[1], "", 1);
-}
-
-static void setup_timeout(void)
-{
-	if (pipe(timeoutpipe) != 0)
-		err(1, "Creating timeout pipe");
-
-	if (fcntl(timeoutpipe[1], F_SETFL,
-		  fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
-		err(1, "Making timeout pipe nonblocking");
-
-	add_device_fd(timeoutpipe[0]);
-	signal(SIGALRM, timeout_alarm);
-}
-
 /*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
@@ -1447,21 +1289,23 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 static void setup_tun_net(char *arg)
 {
 	struct device *dev;
-	int netfd, ipfd;
+	struct net_info *net_info = malloc(sizeof(*net_info));
+	int ipfd;
 	u32 ip = INADDR_ANY;
 	bool bridging = false;
 	char tapif[IFNAMSIZ], *p;
 	struct virtio_net_config conf;
 
-	netfd = get_tun_device(tapif);
+	net_info->tunfd = get_tun_device(tapif);
 
 	/* First we create a new network device. */
-	dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
+	dev = new_device("net", VIRTIO_ID_NET);
+	dev->priv = net_info;
 
 	/* Network devices need a receive and a send queue, just like
 	 * console. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
+	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
 	/* We need a socket to perform the magic network ioctls to bring up the
 	 * tap interface, connect to the bridge etc.  Any socket will do! */
@@ -1502,6 +1346,8 @@ static void setup_tun_net(char *arg)
 	add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
 	add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
 	add_feature(dev, VIRTIO_NET_F_HOST_ECN);
+	/* We handle indirect ring entries */
+	add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */
@@ -1550,20 +1396,18 @@ struct vblk_info
  * Remember that the block device is handled by a separate I/O thread.  We head
  * straight into the core of that thread here:
  */
-static bool service_io(struct device *dev)
+static void blk_request(struct virtqueue *vq)
 {
-	struct vblk_info *vblk = dev->priv;
+	struct vblk_info *vblk = vq->dev->priv;
 	unsigned int head, out_num, in_num, wlen;
 	int ret;
 	u8 *in;
 	struct virtio_blk_outhdr *out;
-	struct iovec iov[dev->vq->vring.num];
+	struct iovec iov[vq->vring.num];
 	off64_t off;
 
-	/* See if there's a request waiting.  If not, nothing to do. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-	if (head == dev->vq->vring.num)
-		return false;
+	/* Get the next request. */
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
 	/* Every block request should contain at least one output buffer
 	 * (detailing the location on disk and the type of request) and one
@@ -1637,83 +1481,21 @@ static bool service_io(struct device *dev)
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
-	/* We can't trigger an IRQ, because we're not the Launcher.  It does
-	 * that when we tell it we're done. */
-	add_used(dev->vq, head, wlen);
-	return true;
-}
-
-/* This is the thread which actually services the I/O. */
-static int io_thread(void *_dev)
-{
-	struct device *dev = _dev;
-	struct vblk_info *vblk = dev->priv;
-	char c;
-
-	/* Close other side of workpipe so we get 0 read when main dies. */
-	close(vblk->workpipe[1]);
-	/* Close the other side of the done_fd pipe. */
-	close(dev->fd);
-
-	/* When this read fails, it means Launcher died, so we follow. */
-	while (read(vblk->workpipe[0], &c, 1) == 1) {
-		/* We acknowledge each request immediately to reduce latency,
-		 * rather than waiting until we've done them all.  I haven't
-		 * measured to see if it makes any difference.
-		 *
-		 * That would be an interesting test, wouldn't it?  You could
-		 * also try having more than one I/O thread. */
-		while (service_io(dev))
-			write(vblk->done_fd, &c, 1);
-	}
-	return 0;
-}
-
-/* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when that thread tells us it's completed some I/O. */
-static bool handle_io_finish(int fd, struct device *dev)
-{
-	char c;
-
-	/* If the I/O thread died, presumably it printed the error, so we
-	 * simply exit. */
-	if (read(dev->fd, &c, 1) != 1)
-		exit(1);
-
-	/* It did some work, so trigger the irq. */
-	trigger_irq(fd, dev->vq);
-	return true;
-}
-
-/* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
-{
-	struct vblk_info *vblk = vq->dev->priv;
-	char c = 0;
-
-	/* Wake up I/O thread and tell it to go to work! */
-	if (write(vblk->workpipe[1], &c, 1) != 1)
-		/* Presumably it indicated why it died. */
-		exit(1);
+	add_used(vq, head, wlen);
 }
 
 /*L:198 This actually sets up a virtual block device. */
 static void setup_block_file(const char *filename)
 {
-	int p[2];
 	struct device *dev;
 	struct vblk_info *vblk;
-	void *stack;
 	struct virtio_blk_config conf;
 
-	/* This is the pipe the I/O thread will use to tell us I/O is done. */
-	pipe(p);
-
 	/* The device responds to return from I/O thread. */
-	dev = new_device("block", VIRTIO_ID_BLOCK, p[0], handle_io_finish);
+	dev = new_device("block", VIRTIO_ID_BLOCK);
 
 	/* The device has one virtqueue, where the Guest places requests. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, handle_virtblk_output);
+	add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
 
 	/* Allocate the room for our own bookkeeping */
 	vblk = dev->priv = malloc(sizeof(*vblk));
@@ -1735,49 +1517,29 @@ static void setup_block_file(const char *filename)
 
 	set_config(dev, sizeof(conf), &conf);
 
-	/* The I/O thread writes to this end of the pipe when done. */
-	vblk->done_fd = p[1];
-
-	/* This is the second pipe, which is how we tell the I/O thread about
-	 * more work. */
-	pipe(vblk->workpipe);
-
-	/* Create stack for thread and run it.  Since stack grows upwards, we
-	 * point the stack pointer to the end of this region. */
-	stack = malloc(32768);
-	/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
-	 * becoming a zombie. */
-	if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
-		err(1, "Creating clone");
-
-	/* We don't need to keep the I/O thread's end of the pipes open. */
-	close(vblk->done_fd);
-	close(vblk->workpipe[0]);
-
 	verbose("device %u: virtblock %llu sectors\n",
-		devices.device_num, le64_to_cpu(conf.capacity));
+		++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
+struct rng_info {
+	int rfd;
+};
+
 /* Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
  * The same logic applies, however. */
-static bool handle_rng_input(int fd, struct device *dev)
+static void rng_input(struct virtqueue *vq)
 {
 	int len;
 	unsigned int head, in_num, out_num, totlen = 0;
-	struct iovec iov[dev->vq->vring.num];
+	struct rng_info *rng_info = vq->dev->priv;
+	struct iovec iov[vq->vring.num];
 
 	/* First we need a buffer from the Guests's virtqueue. */
-	head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
-
-	/* If they're not ready for input, stop listening to this file
-	 * descriptor.  We'll start again once they add an input buffer. */
-	if (head == dev->vq->vring.num)
-		return false;
-
+	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in rng?");
 
@@ -1785,7 +1547,7 @@ static bool handle_rng_input(int fd, struct device *dev)
 	 * it reads straight into the Guest's buffer.  We loop to make sure we
 	 * fill it. */
 	while (!iov_empty(iov, in_num)) {
-		len = readv(dev->fd, iov, in_num);
+		len = readv(rng_info->rfd, iov, in_num);
 		if (len <= 0)
 			err(1, "Read from /dev/random gave %i", len);
 		iov_consume(iov, in_num, len);
@@ -1793,25 +1555,23 @@ static bool handle_rng_input(int fd, struct device *dev)
 	}
 
 	/* Tell the Guest about the new input. */
-	add_used_and_trigger(fd, dev->vq, head, totlen);
-
-	/* Everything went OK! */
-	return true;
+	add_used(vq, head, totlen);
 }
 
 /* And this creates a "hardware" random number device for the Guest. */
 static void setup_rng(void)
 {
 	struct device *dev;
-	int fd;
+	struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
-	fd = open_or_die("/dev/random", O_RDONLY);
+	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
 	/* The device responds to return from I/O thread. */
-	dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
+	dev = new_device("rng", VIRTIO_ID_RNG);
+	dev->priv = rng_info;
 
 	/* The device has one virtqueue, where the Guest places inbufs. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
+	add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
 
 	verbose("device %u: rng\n", devices.device_num++);
 }
@@ -1827,17 +1587,18 @@ static void __attribute__((noreturn)) restart_guest(void)
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
 
-	/* The exec automatically gets rid of the I/O and Waker threads. */
+	/* Reset all the devices (kills all threads). */
+	cleanup_devices();
+
 	execv(main_args[0], main_args);
 	err(1, "Could not exec %s", main_args[0]);
 }
 
 /*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
  * its input and output, and finally, lays it to rest. */
-static void __attribute__((noreturn)) run_guest(int lguest_fd)
+static void __attribute__((noreturn)) run_guest(void)
 {
 	for (;;) {
-		unsigned long args[] = { LHREQ_BREAK, 0 };
 		unsigned long notify_addr;
 		int readval;
 
@@ -1848,8 +1609,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
 		/* One unsigned long means the Guest did HCALL_NOTIFY */
 		if (readval == sizeof(notify_addr)) {
 			verbose("Notify on address %#lx\n", notify_addr);
-			handle_output(lguest_fd, notify_addr);
-			continue;
+			handle_output(notify_addr);
 		/* ENOENT means the Guest died.  Reading tells us why. */
 		} else if (errno == ENOENT) {
 			char reason[1024] = { 0 };
@@ -1858,19 +1618,9 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
 		/* ERESTART means that we need to reboot the guest */
 		} else if (errno == ERESTART) {
 			restart_guest();
-		/* EAGAIN means a signal (timeout).
-		 * Anything else means a bug or incompatible change. */
-		} else if (errno != EAGAIN)
+		/* Anything else means a bug or incompatible change. */
+		} else
 			err(1, "Running guest failed");
-
-		/* Only service input on thread for CPU 0. */
-		if (cpu_id != 0)
-			continue;
-
-		/* Service input, then unset the BREAK to release the Waker. */
-		handle_input(lguest_fd);
-		if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
-			err(1, "Resetting break");
 	}
 }
 /*L:240
@@ -1904,8 +1654,8 @@ int main(int argc, char *argv[])
 	/* Memory, top-level pagetable, code startpoint and size of the
 	 * (optional) initrd. */
 	unsigned long mem = 0, start, initrd_size = 0;
-	/* Two temporaries and the /dev/lguest file descriptor. */
-	int i, c, lguest_fd;
+	/* Two temporaries. */
+	int i, c;
 	/* The boot information for the Guest. */
 	struct boot_params *boot;
 	/* If they specify an initrd file to load. */
@@ -1913,18 +1663,10 @@ int main(int argc, char *argv[])
 
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
-	/* We don't "wait" for the children, so prevent them from becoming
-	 * zombies. */
-	signal(SIGCHLD, SIG_IGN);
 
-	/* First we initialize the device list.  Since console and network
-	 * device receive input from a file descriptor, we keep an fdset
-	 * (infds) and the maximum fd number (max_infd) with the head of the
-	 * list.  We also keep a pointer to the last device.  Finally, we keep
-	 * the next interrupt number to use for devices (1: remember that 0 is
-	 * used by the timer). */
-	FD_ZERO(&devices.infds);
-	devices.max_infd = -1;
+	/* First we initialize the device list.  We keep a pointer to the last
+	 * device, and the next interrupt number to use for devices (1:
+	 * remember that 0 is used by the timer). */
 	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
@@ -1982,9 +1724,6 @@ int main(int argc, char *argv[])
 	/* We always have a console device */
 	setup_console();
 
-	/* We can timeout waiting for Guest network transmit. */
-	setup_timeout();
-
 	/* Now we load the kernel */
 	start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
 
@@ -2023,15 +1762,16 @@ int main(int argc, char *argv[])
 
 	/* We tell the kernel to initialize the Guest: this returns the open
 	 * /dev/lguest file descriptor. */
-	lguest_fd = tell_kernel(start);
+	tell_kernel(start);
+
+	/* Ensure that we terminate if a child dies. */
+	signal(SIGCHLD, kill_launcher);
 
-	/* We clone off a thread, which wakes the Launcher whenever one of the
-	 * input file descriptors needs attention.  We call this the Waker, and
-	 * we'll cover it in a moment. */
-	setup_waker(lguest_fd);
+	/* If we exit via err(), this kills all the threads, restores tty. */
+	atexit(cleanup_devices);
 
 	/* Finally, run the Guest.  This doesn't return. */
-	run_guest(lguest_fd);
+	run_guest();
 }
 /*:*/
 
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 28c747362f9..efb3a6a045a 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -37,7 +37,6 @@ Running Lguest:
      "Paravirtualized guest support" = Y
         "Lguest guest support" = Y
      "High Memory Support" = off/4GB
-     "PAE (Physical Address Extension) Support" = N
      "Alignment value to which kernel should be aligned" = 0x100000
         (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
          CONFIG_PHYSICAL_ALIGN=0x100000)
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 23045b8b50f..300da4bdfdb 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -34,7 +34,7 @@ out of order wrt other memory writes by the owner CPU.
 
 It can be done by slightly modifying the standard atomic operations : only
 their UP variant must be kept. It typically means removing LOCK prefix (on
-i386 and x86_64) and any SMP sychronization barrier. If the architecture does
+i386 and x86_64) and any SMP synchronization barrier. If the architecture does
 not have a different behavior between SMP and UP, including asm-generic/local.h
 in your architecture's local.h is sufficient.
 
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index f5b7127f54a..7f5809eddee 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -31,6 +31,7 @@ Contents:
 
      - Locking functions.
      - Interrupt disabling functions.
+     - Sleep and wake-up functions.
      - Miscellaneous functions.
 
  (*) Inter-CPU locking barrier effects.
@@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some
 other means.
 
 
+SLEEP AND WAKE-UP FUNCTIONS
+---------------------------
+
+Sleeping and waking on an event flagged in global data can be viewed as an
+interaction between two pieces of data: the task state of the task waiting for
+the event and the global data used to indicate the event.  To make sure that
+these appear to happen in the right order, the primitives to begin the process
+of going to sleep, and the primitives to initiate a wake up imply certain
+barriers.
+
+Firstly, the sleeper normally follows something like this sequence of events:
+
+	for (;;) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		if (event_indicated)
+			break;
+		schedule();
+	}
+
+A general memory barrier is interpolated automatically by set_current_state()
+after it has altered the task state:
+
+	CPU 1
+	===============================
+	set_current_state();
+	  set_mb();
+	    STORE current->state
+	    <general barrier>
+	LOAD event_indicated
+
+set_current_state() may be wrapped by:
+
+	prepare_to_wait();
+	prepare_to_wait_exclusive();
+
+which therefore also imply a general memory barrier after setting the state.
+The whole sequence above is available in various canned forms, all of which
+interpolate the memory barrier in the right place:
+
+	wait_event();
+	wait_event_interruptible();
+	wait_event_interruptible_exclusive();
+	wait_event_interruptible_timeout();
+	wait_event_killable();
+	wait_event_timeout();
+	wait_on_bit();
+	wait_on_bit_lock();
+
+
+Secondly, code that performs a wake up normally follows something like this:
+
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+or:
+
+	event_indicated = 1;
+	wake_up_process(event_daemon);
+
+A write memory barrier is implied by wake_up() and co. if and only if they wake
+something up.  The barrier occurs before the task state is cleared, and so sits
+between the STORE to indicate the event and the STORE to set TASK_RUNNING:
+
+	CPU 1				CPU 2
+	===============================	===============================
+	set_current_state();		STORE event_indicated
+	  set_mb();			wake_up();
+	    STORE current->state	  <write barrier>
+	    <general barrier>		  STORE current->state
+	LOAD event_indicated
+
+The available waker functions include:
+
+	complete();
+	wake_up();
+	wake_up_all();
+	wake_up_bit();
+	wake_up_interruptible();
+	wake_up_interruptible_all();
+	wake_up_interruptible_nr();
+	wake_up_interruptible_poll();
+	wake_up_interruptible_sync();
+	wake_up_interruptible_sync_poll();
+	wake_up_locked();
+	wake_up_locked_poll();
+	wake_up_nr();
+	wake_up_poll();
+	wake_up_process();
+
+
+[!] Note that the memory barriers implied by the sleeper and the waker do _not_
+order multiple stores before the wake-up with respect to loads of those stored
+values after the sleeper has called set_current_state().  For instance, if the
+sleeper does:
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	if (event_indicated)
+		break;
+	__set_current_state(TASK_RUNNING);
+	do_something(my_data);
+
+and the waker does:
+
+	my_data = value;
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+there's no guarantee that the change to event_indicated will be perceived by
+the sleeper as coming after the change to my_data.  In such a circumstance, the
+code on both sides must interpolate its own memory barriers between the
+separate data accesses.  Thus the above sleeper ought to do:
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	if (event_indicated) {
+		smp_rmb();
+		do_something(my_data);
+	}
+
+and the waker should do:
+
+	my_data = value;
+	smp_wmb();
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+
 MISCELLANEOUS FUNCTIONS
 -----------------------
 
@@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED?
 
 Under normal operation, memory operation reordering is generally not going to
 be a problem as a single-threaded linear piece of code will still appear to
-work correctly, even if it's in an SMP kernel.  There are, however, three
+work correctly, even if it's in an SMP kernel.  There are, however, four
 circumstances in which reordering definitely _could_ be a problem:
 
  (*) Interprocessor interaction.
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 4c2ecf537a4..bbc8a6a3692 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -73,13 +73,13 @@ this phase is triggered automatically. ACPI can notify this event. If not,
 (see Section 4.).
 
 Logical Memory Hotplug phase is to change memory state into
-avaiable/unavailable for users. Amount of memory from user's view is
+available/unavailable for users. Amount of memory from user's view is
 changed by this phase. The kernel makes all memory in it as free pages
 when a memory range is available.
 
 In this document, this phase is described as online/offline.
 
-Logical Memory Hotplug phase is triggred by write of sysfs file by system
+Logical Memory Hotplug phase is triggered by write of sysfs file by system
 administrator. For the hot-add case, it must be executed after Physical Hotplug
 phase by hand.
 (However, if you writes udev's hotplug scripts for memory hotplug, these
@@ -334,7 +334,7 @@ MEMORY_CANCEL_ONLINE
   Generated if MEMORY_GOING_ONLINE fails.
 
 MEMORY_ONLINE
-  Generated when memory has succesfully brought online. The callback may
+  Generated when memory has successfully brought online. The callback may
   allocate pages from the new memory.
 
 MEMORY_GOING_OFFLINE
@@ -359,7 +359,7 @@ The third argument is passed by pointer of struct memory_notify.
 struct memory_notify {
        unsigned long start_pfn;
        unsigned long nr_pages;
-       int status_cahnge_nid;
+       int status_change_nid;
 }
 
 start_pfn is start_pfn of online/offline memory.
diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
index 1fef1f06dfd..d3507bad428 100644
--- a/Documentation/mn10300/ABI.txt
+++ b/Documentation/mn10300/ABI.txt
@@ -26,7 +26,7 @@ registers and the stack. If the first argument is a 64-bit value, it will be
 passed in D0:D1. If the first argument is not a 64-bit value, but the second
 is, the second will be passed entirely on the stack and D1 will be unused.
 
-Arguments smaller than 32-bits are not coelesced within a register or a stack
+Arguments smaller than 32-bits are not coalesced within a register or a stack
 word. For example, two byte-sized arguments will always be passed in separate
 registers or word-sized stack slots.
 
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt
index bdf93b7f0f2..274821b35a7 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.txt
@@ -50,7 +50,7 @@ byte 255:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp5 ... rp15
            cp5  cp5  cp5  cp5  cp4  cp4  cp4  cp4
 
 This figure represents a sector of 256 bytes.
-cp is my abbreviaton for column parity, rp for row parity.
+cp is my abbreviation for column parity, rp for row parity.
 
 Let's start to explain column parity.
 cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
@@ -560,7 +560,7 @@ Measuring this code again showed big gain. When executing the original
 linux code 1 million times, this took about 1 second on my system.
 (using time to measure the performance). After this iteration I was back
 to 0.075 sec. Actually I had to decide to start measuring over 10
-million interations in order not to loose too much accuracy. This one
+million iterations in order not to lose too much accuracy. This one
 definitely seemed to be the jackpot!
 
 There is a little bit more room for improvement though. There are three
@@ -571,8 +571,8 @@ loop; This eliminates 3 statements per loop. Of course after the loop we
 need to correct by adding:
     rp4 ^= rp4_6;
     rp6 ^= rp4_6
-Furthermore there are 4 sequential assingments to rp8. This can be
-encoded slightly more efficient by saving tmppar before those 4 lines
+Furthermore there are 4 sequential assignments to rp8. This can be
+encoded slightly more efficiently by saving tmppar before those 4 lines
 and later do rp8 = rp8 ^ tmppar ^ notrp8;
 (where notrp8 is the value of rp8 before those 4 lines).
 Again a use of the commutative property of xor.
@@ -622,7 +622,7 @@ Not a big change, but every penny counts :-)
 Analysis 7
 ==========
 
-Acutally this made things worse. Not very much, but I don't want to move
+Actually this made things worse. Not very much, but I don't want to move
 into the wrong direction. Maybe something to investigate later. Could
 have to do with caching again.
 
@@ -642,7 +642,7 @@ Analysis 8
 This makes things worse. Let's stick with attempt 6 and continue from there.
 Although it seems that the code within the loop cannot be optimised
 further there is still room to optimize the generation of the ecc codes.
-We can simply calcualate the total parity. If this is 0 then rp4 = rp5
+We can simply calculate the total parity. If this is 0 then rp4 = rp5
 etc. If the parity is 1, then rp4 = !rp5;
 But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
 in the result byte and then do something like
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 08762750f12..d5181ce9ff6 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -221,7 +221,7 @@ ad_select
 
 		- Any slave's 802.3ad association state changes
 
-		- The bond's adminstrative state changes to up
+		- The bond's administrative state changes to up
 
 	count or 2
 
@@ -369,7 +369,7 @@ fail_over_mac
 		When this policy is used in conjuction with the mii
 		monitor, devices which assert link up prior to being
 		able to actually transmit and receive are particularly
-		susecptible to loss of the gratuitous ARP, and an
+		susceptible to loss of the gratuitous ARP, and an
 		appropriate updelay setting may be required.
 
 	follow or 2
@@ -1794,7 +1794,7 @@ target to query.
 generally referred to as "trunk failover."  This is a feature of the
 switch that causes the link state of a particular switch port to be set
 down (or up) when the state of another switch port goes down (or up).
-It's purpose is to propogate link failures from logically "exterior" ports
+Its purpose is to propagate link failures from logically "exterior" ports
 to the logically "interior" ports that bonding is able to monitor via
 miimon.  Availability and configuration for trunk failover varies by
 switch, but this can be a viable alternative to the ARP monitor when using
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 2035bc4932f..463d9e029ef 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -327,7 +327,7 @@ solution for a couple of reasons:
             return 1;
     }
 
-    /* paraniod check ... */
+    /* paranoid check ... */
     if (nbytes < sizeof(struct can_frame)) {
             fprintf(stderr, "read: incomplete CAN frame\n");
             return 1;
diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/dm9000.txt
index 65df3dea556..5552e2e575c 100644
--- a/Documentation/networking/dm9000.txt
+++ b/Documentation/networking/dm9000.txt
@@ -129,7 +129,7 @@ PHY Link state polling
 ----------------------
 
 The driver keeps track of the link state and informs the network core
-about link (carrier) availablilty. This is managed by several methods
+about link (carrier) availability. This is managed by several methods
 depending on the version of the chip and on which PHY is being used.
 
 For the internal PHY, the original (and currently default) method is
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ec5de02f543..b121c5db707 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
-UNDOCUMENTED:
 
 /proc/sys/net/core/*
-	dev_weight FIXME
+dev_weight - INTEGER
+	The maximum number of packets that kernel can handle on a NAPI
+	interrupt, it's a Per-CPU variable.
+
+	Default: 64
 
 /proc/sys/net/unix/*
-	max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+	The maximum length of dgram socket receive queue
+
+	Default: 10
+
+
+UNDOCUMENTED:
 
 /proc/sys/net/irda/*
 	fast_poll_increase FIXME
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
index 2451f551c50..63214b280e0 100644
--- a/Documentation/networking/l2tp.txt
+++ b/Documentation/networking/l2tp.txt
@@ -158,7 +158,7 @@ Sample Userspace Code
         }
         return 0;
 
-Miscellanous
+Miscellaneous
 ============
 
 The PPPoL2TP driver was developed as part of the OpenL2TP project by
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index a2ab6a0b116..87b3d15f523 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -74,7 +74,7 @@ dev->hard_start_xmit:
 	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
 	set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
-	Dont use it for new drivers.
+	Don't use it for new drivers.
 
 	Context: Process with BHs disabled or BH (timer),
 	         will be called with interrupts disabled by netconsole.
diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 6a07e45d4a9..6e8ce09f9c7 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -36,7 +36,7 @@ Phonet packets have a common header as follows:
 On Linux, the link-layer header includes the pn_media byte (see below).
 The next 7 bytes are part of the network-layer header.
 
-The device ID is split: the 6 higher-order bits consitute the device
+The device ID is split: the 6 higher-order bits constitute the device
 address, while the 2 lower-order bits are used for multiplexing, as are
 the 8-bit object identifiers. As such, Phonet can be considered as a
 network layer with 6 bits of address space and 10 bits for transport
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index dcf31648414..eaa1a25946c 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -89,7 +89,7 @@ added to this document when its support is enabled.
 Device drivers who provide their own built regulatory domain
 do not need a callback as the channels registered by them are
 the only ones that will be allowed and therefore *additional*
-cannels cannot be enabled.
+channels cannot be enabled.
 
 Example code - drivers hinting an alpha2:
 ------------------------------------------
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 421e7d00ffd..c9abbd86bc1 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -75,9 +75,6 @@ may need to apply in domain-specific ways to their devices:
 struct bus_type {
 	...
 	int  (*suspend)(struct device *dev, pm_message_t state);
-	int  (*suspend_late)(struct device *dev, pm_message_t state);
-
-	int  (*resume_early)(struct device *dev);
 	int  (*resume)(struct device *dev);
 };
 
@@ -226,20 +223,7 @@ The phases are seen by driver notifications issued in this order:
 
 	This call should handle parts of device suspend logic that require
 	sleeping.  It probably does work to quiesce the device which hasn't
-	been abstracted into class.suspend() or bus.suspend_late().
-
-   3	bus.suspend_late(dev, message) is called with IRQs disabled, and
-	with only one CPU active.  Until the bus.resume_early() phase
-	completes (see later), IRQs are not enabled again.  This method
-	won't be exposed by all busses; for message based busses like USB,
-	I2C, or SPI, device interactions normally require IRQs.  This bus
-	call may be morphed into a driver call with bus-specific parameters.
-
-	This call might save low level hardware state that might otherwise
-	be lost in the upcoming low power state, and actually put the
-	device into a low power state ... so that in some cases the device
-	may stay partly usable until this late.  This "late" call may also
-	help when coping with hardware that behaves badly.
+	been abstracted into class.suspend().
 
 The pm_message_t parameter is currently used to refine those semantics
 (described later).
@@ -351,19 +335,11 @@ devices processing each phase's calls before the next phase begins.
 
 The phases are seen by driver notifications issued in this order:
 
-   1	bus.resume_early(dev) is called with IRQs disabled, and with
-   	only one CPU active.  As with bus.suspend_late(), this method
-	won't be supported on busses that require IRQs in order to
-	interact with devices.
-
-	This reverses the effects of bus.suspend_late().
-
-   2	bus.resume(dev) is called next.  This may be morphed into a device
-   	driver call with bus-specific parameters; implementations may sleep.
-
-	This reverses the effects of bus.suspend().
+   1	bus.resume(dev) reverses the effects of bus.suspend().  This may
+	be morphed into a device driver call with bus-specific parameters;
+	implementations may sleep.
 
-   3	class.resume(dev) is called for devices associated with a class
+   2	class.resume(dev) is called for devices associated with a class
 	that has such a method.  Implementations may sleep.
 
 	This reverses the effects of class.suspend(), and would usually
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 82b7a43aadb..5f83fd24ea8 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -178,5 +178,5 @@ Consumers can uregister interest by calling :-
 int regulator_unregister_notifier(struct regulator *regulator,
 				struct notifier_block *nb);
 
-Regulators use the kernel notifier framework to send event to thier interested
+Regulators use the kernel notifier framework to send event to their interested
 consumers.
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index bdcb332bd7f..0cded696ca0 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -119,7 +119,7 @@ Some terms used in this document:-
                    battery power, USB power)
 
                    Regulator Domains: is the new current limit within the
-                   regulator operating parameters for input/ouput voltage.
+                   regulator operating parameters for input/output voltage.
 
                    If the regulator request passes all the constraint tests
                    then the new regulator value is applied.
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 2ebdc6091ce..514b94fc931 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -63,7 +63,7 @@ hardware during resume operations where a value can be set that will
 survive a reboot.
 
 Consequence is that after a resume (even if it is successful) your system
-clock will have a value corresponding to the magic mumber instead of the
+clock will have a value corresponding to the magic number instead of the
 correct date/time! It is therefore advisable to use a program like ntp-date
 or rdate to reset the correct date/time from an external time source when
 using this trace option.
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 7b99636564c..b967cd9137d 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -109,7 +109,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
 still frozen when the device is being closed).
 
 Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap parition, called the resume
+snapshot image from/to the kernel will use a swap partition, called the resume
 partition, or a swap file as storage space (if a swap file is used, the resume
 partition is the partition that holds this file).  However, this is not really
 required, as they can use, for example, a special (blank) suspend partition or
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d16b7a1c379..8d999d862d0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1356,7 +1356,7 @@ platforms are moved over to use the flattened-device-tree model.
     - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
 			  for, used if phy-address is absent. bit 0x00000001 is
 			  MDIO address 0.
-			  For Axon it can be absent, thouugh my current driver
+			  For Axon it can be absent, though my current driver
 			  doesn't handle phy-address yet so for now, keep
 			  0x00ffffff in it.
     - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
@@ -1438,7 +1438,7 @@ platforms are moved over to use the flattened-device-tree model.
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellanious
+   of standard device types (network, serial, etc.) and miscellaneous
    devices (gpio, LCD, spi, etc).  Also, since these devices are
    implemented within the fpga fabric every instance of the device can be
    synthesised with different options that change the behaviour.
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d28eeb..e8b5bc24d0a 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
 - reg : Should contain the address and the length of the GPIO bank
   register.
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
index 088fc471e03..160c752484b 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
@@ -19,7 +19,7 @@ Example:
 	reg = <119c0 30>;
      }
 
-* Properties common to mulitple CPM/QE devices
+* Properties common to multiple CPM/QE devices
 
 - fsl,cpm-command : This value is ORed with the opcode and command flag
                     to specify the device on which a CPM command operates.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfede1b..349f79fd707 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
   "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
   "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
index b26b91992c5..bcc30bac683 100644
--- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
@@ -1,6 +1,6 @@
 * Freescale MSI interrupt controller
 
-Reguired properities:
+Required properties:
 - compatible : compatible list, contains 2 entries,
   first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
index 02f6f43ee1b..07256b7ffca 100644
--- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -15,8 +15,8 @@ Properties:
   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
   apply to "fsl,mpc8641d-pmc".
 
-  Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
-  bit assigments are indicated via the sleep specifier in each device's
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
   sleep property.
 
 - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 06da4d4b44f..2031ddb33d0 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -225,7 +225,7 @@ For example, to match the 8323, revision 1.0:
      soc.major = 1
      soc.minor = 0
 
-'padding' is neccessary for structure alignment.  This field ensures that the
+'padding' is necessary for structure alignment.  This field ensures that the
 'extended_modes' field is aligned on a 64-bit boundary.
 
 'extended_modes' is a bitfield that defines special functionality which has an
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 7224459b469..aae8355d316 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -131,8 +131,8 @@ Example:
   	}
 
   	/* Add new node and rebalance tree. */
-  	rb_link_node(data->node, parent, new);
-  	rb_insert_color(data->node, root);
+  	rb_link_node(&data->node, parent, new);
+  	rb_insert_color(&data->node, root);
 
 	return TRUE;
   }
@@ -146,10 +146,10 @@ To remove an existing node from a tree, call:
 
 Example:
 
-  struct mytype *data = mysearch(mytree, "walrus");
+  struct mytype *data = mysearch(&mytree, "walrus");
 
   if (data) {
-  	rb_erase(data->node, mytree);
+  	rb_erase(&data->node, &mytree);
   	myfree(data);
   }
 
@@ -188,5 +188,5 @@ Example:
 
   struct rb_node *node;
   for (node = rb_first(&mytree); node; node = rb_next(node))
-  	printk("key=%s\n", rb_entry(node, int, keystring));
+	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
 
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 10711d9f078..1eb576a023b 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -1984,7 +1984,7 @@ break *$pc
 
 break *0x400618
 
-heres a really useful one for large programs
+Here's a really useful one for large programs
 rbr
 Set a breakpoint for all functions matching REGEXP
 e.g.
@@ -2211,7 +2211,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
 #5  0x51692c in readline_internal () at readline.c:521
 #6  0x5164fe in readline (prompt=0x7ffff810 "\177�ÿ�øx\177�ÿ�÷�Ø\177�ÿ�øx�À")
     at readline.c:349
-#7  0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1,
+#7  0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
     annotation_suffix=0x4d6b44 "prompt") at top.c:2091
 #8  0x4d6cf0 in command_loop () at top.c:1345
 #9  0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.txt
index e2bae5a577e..3ac1e46d536 100644
--- a/Documentation/scheduler/sched-nice-design.txt
+++ b/Documentation/scheduler/sched-nice-design.txt
@@ -55,7 +55,7 @@ To sum it up: we always wanted to make nice levels more consistent, but
 within the constraints of HZ and jiffies and their nasty design level
 coupling to timeslices and granularity it was not really viable.
 
-The second (less frequent but still periodically occuring) complaint
+The second (less frequent but still periodically occurring) complaint
 about Linux's nice level support was its assymetry around the origo
 (which you can see demonstrated in the picture above), or more
 accurately: the fact that nice level behavior depended on the _absolute_
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 5ba4d3fc625..1df7f9cdab0 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -4,6 +4,7 @@
 CONTENTS
 ========
 
+0. WARNING
 1. Overview
   1.1 The problem
   1.2 The solution
@@ -14,6 +15,23 @@ CONTENTS
 3. Future plans
 
 
+0. WARNING
+==========
+
+ Fiddling with these settings can result in an unstable system, the knobs are
+ root only and assumes root knows what he is doing.
+
+Most notable:
+
+ * very small values in sched_rt_period_us can result in an unstable
+   system when the period is smaller than either the available hrtimer
+   resolution, or the time it takes to handle the budget refresh itself.
+
+ * very small values in sched_rt_runtime_us can result in an unstable
+   system when the runtime is so small the system has difficulty making
+   forward progress (NOTE: the migration thread and kstopmachine both
+   are real-time processes).
+
 1. Overview
 ===========
 
@@ -169,7 +187,7 @@ get their allocated time.
 
 Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
-the limited static priority levels 0-139. With deadline scheduling you need to
+the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
 deadline delta (deadline - now).
 
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 683ccae00ad..c014eccaf19 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -194,7 +194,7 @@ The following information is available in this file:
           - Packetized SCSI Protocol at 160MB/s and 320MB/s
           - Quick Arbitration Selection (QAS)
           - Retained Training Information (Rev B. ASIC only)
-        - Interrupt Coalessing
+        - Interrupt Coalescing
         - Initiator Mode (target mode not currently 
           supported)
         - Support for the PCI-X standard up to 133MHz
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 230e30846ef..08e2b4d04aa 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -206,7 +206,7 @@ of MOVE MEMORY instructions.
 The 896 and the 895A allows handling of the phase mismatch context from 
 SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
 until the C code has saved the context of the transfer).
-Implementing this without using LOAD/STORE instructions would be painfull 
+Implementing this without using LOAD/STORE instructions would be painful 
 and I didn't even want to try it.
 
 The 896 chip supports 64 bit PCI transactions and addressing, while the 
@@ -240,7 +240,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown SCSI devices do not properly support tagged command queuing.
+Some known SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that the hard disks I use on my machines behave well with 
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 49ea5c58c6b..eb9a7b905b6 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -206,7 +206,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown old SCSI devices do not properly support tagged command queuing.
+Some known old SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that I never have had problem with tagged queuing using 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 012858d2b11..4252697a95d 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -460,6 +460,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-ctxfi
+  ----------------
+
+    Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
+	* Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
+	* Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
+	* Creative Sound Blaster X-Fi Titanium Professional Audio
+	* Creative Sound Blaster X-Fi Titanium
+	* Creative Sound Blaster X-Fi Elite Pro
+	* Creative Sound Blaster X-Fi Platinum
+	* Creative Sound Blaster X-Fi Fatal1ty
+	* Creative Sound Blaster X-Fi XtremeGamer
+	* Creative Sound Blaster X-Fi XtremeMusic
+
+    reference_rate	- reference sample rate, 44100 or 48000 (default)
+    multiple		- multiple to ref. sample rate, 1 or 2 (default)
+
+    This module supports multiple cards.
+
   Module snd-darla20
   ------------------
 
@@ -754,7 +773,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     single_cmd  - Use single immediate commands to communicate with
 		codecs (for debugging only)
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
-    power_save	- Automatic power-saving timtout (in second, 0 =
+    power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
     power_save_controller - Reset HD-audio controller in power-saving mode
 		(default = on)
@@ -925,6 +944,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* Onkyo SE-90PCI
 			* Onkyo SE-200PCI
 			* ESI Juli@
+			* ESI Maya44
 			* Hercules Fortissimo IV
 			* EGO-SYS WaveTerminal 192M
 
@@ -933,7 +953,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 		  prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
 		  juli, aureon51, aureon71, universe, ap192, k8x800,
 		  phase22, phase28, ms300, av710, se200pci, se90pci,
-		  fortissimo4, sn25p, WT192M
+		  fortissimo4, sn25p, WT192M, maya44
 
     This module supports multiple cards and autoprobe.
 
@@ -1093,6 +1113,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     This module supports multiple cards.
     The driver requires the firmware loader support on kernel.
 
+  Module snd-lx6464es
+  -------------------
+
+    Module for Digigram LX6464ES boards
+
+    This module supports multiple cards.
+
   Module snd-maestro3
   -------------------
 
@@ -1543,13 +1570,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-sc6000
   -----------------
 
-    Module for Gallant SC-6000 soundcard.
+    Module for Gallant SC-6000 soundcard and later models: SC-6600
+    and SC-7000.
 
     port	- Port # (0x220 or 0x240)
     mss_port	- MSS Port # (0x530 or 0xe80)
     irq		- IRQ # (5,7,9,10,11)
     mpu_irq	- MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
     dma		- DMA # (1,3,0)
+    joystick	- Enable gameport - 0 = disable (default), 1 = enable
 
     This module supports multiple cards.
 
@@ -1859,7 +1888,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+    (Deluxe) and Essence STX.
 
     This module supports autoprobe and multiple cards.
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 8eec05bc079..de8e10a9410 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -36,6 +36,7 @@ ALC260
   acer		Acer TravelMate
   will		Will laptops (PB V7900)
   replacer	Replacer 672V
+  favorit100	Maxdata Favorit 100XS
   basic		fixed pin assignment (old default model)
   test		for testing/debugging purpose, almost all controls can
 		adjusted.  Appearing only when compiled with
@@ -85,10 +86,11 @@ ALC269
   eeepc-p703	ASUS Eeepc P703 P900A
   eeepc-p901	ASUS Eeepc P901 S101
   fujitsu	FSC Amilo
+  lifebook	Fujitsu Lifebook S6420
   auto		auto-config reading BIOS (default)
 
-ALC662/663
-==========
+ALC662/663/272
+==============
   3stack-dig	3-stack (2-channel) with SPDIF
   3stack-6ch	 3-stack (6-channel)
   3stack-6ch-dig 3-stack (6-channel) with SPDIF
@@ -107,6 +109,9 @@ ALC662/663
   asus-mode4	ASUS
   asus-mode5	ASUS
   asus-mode6	ASUS
+  dell		Dell with ALC272
+  dell-zm1	Dell ZM1 with ALC272
+  samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
 ALC882/885
@@ -118,6 +123,7 @@ ALC882/885
   asus-a7j	ASUS A7J
   asus-a7m	ASUS A7M
   macpro	MacPro support
+  mb5		Macbook 5,1
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
@@ -133,10 +139,12 @@ ALC883/888
   acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
+  acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
   targa-dig	Targa/MSI
-  targa-2ch-dig	Targs/MSI with 2-channel
+  targa-2ch-dig	Targa/MSI with 2-channel
+  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
   laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
   lenovo-101e	Lenovo 101E
   lenovo-nb0763	Lenovo NB0763
@@ -150,6 +158,9 @@ ALC883/888
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  asus-p5q	ASUS P5Q-EM boards
+  mb31		MacBook 3,1
+  sony-vaio-tt  Sony VAIO TT
   auto		auto-config reading BIOS (default)
 
 ALC861/660
@@ -334,6 +345,7 @@ STAC9227/9228/9229/927x
   ref-no-jd	Reference board without HP/Mic jack detection
   3stack	D965 3stack
   5stack	D965 5stack + SPDIF
+  5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
   auto		BIOS setup (default)
@@ -347,6 +359,7 @@ STAC92HD71B*
   hp-m4		HP mini 1000
   hp-dv5	HP dv series
   hp-hdx	HP HDX series
+  hp-dv4-1222nr	HP dv4-1222nr (with LED support)
   auto		BIOS setup (default)
 
 STAC92HD73*
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 88b7433d2f1..71ac995b191 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -16,7 +16,7 @@ methods for the	HD-audio hardware.
 The HD-audio component consists of two parts: the controller chip and 
 the codec chips on the HD-audio bus.  Linux provides a single driver
 for all controllers, snd-hda-intel.  Although the driver name contains
-a word of a well-known harware vendor, it's not specific to it but for
+a word of a well-known hardware vendor, it's not specific to it but for
 all controller chips by other companies.  Since the HD-audio
 controllers are supposed to be compatible, the single snd-hda-driver
 should work in most cases.  But, not surprisingly, there are known
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index bba2dbb79d8..381908d8ca4 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -88,21 +88,34 @@ card*/pcm*/info
 	substreams, etc.
 
 card*/pcm*/xrun_debug
-	This file appears when CONFIG_SND_DEBUG=y.
-	This shows the status of xrun (= buffer overrun/xrun) debug of
-	ALSA PCM middle layer, as an integer from 0 to 2.  The value
-	can be changed by writing to this file, such as
-
-		 # cat 2 > /proc/asound/card0/pcm0p/xrun_debug
-
-	When this value is greater than 0, the driver will show the
-	messages to kernel log when an xrun is detected.  The debug
-	message is shown also when the invalid H/W pointer is detected
-	at the update of periods (usually called from the interrupt
+	This file appears when CONFIG_SND_DEBUG=y and
+	CONFIG_PCM_XRUN_DEBUG=y.
+	This shows the status of xrun (= buffer overrun/xrun) and
+	invalid PCM position debug/check of ALSA PCM middle layer.
+	It takes an integer value, can be changed by writing to this
+	file, such as
+
+		 # cat 5 > /proc/asound/card0/pcm0p/xrun_debug
+
+	The value consists of the following bit flags:
+	  bit 0 = Enable XRUN/jiffies debug messages
+	  bit 1 = Show stack trace at XRUN / jiffies check
+	  bit 2 = Enable additional jiffies check
+
+	When the bit 0 is set, the driver will show the messages to
+	kernel log when an xrun is detected.  The debug message is
+	shown also when the invalid H/W pointer is detected at the
+	update of periods (usually called from the interrupt
 	handler).
 
-	When this value is greater than 1, the driver will show the
-	stack trace additionally.  This may help the debugging.
+	When the bit 1 is set, the driver will show the stack trace
+	additionally.  This may help the debugging.
+
+	Since 2.6.30, this option can enable the hwptr check using
+	jiffies.  This detects spontaneous invalid pointer callback
+	values, but can be lead to too much corrections for a (mostly
+	buggy) hardware that doesn't give smooth pointer updates.
+	This feature is enabled via the bit 2.
 
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44
new file mode 100644
index 00000000000..0e41576fa13
--- /dev/null
+++ b/Documentation/sound/alsa/README.maya44
@@ -0,0 +1,163 @@
+NOTE: The following is the original document of Rainer's patch that the
+current maya44 code based on.  Some contents might be obsoleted, but I
+keep here as reference -- tiwai
+
+----------------------------------------------------------------
+ 
+STATE OF DEVELOPMENT:
+
+This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann.
+Development is carried out by Rainer Zimmermann (mail@lightshed.de).
+
+ESI provided a sample Maya44 card for the development work.
+
+However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing.
+
+This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008).
+
+
+The following functions work, as tested by Rainer Zimmermann and Piotr Makowski:
+
+- playback and capture at all sampling rates
+- input/output level
+- crossmixing
+- line/mic switch
+- phantom power switch
+- analogue monitor a.k.a bypass
+
+
+The following functions *should* work, but are not fully tested:
+
+- Channel 3+4 analogue - S/PDIF input switching
+- S/PDIF output
+- all inputs/outputs on the M/IO/DIO extension card
+- internal/external clock selection
+
+
+*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.*
+
+
+Things that do not seem to work:
+
+- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code).
+
+- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down.
+
+
+DRIVER DETAILS:
+
+the following files were added:
+
+pci/ice1724/maya44.c        - Maya44 specific code
+pci/ice1724/maya44.h
+pci/ice1724/ice1724.patch
+pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES)
+i2c/other/wm8776.c  - low-level access routines for Wolfson WM8776 codecs 
+include/wm8776.h
+
+
+Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure.
+This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately.
+
+
+the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree:
+
+wtm.h
+vt1720_mobo.h
+revo.h
+prodigy192.h
+pontis.h
+phase.h
+maya44.h
+juli.h
+aureon.h
+amp.h
+envy24ht.h
+se.h
+prodigy_hifi.h
+
+
+*I hope this is the correct way to do things.*
+
+
+SAMPLING RATES:
+
+The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture.
+
+As the ICE1724 chip only allows one global sampling rate, this is handled as follows:
+
+* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels.
+
+* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices.
+
+*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality.
+
+
+I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic.
+
+The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712).
+
+
+SOUND DEVICES:
+
+PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0):
+
+hw:0,0 input - stereo, analog input 1+2
+hw:0,0 output - stereo, analog output 1+2
+hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input
+hw:0,1 output - stereo, analog output 3+4 (and SPDIF out)
+
+
+NAMING OF MIXER CONTROLS:
+
+(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software).
+
+
+PCM: (digital) output level for channel 1+2
+PCM 1: same for channel 3+4
+
+Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on input 1/2.
+    Make sure this is not turned on while any other source is connected to input 1/2.
+    It might damage the source and/or the maya44 card.
+
+Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
+
+Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver.
+Bypass 1: same for channel 3+4.
+
+Crossmix: cross-mixer from channels 1+2 to channels 3+4
+Crossmix 1: cross-mixer from channels 3+4 to channels 1+2
+
+IEC958 Output: switch for S/PDIF output.
+    This is not supported by the ESI windows driver.
+    S/PDIF should output the same signal as channel 3+4. [untested!]
+
+
+Digitial output selectors:
+
+    These switches allow a direct digital routing from the ADCs to the DACs.
+    Each switch determines where the digital input data to one of the DACs comes from.
+    They are not supported by the ESI windows driver.
+    For normal operation, they should all be set to "PCM out".
+
+H/W: Output source channel 1
+H/W 1: Output source channel 2
+H/W 2: Output source channel 3
+H/W 3: Output source channel 4
+
+H/W 4 ... H/W 9: unknown function, left in to enable testing.
+    Possibly some of these control S/PDIF output(s).
+    If these turn out to be unused, they will go away in later driver versions.
+
+Selectable values for each of the digital output selectors are:
+   "PCM out" -> DAC output of the corresponding channel (default setting)
+   "Input 1"...
+   "Input 4" -> direct routing from ADC output of the selected input channel
+
+
+--------
+
+Feb 14, 2008
+Rainer Zimmermann
+mail@lightshed.de
+
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 34e87ec1379..de8efbc7e4b 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -114,7 +114,7 @@ For writing a sequence of verbs, use snd_hda_sequence_write().
 
 There are variants of cached read/write, snd_hda_codec_write_cache(),
 snd_hda_sequence_write_cache().  These are used for recording the
-register states for the power-mangement resume.  When no PM is needed,
+register states for the power-management resume.  When no PM is needed,
 these are equivalent with non-cached version.
 
 To retrieve the number of sub nodes connected to the given node, use
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 9e6763264a2..9ac842be9b4 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -62,6 +62,7 @@ Audio DAPM widgets fall into a number of types:-
  o Mic        - Mic (and optional Jack)
  o Line       - Line Input/Output (and optional Jack)
  o Speaker    - Speaker
+ o Supply     - Power or clock supply widget used by other widgets.
  o Pre        - Special PRE widget (exec before all others)
  o Post       - Special POST widget (exec after all others)
 
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index f11ca7979fa..322a00bb99d 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -32,6 +32,7 @@ show up in /proc/sys/kernel:
 - kstack_depth_to_print       [ X86 only ]
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
+- modules_disabled
 - msgmax
 - msgmnb
 - msgmni
@@ -184,6 +185,16 @@ kernel stack.
 
 ==============================================================
 
+modules_disabled:
+
+A toggle value indicating if modules are allowed to be loaded
+in an otherwise modular kernel.  This toggle defaults to off
+(0), but can be set true (1).  Once true, modules can be
+neither loaded nor unloaded, and the toggle cannot be set back
+to false.
+
+==============================================================
+
 osrelease, ostype & version:
 
 # cat osrelease
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index b716d33912d..6fab2dcbb4d 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -360,7 +358,7 @@ nr_pdflush_threads
 The current number of pdflush threads.  This value is read-only.
 The value changes according to the number of dirty pages in the system.
 
-When neccessary, additional pdflush threads are created, one per second, up to
+When necessary, additional pdflush threads are created, one per second, up to
 nr_pdflush_threads_max.
 
 ==============================================================
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.
@@ -593,7 +565,7 @@ swappiness
 
 This control is used to define how aggressive the kernel will swap
 memory pages.  Higher values will increase agressiveness, lower values
-descrease the amount of swap.
+decrease the amount of swap.
 
 The default value is 60.
 
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index e7c09abcfab..04763a32552 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -7,7 +7,7 @@ by Intel and Microsoft which can be found at
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,
-each of which can generate oneshot interupts and at least one of which has
+each of which can generate oneshot interrupts and at least one of which has
 additional hardware to support periodic interrupts.  The comparators are
 also called "timers", which can be misleading since usually timers are
 independent of each other ... these share a counter, complicating resets.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 20d368c5981..9bd00fc2e82 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -62,7 +62,7 @@ Timerstats sample period: 3.888770 s
 
 The first column is the number of events, the second column the pid, the third
 column is the name of the process. The forth column shows the function which
-initialized the timer and in parantheses the callback function which was
+initialized the timer and in parenthesis the callback function which was
 executed on expiry.
 
     Thomas, Ingo
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
new file mode 100644
index 00000000000..f157d7594ea
--- /dev/null
+++ b/Documentation/trace/events.txt
@@ -0,0 +1,90 @@
+			     Event Tracing
+
+		Documentation written by Theodore Ts'o
+			Updated by Li Zefan
+
+1. Introduction
+===============
+
+Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions
+using the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system;
+the kernel developer must provide code snippets which define how the
+tracing information is saved into the tracing buffer, and how the
+tracing information should be printed.
+
+2. Using Event Tracing
+======================
+
+2.1 Via the 'set_event' interface
+---------------------------------
+
+The events which are available for tracing can be found in the file
+/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it
+to /debug/tracing/set_event. For example:
+
+	# echo sched_wakeup >> /debug/tracing/set_event
+
+[ Note: '>>' is necessary, otherwise it will firstly disable
+  all the events. ]
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point:
+
+	# echo '!sched_wakeup' >> /debug/tracing/set_event
+
+To disable all events, echo an empty line to the set_event file:
+
+	# echo > /debug/tracing/set_event
+
+To enable all events, echo '*:*' or '*:' to the set_event file:
+
+	# echo *:* > /debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>.  The
+subsystem name is optional, but it is displayed in the available_events
+file.  All of the events in a subsystem can be specified via the syntax
+"<subsystem>:*"; for example, to enable all irq events, you can use the
+command:
+
+	# echo 'irq:*' > /debug/tracing/set_event
+
+2.2 Via the 'enable' toggle
+---------------------------
+
+The events available are also listed in /debug/tracing/events/ hierarchy
+of directories.
+
+To enable event 'sched_wakeup':
+
+	# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To disable it:
+
+	# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To enable all events in sched subsystem:
+
+	# echo 1 > /debug/tracing/events/sched/enable
+
+To eanble all events:
+
+	# echo 1 > /debug/tracing/events/enable
+
+When reading one of these enable files, there are four results:
+
+ 0 - all events this file affects are disabled
+ 1 - all events this file affects are enabled
+ X - there is a mixture of events enabled and disabled
+ ? - this file does not affect any event
+
+3. Defining an event-enabled tracepoint
+=======================================
+
+See The example provided in samples/trace_events
+
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index fd9a3e69381..7bd27f0e288 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured.
 
 	Function call tracer to trace all kernel functions.
 
-  "function_graph_tracer"
+  "function_graph"
 
 	Similar to the function tracer except that the
 	function tracer probes the functions on their entry
@@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice
 values starting at 100 (nice -20). Below is a quick chart to map
 the kernel priority to user land priorities.
 
-  Kernel priority: 0 to 99    ==> user RT priority 99 to 0
-  Kernel priority: 100 to 139 ==> user nice -20 to 19
-  Kernel priority: 140        ==> idle task priority
+   Kernel Space                     User Space
+ ===============================================================
+   0(high) to  98(low)     user RT priority 99(high) to 1(low)
+                           with SCHED_RR or SCHED_FIFO
+ ---------------------------------------------------------------
+  99                       sched_priority is not used in scheduling
+                           decisions(it must be specified as 0)
+ ---------------------------------------------------------------
+ 100(high) to 139(low)     user nice -20(high) to 19(low)
+ ---------------------------------------------------------------
+ 140                       idle task priority
+ ---------------------------------------------------------------
 
 The task states are:
 
@@ -1825,4 +1834,4 @@ an error.
 -----------
 
 More details can be found in the source code, in the
-kernel/tracing/*.c files.
+kernel/trace/*.c files.
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
index a956d9b7f94..6308735e58c 100644
--- a/Documentation/trace/kmemtrace.txt
+++ b/Documentation/trace/kmemtrace.txt
@@ -64,7 +64,7 @@ III. Quick usage guide
 CONFIG_KMEMTRACE).
 
 2) Get the userspace tool and build it:
-$ git-clone git://repo.or.cz/kmemtrace-user.git		# current repository
+$ git clone git://repo.or.cz/kmemtrace-user.git		# current repository
 $ cd kmemtrace-user/
 $ ./autogen.sh
 $ ./configure
diff --git a/Documentation/trace/power.txt b/Documentation/trace/power.txt
new file mode 100644
index 00000000000..cd805e16dc2
--- /dev/null
+++ b/Documentation/trace/power.txt
@@ -0,0 +1,17 @@
+The power tracer collects detailed information about C-state and P-state
+transitions, instead of just looking at the high-level "average"
+information.
+
+There is a helper script found in scrips/tracing/power.pl in the kernel
+sources which can be used to parse this information and create a
+Scalable Vector Graphics (SVG) picture from the trace data.
+
+To use this tracer:
+
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	echo power > /sys/kernel/debug/tracing/current_tracer
+	echo 1 > /sys/kernel/debug/tracing/tracing_enabled
+	sleep 1
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	cat /sys/kernel/debug/tracing/trace | \
+		perl scripts/tracing/power.pl > out.sv
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c3d62c7843..c480e9c32db 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -84,7 +84,7 @@ The different logical parts of this driver are:
 
       *UWB*: the Ultra-Wide-Band stack -- manages the radio and
       associated spectrum to allow for devices sharing it. Allows to
-      control bandwidth assingment, beaconing, scanning, etc
+      control bandwidth assignment, beaconing, scanning, etc
 
     *
 
@@ -184,7 +184,7 @@ and sends the replies and notifications back to the API
 [/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
 is chartered, among other things, to keep the tab of how the UWB radio
 neighborhood looks, creating and destroying devices as they show up or
-dissapear.
+disappear.
 
 Command execution is very simple: a command block is sent and a event
 block or reply is expected back. For sending/receiving command/events, a
@@ -333,7 +333,7 @@ read descriptors and move our data.
 
 *Device life cycle and keep alives*
 
-Everytime there is a succesful transfer to/from a device, we update a
+Every time there is a successful transfer to/from a device, we update a
 per-device activity timestamp. If not, every now and then we check and
 if the activity timestamp gets old, we ping the device by sending it a
 Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
@@ -411,7 +411,7 @@ context (wa_xfer) and submit it. When the xfer is done, our callback is
 called and we assign the status bits and release the xfer resources.
 
 In dequeue() we are basically cancelling/aborting the transfer. We issue
-a xfer abort request to the HC, cancell all the URBs we had submitted
+a xfer abort request to the HC, cancel all the URBs we had submitted
 and not yet done and when all that is done, the xfer callback will be
 called--this will call the URB callback.
 
diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt
index 6f24f566955..fe6a99a32bb 100644
--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@@ -27,7 +27,7 @@ Association and disassociation of URBs with anchors
 
 An association of URBs to an anchor is made by an explicit
 call to usb_anchor_urb(). The association is maintained until
-an URB is finished by (successfull) completion. Thus disassociation
+an URB is finished by (successful) completion. Thus disassociation
 is automatic. A function is provided to forcibly finish (kill)
 all URBs associated with an anchor.
 Furthermore, disassociation can be made with usb_unanchor_urb()
@@ -76,4 +76,4 @@ usb_get_from_anchor()
 Returns the oldest anchored URB of an anchor. The URB is unanchored
 and returned with a reference. As you may mix URBs to several
 destinations in one anchor you have no guarantee the chronologically
-first submitted URB is returned.
\ No newline at end of file
+first submitted URB is returned.
diff --git a/Documentation/usb/callbacks.txt b/Documentation/usb/callbacks.txt
index 7c812411945..bfb36b34b79 100644
--- a/Documentation/usb/callbacks.txt
+++ b/Documentation/usb/callbacks.txt
@@ -65,7 +65,7 @@ Accept or decline an interface. If you accept the device return 0,
 otherwise -ENODEV or -ENXIO. Other error codes should be used only if a
 genuine error occurred during initialisation which prevented a driver
 from accepting a device that would else have been accepted.
-You are strongly encouraged to use usbcore'sfacility,
+You are strongly encouraged to use usbcore's facility,
 usb_set_intfdata(), to associate a data structure with an interface, so
 that you know which internal state and identity you associate with a
 particular interface. The device will not be suspended and you may do IO
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 914cb7e734a..4652c0f5da3 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -11,7 +11,7 @@ encoder chip:
 2) Some people have problems getting the i2c bus to work.
    The symptom is that the eeprom cannot be read and the card is
    unusable. This is probably fixed, but if you have problems
-   then post to the video4linux or ivtv-users mailinglist.
+   then post to the video4linux or ivtv-users mailing list.
 
 3) VBI (raw or sliced) has not yet been implemented.
 
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index e0203662f9e..8da3a795083 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -50,6 +50,10 @@ Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
 Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
 		pointer to single linked list of struct	setup_data.
 
+Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
+		beyond the kernel_alignment added, new init_size and
+		pref_address fields.  Added extended boot loader IDs.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -168,12 +172,13 @@ Offset	Proto	Name		Meaning
 021C/4	2.00+	ramdisk_size	initrd size (set by boot loader)
 0220/4	2.00+	bootsect_kludge	DO NOT USE - for bootsect.S use only
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
-0226/2	N/A	pad1		Unused
+0226/1	2.02+(3 ext_loader_ver	Extended boot loader version
+0227/1	2.02+(3	ext_loader_type	Extended boot loader ID
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
 022C/4	2.03+	ramdisk_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/1	N/A	pad2		Unused
+0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
 0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
@@ -182,6 +187,8 @@ Offset	Proto	Name		Meaning
 024C/4	2.08+	payload_length	Length of kernel payload
 0250/8	2.09+	setup_data	64-bit physical pointer to linked list
 				of struct setup_data
+0258/8	2.10+	pref_address	Preferred loading address
+0260/4	2.10+	init_size	Linear memory required during initialization
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
@@ -190,6 +197,8 @@ Offset	Proto	Name		Meaning
     field are unusable, which means the size of a bzImage kernel
     cannot be determined.
 
+(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+
 If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
 the boot protocol version is "old".  Loading an old kernel, the
 following parameters should be assumed:
@@ -343,18 +352,32 @@ Protocol:	2.00+
   0xTV here, where T is an identifier for the boot loader and V is
   a version number.  Otherwise, enter 0xFF here.
 
+  For boot loader IDs above T = 0xD, write T = 0xE to this field and
+  write the extended ID minus 0x10 to the ext_loader_type field.
+  Similarly, the ext_loader_ver field can be used to provide more than
+  four bits for the bootloader version.
+
+  For example, for T = 0x15, V = 0x234, write:
+
+  type_of_loader  <- 0xE4
+  ext_loader_type <- 0x05
+  ext_loader_ver  <- 0x23
+
   Assigned boot loader ids:
 	0  LILO			(0x00 reserved for pre-2.00 bootloader)
 	1  Loadlin
 	2  bootsect-loader	(0x20, all other values reserved)
-	3  SYSLINUX
-	4  EtherBoot
+	3  Syslinux
+	4  Etherboot/gPXE
 	5  ELILO
 	7  GRUB
-	8  U-BOOT
+	8  U-Boot
 	9  Xen
 	A  Gujin
 	B  Qemu
+	C  Arcturus Networks uCbootloader
+	E  Extended		(see ext_loader_type)
+	F  Special		(0xFF = undefined)
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.
@@ -453,6 +476,35 @@ Protocol:	2.01+
   Set this field to the offset (from the beginning of the real-mode
   code) of the end of the setup stack/heap, minus 0x0200.
 
+Field name:	ext_loader_ver
+Type:		write (optional)
+Offset/size:	0x226/1
+Protocol:	2.02+
+
+  This field is used as an extension of the version number in the
+  type_of_loader field.  The total version number is considered to be
+  (type_of_loader & 0x0f) + (ext_loader_ver << 4).
+
+  The use of this field is boot loader specific.  If not written, it
+  is zero.
+
+  Kernels prior to 2.6.31 did not recognize this field, but it is safe
+  to write for protocol version 2.02 or higher.
+
+Field name:	ext_loader_type
+Type:		write (obligatory if (type_of_loader & 0xf0) == 0xe0)
+Offset/size:	0x227/1
+Protocol:	2.02+
+
+  This field is used as an extension of the type number in
+  type_of_loader field.  If the type in type_of_loader is 0xE, then
+  the actual type is (ext_loader_type + 0x10).
+
+  This field is ignored if the type in type_of_loader is not 0xE.
+
+  Kernels prior to 2.6.31 did not recognize this field, but it is safe
+  to write for protocol version 2.02 or higher.
+
 Field name:	cmd_line_ptr
 Type:		write (obligatory)
 Offset/size:	0x228/4
@@ -482,11 +534,19 @@ Protocol:	2.03+
   0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
 
 Field name:	kernel_alignment
-Type:		read (reloc)
+Type:		read/modify (reloc)
 Offset/size:	0x230/4
-Protocol:	2.05+
+Protocol:	2.05+ (read), 2.10+ (modify)
+
+  Alignment unit required by the kernel (if relocatable_kernel is
+  true.)  A relocatable kernel that is loaded at an alignment
+  incompatible with the value in this field will be realigned during
+  kernel initialization.
 
-  Alignment unit required by the kernel (if relocatable_kernel is true.)
+  Starting with protocol version 2.10, this reflects the kernel
+  alignment preferred for optimal performance; it is possible for the
+  loader to modify this field to permit a lesser alignment.  See the
+  min_alignment and pref_address field below.
 
 Field name:	relocatable_kernel
 Type:		read (reloc)
@@ -498,6 +558,22 @@ Protocol:	2.05+
   After loading, the boot loader must set the code32_start field to
   point to the loaded code, or to a boot loader hook.
 
+Field name:	min_alignment
+Type:		read (reloc)
+Offset/size:	0x235/1
+Protocol:	2.10+
+
+  This field, if nonzero, indicates as a power of two the minimum
+  alignment required, as opposed to preferred, by the kernel to boot.
+  If a boot loader makes use of this field, it should update the
+  kernel_alignment field with the alignment unit desired; typically:
+
+	kernel_alignment = 1 << min_alignment
+
+  There may be a considerable performance cost with an excessively
+  misaligned kernel.  Therefore, a loader should typically try each
+  power-of-two alignment from kernel_alignment down to this alignment.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4
@@ -582,6 +658,36 @@ Protocol:	2.09+
   sure to consider the case where the linked list already contains
   entries.
 
+Field name:	pref_address
+Type:		read (reloc)
+Offset/size:	0x258/8
+Protocol:	2.10+
+
+  This field, if nonzero, represents a preferred load address for the
+  kernel.  A relocating bootloader should attempt to load at this
+  address if possible.
+
+  A non-relocatable kernel will unconditionally move itself and to run
+  at this address.
+
+Field name:	init_size
+Type:		read
+Offset/size:	0x25c/4
+
+  This field indicates the amount of linear contiguous memory starting
+  at the kernel runtime start address that the kernel needs before it
+  is capable of examining its memory map.  This is not the same thing
+  as the total amount of memory the kernel needs to boot, but it can
+  be used by a relocating boot loader to help select a safe load
+  address for the kernel.
+
+  The kernel runtime start address is determined by the following algorithm:
+
+  if (relocatable_kernel)
+	runtime_start = align_up(load_address, kernel_alignment)
+  else
+	runtime_start = pref_address
+
 
 **** THE IMAGE CHECKSUM
 
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index 34c13040a71..29a6ff8bc7d 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -5,21 +5,51 @@ only the AMD64 specific ones are listed here.
 
 Machine check
 
-   mce=off disable machine check
-   mce=bootlog Enable logging of machine checks left over from booting.
-               Disabled by default on AMD because some BIOS leave bogus ones.
-               If your BIOS doesn't do that it's a good idea to enable though
-               to make sure you log even machine check events that result
-               in a reboot. On Intel systems it is enabled by default.
+   Please see Documentation/x86/x86_64/machinecheck for sysfs runtime tunables.
+
+   mce=off
+		Disable machine check
+   mce=no_cmci
+		Disable CMCI(Corrected Machine Check Interrupt) that
+		Intel processor supports.  Usually this disablement is
+		not recommended, but it might be handy if your hardware
+		is misbehaving.
+		Note that you'll get more problems without CMCI than with
+		due to the shared banks, i.e. you might get duplicated
+		error logs.
+   mce=dont_log_ce
+		Don't make logs for corrected errors.  All events reported
+		as corrected are silently cleared by OS.
+		This option will be useful if you have no interest in any
+		of corrected errors.
+   mce=ignore_ce
+		Disable features for corrected errors, e.g. polling timer
+		and CMCI.  All events reported as corrected are not cleared
+		by OS and remained in its error banks.
+		Usually this disablement is not recommended, however if
+		there is an agent checking/clearing corrected errors
+		(e.g. BIOS or hardware monitoring applications), conflicting
+		with OS's error handling, and you cannot deactivate the agent,
+		then this option will be a help.
+   mce=bootlog
+		Enable logging of machine checks left over from booting.
+		Disabled by default on AMD because some BIOS leave bogus ones.
+		If your BIOS doesn't do that it's a good idea to enable though
+		to make sure you log even machine check events that result
+		in a reboot. On Intel systems it is enabled by default.
    mce=nobootlog
 		Disable boot machine check logging.
-   mce=tolerancelevel (number)
+   mce=tolerancelevel[,monarchtimeout] (number,number)
+		tolerance levels:
 		0: always panic on uncorrected errors, log corrected errors
 		1: panic or SIGBUS on uncorrected errors, log corrected errors
 		2: SIGBUS or log uncorrected errors, log corrected errors
 		3: never panic or SIGBUS, log all errors (for testing only)
 		Default is 1
 		Can be also set using sysfs which is preferable.
+		monarchtimeout:
+		Sets the time in us to wait for other CPUs on machine checks. 0
+		to disable.
 
    nomce (for compatibility with i386): same as mce=off
 
@@ -150,11 +180,6 @@ NUMA
 		Otherwise, the remaining system RAM is allocated to an
 		additional node.
 
-  numa=hotadd=percent
-		Only allow hotadd memory to preallocate page structures upto
-		percent of already available memory.
-		numa=hotadd=0 will disable hotadd memory.
-
 ACPI
 
   acpi=off	Don't enable ACPI
diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck
index a05e58e7b15..b1fb3027328 100644
--- a/Documentation/x86/x86_64/machinecheck
+++ b/Documentation/x86/x86_64/machinecheck
@@ -41,7 +41,9 @@ check_interval
 	the polling interval.  When the poller stops finding MCEs, it
 	triggers an exponential backoff (poll less often) on the polling
 	interval. The check_interval variable is both the initial and
-	maximum polling interval.
+	maximum polling interval. 0 means no polling for corrected machine
+	check errors (but some corrected errors might be still reported
+	in other ways)
 
 tolerant
 	Tolerance level. When a machine check exception occurs for a non
@@ -67,6 +69,10 @@ trigger
 	Program to run when a machine check event is detected.
 	This is an alternative to running mcelog regularly from cron
 	and allows to detect events faster.
+monarch_timeout
+	How long to wait for the other CPUs to machine check too on a
+	exception. 0 to disable waiting for other CPUs.
+	Unit: us
 
 TBD document entries for AMD threshold interrupt configuration
 
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
index 29b52b14d0b..d6498e3cd71 100644
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
 hole caused by [48:63] sign extension
 ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
-ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
-ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
-ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
+ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
+ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
+ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
+ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
+ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b349ba4add..a1fe87ad483 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -71,7 +71,7 @@ P: Person
 M: Mail patches to
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
-T: SCM tree type and location.  Type is one of: git, hg, quilt.
+T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
 S: Status, one of the following:
 
 	Supported:	Someone is actually paid to look after this.
@@ -159,7 +159,8 @@ F:	drivers/net/r8169.c
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Orphan
+M:	alan@lxorguk.ukuu.org.uk
+S:	Odd Fixes
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -434,7 +435,7 @@ F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 P:	Thomas Dahlmann
-M:	thomas.dahlmann@amd.com
+M:	dahlmann.thomas@arcor.de
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -624,6 +625,7 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
+F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
 P:	Russell King
@@ -650,6 +652,7 @@ P:	Paulius Zaleckas
 M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
+F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
 P:	Russell King
@@ -678,6 +681,13 @@ M:	sakoman@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+F:	arch/arm/mach-pxa/hx4700.c
+F:	arch/arm/mach-pxa/include/mach/hx4700.h
+
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 P:	Kristoffer Ericson
 M:	kristoffer.ericson@gmail.com
@@ -1132,17 +1142,17 @@ F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Bryan Wu
-M:	cooloney@kernel.org
+P:	Mike Frysinger
+M:	vapier@gentoo.org
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Bryan Wu
-M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P:	Michael Hennerich
+M:	michael.hennerich@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
@@ -1150,7 +1160,7 @@ F:	drivers/net/bfin_mac.*
 BLACKFIN RTC DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
@@ -1158,7 +1168,7 @@ F:	drivers/rtc/rtc-bfin.c
 BLACKFIN SERIAL DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
@@ -1166,7 +1176,7 @@ F:	drivers/serial/bfin_5xx.c
 BLACKFIN WATCHDOG DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1184,7 @@ F:	drivers/watchdog/bfin_wdt.c
 BLACKFIN I2C TWI DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
@@ -1431,6 +1441,14 @@ P:	Russell King
 M:	linux@arm.linux.org.uk
 F:	include/linux/clk.h
 
+CISCO FCOE HBA DRIVER
+P:	Abhijeet Joglekar
+M:	abjoglek@cisco.com
+P:	Joe Eykholt
+M:	jeykholt@cisco.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1532,6 +1550,13 @@ W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
 F:	drivers/net/wan/cosa*
 
+CPMAC ETHERNET DRIVER
+P:	Florian Fainelli
+M:	florian@openwrt.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/cpmac.c
+
 CPU FREQUENCY DRIVERS
 P:	Dave Jones
 M:	davej@redhat.com
@@ -1784,10 +1809,10 @@ F:	drivers/char/epca*
 F:	drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:	Stephen Rothwell
-M:	sfr@canb.auug.org.au
+P:	Eric Paris
+M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
 F:	include/linux/dnotify.h
@@ -1961,10 +1986,20 @@ F:	Documentation/edac.txt
 F:	drivers/edac/edac_*
 F:	include/linux/edac.h
 
+EDAC-AMD64
+P:	Doug Thompson
+M:	dougthompson@xmission.com
+P:	Borislav Petkov
+M:	borislav.petkov@amd.com
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+W:	bluesmoke.sourceforge.net
+S:	Supported
+F:	drivers/edac/amd64_edac*
+
 EDAC-E752X
 P:	Mark Gross
-P:	Doug Thompson
 M:	mark.gross@intel.com
+P:	Doug Thompson
 M:	dougthompson@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
@@ -2077,6 +2112,15 @@ W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
+ENE CB710 FLASH CARD READER DRIVER
+P:	Michał Mirosław
+M:	mirq-linux@rere.qmqm.pl
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/misc/cb710/
+F:	drivers/mmc/host/cb710-mmc.*
+F:	include/linux/cb710.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 P:	Christopher Hoover
 M:	ch@murgatroid.com
@@ -2241,7 +2285,7 @@ P:	Li Yang
 M:	leoli@freescale.com
 P:	Zhang Wei
 M:	zw@zh-kernel.org
-L:	linuxppc-embedded@ozlabs.org
+L:	linuxppc-dev@ozlabs.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
@@ -2323,7 +2367,7 @@ F:	fs/freevxfs/
 
 FREEZER
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -2830,6 +2874,8 @@ P:	John McCutchan
 M:	john@johnmccutchan.com
 P:	Robert Love
 M:	rlove@rlove.org
+P:	Eric Paris
+M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
@@ -3333,6 +3379,16 @@ F:	drivers/serial/kgdboc.c
 F:	include/linux/kgdb.h
 F:	kernel/kgdb.c
 
+KMEMLEAK
+P:	Catalin Marinas
+M:	catalin.marinas@arm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/kmemleak.txt
+F:	include/linux/kmemleak.h
+F:	mm/kmemleak.c
+F:	mm/kmemleak-test.c
+
 KMEMTRACE
 P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
@@ -4119,6 +4175,69 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+OMAP SUPPORT
+P:	Tony Lindgren <tony@atomide.com>
+M:	tony@atomide.com
+L:	linux-omap@vger.kernel.org
+W:	http://www.muru.com/linux/omap/
+W:	http://linux.omap.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S:	Maintained
+F:	arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P:	Paul Walmsley
+M:	paul@pwsan.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P:	Kevin Hilman
+M:	khilman@deeprootsystems.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P:	Jarkko Nikula
+M:	jhnikula@gmail.com
+L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P:	Imre Deak
+M:	imre.deak@nokia.com
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap/
+
+OMAP MMC SUPPORT
+P:	Jarkko Lavinen
+M:	jarkko.lavinen@nokia.com
+L:	linux-kernel@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P:	Deepak Saxena
+M:	dsaxena@plexity.net
+S:	Maintained
+F:	drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+
 OMFS FILESYSTEM
 P:	Bob Copeland
 M:	me@bobcopeland.com
@@ -4375,6 +4494,16 @@ S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
 
+PERFORMANCE COUNTER SUBSYSTEM
+P:	Peter Zijlstra
+M:	a.p.zijlstra@chello.nl
+P:	Paul Mackerras
+M:	paulus@samba.org
+P:	Ingo Molnar
+M:	mingo@elte.hu
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+
 PERSONALITY HANDLING
 P:	Christoph Hellwig
 M:	hch@infradead.org
@@ -4547,7 +4676,7 @@ F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Russell King
 M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
@@ -4557,23 +4686,24 @@ F:	drivers/pcmcia/pxa2xx*
 F:	drivers/spi/pxa2xx*
 F:	drivers/usb/gadget/pxa2*
 F:	include/sound/pxa2xx-lib.h
-F:	sound/soc/pxa/pxa2xx*
+F:	sound/arm/pxa*
+F:	sound/soc/pxa
 
 PXA168 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Jason Chagas
 M:	jason.chagas@marvell.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA910 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA MMCI DRIVER
 S:	Orphan
@@ -5094,7 +5224,6 @@ P:	Vincent Sanders
 M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
-F:	arch/arm/mach-ebsa110/
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
@@ -5285,11 +5414,12 @@ P:	Liam Girdwood
 M:	lrg@slimlogic.co.uk
 P:	Mark Brown
 M:	broonie@opensource.wolfsonmicro.com
-T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (subscribers-only)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
 F:	sound/soc/
+F:	include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
 P:	David S. Miller
@@ -5507,20 +5637,6 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
-TI OMAP MMC INTERFACE DRIVER
-P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap@vger.kernel.org
-W:	http://linux.omap.com
-W:	http://www.muru.com/linux/omap/
-S:	Maintained
-F:	drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
-S:	Maintained
-F:	drivers/char/hw_random/omap-rng.c
-
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
@@ -5579,6 +5695,14 @@ M:	ian@mnementh.co.uk
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
+TMPFS (SHMEM FILESYSTEM)
+P:	Hugh Dickins
+M:	hugh.dickins@tiscali.co.uk
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/shmem_fs.h
+F:	mm/shmem.c
+
 TPM DEVICE DRIVER
 P:	Debora Velarde
 M:	debora@linux.vnet.ibm.com
@@ -5604,6 +5728,7 @@ P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
+T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
 
 TULIP NETWORK DRIVERS
 P:	Grant Grundler
diff --git a/Makefile b/Makefile
index 9b2b58c3b3d..03373bb703c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc5
-NAME = Vindictive Armadillo
+EXTRAVERSION =
+NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -533,7 +533,7 @@ endif
 
 include $(srctree)/arch/$(SRCARCH)/Makefile
 
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 62b363584b2..610dff44d94 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -256,5 +256,5 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 #define smp_mb__before_atomic_inc()	smp_mb()
 #define smp_mb__after_atomic_inc()	smp_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ALPHA_ATOMIC_H */
diff --git a/arch/alpha/include/asm/bitsperlong.h b/arch/alpha/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..ad57f786820
--- /dev/null
+++ b/arch/alpha/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_ALPHA_BITSPERLONG_H
+#define __ASM_ALPHA_BITSPERLONG_H
+
+#define __BITS_PER_LONG 64
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_ALPHA_BITSPERLONG_H */
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index 0995f9d1341..07af062544f 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -93,6 +93,6 @@ typedef struct page *pgtable_t;
 					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ALPHA_PAGE_H */
diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h
index 13c2305d35e..a9388300abb 100644
--- a/arch/alpha/include/asm/signal.h
+++ b/arch/alpha/include/asm/signal.h
@@ -111,7 +111,7 @@ typedef unsigned long sigset_t;
 #define SIG_UNBLOCK        2	/* for unblocking signals */
 #define SIG_SETMASK        3	/* for setting the signal mask */
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct osf_sigaction {
diff --git a/arch/alpha/include/asm/suspend.h b/arch/alpha/include/asm/suspend.h
deleted file mode 100644
index c7042d57585..00000000000
--- a/arch/alpha/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_SUSPEND_H
-#define __ALPHA_SUSPEND_H
-
-/* Dummy include. */
-
-#endif  /* __ALPHA_SUSPEND_H */
diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h
index f072f344497..bd621ecd1eb 100644
--- a/arch/alpha/include/asm/types.h
+++ b/arch/alpha/include/asm/types.h
@@ -25,9 +25,6 @@ typedef unsigned int umode_t;
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
-#define BITS_PER_LONG 64
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma_addr_t;
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 42ee05981e7..9a3334ae282 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -371,8 +371,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 	int retval = -EINVAL;
 	char *name;
 
-	lock_kernel();
-
 	name = getname(path);
 	retval = PTR_ERR(name);
 	if (IS_ERR(name))
@@ -392,7 +390,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 	}
 	putname(name);
  out:
-	unlock_kernel();
 	return retval;
 }
 
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 9c9d1fd4155..5bd5259324b 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 	}
 }
 
-static void
+static int
 dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&dp264_irq_lock);
 	cpu_set_irq_affinity(irq, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
+
+	return 0;
 }
 
-static void
+static int
 clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&dp264_irq_lock);
 	cpu_set_irq_affinity(irq - 16, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
+
+	return 0;
 }
 
 static struct hw_interrupt_type dp264_irq_type = {
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 27f840a4ad3..8dd239ebdb9 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 
 }
 
-static void
+static int
 titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&titan_irq_lock);
 	titan_cpu_set_irq_affinity(irq - 16, *affinity);
 	titan_update_irq_hw(titan_cached_irq_mask);
 	spin_unlock(&titan_irq_lock);
+
+	return 0;
 }
 
 static void
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
index 62dc379d301..813c9b63c0e 100644
--- a/arch/alpha/mm/extable.c
+++ b/arch/alpha/mm/extable.c
@@ -48,6 +48,27 @@ void sort_extable(struct exception_table_entry *start,
 	     cmp_ex, swap_ex);
 }
 
+#ifdef CONFIG_MODULES
+/*
+ * Any entry referring to the module init will be at the beginning or
+ * the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
+				  m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+
 const struct exception_table_entry *
 search_extable(const struct exception_table_entry *first,
 	       const struct exception_table_entry *last,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e60ec54df33..29475101a7b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION
 
 config GENERIC_GPIO
 	bool
-	default n
 
 config GENERIC_TIME
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
@@ -55,7 +52,6 @@ config MMU
 
 config NO_IOPORT
 	bool
-	default n
 
 config EISA
 	bool
@@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config ARCH_HAS_ILOG2_U32
 	bool
-	default n
 
 config ARCH_HAS_ILOG2_U64
 	bool
-	default n
 
 config GENERIC_HWEIGHT
 	bool
@@ -253,6 +247,14 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select CPU_SA110
@@ -273,17 +275,10 @@ config ARCH_EP93XX
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select CPU_FA526
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -292,6 +287,30 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+config ARCH_STMP3XXX
+	bool "Freescale STMP3xxx"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select USB_ARCH_HAS_EHCI
+	help
+	  Support for systems based on the Freescale 3xxx CPUs.
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -308,15 +327,6 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-	bool "IMX"
-	select CPU_ARM920T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -397,6 +407,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -404,28 +415,6 @@ config ARCH_KIRKWOOD
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
@@ -440,6 +429,7 @@ config ARCH_MV78XX0
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -447,23 +437,13 @@ config ARCH_MV78XX0
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -472,6 +452,52 @@ config ARCH_ORION5X
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 	  Orion-2 (5281), Orion-1-90 (6183).
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+	bool "Micrel/Kendin KS8695"
+	select CPU_ARM922T
+	select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+	  System-on-Chip devices.
+
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	select CPU_ARM926T
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+	bool "Nuvoton W90X900 CPU"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	select COMMON_CLKDEV
+	help
+		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+		can login www.mcuos.com or www.nuvoton.com to know more.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -494,19 +520,16 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MMP
-	bool "Marvell PXA168/910"
-	depends on MMU
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
+config ARCH_MSM
+	bool "Qualcomm MSM"
+	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
+	  interface to the ARM9 modem processor which runs the baseband stack
+	  and controls some vital subsystems (clock and power control, etc).
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -575,6 +598,20 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_U300
+	bool "ST-Ericsson U300 Series"
+	depends on MMU
+	select CPU_ARM926T
+	select ARM_AMBA
+	select ARM_VIC
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_GPIO
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -586,6 +623,7 @@ config ARCH_DAVINCI
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
+	select GENERIC_ALLOCATOR
 	help
 	  Support for TI's DaVinci platform.
 
@@ -599,24 +637,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM
-	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -680,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
@@ -706,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-u300/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -858,8 +880,11 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -877,6 +902,18 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config HAVE_ARM_SCU
+	bool
+	depends on SMP
+	help
+	  This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+	bool
+	depends on SMP
+	help
+	  This options enables support for the ARM timer and watchdog unit
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
@@ -915,8 +952,10 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 	default y
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -976,10 +1015,8 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default y
-	depends on FLATMEM
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
@@ -1022,12 +1059,12 @@ source "mm/Kconfig"
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
 		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182
+		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP
 	  correct operation of some network protocols. With an IP-only
 	  configuration it is safe to say N, otherwise say Y.
 
+config UACCESS_WITH_MEMCPY
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	default y if CPU_FEROCEON
+	help
+	  Implement faster copy_to_user and clear_user methods for CPU
+	  cores where a 8-word STM instruction give significantly higher
+	  memory write throughput than a sequence of individual 32bit stores.
+
+	  A possible side effect is a slight increase in scheduling latency
+	  between threads sharing the same address space if they invoke
+	  such copy operations with large buffers.
+
+	  However, if the CPU data cache is using a write-allocate mode,
+	  this option is unlikely to provide any performance gain.
+
 endmenu
 
 menu "Boot options"
@@ -1188,7 +1241,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_IMX && CPU_FREQ
-	default n
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
-	  If in doubt, say N.
+config CPU_FREQ_PXA
+	bool
+	depends on CPU_FREQ && ARCH_PXA && PXA25x
+	default y
+	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729bf13d..c877d6df23d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -11,6 +11,9 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux	+= --be8
+endif
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
@@ -99,64 +102,73 @@ CHECKFLAGS	+= -D__arm__
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
-
- machine-$(CONFIG_ARCH_RPC)	   := rpc
- machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
- machine-$(CONFIG_ARCH_SHARK)	   := shark
- machine-$(CONFIG_ARCH_SA1100)	   := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111)	   := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
 endif
- machine-$(CONFIG_ARCH_PXA)	   := pxa
- machine-$(CONFIG_ARCH_MMP)	   := mmp
-    plat-$(CONFIG_PLAT_PXA)	   := pxa
- machine-$(CONFIG_ARCH_L7200)	   := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI)     := gemini
- textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
- machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
- machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
-    plat-$(CONFIG_PLAT_IOP)	   := iop
- machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1)	   := omap1
- machine-$(CONFIG_ARCH_OMAP2)	   := omap2
- machine-$(CONFIG_ARCH_OMAP3)	   := omap2
-    plat-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
-    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)	   := imx
- machine-$(CONFIG_ARCH_H720X)	   := h720x
- machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)	   := at91
- machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
- machine-$(CONFIG_ARCH_NETX)	   := netx
- machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
- machine-$(CONFIG_ARCH_KS8695)     := ks8695
-    plat-$(CONFIG_ARCH_MXC)	   := mxc
- machine-$(CONFIG_ARCH_MX2)	   := mx2
- machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_MX1)	   := mx1
- machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
-    plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM)	   := msm
- machine-$(CONFIG_ARCH_LOKI)       := loki
- machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
+machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		:= gemini
+machine-$(CONFIG_ARCH_H720X)		:= h720x
+machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
+machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
+machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		:= ks8695
+machine-$(CONFIG_ARCH_L7200)		:= l7200
+machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
+machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_MMP)		:= mmp
+machine-$(CONFIG_ARCH_MSM)		:= msm
+machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
+machine-$(CONFIG_ARCH_MX1)		:= mx1
+machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
+machine-$(CONFIG_ARCH_OMAP1)		:= omap1
+machine-$(CONFIG_ARCH_OMAP2)		:= omap2
+machine-$(CONFIG_ARCH_OMAP3)		:= omap2
+machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
+machine-$(CONFIG_ARCH_PXA)		:= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		:= realview
+machine-$(CONFIG_ARCH_RPC)		:= rpc
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100)		:= sa1100
+machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
+machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_W90X900)		:= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+
+# Platform directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)		:= mxc
+plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_ORION)	:= orion
+plat-$(CONFIG_PLAT_PXA)		:= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index fbe5eef1f6c..ce39dc54008 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
 OBJS		+= head-sharpsl.o
 endif
 
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
 ifeq ($(CONFIG_CPU_CP15),y)
 OBJS		+= big-endian.o
 else
@@ -78,6 +78,9 @@ EXTRA_AFLAGS  := -Wa,-march=all
 # linker symbols.  We only define initrd_phys and params_phys if the
 # machine class defined the corresponding makefile variable.
 LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
 ifneq ($(INITRD_PHYS),)
 LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b371fba1b95..01d49be3b2c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,9 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -455,6 +458,9 @@ __armv7_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index a2cd9beaf37..4efbb9df044 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -4,6 +4,14 @@ config ARM_GIC
 config ARM_VIC
 	bool
 
+config ARM_VIC_NR
+	int
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config ICST525
 	bool
 
@@ -27,10 +35,6 @@ config SHARP_LOCOMO
 config SHARP_PARAM
 	bool
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
 config SHARP_SCOOP
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7cb7961d81c..76be7ff2a7c 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 5589444ff43..f37afd9422f 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 }
 EXPORT_SYMBOL(clkdev_alloc);
 
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
+
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	l = clkdev_alloc(r, alias, alias_dev_name);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
+	return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
 /*
  * clkdev_drop - remove a clock dynamically allocated
  */
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index c6884ba1d5e..664c7b8b1ba 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
+static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
 	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
@@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
 	spin_unlock(&irq_controller_lock);
+
+	return 0;
 }
 #endif
 
@@ -253,9 +255,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 }
 
 #ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-	unsigned long map = *cpus_addr(cpumask);
+	unsigned long map = *cpus_addr(*mask);
 
 	/* this always happens on GIC0 */
 	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
deleted file mode 100644
index 140f1d721d5..00000000000
--- a/arch/arm/common/sharpsl_pm.c
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/apm-emulation.h>
-#include <linux/suspend.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
-	int voltage, percent, apm_status, i = 0;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_delayed_work(&toggle_charger, 0);
-
-	while(1) {
-		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-			break;
-		}
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_err(sharpsl_pm.dev, "Charging Error!\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
-	}
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_OFF);
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	sharpsl_pm_led(SHARPSL_LED_ON);
-	sharpsl_pm.machinfo->charge(0);
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	sharpsl_pm.machinfo->charge(1);
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
-   delay until after that has been processed */
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
-	int is_fatal = 0;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i=0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return (ad_val / sharpsl_ad_index);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i=0; i<5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		sharpsl_pm.machinfo->measure_temp(1);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
-		sharpsl_pm.machinfo->measure_temp(0);
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp) {
-		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.machinfo->discharge(1);
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	sharpsl_pm.machinfo->discharge(0);
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < sharpsl_pm.machinfo->charge_on_volt)
-		return -1;
-
-	return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
-	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_scheduled_work();
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if(sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
-		{}
-
-	if (sharpsl_pm.machinfo->earlyresume)
-		sharpsl_pm.machinfo->earlyresume();
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		sharpsl_pm.machinfo->charge(0);
-		udelay(100);
-		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.machinfo->discharge(0);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
-	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
-			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		sharpsl_pm_led(SHARPSL_LED_ON);
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while(1) {
-			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
-	   			sharpsl_pm.full_count++;
-				sharpsl_pm.machinfo->charge(0);
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				sharpsl_pm.machinfo->charge(1);
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while(1) {
-		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-#else
-#define sharpsl_pm_suspend	NULL
-#define sharpsl_pm_resume	NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
-	.enter		= corgi_pxa_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-#endif
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
-	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->init();
-
-	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-	if (ret != 0)
-		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
-	suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
-	suspend_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->exit();
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- 	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index b2a781d9ce0..887c6eb3a18 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+	struct sys_device sysdev;
+
+	void __iomem	*base;
+	int		irq;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+	return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+	return 0;
+}
+
+struct sysdev_class vic_class = {
+	.name		= "vic",
+	.suspend	= vic_class_suspend,
+	.resume		= vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	struct vic_device *dev = vic_devices;
+	int err;
+	int id;
+
+	if (vic_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&vic_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < vic_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &vic_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(irq);
+	unsigned int off = irq & 31;
+
+	if (!v)
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= 1 << off;
+	else
+		v->resume_irqs &= ~(1 << off);
+
+	return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
+	.set_wake = vic_set_wake,
 };
 
 /**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
  * @base: iomem base address
  * @irq_start: starting interrupt number, must be muliple of 32
  * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
  */
 void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources)
+		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
 
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	vic_init2(base);
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 227da0843ea..d18d21bb41e 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Tue Aug 19 11:26:54 2008
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun  4 09:53:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -93,19 +106,13 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y
 # CONFIG_CPU_PXA310 is not set
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
 # CONFIG_MACH_TAVOREVB is not set
@@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
 CONFIG_PXA3xx=y
 # CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -241,6 +252,7 @@ CONFIG_IO_36=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
 CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
@@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,6 +474,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -604,11 +636,17 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 # CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_PXA2XX_AC97 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
 
 #
@@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1460,7 +1616,10 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b5be5..ac18662f38c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
 
 #
 # TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
 # DaVinci Core Type
 #
 CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
 
 #
 # DaVinci Board Type
 #
 CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3f89d5f25bc..3fb083b81b0 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,12 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:24 2006
+# Linux kernel version: 2.6.30-rc3
+# Tue May 19 12:26:49 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
@@ -138,14 +176,24 @@ CONFIG_CRUNCH=y
 #
 # EP93xx Platforms
 #
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
+CONFIG_MACH_EDB93XX=y
+CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9302A=y
+CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
-CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_MICRO9=y
+CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
+CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
 
 #
 # Processor Type
@@ -154,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
@@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
@@ -289,25 +358,15 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -317,20 +376,28 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -339,41 +406,39 @@ CONFIG_IPV6=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_TS7250=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_TS7250 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
 #
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# TPM devices
+# I2C Hardware Bus support
 #
-# CONFIG_TCG_TPM is not set
 
 #
-# I2C support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# I2C Algorithms
+# External I2C/SMBus adapter drivers
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# I2C Hardware Bus support
+# Other I2C/SMBus bus drivers
 #
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
 #
-# CONFIG_W1 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# Hardware Monitoring support
+# PCI GPIO expanders:
 #
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -732,158 +781,188 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index dcf8153a947..0a1abb978d7 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
@@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index f56837f69ca..957fd5fa27c 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 # CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
 # CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 # CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 00000000000..4b04290d8e8
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 00000000000..28be17fbc15
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 00000000000..23e43ea4efa
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,866 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Tue Jun  9 12:36:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 00000000000..213fe9c5eaa
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 5b98f764511..9e2385293ec 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da8cd..eb2cb31825c 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
new file mode 100644
index 00000000000..44461f197a1
--- /dev/null
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -0,0 +1,1141 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 02:44:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+# CONFIG_ARCH_STMP37XX is not set
+CONFIG_ARCH_STMP378X=y
+# CONFIG_MACH_STMP37XX is not set
+CONFIG_MACH_STMP378X=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_KOBJECT=y
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
new file mode 100644
index 00000000000..401279d531d
--- /dev/null
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -0,0 +1,1002 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29.1
+# Mon Apr 20 04:41:26 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+CONFIG_ARCH_STMP37XX=y
+# CONFIG_ARCH_STMP378X is not set
+CONFIG_MACH_STMP37XX=y
+# CONFIG_MACH_STMP378X is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_STMP_DBG is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
new file mode 100644
index 00000000000..2d827e12114
--- /dev/null
+++ b/arch/arm/configs/u300_defconfig
@@ -0,0 +1,1115 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Mon Jun  1 09:18:22 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_U300=y
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# ST-Ericsson AB U300/U330/U335/U365 Platform
+#
+
+#
+# ST-Ericsson Mobile Platform Products
+#
+CONFIG_MACH_U300=y
+
+#
+# ST-Ericsson U300/U330/U335/U365 Feature Selections
+#
+# CONFIG_MACH_U300_BS2X is not set
+# CONFIG_MACH_U300_BS330 is not set
+CONFIG_MACH_U300_BS335=y
+# CONFIG_MACH_U300_BS365 is not set
+# CONFIG_MACH_U300_SINGLE_RAM is not set
+CONFIG_MACH_U300_DUAL_RAM=y
+CONFIG_U300_DEBUG=y
+# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+
+#
+# All the settings below must match the bootloader's settings
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig
index 56bda7c6d67..5245655a0ad 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/w90p910_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8-git8
-# Sat Nov 15 10:05:00 2008
+# Linux kernel version: 2.6.30
+# Wed Jun 10 22:09:25 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -56,52 +63,53 @@ CONFIG_USER_NS=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_CPU_W90P910=y
 
 #
@@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M"
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
@@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 
@@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_W90X900=y
-# CONFIG_SERIAL_W90X900_PORT1 is not set
-# CONFIG_SERIAL_W90X900_PORT2 is not set
-# CONFIG_SERIAL_W90X900_PORT3 is not set
-# CONFIG_SERIAL_W90X900_PORT4 is not set
-CONFIG_SERIAL_W90X900_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
@@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 6116e4893c0..15f8a092b70 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -114,3 +114,16 @@
 	.align	3;				\
 	.long	9999b,9001f;			\
 	.previous
+
+/*
+ * SMP data memory barrier
+ */
+	.macro	smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+	dmb
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#endif
+#endif
+	.endm
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index ee99723b3a6..9e07fe50702 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
 	: "cc");
 }
 
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
 	int result;
 
+	smp_mb();
+
 	__asm__ __volatile__("@ atomic_add_return\n"
 "1:	ldrex	%0, [%2]\n"
 "	add	%0, %0, %3\n"
@@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
+	smp_mb();
+
 	return result;
 }
 
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
 	int result;
 
+	smp_mb();
+
 	__asm__ __volatile__("@ atomic_sub_return\n"
 "1:	ldrex	%0, [%2]\n"
 "	sub	%0, %0, %3\n"
@@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
+	smp_mb();
+
 	return result;
 }
 
@@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 {
 	unsigned long oldval, res;
 
+	smp_mb();
+
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
 		"ldrex	%1, [%2]\n"
@@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 		    : "cc");
 	} while (res);
 
+	smp_mb();
+
 	return oldval;
 }
 
@@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 
 	return val;
 }
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
 
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
@@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 	return val;
 }
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
 
 static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
@@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 }
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i, v)	(void) atomic_add_return(i, v)
-#define atomic_inc(v)		(void) atomic_add_return(1, v)
-#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
-#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+#define atomic_inc(v)		atomic_add(1, v)
+#define atomic_dec(v)		atomic_sub(1, v)
 
 #define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
 #define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
@@ -200,12 +244,11 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
 
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif
 #endif
diff --git a/arch/arm/include/asm/bitsperlong.h b/arch/arm/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/arm/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index cb7a9e97fd7..feaa75f0013 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -7,4 +7,20 @@
 #define L1_CACHE_SHIFT		5
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index bb7d695f390..1a711ea8418 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -429,6 +429,14 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 		__flush_anon_page(vma, page, vmaddr);
 }
 
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	/* highmem pages are always flushed upon kunmap already */
+	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
+		__cpuc_flush_dcache_page(page_address(page));
+}
+
 #define flush_dcache_mmap_lock(mapping) \
 	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 7b9d27e749b..b3e656c6fb7 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,21 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
+#define CPUID_EXT_PFR0	"c1, 0"
+#define CPUID_EXT_PFR1	"c1, 1"
+#define CPUID_EXT_DFR0	"c1, 2"
+#define CPUID_EXT_AFR0	"c1, 3"
+#define CPUID_EXT_MMFR0	"c1, 4"
+#define CPUID_EXT_MMFR1	"c1, 5"
+#define CPUID_EXT_MMFR2	"c1, 6"
+#define CPUID_EXT_MMFR3	"c1, 7"
+#define CPUID_EXT_ISAR0	"c2, 0"
+#define CPUID_EXT_ISAR1	"c2, 1"
+#define CPUID_EXT_ISAR2	"c2, 2"
+#define CPUID_EXT_ISAR3	"c2, 3"
+#define CPUID_EXT_ISAR4	"c2, 4"
+#define CPUID_EXT_ISAR5	"c2, 5"
+
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
 	({								\
@@ -18,9 +33,19 @@
 		    : "cc");						\
 		__val;							\
 	})
+#define read_cpuid_ext(ext_reg)						\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, " ext_reg		\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
 #else
 extern unsigned int processor_id;
 #define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
 #endif
 
 /*
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index 1d77e51907f..59426a4595c 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -5,9 +5,6 @@
 #ifndef __ARM_FLAT_H__
 #define __ARM_FLAT_H__
 
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
deleted file mode 100644
index e521b70713c..00000000000
--- a/arch/arm/include/asm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 64f2252a25c..cdb9022716f 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -24,6 +24,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
+#define L2X0_TAG_LATENCY_CTRL		0x108
+#define L2X0_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 4924914af18..7f34333bb54 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,7 +36,7 @@
 void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
 void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
new file mode 100644
index 00000000000..6a6c66be7f6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -0,0 +1,138 @@
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS			(0x00)
+#define PL080_TC_STATUS				(0x04)
+#define PL080_TC_CLEAR				(0x08)
+#define PL080_ERR_STATUS			(0x0C)
+#define PL080_ERR_CLEAR				(0x10)
+#define PL080_RAW_TC_STATUS			(0x14)
+#define PL080_RAW_ERR_STATUS			(0x18)
+#define PL080_EN_CHAN				(0x1c)
+#define PL080_SOFT_BREQ				(0x20)
+#define PL080_SOFT_SREQ				(0x24)
+#define PL080_SOFT_LBREQ			(0x28)
+#define PL080_SOFT_LSREQ			(0x2C)
+
+#define PL080_CONFIG				(0x30)
+#define PL080_CONFIG_M2_BE			(1 << 2)
+#define PL080_CONFIG_M1_BE			(1 << 1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_SYNC				(0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR			(0x00)
+#define PL080_CH_DST_ADDR			(0x04)
+#define PL080_CH_LLI				(0x08)
+#define PL080_CH_CONTROL			(0x0C)
+#define PL080_CH_CONFIG				(0x10)
+#define PL080S_CH_CONTROL2			(0x10)
+#define PL080S_CH_CONFIG			(0x14)
+
+#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT			(2)
+#define PL080_LLI_LM_AHB2			(1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_SYS			(1 << 28)
+#define PL080_CONTROL_DST_INCR			(1 << 27)
+#define PL080_CONTROL_SRC_INCR			(1 << 26)
+#define PL080_CONTROL_DST_AHB2			(1 << 25)
+#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT		(21)
+#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT		(18)
+#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
+#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
+
+#define PL080_BSIZE_1				(0x0)
+#define PL080_BSIZE_4				(0x1)
+#define PL080_BSIZE_8				(0x2)
+#define PL080_BSIZE_16				(0x3)
+#define PL080_BSIZE_32				(0x4)
+#define PL080_BSIZE_64				(0x5)
+#define PL080_BSIZE_128				(0x6)
+#define PL080_BSIZE_256				(0x7)
+
+#define PL080_WIDTH_8BIT			(0x0)
+#define PL080_WIDTH_16BIT			(0x1)
+#define PL080_WIDTH_32BIT			(0x2)
+
+#define PL080_CONFIG_HALT			(1 << 18)
+#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
+#define PL080_CONFIG_LOCK			(1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
+#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT		(6)
+#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_FLOW_MEM2MEM			(0x0)
+#define PL080_FLOW_MEM2PER			(0x1)
+#define PL080_FLOW_PER2MEM			(0x2)
+#define PL080_FLOW_SRC2DST			(0x3)
+#define PL080_FLOW_SRC2DST_DST			(0x4)
+#define PL080_FLOW_MEM2PER_PER			(0x5)
+#define PL080_FLOW_PER2MEM_PER			(0x6)
+#define PL080_FLOW_SRC2DST_SRC			(0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+};
+
+struct pl080s_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+	u32	control1;
+};
+
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f87328d4a18..5d72550a809 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,7 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
new file mode 100644
index 00000000000..50c7e7cfd67
--- /dev/null
+++ b/arch/arm/include/asm/localtimer.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/include/asm/localtimer.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack()	twd_timer_ack()
+#define local_timer_stop()	twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f38e6..742c2aaeb02 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
 #endif
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index 54570d2e95b..fc26976d8e3 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ARM_MMAN_H__
 #define __ARM_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index e6eb8a67b80..be962c1349c 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c5461..1cd2d6416bd 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 	return __va(ptr);
 }
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 1845892260e..6a89567ffc5 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -71,6 +71,7 @@ struct thread_struct {
 		regs->ARM_cpsr = USR26_MODE;				\
 	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
 		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
 	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 236a06b9b7c..67b833c9b6b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -50,6 +50,7 @@
 #define PSR_F_BIT	0x00000040
 #define PSR_I_BIT	0x00000080
 #define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
 #define PSR_J_BIT	0x01000000
 #define PSR_Q_BIT	0x08000000
 #define PSR_V_BIT	0x10000000
@@ -65,6 +66,22 @@
 #define PSR_x		0x0000ff00	/* Extension		*/
 #define PSR_c		0x000000ff	/* Control		*/
 
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h
index d0fb487aba4..43ba0fb1c8a 100644
--- a/arch/arm/include/asm/signal.h
+++ b/arch/arm/include/asm/signal.h
@@ -111,7 +111,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index ada93a8fc2e..4fc1565e4f9 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -29,6 +29,7 @@
 #define SZ_512				0x00000200
 
 #define SZ_1K                           0x00000400
+#define SZ_2K                           0x00000800
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index fad70da5911..a06e735b262 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p);
 asmlinkage void do_IPI(struct pt_regs *regs);
 
 /*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
  */
 extern void smp_init_cpus(void);
 
@@ -53,17 +53,7 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
-
-/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_cross_call(const struct cpumask *mask);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -102,46 +92,12 @@ extern int platform_cpu_kill(unsigned int cpu);
 extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * show local interrupt info
  */
 extern void show_local_irqs(struct seq_file *);
 
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
new file mode 100644
index 00000000000..2376835015d
--- /dev/null
+++ b/arch/arm/include/asm/smp_scu.h
@@ -0,0 +1,7 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
new file mode 100644
index 00000000000..7be0978b262
--- /dev/null
+++ b/arch/arm/include/asm/smp_twd.h
@@ -0,0 +1,12 @@
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
deleted file mode 100644
index cf0d0bdee74..00000000000
--- a/arch/arm/include/asm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASMARM_SUSPEND_H
-#define _ASMARM_SUSPEND_H
-
-#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index bd4dc8ed53d..d65b2f5bf41 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	unsigned int tmp;
 #endif
 
+	smp_mb();
+
 	switch (size) {
 #if __LINUX_ARM_ARCH__ >= 6
 	case 1:
@@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 		__bad_xchg(ptr, size), ret = 0;
 		break;
 	}
+	smp_mb();
 
 	return ret;
 }
@@ -316,6 +319,12 @@ extern void enable_hlt(void);
 
 #include <asm-generic/cmpxchg-local.h>
 
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
 /*
  * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
  * them available.
@@ -329,6 +338,173 @@ extern void enable_hlt(void);
 #include <asm-generic/cmpxchg.h>
 #endif
 
+#else	/* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long oldval, res;
+
+	switch (size) {
+#ifdef CONFIG_CPU_32v6K
+	case 1:
+		do {
+			asm volatile("@ __cmpxchg1\n"
+			"	ldrexb	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexbeq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+	case 2:
+		do {
+			asm volatile("@ __cmpxchg1\n"
+			"	ldrexh	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexheq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+#endif /* CONFIG_CPU_32v6K */
+	case 4:
+		do {
+			asm volatile("@ __cmpxchg4\n"
+			"	ldrex	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexeq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+	default:
+		__bad_cmpxchg(ptr, size);
+		oldval = 0;
+	}
+
+	return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+					 unsigned long new, int size)
+{
+	unsigned long ret;
+
+	smp_mb();
+	ret = __cmpxchg(ptr, old, new, size);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_mb((ptr),			\
+					  (unsigned long)(o),		\
+					  (unsigned long)(n),		\
+					  sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long ret;
+
+	switch (size) {
+#ifndef CONFIG_CPU_32v6K
+	case 1:
+	case 2:
+		ret = __cmpxchg_local_generic(ptr, old, new, size);
+		break;
+#endif	/* !CONFIG_CPU_32v6K */
+	default:
+		ret = __cmpxchg(ptr, old, new, size);
+	}
+
+	return ret;
+}
+
+#define cmpxchg_local(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr),			\
+				       (unsigned long)(o),		\
+				       (unsigned long)(n),		\
+				       sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	register unsigned long long oldval asm("r0");
+	register unsigned long long __old asm("r2") = old;
+	register unsigned long long __new asm("r4") = new;
+	unsigned long res;
+
+	do {
+		asm volatile(
+		"	@ __cmpxchg8\n"
+		"	ldrexd	%1, %H1, [%2]\n"
+		"	mov	%0, #0\n"
+		"	teq	%1, %3\n"
+		"	teqeq	%H1, %H3\n"
+		"	strexdeq %0, %4, %H4, [%2]\n"
+			: "=&r" (res), "=&r" (oldval)
+			: "r" (ptr), "Ir" (__old), "r" (__new)
+			: "memory", "cc");
+	} while (res);
+
+	return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+						unsigned long long old,
+						unsigned long long new)
+{
+	unsigned long long ret;
+
+	smp_mb();
+	ret = __cmpxchg64(ptr, old, new);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg64(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
+					    (unsigned long long)(o),	\
+					    (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n)					\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
+					 (unsigned long long)(o),	\
+					 (unsigned long long)(n)))
+
+#else	/* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif	/* CONFIG_CPU_32v6K */
+
+#endif	/* __LINUX_ARM_ARCH__ >= 6 */
+
 #endif /* __ASSEMBLY__ */
 
 #define arch_align_stack(x) (x)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a62218013c7..c964f3fc3bc 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -40,6 +40,12 @@
 #define TLB_V6_I_ASID	(1 << 18)
 
 #define TLB_BTB		(1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE	(1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -176,9 +182,17 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
+#ifdef CONFIG_SMP
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#else
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+#endif
+
 #ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v6wbi_tlb_flags
-# define v7wbi_always_flags	v6wbi_tlb_flags
+# define v7wbi_possible_flags	v7wbi_tlb_flags
+# define v7wbi_always_flags	v7wbi_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
@@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void)
 		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V7_UIS_FULL))
+		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V7_UIS_ASID))
+		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7897464e0c2..0da9bc9b3b1 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -386,7 +386,9 @@ do {									\
 #ifdef CONFIG_MMU
 extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
 extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
 #else
 #define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
 #define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 11a5197a221..ff89d0b3abc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index d4a0da1e48f..950391f194c 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+	/*
+	 * If we have support for OABI programs, we can never allow NX
+	 * support - our signal syscall restart mechanism relies upon
+	 * being able to execute code placed on the user stack.
+	 */
+	return 1;
+#else
 	return 0;
+#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d662a2f1fd8..fc8af43c500 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -482,6 +482,9 @@ __und_usr:
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r0, r0				@ little endian instruction
+#endif
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
@@ -815,10 +818,7 @@ __kuser_helper_start:
  */
 
 __kuser_memory_barrier:				@ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 	usr_ret	lr
 
 	.align	5
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b55cb033180..366e5097a41 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -210,6 +210,9 @@ ENTRY(vector_swi)
   A710(	teq	ip, #0x0f000000						)
   A710(	bne	.Larm710bug						)
 #endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	rev	r10, r10			@ little endian instruction
+#endif
 
 #elif defined(CONFIG_AEABI)
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3265a2e7cd..1585423699e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)do_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 80b8b5c7e07..442b87476f9 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 		 */
 		thumb = handler & 1;
 
-		if (thumb)
+		if (thumb) {
 			cpsr |= PSR_T_BIT;
-		else
+#if __LINUX_ARM_ARCH__ >= 7
+			/* clear the If-Then Thumb-2 execution state */
+			cpsr &= ~PSR_IT_MASK;
+#endif
+		} else
 			cpsr &= ~PSR_T_BIT;
 	}
 #endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 7801aac3c04..de885fd256c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -22,16 +22,20 @@
 #include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/cputype.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
+#include <asm/localtimer.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void)
 	 * Take this CPU offline.  Once we clear this, we can't return,
 	 * and we must not schedule until we're ready to give up the cpu.
 	 */
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	/*
 	 * OK - migrate IRQs away from this CPU
@@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	local_fiq_enable();
 
 	/*
-	 * Setup local timer for this CPU.
+	 * Setup the percpu timer for this CPU.
 	 */
-	local_timer_setup();
+	percpu_timer_setup();
 
 	calibrate_delay();
 
@@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * OK, now it's safe to let the boot CPU continue
 	 */
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 
 	/*
 	 * OK, it's off to the idle thread for us
@@ -326,14 +330,14 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
 	unsigned long flags;
 	unsigned int cpu;
 
 	local_irq_save(flags);
 
-	for_each_cpu_mask(cpu, callmap) {
+	for_each_cpu(cpu, mask) {
 		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 
 		spin_lock(&ipi->lock);
@@ -344,19 +348,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(callmap);
+	smp_cross_call(mask);
 
 	local_irq_restore(flags);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 void show_ipi_list(struct seq_file *p)
@@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
 static void ipi_timer(void)
 {
+	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
 	irq_enter();
-	local_timer_interrupt();
+	evt->event_handler(evt);
 	irq_exit();
 }
 
@@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+	send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+	evt->name	= "dummy_timer";
+	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
+			  CLOCK_EVT_FEAT_PERIODIC |
+			  CLOCK_EVT_FEAT_DUMMY;
+	evt->rating	= 400;
+	evt->mult	= 1;
+	evt->set_mode	= broadcast_timer_set_mode;
+	evt->broadcast	= smp_timer_broadcast;
+
+	clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+	evt->cpumask = cpumask_of(cpu);
+
+	local_timer_setup(evt);
+}
+
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu)
 	dump_stack();
 	spin_unlock(&stop_lock);
 
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	local_fiq_disable();
 	local_irq_disable();
@@ -498,26 +544,14 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
-}
-
-void smp_send_timer(void)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
-{
-	send_ipi_message(mask, IPI_TIMER);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
 void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_CPU_STOP);
+	send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
@@ -528,20 +562,17 @@ int setup_profiling_timer(unsigned int multiplier)
 	return -EINVAL;
 }
 
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+		const struct cpumask *mask)
 {
-	int ret = 0;
-
 	preempt_disable();
 
-	ret = smp_call_function_mask(mask, func, info, wait);
-	if (cpu_isset(smp_processor_id(), mask))
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
 		func(info);
 
 	preempt_enable();
-
-	return ret;
 }
 
 /**********************************************************************/
@@ -555,6 +586,12 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
@@ -597,55 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	else
+		local_flush_tlb_all();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t mask = mm->cpu_vm_mask;
-
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	else
+		local_flush_tlb_mm(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = uaddr;
-
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = uaddr;
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_page(vma, uaddr);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = kaddr;
-
-	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = kaddr;
+		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	} else
+		local_flush_tlb_kernel_page(kaddr);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_range(vma, start, end);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	} else
+		local_flush_tlb_kernel_range(start, end);
 }
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
new file mode 100644
index 00000000000..d3831f616ee
--- /dev/null
+++ b/arch/arm/kernel/smp_scu.c
@@ -0,0 +1,48 @@
+/*
+ *  linux/arch/arm/kernel/smp_scu.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+	u32 scu_ctrl;
+
+	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl |= 1;
+	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+	/*
+	 * Ensure that the data accessed by CPU0 before the SCU was
+	 * initialised is visible to the other CPUs.
+	 */
+	flush_cache_all();
+}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
new file mode 100644
index 00000000000..d8c88c633c6
--- /dev/null
+++ b/arch/arm/kernel/smp_twd.c
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/kernel/smp_twd.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+			struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* timer load already set up */
+		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+			| TWD_TIMER_CONTROL_PERIODIC;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+			struct clock_event_device *unused)
+{
+	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+	ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+	return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+	unsigned long load, count;
+	u64 waitjiffies;
+
+	/*
+	 * If this is the first time round, we need to work out how fast
+	 * the timer ticks
+	 */
+	if (twd_timer_rate == 0) {
+		printk(KERN_INFO "Calibrating local timer... ");
+
+		/* Wait for a tick to start */
+		waitjiffies = get_jiffies_64() + 1;
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		/* OK, now the tick has started, let's get the timer going */
+		waitjiffies += 5;
+
+				 /* enable, no interrupt or reload */
+		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+				 /* maximum value */
+		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+			(twd_timer_rate / 100000) % 100);
+	}
+
+	load = twd_timer_rate / HZ;
+
+	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+	unsigned long flags;
+
+	twd_calibrate_rate();
+
+	clk->name = "local_timer";
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->rating = 350;
+	clk->set_mode = twd_set_mode;
+	clk->set_next_event = twd_set_next_event;
+	clk->shift = 20;
+	clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+	/* Make sure our local interrupt controller has this enabled */
+	local_irq_save(flags);
+	get_irq_chip(clk->irq)->unmask(clk->irq);
+	local_irq_restore(flags);
+
+	clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index c90f27250ea..6c077979254 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -141,6 +141,7 @@ SECTIONS
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
+		_sdata = .;
 
 		/*
 		 * first, the init task union, aligned
@@ -192,6 +193,7 @@ SECTIONS
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
 		*(COMMON)
+		__bss_stop = .;
 		_end = .;
 	}
 					/* Stabs debugging sections.	*/
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 866f84a586f..030ba7219f4 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,6 +29,9 @@ else
 endif
 endif
 
+# using lib_ here won't override already available weak symbols
+obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
+
 lib-$(CONFIG_MMU) += $(mmu-y)
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 2e787d40d59..c7f2627385e 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -18,12 +18,14 @@
 	mov	r2, #1
 	add	r1, r1, r0, lsr #3	@ Get byte offset
 	mov	r3, r2, lsl r3		@ create mask
+	smp_dmb
 1:	ldrexb	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
 	\instr	r2, r2, r3			@ toggle bit
 	strexb	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
+	smp_dmb
 	cmp	r0, #0
 	movne	r0, #1
 2:	mov	pc, lr
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 4d6bc71231f..844f56785eb 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -18,7 +18,8 @@
  *          : sz   - number of bytes to clear
  * Returns  : number of bytes NOT cleared
  */
-ENTRY(__clear_user)
+ENTRY(__clear_user_std)
+WEAK(__clear_user)
 		stmfd	sp!, {r1, lr}
 		mov	r2, #0
 		cmp	r1, #4
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 22f968bbdff..878820f0a32 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -86,7 +86,8 @@
 
 	.text
 
-ENTRY(__copy_to_user)
+ENTRY(__copy_to_user_std)
+WEAK(__copy_to_user)
 
 #include "copy_template.S"
 
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
new file mode 100644
index 00000000000..6b967ffb655
--- /dev/null
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -0,0 +1,228 @@
+/*
+ *  linux/arch/arm/lib/uaccess_with_memcpy.c
+ *
+ *  Written by: Lennert Buytenhek and Nicolas Pitre
+ *  Copyright (C) 2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h> /* for in_atomic() */
+#include <asm/current.h>
+#include <asm/page.h>
+
+static int
+pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
+{
+	unsigned long addr = (unsigned long)_addr;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	pgd = pgd_offset(current->mm, addr);
+	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
+		return 0;
+
+	pmd = pmd_offset(pgd, addr);
+	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+		return 0;
+
+	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
+	    !pte_write(*pte) || !pte_dirty(*pte))) {
+		pte_unmap_unlock(pte, ptl);
+		return 0;
+	}
+
+	*ptep = pte;
+	*ptlp = ptl;
+
+	return 1;
+}
+
+static unsigned long noinline
+__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
+{
+	int atomic;
+
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memcpy((void *)to, from, n);
+		return 0;
+	}
+
+	/* the mmap semaphore is taken only if not in an atomic context */
+	atomic = in_atomic();
+
+	if (!atomic)
+		down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(to, &pte, &ptl)) {
+			if (!atomic)
+				up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)to))
+				goto out;
+			if (!atomic)
+				down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memcpy((void *)to, from, tocopy);
+		to += tocopy;
+		from += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	if (!atomic)
+		up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	/*
+	 * This test is stubbed out of the main function above to keep
+	 * the overhead for small copies low by avoiding a large
+	 * register dump on the stack just to reload them right away.
+	 * With frame pointer disabled, tail call optimization kicks in
+	 * as well making this test almost invisible.
+	 */
+	if (n < 64)
+		return __copy_to_user_std(to, from, n);
+	return __copy_to_user_memcpy(to, from, n);
+}
+	
+static unsigned long noinline
+__clear_user_memset(void __user *addr, unsigned long n)
+{
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memset((void *)addr, 0, n);
+		return 0;
+	}
+
+	down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(addr, &pte, &ptl)) {
+			up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)addr))
+				goto out;
+			down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memset((void *)addr, 0, tocopy);
+		addr += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long __clear_user(void __user *addr, unsigned long n)
+{
+	/* See rational for this in __copy_to_user() above. */
+	if (n < 64)
+		return __clear_user_std(addr, n);
+	return __clear_user_memset(addr, n);
+}
+
+#if 0
+
+/*
+ * This code is disabled by default, but kept around in case the chosen
+ * thresholds need to be revalidated.  Some overhead (small but still)
+ * would be implied by a runtime determined variable threshold, and
+ * so far the measurement on concerned targets didn't show a worthwhile
+ * variation.
+ *
+ * Note that a fairly precise sched_clock() implementation is needed
+ * for results to make some sense.
+ */
+
+#include <linux/vmalloc.h>
+
+static int __init test_size_treshold(void)
+{
+	struct page *src_page, *dst_page;
+	void *user_ptr, *kernel_ptr;
+	unsigned long long t0, t1, t2;
+	int size, ret;
+
+	ret = -ENOMEM;
+	src_page = alloc_page(GFP_KERNEL);
+	if (!src_page)
+		goto no_src;
+	dst_page = alloc_page(GFP_KERNEL);
+	if (!dst_page)
+		goto no_dst;
+	kernel_ptr = page_address(src_page);
+	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+	if (!user_ptr)
+		goto no_vmap;
+
+	/* warm up the src page dcache */
+	ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE);
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size);
+		t1 = sched_clock();
+		ret |= __copy_to_user_std(user_ptr, kernel_ptr, size);
+		t2 = sched_clock();
+		printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __clear_user_memset(user_ptr, size);
+		t1 = sched_clock();
+		ret |= __clear_user_std(user_ptr, size);
+		t2 = sched_clock();
+		printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	if (ret)
+		ret = -EFAULT;
+
+	vunmap(user_ptr);
+no_vmap:
+	put_page(dst_page);
+no_dst:
+	put_page(src_page);
+no_src:
+	return ret;
+}
+
+subsys_initcall(test_size_treshold);
+
+#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index e263fda3e2d..970fd6b6753 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.det_pin 	= AT91_PIN_PC9,
+	.wp_pin 	= AT91_PIN_PC4,
 	.slot_b		= 1,
 	.wire4		= 1,
 };
@@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
 
 static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
 		I2C_BOARD_INFO("fm3130", 0x68),
 	}, {
 		I2C_BOARD_INFO("24c64", 0x50),
@@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
+	/* Audio */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 438efbb1748..cc270beadd5 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -235,7 +242,7 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* PCK0 provides MCLK to the WM8731 */
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e4345106ee5..bac578fe0d3 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
 #define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
 
 
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi()		(  cpu_is_at91cap9() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+
+#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+
+#define cpu_has_upll()		(0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp()		(!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
+
+
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
 
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
 };
 static struct clk uhpck = {
 	.name		= "uhpck",
-	.parent		= &pllb,
+	/*.parent		= ... we choose parent at runtime */
 	.mode		= pmc_sys_mode,
 };
 
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 		case AT91_PMC_CSS_PLLA:
 			return &plla;
 		case AT91_PMC_CSS_PLLB:
-			return &pllb;
+			if (cpu_has_upll())
+				/* CSS_PLLB == CSS_UPLL */
+				return &utmi_clk;
+			else if (cpu_has_pllb())
+				return &pllb;
 	}
 
 	return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 			u32	pckr;
 
 			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS_PLLB;	/* clock selection */
+			pckr &= AT91_PMC_CSS;	/* clock selection */
 			pckr |= prescale << 2;
 			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
 static void __init init_programmable_clock(struct clk *clk)
 {
 	struct clk	*parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-	if (!cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
 		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_utmi())
 		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+	if (cpu_has_upll())
+		seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
 	seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
 	&clk32k,
 	&main_clk,
 	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
 
 	/* MCK */
 	&mck
 };
 
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	uhpck.parent = &pllb;
+
+	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+	if (cpu_is_at91rm9200()) {
+		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+		udpck.pmc_mask = AT91RM9200_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+	} else if (cpu_is_at91cap9()) {
+		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+	}
+	at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init: choose 480 MHz from UPLL,
+	 */
+	unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+	/* Setup divider by 10 to reach 48 MHz */
+	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+	at91_sys_write(AT91_PMC_USB, usbr);
+
+	/* Now set uhpck values */
+	uhpck.parent = &utmi_clk;
+	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
 int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
-	   || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	if (cpu_is_at91rm9200()) {
-		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	} else if (cpu_is_at91cap9()) {
-		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+	if (cpu_has_upll() && !cpu_has_pllb()) {
+		/* setup UTMI clock as the fourth primary clock
+		 * (instead of pllb) */
+		utmi_clk.type |= CLK_TYPE_PRIMARY;
+		utmi_clk.id = 3;
 	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
-	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
 	/*
 	 * USB HS clock init
 	 */
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+	if (cpu_has_utmi())
 		/*
 		 * multiplier is hard-wired to 40
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-	}
+
+	/*
+	 * USB FS clock init
+	 */
+	if (cpu_has_pllb())
+		at91_pllb_usbfs_clock_init(main_clock);
+	if (cpu_has_upll())
+		/* assumes that we choose UPLL for USB and not PLLA */
+		at91_upll_usbfs_clock_init(main_clock);
 
 	/*
 	 * MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
-	if (cpu_is_at91rm9200())
+	if (cpu_is_at91rm9200()) {
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	else if (cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9g20()) {
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
-	} else
+	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+	}
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
+		list_add_tail(&pllb.node, &clocks);
+
+	if (cpu_has_uhp())
+		list_add_tail(&uhpck.node, &clocks);
+
+	if (cpu_has_udpfs())
+		list_add_tail(&udpck.node, &clocks);
+
+	if (cpu_has_utmi())
 		list_add_tail(&utmi_clk.node, &clocks);
 
 	/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33b8a9..64589eaaaee 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [AT91CAP9 revC only] */
+#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [CAP9 revC & some SAM9 only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
 #define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9, CAP9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
@@ -72,6 +72,7 @@
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
 #define			AT91_PMC_PRES_1			(0 << 2)
 #define			AT91_PMC_PRES_2			(1 << 2)
@@ -88,12 +89,25 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)
 #define			AT91_PMC_PDIV_2			(1 << 12)
+#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
+#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
+#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
 
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+#define	AT91_PMC_USB		(AT91_PMC + 0x38)	/* USB Clock Register [some SAM9 only] */
+#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
+#define			AT91_PMC_USBS_PLLA		(0 << 0)
+#define			AT91_PMC_USBS_UPLL		(1 << 0)
+#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
+#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
+#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
 
 #define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
 #define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
@@ -102,7 +116,7 @@
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9, AT91CAP9 only] */
 #define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc72b8..be747f5c6cd 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
 if ARCH_DAVINCI
 
+config AINTC
+	bool
+
+config CP_INTC
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM355
+        bool "DaVinci 355 based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM646x
+        bool "DaVinci 646x based system"
+	select AINTC
 
 comment "DaVinci Board Type"
 
@@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
 
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+	bool "TI DM355 EVM"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+	bool "DM355 Leopard board"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+	bool "TI DM6467 EVM"
+	depends on ARCH_DAVINCI_DM646x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM6467 EVM
+
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661942f..059ab78084b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
 #
 
 # Common objects
-obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o devices.o dma.o usb.o
+obj-y 			:= time.o clock.o serial.o io.o psc.o \
+			   gpio.o devices.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+
+obj-$(CONFIG_AINTC)			+= irq.o
+obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 00000000000..5ac2f565d86
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+		.platform_data = dm355evm_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355evm_msp");
+	gpio_direction_input(5);
+	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355evm_i2c_info,
+			ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04014000,
+		.end	= 0x04014001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04014002,
+		.end	= 0x04014003,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355evm_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355evm_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+	&dm355evm_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+	.get_cd		= dm355evm_mmc_get_cd,
+	.get_ro		= dm355evm_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_evm_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(1, "dm9000");
+	gpio_direction_input(1);
+	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_evm_devices,
+			     ARRAY_SIZE(davinci_evm_devices));
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355evm_mmc_config);
+	davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+			ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_evm_map_io,
+	.init_irq     = dm355_evm_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 00000000000..28c9008df4f
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+		.platform_data = dm355leopard_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355leopard_msp");
+	gpio_direction_input(5);
+	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355leopard_i2c_info,
+			ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04000000,
+		.end	= 0x04000001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04000016,
+		.end	= 0x04000017,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355leopard_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+	&dm355leopard_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+	.get_cd		= dm355leopard_mmc_get_cd,
+	.get_ro		= dm355leopard_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_leopard_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(9, "dm9000");
+	gpio_direction_input(9);
+	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_leopard_devices,
+			     ARRAY_SIZE(davinci_leopard_devices));
+	leopard_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355leopard_mmc_config);
+	davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+			ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_leopard_map_io,
+	.init_irq     = dm355_leopard_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c63bc..d9d40450bdc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
-#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
 #include <mach/mux.h>
 #include <mach/psc.h>
 #include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
-	DECLARE_MAC_BUF(mac_str);
-	char mac_addr[6];
-
-	at24_mem_acc = mem_acc;
-
-	/* Read MAC addr from EEPROM */
-	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
-		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
-		       print_mac(mac_str, mac_addr));
-	}
-}
 
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
-	.setup          = at24_setup,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
 };
 
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
 /*
  * MSP430 supports RTC, card detection, input from IR remote, and
  * a bit more.  It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void)
 	return (buf[3] << 8) | buf[2];
 }
 
+static int dm6444evm_mmc_get_cd(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+	.get_cd		= dm6444evm_mmc_get_cd,
+	.get_ro		= dm6444evm_mmc_get_ro,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
-	davinci_map_common_io();
 	dm644x_init();
 }
 
@@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 static __init void davinci_evm_init(void)
 {
 	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -671,8 +664,13 @@ static __init void davinci_evm_init(void)
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
 
+	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
 	davinci_serial_init(&uart_config);
 
+	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
 	/* Register the fixup for PHY on DaVinci */
 	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 					davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 00000000000..e17de635262
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK		(0x2)
+#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+	{ .name = "DS1", .active_low = 1, },
+	{ .name = "DS2", .active_low = 1, },
+	{ .name = "DS3", .active_low = 1, },
+	{ .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+	.num_leds = ARRAY_SIZE(evm_leds),
+	.leds     = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	struct gpio_led *leds = evm_leds;
+	int status;
+
+	while (ngpio--) {
+		leds->gpio = gpio++;
+		leds++;
+	};
+
+	evm_led_dev = platform_device_alloc("leds-gpio", 0);
+	platform_device_add_data(evm_led_dev, &evm_led_data,
+				sizeof(evm_led_data));
+
+	evm_led_dev->dev.parent = &client->dev;
+	status = platform_device_add(evm_led_dev);
+	if (status < 0) {
+		platform_device_put(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+				unsigned ngpio, void *c)
+{
+	if (evm_led_dev) {
+		platform_device_unregister(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int status;
+	int i;
+	char label[10];
+
+	for (i = 0; i < 4; ++i) {
+		snprintf(label, 10, "user_sw%d", i);
+		status = gpio_request(gpio, label);
+		if (status)
+			goto out_free;
+		evm_sw_gpio[i] = gpio++;
+
+		status = gpio_direction_input(evm_sw_gpio[i]);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+
+		status = gpio_export(evm_sw_gpio[i], 0);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+	}
+	return status;
+out_free:
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int i;
+
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_unexport(evm_sw_gpio[i]);
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	int status;
+
+	if (ngpio < 8)
+		return -EINVAL;
+
+	status = evm_sw_setup(client, gpio, 4, c);
+	if (status)
+		return status;
+
+	return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	BUG_ON(ngpio < 8);
+
+	evm_sw_teardown(client, gpio, 4, c);
+	evm_led_teardown(client, gpio+4, 4, c);
+
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+	.gpio_base	= DAVINCI_N_GPIO+1,
+	.setup		= evm_pcf_setup,
+	.teardown	= evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ *  - 0x7f00, 6 bytes Ethernet Address
+ *  - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data  = &eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &pcf_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq       = 100 /* kHz */,
+	.bus_delay      = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+	dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io       = davinci_map_io,
+	.init_irq     = davinci_dm646x_evm_irq_init,
+	.timer        = &davinci_timer,
+	.init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 00000000000..748a8e48541
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK		(0x2)
+#define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+	/* U-Boot Environment: Block 0
+	 * UBL:                Block 1
+	 * U-Boot:             Blocks 6-7 (256 kb)
+	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
+	 * Integrity Data:     Blocks 100-END
+	 */
+	{
+		.name		= "Linux Kernel",
+		.offset		= 32 * SZ_128K,
+		.size		= 16 * SZ_128K, /* 2 Mb */
+		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
+	},
+	{
+		.name		= "Linux ROOT",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * SZ_128K, /* 32 Mb */
+		.mask_flags	= 0, /* R/W */
+	},
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+	.parts		= davinci_sffsdr_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+	.name		= "davinci_nand", /* Name of driver */
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_sffsdr_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+	.resource	= davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+	.phy_mask	= SFFSDR_PHY_MASK,
+	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len	= (64*1024) / 8,
+	.page_size	= 32,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24lc64", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+	/* Other I2C devices:
+	 * MSP430,  addr 0x23 (not used)
+	 * PCA9543, addr 0x70 (setup done by U-Boot)
+	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+	 */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+	&davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+	dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	platform_add_devices(davinci_sffsdr_devices,
+			     ARRAY_SIZE(davinci_sffsdr_devices));
+	sffsdr_init_i2c();
+	davinci_serial_init(&uart_config);
+	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+	setup_usb(0, 0); /* We support only peripheral mode. */
+
+	/* mux VLYNQ pins */
+	davinci_cfg_reg(DM644X_VLYNQEN);
+	davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.map_io	      = davinci_sffsdr_map_io,
+	.init_irq     = davinci_sffsdr_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa15a57..39bf321d70a 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -164,11 +166,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec202f..27233cb4a2f 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@ struct clk {
 	u8			usecount;
 	u8			flags;
 	u8			lpsc;
+	u8			psc_ctlr;
 	struct clk              *parent;
 	struct pll_data         *pll_data;
 	u32                     div_reg;
@@ -93,4 +94,7 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
 #endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 00000000000..61ede19c6b5
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+	off_t offset = (off_t)context;
+
+	/* Read MAC addr from EEPROM */
+	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+	int i;
+	struct davinci_id *dip;
+	u8 variant = (jtag_id & 0xf0000000) >> 28;
+	u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+	for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+			i++, dip++)
+		/* Don't care about the manufacturer right now */
+		if ((dip->part_no == part_no) && (dip->variant == variant))
+			return dip;
+
+	return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+	int ret;
+	struct davinci_id *dip;
+
+	if (!soc_info) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+	if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+		iotable_init(davinci_soc_info.io_desc,
+				davinci_soc_info.io_desc_num);
+
+	/*
+	 * Normally devicemaps_init() would flush caches and tlb after
+	 * mdesc->map_io(), but we must also do it here because of the CPU
+	 * revision check below.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+
+	/*
+	 * We want to check CPU revision early for cpu_is_xxxx() macros.
+	 * IO space mapping must be initialized before we can do that.
+	 */
+	davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+	dip = davinci_get_id(davinci_soc_info.jtag_id);
+	if (!dip) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	davinci_soc_info.cpu_id = dip->cpu_id;
+	pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+	if (davinci_soc_info.cpu_clks) {
+		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+		if (ret != 0)
+			goto err;
+	}
+
+	davinci_intc_base = davinci_soc_info.intc_base;
+	davinci_intc_type = davinci_soc_info.intc_type;
+	return;
+
+err:
+	pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 00000000000..96c8e97a7de
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+	return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+	__raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+	/* XXX don't know why we need to disable nIRQ here... */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned reg		= BIT_WORD(irq);
+	unsigned mask		= BIT_MASK(irq);
+	unsigned polarity	= cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+	unsigned type		= cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		polarity |= mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		polarity &= ~mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		polarity |= mask;
+		type &= ~mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		polarity &= ~mask;
+		type &= ~mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+	cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+	return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+	.name		= "cp_intc",
+	.ack		= cp_intc_ack_irq,
+	.mask		= cp_intc_mask_irq,
+	.unmask		= cp_intc_unmask_irq,
+	.set_type	= cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio)
+{
+	unsigned num_reg	= BITS_TO_LONGS(num_irq);
+	int i;
+
+	cp_intc_base = base;
+
+	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+	/* Disable all host interrupts */
+	cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+	/* Disable system interrupts */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+	/* Set to normal mode, no nesting, no priority hold */
+	cp_intc_write(0, CP_INTC_CTRL);
+	cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+	/* Clear system interrupt status */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+	/* Enable nIRQ (what about nFIQ?) */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+	/*
+	 * Priority is determined by host channel: lower channel number has
+	 * higher priority i.e. channel 0 has highest priority and channel 31
+	 * had the lowest priority.
+	 */
+	num_reg = (num_irq + 3) >> 2;	/* 4 channels per register */
+	if (irq_prio) {
+		unsigned j, k;
+		u32 val;
+
+		for (k = i = 0; i < num_reg; i++) {
+			for (val = j = 0; j < 4; j++, k++) {
+				val >>= 8;
+				if (k < num_irq)
+					val |= irq_prio[k] << 24;
+			}
+
+			cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+		}
+	} else	{
+		/*
+		 * Default everything to channel 15 if priority not specified.
+		 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+		 * are mapped to nIRQ.
+		 */
+		for (i = 0; i < num_reg; i++)
+			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+	}
+
+	/* Set up genirq dispatching for cp_intc */
+	for (i = 0; i < num_irq; i++) {
+		set_irq_chip(i, &cp_intc_irq_chip);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		set_irq_handler(i, handle_edge_irq);
+	}
+
+	/* Enable global interrupt */
+	cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b93dd..de16f347566 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
 
 #define DAVINCI_I2C_BASE	     0x01C21000
+#define DAVINCI_MMCSD0_BASE	     0x01E10000
+#define DM355_MMCSD0_BASE	     0x01E11000
+#define DM355_MMCSD1_BASE	     0x01E00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 	(void) platform_device_register(&davinci_i2c_device);
 }
 
+#if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+	{
+		/* different on dm355 */
+		.start = DAVINCI_MMCSD0_BASE,
+		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_MMCINT,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		/* different on dm355 */
+		.start = IRQ_SDIOINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = DAVINCI_DMA_MMCRXEVT,
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = DAVINCI_DMA_MMCTXEVT,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+	.name = "davinci_mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask = &mmcsd0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd0_resources),
+	.resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+	{
+		.start = DM355_MMCSD1_BASE,
+		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_DM355_MMCINT1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DM355_SDIOINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = 30,	/* rx */
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = 31,	/* tx */
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+	.name = "davinci_mmc",
+	.id = 1,
+	.dev = {
+		.dma_mask = &mmcsd1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd1_resources),
+	.resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+	struct platform_device	*pdev = NULL;
+
+	if (WARN_ON(cpu_is_davinci_dm646x()))
+		return;
+
+	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+	 *
+	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+	 * not handled right here ...
+	 */
+	switch (module) {
+	case 1:
+		if (!cpu_is_davinci_dm355())
+			break;
+
+		/* REVISIT we may not need all these pins if e.g. this
+		 * is a hard-wired SDIO device...
+		 */
+		davinci_cfg_reg(DM355_SD1_CMD);
+		davinci_cfg_reg(DM355_SD1_CLK);
+		davinci_cfg_reg(DM355_SD1_DATA0);
+		davinci_cfg_reg(DM355_SD1_DATA1);
+		davinci_cfg_reg(DM355_SD1_DATA2);
+		davinci_cfg_reg(DM355_SD1_DATA3);
+
+		pdev = &davinci_mmcsd1_device;
+		break;
+	case 0:
+		if (cpu_is_davinci_dm355()) {
+			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
+			davinci_cfg_reg(DM355_MMCSD0);
+
+			/* enable RX EDMA */
+			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+		}
+
+		else if (cpu_is_davinci_dm644x()) {
+			/* REVISIT: should this be in board-init code? */
+			void __iomem *base =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+			/* Power-on 3.3V IO cells */
+			__raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+			/*Set up the pull regiter for MMC */
+			davinci_cfg_reg(DM644X_MSTK);
+		}
+
+		pdev = &davinci_mmcsd0_device;
+		break;
+	}
+
+	if (WARN_ON(!pdev))
+		return;
+
+	pdev->dev.platform_data = config;
+	platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+	platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER0_BASE),
+		.bottom_irq	= IRQ_TINT0_TINT12,
+		.top_irq	= IRQ_TINT0_TINT34,
+	},
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER1_BASE),
+		.bottom_irq	= IRQ_TINT1_TINT12,
+		.top_irq	= IRQ_TINT1_TINT34,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	davinci_init_wdt();
+
+	return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 00000000000..baaaf328de2
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+	.flags     = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+	.flags     = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	/* FIXME -- crystal rate is board-specific */
+	.rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+	.name = "vpss_dac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+	.name = "clkout1",
+	.parent = &pll1_aux_clk,
+	/* NOTE:  clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+	.name = "clkout2",
+	.parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+	.name = "clkout3",
+	.parent = &pll2_sysclkbp,
+	/* NOTE:  clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+	.name = "arm_clk",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ *   - in SyncReset state by default
+ *	.lpsc = DAVINCI_LPSC_TPCC,
+ *	.lpsc = DAVINCI_LPSC_TPTC0,
+ *	.lpsc = DAVINCI_LPSC_TPTC1,
+ *	.lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ *	.lpsc = DAVINCI_LPSC_MEMSTICK,
+ *   - in Enabled state by default
+ *	.lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ *	.lpsc = DAVINCI_LPSC_SCR2,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR3,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR4,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_CROSSBAR,	// "emulation"
+ *	.lpsc = DAVINCI_LPSC_CFG27,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG3,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG5,	// "test"
+ */
+
+static struct clk mjcp_clk = {
+	.name = "mjcp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+	.name = "asp1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+	.name = "mmcsd0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name = "mmcsd1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name = "spi0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name = "spi1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name = "spi2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name = "pwm3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+	.name = "timer3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+	.name = "rto",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "clkout2", &clkout2_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "clkout3", &clkout3_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK(NULL, "spi0", &spi0_clk),
+	CLK(NULL, "spi1", &spi1_clk),
+	CLK(NULL, "spi2", &spi2_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+	{
+		.start = 0x01c66000,
+		.end   = 0x01c667ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM355_SPINT0_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* Not yet used, so not included:
+	 * IORESOURCE_IRQ:
+	 *  - IRQ_DM355_SPINT0_0
+	 * IORESOURCE_DMA:
+	 *  - DAVINCI_DMA_SPI_SPIX
+	 *  - DAVINCI_DMA_SPI_SPIR
+	 */
+};
+
+static struct platform_device dm355_spi0_device = {
+	.name = "spi_davinci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &dm355_spi0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
+	.resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len)
+{
+	/* for now, assume we need MISO */
+	davinci_cfg_reg(DM355_SPI0_SDI);
+
+	/* not all slaves will be wired up */
+	if (chipselect_mask & BIT(0))
+		davinci_cfg_reg(DM355_SPI0_SDENA0);
+	if (chipselect_mask & BIT(1))
+		davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+	spi_register_board_info(info, len);
+
+	platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
+
+MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
+
+MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
+MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
+
+MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
+
+MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
+
+INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
+
+EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
+EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
+EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM355_CCDC_VDINT0]		= 2,
+	[IRQ_DM355_CCDC_VDINT1]		= 6,
+	[IRQ_DM355_CCDC_VDINT2]		= 6,
+	[IRQ_DM355_IPIPE_HST]		= 6,
+	[IRQ_DM355_H3AINT]		= 6,
+	[IRQ_DM355_IPIPE_SDR]		= 6,
+	[IRQ_DM355_IPIPEIFINT]		= 6,
+	[IRQ_DM355_OSDINT]		= 7,
+	[IRQ_DM355_VENCINT]		= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM355_RTOINT]		= 4,
+	[IRQ_DM355_UARTINT2]		= 7,
+	[IRQ_DM355_TINT6]		= 7,
+	[IRQ_CCINT0]			= 5,	/* dma */
+	[IRQ_CCERRINT]			= 5,	/* dma */
+	[IRQ_TCERRINT0]			= 5,	/* dma */
+	[IRQ_TCERRINT]			= 5,	/* dma */
+	[IRQ_DM355_SPINT2_1]		= 7,
+	[IRQ_DM355_TINT7]		= 4,
+	[IRQ_DM355_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM355_MMCINT1]		= 7,
+	[IRQ_DM355_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 7,
+	[IRQ_AEMIFINT]			= 7,
+	[IRQ_DM355_SDIOINT1]		= 4,
+	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 7,
+	[IRQ_PWMINT2]			= 7,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM355_SPINT0_0]		= 3,
+	[IRQ_DM355_SPINT0_1]		= 3,
+	[IRQ_DM355_GPIO0]		= 3,
+	[IRQ_DM355_GPIO1]		= 7,
+	[IRQ_DM355_GPIO2]		= 4,
+	[IRQ_DM355_GPIO3]		= 4,
+	[IRQ_DM355_GPIO4]		= 7,
+	[IRQ_DM355_GPIO5]		= 7,
+	[IRQ_DM355_GPIO6]		= 7,
+	[IRQ_DM355_GPIO7]		= 7,
+	[IRQ_DM355_GPIO8]		= 7,
+	[IRQ_DM355_GPIO9]		= 7,
+	[IRQ_DM355_GPIOBNK0]		= 7,
+	[IRQ_DM355_GPIOBNK1]		= 7,
+	[IRQ_DM355_GPIOBNK2]		= 7,
+	[IRQ_DM355_GPIOBNK3]		= 7,
+	[IRQ_DM355_GPIOBNK4]		= 7,
+	[IRQ_DM355_GPIOBNK5]		= 7,
+	[IRQ_DM355_GPIOBNK6]		= 7,
+	[IRQ_COMMTX]			= 7,
+	[IRQ_COMMRX]			= 7,
+	[IRQ_EMUINT]			= 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+	12, 13, 24, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm355_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb73b,
+		.manufacturer	= 0x00f,
+		.cpu_id		= DAVINCI_CPU_ID_DM355,
+		.name		= "dm355",
+	},
+};
+
+static void __iomem *dm355_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DM355_UART2_BASE,
+		.irq		= IRQ_DM355_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm355_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm355_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+	.io_desc		= dm355_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm355_ids,
+	.ids_num		= ARRAY_SIZE(dm355_ids),
+	.cpu_clks		= dm355_clks,
+	.psc_bases		= dm355_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm355_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm355_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm355_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= IRQ_DM355_GPIOBNK0,
+	.serial_dev		= &dm355_serial_device,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+	if (!cpu_is_davinci_dm355())
+		return 0;
+
+	davinci_cfg_reg(DM355_INT_EDMA_CC);
+	platform_device_register(&dm355_edma_device);
+	return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef192ea..fb5449b3c97 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
 #include <mach/clock.h>
@@ -20,6 +24,9 @@
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = {
 	CLK(NULL, NULL, NULL),
 };
 
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM644X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_1,
+};
 
 static struct resource dm644x_emac_resources[] = {
 	{
@@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = {
 static struct platform_device dm644x_emac_device = {
        .name		= "davinci_emac",
        .id		= 1,
+       .dev = {
+	       .platform_data	= &dm644x_emac_pdata,
+       },
        .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
        .resource	= dm644x_emac_resources,
 };
 
-#endif
+#define PINMUX0		0x00
+#define PINMUX1		0x04
 
 /*
  * Device specific mux setup
@@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = {
  *				reg  offset mask  mode
  */
 static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
 MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
@@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
 
 MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
 MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+#endif
 };
 
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]		= 2,
+	[IRQ_VDINT1]		= 6,
+	[IRQ_VDINT2]		= 6,
+	[IRQ_HISTINT]		= 6,
+	[IRQ_H3AINT]		= 6,
+	[IRQ_PRVUINT]		= 6,
+	[IRQ_RSZINT]		= 6,
+	[7]			= 7,
+	[IRQ_VENCINT]		= 6,
+	[IRQ_ASQINT]		= 6,
+	[IRQ_IMXINT]		= 6,
+	[IRQ_VLCDINT]		= 6,
+	[IRQ_USBINT]		= 4,
+	[IRQ_EMACINT]		= 4,
+	[14]			= 7,
+	[15]			= 7,
+	[IRQ_CCINT0]		= 5,	/* dma */
+	[IRQ_CCERRINT]		= 5,	/* dma */
+	[IRQ_TCERRINT0]		= 5,	/* dma */
+	[IRQ_TCERRINT]		= 5,	/* dma */
+	[IRQ_PSCIN]		= 7,
+	[21]			= 7,
+	[IRQ_IDE]		= 4,
+	[23]			= 7,
+	[IRQ_MBXINT]		= 7,
+	[IRQ_MBRINT]		= 7,
+	[IRQ_MMCINT]		= 7,
+	[IRQ_SDIOINT]		= 7,
+	[28]			= 7,
+	[IRQ_DDRINT]		= 7,
+	[IRQ_AEMIFINT]		= 7,
+	[IRQ_VLQINT]		= 4,
+	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
+	[IRQ_PWMINT0]		= 7,
+	[IRQ_PWMINT1]		= 7,
+	[IRQ_PWMINT2]		= 7,
+	[IRQ_I2C]		= 3,
+	[IRQ_UARTINT0]		= 3,
+	[IRQ_UARTINT1]		= 3,
+	[IRQ_UARTINT2]		= 3,
+	[IRQ_SPINT0]		= 3,
+	[IRQ_SPINT1]		= 3,
+	[45]			= 7,
+	[IRQ_DSP2ARM0]		= 4,
+	[IRQ_DSP2ARM1]		= 4,
+	[IRQ_GPIO0]		= 7,
+	[IRQ_GPIO1]		= 7,
+	[IRQ_GPIO2]		= 7,
+	[IRQ_GPIO3]		= 7,
+	[IRQ_GPIO4]		= 7,
+	[IRQ_GPIO5]		= 7,
+	[IRQ_GPIO6]		= 7,
+	[IRQ_GPIO7]		= 7,
+	[IRQ_GPIOBNK0]		= 7,
+	[IRQ_GPIOBNK1]		= 7,
+	[IRQ_GPIOBNK2]		= 7,
+	[IRQ_GPIOBNK3]		= 7,
+	[IRQ_GPIOBNK4]		= 7,
+	[IRQ_COMMTX]		= 7,
+	[IRQ_COMMRX]		= 7,
+	[IRQ_EMUINT]		= 7,
+};
 
 /*----------------------------------------------------------------------*/
 
@@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = {
 };
 
 /*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00008000),
+		.length		= SZ_16K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446",
+	},
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm644x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm644x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+	.io_desc		= dm644x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm644x_ids,
+	.ids_num		= ARRAY_SIZE(dm644x_ids),
+	.cpu_clks		= dm644x_clks,
+	.psc_bases		= dm644x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm644x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios 	= dm644x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm644x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 71,
+	.gpio_irq		= IRQ_GPIOBNK0,
+	.serial_dev		= &dm644x_serial_device,
+	.emac_pdata		= &dm644x_emac_pdata,
+	.sram_dma		= 0x00008000,
+	.sram_len		= SZ_16K,
+};
+
 void __init dm644x_init(void)
 {
-	davinci_clk_init(dm644x_clks);
-	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+	davinci_common_init(&davinci_soc_info_dm644x);
 }
 
 static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void)
 		return 0;
 
 	platform_device_register(&dm644x_edma_device);
+	platform_device_register(&dm644x_emac_device);
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 00000000000..334f0711e0f
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ		27000000
+#define DM646X_AUX_FREQ		24000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+	.name = "aux_clkin",
+	.rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name = "pll1_sysclk6",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name = "pll1_sysclk8",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name = "pll1_sysclk9",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2_clk",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DM646X_LPSC_C64X_CPU,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "I2CCLK",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_AEMIF,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM0,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM1,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_sysclk3,
+	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+	.name = "vpif0",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSMSTR,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+	.name = "vpif1",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSSLV,
+	.flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "aux", &aux_clkin),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "vpif0", &vpif0_clk),
+	CLK(NULL, "vpif1", &vpif1_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM646X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+	{
+		.start	= DM646X_EMAC_BASE,
+		.end	= DM646X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXTHINT,
+		.end	= IRQ_DM646X_EMACRXTHINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXINT,
+		.end	= IRQ_DM646X_EMACRXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACTXINT,
+		.end	= IRQ_DM646X_EMACTXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACMISCINT,
+		.end	= IRQ_DM646X_EMACMISCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm646x_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm646x_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
+	.resource	= dm646x_emac_resources,
+};
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+
+MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
+
+MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
+
+MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
+
+MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM646X_VP_VERTINT0]        = 7,
+	[IRQ_DM646X_VP_VERTINT1]        = 7,
+	[IRQ_DM646X_VP_VERTINT2]        = 7,
+	[IRQ_DM646X_VP_VERTINT3]        = 7,
+	[IRQ_DM646X_VP_ERRINT]          = 7,
+	[IRQ_DM646X_RESERVED_1]         = 7,
+	[IRQ_DM646X_RESERVED_2]         = 7,
+	[IRQ_DM646X_WDINT]              = 7,
+	[IRQ_DM646X_CRGENINT0]          = 7,
+	[IRQ_DM646X_CRGENINT1]          = 7,
+	[IRQ_DM646X_TSIFINT0]           = 7,
+	[IRQ_DM646X_TSIFINT1]           = 7,
+	[IRQ_DM646X_VDCEINT]            = 7,
+	[IRQ_DM646X_USBINT]             = 7,
+	[IRQ_DM646X_USBDMAINT]          = 7,
+	[IRQ_DM646X_PCIINT]             = 7,
+	[IRQ_CCINT0]                    = 7,    /* dma */
+	[IRQ_CCERRINT]                  = 7,    /* dma */
+	[IRQ_TCERRINT0]                 = 7,    /* dma */
+	[IRQ_TCERRINT]                  = 7,    /* dma */
+	[IRQ_DM646X_TCERRINT2]          = 7,
+	[IRQ_DM646X_TCERRINT3]          = 7,
+	[IRQ_DM646X_IDE]                = 7,
+	[IRQ_DM646X_HPIINT]             = 7,
+	[IRQ_DM646X_EMACRXTHINT]        = 7,
+	[IRQ_DM646X_EMACRXINT]          = 7,
+	[IRQ_DM646X_EMACTXINT]          = 7,
+	[IRQ_DM646X_EMACMISCINT]        = 7,
+	[IRQ_DM646X_MCASP0TXINT]        = 7,
+	[IRQ_DM646X_MCASP0RXINT]        = 7,
+	[IRQ_AEMIFINT]                  = 7,
+	[IRQ_DM646X_RESERVED_3]         = 7,
+	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
+	[IRQ_PWMINT0]                   = 7,
+	[IRQ_PWMINT1]                   = 7,
+	[IRQ_DM646X_VLQINT]             = 7,
+	[IRQ_I2C]                       = 7,
+	[IRQ_UARTINT0]                  = 7,
+	[IRQ_UARTINT1]                  = 7,
+	[IRQ_DM646X_UARTINT2]           = 7,
+	[IRQ_DM646X_SPINT0]             = 7,
+	[IRQ_DM646X_SPINT1]             = 7,
+	[IRQ_DM646X_DSP2ARMINT]         = 7,
+	[IRQ_DM646X_RESERVED_4]         = 7,
+	[IRQ_DM646X_PSCINT]             = 7,
+	[IRQ_DM646X_GPIO0]              = 7,
+	[IRQ_DM646X_GPIO1]              = 7,
+	[IRQ_DM646X_GPIO2]              = 7,
+	[IRQ_DM646X_GPIO3]              = 7,
+	[IRQ_DM646X_GPIO4]              = 7,
+	[IRQ_DM646X_GPIO5]              = 7,
+	[IRQ_DM646X_GPIO6]              = 7,
+	[IRQ_DM646X_GPIO7]              = 7,
+	[IRQ_DM646X_GPIOBNK0]           = 7,
+	[IRQ_DM646X_GPIOBNK1]           = 7,
+	[IRQ_DM646X_GPIOBNK2]           = 7,
+	[IRQ_DM646X_DDRINT]             = 7,
+	[IRQ_DM646X_AEMIFINT]           = 7,
+	[IRQ_COMMTX]                    = 7,
+	[IRQ_COMMRX]                    = 7,
+	[IRQ_EMUINT]                    = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+	 0,  1,  2,  3, 13,
+	14, 15, 24, 25, 26,
+	27, 30, 31, 54, 55,
+	56,
+	-1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 6,	/* 0-1, 4-7 */
+	.n_slot		= 512,
+	.n_tc		= 4,
+	.noevent	= dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm646x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb770,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6467,
+		.name		= "dm6467",
+	},
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_DM646X_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm646x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm646x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+	.io_desc		= dm646x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm646x_ids,
+	.ids_num		= ARRAY_SIZE(dm646x_ids),
+	.cpu_clks		= dm646x_clks,
+	.psc_bases		= dm646x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm646x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm646x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm646x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 43, /* Only 33 usable */
+	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
+	.serial_dev		= &dm646x_serial_device,
+	.emac_pdata		= &dm646x_emac_pdata,
+	.sram_dma		= 0x10010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm646x())
+		return 0;
+
+	platform_device_register(&dm646x_edma_device);
+	platform_device_register(&dm646x_emac_device);
+	return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c6351..1b6532159c5 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
@@ -37,14 +38,13 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-static unsigned __initdata ngpio;
-
 /* create a non-inlined version */
 static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
 
+static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
@@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int __init davinci_gpio_setup(void)
 {
 	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	/* The gpio banks conceptually expose a segmented bitmap,
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
 	 * and "ngpio" is one more than the largest zero-based
 	 * bit index that's valid.
 	 */
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		ngpio = 104;
-	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
-		ngpio = 71;
-	} else if (cpu_is_davinci_dm646x()) {
-		/* NOTE:  each bank has several "reserved" bits,
-		 * unusable as GPIOs.  Only 33 of the GPIO numbers
-		 * are usable, and we're not rejecting the others.
-		 */
-		ngpio = 43;
-	} else {
-		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
 		pr_err("GPIO setup:  how many GPIOs?\n");
 		return -EINVAL;
 	}
@@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void)
 		gpiochip_add(&chips[i].chip);
 	}
 
+	davinci_gpio_irq_setup();
 	return 0;
 }
 pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
 	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	unsigned status = irq_desc[irq].status;
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
 
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+	if (status & IRQ_TYPE_EDGE_FALLING)
 		__raw_writel(mask, &g->set_falling);
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+	if (status & IRQ_TYPE_EDGE_RISING)
 		__raw_writel(mask, &g->set_rising);
 }
 
@@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger)
 	irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
 	irq_desc[irq].status |= trigger;
 
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
+	/* don't enable the IRQ if it's currently disabled */
+	if (irq_desc[irq].depth == 0) {
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+			     ? &g->set_falling : &g->clr_falling);
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+			     ? &g->set_rising : &g->clr_rising);
+	}
 	return 0;
 }
 
@@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		mask <<= 16;
 
 	/* temporarily mask (level sensitive) parent IRQ */
+	desc->chip->mask(irq);
 	desc->chip->ack(irq);
 	while (1) {
 		u32		status;
@@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
-	unsigned	bank_irq;
 	struct clk	*clk;
 	u32		binten = 0;
+	unsigned	ngpio, bank_irq;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	ngpio = soc_info->gpio_num;
 
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		bank_irq = IRQ_DM355_GPIOBNK0;
-	} else if (cpu_is_davinci_dm644x()) {
-		bank_irq = IRQ_GPIOBNK0;
-	} else if (cpu_is_davinci_dm646x()) {
-		bank_irq = IRQ_DM646X_GPIOBNK0;
-	} else {
+	bank_irq = soc_info->gpio_irq;
+	if (bank_irq == 0) {
 		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
 		return -EINVAL;
 	}
@@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void)
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, (void *__iomem)
-		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+	__raw_writel(binten, soc_info->gpio_base + 0x08);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994cd79..00000000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
-	u8	variant;	/* JTAG ID bits 31:28 */
-	u16	part_no;	/* JTAG ID bits 27:12 */
-	u32	manufacturer;	/* JTAG ID bits 11:1 */
-	u32	type;		/* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
-	{
-		/* DM6446 */
-		.part_no      = 0xb700,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type	      = 0x64460000,
-	},
-	{
-		/* DM646X */
-		.part_no      = 0xb770,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type         = 0x64670000,
-	},
-	{
-		/* DM355 */
-		.part_no	= 0xb73b,
-		.variant	= 0x0,
-		.manufacturer	= 0x00f,
-		.type		= 0x03550000,
-	},
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
-	u32 dev_id, part_no;
-
-	dev_id = __raw_readl(JTAG_ID_BASE);
-
-	part_no = ((dev_id >> 12) & 0xffff);
-
-	return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
-	u32 variant;
-
-	variant = __raw_readl(JTAG_ID_BASE);
-
-	variant = (variant >> 28) & 0xf;
-
-	return variant;
-}
-
-unsigned int davinci_rev(void)
-{
-	return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
-	int i;
-	u16 part_no;
-	u8 variant;
-
-	part_no = davinci_get_part_no();
-	variant = davinci_get_variant();
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == (davinci_ids[i].part_no)) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the dev revision */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == davinci_ids[i].part_no &&
-		    variant == davinci_ids[i].variant) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
-	       davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
new file mode 100644
index 00000000000..e0abc437d79
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21c123..00000000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 19177097625..a1f03b606d8 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@ struct sys_timer;
 extern struct sys_timer davinci_timer;
 
 extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
 
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 
+struct davinci_timer_instance {
+	void __iomem	*base;
+	u32		bottom_irq;
+	u32		top_irq;
+	unsigned long	cmp_off;
+	unsigned int	cmp_irq;
+};
+
+struct davinci_timer_info {
+	struct davinci_timer_instance	*timers;
+	unsigned int			clockevent_id;
+	unsigned int			clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+	struct map_desc			*io_desc;
+	unsigned long			io_desc_num;
+	u32				cpu_id;
+	u32				jtag_id;
+	void __iomem			*jtag_id_base;
+	struct davinci_id		*ids;
+	unsigned long			ids_num;
+	struct davinci_clk		*cpu_clks;
+	void __iomem			**psc_bases;
+	unsigned long			psc_bases_num;
+	void __iomem			*pinmux_base;
+	const struct mux_config		*pinmux_pins;
+	unsigned long			pinmux_pins_num;
+	void __iomem			*intc_base;
+	int				intc_type;
+	u8				*intc_irq_prios;
+	unsigned long			intc_irq_num;
+	struct davinci_timer_info	*timer_info;
+	void __iomem			*wdt_base;
+	void __iomem			*gpio_base;
+	unsigned			gpio_num;
+	unsigned			gpio_irq;
+	struct platform_device		*serial_dev;
+	struct emac_platform_data	*emac_pdata;
+	dma_addr_t			sram_dma;
+	unsigned			sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT	0xfffe0000
+#define SRAM_SIZE	SZ_128K
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 00000000000..c4d27eec806
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV			0x00
+#define CP_INTC_CTRL			0x04
+#define CP_INTC_HOST_CTRL		0x0C
+#define CP_INTC_GLOBAL_ENABLE		0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL	0x1C
+#define CP_INTC_SYS_STAT_IDX_SET	0x20
+#define CP_INTC_SYS_STAT_IDX_CLR	0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET	0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR	0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE	0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET	0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR	0x38
+#define CP_INTC_PACING_PRESCALE 	0x40
+#define CP_INTC_VECTOR_BASE		0x50
+#define CP_INTC_VECTOR_SIZE		0x54
+#define CP_INTC_VECTOR_NULL		0x58
+#define CP_INTC_PRIO_IDX		0x80
+#define CP_INTC_PRIO_VECTOR		0x84
+#define CP_INTC_SECURE_ENABLE		0x90
+#define CP_INTC_SECURE_PRIO_IDX 	0x94
+#define CP_INTC_PACING_PARAM(n) 	(0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n)		(0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n)		(0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) 	(0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) 	(0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n)	(0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n)	(0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n)		(0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n)		(0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n)	(0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) 	(0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n)		(0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n)	(0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) 	(0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n)	(0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n)	(0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n)		(0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio);
+
+#endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b3a66..d12a5ed2959 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
 
-#define IS_DAVINCI_CPU(type, id)			\
-static inline int is_davinci_dm ##type(void)	        \
-{							\
-	return (davinci_rev() == (id)) ? 1 : 0;	        \
+struct davinci_id {
+	u8	variant;	/* JTAG ID bits 31:28 */
+	u16	part_no;	/* JTAG ID bits 27:12 */
+	u16	manufacturer;	/* JTAG ID bits 11:1 */
+	u32	cpu_id;
+	char	*name;
+};
+
+/* Can use lower 16 bits of cpu id  for a variant when required */
+#define	DAVINCI_CPU_ID_DM6446		0x64460000
+#define	DAVINCI_CPU_ID_DM6467		0x64670000
+#define	DAVINCI_CPU_ID_DM355		0x03550000
+
+#define IS_DAVINCI_CPU(type, id)					\
+static inline int is_davinci_ ##type(void)				\
+{									\
+	return (davinci_soc_info.cpu_id == (id));			\
 }
 
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d06..de3fc2182b4 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
  * or implied.
  */
 
+/* Modifications
+ * Jan 2009	Chaithrika U S	Added senduart, busyuart, waituart
+ *				macros, based on debug-8250.S file
+ *				but using 32-bit accesses required for
+ *                              some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT	2
+
 		.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
@@ -17,5 +27,22 @@
 		orr	\rx, \rx, #0x00c20000   @ UART 0
 		.endm
 
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:		ldr	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 00000000000..54903b72438
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4e58b..15d42b92a8c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
 
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
+#include <mach/emac.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 00000000000..1fc764c8646
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE		(0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM646X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc5396daf..24a379239d7 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 00000000000..beff4fb7c84
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+	char mac_addr[ETH_ALEN];
+	u32 ctrl_reg_offset;
+	u32 ctrl_mod_reg_offset;
+	u32 ctrl_ram_offset;
+	u32 mdio_reg_offset;
+	u32 ctrl_ram_size;
+	u32 phy_mask;
+	u32 mdio_max_freq;
+	u8 rmii_en;
+	u8 version;
+};
+
+enum {
+	EMAC_VERSION_1,	/* DM644x */
+	EMAC_VERSION_2,	/* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f933b..fbdebc7cb40 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		ldr \base, =davinci_intc_base
+		ldr \base, [\base]
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+		ldr \tmp, =davinci_intc_type
+		ldr \tmp, [\tmp]
+		cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+		beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
 		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
+		movs \tmp, \tmp, lsr #2
 		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
+		b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001:		ldr \irqnr, [\base, #0x80] /* get irq number */
+		and \irqnr, \irqnr, #0xff  /* irq is in bits 0-9 */
+		mov \tmp, \irqnr, lsr #3
+		and \tmp, \tmp, #0xfc
+		add \tmp, \tmp, #0x280 /* get the register offset */
+		ldr \irqstat, [\base, \tmp] /* get the intc status */
+		cmp \irqstat, #0x0
+#endif
+1002:
 		.endm
 
 		.macro	irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281364e..ae074556831 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
+#include <mach/common.h>
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
@@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem
 __gpio_to_controller(unsigned gpio)
 {
 	void *__iomem ptr;
+	void __iomem *base = davinci_soc_info.gpio_base;
 
 	if (gpio < 32 * 1)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+		ptr = base + 0x10;
 	else if (gpio < 32 * 2)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+		ptr = base + 0x38;
 	else if (gpio < 32 * 3)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+		ptr = base + 0x88;
 	else
 		ptr = NULL;
 	return ptr;
@@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio)
 {
 	if (gpio >= DAVINCI_N_GPIO)
 		return -EINVAL;
-	return DAVINCI_N_AINTC_IRQ + gpio;
+	return davinci_soc_info.intc_irq_num + gpio;
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - DAVINCI_N_AINTC_IRQ;
+	return irq - davinci_soc_info.intc_irq_num;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 18066074c99..bc5d6aaa69a 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
 /* Base address */
 #define DAVINCI_ARM_INTC_BASE 0x01C48000
 
+#define DAVINCI_INTC_TYPE_AINTC		0
+#define DAVINCI_INTC_TYPE_CP_INTC	1
+
 /* Interrupt lines */
 #define IRQ_VDINT0       0
 #define IRQ_VDINT1       1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7f3ce..c712c7cdf38 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
  * Definitions
  **************************************************************************/
 #define DAVINCI_DDR_BASE    0x80000000
-#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
 
 #define PHYS_OFFSET DAVINCI_DDR_BASE
 
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 00000000000..5a85e24f367
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ *  Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+	/* get_cd()/get_wp() may sleep */
+	int	(*get_cd)(int module);
+	int	(*get_ro)(int module);
+	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+	u8	wires;
+
+	u32     max_freq;
+
+	/* any additional host capabilities: OR'd in to mmc->f_caps */
+	u32     caps;
+
+	/* Version of the MMC/SD controller */
+	u8	version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
+	MMC_CTLR_VERSION_2,	/* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb3e27..27378458542 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
 #ifndef __INC_MACH_MUX_H
 #define __INC_MACH_MUX_H
 
-/* System module registers */
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-/* dm355 only */
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define INTMUX			0x18
-#define EVTMUX			0x1c
-
 struct mux_config {
 	const char *name;
 	const char *mux_reg_name;
@@ -168,15 +158,9 @@ enum davinci_dm355_index {
 
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
-				unsigned long size);
 extern int davinci_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
-				       unsigned long size) { return 0; }
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d419fa..ab8a2586d1c 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
 #ifndef __ASM_ARCH_PSC_H
 #define __ASM_ARCH_PSC_H
 
+#define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
+
 /* Power and Sleep Controller (PSC) Domains */
 #define DAVINCI_GPSC_ARMDOMAIN      0
 #define DAVINCI_GPSC_DSPDOMAIN      1
@@ -116,8 +118,8 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
-			       char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable);
 
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d74a1..794fa5cf93c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
@@ -30,6 +28,6 @@ struct davinci_uart_config {
 	unsigned int enabled_uarts;
 };
 
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 00000000000..111f7cc71e0
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 00000000000..1c971d8d8ba
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
+
+enum {
+	T0_BOT,
+	T0_TOP,
+	T1_BOT,
+	T1_TOP,
+	NUM_TIMERS
+};
+
+#define IS_TIMER1(id)		(id & 0x2)
+#define IS_TIMER0(id)		(!IS_TIMER1(id))
+#define IS_TIMER_TOP(id)	((id & 0x1))
+#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165def37b..1e27475f9a2 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
 #include <linux/serial_reg.h>
 #include <mach/serial.h>
 
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+	/* Add logic here for new platforms, using __macine_arch_type */
+	return (u32 *)DAVINCI_UART0_BASE;
+}
+
 /* PORT_16C550A, in polled non-fifo mode */
 
 static void putc(char c)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
 
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
@@ -26,7 +39,9 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
+
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 }
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb513e..49912b48b1b 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
  */
 
 #include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init davinci_map_common_io(void)
-{
-	iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/* We want to check CPU revision early for cpu_is_xxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	davinci_check_revision();
-}
 
 #define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c90e29..af92ffee847 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
 
 #include <mach/hardware.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
@@ -41,18 +42,14 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
 static inline unsigned int davinci_irq_readl(int offset)
 {
-	return __raw_readl(INTC_BASE + offset);
+	return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-	__raw_writel(value, INTC_BASE + offset);
+	__raw_writel(value, davinci_intc_base + offset);
 }
 
 /* Disable interrupt */
@@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = {
 	.unmask = davinci_unmask_irq,
 };
 
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_AEMIFINT]                  = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
 	unsigned i;
-
-	if (cpu_is_davinci_dm644x())
-		davinci_def_priorities = dm644x_default_priorities;
-	else if (cpu_is_davinci_dm646x())
-		davinci_def_priorities = dm646x_default_priorities;
-	else if (cpu_is_davinci_dm355())
-		davinci_def_priorities = dm355_default_priorities;
+	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b247a4..d310f579aa8 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
-				unsigned long size)
-{
-	mux_table = pins;
-	pin_table_sz = size;
-
-	return 0;
-}
+#include <mach/common.h>
 
 /*
  * Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins,
 int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
-	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->pinmux_base;
 	unsigned long flags;
 	const struct mux_config *cfg;
 	unsigned int reg_orig = 0, reg = 0;
 	unsigned int mask, warn = 0;
 
-	if (!mux_table)
+	if (!soc_info->pinmux_pins)
 		BUG();
 
-	if (index >= pin_table_sz) {
+	if (index >= soc_info->pinmux_pins_num) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, soc_info->pinmux_pins_num);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = &mux_table[index];
+	cfg = &soc_info->pinmux_pins[index];
 
 	if (cfg->name == NULL) {
 		printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171abf5f7..a78b657e916 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
 #include <mach/psc.h>
 #include <mach/mux.h>
 
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
@@ -42,22 +40,42 @@
 #define MDSTAT_STATE_MASK 0x1f
 
 /* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
-	u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+	void __iomem *psc_base;
+	u32 mdstat;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return 0;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 
 	/* if clocked, state can be "Enable" or "SyncReset" */
 	return mdstat & BIT(12);
 }
 
 /* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+	void __iomem *psc_base;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 69507579652..c530c7333d0 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
 #include <mach/serial.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
+
 #include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
 }
 
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= IRQ_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 {
 	unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
 {
 	int i;
 	char name[16];
 	struct clk *uart_clk;
-	struct device *dev = &serial_device.dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+	struct plat_serial8250_port *p = dev->platform_data;
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
+	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
-
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->flags = 0;
+	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+		if (!(info->enabled_uarts & (1 << i)))
 			continue;
-		}
-
-		if (cpu_is_davinci_dm646x())
-			p->iotype = UPIO_MEM32;
-
-		if (cpu_is_davinci_dm355()) {
-			if (i == 2) {
-				p->mapbase = (unsigned long)DM355_UART2_BASE;
-				p->irq = IRQ_DM355_UARTINT2;
-			}
-		}
 
 		sprintf(name, "uart%d", i);
 		uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
 			davinci_serial_reset(p);
 		}
 	}
-}
 
-static int __init davinci_init(void)
-{
-	return platform_device_register(&serial_device);
+	return platform_device_register(soc_info->serial_dev);
 }
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 00000000000..db54b2a66b4
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+	unsigned long vaddr;
+	dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+	if (dma)
+		*dma = 0;
+	if (!sram_pool || (dma && !dma_base))
+		return NULL;
+
+	vaddr = gen_pool_alloc(sram_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	if (dma)
+		*dma = dma_base + (vaddr - SRAM_VIRT);
+	return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+	gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM:  as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+	unsigned len = davinci_soc_info.sram_len;
+	int status = 0;
+
+	if (len) {
+		len = min(len, SRAM_SIZE);
+		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+		if (!sram_pool)
+			status = -ENOMEM;
+	}
+	if (sram_pool)
+		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+	WARN_ON(status < 0);
+	return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01bff5c..0884ca57bfb 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -28,52 +29,41 @@
 #include <asm/errno.h>
 #include <mach/io.h>
 #include <mach/cputype.h>
+#include <mach/time.h>
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
 static unsigned int davinci_clock_tick_rate;
 
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE   (IO_PHYS + 0x21C00)
-
-enum {
-	T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id)    (id & 0x2)
-#define IS_TIMER0(id)    (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
-	IRQ_TINT0_TINT12,
-	IRQ_TINT0_TINT34,
-	IRQ_TINT1_TINT12,
-	IRQ_TINT1_TINT34,
-};
-
 /*
  * This driver configures the 2 64-bit count-up timers as 4 independent
  * 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
  */
-#define TID_CLOCKEVENT  T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+	TID_CLOCKEVENT,
+	TID_CLOCKSOURCE,
+};
 
 /* Timer register offsets */
-#define PID12                        0x0
-#define TIM12                        0x10
-#define TIM34                        0x14
-#define PRD12                        0x18
-#define PRD34                        0x1c
-#define TCR                          0x20
-#define TGCR                         0x24
-#define WDTCR                        0x28
+#define PID12			0x0
+#define TIM12			0x10
+#define TIM34			0x14
+#define PRD12			0x18
+#define PRD34			0x1c
+#define TCR			0x20
+#define TGCR			0x24
+#define WDTCR			0x28
+
+/* Offsets of the 8 compare registers */
+#define	CMP12_0			0x60
+#define	CMP12_1			0x64
+#define	CMP12_2			0x68
+#define	CMP12_3			0x6c
+#define	CMP12_4			0x70
+#define	CMP12_5			0x74
+#define	CMP12_6			0x78
+#define	CMP12_7			0x7c
 
 /* Timer register bitfields */
 #define TCR_ENAMODE_DISABLE          0x0
@@ -105,6 +95,7 @@ struct timer_s {
 	unsigned int id;
 	unsigned long period;
 	unsigned long opts;
+	unsigned long flags;
 	void __iomem *base;
 	unsigned long tim_off;
 	unsigned long prd_off;
@@ -114,30 +105,58 @@ struct timer_s {
 static struct timer_s timers[];
 
 /* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED   0x00
-#define TIMER_OPTS_ONESHOT    0x01
-#define TIMER_OPTS_PERIODIC   0x02
+#define TIMER_OPTS_DISABLED		0x01
+#define TIMER_OPTS_ONESHOT		0x02
+#define TIMER_OPTS_PERIODIC		0x04
+#define TIMER_OPTS_STATE_MASK		0x07
+
+#define TIMER_OPTS_USE_COMPARE		0x80000000
+#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+	[T0_BOT]	= "timer0_0",
+	[T0_TOP]	= "timer0_1",
+	[T1_BOT]	= "timer1_0",
+	[T1_TOP]	= "timer1_1",
+};
 
 static int timer32_config(struct timer_s *t)
 {
-	u32 tcr = __raw_readl(t->base + TCR);
-
-	/* disable timer */
-	tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-	__raw_writel(tcr, t->base + TCR);
-
-	/* reset counter to zero, set new period */
-	__raw_writel(0, t->base + t->tim_off);
-	__raw_writel(t->period, t->base + t->prd_off);
-
-	/* Set enable mode */
-	if (t->opts & TIMER_OPTS_ONESHOT) {
-		tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-	} else if (t->opts & TIMER_OPTS_PERIODIC) {
-		tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+	u32 tcr;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (USING_COMPARE(t)) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+		/*
+		 * Next interrupt should be the current time reg value plus
+		 * the new period (using 32-bit unsigned addition/wrapping
+		 * to 0 on overflow).  This assumes that the clocksource
+		 * is setup to count to 2^32-1 before wrapping around to 0.
+		 */
+		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+			t->base + dtip[event_timer].cmp_off);
+	} else {
+		tcr = __raw_readl(t->base + TCR);
+
+		/* disable timer */
+		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+		__raw_writel(tcr, t->base + TCR);
+
+		/* reset counter to zero, set new period */
+		__raw_writel(0, t->base + t->tim_off);
+		__raw_writel(t->period, t->base + t->prd_off);
+
+		/* Set enable mode */
+		if (t->opts & TIMER_OPTS_ONESHOT)
+			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+		else if (t->opts & TIMER_OPTS_PERIODIC)
+			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+		__raw_writel(tcr, t->base + TCR);
 	}
-
-	__raw_writel(tcr, t->base + TCR);
 	return 0;
 }
 
@@ -182,13 +201,14 @@ static struct timer_s timers[] = {
 
 static void __init timer_init(void)
 {
-	u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
 		u32 tgcr;
-		void __iomem *base = IO_ADDRESS(phys_bases[i]);
+		void __iomem *base = dtip[i].base;
 
 		/* Disabled, Internal clock source */
 		__raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@ static void __init timer_init(void)
 	/* Init of each timer as a 32-bit timer */
 	for (i=0; i< ARRAY_SIZE(timers); i++) {
 		struct timer_s *t = &timers[i];
-		u32 phys_base;
-
-		if (t->name) {
-			t->id = i;
-			phys_base = (IS_TIMER1(t->id) ?
-			       DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
-			t->base = IO_ADDRESS(phys_base);
-
-			if (IS_TIMER_BOT(t->id)) {
-				t->enamode_shift = 6;
-				t->tim_off = TIM12;
-				t->prd_off = PRD12;
-			} else {
-				t->enamode_shift = 22;
-				t->tim_off = TIM34;
-				t->prd_off = PRD34;
-			}
-
-			/* Register interrupt */
-			t->irqaction.name = t->name;
-			t->irqaction.dev_id = (void *)t;
-			if (t->irqaction.handler != NULL) {
-				setup_irq(timer_irqs[t->id], &t->irqaction);
-			}
-
-			timer32_config(&timers[i]);
+		int timer = ID_TO_TIMER(t->id);
+		u32 irq;
+
+		t->base = dtip[timer].base;
+
+		if (IS_TIMER_BOT(t->id)) {
+			t->enamode_shift = 6;
+			t->tim_off = TIM12;
+			t->prd_off = PRD12;
+			irq = dtip[timer].bottom_irq;
+		} else {
+			t->enamode_shift = 22;
+			t->tim_off = TIM34;
+			t->prd_off = PRD34;
+			irq = dtip[timer].top_irq;
+		}
+
+		/* Register interrupt */
+		t->irqaction.name = t->name;
+		t->irqaction.dev_id = (void *)t;
+
+		if (t->irqaction.handler != NULL) {
+			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+			setup_irq(irq, &t->irqaction);
 		}
+
+		timer32_config(&timers[i]);
 	}
 }
 
@@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_davinci = {
-	.name		= "timer0_1",
 	.rating		= 300,
 	.read		= read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode,
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts = TIMER_OPTS_PERIODIC;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_PERIODIC;
 		timer32_config(t);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts = TIMER_OPTS_ONESHOT;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_ONESHOT;
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts = TIMER_OPTS_DISABLED;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_DISABLED;
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_davinci = {
-	.name		= "timer0_0",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
@@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = {
 static void __init davinci_timer_init(void)
 {
 	struct clk *timer_clk;
-
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	unsigned int clockevent_id;
+	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
 
+	clockevent_id = soc_info->timer_info->clockevent_id;
+	clocksource_id = soc_info->timer_info->clocksource_id;
+
+	timers[TID_CLOCKEVENT].id = clockevent_id;
+	timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+	/*
+	 * If using same timer for both clock events & clocksource,
+	 * a compare register must be used to generate an event interrupt.
+	 * This is equivalent to a oneshot timer only (not periodic).
+	 */
+	if (clockevent_id == clocksource_id) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(clockevent_id);
+
+		/* Only bottom timers can use compare regs */
+		if (IS_TIMER_TOP(clockevent_id))
+			pr_warning("davinci_timer_init: Invalid use"
+				" of system timers.  Results unpredictable.\n");
+		else if ((dtip[event_timer].cmp_off == 0)
+				|| (dtip[event_timer].cmp_irq == 0))
+			pr_warning("davinci_timer_init:  Invalid timer instance"
+				" setup.  Results unpredictable.\n");
+		else {
+			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+		}
+	}
+
 	/* init timer hw */
 	timer_init();
 
@@ -325,6 +378,7 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
+	clocksource_davinci.name = id_to_name[clocksource_id];
 	clocksource_davinci.mult =
 		clocksource_khz2mult(davinci_clock_tick_rate/1000,
 				     clocksource_davinci.shift);
@@ -332,12 +386,12 @@ static void __init davinci_timer_init(void)
 		printk(err, clocksource_davinci.name);
 
 	/* setup clockevent */
+	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
 	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
 					 clockevent_davinci.shift);
 	clockevent_davinci.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_davinci);
+	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@ struct sys_timer davinci_timer = {
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
 	u32 tgcr, wdtcr;
-	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
-	struct device dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->wdt_base;
 	struct clk *wd_clk;
-	char *name = "watchdog";
 
-	dev_set_name(&dev, name);
-	wd_clk = clk_get(&dev, NULL);
+	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 56bddcef690..d7291c682a6 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,87 +9,135 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+choice
+	prompt "EP93xx first SDRAM bank selection"
+	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "0x00000000 - SDCE3/SyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+	bool "0xc0000000 - SDCEO"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xc0000000
+
+endchoice
+
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
 
+config MACH_EDB93XX
+	bool
+
+config MACH_EDB9301
+	bool "Support Cirrus Logic EDB9301"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9301 Evaluation Board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302A Evaluation Board.
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307 Evaluation Board.
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307A Evaluation Board.
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9312 Evaluation Board.
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315 Evaluation Board.
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
 config MACH_MICRO9
-        bool
-        default n
+	bool
 
 config MACH_MICRO9H
-       bool "Support Contec Hypercontrol Micro9-H"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-H board.
+	bool "Support Contec Hypercontrol Micro9-H"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-H board.
 
 config MACH_MICRO9M
-       bool "Support Contec Hypercontrol Micro9-M"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-M board.
+	bool "Support Contec Hypercontrol Micro9-M"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-M board.
 
 config MACH_MICRO9L
-       bool "Support Contec Hypercontrol Micro9-L"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-L board.
+	bool "Support Contec Hypercontrol Micro9-L"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-L board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 9522e205b73..eae6199a989 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,13 +7,7 @@ obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
-obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
-obj-$(CONFIG_MACH_EDB9307)	+= edb9307.o
-obj-$(CONFIG_MACH_EDB9307A)	+= edb9307a.o
-obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
-obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
-obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d5561ad15ba..27a085a8f12 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,2 +1,5 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
+   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e8ebeaea6c4..6c4c1633ed1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -21,15 +21,50 @@
 #include <asm/div64.h>
 #include <mach/hardware.h>
 
+
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+
 struct clk {
 	unsigned long	rate;
 	int		users;
+	int		sw_locked;
 	u32		enable_reg;
 	u32		enable_mask;
+
+	unsigned long	(*get_rate)(struct clk *clk);
 };
 
-static struct clk clk_uart = {
-	.rate		= 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart2 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart3 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
 static struct clk clk_f;
@@ -37,73 +72,73 @@ static struct clk clk_h;
 static struct clk clk_p;
 static struct clk clk_pll2;
 static struct clk clk_usb_host = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00020000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00010000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00080000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00040000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00200000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00100000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00800000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00400000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x02000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x01000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x04000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x08000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
 
 #define INIT_CK(dev,con,ck)					\
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart),
-	INIT_CK("apb:uart2", NULL, &clk_uart),
-	INIT_CK("apb:uart3", NULL, &clk_uart),
+	INIT_CK("apb:uart1", NULL, &clk_uart1),
+	INIT_CK("apb:uart2", NULL, &clk_uart2),
+	INIT_CK("apb:uart3", NULL, &clk_uart3),
 	INIT_CK(NULL, "pll1", &clk_pll1),
 	INIT_CK(NULL, "fclk", &clk_f),
 	INIT_CK(NULL, "hclk", &clk_h),
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
 	INIT_CK(NULL, "m2p0", &clk_m2p0),
 	INIT_CK(NULL, "m2p1", &clk_m2p1),
 	INIT_CK(NULL, "m2p2", &clk_m2p2),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value | clk->enable_mask, clk->enable_reg);
 	}
 
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
 
+static unsigned long get_uart_rate(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
+		return EP93XX_EXT_CLK_RATE;
+	else
+		return EP93XX_EXT_CLK_RATE / 2;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = 14745600;
+	rate = EP93XX_EXT_CLK_RATE;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = 14745600;
+		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = 14745600;
+		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858..204dc5cbd0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
 
 /* Port ordering is: A B F */
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
 	int port_mask = 1 << (line & 7);
 
 	if (enable)
-		gpio_int_debouce[port] |= port_mask;
+		gpio_int_debounce[port] |= port_mask;
 	else
-		gpio_int_debouce[port] &= ~port_mask;
+		gpio_int_debounce[port] &= ~port_mask;
 
-	__raw_writeb(gpio_int_debouce[port],
+	__raw_writeb(gpio_int_debounce[port],
 		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
 }
 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
 };
 
 
+static struct resource ep93xx_rtc_resource[] = {
+	{
+		.start		= EP93XX_RTC_PHYS_BASE,
+		.end		= EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device ep93xx_rtc_device = {
-       .name           = "ep93xx-rtc",
-       .id             = -1,
-       .num_resources  = 0,
+	.name		= "ep93xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
+	.resource	= ep93xx_rtc_resource,
 };
 
 
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
deleted file mode 100644
index 8bf8d7c78f1..00000000000
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302_flash);
-
-	ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
deleted file mode 100644
index a352c57c7b4..00000000000
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302a_flash);
-
-	ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
deleted file mode 100644
index 5ab22f63a4e..00000000000
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9307_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307_flash);
-
-	ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
deleted file mode 100644
index 6171167d331..00000000000
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9307a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
-	{
-		/* On-board battery backed RTC */
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-	/*
-	 * The I2C signals are also routed to the Expansion Connector (J4)
-	 */
-};
-
-static void __init edb9307a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307a_flash);
-
-	ep93xx_register_eth(&edb9307a_eth_data, 1);
-
-	ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
deleted file mode 100644
index d7179f66d80..00000000000
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * 	Toufeeq Hussain	<toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9312_flash);
-
-	ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9312_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
deleted file mode 100644
index 025af6eaca1..00000000000
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9315_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315_flash);
-
-	ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
deleted file mode 100644
index 4c9cc8a39f5..00000000000
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9315a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315a_flash);
-
-	ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 00000000000..e9e45b92457
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+			resource_size_t start, resource_size_t size)
+{
+	edb93xx_flash_data.width	= width;
+	edb93xx_flash_resource.start	= start;
+	edb93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+	if (machine_is_edb9307() || machine_is_edb9312() ||
+	    machine_is_edb9315()) {
+		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+	} else {
+		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+	}
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+	if (machine_is_edb9302a() || machine_is_edb9307a() ||
+	    machine_is_edb9315a()) {
+		ep93xx_register_i2c(edb93xxa_i2c_data,
+				ARRAY_SIZE(edb93xxa_i2c_data));
+	} else if (machine_is_edb9307() || machine_is_edb9312() ||
+		   machine_is_edb9315()) {
+		ep93xx_register_i2c(edb93xx_i2c_data,
+				ARRAY_SIZE(edb93xx_i2c_data));
+	}
+}
+
+static void __init edb93xx_init_machine(void)
+{
+	ep93xx_init_devices();
+	edb93xx_register_flash();
+	ep93xx_register_eth(&edb93xx_eth_data, 1);
+	edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index f66be12b856..967c079180d 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,19 +147,36 @@
 #define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
 
 #define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
 
 #define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
 #define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
 #define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 5c80c3c8158..925b12ea099 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -5,6 +5,12 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
 
 #endif
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
index de6752674c0..213a4fcfeb1 100644
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -15,10 +15,9 @@
 /*
  * Memory Map definitions
  */
-/* FIXME: Does it really swap SRAM like this? */
 #ifdef CONFIG_GEMINI_MEM_SWAP
 # define GEMINI_DRAM_BASE	0x00000000
-# define GEMINI_SRAM_BASE	0x20000000
+# define GEMINI_SRAM_BASE	0x70000000
 #else
 # define GEMINI_SRAM_BASE	0x00000000
 # define GEMINI_DRAM_BASE	0x10000000
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194ac6e..00000000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
-	depends on ARCH_IMX
-
-config ARCH_MX1ADS
-	bool "mx1ads"
-	depends on ARCH_IMX
-	select ISA
-	help
-	  Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e795a..00000000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			+= irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX)	+= cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS)	+=  $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5b808..00000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-$(CONFIG_ARCH_MX1ADS)	:= 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332aeb942..00000000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
-	struct list_head node;
-	const char *name;
-	unsigned long (*get_rate)(void);
-};
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-	return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
-	return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
-	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
-	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
-	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
-	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
-	.name = "system_clk",
-	.get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
-	.name = "hclk",
-	.get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
-	.name = "mcu_clk",
-	.get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
-	.name = "perclk1",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
-	.name = "uart_clk",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
-	.name = "perclk2",
-	.get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
-	.name = "perclk3",
-	.get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
-	&clk_perclk1,
-	&clk_perclk2,
-	&clk_perclk3,
-	&clk_system_clk,
-	&clk_hclk,
-	&clk_mcu_clk,
-	&clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (!strcmp(p->name, id)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
-	int i;
-
-	mutex_lock(&clocks_mutex);
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		list_add(&clks[i]->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca0af6..00000000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE	0xC0000000
-#define CR_920T_FASTBUS_MODE	0x00000000
-#define CR_920T_ASYNC_MODE	0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
-	unsigned long flags;
-
-	if (mpctl0 == 0) {
-		local_irq_save(flags);
-		CSCR &= ~CSCR_MPEN;
-		local_irq_restore(flags);
-		return;
-	}
-
-	local_irq_save(flags);
-	MPCTL0 = mpctl0;
-	CSCR |= CSCR_MPEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl:	pointer to location assigned by new PLL control register value
- * @cur_mpctl:	current PLL control register parameters
- * @f_ref:	reference source frequency Hz
- * @freq:	required frequency in Hz
- * @relation:	is one of %CPUFREQ_RELATION_L (supremum)
- *		and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
-        u32 mfi;
-        u32 mfn;
-        u32 mfd;
-        u32 pd;
-	unsigned long long ll;
-	long l;
-	long quot;
-
-	/* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
-	/*  PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
-	if (cur_mpctl) {
-		mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
-		pd =  ((cur_mpctl >> 26) & 0xf) + 1;
-	} else {
-		pd=2; mfd=313;
-	}
-
-	/* pd=2; mfd=313; mfi=8; mfn=183; */
-	/* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
-	quot = (f_ref + (1 << 9)) >> 10;
-	l = (freq * pd + quot) / (2 * quot);
-	mfi = l >> 10;
-	mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
-	mfd -= 1;
-	pd -= 1;
-
-	*new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
-		| ((pd & 0xf) << 26);
-
-	ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-	quot = (pd+1) * (1<<16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	freq = ll;
-
-	pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
-		pd, mfd, mfi, mfn, freq);
-
-	return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
-	unsigned int freq;
-	unsigned int cr;
-	unsigned int cscr;
-	unsigned int bclk_div;
-
-	if (cpu)
-		return 0;
-
-	cscr = CSCR;
-	bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
-	cr = get_cr();
-
-	if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-		freq = clk_get_rate(system_clk);
-		freq = (freq + bclk_div/2) / bclk_div;
-	} else {
-		freq = clk_get_rate(mcu_clk);
-		if (cscr & CSCR_MPU_PRESC)
-			freq /= 2;
-	}
-
-	freq = (freq + 500) / 1000;
-
-	return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	u32 mpctl0 = 0;
-	u32 cscr;
-	unsigned long flags;
-	long freq;
-	long sysclk;
-	unsigned int bclk_div = bclk_div_at_boot;
-
-	/*
-	 * Some governors do not respects CPU and policy lower limits
-	 * which leads to bad things (division by zero etc), ensure
-	 * that such things do not happen.
-	 */
-	if(target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-
-	if(target_freq < policy->min)
-		target_freq = policy->min;
-
-	freq = target_freq * 1000;
-
-	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
-			freq, mpctl0_at_boot);
-
-	sysclk = clk_get_rate(system_clk);
-
-	if (freq > sysclk / bclk_div_at_boot + 1000000) {
-		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
-		if (freq < 0) {
-			printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
-			return -EINVAL;
-		}
-	} else {
-		if(freq + 1000 < sysclk) {
-			if (relation == CPUFREQ_RELATION_L)
-				bclk_div = (sysclk - 1000) / freq;
-			else
-				bclk_div = (sysclk + freq + 1000) / freq;
-
-			if(bclk_div > 16)
-				bclk_div = 16;
-			if(bclk_div < bclk_div_at_boot)
-				bclk_div = bclk_div_at_boot;
-		}
-		freq = (sysclk + bclk_div / 2) / bclk_div;
-	}
-
-	freqs.old = imx_get_speed(0);
-	freqs.new = (freq + 500) / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-
-	imx_set_fastbus_mode();
-
-	imx_set_mpctl0(mpctl0);
-
-	cscr = CSCR;
-	cscr &= ~CSCR_BCLK_DIV;
-	cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
-	CSCR = cscr;
-
-	if(mpctl0) {
-		CSCR |= CSCR_MPLL_RESTART;
-
-		/* Wait until MPLL is stabilized */
-		while( CSCR & CSCR_MPLL_RESTART );
-
-		imx_set_async_mode();
-	}
-
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
-			freq, mpctl0? "MPLL": "SPLL");
-
-	return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = policy->min = policy->max = imx_get_speed(0);
-	policy->cpuinfo.min_freq = 8000;
-	policy->cpuinfo.max_freq = 200000;
-	 /* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
-	return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= imx_verify_speed,
-	.target		= imx_set_target,
-	.get		= imx_get_speed,
-	.init		= imx_cpufreq_driver_init,
-	.name		= "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
-	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
-	mpctl0_at_boot = 0;
-
-	system_clk = clk_get(NULL, "system_clk");
-	if (IS_ERR(system_clk))
-		return PTR_ERR(system_clk);
-
-	mcu_clk = clk_get(NULL, "mcu_clk");
-	if (IS_ERR(mcu_clk)) {
-		clk_put(system_clk);
-		return PTR_ERR(mcu_clk);
-	}
-
-	if((CSCR & CSCR_MPEN) &&
-	   ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
-		mpctl0_at_boot = MPCTL0;
-
-	return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583eece..00000000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/dma.c
- *
- *  imx DMA registration and IRQ dispatching
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- *             initial version heavily inspired by
- *             linux/arch/arm/mach-pxa/dma.c
- *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to support scatter gather DMA
- *             by taking Russell's code from RiscPC
- *
- *  2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned int nextcount;
-	unsigned int nextaddr;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return 0;
-	}
-
-	imxdma->resbytes -= lastcount;
-
-	if (!imxdma->sg) {
-		pr_debug("imxdma%d: no sg data\n", dma_ch);
-		return 0;
-	}
-
-	imxdma->sgbc += lastcount;
-	if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
-		if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
-			pr_debug("imxdma%d: sg transfer limit reached\n",
-				 dma_ch);
-			imxdma->sgcount=0;
-			imxdma->sg = NULL;
-			return 0;
-		} else {
-			imxdma->sgcount--;
-			imxdma->sg++;
-			imxdma->sgbc = 0;
-		}
-	}
-	nextcount = imxdma->sg->length - imxdma->sgbc;
-	nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
-	if(imxdma->resbytes < nextcount)
-		nextcount = imxdma->resbytes;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		DAR(dma_ch) = nextaddr;
-	else
-		SAR(dma_ch) = nextaddr;
-
-	CNTR(dma_ch) = nextcount;
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
-		 dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
-	return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
-		      struct scatterlist *sg, unsigned int sgcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = sg;
-	imxdma->sgcount = sgcount;
-	imxdma->sgbc = 0;
-	return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = dev_addr;
-		DAR(dma_ch) = (unsigned int)dma_address;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = (unsigned int)dma_address;
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	CNTR(dma_ch) = dma_length;
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode)
-{
-	int res;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		SAR(dma_ch) = dev_addr;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
-	if (res <= 0) {
-		printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	DIMR &= ~(1 << dma_ch);
-	CCR(dma_ch) |= CCR_CEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
-	local_irq_save(flags);
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	DISR = (1 << dma_ch);
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (dma_ch >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, dma_ch);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -ENODEV;
-	}
-
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	imxdma->name = NULL;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	for (i = best - 1; i >= 0; i--) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-	struct imx_dma_channel *channel;
-	unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
-	int errcode;
-
-	DISR = disr & err_mask;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if(!(err_mask & (1 << i)))
-			continue;
-		channel = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (DBTOSR & (1 << i)) {
-			DBTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (DRTOSR & (1 << i)) {
-			DRTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (DSESR & (1 << i)) {
-			DSESR = (1 << i);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (DBOSR & (1 << i)) {
-			DBOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-
-		/*
-		 * The cleaning of @sg field would be questionable
-		 * there, because its value can help to compute
-		 * remaining/transferred bytes count in the handler
-		 */
-		/*imx_dma_channels[i].sg = NULL;*/
-
-		if (channel->name && channel->err_handler) {
-			channel->err_handler(i, channel->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, channel->name,
-		       errcode&IMX_DMA_ERR_BURST?    " burst":"",
-		       errcode&IMX_DMA_ERR_REQUEST?  " request":"",
-		       errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
-		       errcode&IMX_DMA_ERR_BUFFER?   " buffer":"");
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	DISR = disr;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i)) {
-			struct imx_dma_channel *channel = &imx_dma_channels[i];
-			if (channel->name) {
-				if (imx_dma_sg_next(i, CNTR(i))) {
-					CCR(i) &= ~CCR_CEN;
-					mb();
-					CCR(i) |= CCR_CEN;
-				} else {
-					if (channel->irq_handler)
-						channel->irq_handler(i,
-							channel->data);
-				}
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
-	int ret;
-	int i;
-
-	/* reset DMA module */
-	DCR = DCR_DRST;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-	}
-
-	/* enable DMA module */
-	DCR = DCR_DEN;
-
-	/* clear all interrupts */
-	DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	/* enable interrupts */
-	DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739ee12..00000000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if(gpio_mode &  GPIO_GIUS)
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		ICONFA1(port) &= ~( 3<<(pin*2));
-		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		ICONFB1(port) &= ~( 3<<(pin*2));
-		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
-		ICONFB2(port) &= ~( 3<<((pin-16)*2));
-		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
-	}
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
-		printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
-			gpio, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
-		printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
-			gpio, label ? label : "?");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32)
-		return;
-
-	clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
-	imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-	imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
-			imx_gpio_free(gpio);
-		else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (imx_gpio_request(gpio, label))
-				if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-					goto setup_error;
-
-		if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    IMX_GPIO_ALLOC_MODE_RELEASE)))
-			imx_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
-		         IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
-
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		imx_gpio_free(gpio);
-	}
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
-	return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIOA(0))
-		return -EINVAL;
-	return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
-	[0] = {
-		.start	= 0x00214000,
-		.end	= 0x002140FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (SDHC_INT),
-		.end	= (SDHC_INT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
-	.name		= "imx-mmc",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &imxmmmc_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imx_mmc_resources),
-	.resource	= imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
-	imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init
-imx_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e4bef..00000000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/generic.h
- *
- * Author:	Sascha Hauer <sascha@saschahauer.de>
- * Copyright:	Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbfe63..00000000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c730f..00000000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679f776..00000000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f8292..00000000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e724c7..00000000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df7f0d..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void *data;
-	unsigned int  dma_mode;
-	struct scatterlist *sg;
-	unsigned int sgbc;
-	unsigned int sgcount;
-	unsigned int resbytes;
-	int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297fc0e3..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART	(1<<22)
-#define CSCR_MPLL_RESTART	(1<<21)
-#define CSCR_SYSTEM_SEL		(1<<16)
-#define CSCR_BCLK_DIV		(0xf<<10)
-#define CSCR_MPU_PRESC		(1<<15)
-#define CSCR_SPEN		(1<<1)
-#define CSCR_MPEN		(1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
-#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
-#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
-#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
-
-#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
-#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
-#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
-#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
-#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
-#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
-#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
-#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
-#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d4802..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5ac1f..00000000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f354dcc..00000000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-	int (*card_present)(struct device *);
-	int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d510eb..00000000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430feec..00000000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67a8f..00000000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95deadc..00000000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/irq.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  03/03/2004   Sascha Hauer <sascha@saschahauer.de>
- *               Copied from the motorola bsp package and added gpio demux
- *               interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF               0x00
-#define NIMASK_OFF                0x04
-#define INTENNUM_OFF              0x08
-#define INTDISNUM_OFF             0x0C
-#define INTENABLEH_OFF            0x10
-#define INTENABLEL_OFF            0x14
-#define INTTYPEH_OFF              0x18
-#define INTTYPEL_OFF              0x1C
-#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
-#define NIVECSR_OFF               0x40
-#define FIVECSR_OFF               0x44
-#define INTSRCH_OFF               0x48
-#define INTSRCL_OFF               0x4C
-#define INTFRCH_OFF               0x50
-#define INTFRCL_OFF               0x54
-#define NIPNDH_OFF                0x58
-#define NIPNDL_OFF                0x5C
-#define FIPNDH_OFF                0x60
-#define FIPNDL_OFF                0x64
-
-#define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...)	printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)	do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int irqt;
-
-	if (irq >= IMX_IRQS)
-		return -EINVAL;
-
-	if (irq < IMX_IRQS / 2) {
-		irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
-	} else {
-		irq -= IMX_IRQS / 2;
-		irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
-	unsigned int irq_type = 0, irq, reg, bit;
-
-	irq = _irq - IRQ_GPIOA(0);
-	reg = irq >> 5;
-	bit = 1 << (irq % 32);
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		   GPIOs set to alternate function during probe */
-		/* TODO: support probe */
-//              if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-//                  GPIO_bit(gpio))
-//                      return 0;
-//              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-//                      return 0;
-//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	GIUS(reg) |= bit;
-	DDIR(reg) &= ~(bit);
-
-	DEBUG_IRQ("setting type of irq %d to ", _irq);
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		DEBUG_IRQ("rising edges\n");
-		irq_type = 0x0;
-	}
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		DEBUG_IRQ("falling edges\n");
-		irq_type = 0x1;
-	}
-	if (type & IRQ_TYPE_LEVEL_LOW) {
-		DEBUG_IRQ("low level\n");
-		irq_type = 0x3;
-	}
-	if (type & IRQ_TYPE_LEVEL_HIGH) {
-		DEBUG_IRQ("high level\n");
-		irq_type = 0x2;
-	}
-
-	if (irq % 32 < 16) {
-		ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	} else {
-		ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	}
-
-	return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	while (mask) {
-		if (mask & 1) {
-			DEBUG_IRQ("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(0);
-	irq = IRQ_GPIOA(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(1);
-	irq = IRQ_GPIOB(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(2);
-	irq = IRQ_GPIOC(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(3);
-	irq = IRQ_GPIOD(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
-	.name = "MPU",
-	.ack = imx_mask_irq,
-	.mask = imx_mask_irq,
-	.unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
-	.name = "GPIO",
-	.ack = imx_gpio_ack_irq,
-	.mask = imx_gpio_mask_irq,
-	.unmask = imx_gpio_unmask_irq,
-	.set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
-	unsigned int irq;
-
-	DEBUG_IRQ("Initializing imx interrupts\n");
-
-	/* Disable all interrupts initially. */
-	/* Do not rely on the bootloader. */
-	__raw_writel(0, IMX_AITC_INTENABLEH);
-	__raw_writel(0, IMX_AITC_INTENABLEL);
-
-	/* Mask all GPIO interrupts as well */
-	IMR(0) = 0;
-	IMR(1) = 0;
-	IMR(2) = 0;
-	IMR(3) = 0;
-
-	for (irq = 0; irq < IMX_IRQS; irq++) {
-		set_irq_chip(irq, &imx_internal_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
-		set_irq_chip(irq, &imx_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
-	/* Release masking of interrupts according to priority */
-	__raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f2762cb..00000000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		DR(0) &= ~(1<<2);
-		break;
-
-	case led_idle_end:
-		DR(0) |= 1<<2;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		DR(0) ^= 1<<2;
-#endif
-	default:
-		break;
-	}
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803e019..00000000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
-	if (machine_is_mx1ads()) {
-		leds_event = mx1ads_leds_event;
-	}
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1da33..00000000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff43b0..00000000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
-	[0] = {
-		.start	= IMX_CS4_PHYS + 0x300,
-		.end	= IMX_CS4_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_GPIOC(17),
-		.end	= IRQ_GPIOC(17),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cs89x0_device = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(cs89x0_resources),
-	.resource	= cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cs89x0_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
-	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
-	return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
-       .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-	/* SD/MMC card detect */
-	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
-	imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
-	imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.boot_params	= 0x08000100,
-	.map_io		= mx1ads_map_io,
-	.init_irq	= imx_init_irq,
-	.timer		= &imx_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b599e..00000000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_imx;
-	uint32_t tstat;
-	irqreturn_t ret = IRQ_NONE;
-
-	/* clear the interrupt */
-	tstat = IMX_TSTAT(TIMER_BASE);
-	IMX_TSTAT(TIMER_BASE) = 0;
-
-	if (tstat & TSTAT_COMP) {
-		evt->event_handler(evt);
-		ret = IRQ_HANDLED;
-	}
-
-	return ret;
-}
-
-static struct irqaction imx_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	IMX_TCTL(TIMER_BASE) = 0;
-	IMX_TPRER(TIMER_BASE) = 0;
-
-	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
-	return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
-	.name 		= "imx_timer1",
-	.rating		= 200,
-	.read		= imx_get_cycles,
-	.mask		= 0xFFFFFFFF,
-	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
-	clocksource_imx.mult =
-		clocksource_hz2mult(rate, clocksource_imx.shift);
-	clocksource_register(&clocksource_imx);
-
-	return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
-				  struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = IMX_TCN(TIMER_BASE) + evt;
-	IMX_TCMP(TIMER_BASE) = tcmp;
-
-	return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call imx_set_next_event()
-	 */
-	local_irq_save(flags);
-	/* Disable interrupt in GPT module */
-	IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
-		/* Clear pending interrupt */
-		IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/*
-		 * Do not put overhead of interrupt enable/disable into
-		 * imx_set_next_event(), the core has about 4 minutes
-		 * to call imx_set_next_event() or shutdown clock after
-		 * mode switching
-		 */
-		local_irq_save(flags);
-		IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appears */
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_imx = {
-	.name		= "imx_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= imx_set_mode,
-	.set_next_event	= imx_set_next_event,
-	.rating		= 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
-	clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
-					clockevent_imx.shift);
-	clockevent_imx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
-	clockevent_imx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_imx);
-
-	clockevent_imx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_imx);
-
-	return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	imx_clocks_init();
-
-	clk = clk_get(NULL, "perclk1");
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	imx_timer_hardware_init();
-	imx_clocksource_init(rate);
-
-	imx_clockevent_init(rate);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
-	.init		= imx_timer_init,
-};
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 6f887291307..a0f60e55da6 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -121,7 +121,7 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b8520..264f4d59f89 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@ config MACH_IXDP465
 	  IXDP465 Development Platform (Also known as BMP).
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_GORAMO_MLR
+	bool "GORAMO Multi Link Router"
+	help
+	  Say 'Y' here if you want your kernel to support GORAMO
+	  MultiLink router.
+
 config MACH_KIXRP435
 	bool "KIXRP435"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf927a7..47d1f60d23f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 00000000000..a733b8ff3ce
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n)		(IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n)		xgpio_irq(n)
+
+#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
+#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
+#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
+#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
+
+#define IRQ_ETHA		IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB		IRQ_IXP4XX_GPIO5
+#define IRQ_NEC			IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI		IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL		0
+#define GPIO_SDA		1
+#define GPIO_STR		2
+#define GPIO_HSS0_DCD_N		6
+#define GPIO_HSS1_DCD_N		7
+#define GPIO_HSS0_CTS_N		10
+#define GPIO_HSS1_CTS_N		11
+#define GPIO_HSS1_RTS_N		13
+#define GPIO_HSS0_RTS_N		14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT	0
+#define CONTROL_HSS1_CLK_INT	1
+#define CONTROL_HSS0_DTR_N	2
+#define CONTROL_HSS1_DTR_N	3
+#define CONTROL_EXT		4
+#define CONTROL_AUTO_RESET	5
+#define CONTROL_PCI_RESET_N	6
+#define CONTROL_EEPROM_WC_N	7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
+#define CFG_REV			0x4C /* u32 */
+#define CFG_SDRAM_SIZE		0x50 /* u32 */
+#define CFG_SDRAM_CONF		0x54 /* u32 */
+#define CFG_SDRAM_MODE		0x58 /* u32 */
+#define CFG_SDRAM_REFRESH	0x5C /* u32 */
+
+#define CFG_HW_BITS		0x60 /* u32 */
+#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define  CFG_HW_HAS_PCI_SLOT	0x00000008
+#define  CFG_HW_HAS_ETH0	0x00000010
+#define  CFG_HW_HAS_ETH1	0x00000020
+#define  CFG_HW_HAS_HSS0	0x00000040
+#define  CFG_HW_HAS_HSS1	0x00000080
+#define  CFG_HW_HAS_UART0	0x00000100
+#define  CFG_HW_HAS_UART1	0x00000200
+#define  CFG_HW_HAS_EEPROM	0x00000400
+
+#define FLASH_CMD_READ_ARRAY	0xFF
+#define FLASH_CMD_READ_ID	0x90
+#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+	gpio_line_set(GPIO_SCL, !!value);
+	udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+	gpio_line_set(GPIO_SDA, !!value);
+	udelay(3);
+}
+
+static void set_str(u8 value)
+{
+	gpio_line_set(GPIO_STR, !!value);
+	udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+	if (value)
+		control_value |=  (1 << line);
+	else
+		control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+	int i;
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+	for (i = 0; i < 8; i++) {
+		set_scl(0);
+		set_sda(control_value & (0x80 >> i)); /* MSB first */
+		set_scl(1);	/* active edge */
+	}
+
+	set_str(1);
+	set_str(0);
+
+	set_scl(0);
+	set_sda(1);		/* Be ready for START */
+	set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+	switch (clock_type) {
+	case CLOCK_DEFAULT:
+	case CLOCK_EXT:
+		set_control(ctrl_int, 0);
+		output_control();
+		return CLOCK_EXT;
+
+	case CLOCK_INT:
+		set_control(ctrl_int, 1);
+		output_control();
+		return CLOCK_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+	int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb_tab[port](pdev, !i);
+	return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier))
+{
+	int i, irq;
+
+	if (!port)
+		irq = gpio_irq(GPIO_HSS0_DCD_N);
+	else
+		irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb(pdev, !i);
+
+	set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+		       irq, i);
+		return i;
+	}
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+	free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+		 pdev);
+	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= { .platform_data = &flash_data },
+	.num_resources	= 1,
+	.resource	= &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+	.sda_pin	= GPIO_SDA,
+	.scl_pin	= GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device device_uarts = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= uart_data,
+	.num_resources		= 2,
+	.resource		= uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 32,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 33,
+	}
+};
+
+static struct platform_device device_eth_tab[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= eth_plat,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= eth_plat + 1,
+	}
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+	{
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 34,
+	}, {
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 35,
+	}
+};
+
+static struct platform_device device_hss_tab[] = {
+	{
+		.name			= "ixp4xx_hss",
+		.id			= 0,
+		.dev.platform_data	= hss_plat,
+	}, {
+		.name			= "ixp4xx_hss",
+		.id			= 1,
+		.dev.platform_data	= hss_plat + 1,
+	}
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+	&device_flash,		/* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readb(flash + addr);
+#else
+	return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readw(flash + addr);
+#else
+	return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+	u8 __iomem *flash;
+	int i, devices = 1; /* flash */
+
+	ixp4xx_sys_init();
+
+	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+		printk(KERN_ERR "goramo-mlr: unable to access system"
+		       " configuration data\n");
+	else {
+		system_rev = __raw_readl(flash + CFG_REV);
+		hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+		for (i = 0; i < ETH_ALEN; i++) {
+			eth_plat[0].hwaddr[i] =
+				flash_readb(flash, CFG_ETH0_ADDRESS + i);
+			eth_plat[1].hwaddr[i] =
+				flash_readb(flash, CFG_ETH1_ADDRESS + i);
+		}
+
+		__raw_writew(FLASH_CMD_READ_ID, flash);
+		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+		system_serial_high <<= 16;
+		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+		system_serial_low <<= 16;
+		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+		iounmap(flash);
+	}
+
+	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+	case CFG_HW_HAS_UART0:
+		memset(&uart_data[1], 0, sizeof(uart_data[1]));
+		device_uarts.num_resources = 1;
+		break;
+
+	case CFG_HW_HAS_UART1:
+		device_uarts.dev.platform_data = &uart_data[1];
+		device_uarts.resource = &uart_resources[1];
+		device_uarts.num_resources = 1;
+		break;
+	}
+	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+		device_tab[devices++] = &device_uarts; /* max index 1 */
+
+	if (hw_bits & CFG_HW_HAS_ETH0)
+		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+	if (hw_bits & CFG_HW_HAS_ETH1)
+		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+	if (hw_bits & CFG_HW_HAS_HSS0)
+		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+	if (hw_bits & CFG_HW_HAS_HSS1)
+		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+	if (hw_bits & CFG_HW_HAS_EEPROM)
+		device_tab[devices++] = &device_i2c; /* max index 6 */
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+	set_control(CONTROL_HSS0_DTR_N, 1);
+	set_control(CONTROL_HSS1_DTR_N, 1);
+	set_control(CONTROL_EEPROM_WC_N, 1);
+	set_control(CONTROL_PCI_RESET_N, 1);
+	output_control();
+
+	msleep(1);	      /* Wait for PCI devices to initialize */
+
+	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+	set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
+		/* need to adjust number of USB ports on NEC chip */
+		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+			value &= ~7;
+			value |= (hw_bits & CFG_HW_USB_PORTS);
+			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+		}
+	}
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	switch(slot) {
+	case SLOT_ETHA:	return IRQ_ETHA;
+	case SLOT_ETHB:	return IRQ_ETHB;
+	case SLOT_NEC:	return IRQ_NEC;
+	default:	return IRQ_MPCI;
+	}
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= gmlr_pci_preinit,
+	.postinit	= gmlr_pci_postinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+	if (machine_is_goramo_mlr() &&
+	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+		pci_common_init(&gmlr_hw_pci);
+	return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+	/* Maintainer: Krzysztof Halasa */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773be67..b2ef65db0e9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
 #define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
 #define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
 
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+				IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
 			 IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~*IXP4XX_EXP_CFG2;
 
+	if (cpu_is_ixp42x_rev_a0())
+		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+					       IXP4XX_FEATURE_AES);
 	if (cpu_is_ixp42x())
 		return val & IXP42X_FEATURE_MASK;
 	if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ceb67c..9e7cad2d54c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
 #define DEBUG_QMGR	0
 
 #define HALF_QUEUES	32
-#define QUEUES		64	/* only 32 lower queues currently supported */
+#define QUEUES		64
 #define MAX_QUEUE_LENGTH 4	/* in dwords */
 
 #define QUEUE_STAT1_EMPTY		1 /* queue status bits */
@@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue)
 	return val;
 }
 
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
+	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
 }
 
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
 static inline int qmgr_stat_empty(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statne_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
 }
 
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statf_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
 }
 
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
 static inline int qmgr_stat_underflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
 }
 
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
 static inline int qmgr_stat_overflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
 }
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e778e4b..47ac69c7ec7 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe)
 	/* reset the NPE */
 	ixp4xx_write_feature_bits(val &
 				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (!(ixp4xx_read_feature_bits() &
-		      (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-			break;	/* reset completed */
-		udelay(1);
-	}
-	if (i == MAX_RETRIES)
-		return -ETIMEDOUT;
-
 	/* deassert reset */
 	ixp4xx_write_feature_bits(val |
 				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73d0a2..bfdbe4b5a3c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
 
 #if DEBUG_QMGR
 char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32];
 void qmgr_set_irq(unsigned int queue, int src,
 		  void (*handler)(void *pdev), void *pdev)
 {
-	u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-	int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
 	unsigned long flags;
 
-	src &= 7;
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+	if (queue < HALF_QUEUES) {
+		u32 __iomem *reg;
+		int bit;
+		BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+		reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+		bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+		__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+			     reg);
+	} else
+		/* IRQ source for queues 32-63 is fixed */
+		BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
 	irq_handlers[queue] = handler;
 	irq_pdevs[queue] = pdev;
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
 {
-	int i;
-	u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-	__raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
-	for (i = 0; i < HALF_QUEUES; i++)
-		if (val & (1 << i))
+	int i, ret = 0;
+	u32 en_bitmap, src, stat;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+	en_bitmap = qmgr_regs->irqen[0];
+	while (en_bitmap) {
+		i = __fls(en_bitmap); /* number of the last "low" queue */
+		en_bitmap &= ~BIT(i);
+		src = qmgr_regs->irqsrc[i >> 3];
+		stat = qmgr_regs->stat1[i >> 3];
+		if (src & 4) /* the IRQ condition is inverted */
+			stat = ~stat;
+		if (stat & BIT(src & 3)) {
 			irq_handlers[i](irq_pdevs[i]);
+			ret = IRQ_HANDLED;
+		}
+	}
+	return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+	int i, ret = 0;
+	u32 req_bitmap;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+	req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last "high" queue */
+		req_bitmap &= ~BIT(i);
+		irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
 
-	return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+	int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+	u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+	if (!req_bitmap)
+		return 0;
+	__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last queue */
+		req_bitmap &= ~BIT(i);
+		i += half * HALF_QUEUES;
+		irq_handlers[i](irq_pdevs[i]);
+	}
+	return IRQ_HANDLED;
 }
 
 
 void qmgr_enable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-		     &qmgr_regs->irqen[0]);
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+		     &qmgr_regs->irqen[half]);
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 void qmgr_disable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-		     &qmgr_regs->irqen[0]);
-	__raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+		     &qmgr_regs->irqen[half]);
+	__raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
@@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
 	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
 	int err;
 
-	if (queue >= HALF_QUEUES)
-		return -ERANGE;
+	BUG_ON(queue >= QUEUES);
 
 	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
 		return -EINVAL;
@@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue)
 {
 	u32 cfg, addr, mask[4];
 
-	BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+	BUG_ON(queue >= QUEUES); /* not in valid range */
 
 	spin_lock_irq(&qmgr_lock);
 	cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue)
 static int qmgr_init(void)
 {
 	int i, err;
+	irq_handler_t handler1, handler2;
+
 	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
 				     IXP4XX_QMGR_REGION_SIZE,
 				     "IXP4xx Queue Manager");
@@ -247,23 +309,42 @@ static int qmgr_init(void)
 		__raw_writel(0, &qmgr_regs->irqen[i]);
 	}
 
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+	__raw_writel(0, &qmgr_regs->statf_h);
+
 	for (i = 0; i < QUEUES; i++)
 		__raw_writel(0, &qmgr_regs->sram[i]);
 
-	err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-			  "IXP4xx Queue Manager", NULL);
+	if (cpu_is_ixp42x_rev_a0()) {
+		handler1 = qmgr_irq1_a0;
+		handler2 = qmgr_irq2_a0;
+	} else
+		handler1 = handler2 = qmgr_irq;
+
+	err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+			  NULL);
 	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-		       IRQ_IXP4XX_QM1);
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM1, err);
 		goto error_irq;
 	}
 
+	err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+			  NULL);
+	if (err) {
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM2, err);
+		goto error_irq2;
+	}
+
 	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
 	spin_lock_init(&qmgr_lock);
 
 	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
 	return 0;
 
+error_irq2:
+	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
 	iounmap(qmgr_regs);
 error_map:
@@ -274,7 +355,9 @@ error_map:
 static void qmgr_remove(void)
 {
 	free_irq(IRQ_IXP4XX_QM1, NULL);
+	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
+	synchronize_irq(IRQ_IXP4XX_QM2);
 	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b5421cccd7e..25100f7acf4 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
+config MACH_MV88F6281GTW_GE
+	bool "Marvell 88F6281 GTW GE Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell 88F6281 GTW GE Board.
+
 config MACH_SHEEVAPLUG
 	bool "Marvell SheevaPlug Reference Board"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8f03c9b9bdd..9dd680e964d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,5 +3,8 @@ obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 5db4f0bbe5e..1da5d1c18ec 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -20,6 +20,7 @@
  */
 #define TARGET_DDR		0
 #define TARGET_DEV_BUS		1
+#define TARGET_SRAM		3
 #define TARGET_PCIE		4
 #define ATTR_DEV_SPI_ROM	0x1e
 #define ATTR_DEV_BOOT		0x1d
@@ -30,6 +31,7 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_SRAM		0x01
 
 /*
  * Helpers to get DDR bank info
@@ -48,7 +50,6 @@
 
 
 struct mbus_dram_target_info kirkwood_mbus_dram_info;
-static int __initdata win_alloc_count;
 
 static int __init cpu_win_can_remap(int win)
 {
@@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
-	win_alloc_count = 3;
+	/*
+	 * Setup window for SRAM.
+	 */
+	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
 	 * Setup MBUS dram target info.
@@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void)
 	}
 	kirkwood_mbus_dram_info.num_cs = cs;
 }
-
-void __init kirkwood_setup_sram_win(u32 base, u32 size)
-{
-	setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index eeb00240d78..0f691983801 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/page.h>
@@ -29,6 +30,7 @@
 #include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
 	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
+/*
+ * Default clock control bits.  Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered.  Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+	
 
 /*****************************************************************************
  * EHCI
@@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
 
 void __init kirkwood_ehci_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_USB0;
 	platform_device_register(&kirkwood_ehci);
 }
 
@@ -144,10 +154,14 @@ static struct platform_device kirkwood_ge00 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= kirkwood_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE0;
 	eth_data->shared = &kirkwood_ge00_shared;
 	kirkwood_ge00.dev.platform_data = eth_data;
 
@@ -202,10 +216,14 @@ static struct platform_device kirkwood_ge01 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= kirkwood_ge01_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE1;
 	eth_data->shared = &kirkwood_ge01_shared;
 	kirkwood_ge01.dev.platform_data = eth_data;
 
@@ -252,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 
 /*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+				KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_nand_data,
+	},
+	.resource	= &kirkwood_nand_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+			       int chip_delay)
+{
+	kirkwood_clk_ctrl |= CGC_RUNIT;
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.chip_delay = chip_delay;
+	platform_device_register(&kirkwood_nand_flash);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
@@ -295,6 +350,9 @@ static struct platform_device kirkwood_sata = {
 
 void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 {
+	kirkwood_clk_ctrl |= CGC_SATA0;
+	if (sata_data->n_ports > 1)
+		kirkwood_clk_ctrl |= CGC_SATA1;
 	sata_data->dram = &kirkwood_mbus_dram_info;
 	kirkwood_sata.dev.platform_data = sata_data;
 	platform_device_register(&kirkwood_sata);
@@ -340,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 	else
 		mvsdio_data->clock = 200000000;
 	mvsdio_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_clk_ctrl |= CGC_SDIO;
 	kirkwood_sdio.dev.platform_data = mvsdio_data;
 	platform_device_register(&kirkwood_sdio);
 }
@@ -371,6 +430,7 @@ static struct platform_device kirkwood_spi = {
 
 void __init kirkwood_spi_init()
 {
+	kirkwood_clk_ctrl |= CGC_RUNIT;
 	platform_device_register(&kirkwood_spi);
 }
 
@@ -386,12 +446,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
 
 static struct resource kirkwood_i2c_resources[] = {
 	{
-		.name	= "i2c",
 		.start	= I2C_PHYS_BASE,
 		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.name	= "i2c",
 		.start	= IRQ_KIRKWOOD_TWSI,
 		.end	= IRQ_KIRKWOOD_TWSI,
 		.flags	= IORESOURCE_IRQ,
@@ -503,6 +561,43 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = CRYPTO_PHYS_BASE,
+		.end    = CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = KIRKWOOD_SRAM_PHYS_BASE,
+		.end    = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_KIRKWOOD_CRYPTO,
+		.end    = IRQ_KIRKWOOD_CRYPTO,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(kirkwood_crypto_res),
+	.resource       = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_CRYPTO;
+	platform_device_register(&kirkwood_crypto_device);
+}
+
+
+/*****************************************************************************
  * XOR
  ****************************************************************************/
 static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
@@ -593,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
 
 static void __init kirkwood_xor0_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR0;
 	platform_device_register(&kirkwood_xor0_shared);
 
 	/*
@@ -691,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
 
 static void __init kirkwood_xor1_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR1;
 	platform_device_register(&kirkwood_xor1_shared);
 
 	/*
@@ -709,6 +806,29 @@ static void __init kirkwood_xor1_init(void)
 
 
 /*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+	.tclk		= 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_wdt_data,
+	},
+	.num_resources	= 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+	kirkwood_wdt_data.tclk = kirkwood_tclk;
+	platform_device_register(&kirkwood_wdt_device);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 int kirkwood_tclk;
@@ -800,6 +920,49 @@ void __init kirkwood_init(void)
 
 	/* internal devices that every board has */
 	kirkwood_rtc_init();
+	kirkwood_wdt_init();
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
+	kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+	unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+	printk(KERN_DEBUG "Gating clock of unused units\n");
+	printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+	/* Make sure those units are accessible */
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+	/* For SATA: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+	}
+	if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+	}
+	
+	/* For PCIe: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+		writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+		while (1)
+			if (readl(PCIE_STATUS) & 0x1)
+				break;
+		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+	}
+
+	/* Now gate clock the required units */
+	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+	return 0;
 }
+late_initcall(kirkwood_clock_gate);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6ee88406f38..d7de4346435 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -15,6 +15,7 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 struct mvsdio_platform_data;
+struct mtd_partition;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -25,7 +26,6 @@ void kirkwood_init_irq(void);
 
 extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
 void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_sram_win(u32 base, u32 size);
 
 void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
@@ -40,9 +40,11 @@ void kirkwood_spi_init(void);
 void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
new file mode 100644
index 00000000000..f68d33f1f39
--- /dev/null
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES	2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+	.name =         "kirkwood_idle",
+	.owner =        THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		/*
+		 * Following write will put DDR in self refresh.
+		 * Note that we have 256 cycles before DDR puts it
+		 * self in self-refresh, so the wait-for-interrupt
+		 * call afterwards won't get the DDR from self refresh
+		 * mode.
+		 */
+		writel(0x7, DDR_OPERATION_BASE);
+		cpu_do_idle();
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&kirkwood_idle_driver);
+
+	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+	device->state_count = KIRKWOOD_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = kirkwood_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	device->states[1].enter = kirkwood_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "DDR SR");
+	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 5505d583775..39bdf4bcace 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,14 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/orion_nand.h>
 #include <plat/mvsdio.h>
 #include "common.h"
 #include "mpp.h"
@@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource db88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data db88f6281_nand_data = {
-	.parts		= db88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device db88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f6281_nand_data,
-	},
-	.resource	= &db88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
@@ -92,13 +64,12 @@ static void __init db88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(db88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
 	kirkwood_sdio_init(&db88f6281_mvsdio_data);
-	
-	platform_device_register(&db88f6281_nand_flash);
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 4f7029f521c..9e80d9232c8 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -17,12 +17,15 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define WDT_INT_REQ		0x0008
+
 #define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
 #define BRIDGE_INT_TIMER0	0x0002
 #define BRIDGE_INT_TIMER1	0x0004
@@ -39,4 +42,22 @@
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_GE0			(1 << 0)
+#define CGC_PEX0		(1 << 2)
+#define CGC_USB0		(1 << 3)
+#define CGC_SDIO		(1 << 4)
+#define CGC_TSU			(1 << 5)
+#define CGC_DUNIT		(1 << 6)
+#define CGC_RUNIT		(1 << 7)
+#define CGC_XOR0		(1 << 8)
+#define CGC_AUDIO		(1 << 9)
+#define CGC_SATA0		(1 << 14)
+#define CGC_SATA1		(1 << 15)
+#define CGC_XOR1		(1 << 16)
+#define CGC_CRYPTO		(1 << 17)
+#define CGC_GE1			(1 << 19)
+#define CGC_TDM			(1 << 20)
+#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index be07be0ef52..a643a846d5f 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
+	    size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
+		retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
 #define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index b3e13958821..07af858814a 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -20,16 +20,18 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f3000000	NAND controller address window
+ * f4000000	Security Accelerator SRAM
  *
  * virt		phys		size
  * fee00000	f1000000	1M	on-chip peripheral registers
  * fef00000	f2000000	1M	PCIe I/O space
  */
 
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_SIZE		SZ_2K
+
 #define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
 #define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
@@ -48,6 +50,7 @@
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
 
 #define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@@ -63,7 +66,11 @@
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
 
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -80,6 +87,11 @@
 #define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 63c44934391..a5900f64e38 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	if (!variant_mask)
 		return;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	printk(KERN_DEBUG "initial MPP regs:");
 	for (i = 0; i < MPP_NR_REGS; i++) {
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644
index 00000000000..0358f45766c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+	.type		= "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 47,
+		.desc		= "SWR Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_F1,
+		.gpio		= 46,
+		.desc		= "WPS Button(F1)",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+	.buttons	= mv88f6281gtw_ge_button_pins,
+	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv88f6281gtw_ge_button_data,
+	},
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+	{
+		.name		= "gtw:green:Status",
+		.gpio		= 20,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:red:Status",
+		.gpio		= 21,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:green:USB",
+		.gpio		= 12,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+	.leds		= mv88f6281gtw_ge_led_pins,
+	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv88f6281gtw_ge_led_data,
+	},
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+	MPP12_GPO,	/* Status#_USB pin  */
+	MPP20_GPIO,	/* Status#_GLED pin */
+	MPP21_GPIO,	/* Status#_RLED pin */
+	MPP46_GPIO,	/* WPS_Switch pin   */
+	MPP47_GPIO,	/* SW_Init pin      */
+	0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+	platform_device_register(&mv88f6281gtw_ge_leds);
+	platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+	if (machine_is_mv88f6281gtw_ge())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= mv88f6281gtw_ge_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 73fccacd1a7..d90b9aae308 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -14,6 +14,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 
 
@@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = {
 static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
+	extern unsigned int kirkwood_clk_ctrl;
 
 	/*
 	 * Generic PCIe unit setup.
@@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
+	kirkwood_clk_ctrl |= CGC_PEX0;
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 2f0e4ef3db0..8bf4153d084 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,8 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/flash.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31e996d65fc..31708ddbc83 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
@@ -22,7 +21,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource rd88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data rd88f6281_nand_data = {
-	.parts		= rd88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(rd88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device rd88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &rd88f6281_nand_data,
-	},
-	.resource	= &rd88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
@@ -114,6 +86,7 @@ static void __init rd88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
@@ -129,8 +102,6 @@ static void __init rd88f6281_init(void)
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
-
-	platform_device_register(&rd88f6281_nand_flash);
 }
 
 static int __init rd88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 831e4a56cae..c7319eeac8b 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -20,7 +19,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = {
 	},
 };
 
-static struct resource sheevaplug_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data sheevaplug_nand_data = {
-	.parts		= sheevaplug_nand_parts,
-	.nr_parts	= ARRAY_SIZE(sheevaplug_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device sheevaplug_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sheevaplug_nand_data,
-	},
-	.resource	= &sheevaplug_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	// unfortunately the CD signal has not been connected */
+	/* unfortunately the CD signal has not been connected */
 };
 
 static struct gpio_led sheevaplug_led_pins[] = {
@@ -111,6 +83,7 @@ static void __init sheevaplug_init(void)
 	kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
@@ -120,7 +93,6 @@ static void __init sheevaplug_init(void)
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
 	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
-	platform_device_register(&sheevaplug_nand_flash);
 	platform_device_register(&sheevaplug_leds);
 }
 
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index dda5743cf3e..01aa213c0a6 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP1_SPI_MOSI,
 	MPP2_SPI_SCK,
 	MPP3_SPI_MISO,
+	MPP4_SATA1_ACTn,
+	MPP5_SATA0_ACTn,
 	MPP8_TW_SDA,
 	MPP9_TW_SCK,
 	MPP10_UART0_TXD,
@@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_SATA1_PRESENTn,
-	MPP23_SATA0_PRESENTn,
 	0
 };
 
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
index 2d7722be60e..e9729a35751 100644
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -18,7 +18,7 @@
 
 /* IO_START and IO_BASE are defined in hardware.h */
 
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
 #define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
 
 /* Define the interface to the SYS_CLOCK */
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index c0d2d9d12e7..818f19d7ab1 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= loki_ge0_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= loki_ge1_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index e83e45ebf7a..16295cfd5e2 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -52,6 +52,7 @@
 /*
  * Interrupt numbers for PXA910
  */
+#define IRQ_PXA910_NONE			(-1)
 #define IRQ_PXA910_AIRQ			0
 #define IRQ_PXA910_SSP3			1
 #define IRQ_PXA910_SSP2			2
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index d0bdb6e3682..3b216bf41e7 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -3,6 +3,11 @@
 
 #include <mach/mfp.h>
 
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x1 << 13)
+#define MFP_DRIVE_MEDIUM	(0x2 << 13)
+#define MFP_DRIVE_FAST		(0x3 << 13)
+
 /* GPIO */
 #define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
 #define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
@@ -248,6 +253,10 @@
 #define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
 #define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
 
+/* I2C */
+#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
+#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
+
 /* I2S */
 #define GPIO113_I2S_MCLK	MFP_CFG(GPIO113,AF6)
 #define GPIO114_I2S_FRM		MFP_CFG(GPIO114,AF1)
@@ -255,4 +264,27 @@
 #define GPIO116_I2S_RXD		MFP_CFG(GPIO116,AF2)
 #define GPIO117_I2S_TXD		MFP_CFG(GPIO117,AF2)
 
+/* PWM */
+#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
+#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
+#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
+#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
+#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
+#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
+#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
+#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
+#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
+#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
+#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
+#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
+#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
+#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
+#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
+#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
+#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
+#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
+#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
+#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
+#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index 48a1cbc7c56..bf1189ff9a3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -3,6 +3,11 @@
 
 #include <mach/mfp.h>
 
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
 /* UART2 */
 #define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
 #define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
@@ -154,4 +159,12 @@
 #define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
+/* PWM */
+#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
+#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
+#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
+#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
+#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
+
 #endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h
index 277ea4cd0f9..62e510e80a5 100644
--- a/arch/arm/mach-mmp/include/mach/mfp.h
+++ b/arch/arm/mach-mmp/include/mach/mfp.h
@@ -12,16 +12,13 @@
  * possible, we make the following compromise:
  *
  * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ *    - the reserved bit differs between pxa168 and pxa910, and the
+ *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
  * 3. Override MFP_CFG() and MFP_CFG_DRV()
  * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
  */
 
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x8 << 13)
-
 #undef MFP_CFG
 #undef MFP_CFG_DRV
 #undef MFP_CFG_LPM
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index ef0a8a2076e..6bf1f0eefcd 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_twsi0;
+extern struct pxa_device_desc pxa168_device_twsi1;
+extern struct pxa_device_desc pxa168_device_pwm1;
+extern struct pxa_device_desc pxa168_device_pwm2;
+extern struct pxa_device_desc pxa168_device_pwm3;
+extern struct pxa_device_desc pxa168_device_pwm4;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa168_device_twsi0; break;
+	case 1: d = &pxa168_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa168_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_pwm1; break;
+	case 2: d = &pxa168_device_pwm2; break;
+	case 3: d = &pxa168_device_pwm3; break;
+	case 4: d = &pxa168_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b7aeaf574c3..6ae1ed7a0a9 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
+extern struct pxa_device_desc pxa910_device_twsi0;
+extern struct pxa_device_desc pxa910_device_twsi1;
+extern struct pxa_device_desc pxa910_device_pwm1;
+extern struct pxa_device_desc pxa910_device_pwm2;
+extern struct pxa_device_desc pxa910_device_pwm3;
+extern struct pxa_device_desc pxa910_device_pwm4;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa910_device_twsi0; break;
+	case 1: d = &pxa910_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa910_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa910_device_pwm1; break;
+	case 2: d = &pxa910_device_pwm2; break;
+	case 3: d = &pxa910_device_pwm3; break;
+	case 4: d = &pxa910_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index c6b8c9dc202..98ccbee4bd0 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -22,8 +22,10 @@
 #define APBC_PXA168_UART1	APBC_REG(0x000)
 #define APBC_PXA168_UART2	APBC_REG(0x004)
 #define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM0	APBC_REG(0x00c)
-#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_PWM1	APBC_REG(0x00c)
+#define APBC_PXA168_PWM2	APBC_REG(0x010)
+#define APBC_PXA168_PWM3	APBC_REG(0x014)
+#define APBC_PXA168_PWM4	APBC_REG(0x018)
 #define APBC_PXA168_SSP1	APBC_REG(0x01c)
 #define APBC_PXA168_SSP2	APBC_REG(0x020)
 #define APBC_PXA168_RTC		APBC_REG(0x028)
@@ -48,10 +50,10 @@
 #define APBC_PXA910_UART0	APBC_REG(0x000)
 #define APBC_PXA910_UART1	APBC_REG(0x004)
 #define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM0	APBC_REG(0x00c)
-#define APBC_PXA910_PWM1	APBC_REG(0x010)
-#define APBC_PXA910_PWM2	APBC_REG(0x014)
-#define APBC_PXA910_PWM3	APBC_REG(0x018)
+#define APBC_PXA910_PWM1	APBC_REG(0x00c)
+#define APBC_PXA910_PWM2	APBC_REG(0x010)
+#define APBC_PXA910_PWM3	APBC_REG(0x014)
+#define APBC_PXA910_PWM4	APBC_REG(0x018)
 #define APBC_PXA910_SSP1	APBC_REG(0x01c)
 #define APBC_PXA910_SSP2	APBC_REG(0x020)
 #define APBC_PXA910_IPC		APBC_REG(0x024)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ae924468658..71b1ae33875 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,11 +65,23 @@ void __init pxa168_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
 static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = {
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 453f8f7758b..5882ca6b49f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -103,11 +103,23 @@ void __init pxa910_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
 static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = {
  */
 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
+PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index b03a6eda741..a8400bb891e 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
 	.set_mode	= timer_set_mode,
 };
 
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
 {
 	return timer_read();
 }
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 9ba595083da..1b22e4af879 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge01_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
 	.id		= 2,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge10_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
 	.id		= 3,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge11_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
@@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
 
 static struct resource mv78xx0_i2c_0_resources[] = {
 	{
-		.name   = "i2c 0 base",
 		.start  = I2C_0_PHYS_BASE,
 		.end    = I2C_0_PHYS_BASE + 0x1f,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.name   = "i2c 0 irq",
 		.start  = IRQ_MV78XX0_I2C_0,
 		.end    = IRQ_MV78XX0_I2C_0,
 		.flags  = IORESOURCE_IRQ,
@@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
 
 static struct resource mv78xx0_i2c_1_resources[] = {
 	{
-		.name   = "i2c 1 base",
 		.start  = I2C_1_PHYS_BASE,
 		.end    = I2C_1_PHYS_BASE + 0x1f,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.name   = "i2c 1 irq",
 		.start  = IRQ_MV78XX0_I2C_1,
 		.end    = IRQ_MV78XX0_I2C_1,
 		.flags  = IORESOURCE_IRQ,
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index f289b0ea7dc..22b4ff893b3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void)
 {
 	int i;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f300ff..7622c9b38c9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/common.h>
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = {
 	}
 };
 
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX1);
+
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057fb855..e5b0c0a83c3 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
 #include <mach/i2c.h>
+#include <mach/imx-uart.h>
 #include <mach/iomux.h>
+#include <mach/irqs.h>
+
 #include "devices.h"
 
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+	/* UART1 */
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
 	PC11_PF_UART1_TXD,
 	PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
+	/* UART2 */
 	PB28_PF_UART2_CTS,
 	PB29_PF_UART2_RTS,
 	PB30_PF_UART2_TXD,
 	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+	/* SPI */
+	PC13_PF_SPI1_SPI_RDY,
+	PC14_PF_SPI1_SCLK,
+	PC15_PF_SPI1_SS,
+	PC16_PF_SPI1_MISO,
+	PC17_PF_SPI1_MOSI,
 };
 
-static int uart2_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
+/*
+ * UARTs platform data
+ */
 
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart1_mxc_init,
-		.exit = uart1_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart2_mxc_init,
-		.exit = uart2_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
@@ -111,24 +90,6 @@ static struct platform_device flash_device = {
 /*
  * I2C
  */
-
-static int i2c_pins[] = {
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins));
-}
-
 static struct pcf857x_platform_data pcf857x_data[] = {
 	{
 		.gpio_base = 4 * 32,
@@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 
 static struct imxi2c_platform_data mx1ads_i2c_data = {
 	.bitrate = 100000,
-	.init = i2c_init,
-	.exit = i2c_exit,
 };
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+	mxc_gpio_setup_multiple_pins(mx1ads_pins,
+		ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
 	/* UART */
 	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
 	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
@@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3fa28b..20e0b5bcdff 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.phys_io	= 0x00200000,
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a788842f4..c77da586b71 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@ endchoice
 
 comment "MX2 platforms:"
 
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	depends on MACH_MX21
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_MX27ADS
 	bool "MX27ADS platform"
 	depends on MACH_MX27
@@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a9154..b9b1cca4e9b 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
 obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 999d013e06e..0850fb88ec1 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+			unsigned long rate,
+			u32 max_divisor)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > max_divisor)
+		div = max_divisor;
+
+	return parent_rate / div;
+}
+
 static int _clk_spll_enable(struct clk *clk)
 {
 	u32 reg;
@@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk)
 static unsigned long _clk_perclkx_round_rate(struct clk *clk,
 					     unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 64);
 }
 
 static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
@@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk)
 	return parent_rate / (usb_pdf + 1U);
 }
 
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = CSCR() & ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
 static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
 {
 	unsigned long parent_rate;
@@ -595,11 +628,14 @@ static struct clk csi_clk[] = {
 static struct clk usb_clk[] = {
 	{
 		.parent = &spll_clk,
+		.secondary = &usb_clk[1],
 		.get_rate = _clk_usb_recalc,
 		.enable = _clk_enable,
 		.enable_reg = CCM_PCCR_USBOTG_REG,
 		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
 		.disable = _clk_disable,
+		.round_rate = _clk_usb_round_rate,
+		.set_rate = _clk_usb_set_rate,
 	}, {
 		.parent = &hclk_clk,
 		.enable = _clk_enable,
@@ -768,18 +804,7 @@ static struct clk rtc_clk = {
 
 static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		div = 8;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 8);
 }
 
 static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
@@ -890,7 +915,7 @@ static struct clk clko_clk = {
 		.con_id = n, \
 		.clk = &c, \
 	},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 /* It's unlikely that any driver wants one of them directly:
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
 	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
@@ -921,7 +946,7 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 3f7280c490f..2c971442f3f 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd04948..169372f69d8 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX21);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+void __init mx27_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 00000000000..a5ee461cb40
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+	/* CS8900A */
+	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+
+	/* UART3 (IrDA) - only TXD and RXD */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+
+	/* LCDC */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA24_PF_REV,     /* Sharp panel dedicated signal */
+	PA25_PF_CLS,     /* Sharp panel dedicated signal */
+	PA26_PF_PS,      /* Sharp panel dedicated signal */
+	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+
+	/* MMC/SDHC */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+
+	/* NFC */
+	PF0_PF_NRFB,
+	PF1_PF_NFCE,
+	PF2_PF_NFWP,
+	PF3_PF_NFCLE,
+	PF4_PF_NFALE,
+	PF5_PF_NFRE,
+	PF6_PF_NFWE,
+	PF7_PF_NFIO0,
+	PF8_PF_NFIO1,
+	PF9_PF_NFIO2,
+	PF10_PF_NFIO3,
+	PF11_PF_NFIO4,
+	PF12_PF_NFIO5,
+	PF13_PF_NFIO6,
+	PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+	.width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+	.start = CS0_BASE_ADDR,
+	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx21ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp |= MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+	return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp &= ~MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.pixclock       = 188679, /* in ps */
+	.xres           = 240,
+	.yres           = 320,
+
+	.bpp            = 16,
+	.hsync_len      = 2,
+	.left_margin    = 6,
+	.right_margin   = 16,
+
+	.vsync_len      = 1,
+	.upper_margin   = 8,
+	.lower_margin   = 10,
+	.fixed_screen_cpu = 0,
+
+	.pcr            = 0xFB108BC7,
+	.pwmr           = 0x00A901ff,
+	.lscr1          = 0x00120300,
+	.dmacr          = 0x00020008,
+
+	.init = mx21ads_fb_init,
+	.exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+	void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+	.get_ro = mx21ads_sdhc_get_ro,
+	.init = mx21ads_sdhc_init,
+	.exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+	/*
+	 * Memory-mapped I/O on MX21ADS Base board:
+	 *   - CS8900A Ethernet controller
+	 *   - ST16C2552CJ UART
+	 *   - CPU and Base board version
+	 *   - Base board I/O register
+	 */
+	{
+		.virtual = MX21ADS_MMIO_BASE_ADDR,
+		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.length = MX21ADS_MMIO_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx21ads_map_io(void)
+{
+	mx21_map_io();
+	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+			"mx21ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+	mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+	.init	= mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx21ads_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx21ads_board_init,
+	.timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097adc1..02daddac699 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,9 +35,117 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
 	.width = 2,
@@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = {
 	.resource = &mx27ads_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+	.bitrate = 100000,
 };
 
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
 };
 
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.pixclock	= 188679,
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 9,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFB008BC0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
 };
 
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
 }
 
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
 }
 
-static int mxc_uart3_pins[] = {
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins), "UART3");
+	free_irq(IRQ_GPIOE(21), data);
 }
 
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins));
-	return 0;
+	free_irq(IRQ_GPIOB(7), data);
 }
 
-static int mxc_uart4_pins[] = {
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
 };
 
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins));
-	return 0;
-}
-
-static int mxc_uart5_pins[] = {
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
 };
 
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins));
-	return 0;
-}
-
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
 	&mxc_fec_device,
+	&mxc_w1_master_device,
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port3_init,
-		.exit = uart_mxc_port3_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port4_init,
-		.exit = uart_mxc_port4_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port5_init,
-		.exit = uart_mxc_port5_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
 static void __init mx27ads_board_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 
 static void __init mx27ads_map_io(void)
 {
-	mxc_map_io();
+	mx27_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
new file mode 100644
index 00000000000..3ae11cb8c04
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 00000000000..1d9238c7a6c
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa61d1b..a4628d00434 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
 #include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
 #include <mach/mxc_nand.h>
 
 #include "devices.h"
 
+static int pcm038_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD27_PF_CSPI1_SS1,
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
+};
+
 /*
  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  * 16 bit width
@@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = {
 	.resource = &pcm038_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
-				PE9_PF_UART3_RXD,
-				PE10_PF_UART3_CTS,
-				PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
@@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void)
 	__raw_writel(0x22220a00, CSCR_A(1));
 }
 
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
-			"I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm038_i2c_1_init,
-	.exit = pcm038_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 		.type = "lm75"
 	}
 };
-#endif
 
 static void __init pcm038_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+			"PCM038");
+
 	pcm038_init_sram();
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@ static void __init pcm038_init(void)
 	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
-#ifdef CONFIG_I2C_IMX
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
@@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.phys_io        = AIPI_BASE_ADDR,
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx27_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520bc1b..6a3acaf57dd 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
 #include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+	/* SDHC */
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
 	PB6_PF_SD2_D2,
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/*
+	 * it seems the data line misses a pullup, so we must enable
+	 * the internal pullup as a local workaround
+	 */
+	PD17_PF_I2C_DATA | GPIO_PUEN,
+	PD18_PF_I2C_CLK,
+	/* Camera */
+	PB10_PF_CSI_D0,
+	PB11_PF_CSI_D1,
+	PB12_PF_CSI_D2,
+	PB13_PF_CSI_D3,
+	PB14_PF_CSI_D4,
+	PB15_PF_CSI_MCLK,
+	PB16_PF_CSI_PIXCLK,
+	PB17_PF_CSI_D5,
+	PB18_PF_CSI_D6,
+	PB19_PF_CSI_D7,
+	PB20_PF_CSI_VSYNC,
+	PB21_PF_CSI_HSYNC,
 };
 
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
 static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
 {
 	int ret;
 
-	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
-		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
-	if(ret)
-		return ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
 				"imx-mmc-detect", data);
 	if (ret)
-		goto out_release_gpio;
-
-	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+		return ret;
 
 	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret)
-		goto out_release_gpio;
+	if (ret) {
+		free_irq(IRQ_GPIOC(29), data);
+		return ret;
+	}
 
-	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
 	gpio_direction_input(GPIO_PORTC + 28);
 
 	return 0;
-
-out_release_gpio:
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
-	return ret;
 }
 
 static void pcm970_sdhc2_exit(struct device *dev, void *data)
 {
 	free_irq(IRQ_GPIOC(29), data);
 	gpio_free(GPIO_PORTC + 28);
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
 }
 
 static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-static int mxc_fb_pins[] = {
-	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
-	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
-	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
-	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
-	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
-	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
-	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
-			ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
-	return 0;
-}
-
 /*
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DH06
@@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
-
-	.init = pcm038_fb_init,
-	.exit = pcm038_fb_exit,
 };
 
 /*
@@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = {
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+			"PCM970");
+
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b8428bba..17a21a291e2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
 if ARCH_MX3
 
 config ARCH_MX31
+	select ARCH_HAS_RNGA
 	bool
 
 config ARCH_MX35
 	bool
+	select ARCH_MXC_IOMUX_V3
 
 comment "MX3 platforms:"
 
@@ -37,7 +39,6 @@ config MACH_PCM037
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -45,7 +46,6 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -53,17 +53,43 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select ARCH_MX31
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select ARCH_MX35
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select ARCH_MX31
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select ARCH_MX35
+	default n
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a953b3..0322696bd11 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,9 +8,13 @@ obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
 obj-$(CONFIG_MACH_QONG)		+= qong.o
+obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
new file mode 100644
index 00000000000..541181090b3
--- /dev/null
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -0,0 +1,295 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	/* LAN9118_IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 640x480 @ 60 Hz */
+		.name		= "CRT-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 35,
+		.right_margin	= 115,
+		.upper_margin	= 43,
+		.lower_margin	= 1,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {/* 800x600 @ 56 Hz */
+		.name		= "CRT-SVGA",
+		.refresh	= 56,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 30000,
+		.left_margin	= 30,
+		.right_margin	= 108,
+		.upper_margin	= 13,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+				   irq_handler_t detect_irq, void *data)
+{
+	int ret;
+	int gpio_det, gpio_wp;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+	ret = gpio_request(gpio_det, "sdhc-card-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(gpio_det);
+
+	ret = gpio_request(gpio_wp, "sdhc-write-protect");
+	if (ret)
+		goto err_gpio_free;
+
+	gpio_direction_input(gpio_wp);
+
+	/* When supported the trigger type have to be BOTH */
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "sdhc-detect", data);
+
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(gpio_wp);
+
+err_gpio_free:
+	gpio_free(gpio_det);
+
+	return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = armadillo5x0_sdhc1_get_ro,
+	.init = armadillo5x0_sdhc1_init,
+	.exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+	{
+		.start	= CS3_BASE_ADDR,
+		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+	.resource       = armadillo5x0_smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* Register UART */
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+	/* Register FB */
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+	.init	= armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+	/* Maintainer: Alberto Panizzo  */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &armadillo5x0_timer,
+	.init_machine	= armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 53a112d4e04..577ee83d1f6 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = {
 	{ .arm = 0, .ahb = 0, .sel = 0},
 };
 
-static struct arm_ahb_div clk_automotive[] = {
-	{ .arm = 1, .ahb = 3, .sel = 0},
-	{ .arm = 1, .ahb = 2, .sel = 1},
-	{ .arm = 2, .ahb = 1, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 0},
-	{ .arm = 1, .ahb = 4, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
 static unsigned long get_rate_arm(void)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1) {
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-		if (aad->sel)
-			fref = fref * 2 / 3;
-	} else {
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
-		if (aad->sel)
-			fref = fref * 3 / 4;
-	}
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	if (aad->sel)
+		fref = fref * 2 / 3;
+
 	return fref / aad->arm;
 }
 
@@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1)
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	else
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
 	return fref / aad->ahb;
 }
@@ -404,7 +381,7 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 		.clk = &c,		\
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
@@ -430,7 +407,8 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
 	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
 	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
 	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-	mxc_set_cpu_type(MXC_CPU_MX35);
-
 #ifdef CONFIG_DEBUG_LL_CONSOLE
 	ll = (3 << 16);
 #endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9957a11533a..8b14239724c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
 DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
@@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
@@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref)
 	u32 reg;
 	int i;
 
-	mxc_set_cpu_type(MXC_CPU_MX31);
-
 	ckih_rate = fref;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* change the csi_clk parent if necessary */
+	reg = __raw_readl(MXC_CCM_CCMR);
+	if (!(reg & MXC_CCM_CCMR_CSCS))
+		if (clk_set_parent(&csi_clk, &usb_pll_clk))
+			pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
 	/* Turn off all possible clocks */
 	__raw_writel((3 << 4), MXC_CCM_CGR0);
 	__raw_writel(0, MXC_CCM_CGR1);
@@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref)
 					   MX32, but still required to be set */
 		     MXC_CCM_CGR2);
 
+	/*
+	 * Before turning off usb_pll make sure ipg_per_clk is generated
+	 * by ipg_clk and not usb_pll.
+	 */
+	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
 	usb_pll_disable(&usb_pll_clk);
 
 	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c9b21..d927eddcad4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
  * Boston, MA  02110-1301, USA.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/common.h>
 #include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
 
 #include "devices.h"
 
@@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = {
 	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
 	.resource = mxcsdhc1_resources,
 };
+
+static struct resource rnga_resources[] = {
+	{
+		.start = RNGA_BASE_ADDR,
+		.end = RNGA_BASE_ADDR + 0x28,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_rnga_device = {
+	.name = "mxc_rnga",
+	.id = -1,
+	.num_resources = 1,
+	.resource = rnga_resources,
+};
 #endif /* CONFIG_ARCH_MX31 */
 
 /* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@ struct platform_device mx3_fb = {
 	.num_resources	= ARRAY_SIZE(fb_resources),
 	.resource	= fb_resources,
 	.dev		= {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
        },
 };
 
+static struct resource camera_resources[] = {
+	{
+		.start	= IPU_CTRL_BASE_ADDR + 0x60,
+		.end	= IPU_CTRL_BASE_ADDR + 0x87,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mx3_camera = {
+	.name		= "mx3-camera",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(camera_resources),
+	.resource	= camera_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
@@ -359,6 +422,7 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b296fa..ffd494ddd4a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a664d..c66ccbcdc11 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
- * setups a single pin:
+ * allocs a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad >= (PIN_MAX + 1)) {
 		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
 	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
 		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
 			pad, label ? label : "?");
-		return -EINVAL;
+		return -EBUSY;
 	}
 	mxc_iomux_mode(pin);
 
-	/* if we have a gpio, we can allocate it */
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		if (gpio_request(gpio, label))
-			return -EINVAL;
-
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 		const char *label)
@@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 	int ret = -EINVAL;
 
 	for (i = 0; i < count; i++) {
-		if (mxc_iomux_setup_pin(*p, label))
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
 			goto setup_error;
 		p++;
 	}
@@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 void mxc_iomux_release_pin(const unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad < (PIN_MAX + 1))
 		clear_bit(pad, mxc_pin_alloc_map);
-
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		gpio_free(gpio);
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459cb4b7..1f5fdd456cb 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX31);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efefa6a..30e2767a78a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void)
 	/*
 	 * Configure INT line as GPIO input
 	 */
-	mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
 	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
  */
 static void __init mx31ads_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
new file mode 100644
index 00000000000..3b3a78f49c2
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ *  LILLY-1131 development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	= mxc_mmc1_get_ro,
+	.init	= mxc_mmc1_init,
+	.exit	= mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+	/* 640x480 TFT panel (IPS-056T) */
+	.name	   	= "CRT-VGA",
+	.refresh	= 64,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 30000,
+	.left_margin	= 200,
+	.right_margin	= 2,
+	.upper_margin	= 2,
+	.lower_margin	= 2,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+	.vmode		= FB_VMODE_NONINTERLACED,
+	.flag		= 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= &fb_modedb,
+	.num_modes	= 1,
+};
+
+#define LCD_VCC_EN_GPIO	 (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+		return;
+	}
+
+	mxc_register_device(&mx3_ipu, &ipu_data);
+	mxc_register_device(&mx3_fb, &fb_pdata);
+	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+					ARRAY_SIZE(lilly_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mx31lilly_init_fb();
+}
+
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
new file mode 100644
index 00000000000..6ab2f163cb9
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -0,0 +1,155 @@
+/*
+ *  LILLY-1131 module support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+	{
+		.start	= CS4_BASE_ADDR,
+		.end	= CS4_BASE_ADDR + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT |
+			  SMSC911X_SAVE_MAC_ADDRESS |
+			  SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc91x_resources),
+	.resource	= smsc91x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	}
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+	&mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+	switch (mx31lilly_baseboard) {
+	case MX31LILLY_NOBOARD:
+		break;
+	case MX31LILLY_DB:
+		mx31lilly_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+			mx31lilly_baseboard);
+	}
+
+	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+	.init	= mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.init_machine	= mx31lilly_board_init,
+	.timer		= &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98cd994..86fe70fa3e1 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,11 +35,64 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
 
 /*
  * This file contains the board-specific initialization routines.
  */
 
+static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* LAN9117 IRQ pin */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= CS4_BASE_ADDR,
+		.end		= CS4_BASE_ADDR + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
  */
 void __init mx31lite_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
@@ -68,6 +124,22 @@ void __init mx31lite_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+				      "mx31lite");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+	/* SMSC9117 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+		platform_device_register(&smsc911x_device);
+	}
 }
 
 static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4add79..4704405165a 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int devboard_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int mxc_uart1_pins[] = {
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= devboard_sdhc2_get_ro,
+	.init	= devboard_sdhc2_init,
+	.exit	= devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_devboard_init(void)
 {
 	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+		"devboard");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566823f..641c3d6153a 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int marxbot_pins[] = {
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	MX31_PIN_TXD2__GPIO1_28,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= marxbot_sdhc2_get_ro,
+	.init	= marxbot_sdhc2_init,
+	.exit	= marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_marxbot_init(void)
 {
 	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+		"marxbot");
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	marxbot_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b99d4..a17f2e41160 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int moboard_pins[] = {
+	/* UART0 */
+	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	/* UART4 */
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+	/* I2C0 */
+	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+	/* I2C1 */
+	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
 static struct physmap_flash_data mx31moboard_flash_data = {
 	.width  	= 2,
 };
@@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+	.bitrate = 400000,
 };
 
-static int mxc_uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+	.bitrate = 100000,
 };
-static int mxc_uart4_pins[] = {
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_CD);
+
+	ret = gpio_request(SDHC1_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc1-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC1_WP);
+err_gpio_free:
+	gpio_free(SDHC1_CD);
+
+	return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC1_CD), data);
+	gpio_free(SDHC1_WP);
+	gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.get_ro	= moboard_sdhc1_get_ro,
+	.init	= moboard_sdhc1_init,
+	.exit	= moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
 };
 
 static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mxc_board_init(void)
 {
+	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+		"moboard");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -99,7 +177,8 @@ static void __init mxc_board_init(void)
 		mx31moboard_marxbot_init();
 		break;
 	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+			mx31moboard_baseboard);
 	}
 }
 
@@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f178569..c19838d2e36 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,9 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,21 +44,192 @@
  * @ingroup System
  */
 
+static int mx31pdk_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= LAN9217_BASE_ADDR,
+		.end		= LAN9217_BASE_ADDR + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= EXPIO_INT_ENET,
+		.end		= EXPIO_INT_ENET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
 };
 
-static inline void mxc_init_imx_uart(void)
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
 {
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	uint32_t imr_val;
+	uint32_t int_valid;
+	uint32_t expio_irq;
+
+	imr_val = __raw_readw(CPLD_INT_MASK_REG);
+	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* mask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg |= 1 << expio;
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	/* mask the interrupt */
+	expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* unmask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+	int i;
+	int ret;
+
+	/* Check if there's a debug board connected */
+	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		/* No Debug board found */
+		return -ENODEV;
+	}
+
+	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+		__raw_readw(CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/* Disable the interrupts and clear the status */
+	__raw_writew(0, CPLD_INT_MASK_REG);
+	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	__raw_writew(0x1F, CPLD_INT_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+	return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+	{
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED,
+	}, {
+		.virtual = CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
+		.length = CS5_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
 }
 
 /*!
@@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void)
  */
 static void __init mxc_board_init(void)
 {
-	mxc_init_imx_uart();
+	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+				      "mx31pdk");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	if (!mx31pdk_init_expio())
+		platform_device_register(&smsc911x_device);
 }
 
 static void __init mx31pdk_timer_init(void)
@@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31pdk_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
new file mode 100644
index 00000000000..6d15374414b
--- /dev/null
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d837b2..c6f61a1f06c 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,7 +41,9 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
 
 #include "devices.h"
 
+static unsigned int pcm037_pins[] = {
+	/* I2C */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+	/* SPI1 */
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	/* UART3 */
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	/* LAN9217 irq pin */
+	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+	/* Onewire */
+	MX31_PIN_BATT_LINE__OWIRE,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_D3_REV__D3_REV,
+	MX31_PIN_CONTRAST__CONTRAST,
+	MX31_PIN_D3_SPL__D3_SPL,
+	MX31_PIN_D3_CLS__D3_CLS,
+	MX31_PIN_LCS0__GPI03_23,
+};
+
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
 };
@@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
+static int usbotg_pins[] = {
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+					ARRAY_SIZE(usbotg_pins), "usbotg");
+
+	if (ret < 0) {
+		printk(KERN_ERR "Cannot set up OTG pins\n");
+		return ret;
+	}
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device pcm037_flash = {
 	.name	= "physmap-flash",
 	.id	= 0,
@@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 };
 
 #ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
-	return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
-			"i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
-	mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm037_i2c_1_init,
-	.exit = pcm037_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 };
 #endif
 
-static int sdhc1_pins[] = {
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
 {
-	return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
-				"sdhc-1");
+	int ret;
+
+	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+				"sdhc-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+	gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+	gpio_free(SDHC1_GPIO_DET);
+
+	return ret;
 }
 
 static void pcm970_sdhc1_exit(struct device *dev, void *data)
 {
-	mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+	gpio_free(SDHC1_GPIO_DET);
+	gpio_free(SDHC1_GPIO_WP);
 }
 
-/* No card and rw detection at the moment */
 static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+	.get_ro = pcm970_sdhc1_get_ro,
+#endif
 	.init = pcm970_sdhc1_init,
 	.exit = pcm970_sdhc1_exit,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
-	&pcm037_eth,
 	&pcm037_sram_device,
 };
 
-static int uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static int uart2_pins[] = {
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz Sharp */
+		.name		= "Sharp-LQ035Q7DH06-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7DH06-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
 /*
@@ -215,21 +392,28 @@ static int uart2_pins[] = {
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+			"pcm037");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
 	/* LAN9217 IRQ pin */
-	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-				"pcm037-eth"))
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
 		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	}
+
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@ static void __init mxc_board_init(void)
 #endif
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	if (!gpio_usbotg_hs_activate())
+		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 00000000000..8d27c324abf
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-LQ035Q7",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm043_flash_data,
+	},
+	.resource = &pcm043_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563",
+	}
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&pcm043_flash,
+	&mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+	i2c_register_board_info(0, pcm043_i2c_devices,
+			ARRAY_SIZE(pcm043_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+	.init	= pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+	/* Maintainer: Pengutronix */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48fd8f..82b31c4ab11 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 79df60c20e7..43da8bb4926 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
 {
 	int irq;
 
-	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
 
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		set_irq_chip(irq, &netx_hif_chip);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89c5fa..55ecc01ea20 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-#	select GPIOEXPANDER_OMAP
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5d754..6867cd3ad0b 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
+mailbox_mach-objs		:= mailbox.o
+
 led-y := leds.o
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed1365319..e70fc7c66bb 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
 #include <mach/common.h>
 #include <mach/dsp_common.h>
 #include <mach/omapfb.h>
+#include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	},
 };
 
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+	.te_connected		= 1,
+};
+
+static void hwa742_dev_init(void)
+{
+	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
 
 /* assume no Mini-AB port */
 
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
+	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
 	omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51dc612..436eed22801 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@ int __init omap1_clk_init(void)
 	arm_idlect1_mask = ~0;
 
 	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	cpu_mask = 0;
 	if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f5311..5218943c91c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <mach/tc.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/dma.h>
 #include <mach/dmtimer.h>
 
+#include "pm.h"
+
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
  * going idle we continue to do idle even if we get
  * a clock tick interrupt . .
  */
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
 {
 	extern __u32 arm_idlect1_mask;
 	__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void)
 #define EN_APICK	6	/* ARM_IDLECT2 */
 #define DSP_EN		1	/* ARM_RSTCT1 */
 
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
 {
 	unsigned long arg0 = 0, arg1 = 0;
 
@@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state)
 	{
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
-		omap_pm_suspend();
+		omap1_pm_suspend();
 		break;
 	default:
 		return -EINVAL;
@@ -683,7 +684,7 @@ static int __init omap_pm_init(void)
 		return -ENODEV;
 	}
 
-	pm_idle = omap_pm_idle;
+	pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap730())
 		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
index ce6ee792753..9ed5e2c1de4 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
 /*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
  *
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
  *
  * Author: MontaVista Software, Inc.
  *	   support@mvista.com
@@ -31,8 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
 
 /*
  * ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
+	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
 #endif
 
@@ -115,29 +114,27 @@
 
 #include <linux/clk.h>
 
+extern struct kset power_subsys;
+
 extern void prevent_idle_sleep(void);
 extern void allow_idle_sleep(void);
 
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
-					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
 
 extern unsigned int omap730_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
 extern unsigned int omap730_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
 #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
 
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
 /*
  * List of global OMAP registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@ enum mpui1610_save_state {
 #endif
 };
 
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
 #endif /* ASSEMBLER */
 #endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b148f..f754cee4f3c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac932092..22e8568339b 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
 
 		.text
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c..a755eb5e236 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
+	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3EVM
+	bool "OMAP 3530 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+	bool "OMAP3 Zoom2 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+	bool "OMAP 4430 SDP board"
+	depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c49d9bfa3ab..735bae5b0de 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,21 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
-		clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common				= irq.o sdrc.o
+prcm-common				= prcm.o powerdomain.o
+clock-common				= clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
+# SMP support ONLY available for OMAP4
+obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
@@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
+iommu-y					+= iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
@@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y					+= usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
+obj-y					+= $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
+obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 22143651037..9c3fdcdf76c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SDP2430_CS0_BASE	0x04000000
-#define	SDP2430_FLASH_CS	0
-#define	SDP2430_SMC91X_CS	5
-
-#define SDP2430_ETHR_GPIO_IRQ		149
+#define SECONDARY_LCD_GPIO		147
 
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct resource sdp2430_smc91x_resources[] = {
-	[0] = {
-		.start	= SDP2430_CS0_BASE,
-		.end	= SDP2430_CS0_BASE + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp2430_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+	.name		= "sdp2430_lcd",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),
-	.resource	= sdp2430_smc91x_resources,
 };
 
 static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_smc91x_device,
 	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
-static inline void __init sdp2430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int rate;
-	struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
 
-	eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
 
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	/* Make sure CS1 timings are correct, for 2430 always muxed */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else { /* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
+};
 
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
 
-	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			SDP2430_ETHR_GPIO_IRQ);
-		gpmc_cs_free(eth_cs);
-		goto out;
-	}
-	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
 
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init omap_2430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp2430_init_smc91x();
 }
 
 static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
 
 static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
 
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
+	int ret;
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+	if (ret == 0)
+		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed927497212..496a90e4ea7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
 
 #include <mach/control.h>
 #include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
 
+#include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
-#define SDP3430_SMC91X_CS		3
-
 #define SDP3430_TS_GPIO_IRQ_SDPV1	3
 #define SDP3430_TS_GPIO_IRQ_SDPV2	2
 
@@ -56,24 +54,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static struct resource sdp3430_smc91x_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp3430_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
-	.resource	= sdp3430_smc91x_resources,
-};
-
 static int sdp3430_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 };
 
 static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_smc91x_device,
 	&sdp3430_lcd_device,
 };
 
-static inline void __init sdp3430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	int eth_gpio = 0;
-
-	eth_cs = SDP3430_SMC91X_CS;
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
-	else
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
-	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
-	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			eth_gpio);
-		return;
-	}
-	gpio_direction_input(eth_gpio);
-}
-
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp3430_init_smc91x();
 }
 
 static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init();
+	board_smc91x_init();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 00000000000..57e477bd89c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0fcda1..d8bc0a7dcb8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap		= ldp_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+	[0] = {
+		.code			= KEY_ENTER,
+		.gpio			= 101,
+		.desc			= "enter sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[1] = {
+		.code			= KEY_F1,
+		.gpio			= 102,
+		.desc			= "func 1",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[2] = {
+		.code			= KEY_F2,
+		.gpio			= 103,
+		.desc			= "func 2",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[3] = {
+		.code			= KEY_F3,
+		.gpio			= 104,
+		.desc			= "func 3",
+		.active_low		= 1,
+		.debounce_interval 	= 30,
+	},
+	[4] = {
+		.code			= KEY_F4,
+		.gpio			= 105,
+		.desc			= "func 4",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[5] = {
+		.code			= KEY_LEFT,
+		.gpio			= 106,
+		.desc			= "left sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[6] = {
+		.code			= KEY_RIGHT,
+		.gpio			= 107,
+		.desc			= "right sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[7] = {
+		.code			= KEY_UP,
+		.gpio			= 108,
+		.desc			= "up sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[8] = {
+		.code			= KEY_DOWN,
+		.gpio			= 109,
+		.desc			= "down sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+	.buttons		= ldp_gpio_keys_buttons,
+	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
+	.rep			= 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ldp_gpio_keys,
+	},
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
 };
 
 static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct platform_device ldp_lcd_device = {
+	.name		= "ldp_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
+	{ OMAP_TAG_LCD,		&ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
+static struct twl4030_madc_platform_data ldp_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ldp_vmmc1_supply,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.madc		= &ldp_madc_data,
+	.usb		= &ldp_usb_data,
+	.vmmc1		= &ldp_vmmc1,
 	.gpio		= &ldp_gpio_data,
+	.keypad		= &ldp_kp_twl4030_data,
 };
 
 static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smsc911x_device,
+	&ldp_lcd_device,
+	&ldp_gpio_keys_device,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	ts_gpio = 54;
+	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(ldp_spi_board_info,
+				ARRAY_SIZE(ldp_spi_board_info));
+	ads7846_dev_init();
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
+
+	twl4030_mmc_init(mmc);
+	/* link regulators to MMC adapters */
+	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d1f9a..991ac9c3803 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 
 #include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
 static struct gpio_led gpio_leds[];
 
 static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	beagle_vmmc1_supply.dev = mmc[0].dev;
+	beagle_vsim_supply.dev = mmc[0].dev;
+
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
 	.setup		= beagle_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply beagle_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdvi_supply,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.gpio		= &beagle_gpio_data,
+	.vmmc1		= &beagle_vmmc1,
+	.vsim		= &beagle_vsim,
+	.vdac		= &beagle_vdac,
+	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 00000000000..d3cc145814d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO	175
+
+#define OMAP3EVM_ETHR_START	0x2c000000
+#define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_GPIO_IRQ	176
+#define OMAP3EVM_SMC911X_CS	5
+
+static struct resource omap3evm_smc911x_resources[] = {
+	[0] =	{
+		.start	= OMAP3EVM_ETHR_START,
+		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
+	.resource	= &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3EVM_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+			OMAP3EVM_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 63,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "omap3evm::ledb",
+		/* normally not visible (board underside) */
+		.default_trigger	= "default-on",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(L8_34XX_GPIO63);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	platform_device_register(&leds_gpio);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+	.rows		= 4,
+	.cols		= 4,
+	.keymap		= omap3evm_keymap,
+	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3evm_kp_data,
+	.madc		= &omap3evm_madc_data,
+	.usb		= &omap3evm_usb_data,
+	.gpio		= &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3evm_twldata,
+	},
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+			ARRAY_SIZE(omap3evm_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name		= "omap3evm_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+	[0] = {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+	omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+	&omap3_evm_lcd_device,
+	&omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+	omap3_evm_i2c_init();
+
+	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+	spi_register_board_info(omap3evm_spi_board_info,
+				ARRAY_SIZE(omap3evm_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init();
+	ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_evm_map_io,
+	.init_irq	= omap3_evm_init_irq,
+	.init_machine	= omap3_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c6cf1..e32aa23ce96 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME		127
+
+static struct gpio_led pandora_gpio_leds[] = {
+	{
+		.name			= "pandora::sd1",
+		.default_trigger	= "mmc0",
+		.gpio			= 128,
+	}, {
+		.name			= "pandora::sd2",
+		.default_trigger	= "mmc1",
+		.gpio			= 129,
+	}, {
+		.name			= "pandora::bluetooth",
+		.gpio			= 158,
+	}, {
+		.name			= "pandora::wifi",
+		.gpio			= 159,
+	},
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+	.leds		= pandora_gpio_leds,
+	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_led_data,
+	},
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
+	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
+	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
+	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
+	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
+	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
+	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
+	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
+	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
+	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
+	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
+	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
+	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
+	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
+	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+	.buttons	= pandora_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_key_info,
+	},
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+	/* set debounce time for GPIO banks 4 and 6 */
+	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+	/* col, row, code */
+	KEY(0, 0, KEY_9),
+	KEY(0, 1, KEY_0),
+	KEY(0, 2, KEY_BACKSPACE),
+	KEY(0, 3, KEY_O),
+	KEY(0, 4, KEY_P),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_L),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 0, KEY_8),
+	KEY(1, 1, KEY_7),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_5),
+	KEY(1, 4, KEY_4),
+	KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_2),
+	KEY(1, 7, KEY_1),
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_U),
+	KEY(2, 2, KEY_Y),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_R),
+	KEY(2, 5, KEY_E),
+	KEY(2, 6, KEY_W),
+	KEY(2, 7, KEY_Q),
+	KEY(3, 0, KEY_J),
+	KEY(3, 1, KEY_H),
+	KEY(3, 2, KEY_G),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_D),
+	KEY(3, 5, KEY_S),
+	KEY(3, 6, KEY_A),
+	KEY(3, 7, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_N),
+	KEY(4, 1, KEY_B),
+	KEY(4, 2, KEY_V),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_X),
+	KEY(4, 5, KEY_Z),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 7, KEY_COMMA),
+	KEY(5, 0, KEY_M),
+	KEY(5, 1, KEY_SPACE),
+	KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+	.rows		= 8,
+	.cols		= 6,
+	.keymap		= pandora_keypad_map,
+	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
+	.rep		= 1,
+};
+
 static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
 	.enabled_uarts	= (1 << 2), /* UART3 */
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	twl4030_mmc_init(omap3pandora_mmc);
 
+	/* link regulators to MMC adapters */
+	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
 	return 0;
 }
 
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc2_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.vmmc1		= &pandora_vmmc1,
+	.vmmc2		= &pandora_vmmc2,
+	.keypad		= &pandora_kp_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
+	&pandora_leds_gpio,
+	&pandora_keys_gpio,
 };
 
 static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	pandora_keys_gpio_init();
 	usb_musb_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23bea863..dff5528fbfb 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	twl4030_mmc_init(mmc);
+
+	overo_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+}
+
 static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
+	.usb		= &overo_usb_data,
+	.vmmc1		= &overo_vmmc1,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65950", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-	},
-	{}	/* Terminator */
-};
-
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	overo_flash_init();
 	usb_musb_init();
 	overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a7381729645..da93b86234e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
-
-#define SMC91X_CS			1
-#define SMC91X_GPIO_IRQ			54
-#define SMC91X_GPIO_RESET		164
-#define SMC91X_GPIO_PWRDWN		86
-
-static struct resource rx51_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device rx51_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
-	.resource	= rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3	0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
 
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct platform_device *rx51_peripherals_devices[] = {
-	&rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
-	struct gpmc_timings t;
-	const int t2_r = 45;		/* t2 in Figure 12.10 */
-	const int t2_w = 30;		/* t2 in Figure 12.11 */
-	const int t3 = 15;		/* t3 in Figure 12.10 */
-	const int t5_r = 0;		/* t5 in Figure 12.10 */
-	const int t6_r = 45;		/* t6 in Figure 12.10 */
-	const int t6_w = 0;		/* t6 in Figure 12.11 */
-	const int t7_w = 15;		/* t7 in Figure 12.11 */
-	const int t15 = 12;		/* t15 in Figure 12.2 */
-	const int t20 = 185;		/* t20 in Figure 12.2 */
-
-	memset(&t, 0, sizeof(t));
-
-	t.cs_on = t15;
-	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.adv_on = t3;			/* Figure 12.10 */
-	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
-	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
-	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
-	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
-	t.rd_cycle = t20;		/* Figure 12.2 */
-	t.wr_cycle = t20;		/* Figure 12.4 */
-	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
-
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
-	return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
-	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
-	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
-	smc91x_init_gpmc(SMC91X_CS);
-
-	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
-		goto free1;
-
-	gpio_direction_input(SMC91X_GPIO_IRQ);
-	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
-	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
-	if (ret)
-		goto free2;
-	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
-	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
-	if (ret)
-		goto free3;
-	gpio_direction_output(SMC91X_GPIO_RESET, 0);
-	gpio_set_value(SMC91X_GPIO_RESET, 1);
-	msleep(100);
-	gpio_set_value(SMC91X_GPIO_RESET, 0);
-
-	return;
-
-free3:
-	gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
-	gpio_free(SMC91X_GPIO_IRQ);
-free1:
-	gpmc_cs_free(SMC91X_CS);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
 };
 
 /* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
 	.constraints = {
 		.name			= "VCAM_DIG_18",
 		.min_uV			= 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
 	},
 };
 
+static struct regulator_init_data rx51_vaux3_mmc = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
 static struct regulator_init_data rx51_vaux4 = {
 	.constraints = {
 		.name			= "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-	.vaux3			= &rx51_vaux3,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
-	.vmmc2			= &rx51_vmmc2,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
 };
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 
 static int __init rx51_i2c_init(void)
 {
+	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+	else {
+		rx51_twldata.vaux3 = &rx51_vaux3_cam;
+		rx51_twldata.vmmc2 = &rx51_vmmc2;
+	}
 	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "log",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x40000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 65,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 54,
+	.gpio_pwrdwn	= 86,
+	.gpio_reset	= 164,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
 
 void __init rx51_peripherals_init(void)
 {
-	platform_add_devices(rx51_peripherals_devices,
-				ARRAY_SIZE(rx51_peripherals_devices));
 	rx51_i2c_init();
-	rx51_init_smc91x();
+	board_onenand_init();
+	board_smc91x_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 00000000000..bac5c4321ff
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS	7
+#define ZOOM2_SMSC911X_GPIO	158
+#define ZOOM2_QUADUART_CS	3
+#define ZOOM2_QUADUART_GPIO	102
+#define QUART_CLK		1843200
+#define DEBUG_BASE		0x08000000
+#define ZOOM2_ETHR_START	DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+	[0] = {
+		.start	= ZOOM2_ETHR_START,
+		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
+	.resource	= zoom2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &zoom2_smsc911x_config,
+	},
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = ZOOM2_SMSC911X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+		return;
+	}
+
+	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+				eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= 0x10000000,
+		.irq		= OMAP_GPIO_IRQ(102),
+		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= QUART_CLK,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+	int quart_cs;
+	unsigned long cs_mem_base;
+	int quart_gpio = 0;
+
+	quart_cs = ZOOM2_QUADUART_CS;
+
+	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem"
+				"for Quad UART(TL16CP754C)\n");
+		return;
+	}
+
+	quart_gpio = ZOOM2_QUADUART_GPIO;
+
+	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+								quart_gpio);
+		return;
+	}
+	gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+	int debug_board_detect = 0;
+
+	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+		"board detect\n", debug_board_detect);
+		return 0;
+	}
+	gpio_direction_input(debug_board_detect);
+
+	if (!gpio_get_value(debug_board_detect)) {
+		gpio_free(debug_board_detect);
+		return 0;
+	}
+	return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+	&zoom2_smsc911x_device,
+	&zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+	if (!omap_zoom2_debugboard_detect())
+		return 0;
+
+	zoom2_init_smsc911x();
+	zoom2_init_quaduart();
+	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 00000000000..bcc0f7632de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+	{ OMAP_TAG_UART,	&zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom2_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+			ARRAY_SIZE(zoom2_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap_serial_init();
+	omap_zoom2_debugboard_init();
+	twl4030_mmc_init(mmc);
+	usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom2_map_io,
+	.init_irq	= omap_zoom2_init_irq,
+	.init_machine	= omap_zoom2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a153441..ba528f85749 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
 		return;
 
 	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 }
 
 /*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
 
-	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
-	       clk->name, target_rate);
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
 
 	*new_div = 1;
 
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			pr_err("clock: clksel_rate table not sorted "
 			       "for clock %s", clk->name);
 
 		last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	}
 
 	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor for target "
+		pr_err("clock: Could not find divisor for target "
 		       "rate %ld for clock %s parent %s\n", target_rate,
 		       clk->name, clk->parent->name);
 		return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 	*new_div = clkr->div;
 
-	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
-	       (clk->parent->rate / clkr->div));
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
 
 	return (clk->parent->rate / clkr->div);
 }
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index efc59c49341..44de0271fc2 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
@@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
 	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
 static struct clk *vclk;
 static struct clk *sclk;
 
+static void __iomem *prcm_clksrc_ctrl;
+
 /*-------------------------------------------------------------------------
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div = __raw_readl(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
 	struct omap_clk *c;
 	u32 clkrate;
 
-	if (cpu_is_omap242x())
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_243X;
+	}
 
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb40fc..458f00cdcbe 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
 static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 0a14dca31e3..9e43fe5209d 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
 	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
 	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
@@ -157,7 +160,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -197,11 +200,11 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
-	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
+	u32 unlock_dll = 0;
 	unsigned long validrate, sdrcrate;
 	struct omap_sdrc_params *sp;
 
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!sp)
 		return -EINVAL;
 
-	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		validrate);
-	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
-		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
 	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
 	WARN_ON(new_div != 1 && new_div != 2);
 
 	/* REVISIT: Add SDRC_MR changing to this code also */
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div);
+				  sp->actim_ctrlb, new_div, unlock_dll);
 
 	return 0;
 }
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
 		if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 6763b8f7302..e433aec4efd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
 static unsigned long omap3_dpll_recalc(struct clk *clk);
 static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static const struct clksel omap343x_gpt_clksel[] = {
 	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
 	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
 /* SECURITY_L4_ICK2 based clocks */
 
 static struct clk security_l4_ick2 = {
@@ -2182,7 +2213,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2458,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2468,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2478,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2488,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2498,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da1918..fe319ae4ca0 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a36aae..6923deb98a2 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP3430_EN_ICR					(1 << 29)
@@ -161,6 +163,8 @@
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
 #define OMAP3430_EN_OMAPCTRL				(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT				3
 #define OMAP3430_EN_SDRC				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
@@ -176,6 +180,10 @@
 #define OMAP3430_EN_DES1				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT				3
+#define OMAP3430_EN_MAD2D				(1 << 3)
+
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
 #define OMAP3430ES2_EN_TS_MASK				(1 << 1)
@@ -231,6 +239,8 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT			31
 #define OMAP3430ES2_AUTO_MMC3				(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
 #define OMAP3430ES2_AUTO_ICR				(1 << 29)
@@ -287,6 +297,8 @@
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
 #define OMAP3430ES1_AUTO_D2D				(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT			3
 #define OMAP3430_AUTO_SSI				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
@@ -308,6 +320,8 @@
 #define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT			3
+#define OMAP3430_AUTO_MAD2D				(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78c91e..1d3c93bf86d 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global CM registers
@@ -38,6 +33,7 @@
 #define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
 #define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
 
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 496983ade97..894cc355818 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	platform_device_register(&omap2_mcspi3);
+	if (cpu_is_omap2430() || cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi3);
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	platform_device_register(&omap2_mcspi4);
+	if (cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi4);
 #endif
 }
 
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 00000000000..2fd22f9c5f0
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts:	Juha Yrjola
+ *		Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+
+	const int t_cer = 15;
+	const int t_avdp = 12;
+	const int t_aavdh = 7;
+	const int t_ce = 76;
+	const int t_aa = 76;
+	const int t_oe = 20;
+	const int t_cez = 20; /* max of t_cez, t_oez */
+	const int t_ds = 30;
+	const int t_wpl = 40;
+	const int t_wph = 30;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = 0;
+	t.cs_on = 0;
+	t.adv_on = 0;
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Write */
+	t.adv_wr_off = t.adv_rd_off;
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+		t.wr_data_mux_bus = t.we_on;
+		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+	}
+	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Configure GPMC for asynchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+				int sync_read, int sync_write, int hf)
+{
+	u32 reg;
+
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+	if (sync_write)
+		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	if (hf)
+		reg |= ONENAND_SYS_CFG1_HF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_HF;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
+{
+	struct gpmc_timings t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_ds   = 30;
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int err, ticks_cez;
+	int cs = cfg->cs;
+	u32 reg;
+
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		err = omap2_onenand_set_async_mode(cs, onenand_base);
+		if (err)
+			return err;
+		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+		switch ((reg >> 4) & 0xf) {
+		case 0:
+			freq = 40;
+			break;
+		case 1:
+			freq = 54;
+			break;
+		case 2:
+			freq = 66;
+			break;
+		case 3:
+			freq = 83;
+			break;
+		case 4:
+			freq = 104;
+			break;
+		default:
+			freq = 54;
+			break;
+		}
+		first_time = 1;
+	}
+
+	switch (freq) {
+	case 83:
+		min_gpmc_clk_period = 12; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		sync_write = 0;
+		break;
+	}
+
+	tick_ns = gpmc_ticks_to_ns(1);
+	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	gpmc_clk_ns = gpmc_ticks_to_ns(div);
+	if (gpmc_clk_ns < 15) /* >66Mhz */
+		hf = 1;
+	if (hf)
+		latency = 6;
+	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+		latency = 3;
+	else
+		latency = 4;
+
+	if (first_time)
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
+
+	if (div == 1) {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg |= (1 << 7);
+		reg |= (1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	} else {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg &= ~(1 << 7);
+		reg &= ~(1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	}
+
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = min_gpmc_clk_period;
+	t.cs_on = 0;
+	t.adv_on = 0;
+	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+	t.page_burst_access = gpmc_clk_ns;
+
+	/* Read */
+	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+		     ticks_cez);
+
+	/* Write */
+	if (sync_write) {
+		t.adv_wr_off = t.adv_rd_off;
+		t.we_on  = 0;
+		t.we_off = t.cs_rd_off;
+		t.cs_wr_off = t.cs_rd_off;
+		t.wr_cycle  = t.rd_cycle;
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+					gpmc_ns_to_ticks(min_gpmc_clk_period +
+					t_rdyo));
+			t.wr_access = t.access;
+		}
+	} else {
+		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+							t_avdp, t_cer));
+		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = t.we_on;
+			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+		}
+	}
+
+	/* Configure GPMC for synchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_WRAPBURST_SUPP |
+			  GPMC_CONFIG1_READMULTIPLE_SUPP |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+			  GPMC_CONFIG1_PAGE_LEN(2) |
+			  (cpu_is_omap34xx() ? 0 :
+				(GPMC_CONFIG1_WAIT_READ_MON |
+				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_DEVICETYPE_NOR |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+	return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+	struct device *dev = &gpmc_onenand_device.dev;
+
+	/* Set sync timings in GPMC */
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+			freq) < 0) {
+		dev_err(dev, "Unable to set synchronous mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+	gpmc_onenand_data = _onenand_data;
+	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
+	if (platform_device_register(&gpmc_onenand_device) < 0) {
+		printk(KERN_ERR "Unable to register OneNAND device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 00000000000..df99d31d8b6
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact:	Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smc91x_info,
+	},
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
+	const int t4_r = 20;	/* Figure 12.2 read */
+	const int t4_w = 5;	/* Figure 12.4 write */
+	const int t5 = 25;	/* Figure 12.2 read */
+	const int t6 = 15;	/* Figure 12.2 read */
+	const int t7 = 5;	/* Figure 12.4 write */
+	const int t8 = 5;	/* Figure 12.4 write */
+	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
+	u32 l;
+
+	memset(&t, 0, sizeof(t));
+
+	/* Read timings */
+	t.cs_on = 0;
+	t.adv_on = t.cs_on;
+	t.oe_on = t.adv_on + t3;
+	t.access = t.oe_on + t5;
+	t.oe_off = t.access;
+	t.adv_rd_off = t.oe_off + max(t4_r, t6);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle = t20 - t.oe_on;
+
+	/* Write timings */
+	t.we_on = t.adv_on + t3;
+
+	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+		t.wr_data_mux_bus = t.we_on;
+		t.we_off = t.wr_data_mux_bus + t7;
+	} else
+		t.we_off = t.we_on + t7;
+	if (cpu_is_omap34xx())
+		t.wr_access = t.we_off;
+	t.adv_wr_off = t.we_off + max(t4_w, t8);
+	t.cs_wr_off = t.we_off + t4_w;
+	t.wr_cycle = t20 - t.we_on;
+
+	l = GPMC_CONFIG1_DEVICESIZE_16;
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		l |= GPMC_CONFIG1_MUXADDDATA;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		l |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (gpmc_cfg->wait_pin)
+		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+	/*
+	 * FIXME: Calculate the address and data bus muxed timings.
+	 * Note that at least adv_rd_off needs to be changed according
+	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+	 * FPGA in between smc91x and omap as the timings are different
+	 * from above?
+	 */
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		return 0;
+
+	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+		gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpmc_cfg->retime) {
+		ret = gpmc_cfg->retime();
+		if (ret != 0)
+			goto free1;
+	}
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+	if (gpmc_cfg->gpio_pwrdwn) {
+		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+		if (ret)
+			goto free2;
+		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+	}
+
+	if (gpmc_cfg->gpio_reset) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+		if (ret)
+			goto free3;
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+	}
+
+	if (platform_device_register(&gpmc_smc91x_device) < 0) {
+		printk(KERN_ERR "Unable to register smc91x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free3;
+	}
+
+	return;
+
+free3:
+	if (gpmc_cfg->gpio_pwrdwn)
+		gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5..f91934b2b09 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
  *
  * Author: Juha Yrjola
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap44xx()) {
+		ck = "gpmc_fck";
+		l = OMAP44XX_GPMC_BASE;
 	}
 
 	gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8..458990e20c6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
 		omap24xx_check_revision();
 	else if (cpu_is_omap34xx())
 		omap34xx_check_revision();
-	else
+	else if (cpu_is_omap44xx()) {
+		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+		return;
+	} else
 		pr_err("OMAP revision unknown, please fix!\n");
 
 	/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a232..32afd944821 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
  *
  * Author:
  *	Juha Yrjola <juha.yrjola@nokia.com>
  *	Syed Khasim <x0khasim@ti.com>
  *
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -30,6 +32,7 @@
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 
+#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
 #include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
-
+#endif
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 	},
 };
 #endif
+#ifdef	CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
+		.length		= L3_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
+		.length		= L4_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
+		.length		= L4_WK_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+		.length		= OMAP44XX_GPMC_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
+		.length		= L4_PER_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_EMU_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
+		.length		= L4_EMU_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
 
 void __init omap2_map_common_io(void)
 {
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
 	 * revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 00000000000..015f22a53ea
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION	0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT	3
+#define MMU_SYS_IDLE_FORCE	(0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE	(1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET	(1 << 1)
+#define MMU_SYS_AUTOIDLE	1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE	1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT	(1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
+#define MMU_IRQ_EMUMISS		(1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
+#define MMU_IRQ_TLBMISS		(1 << 0)
+#define MMU_IRQ_MASK	\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+	 MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT		1
+#define MMU_CNTL_MASK		(7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB	(1 << 3)
+#define MMU_CNTL_TWL_EN		(1 << 2)
+#define MMU_CNTL_MMU_EN		(1 << 1)
+
+#define get_cam_va_mask(pgsz)				\
+	(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_1M)  ? 0xfff00000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+	u32 l, pa;
+	unsigned long timeout;
+
+	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
+		return -EINVAL;
+
+	pa = virt_to_phys(obj->iopgd);
+	if (!IS_ALIGNED(pa, SZ_16K))
+		return -EINVAL;
+
+	iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = iommu_read_reg(obj, MMU_SYSSTATUS);
+		if (l & MMU_SYS_RESETDONE)
+			break;
+	} while (time_after(jiffies, timeout));
+
+	if (!(l & MMU_SYS_RESETDONE)) {
+		dev_err(obj->dev, "can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
+	l = iommu_read_reg(obj, MMU_REVISION);
+	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+		 (l >> 4) & 0xf, l & 0xf);
+
+	l = iommu_read_reg(obj, MMU_SYSCONFIG);
+	l &= ~MMU_SYS_IDLE_MASK;
+	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+	iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+	iommu_write_reg(obj, pa, MMU_TTB);
+
+	l = iommu_read_reg(obj, MMU_CNTL);
+	l &= ~MMU_CNTL_MASK;
+	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	iommu_write_reg(obj, l, MMU_CNTL);
+
+	return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	l &= ~MMU_CNTL_MASK;
+	iommu_write_reg(obj, l, MMU_CNTL);
+	iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+	int i;
+	u32 stat, da;
+	const char *err_msg[] =	{
+		"tlb miss",
+		"translation fault",
+		"emulation miss",
+		"table walk fault",
+		"multi hit fault",
+	};
+
+	stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+	stat &= MMU_IRQ_MASK;
+	if (!stat)
+		return 0;
+
+	da = iommu_read_reg(obj, MMU_FAULT_AD);
+	*ra = da;
+
+	dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+	for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+		if (stat & (1 << i))
+			printk("%s ", err_msg[i]);
+	}
+	printk("\n");
+
+	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+	return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+	cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+	iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+	u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+	u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+	return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+	struct cr_regs *cr;
+
+	if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+		dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+			e->da);
+		return ERR_PTR(-EINVAL);
+	}
+
+	cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return ERR_PTR(-ENOMEM);
+
+	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+	return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+	return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+	u32 attr;
+
+	attr = e->mixed << 5;
+	attr |= e->endian;
+	attr |= e->elsz >> 3;
+	attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+	return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+	char *p = buf;
+
+	/* FIXME: Need more detail analysis of cam/ram */
+	p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+	return p - buf;
+}
+
+#define pr_reg(name)							\
+	p += sprintf(p, "%20s: %08x\n",					\
+		     __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	char *p = buf;
+
+	pr_reg(REVISION);
+	pr_reg(SYSCONFIG);
+	pr_reg(SYSSTATUS);
+	pr_reg(IRQSTATUS);
+	pr_reg(IRQENABLE);
+	pr_reg(WALKING_ST);
+	pr_reg(CNTL);
+	pr_reg(FAULT_AD);
+	pr_reg(TTB);
+	pr_reg(LOCK);
+	pr_reg(LD_TLB);
+	pr_reg(CAM);
+	pr_reg(RAM);
+	pr_reg(GFLUSH);
+	pr_reg(FLUSH_ENTRY);
+	pr_reg(READ_CAM);
+	pr_reg(READ_RAM);
+	pr_reg(EMU_FAULT_AD);
+
+	return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		p[i] = iommu_read_reg(obj, i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		iommu_write_reg(obj, p[i], i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	e->da		= cr->cam & MMU_CAM_VATAG_MASK;
+	e->pa		= cr->ram & MMU_RAM_PADDR_MASK;
+	e->valid	= cr->cam & MMU_CAM_V;
+	e->pgsz		= cr->cam & MMU_CAM_PGSZ_MASK;
+	e->endian	= cr->ram & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= cr->ram & MMU_RAM_ELSZ_MASK;
+	e->mixed	= cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+	.version	= IOMMU_ARCH_VERSION,
+
+	.enable		= omap2_iommu_enable,
+	.disable	= omap2_iommu_disable,
+	.fault_isr	= omap2_iommu_fault_isr,
+
+	.tlb_read_cr	= omap2_tlb_read_cr,
+	.tlb_load_cr	= omap2_tlb_load_cr,
+
+	.cr_to_e	= omap2_cr_to_e,
+	.cr_to_virt	= omap2_cr_to_virt,
+	.alloc_cr	= omap2_alloc_cr,
+	.cr_valid	= omap2_cr_valid,
+	.dump_cr	= omap2_dump_cr,
+
+	.get_pte_attr	= omap2_get_pte_attr,
+
+	.save_ctx	= omap2_iommu_save_ctx,
+	.restore_ctx	= omap2_iommu_restore_ctx,
+	.dump_ctx	= omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+	return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+	uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c45587..b82863887f1 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
-
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
-	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
+int omap_irq_pending(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+		int irq;
+
+		for (irq = 0; irq < bank->nr_irqs; irq += 32)
+			if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+					       ((irq >> 5) << 5)))
+				return 1;
+	}
+	return 0;
+}
+
 void __init omap_init_irq(void)
 {
 	unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e7220..9756a878fd9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -26,31 +26,9 @@
 
 #include "mmc-twl4030.h"
 
-#if defined(CONFIG_TWL4030_CORE) && \
-	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
-#define LDO_CLR			0x00
-#define VSEL_S2_CLR		0x40
-
-#define VMMC1_DEV_GRP		0x27
-#define VMMC1_CLR		0x00
-#define VMMC1_315V		0x03
-#define VMMC1_300V		0x02
-#define VMMC1_285V		0x01
-#define VMMC1_185V		0x00
-#define VMMC1_DEDICATED		0x2A
-
-#define VMMC2_DEV_GRP		0x2B
-#define VMMC2_CLR		0x40
-#define VMMC2_315V		0x0c
-#define VMMC2_300V		0x0b
-#define VMMC2_285V		0x0a
-#define VMMC2_280V		0x09
-#define VMMC2_260V		0x08
-#define VMMC2_185V		0x06
-#define VMMC2_DEDICATED		0x2E
-
-#define VMMC_DEV_GRP_P1		0x20
+#if defined(CONFIG_REGULATOR) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
 
 static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
-	u8		twl_vmmc_dev_grp;
-	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
-	{
-		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC1_DEDICATED,
-	},
-	{
-		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC2_DEDICATED,
-	},
-};
+	/* Vcc == configured supply
+	 * Vcc_alt == optional
+	 *   -	MMC1, supply for DAT4..DAT7
+	 *   -	MMC2/MMC2, external level shifter voltage supply, for
+	 *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+	 */
+	struct regulator		*vcc;
+	struct regulator		*vcc_aux;
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
 
 static int twl_mmc_card_detect(int irq)
 {
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
 	int ret = 0;
 	int i;
 
-	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
-	if (ret)
-		goto done;
-	ret = gpio_direction_input(mmc->slots[0].switch_pin);
-	if (ret)
-		goto err;
+	/* MMC/SD/SDIO doesn't require a card detect switch */
+	if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+		ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+		if (ret)
+			goto done;
+		ret = gpio_direction_input(mmc->slots[0].switch_pin);
+		if (ret)
+			goto err;
+	}
 
+	/* require at least main regulator */
 	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
 		if (hsmmc[i].name == mmc->slots[0].name) {
+			struct regulator *reg;
+
 			hsmmc[i].mmc = mmc;
+
+			reg = regulator_get(dev, "vmmc");
+			if (IS_ERR(reg)) {
+				dev_dbg(dev, "vmmc regulator missing\n");
+				/* HACK: until fixed.c regulator is usable,
+				 * we don't require a main regulator
+				 * for MMC2 or MMC3
+				 */
+				if (i != 0)
+					break;
+				ret = PTR_ERR(reg);
+				goto err;
+			}
+			hsmmc[i].vcc = reg;
+			mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+			/* allow an aux regulator */
+			reg = regulator_get(dev, "vmmc_aux");
+			hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+			/* UGLY HACK:  workaround regulator framework bugs.
+			 * When the bootloader leaves a supply active, it's
+			 * initialized with zero usecount ... and we can't
+			 * disable it without first enabling it.  Until the
+			 * framework is fixed, we need a workaround like this
+			 * (which is safe for MMC, but not in general).
+			 */
+			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+				regulator_enable(hsmmc[i].vcc);
+				regulator_disable(hsmmc[i].vcc);
+			}
+			if (hsmmc[i].vcc_aux) {
+				if (regulator_is_enabled(reg) > 0) {
+					regulator_enable(reg);
+					regulator_disable(reg);
+				}
+			}
+
 			break;
 		}
 	}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
-	int ret;
-	u8 vmmc = 0, dev_grp_val;
-
-	if (!vdd)
-		goto doit;
-
-	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
-		/* VMMC1:  max 220 mA.  And for 8-bit mode,
-		 * VSIM:  max 50 mA
-		 */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC1_185V;
-			/* and VSIM_180V */
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC1_285V;
-			/* and VSIM_280V */
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC1_300V;
-			/* and VSIM_300V */
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC1_315V;
-			/* error if VSIM needed */
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
-		/* VMMC2:  max 100 mA */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC2_185V;
-			break;
-		case MMC_VDD_25_26:
-		case MMC_VDD_26_27:
-			vmmc = VMMC2_260V;
-			break;
-		case MMC_VDD_27_28:
-			vmmc = VMMC2_280V;
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC2_285V;
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC2_300V;
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC2_315V;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-doit:
-	if (vdd)
-		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
-	else
-		dev_grp_val = LDO_CLR;		/* Power down */
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret || !vdd)
-		return ret;
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					vmmc, c->twl_mmc_dedicated);
-
-	return ret;
-}
-
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
 	 *
 	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
 	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
 	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, 0);
+		ret = mmc_regulator_set_ocr(c->vcc, 0);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
-	int ret;
+	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/* If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
 	/*
-	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
 	 * support cards using voltages other than VDDS (1.8V nominal).  When a
 	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 *
+	 * In some cases this regulator won't support enable/disable;
+	 * e.g. it's a fixed rail for a WLAN chip.
+	 *
+	 * In other cases vcc_aux switches interface power.  Example, for
+	 * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
+	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
+		/* only MMC2 supports a CLKIN */
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
 
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 			omap_ctrl_writel(reg, control_devconf1_offset);
 		}
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
+		/* enable interface voltage rail, if needed */
+		if (ret == 0 && c->vcc_aux) {
+			ret = regulator_enable(c->vcc_aux);
+			if (ret < 0)
+				ret = mmc_regulator_set_ocr(c->vcc, 0);
+		}
 	} else {
-		ret = twl_mmc_set_voltage(c, 0);
+		if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+			ret = regulator_disable(c->vcc_aux);
+		if (ret == 0)
+			ret = mmc_regulator_set_ocr(c->vcc, 0);
 	}
 
 	return ret;
 }
 
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
-		int vdd)
-{
-	/*
-	 * Assume MMC3 has self-powered device connected, for example on-board
-	 * chip with external power source.
-	 */
-	return 0;
-}
-
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		mmc->init = twl_mmc_late_init;
 
-		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		/* note: twl4030 card detect GPIOs can disable VMMCx ... */
 		if (gpio_is_valid(c->gpio_cd)) {
-			mmc->init = twl_mmc_late_init;
 			mmc->cleanup = twl_mmc_cleanup;
 			mmc->suspend = twl_mmc_suspend;
 			mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
-		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
-		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that MMC3 device has it's own power source.
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
 		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
 
 		switch (c->mmc) {
 		case 1:
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
-			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
-			mmc->slots[0].set_power = twl_mmc2_set_power;
-			if (c->transceiver)
-				mmc->slots[0].ocr_mask = MMC2_OCR;
-			else
-				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
-			break;
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
 		case 3:
-			mmc->slots[0].set_power = twl_mmc3_set_power;
-			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			/* off-chip level shifting, or none */
+			mmc->slots[0].set_power = twl_mmc23_set_power;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e862429..3807c45c9a6 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
+	int	ocr_mask;	/* temporary HACK */
 };
 
-#if	defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
new file mode 100644
index 00000000000..4afadba0947
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -0,0 +1,46 @@
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA			0x48281804
+
+	__INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #0x0f
+hold:	ldr	r1, =OMAP4_AUX_CORE_BOOT1_PA	@ read from AuxCoreBoot1
+	ldr	r2, [r1]
+	cmp	r2, r0
+	bne	hold
+
+	/*
+	 * we've been released from the cpu_release,secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
new file mode 100644
index 00000000000..8fe8d230f21
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * If any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Update the AuxCoreBoot1 with boot state for secondary core.
+	 * omap_secondary_startup() routine will hold the secondary core till
+	 * the AuxCoreBoot1 register is updated with cpu state
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	smp_wmb();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout))
+		;
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/*
+	 * Write the address of secondary startup routine into the
+	 * AuxCoreBoot0 where ROM code will jump and start executing
+	 * on secondary core once out of WFE
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
+					OMAP4_AUXCOREBOOT_REG0);
+	smp_wmb();
+
+	/*
+	 * Send a 'sev' to wake the secondary core from WFE.
+	 */
+	set_event();
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "OMAP4: strange core count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "OMAP4: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		/*
+		 * Initialise the SCU and wake up the secondary core using
+		 * wakeup_secondary().
+		 */
+		scu_enable(scu_base);
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 00000000000..194189c746c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE	0x480bd400
+#define OMAP3_MMU2_BASE	0x5d000000
+#define OMAP3_MMU1_IRQ	24
+#define OMAP3_MMU2_IRQ	28
+
+
+static unsigned long iommu_base[] __initdata = {
+	OMAP3_MMU1_BASE,
+	OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+	OMAP3_MMU1_IRQ,
+	OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+	{
+		.name = "isp",
+		.nr_tlb_entries = 8,
+		.clk_name = "cam_ick",
+	},
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+	{
+		.name = "iva2",
+		.nr_tlb_entries = 32,
+		.clk_name = "iva2_ck",
+	},
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+	int i, err;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+		struct platform_device *pdev;
+		struct resource res[2];
+
+		pdev = platform_device_alloc("omap-iommu", i);
+		if (!pdev) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+
+		memset(res, 0,  sizeof(res));
+		res[0].start = iommu_base[i];
+		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = res[1].end = iommu_irq[i];
+		res[1].flags = IORESOURCE_IRQ;
+
+		err = platform_device_add_resources(pdev, res,
+						    ARRAY_SIZE(res));
+		if (err)
+			goto err_out;
+		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+					       sizeof(omap3_iommu_pdata[0]));
+		if (err)
+			goto err_out;
+		err = platform_device_add(pdev);
+		if (err)
+			goto err_out;
+		omap3_iommu_pdev[i] = pdev;
+	}
+	return 0;
+
+err_out:
+	while (i--)
+		platform_device_put(omap3_iommu_pdev[i]);
+	return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++)
+		platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 00000000000..6cc375a275b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg)    \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg)     \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+	struct reg {
+		const char *name;
+		u32 val;
+	} regs[32];
+	int reg_count = 0, i;
+	const char *s1 = NULL, *s2 = NULL;
+
+	if (!resume) {
+#if 0
+		/* MPU */
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+		/* INTC */
+		DUMP_INTC_REG(INTC_MIR0, 0x0084);
+		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+		}
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+		/* DSP */
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+		}
+#endif
+	} else {
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+		if (cpu_is_omap24xx())
+			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+	}
+
+	switch (mode) {
+	case 0:
+		s1 = "full";
+		s2 = "retention";
+		break;
+	case 1:
+		s1 = "MPU";
+		s2 = "retention";
+		break;
+	case 2:
+		s1 = "MPU";
+		s2 = "idle";
+		break;
+	}
+
+	if (!resume)
+#ifdef CONFIG_NO_HZ
+		printk(KERN_INFO
+		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+					jiffies));
+#else
+		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+	else
+		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+			us / 1000, us % 1000);
+
+	for (i = 0; i < reg_count; i++)
+		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceaed09c..00000000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
-	local_irq_disable();
-	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
-
-	omap2_sram_idle();
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
-	return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
-	return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap2_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void omap2_pm_finish(void)
-{
-	pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap2_pm_prepare,
-	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
-	return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 00000000000..f7b3baf7667
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 00000000000..db1025562fb
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+				  void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+	f2 &= ~OMAP24XX_EN_UART3;
+
+	if (f1 | f2)
+		return 1;
+	return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+	u32 l;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* There is 1 reference hold for all children of the oscillator
+	 * clock, the following will remove it. If no one else uses the
+	 * oscillator itself it will be disabled if/when we enter retention
+	 * mode.
+	 */
+	clk_disable(osc_ck);
+
+	/* Clear old wake-up events */
+	/* REVISIT: These write to reserved bits? */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Workaround to kill USB */
+	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+	omap2_gpio_prepare_for_retention();
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(0, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	/* One last check for pending IRQs to avoid extra latency due
+	 * to sleeping unnecessarily. */
+	if (omap_irq_pending())
+		goto no_sleep;
+
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	/* Jump to SRAM suspend code */
+	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_POWER));
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+
+no_sleep:
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(0, 1, tmp);
+	}
+	omap2_gpio_resume_after_retention();
+
+	clk_enable(osc_ck);
+
+	/* clear CORE wake-up events */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+	prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+	/* MPU domain wake events */
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x01)
+		prm_write_mod_reg(0x01, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x20)
+		prm_write_mod_reg(0x20, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+	/* Mask future PRCM-to-MPU interrupts */
+	prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+	u32 l;
+
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+		return 0;
+	/* Check for UART3. */
+	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3)
+		return 0;
+	if (sti_console_enabled)
+		return 0;
+
+	return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+	int only_idle = 0;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* Putting MPU into the WFI state while a transfer is active
+	 * seems to cause the I2C block to timeout. Why? Good question. */
+	if (omap2_i2c_active())
+		return;
+
+	/* The peripherals seem not to be able to wake up the MPU when
+	 * it is in retention mode. */
+	if (omap2_allow_mpu_retention()) {
+		/* REVISIT: These write to reserved bits? */
+		prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+		prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+		prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+		/* Try to enter MPU retention */
+		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+				  OMAP_LOGICRETSTATE,
+				  MPU_MOD, PM_PWSTCTRL);
+	} else {
+		/* Block MPU retention */
+
+		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+		only_idle = 1;
+	}
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	omap2_sram_idle();
+
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+	}
+}
+
+static int omap2_can_sleep(void)
+{
+	if (omap2_fclks_active())
+		return 0;
+	if (osc_ck->usecount > 1)
+		return 0;
+	if (omap_dma_running())
+		return 0;
+
+	return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap2_can_sleep()) {
+		if (omap_irq_pending())
+			goto out;
+		omap2_enter_mpu_retention();
+		goto out;
+	}
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap2_enter_full_retention();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+	/* We cannot sleep in idle until we have resumed */
+	disable_hlt();
+	return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+	u32 wken_wkup, mir1;
+
+	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+	/* Mask GPT1 */
+	mir1 = omap_readl(0x480fe0a4);
+	omap_writel(1 << 5, 0x480fe0ac);
+
+	omap_uart_prepare_suspend();
+	omap2_enter_full_retention();
+
+	omap_writel(mir1, 0x480fe0a4);
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+	return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap2_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap2_pm_prepare,
+	.enter		= omap2_pm_enter,
+	.finish		= omap2_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+	int i, num_mem_banks;
+	struct powerdomain *pwrdm;
+
+	/* Enable autoidle */
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+			  OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+	/* Set all domain wakeup dependencies */
+	prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+	if (cpu_is_omap2430())
+		prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+	/*
+	 * Set CORE powerdomain memory banks to retain their contents
+	 * during RETENTION
+	 */
+	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+	for (i = 0; i < num_mem_banks; i++)
+		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+	/* Set CORE powerdomain's next power state to RETENTION */
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Force-power down DSP, GFX powerdomains */
+
+	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(dsp_clkdm);
+
+	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(gfx_clkdm);
+
+	/* Enable clockdomain hardware-supervised control for all clkdms */
+	clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+	/* Enable clock autoidle for all domains */
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+			 OMAP24XX_AUTO_MAILBOXES |
+			 OMAP24XX_AUTO_WDT4 |
+			 OMAP2420_AUTO_WDT3 |
+			 OMAP24XX_AUTO_MSPRO |
+			 OMAP2420_AUTO_MMC |
+			 OMAP24XX_AUTO_FAC |
+			 OMAP2420_AUTO_EAC |
+			 OMAP24XX_AUTO_HDQ |
+			 OMAP24XX_AUTO_UART2 |
+			 OMAP24XX_AUTO_UART1 |
+			 OMAP24XX_AUTO_I2C2 |
+			 OMAP24XX_AUTO_I2C1 |
+			 OMAP24XX_AUTO_MCSPI2 |
+			 OMAP24XX_AUTO_MCSPI1 |
+			 OMAP24XX_AUTO_MCBSP2 |
+			 OMAP24XX_AUTO_MCBSP1 |
+			 OMAP24XX_AUTO_GPT12 |
+			 OMAP24XX_AUTO_GPT11 |
+			 OMAP24XX_AUTO_GPT10 |
+			 OMAP24XX_AUTO_GPT9 |
+			 OMAP24XX_AUTO_GPT8 |
+			 OMAP24XX_AUTO_GPT7 |
+			 OMAP24XX_AUTO_GPT6 |
+			 OMAP24XX_AUTO_GPT5 |
+			 OMAP24XX_AUTO_GPT4 |
+			 OMAP24XX_AUTO_GPT3 |
+			 OMAP24XX_AUTO_GPT2 |
+			 OMAP2420_AUTO_VLYNQ |
+			 OMAP24XX_AUTO_DSS,
+			 CORE_MOD, CM_AUTOIDLE1);
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+			 OMAP24XX_AUTO_SSI |
+			 OMAP24XX_AUTO_USB,
+			 CORE_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+			 OMAP24XX_AUTO_GPMC |
+			 OMAP24XX_AUTO_SDMA,
+			 CORE_MOD, CM_AUTOIDLE3);
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+			 OMAP24XX_AUTO_AES |
+			 OMAP24XX_AUTO_RNG |
+			 OMAP24XX_AUTO_SHA |
+			 OMAP24XX_AUTO_DES,
+			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+	/* Put DPLL and both APLLs into autoidle mode */
+	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+			 PLL_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+			 OMAP24XX_AUTO_WDT1 |
+			 OMAP24XX_AUTO_MPU_WDT |
+			 OMAP24XX_AUTO_GPIOS |
+			 OMAP24XX_AUTO_32KSYNC |
+			 OMAP24XX_AUTO_GPT1,
+			 WKUP_MOD, CM_AUTOIDLE);
+
+	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+	 * stabilisation */
+	prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+	/* Configure automatic voltage transition */
+	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_VOLTSETUP_OFFSET);
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+			  OMAP24XX_MEMRETCTRL |
+			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+	/* Enable wake-up events */
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+			  WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+	u32 l;
+
+	if (!cpu_is_omap24xx())
+		return -ENODEV;
+
+	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+	/* Look up important powerdomains, clockdomains */
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (!mpu_pwrdm)
+		pr_err("PM: mpu_pwrdm not found\n");
+
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	if (!core_pwrdm)
+		pr_err("PM: core_pwrdm not found\n");
+
+	dsp_clkdm = clkdm_lookup("dsp_clkdm");
+	if (!dsp_clkdm)
+		pr_err("PM: mpu_clkdm not found\n");
+
+	gfx_clkdm = clkdm_lookup("gfx_clkdm");
+	if (!gfx_clkdm)
+		pr_err("PM: gfx_clkdm not found\n");
+
+
+	osc_ck = clk_get(NULL, "osc_ck");
+	if (IS_ERR(osc_ck)) {
+		printk(KERN_ERR "could not get osc_ck\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap242x()) {
+		emul_ck = clk_get(NULL, "emul_ck");
+		if (IS_ERR(emul_ck)) {
+			printk(KERN_ERR "could not get emul_ck\n");
+			clk_put(osc_ck);
+			return -ENODEV;
+		}
+	}
+
+	prcm_setup_regs();
+
+	/* Hack to prevent MPU retention when STI console is enabled. */
+	{
+		const struct omap_sti_console_config *sti;
+
+		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+				      struct omap_sti_console_config);
+		if (sti != NULL && sti->enable)
+			sti_console_enabled = 1;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+						 omap24xx_idle_loop_suspend_sz);
+
+		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+						    omap24xx_cpu_suspend_sz);
+	}
+
+	suspend_set_ops(&omap_pm_ops);
+	pm_idle = omap2_pm_idle;
+
+	return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 00000000000..841d4c5ed8b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+	u32 saved_state;
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 wkst, irqstatus_mpu;
+	u32 fclk, iclk;
+
+	/* WKUP */
+	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+	}
+
+	/* CORE */
+	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+	}
+	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	}
+
+	/* PER */
+	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+	}
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		/* USBHOST */
+		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+		if (wkst) {
+			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_ICLKEN);
+			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_FCLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_ICLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_FCLKEN);
+			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+					  PM_WKST);
+			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+						PM_WKST))
+				cpu_relax();
+			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_ICLKEN);
+			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_FCLKEN);
+		}
+	}
+
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+		cpu_relax();
+
+	return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+	/* Variable to tell what needs to be saved and restored
+	 * in omap_sram_idle*/
+	/* save_state = 0 => Nothing to save and restored */
+	/* save_state = 1 => Only L1 and logic lost */
+	/* save_state = 2 => Only L2 lost */
+	/* save_state = 3 => L1, L2 and logic lost */
+	int save_state = 0, mpu_next_state;
+
+	if (!_omap_sram_idle)
+		return;
+
+	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+	switch (mpu_next_state) {
+	case PWRDM_POWER_RET:
+		/* No need to save context */
+		save_state = 0;
+		break;
+	default:
+		/* Invalid state */
+		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		return;
+	}
+	omap2_gpio_prepare_for_retention();
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	_omap_sram_idle(NULL, save_state);
+	cpu_init();
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+	omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+	fck_core1 = cm_read_mod_reg(CORE_MOD,
+				    CM_FCLKEN1);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		fck_core3 = cm_read_mod_reg(CORE_MOD,
+					    OMAP3430ES2_CM_FCLKEN3);
+		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+					  CM_FCLKEN);
+		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					      CM_FCLKEN);
+	} else
+		fck_sgx = cm_read_mod_reg(GFX_MOD,
+					  OMAP3430ES2_CM_FCLKEN3);
+	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+				  CM_FCLKEN);
+	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+				  CM_FCLKEN);
+	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+				  CM_FCLKEN);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+	fck_per &= ~OMAP3430_EN_UART3;
+
+	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+	    fck_cam | fck_per | fck_usbhost)
+		return 1;
+	return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+	if (!omap_uart_can_sleep())
+		return 0;
+	if (omap3_fclks_active())
+		return 0;
+	return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+	}
+
+err:
+	return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap3_can_sleep())
+		goto out;
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap_sram_idle();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+	struct power_state *pwrst;
+	int state, ret = 0;
+
+	/* Read current next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node)
+		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+	/* Set ones wanted by suspend */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+			goto restore;
+		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+			goto restore;
+	}
+
+	omap_uart_prepare_suspend();
+	omap_sram_idle();
+
+restore:
+	/* Restore next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+		if (state > pwrst->next_state) {
+			printk(KERN_INFO "Powerdomain (%s) didn't enter "
+			       "target state %d\n",
+			       pwrst->pwrdm->name, pwrst->next_state);
+			ret = -1;
+		}
+	}
+	if (ret)
+		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+	else
+		printk(KERN_INFO "Successfully put all powerdomains "
+		       "to target state\n");
+
+	return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap3_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap3_pm_prepare,
+	.enter		= omap3_pm_enter,
+	.finish		= omap3_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ *                   retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle.  This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+	/* ensure IVA2 clock is disabled */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* if no clock activity, nothing else to do */
+	if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	      OMAP3430_CLKACTIVITY_IVA2_MASK))
+		return;
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Enable IVA2 clock */
+	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+			 OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Set IVA2 boot mode to 'idle' */
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+	/* Un-reset IVA2 */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Disable IVA2 clock */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+	u16 mask, padconf;
+
+	/* In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+	/* reset modem */
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+			  CORE_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+	/* XXX Reset all wkdeps. This should be done when initializing
+	 * powerdomains */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+		prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	} else
+		prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+	/*
+	 * Enable interface clock autoidle for all modules.
+	 * Note that in the long run this should be done by clockfw
+	 */
+	cm_write_mod_reg(
+		OMAP3430_AUTO_MODEM |
+		OMAP3430ES2_AUTO_MMC3 |
+		OMAP3430ES2_AUTO_ICR |
+		OMAP3430_AUTO_AES2 |
+		OMAP3430_AUTO_SHA12 |
+		OMAP3430_AUTO_DES2 |
+		OMAP3430_AUTO_MMC2 |
+		OMAP3430_AUTO_MMC1 |
+		OMAP3430_AUTO_MSPRO |
+		OMAP3430_AUTO_HDQ |
+		OMAP3430_AUTO_MCSPI4 |
+		OMAP3430_AUTO_MCSPI3 |
+		OMAP3430_AUTO_MCSPI2 |
+		OMAP3430_AUTO_MCSPI1 |
+		OMAP3430_AUTO_I2C3 |
+		OMAP3430_AUTO_I2C2 |
+		OMAP3430_AUTO_I2C1 |
+		OMAP3430_AUTO_UART2 |
+		OMAP3430_AUTO_UART1 |
+		OMAP3430_AUTO_GPT11 |
+		OMAP3430_AUTO_GPT10 |
+		OMAP3430_AUTO_MCBSP5 |
+		OMAP3430_AUTO_MCBSP1 |
+		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES |
+		OMAP3430_AUTO_OMAPCTRL |
+		OMAP3430ES1_AUTO_FSHOSTUSB |
+		OMAP3430_AUTO_HSOTGUSB |
+		OMAP3430_AUTO_SAD2D |
+		OMAP3430_AUTO_SSI,
+		CORE_MOD, CM_AUTOIDLE1);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_PKA |
+		OMAP3430_AUTO_AES1 |
+		OMAP3430_AUTO_RNG |
+		OMAP3430_AUTO_SHA11 |
+		OMAP3430_AUTO_DES1,
+		CORE_MOD, CM_AUTOIDLE2);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430_AUTO_MAD2D |
+			OMAP3430ES2_AUTO_USBTLL,
+			CORE_MOD, CM_AUTOIDLE3);
+	}
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_WDT2 |
+		OMAP3430_AUTO_WDT1 |
+		OMAP3430_AUTO_GPIO1 |
+		OMAP3430_AUTO_32KSYNC |
+		OMAP3430_AUTO_GPT12 |
+		OMAP3430_AUTO_GPT1 ,
+		WKUP_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_DSS,
+		OMAP3430_DSS_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_CAM,
+		OMAP3430_CAM_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_GPIO6 |
+		OMAP3430_AUTO_GPIO5 |
+		OMAP3430_AUTO_GPIO4 |
+		OMAP3430_AUTO_GPIO3 |
+		OMAP3430_AUTO_GPIO2 |
+		OMAP3430_AUTO_WDT3 |
+		OMAP3430_AUTO_UART3 |
+		OMAP3430_AUTO_GPT9 |
+		OMAP3430_AUTO_GPT8 |
+		OMAP3430_AUTO_GPT7 |
+		OMAP3430_AUTO_GPT6 |
+		OMAP3430_AUTO_GPT5 |
+		OMAP3430_AUTO_GPT4 |
+		OMAP3430_AUTO_GPT3 |
+		OMAP3430_AUTO_GPT2 |
+		OMAP3430_AUTO_MCBSP4 |
+		OMAP3430_AUTO_MCBSP3 |
+		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_PER_MOD,
+		CM_AUTOIDLE);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_USBHOST_MOD,
+			CM_AUTOIDLE);
+	}
+
+	/*
+	 * Set all plls to autoidle. This is needed until autoidle is
+	 * enabled by clockfw
+	 */
+	cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+			 MPU_MOD,
+			 CM_AUTOIDLE2);
+	cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+			 PLL_MOD,
+			 CM_AUTOIDLE);
+	cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+			 PLL_MOD,
+			 CM_AUTOIDLE2);
+
+	/*
+	 * Enable control of expternal oscillator through
+	 * sys_clkreq. In the long run clock framework should
+	 * take care of this.
+	 */
+	prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+			     OMAP3430_GR_MOD,
+			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	/* setup wakup source */
+	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+			  WKUP_MOD, PM_WKEN);
+	/* No need to write EN_IO, that is always enabled */
+	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+			  OMAP3430_EN_GPT12,
+			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	/* For some reason IO doesn't generate wakeup event even if
+	 * it is selected to mpu wakeup goup */
+	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	omap3_iva_idle();
+	omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_RET;
+	list_add(&pwrst->node, &pwrst_list);
+
+	if (pwrdm_has_hdwr_sar(pwrdm))
+		pwrdm_enable_hdwr_sar(pwrdm);
+
+	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		omap2_clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		omap2_clkdm_sleep(clkdm);
+	return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+	struct power_state *pwrst, *tmp;
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+	/* XXX prcm_setup_regs needs to be before enabling hw
+	 * supervised mode for powerdomains */
+	prcm_setup_regs();
+
+	ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+			  (irq_handler_t)prcm_interrupt_handler,
+			  IRQF_DISABLED, "prcm", NULL);
+	if (ret) {
+		printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+		       INT_34XX_PRCM_MPU_IRQ);
+		goto err1;
+	}
+
+	ret = pwrdm_for_each(pwrdms_setup);
+	if (ret) {
+		printk(KERN_ERR "Failed to setup powerdomains\n");
+		goto err2;
+	}
+
+	(void) clkdm_for_each(clkdms_setup);
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (mpu_pwrdm == NULL) {
+		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+		goto err2;
+	}
+
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					 omap34xx_cpu_suspend_sz);
+
+	suspend_set_ops(&omap_pm_ops);
+
+	pm_idle = omap3_pm_idle;
+
+err1:
+	return ret;
+err2:
+	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+		list_del(&pwrst->node);
+		kfree(pwrst);
+	}
+	return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50ee495..cb1ae84e092 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
 #define OMAP3430_EN_GPT1				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index c6a7940f428..9fd03a2ec95 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -409,7 +409,7 @@
 /* PM_PREPWSTST_CAM specific bits */
 
 /* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
 
 /* RM_RSTST_PER specific bits */
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b806..9937e281469 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
  *
  */
 
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
  * Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
 
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
 
 #define OMAP3430_PM_IVAGRPSEL				0x00a8
 #define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
 
 #define OMAP3430_PM_PREPWSTST				0x00e8
 
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 00000000000..02e1c2d4705
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 00000000000..3751d293cb1
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060cb4b..2045441e838 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT		3
+#define SDRC_POWER_PWDENA_SHIFT			2
+#define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
 {
 	struct omap_sdrc_params *sp;
 
+	if (!sdrc_init_params)
+		return NULL;
+
 	sp = sdrc_init_params;
 
-	while (sp->rate != r)
+	while (sp->rate && sp->rate != r)
 		sp++;
 
 	if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 	omap2_sms_base = omap2_globals->sms;
 }
 
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
 void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 {
 	u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
 	sdrc_init_params = sp;
+
+	/* XXX Enable SRFRONIDLEREQ here also? */
+	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+		(1 << SDRC_POWER_PWDENA_SHIFT) |
+		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5ae9f..feaec7eaf6b 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
-	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	if (cpu_is_omap2420())
+		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+	else
+		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c285b..b094c15bfe4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
  * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
+ * Major rework for PM support by Kevin Hilman
+ *
  * Based off of arch/arm/mach-omap/omap1/serial.c
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -21,9 +26,50 @@
 
 #include <mach/common.h>
 #include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
 
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+	int num;
+	int can_sleep;
+	struct timer_list timer;
+	u32 timeout;
+
+	void __iomem *wk_st;
+	void __iomem *wk_en;
+	u32 wk_mask;
+	u32 padconf;
+
+	struct clk *ick;
+	struct clk *fck;
+	int clocked;
+
+	struct plat_serial8250_port *p;
+	struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+	int context_valid;
+
+	/* Registers to be saved/restored for OFF-mode */
+	u16 dll;
+	u16 dlh;
+	u16 ier;
+	u16 sysc;
+	u16 scr;
+	u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
+	struct plat_serial8250_port *p = uart->p;
+
 	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
 	serial_write_reg(p, UART_OMAP_SCR, 0x08);
 	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
 {
-	int i;
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		if (uart_ick[i] && uart_fck[i]) {
-			if (enable) {
-				clk_enable(uart_ick[i]);
-				clk_enable(uart_fck[i]);
-			} else {
-				clk_disable(uart_ick[i]);
-				clk_disable(uart_fck[i]);
+	u16 lcr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	lcr = serial_read_reg(p, UART_LCR);
+	serial_write_reg(p, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(p, UART_DLL);
+	uart->dlh = serial_read_reg(p, UART_DLM);
+	serial_write_reg(p, UART_LCR, lcr);
+	uart->ier = serial_read_reg(p, UART_IER);
+	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+	uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+	u16 efr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	if (!uart->context_valid)
+		return;
+
+	uart->context_valid = 0;
+
+	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(p, UART_EFR);
+	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, 0x0);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_DLL, uart->dll);
+	serial_write_reg(p, UART_DLM, uart->dlh);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, uart->ier);
+	serial_write_reg(p, UART_FCR, 0xA1);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_EFR, efr);
+	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(p, UART_OMAP_WER, uart->wer);
+	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+	if (uart->clocked)
+		return;
+
+	clk_enable(uart->ick);
+	clk_enable(uart->fck);
+	uart->clocked = 1;
+	omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_save_context(uart);
+	uart->clocked = 0;
+	clk_disable(uart->ick);
+	clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+					  int enable)
+{
+	struct plat_serial8250_port *p = uart->p;
+	u16 sysc;
+
+	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+	if (enable)
+		sysc |= 0x2 << 3;
+	else
+		sysc |= 0x1 << 3;
+
+	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+	omap_uart_enable_clocks(uart);
+
+	omap_uart_smart_idle_enable(uart, 0);
+	uart->can_sleep = 0;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_smart_idle_enable(uart, 1);
+	uart->can_sleep = 1;
+	del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+	struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+	omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num && uart->can_sleep) {
+			omap_uart_disable_clocks(uart);
+			return;
+		}
+	}
+}
+
+void omap_uart_resume_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num) {
+			omap_uart_enable_clocks(uart);
+
+			/* Check for IO pad wakeup */
+			if (cpu_is_omap34xx() && uart->padconf) {
+				u16 p = omap_ctrl_readw(uart->padconf);
+
+				if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+					omap_uart_block_sleep(uart);
 			}
+
+			/* Check for normal UART wakeup */
+			if (__raw_readl(uart->wk_st) & uart->wk_mask)
+				omap_uart_block_sleep(uart);
+
+			return;
 		}
 	}
 }
 
+void omap_uart_prepare_suspend(void)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		omap_uart_allow_sleep(uart);
+	}
+}
+
+int omap_uart_can_sleep(void)
+{
+	struct omap_uart_state *uart;
+	int can_sleep = 1;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (!uart->clocked)
+			continue;
+
+		if (!uart->can_sleep) {
+			can_sleep = 0;
+			continue;
+		}
+
+		/* This UART can now safely sleep. */
+		omap_uart_allow_sleep(uart);
+	}
+
+	return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred.  It does _nothing_ to handle the interrupt.  Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+	struct omap_uart_state *uart = dev_id;
+
+	omap_uart_block_sleep(uart);
+
+	return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+	u32 v;
+	struct plat_serial8250_port *p = uart->p;
+	int ret;
+
+	uart->can_sleep = 0;
+	uart->timeout = sleep_timeout;
+	setup_timer(&uart->timer, omap_uart_idle_timer,
+		    (unsigned long) uart);
+	mod_timer(&uart->timer, jiffies + uart->timeout);
+	omap_uart_smart_idle_enable(uart, 0);
+
+	if (cpu_is_omap34xx()) {
+		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 wk_mask = 0;
+		u32 padconf = 0;
+
+		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+		uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP3430_ST_UART1_MASK;
+			padconf = 0x182;
+			break;
+		case 1:
+			wk_mask = OMAP3430_ST_UART2_MASK;
+			padconf = 0x17a;
+			break;
+		case 2:
+			wk_mask = OMAP3430_ST_UART3_MASK;
+			padconf = 0x19e;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+		uart->padconf = padconf;
+	} else if (cpu_is_omap24xx()) {
+		u32 wk_mask = 0;
+
+		if (cpu_is_omap2430()) {
+			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		} else if (cpu_is_omap2420()) {
+			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		}
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP24XX_ST_UART1_MASK;
+			break;
+		case 1:
+			wk_mask = OMAP24XX_ST_UART2_MASK;
+			break;
+		case 2:
+			wk_mask = OMAP24XX_ST_UART3_MASK;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+	} else {
+		uart->wk_en = 0;
+		uart->wk_st = 0;
+		uart->wk_mask = 0;
+		uart->padconf = 0;
+	}
+
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v;
+
+		v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+
+	p->flags |= UPF_SHARE_IRQ;
+	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+			  "serial idle", (void *)uart);
+	WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	struct omap_uart_state *uart;
+	unsigned int value;
+
+	if (sscanf(buf, "%u", &value) != 1) {
+		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		return -EINVAL;
+	}
+	sleep_timeout = value * HZ;
+	list_for_each_entry(uart, &uart_list, node) {
+		uart->timeout = sleep_timeout;
+		if (uart->timeout)
+			mod_timer(&uart->timer, jiffies + uart->timeout);
+		else
+			/* A zero value means disable timeout feature */
+			omap_uart_block_sleep(uart);
+	}
+	return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
 void __init omap_serial_init(void)
 {
-	int i;
+	int i, err;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
+	if (cpu_is_omap44xx()) {
+		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+			serial_platform_data[i].irq += 32;
+	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct plat_serial8250_port *p = serial_platform_data + i;
+		struct omap_uart_state *uart = &omap_uart[i];
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
 		}
 
 		sprintf(name, "uart%d_ick", i+1);
-		uart_ick[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_ick[i])) {
+		uart->ick = clk_get(NULL, name);
+		if (IS_ERR(uart->ick)) {
 			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
-			uart_ick[i] = NULL;
-		} else
-			clk_enable(uart_ick[i]);
+			uart->ick = NULL;
+		}
 
 		sprintf(name, "uart%d_fck", i+1);
-		uart_fck[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_fck[i])) {
+		uart->fck = clk_get(NULL, name);
+		if (IS_ERR(uart->fck)) {
 			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
-			uart_fck[i] = NULL;
-		} else
-			clk_enable(uart_fck[i]);
+			uart->fck = NULL;
+		}
 
-		omap_serial_reset(p);
+		if (!uart->ick || !uart->fck)
+			continue;
+
+		uart->num = i;
+		p->private_data = uart;
+		uart->p = p;
+		list_add(&uart->node, &uart_list);
+
+		omap_uart_enable_clocks(uart);
+		omap_uart_reset(uart);
+		omap_uart_idle_init(uart);
 	}
-}
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
+	err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+	if (!err)
+		err = sysfs_create_file(&serial_device.dev.kobj,
+					&sleep_timeout_attr.attr);
+#endif
 
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
 }
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e96105e1..130aadbfa08 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
 
 #include <mach/omap24xx.h>
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 00000000000..e5e2553e79a
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
+				       * available */
+#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
+				OMAP343X_CONTROL_MEM_WKUP +\
+				SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+	.text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+        stmfd   sp!, {lr}     @ save registers on stack
+	adr	r0, restore
+        ldmfd   sp!, {pc}     @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+        .word   . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+loop:
+	/*b	loop*/	@Enable to debug by stepping through code
+	/* r0 contains restore pointer in sdram */
+	/* r1 contains information about saving context */
+	ldr     r4, sdrc_power          @ read the SDRC_POWER register
+	ldr     r5, [r4]                @ read the contents of SDRC_POWER
+	orr     r5, r5, #0x40           @ enable self refresh on idle req
+	str     r5, [r4]                @ write back to SDRC_POWER register
+
+	cmp	r1, #0x0
+	/* If context save is required, do that and execute wfi */
+	bne	save_context_wfi
+	/* Data memory barrier and Data sync barrier */
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c10, 4
+	mcr	p15, 0, r1, c7, c10, 5
+
+	wfi				@ wait for interrupt
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore:
+	/* b restore*/ 	@ Enable to debug restore code
+        /* Check what was the reason for mpu reset and store the reason in r9*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost - In this case, we wont be here */
+        /* 3 - Both L1 and L2 lost */
+	ldr     r1, pm_pwstctrl_mpu
+	ldr	r2, [r1]
+	and     r2, r2, #0x3
+	cmp     r2, #0x0	@ Check if target power state was OFF or RET
+        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
+	bne	logic_l1_restore
+	/* Execute smi to invalidate L2 cache */
+	mov r12, #0x1                         @ set up to invalide L2
+smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+logic_l1_restore:
+	mov	r1, #0
+	/* Invalidate all instruction caches to PoU
+	 * and flush branch target cache */
+	mcr	p15, 0, r1, c7, c5, 0
+
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldmia	r3!, {r4-r6}
+	mov	sp, r4
+	msr	spsr_cxsf, r5
+	mov	lr, r6
+
+	ldmia	r3!, {r4-r9}
+	/* Coprocessor access Control Register */
+	mcr p15, 0, r4, c1, c0, 2
+
+	/* TTBR0 */
+	MCR p15, 0, r5, c2, c0, 0
+	/* TTBR1 */
+	MCR p15, 0, r6, c2, c0, 1
+	/* Translation table base control register */
+	MCR p15, 0, r7, c2, c0, 2
+	/*domain access Control Register */
+	MCR p15, 0, r8, c3, c0, 0
+	/* data fault status Register */
+	MCR p15, 0, r9, c5, c0, 0
+
+	ldmia  r3!,{r4-r8}
+	/* instruction fault status Register */
+	MCR p15, 0, r4, c5, c0, 1
+	/*Data Auxiliary Fault Status Register */
+	MCR p15, 0, r5, c5, c1, 0
+	/*Instruction Auxiliary Fault Status Register*/
+	MCR p15, 0, r6, c5, c1, 1
+	/*Data Fault Address Register */
+	MCR p15, 0, r7, c6, c0, 0
+	/*Instruction Fault Address Register*/
+	MCR p15, 0, r8, c6, c0, 2
+	ldmia  r3!,{r4-r7}
+
+	/* user r/w thread and process ID */
+	MCR p15, 0, r4, c13, c0, 2
+	/* user ro thread and process ID */
+	MCR p15, 0, r5, c13, c0, 3
+	/*Privileged only thread and process ID */
+	MCR p15, 0, r6, c13, c0, 4
+	/* cache size selection */
+	MCR p15, 2, r7, c0, c0, 0
+	ldmia  r3!,{r4-r8}
+	/* Data TLB lockdown registers */
+	MCR p15, 0, r4, c10, c0, 0
+	/* Instruction TLB lockdown registers */
+	MCR p15, 0, r5, c10, c0, 1
+	/* Secure or Nonsecure Vector Base Address */
+	MCR p15, 0, r6, c12, c0, 0
+	/* FCSE PID */
+	MCR p15, 0, r7, c13, c0, 0
+	/* Context PID */
+	MCR p15, 0, r8, c13, c0, 1
+
+	ldmia  r3!,{r4-r5}
+	/* primary memory remap register */
+	MCR p15, 0, r4, c10, c2, 0
+	/*normal memory remap register */
+	MCR p15, 0, r5, c10, c2, 1
+
+	/* Restore cpsr */
+	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
+	msr	cpsr, r4	/*store cpsr */
+
+	/* Enabling MMU here */
+	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	and	r7, #0x7
+	cmp	r7, #0x0
+	beq	usettbr0
+ttbr_error:
+	/* More work needs to be done to support N[0:2] value other than 0
+	* So looping here so that the error can be detected
+	*/
+	b	ttbr_error
+usettbr0:
+	mrc	p15, 0, r2, c2, c0, 0
+	ldr	r5, ttbrbit_mask
+	and	r2, r5
+	mov	r4, pc
+	ldr	r5, table_index_mask
+	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	/* Extract the value to be written to table entry */
+	ldr	r1, table_entry
+	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* Getting the address of table entry to modify */
+	lsr	r4, #18
+	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* Storing previous entry of location being modified */
+	ldr	r5, scratchpad_base
+	ldr	r4, [r2]
+	str	r4, [r5, #0xC0]
+	/* Modify the table entry */
+	str	r1, [r2]
+	/* Storing address of entry being modified
+	 * - will be restored after enabling MMU */
+	ldr	r5, scratchpad_base
+	str	r2, [r5, #0xC4]
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
+	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
+	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
+	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
+	/* Restore control register  but dont enable caches here*/
+	/* Caches will be enabled after restoring MMU table entry */
+	ldmia	r3!, {r4}
+	/* Store previous value of control register in scratchpad */
+	str	r4, [r5, #0xC8]
+	ldr	r2, cache_pred_disable_mask
+	and	r4, r2
+	mcr	p15, 0, r4, c1, c0, 0
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+save_context_wfi:
+	/*b	save_context_wfi*/	@ enable to debug save code
+	mov	r8, r0 /* Store SDRAM address in r8 */
+        /* Check what that target sleep state is:stored in r1*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost */
+        /* 3 - Both L1 and L2 lost */
+	cmp	r1, #0x2 /* Only L2 lost */
+	beq	clean_l2
+	cmp	r1, #0x1 /* L2 retained */
+	/* r9 stores whether to clean L2 or not*/
+	moveq	r9, #0x0 /* Dont Clean L2 */
+	movne	r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/* Domain access control register, data fault status register,
+	and instruction fault status register */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Data aux fault status register, instruction aux fault status,
+	datat fault address register and instruction fault address register*/
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/* user r/w thread and process ID, user r/o thread and process ID,
+	priv only thread and process ID, cache size selection */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+clean_caches:
+	/* Clean Data or unified cache to POU*/
+	/* How to invalidate only L1 cache???? - #FIX_ME# */
+	/* mcr	p15, 0, r11, c7, c11, 1 */
+	cmp	r9, #1 /* Check whether L2 inval is required or not*/
+	bne	skip_l2_inval
+clean_l2:
+	/* read clidr */
+	mrc     p15, 1, r0, c0, c0, 1
+	/* extract loc from clidr */
+	ands    r3, r0, #0x7000000
+	/* left align loc bit field */
+	mov     r3, r3, lsr #23
+	/* if loc is 0, then no need to clean */
+	beq     finished
+	/* start clean at cache level 0 */
+	mov     r10, #0
+loop1:
+	/* work out 3x current cache level */
+	add     r2, r10, r10, lsr #1
+	/* extract cache type bits from clidr*/
+	mov     r1, r0, lsr r2
+	/* mask of the bits for current cache only */
+	and     r1, r1, #7
+	/* see what cache we have at this level */
+	cmp     r1, #2
+	/* skip if no cache, or just i-cache */
+	blt     skip
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	/* isb to sych the new cssr&csidr */
+	isb
+	/* read the new csidr */
+	mrc     p15, 1, r1, c0, c0, 0
+	/* extract the length of the cache lines */
+	and     r2, r1, #7
+	/* add 4 (line length offset) */
+	add     r2, r2, #4
+	ldr     r4, assoc_mask
+	/* find maximum number on the way size */
+	ands    r4, r4, r1, lsr #3
+	/* find bit position of way size increment */
+	clz     r5, r4
+	ldr     r7, numset_mask
+	/* extract max number of the index size*/
+	ands    r7, r7, r1, lsr #13
+loop2:
+	mov     r9, r4
+	/* create working copy of max way size*/
+loop3:
+	/* factor way and cache number into r11 */
+	orr     r11, r10, r9, lsl r5
+	/* factor index number into r11 */
+	orr     r11, r11, r7, lsl r2
+	/*clean & invalidate by set/way */
+	mcr     p15, 0, r11, c7, c10, 2
+	/* decrement the way*/
+	subs    r9, r9, #1
+	bge     loop3
+	/*decrement the index */
+	subs    r7, r7, #1
+	bge     loop2
+skip:
+	add     r10, r10, #2
+	/* increment cache number */
+	cmp     r3, r10
+	bgt     loop1
+finished:
+	/*swith back to cache level 0 */
+	mov     r10, #0
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	isb
+skip_l2_inval:
+	/* Data memory barrier and Data sync barrier */
+	mov     r1, #0
+	mcr     p15, 0, r1, c7, c10, 4
+	mcr     p15, 0, r1, c7, c10, 5
+
+	wfi                             @ wait for interrupt
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+	/* restore regs and return */
+	ldmfd   sp!, {r0-r12, pc}
+
+i_dll_wait:
+	ldr     r4, clk_stabilize_delay
+
+i_dll_delay:
+	subs    r4, r4, #0x1
+	bne     i_dll_delay
+	ldr     r4, sdrc_power
+	ldr     r5, [r4]
+	bic     r5, r5, #0x40
+	str     r5, [r4]
+	bx	lr
+pm_prepwstst_core:
+	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+	.word	PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sdrc_power:
+	.word SDRC_POWER_V
+context_mem:
+	.word	0x803E3E14
+clk_stabilize_delay:
+	.word 0x000001FF
+assoc_mask:
+	.word	0x3ff
+numset_mask:
+	.word	0x7fff
+ttbrbit_mask:
+	.word	0xFFFFC000
+table_index_mask:
+	.word	0xFFF00000
+table_entry:
+	.word	0x00000C02
+cache_pred_disable_mask:
+	.word	0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd349022..bb299851116 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
 omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap242x_sdi_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
 omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap242x_srs_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap242x_ssp_set_config:
-	.word OMAP242X_PRCM_CLKCFG_CTRL
+	.word OMAP2420_PRCM_CLKCFG_CTRL
 omap242x_ssp_pll_ctl:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e269e8..9955abcaeb3 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
 omap243x_sdi_sdrc_dlla_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap243x_sdi_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
 omap243x_srs_sdrc_rfr_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap243x_srs_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap243x_ssp_set_config:
-	.word OMAP243X_PRCM_CLKCFG_CTRL
+	.word OMAP2430_PRCM_CLKCFG_CTRL
 omap243x_ssp_pll_ctl:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c714613634..c080c82521e 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
 /*
  * Change frequency of core dpll
  * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ *      SDRC rates < 83MHz
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	ldr	r4, [sp, #52]		@ pull extra args off the stack
+	dsb				@ flush buffered writes to interconnect
 	cmp	r3, #0x2
 	blne	configure_sdrc
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	unlock_dll
 	blne	lock_dll
-	cmp	r3, #0x1
-	blne	unlock_dll
 	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
 	bl 	configure_core_dpll
 	bl	enable_sdrc
-	cmp	r3, #0x1
-	blne	wait_dll_unlock
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	wait_dll_unlock
 	blne	wait_dll_lock
 	cmp	r3, #0x1
 	blne	configure_sdrc
+	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
 unlock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	orr	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	orr	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	bic	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	bic	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
-	mov	r5, #0x0		@ Move 0 to R5
-	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
-	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r5, [r4]		@ read the contents of SDRC_POWER
-	orr 	r5, r5, #0x40		@ enable self refresh on idle req
-	str 	r5, [r4]		@ write back to SDRC_POWER register
-	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r5, [r4]
-	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
-	str 	r5, [r4]
+	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r12, [r11]		@ read the contents of SDRC_POWER
+	mov	r9, r12			@ keep a copy of SDRC_POWER bits
+	orr 	r12, r12, #0x40		@ enable self refresh on idle req
+	bic 	r12, r12, #0x4		@ clear PWDENA
+	str 	r12, [r11]		@ write back to SDRC_POWER register
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
+	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r12, [r11]
+	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr 	r5, [r4]
-	and 	r5, r5, #0x2		@ check for SDRC idle
-	cmp 	r5, #2
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr 	r12, [r11]
+	and 	r12, r12, #0x2		@ check for SDRC idle
+	cmp 	r12, #2
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
-	ldr 	r4, omap3_cm_clksel1_pll
-	ldr	r5, [r4]
-	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
-	and	r5, r5, r6
-	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
-	str	r5, [r4]
-	mov 	r5, #0x800		@ wait for the clock to stabilise
+	ldr 	r11, omap3_cm_clksel1_pll
+	ldr	r12, [r11]
+	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
+	and	r12, r12, r10
+	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r12, [r11]
+	ldr	r12, [r11]		@ posted-write barrier for CM
+	mov 	r12, #0x800		@ wait for the clock to stabilise
 	cmp	r3, #2
 	bne	wait_clk_stable
 	bx	lr
 wait_clk_stable:
-	subs 	r5, r5, #1
+	subs 	r12, r12, #1
 	bne	wait_clk_stable
 	nop
 	nop
@@ -116,42 +121,42 @@ wait_clk_stable:
 	nop
 	bx	lr
 enable_sdrc:
-	ldr 	r4, omap3_cm_iclken1_core
-	ldr	r5, [r4]
-	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
-	str 	r5, [r4]
+	ldr 	r11, omap3_cm_iclken1_core
+	ldr	r12, [r11]
+	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle1:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr	r5, [r4]
-	and 	r5, r5, #0x2
-	cmp	r5, #0
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr	r12, [r11]
+	and 	r12, r12, #0x2
+	cmp	r12, #0
 	bne	wait_sdrc_idle1
-	ldr	r4, omap3_sdrc_power
-	ldr	r5, [r4]
-	bic 	r5, r5, #0x40
-	str 	r5, [r4]
+restore_sdrc_power_val:
+	ldr	r11, omap3_sdrc_power
+	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
 	bx	lr
 wait_dll_lock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and 	r5, r5, #0x4
-	cmp	r5, #0x4
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and 	r12, r12, #0x4
+	cmp	r12, #0x4
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x0
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and	r12, r12, #0x4
+	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r4, omap3_sdrc_rfr_ctrl
-	str	r0, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrla
-	str	r1, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrlb
-	str	r2, [r4]
+	ldr	r11, omap3_sdrc_rfr_ctrl
+	str	r0, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrla
+	str	r1, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrlb
+	str	r2, [r11]
+	ldr	r2, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090..97eeeebcb06 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
  *
  * Some parts based off of TI's 24xx code:
  *
- *   Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
  *
  * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
@@ -37,6 +38,7 @@
 
 #include <asm/mach/time.h>
 #include <mach/dmtimer.h>
+#include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
@@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
-
+		if (cpu_is_omap44xx())
+			period = 0xff;	/* FIXME: */
 		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void)
 		     "timer-gp: omap_dm_timer_set_source() failed\n");
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+	if (cpu_is_omap44xx())
+		/* Assuming 32kHz clk is driving GPT1 */
+		tick_rate = 32768;	/* FIXME: */
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
 		gptimer_id, tick_rate);
@@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void)
 
 static void __init omap2_gp_timer_init(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
 	omap_dm_timer_init();
 
 	omap2_gp_clockevent_init();
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
new file mode 100644
index 00000000000..c1a650a9910
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -0,0 +1,34 @@
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = INT_44XX_LOCALTIMER_IRQ;
+	twd_timer_setup(evt);
+}
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a136ef..d85296dc896 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
 
+#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+	/* Ensure force-idle mode for OTG controller */
+	if (cpu_is_omap34xx())
+		omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
 		.flags	= IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
+
+	usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+	usb_musb_pm_init();
 }
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8df55f40f4c..8622c24cd27 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
 	unsigned	sysclk_ps;
 	int		status;
 
-	if (!refclk_psec || sysclk_ps == 0)
+	if (!refclk_psec || fclk_ps == 0)
 		return -ENODEV;
 
 	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index c14d1213727..6f3f77d031d 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
+#include <linux/errno.h>
 #include <mach/hardware.h>
 #include "common.h"
 
@@ -44,6 +45,7 @@
 #define TARGET_DEV_BUS		1
 #define TARGET_PCI		3
 #define TARGET_PCIE		4
+#define TARGET_SRAM		9
 #define ATTR_PCIE_MEM		0x59
 #define ATTR_PCIE_IO		0x51
 #define ATTR_PCIE_WA		0x79
@@ -53,6 +55,7 @@
 #define ATTR_DEV_CS1		0x1d
 #define ATTR_DEV_CS2		0x1b
 #define ATTR_DEV_BOOT		0xf
+#define ATTR_SRAM		0x0
 
 /*
  * Helpers to get DDR bank info
@@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	return 0;
 }
 
-static void __init setup_cpu_win(int win, u32 base, u32 size,
+static int __init setup_cpu_win(int win, u32 base, u32 size,
 				 u8 target, u8 attr, int remap)
 {
 	if (win >= 8) {
 		printk(KERN_ERR "setup_cpu_win: trying to allocate "
 				"window %d\n", win);
-		return;
+		return -ENOSPC;
 	}
 
 	writel(base & 0xffff0000, CPU_WIN_BASE(win));
@@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size,
 		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
 		writel(0, CPU_WIN_REMAP_HI(win));
 	}
+	return 0;
 }
 
 void __init orion5x_setup_cpu_mbus_bridge(void)
@@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 	setup_cpu_win(win_alloc_count++, base, size,
 		      TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
+
+int __init orion5x_setup_sram_win(void)
+{
+	return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+			ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 6af99ddabdf..eafcc49009e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -31,7 +31,7 @@
 #include <plat/ehci-orion.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= orion5x_eth_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
@@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 
 static struct resource orion5x_i2c_resources[] = {
 	{
-		.name	= "i2c base",
 		.start	= I2C_PHYS_BASE,
 		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.name	= "i2c irq",
 		.start	= IRQ_ORION5X_I2C,
 		.end	= IRQ_ORION5X_I2C,
 		.flags	= IORESOURCE_IRQ,
@@ -535,16 +536,52 @@ void __init orion5x_xor_init(void)
 	platform_device_register(&orion5x_xor1_channel);
 }
 
+static struct resource orion5x_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = ORION5X_CRYPTO_PHYS_BASE,
+		.end    = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = ORION5X_SRAM_PHYS_BASE,
+		.end    = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_ORION5X_CESA,
+		.end    = IRQ_ORION5X_CESA,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(orion5x_crypto_res),
+	.resource       = orion5x_crypto_res,
+};
+
+int __init orion5x_crypto_init(void)
+{
+	int ret;
+
+	ret = orion5x_setup_sram_win();
+	if (ret)
+		return ret;
+
+	return platform_device_register(&orion5x_crypto_device);
+}
 
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+static struct orion_wdt_platform_data orion5x_wdt_data = {
 	.tclk			= 0,
 };
 
 static struct platform_device orion5x_wdt_device = {
-	.name		= "orion5x_wdt",
+	.name		= "orion_wdt",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &orion5x_wdt_data,
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 798b9a5e3da..de483e83edd 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
 void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+int orion5x_setup_sram_win(void);
 
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
@@ -37,6 +38,7 @@ void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
+int orion5x_crypto_init(void);
 
 /*
  * PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index be896e59d3e..5c9744cd8ef 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -17,8 +17,8 @@
 
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
 
-#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET		0x0002
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET_OUT_EN	0x0002
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
 
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 377a773ae53..2d876657053 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -24,6 +24,7 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f2100000	PCI I/O space
+ * f2200000	SRAM dedicated for the crypto unit
  * f4000000	device bus mappings (boot)
  * fa000000	device bus mappings (cs0)
  * fa800000	device bus mappings (cs2)
@@ -49,6 +50,9 @@
 #define ORION5X_PCI_IO_BUS_BASE		0x00100000
 #define ORION5X_PCI_IO_SIZE		SZ_1M
 
+#define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
+#define ORION5X_SRAM_SIZE		SZ_8K
+
 /* Relevant only for Orion-1/Orion-NAS */
 #define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
 #define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
@@ -94,6 +98,8 @@
 #define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
 #define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
 
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
+
 #define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
 #define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
 
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index e912490fff2..60e734c1045 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
 	/*
 	 * Enable and issue soft reset
 	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
 }
 
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index e23a3f91d6c..bc4c3b9aaf8 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
 	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	while (mode->mpp >= 0) {
 		u32 *reg;
 		int num_type;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 41e6d5033d5..61c086b6672 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -181,9 +181,9 @@ static void mss2_power_off(void)
 	/*
 	 * Enable and issue soft reset
 	 */
-	reg = readl(CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
 	reg |= 1 << 2;
-	writel(reg, CPU_RESET_MASK);
+	writel(reg, RSTOUTn_MASK);
 
 	reg = readl(CPU_SOFT_RESET);
 	reg |= 1;
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0f9cdf45895..37b3d487529 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -25,6 +25,7 @@ struct fpga_devices {
 	/* Technologic Systems */
 	struct fpga_device 	ts_rtc;
 	struct fpga_device 	ts_nand;
+	struct fpga_device 	ts_rng;
 };
 
 struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 9a6b397f972..5041d1bc26b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -17,6 +17,7 @@
 #include <linux/m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/timeriomem-rng.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void)
 }
 
 /*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= TS_RNG_DATA,
+	.end		= TS_RNG_DATA + 4 - 1,
+};
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+	.period		= 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+	.name		= "timeriomem_rng",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_rng_data,
+	},
+	.resource	= &ts78xx_ts_rng_resource,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_rng.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_rng_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_rng.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_rng_device);
+
+	return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rng_device);
+}
+
+/*****************************************************************************
  * FPGA 'hotplug' support code
  ****************************************************************************/
 static void ts78xx_fpga_devices_zero_init(void)
 {
 	ts78xx_fpga.supports.ts_rtc.init = 0;
 	ts78xx_fpga.supports.ts_nand.init = 0;
+	ts78xx_fpga.supports.ts_rng.init = 0;
 }
 
 static void ts78xx_fpga_supports(void)
@@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void)
 	case TS7800_REV_5:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
+		ts78xx_fpga.supports.ts_rng.present = 1;
 		break;
 	default:
 		ts78xx_fpga.supports.ts_rtc.present = 0;
 		ts78xx_fpga.supports.ts_nand.present = 0;
+		ts78xx_fpga.supports.ts_rng.present = 0;
 	}
 }
 
@@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void)
 		}
 		ret |= tmp;
 	}
+	if (ts78xx_fpga.supports.ts_rng.present == 1) {
+		tmp = ts78xx_ts_rng_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		}
+		ret |= tmp;
+	}
 
 	return ret;
 }
@@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void)
 		ts78xx_ts_rtc_unload();
 	if (ts78xx_fpga.supports.ts_nand.present == 1)
 		ts78xx_ts_nand_unload();
+	if (ts78xx_fpga.supports.ts_rng.present == 1)
+		ts78xx_ts_rng_unload();
 
 	return ret;
 }
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 7ddc22c2bb5..69208217b22 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+	.port_names[0] = "lan3",
+	.port_names[1] = "lan4",
+	.port_names[2] = "wan",
+	.port_names[3] = "cpu",
+	.port_names[5] = "lan1",
+	.port_names[7] = "lan2",
+};
+
+static struct dsa_platform_data wnr854t_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &wnr854t_switch_chip_data,
+};
+
 static void __init wnr854t_init(void)
 {
 	/*
@@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
+	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd368a..f4533f8ff4e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -88,6 +94,10 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
@@ -280,6 +290,7 @@ config MACH_ZYLONITE
 	select PXA3xx
 	select PXA_SSP
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -308,6 +319,14 @@ config MACH_CM_X300
 	select PXA3xx
 	select CPU_PXA300
 
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -505,12 +524,6 @@ config PXA_SSP
 	help
 	  Enable support for PXA2xx SSP ports
 
-config PXA_PWM
-	tristate
-	default BACKLIGHT_PWM
-	help
-	  Enable support for PXA2xx/PXA3xx PWM controllers
-
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4e14b..d18ffef44b8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,6 @@ endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
-obj-$(CONFIG_PXA_PWM)		+= pwm.o
 
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index db52d2c4791..49ae3829231 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num)
 	for (i = 0; i < num; i++)
 		clkdev_add(&clks[i]);
 }
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-	struct device *dev)
-{
-	struct clk *r = clk_get(dev, id);
-	struct clk_lookup *l;
-
-	if (!r)
-		return -ENODEV;
-
-	l = clkdev_alloc(r, alias, alias_dev_name);
-	clk_put(r);
-	if (!l)
-		return -ENODEV;
-	clkdev_add(l);
-	return 0;
-}
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 34576ba5f5f..1d2cec25391 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -335,6 +335,10 @@ void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	cmx270_init_rtc();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index a9f48b1cb54..465da26591b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -21,18 +21,20 @@
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
+#include <linux/rtc-v3020.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/setup.h>
 
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa3xx_nand.h>
 
 #include <asm/mach/map.h>
@@ -46,6 +48,11 @@
 
 #define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
 
+#define GPIO95_RTC_CS		(95)
+#define GPIO96_RTC_WR		(96)
+#define GPIO97_RTC_RD		(97)
+#define GPIO98_RTC_IO		(98)
+
 static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
+	/* RTC GPIOs */
+	GPIO95_GPIO,			/* RTC CS */
+	GPIO96_GPIO,			/* RTC WR */
+	GPIO97_GPIO,			/* RTC RD */
+	GPIO98_GPIO,			/* RTC IO */
+
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
@@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
 	.enable_arbiter	= 1,
+	.keep_config	= 1,
 	.parts		= cm_x300_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
@@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void)
 static inline void cm_x300_init_i2c(void) {}
 #endif
 
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+	.use_gpio	= 1,
+	.gpio_cs	= GPIO95_RTC_CS,
+	.gpio_wr	= GPIO96_RTC_WR,
+	.gpio_rd	= GPIO97_RTC_RD,
+	.gpio_io	= GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+	.name		= "v3020",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_v3020_pdata,
+	}
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+	platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
 static void __init cm_x300_init(void)
 {
 	/* board-processor specific GPIO initialization */
@@ -453,6 +492,19 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_rtc();
+}
+
+static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (64*1024*1024);
+	mi->bank[1].start = 0xc0000000;
+	mi->bank[1].node = 0;
+	mi->bank[1].size = (64*1024*1024);
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
@@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
+	.fixup		= cm_x300_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 930e364ccde..962dda2e154 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -42,7 +42,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = {
 	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
-static void corgi_ads7846_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.cs_control	= corgi_ads7846_cs,
+	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
 };
 
 static void corgi_bl_kick_battery(void)
@@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
-static void corgi_lcdcon_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.cs_control	= corgi_lcdcon_cs,
+	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
 };
 
-static void corgi_max1111_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.cs_control	= corgi_max1111_cs,
+	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info corgi_spi_devices[] = {
@@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = {
 
 static void __init corgi_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
-	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
-	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
-
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-	return;
-
-err_free_2:
-	gpio_free(CORGI_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(CORGI_GPIO_ADS7846_CS);
 }
 #else
 static inline void corgi_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7f04b3a761d..a093282fe4d 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -41,7 +41,6 @@ static void corgi_charger_init(void)
 	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void corgi_measure_temp(int on)
@@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type)
 
 static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.init            = corgi_charger_init,
-	.exit            = sharpsl_pm_pxa_remove,
+	.exit            = NULL,
 	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
 	.gpio_acin       = CORGI_GPIO_AC_IN,
 	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 083a1d851d4..3a8ee2272ad 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -36,6 +36,8 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/pxa2xx-regs.h>
 
@@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #define freq_debug  0
 #endif
 
+static struct regulator *vcc_core;
+
 static unsigned int pxa27x_maxfreq;
 module_param(pxa27x_maxfreq, uint, 0);
 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
@@ -58,6 +62,8 @@ typedef struct {
 	unsigned int cccr;
 	unsigned int div2;
 	unsigned int cclkcfg;
+	int vmin;
+	int vmax;
 } pxa_freqs_t;
 
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
@@ -82,24 +88,24 @@ static unsigned int sdram_rows;
 
 static pxa_freqs_t pxa255_run_freqs[] =
 {
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
 };
 
 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
 static pxa_freqs_t pxa255_turbo_freqs[] =
 {
 	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
 };
 
 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
    ((T)  ? CCLKCFG_TURBO : 0))
 
 static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
 };
 
 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -163,6 +169,47 @@ static struct cpufreq_frequency_table
 
 extern unsigned get_clk_frequency_khz(int info);
 
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	int ret = 0;
+	int vmin, vmax;
+
+	if (!cpu_is_pxa27x())
+		return 0;
+
+	vmin = pxa_freq->vmin;
+	vmax = pxa_freq->vmax;
+	if ((vmin == -1) || (vmax == -1))
+		return 0;
+
+	ret = regulator_set_voltage(vcc_core, vmin, vmax);
+	if (ret)
+		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
+		       vmin, vmax);
+	return ret;
+}
+
+static __init void pxa_cpufreq_init_voltages(void)
+{
+	vcc_core = regulator_get(NULL, "vcc_core");
+	if (IS_ERR(vcc_core)) {
+		pr_info("cpufreq: Didn't find vcc_core regulator\n");
+		vcc_core = NULL;
+	} else {
+		pr_info("cpufreq: Found vcc_core regulator\n");
+	}
+}
+#else
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	return 0;
+}
+
+static __init void pxa_cpufreq_init_voltages(void) { }
+#endif
+
 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
 			     pxa_freqs_t **pxa_freqs)
 {
@@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	unsigned long flags;
 	unsigned int new_freq_cpu, new_freq_mem;
 	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+	int ret = 0;
 
 	/* Get the current policy */
 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
@@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
+	if (vcc_core && freqs.new > freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+	if (ret)
+		return ret;
 	/*
 	 * Tell everyone what we're about to do...
 	 * you should add a notify client with any platform specific
@@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 */
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
+	/*
+	 * Even if voltage setting fails, we don't report it, as the frequency
+	 * change succeeded. The voltage reduction is not a critical failure,
+	 * only power savings will suffer from this.
+	 *
+	 * Note: if the voltage change fails, and a return value is returned, a
+	 * bug is triggered (seems a deadlock). Should anybody find out where,
+	 * the "return 0" should become a "return ret".
+	 */
+	if (vcc_core && freqs.new < freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
 	return 0;
 }
 
@@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	if (cpu_is_pxa27x())
 		pxa27x_guess_max_freq();
 
+	pxa_cpufreq_init_voltages();
+
 	init_sdram_rows();
 
 	/* set default policy and cpuinfo */
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 2b289f83a61..7d3e1b46e55 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -16,15 +16,17 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/sm501.h>
+#include <linux/smsc911x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = {
 	{
 		.start	= CSB726_IRQ_LAN,
 		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
+struct smsc911x_platform_config csb726_lan_config = {
+	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+
 static struct platform_device csb726_lan = {
-	.name		= "smc911x",
+	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
 	.resource	= csb726_lan_resources,
+	.dev		= {
+		.platform_data	= &csb726_lan_config,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -303,6 +316,7 @@ static void __init csb726_init(void)
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
 	pxa_set_ohci_info(&csb726_ohci_platform_data);
+	pxa_set_ac97_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d245e59c51b..ecc08f360b6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,7 +8,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
@@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 }
 
 
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+	.gpio_pullup = -1,
+	.gpio_vbus   = -1,
+};
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
 {
@@ -287,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = {
 };
 
 struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
+	.name		= "pxa3xx-pwri2c",
 	.id		= 1,
 	.resource	= pxa3xx_resources_i2c_power,
 	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73fbd4c..243e0802b5f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <media/soc_camera.h>
 
@@ -41,7 +43,7 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
 
@@ -52,23 +54,31 @@
 #define GPIO13_MMC_CD		(13)
 #define GPIO95_MMC_WP		(95)
 #define GPIO56_NAND_RB		(56)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO16_USB_HUB_RESET	(16)
 
 /* eXeda specific GPIOs */
 #define GPIO114_MMC_CD		(114)
 #define GPIO20_NAND_RB		(20)
 #define GPIO38_SD_PWEN		(38)
+#define GPIO37_WLAN_RST		(37)
+#define GPIO95_TOUCHPAD_INT	(95)
+#define GPIO130_CAM_RESET	(130)
+#define GPIO10_USB_HUB_RESET	(10)
 
 /* common  GPIOs */
 #define GPIO11_NAND_CS		(11)
-#define GPIO93_CAM_RESET	(93)
 #define GPIO41_ETHIRQ		(41)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN	(115)
 #define GPIO19_WLAN_STRAP	(19)
+#define GPIO9_USB_VBUS_EN	(9)
 
 static int mmc_cd;
 static int nand_rb;
 static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
 
 static unsigned long common_pin_config[] = {
 	/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
-	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
 };
 
 static unsigned long em_x270_pin_config[] = {
-	GPIO13_GPIO,	/* MMC card detect */
-	GPIO56_GPIO,	/* NAND Ready/Busy */
-	GPIO95_GPIO,	/* MMC Write protect */
+	GPIO13_GPIO,				/* MMC card detect */
+	GPIO16_GPIO,				/* USB hub reset */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
+	GPIO95_GPIO,				/* MMC Write protect */
 };
 
 static unsigned long exeda_pin_config[] = {
+	GPIO10_GPIO,				/* USB hub reset */
 	GPIO20_GPIO,				/* NAND Ready/Busy */
 	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO95_GPIO,				/* touchpad IRQ */
 	GPIO114_GPIO,				/* MMC card detect */
 };
 
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
 
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+	int err;
+
+	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+	if (IS_ERR(em_x270_usb_ldo))
+		return PTR_ERR(em_x270_usb_ldo);
+
+	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+	if (err)
+		goto err_free_usb_ldo;
+
+	err = gpio_request(usb_hub_reset, "hub rst");
+	if (err)
+		goto err_free_vbus_gpio;
+
+	/* USB Hub power-on and reset */
+	gpio_direction_output(usb_hub_reset, 0);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+	gpio_set_value(usb_hub_reset, 0);
+	regulator_disable(em_x270_usb_ldo);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+
+	/* enable VBUS */
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+	return 0;
+
+err_free_vbus_gpio:
+	gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+	regulator_put(em_x270_usb_ldo);
+
+	return err;
+}
+
 static int em_x270_ohci_init(struct device *dev)
 {
+	int err;
+
+	/* we don't want to entirely disable USB if the HUB init failed */
+	err = em_x270_usb_hub_init();
+	if (err)
+		pr_err("USB Hub initialization failed: %d\n", err);
+
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
 	return 0;
 }
 
+static void em_x270_ohci_exit(struct device *dev)
+{
+	gpio_free(usb_hub_reset);
+	gpio_free(GPIO9_USB_VBUS_EN);
+
+	if (!IS_ERR(em_x270_usb_ldo)) {
+		if (regulator_is_enabled(em_x270_usb_ldo))
+			regulator_disable(em_x270_usb_ldo);
+
+		regulator_put(em_x270_usb_ldo);
+	}
+}
+
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
+	.exit		= em_x270_ohci_exit,
 };
 
 static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
 	if (err)
 		return err;
 
+	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		goto err_free_pwen;
+
+	if (machine_is_exeda()) {
+		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+		if (err)
+			goto err_free_strap;
+
+		gpio_direction_output(GPIO37_WLAN_RST, 1);
+		msleep(100);
+	}
+
 	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	mdelay(100);
+	msleep(100);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
 
 	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
-	mdelay(100);
+	msleep(100);
 	gpio_set_value(GPIO115_WLAN_PWEN, 1);
-	mdelay(100);
+	msleep(100);
 
 	spi->bits_per_word = 16;
 	spi_setup(spi);
 
 	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+	gpio_free(GPIO115_WLAN_PWEN);
+
+	return err;
 }
 
 static int em_x270_libertas_teardown(struct spi_device *spi)
 {
 	gpio_set_value(GPIO115_WLAN_PWEN, 0);
 	gpio_free(GPIO115_WLAN_PWEN);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	if (machine_is_exeda()) {
+		gpio_set_value(GPIO37_WLAN_RST, 0);
+		gpio_free(GPIO37_WLAN_RST);
+	}
 
 	return 0;
 }
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	ret = gpio_request(cam_reset, "camera reset");
 	if (ret)
 		return ret;
 
-	gpio_direction_output(GPIO93_CAM_RESET, 0);
+	gpio_direction_output(cam_reset, 0);
 
 	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
 	if (em_x270_camera_ldo == NULL) {
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return -ENODEV;
 	}
 
 	ret = regulator_enable(em_x270_camera_ldo);
 	if (ret) {
 		regulator_put(em_x270_camera_ldo);
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return ret;
 	}
 
-	gpio_set_value(GPIO93_CAM_RESET, 1);
+	gpio_set_value(cam_reset, 1);
 
 	return 0;
 }
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (on == is_on)
 		return 0;
 
-	gpio_set_value(GPIO93_CAM_RESET, !on);
+	gpio_set_value(cam_reset, !on);
 
 	if (on)
 		ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (ret)
 		return ret;
 
-	gpio_set_value(GPIO93_CAM_RESET, on);
+	gpio_set_value(cam_reset, on);
 
 	return 0;
 }
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	},
 };
 
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
-	.fast_mode = 1,
-};
-
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_i2c_info(&em_x270_i2c_info);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
 }
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
 };
 
 struct power_supply_info em_x270_psy_info = {
-	.name = "LP555597P6H-FPS",
+	.name = "battery",
 	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
 	.voltage_max_design = 4200000,
 	.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
 	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
 }
 
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+	.gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x21),
+		.platform_data = &exeda_gpio_ext_pdata,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+
+	if (machine_is_exeda())
+		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
 static void __init em_x270_module_init(void)
 {
 	pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
 	mmc_cd = GPIO13_MMC_CD;
 	nand_rb = GPIO56_NAND_RB;
 	dm9000_flags = DM9000_PLATF_32BITONLY;
+	cam_reset = GPIO93_CAM_RESET;
+	usb_hub_reset = GPIO16_USB_HUB_RESET;
 }
 
 static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
 	mmc_cd = GPIO114_MMC_CD;
 	nand_rb = GPIO20_NAND_RB;
 	dm9000_flags = DM9000_PLATF_16BITONLY;
+	cam_reset = GPIO130_CAM_RESET;
+	usb_hub_reset = GPIO10_USB_HUB_RESET;
 }
 
 static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	if (machine_is_em_x270())
 		em_x270_module_init();
 	else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
-	em_x270_init_camera();
 	em_x270_init_spi();
+	em_x270_init_i2c();
+	em_x270_init_camera();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 92ba16e1b6f..588b265e575 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -25,13 +26,19 @@
 #include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define GPIO12_A780_FLIP_LID 		12
+#define GPIO15_A1200_FLIP_LID 		15
+#define GPIO15_A910_FLIP_LID 		15
+#define GPIO12_E680_LOCK_SWITCH 	12
+#define GPIO15_E6_LOCK_SWITCH 		15
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
 	.max_brightness	= 1023,
@@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = {
 	.lcd_conn	= LCD_COLOR_TFT_18BPP,
 };
 
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata = {
 	&ezx_backlight_device,
 };
 
@@ -111,9 +118,9 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO,				/* pcap interrupt */
-	GPIO4_GPIO,				/* WDI_AP */
-	GPIO55_GPIO,				/* SYS_RESTART */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
+	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
+	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -144,20 +151,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO12_GPIO,
+	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO48_GPIO,				/* RESET */
 	GPIO28_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO57_GPIO,				/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
-	GPIO82_GPIO,				/* RESET */
-	GPIO99_GPIO,				/* TC_MM_EN */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
+	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
 
 	/* sound */
 	GPIO52_SSP3_SCLK,
@@ -199,21 +206,21 @@ static unsigned long gen1_pin_config[] __initdata = {
 	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO15_GPIO,
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* EOC */
-	GPIO10_GPIO,
+	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
 	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO37_GPIO,				/* RESET */
 	GPIO57_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO96_GPIO,				/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO116_GPIO,				/* RESET */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
 	GPIO41_GPIO,				/* BP_FLASH */
 
 	/* sound */
@@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 #endif /* CONFIG_MACH_EZX_E2 */
 
 #ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+	&a780_gpio_keys,
+};
+
 static void __init a780_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -663,7 +699,8 @@ static void __init a780_init(void)
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -678,10 +715,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO12_E680_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E680 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+	.buttons  = e680_buttons,
+	.nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e680_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e680_devices[] __initdata = {
+	&e680_gpio_keys,
+};
+
 static void __init e680_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -695,7 +761,8 @@ static void __init e680_init(void)
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
@@ -710,10 +777,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A1200_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A1200 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+	.buttons  = a1200_buttons,
+	.nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a1200_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *a1200_devices[] __initdata = {
+	&a1200_gpio_keys,
+};
+
 static void __init a1200_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -727,7 +823,8 @@ static void __init a1200_init(void)
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
@@ -742,6 +839,35 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A910_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A910 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+	.buttons  = a910_buttons,
+	.nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a910_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+	&a910_gpio_keys,
+};
+
 static void __init a910_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -754,7 +880,8 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
@@ -769,10 +896,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO15_E6_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E6 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+	.buttons  = e6_buttons,
+	.nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e6_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e6_devices[] __initdata = {
+	&e6_gpio_keys,
+};
+
 static void __init e6_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -786,7 +942,8 @@ static void __init e6_init(void)
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
@@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e2_devices[] __initdata = {
+};
+
 static void __init e2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -818,7 +978,8 @@ static void __init e2_init(void)
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 00000000000..7fff467e84f
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,851 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ *    Copyright (c) 2004 Hewlett-Packard Company.
+ *    Copyright (c) 2005 SDG Systems, LLC
+ *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/lcd.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/hx4700.h>
+#include <plat/i2c.h>
+#include <mach/irda.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS      PXA_CS3_PHYS
+#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,   /* W3220 */
+	GPIO79_nCS_3,   /* ASIC3 */
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* EGPIO, WLAN */
+
+	/* PC CARD */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO85_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* FFUART (RS-232) */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* PWM 1 (Backlight) */
+	GPIO17_PWM1_OUT,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* SSP 1 (NavPoint) */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP 2 (TSC2046) */
+	GPIO19_SSP2_SCLK,
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+	GPIO88_GPIO,
+
+	/* HX4700 specific input GPIOs */
+	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO13_GPIO,	/* W3220_IRQ */
+	GPIO14_GPIO,	/* nWLAN_IRQ */
+
+	GPIO10_GPIO,	/* GSM_IRQ */
+	GPIO13_GPIO,	/* CPLD_IRQ */
+	GPIO107_GPIO,	/* DS1WM_IRQ */
+	GPIO108_GPIO,	/* GSM_READY */
+	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
+	GPIO66_GPIO,	/* nSDIO_IRQ */
+};
+
+#define HX4700_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define HX4700_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			pr_err("Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+/*
+ * IRDA
+ */
+
+static void irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data ficp_info = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
+	{						\
+		.code       = KEY_##_code,		\
+		.gpio       = _gpio,			\
+		.active_low = _active_low,		\
+		.desc       = _desc,			\
+		.type       = EV_KEY,			\
+		.wakeup     = 1,			\
+	}
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
+	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
+	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
+	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
+	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+	.buttons = gpio_keys_buttons,
+	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+	.name = "gpio-keys",
+	.dev  = {
+		.platform_data = &gpio_keys_data,
+	},
+	.id   = -1,
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+	/* ASIC3 GPIO banks A and B along with some of C and D
+	   implement the buffering for the CF slot. */
+	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+	/* GPIOC - CF, LEDs, SD */
+	ASIC3_GPIOC0_LED0,		/* red */
+	ASIC3_GPIOC1_LED1,		/* green */
+	ASIC3_GPIOC2_LED2,		/* blue */
+	ASIC3_GPIOC4_CF_nCD,
+	ASIC3_GPIOC5_nCIOW,
+	ASIC3_GPIOC6_nCIOR,
+	ASIC3_GPIOC7_nPCE_1,
+	ASIC3_GPIOC8_nPCE_2,
+	ASIC3_GPIOC9_nPOE,
+	ASIC3_GPIOC10_nPWE,
+	ASIC3_GPIOC11_PSKTSEL,
+	ASIC3_GPIOC12_nPREG,
+	ASIC3_GPIOC13_nPWAIT,
+	ASIC3_GPIOC14_nPIOIS16,
+	ASIC3_GPIOC15_nPIOR,
+
+	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD11_nCIOIS16,
+	ASIC3_GPIOD12_nCWAIT,
+	ASIC3_GPIOD15_nPIOW,
+};
+
+static struct resource asic3_resources[] = {
+	/* GPIO part */
+	[0] = {
+		.start	= ASIC3_PHYS,
+		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* SD part */
+	[2] = {
+		.start	= ASIC3_SD_PHYS,
+		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+	.gpio_config     = asic3_gpio_config,
+	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+	.irq_base        = IRQ_BOARD_START,
+	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+};
+
+static struct platform_device asic3 = {
+	.name          = "asic3",
+	.id            = -1,
+	.resource      = asic3_resources,
+	.num_resources = ARRAY_SIZE(asic3_resources),
+	.dev = {
+		.platform_data = &asic3_platform_data,
+	},
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 0x4 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start = 0,
+		.gpio_base = HX4700_EGPIO_BASE,
+		.num_gpios = 8,
+		.direction = HTC_EGPIO_OUTPUT,
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width = 16,
+	.bus_width = 16,
+	.chip      = egpio_chips,
+	.num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+	.name          = "htc-egpio",
+	.id            = -1,
+	.resource      = egpio_resources,
+	.num_resources = ARRAY_SIZE(egpio_resources),
+	.dev = {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static int lcd_power;
+
+static void sony_lcd_init(void)
+{
+	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	mdelay(20);
+
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+	mdelay(5);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+	/* FIXME: init w3220 registers here */
+
+	mdelay(5);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
+{
+	switch (level) {
+	case FB_BLANK_UNBLANK:
+		sony_lcd_init();
+		break;
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_POWERDOWN:
+		sony_lcd_off();
+		break;
+	}
+	lcd_power = level;
+	return 0;
+}
+
+static int hx4700_lcd_get_power(struct lcd_device *lm)
+{
+	return lcd_power;
+}
+
+static struct lcd_ops hx4700_lcd_ops = {
+	.get_power = hx4700_lcd_get_power,
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct lcd_device *hx4700_lcd_device;
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+	sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+	sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume	NULL
+#define w3220_lcd_suspend	NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+	.suspend	= w3220_lcd_suspend,
+	.resume		= w3220_lcd_resume,
+};
+
+/*  				 W3220_VGA		QVGA */
+static struct w100_gen_regs w3220_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+	.xres 		= 480,
+	.yres 		= 640,
+	.left_margin 	= 15,
+	.right_margin 	= 16,
+	.upper_margin 	= 8,
+	.lower_margin 	= 7,
+	.crtc_ss	= 0x00000000,
+	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
+	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
+	.crtc_vpos_gs	= 0x0000028f,
+	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
+	.crtc_rev	= 0,
+	.crtc_dclk	= 0x80000000,
+	.crtc_gclk	= 0x040a0104,
+	.crtc_goe	= 0,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+{
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls        = 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+	.ext_mem_bw = 0x50413e01,
+	.offset = 0,
+	.ext_timing_ctl = 0x00043f7f,
+	.ext_cntl = 0x00000010,
+	.mode_reg = 0x00250000,
+	.io_cntl = 0x0fff0000,
+	.config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
+	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+	.tg        = &w3220_tg_info,
+	.mem       = &w3220_mem_info,
+	.bm_mem    = &w3220_bm_mem_info,
+	.gpio      = &w3220_gpio_info,
+	.regs      = &w3220_regs,
+	.modelist  = w3220_modes,
+	.num_modes = 2,
+	.xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+	[0] = {
+		.start	= ATI_W3220_PHYS,
+		.end	= ATI_W3220_PHYS + 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device w3220 = {
+	.name	= "w100fb",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &w3220_info,
+	},
+	.num_resources = ARRAY_SIZE(w3220_resources),
+	.resource      = w3220_resources,
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 1,
+	.max_brightness = 200,
+	.dft_brightness = 100,
+	.pwm_period_ns  = 30923,
+};
+
+static struct platform_device backlight = {
+	.name = "pwm-backlight",
+	.id   = -1,
+	.dev  = {
+		.parent        = &pxa27x_device_pwm1.dev,
+		.platform_data = &backlight_data,
+	},
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
+	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
+	.gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+	.name          = "gpio-vbus",
+	.id            = -1,
+	.dev = {
+		.platform_data = &gpio_vbus_info,
+	},
+};
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+	.model            = 7846,
+	.vref_delay_usecs = 100,
+	.pressure_max     = 512,
+	.debounce_max     = 10,
+	.debounce_tol     = 3,
+	.debounce_rep     = 1,
+	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+	.tx_threshold = 1,
+	.rx_threshold = 2,
+	.timeout      = 64,
+	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+	{
+		.modalias        = "ads7846",
+		.bus_num         = 2,
+		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
+		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+		.platform_data   = &tsc2046_info,
+		.controller_data = &tsc2046_chip,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+	.num_chipselect = 1,
+	.clock_enable   = CKEN_SSP2,
+	.enable_dma     = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+	return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+	"ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = hx4700_is_ac_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = hx4700_supplicants,
+	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD9_nAC_IN),
+		.end   = gpio_to_irq(GPIOD9_nAC_IN),
+	},
+	[1] = {
+		.name  = "usb",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+	},
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+	{
+		.dev = &gpio_vbus.dev,
+		.supply = "vbus_draw",
+	},
+	{
+		.dev = &power_supply.dev,
+		.supply = "ac_draw",
+	},
+};
+
+static struct regulator_init_data bq24022_init_data = {
+	.constraints = {
+		.max_uA         = 500000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies      = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+	.gpio_nce   = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+	.gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
+	.init_data  = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+	.name = "bq24022",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &bq24022_info,
+	},
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct map_info *map, int vpp)
+{
+	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_128M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 4,
+	.set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+	.name          = "physmap-flash",
+	.id            = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * PCMCIA
+ */
+
+static struct platform_device pcmcia = {
+	.name = "hx4700-pcmcia",
+	.dev  = {
+		.parent = &asic3.dev,
+	},
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&asic3,
+	&gpio_keys,
+	&backlight,
+	&w3220,
+	&egpio,
+	&bq24022,
+	&gpio_vbus,
+	&power_supply,
+	&strataflash,
+	&pcmcia,
+};
+
+static struct gpio_ress global_gpios[] = {
+	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
+	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
+	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
+	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"),
+	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"),
+	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"),
+	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"),
+	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
+	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
+	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"),
+	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"),
+	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"),
+	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"),
+};
+
+static void __init hx4700_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	pxa_set_ficp_info(&ficp_info);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
+					(void *)&w3220_info, &hx4700_lcd_ops);
+
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+	mdelay(10);
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+	.phys_io      = 0x40000000,
+	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params  = 0xa0000100,
+	.map_io       = pxa_map_io,
+	.init_irq     = pxa27x_init_irq,
+	.init_machine = hx4700_init,
+	.timer        = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2121309b247..961807dc646 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/udc.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+
 	/* Connector pins specified as gpios */
 	GPIO94_GPIO, /* large basic connector pin 14 */
 	GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO105_GPIO, /* blue led */
 };
 
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
 static struct gpio_led imote2_led_pins[] = {
 	{
 		.name       =  "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
 			.min_uV = 2800000,
 			.max_uV = 3000000,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+		.consumer_supplies = imote2_sensor_3_con,
 	},
 	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
 		.constraints = {
@@ -412,7 +439,7 @@ static struct platform_device imote2_flash_device = {
  */
 static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 	{ /* UCAM sensor board */
-		.type = "max1238",
+		.type = "max1239",
 		.addr = 0x35,
 	}, { /* ITS400 Sensor board only */
 		.type = "max1363",
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 		.type = "tmp175",
 		.addr = 0x4A,
 		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
 	},
 };
 
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
 	.num_chipselect = 1,
 };
 
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
-	gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
-	gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
 static struct pxa2xx_spi_chip staccel_chip_info = {
 	.tx_threshold = 8,
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi1control,
+	.gpio_cs = 24,
 };
 
 static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi3control,
+	.gpio_cs = 39,
 };
 
 static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
 static struct platform_device *imote2_devices[] = {
 	&imote2_flash_device,
 	&imote2_leds,
+	&sht15,
 };
 
 static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
-	gpio_direction_output(24, 0);
-	gpio_direction_output(39, 0);
 
 	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
 
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 00000000000..9eaeed1f87f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,131 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+
+#define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER			0
+#define GPIO12_HX4700_ASIC3_IRQ			12
+#define GPIO13_HX4700_W3220_IRQ			13
+#define GPIO14_HX4700_nWLAN_IRQ			14
+#define GPIO18_HX4700_RDY			18
+#define GPIO22_HX4700_LCD_RL			22
+#define GPIO27_HX4700_CODEC_ON			27
+#define GPIO32_HX4700_RS232_ON			32
+#define GPIO52_HX4700_CPU_nBATT_FAULT		52
+#define GPIO58_HX4700_TSC2046_nPENIRQ		58
+#define GPIO59_HX4700_LCD_PC1			59
+#define GPIO60_HX4700_CF_RNB			60
+#define GPIO61_HX4700_W3220_nRESET		61
+#define GPIO62_HX4700_LCD_nRESET		62
+#define GPIO63_HX4700_CPU_SS_nRESET		63
+#define GPIO65_HX4700_TSC2046_PEN_PU		65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
+#define GPIO67_HX4700_EUART_PS			67
+#define GPIO70_HX4700_LCD_SLIN1			70
+#define GPIO71_HX4700_ASIC3_nRESET		71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
+#define GPIO73_HX4700_LCD_UD_1			73
+#define GPIO75_HX4700_EARPHONE_nDET		75
+#define GPIO76_HX4700_USBC_PUEN			76
+#define GPIO81_HX4700_CPU_GP_nRESET		81
+#define GPIO82_HX4700_EUART_RESET		82
+#define GPIO83_HX4700_WLAN_nRESET		83
+#define GPIO84_HX4700_LCD_SQN			84
+#define GPIO85_HX4700_nPCE1			85
+#define GPIO88_HX4700_TSC2046_CS		88
+#define GPIO91_HX4700_FLASH_VPEN		91
+#define GPIO92_HX4700_HP_DRIVER			92
+#define GPIO93_HX4700_EUART_INT			93
+#define GPIO94_HX4700_KEY_MAIL			94
+#define GPIO95_HX4700_BATT_OFF			95
+#define GPIO96_HX4700_BQ24022_ISET2		96
+#define GPIO97_HX4700_nBL_DETECT		97
+#define GPIO99_HX4700_KEY_CONTACTS		99
+#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
+#define GPIO103_HX4700_SYNAPTICS_INT		103
+#define GPIO105_HX4700_nIR_ON			105
+#define GPIO106_HX4700_CPU_BT_nRESET		106
+#define GPIO107_HX4700_SPK_nSD			107
+#define GPIO109_HX4700_CODEC_nPDN		109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
+#define GPIO114_HX4700_CF_RESET			114
+#define GPIO116_HX4700_CPU_HW_nRESET		116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
+#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
+#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
+#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
+#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
+#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
+#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
+#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
+#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
+#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
+#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
+#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
+#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
+#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
+#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
+#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
+#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
+#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
+#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
+#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
+#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
+#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
+#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
+#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32bb4a2eb7f..6a1d9599334 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,13 +91,23 @@
 #define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
 
 /*
- * The next 16 interrupts are for board specific purposes.  Since
+ * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
+ * these.  There will be 16 IRQs by default.  If it is not enough,
+ * IRQ_BOARD_END is allowed be customized for each board, but keep
+ * the numbers within sensible limits and in descending order, so
+ * when multiple config options are selected, the maximum will be
+ * used.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+
+#if defined(CONFIG_MACH_H4700)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+#endif
 
 #define IRQ_SA1111_START	(IRQ_BOARD_END)
 #define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
@@ -188,8 +198,6 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS			(IRQ_BOARD_START + 32)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 07897e61d05..3ce4682eabb 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -283,6 +283,9 @@
 #define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
 #define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
 #define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
 #define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
 #define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
 #define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
@@ -291,6 +294,9 @@
 #define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
 #define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
 #define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
 #define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
 #define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
 #define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
@@ -299,13 +305,18 @@
 #define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
 #define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
 #define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
 #define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
 #define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
 #define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
 #define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
 #define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
 #define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
 #define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
 #define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
 
 /* UART2 */
@@ -438,6 +449,9 @@
 
 #define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
 #define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
 
 #define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
 #define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index fb13c82ad6d..8721b801022 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -56,7 +56,6 @@
 #define GPIO_NR_PALMLD_LED_AMBER	94
 
 /* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ		95
 #define GPIO_NR_PALMLD_IDE_RESET	98
 #define GPIO_NR_PALMLD_IDE_PWEN		115
 
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index a6eeef8a075..fd8360c6839 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int);
 extern void pxa_cpu_resume(void);
 
 extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
 
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 6876e16c297..0b702693f45 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -16,4 +16,7 @@
 #define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+extern int __init pxa27x_set_pwrmode(unsigned int mode);
+
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 31e6a7b6ad8..b6c10556fbc 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
 /**
  * init_gpio_reset() - register GPIO as reset generator
  * @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
  */
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
 
 #endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 2d00db22b98..1920dc6b05d 100644
--- a/arch/arm/include/asm/hardware/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-
-#include <linux/interrupt.h>
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
 
 struct sharpsl_charger_machinfo {
 	void (*init)(void);
@@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm;
 
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
 
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5706cea95d1..b54749413e9 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -36,7 +36,8 @@ static inline void flush(void)
 static inline void arch_decomp_setup(void)
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
-			|| machine_is_csb726())
+	    || machine_is_csb726() || machine_is_stargate2()
+	    || machine_is_cm_x300())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9feb4d..55b3788fd1a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
 
 #include "generic.h"
 
+#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
+
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
@@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO123_KP_MKOUT_2,
 	GPIO124_KP_MKOUT_3,
 	GPIO125_KP_MKOUT_4,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+	GPIO15_GPIO, /* card detect */
 };
 
 static struct resource smc91x_resources[] = {
@@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
 	.num_chipselect		= 1,
 };
 
-static void littleton_tdo24m_cs(u32 cmd)
-{
-	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
-	.cs_control	= littleton_tdo24m_cs,
+	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 
 static void __init littleton_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
-	if (err) {
-		pr_warning("failed to request GPIO for LCS CS\n");
-		return;
-	}
-
-	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
@@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int littleton_mci_init(struct device *dev,
+			      irq_handler_t littleton_detect_int, void *data)
+{
+	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	err = gpio_request(gpio_cd, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+
+	gpio_direction_input(gpio_cd);
+
+	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "mmc card detect", data);
+	if (err) {
+		dev_err(dev, "failed to request card detect IRQ\n");
+		goto err_request_irq;
+	}
+	return 0;
+
+err_request_irq:
+	gpio_free(gpio_cd);
+err_request_cd:
+	return err;
+}
+
+static void littleton_mci_exit(struct device *dev, void *data)
+{
+	int gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	free_irq(gpio_to_irq(gpio_cd), data);
+	gpio_free(gpio_cd);
+}
+
+static struct pxamci_platform_data littleton_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 		= littleton_mci_init,
+	.exit		= littleton_mci_exit,
+};
+
+static void __init littleton_init_mmc(void)
+{
+	pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
@@ -407,6 +454,7 @@ static void __init littleton_init(void)
 
 	littleton_init_spi();
 	littleton_init_i2c();
+	littleton_init_mmc();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c899bbd94dc..ca39669cffc 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -36,7 +36,7 @@
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
@@ -745,6 +745,14 @@ static struct platform_device strataflash = {
 };
 
 /*
+ * I2C
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+	.fast_mode = 1,
+};
+
+/*
  * Platform devices
  */
 
@@ -771,7 +779,7 @@ static void __init magician_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
 	if (!err) {
@@ -779,7 +787,7 @@ static void __init magician_init(void)
 		pxa_set_ficp_info(&magician_ficp_info);
 	}
 	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
+	pxa_set_i2c_info(&i2c_info);
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a6c8429e975..f4dabf0273c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,7 +46,7 @@
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 7ffb91d64c3..cf6b720c055 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
@@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_pgsr[i] = PGSR(i);
 
 		GPDR(i * 32) = gpdr_lpm[i];
 	}
@@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
 		GPDR(i * 32) = saved_gpdr[i];
+		PGSR(i) = saved_pgsr[i];
 	}
 	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
@@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
 	if (cpu_is_pxa27x())
 		pxa27x_mfp_init();
 
+	/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+	PSSR = PSSR_RDH;
+
 	/* initialize gafr_run[], pgsr_lpm[] from existing values */
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
 		gpdr_lpm[i] = GPDR(i * 32);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index ff8052ce0a0..4dc8c2ec40a 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -48,7 +48,7 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <media/soc_camera.h>
@@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd)
 	arm_machine_restart('s', cmd);
 }
 
-struct gpio_ress global_gpios[] = {
+static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
 	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1cec1806f00..ed70f281dd0 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO108_GPIO,	/* ir disable */
@@ -127,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO81_GPIO,	/* wifi reset */
 
 	/* HDD */
-	GPIO95_GPIO,	/* HDD irq */
+	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
 
 	/* MISC */
@@ -494,6 +496,14 @@ static struct platform_device palmld_asoc = {
 };
 
 /******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+	.name	= "pata_palmld",
+	.id	= -1,
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmld_lcd_modes[] = {
@@ -522,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmld_pm_init(void)
+static void __init palmld_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMLD_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmld_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -557,6 +555,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_leds,
 	&power_supply,
 	&palmld_asoc,
+	&palmld_hdd,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -584,6 +583,7 @@ static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
 	pxa_set_ac97_info(&palmld_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 30662363907..aae64a12a73 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -64,6 +65,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */
@@ -342,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmt5_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmt5_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmt5_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -465,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmt5_pm_init(void)
+static void __init palmt5_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMT5_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmt5_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -499,6 +496,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmt5_backlight,
 	&power_supply,
 	&palmt5_asoc,
+	&palmt5_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -514,14 +512,15 @@ static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
 	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_udc_info(&palmt5_udc_info);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 43fcf2e8688..d823b09801d 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/mfp-pxa25x.h>
 #include <mach/irda.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
 	GPIO1_RST,	/* reset */
 	GPIO4_GPIO,	/* Hotsync button */
 	GPIO9_GPIO,	/* power detect */
+	GPIO15_GPIO,	/* earphone detect */
 	GPIO37_GPIO,	/* LCD power */
 	GPIO56_GPIO,	/* Backlight power */
 };
@@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmte2_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmte2_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 };
 
 /******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmte2_asoc_pdata,
+	},
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmte2_lcd_modes[] = {
@@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmte2_backlight,
 	&power_supply,
+	&palmte2_asoc,
+	&palmte2_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -447,7 +474,6 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_udc_info(&palmte2_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e2d44b1a8a9..6c15d84bde5 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -65,6 +66,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */
@@ -358,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmtx_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmtx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtx_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -482,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmtx_pm_init(void)
+static void __init palmtx_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMTX_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmtx_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -516,6 +513,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmtx_backlight,
 	&power_supply,
 	&palmtx_asoc,
+	&palmtx_gpio_vbus,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -547,11 +545,11 @@ static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
 	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6c12b5a3132..095521e9ee2 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,7 +28,7 @@
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 884b174c8ea..7693355ee63 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
-static int pxa_pm_prepare(void)
+int pxa_pm_prepare(void)
 {
 	int ret = 0;
 
@@ -89,7 +89,7 @@ static int pxa_pm_prepare(void)
 	return ret;
 }
 
-static void pxa_pm_finish(void)
+void pxa_pm_finish(void)
 {
 	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
 		pxa_cpu_pm_fns->finish();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 036bbde4d22..ac431ed1039 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -39,7 +39,7 @@
 #include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
@@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = {
 	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static void ads7846_cs(u32 command)
-{
-	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.cs_control		= ads7846_cs,
+	.gpio_cs		= POODLE_GPIO_TP_CS,
 };
 
 static struct spi_board_info poodle_spi_devices[] = {
@@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = {
 
 static void __init poodle_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
-
 	pxa2xx_set_spi_info(1, &poodle_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a425ec71e65..ec68cc16b4e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,7 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = {
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
 /*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int __init pxa27x_set_pwrmode(unsigned int mode)
+{
+	switch (mode) {
+	case PWRMODE_SLEEP:
+	case PWRMODE_DEEPSLEEP:
+		pwrmode = mode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
@@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(PWRMODE_SLEEP);
+		pxa27x_cpu_suspend(pwrmode);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b02d4544dc9..6f678d93bf4 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct platform_device *devices[] __initdata = {
-/*	&pxa_device_udc,	The UDC driver is PXA25x only */
+	&pxa27x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index df29d45fb4e..01e9d643394 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
 {
 	int rc;
 
@@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
 	}
 
 	if (output)
-		rc = gpio_direction_output(gpio, 0);
+		rc = gpio_direction_output(gpio, level);
 	else
 		rc = gpio_direction_input(gpio);
 	if (rc) {
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ff823999143..8241a63ea58 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -27,7 +27,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa930.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 047909a7665..55259f4756c 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -7,7 +7,7 @@
  *
  */
 
-#include <asm/hardware/sharpsl_pm.h>
+#include <mach/sharpsl_pm.h>
 
 /*
  * SharpSL SSP Driver
@@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode);
 
 extern struct battery_thresh spitz_battery_levels_acin[];
 extern struct battery_thresh spitz_battery_levels_noac[];
-void sharpsl_pm_pxa_init(void);
-void sharpsl_pm_pxa_remove(void);
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 16b4ec67e3b..2546c066cd6 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,20 +15,69 @@
 #undef DEBUG
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
+#include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
+
 #include "sharpsl.h"
 
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
 struct battery_thresh spitz_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
@@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 #endif
 }
 
-void sharpsl_pm_pxa_init(void)
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_delayed_work(&toggle_charger, 0);
+
+	while(1) {
+		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+#ifdef CONFIG_BACKLIGHT_CORGI
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			sharpsl_pm.machinfo->backlight_limit(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		sharpsl_pm.machinfo->backlight_limit(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+#endif
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_err(sharpsl_pm.dev, "Charging Error!\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+	}
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_OFF);
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
 {
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	sharpsl_pm_led(SHARPSL_LED_ON);
+	sharpsl_pm.machinfo->charge(0);
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	sharpsl_pm.machinfo->charge(1);
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+   delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+	int is_fatal = 0;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		sharpsl_pm.machinfo->measure_temp(1);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+		sharpsl_pm.machinfo->measure_temp(0);
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > sharpsl_pm.machinfo->charge_on_temp) {
+		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+	int val, i, buff[5];
+
+	/* disable charge, enable discharge */
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.machinfo->discharge(1);
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	sharpsl_pm.machinfo->discharge(0);
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < sharpsl_pm.machinfo->charge_on_volt)
+		return -1;
+
+	return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	if (sharpsl_pm.machinfo->earlyresume)
+		sharpsl_pm.machinfo->earlyresume();
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		sharpsl_pm.machinfo->charge(0);
+		udelay(100);
+		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.machinfo->discharge(0);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		sharpsl_pm_led(SHARPSL_LED_ON);
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+			return sharpsl_off_charge_error();
+
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occurred */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+				sharpsl_pm.full_count++;
+				sharpsl_pm.machinfo->charge(0);
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				sharpsl_pm.machinfo->charge(1);
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occurred */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+#else
+#define sharpsl_pm_suspend	NULL
+#define sharpsl_pm_resume	NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static struct platform_suspend_ops sharpsl_pm_ops = {
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
+	.enter		= corgi_pxa_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+#endif
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = &pdev->dev;
+	sharpsl_pm.machinfo = pdev->dev.platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+	sharpsl_pm.machinfo->init();
+
+	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
 	/* Register interrupt handlers */
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 	{
 		/* Register interrupt handler. */
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+	if (ret != 0)
+		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+	suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
 }
 
-void sharpsl_pm_pxa_remove(void)
+static int sharpsl_pm_remove(struct platform_device *pdev)
 {
+	suspend_set_ops(NULL);
+
+	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
@@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void)
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+	if (sharpsl_pm.machinfo->exit)
+		sharpsl_pm.machinfo->exit();
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
 }
+
+static struct platform_driver sharpsl_pm_driver = {
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+	.driver		= {
+		.name		= "sharpsl-pm",
+	},
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+	platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c18e34acafc..dda310fe71c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
 #include <linux/mtd/sharpsl.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
 
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
-static void spitz_ads7846_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.cs_control		= spitz_ads7846_cs,
+	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
 static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static void spitz_lcdcon_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.cs_control	= spitz_lcdcon_cs,
+	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
 };
 
-static void spitz_max1111_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.cs_control	= spitz_max1111_cs,
+	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 
 static void __init spitz_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
-	if (err)
-		goto err_free_3;
-
 	if (machine_is_akita()) {
 		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-	return;
-
-err_free_3:
-	gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
-	gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(SPITZ_GPIO_ADS7846_CS);
 }
 #else
 static inline void spitz_init_spi(void) {}
@@ -531,9 +467,15 @@ static int spitz_ohci_init(struct device *dev)
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
+static void spitz_ohci_exit(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.exit		= spitz_ohci_exit,
 	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
@@ -731,7 +673,7 @@ static void spitz_restart(char mode, const char *cmd)
 
 static void __init common_init(void)
 {
-	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 2e4490562c9..724ffb03031 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -41,7 +41,6 @@ static void spitz_charger_init(void)
 {
 	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
 	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void spitz_measure_temp(int on)
@@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type)
 
 struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.init             = spitz_charger_init,
-	.exit             = sharpsl_pm_pxa_remove,
+	.exit             = NULL,
 	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
 	.gpio_acin        = SPITZ_GPIO_AC_IN,
 	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 00000000000..3b205b69f3f
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,796 @@
+/*
+ *  linux/arch/arm/mach-pxa/stargate2.c
+ *
+ *  Author:	Ed C. Epp
+ *  Created:	Nov 05, 2002
+ *  Copyright:	Intel Corp.
+ *
+ *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET		81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT	90
+#define SG2_SD_POWER_ENABLE	89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+	/* Device Identification for wakeup*/
+	GPIO102_GPIO,
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* DA9030 */
+	GPIO1_GPIO,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
+
+	/* cc2420 802.15.4 radio */
+	GPIO22_GPIO,		/* CC_RSTN  (out)*/
+	GPIO114_GPIO,		/* CC_FIFO (in) */
+	GPIO116_GPIO, 		/* CC_CCA (in) */
+	GPIO0_GPIO,		/* CC_FIFOP (in) */
+	GPIO16_GPIO,		/* CCSFD (in) */
+	GPIO39_GPIO,		/* CSn (out) */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP 3 - 802.15.4 radio */
+	GPIO39_GPIO, /* chip select */
+	GPIO34_SSP3_SCLK,
+	GPIO35_SSP3_TXD,
+	GPIO41_SSP3_RXD,
+
+	/* SSP 2 */
+	GPIO11_SSP2_RXD,
+	GPIO38_SSP2_TXD,
+	GPIO36_SSP2_SCLK,
+	GPIO37_GPIO, /* chip select */
+
+	/* SSP 1 */
+	GPIO26_SSP1_RXD,
+	GPIO25_SSP1_TXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_GPIO, /* chip select */
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
+
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
+
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
+enum stargate2_ldos{
+	vcc_vref,
+	vcc_cc2420,
+	/* a mote connector? */
+	vcc_mica,
+	/* the CSR bluecore chip */
+	vcc_bt,
+	/* The two voltages available to sensor boards */
+	vcc_sensor_1_8,
+	vcc_sensor_3,
+	/* directly connected to the pxa27x */
+	vcc_sram_ext,
+	vcc_pxa_pll,
+	vcc_pxa_usim, /* Reference voltage for certain gpios */
+	vcc_pxa_mem,
+	vcc_pxa_flash,
+	vcc_pxa_core, /*Dc-Dc buck not yet supported */
+	vcc_lcd,
+	vcc_bb,
+	vcc_bbio, /*not sure!*/
+	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo.  Unfortunately this information is
+ * not generally available.  More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+	[vcc_bbio] = {
+		.constraints = { /* board default 1.8V */
+			.name = "vcc_bbio",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_bb] = {
+		.constraints = { /* board default 2.8V */
+			.name = "vcc_bb",
+			.min_uV = 2700000,
+			.max_uV = 3000000,
+		},
+	},
+	[vcc_pxa_flash] = {
+		.constraints = {/* default is 1.8V */
+			.name = "vcc_pxa_flash",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_cc2420] = { /* also vcc_io */
+		.constraints = {
+			/* board default is 2.8V */
+			.name = "vcc_cc2420",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_vref] = { /* Reference for what? */
+		.constraints = { /* default 1.8V */
+			.name = "vcc_vref",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sram_ext] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_sram_ext",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_mica] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_mica",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_bt] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_bt",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_lcd] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_lcd",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_io] = { /* Same or higher than everything
+			  * bar vccbat and vccusb */
+		.constraints = { /* default 2.8V */
+			.name = "vcc_io",
+			.min_uV = 2692000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_sensor_1_8] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_sensor_1_8",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sensor_3] = { /* curiously default 2.8V */
+		.constraints = {
+			.name = "vcc_sensor_3",
+			.min_uV = 2800000,
+			.max_uV = 3000000,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+		.consumer_supplies = stargate2_sensor_3_con,
+	},
+	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+		.constraints = {
+			.name = "vcc_pxa_pll",
+			.min_uV = 1170000,
+			.max_uV = 1430000,
+		},
+	},
+	[vcc_pxa_usim] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_usim",
+			.min_uV = 1710000,
+			.max_uV = 2160000,
+		},
+	},
+	[vcc_pxa_mem] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_mem",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name = "smc91x-regs",
+		.start = (PXA_CS4_PHYS + 0x300),
+		.end = (PXA_CS4_PHYS + 0xfffff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_GPIO(40),
+		.end = IRQ_GPIO(40),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+	| SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev = {
+		.platform_data = &stargate2_smc91x_info,
+	},
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+			      irq_handler_t stargate2_detect_int,
+			      void *data)
+{
+	int err;
+
+	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+	if (err) {
+		printk(KERN_ERR "Can't get the gpio for SD power control");
+		goto return_err;
+	}
+	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+	if (err) {
+		printk(KERN_ERR "Can't get the sd detect gpio");
+		goto free_power_en;
+	}
+	gpio_direction_input(SG2_GPIO_nSD_DETECT);
+	/* Delay to allow for full insertion */
+	stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+			  stargate2_detect_int,
+			  IRQ_TYPE_EDGE_BOTH,
+			  "MMC card detect",
+			  data);
+	if (err) {
+		printk(KERN_ERR "can't request MMC card detect IRQ\n");
+		goto free_nsd_detect;
+	}
+	return 0;
+
+ free_nsd_detect:
+	gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+	gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+	return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+	gpio_free(SG2_SD_POWER_ENABLE);
+	gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init = stargate2_mci_init,
+	.setpower = stargate2_mci_setpower,
+	.exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+	{
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
+	}, {
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
+	}, {
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+	.start = PXA_CS1_PHYS,
+	.end = PXA_CS1_PHYS + SZ_32M-1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+	.mapname = "Stargate2 SRAM",
+	.bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+	.name = "mtd-ram",
+	.id = 0,
+	.resource = &sram_resources,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &stargate2_sram_pdata,
+	},
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+	.gpio_base = 128,
+	.n_latch = 0,
+	.setup = NULL,
+	.teardown = NULL,
+	.context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+	.byte_len = 256,
+	.page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+	/* Techically this a pca9500 - but it's compatible with the 8574
+	 * for gpio expansion and the 24c02 for eeprom access.
+	 */
+	{
+		.type = "pcf8574",
+		.addr =  0x27,
+		.platform_data = &platform_data_pcf857x,
+	}, {
+		.type = "24c02",
+		.addr = 0x57,
+		.platform_data = &pca9500_eeprom_pdata,
+	}, {
+		.type = "max1238",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	},
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
+	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+	.udc_is_connected	= sg2_udc_detect,
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+	&stargate2_flash_device,
+	&stargate2_sram,
+	&smc91x_device,
+	&sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+	/* This is probably a board specific hack as this must be set
+	   prior to connecting the MFP stuff up. */
+	MECR &= ~MECR_NOS;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+	/* spi chip selects */
+	gpio_direction_output(37, 0);
+	gpio_direction_output(24, 0);
+	gpio_direction_output(39, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+	i2c_register_board_info(1,
+				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+
+	pxa_set_mci_info(&stargate2_mci_platform_data);
+
+	pxa_set_udc_info(&stargate2_udc_info);
+
+	stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa27x_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = stargate2_init,
+	.boot_params = 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index afac5b6d3d7..168267a5dfb 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -40,7 +40,7 @@
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
@@ -897,7 +897,7 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f79c9cb70ae..825f540176d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,7 +47,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 0e65344e9f5..d33c232b686 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -45,7 +45,8 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+#include <mach/regs-uart.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c256c57642c..cefd1c0a854 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec1062777..d4cfa214538 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB tile"
 	depends on REALVIEW_EB_ARM11MP
-	default n
 	help
 	  Enable support for the ARM11MPCore RevB tile on the Realview
 	  platform. Since there are device address differences, a
@@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176
 	help
 	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
 
+config REALVIEW_PB1176_SECURE_FLASH
+	bool "Allow access to the secure flash memory block"
+	depends on MACH_REALVIEW_PB1176
+	default n
+	help
+	  Select this option if Linux will only run in secure mode on the
+	  RealView PB1176 platform and access to the secure flash memory
+	  block (64MB @ 0x3c000000) is required.
+
 config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
@@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
 	  PCI-E and Compact Flash.
 
+config MACH_REALVIEW_PBX
+	bool "Support RealView/PBX platform"
+	select ARM_GIC
+	select HAVE_PATA_PLATFORM
+	help
+	  Include support for the ARM(R) RealView PBX platform.
+
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
 	depends on !MACH_REALVIEW_PB1176
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ffc4b5..e704edb733c 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 942e1a7eb9b..9ea9c05093c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
 #include "core.h"
 #include "clock.h"
 
@@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt)
 {
 	unsigned long flags;
 	u32 val;
+	u32 led = 1 << smp_processor_id();
 
 	local_irq_save(flags);
 	val = readl(VA_LEDS_BASE);
 
 	switch (ledevt) {
 	case led_idle_start:
-		val = val & ~REALVIEW_SYS_LED0;
+		val = val & ~led;
 		break;
 
 	case led_idle_end:
-		val = val | REALVIEW_SYS_LED0;
+		val = val | led;
 		break;
 
 	case led_timer:
-		val = val ^ REALVIEW_SYS_LED1;
+		val = val ^ REALVIEW_SYS_LED7;
 		break;
 
 	case led_halted:
@@ -750,14 +754,6 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	/*
-	 * The dummy clock device has to be registered before the main device
-	 * so that the latter will broadcast the clock events
-	 */
-	local_timer_setup();
-#endif
-
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c08637683..59a337ba4be 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d7701fa9..794a8d91a6a 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 858eea7b1ad..98f8e7eeacc 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -32,6 +32,8 @@
 #define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
 #define REALVIEW_PB1176_FLASH_BASE		0x30000000
 #define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
 
 #define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
 #define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
@@ -71,82 +73,4 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7a126..f0d68e0fea0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b16e5..4dfc67a4f45 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START			32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
new file mode 100644
index 00000000000..848bfff6d8f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
+#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
+#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
+#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
+#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
+#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE		0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE		0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
+#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK          0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
+#define REALVIEW_PBX_PROC_ARM9          0x02000000
+#define REALVIEW_PBX_PROC_ARM11         0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
+#define REALVIEW_PBX_PROC_A9MP          0x0C000000
+#define REALVIEW_PBX_PROC_A8            0x0E000000
+
+#define check_pbx_proc(proc_type)                                            \
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+	== proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp()     0
+#define core_tile_pbxa9mp()     0
+#define core_tile_pbxa8()       0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 92dbcb9e179..932d8af1806 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -12,7 +12,8 @@
 
 #if defined(CONFIG_MACH_REALVIEW_EB) || \
     defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8)
+    defined(CONFIG_MACH_REALVIEW_PBA8) || \
+    defined(CONFIG_MACH_REALVIEW_PBX)
 #ifndef DEBUG_LL_UART_OFFSET
 #define DEBUG_LL_UART_OFFSET	0x00009000
 #elif DEBUG_LL_UART_OFFSET != 0x00009000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 00000000000..204d5378f30
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 00000000000..2410d4f8ddd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 00000000000..34e255add21
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 00000000000..86792a9f2ab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 00000000000..deaad4302b1
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START			32
+
+/* L220
+#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
+#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
+#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC		-1
+#define IRQ_PBX_SCTL		-1
+
+#define NR_GIC_PBX		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBX
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBX */
+
+#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index fe5cb987aa2..78854f2fa32 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,10 +22,11 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d645a..00000000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index 515819efd04..dd53892d44a 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -15,16 +15,9 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(cpumask_t callmap)
-{
-	gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
 {
+	gic_raise_softirq(mask, 1);
 }
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 415d634d52a..83050378ffd 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -24,6 +24,7 @@
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
 #include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
@@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void)
 		return REALVIEW_PB1176_UART0_BASE;
 	else if (machine_is_realview_pba8())
 		return REALVIEW_PBA8_UART0_BASE;
+	else if (machine_is_realview_pbx())
+		return REALVIEW_PBX_UART0_BASE;
 	else
 		return 0;
 }
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index d0d39adf640..60b4e111f45 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,194 +9,18 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
 
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
-	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
-	clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
-				      struct clock_event_device *unused)
-{
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
-	return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
-	unsigned long load, count;
-	u64 waitjiffies;
-
-	/*
-	 * If this is the first time round, we need to work out how fast
-	 * the timer ticks
-	 */
-	if (mpcore_timer_rate == 0) {
-		printk("Calibrating local timer... ");
-
-		/* Wait for a tick to start */
-		waitjiffies = get_jiffies_64() + 1;
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		/* OK, now the tick has started, let's get the timer going */
-		waitjiffies += 5;
-
-				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
-				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
-		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
-		printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
-			(mpcore_timer_rate / 100000) % 100);
-	}
-
-	load = mpcore_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
 
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-	unsigned long flags;
-
-	twd_calibrate_rate();
-
-	clk->name		= "local_timer";
-	clk->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	clk->rating		= 350;
-	clk->set_mode		= local_timer_set_mode;
-	clk->set_next_event	= local_timer_set_next_event;
-	clk->irq		= IRQ_LOCALTIMER;
-	clk->cpumask		= cpumask_of(cpu);
-	clk->shift		= 20;
-	clk->mult		= div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns	= clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns	= clockevent_delta2ns(0xf, clk);
-
-	/* Make sure our local interrupt controller has this enabled */
-	local_irq_save(flags);
-	get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
-	local_irq_restore(flags);
-
-	clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
 }
-
-#else	/* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
-	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
-	clk->mult               = 1;
-	clk->set_mode		= dummy_timer_set_mode;
-	clk->broadcast		= smp_timer_broadcast;
-	clk->cpumask		= cpumask_of(cpu);
-
-	clockevents_register_device(clk);
-}
-
-#endif	/* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ea3c75595fa..ac0e83f1cc3 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,12 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
+#include <asm/localtimer.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
 
 #include "core.h"
 
@@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void)
 		return __io_address(REALVIEW_EB11MP_SCU_BASE);
 	else if (machine_is_realview_pb11mp())
 		return __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else if (machine_is_realview_pbx() &&
+		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
 	else
 		return (void __iomem *)0;
 }
 
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
 {
-	unsigned int ncores;
 	void __iomem *scu_base = scu_base_addr();
-
-	if (scu_base) {
-		ncores = __raw_readl(scu_base + SCU_CONFIG);
-		ncores = (ncores & 0x03) + 1;
-	} else
-		ncores = 1;
-
-	return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
-	u32 scu_ctrl;
-	void __iomem *scu_base = scu_base_addr();
-
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -78,13 +64,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	trace_hardirqs_off();
 
 	/*
-	 * the primary core may have used a "cross call" soft interrupt
-	 * to get this processor out of WFI in the BootMonitor - make
-	 * sure that we are no longer being sent this soft interrupt
-	 */
-	smp_cross_call_done(cpumask_of_cpu(cpu));
-
-	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
@@ -136,7 +115,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Use smp_cross_call() for this, since there's little
 	 * point duplicating the code here
 	 */
-	smp_cross_call(cpumask_of_cpu(cpu));
+	smp_cross_call(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -191,7 +170,7 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -224,21 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#ifdef CONFIG_LOCAL_TIMERS
-	/*
-	 * Enable the local timer for primary CPU. If the device is
-	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
-	 * realview_timer_init
-	 */
-	local_timer_setup();
-#endif
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
 	for (i = 0; i < max_cpus; i++)
-		cpu_set(i, cpu_present_map);
+		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU if there are more than one CPU and let
@@ -248,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * WFI
 	 */
 	if (max_cpus > 1) {
-		scu_enable();
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
 		poke_milo();
 	}
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef122b..8dfa44e08a9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a64b84a7a3d..25efe71a67c 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = {
 /*
  * RealView PB1176 platform devices
  */
-static struct resource realview_pb1176_flash_resource = {
-	.start			= REALVIEW_PB1176_FLASH_BASE,
-	.end			= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_FLASH_BASE,
+		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
+		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
 };
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS	2
+#else
+#define PB1176_FLASH_BLOCKS	1
+#endif
 
 static struct resource realview_pb1176_smsc911x_resources[] = {
 	[0] = {
@@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void)
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
-	realview_flash_register(&realview_pb1176_flash_resource, 1);
+	realview_flash_register(realview_pb1176_flash_resources,
+				PB1176_FLASH_BLOCKS);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60eca35..dc4b1694390 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
new file mode 100644
index 00000000000..1fe294d0bf9
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -0,0 +1,335 @@
+/*
+ *  arch/arm/mach-realview/realview_pbx.c
+ *
+ *  Copyright (C) 2009 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_PCI
+	{
+		.virtual	= PCIX_UNIT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
+		.type		= MT_DEVICE,
+	},
+#endif
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+	{
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+		.length         = SZ_8K,
+		.type           = MT_DEVICE,
+	}
+};
+
+static void __init realview_pbx_map_io(void)
+{
+	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA	{ 0, 0 }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA		{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA		{ 15, 14 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA		{ 13, 12 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA		{ 11, 10 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA		{ 0x86, 0x87 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+	[0] = {
+		.start          = REALVIEW_PBX_FLASH0_BASE,
+		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = REALVIEW_PBX_FLASH1_BASE,
+		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_ETH_BASE,
+		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_ETH,
+		.end		= IRQ_PBX_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_USB_BASE,
+		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_USB,
+		.end		= IRQ_PBX_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM PBX on-board GIC */
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+			      29);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+	} else {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+			      IRQ_PBX_GIC_START);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+	}
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+	realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+	.init		= realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	if (core_tile_pbxa9mp()) {
+		void __iomem *l2x0_base =
+			__io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+		/* set RAM latencies to 1 cycle for eASIC */
+		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+		/* 16KB way size, 8-way associativity, parity disabled
+		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+	}
+#endif
+
+	realview_flash_register(realview_pbx_flash_resources,
+				ARRAY_SIZE(realview_pbx_flash_resources));
+	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pbx_isp1761_resources);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= realview_pbx_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pbx_timer,
+	.init_machine	= realview_pbx_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed4174c8..6c68e78f359 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+		return -EINVAL;  /* not valid interrupts */
 
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
 
 EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63a30d1dd42..41bb65d5b91 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -59,6 +59,7 @@ config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410
 	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -70,6 +71,7 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -82,6 +84,7 @@ config ARCH_BAST
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -89,6 +92,7 @@ config ARCH_BAST
 config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -96,6 +100,7 @@ config MACH_AML_M5900
 	bool "AML M5900 Series"
 	select CPU_S3C2410
 	select PM_SIMTEC if PM
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the American Microsystems M5900 Series
            <http://www.amltd.com>
@@ -111,6 +116,7 @@ config BAST_PC104_IRQ
 config MACH_TCT_HAMMER
 	bool "TCT Hammer Board"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the TinCanTools Hammer Board
            <http://www.tincantools.com>
@@ -122,12 +128,14 @@ config MACH_VR1000
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
 config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 440c014e24b..dbf96e60d99 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132f39e..7974afca297 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long flags;
 	unsigned long val;
 
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
+	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+		return -EINVAL;
 
 	config &= 0xff;
 
-	pin -= S3C2410_GPG8;
+	pin -= S3C2410_GPG(8);
 	reg += pin & ~3;
 
 	local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186..5aabf117cbb 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 
 		state = 1;
 	}
@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
 		led_trigger_event(bt_led_trigger, 0);
 #endif
 
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 
@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
 #ifdef CONFIG_LEDS_H1940
 	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 13358ce2128..c3a2629e0de 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -3,7 +3,7 @@
  * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
+#include <plat/dma.h>
 #include <linux/sysdev.h>
-#include <mach/hardware.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
@@ -55,9 +55,9 @@ enum dma_ch {
 
 /* we have 4 dma channels */
 #ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
+#define S3C_DMA_CHANNELS		(4)
 #else
-#define S3C2410_DMA_CHANNELS		(6)
+#define S3C_DMA_CHANNELS		(6)
 #endif
 
 /* types */
@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
 	S3C2410_DMA_PAUSED
 };
 
-
 /* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
@@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
 	S3C2410_DMALOAD_1LOADED_1RUNNING,
 };
 
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
 
 /* flags */
 
@@ -139,17 +112,14 @@ enum s3c2410_chan_op {
 
 /* dma buffer */
 
-struct s3c2410_dma_client {
-	char                *name;
-};
+struct s3c2410_dma_buf;
 
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf;
 struct s3c2410_dma_buf {
 	struct s3c2410_dma_buf	*next;
 	int			 magic;		/* magic */
@@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
 
 /* [1] is this updated for both recv/send modes? */
 
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
 struct s3c2410_dma_stats {
 	unsigned long		loads;
 	unsigned long		timeout_longest;
@@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
 
 	/* channel configuration */
 	enum s3c2410_dmasrc	 source;
+	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
 	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
 
 	struct s3c24xx_dma_map	*map;		/* channel hw maps */
 
@@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
 	struct sys_device	dev;
 };
 
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
 
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb99ef1..8fe192081d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG10)
+	if (pin > S3C2410_GPG(10))
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
new file mode 100644
index 00000000000..801dff13858
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index ce1ec69806a..2edbb9c88ab 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -11,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
 #define S3C2410_GPIO_BANKA   (32*0)
@@ -21,3 +24,70 @@
 #define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0	S3C2410_GPA(0)
+#define S3C2410_GPA1	S3C2410_GPA(1)
+#define S3C2410_GPA3	S3C2410_GPA(3)
+#define S3C2410_GPA7	S3C2410_GPA(7)
+
+#define S3C2410_GPE0	S3C2410_GPE(0)
+#define S3C2410_GPE1	S3C2410_GPE(1)
+#define S3C2410_GPE2	S3C2410_GPE(2)
+#define S3C2410_GPE3	S3C2410_GPE(3)
+#define S3C2410_GPE4	S3C2410_GPE(4)
+#define S3C2410_GPE5	S3C2410_GPE(5)
+#define S3C2410_GPE6	S3C2410_GPE(6)
+#define S3C2410_GPE7	S3C2410_GPE(7)
+#define S3C2410_GPE8	S3C2410_GPE(8)
+#define S3C2410_GPE9	S3C2410_GPE(9)
+#define S3C2410_GPE10	S3C2410_GPE(10)
+
+#define S3C2410_GPH10	S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 51a88cf9526..15f0b3e7ce6 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -24,5 +24,6 @@
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
 
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a4024..aef5631eac5 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -15,101 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 255fdfeaf95..e99b212cb1c 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -84,7 +84,6 @@
 
 #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
 #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
@@ -102,6 +101,7 @@
 
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 35a03df473f..b278d0c45cc 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,104 +69,58 @@
 #define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -194,107 +148,69 @@
 
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 #define S3C2400_GPB11_INP    (0x00 << 22)
 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 #define S3C2400_GPB12_INP    (0x00 << 24)
 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 #define S3C2400_GPB13_INP    (0x00 << 26)
 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 #define S3C2400_GPB14_INP    (0x00 << 28)
 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 #define S3C2400_GPB15_INP    (0x00 << 30)
 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 #define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -315,99 +231,51 @@
 #define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -432,99 +300,51 @@
 #define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -550,34 +370,22 @@
 #define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -585,9 +393,6 @@
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -595,81 +400,48 @@
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -705,55 +477,31 @@
 #define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -778,117 +526,69 @@
 #define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -907,62 +607,29 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index b8687f71c30..6faadcee772 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,21 +11,13 @@
 */
 
 #include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
 
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
 arch_reset(char mode, const char *cmd)
 {
-	struct clk *wdtclk;
-
 	if (mode == 's') {
 		cpu_reset(0);
 	}
@@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
 	if (s3c24xx_reset_hook)
 		s3c24xx_reset_hook();
 
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
+	arch_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995afeb4..06a84adfb13 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
-		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
 static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 4389c160f7d..ce3baba2cd7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -588,13 +589,9 @@ static void __init bast_map_io(void)
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
 
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
-	usb_simtec_init();
 }
 
 static void __init bast_init(void)
@@ -602,12 +599,14 @@ static void __init bast_init(void)
 	sysdev_class_register(&bast_pm_sysclass);
 	sysdev_register(&bast_pm_sysdev);
 
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
 	i2c_register_board_info(0, bast_i2c_devs,
 				ARRAY_SIZE(bast_i2c_devs));
 
+	usb_simtec_init();
 	nor_simtec_init();
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da4c25..d9cd5ddecf4 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.udc_command		= h1940_udc_pullup,
-	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 2b83f870771..0f6ed61af41 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.udc_command		= n30_udc_pullup,
-	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Thumbwheel Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Thumbwheel Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Thumbwheel Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Joystick Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG6,
+		.gpio		= S3C2410_GPG(6),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG5,
+		.gpio		= S3C2410_GPG(5),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Joystick Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF3,
+		.gpio		= S3C2410_GPF(3),
 		.code		= SW_RADIO,
 		.desc		= "GPS Antenna",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG2,
+		.gpio		= S3C2410_GPG(2),
 		.code		= SW_HEADPHONE_INSERT,
 		.desc		= "Headphone",
 		.active_low	= 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG6,
+	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
 	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD9,
+	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9f1ba9b63f7..2cc9849eb44 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
 /* LED */
 
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
 		break;
 	}
 }
 
 static struct s3c2410_spigpio_info spi_gpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
+	.pin_clk	= S3C2410_GPG(7),
+	.pin_mosi	= S3C2410_GPG(6),
+	.pin_miso	= S3C2410_GPG(5),
 	.chip_select	= &spi_gpio_cs,
 };
 
@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9c5c5..1628cc773a2 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
 
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB1,
+	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB2,
+	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 87fc481d92d..143e08a599d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
 	}
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
 }
 
@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2410_GSTATUS2);
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d97e2..6cd9377ddb8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -18,9 +18,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/gpio.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -29,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+		gpio_set_value(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+		gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+	int ret;
+
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index ca99564ae4b..63586ffd0ae 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -38,6 +38,7 @@ menu "S3C2412 Machines"
 config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -50,6 +51,7 @@ config MACH_SMDK2413
 	select CPU_S3C2412
 	select MACH_S3C2413
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -72,6 +74,7 @@ config MACH_SMDK2412
 config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 9e3478506c6..f8d16fc10bc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8f0d37d43b4..8df506eac90 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
-	.pin_clk	= S3C2410_GPG8,
-	.pin_mosi	= S3C2410_GPB8,
+	.pin_clk	= S3C2410_GPG(8),
+	.pin_mosi	= S3C2410_GPB(8),
 	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
-	.pin_clk	= S3C2410_GPB4,
-	.pin_mosi	= S3C2410_GPB9,
+	.pin_clk	= S3C2410_GPB(4),
+	.pin_mosi	= S3C2410_GPB(9),
 	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
 };
 
 /* Jive power management device */
@@ -529,8 +530,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index eba66aa6bd2..9a5e4341972 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cde5ae9a434..5df73cbf2b4 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -43,6 +44,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -58,12 +60,14 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -76,6 +80,7 @@ config SMDK2440_CPU2440
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 69b6cf34df4..e08e081430f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 9c6abf9fb54..68f3870991b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e3127..dfc7010935d 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa972d7f..d43edede590 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a46685ce3..cba064b49a6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 8430e582918..397f3b5c0b4 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 6da82b5c09b..f5af212066c 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -5,4 +5,27 @@
 #
 # Licensed under GPLv2
 
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6400 CPU support
+
+config S3C6400_SETUP_SDHCI
+	bool
+	help
+	  Internal configuration for default SDHCI
+	  setup for S3C6400.
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C6400_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 8f397db25b8..df1ce4aa03e 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -12,4 +12,12 @@ obj-				:=
 
 # Core support for S3C6400 system
 
-obj-n				+= blank.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 9771ac2cb07..1067619f0ba 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -11,6 +11,63 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+	/* we will be supporting ciruclar buffers as soon as we have DMA
+	 * engine support.
+	 */
+	return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 8199972ed5b..5057d9948d3 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -39,6 +39,8 @@
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
@@ -57,6 +59,8 @@
 #define S3C64XX_PA_MODEM	(0x74108000)
 #define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
 
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -69,5 +73,7 @@
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
new file mode 100644
index 00000000000..a6c7f4eb3a1
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 090cfd969bc..2e58cb7a714 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <plat/watchdog-reset.h>
+
 static void arch_idle(void)
 {
 	/* nothing here yet */
@@ -18,7 +20,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	cpu_reset(0);
 }
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
new file mode 100644
index 00000000000..ab19285389a
--- /dev/null
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
new file mode 100644
index 00000000000..1ece887d90b
--- /dev/null
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -0,0 +1,89 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
new file mode 100644
index 00000000000..b93dafbee1f
--- /dev/null
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d501007002..e63aac7f4e5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -16,9 +16,18 @@ config CPU_S3C6410
 
 config S3C6410_SETUP_SDHCI
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal helper functions for S3C6410 based SDHCI systems
 
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
@@ -26,6 +35,8 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
 	select S3C6410_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
@@ -60,3 +71,29 @@ config SMDK6410_SD_CH1
 	  channels 0 and 1 are the same.
 
 endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 2cd4f189036..6f9deac8861 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 
 # machine support
 
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+
+
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 6a73ca6b7a3..ade904de889 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -31,6 +31,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c24xx_register_baseclocks(xtal);
 	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
+	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
new file mode 100644
index 00000000000..661cca63de2
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
new file mode 100644
index 00000000000..6030636f854
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e47e4f..bc9a7dea567 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -24,6 +24,12 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/smsc911x.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
 
 #include <video/platform_lcd.h>
 
@@ -39,8 +45,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
 
 #include <plat/s3c6410.h>
 #include <plat/clock.h>
@@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = 0x18000000,
+		.end   = 0x18000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_usb_hsotg,
 	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+	.consumer_supplies = dcdc6_consumers,
 };
 
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.always_on = 1,
+	},
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
+	{ WM8350_LDO_1, &wm8350_ldo1_data },
+	{ WM8350_LDO_2, &wm8350_ldo2_data },
+	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+};
+#endif
+
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {
@@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 
 static void __init smdk6410_map_io(void)
 {
+	u32 tmp;
+
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
 }
 
 static void __init smdk6410_machine_init(void)
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 0b5788bd598..20666f3bd47 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -21,8 +21,6 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
@@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	/* [3] = "48m", - note not succesfully used yet */
 };
 
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
 
 void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 				    void __iomem *r,
@@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
deleted file mode 100644
index 444f266ecc0..00000000000
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Based on spitz_pm.c and sharp code.
- *
- * Copyright (C) 2001  SHARP
- * Copyright 2005 Pavel Machek <pavel@suse.cz>
- *
- * Distribute under GPLv2.
- *
- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
- * and sometimes charges them when it should not. If it makes angry lithium to come your way...
- * ...well, you have been warned.
- *
- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
- * and my collie did not explode (yet).
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
-#include <mach/dma.h>
-#include <mach/collie.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-#include "../drivers/mfd/ucb1x00.h"
-
-static struct ucb1x00 *ucb;
-static int ad_revise;
-
-#define ADCtoPower(x)	       ((330 * x * 2) / 1024)
-
-static void collie_charger_init(void)
-{
-	int err;
-
-	if (sharpsl_param.adadj != -1)
-		ad_revise = sharpsl_param.adadj;
-
-	/* Register interrupt handler. */
-	if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
-			       "ACIN", sharpsl_ac_isr))) {
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
-		return;
-	}
-	if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
-			       "CO", sharpsl_chrg_full_isr))) {
-		free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
-		return;
-	}
-
-	gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
-	gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
-
-	ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
-			           COLLIE_TC35143_GPIO_BBAT_ON);
-	return;
-}
-
-static void collie_measure_temp(int on)
-{
-	if (on)
-		ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	else
-		ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-}
-
-static void collie_charge(int on)
-{
-	/* Zaurus seems to contain LTC1731; it should know when to
-	 * stop charging itself, so setting charge on should be
-	 * relatively harmless (as long as it is not done too often).
-	 */
-	gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
-}
-
-static void collie_discharge(int on)
-{
-}
-
-static void collie_discharge1(int on)
-{
-}
-
-static void collie_presuspend(void)
-{
-}
-
-static void collie_postsuspend(void)
-{
-}
-
-static int collie_should_wakeup(unsigned int resume_on_alarm)
-{
-	return 0;
-}
-
-static unsigned long collie_charger_wakeup(void)
-{
-	return 0;
-}
-
-int collie_read_backup_battery(void)
-{
-	int voltage;
-
-	ucb1x00_adc_enable(ucb);
-
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage);
-
-	return ADCtoPower(voltage);
-}
-
-int collie_read_main_battery(void)
-{
-	int voltage, voltage_rev, voltage_volts;
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-
-	mdelay(1);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	voltage_rev = voltage + ((ad_revise * voltage) / 652);
-	voltage_volts = ADCtoPower(voltage_rev);
-
-	printk("Main battery = %d(%d)\n", voltage_volts, voltage);
-
-	if (voltage != -1)
-		return voltage_volts;
-	else
-		return voltage;
-}
-
-int collie_read_temp(void)
-{
-	int voltage;
-
-	/* According to Sharp, temp must be > 973, main battery must be < 465,
-	   FIXME: sharpsl_pm.c has both conditions negated? FIXME: values
-	   are way out of range? */
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	/* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Battery temp = %d\n", voltage);
-	return voltage;
-}
-
-static unsigned long read_devdata(int which)
-{
-	switch (which) {
-	case SHARPSL_BATT_VOLT:
-		return collie_read_main_battery();
-	case SHARPSL_BATT_TEMP:
-		return collie_read_temp();
-	case SHARPSL_ACIN_VOLT:
-		return 500;
-	case SHARPSL_STATUS_ACIN: {
-		int ret = GPLR & COLLIE_GPIO_AC_IN;
-		printk("AC status = %d\n", ret);
-		return ret;
-	}
-	case SHARPSL_STATUS_FATAL: {
-		int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW;
-		printk("Fatal bat = %d\n", ret);
-		return ret;
-	}
-	default:
-		return ~0;
-	}
-}
-
-struct battery_thresh collie_battery_levels_acin[] = {
-	{ 420, 100},
-	{ 417,  95},
-	{ 415,  90},
-	{ 413,  80},
-	{ 411,  75},
-	{ 408,  70},
-	{ 406,  60},
-	{ 403,  50},
-	{ 398,  40},
-	{ 391,  25},
-	{  10,   5},
-	{   0,   0},
-};
-
-struct battery_thresh collie_battery_levels[] = {
-	{ 394, 100},
-	{ 390,  95},
-	{ 380,  90},
-	{ 370,  80},
-	{ 368,  75},	/* From sharp code: battery high with frontlight */
-	{ 366,  70},	/* 60..90 -- fake values invented by me for testing */
-	{ 364,  60},
-	{ 362,  50},
-	{ 360,  40},
-	{ 358,  25},	/* From sharp code: battery low with frontlight */
-	{ 356,   5},	/* From sharp code: battery verylow with frontlight */
-	{   0,   0},
-};
-
-struct sharpsl_charger_machinfo collie_pm_machinfo = {
-	.init             = collie_charger_init,
-	.read_devdata	  = read_devdata,
-	.discharge        = collie_discharge,
-	.discharge1       = collie_discharge1,
-	.charge           = collie_charge,
-	.measure_temp     = collie_measure_temp,
-	.presuspend       = collie_presuspend,
-	.postsuspend      = collie_postsuspend,
-	.charger_wakeup   = collie_charger_wakeup,
-	.should_wakeup    = collie_should_wakeup,
-	.bat_levels       = 12,
-	.bat_levels_noac  = collie_battery_levels,
-	.bat_levels_acin  = collie_battery_levels_acin,
-	.status_high_acin = 368,
-	.status_low_acin  = 358,
-	.status_high_noac = 368,
-	.status_low_noac  = 358,
-	.charge_on_volt	  = 350,	/* spitz uses 2.90V, but lets play it safe. */
-	.charge_on_temp   = 550,
-	.charge_acin_high = 550,	/* collie does not seem to have sensor for this, anyway */
-	.charge_acin_low  = 450,	/* ignored, too */
-	.fatal_acin_volt  = 356,
-	.fatal_noacin_volt = 356,
-
-	.batfull_irq = 1,		/* We do not want periodical charge restarts */
-};
-
-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
-{
-	sharpsl_pm.machinfo = &collie_pm_machinfo;
-	ucb = pdev->ucb;
-	return 0;
-}
-
-static struct ucb1x00_driver collie_pm_ucb_driver = {
-	.add	= collie_pm_ucb_add,
-};
-
-static struct platform_device *collie_pm_device;
-
-static int __init collie_pm_init(void)
-{
-	int ret;
-
-	collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!collie_pm_device)
-		return -ENOMEM;
-
-	collie_pm_device->dev.platform_data = &collie_pm_machinfo;
-	ret = platform_device_add(collie_pm_device);
-
-	if (ret)
-		platform_device_put(collie_pm_device);
-
-	if (!ret)
-		ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
-
-	return ret;
-}
-
-static void __exit collie_pm_exit(void)
-{
-	ucb1x00_unregister_driver(&collie_pm_ucb_driver);
-	platform_device_unregister(collie_pm_device);
-}
-
-module_init(collie_pm_init);
-module_exit(collie_pm_exit);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 28cf3696797..506a5e5a9ad 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
  * timeout after <timeout> rounds. Needs mcu running before its called.
  *
  * returns : %mcu output on success
- *	   : %-ETIMEOUT on timeout
+ *	   : %-ETIMEDOUT on timeout
  */
 int jornada_ssp_byte(u8 byte)
 {
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
  * jornada_ssp_inout - decide if input is command or trading byte
  *
  * returns : (jornada_ssp_byte(byte)) on success
- *         : %-ETIMEOUT on timeout failure
+ *         : %-ETIMEDOUT on timeout failure
  */
 int jornada_ssp_inout(u8 byte)
 {
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
new file mode 100644
index 00000000000..d156f76b379
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
+obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..731a92286da
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x70]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x7f
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
new file mode 100644
index 00000000000..cc59673becd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/irqs.h
@@ -0,0 +1,95 @@
+/*
+ * Freescale STMP378X interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#define IRQ_DEBUG_UART			0
+#define IRQ_COMMS_RX			1
+#define IRQ_COMMS_TX			1
+#define IRQ_SSP2_ERROR			2
+#define IRQ_VDD5V			3
+#define IRQ_HEADPHONE_SHORT		4
+#define IRQ_DAC_DMA			5
+#define IRQ_DAC_ERROR			6
+#define IRQ_ADC_DMA			7
+#define IRQ_ADC_ERROR			8
+#define IRQ_SPDIF_DMA			9
+#define IRQ_SAIF2_DMA			9
+#define IRQ_SPDIF_ERROR			10
+#define IRQ_SAIF1_IRQ			10
+#define IRQ_SAIF2_IRQ			10
+#define IRQ_USB_CTRL			11
+#define IRQ_USB_WAKEUP			12
+#define IRQ_GPMI_DMA			13
+#define IRQ_SSP1_DMA			14
+#define IRQ_SSP_ERROR			15
+#define IRQ_GPIO0			16
+#define IRQ_GPIO1			17
+#define IRQ_GPIO2			18
+#define IRQ_SAIF1_DMA			19
+#define IRQ_SSP2_DMA			20
+#define IRQ_ECC8_IRQ			21
+#define IRQ_RTC_ALARM			22
+#define IRQ_UARTAPP_TX_DMA		23
+#define IRQ_UARTAPP_INTERNAL		24
+#define IRQ_UARTAPP_RX_DMA		25
+#define IRQ_I2C_DMA			26
+#define IRQ_I2C_ERROR			27
+#define IRQ_TIMER0			28
+#define IRQ_TIMER1			29
+#define IRQ_TIMER2			30
+#define IRQ_TIMER3			31
+#define IRQ_BATT_BRNOUT			32
+#define IRQ_VDDD_BRNOUT			33
+#define IRQ_VDDIO_BRNOUT		34
+#define IRQ_VDD18_BRNOUT		35
+#define IRQ_TOUCH_DETECT		36
+#define IRQ_LRADC_CH0			37
+#define IRQ_LRADC_CH1			38
+#define IRQ_LRADC_CH2			39
+#define IRQ_LRADC_CH3			40
+#define IRQ_LRADC_CH4			41
+#define IRQ_LRADC_CH5			42
+#define IRQ_LRADC_CH6			43
+#define IRQ_LRADC_CH7			44
+#define IRQ_LCDIF_DMA			45
+#define IRQ_LCDIF_ERROR			46
+#define IRQ_DIGCTL_DEBUG_TRAP		47
+#define IRQ_RTC_1MSEC			48
+#define IRQ_DRI_DMA			49
+#define IRQ_DRI_ATTENTION		50
+#define IRQ_GPMI_ATTENTION		51
+#define IRQ_IR				52
+#define IRQ_DCP_VMI			53
+#define IRQ_DCP				54
+#define IRQ_BCH				56
+#define IRQ_PXP				57
+#define IRQ_UARTAPP2_TX_DMA		58
+#define IRQ_UARTAPP2_INTERNAL		59
+#define IRQ_UARTAPP2_RX_DMA		60
+#define IRQ_VDAC_DETECT			61
+#define IRQ_VDD5V_DROOP			64
+#define IRQ_DCDC4P2_BO			65
+
+
+#define NR_REAL_IRQS	128
+#define NR_IRQS		(NR_REAL_IRQS + 32 * 3)
+
+/* All interrupts are FIQ capable */
+#define FIQ_START		IRQ_DEBUG_UART
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
new file mode 100644
index 00000000000..93f952d3596
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/pins.h
@@ -0,0 +1,151 @@
+/*
+ * Freescale STMP378X SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_CLE		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_ALE		STMP3XXX_PINID(0, 17)
+#define PINID_GMPI_CE2N		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY1		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_WPN		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_AUART1_CTS	STMP3XXX_PINID(0, 26)
+#define PINID_AUART1_RTS	STMP3XXX_PINID(0, 27)
+#define PINID_AUART1_RX		STMP3XXX_PINID(0, 28)
+#define PINID_AUART1_TX		STMP3XXX_PINID(0, 29)
+#define PINID_I2C_SCL		STMP3XXX_PINID(0, 30)
+#define PINID_I2C_SDA		STMP3XXX_PINID(0, 31)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_D16		STMP3XXX_PINID(1, 16)
+#define PINID_LCD_D17		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_RESET		STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_WR		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 21)
+#define PINID_LCD_DOTCK		STMP3XXX_PINID(1, 22)
+#define PINID_LCD_ENABLE	STMP3XXX_PINID(1, 23)
+#define PINID_LCD_HSYNC		STMP3XXX_PINID(1, 24)
+#define PINID_LCD_VSYNC		STMP3XXX_PINID(1, 25)
+#define PINID_PWM0		STMP3XXX_PINID(1, 26)
+#define PINID_PWM1		STMP3XXX_PINID(1, 27)
+#define PINID_PWM2		STMP3XXX_PINID(1, 28)
+#define PINID_PWM3		STMP3XXX_PINID(1, 29)
+#define PINID_PWM4		STMP3XXX_PINID(1, 30)
+
+/* Bank 2 */
+#define PINID_SSP1_CMD		STMP3XXX_PINID(2, 0)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(2, 1)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(2, 2)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(2, 3)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(2, 4)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(2, 5)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(2, 6)
+#define PINID_ROTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_BA0		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_BA1		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 26)
+#define PINID_GPMI_CE1N		STMP3XXX_PINID(2, 27)
+#define PINID_GPMI_CE0N		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..dbcf85b6ac2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
@@ -0,0 +1,101 @@
+/*
+ * stmp378x: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+#define REGS_APBH_PHYS	0x80004000
+#define REGS_APBH_SIZE	0x2000
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_CTRL2		0x20
+
+#define HW_APBH_DEVSEL		0x30
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBH_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBH_CHn_CMD_COMMAND	0x00000003
+#define BP_APBH_CHn_CMD_COMMAND	0
+#define BM_APBH_CHn_CMD_CHAIN	0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..3b934a4d27f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
@@ -0,0 +1,119 @@
+/*
+ * stmp378x: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+#define REGS_APBX_PHYS	0x80024000
+#define REGS_APBX_SIZE	0x2000
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_CTRL2		0x20
+
+#define HW_APBX_CHANNEL_CTRL	0x30
+#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL	0xFFFF0000
+#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL	16
+
+#define HW_APBX_DEVSEL		0x40
+
+#define HW_APBX_CH0_NXTCMDAR	(0x110 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x110 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x110 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x110 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x110 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x110 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x110 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x110 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x110 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x110 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x110 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x110 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x110 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x110 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x110 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x110 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x110
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBX_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_HALTONTERMINATE	0x00000100
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x130 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x130 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x130 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x130 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x130 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x130 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x130 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x130 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x130 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x130 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x130 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x130 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x130 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x130 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x130 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x130 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x130
+
+#define HW_APBX_CH0_SEMA	(0x140 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x140 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x140 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x140 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x140 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x140 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x140 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x140 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x140 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x140 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x140 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x140 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x140 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x140 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x140 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x140 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x140
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
+
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..641ac6126f8
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+#define REGS_AUDIOIN_PHYS	0x8004C000
+#define REGS_AUDIOIN_SIZE	0x2000
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..f533e23694a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
@@ -0,0 +1,104 @@
+/*
+ * stmp378x: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+#define REGS_AUDIOOUT_PHYS	0x80048000
+#define REGS_AUDIOOUT_SIZE	0x2000
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_SPEAKER	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_SPEAKERCTRL	0x100
+#define BM_AUDIOOUT_SPEAKERCTRL_MUTE	0x01000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
new file mode 100644
index 00000000000..532d2465071
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
@@ -0,0 +1,56 @@
+/*
+ * stmp378x: BCH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_BCH_BASE	(STMP3XXX_REGS_BASE + 0xA000)
+#define REGS_BCH_PHYS	0x8000A000
+#define REGS_BCH_SIZE	0x2000
+
+#define HW_BCH_CTRL		0x0
+#define BM_BCH_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_BCH_CTRL_COMPLETE_IRQ	0
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN	0x00000100
+
+#define HW_BCH_STATUS0		0x10
+#define BM_BCH_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_BCH_STATUS0_CORRECTED	0x00000008
+#define BM_BCH_STATUS0_STATUS_BLK0	0x0000FF00
+#define BP_BCH_STATUS0_STATUS_BLK0	8
+#define BM_BCH_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_BCH_STATUS0_COMPLETED_CE	16
+
+#define HW_BCH_LAYOUTSELECT	0x70
+
+#define HW_BCH_FLASH0LAYOUT0	0x80
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE	0
+#define BM_BCH_FLASH0LAYOUT0_ECC0	0x0000F000
+#define BP_BCH_FLASH0LAYOUT0_ECC0	12
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	0x00FF0000
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE	16
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	0xFF000000
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS	24
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE	0
+#define BM_BCH_FLASH0LAYOUT1_ECCN	0x0000F000
+#define BP_BCH_FLASH0LAYOUT1_ECCN	12
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE	0xFFFF0000
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE	16
+
+#define HW_BCH_BLOCKNAME	0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..7c546afd57a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp378x: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+#define REGS_CLKCTRL_PHYS	0x80040000
+#define REGS_CLKCTRL_SIZE	0x2000
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00000FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_TV		0xD0
+
+#define HW_CLKCTRL_ETM		0xE0
+
+#define HW_CLKCTRL_FRAC		0xF0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_FRAC1	0x100
+
+#define HW_CLKCTRL_CLKSEQ	0x110
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0x120
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
new file mode 100644
index 00000000000..fdedd00c0e2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: DCP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DCP_BASE	(STMP3XXX_REGS_BASE + 0x28000)
+#define REGS_DCP_PHYS	0x80028000
+#define REGS_DCP_SIZE	0x2000
+
+#define HW_DCP_CTRL		0x0
+#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0x000000FF
+#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0
+#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING	0x00400000
+#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES	0x00800000
+#define BM_DCP_CTRL_CLKGATE	0x40000000
+#define BM_DCP_CTRL_SFTRST	0x80000000
+
+#define HW_DCP_STAT		0x10
+#define BM_DCP_STAT_IRQ		0x0000000F
+#define BP_DCP_STAT_IRQ		0
+
+#define HW_DCP_CHANNELCTRL	0x20
+#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL	0x000000FF
+#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL	0
+
+#define HW_DCP_CONTEXT		0x50
+#define BM_DCP_PACKET1_INTERRUPT	0x00000001
+#define BP_DCP_PACKET1_INTERRUPT	0
+#define BM_DCP_PACKET1_DECR_SEMAPHORE	0x00000002
+#define BM_DCP_PACKET1_CHAIN	0x00000004
+#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS	0x00000008
+#define BM_DCP_PACKET1_ENABLE_CIPHER	0x00000020
+#define BM_DCP_PACKET1_ENABLE_HASH	0x00000040
+#define BM_DCP_PACKET1_CIPHER_ENCRYPT	0x00000100
+#define BM_DCP_PACKET1_CIPHER_INIT	0x00000200
+#define BM_DCP_PACKET1_OTP_KEY	0x00000400
+#define BM_DCP_PACKET1_PAYLOAD_KEY	0x00000800
+#define BM_DCP_PACKET1_HASH_INIT	0x00001000
+#define BM_DCP_PACKET1_HASH_TERM	0x00002000
+#define BM_DCP_PACKET2_CIPHER_SELECT	0x0000000F
+#define BP_DCP_PACKET2_CIPHER_SELECT	0
+#define BM_DCP_PACKET2_CIPHER_MODE	0x000000F0
+#define BP_DCP_PACKET2_CIPHER_MODE	4
+#define BM_DCP_PACKET2_KEY_SELECT	0x0000FF00
+#define BP_DCP_PACKET2_KEY_SELECT	8
+#define BM_DCP_PACKET2_HASH_SELECT	0x000F0000
+#define BP_DCP_PACKET2_HASH_SELECT	16
+#define BM_DCP_PACKET2_CIPHER_CFG	0xFF000000
+#define BP_DCP_PACKET2_CIPHER_CFG	24
+
+#define HW_DCP_CH0CMDPTR	(0x100 + 0 * 0x40)
+#define HW_DCP_CH1CMDPTR	(0x100 + 1 * 0x40)
+#define HW_DCP_CH2CMDPTR	(0x100 + 2 * 0x40)
+#define HW_DCP_CH3CMDPTR	(0x100 + 3 * 0x40)
+
+#define HW_DCP_CHnCMDPTR	0x100
+
+#define HW_DCP_CH0SEMA		(0x110 + 0 * 0x40)
+#define HW_DCP_CH1SEMA		(0x110 + 1 * 0x40)
+#define HW_DCP_CH2SEMA		(0x110 + 2 * 0x40)
+#define HW_DCP_CH3SEMA		(0x110 + 3 * 0x40)
+
+#define HW_DCP_CHnSEMA		0x110
+#define BM_DCP_CHnSEMA_INCREMENT	0x000000FF
+#define BP_DCP_CHnSEMA_INCREMENT	0
+
+#define HW_DCP_CH0STAT		(0x120 + 0 * 0x40)
+#define HW_DCP_CH1STAT		(0x120 + 1 * 0x40)
+#define HW_DCP_CH2STAT		(0x120 + 2 * 0x40)
+#define HW_DCP_CH3STAT		(0x120 + 3 * 0x40)
+
+#define HW_DCP_CHnSTAT		0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..5293005523b
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
@@ -0,0 +1,38 @@
+/*
+ * stmp378x: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+#define REGS_DIGCTL_PHYS	0x8001C000
+#define REGS_DIGCTL_SIZE	0x2000
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
+
+#define HW_DIGCTL_ARMCACHE	0x2B0
+#define BM_DIGCTL_ARMCACHE_ITAG_SS	0x00000003
+#define BP_DIGCTL_ARMCACHE_ITAG_SS	0
+#define BM_DIGCTL_ARMCACHE_DTAG_SS	0x00000030
+#define BP_DIGCTL_ARMCACHE_DTAG_SS	4
+#define BM_DIGCTL_ARMCACHE_CACHE_SS	0x00000300
+#define BP_DIGCTL_ARMCACHE_CACHE_SS	8
+#define BM_DIGCTL_ARMCACHE_DRTY_SS	0x00003000
+#define BP_DIGCTL_ARMCACHE_DRTY_SS	12
+#define BM_DIGCTL_ARMCACHE_VALID_SS	0x00030000
+#define BP_DIGCTL_ARMCACHE_VALID_SS	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
new file mode 100644
index 00000000000..02851431677
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
@@ -0,0 +1,27 @@
+/*
+ * stmp378x: DRAM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRAM_BASE	(STMP3XXX_REGS_BASE + 0xE0000)
+#define REGS_DRAM_PHYS	0x800E0000
+#define REGS_DRAM_SIZE	0x2000
+
+#define HW_DRAM_CTL06		0x18
+
+#define HW_DRAM_CTL08		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
new file mode 100644
index 00000000000..da25f7e397e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: DRI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRI_BASE	(STMP3XXX_REGS_BASE + 0x74000)
+#define REGS_DRI_PHYS	0x80074000
+#define REGS_DRI_SIZE	0x2000
+
+#define HW_DRI_CTRL		0x0
+#define BM_DRI_CTRL_RUN		0x00000001
+#define BP_DRI_CTRL_RUN		0
+#define BM_DRI_CTRL_ATTENTION_IRQ	0x00000002
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ	0x00000004
+#define BM_DRI_CTRL_OVERFLOW_IRQ	0x00000008
+#define BM_DRI_CTRL_ATTENTION_IRQ_EN	0x00000200
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN	0x00000400
+#define BM_DRI_CTRL_OVERFLOW_IRQ_EN	0x00000800
+#define BM_DRI_CTRL_REACQUIRE_PHASE	0x00008000
+#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR	0x02000000
+#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR	0x04000000
+#define BM_DRI_CTRL_ENABLE_INPUTS	0x20000000
+#define BM_DRI_CTRL_CLKGATE	0x40000000
+#define BM_DRI_CTRL_SFTRST	0x80000000
+
+#define HW_DRI_TIMING		0x10
+#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL	0x000000FF
+#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL	0
+#define BM_DRI_TIMING_PILOT_REP_RATE	0x000F0000
+#define BP_DRI_TIMING_PILOT_REP_RATE	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..cc353bec331
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
@@ -0,0 +1,39 @@
+/*
+ * stmp378x: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+#define REGS_ECC8_PHYS	0x80008000
+#define REGS_ECC8_SIZE	0x2000
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
new file mode 100644
index 00000000000..98773fc33d7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
@@ -0,0 +1,25 @@
+/*
+ * stmp378x: EMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_EMI_BASE	(STMP3XXX_REGS_BASE + 0x20000)
+#define REGS_EMI_PHYS	0x80020000
+#define REGS_EMI_SIZE	0x2000
+
+#define HW_EMI_STAT		0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..2cc8bbe9168
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
@@ -0,0 +1,78 @@
+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY	12
+#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..13a234c9943
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp378x: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..f996e80f40e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+#define REGS_ICOLL_PHYS	0x80000000
+#define REGS_ICOLL_SIZE	0x2000
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+#define BM_ICOLL_LEVELACK_IRQLEVELACK	0x0000000F
+#define BP_ICOLL_LEVELACK_IRQLEVELACK	0
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x70
+
+#define HW_ICOLL_INTERRUPTn	0x120
+
+#define HW_ICOLL_INTERRUPTn	0x120
+#define BM_ICOLL_INTERRUPTn_ENABLE	0x00000004
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
index e22ba789546..a5b4ef10fab 100644
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
@@ -1,7 +1,8 @@
 /*
- *  linux/include/asm-arm/imx/timex.h
+ * stmp378x: IR register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,12 +16,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(16000000)
-
-#endif
+#define REGS_IR_BASE	(STMP3XXX_REGS_BASE + 0x78000)
+#define REGS_IR_PHYS	0x80078000
+#define REGS_IR_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..9cdbef4badc
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
@@ -0,0 +1,195 @@
+/*
+ * stmp378x: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_RUN	0x00000001
+#define BP_LCDIF_CTRL_RUN	0
+#define BM_LCDIF_CTRL_LCDIF_MASTER	0x00000020
+#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC	0x00000080
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00000300
+#define BP_LCDIF_CTRL_WORD_LENGTH	8
+#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH	0x00000C00
+#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH	10
+#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE	0x0000C000
+#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE	14
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00010000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00020000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00040000
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00080000
+#define BM_LCDIF_CTRL_DVI_MODE	0x00100000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x03E00000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	21
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x04000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x08000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+#define BM_LCDIF_CTRL1_INTERLACE_FIELDS	0x00800000
+#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW	0x01000000
+
+#define HW_LCDIF_TRANSFER_COUNT	0x20
+#define BM_LCDIF_TRANSFER_COUNT_H_COUNT	0x0000FFFF
+#define BP_LCDIF_TRANSFER_COUNT_H_COUNT	0
+#define BM_LCDIF_TRANSFER_COUNT_V_COUNT	0xFFFF0000
+#define BP_LCDIF_TRANSFER_COUNT_V_COUNT	16
+
+#define HW_LCDIF_CUR_BUF	0x30
+
+#define HW_LCDIF_NEXT_BUF	0x40
+
+#define HW_LCDIF_TIMING		0x60
+
+#define HW_LCDIF_VDCTRL0	0x70
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0x0003FFFF
+#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x80
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0xFFFFFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+
+#define HW_LCDIF_VDCTRL2	0x90
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x0003FFFF
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF000000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	24
+
+#define HW_LCDIF_VDCTRL3	0xA0
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x0000FFFF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x0FFF0000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	16
+
+#define HW_LCDIF_VDCTRL4	0xB0
+#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0x0003FFFF
+#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON	0x00040000
+
+#define HW_LCDIF_DVICTRL0	0xC0
+#define BM_LCDIF_DVICTRL0_V_LINES_CNT	0x000003FF
+#define BP_LCDIF_DVICTRL0_V_LINES_CNT	0
+#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT	0x000FFC00
+#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT	10
+#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT	0x7FF00000
+#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT	20
+
+#define HW_LCDIF_DVICTRL1	0xD0
+#define BM_LCDIF_DVICTRL1_F2_START_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL1_F2_START_LINE	0
+#define BM_LCDIF_DVICTRL1_F1_END_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL1_F1_END_LINE	10
+#define BM_LCDIF_DVICTRL1_F1_START_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL1_F1_START_LINE	20
+
+#define HW_LCDIF_DVICTRL2	0xE0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE	10
+#define BM_LCDIF_DVICTRL2_F2_END_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL2_F2_END_LINE	20
+
+#define HW_LCDIF_DVICTRL3	0xF0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE	0x03FF0000
+#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE	16
+
+#define HW_LCDIF_DVICTRL4	0x100
+#define BM_LCDIF_DVICTRL4_H_FILL_CNT	0x000000FF
+#define BP_LCDIF_DVICTRL4_H_FILL_CNT	0
+#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE	0x0000FF00
+#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE	8
+#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE	0x00FF0000
+#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE	16
+#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE	0xFF000000
+#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE	24
+
+#define HW_LCDIF_CSC_COEFF0	0x110
+#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0x00000003
+#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0
+#define BM_LCDIF_CSC_COEFF0_C0	0x03FF0000
+#define BP_LCDIF_CSC_COEFF0_C0	16
+
+#define HW_LCDIF_CSC_COEFF1	0x120
+#define BM_LCDIF_CSC_COEFF1_C1	0x000003FF
+#define BP_LCDIF_CSC_COEFF1_C1	0
+#define BM_LCDIF_CSC_COEFF1_C2	0x03FF0000
+#define BP_LCDIF_CSC_COEFF1_C2	16
+
+#define HW_LCDIF_CSC_COEFF2	0x130
+#define BM_LCDIF_CSC_COEFF2_C3	0x000003FF
+#define BP_LCDIF_CSC_COEFF2_C3	0
+#define BM_LCDIF_CSC_COEFF2_C4	0x03FF0000
+#define BP_LCDIF_CSC_COEFF2_C4	16
+
+#define HW_LCDIF_CSC_COEFF3	0x140
+#define BM_LCDIF_CSC_COEFF3_C5	0x000003FF
+#define BP_LCDIF_CSC_COEFF3_C5	0
+#define BM_LCDIF_CSC_COEFF3_C6	0x03FF0000
+#define BP_LCDIF_CSC_COEFF3_C6	16
+
+#define HW_LCDIF_CSC_COEFF4	0x150
+#define BM_LCDIF_CSC_COEFF4_C7	0x000003FF
+#define BP_LCDIF_CSC_COEFF4_C7	0
+#define BM_LCDIF_CSC_COEFF4_C8	0x03FF0000
+#define BP_LCDIF_CSC_COEFF4_C8	16
+
+#define HW_LCDIF_CSC_OFFSET	0x160
+#define BM_LCDIF_CSC_OFFSET_Y_OFFSET	0x000001FF
+#define BP_LCDIF_CSC_OFFSET_Y_OFFSET	0
+#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET	0x01FF0000
+#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET	16
+
+#define HW_LCDIF_CSC_LIMIT	0x170
+#define BM_LCDIF_CSC_LIMIT_Y_MAX	0x000000FF
+#define BP_LCDIF_CSC_LIMIT_Y_MAX	0
+#define BM_LCDIF_CSC_LIMIT_Y_MIN	0x0000FF00
+#define BP_LCDIF_CSC_LIMIT_Y_MIN	8
+#define BM_LCDIF_CSC_LIMIT_CBCR_MAX	0x00FF0000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MAX	16
+#define BM_LCDIF_CSC_LIMIT_CBCR_MIN	0xFF000000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MIN	24
+
+#define HW_LCDIF_STAT		0x1D0
+#define BM_LCDIF_STAT_TXFIFO_EMPTY	0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cb8cb06f827
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
@@ -0,0 +1,99 @@
+/*
+ * stmp378x: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+#define REGS_LRADC_PHYS	0x80050000
+#define REGS_LRADC_SIZE	0x2000
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
new file mode 100644
index 00000000000..f0af64d9937
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: OCOTP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_OCOTP_BASE	(STMP3XXX_REGS_BASE + 0x2C000)
+#define REGS_OCOTP_PHYS	0x8002C000
+#define REGS_OCOTP_SIZE	0x2000
+
+#define HW_OCOTP_CTRL		0x0
+#define BM_OCOTP_CTRL_BUSY	0x00000100
+#define BM_OCOTP_CTRL_ERROR	0x00000200
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	0x00001000
+#define BM_OCOTP_CTRL_RELOAD_SHADOWS	0x00002000
+#define BM_OCOTP_CTRL_WR_UNLOCK	0xFFFF0000
+#define BP_OCOTP_CTRL_WR_UNLOCK	16
+
+#define HW_OCOTP_DATA		0x10
+
+#define HW_OCOTP_CUST0		(0x20 + 0 * 0x10)
+#define HW_OCOTP_CUST1		(0x20 + 1 * 0x10)
+#define HW_OCOTP_CUST2		(0x20 + 2 * 0x10)
+#define HW_OCOTP_CUST3		(0x20 + 3 * 0x10)
+
+#define HW_OCOTP_CUSTn		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..50d90ea1b13
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
@@ -0,0 +1,90 @@
+/*
+ * stmp378x: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+#define REGS_PINCTRL_PHYS	0x80018000
+#define REGS_PINCTRL_SIZE	0x2000
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x400
+#define HW_PINCTRL_PULL1	0x410
+#define HW_PINCTRL_PULL2	0x420
+#define HW_PINCTRL_PULL3	0x430
+
+#define HW_PINCTRL_DOUT0	0x500
+#define HW_PINCTRL_DOUT1	0x510
+#define HW_PINCTRL_DOUT2	0x520
+
+#define HW_PINCTRL_DIN0		0x600
+#define HW_PINCTRL_DIN1		0x610
+#define HW_PINCTRL_DIN2		0x620
+
+#define HW_PINCTRL_DOE0		0x700
+#define HW_PINCTRL_DOE1		0x710
+#define HW_PINCTRL_DOE2		0x720
+
+#define HW_PINCTRL_PIN2IRQ0	0x800
+#define HW_PINCTRL_PIN2IRQ1	0x810
+#define HW_PINCTRL_PIN2IRQ2	0x820
+
+#define HW_PINCTRL_IRQEN0	0x900
+#define HW_PINCTRL_IRQEN1	0x910
+#define HW_PINCTRL_IRQEN2	0x920
+
+#define HW_PINCTRL_IRQLEVEL0	0xA00
+#define HW_PINCTRL_IRQLEVEL1	0xA10
+#define HW_PINCTRL_IRQLEVEL2	0xA20
+
+#define HW_PINCTRL_IRQPOL0	0xB00
+#define HW_PINCTRL_IRQPOL1	0xB10
+#define HW_PINCTRL_IRQPOL2	0xB20
+
+#define HW_PINCTRL_IRQSTAT0	0xC00
+#define HW_PINCTRL_IRQSTAT1	0xC10
+#define HW_PINCTRL_IRQSTAT2	0xC20
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
new file mode 100644
index 00000000000..e454c830f07
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+#define REGS_POWER_PHYS	0x80044000
+#define REGS_POWER_SIZE	0x2000
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0x00000001
+#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0
+#define BM_POWER_CTRL_ENIRQ_PSWITCH	0x00020000
+#define BM_POWER_CTRL_PSWITCH_IRQ	0x00100000
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT	0x00000040
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xC0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000200
+
+#define HW_POWER_RESET		0x100
+
+#define HW_POWER_DEBUG		0x110
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..0d0f9e56ec7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
@@ -0,0 +1,53 @@
+/*
+ * stmp378x: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+#define REGS_PWM_PHYS	0x80064000
+#define REGS_PWM_SIZE	0x2000
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
new file mode 100644
index 00000000000..54d297896de
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
@@ -0,0 +1,140 @@
+/*
+ * stmp378x: PXP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PXP_BASE	(STMP3XXX_REGS_BASE + 0x2A000)
+#define REGS_PXP_PHYS	0x8002A000
+#define REGS_PXP_SIZE	0x2000
+
+#define HW_PXP_CTRL		0x0
+#define BM_PXP_CTRL_ENABLE	0x00000001
+#define BP_PXP_CTRL_ENABLE	0
+#define BM_PXP_CTRL_IRQ_ENABLE	0x00000002
+#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT	0x000000F0
+#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT	4
+#define BM_PXP_CTRL_ROTATE	0x00000300
+#define BP_PXP_CTRL_ROTATE	8
+#define BM_PXP_CTRL_HFLIP	0x00000400
+#define BM_PXP_CTRL_VFLIP	0x00000800
+#define BM_PXP_CTRL_S0_FORMAT	0x0000F000
+#define BP_PXP_CTRL_S0_FORMAT	12
+#define BM_PXP_CTRL_SCALE	0x00040000
+#define BM_PXP_CTRL_CROP	0x00080000
+
+#define HW_PXP_STAT		0x10
+#define BM_PXP_STAT_IRQ		0x00000001
+#define BP_PXP_STAT_IRQ		0
+
+#define HW_PXP_RGBBUF		0x20
+
+#define HW_PXP_RGBSIZE		0x40
+#define BM_PXP_RGBSIZE_HEIGHT	0x00000FFF
+#define BP_PXP_RGBSIZE_HEIGHT	0
+#define BM_PXP_RGBSIZE_WIDTH	0x00FFF000
+#define BP_PXP_RGBSIZE_WIDTH	12
+
+#define HW_PXP_S0BUF		0x50
+
+#define HW_PXP_S0UBUF		0x60
+
+#define HW_PXP_S0VBUF		0x70
+
+#define HW_PXP_S0PARAM		0x80
+#define BM_PXP_S0PARAM_HEIGHT	0x000000FF
+#define BP_PXP_S0PARAM_HEIGHT	0
+#define BM_PXP_S0PARAM_WIDTH	0x0000FF00
+#define BP_PXP_S0PARAM_WIDTH	8
+#define BM_PXP_S0PARAM_YBASE	0x00FF0000
+#define BP_PXP_S0PARAM_YBASE	16
+#define BM_PXP_S0PARAM_XBASE	0xFF000000
+#define BP_PXP_S0PARAM_XBASE	24
+
+#define HW_PXP_S0BACKGROUND	0x90
+
+#define HW_PXP_S0CROP		0xA0
+#define BM_PXP_S0CROP_HEIGHT	0x000000FF
+#define BP_PXP_S0CROP_HEIGHT	0
+#define BM_PXP_S0CROP_WIDTH	0x0000FF00
+#define BP_PXP_S0CROP_WIDTH	8
+#define BM_PXP_S0CROP_YBASE	0x00FF0000
+#define BP_PXP_S0CROP_YBASE	16
+#define BM_PXP_S0CROP_XBASE	0xFF000000
+#define BP_PXP_S0CROP_XBASE	24
+
+#define HW_PXP_S0SCALE		0xB0
+#define BM_PXP_S0SCALE_XSCALE	0x00003FFF
+#define BP_PXP_S0SCALE_XSCALE	0
+#define BM_PXP_S0SCALE_YSCALE	0x3FFF0000
+#define BP_PXP_S0SCALE_YSCALE	16
+
+#define HW_PXP_CSCCOEFF0	0xD0
+
+#define HW_PXP_CSCCOEFF1	0xE0
+
+#define HW_PXP_CSCCOEFF2	0xF0
+
+#define HW_PXP_S0COLORKEYLOW	0x180
+
+#define HW_PXP_S0COLORKEYHIGH	0x190
+
+#define HW_PXP_OL0		(0x200 + 0 * 0x40)
+#define HW_PXP_OL1		(0x200 + 1 * 0x40)
+#define HW_PXP_OL2		(0x200 + 2 * 0x40)
+#define HW_PXP_OL3		(0x200 + 3 * 0x40)
+#define HW_PXP_OL4		(0x200 + 4 * 0x40)
+#define HW_PXP_OL5		(0x200 + 5 * 0x40)
+#define HW_PXP_OL6		(0x200 + 6 * 0x40)
+#define HW_PXP_OL7		(0x200 + 7 * 0x40)
+
+#define HW_PXP_OLn		0x200
+
+#define HW_PXP_OL0SIZE		(0x210 + 0 * 0x40)
+#define HW_PXP_OL1SIZE		(0x210 + 1 * 0x40)
+#define HW_PXP_OL2SIZE		(0x210 + 2 * 0x40)
+#define HW_PXP_OL3SIZE		(0x210 + 3 * 0x40)
+#define HW_PXP_OL4SIZE		(0x210 + 4 * 0x40)
+#define HW_PXP_OL5SIZE		(0x210 + 5 * 0x40)
+#define HW_PXP_OL6SIZE		(0x210 + 6 * 0x40)
+#define HW_PXP_OL7SIZE		(0x210 + 7 * 0x40)
+
+#define HW_PXP_OLnSIZE		0x210
+#define BM_PXP_OLnSIZE_HEIGHT	0x000000FF
+#define BP_PXP_OLnSIZE_HEIGHT	0
+#define BM_PXP_OLnSIZE_WIDTH	0x0000FF00
+#define BP_PXP_OLnSIZE_WIDTH	8
+
+#define HW_PXP_OL0PARAM		(0x220 + 0 * 0x40)
+#define HW_PXP_OL1PARAM		(0x220 + 1 * 0x40)
+#define HW_PXP_OL2PARAM		(0x220 + 2 * 0x40)
+#define HW_PXP_OL3PARAM		(0x220 + 3 * 0x40)
+#define HW_PXP_OL4PARAM		(0x220 + 4 * 0x40)
+#define HW_PXP_OL5PARAM		(0x220 + 5 * 0x40)
+#define HW_PXP_OL6PARAM		(0x220 + 6 * 0x40)
+#define HW_PXP_OL7PARAM		(0x220 + 7 * 0x40)
+
+#define HW_PXP_OLnPARAM		0x220
+#define BM_PXP_OLnPARAM_ENABLE	0x00000001
+#define BP_PXP_OLnPARAM_ENABLE	0
+#define BM_PXP_OLnPARAM_ALPHA_CNTL	0x00000006
+#define BP_PXP_OLnPARAM_ALPHA_CNTL	1
+#define BM_PXP_OLnPARAM_ENABLE_COLORKEY	0x00000008
+#define BM_PXP_OLnPARAM_FORMAT	0x000000F0
+#define BP_PXP_OLnPARAM_FORMAT	4
+#define BM_PXP_OLnPARAM_ALPHA	0x0000FF00
+#define BP_PXP_OLnPARAM_ALPHA	8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..b8dbd6742d9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
@@ -0,0 +1,59 @@
+/*
+ * stmp378x: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS	0x8005C000
+#define REGS_RTC_SIZE	0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+#define BM_RTC_PERSISTENT1_GENERAL	0xFFFFFFFF
+#define BP_RTC_PERSISTENT1_GENERAL	0
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
index 7d7cb0bde3e..6df41762c2a 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/vmalloc.h
+ * stmp378x: SAIF register definitions
  *
- *  Copyright (C) 2000 Russell King.
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,6 +16,6 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define REGS_SAIF_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
new file mode 100644
index 00000000000..801539848c2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
@@ -0,0 +1,49 @@
+/*
+ * stmp378x: SPDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SPDIF_BASE	(STMP3XXX_REGS_BASE + 0x54000)
+#define REGS_SPDIF_PHYS	0x80054000
+#define REGS_SPDIF_SIZE	0x2000
+
+#define HW_SPDIF_CTRL		0x0
+#define BM_SPDIF_CTRL_RUN	0x00000001
+#define BP_SPDIF_CTRL_RUN	0
+#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_SPDIF_CTRL_WORD_LENGTH	0x00000010
+#define BM_SPDIF_CTRL_CLKGATE	0x40000000
+#define BM_SPDIF_CTRL_SFTRST	0x80000000
+
+#define HW_SPDIF_STAT		0x10
+
+#define HW_SPDIF_FRAMECTRL	0x20
+
+#define HW_SPDIF_SRR		0x30
+#define BM_SPDIF_SRR_RATE	0x000FFFFF
+#define BP_SPDIF_SRR_RATE	0
+#define BM_SPDIF_SRR_BASEMULT	0x70000000
+#define BP_SPDIF_SRR_BASEMULT	28
+
+#define HW_SPDIF_DEBUG		0x40
+
+#define HW_SPDIF_DATA		0x50
+
+#define HW_SPDIF_VERSION	0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..28aacf0f58e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
@@ -0,0 +1,102 @@
+/*
+ * stmp378x: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP1_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_BASE	(STMP3XXX_REGS_BASE + 0x34000)
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
new file mode 100644
index 00000000000..08343a8b556
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
@@ -0,0 +1,23 @@
+/*
+ * stmp378x: SYDMA register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SYDMA_BASE	(STMP3XXX_REGS_BASE + 0x26000)
+#define REGS_SYDMA_PHYS	0x80026000
+#define REGS_SYDMA_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..b5527957c67
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
@@ -0,0 +1,68 @@
+/*
+ * stmp378x: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+#define REGS_TIMROT_PHYS	0x80068000
+#define REGS_TIMROT_SIZE	0x2000
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_SELECT_A	0x00000007
+#define BP_TIMROT_ROTCTRL_SELECT_A	0
+#define BM_TIMROT_ROTCTRL_SELECT_B	0x00000070
+#define BP_TIMROT_ROTCTRL_SELECT_B	4
+#define BM_TIMROT_ROTCTRL_POLARITY_A	0x00000100
+#define BM_TIMROT_ROTCTRL_POLARITY_B	0x00000200
+#define BM_TIMROT_ROTCTRL_OVERSAMPLE	0x00000C00
+#define BP_TIMROT_ROTCTRL_OVERSAMPLE	10
+#define BM_TIMROT_ROTCTRL_RELATIVE	0x00001000
+#define BM_TIMROT_ROTCTRL_DIVIDER	0x003F0000
+#define BP_TIMROT_ROTCTRL_DIVIDER	16
+#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT	0x20000000
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_ROTCOUNT	0x10
+#define BM_TIMROT_ROTCOUNT_UPDOWN	0x0000FFFF
+#define BP_TIMROT_ROTCOUNT_UPDOWN	0
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
new file mode 100644
index 00000000000..7f895cb3435
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
@@ -0,0 +1,67 @@
+/*
+ * stmp378x: TVENC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_TVENC_BASE	(STMP3XXX_REGS_BASE + 0x38000)
+#define REGS_TVENC_PHYS	0x80038000
+#define REGS_TVENC_SIZE	0x2000
+
+#define HW_TVENC_CTRL		0x0
+#define BM_TVENC_CTRL_CLKGATE	0x40000000
+#define BM_TVENC_CTRL_SFTRST	0x80000000
+
+#define HW_TVENC_CONFIG		0x10
+#define BM_TVENC_CONFIG_ENCD_MODE	0x00000007
+#define BP_TVENC_CONFIG_ENCD_MODE	0
+#define BM_TVENC_CONFIG_SYNC_MODE	0x00000070
+#define BP_TVENC_CONFIG_SYNC_MODE	4
+#define BM_TVENC_CONFIG_FSYNC_PHS	0x00000200
+#define BM_TVENC_CONFIG_CGAIN	0x0000C000
+#define BP_TVENC_CONFIG_CGAIN	14
+#define BM_TVENC_CONFIG_YGAIN_SEL	0x00030000
+#define BP_TVENC_CONFIG_YGAIN_SEL	16
+#define BM_TVENC_CONFIG_PAL_SHAPE	0x00100000
+
+#define HW_TVENC_SYNCOFFSET	0x30
+
+#define HW_TVENC_COLORSUB0	0xC0
+
+#define HW_TVENC_COLORBURST	0x140
+#define BM_TVENC_COLORBURST_PBA	0x00FF0000
+#define BP_TVENC_COLORBURST_PBA	16
+#define BM_TVENC_COLORBURST_NBA	0xFF000000
+#define BP_TVENC_COLORBURST_NBA	24
+
+#define HW_TVENC_MACROVISION0	0x150
+
+#define HW_TVENC_MACROVISION1	0x160
+
+#define HW_TVENC_MACROVISION2	0x170
+
+#define HW_TVENC_MACROVISION3	0x180
+
+#define HW_TVENC_MACROVISION4	0x190
+
+#define HW_TVENC_DACCTRL	0x1A0
+#define BM_TVENC_DACCTRL_RVAL	0x00000070
+#define BP_TVENC_DACCTRL_RVAL	4
+#define BM_TVENC_DACCTRL_DUMP_TOVDD1	0x00000100
+#define BM_TVENC_DACCTRL_PWRUP1	0x00001000
+#define BM_TVENC_DACCTRL_GAINUP	0x00040000
+#define BM_TVENC_DACCTRL_GAINDN	0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..a251e68bb3a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP1_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP2_BASE	(STMP3XXX_REGS_BASE + 0x6E000)
+#define REGS_UARTAPP2_PHYS	0x8006E000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
new file mode 100644
index 00000000000..25112c1aa60
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: USBCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
+#define REGS_USBCTRL_SIZE	0x2000
+
+#define HW_USBCTRL_USBCMD	0x140
+#define BM_USBCTRL_USBCMD_RS	0x00000001
+#define BP_USBCTRL_USBCMD_RS	0
+#define BM_USBCTRL_USBCMD_RST	0x00000002
+
+#define HW_USBCTRL_USBINTR	0x148
+#define BM_USBCTRL_USBINTR_UE	0x00000001
+#define BP_USBCTRL_USBINTR_UE	0
+
+#define HW_USBCTRL_PORTSC1	0x184
+#define BM_USBCTRL_PORTSC1_PHCD	0x00800000
+
+#define HW_USBCTRL_OTGSC	0x1A4
+#define BM_USBCTRL_OTGSC_ID	0x00000100
+#define BM_USBCTRL_OTGSC_IDIS	0x00010000
+#define BM_USBCTRL_OTGSC_IDIE	0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..11f3b732dc9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp378x: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+#define REGS_USBPHY_PHYS	0x8007C000
+#define REGS_USBPHY_SIZE	0x2000
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
new file mode 100644
index 00000000000..ddd49a760fd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.c
@@ -0,0 +1,299 @@
+/*
+ * Freescale STMP378X platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/dma.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-pxp.h>
+#include <mach/regs-i2c.h>
+
+#include "stmp378x.h"
+/*
+ * IRQ handling
+ */
+static void stmp378x_ack_irq(unsigned int irq)
+{
+	/* Tell ICOLL to release IRQ line */
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* ACK current interrupt */
+	__raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
+			REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp378x_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
+			REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static void stmp378x_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
+		      REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static struct irq_chip stmp378x_chip = {
+	.ack	= stmp378x_ack_irq,
+	.mask	= stmp378x_mask_irq,
+	.unmask = stmp378x_unmask_irq,
+};
+
+void __init stmp378x_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp378x_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c0;
+	u32 mask;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
+		mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
+		mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
+		break;
+	default:
+		return;
+	}
+
+	/* Reset channel and wait for it to complete */
+	stmp3xxx_setl(mask, c0);
+	while (__raw_readl(c0) & mask)
+		cpu_relax();
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+
+static struct map_desc stmp378x_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= STMP3XXX_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+/*
+ * devices that are present only on stmp378x, not on all 3xxx boards:
+ * 	PxP
+ * 	I2C
+ */
+static struct resource pxp_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_PXP_PHYS,
+		.end	= REGS_PXP_PHYS + REGS_PXP_SIZE,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_PXP,
+		.end	= IRQ_PXP,
+	},
+};
+
+struct platform_device stmp378x_pxp = {
+	.name		= "stmp3xxx-pxp",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxp_resource),
+	.resource	= pxp_resource,
+};
+
+static struct resource i2c_resources[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_I2C_ERROR,
+		.end = IRQ_I2C_ERROR,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = REGS_I2C_PHYS,
+		.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+	},
+};
+
+struct platform_device stmp378x_i2c = {
+	.name = "i2c_stmp3xxx",
+	.id = 0,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = i2c_resources,
+	.num_resources = ARRAY_SIZE(i2c_resources),
+};
+
+void __init stmp378x_map_io(void)
+{
+	iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
+}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
new file mode 100644
index 00000000000..0dc15b3c891
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.h
@@ -0,0 +1,25 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP378X_H
+#define __MACH_STMP378X_H
+
+void stmp378x_map_io(void);
+void stmp378x_init_irq(void);
+
+extern struct platform_device stmp378x_pxp, stmp378x_i2c;
+#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
new file mode 100644
index 00000000000..90d8fe6f10f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -0,0 +1,334 @@
+/*
+ * Freescale STMP378X development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/mmc.h>
+#include <mach/gpmi.h>
+
+#include "stmp378x.h"
+
+static struct platform_device *devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+	&stmp3xxx_watchdog,
+	&stmp3xxx_touchscreen,
+	&stmp3xxx_rtc,
+	&stmp3xxx_keyboard,
+	&stmp3xxx_framebuffer,
+	&stmp3xxx_backlight,
+	&stmp3xxx_rotdec,
+	&stmp3xxx_persistent,
+	&stmp3xxx_dcp_bootstream,
+	&stmp3xxx_dcp,
+	&stmp3xxx_battery,
+	&stmp378x_pxp,
+	&stmp378x_i2c,
+};
+
+static struct pin_desc i2c_pins_desc[] = {
+	{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group i2c_pins = {
+	.pins		= i2c_pins_desc,
+	.nr_pins	= ARRAY_SIZE(i2c_pins_desc),
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+static struct pin_desc appuart_pins_0[] = {
+	{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_desc appuart_pins_1[] = {
+#if 0 /* enable these when second appuart will be connected */
+	{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+#endif
+};
+
+static struct pin_desc mmc_pins_desc[] = {
+	{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+	{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group mmc_pins = {
+	.pins		= mmc_pins_desc,
+	.nr_pins	= ARRAY_SIZE(mmc_pins_desc),
+};
+
+static int stmp3xxxmmc_get_wp(void)
+{
+	return gpio_get_value(PINID_PWM4);
+}
+
+static int stmp3xxxmmc_hw_init_ssp1(void)
+{
+	int ret;
+
+	ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
+	if (ret)
+		goto out;
+
+	/* Configure write protect GPIO pin */
+	ret = gpio_request(PINID_PWM4, "mmc wp");
+	if (ret)
+		goto out_wp;
+
+	gpio_direction_input(PINID_PWM4);
+
+	/* Configure POWER pin as gpio to drive power to MMC slot */
+	ret = gpio_request(PINID_PWM3, "mmc power");
+	if (ret)
+		goto out_power;
+
+	gpio_direction_output(PINID_PWM3, 0);
+	mdelay(100);
+
+	return 0;
+
+out_power:
+	gpio_free(PINID_PWM4);
+out_wp:
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+out:
+	return ret;
+}
+
+static void stmp3xxxmmc_hw_release_ssp1(void)
+{
+	gpio_free(PINID_PWM3);
+	gpio_free(PINID_PWM4);
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+}
+
+static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
+{
+	stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
+}
+
+static unsigned long
+stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
+{
+	struct clk *ssp, *parent;
+	char *p;
+	long r;
+
+	ssp = clk_get(NULL, "ssp");
+
+	/* using SSP1, no timeout, clock rate 1 */
+	writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
+	       BF(0xFFFF, SSP_TIMING_TIMEOUT),
+	       base + HW_SSP_TIMING);
+
+	p = (hz > 1000000) ? "io" : "osc_24M";
+	parent = clk_get(NULL, p);
+	clk_set_parent(ssp, parent);
+	r = clk_set_rate(ssp, 2 * hz / 1000);
+	clk_put(parent);
+	clk_put(ssp);
+
+	return hz;
+}
+
+static struct stmp3xxxmmc_platform_data mmc_data = {
+	.hw_init	= stmp3xxxmmc_hw_init_ssp1,
+	.hw_release	= stmp3xxxmmc_hw_release_ssp1,
+	.get_wp		= stmp3xxxmmc_get_wp,
+	.cmd_pullup	= stmp3xxxmmc_cmd_pullup_ssp1,
+	.setclock	= stmp3xxxmmc_setclock_ssp1,
+};
+
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	[1] = {
+		.pins		= appuart_pins_1,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_1),
+	},
+};
+
+static struct pin_desc ssp1_pins_desc[] = {
+	{ PINID_SSP1_SCK,	PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_CMD,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA0,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA3,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_desc ssp2_pins_desc[] = {
+	{ PINID_GPMI_WRN,	PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_RDY1,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D00,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D03,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_group ssp1_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
+};
+
+static struct pin_group ssp2_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
+};
+
+static struct pin_desc gpmi_pins_desc[] = {
+	{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group gpmi_pins = {
+	.pins		= gpmi_pins_desc,
+	.nr_pins	= ARRAY_SIZE(gpmi_pins_desc),
+};
+
+static struct mtd_partition gpmi_partitions[] = {
+	[0] = {
+		.name	= "boot",
+		.size	= 10 * SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "data",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct gpmi_platform_data gpmi_data = {
+	.pins = &gpmi_pins,
+	.nr_parts = ARRAY_SIZE(gpmi_partitions),
+	.parts = gpmi_partitions,
+	.part_types = { "cmdline", NULL },
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias       = "enc28j60",
+		.max_speed_hz   = 6 * 1000 * 1000,
+		.bus_num	= 1,
+		.chip_select    = 0,
+		.platform_data  = NULL,
+	},
+#endif
+};
+
+static void __init stmp378x_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* init stmp3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+	stmp3xxx_mmc.dev.platform_data = &mmc_data;
+	stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
+	stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
+	stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
+	stmp378x_i2c.dev.platform_data = &i2c_pins;
+
+	/* register spi devices */
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	/* add board's devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* add devices selected by command line ssp1= and ssp2= options */
+	stmp3xxx_ssp1_device_register();
+	stmp3xxx_ssp2_device_register();
+}
+
+MACHINE_START(STMP378X, "STMP378X")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp378x_map_io,
+	.init_irq	= stmp378x_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp378x_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile
new file mode 100644
index 00000000000..57deffd09fb
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
+obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..fed2787b6c3
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP37XX
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x30]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x3f
+		movne	\irqstat, #0		@ Ack this IRQ
+		strne	\irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h
new file mode 100644
index 00000000000..98f12938550
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h
@@ -0,0 +1,99 @@
+/*
+ * Freescale STMP37XX interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef _ASM_ARCH_IRQS_H
+#define _ASM_ARCH_IRQS_H
+
+#define IRQ_DEBUG_UART	         0
+#define IRQ_COMMS_RX	           1
+#define IRQ_COMMS_TX	           1
+#define IRQ_SSP2_ERROR	         2
+#define IRQ_VDD5V	              3
+#define IRQ_HEADPHONE_SHORT	    4
+#define IRQ_DAC_DMA	            5
+#define IRQ_DAC_ERROR	          6
+#define IRQ_ADC_DMA	            7
+#define IRQ_ADC_ERROR	          8
+#define IRQ_SPDIF_DMA	          9
+#define IRQ_SAIF2_DMA	          9
+#define IRQ_SPDIF_ERROR	        10
+#define IRQ_SAIF1_IRQ	          10
+#define IRQ_SAIF2_IRQ	          10
+#define IRQ_USB_CTRL	           11
+#define IRQ_USB_WAKEUP	         12
+#define IRQ_GPMI_DMA	           13
+#define IRQ_SSP1_DMA	           14
+#define IRQ_SSP_ERROR	          15
+#define IRQ_GPIO0	              16
+#define IRQ_GPIO1	              17
+#define IRQ_GPIO2	              18
+#define IRQ_SAIF1_DMA	          19
+#define IRQ_SSP2_DMA	           20
+#define IRQ_ECC8_IRQ	           21
+#define IRQ_RTC_ALARM	          22
+#define IRQ_UARTAPP_TX_DMA	     23
+#define IRQ_UARTAPP_INTERNAL	   24
+#define IRQ_UARTAPP_RX_DMA	     25
+#define IRQ_I2C_DMA	            26
+#define IRQ_I2C_ERROR	          27
+#define IRQ_TIMER0	             28
+#define IRQ_TIMER1	             29
+#define IRQ_TIMER2	             30
+#define IRQ_TIMER3	             31
+#define IRQ_BATT_BRNOUT	        32
+#define IRQ_VDDD_BRNOUT	        33
+#define IRQ_VDDIO_BRNOUT	       34
+#define IRQ_VDD18_BRNOUT	       35
+#define IRQ_TOUCH_DETECT	       36
+#define IRQ_LRADC_CH0	          37
+#define IRQ_LRADC_CH1	          38
+#define IRQ_LRADC_CH2	          39
+#define IRQ_LRADC_CH3	          40
+#define IRQ_LRADC_CH4	          41
+#define IRQ_LRADC_CH5	          42
+#define IRQ_LRADC_CH6	          43
+#define IRQ_LRADC_CH7	          44
+#define IRQ_LCDIF_DMA	          45
+#define IRQ_LCDIF_ERROR	        46
+#define IRQ_DIGCTL_DEBUG_TRAP	  47
+#define IRQ_RTC_1MSEC	          48
+#define IRQ_DRI_DMA	            49
+#define IRQ_DRI_ATTENTION	      50
+#define IRQ_GPMI_ATTENTION	     51
+#define IRQ_IR	                 52
+#define IRQ_DCP_VMI	            53
+#define IRQ_DCP	                54
+#define IRQ_RESERVED_55	        55
+#define IRQ_RESERVED_56	        56
+#define IRQ_RESERVED_57	        57
+#define IRQ_RESERVED_58	        58
+#define IRQ_RESERVED_59	        59
+#define SW_IRQ_60	              60
+#define SW_IRQ_61	              61
+#define SW_IRQ_62	              62
+#define SW_IRQ_63	              63
+
+#define NR_REAL_IRQS		64
+#define NR_IRQS			(NR_REAL_IRQS + 32 * 3)
+
+/* TIMER and BRNOUT are FIQ capable */
+#define FIQ_START			IRQ_TIMER0
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
+
+#endif /* _ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h
new file mode 100644
index 00000000000..d56de0c471d
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/pins.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale STMP37XX SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_A0		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_A1		STMP3XXX_PINID(0, 17)
+#define PINID_GPMI_A2		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RESETN	STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_IRQ		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_UART2_CTS		STMP3XXX_PINID(0, 26)
+#define PINID_UART2_RTS		STMP3XXX_PINID(0, 27)
+#define PINID_UART2_RX		STMP3XXX_PINID(0, 28)
+#define PINID_UART2_TX		STMP3XXX_PINID(0, 29)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_RESET 	STMP3XXX_PINID(1, 16)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_WR_RWN	STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RD_E		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_BUSY		STMP3XXX_PINID(1, 21)
+#define PINID_SSP1_CMD		STMP3XXX_PINID(1, 22)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(1, 23)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(1, 24)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(1, 25)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(1, 26)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(1, 27)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(1, 28)
+
+/* Bank 2 */
+#define PINID_PWM0		STMP3XXX_PINID(2, 0)
+#define PINID_PWM1		STMP3XXX_PINID(2, 1)
+#define PINID_PWM2		STMP3XXX_PINID(2, 2)
+#define PINID_PWM3		STMP3XXX_PINID(2, 3)
+#define PINID_PWM4		STMP3XXX_PINID(2, 4)
+#define PINID_I2C_SCL		STMP3XXX_PINID(2, 5)
+#define PINID_I2C_SDA		STMP3XXX_PINID(2, 6)
+#define PINID_ROTTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_CE2N		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_CE3N		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 26)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 27)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_A13		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_A14		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..a323aa9a21f
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_DEVSEL		0x20
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BM_APBH_CHn_CMD_MODE		0x00000003
+#define BP_APBH_CHn_CMD_MODE		0x00000001
+#define BV_APBH_CHn_CMD_MODE_NOOP		 0
+#define BV_APBH_CHn_CMD_MODE_WRITE		 1
+#define BV_APBH_CHn_CMD_MODE_READ		 2
+#define BV_APBH_CHn_CMD_MODE_SENSE		 3
+#define BM_APBH_CHn_CMD_CHAIN		0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..6d080cd5b70
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
@@ -0,0 +1,113 @@
+/*
+ * stmp37xx: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBX_CTRL0_RESET_CHANNEL	16
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_DEVSEL		0x20
+
+#define HW_APBX_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x50
+#define BM_APBX_CHn_CMD_MODE		0x00000003
+#define BP_APBX_CHn_CMD_MODE		0x00000001
+#define BV_APBX_CHn_CMD_MODE_NOOP		 0
+#define BV_APBX_CHn_CMD_MODE_WRITE		 1
+#define BV_APBX_CHn_CMD_MODE_READ		 2
+#define BV_APBX_CHn_CMD_MODE_SENSE		 3
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x70 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x70 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x70 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x70 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x70 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x70 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x70 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x70 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x70 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x70 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x70 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x70 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x70 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x70 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x70 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x70 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x70
+
+#define HW_APBX_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x80
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..3b511f947a5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
@@ -0,0 +1,61 @@
+/*
+ * stmp37xx: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..ca1942b8a3e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
@@ -0,0 +1,111 @@
+/*
+ * stmp37xx: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_LINEOUT	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_LINEOUTCTRL	0x100
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0x0000001F
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	0x00001F00
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	8
+#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	0x00007000
+#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	12
+#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	0x00F00000
+#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	20
+#define BM_AUDIOOUT_LINEOUTCTRL_MUTE	0x01000000
+#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..47f5c92fdaf
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
@@ -0,0 +1,72 @@
+/*
+ * stmp37xx: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00007FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_FRAC		0xD0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_CLKSEQ	0xE0
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0xF0
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..ba1bbe265c2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
@@ -0,0 +1,24 @@
+/*
+ * stmp37xx: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..3b6d990a3af
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..f2b304f5449
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
@@ -0,0 +1,63 @@
+/*
+ * stmp37xx: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000003
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_DSAMPLE_TIME	0x00007000
+#define BP_GPMI_CTRL1_DSAMPLE_TIME	12
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..35882a9b8bc
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp37xx: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..3b7c92239e2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
@@ -0,0 +1,43 @@
+/*
+ * stmp37xx: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x30
+
+#define HW_ICOLL_PRIORITY0	(0x60 + 0 * 0x10)
+#define HW_ICOLL_PRIORITY1	(0x60 + 1 * 0x10)
+#define HW_ICOLL_PRIORITY2	(0x60 + 2 * 0x10)
+#define HW_ICOLL_PRIORITY3	(0x60 + 3 * 0x10)
+
+#define HW_ICOLL_PRIORITYn	0x60
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..72514e8b073
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
@@ -0,0 +1,89 @@
+/*
+ * stmp37xx: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_COUNT	0x0000FFFF
+#define BP_LCDIF_CTRL_COUNT	0
+#define BM_LCDIF_CTRL_RUN	0x00010000
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00020000
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00040000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00080000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00100000
+#define BM_LCDIF_CTRL_DATA_SWIZZLE	0x00600000
+#define BP_LCDIF_CTRL_DATA_SWIZZLE	21
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00800000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x06000000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	25
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x08000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x10000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+
+#define HW_LCDIF_TIMING		0x20
+
+#define HW_LCDIF_VDCTRL0	0x30
+#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT	0x000003FF
+#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x40
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0x000FFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	0xFFF00000
+#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	20
+
+#define HW_LCDIF_VDCTRL2	0x50
+#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT	0x000007FF
+#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x007FF800
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	11
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF800000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	23
+
+#define HW_LCDIF_VDCTRL3	0x60
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x000001FF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x00FFF000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	12
+#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON	0x01000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cc7b4702d1c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..d5efce2388c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp37xx: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x300
+#define HW_PINCTRL_PULL1	0x310
+#define HW_PINCTRL_PULL2	0x320
+#define HW_PINCTRL_PULL3	0x330
+
+#define HW_PINCTRL_DOUT0	0x400
+#define HW_PINCTRL_DOUT1	0x410
+#define HW_PINCTRL_DOUT2	0x420
+
+#define HW_PINCTRL_DIN0		0x500
+#define HW_PINCTRL_DIN1		0x510
+#define HW_PINCTRL_DIN2		0x520
+
+#define HW_PINCTRL_DOE0		0x600
+#define HW_PINCTRL_DOE1		0x610
+#define HW_PINCTRL_DOE2		0x620
+
+#define HW_PINCTRL_PIN2IRQ0	0x700
+#define HW_PINCTRL_PIN2IRQ1	0x710
+#define HW_PINCTRL_PIN2IRQ2	0x720
+
+#define HW_PINCTRL_IRQEN0	0x800
+#define HW_PINCTRL_IRQEN1	0x810
+#define HW_PINCTRL_IRQEN2	0x820
+
+#define HW_PINCTRL_IRQLEVEL0	0x900
+#define HW_PINCTRL_IRQLEVEL1	0x910
+#define HW_PINCTRL_IRQLEVEL2	0x920
+
+#define HW_PINCTRL_IRQPOL0	0xA00
+#define HW_PINCTRL_IRQPOL1	0xA10
+#define HW_PINCTRL_IRQPOL2	0xA20
+
+#define HW_PINCTRL_IRQSTAT0	0xB00
+#define HW_PINCTRL_IRQSTAT1	0xB10
+#define HW_PINCTRL_IRQSTAT2	0xB20
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
new file mode 100644
index 00000000000..0e733d74a22
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
@@ -0,0 +1,56 @@
+/*
+ * stmp37xx: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xB0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000100
+
+#define HW_POWER_RESET		0xE0
+
+#define HW_POWER_DEBUG		0xF0
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..15966a1b62e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
@@ -0,0 +1,51 @@
+/*
+ * stmp37xx: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..fac40edc38a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
@@ -0,0 +1,57 @@
+/*
+ * stmp37xx: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS   0x8005C000
+#define REGS_RTC_SIZE   0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..cbde891a06c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
@@ -0,0 +1,101 @@
+/*
+ * stmp37xx: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..4af0f6edfa7
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
@@ -0,0 +1,49 @@
+/*
+ * stmp37xx: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..0594275d860
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
@@ -0,0 +1,85 @@
+/*
+ * stmp37xx: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
index 9e197ae4590..9145e22df32 100644
--- a/arch/arm/mach-imx/include/mach/io.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imxads/include/mach/io.h
+ * stmp37xx: USBCTL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,14 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
+#define REGS_USBCTL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTL_PHYS	0x80000
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
index a93df7cba69..1a2ae9cbdfe 100644
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
@@ -1,8 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/memory.h
+ * stmp37xx: USBCTRL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,11 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-#endif
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..b7fce0fbc56
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT	0x00000001
+#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT	0
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c
new file mode 100644
index 00000000000..8c7d6fb191a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.c
@@ -0,0 +1,219 @@
+/*
+ * Freescale STMP37XX platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/dma.h>
+
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include "stmp37xx.h"
+
+/*
+ * IRQ handling
+ */
+static void stmp37xx_ack_irq(unsigned int irq)
+{
+	/* Disable IRQ */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+
+	/* ACK current interrupt */
+	__raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp37xx_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static void stmp37xx_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static struct irq_chip stmp37xx_chip = {
+	.ack	= stmp37xx_ack_irq,
+	.mask	= stmp37xx_mask_irq,
+	.unmask = stmp37xx_unmask_irq,
+};
+
+void __init stmp37xx_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp37xx_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		/* Reset channel and wait for it to complete */
+		stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+		while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
+		       (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+		while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
+		       (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+static struct map_desc stmp37xx_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init stmp37xx_map_io(void)
+{
+	iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
+}
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h
new file mode 100644
index 00000000000..0b75fb796a6
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP37XX_H
+#define __MACH_STMP37XX_H
+
+void stmp37xx_map_io(void);
+void stmp37xx_init_irq(void);
+
+#endif /* __MACH_STMP37XX_H */
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
new file mode 100644
index 00000000000..394f21ab59e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -0,0 +1,101 @@
+/*
+ * Freescale STMP37XX development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include "stmp37xx.h"
+
+/*
+ * List of STMP37xx development board specific devices
+ */
+static struct platform_device *stmp37xx_devb_devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+struct pin_desc appuart_pins_0[] = {
+	{ PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	/* 37xx has the only app uart */
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+
+static void __init stmp37xx_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* Init STMP3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+
+	/* Add STMP37xx development board devices */
+	platform_add_devices(stmp37xx_devb_devices,
+			ARRAY_SIZE(stmp37xx_devb_devices));
+}
+
+MACHINE_START(STMP37XX, "STMP37XX")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp37xx_map_io,
+	.init_irq	= stmp37xx_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp37xx_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
new file mode 100644
index 00000000000..337b9aabce4
--- /dev/null
+++ b/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,105 @@
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+
+comment "ST-Ericsson Mobile Platform Products"
+
+config MACH_U300
+	bool "U300"
+
+comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
+
+choice
+	prompt "U300/U330/U335/U365 system type"
+	default MACH_U300_BS2X
+	---help---
+	You need to select the target system, i.e. the
+	U300/U330/U335/U365 board that you want to compile your kernel
+	for.
+
+config MACH_U300_BS2X
+	bool "S26/S26/B25/B26 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S26/S25 test products. (Also works on
+		B26/B25 big boards.)
+
+config MACH_U300_BS330
+	bool "S330/B330 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S330/B330 test products.
+
+config MACH_U300_BS335
+	bool "S335/B335 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S335/B335 test products.
+
+config MACH_U300_BS365
+	bool "S365/B365 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S365/B365 test products.
+
+endchoice
+
+choice
+	prompt "Memory configuration"
+	default MACH_U300_SINGLE_RAM
+	---help---
+	You have to config the kernel according to the physical memory
+	configuration.
+
+config MACH_U300_SINGLE_RAM
+	bool "Single RAM"
+	help
+		Select this if you want support for Single RAM phones.
+
+config MACH_U300_DUAL_RAM
+	bool "Dual RAM"
+	help
+		Select this if you want support for Dual RAM phones.
+		This is two RAM memorys on different EMIFs.
+endchoice
+
+config U300_DEBUG
+	bool "Debug support for U300"
+	depends on PM
+	help
+		Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SEMI_IS_SHARED
+	bool "The SEMI is used by both the access and application side"
+	depends on MACH_U300
+	help
+		This makes it possible to use the SEMI (Shared External
+		Memory Interface) from both from access and application
+		side.
+
+comment "All the settings below must match the bootloader's settings"
+
+config MACH_U300_ACCESS_MEM_SIZE
+       int "Access CPU memory allocation"
+       range 7 25
+       depends on MACH_U300_SINGLE_RAM
+       default 13
+       help
+		How much memory in MiB that the Access side CPU has allocated
+
+config MACH_U300_2MB_ALIGNMENT_FIX
+       bool "2MiB alignment fix"
+       depends on MACH_U300_SINGLE_RAM
+       default y
+       help
+		If yes and the Access side CPU has allocated an odd size in
+		MiB, this fix gives you one MiB extra that would otherwise be
+		lost due to Linux 2 MiB alignment policy.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
new file mode 100644
index 00000000000..24950e0df4b
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y		:= core.o clock.o timer.o gpio.o padmux.o
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+obj-$(CONFIG_ARCH_U300)	          += u300.o
+obj-$(CONFIG_MMC)                 += mmc.o
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 00000000000..6fbfc6ea2d3
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,15 @@
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+ifdef CONFIG_MACH_U300_SINGLE_RAM
+     zreladdr-y	:= 0x28E08000
+  params_phys-y	:= 0x28E00100
+else
+     zreladdr-y	:= 0x48008000
+  params_phys-y	:= 0x48000100
+endif
+
+# This isn't used.
+#initrd_phys-y	:= 0x29800000
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
new file mode 100644
index 00000000000..5cd04d6751b
--- /dev/null
+++ b/arch/arm/mach-u300/clock.c
@@ -0,0 +1,1487 @@
+/*
+ *
+ * arch/arm/mach-u300/clock.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Define clocks in the app platform.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+
+/*
+ * TODO:
+ * - move all handling of the CCR register into this file and create
+ *   a spinlock for the CCR register
+ * - switch to the clkdevice lookup mechanism that maps clocks to
+ *   device ID:s instead when it becomes available in kernel 2.6.29.
+ * - implement rate get/set for all clocks that need it.
+ */
+
+/*
+ * Syscon clock I/O registers lock so clock requests don't collide
+ * NOTE: this is a local lock only used to lock access to clock and
+ * reset registers in syscon.
+ */
+static DEFINE_SPINLOCK(syscon_clkreg_lock);
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ *  AMBA bus
+ *  |
+ *  +- CPU
+ *  +- NANDIF NAND Flash interface
+ *  +- SEMI Shared Memory interface
+ *  +- ISP Image Signal Processor (U335 only)
+ *  +- CDS (U335 only)
+ *  +- DMA Direct Memory Access Controller
+ *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ *  +- APEX
+ *  +- VIDEO_ENC AVE2/3 Video Encoder
+ *  +- XGAM Graphics Accelerator Controller
+ *  +- AHB
+ *  |
+ *  +- ahb:0 AHB Bridge
+ *  |  |
+ *  |  +- ahb:1 INTCON Interrupt controller
+ *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
+ *  |  +- ahb:4 EMIF   External Memory interface
+ *  |
+ *  +- fast:0 FAST bridge
+ *  |  |
+ *  |  +- fast:1 MMCSD MMC/SD card reader controller
+ *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
+ *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
+ *  |  +- fast:4 I2C0  I2C channel 0 controller
+ *  |  +- fast:5 I2C1  I2C channel 1 controller
+ *  |  +- fast:6 SPI   SPI controller
+ *  |  +- fast:7 UART1 Secondary UART (U335 only)
+ *  |
+ *  +- slow:0 SLOW bridge
+ *     |
+ *     +- slow:1 SYSCON (not possible to control)
+ *     +- slow:2 WDOG Watchdog
+ *     +- slow:3 UART0 primary UART
+ *     +- slow:4 TIMER_APP Application timer - used in Linux
+ *     +- slow:5 KEYPAD controller
+ *     +- slow:6 GPIO controller
+ *     +- slow:7 RTC controller
+ *     +- slow:8 BT Bus Tracer (not used currently)
+ *     +- slow:9 EH Event Handler (not used currently)
+ *     +- slow:a TIMER_ACC Access style timer (not used currently)
+ *     +- slow:b PPM (U335 only, what is that?)
+ */
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val |= clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val &= ~clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = false;
+}
+
+int __clk_get(struct clk *clk)
+{
+	u16 val;
+
+	/* The MMC and MSPRO clocks need some special set-up */
+	if (!strcmp(clk->name, "MCLK")) {
+		/* Set default MMC clock divisor to 18.9 MHz */
+		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Disable MSPRO frequency */
+		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	if (!strcmp(clk->name, "MSPRO")) {
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Enable MSPRO frequency */
+		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+static void syscon_clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void syscon_clk_enable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static u16 syscon_clk_get_rate(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+	return val;
+}
+
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+static void enable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S0 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void enable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S1 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S0 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S1 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
+
+
+static void syscon_clk_rate_set_mclk(unsigned long rate)
+{
+	u16 val;
+	u32 reg;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 18900000:
+		val = 0x0054;
+		break;
+	case 20800000:
+		val = 0x0044;
+		break;
+	case 23100000:
+		val = 0x0043;
+		break;
+	case 26000000:
+		val = 0x0033;
+		break;
+	case 29700000:
+		val = 0x0032;
+		break;
+	case 34700000:
+		val = 0x0022;
+		break;
+	case 41600000:
+		val = 0x0021;
+		break;
+	case 52000000:
+		val = 0x0011;
+		break;
+	case 104000000:
+		val = 0x0000;
+		break;
+	default:
+		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
+		       rate);
+		return;
+	}
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+		~U300_SYSCON_MMF0R_MASK;
+	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+void syscon_clk_rate_set_cpuclk(unsigned long rate)
+{
+	u16 val;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 13000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+		break;
+	case 52000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+		break;
+	case 104000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+		break;
+	case 208000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+		break;
+	default:
+		return;
+	}
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
+		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		/* some blocks lack clocking registers and cannot be disabled */
+		if (clk->disable)
+			clk->disable(clk);
+		if (likely((u32)clk->parent))
+			clk_disable(clk->parent);
+	}
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+	if (unlikely(!strcmp(clk->name, "I2S0")))
+		disable_i2s0_vcxo();
+	if (unlikely(!strcmp(clk->name, "I2S1")))
+		disable_i2s1_vcxo();
+#endif
+	spin_unlock_irqrestore(&clk->lock, iflags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount++ == 0) {
+		if (likely((u32)clk->parent))
+			ret = clk_enable(clk->parent);
+
+		if (unlikely(ret != 0))
+			clk->usecount--;
+		else {
+			/* remove reset line (we never enable reset again) */
+			syscon_block_reset_disable(clk);
+			/* clocks without enable function are always on */
+			if (clk->enable)
+				clk->enable(clk);
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+			if (unlikely(!strcmp(clk->name, "I2S0")))
+				enable_i2s0_vcxo();
+			if (unlikely(!strcmp(clk->name, "I2S1")))
+				enable_i2s1_vcxo();
+#endif
+		}
+	}
+	spin_unlock_irqrestore(&clk->lock, iflags);
+	return ret;
+
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* Returns the clock rate in Hz */
+static unsigned long clk_get_rate_cpuclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+		return 104000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 208000000;
+	default:
+		break;
+	}
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_emif_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 104000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_xgamclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_mclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		/*
+		 * Here, the 208 MHz PLL gets shut down and the always
+		 * on 13 MHz PLL used for RTC etc kicks into use
+		 * instead.
+		 */
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+	{
+		/*
+		 * This clock is under program control. The register is
+		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
+		 * high, bit 3-0 gives cycles-1 to count low. Distribute
+		 * these with no more than 1 cycle difference between
+		 * low and high and add low and high to get the actual
+		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
+		 * divide by 1 and 1 so the highest frequency possible
+		 * is 104 MHz.
+		 *
+		 * e.g. 0x54 =>
+		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+		 */
+		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+			U300_SYSCON_MMF0R_MASK;
+		switch (val) {
+		case 0x0054:
+			return 18900000;
+		case 0x0044:
+			return 20800000;
+		case 0x0043:
+			return 23100000;
+		case 0x0033:
+			return 26000000;
+		case 0x0032:
+			return 29700000;
+		case 0x0022:
+			return 34700000;
+		case 0x0021:
+			return 41600000;
+		case 0x0011:
+			return 52000000;
+		case 0x0000:
+			return 104000000;
+		default:
+			break;
+		}
+	}
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 26000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+	else
+		return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 18900000)
+		return 18900000;
+	if (rate >= 20800000)
+		return 20800000;
+	if (rate >= 23100000)
+		return 23100000;
+	if (rate >= 26000000)
+		return 26000000;
+	if (rate >= 29700000)
+		return 29700000;
+	if (rate >= 34700000)
+		return 34700000;
+	if (rate >= 41600000)
+		return 41600000;
+	if (rate >= 52000000)
+		return 52000000;
+	return -EINVAL;
+}
+
+static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 13000000)
+		return 13000000;
+	if (rate >= 52000000)
+		return 52000000;
+	if (rate >= 104000000)
+		return 104000000;
+	if (rate >= 208000000)
+		return 208000000;
+	return -EINVAL;
+}
+
+/*
+ * This adjusts a requested rate to the closest exact rate
+ * a certain clock can provide. For a fixed clock it's
+ * mostly clk->rate.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+	/* Else default to fixed value */
+
+	if (clk->round_rate) {
+		return (long) clk->round_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to round rate of %s\n",
+		       clk->name);
+	}
+	return (long) clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: set for EMIFCLK and AHBCLK */
+	/* Else assume the clock is fixed and fail */
+	if (clk->set_rate) {
+		return clk->set_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
+		       clk->name, rate);
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * Clock definitions. The clock parents are set to respective
+ * bridge and the clock framework makes sure that the clocks have
+ * parents activated and are brought out of reset when in use.
+ *
+ * Clocks that have hw_ctrld = true are hw controlled, and the hw
+ * can by itself turn these clocks on and off.
+ * So in other words, we don't really have to care about them.
+ */
+
+static struct clk amba_clk = {
+	.name	    = "AMBA",
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+};
+
+/*
+ * These blocks are connected directly to the AMBA bus
+ * with no bridge.
+ */
+
+static struct clk cpu_clk = {
+	.name	    = "CPU",
+	.parent	    = &amba_clk,
+	.rate	    = 208000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
+	.set_rate   = clk_set_rate_cpuclk,
+	.get_rate   = clk_get_rate_cpuclk,
+	.round_rate = clk_round_rate_cpuclk,
+};
+
+static struct clk nandif_clk = {
+	.name       = "NANDIF",
+	.parent	    = &amba_clk,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk semi_clk = {
+	.name       = "SEMI",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	/* It is not possible to reset SEMI */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk isp_clk = {
+	.name	    = "ISP",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk cds_clk = {
+	.name	    = "CDS",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+static struct clk dma_clk = {
+	.name       = "DMA",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk aaif_clk = {
+	.name       = "AAIF",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk apex_clk = {
+	.name       = "APEX",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk video_enc_clk = {
+	.name       = "VIDEO_ENC",
+	.parent	    = &amba_clk,
+	.rate       = 208000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	/* This has XGAM in the name but refers to the video encoder */
+	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk xgam_clk = {
+	.name       = "XGAMCLK",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
+	.get_rate   = clk_get_rate_xgamclk,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* This clock is used to activate the video encoder */
+static struct clk ahb_clk = {
+	.name	    = "AHB",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false, /* This one is set to false due to HW bug */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+
+/*
+ * Clocks on the AHB bridge
+ */
+
+static struct clk ahb_subsys_clk = {
+	.name	    = "AHB_SUBSYS",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+static struct clk intcon_clk = {
+	.name	    = "INTCON",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
+	/* INTCON can be reset but not clock-gated */
+};
+
+static struct clk mspro_clk = {
+	.name       = "MSPRO",
+	.parent	    = &ahb_subsys_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk emif_clk = {
+	.name	    = "EMIF",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 104000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_emif_clk,
+};
+
+
+/*
+ * Clocks on the FAST bridge
+ */
+static struct clk fast_clk = {
+	.name	    = "FAST_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk mmcsd_clk = {
+	.name       = "MCLK",
+	.parent	    = &fast_clk,
+	.rate       = 18900000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
+	.get_rate   = clk_get_rate_mclk,
+	.set_rate   = clk_set_rate_mclk,
+	.round_rate = clk_round_rate_mclk,
+	.disable    = syscon_clk_disable,
+	.enable     = syscon_clk_enable,
+};
+
+static struct clk i2s0_clk = {
+	.name       = "i2s0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2s1_clk = {
+	.name       = "i2s1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c0_clk = {
+	.name       = "I2C0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c1_clk = {
+	.name       = "I2C1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk spi_clk = {
+	.name       = "SPI",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk uart1_clk = {
+	.name	    = "UART1",
+	.parent	    = &fast_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+
+/*
+ * Clocks on the SLOW bridge
+ */
+static struct clk slow_clk = {
+	.name	    = "SLOW_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* TODO: implement SYSCON clock? */
+
+static struct clk wdog_clk = {
+	.name	    = "WDOG",
+	.parent	    = &slow_clk,
+	.hw_ctrld   = false,
+	.rate	    = 32768,
+	.reset	    = false,
+	/* This is always on, cannot be enabled/disabled or reset */
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart_clk = {
+	.name	    = "UARTCLK",
+	.parent	    = &slow_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk keypad_clk = {
+	.name       = "KEYPAD",
+	.parent	    = &slow_clk,
+	.rate       = 32768,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.name       = "GPIO",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.name	    = "RTC",
+	.parent	    = &slow_clk,
+	.rate	    = 32768,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
+	/* This clock is always on, cannot be enabled/disabled */
+};
+
+static struct clk bustr_clk = {
+	.name       = "BUSTR",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk evhist_clk = {
+	.name       = "EVHIST",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk timer_clk = {
+	.name       = "TIMER",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk app_timer_clk = {
+	.name       = "TIMER_APP",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk ppm_clk = {
+	.name	    = "PPM",
+	.parent	    = &slow_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+#define DEF_LOOKUP(devid, clkref)		\
+	{					\
+	.dev_id = devid,			\
+	.clk = clkref,				\
+	}
+
+/*
+ * Here we only define clocks that are meaningful to
+ * look up through clockdevice.
+ */
+static struct clk_lookup lookups[] = {
+	/* Connected directly to the AMBA bus */
+	DEF_LOOKUP("amba", &amba_clk),
+	DEF_LOOKUP("cpu", &cpu_clk),
+	DEF_LOOKUP("nandif", &nandif_clk),
+	DEF_LOOKUP("semi", &semi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("isp", &isp_clk),
+	DEF_LOOKUP("cds", &cds_clk),
+#endif
+	DEF_LOOKUP("dma", &dma_clk),
+	DEF_LOOKUP("aaif", &aaif_clk),
+	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("video_enc", &video_enc_clk),
+	DEF_LOOKUP("xgam", &xgam_clk),
+	DEF_LOOKUP("ahb", &ahb_clk),
+	/* AHB bridge clocks */
+	DEF_LOOKUP("ahb", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon", &intcon_clk),
+	DEF_LOOKUP("mspro", &mspro_clk),
+	DEF_LOOKUP("pl172", &emif_clk),
+	/* FAST bridge clocks */
+	DEF_LOOKUP("fast", &fast_clk),
+	DEF_LOOKUP("mmci", &mmcsd_clk),
+	/*
+	 * The .0 and .1 identifiers on these comes from the platform device
+	 * .id field and are assigned when the platform devices are registered.
+	 */
+	DEF_LOOKUP("i2s.0", &i2s0_clk),
+	DEF_LOOKUP("i2s.1", &i2s1_clk),
+	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
+	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
+	DEF_LOOKUP("pl022", &spi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("uart1", &uart1_clk),
+#endif
+	/* SLOW bridge clocks */
+	DEF_LOOKUP("slow", &slow_clk),
+	DEF_LOOKUP("wdog", &wdog_clk),
+	DEF_LOOKUP("uart0", &uart_clk),
+	DEF_LOOKUP("apptimer", &app_timer_clk),
+	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("u300-gpio", &gpio_clk),
+	DEF_LOOKUP("rtc0", &rtc_clk),
+	DEF_LOOKUP("bustr", &bustr_clk),
+	DEF_LOOKUP("evhist", &evhist_clk),
+	DEF_LOOKUP("timer", &timer_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("ppm", &ppm_clk),
+#endif
+};
+
+static void __init clk_register(void)
+{
+	int i;
+
+	/* Register the lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+}
+
+/*
+ * These are the clocks for cells registered as primecell drivers
+ * on the AMBA bus. These must be on during AMBA device registration
+ * since the bus probe will attempt to read magic configuration
+ * registers for these devices. If they are deactivated these probes
+ * will fail.
+ *
+ *
+ * Please note that on emif, both RAM and NAND is connected in dual
+ * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
+ *
+ */
+void u300_clock_primecells(void)
+{
+	clk_enable(&intcon_clk);
+	clk_enable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_enable(&uart1_clk);
+#endif
+	clk_enable(&spi_clk);
+
+	clk_enable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_clock_primecells);
+
+void u300_unclock_primecells(void)
+{
+
+	clk_disable(&intcon_clk);
+	clk_disable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_disable(&uart1_clk);
+#endif
+	clk_disable(&spi_clk);
+	clk_disable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_unclock_primecells);
+
+/*
+ * The interrupt controller is enabled before the clock API is registered.
+ */
+void u300_enable_intcon_clock(void)
+{
+	clk_enable(&intcon_clk);
+}
+EXPORT_SYMBOL(u300_enable_intcon_clock);
+
+/*
+ * The timer is enabled before the clock API is registered.
+ */
+void u300_enable_timer_clock(void)
+{
+	clk_enable(&app_timer_clk);
+}
+EXPORT_SYMBOL(u300_enable_timer_clock);
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+/*
+ * The following makes it possible to view the status (especially
+ * reference count and reset status) for the clocks in the platform
+ * by looking into the special file <debugfs>/u300_clocks
+ */
+
+/* A list of all clocks in the platform */
+static struct clk *clks[] = {
+	/* Top node clock for the AMBA bus */
+	&amba_clk,
+	/* Connected directly to the AMBA bus */
+	&cpu_clk,
+	&nandif_clk,
+	&semi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&isp_clk,
+	&cds_clk,
+#endif
+	&dma_clk,
+	&aaif_clk,
+	&apex_clk,
+	&video_enc_clk,
+	&xgam_clk,
+	&ahb_clk,
+
+	/* AHB bridge clocks */
+	&ahb_subsys_clk,
+	&intcon_clk,
+	&mspro_clk,
+	&emif_clk,
+	/* FAST bridge clocks */
+	&fast_clk,
+	&mmcsd_clk,
+	&i2s0_clk,
+	&i2s1_clk,
+	&i2c0_clk,
+	&i2c1_clk,
+	&spi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_clk,
+#endif
+	/* SLOW bridge clocks */
+	&slow_clk,
+	&wdog_clk,
+	&uart_clk,
+	&app_timer_clk,
+	&keypad_clk,
+	&gpio_clk,
+	&rtc_clk,
+	&bustr_clk,
+	&evhist_clk,
+	&timer_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&ppm_clk,
+#endif
+};
+
+static int u300_clocks_show(struct seq_file *s, void *data)
+{
+	struct clk *clk;
+	int i;
+
+	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
+		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
+	seq_printf(s, "---------------------------------------------" \
+		   "-----------------------------------------\n");
+	for (i = 0; i < ARRAY_SIZE(clks); i++) {
+		clk = clks[i];
+		if (clk != ERR_PTR(-ENOENT)) {
+			/* Format clock and device name nicely */
+			char cdp[33];
+			int chars;
+
+			chars = snprintf(&cdp[0], 17, "%s", clk->name);
+			while (chars < 16) {
+				cdp[chars] = ' ';
+				chars++;
+			}
+			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
+					 dev_name(clk->dev) : "N/A");
+			while (chars < 16) {
+				cdp[chars+16] = ' ';
+				chars++;
+			}
+			cdp[32] = '\0';
+			if (clk->get_rate)
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ",
+					   clk->get_rate(clk));
+			else
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t" \
+					   "(unknown rate)\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ");
+		}
+	}
+	return 0;
+}
+
+static int u300_clocks_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u300_clocks_show, NULL);
+}
+
+static const struct file_operations u300_clocks_operations = {
+	.open		= u300_clocks_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void init_clk_read_procfs(void)
+{
+	/* Expose a simple debugfs interface to view all clocks */
+	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
+				   NULL, NULL, &u300_clocks_operations);
+}
+#else
+static inline void init_clk_read_procfs(void)
+{
+}
+#endif
+
+static int __init u300_clock_init(void)
+{
+	u16 val;
+
+	/*
+	 * FIXME: shall all this powermanagement stuff really live here???
+	 */
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Power management enable */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	clk_register();
+
+	init_clk_read_procfs();
+
+	/*
+	 * Some of these may be on when we boot the system so make sure they
+	 * are turned OFF.
+	 */
+	syscon_block_reset_enable(&timer_clk);
+	timer_clk.disable(&timer_clk);
+
+	/*
+	 * These shall be turned on by default when we boot the system
+	 * so make sure they are ON. (Adding CPU here is a bit too much.)
+	 * These clocks will be claimed by drivers later.
+	 */
+	syscon_block_reset_disable(&semi_clk);
+	syscon_block_reset_disable(&emif_clk);
+	semi_clk.enable(&semi_clk);
+	emif_clk.enable(&emif_clk);
+
+	return 0;
+}
+/* initialize clocking early to be available later in the boot */
+core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
new file mode 100644
index 00000000000..fc6d9ccfe7e
--- /dev/null
+++ b/arch/arm/mach-u300/clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-u300/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Adopted to ST-Ericsson U300 platforms by
+ * Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+#include <linux/clk.h>
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	struct device *dev;
+	const char *name;
+	struct clk *parent;
+
+	spinlock_t lock;
+	unsigned long rate;
+	bool reset;
+	__u16 clk_val;
+	__s8 usecount;
+	__u32 res_reg;
+	__u16 res_mask;
+
+	bool hw_ctrld;
+
+	void (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	void (*init) (struct clk *);
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+void u300_clock_primecells(void);
+void u300_unclock_primecells(void);
+void u300_enable_intcon_clock(void);
+void u300_enable_timer_clock(void);
+
+#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 00000000000..89b3ccf35e1
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,649 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+	{
+		.virtual	= U300_SLOW_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_AHB_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_FAST_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= 0xffff2000, /* TCM memory */
+		.pfn		= __phys_to_pfn(0xffff2000),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+
+	/*
+	 * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+	 * may have to be moved to 0x00000000 in order to use the ROM.
+	 */
+	/*
+	{
+		.virtual	= U300_BOOTROM_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_ROM,
+	},
+	*/
+};
+
+void __init u300_map_io(void)
+{
+	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+	.dev = {
+		.init_name = "uart0", /* Slow device at 0x3000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART0_BASE,
+		.end   = U300_UART0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+	.dev = {
+		.init_name = "uart1", /* Fast device at 0x7000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART1_BASE,
+		.end   = U300_UART1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+	.dev = {
+		.init_name = "pl172", /* AHB device at 0x4000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_EMIF_CFG_BASE,
+		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022", /* Fast device at 0x6000 offset */
+	},
+	.res = {
+		.start = U300_SPI_BASE,
+		.end   = U300_SPI_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_SPI, NO_IRQ },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+static struct amba_device mmcsd_device = {
+	.dev = {
+		.init_name = "mmci", /* Fast device at 0x1000 offset */
+		.platform_data = NULL, /* Added later */
+	},
+	.res = {
+		.start = U300_MMCSD_BASE,
+		.end   = U300_MMCSD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_device,
+#endif
+	&pl022_device,
+	&pl172_device,
+	&mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+	{
+		.start = U300_GPIO_BASE,
+		.end   = (U300_GPIO_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "gpio0",
+		.start = IRQ_U300_GPIO_PORT0,
+		.end   = IRQ_U300_GPIO_PORT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio1",
+		.start = IRQ_U300_GPIO_PORT1,
+		.end   = IRQ_U300_GPIO_PORT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio2",
+		.start = IRQ_U300_GPIO_PORT2,
+		.end   = IRQ_U300_GPIO_PORT2,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name  = "gpio3",
+		.start = IRQ_U300_GPIO_PORT3,
+		.end   = IRQ_U300_GPIO_PORT3,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio4",
+		.start = IRQ_U300_GPIO_PORT4,
+		.end   = IRQ_U300_GPIO_PORT4,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name  = "gpio5",
+		.start = IRQ_U300_GPIO_PORT5,
+		.end   = IRQ_U300_GPIO_PORT5,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio6",
+		.start = IRQ_U300_GPIO_PORT6,
+		.end   = IRQ_U300_GPIO_PORT6,
+		.flags = IORESOURCE_IRQ,
+	},
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+	{
+		.start = U300_KEYPAD_BASE,
+		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "coh901461-press",
+		.start = IRQ_U300_KEYPAD_KEYBF,
+		.end   = IRQ_U300_KEYPAD_KEYBF,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "coh901461-release",
+		.start = IRQ_U300_KEYPAD_KEYBR,
+		.end   = IRQ_U300_KEYPAD_KEYBR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start = U300_RTC_BASE,
+		.end   = U300_RTC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_RTC,
+		.end   = IRQ_U300_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+	{
+		.start = U300_NAND_IF_PHYS_BASE,
+		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct resource i2c0_resources[] = {
+	{
+		.start = U300_I2C0_BASE,
+		.end   = U300_I2C0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C0,
+		.end   = IRQ_U300_I2C0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c1_resources[] = {
+	{
+		.start = U300_I2C1_BASE,
+		.end   = U300_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C1,
+		.end   = IRQ_U300_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
+static struct resource wdog_resources[] = {
+	{
+		.start = U300_WDOG_BASE,
+		.end   = U300_WDOG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_WDOG,
+		.end   = IRQ_U300_WDOG,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+	{
+		.name  = "AVE3e I/O Area",
+		.start = U300_VIDEOENC_BASE,
+		.end   = U300_VIDEOENC_BASE + SZ_512K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e IRQ0",
+		.start = IRQ_U300_VIDEO_ENC_0,
+		.end   = IRQ_U300_VIDEO_ENC_0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e IRQ1",
+		.start = IRQ_U300_VIDEO_ENC_1,
+		.end   = IRQ_U300_VIDEO_ENC_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e Physmem Area",
+		.start = 0, /* 0 will be remapped to reserved memory */
+		.end   = SZ_1M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/*
+	 * The AVE3e requires two regions of 256MB that it considers
+	 * "invisible". The hardware will not be able to access these
+	 * adresses, so they should never point to system RAM.
+	 */
+	{
+		.name  = "AVE3e Reserved 0",
+		.start = 0xd0000000,
+		.end   = 0xd0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e Reserved 1",
+		.start = 0xe0000000,
+		.end   = 0xe0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device wdog_device = {
+	.name = "wdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(wdog_resources),
+	.resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+	.name = "stddci2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
+	.resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+	.name = "stddci2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
+	.resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+	.name = "u300-gpio",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(gpio_resources),
+	.resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+	.name = "keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+	.name = "rtc0",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_resources),
+	.resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+	.name = "nandif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(fsmc_resources),
+	.resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+	.name = "video_enc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ave_resources),
+	.resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+	&i2c0_device,
+	&i2c1_device,
+	&keypad_device,
+	&rtc_device,
+	&gpio_device,
+	&fsmc_device,
+	&wdog_device,
+	&ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+	u32 mask[2] = {0, 0};
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++)
+		set_bit(i, (unsigned long *) &mask[0]);
+	u300_enable_intcon_clock();
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+	u16 chipid;
+	const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+	{
+		.chipid = 0xb800,
+		.name = "DB3000",
+	},
+	{
+		.chipid = 0xc000,
+		.name = "DB3100",
+	},
+	{
+		.chipid = 0xc800,
+		.name = "DB3150",
+	},
+	{
+		.chipid = 0xd800,
+		.name = "DB3200",
+	},
+	{
+		.chipid = 0xe000,
+		.name = "DB3250",
+	},
+	{
+		.chipid = 0xe800,
+		.name = "DB3210",
+	},
+	{
+		.chipid = 0xf000,
+		.name = "DB3350 P1x",
+	},
+	{
+		.chipid = 0xf100,
+		.name = "DB3350 P2x",
+	},
+	{
+		.chipid = 0x0000, /* List terminator */
+		.name = NULL,
+	}
+};
+
+static void u300_init_check_chip(void)
+{
+
+	u16 val;
+	struct db_chip *chip;
+	const char *chipname;
+	const char unknown[] = "UNKNOWN";
+
+	/* Read out and print chip ID */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+	/* This is in funky bigendian order... */
+	val = (val & 0xFFU) << 8 | (val >> 8);
+	chip = db_chips;
+	chipname = unknown;
+
+	for ( ; chip->chipid; chip++) {
+		if (chip->chipid == (val & 0xFF00U)) {
+			chipname = chip->name;
+			break;
+		}
+	}
+	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+	       "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+	if ((val & 0xFF00U) != 0xc800) {
+		printk(KERN_ERR "Platform configured for BS25/BS26 " \
+		       "with DB3150 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+	if ((val & 0xFF00U) != 0xd800) {
+		printk(KERN_ERR "Platform configured for BS330 " \
+		       "with DB3200 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       " with DB3350 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+	if ((val & 0xFF00U) != 0xe800) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       "with DB3210 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+	unsigned long curr_start = __pa(high_memory);
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+		for (j = 0; j < platform_devs[i]->num_resources; j++) {
+			struct resource *const res =
+			  &platform_devs[i]->resource[j];
+
+			if (IORESOURCE_MEM == res->flags &&
+				     0 == res->start) {
+				res->start  = curr_start;
+				res->end   += curr_start;
+				curr_start += (res->end - res->start + 1);
+
+				printk(KERN_INFO "core.c: Mapping RAM " \
+				       "%#x-%#x to device %s:%s\n",
+					res->start, res->end,
+				       platform_devs[i]->name, res->name);
+			}
+		}
+	}
+}
+
+void __init u300_init_devices(void)
+{
+	int i;
+	u16 val;
+
+	/* Check what platform we run and print some status information */
+	u300_init_check_chip();
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Register the AMBA devices in the AMBA bus abstraction layer */
+	u300_clock_primecells();
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	u300_unclock_primecells();
+
+	u300_assign_physmem();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+	/*
+	 * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+	 * both subsystems are requesting this mode.
+	 * If we not share the Acc SDRAM, this is never the case. Therefore
+	 * enable it here from the App side.
+	 */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+	/*
+	 * This needs to be initialized later: it needs the input framework
+	 * to be initialized first.
+	 */
+	return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
new file mode 100644
index 00000000000..308cdb197a9
--- /dev/null
+++ b/arch/arm/mach-u300/gpio.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Need access to SYSCON registers for PADmuxing */
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+	const char *name;
+	int irq;
+	int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+	{
+		.name = "gpio0",
+		.number = 0,
+	},
+	{
+		.name = "gpio1",
+		.number = 1,
+	},
+	{
+		.name = "gpio2",
+		.number = 2,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name = "gpio3",
+		.number = 3,
+	},
+	{
+		.name = "gpio4",
+		.number = 4,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name = "gpio5",
+		.number = 5,
+	},
+	{
+		.name = "gpio6",
+		.number = 6,
+	},
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW   0
+#define DEFAULT_OUTPUT_HIGH  1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP  0
+#define ENABLE_PULL_UP  1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN       1
+#define GPIO_OUT      2
+
+struct u300_gpio_configuration_data {
+	unsigned char pin_usage;
+	unsigned char default_output_value;
+	unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 5, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 6, pind 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	}
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		/* These 4 pins doesn't exist on DB3210 */
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	}
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+	int (*callback)(void *);
+	void *data;
+	int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+	if (gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "registered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = func;
+	gpio_pin[gpio].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+	if (!gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "unregistered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = NULL;
+	gpio_pin[gpio].data = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_pin[gpio].users)
+		return -EINVAL;
+	else
+		gpio_pin[gpio].users++;
+
+	gpio_users++;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	gpio_users--;
+	gpio_pin[gpio].users--;
+	if (unlikely(gpio_pin[gpio].users < 0)) {
+		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+			 gpio);
+		gpio_pin[gpio].users = 0;
+	}
+
+	return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+	return readl(virtbase + U300_GPIO_PXPDIR +
+	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		/* set */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val | (1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		/* clear */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val & ~(1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin*/
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/* This is not needed since it sets the bits to zero.*/
+	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/*
+	 * FIXME: configure for push/pull, open drain or open source per pin
+	 * in setup. The current driver will only support push/pull.
+	 */
+	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((gpio & 0x07) << 1));
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	gpio_set_value(gpio, value);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+	u32 val;
+	unsigned long flags;
+	local_irq_save(flags);
+
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val |= (1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	if (edge)
+		val |= (1 << (gpio & 0x07));
+	else
+		val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct u300_gpio_port *port = dev_id;
+	u32 val;
+	int pin;
+
+	/* Read event register */
+	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask with enable register */
+	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask relevant bits */
+	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	/* ACK IRQ (clear event) */
+	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Print message */
+	while (val != 0) {
+		unsigned gpio;
+
+		pin = __ffs(val);
+		/* mask off this pin */
+		val &= ~(1 << pin);
+		gpio = (port->number << 3) + pin;
+
+		if (gpio_pin[gpio].callback)
+			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+		else
+			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+			       gpio);
+	}
+	return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+	int i, j;
+	unsigned long flags;
+	u32 val;
+
+	/* Write default values to all pins */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+
+	/*
+	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * default value on outputs.
+	 */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+			local_irq_save(flags);
+			val = readl(virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			/* Mask out this pin */
+			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+			writel(val, virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			local_irq_restore(flags);
+		}
+	}
+
+	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
+	for (i = 0; i < U300_GPIO_MAX; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+	u32 val;
+	int err = 0;
+	int i;
+	int num_irqs;
+
+	gpiodev = &pdev->dev;
+	memset(gpio_pin, 0, sizeof(gpio_pin));
+
+	/* Get GPIO clock */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(gpiodev, "could not get GPIO clock\n");
+		goto err_no_clk;
+	}
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(gpiodev, "could not enable GPIO clock\n");
+		goto err_no_clk_enable;
+	}
+
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres)
+		goto err_no_resource;
+
+	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+	    == NULL) {
+		err = -ENODEV;
+		goto err_no_ioregion;
+	}
+
+	virtbase = ioremap(memres->start, resource_size(memres));
+	if (!virtbase) {
+		err = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	dev_info(gpiodev, "remapped 0x%08x to %p\n",
+		 memres->start, virtbase);
+
+#ifdef U300_COH901335
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+	/* Turn on the GPIO block */
+	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+	val = readl(virtbase + U300_GPIO_CR);
+	dev_info(gpiodev, "COH901571/3 block version: %d, " \
+	       "number of cores: %d\n",
+	       ((val & 0x0000FE00) >> 9),
+	       ((val & 0x000001FC) >> 2));
+	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+	/* Set up some padmuxing here */
+#ifdef CONFIG_MMC
+	pmx_set_mission_mode_mmc();
+#endif
+#ifdef CONFIG_SPI_PL022
+	pmx_set_mission_mode_spi();
+#endif
+
+	gpio_set_initial_values();
+
+	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+		gpio_ports[num_irqs].irq =
+			platform_get_irq_byname(pdev,
+						gpio_ports[num_irqs].name);
+
+		err = request_irq(gpio_ports[num_irqs].irq,
+				  gpio_irq_handler, IRQF_DISABLED,
+				  gpio_ports[num_irqs].name,
+				  &gpio_ports[num_irqs]);
+		if (err) {
+			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+				gpio_ports[num_irqs].name);
+			goto err_no_irq;
+		}
+		/* Turns off PortX_irq_force */
+		writel(0x0, virtbase + U300_GPIO_PXIFR +
+				 num_irqs * U300_GPIO_PORTX_SPACING);
+	}
+
+	return 0;
+
+ err_no_irq:
+	for (i = 0; i < num_irqs; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+ err_no_ioremap:
+	release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+	clk_disable(clk);
+ err_no_clk_enable:
+	clk_put(clk);
+ err_no_clk:
+	dev_info(gpiodev, "module ERROR:%d\n", err);
+	return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+	int i;
+
+	/* Turn off the GPIO block */
+	writel(0x00000000U, virtbase + U300_GPIO_CR);
+	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+	release_mem_region(memres->start, memres->end - memres->start);
+	clk_disable(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static struct platform_driver gpio_driver = {
+	.driver		= {
+		.name	= "u300-gpio",
+	},
+	.remove		= __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+	return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
new file mode 100644
index 00000000000..92e3cc872c6
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
new file mode 100644
index 00000000000..f3a1cbbeeab
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/debug-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugging macro include header.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+
+	.macro	addruart,rx
+	/* If we move the adress using MMU, use this. */
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ MMU enabled?
+	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rx, \rx, #0x00003000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
new file mode 100644
index 00000000000..20731ae39d3
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/entry-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level IRQ helper macros for ST-Ericsson U300
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #0
+	teq	\irqstat, #0
+	bne	1002f
+1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #32
+	teq	\irqstat, #0
+	beq	1003f
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
new file mode 100644
index 00000000000..c8174128d7e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -0,0 +1,290 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/gpio.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_H
+#define __MACH_U300_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+/* Switch type depending on platform/chip variant */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_COH901335
+#endif
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
+#define U300_COH901571_3
+#endif
+
+/* Get base address for regs here */
+#include "u300-regs.h"
+/* IRQ numbers */
+#include "irqs.h"
+
+/*
+ * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
+ * used for anything, and often is. The event/enable etc figures are for
+ * the lowermost pin (pin 0 on each port), shift this left to match your
+ * pin if you're gonna use these values.
+ */
+#ifdef U300_COH901335
+#define U300_GPIO_PORTX_SPACING				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_GPIO_PXPDIR				(0x00)
+#define U300_GPIO_PXPDOR				(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x04)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x08)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x0C)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x10)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x14)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x18)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_GPIO_CR					(0x54)
+#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+/* three ports of 8 bits each = GPIO pins 0..23 */
+#define U300_GPIO_NUM_PORTS 3
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX	(U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+#ifdef U300_COH901571_3
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_GPIO_CR					(0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+#define U300_GPIO_PORTX_SPACING				(0x30)
+/* Port X Pin Data INPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDIR				(0x04)
+/* Port X Pin Data OUTPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDOR				(0x08)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x0C)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x14)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x18)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x1C)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x20)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+#ifdef CONFIG_MACH_U300_BS335
+/* seven ports of 8 bits each = GPIO pins 0..55 */
+#define U300_GPIO_NUM_PORTS 7
+#else
+/* five ports of 8 bits each = GPIO pins 0..39 */
+#define U300_GPIO_NUM_PORTS 5
+#endif
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP		4
+#define U300_GPIO_PIN_CAM_REG_EN	5
+#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_UART_CTS		2
+#define U300_GPIO_PIN_UART_RTS		3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
+#endif
+
+#endif
+
+/* translates a pin number to a port number */
+#define PIN_TO_PORT(val) (val >> 3)
+
+/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_register_callback(unsigned gpio,
+				  int (*func)(void *arg),
+				  void *);
+extern int gpio_unregister_callback(unsigned gpio);
+extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
+extern void disable_irq_on_gpio_pin(unsigned gpio);
+extern void gpio_pullup(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern void gpio_set_value(unsigned gpio, int value);
+
+/* wrappers to sleep-enable the previous two functions */
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	/*
+	 * FIXME: This is no 1-1 mapping at all, it points to the
+	 * whole block of 8 pins.
+	 */
+	return (irq - IRQ_U300_GPIO_PORT0) << 3;
+}
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
new file mode 100644
index 00000000000..b99d4ce0ac2
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-u300/include/mach/hardware.h
+ */
+#include <asm/sizes.h>
+#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h
new file mode 100644
index 00000000000..5d6b4c13b3a
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/io.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Dummy IO map for being able to use writew()/readw(),
+ * writel()/readw() and similar accessor functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
new file mode 100644
index 00000000000..a6867b12773
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/irqs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * IRQ channel definitions for the U300 platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_U300_INTCON0_START		0
+#define IRQ_U300_INTCON1_START		32
+/* These are on INTCON0 - 30 lines */
+#define IRQ_U300_IRQ0_EXT		0
+#define IRQ_U300_IRQ1_EXT		1
+#define IRQ_U300_DMA			2
+#define IRQ_U300_VIDEO_ENC_0		3
+#define IRQ_U300_VIDEO_ENC_1		4
+#define IRQ_U300_AAIF_RX		5
+#define IRQ_U300_AAIF_TX		6
+#define IRQ_U300_AAIF_VGPIO		7
+#define IRQ_U300_AAIF_WAKEUP		8
+#define IRQ_U300_PCM_I2S0_FRAME		9
+#define IRQ_U300_PCM_I2S0_FIFO		10
+#define IRQ_U300_PCM_I2S1_FRAME		11
+#define IRQ_U300_PCM_I2S1_FIFO		12
+#define IRQ_U300_XGAM_GAMCON		13
+#define IRQ_U300_XGAM_CDI		14
+#define IRQ_U300_XGAM_CDICON		15
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+/* MMIACC not used on the DB3210 or DB3350 chips */
+#define IRQ_U300_XGAM_MMIACC		16
+#endif
+#define IRQ_U300_XGAM_PDI		17
+#define IRQ_U300_XGAM_PDICON		18
+#define IRQ_U300_XGAM_GAMEACC		19
+#define IRQ_U300_XGAM_MCIDCT		20
+#define IRQ_U300_APEX			21
+#define IRQ_U300_UART0			22
+#define IRQ_U300_SPI			23
+#define IRQ_U300_TIMER_APP_OS		24
+#define IRQ_U300_TIMER_APP_DD		25
+#define IRQ_U300_TIMER_APP_GP1		26
+#define IRQ_U300_TIMER_APP_GP2		27
+#define IRQ_U300_TIMER_OS		28
+#define IRQ_U300_TIMER_MS		29
+#define IRQ_U300_KEYPAD_KEYBF		30
+#define IRQ_U300_KEYPAD_KEYBR		31
+/* These are on INTCON1 - 32 lines */
+#define IRQ_U300_GPIO_PORT0		32
+#define IRQ_U300_GPIO_PORT1		33
+#define IRQ_U300_GPIO_PORT2		34
+
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
+    defined(CONFIG_MACH_U300_BS335)
+/* These are for DB3150, DB3200 and DB3350 */
+#define IRQ_U300_WDOG			35
+#define IRQ_U300_EVHIST			36
+#define IRQ_U300_MSPRO			37
+#define IRQ_U300_MMCSD_MCIINTR0		38
+#define IRQ_U300_MMCSD_MCIINTR1		39
+#define IRQ_U300_I2C0			40
+#define IRQ_U300_I2C1			41
+#define IRQ_U300_RTC			42
+#define IRQ_U300_NFIF			43
+#define IRQ_U300_NFIF2			44
+#endif
+
+/* DB3150 and DB3200 have only 45 IRQs */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_NR_IRQS			45
+#endif
+
+/* The DB3350-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS335
+#define IRQ_U300_ISP_F0			45
+#define IRQ_U300_ISP_F1			46
+#define IRQ_U300_ISP_F2			47
+#define IRQ_U300_ISP_F3			48
+#define IRQ_U300_ISP_F4			49
+#define IRQ_U300_GPIO_PORT3		50
+#define IRQ_U300_SYSCON_PLL_LOCK	51
+#define IRQ_U300_UART1			52
+#define IRQ_U300_GPIO_PORT4		53
+#define IRQ_U300_GPIO_PORT5		54
+#define IRQ_U300_GPIO_PORT6		55
+#define U300_NR_IRQS			56
+#endif
+
+/* The DB3210-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS365
+#define IRQ_U300_GPIO_PORT3		35
+#define IRQ_U300_GPIO_PORT4		36
+#define IRQ_U300_WDOG			37
+#define IRQ_U300_EVHIST			38
+#define IRQ_U300_MSPRO			39
+#define IRQ_U300_MMCSD_MCIINTR0		40
+#define IRQ_U300_MMCSD_MCIINTR1		41
+#define IRQ_U300_I2C0			42
+#define IRQ_U300_I2C1			43
+#define IRQ_U300_RTC			44
+#define IRQ_U300_NFIF			45
+#define IRQ_U300_NFIF2			46
+#define IRQ_U300_SYSCON_PLL_LOCK	47
+#define U300_NR_IRQS			48
+#endif
+
+#define NR_IRQS U300_NR_IRQS
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
new file mode 100644
index 00000000000..bf134bcc129
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/memory.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Memory virtual/physical mapping constants.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_MACH_U300_DUAL_RAM
+
+#define PHYS_OFFSET		UL(0x48000000)
+#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+
+#else
+
+#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#else
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#endif
+#define BOOT_PARAMS_OFFSET (0x28000000 + \
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
+#endif
+
+/*
+ * We enable a real big DMA buffer if need be.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
new file mode 100644
index 00000000000..77d9210a82e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/platform.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic platform init and mapping functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+void u300_map_io(void);
+void u300_init_irq(void);
+void u300_init_devices(void);
+extern struct sys_timer u300_timer;
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
new file mode 100644
index 00000000000..1c90d1b1ccb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -0,0 +1,644 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/syscon.h
+ *
+ *
+ * Copyright (C) 2008 ST-Ericsson AB
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifndef __MACH_SYSCON_H
+#define __MACH_SYSCON_H
+
+/*
+ * All register defines for SYSCON registers that concerns individual
+ * block clocks and reset lines are registered here. This is because
+ * we don't want any other file to try to fool around with this stuff.
+ */
+
+/* APP side SYSCON registers */
+/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR						(0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR						(0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR						(0x0014)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
+#endif
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR						(0x0018)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
+#endif
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR						(0x001c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
+#endif
+#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR					(0x0020)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR					(0x0024)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN    			(0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN     			(0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN     			(0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN     			(0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR					(0x0028)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
+#endif
+#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER					(0x002c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
+#endif
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
+#endif
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
+#endif
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR					(0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR					(0x003c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
+#endif
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR					(0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR					(0x44)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
+#endif
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR					(0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
+/*
+ * All other clocking registers moved to clock.c!
+ */
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR						(0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR					(0x70)
+#define U300_SYSCON_SRCLR_MASK					(0x03FF)
+#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR					(0x0078)
+#define U300_SYSCON_ECCR_MASK					(0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
+/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
+#define U300_SYSCON_PMC1LR					(0x007C)
+#define U300_SYSCON_PMC1LR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
+#define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
+#define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
+#define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
+#define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
+#define U300_SYSCON_PMC1LR_PDI_WCDMA				(0x3000)
+#define U300_SYSCON_PMC1LR_MMCSD_MASK				(0x0C00)
+#define U300_SYSCON_PMC1LR_MMCSD_MMCSD				(0x0000)
+#define U300_SYSCON_PMC1LR_MMCSD_MSPRO				(0x0400)
+#define U300_SYSCON_PMC1LR_MMCSD_DSP				(0x0800)
+#define U300_SYSCON_PMC1LR_MMCSD_WCDMA				(0x0C00)
+#define U300_SYSCON_PMC1LR_ETM_MASK				(0x0300)
+#define U300_SYSCON_PMC1LR_ETM_ACC				(0x0000)
+#define U300_SYSCON_PMC1LR_ETM_APP				(0x0100)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK			(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF			(0x0040)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM			(0x0080)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB		(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF			(0x0010)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM			(0x0020)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF			(0x0004)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM			(0x0008)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_MASK				(0x0003)
+#define U300_SYSCON_PMC1LR_EMIF_1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0			(0x0001)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1			(0x0002)
+#define U300_SYSCON_PMC1LR_EMIF_1				(0x0003)
+/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
+#define U300_SYSCON_PMC1HR					(0x007E)
+#define U300_SYSCON_PMC1HR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1HR_MISC_2_MASK				(0xC000)
+#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_MISC_2_MSPRO				(0x4000)
+#define U300_SYSCON_PMC1HR_MISC_2_DSP				(0x8000)
+#define U300_SYSCON_PMC1HR_MISC_2_AAIF				(0xC000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF			(0x1000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP			(0x2000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC			(0x0400)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP			(0x0800)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI			(0x0100)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI			(0x0040)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI			(0x0010)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP			(0x0020)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0			(0x0004)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS			(0x0008)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK			(0x0003)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0			(0x0001)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF			(0x0003)
+/* Step one for killing the applications system 16bit (-/W) */
+#define U300_SYSCON_KA1R					(0x0080)
+#define U300_SYSCON_KA1R_MASK					(0xFFFF)
+#define U300_SYSCON_KA1R_VALUE					(0xFFFF)
+/* Step two for killing the application system 16bit (-/W) */
+#define U300_SYSCON_KA2R					(0x0084)
+#define U300_SYSCON_KA2R_MASK					(0xFFFF)
+#define U300_SYSCON_KA2R_VALUE					(0xFFFF)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R					(0x90)
+#define U300_SYSCON_MMF0R_MASK					(0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R					(0x94)
+#define U300_SYSCON_MMF1R_MASK					(0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
+/* AAIF control register 16 bit (R/W) */
+#define U300_SYSCON_AAIFCR					(0x98)
+#define U300_SYSCON_AAIFCR_MASK					(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK			(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL			(0x0000)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING			(0x0001)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT			(0x0002)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT			(0x0003)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR					(0x9C)
+#define U300_SYSCON_MMCR_MASK					(0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
+
+/* TODO: More SYSCON registers missing */
+#define U300_SYSCON_PMC3R					(0x10c)
+#define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
+#define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
+/* TODO: Missing other configs, I just added the SPI stuff */
+
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR					(0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR					(0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR					(0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
+#define U300_SYSCON_MCR						(0x12c)
+#define U300_SYSCON_MCR_FIELD_MASK				(0x00FF)
+#define U300_SYSCON_MCR_PMGEN_CR_4_MASK				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_4_SPI				(0x0040)
+#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_2_MASK				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC		(0x0010)
+#define U300_SYSCON_MCR_PMGEN_CR_2_DSP				(0x0020)
+#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_0_MASK				(0x000C)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1		(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2		(0x0004)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3		(0x0008)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
+#define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
+#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR					(0x140)
+#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR					(0x144)
+#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR					(0x148)
+#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR					(0x400)
+/* Video IRQ clear 16bit (R/W) */
+#define U300_SYSCON_VICR					(0x404)
+#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE		(0x0002)
+#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE		(0x0001)
+/* SMCR */
+#define U300_SYSCON_SMCR					(0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR					(0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR						(0x4f8)
+#define U300_SYSCON_PCR_SERV_IND				(0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR						(0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
+
+
+/* CPU clock defines */
+/**
+ * CPU high frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_HIGH    208
+/**
+ * CPU medium frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_MEDIUM  104
+/**
+ * CPU low frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_LOW      13
+
+/* EMIF clock defines */
+/**
+ * EMIF high frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_HIGH   104
+/**
+ * EMIF medium frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_MEDIUM 104
+/**
+ * EMIF low frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_LOW     13
+
+/* AHB clock defines */
+/**
+ * AHB high frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_HIGH     52
+/**
+ * AHB medium frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_MEDIUM   52
+/**
+ * AHB low frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
+
+enum syscon_busmaster {
+  SYSCON_BM_DMAC,
+  SYSCON_BM_XGAM,
+  SYSCON_BM_VIDEO_ENC
+};
+
+/*
+ * Note that this array must match the order of the array "clk_reg"
+ * in syscon.c
+ */
+enum syscon_clk {
+  SYSCON_CLKCONTROL_SLOW_BRIDGE,
+  SYSCON_CLKCONTROL_UART,
+  SYSCON_CLKCONTROL_BTR,
+  SYSCON_CLKCONTROL_EH,
+  SYSCON_CLKCONTROL_GPIO,
+  SYSCON_CLKCONTROL_KEYPAD,
+  SYSCON_CLKCONTROL_APP_TIMER,
+  SYSCON_CLKCONTROL_ACC_TIMER,
+  SYSCON_CLKCONTROL_FAST_BRIDGE,
+  SYSCON_CLKCONTROL_I2C0,
+  SYSCON_CLKCONTROL_I2C1,
+  SYSCON_CLKCONTROL_I2S0,
+  SYSCON_CLKCONTROL_I2S1,
+  SYSCON_CLKCONTROL_MMC,
+  SYSCON_CLKCONTROL_SPI,
+  SYSCON_CLKCONTROL_I2S0_CORE,
+  SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_AAIF,
+  SYSCON_CLKCONTROL_AHB,
+  SYSCON_CLKCONTROL_APEX,
+  SYSCON_CLKCONTROL_CPU,
+  SYSCON_CLKCONTROL_DMA,
+  SYSCON_CLKCONTROL_EMIF,
+  SYSCON_CLKCONTROL_NAND_IF,
+  SYSCON_CLKCONTROL_VIDEO_ENC,
+  SYSCON_CLKCONTROL_XGAM,
+  SYSCON_CLKCONTROL_SEMI,
+  SYSCON_CLKCONTROL_AHB_SUBSYS,
+  SYSCON_CLKCONTROL_MSPRO
+};
+
+enum syscon_sysclk_mode {
+  SYSCON_SYSCLK_DISABLED,
+  SYSCON_SYSCLK_M_CLK,
+  SYSCON_SYSCLK_ACC_FSM,
+  SYSCON_SYSCLK_PLL60_48,
+  SYSCON_SYSCLK_PLL60_60,
+  SYSCON_SYSCLK_ACC_PLL208,
+  SYSCON_SYSCLK_APP_PLL13,
+  SYSCON_SYSCLK_APP_FSM,
+  SYSCON_SYSCLK_RTC,
+  SYSCON_SYSCLK_APP_PLL208
+};
+
+enum syscon_sysclk_req {
+  SYSCON_SYSCLKREQ_DISABLED,
+  SYSCON_SYSCLKREQ_ACTIVE_LOW
+};
+
+enum syscon_clk_mode {
+  SYSCON_CLKMODE_OFF,
+  SYSCON_CLKMODE_DEFAULT,
+  SYSCON_CLKMODE_LOW,
+  SYSCON_CLKMODE_MEDIUM,
+  SYSCON_CLKMODE_HIGH,
+  SYSCON_CLKMODE_PERMANENT,
+  SYSCON_CLKMODE_ON,
+};
+
+enum syscon_call_mode {
+  SYSCON_CLKCALL_NOWAIT,
+  SYSCON_CLKCALL_WAIT,
+};
+
+int syscon_dc_on(bool keep_power_on);
+int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
+				      bool active);
+bool syscon_get_busmaster_active_state(void);
+int syscon_set_sleep_mask(enum syscon_clk,
+			  bool sleep_ctrl);
+int syscon_config_sysclk(u32 sysclk,
+			 enum syscon_sysclk_mode sysclkmode,
+			 bool inverse,
+			 u32 divisor,
+			 enum syscon_sysclk_req sysclkreq);
+bool syscon_can_turn_off_semi_clock(void);
+
+/* This function is restricted to core.c */
+int syscon_request_normal_power(bool req);
+
+/* This function is restricted to be used by platform_speed.c */
+int syscon_speed_request(enum syscon_call_mode wait_mode,
+			 enum syscon_clk_mode req_clk_mode);
+#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
new file mode 100644
index 00000000000..8daf13634ce
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/system.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * System shutdown and reset functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
+		/* Disable interrupts */
+		local_irq_disable();
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
new file mode 100644
index 00000000000..f233b72633f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/timex.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform tick rate definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+/* This is for the APP OS GP1 (General Purpose 1) timer */
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
new file mode 100644
index 00000000000..88333dfb19f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+#define U300_NAND_CS0_VIRT_BASE		0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+#define U300_NAND_IF_VIRT_BASE		0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE		0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE			(0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE		(0xc0080000)
+#else
+#define U300_VIDEOENC_BASE		(0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 46d4ca91af7..29acb718acf 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -1,8 +1,7 @@
 /*
- *  arch/arm/mach-imxads/include/mach/system.h
+ * arch/arm/mach-u300/include/mach/uncompress.h
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2003 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,23 +17,30 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
+#define AMBA_UART_DR	(*(volatile unsigned char *)0xc0013000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0xc001302C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0xc0013030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0xc0013018)
 
-static void
-arch_idle(void)
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
 {
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
 }
 
-static inline void
-arch_reset(char mode, const char *cmd)
+static inline void flush(void)
 {
-	cpu_reset(0);
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
 }
 
-#endif
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b00c51a66fb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/vmalloc.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Virtual memory allocations
+ * End must be above the I/O registers and on an even 2MiB boundary.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
new file mode 100644
index 00000000000..3138d3955c9
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.c
@@ -0,0 +1,216 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Johan Lundin <johan.lundin@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/mmc/host.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/mmc.h>
+#include "mmc.h"
+
+struct mmci_card_event {
+	struct input_dev *mmc_input;
+	int mmc_inserted;
+	struct work_struct workq;
+	struct mmc_platform_data mmc0_plat_data;
+};
+
+static unsigned int mmc_status(struct device *dev)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+	return mmci_card->mmc_inserted;
+}
+
+/*
+ * Here follows a large chunk of code which will only be enabled if you
+ * have both the AB3100 chip mounted and the MMC subsystem activated.
+ */
+
+static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
+{
+	int v;
+
+	/*
+	 * MMC Spec:
+	 * bit 7:	1.70 - 1.95V
+	 * bit 8 - 14:	2.0 - 2.6V
+	 * bit 15 - 23:	2.7 - 3.6V
+	 *
+	 * ab3100 voltages:
+	 * 000 - 2.85V
+	 * 001 - 2.75V
+	 * 010 - 1.8V
+	 * 011 - 1.5V
+	 */
+	switch (voltage) {
+	case 8:
+		v = 3;
+		break;
+	case 9:
+	case 10:
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+		v = 1;
+		break;
+	case 16:
+		v = 1;
+		break;
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 22:
+	case 23:
+	case 24:
+		v = 0;
+		break;
+	default:
+		v = 0;
+		break;
+	}
+
+	/* PL180 voltage register bits */
+	return v << 2;
+}
+
+
+
+static int mmci_callback(void *data)
+{
+	struct mmci_card_event *mmci_card = data;
+
+	disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD);
+	schedule_work(&mmci_card->workq);
+
+	return 0;
+}
+
+
+static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+
+	return sprintf(buf, "%d\n", !mmci_card->mmc_inserted);
+}
+
+static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL);
+
+static void _mmci_callback(struct work_struct *ws)
+{
+
+	struct mmci_card_event *mmci_card = container_of(
+		ws,
+		struct mmci_card_event, workq);
+
+	mdelay(20);
+
+	mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+
+	input_report_switch(mmci_card->mmc_input, KEY_INSERT,
+			    !mmci_card->mmc_inserted);
+	input_sync(mmci_card->mmc_input);
+
+	pr_debug("MMC/SD card was %s\n",
+		 mmci_card->mmc_inserted ? "removed" : "inserted");
+
+	enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+}
+
+int __devinit mmc_init(struct amba_device *adev)
+{
+	struct mmci_card_event *mmci_card;
+	struct device *mmcsd_device = &adev->dev;
+	int ret = 0;
+
+	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
+	if (!mmci_card)
+		return -ENOMEM;
+
+	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
+	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
+	mmci_card->mmc0_plat_data.status = mmc_status;
+
+	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
+
+	INIT_WORK(&mmci_card->workq, _mmci_callback);
+
+	ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection");
+	if (ret) {
+		printk(KERN_CRIT "Could not allocate MMC card detection " \
+		       "GPIO pin\n");
+		goto out;
+	}
+
+	ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD);
+	if (ret) {
+		printk(KERN_CRIT "Invalid GPIO pin requested\n");
+		goto out;
+	}
+
+	ret = sysfs_create_file(&mmcsd_device->kobj,
+			       &dev_attr_mmc_inserted.attr);
+	if (ret)
+		goto out;
+
+	mmci_card->mmc_input = input_allocate_device();
+	if (!mmci_card->mmc_input) {
+		printk(KERN_CRIT "Could not allocate MMC input device\n");
+		return -ENOMEM;
+	}
+
+	mmci_card->mmc_input->name = "MMC insert notification";
+	mmci_card->mmc_input->id.bustype = BUS_HOST;
+	mmci_card->mmc_input->id.vendor = 0;
+	mmci_card->mmc_input->id.product = 0;
+	mmci_card->mmc_input->id.version = 0x0100;
+	mmci_card->mmc_input->dev.parent = mmcsd_device;
+	input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT);
+
+	/*
+	 * Since this must always be compiled into the kernel, this input
+	 * is never unregistered or free:ed.
+	 */
+	ret = input_register_device(mmci_card->mmc_input);
+	if (ret) {
+		input_free_device(mmci_card->mmc_input);
+		goto out;
+	}
+
+	input_set_drvdata(mmci_card->mmc_input, mmci_card);
+
+	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
+				     mmci_card);
+
+	schedule_work(&mmci_card->workq);
+
+	printk(KERN_INFO "Registered MMC insert/remove notification\n");
+out:
+	return ret;
+}
diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h
new file mode 100644
index 00000000000..92b85125abb
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.h
@@ -0,0 +1,18 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/amba/bus.h>
+
+int __devinit mmc_init(struct amba_device *adev);
+
+#endif
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
new file mode 100644
index 00000000000..f3664564f08
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.c
@@ -0,0 +1,58 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/u300-regs.h>
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
+void pmx_set_mission_mode_mmc(void)
+{
+	u16 val;
+
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
+
+void pmx_set_mission_mode_spi(void)
+{
+	u16 val;
+
+	/* Set up padmuxing so the SPI port and its chipselects are active */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	/*
+	 * Activate the SPI port (disable the use of these pins for generic
+	 * GPIO, DSP, AAIF
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
+	/*
+	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
+	/*
+	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
new file mode 100644
index 00000000000..8c2099ac504
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX API
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+
+#ifndef __MACH_U300_PADMUX_H
+#define __MACH_U300_PADMUX_H
+
+void pmx_set_mission_mode_mmc(void);
+void pmx_set_mission_mode_spi(void);
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
new file mode 100644
index 00000000000..cce53204880
--- /dev/null
+++ b/arch/arm/mach-u300/timer.c
@@ -0,0 +1,422 @@
+/*
+ *
+ * arch/arm/mach-u300/timer.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Timer COH 901 328, runs the OS timer interrupt.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/* Generic stuff */
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+#include "clock.h"
+
+/*
+ * APP side special timer registers
+ * This timer contains four timers which can fire an interrupt each.
+ * OS (operating system) timer @ 32768 Hz
+ * DD (device driver) timer @ 1 kHz
+ * GP1 (general purpose 1) timer @ 1MHz
+ * GP2 (general purpose 2) timer @ 1MHz
+ */
+
+/* Reset OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_ROST					(0x0000)
+#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
+/* Enable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_EOST					(0x0004)
+#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
+/* Disable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_DOST					(0x0008)
+#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
+/* OS Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SOSTM					(0x000c)
+#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
+/* OS Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTS					(0x0010)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
+/* OS Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTCC					(0x0014)
+/* OS Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_OSTTC					(0x0018)
+/* OS Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIE					(0x001c)
+#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
+/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIA					(0x0020)
+#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
+
+/* Reset DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_RDDT					(0x0040)
+#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
+/* Enable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_EDDT					(0x0044)
+#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
+/* Disable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_DDDT					(0x0048)
+#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
+/* DD Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SDDTM					(0x004c)
+#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
+/* DD Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTS					(0x0050)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
+/* DD Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTCC					(0x0054)
+/* DD Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_DDTTC					(0x0058)
+/* DD Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIE					(0x005c)
+#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
+/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIA					(0x0060)
+#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
+
+/* Reset GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT1					(0x0080)
+#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
+/* Enable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT1					(0x0084)
+#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
+/* Disable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT1					(0x0088)
+#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
+/* GP1 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT1M					(0x008c)
+#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
+/* GP1 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1S					(0x0090)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
+/* GP1 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1CC					(0x0094)
+/* GP1 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT1TC					(0x0098)
+/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IE					(0x009c)
+#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
+/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IA					(0x00a0)
+#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
+
+/* Reset GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT2					(0x00c0)
+#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
+/* Enable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT2					(0x00c4)
+#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
+/* Disable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT2					(0x00c8)
+#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
+/* GP2 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT2M					(0x00cc)
+#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
+/* GP2 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2S					(0x00d0)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
+/* GP2 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2CC					(0x00d4)
+/* GP2 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT2TC					(0x00d8)
+/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IE					(0x00dc)
+#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
+/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IA					(0x00e0)
+#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
+
+/* Clock request control register - all four timers */
+#define U300_TIMER_APP_CRC					(0x100)
+#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
+
+#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+
+/*
+ * The u300_set_mode() function is always called first, if we
+ * have oneshot timer active, the oneshot scheduling function
+ * u300_set_next_event() is called immediately after.
+ */
+static void u300_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Set the periodic mode to a certain number of ticks per
+		 * jiffy.
+		 */
+		writel(TICKS_PER_JIFFY,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/*
+		 * Set continuous mode, so the timer keeps triggering
+		 * interrupts.
+		 */
+		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable timer interrupts */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Then enable the OS timer again */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Just break; here? */
+		/*
+		 * The actual event will be programmed by the next event hook,
+		 * so we just set a dummy value somewhere at the end of the
+		 * universe here.
+		 */
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Expire far in the future, u300_set_next_event() will be
+		 * called soon...
+		 */
+		writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/* We run one shot per tick here! */
+		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable interrupts for this timer */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Enable timer */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* Disable interrupts on GP1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		/* Ignore this call */
+		break;
+	}
+}
+
+/*
+ * The app timer in one shot mode obviously has to be reprogrammed
+ * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+ * the interrupt disable + timer disable commands with a reset command,
+ * it will fail miserably. Apparently (and I found this the hard way)
+ * the timer is very sensitive to the instruction order, though you don't
+ * get that impression from the data sheet.
+ */
+static int u300_set_next_event(unsigned long cycles,
+			       struct clock_event_device *evt)
+
+{
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+	/* IRQ in n * cycles */
+	writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+	/*
+	 * We run one shot per tick here! (This is necessary to reconfigure,
+	 * the timer will tilt if you don't!)
+	 */
+	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+	/* Enable timer interrupts */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Then enable the OS timer again */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+	return 0;
+}
+
+
+/* Use general purpose timer 1 as clock event */
+static struct clock_event_device clockevent_u300_1mhz = {
+	.name           = "GPT1",
+	.rating         = 300, /* Reasonably fast and accurate clock event */
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.set_next_event = u300_set_next_event,
+	.set_mode       = u300_set_mode,
+};
+
+/* Clock event timer interrupt handler */
+static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_u300_1mhz;
+	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
+	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction u300_timer_irq = {
+	.name           = "U300 Timer Tick",
+	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler        = u300_timer_interrupt,
+};
+
+/* Use general purpose timer 2 as clock source */
+static cycle_t u300_get_cycles(struct clocksource *cs)
+{
+	return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+}
+
+static struct clocksource clocksource_u300_1mhz = {
+	.name           = "GPT2",
+	.rating         = 300, /* Reasonably fast and accurate clock source */
+	.read           = u300_get_cycles,
+	.mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/*
+ * This sets up the system timers, clock source and clock event.
+ */
+static void __init u300_timer_init(void)
+{
+	u300_enable_timer_clock();
+	/*
+	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
+	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+	 */
+	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+	writel(U300_TIMER_APP_ROST_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+
+	/* Set up the IRQ handler */
+	setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+
+	/* Reset the General Purpose timer 2 */
+	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+	/* Set this timer to run around forever */
+	writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+	/* Set continuous mode so it wraps around */
+	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+	/* Disable timer interrupts */
+	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+	/* Then enable the GP2 timer to use as a free running us counter */
+	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+
+	/* This is a pure microsecond clock source */
+	clocksource_u300_1mhz.mult =
+		clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+	if (clocksource_register(&clocksource_u300_1mhz))
+		printk(KERN_ERR "timer: failed to initialize clock "
+		       "source %s\n", clocksource_u300_1mhz.name);
+
+	clockevent_u300_1mhz.mult =
+		div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+	/* 32bit counter, so 32bits delta is max */
+	clockevent_u300_1mhz.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
+	/* This timer is slow enough to set for 1 cycle == 1 MHz */
+	clockevent_u300_1mhz.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_u300_1mhz);
+	clockevent_u300_1mhz.cpumask = cpumask_of(0);
+	clockevents_register_device(&clockevent_u300_1mhz);
+	/*
+	 * TODO: init and register the rest of the timers too, they can be
+	 * used by hrtimers!
+	 */
+}
+
+/*
+ * Very simple system timer that only register the clock event and
+ * clock source.
+ */
+struct sys_timer u300_timer = {
+	.init		= u300_timer_init,
+};
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
new file mode 100644
index 00000000000..d2a0b8847a1
--- /dev/null
+++ b/arch/arm/mach-u300/u300.c
@@ -0,0 +1,55 @@
+/*
+ *
+ * arch/arm/mach-u300/u300.c
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform machine definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init u300_init_machine(void)
+{
+	u300_init_devices();
+}
+
+#ifdef CONFIG_MACH_U300_BS2X
+#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS330
+#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
+#endif
+
+MACHINE_START(U300, MACH_U300_STRING)
+	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+	.phys_io	= U300_AHB_PER_PHYS_BASE,
+	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= BOOT_PARAMS_OFFSET,
+	.map_io		= u300_map_io,
+	.init_irq	= u300_init_irq,
+	.timer		= &u300_timer,
+	.init_machine	= u300_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1f929c391af..69214fc8bd1 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
 {
 	unsigned int i;
 
-	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
 
 	set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 
@@ -413,7 +413,7 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 0c0c1d63f1c..d50c94f4dbd 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o
+obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
 
 # W90X900 CPU support files
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
new file mode 100644
index 00000000000..f420613cd39
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		(clk->enable)(clk, 1);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		(clk->enable)(clk, 0);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void w90x900_clk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
new file mode 100644
index 00000000000..4f27bda76d5
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void w90x900_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+	unsigned long		cken;
+	unsigned int		enabled;
+	void			(*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_clk_enable,		\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+#define DEF_CLKLOOK(_clk, _devname, _conname)		\
+	{						\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index de29ddcb945..57b5dbabeb4 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -41,7 +41,7 @@ struct sys_timer;
 extern void w90x900_init_irq(void);
 extern void w90p910_init_io(struct map_desc *mach_desc, int size);
 extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(int xtal);
+extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
new file mode 100644
index 00000000000..c72e0dfa182
--- /dev/null
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-w90p910/gpio.c
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#define GPIO_BASE 		(W90X900_VA_GPIO)
+#define GPIO_DIR		(0x04)
+#define GPIO_OUT		(0x08)
+#define GPIO_IN			(0x0C)
+#define GROUPINERV		(0x10)
+#define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
+#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+
+#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = w90p910_dir_input,		\
+			.direction_output = w90p910_dir_output,		\
+			.get		  = w90p910_gpio_get,		\
+			.set		  = w90p910_gpio_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = nr_gpio,			\
+		}							\
+	}
+
+struct w90p910_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*regbase;	/* Base of group register*/
+	spinlock_t 		gpio_lock;
+};
+
+static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	unsigned int regval;
+
+	regval = __raw_readl(pio);
+	regval &= GPIO_GPIO(offset);
+
+	return (regval != 0);
+}
+
+static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+}
+
+static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval &= ~GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval |= GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	regval = __raw_readl(outreg);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, outreg);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static struct w90p910_gpio_chip w90p910_gpio[] = {
+	W90P910_GPIO_CHIP("GROUPC", 0, 16),
+	W90P910_GPIO_CHIP("GROUPD", 16, 10),
+	W90P910_GPIO_CHIP("GROUPE", 26, 14),
+	W90P910_GPIO_CHIP("GROUPF", 40, 10),
+	W90P910_GPIO_CHIP("GROUPG", 50, 17),
+	W90P910_GPIO_CHIP("GROUPH", 67, 8),
+	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+};
+
+void __init w90p910_init_gpio(int nr_group)
+{
+	unsigned	i;
+	struct w90p910_gpio_chip *gpio_chip;
+
+	for (i = 0; i < nr_group; i++) {
+		gpio_chip = &w90p910_gpio[i];
+		spin_lock_init(&gpio_chip->gpio_lock);
+		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
+		gpiochip_add(&gpio_chip->chip);
+	}
+}
diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
new file mode 100644
index 00000000000..034da3e390c
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-w90p910/include/mach/gpio.h
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_W90P910_GPIO_H
+#define __ASM_ARCH_W90P910_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
index 1c583f9cbcd..9d5cba3a509 100644
--- a/arch/arm/mach-w90x900/include/mach/irqs.h
+++ b/arch/arm/mach-w90x900/include/mach/irqs.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/irqs.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -31,6 +29,11 @@
 /* Main cpu interrupts */
 
 #define IRQ_WDT		W90X900_IRQ(1)
+#define IRQ_GROUP0	W90X900_IRQ(2)
+#define IRQ_GROUP1	W90X900_IRQ(3)
+#define IRQ_ACTL	W90X900_IRQ(4)
+#define IRQ_LCD		W90X900_IRQ(5)
+#define IRQ_RTC		W90X900_IRQ(6)
 #define IRQ_UART0	W90X900_IRQ(7)
 #define IRQ_UART1	W90X900_IRQ(8)
 #define IRQ_UART2	W90X900_IRQ(9)
@@ -39,7 +42,45 @@
 #define IRQ_TIMER0	W90X900_IRQ(12)
 #define IRQ_TIMER1	W90X900_IRQ(13)
 #define IRQ_T_INT_GROUP	W90X900_IRQ(14)
+#define IRQ_USBH	W90X900_IRQ(15)
+#define IRQ_EMCTX	W90X900_IRQ(16)
+#define IRQ_EMCRX	W90X900_IRQ(17)
+#define IRQ_GDMAGROUP	W90X900_IRQ(18)
+#define IRQ_DMAC	W90X900_IRQ(19)
+#define IRQ_FMI		W90X900_IRQ(20)
+#define IRQ_USBD	W90X900_IRQ(21)
+#define IRQ_ATAPI	W90X900_IRQ(22)
+#define IRQ_G2D		W90X900_IRQ(23)
+#define IRQ_PCI		W90X900_IRQ(24)
+#define IRQ_SCGROUP	W90X900_IRQ(25)
+#define IRQ_I2CGROUP	W90X900_IRQ(26)
+#define IRQ_SSP		W90X900_IRQ(27)
+#define IRQ_PWM		W90X900_IRQ(28)
+#define IRQ_KPI		W90X900_IRQ(29)
+#define IRQ_P2SGROUP	W90X900_IRQ(30)
 #define IRQ_ADC		W90X900_IRQ(31)
 #define NR_IRQS		(IRQ_ADC+1)
 
+/*for irq group*/
+
+#define	IRQ_PS2_PORT0	0x10000000
+#define	IRQ_PS2_PORT1	0x20000000
+#define	IRQ_I2C_LINE0	0x04000000
+#define	IRQ_I2C_LINE1	0x08000000
+#define	IRQ_SC_CARD0	0x01000000
+#define	IRQ_SC_CARD1	0x02000000
+#define	IRQ_GDMA_CH0	0x00100000
+#define	IRQ_GDMA_CH1	0x00200000
+#define	IRQ_TIMER2	0x00010000
+#define	IRQ_TIMER3	0x00020000
+#define	IRQ_TIMER4	0x00040000
+#define	IRQ_GROUP0_IRQ0	0x00000001
+#define	IRQ_GROUP0_IRQ1	0x00000002
+#define	IRQ_GROUP0_IRQ2	0x00000004
+#define	IRQ_GROUP0_IRQ3	0x00000008
+#define	IRQ_GROUP1_IRQ4	0x00000010
+#define	IRQ_GROUP1_IRQ5	0x00000020
+#define	IRQ_GROUP1_IRQ6	0x00000040
+#define	IRQ_GROUP1_IRQ7	0x00000080
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h
index 79320ebe614..1a209530411 100644
--- a/arch/arm/mach-w90x900/include/mach/map.h
+++ b/arch/arm/mach-w90x900/include/mach/map.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/map.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -34,7 +32,6 @@
  * interrupt controller is the first thing we put in, to make
  * the assembly code for the irq detection easier
  */
-
 #define W90X900_VA_IRQ		W90X900_ADDR(0x00000000)
 #define W90X900_PA_IRQ		(0xB8002000)
 #define W90X900_SZ_IRQ		SZ_4K
@@ -44,33 +41,117 @@
 #define W90X900_SZ_GCR		SZ_4K
 
 /* Clock and Power management */
-
 #define W90X900_VA_CLKPWR	(W90X900_VA_GCR+0x200)
 #define W90X900_PA_CLKPWR	(0xB0000200)
 #define W90X900_SZ_CLKPWR	SZ_4K
 
 /* EBI management */
-
 #define W90X900_VA_EBI		W90X900_ADDR(0x00001000)
 #define W90X900_PA_EBI		(0xB0001000)
 #define W90X900_SZ_EBI		SZ_4K
 
 /* UARTs */
-
 #define W90X900_VA_UART		W90X900_ADDR(0x08000000)
 #define W90X900_PA_UART		(0xB8000000)
 #define W90X900_SZ_UART		SZ_4K
 
 /* Timers */
-
 #define W90X900_VA_TIMER	W90X900_ADDR(0x08001000)
 #define W90X900_PA_TIMER	(0xB8001000)
 #define W90X900_SZ_TIMER	SZ_4K
 
 /* GPIO ports */
-
 #define W90X900_VA_GPIO		W90X900_ADDR(0x08003000)
 #define W90X900_PA_GPIO		(0xB8003000)
 #define W90X900_SZ_GPIO		SZ_4K
 
+/* GDMA control */
+#define W90X900_VA_GDMA		W90X900_ADDR(0x00004000)
+#define W90X900_PA_GDMA		(0xB0004000)
+#define W90X900_SZ_GDMA		SZ_4K
+
+/* USB host controller*/
+#define W90X900_VA_USBEHCIHOST	W90X900_ADDR(0x00005000)
+#define W90X900_PA_USBEHCIHOST	(0xB0005000)
+#define W90X900_SZ_USBEHCIHOST	SZ_4K
+
+#define W90X900_VA_USBOHCIHOST	W90X900_ADDR(0x00007000)
+#define W90X900_PA_USBOHCIHOST	(0xB0007000)
+#define W90X900_SZ_USBOHCIHOST	SZ_4K
+
+/* I2C hardware controller */
+#define W90X900_VA_I2C		W90X900_ADDR(0x08006000)
+#define W90X900_PA_I2C		(0xB8006000)
+#define W90X900_SZ_I2C		SZ_4K
+
+/* Keypad Interface*/
+#define W90X900_VA_KPI		W90X900_ADDR(0x08008000)
+#define W90X900_PA_KPI		(0xB8008000)
+#define W90X900_SZ_KPI		SZ_4K
+
+/* Smart card host*/
+#define W90X900_VA_SC		W90X900_ADDR(0x08005000)
+#define W90X900_PA_SC		(0xB8005000)
+#define W90X900_SZ_SC		SZ_4K
+
+/* LCD controller*/
+#define W90X900_VA_LCD		W90X900_ADDR(0x00008000)
+#define W90X900_PA_LCD		(0xB0008000)
+#define W90X900_SZ_LCD		SZ_4K
+
+/* 2D controller*/
+#define W90X900_VA_GE		W90X900_ADDR(0x0000B000)
+#define W90X900_PA_GE		(0xB000B000)
+#define W90X900_SZ_GE		SZ_4K
+
+/* ATAPI */
+#define W90X900_VA_ATAPI	W90X900_ADDR(0x0000A000)
+#define W90X900_PA_ATAPI	(0xB000A000)
+#define W90X900_SZ_ATAPI	SZ_4K
+
+/* ADC */
+#define W90X900_VA_ADC		W90X900_ADDR(0x0800A000)
+#define W90X900_PA_ADC		(0xB800A000)
+#define W90X900_SZ_ADC		SZ_4K
+
+/* PS2 Interface*/
+#define W90X900_VA_PS2		W90X900_ADDR(0x08009000)
+#define W90X900_PA_PS2		(0xB8009000)
+#define W90X900_SZ_PS2		SZ_4K
+
+/* RTC */
+#define W90X900_VA_RTC		W90X900_ADDR(0x08004000)
+#define W90X900_PA_RTC		(0xB8004000)
+#define W90X900_SZ_RTC		SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+#define W90X900_VA_PWM		W90X900_ADDR(0x08007000)
+#define W90X900_PA_PWM		(0xB8007000)
+#define W90X900_SZ_PWM		SZ_4K
+
+/* Audio Controller controller */
+#define W90X900_VA_ACTL		W90X900_ADDR(0x00009000)
+#define W90X900_PA_ACTL		(0xB0009000)
+#define W90X900_SZ_ACTL		SZ_4K
+
+/* DMA controller */
+#define W90X900_VA_DMA		W90X900_ADDR(0x0000c000)
+#define W90X900_PA_DMA		(0xB000c000)
+#define W90X900_SZ_DMA		SZ_4K
+
+/* FMI controller */
+#define W90X900_VA_FMI		W90X900_ADDR(0x0000d000)
+#define W90X900_PA_FMI		(0xB000d000)
+#define W90X900_SZ_FMI		SZ_4K
+
+/* USB Device port */
+#define W90X900_VA_USBDEV	W90X900_ADDR(0x00006000)
+#define W90X900_PA_USBDEV	(0xB0006000)
+#define W90X900_SZ_USBDEV	SZ_4K
+
+/* External MAC control*/
+#define W90X900_VA_EMC		W90X900_ADDR(0x00003000)
+#define W90X900_PA_EMC		(0xB0003000)
+#define W90X900_SZ_EMC		SZ_4K
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
new file mode 100644
index 00000000000..f10b6a8dc06
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers  */
+#define CLK_BA		W90X900_VA_CLKPWR
+#define REG_CLKEN	(CLK_BA + 0x00)
+#define REG_CLKSEL	(CLK_BA + 0x04)
+#define REG_CLKDIV	(CLK_BA + 0x08)
+#define REG_PLLCON0	(CLK_BA + 0x0C)
+#define REG_PLLCON1	(CLK_BA + 0x10)
+#define REG_PMCON	(CLK_BA + 0x14)
+#define REG_IRQWAKECON	(CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG	(CLK_BA + 0x1C)
+#define REG_IPSRST	(CLK_BA + 0x20)
+#define REG_CLKEN1	(CLK_BA + 0x24)
+#define REG_CLKDIV1	(CLK_BA + 0x28)
+
+#endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/include/mach/regs-usb.h
new file mode 100644
index 00000000000..ab74b0c2480
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-usb.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-usb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+/* usb Control Registers  */
+#define USBH_BA		W90X900_VA_USBEHCIHOST
+#define USBD_BA		W90X900_VA_USBDEV
+#define USBO_BA		W90X900_VA_USBOHCIHOST
+
+/* USB Host Control Registers */
+#define REG_UPSCR0	(USBH_BA+0x064)
+#define REG_UPSCR1	(USBH_BA+0x068)
+#define REG_USBPCR0	(USBH_BA+0x0C4)
+#define REG_USBPCR1	(USBH_BA+0x0C8)
+
+/* USBH OHCI Control Registers */
+#define REG_OpModEn	(USBO_BA+0x204)
+/*This bit controls the polarity of over
+*current flag from external power IC.
+*/
+#define OCALow		0x08
+
+#endif /*  __ASM_ARCH_REGS_USB_H */
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 726ff6798a5..7a62bd348e8 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -3,15 +3,13 @@
  *
  * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
  *
- * Copyright (C) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (C) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -80,6 +78,156 @@ static struct platform_device w90p910_flash_device = {
 	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
 };
 
+/* USB EHCI Host Controller */
+
+static struct resource w90x900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+struct platform_device w90x900_device_usb_ehci = {
+	.name		  = "w90x900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
+	.resource	  = w90x900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ehci);
+
+/* USB OHCI Host Controller */
+
+static struct resource w90x900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
+struct platform_device w90x900_device_usb_ohci = {
+	.name		  = "w90x900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
+	.resource	  = w90x900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ohci);
+
+/*TouchScreen controller*/
+
+static struct resource w90x900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_ts = {
+	.name		= "w90x900-ts",
+	.id		= -1,
+	.resource	= w90x900_ts_resource,
+	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
+};
+EXPORT_SYMBOL(w90x900_device_ts);
+
+/* RTC controller*/
+
+static struct resource w90x900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_rtc = {
+	.name		= "w90x900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
+	.resource	= w90x900_rtc_resource,
+};
+EXPORT_SYMBOL(w90x900_device_rtc);
+
+/* KPI controller*/
+
+static struct resource w90x900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device w90x900_device_kpi = {
+	.name		= "w90x900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
+	.resource	= w90x900_kpi_resource,
+};
+EXPORT_SYMBOL(w90x900_device_kpi);
+
+/* USB Device (Gadget)*/
+
+static struct resource w90x900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device w90x900_device_usbgadget = {
+	.name		= "w90x900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
+	.resource	= w90x900_usbgadget_resource,
+};
+EXPORT_SYMBOL(w90x900_device_usbgadget);
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -88,12 +236,18 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_serial_device,
 	&w90p910_flash_device,
+	&w90x900_device_usb_ehci,
+	&w90x900_device_usb_ohci,
+	&w90x900_device_ts,
+	&w90x900_device_rtc,
+	&w90x900_device_kpi,
+	&w90x900_device_usbgadget,
 };
 
 static void __init w90p910evb_map_io(void)
 {
 	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks(0);
+	w90p910_init_clocks();
 }
 
 static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
new file mode 100644
index 00000000000..a3520fefb5e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+static DECLARE_MUTEX(mfp_sem);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
+			mfpen &= (~GPSELC);/*enable kpi*/
+			mfpen |= ENKPI;
+		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
+				mfpen &= (~GPSELC);/*enable nand*/
+				mfpen |= ENNAND;
+			} else
+				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev, int gpio)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+		else if (strcmp(dev_id, "w90p910-atapi") == 0)
+			mfpen |= GPSELEI0;/*enable atapi*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 2bcbaa681b9..1c97e4930b7 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -3,8 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -12,8 +11,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -36,6 +34,7 @@
 #include <mach/regs-serial.h>
 
 #include "cpu.h"
+#include "clock.h"
 
 /* Initial IO mappings */
 
@@ -45,9 +44,52 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(EBI),
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(ADC),
+	IODESC_ENT(RTC),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
 	/*IODESC_ENT(LCD),*/
 };
 
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+
+static struct clk_lookup w90p910_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+};
+
 /* Initial serial platform data */
 
 struct plat_serial8250_port w90p910_uart_data[] = {
@@ -77,8 +119,9 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 
 /*Init W90P910 clock*/
 
-void __init w90p910_init_clocks(int xtal)
+void __init w90p910_init_clocks(void)
 {
+	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
 }
 
 static int __init w90p910_init_cpu(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 20979564e7e..83c025e72ce 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
@@ -416,7 +416,7 @@ config CPU_32v6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -639,10 +639,23 @@ config CPU_BIG_ENDIAN
 	  port must properly enable any big-endian related features
 	  of your chipset/board/processor.
 
+config CPU_ENDIAN_BE8
+	bool
+	depends on CPU_BIG_ENDIAN
+	default CPU_V6 || CPU_V7
+	help
+	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
+
+config CPU_ENDIAN_BE32
+	bool
+	depends on CPU_BIG_ENDIAN
+	default !CPU_ENDIAN_BE8
+	help
+	  Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
+
 config CPU_HIGH_VECTOR
 	depends on !MMU && CPU_CP15 && !CPU_ARM740T
 	bool "Select the High exception vector"
-	default n
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
 	  The exception vector can be vary depending on the platform
@@ -726,7 +739,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 
 config OUTER_CACHE
 	bool
-	default n
 
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
@@ -739,7 +751,6 @@ config CACHE_FEROCEON_L2
 config CACHE_FEROCEON_L2_WRITETHROUGH
 	bool "Force Feroceon L2 cache write through"
 	depends on CACHE_FEROCEON_L2
-	default n
 	help
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
@@ -747,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 6f7e70907e4..f332df7f0d3 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -37,6 +37,9 @@ ENTRY(v6_early_abort)
 	movne	pc, lr
 	do_thumb_abort
 	ldreq	r3, [r2]			@ read aborted ARM instruction
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r3, r3
+#endif
 	do_ldrd_abort
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3be60..0ab75c60f7c 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn,
 	return err;
 }
 
+int ioremap_page(unsigned long virt, unsigned long phys,
+		 const struct mem_type *mtype)
+{
+	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
 
 void __check_kvm_seq(struct mm_struct *mm)
 {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ece00c..fdaa9bb87c1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type)
 {
 	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 }
+EXPORT_SYMBOL(get_mem_type);
 
 /*
  * Adjust the PMD section entries according to the CPU in use.
@@ -839,6 +840,20 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+	if (machine_is_u300()) {
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+		res_size = 0x00100000;
+#endif
+#endif
+	}
+
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 087e239704d..524ddae9259 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -170,6 +170,9 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3397f1e64d7..180a08d03a0 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,17 +19,23 @@
 
 #include "proc-macros.S"
 
-#define TTB_C		(1 << 0)
 #define TTB_S		(1 << 1)
 #define TTB_RGN_NC	(0 << 3)
 #define TTB_RGN_OC_WBWA	(1 << 3)
 #define TTB_RGN_OC_WT	(2 << 3)
 #define TTB_RGN_OC_WB	(3 << 3)
+#define TTB_NOS		(1 << 5)
+#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
 
 #ifndef CONFIG_SMP
-#define TTB_FLAGS	TTB_C|TTB_RGN_OC_WB		@ mark PTWs cacheable, outer WB
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
 #else
-#define TTB_FLAGS	TTB_C|TTB_S|TTB_RGN_OC_WBWA	@ mark PTWs cacheable and shared, outer WBWA
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
 #endif
 
 ENTRY(cpu_v7_proc_init)
@@ -176,31 +182,45 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
-	orr	r0, r0, #(0x1 << 6)
+	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode and
+	orr	r0, r0, #(1 << 6) | (1 << 0)	@ TLB ops broadcasting
 	mcr	p15, 0, r0, c1, c0, 1
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+
+	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
+	and	r10, r0, #0xff000000		@ ARM?
+	teq	r10, #0x41000000
+	bne	2f
+	and	r5, r0, #0x00f00000		@ variant
+	and	r6, r0, #0x0000000f		@ revision
+	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+
 #ifdef CONFIG_ARM_ERRATA_430973
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 6)		@ set IBE to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r5, #0x00100000			@ only present in r1p*
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 6)		@ set IBE to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
-	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
+	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	mrc	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
-	orr	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
-	mcr	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
+	tsteq	r10, #1 << 22
+	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
+	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
-	mov	r10, #0
+
+2:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif
@@ -213,12 +233,43 @@ __v7_setup:
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
-	ldr	r5, =0xff0aa1a8
-	ldr	r6, =0x40e040e0
+	/*
+	 * Memory region attributes with SCTLR.TRE=1
+	 *
+	 *   n = TEX[0],C,B
+	 *   TR = PRRR[2n+1:2n]		- memory type
+	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
+	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
+	 *
+	 *			n	TR	IR	OR
+	 *   UNCACHED		000	00
+	 *   BUFFERABLE		001	10	00	00
+	 *   WRITETHROUGH	010	10	10	10
+	 *   WRITEBACK		011	10	11	11
+	 *   reserved		110
+	 *   WRITEALLOC		111	10	01	01
+	 *   DEV_SHARED		100	01
+	 *   DEV_NONSHARED	100	01
+	 *   DEV_WC		001	10
+	 *   DEV_CACHED		011	10
+	 *
+	 * Other attributes:
+	 *
+	 *   DS0 = PRRR[16] = 0		- device shareable property
+	 *   DS1 = PRRR[17] = 1		- device shareable property
+	 *   NS0 = PRRR[18] = 0		- normal shareable property
+	 *   NS1 = PRRR[19] = 1		- normal shareable property
+	 *   NOS = PRRR[24+n] = 1	- not outer shareable
+	 */
+	ldr	r5, =0xff0a81a8			@ PRRR
+	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
@@ -226,14 +277,14 @@ __v7_setup:
 ENDPROC(__v7_setup)
 
 	/*   AT
-	 *  TFR   EV X F   I D LR
-	 * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+	 *  TFR   EV X F   I D LR    S
+	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
 	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *    1    0 110       0011 1.00 .111 1101 < we want
+	 *    1    0 110       0011 1100 .111 1101 < we want
 	 */
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
+	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
 
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b637e7380ab..a26a605b73b 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -42,9 +42,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	mov	r1, r1, lsl #PAGE_SHIFT
 	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA (was 1)
-	tst	r2, #VM_EXEC			@ Executable area ?
-	mcrne	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA (was 1)
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -69,8 +71,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA
-	mcr	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable)
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -87,5 +92,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
 ENTRY(v7wbi_tlb_fns)
 	.long	v7wbi_flush_user_tlb_range
 	.long	v7wbi_flush_kern_tlb_range
-	.long	v6wbi_tlb_flags
+	.long	v7wbi_tlb_flags
 	.size	v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 386cbd13eaf..d3a6f9298e9 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
 extern unsigned int DoubleCPDO(struct roundingData *roundData,
 			       const unsigned int opcode, FPREG * rFd);
 
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+				 const unsigned int opcode, FPREG * rFd);
+
 #endif
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index 9843dc53304..31c4eeec18b 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -27,10 +27,6 @@
 #include "fpmodule.inl"
 #include "softfloat.h"
 
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 260fe29d73f..13e479c5da5 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
 char floatx80_lt_quiet( floatx80, floatx80 );
 char floatx80_is_signaling_nan( floatx80 );
 
+extern flag floatx80_is_nan(floatx80);
+
 #endif
 
 static inline flag extractFloat32Sign(float32 a)
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 853d42bb868..4ce0f9801e2 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -41,6 +41,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
+#include <mach/board-eb.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e9906d5..8986b741223 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR
 config MXC_PWM
 	tristate "Enable PWM driver"
 	depends on ARCH_MXC
+	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config ARCH_HAS_RNGA
+	bool
+	depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+	bool
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 055406312b6..e3212c8ff42 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e95798cc3..7506d963be4 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq)
 	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
 }
 
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
 static int gpio_set_irq_type(u32 irq, u32 type)
 {
 	u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	int edge;
 	void __iomem *reg = port->base;
 
+	port->both_edges &= ~(1 << (gpio & 31));
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = mxc_gpio_get(&port->chip, gpio & 31);
+		if (val) {
+			edge = GPIO_INT_LOW_LEV;
+			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+		} else {
+			edge = GPIO_INT_HIGH_LEV;
+			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+		}
+		port->both_edges |= 1 << (gpio & 31);
+		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
+	default:
 		return -EINVAL;
 	}
 
@@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	return 0;
 }
 
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+	void __iomem *reg = port->base;
+	u32 bit, val;
+	int edge;
+
+	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+	bit = gpio & 0xf;
+	val = __raw_readl(reg);
+	edge = (val >> (bit << 1)) & 3;
+	val &= ~(0x3 << (bit << 1));
+	switch (edge) {
+	case GPIO_INT_HIGH_LEV:
+		edge = GPIO_INT_LOW_LEV;
+		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+		break;
+	case GPIO_INT_LOW_LEV:
+		edge = GPIO_INT_HIGH_LEV;
+		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+		break;
+	default:
+		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+		       gpio, edge);
+		return;
+	}
+	__raw_writel(val | (edge << (bit << 1)), reg);
+}
+
 /* handle n interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
@@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 
 	gpio_irq_no = port->virtual_irq_start;
 	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+		u32 gpio = irq_to_gpio(gpio_irq_no);
 
 		if ((irq_stat & 1) == 0)
 			continue;
 
 		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+		if (port->both_edges & (1 << (gpio & 31)))
+			mxc_flip_edge(port, gpio);
+
 		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
 				&irq_desc[gpio_irq_no]);
 	}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
new file mode 100644
index 00000000000..8769e910e55
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 00000000000..06701df74c4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
new file mode 100644
index 00000000000..a870f8ea244
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 00000000000..552b55d714d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72ada13..06e6895f7f6 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
new file mode 100644
index 00000000000..78cf31e22e4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LILLY_NOBOARD	= 0,
+	MX31LILLY_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7d..52fbdf2d6f2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_MAX_EXP_IO_LINES	16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE		SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE	SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1babb7..303fd2434a2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316d0f5..519bab3eb28 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
 #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
new file mode 100644
index 00000000000..1111037d6d9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8f..f0a1fa1938a 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90..4fcd7499e09 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
new file mode 100644
index 00000000000..15fbdf16abc
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762dd45c..04033ec637d 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72644d..02c3cd004db 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
 struct platform_device;
 struct clk;
 
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk);
 extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f773148bc2..bbc5f6753cf 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
 #ifdef CONFIG_MACH_MX27ADS
 #include <mach/board-mx27ads.h>
 #endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
 #endif
@@ -34,6 +37,21 @@
 #ifdef CONFIG_MACH_QONG
 #include <mach/board-qong.h>
 #endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1090f..894d2f87c85 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@ struct mxc_gpio_port {
 	int irq;
 	int virtual_irq_start;
 	struct gpio_chip chip;
+	u32 both_edges;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 599217b2e13..4adec9b154d 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -20,11 +20,16 @@
 #define ASMARM_ARCH_UART_H
 
 #define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
 	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
 	unsigned int flags;
+	void (*irda_enable)(int enable);
+	unsigned int irda_inv_rx:1;
+	unsigned int irda_inv_tx:1;
+	unsigned short transceiver_delay;
 };
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0430e..9f0101157ec 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@ struct imx_fb_platform_data {
 	u_char * fixed_screen_cpu;
 	dma_addr_t fixed_screen_dma;
 
-	int (*init)(struct platform_device*);
-	int (*exit)(struct platform_device*);
+	int (*init)(struct platform_device *);
+	void (*exit)(struct platform_device *);
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a1fd3..27f8d1b2bc6 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@ enum iomux_gp_func {
  * 	- setups the iomux according to the configuration
  * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
@@ -633,6 +633,40 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 00000000000..00b0ac1db22
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*									  PAD    MUX   ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1				IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K				IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4				IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2				IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO				IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5				IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6				IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0				IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1				IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO				IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0				IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0				IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B				IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO					IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8					IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY				IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7					IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10					IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16				IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17				IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18				IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19				IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20				IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21				IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22				IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23				IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24				IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25				IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0				IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1				IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2				IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3				IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4				IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5				IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6				IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7				IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8				IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9				IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10				IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11				IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12				IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13				IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14				IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15				IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16				IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17				IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18				IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19				IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20				IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21				IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22				IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23				IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24				IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25				IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26				IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27				IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28				IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29				IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30				IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31				IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE					IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0				IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1				IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3				IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2				IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3				IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4				IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B				IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1				IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20					IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5				IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2					IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2					IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2				IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21					IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22				IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB				IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA				IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW					IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS				IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS				IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18				IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19				IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20				IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21				IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22				IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB				IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD				IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23					IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15				IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14				IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13				IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12				IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11				IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10				IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9				IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8				IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7				IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6				IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5				IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4				IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3				IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2				IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1				IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0				IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0				IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20				IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1				IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21				IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2				IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22				IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3				IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23				IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0				IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24				IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1				IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25				IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2				IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26				IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3				IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27				IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28				IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24				IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25				IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26				IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27				IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28				IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29				IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30					IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31				IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI				IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0					IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO				IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1					IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK				IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2					IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY				IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3				IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR				IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4					IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR					IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5					IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR				IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0				IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6					IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT				IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7					IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0				IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2				IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST					IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8					IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1				IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3					IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT				IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9					IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2				IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3				IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR				IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10				IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR				IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11				IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL				IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12				IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA				IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13				IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0				IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1					IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY				IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2					IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3				IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI					IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14					IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6				IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1					IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0					IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3					IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B				IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD					IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15					IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7				IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2					IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX				IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI				IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4				IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6					IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX				IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO				IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5				IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7					IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS				IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK				IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL					IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0				IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6				IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8					IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS				IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY				IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA					IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1				IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7				IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9					IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX				IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4				IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10					IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX				IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5				IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11					IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS				IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN				IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2				IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6				IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12					IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX				IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS				IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN				IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3				IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7				IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13					IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX				IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK					IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS					IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI					IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO					IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB				IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B					IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD				IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15				IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0					IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1					IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2					IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3					IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4					IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5					IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6					IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7					IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8					IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10					IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11					IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12					IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13					IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14					IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15					IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16					IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2				IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17					IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD				IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24					IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1				IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK				IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25					IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0				IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0				IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26					IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1				IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27					IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR				IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2				IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28					IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD				IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3				IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29					IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30				IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0				IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1				IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2				IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3				IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4				IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5				IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6				IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS				IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7				IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8				IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9				IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10				IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11				IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL				IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0				IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA				IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1				IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2				IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3				IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS				IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4				IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS				IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5				IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0				IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6				IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1				IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7				IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8				IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9				IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10				IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12				IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13				IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14				IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15				IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6e8, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6e8, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6e8, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17				IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18				IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR				IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19				IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR				IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20				IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS				IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI				IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21				IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS				IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD				IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22				IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23				IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24				IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25				IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26				IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27				IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28				IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0				IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1				IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0				IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1				IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2				IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1				IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2				IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3				IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2				IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3				IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4				IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5				IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL				IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS				IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY				IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9				IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI				IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC				IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD				IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13				IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14				IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS				IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5				IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17				IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 00000000000..7cd84547658
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+	unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+	unsigned mux_mode:8;
+	unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define	NO_PAD_CTRL	(1 << 16)
+	unsigned pad_ctrl:17;
+	unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+	unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+		_select_input, _pad_ctrl)				\
+		{							\
+			.mux_ctrl_ofs     = _mux_ctrl_ofs,		\
+			.mux_mode         = _mux_mode,			\
+			.pad_ctrl_ofs     = _pad_ctrl_ofs,		\
+			.pad_ctrl         = _pad_ctrl,			\
+			.select_input_ofs = _select_input_ofs,		\
+			.select_input     = _select_input,		\
+		}
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
+
+#define PAD_CTL_NO_HYSTERESIS		0
+#define PAD_CTL_HYSTERESIS		1
+
+#define PAD_CTL_PULL_DISABLED		0x0
+#define PAD_CTL_PULL_KEEPER		0xa
+#define PAD_CTL_PULL_DOWN_100K		0xc
+#define PAD_CTL_PULL_UP_47K		0xd
+#define PAD_CTL_PULL_UP_100K		0xe
+#define PAD_CTL_PULL_UP_22K		0xf
+
+#define PAD_CTL_OUTPUT_CMOS		0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM	0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
+#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+
+#define PAD_CTL_SLEW_RATE_SLOW		0
+#define PAD_CTL_SLEW_RATE_FAST		1
+
+/*
+ * setups a single pad:
+ * 	- reserves the pad so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * 	- make it available for a future use by another driver
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f3f..6065e00176e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define CONSISTENT_DMA_SIZE SZ_4M
 #endif /* CONFIG_MX1_VIDEO */
 
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e02324d8..1000bf330bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c6085d5..b559a4bb576 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
 #define CS4_SIZE		SZ_32M
 
 #define CS5_BASE_ADDR		0xB6000000
+#define CS5_BASE_ADDR_VIRT	0xF6000000
+#define CS5_SIZE		SZ_32M
+
 #define PCMCIA_MEM_BASE_ADDR	0xBC000000
 
 /*
@@ -191,6 +194,9 @@
 #define CS4_IO_ADDRESS(x)  \
 	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
 
+#define CS5_IO_ADDRESS(x)  \
+	(((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
 #define X_MEMC_IO_ADDRESS(x)  \
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a134744..00000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT		TIM1_INT
-
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_CLK_TIN		(3<<1)
-#define TCTL_CLK_32		(4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG		(1<<6)
-#define TCTL_FRR		(1<<9)
-#define TCTL_WAITEN		(1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1		(1<<0)
-#define TSTAT_OF2		(1<<1)
-#define TSTAT_OF3		(1<<2)
-#define TSTAT_IF1		(1<<3)
-#define TSTAT_IF2		(1<<4)
-#define TSTAT_ROV		(1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR		(1<<15)
-#define TCTL_CC			(1<<10)
-#define TCTL_OM			(1<<9)
-#define TCTL_CAP_RIS		(1<<6)
-#define TCTL_CAP_FAL		(2<<6)
-#define TCTL_CAP_RIS_FAL	(3<<6)
-#define TCTL_CAP_ENA		(1<<5)
-#define TCTL_TEN		(1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb3086f1..be273371f34 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
 
 struct imxusb_platform_data {
 	int (*init)(struct device *);
-	int (*exit)(struct device *);
+	void (*exit)(struct device *);
 };
 
 #endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 00000000000..77a078f9513
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+		return -EBUSY;
+	if (pad->mux_ctrl_ofs)
+		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+	if (pad->select_input_ofs)
+		__raw_writel(pad->select_input,
+				IOMUX_BASE + pad->select_input_ofs);
+
+	if (!(pad->pad_ctrl & NO_PAD_CTRL))
+		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_v3_setup_pad(p);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_v3_release_multiple_pads(pad_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_v3_release_pad(p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a531f5..8aee76304f8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 
-#define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
-#define AVIC_NIMASK		(AVIC_BASE + 0x04)	/* int mask reg */
-#define AVIC_INTENNUM		(AVIC_BASE + 0x08)	/* int enable number reg */
-#define AVIC_INTDISNUM		(AVIC_BASE + 0x0C)	/* int disable number reg */
-#define AVIC_INTENABLEH		(AVIC_BASE + 0x10)	/* int enable reg high */
-#define AVIC_INTENABLEL		(AVIC_BASE + 0x14)	/* int enable reg low */
-#define AVIC_INTTYPEH		(AVIC_BASE + 0x18)	/* int type reg high */
-#define AVIC_INTTYPEL		(AVIC_BASE + 0x1C)	/* int type reg low */
-#define AVIC_NIPRIORITY(x)	(AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR		(AVIC_BASE + 0x40)	/* norm int vector/status */
-#define AVIC_FIVECSR		(AVIC_BASE + 0x44)	/* fast int vector/status */
-#define AVIC_INTSRCH		(AVIC_BASE + 0x48)	/* int source reg high */
-#define AVIC_INTSRCL		(AVIC_BASE + 0x4C)	/* int source reg low */
-#define AVIC_INTFRCH		(AVIC_BASE + 0x50)	/* int force reg high */
-#define AVIC_INTFRCL		(AVIC_BASE + 0x54)	/* int force reg low */
-#define AVIC_NIPNDH		(AVIC_BASE + 0x58)	/* norm int pending high */
-#define AVIC_NIPNDL		(AVIC_BASE + 0x5C)	/* norm int pending low */
-#define AVIC_FIPNDH		(AVIC_BASE + 0x60)	/* fast int pending high */
-#define AVIC_FIPNDL		(AVIC_BASE + 0x64)	/* fast int pending low */
-
-#define SYSTEM_PREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH		3
-#define IIM_PROD_REV_LEN	5
+#define AVIC_INTCNTL		0x00	/* int control reg */
+#define AVIC_NIMASK		0x04	/* int mask reg */
+#define AVIC_INTENNUM		0x08	/* int enable number reg */
+#define AVIC_INTDISNUM		0x0C	/* int disable number reg */
+#define AVIC_INTENABLEH		0x10	/* int enable reg high */
+#define AVIC_INTENABLEL		0x14	/* int enable reg low */
+#define AVIC_INTTYPEH		0x18	/* int type reg high */
+#define AVIC_INTTYPEL		0x1C	/* int type reg low */
+#define AVIC_NIPRIORITY(x)	(0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR		0x40	/* norm int vector/status */
+#define AVIC_FIVECSR		0x44	/* fast int vector/status */
+#define AVIC_INTSRCH		0x48	/* int source reg high */
+#define AVIC_INTSRCL		0x4C	/* int source reg low */
+#define AVIC_INTFRCH		0x50	/* int force reg high */
+#define AVIC_INTFRCL		0x54	/* int force reg low */
+#define AVIC_NIPNDH		0x58	/* norm int pending high */
+#define AVIC_NIPNDL		0x5C	/* norm int pending low */
+#define AVIC_FIPNDH		0x60	/* fast int pending high */
+#define AVIC_FIPNDL		0x64	/* fast int pending low */
+
+static void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 	if (irq >= MXC_INTERNAL_IRQS)
 		return -EINVAL;;
 
-	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
-	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
 
 	return 0;
 #else
@@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	if (irq < MXC_INTERNAL_IRQS / 2) {
-		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
 	} else {
 		irq -= MXC_INTERNAL_IRQS / 2;
-		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
@@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq);
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTDISNUM);
+	__raw_writel(irq, avic_base + AVIC_INTDISNUM);
 }
 
 /* Enable interrupt number "irq" in the AVIC */
 static void mxc_unmask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTENNUM);
+	__raw_writel(irq, avic_base + AVIC_INTENNUM);
 }
 
 static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@ void __init mxc_init_irq(void)
 {
 	int i;
 
+	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
-	__raw_writel(0, AVIC_INTCNTL);
-	__raw_writel(0x1f, AVIC_NIMASK);
+	__raw_writel(0, avic_base + AVIC_INTCNTL);
+	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
 
 	/* disable all interrupts */
-	__raw_writel(0, AVIC_INTENABLEH);
-	__raw_writel(0, AVIC_INTENABLEL);
+	__raw_writel(0, avic_base + AVIC_INTENABLEH);
+	__raw_writel(0, avic_base + AVIC_INTENABLEL);
 
 	/* all IRQ no FIQ */
-	__raw_writel(0, AVIC_INTTYPEH);
-	__raw_writel(0, AVIC_INTTYPEL);
+	__raw_writel(0, avic_base + AVIC_INTTYPEH);
+	__raw_writel(0, avic_base + AVIC_INTTYPEL);
 	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
 		set_irq_chip(i, &mxc_avic_chip);
 		set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@ void __init mxc_init_irq(void)
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
-		__raw_writel(0, AVIC_NIPRIORITY(i));
+		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
@@ -154,3 +152,4 @@ void __init mxc_init_irq(void)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc507cc..ae34198a79d 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC    0x00   /* PWM Control Register */
+#define MX1_PWMS    0x04   /* PWM Sample Register */
+#define MX1_PWMP    0x08   /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR                 0x00    /* PWM Control Register */
+#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
+#define MX3_PWMPR                 0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN              (1 << 0)
+
 
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Sample Register		*/
-#define PWMPR	0x08	/* PWM Period Register		*/
-#define PWMCNR	0x0C	/* PWM Counter Register		*/
-
-#define PWMCR_HCTR		(1 << 18)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 17)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_SWR		(1 << 16)		/* Software Reset		*/
-#define PWMCR_CLKSRC_PERCLK	(0 << 15)		/* PERCLK Clock Source		*/
-#define PWMCR_CLKSRC_CLK32	(1 << 15)		/* 32KHz Clock Source		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMCR_IRQ		(1 << 7)		/* Interrupt Request		*/
-#define PWMCR_IRQEN		(1 << 6)		/* Interrupt Request Enable	*/
-#define PWMCR_FIFOAV		(1 << 5)		/* FIFO Available		*/
-#define PWMCR_EN		(1 << 4)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMCR_DIV(x)		(((x) & 0x03) << 0)	/* Clock divider 2/4/8/16	*/
-
-#define MAX_DIV			(128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Status Register		*/
-#define PWMIR	0x08	/* PWM Interrupt Register	*/
-#define PWMSAR	0x0C	/* PWM Sample Register		*/
-#define PWMPR	0x10	/* PWM Period Register		*/
-#define PWMCNR	0x14	/* PWM Counter Register		*/
-
-#define PWMCR_EN		(1 << 0)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 1)	/* Sample Repeats		*/
-#define PWMCR_SWR		(1 << 3)		/* Software Reset		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)/* PRESCALER			*/
-#define PWMCR_CLKSRC(x)		(((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF	(0 << 16)
-#define PWMCR_CLKSRC_IPG	(1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
-#define PWMCR_CLKSRC_CLK32	(3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR		(1 << 20)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 21)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_DBGEN		(1 << 22)		/* Debug Mode			*/
-#define PWMCR_WAITEN		(1 << 23)		/* Wait Mode			*/
-#define PWMCR_DOZEN		(1 << 24)		/* Doze Mode			*/
-#define PWMCR_STOPEN		(1 << 25)		/* Stop Mode			*/
-#define PWMCR_FWM(x)		(((x) & 0x3) << 26)	/* FIFO Water Mark		*/
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
 
 struct pwm_device {
 	struct list_head	node;
@@ -91,32 +52,52 @@ struct pwm_device {
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 {
-	unsigned long long c;
-	unsigned long period_cycles, duty_cycles, prescale;
-
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	prescale = period_cycles / 0x10000 + 1;
-
-	period_cycles /= prescale;
-	c = (unsigned long long)period_cycles * duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-#ifdef PWM_VER_2
-	writel(duty_cycles, pwm->mmio_base + PWMSAR);
-	writel(period_cycles, pwm->mmio_base + PWMPR);
-	writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
-			pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+	if (cpu_is_mx27() || cpu_is_mx3()) {
+		unsigned long long c;
+		unsigned long period_cycles, duty_cycles, prescale;
+		c = clk_get_rate(pwm->clk);
+		c = c * period_ns;
+		do_div(c, 1000000000);
+		period_cycles = c;
+
+		prescale = period_cycles / 0x10000 + 1;
+
+		period_cycles /= prescale;
+		c = (unsigned long long)period_cycles * duty_ns;
+		do_div(c, period_ns);
+		duty_cycles = c;
+
+		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+			pwm->mmio_base + MX3_PWMCR);
+	} else if (cpu_is_mx1() || cpu_is_mx21()) {
+		/* The PWM subsystem allows for exact frequencies. However,
+		 * I cannot connect a scope on my device to the PWM line and
+		 * thus cannot provide the program the PWM controller
+		 * exactly. Instead, I'm relying on the fact that the
+		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+		 * function group already. So I'll just modify the PWM sample
+		 * register to follow the ratio of duty_ns vs. period_ns
+		 * accordingly.
+		 *
+		 * This is good enought for programming the brightness of
+		 * the LCD backlight.
+		 *
+		 * The real implementation would divide PERCLK[0] first by
+		 * both the prescaler (/1 .. /128) and then by CLKSEL
+		 * (/2 .. /16).
+		 */
+		u32 max = readl(pwm->mmio_base + MX1_PWMP);
+		u32 p = max * duty_ns / period_ns;
+		writel(max - p, pwm->mmio_base + MX1_PWMS);
+	} else {
+		BUG();
+	}
 
 	return 0;
 }
@@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357196f..88fb3a57e02 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL		0x00
+#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TPRER		0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1	(1 << 1)
+#define MX1_2_TCTL_IRQEN	(1 << 4)
+#define MX1_2_TCTL_FRR		(1 << 8)
+#define MX1_2_TCMP		0x08
+#define MX1_2_TCN		0x10
+#define MX1_2_TSTAT		0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT		(1 << 1)
+#define MX2_TSTAT_COMP		(1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN		(1 << 3)
+#define MX3_TCTL_CLK_IPG	(1 << 6)
+#define MX3_TCTL_FRR		(1 << 9)
+#define MX3_IR			0x0c
+#define MX3_TSTAT		0x08
+#define MX3_TSTAT_OF1		(1 << 0)
+#define MX3_TCN			0x24
+#define MX3_TCMP		0x10
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source */
+static void __iomem *timer_base;
 
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
 {
-	return __raw_readl(TIMER_BASE + MXC_TCN);
+	unsigned int tmp;
+
+	if (cpu_is_mx3())
+		__raw_writel(0, timer_base + MX3_IR);
+	else {
+		tmp = __raw_readl(timer_base + MXC_TCTL);
+		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+	}
+}
+
+static inline void gpt_irq_enable(void)
+{
+	if (cpu_is_mx3())
+		__raw_writel(1<<0, timer_base + MX3_IR);
+	else {
+		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+			timer_base + MXC_TCTL);
+	}
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	if (cpu_is_mx1())
+		__raw_writel(0, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx2())
+		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx3())
+		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX3_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mxc_get_cycles,
+	.read		= mx1_2_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift 		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clocksource_mxc.read = mx3_get_cycles;
+
 	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 /* clock event */
 
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
 			      struct clock_event_device *unused)
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
-	__raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+	tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
 
-	return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+	__raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+				-ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+	__raw_writel(tcmp, timer_base + MX3_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
 				-ETIME : 0;
 }
 
@@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		__raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
-				TIMER_BASE + MXC_TCMP);
+		if (cpu_is_mx3())
+			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+					timer_base + MX3_TCMP);
+		else
+			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+					timer_base + MX1_2_TCMP);
+
 		/* Clear pending interrupt */
 		gpt_irq_acknowledge();
 	}
@@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+	if (cpu_is_mx3())
+		tstat = __raw_readl(timer_base + MX3_TSTAT);
+	else
+		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
 	gpt_irq_acknowledge();
 
@@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = {
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_mode	= mxc_set_mode,
-	.set_next_event	= mxc_set_next_event,
+	.set_next_event	= mx1_2_set_next_event,
 	.rating		= 200,
 };
 
@@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clockevent_mxc.set_next_event = mx3_set_next_event;
+
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 
 void __init mxc_timer_init(struct clk *timer_clk)
 {
+	uint32_t tctl_val;
+	int irq;
+
 	clk_enable(timer_clk);
 
+	if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+		irq = TIM1_INT;
+#endif
+	} else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT1;
+#endif
+	} else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT;
+#endif
+	} else
+		BUG();
+
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
 	 */
-	__raw_writel(0, TIMER_BASE + MXC_TCTL);
-	__raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
 
-	__raw_writel(TCTL_FRR |	/* free running */
-		     TCTL_VAL |	/* set clocksource and arch specific bits */
-		     TCTL_TEN,	/* start the timer */
-		     TIMER_BASE + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+	if (cpu_is_mx3())
+		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+	else
+		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+	__raw_writel(tctl_val, timer_base + MXC_TCTL);
 
 	/* init and register the timer to the framework */
 	mxc_clocksource_init(timer_clk);
 	mxc_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
-	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+	setup_irq(irq, &mxc_timer_irq);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 9dd68fafb37..efe85d09519 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@ config ARCH_OMAP3
 	select CPU_V7
 	select COMMON_CLKDEV
 
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	select CPU_V7
+	select ARM_GIC
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS
 config OMAP_DEBUG_POWERDOMAIN
 	bool "Emit debug messages from powerdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in powerdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN
 config OMAP_DEBUG_CLOCKDOMAIN
 	bool "Emit debug messages from clockdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in clockdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -110,11 +113,13 @@ config OMAP_MCBSP
 config OMAP_MBOX_FWK
 	tristate "Mailbox framework support"
 	depends on ARCH_OMAP
-	default n
 	help
 	  Say Y here if you want to use OMAP Mailbox framework support for
 	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
@@ -128,13 +133,13 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX and 34XX.
+	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
 endchoice
 
@@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
@@ -171,7 +176,7 @@ endchoice
 
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
-	depends on OMAP_MUX
+	depends on ARCH_OMAP1 && OMAP_MUX
 	default y
 	help
 	  Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100cfb8e..a8327952395 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@ obj-  :=
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc279287..e8c327a45a5 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
+	if (cpu_is_omap44xx())
+		/* OMAP4 clk framework not supported yet */
+		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
@@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret = -EINVAL;
 
+	if (cpu_is_omap44xx())
+	/* OMAP4 clk framework not supported yet */
+		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -240,13 +273,13 @@ void recalculate_root_clocks(void)
 }
 
 /**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
  * @clk: struct clk * to initialize
  *
  * Initialize any struct clk fields needed before normal clk initialization
  * can run.  No return value.
  */
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
 {
 	INIT_LIST_HEAD(&clk->children);
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f3d7c..ebcf006406f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
  * linux/arch/arm/plat-omap/common.c
  *
  * Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/console.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
@@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console);
  * but systems won't necessarily want to spend resources that way.
  */
 
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#ifdef	TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+	return 0;
 }
 
 static struct clocksource clocksource_32k = {
 	.name		= "32k_counter",
 	.rating		= 250,
-	.read		= omap_32k_read,
+	.read		= omap_32k_read_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }
@@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		struct clk *sync_32k_ick;
 
+		if (cpu_is_omap16xx())
+			clocksource_32k.read = omap16xx_32k_read;
+		else if (cpu_is_omap2420())
+			clocksource_32k.read = omap2420_32k_read;
+		else if (cpu_is_omap2430())
+			clocksource_32k.read = omap2430_32k_read;
+		else if (cpu_is_omap34xx())
+			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
+		else
+			return -ENODEV;
+
 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
 		if (sync_32k_ick)
 			clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void)
 }
 arch_initcall(omap_init_clocksource_32k);
 
-#endif	/* TIMER_32K_SYNCHRONIZED */
+#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
 
 /* Global address base setup code */
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
 	omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = {
 
 void __init omap2_set_globals_242x(void)
 {
-	omap2_globals = &omap242x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap242x_globals);
 }
 #endif
 
@@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = {
 
 void __init omap2_set_globals_243x(void)
 {
-	omap2_globals = &omap243x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap243x_globals);
 }
 #endif
 
@@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = {
 
 void __init omap2_set_globals_343x(void)
 {
-	omap2_globals = &omap343x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff4179..a64b692a1bf 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
 		wdt_resources[0].start = 0x49016000; /* WDT2 */
 	else if (cpu_is_omap343x())
 		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else if (cpu_is_omap44xx())
+		wdt_resources[0].start = 0x4a314000;
 	else
 		return;
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c045ad5..def14ec265b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * Support functions for the OMAP internal DMA channels.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
-	u16 w;
-
 	BUG_ON(omap_dma_in_1510_mode());
 
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
-		return;
-	}
+	if (cpu_class_is_omap1()) {
+		u16 w;
 
-	w = dma_read(CCR2(lch));
-	w &= ~0x03;
+		w = dma_read(CCR2(lch));
+		w &= ~0x03;
 
-	switch (mode) {
-	case OMAP_DMA_CONSTANT_FILL:
-		w |= 0x01;
-		break;
-	case OMAP_DMA_TRANSPARENT_COPY:
-		w |= 0x02;
-		break;
-	case OMAP_DMA_COLOR_DIS:
-		break;
-	default:
-		BUG();
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			w |= 0x01;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			w |= 0x02;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(w, CCR2(lch));
+
+		w = dma_read(LCH_CTRL(lch));
+		w &= ~0x0f;
+		/* Default is channel type 2D */
+		if (mode) {
+			dma_write((u16)color, COLOR_L(lch));
+			dma_write((u16)(color >> 16), COLOR_U(lch));
+			w |= 1;		/* Channel type G */
+		}
+		dma_write(w, LCH_CTRL(lch));
 	}
-	dma_write(w, CCR2(lch));
 
-	w = dma_read(LCH_CTRL(lch));
-	w &= ~0x0f;
-	/* Default is channel type 2D */
-	if (mode) {
-		dma_write((u16)color, COLOR_L(lch));
-		dma_write((u16)(color >> 16), COLOR_U(lch));
-		w |= 1;		/* Channel type G */
+	if (cpu_class_is_omap2()) {
+		u32 val;
+
+		val = dma_read(CCR(lch));
+		val &= ~((1 << 17) | (1 << 16));
+
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			val |= 1 << 16;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			val |= 1 << 17;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(val, CCR(lch));
+
+		color &= 0xffffff;
+		dma_write(color, COLOR(lch));
 	}
-	dma_write(w, LCH_CTRL(lch));
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
 
@@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = dma_read(CCR(lch));
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int chain_id, u16 ch_status,
+			   void (*callback) (int lch, u16 ch_status,
 					     void *data),
 			   int *chain_id, int no_of_chans, int chain_mode,
 			   struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 static int omap2_dma_handle_ch(int ch)
 {
@@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void)
 	} else if (cpu_is_omap34xx()) {
 		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap44xx()) {
+		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
@@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void)
 		}
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
-	if (cpu_class_is_omap2())
-		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+	if (cpu_class_is_omap2()) {
+		int irq;
+		if (cpu_is_omap44xx())
+			irq = INT_44XX_SDMA_IRQ0;
+		else
+			irq = INT_24XX_SDMA_IRQ0;
+		setup_irq(irq, &omap24xx_dma_irq);
+	}
 
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb9963129..7f50b6103de 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
  * OMAP2 support by Juha Yrjola
  * API improvements and OMAP2 clock framework support by Timo Teras
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 	struct clk *iclk, *fclk;
 #endif
 	void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap2_dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
 static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 
 #elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 #define omap2_dm_timers			NULL
 #define omap2_dm_source_names		NULL
 #define omap2_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
 static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x)		clk_enable(x)
+#define omap_dm_clk_disable(x)		clk_disable(x)
+#define omap1_dm_timers			NULL
+#define omap2_dm_timers			NULL
+#define omap2_dm_source_names		NULL
+#define omap2_dm_source_clocks		NULL
+#define omap3_dm_timers			NULL
+#define omap3_dm_source_names		NULL
+#define omap3_dm_source_clocks		NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+	{ .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+	{ .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+	{ .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+	{ .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+	{ .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+	{ .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+	{ .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+	{ .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+	{ .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+	{ .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+	"sys_ck",
+	"omap_32k_fck",
+	NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
 #else
 
 #error OMAP architecture not supported!
@@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 #endif
 
 static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
 static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
@@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void)
 		dm_timers = omap1_dm_timers;
 	else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
-		dm_source_names = (char **)omap2_dm_source_names;
-		dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+		dm_source_names = omap2_dm_source_names;
+		dm_source_clocks = omap2_dm_source_clocks;
 	} else if (cpu_is_omap34xx()) {
 		dm_timers = omap3_dm_timers;
-		dm_source_names = (char **)omap3_dm_source_names;
-		dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+		dm_source_names = omap3_dm_source_names;
+		dm_source_clocks = omap3_dm_source_clocks;
+	} else if (cpu_is_omap44xx()) {
+		dm_timers = omap4_dm_timers;
+		dm_source_names = omap4_dm_source_names;
+		dm_source_clocks = omap4_dm_source_clocks;
 	}
 
 	if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
 		timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
 			sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index ce6b4baeede..3746222bed1 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
 			config_invalid = 1;
 			return;
 		}
-		if (rg.paddr)
+		if (rg.paddr) {
 			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
-		reserved += rg.size;
+			reserved += rg.size;
+		}
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 17d7afe42b8..7fd89ba8d3b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -146,6 +149,16 @@
 #define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
 #define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
 
+/*
+ * OMAP44XX  specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
+
 #define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
 
 struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+		METHOD_GPIO_24XX },
+};
+
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 	}
 	if (cpu_is_omap24xx())
 		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return &gpio_bank[gpio >> 5];
 	BUG();
 	return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return gpio & 0x1f;
 	return gpio & 0x0f;
 }
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 160)
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
 	return -1;
 }
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 	else
 		goto done;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
 			clk_enable(bank->dbck);
 		else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
 		break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 /*---------------------------------------------------------------------*/
 
 static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
 static struct clk * gpio_ick;
 #endif
 
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
 static struct clk * gpio5_fck;
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
 			sprintf(clk_name, "gpio%d_ick", i + 1);
 			gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		int rev;
+
+		gpio_bank_count = OMAP34XX_NR_GPIOS;
+		gpio_bank = gpio_bank_44xx;
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
+#endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
 
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
 
-		if (cpu_is_omap34xx()) {
+		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 			sprintf(clk_name, "gpio%d_dbck", i + 1);
 			bank->dbck = clk_get(NULL, clk_name);
 			if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
 
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 			irqstat = irq_desc[irq].status;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
-		defined(CONFIG_ARCH_OMAP34XX)
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071d5e3..8b848391f0c 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2007 Nokia Corporation.
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f..f9f65e1ba3f 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
 	void			(*disable)(struct clk *);
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 
 struct clksel_rate {
 	u32			val;
@@ -51,7 +52,7 @@ struct dpll_data {
 	u8			max_divider;
 	u32			max_tolerance;
 	u16			max_multiplier;
-#  if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u8			modes;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
 	void			(*init)(struct clk *);
 	__u8			enable_bit;
 	__s8			usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
 	u32			clksel_mask;
@@ -119,7 +121,7 @@ struct clk_functions {
 extern unsigned int mpurate;
 
 extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);
 extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17..fdeab421b4d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
 #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -62,6 +60,7 @@ struct omap_globals {
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836..8140dbccb7b 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -144,6 +144,10 @@
 #define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -189,8 +193,18 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT	0
+#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
+
 #ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b14425236..fc60c4ebcc2 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
+ * Copyright (C) 2009 Texas Instruments.
+ *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap3430()		is_omap3430()
 #endif
 
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx()		1
+# define cpu_is_omap443x()		1
+# endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
+				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
+#define OMAP443X_CLASS		0x44300034
+
 /*
  * omap_chip bits
  *
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d..ac24050e341 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
 
-#elif	CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
 		movne	\rx, #0xd8000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe9665b18..8c1eae88737 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
 /* Hardware registers for omap2 and omap3 */
 #define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
 #define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
 
 #define OMAP_DMA4_REVISION		0x00
 #define OMAP_DMA4_GCR			0x78
@@ -144,6 +145,7 @@
 #define OMAP_DMA4_CSSA_U(n)		0
 #define OMAP_DMA4_CDSA_L(n)		0
 #define OMAP_DMA4_CDSA_U(n)		0
+#define OMAP1_DMA_COLOR(n)		0
 
 /*----------------------------------------------------------------------------*/
 
@@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
+				  void (*callback) (int lch, u16 ch_status,
 						    void *data),
 				  int *chain_id, int no_of_chans,
 				  int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89671d..56426ed45ef 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
  *
  * Low-level IRQ helper macros for OMAP-based platforms
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
+#include <asm/hardware/gic.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -56,15 +60,21 @@
 		.endm
 
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 
-#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
 #include <mach/omap34xx.h>
-#endif
 
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
 
@@ -77,6 +87,7 @@
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
+#ifndef CONFIG_ARCH_OMAP4
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP2_VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,68 @@
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
 		.endm
+#else
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 00000000000..b64fbee4d56
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96	(1 << 4)
+#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_pwrdwn;
+	int	gpio_reset;
+	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
+	u32	flags;
+	int	(*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+	defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data	NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e8..26c1fbff08a 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3..886248d32b4 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
 #define _HWA742_H
 
 struct hwa742_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
 	unsigned	te_connected:1;
 };
 
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d..3b281472056 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
  * Copied from arch/arm/mach-sa1100/include/mach/io.h
  * Copyright (C) 1997-1999 Russell King
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE
+#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE
+#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_SIZE		SZ_4M
+
+
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_SIZE		SZ_1M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT	0xd8000000
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT	0xe4000000
+#define L4_EMU_44XX_SIZE	SZ_64M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT	0xe0000000
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
 #endif
 
 #define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 00000000000..769b00b4c34
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+	u32 da;
+	u32 pa;
+	u32 pgsz, prsvd, valid;
+	union {
+		u16 ap;
+		struct {
+			u32 endian, elsz, mixed;
+		};
+	};
+};
+
+struct iommu {
+	const char	*name;
+	struct module	*owner;
+	struct clk	*clk;
+	void __iomem	*regbase;
+	struct device	*dev;
+
+	unsigned int	refcount;
+	struct mutex	iommu_lock;	/* global for this whole object */
+
+	/*
+	 * We don't change iopgd for a situation like pgd for a task,
+	 * but share it globally for each iommu.
+	 */
+	u32		*iopgd;
+	spinlock_t	page_table_lock; /* protect iopgd */
+
+	int		nr_tlb_entries;
+
+	struct list_head	mmap;
+	struct mutex		mmap_lock; /* protect mmap */
+
+	int (*isr)(struct iommu *obj);
+
+	void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+	union {
+		struct {
+			u16 cam_l;
+			u16 cam_h;
+		};
+		u32 cam;
+	};
+	union {
+		struct {
+			u16 ram_l;
+			u16 ram_h;
+		};
+		u32 ram;
+	};
+};
+
+struct iotlb_lock {
+	short base;
+	short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+	unsigned long	version;
+
+	int (*enable)(struct iommu *obj);
+	void (*disable)(struct iommu *obj);
+	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+	void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+	struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+	int (*cr_valid)(struct cr_regs *cr);
+	u32 (*cr_to_virt)(struct cr_regs *cr);
+	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+	ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+	u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+	void (*save_ctx)(struct iommu *obj);
+	void (*restore_ctx)(struct iommu *obj);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+	const char *name;
+	const char *clk_name;
+	const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)			\
+	(((bytes) >= SZ_16M) ? SZ_16M :		\
+	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
+	 ((bytes) >= SZ_64K) ? SZ_64K :		\
+	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
+
+#define bytes_to_iopgsz(bytes)				\
+	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
+	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
+	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
+	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)				\
+	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+				int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 00000000000..10ad05f410e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION		0x00
+#define MMU_SYSCONFIG		0x10
+#define MMU_SYSSTATUS		0x14
+#define MMU_IRQSTATUS		0x18
+#define MMU_IRQENABLE		0x1c
+#define MMU_WALKING_ST		0x40
+#define MMU_CNTL		0x44
+#define MMU_FAULT_AD		0x48
+#define MMU_TTB			0x4c
+#define MMU_LOCK		0x50
+#define MMU_LD_TLB		0x54
+#define MMU_CAM			0x58
+#define MMU_RAM			0x5c
+#define MMU_GFLUSH		0x60
+#define MMU_FLUSH_ENTRY		0x64
+#define MMU_READ_CAM		0x68
+#define MMU_READ_RAM		0x6c
+#define MMU_EMU_FAULT_AD	0x70
+
+#define MMU_REG_SIZE		256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT	10
+#define MMU_LOCK_BASE_MASK	(0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x)	\
+	((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT	4
+#define MMU_LOCK_VICT_MASK	(0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x)	\
+	((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT	12
+#define MMU_CAM_VATAG_MASK \
+	((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P		(1 << 3)
+#define MMU_CAM_V		(1 << 2)
+#define MMU_CAM_PGSZ_MASK	3
+#define MMU_CAM_PGSZ_1M		(0 << 0)
+#define MMU_CAM_PGSZ_64K	(1 << 0)
+#define MMU_CAM_PGSZ_4K		(2 << 0)
+#define MMU_CAM_PGSZ_16M	(3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT	12
+#define MMU_RAM_PADDR_MASK \
+	((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT	9
+#define MMU_RAM_ENDIAN_MASK	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE	(0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT	7
+#define MMU_RAM_ELSZ_MASK	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8		(0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16		(1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32		(2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT	6
+#define MMU_RAM_MIXED_MASK	(1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED		MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+	return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+	__raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 00000000000..bdc7ce5d7a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+	struct iommu		*iommu;	/* iommu object which this belongs to */
+	u32			da_start; /* area definition */
+	u32			da_end;
+	u32			flags; /* IOVMF_: see below */
+	struct list_head	list; /* linked in ascending order */
+	const struct sg_table	*sgt; /* keep 'page' <-> 'da' mapping */
+	void			*va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT		16
+#define IOVMF_HW_SIZE		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK		(IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK		(~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK		(~((1 << 10) - 1))
+#define IOVMF_RAM_MASK		(~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK		(3 << 0)
+#define IOVMF_PGSZ_1M		MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K		MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K		MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M		MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK	(1 << 9)
+#define IOVMF_ENDIAN_BIG	MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE	MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK		(3 << 7)
+#define IOVMF_ELSZ_8		MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16		MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32		MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE		MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK	(1 << 6)
+#define IOVMF_MIXED		MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC		(2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK	(3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT		(1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR		(2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON		(2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK		(3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+			const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+			u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f36..fb7cb772399 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,94 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
+
+#define IRQ_GIC_START		32
+#define INT_44XX_LOCALTIMER_IRQ	29
+#define INT_44XX_LOCALWDT_IRQ	30
+
+#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+
+
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
@@ -467,6 +558,7 @@
 
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923aaf61..45ea3ae3c99 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
 #define GROUP_3		(3 << 16)
 #define GROUP_MASK	GROUP_3
 
+#define KEY_PERSISTENT		0x00800000
+#define KEYNUM_MASK		0x00EFFFFF
 #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d927..9ad41dc484c 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4932f..696edfc145a 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab640151d3e..f8d186a7371 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
@@ -83,15 +79,6 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE			OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
 #define OMAP34XX_DSP_BASE	0x58000000
 #define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
 #define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 00000000000..15dec7f1c7c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE			0x4a000000
+#define L4_WK_44XX_BASE			0x4a300000
+#define L4_PER_44XX_BASE		0x48000000
+#define L4_EMU_44XX_BASE		0x54000000
+#define L3_44XX_BASE			0x44000000
+#define OMAP4430_32KSYNCT_BASE		0x4a304000
+#define OMAP4430_CM_BASE		0x4a004000
+#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP44XX_GPMC_BASE		0x50000000
+#define OMAP443X_SCM_BASE		0x4a002000
+#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE		0x48200000
+#define OMAP44XX_IVA_INTC_BASE		0x40000000
+#define IRQ_SIR_IRQ			0x0040
+#define OMAP44XX_GIC_DIST_BASE		0x48241000
+#define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE		0x48240000
+#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
+#define OMAP44XX_WKUPGEN_BASE		0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d302c26..72f433d7d82 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#define ONENAND_SYNC_READ	(1 << 0)
+#define ONENAND_SYNC_READWRITE	(1 << 1)
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
 	int			nr_parts;
 	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
+	u8			flags;
 };
 
-int omap2_onenand_rephase(void);
-
 #define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data	NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be4..13abd02d152 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
 /*
- *  arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
+#define OMAP_MAX_NR_PORTS	3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x48020000
+#define OMAP_UART4_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	4
 #endif
 
-#define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
@@ -40,4 +52,13 @@
 			__ret;						\
 			})
 
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h
new file mode 100644
index 00000000000..dcaa8fde706
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/smp.h
@@ -0,0 +1,51 @@
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d622dcf..dca7c16ae90 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
 				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2);
+				     u32 sdrc_actim_ctrlb, u32 m2,
+				     u32 unlock_dll);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
 extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
 					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2);
+					  u32 sdrc_actim_ctrlb, u32 m2,
+					  u32 unlock_dll);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0ceed500..f337e1761e2 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
-#ifdef CONFIG_USB_MUSB_SOC
 extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd9619..b97dfafeebd 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad..9b42d72d96c 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -7,6 +18,7 @@
 #include <mach/omap16xx.h>
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
 	}
 #endif
-
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+		if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+	}
+#endif
 	return __arm_ioremap(p, size, type);
 }
 EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 00000000000..4cf449fa2cb
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu)
+		return -EBUSY;
+
+	arch_iommu = ops;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu != ops)
+		pr_err("%s: not your arch\n", __func__);
+
+	arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+	arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+	arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+	return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+	int err;
+
+	if (!obj)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	err = arch_iommu->enable(obj);
+
+	clk_disable(obj->clk);
+	return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+	if (!obj)
+		return;
+
+	clk_enable(obj->clk);
+
+	arch_iommu->disable(obj);
+
+	clk_disable(obj->clk);
+}
+
+/*
+ *	TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	BUG_ON(!cr || !e);
+
+	arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+	if (!cr)
+		return -EINVAL;
+
+	return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+					     struct iotlb_entry *e)
+{
+	if (!e)
+		return NULL;
+
+	return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+	return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+	return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+	return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	val = iommu_read_reg(obj, MMU_LOCK);
+
+	l->base = MMU_LOCK_BASE(val);
+	l->vict = MMU_LOCK_VICT(val);
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+	val = (l->base << MMU_LOCK_BASE_SHIFT);
+	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+	iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_load_cr(obj, cr);
+
+	iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+	iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj:	target iommu
+ * @cr:		contents of cam and ram register
+ * @buf:	output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+				    char *buf)
+{
+	BUG_ON(!cr || !buf);
+
+	return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int i;
+	int err = 0;
+	struct iotlb_lock l;
+	struct cr_regs *cr;
+
+	if (!obj || !obj->nr_tlb_entries || !e)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			break;
+	}
+
+	if (i == obj->nr_tlb_entries) {
+		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+
+	cr = iotlb_alloc_cr(obj, e);
+	if (IS_ERR(cr)) {
+		clk_disable(obj->clk);
+		return PTR_ERR(cr);
+	}
+
+	iotlb_load_cr(obj, cr);
+	kfree(cr);
+
+	/* increment victim for next tlb load */
+	if (++l.vict == obj->nr_tlb_entries)
+		l.vict = 0;
+	iotlb_lock_set(obj, &l);
+out:
+	clk_disable(obj->clk);
+	return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+	struct iotlb_lock l;
+	int i;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs cr;
+		u32 start;
+		size_t bytes;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &cr);
+		if (!iotlb_cr_valid(&cr))
+			continue;
+
+		start = iotlb_cr_to_virt(&cr);
+		bytes = iopgsz_to_bytes(cr.cam & 3);
+
+		if ((start <= da) && (da < start + bytes)) {
+			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+				__func__, start, da, bytes);
+
+			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+		}
+	}
+	clk_disable(obj->clk);
+
+	if (i == obj->nr_tlb_entries)
+		dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj:	target iommu
+ * @start:	iommu device virtual address(start)
+ * @end:	iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+	u32 da = start;
+
+	while (da < end) {
+		flush_iotlb_page(obj, da);
+		/* FIXME: Optimize for multiple page size */
+		da += IOPTE_SIZE;
+	}
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj:	target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+	struct iotlb_lock l;
+
+	clk_enable(obj->clk);
+
+	l.base = 0;
+	l.vict = 0;
+	iotlb_lock_set(obj, &l);
+
+	iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+	clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	ssize_t bytes;
+
+	if (!obj || !buf)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	bytes = arch_iommu->dump_ctx(obj, buf);
+
+	clk_disable(obj->clk);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+	int i;
+	struct iotlb_lock saved, l;
+	struct cr_regs *p = crs;
+
+	clk_enable(obj->clk);
+
+	iotlb_lock_get(obj, &saved);
+	memcpy(&l, &saved, sizeof(saved));
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			continue;
+
+		*p++ = tmp;
+	}
+	iotlb_lock_set(obj, &saved);
+	clk_disable(obj->clk);
+
+	return  p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj:	target iommu
+ * @buf:	output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+	int i, n;
+	struct cr_regs *cr;
+	char *p = buf;
+
+	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return 0;
+
+	n = __dump_tlb_entries(obj, cr);
+	for (i = 0; i < n; i++)
+		p += iotlb_dump_cr(obj, cr + i, p);
+	kfree(cr);
+
+	return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+	return driver_for_each_device(&omap_iommu_driver.driver,
+				      NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ *	H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pgd"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pte"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+	/* Note: freed iopte's must be clean ready for re-use */
+	kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+	u32 *iopte;
+
+	/* a table has already existed */
+	if (*iopgd)
+		goto pte_ready;
+
+	/*
+	 * do the allocation outside the page table lock
+	 */
+	spin_unlock(&obj->page_table_lock);
+	iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+	spin_lock(&obj->page_table_lock);
+
+	if (!*iopgd) {
+		if (!iopte)
+			return ERR_PTR(-ENOMEM);
+
+		*iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+		flush_iopgd_range(iopgd, iopgd);
+
+		dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+	} else {
+		/* We raced, free the reduniovant table */
+		iopte_free(iopte);
+	}
+
+pte_ready:
+	iopte = iopte_offset(iopgd, da);
+
+	dev_vdbg(obj->dev,
+		 "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		 __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+
+	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+	flush_iopgd_range(iopgd, iopgd);
+	return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	int i;
+
+	for (i = 0; i < 16; i++)
+		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+	flush_iopgd_range(iopgd, iopgd + 15);
+	return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	*iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+	flush_iopte_range(iopte, iopte);
+
+	dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+		 __func__, da, pa, iopte, *iopte);
+
+	return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+	int i;
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	for (i = 0; i < 16; i++)
+		*(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+	flush_iopte_range(iopte, iopte + 15);
+	return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+	int (*fn)(struct iommu *, u32, u32, u32);
+	u32 prot;
+	int err;
+
+	if (!obj || !e)
+		return -EINVAL;
+
+	switch (e->pgsz) {
+	case MMU_CAM_PGSZ_16M:
+		fn = iopgd_alloc_super;
+		break;
+	case MMU_CAM_PGSZ_1M:
+		fn = iopgd_alloc_section;
+		break;
+	case MMU_CAM_PGSZ_64K:
+		fn = iopte_alloc_large;
+		break;
+	case MMU_CAM_PGSZ_4K:
+		fn = iopte_alloc_page;
+		break;
+	default:
+		fn = NULL;
+		BUG();
+		break;
+	}
+
+	prot = get_iopte_attr(e);
+
+	spin_lock(&obj->page_table_lock);
+	err = fn(obj, e->da, e->pa, prot);
+	spin_unlock(&obj->page_table_lock);
+
+	return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int err;
+
+	flush_iotlb_page(obj, e->da);
+	err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+	if (!err)
+		load_iotlb_entry(obj, e);
+#endif
+	return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ * @ppgd:	iommu pgd entry pointer to be returned
+ * @ppte:	iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+	u32 *iopgd, *iopte = NULL;
+
+	iopgd = iopgd_offset(obj, da);
+	if (!*iopgd)
+		goto out;
+
+	if (*iopgd & IOPGD_TABLE)
+		iopte = iopte_offset(iopgd, da);
+out:
+	*ppgd = iopgd;
+	*ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+	u32 *iopgd = iopgd_offset(obj, da);
+	int nent = 1;
+
+	if (!*iopgd)
+		return 0;
+
+	if (*iopgd & IOPGD_TABLE) {
+		int i;
+		u32 *iopte = iopte_offset(iopgd, da);
+
+		bytes = IOPTE_SIZE;
+		if (*iopte & IOPTE_LARGE) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+		}
+		bytes *= nent;
+		memset(iopte, 0, nent * sizeof(*iopte));
+		flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+		/*
+		 * do table walk to check if this table is necessary or not
+		 */
+		iopte = iopte_offset(iopgd, 0);
+		for (i = 0; i < PTRS_PER_IOPTE; i++)
+			if (iopte[i])
+				goto out;
+
+		iopte_free(iopte);
+		nent = 1; /* for the next L1 entry */
+	} else {
+		bytes = IOPGD_SIZE;
+		if (*iopgd & IOPGD_SUPER) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+		}
+		bytes *= nent;
+	}
+	memset(iopgd, 0, nent * sizeof(*iopgd));
+	flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+	return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+
+	spin_lock(&obj->page_table_lock);
+
+	bytes = iopgtable_clear_entry_core(obj, da);
+	flush_iotlb_page(obj, da);
+
+	spin_unlock(&obj->page_table_lock);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+	int i;
+
+	spin_lock(&obj->page_table_lock);
+
+	for (i = 0; i < PTRS_PER_IOPGD; i++) {
+		u32 da;
+		u32 *iopgd;
+
+		da = i << IOPGD_SHIFT;
+		iopgd = iopgd_offset(obj, da);
+
+		if (!*iopgd)
+			continue;
+
+		if (*iopgd & IOPGD_TABLE)
+			iopte_free(iopte_offset(iopgd, 0));
+
+		*iopgd = 0;
+		flush_iopgd_range(iopgd, iopgd);
+	}
+
+	flush_iotlb_all(obj);
+
+	spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ *	Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+	u32 stat, da;
+	u32 *iopgd, *iopte;
+	int err = -EIO;
+	struct iommu *obj = data;
+
+	if (!obj->refcount)
+		return IRQ_NONE;
+
+	/* Dynamic loading TLB or PTE */
+	if (obj->isr)
+		err = obj->isr(obj);
+
+	if (!err)
+		return IRQ_HANDLED;
+
+	clk_enable(obj->clk);
+	stat = iommu_report_fault(obj, &da);
+	clk_disable(obj->clk);
+	if (!stat)
+		return IRQ_HANDLED;
+
+	iopgd = iopgd_offset(obj, da);
+
+	if (!(*iopgd & IOPGD_TABLE)) {
+		dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+			da, iopgd, *iopgd);
+		return IRQ_NONE;
+	}
+
+	iopte = iopte_offset(iopgd, da);
+
+	dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		__func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+	struct iommu *obj = to_iommu(dev);
+	const char *name = data;
+
+	pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+	return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name:	target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+	int err = -ENOMEM;
+	struct device *dev;
+	struct iommu *obj;
+
+	dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+				 device_match_by_alias);
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	obj = to_iommu(dev);
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (obj->refcount++ == 0) {
+		err = iommu_enable(obj);
+		if (err)
+			goto err_enable;
+		flush_iotlb_all(obj);
+	}
+
+	if (!try_module_get(obj->owner))
+		goto err_module;
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+	return obj;
+
+err_module:
+	if (obj->refcount == 1)
+		iommu_disable(obj);
+err_enable:
+	obj->refcount--;
+	mutex_unlock(&obj->iommu_lock);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj:	target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+	if (!obj && IS_ERR(obj))
+		return;
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (--obj->refcount == 0)
+		iommu_disable(obj);
+
+	module_put(obj->owner);
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ *	OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	void *p;
+	int irq;
+	struct iommu *obj;
+	struct resource *res;
+	struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdev->num_resources != 2)
+		return -EINVAL;
+
+	obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(obj->clk))
+		goto err_clk;
+
+	obj->nr_tlb_entries = pdata->nr_tlb_entries;
+	obj->name = pdata->name;
+	obj->dev = &pdev->dev;
+	obj->ctx = (void *)obj + sizeof(*obj);
+
+	mutex_init(&obj->iommu_lock);
+	mutex_init(&obj->mmap_lock);
+	spin_lock_init(&obj->page_table_lock);
+	INIT_LIST_HEAD(&obj->mmap);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto err_mem;
+	}
+	obj->regbase = ioremap(res->start, resource_size(res));
+	if (!obj->regbase) {
+		err = -ENOMEM;
+		goto err_mem;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+				 dev_name(&pdev->dev));
+	if (!res) {
+		err = -EIO;
+		goto err_mem;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = -ENODEV;
+		goto err_irq;
+	}
+	err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+			  dev_name(&pdev->dev), obj);
+	if (err < 0)
+		goto err_irq;
+	platform_set_drvdata(pdev, obj);
+
+	p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+	if (!p) {
+		err = -ENOMEM;
+		goto err_pgd;
+	}
+	memset(p, 0, IOPGD_TABLE_SIZE);
+	clean_dcache_area(p, IOPGD_TABLE_SIZE);
+	obj->iopgd = p;
+
+	BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+	dev_info(&pdev->dev, "%s registered\n", obj->name);
+	return 0;
+
+err_pgd:
+	free_irq(irq, obj);
+err_irq:
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+err_mem:
+	clk_put(obj->clk);
+err_clk:
+	kfree(obj);
+	return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+	int irq;
+	struct resource *res;
+	struct iommu *obj = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	iopgtable_clear_entry_all(obj);
+	free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, obj);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+
+	clk_put(obj->clk);
+	dev_info(&pdev->dev, "%s removed\n", obj->name);
+	kfree(obj);
+	return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+	.probe	= omap_iommu_probe,
+	.remove	= __devexit_p(omap_iommu_remove),
+	.driver	= {
+		.name	= "omap-iommu",
+	},
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+	clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+	struct kmem_cache *p;
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	size_t align = 1 << 10; /* L2 pagetable alignement */
+
+	p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+			      iopte_cachep_ctor);
+	if (!p)
+		return -ENOMEM;
+	iopte_cachep = p;
+
+	return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+	kmem_cache_destroy(iopte_cachep);
+
+	platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 00000000000..37dac434c7a
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT		20
+#define IOPGD_SIZE		(1 << IOPGD_SHIFT)
+#define IOPGD_MASK		(~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK		IOPGD_MASK
+#define PTRS_PER_IOPGD		(1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE		(IOPGD_SIZE << 4)
+#define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT		12
+#define IOPTE_SIZE		(1 << IOPTE_SHIFT)
+#define IOPTE_MASK		(~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK		IOPTE_MASK
+#define PTRS_PER_IOPTE		(1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE		(IOPTE_SIZE << 4)
+#define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE		(1 << 0)
+#define IOPGD_SECTION		(2 << 0)
+#define IOPGD_SUPER		(1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL		(2 << 0)
+#define IOPTE_LARGE		(1 << 0)
+
+#define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+				   u32 flags)
+{
+	memset(e, 0, sizeof(*e));
+
+	e->da		= da;
+	e->pa		= pa;
+	e->valid	= 1;
+	/* FIXME: add OMAP1 support */
+	e->pgsz		= flags & MMU_CAM_PGSZ_MASK;
+	e->endian	= flags & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= flags & MMU_RAM_ELSZ_MASK;
+	e->mixed	= flags & MMU_RAM_MIXED_MASK;
+
+	return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev)							\
+	(struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 00000000000..2fce2c151a9
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ *    |iova/			  mapping		iommu_		page
+ *    | da	pa	va	(d)-(p)-(v)		function	type
+ *  ---------------------------------------------------------------------------
+ *  1 | c	c	c	 1 - 1 - 1	  _kmap() / _kunmap()	s
+ *  2 | c	c,a	c	 1 - 1 - 1	_kmalloc()/ _kfree()	s
+ *  3 | c	d	c	 1 - n - 1	  _vmap() / _vunmap()	s
+ *  4 | c	d,a	c	 1 - n - 1	_vmalloc()/ _vfree()	n*
+ *
+ *
+ *	'iova':	device iommu virtual address
+ *	'da':	alias of 'iova'
+ *	'pa':	physical address
+ *	'va':	mpu virtual address
+ *
+ *	'c':	contiguous memory area
+ *	'd':	dicontiguous memory area
+ *	'a':	anonymous memory allocation
+ *	'()':	optional feature
+ *
+ *	'n':	a normal page(4KB) size is used.
+ *	's':	multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ *	'*':	not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+	unsigned int i, total = 0;
+	struct scatterlist *sg;
+
+	if (!sgt)
+		return 0;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = sg_dma_len(sg);
+
+		if (!iopgsz_ok(bytes)) {
+			pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+			       __func__, i, bytes);
+			return 0;
+		}
+
+		total += bytes;
+	}
+
+	return total;
+}
+#define sgtable_ok(x)	(!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+	int i;
+	unsigned int nr_entries;
+	const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+		pr_err("%s: wrong size %08x\n", __func__, bytes);
+		return 0;
+	}
+
+	nr_entries = 0;
+	for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+		if (bytes >= pagesize[i]) {
+			nr_entries += (bytes / pagesize[i]);
+			bytes %= pagesize[i];
+		}
+	}
+	BUG_ON(bytes);
+
+	return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+	unsigned int nr_entries;
+	int err;
+	struct sg_table *sgt;
+
+	if (!bytes)
+		return ERR_PTR(-EINVAL);
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE))
+		return ERR_PTR(-EINVAL);
+
+	/* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+	if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+		nr_entries = sgtable_nents(bytes);
+		if (!nr_entries)
+			return ERR_PTR(-EINVAL);
+	} else
+		nr_entries =  bytes / PAGE_SIZE;
+
+	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+	if (!sgt)
+		return ERR_PTR(-ENOMEM);
+
+	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+	if (err)
+		return ERR_PTR(err);
+
+	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+	return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+	if (!sgt)
+		return;
+
+	sg_free_table(sgt);
+	kfree(sgt);
+
+	pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+	u32 va;
+	size_t total;
+	unsigned int i;
+	struct scatterlist *sg;
+	struct vm_struct *new;
+	const struct mem_type *mtype;
+
+	mtype = get_mem_type(MT_DEVICE);
+	if (!mtype)
+		return ERR_PTR(-EINVAL);
+
+	total = sgtable_len(sgt);
+	if (!total)
+		return ERR_PTR(-EINVAL);
+
+	new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+	va = (u32)new->addr;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+		u32 pa;
+		int err;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		BUG_ON(bytes != PAGE_SIZE);
+
+		err = ioremap_page(va,  pa, mtype);
+		if (err)
+			goto err_out;
+
+		va += bytes;
+	}
+
+	flush_cache_vmap(new->addr, total);
+	return new->addr;
+
+err_out:
+	WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+	vunmap(new->addr);
+	return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+	vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+	struct iovm_struct *tmp;
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+			size_t len;
+
+			len = tmp->da_end - tmp->da_start;
+
+			dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+				__func__, tmp->da_start, da, tmp->da_end, len,
+				tmp->flags);
+
+			return tmp;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * find_iovm_area  -  find iovma which includes @da
+ * @da:		iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+	area = __find_iovm_area(obj, da);
+	mutex_unlock(&obj->mmap_lock);
+
+	return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+					   size_t bytes, u32 flags)
+{
+	struct iovm_struct *new, *tmp;
+	u32 start, prev_end, alignement;
+
+	if (!obj || !bytes)
+		return ERR_PTR(-EINVAL);
+
+	start = da;
+	alignement = PAGE_SIZE;
+
+	if (flags & IOVMF_DA_ANON) {
+		/*
+		 * Reserve the first page for NULL
+		 */
+		start = PAGE_SIZE;
+		if (flags & IOVMF_LINEAR)
+			alignement = iopgsz_max(bytes);
+		start = roundup(start, alignement);
+	}
+
+	tmp = NULL;
+	if (list_empty(&obj->mmap))
+		goto found;
+
+	prev_end = 0;
+	list_for_each_entry(tmp, &obj->mmap, list) {
+
+		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+			goto found;
+
+		if (flags & IOVMF_DA_ANON)
+			start = roundup(tmp->da_end, alignement);
+
+		prev_end = tmp->da_end;
+	}
+
+	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+		goto found;
+
+	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+		__func__, da, bytes, flags);
+
+	return ERR_PTR(-EINVAL);
+
+found:
+	new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+
+	new->iommu = obj;
+	new->da_start = start;
+	new->da_end = start + bytes;
+	new->flags = flags;
+
+	/*
+	 * keep ascending order of iovmas
+	 */
+	if (tmp)
+		list_add_tail(&new->list, &tmp->list);
+	else
+		list_add(&new->list, &obj->mmap);
+
+	dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+		__func__, new->da_start, start, new->da_end, bytes, flags);
+
+	return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	size_t bytes;
+
+	BUG_ON(!obj || !area);
+
+	bytes = area->da_end - area->da_start;
+
+	dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+		__func__, area->da_start, area->da_end, bytes, area->flags);
+
+	list_del(&area->list);
+	kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ * @va:		mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+	void *va = NULL;
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+	va = area->va;
+	mutex_unlock(&obj->mmap_lock);
+out:
+	return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va = _va;
+	void *va_end;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		struct page *pg;
+		const size_t bytes = PAGE_SIZE;
+
+		/*
+		 * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+		 */
+		pg = vmalloc_to_page(va);
+		BUG_ON(!pg);
+		sg_set_page(sg, pg, bytes, 0);
+
+		va += bytes;
+	}
+
+	va_end = _va + PAGE_SIZE * i;
+	flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility.
+	 */
+	BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va;
+
+	va = phys_to_virt(pa);
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = iopgsz_max(len);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		sg_set_buf(sg, phys_to_virt(pa), bytes);
+		/*
+		 * 'pa' is cotinuous(linear).
+		 */
+		pa += bytes;
+		len -= bytes;
+	}
+	BUG_ON(len);
+
+	clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility
+	 */
+	BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+			 const struct sg_table *sgt, u32 flags)
+{
+	int err;
+	unsigned int i, j;
+	struct scatterlist *sg;
+	u32 da = new->da_start;
+
+	if (!obj || !new || !sgt)
+		return -EINVAL;
+
+	BUG_ON(!sgtable_ok(sgt));
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		u32 pa;
+		int pgsz;
+		size_t bytes;
+		struct iotlb_entry e;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		flags &= ~IOVMF_PGSZ_MASK;
+		pgsz = bytes_to_iopgsz(bytes);
+		if (pgsz < 0)
+			goto err_out;
+		flags |= pgsz;
+
+		pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+			 i, da, pa, bytes);
+
+		iotlb_init_entry(&e, da, pa, flags);
+		err = iopgtable_store_entry(obj, &e);
+		if (err)
+			goto err_out;
+
+		da += bytes;
+	}
+	return 0;
+
+err_out:
+	da = new->da_start;
+
+	for_each_sg(sgt->sgl, sg, i, j) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, da);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		da += bytes;
+	}
+	return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	u32 start;
+	size_t total = area->da_end - area->da_start;
+
+	BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+	start = area->da_start;
+	while (total > 0) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, start);
+		if (bytes == 0)
+			bytes = PAGE_SIZE;
+		else
+			dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+				__func__, start, bytes, area->flags);
+
+		BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+		total -= bytes;
+		start += bytes;
+	}
+	BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+				      void (*fn)(const void *), u32 flags)
+{
+	struct sg_table *sgt = NULL;
+	struct iovm_struct *area;
+
+	if (!IS_ALIGNED(da, PAGE_SIZE)) {
+		dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+		return NULL;
+	}
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+
+	if ((area->flags & flags) != flags) {
+		dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+			area->flags);
+		goto out;
+	}
+	sgt = (struct sg_table *)area->sgt;
+
+	unmap_iovm_area(obj, area);
+
+	fn(area->va);
+
+	dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+		area->da_start, da, area->da_end,
+		area->da_end - area->da_start, area->flags);
+
+	free_iovm_area(obj, area);
+out:
+	mutex_unlock(&obj->mmap_lock);
+
+	return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+	      const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	int err = -ENOMEM;
+	struct iovm_struct *new;
+
+	mutex_lock(&obj->mmap_lock);
+
+	new = alloc_iovm_area(obj, da, bytes, flags);
+	if (IS_ERR(new)) {
+		err = PTR_ERR(new);
+		goto err_alloc_iovma;
+	}
+	new->va = va;
+	new->sgt = sgt;
+
+	if (map_iovm_area(obj, new, sgt, new->flags))
+		goto err_map;
+
+	mutex_unlock(&obj->mmap_lock);
+
+	dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+		__func__, new->da_start, bytes, new->flags, va);
+
+	return new->da_start;
+
+err_map:
+	free_iovm_area(obj, new);
+err_alloc_iovma:
+	mutex_unlock(&obj->mmap_lock);
+	return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+		 const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @sgt:	address of scatter gather table
+ * @flags:	iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+		 u32 flags)
+{
+	size_t bytes;
+	void *va;
+
+	if (!obj || !obj->dev || !sgt)
+		return -EINVAL;
+
+	bytes = sgtable_len(sgt);
+	if (!bytes)
+		return -EINVAL;
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmap_sg(sgt);
+	if (IS_ERR(va))
+		return PTR_ERR(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		vunmap_sg(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap  -  release virtual mapping obtained by 'iommu_vmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	/*
+	 * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+	 * Just returns 'sgt' to the caller to free
+	 */
+	sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	allocation size
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	struct sg_table *sgt;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmalloc(bytes);
+	if (!va)
+		return -ENOMEM;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt)) {
+		da = PTR_ERR(sgt);
+		goto err_sgt_alloc;
+	}
+	sgtable_fill_vmalloc(sgt, va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		goto err_iommu_vmap;
+
+	return da;
+
+err_iommu_vmap:
+	sgtable_drain_vmalloc(sgt);
+	sgtable_free(sgt);
+err_sgt_alloc:
+	vfree(va);
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree  -  release memory allocated by 'iommu_vmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+			  size_t bytes, u32 flags)
+{
+	struct sg_table *sgt;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt))
+		return PTR_ERR(sgt);
+
+	sgtable_fill_kmalloc(sgt, pa, bytes);
+
+	da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da)) {
+		sgtable_drain_kmalloc(sgt);
+		sgtable_free(sgt);
+	}
+
+	return da;
+}
+
+/**
+ * iommu_kmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @pa:		contiguous physical memory
+ * @flags:	iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+		 u32 flags)
+{
+	void *va;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = ioremap(pa, bytes);
+	if (!va)
+		return -ENOMEM;
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		iounmap(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap  -  release virtual mapping obtained by 'iommu_kmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	typedef void (*func_t)(const void *);
+
+	sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+			    IOVMF_LINEAR | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	bytes for allocation
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	u32 pa;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+	if (!va)
+		return -ENOMEM;
+	pa = virt_to_phys(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		kfree(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree  -  release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	struct kmem_cache *p;
+
+	p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+			      flags, NULL);
+	if (!p)
+		return -ENOMEM;
+	iovm_area_cachep = p;
+
+	return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+	kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 0abfbaa5987..40424edae93 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -147,24 +147,40 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
 	return ret;
 }
 
+struct omap_msg_tx_data {
+	mbox_msg_t	msg;
+	void		*arg;
+};
+
+static void omap_msg_tx_end_io(struct request *rq, int error)
+{
+	kfree(rq->special);
+	__blk_put_request(rq->q, rq);
+}
+
 int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
 {
+	struct omap_msg_tx_data *tx_data;
 	struct request *rq;
 	struct request_queue *q = mbox->txq->queue;
-	int ret = 0;
+
+	tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
+	if (unlikely(!tx_data))
+		return -ENOMEM;
 
 	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
 	if (unlikely(!rq)) {
-		ret = -ENOMEM;
-		goto fail;
+		kfree(tx_data);
+		return -ENOMEM;
 	}
 
-	rq->data = (void *)msg;
-	blk_insert_request(q, rq, 0, arg);
+	tx_data->msg = msg;
+	tx_data->arg = arg;
+	rq->end_io = omap_msg_tx_end_io;
+	blk_insert_request(q, rq, 0, tx_data);
 
 	schedule_work(&mbox->txq->work);
- fail:
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
@@ -178,22 +194,28 @@ static void mbox_tx_work(struct work_struct *work)
 	struct request_queue *q = mbox->txq->queue;
 
 	while (1) {
+		struct omap_msg_tx_data *tx_data;
+
 		spin_lock(q->queue_lock);
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		spin_unlock(q->queue_lock);
 
 		if (!rq)
 			break;
 
-		ret = __mbox_msg_send(mbox, (mbox_msg_t) rq->data, rq->special);
+		tx_data = rq->special;
+
+		ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
 		if (ret) {
 			enable_mbox_irq(mbox, IRQ_TX);
+			spin_lock(q->queue_lock);
+			blk_requeue_request(q, rq);
+			spin_unlock(q->queue_lock);
 			return;
 		}
 
 		spin_lock(q->queue_lock);
-		if (__blk_end_request(rq, 0, 0))
-			BUG();
+		__blk_end_request_all(rq, 0);
 		spin_unlock(q->queue_lock);
 	}
 }
@@ -218,16 +240,13 @@ static void mbox_rx_work(struct work_struct *work)
 
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		spin_unlock_irqrestore(q->queue_lock, flags);
 		if (!rq)
 			break;
 
-		msg = (mbox_msg_t) rq->data;
-
-		if (blk_end_request(rq, 0, 0))
-			BUG();
-
+		msg = (mbox_msg_t)rq->special;
+		blk_end_request_all(rq, 0);
 		mbox->rxq->callback((void *)msg);
 	}
 }
@@ -264,7 +283,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 			goto nomem;
 
 		msg = mbox_fifo_read(mbox);
-		rq->data = (void *)msg;
 
 		if (unlikely(mbox_seq_test(mbox, msg))) {
 			pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
@@ -272,7 +290,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 				mbox->err_notify();
 		}
 
-		blk_insert_request(q, rq, 0, NULL);
+		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
 			break;
 	}
@@ -329,16 +347,15 @@ omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
 
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		spin_unlock_irqrestore(q->queue_lock, flags);
 
 		if (!rq)
 			break;
 
-		*p = (mbox_msg_t) rq->data;
+		*p = (mbox_msg_t)rq->special;
 
-		if (blk_end_request(rq, 0, 0))
-			BUG();
+		blk_end_request_all(rq, 0);
 
 		if (unlikely(mbox_seq_test(mbox, *p))) {
 			pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a824b8c..efa0e0111f3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
+	u16 irqst_spcr2;
 
-	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+	irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
 
-	complete(&mcbsp_tx->tx_irq_completion);
+	if (irqst_spcr2 & XSYNC_ERR) {
+		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+			irqst_spcr2);
+		/* Writing zero to XSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+			irqst_spcr2 & ~(XSYNC_ERR));
+	} else {
+		complete(&mcbsp_tx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_rx = dev_id;
+	u16 irqst_spcr1;
 
-	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+	irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
 
-	complete(&mcbsp_rx->rx_irq_completion);
+	if (irqst_spcr1 & RSYNC_ERR) {
+		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+			irqst_spcr1);
+		/* Writing zero to RSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+			irqst_spcr1 & ~(RSYNC_ERR));
+	} else {
+		complete(&mcbsp_rx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca..8d329fb2074 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
+	if (cpu_is_omap44xx())
+		return 0;
+
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
 		return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d643d..a5b9bcd6b10 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -38,12 +41,14 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PUB_VA	(VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xd7000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
+#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
 {
 	int type = 0;
 
+	if (cpu_is_omap44xx())
+		/* Not yet supported */
+		return 0;
+
 	if (cpu_is_omap242x())
 		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
 				omap_sram_base = OMAP3_SRAM_VA;
 				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_VA;
+				omap_sram_start = OMAP4_SRAM_PA;
+				omap_sram_size = 0x8000; /* 32K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@ void __init omap_map_sram(void)
 		base = OMAP3_SRAM_PA;
 		base = ROUND_DOWN(base, PAGE_SIZE);
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+		/*
+		 * SRAM must be marked as non-cached on OMAP3 since the
+		 * CORE DPLL M2 divider change code (in SRAM) runs with the
+		 * SDRAM controller disabled, and if it is marked cached,
+		 * the ARM may attempt to write cache lines back to SDRAM
+		 * which will cause the system to hang.
+		 */
+		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
+	if (cpu_is_omap44xx()) {
+		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+		base = OMAP4_SRAM_PA;
+		base = ROUND_DOWN(base, PAGE_SIZE);
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	}
 	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-static void omap_sram_error(void)
-{
-	panic("Uninitialized SRAM function\n");
-}
-
 #ifdef CONFIG_ARCH_OMAP1
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
-	if (!_omap_sram_reprogram_clock)
-		omap_sram_error();
-
+	BUG_ON(!_omap_sram_reprogram_clock);
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
@@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 		   u32 base_cs, u32 force_unlock)
 {
-	if (!_omap2_sram_ddr_init)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_ddr_init);
 	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
 			     base_cs, force_unlock);
 }
@@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
 
 void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
 {
-	if (!_omap2_sram_reprogram_sdrc)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_reprogram_sdrc);
 	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
 }
 
@@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 {
-	if (!_omap2_set_prcm)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_set_prcm);
 	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
 }
 #endif
@@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
 					      u32 sdrc_actim_ctrla,
 					      u32 sdrc_actim_ctrlb,
-					      u32 m2);
+					      u32 m2, u32 unlock_dll);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2)
+			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
 {
-	if (!_omap3_sram_configure_core_dpll)
-		omap_sram_error();
-
+	BUG_ON(!_omap3_sram_configure_core_dpll);
 	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
 					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2);
+					       sdrc_actim_ctrlb, m2,
+					       unlock_dll);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
+	else if (cpu_is_omap44xx())
+		omap34xx_sram_init(); /* FIXME: */
 
 	return 0;
 }
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 32eb9e33beb..e814803d474 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -15,10 +15,9 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 static DEFINE_SPINLOCK(gpio_lock);
-static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
 static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
 
@@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high)
 	writel(u, GPIO_OUT(pin));
 }
 
-
-/*
- * GENERIC_GPIO primitives.
- */
-int gpio_direction_input(unsigned pin)
+static inline void __set_blinking(unsigned pin, int blink)
 {
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
+	u32 u;
 
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 1);
+	u = readl(GPIO_BLINK_EN(pin));
+	if (blink)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+}
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
+static inline int orion_gpio_is_valid(unsigned pin, int mode)
+{
+	if (pin < GPIO_MAX) {
+		if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
+			goto err_out;
+		if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
+			goto err_out;
+		return true;
+	}
 
-	return 0;
+err_out:
+	pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	return false;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned pin, int value)
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
 	unsigned long flags;
-	u32 u;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
 		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
-
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
-
-	/*
-	 * Configure GPIO output value.
-	 */
-	__set_level(pin, value);
-
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 0);
+	/* Configure GPIO direction. */
+	__set_direction(pin, 1);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-int gpio_get_value(unsigned pin)
+static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
 {
 	int val;
 
@@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin)
 
 	return (val >> (pin & 31)) & 1;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-void gpio_set_value(unsigned pin, int value)
+static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	u32 u;
+
+	if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return -EINVAL;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Disable blinking. */
+	__set_blinking(pin, 0);
 
-	/*
-	 * Configure GPIO output value.
-	 */
+	/* Configure GPIO output value. */
 	__set_level(pin, value);
 
+	/* Configure GPIO direction. */
+	__set_direction(pin, 0);
+
 	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_request(unsigned pin, const char *label)
+static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	int ret;
-
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
-	if (gpio_label[pin] == NULL) {
-		gpio_label[pin] = label ? label : "?";
-		ret = 0;
-	} else {
-		pr_debug("%s: GPIO %d already used as %s\n",
-			 __func__, pin, gpio_label[pin]);
-		ret = -EBUSY;
-	}
-	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	return ret;
+	/* Configure GPIO output value. */
+	__set_level(pin, value);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned pin)
+static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return;
-	}
-
-	if (gpio_label[pin] == NULL)
-		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
-	else
-		gpio_label[pin] = NULL;
+	if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
+	    orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return 0;
+	return -EINVAL;
 }
-EXPORT_SYMBOL(gpio_free);
 
+static struct gpio_chip orion_gpiochip = {
+	.label			= "orion_gpio",
+	.direction_input	= orion_gpio_direction_input,
+	.get			= orion_gpio_get_value,
+	.direction_output	= orion_gpio_direction_output,
+	.set			= orion_gpio_set_value,
+	.request		= orion_gpio_request,
+	.base			= 0,
+	.ngpio			= GPIO_MAX,
+	.can_sleep		= 0,
+};
+
+void __init orion_gpio_init(void)
+{
+	gpiochip_add(&orion_gpiochip);
+}
 
 /*
  * Orion-specific GPIO API extensions.
  */
 void __init orion_gpio_set_unused(unsigned pin)
 {
-	/*
-	 * Configure as output, drive low.
-	 */
+	/* Configure as output, drive low. */
 	__set_level(pin, 0);
 	__set_direction(pin, 0);
 }
@@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode)
 void orion_gpio_set_blink(unsigned pin, int blink)
 {
 	unsigned long flags;
-	u32 u;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Set output value to zero.
-	 */
+	/* Set output value to zero. */
 	__set_level(pin, 0);
 
-	u = readl(GPIO_BLINK_EN(pin));
-	if (blink)
-		u |= 1 << (pin & 31);
-	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Set blinking. */
+	__set_blinking(pin, blink);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
@@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 }
 
 struct irq_chip orion_gpio_irq_chip = {
-	.name		= "orion_gpio",
+	.name		= "orion_gpio_irq",
 	.ack		= gpio_irq_ack,
 	.mask		= gpio_irq_mask,
 	.unmask		= gpio_irq_unmask,
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 33f6c6aec18..9646a94ed3d 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -14,12 +14,9 @@
 /*
  * GENERIC_GPIO primitives.
  */
-int gpio_request(unsigned pin, const char *label);
-void gpio_free(unsigned pin);
-int gpio_direction_input(unsigned pin);
-int gpio_direction_output(unsigned pin, int value);
-int gpio_get_value(unsigned pin);
-void gpio_set_value(unsigned pin, int value);
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
 
 /*
  * Orion-specific GPIO API extensions.
@@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value);
 void orion_gpio_set_unused(unsigned pin);
 void orion_gpio_set_blink(unsigned pin, int blink);
 
-#define GPIO_BIDI_OK		(1 << 0)
-#define GPIO_INPUT_OK		(1 << 1)
-#define GPIO_OUTPUT_OK		(1 << 2)
+#define GPIO_INPUT_OK		(1 << 0)
+#define GPIO_OUTPUT_OK		(1 << 1)
 void orion_gpio_set_valid(unsigned pin, int mode);
 
+/* Initialize gpiolib. */
+void __init orion_gpio_init(void);
+
 /*
  * GPIO interrupt handling.
  */
diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
index 3c9cf6a305e..665c362a2fb 100644
--- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h
+++ b/arch/arm/plat-orion/include/plat/orion_wdt.h
@@ -1,15 +1,15 @@
 /*
- * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ * arch/arm/plat-orion/include/plat/orion_wdt.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_ORION5X_WDT_H
-#define __PLAT_ORION5X_WDT_H
+#ifndef __PLAT_ORION_WDT_H
+#define __PLAT_ORION_WDT_H
 
-struct orion5x_wdt_platform_data {
+struct orion_wdt_platform_data {
 	u32	tclk;		/* no <linux/clk.h> support yet */
 };
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index de8a001fc3a..715a30177f2 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,11 +12,15 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/bridge-regs.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
@@ -39,6 +43,56 @@ static u32 ticks_per_jiffy;
 
 
 /*
+ * Orion's sched_clock implementation. It has a resolution of
+ * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
+ *
+ * Because the hardware timer period is quite short (21 secs if
+ * 200MHz TCLK) and because cnt32_to_63() needs to be called at
+ * least once per half period to work properly, a kernel timer is
+ * set up to ensure this requirement is always met.
+ */
+#define TCLK2NS_SCALE_FACTOR 8
+
+static unsigned long tclk2ns_scale;
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
+	return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+}
+
+static struct timer_list cnt32_to_63_keepwarm_timer;
+
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+static void __init setup_sched_clock(unsigned long tclk)
+{
+	unsigned long long v;
+	unsigned long data;
+
+	v = NSEC_PER_SEC;
+	v <<= TCLK2NS_SCALE_FACTOR;
+	v += tclk/2;
+	do_div(v, tclk);
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (v & 1)
+		v++;
+	tclk2ns_scale = v;
+
+	data = (0xffffffffUL / tclk / 2 - 2) * HZ;
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+}
+
+/*
  * Clocksource handling.
  */
 static cycle_t orion_clksrc_read(struct clocksource *cs)
@@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
+	/*
+	 * Set scale and timer for sched_clock
+	 */
+	setup_sched_clock(tclk);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
@@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 	orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
 	clocksource_register(&orion_clksrc);
 
-
 	/*
 	 * Setup clockevent timer (interrupt-driven.)
 	 */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 8f2c4c7fbd4..0264bfb0ca4 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -7,3 +7,5 @@ obj-y	:= dma.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h
index 1a9f65e6ec0..1a9f65e6ec0 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/plat-pxa/include/plat/i2c.h
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index fcdd374437a..a9eabdcfa16 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -21,6 +21,19 @@
 
 #include <asm/div64.h>
 
+#define HAS_SECONDARY_PWM	0x10
+#define PWM_ID_BASE(d)		((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 1 },
+	{ "pxa910-pwm", 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
 #define PWMDCR		(0x04)
@@ -31,7 +44,8 @@
 
 struct pwm_device {
 	struct list_head	node;
-	struct platform_device *pdev;
+	struct pwm_device	*secondary;
+	struct platform_device	*pdev;
 
 	const char	*label;
 	struct clk	*clk;
@@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm)
 	mutex_unlock(&pwm_lock);
 }
 
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
-		unsigned int pwm_id, struct pwm_device *parent_pwm)
+static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct pwm_device *pwm;
+	struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;
 
 	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
 	if (pwm == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 	}
 
 	pwm->clk = clk_get(&pdev->dev, NULL);
@@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 	pwm->clk_enabled = 0;
 
 	pwm->use_count = 0;
-	pwm->pwm_id = pwm_id;
+	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
 	pwm->pdev = pdev;
 
-	if (parent_pwm != NULL) {
-		/* registers for the second PWM has offset of 0x10 */
-		pwm->mmio_base = parent_pwm->mmio_base + 0x10;
-		__add_pwm(pwm);
-		return pwm;
-	}
-
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 		goto err_free_mem;
 	}
 
+	if (id->driver_data & HAS_SECONDARY_PWM) {
+		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+		if (secondary == NULL) {
+			ret = -ENOMEM;
+			goto err_free_mem;
+		}
+
+		*secondary = *pwm;
+		pwm->secondary = secondary;
+
+		/* registers for the second PWM has offset of 0x10 */
+		secondary->mmio_base = pwm->mmio_base + 0x10;
+		secondary->pwm_id = pdev->id + 2;
+	}
+
 	__add_pwm(pwm);
+	if (secondary)
+		__add_pwm(secondary);
+
 	platform_set_drvdata(pdev, pwm);
-	return pwm;
+	return 0;
 
 err_free_mem:
 	release_mem_region(r->start, r->end - r->start + 1);
@@ -221,32 +246,7 @@ err_free_clk:
 	clk_put(pwm->clk);
 err_free:
 	kfree(pwm);
-	return ERR_PTR(ret);
-}
-
-static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
-}
-
-static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-
-	pwm = pwm_probe(pdev, pdev->id, NULL);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	pwm = pwm_probe(pdev, pdev->id + 2, pwm);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
+	return ret;
 }
 
 static int __devexit pwm_remove(struct platform_device *pdev)
@@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 		return -ENODEV;
 
 	mutex_lock(&pwm_lock);
+
+	if (pwm->secondary) {
+		list_del(&pwm->secondary->node);
+		kfree(pwm->secondary);
+	}
+
 	list_del(&pwm->node);
 	mutex_unlock(&pwm_lock);
 
@@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver pxa25x_pwm_driver = {
+static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
+		.owner	= THIS_MODULE,
 	},
-	.probe		= pxa25x_pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static struct platform_driver pxa27x_pwm_driver = {
-	.driver		= {
-		.name	= "pxa27x-pwm",
-	},
-	.probe		= pxa27x_pwm_probe,
+	.probe		= pwm_probe,
 	.remove		= __devexit_p(pwm_remove),
+	.id_table	= pwm_id_table,
 };
 
 static int __init pwm_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&pwm_driver);
 }
 arch_initcall(pwm_init);
 
 static void __exit pwm_exit(void)
 {
-	platform_driver_unregister(&pxa25x_pwm_driver);
-	platform_driver_unregister(&pxa27x_pwm_driver);
+	platform_driver_unregister(&pwm_driver);
 }
 module_exit(pwm_exit);
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de9383814e5..935c7558469 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
 config S3C2410_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
 	depends on PM && CRC32
@@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
@@ -172,4 +188,14 @@ config S3C_DEV_FB
 	help
 	  Compile in platform device definition for framebuffer
 
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d25a5..610651455a7 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,9 +18,14 @@ obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # devices
@@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index b6be76e2fe5..4d01ef1a25d 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
 
 int s3c24xx_register_clock(struct clk *clk)
 {
-	clk->owner = THIS_MODULE;
-
 	if (clk->enable == NULL)
 		clk->enable = clk_null_enable;
 
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
new file mode 100644
index 00000000000..e2f604b51c8
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb-hsotg.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
new file mode 100644
index 00000000000..2ee85abed6d
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C_PA_USBHOST,
+		.end   = S3C_PA_USBHOST + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
new file mode 100644
index 00000000000..c9db75c06af
--- /dev/null
+++ b/arch/arm/plat-s3c/dma.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index d71dd6d9ce5..260fdc6ad68 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
 	if (!gc->get)
 		gc->get = s3c_gpiolib_get;
 
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
 	/* gpiochip_add() prints own failure message on error. */
 	ret = gpiochip_add(gc);
 	if (ret >= 0)
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a404b0..d847bd476b6 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,12 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					       void (*select)(unsigned selected),
-					       void (*conv)(unsigned d0, unsigned d1),
-					       unsigned int is_ts);
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(unsigned selected),
+			 void (*conv)(unsigned d0, unsigned d1,
+				      unsigned *samples_left),
+			 unsigned int is_ts);
 
 extern void s3c_adc_release(struct s3c_adc_client *client);
 
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index a10622eed43..d86af84b5b8 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -50,6 +50,7 @@ extern struct clk clk_xtal;
 extern struct clk clk_ext;
 
 /* S3C64XX specific clocks */
+extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index e62ae0fcfe5..be541cbba07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 26f0cec3ac0..a0b6768fddc 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
new file mode 100644
index 00000000000..32ff2a92cb3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma-core.h
@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
new file mode 100644
index 00000000000..34dba98f08e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
index 2fc60a580ac..32af612767a 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -20,6 +20,18 @@
  * specific code.
 */
 
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+	void (*save)(struct s3c_gpio_chip *chip);
+	void (*resume)(struct s3c_gpio_chip *chip);
+};
+
 struct s3c_gpio_cfg;
 
 /**
@@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung
  * specific gpios being registered with gpiolib.
@@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
 struct s3c_gpio_chip {
 	struct gpio_chip	chip;
 	struct s3c_gpio_cfg	*config;
+	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
 };
 
 static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
 
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 3779775133a..7a797192fcf 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
 
 extern unsigned long s3c_pm_flags;
 
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
 /* from sleep.S */
 
 extern int  s3c_cpu_save(unsigned long *saveblk);
@@ -88,6 +90,7 @@ struct pm_uart_save {
 	u32	ufcon;
 	u32	umcon;
 	u32	ubrdiv;
+	u32	udivslot;
 };
 
 /* helper functions to save/restore lists of registers. */
@@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
 #endif
 
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
 /* suspend memory checking */
 
 #ifdef CONFIG_S3C2410_PM_CHECK
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 487d7d2a7e1..66af75a5cdd 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -189,6 +189,11 @@
 
 #define S3C2443_DIVSLOT		  (0x2C)
 
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP		0x30
+#define S3C64XX_UINTSP		0x34
+#define S3C64XX_UINTM		0x38
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index c4ca3920ca4..f615308ccdf 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif  /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
 #ifdef CONFIG_S3C6410_SETUP_SDHCI
 extern char *s3c6410_hsmmc_clksrcs[4];
 
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
 extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   void __iomem *r,
 					   struct mmc_ios *ios,
@@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 static inline void s3c6410_default_sdhci0(void)
 {
 	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
@@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void)
 {
 	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
new file mode 100644
index 00000000000..dd04db04310
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hostg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
new file mode 100644
index 00000000000..54b762acb5a
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -0,0 +1,49 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+	struct clk *wdtclk;
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
new file mode 100644
index 00000000000..cfd326a8b69
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+	.save	= s3c_gpio_pm_1bit_save,
+	.resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+	.save	= s3c_gpio_pm_2bit_save,
+	.resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	s3c_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		s3c_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+	.save	= s3c_gpio_pm_4bit_save,
+	.resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 061182ca66e..8d97db2c7a0 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -21,11 +21,10 @@
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 #include <asm/irq.h>
 
@@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void)
 
 /* Save the UART configurations if we are configured for debug. */
 
+unsigned char pm_uart_udivslot;
+
 #ifdef CONFIG_S3C2410_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
 }
 
 static void s3c_pm_save_uarts(void)
@@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 {
 	void __iomem *regs = S3C_VA_UARTx(uart);
 
+	s3c_pm_arch_update_uart(regs, save);
+
 	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
 	__raw_writel(save->ucon,  regs + S3C2410_UCON);
 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
 }
 
 static void s3c_pm_restore_uarts(void)
@@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2c8a2f5d75f..5b0bc914f58 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -71,6 +71,7 @@ config PM_SIMTEC
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C2410
+	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
 	  use the S3C2410's DMA system to move data to and from the
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 91adfa71c17..ee1baf11ad9 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
 	unsigned char		 channel;
 
 	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2);
+	void	(*convert_cb)(unsigned val1, unsigned val2,
+			      unsigned *samples_left);
 };
 
 struct adc_device {
@@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
 					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1),
+					void (*conv)(unsigned d0, unsigned d1,
+						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
@@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	data1 = readl(adc->regs + S3C2410_ADCDAT1);
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+	client->nr_samples--;
+	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
 
-	if (--client->nr_samples > 0) {
+	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
 		client->select_cb(1);
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347cec20..aa119863c5c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
@@ -47,27 +48,27 @@
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
+	.gpio		= S3C2410_GPF(4),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
+	.gpio		= S3C2410_GPF(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
+	.gpio		= S3C2410_GPF(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
+	.gpio		= S3C2410_GPF(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
 
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 16ac01d9b8a..4eb378c89a3 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
 struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index aee2aeb46c6..196b1912365 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -31,10 +31,10 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
-
 #include <mach/map.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
@@ -44,8 +44,6 @@ static int dma_channels;
 
 static struct s3c24xx_dma_selection dma_sel;
 
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 #define dbg_showchan(chan) do { } while(0)
 #endif /* CONFIG_S3C2410_DMA_DEBUG */
 
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
 /* s3c2410_dma_stats_timeout
  *
  * Update DMA stats from timeout info
@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 	return 0;
 }
 
-
-
 /* s3c2410_dma_loadbuffer
  *
  * load a buffer, and update the channel state
@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
 
 int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
 
 	if (chan == NULL)
@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 	chan->irq_claimed = 0;
 
 	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
+		s3c_dma_chan_map[channel] = NULL;
 
 	local_irq_restore(flags);
 
@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 int
 s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
 /* s3c2410_dma_config
  *
  * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
 */
 
 int s3c2410_dma_config(unsigned int channel,
-		       int xferunit,
-		       int dcon)
+		       int xferunit)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int dcon;
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __func__, channel, xferunit, dcon);
@@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
 
 	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
-	dcon |= chan->dcon & dma_sel.dcon_mask;
+	dcon = chan->dcon & dma_sel.dcon_mask;
 
 	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
+	switch (chan->req_ch) {
+	case DMACH_I2S_IN:
+	case DMACH_I2S_OUT:
+	case DMACH_PCM_IN:
+	case DMACH_PCM_OUT:
+	case DMACH_MIC_IN:
+	default:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_SDI:
+		/* note, ensure if need HANDSHAKE or not */
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_XD0:
+	case DMACH_XD1:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_HCLK;
+		break;
+	}
+
 	switch (xferunit) {
 	case 1:
 		dcon |= S3C2410_DCON_BYTE;
@@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
 
 EXPORT_SYMBOL(s3c2410_dma_config);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
 /* s3c2410_dma_devconfig
  *
@@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
  * source:    S3C2410_DMASRC_HW: source is hardware
  *            S3C2410_DMASRC_MEM: source is memory
  *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=source is AHB, 1=source is APB
- *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(int channel,
 			  enum s3c2410_dmasrc source,
-			  int hwcfg,
 			  unsigned long devaddr)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int hwcfg;
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __func__, (int)source, hwcfg, devaddr);
+	pr_debug("%s: source=%d, devaddr=%08lx\n",
+		 __func__, (int)source, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
-	chan->hw_cfg = hwcfg;
+
+	switch (chan->req_ch) {
+	case DMACH_XD0:
+	case DMACH_XD1:
+		hwcfg = 0; /* AHB */
+		break;
+
+	default:
+		hwcfg = S3C2410_DISRCC_APB;
+	}
+
+	/* always assume our peripheral desintation is a fixed
+	 * address in memory. */
+	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
 	case S3C2410_DMASRC_HW:
@@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1235,7 +1195,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
 
 EXPORT_SYMBOL(s3c2410_dma_getposition);
 
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
 {
 	return container_of(dev, struct s3c2410_dma_chan, dev);
 }
@@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
-	s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
-	s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+	s3c2410_dma_config(no, cp->xfer_unit);
+	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
 
 	/* re-select the dma source for this channel */
 
@@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
  found:
 	dmach = &s3c2410_chans[ch];
 	dmach->map = ch_map;
-	dma_chan_map[channel] = dmach;
+	dmach->req_ch = channel;
+	s3c_dma_chan_map[channel] = dmach;
 
 	/* select the channel */
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 4a899c279eb..95df059b5a1 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 
 int s3c2410_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
+	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+		return -EINVAL;	/* not valid interrupts */
 
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
+	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+		return -EINVAL;	/* not valid pin */
 
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+	if (pin < S3C2410_GPF(4))
+		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
 
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+	if (pin < S3C2410_GPG(0))
+		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
 
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
-	if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
-		return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
-	if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
-		return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
-	if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
-		return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 5c0491bf738..6d7a961d326 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -22,6 +23,7 @@
 #include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 
@@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.base	= S3C2410_GPACON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
-			.base			= S3C2410_GPA0,
+			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
 			.ngpio			= 24,
@@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[1] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.base	= S3C2410_GPBCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPB0,
+			.base			= S3C2410_GPB(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
 		},
 	},
 	[2] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.base	= S3C2410_GPCCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPC0,
+			.base			= S3C2410_GPC(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
 		},
 	},
 	[3] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.base	= S3C2410_GPDCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPD0,
+			.base			= S3C2410_GPD(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
 		},
 	},
 	[4] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.base	= S3C2410_GPECON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPE0,
+			.base			= S3C2410_GPE(0),
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
 		},
 	},
 	[5] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.base	= S3C2410_GPFCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPF0,
+			.base			= S3C2410_GPF(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
@@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[6] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.base	= S3C2410_GPGCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPG0,
+			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
-			.ngpio			= 10,
+			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
+	}, {
+		.base	= S3C2410_GPHCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPH(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOH",
+			.ngpio			= 11,
+		},
 	},
 };
 
@@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
index c78efe316fc..9565ead1bc9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,8 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/dma-core.h>
+
 extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
 #define DMA_CH_NEVER		(1<<30)
@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
 	const char		*name;
 	struct s3c24xx_dma_addr  hw_addr;
 
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
 };
 
 struct s3c24xx_dma_selection {
@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
 */
 
 struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
 	unsigned int	flags;				/* flags */
 };
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index eed8f78e759..c4d133436fc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -58,7 +58,6 @@
 #define S3C24XX_SZ_SPI		SZ_1M
 #define S3C24XX_SZ_SDI		SZ_1M
 #define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_USBHOST	SZ_1M
 
 /* GPIO ports */
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
index c75882113e0..fb45dd9adca 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
 				s3c_irqwake_eintmask);
 }
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
new file mode 100644
index 00000000000..3bc0a216df9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -0,0 +1,145 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1<<0)
+#define S3C2410_DISRCC_APB		(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP		(1<<2)
+#define S3C2410_DMASKTRIG_ON		(1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
+
+#define S3C2410_DCON_DEMAND		(0<<31)
+#define S3C2410_DCON_HANDSHAKE		(1<<31)
+#define S3C2410_DCON_SYNC_PCLK		(0<<30)
+#define S3C2410_DCON_SYNC_HCLK		(1<<30)
+
+#define S3C2410_DCON_INTREQ		(1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
+#define S3C2410_DCON_CH0_UART0		(1<<24)
+#define S3C2410_DCON_CH0_SDI		(2<<24)
+#define S3C2410_DCON_CH0_TIMER		(3<<24)
+#define S3C2410_DCON_CH0_USBEP1		(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
+#define S3C2410_DCON_CH1_UART1		(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
+#define S3C2410_DCON_CH1_SPI		(3<<24)
+#define S3C2410_DCON_CH1_USBEP2		(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
+#define S3C2410_DCON_CH2_SDI		(2<<24)
+#define S3C2410_DCON_CH2_TIMER		(3<<24)
+#define S3C2410_DCON_CH2_USBEP3		(4<<24)
+
+#define S3C2410_DCON_CH3_UART2		(0<<24)
+#define S3C2410_DCON_CH3_SDI		(1<<24)
+#define S3C2410_DCON_CH3_SPI		(2<<24)
+#define S3C2410_DCON_CH3_TIMER		(3<<24)
+#define S3C2410_DCON_CH3_USBEP4		(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7<<24)
+
+#define S3C2410_DCON_BYTE		(0<<20)
+#define S3C2410_DCON_HALFWORD		(1<<20)
+#define S3C2410_DCON_WORD		(2<<20)
+
+#define S3C2410_DCON_AUTORELOAD		(0<<22)
+#define S3C2410_DCON_NORELOAD		(1<<22)
+#define S3C2410_DCON_HWTRIG		(1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT		(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
+#define S3C2440_DCON_CH0_PCMIN		(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
+#define S3C2440_DCON_CH1_SDI		(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5<<24)
+#define S3C2440_DCON_CH2_MICIN		(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN		(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 062a29339a9..56e5253ca02 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -30,6 +30,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
@@ -75,43 +76,10 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_CLKSLOW),
 };
 
-static struct gpio_sleep {
-	void __iomem	*base;
-	unsigned int	 gpcon;
-	unsigned int	 gpdat;
-	unsigned int	 gpup;
-} gpio_save[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-	},
-	[7] = {
-		.base	= S3C2410_GPHCON,
-	},
-};
-
 static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void)
 	 * and then configure it as an input if it is not
 	*/
 
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
-	}
-
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 	}
-}
-
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON	(S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	unsigned int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		void __iomem *base = gps->base;
-
-		gps->gpcon = __raw_readl(base + OFFS_CON);
-		gps->gpdat = __raw_readl(base + OFFS_DAT);
-
-		if (gpio > 0)
-			gps->gpup = __raw_readl(base + OFFS_UP);
 
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 	}
 }
 
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
-	void __iomem *base = gps->base;
-	unsigned long gps_gpcon = gps->gpcon;
-	unsigned long gps_gpdat = gps->gpdat;
-	unsigned long old_gpcon;
-	unsigned long old_gpdat;
-	unsigned long old_gpup = 0x0;
-	unsigned long gpcon;
-	int nr;
-
-	old_gpcon = __raw_readl(base + OFFS_CON);
-	old_gpdat = __raw_readl(base + OFFS_DAT);
-
-	if (base == S3C2410_GPACON) {
-		/* GPACON only has one bit per control / data and no PULLUPs.
-		 * GPACON[x] = 0 => Output, 1 => SFN */
-
-		/* first set all SFN bits to SFN */
-
-		gpcon = old_gpcon | gps->gpcon;
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* now set all the other bits */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-	} else {
-		unsigned long old, new, mask;
-		unsigned long change_mask = 0x0;
-
-		old_gpup = __raw_readl(base + OFFS_UP);
-
-		/* Create a change_mask of all the items that need to have
-		 * their CON value changed before their DAT value, so that
-		 * we minimise the work between the two settings.
-		 */
-
-		for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-			old = (old_gpcon & mask) >> nr;
-			new = (gps_gpcon & mask) >> nr;
-
-			/* If there is no change, then skip */
-
-			if (old == new)
-				continue;
-
-			/* If both are special function, then skip */
-
-			if (is_sfn(old) && is_sfn(new))
-				continue;
-
-			/* Change is IN => OUT, do not change now */
-
-			if (is_in(old) && is_out(new))
-				continue;
-
-			/* Change is SFN => OUT, do not change now */
-
-			if (is_sfn(old) && is_out(new))
-				continue;
-
-			/* We should now be at the case of IN=>SFN,
-			 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-			change_mask |= mask;
-		}
-
-		/* Write the new CON settings */
-
-		gpcon = old_gpcon & ~change_mask;
-		gpcon |= gps_gpcon & change_mask;
-
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* Now change any items that require DAT,CON */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-		__raw_writel(gps->gpup, base + OFFS_UP);
-	}
-
-	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
-		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		s3c2410_pm_restore_gpio(gpio, gps);
-	}
-}
 
 void s3c_pm_restore_core(void)
 {
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index d62b7e7fb35..71a6accf114 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -11,6 +11,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 
 struct platform_device;
 
@@ -20,6 +21,6 @@ struct platform_device;
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cbb53d..9edf7894eed 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e549f..f34d0fc69ad 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a00a7d..5ebd8b425a5 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
 
@@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK
 	  Common clock support code for the S3C6400 that is shared
 	  by other CPUs in the series, such as the S3C6410.
 
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79bf8f3..2ed5df34f9e 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,8 +24,19 @@ obj-y				+= gpiolib.o
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index ad1b9682c9c..0bc2fa1dfc4 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -27,6 +27,12 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
 struct clk clk_27m = {
 	.name		= "clk_27m",
 	.id		= -1,
@@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_48m,
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
 	},
 };
 
@@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = {
 	&clk_epll,
 	&clk_27m,
 	&clk_48m,
+	&clk_h2,
 };
 
 void __init s3c64xx_register_clocks(void)
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 91f49a3a665..b1fdd83940a 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	iotable_init(mach_desc, size);
 
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
 	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
new file mode 100644
index 00000000000..67aa93dbb69
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -0,0 +1,722 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+	/* note, we currently do not bother to work out which buffer
+	 * or buffers have been completed since the last tc-irq. */
+
+	if (chan->callback_fn)
+		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			s3c64xx_dma_tcirq(dmac, offs);
+		}
+
+		if (errstat & bit) {
+			s3c64xx_dma_errirq(dmac, offs);
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index ee9188add8f..da7b60ee5e6 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -57,7 +57,7 @@
 #if 1
 #define gpio_dbg(x...) do { } while(0)
 #else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
 #endif
 
 /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
@@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 }
 
 static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
 }
 
 static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
 	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
 			    s3c64xx_gpiolib_add_4bit2);
 
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
new file mode 100644
index 00000000000..0c30dd98672
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
index 81549516572..2ba1767512d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
@@ -61,14 +61,14 @@
 #define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
 #define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
 
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
 
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index f865bf4d709..743a70094d0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -157,6 +157,7 @@
 
 #define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
 #define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
 
 /* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
  * that they are sourced from the GPIO pins but with a different scheme for
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
new file mode 100644
index 00000000000..d347de3ba0d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index b1082c16324..52836d41e33 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -32,6 +32,7 @@
 #define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index 571eaa2e54f..11f2e1e119b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -15,12 +15,13 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
 extern void s3c6400_init_clocks(int xtal);
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 47e5155bb13..f81b7b818ba 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -26,6 +27,7 @@
 
 #include <mach/map.h>
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
@@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = {
 	.mask_ack	= s3c_irq_eint_maskack,
 	.ack		= s3c_irq_eint_ack,
 	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
new file mode 100644
index 00000000000..ca523b5d4c1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f22edf7c2d2..8dc5b6da978 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -14,12 +14,14 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
+#include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
 #include <plat/cpu.h>
 
@@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
 }
 
 /* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
 
 static void s3c_irq_uart_mask(unsigned int irq)
 {
@@ -233,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
 	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
 
 	/* add the timer sub-irqs */
 
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
new file mode 100644
index 00000000000..07a6516a4f3
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 05b17528041..1debc1f9f98 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = {
 	.sources	= &clk_src_mpll,
 };
 
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s3c64xx_clk_arm_get_rate,
+	.set_rate	= s3c64xx_clk_arm_set_rate,
+	.round_rate	= s3c64xx_clk_arm_round_rate,
+};
+
 static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -520,6 +579,33 @@ static struct clksrc_clk clk_irda = {
 	.reg_divider	= S3C_CLK_DIV2,
 };
 
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+	.clk	= {
+		.name		= "camera",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= 0,
+	.mask		= 0,
+	.sources	= &clkset_camif,
+	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
+	.reg_divider	= S3C_CLK_DIV0,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -536,6 +622,7 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_audio0,
 	&clk_audio1,
 	&clk_irda,
+	&clk_camif,
 };
 
 static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -608,6 +695,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	clk_fout_epll.rate = epll;
 	clk_fout_apll.rate = apll;
 
+	clk_h2.rate = hclk2;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
@@ -635,14 +723,30 @@ static struct clk *clks[] __initdata = {
 	&clk_audio0.clk,
 	&clk_audio1.clk,
 	&clk_irda.clk,
+	&clk_camif.clk,
+	&clk_arm,
 };
 
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 {
 	struct clk *clkp;
 	int ret;
 	int ptr;
 
+	armclk_mask = armclk_divlimit;
+
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
 		clkp = clks[ptr];
 		ret = s3c24xx_register_clock(clkp);
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..5417123b0ac
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
new file mode 100644
index 00000000000..8e71fe90a37
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
new file mode 100644
index 00000000000..2cf37c35951
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_STMP3XXX
+
+menu "Freescale STMP3xxx implementations"
+
+choice
+	prompt "Select STMP3xxx chip family"
+
+config ARCH_STMP37XX
+	bool "Freescale SMTP37xx"
+	select CPU_ARM926T
+	---help---
+	 STMP37xx refers to 3700 through 3769 chips
+
+config ARCH_STMP378X
+	bool "Freescale STMP378x"
+	select CPU_ARM926T
+	---help---
+	 STMP378x refers to 3780 through 3789 chips
+
+endchoice
+
+choice
+	prompt "Select STMP3xxx board type"
+
+config MACH_STMP37XX
+	depends on ARCH_STMP37XX
+	bool "Freescale STMP37xx development board"
+
+config MACH_STMP378X
+	depends on ARCH_STMP378X
+	bool "Freescale STMP378x development board"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile
new file mode 100644
index 00000000000..31dd518f37a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+# Object file lists.
+obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
new file mode 100644
index 00000000000..5d2f19a09e4
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -0,0 +1,1135 @@
+/*
+ * Clock manipulation routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/clkdev.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static struct clk osc_24M;
+static struct clk pll_clk;
+static struct clk cpu_clk;
+static struct clk hclk;
+
+static int propagate_rate(struct clk *);
+
+static inline int clk_is_busy(struct clk *clk)
+{
+	return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk) && clk->ops;
+}
+
+static int std_clk_enable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg &= ~(1 << clk->enable_shift);
+		else
+			clk_reg |= (1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		if (clk->enable_wait)
+			udelay(clk->enable_wait);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int std_clk_disable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg |= (1 << clk->enable_shift);
+		else
+			clk_reg &= ~(1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int io_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_frac, clkctrl_frac;
+	int i, ret = 0, mask = 0x1f;
+
+	clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
+
+	if (clkctrl_frac < 18 || clkctrl_frac > 35) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+	__raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
+				clk->scale_reg);
+	if (clk->busy_reg) {
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
+	}
+out:
+	return ret;
+}
+
+static long io_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+	int mask = 0x1f;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long per_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	if (clk->enable_reg &&
+			!(__raw_readl(clk->enable_reg) & clk->enable_shift))
+		clk->rate = 0;
+	else {
+		div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+		if (div)
+			rate /= div;
+		clk->rate = rate;
+	}
+
+	return clk->rate;
+}
+
+static int per_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = -EINVAL;
+	int div = (clk->parent->rate + rate - 1) / rate;
+	u32 reg_frac;
+	const int mask = 0xff;
+	int try = 10;
+	int i = -1;
+
+	if (div == 0 || div > mask)
+		goto out;
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+
+	while (try--) {
+		__raw_writel(reg_frac | (div << clk->scale_shift),
+				clk->scale_reg);
+
+		if (clk->busy_reg) {
+			for (i = 10000; i; i--)
+				if (!clk_is_busy(clk))
+					break;
+		}
+		if (i)
+			break;
+	}
+
+	if (!i)
+		ret = -ETIMEDOUT;
+	else
+		ret = 0;
+
+out:
+	if (ret != 0)
+		printk(KERN_ERR "%s: error %d\n", __func__, ret);
+	return ret;
+}
+
+static long lcdif_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	if (div) {
+		rate /= div;
+		div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
+			BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
+		rate /= div;
+	}
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int lcdif_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = 0;
+	/*
+	 * On 3700, we can get most timings exact by modifying ref_pix
+	 * and the divider, but keeping the phase timings at 1 (2
+	 * phases per cycle).
+	 *
+	 * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
+	 * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
+	 *
+	 * ns_cycle >= 2*18e3/(18*480) = 25/6
+	 * ns_cycle <= 2*35e3/(18*480) = 875/108
+	 *
+	 * Multiply the ns_cycle by 'div' to lengthen it until it fits the
+	 * bounds. This is the divider we'll use after ref_pix.
+	 *
+	 * 6 * ns_cycle >= 25 * div
+	 * 108 * ns_cycle <= 875 * div
+	 */
+	u32 ns_cycle = 1000000 / rate;
+	u32 div, reg_val;
+	u32 lowest_result = (u32) -1;
+	u32 lowest_div = 0, lowest_fracdiv = 0;
+
+	for (div = 1; div < 256; ++div) {
+		u32 fracdiv;
+		u32 ps_result;
+		int lower_bound = 6 * ns_cycle >= 25 * div;
+		int upper_bound = 108 * ns_cycle <= 875 * div;
+		if (!lower_bound)
+			break;
+		if (!upper_bound)
+			continue;
+		/*
+		 * Found a matching div. Calculate fractional divider needed,
+		 * rounded up.
+		 */
+		fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
+				ns_cycle + 1000 * div - 1) /
+				(1000 * div);
+		if (fracdiv < 18 || fracdiv > 35) {
+			ret = -EINVAL;
+			goto out;
+		}
+		/* Calculate the actual cycle time this results in */
+		ps_result = 6250 * div * fracdiv / 27;
+
+		/* Use the fastest result that doesn't break ns_cycle */
+		if (ps_result <= lowest_result) {
+			lowest_result = ps_result;
+			lowest_div = div;
+			lowest_fracdiv = fracdiv;
+		}
+	}
+
+	if (div >= 256 || lowest_result == (u32) -1) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
+			"PIXCLK=%uMHz cycle=%u.%03uns\n",
+			lowest_fracdiv, lowest_div,
+			480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
+			lowest_result / 1000, lowest_result % 1000);
+
+	/* Program ref_pix phase fractional divider */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+	reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
+	reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Ungate PFD */
+	stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Program pix divider */
+	reg_val = __raw_readl(clk->scale_reg);
+	reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
+	reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
+	__raw_writel(reg_val, clk->scale_reg);
+
+	/* Wait for divider update */
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	/* Switch to ref_pix source */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+	reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+
+out:
+	return ret;
+}
+
+
+static int cpu_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_val;
+
+	if (rate < 24000)
+		return -EINVAL;
+	else if (rate == 24000) {
+		/* switch to the 24M source */
+		clk_set_parent(clk, &osc_24M);
+	} else {
+		int i;
+		u32 clkctrl_cpu = 1;
+		u32 c = clkctrl_cpu;
+		u32 clkctrl_frac = 1;
+		u32 val;
+		for ( ; c < 0x40; c++) {
+			u32 f = (pll_clk.rate*18/c + rate/2) / rate;
+			int s1, s2;
+
+			if (f < 18 || f > 35)
+				continue;
+			s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
+			s2 = pll_clk.rate*18/c/f - rate;
+			pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
+			if (abs(s1) > abs(s2)) {
+				clkctrl_cpu = c;
+				clkctrl_frac = f;
+			}
+			if (s2 == 0)
+				break;
+		};
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (c == 0x40) {
+			int  d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
+				rate;
+			if (abs(d) > 100 ||
+			    clkctrl_frac < 18 || clkctrl_frac > 35)
+				return -EINVAL;
+		}
+
+		/* 4.6.2 */
+		val = __raw_readl(clk->scale_reg);
+		val &= ~(0x3f << clk->scale_shift);
+		val |= clkctrl_frac;
+		clk_set_parent(clk, &osc_24M);
+		udelay(10);
+		__raw_writel(val, clk->scale_reg);
+		/* ungate */
+		__raw_writel(1<<7, clk->scale_reg + 8);
+		/* write clkctrl_cpu */
+		clk->saved_div = clkctrl_cpu;
+
+		reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+		reg_val &= ~0x3F;
+		reg_val |= clkctrl_cpu;
+		__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+		clk_set_parent(clk, &pll_clk);
+		clk->saved_div = 0;
+		udelay(10);
+	}
+	return 0;
+}
+
+static long cpu_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
+	rate = ((rate + 9) / 10) * 10;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long cpu_round_rate(struct clk *clk, u32 rate)
+{
+	unsigned long r = 0;
+
+	if (rate <= 24000)
+		r = 24000;
+	else {
+		u32 clkctrl_cpu = 1;
+		u32 clkctrl_frac;
+		do {
+			clkctrl_frac =
+				(pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
+			if (clkctrl_frac > 35)
+				continue;
+			if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
+			    rate / 10)
+				break;
+		} while (pll_clk.rate / 2  >= clkctrl_cpu++ * rate);
+		if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
+			clkctrl_cpu--;
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (clkctrl_frac < 18)
+			clkctrl_frac = 18;
+		if (clkctrl_frac > 35)
+			clkctrl_frac = 35;
+
+		r = pll_clk.rate * 18;
+		r /= clkctrl_frac;
+		r /= clkctrl_cpu;
+		r = 10 * ((r + 9) / 10);
+	}
+	return r;
+}
+
+static long emi_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int clkseq_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+	int shift = 8;
+
+	/* bypass? */
+	if (parent == &osc_24M)
+		shift = 4;
+
+	if (clk->bypass_reg) {
+#ifdef CONFIG_ARCH_STMP378X
+		u32 hbus_val, cpu_val;
+
+		if (clk == &cpu_clk && shift == 4) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_CPU);
+
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val |= 1;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		} else if (clk == &cpu_clk && shift == 8) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_CPU);
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			hbus_val |= 2;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			if (clk->saved_div)
+				cpu_val |= clk->saved_div;
+			else
+				cpu_val |= 2;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		}
+#endif
+		__raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int hbus_set_rate(struct clk *clk, u32 rate)
+{
+	u8 div = 0;
+	int is_frac = 0;
+	u32 clkctrl_hbus;
+	struct clk *parent = clk->parent;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			parent->rate);
+
+	if (rate > parent->rate)
+		return -EINVAL;
+
+	if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
+	    parent->rate / rate < 32) {
+		pr_debug("%s: switching to fractional mode\n", __func__);
+		is_frac = 1;
+	}
+
+	if (is_frac)
+		div = (32 * rate + parent->rate / 2) / parent->rate;
+	else
+		div = (parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x1f)
+		return -EINVAL;
+
+	clk_set_parent(&cpu_clk, &osc_24M);
+	udelay(10);
+	clkctrl_hbus = __raw_readl(clk->scale_reg);
+	clkctrl_hbus &= ~0x3f;
+	clkctrl_hbus |= div;
+	clkctrl_hbus |= (is_frac << 5);
+
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	clk_set_parent(&cpu_clk, &pll_clk);
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	udelay(10);
+	return 0;
+}
+
+static long hbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	if (__raw_readl(clk->scale_reg) & 0x20) {
+		rate *= __raw_readl(clk->scale_reg) & 0x1f;
+		rate /= 32;
+	} else
+		rate /= __raw_readl(clk->scale_reg) & 0x1f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int xbus_set_rate(struct clk *clk, u32 rate)
+{
+	u16 div = 0;
+	u32 clkctrl_xbus;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			clk->parent->rate);
+
+	div = (clk->parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x3ff)
+		return -EINVAL;
+
+	clkctrl_xbus = __raw_readl(clk->scale_reg);
+	clkctrl_xbus &= ~0x3ff;
+	clkctrl_xbus |= div;
+	__raw_writel(clkctrl_xbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up xbus divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+static long xbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	rate /= __raw_readl(clk->scale_reg) & 0x3ff;
+	clk->rate = rate;
+
+	return rate;
+}
+
+
+/* Clock ops */
+
+static struct clk_ops std_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= per_get_rate,
+	.set_rate	= per_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops min_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+};
+
+static struct clk_ops cpu_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= cpu_get_rate,
+	.set_rate	= cpu_set_rate,
+	.round_rate	= cpu_round_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops io_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= io_get_rate,
+	.set_rate	= io_set_rate,
+};
+
+static struct clk_ops hbus_ops = {
+	.get_rate	= hbus_get_rate,
+	.set_rate	= hbus_set_rate,
+};
+
+static struct clk_ops xbus_ops = {
+	.get_rate	= xbus_get_rate,
+	.set_rate	= xbus_set_rate,
+};
+
+static struct clk_ops lcdif_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= lcdif_get_rate,
+	.set_rate	= lcdif_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops emi_ops = {
+	.get_rate	= emi_get_rate,
+};
+
+/* List of on-chip clocks */
+
+static struct clk osc_24M = {
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 24000,
+};
+
+static struct clk pll_clk = {
+	.parent		= &osc_24M,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 16,
+	.enable_wait	= 10,
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 480000,
+	.ops		= &min_ops,
+};
+
+static struct clk cpu_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 0,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
+	.busy_bit	= 28,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &cpu_ops,
+};
+
+static struct clk io_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 24,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &io_ops,
+};
+
+static struct clk hclk = {
+	.parent		= &cpu_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.busy_bit	= 29,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &hbus_ops,
+};
+
+static struct clk xclk = {
+	.parent		= &osc_24M,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_bit	= 31,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &xbus_ops,
+};
+
+static struct clk uart_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk audio_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 30,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk pwm_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 29,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk dri_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 28,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk digctl_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 27,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk timer_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 26,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk lcdif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &lcdif_ops,
+};
+
+static struct clk ssp_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.enable_shift	= 31,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 5,
+	.enable_negate	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk gpmi_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 4,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk spdif_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk emi_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 8,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.busy_bit	= 28,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 6,
+	.flags		= ENABLED,
+	.ops		= &emi_ops,
+};
+
+static struct clk ir_clk = {
+	.parent		= &io_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 3,
+	.ops		= &min_ops,
+};
+
+static struct clk saif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 0,
+	.ops		= &std_ops,
+};
+
+static struct clk usb_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 18,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+/* list of all the clocks */
+static struct clk_lookup onchip_clks[] = {
+	{
+		.con_id = "osc_24M",
+		.clk = &osc_24M,
+	}, {
+		.con_id = "pll",
+		.clk = &pll_clk,
+	}, {
+		.con_id = "cpu",
+		.clk = &cpu_clk,
+	}, {
+		.con_id = "hclk",
+		.clk = &hclk,
+	}, {
+		.con_id = "xclk",
+		.clk = &xclk,
+	}, {
+		.con_id = "io",
+		.clk = &io_clk,
+	}, {
+		.con_id = "uart",
+		.clk = &uart_clk,
+	}, {
+		.con_id = "audio",
+		.clk = &audio_clk,
+	}, {
+		.con_id = "pwm",
+		.clk = &pwm_clk,
+	}, {
+		.con_id = "dri",
+		.clk = &dri_clk,
+	}, {
+		.con_id = "digctl",
+		.clk = &digctl_clk,
+	}, {
+		.con_id = "timer",
+		.clk = &timer_clk,
+	}, {
+		.con_id = "lcdif",
+		.clk = &lcdif_clk,
+	}, {
+		.con_id = "ssp",
+		.clk = &ssp_clk,
+	}, {
+		.con_id = "gpmi",
+		.clk = &gpmi_clk,
+	}, {
+		.con_id = "spdif",
+		.clk = &spdif_clk,
+	}, {
+		.con_id = "emi",
+		.clk = &emi_clk,
+	}, {
+		.con_id = "ir",
+		.clk = &ir_clk,
+	}, {
+		.con_id = "saif",
+		.clk = &saif_clk,
+	}, {
+		.con_id = "usb",
+		.clk = &usb_clk,
+	},
+};
+
+static int __init propagate_rate(struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (unlikely(!clk_good(cl->clk)))
+			continue;
+		if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
+			cl->clk->ops->get_rate(cl->clk);
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		}
+	}
+
+	return 0;
+}
+
+/* Exported API */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->ops->get_rate != NULL)
+		return clk->ops->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->ops->round_rate)
+		return clk->ops->round_rate(clk, rate);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static inline int close_enough(long rate1, long rate2)
+{
+	return rate1 && !((rate2 - rate1) * 1000 / rate1);
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
+		goto out;
+
+	else if (!close_enough(clk->rate, rate)) {
+		ret = clk->ops->set_rate(clk, rate);
+		if (ret < 0)
+			goto out;
+		clk->rate = rate;
+		if (clk->flags & RATE_PROPAGATES)
+			propagate_rate(clk);
+	} else
+		ret = 0;
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return -EINVAL;
+
+	if (clk->parent)
+		clk_enable(clk->parent);
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	clk->usage++;
+	if (clk->ops && clk->ops->enable)
+		clk->ops->enable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void local_clk_disable(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	if (clk->usage == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	if (clk->parent)
+		local_clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	if ((--clk->usage) == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	if (clk->parent)
+		clk_disable(clk->parent);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Some additional API */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -ENODEV;
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (!clk->ops->set_parent)
+		goto out;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	ret = clk->ops->set_parent(clk, parent);
+	if (!ret) {
+		/* disable if usage count is 0 */
+		local_clk_disable(parent);
+
+		parent->usage += clk->usage;
+		clk->parent->usage -= clk->usage;
+
+		/* disable if new usage count is 0 */
+		local_clk_disable(clk->parent);
+
+		clk->parent = parent;
+	}
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return NULL;
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+static int __init clk_init(void)
+{
+	struct clk_lookup *cl;
+	struct clk_ops *ops;
+
+	spin_lock_init(&clocks_lock);
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (cl->clk->flags & ENABLED)
+			clk_enable(cl->clk);
+		else
+			local_clk_disable(cl->clk);
+
+		ops = cl->clk->ops;
+
+		if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
+				ops && ops->set_rate)
+			ops->set_rate(cl->clk, cl->clk->rate);
+
+		if (cl->clk->flags & FIXED_RATE) {
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		} else {
+			if (ops && ops->get_rate)
+				ops->get_rate(cl->clk);
+		}
+
+		if (cl->clk->flags & NEEDS_SET_PARENT) {
+			if (ops && ops->set_parent)
+				ops->set_parent(cl->clk, cl->clk->parent);
+		}
+
+		clkdev_add(cl);
+	}
+	return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h
new file mode 100644
index 00000000000..a6611e1a351
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
+#define __ARCH_ARM_STMX3XXX_CLOCK_H__
+
+#ifndef __ASSEMBLER__
+
+struct clk_ops {
+	int (*enable) (struct clk *);
+	int (*disable) (struct clk *);
+	long (*get_rate) (struct clk *);
+	long (*round_rate) (struct clk *, u32);
+	int (*set_rate) (struct clk *, u32);
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+struct clk {
+	struct clk *parent;
+	u32 rate;
+	u32 flags;
+	u8 scale_shift;
+	u8 enable_shift;
+	u8 bypass_shift;
+	u8 busy_bit;
+	s8 usage;
+	int enable_wait;
+	int enable_negate;
+	u32 saved_div;
+	void __iomem *enable_reg;
+	void __iomem *scale_reg;
+	void __iomem *bypass_reg;
+	void __iomem *busy_reg;
+	struct clk_ops *ops;
+};
+
+#endif /* __ASSEMBLER__ */
+
+/* Flags */
+#define RATE_PROPAGATES      (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE      (1<<2)
+#define FIXED_RATE           (1<<3)
+#define ENABLED	             (1<<4)
+#define NEEDS_SET_PARENT     (1<<5)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c
new file mode 100644
index 00000000000..37b8a09148a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/core.c
@@ -0,0 +1,128 @@
+/*
+ * Freescale STMP37XX/STMP378X core routines
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-clkctrl.h>
+
+static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	u32 c;
+	int timeout;
+
+	/* the process of software reset of IP block is done
+	   in several steps:
+
+	   - clear SFTRST and wait for block is enabled;
+	   - clear clock gating (CLKGATE bit);
+	   - set the SFTRST again and wait for block is in reset;
+	   - clear SFTRST and wait for reset completion.
+	*/
+	c = __raw_readl(hwreg);
+	c &= ~(1<<31);		/* clear SFTRST */
+	__raw_writel(c, hwreg);
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<31)) == 0)
+			break;
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when enabling\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	c = __raw_readl(hwreg);
+	c &= ~(1<<30);		/* clear CLKGATE */
+	__raw_writel(c, hwreg);
+
+	if (!just_enable) {
+		c = __raw_readl(hwreg);
+		c |= (1<<31);		/* now again set SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* poll until CLKGATE set */
+			if (__raw_readl(hwreg) & (1<<30))
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when resetting\n",
+					__func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<31);		/* clear SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* still in SFTRST state ? */
+			if ((__raw_readl(hwreg) & (1<<31)) == 0)
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when enabling "
+					"after reset\n", __func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<30);		/* clear CLKGATE */
+		__raw_writel(c, hwreg);
+	}
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<30)) == 0)
+			break;
+
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	int try = 10;
+	int r;
+
+	while (try--) {
+		r = __stmp3xxx_reset_block(hwreg, just_enable);
+		if (!r)
+			break;
+		pr_debug("%s: try %d failed\n", __func__, 10 - try);
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_reset_block);
+
+struct platform_device stmp3xxx_dbguart = {
+	.name = "stmp3xxx-dbguart",
+	.id = -1,
+};
+
+void __init stmp3xxx_init(void)
+{
+	/* Turn off auto-slow and other tricks */
+	stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+
+	stmp3xxx_dma_init();
+}
diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c
new file mode 100644
index 00000000000..68fed4b8746
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/devices.c
@@ -0,0 +1,389 @@
+/*
+* Freescale STMP37XX/STMP378X platform devices
+*
+* Embedded Alley Solutions, Inc <source@embeddedalley.com>
+*
+* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+*/
+
+/*
+* The code contained herein is licensed under the GNU General Public
+* License. You may obtain a copy of the GNU General Public License
+* Version 2 or later at the following locations:
+*
+* http://www.opensource.org/licenses/gpl-license.html
+* http://www.gnu.org/copyleft/gpl.html
+*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-lcdif.h>
+#include <mach/regs-uartapp.h>
+#include <mach/regs-gpmi.h>
+#include <mach/regs-usbctrl.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-rtc.h>
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+static struct resource appuart_resources[] = {
+	{
+		.start = IRQ_UARTAPP_INTERNAL,
+		.end = IRQ_UARTAPP_INTERNAL,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_RX_DMA,
+		.end = IRQ_UARTAPP_RX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_TX_DMA,
+		.end = IRQ_UARTAPP_TX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = REGS_UARTAPP1_PHYS,
+		.end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
+		.flags = IORESOURCE_MEM,
+	}, {
+		/* Rx DMA channel */
+		.start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	}, {
+		/* Tx DMA channel */
+		.start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_appuart = {
+	.name = "stmp3xxx-appuart",
+	.id = 0,
+	.resource = appuart_resources,
+	.num_resources = ARRAY_SIZE(appuart_resources),
+	.dev = {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device stmp3xxx_watchdog = {
+      .name   = "stmp3xxx_wdt",
+      .id     = -1,
+};
+
+static struct resource ts_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_TOUCH_DETECT,
+		.end    = IRQ_TOUCH_DETECT,
+	}, {
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_LRADC_CH5,
+		.end    = IRQ_LRADC_CH5,
+	},
+};
+
+struct platform_device stmp3xxx_touchscreen = {
+	.name		= "stmp3xxx_ts",
+	.id		= -1,
+	.resource	= ts_resource,
+	.num_resources	= ARRAY_SIZE(ts_resource),
+};
+
+/*
+* Keypad device
+*/
+struct platform_device stmp3xxx_keyboard = {
+	.name		= "stmp3xxx-keyboard",
+	.id		= -1,
+};
+
+static struct resource gpmi_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = REGS_GPMI_PHYS,
+		.end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
+	}, {
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_GPMI_DMA,
+		.end = IRQ_GPMI_DMA,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
+		.end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
+	},
+};
+
+struct platform_device stmp3xxx_gpmi = {
+	.name = "gpmi",
+	.id = -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = gpmi_resources,
+	.num_resources = ARRAY_SIZE(gpmi_resources),
+};
+
+static struct resource mmc1_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+	}, {
+		.flags	= IORESOURCE_DMA,
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP_ERROR,
+		.end	= IRQ_SSP_ERROR,
+	},
+};
+
+struct platform_device stmp3xxx_mmc = {
+	.name	= "stmp3xxx-mmc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = mmc1_resource,
+	.num_resources = ARRAY_SIZE(mmc1_resource),
+};
+
+static struct resource usb_resources[] = {
+	{
+		.start	= REGS_USBCTRL_PHYS,
+		.end	= REGS_USBCTRL_PHYS + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_USB_CTRL,
+		.end	= IRQ_USB_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_udc = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource = usb_resources,
+	.num_resources = ARRAY_SIZE(usb_resources),
+};
+
+struct platform_device stmp3xxx_ehci = {
+	.name		= "fsl-ehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= usb_resources,
+	.num_resources	= ARRAY_SIZE(usb_resources),
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start	= REGS_RTC_PHYS,
+		.end	= REGS_RTC_PHYS + REGS_RTC_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_RTC_ALARM,
+		.end	= IRQ_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_RTC_1MSEC,
+		.end	= IRQ_RTC_1MSEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_rtc = {
+	.name		= "stmp3xxx-rtc",
+	.id		= -1,
+	.resource	= rtc_resources,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+};
+
+static struct resource ssp1_resources[] = {
+	{
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource ssp2_resources[] = {
+	{
+		.start	= REGS_SSP2_PHYS,
+		.end	= REGS_SSP2_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP2_DMA,
+		.end	= IRQ_SSP2_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_spi1 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp1_resources,
+	.num_resources = ARRAY_SIZE(ssp1_resources),
+};
+
+struct platform_device stmp3xxx_spi2 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 2,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp2_resources,
+	.num_resources = ARRAY_SIZE(ssp2_resources),
+};
+
+static struct resource fb_resource[] = {
+	{
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_DMA,
+		.end	= IRQ_LCDIF_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_ERROR,
+		.end	= IRQ_LCDIF_ERROR,
+	}, {
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_LCDIF_PHYS,
+		.end	= REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
+	},
+};
+
+struct platform_device stmp3xxx_framebuffer = {
+	.name		= "stmp3xxx-fb",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(fb_resource),
+	.resource	= fb_resource,
+};
+
+#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2)			\
+	static char *cmdline_device_##name;			\
+	static int cmdline_device_##name##_setup(char *dev)	\
+	{							\
+		cmdline_device_##name = dev + 1;		\
+		return 0;					\
+	}							\
+	__setup(#name, cmdline_device_##name##_setup);		\
+	int stmp3xxx_##name##_device_register(void)		\
+	{							\
+		struct platform_device *d = NULL;		\
+		if (!cmdline_device_##name ||			\
+			!strcmp(cmdline_device_##name, #dev1))	\
+				d = &stmp3xxx_##dev1;		\
+		else if (!strcmp(cmdline_device_##name, #dev2))	\
+				d = &stmp3xxx_##dev2;		\
+		else						\
+			printk(KERN_ERR"Unknown %s assignment '%s'.\n",	\
+				#name, cmdline_device_##name);	\
+		return d ? platform_device_register(d) : -ENOENT;	\
+	}
+
+CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
+CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
+
+struct platform_device stmp3xxx_backlight = {
+	.name		= "stmp3xxx-bl",
+	.id		= -1,
+};
+
+struct platform_device stmp3xxx_rotdec = {
+	.name	= "stmp3xxx-rotdec",
+	.id	= -1,
+};
+
+struct platform_device stmp3xxx_persistent = {
+	.name			= "stmp3xxx-persistent",
+	.id			= -1,
+};
+
+struct platform_device stmp3xxx_dcp_bootstream = {
+	.name			= "stmp3xxx-dcpboot",
+	.id			= -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dcp_resources[] = {
+	{
+		.start = IRQ_DCP_VMI,
+		.end = IRQ_DCP_VMI,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DCP,
+		.end = IRQ_DCP,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_dcp = {
+	.name			= "stmp3xxx-dcp",
+	.id			= -1,
+	.resource		= dcp_resources,
+	.num_resources		= ARRAY_SIZE(dcp_resources),
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource battery_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_VDD5V,
+		.end    = IRQ_VDD5V,
+	},
+};
+
+struct platform_device stmp3xxx_battery = {
+	.name   = "stmp3xxx-battery",
+	.resource = battery_resource,
+	.num_resources = ARRAY_SIZE(battery_resource),
+};
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
new file mode 100644
index 00000000000..d2f497764dc
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -0,0 +1,463 @@
+/*
+ * DMA helper routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: dmitry pervushin <dpervushin@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/cpufreq.h>
+
+#include <asm/page.h>
+
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-apbh.h>
+
+static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
+static const size_t pool_alignment = 8;
+static struct stmp3xxx_dma_user {
+	void *pool;
+	int inuse;
+	const char *name;
+} channels[MAX_DMA_CHANNELS];
+
+#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
+#define IS_USED(ch) (channels[ch].inuse)
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
+{
+	struct stmp3xxx_dma_user *user;
+	int err = 0;
+
+	user = channels + ch;
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	/* Create a pool to allocate dma commands from */
+	user->pool = dma_pool_create(name, dev, pool_item_size,
+				     pool_alignment, PAGE_SIZE);
+	if (user->pool == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+	user->name = name;
+	user->inuse++;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_request);
+
+int stmp3xxx_dma_release(int ch)
+{
+	struct stmp3xxx_dma_user *user = channels + ch;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	BUG_ON(user->pool == NULL);
+	dma_pool_destroy(user->pool);
+	user->inuse--;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_release);
+
+int stmp3xxx_dma_read_semaphore(int channel)
+{
+	int sem = -1;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBH_CHn_SEMA_PHORE;
+		sem >>= BP_APBH_CHn_SEMA_PHORE;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBX_CHn_SEMA_PHORE;
+		sem >>= BP_APBX_CHn_SEMA_PHORE;
+		break;
+	default:
+		BUG();
+	}
+	return sem;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
+
+int stmp3xxx_dma_allocate_command(int channel,
+				  struct stmp3xxx_dma_descriptor *descriptor)
+{
+	struct stmp3xxx_dma_user *user = channels + channel;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+	if (descriptor == NULL) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* Allocate memory for a command from the buffer */
+	descriptor->command =
+	    dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
+
+	/* Check it worked */
+	if (!descriptor->command) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	memset(descriptor->command, 0, pool_item_size);
+out:
+	WARN_ON(err);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
+
+int stmp3xxx_dma_free_command(int channel,
+			      struct stmp3xxx_dma_descriptor *descriptor)
+{
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	/* Return the command memory to the pool */
+	dma_pool_free(channels[channel].pool, descriptor->command,
+		      descriptor->handle);
+
+	/* Initialise descriptor so we're not tempted to use it */
+	descriptor->command = NULL;
+	descriptor->handle = 0;
+	descriptor->virtual_buf_ptr = NULL;
+	descriptor->next_descr = NULL;
+
+	WARN_ON(err);
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_command);
+
+void stmp3xxx_dma_go(int channel,
+		     struct stmp3xxx_dma_descriptor *head, u32 semaphore)
+{
+	int ch = STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c, *s;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
+		break;
+
+	default:
+		return;
+	}
+
+	/* Set next command */
+	__raw_writel(head->handle, c);
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	__raw_writel(semaphore, s);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_go);
+
+int stmp3xxx_dma_running(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBH_CHn_SEMA_PHORE;
+
+	case STMP3XXX_BUS_APBX:
+		return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBX_CHn_SEMA_PHORE;
+	default:
+		BUG();
+		return 0;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_dma_running);
+
+/*
+ * Circular dma chain management
+ */
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	int i;
+
+	for (i = 0; i < chain->total_count; i++)
+		stmp3xxx_dma_free_command(
+			STMP3XXX_DMA(chain->channel, chain->bus),
+			&chain->chain[i]);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
+
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items)
+{
+	int i;
+	int err = 0;
+
+	if (items == 0)
+		return err;
+
+	for (i = 0; i < items; i++) {
+		err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
+		if (err) {
+			WARN_ON(err);
+			/*
+			 * Couldn't allocate the whole chain.
+			 * deallocate what has been allocated
+			 */
+			if (i) {
+				do {
+					stmp3xxx_dma_free_command(ch,
+								  &descriptors
+								  [i]);
+				} while (i-- >= 0);
+			}
+			return err;
+		}
+
+		/* link them! */
+		if (i > 0) {
+			descriptors[i - 1].next_descr = &descriptors[i];
+			descriptors[i - 1].command->next =
+						descriptors[i].handle;
+		}
+	}
+
+	/* make list circular */
+	descriptors[items - 1].next_descr = &descriptors[0];
+	descriptors[items - 1].command->next = descriptors[0].handle;
+
+	chain->total_count = items;
+	chain->chain = descriptors;
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = items;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+	chain->bus = STMP3XXX_DMA_BUS(ch);
+	chain->channel = STMP3XXX_DMA_CHANNEL(ch);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
+
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = chain->total_count;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+}
+EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
+
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	BUG_ON(chain->cooked_count < count);
+
+	chain->cooked_count -= count;
+	chain->cooked_index += count;
+	chain->cooked_index %= chain->total_count;
+	chain->free_count += count;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_free);
+
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	void __iomem *c;
+	u32 mask_clr, mask;
+	BUG_ON(chain->free_count < count);
+
+	chain->free_count -= count;
+	chain->free_index += count;
+	chain->free_index %= chain->total_count;
+	chain->active_count += count;
+
+	switch (chain->bus) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	stmp3xxx_clearl(mask_clr, c);
+	stmp3xxx_setl(mask, c);
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_active);
+
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
+{
+	unsigned cooked;
+
+	cooked = chain->active_count -
+	  stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
+
+	chain->active_count -= cooked;
+	chain->active_index += cooked;
+	chain->active_index %= chain->total_count;
+
+	chain->cooked_count += cooked;
+
+	return cooked;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
+
+void stmp3xxx_dma_set_alt_target(int channel, int function)
+{
+#if defined(CONFIG_ARCH_STMP37XX)
+	unsigned bits = 4;
+#elif defined(CONFIG_ARCH_STMP378X)
+	unsigned bits = 2;
+#else
+#error wrong arch
+#endif
+	int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
+	unsigned mask = (1<<bits) - 1;
+	void __iomem *c;
+
+	BUG_ON(function < 0 || function >= (1<<bits));
+	pr_debug("%s: channel = %d, using mask %x, "
+		 "shift = %d\n", __func__, channel, mask, shift);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_DEVSEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_DEVSEL;
+		break;
+	default:
+		BUG();
+	}
+	stmp3xxx_clearl(mask << shift, c);
+	stmp3xxx_setl(mask << shift, c);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
+
+void stmp3xxx_dma_suspend(void)
+{
+	stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+void stmp3xxx_dma_resume(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+struct dma_notifier_block {
+	struct notifier_block nb;
+	void *data;
+};
+
+static int dma_cpufreq_notifier(struct notifier_block *self,
+				unsigned long phase, void *p)
+{
+	switch (phase) {
+	case CPUFREQ_POSTCHANGE:
+		stmp3xxx_dma_resume();
+		break;
+
+	case CPUFREQ_PRECHANGE:
+		stmp3xxx_dma_suspend();
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct dma_notifier_block dma_cpufreq_nb = {
+	.nb = {
+		.notifier_call = dma_cpufreq_notifier,
+	},
+};
+#endif /* CONFIG_CPU_FREQ */
+
+void __init stmp3xxx_dma_init(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+#ifdef CONFIG_CPU_FREQ
+	cpufreq_register_notifier(&dma_cpufreq_nb.nb,
+				CPUFREQ_TRANSITION_NOTIFIER);
+#endif /* CONFIG_CPU_FREQ */
+}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
new file mode 100644
index 00000000000..f9c39772d7c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
new file mode 100644
index 00000000000..b4e205b95f2
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * Freescale STMP37XX/STMP378X CPU type detection
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_CPU_H
+#define __ASM_PLAT_CPU_H
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define cpu_is_stmp37xx()	(1)
+#else
+#define cpu_is_stmp37xx()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define cpu_is_stmp378x()	(1)
+#else
+#define cpu_is_stmp378x()	(0)
+#endif
+
+#endif /* __ASM_PLAT_CPU_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..fb3b969bf0a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/*
+ * Debugging macro include header
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		addeq	\rx, \rx, #0x00070000
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x00070000
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #0]		@ data register at 0
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h
new file mode 100644
index 00000000000..7c58557c676
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h
@@ -0,0 +1,153 @@
+/*
+ * Freescale STMP37XX/STMP378X DMA helper interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_DMA_H
+#define __ASM_PLAT_STMP3XXX_DMA_H
+
+#include <linux/platform_device.h>
+#include <linux/dmapool.h>
+
+#if !defined(MAX_PIO_WORDS)
+#define MAX_PIO_WORDS   (15)
+#endif
+
+#define STMP3XXX_BUS_APBH		0
+#define STMP3XXX_BUS_APBX		1
+#define STMP3XXX_DMA_MAX_CHANNEL	16
+#define STMP3XXX_DMA_BUS(dma)		((dma) / 16)
+#define STMP3XXX_DMA_CHANNEL(dma)	((dma) % 16)
+#define STMP3XXX_DMA(channel, bus)	((bus) * 16 + (channel))
+#define MAX_DMA_ADDRESS			0xffffffff
+#define MAX_DMA_CHANNELS		32
+
+struct stmp3xxx_dma_command {
+	u32 next;
+	u32 cmd;
+	union {
+		u32 buf_ptr;
+		u32 alternate;
+	};
+	u32 pio_words[MAX_PIO_WORDS];
+};
+
+struct stmp3xxx_dma_descriptor {
+	struct stmp3xxx_dma_command *command;
+	dma_addr_t handle;
+
+	/* The virtual address of the buffer pointer */
+	void *virtual_buf_ptr;
+	/* The next descriptor in a the DMA chain (optional) */
+	struct stmp3xxx_dma_descriptor *next_descr;
+};
+
+struct stmp37xx_circ_dma_chain {
+	unsigned total_count;
+	struct stmp3xxx_dma_descriptor *chain;
+
+	unsigned free_index;
+	unsigned free_count;
+	unsigned active_index;
+	unsigned active_count;
+	unsigned cooked_index;
+	unsigned cooked_count;
+
+	int bus;
+	unsigned channel;
+};
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->free_index]);
+}
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->cooked_index]);
+}
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
+int stmp3xxx_dma_release(int ch);
+int stmp3xxx_dma_allocate_command(int ch,
+				  struct stmp3xxx_dma_descriptor *descriptor);
+int stmp3xxx_dma_free_command(int ch,
+			      struct stmp3xxx_dma_descriptor *descriptor);
+void stmp3xxx_dma_continue(int channel, u32 semaphore);
+void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
+		     u32 semaphore);
+int stmp3xxx_dma_running(int ch);
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items);
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
+int stmp3xxx_dma_read_semaphore(int ch);
+void stmp3xxx_dma_init(void);
+void stmp3xxx_dma_set_alt_target(int ch, int target);
+void stmp3xxx_dma_suspend(void);
+void stmp3xxx_dma_resume(void);
+
+/*
+ * STMP37xx and STMP378x have different DMA control
+ * registers layout
+ */
+
+void stmp3xxx_arch_dma_freeze(int ch);
+void stmp3xxx_arch_dma_unfreeze(int ch);
+void stmp3xxx_arch_dma_reset_channel(int ch);
+void stmp3xxx_arch_dma_enable_interrupt(int ch);
+void stmp3xxx_arch_dma_clear_interrupt(int ch);
+int stmp3xxx_arch_dma_is_interrupt(int ch);
+
+static inline void stmp3xxx_dma_reset_channel(int ch)
+{
+	stmp3xxx_arch_dma_reset_channel(ch);
+}
+
+
+static inline void stmp3xxx_dma_freeze(int ch)
+{
+	stmp3xxx_arch_dma_freeze(ch);
+}
+
+static inline void stmp3xxx_dma_unfreeze(int ch)
+{
+	stmp3xxx_arch_dma_unfreeze(ch);
+}
+
+static inline void stmp3xxx_dma_enable_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_enable_interrupt(ch);
+}
+
+static inline void stmp3xxx_dma_clear_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_clear_interrupt(ch);
+}
+
+static inline int stmp3xxx_dma_is_interrupt(int ch)
+{
+	return stmp3xxx_arch_dma_is_interrupt(ch);
+}
+
+#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
new file mode 100644
index 00000000000..a8b57925617
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * Freescale STMP37XX/STMP378X GPIO interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#define ARCH_NR_GPIOS	(32 * 3)
+#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
+#define gpio_get_value(gpio) __gpio_get_value(gpio)
+#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
new file mode 100644
index 00000000000..e166432910a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
@@ -0,0 +1,12 @@
+#ifndef __MACH_GPMI_H
+
+#include <linux/mtd/partitions.h>
+#include <mach/regs-gpmi.h>
+
+struct gpmi_platform_data {
+	void *pins;
+	int nr_parts;
+	struct mtd_partition *parts;
+	const char *part_types[];
+};
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
new file mode 100644
index 00000000000..47b8978405b
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * This file contains the hardware definitions of the Freescale STMP3XXX
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 /* VA of IO  */
+#define IO_SIZE			0x00100000                 /* How much? */
+#define IO_START		0x80000000                 /* PA of IO  */
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h
new file mode 100644
index 00000000000..d08b1b7f3d1
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) 	__typesafe_io(a)
+#define __mem_pci(a)	(a)
+#define __mem_isa(a)	(a)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h
new file mode 100644
index 00000000000..7b875a07a1a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
new file mode 100644
index 00000000000..ba81e154376
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
@@ -0,0 +1,14 @@
+#ifndef _MACH_MMC_H
+#define _MACH_MMC_H
+
+#include <mach/regs-ssp.h>
+
+struct stmp3xxxmmc_platform_data {
+	int (*get_wp)(void);
+	unsigned long (*setclock)(void __iomem *base, unsigned long);
+	void (*cmd_pullup)(int);
+	int  (*hw_init)(void);
+	void (*hw_release)(void);
+};
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
new file mode 100644
index 00000000000..cc5af82279a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
@@ -0,0 +1,157 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __PINMUX_H
+#define __PINMUX_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Pin definitions */
+#include "pins.h"
+#include <mach/pins.h>
+
+/*
+ * Each pin may be routed up to four different HW interfaces
+ * including GPIO
+ */
+enum pin_fun {
+	PIN_FUN1 = 0,
+	PIN_FUN2,
+	PIN_FUN3,
+	PIN_GPIO,
+};
+
+/*
+ * Each pin may have different output drive strength in range from
+ * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
+ */
+enum pin_strength {
+	PIN_4MA = 0,
+	PIN_8MA,
+	PIN_12MA,
+	PIN_16MA,
+	PIN_20MA,
+};
+
+/*
+ * Each pin can be programmed for 1.8V or 3.3V
+ */
+enum pin_voltage {
+	PIN_1_8V = 0,
+	PIN_3_3V,
+};
+
+/*
+ * Structure to define a group of pins and their parameters
+ */
+struct pin_desc {
+	unsigned id;
+	enum pin_fun fun;
+	enum pin_strength strength;
+	enum pin_voltage voltage;
+	unsigned pullup:1;
+};
+
+struct pin_group {
+	struct pin_desc *pins;
+	int nr_pins;
+};
+
+/* Set pin drive strength */
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+			   const char *label);
+
+/* Set pin voltage */
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			   const char *label);
+
+/* Enable pull-up resistor for a pin */
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
+
+/*
+ * Request a pin ownership, only one module (identified by @label)
+ * may own a pin.
+ */
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
+
+/* Release pin */
+void stmp3xxx_release_pin(unsigned id, const char *label);
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
+
+/*
+ * Each bank is associated with a number of registers to control
+ * pin function, drive strength, voltage and pull-up reigster. The
+ * number of registers of a given type depends on the number of bits
+ * describin particular pin.
+ */
+#define HW_MUXSEL_NUM		2	/* registers per bank */
+#define HW_MUXSEL_PIN_LEN	2	/* bits per pin */
+#define HW_MUXSEL_PIN_NUM	16	/* pins per register */
+#define HW_MUXSEL_PINFUN_MASK	0x3	/* pin function mask */
+#define HW_MUXSEL_PINFUN_NUM	4	/* four options for a pin */
+
+#define HW_DRIVE_NUM		4	/* registers per bank */
+#define HW_DRIVE_PIN_LEN	4	/* bits per pin */
+#define HW_DRIVE_PIN_NUM	8	/* pins per register */
+#define HW_DRIVE_PINDRV_MASK	0x3	/* pin strength mask - 2 bits */
+#define HW_DRIVE_PINDRV_NUM	5	/* five possible strength values */
+#define HW_DRIVE_PINV_MASK	0x4	/* pin voltage mask - 1 bit */
+
+
+struct stmp3xxx_pinmux_bank {
+	struct gpio_chip chip;
+
+	/* Pins allocation map */
+	unsigned long pin_map;
+
+	/* Pin owner names */
+	const char *pin_labels[32];
+
+	/* Bank registers */
+	void __iomem *hw_muxsel[HW_MUXSEL_NUM];
+	void __iomem *hw_drive[HW_DRIVE_NUM];
+	void __iomem *hw_pull;
+
+	void __iomem *pin2irq,
+		*irqlevel,
+		*irqpolarity,
+		*irqen,
+		*irqstat;
+
+	/* HW MUXSEL register function bit values */
+	u8 functions[HW_MUXSEL_PINFUN_NUM];
+
+	/*
+	 * HW DRIVE register strength bit values:
+	 * 0xff - requested strength is not supported for this bank
+	 */
+	u8 strengths[HW_DRIVE_PINDRV_NUM];
+
+	/* GPIO things */
+	void __iomem *hw_gpio_in,
+		     *hw_gpio_out,
+		     *hw_gpio_doe;
+	int irq, virq;
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start);
+
+#endif /* __PINMUX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h
new file mode 100644
index 00000000000..c573318e1ca
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PINS_H
+#define __ASM_PLAT_PINS_H
+
+#define STMP3XXX_PINID(bank, pin)	(bank * 32 + pin)
+#define STMP3XXX_PINID_TO_BANK(pinid)	(pinid / 32)
+#define STMP3XXX_PINID_TO_PINNUM(pinid)	(pinid % 32)
+
+/*
+ * Special invalid pin identificator to show a pin doesn't exist
+ */
+#define PINID_NO_PIN	STMP3XXX_PINID(0xFF, 0xFF)
+
+#endif /* __ASM_PLAT_PINS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h
new file mode 100644
index 00000000000..7007ddaa91e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PLATFORM_H
+#define __ASM_PLAT_PLATFORM_H
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/sizes.h>
+
+/* Virtual address where registers are mapped */
+#define STMP3XXX_REGS_PHBASE	0x80000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_REGS_BASE	0xF0000000
+#else
+#define STMP3XXX_REGS_BASE	(void __iomem *)0xF0000000
+#endif
+#define STMP3XXX_REGS_SIZE	SZ_1M
+
+/* Virtual address where OCRAM is mapped */
+#define STMP3XXX_OCRAM_PHBASE	0x00000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_OCRAM_BASE	0xf1000000
+#else
+#define STMP3XXX_OCRAM_BASE	(void __iomem *)0xf1000000
+#endif
+#define STMP3XXX_OCRAM_SIZE	(32 * SZ_1K)
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_PRIORITYn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_PRIORITYn_WR
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_INTERRUPTn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_INTERRUPTn_WR
+#endif
+
+#define HW_STMP3XXX_SET		0x04
+#define HW_STMP3XXX_CLR		0x08
+#define HW_STMP3XXX_TOG		0x0c
+
+#ifndef __ASSEMBLER__
+static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_CLR);
+}
+
+static inline void stmp3xxx_setl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_SET);
+}
+#endif
+
+#define BF(value, field) (((value) << BP_##field) & BM_##field)
+
+#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
new file mode 100644
index 00000000000..2e300feaa4c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
@@ -0,0 +1,54 @@
+/*
+ * Freescale STMP37XX/STMP378X core structure and function declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_H
+#define __ASM_PLAT_STMP3XXX_H
+
+#include <linux/irq.h>
+
+extern struct sys_timer stmp3xxx_timer;
+
+void stmp3xxx_init_irq(struct irq_chip *chip);
+void stmp3xxx_init(void);
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
+extern struct platform_device stmp3xxx_dbguart,
+			      stmp3xxx_appuart,
+			      stmp3xxx_watchdog,
+			      stmp3xxx_touchscreen,
+			      stmp3xxx_keyboard,
+			      stmp3xxx_gpmi,
+			      stmp3xxx_mmc,
+			      stmp3xxx_udc,
+			      stmp3xxx_ehci,
+			      stmp3xxx_rtc,
+			      stmp3xxx_spi1,
+			      stmp3xxx_spi2,
+			      stmp3xxx_backlight,
+			      stmp3xxx_rotdec,
+			      stmp3xxx_dcp,
+			      stmp3xxx_dcp_bootstream,
+			      stmp3xxx_persistent,
+			      stmp3xxx_framebuffer,
+			      stmp3xxx_battery;
+int stmp3xxx_ssp1_device_register(void);
+int stmp3xxx_ssp2_device_register(void);
+
+struct pin_group;
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
+
+#endif /* __ASM_PLAT_STMP3XXX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h
new file mode 100644
index 00000000000..28a98888931
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+#include <mach/regs-power.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* Set BATTCHRG to default value */
+	__raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
+
+	/* Set MINPWR to default value   */
+	__raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
+
+	/* Reset digital side of chip (but not power or RTC) */
+	__raw_writel(BM_CLKCTRL_RESET_DIG,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
+
+	/* Should not return */
+}
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h
new file mode 100644
index 00000000000..3373985d7a8
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * System time clock is sourced from the 32k clock
+ */
+#define CLOCK_TICK_RATE		(32768)
diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
new file mode 100644
index 00000000000..f79f5ee56cd
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+/*
+ * Register includes are for when the MMU enabled; we need to define our
+ * own stuff here for pre-MMU use
+ */
+#define UARTDBG_BASE		0x80070000
+#define UART(c)			(((volatile unsigned *)UARTDBG_BASE)[c])
+
+/*
+ * This does not append a newline
+ */
+static void putc(char c)
+{
+	/* Wait for TX fifo empty */
+	while ((UART(6) & (1<<7)) == 0)
+		continue;
+
+	/* Write byte */
+	UART(0) = c;
+
+	/* Wait for last bit to exit the UART */
+	while (UART(6) & (1<<3))
+		continue;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..541b880c186
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define VMALLOC_END       (0xF0000000)
diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c
new file mode 100644
index 00000000000..20de4e0401e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/irq.c
@@ -0,0 +1,51 @@
+/*
+ * Freescale STMP37XX/STMP378X common interrupt handling code
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+
+void __init stmp3xxx_init_irq(struct irq_chip *chip)
+{
+	unsigned int i, lv;
+
+	/* Reset the interrupt controller */
+	stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
+
+	/* Disable all interrupts initially */
+	for (i = 0; i < NR_REAL_IRQS; i++) {
+		chip->mask(i);
+		set_irq_chip(i, chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Ensure vector is cleared */
+	for (lv = 0; lv < 4; lv++)
+		__raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
new file mode 100644
index 00000000000..d4120038220
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -0,0 +1,552 @@
+/*
+ * Freescale STMP378X/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sysdev.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/regs-pinctrl.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+
+#define NR_BANKS ARRAY_SIZE(pinmux_banks)
+static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
+	[0] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
+		.irq = IRQ_GPIO0,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
+	},
+	[1] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
+		.irq = IRQ_GPIO1,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
+	},
+	[2] = {
+	       .hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
+		.irq = IRQ_GPIO2,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
+	},
+	[3] = {
+	       .hw_muxsel = {
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
+	       },
+	       .hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
+			NULL,
+	       },
+	       .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
+	       .functions = {0x0, 0x1, 0x2, 0x3},
+	       .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
+	},
+};
+
+static inline struct stmp3xxx_pinmux_bank *
+stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
+{
+	unsigned b, p;
+
+	b = STMP3XXX_PINID_TO_BANK(id);
+	p = STMP3XXX_PINID_TO_PINNUM(id);
+	BUG_ON(b >= NR_BANKS);
+	if (bank)
+		*bank = b;
+	if (pin)
+		*pin = p;
+	return &pinmux_banks[b];
+}
+
+/* Check if requested pin is owned by caller */
+static int stmp3xxx_check_pin(unsigned id, const char *label)
+{
+	unsigned pin;
+	struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
+
+	if (!test_bit(pin, &pm->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: Accessing free pin %x, caller %s\n",
+		       __func__, id, label);
+
+		return -EINVAL;
+	}
+
+	if (label && pm->pin_labels[pin] &&
+	    strcmp(label, pm->pin_labels[pin])) {
+		printk(KERN_WARNING
+		       "%s: Wrong pin owner %x, caller %s owner %s\n",
+		       __func__, id, label, pm->pin_labels[pin]);
+
+		return -EINVAL;
+	}
+	return 0;
+}
+
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+		const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
+		 bank, pin, strength);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+	val = pbank->strengths[strength];
+	if (val == 0xff) {
+		printk(KERN_WARNING
+		       "%s: strength is not supported for bank %d, caller %s",
+		       __func__, bank, label);
+		return;
+	}
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
+			val << shift, hwdrive);
+	stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
+	stmp3xxx_setl(val << shift, hwdrive);
+}
+
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			  const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
+		 bank, pin, voltage);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
+	if (voltage == PIN_1_8V)
+		stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+	else
+		stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+}
+
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwpull;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
+		 bank, pin, enable);
+
+	hwpull = pbank->hw_pull;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, 1 << pin, hwpull);
+	if (enable)
+		stmp3xxx_setl(1 << pin, hwpull);
+	else
+		stmp3xxx_clearl(1 << pin, hwpull);
+}
+
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+	int ret = 0;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
+		 bank, pin, fun);
+
+	if (test_bit(pin, &pbank->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
+		       __func__, bank, pin, label, pbank->pin_labels[pin]);
+		return -EBUSY;
+	}
+
+	set_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = label;
+
+	stmp3xxx_set_pin_type(id, fun);
+
+	return ret;
+}
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwmux;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+
+	hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+
+	val = pbank->functions[fun];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+	pr_debug("%s: writing 0x%x to 0x%p register\n",
+			__func__, val << shift, hwmux);
+	stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
+	stmp3xxx_setl(val << shift, hwmux);
+}
+
+void stmp3xxx_release_pin(unsigned id, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	clear_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = NULL;
+}
+
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+	int err = 0;
+
+	/* Allocate and configure pins */
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pr_debug("%s: #%d\n", __func__, p);
+		pin = &pin_group->pins[p];
+
+		err = stmp3xxx_request_pin(pin->id, pin->fun, label);
+		if (err)
+			goto out_err;
+
+		stmp3xxx_pin_strength(pin->id, pin->strength, label);
+		stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
+		stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
+	}
+
+	return 0;
+
+out_err:
+	/* Release allocated pins in case of error */
+	while (--p >= 0) {
+		pr_debug("%s: releasing #%d\n", __func__, p);
+		stmp3xxx_release_pin(pin_group->pins[p].id, label);
+	}
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_request_pin_group);
+
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pin = &pin_group->pins[p];
+		stmp3xxx_release_pin(pin->id, label);
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_release_pin_group);
+
+static int stmp3xxx_irq_to_gpio(int irq,
+	struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+
+	for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
+		if (pm->virq <= irq && irq < pm->virq + 32) {
+			*bank = pm;
+			*gpio = irq - pm->virq;
+			return 0;
+		}
+	return -ENOENT;
+}
+
+static int stmp3xxx_set_irqtype(unsigned irq, unsigned type)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+	int l, p;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		l = 0; p = 1; break;
+	case IRQ_TYPE_EDGE_FALLING:
+		l = 0; p = 0; break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		l = 1; p = 1; break;
+	case IRQ_TYPE_LEVEL_LOW:
+		l = 1; p = 0; break;
+	default:
+		pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
+				__func__, type);
+		return -ENXIO;
+	}
+
+	if (l)
+		stmp3xxx_setl(1 << gpio, pm->irqlevel);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqlevel);
+	if (p)
+		stmp3xxx_setl(1 << gpio, pm->irqpolarity);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
+	return 0;
+}
+
+static void stmp3xxx_pin_ack_irq(unsigned irq)
+{
+	u32 stat;
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stat = __raw_readl(pm->irqstat) & (1 << gpio);
+	stmp3xxx_clearl(stat, pm->irqstat);
+}
+
+static void stmp3xxx_pin_mask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_clearl(1 << gpio, pm->irqen);
+	stmp3xxx_clearl(1 << gpio, pm->pin2irq);
+}
+
+static void stmp3xxx_pin_unmask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_setl(1 << gpio, pm->irqen);
+	stmp3xxx_setl(1 << gpio, pm->pin2irq);
+}
+
+static inline
+struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
+{
+	return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
+}
+
+static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	return pm->virq + offset;
+}
+
+static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	unsigned v;
+
+	v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
+	return v ? 1 : 0;
+}
+
+static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	if (v)
+		stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
+	else
+		stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
+}
+
+static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
+	stmp3xxx_gpio_set(chip, offset, v);
+	return 0;
+}
+
+static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
+	return 0;
+}
+
+static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
+}
+
+static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	stmp3xxx_release_pin(chip->base + offset, "gpio");
+}
+
+static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
+{
+	struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq);
+	int gpio_irq = pm->virq;
+	u32 stat = __raw_readl(pm->irqstat);
+
+	while (stat) {
+		if (stat & 1)
+			irq_desc[gpio_irq].handle_irq(gpio_irq,
+				&irq_desc[gpio_irq]);
+		gpio_irq++;
+		stat >>= 1;
+	}
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.ack	= stmp3xxx_pin_ack_irq,
+	.mask	= stmp3xxx_pin_mask_irq,
+	.unmask	= stmp3xxx_pin_unmask_irq,
+	.set_type = stmp3xxx_set_irqtype,
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start)
+{
+	int b, r = 0;
+	struct stmp3xxx_pinmux_bank *pm;
+	int virq;
+
+	for (b = 0; b < 3; b++) {
+		/* only banks 0,1,2 are allowed to GPIO */
+		pm = pinmux_banks + b;
+		pm->chip.base = 32 * b;
+		pm->chip.ngpio = 32;
+		pm->chip.owner = THIS_MODULE;
+		pm->chip.can_sleep = 1;
+		pm->chip.exported = 1;
+		pm->chip.to_irq = stmp3xxx_gpio_to_irq;
+		pm->chip.direction_input = stmp3xxx_gpio_input;
+		pm->chip.direction_output = stmp3xxx_gpio_output;
+		pm->chip.get = stmp3xxx_gpio_get;
+		pm->chip.set = stmp3xxx_gpio_set;
+		pm->chip.request = stmp3xxx_gpio_request;
+		pm->chip.free = stmp3xxx_gpio_free;
+		pm->virq = virtual_irq_start + b * 32;
+
+		for (virq = pm->virq; virq < pm->virq; virq++) {
+			gpio_irq_chip.mask(virq);
+			set_irq_chip(virq, &gpio_irq_chip);
+			set_irq_handler(virq, handle_level_irq);
+			set_irq_flags(virq, IRQF_VALID);
+		}
+		r = gpiochip_add(&pm->chip);
+		if (r < 0)
+			break;
+		set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq);
+		set_irq_data(pm->irq, pm);
+	}
+	return r;
+}
+
+MODULE_AUTHOR("Vladislav Buzov");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
new file mode 100644
index 00000000000..063c7bc0e74
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -0,0 +1,189 @@
+/*
+ * System timer for Freescale STMP37XX/STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/time.h>
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-timrot.h>
+
+static irqreturn_t
+stmp3xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* timer 0 */
+	if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
+			BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+		c->event_handler(c);
+	}
+
+	/* timer 1 */
+	else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
+			& BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
+{
+	return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
+				& 0xFFFF0000) >> 16);
+}
+
+static int
+stmp3xxx_timrot_set_next_event(unsigned long delta,
+		struct clock_event_device *dev)
+{
+	/* reload the timer */
+	__raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	return 0;
+}
+
+static void
+stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ckevt_timrot = {
+	.name		= "timrot",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= stmp3xxx_timrot_set_next_event,
+	.set_mode	= stmp3xxx_timrot_set_mode,
+};
+
+static struct clocksource cksrc_stmp3xxx = {
+	.name           = "cksrc_stmp3xxx",
+	.rating         = 250,
+	.read           = stmp3xxx_clock_read,
+	.mask           = CLOCKSOURCE_MASK(16),
+	.shift          = 10,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction stmp3xxx_timer_irq = {
+	.name		= "stmp3xxx_timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= stmp3xxx_timer_interrupt,
+	.dev_id		= &ckevt_timrot,
+};
+
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init stmp3xxx_init_timer(void)
+{
+	cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
+				cksrc_stmp3xxx.shift);
+	ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+				ckevt_timrot.shift);
+	ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
+	ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
+	ckevt_timrot.cpumask = cpumask_of(0);
+
+	stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
+
+	/* clear two timers */
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	/* configure them */
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
+
+	clocksource_register(&cksrc_stmp3xxx);
+	clockevents_register_device(&ckevt_timrot);
+}
+
+#ifdef CONFIG_PM
+
+void stmp3xxx_suspend_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+}
+
+void stmp3xxx_resume_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+}
+
+#else
+
+#define stmp3xxx_suspend_timer	NULL
+#define	stmp3xxx_resume_timer	NULL
+
+#endif	/* CONFIG_PM */
+
+struct sys_timer stmp3xxx_timer = {
+	.init		= stmp3xxx_init_timer,
+	.suspend	= stmp3xxx_suspend_timer,
+	.resume		= stmp3xxx_resume_timer,
+};
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 945e0d237a1..fec64678a63 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -916,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-palmt650		MACH_PALMT650		PALMT650		909
+treo650			MACH_TREO650		TREO650			909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -1232,7 +1232,7 @@ ql202b			MACH_QL202B		QL202B			1226
 vpac270			MACH_VPAC270		VPAC270			1227
 rd129			MACH_RD129		RD129			1228
 htcwizard		MACH_HTCWIZARD		HTCWIZARD		1229
-xscale_treo680		MACH_XSCALE_TREO680	XSCALE_TREO680		1230
+treo680			MACH_TREO680		TREO680			1230
 tecon_tmezon		MACH_TECON_TMEZON	TECON_TMEZON		1231
 zylonite		MACH_ZYLONITE		ZYLONITE		1233
 gene1270		MACH_GENE1270		GENE1270		1234
@@ -1418,10 +1418,10 @@ looxc550		MACH_LOOXC550		LOOXC550		1417
 cnty_titan		MACH_CNTY_TITAN		CNTY_TITAN		1418
 app3xx			MACH_APP3XX		APP3XX			1419
 sideoatsgrama		MACH_SIDEOATSGRAMA	SIDEOATSGRAMA		1420
-palmtreo700p		MACH_PALMTREO700P	PALMTREO700P		1421
-palmtreo700w		MACH_PALMTREO700W	PALMTREO700W		1422
-palmtreo750		MACH_PALMTREO750	PALMTREO750		1423
-palmtreo755p		MACH_PALMTREO755P	PALMTREO755P		1424
+treo700p		MACH_TREO700P		TREO700P		1421
+treo700w		MACH_TREO700W		TREO700W		1422
+treo750			MACH_TREO750		TREO750			1423
+treo755p		MACH_TREO755P		TREO755P		1424
 ezreganut9200		MACH_EZREGANUT9200	EZREGANUT9200		1425
 sarge			MACH_SARGE		SARGE			1426
 a696			MACH_A696		A696			1427
@@ -1721,7 +1721,7 @@ sapphire		MACH_SAPPHIRE		SAPPHIRE		1729
 csb637xo		MACH_CSB637XO		CSB637XO		1730
 evisiong		MACH_EVISIONG		EVISIONG		1731
 stmp37xx		MACH_STMP37XX		STMP37XX		1732
-stmp378x		MACH_STMP38XX		STMP38XX		1733
+stmp378x		MACH_STMP378X		STMP378X		1733
 tnt			MACH_TNT		TNT			1734
 tbxt			MACH_TBXT		TBXT			1735
 playmate		MACH_PLAYMATE		PLAYMATE		1736
@@ -1817,7 +1817,7 @@ smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
 saar			MACH_SAAR		SAAR			1828
 deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
-at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+at91sam9m10g45ek	MACH_AT91SAM9M10G45EK	AT91SAM9M10G45EK	1830
 linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
 hit_b0			MACH_HIT_B0		HIT_B0			1832
 adx_rmu			MACH_ADX_RMU		ADX_RMU			1833
@@ -2132,3 +2132,116 @@ apollo			MACH_APOLLO		APOLLO			2141
 at91cap9stk		MACH_AT91CAP9STK	AT91CAP9STK		2142
 spc300			MACH_SPC300		SPC300			2143
 eko			MACH_EKO		EKO			2144
+ccw9m2443		MACH_CCW9M2443		CCW9M2443		2145
+ccw9m2443js		MACH_CCW9M2443JS	CCW9M2443JS		2146
+m2m_router_device	MACH_M2M_ROUTER_DEVICE	M2M_ROUTER_DEVICE	2147
+str9104nas		MACH_STAR9104NAS	STAR9104NAS		2148
+pca100			MACH_PCA100		PCA100			2149
+z3_dm365_mod_01		MACH_Z3_DM365_MOD_01	Z3_DM365_MOD_01		2150
+hipox			MACH_HIPOX		HIPOX			2151
+omap3_piteds		MACH_OMAP3_PITEDS	OMAP3_PITEDS		2152
+bm150r			MACH_BM150R		BM150R			2153
+tbone			MACH_TBONE		TBONE			2154
+merlin			MACH_MERLIN		MERLIN			2155
+falcon			MACH_FALCON		FALCON			2156
+davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
+s5p6440			MACH_S5P6440		S5P6440			2158
+at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
+omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
+lpc313x			MACH_LPC313X		LPC313X			2161
+magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
+magx_em30		MACH_MAGX_EM30		MAGX_EM30		2163
+magx_ve66		MACH_MAGX_VE66		MAGX_VE66		2164
+meesc			MACH_MEESC		MEESC			2165
+otc570			MACH_OTC570		OTC570			2166
+bcu2412			MACH_BCU2412		BCU2412			2167
+beacon			MACH_BEACON		BEACON			2168
+actia_tgw		MACH_ACTIA_TGW		ACTIA_TGW		2169
+e4430			MACH_E4430		E4430			2170
+ql300			MACH_QL300		QL300			2171
+btmavb101		MACH_BTMAVB101		BTMAVB101		2172
+btmawb101		MACH_BTMAWB101		BTMAWB101		2173
+sq201			MACH_SQ201		SQ201			2174
+quatro45xx		MACH_QUATRO45XX		QUATRO45XX		2175
+openpad			MACH_OPENPAD		OPENPAD			2176
+tx25			MACH_TX25		TX25			2177
+omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
+htcraphael_k		MACH_HTCRAPHAEL_K	HTCRAPHAEL_K		2179
+lal43			MACH_LAL43		LAL43			2181
+htcraphael_cdma500	MACH_HTCRAPHAEL_CDMA500	HTCRAPHAEL_CDMA500	2182
+anw6410			MACH_ANW6410		ANW6410			2183
+htcprophet		MACH_HTCPROPHET		HTCPROPHET		2185
+cfa_10022		MACH_CFA_10022		CFA_10022		2186
+imx27_visstrim_m10	MACH_IMX27_VISSTRIM_M10	IMX27_VISSTRIM_M10	2187
+px2imx27		MACH_PX2IMX27		PX2IMX27		2188
+stm3210e_eval		MACH_STM3210E_EVAL	STM3210E_EVAL		2189
+dvs10			MACH_DVS10		DVS10			2190
+portuxg20		MACH_PORTUXG20		PORTUXG20		2191
+arm_spv			MACH_ARM_SPV		ARM_SPV			2192
+smdkc110		MACH_SMDKC110		SMDKC110		2193
+cabespresso		MACH_CABESPRESSO	CABESPRESSO		2194
+hmc800			MACH_HMC800		HMC800			2195
+sholes			MACH_SHOLES		SHOLES			2196
+btmxc31			MACH_BTMXC31		BTMXC31			2197
+dt501			MACH_DT501		DT501			2198
+ktx			MACH_KTX		KTX			2199
+omap3517evm		MACH_OMAP3517EVM	OMAP3517EVM		2200
+netspace_v2		MACH_NETSPACE_V2	NETSPACE_V2		2201
+netspace_max_v2		MACH_NETSPACE_MAX_V2	NETSPACE_MAX_V2		2202
+d2net_v2		MACH_D2NET_V2		D2NET_V2		2203
+net2big_v2		MACH_NET2BIG_V2		NET2BIG_V2		2204
+net4big_v2		MACH_NET4BIG_V2		NET4BIG_V2		2205
+net5big_v2		MACH_NET5BIG_V2		NET5BIG_V2		2206
+endb2443		MACH_ENDB2443		ENDB2443		2207
+inetspace_v2		MACH_INETSPACE_V2	INETSPACE_V2		2208
+tros			MACH_TROS		TROS			2209
+pelco_homer		MACH_PELCO_HOMER	PELCO_HOMER		2210
+ofsp8			MACH_OFSP8		OFSP8			2211
+at91sam9g45ekes		MACH_AT91SAM9G45EKES	AT91SAM9G45EKES		2212
+guf_cupid		MACH_GUF_CUPID		GUF_CUPID		2213
+eab1r			MACH_EAB1R		EAB1R			2214
+desirec			MACH_DESIREC		DESIREC			2215
+cordoba			MACH_CORDOBA		CORDOBA			2216
+irvine			MACH_IRVINE		IRVINE			2217
+sff772			MACH_SFF772		SFF772			2218
+pelco_milano		MACH_PELCO_MILANO	PELCO_MILANO		2219
+pc7302			MACH_PC7302		PC7302			2220
+bip6000			MACH_BIP6000		BIP6000			2221
+silvermoon		MACH_SILVERMOON		SILVERMOON		2222
+vc0830			MACH_VC0830		VC0830			2223
+dt430			MACH_DT430		DT430			2224
+ji42pf			MACH_JI42PF		JI42PF			2225
+gnet_ksm		MACH_GNET_KSM		GNET_KSM		2226
+gnet_sgm		MACH_GNET_SGM		GNET_SGM		2227
+gnet_sgr		MACH_GNET_SGR		GNET_SGR		2228
+omap3_icetekevm		MACH_OMAP3_ICETEKEVM	OMAP3_ICETEKEVM		2229
+pnp			MACH_PNP		PNP			2230
+ctera_2bay_k		MACH_CTERA_2BAY_K	CTERA_2BAY_K		2231
+ctera_2bay_u		MACH_CTERA_2BAY_U	CTERA_2BAY_U		2232
+sas_c			MACH_SAS_C		SAS_C			2233
+vma2315			MACH_VMA2315		VMA2315			2234
+vcs			MACH_VCS		VCS			2235
+spear600		MACH_SPEAR600		SPEAR600		2236
+spear300		MACH_SPEAR300		SPEAR300		2237
+spear1300		MACH_SPEAR1300		SPEAR1300		2238
+lilly1131		MACH_LILLY1131		LILLY1131		2239
+arvoo_ax301		MACH_ARVOO_AX301	ARVOO_AX301		2240
+mapphone		MACH_MAPPHONE		MAPPHONE		2241
+legend			MACH_LEGEND		LEGEND			2242
+salsa			MACH_SALSA		SALSA			2243
+lounge			MACH_LOUNGE		LOUNGE			2244
+vision			MACH_VISION		VISION			2245
+vmb20			MACH_VMB20		VMB20			2246
+hy2410			MACH_HY2410		HY2410			2247
+hy9315			MACH_HY9315		HY9315			2248
+bullwinkle		MACH_BULLWINKLE		BULLWINKLE		2249
+arm_ultimator2		MACH_ARM_ULTIMATOR2	ARM_ULTIMATOR2		2250
+vs_v210			MACH_VS_V210		VS_V210			2252
+vs_v212			MACH_VS_V212		VS_V212			2253
+hmt			MACH_HMT		HMT			2254
+suen3			MACH_SUEN3		SUEN3			2255
+vesper			MACH_VESPER		VESPER			2256
+str9			MACH_STR9		STR9			2257
+omap3_wl_ff		MACH_OMAP3_WL_FF	OMAP3_WL_FF		2258
+simcom			MACH_SIMCOM		SIMCOM			2259
+mcwebio			MACH_MCWEBIO		MCWEBIO			2260
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 83c4e384b16..1aeae38725d 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -100,6 +100,7 @@ ENTRY(vfp_support_entry)
 	beq	no_old_VFP_process
 	VFPFSTMIA r4, r5		@ save the working registers
 	VFPFMRX	r5, FPSCR		@ current status
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to save?
 	beq	1f
 	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
@@ -107,6 +108,7 @@ ENTRY(vfp_support_entry)
 	beq	1f
 	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
 1:
+#endif
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
@@ -119,6 +121,7 @@ no_old_VFP_process:
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
 	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to restore?
 	beq	1f
 	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
@@ -126,6 +129,7 @@ no_old_VFP_process:
 	beq	1f
 	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
 1:
+#endif
 	VFPFMXR	FPSCR, r5		@ restore status
 
 check_for_exception:
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 01599c4ef72..2d7423af119 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	}
 
 	if (fpexc & FPEXC_EX) {
+#ifndef CONFIG_CPU_FEROCEON
 		/*
 		 * Asynchronous exception. The instruction is read from FPINST
 		 * and the interrupted instruction has to be restarted.
 		 */
 		trigger = fmrx(FPINST);
 		regs->ARM_pc -= 4;
+#endif
 	} else if (!(fpexc & FPEXC_DEX)) {
 		/*
 		 * Illegal combination of bits. It can be caused by an
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
index b3f99477bbe..be27a0218ab 100644
--- a/arch/avr32/boards/atngw100/Kconfig
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -2,8 +2,15 @@
 
 if BOARD_ATNGW100
 
+choice
+	prompt "Select an NGW100 add-on board to support"
+	default BOARD_ATNGW100_ADDON_NONE
+
+config BOARD_ATNGW100_ADDON_NONE
+	bool "None"
+
 config BOARD_ATNGW100_EVKLCD10X
-	bool "Add support for EVKLCD10X addon board"
+	bool "EVKLCD10X addon board"
 	help
 	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
 	  addon board for the NGW100. By enabling this the LCD controller and
@@ -14,7 +21,19 @@ config BOARD_ATNGW100_EVKLCD10X
 	  The MCI pins can be reenabled by editing the "add device function" but
 	  this may break the setup for other displays that use these pins.
 
-	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
+config BOARD_ATNGW100_MRMT
+	bool "Mediama RMT1/2 add-on board"
+	help
+	  This enables support for the Mediama RMT1 or RMT2 board.
+	  RMT provides LCD support, AC97 codec and other
+	  optional peripherals to the Atmel NGW100.
+
+	  This choice disables the detect pin and the write-protect pin for the
+	  MCI platform device, since it conflicts with the LCD platform device.
+	  The MCI pins can be reenabled by editing the "add device function" but
+	  this may break the setup for other displays that use these pins.
+
+endchoice
 
 choice
 	prompt "LCD panel resolution on EVKLCD10X"
@@ -32,4 +51,8 @@ config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
 
 endchoice
 
+if BOARD_ATNGW100_MRMT
+source	"arch/avr32/boards/atngw100/Kconfig_mrmt"
+endif
+
 endif	# BOARD_ATNGW100
diff --git a/arch/avr32/boards/atngw100/Kconfig_mrmt b/arch/avr32/boards/atngw100/Kconfig_mrmt
new file mode 100644
index 00000000000..9a199a207f3
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig_mrmt
@@ -0,0 +1,80 @@
+# RMT for NGW100 customization
+
+choice
+	prompt "RMT Version"
+	help
+	  Select the RMTx board version.
+
+config BOARD_MRMT_REV1
+	bool "RMT1"
+config BOARD_MRMT_REV2
+	bool "RMT2"
+
+endchoice
+
+config BOARD_MRMT_AC97
+	bool "Enable AC97 CODEC"
+	help
+	  Enable the UCB1400 AC97 CODEC driver.
+
+choice
+	prompt "Touchscreen Driver"
+	default BOARD_MRMT_ADS7846_TS
+
+config BOARD_MRMT_UCB1400_TS
+	bool "Use UCB1400 Touchscreen"
+
+config BOARD_MRMT_ADS7846_TS
+	bool "Use ADS7846 Touchscreen"
+
+endchoice
+
+choice
+	prompt "RMTx LCD Selection"
+	default BOARD_MRMT_LCD_DISABLE
+
+config BOARD_MRMT_LCD_DISABLE
+	bool "LCD Disabled"
+
+config BOARD_MRMT_LCD_LQ043T3DX0X
+	bool "Sharp LQ043T3DX0x or compatible"
+	help
+	  If using RMT2, be sure to load the resistor pack selectors accordingly
+
+if BOARD_MRMT_REV2
+config BOARD_MRMT_LCD_KWH043GM08
+	bool "Formike KWH043GM08 or compatible"
+	help
+	  Be sure to load the RMT2 resistor pack selectors accordingly
+endif
+
+endchoice
+
+if !BOARD_MRMT_LCD_DISABLE
+config BOARD_MRMT_BL_PWM
+	bool "Use PWM control for LCD Backlight"
+	help
+		Use PWM driver for controlling LCD Backlight.
+		Otherwise, LCD Backlight is always on.
+endif
+
+config BOARD_MRMT_RTC_I2C
+	bool "Use External RTC on I2C Bus"
+	help
+		RMT1 has an optional RTC device on the I2C bus.
+		It is a SII S35390A.  Be sure to select the
+		matching RTC driver.
+
+choice
+	prompt "Wireless Module on ttyS2"
+	default BOARD_MRMT_WIRELESS_ZB
+
+config BOARD_MRMT_WIRELESS_ZB
+	bool "Use ZigBee/802.15.4 Module"
+
+config BOARD_MRMT_WIRELESS_BT
+	bool "Use Bluetooth (HCI) Module"
+
+config BOARD_MRMT_WIRELESS_NONE
+	bool "Not Installed"
+endchoice
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
index 6376f5322e4..f4ebe42a825 100644
--- a/arch/avr32/boards/atngw100/Makefile
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -1,2 +1,3 @@
 obj-y					+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o
+obj-$(CONFIG_BOARD_ATNGW100_MRMT)	+= mrmt.o
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
new file mode 100644
index 00000000000..bf78e516a85
--- /dev/null
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -0,0 +1,373 @@
+/*
+ * Board-specific setup code for Remote Media Terminal 1 (RMT1)
+ * add-on board for the ATNGW100 Network Gateway
+ *
+ * Copyright (C) 2008 Mediama Technologies
+ * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/atmel_serial.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <video/atmel_lcdc.h>
+#include <sound/atmel-ac97c.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+/* Define board-specifoic GPIO assignments */
+#define PIN_LCD_BL	GPIO_PIN_PA(28)
+#define PWM_CH_BL	0	/* Must match with GPIO pin definition */
+#define PIN_LCD_DISP	GPIO_PIN_PA(31)
+#define	PIN_AC97_RST_N	GPIO_PIN_PA(30)
+#define PB_EXTINT_BASE	25
+#define TS_IRQ		0
+#define PIN_TS_EXTINT	GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)
+#define PIN_PB_LEFT	GPIO_PIN_PB(11)
+#define PIN_PB_RIGHT	GPIO_PIN_PB(12)
+#define PIN_PWR_SW_N	GPIO_PIN_PB(14)
+#define PIN_PWR_ON	GPIO_PIN_PB(13)
+#define PIN_ZB_RST_N	GPIO_PIN_PA(21)
+#define PIN_BT_RST	GPIO_PIN_PA(22)
+#define PIN_LED_SYS	GPIO_PIN_PA(16)
+#define PIN_LED_A	GPIO_PIN_PA(19)
+#define PIN_LED_B	GPIO_PIN_PE(19)
+
+#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X
+/* Sharp LQ043T3DX0x (or compatible) panel */
+static struct fb_videomode __initdata lcd_fb_modes[] = {
+	{
+		.name		= "480x272 @ 59.94Hz",
+		.refresh	= 59.94,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 2,		.right_margin	= 2,
+		.upper_margin	= 3,		.lower_margin	= 9,
+		.hsync_len	= 41,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
+	.manufacturer		= "SHA",
+	.monitor		= "LQ043T3DX02",
+	.modedb			= lcd_fb_modes,
+	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
+	.hfmin			= 14915,
+	.hfmax			= 17638,
+	.vfmin			= 53,
+	.vfmax			= 61,
+	.dclkmax		= 9260000,
+};
+
+static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+	.default_bpp		= 24,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_INVCLK_NORMAL
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
+	.default_monspecs	= &lcd_fb_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08
+/* Sharp KWH043GM08-Fxx (or compatible) panel */
+static struct fb_videomode __initdata lcd_fb_modes[] = {
+	{
+		.name		= "480x272 @ 59.94Hz",
+		.refresh	= 59.94,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 2,		.right_margin	= 2,
+		.upper_margin	= 3,		.lower_margin	= 9,
+		.hsync_len	= 41,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
+	.manufacturer		= "FOR",
+	.monitor		= "KWH043GM08",
+	.modedb			= lcd_fb_modes,
+	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
+	.hfmin			= 14915,
+	.hfmax			= 17638,
+	.vfmin			= 53,
+	.vfmax			= 61,
+	.dclkmax		= 9260000,
+};
+
+static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+	.default_bpp		= 24,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_INVCLK_INVERTED
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
+	.default_monspecs	= &lcd_fb_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_AC97
+static struct ac97c_platform_data __initdata ac97c0_data = {
+	.reset_pin		= PIN_AC97_RST_N,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
+/* NOTE: IRQ assignment relies on kernel module parameter */
+static struct platform_device rmt_ts_device = {
+	.name	= "ucb1400_ts",
+	.id	= -1,
+	}
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_BL_PWM
+/* PWM LEDs: LCD Backlight, etc */
+static struct gpio_led rmt_pwm_led[] = {
+	/* here the "gpio" is actually a PWM channel */
+	{ .name = "backlight",	.gpio = PWM_CH_BL, },
+};
+
+static struct gpio_led_platform_data rmt_pwm_led_data = {
+	.num_leds	= ARRAY_SIZE(rmt_pwm_led),
+	.leds		= rmt_pwm_led,
+};
+
+static struct platform_device rmt_pwm_led_dev = {
+	.name		= "leds-atmel-pwm",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rmt_pwm_led_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
+static int ads7846_pendown_state(void)
+{
+	return !gpio_get_value( PIN_TS_EXTINT );	/* PENIRQ.*/
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model				= 7846,
+	.keep_vref_on			= 0,	/* Use external VREF pin */
+	.vref_delay_usecs		= 0,
+	.vref_mv			= 3300,	/* VREF = 3.3V */
+	.settle_delay_usecs		= 800,
+	.penirq_recheck_delay_usecs	= 800,
+	.x_plate_ohms			= 750,
+	.y_plate_ohms			= 300,
+	.pressure_max			= 4096,
+	.debounce_max			= 1,
+	.debounce_rep			= 0,
+	.debounce_tol			= (~0),
+	.get_pendown_state		= ads7846_pendown_state,
+	.filter				= NULL,
+	.filter_init			= NULL,
+};
+
+static struct spi_board_info spi01_board_info[] __initdata = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 31250*26,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.platform_data	= &ads_info,
+		.irq		= AT32_EXTINT(TS_IRQ),
+	},
+};
+#endif
+
+/* GPIO Keys: left, right, power, etc */
+static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {
+	[0] = {
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= PIN_PWR_SW_N,
+		.active_low	= 1,
+		.desc		= "power button",
+	},
+	[1] = {
+		.type		= EV_KEY,
+		.code		= KEY_LEFT,
+		.gpio		= PIN_PB_LEFT,
+		.active_low	= 1,
+		.desc		= "left button",
+	},
+	[2] = {
+		.type		= EV_KEY,
+		.code		= KEY_RIGHT,
+		.gpio		= PIN_PB_RIGHT,
+		.active_low	= 1,
+		.desc		= "right button",
+	},
+};
+
+static const struct gpio_keys_platform_data rmt_gpio_keys_data = {
+	.nbuttons =	ARRAY_SIZE(rmt_gpio_keys_buttons),
+	.buttons =	(void *) rmt_gpio_keys_buttons,
+};
+
+static struct platform_device rmt_gpio_keys = {
+	.name =		"gpio-keys",
+	.id =		-1,
+	.dev = {
+		.platform_data = (void *) &rmt_gpio_keys_data,
+	}
+};
+
+#ifdef CONFIG_BOARD_MRMT_RTC_I2C
+static struct i2c_board_info __initdata mrmt1_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+	.irq		= 0,
+};
+#endif
+
+static void mrmt_power_off(void)
+{
+	/* PWR_ON=0 will force power off */
+	gpio_set_value( PIN_PWR_ON, 0 );
+}
+
+static int __init mrmt1_init(void)
+{
+	gpio_set_value( PIN_PWR_ON, 1 );	/* Ensure PWR_ON is enabled */
+
+	pm_power_off = mrmt_power_off;
+
+	/* Setup USARTS (other than console) */
+	at32_map_usart(2, 1, 0);	/* USART 2: /dev/ttyS1, RMT1:DB9M */
+	at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);
+			/* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */
+	at32_add_device_usart(1);
+	at32_add_device_usart(2);
+
+	/* Select GPIO Key pins */
+	at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);
+	at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);
+	at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);
+	platform_device_register(&rmt_gpio_keys);
+
+#ifdef CONFIG_BOARD_MRMT_RTC_I2C
+	i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);
+#endif
+
+#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE
+	/* User "alternate" LCDC inferface on Port E & D */
+	/* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */
+	at32_add_device_lcdc(0, &rmt_lcdc_data,
+		fbmem_start, fbmem_size,
+		(ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_AC97
+	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
+	/* Select the Touchscreen interrupt pin mode */
+	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
+			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
+	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
+	/* Select the Touchscreen interrupt pin mode */
+	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
+			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	platform_device_register(&rmt_ts_device);
+#endif
+
+	at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_LCD_DISP, "LCD_DISP" );
+	gpio_direction_output( PIN_LCD_DISP, 0 );	/* LCD DISP */
+#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE
+	/* Keep Backlight and DISP off */
+	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_LCD_BL, "LCD_BL" );
+	gpio_direction_output( PIN_LCD_BL, 0 );		/* Backlight */
+#else
+	gpio_set_value( PIN_LCD_DISP, 1 );	/* DISP asserted first */
+#ifdef CONFIG_BOARD_MRMT_BL_PWM
+	/* Use PWM for Backlight controls */
+	at32_add_device_pwm(1 << PWM_CH_BL);
+	platform_device_register(&rmt_pwm_led_dev);
+#else
+	/* Backlight always on */
+	udelay( 1 );
+	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_LCD_BL, "LCD_BL" );
+	gpio_direction_output( PIN_LCD_BL, 1 );
+#endif
+#endif
+
+	/* Make sure BT and Zigbee modules in reset */
+	at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_BT_RST, "BT_RST" );
+	gpio_direction_output( PIN_BT_RST, 1 );
+	/* BT Module in Reset */
+
+	at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );
+	gpio_direction_output( PIN_ZB_RST_N, 0 );
+	/* XBee Module in Reset */
+
+#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB
+	udelay( 1000 );
+	/* Unreset the XBee Module */
+	gpio_set_value( PIN_ZB_RST_N, 1 );
+#endif
+#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT
+	udelay( 1000 );
+	/* Unreset the BT Module */
+	gpio_set_value( PIN_BT_RST, 0 );
+#endif
+
+	return 0;
+}
+arch_initcall(mrmt1_init);
+
+static int __init mrmt1_early_init(void)
+{
+	/* To maintain power-on signal in case boot loader did not already */
+	at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );
+	gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );
+	gpio_direction_output( PIN_PWR_ON, 1 );
+
+	return 0;
+}
+core_initcall(mrmt1_early_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 5b022aad4bd..bc299fbbeb4 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
 		.bus_width	= 4,
+#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1)
+		.detect_pin     = GPIO_PIN_NONE,
+		.wp_pin         = GPIO_PIN_NONE,
+#else
 		.detect_pin	= GPIO_PIN_PC(25),
 		.wp_pin		= GPIO_PIN_PE(0),
+#endif
 	},
 };
 
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index 20b300cf105..623b077594f 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -94,9 +94,10 @@ static struct spi_board_info __initdata spi0_board_info[] = {
 
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= GPIO_PIN_PE(19),
-		.wp_pin		= GPIO_PIN_PE(20),
+		.bus_width		= 4,
+		.detect_pin		= GPIO_PIN_PE(19),
+		.wp_pin			= GPIO_PIN_PE(20),
+		.detect_is_active_high	= true,
 	},
 };
 
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c1b2175b4fe..523d8e183be 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -43,16 +43,16 @@ unsigned long at32_board_osc_rates[3] = {
 /* Initialized by bootloader-specific startup code. */
 struct tag *bootloader_tags __initdata;
 
-static struct fb_videomode __initdata tx14d14_modes[] = {
+static struct fb_videomode __initdata pt0434827_modes[] = {
 	{
-		.name		= "640x480 @ 60",
-		.refresh	= 60,
-		.xres		= 640,		.yres		= 480,
-		.pixclock	= KHZ2PICOS(11666),
+		.name		= "480x272 @ 72",
+		.refresh	= 72,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(10000),
 
-		.left_margin	= 80,		.right_margin	= 1,
-		.upper_margin	= 13,		.lower_margin	= 2,
-		.hsync_len	= 64,		.vsync_len	= 1,
+		.left_margin	= 1,		.right_margin	= 1,
+		.upper_margin	= 12,		.lower_margin	= 1,
+		.hsync_len	= 42,		.vsync_len	= 1,
 
 		.sync		= 0,
 		.vmode		= FB_VMODE_NONINTERLACED,
@@ -60,14 +60,14 @@ static struct fb_videomode __initdata tx14d14_modes[] = {
 };
 
 static struct fb_monspecs __initdata mimc200_default_monspecs = {
-	.manufacturer		= "HIT",
-	.monitor		= "TX14D14VM1BAB",
-	.modedb			= tx14d14_modes,
-	.modedb_len		= ARRAY_SIZE(tx14d14_modes),
+	.manufacturer		= "PT",
+	.monitor		= "PT0434827-A401",
+	.modedb			= pt0434827_modes,
+	.modedb_len		= ARRAY_SIZE(pt0434827_modes),
 	.hfmin			= 14820,
 	.hfmax			= 22230,
 	.vfmin			= 60,
-	.vfmax			= 73.3,
+	.vfmax			= 85,
 	.dclkmax		= 25200000,
 };
 
@@ -228,7 +228,8 @@ static int __init mimc200_init(void)
 	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
 
 	at32_add_device_lcdc(0, &mimc200_lcdc_data,
-			     fbmem_start, fbmem_size, 1);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_CONTROL | ATMEL_LCDC_ALT_24B_DATA);
 
 	return 0;
 }
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
new file mode 100644
index 00000000000..17b030777d3
--- /dev/null
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -0,0 +1,1363 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Wed Jun  3 00:24:53 2009
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+# CONFIG_BOARD_HAMMERHEAD is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MERISC is not set
+# CONFIG_BOARD_MIMC200 is not set
+# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
+CONFIG_BOARD_ATNGW100_MRMT=y
+CONFIG_BOARD_MRMT_REV1=y
+# CONFIG_BOARD_MRMT_REV2 is not set
+CONFIG_BOARD_MRMT_AC97=y
+# CONFIG_BOARD_MRMT_UCB1400_TS is not set
+CONFIG_BOARD_MRMT_ADS7846_TS=y
+# CONFIG_BOARD_MRMT_LCD_DISABLE is not set
+CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X=y
+# CONFIG_BOARD_MRMT_LCD_KWH043GM08 is not set
+CONFIG_BOARD_MRMT_BL_PWM=y
+CONFIG_BOARD_MRMT_RTC_I2C=y
+CONFIG_BOARD_MRMT_WIRELESS_ZB=y
+# CONFIG_BOARD_MRMT_WIRELESS_BT is not set
+# CONFIG_BOARD_MRMT_WIRELESS_NONE is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
+# CONFIG_BACKLIGHT_ATMEL_PWM is not set
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_ABDAC is not set
+CONFIG_SND_ATMEL_AC97C=m
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=m
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=y
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=m
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h
index 31881510774..b131c27ddf5 100644
--- a/arch/avr32/include/asm/atomic.h
+++ b/arch/avr32/include/asm/atomic.h
@@ -196,6 +196,6 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /*  __ASM_AVR32_ATOMIC_H */
diff --git a/arch/avr32/include/asm/bitsperlong.h b/arch/avr32/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/avr32/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
index 218b0a6bfd1..a36f9fcb8fc 100644
--- a/arch/avr32/include/asm/hw_irq.h
+++ b/arch/avr32/include/asm/hw_irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_AVR32_HW_IRQ_H
 #define __ASM_AVR32_HW_IRQ_H
 
-static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+static inline void hw_resend_irq(struct irq_chip *h, unsigned int i)
 {
 	/* Nothing to do */
 }
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
index 648f91e7187..9a92b15f6a6 100644
--- a/arch/avr32/include/asm/mman.h
+++ b/arch/avr32/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_AVR32_MMAN_H__
 #define __ASM_AVR32_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h
index caffefeeba1..8790dfc10d5 100644
--- a/arch/avr32/include/asm/signal.h
+++ b/arch/avr32/include/asm/signal.h
@@ -112,7 +112,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h
index 0152aba3515..dd7e9da2548 100644
--- a/arch/avr32/include/asm/termios.h
+++ b/arch/avr32/include/asm/termios.h
@@ -55,7 +55,7 @@ struct termio {
 */
 #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 1167fe9cf6c..98f94d041d9 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -32,8 +32,6 @@ void module_free(struct module *mod, void *module_region)
 	mod->arch.syminfo = NULL;
 
 	vfree(module_region);
-	/* FIXME: if module_region == mod->init_region, trim exception
-	 * table entries. */
 }
 
 static inline int check_rela(Elf32_Rela *rela, struct module *module,
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index d547c8df157..6e3d491184e 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -75,8 +75,17 @@ void _exception(long signr, struct pt_regs *regs, int code,
 {
 	siginfo_t info;
 
-	if (!user_mode(regs))
+	if (!user_mode(regs)) {
+		const struct exception_table_entry *fixup;
+
+		/* Are we prepared to handle this kernel fault? */
+		fixup = search_exception_tables(regs->pc);
+		if (fixup) {
+			regs->pc = fixup->fixup;
+			return;
+		}
 		die("Unhandled exception in kernel mode", regs, signr);
+	}
 
 	memset(&info, 0, sizeof(info));
 	info.si_signo = signr;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 0b816428189..ddedb471f33 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -29,7 +29,7 @@ extern struct platform_device *atmel_default_console_device;
 /* Flags for selecting USART extra pins */
 #define	ATMEL_USART_RTS		0x01
 #define	ATMEL_USART_CTS		0x02
-#define	ATMEL_USART_CLK		0x03
+#define	ATMEL_USART_CLK		0x04
 
 struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 3640cdc38aa..a60cfe75791 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -223,6 +223,7 @@ endchoice
 
 config SMP
 	depends on BF561
+	select GENERIC_TIME
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -241,12 +242,6 @@ config IRQ_PER_CPU
 	depends on SMP
 	default y
 
-config TICK_SOURCE_SYSTMR0
-	bool
-	select BFIN_GPTIMERS
-	depends on SMP
-	default y
-
 config BF_REV_MIN
 	int
 	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
@@ -263,8 +258,8 @@ config BF_REV_MAX
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
-	default BF_REV_0_2 if (BF534 || BF536 || BF537)
+	default BF_REV_0_0 if (BF51x || BF52x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
 	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
@@ -607,7 +602,6 @@ source kernel/Kconfig.hz
 
 config GENERIC_TIME
 	bool "Generic time"
-	depends on !SMP
 	default y
 
 config GENERIC_CLOCKEVENTS
@@ -615,12 +609,26 @@ config GENERIC_CLOCKEVENTS
 	depends on GENERIC_TIME
 	default y
 
+choice
+	prompt "Kernel Tick Source"
+	depends on GENERIC_CLOCKEVENTS
+	default TICKSOURCE_CORETMR
+
+config TICKSOURCE_GPTMR0
+	bool "Gptimer0 (SCLK domain)"
+	select BFIN_GPTIMERS
+	depends on !IPIPE
+
+config TICKSOURCE_CORETMR
+	bool "Core timer (CCLK domain)"
+
+endchoice
+
 config CYCLES_CLOCKSOURCE
-	bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Use 'CYCLES' as a clocksource"
 	depends on GENERIC_CLOCKEVENTS
 	depends on !BFIN_SCRATCH_REG_CYCLES
-	default n
+	depends on !SMP
 	help
 	  If you say Y here, you will enable support for using the 'cycles'
 	  registers as a clock source.  Doing so means you will be unable to
@@ -628,6 +636,11 @@ config CYCLES_CLOCKSOURCE
 	  still be able to read it (such as for performance monitoring), but
 	  writing the registers will most likely crash the kernel.
 
+config GPTMR0_CLOCKSOURCE
+	bool "Use GPTimer0 as a clocksource (higher rating)"
+	depends on GENERIC_CLOCKEVENTS
+	depends on !TICKSOURCE_GPTMR0
+
 source kernel/time/Kconfig
 
 comment "Misc"
@@ -808,7 +821,7 @@ config APP_STACK_L1
 config EXCEPTION_L1_SCRATCH
 	bool "Locate exception stack in L1 Scratch Memory"
 	default n
-	depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+	depends on !APP_STACK_L1
 	help
 	  Whenever an exception occurs, use the L1 Scratch memory for
 	  stack storage.  You cannot place the stacks of FLAT binaries
@@ -872,7 +885,7 @@ config BFIN_GPTIMERS
 	  are unsure, say N.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called gptimers.ko.
+	  will be called gptimers.
 
 choice
 	prompt "Uncached DMA region"
@@ -901,7 +914,7 @@ config BFIN_ICACHE_LOCK
 	bool "Enable Instruction Cache Locking"
 
 choice
-	prompt "Policy"
+	prompt "External memory cache policy"
 	depends on BFIN_DCACHE
 	default BFIN_WB if !SMP
 	default BFIN_WT if SMP
@@ -942,12 +955,22 @@ config BFIN_WT
 
 endchoice
 
-config BFIN_L2_CACHEABLE
-	bool "Cache L2 SRAM"
-	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
-	default n
-	help
-	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
+choice
+	prompt "L2 SRAM cache policy"
+	depends on (BF54x || BF561)
+	default BFIN_L2_WT
+config BFIN_L2_WB
+	bool "Write back"
+	depends on !SMP
+
+config BFIN_L2_WT
+	bool "Write through"
+	depends on !SMP
+
+config BFIN_L2_NOT_CACHED
+	bool "Not cached"
+
+endchoice
 
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
@@ -1011,21 +1034,34 @@ endmenu
 
 menu "EBIU_AMBCTL Control"
 config BANK_0
-	hex "Bank 0"
+	hex "Bank 0 (AMBCTL0.L)"
 	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 0 settings.
 
 config BANK_1
-	hex "Bank 1"
+	hex "Bank 1 (AMBCTL0.H)"
 	default 0x7BB0
 	default 0x5558 if BF54x
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
+	  used to control the Asynchronous Memory Bank 1 settings.
 
 config BANK_2
-	hex "Bank 2"
+	hex "Bank 2 (AMBCTL1.L)"
 	default 0x7BB0
+	help
+	  These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 2 settings.
 
 config BANK_3
-	hex "Bank 3"
+	hex "Bank 3 (AMBCTL1.H)"
 	default 0x99B3
+	help
+	  These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
+	  used to control the Asynchronous Memory Bank 3 settings.
+
 endmenu
 
 config EBIU_MBSCTLVAL
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 79e7e63ab70..1fc4981d486 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -54,6 +54,19 @@ config DEBUG_HWERR
 	  hardware error interrupts and need to know where they are coming
 	  from.
 
+config EXACT_HWERR
+	bool "Try to make Hardware errors exact"
+	depends on DEBUG_HWERR
+	help
+	  By default, the Blackfin hardware errors are not exact - the error
+          be reported multiple cycles after the error happens. This delay
+	  can cause the wrong application, or even the kernel to receive a
+	  signal to be killed. If you are getting HW errors in your system,
+	  try turning this on to ensure they are at least comming from the
+	  proper thread.
+
+	  On production systems, it is safe (and a small optimization) to say N.
+
 config DEBUG_DOUBLEFAULT
 	bool "Debug Double Faults"
 	default n
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index c121d6e6e2b..baec1337f28 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -259,7 +259,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -404,7 +407,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -688,14 +691,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -802,7 +805,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -831,6 +857,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -962,7 +989,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -988,8 +1016,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1012,8 +1043,8 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1048,9 +1079,9 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1065,7 +1096,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1074,7 +1105,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1087,7 +1118,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1102,7 +1133,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1111,8 +1142,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1132,7 +1161,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1148,16 +1176,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1269,7 +1301,6 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 3e562b2775d..c06262e41f7 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -144,8 +144,8 @@ CONFIG_BF526=y
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-CONFIG_BF_REV_0_1=y
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
@@ -264,7 +264,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -409,7 +412,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -491,7 +494,7 @@ CONFIG_MTD_PARTITIONS=y
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
+CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -504,9 +507,9 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -518,9 +521,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -529,7 +533,8 @@ CONFIG_MTD_ROM=m
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -597,9 +602,42 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -644,9 +682,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -715,14 +752,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -832,11 +869,35 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -920,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1008,8 +1070,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1037,10 +1099,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1058,7 +1120,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1107,33 +1169,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1206,7 +1245,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -1226,14 +1266,19 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1256,16 +1301,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1277,6 +1312,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1313,7 +1358,7 @@ CONFIG_SMB_FS=m
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1328,7 +1373,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1337,7 +1382,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1350,7 +1395,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1365,7 +1410,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1374,8 +1419,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1395,7 +1438,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1411,16 +1453,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1534,7 +1580,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 911b5dba1db..e9175c608aa 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -145,8 +145,8 @@ CONFIG_BF527=y
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
-CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -264,7 +264,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -318,7 +321,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=m
+CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -409,7 +412,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -639,9 +642,42 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -687,9 +723,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -758,14 +793,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -875,7 +910,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -909,6 +967,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1091,8 +1150,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1120,10 +1179,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1141,7 +1200,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1190,33 +1249,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1289,7 +1325,8 @@ CONFIG_RTC_DRV_BFIN=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -1309,14 +1346,20 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1339,16 +1382,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1360,6 +1393,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1396,7 +1439,7 @@ CONFIG_SMB_FS=m
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1411,7 +1454,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
+CONFIG_NLS_CODEPAGE_936=m
 # CONFIG_NLS_CODEPAGE_950 is not set
 # CONFIG_NLS_CODEPAGE_932 is not set
 # CONFIG_NLS_CODEPAGE_949 is not set
@@ -1420,7 +1463,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1433,7 +1476,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
@@ -1448,7 +1491,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1457,8 +1500,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1478,7 +1519,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1494,16 +1534,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1611,13 +1655,12 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 4c41e03efe0..5aa63bafdd6 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -225,7 +225,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -382,7 +385,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -613,9 +616,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -667,13 +669,13 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -729,7 +731,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -904,16 +929,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -925,6 +940,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1013,7 +1038,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1022,8 +1047,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1043,7 +1066,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1059,16 +1081,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1181,7 +1207,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9c482cd1b34..fed25329e13 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -225,7 +225,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -382,7 +385,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -618,9 +621,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -674,14 +676,14 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -781,7 +783,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1068,16 +1093,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1089,6 +1104,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1177,7 +1202,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1186,8 +1211,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1207,7 +1230,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1223,16 +1245,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1345,7 +1371,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 591f6edda4f..f9ac20d5579 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -232,7 +232,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -390,7 +393,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -548,9 +551,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -649,9 +650,8 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -708,14 +708,14 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -823,7 +823,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1123,16 +1146,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1144,6 +1157,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1232,7 +1255,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1241,8 +1264,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1262,7 +1283,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1278,16 +1298,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1400,7 +1424,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 1a8e8c3adf9..ee98e227b88 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -243,7 +243,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -389,7 +392,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -546,9 +549,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -691,11 +692,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_TOUCHSCREEN_AD7879=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -720,14 +721,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -833,7 +834,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1056,16 +1080,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1077,6 +1091,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1165,7 +1189,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1174,8 +1198,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1195,7 +1217,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 
 #
 # Tracers
@@ -1211,16 +1232,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1333,7 +1358,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 2cd1c2b218d..deeabef8ab8 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -196,6 +196,7 @@ CONFIG_BFIN548_EZKIT=y
 # BF548 Specific Configuration
 #
 # CONFIG_DEB_DMA_URGENT is not set
+# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
 
 #
 # Interrupt Priority Assignment
@@ -298,7 +299,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -367,7 +371,9 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_CACHEABLE is not set
+# CONFIG_BFIN_L2_WB is not set
+CONFIG_BFIN_L2_WT=y
+# CONFIG_BFIN_L2_NOT_CACHED is not set
 # CONFIG_MPU is not set
 
 #
@@ -447,7 +453,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -616,9 +622,7 @@ CONFIG_MTD_RAM=y
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -696,7 +700,7 @@ CONFIG_SCSI_DMA=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
@@ -718,9 +722,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -752,9 +754,8 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -821,11 +822,11 @@ CONFIG_KEYBOARD_BFIN=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -858,14 +859,14 @@ CONFIG_INPUT_MISC=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=m
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
@@ -977,7 +978,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1011,6 +1035,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1193,8 +1218,8 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1222,10 +1247,10 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1243,7 +1268,7 @@ CONFIG_MUSB_DMA_POLL=y
 #
 # see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1292,33 +1317,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1414,13 +1416,8 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1476,16 +1473,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1497,6 +1484,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1539,63 +1536,47 @@ CONFIG_CIFS=y
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
@@ -1611,7 +1592,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1620,8 +1601,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1641,7 +1620,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1657,16 +1635,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1780,7 +1762,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 4a6ea8e31df..dcfbe2e2931 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
+# Thu May 21 05:50:01 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,10 +43,11 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -53,16 +55,15 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -71,7 +72,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -148,9 +148,9 @@ CONFIG_BF_REV_MAX=5
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
+# CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
+CONFIG_BF_REV_0_5=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
@@ -179,7 +179,6 @@ CONFIG_BFIN561_EZKIT=y
 # Core B Support
 #
 CONFIG_BF561_COREB=y
-CONFIG_BF561_COREB_RESET=y
 
 #
 # Interrupt Priority Assignment
@@ -264,7 +263,10 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -334,7 +336,9 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_CACHEABLE is not set
+# CONFIG_BFIN_L2_WB is not set
+CONFIG_BFIN_L2_WT=y
+# CONFIG_BFIN_L2_NOT_CACHED is not set
 # CONFIG_MPU is not set
 
 #
@@ -415,7 +419,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -570,9 +574,7 @@ CONFIG_MTD_ROM=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -649,9 +651,8 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -703,13 +704,13 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
@@ -765,7 +766,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -897,16 +921,6 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -918,6 +932,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1006,7 +1030,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
@@ -1015,8 +1039,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1036,7 +1058,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1052,16 +1073,20 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
@@ -1174,7 +1199,6 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index ef1a2c84ace..174c578b8ec 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -381,7 +381,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index e2fc588e433..e17875e8abe 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -46,7 +46,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -411,7 +411,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -783,7 +783,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 65a8bbb8d64..fafd95e84b2 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -347,7 +347,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -547,9 +547,9 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -641,6 +641,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9b7e9d78114..e73aa5af58b 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.28.10
+# Wed Jun  3 06:27:41 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -8,48 +9,44 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -58,37 +55,36 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -102,9 +98,11 @@ CONFIG_IOSCHED_CFQ=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -113,6 +111,10 @@ CONFIG_PREEMPT_NONE=y
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -125,22 +127,31 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 CONFIG_BF537=y
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=2
+CONFIG_BF_REV_MAX=3
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -150,7 +161,6 @@ CONFIG_IRQ_SPORT0_TX=9
 CONFIG_IRQ_SPORT1_RX=9
 CONFIG_IRQ_SPORT1_TX=9
 CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
 CONFIG_IRQ_UART0_RX=10
 CONFIG_IRQ_UART0_TX=10
 CONFIG_IRQ_UART1_RX=10
@@ -169,11 +179,12 @@ CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
 CONFIG_BFIN537_BLUETECHNIX_CM=y
+# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -196,6 +207,7 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -215,13 +227,20 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -248,6 +267,12 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -256,12 +281,14 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -275,7 +302,6 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 CONFIG_BFIN_WB=y
 # CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
 #
@@ -304,36 +330,28 @@ CONFIG_BANK_3=0xFFC2
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -346,6 +364,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -358,7 +377,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -367,6 +386,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -374,8 +394,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -384,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -393,10 +412,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -404,18 +419,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -427,10 +438,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -438,6 +445,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -450,12 +458,15 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -466,6 +477,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -473,7 +488,8 @@ CONFIG_MTD_RAM=y
 #
 # Mapping drivers for chip access
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -498,33 +514,23 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -532,22 +538,17 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -561,46 +562,44 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -618,15 +617,17 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -655,138 +656,119 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# TPM devices
+# Memory mapped GPIO expanders:
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # Enable Host or Gadget support to see Inventra options
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -796,20 +778,18 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -835,7 +815,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -848,60 +827,53 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -919,13 +891,95 @@ CONFIG_ACCESS_CHECK=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -933,11 +987,12 @@ CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 569523c1c03..80211303f6b 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -49,7 +49,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -355,7 +355,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -556,9 +556,9 @@ CONFIG_SMC91X=y
 # CONFIG_BFIN_MAC is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -652,6 +652,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 035b635e599..dd815f0d151 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -125,9 +125,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF548=y
 # CONFIG_BF549 is not set
 # CONFIG_BF561 is not set
-CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -422,7 +422,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -811,6 +811,10 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 7015e42ccce..16c198bd40c 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -49,7 +49,7 @@ CONFIG_FAIR_USER_SCHED=y
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -389,7 +389,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -569,9 +569,9 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -646,6 +646,10 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
 #
 # SPI support
 #
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index dfc8e1ddd77..6b4c1a98238 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -48,7 +48,7 @@ CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -347,7 +347,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -594,8 +594,8 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_AX88180 is not set
 
 #
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 95a5f91aeba..1ec9ae2e964 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -49,7 +49,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -355,7 +355,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -672,9 +672,9 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
-CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_1000 is not set
 # CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 78e24080e7f..09701f907e9 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.7
+# Linux kernel version: 2.6.28.10
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -40,26 +40,26 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -68,7 +68,6 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -229,7 +228,10 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -374,7 +376,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -598,9 +600,8 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_AX88180 is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -640,11 +641,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -676,14 +677,14 @@ CONFIG_INPUT_UINPUT=y
 # Character devices
 #
 # CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
-CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
@@ -796,6 +797,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -867,6 +869,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_REGULATOR is not set
@@ -1111,6 +1114,7 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_YAFFS_FS=y
 CONFIG_YAFFS_YAFFS1=y
 # CONFIG_YAFFS_9BYTE_TAGS is not set
@@ -1121,7 +1125,6 @@ CONFIG_YAFFS_AUTO_YAFFS2=y
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1213,7 +1216,6 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 
 #
 # Tracers
@@ -1343,7 +1345,6 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 2bc0779d22e..ec84a53daae 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -52,7 +52,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -373,7 +373,7 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index e65b3a49214..6e2796240fd 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -537,7 +537,30 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore
deleted file mode 100644
index 7858564a446..00000000000
--- a/arch/blackfin/include/asm/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-+mach
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index 94b2a9b1945..7bbf44e4ddf 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -208,6 +208,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 #define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
 #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif				/* __ARCH_BLACKFIN_ATOMIC __ */
diff --git a/arch/blackfin/include/asm/bitsperlong.h b/arch/blackfin/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/blackfin/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 1b040f5b4fe..94697f0f6f4 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -30,7 +30,8 @@
 #ifndef _BLACKFIN_CACHEFLUSH_H
 #define _BLACKFIN_CACHEFLUSH_H
 
-extern void blackfin_icache_dcache_flush_range(unsigned long start_address, unsigned long end_address);
+#include <asm/blackfin.h>	/* for SSYNC() */
+
 extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
@@ -54,32 +55,28 @@ extern void blackfin_invalidate_entire_dcache(void);
 
 static inline void flush_icache_range(unsigned start, unsigned end)
 {
-#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE)
-
-# if defined(CONFIG_BFIN_WT)
-	blackfin_icache_flush_range((start), (end));
-	flush_icache_range_others(start, end);
-# else
-	blackfin_icache_dcache_flush_range((start), (end));
-# endif
-
-#else
+#if defined(CONFIG_BFIN_WB)
+	blackfin_dcache_flush_range(start, end);
+#endif
 
-# if defined(CONFIG_BFIN_ICACHE)
-	blackfin_icache_flush_range((start), (end));
+	/* Make sure all write buffers in the data side of the core
+	 * are flushed before trying to invalidate the icache.  This
+	 * needs to be after the data flush and before the icache
+	 * flush so that the SSYNC does the right thing in preventing
+	 * the instruction prefetcher from hitting things in cached
+	 * memory at the wrong time -- it runs much further ahead than
+	 * the pipeline.
+	 */
+	SSYNC();
+#if defined(CONFIG_BFIN_ICACHE)
+	blackfin_icache_flush_range(start, end);
 	flush_icache_range_others(start, end);
-# endif
-# if defined(CONFIG_BFIN_DCACHE)
-	blackfin_dcache_flush_range((start), (end));
-# endif
-
 #endif
 }
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do { memcpy(dst, src, len);						\
      flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len));	\
-     flush_icache_range_others((unsigned long) (dst), (unsigned long) (dst) + (len));\
 } while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
@@ -111,6 +108,11 @@ static inline int bfin_addr_dcachable(unsigned long addr)
 		addr >= _ramend && addr < physical_mem_end)
 		return 1;
 
+#ifndef CONFIG_BFIN_L2_NOT_CACHED
+	if (addr >= L2_START && addr < L2_START + L2_LENGTH)
+		return 1;
+#endif
+
 	return 0;
 }
 
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index ad566ff9ad1..a75a6a9f094 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -53,29 +53,32 @@
 #define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
 #endif
 
+#define SDRAM_DNON_CHBL  (CPLB_COMMON)
+#define SDRAM_EBIU       (CPLB_COMMON)
+#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
 #define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
 
 #ifdef CONFIG_SMP
-#define L2_ATTR           (INITIAL_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY         (CPLB_COMMON | CPLB_LOCK)
-#define L2_DMEMORY         (CPLB_COMMON | CPLB_LOCK)
+#define L2_ATTR          (INITIAL_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (CPLB_COMMON)
+#define L2_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
 
 #else
-#ifdef CONFIG_BFIN_L2_CACHEABLE
-#define L2_IMEMORY        (SDRAM_IGENERIC)
-#define L2_DMEMORY        (SDRAM_DGENERIC)
-#else
-#define L2_IMEMORY        (CPLB_COMMON)
-#define L2_DMEMORY        (CPLB_COMMON)
-#endif /* CONFIG_BFIN_L2_CACHEABLE */
-
-#define L2_ATTR           (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+#define L2_ATTR          (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
+#define L2_IMEMORY       (SDRAM_IGENERIC)
+
+# if defined(CONFIG_BFIN_L2_WB)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_COMMON)
+# elif defined(CONFIG_BFIN_L2_WT)
+# define L2_DMEMORY      (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
+# define L2_DMEMORY      (CPLB_COMMON)
+# else
+# define L2_DMEMORY      (0)
+# endif
 #endif /* CONFIG_SMP */
 
-#define SDRAM_DNON_CHBL  (CPLB_COMMON)
-#define SDRAM_EBIU       (CPLB_COMMON)
-#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-
 #define SIZE_1K 0x00000400      /* 1K */
 #define SIZE_4K 0x00001000      /* 4K */
 #define SIZE_1M 0x00100000      /* 1M */
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index e4f7b8043f0..c9a59622e23 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -206,10 +206,16 @@ static inline unsigned long get_dma_curr_addr(unsigned int channel)
 
 static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize)
 {
+	/* Make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below.
+	 */
+	SSYNC();
+
+	dma_ch[channel].regs->next_desc_ptr = sg;
 	dma_ch[channel].regs->cfg =
 		(dma_ch[channel].regs->cfg & ~(0xf << 8)) |
 		((ndsize & 0xf) << 8);
-	dma_ch[channel].regs->next_desc_ptr = sg;
 }
 
 static inline int dma_channel_active(unsigned int channel)
@@ -253,5 +259,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
 void *dma_memcpy(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
+void early_dma_memcpy(void *dest, const void *src, size_t count);
+void early_dma_memcpy_done(void);
 
 #endif
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index cdbfcfc30f6..230e1605d3f 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -55,50 +55,50 @@ do {											\
 #define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
 #define ELF_EXEC_PAGESIZE	4096
 
-#define	R_unused0	0	/* relocation type 0 is not defined */
-#define R_pcrel5m2	1	/*LSETUP part a */
-#define R_unused1	2	/* relocation type 2 is not defined */
-#define R_pcrel10	3	/* type 3, if cc jump <target>  */
-#define R_pcrel12_jump	4	/* type 4, jump <target> */
-#define R_rimm16	5	/* type 0x5, rN = <target> */
-#define R_luimm16	6	/* # 0x6, preg.l=<target> Load imm 16 to lower half */
-#define R_huimm16  	7	/* # 0x7, preg.h=<target> Load imm 16 to upper half */
-#define R_pcrel12_jump_s 8	/* # 0x8 jump.s <target> */
-#define R_pcrel24_jump_x 9	/* # 0x9 jump.x <target> */
-#define R_pcrel24       10	/* # 0xa call <target> , not expandable */
-#define R_unusedb       11	/* # 0xb not generated */
-#define R_unusedc       12	/* # 0xc  not used */
-#define R_pcrel24_jump_l 13	/*0xd jump.l <target> */
-#define R_pcrel24_call_x 14	/* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
-#define R_var_eq_symb    15	/* 0xf, linker should treat it same as 0x12 */
-#define R_byte_data      16	/* 0x10, .byte var = symbol */
-#define R_byte2_data     17	/* 0x11, .byte2 var = symbol */
-#define R_byte4_data     18	/* 0x12, .byte4 var = symbol and .var var=symbol */
-#define R_pcrel11        19	/* 0x13, lsetup part b */
-#define R_unused14      20	/* 0x14, undefined */
-#define R_unused15       21	/* not generated by VDSP 3.5 */
+#define R_BFIN_UNUSED0         0   /* relocation type 0 is not defined */
+#define R_BFIN_PCREL5M2        1   /* LSETUP part a */
+#define R_BFIN_UNUSED1         2   /* relocation type 2 is not defined */
+#define R_BFIN_PCREL10         3   /* type 3, if cc jump <target> */
+#define R_BFIN_PCREL12_JUMP    4   /* type 4, jump <target> */
+#define R_BFIN_RIMM16          5   /* type 0x5, rN = <target> */
+#define R_BFIN_LUIMM16         6   /* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_BFIN_HUIMM16         7   /* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_BFIN_PCREL12_JUMP_S  8   /* # 0x8 jump.s <target> */
+#define R_BFIN_PCREL24_JUMP_X  9   /* # 0x9 jump.x <target> */
+#define R_BFIN_PCREL24         10  /* # 0xa call <target> , not expandable */
+#define R_BFIN_UNUSEDB         11  /* # 0xb not generated */
+#define R_BFIN_UNUSEDC         12  /* # 0xc  not used */
+#define R_BFIN_PCREL24_JUMP_L  13  /* 0xd jump.l <target> */
+#define R_BFIN_PCREL24_CALL_X  14  /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_BFIN_VAR_EQ_SYMB     15  /* 0xf, linker should treat it same as 0x12 */
+#define R_BFIN_BYTE_DATA       16  /* 0x10, .byte var = symbol */
+#define R_BFIN_BYTE2_DATA      17  /* 0x11, .byte2 var = symbol */
+#define R_BFIN_BYTE4_DATA      18  /* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_BFIN_PCREL11         19  /* 0x13, lsetup part b */
+#define R_BFIN_UNUSED14        20  /* 0x14, undefined */
+#define R_BFIN_UNUSED15        21  /* not generated by VDSP 3.5 */
 
 /* arithmetic relocations */
-#define R_push		 0xE0
-#define R_const		 0xE1
-#define R_add		 0xE2
-#define R_sub		 0xE3
-#define R_mult		 0xE4
-#define R_div		 0xE5
-#define R_mod		 0xE6
-#define R_lshift	 0xE7
-#define R_rshift	 0xE8
-#define R_and		 0xE9
-#define R_or		 0xEA
-#define R_xor		 0xEB
-#define R_land		 0xEC
-#define R_lor		 0xED
-#define R_len		 0xEE
-#define R_neg		 0xEF
-#define R_comp		 0xF0
-#define R_page		 0xF1
-#define R_hwpage	 0xF2
-#define R_addr		 0xF3
+#define R_BFIN_PUSH            0xE0
+#define R_BFIN_CONST           0xE1
+#define R_BFIN_ADD             0xE2
+#define R_BFIN_SUB             0xE3
+#define R_BFIN_MULT            0xE4
+#define R_BFIN_DIV             0xE5
+#define R_BFIN_MOD             0xE6
+#define R_BFIN_LSHIFT          0xE7
+#define R_BFIN_RSHIFT          0xE8
+#define R_BFIN_AND             0xE9
+#define R_BFIN_OR              0xEA
+#define R_BFIN_XOR             0xEB
+#define R_BFIN_LAND            0xEC
+#define R_BFIN_LOR             0xED
+#define R_BFIN_LEN             0xEE
+#define R_BFIN_NEG             0xEF
+#define R_BFIN_COMP            0xF0
+#define R_BFIN_PAGE            0xF1
+#define R_BFIN_HWPAGE          0xF2
+#define R_BFIN_ADDR            0xF3
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
    use of this is to invoke "./ld.so someprog" to test out a new version of
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index b30a2968e27..ec58efc130e 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -35,21 +35,39 @@
 #else
 # define LOAD_IPIPE_IPEND
 #endif
+
+#ifndef CONFIG_EXACT_HWERR
+/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
+ * otherwise it is a waste of cycles.
+ */
+# ifndef CONFIG_DEBUG_KERNEL
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# else /* CONFIG_DEBUG_KERNEL */
 #define INTERRUPT_ENTRY(N)						\
     [--sp] = SYSCFG;							\
-									\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
     R0 = (N);								\
     LOAD_IPIPE_IPEND							\
     jump __common_int_entry;
+# endif /* CONFIG_DEBUG_KERNEL */
 
 /* For timer interrupts, we need to save IPEND, since the user_mode
-	   macro accesses it to determine where to account time.  */
+ *macro accesses it to determine where to account time.
+ */
 #define TIMER_INTERRUPT_ENTRY(N)					\
     [--sp] = SYSCFG;							\
-									\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
@@ -58,6 +76,74 @@
     r1 = [p0];								\
     R0 = (N);								\
     jump __common_int_entry;
+#else /* CONFIG_EXACT_HWERR is defined */
+
+/* if we want hardware error to be exact, we need to do a SSYNC (which forces
+ * read/writes to complete to the memory controllers), and check to see that
+ * caused a pending HW error condition. If so, we assume it was caused by user
+ * space, by setting the same interrupt that we are in (so it goes off again)
+ * and context restore, and a RTI (without servicing anything). This should
+ * cause the pending HWERR to fire, and when that is done, this interrupt will
+ * be re-serviced properly.
+ * As you can see by the code - we actually need to do two SSYNCS - one to
+ * make sure the read/writes complete, and another to make sure the hardware
+ * error is recognized by the core.
+ */
+#define INTERRUPT_ENTRY(N)						\
+    SSYNC;								\
+    SSYNC;								\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    SSYNC;								\
+    SSYNC;								\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+#endif	/* CONFIG_EXACT_HWERR */
 
 /* This one pushes RETI without using CLI.  Interrupts are enabled.  */
 #define SAVE_CONTEXT_SYSCALL	save_context_syscall
diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h
index e70074e05f4..733a178d782 100644
--- a/arch/blackfin/include/asm/flat.h
+++ b/arch/blackfin/include/asm/flat.h
@@ -10,7 +10,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp)	/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index b0f847ae4bf..89f08decb8e 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -30,6 +30,7 @@
 # else
 #  define MAX_BLACKFIN_GPTIMERS 11
 #  define TIMER8_GROUP_REG      TIMER_ENABLE1
+#  define TIMER_GROUP2          1
 # endif
 # define TIMER0_GROUP_REG       TIMER_ENABLE0
 #endif
@@ -40,10 +41,12 @@
 # define MAX_BLACKFIN_GPTIMERS 12
 # define TIMER0_GROUP_REG      TMRS8_ENABLE
 # define TIMER8_GROUP_REG      TMRS4_ENABLE
+# define TIMER_GROUP2          1
 #endif
 /*
  * All others: 3 timers:
  */
+#define TIMER_GROUP1           0
 #if !defined(MAX_BLACKFIN_GPTIMERS)
 # define MAX_BLACKFIN_GPTIMERS 3
 # define TIMER0_GROUP_REG      TIMER_ENABLE
@@ -109,8 +112,8 @@
 #define TIMER_ERR_PROG_PER  0x8000
 #define TIMER_ERR_PROG_PW   0xC000
 #define TIMER_EMU_RUN       0x0200
-#define	TIMER_TOGGLE_HI     0x0100
-#define	TIMER_CLK_SEL       0x0080
+#define TIMER_TOGGLE_HI     0x0100
+#define TIMER_CLK_SEL       0x0080
 #define TIMER_OUT_DIS       0x0040
 #define TIMER_TIN_SEL       0x0020
 #define TIMER_IRQ_ENA       0x0010
@@ -169,23 +172,25 @@
 
 /* The actual gptimer API */
 
-void     set_gptimer_pwidth    (int timer_id, uint32_t width);
-uint32_t get_gptimer_pwidth    (int timer_id);
-void     set_gptimer_period    (int timer_id, uint32_t period);
-uint32_t get_gptimer_period    (int timer_id);
-uint32_t get_gptimer_count     (int timer_id);
-uint16_t get_gptimer_intr      (int timer_id);
-void     clear_gptimer_intr    (int timer_id);
-uint16_t get_gptimer_over      (int timer_id);
-void     clear_gptimer_over    (int timer_id);
-void     set_gptimer_config    (int timer_id, uint16_t config);
-uint16_t get_gptimer_config    (int timer_id);
-void     set_gptimer_pulse_hi  (int timer_id);
+void     set_gptimer_pwidth(int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(int timer_id);
+void     set_gptimer_period(int timer_id, uint32_t period);
+uint32_t get_gptimer_period(int timer_id);
+uint32_t get_gptimer_count(int timer_id);
+int      get_gptimer_intr(int timer_id);
+void     clear_gptimer_intr(int timer_id);
+int      get_gptimer_over(int timer_id);
+void     clear_gptimer_over(int timer_id);
+void     set_gptimer_config(int timer_id, uint16_t config);
+uint16_t get_gptimer_config(int timer_id);
+int      get_gptimer_run(int timer_id);
+void     set_gptimer_pulse_hi(int timer_id);
 void     clear_gptimer_pulse_hi(int timer_id);
-void     enable_gptimers       (uint16_t mask);
-void     disable_gptimers      (uint16_t mask);
-uint16_t get_enabled_gptimers  (void);
-uint32_t get_gptimer_status    (int group);
-void     set_gptimer_status    (int group, uint32_t value);
+void     enable_gptimers(uint16_t mask);
+void     disable_gptimers(uint16_t mask);
+void     disable_gptimers_sync(uint16_t mask);
+uint16_t get_enabled_gptimers(void);
+uint32_t get_gptimer_status(int group);
+void     set_gptimer_status(int group, uint32_t value);
 
 #endif
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 63b2d8c7857..3022b5c96b3 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -80,19 +80,22 @@ static inline unsigned int readl(const volatile void __iomem *addr)
 #define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
 #define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
 
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
+/* Convert "I/O port addresses" to actual addresses.  i.e. ugly casts. */
+#define __io(port) ((void *)(unsigned long)(port))
+
+#define inb(port)    readb(__io(port))
+#define inw(port)    readw(__io(port))
+#define inl(port)    readl(__io(port))
+#define outb(x,port) writeb(x,__io(port))
+#define outw(x,port) writew(x,__io(port))
+#define outl(x,port) writel(x,__io(port))
+
+#define inb_p(port)    inb(__io(port))
+#define inw_p(port)    inw(__io(port))
+#define inl_p(port)    inl(__io(port))
+#define outb_p(x,port) outb(x,__io(port))
+#define outw_p(x,port) outw(x,__io(port))
+#define outl_p(x,port) outl(x,__io(port))
 
 #define ioread8_rep(a,d,c)	readsb(a,d,c)
 #define ioread16_rep(a,d,c)	readsw(a,d,c)
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 343b56361ec..51d0bf5e289 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,10 +35,10 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.9-00"
+#define IPIPE_ARCH_STRING     "1.9-01"
 #define IPIPE_MAJOR_NUMBER    1
 #define IPIPE_MINOR_NUMBER    9
-#define IPIPE_PATCH_NUMBER    0
+#define IPIPE_PATCH_NUMBER    1
 
 #ifdef CONFIG_SMP
 #error "I-pipe/blackfin: SMP not implemented"
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 344f6a8c1f2..3ea2016a1d4 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -81,7 +81,7 @@ extern unsigned long memory_end;
 #define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
 				((void *)(kaddr) < (void *)memory_end))
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif				/* __ASSEMBLY__ */
 
diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index a67142740df..b42555c1431 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -64,8 +64,6 @@ struct blackfin_pda {			/* Per-processor Data Area */
 
 extern struct blackfin_pda cpu_pda[];
 
-void reserve_pda(void);
-
 #endif	/* __ASSEMBLY__ */
 
 #endif /* _ASM_BLACKFIN_PDA_H */
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index 0eece23b41c..3040415523b 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -131,8 +131,8 @@ unsigned long get_wchan(struct task_struct *p);
 /* Get the Silicon Revision of the chip */
 static inline uint32_t __pure bfin_revid(void)
 {
-	/* stored in the upper 4 bits */
-	uint32_t revid = bfin_read_CHIPID() >> 28;
+	/* Always use CHIPID, to work around ANOMALY_05000234 */
+	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
 #ifdef CONFIG_BF52x
 	/* ANOMALY_05000357
diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h
index 87951d25145..2eea9079445 100644
--- a/arch/blackfin/include/asm/signal.h
+++ b/arch/blackfin/include/asm/signal.h
@@ -104,7 +104,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
index ddc43ce3853..589e937ed1e 100644
--- a/arch/blackfin/include/asm/time.h
+++ b/arch/blackfin/include/asm/time.h
@@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off;
 extern unsigned int __bfin_cycles_mod;
 #endif
 
+extern void __init setup_core_timer(void);
 #endif
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 3248033531e..8894e9ffbb5 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -59,12 +59,8 @@ static inline int is_in_rom(unsigned long addr)
 #ifndef CONFIG_ACCESS_CHECK
 static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
 #else
-#ifdef CONFIG_ACCESS_OK_L1
-extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text));
-#else
 extern int _access_ok(unsigned long addr, unsigned long size);
 #endif
-#endif
 
 /*
  * The exception table consists of pairs of addresses: the first is the
@@ -83,9 +79,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -233,16 +226,29 @@ strncpy_from_user(char *dst, const char *src, long count)
 }
 
 /*
- * Return the size of a string (including the ending 0)
+ * Get the size of a string in user space.
+ *   src: The string to measure
+ *     n: The maximum valid length
  *
- * Return 0 on exception, a value greater than N if too long
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than n.
  */
-static inline long strnlen_user(const char *src, long n)
+static inline long __must_check strnlen_user(const char *src, long n)
 {
-	return (strlen(src) + 1);
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strnlen(src, n) + 1;
 }
 
-#define strlen_user(str) strnlen_user(str, 32767)
+static inline long __must_check strlen_user(const char *src)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return strlen(src) + 1;
+}
 
 /*
  * Zero Userspace
@@ -251,6 +257,8 @@ static inline long strnlen_user(const char *src, long n)
 static inline unsigned long __must_check
 __clear_user(void *to, unsigned long n)
 {
+	if (!access_ok(VERIFY_WRITE, to, n))
+		return n;
 	memset(to, 0, n);
 	return 0;
 }
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 1e57b636e0b..cf5066d3efd 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -378,8 +378,10 @@
 #define __NR_dup3		363
 #define __NR_pipe2		364
 #define __NR_inotify_init1	365
+#define __NR_preadv		366
+#define __NR_pwritev		367
 
-#define __NR_syscall		366
+#define __NR_syscall		368
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/.gitignore b/arch/blackfin/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/blackfin/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 8531693fb48..763ed84ba45 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -20,6 +20,11 @@
 #include <asm/dma.h>
 #include <asm/uaccess.h>
 
+/*
+ * To make sure we work around 05000119 - we always check DMA_DONE bit,
+ * never the DMA_RUN bit
+ */
+
 struct dma_channel dma_ch[MAX_DMA_CHANNELS];
 EXPORT_SYMBOL(dma_ch);
 
@@ -232,6 +237,87 @@ void blackfin_dma_resume(void)
 void __init blackfin_dma_early_init(void)
 {
 	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+}
+
+void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
+{
+	unsigned long dst = (unsigned long)pdst;
+	unsigned long src = (unsigned long)psrc;
+	struct dma_register *dst_ch, *src_ch;
+
+	/* We assume that everything is 4 byte aligned, so include
+	 * a basic sanity check
+	 */
+	BUG_ON(dst % 4);
+	BUG_ON(src % 4);
+	BUG_ON(size % 4);
+
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
+	src_ch = 0;
+	/* Find an avalible memDMA channel */
+	while (1) {
+		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		}
+
+		if (!bfin_read16(&src_ch->cfg)) {
+			break;
+		} else {
+			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
+				bfin_write16(&src_ch->cfg, 0);
+		}
+
+	}
+
+	/* Destination */
+	bfin_write32(&dst_ch->start_addr, dst);
+	bfin_write16(&dst_ch->x_count, size >> 2);
+	bfin_write16(&dst_ch->x_modify, 1 << 2);
+	bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Source */
+	bfin_write32(&src_ch->start_addr, src);
+	bfin_write16(&src_ch->x_count, size >> 2);
+	bfin_write16(&src_ch->x_modify, 1 << 2);
+	bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR);
+
+	/* Enable */
+	bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32);
+	bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32);
+
+	/* Since we are atomic now, don't use the workaround ssync */
+	__builtin_bfin_ssync();
+}
+
+void __init early_dma_memcpy_done(void)
+{
+	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
+	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
+		continue;
+
+	bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	/*
+	 * Now that DMA is done, we would normally flush cache, but
+	 * i/d cache isn't running this early, so we don't bother,
+	 * and just clear out the DMA channel for next time
+	 */
+	bfin_write_MDMA_S0_CONFIG(0);
+	bfin_write_MDMA_S1_CONFIG(0);
+	bfin_write_MDMA_D0_CONFIG(0);
+	bfin_write_MDMA_D1_CONFIG(0);
+
+	__builtin_bfin_ssync();
 }
 
 /**
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index a0678da4053..beffa00a93c 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -313,15 +313,6 @@ inline void portmux_setup(unsigned short per)
 # define portmux_setup(...)  do { } while (0)
 #endif
 
-static int __init bfin_gpio_init(void)
-{
-	printk(KERN_INFO "Blackfin GPIO Controller\n");
-
-	return 0;
-}
-arch_initcall(bfin_gpio_init);
-
-
 #ifndef CONFIG_BF54x
 /***********************************************************
 *
@@ -1021,15 +1012,6 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		if (system_state == SYSTEM_BOOTING)
-			dump_stack();
-		printk(KERN_ERR
-		       "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n",
-		       gpio);
-		local_irq_restore_hw(flags);
-		return -EBUSY;
-	}
 	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 01f917d58b5..53e893ff708 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -16,7 +16,6 @@ EXPORT_SYMBOL(bfin_return_from_exception);
 
 /* All the Blackfin cache functions: mach-common/cache.S */
 EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
-EXPORT_SYMBOL(blackfin_icache_dcache_flush_range);
 EXPORT_SYMBOL(blackfin_icache_flush_range);
 EXPORT_SYMBOL(blackfin_dcache_flush_range);
 EXPORT_SYMBOL(blackfin_dflush_page);
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
index c6ff947f9d3..d5a86c3017f 100644
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	}
 
 	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= DMEM_CNTR;
+
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 3e329a6ce04..c006a44527b 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -64,7 +64,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
 
 	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
+	icplb_tbl[cpu][i_i++].data = CPLB_VALID | i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index c6ff947f9d3..d5a86c3017f 100644
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -55,7 +55,14 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	}
 
 	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= DMEM_CNTR;
+
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index c8ad051742e..3302719173c 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -178,25 +178,15 @@ int __init setup_early_printk(char *buf)
 
 asmlinkage void __init init_early_exception_vectors(void)
 {
+	u32 evt;
 	SSYNC();
 
 	/* cannot program in software:
 	 * evt0 - emulation (jtag)
 	 * evt1 - reset
 	 */
-	bfin_write_EVT2(early_trap);
-	bfin_write_EVT3(early_trap);
-	bfin_write_EVT5(early_trap);
-	bfin_write_EVT6(early_trap);
-	bfin_write_EVT7(early_trap);
-	bfin_write_EVT8(early_trap);
-	bfin_write_EVT9(early_trap);
-	bfin_write_EVT10(early_trap);
-	bfin_write_EVT11(early_trap);
-	bfin_write_EVT12(early_trap);
-	bfin_write_EVT13(early_trap);
-	bfin_write_EVT14(early_trap);
-	bfin_write_EVT15(early_trap);
+	for (evt = EVT2; evt <= EVT15; evt += 4)
+		bfin_write32(evt, early_trap);
 	CSYNC();
 
 	/* Set all the return from interrupt, exception, NMI to a known place
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index 3a3e9615b00..7281a91d26b 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -189,10 +189,10 @@ void set_gptimer_status(int group, uint32_t value)
 }
 EXPORT_SYMBOL(set_gptimer_status);
 
-uint16_t get_gptimer_intr(int timer_id)
+int get_gptimer_intr(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0;
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_intr);
 
@@ -203,10 +203,10 @@ void clear_gptimer_intr(int timer_id)
 }
 EXPORT_SYMBOL(clear_gptimer_intr);
 
-uint16_t get_gptimer_over(int timer_id)
+int get_gptimer_over(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
-	return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0;
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_over);
 
@@ -217,6 +217,13 @@ void clear_gptimer_over(int timer_id)
 }
 EXPORT_SYMBOL(clear_gptimer_over);
 
+int get_gptimer_run(int timer_id)
+{
+	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_run);
+
 void set_gptimer_config(int timer_id, uint16_t config)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
@@ -244,7 +251,7 @@ void enable_gptimers(uint16_t mask)
 }
 EXPORT_SYMBOL(enable_gptimers);
 
-void disable_gptimers(uint16_t mask)
+static void _disable_gptimers(uint16_t mask)
 {
 	int i;
 	uint16_t m = mask;
@@ -253,6 +260,12 @@ void disable_gptimers(uint16_t mask)
 		group_regs[i]->disable = m & 0xFF;
 		m >>= 8;
 	}
+}
+
+void disable_gptimers(uint16_t mask)
+{
+	int i;
+	_disable_gptimers(mask);
 	for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
 		if (mask & (1 << i))
 			group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
@@ -260,6 +273,13 @@ void disable_gptimers(uint16_t mask)
 }
 EXPORT_SYMBOL(disable_gptimers);
 
+void disable_gptimers_sync(uint16_t mask)
+{
+	_disable_gptimers(mask);
+	SSYNC();
+}
+EXPORT_SYMBOL(disable_gptimers_sync);
+
 void set_gptimer_pulse_hi(int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index a5de8d45424..5fc424803a1 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -167,7 +167,7 @@ int __ipipe_check_root(void)
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = desc->ic_prio;
+	int prio = __ipipe_get_irq_priority(irq);
 
 	desc->depth = 0;
 	if (ipd != &ipipe_root &&
@@ -178,8 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_to_desc(irq);
-	int prio = desc->ic_prio;
+	int prio = __ipipe_get_irq_priority(irq);
 
 	if (ipd != &ipipe_root &&
 	    atomic_dec_and_test(&__ipipe_irq_lvdepth[prio]))
@@ -310,12 +309,16 @@ int ipipe_trigger_irq(unsigned irq)
 
 asmlinkage void __ipipe_sync_root(void)
 {
+	void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 	unsigned long flags;
 
 	BUG_ON(irqs_disabled());
 
 	local_irq_save_hw(flags);
 
+	if (irq_tail_hook)
+		irq_tail_hook();
+
 	clear_thread_flag(TIF_IRQ_SYNC);
 
 	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 401bd32aa49..6e31e935bb3 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -59,12 +59,14 @@ static struct irq_chip bad_chip = {
 	.unmask = dummy_mask_unmask_irq,
 };
 
+static int bad_stats;
 static struct irq_desc bad_irq_desc = {
 	.status = IRQ_DISABLED,
 	.chip = &bad_chip,
 	.handle_irq = handle_bad_irq,
 	.depth = 1,
 	.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
+	.kstat_irqs = &bad_stats,
 #ifdef CONFIG_SMP
 	.affinity = CPU_MASK_ALL
 #endif
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index b163f6d3330..da28f796ad7 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -466,7 +466,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
 	int cpu = raw_smp_processor_id();
 
 	if (size < 0)
-		return EFAULT;
+		return -EFAULT;
 	if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
 		return 0;
 	if (addr >= SYSMMR_BASE)
@@ -498,7 +498,7 @@ static int validate_memory_access_address(unsigned long addr, int size)
 	if (IN_MEM(addr, size, L2_START, L2_LENGTH))
 		return 0;
 
-	return EFAULT;
+	return -EFAULT;
 }
 
 /*
@@ -508,14 +508,15 @@ static int validate_memory_access_address(unsigned long addr, int size)
 int kgdb_mem2hex(char *mem, char *buf, int count)
 {
 	char *tmp;
-	int err = 0;
+	int err;
 	unsigned char *pch;
 	unsigned short mmr16;
 	unsigned long mmr32;
 	int cpu = raw_smp_processor_id();
 
-	if (validate_memory_access_address((unsigned long)mem, count))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, count);
+	if (err)
+		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -533,7 +534,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 				*tmp++ = *pch++;
 				tmp -= 2;
 			} else
-				err = EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
@@ -545,10 +546,10 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 				*tmp++ = *pch++;
 				tmp -= 4;
 			} else
-				err = EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			err = EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -557,7 +558,7 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 		) {
 		/* access L1 instruction SRAM*/
 		if (dma_memcpy(tmp, mem, count) == NULL)
-			err = EFAULT;
+			err = -EFAULT;
 	} else
 		err = probe_kernel_read(tmp, mem, count);
 
@@ -585,24 +586,24 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 	char *tmp_new;
 	unsigned short *mmr16;
 	unsigned long *mmr32;
-	int err = 0;
-	int size = 0;
+	int err;
+	int size;
 	int cpu = raw_smp_processor_id();
 
 	tmp_old = tmp_new = buf;
 
-	while (count-- > 0) {
+	for (size = 0; size < count; ++size) {
 		if (*tmp_old == 0x7d)
 			*tmp_new = *(++tmp_old) ^ 0x20;
 		else
 			*tmp_new = *tmp_old;
 		tmp_new++;
 		tmp_old++;
-		size++;
 	}
 
-	if (validate_memory_access_address((unsigned long)mem, size))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, size);
+	if (err)
+		return err;
 
 	if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
 		switch (size) {
@@ -611,17 +612,17 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 				mmr16 = (unsigned short *)buf;
 				*(unsigned short *)mem = *mmr16;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
 				mmr32 = (unsigned long *)buf;
 				*(unsigned long *)mem = *mmr32;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			return EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -630,7 +631,7 @@ int kgdb_ebin2mem(char *buf, char *mem, int count)
 		) {
 		/* access L1 instruction SRAM */
 		if (dma_memcpy(mem, buf, size) == NULL)
-			err = EFAULT;
+			err = -EFAULT;
 	} else
 		err = probe_kernel_write(mem, buf, size);
 
@@ -648,10 +649,12 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 	char *tmp_hex;
 	unsigned short *mmr16;
 	unsigned long *mmr32;
+	int err;
 	int cpu = raw_smp_processor_id();
 
-	if (validate_memory_access_address((unsigned long)mem, count))
-		return EFAULT;
+	err = validate_memory_access_address((unsigned long)mem, count);
+	if (err)
+		return err;
 
 	/*
 	 * We use the upper half of buf as an intermediate buffer for the
@@ -673,17 +676,17 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 				mmr16 = (unsigned short *)tmp_raw;
 				*(unsigned short *)mem = *mmr16;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		case 4:
 			if ((unsigned int)mem % 4 == 0) {
 				mmr32 = (unsigned long *)tmp_raw;
 				*(unsigned long *)mem = *mmr32;
 			} else
-				return EFAULT;
+				err = -EFAULT;
 			break;
 		default:
-			return EFAULT;
+			err = -EFAULT;
 		}
 	} else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
 #ifdef CONFIG_SMP
@@ -692,10 +695,11 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 		) {
 		/* access L1 instruction SRAM */
 		if (dma_memcpy(mem, tmp_raw, count) == NULL)
-			return EFAULT;
+			err = -EFAULT;
 	} else
-		return probe_kernel_write(mem, tmp_raw, count);
-	return 0;
+		err = probe_kernel_write(mem, tmp_raw, count);
+
+	return err;
 }
 
 int kgdb_validate_break_address(unsigned long addr)
@@ -715,7 +719,7 @@ int kgdb_validate_break_address(unsigned long addr)
 	if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH))
 		return 0;
 
-	return EFAULT;
+	return -EFAULT;
 }
 
 int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 1bd7f2d018a..d5aee362668 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -201,8 +201,8 @@ apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 /*            Arithmetic relocations are handled.                        */
 /*            We do not expect LSETUP to be split and hence is not       */
 /*            handled.                                                   */
-/*            R_byte and R_byte2 are also not handled as the gas         */
-/*            does not generate it.                                      */
+/*            R_BFIN_BYTE and R_BFIN_BYTE2 are also not handled as the   */
+/*            gas does not generate it.                                  */
 /*************************************************************************/
 int
 apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
@@ -243,8 +243,8 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 #endif
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
-		case R_pcrel24:
-		case R_pcrel24_jump_l:
+		case R_BFIN_PCREL24:
+		case R_BFIN_PCREL24_JUMP_L:
 			/* Add the value, subtract its postition */
 			location16 =
 			    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
@@ -266,18 +266,18 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			    (*location16 & 0xff00) | (value >> 16 & 0x00ff);
 			*(location16 + 1) = value & 0xffff;
 			break;
-		case R_pcrel12_jump:
-		case R_pcrel12_jump_s:
+		case R_BFIN_PCREL12_JUMP:
+		case R_BFIN_PCREL12_JUMP_S:
 			value -= (uint32_t) location32;
 			value >>= 1;
 			*location16 = (value & 0xfff);
 			break;
-		case R_pcrel10:
+		case R_BFIN_PCREL10:
 			value -= (uint32_t) location32;
 			value >>= 1;
 			*location16 = (value & 0x3ff);
 			break;
-		case R_luimm16:
+		case R_BFIN_LUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       (value & 0xffff));
 			tmp = (value & 0xffff);
@@ -286,7 +286,7 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			} else
 				*location16 = tmp;
 			break;
-		case R_huimm16:
+		case R_BFIN_HUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       ((value >> 16) & 0xffff));
 			tmp = ((value >> 16) & 0xffff);
@@ -295,10 +295,10 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			} else
 				*location16 = tmp;
 			break;
-		case R_rimm16:
+		case R_BFIN_RIMM16:
 			*location16 = (value & 0xffff);
 			break;
-		case R_byte4_data:
+		case R_BFIN_BYTE4_DATA:
 			pr_debug("before %x after %x\n", *location32, value);
 			*location32 = value;
 			break;
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index e040e03335e..30d0843ed70 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -322,6 +322,9 @@ void finish_atomic_sections (struct pt_regs *regs)
 }
 
 #if defined(CONFIG_ACCESS_CHECK)
+#ifdef CONFIG_ACCESS_OK_L1
+__attribute__((l1_text))
+#endif
 /* Return 1 if access to memory range is OK, 0 otherwise */
 int _access_ok(unsigned long addr, unsigned long size)
 {
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index a58687bdee6..80447f99c2b 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -18,9 +18,12 @@
 #include <linux/tty.h>
 #include <linux/pfn.h>
 
+#ifdef CONFIG_MTD_UCLINUX
+#include <linux/mtd/map.h>
 #include <linux/ext2_fs.h>
 #include <linux/cramfs_fs.h>
 #include <linux/romfs_fs.h>
+#endif
 
 #include <asm/cplb.h>
 #include <asm/cacheflush.h>
@@ -45,6 +48,7 @@ EXPORT_SYMBOL(_ramend);
 EXPORT_SYMBOL(reserved_mem_dcache_on);
 
 #ifdef CONFIG_MTD_UCLINUX
+extern struct map_info uclinux_ram_map;
 unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
 unsigned long _ebss;
 EXPORT_SYMBOL(memory_mtd_end);
@@ -150,40 +154,45 @@ void __init bfin_relocate_l1_mem(void)
 	unsigned long l1_data_b_length;
 	unsigned long l2_length;
 
+	/*
+	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
+	 * we know that everything about l1 text/data is nice and aligned,
+	 * so copy by 4 byte chunks, and don't worry about overlapping
+	 * src/dest.
+	 *
+	 * We can't use the dma_memcpy functions, since they can call
+	 * scheduler functions which might be in L1 :( and core writes
+	 * into L1 instruction cause bad access errors, so we are stuck,
+	 * we are required to use DMA, but can't use the common dma
+	 * functions. We can't use memcpy either - since that might be
+	 * going to be in the relocated L1
+	 */
+
 	blackfin_dma_early_init();
 
+	/* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
 	l1_code_length = _etext_l1 - _stext_l1;
-	if (l1_code_length > L1_CODE_LENGTH)
-		panic("L1 Instruction SRAM Overflow\n");
-	/* cannot complain as printk is not available as yet.
-	 * But we can continue booting and complain later!
-	 */
-
-	/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
-	dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+	if (l1_code_length)
+		early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
 
+	/* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
 	l1_data_a_length = _sbss_l1 - _sdata_l1;
-	if (l1_data_a_length > L1_DATA_A_LENGTH)
-		panic("L1 Data SRAM Bank A Overflow\n");
-
-	/* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
-	dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+	if (l1_data_a_length)
+		early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
 
+	/* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
 	l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
-	if (l1_data_b_length > L1_DATA_B_LENGTH)
-		panic("L1 Data SRAM Bank B Overflow\n");
-
-	/* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
-	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+	if (l1_data_b_length)
+		early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
 
+	early_dma_memcpy_done();
+
+	/* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
 	if (L2_LENGTH != 0) {
 		l2_length = _sbss_l2 - _stext_l2;
-		if (l2_length > L2_LENGTH)
-			panic("L2 SRAM Overflow\n");
-
-		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
-		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+		if (l2_length)
+			memcpy(_stext_l2, _l2_lma_start, l2_length);
 	}
 }
 
@@ -472,7 +481,7 @@ static __init void memory_setup(void)
 
 	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
 		console_init();
-		panic("DMA region exceeds memory limit: %lu.\n",
+		panic("DMA region exceeds memory limit: %lu.",
 			_ramend - _ramstart);
 	}
 	memory_end = _ramend - DMA_UNCACHED_REGION;
@@ -526,14 +535,13 @@ static __init void memory_setup(void)
 
 	if (mtd_size == 0) {
 		console_init();
-		panic("Don't boot kernel without rootfs attached.\n");
+		panic("Don't boot kernel without rootfs attached.");
 	}
 
 	/* Relocate MTD image to the top of memory after the uncached memory area */
-	dma_memcpy((char *)memory_end, _end, mtd_size);
-
-	memory_mtd_start = memory_end;
-	_ebss = memory_mtd_start;	/* define _ebss for compatible */
+	uclinux_ram_map.phys = memory_mtd_start = memory_end;
+	uclinux_ram_map.size = mtd_size;
+	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
@@ -796,10 +804,8 @@ void __init setup_arch(char **cmdline_p)
 	cclk = get_cclk();
 	sclk = get_sclk();
 
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
-	if (ANOMALY_05000273 && cclk == sclk)
-		panic("ANOMALY 05000273, SCLK can not be same as CCLK");
-#endif
+	if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk)
+		panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK");
 
 #ifdef BF561_FAMILY
 	if (ANOMALY_05000266) {
@@ -881,7 +887,7 @@ void __init setup_arch(char **cmdline_p)
 				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
 				       bfin_compiled_revid(), bfin_revid());
 				if (bfin_compiled_revid() > bfin_revid())
-					panic("Error: you are missing anomaly workarounds for this rev\n");
+					panic("Error: you are missing anomaly workarounds for this rev");
 			}
 		}
 		if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
@@ -891,16 +897,13 @@ void __init setup_arch(char **cmdline_p)
 
 	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
 	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448\n");
+		panic("You can't run on this processor due to 05000448");
 
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
 	       cclk / 1000000, sclk / 1000000);
 
-	if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
-		printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-
 	setup_bootmem_allocator();
 
 	paging_init();
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index fce49d7cf00..a8f1329c15a 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -78,11 +78,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return do_mmap2(addr, len, prot, flags, fd, pgoff);
 }
 
-asmlinkage int sys_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
 asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
 {
 	return sram_alloc_with_lsl(size, flags);
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 27646121280..0791eba40d9 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -20,8 +20,9 @@
 
 #include <asm/blackfin.h>
 #include <asm/time.h>
+#include <asm/gptimers.h>
 
-#ifdef CONFIG_CYCLES_CLOCKSOURCE
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
@@ -58,15 +59,15 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-static cycle_t read_cycles(struct clocksource *cs)
+static cycle_t bfin_read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
-static struct clocksource clocksource_bfin = {
-	.name		= "bfin_cycles",
+static struct clocksource bfin_cs_cycles = {
+	.name		= "bfin_cs_cycles",
 	.rating		= 350,
-	.read		= read_cycles,
+	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.shift		= 22,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -74,53 +75,198 @@ static struct clocksource clocksource_bfin = {
 
 unsigned long long sched_clock(void)
 {
-	return cycles_2_ns(read_cycles(&clocksource_bfin));
+	return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles));
 }
 
-static int __init bfin_clocksource_init(void)
+static int __init bfin_cs_cycles_init(void)
 {
 	set_cyc2ns_scale(get_cclk() / 1000);
 
-	clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift);
+	bfin_cs_cycles.mult = \
+		clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
 
-	if (clocksource_register(&clocksource_bfin))
+	if (clocksource_register(&bfin_cs_cycles))
 		panic("failed to register clocksource");
 
 	return 0;
 }
+#else
+# define bfin_cs_cycles_init()
+#endif
+
+#ifdef CONFIG_GPTMR0_CLOCKSOURCE
+
+void __init setup_gptimer0(void)
+{
+	disable_gptimers(TIMER0bit);
+
+	set_gptimer_config(TIMER0_id, \
+		TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+	set_gptimer_period(TIMER0_id, -1);
+	set_gptimer_pwidth(TIMER0_id, -2);
+	SSYNC();
+	enable_gptimers(TIMER0bit);
+}
+
+static cycle_t bfin_read_gptimer0(void)
+{
+	return bfin_read_TIMER0_COUNTER();
+}
+
+static struct clocksource bfin_cs_gptimer0 = {
+	.name		= "bfin_cs_gptimer0",
+	.rating		= 400,
+	.read		= bfin_read_gptimer0,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 22,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bfin_cs_gptimer0_init(void)
+{
+	setup_gptimer0();
 
+	bfin_cs_gptimer0.mult = \
+		clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
+
+	if (clocksource_register(&bfin_cs_gptimer0))
+		panic("failed to register clocksource");
+
+	return 0;
+}
 #else
-# define bfin_clocksource_init()
+# define bfin_cs_gptimer0_init()
 #endif
 
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static int bfin_timer_set_next_event(unsigned long, \
+		struct clock_event_device *);
+
+static void bfin_timer_set_mode(enum clock_event_mode, \
+		struct clock_event_device *);
+
+static struct clock_event_device clockevent_bfin = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	.name		= "bfin_gptimer0",
+	.rating		= 300,
+	.irq		= IRQ_TIMER0,
+#else
+	.name		= "bfin_core_timer",
+	.rating		= 350,
+	.irq		= IRQ_CORETMR,
+#endif
+	.shift		= 32,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = bfin_timer_set_next_event,
+	.set_mode	= bfin_timer_set_mode,
+};
+
+static struct irqaction bfin_timer_irq = {
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	.name		= "Blackfin GPTimer0",
+#else
+	.name		= "Blackfin CoreTimer",
+#endif
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= timer_interrupt,
+	.dev_id		= &clockevent_bfin,
+};
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 static int bfin_timer_set_next_event(unsigned long cycles,
                                      struct clock_event_device *evt)
 {
+	disable_gptimers(TIMER0bit);
+
+	/* it starts counting three SCLK cycles after the TIMENx bit is set */
+	set_gptimer_pwidth(TIMER0_id, cycles - 3);
+	enable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static void bfin_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC: {
+		set_gptimer_config(TIMER0_id, \
+			TIMER_OUT_DIS | TIMER_IRQ_ENA | \
+			TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+		set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+		set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+		enable_gptimers(TIMER0bit);
+		break;
+	}
+	case CLOCK_EVT_MODE_ONESHOT:
+		disable_gptimers(TIMER0bit);
+		set_gptimer_config(TIMER0_id, \
+			TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+		set_gptimer_period(TIMER0_id, 0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		disable_gptimers(TIMER0bit);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static void bfin_timer_ack(void)
+{
+	set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
+}
+
+static void __init bfin_timer_init(void)
+{
+	disable_gptimers(TIMER0bit);
+}
+
+static unsigned long  __init bfin_clockevent_check(void)
+{
+	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
+	return get_sclk();
+}
+
+#else /* CONFIG_TICKSOURCE_CORETMR */
+
+static int bfin_timer_set_next_event(unsigned long cycles,
+				struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
 	bfin_write_TCOUNT(cycles);
 	CSYNC();
+	bfin_write_TCNTL(TMPWR | TMREN);
 	return 0;
 }
 
 static void bfin_timer_set_mode(enum clock_event_mode mode,
-                                struct clock_event_device *evt)
+				struct clock_event_device *evt)
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC: {
 		unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
 		bfin_write_TCNTL(TMPWR);
-		bfin_write_TSCALE(TIME_SCALE - 1);
 		CSYNC();
+		bfin_write_TSCALE(TIME_SCALE - 1);
 		bfin_write_TPERIOD(tcount);
 		bfin_write_TCOUNT(tcount);
-		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
 		CSYNC();
+		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
 		break;
 	}
 	case CLOCK_EVT_MODE_ONESHOT:
+		bfin_write_TCNTL(TMPWR);
+		CSYNC();
 		bfin_write_TSCALE(TIME_SCALE - 1);
+		bfin_write_TPERIOD(0);
 		bfin_write_TCOUNT(0);
-		bfin_write_TCNTL(TMPWR | TMREN);
-		CSYNC();
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
@@ -132,6 +278,10 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
+static void bfin_timer_ack(void)
+{
+}
+
 static void __init bfin_timer_init(void)
 {
 	/* power up the timer, but don't enable it just yet */
@@ -145,38 +295,32 @@ static void __init bfin_timer_init(void)
 	bfin_write_TPERIOD(0);
 	bfin_write_TCOUNT(0);
 
-	/* now enable the timer */
 	CSYNC();
 }
 
+static unsigned long  __init bfin_clockevent_check(void)
+{
+	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+	return get_cclk() / TIME_SCALE;
+}
+
+void __init setup_core_timer(void)
+{
+	bfin_timer_init();
+	bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-static struct clock_event_device clockevent_bfin = {
-	.name		= "bfin_core_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event = bfin_timer_set_next_event,
-	.set_mode	= bfin_timer_set_mode,
-};
-
-static struct irqaction bfin_timer_irq = {
-	.name		= "Blackfin Core Timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &clockevent_bfin,
-};
-
 irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = dev_id;
+	smp_mb();
 	evt->event_handler(evt);
+	bfin_timer_ack();
 	return IRQ_HANDLED;
 }
 
@@ -184,9 +328,8 @@ static int __init bfin_clockevent_init(void)
 {
 	unsigned long timer_clk;
 
-	timer_clk = get_cclk() / TIME_SCALE;
+	timer_clk = bfin_clockevent_check();
 
-	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
 	bfin_timer_init();
 
 	clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
@@ -218,6 +361,7 @@ void __init time_init(void)
 	xtime.tv_nsec = 0;
 	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
-	bfin_clocksource_init();
+	bfin_cs_cycles_init();
+	bfin_cs_gptimer0_init();
 	bfin_clockevent_init();
 }
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 1bbacfbd4c5..adb54aa7d7c 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -24,14 +24,10 @@
 
 static struct irqaction bfin_timer_irq = {
 	.name = "Blackfin Timer Tick",
-#ifdef CONFIG_IRQ_PER_CPU
-	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#else
 	.flags = IRQF_DISABLED
-#endif
 };
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 void __init setup_system_timer0(void)
 {
 	/* Power down the core timer, just to play safe. */
@@ -74,7 +70,7 @@ void __init setup_core_timer(void)
 static void __init
 time_sched_init(irqreturn_t(*timer_routine) (int, void *))
 {
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 	setup_system_timer0();
 	bfin_timer_irq.handler = timer_routine;
 	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
@@ -94,7 +90,7 @@ static unsigned long gettimeoffset(void)
 	unsigned long offset;
 	unsigned long clocks_per_jiffy;
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_IPIPE)
 	clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
 	offset = bfin_read_TIMER0_COUNTER() / \
 		(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
@@ -133,36 +129,25 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 	static long last_rtc_update;
 
 	write_seqlock(&xtime_lock);
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
+	do_timer(1);
+
 	/*
-	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
-	 * enabled.
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
-#endif
-		do_timer(1);
-
-		/*
-		 * If we have an externally synchronized Linux clock, then update
-		 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-		 * called as close as possible to 500 ms before the new second starts.
-		 */
-		if (ntp_synced() &&
-		    xtime.tv_sec > last_rtc_update + 660 &&
-		    (xtime.tv_nsec / NSEC_PER_USEC) >=
-		    500000 - ((unsigned)TICK_SIZE) / 2
-		    && (xtime.tv_nsec / NSEC_PER_USEC) <=
-		    500000 + ((unsigned)TICK_SIZE) / 2) {
-			if (set_rtc_mmss(xtime.tv_sec) == 0)
-				last_rtc_update = xtime.tv_sec;
-			else
-				/* Do it again in 60s. */
-				last_rtc_update = xtime.tv_sec - 600;
-		}
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-		set_gptimer_status(0, TIMER_STATUS_TIMIL0);
+	if (ntp_synced() &&
+	    xtime.tv_sec > last_rtc_update + 660 &&
+	    (xtime.tv_nsec / NSEC_PER_USEC) >=
+	    500000 - ((unsigned)TICK_SIZE) / 2
+	    && (xtime.tv_nsec / NSEC_PER_USEC) <=
+	    500000 + ((unsigned)TICK_SIZE) / 2) {
+		if (set_rtc_mmss(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else
+			/* Do it again in 60s. */
+			last_rtc_update = xtime.tv_sec - 600;
 	}
-#endif
 	write_sequnlock(&xtime_lock);
 
 #ifdef CONFIG_IPIPE
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index ffe7fb53ecc..aa76dfb0226 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -68,6 +68,13 @@
 	({ if (0) printk(fmt, ##arg); 0; })
 #endif
 
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+u32 last_seqstat;
+#ifdef CONFIG_DEBUG_MMRS_MODULE
+EXPORT_SYMBOL(last_seqstat);
+#endif
+#endif
+
 /* Initiate the event table handler */
 void __init trap_init(void)
 {
@@ -79,7 +86,6 @@ void __init trap_init(void)
 static void decode_address(char *buf, unsigned long address)
 {
 #ifdef CONFIG_DEBUG_VERBOSE
-	struct vm_list_struct *vml;
 	struct task_struct *p;
 	struct mm_struct *mm;
 	unsigned long flags, offset;
@@ -196,6 +202,11 @@ done:
 
 asmlinkage void double_fault_c(struct pt_regs *fp)
 {
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int j;
+	trace_buffer_save(j);
+#endif
+
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
@@ -220,9 +231,10 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
+		dump_bfin_trace_buffer();
 	}
 #endif
-	panic("Double Fault - unrecoverable event\n");
+	panic("Double Fault - unrecoverable event");
 
 }
 
@@ -239,6 +251,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
 
 	trace_buffer_save(j);
+#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
+	last_seqstat = (u32)fp->seqstat;
+#endif
 
 	/* Important - be very careful dereferncing pointers - will lead to
 	 * double faults if the stack has become corrupt
@@ -588,6 +603,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
+	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+		fp->pc = SAFE_USER_INSTRUCTION;
+
 	trace_buffer_restore(j);
 	return;
 }
@@ -832,6 +850,11 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	decode_address(buf, (unsigned int)stack);
 	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
 
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
 	/* First thing is to look for a frame pointer */
 	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
 		if (*addr & 0x1)
@@ -1066,6 +1089,29 @@ void show_regs(struct pt_regs *fp)
 	unsigned int cpu = smp_processor_id();
 	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
+	verbose_printk(KERN_NOTICE "\n");
+	if (CPUID != bfin_cpuid())
+		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		verbose_printk("(Detected 0.%d)", bfin_revid());
+
+	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	verbose_printk(KERN_NOTICE "%s", linux_banner);
+
 	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
 		(long)fp->seqstat, fp->ipend, fp->syscfg);
@@ -1246,5 +1292,5 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_stack();
-	panic("Unrecoverable event\n");
+	panic("Unrecoverable event");
 }
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 27952ae047d..8b67167cb4f 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -50,7 +50,9 @@ SECTIONS
 		_text = .;
 		__stext = .;
 		TEXT_TEXT
+#ifndef CONFIG_SCHEDULE_L1
 		SCHED_TEXT
+#endif
 		LOCK_TEXT
 		KPROBES_TEXT
 		*(.text.*)
@@ -180,6 +182,9 @@ SECTIONS
 		. = ALIGN(4);
 		__stext_l1 = .;
 		*(.l1.text)
+#ifdef CONFIG_SCHEDULE_L1
+		SCHED_TEXT
+#endif
 		. = ALIGN(4);
 		__etext_l1 = .;
 	}
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
index 2aaae78a68e..46518b1d298 100644
--- a/arch/blackfin/lib/strncmp.c
+++ b/arch/blackfin/lib/strncmp.c
@@ -8,9 +8,8 @@
 
 #define strncmp __inline_strncmp
 #include <asm/string.h>
-#undef strncmp
-
 #include <linux/module.h>
+#undef strncmp
 
 int strncmp(const char *cs, const char *ct, size_t count)
 {
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index f397ede006b..4c76fefb7a3 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -156,6 +156,7 @@ config IRQ_PORTH_INTB
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 41f2eacfef2..62bba09bcce 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -82,7 +82,11 @@ static struct physmap_flash_data ezbrd_flash_data = {
 
 static struct resource ezbrd_flash_resource = {
 	.start = 0x20000000,
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	.end   = 0x202fffff,
+#else
 	.end   = 0x203fffff,
+#endif
 	.flags = IORESOURCE_MEM,
 };
 
@@ -162,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -249,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -514,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -678,6 +682,11 @@ static int __init ezbrd_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
+	peripheral_request(P_AMS2, "ParaFlash");
+#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE)
+	peripheral_request(P_AMS3, "ParaFlash");
+#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index c847bb10107..b69bd9af38d 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -6,14 +6,19 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
+/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF518 silicon version
+#endif
+
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
@@ -47,7 +52,7 @@
 #define ANOMALY_05000435 (1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
 #define ANOMALY_05000438 (1)
-/* Preboot Cannot be Used to Program the PLL_DIV Register */
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
 #define ANOMALY_05000439 (1)
 /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
 #define ANOMALY_05000440 (1)
@@ -61,32 +66,56 @@
 #define ANOMALY_05000453 (1)
 /* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
 #define ANOMALY_05000455 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000119 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index f618b487b2b..a0fc77fd331 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -185,6 +185,10 @@
 #define P_PTP_PPS		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
 #define P_PTP_CLKOUT		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
 
-#define P_HWAIT		(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
+/* AMS */
+#define P_AMS2			(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_AMS3			(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
 
 #endif				/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 8438ec6d667..848ac6f8682 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -170,6 +170,7 @@ config IRQ_PORTH_INTB
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 48e69eecdba..6d6f9effa0b 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 7fe480e4ebe..1435c5d38cd 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index d0864111ef5..147edd1eb1a 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -509,6 +509,13 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_PBX)
 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 	.ctl_reg	= 0x4, /* send zero */
@@ -593,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -624,6 +631,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 3,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+
 #if defined(CONFIG_PBX)
 	{
 		.modalias = "fxs-spi",
@@ -836,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index df6808d8a6e..c84ddea9574 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -6,14 +6,19 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
- *  - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
+/* This file should be up to date with:
+ *  - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+/* We do not support old silicon - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF526/BF527 silicon version
+#endif
+
 #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
 # define ANOMALY_BF526 1
 #else
@@ -25,158 +30,203 @@
 # define ANOMALY_BF527 0
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
+#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
+#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
-#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
+/* Host DMA Boot Modes Are Not Functional */
+#define ANOMALY_05000330 (__SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
 /* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
 /* Security Features Are Not Functional */
-#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
 /* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (ANOMALY_BF526)
+#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
+#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Incorrect Default CSEL Value in PLL_DIV */
-#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
 /* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
 /* 8-Bit NAND Flash Boot Mode Not Functional */
-#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
-/* Host Must Not Read Back During Host DMA Boot */
-#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Boot from OTP Memory Not Functional */
-#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Routine Not Functional */
-#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
 /* Programmable Preboot Settings Not Functional */
-#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
 /* CRC32 Checksum Support Not Functional */
-#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
 /* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
 /* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
 /* Log Buffer Not Functional */
-#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
 /* Hook Routine Not Functional */
-#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
 /* Header Indirect Bit Not Functional */
-#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
 /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
-#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
 /* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
-#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
 /* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
-#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Firmware Does Not Save/Restore Full Context */
 #define ANOMALY_05000405 (1)
 /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
 #define ANOMALY_05000408 (1)
 /* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Default Internal Voltage Regulator Setting */
-#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* DEB2_URGENT Bit Not Functional */
-#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
 #define ANOMALY_05000416 (1)
 /* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
-#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
-/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
-#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
+/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
-#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
 #define ANOMALY_05000421 (1)
 /* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
-#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
 /* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
-#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Internal Voltage Regulator Not Trimmed */
-#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
-#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
-#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
-#define ANOMALY_05000432 (ANOMALY_BF526)
+#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* Preboot Cannot be Used to Alter the PLL_DIV Register */
+#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
+#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* The WURESET Bit in the SYSCR Register is not Functional */
+#define ANOMALY_05000445 (1)
+/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
+#define ANOMALY_05000451 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
index 14427de7d77..4c572443147 100644
--- a/arch/blackfin/mach-bf533/Kconfig
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -59,6 +59,7 @@ config DMA7_UARTTX
 	default 10
 config TIMER0
 	int "TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config TIMER1
 	int "TIMER1"
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 0c66bf44cfa..895f213ea45 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.ctl_reg = 0x1000,
@@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 4,     /* actual baudrate is SCLK/(2xspeed_hz) */
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e8974878d8c..a727e538fa2 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif
 
 /* SPI ADC chip */
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
 	.bits_per_word = 16,
@@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08cd0969de4..842f1c9c239 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index db96f33f72e..e19c565ade1 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -448,7 +448,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 1cf893e2e55..31145b509e2 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
@@ -34,12 +34,12 @@
 # define ANOMALY_BF533 0
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
 /* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
-#define ANOMALY_05000105 (1)
+#define ANOMALY_05000105 (__SILICON_REVISION__ > 2)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
@@ -48,7 +48,7 @@
 #define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
 /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
-/* Turning Serial Ports on with External Frame Syncs */
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
@@ -67,9 +67,9 @@
 /* Current DMA Address Shows Wrong Value During Carry Fix */
 #define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
 /* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
-#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000200 (__SILICON_REVISION__ == 3 || __SILICON_REVISION__ == 4)
 /* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
-#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000201 (__SILICON_REVISION__ == 3)
 /* Possible Infinite Stall with Specific Dual-DAG Situation */
 #define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
 /* Specific Sequence That Can Cause DMA Error or DMA Stopping */
@@ -104,7 +104,7 @@
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Data CPLBs Should Prevent Spurious Hardware Errors */
 #define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
@@ -137,7 +137,7 @@
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
 /* Spontaneous Reset of Internal Voltage Regulator */
-#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000271 (__SILICON_REVISION__ == 3)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
 /* Writes to Synchronous SDRAM Memory May Be Lost */
@@ -165,14 +165,14 @@
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
-#define ANOMALY_05000307 (1)
+#define ANOMALY_05000307 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
 #define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
@@ -200,17 +200,63 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
  */
 
+/* Internal voltage regulator can't be modified via register writes */
+#define ANOMALY_05000066 (__SILICON_REVISION__ < 2)
 /* Watchpoints (Hardware Breakpoints) are not supported */
 #define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* SDRAM PSSE bit cannot be set again after SDRAM Powerup */
+#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
+/* Writing FIO_DIR can corrupt a programmable flag's data */
+#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
+/* Timer Auto-Baud Mode requires the UART clock to be enabled */
+#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
+/* Internal Clocking Modes on SPORT0 not supported */
+#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
+/* Internal voltage regulator does not wake up from an RTC wakeup */
+#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
+/* The IFLUSH instruction must be preceded by a CSYNC instruction */
+#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
+/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */
+#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
+/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */
+#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
+/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
+#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
+/* 32-bit SPORT DMA will be word reversed */
+#define ANOMALY_05000098 (__SILICON_REVISION__ < 2)
+/* Incorrect status in the UART_IIR register */
+#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
+/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
+#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
+/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
+/* Incorrect value written to the cycle counters */
+#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
+/* Stores to L1 Data memory incorrect when a specific sequence is followed */
+#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
+/* Programmable Flag (PF3) functionality not supported in all PPI modes */
+#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
+/* Data store can be lost when targeting a cache line fill */
+#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
 /* Reserved bits in SYSCFG register not set at power on */
 #define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Infinite Core Stall */
+#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
+/* PPI_FSx may glitch when generated by the on chip Timers */
+#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
 /* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
+#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
+/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
+#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
 /* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
 #define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
@@ -222,7 +268,9 @@
 /* DMEM_CONTROL is not set on Reset */
 #define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
 /* SPI boot will not complete if there is a zero fill block in the loader file */
-#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
+/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */
+#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
 /* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
@@ -237,17 +285,17 @@
 #define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
 /* MDMA may lose the first few words of a descriptor chain */
 #define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
-/* The source MDMA descriptor may stop with a DMA Error */
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
 #define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
 /* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
 #define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
 /* Frame Delay in SPORT Multichannel Mode */
 #define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
-/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
 #define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
 /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
 #define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
-/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
 /* SPORT transmit data is not gated by external frame sync in certain conditions */
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
@@ -275,15 +323,27 @@
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index bbc08fd4f12..d81224f9d72 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -66,6 +66,7 @@ config IRQ_MAC_TX
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 41c75b9bfac..4fee1967312 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e1de1e53f8..26707ce39f2 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 0572926da23..dfb5036f8a6 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -607,6 +607,43 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 	.enable_dma = 0,
@@ -695,8 +732,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -1280,7 +1317,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF5,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -1312,6 +1349,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PG3,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1358,16 +1402,18 @@ static struct resource bfin_pata_resources[] = {
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 0,
 };
-
+/* CompactFlash Storage Card Memory Mapped Adressing
+ * /REG = A11 = 1
+ */
 static struct resource bfin_pata_resources[] = {
 	{
-		.start = 0x20211820,
-		.end = 0x2021183F,
+		.start = 0x20211800,
+		.end = 0x20211807,
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start = 0x2021181C,
-		.end = 0x2021181F,
+		.start = 0x2021180E,	/* Device Ctl */
+		.end = 0x2021180E,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -1527,7 +1573,8 @@ static int __init stamp_init(void)
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
+	 && defined(PATA_INT)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 53ad10f3cd7..28057459120 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 1bfd80c26c9..fc966342546 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
@@ -36,77 +36,75 @@
 
 /* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
-/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
-/* Rx.H cannot be used to access 16-bit System MMR registers */
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
-/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
-#define ANOMALY_05000167 (1)
-/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
 /* Instruction Cache Is Not Functional */
 #define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* CLKIN Buffer Output Enable Reset Behavior Is Changed */
 #define ANOMALY_05000247 (1)
-/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
 /* EMAC Tx DMA error after an early frame abort */
 #define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
-/* Maximum external clock speed for Timers */
+/* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
 #define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
-/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
 #define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
 /* EMAC MDIO input latched on wrong MDC edge */
 #define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
-/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
 #define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
-/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
 #define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
-/* ICPLB_STATUS MMR register may be corrupted */
+/* ICPLB_STATUS MMR Register May Be Corrupted */
 #define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
-/* Stores to data cache may be lost */
+/* Stores To Data Cache May Be Lost */
 #define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
-/* Hardware loop corrupted when taking an ICPLB exception */
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
 #define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
-/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
-/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
 #define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
-/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
-/* Certain data cache write through modes fail for VDDint <=0.9V */
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* Writes to Synchronous SDRAM memory may be lost */
+/* Writes to Synchronous SDRAM Memory May Be Lost */
 #define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
-/* Disabling Peripherals with DMA running may cause DMA system instability */
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
 /* SPI Master boot mode does not work well with Atmel Data flash devices */
 #define ANOMALY_05000280 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
-/* Memory DMA corruption with 32-bit data and traffic control */
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
 /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
 /* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
 #define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
-/* SPORTs may receive bad data if FIFOs fill up */
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
-/* Memory to memory DMA source/destination descriptors must be in same memory space */
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
@@ -116,11 +114,11 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
 /* Writing UART_THR while UART clock is disabled sends erroneous start bit */
 #define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
-/* False hardware errors caused by fetches at the boundary of reserved memory */
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI is level sensitive on first transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
@@ -156,24 +154,46 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/Kconfig b/arch/blackfin/mach-bf538/Kconfig
index f068c3523cd..2d280f504ab 100644
--- a/arch/blackfin/mach-bf538/Kconfig
+++ b/arch/blackfin/mach-bf538/Kconfig
@@ -57,6 +57,7 @@ config IRQ_UART0_TX
 	default 10
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 3a569982736..175ca9ef723 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List
  *  - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List
  */
@@ -14,17 +14,29 @@
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+/* We do not support old silicon - sorry */
 #if __SILICON_REVISION__ < 4
-# error will not work on BF538 silicon version 0.0, 0.1, 0.2, or 0.3
+# error will not work on BF538/BF539 silicon version 0.0, 0.1, 0.2, or 0.3
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#if defined(__ADSPBF538__)
+# define ANOMALY_BF538 1
+#else
+# define ANOMALY_BF538 0
+#endif
+#if defined(__ADSPBF539__)
+# define ANOMALY_BF539 1
+#else
+# define ANOMALY_BF539 0
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
 /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
 #define ANOMALY_05000179 (1)
@@ -40,13 +52,13 @@
 #define ANOMALY_05000229 (1)
 /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
 #define ANOMALY_05000233 (1)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (1)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 4)
@@ -58,11 +70,11 @@
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
-/* False Hardware Error Exception when ISR Context Is Not Restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
-/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
@@ -80,14 +92,14 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
-/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
 /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
-#define ANOMALY_05000318 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (__SILICON_REVISION__ < 5)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -114,23 +126,45 @@
 #define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index ea25371a922..6f628353dde 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -68,25 +68,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-
-#define bfin_write_MDMA_D0_IRQ_STATUS	bfin_write_MDMA0_D0_IRQ_STATUS
-#define bfin_write_MDMA_D0_START_ADDR   bfin_write_MDMA0_D0_START_ADDR
-#define bfin_write_MDMA_S0_START_ADDR   bfin_write_MDMA0_S0_START_ADDR
-#define bfin_write_MDMA_D0_X_COUNT      bfin_write_MDMA0_D0_X_COUNT
-#define bfin_write_MDMA_S0_X_COUNT      bfin_write_MDMA0_S0_X_COUNT
-#define bfin_write_MDMA_D0_Y_COUNT      bfin_write_MDMA0_D0_Y_COUNT
-#define bfin_write_MDMA_S0_Y_COUNT      bfin_write_MDMA0_S0_Y_COUNT
-#define bfin_write_MDMA_D0_X_MODIFY     bfin_write_MDMA0_D0_X_MODIFY
-#define bfin_write_MDMA_S0_X_MODIFY     bfin_write_MDMA0_S0_X_MODIFY
-#define bfin_write_MDMA_D0_Y_MODIFY     bfin_write_MDMA0_D0_Y_MODIFY
-#define bfin_write_MDMA_S0_Y_MODIFY     bfin_write_MDMA0_S0_Y_MODIFY
-#define bfin_write_MDMA_S0_CONFIG       bfin_write_MDMA0_S0_CONFIG
-#define bfin_write_MDMA_D0_CONFIG       bfin_write_MDMA0_D0_CONFIG
-#define bfin_read_MDMA_S0_CONFIG        bfin_read_MDMA0_S0_CONFIG
-#define bfin_read_MDMA_D0_IRQ_STATUS    bfin_read_MDMA0_D0_IRQ_STATUS
-#define bfin_write_MDMA_S0_IRQ_STATUS   bfin_write_MDMA0_S0_IRQ_STATUS
-
-
 /* DPMC*/
 #define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
 #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 241725bc698..99ca3f4305e 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -67,14 +67,14 @@
 #define bfin_write_SIC_ISR0(val)       bfin_write32(SIC_ISR0, val)
 #define bfin_read_SIC_ISR1()           bfin_read32(SIC_ISR1)
 #define bfin_write_SIC_ISR1(val)       bfin_write32(SIC_ISR1, val)
-#define bfin_read_SIC_ISR(x)	       bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
+#define bfin_read_SIC_ISR(x)           bfin_read32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0))
 #define bfin_write_SIC_ISR(x, val)     bfin_write32(SIC_ISR0 + x * (SIC_ISR1 - SIC_ISR0), val)
 #define bfin_read_SIC_IWR0()           bfin_read32(SIC_IWR0)
 #define bfin_write_SIC_IWR0(val)       bfin_write32(SIC_IWR0, val)
 #define bfin_read_SIC_IWR1()           bfin_read32(SIC_IWR1)
 #define bfin_write_SIC_IWR1(val)       bfin_write32(SIC_IWR1, val)
-#define bfin_read_SIC_IWR(x)	       bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
-#define bfin_write_SIC_IWR(x, val)     bfin_write32((SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
+#define bfin_read_SIC_IWR(x)           bfin_read32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0))
+#define bfin_write_SIC_IWR(x, val)     bfin_write32(SIC_IWR0 + x * (SIC_IWR1 - SIC_IWR0), val)
 #define bfin_read_SIC_IAR0()           bfin_read32(SIC_IAR0)
 #define bfin_write_SIC_IAR0(val)       bfin_write32(SIC_IAR0, val)
 #define bfin_read_SIC_IAR1()           bfin_read32(SIC_IAR1)
@@ -1247,6 +1247,65 @@
 #define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT, val)
 #define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT)
 #define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT, val)
+
+#define bfin_read_MDMA_S0_CONFIG()  bfin_read_MDMA0_S0_CONFIG()
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA0_S0_CONFIG(val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()  bfin_read_MDMA0_S0_IRQ_STATUS()
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA0_S0_IRQ_STATUS(val)
+#define bfin_read_MDMA_S0_X_MODIFY()  bfin_read_MDMA0_S0_X_MODIFY()
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA0_S0_X_MODIFY(val)
+#define bfin_read_MDMA_S0_Y_MODIFY()  bfin_read_MDMA0_S0_Y_MODIFY()
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA0_S0_Y_MODIFY(val)
+#define bfin_read_MDMA_S0_X_COUNT()  bfin_read_MDMA0_S0_X_COUNT()
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA0_S0_X_COUNT(val)
+#define bfin_read_MDMA_S0_Y_COUNT()  bfin_read_MDMA0_S0_Y_COUNT()
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA0_S0_Y_COUNT(val)
+#define bfin_read_MDMA_S0_START_ADDR()  bfin_read_MDMA0_S0_START_ADDR()
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA0_S0_START_ADDR(val)
+#define bfin_read_MDMA_D0_CONFIG()  bfin_read_MDMA0_D0_CONFIG()
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA0_D0_CONFIG(val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()  bfin_read_MDMA0_D0_IRQ_STATUS()
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA0_D0_IRQ_STATUS(val)
+#define bfin_read_MDMA_D0_X_MODIFY()  bfin_read_MDMA0_D0_X_MODIFY()
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA0_D0_X_MODIFY(val)
+#define bfin_read_MDMA_D0_Y_MODIFY()  bfin_read_MDMA0_D0_Y_MODIFY()
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA0_D0_Y_MODIFY(val)
+#define bfin_read_MDMA_D0_X_COUNT()  bfin_read_MDMA0_D0_X_COUNT()
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA0_D0_X_COUNT(val)
+#define bfin_read_MDMA_D0_Y_COUNT()  bfin_read_MDMA0_D0_Y_COUNT()
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA0_D0_Y_COUNT(val)
+#define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA0_D0_START_ADDR()
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA0_D0_START_ADDR(val)
+
+#define bfin_read_MDMA_S1_CONFIG()  bfin_read_MDMA0_S1_CONFIG()
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA0_S1_CONFIG(val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()  bfin_read_MDMA0_S1_IRQ_STATUS()
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA0_S1_IRQ_STATUS(val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read_MDMA0_S1_X_MODIFY()
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA0_S1_X_MODIFY(val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read_MDMA0_S1_Y_MODIFY()
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA0_S1_Y_MODIFY(val)
+#define bfin_read_MDMA_S1_X_COUNT()  bfin_read_MDMA0_S1_X_COUNT()
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA0_S1_X_COUNT(val)
+#define bfin_read_MDMA_S1_Y_COUNT()  bfin_read_MDMA0_S1_Y_COUNT()
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA0_S1_Y_COUNT(val)
+#define bfin_read_MDMA_S1_START_ADDR()  bfin_read_MDMA0_S1_START_ADDR()
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA0_S1_START_ADDR(val)
+#define bfin_read_MDMA_D1_CONFIG()  bfin_read_MDMA0_D1_CONFIG()
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA0_D1_CONFIG(val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()  bfin_read_MDMA0_D1_IRQ_STATUS()
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA0_D1_IRQ_STATUS(val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read_MDMA0_D1_X_MODIFY()
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA0_D1_X_MODIFY(val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read_MDMA0_D1_Y_MODIFY()
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA0_D1_Y_MODIFY(val)
+#define bfin_read_MDMA_D1_X_COUNT()  bfin_read_MDMA0_D1_X_COUNT()
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA0_D1_X_COUNT(val)
+#define bfin_read_MDMA_D1_Y_COUNT()  bfin_read_MDMA0_D1_Y_COUNT()
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA0_D1_Y_COUNT(val)
+#define bfin_read_MDMA_D1_START_ADDR()  bfin_read_MDMA0_D1_START_ADDR()
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA0_D1_START_ADDR(val)
+
 #define bfin_read_PPI_CONTROL()        bfin_read16(PPI_CONTROL)
 #define bfin_write_PPI_CONTROL(val)    bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()         bfin_read16(PPI_STATUS)
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 6adbfcc65a3..bdc330cd0e1 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -412,6 +412,62 @@
 #define	MDMA0_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA0 Stream 1 Source Current X Count Register */
 #define	MDMA0_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA0 Stream 1 Source Current Y Count Register */
 
+#define MDMA_D0_NEXT_DESC_PTR MDMA0_D0_NEXT_DESC_PTR
+#define MDMA_D0_START_ADDR MDMA0_D0_START_ADDR
+#define MDMA_D0_CONFIG MDMA0_D0_CONFIG
+#define MDMA_D0_X_COUNT MDMA0_D0_X_COUNT
+#define MDMA_D0_X_MODIFY MDMA0_D0_X_MODIFY
+#define MDMA_D0_Y_COUNT MDMA0_D0_Y_COUNT
+#define MDMA_D0_Y_MODIFY MDMA0_D0_Y_MODIFY
+#define MDMA_D0_CURR_DESC_PTR MDMA0_D0_CURR_DESC_PTR
+#define MDMA_D0_CURR_ADDR MDMA0_D0_CURR_ADDR
+#define MDMA_D0_IRQ_STATUS MDMA0_D0_IRQ_STATUS
+#define MDMA_D0_PERIPHERAL_MAP MDMA0_D0_PERIPHERAL_MAP
+#define MDMA_D0_CURR_X_COUNT MDMA0_D0_CURR_X_COUNT
+#define MDMA_D0_CURR_Y_COUNT MDMA0_D0_CURR_Y_COUNT
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA0_S0_NEXT_DESC_PTR
+#define MDMA_S0_START_ADDR MDMA0_S0_START_ADDR
+#define MDMA_S0_CONFIG MDMA0_S0_CONFIG
+#define MDMA_S0_X_COUNT MDMA0_S0_X_COUNT
+#define MDMA_S0_X_MODIFY MDMA0_S0_X_MODIFY
+#define MDMA_S0_Y_COUNT MDMA0_S0_Y_COUNT
+#define MDMA_S0_Y_MODIFY MDMA0_S0_Y_MODIFY
+#define MDMA_S0_CURR_DESC_PTR MDMA0_S0_CURR_DESC_PTR
+#define MDMA_S0_CURR_ADDR MDMA0_S0_CURR_ADDR
+#define MDMA_S0_IRQ_STATUS MDMA0_S0_IRQ_STATUS
+#define MDMA_S0_PERIPHERAL_MAP MDMA0_S0_PERIPHERAL_MAP
+#define MDMA_S0_CURR_X_COUNT MDMA0_S0_CURR_X_COUNT
+#define MDMA_S0_CURR_Y_COUNT MDMA0_S0_CURR_Y_COUNT
+
+#define MDMA_D1_NEXT_DESC_PTR MDMA0_D1_NEXT_DESC_PTR
+#define MDMA_D1_START_ADDR MDMA0_D1_START_ADDR
+#define MDMA_D1_CONFIG MDMA0_D1_CONFIG
+#define MDMA_D1_X_COUNT MDMA0_D1_X_COUNT
+#define MDMA_D1_X_MODIFY MDMA0_D1_X_MODIFY
+#define MDMA_D1_Y_COUNT MDMA0_D1_Y_COUNT
+#define MDMA_D1_Y_MODIFY MDMA0_D1_Y_MODIFY
+#define MDMA_D1_CURR_DESC_PTR MDMA0_D1_CURR_DESC_PTR
+#define MDMA_D1_CURR_ADDR MDMA0_D1_CURR_ADDR
+#define MDMA_D1_IRQ_STATUS MDMA0_D1_IRQ_STATUS
+#define MDMA_D1_PERIPHERAL_MAP MDMA0_D1_PERIPHERAL_MAP
+#define MDMA_D1_CURR_X_COUNT MDMA0_D1_CURR_X_COUNT
+#define MDMA_D1_CURR_Y_COUNT MDMA0_D1_CURR_Y_COUNT
+
+#define MDMA_S1_NEXT_DESC_PTR MDMA0_S1_NEXT_DESC_PTR
+#define MDMA_S1_START_ADDR MDMA0_S1_START_ADDR
+#define MDMA_S1_CONFIG MDMA0_S1_CONFIG
+#define MDMA_S1_X_COUNT MDMA0_S1_X_COUNT
+#define MDMA_S1_X_MODIFY MDMA0_S1_X_MODIFY
+#define MDMA_S1_Y_COUNT MDMA0_S1_Y_COUNT
+#define MDMA_S1_Y_MODIFY MDMA0_S1_Y_MODIFY
+#define MDMA_S1_CURR_DESC_PTR MDMA0_S1_CURR_DESC_PTR
+#define MDMA_S1_CURR_ADDR MDMA0_S1_CURR_ADDR
+#define MDMA_S1_IRQ_STATUS MDMA0_S1_IRQ_STATUS
+#define MDMA_S1_PERIPHERAL_MAP MDMA0_S1_PERIPHERAL_MAP
+#define MDMA_S1_CURR_X_COUNT MDMA0_S1_CURR_X_COUNT
+#define MDMA_S1_CURR_Y_COUNT MDMA0_S1_CURR_Y_COUNT
+
 
 /* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
 #define	PPI_CONTROL			0xFFC01000	/* PPI Control Register */
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index dcf65715905..a09623dfd55 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -11,6 +11,13 @@ config DEB_DMA_URGENT
 	help
 	  Treat any DEB1, DEB2 and DEB3 request as Urgent
 
+config BF548_ATAPI_ALTERNATIVE_PORT
+	bool "BF548 ATAPI alternative port via GPIO"
+	help
+	  BF548 ATAPI data and address PINs can be routed through
+	  async address or GPIO port F and G. Select y to route it
+	  to GPIO.
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
@@ -250,6 +257,7 @@ config IRQ_OTPSEC
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 096e661700a..add5a17452c 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -208,6 +208,43 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
@@ -628,6 +665,14 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+	.cs_change_per_word = 0,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -653,15 +698,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-{
-	.modalias		= "ad7877",
-	.platform_data		= &bfin_ad7877_ts_info,
-	.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
-	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
-	.bus_num		= 0,
-	.chip_select  		= 2,
-	.controller_data = &spi_ad7877_chip_info,
-},
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PB4,	/* old boards (<=Rev 1.3) use IRQ_PJ11 */
+		.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 0,
+		.chip_select  		= 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
 #endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
@@ -672,8 +717,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+	{
+		.modalias		= "adxl34x",
+		.platform_data		= &adxl34x_info,
+		.irq			= IRQ_PC5,
+		.max_speed_hz		= 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num		= 1,
+		.chip_select  		= 2,
+		.controller_data = &spi_adxl34x_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
 };
-
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
@@ -786,7 +842,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -797,6 +853,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 		.irq = 212,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PC5,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 882e40ccf0d..c510ae688e2 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -6,26 +6,31 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+/* We do not support 0.0 or 0.1 silicon - sorry */
+#if __SILICON_REVISION__ < 2
+# error will not work on BF548 silicon version 0.0, or 0.1
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
@@ -59,7 +64,7 @@
 #define ANOMALY_05000340 (__SILICON_REVISION__ < 1)
 /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
-/* USB Calibration Value Is Not Intialized */
+/* USB Calibration Value Is Not Initialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0x5411
@@ -147,11 +152,11 @@
 #define ANOMALY_05000416 (1)
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
 #define ANOMALY_05000425 (1)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
 #define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
-/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
@@ -170,26 +175,49 @@
 /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
 #define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
 /* USB DMA Mode 1 Short Packet Data Corruption */
-#define ANOMALY_05000450 (1
+#define ANOMALY_05000450 (1)
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index ffb1d0a44b4..ce372ba0f04 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -167,22 +167,42 @@
 #define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
 #define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
 #define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
-#define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
-#define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
-#define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
-#define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
-#define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
-#define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
-#define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
-#define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
-#define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
-#define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
-#define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
-#define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
-#define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
-#define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
-#define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
-#define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+# define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+# define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+# define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+# define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+# define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+# define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+# define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+# define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+# define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+# define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+# define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+# define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+# define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+# define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+# define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#else
+# define P_ATAPI_D0A	(P_DONTCARE)
+# define P_ATAPI_D1A	(P_DONTCARE)
+# define P_ATAPI_D2A	(P_DONTCARE)
+# define P_ATAPI_D3A	(P_DONTCARE)
+# define P_ATAPI_D4A	(P_DONTCARE)
+# define P_ATAPI_D5A	(P_DONTCARE)
+# define P_ATAPI_D6A	(P_DONTCARE)
+# define P_ATAPI_D7A	(P_DONTCARE)
+# define P_ATAPI_D8A	(P_DONTCARE)
+# define P_ATAPI_D9A	(P_DONTCARE)
+# define P_ATAPI_D10A	(P_DONTCARE)
+# define P_ATAPI_D11A	(P_DONTCARE)
+# define P_ATAPI_D12A	(P_DONTCARE)
+# define P_ATAPI_D13A	(P_DONTCARE)
+# define P_ATAPI_D14A	(P_DONTCARE)
+# define P_ATAPI_D15A	(P_DONTCARE)
+#endif
 
 #define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
@@ -200,9 +220,15 @@
 #define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
 #define P_CAN1_TX	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
 #define P_CAN1_RX	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
-#define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
-#define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
-#define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+# define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+# define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#else
+# define P_ATAPI_A0A	(P_DONTCARE)
+# define P_ATAPI_A1A	(P_DONTCARE)
+# define P_ATAPI_A2A	(P_DONTCARE)
+#endif
 #define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
 #define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
 #define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
index 638ec38ca47..cb974364151 100644
--- a/arch/blackfin/mach-bf561/Kconfig
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -9,22 +9,9 @@ if (!SMP)
 comment "Core B Support"
 
 config BF561_COREB
-	bool "Enable Core B support"
+	bool "Enable Core B loader"
 	default y
 
-config BF561_COREB_RESET
-	bool "Enable Core B reset support"
-	default n
-	help
-	  This requires code in the application that is loaded
-	  into Core B. In order to reset, the application needs
-	  to install an interrupt handler for Supplemental
-	  Interrupt 0, that sets RETI to 0xff600000 and writes
-	  bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
-	  This causes Core B to stall when Supplemental Interrupt
-	  0 is set, and will reset PC to 0xff600000 when
-	  COREB_SRAM_INIT is cleared.
-
 endif
 
 comment "Interrupt Priority Assignment"
@@ -138,6 +125,7 @@ config IRQ_DMA2_11
 	default 9
 config IRQ_TIMER0
 	int "TIMER 0  Interrupt"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "TIMER 1  Interrupt"
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index f623c6b0719..0dd9685e5d5 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 8598098c084..93635a766f9 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -1,406 +1,74 @@
-/*
- * File:         arch/blackfin/mach-bf561/coreb.c
- * Based on:
- * Author:
+/* Load firmware into Core B on a BF561
  *
- * Created:
- * Description:  Handle CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The Core B reset func requires code in the application that is loaded into
+ * Core B.  In order to reset, the application needs to install an interrupt
+ * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and
+ * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.  This causes Core
+ * B to stall when Supplemental Interrupt 0 is set, and will reset PC to
+ * 0xff600000 when COREB_SRAM_INIT is cleared.
  */
 
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
 #include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
 #include <linux/fs.h>
-#include <asm/dma.h>
-#include <asm/cacheflush.h>
-
-#define MODULE_VER		"v0.1"
-
-static spinlock_t coreb_lock;
-static wait_queue_head_t coreb_dma_wait;
-
-#define COREB_IS_OPEN		0x00000001
-#define COREB_IS_RUNNING	0x00000010
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
 
-#define CMD_COREB_INDEX		1
 #define CMD_COREB_START		2
 #define CMD_COREB_STOP		3
 #define CMD_COREB_RESET		4
 
-#define COREB_MINOR		229
-
-static unsigned long coreb_status = 0;
-static unsigned long coreb_base = 0xff600000;
-static unsigned long coreb_size = 0x4000;
-int coreb_dma_done;
-
-static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
-static ssize_t coreb_read(struct file *file, char *buf, size_t count,
-			  loff_t * ppos);
-static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
-			   loff_t * ppos);
-static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		       unsigned long arg);
-static int coreb_open(struct inode *inode, struct file *file);
-static int coreb_release(struct inode *inode, struct file *file);
-
-static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
-{
-	clear_dma_irqstat(CH_MEM_STREAM2_DEST);
-	coreb_dma_done = 1;
-	wake_up_interruptible(&coreb_dma_wait);
-	return IRQ_HANDLED;
-}
-
-static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
-			   loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	ssize_t wrote = 0;
-
-	if (p + count > coreb_size)
-		return -EFAULT;
-
-	while (count > 0) {
-		int len = count;
-
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-
-		coreb_dma_done = 0;
-
-		flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
-		/* Source Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
-		set_dma_x_count(CH_MEM_STREAM2_SRC, len);
-		set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_SRC, 0);
-		/* Destination Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
-		set_dma_x_count(CH_MEM_STREAM2_DEST, len);
-		set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
-
-		enable_dma(CH_MEM_STREAM2_SRC);
-		enable_dma(CH_MEM_STREAM2_DEST);
-
-		wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
-
-		disable_dma(CH_MEM_STREAM2_SRC);
-		disable_dma(CH_MEM_STREAM2_DEST);
-
-		count -= len;
-		wrote += len;
-		buf += len;
-		p += len;
-	}
-	*ppos = p;
-	return wrote;
-}
-
-static ssize_t coreb_read(struct file *file, char *buf, size_t count,
-			  loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	ssize_t read = 0;
-
-	if ((p + count) > coreb_size)
-		return -EFAULT;
-
-	while (count > 0) {
-		int len = count;
-
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-
-		coreb_dma_done = 0;
-
-		invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len));
-		/* Source Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
-		set_dma_x_count(CH_MEM_STREAM2_SRC, len);
-		set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_SRC, 0);
-		/* Destination Channel */
-		set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
-		set_dma_x_count(CH_MEM_STREAM2_DEST, len);
-		set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
-		set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
-
-		enable_dma(CH_MEM_STREAM2_SRC);
-		enable_dma(CH_MEM_STREAM2_DEST);
-
-		wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
-
-		disable_dma(CH_MEM_STREAM2_SRC);
-		disable_dma(CH_MEM_STREAM2_DEST);
-
-		count -= len;
-		read += len;
-		buf += len;
-		p += len;
-	}
-
-	return read;
-}
-
-static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
+static int
+coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	loff_t ret;
-
-	mutex_lock(&file->f_dentry->d_inode->i_mutex);
-
-	switch (origin) {
-	case 0 /* SEEK_SET */ :
-		if (offset < coreb_size) {
-			file->f_pos = offset;
-			ret = file->f_pos;
-		} else
-			ret = -EINVAL;
-		break;
-	case 1 /* SEEK_CUR */ :
-		if ((offset + file->f_pos) < coreb_size) {
-			file->f_pos += offset;
-			ret = file->f_pos;
-		} else
-			ret = -EINVAL;
-	default:
-		ret = -EINVAL;
-	}
-	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-	return ret;
-}
-
-/* No BKL needed here */
-static int coreb_open(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&coreb_lock);
-
-	if (coreb_status & COREB_IS_OPEN)
-		goto out_busy;
-
-	coreb_status |= COREB_IS_OPEN;
-
-	spin_unlock_irq(&coreb_lock);
-	return 0;
-
- out_busy:
-	spin_unlock_irq(&coreb_lock);
-	return -EBUSY;
-}
-
-static int coreb_release(struct inode *inode, struct file *file)
-{
-	spin_lock_irq(&coreb_lock);
-	coreb_status &= ~COREB_IS_OPEN;
-	spin_unlock_irq(&coreb_lock);
-	return 0;
-}
-
-static int coreb_ioctl(struct inode *inode, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	int retval = 0;
-	int coreb_index = 0;
+	int ret = 0;
 
 	switch (cmd) {
-	case CMD_COREB_INDEX:
-		if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
-			retval = -EFAULT;
-			break;
-		}
-
-		spin_lock_irq(&coreb_lock);
-		switch (coreb_index) {
-		case 0:
-			coreb_base = 0xff600000;
-			coreb_size = 0x4000;
-			break;
-		case 1:
-			coreb_base = 0xff610000;
-			coreb_size = 0x4000;
-			break;
-		case 2:
-			coreb_base = 0xff500000;
-			coreb_size = 0x8000;
-			break;
-		case 3:
-			coreb_base = 0xff400000;
-			coreb_size = 0x8000;
-			break;
-		default:
-			retval = -EINVAL;
-			break;
-		}
-		spin_unlock_irq(&coreb_lock);
-
-		mutex_lock(&file->f_dentry->d_inode->i_mutex);
-		file->f_pos = 0;
-		mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-		break;
 	case CMD_COREB_START:
-		spin_lock_irq(&coreb_lock);
-		if (coreb_status & COREB_IS_RUNNING) {
-			retval = -EBUSY;
-			break;
-		}
-		printk(KERN_INFO "Starting Core B\n");
-		coreb_status |= COREB_IS_RUNNING;
 		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
-		SSYNC();
-		spin_unlock_irq(&coreb_lock);
 		break;
-#if defined(CONFIG_BF561_COREB_RESET)
 	case CMD_COREB_STOP:
-		spin_lock_irq(&coreb_lock);
-		printk(KERN_INFO "Stopping Core B\n");
 		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
-		coreb_status &= ~COREB_IS_RUNNING;
-		spin_unlock_irq(&coreb_lock);
 		break;
 	case CMD_COREB_RESET:
-		printk(KERN_INFO "Resetting Core B\n");
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
 		break;
-#endif
+	default:
+		ret = -EINVAL;
+		break;
 	}
 
-	return retval;
+	CSYNC();
+
+	return ret;
 }
 
 static struct file_operations coreb_fops = {
-	.owner = THIS_MODULE,
-	.llseek = coreb_lseek,
-	.read = coreb_read,
-	.write = coreb_write,
-	.ioctl = coreb_ioctl,
-	.open = coreb_open,
-	.release = coreb_release
+	.owner   = THIS_MODULE,
+	.ioctl   = coreb_ioctl,
 };
 
 static struct miscdevice coreb_dev = {
-	COREB_MINOR,
-	"coreb",
-	&coreb_fops
+	.minor = MISC_DYNAMIC_MINOR,
+	.name  = "coreb",
+	.fops  = &coreb_fops,
 };
 
-static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
+static int __init bf561_coreb_init(void)
 {
-	return sprintf(buf,
-		       "Base Address:\t0x%08lx\n"
-		       "Core B is %s\n"
-		       "SICA_SYSCR:\t%04x\n"
-		       "SICB_SYSCR:\t%04x\n"
-		       "\n"
-		       "IRQ Status:\tCore A\t\tCore B\n"
-		       "ISR0:\t\t%08x\t\t%08x\n"
-		       "ISR1:\t\t%08x\t\t%08x\n"
-		       "IMASK0:\t\t%08x\t\t%08x\n"
-		       "IMASK1:\t\t%08x\t\t%08x\n",
-		       coreb_base,
-		       coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
-		       bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
-		       bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
-		       bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
-		       bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
-		       bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
-}
-
-static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
-
-int __init bf561_coreb_init(void)
-{
-	init_waitqueue_head(&coreb_dma_wait);
-
-	spin_lock_init(&coreb_lock);
-	/* Request the core memory regions for Core B */
-	if (request_mem_region(0xff600000, 0x4000,
-			       "Core B - Instruction SRAM") == NULL)
-		goto exit;
-
-	if (request_mem_region(0xFF610000, 0x4000,
-			       "Core B - Instruction SRAM") == NULL)
-		goto release_instruction_a_sram;
-
-	if (request_mem_region(0xFF500000, 0x8000,
-			       "Core B - Data Bank B SRAM") == NULL)
-		goto release_instruction_b_sram;
-
-	if (request_mem_region(0xff400000, 0x8000,
-			       "Core B - Data Bank A SRAM") == NULL)
-		goto release_data_b_sram;
-
-	if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
-		goto release_data_a_sram;
-
-	if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
-		goto release_dma_dest;
-
-	set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
-
-	misc_register(&coreb_dev);
-
-	if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
-		goto release_dma_src;
-
-	printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
-	return 0;
-
- release_dma_src:
-	free_dma(CH_MEM_STREAM2_SRC);
- release_dma_dest:
-	free_dma(CH_MEM_STREAM2_DEST);
- release_data_a_sram:
-	release_mem_region(0xff400000, 0x8000);
- release_data_b_sram:
-	release_mem_region(0xff500000, 0x8000);
- release_instruction_b_sram:
-	release_mem_region(0xff610000, 0x4000);
- release_instruction_a_sram:
-	release_mem_region(0xff600000, 0x4000);
- exit:
-	return -ENOMEM;
+	return misc_register(&coreb_dev);
 }
+module_init(bf561_coreb_init);
 
-void __exit bf561_coreb_exit(void)
+static void __exit bf561_coreb_exit(void)
 {
-	device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
 	misc_deregister(&coreb_dev);
-
-	release_mem_region(0xff610000, 0x4000);
-	release_mem_region(0xff600000, 0x4000);
-	release_mem_region(0xff500000, 0x8000);
-	release_mem_region(0xff400000, 0x8000);
-
-	free_dma(CH_MEM_STREAM2_DEST);
-	free_dma(CH_MEM_STREAM2_SRC);
 }
-
-module_init(bf561_coreb_init);
 module_exit(bf561_coreb_exit);
 
 MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index d0b0b350644..dccd396cd93 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List
  */
 
@@ -18,11 +18,11 @@
 # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
 #endif
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
 #define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
-/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
 #define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
 /* Testset instructions restricted to 32-bit aligned memory locations */
 #define ANOMALY_05000120 (1)
@@ -40,7 +40,7 @@
 #define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
 /* Allowing the SPORT RX FIFO to fill will cause an overflow */
 #define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
 #define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
 /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
 #define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -80,7 +80,7 @@
 #define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
 /* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
 #define ANOMALY_05000166 (1)
-/* Turning Serial Ports on with External Frame Syncs */
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
 #define ANOMALY_05000167 (1)
 /* SDRAM auto-refresh and subsequent Power Ups */
 #define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
@@ -164,7 +164,7 @@
 #define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
 /* TESTSET operation forces stall on the other core */
 #define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
@@ -208,7 +208,7 @@
 #define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
 /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
 #define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
@@ -232,7 +232,7 @@
 #define ANOMALY_05000310 (1)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI Is Level-Sensitive on First Transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (1)
@@ -276,18 +276,27 @@
 #define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000119 (0)
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000233 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index 95d609f11c9..9d9858c2be6 100644
--- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -1526,6 +1526,35 @@
 #define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA1_D0_START_ADDR()
 #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val)
 
+#define bfin_read_MDMA_S1_CONFIG()  bfin_read_MDMA1_S1_CONFIG()
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write_MDMA1_S1_CONFIG(val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()  bfin_read_MDMA1_S1_IRQ_STATUS()
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write_MDMA1_S1_IRQ_STATUS(val)
+#define bfin_read_MDMA_S1_X_MODIFY()  bfin_read_MDMA1_S1_X_MODIFY()
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write_MDMA1_S1_X_MODIFY(val)
+#define bfin_read_MDMA_S1_Y_MODIFY()  bfin_read_MDMA1_S1_Y_MODIFY()
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write_MDMA1_S1_Y_MODIFY(val)
+#define bfin_read_MDMA_S1_X_COUNT()  bfin_read_MDMA1_S1_X_COUNT()
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write_MDMA1_S1_X_COUNT(val)
+#define bfin_read_MDMA_S1_Y_COUNT()  bfin_read_MDMA1_S1_Y_COUNT()
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write_MDMA1_S1_Y_COUNT(val)
+#define bfin_read_MDMA_S1_START_ADDR()  bfin_read_MDMA1_S1_START_ADDR()
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write_MDMA1_S1_START_ADDR(val)
+#define bfin_read_MDMA_D1_CONFIG()  bfin_read_MDMA1_D1_CONFIG()
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write_MDMA1_D1_CONFIG(val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()  bfin_read_MDMA1_D1_IRQ_STATUS()
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write_MDMA1_D1_IRQ_STATUS(val)
+#define bfin_read_MDMA_D1_X_MODIFY()  bfin_read_MDMA1_D1_X_MODIFY()
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write_MDMA1_D1_X_MODIFY(val)
+#define bfin_read_MDMA_D1_Y_MODIFY()  bfin_read_MDMA1_D1_Y_MODIFY()
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write_MDMA1_D1_Y_MODIFY(val)
+#define bfin_read_MDMA_D1_X_COUNT()  bfin_read_MDMA1_D1_X_COUNT()
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write_MDMA1_D1_X_COUNT(val)
+#define bfin_read_MDMA_D1_Y_COUNT()  bfin_read_MDMA1_D1_Y_COUNT()
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write_MDMA1_D1_Y_COUNT(val)
+#define bfin_read_MDMA_D1_START_ADDR()  bfin_read_MDMA1_D1_START_ADDR()
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write_MDMA1_D1_START_ADDR(val)
+
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index cf922295f4c..5fc0f05026e 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -796,6 +796,62 @@
 #define MDMA2_S1_IRQ_STATUS 0xFFC00FE8	/*MemDMA2 Stream 1 Source Interrupt/Status Register */
 #define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC	/*MemDMA2 Stream 1 Source Peripheral Map register */
 
+#define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR
+#define MDMA_D0_START_ADDR MDMA1_D0_START_ADDR
+#define MDMA_D0_CONFIG MDMA1_D0_CONFIG
+#define MDMA_D0_X_COUNT MDMA1_D0_X_COUNT
+#define MDMA_D0_X_MODIFY MDMA1_D0_X_MODIFY
+#define MDMA_D0_Y_COUNT MDMA1_D0_Y_COUNT
+#define MDMA_D0_Y_MODIFY MDMA1_D0_Y_MODIFY
+#define MDMA_D0_CURR_DESC_PTR MDMA1_D0_CURR_DESC_PTR
+#define MDMA_D0_CURR_ADDR MDMA1_D0_CURR_ADDR
+#define MDMA_D0_IRQ_STATUS MDMA1_D0_IRQ_STATUS
+#define MDMA_D0_PERIPHERAL_MAP MDMA1_D0_PERIPHERAL_MAP
+#define MDMA_D0_CURR_X_COUNT MDMA1_D0_CURR_X_COUNT
+#define MDMA_D0_CURR_Y_COUNT MDMA1_D0_CURR_Y_COUNT
+
+#define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR
+#define MDMA_S0_START_ADDR MDMA1_S0_START_ADDR
+#define MDMA_S0_CONFIG MDMA1_S0_CONFIG
+#define MDMA_S0_X_COUNT MDMA1_S0_X_COUNT
+#define MDMA_S0_X_MODIFY MDMA1_S0_X_MODIFY
+#define MDMA_S0_Y_COUNT MDMA1_S0_Y_COUNT
+#define MDMA_S0_Y_MODIFY MDMA1_S0_Y_MODIFY
+#define MDMA_S0_CURR_DESC_PTR MDMA1_S0_CURR_DESC_PTR
+#define MDMA_S0_CURR_ADDR MDMA1_S0_CURR_ADDR
+#define MDMA_S0_IRQ_STATUS MDMA1_S0_IRQ_STATUS
+#define MDMA_S0_PERIPHERAL_MAP MDMA1_S0_PERIPHERAL_MAP
+#define MDMA_S0_CURR_X_COUNT MDMA1_S0_CURR_X_COUNT
+#define MDMA_S0_CURR_Y_COUNT MDMA1_S0_CURR_Y_COUNT
+
+#define MDMA_D1_NEXT_DESC_PTR MDMA1_D1_NEXT_DESC_PTR
+#define MDMA_D1_START_ADDR MDMA1_D1_START_ADDR
+#define MDMA_D1_CONFIG MDMA1_D1_CONFIG
+#define MDMA_D1_X_COUNT MDMA1_D1_X_COUNT
+#define MDMA_D1_X_MODIFY MDMA1_D1_X_MODIFY
+#define MDMA_D1_Y_COUNT MDMA1_D1_Y_COUNT
+#define MDMA_D1_Y_MODIFY MDMA1_D1_Y_MODIFY
+#define MDMA_D1_CURR_DESC_PTR MDMA1_D1_CURR_DESC_PTR
+#define MDMA_D1_CURR_ADDR MDMA1_D1_CURR_ADDR
+#define MDMA_D1_IRQ_STATUS MDMA1_D1_IRQ_STATUS
+#define MDMA_D1_PERIPHERAL_MAP MDMA1_D1_PERIPHERAL_MAP
+#define MDMA_D1_CURR_X_COUNT MDMA1_D1_CURR_X_COUNT
+#define MDMA_D1_CURR_Y_COUNT MDMA1_D1_CURR_Y_COUNT
+
+#define MDMA_S1_NEXT_DESC_PTR MDMA1_S1_NEXT_DESC_PTR
+#define MDMA_S1_START_ADDR MDMA1_S1_START_ADDR
+#define MDMA_S1_CONFIG MDMA1_S1_CONFIG
+#define MDMA_S1_X_COUNT MDMA1_S1_X_COUNT
+#define MDMA_S1_X_MODIFY MDMA1_S1_X_MODIFY
+#define MDMA_S1_Y_COUNT MDMA1_S1_Y_COUNT
+#define MDMA_S1_Y_MODIFY MDMA1_S1_Y_MODIFY
+#define MDMA_S1_CURR_DESC_PTR MDMA1_S1_CURR_DESC_PTR
+#define MDMA_S1_CURR_ADDR MDMA1_S1_CURR_ADDR
+#define MDMA_S1_IRQ_STATUS MDMA1_S1_IRQ_STATUS
+#define MDMA_S1_PERIPHERAL_MAP MDMA1_S1_PERIPHERAL_MAP
+#define MDMA_S1_CURR_X_COUNT MDMA1_S1_CURR_X_COUNT
+#define MDMA_S1_CURR_Y_COUNT MDMA1_S1_CURR_Y_COUNT
+
 /* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
 #define IMDMA_D0_CONFIG 0xFFC01808	/*IMDMA Stream 0 Destination Configuration */
 #define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800	/*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 9b27e698c0b..8c10701c251 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -133,9 +133,9 @@ void __init platform_request_ipi(irq_handler_t handler)
 	int ret;
 
 	ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED,
-			  "SMP interrupt", handler);
+			  "Supplemental Interrupt0", handler);
 	if (ret)
-		panic("Cannot request supplemental interrupt 0 for IPI service\n");
+		panic("Cannot request supplemental interrupt 0 for IPI service");
 }
 
 void platform_send_ipi(cpumask_t callmap)
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 80d39b2f9db..da93d920716 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -71,3 +71,10 @@
 #if ANOMALY_05000448
 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
 #endif
+
+/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
+#if ANOMALY_05000220 && \
+	((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
+	 (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
+# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index aa0648c6a9f..d9666fe6c3d 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -15,6 +15,13 @@
 
 .text
 
+/* 05000443 - IFLUSH cannot be last instruction in hardware loop */
+#if ANOMALY_05000443
+# define BROK_FLUSH_INST "IFLUSH"
+#else
+# define BROK_FLUSH_INST "no anomaly! yeah!"
+#endif
+
 /* Since all L1 caches work the same way, we use the same method for flushing
  * them.  Only the actual flush instruction differs.  We write this in asm as
  * GCC can be hard to coax into writing nice hardware loops.
@@ -23,7 +30,7 @@
  * R0 = start address
  * R1 = end address
  */
-.macro do_flush flushins:req optflushins optnopins label
+.macro do_flush flushins:req label
 
 	R2 = -L1_CACHE_BYTES;
 
@@ -44,22 +51,15 @@
 \label :
 .endif
 	P0 = R0;
+
 	LSETUP (1f, 2f) LC1 = P1;
 1:
-.ifnb \optflushins
-	\optflushins [P0];
-.endif
-#if ANOMALY_05000443
-.ifb \optnopins
-2:
-.endif
+.ifeqs "\flushins", BROK_FLUSH_INST
 	\flushins [P0++];
-.ifnb \optnopins
-2:	\optnopins;
-.endif
-#else
+2:	nop;
+.else
 2:	\flushins [P0++];
-#endif
+.endif
 
 	RTS;
 .endm
@@ -77,25 +77,9 @@ ENTRY(_blackfin_icache_flush_range)
  */
 	P0 = R0;
 	IFLUSH[P0];
-	do_flush IFLUSH, , nop
+	do_flush IFLUSH
 ENDPROC(_blackfin_icache_flush_range)
 
-/* Flush all cache lines assocoiated with this area of memory. */
-ENTRY(_blackfin_icache_dcache_flush_range)
-/*
- * Walkaround to avoid loading wrong instruction after invalidating icache
- * and following sequence is met.
- *
- * 1) One instruction address is cached in the instruction cache.
- * 2) This instruction in SDRAM is changed.
- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
- * 4) This instruction is executed again, but the old one is loaded.
- */
-	P0 = R0;
-	IFLUSH[P0];
-	do_flush FLUSH, IFLUSH
-ENDPROC(_blackfin_icache_dcache_flush_range)
-
 /* Throw away all D-cached data in specified region without any obligation to
  * write them back.  Since the Blackfin ISA does not have an "invalidate"
  * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
@@ -107,7 +91,7 @@ ENDPROC(_blackfin_dcache_invalidate_range)
 
 /* Flush all data cache lines assocoiated with this memory area */
 ENTRY(_blackfin_dcache_flush_range)
-	do_flush FLUSH, , , .Ldfr
+	do_flush FLUSH, .Ldfr
 ENDPROC(_blackfin_dcache_flush_range)
 
 /* Our headers convert the page structure to an address, so just need to flush
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 35393651359..ef6870e9eea 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -72,6 +72,7 @@ void init_clocks(void)
 #endif
 	bfin_write_PLL_LOCKCNT(0x300);
 	do_sync();
+	/* We always write PLL_CTL thus avoiding Anomaly 05000242 */
 	bfin_write16(PLL_CTL, PLL_CTL_VAL);
 	__asm__ __volatile__("IDLE;");
 	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 72e16605ca0..70e3411f558 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -140,7 +140,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 	cclk = get_cclk() / 1000;
 	sclk = get_sclk() / 1000;
 
-#if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
 	min_cclk = sclk * 2;
 #else
 	min_cclk = sclk;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 21e65a339a2..da0558ad1b1 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -36,7 +36,6 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/unistd.h>
-#include <linux/threads.h>
 #include <asm/blackfin.h>
 #include <asm/errno.h>
 #include <asm/fixed_code.h>
@@ -201,7 +200,18 @@ ENTRY(_ex_single_step)
 	cc = r7 == 0;
 	if !cc jump 1f;
 #endif
-
+#ifdef CONFIG_EXACT_HWERR
+	/* Read the ILAT, and to check to see if the process we are
+	 * single stepping caused a previous hardware error
+	 * If so, do not single step, (which lowers to IRQ5, and makes
+	 * us miss the error).
+	 */
+	p5.l = lo(ILAT);
+	p5.h = hi(ILAT);
+	r7 = [p5];
+	cc = bittst(r7, EVT_IVHW_P);
+	if cc jump 1f;
+#endif
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
@@ -263,15 +273,6 @@ ENTRY(_bfin_return_from_exception)
 	r6 = 0x25;
 	CC = R7 == R6;
 	if CC JUMP _double_fault;
-
-	/* Did we cause a HW error? */
-	p5.l = lo(ILAT);
-	p5.h = hi(ILAT);
-	r6 = [p5];
-	r7 = 0x20;		/* Did I just cause anther HW error? */
-	r6 = r7 & r6;
-	CC = R7 == R6;
-	if CC JUMP _double_fault;
 #endif
 
 	(R7:6,P5:4) = [sp++];
@@ -473,6 +474,16 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
 
+#ifdef CONFIG_EXACT_HWERR
+	/* Make sure all pending read/writes complete. This will ensure any
+	 * accesses which could cause hardware errors completes, and signal
+	 * the the hardware before we do something silly, like crash the
+	 * kernel. We don't need to work around anomaly 05000312, since
+	 * we are already atomic
+	 */
+	ssync;
+#endif
+
 #if ANOMALY_05000283 || ANOMALY_05000315
 	cc = r7 == r7;
 	p5.h = HI(CHIPID);
@@ -855,7 +866,7 @@ ENTRY(_ret_from_exception)
 	p1.h = _schedule_and_signal;
 	[p0] = p1;
 	csync;
-	raise 15;		/* raise evt14 to do signal or reschedule */
+	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
 	bitclr(r0, 0);
@@ -916,7 +927,7 @@ ENTRY(_return_from_int)
 	p1.h = _schedule_and_signal_from_int;
 	[p0] = p1;
 	csync;
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
 	r0.l = lo(SAFE_USER_INSTRUCTION);
 	r0.h = hi(SAFE_USER_INSTRUCTION);
 	reti = r0;
@@ -930,18 +941,27 @@ ENTRY(_return_from_int)
 ENDPROC(_return_from_int)
 
 ENTRY(_lower_to_irq14)
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
 	r0.l = lo(SAFE_USER_INSTRUCTION);
 	r0.h = hi(SAFE_USER_INSTRUCTION);
 	reti = r0;
 #endif
-	r0 = 0x401f;
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */
+	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt14_softirq */
+	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
 	sti r0;
 	raise 14;
 	rti;
+ENDPROC(_lower_to_irq14)
+
 ENTRY(_evt14_softirq)
 #ifdef CONFIG_DEBUG_HWERR
-	r0 = 0x3f;
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 	sti r0;
 #else
 	cli r0;
@@ -949,8 +969,9 @@ ENTRY(_evt14_softirq)
 	[--sp] = RETI;
 	SP += 4;
 	rts;
+ENDPROC(_evt14_softirq)
 
-_schedule_and_signal_from_int:
+ENTRY(_schedule_and_signal_from_int)
 	/* To end up here, vector 15 was changed - so we have to change it
 	 * back.
 	 */
@@ -983,8 +1004,9 @@ _schedule_and_signal_from_int:
 	call _finish_atomic_sections;
 	sp += 12;
 	jump.s .Lresume_userspace;
+ENDPROC(_schedule_and_signal_from_int)
 
-_schedule_and_signal:
+ENTRY(_schedule_and_signal)
 	SAVE_CONTEXT_SYSCALL
 	/* To end up here, vector 15 was changed - so we have to change it
 	 * back.
@@ -1002,7 +1024,7 @@ _schedule_and_signal:
 1:
 	RESTORE_CONTEXT
 	rti;
-ENDPROC(_lower_to_irq14)
+ENDPROC(_schedule_and_signal)
 
 /* We handle this 100% in exception space - to reduce overhead
  * Only potiential problem is if the software buffer gets swapped out of the
@@ -1581,24 +1603,10 @@ ENTRY(_sys_call_table)
 	.long _sys_dup3
 	.long _sys_pipe2
 	.long _sys_inotify_init1	/* 365 */
+	.long _sys_preadv
+	.long _sys_pwritev
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
 	.endr
 END(_sys_call_table)
-
-#ifdef CONFIG_EXCEPTION_L1_SCRATCH
-/* .section .l1.bss.scratch */
-.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH
-#else
-#ifdef CONFIG_SYSCALL_TAB_L1
-.section .l1.bss
-#else
-.bss
-#endif
-ENTRY(_exception_stack)
-	.rept 1024 * NR_CPUS
-	.long 0
-	.endr
-_exception_stack_top:
-#endif
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 698d4c05947..f826f6b9f91 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -30,8 +30,6 @@ ENTRY(__init_clear_bss)
 	rts;
 ENDPROC(__init_clear_bss)
 
-#define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
-
 ENTRY(__start)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
@@ -126,30 +124,30 @@ ENTRY(__start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r7 = [p0 + PDA_RETX];
+	r6 = [p0 + PDA_RETX];
 	p1.l = _init_saved_retx;
 	p1.h = _init_saved_retx;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_DCPLB];
+	r6 = [p0 + PDA_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr;
 	p1.h = _init_saved_dcplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_ICPLB];
+	r6 = [p0 + PDA_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr;
 	p1.h = _init_saved_icplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_SEQSTAT];
+	r6 = [p0 + PDA_SEQSTAT];
 	p1.l = _init_saved_seqstat;
 	p1.h = _init_saved_seqstat;
-	[p1] = r7;
+	[p1] = r6;
 #endif
 
 	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
+	sp.l = _init_thread_union;
+	sp.h = _init_thread_union;
 	fp = sp;
 	usp = sp;
 
@@ -189,7 +187,15 @@ ENTRY(__start)
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
+	/* Only use on-chip scratch space for stack when absolutely required
+	 * to avoid Anomaly 05000227 ... we know the init_clocks() func only
+	 * uses L1 text and stack space and no other memory region.
+	 */
+# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+	sp.l = lo(KERNEL_CLOCK_STACK);
+	sp.h = hi(KERNEL_CLOCK_STACK);
 	call _init_clocks;
+	sp = usp;	/* usp hasnt been touched, so restore from there */
 #endif
 
 	/* This section keeps the processor in supervisor mode
@@ -243,9 +249,7 @@ ENTRY(_real_start)
 	call _cmdline_init;
 
 	/* Load the current thread pointer and stack */
-	sp.l = _init_thread_union;
-	sp.h = _init_thread_union;
-	p1 = THREAD_SIZE (z);
+	p1 = THREAD_SIZE + 4 (z);	/* +4 is for reti loading */
 	sp = sp + p1;
 	usp = sp;
 	fp = sp;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 0069c2dd462..9c46680186e 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -145,6 +145,14 @@ __common_int_entry:
 
 /* interrupt routine for ivhw - 5 */
 ENTRY(_evt_ivhw)
+	/* In case a single action kicks off multiple memory transactions, (like
+	 * a cache line fetch, - this can cause multiple hardware errors, let's
+	 * catch them all. First - make sure all the actions are complete, and
+	 * the core sees the hardware errors.
+	 */
+	SSYNC;
+	SSYNC;
+
 	SAVE_ALL_SYS
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
@@ -159,6 +167,25 @@ ENTRY(_evt_ivhw)
 1:
 #endif
 
+	/* Handle all stacked hardware errors
+	 * To make sure we don't hang forever, only do it 10 times
+	 */
+	R0 = 0;
+	R2 = 10;
+1:
+	P0.L = LO(ILAT);
+	P0.H = HI(ILAT);
+	R1 = [P0];
+	CC = BITTST(R1, EVT_IVHW_P);
+	IF ! CC JUMP 2f;
+	/* OK a hardware error is pending - clear it */
+	R1 = EVT_IVHW_P;
+	[P0] = R1;
+	R0 += 1;
+	CC = R1 == R2;
+	if CC JUMP 2f;
+	JUMP 1b;
+2:
 	# We are going to dump something out, so make sure we print IPEND properly
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index a7d7b2dd405..351afd0e36d 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1052,7 +1052,7 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
@@ -1116,6 +1116,9 @@ int __init init_arch_irq(void)
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
+	/* This implicitly covers ANOMALY_05000171
+	 * Boot-ROM code modifies SICA_IWRx wakeup registers
+	 */
 #ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
 # ifdef SIC_IWR1
@@ -1136,13 +1139,6 @@ int __init init_arch_irq(void)
 	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
-#ifdef CONFIG_IPIPE
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct irq_desc *desc = irq_to_desc(irq);
-		desc->ic_prio = __ipipe_get_irq_priority(irq);
-	}
-#endif /* CONFIG_IPIPE */
-
 	return 0;
 }
 
@@ -1156,23 +1152,22 @@ void do_irq(int vec, struct pt_regs *fp)
 	} else {
 		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
 		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
-	|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+#if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
 		if (smp_processor_id()) {
-#ifdef CONFIG_SMP
+# ifdef SICB_ISR0
 			/* This will be optimized out in UP mode. */
 			sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0();
 			sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1();
-#endif
+# endif
 		} else {
 			sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 			sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
 		}
-#ifdef CONFIG_BF54x
+# ifdef SIC_ISR2
 		sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
+# endif
 		for (;; ivg++) {
 			if (ivg >= ivg_stop) {
 				atomic_inc(&num_spurious);
@@ -1236,20 +1231,16 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 
 	if (likely(vec == EVT_IVTMR_P)) {
 		irq = IRQ_CORETMR;
-		goto core_tick;
-	}
 
-	SSYNC();
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
-	{
+	} else {
+#if defined(SIC_ISR0) || defined(SICA_ISR0)
 		unsigned long sic_status[3];
 
 		sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 		sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
-#ifdef CONFIG_BF54x
+# ifdef SIC_ISR2
 		sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
+# endif
 		for (;; ivg++) {
 			if (ivg >= ivg_stop) {
 				atomic_inc(&num_spurious);
@@ -1258,9 +1249,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 			if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
 				break;
 		}
-	}
 #else
-	{
 		unsigned long sic_status;
 
 		sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
@@ -1272,15 +1261,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 			} else if (sic_status & ivg->isrflag)
 				break;
 		}
-	}
 #endif
 
-	irq = ivg->irqno;
+		irq = ivg->irqno;
+	}
 
 	if (irq == IRQ_SYSTMR) {
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#else
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
 #endif
 		/* This is basically what we need from the register frame. */
@@ -1292,9 +1279,6 @@ core_tick:
 			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
 	}
 
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-core_tick:
-#endif
 	if (this_domain == ipipe_root_domain) {
 		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
 		barrier();
@@ -1312,7 +1296,7 @@ core_tick:
 		}
 	}
 
-       return 0;
+	return 0;
 }
 
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 93eab614607..3b8ebaee77f 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -43,8 +43,13 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/cpu.h>
+#include <asm/time.h>
 #include <linux/err.h>
 
+/*
+ * Anomaly notes:
+ * 05000120 - we always define corelock as 32-bit integer in L2
+ */
 struct corelock_slot corelock __attribute__ ((__section__(".l2.bss")));
 
 void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb,
@@ -352,7 +357,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 static void __cpuinit setup_secondary(unsigned int cpu)
 {
-#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE))
+#if !defined(CONFIG_TICKSOURCE_GPTMR0)
 	struct irq_desc *timer_desc;
 #endif
 	unsigned long ilat;
@@ -364,16 +369,13 @@ static void __cpuinit setup_secondary(unsigned int cpu)
 	bfin_write_ILAT(ilat);
 	CSYNC();
 
-	/* Reserve the PDA space for the secondary CPU. */
-	reserve_pda();
-
 	/* Enable interrupt levels IVG7-15. IARs have been already
 	 * programmed by the boot CPU.  */
 	bfin_irq_flags |= IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
-#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
 	/* Power down the core timer, just to play safe. */
 	bfin_write_TCNTL(0);
 
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 8cb0945563f..bc0062884fd 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,7 +30,6 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 9c3629b9a68..014a55abd09 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -52,9 +52,14 @@ static unsigned long empty_bad_page_table;
 
 static unsigned long empty_bad_page;
 
-unsigned long empty_zero_page;
+static unsigned long empty_zero_page;
 
-extern unsigned long exception_stack[NR_CPUS][1024];
+#ifndef CONFIG_EXCEPTION_L1_SCRATCH
+#if defined CONFIG_SYSCALL_TAB_L1
+__attribute__((l1_data))
+#endif
+static unsigned long exception_stack[NR_CPUS][1024];
+#endif
 
 struct blackfin_pda cpu_pda[NR_CPUS];
 EXPORT_SYMBOL(cpu_pda);
@@ -117,19 +122,18 @@ asmlinkage void __init init_pda(void)
 	cpu_pda[0].next = &cpu_pda[1];
 	cpu_pda[1].next = &cpu_pda[0];
 
+#ifdef CONFIG_EXCEPTION_L1_SCRATCH
+	cpu_pda[cpu].ex_stack = (unsigned long *)(L1_SCRATCH_START + \
+					L1_SCRATCH_LENGTH);
+#else
 	cpu_pda[cpu].ex_stack = exception_stack[cpu + 1];
+#endif
 
 #ifdef CONFIG_SMP
 	cpu_pda[cpu].imask = 0x1f;
 #endif
 }
 
-void __cpuinit reserve_pda(void)
-{
-	printk(KERN_INFO "PDA for CPU%u reserved at %p\n", smp_processor_id(),
-					&cpu_pda[smp_processor_id()]);
-}
-
 void __init mem_init(void)
 {
 	unsigned int codek = 0, datak = 0, initk = 0;
@@ -171,19 +175,6 @@ void __init mem_init(void)
 		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
 }
 
-static int __init sram_init(void)
-{
-	/* Initialize the blackfin L1 Memory. */
-	bfin_sram_init();
-
-	/* Reserve the PDA space for the boot CPU right after we
-	 * initialized the scratch memory allocator.
-	 */
-	reserve_pda();
-	return 0;
-}
-pure_initcall(sram_init);
-
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
 	unsigned long addr;
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index 22913e7a181..c080e70f98b 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -125,7 +125,7 @@ static bool isram_check_addr(const void *addr, size_t n)
 {
 	if ((addr >= (void *)L1_CODE_START) &&
 	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
-		if ((addr + n) >= (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+		if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
 			show_stack(NULL, NULL);
 			printk(KERN_ERR "isram_memcpy: copy involving %p length "
 					"(%zu) too long\n", addr, n);
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 530d1393a23..0bc3c4ef0aa 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -83,6 +83,14 @@ static struct kmem_cache *sram_piece_cache;
 static void __init l1sram_init(void)
 {
 	unsigned int cpu;
+	unsigned long reserve;
+
+#ifdef CONFIG_SMP
+	reserve = 0;
+#else
+	reserve = sizeof(struct l1_scratch_task_info);
+#endif
+
 	for (cpu = 0; cpu < num_possible_cpus(); ++cpu) {
 		per_cpu(free_l1_ssram_head, cpu).next =
 			kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
@@ -91,8 +99,8 @@ static void __init l1sram_init(void)
 			return;
 		}
 
-		per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu);
-		per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH;
+		per_cpu(free_l1_ssram_head, cpu).next->paddr = (void *)get_l1_scratch_start_cpu(cpu) + reserve;
+		per_cpu(free_l1_ssram_head, cpu).next->size = L1_SCRATCH_LENGTH - reserve;
 		per_cpu(free_l1_ssram_head, cpu).next->pid = 0;
 		per_cpu(free_l1_ssram_head, cpu).next->next = NULL;
 
@@ -223,7 +231,7 @@ static void __init l2_sram_init(void)
 	spin_lock_init(&l2_sram_lock);
 }
 
-void __init bfin_sram_init(void)
+static int __init bfin_sram_init(void)
 {
 	sram_piece_cache = kmem_cache_create("sram_piece_cache",
 				sizeof(struct sram_piece),
@@ -233,7 +241,10 @@ void __init bfin_sram_init(void)
 	l1_data_sram_init();
 	l1_inst_sram_init();
 	l2_sram_init();
+
+	return 0;
 }
+pure_initcall(bfin_sram_init);
 
 /* SRAM allocate function */
 static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
@@ -732,6 +743,10 @@ found:
 }
 EXPORT_SYMBOL(sram_free_with_lsl);
 
+/* Allocate memory and keep in L1 SRAM List (lsl) so that the resources are
+ * tracked.  These are designed for userspace so that when a process exits,
+ * we can safely reap their resources.
+ */
 void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 {
 	void *addr = NULL;
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index df3925cb1c7..d70b445f4a8 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -325,12 +325,14 @@ static void end_crisv32_irq(unsigned int irq)
 {
 }
 
-void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
+int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&irq_lock, flags);
 	irq_allocations[irq - FIRST_IRQ].mask = *dest;
 	spin_unlock_irqrestore(&irq_lock, flags);
+
+	return 0;
 }
 
 static struct irq_chip crisv32_irq_type = {
diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h
index 5718dd8902a..a6aca819e9f 100644
--- a/arch/cris/include/asm/atomic.h
+++ b/arch/cris/include/asm/atomic.h
@@ -158,5 +158,5 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()    barrier()
 #define smp_mb__after_atomic_inc()     barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif
diff --git a/arch/cris/include/asm/bitsperlong.h b/arch/cris/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/cris/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/cris/include/asm/mman.h b/arch/cris/include/asm/mman.h
index 1c35e1b66b4..b7f0afba3ce 100644
--- a/arch/cris/include/asm/mman.h
+++ b/arch/cris/include/asm/mman.h
@@ -3,7 +3,7 @@
 
 /* verbatim copy of asm-i386/ version */
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/cris/include/asm/page.h b/arch/cris/include/asm/page.h
index f3fdbd09c34..be45ee366be 100644
--- a/arch/cris/include/asm/page.h
+++ b/arch/cris/include/asm/page.h
@@ -68,7 +68,7 @@ typedef struct page *pgtable_t;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _CRIS_PAGE_H */
 
diff --git a/arch/cris/include/asm/signal.h b/arch/cris/include/asm/signal.h
index 349ae682b56..ea6af9aad76 100644
--- a/arch/cris/include/asm/signal.h
+++ b/arch/cris/include/asm/signal.h
@@ -106,7 +106,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c
index a187833febc..abc13e368b9 100644
--- a/arch/cris/kernel/module.c
+++ b/arch/cris/kernel/module.c
@@ -48,8 +48,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	FREE_MODULE(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 9d1552a9ee2..8a5bd7a9c6f 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -6,6 +6,7 @@ config FRV
 	bool
 	default y
 	select HAVE_IDE
+	select HAVE_ARCH_TRACEHOOK
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 296c35cfb20..0409d981fd3 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -194,5 +194,5 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_ATOMIC_H */
diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h
index 287f6f697ce..50ae91b2967 100644
--- a/arch/frv/include/asm/bitops.h
+++ b/arch/frv/include/asm/bitops.h
@@ -112,7 +112,7 @@ extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsig
 #define atomic_clear_mask(mask, v)	atomic_test_and_ANDNOT_mask((mask), (v))
 #define atomic_set_mask(mask, v)	atomic_test_and_OR_mask((mask), (v))
 
-static inline int test_and_clear_bit(int nr, volatile void *addr)
+static inline int test_and_clear_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *ptr = addr;
 	unsigned long mask = 1UL << (nr & 31);
@@ -120,7 +120,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
 	return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
 }
 
-static inline int test_and_set_bit(int nr, volatile void *addr)
+static inline int test_and_set_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *ptr = addr;
 	unsigned long mask = 1UL << (nr & 31);
@@ -128,7 +128,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
 	return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
 }
 
-static inline int test_and_change_bit(int nr, volatile void *addr)
+static inline int test_and_change_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *ptr = addr;
 	unsigned long mask = 1UL << (nr & 31);
@@ -136,22 +136,22 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
 	return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
 }
 
-static inline void clear_bit(int nr, volatile void *addr)
+static inline void clear_bit(unsigned long nr, volatile void *addr)
 {
 	test_and_clear_bit(nr, addr);
 }
 
-static inline void set_bit(int nr, volatile void *addr)
+static inline void set_bit(unsigned long nr, volatile void *addr)
 {
 	test_and_set_bit(nr, addr);
 }
 
-static inline void change_bit(int nr, volatile void * addr)
+static inline void change_bit(unsigned long nr, volatile void *addr)
 {
 	test_and_change_bit(nr, addr);
 }
 
-static inline void __clear_bit(int nr, volatile void * addr)
+static inline void __clear_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask;
@@ -161,7 +161,7 @@ static inline void __clear_bit(int nr, volatile void * addr)
 	*a &= ~mask;
 }
 
-static inline void __set_bit(int nr, volatile void * addr)
+static inline void __set_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask;
@@ -171,7 +171,7 @@ static inline void __set_bit(int nr, volatile void * addr)
 	*a |= mask;
 }
 
-static inline void __change_bit(int nr, volatile void *addr)
+static inline void __change_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask;
@@ -181,7 +181,7 @@ static inline void __change_bit(int nr, volatile void *addr)
 	*a ^= mask;
 }
 
-static inline int __test_and_clear_bit(int nr, volatile void * addr)
+static inline int __test_and_clear_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask, retval;
@@ -193,7 +193,7 @@ static inline int __test_and_clear_bit(int nr, volatile void * addr)
 	return retval;
 }
 
-static inline int __test_and_set_bit(int nr, volatile void * addr)
+static inline int __test_and_set_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask, retval;
@@ -205,7 +205,7 @@ static inline int __test_and_set_bit(int nr, volatile void * addr)
 	return retval;
 }
 
-static inline int __test_and_change_bit(int nr, volatile void * addr)
+static inline int __test_and_change_bit(unsigned long nr, volatile void *addr)
 {
 	volatile unsigned long *a = addr;
 	int mask, retval;
@@ -220,12 +220,13 @@ static inline int __test_and_change_bit(int nr, volatile void * addr)
 /*
  * This routine doesn't need to be atomic.
  */
-static inline int __constant_test_bit(int nr, const volatile void * addr)
+static inline int
+__constant_test_bit(unsigned long nr, const volatile void *addr)
 {
 	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
 }
 
-static inline int __test_bit(int nr, const volatile void * addr)
+static inline int __test_bit(unsigned long nr, const volatile void *addr)
 {
 	int 	* a = (int *) addr;
 	int	mask;
diff --git a/arch/frv/include/asm/bitsperlong.h b/arch/frv/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/frv/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h
index 7279ec07d62..7bbf6e47f8c 100644
--- a/arch/frv/include/asm/elf.h
+++ b/arch/frv/include/asm/elf.h
@@ -116,6 +116,7 @@ do {											\
 } while(0)
 
 #define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
 #define ELF_FDPIC_CORE_EFLAGS	EF_FRV_FDPIC
 #define ELF_EXEC_PAGESIZE	16384
 
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h
index b4371e92868..58c1d11e2ac 100644
--- a/arch/frv/include/asm/mman.h
+++ b/arch/frv/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MMAN_H__
 #define __ASM_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h
index bd9c220094c..25c6a500235 100644
--- a/arch/frv/include/asm/page.h
+++ b/arch/frv/include/asm/page.h
@@ -73,6 +73,6 @@ extern unsigned long max_pfn;
 #endif /* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_PAGE_H */
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index 585d9b49949..492b5c4dfed 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -10,8 +10,8 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifndef ASM_PCI_H
-#define	ASM_PCI_H
+#ifndef _ASM_FRV_PCI_H
+#define _ASM_FRV_PCI_H
 
 #include <linux/mm.h>
 #include <asm/scatterlist.h>
@@ -43,12 +43,6 @@ extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_controller_num(PDEV)	(0)
 
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
 /* pci_unmap_{page,single} is a nop so... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
 #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
@@ -87,8 +81,7 @@ static inline void pci_dma_sync_single(struct pci_dev *hwdev,
 				       dma_addr_t dma_handle,
 				       size_t size, int direction)
 {
-	if (direction == PCI_DMA_NONE)
-                BUG();
+	BUG_ON(direction == PCI_DMA_NONE);
 
 	frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
 			    (unsigned long)bus_to_virt(dma_handle) + size);
@@ -105,14 +98,11 @@ static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
 				   int nelems, int direction)
 {
 	int i;
-
-	if (direction == PCI_DMA_NONE)
-                BUG();
+	BUG_ON(direction == PCI_DMA_NONE);
 
 	for (i = 0; i < nelems; i++)
 		frv_cache_wback_inv(sg_dma_address(&sg[i]),
 				    sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
 }
 
-
-#endif
+#endif /* _ASM_FRV_PCI_H */
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
index cf6934012b6..a54b535c9e4 100644
--- a/arch/frv/include/asm/ptrace.h
+++ b/arch/frv/include/asm/ptrace.h
@@ -65,6 +65,8 @@
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
+struct task_struct;
+
 /*
  * we dedicate GR28 to keeping a pointer to the current exception frame
  * - gr28 is destroyed on entry to the kernel from userspace
@@ -73,11 +75,18 @@ register struct pt_regs *__frame asm("gr28");
 
 #define user_mode(regs)			(!((regs)->psr & PSR_S))
 #define instruction_pointer(regs)	((regs)->pc)
+#define user_stack_pointer(regs)	((regs)->sp)
 
 extern unsigned long user_stack(const struct pt_regs *);
 extern void show_regs(struct pt_regs *);
 #define profile_pc(regs) ((regs)->pc)
-#endif
+
+#define task_pt_regs(task) ((task)->thread.frame0)
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
 
 #endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h
index 2079197d483..f071e813dcb 100644
--- a/arch/frv/include/asm/signal.h
+++ b/arch/frv/include/asm/signal.h
@@ -3,107 +3,15 @@
 
 #include <linux/types.h>
 
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
+#ifndef __KERNEL__
 /* Here we must cater to libcs that poke about in kernel headers.  */
 
 #define NSIG		32
 typedef unsigned long sigset_t;
 
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	(_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
+#endif /* !__KERNEL__ */
 
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
+#define SA_RESTORER	0x04000000 /* to get struct sigaction correct */
 
 #include <asm-generic/signal.h>
 
@@ -115,16 +23,6 @@ struct old_sigaction {
 	__sigrestore_t sa_restorer;
 };
 
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
 #else
 /* Here we must cater to libcs that poke about in kernel headers.  */
 
@@ -143,19 +41,4 @@ struct sigaction {
 
 #endif /* __KERNEL__ */
 
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_SIGNAL_H */
diff --git a/arch/frv/include/asm/syscall.h b/arch/frv/include/asm/syscall.h
new file mode 100644
index 00000000000..70689eb29b9
--- /dev/null
+++ b/arch/frv/include/asm/syscall.h
@@ -0,0 +1,123 @@
+/* syscall parameter access functions
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+/*
+ * Get the system call number or -1
+ */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->syscallno;
+}
+
+/*
+ * Restore the clobbered GR8 register
+ * (1st syscall arg was overwritten with syscall return or error)
+ */
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gr8 = regs->orig_gr8;
+}
+
+/*
+ * See if the syscall return value is an error, returning it if it is and 0 if
+ * not
+ */
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->gr8) ? regs->gr8 : 0;
+}
+
+/*
+ * Get the syscall return value
+ */
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gr8;
+}
+
+/*
+ * Set the syscall return value
+ */
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->gr8 = -error;
+	else
+		regs->gr8 = val;
+}
+
+/*
+ * Retrieve the system call arguments
+ */
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	/*
+	 * Do this simply for now. If we need to start supporting
+	 * fetching arguments from arbitrary indices, this will need some
+	 * extra logic. Presently there are no in-tree users that depend
+	 * on this behaviour.
+	 */
+	BUG_ON(i);
+
+	/* Argument pattern is: GR8, GR9, GR10, GR11, GR12, GR13 */
+	switch (n) {
+	case 6: args[5] = regs->gr13;
+	case 5: args[4] = regs->gr12;
+	case 4: args[3] = regs->gr11;
+	case 3: args[2] = regs->gr10;
+	case 2: args[1] = regs->gr9;
+	case 1:	args[0] = regs->gr8;
+		break;
+	default:
+		BUG();
+	}
+}
+
+/*
+ * Alter the system call arguments
+ */
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	/* Same note as above applies */
+	BUG_ON(i);
+
+	switch (n) {
+	case 6: regs->gr13 = args[5];
+	case 5: regs->gr12 = args[4];
+	case 4: regs->gr11 = args[3];
+	case 3: regs->gr10 = args[2];
+	case 2: regs->gr9  = args[1];
+	case 1: regs->gr8  = args[0];
+		break;
+	default:
+		BUG();
+	}
+}
+
+#endif /* _ASM_SYSCALL_H */
diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h
index a62fb587237..b4868aafe79 100644
--- a/arch/frv/include/asm/termios.h
+++ b/arch/frv/include/asm/termios.h
@@ -52,7 +52,7 @@ struct termio {
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 
 #ifdef __KERNEL__
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 #endif
 
 #endif /* _ASM_TERMIOS_H */
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index bb53ab753ff..e8a5ed7be02 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -109,20 +109,20 @@ register struct thread_info *__current_thread_info asm("gr15");
  * - other flags in MSW
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_SINGLESTEP		3	/* restore singlestep on return to user mode */
-#define TIF_IRET		4	/* return with iret */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		17	/* OOM killer killed process */
 #define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_IRET		(1 << TIF_IRET)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 1da523b3298..356e0e327a8 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -886,7 +886,6 @@ system_call:
 	bnc		icc0,#0,__syscall_badsys
 
 	ldi		@(gr15,#TI_FLAGS),gr4
-	ori		gr4,#_TIF_SYSCALL_TRACE,gr4
 	andicc		gr4,#_TIF_SYSCALL_TRACE,gr0,icc0
 	bne		icc0,#0,__syscall_trace_entry
 
@@ -1150,11 +1149,10 @@ __entry_work_notifysig:
 	# perform syscall entry tracing
 __syscall_trace_entry:
 	LEDS		0x6320
-	setlos.p	#0,gr8
-	call		do_syscall_trace
+	call		syscall_trace_entry
 
-	ldi		@(gr28,#REG_SYSCALLNO),gr7
-	lddi		@(gr28,#REG_GR(8)) ,gr8
+	lddi.p		@(gr28,#REG_GR(8)) ,gr8
+	ori		gr8,#0,gr7		; syscall_trace_entry() returned new syscallno
 	lddi		@(gr28,#REG_GR(10)),gr10
 	lddi.p		@(gr28,#REG_GR(12)),gr12
 
@@ -1169,11 +1167,10 @@ __syscall_exit_work:
 	beq		icc0,#1,__entry_work_pending
 
 	movsg		psr,gr23
-	andi		gr23,#~PSR_PIL,gr23	; could let do_syscall_trace() call schedule()
+	andi		gr23,#~PSR_PIL,gr23	; could let syscall_trace_exit() call schedule()
 	movgs		gr23,psr
 
-	setlos.p	#1,gr8
-	call		do_syscall_trace
+	call		syscall_trace_exit
 	bra		__entry_resume_userspace
 
 __syscall_badsys:
diff --git a/arch/frv/kernel/module.c b/arch/frv/kernel/module.c
index 850d168f69f..711763c8a6f 100644
--- a/arch/frv/kernel/module.c
+++ b/arch/frv/kernel/module.c
@@ -35,8 +35,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index 5e7d401d21e..60eeed3694c 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -19,6 +19,9 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -33,6 +36,169 @@
  */
 
 /*
+ * retrieve the contents of FRV userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct user_int_regs *iregs = &target->thread.user->i;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  iregs, 0, sizeof(*iregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*iregs), -1);
+}
+
+/*
+ * update the contents of the FRV userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct user_int_regs *iregs = &target->thread.user->i;
+	unsigned int offs_gr0, offs_gr1;
+	int ret;
+
+	/* not allowed to set PSR or __status */
+	if (pos < offsetof(struct user_int_regs, psr) + sizeof(long) &&
+	    pos + count > offsetof(struct user_int_regs, psr))
+		return -EIO;
+
+	if (pos < offsetof(struct user_int_regs, __status) + sizeof(long) &&
+	    pos + count > offsetof(struct user_int_regs, __status))
+		return -EIO;
+
+	/* set the control regs */
+	offs_gr0 = offsetof(struct user_int_regs, gr[0]);
+	offs_gr1 = offsetof(struct user_int_regs, gr[1]);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 iregs, 0, offs_gr0);
+	if (ret < 0)
+		return ret;
+
+	/* skip GR0/TBR */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					offs_gr0, offs_gr1);
+	if (ret < 0)
+		return ret;
+
+	/* set the general regs */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &iregs->gr[1], offs_gr1, sizeof(*iregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					sizeof(*iregs), -1);
+}
+
+/*
+ * retrieve the contents of FRV userspace FP/Media registers
+ */
+static int fpmregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct user_fpmedia_regs *fpregs = &target->thread.user->f;
+	int ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * update the contents of the FRV userspace FP/Media registers
+ */
+static int fpmregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct user_fpmedia_regs *fpregs = &target->thread.user->f;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
+}
+
+/*
+ * determine if the FP/Media registers have actually been used
+ */
+static int fpmregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	return tsk_used_math(target) ? regset->n : 0;
+}
+
+/*
+ * Define the register sets available on the FRV under Linux
+ */
+enum frv_regset {
+	REGSET_GENERAL,
+	REGSET_FPMEDIA,
+};
+
+static const struct user_regset frv_regsets[] = {
+	/*
+	 * General register format is:
+	 *	PSR, ISR, CCR, CCCR, LR, LCR, PC, (STATUS), SYSCALLNO, ORIG_G8
+	 *	GNER0-1, IACC0, TBR, GR1-63
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+	/*
+	 * FPU/Media register format is:
+	 *	FR0-63, FNER0-1, MSR0-1, ACC0-7, ACCG0-8, FSR
+	 */
+	[REGSET_FPMEDIA] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct user_fpmedia_regs) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpmregs_get,
+		.set		= fpmregs_set,
+		.active		= fpmregs_active,
+	},
+};
+
+static const struct user_regset_view user_frv_native_view = {
+	.name		= "frv",
+	.e_machine	= EM_FRV,
+	.regsets	= frv_regsets,
+	.n		= ARRAY_SIZE(frv_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_frv_native_view;
+}
+
+/*
  * Get contents of register REGNO in task TASK.
  */
 static inline long get_reg(struct task_struct *task, int regno)
@@ -69,40 +235,23 @@ static inline int put_reg(struct task_struct *task, int regno,
 }
 
 /*
- * check that an address falls within the bounds of the target process's memory
- * mappings
- */
-static inline int is_user_addr_valid(struct task_struct *child,
-				     unsigned long start, unsigned long len)
-{
-#ifdef CONFIG_MMU
-	if (start >= PAGE_OFFSET || len > PAGE_OFFSET - start)
-		return -EIO;
-	return 0;
-#else
-	struct vm_area_struct *vma;
-
-	vma = find_vma(child->mm, start);
-	if (vma && start >= vma->vm_start && start + len <= vma->vm_end)
-		return 0;
-
-	return -EIO;
-#endif
-}
-
-/*
  * Called by kernel/ptrace.c when detaching..
  *
  * Control h/w single stepping
  */
-void ptrace_disable(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
+{
+	child->thread.frame0->__status |= REG__STATUS_STEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
 	child->thread.frame0->__status &= ~REG__STATUS_STEP;
 }
 
-void ptrace_enable(struct task_struct *child)
+void ptrace_disable(struct task_struct *child)
 {
-	child->thread.frame0->__status |= REG__STATUS_STEP;
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -111,15 +260,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = -EIO;
-		if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
-			break;
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 		/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		tmp = 0;
@@ -163,15 +303,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-		/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = -EIO;
-		if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
-			break;
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr < 0)
@@ -179,7 +310,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 		ret = 0;
 		switch (addr >> 2) {
-		case 0 ... PT__END-1:
+		case 0 ... PT__END - 1:
 			ret = put_reg(child, addr >> 2, data);
 			break;
 
@@ -189,95 +320,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		ptrace_disable(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-		/* make the child exit.  Best I can do is send it a sigkill.
-		 * perhaps it should be put in the status that it wants to
-		 * exit.
-		 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		ptrace_disable(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_enable(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	case PTRACE_DETACH:	/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-	case PTRACE_GETREGS: { /* Get all integer regs from the child. */
-		int i;
-		for (i = 0; i < PT__GPEND; i++) {
-			tmp = get_reg(child, i);
-			if (put_user(tmp, (unsigned long *) data)) {
-				ret = -EFAULT;
-				break;
-			}
-			data += sizeof(long);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_SETREGS: { /* Set all integer regs in the child. */
-		int i;
-		for (i = 0; i < PT__GPEND; i++) {
-			if (get_user(tmp, (unsigned long *) data)) {
-				ret = -EFAULT;
-				break;
-			}
-			put_reg(child, i, tmp);
-			data += sizeof(long);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_GETFPREGS: { /* Get the child FP/Media state. */
-		ret = 0;
-		if (copy_to_user((void *) data,
-				 &child->thread.user->f,
-				 sizeof(child->thread.user->f)))
-			ret = -EFAULT;
-		break;
-	}
-
-	case PTRACE_SETFPREGS: { /* Set the child FP/Media state. */
-		ret = 0;
-		if (copy_from_user(&child->thread.user->f,
-				   (void *) data,
-				   sizeof(child->thread.user->f)))
-			ret = -EFAULT;
-		break;
-	}
+	case PTRACE_GETREGS:	/* Get all integer regs from the child. */
+		return copy_regset_to_user(child, &user_frv_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(child->thread.user->i),
+					   (void __user *)data);
+
+	case PTRACE_SETREGS:	/* Set all integer regs in the child. */
+		return copy_regset_from_user(child, &user_frv_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(child->thread.user->i),
+					     (const void __user *)data);
+
+	case PTRACE_GETFPREGS:	/* Get the child FP/Media state. */
+		return copy_regset_to_user(child, &user_frv_native_view,
+					   REGSET_FPMEDIA,
+					   0, sizeof(child->thread.user->f),
+					   (void __user *)data);
+
+	case PTRACE_SETFPREGS:	/* Set the child FP/Media state. */
+		return copy_regset_from_user(child, &user_frv_native_view,
+					     REGSET_FPMEDIA,
+					     0, sizeof(child->thread.user->f),
+					     (const void __user *)data);
 
 	case PTRACE_GETFDPIC:
 		tmp = 0;
@@ -300,414 +365,36 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	default:
-		ret = -EIO;
+		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
 	return ret;
 }
 
-int __nongprelbss kstrace;
-
-static const struct {
-	const char	*name;
-	unsigned	argmask;
-} __syscall_name_table[NR_syscalls] = {
-	[0]	= { "restart_syscall"			},
-	[1]	= { "exit",		0x000001	},
-	[2]	= { "fork",		0xffffff	},
-	[3]	= { "read",		0x000141	},
-	[4]	= { "write",		0x000141	},
-	[5]	= { "open",		0x000235	},
-	[6]	= { "close",		0x000001	},
-	[7]	= { "waitpid",		0x000141	},
-	[8]	= { "creat",		0x000025	},
-	[9]	= { "link",		0x000055	},
-	[10]	= { "unlink",		0x000005	},
-	[11]	= { "execve",		0x000445	},
-	[12]	= { "chdir",		0x000005	},
-	[13]	= { "time",		0x000004	},
-	[14]	= { "mknod",		0x000325	},
-	[15]	= { "chmod",		0x000025	},
-	[16]	= { "lchown",		0x000025	},
-	[17]	= { "break" },
-	[18]	= { "oldstat",		0x000045	},
-	[19]	= { "lseek",		0x000131	},
-	[20]	= { "getpid",		0xffffff	},
-	[21]	= { "mount",		0x043555	},
-	[22]	= { "umount",		0x000005	},
-	[23]	= { "setuid",		0x000001	},
-	[24]	= { "getuid",		0xffffff	},
-	[25]	= { "stime",		0x000004	},
-	[26]	= { "ptrace",		0x004413	},
-	[27]	= { "alarm",		0x000001	},
-	[28]	= { "oldfstat",		0x000041	},
-	[29]	= { "pause",		0xffffff	},
-	[30]	= { "utime",		0x000045	},
-	[31]	= { "stty" },
-	[32]	= { "gtty" },
-	[33]	= { "access",		0x000025	},
-	[34]	= { "nice",		0x000001	},
-	[35]	= { "ftime" },
-	[36]	= { "sync",		0xffffff	},
-	[37]	= { "kill",		0x000011	},
-	[38]	= { "rename",		0x000055	},
-	[39]	= { "mkdir",		0x000025	},
-	[40]	= { "rmdir",		0x000005	},
-	[41]	= { "dup",		0x000001	},
-	[42]	= { "pipe",		0x000004	},
-	[43]	= { "times",		0x000004	},
-	[44]	= { "prof" },
-	[45]	= { "brk",		0x000004	},
-	[46]	= { "setgid",		0x000001	},
-	[47]	= { "getgid",		0xffffff	},
-	[48]	= { "signal",		0x000041	},
-	[49]	= { "geteuid",		0xffffff	},
-	[50]	= { "getegid",		0xffffff	},
-	[51]	= { "acct",		0x000005	},
-	[52]	= { "umount2",		0x000035	},
-	[53]	= { "lock" },
-	[54]	= { "ioctl",		0x000331	},
-	[55]	= { "fcntl",		0x000331	},
-	[56]	= { "mpx" },
-	[57]	= { "setpgid",		0x000011	},
-	[58]	= { "ulimit" },
-	[60]	= { "umask",		0x000002	},
-	[61]	= { "chroot",		0x000005	},
-	[62]	= { "ustat",		0x000043	},
-	[63]	= { "dup2",		0x000011	},
-	[64]	= { "getppid",		0xffffff	},
-	[65]	= { "getpgrp",		0xffffff	},
-	[66]	= { "setsid",		0xffffff	},
-	[67]	= { "sigaction" },
-	[68]	= { "sgetmask" },
-	[69]	= { "ssetmask" },
-	[70]	= { "setreuid" },
-	[71]	= { "setregid" },
-	[72]	= { "sigsuspend" },
-	[73]	= { "sigpending" },
-	[74]	= { "sethostname" },
-	[75]	= { "setrlimit" },
-	[76]	= { "getrlimit" },
-	[77]	= { "getrusage" },
-	[78]	= { "gettimeofday" },
-	[79]	= { "settimeofday" },
-	[80]	= { "getgroups" },
-	[81]	= { "setgroups" },
-	[82]	= { "select" },
-	[83]	= { "symlink" },
-	[84]	= { "oldlstat" },
-	[85]	= { "readlink" },
-	[86]	= { "uselib" },
-	[87]	= { "swapon" },
-	[88]	= { "reboot" },
-	[89]	= { "readdir" },
-	[91]	= { "munmap",		0x000034	},
-	[92]	= { "truncate" },
-	[93]	= { "ftruncate" },
-	[94]	= { "fchmod" },
-	[95]	= { "fchown" },
-	[96]	= { "getpriority" },
-	[97]	= { "setpriority" },
-	[99]	= { "statfs" },
-	[100]	= { "fstatfs" },
-	[102]	= { "socketcall" },
-	[103]	= { "syslog" },
-	[104]	= { "setitimer" },
-	[105]	= { "getitimer" },
-	[106]	= { "stat" },
-	[107]	= { "lstat" },
-	[108]	= { "fstat" },
-	[111]	= { "vhangup" },
-	[114]	= { "wait4" },
-	[115]	= { "swapoff" },
-	[116]	= { "sysinfo" },
-	[117]	= { "ipc" },
-	[118]	= { "fsync" },
-	[119]	= { "sigreturn" },
-	[120]	= { "clone" },
-	[121]	= { "setdomainname" },
-	[122]	= { "uname" },
-	[123]	= { "modify_ldt" },
-	[123]	= { "cacheflush" },
-	[124]	= { "adjtimex" },
-	[125]	= { "mprotect" },
-	[126]	= { "sigprocmask" },
-	[127]	= { "create_module" },
-	[128]	= { "init_module" },
-	[129]	= { "delete_module" },
-	[130]	= { "get_kernel_syms" },
-	[131]	= { "quotactl" },
-	[132]	= { "getpgid" },
-	[133]	= { "fchdir" },
-	[134]	= { "bdflush" },
-	[135]	= { "sysfs" },
-	[136]	= { "personality" },
-	[137]	= { "afs_syscall" },
-	[138]	= { "setfsuid" },
-	[139]	= { "setfsgid" },
-	[140]	= { "_llseek",			0x014331	},
-	[141]	= { "getdents" },
-	[142]	= { "_newselect",		0x000141	},
-	[143]	= { "flock" },
-	[144]	= { "msync" },
-	[145]	= { "readv" },
-	[146]	= { "writev" },
-	[147]	= { "getsid",			0x000001	},
-	[148]	= { "fdatasync",		0x000001	},
-	[149]	= { "_sysctl",			0x000004	},
-	[150]	= { "mlock" },
-	[151]	= { "munlock" },
-	[152]	= { "mlockall" },
-	[153]	= { "munlockall" },
-	[154]	= { "sched_setparam" },
-	[155]	= { "sched_getparam" },
-	[156]	= { "sched_setscheduler" },
-	[157]	= { "sched_getscheduler" },
-	[158]	= { "sched_yield" },
-	[159]	= { "sched_get_priority_max" },
-	[160]	= { "sched_get_priority_min" },
-	[161]	= { "sched_rr_get_interval" },
-	[162]	= { "nanosleep",		0x000044	},
-	[163]	= { "mremap" },
-	[164]	= { "setresuid" },
-	[165]	= { "getresuid" },
-	[166]	= { "vm86" },
-	[167]	= { "query_module" },
-	[168]	= { "poll" },
-	[169]	= { "nfsservctl" },
-	[170]	= { "setresgid" },
-	[171]	= { "getresgid" },
-	[172]	= { "prctl",			0x333331	},
-	[173]	= { "rt_sigreturn",		0xffffff	},
-	[174]	= { "rt_sigaction",		0x001441	},
-	[175]	= { "rt_sigprocmask",		0x001441	},
-	[176]	= { "rt_sigpending",		0x000014	},
-	[177]	= { "rt_sigtimedwait",		0x001444	},
-	[178]	= { "rt_sigqueueinfo",		0x000411	},
-	[179]	= { "rt_sigsuspend",		0x000014	},
-	[180]	= { "pread",			0x003341	},
-	[181]	= { "pwrite",			0x003341	},
-	[182]	= { "chown",			0x000115	},
-	[183]	= { "getcwd" },
-	[184]	= { "capget" },
-	[185]	= { "capset" },
-	[186]	= { "sigaltstack" },
-	[187]	= { "sendfile" },
-	[188]	= { "getpmsg" },
-	[189]	= { "putpmsg" },
-	[190]	= { "vfork",			0xffffff	},
-	[191]	= { "ugetrlimit" },
-	[192]	= { "mmap2",			0x313314	},
-	[193]	= { "truncate64" },
-	[194]	= { "ftruncate64" },
-	[195]	= { "stat64",			0x000045	},
-	[196]	= { "lstat64",			0x000045	},
-	[197]	= { "fstat64",			0x000041	},
-	[198]	= { "lchown32" },
-	[199]	= { "getuid32",			0xffffff	},
-	[200]	= { "getgid32",			0xffffff	},
-	[201]	= { "geteuid32",		0xffffff	},
-	[202]	= { "getegid32",		0xffffff	},
-	[203]	= { "setreuid32" },
-	[204]	= { "setregid32" },
-	[205]	= { "getgroups32" },
-	[206]	= { "setgroups32" },
-	[207]	= { "fchown32" },
-	[208]	= { "setresuid32" },
-	[209]	= { "getresuid32" },
-	[210]	= { "setresgid32" },
-	[211]	= { "getresgid32" },
-	[212]	= { "chown32" },
-	[213]	= { "setuid32" },
-	[214]	= { "setgid32" },
-	[215]	= { "setfsuid32" },
-	[216]	= { "setfsgid32" },
-	[217]	= { "pivot_root" },
-	[218]	= { "mincore" },
-	[219]	= { "madvise" },
-	[220]	= { "getdents64" },
-	[221]	= { "fcntl64" },
-	[223]	= { "security" },
-	[224]	= { "gettid" },
-	[225]	= { "readahead" },
-	[226]	= { "setxattr" },
-	[227]	= { "lsetxattr" },
-	[228]	= { "fsetxattr" },
-	[229]	= { "getxattr" },
-	[230]	= { "lgetxattr" },
-	[231]	= { "fgetxattr" },
-	[232]	= { "listxattr" },
-	[233]	= { "llistxattr" },
-	[234]	= { "flistxattr" },
-	[235]	= { "removexattr" },
-	[236]	= { "lremovexattr" },
-	[237]	= { "fremovexattr" },
-	[238]	= { "tkill" },
-	[239]	= { "sendfile64" },
-	[240]	= { "futex" },
-	[241]	= { "sched_setaffinity" },
-	[242]	= { "sched_getaffinity" },
-	[243]	= { "set_thread_area" },
-	[244]	= { "get_thread_area" },
-	[245]	= { "io_setup" },
-	[246]	= { "io_destroy" },
-	[247]	= { "io_getevents" },
-	[248]	= { "io_submit" },
-	[249]	= { "io_cancel" },
-	[250]	= { "fadvise64" },
-	[252]	= { "exit_group",		0x000001	},
-	[253]	= { "lookup_dcookie" },
-	[254]	= { "epoll_create" },
-	[255]	= { "epoll_ctl" },
-	[256]	= { "epoll_wait" },
-	[257]	= { "remap_file_pages" },
-	[258]	= { "set_tid_address" },
-	[259]	= { "timer_create" },
-	[260]	= { "timer_settime" },
-	[261]	= { "timer_gettime" },
-	[262]	= { "timer_getoverrun" },
-	[263]	= { "timer_delete" },
-	[264]	= { "clock_settime" },
-	[265]	= { "clock_gettime" },
-	[266]	= { "clock_getres" },
-	[267]	= { "clock_nanosleep" },
-	[268]	= { "statfs64" },
-	[269]	= { "fstatfs64" },
-	[270]	= { "tgkill" },
-	[271]	= { "utimes" },
-	[272]	= { "fadvise64_64" },
-	[273]	= { "vserver" },
-	[274]	= { "mbind" },
-	[275]	= { "get_mempolicy" },
-	[276]	= { "set_mempolicy" },
-	[277]	= { "mq_open" },
-	[278]	= { "mq_unlink" },
-	[279]	= { "mq_timedsend" },
-	[280]	= { "mq_timedreceive" },
-	[281]	= { "mq_notify" },
-	[282]	= { "mq_getsetattr" },
-	[283]	= { "sys_kexec_load" },
-};
-
-asmlinkage void do_syscall_trace(int leaving)
+/*
+ * handle tracing of system call entry
+ * - return the revised system call number or ULONG_MAX to cause ENOSYS
+ */
+asmlinkage unsigned long syscall_trace_entry(void)
 {
-#if 0
-	unsigned long *argp;
-	const char *name;
-	unsigned argmask;
-	char buffer[16];
-
-	if (!kstrace)
-		return;
-
-	if (!current->mm)
-		return;
-
-	if (__frame->gr7 == __NR_close)
-		return;
-
-#if 0
-	if (__frame->gr7 != __NR_mmap2 &&
-	    __frame->gr7 != __NR_vfork &&
-	    __frame->gr7 != __NR_execve &&
-	    __frame->gr7 != __NR_exit)
-		return;
-#endif
-
-	argmask = 0;
-	name = NULL;
-	if (__frame->gr7 < NR_syscalls) {
-		name = __syscall_name_table[__frame->gr7].name;
-		argmask = __syscall_name_table[__frame->gr7].argmask;
-	}
-	if (!name) {
-		sprintf(buffer, "sys_%lx", __frame->gr7);
-		name = buffer;
-	}
-
-	if (!leaving) {
-		if (!argmask) {
-			printk(KERN_CRIT "[%d] %s(%lx,%lx,%lx,%lx,%lx,%lx)\n",
-			       current->pid,
-			       name,
-			       __frame->gr8,
-			       __frame->gr9,
-			       __frame->gr10,
-			       __frame->gr11,
-			       __frame->gr12,
-			       __frame->gr13);
-		}
-		else if (argmask == 0xffffff) {
-			printk(KERN_CRIT "[%d] %s()\n",
-			       current->pid,
-			       name);
-		}
-		else {
-			printk(KERN_CRIT "[%d] %s(",
-			       current->pid,
-			       name);
-
-			argp = &__frame->gr8;
-
-			do {
-				switch (argmask & 0xf) {
-				case 1:
-					printk("%ld", (long) *argp);
-					break;
-				case 2:
-					printk("%lo", *argp);
-					break;
-				case 3:
-					printk("%lx", *argp);
-					break;
-				case 4:
-					printk("%p", (void *) *argp);
-					break;
-				case 5:
-					printk("\"%s\"", (char *) *argp);
-					break;
-				}
-
-				argp++;
-				argmask >>= 4;
-				if (argmask)
-					printk(",");
-
-			} while (argmask);
-
-			printk(")\n");
-		}
-	}
-	else {
-		if ((int)__frame->gr8 > -4096 && (int)__frame->gr8 < 4096)
-			printk(KERN_CRIT "[%d] %s() = %ld\n", current->pid, name, __frame->gr8);
-		else
-			printk(KERN_CRIT "[%d] %s() = %lx\n", current->pid, name, __frame->gr8);
+	__frame->__status |= REG__STATUS_SYSC_ENTRY;
+	if (tracehook_report_syscall_entry(__frame)) {
+		/* tracing decided this syscall should not happen, so
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in
+		 * __frame->syscallno
+		 */
+		return ULONG_MAX;
 	}
-	return;
-#endif
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-
-	if (!(current->ptrace & PT_PTRACED))
-		return;
 
-	/* we need to indicate entry or exit to strace */
-	if (leaving)
-		__frame->__status |= REG__STATUS_SYSC_EXIT;
-	else
-		__frame->__status |= REG__STATUS_SYSC_ENTRY;
-
-	ptrace_notify(SIGTRAP);
+	return __frame->syscallno;
+}
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+/*
+ * handle tracing of system call exit
+ */
+asmlinkage void syscall_trace_exit(void)
+{
+	__frame->__status |= REG__STATUS_SYSC_EXIT;
+	tracehook_report_syscall_exit(__frame, 0);
 }
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 3bdb368292a..4a7a62c6e78 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/unistd.h>
 #include <linux/personality.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -516,6 +517,9 @@ static void do_signal(void)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, __frame,
+						 test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
@@ -564,4 +568,10 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags)
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal();
 
+	/* deal with notification on about to resume userspace execution */
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(__frame);
+	}
+
 } /* end do_notify_resume() */
diff --git a/arch/frv/kernel/uaccess.c b/arch/frv/kernel/uaccess.c
index 9fb771a20df..374f88d6cc0 100644
--- a/arch/frv/kernel/uaccess.c
+++ b/arch/frv/kernel/uaccess.c
@@ -23,8 +23,7 @@ long strncpy_from_user(char *dst, const char __user *src, long count)
 	char *p, ch;
 	long err = -EFAULT;
 
-	if (count < 0)
-		BUG();
+	BUG_ON(count < 0);
 
 	p = dst;
 
@@ -76,8 +75,7 @@ long strnlen_user(const char __user *src, long count)
 	long err = 0;
 	char ch;
 
-	if (count < 0)
-		BUG();
+	BUG_ON(count < 0);
 
 #ifndef CONFIG_MMU
 	if ((unsigned long) src < memory_start)
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 52ff9aec799..4e1ba0b1544 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -116,8 +116,7 @@ EXPORT_SYMBOL(dma_free_coherent);
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
 
@@ -151,8 +150,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		frv_cache_wback_inv(sg_dma_address(&sg[i]),
 				    sg_dma_address(&sg[i]) + sg_dma_len(&sg[i]));
 
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	return nents;
 }
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 3ddedebc4eb..45954f0813d 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -48,8 +48,7 @@ EXPORT_SYMBOL(dma_free_coherent);
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
 
@@ -81,8 +80,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	void *vaddr;
 	int i;
 
-	if (direction == DMA_NONE)
-                BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	dampr2 = __get_DAMPR(2);
 
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
index 833186c8dc3..33c8c0fa958 100644
--- a/arch/h8300/include/asm/atomic.h
+++ b/arch/h8300/include/asm/atomic.h
@@ -141,5 +141,5 @@ static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
 #define smp_mb__before_atomic_inc()    barrier()
 #define smp_mb__after_atomic_inc() barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/h8300/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
index 2a873508a9a..bd12b31b90e 100644
--- a/arch/h8300/include/asm/flat.h
+++ b/arch/h8300/include/asm/flat.h
@@ -5,7 +5,6 @@
 #ifndef __H8300_FLAT_H__
 #define __H8300_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		1
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
diff --git a/arch/h8300/include/asm/mman.h b/arch/h8300/include/asm/mman.h
index b9f104f22a3..cf35f0a6f12 100644
--- a/arch/h8300/include/asm/mman.h
+++ b/arch/h8300/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __H8300_MMAN_H__
 #define __H8300_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
index 0b6acf0b03a..837381a2df4 100644
--- a/arch/h8300/include/asm/page.h
+++ b/arch/h8300/include/asm/page.h
@@ -73,6 +73,6 @@ extern unsigned long memory_end;
 #endif /* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _H8300_PAGE_H */
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
index 7bc15048a64..fd8b66e40dc 100644
--- a/arch/h8300/include/asm/signal.h
+++ b/arch/h8300/include/asm/signal.h
@@ -105,7 +105,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
index cfc9127d2ce..0865e291c20 100644
--- a/arch/h8300/kernel/module.c
+++ b/arch/h8300/kernel/module.c
@@ -23,8 +23,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c
index cc0a3182db3..acb5047ab57 100644
--- a/arch/ia64/hp/sim/hpsim_irq.c
+++ b/arch/ia64/hp/sim/hpsim_irq.c
@@ -21,9 +21,10 @@ hpsim_irq_noop (unsigned int irq)
 {
 }
 
-static void
+static int
 hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
 {
+	return 0;
 }
 
 static struct hw_interrupt_type irq_type_hp_sim = {
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
index d37292bd987..88405cb0832 100644
--- a/arch/ia64/include/asm/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
@@ -216,5 +216,5 @@ atomic64_add_negative (__s64 i, atomic64_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_IA64_ATOMIC_H */
diff --git a/arch/ia64/include/asm/bitsperlong.h b/arch/ia64/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..ec4db3c970b
--- /dev/null
+++ b/arch/ia64/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_IA64_BITSPERLONG_H
+#define __ASM_IA64_BITSPERLONG_H
+
+#define __BITS_PER_LONG 64
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_IA64_BITSPERLONG_H */
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 4542651e6ac..5f43697aed3 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -371,6 +371,7 @@ struct kvm_vcpu_arch {
 	int last_run_cpu;
 	int vmm_tr_slot;
 	int vm_tr_slot;
+	int sn_rtc_tr_slot;
 
 #define KVM_MP_STATE_RUNNABLE          0
 #define KVM_MP_STATE_UNINITIALIZED     1
@@ -465,6 +466,7 @@ struct kvm_arch {
 	unsigned long	vmm_init_rr;
 
 	int		online_vcpus;
+	int		is_sn2;
 
 	struct kvm_ioapic *vioapic;
 	struct kvm_vm_stat stat;
@@ -472,6 +474,7 @@ struct kvm_arch {
 
 	struct list_head assigned_dev_head;
 	struct iommu_domain *iommu_domain;
+	int iommu_flags;
 	struct hlist_head irq_ack_notifier_list;
 
 	unsigned long irq_sources_bitmap;
@@ -578,6 +581,8 @@ struct kvm_vmm_info{
 	kvm_vmm_entry 	*vmm_entry;
 	kvm_tramp_entry *tramp_entry;
 	unsigned long 	vmm_ivt;
+	unsigned long	patch_mov_ar;
+	unsigned long	patch_mov_ar_sn2;
 };
 
 int kvm_highest_pending_irq(struct kvm_vcpu *vcpu);
@@ -585,7 +590,6 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu);
 int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
 void kvm_sal_emul(struct kvm_vcpu *vcpu);
 
-static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {}
 #endif /* __ASSEMBLY__*/
 
 #endif
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
index c73b87832a1..48cf8b98a0b 100644
--- a/arch/ia64/include/asm/mman.h
+++ b/arch/ia64/include/asm/mman.h
@@ -8,7 +8,7 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x00100		/* stack-like segment */
 #define MAP_GROWSUP	0x00200		/* register stack-like segment */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 7a9bff47564..0a9cc73d35c 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -146,6 +146,8 @@
 #define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
 #define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
 #define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+#define PAGE_KERNEL_UC	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX | \
+				 _PAGE_MA_UC)
 
 # ifndef __ASSEMBLY__
 
diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h
index 4f5ca5643cb..b166248d49a 100644
--- a/arch/ia64/include/asm/signal.h
+++ b/arch/ia64/include/asm/signal.h
@@ -114,7 +114,7 @@
 
 #endif /* __KERNEL__ */
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 # ifndef __ASSEMBLY__
 
diff --git a/arch/ia64/include/asm/suspend.h b/arch/ia64/include/asm/suspend.h
deleted file mode 100644
index b05bbb6074e..00000000000
--- a/arch/ia64/include/asm/suspend.h
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index e36b3716e71..fbf1ed3b44c 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -19,10 +19,6 @@
 # define __IA64_UL(x)		(x)
 # define __IA64_UL_CONST(x)	x
 
-# ifdef __KERNEL__
-#  define BITS_PER_LONG 64
-# endif
-
 #else
 # define __IA64_UL(x)		((unsigned long)(x))
 # define __IA64_UL_CONST(x)	x##UL
@@ -34,10 +30,7 @@ typedef unsigned int umode_t;
  */
 # ifdef __KERNEL__
 
-#define BITS_PER_LONG 64
-
 /* DMA addresses are 64-bits wide, in general.  */
-
 typedef u64 dma_addr_t;
 
 # endif /* __KERNEL__ */
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 5510317db37..baec6f00f7f 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
 {
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
 		return gsi;
@@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
 
 	fadt = (struct acpi_table_fadt *)fadt_header;
 
-	acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+	acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+				 ACPI_ACTIVE_LOW);
 	return 0;
 }
 
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 166e0d839fa..f92cef47bf8 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -329,7 +329,7 @@ unmask_irq (unsigned int irq)
 }
 
 
-static void
+static int
 iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 #ifdef CONFIG_SMP
@@ -343,15 +343,15 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	cpu = cpumask_first_and(cpu_online_mask, mask);
 	if (cpu >= nr_cpu_ids)
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	dest = cpu_physical_id(cpu);
 
 	if (!iosapic_intr_info[irq].count)
-		return;			/* not an IOSAPIC interrupt */
+		return -1;			/* not an IOSAPIC interrupt */
 
 	set_irq_affinity_info(irq, dest, redir);
 
@@ -376,7 +376,9 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 		iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
 		iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
 	}
+
 #endif
+	return 0;
 }
 
 /*
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index acc4d19ae62..b448197728b 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -610,6 +610,9 @@ static struct irqaction ipi_irqaction = {
 	.name =		"IPI"
 };
 
+/*
+ * KVM uses this interrupt to force a cpu out of guest mode
+ */
 static struct irqaction resched_irqaction = {
 	.handler =	dummy_handler,
 	.flags =	IRQF_DISABLED,
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 2b15e233f7f..0f8ade9331b 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -12,7 +12,7 @@
 static struct irq_chip	ia64_msi_chip;
 
 #ifdef CONFIG_SMP
-static void ia64_set_msi_irq_affinity(unsigned int irq,
+static int ia64_set_msi_irq_affinity(unsigned int irq,
 				      const cpumask_t *cpu_mask)
 {
 	struct msi_msg msg;
@@ -20,10 +20,10 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 	int cpu = first_cpu(*cpu_mask);
 
 	if (!cpu_online(cpu))
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	read_msi_msg(irq, &msg);
 
@@ -39,6 +39,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 
 	write_msi_msg(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 
@@ -130,17 +132,17 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 #ifdef CONFIG_DMAR
 #ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_cfg *cfg = irq_cfg + irq;
 	struct msi_msg msg;
 	int cpu = cpumask_first(mask);
 
 	if (!cpu_online(cpu))
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	dmar_msi_read(irq, &msg);
 
@@ -151,6 +153,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dmar_msi_write(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, mask);
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index 0a2d6b86075..64d52093787 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -23,7 +23,7 @@ if VIRTUALIZATION
 
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
-	depends on HAVE_KVM && EXPERIMENTAL
+	depends on HAVE_KVM && MODULES && EXPERIMENTAL
 	# for device assignment:
 	depends on PCI
 	select PREEMPT_NOTIFIERS
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d20a5db4c4d..80c57b0a21c 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -41,6 +41,9 @@
 #include <asm/div64.h>
 #include <asm/tlb.h>
 #include <asm/elf.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/shub_mmr.h>
 
 #include "misc.h"
 #include "vti.h"
@@ -65,6 +68,16 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+static unsigned long kvm_get_itc(struct kvm_vcpu *vcpu)
+{
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	if (vcpu->kvm->arch.is_sn2)
+		return rtc_time();
+	else
+#endif
+		return ia64_getreg(_IA64_REG_AR_ITC);
+}
+
 static void kvm_flush_icache(unsigned long start, unsigned long len)
 {
 	int l;
@@ -119,8 +132,7 @@ void kvm_arch_hardware_enable(void *garbage)
 	unsigned long saved_psr;
 	int slot;
 
-	pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base),
-				PAGE_KERNEL));
+	pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base), PAGE_KERNEL));
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
 	local_irq_restore(saved_psr);
@@ -283,6 +295,18 @@ static int handle_sal_call(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 }
 
+static int __apic_accept_irq(struct kvm_vcpu *vcpu, uint64_t vector)
+{
+	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
+
+	if (!test_and_set_bit(vector, &vpd->irr[0])) {
+		vcpu->arch.irq_new_pending = 1;
+		kvm_vcpu_kick(vcpu);
+		return 1;
+	}
+	return 0;
+}
+
 /*
  *  offset: address offset to IPI space.
  *  value:  deliver value.
@@ -292,20 +316,20 @@ static void vcpu_deliver_ipi(struct kvm_vcpu *vcpu, uint64_t dm,
 {
 	switch (dm) {
 	case SAPIC_FIXED:
-		kvm_apic_set_irq(vcpu, vector, 0);
 		break;
 	case SAPIC_NMI:
-		kvm_apic_set_irq(vcpu, 2, 0);
+		vector = 2;
 		break;
 	case SAPIC_EXTINT:
-		kvm_apic_set_irq(vcpu, 0, 0);
+		vector = 0;
 		break;
 	case SAPIC_INIT:
 	case SAPIC_PMI:
 	default:
 		printk(KERN_ERR"kvm: Unimplemented Deliver reserved IPI!\n");
-		break;
+		return;
 	}
+	__apic_accept_irq(vcpu, vector);
 }
 
 static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
@@ -413,6 +437,23 @@ static int handle_switch_rr6(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int kvm_sn2_setup_mappings(struct kvm_vcpu *vcpu)
+{
+	unsigned long pte, rtc_phys_addr, map_addr;
+	int slot;
+
+	map_addr = KVM_VMM_BASE + (1UL << KVM_VMM_SHIFT);
+	rtc_phys_addr = LOCAL_MMR_OFFSET | SH_RTC;
+	pte = pte_val(mk_pte_phys(rtc_phys_addr, PAGE_KERNEL_UC));
+	slot = ia64_itr_entry(0x3, map_addr, pte, PAGE_SHIFT);
+	vcpu->arch.sn_rtc_tr_slot = slot;
+	if (slot < 0) {
+		printk(KERN_ERR "Mayday mayday! RTC mapping failed!\n");
+		slot = 0;
+	}
+	return slot;
+}
+
 int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 {
 
@@ -426,7 +467,7 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 
 	if (irqchip_in_kernel(vcpu->kvm)) {
 
-		vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset;
+		vcpu_now_itc = kvm_get_itc(vcpu) + vcpu->arch.itc_offset;
 
 		if (time_after(vcpu_now_itc, vpd->itm)) {
 			vcpu->arch.timer_check = 1;
@@ -447,10 +488,10 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 		hrtimer_cancel(p_ht);
 		vcpu->arch.ht_active = 0;
 
-		if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+		if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests) ||
+				kvm_cpu_has_pending_timer(vcpu))
 			if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
-				vcpu->arch.mp_state =
-					KVM_MP_STATE_RUNNABLE;
+				vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 		if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
 			return -EINTR;
@@ -551,22 +592,35 @@ static int kvm_insert_vmm_mapping(struct kvm_vcpu *vcpu)
 	if (r < 0)
 		goto out;
 	vcpu->arch.vm_tr_slot = r;
+
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	if (kvm->arch.is_sn2) {
+		r = kvm_sn2_setup_mappings(vcpu);
+		if (r < 0)
+			goto out;
+	}
+#endif
+
 	r = 0;
 out:
 	return r;
-
 }
 
 static void kvm_purge_vmm_mapping(struct kvm_vcpu *vcpu)
 {
-
+	struct kvm *kvm = vcpu->kvm;
 	ia64_ptr_entry(0x3, vcpu->arch.vmm_tr_slot);
 	ia64_ptr_entry(0x3, vcpu->arch.vm_tr_slot);
-
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	if (kvm->arch.is_sn2)
+		ia64_ptr_entry(0x3, vcpu->arch.sn_rtc_tr_slot);
+#endif
 }
 
 static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu)
 {
+	unsigned long psr;
+	int r;
 	int cpu = smp_processor_id();
 
 	if (vcpu->arch.last_run_cpu != cpu ||
@@ -578,36 +632,27 @@ static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.host_rr6 = ia64_get_rr(RR6);
 	vti_set_rr6(vcpu->arch.vmm_rr);
-	return kvm_insert_vmm_mapping(vcpu);
+	local_irq_save(psr);
+	r = kvm_insert_vmm_mapping(vcpu);
+	local_irq_restore(psr);
+	return r;
 }
+
 static void kvm_vcpu_post_transition(struct kvm_vcpu *vcpu)
 {
 	kvm_purge_vmm_mapping(vcpu);
 	vti_set_rr6(vcpu->arch.host_rr6);
 }
 
-static int  vti_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	union context *host_ctx, *guest_ctx;
 	int r;
 
-	/*Get host and guest context with guest address space.*/
-	host_ctx = kvm_get_host_context(vcpu);
-	guest_ctx = kvm_get_guest_context(vcpu);
-
-	r = kvm_vcpu_pre_transition(vcpu);
-	if (r < 0)
-		goto out;
-	kvm_vmm_info->tramp_entry(host_ctx, guest_ctx);
-	kvm_vcpu_post_transition(vcpu);
-	r = 0;
-out:
-	return r;
-}
-
-static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
-{
-	int r;
+	/*
+	 * down_read() may sleep and return with interrupts enabled
+	 */
+	down_read(&vcpu->kvm->slots_lock);
 
 again:
 	if (signal_pending(current)) {
@@ -616,26 +661,31 @@ again:
 		goto out;
 	}
 
-	/*
-	 * down_read() may sleep and return with interrupts enabled
-	 */
-	down_read(&vcpu->kvm->slots_lock);
-
 	preempt_disable();
 	local_irq_disable();
 
-	vcpu->guest_mode = 1;
+	/*Get host and guest context with guest address space.*/
+	host_ctx = kvm_get_host_context(vcpu);
+	guest_ctx = kvm_get_guest_context(vcpu);
+
+	clear_bit(KVM_REQ_KICK, &vcpu->requests);
+
+	r = kvm_vcpu_pre_transition(vcpu);
+	if (r < 0)
+		goto vcpu_run_fail;
+
+	up_read(&vcpu->kvm->slots_lock);
 	kvm_guest_enter();
-	r = vti_vcpu_run(vcpu, kvm_run);
-	if (r < 0) {
-		local_irq_enable();
-		preempt_enable();
-		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
-		goto out;
-	}
+
+	/*
+	 * Transition to the guest
+	 */
+	kvm_vmm_info->tramp_entry(host_ctx, guest_ctx);
+
+	kvm_vcpu_post_transition(vcpu);
 
 	vcpu->arch.launched = 1;
-	vcpu->guest_mode = 0;
+	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
 
 	/*
@@ -646,9 +696,10 @@ again:
 	 */
 	barrier();
 	kvm_guest_exit();
-	up_read(&vcpu->kvm->slots_lock);
 	preempt_enable();
 
+	down_read(&vcpu->kvm->slots_lock);
+
 	r = kvm_handle_exit(kvm_run, vcpu);
 
 	if (r > 0) {
@@ -657,12 +708,20 @@ again:
 	}
 
 out:
+	up_read(&vcpu->kvm->slots_lock);
 	if (r > 0) {
 		kvm_resched(vcpu);
+		down_read(&vcpu->kvm->slots_lock);
 		goto again;
 	}
 
 	return r;
+
+vcpu_run_fail:
+	local_irq_enable();
+	preempt_enable();
+	kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+	goto out;
 }
 
 static void kvm_set_mmio_data(struct kvm_vcpu *vcpu)
@@ -788,6 +847,9 @@ struct  kvm *kvm_arch_create_vm(void)
 
 	if (IS_ERR(kvm))
 		return ERR_PTR(-ENOMEM);
+
+	kvm->arch.is_sn2 = ia64_platform_is("sn2");
+
 	kvm_init_vm(kvm);
 
 	kvm->arch.online_vcpus = 0;
@@ -884,7 +946,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	RESTORE_REGS(saved_gp);
 
 	vcpu->arch.irq_new_pending = 1;
-	vcpu->arch.itc_offset = regs->saved_itc - ia64_getreg(_IA64_REG_AR_ITC);
+	vcpu->arch.itc_offset = regs->saved_itc - kvm_get_itc(vcpu);
 	set_bit(KVM_REQ_RESUME, &vcpu->requests);
 
 	vcpu_put(vcpu);
@@ -1043,10 +1105,6 @@ static void kvm_free_vmm_area(void)
 	}
 }
 
-static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
-{
-}
-
 static int vti_init_vpd(struct kvm_vcpu *vcpu)
 {
 	int i;
@@ -1165,7 +1223,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 		regs->cr_iip = PALE_RESET_ENTRY;
 
 		/*Initialize itc offset for vcpus*/
-		itc_offset = 0UL - ia64_getreg(_IA64_REG_AR_ITC);
+		itc_offset = 0UL - kvm_get_itc(vcpu);
 		for (i = 0; i < kvm->arch.online_vcpus; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
@@ -1237,6 +1295,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 
 	local_irq_save(psr);
 	r = kvm_insert_vmm_mapping(vcpu);
+	local_irq_restore(psr);
 	if (r)
 		goto fail;
 	r = kvm_vcpu_init(vcpu, vcpu->kvm, id);
@@ -1254,13 +1313,11 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 		goto uninit;
 
 	kvm_purge_vmm_mapping(vcpu);
-	local_irq_restore(psr);
 
 	return 0;
 uninit:
 	kvm_vcpu_uninit(vcpu);
 fail:
-	local_irq_restore(psr);
 	return r;
 }
 
@@ -1291,7 +1348,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	vcpu->kvm = kvm;
 
 	cpu = get_cpu();
-	vti_vcpu_load(vcpu, cpu);
 	r = vti_vcpu_setup(vcpu, id);
 	put_cpu();
 
@@ -1427,7 +1483,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	}
 	for (i = 0; i < 4; i++)
 		regs->insvc[i] = vcpu->arch.insvc[i];
-	regs->saved_itc = vcpu->arch.itc_offset + ia64_getreg(_IA64_REG_AR_ITC);
+	regs->saved_itc = vcpu->arch.itc_offset + kvm_get_itc(vcpu);
 	SAVE_REGS(xtp);
 	SAVE_REGS(metaphysical_rr0);
 	SAVE_REGS(metaphysical_rr4);
@@ -1574,6 +1630,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
 {
+	kvm_flush_remote_tlbs(kvm);
 }
 
 long kvm_arch_dev_ioctl(struct file *filp,
@@ -1616,8 +1673,37 @@ out:
 	return 0;
 }
 
+
+/*
+ * On SN2, the ITC isn't stable, so copy in fast path code to use the
+ * SN2 RTC, replacing the ITC based default verion.
+ */
+static void kvm_patch_vmm(struct kvm_vmm_info *vmm_info,
+			  struct module *module)
+{
+	unsigned long new_ar, new_ar_sn2;
+	unsigned long module_base;
+
+	if (!ia64_platform_is("sn2"))
+		return;
+
+	module_base = (unsigned long)module->module_core;
+
+	new_ar = kvm_vmm_base + vmm_info->patch_mov_ar - module_base;
+	new_ar_sn2 = kvm_vmm_base + vmm_info->patch_mov_ar_sn2 - module_base;
+
+	printk(KERN_INFO "kvm: Patching ITC emulation to use SGI SN2 RTC "
+	       "as source\n");
+
+	/*
+	 * Copy the SN2 version of mov_ar into place. They are both
+	 * the same size, so 6 bundles is sufficient (6 * 0x10).
+	 */
+	memcpy((void *)new_ar, (void *)new_ar_sn2, 0x60);
+}
+
 static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
-						struct module *module)
+			    struct module *module)
 {
 	unsigned long module_base;
 	unsigned long vmm_size;
@@ -1639,6 +1725,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info,
 		return -EFAULT;
 
 	memcpy((void *)kvm_vmm_base, (void *)module_base, vmm_size);
+	kvm_patch_vmm(vmm_info, module);
 	kvm_flush_icache(kvm_vmm_base, vmm_size);
 
 	/*Recalculate kvm_vmm_info based on new VMM*/
@@ -1792,38 +1879,24 @@ void kvm_arch_hardware_unsetup(void)
 {
 }
 
-static void vcpu_kick_intr(void *info)
-{
-#ifdef DEBUG
-	struct kvm_vcpu *vcpu = (struct kvm_vcpu *)info;
-	printk(KERN_DEBUG"vcpu_kick_intr %p \n", vcpu);
-#endif
-}
-
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 {
-	int ipi_pcpu = vcpu->cpu;
-	int cpu = get_cpu();
+	int me;
+	int cpu = vcpu->cpu;
 
 	if (waitqueue_active(&vcpu->wq))
 		wake_up_interruptible(&vcpu->wq);
 
-	if (vcpu->guest_mode && cpu != ipi_pcpu)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
+	me = get_cpu();
+	if (cpu != me && (unsigned) cpu < nr_cpu_ids && cpu_online(cpu))
+		if (!test_and_set_bit(KVM_REQ_KICK, &vcpu->requests))
+			smp_send_reschedule(cpu);
 	put_cpu();
 }
 
-int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
+int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq)
 {
-
-	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
-
-	if (!test_and_set_bit(vec, &vpd->irr[0])) {
-		vcpu->arch.irq_new_pending = 1;
-		kvm_vcpu_kick(vcpu);
-		return 1;
-	}
-	return 0;
+	return __apic_accept_irq(vcpu, irq->vector);
 }
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest)
@@ -1836,20 +1909,18 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 	return 0;
 }
 
-struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector,
-				       unsigned long bitmap)
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2)
 {
-	struct kvm_vcpu *lvcpu = kvm->vcpus[0];
-	int i;
-
-	for (i = 1; i < kvm->arch.online_vcpus; i++) {
-		if (!kvm->vcpus[i])
-			continue;
-		if (lvcpu->arch.xtp > kvm->vcpus[i]->arch.xtp)
-			lvcpu = kvm->vcpus[i];
-	}
+	return vcpu1->arch.xtp - vcpu2->arch.xtp;
+}
 
-	return lvcpu;
+int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
+		int short_hand, int dest, int dest_mode)
+{
+	struct kvm_lapic *target = vcpu->arch.apic;
+	return (dest_mode == 0) ?
+		kvm_apic_match_physical_addr(target, dest) :
+		kvm_apic_match_logical_addr(target, dest);
 }
 
 static int find_highest_bits(int *dat)
@@ -1888,6 +1959,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
+{
+	/* do real check here */
+	return 1;
+}
+
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.timer_fired;
@@ -1918,6 +1995,7 @@ static int vcpu_reset(struct kvm_vcpu *vcpu)
 	long psr;
 	local_irq_save(psr);
 	r = kvm_insert_vmm_mapping(vcpu);
+	local_irq_restore(psr);
 	if (r)
 		goto fail;
 
@@ -1930,7 +2008,6 @@ static int vcpu_reset(struct kvm_vcpu *vcpu)
 	kvm_purge_vmm_mapping(vcpu);
 	r = 0;
 fail:
-	local_irq_restore(psr);
 	return r;
 }
 
diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c
index a8ae52ed563..e4b82319881 100644
--- a/arch/ia64/kvm/kvm_fw.c
+++ b/arch/ia64/kvm/kvm_fw.c
@@ -21,6 +21,9 @@
 
 #include <linux/kvm_host.h>
 #include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/shub_mmr.h>
 
 #include "vti.h"
 #include "misc.h"
@@ -188,12 +191,35 @@ static struct ia64_pal_retval pal_freq_base(struct kvm_vcpu *vcpu)
 	return result;
 }
 
-static struct ia64_pal_retval pal_freq_ratios(struct kvm_vcpu *vcpu)
+/*
+ * On the SGI SN2, the ITC isn't stable. Emulation backed by the SN2
+ * RTC is used instead. This function patches the ratios from SAL
+ * to match the RTC before providing them to the guest.
+ */
+static void sn2_patch_itc_freq_ratios(struct ia64_pal_retval *result)
 {
+	struct pal_freq_ratio *ratio;
+	unsigned long sal_freq, sal_drift, factor;
+
+	result->status = ia64_sal_freq_base(SAL_FREQ_BASE_PLATFORM,
+					    &sal_freq, &sal_drift);
+	ratio = (struct pal_freq_ratio *)&result->v2;
+	factor = ((sal_freq * 3) + (sn_rtc_cycles_per_second / 2)) /
+		sn_rtc_cycles_per_second;
+
+	ratio->num = 3;
+	ratio->den = factor;
+}
 
+static struct ia64_pal_retval pal_freq_ratios(struct kvm_vcpu *vcpu)
+{
 	struct ia64_pal_retval result;
 
 	PAL_CALL(result, PAL_FREQ_RATIOS, 0, 0, 0);
+
+	if (vcpu->kvm->arch.is_sn2)
+		sn2_patch_itc_freq_ratios(&result);
+
 	return result;
 }
 
diff --git a/arch/ia64/kvm/lapic.h b/arch/ia64/kvm/lapic.h
index 6d6cbcb1489..ee541cebcd7 100644
--- a/arch/ia64/kvm/lapic.h
+++ b/arch/ia64/kvm/lapic.h
@@ -20,6 +20,10 @@ void kvm_free_lapic(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
-int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig);
+int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
+		int short_hand, int dest, int dest_mode);
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2);
+int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq);
+#define kvm_apic_present(x) (true)
 
 #endif
diff --git a/arch/ia64/kvm/optvfault.S b/arch/ia64/kvm/optvfault.S
index 32254ce9a1b..f793be3efff 100644
--- a/arch/ia64/kvm/optvfault.S
+++ b/arch/ia64/kvm/optvfault.S
@@ -11,6 +11,7 @@
 
 #include <asm/asmmacro.h>
 #include <asm/processor.h>
+#include <asm/kvm_host.h>
 
 #include "vti.h"
 #include "asm-offsets.h"
@@ -140,6 +141,35 @@ GLOBAL_ENTRY(kvm_asm_mov_from_ar)
 	;;
 END(kvm_asm_mov_from_ar)
 
+/*
+ * Special SGI SN2 optimized version of mov_from_ar using the SN2 RTC
+ * clock as it's source for emulating the ITC. This version will be
+ * copied on top of the original version if the host is determined to
+ * be an SN2.
+ */
+GLOBAL_ENTRY(kvm_asm_mov_from_ar_sn2)
+	add r18=VMM_VCPU_ITC_OFS_OFFSET, r21
+	movl r19 = (KVM_VMM_BASE+(1<<KVM_VMM_SHIFT))
+
+	add r16=VMM_VCPU_LAST_ITC_OFFSET,r21
+	extr.u r17=r25,6,7
+	mov r24=b0
+	;;
+	ld8 r18=[r18]
+	ld8 r19=[r19]
+	addl r20=@gprel(asm_mov_to_reg),gp
+	;;
+	add r19=r19,r18
+	shladd r17=r17,4,r20
+	;;
+	adds r30=kvm_resume_to_guest-asm_mov_to_reg,r20
+	st8 [r16] = r19
+	mov b0=r17
+	br.sptk.few b0
+	;;
+END(kvm_asm_mov_from_ar_sn2)
+
+
 
 // mov r1=rr[r3]
 GLOBAL_ENTRY(kvm_asm_mov_from_rr)
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index b1dc80952d9..a8f84da04b4 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -652,20 +652,25 @@ void  kvm_ia64_handle_break(unsigned long ifa, struct kvm_pt_regs *regs,
 		unsigned long isr, unsigned long iim)
 {
 	struct kvm_vcpu *v = current_vcpu;
+	long psr;
 
 	if (ia64_psr(regs)->cpl == 0) {
 		/* Allow hypercalls only when cpl = 0.  */
 		if (iim == DOMN_PAL_REQUEST) {
+			local_irq_save(psr);
 			set_pal_call_data(v);
 			vmm_transition(v);
 			get_pal_call_result(v);
 			vcpu_increment_iip(v);
+			local_irq_restore(psr);
 			return;
 		} else if (iim == DOMN_SAL_REQUEST) {
+			local_irq_save(psr);
 			set_sal_call_data(v);
 			vmm_transition(v);
 			get_sal_call_result(v);
 			vcpu_increment_iip(v);
+			local_irq_restore(psr);
 			return;
 		}
 	}
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a18ee17b919..a2c6c15e476 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -788,13 +788,29 @@ void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
 		setfpreg(reg, val, regs);   /* FIXME: handle NATs later*/
 }
 
+/*
+ * The Altix RTC is mapped specially here for the vmm module
+ */
+#define SN_RTC_BASE	(u64 *)(KVM_VMM_BASE+(1UL<<KVM_VMM_SHIFT))
+static long kvm_get_itc(struct kvm_vcpu *vcpu)
+{
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+	struct kvm *kvm = (struct kvm *)KVM_VM_BASE;
+
+	if (kvm->arch.is_sn2)
+		return (*SN_RTC_BASE);
+	else
+#endif
+		return ia64_getreg(_IA64_REG_AR_ITC);
+}
+
 /************************************************************************
  * lsapic timer
  ***********************************************************************/
 u64 vcpu_get_itc(struct kvm_vcpu *vcpu)
 {
 	unsigned long guest_itc;
-	guest_itc = VMX(vcpu, itc_offset) + ia64_getreg(_IA64_REG_AR_ITC);
+	guest_itc = VMX(vcpu, itc_offset) + kvm_get_itc(vcpu);
 
 	if (guest_itc >= VMX(vcpu, last_itc)) {
 		VMX(vcpu, last_itc) = guest_itc;
@@ -809,7 +825,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 	struct kvm_vcpu *v;
 	struct kvm *kvm;
 	int i;
-	long itc_offset = val - ia64_getreg(_IA64_REG_AR_ITC);
+	long itc_offset = val - kvm_get_itc(vcpu);
 	unsigned long vitv = VCPU(vcpu, itv);
 
 	kvm = (struct kvm *)KVM_VM_BASE;
diff --git a/arch/ia64/kvm/vmm.c b/arch/ia64/kvm/vmm.c
index 9eee5c04bac..f4b4c899bb6 100644
--- a/arch/ia64/kvm/vmm.c
+++ b/arch/ia64/kvm/vmm.c
@@ -30,15 +30,19 @@ MODULE_AUTHOR("Intel");
 MODULE_LICENSE("GPL");
 
 extern char kvm_ia64_ivt;
+extern char kvm_asm_mov_from_ar;
+extern char kvm_asm_mov_from_ar_sn2;
 extern fpswa_interface_t *vmm_fpswa_interface;
 
 long vmm_sanity = 1;
 
 struct kvm_vmm_info vmm_info = {
-	.module	     = THIS_MODULE,
-	.vmm_entry   = vmm_entry,
-	.tramp_entry = vmm_trampoline,
-	.vmm_ivt     = (unsigned long)&kvm_ia64_ivt,
+	.module			= THIS_MODULE,
+	.vmm_entry		= vmm_entry,
+	.tramp_entry		= vmm_trampoline,
+	.vmm_ivt		= (unsigned long)&kvm_ia64_ivt,
+	.patch_mov_ar		= (unsigned long)&kvm_asm_mov_from_ar,
+	.patch_mov_ar_sn2	= (unsigned long)&kvm_asm_mov_from_ar_sn2,
 };
 
 static int __init  kvm_vmm_init(void)
diff --git a/arch/ia64/kvm/vmm_ivt.S b/arch/ia64/kvm/vmm_ivt.S
index 3ef1a017a31..40920c63064 100644
--- a/arch/ia64/kvm/vmm_ivt.S
+++ b/arch/ia64/kvm/vmm_ivt.S
@@ -95,7 +95,7 @@ GLOBAL_ENTRY(kvm_vmm_panic)
 	;;
 	srlz.i    // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -249,7 +249,7 @@ ENTRY(kvm_break_fault)
 	;;
 	srlz.i         // guarantee that interruption collection is on
 	;;
-	//(p15)ssm psr.i               // restore psr.i
+	(p15)ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -439,7 +439,7 @@ kvm_dispatch_vexirq:
 	;;
 	srlz.i // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	adds r3=8,r2                // set up second base pointer
 	;;
 	KVM_SAVE_REST
@@ -819,7 +819,7 @@ ENTRY(kvm_dtlb_miss_dispatch)
 	;;
 	srlz.i     // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor_prepare),gp
 	;;
 	KVM_SAVE_REST
@@ -842,7 +842,7 @@ ENTRY(kvm_itlb_miss_dispatch)
 	;;
 	srlz.i   // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -871,7 +871,7 @@ ENTRY(kvm_dispatch_reflection)
 	;;
 	srlz.i   // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -898,7 +898,7 @@ ENTRY(kvm_dispatch_virtualization_fault)
 	;;
 	srlz.i    // guarantee that interruption collection is on
 	;;
-	//(p15) ssm psr.i               // restore psr.i
+	(p15) ssm psr.i               // restore psr.i
 	addl r14=@gprel(ia64_leave_hypervisor_prepare),gp
 	;;
 	KVM_SAVE_REST
@@ -920,7 +920,7 @@ ENTRY(kvm_dispatch_interrupt)
 	;;
 	srlz.i
 	;;
-	//(p15) ssm psr.i
+	(p15) ssm psr.i
 	addl r14=@gprel(ia64_leave_hypervisor),gp
 	;;
 	KVM_SAVE_REST
@@ -1333,7 +1333,7 @@ hostret =   r24
 	;;
 (p7)    srlz.i
 	;;
-//(p6)    ssm psr.i
+(p6)    ssm psr.i
 	;;
 	mov rp=rpsave
 	mov ar.pfs=pfssave
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 2c2501f1315..4290a429bf7 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -254,7 +254,8 @@ u64 guest_vhpt_lookup(u64 iha, u64 *pte)
 			"(p7) st8 [%2]=r9;;"
 			"ssm psr.ic;;"
 			"srlz.d;;"
-			/* "ssm psr.i;;" Once interrupts in vmm open, need fix*/
+			"ssm psr.i;;"
+			"srlz.d;;"
 			: "=r"(ret) : "r"(iha), "r"(pte):"memory");
 
 	return ret;
diff --git a/arch/ia64/mm/extable.c b/arch/ia64/mm/extable.c
index 71c50dd8f87..e95d5ad9285 100644
--- a/arch/ia64/mm/extable.c
+++ b/arch/ia64/mm/extable.c
@@ -53,6 +53,32 @@ void sort_extable (struct exception_table_entry *start,
 	     cmp_ex, swap_ex);
 }
 
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->insn + x->insn;
+}
+
+#ifdef CONFIG_MODULES
+/*
+ * Any entry referring to the module init will be at the beginning or
+ * the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
+				  m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+
 const struct exception_table_entry *
 search_extable (const struct exception_table_entry *first,
 		const struct exception_table_entry *last,
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 66fd705e82c..764f26abac0 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -227,7 +227,7 @@ finish_up:
 	return new_irq_info;
 }
 
-static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
+static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
 {
 	struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
 	nasid_t nasid;
@@ -239,6 +239,8 @@ static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
 	list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
 				 sn_irq_lh[irq], list)
 		(void)sn_retarget_vector(sn_irq_info, nasid, slice);
+
+	return 0;
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c
index 81e428943d7..fbbfb970120 100644
--- a/arch/ia64/sn/kernel/msi_sn.c
+++ b/arch/ia64/sn/kernel/msi_sn.c
@@ -151,7 +151,7 @@ int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
 }
 
 #ifdef CONFIG_SMP
-static void sn_set_msi_irq_affinity(unsigned int irq,
+static int sn_set_msi_irq_affinity(unsigned int irq,
 				    const struct cpumask *cpu_mask)
 {
 	struct msi_msg msg;
@@ -168,7 +168,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	cpu = cpumask_first(cpu_mask);
 	sn_irq_info = sn_msi_info[irq].sn_irq_info;
 	if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
-		return;
+		return -1;
 
 	/*
 	 * Release XIO resources for the old MSI PCI address
@@ -189,7 +189,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
 	sn_msi_info[irq].sn_irq_info = new_irq_info;
 	if (new_irq_info == NULL)
-		return;
+		return -1;
 
 	/*
 	 * Map the xio address into bus space
@@ -206,6 +206,8 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 
 	write_msi_msg(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, cpu_mask);
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/m32r/include/asm/atomic.h b/arch/m32r/include/asm/atomic.h
index 2eed30f8408..63f0cf0f50d 100644
--- a/arch/m32r/include/asm/atomic.h
+++ b/arch/m32r/include/asm/atomic.h
@@ -314,5 +314,5 @@ static __inline__ void atomic_set_mask(unsigned long  mask, atomic_t *addr)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif	/* _ASM_M32R_ATOMIC_H */
diff --git a/arch/m32r/include/asm/bitsperlong.h b/arch/m32r/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/m32r/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h
index d851cf0c4aa..5d711c4688f 100644
--- a/arch/m32r/include/asm/flat.h
+++ b/arch/m32r/include/asm/flat.h
@@ -12,7 +12,6 @@
 #ifndef __ASM_M32R_FLAT_H
 #define __ASM_M32R_FLAT_H
 
-#define	flat_stack_align(sp)		(*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_set_persistent(relval, p)		0
diff --git a/arch/m32r/include/asm/mman.h b/arch/m32r/include/asm/mman.h
index 516a8973b13..04a5f40aa40 100644
--- a/arch/m32r/include/asm/mman.h
+++ b/arch/m32r/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __M32R_MMAN_H__
 #define __M32R_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h
index c9333089fe1..11777f7a562 100644
--- a/arch/m32r/include/asm/page.h
+++ b/arch/m32r/include/asm/page.h
@@ -82,6 +82,6 @@ typedef struct page *pgtable_t;
 #define devmem_is_allowed(x) 1
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_M32R_PAGE_H */
diff --git a/arch/m32r/include/asm/pci.h b/arch/m32r/include/asm/pci.h
index fe785d167db..07d3834c6de 100644
--- a/arch/m32r/include/asm/pci.h
+++ b/arch/m32r/include/asm/pci.h
@@ -3,6 +3,4 @@
 
 #include <asm-generic/pci.h>
 
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
 #endif /* _ASM_M32R_PCI_H */
diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h
index 1a607066bc6..9c1acb2b1a9 100644
--- a/arch/m32r/include/asm/signal.h
+++ b/arch/m32r/include/asm/signal.h
@@ -107,7 +107,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/m32r/kernel/module.c b/arch/m32r/kernel/module.c
index 8d420579438..cb5f37d78d4 100644
--- a/arch/m32r/kernel/module.c
+++ b/arch/m32r/kernel/module.c
@@ -44,8 +44,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h
index eb0ab9d4ee7..88b7af20a99 100644
--- a/arch/m68k/include/asm/atomic_mm.h
+++ b/arch/m68k/include/asm/atomic_mm.h
@@ -192,5 +192,5 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ARCH_M68K_ATOMIC __ */
diff --git a/arch/m68k/include/asm/atomic_no.h b/arch/m68k/include/asm/atomic_no.h
index 6bb674855a3..5674cb9449b 100644
--- a/arch/m68k/include/asm/atomic_no.h
+++ b/arch/m68k/include/asm/atomic_no.h
@@ -151,5 +151,5 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 #define atomic_dec_return(v) atomic_sub_return(1,(v))
 #define atomic_inc_return(v) atomic_add_return(1,(v))
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/m68k/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h
index 814b5174a8e..a0e29079397 100644
--- a/arch/m68k/include/asm/flat.h
+++ b/arch/m68k/include/asm/flat.h
@@ -5,7 +5,6 @@
 #ifndef __M68KNOMMU_FLAT_H__
 #define __M68KNOMMU_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 49d016e6391..83bbcfd6e8f 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -59,5 +59,14 @@
 #define MCFPIT_IMR		MCFINTC_IMRL
 #define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
 
+/*
+ *  Reset Controll Unit.
+ */
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif  /* m520xsim_h */
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index bf397313e93..55183b5df1b 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -41,5 +41,14 @@
 #define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
 #define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
 
+/*
+ *  Reset Controll Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 1f63ab3fb3e..95f4f8ee8f7 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -70,5 +70,14 @@
 #define UART2_ENABLE_MASK	0x3f00 
 #endif
 
+/*
+ *  Reset Controll Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
 /****************************************************************************/
 #endif	/* m527xsim_h */
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 28bf783a5d6..d79c49f8134 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -56,6 +56,14 @@
 #define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
 
 
+/*
+ *  Reset Control Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			0x110000
+#define	MCF_RSR			0x110001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
 /*********************************************************************
 *
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index ce603451b55..eb7fd444894 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -127,6 +127,18 @@
 
 /*********************************************************************
  *
+ * Reset Controller Module
+ *
+ *********************************************************************/
+
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
+/*********************************************************************
+ *
  * Inter-IC (I2C) Module
  *
  *********************************************************************/
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
index 1626d37f489..9f5c4c4b3c7 100644
--- a/arch/m68k/include/asm/mman.h
+++ b/arch/m68k/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __M68K_MMAN_H__
 #define __M68K_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h
index a34b8bad784..d009f3ea39a 100644
--- a/arch/m68k/include/asm/page_mm.h
+++ b/arch/m68k/include/asm/page_mm.h
@@ -223,6 +223,6 @@ static inline __attribute_const__ int __virt_to_node_shift(void)
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _M68K_PAGE_H */
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 3a1ede4544c..9aa3f90f485 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -72,6 +72,6 @@ extern unsigned long memory_end;
 
 #endif /* __ASSEMBLY__ */
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _M68KNOMMU_PAGE_H */
diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h
index 91cba18acdd..7a1e0ba35f5 100644
--- a/arch/m68k/include/asm/processor_no.h
+++ b/arch/m68k/include/asm/processor_no.h
@@ -72,10 +72,10 @@ struct thread_struct {
 	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
 };
 
-#define INIT_THREAD  { \
-	sizeof(init_stack) + (unsigned long) init_stack, 0, \
-	PS_S, __KERNEL_DS, \
-	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+#define INIT_THREAD  {							\
+	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
+	.sr	= PS_S,							\
+	.fs	= __KERNEL_DS,						\
 }
 
 /*
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 08788fdefde..5bc09c787a1 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -103,7 +103,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/m68k/include/asm/suspend.h b/arch/m68k/include/asm/suspend.h
deleted file mode 100644
index 57b3ddb4d26..00000000000
--- a/arch/m68k/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SUSPEND_H
-#define _M68K_SUSPEND_H
-
-/* Dummy include. */
-
-#endif  /* _M68K_SUSPEND_H */
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
index 9e3054ea59e..5b754aace74 100644
--- a/arch/m68k/include/asm/swab.h
+++ b/arch/m68k/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _M68K_SWAB_H
 #define _M68K_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #define __SWAB_64_THRU_32__
diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h
index 4496c0aa837..3c0718d7439 100644
--- a/arch/m68k/include/asm/system_no.h
+++ b/arch/m68k/include/asm/system_no.h
@@ -203,113 +203,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 #include <asm-generic/cmpxchg.h>
 #endif
 
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
-	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({		\
-        local_irq_disable();		\
-        asm("				\
-        moveal #0x10c00000, %a0;	\
-        moveb #0, 0xFFFFF300;		\
-        moveal 0(%a0), %sp;		\
-        moveal 4(%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        jmp 0xf0000400;			\
-        ");				\
-})
-#elif defined(CONFIG_NETtel) || \
-      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-	moveal #0x10000044, %a0;	\
-	movel #0xffffffff, (%a0);	\
-	moveal #0x10000001, %a0;	\
-	moveb #0x00, (%a0);		\
-        moveal #0xf0000004, %a0;	\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */ 
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %%sr;		\
-	move.l	%0+0x40,%%d0;		\
-	and.l	%0+0x44,%%d0;		\
-	andi.l	#0xfffff000,%%d0;	\
-	mov.l	%%d0,%%a0;		\
-	or.l	4(%%a0),%%d0;		\
-	mov.l	%%d0,%%a0;		\
-	jmp (%%a0);"			\
-	: /* No output */		\
-	: "o" (*(char *)MCF_MBAR) );	\
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({						\
-	unsigned char volatile *reset;		\
-	asm("move.w	#0x2700, %sr");		\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
-	while(1)				\
-	*reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %sr;		\
-	movel #0x01000000, %sp;		\
-	moveal #0x40110000, %a0;	\
-	moveb #0x80, (%a0);		\
-	");				\
-})
-#elif defined(CONFIG_M520x)
-	/*
-	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
-	 * RCR), that when set, resets the MCF5208.
-	 */
-#define HARD_RESET_NOW() 		\
-({					\
-	unsigned char volatile *reset;	\
-	asm("move.w     #0x2700, %sr");	\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
-	while(1)			\
-		*reset |= 0x80;		\
-})
-#else
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        moveal #0x4, %a0;		\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-#endif
 #define arch_align_stack(x) (x)
 
 
diff --git a/arch/m68k/kernel/module.c b/arch/m68k/kernel/module.c
index 774862bc697..cd6bcb1c957 100644
--- a/arch/m68k/kernel/module.c
+++ b/arch/m68k/kernel/module.c
@@ -31,8 +31,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index f4782d2dce8..f56faa5c9cd 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -26,7 +26,6 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
-#include <asm/thread_info.h>
 #include <asm/errno.h>
 #include <asm/setup.h>
 #include <asm/segment.h>
diff --git a/arch/m68knommu/kernel/module.c b/arch/m68knommu/kernel/module.c
index 3b1a2ff61dd..d11ffae7956 100644
--- a/arch/m68knommu/kernel/module.c
+++ b/arch/m68knommu/kernel/module.c
@@ -23,8 +23,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 5985f198902..5c2bb3eeaaa 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -166,15 +166,13 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		"BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		(int) &_sdata, (int) &_edata,
-		(int) &_sbss, (int) &_ebss);
-	printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
-		(int) &_ebss, (int) memory_start,
-		(int) memory_start, (int) memory_end);
-#endif
+	pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
+		 "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
+		 (int) &_sdata, (int) &_edata,
+		 (int) &_sbss, (int) &_ebss);
+	pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
+		 (int) &_ebss, (int) memory_start,
+		 (int) memory_start, (int) memory_end);
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 7befc0c357e..b1703c67a4f 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -126,9 +126,7 @@ void __init mem_init(void)
 	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
 	unsigned long end_mem   = memory_end; /* DAVIDM - this must not include kernel stack at top */
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-#endif
+	pr_debug("Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
 
 	end_mem &= PAGE_MASK;
 	high_memory = (void *) end_mem;
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index 53a5920c2b7..f6f79874e9a 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,10 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5206_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -109,10 +104,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5206_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
-	mach_reset = coldfire_reset;
+	mach_reset = m5206_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index db902540bf2..65887799db8 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,10 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5206e_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -109,6 +104,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5206e_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -119,7 +125,7 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif /* CONFIG_NETtel */
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5206e_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 855fc6a79d7..1c43a8aec69 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -23,10 +22,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m520x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -169,9 +164,17 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m520x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = coldfire_reset;
+	mach_reset = m520x_cpu_reset;
 	m520x_uarts_init();
 	m520x_fec_init();
 }
diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 74133f27b30..961fefebca1 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -24,10 +23,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m523x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -145,13 +140,20 @@ void mcf_autovector(unsigned int vec)
 {
 	/* Everything is auto-vectored on the 523x */
 }
+/***************************************************************************/
+
+static void m523x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
 
 /***************************************************************************/
 
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
-	mach_reset = coldfire_reset;
+	mach_reset = m523x_cpu_reset;
 	m523x_uarts_init();
 	m523x_fec_init();
 }
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 9eab19d01eb..93d99882592 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -20,10 +19,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5249_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -106,10 +101,21 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5249_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
-	mach_reset = coldfire_reset;
+	mach_reset = m5249_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index e049245f409..5f95fcde05f 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,8 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -170,6 +167,19 @@ void mcf_settimericr(int timer, int level)
 
 /***************************************************************************/
 
+static void m5272_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to reset, and enabled */
+	__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
+	__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
+	__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 #if defined (CONFIG_MOD5272)
@@ -194,7 +204,7 @@ void __init config_BSP(char *commandp, int size)
 
 	mcf_timervector = 69;
 	mcf_profilevector = 70;
-	mach_reset = coldfire_reset;
+	mach_reset = m5272_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index 428b15922ef..f746439cfd3 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -24,10 +23,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m527x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -227,10 +222,18 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m527x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
-	mach_reset = coldfire_reset;
+	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
 }
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index bee526f4d1a..a1d1a61c4fe 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -31,10 +31,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m528x_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -171,6 +167,14 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
+static void m528x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
+}
+
+/***************************************************************************/
+
 #ifdef CONFIG_WILDFIRE
 void wildfire_halt(void)
 {
@@ -214,6 +218,7 @@ void __init config_BSP(char *commandp, int size)
 
 static int __init init_BSP(void)
 {
+	mach_reset = m528x_cpu_reset;
 	m528x_uarts_init();
 	m528x_fec_init();
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 44803bf70a6..39da9e9ff67 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -22,8 +21,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -119,6 +116,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5307_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -134,7 +142,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_timerlevel = 6;
 #endif
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5307_cpu_reset;
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index 591f2f80113..cdb761971f7 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -31,8 +31,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -164,6 +162,14 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+static void m532x_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -181,7 +187,7 @@ void __init config_BSP(char *commandp, int size)
 
 	mcf_timervector = 64+32;
 	mcf_profilevector = 64+33;
-	mach_reset = coldfire_reset;
+	mach_reset = m532x_cpu_reset;
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index 0ee8c1a200c..b41d942bf8d 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -21,8 +20,6 @@
 
 /***************************************************************************/
 
-void coldfire_reset(void);
-
 extern unsigned int mcf_timervector;
 extern unsigned int mcf_profilevector;
 extern unsigned int mcf_timerlevel;
@@ -110,6 +107,17 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 /***************************************************************************/
 
+void m5407_cpu_reset(void)
+{
+	local_irq_disable();
+	/* set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -121,7 +129,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_timerlevel = 6;
 #endif
 
-	mach_reset = coldfire_reset;
+	mach_reset = m5407_cpu_reset;
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/vectors.c b/arch/m68knommu/platform/coldfire/vectors.c
index 6cf89462023..bdca0297fa9 100644
--- a/arch/m68knommu/platform/coldfire/vectors.c
+++ b/arch/m68knommu/platform/coldfire/vectors.c
@@ -96,10 +96,3 @@ void ack_vector(unsigned int irq)
 }
 
 /***************************************************************************/
-
-void coldfire_reset(void)
-{
-	HARD_RESET_NOW();
-}
-
-/***************************************************************************/
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 8cc312b5d4d..b50b845fdd5 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config SWAP
 	def_bool n
@@ -49,13 +50,14 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config PCI
-	depends on !MMU
 	def_bool n
 
 config NO_DMA
-	depends on !MMU
-	def_bool n
+	def_bool y
 
 source "init/Kconfig"
 
@@ -72,7 +74,8 @@ source "kernel/Kconfig.preempt"
 source "kernel/Kconfig.hz"
 
 config MMU
-	def_bool n
+	bool "MMU support"
+	default n
 
 config NO_MMU
 	bool
@@ -105,9 +108,6 @@ config CMDLINE_FORCE
 config OF
 	def_bool y
 
-config OF_DEVICE
-	def_bool y
-
 config PROC_DEVICETREE
 	bool "Support for device tree in /proc"
 	depends on PROC_FS
@@ -118,6 +118,113 @@ config PROC_DEVICETREE
 
 endmenu
 
+menu "Advanced setup"
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	depends on MMU
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config HIGHMEM_START_BOOL
+	bool "Set high memory pool address"
+	depends on ADVANCED_OPTIONS && HIGHMEM
+	help
+	  This option allows you to set the base address of the kernel virtual
+	  area used to map high memory pages.  This can be useful in
+	  optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config HIGHMEM_START
+	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
+	depends on MMU
+	default "0xfe000000"
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	depends on MMU
+	default "0x30000000"
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory (the kernel image will be linked at
+	  this address).  This can be useful in optimizing the virtual memory
+	  layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default "0xc0000000" if MMU
+	default KERNEL_BASE_ADDR if !MMU
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	depends on MMU
+	default "0x80000000"
+
+config CONSISTENT_START_BOOL
+	bool "Set custom consistent memory pool address"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the base virtual address
+	  of the the consistent memory pool.  This pool of virtual
+	  memory is used to make consistent memory allocations.
+
+config CONSISTENT_START
+	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+	depends on MMU
+	default "0xff100000" if NOT_COHERENT_CACHE
+
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	depends on MMU
+	default "0x00200000" if NOT_COHERENT_CACHE
+
+endmenu
+
 source "mm/Kconfig"
 
 menu "Exectuable file formats"
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index aaadfa701da..d0bcf80a113 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -1,4 +1,8 @@
+ifeq ($(CONFIG_MMU),y)
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
 UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
@@ -36,6 +40,8 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 # r31 holds current when in kernel mode
 CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
+LDFLAGS		:=
+LDFLAGS_vmlinux	:=
 LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
 LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 844edf406d3..c2bb043a029 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -7,6 +7,8 @@ targets := linux.bin linux.bin.gz
 OBJCOPYFLAGS_linux.bin  := -O binary
 
 $(obj)/linux.bin: vmlinux FORCE
+	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
+	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
new file mode 100644
index 00000000000..bd0b85ec38f
--- /dev/null
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -0,0 +1,798 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Fri May 22 10:02:33 2009
+#
+CONFIG_MICROBLAZE=y
+# CONFIG_SWAP is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform options
+#
+CONFIG_PLATFORM_GENERIC=y
+CONFIG_OPT_LIB_FUNCTION=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_ALLOW_EDIT_AUTO=y
+
+#
+# Automatic platform settings from Kconfig.auto
+#
+
+#
+# Definitions for MICROBLAZE0
+#
+CONFIG_KERNEL_BASE_ADDR=0x90000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
+
+#
+# Processor type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_MMU=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_OF=y
+CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Exectuable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_HEART_BEAT=y
+CONFIG_DEBUG_BOOTMEM=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index beb7ecd7279..4ef6af0a8f3 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -80,6 +82,8 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Exectuable file formats
@@ -180,7 +185,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -563,6 +570,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -601,8 +613,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
@@ -777,6 +789,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -784,6 +797,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index 31820dfef56..db5294c30ca 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -1,26 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += auxvec.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += linkage.h
-header-y += msgbuf.h
-header-y += poll.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += statfs.h
-header-y += stat.h
-header-y += termbits.h
-header-y += ucontext.h
-
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += termios.h
+header-y  += elf.h
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index a448d94ab72..0de612ad7cb 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -118,6 +118,6 @@ static inline int atomic_dec_if_positive(atomic_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitsperlong.h b/arch/microblaze/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/microblaze/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index 3300b785049..f989d6aad64 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007 PetaLogix
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
  * based on v850 version which was
  * Copyright (C) 2001,02,03 NEC Electronics Corporation
@@ -43,6 +44,23 @@
 #define flush_icache_range(start, len)	__invalidate_icache_range(start, len)
 #define flush_icache_page(vma, pg)		do { } while (0)
 
+#ifndef CONFIG_MMU
+# define flush_icache_user_range(start, len)	do { } while (0)
+#else
+# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all()
+
+# define flush_page_to_ram(page)		do { } while (0)
+
+# define flush_icache()			__invalidate_icache_all()
+# define flush_cache_sigtramp(vaddr) \
+			__invalidate_icache_range(vaddr, vaddr + 8)
+
+# define flush_dcache_mmap_lock(mapping)	do { } while (0)
+# define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+# define flush_cache_dup_mm(mm)			do { } while (0)
+#endif
+
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 92b30762ce5..97ea46b5cf8 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -51,7 +51,8 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+								__wsum sum);
 
 /*
  * the same as csum_partial_copy, but copies from user space.
@@ -59,8 +60,8 @@ extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
-					int len, int sum, int *csum_err);
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					int len, __wsum sum, int *csum_err);
 
 #define csum_partial_copy_nocheck(src, dst, len, sum)	\
 	csum_partial_copy((src), (dst), (len), (sum))
@@ -75,11 +76,12 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
 /*
  *	Fold a partial checksum
  */
-static inline __sum16 csum_fold(unsigned int sum)
+static inline __sum16 csum_fold(__wsum csum)
 {
+	u32 sum = (__force u32)csum;
 	sum = (sum & 0xffff) + (sum >> 16);
 	sum = (sum & 0xffff) + (sum >> 16);
-	return ~sum;
+	return (__force __sum16)~sum;
 }
 
 static inline __sum16
@@ -93,6 +95,6 @@ csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
+extern __sum16 ip_compute_csum(const void *buff, int len);
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
index 8375ea991e2..29303ed825c 100644
--- a/arch/microblaze/include/asm/current.h
+++ b/arch/microblaze/include/asm/current.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,12 @@
 #ifndef _ASM_MICROBLAZE_CURRENT_H
 #define _ASM_MICROBLAZE_CURRENT_H
 
+/*
+ * Register used to hold the current task pointer while in the kernel.
+ * Any `call clobbered' register without a special meaning should be OK,
+ * but check asm/microblaze/kernel/entry.S to be sure.
+ */
+#define CURRENT_TASK	r31
 # ifndef __ASSEMBLY__
 /*
  * Dedicate r31 to keeping the current task pointer
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 17336252a9b..d00e4009916 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -1,129 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
-#define _ASM_MICROBLAZE_DMA_MAPPING_H
-
-#include <asm/cacheflush.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-struct scatterlist;
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-/* FIXME */
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	enum dma_data_direction direction)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-		enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-		enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, int flag)
-{
-	return NULL; /* consistent_alloc(flag, size, dma_handle); */
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-			void *vaddr, dma_addr_t dma_handle)
-{
-	BUG();
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	switch (direction) {
-	case DMA_FROM_DEVICE:
-		flush_dcache_range((unsigned)dma_addr,
-			(unsigned)dma_addr + size);
-			/* Fall through */
-	case DMA_TO_DEVICE:
-		break;
-	default:
-		BUG();
-	}
-}
-
-#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
+#include <asm-generic/dma-mapping-broken.h>
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
index 0967fa04fc5..08c073badf1 100644
--- a/arch/microblaze/include/asm/dma.h
+++ b/arch/microblaze/include/asm/dma.h
@@ -9,8 +9,13 @@
 #ifndef _ASM_MICROBLAZE_DMA_H
 #define _ASM_MICROBLAZE_DMA_H
 
+#ifndef CONFIG_MMU
 /* we don't have dma address limit. define it as zero to be
  * unlimited. */
 #define MAX_DMA_ADDRESS		(0)
+#else
+/* Virtual address corresponding to last available physical memory address.  */
+#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
+#endif
 
 #endif /* _ASM_MICROBLAZE_DMA_H */
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
index 81337f24134..f92fc0dda00 100644
--- a/arch/microblaze/include/asm/elf.h
+++ b/arch/microblaze/include/asm/elf.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -27,4 +29,95 @@
  */
 #define ELF_CLASS	ELFCLASS32
 
+#ifndef __uClinux__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/byteorder.h>
+
+#ifndef ELF_GREG_T
+#define ELF_GREG_T
+typedef unsigned long elf_greg_t;
+#endif
+
+#ifndef ELF_NGREG
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+#endif
+
+#ifndef ELF_GREGSET_T
+#define ELF_GREGSET_T
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#endif
+
+#ifndef ELF_FPREGSET_T
+#define ELF_FPREGSET_T
+
+/* TBD */
+#define ELF_NFPREG	33	/* includes fsr */
+typedef unsigned long elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* typedef struct user_fpu_struct elf_fpregset_t; */
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+
+#define ELF_CORE_COPY_REGS(_dest, _regs)			\
+	memcpy((char *) &_dest, (char *) _regs,		\
+	sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+/* Added _f parameter. Is this definition correct: TBD */
+#define ELF_PLAT_INIT(_r, _f)				\
+do {							\
+	_r->r1 =  _r->r1 =  _r->r2 =  _r->r3 =		\
+	_r->r4 =  _r->r5 =  _r->r6 =  _r->r7 =		\
+	_r->r8 =  _r->r9 =  _r->r10 = _r->r11 =		\
+	_r->r12 = _r->r13 = _r->r14 = _r->r15 =		\
+	_r->r16 = _r->r17 = _r->r18 = _r->r19 =		\
+	_r->r20 = _r->r21 = _r->r22 = _r->r23 =		\
+	_r->r24 = _r->r25 = _r->r26 = _r->r27 =		\
+	_r->r28 = _r->r29 = _r->r30 = _r->r31 =		\
+	0;						\
+} while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __uClinux__ */
+
 #endif /* _ASM_MICROBLAZE_ELF_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index e4c3aef884d..61abbd23264 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -1,8 +1,8 @@
 /*
  * Definitions used by low-level trap handlers
  *
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2007 - 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -31,7 +31,40 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
 # endif /* __ASSEMBLY__ */
 
+#ifndef CONFIG_MMU
+
 /* noMMU hasn't any space for args */
 # define STATE_SAVE_ARG_SPACE	(0)
 
+#else /* CONFIG_MMU */
+
+/* If true, system calls save and restore all registers (except result
+ * registers, of course).  If false, then `call clobbered' registers
+ * will not be preserved, on the theory that system calls are basically
+ * function calls anyway, and the caller should be able to deal with it.
+ * This is a security risk, of course, as `internal' values may leak out
+ * after a system call, but that certainly doesn't matter very much for
+ * a processor with no MMU protection!  For a protected-mode kernel, it
+ * would be faster to just zero those registers before returning.
+ *
+ * I can not rely on the glibc implementation. If you turn it off make
+ * sure that r11/r12 is saved in user-space. --KAA
+ *
+ * These are special variables using by the kernel trap/interrupt code
+ * to save registers in, at a time when there are no spare registers we
+ * can use to do so, and we can't depend on the value of the stack
+ * pointer.  This means that they must be within a signed 16-bit
+ * displacement of 0x00000000.
+ */
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+ * suitable for a function call stack frame. */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+ * C calling conventions, in addition to the space used by the struct
+ * pt_regs that actually holds saved values. */
+#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments */
+
+#endif /* CONFIG_MMU */
+
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 24ca540e77c..90731df9e57 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -1,8 +1,8 @@
 /*
  * Preliminary support for HW exception handing for Microblaze
  *
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -64,21 +64,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#if defined(CONFIG_XMON)
-extern void xmon(struct pt_regs *regs);
-extern int xmon_bpt(struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
-extern int xmon_dabr_match(struct pt_regs *regs);
-extern void (*xmon_fault_handler)(struct pt_regs *regs);
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data);
+int bad_trap(int trap_num, struct pt_regs *regs);
+int debug_trap(struct pt_regs *regs);
+#endif /* CONFIG_MMU */
 
-void (*debugger)(struct pt_regs *regs) = xmon;
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#elif defined(CONFIG_KGDB)
+#if defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);
 int (*debugger_sstep)(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h
index acf0da543ef..6847c1512c7 100644
--- a/arch/microblaze/include/asm/flat.h
+++ b/arch/microblaze/include/asm/flat.h
@@ -13,7 +13,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp) /* nothing needed */
 #define	flat_argvp_envp_on_stack()	0
 #define	flat_old_ram_flag(flags)	(flags)
 #define	flat_reloc_valid(reloc, size)	((reloc) <= (size))
diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
index ea04632399d..2345ac354d9 100644
--- a/arch/microblaze/include/asm/gpio.h
+++ b/arch/microblaze/include/asm/gpio.h
@@ -11,8 +11,8 @@
  * (at your option) any later version.
  */
 
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
+#ifndef _ASM_MICROBLAZE_GPIO_H
+#define _ASM_MICROBLAZE_GPIO_H
 
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
@@ -53,4 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* CONFIG_GPIOLIB */
 
-#endif /* __ASM_POWERPC_GPIO_H */
+#endif /* _ASM_MICROBLAZE_GPIO_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 8b5853ee6b5..5c173424d07 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -12,6 +14,9 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/mm.h>          /* Get struct page {...} */
+
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
@@ -112,6 +117,30 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
 #define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
 
+#ifdef CONFIG_MMU
+
+#define mm_ptov(addr)		((void *)__phys_to_virt(addr))
+#define mm_vtop(addr)		((unsigned long)__virt_to_phys(addr))
+#define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
+#define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
+#define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
+
+#define __page_address(page) \
+		(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
+#define page_to_bus(page)	(page_to_phys(page))
+#define bus_to_virt(addr)	(phys_to_virt(addr))
+
+extern void iounmap(void *addr);
+/*extern void *__ioremap(phys_addr_t address, unsigned long size,
+		unsigned long flags);*/
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_nocache(addr, size)      ioremap((addr), (size))
+#define ioremap_fullcache(addr, size)    ioremap((addr), (size))
+
+#else /* CONFIG_MMU */
+
 /**
  *	virt_to_phys - map virtual addresses to physical
  *	@address: address to remap
@@ -160,6 +189,8 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define iounmap(addr)		((void)0)
 #define ioremap_nocache(physaddr, size)	ioremap(physaddr, size)
 
+#endif /* CONFIG_MMU */
+
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 0e0431d6163..66cad6a99d7 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,11 +11,109 @@
 #ifndef _ASM_MICROBLAZE_MMU_H
 #define _ASM_MICROBLAZE_MMU_H
 
-#ifndef __ASSEMBLY__
+# ifndef CONFIG_MMU
+#  ifndef __ASSEMBLY__
 typedef struct {
 	struct vm_list_struct	*vmlist;
 	unsigned long		end_brk;
 } mm_context_t;
-#endif /* __ASSEMBLY__ */
+#  endif /* __ASSEMBLY__ */
+# else /* CONFIG_MMU */
+#  ifdef __KERNEL__
+#   ifndef __ASSEMBLY__
 
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+	unsigned long    v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long    h:1;	/* Hash algorithm indicator */
+	unsigned long  api:6;	/* Abbreviated page index */
+	unsigned long  rpn:20;	/* Real (physical) page number */
+	unsigned long     :3;	/* Unused */
+	unsigned long    r:1;	/* Referenced */
+	unsigned long    c:1;	/* Changed */
+	unsigned long    w:1;	/* Write-thru cache mode */
+	unsigned long    i:1;	/* Cache inhibited */
+	unsigned long    m:1;	/* Memory coherence */
+	unsigned long    g:1;	/* Guarded */
+	unsigned long     :1;	/* Unused */
+	unsigned long   pp:2;	/* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#  define PP_RWXX	0 /* Supervisor read/write, User none */
+#  define PP_RWRX	1 /* Supervisor read/write, User read */
+#  define PP_RWRW	2 /* Supervisor read/write, User read/write */
+#  define PP_RXRX	3 /* Supervisor read,       User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+	unsigned long    t:1;	/* Normal or I/O  type */
+	unsigned long   ks:1;	/* Supervisor 'key' (normally 0) */
+	unsigned long   kp:1;	/* User 'key' (normally 1) */
+	unsigned long    n:1;	/* No-execute */
+	unsigned long     :4;	/* Unused */
+	unsigned long vsid:24;	/* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va);	/* invalidate a TLB entry */
+extern void _tlbia(void);		/* invalidate all TLB entries */
+#   endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+#  define MICROBLAZE_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+#  define TLB_LO		1
+#  define TLB_HI		0
+#  define TLB_DATA		TLB_LO
+#  define TLB_TAG		TLB_HI
+
+/* Tag portion */
+#  define TLB_EPN_MASK		0xFFFFFC00 /* Effective Page Number */
+#  define TLB_PAGESZ_MASK	0x00000380
+#  define TLB_PAGESZ(x)		(((x) & 0x7) << 7)
+#  define PAGESZ_1K		0
+#  define PAGESZ_4K		1
+#  define PAGESZ_16K		2
+#  define PAGESZ_64K		3
+#  define PAGESZ_256K		4
+#  define PAGESZ_1M		5
+#  define PAGESZ_4M		6
+#  define PAGESZ_16M		7
+#  define TLB_VALID		0x00000040 /* Entry is valid */
+
+/* Data portion */
+#  define TLB_RPN_MASK		0xFFFFFC00 /* Real Page Number */
+#  define TLB_PERM_MASK		0x00000300
+#  define TLB_EX		0x00000200 /* Instruction execution allowed */
+#  define TLB_WR		0x00000100 /* Writes permitted */
+#  define TLB_ZSEL_MASK		0x000000F0
+#  define TLB_ZSEL(x)		(((x) & 0xF) << 4)
+#  define TLB_ATTR_MASK		0x0000000F
+#  define TLB_W			0x00000008 /* Caching is write-through */
+#  define TLB_I			0x00000004 /* Caching is inhibited */
+#  define TLB_M			0x00000002 /* Memory is coherent */
+#  define TLB_G			0x00000001 /* Memory is guarded from prefetch */
+
+#  endif /* __KERNEL__ */
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_MMU_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 150ca01b74b..385fed16bbf 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,21 +1,5 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
+#ifdef CONFIG_MMU
+# include "mmu_context_mm.h"
+#else
+# include "mmu_context_no.h"
+#endif
diff --git a/arch/microblaze/include/asm/mmu_context_mm.h b/arch/microblaze/include/asm/mmu_context_mm.h
new file mode 100644
index 00000000000..3e5c254e8d1
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_mm.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm-generic/mm_hooks.h>
+
+# ifdef __KERNEL__
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.
+ */
+# define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   MicroBlaze has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+# define NO_CONTEXT	256
+# define LAST_CONTEXT	255
+# define FIRST_CONTEXT	1
+
+/*
+ * Set the current MMU context.
+ * This is done byloading up the segment registers for the user part of the
+ * address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * Since we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	mm_context_t ctx;
+
+	if (mm->context != NO_CONTEXT)
+		return;
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context = ctx;
+	context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+# define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != NO_CONTEXT) {
+		clear_bit(mm->context, context_map);
+		mm->context = NO_CONTEXT;
+		atomic_inc(&nr_free_contexts);
+	}
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	tsk->thread.pgdir = next->pgd;
+	get_mmu_context(next);
+	set_context(next->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *active_mm,
+			struct mm_struct *mm)
+{
+	current->thread.pgdir = mm->pgd;
+	get_mmu_context(mm);
+	set_context(mm->context, mm->pgd);
+}
+
+extern void mmu_context_init(void);
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
new file mode 100644
index 00000000000..ba556719015
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context_no.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+# define init_new_context(tsk, mm)		({ 0; })
+
+# define enter_lazy_tlb(mm, tsk)		do {} while (0)
+# define change_mm_context(old, ctx, _pml4)	do {} while (0)
+# define destroy_context(mm)			do {} while (0)
+# define deactivate_mm(tsk, mm)			do {} while (0)
+# define switch_mm(prev, next, tsk)		do {} while (0)
+# define activate_mm(prev, next)		do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 7238dcfcc51..72aceae8868 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -1,6 +1,8 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * VM ops
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  * Changes for MMU support:
  *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
@@ -15,14 +17,15 @@
 
 #include <linux/pfn.h>
 #include <asm/setup.h>
+#include <linux/const.h>
+
+#ifdef __KERNEL__
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-#ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
@@ -35,6 +38,7 @@
 /* align addr on a size boundary - adjust address up if needed */
 #define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
 
+#ifndef CONFIG_MMU
 /*
  * PAGE_OFFSET -- the first address of the first page of memory. When not
  * using MMU this corresponds to the first free page in physical memory (aligned
@@ -43,15 +47,44 @@
 extern unsigned int __page_offset;
 #define PAGE_OFFSET __page_offset
 
-#define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
-#define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)		free_page(addr)
+#else /* CONFIG_MMU */
 
-#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. With MMU
+ * it is set to the kernel start address (aligned on a page boundary).
+ *
+ * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
+ * in arch/microblaze/Makefile.
+ */
+#define PAGE_OFFSET	CONFIG_KERNEL_START
 
+/*
+ * MAP_NR -- given an address, calculate the index of the page struct which
+ * points to the address's page.
+ */
+#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
 
-#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
-#define copy_user_page(vto, vfrom, vaddr, topg) \
+/*
+ * The basic type of a PTE - 32 bit physical addressing.
+ */
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#define PTE_FMT		"%.8lx"
+
+#endif /* CONFIG_MMU */
+
+#  ifndef CONFIG_MMU
+#  define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+#  define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
+#  define free_user_page(page, addr)		free_page(addr)
+#  else /* CONFIG_MMU */
+extern void copy_page(void *to, void *from);
+#  endif /* CONFIG_MMU */
+
+# define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+
+# define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+# define copy_user_page(vto, vfrom, vaddr, topg) \
 			memcpy((vto), (vfrom), PAGE_SIZE)
 
 /*
@@ -60,21 +93,32 @@ extern unsigned int __page_offset;
 typedef struct page *pgtable_t;
 typedef struct { unsigned long	pte; }		pte_t;
 typedef struct { unsigned long	pgprot; }	pgprot_t;
+/* FIXME this can depend on linux kernel version */
+#   ifdef CONFIG_MMU
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#   else /* CONFIG_MMU */
 typedef struct { unsigned long	ste[64]; }	pmd_t;
 typedef struct { pmd_t		pue[1]; }	pud_t;
 typedef struct { pud_t		pge[1]; }	pgd_t;
+#   endif /* CONFIG_MMU */
 
+# define pte_val(x)	((x).pte)
+# define pgprot_val(x)	((x).pgprot)
 
-#define pte_val(x)	((x).pte)
-#define pgprot_val(x)	((x).pgprot)
-#define pmd_val(x)	((x).ste[0])
-#define pud_val(x)	((x).pue[0])
-#define pgd_val(x)	((x).pge[0])
+#   ifdef CONFIG_MMU
+#   define pmd_val(x)      ((x).pmd)
+#   define pgd_val(x)      ((x).pgd)
+#   else  /* CONFIG_MMU */
+#   define pmd_val(x)	((x).ste[0])
+#   define pud_val(x)	((x).pue[0])
+#   define pgd_val(x)	((x).pge[0])
+#   endif  /* CONFIG_MMU */
 
-#define __pte(x)	((pte_t) { (x) })
-#define __pmd(x)	((pmd_t) { (x) })
-#define __pgd(x)	((pgd_t) { (x) })
-#define __pgprot(x)	((pgprot_t) { (x) })
+# define __pte(x)	((pte_t) { (x) })
+# define __pmd(x)	((pmd_t) { (x) })
+# define __pgd(x)	((pgd_t) { (x) })
+# define __pgprot(x)	((pgprot_t) { (x) })
 
 /**
  * Conversions for virtual address, physical address, pfn, and struct
@@ -94,47 +138,83 @@ extern unsigned long max_low_pfn;
 extern unsigned long min_low_pfn;
 extern unsigned long max_pfn;
 
-#define __pa(vaddr)		((unsigned long) (vaddr))
-#define __va(paddr)		((void *) (paddr))
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern unsigned long memory_size;
 
-#define phys_to_pfn(phys)	(PFN_DOWN(phys))
-#define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
+extern int page_is_ram(unsigned long pfn);
 
-#define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
-#define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
+# define phys_to_pfn(phys)	(PFN_DOWN(phys))
+# define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
 
-#define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
-#define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+# define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
+# define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
 
-#define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
-#define page_to_bus(page)	(page_to_phys(page))
-#define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+#  ifdef CONFIG_MMU
+#  define virt_to_page(kaddr) 	(mem_map +  MAP_NR(kaddr))
+#  else /* CONFIG_MMU */
+#  define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
+#  define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+#  define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
+#  define page_to_bus(page)	(page_to_phys(page))
+#  define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+#  endif /* CONFIG_MMU */
 
-extern unsigned int memory_start;
-extern unsigned int memory_end;
-extern unsigned int memory_size;
+#  ifndef CONFIG_MMU
+#  define pfn_valid(pfn)	((pfn) >= min_low_pfn && (pfn) <= max_mapnr)
+#  define ARCH_PFN_OFFSET	(PAGE_OFFSET >> PAGE_SHIFT)
+#  else /* CONFIG_MMU */
+#  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
+#  define pfn_valid(pfn)	((pfn) < (max_mapnr + ARCH_PFN_OFFSET))
+#  define VALID_PAGE(page) 	((page - mem_map) < max_mapnr)
+#  endif /* CONFIG_MMU */
 
-#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+# endif /* __ASSEMBLY__ */
 
-#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+#define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
-#else
-#define tophys(rd, rs)	(addik rd, rs, 0)
-#define tovirt(rd, rs)	(addik rd, rs, 0)
-#endif /* __ASSEMBLY__ */
 
-#define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+#  ifndef CONFIG_MMU
+#  define __pa(vaddr)	((unsigned long) (vaddr))
+#  define __va(paddr)	((void *) (paddr))
+#  else /* CONFIG_MMU */
+#  define __pa(x)	__virt_to_phys((unsigned long)(x))
+#  define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
+#  endif /* CONFIG_MMU */
+
 
-/* Convert between virtual and physical address for MMU.  */
-/* Handle MicroBlaze processor with virtual memory.  */
+/* Convert between virtual and physical address for MMU. */
+/* Handle MicroBlaze processor with virtual memory. */
+#ifndef CONFIG_MMU
 #define __virt_to_phys(addr)	addr
 #define __phys_to_virt(addr)	addr
+#define tophys(rd, rs)	addik rd, rs, 0
+#define tovirt(rd, rs)	addik rd, rs, 0
+#else
+#define __virt_to_phys(addr) \
+	((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define __phys_to_virt(addr) \
+	((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#define tophys(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define tovirt(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#endif /* CONFIG_MMU */
 
 #define TOPHYS(addr)  __virt_to_phys(addr)
 
+#ifdef CONFIG_MMU
+#ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
+#define WANT_PAGE_VIRTUAL 1 /* page alloc 2 relies on this */
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif /* CONFIG_MMU */
+
 #endif /* __KERNEL__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_MICROBLAZE_PAGE_H */
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 2a4b3548401..59a757e46ba 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,195 @@
 #ifndef _ASM_MICROBLAZE_PGALLOC_H
 #define _ASM_MICROBLAZE_PGALLOC_H
 
+#ifdef CONFIG_MMU
+
+#include <linux/kernel.h>	/* For min/max macros */
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define PGDIR_ORDER	0
+
+/*
+ * This is handled very differently on MicroBlaze since out page tables
+ * are all 0's and I want to be able to use these zero'd pages elsewhere
+ * as well - it gives us quite a speedup.
+ * -- Cort
+ */
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+} quicklists;
+
+#define pgd_quicklist		(quicklists.pgd_cache)
+#define pmd_quicklist		((unsigned long *)0)
+#define pte_quicklist		(quicklists.pte_cache)
+#define pgtable_cache_size	(quicklists.pgtable_cache_sz)
+
+extern unsigned long *zero_cache; /* head linked list of pre-zero'd pages */
+extern atomic_t zero_sz; /* # currently pre-zero'd pages */
+extern atomic_t zeropage_hits; /* # zero'd pages request that we've done */
+extern atomic_t zeropage_calls; /* # zero'd pages request that've been made */
+extern atomic_t zerototal; /* # pages zero'd over time */
+
+#define zero_quicklist		(zero_cache)
+#define zero_cache_sz	 	(zero_sz)
+#define zero_cache_calls	(zeropage_calls)
+#define zero_cache_hits		(zeropage_hits)
+#define zero_cache_total	(zerototal)
+
+/*
+ * return a pre-zero'd page from the list,
+ * return NULL if none available -- Cort
+ */
+extern unsigned long get_zero_page_fast(void);
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern inline pgd_t *get_pgd_slow(void)
+{
+	pgd_t *ret;
+
+	ret = (pgd_t *)__get_free_pages(GFP_KERNEL, PGDIR_ORDER);
+	if (ret != NULL)
+		clear_page(ret);
+	return ret;
+}
+
+extern inline pgd_t *get_pgd_fast(void)
+{
+	unsigned long *ret;
+
+	ret = pgd_quicklist;
+	if (ret != NULL) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	} else
+		ret = (unsigned long *)get_pgd_slow();
+	return (pgd_t *)ret;
+}
+
+extern inline void free_pgd_fast(pgd_t *pgd)
+{
+	*(unsigned long **)pgd = pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	pgtable_cache_size++;
+}
+
+extern inline void free_pgd_slow(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+#define pgd_free(mm, pgd)        free_pgd_fast(pgd)
+#define pgd_alloc(mm)		get_pgd_fast()
+
+#define pmd_pgtable(pmd)	pmd_page(pmd)
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one_fast(mm, address)	({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
+/* FIXME two definition - look below */
+#define pmd_free(mm, x)			do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+		unsigned long address)
+{
+	pte_t *pte;
+	extern int mem_init_done;
+	extern void *early_get_page(void);
+	if (mem_init_done) {
+		pte = (pte_t *)__get_free_page(GFP_KERNEL |
+					__GFP_REPEAT | __GFP_ZERO);
+	} else {
+		pte = (pte_t *)early_get_page();
+		if (pte)
+			clear_page(pte);
+	}
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+		unsigned long address)
+{
+	struct page *ptepage;
+
+#ifdef CONFIG_HIGHPTE
+	int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+#else
+	int flags = GFP_KERNEL | __GFP_REPEAT;
+#endif
+
+	ptepage = alloc_pages(flags, 0);
+	if (ptepage)
+		clear_highpage(ptepage);
+	return ptepage;
+}
+
+static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm,
+		unsigned long address)
+{
+	unsigned long *ret;
+
+	ret = pte_quicklist;
+	if (ret != NULL) {
+		pte_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		pgtable_cache_size--;
+	}
+	return (pte_t *)ret;
+}
+
+extern inline void pte_free_fast(pte_t *pte)
+{
+	*(unsigned long **)pte = pte_quicklist;
+	pte_quicklist = (unsigned long *) pte;
+	pgtable_cache_size++;
+}
+
+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+extern inline void pte_free_slow(struct page *ptepage)
+{
+	__free_page(ptepage);
+}
+
+extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+{
+	__free_page(ptepage);
+}
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+
+#define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = page_address(pte))
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		(pmd_val(*(pmd)) = (unsigned long) (pte))
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
+/*#define pmd_free(mm, x)			do { } while (0)*/
+#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define pgd_populate(mm, pmd, pte)	BUG()
+
+extern int do_check_pgt_cache(int, int);
+
+#endif /* CONFIG_MMU */
+
 #define check_pgt_cache()	do {} while (0)
 
 #endif /* _ASM_MICROBLAZE_PGALLOC_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4df31e46568..4c57a586a98 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,8 @@
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#ifndef CONFIG_MMU
+
 #define pgd_present(pgd)	(1) /* pages are always present on non MMU */
 #define pgd_none(pgd)		(0)
 #define pgd_bad(pgd)		(0)
@@ -27,6 +31,8 @@
 #define PAGE_READONLY		__pgprot(0) /* these mean nothing to non MMU */
 #define PAGE_KERNEL		__pgprot(0) /* these mean nothing to non MMU */
 
+#define pgprot_noncached(x)	(x)
+
 #define __swp_type(x)		(0)
 #define __swp_offset(x)		(0)
 #define __swp_entry(typ, off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
@@ -45,6 +51,538 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 #define arch_enter_lazy_cpu_mode()	do {} while (0)
 
+#else /* CONFIG_MMU */
+
+#include <asm-generic/4level-fixup.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+#define FIRST_USER_ADDRESS	0
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+/* Start and end of the vmalloc area. */
+/* Make sure to map the vmalloc area above the pinned kernel memory area
+   of 32Mb.  */
+#define VMALLOC_START	(CONFIG_KERNEL_START + \
+				max(32 * 1024 * 1024UL, memory_size))
+#define VMALLOC_END	ioremap_bot
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
+ * table containing PTEs, together with a set of 16 segment registers, to
+ * define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ */
+
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	PMD_SHIFT
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_PGD_NR	0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
+		__FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
+		__FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+		__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PTE as closely as possible.
+ */
+
+/* There are several potential gotchas here.  The hardware TLBLO
+ * field looks like this:
+ *
+ * 0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap cache
+ * entries use the top 30 bits.  Because 4xx doesn't support SMP
+ * anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+ * is cleared in the TLB miss handler before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ *  * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits.  We actually use use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+/* Definitions for MicroBlaze. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+#define _PMD_PRESENT	PAGE_MASK
+
+/*
+ * Some bits are unused...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK	0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+
+#define _PAGE_KERNEL \
+	(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X \
+		__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_SHARED)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_IO)
+
+/*
+ * We consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep) \
+	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define	pmd_present(pmd)	((pmd_val(pmd) & _PMD_PRESENT) != 0)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#define pte_page(x)		(mem_map + (unsigned long) \
+				((pte_val(x) - memory_start) >> PAGE_SHIFT))
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) | pgprot_val(prot))
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+#define pgd_clear(xp)				do { } while (0)
+#define pgd_page(pgd) \
+	((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+/* FIXME */
+static inline int pte_file(pte_t pte)		{ return 0; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) \
+		{ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = physpage | pgprot_val(pgprot);
+	return pte;
+}
+
+#define mk_pte(page, pgprot) \
+({									   \
+	pte_t pte;							   \
+	pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) |  \
+			pgprot_val(pgprot);				   \
+	pte;								   \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+				unsigned long set)
+{
+	unsigned long old, tmp, msr;
+
+	__asm__ __volatile__("\
+	msrclr	%2, 0x2\n\
+	nop\n\
+	lw	%0, %4, r0\n\
+	andn	%1, %0, %5\n\
+	or	%1, %1, %6\n\
+	sw	%1, %4, r0\n\
+	mts     rmsr, %2\n\
+	nop"
+	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
+	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc");
+
+	return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte(struct mm_struct *mm, unsigned long addr,
+		pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+		pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline int ptep_test_and_clear_young(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
+}
+
+static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, \
+		(_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}*/
+
+static inline void ptep_mkdirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, 0, _PAGE_DIRTY);
+}
+
+/*#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
+
+/* Convert pmd entry to page */
+/* our pmd entry is an effective address of pte table*/
+/* returns effective address of the pmd entry*/
+#define pmd_page_kernel(pmd)	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+
+/* returns struct *page of the pmd entry*/
+#define pmd_page(pmd)	(pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) })
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_page is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit
+ * (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 6)
+#define __swp_entry(type, offset) \
+		((swp_entry_t) { (type) | ((offset) << 6) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
+
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk(unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+/* extern unsigned long mm_ptov(unsigned long addr) \
+	__attribute__ ((const)); TBD */
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ * compilation errors.
+ */
+#define	IOMAP_FULL_CACHING	0
+#define	IOMAP_NOCACHE_SER	1
+#define	IOMAP_NOCACHE_NONSER	2
+#define	IOMAP_NO_COPYBACK	3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+				int nocacheflag, unsigned long *memavailp);
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode(unsigned long address, unsigned long size,
+				unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_page_range remap_page_range
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code);
+
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags);
+
+void __init adjust_total_lowmem(void);
+void mapin_ram(void);
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+extern int mem_init_done;
+extern unsigned long ioremap_base;
+extern unsigned long ioremap_bot;
+
+asmlinkage void __init mmu_init(void);
+
+void __init *early_get_page(void);
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_MMU */
+
 #ifndef __ASSEMBLY__
 #include <asm-generic/pgtable.h>
 
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index b4df41c5dde..8c758b231f3 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -16,7 +16,7 @@
  */
 
 typedef unsigned long	__kernel_ino_t;
-typedef unsigned int	__kernel_mode_t;
+typedef unsigned short	__kernel_mode_t;
 typedef unsigned int	__kernel_nlink_t;
 typedef long		__kernel_off_t;
 typedef int		__kernel_pid_t;
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 9329029d261..563c6b9453f 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -26,14 +26,15 @@ extern const struct seq_operations cpuinfo_op;
 # define cpu_sleep()		do {} while (0)
 # define prepare_to_copy(tsk)	do {} while (0)
 
-# endif /* __ASSEMBLY__ */
-
 #define task_pt_regs(tsk) \
 		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
 
 /* Do necessary setup to start up a newly executed thread. */
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
 
+# endif /* __ASSEMBLY__ */
+
+# ifndef CONFIG_MMU
 /*
  * User space process size: memory size
  *
@@ -85,4 +86,90 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 # define KSTK_EIP(tsk)	(0)
 # define KSTK_ESP(tsk)	(0)
 
+# else /* CONFIG_MMU */
+
+/*
+ * This is used to define STACK_TOP, and with MMU it must be below
+ * kernel base to select the correct PGD when handling MMU exceptions.
+ */
+# define TASK_SIZE	(CONFIG_KERNEL_START)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+# define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+
+# define THREAD_KSP	0
+
+#  ifndef __ASSEMBLY__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#  define current_text_addr()	({ __label__ _l; _l: &&_l; })
+
+/* If you change this, you must change the associated assembly-languages
+ * constants defined below, THREAD_*.
+ */
+struct thread_struct {
+	/* kernel stack pointer (must be first field in structure) */
+	unsigned long	ksp;
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+	void		*pgdir;		/* root of page-table tree */
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+};
+
+#  define INIT_THREAD { \
+	.ksp   = sizeof init_stack + (unsigned long)init_stack, \
+	.pgdir = swapper_pg_dir, \
+}
+
+/* Do necessary setup to start up a newly executed thread.  */
+void start_thread(struct pt_regs *regs,
+		unsigned long pc, unsigned long usp);
+
+/* Free all resources held by a thread. */
+extern inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Free current thread data structures etc.  */
+static inline void exit_thread(void)
+{
+}
+
+/* Return saved (kernel) PC of a blocked thread.  */
+#  define thread_saved_pc(tsk)	\
+	((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* The size allocated for kernel stacks. This _must_ be a power of two! */
+# define KERNEL_STACK_SIZE	0x2000
+
+/* Return some info about the user process TASK.  */
+#  define task_tos(task)	((unsigned long)(task) + KERNEL_STACK_SIZE)
+#  define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
+
+#  define task_pt_regs_plus_args(tsk) \
+	(((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE)
+
+#  define task_sp(task)	(task_regs(task)->r1)
+#  define task_pc(task)	(task_regs(task)->pc)
+/* Grotty old names for some.  */
+#  define KSTK_EIP(task)	(task_pc(task))
+#  define KSTK_ESP(task)	(task_sp(task))
+
+/* FIXME */
+#  define deactivate_mm(tsk, mm)	do { } while (0)
+
+#  define STACK_TOP	TASK_SIZE
+#  define STACK_TOP_MAX	STACK_TOP
+
+#  endif /* __ASSEMBLY__ */
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index 55015bce5e4..a917dc51773 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -10,7 +10,6 @@
 #define _ASM_MICROBLAZE_PTRACE_H
 
 #ifndef __ASSEMBLY__
-#include <linux/types.h>
 
 typedef unsigned long microblaze_reg_t;
 
diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h
index 834142d9356..68c3afb7387 100644
--- a/arch/microblaze/include/asm/registers.h
+++ b/arch/microblaze/include/asm/registers.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -30,4 +30,21 @@
 #define FSR_UF		(1<<1) /* Underflow */
 #define FSR_DO		(1<<0) /* Denormalized operand error */
 
+# ifdef CONFIG_MMU
+/* Machine State Register (MSR) Fields */
+# define MSR_UM		(1<<11) /* User Mode */
+# define MSR_UMS	(1<<12) /* User Mode Save */
+# define MSR_VM		(1<<13) /* Virtual Mode */
+# define MSR_VMS	(1<<14) /* Virtual Mode Save */
+
+# define MSR_KERNEL	(MSR_EE | MSR_VM)
+/* # define MSR_USER	(MSR_KERNEL | MSR_UM | MSR_IE) */
+# define MSR_KERNEL_VMS	(MSR_EE | MSR_VMS)
+/* # define MSR_USER_VMS	(MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
+
+/* Exception State Register (ESR) Fields */
+# define	  ESR_DIZ	(1<<11) /* Zone Protection */
+# define	  ESR_S		(1<<10) /* Store instruction */
+
+# endif /* CONFIG_MMU */
 #endif /* _ASM_MICROBLAZE_REGISTERS_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index 8434a43e542..4487e150b45 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,6 +16,7 @@
 # ifndef __ASSEMBLY__
 extern char _ssbss[], _esbss[];
 extern unsigned long __ivt_start[], __ivt_end[];
+extern char _etext[], _stext[];
 
 #  ifdef CONFIG_MTD_UCLINUX
 extern char *_ebss;
diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h
index 7f5dcc56eea..0e7102c3fb1 100644
--- a/arch/microblaze/include/asm/segment.h
+++ b/arch/microblaze/include/asm/segment.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2008 Michal Simek
- * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_SEGMENT_H
 #define _ASM_MICROBLAZE_SEGMENT_H
 
-#ifndef __ASSEMBLY__
+# ifndef __ASSEMBLY__
 
 typedef struct {
 	unsigned long seg;
@@ -29,15 +29,21 @@ typedef struct {
  *
  * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
  */
-#  define KERNEL_DS	((mm_segment_t){0})
+# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
+
+#  ifndef CONFIG_MMU
+#  define KERNEL_DS	MAKE_MM_SEG(0)
 #  define USER_DS	KERNEL_DS
+#  else
+#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
+#  endif
 
 # define get_ds()	(KERNEL_DS)
 # define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(x) \
-		do { current_thread_info()->addr_limit = (x); } while (0)
+# define set_fs(val)	(current_thread_info()->addr_limit = (val))
 
-# define segment_eq(a, b)		((a).seg == (b).seg)
+# define segment_eq(a, b)	((a).seg == (b).seg)
 
 # endif /* __ASSEMBLY__ */
 #endif /* _ASM_MICROBLAZE_SEGMENT_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index 9b98e8e6aba..27f8dafd8c3 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -18,7 +19,6 @@
 extern unsigned int boot_cpuid; /* move to smp.h */
 
 extern char cmd_line[COMMAND_LINE_SIZE];
-#  endif/* __KERNEL__ */
 
 void early_printk(const char *fmt, ...);
 
@@ -30,6 +30,11 @@ void setup_heartbeat(void);
 
 unsigned long long sched_clock(void);
 
+#   ifdef CONFIG_MMU
+extern void mmu_reset(void);
+extern void early_console_reg_tlb_alloc(unsigned int addr);
+#   endif /* CONFIG_MMU */
+
 void time_init(void);
 void init_IRQ(void);
 void machine_early_init(const char *cmdline, unsigned int ram,
@@ -40,5 +45,6 @@ void machine_shutdown(void);
 void machine_halt(void);
 void machine_power_off(void);
 
+#  endif/* __KERNEL__ */
 # endif /* __ASSEMBLY__ */
 #endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 9676fad3486..46bc2267d94 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -90,7 +90,7 @@
 
 # ifndef __ASSEMBLY__
 # include <linux/types.h>
-# include <asm-generic/signal.h>
+# include <asm-generic/signal-defs.h>
 
 /* Avoid too many header ordering problems. */
 struct siginfo;
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index 5f18b8aed22..a15f77520bf 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -16,58 +16,53 @@
 
 #include <linux/posix_types.h>
 
+#define STAT_HAVE_NSEC 1
+
 struct stat {
-	unsigned int	st_dev;
+	unsigned long	st_dev;
 	unsigned long	st_ino;
 	unsigned int	st_mode;
 	unsigned int	st_nlink;
 	unsigned int	st_uid;
 	unsigned int	st_gid;
-	unsigned int	st_rdev;
-	unsigned long	st_size;
-	unsigned long	st_blksize;
-	unsigned long	st_blocks;
-	unsigned long	st_atime;
-	unsigned long	__unused1; /* unsigned long  st_atime_nsec */
-	unsigned long	st_mtime;
-	unsigned long	__unused2; /* unsigned long  st_mtime_nsec */
-	unsigned long	st_ctime;
-	unsigned long	__unused3; /* unsigned long  st_ctime_nsec */
+	unsigned long	st_rdev;
+	unsigned long	__pad1;
+	long		st_size;
+	int		st_blksize;
+	int		__pad2;
+	long		st_blocks;
+	int		st_atime;
+	unsigned int	st_atime_nsec;
+	int		st_mtime;
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;
+	unsigned int	st_ctime_nsec;
 	unsigned long	__unused4;
 	unsigned long	__unused5;
 };
 
 struct stat64 {
-	unsigned long long	st_dev;
-	unsigned long	__unused1;
-
-	unsigned long long	st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned long	__unused3;
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
-	unsigned long	__unused4; /* future possible st_blocks high bits */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long	__unused8;
+	unsigned long long	st_dev;		/* Device.  */
+	unsigned long long	st_ino;		/* File serial number.  */
+	unsigned int		st_mode;	/* File mode.  */
+	unsigned int		st_nlink;	/* Link count.  */
+	unsigned int		st_uid;		/* User ID of the file's owner.  */
+	unsigned int		st_gid;		/* Group ID of the file's group. */
+	unsigned long long	st_rdev;	/* Device number, if device.  */
+	unsigned long long	__pad1;
+	long long		st_size;	/* Size of file, in bytes.  */
+	int			st_blksize;	/* Optimal block size for I/O.  */
+	int			__pad2;
+	long long		st_blocks;	/* Number 512-byte blocks allocated. */
+	int			st_atime;	/* Time of last access.  */
+	unsigned int		st_atime_nsec;
+	int			st_mtime;	/* Time of last modification.  */
+	unsigned int		st_mtime_nsec;
+	int			st_ctime;	/* Time of last status change.  */
+	unsigned int		st_ctime_nsec;
+	unsigned int		__unused4;
+	unsigned int		__unused5;
 };
 
 #endif /* _ASM_MICROBLAZE_STAT_H */
+
diff --git a/arch/microblaze/include/asm/string.h b/arch/microblaze/include/asm/string.h
index f7728c90fc1..aec2f59298b 100644
--- a/arch/microblaze/include/asm/string.h
+++ b/arch/microblaze/include/asm/string.h
@@ -9,7 +9,7 @@
 #ifndef _ASM_MICROBLAZE_STRING_H
 #define _ASM_MICROBLAZE_STRING_H
 
-#ifndef __KERNEL__
+#ifdef __KERNEL__
 
 #define __HAVE_ARCH_MEMSET
 #define __HAVE_ARCH_MEMCPY
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index 9cb4ff0edeb..ddea9eb31f8 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -34,6 +34,9 @@ asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
 asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
 		struct old_sigaction *oact);
 
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+
 asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs);
 
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 102d7725866..47a46d1fbe2 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -81,7 +81,7 @@ struct termio {
 
 #ifdef __KERNEL__
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 4c3943e3f40..7fac4449844 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -122,6 +122,8 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SINGLESTEP		4
 #define TIF_IRET		5 /* return with iret */
 #define TIF_MEMDIE		6
+#define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
+#define TIF_SECCOMP		10      /* secure computing */
 #define TIF_FREEZE		14	/* Freezing for suspend */
 
 /* FIXME change in entry.S */
@@ -138,10 +140,17 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_IRET		(1<<TIF_IRET)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_KERNEL_TRACE	(1 << TIF_KERNEL_TRACE)
 
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK  (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		0x0000FFFE
+
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	0x0000FFFF
 
@@ -154,6 +163,17 @@ static inline struct thread_info *current_thread_info(void)
  */
 /* FPU was used by this task this quantum (SMP) */
 #define TS_USEDFPU		0x0001
+#define TS_RESTORE_SIGMASK	0x0002
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index d1dfe379112..c472d280113 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -13,4 +15,10 @@
 
 #include <asm-generic/tlb.h>
 
+#ifdef CONFIG_MMU
+#define tlb_start_vma(tlb, vma)		do { } while (0)
+#define tlb_end_vma(tlb, vma)		do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_TLB_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index d7fe7629001..eb31a0e8a77 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,6 +11,50 @@
 #ifndef _ASM_MICROBLAZE_TLBFLUSH_H
 #define _ASM_MICROBLAZE_TLBFLUSH_H
 
+#ifdef CONFIG_MMU
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>	/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#define __tlbia()	_tlbia()
+
+static inline void local_flush_tlb_all(void)
+	{ __tlbia(); }
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ _tlbie(vmaddr); }
+static inline void local_flush_tlb_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+	{ __tlbia(); }
+
+#define flush_tlb_kernel_range(start, end)	do { } while (0)
+
+#define update_mmu_cache(vma, addr, pte)	do { } while (0)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages.  We don't need to do anything here, there's nothing special
+ * about our page-table pages.  -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+	unsigned long start, unsigned long end) { }
+
+#else /* CONFIG_MMU */
+
 #define flush_tlb()				BUG()
 #define flush_tlb_all()				BUG()
 #define flush_tlb_mm(mm)			BUG()
@@ -17,4 +63,6 @@
 #define flush_tlb_pgtables(mm, start, end)	BUG()
 #define flush_tlb_kernel_range(start, end)	BUG()
 
+#endif /* CONFIG_MMU */
+
 #endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 5a3ffc308e1..65adad61e7e 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -26,6 +28,10 @@
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
+#define __clear_user(addr, n)	(memset((void *)(addr), 0, (n)), 0)
+
+#ifndef CONFIG_MMU
+
 extern int ___range_ok(unsigned long addr, unsigned long size);
 
 #define __range_ok(addr, size) \
@@ -34,68 +40,68 @@ extern int ___range_ok(unsigned long addr, unsigned long size);
 #define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 #define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
 
-extern inline int bad_user_access_length(void)
-{
-	return 0;
-}
+/* Undefined function to trigger linker error */
+extern int bad_user_access_length(void);
+
 /* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr)					\
-	({							\
-		int __gu_err = 0;				\
-		switch (sizeof(*(ptr))) {			\
-		case 1:						\
-		case 2:						\
-		case 4:						\
-			(var) = *(ptr);				\
-			break;					\
-		case 8:						\
-			memcpy((void *) &(var), (ptr), 8);	\
-			break;					\
-		default:					\
-			(var) = 0;				\
-			__gu_err = __get_user_bad();		\
-			break;					\
-		}						\
-		__gu_err;					\
-	})
+#define __get_user(var, ptr)				\
+({							\
+	int __gu_err = 0;				\
+	switch (sizeof(*(ptr))) {			\
+	case 1:						\
+	case 2:						\
+	case 4:						\
+		(var) = *(ptr);				\
+		break;					\
+	case 8:						\
+		memcpy((void *) &(var), (ptr), 8);	\
+		break;					\
+	default:					\
+		(var) = 0;				\
+		__gu_err = __get_user_bad();		\
+		break;					\
+	}						\
+	__gu_err;					\
+})
 
 #define __get_user_bad()	(bad_user_access_length(), (-EFAULT))
 
+/* FIXME is not there defined __pu_val */
 #define __put_user(var, ptr)					\
-	({							\
-		int __pu_err = 0;				\
-		switch (sizeof(*(ptr))) {			\
-		case 1:						\
-		case 2:						\
-		case 4:						\
-			*(ptr) = (var);				\
-			break;					\
-		case 8: {					\
-			typeof(*(ptr)) __pu_val = var;		\
-			memcpy(ptr, &__pu_val, sizeof(__pu_val));\
-			}					\
-			break;					\
-		default:					\
-			__pu_err = __put_user_bad();		\
-			break;					\
-		}							\
-		__pu_err;						\
-	})
+({								\
+	int __pu_err = 0;					\
+	switch (sizeof(*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+		*(ptr) = (var);					\
+		break;						\
+	case 8: {						\
+		typeof(*(ptr)) __pu_val = (var);		\
+		memcpy(ptr, &__pu_val, sizeof(__pu_val));	\
+		}						\
+		break;						\
+	default:						\
+		__pu_err = __put_user_bad();			\
+		break;						\
+	}							\
+	__pu_err;						\
+})
 
 #define __put_user_bad()	(bad_user_access_length(), (-EFAULT))
 
-#define put_user(x, ptr)	__put_user(x, ptr)
-#define get_user(x, ptr)	__get_user(x, ptr)
+#define put_user(x, ptr)	__put_user((x), (ptr))
+#define get_user(x, ptr)	__get_user((x), (ptr))
 
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)	(memcpy((to), (from), (n)), 0)
+#define copy_from_user(to, from, n)	(memcpy((to), (from), (n)), 0)
 
-#define __copy_to_user(to, from, n)		(copy_to_user(to, from, n))
-#define __copy_from_user(to, from, n)		(copy_from_user(to, from, n))
-#define __copy_to_user_inatomic(to, from, n)	(__copy_to_user(to, from, n))
-#define __copy_from_user_inatomic(to, from, n)	(__copy_from_user(to, from, n))
-
-#define __clear_user(addr, n)	(memset((void *)addr, 0, n), 0)
+#define __copy_to_user(to, from, n)	(copy_to_user((to), (from), (n)))
+#define __copy_from_user(to, from, n)	(copy_from_user((to), (from), (n)))
+#define __copy_to_user_inatomic(to, from, n) \
+			(__copy_to_user((to), (from), (n)))
+#define __copy_from_user_inatomic(to, from, n) \
+			(__copy_from_user((to), (from), (n)))
 
 static inline unsigned long clear_user(void *addr, unsigned long size)
 {
@@ -104,13 +110,200 @@ static inline unsigned long clear_user(void *addr, unsigned long size)
 	return size;
 }
 
-/* Returns 0 if exception not found and fixup otherwise. */
+/* Returns 0 if exception not found and fixup otherwise.  */
 extern unsigned long search_exception_table(unsigned long);
 
+extern long strncpy_from_user(char *dst, const char *src, long count);
+extern long strnlen_user(const char *src, long count);
+
+#else /* CONFIG_MMU */
+
+/*
+ * Address is valid if:
+ *  - "addr", "addr + size" and "size" are all below the limit
+ */
+#define access_ok(type, addr, size) \
+	(get_fs().seg > (((unsigned long)(addr)) | \
+		(size) | ((unsigned long)(addr) + (size))))
+
+/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
+ type?"WRITE":"READ",addr,size,get_fs().seg)) */
+
+/*
+ * All the __XXX versions macros/functions below do not perform
+ * access checking. It is assumed that the necessary checks have been
+ * already performed before the finction (macro) is called.
+ */
+
+#define get_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
+		? __get_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define put_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
+		? __put_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define __get_user(x, ptr)						\
+({									\
+	unsigned long __gu_val;						\
+	/*unsigned long __gu_ptr = (unsigned long)(ptr);*/		\
+	long __gu_err;							\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_asm("lbu", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2:								\
+		__get_user_asm("lhu", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	default:							\
+		__gu_val = 0; __gu_err = -EINVAL;			\
+	}								\
+	x = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)		\
+({									\
+	__asm__ __volatile__ (						\
+			"1:"	insn	" %1, %2, r0;			\
+				addk	%0, r0, r0;			\
+			2:						\
+			.section .fixup,\"ax\";				\
+			3:	brid	2b;				\
+				addik	%0, r0, %3;			\
+			.previous;					\
+			.section __ex_table,\"a\";			\
+			.word	1b,3b;					\
+			.previous;"					\
+		: "=r"(__gu_err), "=r"(__gu_val)			\
+		: "r"(__gu_ptr), "i"(-EFAULT)				\
+	);								\
+})
+
+#define __put_user(x, ptr)						\
+({									\
+	__typeof__(*(ptr)) __gu_val = x;				\
+	long __gu_err = 0;						\
+	switch (sizeof(__gu_val)) {					\
+	case 1:								\
+		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2: 							\
+		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__put_user_asm("sw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 8:								\
+		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
+		break;							\
+	default:							\
+		__gu_err = -EINVAL;					\
+	}								\
+	__gu_err;							\
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)	\
+({							\
+__asm__ __volatile__ ("	lwi	%0, %1, 0;		\
+		1:	swi	%0, %2, 0;		\
+			lwi	%0, %1, 4;		\
+		2:	swi	%0, %2, 4;		\
+			addk	%0,r0,r0;		\
+		3:					\
+		.section .fixup,\"ax\";			\
+		4:	brid	3b;			\
+			addik	%0, r0, %3;		\
+		.previous;				\
+		.section __ex_table,\"a\";		\
+		.word	1b,4b,2b,4b;			\
+		.previous;"				\
+	: "=&r"(__gu_err)				\
+	: "r"(&__gu_val),				\
+	"r"(__gu_ptr), "i"(-EFAULT)			\
+	);						\
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;		\
+				addk	%0, r0, r0;		\
+			2:					\
+			.section .fixup,\"ax\";			\
+			3:	brid	2b;			\
+				addik	%0, r0, %3;		\
+			.previous;				\
+			.section __ex_table,\"a\";		\
+			.word	1b,3b;				\
+			.previous;"				\
+		: "=r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
+})
+
+/*
+ * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
+ */
+static inline int clear_user(char *to, int size)
+{
+	if (size && access_ok(VERIFY_WRITE, to, size)) {
+		__asm__ __volatile__ ("				\
+				1:				\
+					sb	r0, %2, r0;	\
+					addik	%0, %0, -1;	\
+					bneid	%0, 1b;		\
+					addik	%2, %2, 1;	\
+				2:				\
+				.section __ex_table,\"a\";	\
+				.word	1b,2b;			\
+				.section .text;"		\
+			: "=r"(size)				\
+			: "0"(size), "r"(to)
+		);
+	}
+	return size;
+}
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#define copy_to_user(to, from, n)					\
+	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
+		__copy_tofrom_user((void __user *)(to),			\
+			(__force const void __user *)(from), (n))	\
+		: -EFAULT)
+
+#define __copy_to_user(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
+
+#define copy_from_user(to, from, n)					\
+	(access_ok(VERIFY_READ, (from), (n)) ?				\
+		__copy_tofrom_user((__force void __user *)(to),		\
+			(void __user *)(from), (n))			\
+		: -EFAULT)
+
+#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+		copy_from_user((to), (from), (n))
+
+extern int __strncpy_user(char *to, const char __user *from, int len);
+extern int __strnlen_user(const char __user *sstr, int len);
+
+#define strncpy_from_user(to, from, len)	\
+		(access_ok(VERIFY_READ, from, 1) ?	\
+			__strncpy_user(to, from, len) : -EFAULT)
+#define strnlen_user(str, len)	\
+		(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
 
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
-extern long strnlen_user(const char __user *src, long count);
-extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+#endif /* CONFIG_MMU */
 
 /*
  * The exception table consists of pairs of addresses: the first is the
diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h
index 9d66b640c91..3658d91ac0f 100644
--- a/arch/microblaze/include/asm/unaligned.h
+++ b/arch/microblaze/include/asm/unaligned.h
@@ -12,7 +12,8 @@
 
 # ifdef __KERNEL__
 
-# include <linux/unaligned/access_ok.h>
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
 # include <linux/unaligned/generic.h>
 
 # define get_unaligned	__get_unaligned_be
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index da94bec4ecb..f4a5e19a20e 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_SELFMOD)		+= selfmod.o
 obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
+obj-$(CONFIG_MMU)		+= misc.o
 
 obj-y	+= entry$(MMUEXT).o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index aabd9e9423a..7bc7b68f97d 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
@@ -68,16 +69,26 @@ int main(int argc, char *argv[])
 
 	/* struct task_struct */
 	DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+#ifdef CONFIG_MMU
+	DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	BLANK();
+
+	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+	BLANK();
+#endif
 
 	/* struct thread_info */
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
-	DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
 	BLANK();
 
diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
index 4b0f0fdb9ca..7de84923ba0 100644
--- a/arch/microblaze/kernel/early_printk.c
+++ b/arch/microblaze/kernel/early_printk.c
@@ -87,6 +87,9 @@ int __init setup_early_printk(char *opt)
 	base_addr = early_uartlite_console();
 	if (base_addr) {
 		early_console_initialized = 1;
+#ifdef CONFIG_MMU
+		early_console_reg_tlb_alloc(base_addr);
+#endif
 		early_printk("early_printk_console is enabled at 0x%08x\n",
 							base_addr);
 
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index f24b1268baa..1fce6b803f5 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -10,7 +10,7 @@
 
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
 #include <asm/registers.h>
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
new file mode 100644
index 00000000000..91a0e7b185d
--- /dev/null
+++ b/arch/microblaze/kernel/entry.S
@@ -0,0 +1,1116 @@
+/*
+ * Low-level system-call handling, trap handlers and context-switching
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003		John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001,2002	NEC Corporation
+ * Copyright (C) 2001,2002	Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Heavily modified by John Williams for Microblaze
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/exceptions.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/unistd.h>
+
+#include <linux/errno.h>
+#include <asm/signal.h>
+
+/* The size of a state save frame. */
+#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+/* The offset of the struct pt_regs in a `state save frame' on the stack. */
+#define PTO	STATE_SAVE_ARG_SPACE /* 24 the space for args */
+
+#define C_ENTRY(name)	.globl name; .align 4; name
+
+/*
+ * Various ways of setting and clearing BIP in flags reg.
+ * This is mucky, but necessary using microblaze version that
+ * allows msr ops to write to BIP
+ */
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+	.macro	clear_bip
+	msrclr	r11, MSR_BIP
+	nop
+	.endm
+
+	.macro	set_bip
+	msrset	r11, MSR_BIP
+	nop
+	.endm
+
+	.macro	clear_eip
+	msrclr	r11, MSR_EIP
+	nop
+	.endm
+
+	.macro	set_ee
+	msrset	r11, MSR_EE
+	nop
+	.endm
+
+	.macro	disable_irq
+	msrclr	r11, MSR_IE
+	nop
+	.endm
+
+	.macro	enable_irq
+	msrset	r11, MSR_IE
+	nop
+	.endm
+
+	.macro	set_ums
+	msrset	r11, MSR_UMS
+	nop
+	msrclr	r11, MSR_VMS
+	nop
+	.endm
+
+	.macro	set_vms
+	msrclr	r11, MSR_UMS
+	nop
+	msrset	r11, MSR_VMS
+	nop
+	.endm
+
+	.macro	clear_vms_ums
+	msrclr	r11, MSR_VMS
+	nop
+	msrclr	r11, MSR_UMS
+	nop
+	.endm
+#else
+	.macro	clear_bip
+	mfs	r11, rmsr
+	nop
+	andi	r11, r11, ~MSR_BIP
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	set_bip
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_BIP
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	clear_eip
+	mfs	r11, rmsr
+	nop
+	andi	r11, r11, ~MSR_EIP
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	set_ee
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_EE
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	disable_irq
+	mfs	r11, rmsr
+	nop
+	andi	r11, r11, ~MSR_IE
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	enable_irq
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_IE
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro set_ums
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_VMS
+	andni	r11, r11, MSR_UMS
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	set_vms
+	mfs	r11, rmsr
+	nop
+	ori	r11, r11, MSR_VMS
+	andni	r11, r11, MSR_UMS
+	mts	rmsr, r11
+	nop
+	.endm
+
+	.macro	clear_vms_ums
+	mfs	r11, rmsr
+	nop
+	andni	r11, r11, (MSR_VMS|MSR_UMS)
+	mts	rmsr,r11
+	nop
+	.endm
+#endif
+
+/* Define how to call high-level functions. With MMU, virtual mode must be
+ * enabled when calling the high-level function. Clobbers R11.
+ * VM_ON, VM_OFF, DO_JUMP_BIPCLR, DO_CALL
+ */
+
+/* turn on virtual protected mode save */
+#define VM_ON		\
+	set_ums;		\
+	rted	r0, 2f;	\
+2: nop;
+
+/* turn off virtual protected mode save and user mode save*/
+#define VM_OFF			\
+	clear_vms_ums;			\
+	rted	r0, TOPHYS(1f);	\
+1: nop;
+
+#define SAVE_REGS \
+	swi	r2, r1, PTO+PT_R2;	/* Save SDA */			\
+	swi	r5, r1, PTO+PT_R5;					\
+	swi	r6, r1, PTO+PT_R6;					\
+	swi	r7, r1, PTO+PT_R7;					\
+	swi	r8, r1, PTO+PT_R8;					\
+	swi	r9, r1, PTO+PT_R9;					\
+	swi	r10, r1, PTO+PT_R10;					\
+	swi	r11, r1, PTO+PT_R11;	/* save clobbered regs after rval */\
+	swi	r12, r1, PTO+PT_R12;					\
+	swi	r13, r1, PTO+PT_R13;	/* Save SDA2 */			\
+	swi	r14, r1, PTO+PT_PC;	/* PC, before IRQ/trap */	\
+	swi	r15, r1, PTO+PT_R15;	/* Save LP */			\
+	swi	r18, r1, PTO+PT_R18;	/* Save asm scratch reg */	\
+	swi	r19, r1, PTO+PT_R19;					\
+	swi	r20, r1, PTO+PT_R20;					\
+	swi	r21, r1, PTO+PT_R21;					\
+	swi	r22, r1, PTO+PT_R22;					\
+	swi	r23, r1, PTO+PT_R23;					\
+	swi	r24, r1, PTO+PT_R24;					\
+	swi	r25, r1, PTO+PT_R25;					\
+	swi	r26, r1, PTO+PT_R26;					\
+	swi	r27, r1, PTO+PT_R27;					\
+	swi	r28, r1, PTO+PT_R28;					\
+	swi	r29, r1, PTO+PT_R29;					\
+	swi	r30, r1, PTO+PT_R30;					\
+	swi	r31, r1, PTO+PT_R31;	/* Save current task reg */	\
+	mfs	r11, rmsr;		/* save MSR */			\
+	nop;								\
+	swi	r11, r1, PTO+PT_MSR;
+
+#define RESTORE_REGS \
+	lwi	r11, r1, PTO+PT_MSR;					\
+	mts	rmsr , r11;						\
+	nop;								\
+	lwi	r2, r1, PTO+PT_R2;	/* restore SDA */		\
+	lwi	r5, r1, PTO+PT_R5;					\
+	lwi	r6, r1, PTO+PT_R6;					\
+	lwi	r7, r1, PTO+PT_R7;					\
+	lwi	r8, r1, PTO+PT_R8;					\
+	lwi	r9, r1, PTO+PT_R9;					\
+	lwi	r10, r1, PTO+PT_R10;					\
+	lwi	r11, r1, PTO+PT_R11;	/* restore clobbered regs after rval */\
+	lwi	r12, r1, PTO+PT_R12;					\
+	lwi	r13, r1, PTO+PT_R13;	/* restore SDA2 */		\
+	lwi	r14, r1, PTO+PT_PC;	/* RESTORE_LINK PC, before IRQ/trap */\
+	lwi	r15, r1, PTO+PT_R15;	/* restore LP */		\
+	lwi	r18, r1, PTO+PT_R18;	/* restore asm scratch reg */	\
+	lwi	r19, r1, PTO+PT_R19;					\
+	lwi	r20, r1, PTO+PT_R20;					\
+	lwi	r21, r1, PTO+PT_R21;					\
+	lwi	r22, r1, PTO+PT_R22;					\
+	lwi	r23, r1, PTO+PT_R23;					\
+	lwi	r24, r1, PTO+PT_R24;					\
+	lwi	r25, r1, PTO+PT_R25;					\
+	lwi	r26, r1, PTO+PT_R26;					\
+	lwi	r27, r1, PTO+PT_R27;					\
+	lwi	r28, r1, PTO+PT_R28;					\
+	lwi	r29, r1, PTO+PT_R29;					\
+	lwi	r30, r1, PTO+PT_R30;					\
+	lwi	r31, r1, PTO+PT_R31;	/* Restore cur task reg */
+
+.text
+
+/*
+ * User trap.
+ *
+ * System calls are handled here.
+ *
+ * Syscall protocol:
+ * Syscall number in r12, args in r5-r10
+ * Return value in r3
+ *
+ * Trap entered via brki instruction, so BIP bit is set, and interrupts
+ * are masked. This is nice, means we don't have to CLI before state save
+ */
+C_ENTRY(_user_exception):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	addi	r14, r14, 4	/* return address is 4 byte after call */
+	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11);	/* Save r11 */
+
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
+	beqi	r11, 1f;		/* Jump ahead if coming from user */
+/* Kernel-mode state save. */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+	tophys(r1,r11);
+	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+	SAVE_REGS
+
+	addi	r11, r0, 1; 		/* Was in kernel-mode. */
+	swi	r11, r1, PTO+PT_MODE; /* pt_regs -> kernel mode */
+	brid	2f;
+	nop;				/* Fill delay slot */
+
+/* User-mode state save.  */
+1:
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11);	/* restore r11 */
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+	tophys(r1,r1);
+	lwi	r1, r1, TS_THREAD_INFO;	/* get stack from task_struct */
+/* calculate kernel stack pointer from task struct 8k */
+	addik	r1, r1, THREAD_SIZE;
+	tophys(r1,r1);
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	SAVE_REGS
+
+	swi	r0, r1, PTO+PT_MODE;			/* Was in user-mode. */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	swi	r11, r1, PTO+PT_R1;		/* Store user SP.  */
+	addi	r11, r0, 1;
+	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
+2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	/* get saved current */
+	/* Save away the syscall number.  */
+	swi	r12, r1, PTO+PT_R0;
+	tovirt(r1,r1)
+
+	la	r15, r0, ret_from_trap-8
+/* where the trap should return need -8 to adjust for rtsd r15, 8*/
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid. The LP
+ * register should point to the location where
+ * the called function should return.  [note that MAKE_SYS_CALL uses label 1] */
+	/* See if the system call number is valid.  */
+	addi	r11, r12, -__NR_syscalls;
+	bgei	r11,1f;
+	/* Figure out which function to use for this system call.  */
+	/* Note Microblaze barrel shift is optional, so don't rely on it */
+	add	r12, r12, r12;			/* convert num -> ptr */
+	add	r12, r12, r12;
+
+	/* Trac syscalls and stored them to r0_ram */
+	lwi	r3, r12, 0x400 + TOPHYS(r0_ram)
+	addi	r3, r3, 1
+	swi	r3, r12, 0x400 + TOPHYS(r0_ram)
+
+	lwi	r12, r12, TOPHYS(sys_call_table); /* Function ptr */
+	/* Make the system call.  to r12*/
+	set_vms;
+	rtid	r12, 0;
+	nop;
+	/* The syscall number is invalid, return an error.  */
+1:	VM_ON;	/* RETURN() expects virtual mode*/
+	addi	r3, r0, -ENOSYS;
+	rtsd	r15,8;		/* looks like a normal subroutine return */
+	or 	r0, r0, r0
+
+
+/* Entry point used to return from a syscall/trap.  */
+/* We re-enable BIP bit before state restore */
+C_ENTRY(ret_from_trap):
+	set_bip;			/*  Ints masked for state restore*/
+	lwi	r11, r1, PTO+PT_MODE;
+/* See if returning to kernel mode, if so, skip resched &c.  */
+	bnei	r11, 2f;
+
+	/* We're returning to user mode, so check for various conditions that
+	 * trigger rescheduling. */
+	/* Get current task ptr into r11 */
+	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f;
+
+	swi	r3, r1, PTO + PT_R3; /* store syscall result */
+	swi	r4, r1, PTO + PT_R4;
+	bralid	r15, schedule;	/* Call scheduler */
+	nop;				/* delay slot */
+	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
+	lwi	r4, r1, PTO + PT_R4;
+
+	/* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqi	r11, 1f;		/* Signals to handle, handle them */
+
+	swi	r3, r1, PTO + PT_R3; /* store syscall result */
+	swi	r4, r1, PTO + PT_R4;
+	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+	addi	r7, r0, 1;		/* Arg 3: int in_syscall */
+	bralid	r15, do_signal;	/* Handle any signals */
+	nop;
+	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
+	lwi	r4, r1, PTO + PT_R4;
+
+/* Finally, return to user state.  */
+1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
+	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	VM_OFF;
+	tophys(r1,r1);
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+	lwi	r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
+	bri	6f;
+
+/* Return to kernel state.  */
+2:	VM_OFF;
+	tophys(r1,r1);
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+	tovirt(r1,r1);
+6:
+TRAP_return:		/* Make global symbol for debugging */
+	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+	nop;
+
+
+/* These syscalls need access to the struct pt_regs on the stack, so we
+   implement them in assembly (they're basically all wrappers anyway).  */
+
+C_ENTRY(sys_fork_wrapper):
+	addi	r5, r0, SIGCHLD			/* Arg 0: flags */
+	lwi	r6, r1, PTO+PT_R1	/* Arg 1: child SP (use parent's) */
+	la	r7, r1, PTO			/* Arg 2: parent context */
+	add	r8. r0, r0			/* Arg 3: (unused) */
+	add	r9, r0, r0;			/* Arg 4: (unused) */
+	add	r10, r0, r0;			/* Arg 5: (unused) */
+	brid	do_fork		/* Do real work (tail-call) */
+	nop;
+
+/* This the initial entry point for a new child thread, with an appropriate
+   stack in place that makes it look the the child is in the middle of an
+   syscall.  This function is actually `returned to' from switch_thread
+   (copy_thread makes ret_from_fork the return address in each new thread's
+   saved context).  */
+C_ENTRY(ret_from_fork):
+	bralid	r15, schedule_tail; /* ...which is schedule_tail's arg */
+	add	r3, r5, r0;	/* switch_thread returns the prev task */
+				/* ( in the delay slot ) */
+	add	r3, r0, r0;	/* Child's fork call should return 0. */
+	brid	ret_from_trap;	/* Do normal trap return */
+	nop;
+
+C_ENTRY(sys_vfork_wrapper):
+	la	r5, r1, PTO
+	brid	sys_vfork	/* Do real work (tail-call) */
+	nop
+
+C_ENTRY(sys_clone_wrapper):
+	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
+	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
+1:	la	r7, r1, PTO;			/* Arg 2: parent context */
+	add	r8, r0, r0;			/* Arg 3: (unused) */
+	add	r9, r0, r0;			/* Arg 4: (unused) */
+	add	r10, r0, r0;			/* Arg 5: (unused) */
+	brid	do_fork		/* Do real work (tail-call) */
+	nop;
+
+C_ENTRY(sys_execve_wrapper):
+	la	r8, r1, PTO;		/* add user context as 4th arg */
+	brid	sys_execve;	/* Do real work (tail-call).*/
+	nop;
+
+C_ENTRY(sys_sigsuspend_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r6, r1, PTO;		/* add user context as 2nd arg */
+	bralid	r15, sys_sigsuspend; /* Do real work.*/
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+C_ENTRY(sys_rt_sigsuspend_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r7, r1, PTO;		/* add user context as 3rd arg */
+	brlid	r15, sys_rt_sigsuspend;	/* Do real work.*/
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+
+C_ENTRY(sys_sigreturn_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r5, r1, PTO;		/* add user context as 1st arg */
+	brlid	r15, sys_sigreturn;	/* Do real work.*/
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+C_ENTRY(sys_rt_sigreturn_wrapper):
+	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	swi	r4, r1, PTO+PT_R4;
+	la	r5, r1, PTO;		/* add user context as 1st arg */
+	brlid	r15, sys_rt_sigreturn	/* Do real work */
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	bri ret_from_trap /* fall through will not work here due to align */
+	nop;
+
+/*
+ * HW EXCEPTION rutine start
+ */
+
+#define SAVE_STATE	\
+	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */	\
+	set_bip;	/*equalize initial state for all possible entries*/\
+	clear_eip;							\
+	enable_irq;							\
+	set_ee;								\
+	/* See if already in kernel mode.*/				\
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));				\
+	beqi	r11, 1f;		/* Jump ahead if coming from user */\
+	/* Kernel-mode state save.  */					\
+	/* Reload kernel stack-ptr. */					\
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
+	tophys(r1,r11);							\
+	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */	\
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */\
+	/* store return registers separately because			\
+	 * this macros is use for others exceptions */			\
+	swi	r3, r1, PTO + PT_R3;					\
+	swi	r4, r1, PTO + PT_R4;					\
+	SAVE_REGS							\
+	/* PC, before IRQ/trap - this is one instruction above */	\
+	swi	r17, r1, PTO+PT_PC;					\
+									\
+	addi	r11, r0, 1; 		/* Was in kernel-mode.  */	\
+	swi	r11, r1, PTO+PT_MODE; 	 				\
+	brid	2f;							\
+	nop;				/* Fill delay slot */		\
+1:	/* User-mode state save.  */					\
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+	tophys(r1,r1);							\
+	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */	\
+	addik	r1, r1, THREAD_SIZE;	/* calculate kernel stack pointer */\
+	tophys(r1,r1);							\
+									\
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */\
+	/* store return registers separately because this macros	\
+	 * is use for others exceptions */				\
+	swi	r3, r1, PTO + PT_R3; 					\
+	swi	r4, r1, PTO + PT_R4;					\
+	SAVE_REGS							\
+	/* PC, before IRQ/trap - this is one instruction above FIXME*/	\
+	swi	r17, r1, PTO+PT_PC;					\
+									\
+	swi	r0, r1, PTO+PT_MODE; /* Was in user-mode.  */		\
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
+	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
+	addi	r11, r0, 1;						\
+	swi	r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
+2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+	/* Save away the syscall number.  */				\
+	swi	r0, r1, PTO+PT_R0;					\
+	tovirt(r1,r1)
+
+C_ENTRY(full_exception_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	/* adjust exception address for privileged instruction
+	 * for finding where is it */
+	addik	r17, r17, -4
+	SAVE_STATE /* Save registers */
+	/* FIXME this can be store directly in PT_ESR reg.
+	 * I tested it but there is a fault */
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc - 8
+	la	r5, r1, PTO		 /* parameter struct pt_regs * regs */
+	mfs	r6, resr
+	nop
+	mfs	r7, rfsr;		/* save FSR */
+	nop
+	la	r12, r0, full_exception
+	set_vms;
+	rtbd	r12, 0;
+	nop;
+
+/*
+ * Unaligned data trap.
+ *
+ * Unaligned data trap last on 4k page is handled here.
+ *
+ * Trap entered via exception, so EE bit is set, and interrupts
+ * are masked.  This is nice, means we don't have to CLI before state save
+ *
+ * The assembler routine is in "arch/microblaze/kernel/hw_exception_handler.S"
+ */
+C_ENTRY(unaligned_data_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	SAVE_STATE		/* Save registers.*/
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc-8
+	mfs	r3, resr		/* ESR */
+	nop
+	mfs	r4, rear		/* EAR */
+	nop
+	la	r7, r1, PTO		/* parameter struct pt_regs * regs */
+	la	r12, r0, _unaligned_data_exception
+	set_vms;
+	rtbd	r12, 0;	/* interrupts enabled */
+	nop;
+
+/*
+ * Page fault traps.
+ *
+ * If the real exception handler (from hw_exception_handler.S) didn't find
+ * the mapping for the process, then we're thrown here to handle such situation.
+ *
+ * Trap entered via exceptions, so EE bit is set, and interrupts
+ * are masked.  This is nice, means we don't have to CLI before state save
+ *
+ * Build a standard exception frame for TLB Access errors.  All TLB exceptions
+ * will bail out to this point if they can't resolve the lightweight TLB fault.
+ *
+ * The C function called is in "arch/microblaze/mm/fault.c", declared as:
+ * void do_page_fault(struct pt_regs *regs,
+ *				unsigned long address,
+ *				unsigned long error_code)
+ */
+/* data and intruction trap - which is choose is resolved int fault.c */
+C_ENTRY(page_fault_data_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	SAVE_STATE		/* Save registers.*/
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc-8
+	la	r5, r1, PTO		/* parameter struct pt_regs * regs */
+	mfs	r6, rear		/* parameter unsigned long address */
+	nop
+	mfs	r7, resr		/* parameter unsigned long error_code */
+	nop
+	la	r12, r0, do_page_fault
+	set_vms;
+	rtbd	r12, 0;	/* interrupts enabled */
+	nop;
+
+C_ENTRY(page_fault_instr_trap):
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	SAVE_STATE		/* Save registers.*/
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_exc-8
+	la	r5, r1, PTO		/* parameter struct pt_regs * regs */
+	mfs	r6, rear		/* parameter unsigned long address */
+	nop
+	ori	r7, r0, 0		/* parameter unsigned long error_code */
+	la	r12, r0, do_page_fault
+	set_vms;
+	rtbd	r12, 0;	/* interrupts enabled */
+	nop;
+
+/* Entry point used to return from an exception.  */
+C_ENTRY(ret_from_exc):
+	set_bip;			/*  Ints masked for state restore*/
+	lwi	r11, r1, PTO+PT_MODE;
+	bnei	r11, 2f;		/* See if returning to kernel mode, */
+					/* ... if so, skip resched &c.  */
+
+	/* We're returning to user mode, so check for various conditions that
+	   trigger rescheduling. */
+	/* Get current task ptr into r11 */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+	bralid	r15, schedule;	/* Call scheduler */
+	nop;				/* delay slot */
+
+	/* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqi	r11, 1f;		/* Signals to handle, handle them */
+
+	/*
+	 * Handle a signal return; Pending signals should be in r18.
+	 *
+	 * Not all registers are saved by the normal trap/interrupt entry
+	 * points (for instance, call-saved registers (because the normal
+	 * C-compiler calling sequence in the kernel makes sure they're
+	 * preserved), and call-clobbered registers in the case of
+	 * traps), but signal handlers may want to examine or change the
+	 * complete register state.  Here we save anything not saved by
+	 * the normal entry sequence, so that it may be safely restored
+	 * (in a possibly modified form) after do_signal returns.
+	 * store return registers separately because this macros is use
+	 * for others exceptions */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
+	bralid	r15, do_signal;	/* Handle any signals */
+	nop;
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+
+/* Finally, return to user state.  */
+1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	VM_OFF;
+	tophys(r1,r1);
+
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+	lwi	r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */
+	bri	6f;
+/* Return to kernel state.  */
+2:	VM_OFF;
+	tophys(r1,r1);
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS;
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+	tovirt(r1,r1);
+6:
+EXC_return:		/* Make global symbol for debugging */
+	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+	nop;
+
+/*
+ * HW EXCEPTION rutine end
+ */
+
+/*
+ * Hardware maskable interrupts.
+ *
+ * The stack-pointer (r1) should have already been saved to the memory
+ * location PER_CPU(ENTRY_SP).
+ */
+C_ENTRY(_interrupt):
+/* MS: we are in physical address */
+/* Save registers, switch to proper stack, convert SP to virtual.*/
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+	swi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+	/* MS: See if already in kernel mode. */
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));
+	beqi	r11, 1f; /* MS: Jump ahead if coming from user */
+
+/* Kernel-mode state save. */
+	or	r11, r1, r0
+	tophys(r1,r11); /* MS: I have in r1 physical address where stack is */
+/* MS: Save original SP - position PT_R1 to next stack frame 4 *1 - 152*/
+	swi	r11, r1, (PT_R1 - PT_SIZE);
+/* MS: restore r11 because of saving in SAVE_REGS */
+	lwi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+	/* save registers */
+/* MS: Make room on the stack -> activation record */
+	addik	r1, r1, -STATE_SAVE_SIZE;
+/* MS: store return registers separately because
+ * this macros is use for others exceptions */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	SAVE_REGS
+	/* MS: store mode */
+	addi	r11, r0, 1; /* MS: Was in kernel-mode. */
+	swi	r11, r1, PTO + PT_MODE; /* MS: and save it */
+	brid	2f;
+	nop; /* MS: Fill delay slot */
+
+1:
+/* User-mode state save. */
+/* MS: restore r11 -> FIXME move before SAVE_REG */
+	lwi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+ /* MS: get the saved current */
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	tophys(r1,r1);
+	lwi	r1, r1, TS_THREAD_INFO;
+	addik	r1, r1, THREAD_SIZE;
+	tophys(r1,r1);
+	/* save registers */
+	addik	r1, r1, -STATE_SAVE_SIZE;
+	swi	r3, r1, PTO+PT_R3;
+	swi	r4, r1, PTO+PT_R4;
+	SAVE_REGS
+	/* calculate mode */
+	swi	r0, r1, PTO + PT_MODE;
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	swi	r11, r1, PTO+PT_R1;
+	/* setup kernel mode to KM */
+	addi	r11, r0, 1;
+	swi	r11, r0, TOPHYS(PER_CPU(KM));
+
+2:
+	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	swi	r0, r1, PTO + PT_R0;
+	tovirt(r1,r1)
+	la	r5, r1, PTO;
+	set_vms;
+	la	r11, r0, do_IRQ;
+	la	r15, r0, irq_call;
+irq_call:rtbd	r11, 0;
+	nop;
+
+/* MS: we are in virtual mode */
+ret_from_irq:
+	lwi	r11, r1, PTO + PT_MODE;
+	bnei	r11, 2f;
+
+	add	r11, r0, CURRENT_TASK;
+	lwi	r11, r11, TS_THREAD_INFO;
+	lwi	r11, r11, TI_FLAGS; /* MS: get flags from thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f
+	bralid	r15, schedule;
+	nop; /* delay slot */
+
+    /* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK;
+	lwi	r11, r11, TS_THREAD_INFO; /* MS: get thread info */
+	lwi	r11, r11, TI_FLAGS; /* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqid	r11, no_intr_resched
+/* Handle a signal return; Pending signals should be in r18. */
+	addi	r7, r0, 0; /* Arg 3: int in_syscall */
+	la	r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+	bralid	r15, do_signal;	/* Handle any signals */
+	add	r6, r0, r0; /* Arg 2: sigset_t *oldset */
+
+/* Finally, return to user state. */
+no_intr_resched:
+    /* Disable interrupts, we are now committed to the state restore */
+	disable_irq
+	swi	r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
+	add	r11, r0, CURRENT_TASK;
+	swi	r11, r0, PER_CPU(CURRENT_SAVE);
+	VM_OFF;
+	tophys(r1,r1);
+	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
+	lwi	r4, r1, PTO + PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
+	lwi	r1, r1, PT_R1 - PT_SIZE;
+	bri	6f;
+/* MS: Return to kernel state. */
+2:	VM_OFF /* MS: turn off MMU */
+	tophys(r1,r1)
+	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
+	lwi	r4, r1, PTO + PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE	/* MS: Clean up stack space. */
+	tovirt(r1,r1);
+6:
+IRQ_return: /* MS: Make global symbol for debugging */
+	rtid	r14, 0
+	nop
+
+/*
+ * `Debug' trap
+ *  We enter dbtrap in "BIP" (breakpoint) mode.
+ *  So we exit the breakpoint mode with an 'rtbd' and proceed with the
+ *  original dbtrap.
+ *  however, wait to save state first
+ */
+C_ENTRY(_debug_exception):
+	/* BIP bit is set on entry, no interrupts can occur */
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+
+	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */
+	set_bip;	/*equalize initial state for all possible entries*/
+	clear_eip;
+	enable_irq;
+	lwi	r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
+	beqi	r11, 1f;		/* Jump ahead if coming from user */
+	/* Kernel-mode state save.  */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+	tophys(r1,r11);
+	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	SAVE_REGS;
+
+	addi	r11, r0, 1; 		/* Was in kernel-mode.  */
+	swi	r11, r1, PTO + PT_MODE;
+	brid	2f;
+	nop;				/* Fill delay slot */
+1:      /* User-mode state save.  */
+	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+	tophys(r1,r1);
+	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */
+	addik	r1, r1, THREAD_SIZE;	/* calculate kernel stack pointer */
+	tophys(r1,r1);
+
+	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	swi	r3, r1, PTO + PT_R3;
+	swi	r4, r1, PTO + PT_R4;
+	SAVE_REGS;
+
+	swi	r0, r1, PTO+PT_MODE; /* Was in user-mode.  */
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */
+	addi	r11, r0, 1;
+	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
+2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+	/* Save away the syscall number.  */
+	swi	r0, r1, PTO+PT_R0;
+	tovirt(r1,r1)
+
+	addi	r5, r0, SIGTRAP		     /* send the trap signal */
+	add	r6, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	addk	r7, r0, r0		     /* 3rd param zero */
+
+	set_vms;
+	la	r11, r0, send_sig;
+	la	r15, r0, dbtrap_call;
+dbtrap_call:	rtbd	r11, 0;
+	nop;
+
+	set_bip;			/*  Ints masked for state restore*/
+	lwi	r11, r1, PTO+PT_MODE;
+	bnei	r11, 2f;
+
+	/* Get current task ptr into r11 */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_NEED_RESCHED;
+	beqi	r11, 5f;
+
+/* Call the scheduler before returning from a syscall/trap. */
+
+	bralid	r15, schedule;	/* Call scheduler */
+	nop;				/* delay slot */
+	/* XXX Is PT_DTRACE handling needed here? */
+	/* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here.  */
+
+	/* Maybe handle a signal */
+5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
+	andi	r11, r11, _TIF_SIGPENDING;
+	beqi	r11, 1f;		/* Signals to handle, handle them */
+
+/* Handle a signal return; Pending signals should be in r18.  */
+	/* Not all registers are saved by the normal trap/interrupt entry
+	   points (for instance, call-saved registers (because the normal
+	   C-compiler calling sequence in the kernel makes sure they're
+	   preserved), and call-clobbered registers in the case of
+	   traps), but signal handlers may want to examine or change the
+	   complete register state.  Here we save anything not saved by
+	   the normal entry sequence, so that it may be safely restored
+	   (in a possibly modified form) after do_signal returns.  */
+
+	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+	addi  r7, r0, 0;	/* Arg 3: int in_syscall */
+	bralid	r15, do_signal;	/* Handle any signals */
+	nop;
+
+
+/* Finally, return to user state.  */
+1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	VM_OFF;
+	tophys(r1,r1);
+
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+
+	lwi	r1, r1, PT_R1 - PT_SIZE;
+					/* Restore user stack pointer. */
+	bri	6f;
+
+/* Return to kernel state.  */
+2:	VM_OFF;
+	tophys(r1,r1);
+	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
+	lwi	r4, r1, PTO+PT_R4;
+	RESTORE_REGS
+	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
+
+	tovirt(r1,r1);
+6:
+DBTRAP_return:		/* Make global symbol for debugging */
+	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+	nop;
+
+
+
+ENTRY(_switch_to)
+	/* prepare return value */
+	addk	r3, r0, r31
+
+	/* save registers in cpu_context */
+	/* use r11 and r12, volatile registers, as temp register */
+	/* give start of cpu_context for previous process */
+	addik	r11, r5, TI_CPU_CONTEXT
+	swi	r1, r11, CC_R1
+	swi	r2, r11, CC_R2
+	/* skip volatile registers.
+	 * they are saved on stack when we jumped to _switch_to() */
+	/* dedicated registers */
+	swi	r13, r11, CC_R13
+	swi	r14, r11, CC_R14
+	swi	r15, r11, CC_R15
+	swi	r16, r11, CC_R16
+	swi	r17, r11, CC_R17
+	swi	r18, r11, CC_R18
+	/* save non-volatile registers */
+	swi	r19, r11, CC_R19
+	swi	r20, r11, CC_R20
+	swi	r21, r11, CC_R21
+	swi	r22, r11, CC_R22
+	swi	r23, r11, CC_R23
+	swi	r24, r11, CC_R24
+	swi	r25, r11, CC_R25
+	swi	r26, r11, CC_R26
+	swi	r27, r11, CC_R27
+	swi	r28, r11, CC_R28
+	swi	r29, r11, CC_R29
+	swi	r30, r11, CC_R30
+	/* special purpose registers */
+	mfs	r12, rmsr
+	nop
+	swi	r12, r11, CC_MSR
+	mfs	r12, rear
+	nop
+	swi	r12, r11, CC_EAR
+	mfs	r12, resr
+	nop
+	swi	r12, r11, CC_ESR
+	mfs	r12, rfsr
+	nop
+	swi	r12, r11, CC_FSR
+
+	/* update r31, the current */
+	lwi	r31, r6, TI_TASK/* give me pointer to task which will be next */
+	/* stored it to current_save too */
+	swi	r31, r0, PER_CPU(CURRENT_SAVE)
+
+	/* get new process' cpu context and restore */
+	/* give me start where start context of next task */
+	addik	r11, r6, TI_CPU_CONTEXT
+
+	/* non-volatile registers */
+	lwi	r30, r11, CC_R30
+	lwi	r29, r11, CC_R29
+	lwi	r28, r11, CC_R28
+	lwi	r27, r11, CC_R27
+	lwi	r26, r11, CC_R26
+	lwi	r25, r11, CC_R25
+	lwi	r24, r11, CC_R24
+	lwi	r23, r11, CC_R23
+	lwi	r22, r11, CC_R22
+	lwi	r21, r11, CC_R21
+	lwi	r20, r11, CC_R20
+	lwi	r19, r11, CC_R19
+	/* dedicated registers */
+	lwi	r18, r11, CC_R18
+	lwi	r17, r11, CC_R17
+	lwi	r16, r11, CC_R16
+	lwi	r15, r11, CC_R15
+	lwi	r14, r11, CC_R14
+	lwi	r13, r11, CC_R13
+	/* skip volatile registers */
+	lwi	r2, r11, CC_R2
+	lwi	r1, r11, CC_R1
+
+	/* special purpose registers */
+	lwi	r12, r11, CC_FSR
+	mts	rfsr, r12
+	nop
+	lwi	r12, r11, CC_MSR
+	mts	rmsr, r12
+	nop
+
+	rtsd	r15, 8
+	nop
+
+ENTRY(_reset)
+	brai	0x70; /* Jump back to FS-boot */
+
+ENTRY(_break)
+	mfs	r5, rmsr
+	nop
+	swi	r5, r0, 0x250 + TOPHYS(r0_ram)
+	mfs	r5, resr
+	nop
+	swi	r5, r0, 0x254 + TOPHYS(r0_ram)
+	bri	0
+
+	/* These are compiled and loaded into high memory, then
+	 * copied into place in mach_early_setup */
+	.section	.init.ivt, "ax"
+	.org	0x0
+	/* this is very important - here is the reset vector */
+	/* in current MMU branch you don't care what is here - it is
+	 * used from bootloader site - but this is correct for FS-BOOT */
+	brai	0x70
+	nop
+	brai	TOPHYS(_user_exception); /* syscall handler */
+	brai	TOPHYS(_interrupt);	/* Interrupt handler */
+	brai	TOPHYS(_break);		/* nmi trap handler */
+	brai	TOPHYS(_hw_exception_handler);	/* HW exception handler */
+
+	.org	0x60
+	brai	TOPHYS(_debug_exception);	/* debug trap handler*/
+
+.section .rodata,"a"
+#include "syscall_table.S"
+
+syscall_table_size=(.-sys_call_table)
+
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 4a8a4064c7e..0cb64a31e89 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -21,9 +21,9 @@
 
 #include <asm/exceptions.h>
 #include <asm/entry.h>		/* For KM CPU var */
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
 #include <asm/current.h>
 
 #define MICROBLAZE_ILL_OPCODE_EXCEPTION	0x02
@@ -31,7 +31,7 @@
 #define MICROBLAZE_DBUS_EXCEPTION	0x04
 #define MICROBLAZE_DIV_ZERO_EXCEPTION	0x05
 #define MICROBLAZE_FPU_EXCEPTION	0x06
-#define MICROBLAZE_PRIVILEG_EXCEPTION	0x07
+#define MICROBLAZE_PRIVILEGED_EXCEPTION	0x07
 
 static DEFINE_SPINLOCK(die_lock);
 
@@ -66,6 +66,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 							int fsr, int addr)
 {
+#ifdef CONFIG_MMU
+	int code;
+	addr = regs->pc;
+#endif
+
 #if 0
 	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
 			type, user_mode(regs) ? "user" : "kernel", fsr,
@@ -74,7 +79,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 
 	switch (type & 0x1F) {
 	case MICROBLAZE_ILL_OPCODE_EXCEPTION:
-		_exception(SIGILL, regs, ILL_ILLOPC, addr);
+		if (user_mode(regs)) {
+			printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+		die("opcode exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_IBUS_EXCEPTION:
 		if (user_mode(regs)) {
@@ -95,11 +106,16 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DIV_ZERO_EXCEPTION:
-		printk(KERN_WARNING "Divide by zero exception\n");
-		_exception(SIGILL, regs, ILL_ILLOPC, addr);
+		if (user_mode(regs)) {
+			printk(KERN_WARNING "Divide by zero exception in user mode\n");
+			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+		die("Divide by exception", regs, SIGBUS);
 		break;
-
 	case MICROBLAZE_FPU_EXCEPTION:
+		printk(KERN_WARNING "FPU exception\n");
 		/* IEEE FP exception */
 		/* I removed fsr variable and use code var for storing fsr */
 		if (fsr & FSR_IO)
@@ -115,7 +131,20 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		_exception(SIGFPE, regs, fsr, addr);
 		break;
 
+#ifdef CONFIG_MMU
+	case MICROBLAZE_PRIVILEGED_EXCEPTION:
+		printk(KERN_WARNING "Privileged exception\n");
+		/* "brk r0,r0" - used as debug breakpoint */
+		if (get_user(code, (unsigned long *)regs->pc) == 0
+			&& code == 0x980c0000) {
+			_exception(SIGTRAP, regs, TRAP_BRKPT, addr);
+		} else {
+			_exception(SIGILL, regs, ILL_PRVOPC, addr);
+		}
+		break;
+#endif
 	default:
+	/* FIXME what to do in unexpected exception */
 		printk(KERN_WARNING "Unexpected exception %02x "
 			"PC=%08x in %s mode\n", type, (unsigned int) addr,
 			kernel_mode(regs) ? "kernel" : "user");
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 319dc35fc92..e568d6ec621 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -3,6 +3,26 @@
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -12,6 +32,22 @@
 #include <asm/thread_info.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_MMU
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+	.space	4096
+.global swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+#endif /* CONFIG_MMU */
+
 	.text
 ENTRY(_start)
 	mfs	r1, rmsr
@@ -32,6 +68,123 @@ _copy_fdt:
 	addik	r3, r3, -4 /* descrement loop */
 no_fdt_arg:
 
+#ifdef CONFIG_MMU
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line to __init_end. There is space for storing command line.
+ */
+	or	r6, r0, r0		/* incremment */
+	ori	r4, r0, __init_end	/* load address of command line */
+	tophys(r4,r4)			/* convert to phys address */
+	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+	lbu	r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+	sb	r7, r4, r6		/* addr[r4+r6]= r7*/
+	addik	r6, r6, 1		/* increment counting */
+	bgtid	r3, _copy_command_line	/* loop for all entries       */
+	addik	r3, r3, -1		/* descrement loop */
+	addik	r5, r4, 0		/* add new space for command line */
+	tovirt(r5,r5)
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+	or	r6, r0, r0				/* incremment */
+	ori	r4, r0, TOPHYS(_bram_load_start)	/* save bram context */
+	ori	r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+	lw	r7, r0, r6		/* r7 = r0 + r6 */
+	sw	r7, r4, r6		/* addr[r4 + r6] = r7*/
+	addik	r6, r6, 4		/* increment counting */
+	bgtid	r3, _copy_bram		/* loop for all entries */
+	addik	r3, r3, -4		/* descrement loop */
+#endif
+	/* We have to turn on the MMU right away. */
+
+	/*
+	 * Set up the initial MMU state so we can do the first level of
+	 * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+	 * virtual to physical.
+	 */
+	nop
+	addik	r3, r0, 63		/* Invalidate all TLB entries */
+_invalidate:
+	mts	rtlbx, r3
+	mts	rtlbhi, r0			/* flush: ensure V is clear   */
+	bgtid	r3, _invalidate		/* loop for all entries       */
+	addik	r3, r3, -1
+	/* sync */
+
+	/*
+	 * We should still be executing code at physical address area
+	 * RAM_BASEADDR at this point. However, kernel code is at
+	 * a virtual address. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
+	/*
+	 * Configure and load two entries into TLB slots 0 and 1.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	andi	r4,r4,0xfffffc00	/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	andi	r3,r3,0xfffffc00	/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+	mts     rtlbx,r0		/* TLB slow 0 */
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	addik	r4, r4, 0x01000000	/* Map next 16 M entries */
+	addik	r3, r3, 0x01000000
+
+	ori	r6,r0,1			/* TLB slot 1 */
+	mts     rtlbx,r6
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * Load a TLB entry for LMB, since we need access to
+	 * the exception vectors, using a 4k real==virtual mapping.
+	 */
+	ori	r6,r0,3			/* TLB slot 3 */
+	mts     rtlbx,r6
+
+	ori	r4,r0,(TLB_WR | TLB_EX)
+	ori	r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+	 * caches ready to work.
+	 */
+turn_on_mmu:
+	ori	r15,r0,start_here
+	ori	r4,r0,MSR_KERNEL_VMS
+	mts	rmsr,r4
+	nop
+	rted	r15,0			/* enables MMU */
+	nop
+
+start_here:
+#endif /* CONFIG_MMU */
+
 	/* Initialize small data anchors */
 	la	r13, r0, _KERNEL_SDA_BASE_
 	la	r2, r0, _KERNEL_SDA2_BASE_
@@ -51,6 +204,43 @@ no_fdt_arg:
 	brald	r15, r8
 	nop
 
+#ifndef CONFIG_MMU
 	la	r15, r0, machine_halt
 	braid	start_kernel
 	nop
+#else
+	/*
+	 * Initialize the MMU.
+	 */
+	bralid	r15, mmu_init
+	nop
+
+	/* Go back to running unmapped so we can load up new values
+	 * and change to using our exception vectors.
+	 * On the MicroBlaze, all we invalidate the used TLB entries to clear
+	 * the old 16M byte TLB mappings.
+	 */
+	ori	r15,r0,TOPHYS(kernel_load_context)
+	ori	r4,r0,MSR_KERNEL
+	mts	rmsr,r4
+	nop
+	bri	4
+	rted	r15,0
+	nop
+
+	/* Load up the kernel context */
+kernel_load_context:
+	# Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away.
+	ori	r5,r0,3
+	mts     rtlbx,r5
+	nop
+	mts	rtlbhi,r0
+	nop
+	addi	r15, r0, machine_halt
+	ori	r17, r0, start_kernel
+	ori	r4, r0, MSR_KERNEL_VMS
+	mts	rmsr, r4
+	nop
+	rted	r17, 0		/* enable MMU and jump to start_kernel */
+	nop
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index cf9486d9983..9d591cd74fc 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -53,6 +53,12 @@
  *   - Illegal instruction opcode
  *   - Divide-by-zero
  *
+ *   - Privileged instruction exception (MMU)
+ *   - Data storage exception (MMU)
+ *   - Instruction storage exception (MMU)
+ *   - Data TLB miss exception (MMU)
+ *   - Instruction TLB miss exception (MMU)
+ *
  * Note we disable interrupts during exception handling, otherwise we will
  * possibly get multiple re-entrancy if interrupt handles themselves cause
  * exceptions. JW
@@ -71,9 +77,24 @@
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
+#ifndef CONFIG_MMU
 #define EX_HANDLER_STACK_SIZ	(4*19)
+#endif
 #define NUM_TO_REG(num)		r ## num
 
+#ifdef CONFIG_MMU
+/* FIXME you can't change first load of MSR because there is
+ * hardcoded jump bri 4 */
+	#define RESTORE_STATE			\
+		lwi	r3, r1, PT_R3;		\
+		lwi	r4, r1, PT_R4;		\
+		lwi	r5, r1, PT_R5;		\
+		lwi	r6, r1, PT_R6;		\
+		lwi	r11, r1, PT_R11;	\
+		lwi	r31, r1, PT_R31;	\
+		lwi	r1, r0, TOPHYS(r0_ram + 0);
+#endif /* CONFIG_MMU */
+
 #define LWREG_NOP			\
 	bri	ex_handler_unhandled;	\
 	nop;
@@ -106,6 +127,54 @@
 	or	r3, r0, NUM_TO_REG (regnum);		\
 	bri	ex_sw_tail;
 
+#ifdef CONFIG_MMU
+	#define R3_TO_LWREG_VM_V(regnum)		\
+		brid	ex_lw_end_vm;			\
+		swi	r3, r7, 4 * regnum;
+
+	#define R3_TO_LWREG_VM(regnum)			\
+		brid	ex_lw_end_vm;			\
+		or	NUM_TO_REG (regnum), r0, r3;
+
+	#define SWREG_TO_R3_VM_V(regnum)		\
+		brid	ex_sw_tail_vm;			\
+		lwi	r3, r7, 4 * regnum;
+
+	#define SWREG_TO_R3_VM(regnum)			\
+		brid	ex_sw_tail_vm;			\
+		or	r3, r0, NUM_TO_REG (regnum);
+
+	/* Shift right instruction depending on available configuration */
+	#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
+	#define BSRLI(rD, rA, imm)	\
+		bsrli rD, rA, imm
+	#elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
+	#define BSRLI(rD, rA, imm)	\
+		ori rD, r0, (1 << imm);	\
+		idivu rD, rD, rA
+	#else
+	#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
+	/* Only the used shift constants defined here - add more if needed */
+	#define BSRLI2(rD, rA)				\
+		srl rD, rA;		/* << 1 */	\
+		srl rD, rD;		/* << 2 */
+	#define BSRLI10(rD, rA)				\
+		srl rD, rA;		/* << 1 */	\
+		srl rD, rD;		/* << 2 */	\
+		srl rD, rD;		/* << 3 */	\
+		srl rD, rD;		/* << 4 */	\
+		srl rD, rD;		/* << 5 */	\
+		srl rD, rD;		/* << 6 */	\
+		srl rD, rD;		/* << 7 */	\
+		srl rD, rD;		/* << 8 */	\
+		srl rD, rD;		/* << 9 */	\
+		srl rD, rD		/* << 10 */
+	#define BSRLI20(rD, rA)		\
+		BSRLI10(rD, rA);	\
+		BSRLI10(rD, rD)
+	#endif
+#endif /* CONFIG_MMU */
+
 .extern other_exception_handler /* Defined in exception.c */
 
 /*
@@ -163,34 +232,119 @@
 
 /* wrappers to restore state before coming to entry.S */
 
+#ifdef CONFIG_MMU
+.section .rodata
+.align 4
+_MB_HW_ExceptionVectorTable:
+/*  0 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+/*  1 - Unaligned data access exception */
+	.long	TOPHYS(handle_unaligned_ex)
+/*  2 - Illegal op-code exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  3 - Instruction bus error exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  4 - Data bus error exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  5 - Divide by zero exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  6 - Floating point unit exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  7 - Privileged instruction exception */
+	.long	TOPHYS(full_exception_trapw)
+/*  8 - 15 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+/* 16 - Data storage exception */
+	.long	TOPHYS(handle_data_storage_exception)
+/* 17 - Instruction storage exception */
+	.long	TOPHYS(handle_instruction_storage_exception)
+/* 18 - Data TLB miss exception */
+	.long	TOPHYS(handle_data_tlb_miss_exception)
+/* 19 - Instruction TLB miss exception */
+	.long	TOPHYS(handle_instruction_tlb_miss_exception)
+/* 20 - 31 - Undefined */
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+	.long	TOPHYS(ex_handler_unhandled)
+#endif
+
 .global _hw_exception_handler
 .section .text
 .align 4
 .ent _hw_exception_handler
 _hw_exception_handler:
+#ifndef CONFIG_MMU
 	addik	r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
+#else
+	swi	r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
+	/* Save date to kernel memory. Here is the problem
+	 * when you came from user space */
+	ori	r1, r0, TOPHYS(r0_ram + 28);
+#endif
 	swi	r3, r1, PT_R3
 	swi	r4, r1, PT_R4
 	swi	r5, r1, PT_R5
 	swi	r6, r1, PT_R6
 
-	mfs	r5, rmsr;
-	nop
-	swi	r5, r1, 0;
-	mfs	r4, rbtr	/* Save BTR before jumping to handler */
-	nop
+#ifdef CONFIG_MMU
+	swi	r11, r1, PT_R11
+	swi	r31, r1, PT_R31
+	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
+#endif
+
 	mfs	r3, resr
 	nop
+	mfs	r4, rear;
+	nop
 
+#ifndef CONFIG_MMU
 	andi	r5, r3, 0x1000;		/* Check ESR[DS] */
 	beqi	r5, not_in_delay_slot;	/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
 not_in_delay_slot:
 	swi	r17, r1, PT_R17
+#endif
 
 	andi	r5, r3, 0x1F;		/* Extract ESR[EXC] */
 
+#ifdef CONFIG_MMU
+	/* Calculate exception vector offset = r5 << 2 */
+	addk	r6, r5, r5; /* << 1 */
+	addk	r6, r6, r6; /* << 2 */
+
+/* counting which exception happen */
+	lwi	r5, r0, 0x200 + TOPHYS(r0_ram)
+	addi	r5, r5, 1
+	swi	r5, r0, 0x200 + TOPHYS(r0_ram)
+	lwi	r5, r6, 0x200 + TOPHYS(r0_ram)
+	addi	r5, r5, 1
+	swi	r5, r6, 0x200 + TOPHYS(r0_ram)
+/* end */
+	/* Load the HW Exception vector */
+	lwi	r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
+	bra	r6
+
+full_exception_trapw:
+	RESTORE_STATE
+	bri	full_exception_trap
+#else
 	/* Exceptions enabled here. This will allow nested exceptions */
 	mfs	r6, rmsr;
 	nop
@@ -254,6 +408,7 @@ handle_other_ex: /* Handle Other exceptions here */
 	lwi	r18, r1, PT_R18
 
 	bri	ex_handler_done; /* Complete exception handling */
+#endif
 
 /* 0x01 - Unaligned data access exception
  * This occurs when a word access is not aligned on a word boundary,
@@ -265,11 +420,28 @@ handle_other_ex: /* Handle Other exceptions here */
 handle_unaligned_ex:
 	/* Working registers already saved: R3, R4, R5, R6
 	 *  R3 = ESR
-	 *  R4 = BTR
+	 *  R4 = EAR
 	 */
-	mfs	r4, rear;
+#ifdef CONFIG_MMU
+	andi	r6, r3, 0x1000			/* Check ESR[DS] */
+	beqi	r6, _no_delayslot		/* Branch if ESR[DS] not set */
+	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
+_no_delayslot:
+#endif
+
+#ifdef CONFIG_MMU
+	/* Check if unaligned address is last on a 4k page */
+		andi	r5, r4, 0xffc
+		xori	r5, r5, 0xffc
+		bnei	r5, _unaligned_ex2
+	_unaligned_ex1:
+		RESTORE_STATE;
+/* Another page must be accessed or physical address not in page table */
+		bri	unaligned_data_trap
 
+	_unaligned_ex2:
+#endif
 	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
 	srl	r6, r6;
@@ -278,6 +450,45 @@ handle_unaligned_ex:
 	srl	r6, r6;
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
+#ifdef CONFIG_MMU
+	/* Get physical address */
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	ori	r5, r0, CONFIG_KERNEL_START
+	cmpu	r5, r4, r5
+	bgti	r5, _unaligned_ex3
+	ori	r5, r0, swapper_pg_dir
+	bri	_unaligned_ex4
+
+	/* Get the PGD for the current thread. */
+_unaligned_ex3: /* user thread */
+	addi	r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
+	lwi	r5, r5, TASK_THREAD + PGDIR
+_unaligned_ex4:
+	tophys(r5,r5)
+	BSRLI(r6,r4,20)			/* Create L1 (pgdir/pmd) address */
+	andi	r6, r6, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
+	or	r5, r5, r6
+	lwi	r6, r5, 0		/* Get L1 entry */
+	andi	r5, r6, 0xfffff000	/* Extract L2 (pte) base address. */
+	beqi	r5, _unaligned_ex1	/* Bail if no table */
+
+	tophys(r5,r5)
+	BSRLI(r6,r4,10)			/* Compute PTE address */
+	andi	r6, r6, 0xffc
+	andi	r5, r5, 0xfffff003
+	or	r5, r5, r6
+	lwi	r5, r5, 0		/* Get Linux PTE */
+
+	andi	r6, r5, _PAGE_PRESENT
+	beqi	r6, _unaligned_ex1	/* Bail if no page */
+
+	andi	r5, r5, 0xfffff000	/* Extract RPN */
+	andi	r4, r4, 0x00000fff	/* Extract offset */
+	or	r4, r4, r5		/* Create physical address */
+#endif /* CONFIG_MMU */
 
 	andi	r6, r3, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
@@ -355,6 +566,7 @@ ex_shw:
 ex_sw_end: /* Exception handling of store word, ends. */
 
 ex_handler_done:
+#ifndef CONFIG_MMU
 	lwi	r5, r1, 0 /* RMSR */
 	mts	rmsr, r5
 	nop
@@ -366,13 +578,455 @@ ex_handler_done:
 
 	rted	r17, 0
 	addik	r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
+#else
+	RESTORE_STATE;
+	rted	r17, 0
+	nop
+#endif
+
+#ifdef CONFIG_MMU
+	/* Exception vector entry code. This code runs with address translation
+	 * turned off (i.e. using physical addresses). */
+
+	/* Exception vectors. */
+
+	/* 0x10 - Data Storage Exception
+	 * This happens for just a few reasons. U0 set (but we don't do that),
+	 * or zone protection fault (user violation, write to protected page).
+	 * If this is just an update of modified status, we do that quickly
+	 * and exit. Otherwise, we call heavyweight functions to do the work.
+	 */
+	handle_data_storage_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables.
+		 */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex3
+		/* First, check if it was a zone fault (which means a user
+		 * tried to access a kernel or read-protected page - always
+		 * a SEGV). All other faults here must be stores, so no
+		 * need to check ESR_S as well. */
+		mfs	r4, resr
+		nop
+		andi	r4, r4, 0x800		/* ESR_Z - zone protection */
+		bnei	r4, ex2
+
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex4
+
+		/* Get the PGD for the current thread. */
+	ex3:
+		/* First, check if it was a zone fault (which means a user
+		 * tried to access a kernel or read-protected page - always
+		 * a SEGV). All other faults here must be stores, so no
+		 * need to check ESR_S as well. */
+		mfs	r4, resr
+		nop
+		andi	r4, r4, 0x800		/* ESR_Z */
+		bnei	r4, ex2
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex4:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex2			/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_RW	/* Is it writeable? */
+		beqi	r6, ex2			/* Bail if not */
+
+		/* Update 'changed' */
+		ori	r4, r4, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+		swi	r4, r5, 0		/* Update Linux page table */
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
+
+		/* find the TLB index that caused the fault. It has to be here*/
+		mts	rtlbsx, r3
+		nop
+		mfs	r5, rtlbx		/* DEBUG: TBD */
+		nop
+		mts	rtlblo, r4		/* Load TLB LO */
+		nop
+						/* Will sync shadow TLBs */
+
+		/* Done...restore registers and get out of here. */
+		mts	rpid, r11
+		nop
+		bri 4
+
+		RESTORE_STATE;
+		rted	r17, 0
+		nop
+	ex2:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out. */
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		bri	page_fault_data_trap
+
+
+	/* 0x11 - Instruction Storage Exception
+	 * This is caused by a fetch from non-execute or guarded pages. */
+	handle_instruction_storage_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+
+		mfs	r3, rear		/* Get faulting address */
+		nop
+		RESTORE_STATE;
+		bri	page_fault_instr_trap
+
+	/* 0x12 - Data TLB Miss Exception
+	 * As the name implies, translation is not in the MMU, so search the
+	 * page tables and fix it. The only purpose of this function is to
+	 * load TLB entries from the page table if they exist.
+	 */
+	handle_data_tlb_miss_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 * R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables. */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex5
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex6
 
+		/* Get the PGD for the current thread. */
+	ex5:
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex6:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex7			/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_PRESENT
+		beqi	r6, ex7
+
+		ori	r4, r4, _PAGE_ACCESSED
+		swi	r4, r5, 0
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+
+		bri	finish_tlb_load
+	ex7:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out.
+		 */
+		mts	rpid, r11
+		nop
+		bri	4
+		RESTORE_STATE;
+		bri	page_fault_data_trap
+
+	/* 0x13 - Instruction TLB Miss Exception
+	 * Nearly the same as above, except we get our information from
+	 * different registers and bailout to a different point.
+	 */
+	handle_instruction_tlb_miss_exception:
+		/* Working registers already saved: R3, R4, R5, R6
+		 *  R3 = ESR
+		 */
+		mfs	r11, rpid
+		nop
+		bri	4
+		mfs	r3, rear		/* Get faulting address */
+		nop
+
+		/* If we are faulting a kernel address, we have to use the
+		 * kernel page tables.
+		 */
+		ori	r4, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r4
+		bgti	r4, ex8
+		ori	r4, r0, swapper_pg_dir
+		mts	rpid, r0		/* TLB will have 0 TID */
+		nop
+		bri	ex9
+
+		/* Get the PGD for the current thread. */
+	ex8:
+		/* get current task address */
+		addi	r4 ,CURRENT_TASK, TOPHYS(0);
+		lwi	r4, r4, TASK_THREAD+PGDIR
+	ex9:
+		tophys(r4,r4)
+		BSRLI(r5,r3,20)		/* Create L1 (pgdir/pmd) address */
+		andi	r5, r5, 0xffc
+/* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */
+		or	r4, r4, r5
+		lwi	r4, r4, 0		/* Get L1 entry */
+		andi	r5, r4, 0xfffff000 /* Extract L2 (pte) base address */
+		beqi	r5, ex10		/* Bail if no table */
+
+		tophys(r5,r5)
+		BSRLI(r6,r3,10)			/* Compute PTE address */
+		andi	r6, r6, 0xffc
+		andi	r5, r5, 0xfffff003
+		or	r5, r5, r6
+		lwi	r4, r5, 0		/* Get Linux PTE */
+
+		andi	r6, r4, _PAGE_PRESENT
+		beqi	r6, ex7
+
+		ori	r4, r4, _PAGE_ACCESSED
+		swi	r4, r5, 0
+
+		/* Most of the Linux PTE is ready to load into the TLB LO.
+		 * We set ZSEL, where only the LS-bit determines user access.
+		 * We set execute, because we don't have the granularity to
+		 * properly set this at the page level (Linux problem).
+		 * If shared is set, we cause a zero PID->TID load.
+		 * Many of these bits are software only. Bits we don't set
+		 * here we (properly should) assume have the appropriate value.
+		 */
+		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
+
+		bri	finish_tlb_load
+	ex10:
+		/* The bailout. Restore registers to pre-exception conditions
+		 * and call the heavyweights to help us out.
+		 */
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		bri	page_fault_instr_trap
+
+/* Both the instruction and data TLB miss get to this point to load the TLB.
+ *	r3 - EA of fault
+ *	r4 - TLB LO (info from Linux PTE)
+ *	r5, r6 - available to use
+ *	PID - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ * A common place to load the TLB.
+ */
+	tlb_index:
+		.long	1 /* MS: storing last used tlb index */
+	finish_tlb_load:
+		/* MS: load the last used TLB index. */
+		lwi	r5, r0, TOPHYS(tlb_index)
+		addik	r5, r5, 1 /* MS: inc tlb_index -> use next one */
+
+/* MS: FIXME this is potential fault, because this is mask not count */
+		andi	r5, r5, (MICROBLAZE_TLB_SIZE-1)
+		ori	r6, r0, 1
+		cmp	r31, r5, r6
+		blti	r31, sem
+		addik	r5, r6, 1
+	sem:
+		/* MS: save back current TLB index */
+		swi	r5, r0, TOPHYS(tlb_index)
+
+		ori	r4, r4, _PAGE_HWEXEC	/* make it executable */
+		mts	rtlbx, r5		/* MS: save current TLB */
+		nop
+		mts	rtlblo,	r4		/* MS: save to TLB LO */
+		nop
+
+		/* Create EPN. This is the faulting address plus a static
+		 * set of bits. These are size, valid, E, U0, and ensure
+		 * bits 20 and 21 are zero.
+		 */
+		andi	r3, r3, 0xfffff000
+		ori	r3, r3, 0x0c0
+		mts	rtlbhi,	r3		/* Load TLB HI */
+		nop
+
+		/* Done...restore registers and get out of here. */
+	ex12:
+		mts	rpid, r11
+		nop
+		bri 4
+		RESTORE_STATE;
+		rted	r17, 0
+		nop
+
+	/* extern void giveup_fpu(struct task_struct *prev)
+	 *
+	 * The MicroBlaze processor may have an FPU, so this should not just
+	 * return: TBD.
+	 */
+	.globl giveup_fpu;
+	.align 4;
+	giveup_fpu:
+		bralid	r15,0			/* TBD */
+		nop
+
+	/* At present, this routine just hangs. - extern void abort(void) */
+	.globl abort;
+	.align 4;
+	abort:
+		br	r0
+
+	.globl set_context;
+	.align 4;
+	set_context:
+		mts	rpid, r5	/* Shadow TLBs are automatically */
+		nop
+		bri	4		/* flushed by changing PID */
+		rtsd	r15,8
+		nop
+
+#endif
 .end _hw_exception_handler
 
+#ifdef CONFIG_MMU
+/* Unaligned data access exception last on a 4k page for MMU.
+ * When this is called, we are in virtual mode with exceptions enabled
+ * and registers 1-13,15,17,18 saved.
+ *
+ * R3 = ESR
+ * R4 = EAR
+ * R7 = pointer to saved registers (struct pt_regs *regs)
+ *
+ * This handler perform the access, and returns via ret_from_exc.
+ */
+.global _unaligned_data_exception
+.ent _unaligned_data_exception
+_unaligned_data_exception:
+	andi	r8, r3, 0x3E0;	/* Mask and extract the register operand */
+	BSRLI(r8,r8,2);		/* r8 >> 2 = register operand * 8 */
+	andi	r6, r3, 0x400;	/* Extract ESR[S] */
+	bneid	r6, ex_sw_vm;
+	andi	r6, r3, 0x800;	/* Extract ESR[W] - delay slot */
+ex_lw_vm:
+	beqid	r6, ex_lhw_vm;
+	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
+/* Load a word, byte-by-byte from destination address and save it in tmp space*/
+	la	r6, r0, ex_tmp_data_loc_0;
+	sbi	r5, r6, 0;
+	lbui	r5, r4, 1;
+	sbi	r5, r6, 1;
+	lbui	r5, r4, 2;
+	sbi	r5, r6, 2;
+	lbui	r5, r4, 3;
+	sbi	r5, r6, 3;
+	brid	ex_lw_tail_vm;
+/* Get the destination register value into r3 - delay slot */
+	lwi	r3, r6, 0;
+ex_lhw_vm:
+	/* Load a half-word, byte-by-byte from destination address and
+	 * save it in tmp space */
+	la	r6, r0, ex_tmp_data_loc_0;
+	sbi	r5, r6, 0;
+	lbui	r5, r4, 1;
+	sbi	r5, r6, 1;
+	lhui	r3, r6, 0;	/* Get the destination register value into r3 */
+ex_lw_tail_vm:
+	/* Form load_word jump table offset (lw_table_vm + (8 * regnum)) */
+	addik	r5, r8, lw_table_vm;
+	bra	r5;
+ex_lw_end_vm:			/* Exception handling of load word, ends */
+	brai	ret_from_exc;
+ex_sw_vm:
+/* Form store_word jump table offset (sw_table_vm + (8 * regnum)) */
+	addik	r5, r8, sw_table_vm;
+	bra	r5;
+ex_sw_tail_vm:
+	la	r5, r0, ex_tmp_data_loc_0;
+	beqid	r6, ex_shw_vm;
+	swi	r3, r5, 0;	/* Get the word - delay slot */
+	/* Store the word, byte-by-byte into destination address */
+	lbui	r3, r5, 0;
+	sbi	r3, r4, 0;
+	lbui	r3, r5, 1;
+	sbi	r3, r4, 1;
+	lbui	r3, r5, 2;
+	sbi	r3, r4, 2;
+	lbui	r3, r5, 3;
+	brid	ret_from_exc;
+	sbi	r3, r4, 3;	/* Delay slot */
+ex_shw_vm:
+	/* Store the lower half-word, byte-by-byte into destination address */
+	lbui	r3, r5, 2;
+	sbi	r3, r4, 0;
+	lbui	r3, r5, 3;
+	brid	ret_from_exc;
+	sbi	r3, r4, 1;	/* Delay slot */
+ex_sw_end_vm:			/* Exception handling of store word, ends. */
+.end _unaligned_data_exception
+#endif /* CONFIG_MMU */
+
 ex_handler_unhandled:
 /* FIXME add handle function for unhandled exception - dump register */
 	bri 0
 
+/*
+ * hw_exception_handler Jump Table
+ * - Contains code snippets for each register that caused the unalign exception
+ * - Hence exception handler is NOT self-modifying
+ * - Separate table for load exceptions and store exceptions.
+ * - Each table is of size: (8 * 32) = 256 bytes
+ */
+
 .section .text
 .align 4
 lw_table:
@@ -407,7 +1061,11 @@ lw_r27:		R3_TO_LWREG	(27);
 lw_r28:		R3_TO_LWREG	(28);
 lw_r29:		R3_TO_LWREG	(29);
 lw_r30:		R3_TO_LWREG	(30);
+#ifdef CONFIG_MMU
+lw_r31: 	R3_TO_LWREG_V	(31);
+#else
 lw_r31:		R3_TO_LWREG	(31);
+#endif
 
 sw_table:
 sw_r0:		SWREG_TO_R3	(0);
@@ -441,7 +1099,81 @@ sw_r27:		SWREG_TO_R3	(27);
 sw_r28:		SWREG_TO_R3	(28);
 sw_r29:		SWREG_TO_R3	(29);
 sw_r30:		SWREG_TO_R3	(30);
+#ifdef CONFIG_MMU
+sw_r31:		SWREG_TO_R3_V	(31);
+#else
 sw_r31:		SWREG_TO_R3	(31);
+#endif
+
+#ifdef CONFIG_MMU
+lw_table_vm:
+lw_r0_vm:	R3_TO_LWREG_VM		(0);
+lw_r1_vm:	R3_TO_LWREG_VM_V	(1);
+lw_r2_vm:	R3_TO_LWREG_VM_V	(2);
+lw_r3_vm:	R3_TO_LWREG_VM_V	(3);
+lw_r4_vm:	R3_TO_LWREG_VM_V	(4);
+lw_r5_vm:	R3_TO_LWREG_VM_V	(5);
+lw_r6_vm:	R3_TO_LWREG_VM_V	(6);
+lw_r7_vm:	R3_TO_LWREG_VM_V	(7);
+lw_r8_vm:	R3_TO_LWREG_VM_V	(8);
+lw_r9_vm:	R3_TO_LWREG_VM_V	(9);
+lw_r10_vm:	R3_TO_LWREG_VM_V	(10);
+lw_r11_vm:	R3_TO_LWREG_VM_V	(11);
+lw_r12_vm:	R3_TO_LWREG_VM_V	(12);
+lw_r13_vm:	R3_TO_LWREG_VM_V	(13);
+lw_r14_vm:	R3_TO_LWREG_VM		(14);
+lw_r15_vm:	R3_TO_LWREG_VM_V	(15);
+lw_r16_vm:	R3_TO_LWREG_VM		(16);
+lw_r17_vm:	R3_TO_LWREG_VM_V	(17);
+lw_r18_vm:	R3_TO_LWREG_VM_V	(18);
+lw_r19_vm:	R3_TO_LWREG_VM		(19);
+lw_r20_vm:	R3_TO_LWREG_VM		(20);
+lw_r21_vm:	R3_TO_LWREG_VM		(21);
+lw_r22_vm:	R3_TO_LWREG_VM		(22);
+lw_r23_vm:	R3_TO_LWREG_VM		(23);
+lw_r24_vm:	R3_TO_LWREG_VM		(24);
+lw_r25_vm:	R3_TO_LWREG_VM		(25);
+lw_r26_vm:	R3_TO_LWREG_VM		(26);
+lw_r27_vm:	R3_TO_LWREG_VM		(27);
+lw_r28_vm:	R3_TO_LWREG_VM		(28);
+lw_r29_vm:	R3_TO_LWREG_VM		(29);
+lw_r30_vm:	R3_TO_LWREG_VM		(30);
+lw_r31_vm:	R3_TO_LWREG_VM_V	(31);
+
+sw_table_vm:
+sw_r0_vm:	SWREG_TO_R3_VM		(0);
+sw_r1_vm:	SWREG_TO_R3_VM_V	(1);
+sw_r2_vm:	SWREG_TO_R3_VM_V	(2);
+sw_r3_vm:	SWREG_TO_R3_VM_V	(3);
+sw_r4_vm:	SWREG_TO_R3_VM_V	(4);
+sw_r5_vm:	SWREG_TO_R3_VM_V	(5);
+sw_r6_vm:	SWREG_TO_R3_VM_V	(6);
+sw_r7_vm:	SWREG_TO_R3_VM_V	(7);
+sw_r8_vm:	SWREG_TO_R3_VM_V	(8);
+sw_r9_vm:	SWREG_TO_R3_VM_V	(9);
+sw_r10_vm:	SWREG_TO_R3_VM_V	(10);
+sw_r11_vm:	SWREG_TO_R3_VM_V	(11);
+sw_r12_vm:	SWREG_TO_R3_VM_V	(12);
+sw_r13_vm:	SWREG_TO_R3_VM_V	(13);
+sw_r14_vm:	SWREG_TO_R3_VM		(14);
+sw_r15_vm:	SWREG_TO_R3_VM_V	(15);
+sw_r16_vm:	SWREG_TO_R3_VM		(16);
+sw_r17_vm:	SWREG_TO_R3_VM_V	(17);
+sw_r18_vm:	SWREG_TO_R3_VM_V	(18);
+sw_r19_vm:	SWREG_TO_R3_VM		(19);
+sw_r20_vm:	SWREG_TO_R3_VM		(20);
+sw_r21_vm:	SWREG_TO_R3_VM		(21);
+sw_r22_vm:	SWREG_TO_R3_VM		(22);
+sw_r23_vm:	SWREG_TO_R3_VM		(23);
+sw_r24_vm:	SWREG_TO_R3_VM		(24);
+sw_r25_vm:	SWREG_TO_R3_VM		(25);
+sw_r26_vm:	SWREG_TO_R3_VM		(26);
+sw_r27_vm:	SWREG_TO_R3_VM		(27);
+sw_r28_vm:	SWREG_TO_R3_VM		(28);
+sw_r29_vm:	SWREG_TO_R3_VM		(29);
+sw_r30_vm:	SWREG_TO_R3_VM		(30);
+sw_r31_vm:	SWREG_TO_R3_VM_V	(31);
+#endif /* CONFIG_MMU */
 
 /* Temporary data structures used in the handler */
 .section .data
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index a69d3e3c2fd..b15605299a5 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -137,8 +137,8 @@ void __init init_IRQ(void)
 
 	intr_type =
 		*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
-	if (intr_type >= (1 << nr_irq))
-		printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+	if (intr_type >= (1 << (nr_irq + 1)))
+		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 
 #ifdef CONFIG_SELFMOD_INTC
 	selfmod_function((int *) arr_func, intc_baseaddr);
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index 5f71790e3c3..59ff20e33e0 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -45,3 +45,5 @@ extern void __udivsi3(void);
 EXPORT_SYMBOL(__udivsi3);
 extern void __umodsi3(void);
 EXPORT_SYMBOL(__umodsi3);
+extern char *_ebss;
+EXPORT_SYMBOL_GPL(_ebss);
diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S
new file mode 100644
index 00000000000..df16c6287a8
--- /dev/null
+++ b/arch/microblaze/kernel/misc.S
@@ -0,0 +1,120 @@
+/*
+ * Miscellaneous low-level MMU functions.
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ * Derived from arch/ppc/kernel/misc.S
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+	.text
+/*
+ * Flush MMU TLB
+ *
+ * We avoid flushing the pinned 0, 1 and possibly 2 entries.
+ */
+.globl _tlbia;
+.align 4;
+_tlbia:
+	addik	r12, r0, 63 /* flush all entries (63 - 3) */
+	/* isync */
+_tlbia_1:
+	mts	rtlbx, r12
+	nop
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+	addik	r11, r12, -2
+	bneid	r11, _tlbia_1 /* loop for all entries */
+	addik	r12, r12, -1
+	/* sync */
+	rtsd	r15, 8
+	nop
+
+/*
+ * Flush MMU TLB for a particular address (in r5)
+ */
+.globl _tlbie;
+.align 4;
+_tlbie:
+	mts	rtlbsx, r5 /* look up the address in TLB */
+	nop
+	mfs	r12, rtlbx /* Retrieve index */
+	nop
+	blti	r12, _tlbie_1 /* Check if found */
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+_tlbie_1:
+	rtsd	r15, 8
+	nop
+
+/*
+ * Allocate TLB entry for early console
+ */
+.globl early_console_reg_tlb_alloc;
+.align 4;
+early_console_reg_tlb_alloc:
+	/*
+	 * Load a TLB entry for the UART, so that microblaze_progress() can use
+	 * the UARTs nice and early.  We use a 4k real==virtual mapping.
+	 */
+	ori	r4, r0, 63
+	mts	rtlbx, r4 /* TLB slot 2 */
+
+	or	r4,r5,r0
+	andi	r4,r4,0xfffff000
+	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+	andi	r5,r5,0xfffff000
+	ori	r5,r5,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4 /* Load the data portion of the entry */
+	nop
+	mts	rtlbhi,r5 /* Load the tag portion of the entry */
+	nop
+	rtsd	r15, 8
+	nop
+
+/*
+ * Copy a whole page (4096 bytes).
+ */
+#define COPY_16_BYTES		\
+	lwi	r7, r6, 0;	\
+	lwi	r8, r6, 4;	\
+	lwi	r9, r6, 8;	\
+	lwi	r10, r6, 12;	\
+	swi	r7, r5, 0;	\
+	swi	r8, r5, 4;	\
+	swi	r9, r5, 8;	\
+	swi	r10, r5, 12
+
+
+/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
+#define DCACHE_LINE_BYTES (4 * 4)
+
+.globl copy_page;
+.align 4;
+copy_page:
+	ori	r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
+_copy_page_loop:
+	COPY_16_BYTES
+#if DCACHE_LINE_BYTES >= 32
+	COPY_16_BYTES
+#endif
+	addik	r6, r6, DCACHE_LINE_BYTES
+	addik	r5, r5, DCACHE_LINE_BYTES
+	bneid	r11, _copy_page_loop
+	addik	r11, r11, -1
+	rtsd	r15, 8
+	nop
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 07d4fa339ed..00b12c6d532 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -126,9 +126,54 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	else
 		childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
 
+#ifndef CONFIG_MMU
 	memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
 	ti->cpu_context.r1 = (unsigned long)childregs;
 	ti->cpu_context.msr = (unsigned long)childregs->msr;
+#else
+
+	/* if creating a kernel thread then update the current reg (we don't
+	 * want to use the parent's value when restoring by POP_STATE) */
+	if (kernel_mode(regs))
+		/* save new current on stack to use POP_STATE */
+		childregs->CURRENT_TASK = (unsigned long)p;
+	/* if returning to user then use the parent's value of this register */
+
+	/* if we're creating a new kernel thread then just zeroing all
+	 * the registers. That's OK for a brand new thread.*/
+	/* Pls. note that some of them will be restored in POP_STATE */
+	if (kernel_mode(regs))
+		memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+	/* if this thread is created for fork/vfork/clone, then we want to
+	 * restore all the parent's context */
+	/* in addition to the registers which will be restored by POP_STATE */
+	else {
+		ti->cpu_context = *(struct cpu_context *)regs;
+		childregs->msr |= MSR_UMS;
+	}
+
+	/* FIXME STATE_SAVE_PT_OFFSET; */
+	ti->cpu_context.r1  = (unsigned long)childregs - STATE_SAVE_ARG_SPACE;
+	/* we should consider the fact that childregs is a copy of the parent
+	 * regs which were saved immediately after entering the kernel state
+	 * before enabling VM. This MSR will be restored in switch_to and
+	 * RETURN() and we want to have the right machine state there
+	 * specifically this state must have INTs disabled before and enabled
+	 * after performing rtbd
+	 * compose the right MSR for RETURN(). It will work for switch_to also
+	 * excepting for VM and UMS
+	 * don't touch UMS , CARRY and cache bits
+	 * right now MSR is a copy of parent one */
+	childregs->msr |= MSR_BIP;
+	childregs->msr &= ~MSR_EIP;
+	childregs->msr |= MSR_IE;
+	childregs->msr &= ~MSR_VM;
+	childregs->msr |= MSR_VMS;
+	childregs->msr |= MSR_EE; /* exceptions will be enabled*/
+
+	ti->cpu_context.msr = (childregs->msr|MSR_VM);
+	ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+#endif
 	ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
 
 	if (clone_flags & CLONE_SETTLS)
@@ -137,6 +182,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	return 0;
 }
 
+#ifndef CONFIG_MMU
 /*
  * Return saved PC of a blocked thread.
  */
@@ -151,6 +197,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	else
 		return ctx->r14;
 }
+#endif
 
 static void kernel_thread_helper(int (*fn)(void *), void *arg)
 {
@@ -173,6 +220,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 			&regs, 0, NULL, NULL);
 }
+EXPORT_SYMBOL_GPL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *p)
 {
@@ -188,3 +236,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 	regs->r1 = usp;
 	regs->pt_mode = 0;
 }
+
+#ifdef CONFIG_MMU
+#include <linux/elfcore.h>
+/*
+ * Set up a thread for executing a new program
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+	return 0; /* MicroBlaze has no separate FPU registers */
+}
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 34c48718061..c005cc6f1aa 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -509,12 +509,13 @@ static void __init early_init_dt_check_for_initrd(unsigned long node)
 
 	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
 	if (prop) {
-		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+		initrd_start = (unsigned long)
+					__va((u32)of_read_ulong(prop, l/4));
 
 		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
 		if (prop) {
 			initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, l/4));
+					__va((u32)of_read_ulong(prop, 1/4));
 			initrd_below_start_ok = 1;
 		} else {
 			initrd_start = 0;
@@ -563,7 +564,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
 
 #ifdef CONFIG_CMDLINE
+#ifndef CONFIG_CMDLINE_FORCE
 	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+#endif
 		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 #endif /* CONFIG_CMDLINE */
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index eb6b41758e2..8709bea0960 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -42,10 +42,6 @@ char cmd_line[COMMAND_LINE_SIZE];
 
 void __init setup_arch(char **cmdline_p)
 {
-#ifdef CONFIG_CMDLINE_FORCE
-	strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-	strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
 	*cmdline_p = cmd_line;
 
 	console_verbose();
@@ -102,14 +98,34 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 {
 	unsigned long *src, *dst = (unsigned long *)0x0;
 
+	/* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the
+	 * end of kernel. There are two position which we want to check.
+	 * The first is __init_end and the second __bss_start.
+	 */
+#ifdef CONFIG_MTD_UCLINUX
+	int romfs_size;
+	unsigned int romfs_base;
+	char *old_klimit = klimit;
+
+	romfs_base = (ram ? ram : (unsigned int)&__init_end);
+	romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	if (!romfs_size) {
+		romfs_base = (unsigned int)&__bss_start;
+		romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	}
+
+	/* Move ROMFS out of BSS before clearing it */
+	if (romfs_size > 0) {
+		memmove(&_ebss, (int *)romfs_base, romfs_size);
+		klimit += romfs_size;
+	}
+#endif
+
 /* clearing bss section */
 	memset(__bss_start, 0, __bss_stop-__bss_start);
 	memset(_ssbss, 0, _esbss-_ssbss);
 
-	/*
-	 * Copy command line passed from bootloader, or use default
-	 * if none provided, or forced
-	 */
+	/* Copy command line passed from bootloader */
 #ifndef CONFIG_CMDLINE_BOOL
 	if (cmdline && cmdline[0] != '\0')
 		strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
@@ -126,27 +142,15 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
 
 #ifdef CONFIG_MTD_UCLINUX
-	{
-		int size;
-		unsigned int romfs_base;
-		romfs_base = (ram ? ram : (unsigned int)&__init_end);
-		/* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the
-		 * end of kernel, which is ROMFS_LOCATION defined above. */
-		size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
-		early_printk("Found romfs @ 0x%08x (0x%08x)\n",
-				romfs_base, size);
-		early_printk("#### klimit %p ####\n", klimit);
-		BUG_ON(size < 0); /* What else can we do? */
-
-		/* Use memmove to handle likely case of memory overlap */
-		early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n",
-			size, romfs_base, (unsigned)&_ebss);
-		memmove(&_ebss, (int *)romfs_base, size);
-
-		/* update klimit */
-		klimit += PAGE_ALIGN(size);
-		early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
-	}
+	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+			romfs_base, romfs_size);
+	early_printk("#### klimit %p ####\n", old_klimit);
+	BUG_ON(romfs_size < 0); /* What else can we do? */
+
+	early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+			romfs_size, romfs_base, (unsigned)&_ebss);
+
+	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 40d36931e36..4c0e6521b11 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -152,8 +152,8 @@ struct rt_sigframe {
 	unsigned long tramp[2];	/* signal trampoline */
 };
 
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
+static int restore_sigcontext(struct pt_regs *regs,
+				struct sigcontext __user *sc, int *rval_p)
 {
 	unsigned int err = 0;
 
@@ -211,11 +211,10 @@ badframe:
 
 asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 {
-	struct rt_sigframe *frame =
-			(struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+	struct rt_sigframe __user *frame =
+		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
 
 	sigset_t set;
-	stack_t st;
 	int rval;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -233,11 +232,10 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
 		goto badframe;
 
-	if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
 	/* It is more difficult to avoid calling this function than to
 	 call it and ignore errors. */
-	do_sigaltstack(&st, NULL, regs->r1);
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+		goto badframe;
 
 	return rval;
 
@@ -251,7 +249,7 @@ badframe:
  */
 
 static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		unsigned long mask)
 {
 	int err = 0;
@@ -278,7 +276,7 @@ setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
 /*
  * Determine which stack to use..
  */
-static inline void *
+static inline void __user *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
 	/* Default to using normal stack */
@@ -287,87 +285,13 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-					sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace. If provided, use a stub
-	 already in userspace. */
-	/* minus 8 is offset to cater for "rtsd r15,8" offset */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* Note, these encodings are _big endian_! */
-
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
-
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
-
-	/* Signal handler args: */
-	regs->r5 = signal; /* Arg 0: signum */
-	regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
-
-	/* Offset of 4 to handle microblaze rtid r14, 0 */
-	regs->pc = (unsigned long)ka->sa.sa_handler;
-
-	set_fs(USER_DS);
-
-#ifdef DEBUG_SIG
-	printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
-		current->comm, current->pid, frame, regs->pc);
-#endif
-
-	return;
-
-give_sigsegv:
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	force_sig(SIGSEGV, current);
+	return (void __user *)((sp - frame_size) & -8UL);
 }
 
 static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			sigset_t *set, struct pt_regs *regs)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 	int signal;
 
@@ -382,7 +306,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		? current_thread_info()->exec_domain->signal_invmap[sig]
 		: sig;
 
-	err |= copy_siginfo_to_user(&frame->info, info);
+	if (info)
+		err |= copy_siginfo_to_user(&frame->info, info);
 
 	/* Create the ucontext. */
 	err |= __put_user(0, &frame->uc.uc_flags);
@@ -463,7 +388,15 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 	case -ERESTARTNOINTR:
 do_restart:
 		/* offset of 4 bytes to re-execute trap (brki) instruction */
+#ifndef CONFIG_MMU
 		regs->pc -= 4;
+#else
+		/* offset of 8 bytes required = 4 for rtbd
+		   offset, plus 4 for size of
+			"brki r14,8"
+		   instruction. */
+		regs->pc -= 8;
+#endif
 		break;
 	}
 }
@@ -480,7 +413,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	if (ka->sa.sa_flags & SA_SIGINFO)
 		setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		setup_frame(sig, ka, oldset, regs);
+		setup_rt_frame(sig, ka, NULL, oldset, regs);
 
 	if (ka->sa.sa_flags & SA_ONESHOT)
 		ka->sa.sa_handler = SIG_DFL;
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 3bb42ec924c..376d1789f7c 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -2,7 +2,11 @@ ENTRY(sys_call_table)
 	.long sys_restart_syscall	/* 0 - old "setup()" system call,
 					 * used for restarting */
 	.long sys_exit
-	.long sys_ni_syscall		/* was fork */
+#ifdef CONFIG_MMU
+	.long sys_fork_wrapper
+#else
+	.long sys_ni_syscall
+#endif
 	.long sys_read
 	.long sys_write
 	.long sys_open			/* 5 */
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index 293ef486013..eaaaf805f31 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -22,14 +22,6 @@ void trap_init(void)
 	__enable_hw_exceptions();
 }
 
-void __bad_xchg(volatile void *ptr, int size)
-{
-	printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
-		__builtin_return_address(0), ptr, size);
-	BUG();
-}
-EXPORT_SYMBOL(__bad_xchg);
-
 static int kstack_depth_to_print = 24;
 
 static int __init kstack_setup(char *s)
@@ -105,3 +97,37 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_MMU
+void __bug(const char *file, int line, void *data)
+{
+	if (data)
+		printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
+			file, line, data);
+	else
+		printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
+
+	machine_halt();
+}
+
+int bad_trap(int trap_num, struct pt_regs *regs)
+{
+	printk(KERN_CRIT
+		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
+		trap_num, regs->pc, current->pid);
+	return -ENOSYS;
+}
+
+int debug_trap(struct pt_regs *regs)
+{
+	int i;
+	printk(KERN_CRIT "debug trap\n");
+	for (i = 0; i < 32; i++) {
+		/* printk("r%i:%08X\t",i,regs->gpr[i]); */
+		if ((i % 4) == 3)
+			printk(KERN_CRIT "\n");
+	}
+	printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
+	return -ENOSYS;
+}
+#endif
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 840385e5129..8ae807ab7a5 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -17,8 +17,7 @@ ENTRY(_start)
 jiffies = jiffies_64 + 4;
 
 SECTIONS {
-	. = CONFIG_KERNEL_BASE_ADDR;
-
+	. = CONFIG_KERNEL_START;
 	.text : {
 		_text = . ;
 		_stext = . ;
@@ -132,6 +131,8 @@ SECTIONS {
 		__con_initcall_end = .;
 	}
 
+	SECURITY_INIT
+
 	__init_end_before_initramfs = .;
 
 	.init.ramfs ALIGN(4096) : {
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index d27126bf306..71c8cb6c9e4 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -10,4 +10,5 @@ else
 lib-y += memcpy.o memmove.o
 endif
 
-lib-y +=  uaccess.o
+lib-$(CONFIG_NO_MMU) += uaccess.o
+lib-$(CONFIG_MMU) += uaccess_old.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
index 809340070a1..f08e7459141 100644
--- a/arch/microblaze/lib/checksum.c
+++ b/arch/microblaze/lib/checksum.c
@@ -32,9 +32,10 @@
 /* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
  kills, so most of the assembly has to go. */
 
-#include <net/checksum.h>
-#include <asm/checksum.h>
 #include <linux/module.h>
+#include <net/checksum.h>
+
+#include <asm/byteorder.h>
 
 static inline unsigned short from32to16(unsigned long x)
 {
@@ -102,6 +103,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph, ihl*4);
 }
+EXPORT_SYMBOL(ip_fast_csum);
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -115,15 +117,16 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
  *
  * it's best to have buff aligned on a 32-bit boundary
  */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
+__wsum csum_partial(const void *buff, int len, __wsum wsum)
 {
+	unsigned int sum = (__force unsigned int)wsum;
 	unsigned int result = do_csum(buff, len);
 
 	/* add in old sum, and carry.. */
 	result += sum;
 	if (sum > result)
 		result += 1;
-	return result;
+	return (__force __wsum)result;
 }
 EXPORT_SYMBOL(csum_partial);
 
@@ -131,9 +134,9 @@ EXPORT_SYMBOL(csum_partial);
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-__sum16 ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
 {
-	return ~do_csum(buff, len);
+	return (__force __sum16)~do_csum(buff, len);
 }
 EXPORT_SYMBOL(ip_compute_csum);
 
@@ -141,12 +144,18 @@ EXPORT_SYMBOL(ip_compute_csum);
  * copy from fs while checksumming, otherwise like csum_partial
  */
 __wsum
-csum_partial_copy_from_user(const char __user *src, char *dst, int len,
-						int sum, int *csum_err)
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+						__wsum sum, int *csum_err)
 {
-	if (csum_err)
+	int missing;
+
+	missing = __copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*csum_err = -EFAULT;
+	} else
 		*csum_err = 0;
-	memcpy(dst, src, len);
+
 	return csum_partial(dst, len, sum);
 }
 EXPORT_SYMBOL(csum_partial_copy_from_user);
@@ -155,7 +164,7 @@ EXPORT_SYMBOL(csum_partial_copy_from_user);
  * copy from ds while checksumming, otherwise like csum_partial
  */
 __wsum
-csum_partial_copy(const char *src, char *dst, int len, int sum)
+csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
 {
 	memcpy(dst, src, len);
 	return csum_partial(dst, len, sum);
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 5880119c448..6a907c58a4b 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -154,8 +154,3 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 }
 EXPORT_SYMBOL(memcpy);
 #endif /* __HAVE_ARCH_MEMCPY */
-
-void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c)
-{
-	return memcpy(d, s, c);
-}
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
new file mode 100644
index 00000000000..67f991c14b8
--- /dev/null
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2007 LynuxWorks, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+
+/*
+ * int __strncpy_user(char *to, char *from, int len);
+ *
+ * Returns:
+ *  -EFAULT  for an exception
+ *  len      if we hit the buffer limit
+ *  bytes copied
+ */
+
+	.text
+.globl __strncpy_user;
+.align 4;
+__strncpy_user:
+
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7 - len
+	 * r3 - temp count
+	 * r4 - temp val
+	 */
+	addik	r3,r7,0		/* temp_count = len */
+	beqi	r3,3f
+1:
+	lbu	r4,r6,r0
+	sb	r4,r5,r0
+
+	addik	r3,r3,-1
+	beqi	r3,2f		/* break on len */
+
+	addik	r5,r5,1
+	bneid	r4,1b
+	addik	r6,r6,1		/* delay slot */
+	addik	r3,r3,1		/* undo "temp_count--" */
+2:
+	rsubk	r3,r3,r7	/* temp_count = len - temp_count */
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	.fixup, "ax"
+	.align	2
+4:
+	brid	3b
+	addik	r3,r0, -EFAULT
+
+	.section	__ex_table, "a"
+	.word	1b,4b
+
+/*
+ * int __strnlen_user(char __user *str, int maxlen);
+ *
+ * Returns:
+ *  0 on error
+ *  maxlen + 1  if no NUL byte found within maxlen bytes
+ *  size of the string (including NUL byte)
+ */
+
+	.text
+.globl __strnlen_user;
+.align 4;
+__strnlen_user:
+	addik	r3,r6,0
+	beqi	r3,3f
+1:
+	lbu	r4,r5,r0
+	beqid	r4,2f		/* break on NUL */
+	addik	r3,r3,-1	/* delay slot */
+
+	bneid	r3,1b
+	addik	r5,r5,1		/* delay slot */
+
+	addik	r3,r3,-1	/* for break on len */
+2:
+	rsubk	r3,r3,r6
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	.fixup,"ax"
+4:
+	brid	3b
+	addk	r3,r0,r0
+
+	.section	__ex_table,"a"
+	.word	1b,4b
+
+/*
+ * int __copy_tofrom_user(char *to, char *from, int len)
+ * Return:
+ *   0 on success
+ *   number of not copied bytes on error
+ */
+	.text
+.globl __copy_tofrom_user;
+.align 4;
+__copy_tofrom_user:
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7, r3 - count
+	 * r4 - tempval
+	 */
+	addik	r3,r7,0
+	beqi	r3,3f
+1:
+	lbu	r4,r6,r0
+	addik	r6,r6,1
+2:
+	sb	r4,r5,r0
+	addik	r3,r3,-1
+	bneid	r3,1b
+	addik	r5,r5,1		/* delay slot */
+3:
+	rtsd	r15,8
+	nop
+
+
+	.section	__ex_table,"a"
+	.word	1b,3b,2b,3b
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
index bf9e4479a1f..6c8a924d9e2 100644
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -3,3 +3,5 @@
 #
 
 obj-y := init.o
+
+obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
new file mode 100644
index 00000000000..5e67cd1fab4
--- /dev/null
+++ b/arch/microblaze/mm/fault.c
@@ -0,0 +1,304 @@
+/*
+ *  arch/microblaze/mm/fault.c
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from "arch/ppc/mm/fault.c"
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/i386/mm/fault.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  Modified by Cort Dougan and Paul Mackerras.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <asm/exceptions.h>
+
+#if defined(CONFIG_KGDB)
+int debugger_kernel_faults = 1;
+#endif
+
+static unsigned long pte_misses;	/* updated by do_page_fault() */
+static unsigned long pte_errors;	/* updated by do_page_fault() */
+
+/*
+ * Check whether the instruction at regs->pc is a store using
+ * an update addressing form which will update r1.
+ */
+static int store_updates_sp(struct pt_regs *regs)
+{
+	unsigned int inst;
+
+	if (get_user(inst, (unsigned int *)regs->pc))
+		return 0;
+	/* check for 1 in the rD field */
+	if (((inst >> 21) & 0x1f) != 1)
+		return 0;
+	/* check for store opcodes */
+	if ((inst & 0xd0000000) == 0xd0000000)
+		return 1;
+	return 0;
+}
+
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from do_page_fault above and from some of the procedures
+ * in traps.c.
+ */
+static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+	const struct exception_table_entry *fixup;
+/* MS: no context */
+	/* Are we prepared to handle this fault?  */
+	fixup = search_exception_tables(regs->pc);
+	if (fixup) {
+		regs->pc = fixup->fixup;
+		return;
+	}
+
+	/* kernel has accessed a bad area */
+#if defined(CONFIG_KGDB)
+	if (debugger_kernel_faults)
+		debugger(regs);
+#endif
+	die("kernel access of bad area", regs, sig);
+}
+
+/*
+ * The error_code parameter is ESR for a data fault,
+ * 0 for an instruction fault.
+ */
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	siginfo_t info;
+	int code = SEGV_MAPERR;
+	int is_write = error_code & ESR_S;
+	int fault;
+
+	regs->ear = address;
+	regs->esr = error_code;
+
+	/* On a kernel SLB miss we can only check for a valid exception entry */
+	if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+		printk(KERN_WARNING "kernel task_size exceed");
+		_exception(SIGSEGV, regs, code, address);
+	}
+
+	/* for instr TLB miss and instr storage exception ESR_S is undefined */
+	if ((error_code & 0x13) == 0x13 || (error_code & 0x11) == 0x11)
+		is_write = 0;
+
+#if defined(CONFIG_KGDB)
+	if (debugger_fault_handler && regs->trap == 0x300) {
+		debugger_fault_handler(regs);
+		return;
+	}
+#endif /* CONFIG_KGDB */
+
+	if (in_atomic() || mm == NULL) {
+		/* FIXME */
+		if (kernel_mode(regs)) {
+			printk(KERN_EMERG
+				"Page fault in kernel mode - Oooou!!! pid %d\n",
+				current->pid);
+			_exception(SIGSEGV, regs, code, address);
+			return;
+		}
+		/* in_atomic() in user mode is really bad,
+		   as is current->mm == NULL. */
+		printk(KERN_EMERG "Page fault in user mode with "
+		       "in_atomic(), mm = %p\n", mm);
+		printk(KERN_EMERG "r15 = %lx  MSR = %lx\n",
+		       regs->r15, regs->msr);
+		die("Weird page fault", regs, SIGSEGV);
+	}
+
+	/* When running in the kernel we expect faults to occur only to
+	 * addresses in user space.  All other faults represent errors in the
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
+	 * erroneous fault occurring in a code path which already holds mmap_sem
+	 * we will deadlock attempting to validate the fault against the
+	 * address space.  Luckily the kernel only validly references user
+	 * space from well defined areas of code, which are listed in the
+	 * exceptions table.
+	 *
+	 * As the vast majority of faults will be valid we will only perform
+	 * the source reference check when there is a possibility of a deadlock.
+	 * Attempt to lock the address space, if we cannot we then validate the
+	 * source.  If this is invalid we can skip the address space check,
+	 * thus avoiding the deadlock.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if (kernel_mode(regs) && !search_exception_tables(regs->pc))
+			goto bad_area_nosemaphore;
+
+		down_read(&mm->mmap_sem);
+	}
+
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+
+	if (vma->vm_start <= address)
+		goto good_area;
+
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (!is_write)
+		goto bad_area;
+
+	/*
+	 * N.B. The ABI allows programs to access up to
+	 * a few hundred bytes below the stack pointer (TBD).
+	 * The kernel signal delivery code writes up to about 1.5kB
+	 * below the stack pointer (r1) before decrementing it.
+	 * The exec code can write slightly over 640kB to the stack
+	 * before setting the user r1.  Thus we allow the stack to
+	 * expand to 1MB without further checks.
+	 */
+	if (address + 0x100000 < vma->vm_end) {
+
+		/* get user regs even if this fault is in kernel mode */
+		struct pt_regs *uregs = current->thread.regs;
+		if (uregs == NULL)
+			goto bad_area;
+
+		/*
+		 * A user-mode access to an address a long way below
+		 * the stack pointer is only valid if the instruction
+		 * is one which would update the stack pointer to the
+		 * address accessed if the instruction completed,
+		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+		 * (or the byte, halfword, float or double forms).
+		 *
+		 * If we don't check this then any write to the area
+		 * between the last mapped region and the stack will
+		 * expand the stack rather than segfaulting.
+		 */
+		if (address + 2048 < uregs->r1
+			&& (kernel_mode(regs) || !store_updates_sp(regs)))
+				goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+good_area:
+	code = SEGV_ACCERR;
+
+	/* a write */
+	if (is_write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	/* a read */
+	} else {
+		/* protection fault */
+		if (error_code & 0x08000000)
+			goto bad_area;
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+survive:
+	fault = handle_mm_fault(mm, vma, address, is_write);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		current->maj_flt++;
+	else
+		current->min_flt++;
+	up_read(&mm->mmap_sem);
+	/*
+	 * keep track of tlb+htab misses that are good addrs but
+	 * just need pte's created via handle_mm_fault()
+	 * -- Cort
+	 */
+	pte_misses++;
+	return;
+
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	pte_errors++;
+
+	/* User mode accesses cause a SIGSEGV */
+	if (user_mode(regs)) {
+		_exception(SIGSEGV, regs, code, address);
+/*		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		info.si_code = code;
+		info.si_addr = (void *) address;
+		force_sig_info(SIGSEGV, &info, current);*/
+		return;
+	}
+
+	bad_page_fault(regs, address, SIGSEGV);
+	return;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	if (current->pid == 1) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	up_read(&mm->mmap_sem);
+	printk(KERN_WARNING "VM: killing process %s\n", current->comm);
+	if (user_mode(regs))
+		do_exit(SIGKILL);
+	bad_page_fault(regs, address, SIGKILL);
+	return;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+	if (user_mode(regs)) {
+		info.si_signo = SIGBUS;
+		info.si_errno = 0;
+		info.si_code = BUS_ADRERR;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
+		return;
+	}
+	bad_page_fault(regs, address, SIGBUS);
+}
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b0c8213cd6c..b5a701cd71e 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -23,8 +23,16 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+#ifndef CONFIG_MMU
 unsigned int __page_offset;
-/* EXPORT_SYMBOL(__page_offset); */
+EXPORT_SYMBOL(__page_offset);
+
+#else
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+int mem_init_done;
+static int init_bootmem_done;
+#endif /* CONFIG_MMU */
 
 char *klimit = _end;
 
@@ -32,28 +40,26 @@ char *klimit = _end;
  * Initialize the bootmem system and give it all the memory we
  * have available.
  */
-unsigned int memory_start;
-unsigned int memory_end; /* due to mm/nommu.c */
-unsigned int memory_size;
+unsigned long memory_start;
+unsigned long memory_end; /* due to mm/nommu.c */
+unsigned long memory_size;
 
 /*
  * paging_init() sets up the page tables - in fact we've already done this.
  */
 static void __init paging_init(void)
 {
-	int i;
 	unsigned long zones_size[MAX_NR_ZONES];
 
+	/* Clean every zones */
+	memset(zones_size, 0, sizeof(zones_size));
+
 	/*
 	 * old: we can DMA to/from any address.put all page into ZONE_DMA
 	 * We use only ZONE_NORMAL
 	 */
 	zones_size[ZONE_NORMAL] = max_mapnr;
 
-	/* every other zones are empty */
-	for (i = 1; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
 	free_area_init(zones_size);
 }
 
@@ -61,6 +67,7 @@ void __init setup_memory(void)
 {
 	int i;
 	unsigned long map_size;
+#ifndef CONFIG_MMU
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
@@ -93,6 +100,7 @@ void __init setup_memory(void)
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
 
+#endif
 	/*
 	 * Kernel:
 	 * start: base phys address of kernel - page align
@@ -121,9 +129,13 @@ void __init setup_memory(void)
 	 * for 4GB of memory, using 4kB pages), plus 1 page
 	 * (in case the address isn't page-aligned).
 	 */
+#ifndef CONFIG_MMU
 	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
 					min_low_pfn, max_low_pfn);
-
+#else
+	map_size = init_bootmem_node(&contig_page_data,
+		PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+#endif
 	lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
@@ -137,6 +149,9 @@ void __init setup_memory(void)
 		reserve_bootmem(lmb.reserved.region[i].base,
 			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
+#ifdef CONFIG_MMU
+	init_bootmem_done = 1;
+#endif
 	paging_init();
 }
 
@@ -191,11 +206,145 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
 	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
+#ifdef CONFIG_MMU
+	mem_init_done = 1;
+#endif
 }
 
+#ifndef CONFIG_MMU
 /* Check against bounds of physical memory */
 int ___range_ok(unsigned long addr, unsigned long size)
 {
 	return ((addr < memory_start) ||
 		((addr + size) > memory_end));
 }
+EXPORT_SYMBOL(___range_ok);
+
+#else
+int page_is_ram(unsigned long pfn)
+{
+	return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void mm_cmdline_setup(void)
+{
+	unsigned long maxmem = 0;
+	char *p = cmd_line;
+
+	/* Look for mem= option on command line */
+	p = strstr(cmd_line, "mem=");
+	if (p) {
+		p += 4;
+		maxmem = memparse(p, &p);
+		if (maxmem && memory_size > maxmem) {
+			memory_size = maxmem;
+			memory_end = memory_start + memory_size;
+			lmb.memory.region[0].size = memory_size;
+		}
+	}
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+	/*
+	 * The Zone Protection Register (ZPR) defines how protection will
+	 * be applied to every page which is a member of a given zone. At
+	 * present, we utilize only two of the zones.
+	 * The zone index bits (of ZSEL) in the PTE are used for software
+	 * indicators, except the LSB.  For user access, zone 1 is used,
+	 * for kernel access, zone 0 is used.  We set all but zone 1
+	 * to zero, allowing only kernel access as indicated in the PTE.
+	 * For zone 1, we set a 01 binary (a value of 10 will not work)
+	 * to allow user access as indicated in the PTE.  This also allows
+	 * kernel access as indicated in the PTE.
+	 */
+	__asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+			"mts rzpr, r11;"
+			: : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+	unsigned int kstart, ksize;
+
+	if (!lmb.reserved.cnt) {
+		printk(KERN_EMERG "Error memory count\n");
+		machine_restart(NULL);
+	}
+
+	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+		printk(KERN_EMERG "Memory must be greater than 16MB\n");
+		machine_restart(NULL);
+	}
+	/* Find main memory where the kernel is */
+	memory_start = (u32) lmb.memory.region[0].base;
+	memory_end = (u32) lmb.memory.region[0].base +
+				(u32) lmb.memory.region[0].size;
+	memory_size = memory_end - memory_start;
+
+	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+	/*
+	 * Map out the kernel text/data/bss from the available physical
+	 * memory.
+	 */
+	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+	/* kernel size */
+	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+	lmb_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/* Remove the init RAM disk from the available memory. */
+/*	if (initrd_start) {
+		mem_pieces_remove(&phys_avail, __pa(initrd_start),
+				  initrd_end - initrd_start, 1);
+	}*/
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	/* Initialize the MMU hardware */
+	mmu_init_hw();
+
+	/* Map in all of RAM starting at CONFIG_KERNEL_START */
+	mapin_ram();
+
+#ifdef HIGHMEM_START_BOOL
+	ioremap_base = HIGHMEM_START;
+#else
+	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+	ioremap_bot = ioremap_base;
+
+	/* Initialize the context management stuff */
+	mmu_context_init();
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+	void *p;
+	if (init_bootmem_done) {
+		p = alloc_bootmem_pages(PAGE_SIZE);
+	} else {
+		/*
+		 * Mem start + 32MB -> here is limit
+		 * because of mem mapping from head.S
+		 */
+		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+					memory_start + 0x2000000));
+	}
+	return p;
+}
+#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/mm/mmu_context.c b/arch/microblaze/mm/mmu_context.c
new file mode 100644
index 00000000000..26ff82f4fa8
--- /dev/null
+++ b/arch/microblaze/mm/mmu_context.c
@@ -0,0 +1,70 @@
+/*
+ * This file contains the routines for handling the MMU.
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from arch/ppc/mm/4xx_mmu.c:
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+	/*
+	 * The use of context zero is reserved for the kernel.
+	 * This code assumes FIRST_CONTEXT < 32.
+	 */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :).  This would be the
+ * place to implement an LRU scheme if anyone were motivated to do it.
+ */
+void steal_context(void)
+{
+	struct mm_struct *mm;
+
+	/* free up context `next_mmu_context' */
+	/* if we shouldn't free context 0, don't... */
+	if (next_mmu_context < FIRST_CONTEXT)
+		next_mmu_context = FIRST_CONTEXT;
+	mm = context_mm[next_mmu_context];
+	flush_tlb_mm(mm);
+	destroy_context(mm);
+}
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
new file mode 100644
index 00000000000..46c4ca5d15c
--- /dev/null
+++ b/arch/microblaze/mm/pgtable.c
@@ -0,0 +1,286 @@
+/*
+ *  This file contains the routines setting up the linux page tables.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ *
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ *  Derived from arch/ppc/mm/pgtable.c:
+ *    -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file COPYING in the main directory of this
+ *  archive for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/sections.h>
+
+#define flush_HPTE(X, va, pg)	_tlbie(va)
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+
+/* The maximum lowmem defaults to 768Mb, but this can be configured to
+ * another value.
+ */
+#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
+
+#ifndef CONFIG_SMP
+struct pgtable_cache_struct quicklists;
+#endif
+
+static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
+		unsigned long flags)
+{
+	unsigned long v, i;
+	phys_addr_t p;
+	int err;
+
+	/*
+	 * Choose an address to map it to.
+	 * Once the vmalloc system is running, we use it.
+	 * Before then, we use space going down from ioremap_base
+	 * (ioremap_bot records where we're up to).
+	 */
+	p = addr & PAGE_MASK;
+	size = PAGE_ALIGN(addr + size) - p;
+
+	/*
+	 * Don't allow anybody to remap normal RAM that we're using.
+	 * mem_init() sets high_memory so only do the check after that.
+	 *
+	 * However, allow remap of rootfs: TBD
+	 */
+	if (mem_init_done &&
+		p >= memory_start && p < virt_to_phys(high_memory) &&
+		!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
+		p < virt_to_phys((unsigned long)__bss_stop))) {
+		printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT
+			" is RAM lr %p\n", (unsigned long)p,
+			__builtin_return_address(0));
+		return NULL;
+	}
+
+	if (size == 0)
+		return NULL;
+
+	/*
+	 * Is it already mapped? If the whole area is mapped then we're
+	 * done, otherwise remap it since we want to keep the virt addrs for
+	 * each request contiguous.
+	 *
+	 * We make the assumption here that if the bottom and top
+	 * of the range we want are mapped then it's mapped to the
+	 * same virt address (and this is contiguous).
+	 *  -- Cort
+	 */
+
+	if (mem_init_done) {
+		struct vm_struct *area;
+		area = get_vm_area(size, VM_IOREMAP);
+		if (area == NULL)
+			return NULL;
+		v = VMALLOC_VMADDR(area->addr);
+	} else {
+		v = (ioremap_bot -= size);
+	}
+
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+	if (flags & _PAGE_NO_CACHE)
+		flags |= _PAGE_GUARDED;
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(v + i, p + i, flags);
+	if (err) {
+		if (mem_init_done)
+			vfree((void *)v);
+		return NULL;
+	}
+
+	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void __iomem *ioremap(phys_addr_t addr, unsigned long size)
+{
+	return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+EXPORT_SYMBOL(ioremap);
+
+void iounmap(void *addr)
+{
+	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
+		vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
+EXPORT_SYMBOL(iounmap);
+
+
+int map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+	pmd_t *pd;
+	pte_t *pg;
+	int err = -ENOMEM;
+	/* spin_lock(&init_mm.page_table_lock); */
+	/* Use upper 10 bits of VA to index the first level map */
+	pd = pmd_offset(pgd_offset_k(va), va);
+	/* Use middle 10 bits of VA to index the second-level map */
+	pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */
+	/* pg = pte_alloc_kernel(&init_mm, pd, va); */
+
+	if (pg != NULL) {
+		err = 0;
+		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
+				__pgprot(flags)));
+		if (mem_init_done)
+			flush_HPTE(0, va, pmd_val(*pd));
+			/* flush_HPTE(0, va, pg); */
+
+	}
+	/* spin_unlock(&init_mm.page_table_lock); */
+	return err;
+}
+
+void __init adjust_total_lowmem(void)
+{
+/* TBD */
+#if 0
+	unsigned long max_low_mem = MAX_LOW_MEM;
+
+	if (total_lowmem > max_low_mem) {
+		total_lowmem = max_low_mem;
+#ifndef CONFIG_HIGHMEM
+		printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
+				"CONFIG_HIGHMEM to reach %ld Mb\n",
+				max_low_mem >> 20, total_memory >> 20);
+		total_memory = total_lowmem;
+#endif /* CONFIG_HIGHMEM */
+	}
+#endif
+}
+
+static void show_tmem(unsigned long tmem)
+{
+	volatile unsigned long a;
+	a = a + tmem;
+}
+
+/*
+ * Map in all of physical memory starting at CONFIG_KERNEL_START.
+ */
+void __init mapin_ram(void)
+{
+	unsigned long v, p, s, f;
+
+	v = CONFIG_KERNEL_START;
+	p = memory_start;
+	show_tmem(memory_size);
+	for (s = 0; s < memory_size; s += PAGE_SIZE) {
+		f = _PAGE_PRESENT | _PAGE_ACCESSED |
+				_PAGE_SHARED | _PAGE_HWEXEC;
+		if ((char *) v < _stext || (char *) v >= _etext)
+			f |= _PAGE_WRENABLE;
+		else
+			/* On the MicroBlaze, no user access
+			   forces R/W kernel access */
+			f |= _PAGE_USER;
+		map_page(v, p, f);
+		v += PAGE_SIZE;
+		p += PAGE_SIZE;
+	}
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x)	((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/*
+ * Set up a mapping for a block of I/O.
+ * virt, phys, size must all be page-aligned.
+ * This should only be called before ioremap is called.
+ */
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+			     unsigned int size, int flags)
+{
+	int i;
+
+	if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
+		ioremap_bot = ioremap_base = virt;
+
+	/* Put it in the page tables. */
+	for (i = 0; i < size; i += PAGE_SIZE)
+		map_page(virt + i, phys + i, flags);
+}
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise.  The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+	pgd_t	*pgd;
+	pmd_t	*pmd;
+	pte_t	*pte;
+	int     retval = 0;
+
+	pgd = pgd_offset(mm, addr & PAGE_MASK);
+	if (pgd) {
+		pmd = pmd_offset(pgd, addr & PAGE_MASK);
+		if (pmd_present(*pmd)) {
+			pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
+			if (pte) {
+				retval = 1;
+				*ptep = pte;
+			}
+		}
+	}
+	return retval;
+}
+
+/* Find physical address for this virtual address.  Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+	unsigned long pa;
+
+	pte_t *pte;
+	struct mm_struct *mm;
+
+	/* Allow mapping of user addresses (within the thread)
+	 * for DMA if necessary.
+	 */
+	if (addr < TASK_SIZE)
+		mm = current->mm;
+	else
+		mm = &init_mm;
+
+	pa = 0;
+	if (get_pteptr(mm, addr, &pte))
+		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+
+	return pa;
+}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 998e5db8cc0..25f3b0a11ca 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,6 +72,7 @@ config MIPS_COBALT
 	select IRQ_CPU
 	select IRQ_GT641XX
 	select PCI_GT64XXX_PCI0
+	select PCI
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -593,7 +594,7 @@ config WR_PPMC
 	  board, which is based on GT64120 bridge chip.
 
 config CAVIUM_OCTEON_SIMULATOR
-	bool "Support for the Cavium Networks Octeon Simulator"
+	bool "Cavium Networks Octeon Simulator"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -607,7 +608,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	  hardware.
 
 config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Support for the Cavium Networks Octeon reference board"
+	bool "Cavium Networks Octeon reference board"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -1411,13 +1412,12 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on EXPERIMENTAL && CPU_R8000
+	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
-	  only on the R8000 processor.  Not that at the time of this writing
-	  this option is still high experimental; there are also issues with
-	  compatibility of user applications.
+	  only on R8000 and cnMIPS processors.  Note that you will need a
+	  suitable Linux distribution to support this.
 
 config PAGE_SIZE_16KB
 	bool "16kB"
@@ -1428,6 +1428,15 @@ config PAGE_SIZE_16KB
 	  all non-R3000 family processors.  Note that you will need a suitable
 	  Linux distribution to support this.
 
+config PAGE_SIZE_32KB
+	bool "32kB"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Using 32kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on cnMIPS cores.  Note that you will need a suitable Linux
+	  distribution to support this.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
 	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
@@ -1958,10 +1967,6 @@ config SECCOMP
 
 endmenu
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 8d544c7c9fe..c4cae9e6b80 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,8 +14,6 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y := -ffunction-sections
-
 #
 # Select the object file format to substitute into the linker script.
 #
@@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
 vmlinux-32		= vmlinux
@@ -472,12 +473,12 @@ endif
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
 ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
-      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
   endif
 endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index f58d4ffb894..33fbae79af5 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -44,7 +44,7 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
 }
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 70fd92c3165..96110f217dc 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 1c19af8daa6..d3a0c8154be 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -177,7 +177,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
@@ -199,6 +199,8 @@ static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
 	write_unlock(&octeon_irq_ciu0_rwlock);
+
+	return 0;
 }
 #endif
 
@@ -292,7 +294,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
@@ -315,6 +317,8 @@ static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
 	write_unlock(&octeon_irq_ciu1_rwlock);
+
+	return 0;
 }
 #endif
 
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 1b332e15ab5..eb7f01cfd1a 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -793,6 +793,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 #define smp_mb__before_atomic_inc()	smp_llsc_mb()
 #define smp_mb__after_atomic_inc()	smp_llsc_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* _ASM_ATOMIC_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index bac4a960b24..b1e9e97a9c7 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
 	int num;
 
 	if (BITS_PER_LONG == 32 &&
-	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
 {
 	int r;
 
-	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
 		return 32 - x;
diff --git a/arch/mips/include/asm/bitsperlong.h b/arch/mips/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..3e4c10a8e78
--- /dev/null
+++ b/arch/mips/include/asm/bitsperlong.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MIPS_BITSPERLONG_H
+#define __ASM_MIPS_BITSPERLONG_H
+
+#define __BITS_PER_LONG _MIPS_SZLONG
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_MIPS_BITSPERLONG_H */
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index 290485ac540..f2f7c6c264d 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -40,7 +40,7 @@ static inline
 __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	return __csum_partial_copy_user((__force void *)src, dst,
 					len, sum, err_ptr);
 }
@@ -53,7 +53,7 @@ static inline
 __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, dst, len))
 		return __csum_partial_copy_user(src, (__force void *)dst,
 						len, sum, err_ptr);
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 6c5b40905dd..f58aed354bf 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,7 +3,6 @@
 /*
  * Architecture specific compatibility types
  */
-#include <linux/seccomp.h>
 #include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index a0d14f85b78..c0047f86133 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -147,6 +147,15 @@
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz	cpu_has_mips_r
+# endif
+
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index 744cd8fb107..126044308de 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -39,8 +39,8 @@ struct cache_desc {
 #define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
 
 struct cpuinfo_mips {
-	unsigned long		udelay_val;
-	unsigned long		asid_cache;
+	unsigned int		udelay_val;
+	unsigned int		asid_cache;
 
 	/*
 	 * Capability and feature descriptor structure for MIPS CPU
diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h
index b0bccd2c4ed..a07e51b2be1 100644
--- a/arch/mips/include/asm/delay.h
+++ b/arch/mips/include/asm/delay.h
@@ -11,94 +11,12 @@
 #ifndef _ASM_DELAY_H
 #define _ASM_DELAY_H
 
-#include <linux/param.h>
-#include <linux/smp.h>
+extern void __delay(unsigned int loops);
+extern void __ndelay(unsigned int ns);
+extern void __udelay(unsigned int us);
 
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (sizeof(long) == 4)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	subu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && !DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, %2					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
-	unsigned long hi, lo;
-
-	/*
-	 * The rates of 128 is rounded wrongly by the catchall case
-	 * for 64-bit.  Excessive precission?  Probably ...
-	 */
-#if defined(CONFIG_64BIT) && (HZ == 128)
-	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
-	usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
-	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
-	                           0x80000000ULL) >> 32);
-#endif
-
-	if (sizeof(long) == 4)
-		__asm__("multu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && !R4000_WAR)
-		__asm__("dmultu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && R4000_WAR)
-		__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
-		: "=r" (usecs), "=h" (hi), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-
-	__delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
+#define ndelay(ns) __udelay(ns)
+#define udelay(us) __udelay(us)
 
 /* make sure "usecs *= ..." in udelay do not overflow. */
 #if HZ >= 1000
diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
index d1d699105c1..dc5ea573644 100644
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -6,105 +6,63 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
 
-#include <linux/types.h>
+#include <asm-generic/div64.h>
 
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
 
-#include <asm/compiler.h>
+#include <linux/types.h>
 
 /*
  * No traps on overflows for any of these...
  */
 
-#define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot32, __mod32; \
-	unsigned long __cf, __tmp, __tmp2, __i; \
-	\
-	__asm__(".set	push\n\t" \
-		".set	noat\n\t" \
-		".set	noreorder\n\t" \
-		"move	%2, $0\n\t" \
-		"move	%3, $0\n\t" \
-		"b	1f\n\t" \
-		" li	%4, 0x21\n" \
-		"0:\n\t" \
-		"sll	$1, %0, 0x1\n\t" \
-		"srl	%3, %0, 0x1f\n\t" \
-		"or	%0, $1, %5\n\t" \
-		"sll	%1, %1, 0x1\n\t" \
-		"sll	%2, %2, 0x1\n" \
-		"1:\n\t" \
-		"bnez	%3, 2f\n\t" \
-		" sltu	%5, %0, %z6\n\t" \
-		"bnez	%5, 3f\n" \
-		"2:\n\t" \
-		" addiu	%4, %4, -1\n\t" \
-		"subu	%0, %0, %z6\n\t" \
-		"addiu	%2, %2, 1\n" \
-		"3:\n\t" \
-		"bnez	%4, 0b\n\t" \
-		" srl	%5, %1, 0x1f\n\t" \
-		".set	pop" \
-		: "=&r" (__mod32), "=&r" (__tmp), \
-		  "=&r" (__quot32), "=&r" (__cf), \
-		  "=&r" (__i), "=&r" (__tmp2) \
-		: "Jr" (base), "0" (high), "1" (low)); \
-	\
-	(res) = __quot32; \
-	__mod32; })
-
-#define do_div(n, base) ({ \
-	unsigned long long __quot; \
-	unsigned long __mod; \
-	unsigned long long __div; \
-	unsigned long __upper, __low, __high, __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__high = __div >> 32; \
-	__low = __div; \
-	__upper = __high; \
-	\
-	if (__high) \
-		__asm__("divu	$0, %z2, %z3" \
-			: "=h" (__upper), "=l" (__high) \
-			: "Jr" (__high), "Jr" (__base) \
-			: GCC_REG_ACCUM); \
-	\
-	__mod = do_div64_32(__low, __upper, __low, __base); \
-	\
-	__quot = __high; \
-	__quot = __quot << 32 | __low; \
-	(n) = __quot; \
-	__mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
-	unsigned long __quot; \
-	unsigned int __mod; \
-	unsigned long __div; \
-	unsigned int __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__mod = __div % __base; \
-	__quot = __div / __base; \
-	\
-	(n) = __quot; \
-	__mod; })
+#define __div64_32(n, base)						\
+({									\
+	unsigned long __cf, __tmp, __tmp2, __i;				\
+	unsigned long __quot32, __mod32;				\
+	unsigned long __high, __low;					\
+	unsigned long long __n;						\
+									\
+	__high = *__n >> 32;						\
+	__low = __n;							\
+	__asm__(							\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	noreorder				\n"	\
+	"	move	%2, $0					\n"	\
+	"	move	%3, $0					\n"	\
+	"	b	1f					\n"	\
+	"	 li	%4, 0x21				\n"	\
+	"0:							\n"	\
+	"	sll	$1, %0, 0x1				\n"	\
+	"	srl	%3, %0, 0x1f				\n"	\
+	"	or	%0, $1, %5				\n"	\
+	"	sll	%1, %1, 0x1				\n"	\
+	"	sll	%2, %2, 0x1				\n"	\
+	"1:							\n"	\
+	"	bnez	%3, 2f					\n"	\
+	"	 sltu	%5, %0, %z6				\n"	\
+	"	bnez	%5, 3f					\n"	\
+	"2:							\n"	\
+	"	 addiu	%4, %4, -1				\n"	\
+	"	subu	%0, %0, %z6				\n"	\
+	"	addiu	%2, %2, 1				\n"	\
+	"3:							\n"	\
+	"	bnez	%4, 0b\n\t"					\
+	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	.set	pop"						\
+	: "=&r" (__mod32), "=&r" (__tmp),				\
+	  "=&r" (__quot32), "=&r" (__cf),				\
+	  "=&r" (__i), "=&r" (__tmp2)					\
+	: "Jr" (base), "0" (__high), "1" (__low));			\
+									\
+	(__n) = __quot32;						\
+	__mod32;							\
+})
 
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
 
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index c64afb40cd0..d16afddb09a 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	enum dma_data_direction direction);
 extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int nhwentries, enum dma_data_direction direction);
 extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 9cc8522a394..0f5caa1307f 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	return __virt_to_fix(vaddr);
 }
 
+#define kmap_get_fixmap_pte(vaddr)					\
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
 /*
  * Called from pgtable_init()
  */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a12d971db4f..0eaf77ffbc4 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,8 +138,9 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-      defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 4374ab2adc7..25adfb02923 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -30,8 +30,6 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h
index 85067e248a8..916163401b2 100644
--- a/arch/mips/include/asm/ioctl.h
+++ b/arch/mips/include/asm/ioctl.h
@@ -60,12 +60,16 @@
 	 ((nr)   << _IOC_NRSHIFT) | \
 	 ((size) << _IOC_SIZESHIFT))
 
+#ifdef __KERNEL__
 /* provoke compile error for invalid uses of size argument */
 extern unsigned int __invalid_size_argument_for_IOC;
 #define _IOC_TYPECHECK(t) \
 	((sizeof(t) == sizeof(t[1]) && \
 	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
 	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t)	(sizeof(t))
+#endif
 
 /* used to create numbers */
 #define _IO(type, nr)		_IOC(_IOC_NONE, (type), (nr), 0)
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 3214ade02d1..4f1eed107b0 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -49,7 +49,7 @@ static inline void smtc_im_ack_irq(unsigned int irq)
 #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
 #include <linux/cpumask.h>
 
-extern void plat_set_irq_affinity(unsigned int irq,
+extern int plat_set_irq_affinity(unsigned int irq,
 				  const struct cpumask *affinity);
 extern void smtc_forward_irq(unsigned int irq);
 
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 62f91f50b5b..854e95f1b07 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -715,7 +715,7 @@ enum soc_au1500_ints {
 #ifdef CONFIG_SOC_AU1100
 enum soc_au1100_ints {
 	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
 	AU1100_UART1_INT,
 	AU1100_SD_INT,
 	AU1100_UART3_INT,
@@ -902,8 +902,8 @@ enum soc_au1200_ints {
 	AU1000_RTC_MATCH0_INT,
 	AU1000_RTC_MATCH1_INT,
 	AU1000_RTC_MATCH2_INT,
-
-	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_203,
+	AU1200_NAND_INT,
 	AU1200_GPIO_204,
 	AU1200_GPIO_205,
 	AU1200_GPIO_206,
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 60638b8969b..5656c72de6d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -46,20 +46,6 @@
 #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
 #endif
 
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
-	spinlock_t		lock;	/* Used to block on state transitions */
-	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
-	unsigned		stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
 typedef struct {
 	u32			tx_dev_id, rx_dev_id, target_dev_id;
 	u32			tx_chan, rx_chan;
@@ -72,9 +58,6 @@ typedef struct {
 #endif
 	int			irq;
 	u32			regbase;
-#ifdef CONFIG_PM
-	pm_state		pm;
-#endif
 } _auide_hwif;
 
 /******************************************************************************/
diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
new file mode 100644
index 00000000000..550a10dc9db
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 526f327475c..32ef8bec5c8 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -184,12 +184,19 @@
 #else
 
 #define PM_4K		0x00000000
+#define PM_8K		0x00002000
 #define PM_16K		0x00006000
+#define PM_32K		0x0000e000
 #define PM_64K		0x0001e000
+#define PM_128K		0x0003e000
 #define PM_256K		0x0007e000
+#define PM_512K		0x000fe000
 #define PM_1M		0x001fe000
+#define PM_2M		0x003fe000
 #define PM_4M		0x007fe000
+#define PM_8M		0x00ffe000
 #define PM_16M		0x01ffe000
+#define PM_32M		0x03ffe000
 #define PM_64M		0x07ffe000
 #define PM_256M		0x1fffe000
 #define PM_1G		0x7fffe000
@@ -201,8 +208,12 @@
  */
 #ifdef CONFIG_PAGE_SIZE_4KB
 #define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK	PM_8K
 #elif defined(CONFIG_PAGE_SIZE_16KB)
 #define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK	PM_32K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
 #define PM_DEFAULT_MASK	PM_64K
 #else
@@ -717,8 +728,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source "\n\t"			\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	else								\
@@ -726,8 +737,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	local_irq_restore(__flags);					\
@@ -1484,14 +1495,15 @@ static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res |= set;						\
-	write_c0_##name(res);					\
+	new = res | set;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1502,14 +1514,15 @@ static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~clear;						\
-	write_c0_##name(res);					\
+	new = res & ~clear;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1517,9 +1530,10 @@ clear_c0_##name(unsigned int clear)				\
 }								\
 								\
 static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int new)		\
+change_c0_##name(unsigned int change, unsigned int newbits)	\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
@@ -1527,9 +1541,9 @@ change_c0_##name(unsigned int change, unsigned int new)		\
 								\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~change;						\
-	res |= (new & change);					\
-	write_c0_##name(res);					\
+	new = res & ~change;					\
+	new |= (newbits & change);				\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index fe7a88ea066..72c80d2034c 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -23,6 +23,9 @@
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define PAGE_SHIFT	14
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT	15
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif
@@ -186,6 +189,6 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 #define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_PAGE_H */
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 943515f0ef8..4ed9d1bba2b 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -83,6 +83,12 @@
 #define PMD_ORDER		0
 #define PTE_ORDER		0
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PGD_ORDER		0
 #define PUD_ORDER		aieeee_attempt_to_allocate_pud
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
index bee5153aca4..c783f364938 100644
--- a/arch/mips/include/asm/signal.h
+++ b/arch/mips/include/asm/signal.h
@@ -109,7 +109,7 @@ typedef unsigned long old_sigset_t;		/* at least 32 bits */
 #define SIG_UNBLOCK	2	/* for unblocking signals */
 #define SIG_SETMASK	3	/* for setting the signal mask */
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 struct sigaction {
 	unsigned int	sa_flags;
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index fec9bdd3491..3a56d90abfa 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -359,11 +359,11 @@
 	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
 #define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
 
-#define NMI_OFFSET(nasid, slice)					\
+#define SN_NMI_OFFSET(nasid, slice)					\
 	(KLD_NMI(nasid)->offset +					\
 	 KLD_NMI(nasid)->stride * (slice))
 #define NMI_ADDR(nasid, slice)						\
-	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+	TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
 #define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
 
 #define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
index 6b7b0b5f372..1af49897d4e 100644
--- a/arch/mips/include/asm/sn/nmi.h
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -3,13 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
  * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
  */
 #ifndef __ASM_SN_NMI_H
 #define __ASM_SN_NMI_H
 
-#ident "$Revision: 1.5 $"
-
 #include <asm/sn/addrs.h>
 
 /*
diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
deleted file mode 100644
index 2562f8f9be0..00000000000
--- a/arch/mips/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SUSPEND_H
-#define __ASM_SUSPEND_H
-
-/* Somewhen...  Maybe :-)  */
-
-#endif /* __ASM_SUSPEND_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 676aa2ae191..143a48136a4 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define THREAD_SIZE_ORDER (0)
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define THREAD_SIZE_ORDER (0)
 #endif
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 38a30d2ee95..df6a430de5e 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void);
 
 static inline int mips_clockevent_init(void)
 {
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern int smtc_clockevent_init(void);
+
+	return smtc_clockevent_init();
+#elif defined(CONFIG_CEVT_R4K)
 	return r4k_clockevent_init();
 #else
 	return -ENXIO;
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
index 7956e69a3bd..544a2854598 100644
--- a/arch/mips/include/asm/types.h
+++ b/arch/mips/include/asm/types.h
@@ -31,9 +31,6 @@ typedef unsigned short umode_t;
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
-#define BITS_PER_LONG _MIPS_SZLONG
-
 #ifndef __ASSEMBLY__
 
 #if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 09ff5bb1744..c2d53c18fd3 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -105,10 +105,20 @@
 #define __access_mask get_fs().seg
 
 #define __access_ok(addr, size, mask)					\
-	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+({									\
+	unsigned long __addr = (unsigned long) (addr);			\
+	unsigned long __size = size;					\
+	unsigned long __mask = mask;					\
+	unsigned long __ok;						\
+									\
+	__chk_user_ptr(addr);						\
+	__ok = (signed long)(__mask & (__addr | (__addr + __size) |	\
+		__ua_size(__size)));					\
+	__ok == 0;							\
+})
 
 #define access_ok(type, addr, size)					\
-	likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+	likely(__access_ok((addr), (size), __access_mask))
 
 /*
  * put_user: - Write a simple value into user space.
@@ -225,6 +235,7 @@ do {									\
 ({									\
 	int __gu_err;							\
 									\
+	__chk_user_ptr(ptr);						\
 	__get_user_common((x), size, ptr);				\
 	__gu_err;							\
 })
@@ -234,6 +245,7 @@ do {									\
 	int __gu_err = -EFAULT;						\
 	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
 		__get_user_common((x), size, __gu_ptr);			\
 									\
@@ -305,6 +317,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val;					\
 	int __pu_err = 0;						\
 									\
+	__chk_user_ptr(ptr);						\
 	__pu_val = (x);							\
 	switch (size) {							\
 	case 1: __put_user_asm("sb", ptr); break;			\
@@ -322,6 +335,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	int __pu_err = -EFAULT;						\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
 		switch (size) {						\
 		case 1: __put_user_asm("sb", __pu_addr); break;		\
@@ -696,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
 	__cu_len;							\
 })
@@ -752,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
 		                                 __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -831,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
 	                                   __cu_len);			\
 	__cu_len;							\
@@ -862,17 +877,31 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
-#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	might_fault();							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
 
 #define copy_in_user(to, from, n)					\
 ({									\
@@ -880,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
-	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -907,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, $0\n\t"
@@ -926,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 	void __user * __cl_addr = (addr);				\
 	unsigned long __cl_size = (n);					\
 	if (__cl_size && access_ok(VERIFY_WRITE,			\
-		((unsigned long)(__cl_addr)), __cl_size))		\
+					__cl_addr, __cl_size))		\
 		__cl_size = __clear_user(__cl_addr, __cl_size);		\
 	__cl_size;							\
 })
@@ -956,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -993,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1012,7 +1042,7 @@ static inline long __strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_nocheck_asm)
@@ -1042,7 +1072,7 @@ static inline long strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_asm)
@@ -1059,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1090,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
index 6d45e24db5b..df6f5bc6057 100644
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 }
 
 
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 87deb8f6c45..3f43c2e3aa5 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -155,7 +155,7 @@ static void gic_unmask_irq(unsigned int irq)
 
 static DEFINE_SPINLOCK(gic_lock);
 
-static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 {
 	cpumask_t	tmp = CPU_MASK_NONE;
 	unsigned long	flags;
@@ -166,7 +166,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 
 	cpumask_and(&tmp, cpumask, cpu_online_mask);
 	if (cpus_empty(tmp))
-		return;
+		return -1;
 
 	/* Assumption : cpumask refers to a single CPU */
 	spin_lock_irqsave(&gic_lock, flags);
@@ -190,6 +190,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	cpumask_copy(irq_desc[irq].affinity, cpumask);
 	spin_unlock_irqrestore(&gic_lock, flags);
 
+	return 0;
 }
 #endif
 
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 1f60e27523d..3e9100dcc12 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -68,8 +68,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 26760cad8b6..e0a4ac18fa0 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, fmt, __cpu_name[n],
 	                           (version >> 4) & 0x0f, version & 0x0f,
 	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
-	seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
+	seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
 	              cpu_data[n].udelay_val / (500000/HZ),
 	              (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index c2c16ef9218..93cc672f452 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -405,8 +405,8 @@ EXPORT(sysn32_call_table)
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime		/* 5285 */
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime	/* 5285 */
+	PTR	compat_sys_timerfd_settime
 	PTR	sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 002fac27021..a5598b2339d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -525,8 +525,8 @@ sys_call_table:
 	PTR	sys_eventfd
 	PTR	sys32_fallocate			/* 4320 */
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime
+	PTR	compat_sys_timerfd_settime
 	PTR	compat_sys_signalfd4
 	PTR	sys_eventfd2			/* 4325 */
 	PTR	sys_epoll_create1
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index bf4c4a979ab..67bd626942a 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -482,19 +482,19 @@ fault:
 		return;
 
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGSEGV, current, 1);
+	force_sig(SIGSEGV, current);
 
 	return;
 
 sigbus:
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGBUS, current, 1);
+	force_sig(SIGBUS, current);
 
 	return;
 
 sigill:
 	die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
-	send_sig(SIGILL, current, 1);
+	force_sig(SIGILL, current);
 }
 
 asmlinkage void do_ade(struct pt_regs *regs)
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index c13c7ad2cda..2adead5a8a3 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,8 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
-	   strncpy_user.o strnlen_user.o uncached.o
+lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
 
 obj-y			+= iomap.o
 obj-$(CONFIG_PCI)	+= iomap-pci.o
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
new file mode 100644
index 00000000000..f69c6b569eb
--- /dev/null
+++ b/arch/mips/lib/delay.c
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+inline void __delay(unsigned int loops)
+{
+	__asm__ __volatile__ (
+	"	.set	noreorder				\n"
+	"	.align	3					\n"
+	"1:	bnez	%0, 1b					\n"
+	"	subu	%0, 1					\n"
+	"	.set	reorder					\n"
+	: "=r" (loops)
+	: "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+	unsigned int lpj = current_cpu_data.udelay_val;
+
+	__delay((us * 0x000010c7 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+	unsigned int lpj = current_cpu_data.udelay_val;
+
+	__delay((us * 0x00000005 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 779821cd54a..3f69725556a 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask)
 	case PM_16K:	return "16kb";
 	case PM_64K:	return "64kb";
 	case PM_256K:	return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case PM_8K:	return "8kb";
+	case PM_32K:	return "32kb";
+	case PM_128K:	return "128kb";
+	case PM_512K:	return "512kb";
+	case PM_2M:	return "2Mb";
+	case PM_8M:	return "8Mb";
+	case PM_32M:	return "32Mb";
+#endif
 #ifndef CONFIG_CPU_VR41XX
 	case PM_1M:	return "1Mb";
 	case PM_4M:	return "4Mb";
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 58d9075e86f..171951d2305 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void)
 
 	printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
 	       icache_size >> 10,
-	       cpu_has_vtag_icache ? "VIVT" : "VIPT",
+	       c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
 	       way_string[c->icache.ways], c->icache.linesz);
 
 	printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index bed56f1ac83..4fdb7f5216b 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long addr;
 
 		addr = (unsigned long) page_address(page) + offset;
-		dma_cache_wback_inv(addr, size);
+		__dma_sync(addr, size, direction);
 	}
 
 	return plat_map_dma_mem_page(dev, page) + offset;
@@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
-		unsigned long addr;
-
-		addr = dma_addr_to_virt(dma_address);
-		dma_cache_wback_inv(addr, size);
-	}
-
-	plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	enum dma_data_direction direction)
 {
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 4481656d106..2b1309b2580 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,7 +1,12 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
 void *__kmap(struct page *page)
 {
 	void *addr;
@@ -14,6 +19,7 @@ void *__kmap(struct page *page)
 
 	return addr;
 }
+EXPORT_SYMBOL(__kmap);
 
 void __kunmap(struct page *page)
 {
@@ -22,6 +28,7 @@ void __kunmap(struct page *page)
 		return;
 	kunmap_high(page);
 }
+EXPORT_SYMBOL(__kunmap);
 
 /*
  * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
@@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
 	local_flush_tlb_one((unsigned long)vaddr);
 
 	return (void*) vaddr;
 }
+EXPORT_SYMBOL(__kmap_atomic);
 
 void __kunmap_atomic(void *kvaddr, enum km_type type)
 {
@@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
+EXPORT_SYMBOL(__kunmap_atomic);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
@@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 	debug_kmap_atomic(type);
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
 	flush_tlb_one(vaddr);
 
 	return (void*) vaddr;
@@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+	unsigned long kmap_vstart;
+
+	/* cache the first kmap pte */
+	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index d9348946a19..c5511294a9e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void)
 	return 1UL << order;
 }
 
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
 #ifdef CONFIG_MIPS_MT_SMTC
 static pte_t *kmap_coherent_pte;
 static void __init kmap_coherent_init(void)
@@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma,
 	}
 }
 
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
-	unsigned long kmap_vstart;
-
-	/* cache the first kmap pte */
-	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
-	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
-	kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index e3abfb2d7e8..de69bfbf506 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size;
 
 #include <asm/r4kcache.h>
 
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
 
 /*
  * Writeback and invalidate the primary cache dcache before DMA.
@@ -121,7 +121,7 @@ static void rm7k_sc_disable(void)
 	clear_c0_config(RM7K_CONF_SE);
 }
 
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
 	.bc_enable = rm7k_sc_enable,
 	.bc_disable = rm7k_sc_disable,
 	.bc_wback_inv = rm7k_sc_wback_inv,
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index f0cf46adb97..1c0048a6f5c 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, mm) != 0) {
-		unsigned long flags;
-		int size;
+		unsigned long size, flags;
 
 #ifdef DEBUG_TLB
 		printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
@@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 #ifdef DEBUG_TLB
 	printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 9619f66e531..892be426787 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, mm) != 0) {
-		unsigned long flags;
-		int size;
+		unsigned long size, flags;
 
 		ENTER_CRITICAL(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
@@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 	ENTER_CRITICAL(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c
index 4f01a3be215..4ec95cc2df2 100644
--- a/arch/mips/mm/tlb-r8k.c
+++ b/arch/mips/mm/tlb-r8k.c
@@ -111,8 +111,7 @@ out_restore:
 /* Usable for KV1 addresses only! */
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ba31888fef..499ffe5475d 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -114,7 +114,7 @@ struct plat_smp_ops msmtc_smp_ops = {
  */
 
 
-void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 {
 	cpumask_t tmask;
 	int cpu = 0;
@@ -156,5 +156,7 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 
 	/* Do any generic SMTC IRQ affinity setup */
 	smtc_set_irq_affinity(irq, tmask);
+
+	return 0;
 }
 #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index 90261b83db0..c139988bb85 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA
 
 endchoice
 
-menu "Options for PMC-Sierra MSP chipsets"
-	depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
-	bool "Root filesystem embedded in kernel image"
-	select MTD
-	select MTD_BLOCK
-	select MTD_PMC_MSP_RAMROOT
-	select MTD_RAM
-
-endmenu
-
 config HYPERTRANSPORT
 	bool "Hypertransport Support for PMC-Sierra Yosemite"
 	depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
index e5bd5481d8d..c317a3623ce 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
@@ -40,12 +40,6 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	char		*str;
 	unsigned int	memsize;
 	unsigned int	heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	void		*ramroot_start;
-	unsigned long	ramroot_size;
-#endif
 	int i;
 
 	str = prom_getenv(memsz_env);
@@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	i++;			/* 3 */
 	mdesc[i].type = BOOT_MEM_RESERVED;
 	mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	if (get_ramroot(&ramroot_start, &ramroot_size)) {
-		/*
-		 * Rootfs in RAM -- follows kernel
-		 * Combine rootfs image with kernel block so a
-		 * page (4k) isn't wasted between memory blocks
-		 */
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)ramroot_start + ramroot_size)) - mdesc[i].base;
-	} else
-#endif
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)_end)) - mdesc[i].base;
+	mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
 
 	/* Remainder of RAM -- under memsize */
 	i++;			/* 5 */
@@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 
 	return &mdesc[0];
 }
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
-	extern char _end[];
-
-	/* Check for start following the end of the kernel */
-	void *check_start = (void *)_end;
-
-	/* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
-	if (*(__u32 *)check_start == CRAMFS_MAGIC) {
-		/* Get CRAMFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct cramfs_super *)
-				   check_start)->size);
-
-		return true;
-	}
-#endif
-#ifdef CONFIG_SQUASHFS
-	if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
-		/* Get SQUASHFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct squashfs_super_block *)
-				   check_start)->bytes_used);
-
-		return true;
-	}
-#endif
-
-	return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index c93675615f5..a54e85b3cf2 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -21,7 +21,6 @@
 
 #if defined(CONFIG_PMC_MSP7120_GW)
 #include <msp_regops.h>
-#include <msp_gpio.h>
 #define MSP_BOARD_RESET_GPIO	9
 #endif
 
@@ -88,11 +87,8 @@ void msp7120_reset(void)
 	 * as GPIO char driver may not be enabled and it would look up
 	 * data inRAM!
 	 */
-	set_value_reg32(GPIO_CFG3_REG,
-			basic_mode_mask(MSP_BOARD_RESET_GPIO),
-			basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
-	set_reg32(GPIO_DATA3_REG,
-			basic_data_mask(MSP_BOARD_RESET_GPIO));
+	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+	set_reg32(GPIO_DATA3_REG, 8);
 
 	/*
 	 * In case GPIO9 doesn't reset the board (jumper configurable!)
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c
index 7cfeda5a651..cca64e15f57 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_time.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c
@@ -81,10 +81,7 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = cpu_rate/2;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
 {
-#ifdef CONFIG_IRQ_MSP_CIC
-	/* we are using the vpe0 counter for timer interrupts */
-	setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+	return MSP_INT_VPE0_TIMER;
 }
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 4ad5c3393fd..45b6694c207 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 
 	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
 		/* Wait until interrupt goes away */
-		disable_irq(SGI_PANEL_IRQ);
+		disable_irq_nosync(SGI_PANEL_IRQ);
 		init_timer(&debounce_timer);
 		debounce_timer.function = debounce;
 		debounce_timer.expires = jiffies + 5;
diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c
index a278e918a01..afc1cadbba3 100644
--- a/arch/mips/sgi-ip32/ip32-berr.c
+++ b/arch/mips/sgi-ip32/ip32-berr.c
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;
 
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 83a0b3c359d..5c2bf111ca6 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -112,13 +112,13 @@ static void inline flush_mace_bus(void)
 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
 
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
 	.handler = crime_memerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME memory error",
 };
 
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
 	.handler = crime_cpuerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME CPU error",
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index b6cab089561..9b95d80ebc6 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void)
 
 static void ip32_machine_power_off(void)
 {
-	volatile unsigned char reg_a, xctrl_a, xctrl_b;
+	unsigned char reg_a, xctrl_a, xctrl_b;
 
 	disable_irq(MACEISA_RTC_IRQ);
 	reg_a = CMOS_READ(RTC_REG_A);
@@ -91,9 +91,10 @@ static void blink_timeout(unsigned long data)
 
 static void debounce(unsigned long data)
 {
-	volatile unsigned char reg_a, reg_c, xctrl_a;
+	unsigned char reg_a, reg_c, xctrl_a;
 
 	reg_c = CMOS_READ(RTC_INTR_FLAGS);
+	reg_a = CMOS_READ(RTC_REG_A);
 	CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
 	wbflush();
 	xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
@@ -137,7 +138,7 @@ static inline void ip32_power_button(void)
 
 static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
 {
-	volatile unsigned char reg_c;
+	unsigned char reg_c;
 
 	reg_c = CMOS_READ(RTC_INTR_FLAGS);
 	if (!(reg_c & RTC_IRQF)) {
@@ -145,7 +146,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
 			"%s: RTC IRQ without RTC_IRQF\n", __func__);
 	}
 	/* Wait until interrupt goes away */
-	disable_irq(MACEISA_RTC_IRQ);
+	disable_irq_nosync(MACEISA_RTC_IRQ);
 	init_timer(&debounce_timer);
 	debounce_timer.function = debounce;
 	debounce_timer.expires = jiffies + 50;
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 352352b3cb2..690de06bde9 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -50,7 +50,7 @@ static void enable_bcm1480_irq(unsigned int irq);
 static void disable_bcm1480_irq(unsigned int irq);
 static void ack_bcm1480_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
 #endif
 
 #ifdef CONFIG_PCI
@@ -109,17 +109,16 @@ void bcm1480_unmask_irq(int cpu, int irq)
 }
 
 #ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	unsigned int irq_dirty;
 
 	if (cpumask_weight(mask) != 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
+		return -1;
 	}
 	i = cpumask_first(mask);
 
@@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&bcm1480_imr_lock);
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = bcm1480_irq_owner[irq];
@@ -153,8 +151,9 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
 		}
 	}
-	spin_unlock(&bcm1480_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+
+	return 0;
 }
 #endif
 
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index 3de30f79db3..eb5396cf81b 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -288,13 +288,7 @@ void __init prom_init(void)
 	 */
 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
 	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
-		if (argc < 0) {
-			/*
-			 * It's OK for direct boot to not provide a
-			 *  command line
-			 */
-			strcpy(arcs_cmdline, "root=/dev/ram0 ");
-		} else {
+		if (argc >= 0) {
 			/* The loader should have set the command line */
 			/* too early for panic to do any good */
 			printk("LINUX_CMDLINE not defined in cfe.");
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index c08ff582da6..409dec79886 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -50,7 +50,7 @@ static void enable_sb1250_irq(unsigned int irq);
 static void disable_sb1250_irq(unsigned int irq);
 static void ack_sb1250_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
 #endif
 
 #ifdef CONFIG_SIBYTE_HAS_LDT
@@ -103,26 +103,24 @@ void sb1250_unmask_irq(int cpu, int irq)
 }
 
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 
 	i = cpumask_first(mask);
 
 	if (cpumask_weight(mask) > 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
+		return -1;
 	}
 
 	/* Convert logical CPU to physical CPU */
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&sb1250_imr_lock);
+	spin_lock_irqsave(&sb1250_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
@@ -144,8 +142,9 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	}
-	spin_unlock(&sb1250_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+
+	return 0;
 }
 #endif
 
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 914e93c6263..1093549df1a 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -88,7 +88,7 @@ void __init tx4927_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index f0844f891f0..3925219b897 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -93,7 +93,7 @@ void __init tx4938_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 7a25b573e9b..c2bf150c883 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -114,7 +114,7 @@ void __init tx4939_setup(void)
 	int i;
 	__u32 divmode;
 	__u64 pcfg;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 
 	txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
 			  TX4939_REG_SIZE);
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 011e1e332f4..4199c6fd4d1 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void)
 }
 
 struct txx9_board_vec rbtx4939_vec __initdata = {
-	.system = "Tothiba RBTX4939",
+	.system = "Toshiba RBTX4939",
 	.prom_init = rbtx4939_prom_init,
 	.mem_setup = rbtx4939_setup,
 	.irq_setup = rbtx4939_irq_setup,
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 355926730e8..89faacad5d1 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
+	select HAVE_ARCH_TRACEHOOK
 
 config AM33
 	def_bool y
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
index bc064825f9b..5bf5be9566d 100644
--- a/arch/mn10300/include/asm/atomic.h
+++ b/arch/mn10300/include/asm/atomic.h
@@ -151,7 +151,7 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_ATOMIC_H */
diff --git a/arch/mn10300/include/asm/bitsperlong.h b/arch/mn10300/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/mn10300/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h
index bf09f8bb392..49105462e6f 100644
--- a/arch/mn10300/include/asm/elf.h
+++ b/arch/mn10300/include/asm/elf.h
@@ -34,7 +34,7 @@
  */
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+#define ELF_NGREG ((sizeof(struct pt_regs) / sizeof(elf_greg_t)) - 1)
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 #define ELF_NFPREG 32
@@ -76,6 +76,7 @@ do {									\
 } while (0)
 
 #define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	4096
 
 /*
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
index b7986b65add..d04fac1da5a 100644
--- a/arch/mn10300/include/asm/mman.h
+++ b/arch/mn10300/include/asm/mman.h
@@ -12,7 +12,7 @@
 #ifndef _ASM_MMAN_H
 #define _ASM_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
index 73239271873..f7d4b0d285e 100644
--- a/arch/mn10300/include/asm/processor.h
+++ b/arch/mn10300/include/asm/processor.h
@@ -143,13 +143,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 
 unsigned long get_wchan(struct task_struct *p);
 
-#define task_pt_regs(task)						\
-({									\
-       struct pt_regs *__regs__;					\
-       __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
-       __regs__ - 1;							\
-})
-
+#define task_pt_regs(task) ((task)->thread.uregs)
 #define KSTK_EIP(task) (task_pt_regs(task)->pc)
 #define KSTK_ESP(task) (task_pt_regs(task)->sp)
 
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 7b06cc623d8..1b0ba5e182b 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -77,8 +77,6 @@ struct pt_regs {
 };
 #endif
 
-extern struct pt_regs *__frame; /* current frame pointer */
-
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
@@ -90,14 +88,23 @@ extern struct pt_regs *__frame; /* current frame pointer */
 
 #if defined(__KERNEL__)
 
+extern struct pt_regs *__frame;		/* current frame pointer */
+
 #if !defined(__ASSEMBLY__)
+struct task_struct;
+
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
+#define user_stack_pointer(regs)	((regs)->sp)
 extern void show_regs(struct pt_regs *);
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
 #endif  /*  !__ASSEMBLY  */
 
 #define profile_pc(regs) ((regs)->pc)
 
 #endif  /*  __KERNEL__  */
-
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
index 08356c83228..c229d1e3f99 100644
--- a/arch/mn10300/include/asm/setup.h
+++ b/arch/mn10300/include/asm/setup.h
@@ -11,7 +11,8 @@
 #ifndef _ASM_SETUP_H
 #define _ASM_SETUP_H
 
+#ifdef __KERNEL__
 extern void __init unit_setup(void);
 extern void __init unit_init_IRQ(void);
-
+#endif
 #endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
index e98817cec5f..7e891fce237 100644
--- a/arch/mn10300/include/asm/signal.h
+++ b/arch/mn10300/include/asm/signal.h
@@ -115,7 +115,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 3dc3e462f92..7408a27199f 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -76,7 +76,7 @@ ENTRY(system_call)
 	cmp	nr_syscalls,d0
 	bcc	syscall_badsys
 	btst	_TIF_SYSCALL_TRACE,(TI_flags,a2)
-	bne	syscall_trace_entry
+	bne	syscall_entry_trace
 syscall_call:
 	add	d0,d0,a1
 	add	a1,a1
@@ -104,11 +104,10 @@ restore_all:
 syscall_exit_work:
 	btst	_TIF_SYSCALL_TRACE,d2
 	beq	work_pending
-	__sti				# could let do_syscall_trace() call
+	__sti				# could let syscall_trace_exit() call
 					# schedule() instead
 	mov	fp,d0
-	mov	1,d1
-	call	do_syscall_trace[],0	# do_syscall_trace(regs,entryexit)
+	call	syscall_trace_exit[],0	# do_syscall_trace(regs)
 	jmp	resume_userspace
 
 	ALIGN
@@ -138,13 +137,11 @@ work_notifysig:
 	jmp	resume_userspace
 
 	# perform syscall entry tracing
-syscall_trace_entry:
+syscall_entry_trace:
 	mov	-ENOSYS,d0
 	mov	d0,(REG_D0,fp)
 	mov	fp,d0
-	clr	d1
-	call	do_syscall_trace[],0
-	mov	(REG_ORIG_D0,fp),d0
+	call	syscall_trace_entry[],0	# returns the syscall number to actually use
 	mov	(REG_D1,fp),d1
 	cmp	nr_syscalls,d0
 	bcs	syscall_call
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 6b287f2e8e8..4fa0e3648d8 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -48,8 +48,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	 * table entries. */
 }
 
 /*
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
index d6d6cdc75c5..e143339ad28 100644
--- a/arch/mn10300/kernel/ptrace.c
+++ b/arch/mn10300/kernel/ptrace.c
@@ -17,6 +17,9 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+#include <linux/tracehook.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -64,12 +67,6 @@ static inline int get_stack_long(struct task_struct *task, int offset)
 		((unsigned long) task->thread.uregs + offset);
 }
 
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the TSS.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
 static inline
 int put_stack_long(struct task_struct *task, int offset, unsigned long data)
 {
@@ -80,94 +77,233 @@ int put_stack_long(struct task_struct *task, int offset, unsigned long data)
 	return 0;
 }
 
-static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
-				       struct task_struct *tsk)
+/*
+ * retrieve the contents of MN10300 userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
 {
-	return __copy_to_user(buf, &tsk->thread.fpu_state,
-			      sizeof(struct fpu_state_struct));
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* we need to skip regs->next */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs, 0, PT_ORIG_D0 * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &regs->orig_d0, PT_ORIG_D0 * sizeof(long),
+				  NR_PTREGS * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					NR_PTREGS * sizeof(long), -1);
 }
 
-static inline unsigned long set_fpregs(struct task_struct *tsk,
-				       struct fpu_state_struct *buf)
+/*
+ * update the contents of the MN10300 userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
 {
-	return __copy_from_user(&tsk->thread.fpu_state, buf,
-				sizeof(struct fpu_state_struct));
+	struct pt_regs *regs = task_pt_regs(target);
+	unsigned long tmp;
+	int ret;
+
+	/* we need to skip regs->next */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs, 0, PT_ORIG_D0 * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->orig_d0, PT_ORIG_D0 * sizeof(long),
+				 PT_EPSW * sizeof(long));
+	if (ret < 0)
+		return ret;
+
+	/* we need to mask off changes to EPSW */
+	tmp = regs->epsw;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &tmp, PT_EPSW * sizeof(long),
+				 PT_PC * sizeof(long));
+	tmp &= EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | EPSW_FLAG_Z;
+	tmp |= regs->epsw & ~(EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N |
+			      EPSW_FLAG_Z);
+	regs->epsw = tmp;
+
+	if (ret < 0)
+		return ret;
+
+	/* and finally load the PC */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->pc, PT_PC * sizeof(long),
+				 NR_PTREGS * sizeof(long));
+
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					 NR_PTREGS * sizeof(long), -1);
 }
 
-static inline void fpsave_init(struct task_struct *task)
+/*
+ * retrieve the contents of MN10300 userspace FPU registers
+ */
+static int fpuregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
 {
-	memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+	const struct fpu_state_struct *fpregs = &target->thread.fpu_state;
+	int ret;
+
+	unlazy_fpu(target);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  fpregs, 0, sizeof(*fpregs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*fpregs), -1);
 }
 
 /*
- * make sure the single step bit is not set
+ * update the contents of the MN10300 userspace FPU registers
  */
-void ptrace_disable(struct task_struct *child)
+static int fpuregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct fpu_state_struct fpu_state = target->thread.fpu_state;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &fpu_state, 0, sizeof(fpu_state));
+	if (ret < 0)
+		return ret;
+
+	fpu_kill_state(target);
+	target->thread.fpu_state = fpu_state;
+	set_using_fpu(target);
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					 sizeof(fpu_state), -1);
+}
+
+/*
+ * determine if the FPU registers have actually been used
+ */
+static int fpuregs_active(struct task_struct *target,
+			  const struct user_regset *regset)
+{
+	return is_using_fpu(target) ? regset->n : 0;
+}
+
+/*
+ * Define the register sets available on the MN10300 under Linux
+ */
+enum mn10300_regset {
+	REGSET_GENERAL,
+	REGSET_FPU,
+};
+
+static const struct user_regset mn10300_regsets[] = {
+	/*
+	 * General register format is:
+	 *	A3, A2, D3, D2, MCVF, MCRL, MCRH, MDRQ
+	 *	E1, E0, E7...E2, SP, LAR, LIR, MDR
+	 *	A1, A0, D1, D0, ORIG_D0, EPSW, PC
+	 */
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+	/*
+	 * FPU register format is:
+	 *	FS0-31, FPCR
+	 */
+	[REGSET_FPU] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= sizeof(struct fpu_state_struct) / sizeof(long),
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= fpuregs_get,
+		.set		= fpuregs_set,
+		.active		= fpuregs_active,
+	},
+};
+
+static const struct user_regset_view user_mn10300_native_view = {
+	.name		= "mn10300",
+	.e_machine	= EM_MN10300,
+	.regsets	= mn10300_regsets,
+	.n		= ARRAY_SIZE(mn10300_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_mn10300_native_view;
+}
+
+/*
+ * set the single-step bit
+ */
+void user_enable_single_step(struct task_struct *child)
 {
 #ifndef CONFIG_MN10300_USING_JTAG
 	struct user *dummy = NULL;
 	long tmp;
 
 	tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
-	tmp &= ~EPSW_T;
+	tmp |= EPSW_T;
 	put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
 #endif
 }
 
 /*
- * set the single step bit
+ * make sure the single-step bit is not set
  */
-void ptrace_enable(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 #ifndef CONFIG_MN10300_USING_JTAG
 	struct user *dummy = NULL;
 	long tmp;
 
 	tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
-	tmp |= EPSW_T;
+	tmp &= ~EPSW_T;
 	put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
 #endif
 }
 
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
+
 /*
  * handle the arch-specific side of process tracing
  */
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	struct fpu_state_struct fpu_state;
-	int i, ret;
+	unsigned long tmp;
+	int ret;
 
 	switch (request) {
-	/* read the word at location addr. */
-	case PTRACE_PEEKTEXT: {
-		unsigned long tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp, (unsigned long *) data);
-		break;
-	}
-
-	/* read the word at location addr. */
-	case PTRACE_PEEKDATA: {
-		unsigned long tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp, (unsigned long *) data);
-		break;
-	}
-
 	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long tmp;
-
+	case PTRACE_PEEKUSR:
 		ret = -EIO;
 		if ((addr & 3) || addr < 0 ||
 		    addr > sizeof(struct user) - 3)
@@ -179,17 +315,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					     ptrace_regid_to_frame[addr]);
 		ret = put_user(tmp, (unsigned long *) data);
 		break;
-	}
-
-	/* write the word at location addr. */
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
-		    sizeof(data))
-			ret = 0;
-		else
-			ret = -EIO;
-		break;
 
 		/* write the word at location addr in the USER area */
 	case PTRACE_POKEUSR:
@@ -204,132 +329,32 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					     data);
 		break;
 
-		/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-		/* restart after signal. */
-	case PTRACE_CONT:
-		ret = -EIO;
-		if ((unsigned long) data > _NSIG)
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		ptrace_disable(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-		/*
-		 * make the child exit
-		 * - the best I can do is send it a sigkill
-		 * - perhaps it should be put in the status that it wants to
-		 *   exit
-		 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		ptrace_disable(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP: /* set the trap flag. */
-#ifndef CONFIG_MN10300_USING_JTAG
-		ret = -EIO;
-		if ((unsigned long) data > _NSIG)
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_enable(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-#else
-		ret = -EINVAL;
-#endif
-		break;
-
-	case PTRACE_DETACH:	/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-		/* Get all gp regs from the child. */
-	case PTRACE_GETREGS: {
-		unsigned long tmp;
-
-		if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
-			ret = -EIO;
-			break;
-		}
-
-		for (i = 0; i < NR_PTREGS << 2; i += 4) {
-			tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
-			__put_user(tmp, (unsigned long *) data);
-			data += sizeof(tmp);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-		unsigned long tmp;
-
-		if (!access_ok(VERIFY_READ, (unsigned long *)data,
-			       sizeof(struct pt_regs))) {
-			ret = -EIO;
-			break;
-		}
-
-		for (i = 0; i < NR_PTREGS << 2; i += 4) {
-			__get_user(tmp, (unsigned long *) data);
-			put_stack_long(child, ptrace_regid_to_frame[i], tmp);
-			data += sizeof(tmp);
-		}
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_GETFPREGS: { /* Get the child FPU state. */
-		if (is_using_fpu(child)) {
-			unlazy_fpu(child);
-			fpu_state = child->thread.fpu_state;
-		} else {
-			memset(&fpu_state, 0, sizeof(fpu_state));
-		}
-
-		ret = -EIO;
-		if (copy_to_user((void *) data, &fpu_state,
-				 sizeof(fpu_state)) == 0)
-			ret = 0;
-		break;
-	}
-
-	case PTRACE_SETFPREGS: { /* Set the child FPU state. */
-		ret = -EFAULT;
-		if (copy_from_user(&fpu_state, (const void *) data,
-				   sizeof(fpu_state)) == 0) {
-			fpu_kill_state(child);
-			child->thread.fpu_state = fpu_state;
-			set_using_fpu(child);
-			ret = 0;
-		}
-		break;
-	}
-
-	case PTRACE_SETOPTIONS: {
-		if (data & PTRACE_O_TRACESYSGOOD)
-			child->ptrace |= PT_TRACESYSGOOD;
-		else
-			child->ptrace &= ~PT_TRACESYSGOOD;
-		ret = 0;
-		break;
-	}
+	case PTRACE_GETREGS:	/* Get all integer regs from the child. */
+		return copy_regset_to_user(child, &user_mn10300_native_view,
+					   REGSET_GENERAL,
+					   0, NR_PTREGS * sizeof(long),
+					   (void __user *)data);
+
+	case PTRACE_SETREGS:	/* Set all integer regs in the child. */
+		return copy_regset_from_user(child, &user_mn10300_native_view,
+					     REGSET_GENERAL,
+					     0, NR_PTREGS * sizeof(long),
+					     (const void __user *)data);
+
+	case PTRACE_GETFPREGS:	/* Get the child FPU state. */
+		return copy_regset_to_user(child, &user_mn10300_native_view,
+					   REGSET_FPU,
+					   0, sizeof(struct fpu_state_struct),
+					   (void __user *)data);
+
+	case PTRACE_SETFPREGS:	/* Set the child FPU state. */
+		return copy_regset_from_user(child, &user_mn10300_native_view,
+					     REGSET_FPU,
+					     0, sizeof(struct fpu_state_struct),
+					     (const void __user *)data);
 
 	default:
-		ret = -EIO;
+		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
 
@@ -337,43 +362,26 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 }
 
 /*
- * notification of system call entry/exit
- * - triggered by current->work.syscall_trace
+ * handle tracing of system call entry
+ * - return the revised system call number or ULONG_MAX to cause ENOSYS
  */
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs)
 {
-#if 0
-	/* just in case... */
-	printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
-	       current->pid,
-	       regs->orig_d0,
-	       regs->a0,
-	       regs->d1,
-	       regs->a3,
-	       regs->a2,
-	       regs->d0);
-	return;
-#endif
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
+	if (tracehook_report_syscall_entry(regs))
+		/* tracing decided this syscall should not happen, so
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in
+		 * regs->orig_d0
+		 */
+		return ULONG_MAX;
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP |
-		      ((current->ptrace & PT_TRACESYSGOOD) &&
-		       !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+	return regs->orig_d0;
+}
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+/*
+ * handle tracing of system call exit
+ */
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
+{
+	tracehook_report_syscall_exit(regs, 0);
 }
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 841ca9955a1..9f7572a0f57 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/personality.h>
 #include <linux/suspend.h>
+#include <linux/tracehook.h>
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
@@ -511,6 +512,9 @@ static void do_signal(struct pt_regs *regs)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+						 test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
@@ -561,4 +565,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 	/* deal with pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(__frame);
+	}
 }
diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S
index 789208094e9..7095147dcb8 100644
--- a/arch/mn10300/mm/tlb-mn10300.S
+++ b/arch/mn10300/mm/tlb-mn10300.S
@@ -165,24 +165,6 @@ ENTRY(itlb_aerror)
 ENTRY(dtlb_aerror)
 	and	~EPSW_NMID,epsw
 	add	-4,sp
-	mov	d1,(sp)
-
-	movhu	(MMUFCR_DFC),d1			# is it the initial valid write
-						# to this page?
-	and	MMUFCR_xFC_INITWR,d1
- 	beq	dtlb_pagefault			# jump if not
-
-	mov	(DPTEL),d1			# set the dirty bit
-						# (don't replace with BSET!)
-	or	_PAGE_DIRTY,d1
-	mov	d1,(DPTEL)
-	mov	(sp),d1
-	add	4,sp
- 	rti
-
-	ALIGN
-dtlb_pagefault:
-	mov	(sp),d1
 	SAVE_ALL
 	add	-4,sp				# need to pass three params
 
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index ada3e5364d8..7eeaff94436 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -338,6 +338,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #endif /* CONFIG_64BIT */
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 
 #endif /* _ASM_PARISC_ATOMIC_H_ */
diff --git a/arch/parisc/include/asm/bitsperlong.h b/arch/parisc/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..75196b415d3
--- /dev/null
+++ b/arch/parisc/include/asm/bitsperlong.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_PARISC_BITSPERLONG_H
+#define __ASM_PARISC_BITSPERLONG_H
+
+/*
+ * using CONFIG_* outside of __KERNEL__ is wrong,
+ * __LP64__ was also removed from headers, so what
+ * is the right approach on parisc?
+ *	-arnd
+ */
+#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__)
+#define __BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
+#else
+#define __BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_PARISC_BITSPERLONG_H */
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 7bc5125d7d4..a84cc1f925f 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -159,6 +159,6 @@ extern int npmem_ranges;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _PARISC_PAGE_H */
diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h
index 7f5a39bfb4c..20135cc8003 100644
--- a/arch/parisc/include/asm/types.h
+++ b/arch/parisc/include/asm/types.h
@@ -14,14 +14,6 @@ typedef unsigned short umode_t;
  */
 #ifdef __KERNEL__
 
-#ifdef CONFIG_64BIT
-#define BITS_PER_LONG 64
-#define SHIFT_PER_LONG 6
-#else
-#define BITS_PER_LONG 32
-#define SHIFT_PER_LONG 5
-#endif
-
 #ifndef __ASSEMBLY__
 
 /* Dma addresses are 32-bits wide.  */
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index cd4c0b2a8e7..7cf799d70b4 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -7,7 +7,7 @@
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/cache.h>
-#include <asm-generic/uaccess.h>
+#include <asm-generic/uaccess-unaligned.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 4ea4229d765..8007f1e6572 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -130,15 +130,17 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 	return cpu_dest;
 }
 
-static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
+static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu_dest;
 
 	cpu_dest = cpu_check_affinity(irq, dest);
 	if (cpu_dest < 0)
-		return;
+		return -1;
 
 	cpumask_copy(&irq_desc[irq].affinity, dest);
+
+	return 0;
 }
 #endif
 
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index ecd1c502444..ef5caf2e6ed 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -267,8 +267,6 @@ void module_free(struct module *mod, void *module_region)
 	mod->arch.section = NULL;
 
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* Additional bytes needed in front of individual sections */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a0d1146a057..cdc9a6ff4be 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -868,6 +868,18 @@ config TASK_SIZE
 	default "0x80000000" if PPC_PREP || PPC_8xx
 	default "0xc0000000"
 
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	default "0x00200000" if NOT_COHERENT_CACHE
+
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8da2bf963b5..9ae7b7e2ba7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -346,7 +346,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
-	otheros.bld *.dtb
+	simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index 45d06a8c7cd..c2baae0a3d8 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -42,7 +42,7 @@ int main(int argc, char *argv[])
 {
 	int	in_fd, out_fd;
 	int	nblks, i;
-	uint	cksum, *cp;
+	unsigned int	cksum, *cp;
 	struct	stat	st;
 	boot_block_t	bt;
 
@@ -90,7 +90,7 @@ int main(int argc, char *argv[])
 
 	cksum = 0;
 	cp = (void *)&bt;
-	for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+	for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
 		cksum += *cp++;
 
 	/* Assume zImage is an ELF file, and skip the 64K header.
@@ -101,7 +101,7 @@ int main(int argc, char *argv[])
 		exit(4);
 	}
 
-	if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+	if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
 		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
 		exit(4);
 	}
@@ -125,8 +125,8 @@ int main(int argc, char *argv[])
 			perror("zImage read");
 			exit(5);
 		}
-		cp = (uint *)tmpbuf;
-		for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+		cp = (unsigned int *)tmpbuf;
+		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
 			cksum += *cp++;
 		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
 			perror("boot-image write");
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index fc4a39a40e7..27893971377 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:47 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:05 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -565,6 +586,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -608,7 +633,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -796,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -810,11 +832,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1101,6 +1128,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1248,11 +1281,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 409d017621a..c5c0fe71a43 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,6 +685,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -942,6 +970,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -957,12 +986,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -981,6 +1013,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -1077,7 +1110,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1330,6 +1364,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1442,11 +1482,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 03db97c6cf3..af4952feba3 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:49 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -721,6 +746,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1003,6 +1031,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1018,12 +1047,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1042,6 +1074,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -1138,7 +1171,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1391,6 +1425,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1503,11 +1543,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index fb17de53cc0..8c8f660b4fc 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:50 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:07 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -548,6 +573,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -790,6 +818,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -804,11 +833,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -906,7 +938,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1022,6 +1055,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index a012ce23520..227dbba7679 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:52 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:08 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -551,6 +577,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -570,6 +598,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -580,14 +609,15 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -820,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -835,12 +865,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -859,6 +892,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -955,7 +989,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1133,6 +1168,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 4bcc4a1ff30..24ee7fcac87 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1246,6 +1274,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 9ba5518ce8d..7f39543205a 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:10 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1125,6 +1153,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 18e4bc0b3c1..1cd1fcac22c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:11 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -476,6 +498,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -731,6 +755,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -745,11 +770,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -847,7 +875,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -963,6 +992,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 76db8138eac..ce5177393a0 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:58 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_ASP834x is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -293,7 +308,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -630,6 +654,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -872,6 +899,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -886,11 +914,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1019,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1104,6 +1136,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 0dc11c44306..7f1d1383a24 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:13 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_ASP834x is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -924,6 +945,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -956,7 +978,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -999,6 +1022,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_UCC_SLOW=y
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1110,11 +1139,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index e42f6b3917d..bf636fd560a 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -608,6 +633,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +875,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -862,11 +890,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -964,7 +995,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1026,6 +1058,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 408022f79a5..fe6454eacbd 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:14 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -614,6 +639,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -657,7 +686,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +873,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -862,11 +888,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -976,15 +1005,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1140,6 +1173,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a0c42fb65cb..fe08f672cb2 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_SBC834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -292,7 +307,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -474,6 +496,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -517,7 +543,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -697,6 +719,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -711,11 +734,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -813,7 +839,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -849,6 +875,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 6479bb9f3f5..09146ddaa3c 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:16 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -163,6 +174,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y
 # CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -544,6 +565,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -663,6 +685,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -726,7 +749,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -786,6 +810,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 905e8a3388d..7b43be7586b 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,16 +126,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -432,6 +452,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -441,6 +463,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -607,7 +629,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -666,6 +689,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -922,6 +961,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 095e2ded6e8..62adb71a5d4 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:09 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -470,6 +491,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +516,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -503,10 +527,12 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -651,6 +679,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -719,7 +748,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -781,6 +811,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index f95961c04a2..41209e3a654 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:18 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,16 +127,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -521,6 +543,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -540,6 +564,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -550,10 +575,12 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -750,7 +778,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -812,6 +841,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index e68e80987aa..6c36c9c7abf 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:15 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:19 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -461,6 +482,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -717,6 +745,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -784,6 +817,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -918,6 +965,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index b1c766ef7e2..4aaf1a6bdc7 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -439,6 +461,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -603,7 +625,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -692,6 +714,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -958,6 +996,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 0cc9048290a..79984589db6 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-# Sat Oct 18 11:06:13 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:21 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,12 +178,14 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -181,14 +201,16 @@ CONFIG_MPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_OLD_DRIVERS is not set
-# CONFIG_CAN_SLCAN is not set
-CONFIG_CAN_SJA1000=y
-CONFIG_CAN_SJA1000_MEM_OF=y
-# CONFIG_CAN_EMS_PCI is not set
-# CONFIG_CAN_IXXAT_PCI is not set
-# CONFIG_CAN_PEAK_PCI is not set
-# CONFIG_CAN_KVASER_PCI is not set
-# CONFIG_CAN_MSCAN is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -378,6 +402,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
 CONFIG_MTD_NAND_SOCRATES=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -581,22 +630,28 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_TSC2003=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -734,44 +806,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_SOCRATES=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -893,6 +1002,7 @@ CONFIG_DAB=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -988,9 +1098,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
-CONFIG_RTC_DRV_RX8025=y
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_PPC=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1190,6 +1350,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index eb4ba7a5f41..bd1bfcddbd0 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,6 +184,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
@@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_LOG is not set
 # CONFIG_IP_NF_TARGET_ULOG is not set
 # CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
 # CONFIG_IP_NF_RAW is not set
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
@@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -837,6 +871,7 @@ CONFIG_PRINTER=m
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -964,6 +996,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -978,11 +1011,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1075,7 +1112,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1138,6 +1175,11 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f4379b1cf84..767600145fb 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:19 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
@@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -597,6 +621,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -853,6 +881,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -955,7 +987,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1017,6 +1050,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,11 +1161,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index b8669231c1f..52fafc006dd 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1050,6 +1084,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 43030fea2ee..8b4faae7a9a 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Mon Mar 16 09:03:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -123,10 +127,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +183,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -302,7 +312,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -581,6 +592,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -817,6 +832,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -919,7 +938,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1009,6 +1028,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1114,11 +1139,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index d5a864d7446..170360934ce 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:21 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1050,6 +1084,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index a25009174f3..f41cc2444d4 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:22 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1050,6 +1084,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index df2c1633779..b6a23af57f4 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Fri Mar 13 15:36:11 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:31 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -100,21 +103,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -123,10 +129,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y
 # CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +314,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -495,6 +508,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -885,6 +903,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -929,7 +950,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1122,7 +1143,6 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1178,6 +1198,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1192,11 +1213,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1553,6 +1582,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1697,11 +1732,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index bd236b3d915..a66910e6334 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Jan 28 23:05:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -96,20 +99,23 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,10 +124,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
 CONFIG_GEF_SBC310=y
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -298,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
@@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -674,6 +688,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -717,7 +735,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -894,7 +912,6 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -949,6 +966,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -963,11 +981,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1323,6 +1349,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1470,11 +1502,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1ab5abae00a..c6a7fc82b69 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:30 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,10 +74,20 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,21 +103,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +129,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -298,7 +315,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -490,6 +509,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -880,6 +909,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -923,7 +956,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 CONFIG_DS1682=y
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1174,6 +1204,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1188,11 +1219,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1549,6 +1588,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index bbdf4bfc432..cfd2efcc6bc 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8610=y
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -291,7 +308,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -774,7 +802,6 @@ CONFIG_ULI526X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
@@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1165,7 +1193,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1280,6 +1309,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 92acfdf3540..0bee3e30394 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,11 +72,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +129,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -297,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1450,6 +1389,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1604,11 +1549,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 04797e730c5..c30a0c71587 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:23 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:27 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,10 +73,20 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -90,21 +102,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,10 +128,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -296,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -488,6 +507,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -762,6 +788,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -805,7 +835,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1022,6 +1049,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1036,11 +1064,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1145,7 +1176,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1228,6 +1260,11 @@ CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index aaab5cc3751..74f7f7c6fdc 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:50 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -106,10 +116,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -699,6 +708,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -742,6 +756,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -753,7 +768,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5103319a7f5..9ffa8de9280 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:51 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,12 +72,22 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,6 +134,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y
 # CONFIG_PPC_PRPMC2800 is not set
 CONFIG_PPC_C2K=y
 CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 CONFIG_BRIDGE_NF_EBTABLES=m
@@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
@@ -566,6 +582,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -924,6 +944,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=m
 CONFIG_GEN_RTC=m
 # CONFIG_GEN_RTC_X is not set
@@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 CONFIG_SENSORS_GL518SM=m
 # CONFIG_SENSORS_GL520SM is not set
 CONFIG_SENSORS_IT87=m
@@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 CONFIG_SENSORS_SMSC47M1=m
@@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
 # CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
@@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -1554,6 +1583,11 @@ CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1637,6 +1671,7 @@ CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1719,12 +1755,15 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1788,18 +1833,21 @@ CONFIG_TRACING=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index add6419c15d..04915c3a43f 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -104,10 +114,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -167,6 +172,8 @@ CONFIG_8272=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,7 +283,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -550,6 +560,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -751,8 +766,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -781,6 +799,10 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index b2fdfd9e183..c2a439595f4 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -631,6 +640,7 @@ CONFIG_DAB=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -655,6 +665,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -698,6 +713,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -709,7 +725,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 15900dcf0bf..a4053ab9e24 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar  6 00:07:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:54 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +70,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -124,10 +130,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -299,7 +311,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -805,6 +824,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 CONFIG_TULIP=y
@@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -843,8 +865,8 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,6 +1105,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1096,11 +1120,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1195,7 +1222,6 @@ CONFIG_HID=m
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1456,6 +1486,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index c58c38d5b7a..31e1df66515 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:30 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,10 +121,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -171,7 +179,9 @@ CONFIG_8272=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,7 +296,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -551,6 +564,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -751,6 +769,10 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -887,11 +910,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 297b5d5042b..24fa90792c5 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:32 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -103,10 +116,12 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -686,6 +700,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -739,6 +758,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -750,7 +770,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,11 +817,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -917,6 +950,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 38712e861c4..642ab67c843 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:33 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:56 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_PRPMC2800 is not set
 # CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 CONFIG_MPIC_WEIRD=y
@@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,7 +292,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -554,6 +575,7 @@ CONFIG_SATA_MV=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -587,6 +609,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -839,7 +865,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -902,6 +929,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index d85a43cb821..cb966ca2ce8 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:57 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,7 +286,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -554,6 +564,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -809,8 +823,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -842,6 +859,10 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -971,11 +993,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 45f03cad8db..433c303eb82 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:36 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -58,6 +59,7 @@ CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +318,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +738,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -992,6 +1019,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1006,11 +1034,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
@@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1286,6 +1323,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 1793d08e9c0..3add6f62b21 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -103,10 +113,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -622,7 +636,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -683,6 +698,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -725,6 +745,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -736,7 +757,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -782,11 +803,11 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -903,6 +935,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index adc756e1f25..5bb1b8eb0b4 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,11 +73,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -116,10 +130,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 CONFIG_SBC8641D=y
 CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
 CONFIG_MPC8641=y
 CONFIG_MPC8610=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -299,7 +315,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -653,6 +679,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1481,6 +1420,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1635,11 +1580,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 4b76321c0ec..42e64ebc279 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:41 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -642,6 +651,7 @@ CONFIG_DAB=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -666,6 +676,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -709,6 +724,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -720,7 +736,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 5339bb44cce..ea8870a3448 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:51 2008
+# Linux kernel version: 2.6.30-rc7
+# Mon May 25 14:53:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -52,12 +53,14 @@ CONFIG_OF=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,14 +75,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +131,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 CONFIG_FREEZER=y
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y
 CONFIG_PPC601_SYNC_FIX=y
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
@@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
 
 #
 # DCCP Kernel Hacking
@@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 CONFIG_IRDA=m
@@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
 # CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
@@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m
 # CONFIG_BT_HCIBTUART is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
@@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
 
 #
@@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -898,6 +937,8 @@ CONFIG_BMAC=y
 CONFIG_SUNGEM=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -913,7 +954,6 @@ CONFIG_PCNET32=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -923,6 +963,7 @@ CONFIG_PCNET32=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
@@ -997,15 +1033,17 @@ CONFIG_PRISM54=m
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
+CONFIG_P54_LEDS=y
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
 CONFIG_B43_PCI_AUTOSELECT=y
@@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 # CONFIG_B43LEGACY_PIO_MODE is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=y
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=m
 CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
@@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y
 # CONFIG_FB_KYRO is not set
 CONFIG_FB_3DFX=y
 # CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
@@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
 CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRMIDI is not set
@@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_ONETOUCH=m
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
@@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 # CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1801,6 +1877,11 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 CONFIG_HFS_FS=m
@@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
@@ -1954,15 +2035,18 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
@@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index fdded96633a..129d80860f2 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:42 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -106,10 +119,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -276,7 +290,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -606,6 +623,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
@@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -945,6 +970,10 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1074,11 +1104,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e971db17113..e9f287f313f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:03 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,9 +72,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,16 +130,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y
 CONFIG_PPC_PRPMC2800=y
 # CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -740,6 +764,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +807,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1012,6 +1038,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1026,11 +1053,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1348,6 +1382,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index ac14f5245d2..e28e65e7a0e 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 09:28:45 2009
+# Linux kernel version: 2.6.30-rc5
+# Fri May 15 10:37:00 2009
 #
 CONFIG_PPC64=y
 
 #
 # Processor support
 #
+CONFIG_PPC_BOOK3S=y
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
 CONFIG_POWER4=y
@@ -55,9 +56,11 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +75,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
@@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y
 # CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -316,7 +326,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
@@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
@@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_UEVENT is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
@@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
@@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-# CONFIG_HID_COMPAT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
 # CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
@@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
 # CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
+CONFIG_HID_SONY=m
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_GREENASIA_FF is not set
 # CONFIG_HID_TOPSEED is not set
@@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_PPC=m
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_PS3=m
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1161,6 +1161,11 @@ CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1371,18 +1384,21 @@ CONFIG_TRACING=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 94903465ea1..bd4a8d435c5 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar  6 00:09:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,16 +117,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,6 +183,8 @@ CONFIG_STORCENTER=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +296,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=m
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -500,6 +508,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -681,8 +695,8 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -696,7 +710,6 @@ CONFIG_R8169=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1113,6 +1128,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_EXPORTFS=m
 
@@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1246,11 +1268,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index b401950f525..b7d2d07b6f9 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -472,6 +472,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #endif /* __powerpc64__ */
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/arch/powerpc/include/asm/bitsperlong.h b/arch/powerpc/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..5f1659032c4
--- /dev/null
+++ b/arch/powerpc/include/asm/bitsperlong.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_POWERPC_BITSPERLONG_H
+#define __ASM_POWERPC_BITSPERLONG_H
+
+#if defined(__powerpc64__)
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_POWERPC_BITSPERLONG_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index c69f2b5f0cc..cb448d68452 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -26,7 +26,9 @@
  * allocate the space "normally" and use the cache management functions
  * to ensure it is consistent.
  */
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+				  dma_addr_t *handle, gfp_t gfp);
 extern void __dma_free_coherent(size_t size, void *vaddr);
 extern void __dma_sync(void *vaddr, size_t size, int direction);
 extern void __dma_sync_page(struct page *page, unsigned long offset,
@@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
  * Cache coherent cores.
  */
 
-#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
 #define __dma_free_coherent(size, addr)		((void)0)
 #define __dma_sync(addr, size, rw)		((void)0)
 #define __dma_sync_page(pg, off, sz, rw)	((void)0)
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index d60fd18f428..f1f4e23a84e 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -14,8 +14,6 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-extern unsigned long FIXADDR_TOP;
-
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/page.h>
@@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP;
 #include <asm/kmap_types.h>
 #endif
 
+#define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
+
 /*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index b7e034b0a6d..53512374e1c 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -131,5 +131,41 @@ static inline int irqs_disabled_flags(unsigned long flags)
  */
 struct irq_chip;
 
+#ifdef CONFIG_PERF_COUNTERS
+static inline unsigned long test_perf_counter_pending(void)
+{
+	unsigned long x;
+
+	asm volatile("lbz %0,%1(13)"
+		: "=r" (x)
+		: "i" (offsetof(struct paca_struct, perf_counter_pending)));
+	return x;
+}
+
+static inline void set_perf_counter_pending(void)
+{
+	asm volatile("stb %0,%1(13)" : :
+		"r" (1),
+		"i" (offsetof(struct paca_struct, perf_counter_pending)));
+}
+
+static inline void clear_perf_counter_pending(void)
+{
+	asm volatile("stb %0,%1(13)" : :
+		"r" (0),
+		"i" (offsetof(struct paca_struct, perf_counter_pending)));
+}
+
+#else
+
+static inline unsigned long test_perf_counter_pending(void)
+{
+	return 0;
+}
+
+static inline void set_perf_counter_pending(void) {}
+static inline void clear_perf_counter_pending(void) {}
+#endif /* CONFIG_PERF_COUNTERS */
+
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
index c59ee7e4bed..1b9692c6089 100644
--- a/arch/powerpc/include/asm/iseries/iommu.h
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -26,10 +26,6 @@ struct vio_dev;
 struct device_node;
 struct iommu_table;
 
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
-				       struct device_node *dn);
-
 /* Get table parameters from HV */
 extern void iommu_table_getparms_iSeries(unsigned long busno,
 		unsigned char slotno, unsigned char virtbus,
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index e7b99bac9f4..7b1c49811a2 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_POWERPC_MMAN_H
 #define _ASM_POWERPC_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 /*
  * This program is free software; you can redistribute it and/or
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index a218da6bec7..fb841205745 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -28,6 +28,10 @@
 #define MPC52xx_PSC_MAXNUM	6
 
 /* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_UNEX_RX	0x0001
+#define MPC52xx_PSC_SR_DATA_VAL	0x0002
+#define MPC52xx_PSC_SR_DATA_OVR	0x0004
+#define MPC52xx_PSC_SR_CMDSEND	0x0008
 #define MPC52xx_PSC_SR_CDE	0x0080
 #define MPC52xx_PSC_SR_RXRDY	0x0100
 #define MPC52xx_PSC_SR_RXFULL	0x0200
@@ -61,6 +65,12 @@
 #define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
 
 /* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_UNEX_RX_SLOT 0x0001
+#define MPC52xx_PSC_IMR_DATA_VALID	0x0002
+#define MPC52xx_PSC_IMR_DATA_OVR	0x0004
+#define MPC52xx_PSC_IMR_CMD_SEND	0x0008
+#define MPC52xx_PSC_IMR_ERROR		0x0040
+#define MPC52xx_PSC_IMR_DEOF		0x0080
 #define MPC52xx_PSC_IMR_TXRDY		0x0100
 #define MPC52xx_PSC_IMR_RXRDY		0x0200
 #define MPC52xx_PSC_IMR_DB		0x0400
@@ -117,6 +127,7 @@
 #define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_AWR			(1 << 30)
 #define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
 #define MPC52xx_PSC_SICR_I2S			(1 << 22)
 #define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 082b3aedf14..6ef05572301 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -99,6 +99,7 @@ struct paca_struct {
 	u8 soft_enabled;		/* irq soft-enable flag */
 	u8 hard_enabled;		/* set if irqs are enabled in MSR */
 	u8 io_sync;			/* writel() needs spin_unlock sync */
+	u8 perf_counter_pending;	/* PM interrupt while soft-disabled */
 
 	/* Stuff for accurate time accounting */
 	u64 user_time;			/* accumulated usermode TB ticks */
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index a0e3f6e6b4e..bd0849dbcaa 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -41,7 +41,7 @@ extern void clear_pages(void *page, int order);
 static inline void clear_page(void *page) { clear_pages(page, 0); }
 extern void copy_page(void *to, void *from);
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #define PGD_T_LOG2	(__builtin_ffs(sizeof(pgd_t)) - 1)
 #define PTE_T_LOG2	(__builtin_ffs(sizeof(pte_t)) - 1)
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 043bfdfe4f7..5817a3b747e 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -180,6 +180,6 @@ do {						\
 	(test_thread_flag(TIF_32BIT) ? \
 	 VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
new file mode 100644
index 00000000000..cc7c887705b
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -0,0 +1,98 @@
+/*
+ * Performance counter support - PowerPC-specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+
+#define MAX_HWCOUNTERS		8
+#define MAX_EVENT_ALTERNATIVES	8
+#define MAX_LIMITED_HWCOUNTERS	2
+
+/*
+ * This struct provides the constants and functions needed to
+ * describe the PMU on a particular POWER-family CPU.
+ */
+struct power_pmu {
+	int	n_counter;
+	int	max_alternatives;
+	u64	add_fields;
+	u64	test_adder;
+	int	(*compute_mmcr)(u64 events[], int n_ev,
+				unsigned int hwc[], u64 mmcr[]);
+	int	(*get_constraint)(u64 event, u64 *mskp, u64 *valp);
+	int	(*get_alternatives)(u64 event, unsigned int flags,
+				    u64 alt[]);
+	void	(*disable_pmc)(unsigned int pmc, u64 mmcr[]);
+	int	(*limited_pmc_event)(u64 event);
+	u32	flags;
+	int	n_generic;
+	int	*generic_events;
+	int	(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+extern struct power_pmu *ppmu;
+
+/*
+ * Values for power_pmu.flags
+ */
+#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
+#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
+
+/*
+ * Values for flags to get_alternatives()
+ */
+#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
+#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
+#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
+
+struct pt_regs;
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+
+/*
+ * The power_pmu.get_constraint function returns a 64-bit value and
+ * a 64-bit mask that express the constraints between this event and
+ * other events.
+ *
+ * The value and mask are divided up into (non-overlapping) bitfields
+ * of three different types:
+ *
+ * Select field: this expresses the constraint that some set of bits
+ * in MMCR* needs to be set to a specific value for this event.  For a
+ * select field, the mask contains 1s in every bit of the field, and
+ * the value contains a unique value for each possible setting of the
+ * MMCR* bits.  The constraint checking code will ensure that two events
+ * that set the same field in their masks have the same value in their
+ * value dwords.
+ *
+ * Add field: this expresses the constraint that there can be at most
+ * N events in a particular class.  A field of k bits can be used for
+ * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
+ * set (and the other bits 0), and the value has only the least significant
+ * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
+ * in the struct power_pmu for this processor come into play.  The
+ * add_fields value contains 1 in the LSB of the field, and the
+ * test_adder contains 2^(k-1) - 1 - N in the field.
+ *
+ * NAND field: this expresses the constraint that you may not have events
+ * in all of a set of classes.  (For example, on PPC970, you can't select
+ * events from the FPU, ISU and IDU simultaneously, although any two are
+ * possible.)  For N classes, the field is N+1 bits wide, and each class
+ * is assigned one bit from the least-significant N bits.  The mask has
+ * only the most-significant bit set, and the value has only the bit
+ * for the event's class set.  The test_adder has the least significant
+ * bit set in the field.
+ *
+ * If an event is not subject to the constraint expressed by a particular
+ * field, then it will have 0 in both the mask and value for that field.
+ */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index ba45c997830..c9ff9d75990 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -10,7 +10,7 @@
 
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
 
 #ifdef CONFIG_44x
 extern int icache_44x_need_flush;
@@ -56,8 +56,30 @@ extern int icache_44x_need_flush;
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
 
 /*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP	PKMAP_BASE
+#else
+#define KVIRT_TOP	(0xfe000000UL)	/* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP	((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP	KVIRT_TOP
+#endif
+
+/*
  * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
  * physical memory until the kernel virtual memory starts.  That means that
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index e8018d540e8..fb359b0a693 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -492,11 +492,13 @@
 #define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1	798
 #define SPRN_MMCRA	0x312
+#define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
 #define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
 #define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
 #define   MMCRA_SLOT_SHIFT	24
 #define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define   POWER6_MMCRA_SDSYNC 0x0000080000000000ULL	/* SDAR/SIAR synced */
 #define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
 #define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
 #define   POWER6_MMCRA_THRM	0x00000020UL
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index 69f709d8e8e..3eb13be11d8 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -94,7 +94,7 @@ typedef struct {
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 struct old_sigaction {
 	__sighandler_t sa_handler;
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index d98a30dfd41..a0b92de51c7 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -322,6 +322,6 @@ SYSCALL_SPU(epoll_create1)
 SYSCALL_SPU(dup3)
 SYSCALL_SPU(pipe2)
 SYSCALL(inotify_init1)
-SYSCALL(ni_syscall)
+SYSCALL_SPU(perf_counter_open)
 COMPAT_SYS_SPU(preadv)
 COMPAT_SYS_SPU(pwritev)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index f612798e1c9..2b2420a4988 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
 extern unsigned int rtas_data;
 extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
+extern phys_addr_t memory_limit;
 extern unsigned long klimit;
 
 extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h
index 2c14fea07c8..a24f48704a3 100644
--- a/arch/powerpc/include/asm/termios.h
+++ b/arch/powerpc/include/asm/termios.h
@@ -78,7 +78,7 @@ struct termio {
 
 #ifdef __KERNEL__
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 7ce27a52bb3..a5aea0ca34e 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -40,15 +40,6 @@ typedef struct {
 #endif /* __ASSEMBLY__ */
 
 #ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __powerpc64__
-#define BITS_PER_LONG 64
-#else
-#define BITS_PER_LONG 32
-#endif
-
 #ifndef __ASSEMBLY__
 
 typedef __vector128 vector128;
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 3f06f8ec81c..4badac2d11d 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -341,6 +341,7 @@
 #define __NR_dup3		316
 #define __NR_pipe2		317
 #define __NR_inotify_init1	318
+#define __NR_perf_counter_open	319
 #define __NR_preadv		320
 #define __NR_pwritev		321
 
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 71901fbda4a..a2c683403c2 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -94,6 +94,9 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
+obj-$(CONFIG_PERF_COUNTERS)	+= perf_counter.o power4-pmu.o ppc970-pmu.o \
+				   power5-pmu.o power5+-pmu.o power6-pmu.o \
+				   power7-pmu.o
 
 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 1e40bc05394..e981d1ce191 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -131,6 +131,7 @@ int main(void)
 	DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
+	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending));
 	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
 	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f9c40f869c6..3e33fb933d9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1836,7 +1836,7 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
 		 * and, in that case, keep the current value for
 		 * oprofile_cpu_type.
 		 */
-		if (old.oprofile_cpu_type == NULL) {
+		if (old.oprofile_cpu_type != NULL) {
 			t->oprofile_cpu_type = old.oprofile_cpu_type;
 			t->oprofile_type = old.oprofile_type;
 		}
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 53c7788cba7..6b02793dc75 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 {
 	void *ret;
 #ifdef CONFIG_NOT_COHERENT_CACHE
-	ret = __dma_alloc_coherent(size, dma_handle, flag);
+	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
 	if (ret == NULL)
 		return NULL;
 	*dma_handle += get_dma_direct_offset(dev);
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index abfc3233047..43e073477c3 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -526,6 +526,15 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
 
+#ifdef CONFIG_PERF_COUNTERS
+	/* check paca->perf_counter_pending if we're enabling ints */
+	lbz	r3,PACAPERFPEND(r13)
+	and.	r3,r3,r5
+	beq	27f
+	bl	.perf_counter_do_pending
+27:
+#endif /* CONFIG_PERF_COUNTERS */
+
 	/* extract EE bit and use it to restore paca->hard_enabled */
 	ld	r3,_MSR(r1)
 	rldicl	r4,r3,49,63		/* r0 = (r3 >> 15) & 1 */
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 70e2a736be1..2d182f119d1 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod,
 	 * 0xe8, 0x4c, 0x00, 0x28,    ld      r2,40(r12)
 	 */
 
-	pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+	pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
 
 	/* Find where the trampoline jumps to */
 	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x", jmp[0], jmp[1]);
 
 	/* verify that this is what we expect it to be */
 	if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
@@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod,
 	offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
 		(int)((short)jmp[1]);
 
-	pr_debug(" %x ", offset);
+	pr_devel(" %x ", offset);
 
 	/* get the address this jumps too */
 	tramp = mod->arch.toc + offset + 32;
-	pr_debug("toc: %lx", tramp);
+	pr_devel("toc: %lx", tramp);
 
 	if (probe_kernel_read(jmp, (void *)tramp, 8)) {
 		printk(KERN_ERR "Failed to read %lx\n", tramp);
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
 
 	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
 
@@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod,
 	 *  0x4e, 0x80, 0x04, 0x20  bctr
 	 */
 
-	pr_debug("ip:%lx jumps to %lx", ip, tramp);
+	pr_devel("ip:%lx jumps to %lx", ip, tramp);
 
 	/* Find where the trampoline jumps to */
 	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x ", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x ", jmp[0], jmp[1]);
 
 	/* verify that this is what we expect it to be */
 	if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
@@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod,
 	if (tramp & 0x8000)
 		tramp -= 0x10000;
 
-	pr_debug(" %lx ", tramp);
+	pr_devel(" %lx ", tramp);
 
 	if (tramp != addr) {
 		printk(KERN_ERR
@@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	/* ld r2,40(r1) */
 	op[1] = 0xe8410028;
 
-	pr_debug("write to %lx\n", rec->ip);
+	pr_devel("write to %lx\n", rec->ip);
 
 	if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
 		return -EPERM;
@@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 		return -EINVAL;
 	}
 
-	pr_debug("write to %lx\n", rec->ip);
+	pr_devel("write to %lx\n", rec->ip);
 
 	if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
 		return -EPERM;
@@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 			PPC_LONG "2b,4b\n"
 		".previous"
 
-		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [old] "=&r" (old), [faulted] "=r" (faulted)
 		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 8c1a4966867..844d3f882a1 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -53,6 +53,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
+#include <linux/perf_counter.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -135,6 +136,11 @@ notrace void raw_local_irq_restore(unsigned long en)
 			iseries_handle_interrupts();
 	}
 
+	if (test_perf_counter_pending()) {
+		clear_perf_counter_pending();
+		perf_counter_do_pending();
+	}
+
 	/*
 	 * if (get_paca()->hard_enabled) return;
 	 * But again we need to take care that gcc gets hard_enabled directly
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index d59e2b1bdcb..bb3d893a835 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -125,8 +125,8 @@ void __init reserve_crashkernel(void)
 	/* Crash kernel trumps memory limit */
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
-		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
-				memory_limit);
+		printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
+		       (unsigned long long)memory_limit);
 	}
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 43e7e3a7f13..477c663e014 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -43,8 +43,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 9c69e7e145c..4fee63cb53f 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass)
 
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < 6; idx++) {
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
 			r = &dev->resource[idx];
 			if (r->parent)		/* Already allocated */
 				continue;
 			if (!r->flags || (r->flags & IORESOURCE_UNSET))
 				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE )
+				disabled = 1;
 			if (r->flags & IORESOURCE_IO)
 				disabled = !(command & PCI_COMMAND_IO);
 			else
@@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass)
 		if (pass)
 			continue;
 		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags & IORESOURCE_ROM_ENABLE) {
+		if (r->flags) {
 			/* Turn the ROM off, leave the resource region,
 			 * but keep it unregistered.
 			 */
 			u32 reg;
-			pr_debug("PCI: Switching off ROM of %s\n",
-				 pci_name(dev));
-			r->flags &= ~IORESOURCE_ROM_ENABLE;
 			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			pci_write_config_dword(dev, dev->rom_base_reg,
-					       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
 		}
 	}
 }
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index be574fc0d92..96edb6f8bab 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 	return def;
 }
 
-static unsigned int pci_parse_of_flags(u32 addr0)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
 {
 	unsigned int flags = 0;
 
@@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0)
 		if (addr0 & 0x40000000)
 			flags |= IORESOURCE_PREFETCH
 				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+		/* Note: We don't know whether the ROM has been left enabled
+		 * by the firmware or not. We mark it as disabled (ie, we do
+		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+		 * do a config space read, it will be force-enabled if needed
+		 */
+		if (!bridge && (addr0 & 0xff) == 0x30)
+			flags |= IORESOURCE_READONLY;
 	} else if (addr0 & 0x01000000)
 		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	if (flags)
+		flags |= IORESOURCE_SIZEALIGN;
 	return flags;
 }
 
@@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
 		return;
 	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
 	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0]);
+		flags = pci_parse_of_flags(addrs[0], 0);
 		if (!flags)
 			continue;
 		base = of_read_number(&addrs[1], 2);
@@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
 	}
 	i = 1;
 	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0]);
+		flags = pci_parse_of_flags(ranges[0], 1);
 		size = of_read_number(&ranges[6], 2);
 		if (flags == 0 || size == 0)
 			continue;
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
new file mode 100644
index 00000000000..bb202388170
--- /dev/null
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -0,0 +1,1263 @@
+/*
+ * Performance counter support - powerpc architecture code
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_counter.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/reg.h>
+#include <asm/pmc.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+
+struct cpu_hw_counters {
+	int n_counters;
+	int n_percpu;
+	int disabled;
+	int n_added;
+	int n_limited;
+	u8  pmcs_enabled;
+	struct perf_counter *counter[MAX_HWCOUNTERS];
+	u64 events[MAX_HWCOUNTERS];
+	unsigned int flags[MAX_HWCOUNTERS];
+	u64 mmcr[3];
+	struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
+	u8  limited_hwidx[MAX_LIMITED_HWCOUNTERS];
+};
+DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
+
+struct power_pmu *ppmu;
+
+/*
+ * Normally, to ignore kernel events we set the FCS (freeze counters
+ * in supervisor mode) bit in MMCR0, but if the kernel runs with the
+ * hypervisor bit set in the MSR, or if we are running on a processor
+ * where the hypervisor bit is forced to 1 (as on Apple G5 processors),
+ * then we need to use the FCHV bit to ignore kernel events.
+ */
+static unsigned int freeze_counters_kernel = MMCR0_FCS;
+
+static void perf_counter_interrupt(struct pt_regs *regs);
+
+void perf_counter_print_debug(void)
+{
+}
+
+/*
+ * Read one performance monitor counter (PMC).
+ */
+static unsigned long read_pmc(int idx)
+{
+	unsigned long val;
+
+	switch (idx) {
+	case 1:
+		val = mfspr(SPRN_PMC1);
+		break;
+	case 2:
+		val = mfspr(SPRN_PMC2);
+		break;
+	case 3:
+		val = mfspr(SPRN_PMC3);
+		break;
+	case 4:
+		val = mfspr(SPRN_PMC4);
+		break;
+	case 5:
+		val = mfspr(SPRN_PMC5);
+		break;
+	case 6:
+		val = mfspr(SPRN_PMC6);
+		break;
+	case 7:
+		val = mfspr(SPRN_PMC7);
+		break;
+	case 8:
+		val = mfspr(SPRN_PMC8);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
+		val = 0;
+	}
+	return val;
+}
+
+/*
+ * Write one PMC.
+ */
+static void write_pmc(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 1:
+		mtspr(SPRN_PMC1, val);
+		break;
+	case 2:
+		mtspr(SPRN_PMC2, val);
+		break;
+	case 3:
+		mtspr(SPRN_PMC3, val);
+		break;
+	case 4:
+		mtspr(SPRN_PMC4, val);
+		break;
+	case 5:
+		mtspr(SPRN_PMC5, val);
+		break;
+	case 6:
+		mtspr(SPRN_PMC6, val);
+		break;
+	case 7:
+		mtspr(SPRN_PMC7, val);
+		break;
+	case 8:
+		mtspr(SPRN_PMC8, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
+	}
+}
+
+/*
+ * Check if a set of events can all go on the PMU at once.
+ * If they can't, this will look at alternative codes for the events
+ * and see if any combination of alternative codes is feasible.
+ * The feasible set is returned in event[].
+ */
+static int power_check_constraints(u64 event[], unsigned int cflags[],
+				   int n_ev)
+{
+	u64 mask, value, nv;
+	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	u64 amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	u64 avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	u64 smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
+	int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
+	int i, j;
+	u64 addf = ppmu->add_fields;
+	u64 tadd = ppmu->test_adder;
+
+	if (n_ev > ppmu->n_counter)
+		return -1;
+
+	/* First see if the events will go on as-is */
+	for (i = 0; i < n_ev; ++i) {
+		if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
+		    && !ppmu->limited_pmc_event(event[i])) {
+			ppmu->get_alternatives(event[i], cflags[i],
+					       alternatives[i]);
+			event[i] = alternatives[i][0];
+		}
+		if (ppmu->get_constraint(event[i], &amasks[i][0],
+					 &avalues[i][0]))
+			return -1;
+	}
+	value = mask = 0;
+	for (i = 0; i < n_ev; ++i) {
+		nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf);
+		if ((((nv + tadd) ^ value) & mask) != 0 ||
+		    (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0)
+			break;
+		value = nv;
+		mask |= amasks[i][0];
+	}
+	if (i == n_ev)
+		return 0;	/* all OK */
+
+	/* doesn't work, gather alternatives... */
+	if (!ppmu->get_alternatives)
+		return -1;
+	for (i = 0; i < n_ev; ++i) {
+		choice[i] = 0;
+		n_alt[i] = ppmu->get_alternatives(event[i], cflags[i],
+						  alternatives[i]);
+		for (j = 1; j < n_alt[i]; ++j)
+			ppmu->get_constraint(alternatives[i][j],
+					     &amasks[i][j], &avalues[i][j]);
+	}
+
+	/* enumerate all possibilities and see if any will work */
+	i = 0;
+	j = -1;
+	value = mask = nv = 0;
+	while (i < n_ev) {
+		if (j >= 0) {
+			/* we're backtracking, restore context */
+			value = svalues[i];
+			mask = smasks[i];
+			j = choice[i];
+		}
+		/*
+		 * See if any alternative k for event i,
+		 * where k > j, will satisfy the constraints.
+		 */
+		while (++j < n_alt[i]) {
+			nv = (value | avalues[i][j]) +
+				(value & avalues[i][j] & addf);
+			if ((((nv + tadd) ^ value) & mask) == 0 &&
+			    (((nv + tadd) ^ avalues[i][j])
+			     & amasks[i][j]) == 0)
+				break;
+		}
+		if (j >= n_alt[i]) {
+			/*
+			 * No feasible alternative, backtrack
+			 * to event i-1 and continue enumerating its
+			 * alternatives from where we got up to.
+			 */
+			if (--i < 0)
+				return -1;
+		} else {
+			/*
+			 * Found a feasible alternative for event i,
+			 * remember where we got up to with this event,
+			 * go on to the next event, and start with
+			 * the first alternative for it.
+			 */
+			choice[i] = j;
+			svalues[i] = value;
+			smasks[i] = mask;
+			value = nv;
+			mask |= amasks[i][j];
+			++i;
+			j = -1;
+		}
+	}
+
+	/* OK, we have a feasible combination, tell the caller the solution */
+	for (i = 0; i < n_ev; ++i)
+		event[i] = alternatives[i][choice[i]];
+	return 0;
+}
+
+/*
+ * Check if newly-added counters have consistent settings for
+ * exclude_{user,kernel,hv} with each other and any previously
+ * added counters.
+ */
+static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[],
+			  int n_prev, int n_new)
+{
+	int eu = 0, ek = 0, eh = 0;
+	int i, n, first;
+	struct perf_counter *counter;
+
+	n = n_prev + n_new;
+	if (n <= 1)
+		return 0;
+
+	first = 1;
+	for (i = 0; i < n; ++i) {
+		if (cflags[i] & PPMU_LIMITED_PMC_OK) {
+			cflags[i] &= ~PPMU_LIMITED_PMC_REQD;
+			continue;
+		}
+		counter = ctrs[i];
+		if (first) {
+			eu = counter->attr.exclude_user;
+			ek = counter->attr.exclude_kernel;
+			eh = counter->attr.exclude_hv;
+			first = 0;
+		} else if (counter->attr.exclude_user != eu ||
+			   counter->attr.exclude_kernel != ek ||
+			   counter->attr.exclude_hv != eh) {
+			return -EAGAIN;
+		}
+	}
+
+	if (eu || ek || eh)
+		for (i = 0; i < n; ++i)
+			if (cflags[i] & PPMU_LIMITED_PMC_OK)
+				cflags[i] |= PPMU_LIMITED_PMC_REQD;
+
+	return 0;
+}
+
+static void power_pmu_read(struct perf_counter *counter)
+{
+	long val, delta, prev;
+
+	if (!counter->hw.idx)
+		return;
+	/*
+	 * Performance monitor interrupts come even when interrupts
+	 * are soft-disabled, as long as interrupts are hard-enabled.
+	 * Therefore we treat them like NMIs.
+	 */
+	do {
+		prev = atomic64_read(&counter->hw.prev_count);
+		barrier();
+		val = read_pmc(counter->hw.idx);
+	} while (atomic64_cmpxchg(&counter->hw.prev_count, prev, val) != prev);
+
+	/* The counters are only 32 bits wide */
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &counter->count);
+	atomic64_sub(delta, &counter->hw.period_left);
+}
+
+/*
+ * On some machines, PMC5 and PMC6 can't be written, don't respect
+ * the freeze conditions, and don't generate interrupts.  This tells
+ * us if `counter' is using such a PMC.
+ */
+static int is_limited_pmc(int pmcnum)
+{
+	return (ppmu->flags & PPMU_LIMITED_PMC5_6)
+		&& (pmcnum == 5 || pmcnum == 6);
+}
+
+static void freeze_limited_counters(struct cpu_hw_counters *cpuhw,
+				    unsigned long pmc5, unsigned long pmc6)
+{
+	struct perf_counter *counter;
+	u64 val, prev, delta;
+	int i;
+
+	for (i = 0; i < cpuhw->n_limited; ++i) {
+		counter = cpuhw->limited_counter[i];
+		if (!counter->hw.idx)
+			continue;
+		val = (counter->hw.idx == 5) ? pmc5 : pmc6;
+		prev = atomic64_read(&counter->hw.prev_count);
+		counter->hw.idx = 0;
+		delta = (val - prev) & 0xfffffffful;
+		atomic64_add(delta, &counter->count);
+	}
+}
+
+static void thaw_limited_counters(struct cpu_hw_counters *cpuhw,
+				  unsigned long pmc5, unsigned long pmc6)
+{
+	struct perf_counter *counter;
+	u64 val;
+	int i;
+
+	for (i = 0; i < cpuhw->n_limited; ++i) {
+		counter = cpuhw->limited_counter[i];
+		counter->hw.idx = cpuhw->limited_hwidx[i];
+		val = (counter->hw.idx == 5) ? pmc5 : pmc6;
+		atomic64_set(&counter->hw.prev_count, val);
+		perf_counter_update_userpage(counter);
+	}
+}
+
+/*
+ * Since limited counters don't respect the freeze conditions, we
+ * have to read them immediately after freezing or unfreezing the
+ * other counters.  We try to keep the values from the limited
+ * counters as consistent as possible by keeping the delay (in
+ * cycles and instructions) between freezing/unfreezing and reading
+ * the limited counters as small and consistent as possible.
+ * Therefore, if any limited counters are in use, we read them
+ * both, and always in the same order, to minimize variability,
+ * and do it inside the same asm that writes MMCR0.
+ */
+static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0)
+{
+	unsigned long pmc5, pmc6;
+
+	if (!cpuhw->n_limited) {
+		mtspr(SPRN_MMCR0, mmcr0);
+		return;
+	}
+
+	/*
+	 * Write MMCR0, then read PMC5 and PMC6 immediately.
+	 * To ensure we don't get a performance monitor interrupt
+	 * between writing MMCR0 and freezing/thawing the limited
+	 * counters, we first write MMCR0 with the counter overflow
+	 * interrupt enable bits turned off.
+	 */
+	asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5"
+		     : "=&r" (pmc5), "=&r" (pmc6)
+		     : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)),
+		       "i" (SPRN_MMCR0),
+		       "i" (SPRN_PMC5), "i" (SPRN_PMC6));
+
+	if (mmcr0 & MMCR0_FC)
+		freeze_limited_counters(cpuhw, pmc5, pmc6);
+	else
+		thaw_limited_counters(cpuhw, pmc5, pmc6);
+
+	/*
+	 * Write the full MMCR0 including the counter overflow interrupt
+	 * enable bits, if necessary.
+	 */
+	if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE))
+		mtspr(SPRN_MMCR0, mmcr0);
+}
+
+/*
+ * Disable all counters to prevent PMU interrupts and to allow
+ * counters to be added or removed.
+ */
+void hw_perf_disable(void)
+{
+	struct cpu_hw_counters *cpuhw;
+	unsigned long ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_counters);
+
+	ret = cpuhw->disabled;
+	if (!ret) {
+		cpuhw->disabled = 1;
+		cpuhw->n_added = 0;
+
+		/*
+		 * Check if we ever enabled the PMU on this cpu.
+		 */
+		if (!cpuhw->pmcs_enabled) {
+			if (ppc_md.enable_pmcs)
+				ppc_md.enable_pmcs();
+			cpuhw->pmcs_enabled = 1;
+		}
+
+		/*
+		 * Disable instruction sampling if it was enabled
+		 */
+		if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+			mtspr(SPRN_MMCRA,
+			      cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+			mb();
+		}
+
+		/*
+		 * Set the 'freeze counters' bit.
+		 * The barrier is to make sure the mtspr has been
+		 * executed and the PMU has frozen the counters
+		 * before we return.
+		 */
+		write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC);
+		mb();
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable all counters if disable == 0.
+ * If we were previously disabled and counters were added, then
+ * put the new config on the PMU.
+ */
+void hw_perf_enable(void)
+{
+	struct perf_counter *counter;
+	struct cpu_hw_counters *cpuhw;
+	unsigned long flags;
+	long i;
+	unsigned long val;
+	s64 left;
+	unsigned int hwc_index[MAX_HWCOUNTERS];
+	int n_lim;
+	int idx;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_counters);
+	if (!cpuhw->disabled) {
+		local_irq_restore(flags);
+		return;
+	}
+	cpuhw->disabled = 0;
+
+	/*
+	 * If we didn't change anything, or only removed counters,
+	 * no need to recalculate MMCR* settings and reset the PMCs.
+	 * Just reenable the PMU with the current MMCR* settings
+	 * (possibly updated for removal of counters).
+	 */
+	if (!cpuhw->n_added) {
+		mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+		mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+		if (cpuhw->n_counters == 0)
+			get_lppaca()->pmcregs_in_use = 0;
+		goto out_enable;
+	}
+
+	/*
+	 * Compute MMCR* values for the new set of counters
+	 */
+	if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_counters, hwc_index,
+			       cpuhw->mmcr)) {
+		/* shouldn't ever get here */
+		printk(KERN_ERR "oops compute_mmcr failed\n");
+		goto out;
+	}
+
+	/*
+	 * Add in MMCR0 freeze bits corresponding to the
+	 * attr.exclude_* bits for the first counter.
+	 * We have already checked that all counters have the
+	 * same values for these bits as the first counter.
+	 */
+	counter = cpuhw->counter[0];
+	if (counter->attr.exclude_user)
+		cpuhw->mmcr[0] |= MMCR0_FCP;
+	if (counter->attr.exclude_kernel)
+		cpuhw->mmcr[0] |= freeze_counters_kernel;
+	if (counter->attr.exclude_hv)
+		cpuhw->mmcr[0] |= MMCR0_FCHV;
+
+	/*
+	 * Write the new configuration to MMCR* with the freeze
+	 * bit set and set the hardware counters to their initial values.
+	 * Then unfreeze the counters.
+	 */
+	get_lppaca()->pmcregs_in_use = 1;
+	mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+	mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+	mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
+				| MMCR0_FC);
+
+	/*
+	 * Read off any pre-existing counters that need to move
+	 * to another PMC.
+	 */
+	for (i = 0; i < cpuhw->n_counters; ++i) {
+		counter = cpuhw->counter[i];
+		if (counter->hw.idx && counter->hw.idx != hwc_index[i] + 1) {
+			power_pmu_read(counter);
+			write_pmc(counter->hw.idx, 0);
+			counter->hw.idx = 0;
+		}
+	}
+
+	/*
+	 * Initialize the PMCs for all the new and moved counters.
+	 */
+	cpuhw->n_limited = n_lim = 0;
+	for (i = 0; i < cpuhw->n_counters; ++i) {
+		counter = cpuhw->counter[i];
+		if (counter->hw.idx)
+			continue;
+		idx = hwc_index[i] + 1;
+		if (is_limited_pmc(idx)) {
+			cpuhw->limited_counter[n_lim] = counter;
+			cpuhw->limited_hwidx[n_lim] = idx;
+			++n_lim;
+			continue;
+		}
+		val = 0;
+		if (counter->hw.sample_period) {
+			left = atomic64_read(&counter->hw.period_left);
+			if (left < 0x80000000L)
+				val = 0x80000000L - left;
+		}
+		atomic64_set(&counter->hw.prev_count, val);
+		counter->hw.idx = idx;
+		write_pmc(idx, val);
+		perf_counter_update_userpage(counter);
+	}
+	cpuhw->n_limited = n_lim;
+	cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE;
+
+ out_enable:
+	mb();
+	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+
+	/*
+	 * Enable instruction sampling if necessary
+	 */
+	if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+		mb();
+		mtspr(SPRN_MMCRA, cpuhw->mmcr[2]);
+	}
+
+ out:
+	local_irq_restore(flags);
+}
+
+static int collect_events(struct perf_counter *group, int max_count,
+			  struct perf_counter *ctrs[], u64 *events,
+			  unsigned int *flags)
+{
+	int n = 0;
+	struct perf_counter *counter;
+
+	if (!is_software_counter(group)) {
+		if (n >= max_count)
+			return -1;
+		ctrs[n] = group;
+		flags[n] = group->hw.counter_base;
+		events[n++] = group->hw.config;
+	}
+	list_for_each_entry(counter, &group->sibling_list, list_entry) {
+		if (!is_software_counter(counter) &&
+		    counter->state != PERF_COUNTER_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			ctrs[n] = counter;
+			flags[n] = counter->hw.counter_base;
+			events[n++] = counter->hw.config;
+		}
+	}
+	return n;
+}
+
+static void counter_sched_in(struct perf_counter *counter, int cpu)
+{
+	counter->state = PERF_COUNTER_STATE_ACTIVE;
+	counter->oncpu = cpu;
+	counter->tstamp_running += counter->ctx->time - counter->tstamp_stopped;
+	if (is_software_counter(counter))
+		counter->pmu->enable(counter);
+}
+
+/*
+ * Called to enable a whole group of counters.
+ * Returns 1 if the group was enabled, or -EAGAIN if it could not be.
+ * Assumes the caller has disabled interrupts and has
+ * frozen the PMU with hw_perf_save_disable.
+ */
+int hw_perf_group_sched_in(struct perf_counter *group_leader,
+	       struct perf_cpu_context *cpuctx,
+	       struct perf_counter_context *ctx, int cpu)
+{
+	struct cpu_hw_counters *cpuhw;
+	long i, n, n0;
+	struct perf_counter *sub;
+
+	cpuhw = &__get_cpu_var(cpu_hw_counters);
+	n0 = cpuhw->n_counters;
+	n = collect_events(group_leader, ppmu->n_counter - n0,
+			   &cpuhw->counter[n0], &cpuhw->events[n0],
+			   &cpuhw->flags[n0]);
+	if (n < 0)
+		return -EAGAIN;
+	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n))
+		return -EAGAIN;
+	i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0);
+	if (i < 0)
+		return -EAGAIN;
+	cpuhw->n_counters = n0 + n;
+	cpuhw->n_added += n;
+
+	/*
+	 * OK, this group can go on; update counter states etc.,
+	 * and enable any software counters
+	 */
+	for (i = n0; i < n0 + n; ++i)
+		cpuhw->counter[i]->hw.config = cpuhw->events[i];
+	cpuctx->active_oncpu += n;
+	n = 1;
+	counter_sched_in(group_leader, cpu);
+	list_for_each_entry(sub, &group_leader->sibling_list, list_entry) {
+		if (sub->state != PERF_COUNTER_STATE_OFF) {
+			counter_sched_in(sub, cpu);
+			++n;
+		}
+	}
+	ctx->nr_active += n;
+
+	return 1;
+}
+
+/*
+ * Add a counter to the PMU.
+ * If all counters are not already frozen, then we disable and
+ * re-enable the PMU in order to get hw_perf_enable to do the
+ * actual work of reconfiguring the PMU.
+ */
+static int power_pmu_enable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuhw;
+	unsigned long flags;
+	int n0;
+	int ret = -EAGAIN;
+
+	local_irq_save(flags);
+	perf_disable();
+
+	/*
+	 * Add the counter to the list (if there is room)
+	 * and check whether the total set is still feasible.
+	 */
+	cpuhw = &__get_cpu_var(cpu_hw_counters);
+	n0 = cpuhw->n_counters;
+	if (n0 >= ppmu->n_counter)
+		goto out;
+	cpuhw->counter[n0] = counter;
+	cpuhw->events[n0] = counter->hw.config;
+	cpuhw->flags[n0] = counter->hw.counter_base;
+	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1))
+		goto out;
+	if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1))
+		goto out;
+
+	counter->hw.config = cpuhw->events[n0];
+	++cpuhw->n_counters;
+	++cpuhw->n_added;
+
+	ret = 0;
+ out:
+	perf_enable();
+	local_irq_restore(flags);
+	return ret;
+}
+
+/*
+ * Remove a counter from the PMU.
+ */
+static void power_pmu_disable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuhw;
+	long i;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	perf_disable();
+
+	power_pmu_read(counter);
+
+	cpuhw = &__get_cpu_var(cpu_hw_counters);
+	for (i = 0; i < cpuhw->n_counters; ++i) {
+		if (counter == cpuhw->counter[i]) {
+			while (++i < cpuhw->n_counters)
+				cpuhw->counter[i-1] = cpuhw->counter[i];
+			--cpuhw->n_counters;
+			ppmu->disable_pmc(counter->hw.idx - 1, cpuhw->mmcr);
+			if (counter->hw.idx) {
+				write_pmc(counter->hw.idx, 0);
+				counter->hw.idx = 0;
+			}
+			perf_counter_update_userpage(counter);
+			break;
+		}
+	}
+	for (i = 0; i < cpuhw->n_limited; ++i)
+		if (counter == cpuhw->limited_counter[i])
+			break;
+	if (i < cpuhw->n_limited) {
+		while (++i < cpuhw->n_limited) {
+			cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i];
+			cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i];
+		}
+		--cpuhw->n_limited;
+	}
+	if (cpuhw->n_counters == 0) {
+		/* disable exceptions if no counters are running */
+		cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE);
+	}
+
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable interrupts on a counter after they were throttled
+ * because they were coming too fast.
+ */
+static void power_pmu_unthrottle(struct perf_counter *counter)
+{
+	s64 val, left;
+	unsigned long flags;
+
+	if (!counter->hw.idx || !counter->hw.sample_period)
+		return;
+	local_irq_save(flags);
+	perf_disable();
+	power_pmu_read(counter);
+	left = counter->hw.sample_period;
+	counter->hw.last_period = left;
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(counter->hw.idx, val);
+	atomic64_set(&counter->hw.prev_count, val);
+	atomic64_set(&counter->hw.period_left, left);
+	perf_counter_update_userpage(counter);
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+struct pmu power_pmu = {
+	.enable		= power_pmu_enable,
+	.disable	= power_pmu_disable,
+	.read		= power_pmu_read,
+	.unthrottle	= power_pmu_unthrottle,
+};
+
+/*
+ * Return 1 if we might be able to put counter on a limited PMC,
+ * or 0 if not.
+ * A counter can only go on a limited PMC if it counts something
+ * that a limited PMC can count, doesn't require interrupts, and
+ * doesn't exclude any processor mode.
+ */
+static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev,
+				 unsigned int flags)
+{
+	int n;
+	u64 alt[MAX_EVENT_ALTERNATIVES];
+
+	if (counter->attr.exclude_user
+	    || counter->attr.exclude_kernel
+	    || counter->attr.exclude_hv
+	    || counter->attr.sample_period)
+		return 0;
+
+	if (ppmu->limited_pmc_event(ev))
+		return 1;
+
+	/*
+	 * The requested event isn't on a limited PMC already;
+	 * see if any alternative code goes on a limited PMC.
+	 */
+	if (!ppmu->get_alternatives)
+		return 0;
+
+	flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD;
+	n = ppmu->get_alternatives(ev, flags, alt);
+
+	return n > 0;
+}
+
+/*
+ * Find an alternative event that goes on a normal PMC, if possible,
+ * and return the event code, or 0 if there is no such alternative.
+ * (Note: event code 0 is "don't count" on all machines.)
+ */
+static u64 normal_pmc_alternative(u64 ev, unsigned long flags)
+{
+	u64 alt[MAX_EVENT_ALTERNATIVES];
+	int n;
+
+	flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD);
+	n = ppmu->get_alternatives(ev, flags, alt);
+	if (!n)
+		return 0;
+	return alt[0];
+}
+
+/* Number of perf_counters counting hardware events */
+static atomic_t num_counters;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * Release the PMU if this is the last perf_counter.
+ */
+static void hw_perf_counter_destroy(struct perf_counter *counter)
+{
+	if (!atomic_add_unless(&num_counters, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_counters) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+/*
+ * Translate a generic cache event config to a raw event code.
+ */
+static int hw_perf_cache_event(u64 config, u64 *eventp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!ppmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*ppmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*eventp = ev;
+	return 0;
+}
+
+const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
+{
+	u64 ev;
+	unsigned long flags;
+	struct perf_counter *ctrs[MAX_HWCOUNTERS];
+	u64 events[MAX_HWCOUNTERS];
+	unsigned int cflags[MAX_HWCOUNTERS];
+	int n;
+	int err;
+
+	if (!ppmu)
+		return ERR_PTR(-ENXIO);
+	switch (counter->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		ev = counter->attr.config;
+		if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
+			return ERR_PTR(-EOPNOTSUPP);
+		ev = ppmu->generic_events[ev];
+		break;
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(counter->attr.config, &ev);
+		if (err)
+			return ERR_PTR(err);
+		break;
+	case PERF_TYPE_RAW:
+		ev = counter->attr.config;
+		break;
+	}
+	counter->hw.config_base = ev;
+	counter->hw.idx = 0;
+
+	/*
+	 * If we are not running on a hypervisor, force the
+	 * exclude_hv bit to 0 so that we don't care what
+	 * the user set it to.
+	 */
+	if (!firmware_has_feature(FW_FEATURE_LPAR))
+		counter->attr.exclude_hv = 0;
+
+	/*
+	 * If this is a per-task counter, then we can use
+	 * PM_RUN_* events interchangeably with their non RUN_*
+	 * equivalents, e.g. PM_RUN_CYC instead of PM_CYC.
+	 * XXX we should check if the task is an idle task.
+	 */
+	flags = 0;
+	if (counter->ctx->task)
+		flags |= PPMU_ONLY_COUNT_RUN;
+
+	/*
+	 * If this machine has limited counters, check whether this
+	 * event could go on a limited counter.
+	 */
+	if (ppmu->flags & PPMU_LIMITED_PMC5_6) {
+		if (can_go_on_limited_pmc(counter, ev, flags)) {
+			flags |= PPMU_LIMITED_PMC_OK;
+		} else if (ppmu->limited_pmc_event(ev)) {
+			/*
+			 * The requested event is on a limited PMC,
+			 * but we can't use a limited PMC; see if any
+			 * alternative goes on a normal PMC.
+			 */
+			ev = normal_pmc_alternative(ev, flags);
+			if (!ev)
+				return ERR_PTR(-EINVAL);
+		}
+	}
+
+	/*
+	 * If this is in a group, check if it can go on with all the
+	 * other hardware counters in the group.  We assume the counter
+	 * hasn't been linked into its leader's sibling list at this point.
+	 */
+	n = 0;
+	if (counter->group_leader != counter) {
+		n = collect_events(counter->group_leader, ppmu->n_counter - 1,
+				   ctrs, events, cflags);
+		if (n < 0)
+			return ERR_PTR(-EINVAL);
+	}
+	events[n] = ev;
+	ctrs[n] = counter;
+	cflags[n] = flags;
+	if (check_excludes(ctrs, cflags, n, 1))
+		return ERR_PTR(-EINVAL);
+	if (power_check_constraints(events, cflags, n + 1))
+		return ERR_PTR(-EINVAL);
+
+	counter->hw.config = events[n];
+	counter->hw.counter_base = cflags[n];
+	counter->hw.last_period = counter->hw.sample_period;
+	atomic64_set(&counter->hw.period_left, counter->hw.last_period);
+
+	/*
+	 * See if we need to reserve the PMU.
+	 * If no counters are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_counters)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_counters) == 0 &&
+		    reserve_pmc_hardware(perf_counter_interrupt))
+			err = -EBUSY;
+		else
+			atomic_inc(&num_counters);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+	counter->destroy = hw_perf_counter_destroy;
+
+	if (err)
+		return ERR_PTR(err);
+	return &power_pmu;
+}
+
+/*
+ * A counter has overflowed; update its count and record
+ * things if requested.  Note that interrupts are hard-disabled
+ * here so there is no possibility of being interrupted.
+ */
+static void record_and_restart(struct perf_counter *counter, long val,
+			       struct pt_regs *regs, int nmi)
+{
+	u64 period = counter->hw.sample_period;
+	s64 prev, delta, left;
+	int record = 0;
+	u64 addr, mmcra, sdsync;
+
+	/* we don't have to worry about interrupts here */
+	prev = atomic64_read(&counter->hw.prev_count);
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &counter->count);
+
+	/*
+	 * See if the total period for this counter has expired,
+	 * and update for the next period.
+	 */
+	val = 0;
+	left = atomic64_read(&counter->hw.period_left) - delta;
+	if (period) {
+		if (left <= 0) {
+			left += period;
+			if (left <= 0)
+				left = period;
+			record = 1;
+		}
+		if (left < 0x80000000L)
+			val = 0x80000000L - left;
+	}
+
+	/*
+	 * Finally record data if requested.
+	 */
+	if (record) {
+		struct perf_sample_data data = {
+			.regs	= regs,
+			.addr	= 0,
+			.period	= counter->hw.last_period,
+		};
+
+		if (counter->attr.sample_type & PERF_SAMPLE_ADDR) {
+			/*
+			 * The user wants a data address recorded.
+			 * If we're not doing instruction sampling,
+			 * give them the SDAR (sampled data address).
+			 * If we are doing instruction sampling, then only
+			 * give them the SDAR if it corresponds to the
+			 * instruction pointed to by SIAR; this is indicated
+			 * by the [POWER6_]MMCRA_SDSYNC bit in MMCRA.
+			 */
+			mmcra = regs->dsisr;
+			sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
+				POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+			if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
+				data.addr = mfspr(SPRN_SDAR);
+		}
+		if (perf_counter_overflow(counter, nmi, &data)) {
+			/*
+			 * Interrupts are coming too fast - throttle them
+			 * by setting the counter to 0, so it will be
+			 * at least 2^30 cycles until the next interrupt
+			 * (assuming each counter counts at most 2 counts
+			 * per cycle).
+			 */
+			val = 0;
+			left = ~0ULL >> 1;
+		}
+	}
+
+	write_pmc(counter->hw.idx, val);
+	atomic64_set(&counter->hw.prev_count, val);
+	atomic64_set(&counter->hw.period_left, left);
+	perf_counter_update_userpage(counter);
+}
+
+/*
+ * Called from generic code to get the misc flags (i.e. processor mode)
+ * for an event.
+ */
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+	unsigned long mmcra;
+
+	if (TRAP(regs) != 0xf00) {
+		/* not a PMU interrupt */
+		return user_mode(regs) ? PERF_EVENT_MISC_USER :
+			PERF_EVENT_MISC_KERNEL;
+	}
+
+	mmcra = regs->dsisr;
+	if (ppmu->flags & PPMU_ALT_SIPR) {
+		if (mmcra & POWER6_MMCRA_SIHV)
+			return PERF_EVENT_MISC_HYPERVISOR;
+		return (mmcra & POWER6_MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
+			PERF_EVENT_MISC_KERNEL;
+	}
+	if (mmcra & MMCRA_SIHV)
+		return PERF_EVENT_MISC_HYPERVISOR;
+	return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
+			PERF_EVENT_MISC_KERNEL;
+}
+
+/*
+ * Called from generic code to get the instruction pointer
+ * for an event.
+ */
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
+	unsigned long mmcra;
+	unsigned long ip;
+	unsigned long slot;
+
+	if (TRAP(regs) != 0xf00)
+		return regs->nip;	/* not a PMU interrupt */
+
+	ip = mfspr(SPRN_SIAR);
+	mmcra = regs->dsisr;
+	if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
+		slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
+		if (slot > 1)
+			ip += 4 * (slot - 1);
+	}
+	return ip;
+}
+
+/*
+ * Performance monitor interrupt stuff
+ */
+static void perf_counter_interrupt(struct pt_regs *regs)
+{
+	int i;
+	struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters);
+	struct perf_counter *counter;
+	long val;
+	int found = 0;
+	int nmi;
+
+	if (cpuhw->n_limited)
+		freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
+					mfspr(SPRN_PMC6));
+
+	/*
+	 * Overload regs->dsisr to store MMCRA so we only need to read it once.
+	 */
+	regs->dsisr = mfspr(SPRN_MMCRA);
+
+	/*
+	 * If interrupts were soft-disabled when this PMU interrupt
+	 * occurred, treat it as an NMI.
+	 */
+	nmi = !regs->softe;
+	if (nmi)
+		nmi_enter();
+	else
+		irq_enter();
+
+	for (i = 0; i < cpuhw->n_counters; ++i) {
+		counter = cpuhw->counter[i];
+		if (!counter->hw.idx || is_limited_pmc(counter->hw.idx))
+			continue;
+		val = read_pmc(counter->hw.idx);
+		if ((int)val < 0) {
+			/* counter has overflowed */
+			found = 1;
+			record_and_restart(counter, val, regs, nmi);
+		}
+	}
+
+	/*
+	 * In case we didn't find and reset the counter that caused
+	 * the interrupt, scan all counters and reset any that are
+	 * negative, to avoid getting continual interrupts.
+	 * Any that we processed in the previous loop will not be negative.
+	 */
+	if (!found) {
+		for (i = 0; i < ppmu->n_counter; ++i) {
+			if (is_limited_pmc(i + 1))
+				continue;
+			val = read_pmc(i + 1);
+			if ((int)val < 0)
+				write_pmc(i + 1, 0);
+		}
+	}
+
+	/*
+	 * Reset MMCR0 to its normal value.  This will set PMXE and
+	 * clear FC (freeze counters) and PMAO (perf mon alert occurred)
+	 * and thus allow interrupts to occur again.
+	 * XXX might want to use MSR.PM to keep the counters frozen until
+	 * we get back out of this interrupt.
+	 */
+	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+
+	if (nmi)
+		nmi_exit();
+	else
+		irq_exit();
+}
+
+void hw_perf_counter_setup(int cpu)
+{
+	struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu);
+
+	memset(cpuhw, 0, sizeof(*cpuhw));
+	cpuhw->mmcr[0] = MMCR0_FC;
+}
+
+extern struct power_pmu power4_pmu;
+extern struct power_pmu ppc970_pmu;
+extern struct power_pmu power5_pmu;
+extern struct power_pmu power5p_pmu;
+extern struct power_pmu power6_pmu;
+extern struct power_pmu power7_pmu;
+
+static int init_perf_counters(void)
+{
+	unsigned long pvr;
+
+	/* XXX should get this from cputable */
+	pvr = mfspr(SPRN_PVR);
+	switch (PVR_VER(pvr)) {
+	case PV_POWER4:
+	case PV_POWER4p:
+		ppmu = &power4_pmu;
+		break;
+	case PV_970:
+	case PV_970FX:
+	case PV_970MP:
+		ppmu = &ppc970_pmu;
+		break;
+	case PV_POWER5:
+		ppmu = &power5_pmu;
+		break;
+	case PV_POWER5p:
+		ppmu = &power5p_pmu;
+		break;
+	case 0x3e:
+		ppmu = &power6_pmu;
+		break;
+	case 0x3f:
+		ppmu = &power7_pmu;
+		break;
+	}
+
+	/*
+	 * Use FCHV to ignore kernel events if MSR.HV is set.
+	 */
+	if (mfmsr() & MSR_HV)
+		freeze_counters_kernel = MMCR0_FCHV;
+
+	return 0;
+}
+
+arch_initcall(init_perf_counters);
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
new file mode 100644
index 00000000000..07bd308a5fa
--- /dev/null
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -0,0 +1,598 @@
+/*
+ * Performance counter support for POWER4 (GP) and POWER4+ (GQ) processors.
+ *
+ * Copyright 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER4
+ */
+#define PM_PMC_SH	12	/* PMC number (1-based) for direct events */
+#define PM_PMC_MSK	0xf
+#define PM_UNIT_SH	8	/* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK	0xf
+#define PM_LOWER_SH	6
+#define PM_LOWER_MSK	1
+#define PM_LOWER_MSKS	0x40
+#define PM_BYTE_SH	4	/* Byte number of event bus to use */
+#define PM_BYTE_MSK	3
+#define PM_PMCSEL_MSK	7
+
+/*
+ * Unit code values
+ */
+#define PM_FPU		1
+#define PM_ISU1		2
+#define PM_IFU		3
+#define PM_IDU0		4
+#define PM_ISU1_ALT	6
+#define PM_ISU2		7
+#define PM_IFU_ALT	8
+#define PM_LSU0		9
+#define PM_LSU1		0xc
+#define PM_GPS		0xf
+
+/*
+ * Bits in MMCR0 for POWER4
+ */
+#define MMCR0_PMC1SEL_SH	8
+#define MMCR0_PMC2SEL_SH	1
+#define MMCR_PMCSEL_MSK		0x1f
+
+/*
+ * Bits in MMCR1 for POWER4
+ */
+#define MMCR1_TTM0SEL_SH	62
+#define MMCR1_TTC0SEL_SH	61
+#define MMCR1_TTM1SEL_SH	59
+#define MMCR1_TTC1SEL_SH	58
+#define MMCR1_TTM2SEL_SH	56
+#define MMCR1_TTC2SEL_SH	55
+#define MMCR1_TTM3SEL_SH	53
+#define MMCR1_TTC3SEL_SH	52
+#define MMCR1_TTMSEL_MSK	3
+#define MMCR1_TD_CP_DBG0SEL_SH	50
+#define MMCR1_TD_CP_DBG1SEL_SH	48
+#define MMCR1_TD_CP_DBG2SEL_SH	46
+#define MMCR1_TD_CP_DBG3SEL_SH	44
+#define MMCR1_DEBUG0SEL_SH	43
+#define MMCR1_DEBUG1SEL_SH	42
+#define MMCR1_DEBUG2SEL_SH	41
+#define MMCR1_DEBUG3SEL_SH	40
+#define MMCR1_PMC1_ADDER_SEL_SH	39
+#define MMCR1_PMC2_ADDER_SEL_SH	38
+#define MMCR1_PMC6_ADDER_SEL_SH	37
+#define MMCR1_PMC5_ADDER_SEL_SH	36
+#define MMCR1_PMC8_ADDER_SEL_SH	35
+#define MMCR1_PMC7_ADDER_SEL_SH	34
+#define MMCR1_PMC3_ADDER_SEL_SH	33
+#define MMCR1_PMC4_ADDER_SEL_SH	32
+#define MMCR1_PMC3SEL_SH	27
+#define MMCR1_PMC4SEL_SH	22
+#define MMCR1_PMC5SEL_SH	17
+#define MMCR1_PMC6SEL_SH	12
+#define MMCR1_PMC7SEL_SH	7
+#define MMCR1_PMC8SEL_SH	2	/* note bit 0 is in MMCRA for GP */
+
+static short mmcr1_adder_bits[8] = {
+	MMCR1_PMC1_ADDER_SEL_SH,
+	MMCR1_PMC2_ADDER_SEL_SH,
+	MMCR1_PMC3_ADDER_SEL_SH,
+	MMCR1_PMC4_ADDER_SEL_SH,
+	MMCR1_PMC5_ADDER_SEL_SH,
+	MMCR1_PMC6_ADDER_SEL_SH,
+	MMCR1_PMC7_ADDER_SEL_SH,
+	MMCR1_PMC8_ADDER_SEL_SH
+};
+
+/*
+ * Bits in MMCRA
+ */
+#define MMCRA_PMC8SEL0_SH	17	/* PMC8SEL bit 0 for GP */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ *        |[  >[  >[   >|||[  >[  ><  ><  ><  ><  ><><><><><><><><>
+ *        | UC1 UC2 UC3 ||| PS1 PS2 B0  B1  B2  B3 P1P2P3P4P5P6P7P8
+ * 	  \SMPL	        ||\TTC3SEL
+ * 		        |\TTC_IFU_SEL
+ * 		        \TTM2SEL0
+ *
+ * SMPL - SAMPLE_ENABLE constraint
+ *     56: SAMPLE_ENABLE value 0x0100_0000_0000_0000
+ *
+ * UC1 - unit constraint 1: can't have all three of FPU/ISU1/IDU0|ISU2
+ *     55: UC1 error 0x0080_0000_0000_0000
+ *     54: FPU events needed 0x0040_0000_0000_0000
+ *     53: ISU1 events needed 0x0020_0000_0000_0000
+ *     52: IDU0|ISU2 events needed 0x0010_0000_0000_0000
+ *
+ * UC2 - unit constraint 2: can't have all three of FPU/IFU/LSU0
+ *     51: UC2 error 0x0008_0000_0000_0000
+ *     50: FPU events needed 0x0004_0000_0000_0000
+ *     49: IFU events needed 0x0002_0000_0000_0000
+ *     48: LSU0 events needed 0x0001_0000_0000_0000
+ *
+ * UC3 - unit constraint 3: can't have all four of LSU0/IFU/IDU0|ISU2/ISU1
+ *     47: UC3 error 0x8000_0000_0000
+ *     46: LSU0 events needed 0x4000_0000_0000
+ *     45: IFU events needed 0x2000_0000_0000
+ *     44: IDU0|ISU2 events needed 0x1000_0000_0000
+ *     43: ISU1 events needed 0x0800_0000_0000
+ *
+ * TTM2SEL0
+ *     42: 0 = IDU0 events needed
+ *     	   1 = ISU2 events needed 0x0400_0000_0000
+ *
+ * TTC_IFU_SEL
+ *     41: 0 = IFU.U events needed
+ *     	   1 = IFU.L events needed 0x0200_0000_0000
+ *
+ * TTC3SEL
+ *     40: 0 = LSU1.U events needed
+ *     	   1 = LSU1.L events needed 0x0100_0000_0000
+ *
+ * PS1
+ *     39: PS1 error 0x0080_0000_0000
+ *     36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000
+ *
+ * PS2
+ *     35: PS2 error 0x0008_0000_0000
+ *     32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000
+ *
+ * B0
+ *     28-31: Byte 0 event source 0xf000_0000
+ *     	   1 = FPU
+ * 	   2 = ISU1
+ * 	   3 = IFU
+ * 	   4 = IDU0
+ * 	   7 = ISU2
+ * 	   9 = LSU0
+ * 	   c = LSU1
+ * 	   f = GPS
+ *
+ * B1, B2, B3
+ *     24-27, 20-23, 16-19: Byte 1, 2, 3 event sources
+ *
+ * P8
+ *     15: P8 error 0x8000
+ *     14-15: Count of events needing PMC8
+ *
+ * P1..P7
+ *     0-13: Count of events needing PMC1..PMC7
+ *
+ * Note: this doesn't allow events using IFU.U to be combined with events
+ * using IFU.L, though that is feasible (using TTM0 and TTM2).  However
+ * there are no listed events for IFU.L (they are debug events not
+ * verified for performance monitoring) so this shouldn't cause a
+ * problem.
+ */
+
+static struct unitinfo {
+	u64	value, mask;
+	int	unit;
+	int	lowerbit;
+} p4_unitinfo[16] = {
+	[PM_FPU]  = { 0x44000000000000ull, 0x88000000000000ull, PM_FPU, 0 },
+	[PM_ISU1] = { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 },
+	[PM_ISU1_ALT] =
+		    { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 },
+	[PM_IFU]  = { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 },
+	[PM_IFU_ALT] =
+		    { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 },
+	[PM_IDU0] = { 0x10100000000000ull, 0x80840000000000ull, PM_IDU0, 1 },
+	[PM_ISU2] = { 0x10140000000000ull, 0x80840000000000ull, PM_ISU2, 0 },
+	[PM_LSU0] = { 0x01400000000000ull, 0x08800000000000ull, PM_LSU0, 0 },
+	[PM_LSU1] = { 0x00000000000000ull, 0x00010000000000ull, PM_LSU1, 40 },
+	[PM_GPS]  = { 0x00000000000000ull, 0x00000000000000ull, PM_GPS, 0 }
+};
+
+static unsigned char direct_marked_event[8] = {
+	(1<<2) | (1<<3),	/* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */
+	(1<<3) | (1<<5),	/* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */
+	(1<<3),			/* PMC3: PM_MRK_ST_CMPL_INT */
+	(1<<4) | (1<<5),	/* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */
+	(1<<4) | (1<<5),	/* PMC5: PM_MRK_GRP_TIMEO */
+	(1<<3) | (1<<4) | (1<<5),
+		/* PMC6: PM_MRK_ST_GPS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */
+	(1<<4) | (1<<5),	/* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */
+	(1<<4),			/* PMC8: PM_MRK_LSU_FIN */
+};
+
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int p4_marked_instr_event(u64 event)
+{
+	int pmc, psel, unit, byte, bit;
+	unsigned int mask;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	psel = event & PM_PMCSEL_MSK;
+	if (pmc) {
+		if (direct_marked_event[pmc - 1] & (1 << psel))
+			return 1;
+		if (psel == 0)		/* add events */
+			bit = (pmc <= 4)? pmc - 1: 8 - pmc;
+		else if (psel == 6)	/* decode events */
+			bit = 4;
+		else
+			return 0;
+	} else
+		bit = psel;
+
+	byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	mask = 0;
+	switch (unit) {
+	case PM_LSU1:
+		if (event & PM_LOWER_MSKS)
+			mask = 1 << 28;		/* byte 7 bit 4 */
+		else
+			mask = 6 << 24;		/* byte 3 bits 1 and 2 */
+		break;
+	case PM_LSU0:
+		/* byte 3, bit 3; byte 2 bits 0,2,3,4,5; byte 1 */
+		mask = 0x083dff00;
+	}
+	return (mask >> (byte * 8 + bit)) & 1;
+}
+
+static int p4_get_constraint(u64 event, u64 *maskp, u64 *valp)
+{
+	int pmc, byte, unit, lower, sh;
+	u64 mask = 0, value = 0;
+	int grp = -1;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > 8)
+			return -1;
+		sh = (pmc - 1) * 2;
+		mask |= 2 << sh;
+		value |= 1 << sh;
+		grp = ((pmc - 1) >> 1) & 1;
+	}
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+	if (unit) {
+		lower = (event >> PM_LOWER_SH) & PM_LOWER_MSK;
+
+		/*
+		 * Bus events on bytes 0 and 2 can be counted
+		 * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8.
+		 */
+		if (!pmc)
+			grp = byte & 1;
+
+		if (!p4_unitinfo[unit].unit)
+			return -1;
+		mask  |= p4_unitinfo[unit].mask;
+		value |= p4_unitinfo[unit].value;
+		sh = p4_unitinfo[unit].lowerbit;
+		if (sh > 1)
+			value |= (u64)lower << sh;
+		else if (lower != sh)
+			return -1;
+		unit = p4_unitinfo[unit].unit;
+
+		/* Set byte lane select field */
+		mask  |= 0xfULL << (28 - 4 * byte);
+		value |= (u64)unit << (28 - 4 * byte);
+	}
+	if (grp == 0) {
+		/* increment PMC1/2/5/6 field */
+		mask  |= 0x8000000000ull;
+		value |= 0x1000000000ull;
+	} else {
+		/* increment PMC3/4/7/8 field */
+		mask  |= 0x800000000ull;
+		value |= 0x100000000ull;
+	}
+
+	/* Marked instruction events need sample_enable set */
+	if (p4_marked_instr_event(event)) {
+		mask  |= 1ull << 56;
+		value |= 1ull << 56;
+	}
+
+	/* PMCSEL=6 decode events on byte 2 need sample_enable clear */
+	if (pmc && (event & PM_PMCSEL_MSK) == 6 && byte == 2)
+		mask  |= 1ull << 56;
+
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+static unsigned int ppc_inst_cmpl[] = {
+	0x1001, 0x4001, 0x6001, 0x7001, 0x8001
+};
+
+static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	int i, j, na;
+
+	alt[0] = event;
+	na = 1;
+
+	/* 2 possibilities for PM_GRP_DISP_REJECT */
+	if (event == 0x8003 || event == 0x0224) {
+		alt[1] = event ^ (0x8003 ^ 0x0224);
+		return 2;
+	}
+
+	/* 2 possibilities for PM_ST_MISS_L1 */
+	if (event == 0x0c13 || event == 0x0c23) {
+		alt[1] = event ^ (0x0c13 ^ 0x0c23);
+		return 2;
+	}
+
+	/* several possibilities for PM_INST_CMPL */
+	for (i = 0; i < ARRAY_SIZE(ppc_inst_cmpl); ++i) {
+		if (event == ppc_inst_cmpl[i]) {
+			for (j = 0; j < ARRAY_SIZE(ppc_inst_cmpl); ++j)
+				if (j != i)
+					alt[na++] = ppc_inst_cmpl[j];
+			break;
+		}
+	}
+
+	return na;
+}
+
+static int p4_compute_mmcr(u64 event[], int n_ev,
+			   unsigned int hwc[], u64 mmcr[])
+{
+	u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0;
+	unsigned int pmc, unit, byte, psel, lower;
+	unsigned int ttm, grp;
+	unsigned int pmc_inuse = 0;
+	unsigned int pmc_grp_use[2];
+	unsigned char busbyte[4];
+	unsigned char unituse[16];
+	unsigned int unitlower = 0;
+	int i;
+
+	if (n_ev > 8)
+		return -1;
+
+	/* First pass to count resource use */
+	pmc_grp_use[0] = pmc_grp_use[1] = 0;
+	memset(busbyte, 0, sizeof(busbyte));
+	memset(unituse, 0, sizeof(unituse));
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			if (pmc_inuse & (1 << (pmc - 1)))
+				return -1;
+			pmc_inuse |= 1 << (pmc - 1);
+			/* count 1/2/5/6 vs 3/4/7/8 use */
+			++pmc_grp_use[((pmc - 1) >> 1) & 1];
+		}
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+		lower = (event[i] >> PM_LOWER_SH) & PM_LOWER_MSK;
+		if (unit) {
+			if (!pmc)
+				++pmc_grp_use[byte & 1];
+			if (unit == 6 || unit == 8)
+				/* map alt ISU1/IFU codes: 6->2, 8->3 */
+				unit = (unit >> 1) - 1;
+			if (busbyte[byte] && busbyte[byte] != unit)
+				return -1;
+			busbyte[byte] = unit;
+			lower <<= unit;
+			if (unituse[unit] && lower != (unitlower & lower))
+				return -1;
+			unituse[unit] = 1;
+			unitlower |= lower;
+		}
+	}
+	if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4)
+		return -1;
+
+	/*
+	 * Assign resources and set multiplexer selects.
+	 *
+	 * Units 1,2,3 are on TTM0, 4,6,7 on TTM1, 8,10 on TTM2.
+	 * Each TTMx can only select one unit, but since
+	 * units 2 and 6 are both ISU1, and 3 and 8 are both IFU,
+	 * we have some choices.
+	 */
+	if (unituse[2] & (unituse[1] | (unituse[3] & unituse[9]))) {
+		unituse[6] = 1;		/* Move 2 to 6 */
+		unituse[2] = 0;
+	}
+	if (unituse[3] & (unituse[1] | unituse[2])) {
+		unituse[8] = 1;		/* Move 3 to 8 */
+		unituse[3] = 0;
+		unitlower = (unitlower & ~8) | ((unitlower & 8) << 5);
+	}
+	/* Check only one unit per TTMx */
+	if (unituse[1] + unituse[2] + unituse[3] > 1 ||
+	    unituse[4] + unituse[6] + unituse[7] > 1 ||
+	    unituse[8] + unituse[9] > 1 ||
+	    (unituse[5] | unituse[10] | unituse[11] |
+	     unituse[13] | unituse[14]))
+		return -1;
+
+	/* Set TTMxSEL fields.  Note, units 1-3 => TTM0SEL codes 0-2 */
+	mmcr1 |= (u64)(unituse[3] * 2 + unituse[2]) << MMCR1_TTM0SEL_SH;
+	mmcr1 |= (u64)(unituse[7] * 3 + unituse[6] * 2) << MMCR1_TTM1SEL_SH;
+	mmcr1 |= (u64)unituse[9] << MMCR1_TTM2SEL_SH;
+
+	/* Set TTCxSEL fields. */
+	if (unitlower & 0xe)
+		mmcr1 |= 1ull << MMCR1_TTC0SEL_SH;
+	if (unitlower & 0xf0)
+		mmcr1 |= 1ull << MMCR1_TTC1SEL_SH;
+	if (unitlower & 0xf00)
+		mmcr1 |= 1ull << MMCR1_TTC2SEL_SH;
+	if (unitlower & 0x7000)
+		mmcr1 |= 1ull << MMCR1_TTC3SEL_SH;
+
+	/* Set byte lane select fields. */
+	for (byte = 0; byte < 4; ++byte) {
+		unit = busbyte[byte];
+		if (!unit)
+			continue;
+		if (unit == 0xf) {
+			/* special case for GPS */
+			mmcr1 |= 1ull << (MMCR1_DEBUG0SEL_SH - byte);
+		} else {
+			if (!unituse[unit])
+				ttm = unit - 1;		/* 2->1, 3->2 */
+			else
+				ttm = unit >> 2;
+			mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2*byte);
+		}
+	}
+
+	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+		psel = event[i] & PM_PMCSEL_MSK;
+		if (!pmc) {
+			/* Bus event or 00xxx direct event (off or cycles) */
+			if (unit)
+				psel |= 0x10 | ((byte & 2) << 2);
+			for (pmc = 0; pmc < 8; ++pmc) {
+				if (pmc_inuse & (1 << pmc))
+					continue;
+				grp = (pmc >> 1) & 1;
+				if (unit) {
+					if (grp == (byte & 1))
+						break;
+				} else if (pmc_grp_use[grp] < 4) {
+					++pmc_grp_use[grp];
+					break;
+				}
+			}
+			pmc_inuse |= 1 << pmc;
+		} else {
+			/* Direct event */
+			--pmc;
+			if (psel == 0 && (byte & 2))
+				/* add events on higher-numbered bus */
+				mmcr1 |= 1ull << mmcr1_adder_bits[pmc];
+			else if (psel == 6 && byte == 3)
+				/* seem to need to set sample_enable here */
+				mmcra |= MMCRA_SAMPLE_ENABLE;
+			psel |= 8;
+		}
+		if (pmc <= 1)
+			mmcr0 |= psel << (MMCR0_PMC1SEL_SH - 7 * pmc);
+		else
+			mmcr1 |= psel << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2));
+		if (pmc == 7)	/* PMC8 */
+			mmcra |= (psel & 1) << MMCRA_PMC8SEL0_SH;
+		hwc[i] = pmc;
+		if (p4_marked_instr_event(event[i]))
+			mmcra |= MMCRA_SAMPLE_ENABLE;
+	}
+
+	if (pmc_inuse & 1)
+		mmcr0 |= MMCR0_PMC1CE;
+	if (pmc_inuse & 0xfe)
+		mmcr0 |= MMCR0_PMCjCE;
+
+	mmcra |= 0x2000;	/* mark only one IOP per PPC instruction */
+
+	/* Return MMCRx values */
+	mmcr[0] = mmcr0;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcra;
+	return 0;
+}
+
+static void p4_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+	/*
+	 * Setting the PMCxSEL field to 0 disables PMC x.
+	 * (Note that pmc is 0-based here, not 1-based.)
+	 */
+	if (pmc <= 1) {
+		mmcr[0] &= ~(0x1fUL << (MMCR0_PMC1SEL_SH - 7 * pmc));
+	} else {
+		mmcr[1] &= ~(0x1fUL << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)));
+		if (pmc == 7)
+			mmcr[2] &= ~(1UL << MMCRA_PMC8SEL0_SH);
+	}
+}
+
+static int p4_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 7,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x1001,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x8c10, /* PM_LD_REF_L1 */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x3c10, /* PM_LD_MISS_L1 */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x330,  /* PM_BR_ISSUED */
+	[PERF_COUNT_HW_BRANCH_MISSES]		= 0x331,  /* PM_BR_MPRED_CR */
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x8c10,		0x3c10	},
+		[C(OP_WRITE)] = {	0x7c10,		0xc13	},
+		[C(OP_PREFETCH)] = {	0xc35,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0xc34,		0	},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x904	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x900	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x330,		0x331	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+struct power_pmu power4_pmu = {
+	.n_counter = 8,
+	.max_alternatives = 5,
+	.add_fields = 0x0000001100005555ull,
+	.test_adder = 0x0011083300000000ull,
+	.compute_mmcr = p4_compute_mmcr,
+	.get_constraint = p4_get_constraint,
+	.get_alternatives = p4_get_alternatives,
+	.disable_pmc = p4_disable_pmc,
+	.n_generic = ARRAY_SIZE(p4_generic_events),
+	.generic_events = p4_generic_events,
+	.cache_events = &power4_cache_events,
+};
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
new file mode 100644
index 00000000000..41e5d2d958d
--- /dev/null
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -0,0 +1,671 @@
+/*
+ * Performance counter support for POWER5+/++ (not POWER5) processors.
+ *
+ * Copyright 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3)
+ */
+#define PM_PMC_SH	20	/* PMC number (1-based) for direct events */
+#define PM_PMC_MSK	0xf
+#define PM_PMC_MSKS	(PM_PMC_MSK << PM_PMC_SH)
+#define PM_UNIT_SH	16	/* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK	0xf
+#define PM_BYTE_SH	12	/* Byte number of event bus to use */
+#define PM_BYTE_MSK	7
+#define PM_GRS_SH	8	/* Storage subsystem mux select */
+#define PM_GRS_MSK	7
+#define PM_BUSEVENT_MSK	0x80	/* Set if event uses event bus */
+#define PM_PMCSEL_MSK	0x7f
+
+/* Values in PM_UNIT field */
+#define PM_FPU		0
+#define PM_ISU0		1
+#define PM_IFU		2
+#define PM_ISU1		3
+#define PM_IDU		4
+#define PM_ISU0_ALT	6
+#define PM_GRS		7
+#define PM_LSU0		8
+#define PM_LSU1		0xc
+#define PM_LASTUNIT	0xc
+
+/*
+ * Bits in MMCR1 for POWER5+
+ */
+#define MMCR1_TTM0SEL_SH	62
+#define MMCR1_TTM1SEL_SH	60
+#define MMCR1_TTM2SEL_SH	58
+#define MMCR1_TTM3SEL_SH	56
+#define MMCR1_TTMSEL_MSK	3
+#define MMCR1_TD_CP_DBG0SEL_SH	54
+#define MMCR1_TD_CP_DBG1SEL_SH	52
+#define MMCR1_TD_CP_DBG2SEL_SH	50
+#define MMCR1_TD_CP_DBG3SEL_SH	48
+#define MMCR1_GRS_L2SEL_SH	46
+#define MMCR1_GRS_L2SEL_MSK	3
+#define MMCR1_GRS_L3SEL_SH	44
+#define MMCR1_GRS_L3SEL_MSK	3
+#define MMCR1_GRS_MCSEL_SH	41
+#define MMCR1_GRS_MCSEL_MSK	7
+#define MMCR1_GRS_FABSEL_SH	39
+#define MMCR1_GRS_FABSEL_MSK	3
+#define MMCR1_PMC1_ADDER_SEL_SH	35
+#define MMCR1_PMC2_ADDER_SEL_SH	34
+#define MMCR1_PMC3_ADDER_SEL_SH	33
+#define MMCR1_PMC4_ADDER_SEL_SH	32
+#define MMCR1_PMC1SEL_SH	25
+#define MMCR1_PMC2SEL_SH	17
+#define MMCR1_PMC3SEL_SH	9
+#define MMCR1_PMC4SEL_SH	1
+#define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
+#define MMCR1_PMCSEL_MSK	0x7f
+
+/*
+ * Bits in MMCRA
+ */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ *             [  ><><>< ><> <><>[  >  <  ><  ><  ><  ><><><><><><>
+ *             NC  G0G1G2 G3 T0T1 UC    B0  B1  B2  B3 P6P5P4P3P2P1
+ *
+ * NC - number of counters
+ *     51: NC error 0x0008_0000_0000_0000
+ *     48-50: number of events needing PMC1-4 0x0007_0000_0000_0000
+ *
+ * G0..G3 - GRS mux constraints
+ *     46-47: GRS_L2SEL value
+ *     44-45: GRS_L3SEL value
+ *     41-44: GRS_MCSEL value
+ *     39-40: GRS_FABSEL value
+ *	Note that these match up with their bit positions in MMCR1
+ *
+ * T0 - TTM0 constraint
+ *     36-37: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0x30_0000_0000
+ *
+ * T1 - TTM1 constraint
+ *     34-35: TTM1SEL value (0=IDU, 3=GRS) 0x0c_0000_0000
+ *
+ * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS
+ *     33: UC3 error 0x02_0000_0000
+ *     32: FPU|IFU|ISU1 events needed 0x01_0000_0000
+ *     31: ISU0 events needed 0x01_8000_0000
+ *     30: IDU|GRS events needed 0x00_4000_0000
+ *
+ * B0
+ *     24-27: Byte 0 event source 0x0f00_0000
+ *	      Encoding as for the event code
+ *
+ * B1, B2, B3
+ *     20-23, 16-19, 12-15: Byte 1, 2, 3 event sources
+ *
+ * P6
+ *     11: P6 error 0x800
+ *     10-11: Count of events needing PMC6
+ *
+ * P1..P5
+ *     0-9: Count of events needing PMC1..PMC5
+ */
+
+static const int grsel_shift[8] = {
+	MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH,
+	MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH,
+	MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH
+};
+
+/* Masks and values for using events from the various units */
+static u64 unit_cons[PM_LASTUNIT+1][2] = {
+	[PM_FPU] =   { 0x3200000000ull, 0x0100000000ull },
+	[PM_ISU0] =  { 0x0200000000ull, 0x0080000000ull },
+	[PM_ISU1] =  { 0x3200000000ull, 0x3100000000ull },
+	[PM_IFU] =   { 0x3200000000ull, 0x2100000000ull },
+	[PM_IDU] =   { 0x0e00000000ull, 0x0040000000ull },
+	[PM_GRS] =   { 0x0e00000000ull, 0x0c40000000ull },
+};
+
+static int power5p_get_constraint(u64 event, u64 *maskp, u64 *valp)
+{
+	int pmc, byte, unit, sh;
+	int bit, fmask;
+	u64 mask = 0, value = 0;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > 6)
+			return -1;
+		sh = (pmc - 1) * 2;
+		mask |= 2 << sh;
+		value |= 1 << sh;
+		if (pmc >= 5 && !(event == 0x500009 || event == 0x600005))
+			return -1;
+	}
+	if (event & PM_BUSEVENT_MSK) {
+		unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+		if (unit > PM_LASTUNIT)
+			return -1;
+		if (unit == PM_ISU0_ALT)
+			unit = PM_ISU0;
+		mask |= unit_cons[unit][0];
+		value |= unit_cons[unit][1];
+		byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+		if (byte >= 4) {
+			if (unit != PM_LSU1)
+				return -1;
+			/* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */
+			++unit;
+			byte &= 3;
+		}
+		if (unit == PM_GRS) {
+			bit = event & 7;
+			fmask = (bit == 6)? 7: 3;
+			sh = grsel_shift[bit];
+			mask |= (u64)fmask << sh;
+			value |= (u64)((event >> PM_GRS_SH) & fmask) << sh;
+		}
+		/* Set byte lane select field */
+		mask  |= 0xfULL << (24 - 4 * byte);
+		value |= (u64)unit << (24 - 4 * byte);
+	}
+	if (pmc < 5) {
+		/* need a counter from PMC1-4 set */
+		mask  |= 0x8000000000000ull;
+		value |= 0x1000000000000ull;
+	}
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+static int power5p_limited_pmc_event(u64 event)
+{
+	int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+
+	return pmc == 5 || pmc == 6;
+}
+
+#define MAX_ALT	3	/* at most 3 alternatives for any event */
+
+static const unsigned int event_alternatives[][MAX_ALT] = {
+	{ 0x100c0,  0x40001f },			/* PM_GCT_FULL_CYC */
+	{ 0x120e4,  0x400002 },			/* PM_GRP_DISP_REJECT */
+	{ 0x230e2,  0x323087 },			/* PM_BR_PRED_CR */
+	{ 0x230e3,  0x223087, 0x3230a0 },	/* PM_BR_PRED_TA */
+	{ 0x410c7,  0x441084 },			/* PM_THRD_L2MISS_BOTH_CYC */
+	{ 0x800c4,  0xc20e0 },			/* PM_DTLB_MISS */
+	{ 0xc50c6,  0xc60e0 },			/* PM_MRK_DTLB_MISS */
+	{ 0x100005, 0x600005 },			/* PM_RUN_CYC */
+	{ 0x100009, 0x200009 },			/* PM_INST_CMPL */
+	{ 0x200015, 0x300015 },			/* PM_LSU_LMQ_SRQ_EMPTY_CYC */
+	{ 0x300009, 0x400009 },			/* PM_INST_DISP */
+};
+
+/*
+ * Scan the alternatives table for a match and return the
+ * index into the alternatives table if found, else -1.
+ */
+static int find_alternative(unsigned int event)
+{
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
+		if (event < event_alternatives[i][0])
+			break;
+		for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j)
+			if (event == event_alternatives[i][j])
+				return i;
+	}
+	return -1;
+}
+
+static const unsigned char bytedecode_alternatives[4][4] = {
+	/* PMC 1 */	{ 0x21, 0x23, 0x25, 0x27 },
+	/* PMC 2 */	{ 0x07, 0x17, 0x0e, 0x1e },
+	/* PMC 3 */	{ 0x20, 0x22, 0x24, 0x26 },
+	/* PMC 4 */	{ 0x07, 0x17, 0x0e, 0x1e }
+};
+
+/*
+ * Some direct events for decodes of event bus byte 3 have alternative
+ * PMCSEL values on other counters.  This returns the alternative
+ * event code for those that do, or -1 otherwise.  This also handles
+ * alternative PCMSEL values for add events.
+ */
+static s64 find_alternative_bdecode(u64 event)
+{
+	int pmc, altpmc, pp, j;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc == 0 || pmc > 4)
+		return -1;
+	altpmc = 5 - pmc;	/* 1 <-> 4, 2 <-> 3 */
+	pp = event & PM_PMCSEL_MSK;
+	for (j = 0; j < 4; ++j) {
+		if (bytedecode_alternatives[pmc - 1][j] == pp) {
+			return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) |
+				(altpmc << PM_PMC_SH) |
+				bytedecode_alternatives[altpmc - 1][j];
+		}
+	}
+
+	/* new decode alternatives for power5+ */
+	if (pmc == 1 && (pp == 0x0d || pp == 0x0e))
+		return event + (2 << PM_PMC_SH) + (0x2e - 0x0d);
+	if (pmc == 3 && (pp == 0x2e || pp == 0x2f))
+		return event - (2 << PM_PMC_SH) - (0x2e - 0x0d);
+
+	/* alternative add event encodings */
+	if (pp == 0x10 || pp == 0x28)
+		return ((event ^ (0x10 ^ 0x28)) & ~PM_PMC_MSKS) |
+			(altpmc << PM_PMC_SH);
+
+	return -1;
+}
+
+static int power5p_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	int i, j, nalt = 1;
+	int nlim;
+	s64 ae;
+
+	alt[0] = event;
+	nalt = 1;
+	nlim = power5p_limited_pmc_event(event);
+	i = find_alternative(event);
+	if (i >= 0) {
+		for (j = 0; j < MAX_ALT; ++j) {
+			ae = event_alternatives[i][j];
+			if (ae && ae != event)
+				alt[nalt++] = ae;
+			nlim += power5p_limited_pmc_event(ae);
+		}
+	} else {
+		ae = find_alternative_bdecode(event);
+		if (ae > 0)
+			alt[nalt++] = ae;
+	}
+
+	if (flags & PPMU_ONLY_COUNT_RUN) {
+		/*
+		 * We're only counting in RUN state,
+		 * so PM_CYC is equivalent to PM_RUN_CYC
+		 * and PM_INST_CMPL === PM_RUN_INST_CMPL.
+		 * This doesn't include alternatives that don't provide
+		 * any extra flexibility in assigning PMCs (e.g.
+		 * 0x100005 for PM_RUN_CYC vs. 0xf for PM_CYC).
+		 * Note that even with these additional alternatives
+		 * we never end up with more than 3 alternatives for any event.
+		 */
+		j = nalt;
+		for (i = 0; i < nalt; ++i) {
+			switch (alt[i]) {
+			case 0xf:	/* PM_CYC */
+				alt[j++] = 0x600005;	/* PM_RUN_CYC */
+				++nlim;
+				break;
+			case 0x600005:	/* PM_RUN_CYC */
+				alt[j++] = 0xf;
+				break;
+			case 0x100009:	/* PM_INST_CMPL */
+				alt[j++] = 0x500009;	/* PM_RUN_INST_CMPL */
+				++nlim;
+				break;
+			case 0x500009:	/* PM_RUN_INST_CMPL */
+				alt[j++] = 0x100009;	/* PM_INST_CMPL */
+				alt[j++] = 0x200009;
+				break;
+			}
+		}
+		nalt = j;
+	}
+
+	if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) {
+		/* remove the limited PMC events */
+		j = 0;
+		for (i = 0; i < nalt; ++i) {
+			if (!power5p_limited_pmc_event(alt[i])) {
+				alt[j] = alt[i];
+				++j;
+			}
+		}
+		nalt = j;
+	} else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) {
+		/* remove all but the limited PMC events */
+		j = 0;
+		for (i = 0; i < nalt; ++i) {
+			if (power5p_limited_pmc_event(alt[i])) {
+				alt[j] = alt[i];
+				++j;
+			}
+		}
+		nalt = j;
+	}
+
+	return nalt;
+}
+
+/*
+ * Map of which direct events on which PMCs are marked instruction events.
+ * Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event.
+ * Bit 0 is set if it is marked for all PMCs.
+ * The 0x80 bit indicates a byte decode PMCSEL value.
+ */
+static unsigned char direct_event_is_marked[0x28] = {
+	0,	/* 00 */
+	0x1f,	/* 01 PM_IOPS_CMPL */
+	0x2,	/* 02 PM_MRK_GRP_DISP */
+	0xe,	/* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */
+	0,	/* 04 */
+	0x1c,	/* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */
+	0x80,	/* 06 */
+	0x80,	/* 07 */
+	0, 0, 0,/* 08 - 0a */
+	0x18,	/* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */
+	0,	/* 0c */
+	0x80,	/* 0d */
+	0x80,	/* 0e */
+	0,	/* 0f */
+	0,	/* 10 */
+	0x14,	/* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */
+	0,	/* 12 */
+	0x10,	/* 13 PM_MRK_GRP_CMPL */
+	0x1f,	/* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */
+	0x2,	/* 15 PM_MRK_GRP_ISSUED */
+	0x80,	/* 16 */
+	0x80,	/* 17 */
+	0, 0, 0, 0, 0,
+	0x80,	/* 1d */
+	0x80,	/* 1e */
+	0,	/* 1f */
+	0x80,	/* 20 */
+	0x80,	/* 21 */
+	0x80,	/* 22 */
+	0x80,	/* 23 */
+	0x80,	/* 24 */
+	0x80,	/* 25 */
+	0x80,	/* 26 */
+	0x80,	/* 27 */
+};
+
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int power5p_marked_instr_event(u64 event)
+{
+	int pmc, psel;
+	int bit, byte, unit;
+	u32 mask;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	psel = event & PM_PMCSEL_MSK;
+	if (pmc >= 5)
+		return 0;
+
+	bit = -1;
+	if (psel < sizeof(direct_event_is_marked)) {
+		if (direct_event_is_marked[psel] & (1 << pmc))
+			return 1;
+		if (direct_event_is_marked[psel] & 0x80)
+			bit = 4;
+		else if (psel == 0x08)
+			bit = pmc - 1;
+		else if (psel == 0x10)
+			bit = 4 - pmc;
+		else if (psel == 0x1b && (pmc == 1 || pmc == 3))
+			bit = 4;
+	} else if ((psel & 0x48) == 0x40) {
+		bit = psel & 7;
+	} else if (psel == 0x28) {
+		bit = pmc - 1;
+	} else if (pmc == 3 && (psel == 0x2e || psel == 0x2f)) {
+		bit = 4;
+	}
+
+	if (!(event & PM_BUSEVENT_MSK) || bit == -1)
+		return 0;
+
+	byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	if (unit == PM_LSU0) {
+		/* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */
+		mask = 0x5dff00;
+	} else if (unit == PM_LSU1 && byte >= 4) {
+		byte -= 4;
+		/* byte 5 bits 6-7, byte 6 bits 0,4, byte 7 bits 0-4,6 */
+		mask = 0x5f11c000;
+	} else
+		return 0;
+
+	return (mask >> (byte * 8 + bit)) & 1;
+}
+
+static int power5p_compute_mmcr(u64 event[], int n_ev,
+				unsigned int hwc[], u64 mmcr[])
+{
+	u64 mmcr1 = 0;
+	u64 mmcra = 0;
+	unsigned int pmc, unit, byte, psel;
+	unsigned int ttm;
+	int i, isbus, bit, grsel;
+	unsigned int pmc_inuse = 0;
+	unsigned char busbyte[4];
+	unsigned char unituse[16];
+	int ttmuse;
+
+	if (n_ev > 6)
+		return -1;
+
+	/* First pass to count resource use */
+	memset(busbyte, 0, sizeof(busbyte));
+	memset(unituse, 0, sizeof(unituse));
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			if (pmc > 6)
+				return -1;
+			if (pmc_inuse & (1 << (pmc - 1)))
+				return -1;
+			pmc_inuse |= 1 << (pmc - 1);
+		}
+		if (event[i] & PM_BUSEVENT_MSK) {
+			unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+			byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+			if (unit > PM_LASTUNIT)
+				return -1;
+			if (unit == PM_ISU0_ALT)
+				unit = PM_ISU0;
+			if (byte >= 4) {
+				if (unit != PM_LSU1)
+					return -1;
+				++unit;
+				byte &= 3;
+			}
+			if (busbyte[byte] && busbyte[byte] != unit)
+				return -1;
+			busbyte[byte] = unit;
+			unituse[unit] = 1;
+		}
+	}
+
+	/*
+	 * Assign resources and set multiplexer selects.
+	 *
+	 * PM_ISU0 can go either on TTM0 or TTM1, but that's the only
+	 * choice we have to deal with.
+	 */
+	if (unituse[PM_ISU0] &
+	    (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) {
+		unituse[PM_ISU0_ALT] = 1;	/* move ISU to TTM1 */
+		unituse[PM_ISU0] = 0;
+	}
+	/* Set TTM[01]SEL fields. */
+	ttmuse = 0;
+	for (i = PM_FPU; i <= PM_ISU1; ++i) {
+		if (!unituse[i])
+			continue;
+		if (ttmuse++)
+			return -1;
+		mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH;
+	}
+	ttmuse = 0;
+	for (; i <= PM_GRS; ++i) {
+		if (!unituse[i])
+			continue;
+		if (ttmuse++)
+			return -1;
+		mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH;
+	}
+	if (ttmuse > 1)
+		return -1;
+
+	/* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */
+	for (byte = 0; byte < 4; ++byte) {
+		unit = busbyte[byte];
+		if (!unit)
+			continue;
+		if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) {
+			/* get ISU0 through TTM1 rather than TTM0 */
+			unit = PM_ISU0_ALT;
+		} else if (unit == PM_LSU1 + 1) {
+			/* select lower word of LSU1 for this byte */
+			mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
+		}
+		ttm = unit >> 2;
+		mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+	}
+
+	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+		psel = event[i] & PM_PMCSEL_MSK;
+		isbus = event[i] & PM_BUSEVENT_MSK;
+		if (!pmc) {
+			/* Bus event or any-PMC direct event */
+			for (pmc = 0; pmc < 4; ++pmc) {
+				if (!(pmc_inuse & (1 << pmc)))
+					break;
+			}
+			if (pmc >= 4)
+				return -1;
+			pmc_inuse |= 1 << pmc;
+		} else if (pmc <= 4) {
+			/* Direct event */
+			--pmc;
+			if (isbus && (byte & 2) &&
+			    (psel == 8 || psel == 0x10 || psel == 0x28))
+				/* add events on higher-numbered bus */
+				mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
+		} else {
+			/* Instructions or run cycles on PMC5/6 */
+			--pmc;
+		}
+		if (isbus && unit == PM_GRS) {
+			bit = psel & 7;
+			grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK;
+			mmcr1 |= (u64)grsel << grsel_shift[bit];
+		}
+		if (power5p_marked_instr_event(event[i]))
+			mmcra |= MMCRA_SAMPLE_ENABLE;
+		if ((psel & 0x58) == 0x40 && (byte & 1) != ((pmc >> 1) & 1))
+			/* select alternate byte lane */
+			psel |= 0x10;
+		if (pmc <= 3)
+			mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc);
+		hwc[i] = pmc;
+	}
+
+	/* Return MMCRx values */
+	mmcr[0] = 0;
+	if (pmc_inuse & 1)
+		mmcr[0] = MMCR0_PMC1CE;
+	if (pmc_inuse & 0x3e)
+		mmcr[0] |= MMCR0_PMCjCE;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcra;
+	return 0;
+}
+
+static void power5p_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+	if (pmc <= 3)
+		mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
+}
+
+static int power5p_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0xf,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x100009,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x1c10a8, /* LD_REF_L1 */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x3c1088, /* LD_MISS_L1 */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x230e4,  /* BR_ISSUED */
+	[PERF_COUNT_HW_BRANCH_MISSES]		= 0x230e5,  /* BR_MPRED_CR */
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x1c10a8,	0x3c1088	},
+		[C(OP_WRITE)] = {	0x2c10a8,	0xc10c3		},
+		[C(OP_PREFETCH)] = {	0xc70e7,	-1		},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	0,		0		},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0		},
+		[C(OP_WRITE)] = {	0,		0		},
+		[C(OP_PREFETCH)] = {	0xc50c3,	0		},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0xc20e4,	0x800c4		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x800c0		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x230e4,	0x230e5		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+};
+
+struct power_pmu power5p_pmu = {
+	.n_counter = 6,
+	.max_alternatives = MAX_ALT,
+	.add_fields = 0x7000000000055ull,
+	.test_adder = 0x3000040000000ull,
+	.compute_mmcr = power5p_compute_mmcr,
+	.get_constraint = power5p_get_constraint,
+	.get_alternatives = power5p_get_alternatives,
+	.disable_pmc = power5p_disable_pmc,
+	.limited_pmc_event = power5p_limited_pmc_event,
+	.flags = PPMU_LIMITED_PMC5_6,
+	.n_generic = ARRAY_SIZE(power5p_generic_events),
+	.generic_events = power5p_generic_events,
+	.cache_events = &power5p_cache_events,
+};
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
new file mode 100644
index 00000000000..05600b66221
--- /dev/null
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -0,0 +1,611 @@
+/*
+ * Performance counter support for POWER5 (not POWER5++) processors.
+ *
+ * Copyright 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER5 (not POWER5++)
+ */
+#define PM_PMC_SH	20	/* PMC number (1-based) for direct events */
+#define PM_PMC_MSK	0xf
+#define PM_PMC_MSKS	(PM_PMC_MSK << PM_PMC_SH)
+#define PM_UNIT_SH	16	/* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK	0xf
+#define PM_BYTE_SH	12	/* Byte number of event bus to use */
+#define PM_BYTE_MSK	7
+#define PM_GRS_SH	8	/* Storage subsystem mux select */
+#define PM_GRS_MSK	7
+#define PM_BUSEVENT_MSK	0x80	/* Set if event uses event bus */
+#define PM_PMCSEL_MSK	0x7f
+
+/* Values in PM_UNIT field */
+#define PM_FPU		0
+#define PM_ISU0		1
+#define PM_IFU		2
+#define PM_ISU1		3
+#define PM_IDU		4
+#define PM_ISU0_ALT	6
+#define PM_GRS		7
+#define PM_LSU0		8
+#define PM_LSU1		0xc
+#define PM_LASTUNIT	0xc
+
+/*
+ * Bits in MMCR1 for POWER5
+ */
+#define MMCR1_TTM0SEL_SH	62
+#define MMCR1_TTM1SEL_SH	60
+#define MMCR1_TTM2SEL_SH	58
+#define MMCR1_TTM3SEL_SH	56
+#define MMCR1_TTMSEL_MSK	3
+#define MMCR1_TD_CP_DBG0SEL_SH	54
+#define MMCR1_TD_CP_DBG1SEL_SH	52
+#define MMCR1_TD_CP_DBG2SEL_SH	50
+#define MMCR1_TD_CP_DBG3SEL_SH	48
+#define MMCR1_GRS_L2SEL_SH	46
+#define MMCR1_GRS_L2SEL_MSK	3
+#define MMCR1_GRS_L3SEL_SH	44
+#define MMCR1_GRS_L3SEL_MSK	3
+#define MMCR1_GRS_MCSEL_SH	41
+#define MMCR1_GRS_MCSEL_MSK	7
+#define MMCR1_GRS_FABSEL_SH	39
+#define MMCR1_GRS_FABSEL_MSK	3
+#define MMCR1_PMC1_ADDER_SEL_SH	35
+#define MMCR1_PMC2_ADDER_SEL_SH	34
+#define MMCR1_PMC3_ADDER_SEL_SH	33
+#define MMCR1_PMC4_ADDER_SEL_SH	32
+#define MMCR1_PMC1SEL_SH	25
+#define MMCR1_PMC2SEL_SH	17
+#define MMCR1_PMC3SEL_SH	9
+#define MMCR1_PMC4SEL_SH	1
+#define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
+#define MMCR1_PMCSEL_MSK	0x7f
+
+/*
+ * Bits in MMCRA
+ */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ *         <><>[  ><><>< ><> [  >[ >[ ><  ><  ><  ><  ><><><><><><>
+ *         T0T1 NC G0G1G2 G3  UC PS1PS2 B0  B1  B2  B3 P6P5P4P3P2P1
+ *
+ * T0 - TTM0 constraint
+ *     54-55: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0xc0_0000_0000_0000
+ *
+ * T1 - TTM1 constraint
+ *     52-53: TTM1SEL value (0=IDU, 3=GRS) 0x30_0000_0000_0000
+ *
+ * NC - number of counters
+ *     51: NC error 0x0008_0000_0000_0000
+ *     48-50: number of events needing PMC1-4 0x0007_0000_0000_0000
+ *
+ * G0..G3 - GRS mux constraints
+ *     46-47: GRS_L2SEL value
+ *     44-45: GRS_L3SEL value
+ *     41-44: GRS_MCSEL value
+ *     39-40: GRS_FABSEL value
+ *	Note that these match up with their bit positions in MMCR1
+ *
+ * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS
+ *     37: UC3 error 0x20_0000_0000
+ *     36: FPU|IFU|ISU1 events needed 0x10_0000_0000
+ *     35: ISU0 events needed 0x08_0000_0000
+ *     34: IDU|GRS events needed 0x04_0000_0000
+ *
+ * PS1
+ *     33: PS1 error 0x2_0000_0000
+ *     31-32: count of events needing PMC1/2 0x1_8000_0000
+ *
+ * PS2
+ *     30: PS2 error 0x4000_0000
+ *     28-29: count of events needing PMC3/4 0x3000_0000
+ *
+ * B0
+ *     24-27: Byte 0 event source 0x0f00_0000
+ *	      Encoding as for the event code
+ *
+ * B1, B2, B3
+ *     20-23, 16-19, 12-15: Byte 1, 2, 3 event sources
+ *
+ * P1..P6
+ *     0-11: Count of events needing PMC1..PMC6
+ */
+
+static const int grsel_shift[8] = {
+	MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH,
+	MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH,
+	MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH
+};
+
+/* Masks and values for using events from the various units */
+static u64 unit_cons[PM_LASTUNIT+1][2] = {
+	[PM_FPU] =   { 0xc0002000000000ull, 0x00001000000000ull },
+	[PM_ISU0] =  { 0x00002000000000ull, 0x00000800000000ull },
+	[PM_ISU1] =  { 0xc0002000000000ull, 0xc0001000000000ull },
+	[PM_IFU] =   { 0xc0002000000000ull, 0x80001000000000ull },
+	[PM_IDU] =   { 0x30002000000000ull, 0x00000400000000ull },
+	[PM_GRS] =   { 0x30002000000000ull, 0x30000400000000ull },
+};
+
+static int power5_get_constraint(u64 event, u64 *maskp, u64 *valp)
+{
+	int pmc, byte, unit, sh;
+	int bit, fmask;
+	u64 mask = 0, value = 0;
+	int grp = -1;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > 6)
+			return -1;
+		sh = (pmc - 1) * 2;
+		mask |= 2 << sh;
+		value |= 1 << sh;
+		if (pmc <= 4)
+			grp = (pmc - 1) >> 1;
+		else if (event != 0x500009 && event != 0x600005)
+			return -1;
+	}
+	if (event & PM_BUSEVENT_MSK) {
+		unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+		if (unit > PM_LASTUNIT)
+			return -1;
+		if (unit == PM_ISU0_ALT)
+			unit = PM_ISU0;
+		mask |= unit_cons[unit][0];
+		value |= unit_cons[unit][1];
+		byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+		if (byte >= 4) {
+			if (unit != PM_LSU1)
+				return -1;
+			/* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */
+			++unit;
+			byte &= 3;
+		}
+		if (unit == PM_GRS) {
+			bit = event & 7;
+			fmask = (bit == 6)? 7: 3;
+			sh = grsel_shift[bit];
+			mask |= (u64)fmask << sh;
+			value |= (u64)((event >> PM_GRS_SH) & fmask) << sh;
+		}
+		/*
+		 * Bus events on bytes 0 and 2 can be counted
+		 * on PMC1/2; bytes 1 and 3 on PMC3/4.
+		 */
+		if (!pmc)
+			grp = byte & 1;
+		/* Set byte lane select field */
+		mask  |= 0xfULL << (24 - 4 * byte);
+		value |= (u64)unit << (24 - 4 * byte);
+	}
+	if (grp == 0) {
+		/* increment PMC1/2 field */
+		mask  |= 0x200000000ull;
+		value |= 0x080000000ull;
+	} else if (grp == 1) {
+		/* increment PMC3/4 field */
+		mask  |= 0x40000000ull;
+		value |= 0x10000000ull;
+	}
+	if (pmc < 5) {
+		/* need a counter from PMC1-4 set */
+		mask  |= 0x8000000000000ull;
+		value |= 0x1000000000000ull;
+	}
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+#define MAX_ALT	3	/* at most 3 alternatives for any event */
+
+static const unsigned int event_alternatives[][MAX_ALT] = {
+	{ 0x120e4,  0x400002 },			/* PM_GRP_DISP_REJECT */
+	{ 0x410c7,  0x441084 },			/* PM_THRD_L2MISS_BOTH_CYC */
+	{ 0x100005, 0x600005 },			/* PM_RUN_CYC */
+	{ 0x100009, 0x200009, 0x500009 },	/* PM_INST_CMPL */
+	{ 0x300009, 0x400009 },			/* PM_INST_DISP */
+};
+
+/*
+ * Scan the alternatives table for a match and return the
+ * index into the alternatives table if found, else -1.
+ */
+static int find_alternative(u64 event)
+{
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
+		if (event < event_alternatives[i][0])
+			break;
+		for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j)
+			if (event == event_alternatives[i][j])
+				return i;
+	}
+	return -1;
+}
+
+static const unsigned char bytedecode_alternatives[4][4] = {
+	/* PMC 1 */	{ 0x21, 0x23, 0x25, 0x27 },
+	/* PMC 2 */	{ 0x07, 0x17, 0x0e, 0x1e },
+	/* PMC 3 */	{ 0x20, 0x22, 0x24, 0x26 },
+	/* PMC 4 */	{ 0x07, 0x17, 0x0e, 0x1e }
+};
+
+/*
+ * Some direct events for decodes of event bus byte 3 have alternative
+ * PMCSEL values on other counters.  This returns the alternative
+ * event code for those that do, or -1 otherwise.
+ */
+static s64 find_alternative_bdecode(u64 event)
+{
+	int pmc, altpmc, pp, j;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc == 0 || pmc > 4)
+		return -1;
+	altpmc = 5 - pmc;	/* 1 <-> 4, 2 <-> 3 */
+	pp = event & PM_PMCSEL_MSK;
+	for (j = 0; j < 4; ++j) {
+		if (bytedecode_alternatives[pmc - 1][j] == pp) {
+			return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) |
+				(altpmc << PM_PMC_SH) |
+				bytedecode_alternatives[altpmc - 1][j];
+		}
+	}
+	return -1;
+}
+
+static int power5_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	int i, j, nalt = 1;
+	s64 ae;
+
+	alt[0] = event;
+	nalt = 1;
+	i = find_alternative(event);
+	if (i >= 0) {
+		for (j = 0; j < MAX_ALT; ++j) {
+			ae = event_alternatives[i][j];
+			if (ae && ae != event)
+				alt[nalt++] = ae;
+		}
+	} else {
+		ae = find_alternative_bdecode(event);
+		if (ae > 0)
+			alt[nalt++] = ae;
+	}
+	return nalt;
+}
+
+/*
+ * Map of which direct events on which PMCs are marked instruction events.
+ * Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event.
+ * Bit 0 is set if it is marked for all PMCs.
+ * The 0x80 bit indicates a byte decode PMCSEL value.
+ */
+static unsigned char direct_event_is_marked[0x28] = {
+	0,	/* 00 */
+	0x1f,	/* 01 PM_IOPS_CMPL */
+	0x2,	/* 02 PM_MRK_GRP_DISP */
+	0xe,	/* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */
+	0,	/* 04 */
+	0x1c,	/* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */
+	0x80,	/* 06 */
+	0x80,	/* 07 */
+	0, 0, 0,/* 08 - 0a */
+	0x18,	/* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */
+	0,	/* 0c */
+	0x80,	/* 0d */
+	0x80,	/* 0e */
+	0,	/* 0f */
+	0,	/* 10 */
+	0x14,	/* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */
+	0,	/* 12 */
+	0x10,	/* 13 PM_MRK_GRP_CMPL */
+	0x1f,	/* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */
+	0x2,	/* 15 PM_MRK_GRP_ISSUED */
+	0x80,	/* 16 */
+	0x80,	/* 17 */
+	0, 0, 0, 0, 0,
+	0x80,	/* 1d */
+	0x80,	/* 1e */
+	0,	/* 1f */
+	0x80,	/* 20 */
+	0x80,	/* 21 */
+	0x80,	/* 22 */
+	0x80,	/* 23 */
+	0x80,	/* 24 */
+	0x80,	/* 25 */
+	0x80,	/* 26 */
+	0x80,	/* 27 */
+};
+
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int power5_marked_instr_event(u64 event)
+{
+	int pmc, psel;
+	int bit, byte, unit;
+	u32 mask;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	psel = event & PM_PMCSEL_MSK;
+	if (pmc >= 5)
+		return 0;
+
+	bit = -1;
+	if (psel < sizeof(direct_event_is_marked)) {
+		if (direct_event_is_marked[psel] & (1 << pmc))
+			return 1;
+		if (direct_event_is_marked[psel] & 0x80)
+			bit = 4;
+		else if (psel == 0x08)
+			bit = pmc - 1;
+		else if (psel == 0x10)
+			bit = 4 - pmc;
+		else if (psel == 0x1b && (pmc == 1 || pmc == 3))
+			bit = 4;
+	} else if ((psel & 0x58) == 0x40)
+		bit = psel & 7;
+
+	if (!(event & PM_BUSEVENT_MSK))
+		return 0;
+
+	byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	if (unit == PM_LSU0) {
+		/* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */
+		mask = 0x5dff00;
+	} else if (unit == PM_LSU1 && byte >= 4) {
+		byte -= 4;
+		/* byte 4 bits 1,3,5,7, byte 5 bits 6-7, byte 7 bits 0-4,6 */
+		mask = 0x5f00c0aa;
+	} else
+		return 0;
+
+	return (mask >> (byte * 8 + bit)) & 1;
+}
+
+static int power5_compute_mmcr(u64 event[], int n_ev,
+			       unsigned int hwc[], u64 mmcr[])
+{
+	u64 mmcr1 = 0;
+	u64 mmcra = 0;
+	unsigned int pmc, unit, byte, psel;
+	unsigned int ttm, grp;
+	int i, isbus, bit, grsel;
+	unsigned int pmc_inuse = 0;
+	unsigned int pmc_grp_use[2];
+	unsigned char busbyte[4];
+	unsigned char unituse[16];
+	int ttmuse;
+
+	if (n_ev > 6)
+		return -1;
+
+	/* First pass to count resource use */
+	pmc_grp_use[0] = pmc_grp_use[1] = 0;
+	memset(busbyte, 0, sizeof(busbyte));
+	memset(unituse, 0, sizeof(unituse));
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			if (pmc > 6)
+				return -1;
+			if (pmc_inuse & (1 << (pmc - 1)))
+				return -1;
+			pmc_inuse |= 1 << (pmc - 1);
+			/* count 1/2 vs 3/4 use */
+			if (pmc <= 4)
+				++pmc_grp_use[(pmc - 1) >> 1];
+		}
+		if (event[i] & PM_BUSEVENT_MSK) {
+			unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+			byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+			if (unit > PM_LASTUNIT)
+				return -1;
+			if (unit == PM_ISU0_ALT)
+				unit = PM_ISU0;
+			if (byte >= 4) {
+				if (unit != PM_LSU1)
+					return -1;
+				++unit;
+				byte &= 3;
+			}
+			if (!pmc)
+				++pmc_grp_use[byte & 1];
+			if (busbyte[byte] && busbyte[byte] != unit)
+				return -1;
+			busbyte[byte] = unit;
+			unituse[unit] = 1;
+		}
+	}
+	if (pmc_grp_use[0] > 2 || pmc_grp_use[1] > 2)
+		return -1;
+
+	/*
+	 * Assign resources and set multiplexer selects.
+	 *
+	 * PM_ISU0 can go either on TTM0 or TTM1, but that's the only
+	 * choice we have to deal with.
+	 */
+	if (unituse[PM_ISU0] &
+	    (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) {
+		unituse[PM_ISU0_ALT] = 1;	/* move ISU to TTM1 */
+		unituse[PM_ISU0] = 0;
+	}
+	/* Set TTM[01]SEL fields. */
+	ttmuse = 0;
+	for (i = PM_FPU; i <= PM_ISU1; ++i) {
+		if (!unituse[i])
+			continue;
+		if (ttmuse++)
+			return -1;
+		mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH;
+	}
+	ttmuse = 0;
+	for (; i <= PM_GRS; ++i) {
+		if (!unituse[i])
+			continue;
+		if (ttmuse++)
+			return -1;
+		mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH;
+	}
+	if (ttmuse > 1)
+		return -1;
+
+	/* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */
+	for (byte = 0; byte < 4; ++byte) {
+		unit = busbyte[byte];
+		if (!unit)
+			continue;
+		if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) {
+			/* get ISU0 through TTM1 rather than TTM0 */
+			unit = PM_ISU0_ALT;
+		} else if (unit == PM_LSU1 + 1) {
+			/* select lower word of LSU1 for this byte */
+			mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
+		}
+		ttm = unit >> 2;
+		mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+	}
+
+	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+		psel = event[i] & PM_PMCSEL_MSK;
+		isbus = event[i] & PM_BUSEVENT_MSK;
+		if (!pmc) {
+			/* Bus event or any-PMC direct event */
+			for (pmc = 0; pmc < 4; ++pmc) {
+				if (pmc_inuse & (1 << pmc))
+					continue;
+				grp = (pmc >> 1) & 1;
+				if (isbus) {
+					if (grp == (byte & 1))
+						break;
+				} else if (pmc_grp_use[grp] < 2) {
+					++pmc_grp_use[grp];
+					break;
+				}
+			}
+			pmc_inuse |= 1 << pmc;
+		} else if (pmc <= 4) {
+			/* Direct event */
+			--pmc;
+			if ((psel == 8 || psel == 0x10) && isbus && (byte & 2))
+				/* add events on higher-numbered bus */
+				mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
+		} else {
+			/* Instructions or run cycles on PMC5/6 */
+			--pmc;
+		}
+		if (isbus && unit == PM_GRS) {
+			bit = psel & 7;
+			grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK;
+			mmcr1 |= (u64)grsel << grsel_shift[bit];
+		}
+		if (power5_marked_instr_event(event[i]))
+			mmcra |= MMCRA_SAMPLE_ENABLE;
+		if (pmc <= 3)
+			mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc);
+		hwc[i] = pmc;
+	}
+
+	/* Return MMCRx values */
+	mmcr[0] = 0;
+	if (pmc_inuse & 1)
+		mmcr[0] = MMCR0_PMC1CE;
+	if (pmc_inuse & 0x3e)
+		mmcr[0] |= MMCR0_PMCjCE;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcra;
+	return 0;
+}
+
+static void power5_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+	if (pmc <= 3)
+		mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
+}
+
+static int power5_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0xf,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x100009,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x4c1090, /* LD_REF_L1 */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x3c1088, /* LD_MISS_L1 */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x230e4,  /* BR_ISSUED */
+	[PERF_COUNT_HW_BRANCH_MISSES]		= 0x230e5,  /* BR_MPRED_CR */
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x4c1090,	0x3c1088	},
+		[C(OP_WRITE)] = {	0x3c1090,	0xc10c3		},
+		[C(OP_PREFETCH)] = {	0xc70e7,	0		},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	0,		0		},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x3c309b	},
+		[C(OP_WRITE)] = {	0,		0		},
+		[C(OP_PREFETCH)] = {	0xc50c3,	0		},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x2c4090,	0x800c4		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x800c0		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x230e4,	0x230e5		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+};
+
+struct power_pmu power5_pmu = {
+	.n_counter = 6,
+	.max_alternatives = MAX_ALT,
+	.add_fields = 0x7000090000555ull,
+	.test_adder = 0x3000490000000ull,
+	.compute_mmcr = power5_compute_mmcr,
+	.get_constraint = power5_get_constraint,
+	.get_alternatives = power5_get_alternatives,
+	.disable_pmc = power5_disable_pmc,
+	.n_generic = ARRAY_SIZE(power5_generic_events),
+	.generic_events = power5_generic_events,
+	.cache_events = &power5_cache_events,
+};
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
new file mode 100644
index 00000000000..46f74bebcfd
--- /dev/null
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -0,0 +1,532 @@
+/*
+ * Performance counter support for POWER6 processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER6
+ */
+#define PM_PMC_SH	20	/* PMC number (1-based) for direct events */
+#define PM_PMC_MSK	0x7
+#define PM_PMC_MSKS	(PM_PMC_MSK << PM_PMC_SH)
+#define PM_UNIT_SH	16	/* Unit event comes (TTMxSEL encoding) */
+#define PM_UNIT_MSK	0xf
+#define PM_UNIT_MSKS	(PM_UNIT_MSK << PM_UNIT_SH)
+#define PM_LLAV		0x8000	/* Load lookahead match value */
+#define PM_LLA		0x4000	/* Load lookahead match enable */
+#define PM_BYTE_SH	12	/* Byte of event bus to use */
+#define PM_BYTE_MSK	3
+#define PM_SUBUNIT_SH	8	/* Subunit event comes from (NEST_SEL enc.) */
+#define PM_SUBUNIT_MSK	7
+#define PM_SUBUNIT_MSKS	(PM_SUBUNIT_MSK << PM_SUBUNIT_SH)
+#define PM_PMCSEL_MSK	0xff	/* PMCxSEL value */
+#define PM_BUSEVENT_MSK	0xf3700
+
+/*
+ * Bits in MMCR1 for POWER6
+ */
+#define MMCR1_TTM0SEL_SH	60
+#define MMCR1_TTMSEL_SH(n)	(MMCR1_TTM0SEL_SH - (n) * 4)
+#define MMCR1_TTMSEL_MSK	0xf
+#define MMCR1_TTMSEL(m, n)	(((m) >> MMCR1_TTMSEL_SH(n)) & MMCR1_TTMSEL_MSK)
+#define MMCR1_NESTSEL_SH	45
+#define MMCR1_NESTSEL_MSK	0x7
+#define MMCR1_NESTSEL(m)	(((m) >> MMCR1_NESTSEL_SH) & MMCR1_NESTSEL_MSK)
+#define MMCR1_PMC1_LLA		((u64)1 << 44)
+#define MMCR1_PMC1_LLA_VALUE	((u64)1 << 39)
+#define MMCR1_PMC1_ADDR_SEL	((u64)1 << 35)
+#define MMCR1_PMC1SEL_SH	24
+#define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
+#define MMCR1_PMCSEL_MSK	0xff
+
+/*
+ * Map of which direct events on which PMCs are marked instruction events.
+ * Indexed by PMCSEL value >> 1.
+ * Bottom 4 bits are a map of which PMCs are interesting,
+ * top 4 bits say what sort of event:
+ *   0 = direct marked event,
+ *   1 = byte decode event,
+ *   4 = add/and event (PMC1 -> bits 0 & 4),
+ *   5 = add/and event (PMC1 -> bits 1 & 5),
+ *   6 = add/and event (PMC1 -> bits 2 & 6),
+ *   7 = add/and event (PMC1 -> bits 3 & 7).
+ */
+static unsigned char direct_event_is_marked[0x60 >> 1] = {
+	0,	/* 00 */
+	0,	/* 02 */
+	0,	/* 04 */
+	0x07,	/* 06 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */
+	0x04,	/* 08 PM_MRK_DFU_FIN */
+	0x06,	/* 0a PM_MRK_IFU_FIN, PM_MRK_INST_FIN */
+	0,	/* 0c */
+	0,	/* 0e */
+	0x02,	/* 10 PM_MRK_INST_DISP */
+	0x08,	/* 12 PM_MRK_LSU_DERAT_MISS */
+	0,	/* 14 */
+	0,	/* 16 */
+	0x0c,	/* 18 PM_THRESH_TIMEO, PM_MRK_INST_FIN */
+	0x0f,	/* 1a PM_MRK_INST_DISP, PM_MRK_{FXU,FPU,LSU}_FIN */
+	0x01,	/* 1c PM_MRK_INST_ISSUED */
+	0,	/* 1e */
+	0,	/* 20 */
+	0,	/* 22 */
+	0,	/* 24 */
+	0,	/* 26 */
+	0x15,	/* 28 PM_MRK_DATA_FROM_L2MISS, PM_MRK_DATA_FROM_L3MISS */
+	0,	/* 2a */
+	0,	/* 2c */
+	0,	/* 2e */
+	0x4f,	/* 30 */
+	0x7f,	/* 32 */
+	0x4f,	/* 34 */
+	0x5f,	/* 36 */
+	0x6f,	/* 38 */
+	0x4f,	/* 3a */
+	0,	/* 3c */
+	0x08,	/* 3e PM_MRK_INST_TIMEO */
+	0x1f,	/* 40 */
+	0x1f,	/* 42 */
+	0x1f,	/* 44 */
+	0x1f,	/* 46 */
+	0x1f,	/* 48 */
+	0x1f,	/* 4a */
+	0x1f,	/* 4c */
+	0x1f,	/* 4e */
+	0,	/* 50 */
+	0x05,	/* 52 PM_MRK_BR_TAKEN, PM_MRK_BR_MPRED */
+	0x1c,	/* 54 PM_MRK_PTEG_FROM_L3MISS, PM_MRK_PTEG_FROM_L2MISS */
+	0x02,	/* 56 PM_MRK_LD_MISS_L1 */
+	0,	/* 58 */
+	0,	/* 5a */
+	0,	/* 5c */
+	0,	/* 5e */
+};
+
+/*
+ * Masks showing for each unit which bits are marked events.
+ * These masks are in LE order, i.e. 0x00000001 is byte 0, bit 0.
+ */
+static u32 marked_bus_events[16] = {
+	0x01000000,	/* direct events set 1: byte 3 bit 0 */
+	0x00010000,	/* direct events set 2: byte 2 bit 0 */
+	0, 0, 0, 0,	/* IDU, IFU, nest: nothing */
+	0x00000088,	/* VMX set 1: byte 0 bits 3, 7 */
+	0x000000c0,	/* VMX set 2: byte 0 bits 4-7 */
+	0x04010000,	/* LSU set 1: byte 2 bit 0, byte 3 bit 2 */
+	0xff010000u,	/* LSU set 2: byte 2 bit 0, all of byte 3 */
+	0,		/* LSU set 3 */
+	0x00000010,	/* VMX set 3: byte 0 bit 4 */
+	0,		/* BFP set 1 */
+	0x00000022,	/* BFP set 2: byte 0 bits 1, 5 */
+	0, 0
+};
+	
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int power6_marked_instr_event(u64 event)
+{
+	int pmc, psel, ptype;
+	int bit, byte, unit;
+	u32 mask;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	psel = (event & PM_PMCSEL_MSK) >> 1;	/* drop edge/level bit */
+	if (pmc >= 5)
+		return 0;
+
+	bit = -1;
+	if (psel < sizeof(direct_event_is_marked)) {
+		ptype = direct_event_is_marked[psel];
+		if (pmc == 0 || !(ptype & (1 << (pmc - 1))))
+			return 0;
+		ptype >>= 4;
+		if (ptype == 0)
+			return 1;
+		if (ptype == 1)
+			bit = 0;
+		else
+			bit = ptype ^ (pmc - 1);
+	} else if ((psel & 0x48) == 0x40)
+		bit = psel & 7;
+
+	if (!(event & PM_BUSEVENT_MSK) || bit == -1)
+		return 0;
+
+	byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	mask = marked_bus_events[unit];
+	return (mask >> (byte * 8 + bit)) & 1;
+}
+
+/*
+ * Assign PMC numbers and compute MMCR1 value for a set of events
+ */
+static int p6_compute_mmcr(u64 event[], int n_ev,
+			   unsigned int hwc[], u64 mmcr[])
+{
+	u64 mmcr1 = 0;
+	u64 mmcra = 0;
+	int i;
+	unsigned int pmc, ev, b, u, s, psel;
+	unsigned int ttmset = 0;
+	unsigned int pmc_inuse = 0;
+
+	if (n_ev > 6)
+		return -1;
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			if (pmc_inuse & (1 << (pmc - 1)))
+				return -1;	/* collision! */
+			pmc_inuse |= 1 << (pmc - 1);
+		}
+	}
+	for (i = 0; i < n_ev; ++i) {
+		ev = event[i];
+		pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			--pmc;
+		} else {
+			/* can go on any PMC; find a free one */
+			for (pmc = 0; pmc < 4; ++pmc)
+				if (!(pmc_inuse & (1 << pmc)))
+					break;
+			if (pmc >= 4)
+				return -1;
+			pmc_inuse |= 1 << pmc;
+		}
+		hwc[i] = pmc;
+		psel = ev & PM_PMCSEL_MSK;
+		if (ev & PM_BUSEVENT_MSK) {
+			/* this event uses the event bus */
+			b = (ev >> PM_BYTE_SH) & PM_BYTE_MSK;
+			u = (ev >> PM_UNIT_SH) & PM_UNIT_MSK;
+			/* check for conflict on this byte of event bus */
+			if ((ttmset & (1 << b)) && MMCR1_TTMSEL(mmcr1, b) != u)
+				return -1;
+			mmcr1 |= (u64)u << MMCR1_TTMSEL_SH(b);
+			ttmset |= 1 << b;
+			if (u == 5) {
+				/* Nest events have a further mux */
+				s = (ev >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK;
+				if ((ttmset & 0x10) &&
+				    MMCR1_NESTSEL(mmcr1) != s)
+					return -1;
+				ttmset |= 0x10;
+				mmcr1 |= (u64)s << MMCR1_NESTSEL_SH;
+			}
+			if (0x30 <= psel && psel <= 0x3d) {
+				/* these need the PMCx_ADDR_SEL bits */
+				if (b >= 2)
+					mmcr1 |= MMCR1_PMC1_ADDR_SEL >> pmc;
+			}
+			/* bus select values are different for PMC3/4 */
+			if (pmc >= 2 && (psel & 0x90) == 0x80)
+				psel ^= 0x20;
+		}
+		if (ev & PM_LLA) {
+			mmcr1 |= MMCR1_PMC1_LLA >> pmc;
+			if (ev & PM_LLAV)
+				mmcr1 |= MMCR1_PMC1_LLA_VALUE >> pmc;
+		}
+		if (power6_marked_instr_event(event[i]))
+			mmcra |= MMCRA_SAMPLE_ENABLE;
+		if (pmc < 4)
+			mmcr1 |= (u64)psel << MMCR1_PMCSEL_SH(pmc);
+	}
+	mmcr[0] = 0;
+	if (pmc_inuse & 1)
+		mmcr[0] = MMCR0_PMC1CE;
+	if (pmc_inuse & 0xe)
+		mmcr[0] |= MMCR0_PMCjCE;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcra;
+	return 0;
+}
+
+/*
+ * Layout of constraint bits:
+ *
+ *	0-1	add field: number of uses of PMC1 (max 1)
+ *	2-3, 4-5, 6-7, 8-9, 10-11: ditto for PMC2, 3, 4, 5, 6
+ *	12-15	add field: number of uses of PMC1-4 (max 4)
+ *	16-19	select field: unit on byte 0 of event bus
+ *	20-23, 24-27, 28-31 ditto for bytes 1, 2, 3
+ *	32-34	select field: nest (subunit) event selector
+ */
+static int p6_get_constraint(u64 event, u64 *maskp, u64 *valp)
+{
+	int pmc, byte, sh, subunit;
+	u64 mask = 0, value = 0;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > 4 && !(event == 0x500009 || event == 0x600005))
+			return -1;
+		sh = (pmc - 1) * 2;
+		mask |= 2 << sh;
+		value |= 1 << sh;
+	}
+	if (event & PM_BUSEVENT_MSK) {
+		byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+		sh = byte * 4 + (16 - PM_UNIT_SH);
+		mask |= PM_UNIT_MSKS << sh;
+		value |= (u64)(event & PM_UNIT_MSKS) << sh;
+		if ((event & PM_UNIT_MSKS) == (5 << PM_UNIT_SH)) {
+			subunit = (event >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK;
+			mask  |= (u64)PM_SUBUNIT_MSK << 32;
+			value |= (u64)subunit << 32;
+		}
+	}
+	if (pmc <= 4) {
+		mask  |= 0x8000;	/* add field for count of PMC1-4 uses */
+		value |= 0x1000;
+	}
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+static int p6_limited_pmc_event(u64 event)
+{
+	int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+
+	return pmc == 5 || pmc == 6;
+}
+
+#define MAX_ALT	4	/* at most 4 alternatives for any event */
+
+static const unsigned int event_alternatives[][MAX_ALT] = {
+	{ 0x0130e8, 0x2000f6, 0x3000fc },	/* PM_PTEG_RELOAD_VALID */
+	{ 0x080080, 0x10000d, 0x30000c, 0x4000f0 }, /* PM_LD_MISS_L1 */
+	{ 0x080088, 0x200054, 0x3000f0 },	/* PM_ST_MISS_L1 */
+	{ 0x10000a, 0x2000f4, 0x600005 },	/* PM_RUN_CYC */
+	{ 0x10000b, 0x2000f5 },			/* PM_RUN_COUNT */
+	{ 0x10000e, 0x400010 },			/* PM_PURR */
+	{ 0x100010, 0x4000f8 },			/* PM_FLUSH */
+	{ 0x10001a, 0x200010 },			/* PM_MRK_INST_DISP */
+	{ 0x100026, 0x3000f8 },			/* PM_TB_BIT_TRANS */
+	{ 0x100054, 0x2000f0 },			/* PM_ST_FIN */
+	{ 0x100056, 0x2000fc },			/* PM_L1_ICACHE_MISS */
+	{ 0x1000f0, 0x40000a },			/* PM_INST_IMC_MATCH_CMPL */
+	{ 0x1000f8, 0x200008 },			/* PM_GCT_EMPTY_CYC */
+	{ 0x1000fc, 0x400006 },			/* PM_LSU_DERAT_MISS_CYC */
+	{ 0x20000e, 0x400007 },			/* PM_LSU_DERAT_MISS */
+	{ 0x200012, 0x300012 },			/* PM_INST_DISP */
+	{ 0x2000f2, 0x3000f2 },			/* PM_INST_DISP */
+	{ 0x2000f8, 0x300010 },			/* PM_EXT_INT */
+	{ 0x2000fe, 0x300056 },			/* PM_DATA_FROM_L2MISS */
+	{ 0x2d0030, 0x30001a },			/* PM_MRK_FPU_FIN */
+	{ 0x30000a, 0x400018 },			/* PM_MRK_INST_FIN */
+	{ 0x3000f6, 0x40000e },			/* PM_L1_DCACHE_RELOAD_VALID */
+	{ 0x3000fe, 0x400056 },			/* PM_DATA_FROM_L3MISS */
+};
+
+/*
+ * This could be made more efficient with a binary search on
+ * a presorted list, if necessary
+ */
+static int find_alternatives_list(u64 event)
+{
+	int i, j;
+	unsigned int alt;
+
+	for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
+		if (event < event_alternatives[i][0])
+			return -1;
+		for (j = 0; j < MAX_ALT; ++j) {
+			alt = event_alternatives[i][j];
+			if (!alt || event < alt)
+				break;
+			if (event == alt)
+				return i;
+		}
+	}
+	return -1;
+}
+
+static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	int i, j, nlim;
+	unsigned int psel, pmc;
+	unsigned int nalt = 1;
+	u64 aevent;
+
+	alt[0] = event;
+	nlim = p6_limited_pmc_event(event);
+
+	/* check the alternatives table */
+	i = find_alternatives_list(event);
+	if (i >= 0) {
+		/* copy out alternatives from list */
+		for (j = 0; j < MAX_ALT; ++j) {
+			aevent = event_alternatives[i][j];
+			if (!aevent)
+				break;
+			if (aevent != event)
+				alt[nalt++] = aevent;
+			nlim += p6_limited_pmc_event(aevent);
+		}
+
+	} else {
+		/* Check for alternative ways of computing sum events */
+		/* PMCSEL 0x32 counter N == PMCSEL 0x34 counter 5-N */
+		psel = event & (PM_PMCSEL_MSK & ~1);	/* ignore edge bit */
+		pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc && (psel == 0x32 || psel == 0x34))
+			alt[nalt++] = ((event ^ 0x6) & ~PM_PMC_MSKS) |
+				((5 - pmc) << PM_PMC_SH);
+
+		/* PMCSEL 0x38 counter N == PMCSEL 0x3a counter N+/-2 */
+		if (pmc && (psel == 0x38 || psel == 0x3a))
+			alt[nalt++] = ((event ^ 0x2) & ~PM_PMC_MSKS) |
+				((pmc > 2? pmc - 2: pmc + 2) << PM_PMC_SH);
+	}
+
+	if (flags & PPMU_ONLY_COUNT_RUN) {
+		/*
+		 * We're only counting in RUN state,
+		 * so PM_CYC is equivalent to PM_RUN_CYC,
+		 * PM_INST_CMPL === PM_RUN_INST_CMPL, PM_PURR === PM_RUN_PURR.
+		 * This doesn't include alternatives that don't provide
+		 * any extra flexibility in assigning PMCs (e.g.
+		 * 0x10000a for PM_RUN_CYC vs. 0x1e for PM_CYC).
+		 * Note that even with these additional alternatives
+		 * we never end up with more than 4 alternatives for any event.
+		 */
+		j = nalt;
+		for (i = 0; i < nalt; ++i) {
+			switch (alt[i]) {
+			case 0x1e:	/* PM_CYC */
+				alt[j++] = 0x600005;	/* PM_RUN_CYC */
+				++nlim;
+				break;
+			case 0x10000a:	/* PM_RUN_CYC */
+				alt[j++] = 0x1e;	/* PM_CYC */
+				break;
+			case 2:		/* PM_INST_CMPL */
+				alt[j++] = 0x500009;	/* PM_RUN_INST_CMPL */
+				++nlim;
+				break;
+			case 0x500009:	/* PM_RUN_INST_CMPL */
+				alt[j++] = 2;		/* PM_INST_CMPL */
+				break;
+			case 0x10000e:	/* PM_PURR */
+				alt[j++] = 0x4000f4;	/* PM_RUN_PURR */
+				break;
+			case 0x4000f4:	/* PM_RUN_PURR */
+				alt[j++] = 0x10000e;	/* PM_PURR */
+				break;
+			}
+		}
+		nalt = j;
+	}
+
+	if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) {
+		/* remove the limited PMC events */
+		j = 0;
+		for (i = 0; i < nalt; ++i) {
+			if (!p6_limited_pmc_event(alt[i])) {
+				alt[j] = alt[i];
+				++j;
+			}
+		}
+		nalt = j;
+	} else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) {
+		/* remove all but the limited PMC events */
+		j = 0;
+		for (i = 0; i < nalt; ++i) {
+			if (p6_limited_pmc_event(alt[i])) {
+				alt[j] = alt[i];
+				++j;
+			}
+		}
+		nalt = j;
+	}
+
+	return nalt;
+}
+
+static void p6_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+	/* Set PMCxSEL to 0 to disable PMCx */
+	if (pmc <= 3)
+		mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
+}
+
+static int power6_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0x1e,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 2,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x280030, /* LD_REF_L1 */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x30000c, /* LD_MISS_L1 */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x410a0,  /* BR_PRED */
+	[PERF_COUNT_HW_BRANCH_MISSES]		= 0x400052, /* BR_MPRED */
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ * The "DTLB" and "ITLB" events relate to the DERAT and IERAT.
+ */
+static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x80082,	0x80080		},
+		[C(OP_WRITE)] = {	0x80086,	0x80088		},
+		[C(OP_PREFETCH)] = {	0x810a4,	0		},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x100056 	},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	0x4008c,	0		},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x150730,	0x250532	},
+		[C(OP_WRITE)] = {	0x250432,	0x150432	},
+		[C(OP_PREFETCH)] = {	0x810a6,	0		},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x20000e	},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x420ce		},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x430e6,	0x400052	},
+		[C(OP_WRITE)] = {	-1,		-1		},
+		[C(OP_PREFETCH)] = {	-1,		-1		},
+	},
+};
+
+struct power_pmu power6_pmu = {
+	.n_counter = 6,
+	.max_alternatives = MAX_ALT,
+	.add_fields = 0x1555,
+	.test_adder = 0x3000,
+	.compute_mmcr = p6_compute_mmcr,
+	.get_constraint = p6_get_constraint,
+	.get_alternatives = p6_get_alternatives,
+	.disable_pmc = p6_disable_pmc,
+	.limited_pmc_event = p6_limited_pmc_event,
+	.flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR,
+	.n_generic = ARRAY_SIZE(power6_generic_events),
+	.generic_events = power6_generic_events,
+	.cache_events = &power6_cache_events,
+};
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
new file mode 100644
index 00000000000..b72e7a19d05
--- /dev/null
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -0,0 +1,357 @@
+/*
+ * Performance counter support for POWER7 processors.
+ *
+ * Copyright 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER7
+ */
+#define PM_PMC_SH	16	/* PMC number (1-based) for direct events */
+#define PM_PMC_MSK	0xf
+#define PM_PMC_MSKS	(PM_PMC_MSK << PM_PMC_SH)
+#define PM_UNIT_SH	12	/* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK	0xf
+#define PM_COMBINE_SH	11	/* Combined event bit */
+#define PM_COMBINE_MSK	1
+#define PM_COMBINE_MSKS	0x800
+#define PM_L2SEL_SH	8	/* L2 event select */
+#define PM_L2SEL_MSK	7
+#define PM_PMCSEL_MSK	0xff
+
+/*
+ * Bits in MMCR1 for POWER7
+ */
+#define MMCR1_TTM0SEL_SH	60
+#define MMCR1_TTM1SEL_SH	56
+#define MMCR1_TTM2SEL_SH	52
+#define MMCR1_TTM3SEL_SH	48
+#define MMCR1_TTMSEL_MSK	0xf
+#define MMCR1_L2SEL_SH		45
+#define MMCR1_L2SEL_MSK		7
+#define MMCR1_PMC1_COMBINE_SH	35
+#define MMCR1_PMC2_COMBINE_SH	34
+#define MMCR1_PMC3_COMBINE_SH	33
+#define MMCR1_PMC4_COMBINE_SH	32
+#define MMCR1_PMC1SEL_SH	24
+#define MMCR1_PMC2SEL_SH	16
+#define MMCR1_PMC3SEL_SH	8
+#define MMCR1_PMC4SEL_SH	0
+#define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
+#define MMCR1_PMCSEL_MSK	0xff
+
+/*
+ * Bits in MMCRA
+ */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ *                                                 [  ><><><><><><>
+ *                                                  NC P6P5P4P3P2P1
+ *
+ * NC - number of counters
+ *     15: NC error 0x8000
+ *     12-14: number of events needing PMC1-4 0x7000
+ *
+ * P6
+ *     11: P6 error 0x800
+ *     10-11: Count of events needing PMC6
+ *
+ * P1..P5
+ *     0-9: Count of events needing PMC1..PMC5
+ */
+
+static int power7_get_constraint(u64 event, u64 *maskp, u64 *valp)
+{
+	int pmc, sh;
+	u64 mask = 0, value = 0;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > 6)
+			return -1;
+		sh = (pmc - 1) * 2;
+		mask |= 2 << sh;
+		value |= 1 << sh;
+		if (pmc >= 5 && !(event == 0x500fa || event == 0x600f4))
+			return -1;
+	}
+	if (pmc < 5) {
+		/* need a counter from PMC1-4 set */
+		mask  |= 0x8000;
+		value |= 0x1000;
+	}
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+#define MAX_ALT	2	/* at most 2 alternatives for any event */
+
+static const unsigned int event_alternatives[][MAX_ALT] = {
+	{ 0x200f2, 0x300f2 },		/* PM_INST_DISP */
+	{ 0x200f4, 0x600f4 },		/* PM_RUN_CYC */
+	{ 0x400fa, 0x500fa },		/* PM_RUN_INST_CMPL */
+};
+
+/*
+ * Scan the alternatives table for a match and return the
+ * index into the alternatives table if found, else -1.
+ */
+static int find_alternative(u64 event)
+{
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
+		if (event < event_alternatives[i][0])
+			break;
+		for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j)
+			if (event == event_alternatives[i][j])
+				return i;
+	}
+	return -1;
+}
+
+static s64 find_alternative_decode(u64 event)
+{
+	int pmc, psel;
+
+	/* this only handles the 4x decode events */
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	psel = event & PM_PMCSEL_MSK;
+	if ((pmc == 2 || pmc == 4) && (psel & ~7) == 0x40)
+		return event - (1 << PM_PMC_SH) + 8;
+	if ((pmc == 1 || pmc == 3) && (psel & ~7) == 0x48)
+		return event + (1 << PM_PMC_SH) - 8;
+	return -1;
+}
+
+static int power7_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	int i, j, nalt = 1;
+	s64 ae;
+
+	alt[0] = event;
+	nalt = 1;
+	i = find_alternative(event);
+	if (i >= 0) {
+		for (j = 0; j < MAX_ALT; ++j) {
+			ae = event_alternatives[i][j];
+			if (ae && ae != event)
+				alt[nalt++] = ae;
+		}
+	} else {
+		ae = find_alternative_decode(event);
+		if (ae > 0)
+			alt[nalt++] = ae;
+	}
+
+	if (flags & PPMU_ONLY_COUNT_RUN) {
+		/*
+		 * We're only counting in RUN state,
+		 * so PM_CYC is equivalent to PM_RUN_CYC
+		 * and PM_INST_CMPL === PM_RUN_INST_CMPL.
+		 * This doesn't include alternatives that don't provide
+		 * any extra flexibility in assigning PMCs.
+		 */
+		j = nalt;
+		for (i = 0; i < nalt; ++i) {
+			switch (alt[i]) {
+			case 0x1e:	/* PM_CYC */
+				alt[j++] = 0x600f4;	/* PM_RUN_CYC */
+				break;
+			case 0x600f4:	/* PM_RUN_CYC */
+				alt[j++] = 0x1e;
+				break;
+			case 0x2:	/* PM_PPC_CMPL */
+				alt[j++] = 0x500fa;	/* PM_RUN_INST_CMPL */
+				break;
+			case 0x500fa:	/* PM_RUN_INST_CMPL */
+				alt[j++] = 0x2;	/* PM_PPC_CMPL */
+				break;
+			}
+		}
+		nalt = j;
+	}
+
+	return nalt;
+}
+
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int power7_marked_instr_event(u64 event)
+{
+	int pmc, psel;
+	int unit;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	psel = event & PM_PMCSEL_MSK & ~1;	/* trim off edge/level bit */
+	if (pmc >= 5)
+		return 0;
+
+	switch (psel >> 4) {
+	case 2:
+		return pmc == 2 || pmc == 4;
+	case 3:
+		if (psel == 0x3c)
+			return pmc == 1;
+		if (psel == 0x3e)
+			return pmc != 2;
+		return 1;
+	case 4:
+	case 5:
+		return unit == 0xd;
+	case 6:
+		if (psel == 0x64)
+			return pmc >= 3;
+	case 8:
+		return unit == 0xd;
+	}
+	return 0;
+}
+
+static int power7_compute_mmcr(u64 event[], int n_ev,
+			       unsigned int hwc[], u64 mmcr[])
+{
+	u64 mmcr1 = 0;
+	u64 mmcra = 0;
+	unsigned int pmc, unit, combine, l2sel, psel;
+	unsigned int pmc_inuse = 0;
+	int i;
+
+	/* First pass to count resource use */
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			if (pmc > 6)
+				return -1;
+			if (pmc_inuse & (1 << (pmc - 1)))
+				return -1;
+			pmc_inuse |= 1 << (pmc - 1);
+		}
+	}
+
+	/* Second pass: assign PMCs, set all MMCR1 fields */
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		combine = (event[i] >> PM_COMBINE_SH) & PM_COMBINE_MSK;
+		l2sel = (event[i] >> PM_L2SEL_SH) & PM_L2SEL_MSK;
+		psel = event[i] & PM_PMCSEL_MSK;
+		if (!pmc) {
+			/* Bus event or any-PMC direct event */
+			for (pmc = 0; pmc < 4; ++pmc) {
+				if (!(pmc_inuse & (1 << pmc)))
+					break;
+			}
+			if (pmc >= 4)
+				return -1;
+			pmc_inuse |= 1 << pmc;
+		} else {
+			/* Direct or decoded event */
+			--pmc;
+		}
+		if (pmc <= 3) {
+			mmcr1 |= (u64) unit << (MMCR1_TTM0SEL_SH - 4 * pmc);
+			mmcr1 |= (u64) combine << (MMCR1_PMC1_COMBINE_SH - pmc);
+			mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc);
+			if (unit == 6)	/* L2 events */
+				mmcr1 |= (u64) l2sel << MMCR1_L2SEL_SH;
+		}
+		if (power7_marked_instr_event(event[i]))
+			mmcra |= MMCRA_SAMPLE_ENABLE;
+		hwc[i] = pmc;
+	}
+
+	/* Return MMCRx values */
+	mmcr[0] = 0;
+	if (pmc_inuse & 1)
+		mmcr[0] = MMCR0_PMC1CE;
+	if (pmc_inuse & 0x3e)
+		mmcr[0] |= MMCR0_PMCjCE;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcra;
+	return 0;
+}
+
+static void power7_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+	if (pmc <= 3)
+		mmcr[1] &= ~(0xffULL << MMCR1_PMCSEL_SH(pmc));
+}
+
+static int power7_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880,	/* LD_REF_L1_LSU*/
+	[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1	*/
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068,	/* BRU_FIN	*/
+	[PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6,	/* BR_MPRED	*/
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x400f0,	0xc880	},
+		[C(OP_WRITE)] = {	0,		0x300f0	},
+		[C(OP_PREFETCH)] = {	0xd8b8,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x200fc	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0x408a,		0	},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x6080,		0x6084	},
+		[C(OP_WRITE)] = {	0x6082,		0x6086	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x300fc	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x400fc	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x10068,	0x400f6	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+struct power_pmu power7_pmu = {
+	.n_counter = 6,
+	.max_alternatives = MAX_ALT + 1,
+	.add_fields = 0x1555ull,
+	.test_adder = 0x3000ull,
+	.compute_mmcr = power7_compute_mmcr,
+	.get_constraint = power7_get_constraint,
+	.get_alternatives = power7_get_alternatives,
+	.disable_pmc = power7_disable_pmc,
+	.n_generic = ARRAY_SIZE(power7_generic_events),
+	.generic_events = power7_generic_events,
+	.cache_events = &power7_cache_events,
+};
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
new file mode 100644
index 00000000000..ba0a357a89f
--- /dev/null
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -0,0 +1,482 @@
+/*
+ * Performance counter support for PPC970-family processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for PPC970
+ */
+#define PM_PMC_SH	12	/* PMC number (1-based) for direct events */
+#define PM_PMC_MSK	0xf
+#define PM_UNIT_SH	8	/* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK	0xf
+#define PM_SPCSEL_SH	6
+#define PM_SPCSEL_MSK	3
+#define PM_BYTE_SH	4	/* Byte number of event bus to use */
+#define PM_BYTE_MSK	3
+#define PM_PMCSEL_MSK	0xf
+
+/* Values in PM_UNIT field */
+#define PM_NONE		0
+#define PM_FPU		1
+#define PM_VPU		2
+#define PM_ISU		3
+#define PM_IFU		4
+#define PM_IDU		5
+#define PM_STS		6
+#define PM_LSU0		7
+#define PM_LSU1U	8
+#define PM_LSU1L	9
+#define PM_LASTUNIT	9
+
+/*
+ * Bits in MMCR0 for PPC970
+ */
+#define MMCR0_PMC1SEL_SH	8
+#define MMCR0_PMC2SEL_SH	1
+#define MMCR_PMCSEL_MSK		0x1f
+
+/*
+ * Bits in MMCR1 for PPC970
+ */
+#define MMCR1_TTM0SEL_SH	62
+#define MMCR1_TTM1SEL_SH	59
+#define MMCR1_TTM3SEL_SH	53
+#define MMCR1_TTMSEL_MSK	3
+#define MMCR1_TD_CP_DBG0SEL_SH	50
+#define MMCR1_TD_CP_DBG1SEL_SH	48
+#define MMCR1_TD_CP_DBG2SEL_SH	46
+#define MMCR1_TD_CP_DBG3SEL_SH	44
+#define MMCR1_PMC1_ADDER_SEL_SH	39
+#define MMCR1_PMC2_ADDER_SEL_SH	38
+#define MMCR1_PMC6_ADDER_SEL_SH	37
+#define MMCR1_PMC5_ADDER_SEL_SH	36
+#define MMCR1_PMC8_ADDER_SEL_SH	35
+#define MMCR1_PMC7_ADDER_SEL_SH	34
+#define MMCR1_PMC3_ADDER_SEL_SH	33
+#define MMCR1_PMC4_ADDER_SEL_SH	32
+#define MMCR1_PMC3SEL_SH	27
+#define MMCR1_PMC4SEL_SH	22
+#define MMCR1_PMC5SEL_SH	17
+#define MMCR1_PMC6SEL_SH	12
+#define MMCR1_PMC7SEL_SH	7
+#define MMCR1_PMC8SEL_SH	2
+
+static short mmcr1_adder_bits[8] = {
+	MMCR1_PMC1_ADDER_SEL_SH,
+	MMCR1_PMC2_ADDER_SEL_SH,
+	MMCR1_PMC3_ADDER_SEL_SH,
+	MMCR1_PMC4_ADDER_SEL_SH,
+	MMCR1_PMC5_ADDER_SEL_SH,
+	MMCR1_PMC6_ADDER_SEL_SH,
+	MMCR1_PMC7_ADDER_SEL_SH,
+	MMCR1_PMC8_ADDER_SEL_SH
+};
+
+/*
+ * Bits in MMCRA
+ */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ *               <><><>[  >[  >[  ><  ><  ><  ><  ><><><><><><><><>
+ *               SPT0T1 UC  PS1 PS2 B0  B1  B2  B3 P1P2P3P4P5P6P7P8
+ *
+ * SP - SPCSEL constraint
+ *     48-49: SPCSEL value 0x3_0000_0000_0000
+ *
+ * T0 - TTM0 constraint
+ *     46-47: TTM0SEL value (0=FPU, 2=IFU, 3=VPU) 0xC000_0000_0000
+ *
+ * T1 - TTM1 constraint
+ *     44-45: TTM1SEL value (0=IDU, 3=STS) 0x3000_0000_0000
+ *
+ * UC - unit constraint: can't have all three of FPU|IFU|VPU, ISU, IDU|STS
+ *     43: UC3 error 0x0800_0000_0000
+ *     42: FPU|IFU|VPU events needed 0x0400_0000_0000
+ *     41: ISU events needed 0x0200_0000_0000
+ *     40: IDU|STS events needed 0x0100_0000_0000
+ *
+ * PS1
+ *     39: PS1 error 0x0080_0000_0000
+ *     36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000
+ *
+ * PS2
+ *     35: PS2 error 0x0008_0000_0000
+ *     32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000
+ *
+ * B0
+ *     28-31: Byte 0 event source 0xf000_0000
+ *	      Encoding as for the event code
+ *
+ * B1, B2, B3
+ *     24-27, 20-23, 16-19: Byte 1, 2, 3 event sources
+ *
+ * P1
+ *     15: P1 error 0x8000
+ *     14-15: Count of events needing PMC1
+ *
+ * P2..P8
+ *     0-13: Count of events needing PMC2..PMC8
+ */
+
+static unsigned char direct_marked_event[8] = {
+	(1<<2) | (1<<3),	/* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */
+	(1<<3) | (1<<5),	/* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */
+	(1<<3) | (1<<5),	/* PMC3: PM_MRK_ST_CMPL_INT, PM_MRK_VMX_FIN */
+	(1<<4) | (1<<5),	/* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */
+	(1<<4) | (1<<5),	/* PMC5: PM_GRP_MRK, PM_MRK_GRP_TIMEO */
+	(1<<3) | (1<<4) | (1<<5),
+		/* PMC6: PM_MRK_ST_STS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */
+	(1<<4) | (1<<5),	/* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */
+	(1<<4)			/* PMC8: PM_MRK_LSU_FIN */
+};
+
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int p970_marked_instr_event(u64 event)
+{
+	int pmc, psel, unit, byte, bit;
+	unsigned int mask;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	psel = event & PM_PMCSEL_MSK;
+	if (pmc) {
+		if (direct_marked_event[pmc - 1] & (1 << psel))
+			return 1;
+		if (psel == 0)		/* add events */
+			bit = (pmc <= 4)? pmc - 1: 8 - pmc;
+		else if (psel == 7 || psel == 13)	/* decode events */
+			bit = 4;
+		else
+			return 0;
+	} else
+		bit = psel;
+
+	byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	mask = 0;
+	switch (unit) {
+	case PM_VPU:
+		mask = 0x4c;		/* byte 0 bits 2,3,6 */
+	case PM_LSU0:
+		/* byte 2 bits 0,2,3,4,6; all of byte 1 */
+		mask = 0x085dff00;
+	case PM_LSU1L:
+		mask = 0x50 << 24;	/* byte 3 bits 4,6 */
+		break;
+	}
+	return (mask >> (byte * 8 + bit)) & 1;
+}
+
+/* Masks and values for using events from the various units */
+static u64 unit_cons[PM_LASTUNIT+1][2] = {
+	[PM_FPU] =   { 0xc80000000000ull, 0x040000000000ull },
+	[PM_VPU] =   { 0xc80000000000ull, 0xc40000000000ull },
+	[PM_ISU] =   { 0x080000000000ull, 0x020000000000ull },
+	[PM_IFU] =   { 0xc80000000000ull, 0x840000000000ull },
+	[PM_IDU] =   { 0x380000000000ull, 0x010000000000ull },
+	[PM_STS] =   { 0x380000000000ull, 0x310000000000ull },
+};
+
+static int p970_get_constraint(u64 event, u64 *maskp, u64 *valp)
+{
+	int pmc, byte, unit, sh, spcsel;
+	u64 mask = 0, value = 0;
+	int grp = -1;
+
+	pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+	if (pmc) {
+		if (pmc > 8)
+			return -1;
+		sh = (pmc - 1) * 2;
+		mask |= 2 << sh;
+		value |= 1 << sh;
+		grp = ((pmc - 1) >> 1) & 1;
+	}
+	unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+	if (unit) {
+		if (unit > PM_LASTUNIT)
+			return -1;
+		mask |= unit_cons[unit][0];
+		value |= unit_cons[unit][1];
+		byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+		/*
+		 * Bus events on bytes 0 and 2 can be counted
+		 * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8.
+		 */
+		if (!pmc)
+			grp = byte & 1;
+		/* Set byte lane select field */
+		mask  |= 0xfULL << (28 - 4 * byte);
+		value |= (u64)unit << (28 - 4 * byte);
+	}
+	if (grp == 0) {
+		/* increment PMC1/2/5/6 field */
+		mask  |= 0x8000000000ull;
+		value |= 0x1000000000ull;
+	} else if (grp == 1) {
+		/* increment PMC3/4/7/8 field */
+		mask  |= 0x800000000ull;
+		value |= 0x100000000ull;
+	}
+	spcsel = (event >> PM_SPCSEL_SH) & PM_SPCSEL_MSK;
+	if (spcsel) {
+		mask  |= 3ull << 48;
+		value |= (u64)spcsel << 48;
+	}
+	*maskp = mask;
+	*valp = value;
+	return 0;
+}
+
+static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+	alt[0] = event;
+
+	/* 2 alternatives for LSU empty */
+	if (event == 0x2002 || event == 0x3002) {
+		alt[1] = event ^ 0x1000;
+		return 2;
+	}
+		
+	return 1;
+}
+
+static int p970_compute_mmcr(u64 event[], int n_ev,
+			     unsigned int hwc[], u64 mmcr[])
+{
+	u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0;
+	unsigned int pmc, unit, byte, psel;
+	unsigned int ttm, grp;
+	unsigned int pmc_inuse = 0;
+	unsigned int pmc_grp_use[2];
+	unsigned char busbyte[4];
+	unsigned char unituse[16];
+	unsigned char unitmap[] = { 0, 0<<3, 3<<3, 1<<3, 2<<3, 0|4, 3|4 };
+	unsigned char ttmuse[2];
+	unsigned char pmcsel[8];
+	int i;
+	int spcsel;
+
+	if (n_ev > 8)
+		return -1;
+
+	/* First pass to count resource use */
+	pmc_grp_use[0] = pmc_grp_use[1] = 0;
+	memset(busbyte, 0, sizeof(busbyte));
+	memset(unituse, 0, sizeof(unituse));
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		if (pmc) {
+			if (pmc_inuse & (1 << (pmc - 1)))
+				return -1;
+			pmc_inuse |= 1 << (pmc - 1);
+			/* count 1/2/5/6 vs 3/4/7/8 use */
+			++pmc_grp_use[((pmc - 1) >> 1) & 1];
+		}
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+		if (unit) {
+			if (unit > PM_LASTUNIT)
+				return -1;
+			if (!pmc)
+				++pmc_grp_use[byte & 1];
+			if (busbyte[byte] && busbyte[byte] != unit)
+				return -1;
+			busbyte[byte] = unit;
+			unituse[unit] = 1;
+		}
+	}
+	if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4)
+		return -1;
+
+	/*
+	 * Assign resources and set multiplexer selects.
+	 *
+	 * PM_ISU can go either on TTM0 or TTM1, but that's the only
+	 * choice we have to deal with.
+	 */
+	if (unituse[PM_ISU] &
+	    (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_VPU]))
+		unitmap[PM_ISU] = 2 | 4;	/* move ISU to TTM1 */
+	/* Set TTM[01]SEL fields. */
+	ttmuse[0] = ttmuse[1] = 0;
+	for (i = PM_FPU; i <= PM_STS; ++i) {
+		if (!unituse[i])
+			continue;
+		ttm = unitmap[i];
+		++ttmuse[(ttm >> 2) & 1];
+		mmcr1 |= (u64)(ttm & ~4) << MMCR1_TTM1SEL_SH;
+	}
+	/* Check only one unit per TTMx */
+	if (ttmuse[0] > 1 || ttmuse[1] > 1)
+		return -1;
+
+	/* Set byte lane select fields and TTM3SEL. */
+	for (byte = 0; byte < 4; ++byte) {
+		unit = busbyte[byte];
+		if (!unit)
+			continue;
+		if (unit <= PM_STS)
+			ttm = (unitmap[unit] >> 2) & 1;
+		else if (unit == PM_LSU0)
+			ttm = 2;
+		else {
+			ttm = 3;
+			if (unit == PM_LSU1L && byte >= 2)
+				mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
+		}
+		mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+	}
+
+	/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
+	memset(pmcsel, 0x8, sizeof(pmcsel));	/* 8 means don't count */
+	for (i = 0; i < n_ev; ++i) {
+		pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+		unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+		byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+		psel = event[i] & PM_PMCSEL_MSK;
+		if (!pmc) {
+			/* Bus event or any-PMC direct event */
+			if (unit)
+				psel |= 0x10 | ((byte & 2) << 2);
+			else
+				psel |= 8;
+			for (pmc = 0; pmc < 8; ++pmc) {
+				if (pmc_inuse & (1 << pmc))
+					continue;
+				grp = (pmc >> 1) & 1;
+				if (unit) {
+					if (grp == (byte & 1))
+						break;
+				} else if (pmc_grp_use[grp] < 4) {
+					++pmc_grp_use[grp];
+					break;
+				}
+			}
+			pmc_inuse |= 1 << pmc;
+		} else {
+			/* Direct event */
+			--pmc;
+			if (psel == 0 && (byte & 2))
+				/* add events on higher-numbered bus */
+				mmcr1 |= 1ull << mmcr1_adder_bits[pmc];
+		}
+		pmcsel[pmc] = psel;
+		hwc[i] = pmc;
+		spcsel = (event[i] >> PM_SPCSEL_SH) & PM_SPCSEL_MSK;
+		mmcr1 |= spcsel;
+		if (p970_marked_instr_event(event[i]))
+			mmcra |= MMCRA_SAMPLE_ENABLE;
+	}
+	for (pmc = 0; pmc < 2; ++pmc)
+		mmcr0 |= pmcsel[pmc] << (MMCR0_PMC1SEL_SH - 7 * pmc);
+	for (; pmc < 8; ++pmc)
+		mmcr1 |= (u64)pmcsel[pmc] << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2));
+	if (pmc_inuse & 1)
+		mmcr0 |= MMCR0_PMC1CE;
+	if (pmc_inuse & 0xfe)
+		mmcr0 |= MMCR0_PMCjCE;
+
+	mmcra |= 0x2000;	/* mark only one IOP per PPC instruction */
+
+	/* Return MMCRx values */
+	mmcr[0] = mmcr0;
+	mmcr[1] = mmcr1;
+	mmcr[2] = mmcra;
+	return 0;
+}
+
+static void p970_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+	int shift, i;
+
+	if (pmc <= 1) {
+		shift = MMCR0_PMC1SEL_SH - 7 * pmc;
+		i = 0;
+	} else {
+		shift = MMCR1_PMC3SEL_SH - 5 * (pmc - 2);
+		i = 1;
+	}
+	/*
+	 * Setting the PMCxSEL field to 0x08 disables PMC x.
+	 */
+	mmcr[i] = (mmcr[i] & ~(0x1fUL << shift)) | (0x08UL << shift);
+}
+
+static int ppc970_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 7,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 1,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x8810, /* PM_LD_REF_L1 */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x3810, /* PM_LD_MISS_L1 */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x431,  /* PM_BR_ISSUED */
+	[PERF_COUNT_HW_BRANCH_MISSES] 		= 0x327,  /* PM_GRP_BR_MPRED */
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x8810,		0x3810	},
+		[C(OP_WRITE)] = {	0x7810,		0x813	},
+		[C(OP_PREFETCH)] = {	0x731,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0x733,		0	},
+	},
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x704	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(ITLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0x700	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0x431,		0x327	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+struct power_pmu ppc970_pmu = {
+	.n_counter = 8,
+	.max_alternatives = 2,
+	.add_fields = 0x001100005555ull,
+	.test_adder = 0x013300000000ull,
+	.compute_mmcr = p970_compute_mmcr,
+	.get_constraint = p970_get_constraint,
+	.get_alternatives = p970_get_alternatives,
+	.disable_pmc = p970_disable_pmc,
+	.n_generic = ARRAY_SIZE(ppc970_generic_events),
+	.generic_events = ppc970_generic_events,
+	.cache_events = &ppc970_cache_events,
+};
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 5ec6a9e2393..ce01ff2474d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p)
 		return 1;
 
 	memory_limit = PAGE_ALIGN(memparse(p, &p));
-	DBG("memory limit = 0x%lx\n", memory_limit);
+	DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
 
 	return 0;
 }
@@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {}
 
 void __init early_init_devtree(void *params)
 {
-	unsigned long limit;
+	phys_addr_t limit;
 
 	DBG(" -> early_init_devtree(%p)\n", params);
 
@@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params)
 
 	limit = memory_limit;
 	if (! limit) {
-		unsigned long memsize;
+		phys_addr_t memsize;
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
@@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params)
 	lmb_analyze();
 	lmb_dump_all();
 
-	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index a047a6cfca4..8ef8a14abc9 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -264,6 +264,7 @@ SECTIONS
 		*(.data.page_aligned)
 	}
 
+	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
 		*(.data.cacheline_aligned)
 	}
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 9057335fdc6..2cf915e51e7 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -41,6 +41,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
 	return !!(v->arch.pending_exceptions);
 }
 
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
+{
+	/* do real check here */
+	return 1;
+}
+
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
 	return !(v->arch.msr & MSR_WE);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 8db35278a4b..29b742b90f1 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
 obj-$(CONFIG_XMON)	+= sstep.o
 obj-$(CONFIG_KPROBES)	+= sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-noncoherent.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
deleted file mode 100644
index 005a28d380a..00000000000
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *  PowerPC version derived from arch/arm/mm/consistent.c
- *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- *  Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators.  Used for DMA devices that want to
- * share uncached memory with the processor core.  The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- *						-- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	struct page *page;
-	unsigned long order;
-	int i;
-	unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
-	unsigned int array_size = nr_pages * sizeof(struct page *);
-	struct page **pages;
-	struct page *end;
-	u64 mask = 0x00ffffff, limit; /* ISA default */
-	struct vm_struct *area;
-
-	BUG_ON(!mem_init_done);
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if (limit && size >= limit) {
-		printk(KERN_WARNING "coherent allocation too big (requested "
-				"%#x mask %#Lx)\n", size, mask);
-		return NULL;
-	}
-
-	order = get_order(size);
-
-	if (mask != 0xffffffff)
-		gfp |= GFP_DMA;
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
-
-	end = page + (1 << order);
-
-	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
-	 */
-	{
-		unsigned long kaddr = (unsigned long)page_address(page);
-		memset(page_address(page), 0, size);
-		flush_dcache_range(kaddr, kaddr + size);
-	}
-
-	split_page(page, order);
-
-	/*
-	 * Set the "dma handle"
-	 */
-	*handle = page_to_phys(page);
-
-	area = get_vm_area_caller(size, VM_IOREMAP,
-			__builtin_return_address(1));
-	if (!area)
-		goto out_free_pages;
-
-	if (array_size > PAGE_SIZE) {
-		pages = vmalloc(array_size);
-		area->flags |= VM_VPAGES;
-	} else {
-		pages = kmalloc(array_size, GFP_KERNEL);
-	}
-	if (!pages)
-		goto out_free_area;
-
-	area->pages = pages;
-	area->nr_pages = nr_pages;
-
-	for (i = 0; i < nr_pages; i++)
-		pages[i] = page + i;
-
-	if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
-		goto out_unmap;
-
-	/*
-	 * Free the otherwise unused pages.
-	 */
-	page += nr_pages;
-	while (page < end) {
-		__free_page(page);
-		page++;
-	}
-
-	return area->addr;
-out_unmap:
-	vunmap(area->addr);
-	if (array_size > PAGE_SIZE)
-		vfree(pages);
-	else
-		kfree(pages);
-	goto out_free_pages;
-out_free_area:
-	free_vm_area(area);
-out_free_pages:
-	if (page)
-		__free_pages(page, order);
-no_page:
-	return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
-	vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
-	unsigned long start = (unsigned long)vaddr;
-	unsigned long end   = start + size;
-
-	switch (direction) {
-	case DMA_NONE:
-		BUG();
-	case DMA_FROM_DEVICE:
-		/*
-		 * invalidate only when cache-line aligned otherwise there is
-		 * the potential for discarding uncommitted data from the cache
-		 */
-		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
-			flush_dcache_range(start, end);
-		else
-			invalidate_dcache_range(start, end);
-		break;
-	case DMA_TO_DEVICE:		/* writeback only */
-		clean_dcache_range(start, end);
-		break;
-	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
-		flush_dcache_range(start, end);
-		break;
-	}
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
-		unsigned long offset, size_t size, int direction)
-{
-	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
-	size_t cur_size = seg_size;
-	unsigned long flags, start, seg_offset = offset;
-	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
-	int seg_nr = 0;
-
-	local_irq_save(flags);
-
-	do {
-		start = (unsigned long)kmap_atomic(page + seg_nr,
-				KM_PPC_SYNC_PAGE) + seg_offset;
-
-		/* Sync this buffer segment */
-		__dma_sync((void *)start, seg_size, direction);
-		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
-		seg_nr++;
-
-		/* Calculate next buffer segment size */
-		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
-		/* Add the segment size to our running total */
-		cur_size += seg_size;
-		seg_offset = 0;
-	} while (seg_nr < nr_segs);
-
-	local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
-	__dma_sync_page_highmem(page, offset, size, direction);
-#else
-	unsigned long start = (unsigned long)page_address(page) + offset;
-	__dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 17290bcedc5..b746f4ca420 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
 obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
new file mode 100644
index 00000000000..36692f5c9a7
--- /dev/null
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -0,0 +1,400 @@
+/*
+ *  PowerPC version derived from arch/arm/mm/consistent.c
+ *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators.  Used for DMA devices that want to
+ * share uncached memory with the processor core.  The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ *						-- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE		(IOREMAP_TOP)
+#define CONSISTENT_END 		(CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vm_region	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ *  struct vm_region vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct ppc_vm_region *c, *new;
+
+	new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+	struct ppc_vm_region *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	struct page *page;
+	struct ppc_vm_region *c;
+	unsigned long order;
+	u64 mask = ISA_DMA_THRESHOLD, limit;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			goto no_page;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			goto no_page;
+		}
+	}
+
+
+	size = PAGE_ALIGN(size);
+	limit = (mask + 1) & ~mask;
+	if ((limit && size >= limit) ||
+	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+		printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+		       size, mask);
+		return NULL;
+	}
+
+	order = get_order(size);
+
+	/* Might be useful if we ever have a real legacy DMA zone... */
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/*
+	 * Invalidate any data that might be lurking in the
+	 * kernel direct-mapped region for device DMA.
+	 */
+	{
+		unsigned long kaddr = (unsigned long)page_address(page);
+		memset(page_address(page), 0, size);
+		flush_dcache_range(kaddr, kaddr + size);
+	}
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = ppc_vm_region_alloc(&consistent_head, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (c) {
+		unsigned long vaddr = c->vm_start;
+		struct page *end = page + (1 << order);
+
+		split_page(page, order);
+
+		/*
+		 * Set the "dma handle"
+		 */
+		*handle = page_to_phys(page);
+
+		do {
+			SetPageReserved(page);
+			map_page(vaddr, page_to_phys(page),
+				 pgprot_noncached(PAGE_KERNEL));
+			page++;
+			vaddr += PAGE_SIZE;
+		} while (size -= PAGE_SIZE);
+
+		/*
+		 * Free the otherwise unused pages.
+		 */
+		while (page < end) {
+			__free_page(page);
+			page++;
+		}
+
+		return (void *)c->vm_start;
+	}
+
+	if (page)
+		__free_pages(page, order);
+ no_page:
+	return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+	struct ppc_vm_region *c;
+	unsigned long flags, addr;
+	
+	size = PAGE_ALIGN(size);
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+	if (!c)
+		goto no_area;
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	addr = c->vm_start;
+	do {
+		pte_t *ptep;
+		unsigned long pfn;
+
+		ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+							       addr),
+						    addr),
+					 addr);
+		if (!pte_none(*ptep) && pte_present(*ptep)) {
+			pfn = pte_pfn(*ptep);
+			pte_clear(&init_mm, addr, ptep);
+			if (pfn_valid(pfn)) {
+				struct page *page = pfn_to_page(pfn);
+
+				ClearPageReserved(page);
+				__free_page(page);
+			}
+		}
+		addr += PAGE_SIZE;
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	list_del(&c->vm_list);
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	kfree(c);
+	return;
+
+ no_area:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+	       __func__, vaddr);
+	dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start = (unsigned long)vaddr;
+	unsigned long end   = start + size;
+
+	switch (direction) {
+	case DMA_NONE:
+		BUG();
+	case DMA_FROM_DEVICE:
+		/*
+		 * invalidate only when cache-line aligned otherwise there is
+		 * the potential for discarding uncommitted data from the cache
+		 */
+		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+			flush_dcache_range(start, end);
+		else
+			invalidate_dcache_range(start, end);
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		clean_dcache_range(start, end);
+		break;
+	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+		unsigned long offset, size_t size, int direction)
+{
+	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+	size_t cur_size = seg_size;
+	unsigned long flags, start, seg_offset = offset;
+	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+	int seg_nr = 0;
+
+	local_irq_save(flags);
+
+	do {
+		start = (unsigned long)kmap_atomic(page + seg_nr,
+				KM_PPC_SYNC_PAGE) + seg_offset;
+
+		/* Sync this buffer segment */
+		__dma_sync((void *)start, seg_size, direction);
+		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+		seg_nr++;
+
+		/* Calculate next buffer segment size */
+		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+		/* Add the segment size to our running total */
+		cur_size += seg_size;
+		seg_offset = 0;
+	} while (seg_nr < nr_segs);
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+	__dma_sync_page_highmem(page, offset, size, direction);
+#else
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	__dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 76993941cac..5beffc8f481 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
+#include <linux/perf_counter.h>
 
 #include <asm/firmware.h>
 #include <asm/page.h>
@@ -170,6 +171,8 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 		die("Weird page fault", regs, SIGSEGV);
 	}
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
@@ -309,6 +312,8 @@ good_area:
 	}
 	if (ret & VM_FAULT_MAJOR) {
 		current->maj_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
 #ifdef CONFIG_PPC_SMLPAR
 		if (firmware_has_feature(FW_FEATURE_CMO)) {
 			preempt_disable();
@@ -316,8 +321,11 @@ good_area:
 			preempt_enable();
 		}
 #endif
-	} else
+	} else {
 		current->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 	up_read(&mm->mmap_sem);
 	return 0;
 
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 666a5e8a5be..3de6a0d9382 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -168,12 +168,8 @@ void __init MMU_init(void)
 		ppc_md.progress("MMU:mapin", 0x301);
 	mapin_ram();
 
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
+	/* Initialize early top-down ioremap allocator */
+	ioremap_bot = IOREMAP_TOP;
 
 	/* Map in I/O resources */
 	if (ppc_md.progress)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f668fa9ba80..579382c163a 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -57,7 +57,7 @@
 
 int init_bootmem_done;
 int mem_init_done;
-unsigned long memory_limit;
+phys_addr_t memory_limit;
 
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
@@ -380,6 +380,23 @@ void __init mem_init(void)
 		bsssize >> 10,
 		initsize >> 10);
 
+#ifdef CONFIG_PPC32
+	pr_info("Kernel virtual memory layout:\n");
+	pr_info("  * 0x%08lx..0x%08lx  : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+	pr_info("  * 0x%08lx..0x%08lx  : highmem PTEs\n",
+		PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	pr_info("  * 0x%08lx..0x%08lx  : consistent mem\n",
+		IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+	pr_info("  * 0x%08lx..0x%08lx  : early ioremap\n",
+		ioremap_bot, IOREMAP_TOP);
+	pr_info("  * 0x%08lx..0x%08lx  : vmalloc & ioremap\n",
+		VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
 	mem_init_done = 1;
 }
 
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index a70e311bd45..030d0005b4d 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id)
 
 	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
-	/* Mark this mm has having no context anymore */
-	mm->context.id = MMU_NO_CONTEXT;
-
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
 
+	/* Mark this mm has having no context anymore */
+	mm->context.id = MMU_NO_CONTEXT;
+
 	/* XXX This clear should ultimately be part of local_flush_tlb_mm */
 	__clear_bit(id, stale_map[cpu]);
 
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index f5c6fd42265..ae1d67cc090 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 		entry = do_dcache_icache_coherency(entry);
 	changed = !pte_same(*(ptep), entry);
 	if (changed) {
-		assert_pte_locked(vma->vm_mm, address);
+		if (!(vma->vm_flags & VM_HUGETLB))
+			assert_pte_locked(vma->vm_mm, address);
 		__ptep_set_access_flags(ptep, entry);
 		flush_tlb_page_nohash(vma, address);
 	}
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 430d0908fa5..5422169626b 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
 static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
 
 void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
 {
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 89497fb0428..3b52c80e5e3 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -2,7 +2,7 @@
  * PowerPC64 SLB support.
  *
  * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
- * Based on earlier code writteh by:
+ * Based on earlier code written by:
  * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
  *    Copyright (c) 2001 Dave Engebretsen
  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 3e3d91f536e..80774092db7 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -26,6 +26,7 @@
 static unsigned long reset_value[OP_MAX_COUNTER];
 
 static int oprofile_running;
+static int use_slot_nums;
 
 /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
 static u32 mmcr0_val;
@@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	else
 		mmcr0_val |= MMCR0_PROBLEM_DISABLE;
 
+	if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+	    __is_processor(PV_970) || __is_processor(PV_970FX) ||
+	    __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+	    __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+		use_slot_nums = 1;
+
 	return 0;
 }
 
@@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs)
 
 	mmcra = mfspr(SPRN_MMCRA);
 
-	if (mmcra & MMCRA_SAMPLE_ENABLE) {
+	if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
 		slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
 		if (slot > 1)
 			pc += 4 * (slot - 1);
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 14e027f5be6..f39c953d535 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -153,6 +153,7 @@ config 405GPR
 
 config XILINX_VIRTEX
 	bool
+	select DEFAULT_UIMAGE
 
 config XILINX_VIRTEX_II_PRO
 	bool
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index bf5c7ff2e6e..0d83a6a0397 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -246,6 +246,7 @@ config IBM440EP_ERR42
 # Xilinx specific config options.
 config XILINX_VIRTEX
 	bool
+	select DEFAULT_UIMAGE
 
 # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
 config XILINX_VIRTEX_5_FXT
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 9da795e4933..732ee93a8e9 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -1,6 +1,7 @@
 config PPC64
 	bool "64-bit kernel"
 	default n
+	select HAVE_PERF_COUNTERS
 	help
 	  This option selects whether a 32-bit or a 64-bit kernel
 	  will be built.
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5f961c464cc..296b5268754 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 
 	area->nid = nid;
 	area->order = order;
-	area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+	area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
+					area->order);
 
-	if (!area->pages)
+	if (!area->pages) {
+		printk(KERN_WARNING "%s: no page on node %d\n",
+			__func__, area->nid);
 		goto out_free_area;
+	}
 
-	addr = __pa(page_address(area->pages));
+	/*
+	 * We move the ptcal area to the middle of the allocated
+	 * page, in order to avoid prefetches in memcpy and similar
+	 * functions stepping on it.
+	 */
+	addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1);
+	printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n",
+			__func__, area->nid, addr);
 
 	ret = -EIO;
 	if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 647e8778743..47a20cfb448 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -17,6 +17,7 @@ config VIODASD
 
 config VIOCD
 	tristate "iSeries Virtual I/O CD support"
+	depends on BLOCK
 	select VIOPATH
 	help
 	  If you are running Linux on an IBM iSeries system and you want to
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ff43f1fd834..40219823d9b 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
 }
 
 
-void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
+static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 {
 	struct iommu_table *tbl;
+	struct device_node *dn = pdev->sysdata;
 	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
@@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
 		kfree(tbl);
 	pdev->dev.archdata.dma_data = pdn->iommu_table;
 }
+#else
+#define pci_dma_dev_setup_iseries	NULL
 #endif
 
 static struct iommu_table veth_iommu_table;
@@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void)
 	ppc_md.tce_build = tce_build_iSeries;
 	ppc_md.tce_free  = tce_free_iSeries;
 
+	ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries;
 	set_pci_dma_ops(&dma_iommu_ops);
 }
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 02a634faedb..21cddc30220 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	pdev->sysdata = node;
 	allocate_device_bars(pdev);
 	iseries_device_information(pdev, bus, *sub_bus);
-	iommu_devnode_init_iSeries(pdev, node);
 }
 
 /*
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 301855263b8..04296ffff8b 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 	}
 	return irq;
 }
+
+static void __devinit quirk_ipr_msi(struct pci_dev *dev)
+{
+	/* Something prevents MSIs from the IPR from working on Bimini,
+	 * and the driver has no smarts to recover. So disable MSI
+	 * on it for now. */
+
+	if (machine_is(maple)) {
+		dev->no_msi = 1;
+		dev_info(&dev->dev, "Quirk disabled MSI\n");
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+			quirk_ipr_msi);
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 80b513449f4..be3581a8c29 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -333,7 +333,7 @@ static void xics_eoi_lpar(unsigned int virq)
 	lpar_xirr_info_set((0xff << 24) | irq);
 }
 
-static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
+static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 {
 	unsigned int irq;
 	int status;
@@ -342,14 +342,14 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 
 	irq = (unsigned int)irq_map[virq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
-		return;
+		return -1;
 
 	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
 
 	if (status) {
 		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
 			__func__, irq, status);
-		return;
+		return -1;
 	}
 
 	/*
@@ -363,7 +363,7 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 		printk(KERN_WARNING
 			"%s: No online cpus in the mask %s for irq %d\n",
 			__func__, cpulist, virq);
-		return;
+		return -1;
 	}
 
 	status = rtas_call(ibm_set_xive, 3, 1, NULL,
@@ -372,8 +372,10 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 	if (status) {
 		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
 			__func__, irq, status);
-		return;
+		return -1;
 	}
+
+	return 0;
 }
 
 static struct irq_chip xics_pic_direct = {
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 9e105cbc5e5..a4779912a5c 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -250,7 +250,7 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 
 	set_capacity(bank->disk, bank->size >> AXON_RAM_SECTOR_SHIFT);
 	blk_queue_make_request(bank->disk->queue, axon_ram_make_request);
-	blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE);
+	blk_queue_logical_block_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE);
 	add_disk(bank->disk);
 
 	bank->irq_id = irq_of_parse_and_map(device->node, 0);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index afe8dbc964a..5c64ccd402e 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
-	struct resource r;
-	struct device_node *np;
-	struct platform_device *dev;
-	u32 freq = fsl_get_sys_freq();
-	int ret;
-
-	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
-	if (!np) {
-		ret = -ENODEV;
-		goto nodev;
-	}
-
-	memset(&r, 0, sizeof(r));
-
-	ret = of_address_to_resource(np, 0, &r);
-	if (ret)
-		goto err;
-
-	dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
-	if (IS_ERR(dev)) {
-		ret = PTR_ERR(dev);
-		goto err;
-	}
-
-	ret = platform_device_add_data(dev, &freq, sizeof(freq));
-	if (ret)
-		goto unreg;
-
-	of_node_put(np);
-	return 0;
-
-unreg:
-	platform_device_unregister(dev);
-err:
-	of_node_put(np);
-nodev:
-	return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {
 	if (!phy_type)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 21b95670159..352d8c3ef52 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -807,7 +807,7 @@ static void mpic_end_ipi(unsigned int irq)
 
 #endif /* CONFIG_SMP */
 
-void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 {
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
@@ -824,6 +824,8 @@ void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
 			       mpic_physmask(cpus_addr(tmp)[0]));
 	}
+
+	return 0;
 }
 
 static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
@@ -1057,13 +1059,6 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
-	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
-				       isu_size, &mpic_host_ops,
-				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-	if (mpic->irqhost == NULL)
-		return NULL;
-
-	mpic->irqhost->host_data = mpic;
 	mpic->hc_irq = mpic_irq_chip;
 	mpic->hc_irq.typename = name;
 	if (flags & MPIC_PRIMARY)
@@ -1213,6 +1208,15 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
+	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+				       isu_size ? isu_size : mpic->num_sources,
+				       &mpic_host_ops,
+				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+	if (mpic->irqhost == NULL)
+		return NULL;
+
+	mpic->irqhost->host_data = mpic;
+
 	/* Display version */
 	switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
 	case 1:
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index 3cef2af10f4..eff433c322a 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -36,6 +36,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic)
 
 extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
 extern void mpic_set_vector(unsigned int virq, unsigned int vector);
-extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
 
 #endif /* _POWERPC_SYSDEV_MPIC_H */
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index a22e1a2df1a..c658b413c9b 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -41,8 +41,32 @@
 
 static struct irq_host *master_irqhost;
 
+#define XILINX_INTC_MAXIRQS	(32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+	IRQ_TYPE_EDGE_RISING,
+	IRQ_TYPE_EDGE_FALLING,
+	IRQ_TYPE_LEVEL_HIGH,
+	IRQ_TYPE_LEVEL_LOW,
+};
+
 /*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
  */
 static void xilinx_intc_mask(unsigned int virq)
 {
@@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq)
 	out_be32(regs + XINTC_CIE, 1 << irq);
 }
 
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+	struct irq_desc *desc = get_irq_desc(virq);
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+	return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
 	pr_debug("unmask: %d\n", irq);
 	out_be32(regs + XINTC_SIE, 1 << irq);
+
+	/* ack level irqs because they can't be acked during
+	 * ack function since the handle_level_irq function
+	 * acks the irq before calling the inerrupt handler
+	 */
+	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+	.typename = "Xilinx Level INTC",
+	.mask = xilinx_intc_mask,
+	.mask_ack = xilinx_intc_mask,
+	.unmask = xilinx_intc_level_unmask,
+	.set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void *regs = get_irq_chip_data(virq);
+	pr_debug("unmask: %d\n", irq);
+	out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
@@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq)
 	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static struct irq_chip xilinx_intc_irqchip = {
-	.typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+	.typename = "Xilinx Edge  INTC",
 	.mask = xilinx_intc_mask,
-	.unmask = xilinx_intc_unmask,
-	.ack = xilinx_intc_ack,
+	.unmask = xilinx_intc_edge_unmask,
+	.ack = xilinx_intc_edge_ack,
+	.set_type = xilinx_intc_set_type,
 };
 
 /*
  * IRQ Host operations
  */
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+				u32 *intspec, unsigned int intsize,
+				irq_hw_number_t *out_hwirq,
+				unsigned int *out_flags)
+{
+	if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+		return -EINVAL;
+
+	/* keep a copy of the interrupt type til the interrupt is mapped
+	 */
+	xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+	/* Xilinx uses 2 interrupt entries, the 1st being the h/w
+	 * interrupt number, the 2nd being the interrupt type, edge or level
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = xilinx_intc_map_senses[intspec[1]];
+
+	return 0;
+}
 static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
 				  irq_hw_number_t irq)
 {
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
-	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+	    xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+		set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+			handle_level_irq);
+	} else {
+		set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+			handle_edge_irq);
+	}
 	return 0;
 }
 
 static struct irq_host_ops xilinx_intc_ops = {
 	.map = xilinx_intc_map,
+	.xlate = xilinx_intc_xlate,
 };
 
 struct irq_host * __init
@@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np)
 	out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
 
 	/* Allocate and initialize an irq_host structure. */
-	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+			     &xilinx_intc_ops, -1);
 	if (!irq)
 		panic(__FILE__ ": Cannot allocate IRQ host\n");
 	irq->host_data = regs;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2eca5fe0e75..99dc3ded6b4 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -82,6 +82,11 @@ config S390
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FTRACE_SYSCALLS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_DEFAULT_NO_SPIN_MUTEXES
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
@@ -567,6 +572,24 @@ bool "s390 guest support for KVM (EXPERIMENTAL)"
 	  the KVM hypervisor. This will add detection for KVM as well  as a
 	  virtio transport. If KVM is detected, the virtio console will be
 	  the default console.
+
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y.
+
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index de432f2de2d..fca9dffcc66 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -275,6 +275,6 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define smp_mb__before_atomic_inc()	smp_mb()
 #define smp_mb__after_atomic_inc()	smp_mb()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __KERNEL__ */
 #endif /* __ARCH_S390_ATOMIC__  */
diff --git a/arch/s390/include/asm/bitsperlong.h b/arch/s390/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6b235aea9c6
--- /dev/null
+++ b/arch/s390/include/asm/bitsperlong.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_S390_BITSPERLONG_H
+#define __ASM_S390_BITSPERLONG_H
+
+#ifndef __s390x__
+#define __BITS_PER_LONG 32
+#else
+#define __BITS_PER_LONG 64
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_S390_BITSPERLONG_H */
+
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index de065b32381..01a08020bc0 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -5,6 +5,7 @@
  */
 #include <linux/types.h>
 #include <linux/sched.h>
+#include <linux/thread_info.h>
 
 #define PSW32_MASK_PER		0x40000000UL
 #define PSW32_MASK_DAT		0x04000000UL
@@ -163,12 +164,28 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
+#ifdef CONFIG_COMPAT
+
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_31BIT);
+}
+
+#else
+
+static inline int is_compat_task(void)
+{
+	return 0;
+}
+
+#endif
+
 static inline void __user *compat_alloc_user_space(long len)
 {
 	unsigned long stack;
 
 	stack = KSTK_ESP(current);
-	if (test_thread_flag(TIF_31BIT))
+	if (is_compat_task())
 		stack &= 0x7fffffffUL;
 	return (void __user *) (stack - len);
 }
diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
deleted file mode 100644
index d60a2eefb17..00000000000
--- a/arch/s390/include/asm/cpu.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  include/asm-s390/cpu.h
- *
- *    Copyright IBM Corp. 2007
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPU_H_
-#define _ASM_S390_CPU_H_
-
-#include <linux/types.h>
-#include <linux/percpu.h>
-#include <linux/spinlock.h>
-
-struct s390_idle_data {
-	spinlock_t lock;
-	unsigned long long idle_count;
-	unsigned long long idle_enter;
-	unsigned long long idle_time;
-};
-
-DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
-
-void vtime_start_cpu(void);
-
-static inline void s390_idle_check(void)
-{
-	if ((&__get_cpu_var(s390_idle))->idle_enter != 0ULL)
-		vtime_start_cpu();
-}
-
-#endif /* _ASM_S390_CPU_H_ */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 941384fbd39..ec917d42ee6 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -9,6 +9,9 @@
 #ifndef _S390_CPUTIME_H
 #define _S390_CPUTIME_H
 
+#include <linux/types.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
 #include <asm/div64.h>
 
 /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */
@@ -174,8 +177,24 @@ cputime64_to_clock_t(cputime64_t cputime)
        return __div(cputime, 4096000000ULL / USER_HZ);
 }
 
+struct s390_idle_data {
+	spinlock_t lock;
+	unsigned long long idle_count;
+	unsigned long long idle_enter;
+	unsigned long long idle_time;
+};
+
+DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
+
+void vtime_start_cpu(void);
 cputime64_t s390_get_idle_time(int cpu);
 
 #define arch_idle_time(cpu) s390_get_idle_time(cpu)
 
+static inline void s390_idle_check(void)
+{
+	if ((&__get_cpu_var(s390_idle))->idle_enter != 0ULL)
+		vtime_start_cpu();
+}
+
 #endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 5a5bc75e19d..96c14a9102b 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -2,7 +2,28 @@
 #define _ASM_S390_FTRACE_H
 
 #ifndef __ASSEMBLY__
+
 extern void _mcount(void);
+extern unsigned long ftrace_dyn_func;
+
+struct dyn_arch_ftrace { };
+
+#define MCOUNT_ADDR ((long)_mcount)
+
+#ifdef CONFIG_64BIT
+#define MCOUNT_OFFSET_RET 18
+#define MCOUNT_INSN_SIZE  24
+#define MCOUNT_OFFSET	  14
+#else
+#define MCOUNT_OFFSET_RET 26
+#define MCOUNT_INSN_SIZE  30
+#define MCOUNT_OFFSET	   8
 #endif
 
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr - MCOUNT_OFFSET;
+}
+
+#endif /* __ASSEMBLY__ */
 #endif /* _ASM_S390_FTRACE_H */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 54ea39f96ec..a27d0d5a6f8 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -13,6 +13,8 @@
 
 #ifndef ASM_KVM_HOST_H
 #define ASM_KVM_HOST_H
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
 #include <asm/cpuid.h>
@@ -210,7 +212,8 @@ struct kvm_vcpu_arch {
 	s390_fp_regs      guest_fpregs;
 	unsigned int      guest_acrs[NUM_ACRS];
 	struct kvm_s390_local_interrupt local_int;
-	struct timer_list ckc_timer;
+	struct hrtimer    ckc_timer;
+	struct tasklet_struct tasklet;
 	union  {
 		cpuid_t	  cpu_id;
 		u64	  stidp_data;
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 3aeca492b14..5046ad6b7a6 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -30,6 +30,7 @@
 #define __LC_SUBCHANNEL_NR		0x00ba
 #define __LC_IO_INT_PARM		0x00bc
 #define __LC_IO_INT_WORD		0x00c0
+#define __LC_STFL_FAC_LIST		0x00c8
 #define __LC_MCCK_CODE			0x00e8
 
 #define __LC_DUMP_REIPL			0x0e00
@@ -67,6 +68,7 @@
 #define __LC_CPUID			0x02b0
 #define __LC_INT_CLOCK			0x02c8
 #define __LC_MACHINE_FLAGS		0x02d8
+#define __LC_FTRACE_FUNC		0x02dc
 #define __LC_IRB			0x0300
 #define __LC_PFAULT_INTPARM		0x0080
 #define __LC_CPU_TIMER_SAVE_AREA	0x00d8
@@ -112,6 +114,7 @@
 #define __LC_INT_CLOCK			0x0340
 #define __LC_VDSO_PER_CPU		0x0350
 #define __LC_MACHINE_FLAGS		0x0358
+#define __LC_FTRACE_FUNC		0x0360
 #define __LC_IRB			0x0380
 #define __LC_PASTE			0x03c0
 #define __LC_PFAULT_INTPARM		0x11b8
@@ -280,7 +283,8 @@ struct _lowcore
 	__u64	int_clock;			/* 0x02c8 */
 	__u64	clock_comparator;		/* 0x02d0 */
 	__u32	machine_flags;			/* 0x02d8 */
-	__u8	pad_0x02dc[0x0300-0x02dc];	/* 0x02dc */
+	__u32	ftrace_func;			/* 0x02dc */
+	__u8	pad_0x02f0[0x0300-0x02f0];	/* 0x02f0 */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
@@ -385,7 +389,8 @@ struct _lowcore
 	__u64	clock_comparator;		/* 0x0348 */
 	__u64	vdso_per_cpu_data;		/* 0x0350 */
 	__u64	machine_flags;			/* 0x0358 */
-	__u8	pad_0x0360[0x0380-0x0360];	/* 0x0360 */
+	__u64	ftrace_func;			/* 0x0360 */
+	__u8	pad_0x0368[0x0380-0x0368];	/* 0x0368 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
index da01432e8f4..f63fe7b431e 100644
--- a/arch/s390/include/asm/mman.h
+++ b/arch/s390/include/asm/mman.h
@@ -9,7 +9,7 @@
 #ifndef __S390_MMAN_H__
 #define __S390_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 32e8f6aa438..3e3594d01f8 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -150,7 +150,7 @@ void arch_alloc_page(struct page *page, int order);
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #define __HAVE_ARCH_GATE_AREA 1
 
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 5caddd4f7be..60a7b1a1702 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -112,12 +112,15 @@ extern char empty_zero_page[PAGE_SIZE];
  * effect, this also makes sure that 64 bit module code cannot be used
  * as system call address.
  */
+
+extern unsigned long VMALLOC_START;
+
 #ifndef __s390x__
-#define VMALLOC_START	0x78000000UL
+#define VMALLOC_SIZE	(96UL << 20)
 #define VMALLOC_END	0x7e000000UL
 #define VMEM_MAP_END	0x80000000UL
 #else /* __s390x__ */
-#define VMALLOC_START	0x3e000000000UL
+#define VMALLOC_SIZE	(1UL << 30)
 #define VMALLOC_END	0x3e040000000UL
 #define VMEM_MAP_END	0x40000000000UL
 #endif /* __s390x__ */
diff --git a/arch/s390/include/asm/seccomp.h b/arch/s390/include/asm/seccomp.h
new file mode 100644
index 00000000000..781a9cf9b00
--- /dev/null
+++ b/arch/s390/include/asm/seccomp.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_S390_SECCOMP_H
+#define _ASM_S390_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read	__NR_read
+#define __NR_seccomp_write	__NR_write
+#define __NR_seccomp_exit	__NR_exit
+#define __NR_seccomp_sigreturn	__NR_sigreturn
+
+#define __NR_seccomp_read_32	__NR_read
+#define __NR_seccomp_write_32	__NR_write
+#define __NR_seccomp_exit_32	__NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif	/* _ASM_S390_SECCOMP_H */
diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h
index f6cfddb278c..cdf5cb2fe03 100644
--- a/arch/s390/include/asm/signal.h
+++ b/arch/s390/include/asm/signal.h
@@ -115,7 +115,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ     2048
 #define SIGSTKSZ        8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index f3861b09ebb..c9af0d19c7a 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -122,8 +122,10 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lp)
 #define __raw_write_can_lock(x) ((x)->lock == 0)
 
 extern void _raw_read_lock_wait(raw_rwlock_t *lp);
+extern void _raw_read_lock_wait_flags(raw_rwlock_t *lp, unsigned long flags);
 extern int _raw_read_trylock_retry(raw_rwlock_t *lp);
 extern void _raw_write_lock_wait(raw_rwlock_t *lp);
+extern void _raw_write_lock_wait_flags(raw_rwlock_t *lp, unsigned long flags);
 extern int _raw_write_trylock_retry(raw_rwlock_t *lp);
 
 static inline void __raw_read_lock(raw_rwlock_t *rw)
@@ -134,6 +136,14 @@ static inline void __raw_read_lock(raw_rwlock_t *rw)
 		_raw_read_lock_wait(rw);
 }
 
+static inline void __raw_read_lock_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	unsigned int old;
+	old = rw->lock & 0x7fffffffU;
+	if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old)
+		_raw_read_lock_wait_flags(rw, flags);
+}
+
 static inline void __raw_read_unlock(raw_rwlock_t *rw)
 {
 	unsigned int old, cmp;
@@ -151,6 +161,12 @@ static inline void __raw_write_lock(raw_rwlock_t *rw)
 		_raw_write_lock_wait(rw);
 }
 
+static inline void __raw_write_lock_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0))
+		_raw_write_lock_wait_flags(rw, flags);
+}
+
 static inline void __raw_write_unlock(raw_rwlock_t *rw)
 {
 	_raw_compare_and_swap(&rw->lock, 0x80000000, 0);
@@ -172,9 +188,6 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 	return _raw_write_trylock_retry(rw);
 }
 
-#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
-#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
-
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h
deleted file mode 100644
index 1f34580e67a..00000000000
--- a/arch/s390/include/asm/suspend.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_S390_SUSPEND_H
-#define __ASM_S390_SUSPEND_H
-
-#endif
-
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index 2429b87eb28..e0a73d3eb83 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -12,6 +12,7 @@
 #ifndef _ASM_SYSCALL_H
 #define _ASM_SYSCALL_H	1
 
+#include <linux/sched.h>
 #include <asm/ptrace.h>
 
 static inline long syscall_get_nr(struct task_struct *task,
diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h
index 67f66278f53..bc3a35cefc9 100644
--- a/arch/s390/include/asm/termios.h
+++ b/arch/s390/include/asm/termios.h
@@ -60,7 +60,7 @@ struct termio {
 #define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
 #define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
 
-#include <asm-generic/termios.h>
+#include <asm-generic/termios-base.h>
 
 #endif	/* __KERNEL__ */
 
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 461f2abd2e6..925bcc64903 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -83,14 +83,16 @@ static inline struct thread_info *current_thread_info(void)
 /*
  * thread information flags bit numbers
  */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
 #define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTART_SVC		4	/* restart svc with new svc number */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
 #define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
 #define TIF_MCCK_PENDING	7	/* machine check handling is pending */
+#define TIF_SYSCALL_TRACE	8	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	9	/* syscall auditing active */
+#define TIF_SECCOMP		10	/* secure computing */
+#define TIF_SYSCALL_FTRACE	11	/* ftrace syscall instrumentation */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
 					   TIF_NEED_RESCHED */
@@ -99,15 +101,17 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
 #define TIF_FREEZE		21	/* thread is freezing for suspend */
 
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
 #define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_FTRACE	(1<<TIF_SYSCALL_FTRACE)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h
index 3dc3fc22881..04d6b95a89c 100644
--- a/arch/s390/include/asm/types.h
+++ b/arch/s390/include/asm/types.h
@@ -28,12 +28,6 @@ typedef __signed__ long saddr_t;
  */
 #ifdef __KERNEL__
 
-#ifndef __s390x__
-#define BITS_PER_LONG 32
-#else
-#define BITS_PER_LONG 64
-#endif
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma64_addr_t;
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 0235970278f..8377e91533d 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -131,7 +131,7 @@ static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
 
 #define put_user(x, ptr)					\
 ({								\
-	might_sleep();						\
+	might_fault();						\
 	__put_user(x, ptr);					\
 })
 
@@ -180,7 +180,7 @@ extern int __put_user_bad(void) __attribute__((noreturn));
 
 #define get_user(x, ptr)					\
 ({								\
-	might_sleep();						\
+	might_fault();						\
 	__get_user(x, ptr);					\
 })
 
@@ -231,7 +231,7 @@ __copy_to_user(void __user *to, const void *from, unsigned long n)
 static inline unsigned long __must_check
 copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = __copy_to_user(to, from, n);
 	return n;
@@ -282,7 +282,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
 	else
@@ -299,7 +299,7 @@ __copy_in_user(void __user *to, const void __user *from, unsigned long n)
 static inline unsigned long __must_check
 copy_in_user(void __user *to, const void __user *from, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (__access_ok(from,n) && __access_ok(to,n))
 		n = __copy_in_user(to, from, n);
 	return n;
@@ -312,7 +312,7 @@ static inline long __must_check
 strncpy_from_user(char *dst, const char __user *src, long count)
 {
         long res = -EFAULT;
-        might_sleep();
+	might_fault();
         if (access_ok(VERIFY_READ, src, 1))
 		res = uaccess.strncpy_from_user(count, src, dst);
         return res;
@@ -321,7 +321,7 @@ strncpy_from_user(char *dst, const char __user *src, long count)
 static inline unsigned long
 strnlen_user(const char __user * src, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	return uaccess.strnlen_user(n, src);
 }
 
@@ -354,7 +354,7 @@ __clear_user(void __user *to, unsigned long n)
 static inline unsigned long __must_check
 clear_user(void __user *to, unsigned long n)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = uaccess.clear_user(n, to);
 	return n;
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index f0f19e6ace6..c80602d7c88 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -267,7 +267,9 @@
 #define __NR_epoll_create1	327
 #define	__NR_preadv		328
 #define	__NR_pwritev		329
-#define NR_syscalls 330
+#define __NR_rt_tgsigqueueinfo	330
+#define __NR_perf_counter_open	331
+#define NR_syscalls 332
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 228e3105ded..c75ed43b1a1 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -3,8 +3,9 @@
 #
 
 ifdef CONFIG_FUNCTION_TRACER
-# Do not trace early boot code
+# Don't trace early setup code and tracing code
 CFLAGS_REMOVE_early.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
 #
@@ -22,7 +23,7 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o setup.o \
 	    processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
-	    vdso.o vtime.o sysinfo.o nmi.o
+	    vdso.o vtime.o sysinfo.o nmi.o sclp.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
@@ -41,6 +42,8 @@ obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 
 # Kexec part
 S390_KEXEC_OBJS := machine_kexec.o crash.o
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index fb38af6316b..88a83366819 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1823,3 +1823,20 @@ compat_sys_pwritev_wrapper:
 	llgfr	%r5,%r5			# u32
 	llgfr	%r6,%r6			# u32
 	jg	compat_sys_pwritev	# branch to system call
+
+	.globl	compat_sys_rt_tgsigqueueinfo_wrapper
+compat_sys_rt_tgsigqueueinfo_wrapper:
+	lgfr	%r2,%r2			# compat_pid_t
+	lgfr	%r3,%r3			# compat_pid_t
+	lgfr	%r4,%r4			# int
+	llgtr	%r5,%r5			# struct compat_siginfo *
+	jg	compat_sys_rt_tgsigqueueinfo_wrapper # branch to system call
+
+	.globl	sys_perf_counter_open_wrapper
+sys_perf_counter_open_wrapper:
+	llgtr	%r2,%r2			# const struct perf_counter_attr *
+	lgfr	%r3,%r3			# pid_t
+	lgfr	%r4,%r4			# int
+	lgfr	%r5,%r5			# int
+	llgfr	%r6,%r6			# unsigned long
+	jg	sys_perf_counter_open	# branch to system call
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index cf09948faad..fb263736826 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
+#include <linux/ftrace.h>
 #include <linux/lockdep.h>
 #include <linux/module.h>
 #include <linux/pfn.h>
@@ -410,5 +411,8 @@ void __init startup_init(void)
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
 	S390_lowcore.machine_flags = machine_flags;
+#ifdef CONFIG_DYNAMIC_FTRACE
+	S390_lowcore.ftrace_func = (unsigned long)ftrace_caller;
+#endif
 	lockdep_on();
 }
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index f3e27593421..c4c80a22bc1 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -53,6 +53,8 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
+_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
+		_TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
 
 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
 STACK_SIZE  = 1 << STACK_SHIFT
@@ -265,7 +267,7 @@ sysc_do_restart:
 	sth	%r7,SP_SVCNR(%r15)
 	sll	%r7,2		  # svc number *4
 	l	%r8,BASED(.Lsysc_table)
-	tm	__TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+2(%r9),_TIF_SYSCALL
 	l	%r8,0(%r7,%r8)	  # get system call addr.
 	bnz	BASED(sysc_tracesys)
 	basr	%r14,%r8	  # call sys_xxxx
@@ -405,7 +407,7 @@ sysc_tracego:
 	basr	%r14,%r8		# call sys_xxx
 	st	%r2,SP_R2(%r15)		# store return value
 sysc_tracenogo:
-	tm	__TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+2(%r9),_TIF_SYSCALL
 	bz	BASED(sysc_return)
 	l	%r1,BASED(.Ltrace_exit)
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
@@ -1107,6 +1109,7 @@ cleanup_io_leave_insn:
 
 		.section .rodata, "a"
 #define SYSCALL(esa,esame,emu)	.long esa
+	.globl	sys_call_table
 sys_call_table:
 #include "syscalls.S"
 #undef SYSCALL
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 84a105838e0..f6618e9e15e 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -56,6 +56,8 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
+_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
+		_TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
 
 #define BASED(name) name-system_call(%r13)
 
@@ -260,7 +262,7 @@ sysc_do_restart:
 	larl	%r10,sys_call_table_emu  # use 31 bit emulation system calls
 sysc_noemu:
 #endif
-	tm	__TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+6(%r9),_TIF_SYSCALL
 	lgf	%r8,0(%r7,%r10) # load address of system call routine
 	jnz	sysc_tracesys
 	basr	%r14,%r8	# call sys_xxxx
@@ -391,7 +393,7 @@ sysc_tracego:
 	basr	%r14,%r8		# call sys_xxx
 	stg	%r2,SP_R2(%r15)		# store return value
 sysc_tracenogo:
-	tm	__TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+	tm	__TI_flags+6(%r9),_TIF_SYSCALL
 	jz	sysc_return
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	larl	%r14,sysc_return	# return point is sysc_return
@@ -1058,6 +1060,7 @@ cleanup_io_leave_insn:
 
 		.section .rodata, "a"
 #define SYSCALL(esa,esame,emu)	.long esame
+	.globl	sys_call_table
 sys_call_table:
 #include "syscalls.S"
 #undef SYSCALL
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
new file mode 100644
index 00000000000..82ddfd3a75a
--- /dev/null
+++ b/arch/s390/kernel/ftrace.c
@@ -0,0 +1,260 @@
+/*
+ * Dynamic function tracer architecture backend.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <linux/hardirq.h>
+#include <linux/uaccess.h>
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <trace/syscall.h>
+#include <asm/lowcore.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+void ftrace_disable_code(void);
+void ftrace_disable_return(void);
+void ftrace_call_code(void);
+void ftrace_nop_code(void);
+
+#define FTRACE_INSN_SIZE 4
+
+#ifdef CONFIG_64BIT
+
+asm(
+	"	.align	4\n"
+	"ftrace_disable_code:\n"
+	"	j	0f\n"
+	"	.word	0x0024\n"
+	"	lg	%r1,"__stringify(__LC_FTRACE_FUNC)"\n"
+	"	basr	%r14,%r1\n"
+	"ftrace_disable_return:\n"
+	"	lg	%r14,8(15)\n"
+	"	lgr	%r0,%r0\n"
+	"0:\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_nop_code:\n"
+	"	j	.+"__stringify(MCOUNT_INSN_SIZE)"\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_call_code:\n"
+	"	stg	%r14,8(%r15)\n");
+
+#else /* CONFIG_64BIT */
+
+asm(
+	"	.align	4\n"
+	"ftrace_disable_code:\n"
+	"	j	0f\n"
+	"	l	%r1,"__stringify(__LC_FTRACE_FUNC)"\n"
+	"	basr	%r14,%r1\n"
+	"ftrace_disable_return:\n"
+	"	l	%r14,4(%r15)\n"
+	"	j	0f\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"	bcr	0,%r7\n"
+	"0:\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_nop_code:\n"
+	"	j	.+"__stringify(MCOUNT_INSN_SIZE)"\n");
+
+asm(
+	"	.align	4\n"
+	"ftrace_call_code:\n"
+	"	st	%r14,4(%r15)\n");
+
+#endif /* CONFIG_64BIT */
+
+static int ftrace_modify_code(unsigned long ip,
+			      void *old_code, int old_size,
+			      void *new_code, int new_size)
+{
+	unsigned char replaced[MCOUNT_INSN_SIZE];
+
+	/*
+	 * Note: Due to modules code can disappear and change.
+	 *  We need to protect against faulting as well as code
+	 *  changing. We do this by using the probe_kernel_*
+	 *  functions.
+	 *  This however is just a simple sanity check.
+	 */
+	if (probe_kernel_read(replaced, (void *)ip, old_size))
+		return -EFAULT;
+	if (memcmp(replaced, old_code, old_size) != 0)
+		return -EINVAL;
+	if (probe_kernel_write((void *)ip, new_code, new_size))
+		return -EPERM;
+	return 0;
+}
+
+static int ftrace_make_initial_nop(struct module *mod, struct dyn_ftrace *rec,
+				   unsigned long addr)
+{
+	return ftrace_modify_code(rec->ip,
+				  ftrace_call_code, FTRACE_INSN_SIZE,
+				  ftrace_disable_code, MCOUNT_INSN_SIZE);
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+		    unsigned long addr)
+{
+	if (addr == MCOUNT_ADDR)
+		return ftrace_make_initial_nop(mod, rec, addr);
+	return ftrace_modify_code(rec->ip,
+				  ftrace_call_code, FTRACE_INSN_SIZE,
+				  ftrace_nop_code, FTRACE_INSN_SIZE);
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	return ftrace_modify_code(rec->ip,
+				  ftrace_nop_code, FTRACE_INSN_SIZE,
+				  ftrace_call_code, FTRACE_INSN_SIZE);
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	ftrace_dyn_func = (unsigned long)func;
+	return 0;
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	*(unsigned long *)data = 0;
+	return 0;
+}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+/*
+ * Patch the kernel code at ftrace_graph_caller location:
+ * The instruction there is branch relative on condition. The condition mask
+ * is either all ones (always branch aka disable ftrace_graph_caller) or all
+ * zeroes (nop aka enable ftrace_graph_caller).
+ * Instruction format for brc is a7m4xxxx where m is the condition mask.
+ */
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned short opcode = 0xa704;
+
+	return probe_kernel_write(ftrace_graph_caller, &opcode, sizeof(opcode));
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned short opcode = 0xa7f4;
+
+	return probe_kernel_write(ftrace_graph_caller, &opcode, sizeof(opcode));
+}
+
+static inline unsigned long ftrace_mcount_call_adjust(unsigned long addr)
+{
+	return addr - (ftrace_disable_return - ftrace_disable_code);
+}
+
+#else /* CONFIG_DYNAMIC_FTRACE */
+
+static inline unsigned long ftrace_mcount_call_adjust(unsigned long addr)
+{
+	return addr - MCOUNT_OFFSET_RET;
+}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addresses
+ * in current thread info.
+ */
+unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
+{
+	struct ftrace_graph_ent trace;
+
+	/* Nmi's are currently unsupported. */
+	if (unlikely(in_nmi()))
+		goto out;
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		goto out;
+	if (ftrace_push_return_trace(parent, ip, &trace.depth) == -EBUSY)
+		goto out;
+	trace.func = ftrace_mcount_call_adjust(ip) & PSW_ADDR_INSN;
+	/* Only trace if the calling function expects to. */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		goto out;
+	}
+	parent = (unsigned long)return_to_handler;
+out:
+	return parent;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+extern unsigned long __start_syscalls_metadata[];
+extern unsigned long __stop_syscalls_metadata[];
+extern unsigned int sys_call_table[];
+
+static struct syscall_metadata **syscalls_metadata;
+
+struct syscall_metadata *syscall_nr_to_meta(int nr)
+{
+	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
+		return NULL;
+
+	return syscalls_metadata[nr];
+}
+
+static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
+{
+	struct syscall_metadata *start;
+	struct syscall_metadata *stop;
+	char str[KSYM_SYMBOL_LEN];
+
+	start = (struct syscall_metadata *)__start_syscalls_metadata;
+	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
+	kallsyms_lookup(syscall, NULL, NULL, NULL, str);
+
+	for ( ; start < stop; start++) {
+		if (start->name && !strcmp(start->name + 3, str + 3))
+			return start;
+	}
+	return NULL;
+}
+
+void arch_init_ftrace_syscalls(void)
+{
+	struct syscall_metadata *meta;
+	int i;
+	static atomic_t refs;
+
+	if (atomic_inc_return(&refs) != 1)
+		goto out;
+	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
+				    GFP_KERNEL);
+	if (!syscalls_metadata)
+		goto out;
+	for (i = 0; i < NR_syscalls; i++) {
+		meta = find_syscall_meta((unsigned long)sys_call_table[i]);
+		syscalls_metadata[i] = meta;
+	}
+	return;
+out:
+	atomic_dec(&refs);
+}
+#endif
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 22596d70fc2..ec688234852 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -1,7 +1,5 @@
 /*
- *  arch/s390/kernel/head.S
- *
- * Copyright (C) IBM Corp. 1999,2006
+ * Copyright IBM Corp. 1999,2009
  *
  *    Author(s): Hartmut Penner <hp@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -64,7 +62,7 @@ __HEAD
 	.org   0x100
 #
 # subroutine for loading from tape
-# Paramters:
+# Parameters:
 #  R1 = device number
 #  R2 = load address
 .Lloader:
@@ -479,27 +477,58 @@ startup:basr	%r13,0			# get base
 	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
 	mvc	__LC_EXIT_TIMER(8),5f-.LPG0(%r13)
 #ifndef CONFIG_MARCH_G5
-	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
-	stidp	__LC_CPUID		# store cpuid
-	lhi	%r0,(3f-2f) / 2
-	la	%r1,2f-.LPG0(%r13)
-0:	clc	__LC_CPUID+4(2),0(%r1)
-	jne	3f
-	lpsw	1f-.LPG0(13)		# machine type not good enough, crash
+	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
+	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
+	stfl	__LC_STFL_FAC_LIST	# store facility list
+	tm	__LC_STFL_FAC_LIST,0x01	# stfle available ?
+	jz	0f
+	la	%r0,0
+	.insn	s,0xb2b00000,__LC_STFL_FAC_LIST	# store facility list extended
+0:	l	%r0,__LC_STFL_FAC_LIST
+	n	%r0,2f+8-.LPG0(%r13)
+	cl	%r0,2f+8-.LPG0(%r13)
+	jne	1f
+	l	%r0,__LC_STFL_FAC_LIST+4
+	n	%r0,2f+12-.LPG0(%r13)
+	cl	%r0,2f+12-.LPG0(%r13)
+	je	3f
+1:	l	%r15,.Lstack-.LPG0(%r13)
+	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
+	ahi	%r15,-96
+	la	%r2,.Lals_string-.LPG0(%r13)
+	l	%r3,.Lsclp_print-.LPG0(%r13)
+	basr	%r14,%r3
+	lpsw	2f-.LPG0(%r13)		# machine type not good enough, crash
+.Lals_string:
+	.asciz	"The Linux kernel requires more recent processor hardware"
+.Lsclp_print:
+	.long	_sclp_print_early
+.Lstack:
+	.long	init_thread_union
 	.align 16
-1:	.long	0x000a0000,0x00000000
-2:
+2:	.long	0x000a0000,0x8badcccc
+#if defined(CONFIG_64BIT)
 #if defined(CONFIG_MARCH_Z10)
-	.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086, 0x2094, 0x2096
+	.long 0xc100efe3, 0xf0680000
 #elif defined(CONFIG_MARCH_Z9_109)
-	.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086
+	.long 0xc100efc3, 0x00000000
 #elif defined(CONFIG_MARCH_Z990)
-	.short 0x9672, 0x2064, 0x2066
+	.long 0xc0002000, 0x00000000
 #elif defined(CONFIG_MARCH_Z900)
-	.short 0x9672
+	.long 0xc0000000, 0x00000000
+#endif
+#else
+#if defined(CONFIG_MARCH_Z10)
+	.long 0x8100c880, 0x00000000
+#elif defined(CONFIG_MARCH_Z9_109)
+	.long 0x8100c880, 0x00000000
+#elif defined(CONFIG_MARCH_Z990)
+	.long 0x80002000, 0x00000000
+#elif defined(CONFIG_MARCH_Z900)
+	.long 0x80000000, 0x00000000
+#endif
 #endif
-3:	la	%r1,2(%r1)
-	brct	%r0,0b
+3:
 #endif
 
 	l	%r13,4f-.LPG0(%r13)
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index a01cf0284db..9bb2f6241d9 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -25,9 +25,9 @@
 #include <linux/preempt.h>
 #include <linux/stop_machine.h>
 #include <linux/kdebug.h>
+#include <linux/uaccess.h>
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
-#include <asm/uaccess.h>
 #include <linux/module.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
@@ -155,35 +155,8 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn)
 static int __kprobes swap_instruction(void *aref)
 {
 	struct ins_replace_args *args = aref;
-	u32 *addr;
-	u32 instr;
-	int err = -EFAULT;
 
-	/*
-	 * Text segment is read-only, hence we use stura to bypass dynamic
-	 * address translation to exchange the instruction. Since stura
-	 * always operates on four bytes, but we only want to exchange two
-	 * bytes do some calculations to get things right. In addition we
-	 * shall not cross any page boundaries (vmalloc area!) when writing
-	 * the new instruction.
-	 */
-	addr = (u32 *)((unsigned long)args->ptr & -4UL);
-	if ((unsigned long)args->ptr & 2)
-		instr = ((*addr) & 0xffff0000) | args->new;
-	else
-		instr = ((*addr) & 0x0000ffff) | args->new << 16;
-
-	asm volatile(
-		"	lra	%1,0(%1)\n"
-		"0:	stura	%2,%1\n"
-		"1:	la	%0,0\n"
-		"2:\n"
-		EX_TABLE(0b,2b)
-		: "+d" (err)
-		: "a" (addr), "d" (instr)
-		: "memory", "cc");
-
-	return err;
+	return probe_kernel_write(args->ptr, &args->new, sizeof(args->new));
 }
 
 void __kprobes arch_arm_kprobe(struct kprobe *p)
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 80641224a09..2a0a5e97ba8 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -1,5 +1,5 @@
 /*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
  *
@@ -7,36 +7,64 @@
 
 #include <asm/asm-offsets.h>
 
-#ifndef CONFIG_64BIT
-.globl _mcount
+	.globl ftrace_stub
+ftrace_stub:
+	br	%r14
+
+#ifdef CONFIG_64BIT
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	.globl _mcount
 _mcount:
-	stm	%r0,%r5,8(%r15)
-	st	%r14,56(%r15)
-	lr	%r1,%r15
-	ahi	%r15,-96
-	l	%r3,100(%r15)
-	la	%r2,0(%r14)
-	st	%r1,__SF_BACKCHAIN(%r15)
-	la	%r3,0(%r3)
-	bras	%r14,0f
-	.long	ftrace_trace_function
-0:	l	%r14,0(%r14)
-	l	%r14,0(%r14)
-	basr	%r14,%r14
-	ahi	%r15,96
-	lm	%r0,%r5,8(%r15)
-	l	%r14,56(%r15)
 	br	%r14
 
-.globl ftrace_stub
-ftrace_stub:
+	.globl ftrace_caller
+ftrace_caller:
+	larl	%r1,function_trace_stop
+	icm	%r1,0xf,0(%r1)
+	bnzr	%r14
+	stmg	%r2,%r5,32(%r15)
+	stg	%r14,112(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	lgr	%r2,%r14
+	lg	%r3,168(%r15)
+	larl	%r14,ftrace_dyn_func
+	lg	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	# This unconditional branch gets runtime patched. Change only if
+	# you know what you are doing. See ftrace_enable_graph_caller().
+	j	0f
+	lg	%r2,272(%r15)
+	lg	%r3,168(%r15)
+	brasl	%r14,prepare_ftrace_return
+	stg	%r2,168(%r15)
+0:
+#endif
+	aghi	%r15,160
+	lmg	%r2,%r5,32(%r15)
+	lg	%r14,112(%r15)
 	br	%r14
 
-#else /* CONFIG_64BIT */
+	.data
+	.globl	ftrace_dyn_func
+ftrace_dyn_func:
+	.quad	ftrace_stub
+	.previous
+
+#else /* CONFIG_DYNAMIC_FTRACE */
 
-.globl _mcount
+	.globl _mcount
 _mcount:
-	stmg	%r0,%r5,16(%r15)
+	larl	%r1,function_trace_stop
+	icm	%r1,0xf,0(%r1)
+	bnzr	%r14
+	stmg	%r2,%r5,32(%r15)
 	stg	%r14,112(%r15)
 	lgr	%r1,%r15
 	aghi	%r15,-160
@@ -46,13 +74,143 @@ _mcount:
 	larl	%r14,ftrace_trace_function
 	lg	%r14,0(%r14)
 	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	lg	%r2,272(%r15)
+	lg	%r3,168(%r15)
+	brasl	%r14,prepare_ftrace_return
+	stg	%r2,168(%r15)
+#endif
 	aghi	%r15,160
-	lmg	%r0,%r5,16(%r15)
+	lmg	%r2,%r5,32(%r15)
 	lg	%r14,112(%r15)
 	br	%r14
 
-.globl ftrace_stub
-ftrace_stub:
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+	.globl	return_to_handler
+return_to_handler:
+	stmg	%r2,%r5,32(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	brasl	%r14,ftrace_return_to_handler
+	aghi	%r15,160
+	lgr	%r14,%r2
+	lmg	%r2,%r5,32(%r15)
+	br	%r14
+
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#else /* CONFIG_64BIT */
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	.globl _mcount
+_mcount:
+	br	%r14
+
+	.globl ftrace_caller
+ftrace_caller:
+	stm	%r2,%r5,16(%r15)
+	bras	%r1,2f
+0:	.long	ftrace_trace_function
+1:	.long	function_trace_stop
+2:	l	%r2,1b-0b(%r1)
+	icm	%r2,0xf,0(%r2)
+	jnz	3f
+	st	%r14,56(%r15)
+	lr	%r0,%r15
+	ahi	%r15,-96
+	l	%r3,100(%r15)
+	la	%r2,0(%r14)
+	st	%r0,__SF_BACKCHAIN(%r15)
+	la	%r3,0(%r3)
+	l	%r14,0b-0b(%r1)
+	l	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	# This unconditional branch gets runtime patched. Change only if
+	# you know what you are doing. See ftrace_enable_graph_caller().
+	j	1f
+	bras	%r1,0f
+	.long	prepare_ftrace_return
+0:	l	%r2,152(%r15)
+	l	%r4,0(%r1)
+	l	%r3,100(%r15)
+	basr	%r14,%r4
+	st	%r2,100(%r15)
+1:
+#endif
+	ahi	%r15,96
+	l	%r14,56(%r15)
+3:	lm	%r2,%r5,16(%r15)
 	br	%r14
 
+	.data
+	.globl	ftrace_dyn_func
+ftrace_dyn_func:
+	.long	ftrace_stub
+	.previous
+
+#else /* CONFIG_DYNAMIC_FTRACE */
+
+	.globl _mcount
+_mcount:
+	stm	%r2,%r5,16(%r15)
+	bras	%r1,2f
+0:	.long	ftrace_trace_function
+1:	.long	function_trace_stop
+2:	l	%r2,1b-0b(%r1)
+	icm	%r2,0xf,0(%r2)
+	jnz	3f
+	st	%r14,56(%r15)
+	lr	%r0,%r15
+	ahi	%r15,-96
+	l	%r3,100(%r15)
+	la	%r2,0(%r14)
+	st	%r0,__SF_BACKCHAIN(%r15)
+	la	%r3,0(%r3)
+	l	%r14,0b-0b(%r1)
+	l	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	bras	%r1,0f
+	.long	prepare_ftrace_return
+0:	l	%r2,152(%r15)
+	l	%r4,0(%r1)
+	l	%r3,100(%r15)
+	basr	%r14,%r4
+	st	%r2,100(%r15)
+#endif
+	ahi	%r15,96
+	l	%r14,56(%r15)
+3:	lm	%r2,%r5,16(%r15)
+	br	%r14
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+	.globl	return_to_handler
+return_to_handler:
+	stm	%r2,%r5,16(%r15)
+	st	%r14,56(%r15)
+	lr	%r0,%r15
+	ahi	%r15,-96
+	st	%r0,__SF_BACKCHAIN(%r15)
+	bras	%r1,0f
+	.long	ftrace_return_to_handler
+0:	l	%r2,0b-0b(%r1)
+	basr	%r14,%r2
+	lr	%r14,%r2
+	ahi	%r15,96
+	lm	%r2,%r5,16(%r15)
+	br	%r14
+
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index eed4a00cb67..ab2e3ed28ab 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -56,8 +56,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 static void
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 28cf196ba77..015e27da40e 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -16,7 +16,7 @@
 #include <asm/lowcore.h>
 #include <asm/smp.h>
 #include <asm/etr.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/nmi.h>
 #include <asm/crw.h>
 
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index a3acd8e60af..355f7a30c3f 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -32,6 +32,7 @@
 #include <linux/elfcore.h>
 #include <linux/kernel_stat.h>
 #include <linux/syscalls.h>
+#include <asm/compat.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -204,7 +205,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	save_fp_regs(&p->thread.fp_regs);
 	/* Set a new TLS ?  */
 	if (clone_flags & CLONE_SETTLS) {
-		if (test_thread_flag(TIF_31BIT)) {
+		if (is_compat_task()) {
 			p->thread.acrs[0] = (unsigned int) regs->gprs[6];
 		} else {
 			p->thread.acrs[0] = (unsigned int)(regs->gprs[6] >> 32);
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 75c496f4f16..490b39934d6 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -36,7 +36,9 @@
 #include <linux/elf.h>
 #include <linux/regset.h>
 #include <linux/tracehook.h>
-
+#include <linux/seccomp.h>
+#include <trace/syscall.h>
+#include <asm/compat.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -69,7 +71,7 @@ FixPerRegisters(struct task_struct *task)
 	if (per_info->single_step) {
 		per_info->control_regs.bits.starting_addr = 0;
 #ifdef CONFIG_COMPAT
-		if (test_thread_flag(TIF_31BIT))
+		if (is_compat_task())
 			per_info->control_regs.bits.ending_addr = 0x7fffffffUL;
 		else
 #endif
@@ -482,8 +484,7 @@ static int peek_user_compat(struct task_struct *child,
 {
 	__u32 tmp;
 
-	if (!test_thread_flag(TIF_31BIT) ||
-	    (addr & 3) || addr > sizeof(struct user) - 3)
+	if (!is_compat_task() || (addr & 3) || addr > sizeof(struct user) - 3)
 		return -EIO;
 
 	tmp = __peek_user_compat(child, addr);
@@ -584,8 +585,7 @@ static int __poke_user_compat(struct task_struct *child,
 static int poke_user_compat(struct task_struct *child,
 			    addr_t addr, addr_t data)
 {
-	if (!test_thread_flag(TIF_31BIT) ||
-	    (addr & 3) || addr > sizeof(struct user32) - 3)
+	if (!is_compat_task() || (addr & 3) || addr > sizeof(struct user32) - 3)
 		return -EIO;
 
 	return __poke_user_compat(child, addr, data);
@@ -642,6 +642,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
 	long ret;
 
+	/* Do the secure computing check first. */
+	secure_computing(regs->gprs[2]);
+
 	/*
 	 * The sysc_tracesys code in entry.S stored the system
 	 * call number to gprs[2].
@@ -659,8 +662,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		ret = -1;
 	}
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+		ftrace_syscall_enter(regs);
+
 	if (unlikely(current->audit_context))
-		audit_syscall_entry(test_thread_flag(TIF_31BIT) ?
+		audit_syscall_entry(is_compat_task() ?
 					AUDIT_ARCH_S390 : AUDIT_ARCH_S390X,
 				    regs->gprs[2], regs->orig_gpr2,
 				    regs->gprs[3], regs->gprs[4],
@@ -674,6 +680,9 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]),
 				   regs->gprs[2]);
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+		ftrace_syscall_exit(regs);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
 }
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index a0d2d55d7fb..0de305b598c 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -10,10 +10,11 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/ftrace.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/lowcore.h>
 #include <asm/s390_ext.h>
 #include <asm/irq_regs.h>
@@ -112,7 +113,7 @@ int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
 	return 0;
 }
 
-void do_extint(struct pt_regs *regs, unsigned short code)
+void __irq_entry do_extint(struct pt_regs *regs, unsigned short code)
 {
         ext_int_info_t *p;
         int index;
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
new file mode 100644
index 00000000000..20639dfe0c4
--- /dev/null
+++ b/arch/s390/kernel/sclp.S
@@ -0,0 +1,327 @@
+/*
+ * Mini SCLP driver.
+ *
+ * Copyright IBM Corp. 2004,2009
+ *
+ *   Author(s):	Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>,
+ *		Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+LC_EXT_NEW_PSW		= 0x58			# addr of ext int handler
+LC_EXT_INT_PARAM	= 0x80			# addr of ext int parameter
+LC_EXT_INT_CODE		= 0x86			# addr of ext int code
+
+#
+# Subroutine which waits synchronously until either an external interruption
+# or a timeout occurs.
+#
+# Parameters:
+#   R2	= 0 for no timeout, non-zero for timeout in (approximated) seconds
+#
+# Returns:
+#   R2	= 0 on interrupt, 2 on timeout
+#   R3	= external interruption parameter if R2=0
+#
+
+.section ".init.text","ax"
+
+_sclp_wait_int:
+	stm	%r6,%r15,24(%r15)		# save registers
+	basr	%r13,0				# get base register
+.LbaseS1:
+	ahi	%r15,-96			# create stack frame
+	la	%r8,LC_EXT_NEW_PSW		# register int handler
+	mvc	.LoldpswS1-.LbaseS1(8,%r13),0(%r8)
+	mvc	0(8,%r8),.LextpswS1-.LbaseS1(%r13)
+	lhi	%r6,0x0200			# cr mask for ext int (cr0.54)
+	ltr	%r2,%r2
+	jz	.LsetctS1
+	ahi	%r6,0x0800			# cr mask for clock int (cr0.52)
+	stck	.LtimeS1-.LbaseS1(%r13)		# initiate timeout
+	al	%r2,.LtimeS1-.LbaseS1(%r13)
+	st	%r2,.LtimeS1-.LbaseS1(%r13)
+	sckc	.LtimeS1-.LbaseS1(%r13)
+
+.LsetctS1:
+	stctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)	# enable required interrupts
+	l	%r0,.LctlS1-.LbaseS1(%r13)
+	lhi	%r1,~(0x200 | 0x800)		# clear old values
+	nr	%r1,%r0
+	or	%r1,%r6				# set new value
+	st	%r1,.LctlS1-.LbaseS1(%r13)
+	lctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)
+	st	%r0,.LctlS1-.LbaseS1(%r13)
+	lhi	%r2,2				# return code for timeout
+.LloopS1:
+	lpsw	.LwaitpswS1-.LbaseS1(%r13)	# wait until interrupt
+.LwaitS1:
+	lh	%r7,LC_EXT_INT_CODE
+	chi	%r7,0x1004			# timeout?
+	je	.LtimeoutS1
+	chi	%r7,0x2401			# service int?
+	jne	.LloopS1
+	sr	%r2,%r2
+	l	%r3,LC_EXT_INT_PARAM
+.LtimeoutS1:
+	lctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)	# restore interrupt setting
+	# restore old handler
+	mvc	0(8,%r8),.LoldpswS1-.LbaseS1(%r13)
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14				# return to caller
+
+	.align	8
+.LoldpswS1:
+	.long	0, 0				# old ext int PSW
+.LextpswS1:
+	.long	0x00080000, 0x80000000+.LwaitS1	# PSW to handle ext int
+.LwaitpswS1:
+	.long	0x010a0000, 0x00000000+.LloopS1	# PSW to wait for ext int
+.LtimeS1:
+	.quad	0				# current time
+.LctlS1:
+	.long	0				# CT0 contents
+
+#
+# Subroutine to synchronously issue a service call.
+#
+# Parameters:
+#   R2	= command word
+#   R3	= sccb address
+#
+# Returns:
+#   R2	= 0 on success, 1 on failure
+#   R3	= sccb response code if R2 = 0
+#
+
+_sclp_servc:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	lr	%r6,%r2				# save command word
+	lr	%r7,%r3				# save sccb address
+.LretryS2:
+	lhi	%r2,1				# error return code
+	.insn	rre,0xb2200000,%r6,%r7		# servc
+	brc	1,.LendS2			# exit if not operational
+	brc	8,.LnotbusyS2			# go on if not busy
+	sr	%r2,%r2				# wait until no longer busy
+	bras	%r14,_sclp_wait_int
+	j	.LretryS2			# retry
+.LnotbusyS2:
+	sr	%r2,%r2				# wait until result
+	bras	%r14,_sclp_wait_int
+	sr	%r2,%r2
+	lh	%r3,6(%r7)
+.LendS2:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+
+#
+# Subroutine to set up the SCLP interface.
+#
+# Parameters:
+#   R2	= 0 to activate, non-zero to deactivate
+#
+# Returns:
+#   R2	= 0 on success, non-zero on failure
+#
+
+_sclp_setup:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	basr	%r13,0				# get base register
+.LbaseS3:
+	l	%r6,.LsccbS0-.LbaseS3(%r13)	# prepare init mask sccb
+	mvc	0(.LinitendS3-.LinitsccbS3,%r6),.LinitsccbS3-.LbaseS3(%r13)
+	ltr	%r2,%r2				# initialization?
+	jz	.LdoinitS3			# go ahead
+	# clear masks
+	xc	.LinitmaskS3-.LinitsccbS3(8,%r6),.LinitmaskS3-.LinitsccbS3(%r6)
+.LdoinitS3:
+	l	%r2,.LwritemaskS3-.LbaseS3(%r13)# get command word
+	lr	%r3,%r6				# get sccb address
+	bras	%r14,_sclp_servc		# issue service call
+	ltr	%r2,%r2				# servc successful?
+	jnz	.LerrorS3
+	chi	%r3,0x20			# write mask successful?
+	jne	.LerrorS3
+	# check masks
+	la	%r2,.LinitmaskS3-.LinitsccbS3(%r6)
+	l	%r1,0(%r2)			# receive mask ok?
+	n	%r1,12(%r2)
+	cl	%r1,0(%r2)
+	jne	.LerrorS3
+	l	%r1,4(%r2)			# send mask ok?
+	n	%r1,8(%r2)
+	cl	%r1,4(%r2)
+	sr	%r2,%r2
+	je	.LendS3
+.LerrorS3:
+	lhi	%r2,1				# error return code
+.LendS3:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+.LwritemaskS3:
+	.long	0x00780005			# SCLP command for write mask
+.LinitsccbS3:
+	.word	.LinitendS3-.LinitsccbS3
+	.byte	0,0,0,0
+	.word	0
+	.word	0
+	.word	4
+.LinitmaskS3:
+	.long	0x80000000
+	.long	0x40000000
+	.long	0
+	.long	0
+.LinitendS3:
+
+#
+# Subroutine which prints a given text to the SCLP console.
+#
+# Parameters:
+#   R2	= address of nil-terminated ASCII text
+#
+# Returns:
+#   R2	= 0 on success, 1 on failure
+#
+
+_sclp_print:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	basr	%r13,0				# get base register
+.LbaseS4:
+	l	%r8,.LsccbS0-.LbaseS4(%r13)	# prepare write data sccb
+	mvc	0(.LmtoS4-.LwritesccbS4,%r8),.LwritesccbS4-.LbaseS4(%r13)
+	la	%r7,.LmtoS4-.LwritesccbS4(%r8)	# current mto addr
+	sr	%r0,%r0
+	l	%r10,.Lascebc-.LbaseS4(%r13)	# address of translation table
+.LinitmtoS4:
+	# initialize mto
+	mvc	0(.LmtoendS4-.LmtoS4,%r7),.LmtoS4-.LbaseS4(%r13)
+	lhi	%r6,.LmtoendS4-.LmtoS4		# current mto length
+.LloopS4:
+	ic	%r0,0(%r2)			# get character
+	ahi	%r2,1
+	ltr	%r0,%r0				# end of string?
+	jz	.LfinalizemtoS4
+	chi	%r0,0x15			# end of line (NL)?
+	jz	.LfinalizemtoS4
+	stc	%r0,0(%r6,%r7)			# copy to mto
+	la	%r11,0(%r6,%r7)
+	tr	0(1,%r11),0(%r10)		# translate to EBCDIC
+	ahi	%r6,1
+	j	.LloopS4
+.LfinalizemtoS4:
+	sth	%r6,0(%r7)			# update mto length
+	lh	%r9,.LmdbS4-.LwritesccbS4(%r8)	# update mdb length
+	ar	%r9,%r6
+	sth	%r9,.LmdbS4-.LwritesccbS4(%r8)
+	lh	%r9,.LevbufS4-.LwritesccbS4(%r8)# update evbuf length
+	ar	%r9,%r6
+	sth	%r9,.LevbufS4-.LwritesccbS4(%r8)
+	lh	%r9,0(%r8)			# update sccb length
+	ar	%r9,%r6
+	sth	%r9,0(%r8)
+	ar	%r7,%r6				# update current mto adress
+	ltr	%r0,%r0				# more characters?
+	jnz	.LinitmtoS4
+	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
+	lr	%r3,%r8
+	bras	%r14,_sclp_servc
+	ltr	%r2,%r2				# servc successful?
+	jnz	.LendS4
+	chi	%r3,0x20			# write data successful?
+	je	.LendS4
+	lhi	%r2,1				# error return code
+.LendS4:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+
+#
+# Function which prints a given text to the SCLP console.
+#
+# Parameters:
+#   R2	= address of nil-terminated ASCII text
+#
+# Returns:
+#   R2	= 0 on success, 1 on failure
+#
+
+	.globl _sclp_print_early
+_sclp_print_early:
+	stm	%r6,%r15,24(%r15)		# save registers
+	ahi	%r15,-96			# create stack frame
+	lr	%r10,%r2			# save string pointer
+	lhi	%r2,0
+	bras	%r14,_sclp_setup		# enable console
+	ltr	%r2,%r2
+	jnz	.LendS5
+	lr	%r2,%r10
+	bras	%r14,_sclp_print		# print string
+	ltr	%r2,%r2
+	jnz	.LendS5
+	lhi	%r2,1
+	bras	%r14,_sclp_setup		# disable console
+.LendS5:
+	lm	%r6,%r15,120(%r15)		# restore registers
+	br	%r14
+
+.LwritedataS4:
+	.long	0x00760005			# SCLP command for write data
+.LwritesccbS4:
+	# sccb
+	.word	.LmtoS4-.LwritesccbS4
+	.byte	0
+	.byte	0,0,0
+	.word	0
+
+	# evbuf
+.LevbufS4:
+	.word	.LmtoS4-.LevbufS4
+	.byte	0x02
+	.byte	0
+	.word	0
+
+.LmdbS4:
+	# mdb
+	.word	.LmtoS4-.LmdbS4
+	.word	1
+	.long	0xd4c4c240
+	.long	1
+
+	# go
+.LgoS4:
+	.word	.LmtoS4-.LgoS4
+	.word	1
+	.long	0
+	.byte	0,0,0,0,0,0,0,0
+	.byte	0,0,0
+	.byte	0
+	.byte	0,0,0,0,0,0,0
+	.byte	0
+	.word	0
+	.byte	0,0,0,0,0,0,0,0,0,0
+	.byte	0,0,0,0,0,0,0,0
+	.byte	0,0,0,0,0,0,0,0
+
+.LmtoS4:
+	.word	.LmtoendS4-.LmtoS4
+	.word	4
+	.word	0x1000
+	.byte	0
+	.byte	0,0,0
+.LmtoendS4:
+
+	# Global constants
+.LsccbS0:
+	.long	_sclp_work_area
+.Lascebc:
+	.long	_ascebc
+.previous
+
+.section ".init.data","a"
+	.balign 4096
+_sclp_work_area:
+	.fill	4096
+.previous
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 7402b6a39ea..9717717c6fe 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -42,6 +42,7 @@
 #include <linux/ctype.h>
 #include <linux/reboot.h>
 #include <linux/topology.h>
+#include <linux/ftrace.h>
 
 #include <asm/ipl.h>
 #include <asm/uaccess.h>
@@ -442,6 +443,7 @@ setup_lowcore(void)
 	lc->steal_timer = S390_lowcore.steal_timer;
 	lc->last_update_timer = S390_lowcore.last_update_timer;
 	lc->last_update_clock = S390_lowcore.last_update_clock;
+	lc->ftrace_func = S390_lowcore.ftrace_func;
 	set_prefix((u32)(unsigned long) lc);
 	lowcore_ptr[0] = lc;
 }
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 3cf74c3ccb6..062bd64e65f 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -26,6 +26,7 @@
 #include <linux/binfmts.h>
 #include <linux/tracehook.h>
 #include <linux/syscalls.h>
+#include <linux/compat.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
@@ -482,7 +483,7 @@ void do_signal(struct pt_regs *regs)
 		/* Whee!  Actually deliver the signal.  */
 		int ret;
 #ifdef CONFIG_COMPAT
-		if (test_thread_flag(TIF_31BIT)) {
+		if (is_compat_task()) {
 			ret = handle_signal32(signr, &ka, &info, oldset, regs);
 	        }
 		else
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index a985a3ba440..cc8c484984e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -47,7 +47,7 @@
 #include <asm/timer.h>
 #include <asm/lowcore.h>
 #include <asm/sclp.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/vdso.h>
 #include "entry.h"
 
@@ -572,6 +572,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
 	cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
+	cpu_lowcore->ftrace_func = S390_lowcore.ftrace_func;
 	eieio();
 
 	while (signal_processor(cpu, sigp_restart) == sigp_busy)
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 2c7739fe70b..ad1acd20038 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -338,3 +338,5 @@ SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
 SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
 SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
 SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
+SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
+SYSCALL(sys_perf_counter_open,sys_perf_counter_open,sys_perf_counter_open_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ef596d02057..215330a2c12 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -70,7 +70,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
 {
 	return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
 }
@@ -95,12 +95,6 @@ void tod_to_timeval(__u64 todval, struct timespec *xtime)
 	xtime->tv_nsec = ((todval * 1000) >> 12);
 }
 
-#ifdef CONFIG_PROFILING
-#define s390_do_profile()	profile_tick(CPU_PROFILING)
-#else
-#define s390_do_profile()	do { ; } while(0)
-#endif /* CONFIG_PROFILING */
-
 void clock_comparator_work(void)
 {
 	struct clock_event_device *cd;
@@ -109,7 +103,6 @@ void clock_comparator_work(void)
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	cd = &__get_cpu_var(comparators);
 	cd->event_handler(cd);
-	s390_do_profile();
 }
 
 /*
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 89b2e7f1b7a..45e1708b70f 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-
+#include <linux/compat.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/processor.h>
@@ -53,8 +53,19 @@ unsigned int __read_mostly vdso_enabled = 1;
 
 static int __init vdso_setup(char *s)
 {
-	vdso_enabled = simple_strtoul(s, NULL, 0);
-	return 1;
+	unsigned long val;
+	int rc;
+
+	rc = 0;
+	if (strncmp(s, "on", 3) == 0)
+		vdso_enabled = 1;
+	else if (strncmp(s, "off", 4) == 0)
+		vdso_enabled = 0;
+	else {
+		rc = strict_strtoul(s, 0, &val);
+		vdso_enabled = rc ? 0 : !!val;
+	}
+	return !rc;
 }
 __setup("vdso=", vdso_setup);
 
@@ -203,7 +214,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	vdso_pagelist = vdso64_pagelist;
 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (test_thread_flag(TIF_31BIT)) {
+	if (is_compat_task()) {
 		vdso_pagelist = vdso32_pagelist;
 		vdso_pages = vdso32_pages;
 	}
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 89399b8756c..a53db23ee09 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -34,6 +34,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0x0700
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index c87f59bd824..c8eb7255332 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -23,7 +23,7 @@
 #include <asm/s390_ext.h>
 #include <asm/timer.h>
 #include <asm/irq_regs.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 
 static ext_int_info_t ext_int_info_timer;
 
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 9d19803111b..98997ccba50 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -154,17 +154,25 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 static int handle_validity(struct kvm_vcpu *vcpu)
 {
 	int viwhy = vcpu->arch.sie_block->ipb >> 16;
+	int rc;
+
 	vcpu->stat.exit_validity++;
-	if (viwhy == 0x37) {
-		fault_in_pages_writeable((char __user *)
-					 vcpu->kvm->arch.guest_origin +
-					 vcpu->arch.sie_block->prefix,
-					 PAGE_SIZE);
-		return 0;
-	}
-	VCPU_EVENT(vcpu, 2, "unhandled validity intercept code %d",
-		   viwhy);
-	return -ENOTSUPP;
+	if ((viwhy == 0x37) && (vcpu->arch.sie_block->prefix
+		<= vcpu->kvm->arch.guest_memsize - 2*PAGE_SIZE)){
+		rc = fault_in_pages_writeable((char __user *)
+			 vcpu->kvm->arch.guest_origin +
+			 vcpu->arch.sie_block->prefix,
+			 2*PAGE_SIZE);
+		if (rc)
+			/* user will receive sigsegv, exit to user */
+			rc = -ENOTSUPP;
+	} else
+		rc = -ENOTSUPP;
+
+	if (rc)
+		VCPU_EVENT(vcpu, 2, "unhandled validity intercept code %d",
+			   viwhy);
+	return rc;
 }
 
 static int handle_instruction(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 0189356fe20..f04f5301b1b 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -12,6 +12,8 @@
 
 #include <asm/lowcore.h>
 #include <asm/uaccess.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
 #include <linux/kvm_host.h>
 #include <linux/signal.h>
 #include "kvm-s390.h"
@@ -299,13 +301,13 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	}
 
 	if ((!rc) && atomic_read(&fi->active)) {
-		spin_lock_bh(&fi->lock);
+		spin_lock(&fi->lock);
 		list_for_each_entry(inti, &fi->list, list)
 			if (__interrupt_is_deliverable(vcpu, inti)) {
 				rc = 1;
 				break;
 			}
-		spin_unlock_bh(&fi->lock);
+		spin_unlock(&fi->lock);
 	}
 
 	if ((!rc) && (vcpu->arch.sie_block->ckc <
@@ -318,6 +320,12 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	return rc;
 }
 
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
+{
+	/* do real check here */
+	return 1;
+}
+
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return 0;
@@ -355,14 +363,12 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 		return 0;
 	}
 
-	sltime = (vcpu->arch.sie_block->ckc - now) / (0xf4240000ul / HZ) + 1;
+	sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9;
 
-	vcpu->arch.ckc_timer.expires = jiffies + sltime;
-
-	add_timer(&vcpu->arch.ckc_timer);
-	VCPU_EVENT(vcpu, 5, "enabled wait timer:%llx jiffies", sltime);
+	hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
+	VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime);
 no_timer:
-	spin_lock_bh(&vcpu->arch.local_int.float_int->lock);
+	spin_lock(&vcpu->arch.local_int.float_int->lock);
 	spin_lock_bh(&vcpu->arch.local_int.lock);
 	add_wait_queue(&vcpu->arch.local_int.wq, &wait);
 	while (list_empty(&vcpu->arch.local_int.list) &&
@@ -371,33 +377,46 @@ no_timer:
 		!signal_pending(current)) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		spin_unlock_bh(&vcpu->arch.local_int.lock);
-		spin_unlock_bh(&vcpu->arch.local_int.float_int->lock);
+		spin_unlock(&vcpu->arch.local_int.float_int->lock);
 		vcpu_put(vcpu);
 		schedule();
 		vcpu_load(vcpu);
-		spin_lock_bh(&vcpu->arch.local_int.float_int->lock);
+		spin_lock(&vcpu->arch.local_int.float_int->lock);
 		spin_lock_bh(&vcpu->arch.local_int.lock);
 	}
 	__unset_cpu_idle(vcpu);
 	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&vcpu->wq, &wait);
 	spin_unlock_bh(&vcpu->arch.local_int.lock);
-	spin_unlock_bh(&vcpu->arch.local_int.float_int->lock);
-	del_timer(&vcpu->arch.ckc_timer);
+	spin_unlock(&vcpu->arch.local_int.float_int->lock);
+	hrtimer_try_to_cancel(&vcpu->arch.ckc_timer);
 	return 0;
 }
 
-void kvm_s390_idle_wakeup(unsigned long data)
+void kvm_s390_tasklet(unsigned long parm)
 {
-	struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data;
+	struct kvm_vcpu *vcpu = (struct kvm_vcpu *) parm;
 
-	spin_lock_bh(&vcpu->arch.local_int.lock);
+	spin_lock(&vcpu->arch.local_int.lock);
 	vcpu->arch.local_int.timer_due = 1;
 	if (waitqueue_active(&vcpu->arch.local_int.wq))
 		wake_up_interruptible(&vcpu->arch.local_int.wq);
-	spin_unlock_bh(&vcpu->arch.local_int.lock);
+	spin_unlock(&vcpu->arch.local_int.lock);
 }
 
+/*
+ * low level hrtimer wake routine. Because this runs in hardirq context
+ * we schedule a tasklet to do the real work.
+ */
+enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer)
+{
+	struct kvm_vcpu *vcpu;
+
+	vcpu = container_of(timer, struct kvm_vcpu, arch.ckc_timer);
+	tasklet_schedule(&vcpu->arch.tasklet);
+
+	return HRTIMER_NORESTART;
+}
 
 void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 {
@@ -436,7 +455,7 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 	if (atomic_read(&fi->active)) {
 		do {
 			deliver = 0;
-			spin_lock_bh(&fi->lock);
+			spin_lock(&fi->lock);
 			list_for_each_entry_safe(inti, n, &fi->list, list) {
 				if (__interrupt_is_deliverable(vcpu, inti)) {
 					list_del(&inti->list);
@@ -447,7 +466,7 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 			}
 			if (list_empty(&fi->list))
 				atomic_set(&fi->active, 0);
-			spin_unlock_bh(&fi->lock);
+			spin_unlock(&fi->lock);
 			if (deliver) {
 				__do_deliver_interrupt(vcpu, inti);
 				kfree(inti);
@@ -512,7 +531,7 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 
 	mutex_lock(&kvm->lock);
 	fi = &kvm->arch.float_int;
-	spin_lock_bh(&fi->lock);
+	spin_lock(&fi->lock);
 	list_add_tail(&inti->list, &fi->list);
 	atomic_set(&fi->active, 1);
 	sigcpu = find_first_bit(fi->idle_mask, KVM_MAX_VCPUS);
@@ -529,7 +548,7 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 	if (waitqueue_active(&li->wq))
 		wake_up_interruptible(&li->wq);
 	spin_unlock_bh(&li->lock);
-	spin_unlock_bh(&fi->lock);
+	spin_unlock(&fi->lock);
 	mutex_unlock(&kvm->lock);
 	return 0;
 }
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index f4d56e9939c..c18b21d6991 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/err.h>
 #include <linux/fs.h>
+#include <linux/hrtimer.h>
 #include <linux/init.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
@@ -195,6 +196,10 @@ out_nokvm:
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	VCPU_EVENT(vcpu, 3, "%s", "free cpu");
+	if (vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda ==
+		(__u64) vcpu->arch.sie_block)
+		vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda = 0;
+	smp_mb();
 	free_page((unsigned long)(vcpu->arch.sie_block));
 	kvm_vcpu_uninit(vcpu);
 	kfree(vcpu);
@@ -283,8 +288,10 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
-	setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup,
-		 (unsigned long) vcpu);
+	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
+		     (unsigned long) vcpu);
+	vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup;
 	get_cpu_id(&vcpu->arch.cpu_id);
 	vcpu->arch.cpu_id.version = 0xff;
 	return 0;
@@ -307,19 +314,21 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 
 	vcpu->arch.sie_block->icpua = id;
 	BUG_ON(!kvm->arch.sca);
-	BUG_ON(kvm->arch.sca->cpu[id].sda);
-	kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block;
+	if (!kvm->arch.sca->cpu[id].sda)
+		kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block;
+	else
+		BUG_ON(!kvm->vcpus[id]); /* vcpu does already exist */
 	vcpu->arch.sie_block->scaoh = (__u32)(((__u64)kvm->arch.sca) >> 32);
 	vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
 
 	spin_lock_init(&vcpu->arch.local_int.lock);
 	INIT_LIST_HEAD(&vcpu->arch.local_int.list);
 	vcpu->arch.local_int.float_int = &kvm->arch.float_int;
-	spin_lock_bh(&kvm->arch.float_int.lock);
+	spin_lock(&kvm->arch.float_int.lock);
 	kvm->arch.float_int.local_int[id] = &vcpu->arch.local_int;
 	init_waitqueue_head(&vcpu->arch.local_int.wq);
 	vcpu->arch.local_int.cpuflags = &vcpu->arch.sie_block->cpuflags;
-	spin_unlock_bh(&kvm->arch.float_int.lock);
+	spin_unlock(&kvm->arch.float_int.lock);
 
 	rc = kvm_vcpu_init(vcpu, kvm, id);
 	if (rc)
@@ -478,6 +487,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	vcpu_load(vcpu);
 
+	/* verify, that memory has been registered */
+	if (!vcpu->kvm->arch.guest_memsize) {
+		vcpu_put(vcpu);
+		return -EINVAL;
+	}
+
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
@@ -497,7 +512,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		BUG();
 	}
 
-	might_sleep();
+	might_fault();
 
 	do {
 		__vcpu_run(vcpu);
@@ -657,6 +672,8 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 				struct kvm_memory_slot old,
 				int user_alloc)
 {
+	int i;
+
 	/* A few sanity checks. We can have exactly one memory slot which has
 	   to start at guest virtual zero and which has to be located at a
 	   page boundary in userland and which has to end at a page boundary.
@@ -664,7 +681,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	   vmas. It is okay to mmap() and munmap() stuff in this slot after
 	   doing this call at any time */
 
-	if (mem->slot)
+	if (mem->slot || kvm->arch.guest_memsize)
 		return -EINVAL;
 
 	if (mem->guest_phys_addr)
@@ -676,15 +693,39 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	if (mem->memory_size & (PAGE_SIZE - 1))
 		return -EINVAL;
 
+	if (!user_alloc)
+		return -EINVAL;
+
+	/* lock all vcpus */
+	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+		if (!kvm->vcpus[i])
+			continue;
+		if (!mutex_trylock(&kvm->vcpus[i]->mutex))
+			goto fail_out;
+	}
+
 	kvm->arch.guest_origin = mem->userspace_addr;
 	kvm->arch.guest_memsize = mem->memory_size;
 
-	/* FIXME: we do want to interrupt running CPUs and update their memory
-	   configuration now to avoid race conditions. But hey, changing the
-	   memory layout while virtual CPUs are running is usually bad
-	   programming practice. */
+	/* update sie control blocks, and unlock all vcpus */
+	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+		if (kvm->vcpus[i]) {
+			kvm->vcpus[i]->arch.sie_block->gmsor =
+				kvm->arch.guest_origin;
+			kvm->vcpus[i]->arch.sie_block->gmslm =
+				kvm->arch.guest_memsize +
+				kvm->arch.guest_origin +
+				VIRTIODESCSPACE - 1ul;
+			mutex_unlock(&kvm->vcpus[i]->mutex);
+		}
+	}
 
 	return 0;
+
+fail_out:
+	for (; i >= 0; i--)
+		mutex_unlock(&kvm->vcpus[i]->mutex);
+	return -EINVAL;
 }
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 00bbe69b78d..748fee87232 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -14,6 +14,7 @@
 #ifndef ARCH_S390_KVM_S390_H
 #define ARCH_S390_KVM_S390_H
 
+#include <linux/hrtimer.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 
@@ -41,7 +42,8 @@ static inline int __cpu_is_stopped(struct kvm_vcpu *vcpu)
 }
 
 int kvm_s390_handle_wait(struct kvm_vcpu *vcpu);
-void kvm_s390_idle_wakeup(unsigned long data);
+enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer);
+void kvm_s390_tasklet(unsigned long parm);
 void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu);
 int kvm_s390_inject_vm(struct kvm *kvm,
 		struct kvm_s390_interrupt *s390int);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 4b88834b8dd..93ecd06e1a7 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -204,11 +204,11 @@ static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 	int cpus = 0;
 	int n;
 
-	spin_lock_bh(&fi->lock);
+	spin_lock(&fi->lock);
 	for (n = 0; n < KVM_MAX_VCPUS; n++)
 		if (fi->local_int[n])
 			cpus++;
-	spin_unlock_bh(&fi->lock);
+	spin_unlock(&fi->lock);
 
 	/* deal with other level 3 hypervisors */
 	if (stsi(mem, 3, 2, 2) == -ENOSYS)
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index f27dbedf086..36678835034 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -52,7 +52,7 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
 	if (cpu_addr >= KVM_MAX_VCPUS)
 		return 3; /* not operational */
 
-	spin_lock_bh(&fi->lock);
+	spin_lock(&fi->lock);
 	if (fi->local_int[cpu_addr] == NULL)
 		rc = 3; /* not operational */
 	else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
@@ -64,7 +64,7 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
 		*reg |= SIGP_STAT_STOPPED;
 		rc = 1; /* status stored */
 	}
-	spin_unlock_bh(&fi->lock);
+	spin_unlock(&fi->lock);
 
 	VCPU_EVENT(vcpu, 4, "sensed status of cpu %x rc %x", cpu_addr, rc);
 	return rc;
@@ -86,7 +86,7 @@ static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr)
 
 	inti->type = KVM_S390_INT_EMERGENCY;
 
-	spin_lock_bh(&fi->lock);
+	spin_lock(&fi->lock);
 	li = fi->local_int[cpu_addr];
 	if (li == NULL) {
 		rc = 3; /* not operational */
@@ -102,7 +102,7 @@ static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr)
 	spin_unlock_bh(&li->lock);
 	rc = 0; /* order accepted */
 unlock:
-	spin_unlock_bh(&fi->lock);
+	spin_unlock(&fi->lock);
 	VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x", cpu_addr);
 	return rc;
 }
@@ -123,7 +123,7 @@ static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
 
 	inti->type = KVM_S390_SIGP_STOP;
 
-	spin_lock_bh(&fi->lock);
+	spin_lock(&fi->lock);
 	li = fi->local_int[cpu_addr];
 	if (li == NULL) {
 		rc = 3; /* not operational */
@@ -142,7 +142,7 @@ static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
 	spin_unlock_bh(&li->lock);
 	rc = 0; /* order accepted */
 unlock:
-	spin_unlock_bh(&fi->lock);
+	spin_unlock(&fi->lock);
 	VCPU_EVENT(vcpu, 4, "sent sigp stop to cpu %x", cpu_addr);
 	return rc;
 }
@@ -188,7 +188,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 	if (!inti)
 		return 2; /* busy */
 
-	spin_lock_bh(&fi->lock);
+	spin_lock(&fi->lock);
 	li = fi->local_int[cpu_addr];
 
 	if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) {
@@ -220,7 +220,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 out_li:
 	spin_unlock_bh(&li->lock);
 out_fi:
-	spin_unlock_bh(&fi->lock);
+	spin_unlock(&fi->lock);
 	return rc;
 }
 
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index e41f4008afc..f7e0d30250b 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -124,6 +124,27 @@ void _raw_read_lock_wait(raw_rwlock_t *rw)
 }
 EXPORT_SYMBOL(_raw_read_lock_wait);
 
+void _raw_read_lock_wait_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	unsigned int old;
+	int count = spin_retry;
+
+	local_irq_restore(flags);
+	while (1) {
+		if (count-- <= 0) {
+			_raw_yield();
+			count = spin_retry;
+		}
+		if (!__raw_read_can_lock(rw))
+			continue;
+		old = rw->lock & 0x7fffffffU;
+		local_irq_disable();
+		if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old)
+			return;
+	}
+}
+EXPORT_SYMBOL(_raw_read_lock_wait_flags);
+
 int _raw_read_trylock_retry(raw_rwlock_t *rw)
 {
 	unsigned int old;
@@ -157,6 +178,25 @@ void _raw_write_lock_wait(raw_rwlock_t *rw)
 }
 EXPORT_SYMBOL(_raw_write_lock_wait);
 
+void _raw_write_lock_wait_flags(raw_rwlock_t *rw, unsigned long flags)
+{
+	int count = spin_retry;
+
+	local_irq_restore(flags);
+	while (1) {
+		if (count-- <= 0) {
+			_raw_yield();
+			count = spin_retry;
+		}
+		if (!__raw_write_can_lock(rw))
+			continue;
+		local_irq_disable();
+		if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)
+			return;
+	}
+}
+EXPORT_SYMBOL(_raw_write_lock_wait_flags);
+
 int _raw_write_trylock_retry(raw_rwlock_t *rw)
 {
 	int count = spin_retry;
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index 2a745813454..db05661ac89 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux s390-specific parts of the memory manager.
 #
 
-obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o
+obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
 obj-$(CONFIG_CMM) += cmm.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 obj-$(CONFIG_PAGE_STATES) += page-states.o
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 833e8366c35..220a152c836 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
+#include <linux/compat.h>
 #include <linux/smp.h>
 #include <linux/kdebug.h>
 #include <linux/smp_lock.h>
@@ -239,7 +240,7 @@ static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
 	up_read(&mm->mmap_sem);
 	clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
 #ifdef CONFIG_COMPAT
-	compat = test_tsk_thread_flag(current, TIF_31BIT);
+	compat = is_compat_task();
 	if (compat && instruction == 0x0a77)
 		sys32_sigreturn();
 	else if (compat && instruction == 0x0aad)
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
new file mode 100644
index 00000000000..81756271dc4
--- /dev/null
+++ b/arch/s390/mm/maccess.c
@@ -0,0 +1,61 @@
+/*
+ * Access kernel memory without faulting -- s390 specific implementation.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+
+/*
+ * This function writes to kernel memory bypassing DAT and possible
+ * write protection. It copies one to four bytes from src to dst
+ * using the stura instruction.
+ * Returns the number of bytes copied or -EFAULT.
+ */
+static long probe_kernel_write_odd(void *dst, void *src, size_t size)
+{
+	unsigned long count, aligned;
+	int offset, mask;
+	int rc = -EFAULT;
+
+	aligned = (unsigned long) dst & ~3UL;
+	offset = (unsigned long) dst & 3;
+	count = min_t(unsigned long, 4 - offset, size);
+	mask = (0xf << (4 - count)) & 0xf;
+	mask >>= offset;
+	asm volatile(
+		"	bras	1,0f\n"
+		"	icm	0,0,0(%3)\n"
+		"0:	l	0,0(%1)\n"
+		"	lra	%1,0(%1)\n"
+		"1:	ex	%2,0(1)\n"
+		"2:	stura	0,%1\n"
+		"	la	%0,0\n"
+		"3:\n"
+		EX_TABLE(0b,3b) EX_TABLE(1b,3b) EX_TABLE(2b,3b)
+		: "+d" (rc), "+a" (aligned)
+		: "a" (mask), "a" (src) : "cc", "memory", "0", "1");
+	return rc ? rc : count;
+}
+
+long probe_kernel_write(void *dst, void *src, size_t size)
+{
+	long copied = 0;
+
+	while (size) {
+		copied = probe_kernel_write_odd(dst, src, size);
+		if (copied < 0)
+			break;
+		dst += copied;
+		src += copied;
+		size -= copied;
+	}
+	return copied < 0 ? -EFAULT : 0;
+}
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index e008d236cc1..f4558ccf02b 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <asm/pgalloc.h>
+#include <asm/compat.h>
 
 /*
  * Top of mmap area (just below the process stack).
@@ -55,7 +56,7 @@ static inline int mmap_is_legacy(void)
 	/*
 	 * Force standard allocation for 64 bit programs.
 	 */
-	if (!test_thread_flag(TIF_31BIT))
+	if (!is_compat_task())
 		return 1;
 #endif
 	return sysctl_legacy_va_layout ||
@@ -91,7 +92,7 @@ EXPORT_SYMBOL_GPL(arch_pick_mmap_layout);
 
 int s390_mmap_check(unsigned long addr, unsigned long len)
 {
-	if (!test_thread_flag(TIF_31BIT) &&
+	if (!is_compat_task() &&
 	    len >= TASK_SIZE && TASK_SIZE < (1UL << 53))
 		return crst_table_upgrade(current->mm, 1UL << 53);
 	return 0;
@@ -108,8 +109,7 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr,
 	area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
 	if (!(area & ~PAGE_MASK))
 		return area;
-	if (area == -ENOMEM &&
-	    !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < (1UL << 53)) {
 		/* Upgrade the page table to 4 levels and retry. */
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
@@ -131,8 +131,7 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
 	area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
 	if (!(area & ~PAGE_MASK))
 		return area;
-	if (area == -ENOMEM &&
-	    !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < (1UL << 53)) {
 		/* Upgrade the page table to 4 levels and retry. */
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index be6c1cf4ad5..4ca8e826bf3 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -1,7 +1,5 @@
 /*
- *  arch/s390/mm/pgtable.c
- *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007,2009
  *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
@@ -53,6 +51,18 @@ void clear_table_pgstes(unsigned long *table)
 
 #endif
 
+unsigned long VMALLOC_START = VMALLOC_END - VMALLOC_SIZE;
+EXPORT_SYMBOL(VMALLOC_START);
+
+static int __init parse_vmalloc(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+	VMALLOC_START = (VMALLOC_END - memparse(arg, &arg)) & PAGE_MASK;
+	return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+
 unsigned long *crst_table_alloc(struct mm_struct *mm, int noexec)
 {
 	struct page *page = alloc_pages(GFP_KERNEL, ALLOC_ORDER);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e7390dd0283..586cd045e2d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -15,6 +15,7 @@ config SUPERH
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
+	select RTC_LIB
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -74,14 +75,18 @@ config GENERIC_IOMAP
 	bool
 
 config GENERIC_TIME
-	def_bool n
+	def_bool y
 
 config GENERIC_CLOCKEVENTS
-	def_bool n
+	def_bool y
 
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 
+config GENERIC_CMOS_UPDATE
+	def_bool y
+	depends on SH_SH03 || SH_DREAMCAST
+
 config GENERIC_LOCKBREAK
 	def_bool y
 	depends on SMP && PREEMPT
@@ -112,6 +117,12 @@ config SYS_SUPPORTS_PCI
 config SYS_SUPPORTS_CMT
 	bool
 
+config SYS_SUPPORTS_MTU2
+	bool
+
+config SYS_SUPPORTS_TMU
+	bool
+
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -157,13 +168,14 @@ config CPU_SH3
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
+	select SYS_SUPPORTS_TMU
 
 config CPU_SH4
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
-	select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
 	select CPU_HAS_FPU if !CPU_SH4AL_DSP
+	select SYS_SUPPORTS_TMU
 
 config CPU_SH4A
 	bool
@@ -177,6 +189,7 @@ config CPU_SH4AL_DSP
 config CPU_SH5
 	bool
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_TMU
 
 config CPU_SHX2
 	bool
@@ -210,27 +223,32 @@ config CPU_SUBTYPE_SH7201
 	bool "Support SH7201 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_MTU2
  
 config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_MTU2
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
 	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_MTU2
 
 config CPU_SUBTYPE_SH7263
 	bool "Support SH7263 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_MTU2
 
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
 	select CPU_SH2A
+	select SYS_SUPPORTS_MTU2
 	help
 	  Select MX-G if running on an R8A03022BG part.
 
@@ -283,6 +301,7 @@ config CPU_SUBTYPE_SH7720
 	bool "Support SH7720 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
+	select SYS_SUPPORTS_CMT
 	help
 	  Select SH7720 if you have a SH3-DSP SH7720 CPU.
 
@@ -290,6 +309,7 @@ config CPU_SUBTYPE_SH7721
 	bool "Support SH7721 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
+	select SYS_SUPPORTS_CMT
 	help
 	  Select SH7721 if you have a SH3-DSP SH7721 CPU.
 
@@ -347,6 +367,16 @@ config CPU_SUBTYPE_SH7723
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
+config CPU_SUBTYPE_SH7724
+	bool "Support SH7724 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SHMOBILE
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_CMT
+	help
+	  Select SH7724 if you have an SH-MobileR2R CPU.
+
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
@@ -442,48 +472,26 @@ source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
-config SH_TMU
-	bool "TMU timer support"
-	depends on CPU_SH3 || CPU_SH4
+config SH_TIMER_TMU
+	bool "TMU timer driver"
+	depends on SYS_SUPPORTS_TMU
 	default y
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
 	help
-	  This enables the use of the TMU as the system timer.
+	  This enables the build of the TMU timer driver.
 
-config SH_CMT
-	bool "CMT timer support"
-	depends on SYS_SUPPORTS_CMT && CPU_SH2
+config SH_TIMER_CMT
+	bool "CMT timer driver"
+	depends on SYS_SUPPORTS_CMT
 	default y
 	help
-	  This enables the use of the CMT as the system timer.
+	  This enables build of the CMT timer driver.
 
-#
-# Support for the new-style CMT driver. This will replace SH_CMT
-# once its other dependencies are merged.
-#
-config SH_TIMER_CMT
-	bool "CMT clockevents driver"
-	depends on SYS_SUPPORTS_CMT && !SH_CMT
-	select GENERIC_CLOCKEVENTS
-
-config SH_MTU2
-	bool "MTU2 timer support"
-	depends on CPU_SH2A
+config SH_TIMER_MTU2
+	bool "MTU2 timer driver"
+	depends on SYS_SUPPORTS_MTU2
 	default y
 	help
-	  This enables the use of the MTU2 as the system timer.
-
-config SH_TIMER_IRQ
-	int
-	default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
-			CPU_SUBTYPE_SH7763
-	default "86" if CPU_SUBTYPE_SH7619
-	default "140" if CPU_SUBTYPE_SH7206
-	default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
-	default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
-	default "238" if CPU_SUBTYPE_MXG
-	default "16"
+	  This enables build of the MTU2 timer driver.
 
 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
@@ -494,7 +502,7 @@ config SH_PCLK_FREQ
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
 			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG    || \
-			      CPU_SUBTYPE_SH7786
+			      CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
@@ -503,6 +511,13 @@ config SH_PCLK_FREQ
 	  This is necessary for determining the reference clock value on
 	  platforms lacking an RTC.
 
+config SH_CLK_CPG
+	def_bool y
+
+config SH_CLK_CPG_LEGACY
+	depends on SH_CLK_CPG
+	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE
+
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"
 	depends on CPU_SH2
@@ -663,27 +678,54 @@ config GUSA_RB
 	  LLSC, this should be more efficient than the other alternative of
 	  disabling interrupts around the atomic sequence.
 
+config SPARSE_IRQ
+	bool "Support sparse irq numbering"
+	depends on EXPERIMENTAL
+	help
+	  This enables support for sparse irqs. This is useful in general
+	  as most CPUs have a fairly sparse array of IRQ vectors, which
+	  the irq_desc then maps directly on to. Systems with a high
+	  number of off-chip IRQs will want to treat this as
+	  experimental until they have been independently verified.
+
+	  If you don't know what to do here, say N.
+
 endmenu
 
 menu "Boot options"
 
 config ZERO_PAGE_OFFSET
-	hex "Zero page offset"
-	default "0x00004000" if SH_SH03
-	default "0x00010000" if PAGE_SIZE_64KB
+	hex
+	default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
+				SH_7751_SOLUTION_ENGINE
+	default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
 	default "0x00002000" if PAGE_SIZE_8KB
 	default "0x00001000"
 	help
 	  This sets the default offset of zero page.
 
 config BOOT_LINK_OFFSET
-	hex "Link address offset for booting"
+	hex
+	default "0x00210000" if SH_SHMIN
+	default "0x00400000" if SH_CAYMAN
+	default "0x00810000" if SH_7780_SOLUTION_ENGINE
+	default "0x009e0000" if SH_TITAN
+	default "0x01800000" if SH_SDK7780
+	default "0x02000000" if SH_EDOSK7760
 	default "0x00800000"
 	help
 	  This option allows you to set the link address offset of the zImage.
 	  This can be useful if you are on a board which has a small amount of
 	  memory.
 
+config ENTRY_OFFSET
+	hex
+	default "0x00001000" if PAGE_SIZE_4KB
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00004000" if PAGE_SIZE_16KB
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00000000"
+
 config UBC_WAKEUP
 	bool "Wakeup UBC on startup"
 	depends on CPU_SH4 && !CPU_SH4A
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index c7d704381a6..cd6e3ea598d 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -76,11 +76,6 @@ config SPECULATIVE_EXECUTION
 
 	  If unsure, say N.
 
-config SH64_USER_MISALIGNED_FIXUP
-	def_bool y
-	prompt "Fixup misaligned loads/stores occurring in user mode"
-	depends on SUPERH64
-
 config SH64_ID2815_WORKAROUND
 	bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
 	depends on CPU_SUBTYPE_SH5_101
@@ -101,9 +96,6 @@ config CPU_HAS_SR_RB
 	  See <file:Documentation/sh/register-banks.txt> for further
 	  information on SR.RB and register banking in the kernel in general.
 
-config CPU_HAS_PTEA
-	bool
-
 config CPU_HAS_PTEAEX
 	bool
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d62681f72a..8179cc9be9a 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -38,10 +38,10 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
 				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
 				CPU_SUBTYPE_SH7343
-	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
+	default "0xffe80000" if CPU_SH4
 	default "0x00000000"
 
 config EARLY_PRINTK
@@ -92,7 +92,7 @@ config 4KSTACKS
 
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
-	depends on DEBUG_KERNEL && SUPERH32
+	depends on DEBUG_KERNEL && SUPERH32 && BROKEN
 	help
 	  If you say Y here the kernel will use separate kernel stacks
 	  for handling hard and soft interrupts.  This can help avoid
@@ -122,27 +122,8 @@ config SH_NO_BSS_INIT
 	  For all other cases, say N. If this option seems perplexing, or
 	  you aren't sure, say N.
 
-config MORE_COMPILE_OPTIONS
-	bool "Add any additional compile options"
-	help
-	  If you want to add additional CFLAGS to the kernel build, enable this
-	  option and then enter what you would like to add in the next question.
-	  Note however that -g is already appended with the selection of KGDB.
-
-config COMPILE_OPTIONS
-	string "Additional compile arguments"
-	depends on MORE_COMPILE_OPTIONS
-
 config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
 	depends on SUPERH64
 
-config POOR_MANS_STRACE
-	bool "Debug: enable rudimentary strace facility"
-	depends on SUPERH64
-	help
-	  This option allows system calls to be traced to the console.  It also
-	  aids in detecting kernel stack underflow.  It is useful for debugging
-	  early-userland problems (e.g. init incurring fatal exceptions.)
-
 endmenu
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bece1f7535f..75d049b03f7 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -70,9 +70,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 cflags-y	+= $(call cc-option,-mno-fdpic)
 cflags-y	+= $(isaflags-y) -ffreestanding
 
-cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
-	$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
-
 OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 		   -R .stab -R .stabstr -S
 
@@ -85,7 +82,6 @@ defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG	:= shx3_defconfig
 KBUILD_IMAGE		:= $(defaultimage-y)
 
 #
@@ -93,26 +89,38 @@ KBUILD_IMAGE		:= $(defaultimage-y)
 # error messages during linking.
 #
 ifdef CONFIG_SUPERH32
-UTS_MACHINE	:= sh
-LDFLAGS_vmlinux	+= -e _stext
+UTS_MACHINE		:= sh
+BITS			:= 32
+LDFLAGS_vmlinux		+= -e _stext
+KBUILD_DEFCONFIG	:= shx3_defconfig
 else
-UTS_MACHINE	:= sh64
-LDFLAGS_vmlinux	+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
-		   --defsym phys_stext_shmedia=phys_stext+1 \
-		   -e phys_stext_shmedia
+UTS_MACHINE		:= sh64
+BITS			:= 64
+LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
+			   --defsym phys_stext_shmedia=phys_stext+1 \
+			   -e phys_stext_shmedia
+KBUILD_DEFCONFIG	:= cayman_defconfig
+endif
+
+ifneq ($(SUBARCH),$(ARCH))
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+  endif
 endif
 
 ifdef CONFIG_CPU_LITTLE_ENDIAN
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64'
+ld-bfd			:= elf32-$(UTS_MACHINE)-linux
+LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
 LDFLAGS			+= -EL
 else
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
+ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
+LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
 LDFLAGS			+= -EB
 endif
 
-head-y			:= arch/sh/kernel/init_task.o
-head-$(CONFIG_SUPERH32)	+= arch/sh/kernel/head_32.o
-head-$(CONFIG_SUPERH64)	+= arch/sh/kernel/head_64.o
+export ld-bfd BITS
+
+head-y	:= arch/sh/kernel/init_task.o arch/sh/kernel/head_$(BITS).o
 
 core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
@@ -193,10 +201,11 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: maketools arch/sh/lib64/syscalltab.h
+archprepare: maketools
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
 
 define archhelp
 	@echo '* zImage 	           - Compressed kernel image'
@@ -205,34 +214,4 @@ define archhelp
 	@echo '  uImage.srec  	           - Create an S-record for U-Boot'
 endef
 
-define filechk_gen-syscalltab
-       (set -e; \
-	echo "/*"; \
-	echo " * DO NOT MODIFY."; \
-	echo " *"; \
-	echo " * This file was generated by arch/sh/Makefile"; \
-	echo " * Any changes will be reverted at build time."; \
-	echo " */"; \
-	echo ""; \
-	echo "#ifndef __SYSCALLTAB_H"; \
-	echo "#define __SYSCALLTAB_H"; \
-	echo ""; \
-	echo "#include <linux/kernel.h>"; \
-	echo ""; \
-	echo "struct syscall_info {"; \
-	echo "	const char *name;"; \
-	echo "} syscall_info_table[] = {"; \
-	sed -e '/^.*\.long /!d;s//	{ "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \
-		s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \
-	echo "};"; \
-	echo ""; \
-	echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)";\
-	echo ""; \
-	echo "#endif /* __SYSCALLTAB_H */" )
-endef
-
-arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
-	$(call filechk,gen-syscalltab)
-
-CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-	       include/asm-sh/machtypes.h
+CLEAN_FILES += include/asm-sh/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index dcc1af8a2cf..1c91b1f565d 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -46,6 +46,15 @@ config SH_7722_SOLUTION_ENGINE
 	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 	  evaluation board.
 
+config SH_7724_SOLUTION_ENGINE
+	bool "SolutionEngine7724"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
+	  evaluation board.
+
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
 	select SOLUTION_ENGINE
@@ -121,7 +130,7 @@ config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
+	select IO_TRAPPED if MMU
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
@@ -145,13 +154,13 @@ config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
+	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
+	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 39e46919df1..1c4d83ef2a4 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -263,6 +263,9 @@ static int camera_probe(void)
 	struct i2c_msg msg;
 	int ret;
 
+	if (!a)
+		return -ENODEV;
+
 	camera_power(1);
 	msg.addr = 0x6e;
 	msg.buf = camera_ncm03j_magic;
@@ -532,6 +535,18 @@ static int __init ap325rxa_devices_setup(void)
 }
 device_initcall(ap325rxa_devices_setup);
 
+/* Return the board specific boot mode pin configuration */
+static int ap325rxa_mode_pins(void)
+{
+	/* MD0=0, MD1=0, MD2=0: Clock Mode 0
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN5 | MODE_PIN8;
+}
+
 static struct sh_machine_vector mv_ap325rxa __initmv = {
 	.mv_name = "AP-325RXA",
+	.mv_mode_pins = ap325rxa_mode_pins,
 };
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 6f94f17adc4..7be56fb06c1 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -2,12 +2,12 @@
  * Renesas Technology Corp. R0P7785LC0011RL Support.
  *
  * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/sm501.h>
@@ -19,8 +19,12 @@
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
 #include <linux/irq.h>
-#include <asm/heartbeat.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
 #include <mach/sh7785lcr.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <cpu/sh7785.h>
 
 /*
  * NOTE: This board has 2 physical memory maps.
@@ -273,6 +277,20 @@ void __init init_sh7785lcr_IRQ(void)
 	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
 }
 
+static int sh7785lcr_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
 static void sh7785lcr_power_off(void)
 {
 	unsigned char *p;
@@ -303,12 +321,34 @@ static void __init sh7785lcr_setup(char **cmdline_p)
 	writel(0x000307c2, sm501_reg);
 }
 
+/* Return the board specific boot mode pin configuration */
+static int sh7785lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S1 and S2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN4; /* Clock Mode 16 */
+	value |= MODE_PIN5; /* 32-bit Area0 bus width */
+	value |= MODE_PIN6; /* 32-bit Area0 bus width */
+	value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
+	value |= MODE_PIN8; /* Little Endian */
+	value |= MODE_PIN9; /* Master Mode */
+	value |= MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
 /*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_sh7785lcr __initmv = {
 	.mv_name		= "SH7785LCR",
 	.mv_setup		= sh7785lcr_setup,
+	.mv_clk_init		= sh7785lcr_clk_init,
 	.mv_init_irq		= init_sh7785lcr_IRQ,
+	.mv_mode_pins		= sh7785lcr_mode_pins,
 };
 
diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index cafe1ac3b29..00fa3eaecb1 100644
--- a/arch/sh/boards/mach-cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
@@ -1,4 +1,4 @@
 #
 # Makefile for the Hitachi Cayman specific parts of the kernel
 #
-obj-y := setup.o irq.o
+obj-y := setup.o irq.o panic.o
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index da62ad51699..33f77085631 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -142,26 +142,11 @@ int cayman_irq_demux(int evt)
 	return irq;
 }
 
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
-	if (irq < NR_INTC_IRQS) {
-		return intc_irq_describe(p, irq);
-	} else if (irq < NR_INTC_IRQS + 8) {
-		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
-	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
-		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
-	}
-
-	return 0;
-}
-#endif
-
 void init_cayman_irq(void)
 {
 	int i;
 
-	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
 	if (!epld_virt) {
 		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
 		return;
diff --git a/arch/sh/boards/mach-cayman/panic.c b/arch/sh/boards/mach-cayman/panic.c
new file mode 100644
index 00000000000..d1e67306d07
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/panic.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2003  Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <cpu/registers.h>
+
+/* THIS IS A PHYSICAL ADDRESS */
+#define HDSP2534_ADDR (0x04002100)
+
+static void poor_mans_delay(void)
+{
+	int i;
+
+	for (i = 0; i < 2500000; i++)
+		cpu_relax();
+}
+
+static void show_value(unsigned long x)
+{
+	int i;
+	unsigned nibble;
+	for (i = 0; i < 8; i++) {
+		nibble = ((x >> (i * 4)) & 0xf);
+
+		__raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
+			  HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
+	}
+}
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+	      unsigned long panicEXPEVT)
+{
+	while (1) {
+		/* This piece of code displays the PC on the LED display */
+		show_value(panicPC);
+		poor_mans_delay();
+		show_value(panicSSR);
+		poor_mans_delay();
+		show_value(panicEXPEVT);
+		poor_mans_delay();
+	}
+}
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
index e7f9cc5f2ff..7e8216ac31b 100644
--- a/arch/sh/boards/mach-cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -102,7 +102,7 @@ static int __init smsc_superio_setup(void)
 {
 	unsigned char devid, devrev;
 
-	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
 	if (!smsc_superio_virt) {
 		panic("Unable to remap SMSC SuperIO\n");
 	}
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index d1bee4884cd..ebe99227d4e 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -30,7 +30,6 @@
 
 extern struct irq_chip systemasic_int;
 extern void aica_time_init(void);
-extern int gapspci_init(void);
 extern int systemasic_irq_demux(int);
 
 static void __init dreamcast_setup(char **cmdline_p)
@@ -51,11 +50,6 @@ static void __init dreamcast_setup(char **cmdline_p)
 					 handle_level_irq);
 
 	board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
-	if (gapspci_init() < 0)
-		printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
 }
 
 static struct sh_machine_vector mv_dreamcast __initmv = {
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 1ee1de0bc1c..6ed401cd315 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -584,3 +584,22 @@ static int __init migor_devices_setup(void)
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int migor_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=0: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_mode_pins		= migor_mode_pins,
+};
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index c585be00956..a625ecb93e4 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -10,6 +10,9 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/ata_platform.h>
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -181,6 +184,50 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
+static struct mtd_partition r2d_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Environment",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(r2d_partitions),
+	.parts		= r2d_partitions,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
 static struct platform_device *rts7751r2d_devices[] __initdata = {
 	&sm501_device,
 	&heartbeat_device,
@@ -203,6 +250,9 @@ static int __init rts7751r2d_devices_setup(void)
 	if (register_trapped_io(&cf_trapped_io) == 0)
 		platform_device_register(&cf_ide_device);
 
+	if (mach_is_r2d_plus())
+		platform_device_register(&flash_device);
+
 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
 
 	return platform_add_devices(rts7751r2d_devices,
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
new file mode 100644
index 00000000000..349cbd6ce82
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
new file mode 100644
index 00000000000..f76cf3b49f2
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/sh/boards/se/7724/irq.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on  linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7724.h>
+
+struct fpga_irq {
+	unsigned long  sraddr;
+	unsigned long  mraddr;
+	unsigned short mask;
+	unsigned int   base;
+};
+
+static unsigned int fpga2irq(unsigned int irq)
+{
+	if (irq >= IRQ0_BASE &&
+	    irq <= IRQ0_END)
+		return IRQ0_IRQ;
+	else if (irq >= IRQ1_BASE &&
+		 irq <= IRQ1_END)
+		return IRQ1_IRQ;
+	else
+		return IRQ2_IRQ;
+}
+
+static struct fpga_irq get_fpga_irq(unsigned int irq)
+{
+	struct fpga_irq set;
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		set.sraddr = IRQ0_SR;
+		set.mraddr = IRQ0_MR;
+		set.mask   = IRQ0_MASK;
+		set.base   = IRQ0_BASE;
+		break;
+	case IRQ1_IRQ:
+		set.sraddr = IRQ1_SR;
+		set.mraddr = IRQ1_MR;
+		set.mask   = IRQ1_MASK;
+		set.base   = IRQ1_BASE;
+		break;
+	default:
+		set.sraddr = IRQ2_SR;
+		set.mraddr = IRQ2_MR;
+		set.mask   = IRQ2_MASK;
+		set.base   = IRQ2_BASE;
+		break;
+	}
+
+	return set;
+}
+
+static void disable_se7724_irq(unsigned int irq)
+{
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+}
+
+static void enable_se7724_irq(unsigned int irq)
+{
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+}
+
+static struct irq_chip se7724_irq_chip __read_mostly = {
+	.name           = "SE7724-FPGA",
+	.mask           = disable_se7724_irq,
+	.unmask         = enable_se7724_irq,
+	.mask_ack       = disable_se7724_irq,
+};
+
+static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct fpga_irq set = get_fpga_irq(irq);
+	unsigned short intv = ctrl_inw(set.sraddr);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = set.base;
+
+	intv &= set.mask;
+
+	while (intv) {
+		if (intv & 0x0001) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7724_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0xffff, IRQ0_MR);  /* mask all */
+	ctrl_outw(0xffff, IRQ1_MR);  /* mask all */
+	ctrl_outw(0xffff, IRQ2_MR);  /* mask all */
+	ctrl_outw(0x0000, IRQ0_SR);  /* clear irq */
+	ctrl_outw(0x0000, IRQ1_SR);  /* clear irq */
+	ctrl_outw(0x0000, IRQ2_SR);  /* clear irq */
+	ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
+
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
+					      &se7724_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ1_IRQ, se7724_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ2_IRQ, se7724_irq_demux);
+	set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
new file mode 100644
index 00000000000..9cd04bd558b
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -0,0 +1,448 @@
+/*
+ * linux/arch/sh/boards/se/7724/setup.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach-se/mach/se7724.h>
+
+/*
+ * SWx    1234 5678
+ * ------------------------------------
+ * SW31 : 1001 1100    : default
+ * SW32 : 0111 1111    : use on board flash
+ *
+ * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
+ *                          1 : Digital monitor
+ *                      b = 0 : VGA
+ *                          1 : SVGA
+ */
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x1a300300,
+		.end    = 0x1a30030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_SMC,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name	= "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 63,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode = SH_KEYSC_MODE_1,
+	.scan_timing = 10,
+	.delay = 50,
+	.keycodes = {
+		KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
+		KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
+		KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.start  = 0x1a204000,
+		.end    = 0x1a20400f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_KEY,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct platform_device *ms7724se_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&lcdc_device,
+	&nor_flash_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+};
+
+#define SW4140    0xBA201000
+#define FPGA_OUT  0xBA200400
+#define PORT_HIZA 0xA4050158
+
+#define SW41_A    0x0100
+#define SW41_B    0x0200
+#define SW41_C    0x0400
+#define SW41_D    0x0800
+#define SW41_E    0x1000
+#define SW41_F    0x2000
+#define SW41_G    0x4000
+#define SW41_H    0x8000
+static int __init devices_setup(void)
+{
+	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+
+	/* Reset Release */
+	ctrl_outw(ctrl_inw(FPGA_OUT) &
+		  ~((1 << 1)  | /* LAN */
+		    (1 << 6)  | /* VIDEO DAC */
+		    (1 << 12)), /* USB0 */
+		  FPGA_OUT);
+
+	/* enable IRQ 0,1,2 */
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ2, NULL);
+
+	/* enable SCIFA3 */
+	gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDRD,    NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN4,      NULL);
+	gpio_request(GPIO_FN_KEYIN3,      NULL);
+	gpio_request(GPIO_FN_KEYIN2,      NULL);
+	gpio_request(GPIO_FN_KEYIN1,      NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+
+	if (sw & SW41_B) {
+		/* SVGA */
+		lcdc_info.ch[0].lcd_cfg.xres         = 800;
+		lcdc_info.ch[0].lcd_cfg.yres         = 600;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+	} else {
+		/* VGA */
+		lcdc_info.ch[0].lcd_cfg.xres         = 640;
+		lcdc_info.ch[0].lcd_cfg.yres         = 480;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 105;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 50;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+	}
+
+	if (sw & SW41_A) {
+		/* Digital monitor */
+		lcdc_info.ch[0].interface_type = RGB18;
+		lcdc_info.ch[0].flags          = 0;
+	} else {
+		/* Analog monitor */
+		lcdc_info.ch[0].interface_type = RGB24;
+		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;
+	}
+
+	return platform_add_devices(ms7724se_devices,
+				ARRAY_SIZE(ms7724se_devices));
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ms7724se __initmv = {
+	.mv_name	= "ms7724se",
+	.mv_init_irq	= init_se7724_IRQ,
+	.mv_nr_irqs	= SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR,
+};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de..e6f4341bfe6 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
index 6287ae57031..6e75bd4459e 100644
--- a/arch/sh/boards/mach-se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -34,8 +34,6 @@ unsigned char sh7751se_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		return (*port2adr(port)) & 0xff;
 }
@@ -46,8 +44,6 @@ unsigned char sh7751se_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		v = (*port2adr(port)) & 0xff;
 	ctrl_delay();
@@ -58,8 +54,6 @@ unsigned short sh7751se_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -71,8 +65,6 @@ unsigned int sh7751se_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -85,8 +77,6 @@ void sh7751se_outb(unsigned char value, unsigned long port)
 
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
@@ -95,8 +85,6 @@ void sh7751se_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 	ctrl_delay();
@@ -106,8 +94,6 @@ void sh7751se_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
@@ -118,8 +104,6 @@ void sh7751se_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }
diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
deleted file mode 100644
index 203b2923fe7..00000000000
--- a/arch/sh/boards/mach-se/7751/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/pci.c
- *
- * Author:  Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF	0xBFFFFFFF
-#define PCIMCR_RFSH_OFF		0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description:  This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
-   unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
-   unsigned short bcr2;
-
-   /*
-    * Initialize the slave bus controller on the pcic.  The values used
-    * here should not be hardcoded, but they should be taken from the bsc
-    * on the processor, to make this function as generic as possible.
-    * (i.e. Another sbc may usr different SDRAM timing settings -- in order
-    * for the pcic to work, its settings need to be exactly the same.)
-    */
-   bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
-   bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
-   wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
-   wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
-   wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
-   mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
-   bcr1 = bcr1 | 0x00080000;  /* Enable Bit 19, BREQEN */
-   (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;   
-
-   bcr1 = bcr1 | 0x40080000;  /* Enable Bit 19 BREQEN, set PCIC to slave */
-   PCIC_WRITE(SH7751_PCIBCR1, bcr1);	 /* PCIC BCR1 */
-   PCIC_WRITE(SH7751_PCIBCR2, bcr2);     /* PCIC BCR2 */
-   PCIC_WRITE(SH7751_PCIWCR1, wcr1);     /* PCIC WCR1 */
-   PCIC_WRITE(SH7751_PCIWCR2, wcr2);     /* PCIC WCR2 */
-   PCIC_WRITE(SH7751_PCIWCR3, wcr3);     /* PCIC WCR3 */
-   mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
-   PCIC_WRITE(SH7751_PCIMCR, mcr);      /* PCIC MCR */
-
-
-   /* Enable all interrupts, so we know what to fix */
-   PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
-   PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
-   /* Set up standard PCI config registers */
-   PCIC_WRITE(SH7751_PCICONF1, 	0xF39000C7); /* Bus Master, Mem & I/O access */
-   PCIC_WRITE(SH7751_PCICONF2, 	0x00000000); /* PCI Class code & Revision ID */
-   PCIC_WRITE(SH7751_PCICONF4, 	0xab000001); /* PCI I/O address (local regs) */
-   PCIC_WRITE(SH7751_PCICONF5, 	0x0c000000); /* PCI MEM address (local RAM)  */
-   PCIC_WRITE(SH7751_PCICONF6, 	0xd0000000); /* PCI MEM address (unused)     */
-   PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
-   PCIC_WRITE(SH7751_PCILSR0, 0x03f00000);   /* MEM (full 64M exposed)       */
-   PCIC_WRITE(SH7751_PCILSR1, 0x00000000);   /* MEM (unused)                 */
-   PCIC_WRITE(SH7751_PCILAR0, 0x0c000000);   /* MEM (direct map from PCI)    */
-   PCIC_WRITE(SH7751_PCILAR1, 0x00000000);   /* MEM (unused)                 */
-
-   /* Now turn it on... */
-   PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
-   /*
-    * Set PCIMBR and PCIIOBR here, assuming a single window
-    * (16M MEM, 256K IO) is enough.  If a larger space is
-    * needed, the readx/writex and inx/outx functions will
-    * have to do more (e.g. setting registers for each call).
-    */
-
-   /*
-    * Set the MBR so PCI address is one-to-one with window,
-    * meaning all calls go straight through... use BUG_ON to
-    * catch erroneous assumption.
-    */
-   BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
-   PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
-   /* Set IOBR for window containing area specified in pci.h */
-   PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
-   /* All done, may as well say so... */
-   printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
-   return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
-        switch (slot) {
-        case 0: return 13;
-        case 1: return 13; 	/* AMD Ethernet controller */
-        case 2: return -1;
-        case 3: return -1;
-        case 4: return -1;
-        default:
-                printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
-                return -1;
-        }
-}
-
-static struct resource sh7751_io_resource = {
-	.name   = "SH7751 IO",
-	.start  = SH7751_PCI_IO_BASE,
-	.end    = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags  = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name   = "SH7751 mem",
-	.start  = SH7751_PCI_MEMORY_BASE,
-	.end    = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags  = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 66ad292c9fc..b8d43b638fc 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -12,10 +12,13 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/io.h>
 #include <mach-se/mach/se7780.h>
 
+#define INTC_BASE	0xffd00000
+#define INTC_ICR1	(INTC_BASE+0x1c)
+
 /*
  * Initialize IRQ setting
  */
@@ -43,4 +46,24 @@ void __init init_se7780_IRQ(void)
 	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
 	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+	/* ICR1: detect low level(for 2ndcut) */
+	ctrl_outl(0xAAAA0000, INTC_ICR1);
+
+	/*
+	 * FPGA PCISEL register initialize
+	 *
+	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
+	 *  -------------------------------------
+	 *  INTA || INTA  | INTD  |  --   | INTB
+	 *  -------------------------------------
+	 *  INTB || INTB  | INTA  |  --   | INTC
+	 *  -------------------------------------
+	 *  INTC || INTC  | INTB  | INTA  |  --
+	 *  -------------------------------------
+	 *  INTD || INTD  | INTC  |  --   | INTA
+	 *  -------------------------------------
+	 */
+	ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
+	ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
 }
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
index 2de42bae4b4..b537e238c6b 100644
--- a/arch/sh/boards/mach-se/Makefile
+++ b/arch/sh/boards/mach-se/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
 obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
 obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
+obj-$(CONFIG_SH_7724_SOLUTION_ENGINE)	+= 7724/
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266bb51c..a8b9f844ab5 100644
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
@@ -35,13 +35,13 @@
 #define RTC_BUSY	1
 #define RTC_STOP	2
 
-extern spinlock_t rtc_lock;
+static DEFINE_SPINLOCK(sh03_rtc_lock);
 
 unsigned long get_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
-	spin_lock(&rtc_lock);
+	spin_lock(&sh03_rtc_lock);
  again:
 	do {
 		sec  = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
@@ -73,7 +73,7 @@ unsigned long get_cmos_time(void)
 		goto again;
 	}
 
-	spin_unlock(&rtc_lock);
+	spin_unlock(&sh03_rtc_lock);
 	return mktime(year, mon, day, hour, min, sec);
 }
 
@@ -91,7 +91,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 	int i;
 
 	/* gets recalled with irq locally disabled */
-	spin_lock(&rtc_lock);
+	spin_lock(&sh03_rtc_lock);
 	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
 		if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
 			break;
@@ -113,7 +113,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 		       cmos_minutes, real_minutes);
 		retval = -1;
 	}
-	spin_unlock(&rtc_lock);
+	spin_unlock(&sh03_rtc_lock);
 
 	return retval;
 }
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f482426455..476650e42db 100644
--- a/arch/sh/boards/mach-snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
@@ -36,8 +36,6 @@ unsigned char snapgear_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		return (*port2adr(port)) & 0xff;
 }
@@ -48,8 +46,6 @@ unsigned char snapgear_inb_p(unsigned long port)
 
 	if (PXSEG(port))
 		v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		v = (*port2adr(port))&0xff;
 	ctrl_delay();
@@ -60,8 +56,6 @@ unsigned short snapgear_inw(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -73,8 +67,6 @@ unsigned int snapgear_inl(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -87,8 +79,6 @@ void snapgear_outb(unsigned char value, unsigned long port)
 
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
@@ -97,8 +87,6 @@ void snapgear_outb_p(unsigned char value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 	ctrl_delay();
@@ -108,8 +96,6 @@ void snapgear_outw(unsigned short value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
@@ -120,8 +106,6 @@ void snapgear_outl(unsigned int value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index dec3db0ee93..15577ff1f71 100644
--- a/arch/sh/boards/mach-systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
@@ -35,8 +35,6 @@ unsigned char sh7751systemh_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
 	else if (port <= 0x3F1)
 		return *(volatile unsigned char *)ETHER_IOMAP(port);
 	else
@@ -49,8 +47,6 @@ unsigned char sh7751systemh_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
 	else if (port <= 0x3F1)
 		v = *(volatile unsigned char *)ETHER_IOMAP(port);
 	else
@@ -63,8 +59,6 @@ unsigned short sh7751systemh_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else if (port <= 0x3F1)
@@ -78,8 +72,6 @@ unsigned int sh7751systemh_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else if (port <= 0x3F1)
@@ -94,8 +86,6 @@ void sh7751systemh_outb(unsigned char value, unsigned long port)
 
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
 	else
@@ -106,8 +96,6 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
 	else
@@ -119,8 +107,6 @@ void sh7751systemh_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else if (port <= 0x3F1)
@@ -133,8 +119,6 @@ void sh7751systemh_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4badad4c6f3..0130e9826ac 100644
--- a/arch/sh/boards/mach-titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
@@ -17,8 +17,6 @@ u8 titan_inb(unsigned long port)
 {
         if (PXSEG(port))
                 return ctrl_inb(port);
-        else if (is_pci_ioaddr(port))
-                return ctrl_inb(pci_ioaddr(port));
         return ctrl_inw(port2adr(port)) & 0xff;
 }
 
@@ -28,8 +26,6 @@ u8 titan_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = ctrl_inb(port);
-        else if (is_pci_ioaddr(port))
-                v = ctrl_inb(pci_ioaddr(port));
         else
                 v = ctrl_inw(port2adr(port)) & 0xff;
         ctrl_delay();
@@ -40,8 +36,6 @@ u16 titan_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return ctrl_inw(port);
-        else if (is_pci_ioaddr(port))
-                return ctrl_inw(pci_ioaddr(port));
         else if (port >= 0x2000)
                 return ctrl_inw(port2adr(port));
         else
@@ -53,8 +47,6 @@ u32 titan_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return ctrl_inl(port);
-        else if (is_pci_ioaddr(port))
-                return ctrl_inl(pci_ioaddr(port));
         else if (port >= 0x2000)
                 return ctrl_inw(port2adr(port));
         else
@@ -66,8 +58,6 @@ void titan_outb(u8 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outb(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outb(value, pci_ioaddr(port));
         else
                 ctrl_outw(value, port2adr(port));
 }
@@ -76,8 +66,6 @@ void titan_outb_p(u8 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outb(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outb(value, pci_ioaddr(port));
         else
                 ctrl_outw(value, port2adr(port));
         ctrl_delay();
@@ -87,8 +75,6 @@ void titan_outw(u16 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outw(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outw(value, pci_ioaddr(port));
         else if (port >= 0x2000)
                 ctrl_outw(value, port2adr(port));
         else
@@ -99,8 +85,6 @@ void titan_outl(u32 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outl(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outl(value, pci_ioaddr(port));
         else
                 maybebadio(port);
 }
@@ -117,10 +101,8 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
 {
-	if (PXSEG(port) || is_pci_memaddr(port))
+	if (PXSEG(port))
 		return (void __iomem *)port;
-	else if (is_pci_ioaddr(port))
-		return (void __iomem *)pci_ioaddr(port);
 
 	return (void __iomem *)port2adr(port);
 }
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 95483d16125..78efb04c28f 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,9 +20,6 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
-
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
 
@@ -43,6 +40,9 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_MEMORY_START)]')
 endif
 
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
+
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(KERNEL_MEMORY) + \
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index efb01dc3c8c..9531bf1b7c2 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -1,5 +1,47 @@
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/boot/compressed/Makefile_32
-else
-include ${srctree}/arch/sh/boot/compressed/Makefile_64
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
+		   head_$(BITS).o misc_$(BITS).o piggy.o
+
+OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
+
+ifdef CONFIG_SH_STANDARD_BIOS
+OBJECTS += $(obj)/../../kernel/sh_bios.o
 endif
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+#
+IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_PAGE_OFFSET)  + \
+			$(KERNEL_MEMORY) + \
+			$(CONFIG_BOOT_LINK_OFFSET)]')
+
+LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
+		   -T $(obj)/../../kernel/vmlinux.lds
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+	$(call if_changed,ld)
+	@:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+OBJCOPYFLAGS += -R .empty_zero_page
+
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
deleted file mode 100644
index b96a055b053..00000000000
--- a/arch/sh/boot/compressed/Makefile_32
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
-		   head_32.o misc_32.o piggy.o
-
-OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o
-
-ifdef CONFIG_SH_STANDARD_BIOS
-OBJECTS += $(obj)/../../kernel/sh_bios.o
-endif
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-#
-IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
-			$(CONFIG_BOOT_LINK_OFFSET)]')
-
-LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
-
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
-	$(call if_changed,ld)
-	@:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
deleted file mode 100644
index 658d4f91555..00000000000
--- a/arch/sh/boot/compressed/Makefile_64
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# arch/sh/boot/compressed/Makefile_64
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-# Copyright (C) 2002 Stuart Menefy
-# Copyright (C) 2004 Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
-		   head_64.o misc_64.o cache.o piggy.o
-
-OBJECTS		:= $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \
-		   $(obj)/cache.o
-
-#
-# ZIMAGE_OFFSET is the load offset of the compression loader
-# (4M for the kernel plus 64K for this loader)
-#
-ZIMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_PAGE_OFFSET)+0x400000+0x10000]')
-
-LDFLAGS_vmlinux := -Ttext $(ZIMAGE_OFFSET) -e startup \
-		    -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
-	$(call if_changed,ld)
-	@:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index 622eac3cf55..9993113c671 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,6 +14,7 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
+#include <asm/tlb.h>
 #include <cpu/mmu_context.h>
 #include <cpu/registers.h>
 
@@ -33,11 +34,7 @@
 #define	ICCR0_INIT_VAL	ICCR0_ON | ICCR0_ICI		/* ICE + ICI */
 #define	ICCR1_INIT_VAL	ICCR1_NOLOCK			/* No locking */
 
-#if 1
 #define	OCCR0_INIT_VAL	OCCR0_ON | OCCR0_OCI | OCCR0_WB	/* OCE + OCI + WB */
-#else
-#define	OCCR0_INIT_VAL	OCCR0_OFF
-#endif
 #define	OCCR1_INIT_VAL	OCCR1_NOLOCK			/* No locking */
 
 	.text
diff --git a/arch/sh/boot/compressed/vmlinux_64.lds b/arch/sh/boot/compressed/vmlinux_64.lds
deleted file mode 100644
index 59c2ef4aeda..00000000000
--- a/arch/sh/boot/compressed/vmlinux_64.lds
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * ld script to make compressed SuperH/shmedia Linux kernel+decompression
- *		bootstrap
- * Modified by Stuart Menefy from arch/sh/vmlinux.lds.S written by Niibe Yutaka
- */
-
-
-#ifdef CONFIG_LITTLE_ENDIAN
-/* OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux") */
-#define NOP 0x6ff0fff0
-#else
-/* OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64") */
-#define NOP 0xf0fff06f
-#endif
-
-OUTPUT_FORMAT("elf32-sh64-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-#define ALIGNED_GAP(section, align) (((ADDR(section)+SIZEOF(section)+(align)-1) & ~((align)-1))-ADDR(section))
-#define FOLLOWING(section, align) AT (LOADADDR(section) + ALIGNED_GAP(section,align))
-
-SECTIONS
-{
-  _text = .;			/* Text and read-only data */
-
-  .text : {
-	*(.text)
-	*(.text64)
-	*(.text..SHmedia32)
-	*(.fixup)
-	*(.gnu.warning)
-	} = NOP
-  . = ALIGN(4);
-  .rodata : { *(.rodata) }
-
-  /* There is no 'real' reason for eight byte alignment, four would work
-   * as well, but gdb downloads much (*4) faster with this.
-   */
-  . = ALIGN(8);
-  .image : { *(.image) }
-  . = ALIGN(4);
-  _etext = .;			/* End of text section */
-
-  .data :			/* Data */
-	FOLLOWING(.image, 4)
-	{
-	_data = .;
-	*(.data)
-	}
-  _data_image = LOADADDR(.data);/* Address of data section in ROM */
-
-  _edata = .;			/* End of data section */
-
-  .stack : { stack = .;  _stack = .; }
-
-  . = ALIGN(4);
-  __bss_start = .;		/* BSS */
-  .bss : {
-	*(.bss)
-	}
-  . = ALIGN(4);
-  _end = . ;
-}
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index f43d18373f2..a5ab2eccdaa 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -34,11 +34,6 @@ config HD64461_IRQ
 
 	  Do not change this unless you know what you are doing.
 
-config HD64461_IOBASE
-	hex "HD64461 start address"
-	depends on HD64461
-	default "0xb0000000"
-
 config HD64461_ENABLER
 	bool "HD64461 PCMCIA enabler"
 	depends on HD64461
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
index 25ef9106152..50aa0c1f76e 100644
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ b/arch/sh/cchips/hd6446x/hd64461.c
@@ -80,7 +80,7 @@ int __init setup_hd64461(void)
 
 	printk(KERN_INFO
 	       "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
-	       CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
+	       HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
 	       HD64461_IRQBASE + 15);
 
 /* Should be at processor specific part.. */
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index c8d982a8a2e..022f70e0ea0 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 17:46:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:42:06 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -74,6 +75,7 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,12 +94,15 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +163,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -168,8 +173,6 @@ CONFIG_CPU_SUBTYPE_SH7723=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -573,6 +576,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -695,6 +699,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
@@ -1030,6 +1035,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -1052,6 +1058,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1100,6 +1111,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1191,10 +1203,24 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1303,6 +1329,7 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index fa5fc1e1e98..40301f86a45 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 17:49:14 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:42:53 2009
 #
 CONFIG_SUPERH=y
 # CONFIG_SUPERH32 is not set
@@ -40,6 +40,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -70,6 +71,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -89,10 +91,13 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -105,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -127,39 +131,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # System type
 #
 CONFIG_CPU_SH5=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
 CONFIG_CPU_SUBTYPE_SH5_101=y
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -279,8 +250,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -492,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -568,6 +538,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -591,6 +562,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -779,6 +751,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1042,7 +1015,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1082,6 +1054,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1105,6 +1078,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1146,8 +1124,13 @@ CONFIG_MINIX_FS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1208,6 +1191,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1241,15 +1227,21 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1354,6 +1346,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 5c112364014..1f3cc98330b 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 17:51:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:44:27 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -71,6 +72,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -90,6 +92,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -98,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +160,7 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,8 +170,6 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -271,7 +274,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_SH_DMA_IRQ_MULTI=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 CONFIG_NR_DMA_CHANNELS_BOOL=y
 CONFIG_NR_DMA_CHANNELS=9
 # CONFIG_PVR2_DMA is not set
@@ -320,7 +323,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
 CONFIG_MAPLE=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -602,6 +604,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_MAPLE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -812,7 +815,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -867,6 +869,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -910,6 +917,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -947,10 +955,24 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1051,6 +1073,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index f4c34b03931..d7092457ddc 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 17:54:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:45:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -56,6 +57,7 @@ CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 # CONFIG_PRINTK is not set
 # CONFIG_BUG is not set
@@ -74,12 +76,15 @@ CONFIG_SHMEM=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -114,6 +119,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -123,8 +129,6 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -382,6 +386,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+
+#
 # Pseudo filesystems
 #
 # CONFIG_PROC_FS is not set
@@ -409,10 +417,22 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -426,6 +446,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 7825c2699f1..a822b1d8c11 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 17:54:57 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:45:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -40,6 +41,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -67,7 +69,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -77,6 +78,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -96,6 +98,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -103,6 +106,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,7 +120,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -161,6 +165,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7760=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -170,8 +175,6 @@ CONFIG_CPU_SUBTYPE_SH7760=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -815,6 +818,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -839,6 +843,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -883,6 +892,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -964,6 +974,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
@@ -1001,6 +1014,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1010,9 +1024,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1126,6 +1145,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index ebb4c37abaa..c5b50077913 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 17:58:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:46:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -78,6 +79,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +121,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -164,6 +167,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -173,8 +177,6 @@ CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -548,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -919,6 +922,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -943,6 +947,11 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -985,8 +994,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1075,11 +1089,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1179,6 +1207,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 82b113af08d..8e13027eecc 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:01:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:47:15 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -67,6 +68,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -85,12 +87,15 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -98,7 +103,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,6 +148,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -153,8 +158,6 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -385,6 +388,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -431,6 +435,7 @@ CONFIG_KEYBOARD_HP6XX=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -674,6 +679,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -719,6 +729,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -786,10 +797,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -898,6 +922,7 @@ CONFIG_CRYPTO_MD5=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index b6fa4a7599d..7f549aef0df 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:02:54 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:47:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -69,6 +70,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,6 +90,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -107,7 +112,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -162,8 +167,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -292,8 +295,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -602,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -706,6 +708,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -729,6 +732,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -922,6 +926,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_SOC_CAMERA is not set
 CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
 # CONFIG_USB_GSPCA is not set
 # CONFIG_VIDEO_HDPVR is not set
 CONFIG_VIDEO_USBVIDEO=m
@@ -994,15 +999,17 @@ CONFIG_USB_HID=m
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1197,6 +1204,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1222,6 +1230,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1270,10 +1283,15 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1364,10 +1382,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
@@ -1469,6 +1500,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index 92c515c4199..a7db539f280 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:06:51 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:48:54 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -69,6 +70,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,6 +90,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -107,7 +112,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -162,8 +167,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -293,8 +296,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -542,6 +543,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -702,6 +704,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -725,6 +728,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -931,7 +935,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1007,6 +1010,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1029,6 +1033,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1073,8 +1082,13 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1151,10 +1165,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
@@ -1256,6 +1283,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index 26586c2d64c..58bec61506f 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:07:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:49:32 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -39,6 +40,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -66,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -76,6 +77,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -94,6 +96,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -101,6 +104,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,7 +118,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +163,7 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -168,8 +173,6 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -813,6 +816,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -831,6 +835,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -884,6 +893,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -965,6 +975,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1000,6 +1011,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1008,9 +1020,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1035,6 +1052,7 @@ CONFIG_DUMP_CODE=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index 75178355d69..2886fc84bc1 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:11:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:50:51 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -74,6 +74,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,12 +93,15 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -105,7 +109,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +154,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -160,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH4_202=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -647,6 +649,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -669,6 +672,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -715,6 +723,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -802,10 +811,24 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -914,6 +937,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index a8720f9c604..8ecceb4bf27 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:14:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:51:34 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -67,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -76,6 +76,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -104,6 +105,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,7 +118,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +167,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -174,8 +177,6 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -577,6 +578,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -873,7 +875,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1012,6 +1013,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1056,6 +1062,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1105,11 +1112,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1218,6 +1239,7 @@ CONFIG_CRYPTO_WORKQUEUE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index df2d177d534..2b950728618 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:16:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:52:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -40,6 +41,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -76,6 +78,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -94,6 +97,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -101,6 +105,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,7 +119,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -168,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -778,6 +782,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -831,6 +840,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -874,6 +884,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -914,6 +927,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -923,9 +937,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -950,6 +969,7 @@ CONFIG_DUMP_CODE=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 7def4df46dd..943da63a385 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:20:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:53:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -78,6 +79,7 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -107,6 +109,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
@@ -118,7 +122,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +168,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -174,8 +178,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -258,7 +260,7 @@ CONFIG_SH_R7780MP=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
-CONFIG_SH_PCLK_FREQ=32000000
+CONFIG_SH_PCLK_FREQ=33333333
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -313,8 +315,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -536,6 +536,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -696,6 +697,7 @@ CONFIG_E1000=m
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -719,6 +721,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -920,6 +923,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1027,7 +1031,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1120,6 +1123,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1143,6 +1147,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1191,6 +1200,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1279,6 +1289,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1316,6 +1329,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1325,11 +1339,16 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1449,6 +1468,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index cb134ffc211..82658f67239 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:24:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:55:10 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -43,6 +44,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -78,6 +80,7 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -108,6 +111,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -120,7 +125,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,6 +172,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -177,8 +182,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -266,7 +269,7 @@ CONFIG_SH_R7785RP=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
-CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -337,8 +340,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
@@ -561,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -698,6 +700,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -721,6 +724,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -948,6 +952,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -970,6 +975,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1109,7 +1115,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1202,6 +1207,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1225,6 +1231,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1273,6 +1284,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1359,6 +1371,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1401,6 +1414,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1410,11 +1424,16 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1534,6 +1553,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index a037c744b79..fa4395768d1 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:29:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:56:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -74,6 +74,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -100,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -110,7 +113,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7201=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -166,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7201=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -603,6 +604,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -651,8 +657,13 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -686,11 +697,24 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -705,6 +729,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 9ae28e88426..e3a65f819f0 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:30:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:57:06 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -39,6 +40,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -70,7 +72,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -80,6 +81,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -116,7 +120,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +166,7 @@ CONFIG_CPU_SUBTYPE_SH7203=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -172,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7203=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -750,15 +752,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -874,6 +878,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
 
 #
 # LED Triggers
@@ -882,6 +887,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
@@ -951,6 +957,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -989,8 +1000,13 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1033,6 +1049,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1076,6 +1095,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1083,11 +1103,16 @@ CONFIG_TRACING=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1111,6 +1136,7 @@ CONFIG_DUMP_CODE=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index c0f741af6da..a4a59f6205a 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:33:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:58:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -70,6 +71,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,7 +114,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -302,8 +304,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -513,6 +513,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -672,6 +673,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -695,6 +697,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -793,6 +796,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=1
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
@@ -1079,15 +1083,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1291,6 +1297,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1337,6 +1348,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1417,11 +1429,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1524,6 +1550,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 8feef629e49..a860435b884 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:34:12 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:59:01 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -70,6 +71,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,7 +114,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -302,8 +304,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -424,7 +424,92 @@ CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
@@ -513,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -672,6 +758,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -695,6 +782,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -793,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=1
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
@@ -1079,15 +1168,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1291,6 +1382,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1337,6 +1433,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1417,11 +1514,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1524,6 +1635,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 739e2299ae8..a629b79a184 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:34:43 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:59:32 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -41,6 +42,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -73,6 +75,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,6 +96,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -100,6 +104,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -112,7 +118,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +164,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -168,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -310,8 +314,6 @@ CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/n
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
@@ -646,6 +648,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -1091,15 +1094,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1257,6 +1262,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1281,6 +1287,11 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1331,6 +1342,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1418,6 +1430,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
@@ -1455,6 +1470,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1464,9 +1480,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1580,6 +1601,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index d30e0a7ad9f..5caf85a3312 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:39:37 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:01:02 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -40,6 +41,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -63,6 +65,7 @@ CONFIG_CGROUP_DEBUG=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_FREEZER is not set
 CONFIG_CGROUP_DEVICE=y
+# CONFIG_CPUSETS is not set
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_MEM_RES_CTLR=y
@@ -80,7 +83,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -90,6 +92,7 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,6 +119,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -127,7 +132,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -174,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -183,8 +188,6 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -746,6 +749,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -785,8 +793,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -831,6 +844,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -869,6 +885,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -876,11 +893,16 @@ CONFIG_TRACING=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -991,6 +1013,7 @@ CONFIG_CRYPTO_LZO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index fbb72d029e6..004d531716d 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:42:00 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:01:44 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -40,6 +41,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -73,6 +75,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -91,6 +94,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -98,6 +102,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
@@ -109,7 +115,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +163,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -167,8 +173,6 @@ CONFIG_ARCH_SHMOBILE=y
 CONFIG_CPU_SUBTYPE_SH7343=y
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -769,6 +773,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_SOC_CAMERA is not set
 CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
 # CONFIG_USB_STV06XX is not set
@@ -800,6 +805,7 @@ CONFIG_USB_GSPCA=m
 # CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_HDPVR is not set
 # CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
 # CONFIG_VIDEO_USBVISION is not set
 # CONFIG_USB_VICAM is not set
 # CONFIG_USB_IBMCAM is not set
@@ -813,6 +819,7 @@ CONFIG_USB_GSPCA=m
 # CONFIG_USB_STV680 is not set
 # CONFIG_USB_ZC0301 is not set
 # CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
 # CONFIG_USB_ZR364XX is not set
 # CONFIG_USB_STKWEBCAM is not set
 # CONFIG_USB_S2255 is not set
@@ -914,15 +921,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1050,6 +1059,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1071,6 +1081,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1125,6 +1140,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1174,10 +1190,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1279,6 +1308,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 125304e80f5..edbece52afc 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:44:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:02:32 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -61,6 +62,7 @@ CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -78,11 +80,14 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
@@ -134,6 +139,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -143,8 +149,6 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -513,7 +517,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -564,6 +567,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -601,8 +609,13 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -630,10 +643,21 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -647,6 +671,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 0308abf5238..bae161c6683 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:45:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:02:52 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -62,7 +63,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -70,6 +70,7 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,12 +89,15 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -150,6 +154,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -159,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -698,7 +701,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -752,6 +754,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -804,6 +811,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -847,10 +855,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -949,6 +970,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index a8c24b70348..330043f3c31 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:48:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:03:27 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -38,6 +39,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -69,6 +71,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -87,6 +90,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -94,6 +98,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -105,7 +111,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +156,7 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -160,8 +166,6 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -585,6 +589,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -812,6 +817,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -833,6 +839,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -887,6 +898,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -927,6 +939,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -961,6 +974,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -969,9 +983,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1090,6 +1109,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 4b79c2567dc..56478918440 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:51:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:04:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -38,6 +39,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -73,6 +75,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -91,6 +94,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -98,6 +102,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -109,7 +115,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +160,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -164,8 +170,6 @@ CONFIG_CPU_SUBTYPE_SH7721=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -776,15 +780,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -943,6 +949,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -964,6 +971,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1021,6 +1033,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1085,6 +1098,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1119,6 +1133,7 @@ CONFIG_FRAME_POINTER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1127,9 +1142,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1248,6 +1268,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 82bdaac45fb..726fdbdb280 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:55:10 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:05:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -69,7 +70,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -78,6 +78,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -97,6 +98,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -105,6 +107,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +121,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +170,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -176,8 +180,6 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -486,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -692,7 +695,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -766,6 +768,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -789,6 +792,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -832,6 +840,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -872,11 +881,25 @@ CONFIG_DEBUG_FS=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
@@ -977,6 +1000,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
new file mode 100644
index 00000000000..96d2587467e
--- /dev/null
+++ b/arch/sh/configs/se7724_defconfig
@@ -0,0 +1,1552 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Tue May 26 13:18:09 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7724_SOLUTION_ENGINE=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_TMU=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index ceef6d9138e..ed1a1230f63 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:57:31 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:06:02 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -70,6 +71,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,6 +90,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -106,7 +111,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +156,7 @@ CONFIG_CPU_SUBTYPE_SH7750=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -161,8 +166,6 @@ CONFIG_CPU_SUBTYPE_SH7750=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -553,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -775,6 +779,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -829,6 +838,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -886,10 +896,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -989,6 +1012,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index 67fc26b3a7d..55f3b788e0c 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 18:59:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:06:44 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -74,6 +74,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,6 +93,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,7 +114,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -742,6 +744,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -796,6 +803,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -833,10 +841,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -936,6 +957,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index ebce23cc2ad..c4f0af32efa 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:02:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:07:14 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -67,6 +68,7 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,12 +88,15 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -103,7 +108,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -149,6 +153,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -158,8 +163,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -285,8 +288,6 @@ CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -558,6 +559,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -957,15 +959,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1122,6 +1126,10 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1245,11 +1253,24 @@ CONFIG_DEBUG_FS=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1345,6 +1366,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 6fcdb090cf3..f9c6e51dc0b 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:04:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:07:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -41,6 +42,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -67,7 +69,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -76,6 +77,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -105,6 +107,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +121,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +166,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -172,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -300,8 +302,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -562,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -656,6 +657,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -679,6 +681,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -887,7 +890,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -929,6 +931,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -952,6 +955,11 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1001,6 +1009,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1112,11 +1121,26 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
@@ -1228,6 +1252,7 @@ CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 1ab37c01da6..48b58098cf8 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:09:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:09:16 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -39,6 +40,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -72,6 +74,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -90,6 +93,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -97,6 +101,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
@@ -108,7 +114,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -163,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7710=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -728,7 +732,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -780,6 +783,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -834,6 +842,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -871,11 +880,24 @@ CONFIG_DEBUG_FS=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -975,6 +997,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
new file mode 100644
index 00000000000..ec8f18c7684
--- /dev/null
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -0,0 +1,707 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:09:47 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_KEXEC_JUMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index c79bb84ec30..f77bc7998d2 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:10:57 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:10:12 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -78,6 +79,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +121,6 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -164,6 +167,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -173,8 +177,6 @@ CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -555,6 +557,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -941,6 +944,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -965,6 +969,11 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1012,6 +1021,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1100,11 +1110,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1204,6 +1228,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
new file mode 100644
index 00000000000..d6489b46ca5
--- /dev/null
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -0,0 +1,700 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc4
+# Tue May 12 14:48:21 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+CONFIG_CPU_SUBTYPE_SH7770=y
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_KEXEC_JUMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index a6cf4505741..1c55b800d12 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:12:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:10:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -79,6 +80,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -106,6 +109,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,7 +123,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +170,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -175,8 +180,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -310,8 +313,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -672,6 +673,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1009,15 +1011,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1218,6 +1222,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1240,6 +1245,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1289,6 +1299,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1377,6 +1388,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1413,6 +1427,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1422,9 +1437,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1542,6 +1562,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index e4fac2efc05..4385fe97a78 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 22 19:17:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:11:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -307,8 +307,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index d695e906187..4e120256ec6 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:19:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:12:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -63,6 +64,7 @@ CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -81,12 +83,15 @@ CONFIG_COMPAT_BRK=y
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -137,6 +142,7 @@ CONFIG_CPU_SUBTYPE_SH7706=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -146,8 +152,6 @@ CONFIG_CPU_SUBTYPE_SH7706=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -675,6 +679,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -718,6 +727,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -762,10 +772,22 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
@@ -864,6 +886,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index e3651f57439..c088144925f 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:20:54 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:13:12 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -42,6 +43,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -96,6 +98,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,6 +129,8 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -138,7 +143,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -186,6 +190,7 @@ CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -195,8 +200,6 @@ CONFIG_CPU_SUBTYPE_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -553,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -646,6 +650,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
@@ -985,6 +990,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1008,6 +1014,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1051,6 +1062,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1085,6 +1097,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1124,6 +1139,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1133,11 +1149,16 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1245,6 +1266,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index 6960f60bf52..54a7a3c41f3 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:21:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:14:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -64,7 +65,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -73,6 +73,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -92,12 +93,15 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -105,7 +109,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +154,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -160,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -295,8 +297,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -763,6 +763,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -805,8 +810,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -844,10 +854,23 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -862,6 +885,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 7ea639bc593..dbe7e546f0b 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:23:31 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:14:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -61,7 +62,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -70,6 +70,7 @@ CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -88,6 +89,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -95,6 +97,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -107,7 +111,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +156,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -162,8 +166,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -506,6 +508,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -547,8 +554,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -577,10 +589,24 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -595,6 +621,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index bbeb4c6ebb9..8ca94ef7427 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:24:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:14:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -40,6 +41,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -66,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -76,6 +77,7 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -95,6 +97,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -102,6 +105,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -114,7 +119,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -169,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -305,8 +308,6 @@ CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
 #
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
@@ -789,6 +790,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -906,6 +908,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -929,6 +932,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -1182,7 +1186,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1393,6 +1396,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1419,6 +1423,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1467,8 +1476,13 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1576,6 +1590,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1610,6 +1625,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1618,9 +1634,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1741,6 +1762,7 @@ CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 34f5192a324..bfb4d980689 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:30:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:17:05 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -69,7 +70,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -78,6 +78,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -97,6 +98,7 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -105,6 +107,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +121,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +170,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -176,8 +180,6 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 CONFIG_CPU_SUBTYPE_SH7366=y
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -584,6 +586,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -936,6 +939,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -958,6 +962,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1005,6 +1014,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1095,10 +1105,24 @@ CONFIG_FRAME_WARN=1024
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1208,6 +1232,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index d174b1a4d80..512664fed66 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:33:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 14:02:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -76,6 +77,7 @@ CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -94,6 +96,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -102,6 +105,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -114,7 +119,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +166,7 @@ CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -171,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7786=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -900,15 +903,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1046,6 +1051,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1068,6 +1074,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1117,6 +1128,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1209,10 +1221,24 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -1322,6 +1348,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 666713ac5fc..63e9dd30b41 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -16,7 +16,8 @@ config SH_DMA_IRQ_MULTI
 		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
 		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
 		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
-		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785
+		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
+		     CPU_SUBTYPE_SH7760
 
 config NR_ONCHIP_DMA_CHANNELS
 	int
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 7e816ededed..e8db585a663 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -17,21 +17,3 @@ config SH_PCIDMA_NONCOHERENT
 	  code will not have to flush the CPU's caches. If you have a PCI host
 	  bridge integrated with your SH CPU, refer carefully to the chip specs
 	  to see if you can say 'N' here. Otherwise, leave it as 'Y'.
-
-# This is also board-specific
-config PCI_AUTO
-	bool
-	depends on PCI
-	default y
-
-config PCI_AUTO_UPDATE_RESOURCES
-	bool
-	depends on PCI_AUTO
-	default y if !SH_DREAMCAST
-	help
-	  Selecting this option will cause the PCI auto code to leave your
-	  BAR values alone. Otherwise they will be updated automatically. If
-	  for some reason, you have a board that simply refuses to work
-	  with its resources updated beyond what they are when the device
-	  is powered up, set this to N. Everyone else will want this as Y.
-
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 847e90894d1..d2ffc477549 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -1,9 +1,7 @@
 #
 # Makefile for the PCI specific kernel interface routines under Linux.
 #
-
 obj-y					+= pci.o
-obj-$(CONFIG_PCI_AUTO)			+= pci-auto.o
 
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
@@ -12,15 +10,17 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o
 
-obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o
-obj-$(CONFIG_SH_SECUREEDGE5410)		+= ops-snapgear.o
-obj-$(CONFIG_SH_RTS7751R2D)		+= ops-rts7751r2d.o fixups-rts7751r2d.o
-obj-$(CONFIG_SH_SH03)			+= ops-sh03.o fixups-sh03.o
-obj-$(CONFIG_SH_HIGHLANDER)		+= ops-r7780rp.o fixups-r7780rp.o
-obj-$(CONFIG_SH_SDK7780)		+= ops-sdk7780.o fixups-sdk7780.o
-obj-$(CONFIG_SH_TITAN)			+= ops-titan.o
-obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
-obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
-obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
-obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o
+obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
+					   pci-dreamcast.o
+obj-$(CONFIG_SH_SECUREEDGE5410)		+= fixups-snapgear.o
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= fixups-se7751.o
+obj-$(CONFIG_SH_RTS7751R2D)		+= fixups-rts7751r2d.o
+obj-$(CONFIG_SH_SH03)			+= fixups-sh03.o
+obj-$(CONFIG_SH_HIGHLANDER)		+= fixups-r7780rp.o
+obj-$(CONFIG_SH_SH7785LCR)		+= fixups-r7780rp.o
+obj-$(CONFIG_SH_SDK7780)		+= fixups-sdk7780.o
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= fixups-sdk7780.o
+obj-$(CONFIG_SH_TITAN)			+= fixups-titan.o
+obj-$(CONFIG_SH_LANDISK)		+= fixups-landisk.o
+obj-$(CONFIG_SH_LBOX_RE2)		+= fixups-rts7751r2d.o
+obj-$(CONFIG_SH_CAYMAN)			+= fixups-cayman.o
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/fixups-cayman.c
index 38ef76207af..b68b61d22c6 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/fixups-cayman.c
@@ -75,15 +75,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	return result;
 }
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh5_pci_ops, NULL, NULL, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-int __init pcibios_init_platform(void)
-{
-	return sh5pci_init(__pa(memory_start),
-			   __pa(memory_end) - __pa(memory_start));
-}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index 2bf85cf091e..ed7f489936f 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -30,7 +30,7 @@
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
-	struct pci_channel *p = board_pci_channels;
+	struct pci_channel *p = dev->sysdata;
 
 	printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
 
@@ -41,6 +41,13 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev)
 		 */
 		dev->resource[1].start	= p->io_resource->start  + 0x100;
 		dev->resource[1].end	= dev->resource[1].start + 0x200 - 1;
+
+		/*
+		 * This is not a normal BAR, prevent any attempts to move
+		 * the BAR, as this will result in a bus lock.
+		 */
+		dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
+
 		/*
 		 * Redirect dma memory allocations to special memory window.
 		 */
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c
index bff09ecf341..bb1a6bb5149 100644
--- a/arch/sh/drivers/pci/ops-landisk.c
+++ b/arch/sh/drivers/pci/fixups-landisk.c
@@ -15,39 +15,6 @@
 #include <linux/pci.h>
 #include "pci-sh4.h"
 
-static struct resource sh7751_io_resource = {
-	.name = "SH7751 IO",
-	.start = SH7751_PCI_IO_BASE,
-	.end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name = "SH7751 mem",
-	.start = SH7751_PCI_MEMORY_BASE,
-	.end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
-	{&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
-	{NULL, NULL, NULL, 0, 0},
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0 = {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= (64 << 20),	/* 64MB */
-	},
-
-	.flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
-
 int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	/*
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c
deleted file mode 100644
index 1c1d41255ec..00000000000
--- a/arch/sh/drivers/pci/fixups-lboxre2.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/sh/drivers/pci/fixups-lboxre2.c
- *
- * L-BOX RE2 PCI fixups
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include "pci-sh4.h"
-
-#define PCIMCR_MRSET_OFF	0xBFFFFFFF
-#define PCIMCR_RFSH_OFF		0xFFFFFFFB
-
-int pci_fixup_pcic(void)
-{
-	unsigned long bcr1, mcr;
-
-	bcr1 = ctrl_inl(SH7751_BCR1);
-	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
-	pci_write_reg(bcr1, SH4_PCIBCR1);
-
-	/* Enable all interrupts, so we known what to fix */
-	pci_write_reg(0x0000c3ff, SH4_PCIINTM);
-	pci_write_reg(0x0000380f, SH4_PCIAINTM);
-	pci_write_reg(0xfb900047, SH7751_PCICONF1);
-	pci_write_reg(0xab000001, SH7751_PCICONF4);
-
-	mcr = ctrl_inl(SH7751_MCR);
-	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
-	pci_write_reg(mcr, SH4_PCIMCR);
-
-	pci_write_reg(0x0c000000, SH7751_PCICONF5);
-	pci_write_reg(0xd0000000, SH7751_PCICONF6);
-	pci_write_reg(0x0c000000, SH4_PCILAR0);
-	pci_write_reg(0x00000000, SH4_PCILAR1);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 3e321df65d2..15ca65cb667 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -11,35 +11,26 @@
  * for more details.
  */
 #include <linux/pci.h>
+#include <linux/io.h>
 #include "pci-sh4.h"
-#include <asm/io.h>
 
-int pci_fixup_pcic(void)
-{
-	pci_write_reg(0x000043ff, SH4_PCIINTM);
-	pci_write_reg(0x0000380f, SH4_PCIAINTM);
-
-	pci_write_reg(0xfbb00047, SH7780_PCICMD);
-	pci_write_reg(0x00000000, SH7780_PCIIBAR);
-
-	pci_write_reg(0x00011912, SH7780_PCISVID);
-	pci_write_reg(0x08000000, SH7780_PCICSCR0);
-	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
-	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
-	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
-
-	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
-	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
 
-#ifdef CONFIG_32BIT
-	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
-	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
 
-	/* Set IOBR for windows containing area specified in pci.h */
-	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
-		      SH7780_PCIIOBR);
-	pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR);
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+	pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
+	pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
+	pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
 
 	return 0;
 }
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 904bce8768d..052b354236d 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -1,43 +1,67 @@
 /*
  * arch/sh/drivers/pci/fixups-rts7751r2d.c
  *
- * RTS7751R2D PCI fixups
+ * RTS7751R2D / LBOXRE2 PCI fixups
  *
  * Copyright (C) 2003  Lineo uSolutions, Inc.
  * Copyright (C) 2004  Paul Mundt
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#include <linux/pci.h>
+#include <mach/lboxre2.h>
+#include <mach/r2d.h>
 #include "pci-sh4.h"
+#include <asm/machtypes.h>
 
 #define PCIMCR_MRSET_OFF	0xBFFFFFFF
 #define PCIMCR_RFSH_OFF		0xFFFFFFFB
 
-int pci_fixup_pcic(void)
+static u8 rts7751r2d_irq_tab[] __initdata = {
+	IRQ_PCI_INTA,
+	IRQ_PCI_INTB,
+	IRQ_PCI_INTC,
+	IRQ_PCI_INTD,
+};
+
+static char lboxre2_irq_tab[] __initdata = {
+	IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	if (mach_is_lboxre2())
+		return lboxre2_irq_tab[slot];
+	else
+		return rts7751r2d_irq_tab[slot];
+}
+
+int pci_fixup_pcic(struct pci_channel *chan)
 {
 	unsigned long bcr1, mcr;
 
 	bcr1 = ctrl_inl(SH7751_BCR1);
 	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
-	pci_write_reg(bcr1, SH4_PCIBCR1);
+	pci_write_reg(chan, bcr1, SH4_PCIBCR1);
 
 	/* Enable all interrupts, so we known what to fix */
-	pci_write_reg(0x0000c3ff, SH4_PCIINTM);
-	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+	pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
+	pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
 
-	pci_write_reg(0xfb900047, SH7751_PCICONF1);
-	pci_write_reg(0xab000001, SH7751_PCICONF4);
+	pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
+	pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
 
 	mcr = ctrl_inl(SH7751_MCR);
 	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
-	pci_write_reg(mcr, SH4_PCIMCR);
+	pci_write_reg(chan, mcr, SH4_PCIMCR);
 
-	pci_write_reg(0x0c000000, SH7751_PCICONF5);
-	pci_write_reg(0xd0000000, SH7751_PCICONF6);
-	pci_write_reg(0x0c000000, SH4_PCILAR0);
-	pci_write_reg(0x00000000, SH4_PCILAR1);
+	pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
+	pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
+	pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
+	pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
 
 	return 0;
 }
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 2f8863099dd..250b0edd736 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -5,55 +5,48 @@
  *
  * Copyright (C) 2003  Lineo uSolutions, Inc.
  * Copyright (C) 2004 - 2006  Paul Mundt
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/pci.h>
+#include <linux/io.h>
 #include "pci-sh4.h"
-#include <asm/io.h>
 
-int pci_fixup_pcic(void)
+/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
+static char sdk7780_irq_tab[4][16] __initdata = {
+	/* INTA */
+	{ 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+	/* INTB */
+	{ 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+	/* INTC */
+	{ 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+	/* INTD */
+	{ 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+       return sdk7780_irq_tab[pin-1][slot];
+}
+int pci_fixup_pcic(struct pci_channel *chan)
 {
-	ctrl_outl(0x00000001, SH7780_PCI_VCR2);
-
 	/* Enable all interrupts, so we know what to fix */
-	pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
-	pci_write_reg(0x0000380F, SH7780_PCIAINTM);
+	pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
 
 	/* Set up standard PCI config registers */
-	pci_write_reg(0xFB00, SH7780_PCISTATUS);
-	pci_write_reg(0x0047, SH7780_PCICMD);
-	pci_write_reg(0x00, SH7780_PCIPIF);
-	pci_write_reg(0x00, SH7780_PCISUB);
-	pci_write_reg(0x06, SH7780_PCIBCC);
-	pci_write_reg(0x1912, SH7780_PCISVID);
-	pci_write_reg(0x0001, SH7780_PCISID);
-
-	pci_write_reg(0x08000000, SH7780_PCIMBAR0);	/* PCI */
-	pci_write_reg(0x08000000, SH7780_PCILAR0);	/* SHwy */
-	pci_write_reg(0x07F00001, SH7780_PCILSR);	/* size 128M w/ MBAR */
-
-	pci_write_reg(0x00000000, SH7780_PCIMBAR1);
-	pci_write_reg(0x00000000, SH7780_PCILAR1);
-	pci_write_reg(0x00000000, SH7780_PCILSR1);
-
-	pci_write_reg(0xAB000801, SH7780_PCIIBAR);
-
-	/*
-	 * Set the MBR so PCI address is one-to-one with window,
-	 * meaning all calls go straight through... use ifdef to
-	 * catch erroneous assumption.
-	 */
-	pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
-	pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0);	/* 16M */
+	pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0);	/* PCI */
+	pci_write_reg(chan, 0x08000000, SH4_PCILAR0);	/* SHwy */
+	pci_write_reg(chan, 0x07F00001, SH4_PCILSR0);	/* size 128M w/ MBAR */
 
-	/* Set IOBR for window containing area specified in pci.h */
-	pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
-	pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
+	pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
+	pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
+	pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
 
-	pci_write_reg(0xA5000C01, SH7780_PCICR);
+	pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
+	pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
 
 	return 0;
 }
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
new file mode 100644
index 00000000000..475fa9f0fe2
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -0,0 +1,111 @@
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+        switch (slot) {
+        case 0: return 13;
+        case 1: return 13;	/* AMD Ethernet controller */
+        case 2: return -1;
+        case 3: return -1;
+        case 4: return -1;
+        default:
+                printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+                return -1;
+        }
+}
+
+#define PCIMCR_MRSET_OFF	0xBFFFFFFF
+#define PCIMCR_RFSH_OFF		0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description:  This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+	unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+	unsigned short bcr2;
+
+	/*
+	* Initialize the slave bus controller on the pcic.  The values used
+	* here should not be hardcoded, but they should be taken from the bsc
+	* on the processor, to make this function as generic as possible.
+	* (i.e. Another sbc may usr different SDRAM timing settings -- in order
+	* for the pcic to work, its settings need to be exactly the same.)
+	*/
+	bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
+	bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
+	wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
+	wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
+	wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
+	mcr = (*(volatile unsigned long*)(SH7751_MCR));
+
+	bcr1 = bcr1 | 0x00080000;  /* Enable Bit 19, BREQEN */
+	(*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
+
+	bcr1 = bcr1 | 0x40080000;  /* Enable Bit 19 BREQEN, set PCIC to slave */
+	PCIC_WRITE(SH7751_PCIBCR1, bcr1);	 /* PCIC BCR1 */
+	PCIC_WRITE(SH7751_PCIBCR2, bcr2);     /* PCIC BCR2 */
+	PCIC_WRITE(SH7751_PCIWCR1, wcr1);     /* PCIC WCR1 */
+	PCIC_WRITE(SH7751_PCIWCR2, wcr2);     /* PCIC WCR2 */
+	PCIC_WRITE(SH7751_PCIWCR3, wcr3);     /* PCIC WCR3 */
+	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+	PCIC_WRITE(SH7751_PCIMCR, mcr);      /* PCIC MCR */
+
+
+	/* Enable all interrupts, so we know what to fix */
+	PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+	PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+	/* Set up standard PCI config registers */
+	PCIC_WRITE(SH7751_PCICONF1,	0xF39000C7); /* Bus Master, Mem & I/O access */
+	PCIC_WRITE(SH7751_PCICONF2,	0x00000000); /* PCI Class code & Revision ID */
+	PCIC_WRITE(SH7751_PCICONF4,	0xab000001); /* PCI I/O address (local regs) */
+	PCIC_WRITE(SH7751_PCICONF5,	0x0c000000); /* PCI MEM address (local RAM)  */
+	PCIC_WRITE(SH7751_PCICONF6,	0xd0000000); /* PCI MEM address (unused)     */
+	PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+	PCIC_WRITE(SH7751_PCILSR0, 0x03f00000);   /* MEM (full 64M exposed)       */
+	PCIC_WRITE(SH7751_PCILSR1, 0x00000000);   /* MEM (unused)                 */
+	PCIC_WRITE(SH7751_PCILAR0, 0x0c000000);   /* MEM (direct map from PCI)    */
+	PCIC_WRITE(SH7751_PCILAR1, 0x00000000);   /* MEM (unused)                 */
+
+	/* Now turn it on... */
+	PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+	/*
+	* Set PCIMBR and PCIIOBR here, assuming a single window
+	* (16M MEM, 256K IO) is enough.  If a larger space is
+	* needed, the readx/writex and inx/outx functions will
+	* have to do more (e.g. setting registers for each call).
+	*/
+
+	/*
+	* Set the MBR so PCI address is one-to-one with window,
+	* meaning all calls go straight through... use BUG_ON to
+	* catch erroneous assumption.
+	*/
+	BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+
+	PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+
+	/* Set IOBR for window containing area specified in pci.h */
+	PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+
+	/* All done, may as well say so... */
+	printk("SH7751 PCI: Finished initialization of the PCI controller\n");
+
+	return 1;
+}
diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c
deleted file mode 100644
index 880cea1c0d8..00000000000
--- a/arch/sh/drivers/pci/fixups-se7780.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/sh/drivers/pci/fixups-se7780.c
- *
- * HITACHI UL Solution Engine 7780  PCI fixups
- *
- * Copyright (C) 2003  Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006  Paul Mundt
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/pci.h>
-#include "pci-sh4.h"
-#include <asm/io.h>
-
-int pci_fixup_pcic(void)
-{
-	ctrl_outl(0x00000001, SH7780_PCI_VCR2);
-
-	/* Enable all interrupts, so we know what to fix */
-	pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
-	pci_write_reg(0x0000380F, SH7780_PCIAINTM);
-
-	/* Set up standard PCI config registers */
-	ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS));
-	ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD));
-	ctrl_outb(  0x00, PCI_REG(SH7780_PCIPIF));
-	ctrl_outb(  0x00, PCI_REG(SH7780_PCISUB));
-	ctrl_outb(  0x06, PCI_REG(SH7780_PCIBCC));
-	ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID));
-	ctrl_outw(0x0001, PCI_REG(SH7780_PCISID));
-
-	pci_write_reg(0x08000000, SH7780_PCIMBAR0);     /* PCI */
-	pci_write_reg(0x08000000, SH7780_PCILAR0);     /* SHwy */
-	pci_write_reg(0x07F00001, SH7780_PCILSR);      /* size 128M w/ MBAR */
-
-	pci_write_reg(0x00000000, SH7780_PCIMBAR1);
-	pci_write_reg(0x00000000, SH7780_PCILAR1);
-	pci_write_reg(0x00000000, SH7780_PCILSR1);
-
-	pci_write_reg(0xAB000801, SH7780_PCIIBAR);
-
-	/*
-	 * Set the MBR so PCI address is one-to-one with window,
-	 * meaning all calls go straight through... use ifdef to
-	 * catch erroneous assumption.
-	 */
-	pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
-	pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0);    /* 16M */
-
-	/* Set IOBR for window containing area specified in pci.h */
-	pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
-	pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
-
-	pci_write_reg(0xA5000C01, SH7780_PCICR);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
deleted file mode 100644
index 4949e601387..00000000000
--- a/arch/sh/drivers/pci/fixups-sh7785lcr.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/sh/drivers/pci/fixups-sh7785lcr.c
- *
- * R0P7785LC0011RL PCI fixups
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * Based on arch/sh/drivers/pci/fixups-r7780rp.c
- * Copyright (C) 2003  Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-int pci_fixup_pcic(void)
-{
-	pci_write_reg(0x000043ff, SH4_PCIINTM);
-	pci_write_reg(0x0000380f, SH4_PCIAINTM);
-
-	pci_write_reg(0xfbb00047, SH7780_PCICMD);
-	pci_write_reg(0x00000000, SH7780_PCIIBAR);
-
-	pci_write_reg(0x00011912, SH7780_PCISVID);
-	pci_write_reg(0x08000000, SH7780_PCICSCR0);
-	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
-	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
-	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
-
-	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
-	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
-
-#ifdef CONFIG_32BIT
-	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
-	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
-
-	/* Set IOBR for windows containing area specified in pci.h */
-	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
-		      SH7780_PCIIOBR);
-	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c
new file mode 100644
index 00000000000..5a39ecc1adb
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-snapgear.c
@@ -0,0 +1,38 @@
+/*
+ * arch/sh/drivers/pci/ops-snapgear.c
+ *
+ * Author:  David McCullough <davidm@snapgear.com>
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the SnapGear boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	int irq = -1;
+
+	switch (slot) {
+	case 8:  /* the PCI bridge */ break;
+	case 11: irq = 8;  break; /* USB    */
+	case 12: irq = 11; break; /* PCMCIA */
+	case 13: irq = 5;  break; /* eth0   */
+	case 14: irq = 8;  break; /* eth1   */
+	case 15: irq = 11; break; /* safenet (unused) */
+	}
+
+	printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
+	       slot, pin - 1 + 'A', irq);
+
+	return irq;
+}
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/fixups-titan.c
index a8f7801a34a..3a79fa8254a 100644
--- a/arch/sh/drivers/pci/ops-titan.c
+++ b/arch/sh/drivers/pci/fixups-titan.c
@@ -36,42 +36,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 
 	return irq;
 }
-
-static struct resource sh7751_io_resource = {
-	.name	= "SH7751_IO",
-	.start	= SH7751_PCI_IO_BASE,
-	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name	= "SH7751_mem",
-	.start	= SH7751_PCI_MEMORY_BASE,
-	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0	= {
-		.base	= SH7751_CS2_BASE_ADDR,
-		.size	= SH7751_MEM_REGION_SIZE*2,	/* cs2 and cs3 */
-	},
-
-	.window1	= {
-		.base	= SH7751_CS2_BASE_ADDR,
-		.size	= SH7751_MEM_REGION_SIZE*2,
-	},
-
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index f5d2a2aa6f3..e83d0d3aabe 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -1,15 +1,9 @@
 /*
- * arch/sh/drivers/pci/ops-dreamcast.c
- *
  * PCI operations for the Sega Dreamcast
  *
  * Copyright (C) 2001, 2002  M. R. Brown
  * Copyright (C) 2002, 2003  Paul Mundt
  *
- * This file originally bore the message (with enclosed-$):
- *	Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- *	Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -23,34 +17,10 @@
 #include <linux/irq.h>
 #include <linux/pci.h>
 #include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 #include <mach/pci.h>
 
-static struct resource gapspci_io_resource = {
-	.name	= "GAPSPCI IO",
-	.start	= GAPSPCI_BBA_CONFIG,
-	.end	= GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource gapspci_mem_resource = {
-	.name	= "GAPSPCI mem",
-	.start	= GAPSPCI_DMA_BASE,
-	.end	= GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct pci_ops gapspci_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &gapspci_pci_ops, &gapspci_io_resource,
-	  &gapspci_mem_resource, 0, 1 },
-	{ 0, }
-};
-EXPORT_SYMBOL(board_pci_channels);
-
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
  * someone implicitly messes around with the last devfn value.. otherwise we
@@ -85,10 +55,10 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
-		case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
-		case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
-		case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
-	}	
+	case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+	case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+	case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+	}
 
         return PCIBIOS_SUCCESSFUL;
 }
@@ -99,72 +69,15 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
-		case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
-		case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
-		case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+	case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+	case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+	case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
 	}
 
         return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops gapspci_pci_ops = {
+struct pci_ops gapspci_pci_ops = {
 	.read	= gapspci_read,
 	.write	= gapspci_write,
 };
-
-/*
- * gapspci init
- */
-
-int __init gapspci_init(void)
-{
-	char idbuf[16];
-	int i;
-
-	/*
-	 * FIXME: All of this wants documenting to some degree,
-	 * even some basic register definitions would be nice.
-	 *
-	 * I haven't seen anything this ugly since.. maple.
-	 */
-
-	for (i=0; i<16; i++)
-		idbuf[i] = inb(GAPSPCI_REGS+i);
-
-	if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
-		return -ENODEV;
-
-	outl(0x5a14a501, GAPSPCI_REGS+0x18);
-
-	for (i=0; i<1000000; i++)
-		;
-
-	if (inl(GAPSPCI_REGS+0x18) != 1)
-		return -EINVAL;
-
-	outl(0x01000000, GAPSPCI_REGS+0x20);
-	outl(0x01000000, GAPSPCI_REGS+0x24);
-
-	outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
-	outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
-
-	outl(1, GAPSPCI_REGS+0x14);
-	outl(1, GAPSPCI_REGS+0x34);
-
-	/* Setting Broadband Adapter */
-	outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
-	outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
-	outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
-	outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
-	outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
-	outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
-	outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
-
-	return 0;
-}
-
-/* Haven't done anything here as yet */
-char * __devinit pcibios_setup(char *str)
-{
-	return str;
-}
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
deleted file mode 100644
index 86c0b6fb737..00000000000
--- a/arch/sh/drivers/pci/ops-lboxre2.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-lboxre2.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * PCI initialization for the NTT COMWARE L-BOX RE2
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/lboxre2.h>
-#include "pci-sh4.h"
-
-static char lboxre2_irq_tab[] __initdata = {
-	IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	return lboxre2_irq_tab[slot];
-}
-
-static struct resource sh7751_io_resource = {
-	.name	= "SH7751_IO",
-	.start	= SH7751_PCI_IO_BASE ,
-	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name	= "SH7751_mem",
-	.start	= SH7751_PCI_MEMORY_BASE,
-	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0	= {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-	.window1	= {
-		.base	= 0x00000000,	/* Unused */
-		.size	= 0x00000000,	/* Unused */
-	},
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
deleted file mode 100644
index 8555238e63e..00000000000
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Author:  Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach/highlander.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-static char irq_tab[] __initdata = {
-	65, 66, 67, 68,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	return irq_tab[slot];
-}
-
-static struct resource sh7780_io_resource = {
-	.name	= "SH7780_IO",
-	.start	= SH7780_PCI_IO_BASE,
-	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7780_mem_resource = {
-	.name	= "SH7780_mem",
-	.start	= SH7780_PCI_MEMORY_BASE,
-	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7780_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7780_pci_map = {
-	.window0	= {
-		.base	= SH7780_CS2_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-
-	.window1	= {
-		.base	= SH7780_CS3_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	return sh7780_pcic_init(&sh7780_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
deleted file mode 100644
index d6ca74b25d5..00000000000
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-rts7751r2d.c
- *
- * Author:  Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7751R RTS7751R2D board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/r2d.h>
-#include "pci-sh4.h"
-
-static u8 rts7751r2d_irq_tab[] __initdata = {
-	IRQ_PCI_INTA,
-	IRQ_PCI_INTB,
-	IRQ_PCI_INTC,
-	IRQ_PCI_INTD,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	return rts7751r2d_irq_tab[slot];
-}
-
-static struct resource sh7751_io_resource = {
-	.name	= "SH7751_IO",
-	.start	= 0x4000,
-	.end	= SH7751_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name	= "SH7751_mem",
-	.start	= SH7751_PCI_MEMORY_BASE,
-	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0	= {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-
-	.window1	= {
-		.base	= 0x00000000,	/* Unused */
-		.size	= 0x00000000,	/* Unused */
-	},
-
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	__set_io_port_base(SH7751_PCI_IO_BASE);
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
-
diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c
deleted file mode 100644
index 4dcc64184b2..00000000000
--- a/arch/sh/drivers/pci/ops-sdk7780.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-sdk7780.c
- *
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * PCI initialization for the SDK7780SE03
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach/sdk7780.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char sdk7780_irq_tab[4][16] __initdata = {
-	/* INTA */
-	{ 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-	/* INTB */
-	{ 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-	/* INTC */
-	{ 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-	/* INTD */
-	{ 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-       return sdk7780_irq_tab[pin-1][slot];
-}
-
-static struct resource sdk7780_io_resource = {
-	.name	= "SH7780_IO",
-	.start	= SH7780_PCI_IO_BASE,
-	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sdk7780_mem_resource = {
-	.name	= "SH7780_mem",
-	.start	= SH7780_PCI_MEMORY_BASE,
-	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sdk7780_pci_map = {
-	.window0	= {
-		.base	= SH7780_CS2_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-	.window1	= {
-		.base	= SH7780_CS3_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n");
-	return sh7780_pcic_init(&sdk7780_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
deleted file mode 100644
index 3145c62484d..00000000000
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-se7780.c
- *
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * PCI initialization for the Hitachi UL Solution Engine 7780SE03
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach-se/mach/se7780.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-/*
- * IDSEL = AD16  PCI slot
- * IDSEL = AD17  PCI slot
- * IDSEL = AD18  Serial ATA Controller (Silicon Image SiL3512A)
- * IDSEL = AD19  USB Host Controller (NEC uPD7210100A)
- */
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char se7780_irq_tab[4][16] __initdata = {
-	/* INTA */
-	{ 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-	/* INTB */
-	{ 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-	/* INTC */
-	{ 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-	/* INTD */
-	{ 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-       return se7780_irq_tab[pin-1][slot];
-}
-
-static struct resource se7780_io_resource = {
-	.name	= "SH7780_IO",
-	.start	= SH7780_PCI_IO_BASE,
-	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource se7780_mem_resource = {
-	.name	= "SH7780_mem",
-	.start	= SH7780_PCI_MEMORY_BASE,
-	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops se7780_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map se7780_pci_map = {
-	.window0	= {
-		.base	= SH7780_CS2_BASE_ADDR,
-		.size	= 0x04000000,
-	},
-	.flags  = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	printk("SH7780 PCI: Finished initialization of the PCI controller\n");
-
-	/*
-	 * FPGA PCISEL register initialize
-	 *
-	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
-	 *  -------------------------------------
-	 *  INTA || INTA  | INTD  |  --   | INTB
-	 *  -------------------------------------
-	 *  INTB || INTB  | INTA  |  --   | INTC
-	 *  -------------------------------------
-	 *  INTC || INTC  | INTB  | INTA  |  --
-	 *  -------------------------------------
-	 *  INTD || INTD  | INTC  |  --   | INTA
-	 *  -------------------------------------
-	 */
-	ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
-	ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
-
-	return sh7780_pcic_init(&se7780_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c
deleted file mode 100644
index e1703ff5a4d..00000000000
--- a/arch/sh/drivers/pci/ops-sh03.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-sh03.c
- *
- * PCI initialization for the Interface CTP/PCI-SH03 board
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include "pci-sh7751.h"
-
-/*
- * Description:  This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
-	__set_io_port_base(SH7751_PCI_IO_BASE);
-	return 1;
-}
-
-static struct resource sh7751_io_resource = {
-	.name   = "SH03 IO",
-	.start  = SH7751_PCI_IO_BASE,
-	.end    = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags  = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name   = "SH03 mem",
-	.start  = SH7751_PCI_MEMORY_BASE,
-	.end    = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags  = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh4_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 710a3b0306e..78bebebdc99 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -1,22 +1,22 @@
 /*
  * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
  *
- * Copyright (C) 2002 - 2006  Paul Mundt
+ * Copyright (C) 2002 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License v2. See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/pci.h>
+#include <linux/io.h>
 #include <asm/addrspace.h>
-#include <asm/io.h>
 #include "pci-sh4.h"
 
 /*
  * Direct access to PCI hardware...
  */
 #define CONFIG_CMD(bus, devfn, where) \
-	P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3))
+	(P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
 
 static DEFINE_SPINLOCK(sh4_pci_lock);
 
@@ -26,6 +26,7 @@ static DEFINE_SPINLOCK(sh4_pci_lock);
 static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
 			   int where, int size, u32 *val)
 {
+	struct pci_channel *chan = bus->sysdata;
 	unsigned long flags;
 	u32 data;
 
@@ -34,8 +35,8 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
 	 * so we must do byte alignment by hand
 	 */
 	spin_lock_irqsave(&sh4_pci_lock, flags);
-	pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
-	data = pci_read_reg(SH4_PCIPDR);
+	pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+	data = pci_read_reg(chan, SH4_PCIPDR);
 	spin_unlock_irqrestore(&sh4_pci_lock, flags);
 
 	switch (size) {
@@ -63,13 +64,14 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
 static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
 			 int where, int size, u32 val)
 {
+	struct pci_channel *chan = bus->sysdata;
 	unsigned long flags;
 	int shift;
 	u32 data;
 
 	spin_lock_irqsave(&sh4_pci_lock, flags);
-	pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
-	data = pci_read_reg(SH4_PCIPDR);
+	pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+	data = pci_read_reg(chan, SH4_PCIPDR);
 	spin_unlock_irqrestore(&sh4_pci_lock, flags);
 
 	switch (size) {
@@ -90,7 +92,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 	}
 
-	pci_write_reg(data, SH4_PCIPDR);
+	pci_write_reg(chan, data, SH4_PCIPDR);
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -104,66 +106,31 @@ struct pci_ops sh4_pci_ops = {
  * Not really related to pci_ops, but it's common and not worth shoving
  * somewhere else for now..
  */
-static unsigned int pci_probe = PCI_PROBE_CONF1;
-
-int __init sh4_pci_check_direct(void)
+int __init sh4_pci_check_direct(struct pci_channel *chan)
 {
 	/*
 	 * Check if configuration works.
 	 */
-	if (pci_probe & PCI_PROBE_CONF1) {
-		unsigned int tmp = pci_read_reg(SH4_PCIPAR);
-
-		pci_write_reg(P1SEG, SH4_PCIPAR);
+	unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
 
-		if (pci_read_reg(SH4_PCIPAR) == P1SEG) {
-			pci_write_reg(tmp, SH4_PCIPAR);
-			printk(KERN_INFO "PCI: Using configuration type 1\n");
-			request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
+	pci_write_reg(chan, P1SEG, SH4_PCIPAR);
 
-			return 0;
-		}
-
-		pci_write_reg(tmp, SH4_PCIPAR);
+	if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
+		pci_write_reg(chan, tmp, SH4_PCIPAR);
+		printk(KERN_INFO "PCI: Using configuration type 1\n");
+		request_region(chan->reg_base + SH4_PCIPAR, 8,
+			       "PCI conf1");
+		return 0;
 	}
 
-	pr_debug("PCI: pci_check_direct failed\n");
-	return -EINVAL;
-}
+	pci_write_reg(chan, tmp, SH4_PCIPAR);
 
-/* Handle generic fixups */
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
-	int i;
+	printk(KERN_ERR "PCI: %s failed\n", __func__);
 
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
-	for(i = 0; i < 4; i++) {
-		struct resource *r = &d->resource[i];
-
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
-	if (!strcmp(str, "off")) {
-		pci_probe = 0;
-		return NULL;
-	}
-
-	return str;
+	return -EINVAL;
 }
 
-int __attribute__((weak)) pci_fixup_pcic(void)
+int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
 {
 	/* Nothing to do. */
 	return 0;
diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c
index 729e38a6fe0..4ce95a001b8 100644
--- a/arch/sh/drivers/pci/ops-sh5.c
+++ b/arch/sh/drivers/pci/ops-sh5.c
@@ -22,31 +22,6 @@
 #include <asm/io.h>
 #include "pci-sh5.h"
 
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
-	int i;
-
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	printk("PCI: IDE base address fixup for %s\n", pci_name(d));
-	for(i=0; i<4; i++) {
-		struct resource *r = &d->resource[i];
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
-	return str;
-}
-
 static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 			int size, u32 *val)
 {
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
deleted file mode 100644
index fb0869f0bef..00000000000
--- a/arch/sh/drivers/pci/ops-sh7785lcr.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Author:  Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas R0P7785LC0011RL board
- * Based on arch/sh/drivers/pci/ops-r7780rp.c
- *
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-static char irq_tab[] __initdata = {
-	65, 66, 67, 68,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	return irq_tab[slot];
-}
-
-static struct resource sh7785_io_resource = {
-	.name	= "SH7785_IO",
-	.start	= SH7780_PCI_IO_BASE,
-	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
-	.name	= "SH7785_mem",
-	.start	= SH7780_PCI_MEMORY_BASE,
-	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7785_pci_map = {
-	.window0	= {
-#if defined(CONFIG_32BIT)
-		.base	= SH7780_32BIT_DDR_BASE_ADDR,
-		.size	= 0x40000000,
-#else
-		.base	= SH7780_CS0_BASE_ADDR,
-		.size	= 0x20000000,
-#endif
-	},
-
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
-	return sh7780_pcic_init(&sh7785_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c
deleted file mode 100644
index 53dd893d4e5..00000000000
--- a/arch/sh/drivers/pci/ops-snapgear.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/sh/drivers/pci/ops-snapgear.c
- *
- * Author:  David McCullough <davidm@snapgear.com>
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the SnapGear boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-#define SNAPGEAR_PCI_IO		0x4000
-#define SNAPGEAR_PCI_MEM	0xfd000000
-
-/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
-#define SNAPGEAR_LSR0_SIZE    (64*(1<<20)) //64MB
-#define SNAPGEAR_LSR1_SIZE    (64*(1<<20)) //64MB
-
-static struct resource sh7751_io_resource = {
-	.name		= "SH7751 IO",
-	.start		= SNAPGEAR_PCI_IO,
-	.end		= SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */
-	.flags		= IORESOURCE_IO,
-};
-
-static struct resource sh7751_mem_resource = {
-	.name		= "SH7751 mem",
-	.start		= SNAPGEAR_PCI_MEM,
-	.end		= SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */
-	.flags		= IORESOURCE_MEM,
-};
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ 0, }
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0	= {
-		.base	= SH7751_CS2_BASE_ADDR,
-		.size	= SNAPGEAR_LSR0_SIZE,
-	},
-
-	.window1	= {
-		.base	= SH7751_CS2_BASE_ADDR,
-		.size	= SNAPGEAR_LSR1_SIZE,
-	},
-
-	.flags	= SH4_PCIC_NO_RESET,
-};
-
-/*
- * Initialize the SnapGear PCI interface
- * Setup hardware to be Central Funtion
- * Copy the BSR regs to the PCI interface
- * Setup PCI windows into local RAM
- */
-int __init pcibios_init_platform(void)
-{
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	int irq = -1;
-
-	switch (slot) {
-	case 8:  /* the PCI bridge */ break;
-	case 11: irq = 8;  break; /* USB    */
-	case 12: irq = 11; break; /* PCMCIA */
-	case 13: irq = 5;  break; /* eth0   */
-	case 14: irq = 8;  break; /* eth1   */
-	case 15: irq = 11; break; /* safenet (unused) */
-	}
-
-	printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
-	       slot, pin - 1 + 'A', irq);
-
-	return irq;
-}
-
-void __init pcibios_fixup(void)
-{
-	/* Nothing to fixup .. */
-}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
deleted file mode 100644
index cf48b12ee58..00000000000
--- a/arch/sh/drivers/pci/pci-auto.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Copyright 2000, 2001 MontaVista Software Inc.
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- * Copyright 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * Modified for MIPS by Jun Sun, jsun@mvista.com
- *
- * . Simplify the interface between pci_auto and the rest: a single function.
- * . Assign resources from low address to upper address.
- * . change most int to u32.
- *
- * Further modified to include it as mips generic code, ppopov@mvista.com.
- *
- * 2001-10-26  Bradley D. LaRonde <brad@ltc.com>
- * - Add a top_bus argument to the "early config" functions so that
- *   they can set a fake parent bus pointer to convince the underlying
- *   pci ops to use type 1 configuration for sub busses.
- * - Set bridge base and limit registers correctly.
- * - Align io and memory base properly before and after bridge setup.
- * - Don't fall through to pci_setup_bars for bridge.
- * - Reformat the debug output to look more like lspci's output.
- *
- * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
- *
- * 2003-08-05  Paul Mundt <lethal@linux-sh.org>
- * - Don't update the BAR values on systems that already have valid addresses
- *   and don't want these updated for whatever reason, by way of a new config
- *   option check. However, we still read in the old BAR values so that they
- *   can still be reported through the debug output.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#define	DEBUG
-#ifdef	DEBUG
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)
-#endif
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
-	int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.bus = &bus;
-	dev.sysdata = hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-
-	if(busnr != top_bus)
-		/* Fake a parent bus structure. */
-		bus.parent = &bus;
-	else
-		bus.parent = NULL;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-static int early_##rw##_config_##size(struct pci_channel *hose,		\
-	int top_bus, int bus, int devfn, int offset, type value)	\
-{									\
-	return pci_##rw##_config_##size(				\
-		fake_pci_dev(hose, top_bus, bus, devfn),		\
-		offset, value);						\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-static struct resource *io_resource_inuse;
-static struct resource *mem_resource_inuse;
-
-static u32 pciauto_lower_iospc;
-static u32 pciauto_upper_iospc;
-
-static u32 pciauto_lower_memspc;
-static u32 pciauto_upper_memspc;
-
-static void __init
-pciauto_setup_bars(struct pci_channel *hose,
-		   int top_bus,
-		   int current_bus,
-		   int pci_devfn,
-		   int bar_limit)
-{
-	u32 bar_response, bar_size, bar_value;
-	u32 bar, addr_mask, bar_nr = 0;
-	u32 * upper_limit;
-	u32 * lower_limit;
-	int found_mem64 = 0;
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-		u32 bar_addr;
-
-		/* Read the old BAR value */
-		early_read_config_dword(hose, top_bus,
-					current_bus,
-					pci_devfn,
-					bar,
-					&bar_addr);
-
-		/* Tickle the BAR and get the response */
-		early_write_config_dword(hose, top_bus,
-					 current_bus,
-					 pci_devfn,
-					 bar,
-					 0xffffffff);
-
-		early_read_config_dword(hose, top_bus,
-					current_bus,
-					pci_devfn,
-					bar,
-					&bar_response);
-
-		/*
-		 * Write the old BAR value back out, only update the BAR
-		 * if we implicitly want resources to be updated, which
-		 * is done by the generic code further down. -- PFM.
-		 */
-		early_write_config_dword(hose, top_bus,
-					 current_bus,
-					 pci_devfn,
-					 bar,
-					 bar_addr);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		/*
-		 * Workaround for a BAR that doesn't use its upper word,
-		 * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
-		 * bdl <brad@ltc.com>
-		 */
-		if (!(bar_response & 0xffff0000))
-			bar_response |= 0xffff0000;
-
-retry:
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
-			upper_limit = &pciauto_upper_iospc;
-			lower_limit = &pciauto_lower_iospc;
-			DBG("        I/O");
-		} else {
-			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			    PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
-
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
-			upper_limit = &pciauto_upper_memspc;
-			lower_limit = &pciauto_lower_memspc;
-			DBG("        Mem");
-		}
-
-
-		/* Calculate requested size */
-		bar_size = ~(bar_response & addr_mask) + 1;
-
-		/* Allocate a base address */
-		bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
-
-		if ((bar_value + bar_size) > *upper_limit) {
-			if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-				if (io_resource_inuse->child) {
-					io_resource_inuse =
-						io_resource_inuse->child;
-					pciauto_lower_iospc =
-						io_resource_inuse->start;
-					pciauto_upper_iospc =
-						io_resource_inuse->end + 1;
-					goto retry;
-				}
-
-			} else {
-				if (mem_resource_inuse->child) {
-					mem_resource_inuse =
-						mem_resource_inuse->child;
-					pciauto_lower_memspc =
-						mem_resource_inuse->start;
-					pciauto_upper_memspc =
-						mem_resource_inuse->end + 1;
-					goto retry;
-				}
-			}
-			DBG(" unavailable -- skipping, value %x size %x\n",
-					bar_value, bar_size);
-			continue;
-		}
-
-		if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
-			DBG(" unavailable -- skipping, value %x size %x\n",
-					bar_value, bar_size);
-			continue;
-		}
-
-#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
-		/* Write it out and update our limit */
-		early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-					 bar, bar_value);
-#endif
-
-		*lower_limit = bar_value + bar_size;
-
-		/*
-		 * If we are a 64-bit decoder then increment to the
-		 * upper 32 bits of the bar and force it to locate
-		 * in the lower 4GB of memory.
-		 */
-		if (found_mem64) {
-			bar += 4;
-			early_write_config_dword(hose, top_bus,
-						 current_bus,
-						 pci_devfn,
-						 bar,
-						 0x00000000);
-		}
-
-		DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
-
-		bar_nr++;
-	}
-
-}
-
-static void __init
-pciauto_prescan_setup_bridge(struct pci_channel *hose,
-			     int top_bus,
-			     int current_bus,
-			     int pci_devfn,
-			     int sub_bus)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-	                        PCI_PRIMARY_BUS, current_bus);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SECONDARY_BUS, sub_bus + 1);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, 0xff);
-
-	/* Align memory and I/O to 1MB and 4KB boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
-		& ~(0x100000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-
-	/* Set base (lower limit) of address range behind bridge. */
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
-
-	/* We don't support prefetchable memory for now, so disable */
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-				PCI_PREF_MEMORY_BASE, 0);
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-				PCI_PREF_MEMORY_LIMIT, 0);
-}
-
-static void __init
-pciauto_postscan_setup_bridge(struct pci_channel *hose,
-			      int top_bus,
-			      int current_bus,
-			      int pci_devfn,
-			      int sub_bus)
-{
-	u32 temp;
-
-	/*
-	 * [jsun] we always bump up baselines a little, so that if there
-	 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
-	 * spaces.
-	 */
-	pciauto_lower_memspc += 1;
-	pciauto_lower_iospc += 1;
-
-	/* Configure bus number registers */
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, sub_bus);
-
-	/* Set upper limit of address range behind bridge. */
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
-
-	/* Align memory and I/O to 1MB and 4KB boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
-		& ~(0x100000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, &temp);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
-		| PCI_COMMAND_MASTER);
-}
-
-static void __init
-pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
-			int top_bus,
-			int current_bus,
-			int pci_devfn,
-			int sub_bus)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_PRIMARY_BUS, current_bus);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SECONDARY_BUS, sub_bus + 1);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, 0xff);
-
-	/* Align memory and I/O to 4KB and 4 byte boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
-		& ~(0x4 - 1);
-
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_IO_BASE_0, pciauto_lower_iospc);
-}
-
-static void __init
-pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
-			int top_bus,
-			int current_bus,
-			int pci_devfn,
-			int sub_bus)
-{
-	u32 temp;
-
-	/*
-	 * [jsun] we always bump up baselines a little, so that if there
-	 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
-	 * spaces.
-	 */
-	pciauto_lower_memspc += 1;
-	pciauto_lower_iospc += 1;
-
-	/*
-	 * Configure subordinate bus number.  The PCI subsystem
-	 * bus scan will renumber buses (reserving three additional
-	 * for this PCI<->CardBus bridge for the case where a CardBus
-	 * adapter contains a P2P or CB2CB bridge.
-	 */
-
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, sub_bus);
-
-	/*
-	 * Reserve an additional 4MB for mem space and 16KB for
-	 * I/O space.  This should cover any additional space
-	 * requirement of unusual CardBus devices with
-	 * additional bridges that can consume more address space.
-	 *
-	 * Although pcmcia-cs currently will reprogram bridge
-	 * windows, the goal is to add an option to leave them
-	 * alone and use the bridge window ranges as the regions
-	 * that are searched for free resources upon hot-insertion
-	 * of a device.  This will allow a PCI<->CardBus bridge
-	 * configured by this routine to happily live behind a
-	 * P2P bridge in a system.
-	 */
-	/* Align memory and I/O to 4KB and 4 byte boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
-		& ~(0x4 - 1);
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, &temp);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_MASTER);
-}
-
-#define	PCIAUTO_IDE_MODE_MASK		0x05
-
-static int __init
-pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
-{
-	int sub_bus;
-	u32 pci_devfn, pci_class, cmdstat, found_multi=0;
-	unsigned short vid, did;
-	unsigned char header_type;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-
-	sub_bus = current_bus;
-
-	if (hose->first_devfn)
-		devfn_start = hose->first_devfn;
-	if (hose->last_devfn)
-		devfn_stop = hose->last_devfn;
-
-	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-				       PCI_VENDOR_ID, &vid);
-
-		if (vid == 0xffff) continue;
-
-		early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
-				       PCI_HEADER_TYPE, &header_type);
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-				       PCI_DEVICE_ID, &did);
-
-		early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-					PCI_CLASS_REVISION, &pci_class);
-
-		DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
-			current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
-			pci_class >> 16, vid, did);
-		if (pci_class & 0xff)
-			DBG(" (rev %.2x)", pci_class & 0xff);
-		DBG("\n");
-
-		if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
-			DBG("        Bridge: primary=%.2x, secondary=%.2x\n",
-				current_bus, sub_bus + 1);
-			pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
-						     pci_devfn, sub_bus);
-			DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
-				sub_bus + 1,
-				pciauto_lower_iospc, pciauto_lower_memspc);
-			sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
-			DBG("Back to bus %.2x\n", current_bus);
-			pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
-							pci_devfn, sub_bus);
-			continue;
-		} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
-			DBG("  CARDBUS  Bridge: primary=%.2x, secondary=%.2x\n",
-				current_bus, sub_bus + 1);
-			DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
-			/* Place CardBus Socket/ExCA registers */
-			pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
-
-			pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
-					current_bus, pci_devfn, sub_bus);
-
-			DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
-				sub_bus + 1,
-				pciauto_lower_iospc, pciauto_lower_memspc);
-			sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
-			DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
-			pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
-					current_bus, pci_devfn, sub_bus);
-			continue;
-		} else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-
-			unsigned char prg_iface;
-
-			early_read_config_byte(hose, top_bus, current_bus,
-				pci_devfn, PCI_CLASS_PROG, &prg_iface);
-			if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
-				DBG("Skipping legacy mode IDE controller\n");
-				continue;
-			}
-		}
-
-		/*
-		 * Found a peripheral, enable some standard
-		 * settings
-		 */
-		early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-					PCI_COMMAND, &cmdstat);
-		early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-					 PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
-					 PCI_COMMAND_MEMORY |
-					 PCI_COMMAND_MASTER);
-		early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-					PCI_LATENCY_TIMER, 0x80);
-
-		/* Allocate PCI I/O and/or memory space */
-		pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
-	}
-	return sub_bus;
-}
-
-int __init
-pciauto_assign_resources(int busno, struct pci_channel *hose)
-{
-	/* setup resource limits */
-	io_resource_inuse = hose->io_resource;
-	mem_resource_inuse = hose->mem_resource;
-
-	pciauto_lower_iospc = io_resource_inuse->start;
-	pciauto_upper_iospc = io_resource_inuse->end + 1;
-	pciauto_lower_memspc = mem_resource_inuse->start;
-	pciauto_upper_memspc = mem_resource_inuse->end + 1;
-	DBG("Autoconfig PCI channel 0x%p\n", hose);
-	DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
-		busno, pciauto_lower_iospc, pciauto_upper_iospc, 
-		pciauto_lower_memspc, pciauto_upper_memspc);
-
-	return pciauto_bus_scan(hose, busno, busno);
-}
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
new file mode 100644
index 00000000000..210f9d4af14
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-dreamcast.c
@@ -0,0 +1,102 @@
+/*
+ * PCI support for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
+ *	Dreamcast PCI: Supports SEGA Broadband Adaptor only.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/pci.h>
+
+static struct resource gapspci_io_resource = {
+	.name	= "GAPSPCI IO",
+	.start	= GAPSPCI_BBA_CONFIG,
+	.end	= GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource gapspci_mem_resource = {
+	.name	= "GAPSPCI mem",
+	.start	= GAPSPCI_DMA_BASE,
+	.end	= GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct pci_channel dreamcast_pci_controller = {
+	.pci_ops	= &gapspci_pci_ops,
+	.io_resource	= &gapspci_io_resource,
+	.io_offset	= 0x00000000,
+	.mem_resource	= &gapspci_mem_resource,
+	.mem_offset	= 0x00000000,
+};
+
+/*
+ * gapspci init
+ */
+
+static int __init gapspci_init(void)
+{
+	char idbuf[16];
+	int i;
+
+	/*
+	 * FIXME: All of this wants documenting to some degree,
+	 * even some basic register definitions would be nice.
+	 *
+	 * I haven't seen anything this ugly since.. maple.
+	 */
+
+	for (i=0; i<16; i++)
+		idbuf[i] = inb(GAPSPCI_REGS+i);
+
+	if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
+		return -ENODEV;
+
+	outl(0x5a14a501, GAPSPCI_REGS+0x18);
+
+	for (i=0; i<1000000; i++)
+		cpu_relax();
+
+	if (inl(GAPSPCI_REGS+0x18) != 1)
+		return -EINVAL;
+
+	outl(0x01000000, GAPSPCI_REGS+0x20);
+	outl(0x01000000, GAPSPCI_REGS+0x24);
+
+	outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+	outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+
+	outl(1, GAPSPCI_REGS+0x14);
+	outl(1, GAPSPCI_REGS+0x34);
+
+	/* Setting Broadband Adapter */
+	outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+	outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+	outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+	outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+	outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+	outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+	outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+
+	register_pci_controller(&dreamcast_pci_controller);
+
+	return 0;
+}
+arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index a83dcf70c13..3d5296cde62 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -149,13 +149,10 @@
   #define SH4_PCIPDTR_PB0	  0x000000001	/* Port 0 Enable */
 #define SH4_PCIPDR		0x220		/* Port IO Data Register */
 
-/* Flags */
-#define SH4_PCIC_NO_RESET	0x0001
-
 /* arch/sh/kernel/drivers/pci/ops-sh4.c */
 extern struct pci_ops sh4_pci_ops;
-int sh4_pci_check_direct(void);
-int pci_fixup_pcic(void);
+int sh4_pci_check_direct(struct pci_channel *chan);
+int pci_fixup_pcic(struct pci_channel *chan);
 
 struct sh4_pci_address_space {
 	unsigned long base;
@@ -165,16 +162,18 @@ struct sh4_pci_address_space {
 struct sh4_pci_address_map {
 	struct sh4_pci_address_space window0;
 	struct sh4_pci_address_space window1;
-	unsigned long flags;
 };
 
-static inline void pci_write_reg(unsigned long val, unsigned long reg)
+static inline void pci_write_reg(struct pci_channel *chan,
+				 unsigned long val, unsigned long reg)
 {
-	ctrl_outl(val, PCI_REG(reg));
+	ctrl_outl(val, chan->reg_base + reg);
 }
 
-static inline unsigned long pci_read_reg(unsigned long reg)
+static inline unsigned long pci_read_reg(struct pci_channel *chan,
+					 unsigned long reg)
 {
-	return ctrl_inl(PCI_REG(reg));
+	return ctrl_inl(chan->reg_base + reg);
 }
+
 #endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 7a97438762c..873ed2b4405 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -89,8 +89,21 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
+static struct resource sh5_io_resource = { /* place holder */ };
+static struct resource sh5_mem_resource = { /* place holder */ };
+
+static struct pci_channel sh5pci_controller = {
+	.pci_ops		= &sh5_pci_ops,
+	.mem_resource		= &sh5_mem_resource,
+	.mem_offset		= 0x00000000,
+	.io_resource		= &sh5_io_resource,
+	.io_offset		= 0x00000000,
+};
+
+static int __init sh5pci_init(void)
 {
+	unsigned long memStart = __pa(memory_start);
+	unsigned long memSize = __pa(memory_end) - memStart;
 	u32 lsr0;
 	u32 uval;
 
@@ -106,12 +119,12 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
                 return -EINVAL;
         }
 
-	pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+	pcicr_virt = (unsigned long)ioremap_nocache(SH5PCI_ICR_BASE, 1024);
 	if (!pcicr_virt) {
 		panic("Unable to remap PCICR\n");
 	}
 
-	PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+	PCI_IO_AREA = (unsigned long)ioremap_nocache(SH5PCI_IO_BASE, 0x10000);
 	if (!PCI_IO_AREA) {
 		panic("Unable to remap PCIIO\n");
 	}
@@ -197,32 +210,14 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
         SH5PCI_WRITE(AINTM, ~0);
         SH5PCI_WRITE(PINTM, ~0);
 
-	return 0;
-}
+	sh5_io_resource.start = PCI_IO_AREA;
+	sh5_io_resource.end = PCI_IO_AREA + 0x10000;
 
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev = bus->self;
-	int i;
-
-	if (dev) {
-		for (i= 0; i < 3; i++) {
-			bus->resource[i] =
-				&dev->resource[PCI_BRIDGE_RESOURCES+i];
-			bus->resource[i]->name = bus->name;
-		}
-		bus->resource[0]->flags |= IORESOURCE_IO;
-		bus->resource[1]->flags |= IORESOURCE_MEM;
-
-		/* For now, propagate host limits to the bus;
-		 * we'll adjust them later. */
-		bus->resource[0]->end = 64*1024 - 1 ;
-		bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
-		bus->resource[0]->start = PCIBIOS_MIN_IO;
-		bus->resource[1]->start = PCIBIOS_MIN_MEM;
-
-		/* Turn off downstream PF memory address range by default */
-		bus->resource[2]->start = 1024*1024;
-		bus->resource[2]->end = bus->resource[2]->start - 1;
-	}
+	sh5_mem_resource.start = memStart;
+	sh5_mem_resource.end = memStart + memSize;
+
+	register_pci_controller(&sh5pci_controller);
+
+	return 0;
 }
+arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
index 7cff3fc04d3..f277628221f 100644
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -107,7 +107,4 @@ extern unsigned long pcicr_virt;
 
 extern struct pci_ops sh5_pci_ops;
 
-/* arch/sh/drivers/pci/pci-sh5.c */
-int sh5pci_init(unsigned long memStart, unsigned long memSize);
-
 #endif /* __PCI_SH5_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 3065eb184f0..70c1999a0ec 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -1,88 +1,100 @@
 /*
- *	Low-Level PCI Support for the SH7751
+ * Low-Level PCI Support for the SH7751
  *
- *  Dustin McIntire (dustin@sensoria.com)
- *	Derived from arch/i386/kernel/pci-*.c which bore the message:
- *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
+ *  Copyright (C) 2003 - 2009  Paul Mundt
+ *  Copyright (C) 2001  Dustin McIntire
  *
- *  Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- *  With cleanup by Paul van Gool <pvangool@mimotech.com>
- *
- *  May be copied or modified under the terms of the GNU General Public
- *  License.  See linux/COPYING for more information.
+ *  With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
  *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-#undef DEBUG
-
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/io.h>
 #include "pci-sh4.h"
 #include <asm/addrspace.h>
-#include <asm/io.h>
 
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
-static int __init sh7751_pci_init(void)
+static int __init __area_sdram_check(struct pci_channel *chan,
+				     unsigned int area)
 {
-	unsigned int id;
-	int ret;
-
-	pr_debug("PCI: Starting intialization.\n");
+	unsigned long word;
 
-	/* check for SH7751/SH7751R hardware */
-	id = pci_read_reg(SH7751_PCICONF0);
-	if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
-	    id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
-		pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
-		return -ENODEV;
-	}
-
-	if ((ret = sh4_pci_check_direct()) != 0)
-		return ret;
-
-	return pcibios_init_platform();
-}
-subsys_initcall(sh7751_pci_init);
-
-static int __init __area_sdram_check(unsigned int area)
-{
-	u32 word;
-
-	word = ctrl_inl(SH7751_BCR1);
+	word = __raw_readl(SH7751_BCR1);
 	/* check BCR for SDRAM in area */
 	if (((word >> area) & 1) == 0) {
-		printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
+		printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
 		       area, word);
 		return 0;
 	}
-	pci_write_reg(word, SH4_PCIBCR1);
+	pci_write_reg(chan, word, SH4_PCIBCR1);
 
-	word = (u16)ctrl_inw(SH7751_BCR2);
+	word = __raw_readw(SH7751_BCR2);
 	/* check BCR2 for 32bit SDRAM interface*/
 	if (((word >> (area << 1)) & 0x3) != 0x3) {
-		printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
+		printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
 		       area, word);
 		return 0;
 	}
-	pci_write_reg(word, SH4_PCIBCR2);
+	pci_write_reg(chan, word, SH4_PCIBCR2);
 
 	return 1;
 }
 
-int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
+static struct resource sh7751_io_resource = {
+	.name	= "SH7751_IO",
+	.start	= SH7751_PCI_IO_BASE,
+	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+	.name	= "SH7751_mem",
+	.start	= SH7751_PCI_MEMORY_BASE,
+	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+static struct pci_channel sh7751_pci_controller = {
+	.pci_ops	= &sh4_pci_ops,
+	.mem_resource	= &sh7751_mem_resource,
+	.mem_offset	= 0x00000000,
+	.io_resource	= &sh7751_io_resource,
+	.io_offset	= 0x00000000,
+	.io_map_base	= SH7751_PCI_IO_BASE,
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+	.window0	= {
+		.base	= SH7751_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+};
+
+static int __init sh7751_pci_init(void)
 {
-	u32 reg;
-	u32 word;
+	struct pci_channel *chan = &sh7751_pci_controller;
+	unsigned int id;
+	u32 word, reg;
+	int ret;
+
+	printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+	chan->reg_base = 0xfe200000;
+
+	/* check for SH7751/SH7751R hardware */
+	id = pci_read_reg(chan, SH7751_PCICONF0);
+	if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+	    id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+		pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+		return -ENODEV;
+	}
+
+	if ((ret = sh4_pci_check_direct(chan)) != 0)
+		return ret;
 
 	/* Set the BCR's to enable PCI access */
 	reg = ctrl_inl(SH7751_BCR1);
@@ -90,25 +102,10 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
 	ctrl_outl(reg, SH7751_BCR1);
 
 	/* Turn the clocks back on (not done in reset)*/
-	pci_write_reg(0, SH4_PCICLKR);
+	pci_write_reg(chan, 0, SH4_PCICLKR);
 	/* Clear Powerdown IRQ's (not done in reset) */
 	word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
-	pci_write_reg(word, SH4_PCIPINT);
-
-	/*
-	 * This code is unused for some boards as it is done in the
-	 * bootloader and doing it here means the MAC addresses loaded
-	 * by the bootloader get lost.
-	 */
-	if (!(map->flags & SH4_PCIC_NO_RESET)) {
-		/* toggle PCI reset pin */
-		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
-		pci_write_reg(word, SH4_PCICR);
-		/* Wait for a long time... not 1 sec. but long enough */
-		mdelay(100);
-		word = SH4_PCICR_PREFIX;
-		pci_write_reg(word, SH4_PCICR);
-	}
+	pci_write_reg(chan, word, SH4_PCIPINT);
 
 	/* set the command/status bits to:
 	 * Wait Cycle Control + Parity Enable + Bus Master +
@@ -116,89 +113,75 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
 	 */
 	word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
 	       SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
-	pci_write_reg(word, SH7751_PCICONF1);
+	pci_write_reg(chan, word, SH7751_PCICONF1);
 
 	/* define this host as the host bridge */
 	word = PCI_BASE_CLASS_BRIDGE << 24;
-	pci_write_reg(word, SH7751_PCICONF2);
+	pci_write_reg(chan, word, SH7751_PCICONF2);
 
 	/* Set IO and Mem windows to local address
 	 * Make PCI and local address the same for easy 1 to 1 mapping
-	 * Window0 = map->window0.size @ non-cached area base = SDRAM
-	 * Window1 = map->window1.size @ cached area base = SDRAM
 	 */
-	word = map->window0.size - 1;
-	pci_write_reg(word, SH4_PCILSR0);
-	word = map->window1.size - 1;
-	pci_write_reg(word, SH4_PCILSR1);
+	word = sh7751_pci_map.window0.size - 1;
+	pci_write_reg(chan, word, SH4_PCILSR0);
 	/* Set the values on window 0 PCI config registers */
-	word = P2SEGADDR(map->window0.base);
-	pci_write_reg(word, SH4_PCILAR0);
-	pci_write_reg(word, SH7751_PCICONF5);
-	/* Set the values on window 1 PCI config registers */
-	word =  PHYSADDR(map->window1.base);
-	pci_write_reg(word, SH4_PCILAR1);
-	pci_write_reg(word, SH7751_PCICONF6);
+	word = P2SEGADDR(sh7751_pci_map.window0.base);
+	pci_write_reg(chan, word, SH4_PCILAR0);
+	pci_write_reg(chan, word, SH7751_PCICONF5);
 
 	/* Set the local 16MB PCI memory space window to
 	 * the lowest PCI mapped address
 	 */
-	word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
+	word = chan->mem_resource->start & SH4_PCIMBR_MASK;
 	pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
-	pci_write_reg(word , SH4_PCIMBR);
-
-	/* Map IO space into PCI IO window
-	 * The IO window is 64K-PCIBIOS_MIN_IO in size
-	 * IO addresses will be translated to the
-	 * PCI IO window base address
-	 */
-	pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
-		 PCIBIOS_MIN_IO, (64 << 10),
-		 SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
+	pci_write_reg(chan, word , SH4_PCIMBR);
 
 	/* Make sure the MSB's of IO window are set to access PCI space
 	 * correctly */
-	word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
+	word = chan->io_resource->start & SH4_PCIIOBR_MASK;
 	pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
-	pci_write_reg(word, SH4_PCIIOBR);
+	pci_write_reg(chan, word, SH4_PCIIOBR);
 
 	/* Set PCI WCRx, BCRx's, copy from BSC locations */
 
 	/* check BCR for SDRAM in specified area */
-	switch (map->window0.base) {
-	case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break;
-	case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break;
-	case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break;
-	case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break;
-	case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break;
-	case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
-	case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
+	switch (sh7751_pci_map.window0.base) {
+	case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
+	case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
+	case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
+	case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
+	case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
+	case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
+	case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
 	}
 
 	if (!word)
-		return 0;
+		return -1;
 
 	/* configure the wait control registers */
 	word = ctrl_inl(SH7751_WCR1);
-	pci_write_reg(word, SH4_PCIWCR1);
+	pci_write_reg(chan, word, SH4_PCIWCR1);
 	word = ctrl_inl(SH7751_WCR2);
-	pci_write_reg(word, SH4_PCIWCR2);
+	pci_write_reg(chan, word, SH4_PCIWCR2);
 	word = ctrl_inl(SH7751_WCR3);
-	pci_write_reg(word, SH4_PCIWCR3);
+	pci_write_reg(chan, word, SH4_PCIWCR3);
 	word = ctrl_inl(SH7751_MCR);
-	pci_write_reg(word, SH4_PCIMCR);
+	pci_write_reg(chan, word, SH4_PCIMCR);
 
 	/* NOTE: I'm ignoring the PCI error IRQs for now..
 	 * TODO: add support for the internal error interrupts and
 	 * DMA interrupts...
 	 */
 
-	pci_fixup_pcic();
+	pci_fixup_pcic(chan);
 
 	/* SH7751 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */
 	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
-	pci_write_reg(word, SH4_PCICR);
+	pci_write_reg(chan, word, SH4_PCICR);
 
-	return 1;
+	register_pci_controller(chan);
+
+	return 0;
 }
+arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 68e3cb5e6be..4983a4d2035 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -26,7 +26,6 @@
 #define SH7751_PCI_IO_SIZE           0x40000     /* Size of IO window */
 
 #define SH7751_PCIREG_BASE           0xFE200000  /* PCI regs base address */
-#define PCI_REG(n)                  (SH7751_PCIREG_BASE+ n)
 
 #define SH7751_PCICONF0            0x0           /* PCI Config Reg 0 */
   #define SH7751_PCICONF0_DEVID      0xFFFF0000  /* Device ID */
@@ -58,7 +57,7 @@
   #define SH7751_PCICONF2_SCC        0x00FF0000  /* Sub-Class Code */
   #define SH7751_PCICONF2_RLPI       0x0000FF00  /* Programming Interface */
   #define SH7751_PCICONF2_REV        0x000000FF  /* Revision ID */
-#define SH7751_PCICONF3            0xC           /* PCI Config Reg 3 */ 
+#define SH7751_PCICONF3            0xC           /* PCI Config Reg 3 */
   #define SH7751_PCICONF3_BIST7      0x80000000  /* Bist Supported */
   #define SH7751_PCICONF3_BIST6      0x40000000  /* Bist Executing */
   #define SH7751_PCICONF3_BIST3_0    0x0F000000  /* Bist Passed */
@@ -73,12 +72,12 @@
   #define SH7751_PCICONF5_BASE       0xFFFFFFF0  /* Mem Space Base Addr */
   #define SH7751_PCICONF5_LAP        0x00000008  /* Prefetch Enabled */
   #define SH7751_PCICONF5_LAT        0x00000006  /* Local Memory type */
-  #define SH7751_PCICONF5_ASI        0x00000001  /* Address Space Type */  
+  #define SH7751_PCICONF5_ASI        0x00000001  /* Address Space Type */
 #define SH7751_PCICONF6            0x18          /* PCI Config Reg 6 */
   #define SH7751_PCICONF6_BASE       0xFFFFFFF0  /* Mem Space Base Addr */
   #define SH7751_PCICONF6_LAP        0x00000008  /* Prefetch Enabled */
   #define SH7751_PCICONF6_LAT        0x00000006  /* Local Memory type */
-  #define SH7751_PCICONF6_ASI        0x00000001  /* Address Space Type */  
+  #define SH7751_PCICONF6_ASI        0x00000001  /* Address Space Type */
 /* PCICONF7 - PCICONF10 are undefined */
 #define SH7751_PCICONF11           0x2C          /* PCI Config Reg 11 */
   #define SH7751_PCICONF11_SSID      0xFFFF0000  /* Subsystem ID */
@@ -127,9 +126,4 @@
 #define SH7751_CS5_BASE_ADDR       (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
 #define SH7751_CS6_BASE_ADDR       (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
 
-struct sh4_pci_address_map;
-
-/* arch/sh/drivers/pci/pci-sh7751.c */
-int sh7751_pcic_init(struct sh4_pci_address_map *map);
-
 #endif /* _PCI_SH7751_H_ */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index bae6a2cf047..323b92d565f 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,19 +1,12 @@
 /*
- *	Low-Level PCI Support for the SH7780
+ * Low-Level PCI Support for the SH7780
  *
- *  Dustin McIntire (dustin@sensoria.com)
- *	Derived from arch/i386/kernel/pci-*.c which bore the message:
- *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
- *
- *  Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- *  With cleanup by Paul van Gool <pvangool@mimotech.com>
- *
- *  May be copied or modified under the terms of the GNU General Public
- *  License.  See linux/COPYING for more information.
+ *  Copyright (C) 2005 - 2009  Paul Mundt
  *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-#undef DEBUG
-
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -22,135 +15,132 @@
 #include <linux/delay.h>
 #include "pci-sh4.h"
 
-#define INTC_BASE	0xffd00000
-#define INTC_ICR0	(INTC_BASE+0x0)
-#define INTC_ICR1	(INTC_BASE+0x1c)
-#define INTC_INTPRI	(INTC_BASE+0x10)
-#define INTC_INTREQ	(INTC_BASE+0x24)
-#define INTC_INTMSK0	(INTC_BASE+0x44)
-#define INTC_INTMSK1	(INTC_BASE+0x48)
-#define INTC_INTMSK2	(INTC_BASE+0x40080)
-#define INTC_INTMSKCLR0	(INTC_BASE+0x64)
-#define INTC_INTMSKCLR1	(INTC_BASE+0x68)
-#define INTC_INTMSKCLR2	(INTC_BASE+0x40084)
-#define INTC_INT2MSKR	(INTC_BASE+0x40038)
-#define INTC_INT2MSKCR	(INTC_BASE+0x4003c)
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+static struct pci_channel sh7780_pci_controller = {
+	.pci_ops	= &sh4_pci_ops,
+	.mem_resource	= &sh7785_mem_resource,
+	.mem_offset	= 0x00000000,
+	.io_resource	= &sh7785_io_resource,
+	.io_offset	= 0x00000000,
+	.io_map_base	= SH7780_PCI_IO_BASE,
+};
+
+static struct sh4_pci_address_map sh7780_pci_map = {
+	.window0	= {
+#if defined(CONFIG_32BIT)
+		.base	= SH7780_32BIT_DDR_BASE_ADDR,
+		.size	= 0x40000000,
+#else
+		.base	= SH7780_CS0_BASE_ADDR,
+		.size	= 0x20000000,
+#endif
+	},
+};
 
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
 static int __init sh7780_pci_init(void)
 {
+	struct pci_channel *chan = &sh7780_pci_controller;
 	unsigned int id;
-	int ret, match = 0;
-
-	pr_debug("PCI: Starting intialization.\n");
-
-	ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
-
-	/* check for SH7780/SH7780R hardware */
-	id = pci_read_reg(SH7780_PCIVID);
-	if ((id & 0xffff) == SH7780_VENDOR_ID) {
-		switch ((id >> 16) & 0xffff) {
-		case SH7763_DEVICE_ID:
-		case SH7780_DEVICE_ID:
-		case SH7781_DEVICE_ID:
-		case SH7785_DEVICE_ID:
-			match = 1;
-			break;
-		}
-	}
+	const char *type = NULL;
+	int ret;
+	u32 word;
 
-	if (unlikely(!match)) {
-		printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
+	printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+	chan->reg_base = 0xfe040000;
+
+	/* Enable CPU access to the PCIC registers. */
+	__raw_writel(PCIECR_ENBL, PCIECR);
+
+	id = __raw_readw(chan->reg_base + SH7780_PCIVID);
+	if (id != SH7780_VENDOR_ID) {
+		printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
 		return -ENODEV;
 	}
 
-	/* Setup the INTC */
-	if (mach_is_7780se()) {
-		/* ICR0: IRL=use separately */
-		ctrl_outl(0x00C00020, INTC_ICR0);
-		/* ICR1: detect low level(for 2ndcut) */
-		ctrl_outl(0xAAAA0000, INTC_ICR1);
-		/* INTPRI: priority=3(all) */
-		ctrl_outl(0x33333333, INTC_INTPRI);
+	id = __raw_readw(chan->reg_base + SH7780_PCIDID);
+	type = (id == SH7763_DEVICE_ID)	? "SH7763" :
+	       (id == SH7780_DEVICE_ID) ? "SH7780" :
+	       (id == SH7781_DEVICE_ID) ? "SH7781" :
+	       (id == SH7785_DEVICE_ID) ? "SH7785" :
+					  NULL;
+	if (unlikely(!type)) {
+		printk(KERN_ERR "PCI: Found an unsupported Renesas host "
+		       "controller, device id 0x%04x.\n", id);
+		return -EINVAL;
 	}
 
-	if ((ret = sh4_pci_check_direct()) != 0)
-		return ret;
+	printk(KERN_NOTICE "PCI: Found a Renesas %s host "
+	       "controller, revision %d.\n", type,
+	       __raw_readb(chan->reg_base + SH7780_PCIRID));
 
-	return pcibios_init_platform();
-}
-core_initcall(sh7780_pci_init);
-
-int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
-{
-	u32 word;
+	if ((ret = sh4_pci_check_direct(chan)) != 0)
+		return ret;
 
 	/*
-	 * This code is unused for some boards as it is done in the
-	 * bootloader and doing it here means the MAC addresses loaded
-	 * by the bootloader get lost.
-	 */
-	if (!(map->flags & SH4_PCIC_NO_RESET)) {
-		/* toggle PCI reset pin */
-		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
-		pci_write_reg(word, SH4_PCICR);
-		/* Wait for a long time... not 1 sec. but long enough */
-		mdelay(100);
-		word = SH4_PCICR_PREFIX;
-		pci_write_reg(word, SH4_PCICR);
-	}
-
-	/* set the command/status bits to:
-	 * Wait Cycle Control + Parity Enable + Bus Master +
-	 * Mem space enable
+	 * Set the class and sub-class codes.
 	 */
-	pci_write_reg(0x00000046, SH7780_PCICMD);
-
-	/* define this host as the host bridge */
-	word = PCI_BASE_CLASS_BRIDGE << 24;
-	pci_write_reg(word, SH7780_PCIRID);
+	__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
+		     chan->reg_base + SH7780_PCIBCC);
+	__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
+		     chan->reg_base + SH7780_PCISUB);
 
-	/* Set IO and Mem windows to local address
+	/*
+	 * Set IO and Mem windows to local address
 	 * Make PCI and local address the same for easy 1 to 1 mapping
 	 */
-	pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0);
-	pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1);
+	pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
 	/* Set the values on window 0 PCI config registers */
-	pci_write_reg(map->window0.base, SH4_PCILAR0);
-	pci_write_reg(map->window0.base, SH7780_PCIMBAR0);
-	/* Set the values on window 1 PCI config registers */
-	pci_write_reg(map->window1.base, SH4_PCILAR1);
-	pci_write_reg(map->window1.base, SH7780_PCIMBAR1);
-
-	/* Map IO space into PCI IO window
-	 * The IO window is 64K-PCIBIOS_MIN_IO in size
-	 * IO addresses will be translated to the
-	 * PCI IO window base address
-	 */
-	pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
-		 PCIBIOS_MIN_IO, (64 << 10),
-		 SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
+	pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
+	pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
 
-	/* NOTE: I'm ignoring the PCI error IRQs for now..
-	 * TODO: add support for the internal error interrupts and
-	 * DMA interrupts...
-	 */
+	pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+
+	/* Set up standard PCI config registers */
+	__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
+	__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
+	__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
+	__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+
+	__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
 
 	/* Apply any last-minute PCIC fixups */
-	pci_fixup_pcic();
+	pci_fixup_pcic(chan);
+
+	pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
+		      SH7780_PCIIOBR);
+	pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
+		      SH7780_PCIIOBMR);
 
 	/* SH7780 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */
 	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
-	pci_write_reg(word, SH4_PCICR);
+	pci_write_reg(chan, word, SH4_PCICR);
+
+	register_pci_controller(chan);
 
-	return 1;
+	return 0;
 }
+arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 93adc7119b7..4a52478c97c 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -20,9 +20,8 @@
 #define SH7785_DEVICE_ID	0x0007
 
 /* SH7780 Control Registers */
-#define	SH7780_PCI_VCR0		0xFE000000
-#define	SH7780_PCI_VCR1		0xFE000004
-#define	SH7780_PCI_VCR2		0xFE000008
+#define	PCIECR			0xFE000008
+#define PCIECR_ENBL		0x01
 
 /* SH7780 Specific Values */
 #define SH7780_PCI_CONFIG_BASE	0xFD000000	/* Config space base addr */
@@ -35,7 +34,6 @@
 #define SH7780_PCI_IO_SIZE	0x00400000	/* Size of IO window */
 
 #define SH7780_PCIREG_BASE	0xFE040000	/* PCI regs base address */
-#define PCI_REG(n)		(SH7780_PCIREG_BASE+n)
 
 /* SH7780 PCI Config Registers */
 #define SH7780_PCIVID		0x000		/* Vendor ID */
@@ -67,11 +65,6 @@
 #define SH7780_PCIPMCSR_BSE	0x046
 #define SH7780_PCICDD		0x047
 
-#define SH7780_PCICR		0x100		/* PCI Control Register */
-#define SH7780_PCILSR		0x104		/* PCI Local Space Register0 */
-#define SH7780_PCILSR1		0x108		/* PCI Local Space Register1 */
-#define SH7780_PCILAR0		0x10C		/* PCI Local Address Register1 */
-#define SH7780_PCILAR1		0x110		/* PCI Local Address Register1 */
 #define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
 #define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
 #define SH7780_PCIAIR		0x11C		/* Error Address Register */
@@ -106,9 +99,4 @@
 
 #define SH7780_32BIT_DDR_BASE_ADDR	0x40000000
 
-struct sh4_pci_address_map;
-
-/* arch/sh/drivers/pci/pci-sh7780.c */
-int sh7780_pcic_init(struct sh4_pci_address_map *map);
-
 #endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 0d6ac7a1db4..54d77cbb8b3 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -1,67 +1,156 @@
 /*
- * arch/sh/drivers/pci/pci.c
+ * New-style PCI core.
  *
- * Copyright (c) 2002 M. R. Brown  <mrbrown@linux-sh.org>
- * Copyright (c) 2004 - 2006 Paul Mundt  <lethal@linux-sh.org>
+ * Copyright (c) 2004 - 2009  Paul Mundt
+ * Copyright (c) 2002  M. R. Brown
  *
- * These functions are collected here to reduce duplication of common
- * code amongst the many platform-specific PCI support code files.
- *
- * These routines require the following board-specific routines:
- * void pcibios_fixup_irqs();
- *
- * See include/asm-sh/pci.h for more information.
+ * Modelled after arch/mips/pci/pci.c:
+ *  Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/types.h>
 #include <linux/dma-debug.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
 
-static int __init pcibios_init(void)
+unsigned long PCIBIOS_MIN_IO = 0x0000;
+unsigned long PCIBIOS_MIN_MEM = 0;
+
+/*
+ * The PCI controller list.
+ */
+static struct pci_channel *hose_head, **hose_tail = &hose_head;
+
+static int pci_initialized;
+
+static void __devinit pcibios_scanbus(struct pci_channel *hose)
 {
-	struct pci_channel *p;
+	static int next_busno;
 	struct pci_bus *bus;
-	int busno;
 
-#ifdef CONFIG_PCI_AUTO
-	/* assign resources */
-	busno = 0;
-	for (p = board_pci_channels; p->pci_ops != NULL; p++)
-		busno = pciauto_assign_resources(busno, p) + 1;
-#endif
+	bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+	if (bus) {
+		next_busno = bus->subordinate + 1;
+		/* Don't allow 8-bit bus number overflow inside the hose -
+		   reserve some space for bridges. */
+		if (next_busno > 224)
+			next_busno = 0;
+
+		pci_bus_size_bridges(bus);
+		pci_bus_assign_resources(bus);
+		pci_enable_bridges(bus);
+	}
+}
+
+static DEFINE_MUTEX(pci_scan_mutex);
 
-	/* scan the buses */
-	busno = 0;
-	for (p = board_pci_channels; p->pci_ops != NULL; p++) {
-		bus = pci_scan_bus(busno, p->pci_ops, p);
-		busno = bus->subordinate + 1;
+void __devinit register_pci_controller(struct pci_channel *hose)
+{
+	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+		goto out;
+	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+		release_resource(hose->mem_resource);
+		goto out;
 	}
 
+	*hose_tail = hose;
+	hose_tail = &hose->next;
+
+	/*
+	 * Do not panic here but later - this might hapen before console init.
+	 */
+	if (!hose->io_map_base) {
+		printk(KERN_WARNING
+		       "registering PCI controller with io_map_base unset\n");
+	}
+
+	/*
+	 * Scan the bus if it is register after the PCI subsystem
+	 * initialization.
+	 */
+	if (pci_initialized) {
+		mutex_lock(&pci_scan_mutex);
+		pcibios_scanbus(hose);
+		mutex_unlock(&pci_scan_mutex);
+	}
+
+	return;
+
+out:
+	printk(KERN_WARNING
+	       "Skipping PCI bus scan due to resource conflict\n");
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_channel *hose;
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (hose = hose_head; hose; hose = hose->next)
+		pcibios_scanbus(hose);
+
 	pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
 
 	dma_debug_add_bus(&pci_bus_type);
 
+	pci_initialized = 1;
+
 	return 0;
 }
 subsys_initcall(pcibios_init);
 
+static void pcibios_fixup_device_resources(struct pci_dev *dev,
+	struct pci_bus *bus)
+{
+	/* Update device resources.  */
+	struct pci_channel *hose = bus->sysdata;
+	unsigned long offset = 0;
+	int i;
+
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		if (!dev->resource[i].start)
+			continue;
+		if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
+			continue;
+		if (dev->resource[i].flags & IORESOURCE_IO)
+			offset = hose->io_offset;
+		else if (dev->resource[i].flags & IORESOURCE_MEM)
+			offset = hose->mem_offset;
+
+		dev->resource[i].start += offset;
+		dev->resource[i].end += offset;
+	}
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
  */
-void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
-	pci_read_bridge_bases(bus);
-}
+	struct pci_dev *dev = bus->self;
+	struct list_head *ln;
+	struct pci_channel *chan = bus->sysdata;
 
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
-			    __attribute__ ((weak));
+	if (!dev) {
+		bus->resource[0] = chan->io_resource;
+		bus->resource[1] = chan->mem_resource;
+	}
+
+	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+		dev = pci_dev_b(ln);
+
+		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+			pcibios_fixup_device_resources(dev, bus);
+	}
+}
 
 /*
  * We need to avoid collisions with `mirrored' VGA ports
@@ -72,14 +161,58 @@ void pcibios_align_resource(void *data, struct resource *res,
 void pcibios_align_resource(void *data, struct resource *res,
 			    resource_size_t size, resource_size_t align)
 {
+	struct pci_dev *dev = data;
+	struct pci_channel *chan = dev->sysdata;
+	resource_size_t start = res->start;
+
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
+		if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
+			start = PCIBIOS_MIN_IO + chan->io_resource->start;
 
+		/*
+                 * Put everything into 0x00-0xff region modulo 0x400.
+		 */
 		if (start & 0x300) {
 			start = (start + 0x3ff) & ~0x3ff;
 			res->start = start;
 		}
+	} else if (res->flags & IORESOURCE_MEM) {
+		if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
+			start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
 	}
+
+	res->start = start;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res)
+{
+	struct pci_channel *hose = dev->sysdata;
+	unsigned long offset = 0;
+
+	if (res->flags & IORESOURCE_IO)
+		offset = hose->io_offset;
+	else if (res->flags & IORESOURCE_MEM)
+		offset = hose->mem_offset;
+
+	region->start = res->start - offset;
+	region->end = res->end - offset;
+}
+
+void __devinit
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region)
+{
+	struct pci_channel *hose = dev->sysdata;
+	unsigned long offset = 0;
+
+	if (res->flags & IORESOURCE_IO)
+		offset = hose->io_offset;
+	else if (res->flags & IORESOURCE_MEM)
+		offset = hose->mem_offset;
+
+	res->start = region->start + offset;
+	res->end = region->end + offset;
 }
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
@@ -90,13 +223,21 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		if (!(mask & (1 << idx)))
+	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1<<idx)))
 			continue;
+
 		r = &dev->resource[idx];
+		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
 		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
+			printk(KERN_ERR "PCI: Device %s not available "
+			       "because of resource collisions\n",
+			       pci_name(dev));
 			return -EINVAL;
 		}
 		if (r->flags & IORESOURCE_IO)
@@ -104,10 +245,8 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 		if (r->flags & IORESOURCE_MEM)
 			cmd |= PCI_COMMAND_MEMORY;
 	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
 	if (cmd != old_cmd) {
-		printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n",
+		printk("PCI: Enabling device %s (%04x -> %04x)\n",
 		       pci_name(dev), old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
@@ -140,6 +279,43 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
+char * __devinit pcibios_setup(char *str)
+{
+	return str;
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	/*
+	 * I/O space can be accessed via normal processor loads and stores on
+	 * this platform but for now we elect not to do this and portable
+	 * drivers should not do this anyway.
+	 */
+	if (mmap_state == pci_mmap_io)
+		return -EINVAL;
+
+	/*
+	 * Ignore write-combine; for now only return uncached mappings.
+	 */
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+
+static void __iomem *ioport_map_pci(struct pci_dev *dev,
+				    unsigned long port, unsigned int nr)
+{
+	struct pci_channel *chan = dev->sysdata;
+
+	if (!chan->io_map_base)
+		chan->io_map_base = generic_io_base;
+
+	return (void __iomem *)(chan->io_map_base + port);
+}
+
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 {
 	resource_size_t start = pci_resource_start(dev, bar);
@@ -151,20 +327,24 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 	if (maxlen && len > maxlen)
 		len = maxlen;
 
+	if (flags & IORESOURCE_IO)
+		return ioport_map_pci(dev, start, len);
+
 	/*
 	 * Presently the IORESOURCE_MEM case is a bit special, most
 	 * SH7751 style PCI controllers have PCI memory at a fixed
-	 * location in the address space where no remapping is desired
-	 * (typically at 0xfd000000, but is_pci_memaddr() will know
-	 * best). With the IORESOURCE_MEM case more care has to be taken
+	 * location in the address space where no remapping is desired.
+	 * With the IORESOURCE_MEM case more care has to be taken
 	 * to inhibit page table mapping for legacy cores, but this is
 	 * punted off to __ioremap().
 	 *					-- PFM.
 	 */
-	if (flags & IORESOURCE_IO)
-		return ioport_map(start, len);
-	if (flags & IORESOURCE_MEM)
-		return ioremap(start, len);
+	if (flags & IORESOURCE_MEM) {
+		if (flags & IORESOURCE_CACHEABLE)
+			return ioremap(start, len);
+
+		return ioremap_nocache(start, len);
+	}
 
 	return NULL;
 }
@@ -175,3 +355,10 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
 	iounmap(addr);
 }
 EXPORT_SYMBOL(pci_iounmap);
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
+#endif
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index 4b00b78e3f4..b040e1e0861 100644
--- a/arch/sh/include/asm/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
@@ -104,4 +104,31 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 	: "t");
 }
 
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+
+	return c != (u);
+}
+
 #endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index 6327ffbb199..157c320272c 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -45,7 +45,7 @@
 #define atomic_inc(v) atomic_add(1,(v))
 #define atomic_dec(v) atomic_sub(1,(v))
 
-#ifndef CONFIG_GUSA_RB
+#if !defined(CONFIG_GUSA_RB) && !defined(CONFIG_CPU_SH4A)
 static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	int ret;
@@ -73,7 +73,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 	return ret != u;
 }
-#endif
+#endif /* !CONFIG_GUSA_RB && !CONFIG_CPU_SH4A */
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
@@ -84,5 +84,5 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/sh/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 09acbc32d6c..4c5462daa74 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -75,7 +75,5 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
-#define HAVE_ARCH_UNMAPPED_AREA
-
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
index 2f6c9627bc1..9fe7d7f8af4 100644
--- a/arch/sh/include/asm/clock.h
+++ b/arch/sh/include/asm/clock.h
@@ -1,9 +1,9 @@
 #ifndef __ASM_SH_CLOCK_H
 #define __ASM_SH_CLOCK_H
 
-#include <linux/kref.h>
 #include <linux/list.h>
 #include <linux/seq_file.h>
+#include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 
@@ -11,9 +11,9 @@ struct clk;
 
 struct clk_ops {
 	void (*init)(struct clk *clk);
-	void (*enable)(struct clk *clk);
+	int (*enable)(struct clk *clk);
 	void (*disable)(struct clk *clk);
-	void (*recalc)(struct clk *clk);
+	unsigned long (*recalc)(struct clk *clk);
 	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
 	int (*set_parent)(struct clk *clk, struct clk *parent);
 	long (*round_rate)(struct clk *clk, unsigned long rate);
@@ -28,43 +28,47 @@ struct clk {
 	struct clk		*parent;
 	struct clk_ops		*ops;
 
-	struct kref		kref;
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
+
+	int			usecount;
 
 	unsigned long		rate;
 	unsigned long		flags;
+
+	void __iomem		*enable_reg;
+	unsigned int		enable_bit;
+
 	unsigned long		arch_flags;
+	void			*priv;
+	struct dentry		*dentry;
+	struct cpufreq_frequency_table *freq_table;
+};
+
+struct clk_lookup {
+	struct list_head	node;
+	const char		*dev_id;
+	const char		*con_id;
+	struct clk		*clk;
 };
 
-#define CLK_ALWAYS_ENABLED	(1 << 0)
-#define CLK_RATE_PROPAGATES	(1 << 1)
+#define CLK_ENABLE_ON_INIT	(1 << 0)
 
 /* Should be defined by processor-specific code */
-void arch_init_clk_ops(struct clk_ops **, int type);
+void __deprecated arch_init_clk_ops(struct clk_ops **, int type);
 int __init arch_clk_init(void);
 
 /* arch/sh/kernel/cpu/clock.c */
 int clk_init(void);
-
-void clk_recalc_rate(struct clk *);
-
+unsigned long followparent_recalc(struct clk *);
+void recalculate_root_clocks(void);
+void propagate_rate(struct clk *);
+int clk_reparent(struct clk *child, struct clk *parent);
 int clk_register(struct clk *);
 void clk_unregister(struct clk *);
 
-static inline int clk_always_enable(const char *id)
-{
-	struct clk *clk;
-	int ret;
-
-	clk = clk_get(NULL, id);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	ret = clk_enable(clk);
-	if (ret)
-		clk_put(clk);
-
-	return ret;
-}
+/* arch/sh/kernel/cpu/clock-cpg.c */
+int __init __deprecated cpg_clk_init(void);
 
 /* the exported API, in addition to clk_set_rate */
 /**
@@ -96,4 +100,63 @@ enum clk_sh_algo_id {
 
 	IP_N1,
 };
+
+struct clk_div_mult_table {
+	unsigned int *divisors;
+	unsigned int nr_divisors;
+	unsigned int *multipliers;
+	unsigned int nr_multipliers;
+};
+
+struct cpufreq_frequency_table;
+void clk_rate_table_build(struct clk *clk,
+			  struct cpufreq_frequency_table *freq_table,
+			  int nr_freqs,
+			  struct clk_div_mult_table *src_table,
+			  unsigned long *bitmap);
+
+long clk_rate_table_round(struct clk *clk,
+			  struct cpufreq_frequency_table *freq_table,
+			  unsigned long rate);
+
+int clk_rate_table_find(struct clk *clk,
+			struct cpufreq_frequency_table *freq_table,
+			unsigned long rate);
+
+#define SH_CLK_MSTP32(_name, _id, _parent, _enable_reg,	\
+	    _enable_bit, _flags)			\
+{							\
+	.name		= _name,			\
+	.id		= _id,				\
+	.parent		= _parent,			\
+	.enable_reg	= (void __iomem *)_enable_reg,	\
+	.enable_bit	= _enable_bit,			\
+	.flags		= _flags,			\
+}
+
+int sh_clk_mstp32_register(struct clk *clks, int nr);
+
+#define SH_CLK_DIV4(_name, _parent, _reg, _shift, _div_bitmap, _flags)	\
+{									\
+	.name = _name,							\
+	.parent = _parent,						\
+	.enable_reg = (void __iomem *)_reg,				\
+	.enable_bit = _shift,						\
+	.arch_flags = _div_bitmap,					\
+	.flags = _flags,						\
+}
+
+int sh_clk_div4_register(struct clk *clks, int nr,
+			 struct clk_div_mult_table *table);
+
+#define SH_CLK_DIV6(_name, _parent, _reg, _flags)	\
+{							\
+	.name = _name,					\
+	.parent = _parent,				\
+	.enable_reg = (void __iomem *)_reg,		\
+	.flags = _flags,				\
+}
+
+int sh_clk_div6_register(struct clk *clks, int nr);
+
 #endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
index 0fac3da536c..47136661a20 100644
--- a/arch/sh/include/asm/cmpxchg-llsc.h
+++ b/arch/sh/include/asm/cmpxchg-llsc.h
@@ -55,7 +55,7 @@ __cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new)
 		"mov		%0, %1				\n\t"
 		"cmp/eq		%1, %3				\n\t"
 		"bf		2f				\n\t"
-		"mov		%3, %0				\n\t"
+		"mov		%4, %0				\n\t"
 		"2:						\n\t"
 		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index efd511d0803..8688a88303e 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -10,3 +10,5 @@ struct platform_device;
 int platform_resource_setup_memory(struct platform_device *pdev,
 				   char *name, unsigned long memsize);
 
+void plat_early_device_setup(void);
+
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
index d3b2b4f109e..5d84df5e27f 100644
--- a/arch/sh/include/asm/flat.h
+++ b/arch/sh/include/asm/flat.h
@@ -12,7 +12,6 @@
 #ifndef __ASM_SH_FLAT_H
 #define __ASM_SH_FLAT_H
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
index 52b4b623827..977355f0a48 100644
--- a/arch/sh/include/asm/hd64461.h
+++ b/arch/sh/include/asm/hd64461.h
@@ -13,18 +13,20 @@
 #define	HD64461_PCC_WINDOW	0x01000000
 
 /* Area 6 - Slot 0 - memory and/or IO card */
-#define	HD64461_PCC0_BASE	(CONFIG_HD64461_IOBASE + 0x8000000)
+#define HD64461_IOBASE		0xb0000000
+#define HD64461_IO_OFFSET(x)	(HD64461_IOBASE + (x))
+#define	HD64461_PCC0_BASE	HD64461_IO_OFFSET(0x8000000)
 #define	HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)				/* 0xb80000000 */
 #define	HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)		/* 0xb90000000 */
 #define	HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)	/* 0xba0000000 */
 
 /* Area 5 - Slot 1 - memory card only */
-#define	HD64461_PCC1_BASE	(CONFIG_HD64461_IOBASE + 0x4000000)
+#define	HD64461_PCC1_BASE	HD64461_IO_OFFSET(0x4000000)
 #define	HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)				/* 0xb4000000 */
 #define	HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)		/* 0xb5000000 */
 
 /* Standby Control Register for HD64461 */
-#define	HD64461_STBCR			CONFIG_HD64461_IOBASE
+#define	HD64461_STBCR			HD64461_IO_OFFSET(0x00000000)
 #define	HD64461_STBCR_CKIO_STBY		0x2000
 #define	HD64461_STBCR_SAFECKE_IST	0x1000
 #define	HD64461_STBCR_SLCKE_IST		0x0800
@@ -41,19 +43,19 @@
 #define	HD64461_STBCR_SURTST		0x0001
 
 /* System Configuration Register */
-#define	HD64461_SYSCR		(CONFIG_HD64461_IOBASE + 0x02)
+#define	HD64461_SYSCR		HD64461_IO_OFFSET(0x02)
 
 /* CPU Data Bus Control Register */
-#define	HD64461_SCPUCR		(CONFIG_HD64461_IOBASE + 0x04)
+#define	HD64461_SCPUCR		HD64461_IO_OFFSET(0x04)
 
 /* Base Address Register */
-#define	HD64461_LCDCBAR		(CONFIG_HD64461_IOBASE + 0x1000)
+#define	HD64461_LCDCBAR		HD64461_IO_OFFSET(0x1000)
 
 /* Line increment address */
-#define	HD64461_LCDCLOR		(CONFIG_HD64461_IOBASE + 0x1002)
+#define	HD64461_LCDCLOR		HD64461_IO_OFFSET(0x1002)
 
 /* Controls LCD controller */
-#define	HD64461_LCDCCR		(CONFIG_HD64461_IOBASE + 0x1004)
+#define	HD64461_LCDCCR		HD64461_IO_OFFSET(0x1004)
 
 /* LCCDR control bits */
 #define	HD64461_LCDCCR_STBACK	0x0400	/* Standby Back */
@@ -64,30 +66,30 @@
 #define	HD64461_LCDCCR_SPON	0x0010	/* Start Power On */
 
 /* Controls LCD (1) */
-#define	HD64461_LDR1		(CONFIG_HD64461_IOBASE + 0x1010)
+#define	HD64461_LDR1		HD64461_IO_OFFSET(0x1010)
 #define	HD64461_LDR1_DON	0x01	/* Display On */
 #define	HD64461_LDR1_DINV	0x80	/* Display Invert */
 
 /* Controls LCD (2) */
-#define	HD64461_LDR2		(CONFIG_HD64461_IOBASE + 0x1012)
-#define	HD64461_LDHNCR		(CONFIG_HD64461_IOBASE + 0x1014)	/* Number of horizontal characters */
-#define	HD64461_LDHNSR		(CONFIG_HD64461_IOBASE + 0x1016)	/* Specify output start position + width of CL1 */
-#define	HD64461_LDVNTR		(CONFIG_HD64461_IOBASE + 0x1018)	/* Specify total vertical lines */
-#define	HD64461_LDVNDR		(CONFIG_HD64461_IOBASE + 0x101a)	/* specify number of display vertical lines */
-#define	HD64461_LDVSPR		(CONFIG_HD64461_IOBASE + 0x101c)	/* specify vertical synchronization pos and AC nr */
+#define	HD64461_LDR2		HD64461_IO_OFFSET(0x1012)
+#define	HD64461_LDHNCR		HD64461_IO_OFFSET(0x1014)	/* Number of horizontal characters */
+#define	HD64461_LDHNSR		HD64461_IO_OFFSET(0x1016)	/* Specify output start position + width of CL1 */
+#define	HD64461_LDVNTR		HD64461_IO_OFFSET(0x1018)	/* Specify total vertical lines */
+#define	HD64461_LDVNDR		HD64461_IO_OFFSET(0x101a)	/* specify number of display vertical lines */
+#define	HD64461_LDVSPR		HD64461_IO_OFFSET(0x101c)	/* specify vertical synchronization pos and AC nr */
 
 /* Controls LCD (3) */
-#define	HD64461_LDR3		(CONFIG_HD64461_IOBASE + 0x101e)
+#define	HD64461_LDR3		HD64461_IO_OFFSET(0x101e)
 
 /* Palette Registers */
-#define	HD64461_CPTWAR		(CONFIG_HD64461_IOBASE + 0x1030)	/* Color Palette Write Address Register */
-#define	HD64461_CPTWDR		(CONFIG_HD64461_IOBASE + 0x1032)	/* Color Palette Write Data Register */
-#define	HD64461_CPTRAR		(CONFIG_HD64461_IOBASE + 0x1034)	/* Color Palette Read Address Register */
-#define	HD64461_CPTRDR		(CONFIG_HD64461_IOBASE + 0x1036)	/* Color Palette Read Data Register */
+#define	HD64461_CPTWAR		HD64461_IO_OFFSET(0x1030)	/* Color Palette Write Address Register */
+#define	HD64461_CPTWDR		HD64461_IO_OFFSET(0x1032)	/* Color Palette Write Data Register */
+#define	HD64461_CPTRAR		HD64461_IO_OFFSET(0x1034)	/* Color Palette Read Address Register */
+#define	HD64461_CPTRDR		HD64461_IO_OFFSET(0x1036)	/* Color Palette Read Data Register */
 
-#define	HD64461_GRDOR		(CONFIG_HD64461_IOBASE + 0x1040)	/* Display Resolution Offset Register */
-#define	HD64461_GRSCR		(CONFIG_HD64461_IOBASE + 0x1042)	/* Solid Color Register */
-#define	HD64461_GRCFGR		(CONFIG_HD64461_IOBASE + 0x1044)	/* Accelerator Configuration Register */
+#define	HD64461_GRDOR		HD64461_IO_OFFSET(0x1040)	/* Display Resolution Offset Register */
+#define	HD64461_GRSCR		HD64461_IO_OFFSET(0x1042)	/* Solid Color Register */
+#define	HD64461_GRCFGR		HD64461_IO_OFFSET(0x1044)	/* Accelerator Configuration Register */
 
 #define	HD64461_GRCFGR_ACCSTATUS	0x10	/* Accelerator Status */
 #define	HD64461_GRCFGR_ACCRESET		0x08	/* Accelerator Reset */
@@ -97,41 +99,41 @@
 #define	HD64461_GRCFGR_COLORDEPTH8	0x01	/* Sets Colordepth 8 for Accelerator */
 
 /* Line Drawing Registers */
-#define	HD64461_LNSARH		(CONFIG_HD64461_IOBASE + 0x1046)	/* Line Start Address Register (H) */
-#define	HD64461_LNSARL		(CONFIG_HD64461_IOBASE + 0x1048)	/* Line Start Address Register (L) */
-#define	HD64461_LNAXLR		(CONFIG_HD64461_IOBASE + 0x104a)	/* Axis Pixel Length Register */
-#define	HD64461_LNDGR		(CONFIG_HD64461_IOBASE + 0x104c)	/* Diagonal Register */
-#define	HD64461_LNAXR		(CONFIG_HD64461_IOBASE + 0x104e)	/* Axial Register */
-#define	HD64461_LNERTR		(CONFIG_HD64461_IOBASE + 0x1050)	/* Start Error Term Register */
-#define	HD64461_LNMDR		(CONFIG_HD64461_IOBASE + 0x1052)	/* Line Mode Register */
+#define	HD64461_LNSARH		HD64461_IO_OFFSET(0x1046)	/* Line Start Address Register (H) */
+#define	HD64461_LNSARL		HD64461_IO_OFFSET(0x1048)	/* Line Start Address Register (L) */
+#define	HD64461_LNAXLR		HD64461_IO_OFFSET(0x104a)	/* Axis Pixel Length Register */
+#define	HD64461_LNDGR		HD64461_IO_OFFSET(0x104c)	/* Diagonal Register */
+#define	HD64461_LNAXR		HD64461_IO_OFFSET(0x104e)	/* Axial Register */
+#define	HD64461_LNERTR		HD64461_IO_OFFSET(0x1050)	/* Start Error Term Register */
+#define	HD64461_LNMDR		HD64461_IO_OFFSET(0x1052)	/* Line Mode Register */
 
 /* BitBLT Registers */
-#define	HD64461_BBTSSARH	(CONFIG_HD64461_IOBASE + 0x1054)	/* Source Start Address Register (H) */
-#define	HD64461_BBTSSARL	(CONFIG_HD64461_IOBASE + 0x1056)	/* Source Start Address Register (L) */
-#define	HD64461_BBTDSARH	(CONFIG_HD64461_IOBASE + 0x1058)	/* Destination Start Address Register (H) */
-#define	HD64461_BBTDSARL	(CONFIG_HD64461_IOBASE + 0x105a)	/* Destination Start Address Register (L) */
-#define	HD64461_BBTDWR		(CONFIG_HD64461_IOBASE + 0x105c)	/* Destination Block Width Register */
-#define	HD64461_BBTDHR		(CONFIG_HD64461_IOBASE + 0x105e)	/* Destination Block Height Register */
-#define	HD64461_BBTPARH		(CONFIG_HD64461_IOBASE + 0x1060)	/* Pattern Start Address Register (H) */
-#define	HD64461_BBTPARL		(CONFIG_HD64461_IOBASE + 0x1062)	/* Pattern Start Address Register (L) */
-#define	HD64461_BBTMARH		(CONFIG_HD64461_IOBASE + 0x1064)	/* Mask Start Address Register (H) */
-#define	HD64461_BBTMARL		(CONFIG_HD64461_IOBASE + 0x1066)	/* Mask Start Address Register (L) */
-#define	HD64461_BBTROPR		(CONFIG_HD64461_IOBASE + 0x1068)	/* ROP Register */
-#define	HD64461_BBTMDR		(CONFIG_HD64461_IOBASE + 0x106a)	/* BitBLT Mode Register */
+#define	HD64461_BBTSSARH	HD64461_IO_OFFSET(0x1054)	/* Source Start Address Register (H) */
+#define	HD64461_BBTSSARL	HD64461_IO_OFFSET(0x1056)	/* Source Start Address Register (L) */
+#define	HD64461_BBTDSARH	HD64461_IO_OFFSET(0x1058)	/* Destination Start Address Register (H) */
+#define	HD64461_BBTDSARL	HD64461_IO_OFFSET(0x105a)	/* Destination Start Address Register (L) */
+#define	HD64461_BBTDWR		HD64461_IO_OFFSET(0x105c)	/* Destination Block Width Register */
+#define	HD64461_BBTDHR		HD64461_IO_OFFSET(0x105e)	/* Destination Block Height Register */
+#define	HD64461_BBTPARH		HD64461_IO_OFFSET(0x1060)	/* Pattern Start Address Register (H) */
+#define	HD64461_BBTPARL		HD64461_IO_OFFSET(0x1062)	/* Pattern Start Address Register (L) */
+#define	HD64461_BBTMARH		HD64461_IO_OFFSET(0x1064)	/* Mask Start Address Register (H) */
+#define	HD64461_BBTMARL		HD64461_IO_OFFSET(0x1066)	/* Mask Start Address Register (L) */
+#define	HD64461_BBTROPR		HD64461_IO_OFFSET(0x1068)	/* ROP Register */
+#define	HD64461_BBTMDR		HD64461_IO_OFFSET(0x106a)	/* BitBLT Mode Register */
 
 /* PC Card Controller Registers */
 /* Maps to Physical Area 6 */
-#define	HD64461_PCC0ISR		(CONFIG_HD64461_IOBASE + 0x2000)	/* socket 0 interface status */
-#define	HD64461_PCC0GCR		(CONFIG_HD64461_IOBASE + 0x2002)	/* socket 0 general control */
-#define	HD64461_PCC0CSCR	(CONFIG_HD64461_IOBASE + 0x2004)	/* socket 0 card status change */
-#define	HD64461_PCC0CSCIER	(CONFIG_HD64461_IOBASE + 0x2006)	/* socket 0 card status change interrupt enable */
-#define	HD64461_PCC0SCR		(CONFIG_HD64461_IOBASE + 0x2008)	/* socket 0 software control */
+#define	HD64461_PCC0ISR		HD64461_IO_OFFSET(0x2000)	/* socket 0 interface status */
+#define	HD64461_PCC0GCR		HD64461_IO_OFFSET(0x2002)	/* socket 0 general control */
+#define	HD64461_PCC0CSCR	HD64461_IO_OFFSET(0x2004)	/* socket 0 card status change */
+#define	HD64461_PCC0CSCIER	HD64461_IO_OFFSET(0x2006)	/* socket 0 card status change interrupt enable */
+#define	HD64461_PCC0SCR		HD64461_IO_OFFSET(0x2008)	/* socket 0 software control */
 /* Maps to Physical Area 5 */
-#define	HD64461_PCC1ISR		(CONFIG_HD64461_IOBASE + 0x2010)	/* socket 1 interface status */
-#define	HD64461_PCC1GCR		(CONFIG_HD64461_IOBASE + 0x2012)	/* socket 1 general control */
-#define	HD64461_PCC1CSCR	(CONFIG_HD64461_IOBASE + 0x2014)	/* socket 1 card status change */
-#define	HD64461_PCC1CSCIER	(CONFIG_HD64461_IOBASE + 0x2016)	/* socket 1 card status change interrupt enable */
-#define	HD64461_PCC1SCR		(CONFIG_HD64461_IOBASE + 0x2018)	/* socket 1 software control */
+#define	HD64461_PCC1ISR		HD64461_IO_OFFSET(0x2010)	/* socket 1 interface status */
+#define	HD64461_PCC1GCR		HD64461_IO_OFFSET(0x2012)	/* socket 1 general control */
+#define	HD64461_PCC1CSCR	HD64461_IO_OFFSET(0x2014)	/* socket 1 card status change */
+#define	HD64461_PCC1CSCIER	HD64461_IO_OFFSET(0x2016)	/* socket 1 card status change interrupt enable */
+#define	HD64461_PCC1SCR		HD64461_IO_OFFSET(0x2018)	/* socket 1 software control */
 
 /* PCC Interface Status Register */
 #define	HD64461_PCCISR_READY		0x80	/* card ready */
@@ -189,41 +191,41 @@
 #define	HD64461_PCCSCR_SWP		0x01	/* write protect */
 
 /* PCC0 Output Pins Control Register */
-#define	HD64461_P0OCR		(CONFIG_HD64461_IOBASE + 0x202a)
+#define	HD64461_P0OCR		HD64461_IO_OFFSET(0x202a)
 
 /* PCC1 Output Pins Control Register */
-#define	HD64461_P1OCR		(CONFIG_HD64461_IOBASE + 0x202c)
+#define	HD64461_P1OCR		HD64461_IO_OFFSET(0x202c)
 
 /* PC Card General Control Register */
-#define	HD64461_PGCR		(CONFIG_HD64461_IOBASE + 0x202e)
+#define	HD64461_PGCR		HD64461_IO_OFFSET(0x202e)
 
 /* Port Control Registers */
-#define	HD64461_GPACR		(CONFIG_HD64461_IOBASE + 0x4000)	/* Port A - Handles IRDA/TIMER */
-#define	HD64461_GPBCR		(CONFIG_HD64461_IOBASE + 0x4002)	/* Port B - Handles UART */
-#define	HD64461_GPCCR		(CONFIG_HD64461_IOBASE + 0x4004)	/* Port C - Handles PCMCIA 1 */
-#define	HD64461_GPDCR		(CONFIG_HD64461_IOBASE + 0x4006)	/* Port D - Handles PCMCIA 1 */
+#define	HD64461_GPACR		HD64461_IO_OFFSET(0x4000)	/* Port A - Handles IRDA/TIMER */
+#define	HD64461_GPBCR		HD64461_IO_OFFSET(0x4002)	/* Port B - Handles UART */
+#define	HD64461_GPCCR		HD64461_IO_OFFSET(0x4004)	/* Port C - Handles PCMCIA 1 */
+#define	HD64461_GPDCR		HD64461_IO_OFFSET(0x4006)	/* Port D - Handles PCMCIA 1 */
 
 /* Port Control Data Registers */
-#define	HD64461_GPADR		(CONFIG_HD64461_IOBASE + 0x4010)	/* A */
-#define	HD64461_GPBDR		(CONFIG_HD64461_IOBASE + 0x4012)	/* B */
-#define	HD64461_GPCDR		(CONFIG_HD64461_IOBASE + 0x4014)	/* C */
-#define	HD64461_GPDDR		(CONFIG_HD64461_IOBASE + 0x4016)	/* D */
+#define	HD64461_GPADR		HD64461_IO_OFFSET(0x4010)	/* A */
+#define	HD64461_GPBDR		HD64461_IO_OFFSET(0x4012)	/* B */
+#define	HD64461_GPCDR		HD64461_IO_OFFSET(0x4014)	/* C */
+#define	HD64461_GPDDR		HD64461_IO_OFFSET(0x4016)	/* D */
 
 /* Interrupt Control Registers */
-#define	HD64461_GPAICR		(CONFIG_HD64461_IOBASE + 0x4020)	/* A */
-#define	HD64461_GPBICR		(CONFIG_HD64461_IOBASE + 0x4022)	/* B */
-#define	HD64461_GPCICR		(CONFIG_HD64461_IOBASE + 0x4024)	/* C */
-#define	HD64461_GPDICR		(CONFIG_HD64461_IOBASE + 0x4026)	/* D */
+#define	HD64461_GPAICR		HD64461_IO_OFFSET(0x4020)	/* A */
+#define	HD64461_GPBICR		HD64461_IO_OFFSET(0x4022)	/* B */
+#define	HD64461_GPCICR		HD64461_IO_OFFSET(0x4024)	/* C */
+#define	HD64461_GPDICR		HD64461_IO_OFFSET(0x4026)	/* D */
 
 /* Interrupt Status Registers */
-#define	HD64461_GPAISR		(CONFIG_HD64461_IOBASE + 0x4040)	/* A */
-#define	HD64461_GPBISR		(CONFIG_HD64461_IOBASE + 0x4042)	/* B */
-#define	HD64461_GPCISR		(CONFIG_HD64461_IOBASE + 0x4044)	/* C */
-#define	HD64461_GPDISR		(CONFIG_HD64461_IOBASE + 0x4046)	/* D */
+#define	HD64461_GPAISR		HD64461_IO_OFFSET(0x4040)	/* A */
+#define	HD64461_GPBISR		HD64461_IO_OFFSET(0x4042)	/* B */
+#define	HD64461_GPCISR		HD64461_IO_OFFSET(0x4044)	/* C */
+#define	HD64461_GPDISR		HD64461_IO_OFFSET(0x4046)	/* D */
 
 /* Interrupt Request Register & Interrupt Mask Register */
-#define	HD64461_NIRR		(CONFIG_HD64461_IOBASE + 0x5000)
-#define	HD64461_NIMR		(CONFIG_HD64461_IOBASE + 0x5002)
+#define	HD64461_NIRR		HD64461_IO_OFFSET(0x5000)
+#define	HD64461_NIMR		HD64461_IO_OFFSET(0x5002)
 
 #define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
 #define	OFFCHIP_IRQ_BASE	64
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 0454f8d6805..25348141674 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -123,10 +123,15 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
 
 __BUILD_MEMORY_STRING(b, u8)
 __BUILD_MEMORY_STRING(w, u16)
-__BUILD_MEMORY_STRING(q, u64)
 
+#ifdef CONFIG_SUPERH32
 void __raw_writesl(void __iomem *addr, const void *data, int longlen);
 void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+#else
+__BUILD_MEMORY_STRING(l, u32)
+#endif
+
+__BUILD_MEMORY_STRING(q, u64)
 
 #define writesb			__raw_writesb
 #define writesw			__raw_writesw
@@ -224,17 +229,6 @@ void __iomem *__ioremap(unsigned long offset, unsigned long size,
 			unsigned long flags);
 void __iounmap(void __iomem *addr);
 
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
-			   const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-#else
-#define __ioremap(offset, size, flags)	((void __iomem *)(offset))
-#define __iounmap(addr)			do { } while (0)
-#define onchip_remap(addr, size, name)	(addr)
-#define onchip_unmap(addr)		do { } while (0)
-#endif /* CONFIG_MMU */
-
 static inline void __iomem *
 __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 {
@@ -268,6 +262,10 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 
 	return __ioremap(offset, size, flags);
 }
+#else
+#define __ioremap_mode(offset, size, flags)	((void __iomem *)(offset))
+#define __iounmap(addr)				do { } while (0)
+#endif /* CONFIG_MMU */
 
 #define ioremap(offset, size)				\
 	__ioremap_mode((offset), (size), 0)
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index d319baaf4fb..a2b8c99cc06 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -8,7 +8,8 @@
  * advised to cap this at the hard limit that they're interested in
  * through the machvec.
  */
-#define NR_IRQS 256
+#define NR_IRQS			256
+#define NR_IRQS_LEGACY		8	/* Legacy external IRQ0-7 */
 
 /*
  * Convert back and forth between INTEVT and IRQ values.
diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
index 613644a758e..036c3311233 100644
--- a/arch/sh/include/asm/kprobes.h
+++ b/arch/sh/include/asm/kprobes.h
@@ -6,7 +6,7 @@
 #include <linux/types.h>
 #include <linux/ptrace.h>
 
-typedef u16 kprobe_opcode_t;
+typedef insn_size_t kprobe_opcode_t;
 #define BREAKPOINT_INSTRUCTION	0xc33a
 
 #define MAX_INSN_SIZE 16
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index 64b1c16a0f0..84dd37761f5 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -46,6 +46,9 @@ struct sh_machine_vector {
 
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
+
+	int (*mv_clk_init)(void);
+	int (*mv_mode_pins)(void);
 };
 
 extern struct sh_machine_vector sh_mv;
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
index 156eb0225cf..7d8b72c91a5 100644
--- a/arch/sh/include/asm/mman.h
+++ b/arch/sh/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_MMAN_H
 #define __ASM_SH_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 9c6d21ec024..49592c780a6 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -163,7 +163,7 @@ typedef struct page *pgtable_t;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 /* vDSO support */
 #ifdef CONFIG_VSYSCALL
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index df1d383e18a..ae0da6f48b6 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -17,54 +17,29 @@
  * external) PCI controllers.
  */
 struct pci_channel {
-	struct pci_ops *pci_ops;
-	struct resource *io_resource;
-	struct resource *mem_resource;
-	int first_devfn;
-	int last_devfn;
-};
+	struct pci_channel	*next;
 
-/*
- * Each board initializes this array and terminates it with a NULL entry.
- */
-extern struct pci_channel board_pci_channels[];
+	struct pci_ops		*pci_ops;
+	struct resource		*io_resource;
+	struct resource		*mem_resource;
 
-#define PCIBIOS_MIN_IO		board_pci_channels->io_resource->start
-#define PCIBIOS_MIN_MEM		board_pci_channels->mem_resource->start
+	unsigned long		io_offset;
+	unsigned long		mem_offset;
 
-/*
- * I/O routine helpers
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define PCI_IO_AREA		0xFE400000
-#define PCI_IO_SIZE		0x00400000
-#elif defined(CONFIG_CPU_SH5)
-extern unsigned long PCI_IO_AREA;
-#define PCI_IO_SIZE		0x00010000
-#else
-#define PCI_IO_AREA		0xFE240000
-#define PCI_IO_SIZE		0x00040000
-#endif
+	unsigned long		reg_base;
 
-#define PCI_MEM_SIZE		0x01000000
+	unsigned long		io_map_base;
+};
 
-#define SH4_PCIIOBR_MASK	0xFFFC0000
-#define pci_ioaddr(addr)	(PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
+extern void register_pci_controller(struct pci_channel *hose);
 
-#if defined(CONFIG_PCI)
-#define is_pci_ioaddr(port)		\
-	(((port) >= PCIBIOS_MIN_IO) &&	\
-	 ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
-#define is_pci_memaddr(port)		\
-	(((port) >= PCIBIOS_MIN_MEM) &&	\
-	 ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
-#else
-#define is_pci_ioaddr(port)	(0)
-#define is_pci_memaddr(port)	(0)
-#endif
+extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
 
 struct pci_dev;
 
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+	enum pci_mmap_state mmap_state, int write_combine);
 extern void pcibios_set_master(struct pci_dev *dev);
 
 static inline void pcibios_penalize_isa_irq(int irq, int active)
@@ -114,31 +89,76 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 #endif
 
 #ifdef CONFIG_PCI
+/*
+ * None of the SH PCI controllers support MWI, it is always treated as a
+ * direct memory write.
+ */
+#define PCI_DISABLE_MWI
+
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
 {
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+
+	if (byte == 0)
+		cacheline_size = L1_CACHE_BYTES;
+	else
+		cacheline_size = byte << 2;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
 }
 #endif
 
+#ifdef CONFIG_SUPERH32
+/*
+ * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped
+ * at the end of the address space in a special non-translatable area.
+ */
+#define PCI_MEM_FIXED_START	0xfd000000
+#define PCI_MEM_FIXED_END	(PCI_MEM_FIXED_START + 0x01000000)
+
+#define is_pci_memory_fixed_range(s, e)	\
+	((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END)
+#else
+#define is_pci_memory_fixed_range(s, e)	(0)
+#endif
+
 /* Board-specific fixup routines. */
-void pcibios_fixup(void);
-int pcibios_init_platform(void);
 int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
-#ifdef CONFIG_PCI_AUTO
-int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+	struct pci_bus_region *region, struct resource *res);
 
-#endif /* __KERNEL__ */
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+				    struct pci_bus_region *region);
 
-/* generic pci stuff */
-#include <asm-generic/pci.h>
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+/* Chances are this interrupt is wired PC-style ...  */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
 
 /* generic DMA-mapping stuff */
 #include <asm-generic/pci-dma-compat.h>
 
+#endif /* __KERNEL__ */
 #endif /* __ASM_SH_PCI_H */
 
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index b517ae08b9c..2a011b18090 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -154,6 +154,10 @@ extern void kmap_coherent_init(void);
 #define kmap_coherent_init()	do { } while (0)
 #endif
 
+/* arch/sh/mm/mmap.c */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
 #include <asm-generic/pgtable.h>
 
 #endif /* __ASM_SH_PGTABLE_H */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 1fd58b42143..ff7daaf9a62 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -32,7 +32,7 @@ enum cpu_type {
 
 	/* SH-4A types */
 	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
-	CPU_SH7723, CPU_SHX3,
+	CPU_SH7723, CPU_SH7724, CPU_SHX3,
 
 	/* SH4AL-DSP types */
 	CPU_SH7343, CPU_SH7722, CPU_SH7366,
@@ -94,6 +94,27 @@ extern struct pt_regs fake_swapper_regs;
 const char *get_cpu_subtype(struct sh_cpuinfo *c);
 extern const struct seq_operations cpuinfo_op;
 
+/* processor boot mode configuration */
+#define MODE_PIN0 (1 << 0)
+#define MODE_PIN1 (1 << 1)
+#define MODE_PIN2 (1 << 2)
+#define MODE_PIN3 (1 << 3)
+#define MODE_PIN4 (1 << 4)
+#define MODE_PIN5 (1 << 5)
+#define MODE_PIN6 (1 << 6)
+#define MODE_PIN7 (1 << 7)
+#define MODE_PIN8 (1 << 8)
+#define MODE_PIN9 (1 << 9)
+#define MODE_PIN10 (1 << 10)
+#define MODE_PIN11 (1 << 11)
+#define MODE_PIN12 (1 << 12)
+#define MODE_PIN13 (1 << 13)
+#define MODE_PIN14 (1 << 14)
+#define MODE_PIN15 (1 << 15)
+
+int generic_mode_pins(void);
+int test_mode_pin(int pin);
+
 #ifdef CONFIG_VSYSCALL
 int vsyscall_init(void);
 #else
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index 68e20ff9aa9..1dc12cb44a2 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -102,6 +102,11 @@ struct pt_dspregs {
 #define	PTRACE_GETDSPREGS	55	/* DSP registers */
 #define	PTRACE_SETDSPREGS	56
 
+#define PT_TEXT_END_ADDR 	240
+#define PT_TEXT_ADDR 		244	/* &(struct user)->start_code */
+#define PT_DATA_ADDR 		248	/* &(struct user)->start_data */
+#define PT_TEXT_LEN		252
+
 #ifdef __KERNEL__
 #include <asm/addrspace.h>
 
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
index f7b010d48af..52b0c2dba97 100644
--- a/arch/sh/include/asm/rtc.h
+++ b/arch/sh/include/asm/rtc.h
@@ -6,6 +6,17 @@ extern void (*board_time_init)(void);
 extern void (*rtc_sh_get_time)(struct timespec *);
 extern int (*rtc_sh_set_time)(const time_t);
 
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+struct rtc_time;
+unsigned int get_rtc_time(struct rtc_time *);
+int set_rtc_time(struct rtc_time *);
+
 #define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
 
 struct sh_rtc_platform_info {
diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h
index 5c5c1e85208..9cc5f014468 100644
--- a/arch/sh/include/asm/signal.h
+++ b/arch/sh/include/asm/signal.h
@@ -106,7 +106,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifdef __KERNEL__
 struct old_sigaction {
diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h
index 60283565f89..a28c9f0053f 100644
--- a/arch/sh/include/asm/spinlock.h
+++ b/arch/sh/include/asm/spinlock.h
@@ -26,7 +26,7 @@
 #define __raw_spin_is_locked(x)		((x)->lock <= 0)
 #define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
 #define __raw_spin_unlock_wait(x) \
-	do { cpu_relax(); } while ((x)->lock)
+	do { while (__raw_spin_is_locked(x)) cpu_relax(); } while (0)
 
 /*
  * Simple spin lock operations.  There are two variants, one clears IRQ's
diff --git a/arch/sh/include/asm/swab.h b/arch/sh/include/asm/swab.h
index e6931593510..0e08fe54ad7 100644
--- a/arch/sh/include/asm/swab.h
+++ b/arch/sh/include/asm/swab.h
@@ -14,15 +14,15 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__asm__(
 #ifdef __SH5__
-		"byterev	%0, %0\n\t"
+		"byterev	%1, %0\n\t"
 		"shari		%0, 32, %0"
 #else
-		"swap.b		%0, %0\n\t"
+		"swap.b		%1, %0\n\t"
 		"swap.w		%0, %0\n\t"
 		"swap.b		%0, %0"
 #endif
 		: "=r" (x)
-		: "0" (x));
+		: "r" (x));
 
 	return x;
 }
@@ -32,13 +32,13 @@ static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
 	__asm__(
 #ifdef __SH5__
-		"byterev	%0, %0\n\t"
+		"byterev	%1, %0\n\t"
 		"shari		%0, 32, %0"
 #else
-		"swap.b		%0, %0"
+		"swap.b		%1, %0"
 #endif
 		: "=r" (x)
-		:  "0" (x));
+		:  "r" (x));
 
 	return x;
 }
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 240b31e1142..6c68a51f1cc 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -198,7 +198,7 @@ do {							\
 })
 #endif
 
-int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
+int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 			    struct mem_access *ma);
 
 asmlinkage void do_address_error(struct pt_regs *regs,
diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h
deleted file mode 100644
index 4c3b66e30af..00000000000
--- a/arch/sh/include/asm/timer.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __ASM_SH_TIMER_H
-#define __ASM_SH_TIMER_H
-
-#include <linux/sysdev.h>
-#include <linux/clocksource.h>
-#include <cpu/timer.h>
-
-struct sys_timer_ops {
-	int (*init)(void);
-	int (*start)(void);
-	int (*stop)(void);
-#ifndef CONFIG_GENERIC_TIME
-	unsigned long (*get_offset)(void);
-#endif
-};
-
-struct sys_timer {
-	const char		*name;
-
-	struct sys_device	dev;
-	struct sys_timer_ops	*ops;
-};
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
-extern struct sys_timer *sys_timer;
-
-#ifndef CONFIG_GENERIC_TIME
-static inline unsigned long get_timer_offset(void)
-{
-	return sys_timer->ops->get_offset();
-}
-#endif
-
-/* arch/sh/kernel/timers/timer.c */
-struct sys_timer *get_sys_timer(void);
-
-/* arch/sh/kernel/time.c */
-void handle_timer_tick(void);
-
-extern struct clocksource clocksource_sh;
-
-#endif /* __ASM_SH_TIMER_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index beea4e6f8df..b13caca62a7 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -23,9 +23,9 @@ typedef unsigned short umode_t;
 typedef u32 dma_addr_t;
 
 #ifdef CONFIG_SUPERH32
-typedef u16 opcode_t;
+typedef u16 insn_size_t;
 #else
-typedef u32 opcode_t;
+typedef u32 insn_size_t;
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
index a7b9028bbfb..4ca4b771737 100644
--- a/arch/sh/include/asm/ubc.h
+++ b/arch/sh/include/asm/ubc.h
@@ -42,12 +42,23 @@
 
 #define BRCR_CMFA		(1 << 15)
 #define BRCR_CMFB		(1 << 14)
+
+#if defined CONFIG_CPU_SH2A
+#define BRCR_CMFCA		(1 << 15)
+#define BRCR_CMFCB		(1 << 14)
+#define BRCR_CMFDA		(1 << 13)
+#define BRCR_CMFDB		(1 << 12)
+#define BRCR_PCBB		(1 << 6)	/* 1: after execution */
+#define BRCR_PCBA		(1 << 5)	/* 1: after execution */
+#define BRCR_PCTE		0
+#else
 #define BRCR_PCTE		(1 << 11)
 #define BRCR_PCBA		(1 << 10)	/* 1: after execution */
 #define BRCR_DBEB		(1 << 7)
 #define BRCR_PCBB		(1 << 6)
 #define BRCR_SEQ		(1 << 3)
 #define BRCR_UBDE		(1 << 0)
+#endif
 
 #ifndef __ASSEMBLY__
 /* arch/sh/kernel/cpu/ubc.S */
diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index d8f89770275..9f4dd252c98 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -3,9 +3,9 @@
 
 /*
  * SH-4A has support for unaligned 32-bit loads, and 32-bit loads only.
- * Support for 16 and 64-bit accesses are done through shifting and
- * masking relative to the endianness. Unaligned stores are not supported
- * by the instruction encoding, so these continue to use the packed
+ * Support for 64-bit accesses are done through shifting and masking
+ * relative to the endianness. Unaligned stores are not supported by the
+ * instruction encoding, so these continue to use the packed
  * struct.
  *
  * The same note as with the movli.l/movco.l pair applies here, as long
@@ -41,9 +41,9 @@ struct __una_u64 { u64 x __attribute__((packed)); };
 static inline u16 __get_unaligned_cpu16(const u8 *p)
 {
 #ifdef __LITTLE_ENDIAN
-	return __get_unaligned_cpu32(p) & 0xffff;
+	return p[0] | p[1] << 8;
 #else
-	return __get_unaligned_cpu32(p) >> 16;
+	return p[0] << 8 | p[1];
 #endif
 }
 
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 2efb819e2db..65197086a1c 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -343,8 +343,9 @@
 #define __NR_inotify_init1	332
 #define __NR_preadv		333
 #define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
 
-#define NR_syscalls 335
+#define NR_syscalls 336
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 6eb9d2934c0..8014aea88ec 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -383,10 +383,11 @@
 #define __NR_inotify_init1	360
 #define __NR_preadv		361
 #define __NR_pwritev		362
+#define __NR_rt_tgsigqueueinfo	363
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 363
+#define NR_syscalls 364
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
index 8ce2fc1cf62..1192e1c761a 100644
--- a/arch/sh/include/cpu-sh2a/cpu/ubc.h
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -1 +1,28 @@
-#include <cpu-sh2/cpu/ubc.h>
+/*
+ * SH-2A UBC definitions
+ *
+ * Copyright (C) 2008 Kieran Bingham
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_CPU_SH2A_UBC_H
+#define __ASM_CPU_SH2A_UBC_H
+
+#define UBC_BARA                0xfffc0400
+#define UBC_BAMRA               0xfffc0404
+#define UBC_BBRA                0xfffc04a0	/* 16 bit access */
+#define UBC_BDRA                0xfffc0408
+#define UBC_BDMRA               0xfffc040c
+
+#define UBC_BARB                0xfffc0410
+#define UBC_BAMRB               0xfffc0414
+#define UBC_BBRB                0xfffc04b0	/* 16 bit access */
+#define UBC_BDRB                0xfffc0418
+#define UBC_BDMRB               0xfffc041c
+
+#define UBC_BRCR                0xfffc04c0
+
+#endif /* __ASM_CPU_SH2A_UBC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
deleted file mode 100644
index 793acf12aa0..00000000000
--- a/arch/sh/include/cpu-sh3/cpu/timer.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/timer.h
- *
- * Copyright (C) 2004 Lineo Solutions, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_TIMER_H
-#define __ASM_CPU_SH3_TIMER_H
-
-/*
- * ---------------------------------------------------------------------------
- * TMU Common definitions for SH3 processors
- *	SH7706
- *	SH7709S
- *	SH7727
- *	SH7729R
- *	SH7710
- *	SH7720
- *	SH7710
- * ---------------------------------------------------------------------------
- */
-
-#if  !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU_TOCR	0xfffffe90	/* Byte access */
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU_012_TSTR	0xa412fe92	/* Byte access */
-
-#define TMU0_TCOR	0xa412fe94	/* Long access */
-#define TMU0_TCNT	0xa412fe98	/* Long access */
-#define TMU0_TCR	0xa412fe9c	/* Word access */
-
-#define TMU1_TCOR	0xa412fea0	/* Long access */
-#define TMU1_TCNT	0xa412fea4	/* Long access */
-#define TMU1_TCR	0xa412fea8	/* Word access */
-
-#define TMU2_TCOR	0xa412feac	/* Long access */
-#define TMU2_TCNT	0xa412feb0	/* Long access */
-#define TMU2_TCR	0xa412feb4	/* Word access */
-
-#else
-#define TMU_012_TSTR	0xfffffe92	/* Byte access */
-
-#define TMU0_TCOR	0xfffffe94	/* Long access */
-#define TMU0_TCNT	0xfffffe98	/* Long access */
-#define TMU0_TCR	0xfffffe9c	/* Word access */
-
-#define TMU1_TCOR	0xfffffea0	/* Long access */
-#define TMU1_TCNT	0xfffffea4	/* Long access */
-#define TMU1_TCR	0xfffffea8	/* Word access */
-
-#define TMU2_TCOR	0xfffffeac	/* Long access */
-#define TMU2_TCNT	0xfffffeb0	/* Long access */
-#define TMU2_TCR	0xfffffeb4	/* Word access */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU2_TCPR2	0xfffffeb8	/* Long access */
-#endif
-#endif
-
-#endif /* __ASM_CPU_SH3_TIMER_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
index 1c61ebf5c8e..7bfb9e8b069 100644
--- a/arch/sh/include/cpu-sh4/cpu/cache.h
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
@@ -38,5 +38,7 @@
 #define CACHE_IC_ADDRESS_ARRAY	0xf0000000
 #define CACHE_OC_ADDRESS_ARRAY	0xf4000000
 
+#define RAMCR			0xFF000074
+
 #endif /* __ASM_CPU_SH4_CACHE_H */
 
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index 749d1c43433..ccf1d999db6 100644
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -25,6 +25,24 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define FRQCRA			0xa4150000
+#define FRQCRB			0xa4150004
+#define VCLKCR			0xa4150048
+
+#define FCLKACR			0xa4150008
+#define FCLKBCR			0xa415000c
+#define FRQCR			FRQCRA
+#define SCLKACR			FCLKACR
+#define SCLKBCR			FCLKBCR
+#define FCLKACR			0xa4150008
+#define FCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150018
+
+#define MSTPCR0			0xa4150030
+#define MSTPCR1			0xa4150034
+#define MSTPCR2			0xa4150038
+
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define FRQCR0			0xffc80000
 #define FRQCR1			0xffc80004
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
index 4b3096f5307..738ea43c503 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -1,6 +1,20 @@
 #ifndef __ASM_SH7722_H__
 #define __ASM_SH7722_H__
 
+/* Boot Mode Pins:
+ *
+ * MD0: CPG - Clock Mode 0->3
+ * MD1: CPG - Clock Mode 0->3
+ * MD2: CPG - Reserved (L: Normal operation)
+ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
+ * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
+ * MD8: Test Mode
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
 enum {
 	/* PTA */
 	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
index 9d2f6d7aa93..14c8ca93678 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7723.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7723.h
@@ -1,6 +1,20 @@
 #ifndef __ASM_SH7723_H__
 #define __ASM_SH7723_H__
 
+/* Boot Mode Pins:
+ *
+ * MD0: CPG - Clock Mode 0->3
+ * MD1: CPG - Clock Mode 0->3
+ * MD2: CPG - Reserved (L: Normal operation)
+ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
+ * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
+ * MD8: Test Mode
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
 enum {
 	/* PTA */
 	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
new file mode 100644
index 00000000000..66fd1184359
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -0,0 +1,269 @@
+#ifndef __ASM_SH7724_H__
+#define __ASM_SH7724_H__
+
+/* Boot Mode Pins:
+ *
+ * MD0: CPG - Clock Mode 0->7
+ * MD1: CPG - Clock Mode 0->7
+ * MD2: CPG - Clock Mode 0->7
+ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
+ * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
+ * MD8: Test Mode
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+	GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+	GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+			      GPIO_PTG5, GPIO_PTG4,
+	GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
+	GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+	GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTQ */
+	GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+		   GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+	GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+	GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
+	GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
+	GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+	GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+	GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+	GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+	GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+	GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+	/* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+	GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9,  GPIO_FN_D8,
+	GPIO_FN_D7,  GPIO_FN_D6,  GPIO_FN_D5,  GPIO_FN_D4,
+	GPIO_FN_D3,  GPIO_FN_D2,  GPIO_FN_D1,  GPIO_FN_D0,
+	GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+	GPIO_FN_CS6B_CE1B,  GPIO_FN_CS6A_CE2B,
+	GPIO_FN_CS5B_CE1A,  GPIO_FN_CS5A_CE2A,
+	GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
+	GPIO_FN_IOIS16,     GPIO_FN_WAIT,
+	GPIO_FN_BS,
+
+	/* KEYSC (PTA/PTB)*/
+	GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
+	GPIO_FN_KEYIN3,  GPIO_FN_KEYIN2,  GPIO_FN_KEYIN1,  GPIO_FN_KEYIN0,
+	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
+
+	/* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
+	GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
+	GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9,  GPIO_FN_IDED8,
+	GPIO_FN_IDED7,  GPIO_FN_IDED6,  GPIO_FN_IDED5,  GPIO_FN_IDED4,
+	GPIO_FN_IDED3,  GPIO_FN_IDED2,  GPIO_FN_IDED1,  GPIO_FN_IDED0,
+	GPIO_FN_IDEA2,     GPIO_FN_IDEA1,     GPIO_FN_IDEA0,  GPIO_FN_IDEIOWR,
+	GPIO_FN_IODREQ,    GPIO_FN_IDECS0,    GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
+	GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
+	GPIO_FN_IDEINT,    GPIO_FN_IDEIORDY,
+
+	/* TPU (PTB/PTR/PTS) */
+	GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
+	GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
+
+	/* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
+	GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+	GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+	GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+	GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9,  GPIO_FN_LCDD8,
+	GPIO_FN_LCDD7,  GPIO_FN_LCDD6,  GPIO_FN_LCDD5,  GPIO_FN_LCDD4,
+	GPIO_FN_LCDD3,  GPIO_FN_LCDD2,  GPIO_FN_LCDD1,  GPIO_FN_LCDD0,
+	GPIO_FN_LCDVSYN,  GPIO_FN_LCDDISP,  GPIO_FN_LCDRS,  GPIO_FN_LCDHSYN,
+	GPIO_FN_LCDCS,    GPIO_FN_LCDDON,   GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
+	GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD,  GPIO_FN_LCDLCLK,
+
+	/* SCIF0 (PTF/PTM) */
+	GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
+
+	/* SCIF1 (PTL) */
+	GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
+
+	/* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
+	GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
+	GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
+
+	/* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
+	GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
+	GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
+	GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
+	GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
+
+	/* SCIF4 (PTE) */
+	GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
+
+	/* SCIF5 (PTS) */
+	GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
+
+	/* FSI (PTE/PTU/PTV) */
+	GPIO_FN_FSIMCKB,   GPIO_FN_FSIMCKA,    GPIO_FN_FSIOASD,
+	GPIO_FN_FSIIABCK,  GPIO_FN_FSIIALRCK,  GPIO_FN_FSIOABCK,
+	GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
+	GPIO_FN_FSIOBSD,   GPIO_FN_FSIIBBCK,   GPIO_FN_FSIIBLRCK,
+	GPIO_FN_FSIOBBCK,  GPIO_FN_FSIOBLRCK,  GPIO_FN_CLKAUDIOBO,
+	GPIO_FN_FSIIASD,
+
+	/* AUD (PTG) */
+	GPIO_FN_AUDCK,   GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
+	GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+
+	/* VIO (PTS) (common?) */
+	GPIO_FN_VIO_CKO,
+
+	/* VIO0 (PTH/PTK) */
+	GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
+	GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9,  GPIO_FN_VIO0_D8,
+	GPIO_FN_VIO0_D7,  GPIO_FN_VIO0_D6,  GPIO_FN_VIO0_D5,  GPIO_FN_VIO0_D4,
+	GPIO_FN_VIO0_D3,  GPIO_FN_VIO0_D2,  GPIO_FN_VIO0_D1,  GPIO_FN_VIO0_D0,
+	GPIO_FN_VIO0_VD,  GPIO_FN_VIO0_CLK,
+	GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
+
+	/* VIO1 (PTK/PTS) */
+	GPIO_FN_VIO1_D7,  GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
+	GPIO_FN_VIO1_D3,  GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
+	GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
+
+	/* Eth  (PTL/PTN/PTX) */
+	GPIO_FN_RMII_RXD0,    GPIO_FN_RMII_RXD1,
+	GPIO_FN_RMII_TXD0,    GPIO_FN_RMII_TXD1,
+	GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
+	GPIO_FN_RMII_RX_ER,   GPIO_FN_RMII_CRS_DV,
+	GPIO_FN_LNKSTA,       GPIO_FN_MDIO,
+	GPIO_FN_MDC,
+
+	/* System (PTJ) */
+	GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
+
+	/* VOU (PTL/PTM/PTN*/
+	GPIO_FN_DV_D15,  GPIO_FN_DV_D14, GPIO_FN_DV_D13,   GPIO_FN_DV_D12,
+	GPIO_FN_DV_D11,  GPIO_FN_DV_D10, GPIO_FN_DV_D9,    GPIO_FN_DV_D8,
+	GPIO_FN_DV_D7,   GPIO_FN_DV_D6,  GPIO_FN_DV_D5,    GPIO_FN_DV_D4,
+	GPIO_FN_DV_D3,   GPIO_FN_DV_D2,  GPIO_FN_DV_D1,    GPIO_FN_DV_D0,
+	GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+
+	/* MSIOF0 (PTL/PTM) */
+	GPIO_FN_MSIOF0_RXD,   GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_MSIOF0_MCK,   GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_MSIOF0_SS1,   GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_MSIOF0_RSYNC,
+
+	/* MSIOF1 (PTV) */
+	GPIO_FN_MSIOF1_RXD,   GPIO_FN_MSIOF1_TXD,
+	GPIO_FN_MSIOF1_MCK,   GPIO_FN_MSIOF1_TSCK,
+	GPIO_FN_MSIOF1_SS1,   GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
+	GPIO_FN_MSIOF1_RSYNC,
+
+	/* DMAC (PTU/PTX) */
+	GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
+	GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
+
+	/* SDHI0 (PTY) */
+	GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
+	GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1,  GPIO_FN_SDHI0D0,
+
+	/* SDHI1 (PTW) */
+	GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
+	GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1,  GPIO_FN_SDHI1D0,
+
+	/* MMC (PTW/PTX)*/
+	GPIO_FN_MMC_D7,  GPIO_FN_MMC_D6,  GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
+	GPIO_FN_MMC_D3,  GPIO_FN_MMC_D2,  GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
+	GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
+
+	/* IrDA (PTX) */
+	GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
+
+	/* TSIF (PTX) */
+	GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
+	GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
+
+	/* IRQ (PTZ) */
+	GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
+	GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
+	GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
+};
+
+#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h
index e4006afb735..9dc9d91e0a8 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7785.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7785.h
@@ -1,6 +1,31 @@
 #ifndef __ASM_SH7785_H__
 #define __ASM_SH7785_H__
 
+/* Boot Mode Pins:
+ *
+ * MODE0: CPG - Initial Pck/Bck Frequency [FRQMR1]
+ * MODE1: CPG - Initial Uck/SHck/DDRck Frequency [FRQMR1]
+ * MODE2: CPG - Reserved (L: Normal operation)
+ * MODE3: CPG - Reserved (L: Normal operation)
+ * MODE4: CPG - Initial PLL setting (72x/36x)
+ * MODE5: LBSC - Area0 Memory Type / Bus Width [CS0BCR.8]
+ * MODE6: LBSC - Area0 Memory Type / Bus Width [CS0BCR.9]
+ * MODE7: LBSC - Area0 Memory Type / Bus Width [CS0BCR.3]
+ * MODE8: LBSC - Endian Mode (L: Big, H: Little) [BCR.31]
+ * MODE9: LBSC - Master/Slave Mode (L: Slave) [BCR.30]
+ * MODE10: CPG - Clock Input (L: Ext Clk, H: Crystal)
+ * MODE11: PCI - Pin Mode (LL: PCI host, LH: PCI slave)
+ * MODE12: PCI - Pin Mode (HL: Local bus, HH: DU)
+ * MODE13: Boot Address Mode (L: 29-bit, H: 32-bit)
+ * MODE14: Reserved (H: Normal operation)
+ *
+ * More information in sh7785 manual Rev.1.00, page 1628.
+ */
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
 enum {
 	/* PA */
 	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
deleted file mode 100644
index d1e796b9688..00000000000
--- a/arch/sh/include/cpu-sh4/cpu/timer.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/timer.h
- *
- * Copyright (C) 2004 Lineo Solutions, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_TIMER_H
-#define __ASM_CPU_SH4_TIMER_H
-
-/*
- * ---------------------------------------------------------------------------
- * TMU Common definitions for SH4 processors
- *	SH7750S/SH7750R
- *	SH7751/SH7751R
- *	SH7760
- *	SH-X3
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
-#define TMU_012_BASE	0xffc10000
-#define TMU_345_BASE	0xffc20000
-#else
-#define TMU_012_BASE	0xffd80000
-#define TMU_345_BASE	0xfe100000
-#endif
-
-#define TMU_TOCR	TMU_012_BASE	/* Not supported on all CPUs */
-
-#define TMU_012_TSTR	(TMU_012_BASE + 0x04)
-#define TMU_345_TSTR	(TMU_345_BASE + 0x04)
-
-#define TMU0_TCOR	(TMU_012_BASE + 0x08)
-#define TMU0_TCNT	(TMU_012_BASE + 0x0c)
-#define TMU0_TCR	(TMU_012_BASE + 0x10)
-
-#define TMU1_TCOR       (TMU_012_BASE + 0x14)
-#define TMU1_TCNT       (TMU_012_BASE + 0x18)
-#define TMU1_TCR        (TMU_012_BASE + 0x1c)
-
-#define TMU2_TCOR       (TMU_012_BASE + 0x20)
-#define TMU2_TCNT       (TMU_012_BASE + 0x24)
-#define TMU2_TCR	(TMU_012_BASE + 0x28)
-#define TMU2_TCPR	(TMU_012_BASE + 0x2c)
-
-#define TMU3_TCOR	(TMU_345_BASE + 0x08)
-#define TMU3_TCNT	(TMU_345_BASE + 0x0c)
-#define TMU3_TCR	(TMU_345_BASE + 0x10)
-
-#define TMU4_TCOR	(TMU_345_BASE + 0x14)
-#define TMU4_TCNT	(TMU_345_BASE + 0x18)
-#define TMU4_TCR	(TMU_345_BASE + 0x1c)
-
-#define TMU5_TCOR	(TMU_345_BASE + 0x20)
-#define TMU5_TCNT	(TMU_345_BASE + 0x24)
-#define TMU5_TCR	(TMU_345_BASE + 0x28)
-
-#endif /* __ASM_CPU_SH4_TIMER_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
index f0f0756e6e8..0ccf257a72d 100644
--- a/arch/sh/include/cpu-sh5/cpu/irq.h
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
@@ -111,7 +111,6 @@
 #define TOP_PRIORITY	15
 
 extern int intc_evt_to_irq[(0xE20/0x20)+1];
-int intc_irq_describe(char* p, int irq);
 extern int platform_int_priority[NR_INTC_IRQS];
 
 #endif /* __ASM_SH_CPU_SH5_IRQ_H */
diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
index 1ce27d5c749..90011d435f3 100644
--- a/arch/sh/include/mach-common/mach/sh7785lcr.h
+++ b/arch/sh/include/mach-common/mach/sh7785lcr.h
@@ -9,11 +9,11 @@
  * -----------------------------+---------------+---------------
  * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
  * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
- * 0x06000000 - 0x07ffffff(CS1)	| reserved	| I2C
+ * 0x06000000 - 0x07ffffff(CS1)	| I2C		| I2C
  * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
  * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
  * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
- * 0x14000000 - 0x17ffffff(CS5)	| I2C		| USB
+ * 0x14000000 - 0x17ffffff(CS5)	| reserved	| USB
  * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
  * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
  *
@@ -32,6 +32,9 @@
 #define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
 #define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
 
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#define PCA9564_SIZE		0x00000100
+
 #define SM107_MEM_ADDR		0x10000000
 #define SM107_MEM_SIZE		0x00e00000
 #define SM107_REG_ADDR		0x13e00000
@@ -40,16 +43,13 @@
 #if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
 #define R8A66597_ADDR		0x14000000	/* USB */
 #define CG200_ADDR		0x18000000	/* SD */
-#define PCA9564_ADDR		0x06000000	/* I2C */
 #else
 #define R8A66597_ADDR		0x08000000
 #define CG200_ADDR		0x0c000000
-#define PCA9564_ADDR		0x14000000
 #endif
 
 #define R8A66597_SIZE		0x00000100
 #define CG200_SIZE		0x00010000
-#define PCA9564_SIZE		0x00000100
 
 #endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
 
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
index 75fc9009e09..0314d975e62 100644
--- a/arch/sh/include/mach-dreamcast/mach/pci.h
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -21,5 +21,7 @@
 
 #define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
 
+extern struct pci_ops gapspci_pci_ops;
+
 #endif /* __ASM_SH_DREAMCAST_PCI_H */
 
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
new file mode 100644
index 00000000000..74164b60d0d
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -0,0 +1,67 @@
+#ifndef __ASM_SH_SE7724_H
+#define __ASM_SH_SE7724_H
+
+/*
+ * linux/include/asm-sh/se7724.h
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * Based on se7722.h
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+#define PA_LED		(0xba203000)	/* 8bit LED */
+#define IRQ_MODE	(0xba200010)
+#define IRQ0_SR		(0xba200014)
+#define IRQ1_SR		(0xba200018)
+#define IRQ2_SR		(0xba20001c)
+#define IRQ0_MR		(0xba200020)
+#define IRQ1_MR		(0xba200024)
+#define IRQ2_MR		(0xba200028)
+
+/* IRQ */
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#define IRQ2_IRQ        34
+
+/* Bits in IRQ012 registers */
+#define SE7724_FPGA_IRQ_BASE	220
+
+/* IRQ0 */
+#define IRQ0_BASE	SE7724_FPGA_IRQ_BASE
+#define IRQ0_KEY	(IRQ0_BASE + 12)
+#define IRQ0_RMII	(IRQ0_BASE + 13)
+#define IRQ0_SMC	(IRQ0_BASE + 14)
+#define IRQ0_MASK	0x7fff
+#define IRQ0_END	IRQ0_SMC
+/* IRQ1 */
+#define IRQ1_BASE	(IRQ0_END + 1)
+#define IRQ1_TS		(IRQ1_BASE + 0)
+#define IRQ1_MASK	0x0001
+#define IRQ1_END	IRQ1_TS
+/* IRQ2 */
+#define IRQ2_BASE	(IRQ1_END + 1)
+#define IRQ2_USB0	(IRQ1_BASE + 0)
+#define IRQ2_USB1	(IRQ1_BASE + 1)
+#define IRQ2_MASK	0x0003
+#define IRQ2_END	IRQ2_USB1
+
+#define SE7724_FPGA_IRQ_NR	(IRQ2_END - IRQ0_BASE)
+
+/* arch/sh/boards/se/7724/irq.c */
+void init_se7724_IRQ(void);
+
+#define __IO_PREFIX		se7724
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7724_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 82a3a150c00..9411e3e31e6 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -11,10 +11,10 @@ endif
 
 obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o			\
 	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
-	   sys_sh.o sys_sh32.o syscalls_32.o time_32.o topology.o	\
+	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o	\
 	   traps.o traps_32.o
 
-obj-y				+= cpu/ timers/
+obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
@@ -32,4 +32,6 @@ obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
+
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index fe425d7f687..67b9f6c6326 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -2,19 +2,18 @@ extra-y	:= head_64.o init_task.o vmlinux.lds
 
 obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
 	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
-	   syscalls_64.o time_64.o topology.o traps.o traps_64.o
+	   syscalls_64.o time.o topology.o traps.o traps_64.o
 
-obj-y				+= cpu/ timers/
-obj-$(CONFIG_VSYSCALL)		+= vsyscall/
+obj-y				+= cpu/
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_64.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
+
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 2600641a483..eecad7cbd61 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -17,5 +17,6 @@ obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/
 
 obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
+obj-$(CONFIG_SH_CLK_CPG)	+= clock-cpg.o
 
 obj-y	+= irq/ init.o clock.o
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
new file mode 100644
index 00000000000..275942e58e4
--- /dev/null
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -0,0 +1,256 @@
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+static int sh_clk_mstp32_enable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit),
+		     clk->enable_reg);
+	return 0;
+}
+
+static void sh_clk_mstp32_disable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(clk->enable_reg) | (1 << clk->enable_bit),
+		     clk->enable_reg);
+}
+
+static struct clk_ops sh_clk_mstp32_clk_ops = {
+	.enable		= sh_clk_mstp32_enable,
+	.disable	= sh_clk_mstp32_disable,
+	.recalc		= followparent_recalc,
+};
+
+int __init sh_clk_mstp32_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &sh_clk_mstp32_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
+
+static long sh_clk_div_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_table_round(clk, clk->freq_table, rate);
+}
+
+static int sh_clk_div6_divisors[64] = {
+	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
+	17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
+	33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
+	49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
+};
+
+static struct clk_div_mult_table sh_clk_div6_table = {
+	.divisors = sh_clk_div6_divisors,
+	.nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
+};
+
+static unsigned long sh_clk_div6_recalc(struct clk *clk)
+{
+	struct clk_div_mult_table *table = &sh_clk_div6_table;
+	unsigned int idx;
+
+	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+			     table, NULL);
+
+	idx = __raw_readl(clk->enable_reg) & 0x003f;
+
+	return clk->freq_table[idx].frequency;
+}
+
+static int sh_clk_div6_set_rate(struct clk *clk,
+				unsigned long rate, int algo_id)
+{
+	unsigned long value;
+	int idx;
+
+	idx = clk_rate_table_find(clk, clk->freq_table, rate);
+	if (idx < 0)
+		return idx;
+
+	value = __raw_readl(clk->enable_reg);
+	value &= ~0x3f;
+	value |= idx;
+	__raw_writel(value, clk->enable_reg);
+	return 0;
+}
+
+static int sh_clk_div6_enable(struct clk *clk)
+{
+	unsigned long value;
+	int ret;
+
+	ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
+	if (ret == 0) {
+		value = __raw_readl(clk->enable_reg);
+		value &= ~0x100; /* clear stop bit to enable clock */
+		__raw_writel(value, clk->enable_reg);
+	}
+	return ret;
+}
+
+static void sh_clk_div6_disable(struct clk *clk)
+{
+	unsigned long value;
+
+	value = __raw_readl(clk->enable_reg);
+	value |= 0x100; /* stop clock */
+	value |= 0x3f; /* VDIV bits must be non-zero, overwrite divider */
+	__raw_writel(value, clk->enable_reg);
+}
+
+static struct clk_ops sh_clk_div6_clk_ops = {
+	.recalc		= sh_clk_div6_recalc,
+	.round_rate	= sh_clk_div_round_rate,
+	.set_rate	= sh_clk_div6_set_rate,
+	.enable		= sh_clk_div6_enable,
+	.disable	= sh_clk_div6_disable,
+};
+
+int __init sh_clk_div6_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	void *freq_table;
+	int nr_divs = sh_clk_div6_table.nr_divisors;
+	int freq_table_size = sizeof(struct cpufreq_frequency_table);
+	int ret = 0;
+	int k;
+
+	freq_table_size *= (nr_divs + 1);
+
+	freq_table = alloc_bootmem(freq_table_size * nr);
+	if (!freq_table)
+		return -ENOMEM;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+
+		clkp->ops = &sh_clk_div6_clk_ops;
+		clkp->id = -1;
+		clkp->freq_table = freq_table + (k * freq_table_size);
+		clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
+
+		ret = clk_register(clkp);
+	}
+
+	return ret;
+}
+
+static unsigned long sh_clk_div4_recalc(struct clk *clk)
+{
+	struct clk_div_mult_table *table = clk->priv;
+	unsigned int idx;
+
+	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+			     table, &clk->arch_flags);
+
+	idx = (__raw_readl(clk->enable_reg) >> clk->enable_bit) & 0x000f;
+
+	return clk->freq_table[idx].frequency;
+}
+
+static struct clk_ops sh_clk_div4_clk_ops = {
+	.recalc		= sh_clk_div4_recalc,
+	.round_rate	= sh_clk_div_round_rate,
+};
+
+int __init sh_clk_div4_register(struct clk *clks, int nr,
+				struct clk_div_mult_table *table)
+{
+	struct clk *clkp;
+	void *freq_table;
+	int nr_divs = table->nr_divisors;
+	int freq_table_size = sizeof(struct cpufreq_frequency_table);
+	int ret = 0;
+	int k;
+
+	freq_table_size *= (nr_divs + 1);
+
+	freq_table = alloc_bootmem(freq_table_size * nr);
+	if (!freq_table)
+		return -ENOMEM;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+
+		clkp->ops = &sh_clk_div4_clk_ops;
+		clkp->id = -1;
+		clkp->priv = table;
+
+		clkp->freq_table = freq_table + (k * freq_table_size);
+		clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
+
+		ret = clk_register(clkp);
+	}
+
+	return ret;
+}
+
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
+static struct clk master_clk = {
+	.name		= "master_clk",
+	.flags		= CLK_ENABLE_ON_INIT,
+	.rate		= CONFIG_SH_PCLK_FREQ,
+};
+
+static struct clk peripheral_clk = {
+	.name		= "peripheral_clk",
+	.parent		= &master_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk bus_clk = {
+	.name		= "bus_clk",
+	.parent		= &master_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static struct clk cpu_clk = {
+	.name		= "cpu_clk",
+	.parent		= &master_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+/*
+ * The ordering of these clocks matters, do not change it.
+ */
+static struct clk *onchip_clocks[] = {
+	&master_clk,
+	&peripheral_clk,
+	&bus_clk,
+	&cpu_clk,
+};
+
+int __init __deprecated cpg_clk_init(void)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
+		struct clk *clk = onchip_clocks[i];
+		arch_init_clk_ops(&clk->ops, i);
+		if (clk->ops)
+			ret |= clk_register(clk);
+	}
+
+	return ret;
+}
+
+/*
+ * Placeholder for compatability, until the lazy CPUs do this
+ * on their own.
+ */
+int __init __weak arch_clk_init(void)
+{
+	return cpg_clk_init();
+}
+#endif /* CONFIG_SH_CPG_CLK_LEGACY */
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 1dc896483b5..f3a46be2ae8 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -1,15 +1,19 @@
 /*
  * arch/sh/kernel/cpu/clock.c - SuperH clock framework
  *
- *  Copyright (C) 2005, 2006, 2007  Paul Mundt
+ *  Copyright (C) 2005 - 2009  Paul Mundt
  *
  * This clock framework is derived from the OMAP version by:
  *
- *	Copyright (C) 2004 - 2005 Nokia Corporation
+ *	Copyright (C) 2004 - 2008 Nokia Corporation
  *	Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
  *
+ *  With clkdev bits:
+ *
+ *	Copyright (C) 2008 Russell King.
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -19,134 +23,159 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/list.h>
-#include <linux/kref.h>
 #include <linux/kobject.h>
 #include <linux/sysdev.h>
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
+#include <linux/cpufreq.h>
 #include <asm/clock.h>
-#include <asm/timer.h>
+#include <asm/machvec.h>
 
 static LIST_HEAD(clock_list);
 static DEFINE_SPINLOCK(clock_lock);
 static DEFINE_MUTEX(clock_list_sem);
 
-/*
- * Each subtype is expected to define the init routines for these clocks,
- * as each subtype (or processor family) will have these clocks at the
- * very least. These are all provided through the CPG, which even some of
- * the more quirky parts (such as ST40, SH4-202, etc.) still have.
- *
- * The processor-specific code is expected to register any additional
- * clock sources that are of interest.
- */
-static struct clk master_clk = {
-	.name		= "master_clk",
-	.flags		= CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-	.rate		= CONFIG_SH_PCLK_FREQ,
-};
+void clk_rate_table_build(struct clk *clk,
+			  struct cpufreq_frequency_table *freq_table,
+			  int nr_freqs,
+			  struct clk_div_mult_table *src_table,
+			  unsigned long *bitmap)
+{
+	unsigned long mult, div;
+	unsigned long freq;
+	int i;
 
-static struct clk module_clk = {
-	.name		= "module_clk",
-	.parent		= &master_clk,
-	.flags		= CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-};
+	for (i = 0; i < nr_freqs; i++) {
+		div = 1;
+		mult = 1;
 
-static struct clk bus_clk = {
-	.name		= "bus_clk",
-	.parent		= &master_clk,
-	.flags		= CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-};
+		if (src_table->divisors && i < src_table->nr_divisors)
+			div = src_table->divisors[i];
 
-static struct clk cpu_clk = {
-	.name		= "cpu_clk",
-	.parent		= &master_clk,
-	.flags		= CLK_ALWAYS_ENABLED,
-};
+		if (src_table->multipliers && i < src_table->nr_multipliers)
+			mult = src_table->multipliers[i];
 
-/*
- * The ordering of these clocks matters, do not change it.
- */
-static struct clk *onchip_clocks[] = {
-	&master_clk,
-	&module_clk,
-	&bus_clk,
-	&cpu_clk,
-};
+		if (!div || !mult || (bitmap && !test_bit(i, bitmap)))
+			freq = CPUFREQ_ENTRY_INVALID;
+		else
+			freq = clk->parent->rate * mult / div;
 
-static void propagate_rate(struct clk *clk)
+		freq_table[i].index = i;
+		freq_table[i].frequency = freq;
+	}
+
+	/* Termination entry */
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+}
+
+long clk_rate_table_round(struct clk *clk,
+			  struct cpufreq_frequency_table *freq_table,
+			  unsigned long rate)
 {
-	struct clk *clkp;
+	unsigned long rate_error, rate_error_prev = ~0UL;
+	unsigned long rate_best_fit = rate;
+	unsigned long highest, lowest;
+	int i;
+
+	highest = lowest = 0;
+
+	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		unsigned long freq = freq_table[i].frequency;
 
-	list_for_each_entry(clkp, &clock_list, node) {
-		if (likely(clkp->parent != clk))
+		if (freq == CPUFREQ_ENTRY_INVALID)
 			continue;
-		if (likely(clkp->ops && clkp->ops->recalc))
-			clkp->ops->recalc(clkp);
-		if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
-			propagate_rate(clkp);
+
+		if (freq > highest)
+			highest = freq;
+		if (freq < lowest)
+			lowest = freq;
+
+		rate_error = abs(freq - rate);
+		if (rate_error < rate_error_prev) {
+			rate_best_fit = freq;
+			rate_error_prev = rate_error;
+		}
+
+		if (rate_error == 0)
+			break;
 	}
+
+	if (rate >= highest)
+		rate_best_fit = highest;
+	if (rate <= lowest)
+		rate_best_fit = lowest;
+
+	return rate_best_fit;
 }
 
-static int __clk_enable(struct clk *clk)
+int clk_rate_table_find(struct clk *clk,
+			struct cpufreq_frequency_table *freq_table,
+			unsigned long rate)
 {
-	/*
-	 * See if this is the first time we're enabling the clock, some
-	 * clocks that are always enabled still require "special"
-	 * initialization. This is especially true if the clock mode
-	 * changes and the clock needs to hunt for the proper set of
-	 * divisors to use before it can effectively recalc.
-	 */
-	if (unlikely(atomic_read(&clk->kref.refcount) == 1))
-		if (clk->ops && clk->ops->init)
-			clk->ops->init(clk);
+	int i;
 
-	kref_get(&clk->kref);
+	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		unsigned long freq = freq_table[i].frequency;
 
-	if (clk->flags & CLK_ALWAYS_ENABLED)
-		return 0;
+		if (freq == CPUFREQ_ENTRY_INVALID)
+			continue;
 
-	if (likely(clk->ops && clk->ops->enable))
-		clk->ops->enable(clk);
+		if (freq == rate)
+			return i;
+	}
 
-	return 0;
+	return -ENOENT;
 }
 
-int clk_enable(struct clk *clk)
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
 {
-	unsigned long flags;
-	int ret;
-
-	if (!clk)
-		return -EINVAL;
+	return clk->parent ? clk->parent->rate : 0;
+}
 
-	clk_enable(clk->parent);
+int clk_reparent(struct clk *child, struct clk *parent)
+{
+	list_del_init(&child->sibling);
+	if (parent)
+		list_add(&child->sibling, &parent->children);
+	child->parent = parent;
 
-	spin_lock_irqsave(&clock_lock, flags);
-	ret = __clk_enable(clk);
-	spin_unlock_irqrestore(&clock_lock, flags);
+	/* now do the debugfs renaming to reattach the child
+	   to the proper parent */
 
-	return ret;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_enable);
 
-static void clk_kref_release(struct kref *kref)
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
 {
-	/* Nothing to do */
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &tclk->children, sibling) {
+		if (clkp->ops && clkp->ops->recalc)
+			clkp->rate = clkp->ops->recalc(clkp);
+
+		propagate_rate(clkp);
+	}
 }
 
 static void __clk_disable(struct clk *clk)
 {
-	int count = kref_put(&clk->kref, clk_kref_release);
-
-	if (clk->flags & CLK_ALWAYS_ENABLED)
+	if (clk->usecount == 0) {
+		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
 		return;
+	}
 
-	if (!count) {	/* count reaches zero, disable the clock */
+	if (!(--clk->usecount)) {
 		if (likely(clk->ops && clk->ops->disable))
 			clk->ops->disable(clk);
+		if (likely(clk->parent))
+			__clk_disable(clk->parent);
 	}
 }
 
@@ -160,28 +189,97 @@ void clk_disable(struct clk *clk)
 	spin_lock_irqsave(&clock_lock, flags);
 	__clk_disable(clk);
 	spin_unlock_irqrestore(&clock_lock, flags);
-
-	clk_disable(clk->parent);
 }
 EXPORT_SYMBOL_GPL(clk_disable);
 
+static int __clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->usecount++ == 0) {
+		if (clk->parent) {
+			ret = __clk_enable(clk->parent);
+			if (unlikely(ret))
+				goto err;
+		}
+
+		if (clk->ops && clk->ops->enable) {
+			ret = clk->ops->enable(clk);
+			if (ret) {
+				if (clk->parent)
+					__clk_disable(clk->parent);
+				goto err;
+			}
+		}
+	}
+
+	return ret;
+err:
+	clk->usecount--;
+	return ret;
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	int ret;
+
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = __clk_enable(clk);
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &root_clks, sibling) {
+		if (clkp->ops && clkp->ops->recalc)
+			clkp->rate = clkp->ops->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
 int clk_register(struct clk *clk)
 {
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/*
+	 * trap out already registered clocks
+	 */
+	if (clk->node.next || clk->node.prev)
+		return 0;
+
 	mutex_lock(&clock_list_sem);
 
-	list_add(&clk->node, &clock_list);
-	kref_init(&clk->kref);
+	INIT_LIST_HEAD(&clk->children);
+	clk->usecount = 0;
 
-	mutex_unlock(&clock_list_sem);
+	if (clk->parent)
+		list_add(&clk->sibling, &clk->parent->children);
+	else
+		list_add(&clk->sibling, &root_clks);
 
-	if (clk->flags & CLK_ALWAYS_ENABLED) {
-		pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name);
-		if (clk->ops && clk->ops->init)
-			clk->ops->init(clk);
-		if (clk->ops && clk->ops->enable)
-			clk->ops->enable(clk);
-		pr_debug( "Enabled.");
-	}
+	list_add(&clk->node, &clock_list);
+	if (clk->ops && clk->ops->init)
+		clk->ops->init(clk);
+	mutex_unlock(&clock_list_sem);
 
 	return 0;
 }
@@ -190,11 +288,21 @@ EXPORT_SYMBOL_GPL(clk_register);
 void clk_unregister(struct clk *clk)
 {
 	mutex_lock(&clock_list_sem);
+	list_del(&clk->sibling);
 	list_del(&clk->node);
 	mutex_unlock(&clock_list_sem);
 }
 EXPORT_SYMBOL_GPL(clk_unregister);
 
+static void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clock_list, node)
+		if (clkp->flags & CLK_ENABLE_ON_INIT)
+			clk_enable(clkp);
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
@@ -210,56 +318,59 @@ EXPORT_SYMBOL_GPL(clk_set_rate);
 int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
 {
 	int ret = -EOPNOTSUPP;
+	unsigned long flags;
 
-	if (likely(clk->ops && clk->ops->set_rate)) {
-		unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
 
-		spin_lock_irqsave(&clock_lock, flags);
+	if (likely(clk->ops && clk->ops->set_rate)) {
 		ret = clk->ops->set_rate(clk, rate, algo_id);
-		spin_unlock_irqrestore(&clock_lock, flags);
+		if (ret != 0)
+			goto out_unlock;
+	} else {
+		clk->rate = rate;
+		ret = 0;
 	}
 
-	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
-		propagate_rate(clk);
+	if (clk->ops && clk->ops->recalc)
+		clk->rate = clk->ops->recalc(clk);
 
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+	propagate_rate(clk);
 
-void clk_recalc_rate(struct clk *clk)
-{
-	if (likely(clk->ops && clk->ops->recalc)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&clock_lock, flags);
-		clk->ops->recalc(clk);
-		spin_unlock_irqrestore(&clock_lock, flags);
-	}
+out_unlock:
+	spin_unlock_irqrestore(&clock_lock, flags);
 
-	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
-		propagate_rate(clk);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(clk_recalc_rate);
+EXPORT_SYMBOL_GPL(clk_set_rate_ex);
 
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
+	unsigned long flags;
 	int ret = -EINVAL;
-	struct clk *old;
 
 	if (!parent || !clk)
 		return ret;
+	if (clk->parent == parent)
+		return 0;
 
-	old = clk->parent;
-	if (likely(clk->ops && clk->ops->set_parent)) {
-		unsigned long flags;
-		spin_lock_irqsave(&clock_lock, flags);
-		ret = clk->ops->set_parent(clk, parent);
-		spin_unlock_irqrestore(&clock_lock, flags);
-		clk->parent = (ret ? old : parent);
-	}
+	spin_lock_irqsave(&clock_lock, flags);
+	if (clk->usecount == 0) {
+		if (clk->ops->set_parent)
+			ret = clk->ops->set_parent(clk, parent);
+		else
+			ret = clk_reparent(clk, parent);
+
+		if (ret == 0) {
+			pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+				 clk->name, clk->parent->name, clk->rate);
+			if (clk->ops->recalc)
+				clk->rate = clk->ops->recalc(clk);
+			propagate_rate(clk);
+		}
+	} else
+		ret = -EBUSY;
+	spin_unlock_irqrestore(&clock_lock, flags);
 
-	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
-		propagate_rate(clk);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_set_parent);
@@ -287,14 +398,69 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 EXPORT_SYMBOL_GPL(clk_round_rate);
 
 /*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ *  An entry with a NULL ID is assumed to be a wildcard.
+ *  If an entry has a device ID, it must match
+ *  If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
+static struct clk *clk_find(const char *dev_id, const char *con_id)
+{
+	struct clk_lookup *p;
+	struct clk *clk = NULL;
+	int match, best = 0;
+
+	list_for_each_entry(p, &clock_list, node) {
+		match = 0;
+		if (p->dev_id) {
+			if (!dev_id || strcmp(p->dev_id, dev_id))
+				continue;
+			match += 2;
+		}
+		if (p->con_id) {
+			if (!con_id || strcmp(p->con_id, con_id))
+				continue;
+			match += 1;
+		}
+		if (match == 0)
+			continue;
+
+		if (match > best) {
+			clk = p->clk;
+			best = match;
+		}
+	}
+	return clk;
+}
+
+struct clk *clk_get_sys(const char *dev_id, const char *con_id)
+{
+	struct clk *clk;
+
+	mutex_lock(&clock_list_sem);
+	clk = clk_find(dev_id, con_id);
+	mutex_unlock(&clock_list_sem);
+
+	return clk ? clk : ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL_GPL(clk_get_sys);
+
+/*
  * Returns a clock. Note that we first try to use device id on the bus
  * and clock name. If this fails, we try to use clock name only.
  */
 struct clk *clk_get(struct device *dev, const char *id)
 {
+	const char *dev_id = dev ? dev_name(dev) : NULL;
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 	int idno;
 
+	clk = clk_get_sys(dev_id, id);
+	if (clk && !IS_ERR(clk))
+		return clk;
+
 	if (dev == NULL || dev->bus != &platform_bus_type)
 		idno = -1;
 	else
@@ -330,36 +496,6 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL_GPL(clk_put);
 
-void __init __attribute__ ((weak))
-arch_init_clk_ops(struct clk_ops **ops, int type)
-{
-}
-
-int __init __attribute__ ((weak))
-arch_clk_init(void)
-{
-	return 0;
-}
-
-static int show_clocks(char *buf, char **start, off_t off,
-		       int len, int *eof, void *data)
-{
-	struct clk *clk;
-	char *p = buf;
-
-	list_for_each_entry_reverse(clk, &clock_list, node) {
-		unsigned long rate = clk_get_rate(clk);
-
-		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
-			     rate / 1000000, (rate % 1000000) / 10000,
-			     ((clk->flags & CLK_ALWAYS_ENABLED) ||
-			      (atomic_read(&clk->kref.refcount) != 1)) ?
-			     "enabled" : "disabled");
-	}
-
-	return p - buf;
-}
-
 #ifdef CONFIG_PM
 static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 {
@@ -369,20 +505,22 @@ static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 	switch (state.event) {
 	case PM_EVENT_ON:
 		/* Resumeing from hibernation */
-		if (prev_state.event == PM_EVENT_FREEZE) {
-			list_for_each_entry(clkp, &clock_list, node)
-				if (likely(clkp->ops)) {
-					unsigned long rate = clkp->rate;
-
-					if (likely(clkp->ops->set_parent))
-						clkp->ops->set_parent(clkp,
-							clkp->parent);
-					if (likely(clkp->ops->set_rate))
-						clkp->ops->set_rate(clkp,
-							rate, NO_CHANGE);
-					else if (likely(clkp->ops->recalc))
-						clkp->ops->recalc(clkp);
-					}
+		if (prev_state.event != PM_EVENT_FREEZE)
+			break;
+
+		list_for_each_entry(clkp, &clock_list, node) {
+			if (likely(clkp->ops)) {
+				unsigned long rate = clkp->rate;
+
+				if (likely(clkp->ops->set_parent))
+					clkp->ops->set_parent(clkp,
+						clkp->parent);
+				if (likely(clkp->ops->set_rate))
+					clkp->ops->set_rate(clkp,
+						rate, NO_CHANGE);
+				else if (likely(clkp->ops->recalc))
+					clkp->rate = clkp->ops->recalc(clkp);
+			}
 		}
 		break;
 	case PM_EVENT_FREEZE:
@@ -426,34 +564,116 @@ subsys_initcall(clk_sysdev_init);
 
 int __init clk_init(void)
 {
-	int i, ret = 0;
-
-	BUG_ON(!master_clk.rate);
-
-	for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
-		struct clk *clk = onchip_clocks[i];
+	int ret;
 
-		arch_init_clk_ops(&clk->ops, i);
-		ret |= clk_register(clk);
+	ret = arch_clk_init();
+	if (unlikely(ret)) {
+		pr_err("%s: CPU clock registration failed.\n", __func__);
+		return ret;
 	}
 
-	ret |= arch_clk_init();
+	if (sh_mv.mv_clk_init) {
+		ret = sh_mv.mv_clk_init();
+		if (unlikely(ret)) {
+			pr_err("%s: machvec clock initialization failed.\n",
+			       __func__);
+			return ret;
+		}
+	}
 
 	/* Kick the child clocks.. */
-	propagate_rate(&master_clk);
-	propagate_rate(&bus_clk);
+	recalculate_root_clocks();
+
+	/* Enable the necessary init clocks */
+	clk_enable_init_clocks();
 
 	return ret;
 }
 
-static int __init clk_proc_init(void)
+/*
+ *	debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+
+static int clk_debugfs_register_one(struct clk *c)
 {
-	struct proc_dir_entry *p;
-	p = create_proc_read_entry("clocks", S_IRUSR, NULL,
-				   show_clocks, NULL);
-	if (unlikely(!p))
-		return -EINVAL;
+	int err;
+	struct dentry *d, *child;
+	struct clk *pa = c->parent;
+	char s[255];
+	char *p = s;
+
+	p += sprintf(p, "%s", c->name);
+	if (c->id >= 0)
+		sprintf(p, ":%d", c->id);
+	d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+	c->dentry = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	return 0;
 
+err_out:
+	d = c->dentry;
+	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(c->dentry);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dentry) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dentry) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clock_list, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
 	return 0;
+err_out:
+	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+	return err;
 }
-subsys_initcall(clk_proc_init);
+late_initcall(clk_debugfs_init);
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index d29e69c156f..ad85421099c 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -62,6 +62,11 @@ static void __init speculative_execution_init(void)
 #define speculative_execution_init()	do { } while (0)
 #endif
 
+/* 2nd-level cache init */
+void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
+{
+}
+
 /*
  * Generic first-level cache init
  */
@@ -146,6 +151,8 @@ static void __uses_jump_to_uncached cache_init(void)
 	flags &= ~CCR_CACHE_ENABLE;
 #endif
 
+	l2_cache_init();
+
 	ctrl_outl(flags, CCR);
 	back_to_cached();
 }
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
index 301b505c427..6b5d191eec3 100644
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ b/arch/sh/kernel/cpu/irq/imask.c
@@ -18,38 +18,17 @@
 #include <linux/spinlock.h>
 #include <linux/cache.h>
 #include <linux/irq.h>
+#include <linux/bitmap.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 
 /* Bitmap of IRQ masked */
-static unsigned long imask_mask = 0x7fff;
-static int interrupt_priority = 0;
-
-static void enable_imask_irq(unsigned int irq);
-static void disable_imask_irq(unsigned int irq);
-static void shutdown_imask_irq(unsigned int irq);
-static void mask_and_ack_imask(unsigned int);
-static void end_imask_irq(unsigned int irq);
-
 #define IMASK_PRIORITY	15
 
-static unsigned int startup_imask_irq(unsigned int irq)
-{
-	/* Nothing to do */
-	return 0; /* never anything pending */
-}
+static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY);
+static int interrupt_priority;
 
-static struct hw_interrupt_type imask_irq_type = {
-	.typename = "SR.IMASK",
-	.startup = startup_imask_irq,
-	.shutdown = shutdown_imask_irq,
-	.enable = enable_imask_irq,
-	.disable = disable_imask_irq,
-	.ack = mask_and_ack_imask,
-	.end = end_imask_irq
-};
-
-void static inline set_interrupt_registers(int ip)
+static inline void set_interrupt_registers(int ip)
 {
 	unsigned long __dummy;
 
@@ -72,42 +51,31 @@ void static inline set_interrupt_registers(int ip)
 		     : "t");
 }
 
-static void disable_imask_irq(unsigned int irq)
+static void mask_imask_irq(unsigned int irq)
 {
-	clear_bit(irq, &imask_mask);
+	clear_bit(irq, imask_mask);
 	if (interrupt_priority < IMASK_PRIORITY - irq)
 		interrupt_priority = IMASK_PRIORITY - irq;
-
 	set_interrupt_registers(interrupt_priority);
 }
 
-static void enable_imask_irq(unsigned int irq)
+static void unmask_imask_irq(unsigned int irq)
 {
-	set_bit(irq, &imask_mask);
-	interrupt_priority = IMASK_PRIORITY - ffz(imask_mask);
-
+	set_bit(irq, imask_mask);
+	interrupt_priority = IMASK_PRIORITY -
+		find_first_zero_bit(imask_mask, IMASK_PRIORITY);
 	set_interrupt_registers(interrupt_priority);
 }
 
-static void mask_and_ack_imask(unsigned int irq)
-{
-	disable_imask_irq(irq);
-}
-
-static void end_imask_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_imask_irq(irq);
-}
-
-static void shutdown_imask_irq(unsigned int irq)
-{
-	/* Nothing to do */
-}
+static struct irq_chip imask_irq_chip = {
+	.typename	= "SR.IMASK",
+	.mask		= mask_imask_irq,
+	.unmask		= unmask_imask_irq,
+	.mask_ack	= mask_imask_irq,
+};
 
 void make_imask_irq(unsigned int irq)
 {
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &imask_irq_type;
-	enable_irq(irq);
+	set_irq_chip_and_handler_name(irq, &imask_irq_chip,
+				      handle_level_irq, "level");
 }
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 726f0335da7..6c092f1f555 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -84,7 +84,7 @@ static void disable_intc_irq(unsigned int irq);
 static void mask_and_ack_intc(unsigned int);
 static void end_intc_irq(unsigned int irq);
 
-static struct hw_interrupt_type intc_irq_type = {
+static struct irq_chip intc_irq_type = {
 	.typename = "INTC",
 	.startup = startup_intc_irq,
 	.shutdown = shutdown_intc_irq,
@@ -152,43 +152,13 @@ static void end_intc_irq(unsigned int irq)
 	enable_intc_irq(irq);
 }
 
-/* For future use, if we ever support IRLM=0) */
-void make_intc_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intc_irq_type;
-	disable_intc_irq(irq);
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-static int IRQ_to_vectorN[NR_INTC_IRQS] = {
-	0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /*  0- 7 */
-	  -1,   -1,   -1,   -1, 0x50, 0x51, 0x52, 0x53,	/*  8-15 */
-	0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36,   -1, /* 16-23 */
-	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 24-31 */
-	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38,	/* 32-39 */
-        0x39, 0x3A, 0x3B,   -1,   -1,   -1,   -1,   -1, /* 40-47 */
-	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 48-55 */
-	  -1,   -1,   -1,   -1,   -1,   -1,   -1, 0x2B, /* 56-63 */
-
-};
-
-int intc_irq_describe(char* p, int irq)
-{
-	if (irq < NR_INTC_IRQS)
-		return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
-	else
-		return 0;
-}
-#endif
-
 void __init plat_irq_setup(void)
 {
 	unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
 	unsigned long reg;
 	int i;
 
-	intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+	intc_virt = (unsigned long)ioremap_nocache(INTC_BASE, 1024);
 	if (!intc_virt) {
 		panic("Unable to remap INTC\n");
 	}
@@ -196,7 +166,7 @@ void __init plat_irq_setup(void)
 
 	/* Set default: per-line enable/disable, priority driven ack/eoi */
 	for (i = 0; i < NR_INTC_IRQS; i++)
-		irq_desc[i].chip = &intc_irq_type;
+		set_irq_chip_and_handler(i, &intc_irq_type, handle_level_irq);
 
 
 	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 3eb17ee5540..808d99a48ef 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -21,6 +21,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/topology.h>
 
 static inline struct ipr_desc *get_ipr_desc(unsigned int irq)
 {
@@ -59,10 +60,18 @@ void register_ipr_controller(struct ipr_desc *desc)
 
 	for (i = 0; i < desc->nr_irqs; i++) {
 		struct ipr_data *p = desc->ipr_data + i;
+		struct irq_desc *irq_desc;
 
 		BUG_ON(p->ipr_idx >= desc->nr_offsets);
 		BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
 
+		irq_desc = irq_to_desc_alloc_node(p->irq, numa_node_id());
+		if (unlikely(!irq_desc)) {
+			printk(KERN_INFO "can not get irq_desc for %d\n",
+			       p->irq);
+			continue;
+		}
+
 		disable_irq_nosync(p->irq);
 		set_irq_chip_and_handler_name(p->irq, &desc->chip,
 				      handle_level_irq, "level");
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index d2c15791799..4fe863170e3 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -38,32 +38,27 @@ static struct clk_ops sh7619_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7619_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+	return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
 }
 
 static struct clk_ops sh7619_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
-{
-	clk->rate = clk->parent->rate;
-}
-
 static struct clk_ops sh7619_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+	.recalc		= followparent_recalc,
 };
 
 static struct clk_ops *sh7619_clk_ops[] = {
@@ -78,4 +73,3 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 	if (idx < ARRAY_SIZE(sh7619_clk_ops))
 		*ops = sh7619_clk_ops[idx];
 }
-
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 0e32d8e448c..13798733f2d 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 
 enum {
 	UNUSED = 0,
@@ -109,9 +111,75 @@ static struct platform_device eth_device = {
 	.resource = eth_resources,
 };
 
+static struct sh_timer_config cmt0_platform_data = {
+	.name = "CMT0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt0_resources[] = {
+	[0] = {
+		.name	= "CMT0",
+		.start	= 0xf84a0072,
+		.end	= 0xf84a0077,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 86,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt0_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt0_platform_data,
+	},
+	.resource	= cmt0_resources,
+	.num_resources	= ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+	.name = "CMT1",
+	.channel_offset = 0x08,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt1_resources[] = {
+	[0] = {
+		.name	= "CMT1",
+		.start	= 0xf84a0078,
+		.end	= 0xf84a007d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 87,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt1_device = {
+	.name		= "sh_cmt",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &cmt1_platform_data,
+	},
+	.resource	= cmt1_resources,
+	.num_resources	= ARRAY_SIZE(cmt1_resources),
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
 	&sci_device,
 	&eth_device,
+	&cmt0_device,
+	&cmt1_device,
 };
 
 static int __init sh7619_devices_setup(void)
@@ -125,3 +193,19 @@ void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
 }
+
+static struct platform_device *sh7619_early_devices[] __initdata = {
+	&cmt0_device,
+	&cmt1_device,
+};
+
+#define STBCR3 0xf80a0000
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
+
+	early_platform_add_devices(sh7619_early_devices,
+				   ARRAY_SIZE(sh7619_early_devices));
+}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index 4a5e5973233..7814c76159a 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -34,37 +34,37 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate = 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+	return 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7201_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7201_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7201_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inw(FREQCR) >> 4) & 0x0007);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7201_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index fb781329848..94098696510 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -46,33 +46,28 @@ static struct clk_ops sh7203_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7203_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx-2];
+	return clk->parent->rate / pfc_divisors[idx-2];
 }
 
 static struct clk_ops sh7203_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
-{
-	clk->rate = clk->parent->rate;
-}
-
 static struct clk_ops sh7203_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+	.recalc		= followparent_recalc,
 };
 
 static struct clk_ops *sh7203_clk_ops[] = {
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index 82d7f991ef6..c2268bdecee 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -41,29 +41,29 @@ static struct clk_ops sh7206_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7206_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+	return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7206_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FREQCR) & 0x0007);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7206_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 844293723cf..869c2da4820 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 
 enum {
 	UNUSED = 0,
@@ -24,7 +25,7 @@ enum {
 
 	SCIF0, SCIF1,
 
-	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5,
 	MTU2_TGI3B, MTU2_TGI3C,
 
 	/* interrupt groups */
@@ -113,6 +114,99 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
+static struct sh_timer_config mtu2_0_platform_data = {
+	.name = "MTU2_0",
+	.channel_offset = -0x80,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+	[0] = {
+		.name	= "MTU2_0",
+		.start	= 0xff801300,
+		.end	= 0xff801326,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 228,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_0_device = {
+	.name		= "sh_mtu2",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mtu2_0_platform_data,
+	},
+	.resource	= mtu2_0_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+	.name = "MTU2_1",
+	.channel_offset = -0x100,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+	[0] = {
+		.name	= "MTU2_1",
+		.start	= 0xff801380,
+		.end	= 0xff801390,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 234,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_1_device = {
+	.name		= "sh_mtu2",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &mtu2_1_platform_data,
+	},
+	.resource	= mtu2_1_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_1_resources),
+};
+
+static struct sh_timer_config mtu2_2_platform_data = {
+	.name = "MTU2_2",
+	.channel_offset = 0x80,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_2_resources[] = {
+	[0] = {
+		.name	= "MTU2_2",
+		.start	= 0xff801000,
+		.end	= 0xff80100a,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 240,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_2_device = {
+	.name		= "sh_mtu2",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &mtu2_2_platform_data,
+	},
+	.resource	= mtu2_2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_2_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xff804000,
@@ -134,6 +228,9 @@ static struct platform_device sci_device = {
 
 static struct platform_device *mxg_devices[] __initdata = {
 	&sci_device,
+	&mtu2_0_device,
+	&mtu2_1_device,
+	&mtu2_2_device,
 };
 
 static int __init mxg_devices_setup(void)
@@ -147,3 +244,15 @@ void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
 }
+
+static struct platform_device *mxg_early_devices[] __initdata = {
+	&mtu2_0_device,
+	&mtu2_1_device,
+	&mtu2_2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(mxg_early_devices,
+				   ARRAY_SIZE(mxg_early_devices));
+}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index 00f42f9e3f5..d8febe12806 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 
 enum {
 	UNUSED = 0,
@@ -249,9 +251,105 @@ static struct platform_device rtc_device = {
 	.resource	= rtc_resources,
 };
 
+static struct sh_timer_config mtu2_0_platform_data = {
+	.name = "MTU2_0",
+	.channel_offset = -0x80,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+	[0] = {
+		.name	= "MTU2_0",
+		.start	= 0xfffe4300,
+		.end	= 0xfffe4326,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 108,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_0_device = {
+	.name		= "sh_mtu2",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mtu2_0_platform_data,
+	},
+	.resource	= mtu2_0_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+	.name = "MTU2_1",
+	.channel_offset = -0x100,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+	[0] = {
+		.name	= "MTU2_1",
+		.start	= 0xfffe4380,
+		.end	= 0xfffe4390,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 116,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_1_device = {
+	.name		= "sh_mtu2",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &mtu2_1_platform_data,
+	},
+	.resource	= mtu2_1_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_1_resources),
+};
+
+static struct sh_timer_config mtu2_2_platform_data = {
+	.name = "MTU2_2",
+	.channel_offset = 0x80,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_2_resources[] = {
+	[0] = {
+		.name	= "MTU2_2",
+		.start	= 0xfffe4000,
+		.end	= 0xfffe400a,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 124,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_2_device = {
+	.name		= "sh_mtu2",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &mtu2_2_platform_data,
+	},
+	.resource	= mtu2_2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_2_resources),
+};
+
 static struct platform_device *sh7201_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&mtu2_0_device,
+	&mtu2_1_device,
+	&mtu2_2_device,
 };
 
 static int __init sh7201_devices_setup(void)
@@ -265,3 +363,20 @@ void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
 }
+
+static struct platform_device *sh7201_early_devices[] __initdata = {
+	&mtu2_0_device,
+	&mtu2_1_device,
+	&mtu2_2_device,
+};
+
+#define STBCR3 0xfffe0408
+
+void __init plat_early_device_setup(void)
+{
+	/* enable MTU2 clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+	early_platform_add_devices(sh7201_early_devices,
+				   ARRAY_SIZE(sh7201_early_devices));
+}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 820dfb2e865..62e3039d239 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -11,6 +11,8 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 
 enum {
 	UNUSED = 0,
@@ -205,6 +207,132 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config cmt0_platform_data = {
+	.name = "CMT0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt0_resources[] = {
+	[0] = {
+		.name	= "CMT0",
+		.start	= 0xfffec002,
+		.end	= 0xfffec007,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 142,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt0_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt0_platform_data,
+	},
+	.resource	= cmt0_resources,
+	.num_resources	= ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+	.name = "CMT1",
+	.channel_offset = 0x08,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt1_resources[] = {
+	[0] = {
+		.name	= "CMT1",
+		.start	= 0xfffec008,
+		.end	= 0xfffec00d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 143,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt1_device = {
+	.name		= "sh_cmt",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &cmt1_platform_data,
+	},
+	.resource	= cmt1_resources,
+	.num_resources	= ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config mtu2_0_platform_data = {
+	.name = "MTU2_0",
+	.channel_offset = -0x80,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+	[0] = {
+		.name	= "MTU2_0",
+		.start	= 0xfffe4300,
+		.end	= 0xfffe4326,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 146,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_0_device = {
+	.name		= "sh_mtu2",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mtu2_0_platform_data,
+	},
+	.resource	= mtu2_0_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+	.name = "MTU2_1",
+	.channel_offset = -0x100,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+	[0] = {
+		.name	= "MTU2_1",
+		.start	= 0xfffe4380,
+		.end	= 0xfffe4390,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 153,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_1_device = {
+	.name		= "sh_mtu2",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &mtu2_1_platform_data,
+	},
+	.resource	= mtu2_1_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_1_resources),
+};
+
 static struct resource rtc_resources[] = {
 	[0] = {
 		.start	= 0xffff2000,
@@ -227,6 +355,10 @@ static struct platform_device rtc_device = {
 
 static struct platform_device *sh7203_devices[] __initdata = {
 	&sci_device,
+	&cmt0_device,
+	&cmt1_device,
+	&mtu2_0_device,
+	&mtu2_1_device,
 	&rtc_device,
 };
 
@@ -241,3 +373,25 @@ void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
 }
+
+static struct platform_device *sh7203_early_devices[] __initdata = {
+	&cmt0_device,
+	&cmt1_device,
+	&mtu2_0_device,
+	&mtu2_1_device,
+};
+
+#define STBCR3 0xfffe0408
+#define STBCR4 0xfffe040c
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
+
+	/* enable MTU2 clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+	early_platform_add_devices(sh7203_early_devices,
+				   ARRAY_SIZE(sh7203_early_devices));
+}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index c46a8355726..3e6f3d7a58b 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 
 enum {
 	UNUSED = 0,
@@ -165,8 +167,170 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config cmt0_platform_data = {
+	.name = "CMT0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt0_resources[] = {
+	[0] = {
+		.name	= "CMT0",
+		.start	= 0xfffec002,
+		.end	= 0xfffec007,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 140,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt0_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt0_platform_data,
+	},
+	.resource	= cmt0_resources,
+	.num_resources	= ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+	.name = "CMT1",
+	.channel_offset = 0x08,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt1_resources[] = {
+	[0] = {
+		.name	= "CMT1",
+		.start	= 0xfffec008,
+		.end	= 0xfffec00d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 144,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt1_device = {
+	.name		= "sh_cmt",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &cmt1_platform_data,
+	},
+	.resource	= cmt1_resources,
+	.num_resources	= ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config mtu2_0_platform_data = {
+	.name = "MTU2_0",
+	.channel_offset = -0x80,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+	[0] = {
+		.name	= "MTU2_0",
+		.start	= 0xfffe4300,
+		.end	= 0xfffe4326,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 156,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_0_device = {
+	.name		= "sh_mtu2",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mtu2_0_platform_data,
+	},
+	.resource	= mtu2_0_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+	.name = "MTU2_1",
+	.channel_offset = -0x100,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+	[0] = {
+		.name	= "MTU2_1",
+		.start	= 0xfffe4380,
+		.end	= 0xfffe4390,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 164,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_1_device = {
+	.name		= "sh_mtu2",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &mtu2_1_platform_data,
+	},
+	.resource	= mtu2_1_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_1_resources),
+};
+
+static struct sh_timer_config mtu2_2_platform_data = {
+	.name = "MTU2_2",
+	.channel_offset = 0x80,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_2_resources[] = {
+	[0] = {
+		.name	= "MTU2_2",
+		.start	= 0xfffe4000,
+		.end	= 0xfffe400a,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 180,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mtu2_2_device = {
+	.name		= "sh_mtu2",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &mtu2_2_platform_data,
+	},
+	.resource	= mtu2_2_resources,
+	.num_resources	= ARRAY_SIZE(mtu2_2_resources),
+};
+
 static struct platform_device *sh7206_devices[] __initdata = {
 	&sci_device,
+	&cmt0_device,
+	&cmt1_device,
+	&mtu2_0_device,
+	&mtu2_1_device,
+	&mtu2_2_device,
 };
 
 static int __init sh7206_devices_setup(void)
@@ -180,3 +344,26 @@ void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
 }
+
+static struct platform_device *sh7206_early_devices[] __initdata = {
+	&cmt0_device,
+	&cmt1_device,
+	&mtu2_0_device,
+	&mtu2_1_device,
+	&mtu2_2_device,
+};
+
+#define STBCR3 0xfffe0408
+#define STBCR4 0xfffe040c
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
+
+	/* enable MTU2 clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+	early_platform_add_devices(sh7206_early_devices,
+				   ARRAY_SIZE(sh7206_early_devices));
+}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
index c3c945958ba..27b8738f0b0 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh3.c
@@ -38,36 +38,36 @@ static struct clk_ops sh3_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh3_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
 
-	clk->rate = clk->parent->rate / stc_multipliers[idx];
+	return clk->parent->rate / stc_multipliers[idx];
 }
 
 static struct clk_ops sh3_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
 
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh3_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
index dfdbf3277fd..0ca8f2c3646 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
@@ -39,30 +39,30 @@ static struct clk_ops sh7705_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = ctrl_inw(FRQCR) & 0x0003;
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7705_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
-	clk->rate = clk->parent->rate / stc_multipliers[idx];
+	return clk->parent->rate / stc_multipliers[idx];
 }
 
 static struct clk_ops sh7705_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7705_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
index 0cf96f9833b..4bf7887d310 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -34,36 +34,36 @@ static struct clk_ops sh7706_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7706_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
 
-	clk->rate = clk->parent->rate / stc_multipliers[idx];
+	return clk->parent->rate / stc_multipliers[idx];
 }
 
 static struct clk_ops sh7706_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
 
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7706_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index b791a29fdb6..fa30b601773 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -41,12 +41,12 @@ static struct clk_ops sh7709_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7709_module_clk_ops = {
@@ -56,25 +56,25 @@ static struct clk_ops sh7709_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = (frqcr & 0x0080) ?
 		((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
 
-	clk->rate = clk->parent->rate * stc_multipliers[idx];
+	return clk->parent->rate * stc_multipliers[idx];
 }
 
 static struct clk_ops sh7709_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
 
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7709_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
index 4744c50ec44..030a58ba18a 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
@@ -33,30 +33,30 @@ static struct clk_ops sh7710_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) & 0x0007);
-	clk->rate = clk->parent->rate / md_table[idx];
+	return clk->parent->rate / md_table[idx];
 }
 
 static struct clk_ops sh7710_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
-	clk->rate = clk->parent->rate / md_table[idx];
+	return clk->parent->rate / md_table[idx];
 }
 
 static struct clk_ops sh7710_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
-	clk->rate = clk->parent->rate / md_table[idx];
+	return clk->parent->rate / md_table[idx];
 }
 
 static struct clk_ops sh7710_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
index 54f54df51ef..6428ee6c77e 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
@@ -33,24 +33,24 @@ static struct clk_ops sh7712_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = frqcr & 0x0007;
 
-	clk->rate = clk->parent->rate / divisors[idx];
+	return clk->parent->rate / divisors[idx];
 }
 
 static struct clk_ops sh7712_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
 	int idx = (frqcr & 0x0030) >> 4;
 
-	clk->rate = clk->parent->rate / divisors[idx];
+	return clk->parent->rate / divisors[idx];
 }
 
 static struct clk_ops sh7712_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 63b67badd67..88f742fed9e 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <asm/rtc.h>
 
 enum {
@@ -116,7 +117,102 @@ static struct platform_device rtc_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xfffffe94,
+		.end	= 0xfffffe9f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0xe,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xfffffea0,
+		.end	= 0xfffffeab,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1a,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xfffffeac,
+		.end	= 0xfffffebb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct platform_device *sh7705_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&sci_device,
 	&rtc_device,
 };
@@ -128,6 +224,18 @@ static int __init sh7705_devices_setup(void)
 }
 __initcall(sh7705_devices_setup);
 
+static struct platform_device *sh7705_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7705_early_devices,
+				   ARRAY_SIZE(sh7705_early_devices));
+}
+
 void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index a74f960b5e7..c5630679858 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 
 enum {
 	UNUSED = 0,
@@ -144,7 +145,102 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xfffffe94,
+		.end	= 0xfffffe9f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0xe,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xfffffea0,
+		.end	= 0xfffffeab,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1a,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xfffffeac,
+		.end	= 0xfffffebb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct platform_device *sh770x_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&sci_device,
 	&rtc_device,
 };
@@ -156,6 +252,18 @@ static int __init sh770x_devices_setup(void)
 }
 __initcall(sh770x_devices_setup);
 
+static struct platform_device *sh770x_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh770x_early_devices,
+				   ARRAY_SIZE(sh770x_early_devices));
+}
+
 void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 335098b66e2..efa76c8148f 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <asm/rtc.h>
 
 enum {
@@ -120,7 +121,102 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xa412fe94,
+		.end	= 0xa412fe9f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0xe,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xa412fea0,
+		.end	= 0xa412feab,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1a,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xa412feac,
+		.end	= 0xa412feb5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct platform_device *sh7710_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&sci_device,
 	&rtc_device,
 };
@@ -132,6 +228,18 @@ static int __init sh7710_devices_setup(void)
 }
 __initcall(sh7710_devices_setup);
 
+static struct platform_device *sh7710_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7710_early_devices,
+				   ARRAY_SIZE(sh7710_early_devices));
+}
+
 void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 003874a2fd2..5b2107798ed 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -18,6 +18,7 @@
 #include <linux/serial.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <asm/rtc.h>
 
 static struct resource rtc_resources[] = {
@@ -123,7 +124,259 @@ static struct platform_device usbf_device = {
 	.resource	= usbf_resources,
 };
 
+static struct sh_timer_config cmt0_platform_data = {
+	.name = "CMT0",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt0_resources[] = {
+	[0] = {
+		.name	= "CMT0",
+		.start	= 0x044a0010,
+		.end	= 0x044a001b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt0_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt0_platform_data,
+	},
+	.resource	= cmt0_resources,
+	.num_resources	= ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+	.name = "CMT1",
+	.channel_offset = 0x20,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource cmt1_resources[] = {
+	[0] = {
+		.name	= "CMT1",
+		.start	= 0x044a0020,
+		.end	= 0x044a002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt1_device = {
+	.name		= "sh_cmt",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &cmt1_platform_data,
+	},
+	.resource	= cmt1_resources,
+	.num_resources	= ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config cmt2_platform_data = {
+	.name = "CMT2",
+	.channel_offset = 0x30,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource cmt2_resources[] = {
+	[0] = {
+		.name	= "CMT2",
+		.start	= 0x044a0030,
+		.end	= 0x044a003b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt2_device = {
+	.name		= "sh_cmt",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &cmt2_platform_data,
+	},
+	.resource	= cmt2_resources,
+	.num_resources	= ARRAY_SIZE(cmt2_resources),
+};
+
+static struct sh_timer_config cmt3_platform_data = {
+	.name = "CMT3",
+	.channel_offset = 0x40,
+	.timer_bit = 3,
+	.clk = "peripheral_clk",
+};
+
+static struct resource cmt3_resources[] = {
+	[0] = {
+		.name	= "CMT3",
+		.start	= 0x044a0040,
+		.end	= 0x044a004b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt3_device = {
+	.name		= "sh_cmt",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &cmt3_platform_data,
+	},
+	.resource	= cmt3_resources,
+	.num_resources	= ARRAY_SIZE(cmt3_resources),
+};
+
+static struct sh_timer_config cmt4_platform_data = {
+	.name = "CMT4",
+	.channel_offset = 0x50,
+	.timer_bit = 4,
+	.clk = "peripheral_clk",
+};
+
+static struct resource cmt4_resources[] = {
+	[0] = {
+		.name	= "CMT4",
+		.start	= 0x044a0050,
+		.end	= 0x044a005b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt4_device = {
+	.name		= "sh_cmt",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &cmt4_platform_data,
+	},
+	.resource	= cmt4_resources,
+	.num_resources	= ARRAY_SIZE(cmt4_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x02,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xa412fe94,
+		.end	= 0xa412fe9f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0xe,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xa412fea0,
+		.end	= 0xa412feab,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1a,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xa412feac,
+		.end	= 0xa412feb5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct platform_device *sh7720_devices[] __initdata = {
+	&cmt0_device,
+	&cmt1_device,
+	&cmt2_device,
+	&cmt3_device,
+	&cmt4_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&rtc_device,
 	&sci_device,
 	&usb_ohci_device,
@@ -137,6 +390,23 @@ static int __init sh7720_devices_setup(void)
 }
 __initcall(sh7720_devices_setup);
 
+static struct platform_device *sh7720_early_devices[] __initdata = {
+	&cmt0_device,
+	&cmt1_device,
+	&cmt2_device,
+	&cmt3_device,
+	&cmt4_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7720_early_devices,
+				   ARRAY_SIZE(sh7720_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index a33429463e9..21421e34e7d 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -21,10 +21,10 @@
 static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
 static int frqcr3_values[]   = { 0, 1, 2, 3, 4, 5, 6  };
 
-static void emi_clk_recalc(struct clk *clk)
+static unsigned long emi_clk_recalc(struct clk *clk)
 {
 	int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
-	clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
 static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
@@ -46,14 +46,14 @@ static struct clk_ops sh4202_emi_clk_ops = {
 
 static struct clk sh4202_emi_clk = {
 	.name		= "emi_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh4202_emi_clk_ops,
 };
 
-static void femi_clk_recalc(struct clk *clk)
+static unsigned long femi_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
-	clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
 static struct clk_ops sh4202_femi_clk_ops = {
@@ -62,7 +62,7 @@ static struct clk_ops sh4202_femi_clk_ops = {
 
 static struct clk sh4202_femi_clk = {
 	.name		= "femi_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh4202_femi_clk_ops,
 };
 
@@ -90,10 +90,10 @@ static void shoc_clk_init(struct clk *clk)
 	WARN_ON(i == ARRAY_SIZE(frqcr3_divisors));	/* Undefined clock */
 }
 
-static void shoc_clk_recalc(struct clk *clk)
+static unsigned long shoc_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
-	clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
 static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
@@ -140,7 +140,7 @@ static struct clk_ops sh4202_shoc_clk_ops = {
 
 static struct clk sh4202_shoc_clk = {
 	.name		= "shoc_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh4202_shoc_clk_ops,
 };
 
@@ -150,31 +150,22 @@ static struct clk *sh4202_onchip_clocks[] = {
 	&sh4202_shoc_clk,
 };
 
-static int __init sh4202_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
+	struct clk *clk;
+	int i, ret = 0;
+
+	cpg_clk_init();
 
+	clk = clk_get(NULL, "master_clk");
 	for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
 		struct clk *clkp = sh4202_onchip_clocks[i];
 
 		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
+		ret |= clk_register(clkp);
 	}
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
-
 	clk_put(clk);
 
-	return 0;
+	return ret;
 }
-
-arch_initcall(sh4202_clk_init);
-
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
index dca9f87a12d..73294d9cd04 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4.c
@@ -35,30 +35,30 @@ static struct clk_ops sh4_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) & 0x0007);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh4_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate / bfc_divisors[idx];
 }
 
 static struct clk_ops sh4_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh4_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 91e3677ae09..6c78d0a9c85 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -60,12 +60,18 @@ int __init detect_cpu_and_cache_system(void)
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 
-		boot_cpu_data.flags |= CPU_HAS_LLSC;
+		boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
 		boot_cpu_data.cut_major = pvr & 0x7f;
+
+		boot_cpu_data.icache.ways = 4;
+		boot_cpu_data.dcache.ways = 4;
+	} else {
+		/* And some SH-4 defaults.. */
+		boot_cpu_data.flags |= CPU_HAS_PTEA;
 	}
 
 	/* FPU detection works for everyone */
-	if ((cvr & 0x20000000) == 1)
+	if ((cvr & 0x20000000))
 		boot_cpu_data.flags |= CPU_HAS_FPU;
 
 	/* Mask off the upper chip ID */
@@ -78,25 +84,20 @@ int __init detect_cpu_and_cache_system(void)
 	switch (pvr) {
 	case 0x205:
 		boot_cpu_data.type = CPU_SH7750;
-		boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
-				   CPU_HAS_PERF_COUNTER;
+		boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
+				       CPU_HAS_PERF_COUNTER;
 		break;
 	case 0x206:
 		boot_cpu_data.type = CPU_SH7750S;
-		boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
-				   CPU_HAS_PERF_COUNTER;
+		boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
+				       CPU_HAS_PERF_COUNTER;
 		break;
 	case 0x1100:
 		boot_cpu_data.type = CPU_SH7751;
-		boot_cpu_data.flags |= CPU_HAS_FPU;
 		break;
 	case 0x2001:
 	case 0x2004:
 		boot_cpu_data.type = CPU_SH7770;
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-
-		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC;
 		break;
 	case 0x2006:
 	case 0x200A:
@@ -107,45 +108,26 @@ int __init detect_cpu_and_cache_system(void)
 		else
 			boot_cpu_data.type = CPU_SH7780;
 
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-
-		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
-				   CPU_HAS_LLSC;
 		break;
 	case 0x3000:
 	case 0x3003:
 	case 0x3009:
 		boot_cpu_data.type = CPU_SH7343;
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-		boot_cpu_data.flags |= CPU_HAS_LLSC;
 		break;
 	case 0x3004:
 	case 0x3007:
 		boot_cpu_data.type = CPU_SH7785;
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
-					  CPU_HAS_LLSC;
 		break;
 	case 0x4004:
 		boot_cpu_data.type = CPU_SH7786;
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
-			CPU_HAS_LLSC | CPU_HAS_PTEAEX;
+		boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
 		break;
 	case 0x3008:
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-		boot_cpu_data.flags |= CPU_HAS_LLSC;
-
 		switch (prr) {
 		case 0x50:
 		case 0x51:
 			boot_cpu_data.type = CPU_SH7723;
-			boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
+			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
 			break;
 		case 0x70:
 			boot_cpu_data.type = CPU_SH7366;
@@ -156,13 +138,13 @@ int __init detect_cpu_and_cache_system(void)
 			break;
 		}
 		break;
+	case 0x300b:
+		boot_cpu_data.type = CPU_SH7724;
+		boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+		break;
 	case 0x4000:	/* 1st cut */
 	case 0x4001:	/* 2nd cut */
 		boot_cpu_data.type = CPU_SHX3;
-		boot_cpu_data.icache.ways = 4;
-		boot_cpu_data.dcache.ways = 4;
-		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
-					  CPU_HAS_LLSC;
 		break;
 	case 0x700:
 		boot_cpu_data.type = CPU_SH4_501;
@@ -173,7 +155,6 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.type = CPU_SH4_202;
 		boot_cpu_data.icache.ways = 2;
 		boot_cpu_data.dcache.ways = 2;
-		boot_cpu_data.flags |= CPU_HAS_FPU;
 		break;
 	case 0x500 ... 0x501:
 		switch (prr) {
@@ -191,18 +172,12 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.icache.ways = 2;
 		boot_cpu_data.dcache.ways = 2;
 
-		boot_cpu_data.flags |= CPU_HAS_FPU;
-
 		break;
 	default:
 		boot_cpu_data.type = CPU_SH_NONE;
 		break;
 	}
 
-#ifdef CONFIG_CPU_HAS_PTEA
-	boot_cpu_data.flags |= CPU_HAS_PTEA;
-#endif
-
 	/*
 	 * On anything that's not a direct-mapped cache, look to the CVR
 	 * for I/D-cache specifics.
@@ -222,43 +197,48 @@ int __init detect_cpu_and_cache_system(void)
 	}
 
 	/*
-	 * Setup the L2 cache desc
-	 *
 	 * SH-4A's have an optional PIPT L2.
 	 */
 	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
-		/* Bug if we can't decode the L2 info */
-		BUG_ON(!(cvr & 0xf));
-
-		/* Silicon and specifications have clearly never met.. */
-		cvr ^= 0xf;
-
 		/*
-		 * Size calculation is much more sensible
-		 * than it is for the L1.
-		 *
-		 * Sizes are 128KB, 258KB, 512KB, and 1MB.
+		 * Verify that it really has something hooked up, this
+		 * is the safety net for CPUs that have optional L2
+		 * support yet do not implement it.
 		 */
-		size = (cvr & 0xf) << 17;
-
-		BUG_ON(!size);
-
-		boot_cpu_data.scache.way_incr		= (1 << 16);
-		boot_cpu_data.scache.entry_shift	= 5;
-		boot_cpu_data.scache.ways		= 4;
-		boot_cpu_data.scache.linesz		= L1_CACHE_BYTES;
-
-		boot_cpu_data.scache.entry_mask	=
-			(boot_cpu_data.scache.way_incr -
-			 boot_cpu_data.scache.linesz);
-
-		boot_cpu_data.scache.sets	= size /
-			(boot_cpu_data.scache.linesz *
-			 boot_cpu_data.scache.ways);
-
-		boot_cpu_data.scache.way_size	=
-			(boot_cpu_data.scache.sets *
-			 boot_cpu_data.scache.linesz);
+		if ((cvr & 0xf) == 0)
+			boot_cpu_data.flags &= ~CPU_HAS_L2_CACHE;
+		else {
+			/*
+			 * Silicon and specifications have clearly never
+			 * met..
+			 */
+			cvr ^= 0xf;
+
+			/*
+			 * Size calculation is much more sensible
+			 * than it is for the L1.
+			 *
+			 * Sizes are 128KB, 258KB, 512KB, and 1MB.
+			 */
+			size = (cvr & 0xf) << 17;
+
+			boot_cpu_data.scache.way_incr		= (1 << 16);
+			boot_cpu_data.scache.entry_shift	= 5;
+			boot_cpu_data.scache.ways		= 4;
+			boot_cpu_data.scache.linesz		= L1_CACHE_BYTES;
+
+			boot_cpu_data.scache.entry_mask	=
+				(boot_cpu_data.scache.way_incr -
+				 boot_cpu_data.scache.linesz);
+
+			boot_cpu_data.scache.sets	= size /
+				(boot_cpu_data.scache.linesz *
+				 boot_cpu_data.scache.ways);
+
+			boot_cpu_data.scache.way_size	=
+				(boot_cpu_data.scache.sets *
+				 boot_cpu_data.scache.linesz);
+		}
 	}
 
 	return 0;
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 7371abf64f8..6d088d12359 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -2,6 +2,7 @@
  * SH4-202 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2009  Magnus Damm
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -11,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -31,8 +34,103 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct platform_device *sh4202_devices[] __initdata = {
 	&sci_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 };
 
 static int __init sh4202_devices_setup(void)
@@ -42,7 +140,71 @@ static int __init sh4202_devices_setup(void)
 }
 __initcall(sh4202_devices_setup);
 
+static struct platform_device *sh4202_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh4202_early_devices,
+				   ARRAY_SIZE(sh4202_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
+	HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
+	INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
+	INTC_VECT(WDT, 0x560),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+	{ 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
+	{ 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
+	{ 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct intc_vect vectors_irlm[] __initdata = {
+	INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
+	INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
+			 NULL, prio_registers, NULL);
+
 void __init plat_irq_setup(void)
 {
-	/* do nothing - all IRL interrupts are handled by the board code */
+	register_intc_controller(&intc_desc);
+}
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM   (1<<7)
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
+		ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		register_intc_controller(&intc_desc_irlm);
+		break;
+	default:
+		BUG();
+	}
 }
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index a1c80d909cd..851672d15cf 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
+#include <linux/sh_timer.h>
 #include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
@@ -60,9 +61,177 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xfe100008,
+		.end	= 0xfe100013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xfe100014,
+		.end	= 0xfe10001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 76,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+#endif
+
 static struct platform_device *sh7750_devices[] __initdata = {
 	&rtc_device,
 	&sci_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+	&tmu3_device,
+	&tmu4_device,
+#endif
 };
 
 static int __init sh7750_devices_setup(void)
@@ -72,6 +241,24 @@ static int __init sh7750_devices_setup(void)
 }
 __initcall(sh7750_devices_setup);
 
+static struct platform_device *sh7750_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7751R)
+	&tmu3_device,
+	&tmu4_device,
+#endif
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7750_early_devices,
+				   ARRAY_SIZE(sh7750_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index d9bdc931ac0..5b822519bd9 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -10,6 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/sh_timer.h>
 #include <linux/serial_sci.h>
 #include <linux/io.h>
 
@@ -18,10 +19,7 @@ enum {
 
 	/* interrupt sources */
 	IRL0, IRL1, IRL2, IRL3,
-	HUDI, GPIOI,
-	DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3,
-	DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7,
-	DMAC_DMAE,
+	HUDI, GPIOI, DMAC,
 	IRQ4, IRQ5, IRQ6, IRQ7,
 	HCAN20, HCAN21,
 	SSI0, SSI1,
@@ -36,21 +34,20 @@ enum {
 	HSPI,
 	MMCIF0, MMCIF1, MMCIF2, MMCIF3,
 	MFI, ADC, CMT,
-	TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
-	WDT,
-	REF_RCMI, REF_ROVI,
+	TMU0, TMU1, TMU2,
+	WDT, REF,
 
 	/* interrupt groups */
-	DMAC, DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, TMU2, REF,
+	DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
-	INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
-	INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
-	INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0),
-	INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0),
-	INTC_VECT(DMAC_DMAE, 0x6c0),
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+	INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
+	INTC_VECT(DMAC, 0x6c0),
 	INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
 	INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
 	INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
@@ -74,23 +71,18 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
 	INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
 	INTC_VECT(WDT, 0x560),
-	INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0),
+	INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
 };
 
 static struct intc_group groups[] __initdata = {
-	INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
-		   DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5,
-		   DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE),
 	INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
 	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
 	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
 	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
 	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
 	INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
-	INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
-	INTC_GROUP(REF, REF_RCMI, REF_ROVI),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
@@ -168,8 +160,104 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+
 static struct platform_device *sh7760_devices[] __initdata = {
 	&sci_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 };
 
 static int __init sh7760_devices_setup(void)
@@ -179,6 +267,18 @@ static int __init sh7760_devices_setup(void)
 }
 __initcall(sh7760_devices_setup);
 
+static struct platform_device *sh7760_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7760_early_devices,
+				   ARRAY_SIZE(sh7760_early_devices));
+}
+
 #define INTC_ICR	0xffd00000UL
 #define INTC_ICR_IRLM	(1 << 7)
 
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 1a92361feeb..96ea09ca8cc 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= setup-sh7786.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7724)	+= setup-sh7724.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
@@ -23,15 +24,17 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7366.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
 # Pinmux setup
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
new file mode 100644
index 00000000000..0ee3ee86125
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -0,0 +1,211 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+ *
+ * SH7343 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+/* SH7343 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.name           = "rclk",
+	.id             = -1,
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
+};
+
+/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.name           = "dll_clk",
+	.id             = -1,
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_NR };
+
+#define DIV4(_str, _reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
+};
+
+struct clk div6_clks[] = {
+	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_str, _parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[] = {
+	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	MSTP("intc3", &div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	MSTP("dmac0", &div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	MSTP("sh0", &div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	MSTP("ubc0", &div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
+	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
+	MSTP("mfi0", &div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	MSTP("scif3", &div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	MSTP("sio0", &div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	MSTP("siof0", &div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	MSTP("siof1", &div4_clks[DIV4_P], MSTPCR0, 1, 0),
+
+	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
+	MSTP("i2c1", &div4_clks[DIV4_P], MSTPCR1, 8, 0),
+
+	MSTP("tpu0", &div4_clks[DIV4_P], MSTPCR2, 25, 0),
+	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0),
+	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	MSTP("mmcif0", &div4_clks[DIV4_P], MSTPCR2, 17, 0),
+	MSTP("sim0", &div4_clks[DIV4_P], MSTPCR2, 16, 0),
+	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0),
+	MSTP("tsif0", &div4_clks[DIV4_P], MSTPCR2, 13, 0),
+	MSTP("s3d40", &div4_clks[DIV4_P], MSTPCR2, 12, 0),
+	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0),
+	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
+	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+
+	return ret;
+}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
new file mode 100644
index 00000000000..a95ebaba095
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -0,0 +1,211 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+ *
+ * SH7366 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+/* SH7366 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.name           = "rclk",
+	.id             = -1,
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
+};
+
+/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.name           = "dll_clk",
+	.id             = -1,
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_NR };
+
+#define DIV4(_str, _reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
+};
+
+struct clk div6_clks[] = {
+	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_str, _parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[] = {
+	/* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
+	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	MSTP("rsmem0", &div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	MSTP("intc3", &div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	MSTP("dmac0", &div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	MSTP("sh0", &div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	MSTP("ubc0", &div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
+	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
+	MSTP("mfi0", &div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	MSTP("msiof0", &div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	MSTP("sbr0", &div4_clks[DIV4_P], MSTPCR0, 1, 0),
+
+	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
+
+	MSTP("icb0", &div4_clks[DIV4_P], MSTPCR2, 27, 0),
+	MSTP("meram0", &div4_clks[DIV4_P], MSTPCR2, 26, 0),
+	MSTP("dacy1", &div4_clks[DIV4_P], MSTPCR2, 24, 0),
+	MSTP("dacy0", &div4_clks[DIV4_P], MSTPCR2, 23, 0),
+	MSTP("tsif0", &div4_clks[DIV4_P], MSTPCR2, 22, 0),
+	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	MSTP("mmcif0", &div4_clks[DIV4_P], MSTPCR2, 17, 0),
+	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 9, 0),
+	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
+	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+
+	return ret;
+}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 0e174af2187..40f859354f7 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,844 +1,197 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
+ * SH7722 clock framework support
  *
- * Copyright (c) 2006-2007 Nomad Global Solutions Inc
- * Based on code for sh7343 by Paul Mundt
+ * Copyright (C) 2009 Magnus Damm
  *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/stringify.h>
 #include <asm/clock.h>
-#include <asm/freq.h>
-
-#define N  (-1)
-#define NM (-2)
-#define ROUND_NEAREST 0
-#define ROUND_DOWN -1
-#define ROUND_UP   +1
-
-static int adjust_algos[][3] = {
-	{},	/* NO_CHANGE */
-	{ NM, N, 1 },   /* N:1, N:1 */
-	{ 3, 2, 2 },	/* 3:2:2 */
-	{ 5, 2, 2 },    /* 5:2:2 */
-	{ N, 1, 1 },	/* N:1:1 */
-
-	{ N, 1 },	/* N:1 */
 
-	{ N, 1 },	/* N:1 */
-	{ 3, 2 },
-	{ 4, 3 },
-	{ 5, 4 },
-
-	{ N, 1 }
+/* SH7722 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.name           = "rclk",
+	.id             = -1,
+	.rate           = 32768,
 };
 
-static unsigned long adjust_pair_of_clocks(unsigned long r1, unsigned long r2,
-			int m1, int m2, int round_flag)
-{
-	unsigned long rem, div;
-	int the_one = 0;
-
-	pr_debug( "Actual values: r1 = %ld\n", r1);
-	pr_debug( "...............r2 = %ld\n", r2);
-
-	if (m1 == m2) {
-		r2 = r1;
-		pr_debug( "setting equal rates: r2 now %ld\n", r2);
-	} else if ((m2 == N  && m1 == 1) ||
-		   (m2 == NM && m1 == N)) { /* N:1 or NM:N */
-		pr_debug( "Setting rates as 1:N (N:N*M)\n");
-		rem = r2 % r1;
-		pr_debug( "...remainder = %ld\n", rem);
-		if (rem) {
-			div = r2 / r1;
-			pr_debug( "...div = %ld\n", div);
-			switch (round_flag) {
-			case ROUND_NEAREST:
-				the_one = rem >= r1/2 ? 1 : 0; break;
-			case ROUND_UP:
-				the_one = 1; break;
-			case ROUND_DOWN:
-				the_one = 0; break;
-			}
-
-			r2 = r1 * (div + the_one);
-			pr_debug( "...setting r2 to %ld\n", r2);
-		}
-	} else if ((m2 == 1  && m1 == N) ||
-		   (m2 == N && m1 == NM)) { /* 1:N or N:NM */
-		pr_debug( "Setting rates as N:1 (N*M:N)\n");
-		rem = r1 % r2;
-		pr_debug( "...remainder = %ld\n", rem);
-		if (rem) {
-			div = r1 / r2;
-			pr_debug( "...div = %ld\n", div);
-			switch (round_flag) {
-			case ROUND_NEAREST:
-				the_one = rem > r2/2 ? 1 : 0; break;
-			case ROUND_UP:
-				the_one = 0; break;
-			case ROUND_DOWN:
-				the_one = 1; break;
-			}
-
-			r2 = r1 / (div + the_one);
-			pr_debug( "...setting r2 to %ld\n", r2);
-		}
-	} else { /* value:value */
-		pr_debug( "Setting rates as %d:%d\n", m1, m2);
-		div = r1 / m1;
-		r2 = div * m2;
-		pr_debug( "...div = %ld\n", div);
-		pr_debug( "...setting r2 to %ld\n", r2);
-	}
-
-	return r2;
-}
-
-static void adjust_clocks(int originate, int *l, unsigned long v[],
-			  int n_in_line)
-{
-	int x;
-
-	pr_debug( "Go down from %d...\n", originate);
-	/* go up recalculation clocks */
-	for (x = originate; x>0; x -- )
-		v[x-1] = adjust_pair_of_clocks(v[x], v[x-1],
-					l[x], l[x-1],
-					ROUND_UP);
-
-	pr_debug( "Go up from %d...\n", originate);
-	/* go down recalculation clocks */
-	for (x = originate; x<n_in_line - 1; x ++ )
-		v[x+1] = adjust_pair_of_clocks(v[x], v[x+1],
-					l[x], l[x+1],
-					ROUND_UP);
-}
-
-
 /*
- * SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
  */
-
-/*
- * Instead of having two separate multipliers/divisors set, like this:
- *
- * static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
- * static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
- *
- * I created the divisors2 array, which is used to calculate rate like
- *   rate = parent * 2 / divisors2[ divisor ];
-*/
-static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 };
-
-static void master_clk_recalc(struct clk *clk)
-{
-	unsigned frqcr = ctrl_inl(FRQCR);
-
-	clk->rate = CONFIG_SH_PCLK_FREQ * (((frqcr >> 24) & 0x1f) + 1);
-}
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->parent = NULL;
-	clk->flags |= CLK_RATE_PROPAGATES;
-	clk->rate = CONFIG_SH_PCLK_FREQ;
-	master_clk_recalc(clk);
-}
-
-
-static void module_clk_recalc(struct clk *clk)
-{
-	unsigned long frqcr = ctrl_inl(FRQCR);
-
-	clk->rate = clk->parent->rate / (((frqcr >> 24) & 0x1f) + 1);
-}
-
-static int master_clk_setrate(struct clk *clk, unsigned long rate, int id)
-{
-	int div = rate / clk->rate;
-	int master_divs[] = { 2, 3, 4, 6, 8, 16 };
-	int index;
-	unsigned long frqcr;
-
-	for (index = 1; index < ARRAY_SIZE(master_divs); index++)
-		if (div >= master_divs[index - 1] && div < master_divs[index])
-			break;
-
-	if (index >= ARRAY_SIZE(master_divs))
-		index = ARRAY_SIZE(master_divs);
-	div = master_divs[index - 1];
-
-	frqcr = ctrl_inl(FRQCR);
-	frqcr &= ~(0xF << 24);
-	frqcr |= ( (div-1) << 24);
-	ctrl_outl(frqcr, FRQCR);
-
-	return 0;
-}
-
-static struct clk_ops sh7722_master_clk_ops = {
-	.init = master_clk_init,
-	.recalc = master_clk_recalc,
-	.set_rate = master_clk_setrate,
-};
-
-static struct clk_ops sh7722_module_clk_ops = {
-       .recalc = module_clk_recalc,
-};
-
-struct frqcr_context {
-	unsigned mask;
-	unsigned shift;
-};
-
-struct frqcr_context sh7722_get_clk_context(const char *name)
-{
-	struct frqcr_context ctx = { 0, };
-
-	if (!strcmp(name, "peripheral_clk")) {
-		ctx.shift = 0;
-		ctx.mask = 0xF;
-	} else if (!strcmp(name, "sdram_clk")) {
-		ctx.shift = 4;
-		ctx.mask = 0xF;
-	} else if (!strcmp(name, "bus_clk")) {
-		ctx.shift = 8;
-		ctx.mask = 0xF;
-	} else if (!strcmp(name, "sh_clk")) {
-		ctx.shift = 12;
-		ctx.mask = 0xF;
-	} else if (!strcmp(name, "umem_clk")) {
-		ctx.shift = 16;
-		ctx.mask = 0xF;
-	} else if (!strcmp(name, "cpu_clk")) {
-		ctx.shift = 20;
-		ctx.mask = 7;
-	}
-	return ctx;
-}
-
-/**
- * sh7722_find_div_index - find divisor for setting rate
- *
- * All sh7722 clocks use the same set of multipliers/divisors. This function
- * chooses correct divisor to set the rate of clock with parent clock that
- * generates frequency of 'parent_rate'
- *
- * @parent_rate: rate of parent clock
- * @rate: requested rate to be set
- */
-static int sh7722_find_div_index(unsigned long parent_rate, unsigned rate)
-{
-	unsigned div2 = parent_rate * 2 / rate;
-	int index;
-
-	if (rate > parent_rate)
-		return -EINVAL;
-
-	for (index = 1; index < ARRAY_SIZE(divisors2); index++) {
-		if (div2 > divisors2[index - 1] && div2 <= divisors2[index])
-			break;
-	}
-	if (index >= ARRAY_SIZE(divisors2))
-		index = ARRAY_SIZE(divisors2) - 1;
-	return index;
-}
-
-static void sh7722_frqcr_recalc(struct clk *clk)
-{
-	struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
-	unsigned long frqcr = ctrl_inl(FRQCR);
-	int index;
-
-	index = (frqcr >> ctx.shift) & ctx.mask;
-	clk->rate = clk->parent->rate * 2 / divisors2[index];
-}
-
-static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate,
-				 int algo_id)
-{
-	struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
-	unsigned long parent_rate = clk->parent->rate;
-	int div;
-	unsigned long frqcr;
-	int err = 0;
-
-	/* pretty invalid */
-	if (parent_rate < rate)
-		return -EINVAL;
-
-	/* look for multiplier/divisor pair */
-	div = sh7722_find_div_index(parent_rate, rate);
-	if (div<0)
-		return div;
-
-	/* calculate new value of clock rate */
-	clk->rate = parent_rate * 2 / divisors2[div];
-	frqcr = ctrl_inl(FRQCR);
-
-	/* FIXME: adjust as algo_id specifies */
-	if (algo_id != NO_CHANGE) {
-		int originator;
-		char *algo_group_1[] = { "cpu_clk", "umem_clk", "sh_clk" };
-		char *algo_group_2[] = { "sh_clk", "bus_clk" };
-		char *algo_group_3[] = { "sh_clk", "sdram_clk" };
-		char *algo_group_4[] = { "bus_clk", "peripheral_clk" };
-		char *algo_group_5[] = { "cpu_clk", "peripheral_clk" };
-		char **algo_current = NULL;
-		/* 3 is the maximum number of clocks in relation */
-		struct clk *ck[3];
-		unsigned long values[3]; /* the same comment as above */
-		int part_length = -1;
-		int i;
-
-		/*
-		 * all the steps below only required if adjustion was
-		 * requested
-		 */
-		if (algo_id == IUS_N1_N1 ||
-		    algo_id == IUS_322 ||
-		    algo_id == IUS_522 ||
-		    algo_id == IUS_N11) {
-			algo_current = algo_group_1;
-			part_length = 3;
-		}
-		if (algo_id == SB_N1) {
-			algo_current = algo_group_2;
-			part_length = 2;
-		}
-		if (algo_id == SB3_N1 ||
-		    algo_id == SB3_32 ||
-		    algo_id == SB3_43 ||
-		    algo_id == SB3_54) {
-			algo_current = algo_group_3;
-			part_length = 2;
-		}
-		if (algo_id == BP_N1) {
-			algo_current = algo_group_4;
-			part_length = 2;
-		}
-		if (algo_id == IP_N1) {
-			algo_current = algo_group_5;
-			part_length = 2;
-		}
-		if (!algo_current)
-			goto incorrect_algo_id;
-
-		originator = -1;
-		for (i = 0; i < part_length; i ++ ) {
-			if (originator >= 0 && !strcmp(clk->name,
-						       algo_current[i]))
-				originator = i;
-			ck[i] = clk_get(NULL, algo_current[i]);
-			values[i] = clk_get_rate(ck[i]);
-		}
-
-		if (originator >= 0)
-			adjust_clocks(originator, adjust_algos[algo_id],
-				      values, part_length);
-
-		for (i = 0; i < part_length; i ++ ) {
-			struct frqcr_context part_ctx;
-			int part_div;
-
-			if (likely(!err)) {
-				part_div = sh7722_find_div_index(parent_rate,
-								rate);
-				if (part_div > 0) {
-					part_ctx = sh7722_get_clk_context(
-								ck[i]->name);
-					frqcr &= ~(part_ctx.mask <<
-						   part_ctx.shift);
-					frqcr |= part_div << part_ctx.shift;
-				} else
-					err = part_div;
-			}
-
-			ck[i]->ops->recalc(ck[i]);
-			clk_put(ck[i]);
-		}
-	}
-
-	/* was there any error during recalculation ? If so, bail out.. */
-	if (unlikely(err!=0))
-		goto out_err;
-
-	/* clear FRQCR bits */
-	frqcr &= ~(ctx.mask << ctx.shift);
-	frqcr |= div << ctx.shift;
-
-	/* ...and perform actual change */
-	ctrl_outl(frqcr, FRQCR);
-	return 0;
-
-incorrect_algo_id:
-	return -EINVAL;
-out_err:
-	return err;
-}
-
-static long sh7722_frqcr_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk->parent->rate;
-	int div;
-
-	/* look for multiplier/divisor pair */
-	div = sh7722_find_div_index(parent_rate, rate);
-	if (div < 0)
-		return clk->rate;
-
-	/* calculate new value of clock rate */
-	return parent_rate * 2 / divisors2[div];
-}
-
-static struct clk_ops sh7722_frqcr_clk_ops = {
-	.recalc = sh7722_frqcr_recalc,
-	.set_rate = sh7722_frqcr_set_rate,
-	.round_rate = sh7722_frqcr_round_rate,
+struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
 };
 
-/*
- * clock ops methods for SIU A/B and IrDA clock
- *
- */
-
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
-
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-	unsigned long r;
-	int div;
-
-	r = ctrl_inl(clk->arch_flags);
-	div = sh7722_find_div_index(clk->parent->rate, rate);
-	if (div < 0)
-		return div;
-	r = (r & ~0xF) | div;
-	ctrl_outl(r, clk->arch_flags);
-	return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-	unsigned long r;
-
-	r = ctrl_inl(clk->arch_flags);
-	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static int sh7722_siu_start_stop(struct clk *clk, int enable)
+/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
 {
-	unsigned long r;
+	unsigned long mult;
 
-	r = ctrl_inl(clk->arch_flags);
-	if (enable)
-		ctrl_outl(r & ~(1 << 8), clk->arch_flags);
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
 	else
-		ctrl_outl(r | (1 << 8), clk->arch_flags);
-	return 0;
-}
-
-static void sh7722_siu_enable(struct clk *clk)
-{
-	sh7722_siu_start_stop(clk, 1);
-}
+		mult = 0;
 
-static void sh7722_siu_disable(struct clk *clk)
-{
-	sh7722_siu_start_stop(clk, 0);
+	return clk->parent->rate * mult;
 }
 
-static struct clk_ops sh7722_siu_clk_ops = {
-	.recalc = sh7722_siu_recalc,
-	.set_rate = sh7722_siu_set_rate,
-	.enable = sh7722_siu_enable,
-	.disable = sh7722_siu_disable,
+static struct clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
 };
 
-#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
-
-static void sh7722_video_enable(struct clk *clk)
-{
-	unsigned long r;
-
-	r = ctrl_inl(VCLKCR);
-	ctrl_outl( r & ~(1<<8), VCLKCR);
-}
-
-static void sh7722_video_disable(struct clk *clk)
-{
-	unsigned long r;
-
-	r = ctrl_inl(VCLKCR);
-	ctrl_outl( r | (1<<8), VCLKCR);
-}
+static struct clk dll_clk = {
+	.name           = "dll_clk",
+	.id             = -1,
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
 
-static int sh7722_video_set_rate(struct clk *clk, unsigned long rate,
-				 int algo_id)
+static unsigned long pll_recalc(struct clk *clk)
 {
-	unsigned long r;
-
-	r = ctrl_inl(VCLKCR);
-	r &= ~0x3F;
-	r |= ((clk->parent->rate / rate - 1) & 0x3F);
-	ctrl_outl(r, VCLKCR);
-	return 0;
-}
+	unsigned long mult = 1;
+	unsigned long div = 1;
 
-static void sh7722_video_recalc(struct clk *clk)
-{
-	unsigned long r;
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
 
-	r = ctrl_inl(VCLKCR);
-	clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
+	return (clk->parent->rate * mult) / div;
 }
 
-static struct clk_ops sh7722_video_clk_ops = {
-	.recalc = sh7722_video_recalc,
-	.set_rate = sh7722_video_set_rate,
-	.enable = sh7722_video_enable,
-	.disable = sh7722_video_disable,
-};
-/*
- * and at last, clock definitions themselves
- */
-static struct clk sh7722_umem_clock = {
-	.name = "umem_clk",
-	.ops = &sh7722_frqcr_clk_ops,
-	.flags = CLK_RATE_PROPAGATES,
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
 };
 
-static struct clk sh7722_sh_clock = {
-	.name = "sh_clk",
-	.ops = &sh7722_frqcr_clk_ops,
-	.flags = CLK_RATE_PROPAGATES,
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
 };
 
-static struct clk sh7722_peripheral_clock = {
-	.name = "peripheral_clk",
-	.ops = &sh7722_frqcr_clk_ops,
-	.flags = CLK_RATE_PROPAGATES,
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
 };
 
-static struct clk sh7722_sdram_clock = {
-	.name = "sdram_clk",
-	.ops = &sh7722_frqcr_clk_ops,
-};
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
 
-static struct clk sh7722_r_clock = {
-	.name = "r_clk",
-	.rate = 32768,
-	.flags = CLK_RATE_PROPAGATES,
+static struct clk_div_mult_table div4_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
 };
 
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
-
-/*
- * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
- * methods of clk_ops determine which register they should access by
- * examining clk->name field
- */
-static struct clk sh7722_siu_a_clock = {
-	.name = "siu_a_clk",
-	.arch_flags = SCLKACR,
-	.ops = &sh7722_siu_clk_ops,
-};
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
 
-static struct clk sh7722_siu_b_clock = {
-	.name = "siu_b_clk",
-	.arch_flags = SCLKBCR,
-	.ops = &sh7722_siu_clk_ops,
-};
+#define DIV4(_str, _reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-static struct clk sh7722_irda_clock = {
-	.name = "irda_clk",
-	.arch_flags = IrDACLKCR,
-	.ops = &sh7722_siu_clk_ops,
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
+	[DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x1fff, 0),
 };
-#endif
-#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
-static struct clk sh7722_video_clock = {
-	.name = "video_clk",
-	.ops = &sh7722_video_clk_ops,
+struct clk div6_clks[] = {
+	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
 };
 
-#define MSTPCR_ARCH_FLAGS(reg, bit) (((reg) << 8) | (bit))
-#define MSTPCR_ARCH_FLAGS_REG(value) ((value) >> 8)
-#define MSTPCR_ARCH_FLAGS_BIT(value) ((value) & 0xff)
-
-static int sh7722_mstpcr_start_stop(struct clk *clk, int enable)
-{
-	unsigned long bit = MSTPCR_ARCH_FLAGS_BIT(clk->arch_flags);
-	unsigned long reg;
-	unsigned long r;
-
-	switch(MSTPCR_ARCH_FLAGS_REG(clk->arch_flags)) {
-	case 0:
-		reg = MSTPCR0;
-		break;
-	case 1:
-		reg = MSTPCR1;
-		break;
-	case 2:
-		reg = MSTPCR2;
-		break;
-	default:
-		return -EINVAL;
-	}  
-
-	r = ctrl_inl(reg);
-
-	if (enable)
-		r &= ~(1 << bit);
-	else
-		r |= (1 << bit);
+#define MSTP(_str, _parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
 
-	ctrl_outl(r, reg);
-	return 0;
-}
+static struct clk mstp_clks[] = {
+	MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
+	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
+	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
 
-static void sh7722_mstpcr_enable(struct clk *clk)
-{
-	sh7722_mstpcr_start_stop(clk, 1);
-}
+	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
+	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0),
 
-static void sh7722_mstpcr_disable(struct clk *clk)
-{
-	sh7722_mstpcr_start_stop(clk, 0);
-}
-
-static void sh7722_mstpcr_recalc(struct clk *clk)
-{
-	if (clk->parent)
-		clk->rate = clk->parent->rate;
-}
-
-static struct clk_ops sh7722_mstpcr_clk_ops = {
-	.enable = sh7722_mstpcr_enable,
-	.disable = sh7722_mstpcr_disable,
-	.recalc = sh7722_mstpcr_recalc,
-};
-
-#define MSTPCR(_name, _parent, regnr, bitnr) \
-{						\
-	.name = _name,				\
-	.arch_flags = MSTPCR_ARCH_FLAGS(regnr, bitnr),	\
-	.ops = (void *)_parent,		\
-}
-
-static struct clk sh7722_mstpcr_clocks[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	MSTPCR("uram0", "umem_clk", 0, 28),
-	MSTPCR("xymem0", "bus_clk", 0, 26),
-	MSTPCR("tmu0", "peripheral_clk", 0, 15),
-	MSTPCR("cmt0", "r_clk", 0, 14),
-	MSTPCR("rwdt0", "r_clk", 0, 13),
-	MSTPCR("flctl0", "peripheral_clk", 0, 10),
-	MSTPCR("scif0", "peripheral_clk", 0, 7),
-	MSTPCR("scif1", "peripheral_clk", 0, 6),
-	MSTPCR("scif2", "peripheral_clk", 0, 5),
-	MSTPCR("i2c0", "peripheral_clk", 1, 9),
-	MSTPCR("rtc0", "r_clk", 1, 8),
-	MSTPCR("sdhi0", "peripheral_clk", 2, 18),
-	MSTPCR("keysc0", "r_clk", 2, 14),
-	MSTPCR("usbf0", "peripheral_clk", 2, 11),
-	MSTPCR("2dg0", "bus_clk", 2, 9),
-	MSTPCR("siu0", "bus_clk", 2, 8),
-	MSTPCR("vou0", "bus_clk", 2, 5),
-	MSTPCR("jpu0", "bus_clk", 2, 6),
-	MSTPCR("beu0", "bus_clk", 2, 4),
-	MSTPCR("ceu0", "bus_clk", 2, 3),
-	MSTPCR("veu0", "bus_clk", 2, 2),
-	MSTPCR("vpu0", "bus_clk", 2, 1),
-	MSTPCR("lcdc0", "bus_clk", 2, 0),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7723)
-	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
-	MSTPCR("tlb0", "cpu_clk", 0, 31),
-	MSTPCR("ic0", "cpu_clk", 0, 30),
-	MSTPCR("oc0", "cpu_clk", 0, 29),
-	MSTPCR("l2c0", "sh_clk", 0, 28),
-	MSTPCR("ilmem0", "cpu_clk", 0, 27),
-	MSTPCR("fpu0", "cpu_clk", 0, 24),
-	MSTPCR("intc0", "cpu_clk", 0, 22),
-	MSTPCR("dmac0", "bus_clk", 0, 21),
-	MSTPCR("sh0", "sh_clk", 0, 20),
-	MSTPCR("hudi0", "peripheral_clk", 0, 19),
-	MSTPCR("ubc0", "cpu_clk", 0, 17),
-	MSTPCR("tmu0", "peripheral_clk", 0, 15),
-	MSTPCR("cmt0", "r_clk", 0, 14),
-	MSTPCR("rwdt0", "r_clk", 0, 13),
-	MSTPCR("dmac1", "bus_clk", 0, 12),
-	MSTPCR("tmu1", "peripheral_clk", 0, 11),
-	MSTPCR("flctl0", "peripheral_clk", 0, 10),
-	MSTPCR("scif0", "peripheral_clk", 0, 9),
-	MSTPCR("scif1", "peripheral_clk", 0, 8),
-	MSTPCR("scif2", "peripheral_clk", 0, 7),
-	MSTPCR("scif3", "bus_clk", 0, 6),
-	MSTPCR("scif4", "bus_clk", 0, 5),
-	MSTPCR("scif5", "bus_clk", 0, 4),
-	MSTPCR("msiof0", "bus_clk", 0, 2),
-	MSTPCR("msiof1", "bus_clk", 0, 1),
-	MSTPCR("meram0", "sh_clk", 0, 0),
-	MSTPCR("i2c0", "peripheral_clk", 1, 9),
-	MSTPCR("rtc0", "r_clk", 1, 8),
-	MSTPCR("atapi0", "sh_clk", 2, 28),
-	MSTPCR("adc0", "peripheral_clk", 2, 28),
-	MSTPCR("tpu0", "bus_clk", 2, 25),
-	MSTPCR("irda0", "peripheral_clk", 2, 24),
-	MSTPCR("tsif0", "bus_clk", 2, 22),
-	MSTPCR("icb0", "bus_clk", 2, 21),
-	MSTPCR("sdhi0", "bus_clk", 2, 18),
-	MSTPCR("sdhi1", "bus_clk", 2, 17),
-	MSTPCR("keysc0", "r_clk", 2, 14),
-	MSTPCR("usb0", "bus_clk", 2, 11),
-	MSTPCR("2dg0", "bus_clk", 2, 10),
-	MSTPCR("siu0", "bus_clk", 2, 8),
-	MSTPCR("veu1", "bus_clk", 2, 6),
-	MSTPCR("vou0", "bus_clk", 2, 5),
-	MSTPCR("beu0", "bus_clk", 2, 4),
-	MSTPCR("ceu0", "bus_clk", 2, 3),
-	MSTPCR("veu0", "bus_clk", 2, 2),
-	MSTPCR("vpu0", "bus_clk", 2, 1),
-	MSTPCR("lcdc0", "bus_clk", 2, 0),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7343)
-	MSTPCR("uram0", "umem_clk", 0, 28),
-	MSTPCR("xymem0", "bus_clk", 0, 26),
-	MSTPCR("tmu0", "peripheral_clk", 0, 15),
-	MSTPCR("cmt0", "r_clk", 0, 14),
-	MSTPCR("rwdt0", "r_clk", 0, 13),
-	MSTPCR("scif0", "peripheral_clk", 0, 7),
-	MSTPCR("scif1", "peripheral_clk", 0, 6),
-	MSTPCR("scif2", "peripheral_clk", 0, 5),
-	MSTPCR("scif3", "peripheral_clk", 0, 4),
-	MSTPCR("i2c0", "peripheral_clk", 1, 9),
-	MSTPCR("i2c1", "peripheral_clk", 1, 8),
-	MSTPCR("sdhi0", "peripheral_clk", 2, 18),
-	MSTPCR("keysc0", "r_clk", 2, 14),
-	MSTPCR("usbf0", "peripheral_clk", 2, 11),
-	MSTPCR("siu0", "bus_clk", 2, 8),
-	MSTPCR("jpu0", "bus_clk", 2, 6),
-	MSTPCR("vou0", "bus_clk", 2, 5),
-	MSTPCR("beu0", "bus_clk", 2, 4),
-	MSTPCR("ceu0", "bus_clk", 2, 3),
-	MSTPCR("veu0", "bus_clk", 2, 2),
-	MSTPCR("vpu0", "bus_clk", 2, 1),
-	MSTPCR("lcdc0", "bus_clk", 2, 0),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7366)
-	/* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
-	MSTPCR("tlb0", "cpu_clk", 0, 31),
-	MSTPCR("ic0", "cpu_clk", 0, 30),
-	MSTPCR("oc0", "cpu_clk", 0, 29),
-	MSTPCR("rsmem0", "sh_clk", 0, 28),
-	MSTPCR("xymem0", "cpu_clk", 0, 26),
-	MSTPCR("intc30", "peripheral_clk", 0, 23),
-	MSTPCR("intc0", "peripheral_clk", 0, 22),
-	MSTPCR("dmac0", "bus_clk", 0, 21),
-	MSTPCR("sh0", "sh_clk", 0, 20),
-	MSTPCR("hudi0", "peripheral_clk", 0, 19),
-	MSTPCR("ubc0", "cpu_clk", 0, 17),
-	MSTPCR("tmu0", "peripheral_clk", 0, 15),
-	MSTPCR("cmt0", "r_clk", 0, 14),
-	MSTPCR("rwdt0", "r_clk", 0, 13),
-	MSTPCR("flctl0", "peripheral_clk", 0, 10),
-	MSTPCR("scif0", "peripheral_clk", 0, 7),
-	MSTPCR("scif1", "bus_clk", 0, 6),
-	MSTPCR("scif2", "bus_clk", 0, 5),
-	MSTPCR("msiof0", "peripheral_clk", 0, 2),
-	MSTPCR("sbr0", "peripheral_clk", 0, 1),
-	MSTPCR("i2c0", "peripheral_clk", 1, 9),
-	MSTPCR("icb0", "bus_clk", 2, 27),
-	MSTPCR("meram0", "sh_clk", 2, 26),
-	MSTPCR("dacc0", "peripheral_clk", 2, 24),
-	MSTPCR("dacy0", "peripheral_clk", 2, 23),
-	MSTPCR("tsif0", "bus_clk", 2, 22),
-	MSTPCR("sdhi0", "bus_clk", 2, 18),
-	MSTPCR("mmcif0", "bus_clk", 2, 17),
-	MSTPCR("usb0", "bus_clk", 2, 11),
-	MSTPCR("siu0", "bus_clk", 2, 8),
-	MSTPCR("veu1", "bus_clk", 2, 7),
-	MSTPCR("vou0", "bus_clk", 2, 5),
-	MSTPCR("beu0", "bus_clk", 2, 4),
-	MSTPCR("ceu0", "bus_clk", 2, 3),
-	MSTPCR("veu0", "bus_clk", 2, 2),
-	MSTPCR("vpu0", "bus_clk", 2, 1),
-	MSTPCR("lcdc0", "bus_clk", 2, 0),
-#endif
-};
-
-static struct clk *sh7722_clocks[] = {
-	&sh7722_umem_clock,
-	&sh7722_sh_clock,
-	&sh7722_peripheral_clock,
-	&sh7722_sdram_clock,
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
-	&sh7722_siu_a_clock,
-	&sh7722_siu_b_clock,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	&sh7722_irda_clock,
-#endif
-#endif
-	&sh7722_video_clock,
+	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0),
+	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 9, 0),
+	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0),
+	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
+	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
 };
 
-/*
- * init in order: master, module, bus, cpu
- */
-struct clk_ops *onchip_ops[] = {
-	&sh7722_master_clk_ops,
-	&sh7722_module_clk_ops,
-	&sh7722_frqcr_clk_ops,
-	&sh7722_frqcr_clk_ops,
-};
-
-void __init
-arch_init_clk_ops(struct clk_ops **ops, int type)
-{
-	BUG_ON(type < 0 || type > ARRAY_SIZE(onchip_ops));
-	*ops = onchip_ops[type];
-}
-
 int __init arch_clk_init(void)
 {
-	struct clk *clk;
-	int i;
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
 
-	clk = clk_get(NULL, "master_clk");
-	for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) {
-		pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name);
-		sh7722_clocks[i]->parent = clk;
-		clk_register(sh7722_clocks[i]);
-	}
-	clk_put(clk);
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
 
-	clk_register(&sh7722_r_clock);
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
-	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr_clocks); i++) {
-		pr_debug( "Registering mstpcr clock '%s'\n",
-			  sh7722_mstpcr_clocks[i].name);
-		clk = clk_get(NULL, (void *) sh7722_mstpcr_clocks[i].ops);
-		sh7722_mstpcr_clocks[i].parent = clk;
-		sh7722_mstpcr_clocks[i].ops = &sh7722_mstpcr_clk_ops;
-		clk_register(&sh7722_mstpcr_clocks[i]);
-		clk_put(clk);
-	}
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
-	clk_recalc_rate(&sh7722_r_clock); /* make sure rate gets propagated */
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
-	return 0;
+	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
new file mode 100644
index 00000000000..e67c2678b8a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -0,0 +1,222 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+ *
+ * SH7723 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+/* SH7723 registers */
+#define FRQCR		0xa4150000
+#define VCLKCR		0xa4150004
+#define SCLKACR		0xa4150008
+#define SCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define DLLFRQ		0xa4150050
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.name           = "rclk",
+	.id             = -1,
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
+};
+
+/* The dll multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long dll_recalc(struct clk *clk)
+{
+	unsigned long mult;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(DLLFRQ);
+	else
+		mult = 0;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops dll_clk_ops = {
+	.recalc		= dll_recalc,
+};
+
+static struct clk dll_clk = {
+	.name           = "dll_clk",
+	.id             = -1,
+	.ops		= &dll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
+	else
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&dll_clk,
+	&pll_clk,
+};
+
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+static struct clk_div_mult_table div4_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
+       DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
+
+#define DIV4(_str, _reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x0dbf, 0),
+	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x0dbf, 0),
+	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x0dbf, 0),
+	[DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x0dbf, 0),
+};
+
+struct clk div6_clks[] = {
+	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
+  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+
+static struct clk mstp_clks[] = {
+	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
+	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
+	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
+	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
+	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 28, 1, 1, 0),
+	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
+	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
+	MSTP("intc0", &div4_clks[DIV4_I], MSTPCR0, 22, 1, 1, 0),
+	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
+	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
+	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
+	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
+	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
+	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
+	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
+	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
+	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 11, 0, 1, 0),
+	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
+	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
+	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
+	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
+	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
+	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
+	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
+	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
+	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
+	MSTP("meram0", &div4_clks[DIV4_SH], MSTPCR0, 0, 1, 1, 0),
+
+	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
+	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0, 0, 0),
+
+	MSTP("atapi0", &div4_clks[DIV4_SH], MSTPCR2, 28, 0, 1, 0),
+	MSTP("adc0", &div4_clks[DIV4_P], MSTPCR2, 27, 0, 1, 0),
+	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
+	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
+	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
+	MSTP("icb0", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
+	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
+	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
+	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0, 0, 0),
+	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 11, 0, 1, 0),
+	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 10, 0, 1, 1),
+	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0, 1, 0),
+	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
+	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
+	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
+	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
+	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
+	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
+	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or dll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &dll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+
+	return ret;
+}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
new file mode 100644
index 00000000000..5d5c9b95288
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -0,0 +1,242 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+ *
+ * SH7724 clock framework support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+/* SH7724 registers */
+#define FRQCRA		0xa4150000
+#define FRQCRB		0xa4150004
+#define VCLKCR		0xa4150048
+#define FCLKACR		0xa4150008
+#define FCLKBCR		0xa415000c
+#define IRDACLKCR	0xa4150018
+#define PLLCR		0xa4150024
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+#define SPUCLKCR	0xa415003c
+#define FLLFRQ		0xa4150050
+#define LSTATS		0xa4150060
+
+/* Fixed 32 KHz root clock for RTC and Power Management purposes */
+static struct clk r_clk = {
+	.name           = "rclk",
+	.id             = -1,
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
+};
+
+/* The fll multiplies the 32khz r_clk, may be used instead of extal */
+static unsigned long fll_recalc(struct clk *clk)
+{
+	unsigned long mult = 0;
+	unsigned long div = 1;
+
+	if (__raw_readl(PLLCR) & 0x1000)
+		mult = __raw_readl(FLLFRQ) & 0x3ff;
+
+	if (__raw_readl(FLLFRQ) & 0x4000)
+		div = 2;
+
+	return (clk->parent->rate * mult) / div;
+}
+
+static struct clk_ops fll_clk_ops = {
+	.recalc		= fll_recalc,
+};
+
+static struct clk fll_clk = {
+	.name           = "fll_clk",
+	.id             = -1,
+	.ops		= &fll_clk_ops,
+	.parent		= &r_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLCR) & 0x4000)
+		mult = (((__raw_readl(FRQCRA) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+/* A fixed divide-by-3 block use by the div6 clocks */
+static unsigned long div3_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 3;
+}
+
+static struct clk_ops div3_clk_ops = {
+	.recalc		= div3_recalc,
+};
+
+static struct clk div3_clk = {
+	.name		= "div3_clk",
+	.id		= -1,
+	.ops		= &div3_clk_ops,
+	.parent		= &pll_clk,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&fll_clk,
+	&pll_clk,
+	&div3_clk,
+};
+
+static int divisors[] = { 2, 0, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
+
+static struct clk_div_mult_table div4_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
+
+#define DIV4(_str, _reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4("cpu_clk", FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4("peripheral_clk", FRQCRA, 0, 0x2f7c, 0),
+	[DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, 0),
+};
+
+struct clk div6_clks[] = {
+	SH_CLK_DIV6("video_clk", &div3_clk, VCLKCR, 0),
+	SH_CLK_DIV6("fsia_clk", &div3_clk, FCLKACR, 0),
+	SH_CLK_DIV6("fsib_clk", &div3_clk, FCLKBCR, 0),
+	SH_CLK_DIV6("irda_clk", &div3_clk, IRDACLKCR, 0),
+	SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, 0),
+};
+
+#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
+  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+
+static struct clk mstp_clks[] = {
+	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
+	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
+	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
+	MSTP("rs0", &div4_clks[DIV4_B], MSTPCR0, 28, 1, 1, 0),
+	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
+	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 26, 1, 1, 0),
+	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
+	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 1, 1, 0),
+	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
+	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
+	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
+	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
+	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
+	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
+	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
+	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
+	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
+	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
+	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
+	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
+	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
+	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
+	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
+	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
+	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
+
+	MSTP("keysc0", &r_clk, MSTPCR1, 12, 0, 0, 0),
+	MSTP("rtc0", &r_clk, MSTPCR1, 11, 0, 0, 0),
+	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
+	MSTP("i2c1", &div4_clks[DIV4_P], MSTPCR1, 8, 0, 1, 0),
+
+	MSTP("mmc0", &div4_clks[DIV4_B], MSTPCR2, 29, 0, 1, 0),
+	MSTP("eth0", &div4_clks[DIV4_B], MSTPCR2, 28, 0, 1, 0),
+	MSTP("atapi0", &div4_clks[DIV4_B], MSTPCR2, 26, 0, 1, 0),
+	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
+	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
+	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
+	MSTP("usb1", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
+	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 20, 0, 1, 1),
+	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 19, 0, 1, 1),
+	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
+	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
+	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 15, 1, 1, 1),
+	MSTP("ceu1", &div4_clks[DIV4_B], MSTPCR2, 13, 0, 1, 1),
+	MSTP("beu1", &div4_clks[DIV4_B], MSTPCR2, 12, 0, 1, 1),
+	MSTP("2ddmac0", &div4_clks[DIV4_SH], MSTPCR2, 10, 0, 1, 1),
+	MSTP("spu0", &div4_clks[DIV4_B], MSTPCR2, 9, 0, 1, 0),
+	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
+	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
+	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
+	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
+	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
+	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
+	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	/* autodetect extal or fll configuration */
+	if (__raw_readl(PLLCR) & 0x1000)
+		pll_clk.parent = &fll_clk;
+	else
+		pll_clk.parent = &extal_clk;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+
+	return ret;
+}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 3177d0d1e06..370cd47642e 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -29,33 +29,28 @@ static struct clk_ops sh7763_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07);
-	clk->rate = clk->parent->rate / p0fc_divisors[idx];
+	return clk->parent->rate / p0fc_divisors[idx];
 }
 
 static struct clk_ops sh7763_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07);
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate / bfc_divisors[idx];
 }
 
 static struct clk_ops sh7763_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
-{
-	clk->rate = clk->parent->rate;
-}
-
 static struct clk_ops sh7763_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+	.recalc		= followparent_recalc,
 };
 
 static struct clk_ops *sh7763_clk_ops[] = {
@@ -71,10 +66,10 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 		*ops = sh7763_clk_ops[idx];
 }
 
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07);
-	clk->rate = clk->parent->rate / cfc_divisors[idx];
+	return clk->parent->rate / cfc_divisors[idx];
 }
 
 static struct clk_ops sh7763_shyway_clk_ops = {
@@ -83,7 +78,7 @@ static struct clk_ops sh7763_shyway_clk_ops = {
 
 static struct clk sh7763_shyway_clk = {
 	.name		= "shyway_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7763_shyway_clk_ops,
 };
 
@@ -95,31 +90,22 @@ static struct clk *sh7763_onchip_clocks[] = {
 	&sh7763_shyway_clk,
 };
 
-static int __init sh7763_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
+	struct clk *clk;
+	int i, ret = 0;
+
+	cpg_clk_init();
 
+	clk = clk_get(NULL, "master_clk");
 	for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
 		struct clk *clkp = sh7763_onchip_clocks[i];
 
 		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
+		ret |= clk_register(clkp);
 	}
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
-
 	clk_put(clk);
 
-	return 0;
+	return ret;
 }
-
-arch_initcall(sh7763_clk_init);
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
index 8e236062c72..e0b89676920 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -28,30 +28,30 @@ static struct clk_ops sh7770_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7770_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inl(FRQCR) & 0x000f);
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate / bfc_divisors[idx];
 }
 
 static struct clk_ops sh7770_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7770_cpu_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index 01f3da619d3..a249d823578 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -29,30 +29,30 @@ static struct clk_ops sh7780_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inl(FRQCR) & 0x0003);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7780_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate / bfc_divisors[idx];
 }
 
 static struct clk_ops sh7780_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7780_cpu_clk_ops = {
@@ -72,10 +72,10 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 		*ops = sh7780_clk_ops[idx];
 }
 
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
-	clk->rate = clk->parent->rate / cfc_divisors[idx];
+	return clk->parent->rate / cfc_divisors[idx];
 }
 
 static struct clk_ops sh7780_shyway_clk_ops = {
@@ -84,7 +84,7 @@ static struct clk_ops sh7780_shyway_clk_ops = {
 
 static struct clk sh7780_shyway_clk = {
 	.name		= "shyway_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7780_shyway_clk_ops,
 };
 
@@ -96,31 +96,22 @@ static struct clk *sh7780_onchip_clocks[] = {
 	&sh7780_shyway_clk,
 };
 
-static int __init sh7780_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
+	struct clk *clk;
+	int i, ret = 0;
 
+	cpg_clk_init();
+
+	clk = clk_get(NULL, "master_clk");
 	for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
 		struct clk *clkp = sh7780_onchip_clocks[i];
 
 		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
+		ret |= clk_register(clkp);
 	}
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
-
 	clk_put(clk);
 
-	return 0;
+	return ret;
 }
-
-arch_initcall(sh7780_clk_init);
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index 27fa81bef6a..73abfbf2f16 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -3,7 +3,7 @@
  *
  * SH7785 support for the clock framework
  *
- *  Copyright (C) 2007  Paul Mundt
+ *  Copyright (C) 2007 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -11,152 +11,116 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 2, 4, 6 };
-static int ufc_divisors[] = { 1, 1, 4, 6 };
-static int sfc_divisors[] = { 1, 1, 4, 6 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18,
-			     24, 32, 36, 48, 1, 1, 1, 1 };
-static int mfc_divisors[] = { 1, 1, 4, 6 };
-static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18,
-			      24, 32, 36, 48, 1, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
-}
+#include <cpu/sh7785.h>
 
-static struct clk_ops sh7785_master_clk_ops = {
-	.init		= master_clk_init,
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.name		= "extal",
+	.id		= -1,
+	.rate		= 33333333,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long pll_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(FRQMR1) & 0x000f);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
-}
+	int multiplier;
 
-static struct clk_ops sh7785_module_clk_ops = {
-	.recalc		= module_clk_recalc,
-};
+	multiplier = test_mode_pin(MODE_PIN4) ? 36 : 72;
 
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate * multiplier;
 }
 
-static struct clk_ops sh7785_bus_clk_ops = {
-	.recalc		= bus_clk_recalc,
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct clk_ops sh7785_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+static struct clk pll_clk = {
+	.name		= "pll_clk",
+	.id		= -1,
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
 };
 
-static struct clk_ops *sh7785_clk_ops[] = {
-	&sh7785_master_clk_ops,
-	&sh7785_module_clk_ops,
-	&sh7785_bus_clk_ops,
-	&sh7785_cpu_clk_ops,
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7785_clk_ops))
-		*ops = sh7785_clk_ops[idx];
-}
-
-static void shyway_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
-	clk->rate = clk->parent->rate / sfc_divisors[idx];
-}
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+			       24, 32, 36, 48 };
 
-static struct clk_ops sh7785_shyway_clk_ops = {
-	.recalc		= shyway_clk_recalc,
+static struct clk_div_mult_table div4_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
 };
 
-static struct clk sh7785_shyway_clk = {
-	.name		= "shyway_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
-	.ops		= &sh7785_shyway_clk_ops,
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
+	DIV4_DU, DIV4_P, DIV4_NR };
+
+#define DIV4(_str, _bit, _mask, _flags) \
+  SH_CLK_DIV4(_str, &pll_clk, FRQMR1, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_P] = DIV4("peripheral_clk", 0, 0x0f80, 0),
+	[DIV4_DU] = DIV4("du_clk", 4, 0x0ff0, 0),
+	[DIV4_GA] = DIV4("ga_clk", 8, 0x0030, 0),
+	[DIV4_DDR] = DIV4("ddr_clk", 12, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4("bus_clk", 16, 0x0fe0, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4("shyway_clk", 20, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4("umem_clk", 24, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4("cpu_clk", 28, 0x000e, CLK_ENABLE_ON_INIT),
 };
 
-static void ddr_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
-	clk->rate = clk->parent->rate / mfc_divisors[idx];
-}
-
-static struct clk_ops sh7785_ddr_clk_ops = {
-	.recalc		= ddr_clk_recalc,
-};
-
-static struct clk sh7785_ddr_clk = {
-	.name		= "ddr_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
-	.ops		= &sh7785_ddr_clk_ops,
-};
-
-static void ram_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 24) & 0x0003);
-	clk->rate = clk->parent->rate / ufc_divisors[idx];
-}
-
-static struct clk_ops sh7785_ram_clk_ops = {
-	.recalc		= ram_clk_recalc,
+#define MSTPCR0		0xffc80030
+#define MSTPCR1		0xffc80034
+
+static struct clk mstp_clks[] = {
+	/* MSTPCR0 */
+	SH_CLK_MSTP32("scif_fck", 5, &div4_clks[DIV4_P], MSTPCR0, 29, 0),
+	SH_CLK_MSTP32("scif_fck", 4, &div4_clks[DIV4_P], MSTPCR0, 28, 0),
+	SH_CLK_MSTP32("scif_fck", 3, &div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	SH_CLK_MSTP32("scif_fck", 2, &div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	SH_CLK_MSTP32("scif_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	SH_CLK_MSTP32("scif_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	SH_CLK_MSTP32("ssi_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	SH_CLK_MSTP32("ssi_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	SH_CLK_MSTP32("hac_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	SH_CLK_MSTP32("hac_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 16, 0),
+	SH_CLK_MSTP32("mmcif_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 13, 0),
+	SH_CLK_MSTP32("flctl_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 12, 0),
+	SH_CLK_MSTP32("tmu345_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	SH_CLK_MSTP32("tmu012_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	SH_CLK_MSTP32("siof_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	SH_CLK_MSTP32("hspi_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 2, 0),
+
+	/* MSTPCR1 */
+	SH_CLK_MSTP32("hudi_fck", -1, NULL, MSTPCR1, 19, 0),
+	SH_CLK_MSTP32("ubc_fck", -1, NULL, MSTPCR1, 17, 0),
+	SH_CLK_MSTP32("dmac_11_6_fck", -1, NULL, MSTPCR1, 5, 0),
+	SH_CLK_MSTP32("dmac_5_0_fck", -1, NULL, MSTPCR1, 4, 0),
+	SH_CLK_MSTP32("gdta_fck", -1, NULL, MSTPCR1, 0, 0),
 };
 
-static struct clk sh7785_ram_clk = {
-	.name		= "ram_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
-	.ops		= &sh7785_ram_clk_ops,
-};
-
-/*
- * Additional SH7785-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7785_onchip_clocks[] = {
-	&sh7785_shyway_clk,
-	&sh7785_ddr_clk,
-	&sh7785_ram_clk,
-};
-
-static int __init sh7785_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sh7785_onchip_clocks); i++) {
-		struct clk *clkp = sh7785_onchip_clocks[i];
-
-		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
-	}
+	int i, ret = 0;
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
 
-	clk_put(clk);
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
-	return 0;
+	return ret;
 }
-arch_initcall(sh7785_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index f84a9c13447..a0e8869071a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -36,30 +36,30 @@ static struct clk_ops sh7786_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inl(FRQMR1) & 0x000f);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops sh7786_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate / bfc_divisors[idx];
 }
 
 static struct clk_ops sh7786_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops sh7786_cpu_clk_ops = {
@@ -79,10 +79,10 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 		*ops = sh7786_clk_ops[idx];
 }
 
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
-	clk->rate = clk->parent->rate / sfc_divisors[idx];
+	return clk->parent->rate / sfc_divisors[idx];
 }
 
 static struct clk_ops sh7786_shyway_clk_ops = {
@@ -91,14 +91,14 @@ static struct clk_ops sh7786_shyway_clk_ops = {
 
 static struct clk sh7786_shyway_clk = {
 	.name		= "shyway_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7786_shyway_clk_ops,
 };
 
-static void ddr_clk_recalc(struct clk *clk)
+static unsigned long ddr_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
-	clk->rate = clk->parent->rate / mfc_divisors[idx];
+	return clk->parent->rate / mfc_divisors[idx];
 }
 
 static struct clk_ops sh7786_ddr_clk_ops = {
@@ -107,7 +107,7 @@ static struct clk_ops sh7786_ddr_clk_ops = {
 
 static struct clk sh7786_ddr_clk = {
 	.name		= "ddr_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7786_ddr_clk_ops,
 };
 
@@ -120,29 +120,22 @@ static struct clk *sh7786_onchip_clocks[] = {
 	&sh7786_ddr_clk,
 };
 
-static int __init sh7786_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
+	struct clk *clk;
+	int i, ret = 0;
 
+	cpg_clk_init();
+
+	clk = clk_get(NULL, "master_clk");
 	for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) {
 		struct clk *clkp = sh7786_onchip_clocks[i];
 
 		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
+		ret |= clk_register(clkp);
 	}
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
-
 	clk_put(clk);
 
-	return 0;
+	return ret;
 }
-arch_initcall(sh7786_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index c630b29e06a..23c27d32d98 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -40,30 +40,30 @@ static struct clk_ops shx3_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
-	clk->rate = clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate / pfc_divisors[idx];
 }
 
 static struct clk_ops shx3_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
+	return clk->parent->rate / bfc_divisors[idx];
 }
 
 static struct clk_ops shx3_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
+	return clk->parent->rate / ifc_divisors[idx];
 }
 
 static struct clk_ops shx3_cpu_clk_ops = {
@@ -83,10 +83,10 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 		*ops = shx3_clk_ops[idx];
 }
 
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
 {
 	int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
-	clk->rate = clk->parent->rate / cfc_divisors[idx];
+	return clk->parent->rate / cfc_divisors[idx];
 }
 
 static struct clk_ops shx3_shyway_clk_ops = {
@@ -95,7 +95,7 @@ static struct clk_ops shx3_shyway_clk_ops = {
 
 static struct clk shx3_shyway_clk = {
 	.name		= "shyway_clk",
-	.flags		= CLK_ALWAYS_ENABLED,
+	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &shx3_shyway_clk_ops,
 };
 
@@ -107,29 +107,22 @@ static struct clk *shx3_onchip_clocks[] = {
 	&shx3_shyway_clk,
 };
 
-static int __init shx3_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
+	struct clk *clk;
+	int i, ret = 0;
 
+	cpg_clk_init();
+
+	clk = clk_get(NULL, "master_clk");
 	for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
 		struct clk *clkp = shx3_onchip_clocks[i];
 
 		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
+		ret |= clk_register(clkp);
 	}
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
-
 	clk_put(clk);
 
-	return 0;
+	return ret;
 }
-arch_initcall(shx3_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
new file mode 100644
index 00000000000..1af0f958637
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
@@ -0,0 +1,2230 @@
+/*
+ * SH7724 Pinmux
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Pinmux
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7724.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+	PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+	PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+	PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+	PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+	PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+	PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+	PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+	PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+	PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+	PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+	PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+			      PTG5_DATA, PTG4_DATA,
+	PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+	PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+	PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+	PTJ7_DATA, PTJ6_DATA, PTJ5_DATA,
+	PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+	PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+	PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+	PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+	PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+	PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+	PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+	PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+	PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+	PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+	PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+	PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+	PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+		   PTS6_DATA, PTS5_DATA, PTS4_DATA,
+	PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+	PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
+	PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+	PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+	PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+	PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+	PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+	PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+	PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+	PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+	PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+	PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+	PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+	PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+	PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+	PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+	PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+	PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+	PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+	PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+	PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+	PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+	PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
+	PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+	PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
+	PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+	PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
+	PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+	PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+	PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
+	PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+	PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+	PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+	PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
+	PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+	PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+	PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+	PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN,
+	PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
+	PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+	PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+		 PTS6_IN, PTS5_IN, PTS4_IN,
+	PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+	PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
+	PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+	PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
+	PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+	PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
+	PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+	PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
+	PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+	PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
+	PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+	PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
+	PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
+	PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
+	PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PTA7_IN_PU, PTA6_IN_PU, PTA5_IN_PU, PTA4_IN_PU,
+	PTA3_IN_PU, PTA2_IN_PU, PTA1_IN_PU, PTA0_IN_PU,
+	PTB7_IN_PU, PTB6_IN_PU, PTB5_IN_PU, PTB4_IN_PU,
+	PTB3_IN_PU, PTB2_IN_PU, PTB1_IN_PU, PTB0_IN_PU,
+	PTC7_IN_PU, PTC6_IN_PU, PTC5_IN_PU, PTC4_IN_PU,
+	PTC3_IN_PU, PTC2_IN_PU, PTC1_IN_PU, PTC0_IN_PU,
+	PTD7_IN_PU, PTD6_IN_PU, PTD5_IN_PU, PTD4_IN_PU,
+	PTD3_IN_PU, PTD2_IN_PU, PTD1_IN_PU, PTD0_IN_PU,
+	PTE7_IN_PU, PTE6_IN_PU, PTE5_IN_PU, PTE4_IN_PU,
+	PTE3_IN_PU, PTE2_IN_PU, PTE1_IN_PU, PTE0_IN_PU,
+	PTF7_IN_PU, PTF6_IN_PU, PTF5_IN_PU, PTF4_IN_PU,
+	PTF3_IN_PU, PTF2_IN_PU, PTF1_IN_PU, PTF0_IN_PU,
+	PTH7_IN_PU, PTH6_IN_PU, PTH5_IN_PU, PTH4_IN_PU,
+	PTH3_IN_PU, PTH2_IN_PU, PTH1_IN_PU, PTH0_IN_PU,
+	PTJ3_IN_PU, PTJ2_IN_PU, PTJ1_IN_PU, PTJ0_IN_PU,
+	PTK7_IN_PU, PTK6_IN_PU, PTK5_IN_PU, PTK4_IN_PU,
+	PTK3_IN_PU, PTK2_IN_PU, PTK1_IN_PU, PTK0_IN_PU,
+	PTL7_IN_PU, PTL6_IN_PU, PTL5_IN_PU, PTL4_IN_PU,
+	PTL3_IN_PU, PTL2_IN_PU, PTL1_IN_PU, PTL0_IN_PU,
+	PTM7_IN_PU, PTM6_IN_PU, PTM5_IN_PU, PTM4_IN_PU,
+	PTM3_IN_PU, PTM2_IN_PU, PTM1_IN_PU, PTM0_IN_PU,
+	PTN7_IN_PU, PTN6_IN_PU, PTN5_IN_PU, PTN4_IN_PU,
+	PTN3_IN_PU, PTN2_IN_PU, PTN1_IN_PU, PTN0_IN_PU,
+	PTQ7_IN_PU, PTQ6_IN_PU, PTQ5_IN_PU, PTQ4_IN_PU,
+	PTQ3_IN_PU, PTQ2_IN_PU, PTQ1_IN_PU, PTQ0_IN_PU,
+	PTR7_IN_PU, PTR6_IN_PU, PTR5_IN_PU, PTR4_IN_PU,
+	PTR3_IN_PU, PTR2_IN_PU, PTR1_IN_PU, PTR0_IN_PU,
+		    PTS6_IN_PU, PTS5_IN_PU, PTS4_IN_PU,
+	PTS3_IN_PU, PTS2_IN_PU, PTS1_IN_PU, PTS0_IN_PU,
+	PTT7_IN_PU, PTT6_IN_PU, PTT5_IN_PU, PTT4_IN_PU,
+	PTT3_IN_PU, PTT2_IN_PU, PTT1_IN_PU, PTT0_IN_PU,
+	PTU7_IN_PU, PTU6_IN_PU, PTU5_IN_PU, PTU4_IN_PU,
+	PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU,
+	PTV7_IN_PU, PTV6_IN_PU, PTV5_IN_PU, PTV4_IN_PU,
+	PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU,
+	PTW7_IN_PU, PTW6_IN_PU, PTW5_IN_PU, PTW4_IN_PU,
+	PTW3_IN_PU, PTW2_IN_PU, PTW1_IN_PU, PTW0_IN_PU,
+	PTX7_IN_PU, PTX6_IN_PU, PTX5_IN_PU, PTX4_IN_PU,
+	PTX3_IN_PU, PTX2_IN_PU, PTX1_IN_PU, PTX0_IN_PU,
+	PTY7_IN_PU, PTY6_IN_PU, PTY5_IN_PU, PTY4_IN_PU,
+	PTY3_IN_PU, PTY2_IN_PU, PTY1_IN_PU, PTY0_IN_PU,
+	PTZ7_IN_PU, PTZ6_IN_PU, PTZ5_IN_PU, PTZ4_IN_PU,
+	PTZ3_IN_PU, PTZ2_IN_PU, PTZ1_IN_PU, PTZ0_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+	PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+	PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+	PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+	PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+	PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+	PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+	PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+	PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
+	PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+	PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
+	PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
+			    PTG5_OUT, PTG4_OUT,
+	PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+	PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+	PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+	PTJ7_OUT, PTJ6_OUT, PTJ5_OUT,
+	PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+	PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
+	PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+	PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+	PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+	PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
+	PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+	PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+	PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
+	PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
+	PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
+	PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+			    PTR1_OUT, PTR0_OUT,
+		  PTS6_OUT, PTS5_OUT, PTS4_OUT,
+	PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+	PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
+	PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+	PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
+	PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+	PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
+	PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+	PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
+	PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+	PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
+	PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+	PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
+	PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+	PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
+	PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+	PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+	PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+	PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+	PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+	PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+	PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+	PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+	PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
+	PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+	PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
+	PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+			  PTG5_FN, PTG4_FN,
+	PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+	PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
+	PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+	PTJ7_FN, PTJ6_FN, PTJ5_FN,
+	PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+	PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
+	PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+	PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
+	PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
+	PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
+	PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+	PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
+	PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
+	PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN,
+	PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
+	PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+	PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+		 PTS6_FN, PTS5_FN, PTS4_FN,
+	PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+	PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
+	PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+	PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
+	PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+	PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
+	PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+	PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
+	PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
+	PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
+	PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
+	PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
+	PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
+	PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
+	PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
+
+
+	PSA15_0, PSA15_1,
+	PSA14_0, PSA14_1,
+	PSA13_0, PSA13_1,
+	PSA12_0, PSA12_1,
+	PSA10_0, PSA10_1,
+	PSA9_0,  PSA9_1,
+	PSA8_0,  PSA8_1,
+	PSA7_0,  PSA7_1,
+	PSA6_0,  PSA6_1,
+	PSA5_0,  PSA5_1,
+	PSA3_0,  PSA3_1,
+	PSA2_0,  PSA2_1,
+	PSA1_0,  PSA1_1,
+	PSA0_0,  PSA0_1,
+
+	PSB14_0, PSB14_1,
+	PSB13_0, PSB13_1,
+	PSB12_0, PSB12_1,
+	PSB11_0, PSB11_1,
+	PSB10_0, PSB10_1,
+	PSB9_0,  PSB9_1,
+	PSB8_0,  PSB8_1,
+	PSB7_0,  PSB7_1,
+	PSB6_0,  PSB6_1,
+	PSB5_0,  PSB5_1,
+	PSB4_0,  PSB4_1,
+	PSB3_0,  PSB3_1,
+	PSB2_0,  PSB2_1,
+	PSB1_0,  PSB1_1,
+	PSB0_0,  PSB0_1,
+
+	PSC15_0, PSC15_1,
+	PSC14_0, PSC14_1,
+	PSC13_0, PSC13_1,
+	PSC12_0, PSC12_1,
+	PSC11_0, PSC11_1,
+	PSC10_0, PSC10_1,
+	PSC9_0,  PSC9_1,
+	PSC8_0,  PSC8_1,
+	PSC7_0,  PSC7_1,
+	PSC6_0,  PSC6_1,
+	PSC5_0,  PSC5_1,
+	PSC4_0,  PSC4_1,
+	PSC2_0,  PSC2_1,
+	PSC1_0,  PSC1_1,
+	PSC0_0,  PSC0_1,
+
+	PSD15_0, PSD15_1,
+	PSD14_0, PSD14_1,
+	PSD13_0, PSD13_1,
+	PSD12_0, PSD12_1,
+	PSD11_0, PSD11_1,
+	PSD10_0, PSD10_1,
+	PSD9_0,  PSD9_1,
+	PSD8_0,  PSD8_1,
+	PSD7_0,  PSD7_1,
+	PSD6_0,  PSD6_1,
+	PSD5_0,  PSD5_1,
+	PSD4_0,  PSD4_1,
+	PSD3_0,  PSD3_1,
+	PSD2_0,  PSD2_1,
+	PSD1_0,  PSD1_1,
+	PSD0_0,  PSD0_1,
+
+	PSE15_0, PSE15_1,
+	PSE14_0, PSE14_1,
+	PSE13_0, PSE13_1,
+	PSE12_0, PSE12_1,
+	PSE11_0, PSE11_1,
+	PSE10_0, PSE10_1,
+	PSE9_0,  PSE9_1,
+	PSE8_0,  PSE8_1,
+	PSE7_0,  PSE7_1,
+	PSE6_0,  PSE6_1,
+	PSE5_0,  PSE5_1,
+	PSE4_0,  PSE4_1,
+	PSE3_0,  PSE3_1,
+	PSE2_0,  PSE2_1,
+	PSE1_0,  PSE1_1,
+	PSE0_0,  PSE0_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/*PTA*/
+	D23_MARK,	KEYOUT2_MARK,		IDED15_MARK,
+	D22_MARK,	KEYOUT1_MARK,		IDED14_MARK,
+	D21_MARK,	KEYOUT0_MARK,		IDED13_MARK,
+	D20_MARK,	KEYIN4_MARK,		IDED12_MARK,
+	D19_MARK,	KEYIN3_MARK,		IDED11_MARK,
+	D18_MARK,	KEYIN2_MARK,		IDED10_MARK,
+	D17_MARK,	KEYIN1_MARK,		IDED9_MARK,
+	D16_MARK,	KEYIN0_MARK,		IDED8_MARK,
+
+	/*PTB*/
+	D31_MARK,	TPUTO1_MARK,		IDEA1_MARK,
+	D30_MARK,	TPUTO0_MARK,		IDEA0_MARK,
+	D29_MARK,				IODREQ_MARK,
+	D28_MARK,				IDECS0_MARK,
+	D27_MARK,				IDECS1_MARK,
+	D26_MARK,	KEYOUT5_IN5_MARK,	IDEIORD_MARK,
+	D25_MARK,	KEYOUT4_IN6_MARK,	IDEIOWR_MARK,
+	D24_MARK,	KEYOUT3_MARK,		IDEINT_MARK,
+
+	/*PTC*/
+	LCDD7_MARK,
+	LCDD6_MARK,
+	LCDD5_MARK,
+	LCDD4_MARK,
+	LCDD3_MARK,
+	LCDD2_MARK,
+	LCDD1_MARK,
+	LCDD0_MARK,
+
+	/*PTD*/
+	LCDD15_MARK,
+	LCDD14_MARK,
+	LCDD13_MARK,
+	LCDD12_MARK,
+	LCDD11_MARK,
+	LCDD10_MARK,
+	LCDD9_MARK,
+	LCDD8_MARK,
+
+	/*PTE*/
+	FSIMCKB_MARK,
+	FSIMCKA_MARK,
+	LCDD21_MARK,	SCIF2_L_TXD_MARK,
+	LCDD20_MARK,	SCIF4_SCK_MARK,
+	LCDD19_MARK,	SCIF4_RXD_MARK,
+	LCDD18_MARK,	SCIF4_TXD_MARK,
+	LCDD17_MARK,
+	LCDD16_MARK,
+
+	/*PTF*/
+	LCDVSYN_MARK,
+	LCDDISP_MARK,	LCDRS_MARK,
+	LCDHSYN_MARK,	LCDCS_MARK,
+	LCDDON_MARK,
+	LCDDCK_MARK,	LCDWR_MARK,
+	LCDVEPWC_MARK,	SCIF0_TXD_MARK,
+	LCDD23_MARK,	SCIF2_L_SCK_MARK,
+	LCDD22_MARK,	SCIF2_L_RXD_MARK,
+
+	/*PTG*/
+	AUDCK_MARK,
+	AUDSYNC_MARK,
+	AUDATA3_MARK,
+	AUDATA2_MARK,
+	AUDATA1_MARK,
+	AUDATA0_MARK,
+
+	/*PTH*/
+	VIO0_VD_MARK,
+	VIO0_CLK_MARK,
+	VIO0_D7_MARK,
+	VIO0_D6_MARK,
+	VIO0_D5_MARK,
+	VIO0_D4_MARK,
+	VIO0_D3_MARK,
+	VIO0_D2_MARK,
+
+	/*PTJ*/
+	PDSTATUS_MARK,
+	STATUS2_MARK,
+	STATUS0_MARK,
+	A25_MARK,		BS_MARK,
+	A24_MARK,
+	A23_MARK,
+	A22_MARK,
+
+	/*PTK*/
+	VIO1_D5_MARK,	VIO0_D13_MARK,	IDED5_MARK,
+	VIO1_D4_MARK,	VIO0_D12_MARK,	IDED4_MARK,
+	VIO1_D3_MARK,	VIO0_D11_MARK,	IDED3_MARK,
+	VIO1_D2_MARK,	VIO0_D10_MARK,	IDED2_MARK,
+	VIO1_D1_MARK,	VIO0_D9_MARK,	IDED1_MARK,
+	VIO1_D0_MARK,	VIO0_D8_MARK,	IDED0_MARK,
+	VIO0_FLD_MARK,
+	VIO0_HD_MARK,
+
+	/*PTL*/
+	DV_D5_MARK,	SCIF3_V_SCK_MARK,	RMII_RXD0_MARK,
+	DV_D4_MARK,	SCIF3_V_RXD_MARK,	RMII_RXD1_MARK,
+	DV_D3_MARK,	SCIF3_V_TXD_MARK,	RMII_REF_CLK_MARK,
+	DV_D2_MARK,	SCIF1_SCK_MARK,		RMII_TX_EN_MARK,
+	DV_D1_MARK,	SCIF1_RXD_MARK,		RMII_TXD0_MARK,
+	DV_D0_MARK,	SCIF1_TXD_MARK,		RMII_TXD1_MARK,
+	DV_D15_MARK,
+	DV_D14_MARK,	MSIOF0_MCK_MARK,
+
+	/*PTM*/
+	DV_D13_MARK,	MSIOF0_TSCK_MARK,
+	DV_D12_MARK,	MSIOF0_RXD_MARK,
+	DV_D11_MARK,	MSIOF0_TXD_MARK,
+	DV_D10_MARK,	MSIOF0_TSYNC_MARK,
+	DV_D9_MARK,	MSIOF0_SS1_MARK,	MSIOF0_RSCK_MARK,
+	DV_D8_MARK,	MSIOF0_SS2_MARK,	MSIOF0_RSYNC_MARK,
+	LCDVCPWC_MARK,	SCIF0_RXD_MARK,
+	LCDRD_MARK,	SCIF0_SCK_MARK,
+
+	/*PTN*/
+	VIO0_D1_MARK,
+	VIO0_D0_MARK,
+	DV_CLKI_MARK,
+	DV_CLK_MARK,	SCIF2_V_SCK_MARK,
+	DV_VSYNC_MARK,	SCIF2_V_RXD_MARK,
+	DV_HSYNC_MARK,	SCIF2_V_TXD_MARK,
+	DV_D7_MARK,	SCIF3_V_CTS_MARK,	RMII_RX_ER_MARK,
+	DV_D6_MARK,	SCIF3_V_RTS_MARK,	RMII_CRS_DV_MARK,
+
+	/*PTQ*/
+	D7_MARK,
+	D6_MARK,
+	D5_MARK,
+	D4_MARK,
+	D3_MARK,
+	D2_MARK,
+	D1_MARK,
+	D0_MARK,
+
+	/*PTR*/
+	CS6B_CE1B_MARK,
+	CS6A_CE2B_MARK,
+	CS5B_CE1A_MARK,
+	CS5A_CE2A_MARK,
+	IOIS16_MARK,		LCDLCLK_MARK,
+	WAIT_MARK,
+	WE3_ICIOWR_MARK,	TPUTO3_MARK,	TPUTI3_MARK,
+	WE2_ICIORD_MARK,	TPUTO2_MARK,	IDEA2_MARK,
+
+	/*PTS*/
+	VIO_CKO_MARK,
+	VIO1_FLD_MARK,	TPUTI2_MARK,		IDEIORDY_MARK,
+	VIO1_HD_MARK,	SCIF5_SCK_MARK,
+	VIO1_VD_MARK,	SCIF5_RXD_MARK,
+	VIO1_CLK_MARK,	SCIF5_TXD_MARK,
+	VIO1_D7_MARK,	VIO0_D15_MARK,		IDED7_MARK,
+	VIO1_D6_MARK,	VIO0_D14_MARK,		IDED6_MARK,
+
+	/*PTT*/
+	D15_MARK,
+	D14_MARK,
+	D13_MARK,
+	D12_MARK,
+	D11_MARK,
+	D10_MARK,
+	D9_MARK,
+	D8_MARK,
+
+	/*PTU*/
+	DMAC_DACK0_MARK,
+	DMAC_DREQ0_MARK,
+	FSIOASD_MARK,
+	FSIIABCK_MARK,
+	FSIIALRCK_MARK,
+	FSIOABCK_MARK,
+	FSIOALRCK_MARK,
+	CLKAUDIOAO_MARK,
+
+	/*PTV*/
+	FSIIBSD_MARK,		MSIOF1_SS2_MARK,	MSIOF1_RSYNC_MARK,
+	FSIOBSD_MARK,		MSIOF1_SS1_MARK,	MSIOF1_RSCK_MARK,
+	FSIIBBCK_MARK,		MSIOF1_RXD_MARK,
+	FSIIBLRCK_MARK,		MSIOF1_TSYNC_MARK,
+	FSIOBBCK_MARK,		MSIOF1_TSCK_MARK,
+	FSIOBLRCK_MARK,		MSIOF1_TXD_MARK,
+	CLKAUDIOBO_MARK,	MSIOF1_MCK_MARK,
+	FSIIASD_MARK,
+
+	/*PTW*/
+	MMC_D7_MARK,		SDHI1CD_MARK,		IODACK_MARK,
+	MMC_D6_MARK,		SDHI1WP_MARK,		IDERST_MARK,
+	MMC_D5_MARK,		SDHI1D3_MARK,		EXBUF_ENB_MARK,
+	MMC_D4_MARK,		SDHI1D2_MARK,		DIRECTION_MARK,
+	MMC_D3_MARK,		SDHI1D1_MARK,
+	MMC_D2_MARK,		SDHI1D0_MARK,
+	MMC_D1_MARK,		SDHI1CMD_MARK,
+	MMC_D0_MARK,		SDHI1CLK_MARK,
+
+	/*PTX*/
+	DMAC_DACK1_MARK,	IRDA_OUT_MARK,
+	DMAC_DREQ1_MARK,	IRDA_IN_MARK,
+	TSIF_TS0_SDAT_MARK,				LNKSTA_MARK,
+	TSIF_TS0_SCK_MARK,				MDIO_MARK,
+	TSIF_TS0_SDEN_MARK,				MDC_MARK,
+	TSIF_TS0_SPSYNC_MARK,
+	MMC_CLK_MARK,
+	MMC_CMD_MARK,
+
+	/*PTY*/
+	SDHI0CD_MARK,
+	SDHI0WP_MARK,
+	SDHI0D3_MARK,
+	SDHI0D2_MARK,
+	SDHI0D1_MARK,
+	SDHI0D0_MARK,
+	SDHI0CMD_MARK,
+	SDHI0CLK_MARK,
+
+	/*PTZ*/
+	INTC_IRQ7_MARK,		SCIF3_I_CTS_MARK,
+	INTC_IRQ6_MARK,		SCIF3_I_RTS_MARK,
+	INTC_IRQ5_MARK,		SCIF3_I_SCK_MARK,
+	INTC_IRQ4_MARK,		SCIF3_I_RXD_MARK,
+	INTC_IRQ3_MARK,		SCIF3_I_TXD_MARK,
+	INTC_IRQ2_MARK,
+	INTC_IRQ1_MARK,
+	INTC_IRQ0_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	/* PTA GPIO */
+	PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT, PTA7_IN_PU),
+	PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT, PTA6_IN_PU),
+	PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT, PTA5_IN_PU),
+	PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT, PTA4_IN_PU),
+	PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT, PTA3_IN_PU),
+	PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT, PTA2_IN_PU),
+	PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT, PTA1_IN_PU),
+	PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT, PTA0_IN_PU),
+
+	/* PTB GPIO */
+	PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT, PTB7_IN_PU),
+	PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT, PTB6_IN_PU),
+	PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT, PTB5_IN_PU),
+	PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT, PTB4_IN_PU),
+	PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT, PTB3_IN_PU),
+	PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT, PTB2_IN_PU),
+	PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT, PTB1_IN_PU),
+	PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT, PTB0_IN_PU),
+
+	/* PTC GPIO */
+	PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT, PTC7_IN_PU),
+	PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT, PTC6_IN_PU),
+	PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT, PTC5_IN_PU),
+	PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT, PTC4_IN_PU),
+	PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT, PTC3_IN_PU),
+	PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT, PTC2_IN_PU),
+	PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT, PTC1_IN_PU),
+	PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT, PTC0_IN_PU),
+
+	/* PTD GPIO */
+	PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT, PTD7_IN_PU),
+	PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT, PTD6_IN_PU),
+	PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT, PTD5_IN_PU),
+	PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT, PTD4_IN_PU),
+	PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT, PTD3_IN_PU),
+	PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT, PTD2_IN_PU),
+	PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT, PTD1_IN_PU),
+	PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT, PTD0_IN_PU),
+
+	/* PTE GPIO */
+	PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT, PTE7_IN_PU),
+	PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT, PTE6_IN_PU),
+	PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT, PTE5_IN_PU),
+	PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT, PTE4_IN_PU),
+	PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT, PTE3_IN_PU),
+	PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT, PTE2_IN_PU),
+	PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT, PTE1_IN_PU),
+	PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT, PTE0_IN_PU),
+
+	/* PTF GPIO */
+	PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT, PTF7_IN_PU),
+	PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT, PTF6_IN_PU),
+	PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT, PTF5_IN_PU),
+	PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT, PTF4_IN_PU),
+	PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT, PTF3_IN_PU),
+	PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT, PTF2_IN_PU),
+	PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT, PTF1_IN_PU),
+	PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT, PTF0_IN_PU),
+
+	/* PTG GPIO */
+	PINMUX_DATA(PTG5_DATA, PTG5_OUT),
+	PINMUX_DATA(PTG4_DATA, PTG4_OUT),
+	PINMUX_DATA(PTG3_DATA, PTG3_OUT),
+	PINMUX_DATA(PTG2_DATA, PTG2_OUT),
+	PINMUX_DATA(PTG1_DATA, PTG1_OUT),
+	PINMUX_DATA(PTG0_DATA, PTG0_OUT),
+
+	/* PTH GPIO */
+	PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT, PTH7_IN_PU),
+	PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT, PTH6_IN_PU),
+	PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT, PTH5_IN_PU),
+	PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT, PTH4_IN_PU),
+	PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT, PTH3_IN_PU),
+	PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT, PTH2_IN_PU),
+	PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT, PTH1_IN_PU),
+	PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT, PTH0_IN_PU),
+
+	/* PTJ GPIO */
+	PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
+	PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
+	PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
+	PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT, PTJ3_IN_PU),
+	PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT, PTJ2_IN_PU),
+	PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT, PTJ1_IN_PU),
+	PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT, PTJ0_IN_PU),
+
+	/* PTK GPIO */
+	PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT, PTK7_IN_PU),
+	PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT, PTK6_IN_PU),
+	PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT, PTK5_IN_PU),
+	PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT, PTK4_IN_PU),
+	PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT, PTK3_IN_PU),
+	PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT, PTK2_IN_PU),
+	PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT, PTK1_IN_PU),
+	PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT, PTK0_IN_PU),
+
+	/* PTL GPIO */
+	PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT, PTL7_IN_PU),
+	PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT, PTL6_IN_PU),
+	PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT, PTL5_IN_PU),
+	PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT, PTL4_IN_PU),
+	PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT, PTL3_IN_PU),
+	PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT, PTL2_IN_PU),
+	PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT, PTL1_IN_PU),
+	PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT, PTL0_IN_PU),
+
+	/* PTM GPIO */
+	PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT, PTM7_IN_PU),
+	PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT, PTM6_IN_PU),
+	PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT, PTM5_IN_PU),
+	PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT, PTM4_IN_PU),
+	PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT, PTM3_IN_PU),
+	PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT, PTM2_IN_PU),
+	PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT, PTM1_IN_PU),
+	PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT, PTM0_IN_PU),
+
+	/* PTN GPIO */
+	PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT, PTN7_IN_PU),
+	PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT, PTN6_IN_PU),
+	PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT, PTN5_IN_PU),
+	PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT, PTN4_IN_PU),
+	PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT, PTN3_IN_PU),
+	PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT, PTN2_IN_PU),
+	PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT, PTN1_IN_PU),
+	PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT, PTN0_IN_PU),
+
+	/* PTQ GPIO */
+	PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT, PTQ7_IN_PU),
+	PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT, PTQ6_IN_PU),
+	PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT, PTQ5_IN_PU),
+	PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT, PTQ4_IN_PU),
+	PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT, PTQ3_IN_PU),
+	PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT, PTQ2_IN_PU),
+	PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT, PTQ1_IN_PU),
+	PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT, PTQ0_IN_PU),
+
+	/* PTR GPIO */
+	PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT, PTR7_IN_PU),
+	PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT, PTR6_IN_PU),
+	PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT, PTR5_IN_PU),
+	PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT, PTR4_IN_PU),
+	PINMUX_DATA(PTR3_DATA, PTR3_IN,           PTR3_IN_PU),
+	PINMUX_DATA(PTR2_DATA, PTR2_IN,           PTR2_IN_PU),
+	PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT, PTR1_IN_PU),
+	PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT, PTR0_IN_PU),
+
+	/* PTS GPIO */
+	PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT, PTS6_IN_PU),
+	PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT, PTS5_IN_PU),
+	PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT, PTS4_IN_PU),
+	PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT, PTS3_IN_PU),
+	PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT, PTS2_IN_PU),
+	PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT, PTS1_IN_PU),
+	PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT, PTS0_IN_PU),
+
+	/* PTT GPIO */
+	PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT, PTT7_IN_PU),
+	PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT, PTT6_IN_PU),
+	PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT, PTT5_IN_PU),
+	PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT, PTT4_IN_PU),
+	PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT, PTT3_IN_PU),
+	PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT, PTT2_IN_PU),
+	PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT, PTT1_IN_PU),
+	PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT, PTT0_IN_PU),
+
+	/* PTU GPIO */
+	PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT, PTU7_IN_PU),
+	PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT, PTU6_IN_PU),
+	PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT, PTU5_IN_PU),
+	PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT, PTU4_IN_PU),
+	PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT, PTU3_IN_PU),
+	PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT, PTU2_IN_PU),
+	PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT, PTU1_IN_PU),
+	PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT, PTU0_IN_PU),
+
+	/* PTV GPIO */
+	PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT, PTV7_IN_PU),
+	PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT, PTV6_IN_PU),
+	PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT, PTV5_IN_PU),
+	PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT, PTV4_IN_PU),
+	PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT, PTV3_IN_PU),
+	PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT, PTV2_IN_PU),
+	PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT, PTV1_IN_PU),
+	PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT, PTV0_IN_PU),
+
+	/* PTW GPIO */
+	PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT, PTW7_IN_PU),
+	PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT, PTW6_IN_PU),
+	PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT, PTW5_IN_PU),
+	PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT, PTW4_IN_PU),
+	PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT, PTW3_IN_PU),
+	PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT, PTW2_IN_PU),
+	PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT, PTW1_IN_PU),
+	PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT, PTW0_IN_PU),
+
+	/* PTX GPIO */
+	PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT, PTX7_IN_PU),
+	PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT, PTX6_IN_PU),
+	PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT, PTX5_IN_PU),
+	PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT, PTX4_IN_PU),
+	PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT, PTX3_IN_PU),
+	PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT, PTX2_IN_PU),
+	PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT, PTX1_IN_PU),
+	PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT, PTX0_IN_PU),
+
+	/* PTY GPIO */
+	PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT, PTY7_IN_PU),
+	PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT, PTY6_IN_PU),
+	PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT, PTY5_IN_PU),
+	PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT, PTY4_IN_PU),
+	PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT, PTY3_IN_PU),
+	PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT, PTY2_IN_PU),
+	PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT, PTY1_IN_PU),
+	PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT, PTY0_IN_PU),
+
+	/* PTZ GPIO */
+	PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT, PTZ7_IN_PU),
+	PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT, PTZ6_IN_PU),
+	PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT, PTZ5_IN_PU),
+	PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT, PTZ4_IN_PU),
+	PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT, PTZ3_IN_PU),
+	PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT, PTZ2_IN_PU),
+	PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT, PTZ1_IN_PU),
+	PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT, PTZ0_IN_PU),
+
+	/* PTA FN */
+	PINMUX_DATA(D23_MARK,	PSA15_0, PSA14_0, PTA7_FN),
+	PINMUX_DATA(D22_MARK,	PSA15_0, PSA14_0, PTA6_FN),
+	PINMUX_DATA(D21_MARK,	PSA15_0, PSA14_0, PTA5_FN),
+	PINMUX_DATA(D20_MARK,	PSA15_0, PSA14_0, PTA4_FN),
+	PINMUX_DATA(D19_MARK,	PSA15_0, PSA14_0, PTA3_FN),
+	PINMUX_DATA(D18_MARK,	PSA15_0, PSA14_0, PTA2_FN),
+	PINMUX_DATA(D17_MARK,	PSA15_0, PSA14_0, PTA1_FN),
+	PINMUX_DATA(D16_MARK,	PSA15_0, PSA14_0, PTA0_FN),
+
+	PINMUX_DATA(KEYOUT2_MARK,	PSA15_0, PSA14_1, PTA7_FN),
+	PINMUX_DATA(KEYOUT1_MARK,	PSA15_0, PSA14_1, PTA6_FN),
+	PINMUX_DATA(KEYOUT0_MARK,	PSA15_0, PSA14_1, PTA5_FN),
+	PINMUX_DATA(KEYIN4_MARK,	PSA15_0, PSA14_1, PTA4_FN),
+	PINMUX_DATA(KEYIN3_MARK,	PSA15_0, PSA14_1, PTA3_FN),
+	PINMUX_DATA(KEYIN2_MARK,	PSA15_0, PSA14_1, PTA2_FN),
+	PINMUX_DATA(KEYIN1_MARK,	PSA15_0, PSA14_1, PTA1_FN),
+	PINMUX_DATA(KEYIN0_MARK,	PSA15_0, PSA14_1, PTA0_FN),
+
+	PINMUX_DATA(IDED15_MARK,	PSA15_1, PSA14_0, PTA7_FN),
+	PINMUX_DATA(IDED14_MARK,	PSA15_1, PSA14_0, PTA6_FN),
+	PINMUX_DATA(IDED13_MARK,	PSA15_1, PSA14_0, PTA5_FN),
+	PINMUX_DATA(IDED12_MARK,	PSA15_1, PSA14_0, PTA4_FN),
+	PINMUX_DATA(IDED11_MARK,	PSA15_1, PSA14_0, PTA3_FN),
+	PINMUX_DATA(IDED10_MARK,	PSA15_1, PSA14_0, PTA2_FN),
+	PINMUX_DATA(IDED9_MARK,		PSA15_1, PSA14_0, PTA1_FN),
+	PINMUX_DATA(IDED8_MARK,		PSA15_1, PSA14_0, PTA0_FN),
+
+	/* PTB FN */
+	PINMUX_DATA(D31_MARK,		PSE15_0, PSE14_0, PTB7_FN),
+	PINMUX_DATA(D30_MARK,		PSE15_0, PSE14_0, PTB6_FN),
+	PINMUX_DATA(D29_MARK,		PSE11_0,          PTB5_FN),
+	PINMUX_DATA(D28_MARK,		PSE11_0,          PTB4_FN),
+	PINMUX_DATA(D27_MARK,		PSE11_0,          PTB3_FN),
+	PINMUX_DATA(D26_MARK,		PSA15_0, PSA14_0, PTB2_FN),
+	PINMUX_DATA(D25_MARK,		PSA15_0, PSA14_0, PTB1_FN),
+	PINMUX_DATA(D24_MARK,		PSA15_0, PSA14_0, PTB0_FN),
+
+	PINMUX_DATA(IDEA1_MARK,		PSE15_1, PSE14_0, PTB7_FN),
+	PINMUX_DATA(IDEA0_MARK,		PSE15_1, PSE14_0, PTB6_FN),
+	PINMUX_DATA(IODREQ_MARK,	PSE11_1,          PTB5_FN),
+	PINMUX_DATA(IDECS0_MARK,	PSE11_1,          PTB4_FN),
+	PINMUX_DATA(IDECS1_MARK,	PSE11_1,          PTB3_FN),
+	PINMUX_DATA(IDEIORD_MARK,	PSA15_1, PSA14_0, PTB2_FN),
+	PINMUX_DATA(IDEIOWR_MARK,	PSA15_1, PSA14_0, PTB1_FN),
+	PINMUX_DATA(IDEINT_MARK,	PSA15_1, PSA14_0, PTB0_FN),
+
+	PINMUX_DATA(TPUTO1_MARK,	PSE15_0, PSE14_1, PTB7_FN),
+	PINMUX_DATA(TPUTO0_MARK,	PSE15_0, PSE14_1, PTB6_FN),
+
+	PINMUX_DATA(KEYOUT5_IN5_MARK,	PSA15_0, PSA14_1, PTB2_FN),
+	PINMUX_DATA(KEYOUT4_IN6_MARK,	PSA15_0, PSA14_1, PTB1_FN),
+	PINMUX_DATA(KEYOUT3_MARK,	PSA15_0, PSA14_1, PTB0_FN),
+
+	/* PTC FN */
+	PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN),
+	PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN),
+	PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN),
+	PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN),
+	PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN),
+	PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN),
+	PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN),
+	PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN),
+
+	/* PTD FN */
+	PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN),
+	PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN),
+	PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN),
+	PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN),
+	PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN),
+	PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN),
+	PINMUX_DATA(LCDD9_MARK,  PSD5_0, PTD1_FN),
+	PINMUX_DATA(LCDD8_MARK,  PSD5_0, PTD0_FN),
+
+	/* PTE FN */
+	PINMUX_DATA(FSIMCKB_MARK, PTE7_FN),
+	PINMUX_DATA(FSIMCKA_MARK, PTE6_FN),
+
+	PINMUX_DATA(LCDD21_MARK,	PSC5_0, PSC4_0, PTE5_FN),
+	PINMUX_DATA(LCDD20_MARK,	PSD3_0, PSD2_0, PTE4_FN),
+	PINMUX_DATA(LCDD19_MARK,	PSA3_0, PSA2_0, PTE3_FN),
+	PINMUX_DATA(LCDD18_MARK,	PSA3_0, PSA2_0, PTE2_FN),
+	PINMUX_DATA(LCDD17_MARK,	PSD5_0,         PTE1_FN),
+	PINMUX_DATA(LCDD16_MARK,	PSD5_0,         PTE0_FN),
+
+	PINMUX_DATA(SCIF2_L_TXD_MARK,	PSC5_0, PSC4_1, PTE5_FN),
+	PINMUX_DATA(SCIF4_SCK_MARK,	PSD3_0, PSD2_1, PTE4_FN),
+	PINMUX_DATA(SCIF4_RXD_MARK,	PSA3_0, PSA2_1, PTE3_FN),
+	PINMUX_DATA(SCIF4_TXD_MARK,	PSA3_0, PSA2_1, PTE2_FN),
+
+	/* PTF FN */
+	PINMUX_DATA(LCDVSYN_MARK,	PSD8_0,          PTF7_FN),
+	PINMUX_DATA(LCDDISP_MARK,	PSD10_0, PSD9_0, PTF6_FN),
+	PINMUX_DATA(LCDHSYN_MARK,	PSD10_0, PSD9_0, PTF5_FN),
+	PINMUX_DATA(LCDDON_MARK,	PSD8_0,          PTF4_FN),
+	PINMUX_DATA(LCDDCK_MARK,	PSD10_0, PSD9_0, PTF3_FN),
+	PINMUX_DATA(LCDVEPWC_MARK,	PSA6_0,          PTF2_FN),
+	PINMUX_DATA(LCDD23_MARK,	PSC7_0,  PSC6_0, PTF1_FN),
+	PINMUX_DATA(LCDD22_MARK,	PSC5_0,  PSC4_0, PTF0_FN),
+
+	PINMUX_DATA(LCDRS_MARK,		PSD10_0, PSD9_1, PTF6_FN),
+	PINMUX_DATA(LCDCS_MARK,		PSD10_0, PSD9_1, PTF5_FN),
+	PINMUX_DATA(LCDWR_MARK,		PSD10_0, PSD9_1, PTF3_FN),
+
+	PINMUX_DATA(SCIF0_TXD_MARK,	PSA6_1,          PTF2_FN),
+	PINMUX_DATA(SCIF2_L_SCK_MARK,	PSC7_0,  PSC6_1, PTF1_FN),
+	PINMUX_DATA(SCIF2_L_RXD_MARK,	PSC5_0,  PSC4_1, PTF0_FN),
+
+	/* PTG FN */
+	PINMUX_DATA(AUDCK_MARK,   PTG5_FN),
+	PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
+	PINMUX_DATA(AUDATA3_MARK, PTG3_FN),
+	PINMUX_DATA(AUDATA2_MARK, PTG2_FN),
+	PINMUX_DATA(AUDATA1_MARK, PTG1_FN),
+	PINMUX_DATA(AUDATA0_MARK, PTG0_FN),
+
+	/* PTH FN */
+	PINMUX_DATA(VIO0_VD_MARK,  PTH7_FN),
+	PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN),
+	PINMUX_DATA(VIO0_D7_MARK,  PTH5_FN),
+	PINMUX_DATA(VIO0_D6_MARK,  PTH4_FN),
+	PINMUX_DATA(VIO0_D5_MARK,  PTH3_FN),
+	PINMUX_DATA(VIO0_D4_MARK,  PTH2_FN),
+	PINMUX_DATA(VIO0_D3_MARK,  PTH1_FN),
+	PINMUX_DATA(VIO0_D2_MARK,  PTH0_FN),
+
+	/* PTJ FN */
+	PINMUX_DATA(PDSTATUS_MARK,	PTJ7_FN),
+	PINMUX_DATA(STATUS2_MARK,	PTJ6_FN),
+	PINMUX_DATA(STATUS0_MARK,	PTJ5_FN),
+	PINMUX_DATA(A25_MARK,		PSA8_0, PTJ3_FN),
+	PINMUX_DATA(BS_MARK,		PSA8_1, PTJ3_FN),
+	PINMUX_DATA(A24_MARK,		PTJ2_FN),
+	PINMUX_DATA(A23_MARK,		PTJ1_FN),
+	PINMUX_DATA(A22_MARK,		PTJ0_FN),
+
+	/* PTK FN */
+	PINMUX_DATA(VIO1_D5_MARK,	PSB7_0, PSB6_0, PTK7_FN),
+	PINMUX_DATA(VIO1_D4_MARK,	PSB7_0, PSB6_0, PTK6_FN),
+	PINMUX_DATA(VIO1_D3_MARK,	PSB7_0, PSB6_0, PTK5_FN),
+	PINMUX_DATA(VIO1_D2_MARK,	PSB7_0, PSB6_0, PTK4_FN),
+	PINMUX_DATA(VIO1_D1_MARK,	PSB7_0, PSB6_0, PTK3_FN),
+	PINMUX_DATA(VIO1_D0_MARK,	PSB7_0, PSB6_0, PTK2_FN),
+
+	PINMUX_DATA(VIO0_D13_MARK,	PSB7_0, PSB6_1, PTK7_FN),
+	PINMUX_DATA(VIO0_D12_MARK,	PSB7_0, PSB6_1, PTK6_FN),
+	PINMUX_DATA(VIO0_D11_MARK,	PSB7_0, PSB6_1, PTK5_FN),
+	PINMUX_DATA(VIO0_D10_MARK,	PSB7_0, PSB6_1, PTK4_FN),
+	PINMUX_DATA(VIO0_D9_MARK,	PSB7_0, PSB6_1, PTK3_FN),
+	PINMUX_DATA(VIO0_D8_MARK,	PSB7_0, PSB6_1, PTK2_FN),
+
+	PINMUX_DATA(IDED5_MARK,		PSB7_1, PSB6_0, PTK7_FN),
+	PINMUX_DATA(IDED4_MARK,		PSB7_1, PSB6_0, PTK6_FN),
+	PINMUX_DATA(IDED3_MARK,		PSB7_1, PSB6_0, PTK5_FN),
+	PINMUX_DATA(IDED2_MARK,		PSB7_1, PSB6_0, PTK4_FN),
+	PINMUX_DATA(IDED1_MARK,		PSB7_1, PSB6_0, PTK3_FN),
+	PINMUX_DATA(IDED0_MARK,		PSB7_1, PSB6_0, PTK2_FN),
+
+	PINMUX_DATA(VIO0_FLD_MARK,	PTK1_FN),
+	PINMUX_DATA(VIO0_HD_MARK,	PTK0_FN),
+
+	/* PTL FN */
+	PINMUX_DATA(DV_D5_MARK,		PSB9_0, PSB8_0, PTL7_FN),
+	PINMUX_DATA(DV_D4_MARK,		PSB9_0, PSB8_0, PTL6_FN),
+	PINMUX_DATA(DV_D3_MARK,		PSE7_0, PSE6_0, PTL5_FN),
+	PINMUX_DATA(DV_D2_MARK,		PSC9_0, PSC8_0, PTL4_FN),
+	PINMUX_DATA(DV_D1_MARK,		PSC9_0, PSC8_0, PTL3_FN),
+	PINMUX_DATA(DV_D0_MARK,		PSC9_0, PSC8_0, PTL2_FN),
+	PINMUX_DATA(DV_D15_MARK,	PSD4_0,         PTL1_FN),
+	PINMUX_DATA(DV_D14_MARK,	PSE5_0, PSE4_0, PTL0_FN),
+
+	PINMUX_DATA(SCIF3_V_SCK_MARK,	PSB9_0, PSB8_1, PTL7_FN),
+	PINMUX_DATA(SCIF3_V_RXD_MARK,	PSB9_0, PSB8_1, PTL6_FN),
+	PINMUX_DATA(SCIF3_V_TXD_MARK,	PSE7_0, PSE6_1, PTL5_FN),
+	PINMUX_DATA(SCIF1_SCK_MARK,	PSC9_0, PSC8_1, PTL4_FN),
+	PINMUX_DATA(SCIF1_RXD_MARK,	PSC9_0, PSC8_1, PTL3_FN),
+	PINMUX_DATA(SCIF1_TXD_MARK,	PSC9_0, PSC8_1, PTL2_FN),
+
+	PINMUX_DATA(RMII_RXD0_MARK,	PSB9_1, PSB8_0, PTL7_FN),
+	PINMUX_DATA(RMII_RXD1_MARK,	PSB9_1, PSB8_0, PTL6_FN),
+	PINMUX_DATA(RMII_REF_CLK_MARK,	PSE7_1, PSE6_0, PTL5_FN),
+	PINMUX_DATA(RMII_TX_EN_MARK,	PSC9_1, PSC8_0, PTL4_FN),
+	PINMUX_DATA(RMII_TXD0_MARK,	PSC9_1, PSC8_0, PTL3_FN),
+	PINMUX_DATA(RMII_TXD1_MARK,	PSC9_1, PSC8_0, PTL2_FN),
+
+	PINMUX_DATA(MSIOF0_MCK_MARK,	PSE5_0, PSE4_1, PTL0_FN),
+
+	/* PTM FN */
+	PINMUX_DATA(DV_D13_MARK,	PSC13_0, PSC12_0, PTM7_FN),
+	PINMUX_DATA(DV_D12_MARK,	PSC13_0, PSC12_0, PTM6_FN),
+	PINMUX_DATA(DV_D11_MARK,	PSC13_0, PSC12_0, PTM5_FN),
+	PINMUX_DATA(DV_D10_MARK,	PSC13_0, PSC12_0, PTM4_FN),
+	PINMUX_DATA(DV_D9_MARK,		PSC11_0, PSC10_0, PTM3_FN),
+	PINMUX_DATA(DV_D8_MARK,		PSC11_0, PSC10_0, PTM2_FN),
+
+	PINMUX_DATA(MSIOF0_TSCK_MARK,	PSC13_0, PSC12_1, PTM7_FN),
+	PINMUX_DATA(MSIOF0_RXD_MARK,	PSC13_0, PSC12_1, PTM6_FN),
+	PINMUX_DATA(MSIOF0_TXD_MARK,	PSC13_0, PSC12_1, PTM5_FN),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK,	PSC13_0, PSC12_1, PTM4_FN),
+	PINMUX_DATA(MSIOF0_SS1_MARK,	PSC11_0, PSC10_1, PTM3_FN),
+	PINMUX_DATA(MSIOF0_RSCK_MARK,	PSC11_1, PSC10_0, PTM3_FN),
+	PINMUX_DATA(MSIOF0_SS2_MARK,	PSC11_0, PSC10_1, PTM2_FN),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK,	PSC11_1, PSC10_0, PTM2_FN),
+
+	PINMUX_DATA(LCDVCPWC_MARK,	PSA6_0, PTM1_FN),
+	PINMUX_DATA(LCDRD_MARK,		PSA7_0, PTM0_FN),
+
+	PINMUX_DATA(SCIF0_RXD_MARK,	PSA6_1, PTM1_FN),
+	PINMUX_DATA(SCIF0_SCK_MARK,	PSA7_1, PTM0_FN),
+
+	/* PTN FN */
+	PINMUX_DATA(VIO0_D1_MARK,	PTN7_FN),
+	PINMUX_DATA(VIO0_D0_MARK,	PTN6_FN),
+
+	PINMUX_DATA(DV_CLKI_MARK,	PSD11_0,          PTN5_FN),
+	PINMUX_DATA(DV_CLK_MARK,	PSD13_0, PSD12_0, PTN4_FN),
+	PINMUX_DATA(DV_VSYNC_MARK,	PSD15_0, PSD14_0, PTN3_FN),
+	PINMUX_DATA(DV_HSYNC_MARK,	PSB5_0,  PSB4_0,  PTN2_FN),
+	PINMUX_DATA(DV_D7_MARK,		PSB3_0,  PSB2_0,  PTN1_FN),
+	PINMUX_DATA(DV_D6_MARK,		PSB1_0,  PSB0_0,  PTN0_FN),
+
+	PINMUX_DATA(SCIF2_V_SCK_MARK,	PSD13_0, PSD12_1, PTN4_FN),
+	PINMUX_DATA(SCIF2_V_RXD_MARK,	PSD15_0, PSD14_1, PTN3_FN),
+	PINMUX_DATA(SCIF2_V_TXD_MARK,	PSB5_0,  PSB4_1,  PTN2_FN),
+	PINMUX_DATA(SCIF3_V_CTS_MARK,	PSB3_0,  PSB2_1,  PTN1_FN),
+	PINMUX_DATA(SCIF3_V_RTS_MARK,	PSB1_0,  PSB0_1,  PTN0_FN),
+
+	PINMUX_DATA(RMII_RX_ER_MARK,	PSB3_1, PSB2_0, PTN1_FN),
+	PINMUX_DATA(RMII_CRS_DV_MARK,	PSB1_1, PSB0_0, PTN0_FN),
+
+	/* PTQ FN */
+	PINMUX_DATA(D7_MARK, PTQ7_FN),
+	PINMUX_DATA(D6_MARK, PTQ6_FN),
+	PINMUX_DATA(D5_MARK, PTQ5_FN),
+	PINMUX_DATA(D4_MARK, PTQ4_FN),
+	PINMUX_DATA(D3_MARK, PTQ3_FN),
+	PINMUX_DATA(D2_MARK, PTQ2_FN),
+	PINMUX_DATA(D1_MARK, PTQ1_FN),
+	PINMUX_DATA(D0_MARK, PTQ0_FN),
+
+	/* PTR FN */
+	PINMUX_DATA(CS6B_CE1B_MARK,	                PTR7_FN),
+	PINMUX_DATA(CS6A_CE2B_MARK,	                PTR6_FN),
+	PINMUX_DATA(CS5B_CE1A_MARK,	                PTR5_FN),
+	PINMUX_DATA(CS5A_CE2A_MARK,	                PTR4_FN),
+	PINMUX_DATA(IOIS16_MARK,	PSA5_0,         PTR3_FN),
+	PINMUX_DATA(WAIT_MARK,		                PTR2_FN),
+	PINMUX_DATA(WE3_ICIOWR_MARK,	PSA1_0, PSA0_0, PTR1_FN),
+	PINMUX_DATA(WE2_ICIORD_MARK,	PSD1_0, PSD0_0, PTR0_FN),
+
+	PINMUX_DATA(LCDLCLK_MARK,	PSA5_1,         PTR3_FN),
+
+	PINMUX_DATA(IDEA2_MARK,		PSD1_1, PSD0_0, PTR0_FN),
+
+	PINMUX_DATA(TPUTO3_MARK,	PSA1_0, PSA0_1, PTR1_FN),
+	PINMUX_DATA(TPUTI3_MARK,	PSA1_1, PSA0_0, PTR1_FN),
+	PINMUX_DATA(TPUTO2_MARK,	PSD1_0, PSD0_1, PTR0_FN),
+
+	/* PTS FN */
+	PINMUX_DATA(VIO_CKO_MARK,	PTS6_FN),
+
+	PINMUX_DATA(TPUTI2_MARK,	PSE9_0, PSE8_1, PTS5_FN),
+
+	PINMUX_DATA(IDEIORDY_MARK,	PSE9_1, PSE8_0, PTS5_FN),
+
+	PINMUX_DATA(VIO1_FLD_MARK,	PSE9_0, PSE8_0, PTS5_FN),
+	PINMUX_DATA(VIO1_HD_MARK,	PSA10_0,        PTS4_FN),
+	PINMUX_DATA(VIO1_VD_MARK,	PSA9_0,         PTS3_FN),
+	PINMUX_DATA(VIO1_CLK_MARK,	PSA9_0,         PTS2_FN),
+	PINMUX_DATA(VIO1_D7_MARK,	PSB7_0, PSB6_0, PTS1_FN),
+	PINMUX_DATA(VIO1_D6_MARK,	PSB7_0, PSB6_0, PTS0_FN),
+
+	PINMUX_DATA(SCIF5_SCK_MARK,	PSA10_1, PTS4_FN),
+	PINMUX_DATA(SCIF5_RXD_MARK,	PSA9_1,  PTS3_FN),
+	PINMUX_DATA(SCIF5_TXD_MARK,	PSA9_1,  PTS2_FN),
+
+	PINMUX_DATA(VIO0_D15_MARK,	PSB7_0, PSB6_1, PTS1_FN),
+	PINMUX_DATA(VIO0_D14_MARK,	PSB7_0, PSB6_1, PTS0_FN),
+
+	PINMUX_DATA(IDED7_MARK,		PSB7_1, PSB6_0, PTS1_FN),
+	PINMUX_DATA(IDED6_MARK,		PSB7_1, PSB6_0, PTS0_FN),
+
+	/* PTT FN */
+	PINMUX_DATA(D15_MARK, PTT7_FN),
+	PINMUX_DATA(D14_MARK, PTT6_FN),
+	PINMUX_DATA(D13_MARK, PTT5_FN),
+	PINMUX_DATA(D12_MARK, PTT4_FN),
+	PINMUX_DATA(D11_MARK, PTT3_FN),
+	PINMUX_DATA(D10_MARK, PTT2_FN),
+	PINMUX_DATA(D9_MARK,  PTT1_FN),
+	PINMUX_DATA(D8_MARK,  PTT0_FN),
+
+	/* PTU FN */
+	PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN),
+	PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN),
+
+	PINMUX_DATA(FSIOASD_MARK,	PSE1_0, PTU5_FN),
+	PINMUX_DATA(FSIIABCK_MARK,	PSE1_0, PTU4_FN),
+	PINMUX_DATA(FSIIALRCK_MARK,	PSE1_0, PTU3_FN),
+	PINMUX_DATA(FSIOABCK_MARK,	PSE1_0, PTU2_FN),
+	PINMUX_DATA(FSIOALRCK_MARK,	PSE1_0, PTU1_FN),
+	PINMUX_DATA(CLKAUDIOAO_MARK,	PSE0_0, PTU0_FN),
+
+	/* PTV FN */
+	PINMUX_DATA(FSIIBSD_MARK,	PSD7_0,  PSD6_0,  PTV7_FN),
+	PINMUX_DATA(FSIOBSD_MARK,	PSD7_0,  PSD6_0,  PTV6_FN),
+	PINMUX_DATA(FSIIBBCK_MARK,	PSC15_0, PSC14_0, PTV5_FN),
+	PINMUX_DATA(FSIIBLRCK_MARK,	PSC15_0, PSC14_0, PTV4_FN),
+	PINMUX_DATA(FSIOBBCK_MARK,	PSC15_0, PSC14_0, PTV3_FN),
+	PINMUX_DATA(FSIOBLRCK_MARK,	PSC15_0, PSC14_0, PTV2_FN),
+	PINMUX_DATA(CLKAUDIOBO_MARK,	PSE3_0,  PSE2_0,  PTV1_FN),
+	PINMUX_DATA(FSIIASD_MARK,	PSE10_0,          PTV0_FN),
+
+	PINMUX_DATA(MSIOF1_SS2_MARK,	PSD7_0,  PSD6_1,  PTV7_FN),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK,	PSD7_1,  PSD6_0,  PTV7_FN),
+	PINMUX_DATA(MSIOF1_SS1_MARK,	PSD7_0,  PSD6_1,  PTV6_FN),
+	PINMUX_DATA(MSIOF1_RSCK_MARK,	PSD7_1,  PSD6_0,  PTV6_FN),
+	PINMUX_DATA(MSIOF1_RXD_MARK,	PSC15_0, PSC14_1, PTV5_FN),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK,	PSC15_0, PSC14_1, PTV4_FN),
+	PINMUX_DATA(MSIOF1_TSCK_MARK,	PSC15_0, PSC14_1, PTV3_FN),
+	PINMUX_DATA(MSIOF1_TXD_MARK,	PSC15_0, PSC14_1, PTV2_FN),
+	PINMUX_DATA(MSIOF1_MCK_MARK,	PSE3_0,  PSE2_1,  PTV1_FN),
+
+	/* PTW FN */
+	PINMUX_DATA(MMC_D7_MARK,	PSE13_0, PSE12_0, PTW7_FN),
+	PINMUX_DATA(MMC_D6_MARK,	PSE13_0, PSE12_0, PTW6_FN),
+	PINMUX_DATA(MMC_D5_MARK,	PSE13_0, PSE12_0, PTW5_FN),
+	PINMUX_DATA(MMC_D4_MARK,	PSE13_0, PSE12_0, PTW4_FN),
+	PINMUX_DATA(MMC_D3_MARK,	PSA13_0,          PTW3_FN),
+	PINMUX_DATA(MMC_D2_MARK,	PSA13_0,          PTW2_FN),
+	PINMUX_DATA(MMC_D1_MARK,	PSA13_0,          PTW1_FN),
+	PINMUX_DATA(MMC_D0_MARK,	PSA13_0,          PTW0_FN),
+
+	PINMUX_DATA(SDHI1CD_MARK,	PSE13_0, PSE12_1, PTW7_FN),
+	PINMUX_DATA(SDHI1WP_MARK,	PSE13_0, PSE12_1, PTW6_FN),
+	PINMUX_DATA(SDHI1D3_MARK,	PSE13_0, PSE12_1, PTW5_FN),
+	PINMUX_DATA(SDHI1D2_MARK,	PSE13_0, PSE12_1, PTW4_FN),
+	PINMUX_DATA(SDHI1D1_MARK,	PSA13_1,          PTW3_FN),
+	PINMUX_DATA(SDHI1D0_MARK,	PSA13_1,          PTW2_FN),
+	PINMUX_DATA(SDHI1CMD_MARK,	PSA13_1,          PTW1_FN),
+	PINMUX_DATA(SDHI1CLK_MARK,	PSA13_1,          PTW0_FN),
+
+	PINMUX_DATA(IODACK_MARK,	PSE13_1, PSE12_0, PTW7_FN),
+	PINMUX_DATA(IDERST_MARK,	PSE13_1, PSE12_0, PTW6_FN),
+	PINMUX_DATA(EXBUF_ENB_MARK,	PSE13_1, PSE12_0, PTW5_FN),
+	PINMUX_DATA(DIRECTION_MARK,	PSE13_1, PSE12_0, PTW4_FN),
+
+	/* PTX FN */
+	PINMUX_DATA(DMAC_DACK1_MARK,	PSA12_0, PTX7_FN),
+	PINMUX_DATA(DMAC_DREQ1_MARK,	PSA12_0, PTX6_FN),
+
+	PINMUX_DATA(IRDA_OUT_MARK,	PSA12_1, PTX7_FN),
+	PINMUX_DATA(IRDA_IN_MARK,	PSA12_1, PTX6_FN),
+
+	PINMUX_DATA(TSIF_TS0_SDAT_MARK,	PSC0_0, PTX5_FN),
+	PINMUX_DATA(TSIF_TS0_SCK_MARK,	PSC1_0, PTX4_FN),
+	PINMUX_DATA(TSIF_TS0_SDEN_MARK,	PSC2_0, PTX3_FN),
+	PINMUX_DATA(TSIF_TS0_SPSYNC_MARK,       PTX2_FN),
+
+	PINMUX_DATA(LNKSTA_MARK,	PSC0_1, PTX5_FN),
+	PINMUX_DATA(MDIO_MARK,		PSC1_1, PTX4_FN),
+	PINMUX_DATA(MDC_MARK,		PSC2_1, PTX3_FN),
+
+	PINMUX_DATA(MMC_CLK_MARK, PTX1_FN),
+	PINMUX_DATA(MMC_CMD_MARK, PTX0_FN),
+
+	/* PTY FN */
+	PINMUX_DATA(SDHI0CD_MARK,  PTY7_FN),
+	PINMUX_DATA(SDHI0WP_MARK,  PTY6_FN),
+	PINMUX_DATA(SDHI0D3_MARK,  PTY5_FN),
+	PINMUX_DATA(SDHI0D2_MARK,  PTY4_FN),
+	PINMUX_DATA(SDHI0D1_MARK,  PTY3_FN),
+	PINMUX_DATA(SDHI0D0_MARK,  PTY2_FN),
+	PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN),
+	PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN),
+
+	/* PTZ FN */
+	PINMUX_DATA(INTC_IRQ7_MARK,	PSB10_0, PTZ7_FN),
+	PINMUX_DATA(INTC_IRQ6_MARK,	PSB11_0, PTZ6_FN),
+	PINMUX_DATA(INTC_IRQ5_MARK,	PSB12_0, PTZ5_FN),
+	PINMUX_DATA(INTC_IRQ4_MARK,	PSB13_0, PTZ4_FN),
+	PINMUX_DATA(INTC_IRQ3_MARK,	PSB14_0, PTZ3_FN),
+	PINMUX_DATA(INTC_IRQ2_MARK,	         PTZ2_FN),
+	PINMUX_DATA(INTC_IRQ1_MARK,	         PTZ1_FN),
+	PINMUX_DATA(INTC_IRQ0_MARK,	         PTZ0_FN),
+
+	PINMUX_DATA(SCIF3_I_CTS_MARK,	PSB10_1, PTZ7_FN),
+	PINMUX_DATA(SCIF3_I_RTS_MARK,	PSB11_1, PTZ6_FN),
+	PINMUX_DATA(SCIF3_I_SCK_MARK,	PSB12_1, PTZ5_FN),
+	PINMUX_DATA(SCIF3_I_RXD_MARK,	PSB13_1, PTZ4_FN),
+	PINMUX_DATA(SCIF3_I_TXD_MARK,	PSB14_1, PTZ3_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PTA */
+	PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+	PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+	PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+	PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+	PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+	PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+	PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+	PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+	/* PTB */
+	PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+	PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+	PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+	PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+	PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+	PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+	PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+	PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+	/* PTC */
+	PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+	PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+	PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+	PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+	PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+	PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+	PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+	PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+	/* PTD */
+	PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+	PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+	PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+	PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+	PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+	PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+	PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+	PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+	/* PTE */
+	PINMUX_GPIO(GPIO_PTE7, PTE7_DATA),
+	PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+	PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+	PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+	PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+	PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+	PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+	PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+	/* PTF */
+	PINMUX_GPIO(GPIO_PTF7, PTF7_DATA),
+	PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+	PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+	PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+	PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+	PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+	PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+	PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+	/* PTG */
+	PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+	PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+	PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+	PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+	PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+	PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+	/* PTH */
+	PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+	PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+	PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+	PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+	PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+	PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+	PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+	PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+	/* PTJ */
+	PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+	PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+	PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+	PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+	PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+	PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+	PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+	/* PTK */
+	PINMUX_GPIO(GPIO_PTK7, PTK7_DATA),
+	PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+	PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+	PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+	PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+	PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+	PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+	PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+	/* PTL */
+	PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+	PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+	PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+	PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+	PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+	PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+	PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+	PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+	/* PTM */
+	PINMUX_GPIO(GPIO_PTM7, PTM7_DATA),
+	PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+	PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+	PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+	PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+	PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+	PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+	PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+	/* PTN */
+	PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+	PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+	PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+	PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+	PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+	PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+	PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+	PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+	/* PTQ */
+	PINMUX_GPIO(GPIO_PTQ7, PTQ7_DATA),
+	PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA),
+	PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA),
+	PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA),
+	PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+	PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+	PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+	PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+	/* PTR */
+	PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+	PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+	PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+	PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+	PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+	PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+	PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+	PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+	/* PTS */
+	PINMUX_GPIO(GPIO_PTS6, PTS6_DATA),
+	PINMUX_GPIO(GPIO_PTS5, PTS5_DATA),
+	PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+	PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+	PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+	PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+	PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+	/* PTT */
+	PINMUX_GPIO(GPIO_PTT7, PTT7_DATA),
+	PINMUX_GPIO(GPIO_PTT6, PTT6_DATA),
+	PINMUX_GPIO(GPIO_PTT5, PTT5_DATA),
+	PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+	PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+	PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+	PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+	PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+	/* PTU */
+	PINMUX_GPIO(GPIO_PTU7, PTU7_DATA),
+	PINMUX_GPIO(GPIO_PTU6, PTU6_DATA),
+	PINMUX_GPIO(GPIO_PTU5, PTU5_DATA),
+	PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+	PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+	PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+	PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+	PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+	/* PTV */
+	PINMUX_GPIO(GPIO_PTV7, PTV7_DATA),
+	PINMUX_GPIO(GPIO_PTV6, PTV6_DATA),
+	PINMUX_GPIO(GPIO_PTV5, PTV5_DATA),
+	PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+	PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+	PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+	PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+	PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+	/* PTW */
+	PINMUX_GPIO(GPIO_PTW7, PTW7_DATA),
+	PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+	PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+	PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+	PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+	PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+	PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+	PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+	/* PTX */
+	PINMUX_GPIO(GPIO_PTX7, PTX7_DATA),
+	PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+	PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+	PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+	PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+	PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+	PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+	PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+	/* PTY */
+	PINMUX_GPIO(GPIO_PTY7, PTY7_DATA),
+	PINMUX_GPIO(GPIO_PTY6, PTY6_DATA),
+	PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+	PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+	PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+	PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+	PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+	PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+	/* PTZ */
+	PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA),
+	PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA),
+	PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+	PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+	PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+	PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+	PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+	PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA),
+
+	/* BSC */
+	PINMUX_GPIO(GPIO_FN_D31,	D31_MARK),
+	PINMUX_GPIO(GPIO_FN_D30,	D30_MARK),
+	PINMUX_GPIO(GPIO_FN_D29,	D29_MARK),
+	PINMUX_GPIO(GPIO_FN_D28,	D28_MARK),
+	PINMUX_GPIO(GPIO_FN_D27,	D27_MARK),
+	PINMUX_GPIO(GPIO_FN_D26,	D26_MARK),
+	PINMUX_GPIO(GPIO_FN_D25,	D25_MARK),
+	PINMUX_GPIO(GPIO_FN_D24,	D24_MARK),
+	PINMUX_GPIO(GPIO_FN_D23,	D23_MARK),
+	PINMUX_GPIO(GPIO_FN_D22,	D22_MARK),
+	PINMUX_GPIO(GPIO_FN_D21,	D21_MARK),
+	PINMUX_GPIO(GPIO_FN_D20,	D20_MARK),
+	PINMUX_GPIO(GPIO_FN_D19,	D19_MARK),
+	PINMUX_GPIO(GPIO_FN_D18,	D18_MARK),
+	PINMUX_GPIO(GPIO_FN_D17,	D17_MARK),
+	PINMUX_GPIO(GPIO_FN_D16,	D16_MARK),
+	PINMUX_GPIO(GPIO_FN_D15,	D15_MARK),
+	PINMUX_GPIO(GPIO_FN_D14,	D14_MARK),
+	PINMUX_GPIO(GPIO_FN_D13,	D13_MARK),
+	PINMUX_GPIO(GPIO_FN_D12,	D12_MARK),
+	PINMUX_GPIO(GPIO_FN_D11,	D11_MARK),
+	PINMUX_GPIO(GPIO_FN_D10,	D10_MARK),
+	PINMUX_GPIO(GPIO_FN_D9,		D9_MARK),
+	PINMUX_GPIO(GPIO_FN_D8,		D8_MARK),
+	PINMUX_GPIO(GPIO_FN_D7,		D7_MARK),
+	PINMUX_GPIO(GPIO_FN_D6,		D6_MARK),
+	PINMUX_GPIO(GPIO_FN_D5,		D5_MARK),
+	PINMUX_GPIO(GPIO_FN_D4,		D4_MARK),
+	PINMUX_GPIO(GPIO_FN_D3,		D3_MARK),
+	PINMUX_GPIO(GPIO_FN_D2,		D2_MARK),
+	PINMUX_GPIO(GPIO_FN_D1,		D1_MARK),
+	PINMUX_GPIO(GPIO_FN_D0,		D0_MARK),
+	PINMUX_GPIO(GPIO_FN_A25,	A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24,	A24_MARK),
+	PINMUX_GPIO(GPIO_FN_A23,	A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22,	A22_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6B_CE1B,	CS6B_CE1B_MARK),
+	PINMUX_GPIO(GPIO_FN_CS6A_CE2B,	CS6A_CE2B_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5B_CE1A,	CS5B_CE1A_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5A_CE2A,	CS5A_CE2A_MARK),
+	PINMUX_GPIO(GPIO_FN_WE3_ICIOWR,	WE3_ICIOWR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE2_ICIORD,	WE2_ICIORD_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16,	IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_WAIT,	WAIT_MARK),
+	PINMUX_GPIO(GPIO_FN_BS,		BS_MARK),
+
+	/* KEYSC */
+	PINMUX_GPIO(GPIO_FN_KEYOUT5_IN5,	KEYOUT5_IN5_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT4_IN6,	KEYOUT4_IN6_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN4,		KEYIN4_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN3,		KEYIN3_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN2,		KEYIN2_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN1,		KEYIN1_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYIN0,		KEYIN0_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT3,		KEYOUT3_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT2,		KEYOUT2_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT1,		KEYOUT1_MARK),
+	PINMUX_GPIO(GPIO_FN_KEYOUT0,		KEYOUT0_MARK),
+
+	/* ATAPI */
+	PINMUX_GPIO(GPIO_FN_IDED15,	IDED15_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED14,	IDED14_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED13,	IDED13_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED12,	IDED12_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED11,	IDED11_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED10,	IDED10_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED9,	IDED9_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED8,	IDED8_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED7,	IDED7_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED6,	IDED6_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED5,	IDED5_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED4,	IDED4_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED3,	IDED3_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED2,	IDED2_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED1,	IDED1_MARK),
+	PINMUX_GPIO(GPIO_FN_IDED0,	IDED0_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEA2,	IDEA2_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEA1,	IDEA1_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEA0,	IDEA0_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEIOWR,	IDEIOWR_MARK),
+	PINMUX_GPIO(GPIO_FN_IODREQ,	IODREQ_MARK),
+	PINMUX_GPIO(GPIO_FN_IDECS0,	IDECS0_MARK),
+	PINMUX_GPIO(GPIO_FN_IDECS1,	IDECS1_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEIORD,	IDEIORD_MARK),
+	PINMUX_GPIO(GPIO_FN_DIRECTION,	DIRECTION_MARK),
+	PINMUX_GPIO(GPIO_FN_EXBUF_ENB,	EXBUF_ENB_MARK),
+	PINMUX_GPIO(GPIO_FN_IDERST,	IDERST_MARK),
+	PINMUX_GPIO(GPIO_FN_IODACK,	IODACK_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEINT,	IDEINT_MARK),
+	PINMUX_GPIO(GPIO_FN_IDEIORDY,	IDEIORDY_MARK),
+
+	/* TPU */
+	PINMUX_GPIO(GPIO_FN_TPUTO3,	TPUTO3_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTO2,	TPUTO2_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTO1,	TPUTO1_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTO0,	TPUTO0_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTI3,	TPUTI3_MARK),
+	PINMUX_GPIO(GPIO_FN_TPUTI2,	TPUTI2_MARK),
+
+	/* LCDC */
+	PINMUX_GPIO(GPIO_FN_LCDD23,	LCDD23_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD22,	LCDD22_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD21,	LCDD21_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD20,	LCDD20_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD19,	LCDD19_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD18,	LCDD18_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD17,	LCDD17_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD16,	LCDD16_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD15,	LCDD15_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD14,	LCDD14_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD13,	LCDD13_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD12,	LCDD12_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD11,	LCDD11_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD10,	LCDD10_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD9,	LCDD9_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD8,	LCDD8_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD7,	LCDD7_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD6,	LCDD6_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD5,	LCDD5_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD4,	LCDD4_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD3,	LCDD3_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD2,	LCDD2_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD1,	LCDD1_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDD0,	LCDD0_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVSYN,	LCDVSYN_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDDISP,	LCDDISP_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDRS,	LCDRS_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDHSYN,	LCDHSYN_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDCS,	LCDCS_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDDON,	LCDDON_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDDCK,	LCDDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDWR,	LCDWR_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVEPWC,	LCDVEPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDVCPWC,	LCDVCPWC_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDRD,	LCDRD_MARK),
+	PINMUX_GPIO(GPIO_FN_LCDLCLK,	LCDLCLK_MARK),
+
+	/* SCIF0 */
+	PINMUX_GPIO(GPIO_FN_SCIF0_TXD,	SCIF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RXD,	SCIF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_SCK,	SCIF0_SCK_MARK),
+
+	/* SCIF1 */
+	PINMUX_GPIO(GPIO_FN_SCIF1_SCK,	SCIF1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RXD,	SCIF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_TXD,	SCIF1_TXD_MARK),
+
+	/* SCIF2 */
+	PINMUX_GPIO(GPIO_FN_SCIF2_L_TXD,	SCIF2_L_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_L_SCK,	SCIF2_L_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_L_RXD,	SCIF2_L_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_V_TXD,	SCIF2_V_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_V_SCK,	SCIF2_V_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_V_RXD,	SCIF2_V_RXD_MARK),
+
+	/* SCIF3 */
+	PINMUX_GPIO(GPIO_FN_SCIF3_V_SCK,	SCIF3_V_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_V_RXD,	SCIF3_V_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_V_TXD,	SCIF3_V_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_V_CTS,	SCIF3_V_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_V_RTS,	SCIF3_V_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_I_SCK,	SCIF3_I_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_I_RXD,	SCIF3_I_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_I_TXD,	SCIF3_I_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_I_CTS,	SCIF3_I_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_I_RTS,	SCIF3_I_RTS_MARK),
+
+	/* SCIF4 */
+	PINMUX_GPIO(GPIO_FN_SCIF4_SCK,	SCIF4_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_RXD,	SCIF4_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_TXD,	SCIF4_TXD_MARK),
+
+	/* SCIF5 */
+	PINMUX_GPIO(GPIO_FN_SCIF5_SCK,	SCIF5_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_RXD,	SCIF5_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_TXD,	SCIF5_TXD_MARK),
+
+	/* FSI */
+	PINMUX_GPIO(GPIO_FN_FSIMCKB,	FSIMCKB_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIMCKA,	FSIMCKA_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIOASD,	FSIOASD_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIIABCK,	FSIIABCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIIALRCK,	FSIIALRCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIOABCK,	FSIOABCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIOALRCK,	FSIOALRCK_MARK),
+	PINMUX_GPIO(GPIO_FN_CLKAUDIOAO,	CLKAUDIOAO_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIIBSD,	FSIIBSD_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIOBSD,	FSIOBSD_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIIBBCK,	FSIIBBCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIIBLRCK,	FSIIBLRCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIOBBCK,	FSIOBBCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIOBLRCK,	FSIOBLRCK_MARK),
+	PINMUX_GPIO(GPIO_FN_CLKAUDIOBO,	CLKAUDIOBO_MARK),
+	PINMUX_GPIO(GPIO_FN_FSIIASD,	FSIIASD_MARK),
+
+	/* AUD */
+	PINMUX_GPIO(GPIO_FN_AUDCK,	AUDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDSYNC,	AUDSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA3,	AUDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA2,	AUDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA1,	AUDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA0,	AUDATA0_MARK),
+
+	/* VIO */
+	PINMUX_GPIO(GPIO_FN_VIO_CKO,	VIO_CKO_MARK),
+
+	/* VIO0 */
+	PINMUX_GPIO(GPIO_FN_VIO0_D15,	VIO0_D15_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D14,	VIO0_D14_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D13,	VIO0_D13_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D12,	VIO0_D12_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D11,	VIO0_D11_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D10,	VIO0_D10_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D9,	VIO0_D9_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D8,	VIO0_D8_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D7,	VIO0_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D6,	VIO0_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D5,	VIO0_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D4,	VIO0_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D3,	VIO0_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D2,	VIO0_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D1,	VIO0_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_D0,	VIO0_D0_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_VD,	VIO0_VD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_CLK,	VIO0_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_FLD,	VIO0_FLD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO0_HD,	VIO0_HD_MARK),
+
+	/* VIO1 */
+	PINMUX_GPIO(GPIO_FN_VIO1_D7,	VIO1_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D6,	VIO1_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D5,	VIO1_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D4,	VIO1_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D3,	VIO1_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D2,	VIO1_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D1,	VIO1_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_D0,	VIO1_D0_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_FLD,	VIO1_FLD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_HD,	VIO1_HD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_VD,	VIO1_VD_MARK),
+	PINMUX_GPIO(GPIO_FN_VIO1_CLK,	VIO1_CLK_MARK),
+
+	/* Eth */
+	PINMUX_GPIO(GPIO_FN_RMII_RXD0,		RMII_RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_RXD1,		RMII_RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_TXD0,		RMII_TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_TXD1,		RMII_TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_REF_CLK,	RMII_REF_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_TX_EN,		RMII_TX_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_RX_ER,		RMII_RX_ER_MARK),
+	PINMUX_GPIO(GPIO_FN_RMII_CRS_DV,	RMII_CRS_DV_MARK),
+	PINMUX_GPIO(GPIO_FN_LNKSTA,		LNKSTA_MARK),
+	PINMUX_GPIO(GPIO_FN_MDIO,		MDIO_MARK),
+	PINMUX_GPIO(GPIO_FN_MDC,		MDC_MARK),
+
+	/* System */
+	PINMUX_GPIO(GPIO_FN_PDSTATUS,	PDSTATUS_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS2,	STATUS2_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS0,	STATUS0_MARK),
+
+	/* VOU */
+	PINMUX_GPIO(GPIO_FN_DV_D15,	DV_D15_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D14,	DV_D14_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D13,	DV_D13_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D12,	DV_D12_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D11,	DV_D11_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D10,	DV_D10_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D9,	DV_D9_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D8,	DV_D8_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D7,	DV_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D6,	DV_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D5,	DV_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D4,	DV_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D3,	DV_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D2,	DV_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D1,	DV_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_D0,	DV_D0_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_CLKI,	DV_CLKI_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_CLK,	DV_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_VSYNC,	DV_VSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_DV_HSYNC,	DV_HSYNC_MARK),
+
+	/* MSIOF0 */
+	PINMUX_GPIO(GPIO_FN_MSIOF0_RXD,		MSIOF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_TXD,		MSIOF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_MCK,		MSIOF0_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_TSCK,	MSIOF0_TSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_SS1,		MSIOF0_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_SS2,		MSIOF0_SS2_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_TSYNC,	MSIOF0_TSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_RSCK,	MSIOF0_RSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF0_RSYNC,	MSIOF0_RSYNC_MARK),
+
+	/* MSIOF1 */
+	PINMUX_GPIO(GPIO_FN_MSIOF1_RXD,		MSIOF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_TXD,		MSIOF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_MCK,		MSIOF1_MCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_TSCK,	MSIOF1_TSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_SS1,		MSIOF1_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_SS2,		MSIOF1_SS2_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_TSYNC,	MSIOF1_TSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_RSCK,	MSIOF1_RSCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MSIOF1_RSYNC,	MSIOF1_RSYNC_MARK),
+
+	/* DMAC */
+	PINMUX_GPIO(GPIO_FN_DMAC_DACK0,	DMAC_DACK0_MARK),
+	PINMUX_GPIO(GPIO_FN_DMAC_DREQ0,	DMAC_DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_DMAC_DACK1,	DMAC_DACK1_MARK),
+	PINMUX_GPIO(GPIO_FN_DMAC_DREQ1,	DMAC_DREQ1_MARK),
+
+	/* SDHI0 */
+	PINMUX_GPIO(GPIO_FN_SDHI0CD,	SDHI0CD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0WP,	SDHI0WP_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0CMD,	SDHI0CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0CLK,	SDHI0CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D3,	SDHI0D3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D2,	SDHI0D2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D1,	SDHI0D1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI0D0,	SDHI0D0_MARK),
+
+	/* SDHI1 */
+	PINMUX_GPIO(GPIO_FN_SDHI1CD,	SDHI1CD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1WP,	SDHI1WP_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1CMD,	SDHI1CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1CLK,	SDHI1CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D3,	SDHI1D3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D2,	SDHI1D2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D1,	SDHI1D1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDHI1D0,	SDHI1D0_MARK),
+
+	/* MMC */
+	PINMUX_GPIO(GPIO_FN_MMC_D7,	MMC_D7_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D6,	MMC_D6_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D5,	MMC_D5_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D4,	MMC_D4_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D3,	MMC_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D2,	MMC_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D1,	MMC_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_D0,	MMC_D0_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_CLK,	MMC_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_MMC_CMD,	MMC_CMD_MARK),
+
+	/* IrDA */
+	PINMUX_GPIO(GPIO_FN_IRDA_OUT,	IRDA_OUT_MARK),
+	PINMUX_GPIO(GPIO_FN_IRDA_IN,	IRDA_IN_MARK),
+
+	/* TSIF */
+	PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDAT,	TSIF_TS0_SDAT_MARK),
+	PINMUX_GPIO(GPIO_FN_TSIF_TS0_SCK,	TSIF_TS0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDEN,	TSIF_TS0_SDEN_MARK),
+	PINMUX_GPIO(GPIO_FN_TSIF_TS0_SPSYNC,	TSIF_TS0_SPSYNC_MARK),
+
+	/* IRQ */
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ7,	INTC_IRQ7_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ6,	INTC_IRQ6_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ5,	INTC_IRQ5_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ4,	INTC_IRQ4_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ3,	INTC_IRQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ2,	INTC_IRQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ1,	INTC_IRQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC_IRQ0,	INTC_IRQ0_MARK),
+ };
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) {
+		PTA7_FN, PTA7_OUT, PTA7_IN_PU, PTA7_IN,
+		PTA6_FN, PTA6_OUT, PTA6_IN_PU, PTA6_IN,
+		PTA5_FN, PTA5_OUT, PTA5_IN_PU, PTA5_IN,
+		PTA4_FN, PTA4_OUT, PTA4_IN_PU, PTA4_IN,
+		PTA3_FN, PTA3_OUT, PTA3_IN_PU, PTA3_IN,
+		PTA2_FN, PTA2_OUT, PTA2_IN_PU, PTA2_IN,
+		PTA1_FN, PTA1_OUT, PTA1_IN_PU, PTA1_IN,
+		PTA0_FN, PTA0_OUT, PTA0_IN_PU, PTA0_IN }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) {
+		PTB7_FN, PTB7_OUT, PTB7_IN_PU, PTB7_IN,
+		PTB6_FN, PTB6_OUT, PTB6_IN_PU, PTB6_IN,
+		PTB5_FN, PTB5_OUT, PTB5_IN_PU, PTB5_IN,
+		PTB4_FN, PTB4_OUT, PTB4_IN_PU, PTB4_IN,
+		PTB3_FN, PTB3_OUT, PTB3_IN_PU, PTB3_IN,
+		PTB2_FN, PTB2_OUT, PTB2_IN_PU, PTB2_IN,
+		PTB1_FN, PTB1_OUT, PTB1_IN_PU, PTB1_IN,
+		PTB0_FN, PTB0_OUT, PTB0_IN_PU, PTB0_IN }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) {
+		PTC7_FN, PTC7_OUT, PTC7_IN_PU, PTC7_IN,
+		PTC6_FN, PTC6_OUT, PTC6_IN_PU, PTC6_IN,
+		PTC5_FN, PTC5_OUT, PTC5_IN_PU, PTC5_IN,
+		PTC4_FN, PTC4_OUT, PTC4_IN_PU, PTC4_IN,
+		PTC3_FN, PTC3_OUT, PTC3_IN_PU, PTC3_IN,
+		PTC2_FN, PTC2_OUT, PTC2_IN_PU, PTC2_IN,
+		PTC1_FN, PTC1_OUT, PTC1_IN_PU, PTC1_IN,
+		PTC0_FN, PTC0_OUT, PTC0_IN_PU, PTC0_IN }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) {
+		PTD7_FN, PTD7_OUT, PTD7_IN_PU, PTD7_IN,
+		PTD6_FN, PTD6_OUT, PTD6_IN_PU, PTD6_IN,
+		PTD5_FN, PTD5_OUT, PTD5_IN_PU, PTD5_IN,
+		PTD4_FN, PTD4_OUT, PTD4_IN_PU, PTD4_IN,
+		PTD3_FN, PTD3_OUT, PTD3_IN_PU, PTD3_IN,
+		PTD2_FN, PTD2_OUT, PTD2_IN_PU, PTD2_IN,
+		PTD1_FN, PTD1_OUT, PTD1_IN_PU, PTD1_IN,
+		PTD0_FN, PTD0_OUT, PTD0_IN_PU, PTD0_IN }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) {
+		PTE7_FN, PTE7_OUT, PTE7_IN_PU, PTE7_IN,
+		PTE6_FN, PTE6_OUT, PTE6_IN_PU, PTE6_IN,
+		PTE5_FN, PTE5_OUT, PTE5_IN_PU, PTE5_IN,
+		PTE4_FN, PTE4_OUT, PTE4_IN_PU, PTE4_IN,
+		PTE3_FN, PTE3_OUT, PTE3_IN_PU, PTE3_IN,
+		PTE2_FN, PTE2_OUT, PTE2_IN_PU, PTE2_IN,
+		PTE1_FN, PTE1_OUT, PTE1_IN_PU, PTE1_IN,
+		PTE0_FN, PTE0_OUT, PTE0_IN_PU, PTE0_IN }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) {
+		PTF7_FN, PTF7_OUT, PTF7_IN_PU, PTF7_IN,
+		PTF6_FN, PTF6_OUT, PTF6_IN_PU, PTF6_IN,
+		PTF5_FN, PTF5_OUT, PTF5_IN_PU, PTF5_IN,
+		PTF4_FN, PTF4_OUT, PTF4_IN_PU, PTF4_IN,
+		PTF3_FN, PTF3_OUT, PTF3_IN_PU, PTF3_IN,
+		PTF2_FN, PTF2_OUT, PTF2_IN_PU, PTF2_IN,
+		PTF1_FN, PTF1_OUT, PTF1_IN_PU, PTF1_IN,
+		PTF0_FN, PTF0_OUT, PTF0_IN_PU, PTF0_IN }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PTG5_FN, PTG5_OUT, 0, 0,
+		PTG4_FN, PTG4_OUT, 0, 0,
+		PTG3_FN, PTG3_OUT, 0, 0,
+		PTG2_FN, PTG2_OUT, 0, 0,
+		PTG1_FN, PTG1_OUT, 0, 0,
+		PTG0_FN, PTG0_OUT, 0, 0 }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) {
+		PTH7_FN, PTH7_OUT, PTH7_IN_PU, PTH7_IN,
+		PTH6_FN, PTH6_OUT, PTH6_IN_PU, PTH6_IN,
+		PTH5_FN, PTH5_OUT, PTH5_IN_PU, PTH5_IN,
+		PTH4_FN, PTH4_OUT, PTH4_IN_PU, PTH4_IN,
+		PTH3_FN, PTH3_OUT, PTH3_IN_PU, PTH3_IN,
+		PTH2_FN, PTH2_OUT, PTH2_IN_PU, PTH2_IN,
+		PTH1_FN, PTH1_OUT, PTH1_IN_PU, PTH1_IN,
+		PTH0_FN, PTH0_OUT, PTH0_IN_PU, PTH0_IN }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) {
+		PTJ7_FN, PTJ7_OUT, 0, 0,
+		PTJ6_FN, PTJ6_OUT, 0, 0,
+		PTJ5_FN, PTJ5_OUT, 0, 0,
+		0, 0, 0, 0,
+		PTJ3_FN, PTJ3_OUT, PTJ3_IN_PU, PTJ3_IN,
+		PTJ2_FN, PTJ2_OUT, PTJ2_IN_PU, PTJ2_IN,
+		PTJ1_FN, PTJ1_OUT, PTJ1_IN_PU, PTJ1_IN,
+		PTJ0_FN, PTJ0_OUT, PTJ0_IN_PU, PTJ0_IN }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) {
+		PTK7_FN, PTK7_OUT, PTK7_IN_PU, PTK7_IN,
+		PTK6_FN, PTK6_OUT, PTK6_IN_PU, PTK6_IN,
+		PTK5_FN, PTK5_OUT, PTK5_IN_PU, PTK5_IN,
+		PTK4_FN, PTK4_OUT, PTK4_IN_PU, PTK4_IN,
+		PTK3_FN, PTK3_OUT, PTK3_IN_PU, PTK3_IN,
+		PTK2_FN, PTK2_OUT, PTK2_IN_PU, PTK2_IN,
+		PTK1_FN, PTK1_OUT, PTK1_IN_PU, PTK1_IN,
+		PTK0_FN, PTK0_OUT, PTK0_IN_PU, PTK0_IN }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) {
+		PTL7_FN, PTL7_OUT, PTL7_IN_PU, PTL7_IN,
+		PTL6_FN, PTL6_OUT, PTL6_IN_PU, PTL6_IN,
+		PTL5_FN, PTL5_OUT, PTL5_IN_PU, PTL5_IN,
+		PTL4_FN, PTL4_OUT, PTL4_IN_PU, PTL4_IN,
+		PTL3_FN, PTL3_OUT, PTL3_IN_PU, PTL3_IN,
+		PTL2_FN, PTL2_OUT, PTL2_IN_PU, PTL2_IN,
+		PTL1_FN, PTL1_OUT, PTL1_IN_PU, PTL1_IN,
+		PTL0_FN, PTL0_OUT, PTL0_IN_PU, PTL0_IN }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) {
+		PTM7_FN, PTM7_OUT, PTM7_IN_PU, PTM7_IN,
+		PTM6_FN, PTM6_OUT, PTM6_IN_PU, PTM6_IN,
+		PTM5_FN, PTM5_OUT, PTM5_IN_PU, PTM5_IN,
+		PTM4_FN, PTM4_OUT, PTM4_IN_PU, PTM4_IN,
+		PTM3_FN, PTM3_OUT, PTM3_IN_PU, PTM3_IN,
+		PTM2_FN, PTM2_OUT, PTM2_IN_PU, PTM2_IN,
+		PTM1_FN, PTM1_OUT, PTM1_IN_PU, PTM1_IN,
+		PTM0_FN, PTM0_OUT, PTM0_IN_PU, PTM0_IN }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2) {
+		PTN7_FN, PTN7_OUT, PTN7_IN_PU, PTN7_IN,
+		PTN6_FN, PTN6_OUT, PTN6_IN_PU, PTN6_IN,
+		PTN5_FN, PTN5_OUT, PTN5_IN_PU, PTN5_IN,
+		PTN4_FN, PTN4_OUT, PTN4_IN_PU, PTN4_IN,
+		PTN3_FN, PTN3_OUT, PTN3_IN_PU, PTN3_IN,
+		PTN2_FN, PTN2_OUT, PTN2_IN_PU, PTN2_IN,
+		PTN1_FN, PTN1_OUT, PTN1_IN_PU, PTN1_IN,
+		PTN0_FN, PTN0_OUT, PTN0_IN_PU, PTN0_IN }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2) {
+		PTQ7_FN, PTQ7_OUT, PTQ7_IN_PU, PTQ7_IN,
+		PTQ6_FN, PTQ6_OUT, PTQ6_IN_PU, PTQ6_IN,
+		PTQ5_FN, PTQ5_OUT, PTQ5_IN_PU, PTQ5_IN,
+		PTQ4_FN, PTQ4_OUT, PTQ4_IN_PU, PTQ4_IN,
+		PTQ3_FN, PTQ3_OUT, PTQ3_IN_PU, PTQ3_IN,
+		PTQ2_FN, PTQ2_OUT, PTQ2_IN_PU, PTQ2_IN,
+		PTQ1_FN, PTQ1_OUT, PTQ1_IN_PU, PTQ1_IN,
+		PTQ0_FN, PTQ0_OUT, PTQ0_IN_PU, PTQ0_IN }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2) {
+		PTR7_FN, PTR7_OUT, PTR7_IN_PU, PTR7_IN,
+		PTR6_FN, PTR6_OUT, PTR6_IN_PU, PTR6_IN,
+		PTR5_FN, PTR5_OUT, PTR5_IN_PU, PTR5_IN,
+		PTR4_FN, PTR4_OUT, PTR4_IN_PU, PTR4_IN,
+		PTR3_FN, 0,        PTR3_IN_PU, PTR3_IN,
+		PTR2_FN, 0,        PTR2_IN_PU, PTR2_IN,
+		PTR1_FN, PTR1_OUT, PTR1_IN_PU, PTR1_IN,
+		PTR0_FN, PTR0_OUT, PTR0_IN_PU, PTR0_IN }
+	},
+	{ PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2) {
+		0, 0, 0, 0,
+		PTS6_FN, PTS6_OUT, PTS6_IN_PU, PTS6_IN,
+		PTS5_FN, PTS5_OUT, PTS5_IN_PU, PTS5_IN,
+		PTS4_FN, PTS4_OUT, PTS4_IN_PU, PTS4_IN,
+		PTS3_FN, PTS3_OUT, PTS3_IN_PU, PTS3_IN,
+		PTS2_FN, PTS2_OUT, PTS2_IN_PU, PTS2_IN,
+		PTS1_FN, PTS1_OUT, PTS1_IN_PU, PTS1_IN,
+		PTS0_FN, PTS0_OUT, PTS0_IN_PU, PTS0_IN }
+	},
+	{ PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2) {
+		PTT7_FN, PTT7_OUT, PTT7_IN_PU, PTT7_IN,
+		PTT6_FN, PTT6_OUT, PTT6_IN_PU, PTT6_IN,
+		PTT5_FN, PTT5_OUT, PTT5_IN_PU, PTT5_IN,
+		PTT4_FN, PTT4_OUT, PTT4_IN_PU, PTT4_IN,
+		PTT3_FN, PTT3_OUT, PTT3_IN_PU, PTT3_IN,
+		PTT2_FN, PTT2_OUT, PTT2_IN_PU, PTT2_IN,
+		PTT1_FN, PTT1_OUT, PTT1_IN_PU, PTT1_IN,
+		PTT0_FN, PTT0_OUT, PTT0_IN_PU, PTT0_IN }
+	},
+	{ PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2) {
+		PTU7_FN, PTU7_OUT, PTU7_IN_PU, PTU7_IN,
+		PTU6_FN, PTU6_OUT, PTU6_IN_PU, PTU6_IN,
+		PTU5_FN, PTU5_OUT, PTU5_IN_PU, PTU5_IN,
+		PTU4_FN, PTU4_OUT, PTU4_IN_PU, PTU4_IN,
+		PTU3_FN, PTU3_OUT, PTU3_IN_PU, PTU3_IN,
+		PTU2_FN, PTU2_OUT, PTU2_IN_PU, PTU2_IN,
+		PTU1_FN, PTU1_OUT, PTU1_IN_PU, PTU1_IN,
+		PTU0_FN, PTU0_OUT, PTU0_IN_PU, PTU0_IN }
+	},
+	{ PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2) {
+		PTV7_FN, PTV7_OUT, PTV7_IN_PU, PTV7_IN,
+		PTV6_FN, PTV6_OUT, PTV6_IN_PU, PTV6_IN,
+		PTV5_FN, PTV5_OUT, PTV5_IN_PU, PTV5_IN,
+		PTV4_FN, PTV4_OUT, PTV4_IN_PU, PTV4_IN,
+		PTV3_FN, PTV3_OUT, PTV3_IN_PU, PTV3_IN,
+		PTV2_FN, PTV2_OUT, PTV2_IN_PU, PTV2_IN,
+		PTV1_FN, PTV1_OUT, PTV1_IN_PU, PTV1_IN,
+		PTV0_FN, PTV0_OUT, PTV0_IN_PU, PTV0_IN }
+	},
+	{ PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2) {
+		PTW7_FN, PTW7_OUT, PTW7_IN_PU, PTW7_IN,
+		PTW6_FN, PTW6_OUT, PTW6_IN_PU, PTW6_IN,
+		PTW5_FN, PTW5_OUT, PTW5_IN_PU, PTW5_IN,
+		PTW4_FN, PTW4_OUT, PTW4_IN_PU, PTW4_IN,
+		PTW3_FN, PTW3_OUT, PTW3_IN_PU, PTW3_IN,
+		PTW2_FN, PTW2_OUT, PTW2_IN_PU, PTW2_IN,
+		PTW1_FN, PTW1_OUT, PTW1_IN_PU, PTW1_IN,
+		PTW0_FN, PTW0_OUT, PTW0_IN_PU, PTW0_IN }
+	},
+	{ PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2) {
+		PTX7_FN, PTX7_OUT, PTX7_IN_PU, PTX7_IN,
+		PTX6_FN, PTX6_OUT, PTX6_IN_PU, PTX6_IN,
+		PTX5_FN, PTX5_OUT, PTX5_IN_PU, PTX5_IN,
+		PTX4_FN, PTX4_OUT, PTX4_IN_PU, PTX4_IN,
+		PTX3_FN, PTX3_OUT, PTX3_IN_PU, PTX3_IN,
+		PTX2_FN, PTX2_OUT, PTX2_IN_PU, PTX2_IN,
+		PTX1_FN, PTX1_OUT, PTX1_IN_PU, PTX1_IN,
+		PTX0_FN, PTX0_OUT, PTX0_IN_PU, PTX0_IN }
+	},
+	{ PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2) {
+		PTY7_FN, PTY7_OUT, PTY7_IN_PU, PTY7_IN,
+		PTY6_FN, PTY6_OUT, PTY6_IN_PU, PTY6_IN,
+		PTY5_FN, PTY5_OUT, PTY5_IN_PU, PTY5_IN,
+		PTY4_FN, PTY4_OUT, PTY4_IN_PU, PTY4_IN,
+		PTY3_FN, PTY3_OUT, PTY3_IN_PU, PTY3_IN,
+		PTY2_FN, PTY2_OUT, PTY2_IN_PU, PTY2_IN,
+		PTY1_FN, PTY1_OUT, PTY1_IN_PU, PTY1_IN,
+		PTY0_FN, PTY0_OUT, PTY0_IN_PU, PTY0_IN }
+	},
+	{ PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2) {
+		PTZ7_FN, PTZ7_OUT, PTZ7_IN_PU, PTZ7_IN,
+		PTZ6_FN, PTZ6_OUT, PTZ6_IN_PU, PTZ6_IN,
+		PTZ5_FN, PTZ5_OUT, PTZ5_IN_PU, PTZ5_IN,
+		PTZ4_FN, PTZ4_OUT, PTZ4_IN_PU, PTZ4_IN,
+		PTZ3_FN, PTZ3_OUT, PTZ3_IN_PU, PTZ3_IN,
+		PTZ2_FN, PTZ2_OUT, PTZ2_IN_PU, PTZ2_IN,
+		PTZ1_FN, PTZ1_OUT, PTZ1_IN_PU, PTZ1_IN,
+		PTZ0_FN, PTZ0_OUT, PTZ0_IN_PU, PTZ0_IN }
+	},
+	{ PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1) {
+		PSA15_0, PSA15_1,
+		PSA14_0, PSA14_1,
+		PSA13_0, PSA13_1,
+		PSA12_0, PSA12_1,
+		0, 0,
+		PSA10_0, PSA10_1,
+		PSA9_0,  PSA9_1,
+		PSA8_0,  PSA8_1,
+		PSA7_0,  PSA7_1,
+		PSA6_0,  PSA6_1,
+		PSA5_0,  PSA5_1,
+		0, 0,
+		PSA3_0,  PSA3_1,
+		PSA2_0,  PSA2_1,
+		PSA1_0,  PSA1_1,
+		PSA0_0,  PSA0_1}
+	},
+	{ PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1) {
+		0, 0,
+		PSB14_0, PSB14_1,
+		PSB13_0, PSB13_1,
+		PSB12_0, PSB12_1,
+		PSB11_0, PSB11_1,
+		PSB10_0, PSB10_1,
+		PSB9_0,  PSB9_1,
+		PSB8_0,  PSB8_1,
+		PSB7_0,  PSB7_1,
+		PSB6_0,  PSB6_1,
+		PSB5_0,  PSB5_1,
+		PSB4_0,  PSB4_1,
+		PSB3_0,  PSB3_1,
+		PSB2_0,  PSB2_1,
+		PSB1_0,  PSB1_1,
+		PSB0_0,  PSB0_1}
+	},
+	{ PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1) {
+		PSC15_0, PSC15_1,
+		PSC14_0, PSC14_1,
+		PSC13_0, PSC13_1,
+		PSC12_0, PSC12_1,
+		PSC11_0, PSC11_1,
+		PSC10_0, PSC10_1,
+		PSC9_0,  PSC9_1,
+		PSC8_0,  PSC8_1,
+		PSC7_0,  PSC7_1,
+		PSC6_0,  PSC6_1,
+		PSC5_0,  PSC5_1,
+		PSC4_0,  PSC4_1,
+		0, 0,
+		PSC2_0,  PSC2_1,
+		PSC1_0,  PSC1_1,
+		PSC0_0,  PSC0_1}
+	},
+	{ PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1) {
+		PSD15_0, PSD15_1,
+		PSD14_0, PSD14_1,
+		PSD13_0, PSD13_1,
+		PSD12_0, PSD12_1,
+		PSD11_0, PSD11_1,
+		PSD10_0, PSD10_1,
+		PSD9_0,  PSD9_1,
+		PSD8_0,  PSD8_1,
+		PSD7_0,  PSD7_1,
+		PSD6_0,  PSD6_1,
+		PSD5_0,  PSD5_1,
+		PSD4_0,  PSD4_1,
+		PSD3_0,  PSD3_1,
+		PSD2_0,  PSD2_1,
+		PSD1_0,  PSD1_1,
+		PSD0_0,  PSD0_1}
+	},
+	{ PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1) {
+		PSE15_0, PSE15_1,
+		PSE14_0, PSE14_1,
+		PSE13_0, PSE13_1,
+		PSE12_0, PSE12_1,
+		PSE11_0, PSE11_1,
+		PSE10_0, PSE10_1,
+		PSE9_0,  PSE9_1,
+		PSE8_0,  PSE8_1,
+		PSE7_0,  PSE7_1,
+		PSE6_0,  PSE6_1,
+		PSE5_0,  PSE5_1,
+		PSE4_0,  PSE4_1,
+		PSE3_0,  PSE3_1,
+		PSE2_0,  PSE2_1,
+		PSE1_0,  PSE1_1,
+		PSE0_0,  PSE0_1}
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xa4050120, 8) {
+		PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+		PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xa4050122, 8) {
+		PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+		PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xa4050124, 8) {
+		PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+		PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xa4050126, 8) {
+		PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+		PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xa4050128, 8) {
+		PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+		PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xa405012a, 8) {
+		PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+		PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xa405012c, 8) {
+		0,         0,         PTG5_DATA, PTG4_DATA,
+		PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xa405012e, 8) {
+		PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+		PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xa4050130, 8) {
+		PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
+		PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xa4050132, 8) {
+		PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+		PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xa4050134, 8) {
+		PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+		PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xa4050136, 8) {
+		PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+		PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xa4050138, 8) {
+		PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+		PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xa405013a, 8) {
+		PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+		PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xa405013c, 8) {
+		PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+		PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+	},
+	{ PINMUX_DATA_REG("PSDR", 0xa405013e, 8) {
+		0,         PTS6_DATA, PTS5_DATA, PTS4_DATA,
+		PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+	},
+	{ PINMUX_DATA_REG("PTDR", 0xa4050160, 8) {
+		PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
+		PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PUDR", 0xa4050162, 8) {
+		PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+		PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+	},
+	{ PINMUX_DATA_REG("PVDR", 0xa4050164, 8) {
+		PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+		PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+	},
+	{ PINMUX_DATA_REG("PWDR", 0xa4050166, 8) {
+		PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+		PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+	},
+	{ PINMUX_DATA_REG("PXDR", 0xa4050168, 8) {
+		PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+		PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+	},
+	{ PINMUX_DATA_REG("PYDR", 0xa405016a, 8) {
+		PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+		PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+	},
+	{ PINMUX_DATA_REG("PZDR", 0xa405016c, 8) {
+		PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+		PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7724_pinmux_info = {
+	.name = "sh7724_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PTA7,
+	.last_gpio = GPIO_FN_INTC_IRQ0,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7724_pinmux_info);
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index c1549382c87..6307e087c86 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -12,7 +12,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
 #include <asm/clock.h>
 
 static struct resource iic0_resources[] = {
@@ -141,7 +141,7 @@ static struct platform_device jpu_device = {
 	.num_resources	= ARRAY_SIZE(jpu_resources),
 };
 
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
 	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
@@ -173,27 +173,123 @@ static struct platform_device cmt_device = {
 	.num_resources	= ARRAY_SIZE(cmt_resources),
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu0",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu0",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 80, 80, 80, 80 },
+		.clk		= "scif0",
 	}, {
 		.mapbase	= 0xffe10000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 81, 81, 81, 81 },
+		.clk		= "scif1",
 	}, {
 		.mapbase	= 0xffe20000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 82, 82, 82, 82 },
+		.clk		= "scif2",
 	}, {
 		.mapbase	= 0xffe30000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 83, 83, 83, 83 },
+		.clk		= "scif3",
 	}, {
 		.flags = 0,
 	}
@@ -209,6 +305,9 @@ static struct platform_device sci_device = {
 
 static struct platform_device *sh7343_devices[] __initdata = {
 	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&iic0_device,
 	&iic1_device,
 	&sci_device,
@@ -219,12 +318,6 @@ static struct platform_device *sh7343_devices[] __initdata = {
 
 static int __init sh7343_devices_setup(void)
 {
-	clk_always_enable("uram0"); /* URAM */
-	clk_always_enable("xymem0"); /* XYMEM */
-	clk_always_enable("veu0"); /* VEU */
-	clk_always_enable("vpu0"); /* VPU */
-	clk_always_enable("jpu0"); /* JPU */
-
 	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
 	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
 	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
@@ -234,6 +327,19 @@ static int __init sh7343_devices_setup(void)
 }
 __initcall(sh7343_devices_setup);
 
+static struct platform_device *sh7343_early_devices[] __initdata = {
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7343_early_devices,
+				   ARRAY_SIZE(sh7343_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 93ecf8ed5c6..318516f6bfa 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -14,7 +14,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
 #include <asm/clock.h>
 
 static struct resource iic_resources[] = {
@@ -148,7 +148,7 @@ static struct platform_device veu1_device = {
 	.num_resources	= ARRAY_SIZE(veu1_resources),
 };
 
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
 	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
@@ -180,12 +180,105 @@ static struct platform_device cmt_device = {
 	.num_resources	= ARRAY_SIZE(cmt_resources),
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu0",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu0",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 80, 80, 80, 80 },
+		.clk		= "scif0",
 	}, {
 		.flags = 0,
 	}
@@ -201,6 +294,9 @@ static struct platform_device sci_device = {
 
 static struct platform_device *sh7366_devices[] __initdata = {
 	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&iic_device,
 	&sci_device,
 	&usb_host_device,
@@ -211,12 +307,6 @@ static struct platform_device *sh7366_devices[] __initdata = {
 
 static int __init sh7366_devices_setup(void)
 {
-	clk_always_enable("rsmem0"); /* RSMEM */
-	clk_always_enable("xymem0"); /* XYMEM */
-	clk_always_enable("veu1"); /* VEU-2 */
-	clk_always_enable("veu0"); /* VEU-1 */
-	clk_always_enable("vpu0"); /* VPU */
-
 	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
 	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
 	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
@@ -226,6 +316,19 @@ static int __init sh7366_devices_setup(void)
 }
 __initcall(sh7366_devices_setup);
 
+static struct platform_device *sh7366_early_devices[] __initdata = {
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7366_early_devices,
+				   ARRAY_SIZE(sh7366_early_devices));
+}
+
 enum {
 	UNUSED=0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 406747f07dc..ea524a2da3e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -13,7 +13,7 @@
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
 #include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 
@@ -177,13 +177,13 @@ static struct platform_device jpu_device = {
 	.num_resources	= ARRAY_SIZE(jpu_resources),
 };
 
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
 	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
 	.clk = "cmt0",
 	.clockevent_rating = 125,
-	.clocksource_rating = 200,
+	.clocksource_rating = 125,
 };
 
 static struct resource cmt_resources[] = {
@@ -209,24 +209,119 @@ static struct platform_device cmt_device = {
 	.num_resources	= ARRAY_SIZE(cmt_resources),
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu0",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu0",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 80, 80, 80, 80 },
+		.clk		= "scif0",
 	},
 	{
 		.mapbase	= 0xffe10000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 81, 81, 81, 81 },
+		.clk		= "scif1",
 	},
 	{
 		.mapbase	= 0xffe20000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 82, 82, 82, 82 },
+		.clk		= "scif2",
 	},
 	{
 		.flags = 0,
@@ -243,6 +338,9 @@ static struct platform_device sci_device = {
 
 static struct platform_device *sh7722_devices[] __initdata = {
 	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&rtc_device,
 	&usbf_device,
 	&iic_device,
@@ -254,12 +352,6 @@ static struct platform_device *sh7722_devices[] __initdata = {
 
 static int __init sh7722_devices_setup(void)
 {
-	clk_always_enable("uram0"); /* URAM */
-	clk_always_enable("xymem0"); /* XYMEM */
-	clk_always_enable("veu0"); /* VEU */
-	clk_always_enable("vpu0"); /* VPU */
-	clk_always_enable("jpu0"); /* JPU */
-
 	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
 	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
 	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
@@ -269,6 +361,19 @@ static int __init sh7722_devices_setup(void)
 }
 __initcall(sh7722_devices_setup);
 
+static struct platform_device *sh7722_early_devices[] __initdata = {
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7722_early_devices,
+				   ARRAY_SIZE(sh7722_early_devices));
+}
+
 enum {
 	UNUSED=0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a800466b938..d8f4a13aeff 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -13,7 +13,8 @@
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 
@@ -101,13 +102,13 @@ static struct platform_device veu1_device = {
 	.num_resources	= ARRAY_SIZE(veu1_resources),
 };
 
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
 	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
 	.clk = "cmt0",
 	.clockevent_rating = 125,
-	.clocksource_rating = 200,
+	.clocksource_rating = 125,
 };
 
 static struct resource cmt_resources[] = {
@@ -133,37 +134,225 @@ static struct platform_device cmt_device = {
 	.num_resources	= ARRAY_SIZE(cmt_resources),
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu0",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu0",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu1",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffd90008,
+		.end	= 0xffd90013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 57,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu1",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffd90014,
+		.end	= 0xffd9001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 58,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu1",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffd90020,
+		.end	= 0xffd9002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 57,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase        = 0xffe00000,
 		.flags          = UPF_BOOT_AUTOCONF,
 		.type           = PORT_SCIF,
 		.irqs           = { 80, 80, 80, 80 },
+		.clk		= "scif0",
 	},{
 		.mapbase        = 0xffe10000,
 		.flags          = UPF_BOOT_AUTOCONF,
 		.type           = PORT_SCIF,
 		.irqs           = { 81, 81, 81, 81 },
+		.clk		= "scif1",
 	},{
 		.mapbase        = 0xffe20000,
 		.flags          = UPF_BOOT_AUTOCONF,
 		.type           = PORT_SCIF,
 		.irqs           = { 82, 82, 82, 82 },
+		.clk		= "scif2",
 	},{
 		.mapbase	= 0xa4e30000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIFA,
 		.irqs		= { 56, 56, 56, 56 },
+		.clk		= "scif3",
 	},{
 		.mapbase	= 0xa4e40000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIFA,
 		.irqs		= { 88, 88, 88, 88 },
+		.clk		= "scif4",
 	},{
 		.mapbase	= 0xa4e50000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIFA,
 		.irqs		= { 109, 109, 109, 109 },
+		.clk		= "scif5",
 	}, {
 		.flags = 0,
 	}
@@ -255,6 +444,12 @@ static struct platform_device iic_device = {
 
 static struct platform_device *sh7723_devices[] __initdata = {
 	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
 	&sci_device,
 	&rtc_device,
 	&iic_device,
@@ -266,11 +461,6 @@ static struct platform_device *sh7723_devices[] __initdata = {
 
 static int __init sh7723_devices_setup(void)
 {
-	clk_always_enable("meram0"); /* MERAM */
-	clk_always_enable("veu1"); /* VEU2H1 */
-	clk_always_enable("veu0"); /* VEU2H0 */
-	clk_always_enable("vpu0"); /* VPU */
-
 	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
 	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
 	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
@@ -280,6 +470,31 @@ static int __init sh7723_devices_setup(void)
 }
 __initcall(sh7723_devices_setup);
 
+static struct platform_device *sh7723_early_devices[] __initdata = {
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7723_early_devices,
+				   ARRAY_SIZE(sh7723_early_devices));
+}
+
+#define RAMCR_CACHE_L2FC	0x0002
+#define RAMCR_CACHE_L2E		0x0001
+#define L2_CACHE_ENABLE		(RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
+void __uses_jump_to_uncached l2_cache_init(void)
+{
+	/* Enable L2 cache */
+	ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+}
+
 enum {
 	UNUSED=0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
new file mode 100644
index 00000000000..e5ac9eb11c6
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -0,0 +1,786 @@
+/*
+ * SH7724 Setup
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Setup
+ * Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/mmzone.h>
+
+/* Serial */
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase        = 0xffe00000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 80, 80, 80, 80 },
+		.clk		= "scif0",
+	}, {
+		.mapbase        = 0xffe10000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 81, 81, 81, 81 },
+		.clk		= "scif1",
+	}, {
+		.mapbase        = 0xffe20000,
+		.flags          = UPF_BOOT_AUTOCONF,
+		.type           = PORT_SCIF,
+		.irqs           = { 82, 82, 82, 82 },
+		.clk		= "scif2",
+	}, {
+		.mapbase	= 0xa4e30000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIFA,
+		.irqs		= { 56, 56, 56, 56 },
+		.clk		= "scif3",
+	}, {
+		.mapbase	= 0xa4e40000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIFA,
+		.irqs		= { 88, 88, 88, 88 },
+		.clk		= "scif4",
+	}, {
+		.mapbase	= 0xa4e50000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIFA,
+		.irqs		= { 109, 109, 109, 109 },
+		.clk		= "scif5",
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+/* RTC */
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 69,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 70,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 68,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+/* I2C0 */
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470018 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+/* I2C1 */
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750018 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 92,
+		.end    = 95,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 1, /* "i2c1" clock */
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+/* VPU */
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5F",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+/* VEU0 */
+static struct uio_info veu0_platform_data = {
+	.name = "VEU3F0",
+	.version = "0",
+	.irq = 83,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU3F0",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200cb - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+/* VEU1 */
+static struct uio_info veu1_platform_data = {
+	.name = "VEU3F1",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU3F1",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240cb - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.name = "CMT",
+	.channel_offset = 0x60,
+	.timer_bit = 5,
+	.clk = "cmt0",
+	.clockevent_rating = 125,
+	.clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+	[0] = {
+		.name	= "CMT",
+		.start	= 0x044a0060,
+		.end	= 0x044a006b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu0",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu0",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu1",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffd90008,
+		.end	= 0xffd90013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 57,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu1",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffd90014,
+		.end	= 0xffd9001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 58,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu1",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffd90020,
+		.end	= 0xffd9002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 57,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
+/* JPU */
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfe980000,
+		.end	= 0xfe9902d3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
+static struct platform_device *sh7724_devices[] __initdata = {
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+	&sci_device,
+	&rtc_device,
+	&iic0_device,
+	&iic1_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
+	&jpu_device,
+};
+
+static int __init sh7724_devices_setup(void)
+{
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+	platform_resource_setup_memory(&jpu_device,  "jpu",  2 << 20);
+
+	return platform_add_devices(sh7724_devices,
+				    ARRAY_SIZE(sh7724_devices));
+}
+device_initcall(sh7724_devices_setup);
+
+static struct platform_device *sh7724_early_devices[] __initdata = {
+	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7724_early_devices,
+				   ARRAY_SIZE(sh7724_early_devices));
+}
+
+#define RAMCR_CACHE_L2FC	0x0002
+#define RAMCR_CACHE_L2E		0x0001
+#define L2_CACHE_ENABLE		(RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
+void __uses_jump_to_uncached l2_cache_init(void)
+{
+	/* Enable L2 cache */
+	ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	HUDI,
+	DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
+	_2DG_TRI, _2DG_INI, _2DG_CEI,
+	DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
+	VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU,
+	SCIFA3,
+	VPU,
+	TPU,
+	CEU1,
+	BEU1,
+	USB0, USB1,
+	ATAPI,
+	RTC_ATI, RTC_PRI, RTC_CUI,
+	DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
+	DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
+	KEYSC,
+	SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
+	VEU0,
+	MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+	SPU_SPUI0, SPU_SPUI1,
+	SCIFA4,
+	ICB,
+	ETHI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, SDHI0_SDHII3,
+	CMT,
+	TSIF,
+	FSI,
+	SCIFA5,
+	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+	IRDA,
+	SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2,
+	JPU,
+	_2DDMAC,
+	MMC_MMC2I, MMC_MMC3I,
+	LCDC,
+	TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+
+	/* interrupt groups */
+	DMAC1A, _2DG, DMAC0A, VIO, USB, RTC,
+	DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMCIF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+	INTC_VECT(DMAC1A_DEI0, 0x700),
+	INTC_VECT(DMAC1A_DEI1, 0x720),
+	INTC_VECT(DMAC1A_DEI2, 0x740),
+	INTC_VECT(DMAC1A_DEI3, 0x760),
+
+	INTC_VECT(_2DG_TRI, 0x780),
+	INTC_VECT(_2DG_INI, 0x7A0),
+	INTC_VECT(_2DG_CEI, 0x7C0),
+
+	INTC_VECT(DMAC0A_DEI0, 0x800),
+	INTC_VECT(DMAC0A_DEI1, 0x820),
+	INTC_VECT(DMAC0A_DEI2, 0x840),
+	INTC_VECT(DMAC0A_DEI3, 0x860),
+
+	INTC_VECT(VIO_CEU0, 0x880),
+	INTC_VECT(VIO_BEU0, 0x8A0),
+	INTC_VECT(VIO_VEU1, 0x8C0),
+	INTC_VECT(VIO_VOU,  0x8E0),
+
+	INTC_VECT(SCIFA3, 0x900),
+	INTC_VECT(VPU,    0x980),
+	INTC_VECT(TPU,    0x9A0),
+	INTC_VECT(CEU1,   0x9E0),
+	INTC_VECT(BEU1,   0xA00),
+	INTC_VECT(USB0,   0xA20),
+	INTC_VECT(USB1,   0xA40),
+	INTC_VECT(ATAPI,  0xA60),
+
+	INTC_VECT(RTC_ATI, 0xA80),
+	INTC_VECT(RTC_PRI, 0xAA0),
+	INTC_VECT(RTC_CUI, 0xAC0),
+
+	INTC_VECT(DMAC1B_DEI4, 0xB00),
+	INTC_VECT(DMAC1B_DEI5, 0xB20),
+	INTC_VECT(DMAC1B_DADERR, 0xB40),
+
+	INTC_VECT(DMAC0B_DEI4, 0xB80),
+	INTC_VECT(DMAC0B_DEI5, 0xBA0),
+	INTC_VECT(DMAC0B_DADERR, 0xBC0),
+
+	INTC_VECT(KEYSC,      0xBE0),
+	INTC_VECT(SCIF_SCIF0, 0xC00),
+	INTC_VECT(SCIF_SCIF1, 0xC20),
+	INTC_VECT(SCIF_SCIF2, 0xC40),
+	INTC_VECT(VEU0,       0xC60),
+	INTC_VECT(MSIOF_MSIOFI0, 0xC80),
+	INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
+	INTC_VECT(SPU_SPUI0, 0xCC0),
+	INTC_VECT(SPU_SPUI1, 0xCE0),
+	INTC_VECT(SCIFA4,    0xD00),
+
+	INTC_VECT(ICB,  0xD20),
+	INTC_VECT(ETHI, 0xD60),
+
+	INTC_VECT(I2C1_ALI, 0xD80),
+	INTC_VECT(I2C1_TACKI, 0xDA0),
+	INTC_VECT(I2C1_WAITI, 0xDC0),
+	INTC_VECT(I2C1_DTEI, 0xDE0),
+
+	INTC_VECT(I2C0_ALI, 0xE00),
+	INTC_VECT(I2C0_TACKI, 0xE20),
+	INTC_VECT(I2C0_WAITI, 0xE40),
+	INTC_VECT(I2C0_DTEI, 0xE60),
+
+	INTC_VECT(SDHI0_SDHII0, 0xE80),
+	INTC_VECT(SDHI0_SDHII1, 0xEA0),
+	INTC_VECT(SDHI0_SDHII2, 0xEC0),
+	INTC_VECT(SDHI0_SDHII3, 0xEE0),
+
+	INTC_VECT(CMT,    0xF00),
+	INTC_VECT(TSIF,   0xF20),
+	INTC_VECT(FSI,    0xF80),
+	INTC_VECT(SCIFA5, 0xFA0),
+
+	INTC_VECT(TMU0_TUNI0, 0x400),
+	INTC_VECT(TMU0_TUNI1, 0x420),
+	INTC_VECT(TMU0_TUNI2, 0x440),
+
+	INTC_VECT(IRDA,    0x480),
+
+	INTC_VECT(SDHI1_SDHII0, 0x4E0),
+	INTC_VECT(SDHI1_SDHII1, 0x500),
+	INTC_VECT(SDHI1_SDHII2, 0x520),
+
+	INTC_VECT(JPU, 0x560),
+	INTC_VECT(_2DDMAC, 0x4A0),
+
+	INTC_VECT(MMC_MMC2I, 0x5A0),
+	INTC_VECT(MMC_MMC3I, 0x5C0),
+
+	INTC_VECT(LCDC, 0xF40),
+
+	INTC_VECT(TMU1_TUNI0, 0x920),
+	INTC_VECT(TMU1_TUNI1, 0x940),
+	INTC_VECT(TMU1_TUNI2, 0x960),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
+	INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI),
+	INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
+	INTC_GROUP(VIO, VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU),
+	INTC_GROUP(USB, USB0, USB1),
+	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+	INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
+	INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SDHI0, SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, SDHI0_SDHII3),
+	INTC_GROUP(SDHI1, SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2),
+	INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
+	INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+	    0, SDHI1_SDHII2, SDHI1_SDHII1, SDHI1_SDHII0 } },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
+	    DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, ATAPI, ETHI, 0, SCIFA3 } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
+	    SPU_SPUI1, SPU_SPUI0, BEU1, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
+	    JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
+	    VEU0, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, ICB, SCIFA4,
+	    CEU1, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { SDHI0_SDHII3, SDHI0_SDHII2, SDHI0_SDHII1, SDHI0_SDHII0,
+	    0, 0, SCIFA5, FSI } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
+	    0, RTC_CUI, RTC_PRI, RTC_ATI } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0, _2DG_CEI, _2DG_INI, _2DG_TRI,
+	    0, TPU, 0, TSIF } },
+	{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+	  { 0, 0, MMC_MMC3I, MMC_MMC2I, 0, 0, 0, _2DDMAC } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
+					     TMU0_TUNI2, IRDA } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, DMAC1A, BEU1 } },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
+					     TMU1_TUNI2, SPU } },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMCIF, 0, ATAPI } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA3, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC0B, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
+					     SCIF_SCIF2, VEU0 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+					     I2C1, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA4, ICB, TSIF, _2DG } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU1, ETHI, FSI, SDHI1 } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, 0, SDHI0 } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA5, 0, TPU, _2DDMAC } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7724", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index bdf0f61ae1e..f1e0c0d36da 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/sh_timer.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
 
@@ -113,7 +114,195 @@ static struct platform_device usbf_device = {
 	.resource	= usbf_resources,
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffd88008,
+		.end	= 0xffd88013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 96,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffd88014,
+		.end	= 0xffd8801f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 97,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffd88020,
+		.end	= 0xffd8802b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 98,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
 static struct platform_device *sh7763_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
 	&rtc_device,
 	&sci_device,
 	&usb_ohci_device,
@@ -127,6 +316,21 @@ static int __init sh7763_devices_setup(void)
 }
 __initcall(sh7763_devices_setup);
 
+static struct platform_device *sh7763_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7763_early_devices,
+				   ARRAY_SIZE(sh7763_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index b73578ee295..1e86209db28 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -11,6 +11,8 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -76,7 +78,288 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffd81008,
+		.end	= 0xffd81013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 19,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffd81014,
+		.end	= 0xffd8101f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 20,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffd81020,
+		.end	= 0xffd8102f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
+static struct sh_timer_config tmu6_platform_data = {
+	.name = "TMU6",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu6_resources[] = {
+	[0] = {
+		.name	= "TMU6",
+		.start	= 0xffd82008,
+		.end	= 0xffd82013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 22,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu6_device = {
+	.name		= "sh_tmu",
+	.id		= 6,
+	.dev = {
+		.platform_data	= &tmu6_platform_data,
+	},
+	.resource	= tmu6_resources,
+	.num_resources	= ARRAY_SIZE(tmu6_resources),
+};
+
+static struct sh_timer_config tmu7_platform_data = {
+	.name = "TMU7",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu7_resources[] = {
+	[0] = {
+		.name	= "TMU7",
+		.start	= 0xffd82014,
+		.end	= 0xffd8201f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 23,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu7_device = {
+	.name		= "sh_tmu",
+	.id		= 7,
+	.dev = {
+		.platform_data	= &tmu7_platform_data,
+	},
+	.resource	= tmu7_resources,
+	.num_resources	= ARRAY_SIZE(tmu7_resources),
+};
+
+static struct sh_timer_config tmu8_platform_data = {
+	.name = "TMU8",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu8_resources[] = {
+	[0] = {
+		.name	= "TMU8",
+		.start	= 0xffd82020,
+		.end	= 0xffd8202b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 24,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu8_device = {
+	.name		= "sh_tmu",
+	.id		= 8,
+	.dev = {
+		.platform_data	= &tmu8_platform_data,
+	},
+	.resource	= tmu8_resources,
+	.num_resources	= ARRAY_SIZE(tmu8_resources),
+};
+
 static struct platform_device *sh7770_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+	&tmu6_device,
+	&tmu7_device,
+	&tmu8_device,
 	&sci_device,
 };
 
@@ -87,6 +370,269 @@ static int __init sh7770_devices_setup(void)
 }
 __initcall(sh7770_devices_setup);
 
+static struct platform_device *sh7770_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+	&tmu6_device,
+	&tmu7_device,
+	&tmu8_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7770_early_devices,
+				   ARRAY_SIZE(sh7770_early_devices));
+}
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+
+	GPIO,
+	TMU0, TMU1, TMU2, TMU2_TICPI,
+	TMU3, TMU4, TMU5, TMU5_TICPI,
+	TMU6, TMU7, TMU8,
+	HAC, IPI, SPDIF, HUDI, I2C,
+	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+	I2S0, I2S1, I2S2, I2S3,
+	SRC_RX, SRC_TX, SRC_SPDIF,
+	DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D,
+	GFX3D_MBX, GFX3D_DMAC,
+	EXBUS_ATA,
+	SPI0, SPI1,
+	SCIF089, SCIF1234, SCIF567,
+	ADC,
+	BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
+	BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
+	BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31,
+
+	/* interrupt groups */
+	TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(GPIO, 0x3e0),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+	INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0),
+	INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0),
+	INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520),
+	INTC_VECT(TMU8, 0x540),
+	INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0),
+	INTC_VECT(SPDIF, 0x5e0),
+	INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620),
+	INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
+	INTC_VECT(DMAC0_DMINT2, 0x680),
+	INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0),
+	INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700),
+	INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740),
+	INTC_VECT(SRC_SPDIF, 0x760),
+	INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0),
+	INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0),
+	INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860),
+	INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0),
+	INTC_VECT(GFX2D, 0x8c0),
+	INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920),
+	INTC_VECT(EXBUS_ATA, 0x940),
+	INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980),
+	INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0),
+	INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00),
+	INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40),
+	INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80),
+	INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0),
+	INTC_VECT(ADC, 0xb20),
+	INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0),
+	INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00),
+	INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40),
+	INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80),
+	INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0),
+	INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00),
+	INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40),
+	INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80),
+	INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0),
+	INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00),
+	INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40),
+	INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80),
+	INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0),
+	INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00),
+	INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40),
+	INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
+		   TMU5_TICPI, TMU6, TMU7, TMU8),
+	INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2),
+	INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3),
+	INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF),
+	INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC),
+	INTC_GROUP(SPI, SPI0, SPI1),
+	INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567),
+	INTC_GROUP(BBDMAC,
+		   BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
+		   BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
+		   BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D,
+	    GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S,
+	    DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
+	{ 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } },
+	{ 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } },
+	{ 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } },
+	{ 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } },
+	{ 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } },
+	{ 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } },
+	{ 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } },
+	{ 0xffe00020, 0, 32, 8, /* INT2PRI8 */
+	  { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } },
+	{ 0xffe00024, 0, 32, 8, /* INT2PRI9 */
+	  { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } },
+	{ 0xffe00028, 0, 32, 8, /* INT2PRI10 */
+	  { BBDMAC_29, BBDMAC_30, BBDMAC_31 } },
+	{ 0xffe0002c, 0, 32, 8, /* INT2PRI11 */
+	  { TMU1, TMU2, TMU2_TICPI, TMU3 } },
+	{ 0xffe00030, 0, 32, 8, /* INT2PRI12 */
+	  { TMU4, TMU5, TMU5_TICPI, TMU6 } },
+	{ 0xffe00034, 0, 32, 8, /* INT2PRI13 */
+	  { TMU7, TMU8 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect irq_vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+};
+
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } },
+};
+
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+	{ 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+					       IRQ4, IRQ5, } },
+};
+
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, } },
+};
+
+static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors,
+			 NULL, irq_mask_registers, irq_prio_registers,
+			 irq_sense_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect irl_vectors[] __initdata = {
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
+			 NULL, irl7654_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
+			 NULL, irl3210_mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
 void __init plat_irq_setup(void)
 {
+	/* disable IRQ7-0 */
+	ctrl_outl(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	ctrl_outl(0xc0000000, INTC_INTMSK1);
+	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		/* select IRQ mode for IRL3-0 + IRL7-4 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		register_intc_controller(&intc_irq_desc);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl7654_desc);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl3210_desc);
+		break;
+	default:
+		BUG();
+	}
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 6f7227cd65b..715e05b431e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -12,6 +12,189 @@
 #include <linux/serial.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffdc0008,
+		.end	= 0xffdc0013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 96,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffdc0014,
+		.end	= 0xffdc001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 97,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffdc0020,
+		.end	= 0xffdc002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 98,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
 
 static struct resource rtc_resources[] = {
 	[0] = {
@@ -58,6 +241,12 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7780_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
 	&rtc_device,
 	&sci_device,
 };
@@ -69,6 +258,21 @@ static int __init sh7780_devices_setup(void)
 }
 __initcall(sh7780_devices_setup);
 
+static struct platform_device *sh7780_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7780_early_devices,
+				   ARRAY_SIZE(sh7780_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index d80802a49db..af561402570 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -13,39 +13,228 @@
 #include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/sh_timer.h>
 #include <asm/mmzone.h>
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu012_fck",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu012_fck",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu012_fck",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu345_fck",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffdc0008,
+		.end	= 0xffdc0013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 96,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu345_fck",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffdc0014,
+		.end	= 0xffdc001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 97,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu345_fck",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffdc0020,
+		.end	= 0xffdc002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 98,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffea0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 40, 40, 40, 40 },
+		.clk		= "scif_fck",
 	}, {
 		.mapbase	= 0xffeb0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 44, 44, 44, 44 },
+		.clk		= "scif_fck",
 	}, {
 		.mapbase	= 0xffec0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 60, 60, 60, 60 },
+		.clk		= "scif_fck",
 	}, {
 		.mapbase	= 0xffed0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 61, 61, 61, 61 },
+		.clk		= "scif_fck",
 	}, {
 		.mapbase	= 0xffee0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 62, 62, 62, 62 },
+		.clk		= "scif_fck",
 	}, {
 		.mapbase	= 0xffef0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 63, 63, 63, 63 },
+		.clk		= "scif_fck",
 	}, {
 		.flags = 0,
 	}
@@ -60,6 +249,12 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7785_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
 	&sci_device,
 };
 
@@ -70,6 +265,21 @@ static int __init sh7785_devices_setup(void)
 }
 __initcall(sh7785_devices_setup);
 
+static struct platform_device *sh7785_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7785_early_devices,
+				   ARRAY_SIZE(sh7785_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 90e8cfff55f..93e0d2c017e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2009  Renesas Solutions Corp.
  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Paul Mundt <paul.mundt@renesas.com>
  *
  * Based on SH7785 Setup
  *
@@ -19,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
+#include <linux/sh_timer.h>
 #include <asm/mmzone.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -69,6 +71,368 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffda0008,
+		.end	= 0xffda0013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 20,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffda0014,
+		.end	= 0xffda001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffda0020,
+		.end	= 0xffda002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 22,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
+static struct sh_timer_config tmu6_platform_data = {
+	.name = "TMU6",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu6_resources[] = {
+	[0] = {
+		.name	= "TMU6",
+		.start	= 0xffdc0008,
+		.end	= 0xffdc0013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 45,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu6_device = {
+	.name		= "sh_tmu",
+	.id		= 6,
+	.dev = {
+		.platform_data	= &tmu6_platform_data,
+	},
+	.resource	= tmu6_resources,
+	.num_resources	= ARRAY_SIZE(tmu6_resources),
+};
+
+static struct sh_timer_config tmu7_platform_data = {
+	.name = "TMU7",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu7_resources[] = {
+	[0] = {
+		.name	= "TMU7",
+		.start	= 0xffdc0014,
+		.end	= 0xffdc001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 45,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu7_device = {
+	.name		= "sh_tmu",
+	.id		= 7,
+	.dev = {
+		.platform_data	= &tmu7_platform_data,
+	},
+	.resource	= tmu7_resources,
+	.num_resources	= ARRAY_SIZE(tmu7_resources),
+};
+
+static struct sh_timer_config tmu8_platform_data = {
+	.name = "TMU8",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu8_resources[] = {
+	[0] = {
+		.name	= "TMU8",
+		.start	= 0xffdc0020,
+		.end	= 0xffdc002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 45,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu8_device = {
+	.name		= "sh_tmu",
+	.id		= 8,
+	.dev = {
+		.platform_data	= &tmu8_platform_data,
+	},
+	.resource	= tmu8_resources,
+	.num_resources	= ARRAY_SIZE(tmu8_resources),
+};
+
+static struct sh_timer_config tmu9_platform_data = {
+	.name = "TMU9",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu9_resources[] = {
+	[0] = {
+		.name	= "TMU9",
+		.start	= 0xffde0008,
+		.end	= 0xffde0013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 46,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu9_device = {
+	.name		= "sh_tmu",
+	.id		= 9,
+	.dev = {
+		.platform_data	= &tmu9_platform_data,
+	},
+	.resource	= tmu9_resources,
+	.num_resources	= ARRAY_SIZE(tmu9_resources),
+};
+
+static struct sh_timer_config tmu10_platform_data = {
+	.name = "TMU10",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu10_resources[] = {
+	[0] = {
+		.name	= "TMU10",
+		.start	= 0xffde0014,
+		.end	= 0xffde001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 46,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu10_device = {
+	.name		= "sh_tmu",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &tmu10_platform_data,
+	},
+	.resource	= tmu10_resources,
+	.num_resources	= ARRAY_SIZE(tmu10_resources),
+};
+
+static struct sh_timer_config tmu11_platform_data = {
+	.name = "TMU11",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu11_resources[] = {
+	[0] = {
+		.name	= "TMU11",
+		.start	= 0xffde0020,
+		.end	= 0xffde002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 46,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu11_device = {
+	.name		= "sh_tmu",
+	.id		= 11,
+	.dev = {
+		.platform_data	= &tmu11_platform_data,
+	},
+	.resource	= tmu11_resources,
+	.num_resources	= ARRAY_SIZE(tmu11_resources),
+};
+
 static struct resource usb_ohci_resources[] = {
 	[0] = {
 		.start	= 0xffe70400,
@@ -94,6 +458,21 @@ static struct platform_device usb_ohci_device = {
 	.resource	= usb_ohci_resources,
 };
 
+static struct platform_device *sh7786_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+	&tmu6_device,
+	&tmu7_device,
+	&tmu8_device,
+	&tmu9_device,
+	&tmu10_device,
+	&tmu11_device,
+};
+
 static struct platform_device *sh7786_devices[] __initdata = {
 	&sci_device,
 	&usb_ohci_device,
@@ -156,12 +535,26 @@ static void __init sh7786_usb_setup(void)
 
 static int __init sh7786_devices_setup(void)
 {
+	int ret;
+
 	sh7786_usb_setup();
+
+	ret = platform_add_devices(sh7786_early_devices,
+				   ARRAY_SIZE(sh7786_early_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
 	return platform_add_devices(sh7786_devices,
 				    ARRAY_SIZE(sh7786_devices));
 }
 device_initcall(sh7786_devices_setup);
 
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7786_early_devices,
+				   ARRAY_SIZE(sh7786_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index bd35f32534b..53c65fd9cce 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -1,7 +1,7 @@
 /*
- * SH-X3 Setup
+ * SH-X3 Prototype Setup
  *
- *  Copyright (C) 2007  Paul Mundt
+ *  Copyright (C) 2007 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,6 +12,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/io.h>
+#include <linux/sh_timer.h>
 #include <asm/mmzone.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -48,17 +49,221 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffc10008,
+		.end	= 0xffc10013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffc10014,
+		.end	= 0xffc1001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffc10020,
+		.end	= 0xffc1002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffc20008,
+		.end	= 0xffc20013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 19,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffc20014,
+		.end	= 0xffc2001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 20,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffc20020,
+		.end	= 0xffc2002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
+static struct platform_device *shx3_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
 static struct platform_device *shx3_devices[] __initdata = {
 	&sci_device,
 };
 
 static int __init shx3_devices_setup(void)
 {
+	int ret;
+
+	ret = platform_add_devices(shx3_early_devices,
+				   ARRAY_SIZE(shx3_early_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
 	return platform_add_devices(shx3_devices,
 				    ARRAY_SIZE(shx3_devices));
 }
 __initcall(shx3_devices_setup);
 
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(shx3_early_devices,
+				   ARRAY_SIZE(shx3_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 
diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile
index ce4602ea23a..a184a31e686 100644
--- a/arch/sh/kernel/cpu/sh5/Makefile
+++ b/arch/sh/kernel/cpu/sh5/Makefile
@@ -6,6 +6,9 @@ obj-y := entry.o probe.o switchto.o
 obj-$(CONFIG_SH_FPU)		+= fpu.o
 obj-$(CONFIG_KALLSYMS)		+= unwind.o
 
+# CPU subtype setup
+obj-$(CONFIG_CPU_SH5)		+= setup-sh5.o
+
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH5)		:= clock-sh5.o
 
diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c
index 52c49248833..7f864ebc51d 100644
--- a/arch/sh/kernel/cpu/sh5/clock-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/clock-sh5.c
@@ -32,30 +32,30 @@ static struct clk_ops sh5_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(cprc_base) >> 12) & 0x0007;
-	clk->rate = clk->parent->rate / ifc_table[idx];
+	return clk->parent->rate / ifc_table[idx];
 }
 
 static struct clk_ops sh5_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(cprc_base) >> 3) & 0x0007;
-	clk->rate = clk->parent->rate / ifc_table[idx];
+	return clk->parent->rate / ifc_table[idx];
 }
 
 static struct clk_ops sh5_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
 {
 	int idx = (ctrl_inw(cprc_base) & 0x0007);
-	clk->rate = clk->parent->rate / ifc_table[idx];
+	return clk->parent->rate / ifc_table[idx];
 }
 
 static struct clk_ops sh5_cpu_clk_ops = {
@@ -71,7 +71,7 @@ static struct clk_ops *sh5_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
-	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+	cprc_base = (unsigned long)ioremap_nocache(CPRC_BASE, 1024);
 	BUG_ON(!cprc_base);
 
 	if (idx < ARRAY_SIZE(sh5_clk_ops))
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 7e49cb812f8..b0aacf67525 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -812,27 +812,6 @@ no_underflow:
 	! exceptions
 	add	SP, ZERO, r14
 
-#ifdef CONFIG_POOR_MANS_STRACE
-	/* We've pushed all the registers now, so only r2-r4 hold anything
-	 * useful. Move them into callee save registers */
-	or	r2, ZERO, r28
-	or	r3, ZERO, r29
-	or	r4, ZERO, r30
-
-	/* Preserve r2 as the event code */
-	movi	evt_debug, r3
-	ori	r3, 1, r3
-	ptabs	r3, tr0
-
-	or	SP, ZERO, r6
-	getcon	TRA, r5
-	blink	tr0, LINK
-
-	or	r28, ZERO, r2
-	or	r29, ZERO, r3
-	or	r30, ZERO, r4
-#endif
-
 	/* For syscall and debug race condition, get TRA now */
 	getcon	TRA, r5
 
@@ -887,11 +866,6 @@ no_underflow:
  */
 	.global ret_from_irq
 ret_from_irq:
-#ifdef CONFIG_POOR_MANS_STRACE
-	pta	evt_debug_ret_from_irq, tr0
-	ori	SP, 0, r2
-	blink	tr0, LINK
-#endif
 	ld.q	SP, FRAME_S(FSSR), r6
 	shlri	r6, 30, r6
 	andi	r6, 1, r6
@@ -905,12 +879,6 @@ ret_from_irq:
 ret_from_exception:
 	preempt_stop()
 
-#ifdef CONFIG_POOR_MANS_STRACE
-	pta	evt_debug_ret_from_exc, tr0
-	ori	SP, 0, r2
-	blink	tr0, LINK
-#endif
-
 	ld.q	SP, FRAME_S(FSSR), r6
 	shlri	r6, 30, r6
 	andi	r6, 1, r6
@@ -1236,18 +1204,6 @@ syscall_bad:
 	.global syscall_ret
 syscall_ret:
 	st.q	SP, FRAME_R(9), r2	/* Expecting SP back to BASIC frame */
-
-#ifdef CONFIG_POOR_MANS_STRACE
-	/* nothing useful in registers at this point */
-
-	movi	evt_debug2, r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	ld.q	SP, FRAME_R(9), r2
-	or	SP, ZERO, r3
-	blink	tr0, LINK
-#endif
-
 	ld.q	SP, FRAME_S(FSPC), r2
 	addi	r2, 4, r2		/* Move PC, being pre-execution event */
 	st.q	SP, FRAME_S(FSPC), r2
@@ -1268,25 +1224,12 @@ ret_from_fork:
 	ptabs	r5, tr0
 	blink	tr0, LINK
 
-#ifdef CONFIG_POOR_MANS_STRACE
-	/* nothing useful in registers at this point */
-
-	movi	evt_debug2, r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	ld.q	SP, FRAME_R(9), r2
-	or	SP, ZERO, r3
-	blink	tr0, LINK
-#endif
-
 	ld.q	SP, FRAME_S(FSPC), r2
 	addi	r2, 4, r2		/* Move PC, being pre-execution event */
 	st.q	SP, FRAME_S(FSPC), r2
 	pta	ret_from_syscall, tr0
 	blink	tr0, ZERO
 
-
-
 syscall_allowed:
 	/* Use LINK to deflect the exit point, default is syscall_ret */
 	pta	syscall_ret, tr0
@@ -1410,8 +1353,8 @@ peek_real_address_q:
 	   r2(out) : result quadword
 
 	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to onchip_remap the debug
-	   module, and to avoid the need to onchip_remap the watchpoint
+	   registers for debugging (to avoid the need to ioremap the debug
+	   module, and to avoid the need to ioremap the watchpoint
 	   controller in a way that identity maps sufficient bits to avoid the
 	   SH5-101 cut2 silicon defect).
 
@@ -1459,8 +1402,8 @@ poke_real_address_q:
 	   r3 : quadword value to write.
 
 	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to onchip_remap the debug
-	   module, and to avoid the need to onchip_remap the watchpoint
+	   registers for debugging (to avoid the need to ioremap the debug
+	   module, and to avoid the need to ioremap the watchpoint
 	   controller in a way that identity maps sufficient bits to avoid the
 	   SH5-101 cut2 silicon defect).
 
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
new file mode 100644
index 00000000000..f5ff1ac57fc
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -0,0 +1,195 @@
+/*
+ * SH5-101/SH5-103 CPU Setup
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sh_timer.h>
+#include <asm/addrspace.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= PHYS_PERIPHERAL_BLOCK + 0x01030000,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.type		= PORT_SCIF,
+		.irqs		= { 39, 40, 42, 0 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= PHYS_PERIPHERAL_BLOCK + 0x01040000,
+		.end	= PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= IRQ_PRI,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= IRQ_CUI,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= IRQ_ATI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+#define	TMU_BLOCK_OFF	0x01020000
+#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+#define TMU0_BASE	(TMU_BASE + 0x8 + (0xc * 0x0))
+#define TMU1_BASE	(TMU_BASE + 0x8 + (0xc * 0x1))
+#define TMU2_BASE	(TMU_BASE + 0x8 + (0xc * 0x2))
+
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= TMU0_BASE,
+		.end	= TMU0_BASE + 0xc - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_TUNI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= TMU1_BASE,
+		.end	= TMU1_BASE + 0xc - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_TUNI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= TMU2_BASE,
+		.end	= TMU2_BASE + 0xc - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_TUNI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct platform_device *sh5_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+};
+
+static struct platform_device *sh5_devices[] __initdata = {
+	&sci_device,
+	&rtc_device,
+};
+
+static int __init sh5_devices_setup(void)
+{
+	int ret;
+
+	ret = platform_add_devices(sh5_early_devices,
+				   ARRAY_SIZE(sh5_early_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
+	return platform_add_devices(sh5_devices,
+				    ARRAY_SIZE(sh5_devices));
+}
+__initcall(sh5_devices_setup);
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh5_early_devices,
+				   ARRAY_SIZE(sh5_early_devices));
+}
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 29cf4588fc0..4f85fffaa55 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -12,6 +12,7 @@
  * for more details.
  */
 #include <linux/module.h>
+#include <linux/pci.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index c22853b059e..77dfecb6437 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -267,7 +267,7 @@ static struct mem_access trapped_io_access = {
 int handle_trapped_io(struct pt_regs *regs, unsigned long address)
 {
 	mm_segment_t oldfs;
-	opcode_t instruction;
+	insn_size_t instruction;
 	int tmp;
 
 	if (!lookup_tiop(address))
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 3f1372eb009..3d09062f468 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -31,39 +31,64 @@ void ack_bad_irq(unsigned int irq)
 }
 
 #if defined(CONFIG_PROC_FS)
+/*
+ * /proc/interrupts printing:
+ */
+static int show_other_interrupts(struct seq_file *p, int prec)
+{
+	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+	return 0;
+}
+
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
+	unsigned long flags, any_count = 0;
+	int i = *(loff_t *)v, j, prec;
+	struct irqaction *action;
+	struct irq_desc *desc;
+
+	if (i > nr_irqs)
+		return 0;
+
+	for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec)
+		j *= 10;
+
+	if (i == nr_irqs)
+		return show_other_interrupts(p, prec);
 
 	if (i == 0) {
-		seq_puts(p, "           ");
+		seq_printf(p, "%*s", prec + 8, "");
 		for_each_online_cpu(j)
-			seq_printf(p, "CPU%d       ",j);
+			seq_printf(p, "CPU%-8d", j);
 		seq_putc(p, '\n');
 	}
 
-	if (i < sh_mv.mv_nr_irqs) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
-		if (!action)
-			goto unlock;
-		seq_printf(p, "%3d: ",i);
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-		seq_printf(p, " %14s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
-		seq_printf(p, "  %s", action->name);
+	desc = irq_to_desc(i);
+	if (!desc)
+		return 0;
+
+	spin_lock_irqsave(&desc->lock, flags);
+	for_each_online_cpu(j)
+		any_count |= kstat_irqs_cpu(i, j);
+	action = desc->action;
+	if (!action && !any_count)
+		goto out;
+
+	seq_printf(p, "%*d: ", prec, i);
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+	seq_printf(p, " %14s", desc->chip->name);
+	seq_printf(p, "-%-8s", desc->name);
 
-		for (action=action->next; action; action = action->next)
+	if (action) {
+		seq_printf(p, "  %s", action->name);
+		while ((action = action->next) != NULL)
 			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-unlock:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == sh_mv.mv_nr_irqs)
-		seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
+	}
 
+	seq_putc(p, '\n');
+out:
+	spin_unlock_irqrestore(&desc->lock, flags);
 	return 0;
 }
 #endif
@@ -254,3 +279,11 @@ void __init init_IRQ(void)
 
 	irq_ctx_init(smp_processor_id());
 }
+
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	nr_irqs = sh_mv.mv_nr_irqs;
+	return 0;
+}
+#endif
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 7c747e7d71b..305aad742ae 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -47,7 +47,7 @@ char in_nmi = 0;	/* Set during NMI to prevent re-entry */
 /* Calculate the new address for after a step */
 static short *get_step_address(struct pt_regs *linux_regs)
 {
-	opcode_t op = __raw_readw(linux_regs->pc);
+	insn_size_t op = __raw_readw(linux_regs->pc);
 	long addr;
 
 	/* BT */
@@ -134,7 +134,7 @@ static short *get_step_address(struct pt_regs *linux_regs)
  */
 
 static unsigned long stepped_address;
-static opcode_t stepped_opcode;
+static insn_size_t stepped_opcode;
 
 static void do_single_step(struct pt_regs *linux_regs)
 {
diff --git a/arch/sh/kernel/timers/timer-broadcast.c b/arch/sh/kernel/localtimer.c
index 96e8eaea1e6..96e8eaea1e6 100644
--- a/arch/sh/kernel/timers/timer-broadcast.c
+++ b/arch/sh/kernel/localtimer.c
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index c1ea41e5812..548f6607fd0 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -129,6 +129,7 @@ void __init sh_mv_setup(void)
 	mv_set(ioport_map);
 	mv_set(ioport_unmap);
 	mv_set(irq_demux);
+	mv_set(mode_pins);
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index c43081039dd..c2efdcde266 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -46,8 +46,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* We don't need anything special. */
@@ -90,7 +88,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		 * SHmedia, the LSB of the symbol needs to be asserted
 		 * for the CPU to be in SHmedia mode when it starts executing
 		 * the branch target. */
-		relocation |= (sym->st_other & 4);
+		relocation |= !!(sym->st_other & 4);
 #endif
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 6d94725d22f..9289ede29c7 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -251,7 +251,8 @@ static void ubc_set_tracing(int asid, unsigned long pc)
 
 	if (current_cpu_data.type == CPU_SH7729 ||
 	    current_cpu_data.type == CPU_SH7710 ||
-	    current_cpu_data.type == CPU_SH7712) {
+	    current_cpu_data.type == CPU_SH7712 ||
+	    current_cpu_data.type == CPU_SH7203){
 		ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
 		ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
 	} else {
@@ -407,6 +408,7 @@ asmlinkage void break_point_trap(void)
 #else
 	ctrl_outw(0, UBC_BBRA);
 	ctrl_outw(0, UBC_BBRB);
+	ctrl_outl(0, UBC_BRCR);
 #endif
 	current->thread.ubc_pc = 0;
 	ubc_usercnt -= 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index f7b22dd83b0..3392e835a37 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -334,6 +334,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					[(addr - (long)&dummy->fpu) >> 2];
 		} else if (addr == (long) &dummy->u_fpvalid)
 			tmp = !!tsk_used_math(child);
+		else if (addr == PT_TEXT_ADDR)
+			tmp = child->mm->start_code;
+		else if (addr == PT_DATA_ADDR)
+			tmp = child->mm->start_data;
+		else if (addr == PT_TEXT_END_ADDR)
+			tmp = child->mm->end_code;
+		else if (addr == PT_TEXT_LEN)
+			tmp = child->mm->end_code - child->mm->start_code;
 		else
 			tmp = 0;
 		ret = put_user(tmp, datap);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 04a6004fccc..dd38338553e 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -29,6 +29,7 @@
 #include <linux/mmzone.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/platform_device.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -155,7 +156,7 @@ static void __init reserve_crashkernel(void)
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size) {
 		if (crash_base <= 0) {
-			vp = alloc_bootmem_nopanic(crash_size); 
+			vp = alloc_bootmem_nopanic(crash_size);
 			if (!vp) {
 				printk(KERN_INFO "crashkernel allocation "
 				       "failed\n");
@@ -184,7 +185,6 @@ static inline void __init reserve_crashkernel(void)
 {}
 #endif
 
-#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
 void __cpuinit calibrate_delay(void)
 {
 	struct clk *clk = clk_get(NULL, "cpu_clk");
@@ -200,7 +200,6 @@ void __cpuinit calibrate_delay(void)
 			 (loops_per_jiffy/(5000/HZ)) % 100,
 			 loops_per_jiffy);
 }
-#endif
 
 void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 						unsigned long end_pfn)
@@ -328,6 +327,10 @@ static int __init parse_elfcorehdr(char *arg)
 early_param("elfcorehdr", parse_elfcorehdr);
 #endif
 
+void __init __attribute__ ((weak)) plat_early_device_setup(void)
+{
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
@@ -381,6 +384,8 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	plat_early_device_setup();
+
 	sh_mv_setup();
 
 	/*
@@ -415,6 +420,18 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
+/* processor boot mode configuration */
+int generic_mode_pins(void)
+{
+	pr_warning("generic_mode_pins(): missing mode pin configuration\n");
+	return 0;
+}
+
+int test_mode_pin(int pin)
+{
+	return sh_mv.mv_mode_pins() & pin;
+}
+
 static const char *cpu_name[] = {
 	[CPU_SH7201]	= "SH7201",
 	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
@@ -435,7 +452,8 @@ static const char *cpu_name[] = {
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
 	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
-	[CPU_SH7366]	= "SH7366",	[CPU_SH_NONE]	= "Unknown"
+	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
+	[CPU_SH_NONE]	= "Unknown"
 };
 
 const char *get_cpu_subtype(struct sh_cpuinfo *c)
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 528de2955c8..fcc5de31f83 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -19,14 +19,10 @@
 #include <asm/ftrace.h>
 
 extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-extern struct hw_interrupt_type no_irq_type;
 
 /* platform dependent support */
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(irq_desc);
-EXPORT_SYMBOL(no_irq_type);
-
 EXPORT_SYMBOL(strlen);
 
 /* PCI exports */
@@ -41,11 +37,6 @@ EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(__copy_user);
-
-#ifdef CONFIG_MMU
-EXPORT_SYMBOL(get_vm_area);
-#endif
-
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index 0d74d6b8774..8f54ef0cfbc 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -76,5 +76,7 @@ EXPORT_SYMBOL(strcpy);
 #define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
 
 DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__sdivsi3_1);
+DECLARE_EXPORT(__sdivsi3_2);
 DECLARE_EXPORT(__udivsi3);
 DECLARE_EXPORT(__div_table);
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 05202edd8e2..a9fff9f731e 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -350,4 +350,5 @@ ENTRY(sys_call_table)
 	.long sys_pipe2
 	.long sys_inotify_init1
 	.long sys_preadv
-	.long sys_writev
+	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index a083609f928..75c1889af1e 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -389,3 +389,4 @@ sys_call_table:
 	.long sys_inotify_init1		/* 360 */
 	.long sys_preadv
 	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
new file mode 100644
index 00000000000..2edde32c764
--- /dev/null
+++ b/arch/sh/kernel/time.c
@@ -0,0 +1,125 @@
+/*
+ *  arch/sh/kernel/time.c
+ *
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 2002 - 2009  Paul Mundt
+ *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+#include <linux/smp.h>
+#include <linux/rtc.h>
+#include <asm/clock.h>
+#include <asm/rtc.h>
+
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+	tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+	return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
+
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
+unsigned long read_persistent_clock(void)
+{
+	struct timespec tv;
+	rtc_sh_get_time(&tv);
+	return tv.tv_sec;
+}
+
+int update_persistent_clock(struct timespec now)
+{
+	return rtc_sh_set_time(now.tv_sec);
+}
+#endif
+
+unsigned int get_rtc_time(struct rtc_time *tm)
+{
+	if (rtc_sh_get_time != null_rtc_get_time) {
+		struct timespec tv;
+
+		rtc_sh_get_time(&tv);
+		rtc_time_to_tm(tv.tv_sec, tm);
+	}
+
+	return RTC_24H;
+}
+EXPORT_SYMBOL(get_rtc_time);
+
+int set_rtc_time(struct rtc_time *tm)
+{
+	unsigned long secs;
+
+	rtc_tm_to_time(tm, &secs);
+	return rtc_sh_set_time(secs);
+}
+EXPORT_SYMBOL(set_rtc_time);
+
+static int __init rtc_generic_init(void)
+{
+	struct platform_device *pdev;
+
+	if (rtc_sh_get_time == null_rtc_get_time)
+		return -ENODEV;
+
+	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+module_init(rtc_generic_init);
+
+void (*board_time_init)(void);
+
+unsigned long long sched_clock(void)
+{
+	return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
+}
+
+static void __init sh_late_time_init(void)
+{
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 * Run probe() for one "earlytimer" device.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 1, 0);
+}
+
+void __init time_init(void)
+{
+	if (board_time_init)
+		board_time_init();
+
+	clk_init();
+
+	rtc_sh_get_time(&xtime);
+	set_normalized_timespec(&wall_to_monotonic,
+				-xtime.tv_sec, -xtime.tv_nsec);
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	local_timer_setup(smp_processor_id());
+#endif
+
+	late_time_init = sh_late_time_init;
+}
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
deleted file mode 100644
index 1700d2465f6..00000000000
--- a/arch/sh/kernel/time_32.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- *  arch/sh/kernel/time_32.c
- *
- *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 2002 - 2008  Paul Mundt
- *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
- *
- *  Some code taken from i386 version.
- *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/clockchips.h>
-#include <linux/mc146818rtc.h>	/* for rtc_lock */
-#include <linux/smp.h>
-#include <asm/clock.h>
-#include <asm/rtc.h>
-#include <asm/timer.h>
-#include <asm/kgdb.h>
-
-struct sys_timer *sys_timer;
-
-/* Move this somewhere more sensible.. */
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
-	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
-	tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
-	return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		/*
-		 * Turn off IRQs when grabbing xtime_lock, so that
-		 * the sys_timer get_offset code doesn't have to handle it.
-		 */
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = get_timer_offset();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / NSEC_PER_USEC;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= get_timer_offset() * NSEC_PER_USEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-
-	return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * handle_timer_tick() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-void handle_timer_tick(void)
-{
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-
-	/*
-	 * Here we are in the timer irq handler. We just have irqs locally
-	 * disabled but we don't know if the timer_bh is running on the other
-	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
-	 * the irq version of write_lock because as just said we have irq
-	 * locally disabled. -arca
-	 */
-	write_seqlock(&xtime_lock);
-	do_timer(1);
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (rtc_sh_set_time(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* do it again in 60s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
-	write_sequnlock(&xtime_lock);
-
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-
-#ifdef CONFIG_PM
-int timer_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
-
-	sys_timer->ops->stop();
-
-	return 0;
-}
-
-int timer_resume(struct sys_device *dev)
-{
-	struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
-
-	sys_timer->ops->start();
-
-	return 0;
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct sysdev_class timer_sysclass = {
-	.name	 = "timer",
-	.suspend = timer_suspend,
-	.resume	 = timer_resume,
-};
-
-static int __init timer_init_sysfs(void)
-{
-	int ret;
-
-	if (!sys_timer)
-		return 0;
-
-	ret = sysdev_class_register(&timer_sysclass);
-	if (ret != 0)
-		return ret;
-
-	sys_timer->dev.cls = &timer_sysclass;
-	return sysdev_register(&sys_timer->dev);
-}
-device_initcall(timer_init_sysfs);
-
-void (*board_time_init)(void);
-
-struct clocksource clocksource_sh = {
-	.name		= "SuperH",
-};
-
-#ifdef CONFIG_GENERIC_TIME
-unsigned long long sched_clock(void)
-{
-	unsigned long long cycles;
-
-	/* jiffies based sched_clock if no clocksource is installed */
-	if (!clocksource_sh.rating)
-		return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
-
-	cycles = clocksource_sh.read(&clocksource_sh);
-	return cyc2ns(&clocksource_sh, cycles);
-}
-#endif
-
-void __init time_init(void)
-{
-	if (board_time_init)
-		board_time_init();
-
-	clk_init();
-
-	rtc_sh_get_time(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-				-xtime.tv_sec, -xtime.tv_nsec);
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	local_timer_setup(smp_processor_id());
-#endif
-
-	/*
-	 * Find the timer to use as the system timer, it will be
-	 * initialized for us.
-	 */
-	sys_timer = get_sys_timer();
-	if (unlikely(!sys_timer))
-		panic("System timer missing.\n");
-
-	printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
-}
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
deleted file mode 100644
index 988c77c3723..00000000000
--- a/arch/sh/kernel/time_64.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * arch/sh/kernel/time_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- * Copyright (C) 2003  Richard Curnow
- *
- *    Original TMU/RTC code taken from sh version.
- *    Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- *      Some code taken from i386 version.
- *      Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <cpu/registers.h>	 /* required by inline __asm__ stmt. */
-#include <cpu/irq.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/delay.h>
-#include <asm/clock.h>
-
-#define TMU_TOCR_INIT	0x00
-#define TMU0_TCR_INIT	0x0020
-#define TMU_TSTR_INIT	1
-#define TMU_TSTR_OFF	0
-
-/* Real Time Clock */
-#define	RTC_BLOCK_OFF	0x01040000
-#define RTC_BASE	PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
-#define RTC_RCR1_CIE	0x10	/* Carry Interrupt Enable */
-#define RTC_RCR1	(rtc_base + 0x38)
-
-/* Time Management Unit */
-#define	TMU_BLOCK_OFF	0x01020000
-#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-#define TMU0_BASE	tmu_base + 0x8 + (0xc * 0x0)
-#define TMU1_BASE	tmu_base + 0x8 + (0xc * 0x1)
-#define TMU2_BASE	tmu_base + 0x8 + (0xc * 0x2)
-
-#define TMU_TOCR	tmu_base+0x0	/* Byte access */
-#define TMU_TSTR	tmu_base+0x4	/* Byte access */
-
-#define TMU0_TCOR	TMU0_BASE+0x0	/* Long access */
-#define TMU0_TCNT	TMU0_BASE+0x4	/* Long access */
-#define TMU0_TCR	TMU0_BASE+0x8	/* Word access */
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-static unsigned long tmu_base, rtc_base;
-unsigned long cprc_base;
-
-/* Variables to allow interpolation of time of day to resolution better than a
- * jiffy. */
-
-/* This is effectively protected by xtime_lock */
-static unsigned long ctc_last_interrupt;
-static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
-
-#define CTC_JIFFY_SCALE_SHIFT 40
-
-/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
-static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
-
-/* Estimate number of microseconds that have elapsed since the last timer tick,
-   by scaling the delta that has occurred in the CTC register.
-
-   WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
-   the CPU clock rate.  If the CPU sleeps, the CTC stops counting.  Bear this
-   in mind if enabling SLEEP_WORKS in process.c.  In that case, this algorithm
-   probably needs to use TMU.TCNT0 instead.  This will work even if the CPU is
-   sleeping, though will be coarser.
-
-   FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
-   is running or if the freq or tick arguments of adjtimex are modified after
-   we have calibrated the scaling factor?  This will result in either a jump at
-   the end of a tick period, or a wrap backwards at the start of the next one,
-   if the application is reading the time of day often enough.  I think we
-   ought to do better than this.  For this reason, usecs_per_jiffy is left
-   separated out in the calculation below.  This allows some future hook into
-   the adjtime-related stuff in kernel/timer.c to remove this hazard.
-
-*/
-
-static unsigned long usecs_since_tick(void)
-{
-	unsigned long long current_ctc;
-	long ctc_ticks_since_interrupt;
-	unsigned long long ull_ctc_ticks_since_interrupt;
-	unsigned long result;
-
-	unsigned long long mul1_out;
-	unsigned long long mul1_out_high;
-	unsigned long long mul2_out_low, mul2_out_high;
-
-	/* Read CTC register */
-	asm ("getcon cr62, %0" : "=r" (current_ctc));
-	/* Note, the CTC counts down on each CPU clock, not up.
-	   Note(2), use long type to get correct wraparound arithmetic when
-	   the counter crosses zero. */
-	ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
-	ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
-
-	/* Inline assembly to do 32x32x32->64 multiplier */
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul1_out) :
-	     "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
-
-	mul1_out_high = mul1_out >> 32;
-
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul2_out_low) :
-	     "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
-
-#if 1
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul2_out_high) :
-	     "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
-#endif
-
-	result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
-
-	return result;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = usecs_since_tick();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= 1000 * usecs_since_tick();
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-
-	return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
-	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
-	tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
-	return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static inline void do_timer_interrupt(void)
-{
-	unsigned long long current_ctc;
-
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-
-	/*
-	 * Here we are in the timer irq handler. We just have irqs locally
-	 * disabled but we don't know if the timer_bh is running on the other
-	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
-	 * the irq version of write_lock because as just said we have irq
-	 * locally disabled. -arca
-	 */
-	write_seqlock(&xtime_lock);
-	asm ("getcon cr62, %0" : "=r" (current_ctc));
-	ctc_last_interrupt = (unsigned long) current_ctc;
-
-	do_timer(1);
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (rtc_sh_set_time(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
-	write_sequnlock(&xtime_lock);
-
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned long timer_status;
-
-	/* Clear UNF bit */
-	timer_status = ctrl_inw(TMU0_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU0_TCR);
-
-	do_timer_interrupt();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.name = "timer",
-};
-
-void __init time_init(void)
-{
-	unsigned long interval;
-	struct clk *clk;
-
-	tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
-	if (!tmu_base) {
-		panic("Unable to remap TMU\n");
-	}
-
-	rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
-	if (!rtc_base) {
-		panic("Unable to remap RTC\n");
-	}
-
-	clk = clk_get(NULL, "cpu_clk");
-	scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) /
-			(unsigned long long)(clk_get_rate(clk) / HZ));
-
-	rtc_sh_get_time(&xtime);
-
-	setup_irq(TIMER_IRQ, &irq0);
-
-	clk = clk_get(NULL, "module_clk");
-	interval = (clk_get_rate(clk)/(HZ*4));
-
-	printk("Interval = %ld\n", interval);
-
-	/* Start TMU0 */
-	ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
-	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-	ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
-	ctrl_outl(interval, TMU0_TCOR);
-	ctrl_outl(interval, TMU0_TCNT);
-	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-}
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		/* RTC base, filled in by rtc_init */
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		/* Period IRQ */
-		.start	= IRQ_PRI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= IRQ_CUI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
-		.start	= IRQ_ATI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "sh-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-	.resource	= rtc_resources,
-};
-
-static int __init rtc_init(void)
-{
-	rtc_resources[0].start	= rtc_base;
-	rtc_resources[0].end	= rtc_resources[0].start + 0x58 - 1;
-
-	return platform_device_register(&rtc_device);
-}
-device_initcall(rtc_init);
diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile
deleted file mode 100644
index 0b7f8577193..00000000000
--- a/arch/sh/kernel/timers/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the various Linux/SuperH timers
-#
-
-obj-y	:= timer.o
-
-obj-$(CONFIG_SH_TMU)		+= timer-tmu.o
-obj-$(CONFIG_SH_MTU2)		+= timer-mtu2.o
-obj-$(CONFIG_SH_CMT)		+= timer-cmt.o
-
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= timer-broadcast.o
diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c
deleted file mode 100644
index 9aa348658ae..00000000000
--- a/arch/sh/kernel/timers/timer-cmt.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support
- *
- *  Copyright (C) 2005  Yoshinori Sato
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/seqlock.h>
-#include <asm/timer.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/clock.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CMT_CMSTR	0xf84a0070
-#define CMT_CMCSR_0	0xf84a0072
-#define CMT_CMCNT_0	0xf84a0074
-#define CMT_CMCOR_0	0xf84a0076
-#define CMT_CMCSR_1	0xf84a0078
-#define CMT_CMCNT_1	0xf84a007a
-#define CMT_CMCOR_1	0xf84a007c
-
-#define STBCR3		0xf80a0000
-#define cmt_clock_enable() do {	ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0)
-#define CMT_CMCSR_INIT	0x0040
-#define CMT_CMCSR_CALIB	0x0000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7206) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7263)
-#define CMT_CMSTR	0xfffec000
-#define CMT_CMCSR_0	0xfffec002
-#define CMT_CMCNT_0	0xfffec004
-#define CMT_CMCOR_0	0xfffec006
-
-#define STBCR4		0xfffe040c
-#define cmt_clock_enable() do {	ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0)
-#define CMT_CMCSR_INIT	0x0040
-#define CMT_CMCSR_CALIB	0x0000
-#else
-#error "Unknown CPU SUBTYPE"
-#endif
-
-static unsigned long cmt_timer_get_offset(void)
-{
-	int count;
-	static unsigned short count_p = 0xffff;    /* for the first call after boot */
-	static unsigned long jiffies_p = 0;
-
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off.
-	 */
-	unsigned long jiffies_t;
-
-	/* timer count may underflow right here */
-	count =  ctrl_inw(CMT_CMCOR_0);
-	count -= ctrl_inw(CMT_CMCNT_0);
-
-	jiffies_t = jiffies;
-
-	/*
-	 * avoiding timer inconsistencies (they are rare, but they happen)...
-	 * there is one kind of problem that must be avoided here:
-	 *  1. the timer counter underflows
-	 */
-
-	if (jiffies_t == jiffies_p) {
-		if (count > count_p) {
-			/* the nutcase */
-			if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */
-				count -= LATCH;
-			} else {
-				printk("%s (): hardware timer problem?\n",
-				       __func__);
-			}
-		}
-	} else
-		jiffies_p = jiffies_t;
-
-	count_p = count;
-
-	count = ((LATCH-1) - count) * TICK_SIZE;
-	count = (count + LATCH/2) / LATCH;
-
-	return count;
-}
-
-static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id)
-{
-	unsigned long timer_status;
-
-	/* Clear CMF bit */
-	timer_status = ctrl_inw(CMT_CMCSR_0);
-	timer_status &= ~0x80;
-	ctrl_outw(timer_status, CMT_CMCSR_0);
-
-	handle_timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction cmt_irq = {
-	.name		= "timer",
-	.handler	= cmt_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-static void cmt_clk_init(struct clk *clk)
-{
-	u8 divisor = CMT_CMCSR_INIT & 0x3;
-	ctrl_inw(CMT_CMCSR_0);
-	ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0);
-	clk->parent = clk_get(NULL, "module_clk");
-	clk->rate = clk->parent->rate / (8 << (divisor << 1));
-}
-
-static void cmt_clk_recalc(struct clk *clk)
-{
-	u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3;
-	clk->rate = clk->parent->rate / (8 << (divisor << 1));
-}
-
-static struct clk_ops cmt_clk_ops = {
-	.init		= cmt_clk_init,
-	.recalc		= cmt_clk_recalc,
-};
-
-static struct clk cmt0_clk = {
-	.name		= "cmt0_clk",
-	.ops		= &cmt_clk_ops,
-};
-
-static int cmt_timer_start(void)
-{
-	ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR);
-	return 0;
-}
-
-static int cmt_timer_stop(void)
-{
-	ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR);
-	return 0;
-}
-
-static int cmt_timer_init(void)
-{
-	unsigned long interval;
-
-	cmt_clock_enable();
-
-	setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq);
-
-	cmt0_clk.parent = clk_get(NULL, "module_clk");
-
-	cmt_timer_stop();
-
-	interval = cmt0_clk.parent->rate / 8 / HZ;
-	printk(KERN_INFO "Interval = %ld\n", interval);
-
-	ctrl_outw(interval, CMT_CMCOR_0);
-
-	clk_register(&cmt0_clk);
-	clk_enable(&cmt0_clk);
-
-	cmt_timer_start();
-
-	return 0;
-}
-
-static struct sys_timer_ops cmt_timer_ops = {
-	.init		= cmt_timer_init,
-	.start		= cmt_timer_start,
-	.stop		= cmt_timer_stop,
-#ifndef CONFIG_GENERIC_TIME
-	.get_offset	= cmt_timer_get_offset,
-#endif
-};
-
-struct sys_timer cmt_timer = {
-	.name	= "cmt",
-	.ops	= &cmt_timer_ops,
-};
diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c
deleted file mode 100644
index 9b0ef012647..00000000000
--- a/arch/sh/kernel/timers/timer-mtu2.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/sh/kernel/timers/timer-mtu2.c - MTU2 Timer Support
- *
- *  Copyright (C) 2005  Paul Mundt
- *
- * Based off of arch/sh/kernel/timers/timer-tmu.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/seqlock.h>
-#include <asm/timer.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/clock.h>
-
-/*
- * We use channel 1 for our lowly system timer. Channel 2 would be the other
- * likely candidate, but we leave it alone as it has higher divisors that
- * would be of more use to other more interesting applications.
- *
- * TODO: Presently we only implement a 16-bit single-channel system timer.
- * However, we can implement channel cascade if we go the overflow route and
- * get away with using 2 MTU2 channels as a 32-bit timer.
- */
-#define MTU2_TSTR	0xfffe4280
-#define MTU2_TCR_1	0xfffe4380
-#define MTU2_TMDR_1	0xfffe4381
-#define MTU2_TIOR_1	0xfffe4382
-#define MTU2_TIER_1	0xfffe4384
-#define MTU2_TSR_1	0xfffe4385
-#define MTU2_TCNT_1	0xfffe4386	/* 16-bit counter */
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7203)
-#define MTU2_TGRA_1	0xfffe4388
-#else
-#define MTU2_TGRA_1	0xfffe438a
-#endif
-
-#define STBCR3		0xfffe0408
-
-#define MTU2_TSTR_CST1	(1 << 1)	/* Counter Start 1 */
-
-#define MTU2_TSR_TGFA	(1 << 0)	/* GRA compare match */
-
-#define MTU2_TIER_TGIEA	(1 << 0)	/* GRA compare match  interrupt enable */
-
-#define MTU2_TCR_INIT	0x22
-
-#define MTU2_TCR_CALIB  0x00
-
-static unsigned long mtu2_timer_get_offset(void)
-{
-	int count;
-	static int count_p = 0x7fff;	/* for the first call after boot */
-	static unsigned long jiffies_p = 0;
-
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off.
-	 */
-	unsigned long jiffies_t;
-
-	/* timer count may underflow right here */
-	count = ctrl_inw(MTU2_TCNT_1);	/* read the latched count */
-
-	jiffies_t = jiffies;
-
-	/*
-	 * avoiding timer inconsistencies (they are rare, but they happen)...
-	 * there is one kind of problem that must be avoided here:
-	 *  1. the timer counter underflows
-	 */
-
-	if (jiffies_t == jiffies_p) {
-		if (count > count_p) {
-			if (ctrl_inb(MTU2_TSR_1) & MTU2_TSR_TGFA) {
-				count -= LATCH;
-			} else {
-				printk("%s (): hardware timer problem?\n",
-				       __func__);
-			}
-		}
-	} else
-		jiffies_p = jiffies_t;
-
-	count_p = count;
-
-	count = ((LATCH-1) - count) * TICK_SIZE;
-	count = (count + LATCH/2) / LATCH;
-
-	return count;
-}
-
-static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id)
-{
-	unsigned long timer_status;
-
-	/* Clear TGFA bit */
-	timer_status = ctrl_inb(MTU2_TSR_1);
-	timer_status &= ~MTU2_TSR_TGFA;
-	ctrl_outb(timer_status, MTU2_TSR_1);
-
-	/* Do timer tick */
-	handle_timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mtu2_irq = {
-	.name		= "timer",
-	.handler	= mtu2_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 };
-
-static void mtu2_clk_init(struct clk *clk)
-{
-	u8 idx = MTU2_TCR_INIT & 0x7;
-
-	clk->rate = clk->parent->rate / divisors[idx];
-	/* Start TCNT counting */
-	ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR);
-
-}
-
-static void mtu2_clk_recalc(struct clk *clk)
-{
-	u8 idx = ctrl_inb(MTU2_TCR_1) & 0x7;
-	clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops mtu2_clk_ops = {
-	.init		= mtu2_clk_init,
-	.recalc		= mtu2_clk_recalc,
-};
-
-static struct clk mtu2_clk1 = {
-	.name		= "mtu2_clk1",
-	.ops		= &mtu2_clk_ops,
-};
-
-static int mtu2_timer_start(void)
-{
-	ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR);
-	return 0;
-}
-
-static int mtu2_timer_stop(void)
-{
-	ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR);
-	return 0;
-}
-
-static int mtu2_timer_init(void)
-{
-	unsigned long interval;
-
-	setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq);
-
-	mtu2_clk1.parent = clk_get(NULL, "module_clk");
-
-	ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3);
-
-	/* Normal operation */
-	ctrl_outb(0, MTU2_TMDR_1);
-	ctrl_outb(MTU2_TCR_INIT, MTU2_TCR_1);
-	ctrl_outb(0x01, MTU2_TIOR_1);
-
-	/* Enable underflow interrupt */
-	ctrl_outb(ctrl_inb(MTU2_TIER_1) | MTU2_TIER_TGIEA, MTU2_TIER_1);
-
-	interval = CONFIG_SH_PCLK_FREQ / 16 / HZ;
-	printk(KERN_INFO "Interval = %ld\n", interval);
-
-	ctrl_outw(interval, MTU2_TGRA_1);
-	ctrl_outw(0, MTU2_TCNT_1);
-
-	clk_register(&mtu2_clk1);
-	clk_enable(&mtu2_clk1);
-
-	return 0;
-}
-
-struct sys_timer_ops mtu2_timer_ops = {
-	.init		= mtu2_timer_init,
-	.start		= mtu2_timer_start,
-	.stop		= mtu2_timer_stop,
-#ifndef CONFIG_GENERIC_TIME
-	.get_offset	= mtu2_timer_get_offset,
-#endif
-};
-
-struct sys_timer mtu2_timer = {
-	.name	= "mtu2",
-	.ops	= &mtu2_timer_ops,
-};
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
deleted file mode 100644
index fe8d8930ccb..00000000000
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * arch/sh/kernel/timers/timer-tmu.c - TMU Timer Support
- *
- *  Copyright (C) 2005 - 2007  Paul Mundt
- *
- * TMU handling code hacked out of arch/sh/kernel/time.c
- *
- *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 2002, 2003, 2004  Paul Mundt
- *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/seqlock.h>
-#include <linux/clockchips.h>
-#include <asm/timer.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/clock.h>
-
-#define TMU_TOCR_INIT	0x00
-#define TMU_TCR_INIT	0x0020
-
-#define TMU0		(0)
-#define TMU1		(1)
-
-static inline void _tmu_start(int tmu_num)
-{
-	ctrl_outb(ctrl_inb(TMU_012_TSTR) | (0x1<<tmu_num), TMU_012_TSTR);
-}
-
-static inline void _tmu_set_irq(int tmu_num, int enabled)
-{
-	register unsigned long tmu_tcr = TMU0_TCR + (0xc*tmu_num);
-	ctrl_outw( (enabled ? ctrl_inw(tmu_tcr) | (1<<5) : ctrl_inw(tmu_tcr) & ~(1<<5)), tmu_tcr);
-}
-
-static inline void _tmu_stop(int tmu_num)
-{
-	ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~(0x1<<tmu_num), TMU_012_TSTR);
-}
-
-static inline void _tmu_clear_status(int tmu_num)
-{
-	register unsigned long tmu_tcr = TMU0_TCR + (0xc*tmu_num);
-	/* Clear UNF bit */
-	ctrl_outw(ctrl_inw(tmu_tcr) & ~0x100, tmu_tcr);
-}
-
-static inline unsigned long _tmu_read(int tmu_num)
-{
-        return ctrl_inl(TMU0_TCNT+0xC*tmu_num);
-}
-
-static int tmu_timer_start(void)
-{
-	_tmu_start(TMU0);
-	_tmu_start(TMU1);
-	_tmu_set_irq(TMU0,1);
-	return 0;
-}
-
-static int tmu_timer_stop(void)
-{
-	_tmu_stop(TMU0);
-	_tmu_stop(TMU1);
-	_tmu_clear_status(TMU0);
-	return 0;
-}
-
-/*
- * also when the module_clk is scaled the TMU1
- * will show the same frequency
- */
-static int tmus_are_scaled;
-
-static cycle_t tmu_timer_read(struct clocksource *cs)
-{
-	return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
-}
-
-
-static unsigned long tmu_latest_interval[3];
-static void tmu_timer_set_interval(int tmu_num, unsigned long interval, unsigned int reload)
-{
-	unsigned long tmu_tcnt = TMU0_TCNT + tmu_num*0xC;
-	unsigned long tmu_tcor = TMU0_TCOR + tmu_num*0xC;
-
-	_tmu_stop(tmu_num);
-
-	ctrl_outl(interval, tmu_tcnt);
-	tmu_latest_interval[tmu_num] = interval;
-
-	/*
-	 * TCNT reloads from TCOR on underflow, clear it if we don't
-	 * intend to auto-reload
-	 */
-	ctrl_outl( reload ? interval : 0 , tmu_tcor);
-
-	_tmu_start(tmu_num);
-}
-
-static int tmu_set_next_event(unsigned long cycles,
-			      struct clock_event_device *evt)
-{
-	tmu_timer_set_interval(TMU0,cycles, evt->mode == CLOCK_EVT_MODE_PERIODIC);
-	_tmu_set_irq(TMU0,1);
-	return 0;
-}
-
-static void tmu_set_mode(enum clock_event_mode mode,
-			 struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ctrl_outl(tmu_latest_interval[TMU0], TMU0_TCOR);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		ctrl_outl(0, TMU0_TCOR);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device tmu0_clockevent = {
-	.name		= "tmu0",
-	.shift		= 32,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= tmu_set_mode,
-	.set_next_event	= tmu_set_next_event,
-};
-
-static irqreturn_t tmu_timer_interrupt(int irq, void *dummy)
-{
-	struct clock_event_device *evt = &tmu0_clockevent;
-	_tmu_clear_status(TMU0);
-	_tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT);
-
-	switch (tmu0_clockevent.mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_PERIODIC:
-		evt->event_handler(evt);
-		break;
-	default:
-		break;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tmu0_irq = {
-	.name		= "periodic/oneshot timer",
-	.handler	= tmu_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-static void __init tmu_clk_init(struct clk *clk)
-{
-	u8 divisor  = TMU_TCR_INIT & 0x7;
-	int tmu_num = clk->name[3]-'0';
-	ctrl_outw(TMU_TCR_INIT, TMU0_TCR+(tmu_num*0xC));
-	clk->rate = clk_get_rate(clk->parent) / (4 << (divisor << 1));
-}
-
-static void tmu_clk_recalc(struct clk *clk)
-{
-	int tmu_num = clk->name[3]-'0';
-	unsigned long prev_rate = clk_get_rate(clk);
-	unsigned long flags;
-	u8 divisor = ctrl_inw(TMU0_TCR+tmu_num*0xC) & 0x7;
-	clk->rate  = clk_get_rate(clk->parent) / (4 << (divisor << 1));
-
-	if(prev_rate==clk_get_rate(clk))
-		return;
-
-	if(tmu_num)
-		return; /* No more work on TMU1 */
-
-	local_irq_save(flags);
-	tmus_are_scaled = (prev_rate > clk->rate);
-
-	_tmu_stop(TMU0);
-
-	tmu0_clockevent.mult = div_sc(clk->rate, NSEC_PER_SEC,
-				tmu0_clockevent.shift);
-	tmu0_clockevent.max_delta_ns =
-			clockevent_delta2ns(-1, &tmu0_clockevent);
-	tmu0_clockevent.min_delta_ns =
-			clockevent_delta2ns(1, &tmu0_clockevent);
-
-	if (tmus_are_scaled)
-		tmu_latest_interval[TMU0] >>= 1;
-	else
-		tmu_latest_interval[TMU0] <<= 1;
-
-	tmu_timer_set_interval(TMU0,
-		tmu_latest_interval[TMU0],
-		tmu0_clockevent.mode == CLOCK_EVT_MODE_PERIODIC);
-
-	_tmu_start(TMU0);
-
-	local_irq_restore(flags);
-}
-
-static struct clk_ops tmu_clk_ops = {
-	.init		= tmu_clk_init,
-	.recalc		= tmu_clk_recalc,
-};
-
-static struct clk tmu0_clk = {
-	.name		= "tmu0_clk",
-	.ops		= &tmu_clk_ops,
-};
-
-static struct clk tmu1_clk = {
-	.name		= "tmu1_clk",
-	.ops		= &tmu_clk_ops,
-};
-
-static int tmu_timer_init(void)
-{
-	unsigned long interval;
-	unsigned long frequency;
-
-	setup_irq(CONFIG_SH_TIMER_IRQ, &tmu0_irq);
-
-	tmu0_clk.parent = clk_get(NULL, "module_clk");
-	tmu1_clk.parent = clk_get(NULL, "module_clk");
-
-	tmu_timer_stop();
-
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7721) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7786) && \
-    !defined(CONFIG_CPU_SUBTYPE_SHX3)
-	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
-
-	clk_register(&tmu0_clk);
-	clk_register(&tmu1_clk);
-	clk_enable(&tmu0_clk);
-	clk_enable(&tmu1_clk);
-
-	frequency = clk_get_rate(&tmu0_clk);
-	interval = (frequency + HZ / 2) / HZ;
-
-	tmu_timer_set_interval(TMU0,interval, 1);
-	tmu_timer_set_interval(TMU1,~0,1);
-
-	_tmu_start(TMU1);
-
-	clocksource_sh.rating = 200;
-	clocksource_sh.mask = CLOCKSOURCE_MASK(32);
-	clocksource_sh.read = tmu_timer_read;
-	clocksource_sh.shift = 10;
-	clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk),
-						  clocksource_sh.shift);
-	clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register(&clocksource_sh);
-
-	tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC,
-				      tmu0_clockevent.shift);
-	tmu0_clockevent.max_delta_ns =
-			clockevent_delta2ns(-1, &tmu0_clockevent);
-	tmu0_clockevent.min_delta_ns =
-			clockevent_delta2ns(1, &tmu0_clockevent);
-
-	tmu0_clockevent.cpumask = cpumask_of(0);
-	tmu0_clockevent.rating = 100;
-
-	clockevents_register_device(&tmu0_clockevent);
-
-	return 0;
-}
-
-static struct sys_timer_ops tmu_timer_ops = {
-	.init		= tmu_timer_init,
-	.start		= tmu_timer_start,
-	.stop		= tmu_timer_stop,
-};
-
-struct sys_timer tmu_timer = {
-	.name	= "tmu",
-	.ops	= &tmu_timer_ops,
-};
diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c
deleted file mode 100644
index 4e7e747d1b6..00000000000
--- a/arch/sh/kernel/timers/timer.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/sh/kernel/timers/timer.c - Common timer code
- *
- *  Copyright (C) 2005  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/string.h>
-#include <asm/timer.h>
-
-static struct sys_timer *sys_timers[] = {
-#ifdef CONFIG_SH_TMU
-	&tmu_timer,
-#endif
-#ifdef CONFIG_SH_MTU2
-	&mtu2_timer,
-#endif
-#ifdef CONFIG_SH_CMT
-	&cmt_timer,
-#endif
-	NULL,
-};
-
-static char timer_override[10];
-static int __init timer_setup(char *str)
-{
-	if (str)
-		strlcpy(timer_override, str, sizeof(timer_override));
-	return 1;
-}
-__setup("timer=", timer_setup);
-
-struct sys_timer *get_sys_timer(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sys_timers); i++) {
-		struct sys_timer *t = sys_timers[i];
-
-		if (unlikely(!t))
-			break;
-		if (unlikely(timer_override[0]))
-			if ((strcmp(timer_override, t->name) != 0))
-				continue;
-		if (likely(t->ops->init() == 0))
-			return t;
-	}
-
-	return NULL;
-}
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 438f1ebcc45..46348ed07cc 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -22,11 +22,11 @@ static void handle_BUG(struct pt_regs *regs)
 
 int is_valid_bugaddr(unsigned long addr)
 {
-	unsigned short opcode;
+	insn_size_t opcode;
 
 	if (addr < PAGE_OFFSET)
 		return 0;
-	if (probe_kernel_address((u16 *)addr, opcode))
+	if (probe_kernel_address((insn_size_t *)addr, opcode))
 		return 0;
 
 	return opcode == TRAPA_BUG_OPCODE;
@@ -66,7 +66,7 @@ BUILD_TRAP_HANDLER(bug)
 
 #ifdef CONFIG_BUG
 	if (__kernel_text_address(instruction_pointer(regs))) {
-		opcode_t insn = *(opcode_t *)instruction_pointer(regs);
+		insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
 		if (insn == TRAPA_BUG_OPCODE)
 			handle_BUG(regs);
 	}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 30ca9c51e52..2b772776fcd 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -34,6 +34,7 @@
 # define TRAP_ILLEGAL_SLOT_INST	6
 # define TRAP_ADDRESS_ERROR	9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_UBC		12
 #  define TRAP_FPU_ERROR	13
 #  define TRAP_DIVZERO_ERROR	17
 #  define TRAP_DIVOVF_ERROR	18
@@ -176,7 +177,7 @@ static struct mem_access user_mem_access = {
  *   (if that instruction is in a branch delay slot)
  * - return 0 if emulation okay, -EFAULT on existential error
  */
-static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
+static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
 				struct mem_access *ma)
 {
 	int ret, index, count;
@@ -321,10 +322,10 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
  * - fetches the instruction from PC+2
  */
 static inline int handle_delayslot(struct pt_regs *regs,
-				   opcode_t old_instruction,
+				   insn_size_t old_instruction,
 				   struct mem_access *ma)
 {
-	opcode_t instruction;
+	insn_size_t instruction;
 	void __user *addr = (void __user *)(regs->pc +
 		instruction_size(old_instruction));
 
@@ -364,7 +365,7 @@ static inline int handle_delayslot(struct pt_regs *regs,
 
 static int handle_unaligned_notify_count = 10;
 
-int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
+int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 			    struct mem_access *ma)
 {
 	u_int rm;
@@ -522,7 +523,7 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 	unsigned long error_code = 0;
 	mm_segment_t oldfs;
 	siginfo_t info;
-	opcode_t instruction;
+	insn_size_t instruction;
 	int tmp;
 
 	/* Intentional ifdef */
@@ -849,6 +850,10 @@ void __init trap_init(void)
 #endif
 #endif
 
+#ifdef TRAP_UBC
+	set_exception_table_vec(TRAP_UBC, break_point_trap);
+#endif
+
 	/* Setup VBR for boot cpu */
 	per_cpu_trap_init();
 }
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index a85831cbf18..267e5ebbb47 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -370,7 +370,6 @@ static int generate_and_check_address(struct pt_regs *regs,
 		return -1;
 	}
 
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 	/* Check accessible.  For misaligned access in the kernel, assume the
 	   address is always accessible (and if not, just fault when the
 	   load/store gets done.) */
@@ -380,18 +379,13 @@ static int generate_and_check_address(struct pt_regs *regs,
 		}
 		/* Do access_ok check later - it depends on whether it's a load or a store. */
 	}
-#endif
 
 	*address = addr;
 	return 0;
 }
 
-/* Default value as for sh */
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 static int user_mode_unaligned_fixup_count = 10;
 static int user_mode_unaligned_fixup_enable = 1;
-#endif
-
 static int kernel_mode_unaligned_fixup_count = 32;
 
 static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
@@ -440,7 +434,6 @@ static int misaligned_load(struct pt_regs *regs,
 	}
 
 	destreg = (opcode >> 4) & 0x3f;
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 	if (user_mode(regs)) {
 		__u64 buffer;
 
@@ -470,9 +463,7 @@ static int misaligned_load(struct pt_regs *regs,
 				width_shift, (unsigned long) regs->pc);
 			break;
 		}
-	} else
-#endif
-	{
+	} else {
 		/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
 		__u64 lo, hi;
 
@@ -519,7 +510,6 @@ static int misaligned_store(struct pt_regs *regs,
 	}
 
 	srcreg = (opcode >> 4) & 0x3f;
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 	if (user_mode(regs)) {
 		__u64 buffer;
 
@@ -546,9 +536,7 @@ static int misaligned_store(struct pt_regs *regs,
 		if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
 			return -1; /* fault */
 		}
-	} else
-#endif
-	{
+	} else {
 		/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
 		__u64 val = regs->regs[srcreg];
 
@@ -576,7 +564,6 @@ static int misaligned_store(struct pt_regs *regs,
 
 }
 
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 /* Never need to fix up misaligned FPU accesses within the kernel since that's a real
    error. */
 static int misaligned_fpu_load(struct pt_regs *regs,
@@ -727,7 +714,6 @@ static int misaligned_fpu_store(struct pt_regs *regs,
 		return -1;
 	}
 }
-#endif
 
 static int misaligned_fixup(struct pt_regs *regs)
 {
@@ -735,12 +721,8 @@ static int misaligned_fixup(struct pt_regs *regs)
 	int error;
 	int major, minor;
 
-#if !defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
-	/* Never fixup user mode misaligned accesses without this option enabled. */
-	return -1;
-#else
-	if (!user_mode_unaligned_fixup_enable) return -1;
-#endif
+	if (!user_mode_unaligned_fixup_enable)
+		return -1;
 
 	error = read_opcode(regs->pc, &opcode, user_mode(regs));
 	if (error < 0) {
@@ -749,15 +731,12 @@ static int misaligned_fixup(struct pt_regs *regs)
 	major = (opcode >> 26) & 0x3f;
 	minor = (opcode >> 16) & 0xf;
 
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 	if (user_mode(regs) && (user_mode_unaligned_fixup_count > 0)) {
 		--user_mode_unaligned_fixup_count;
 		/* Only do 'count' worth of these reports, to remove a potential DoS against syslog */
 		printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n",
 		       current->comm, task_pid_nr(current), (__u32)regs->pc, opcode);
-	} else
-#endif
-	if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) {
+	} else if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) {
 		--kernel_mode_unaligned_fixup_count;
 		if (in_interrupt()) {
 			printk("Fixing up unaligned kernelspace access in interrupt pc=0x%08x ins=0x%08lx\n",
@@ -830,7 +809,6 @@ static int misaligned_fixup(struct pt_regs *regs)
 			}
 			break;
 
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 		case (0x94>>2): /* FLD.S */
 			error = misaligned_fpu_load(regs, opcode, 1, 2, 0);
 			break;
@@ -881,7 +859,6 @@ static int misaligned_fixup(struct pt_regs *regs)
 				break;
 			}
 			break;
-#endif
 
 		default:
 			/* Fault */
@@ -907,7 +884,6 @@ static ctl_table unaligned_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec
 	},
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "user_reports",
@@ -923,7 +899,6 @@ static ctl_table unaligned_table[] = {
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec},
-#endif
 	{}
 };
 
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index d7d4991f32a..f53c76acaed 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -1,5 +1,178 @@
-#ifdef CONFIG_SUPERH32
-# include "vmlinux_32.lds.S"
+/*
+ * ld script to make SuperH Linux kernel
+ * Written by Niibe Yutaka and Paul Mundt
+ */
+#ifdef CONFIG_SUPERH64
+#define LOAD_OFFSET	CONFIG_PAGE_OFFSET
+OUTPUT_ARCH(sh:sh5)
 #else
-# include "vmlinux_64.lds.S"
+#define LOAD_OFFSET	0
+OUTPUT_ARCH(sh)
 #endif
+
+#include <asm/thread_info.h>
+#include <asm/cache.h>
+#include <asm-generic/vmlinux.lds.h>
+
+ENTRY(_start)
+SECTIONS
+{
+#ifdef CONFIG_PMB_FIXED
+	. = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
+	    CONFIG_ZERO_PAGE_OFFSET;
+#elif defined(CONFIG_32BIT)
+	. = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+#else
+	. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+#endif
+
+	_text = .;		/* Text and read-only data */
+
+	.empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) {
+		*(.empty_zero_page)
+	} = 0
+
+	.text : AT(ADDR(.text) - LOAD_OFFSET) {
+		HEAD_TEXT
+		TEXT_TEXT
+
+#ifdef CONFIG_SUPERH64
+		*(.text64)
+		*(.text..SHmedia32)
+#endif
+
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		IRQENTRY_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+		_etext = .;		/* End of text section */
+	} = 0x0009
+
+	. = ALIGN(16);		/* Exception table */
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	}
+
+	NOTES
+	RO_DATA(PAGE_SIZE)
+
+	/*
+	 * Code which must be executed uncached and the associated data
+	 */
+	. = ALIGN(PAGE_SIZE);
+	.uncached : AT(ADDR(.uncached) - LOAD_OFFSET) {
+		__uncached_start = .;
+		*(.uncached.text)
+		*(.uncached.data)
+		__uncached_end = .;
+	}
+
+	. = ALIGN(THREAD_SIZE);
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {		/* Data */
+		*(.data.init_task)
+
+		. = ALIGN(L1_CACHE_BYTES);
+		*(.data.cacheline_aligned)
+
+		. = ALIGN(L1_CACHE_BYTES);
+		*(.data.read_mostly)
+
+		. = ALIGN(PAGE_SIZE);
+		*(.data.page_aligned)
+
+		__nosave_begin = .;
+		*(.data.nosave)
+		. = ALIGN(PAGE_SIZE);
+		__nosave_end = .;
+
+		DATA_DATA
+		CONSTRUCTORS
+	}
+
+	_edata = .;			/* End of data section */
+
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+		__init_begin = .;
+		_sinittext = .;
+		INIT_TEXT
+		_einittext = .;
+	}
+
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA }
+
+	. = ALIGN(16);
+	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+		__setup_start = .;
+		*(.init.setup)
+		__setup_end = .;
+	}
+
+	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+		__initcall_start = .;
+		INITCALLS
+		__initcall_end = .;
+	}
+
+	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+
+	SECURITY_INIT
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	. = ALIGN(PAGE_SIZE);
+	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+	}
+#endif
+
+	. = ALIGN(4);
+	.machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
+		__machvec_start = .;
+		*(.machvec.init)
+		__machvec_end = .;
+	}
+
+	PERCPU(PAGE_SIZE)
+
+	/*
+	 * .exit.text is discarded at runtime, not link time, to deal with
+	 * references from __bug_table
+	 */
+	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT }
+	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
+
+	. = ALIGN(PAGE_SIZE);
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+		__init_end = .;
+		__bss_start = .;		/* BSS */
+		*(.bss.page_aligned)
+		*(.bss)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = .;			/* uClinux MTD sucks */
+		_end = . ;
+	}
+
+	/*
+	 * When something in the kernel is NOT compiled as a module, the
+	 * module cleanup code and data are put into these segments. Both
+	 * can then be thrown away, as cleanup code is never called unless
+	 * it's a module.
+	 */
+	/DISCARD/ : {
+		*(.exitcall.exit)
+	}
+
+	STABS_DEBUG
+	DWARF_DEBUG
+}
diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S
deleted file mode 100644
index dd9b2ee1312..00000000000
--- a/arch/sh/kernel/vmlinux_32.lds.S
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * ld script to make SuperH Linux kernel
- * Written by Niibe Yutaka
- */
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm-generic/vmlinux.lds.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-#else
-OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
-#endif
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-SECTIONS
-{
-#ifdef CONFIG_PMB_FIXED
-	. = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
-	    CONFIG_ZERO_PAGE_OFFSET;
-#elif defined(CONFIG_32BIT)
-	. = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-#else
-	. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
-#endif
-
-	_text = .;			/* Text and read-only data */
-
-	.empty_zero_page : {
-		*(.empty_zero_page)
-	} = 0
-
-	.text : {
-		HEAD_TEXT
-		TEXT_TEXT
-		SCHED_TEXT
-		LOCK_TEXT
-		KPROBES_TEXT
-		*(.fixup)
-		*(.gnu.warning)
-	} = 0x0009
-
-	. = ALIGN(16);		/* Exception table */
-	__start___ex_table = .;
-	__ex_table : { *(__ex_table) }
-	__stop___ex_table = .;
-
-	_etext = .;			/* End of text section */
-
-	NOTES
-	RO_DATA(PAGE_SIZE)
-
-	/*
-	 * Code which must be executed uncached and the associated data
-	 */
-	. = ALIGN(PAGE_SIZE);
-	__uncached_start = .;
-	.uncached.text : { *(.uncached.text) }
-	.uncached.data : { *(.uncached.data) }
-	__uncached_end = .;
-
-	. = ALIGN(THREAD_SIZE);
-	.data : {			/* Data */
-		*(.data.init_task)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.read_mostly)
-
-		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
-
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	_edata = .;			/* End of data section */
-
-	. = ALIGN(PAGE_SIZE);		/* Init code and data */
-	__init_begin = .;
-	_sinittext = .;
-	.init.text : { INIT_TEXT }
-	_einittext = .;
-	.init.data : { INIT_DATA }
-
-	. = ALIGN(16);
-	__setup_start = .;
-	.init.setup : { *(.init.setup) }
-	__setup_end = .;
-
-	__initcall_start = .;
-	.initcall.init : {
-		INITCALLS
-	}
-	__initcall_end = .;
-	__con_initcall_start = .;
-	.con_initcall.init : { *(.con_initcall.init) }
-	__con_initcall_end = .;
-
-	SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	__initramfs_start = .;
-	.init.ramfs : { *(.init.ramfs) }
-	__initramfs_end = .;
-#endif
-
-	. = ALIGN(4);
-	__machvec_start = .;
-	.machvec.init : { *(.machvec.init) }
-	__machvec_end = .;
-
-	PERCPU(PAGE_SIZE)
-
-	/*
-	 * .exit.text is discarded at runtime, not link time, to deal with
-	 * references from __bug_table
-	 */
-	.exit.text : { EXIT_TEXT }
-	.exit.data : { EXIT_DATA }
-
-	. = ALIGN(PAGE_SIZE);
-	.bss : {
-		__init_end = .;
-		__bss_start = .;		/* BSS */
-		*(.bss.page_aligned)
-		*(.bss)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = .;			/* uClinux MTD sucks */
-		_end = . ;
-	}
-
-	/*
-	 * When something in the kernel is NOT compiled as a module, the
-	 * module cleanup code and data are put into these segments. Both
-	 * can then be thrown away, as cleanup code is never called unless
-	 * it's a module.
-	 */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-	}
-
-	STABS_DEBUG
-	DWARF_DEBUG
-}
diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
deleted file mode 100644
index 69664460c68..00000000000
--- a/arch/sh/kernel/vmlinux_64.lds.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * ld script to make SH64 Linux kernel
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * benedict.gaster@superh.com:	 2nd May 2002
- *    Add definition of empty_zero_page to be the first page of kernel image.
- *
- * benedict.gaster@superh.com:	 3rd May 2002
- *    Added support for ramdisk, removing statically linked romfs at the
- *    same time.
- *
- * lethal@linux-sh.org:          9th May 2003
- *    Kill off GLOBAL_NAME() usage and other CDC-isms.
- *
- * lethal@linux-sh.org:         19th May 2003
- *    Remove support for ancient toolchains.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-
-#define LOAD_OFFSET	CONFIG_PAGE_OFFSET
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(sh:sh5)
-
-#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET)
-
-ENTRY(__start)
-SECTIONS
-{
-	. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE;
-	_text = .;			/* Text and read-only data */
-
-	.empty_zero_page : C_PHYS(.empty_zero_page) {
-		*(.empty_zero_page)
-	} = 0
-
-	.text : C_PHYS(.text) {
-		HEAD_TEXT
-		TEXT_TEXT
-		*(.text64)
-		*(.text..SHmedia32)
-		SCHED_TEXT
-		LOCK_TEXT
-		KPROBES_TEXT
-		*(.fixup)
-		*(.gnu.warning)
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	} = 0x6ff0fff0
-#else
-	} = 0xf0fff06f
-#endif
-
-	/* We likely want __ex_table to be Cache Line aligned */
-	. = ALIGN(L1_CACHE_BYTES);		/* Exception table */
-	__start___ex_table = .;
-	__ex_table : C_PHYS(__ex_table) { *(__ex_table) }
-	__stop___ex_table = .;
-
-	_etext = .;			/* End of text section */
-
-	NOTES 
-	RO_DATA(PAGE_SIZE)
-
-	. = ALIGN(THREAD_SIZE);
-	.data : C_PHYS(.data) {			/* Data */
-		*(.data.init_task)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.read_mostly)
-
-		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
-
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	_edata = .;			/* End of data section */
-
-	. = ALIGN(PAGE_SIZE);		/* Init code and data */
-	__init_begin = .;
-	_sinittext = .;
-	.init.text : C_PHYS(.init.text) { INIT_TEXT }
-	_einittext = .;
-	.init.data : C_PHYS(.init.data) { INIT_DATA }
-	. = ALIGN(L1_CACHE_BYTES);	/* Better if Cache Line aligned */
-	__setup_start = .;
-	.init.setup : C_PHYS(.init.setup) { *(.init.setup) }
-	__setup_end = .;
-	__initcall_start = .;
-	.initcall.init : C_PHYS(.initcall.init) {
-		INITCALLS
-	}
-	__initcall_end = .;
-	__con_initcall_start = .;
-	.con_initcall.init : C_PHYS(.con_initcall.init) {
-		*(.con_initcall.init)
-	}
-	__con_initcall_end = .;
-
-	SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	__initramfs_start = .;
-	.init.ramfs : C_PHYS(.init.ramfs) { *(.init.ramfs) }
-	__initramfs_end = .;
-#endif
-
-	. = ALIGN(8);
-	__machvec_start = .;
-	.machvec.init : C_PHYS(.machvec.init) { *(.machvec.init) }
-	__machvec_end = .;
-
-	PERCPU(PAGE_SIZE)
-
-	/*
-	 * .exit.text is discarded at runtime, not link time, to deal with
-	 * references from __bug_table
-	 */
-	.exit.text : C_PHYS(.exit.text) { EXIT_TEXT }
-	.exit.data : C_PHYS(.exit.data) { EXIT_DATA }
-
-	. = ALIGN(PAGE_SIZE);
-	.bss : C_PHYS(.bss) {
-		__init_end = .;
-		__bss_start = .;		/* BSS */
-		*(.bss.page_aligned)
-		*(.bss)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = .;			/* uClinux MTD sucks */
-		_end = . ;
-	}
-
-	/*
-	 * When something in the kernel is NOT compiled as a module, the
-	 * module cleanup code and data are put into these segments. Both
-	 * can then be thrown away, as cleanup code is never called unless
-	 * it's a module.
-	 */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-	}
-
-	STABS_DEBUG
-	DWARF_DEBUG
-}
diff --git a/arch/sh/lib64/.gitignore b/arch/sh/lib64/.gitignore
deleted file mode 100644
index 3508c2cb23c..00000000000
--- a/arch/sh/lib64/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-syscalltab.h
diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c
index 2fb8eaf6de6..6152a6a6d9c 100644
--- a/arch/sh/lib64/dbg.c
+++ b/arch/sh/lib64/dbg.c
@@ -135,140 +135,6 @@ void print_itlb(void)
 	    (" =============================================================\n");
 }
 
-/* ======================================================================= */
-
-#ifdef CONFIG_POOR_MANS_STRACE
-
-#include "syscalltab.h"
-
-struct ring_node {
-	int evt;
-	int ret_addr;
-	int event;
-	int tra;
-	int pid;
-	unsigned long sp;
-	unsigned long pc;
-};
-
-static struct ring_node event_ring[16];
-static int event_ptr = 0;
-
-struct stored_syscall_data {
-	int pid;
-	int syscall_number;
-};
-
-#define N_STORED_SYSCALLS 16
-
-static struct stored_syscall_data stored_syscalls[N_STORED_SYSCALLS];
-static int syscall_next=0;
-static int syscall_next_print=0;
-
-void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs)
-{
-	int syscallno = tra & 0xff;
-	unsigned long sp;
-	unsigned long stack_bottom;
-	int pid;
-	struct ring_node *rr;
-
-	pid = current->pid;
-	stack_bottom = (unsigned long) task_stack_page(current);
-	asm volatile("ori r15, 0, %0" : "=r" (sp));
-	rr = event_ring + event_ptr;
-	rr->evt = evt;
-	rr->ret_addr = ret_addr;
-	rr->event = event;
-	rr->tra = tra;
-	rr->pid = pid;
-	rr->sp = sp;
-	rr->pc = regs->pc;
-
-	if (sp < stack_bottom + 3092) {
-		int i, j;
-		printk("evt_debug : stack underflow report\n");
-		for (j=0, i = event_ptr; j<16; j++) {
-			rr = event_ring + i;
-			printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n",
-				rr->evt, rr->event, rr->tra, rr->pid, rr->sp, rr->pc);
-			i--;
-			i &= 15;
-		}
-		panic("STACK UNDERFLOW\n");
-	}
-
-	event_ptr = (event_ptr + 1) & 15;
-
-	if ((event == 2) && (evt == 0x160)) {
-		if (syscallno < NUM_SYSCALL_INFO_ENTRIES) {
-			/* Store the syscall information to print later.  We
-			 * can't print this now - currently we're running with
-			 * SR.BL=1, so we can't take a tlbmiss (which could occur
-			 * in the console drivers under printk).
-			 *
-			 * Just overwrite old entries on ring overflow - this
-			 * is only for last-hope debugging. */
-			stored_syscalls[syscall_next].pid = current->pid;
-			stored_syscalls[syscall_next].syscall_number = syscallno;
-			syscall_next++;
-			syscall_next &= (N_STORED_SYSCALLS - 1);
-		}
-	}
-}
-
-static void drain_syscalls(void) {
-	while (syscall_next_print != syscall_next) {
-		printk("Task %d: %s()\n",
-			stored_syscalls[syscall_next_print].pid,
-			syscall_info_table[stored_syscalls[syscall_next_print].syscall_number].name);
-			syscall_next_print++;
-			syscall_next_print &= (N_STORED_SYSCALLS - 1);
-	}
-}
-
-void evt_debug2(unsigned int ret)
-{
-	drain_syscalls();
-	printk("Task %d: syscall returns %08x\n", current->pid, ret);
-}
-
-void evt_debug_ret_from_irq(struct pt_regs *regs)
-{
-	int pid;
-	struct ring_node *rr;
-
-	pid = current->pid;
-	rr = event_ring + event_ptr;
-	rr->evt = 0xffff;
-	rr->ret_addr = 0;
-	rr->event = 0;
-	rr->tra = 0;
-	rr->pid = pid;
-	rr->pc = regs->pc;
-	event_ptr = (event_ptr + 1) & 15;
-}
-
-void evt_debug_ret_from_exc(struct pt_regs *regs)
-{
-	int pid;
-	struct ring_node *rr;
-
-	pid = current->pid;
-	rr = event_ring + event_ptr;
-	rr->evt = 0xfffe;
-	rr->ret_addr = 0;
-	rr->event = 0;
-	rr->tra = 0;
-	rr->pid = pid;
-	rr->pc = regs->pc;
-	event_ptr = (event_ptr + 1) & 15;
-}
-
-#endif /* CONFIG_POOR_MANS_STRACE */
-
-/* ======================================================================= */
-
 void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs)
 {
 
@@ -380,51 +246,3 @@ void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs)
 	print_dtlb();
 	print_itlb();
 }
-
-/* ======================================================================= */
-
-/*
-** Depending on <base> scan the MMU, Data or Instruction side
-** looking for a valid mapping matching Eaddr & asid.
-** Return -1 if not found or the TLB id entry otherwise.
-** Note: it works only for 4k pages!
-*/
-static unsigned long
-lookup_mmu_side(unsigned long base, unsigned long Eaddr, unsigned long asid)
-{
-	regType_t pteH;
-	unsigned long epn;
-	int count;
-
-	epn = Eaddr & 0xfffff000;
-
-	for (count = 0; count < MAX_TLBs; count++, base += TLB_STEP) {
-		pteH = getConfigReg(base);
-		if (GET_VALID(pteH))
-			if ((unsigned long) GET_EPN(pteH) == epn)
-				if ((unsigned long) GET_ASID(pteH) == asid)
-					break;
-	}
-	return ((unsigned long) ((count < MAX_TLBs) ? base : -1));
-}
-
-unsigned long lookup_dtlb(unsigned long Eaddr)
-{
-	unsigned long asid = get_asid();
-	return (lookup_mmu_side((u64) DTLB_BASE, Eaddr, asid));
-}
-
-unsigned long lookup_itlb(unsigned long Eaddr)
-{
-	unsigned long asid = get_asid();
-	return (lookup_mmu_side((u64) ITLB_BASE, Eaddr, asid));
-}
-
-void print_page(struct page *page)
-{
-	printk("  page[%p] -> index 0x%lx,  count 0x%x,  flags 0x%lx\n",
-	       page, page->index, page_count(page), page->flags);
-	printk("       address_space = %p, pages =%ld\n", page->mapping,
-	       page->mapping->nrpages);
-
-}
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index da32ba7b5fc..38c954e04f6 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -6,53 +6,10 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <cpu/registers.h>
-
-/* THIS IS A PHYSICAL ADDRESS */
-#define HDSP2534_ADDR (0x04002100)
-
-#ifdef CONFIG_SH_CAYMAN
-
-static void poor_mans_delay(void)
-{
-	int i;
-	for (i = 0; i < 2500000; i++) {
-	}		/* poor man's delay */
-}
-
-static void show_value(unsigned long x)
-{
-	int i;
-	unsigned nibble;
-	for (i = 0; i < 8; i++) {
-		nibble = ((x >> (i * 4)) & 0xf);
-
-		ctrl_outb(nibble + ((nibble > 9) ? 55 : 48),
-			  HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
-	}
-}
-
-#endif
-
 void
 panic_handler(unsigned long panicPC, unsigned long panicSSR,
 	      unsigned long panicEXPEVT)
 {
-#ifdef CONFIG_SH_CAYMAN
-	while (1) {
-		/* This piece of code displays the PC on the LED display */
-		show_value(panicPC);
-		poor_mans_delay();
-		show_value(panicSSR);
-		poor_mans_delay();
-		show_value(panicEXPEVT);
-		poor_mans_delay();
-	}
-#endif
-
 	/* Never return from the panic handler */
 	for (;;) ;
-
 }
diff --git a/arch/sh/lib64/sdivsi3.S b/arch/sh/lib64/sdivsi3.S
index 6a800c6a490..1963bbd4228 100644
--- a/arch/sh/lib64/sdivsi3.S
+++ b/arch/sh/lib64/sdivsi3.S
@@ -1,4 +1,6 @@
 	.global	__sdivsi3
+	.global	__sdivsi3_1
+	.global	__sdivsi3_2
 	.section	.text..SHmedia32,"ax"
 	.align	2
 
@@ -6,13 +8,15 @@
 	/* clobbered: r1,r18,r19,r20,r21,r25,tr0 */
 	/* result in r0 */
 __sdivsi3:
+__sdivsi3_1:
 	ptb __div_table,tr0
+	gettr tr0,r20
 
+__sdivsi3_2:
 	nsb r5, r1
 	shlld r5, r1, r25    /* normalize; [-2 ..1, 1..2) in s2.62 */
 	shari r25, 58, r21   /* extract 5(6) bit index (s2.4 with hole -1..1) */
 	/* bubble */
-	gettr tr0,r20
 	ldx.ub r20, r21, r19 /* u0.8 */
 	shari r25, 32, r25   /* normalize to s2.30 */
 	shlli r21, 1, r21
diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c
index d76bd801194..f215b063da7 100644
--- a/arch/sh/lib64/udelay.c
+++ b/arch/sh/lib64/udelay.c
@@ -33,7 +33,7 @@ void __delay(unsigned long loops)
 			     :"0"(loops));
 }
 
-inline void __const_udelay(unsigned long xloops)
+void __const_udelay(unsigned long xloops)
 {
 	__delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
 }
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index d4079cab2d5..2795618e4f0 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -21,6 +21,29 @@ config PAGE_OFFSET
 	default "0x20000000" if MMU && SUPERH64
 	default "0x00000000"
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	range 9 64 if PAGE_SIZE_16KB
+	default "9" if PAGE_SIZE_16KB
+	range 7 64 if PAGE_SIZE_64KB
+	default "7" if PAGE_SIZE_64KB
+	range 11 64
+	default "14" if !MMU
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB. Keep this in mind when
+	  choosing a value for this option.
+
 config MEMORY_START
 	hex "Physical memory start address"
 	default "0x08000000"
@@ -201,14 +224,6 @@ config PAGE_SIZE_64KB
 
 endchoice
 
-config ENTRY_OFFSET
-	hex
-	default "0x00001000" if PAGE_SIZE_4KB
-	default "0x00002000" if PAGE_SIZE_8KB
-	default "0x00004000" if PAGE_SIZE_16KB
-	default "0x00010000" if PAGE_SIZE_64KB
-	default "0x00000000"
-
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 9e277ec7d53..86762092508 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -60,7 +60,7 @@ static inline void sh64_teardown_dtlb_cache_slot(void)
 static inline void sh64_icache_inv_all(void)
 {
 	unsigned long long addr, flag, data;
-	unsigned int flags;
+	unsigned long flags;
 
 	addr = ICCR0;
 	flag = ICCR0_ICI;
@@ -172,7 +172,7 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 		unsigned long eaddr;
 		unsigned long after_last_page_start;
 		unsigned long mm_asid, current_asid;
-		unsigned long long flags = 0ULL;
+		unsigned long flags = 0;
 
 		mm_asid = cpu_asid(smp_processor_id(), mm);
 		current_asid = get_asid();
@@ -236,7 +236,7 @@ static void sh64_icache_inv_user_small_range(struct mm_struct *mm,
 	unsigned long long eaddr = start;
 	unsigned long long eaddr_end = start + len;
 	unsigned long current_asid, mm_asid;
-	unsigned long long flags;
+	unsigned long flags;
 	unsigned long long epage_start;
 
 	/*
@@ -342,7 +342,7 @@ static void inline sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
 			 * alloco is a NOP if the cache is write-through.
 			 */
 			if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
-				ctrl_inb(eaddr);
+				__raw_readb((unsigned long)eaddr);
 		}
 	}
 
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 3edf297c829..ee8e6bbe882 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -184,7 +184,6 @@ void __init paging_init(void)
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
-int after_bootmem = 0;
 
 void __init mem_init(void)
 {
@@ -217,8 +216,6 @@ void __init mem_init(void)
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
 
-	after_bootmem = 1;
-
 	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index 60cc486d2c2..da2f4186f2c 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -46,17 +46,15 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 		return NULL;
 
 	/*
-	 * If we're on an SH7751 or SH7780 PCI controller, PCI memory is
-	 * mapped at the end of the address space (typically 0xfd000000)
-	 * in a non-translatable area, so mapping through page tables for
-	 * this area is not only pointless, but also fundamentally
-	 * broken. Just return the physical address instead.
+	 * If we're in the fixed PCI memory range, mapping through page
+	 * tables is not only pointless, but also fundamentally broken.
+	 * Just return the physical address instead.
 	 *
 	 * For boards that map a small PCI memory aperture somewhere in
 	 * P1/P2 space, ioremap() will already do the right thing,
 	 * and we'll never get this far.
 	 */
-	if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
+	if (is_pci_memory_fixed_range(phys_addr, size))
 		return (void __iomem *)phys_addr;
 
 #if !defined(CONFIG_PMB_FIXED)
@@ -121,7 +119,9 @@ void __iounmap(void __iomem *addr)
 	unsigned long seg = PXSEG(vaddr);
 	struct vm_struct *p;
 
-	if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
+	if (seg < P3SEG || vaddr >= P3_ADDR_MAX)
+		return;
+	if (is_pci_memory_fixed_range(vaddr, 0))
 		return;
 
 #ifdef CONFIG_PMB
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 31e1bb5effb..828c8597219 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/bootmem.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/addrspace.h>
@@ -27,88 +28,17 @@
 #include <asm/tlbflush.h>
 #include <asm/mmu.h>
 
-static void shmedia_mapioaddr(unsigned long, unsigned long);
-static unsigned long shmedia_ioremap(struct resource *, u32, int);
-
-/*
- * Generic mapping function (not visible outside):
- */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void *__ioremap(unsigned long phys_addr, unsigned long size,
-		unsigned long flags)
-{
-	void * addr;
-	struct vm_struct * area;
-	unsigned long offset, last_addr;
-	pgprot_t pgprot;
-
-	/* Don't allow wraparound or zero size */
-	last_addr = phys_addr + size - 1;
-	if (!size || last_addr < phys_addr)
-		return NULL;
-
-	pgprot = __pgprot(_PAGE_PRESENT  | _PAGE_READ   |
-			  _PAGE_WRITE    | _PAGE_DIRTY  |
-			  _PAGE_ACCESSED | _PAGE_SHARED | flags);
-
-	/*
-	 * Mappings have to be page-aligned
-	 */
-	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
-	size = PAGE_ALIGN(last_addr + 1) - phys_addr;
-
-	/*
-	 * Ok, go for it..
-	 */
-	area = get_vm_area(size, VM_IOREMAP);
-	if (!area)
-		return NULL;
-	pr_debug("Get vm_area returns %p addr %p\n", area, area->addr);
-	area->phys_addr = phys_addr;
-	addr = area->addr;
-	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
-			       phys_addr, pgprot)) {
-		vunmap(addr);
-		return NULL;
-	}
-	return (void *) (offset + (char *)addr);
-}
-EXPORT_SYMBOL(__ioremap);
-
-void __iounmap(void *addr)
-{
-	struct vm_struct *area;
-
-	vfree((void *) (PAGE_MASK & (unsigned long) addr));
-	area = remove_vm_area((void *) (PAGE_MASK & (unsigned long) addr));
-	if (!area) {
-		printk(KERN_ERR "iounmap: bad address %p\n", addr);
-		return;
-	}
-
-	kfree(area);
-}
-EXPORT_SYMBOL(__iounmap);
-
 static struct resource shmedia_iomap = {
 	.name	= "shmedia_iomap",
 	.start	= IOBASE_VADDR + PAGE_SIZE,
 	.end	= IOBASE_END - 1,
 };
 
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va);
+static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
+			      unsigned long flags);
 static void shmedia_unmapioaddr(unsigned long vaddr);
-static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz);
+static void __iomem *shmedia_ioremap(struct resource *res, u32 pa,
+				     int sz, unsigned long flags);
 
 /*
  * We have the same problem as the SPARC, so lets have the same comment:
@@ -130,18 +60,18 @@ static struct xresource xresv[XNRES];
 
 static struct xresource *xres_alloc(void)
 {
-        struct xresource *xrp;
-        int n;
-
-        xrp = xresv;
-        for (n = 0; n < XNRES; n++) {
-                if (xrp->xflag == 0) {
-                        xrp->xflag = 1;
-                        return xrp;
-                }
-                xrp++;
-        }
-        return NULL;
+	struct xresource *xrp;
+	int n;
+
+	xrp = xresv;
+	for (n = 0; n < XNRES; n++) {
+		if (xrp->xflag == 0) {
+			xrp->xflag = 1;
+			return xrp;
+		}
+		xrp++;
+	}
+	return NULL;
 }
 
 static void xres_free(struct xresource *xrp)
@@ -161,76 +91,71 @@ static struct resource *shmedia_find_resource(struct resource *root,
 	return NULL;
 }
 
-static unsigned long shmedia_alloc_io(unsigned long phys, unsigned long size,
-				      const char *name)
+static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
+				      const char *name, unsigned long flags)
 {
-        static int printed_full = 0;
-        struct xresource *xres;
-        struct resource *res;
-        char *tack;
-        int tlen;
-
-        if (name == NULL) name = "???";
-
-        if ((xres = xres_alloc()) != 0) {
-                tack = xres->xname;
-                res = &xres->xres;
-        } else {
-                if (!printed_full) {
-                        printk("%s: done with statics, switching to kmalloc\n",
-			       __func__);
-                        printed_full = 1;
-                }
-                tlen = strlen(name);
-                tack = kmalloc(sizeof (struct resource) + tlen + 1, GFP_KERNEL);
-                if (!tack)
-			return -ENOMEM;
-                memset(tack, 0, sizeof(struct resource));
-                res = (struct resource *) tack;
-                tack += sizeof (struct resource);
-        }
-
-        strncpy(tack, name, XNMLN);
-        tack[XNMLN] = 0;
-        res->name = tack;
-
-        return shmedia_ioremap(res, phys, size);
+	static int printed_full;
+	struct xresource *xres;
+	struct resource *res;
+	char *tack;
+	int tlen;
+
+	if (name == NULL)
+		name = "???";
+
+	xres = xres_alloc();
+	if (xres != 0) {
+		tack = xres->xname;
+		res = &xres->xres;
+	} else {
+		if (!printed_full) {
+			printk(KERN_NOTICE "%s: done with statics, "
+			       "switching to kmalloc\n", __func__);
+			printed_full = 1;
+		}
+		tlen = strlen(name);
+		tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
+		if (!tack)
+			return NULL;
+		memset(tack, 0, sizeof(struct resource));
+		res = (struct resource *) tack;
+		tack += sizeof(struct resource);
+	}
+
+	strncpy(tack, name, XNMLN);
+	tack[XNMLN] = 0;
+	res->name = tack;
+
+	return shmedia_ioremap(res, phys, size, flags);
 }
 
-static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz)
+static void __iomem *shmedia_ioremap(struct resource *res, u32 pa, int sz,
+				     unsigned long flags)
 {
-        unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
+	unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
 	unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK;
-        unsigned long va;
-        unsigned int psz;
+	unsigned long va;
+	unsigned int psz;
 
-        if (allocate_resource(&shmedia_iomap, res, round_sz,
+	if (allocate_resource(&shmedia_iomap, res, round_sz,
 			      shmedia_iomap.start, shmedia_iomap.end,
 			      PAGE_SIZE, NULL, NULL) != 0) {
-                panic("alloc_io_res(%s): cannot occupy\n",
-                    (res->name != NULL)? res->name: "???");
-        }
+		panic("alloc_io_res(%s): cannot occupy\n",
+		      (res->name != NULL) ? res->name : "???");
+	}
 
-        va = res->start;
-        pa &= PAGE_MASK;
+	va = res->start;
+	pa &= PAGE_MASK;
 
 	psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
 
-	/* log at boot time ... */
-	printk("mapioaddr: %6s  [%2d page%s]  va 0x%08lx   pa 0x%08x\n",
-	       ((res->name != NULL) ? res->name : "???"),
-	       psz, psz == 1 ? " " : "s", va, pa);
-
-        for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
-                shmedia_mapioaddr(pa, va);
-                va += PAGE_SIZE;
-                pa += PAGE_SIZE;
-        }
-
-        res->start += offset;
-        res->end = res->start + sz - 1;         /* not strictly necessary.. */
+	for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
+		shmedia_mapioaddr(pa, va, flags);
+		va += PAGE_SIZE;
+		pa += PAGE_SIZE;
+	}
 
-        return res->start;
+	return (void __iomem *)(unsigned long)(res->start + offset);
 }
 
 static void shmedia_free_io(struct resource *res)
@@ -249,14 +174,12 @@ static void shmedia_free_io(struct resource *res)
 
 static __init_refok void *sh64_get_page(void)
 {
-	extern int after_bootmem;
 	void *page;
 
-	if (after_bootmem) {
-		page = (void *)get_zeroed_page(GFP_ATOMIC);
-	} else {
+	if (slab_is_available())
+		page = (void *)get_zeroed_page(GFP_KERNEL);
+	else
 		page = alloc_bootmem_pages(PAGE_SIZE);
-	}
 
 	if (!page || ((unsigned long)page & ~PAGE_MASK))
 		panic("sh64_get_page: Out of memory already?\n");
@@ -264,17 +187,20 @@ static __init_refok void *sh64_get_page(void)
 	return page;
 }
 
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va)
+static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
+			      unsigned long flags)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep, pte;
 	pgprot_t prot;
-	unsigned long flags = 1; /* 1 = CB0-1 device */
 
 	pr_debug("shmedia_mapiopage pa %08lx va %08lx\n",  pa, va);
 
+	if (!flags)
+		flags = 1; /* 1 = CB0-1 device */
+
 	pgdp = pgd_offset_k(va);
 	if (pgd_none(*pgdp) || !pgd_present(*pgdp)) {
 		pudp = (pud_t *)sh64_get_page();
@@ -288,7 +214,7 @@ static void shmedia_mapioaddr(unsigned long pa, unsigned long va)
 	}
 
 	pmdp = pmd_offset(pudp, va);
-	if (pmd_none(*pmdp) || !pmd_present(*pmdp) ) {
+	if (pmd_none(*pmdp) || !pmd_present(*pmdp)) {
 		ptep = (pte_t *)sh64_get_page();
 		set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE));
 	}
@@ -336,17 +262,19 @@ static void shmedia_unmapioaddr(unsigned long vaddr)
 	pte_clear(&init_mm, vaddr, ptep);
 }
 
-unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *name)
+void __iomem *__ioremap(unsigned long offset, unsigned long size,
+			unsigned long flags)
 {
-	if (size < PAGE_SIZE)
-		size = PAGE_SIZE;
+	char name[14];
 
-	return shmedia_alloc_io(phys, size, name);
+	sprintf(name, "phys_%08x", (u32)offset);
+	return shmedia_alloc_io(offset, size, name, flags);
 }
-EXPORT_SYMBOL(onchip_remap);
+EXPORT_SYMBOL(__ioremap);
 
-void onchip_unmap(unsigned long vaddr)
+void __iounmap(void __iomem *virtual)
 {
+	unsigned long vaddr = (unsigned long)virtual & PAGE_MASK;
 	struct resource *res;
 	unsigned int psz;
 
@@ -357,10 +285,7 @@ void onchip_unmap(unsigned long vaddr)
 		return;
 	}
 
-        psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
-
-        printk(KERN_DEBUG "unmapioaddr: %6s  [%2d page%s] freed\n",
-	       res->name, psz, psz == 1 ? " " : "s");
+	psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
 
 	shmedia_free_io(res);
 
@@ -371,9 +296,8 @@ void onchip_unmap(unsigned long vaddr)
 		kfree(res);
 	}
 }
-EXPORT_SYMBOL(onchip_unmap);
+EXPORT_SYMBOL(__iounmap);
 
-#ifdef CONFIG_PROC_FS
 static int
 ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
 		  void *data)
@@ -385,7 +309,10 @@ ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
 	for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
 		if (p + 32 >= e)        /* Better than nothing */
 			break;
-		if ((nm = r->name) == 0) nm = "???";
+		nm = r->name;
+		if (nm == NULL)
+			nm = "???";
+
 		p += sprintf(p, "%08lx-%08lx: %s\n",
 			     (unsigned long)r->start,
 			     (unsigned long)r->end, nm);
@@ -393,14 +320,11 @@ ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
 
 	return p-buf;
 }
-#endif /* CONFIG_PROC_FS */
 
 static int __init register_proc_onchip(void)
 {
-#ifdef CONFIG_PROC_FS
-	create_proc_read_entry("io_map",0,0, ioremap_proc_info, &shmedia_iomap);
-#endif
+	create_proc_read_entry("io_map", 0, 0, ioremap_proc_info,
+			       &shmedia_iomap);
 	return 0;
 }
-
-__initcall(register_proc_onchip);
+late_initcall(register_proc_onchip);
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
index 931f4d003fa..1b5fdfb4e0c 100644
--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/mm/mmap.c
  *
- * Copyright (C) 2008  Paul Mundt
+ * Copyright (C) 2008 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -21,9 +21,26 @@ EXPORT_SYMBOL(shm_align_mask);
 /*
  * To avoid cache aliases, we map the shared page with same color.
  */
-#define COLOUR_ALIGN(addr, pgoff)				\
-	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
-	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
+static inline unsigned long COLOUR_ALIGN(unsigned long addr,
+					 unsigned long pgoff)
+{
+	unsigned long base = (addr + shm_align_mask) & ~shm_align_mask;
+	unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
+
+	return base + off;
+}
+
+static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr,
+					      unsigned long pgoff)
+{
+	unsigned long base = addr & ~shm_align_mask;
+	unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
+
+	if (base + off <= addr)
+		return base + off;
+
+	return base - off;
+}
 
 unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	unsigned long len, unsigned long pgoff, unsigned long flags)
@@ -103,6 +120,117 @@ full_search:
 			addr = COLOUR_ALIGN(addr, pgoff);
 	}
 }
+
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+			  const unsigned long len, const unsigned long pgoff,
+			  const unsigned long flags)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	unsigned long addr = addr0;
+	int do_colour_align;
+
+	if (flags & MAP_FIXED) {
+		/* We do not accept a shared mapping if it would violate
+		 * cache aliasing constraints.
+		 */
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (unlikely(len > TASK_SIZE))
+		return -ENOMEM;
+
+	do_colour_align = 0;
+	if (filp || (flags & MAP_SHARED))
+		do_colour_align = 1;
+
+	/* requesting a specific address */
+	if (addr) {
+		if (do_colour_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vma->vm_start))
+			return addr;
+	}
+
+	/* check if free_area_cache is useful for us */
+	if (len <= mm->cached_hole_size) {
+	        mm->cached_hole_size = 0;
+		mm->free_area_cache = mm->mmap_base;
+	}
+
+	/* either no address requested or can't fit in requested address hole */
+	addr = mm->free_area_cache;
+	if (do_colour_align) {
+		unsigned long base = COLOUR_ALIGN_DOWN(addr-len, pgoff);
+
+		addr = base + len;
+	}
+
+	/* make sure it can fit in the remaining address space */
+	if (likely(addr > len)) {
+		vma = find_vma(mm, addr-len);
+		if (!vma || addr <= vma->vm_start) {
+			/* remember the address as a hint for next time */
+			return (mm->free_area_cache = addr-len);
+		}
+	}
+
+	if (unlikely(mm->mmap_base < len))
+		goto bottomup;
+
+	addr = mm->mmap_base-len;
+	if (do_colour_align)
+		addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+
+	do {
+		/*
+		 * Lookup failure means no vma is above this address,
+		 * else if new region fits below vma->vm_start,
+		 * return with success:
+		 */
+		vma = find_vma(mm, addr);
+		if (likely(!vma || addr+len <= vma->vm_start)) {
+			/* remember the address as a hint for next time */
+			return (mm->free_area_cache = addr);
+		}
+
+		/* remember the largest hole we saw so far */
+		if (addr + mm->cached_hole_size < vma->vm_start)
+		        mm->cached_hole_size = vma->vm_start - addr;
+
+		/* try just below the current vma->vm_start */
+		addr = vma->vm_start-len;
+		if (do_colour_align)
+			addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+	} while (likely(len < vma->vm_start));
+
+bottomup:
+	/*
+	 * A failed mmap() very likely causes application failure,
+	 * so fall back to the bottom-up function here. This scenario
+	 * can happen with large stack limits and large mmap()
+	 * allocations.
+	 */
+	mm->cached_hole_size = ~0UL;
+	mm->free_area_cache = TASK_UNMAPPED_BASE;
+	addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
+	/*
+	 * Restore the topdown base:
+	 */
+	mm->free_area_cache = mm->mmap_base;
+	mm->cached_hole_size = ~0UL;
+
+	return addr;
+}
 #endif /* CONFIG_MMU */
 
 /*
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index 1b9d4304b3b..44f4e31c6d6 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -109,6 +109,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_SH7785:
 	case CPU_SH7786:
 	case CPU_SH7723:
+	case CPU_SH7724:
 	case CPU_SHX3:
 		lmodel = &op_model_sh4a_ops;
 		break;
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 8477b5d884f..fec3a53b865 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -23,6 +23,7 @@ HD64461			HD64461
 7619SE			SH_7619_SOLUTION_ENGINE
 7721SE			SH_7721_SOLUTION_ENGINE
 7722SE			SH_7722_SOLUTION_ENGINE
+7724SE			SH_7724_SOLUTION_ENGINE
 7751SE			SH_7751_SOLUTION_ENGINE
 7780SE			SH_7780_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index bb91b1248cd..f0d343c3b95 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -161,5 +161,5 @@ static inline int __atomic24_sub(int i, atomic24_t *v)
 
 #endif /* !(__KERNEL__) */
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index a0a70649269..f2e48009989 100644
--- a/arch/sparc/include/asm/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -114,5 +114,5 @@ static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/arch/sparc/include/asm/bitsperlong.h b/arch/sparc/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..40dcaa3aaa5
--- /dev/null
+++ b/arch/sparc/include/asm/bitsperlong.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ALPHA_BITSPERLONG_H
+#define __ASM_ALPHA_BITSPERLONG_H
+
+#if defined(__sparc__) && defined(__arch64__)
+#define __BITS_PER_LONG 64
+#else
+#define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_ALPHA_BITSPERLONG_H */
+
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 425c2f9be6d..d42e393078c 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -208,8 +208,9 @@ do {	unsigned long new_flags = current_thread_info()->flags; \
 	else						\
 		clear_thread_flag(TIF_ABI_PENDING);	\
 	/* flush_thread will update pgd cache */	\
-	if (current->personality != PER_LINUX32)	\
-		set_personality(PER_LINUX);		\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX |		\
+			(current->personality & (~PER_MASK)));	\
 } while (0)
 
 #endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
index fdfbbf0a473..988192e8e95 100644
--- a/arch/sparc/include/asm/mman.h
+++ b/arch/sparc/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef __SPARC_MMAN_H__
 #define __SPARC_MMAN_H__
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 /* SunOS'ified... */
 
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index d1806edc095..f72080bdda9 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -152,6 +152,6 @@ extern unsigned long pfn_base;
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index 4274ed13ddb..f0d09b40103 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -132,6 +132,6 @@ typedef struct page *pgtable_t;
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
index cba45206b7f..e49b828a247 100644
--- a/arch/sparc/include/asm/signal.h
+++ b/arch/sparc/include/asm/signal.h
@@ -176,7 +176,7 @@ struct sigstack {
 #define SA_STATIC_ALLOC         0x8000
 #endif
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 struct __new_sigaction {
 	__sighandler_t		sa_handler;
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 639ac805448..65865726b28 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -102,8 +102,8 @@ struct thread_info {
 #define TI_KERN_CNTD1	0x00000488
 #define TI_PCR		0x00000490
 #define TI_RESTART_BLOCK 0x00000498
-#define TI_KUNA_REGS	0x000004c0
-#define TI_KUNA_INSN	0x000004c8
+#define TI_KUNA_REGS	0x000004c8
+#define TI_KUNA_INSN	0x000004d0
 #define TI_FPREGS	0x00000500
 
 /* We embed this in the uppermost byte of thread_info->flags */
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index 2237118825d..de671d73bae 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -21,8 +21,6 @@ typedef unsigned short umode_t;
 
 #ifdef __KERNEL__
 
-#define BITS_PER_LONG 64
-
 #ifndef __ASSEMBLY__
 
 /* Dma addresses come in generic and 64-bit flavours.  */
@@ -46,8 +44,6 @@ typedef unsigned short umode_t;
 
 #ifdef __KERNEL__
 
-#define BITS_PER_LONG 32
-
 #ifndef __ASSEMBLY__
 
 typedef u32 dma_addr_t;
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 47d5619d43f..8303ac48103 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -17,6 +17,9 @@
 
 #ifndef __ASSEMBLY__
 
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
 /* Sparc is not segmented, however we need to be able to fool access_ok()
  * when doing system calls from kernel mode legitimately.
  *
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index c64e767a3e4..a38c0323891 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -12,7 +12,7 @@
 #include <asm/asi.h>
 #include <asm/system.h>
 #include <asm/spitfire.h>
-#include <asm-generic/uaccess.h>
+#include <asm-generic/uaccess-unaligned.h>
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index 5deabe921a4..e5e78f9cfc9 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -318,10 +318,12 @@ static void sun4u_irq_enable(unsigned int virt_irq)
 	}
 }
 
-static void sun4u_set_affinity(unsigned int virt_irq,
+static int sun4u_set_affinity(unsigned int virt_irq,
 			       const struct cpumask *mask)
 {
 	sun4u_irq_enable(virt_irq);
+
+	return 0;
 }
 
 /* Don't do anything.  The desc->status check for IRQ_DISABLED in
@@ -377,7 +379,7 @@ static void sun4v_irq_enable(unsigned int virt_irq)
 		       ino, err);
 }
 
-static void sun4v_set_affinity(unsigned int virt_irq,
+static int sun4v_set_affinity(unsigned int virt_irq,
 			       const struct cpumask *mask)
 {
 	unsigned int ino = virt_irq_table[virt_irq].dev_ino;
@@ -388,6 +390,8 @@ static void sun4v_set_affinity(unsigned int virt_irq,
 	if (err != HV_EOK)
 		printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): "
 		       "err(%d)\n", ino, cpuid, err);
+
+	return 0;
 }
 
 static void sun4v_irq_disable(unsigned int virt_irq)
@@ -445,7 +449,7 @@ static void sun4v_virq_enable(unsigned int virt_irq)
 		       dev_handle, dev_ino, err);
 }
 
-static void sun4v_virt_set_affinity(unsigned int virt_irq,
+static int sun4v_virt_set_affinity(unsigned int virt_irq,
 				    const struct cpumask *mask)
 {
 	unsigned long cpuid, dev_handle, dev_ino;
@@ -461,6 +465,8 @@ static void sun4v_virt_set_affinity(unsigned int virt_irq,
 		printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): "
 		       "err(%d)\n",
 		       dev_handle, dev_ino, cpuid, err);
+
+	return 0;
 }
 
 static void sun4v_virq_disable(unsigned int virt_irq)
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 90273765e81..0ee642f6323 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -75,8 +75,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
 }
 
 /* Make generic code ignore STT_REGISTER dummy undefined symbols.  */
diff --git a/arch/sparc/lib/csum_copy_from_user.S b/arch/sparc/lib/csum_copy_from_user.S
index a22eddbe5db..e0304e6a224 100644
--- a/arch/sparc/lib/csum_copy_from_user.S
+++ b/arch/sparc/lib/csum_copy_from_user.S
@@ -5,7 +5,7 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
+	.section .fixup, "ax";	\
 	.align 4;		\
 99:	retl;			\
 	 mov	-1, %o0;	\
diff --git a/arch/sparc/lib/csum_copy_to_user.S b/arch/sparc/lib/csum_copy_to_user.S
index d5b12f441f0..afd01acc587 100644
--- a/arch/sparc/lib/csum_copy_to_user.S
+++ b/arch/sparc/lib/csum_copy_to_user.S
@@ -5,7 +5,7 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
+	.section .fixup,"ax";	\
 	.align 4;		\
 99:	retl;			\
 	 mov	-1, %o0;	\
diff --git a/arch/sparc/mm/extable.c b/arch/sparc/mm/extable.c
index 16cc28935e3..a61c349448e 100644
--- a/arch/sparc/mm/extable.c
+++ b/arch/sparc/mm/extable.c
@@ -28,6 +28,10 @@ search_extable(const struct exception_table_entry *start,
 	 *	word 3: last insn address + 4 bytes
 	 *	word 4: fixup code address
 	 *
+	 * Deleted entries are encoded as:
+	 *	word 1: unused
+	 *	word 2: -1
+	 *
 	 * See asm/uaccess.h for more details.
 	 */
 
@@ -39,6 +43,10 @@ search_extable(const struct exception_table_entry *start,
 			continue;
 		}
 
+		/* A deleted entry; see trim_init_extable */
+		if (walk->fixup == -1)
+			continue;
+
 		if (walk->insn == value)
 			return walk;
 	}
@@ -57,6 +65,27 @@ search_extable(const struct exception_table_entry *start,
         return NULL;
 }
 
+#ifdef CONFIG_MODULES
+/* We could memmove them around; easier to mark the trimmed ones. */
+void trim_init_extable(struct module *m)
+{
+	unsigned int i;
+	bool range;
+
+	for (i = 0; i < m->num_exentries; i += range ? 2 : 1) {
+		range = m->extable[i].fixup == 0;
+
+		if (within_module_init(m->extable[i].insn, m)) {
+			m->extable[i].fixup = -1;
+			if (range)
+				m->extable[i+1].fixup = -1;
+		}
+		if (range)
+			i++;
+	}
+}
+#endif /* CONFIG_MODULES */
+
 /* Special extable search, which handles ranges.  Returns fixup */
 unsigned long search_extables_range(unsigned long addr, unsigned long *g2)
 {
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index f934225fd8e..aa9e926e13d 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -451,23 +451,6 @@ static void do_ubd_request(struct request_queue * q);
 
 /* Only changed by ubd_init, which is an initcall. */
 static int thread_fd = -1;
-
-static void ubd_end_request(struct request *req, int bytes, int error)
-{
-	blk_end_request(req, error, bytes);
-}
-
-/* Callable only from interrupt context - otherwise you need to do
- * spin_lock_irq()/spin_lock_irqsave() */
-static inline void ubd_finish(struct request *req, int bytes)
-{
-	if(bytes < 0){
-		ubd_end_request(req, 0, -EIO);
-		return;
-	}
-	ubd_end_request(req, bytes, 0);
-}
-
 static LIST_HEAD(restart);
 
 /* XXX - move this inside ubd_intr. */
@@ -475,7 +458,6 @@ static LIST_HEAD(restart);
 static void ubd_handler(void)
 {
 	struct io_thread_req *req;
-	struct request *rq;
 	struct ubd *ubd;
 	struct list_head *list, *next_ele;
 	unsigned long flags;
@@ -492,10 +474,7 @@ static void ubd_handler(void)
 			return;
 		}
 
-		rq = req->req;
-		rq->nr_sectors -= req->length >> 9;
-		if(rq->nr_sectors == 0)
-			ubd_finish(rq, rq->hard_nr_sectors << 9);
+		blk_end_request(req->req, 0, req->length);
 		kfree(req);
 	}
 	reactivate_fd(thread_fd, UBD_IRQ);
@@ -1243,27 +1222,26 @@ static void do_ubd_request(struct request_queue *q)
 {
 	struct io_thread_req *io_req;
 	struct request *req;
-	int n, last_sectors;
+	sector_t sector;
+	int n;
 
 	while(1){
 		struct ubd *dev = q->queuedata;
 		if(dev->end_sg == 0){
-			struct request *req = elv_next_request(q);
+			struct request *req = blk_fetch_request(q);
 			if(req == NULL)
 				return;
 
 			dev->request = req;
-			blkdev_dequeue_request(req);
 			dev->start_sg = 0;
 			dev->end_sg = blk_rq_map_sg(q, req, dev->sg);
 		}
 
 		req = dev->request;
-		last_sectors = 0;
+		sector = blk_rq_pos(req);
 		while(dev->start_sg < dev->end_sg){
 			struct scatterlist *sg = &dev->sg[dev->start_sg];
 
-			req->sector += last_sectors;
 			io_req = kmalloc(sizeof(struct io_thread_req),
 					 GFP_ATOMIC);
 			if(io_req == NULL){
@@ -1272,10 +1250,10 @@ static void do_ubd_request(struct request_queue *q)
 				return;
 			}
 			prepare_request(req, io_req,
-					(unsigned long long) req->sector << 9,
+					(unsigned long long)sector << 9,
 					sg->offset, sg->length, sg_page(sg));
 
-			last_sectors = sg->length >> 9;
+			sector += sg->length >> 9;
 			n = os_write_file(thread_fd, &io_req,
 					  sizeof(struct io_thread_req *));
 			if(n != sizeof(struct io_thread_req *)){
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
index 55f28a0bae6..4cc9b6cf480 100644
--- a/arch/um/include/asm/page.h
+++ b/arch/um/include/asm/page.h
@@ -116,7 +116,7 @@ extern unsigned long uml_physmem;
 #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #endif	/* __ASSEMBLY__ */
 #endif	/* __UM_PAGE_H */
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 58da2480a7f..9ce3f165111 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -53,16 +53,21 @@ extern unsigned long end_iomem;
 #else
 # define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
 #endif
+#define MODULES_VADDR	VMALLOC_START
+#define MODULES_END	VMALLOC_END
+#define MODULES_LEN	(MODULES_VADDR - MODULES_END)
 
 #define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
+#define __PAGE_KERNEL_EXEC                                              \
+	 (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
 #define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
 #define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+#define PAGE_KERNEL_EXEC	__pgprot(__PAGE_KERNEL_EXEC)
 
 /*
  * The i386 can't do page protection for execute, and considers that the same
diff --git a/arch/um/include/asm/suspend.h b/arch/um/include/asm/suspend.h
deleted file mode 100644
index f4e8e007f46..00000000000
--- a/arch/um/include/asm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __UM_SUSPEND_H
-#define __UM_SUSPEND_H
-
-#endif
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 598b5c1903a..1b549bca464 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -8,7 +8,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 
 subarch-obj-y = lib/semaphore_32.o lib/string_32.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module_32.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 USER_OBJS := bugs.o ptrace_user.o fault.o
 
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index c8b4cce9cfe..2201e9c20e4 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -8,10 +8,8 @@ obj-y = bug.o bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
 	setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
 	sysrq.o ksyms.o tls.o
 
-obj-$(CONFIG_MODULES) += um_module.o
-
 subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module_64.o
+subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 ldt-y = ../sys-i386/ldt.o
 
diff --git a/arch/um/sys-x86_64/um_module.c b/arch/um/sys-x86_64/um_module.c
deleted file mode 100644
index 3dead392a41..00000000000
--- a/arch/um/sys-x86_64/um_module.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-
-/* Copied from i386 arch/i386/kernel/module.c */
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc_exec(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/*
-	 * FIXME: If module_region == mod->init_region, trim exception
-	 * table entries.
-	 */
-}
-
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
new file mode 100644
index 00000000000..ad8ec356fb3
--- /dev/null
+++ b/arch/x86/Kbuild
@@ -0,0 +1,16 @@
+
+obj-$(CONFIG_KVM) += kvm/
+
+# Xen paravirtualization support
+obj-$(CONFIG_XEN) += xen/
+
+# lguest paravirtualization support
+obj-$(CONFIG_LGUEST_GUEST) += lguest/
+
+obj-y += kernel/
+obj-y += mm/
+
+obj-y += crypto/
+obj-y += vdso/
+obj-$(CONFIG_IA32_EMULATION) += ia32/
+
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index df9e885eee1..356d2ec8e2f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -47,6 +47,11 @@ config X86
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 
+config OUTPUT_FORMAT
+	string
+	default "elf32-i386" if X86_32
+	default "elf64-x86-64" if X86_64
+
 config ARCH_DEFCONFIG
 	string
 	default "arch/x86/configs/i386_defconfig" if X86_32
@@ -274,15 +279,9 @@ config SPARSE_IRQ
 
 	  If you don't know what to do here, say N.
 
-config NUMA_MIGRATE_IRQ_DESC
-	bool "Move irq desc when changing irq smp_affinity"
+config NUMA_IRQ_DESC
+	def_bool y
 	depends on SPARSE_IRQ && NUMA
-	depends on BROKEN
-	default n
-	---help---
-	  This enables moving irq_desc to cpu/node that irq will use handled.
-
-	  If you don't know what to do here, say N.
 
 config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
@@ -355,7 +354,7 @@ config X86_UV
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
 	depends on NUMA
-	select X86_X2APIC
+	depends on X86_X2APIC
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
@@ -498,6 +497,19 @@ config PARAVIRT
 	  over full virtualization.  However, when run without a hypervisor
 	  the kernel is theoretically slower and slightly larger.
 
+config PARAVIRT_SPINLOCKS
+	bool "Paravirtualization layer for spinlocks"
+	depends on PARAVIRT && SMP && EXPERIMENTAL
+	---help---
+	  Paravirtualized spinlocks allow a pvops backend to replace the
+	  spinlock implementation with something virtualization-friendly
+	  (for example, block the virtual CPU rather than spinning).
+
+	  Unfortunately the downside is an up to 5% performance hit on
+	  native kernels, with various workloads.
+
+	  If you are unsure how to answer this question, answer N.
+
 config PARAVIRT_CLOCK
 	bool
 	default n
@@ -727,6 +739,7 @@ config X86_UP_IOAPIC
 config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
+	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 
 config X86_IO_APIC
 	def_bool y
@@ -776,10 +789,26 @@ config X86_MCE
 	  to disable it.  MCE support simply ignores non-MCE processors like
 	  the 386 and 486, so nearly everyone can say Y here.
 
+config X86_OLD_MCE
+	depends on X86_32 && X86_MCE
+	bool "Use legacy machine check code (will go away)"
+	default n
+	select X86_ANCIENT_MCE
+	---help---
+	  Use the old i386 machine check code. This is merely intended for
+	  testing in a transition period. Try this if you run into any machine
+	  check related software problems, but report the problem to
+	  linux-kernel.  When in doubt say no.
+
+config X86_NEW_MCE
+	depends on X86_MCE
+	bool
+	default y if (!X86_OLD_MCE && X86_32) || X86_64
+
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	depends on X86_NEW_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -787,19 +816,36 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	depends on X86_NEW_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
+config X86_ANCIENT_MCE
+	def_bool n
+	depends on X86_32
+	prompt "Support for old Pentium 5 / WinChip machine checks"
+	---help---
+	  Include support for machine check handling on old Pentium 5 or WinChip
+	  systems. These typically need to be enabled explicitely on the command
+	  line.
+
 config X86_MCE_THRESHOLD
 	depends on X86_MCE_AMD || X86_MCE_INTEL
 	bool
 	default y
 
+config X86_MCE_INJECT
+	depends on X86_NEW_MCE
+	tristate "Machine check injector support"
+	---help---
+	  Provide support for injecting machine checks for testing purposes.
+	  If you don't know what a machine check is and you don't do kernel
+	  QA it is safe to say n.
+
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_32 && X86_MCE
+	depends on X86_OLD_MCE
 	---help---
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
@@ -812,11 +858,15 @@ config X86_MCE_NONFATAL
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
+	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
 	---help---
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
 
+config X86_THERMAL_VECTOR
+	def_bool y
+	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
 	default y
@@ -1453,9 +1503,7 @@ config KEXEC_JUMP
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
-	default "0x1000000" if X86_NUMAQ
-	default "0x200000" if X86_64
-	default "0x100000"
+	default "0x1000000"
 	---help---
 	  This gives the physical address where the kernel is loaded.
 
@@ -1474,15 +1522,15 @@ config PHYSICAL_START
 	  to be specifically compiled to run from a specific memory area
 	  (normally a reserved region) and this option comes handy.
 
-	  So if you are using bzImage for capturing the crash dump, leave
-	  the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
-	  Otherwise if you plan to use vmlinux for capturing the crash dump
-	  change this value to start of the reserved region (Typically 16MB
-	  0x1000000). In other words, it can be set based on the "X" value as
-	  specified in the "crashkernel=YM@XM" command line boot parameter
-	  passed to the panic-ed kernel. Typically this parameter is set as
-	  crashkernel=64M@16M. Please take a look at
-	  Documentation/kdump/kdump.txt for more details about crash dumps.
+	  So if you are using bzImage for capturing the crash dump,
+	  leave the value here unchanged to 0x1000000 and set
+	  CONFIG_RELOCATABLE=y.  Otherwise if you plan to use vmlinux
+	  for capturing the crash dump change this value to start of
+	  the reserved region.  In other words, it can be set based on
+	  the "X" value as specified in the "crashkernel=YM@XM"
+	  command line boot parameter passed to the panic-ed
+	  kernel. Please take a look at Documentation/kdump/kdump.txt
+	  for more details about crash dumps.
 
 	  Usage of bzImage for capturing the crash dump is recommended as
 	  one does not have to build two kernels. Same kernel can be used
@@ -1495,8 +1543,8 @@ config PHYSICAL_START
 	  Don't change this unless you know what you are doing.
 
 config RELOCATABLE
-	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Build a relocatable kernel"
+	default y
 	---help---
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -1511,12 +1559,16 @@ config RELOCATABLE
 	  it has been loaded at and the compile time physical address
 	  (CONFIG_PHYSICAL_START) is ignored.
 
+# Relocation on x86-32 needs some additional build support
+config X86_NEED_RELOCS
+	def_bool y
+	depends on X86_32 && RELOCATABLE
+
 config PHYSICAL_ALIGN
 	hex
 	prompt "Alignment value to which kernel should be aligned" if X86_32
-	default "0x100000" if X86_32
-	default "0x200000" if X86_64
-	range 0x2000 0x400000
+	default "0x1000000"
+	range 0x2000 0x1000000
 	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index d8359e73317..d105f29bb6b 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -159,14 +159,30 @@ config IOMMU_DEBUG
 	  options. See Documentation/x86_64/boot-options.txt for more
 	  details.
 
+config IOMMU_STRESS
+	bool "Enable IOMMU stress-test mode"
+	---help---
+	  This option disables various optimizations in IOMMU related
+	  code to do real stress testing of the IOMMU code. This option
+	  will cause a performance drop and should only be enabled for
+	  testing.
+
 config IOMMU_LEAK
 	bool "IOMMU leak tracing"
-	depends on DEBUG_KERNEL
-	depends on IOMMU_DEBUG
+	depends on IOMMU_DEBUG && DMA_API_DEBUG
 	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
+config X86_DS_SELFTEST
+    bool "DS selftest"
+    default y
+    depends on DEBUG_KERNEL
+    depends on X86_DS
+	---help---
+	  Perform Debug Store selftests at boot time.
+	  If in doubt, say "N".
+
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 8c86b72afdc..edbd0ca6206 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -7,8 +7,6 @@ else
         KBUILD_DEFCONFIG := $(ARCH)_defconfig
 endif
 
-core-$(CONFIG_KVM) += arch/x86/kvm/
-
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
 # e.g.: obj-y += foo_$(BITS).o
@@ -118,21 +116,8 @@ head-y += arch/x86/kernel/init_task.o
 
 libs-y  += arch/x86/lib/
 
-# Sub architecture files that needs linking first
-core-y += $(fcore-y)
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-core-y += arch/x86/kernel/
-core-y += arch/x86/mm/
-
-core-y += arch/x86/crypto/
-core-y += arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+# See arch/x86/Kbuild for content of core part of the kernel
+core-y += arch/x86/
 
 # drivers-y are linked after core-y
 drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore
index 172cf8a98bd..851fe936d24 100644
--- a/arch/x86/boot/.gitignore
+++ b/arch/x86/boot/.gitignore
@@ -3,6 +3,8 @@ bzImage
 cpustr.h
 mkcpustr
 offsets.h
+voffset.h
+zoffset.h
 setup
 setup.bin
 setup.elf
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 6633b6e7505..8d16ada2504 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -26,9 +26,10 @@ targets		:= vmlinux.bin setup.bin setup.elf bzImage
 targets		+= fdimage fdimage144 fdimage288 image.iso mtools.conf
 subdir-		:= compressed
 
-setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y		+= printf.o string.o tty.o video.o video-mode.o version.o
+setup-y		+= printf.o regs.o string.o tty.o video.o video-mode.o
+setup-y		+= version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
 
 # The link order of the video-*.o modules can matter.  In particular,
@@ -86,19 +87,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 
 SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
 
-sed-offsets := -e 's/^00*/0/' \
-        -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
 
-quiet_cmd_offsets = OFFSETS $@
-      cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+      cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
 
-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+	$(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+      cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,zoffset)
 
-targets += offsets.h
 
 AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
 
 LDFLAGS_setup.elf	:= -T
 $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index 7c19ce8c244..64a31a6d751 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -2,7 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
- *   Copyright 2009 Intel Corporation
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -90,8 +90,11 @@ static int a20_test_long(void)
 
 static void enable_a20_bios(void)
 {
-	asm volatile("pushfl; int $0x15; popfl"
-		     : : "a" ((u16)0x2401));
+	struct biosregs ireg;
+
+	initregs(&ireg);
+	ireg.ax = 0x2401;
+	intcall(0x15, &ireg, NULL);
 }
 
 static void enable_a20_kbc(void)
diff --git a/arch/x86/boot/apm.c b/arch/x86/boot/apm.c
index 7aa6033001f..ee274834ea8 100644
--- a/arch/x86/boot/apm.c
+++ b/arch/x86/boot/apm.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   Original APM BIOS checking by Stephen Rothwell, May 1994
  *   (sfr@canb.auug.org.au)
@@ -19,75 +20,56 @@
 
 int query_apm_bios(void)
 {
-	u16 ax, bx, cx, dx, di;
-	u32 ebx, esi;
-	u8 err;
+	struct biosregs ireg, oreg;
 
 	/* APM BIOS installation check */
-	ax = 0x5300;
-	bx = cx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
-		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
-		     : : "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x53;
+	intcall(0x15, &ireg, &oreg);
 
-	if (err)
+	if (oreg.flags & X86_EFLAGS_CF)
 		return -1;		/* No APM BIOS */
 
-	if (bx != 0x504d)	/* "PM" signature */
+	if (oreg.bx != 0x504d)		/* "PM" signature */
 		return -1;
 
-	if (!(cx & 0x02))		/* 32 bits supported? */
+	if (!(oreg.cx & 0x02))		/* 32 bits supported? */
 		return -1;
 
 	/* Disconnect first, just in case */
-	ax = 0x5304;
-	bx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
-		     : "+a" (ax), "+b" (bx)
-		     : : "ecx", "edx", "esi", "edi");
-
-	/* Paranoia */
-	ebx = esi = 0;
-	cx = dx = di = 0;
+	ireg.al = 0x04;
+	intcall(0x15, &ireg, NULL);
 
 	/* 32-bit connect */
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6"
-		     : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx),
-		       "+S" (esi), "+D" (di), "=m" (err)
-		     : "a" (0x5303));
-
-	boot_params.apm_bios_info.cseg = ax;
-	boot_params.apm_bios_info.offset = ebx;
-	boot_params.apm_bios_info.cseg_16 = cx;
-	boot_params.apm_bios_info.dseg = dx;
-	boot_params.apm_bios_info.cseg_len = (u16)esi;
-	boot_params.apm_bios_info.cseg_16_len = esi >> 16;
-	boot_params.apm_bios_info.dseg_len = di;
-
-	if (err)
+	ireg.al = 0x03;
+	intcall(0x15, &ireg, &oreg);
+
+	boot_params.apm_bios_info.cseg        = oreg.ax;
+	boot_params.apm_bios_info.offset      = oreg.ebx;
+	boot_params.apm_bios_info.cseg_16     = oreg.cx;
+	boot_params.apm_bios_info.dseg        = oreg.dx;
+	boot_params.apm_bios_info.cseg_len    = oreg.si;
+	boot_params.apm_bios_info.cseg_16_len = oreg.hsi;
+	boot_params.apm_bios_info.dseg_len    = oreg.di;
+
+	if (oreg.flags & X86_EFLAGS_CF)
 		return -1;
 
 	/* Redo the installation check as the 32-bit connect;
 	   some BIOSes return different flags this way... */
 
-	ax = 0x5300;
-	bx = cx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
-		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
-		     : : "esi", "edi");
+	ireg.al = 0x00;
+	intcall(0x15, &ireg, &oreg);
 
-	if (err || bx != 0x504d) {
+	if ((oreg.eflags & X86_EFLAGS_CF) || oreg.bx != 0x504d) {
 		/* Failure with 32-bit connect, try to disconect and ignore */
-		ax = 0x5304;
-		bx = 0;
-		asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
-			     : "+a" (ax), "+b" (bx)
-			     : : "ecx", "edx", "esi", "edi");
+		ireg.al = 0x04;
+		intcall(0x15, &ireg, NULL);
 		return -1;
 	}
 
-	boot_params.apm_bios_info.version = ax;
-	boot_params.apm_bios_info.flags = cx;
+	boot_params.apm_bios_info.version = oreg.ax;
+	boot_params.apm_bios_info.flags   = oreg.cx;
 	return 0;
 }
 
diff --git a/arch/x86/boot/bioscall.S b/arch/x86/boot/bioscall.S
new file mode 100644
index 00000000000..507793739ea
--- /dev/null
+++ b/arch/x86/boot/bioscall.S
@@ -0,0 +1,82 @@
+/* -----------------------------------------------------------------------
+ *
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * "Glove box" for BIOS calls.  Avoids the constant problems with BIOSes
+ * touching registers they shouldn't be.
+ */
+
+	.code16
+	.text
+	.globl	intcall
+	.type	intcall, @function
+intcall:
+	/* Self-modify the INT instruction.  Ugly, but works. */
+	cmpb	%al, 3f
+	je	1f
+	movb	%al, 3f
+	jmp	1f		/* Synchronize pipeline */
+1:
+	/* Save state */
+	pushfl
+	pushw	%fs
+	pushw	%gs
+	pushal
+
+	/* Copy input state to stack frame */
+	subw	$44, %sp
+	movw	%dx, %si
+	movw	%sp, %di
+	movw	$11, %cx
+	rep; movsd
+
+	/* Pop full state from the stack */
+	popal
+	popw	%gs
+	popw	%fs
+	popw	%es
+	popw	%ds
+	popfl
+
+	/* Actual INT */
+	.byte	0xcd		/* INT opcode */
+3:	.byte	0
+
+	/* Push full state to the stack */
+	pushfl
+	pushw	%ds
+	pushw	%es
+	pushw	%fs
+	pushw	%gs
+	pushal
+
+	/* Re-establish C environment invariants */
+	cld
+	movzwl	%sp, %esp
+	movw	%cs, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+
+	/* Copy output state from stack frame */
+	movw	68(%esp), %di	/* Original %cx == 3rd argument */
+	andw	%di, %di
+	jz	4f
+	movw	%sp, %si
+	movw	$11, %cx
+	rep; movsd
+4:	addw	$44, %sp
+
+	/* Restore state and return */
+	popal
+	popw	%gs
+	popw	%fs
+	popfl
+	retl
+	.size	intcall, .-intcall
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 7b2692e897e..98239d2658f 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -26,6 +27,7 @@
 #include <asm/setup.h>
 #include "bitops.h"
 #include <asm/cpufeature.h>
+#include <asm/processor-flags.h>
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
@@ -241,6 +243,49 @@ int enable_a20(void);
 /* apm.c */
 int query_apm_bios(void);
 
+/* bioscall.c */
+struct biosregs {
+	union {
+		struct {
+			u32 edi;
+			u32 esi;
+			u32 ebp;
+			u32 _esp;
+			u32 ebx;
+			u32 edx;
+			u32 ecx;
+			u32 eax;
+			u32 _fsgs;
+			u32 _dses;
+			u32 eflags;
+		};
+		struct {
+			u16 di, hdi;
+			u16 si, hsi;
+			u16 bp, hbp;
+			u16 _sp, _hsp;
+			u16 bx, hbx;
+			u16 dx, hdx;
+			u16 cx, hcx;
+			u16 ax, hax;
+			u16 gs, fs;
+			u16 es, ds;
+			u16 flags, hflags;
+		};
+		struct {
+			u8 dil, dih, edi2, edi3;
+			u8 sil, sih, esi2, esi3;
+			u8 bpl, bph, ebp2, ebp3;
+			u8 _spl, _sph, _esp2, _esp3;
+			u8 bl, bh, ebx2, ebx3;
+			u8 dl, dh, edx2, edx3;
+			u8 cl, ch, ecx2, ecx3;
+			u8 al, ah, eax2, eax3;
+		};
+	};
+};
+void intcall(u8 int_no, const struct biosregs *ireg, struct biosregs *oreg);
+
 /* cmdline.c */
 int cmdline_find_option(const char *option, char *buffer, int bufsize);
 int cmdline_find_option_bool(const char *option);
@@ -279,6 +324,9 @@ int sprintf(char *buf, const char *fmt, ...);
 int vsprintf(char *buf, const char *fmt, va_list args);
 int printf(const char *fmt, ...);
 
+/* regs.c */
+void initregs(struct biosregs *regs);
+
 /* string.c */
 int strcmp(const char *str1, const char *str2);
 size_t strnlen(const char *s, size_t maxlen);
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 63eff3b04d0..4a46fab7162 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -1,3 +1,6 @@
 relocs
 vmlinux.bin.all
 vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 65551c9f857..49c8a4c37d7 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -19,7 +19,9 @@ KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
 LDFLAGS := -m elf_$(UTS_MACHINE)
 LDFLAGS_vmlinux := -T
 
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y	:= mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
@@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 
 
 targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
 
 quiet_cmd_relocs = RELOCS  $@
       cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
 	$(call if_changed,relocs)
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD   $@
-      cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
-	$(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
 
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
 
-else
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+      cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
 
-suffix_$(CONFIG_KERNEL_GZIP)  = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA)  = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
-	$(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+	$(call if_changed,mkpiggy)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 3a8a866fb2e..75e4f001e70 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -12,16 +12,16 @@
  * the page directory. [According to comments etc elsewhere on a compressed
  * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
  *
- * Page 0 is deliberately kept safe, since System Management Mode code in 
+ * Page 0 is deliberately kept safe, since System Management Mode code in
  * laptops may need to access the BIOS data stored there.  This is also
- * useful for future device drivers that either access the BIOS via VM86 
+ * useful for future device drivers that either access the BIOS via VM86
  * mode.
  */
 
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.text
+	.text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -29,161 +29,151 @@
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head","ax",@progbits
+	.section ".text.head","ax",@progbits
 ENTRY(startup_32)
 	cld
-	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-	 * us to not reload segments */
-	testb $(1<<6), BP_loadflags(%esi)
-	jnz 1f
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
+	testb	$(1<<6), BP_loadflags(%esi)
+	jnz	1f
 
 	cli
-	movl $(__BOOT_DS),%eax
-	movl %eax,%ds
-	movl %eax,%es
-	movl %eax,%fs
-	movl %eax,%gs
-	movl %eax,%ss
+	movl	$__BOOT_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %fs
+	movl	%eax, %gs
+	movl	%eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-	leal (0x1e4+4)(%esi), %esp
-	call 1f
-1:	popl %ebp
-	subl $1b, %ebp
+	leal	(BP_scratch+4)(%esi), %esp
+	call	1f
+1:	popl	%ebp
+	subl	$1b, %ebp
 
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
-	movl 	%ebp, %ebx
-	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
-	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+	movl	%ebp, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl    %eax, %ebx
+	notl	%eax
+	andl    %eax, %ebx
 #else
-	movl $LOAD_PHYSICAL_ADDR, %ebx
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	subl input_len(%ebp), %ebx
-	movl output_len(%ebp), %eax
-	addl %eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl $12, %eax
-	addl %eax, %ebx
-	/* Add 32K + 18 bytes of extra slack */
-	addl $(32768 + 18), %ebx
-	/* Align on a 4K boundary */
-	addl $4095, %ebx
-	andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
+
+	/* Set up the stack */
+	leal	boot_stack_end(%ebx), %esp
+
+	/* Zero EFLAGS */
+	pushl	$0
+	popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	pushl %esi
-	leal _end(%ebp), %esi
-	leal _end(%ebx), %edi
-	movl $(_end - startup_32), %ecx
+	pushl	%esi
+	leal	(_bss-4)(%ebp), %esi
+	leal	(_bss-4)(%ebx), %edi
+	movl	$(_bss - startup_32), %ecx
+	shrl	$2, %ecx
 	std
-	rep
-	movsb
+	rep	movsl
 	cld
-	popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
-	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
-	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
-	movl	$LOAD_PHYSICAL_ADDR, %ebp
-#endif
+	popl	%esi
 
 /*
  * Jump to the relocated address.
  */
-	leal relocated(%ebx), %eax
-	jmp *%eax
+	leal	relocated(%ebx), %eax
+	jmp	*%eax
 ENDPROC(startup_32)
 
-.section ".text"
+	.text
 relocated:
 
 /*
- * Clear BSS
- */
-	xorl %eax,%eax
-	leal _edata(%ebx),%edi
-	leal _end(%ebx), %ecx
-	subl %edi,%ecx
-	cld
-	rep
-	stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
  */
-	leal boot_stack_end(%ebx), %esp
+	xorl	%eax, %eax
+	leal	_bss(%ebx), %edi
+	leal	_ebss(%ebx), %ecx
+	subl	%edi, %ecx
+	shrl	$2, %ecx
+	rep	stosl
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	movl output_len(%ebx), %eax
-	pushl %eax
-			# push arguments for decompress_kernel:
-	pushl %ebp	# output address
-	movl input_len(%ebx), %eax
-	pushl %eax	# input_len
-	leal input_data(%ebx), %eax
-	pushl %eax	# input_data
-	leal boot_heap(%ebx), %eax
-	pushl %eax	# heap area
-	pushl %esi	# real mode pointer
-	call decompress_kernel
-	addl $20, %esp
-	popl %ecx
+	leal	z_extract_offset_negative(%ebx), %ebp
+				/* push arguments for decompress_kernel: */
+	pushl	%ebp		/* output address */
+	pushl	$z_input_len	/* input_len */
+	leal	input_data(%ebx), %eax
+	pushl	%eax		/* input_data */
+	leal	boot_heap(%ebx), %eax
+	pushl	%eax		/* heap area */
+	pushl	%esi		/* real mode pointer */
+	call	decompress_kernel
+	addl	$20, %esp
 
 #if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
  */
-	movl %ebp, %edi
-	addl %ecx, %edi
+	leal	z_output_len(%ebp), %edi
 
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
  * and where it was actually loaded.
  */
-	movl %ebp, %ebx
-	subl $LOAD_PHYSICAL_ADDR, %ebx
-	jz   2f		/* Nothing to be done if loaded at compiled addr. */
+	movl	%ebp, %ebx
+	subl	$LOAD_PHYSICAL_ADDR, %ebx
+	jz	2f	/* Nothing to be done if loaded at compiled addr. */
 /*
  * Process relocations.
  */
 
-1:	subl $4, %edi
-	movl 0(%edi), %ecx
-	testl %ecx, %ecx
-	jz 2f
-	addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
-	jmp 1b
+1:	subl	$4, %edi
+	movl	(%edi), %ecx
+	testl	%ecx, %ecx
+	jz	2f
+	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
+	jmp	1b
 2:
 #endif
 
 /*
  * Jump to the decompressed kernel.
  */
-	xorl %ebx,%ebx
-	jmp *%ebp
+	xorl	%ebx, %ebx
+	jmp	*%ebp
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
 boot_heap:
 	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index ed4a8294800..f62c284db9e 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -21,8 +21,8 @@
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.code32
-.text
+	.code32
+	.text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -33,12 +33,14 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head"
+	.section ".text.head"
 	.code32
 ENTRY(startup_32)
 	cld
-	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-	 * us to not reload segments */
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
 	testb $(1<<6), BP_loadflags(%esi)
 	jnz 1f
 
@@ -49,14 +51,15 @@ ENTRY(startup_32)
 	movl	%eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-	leal	(0x1e4+4)(%esi), %esp
+	leal	(BP_scratch+4)(%esi), %esp
 	call	1f
 1:	popl	%ebp
 	subl	$1b, %ebp
@@ -70,32 +73,28 @@ ENTRY(startup_32)
 	testl	%eax, %eax
 	jnz	no_longmode
 
-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
  * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
 	movl	%ebp, %ebx
-	addl	$(PMD_PAGE_SIZE -1), %ebx
-	andl	$PMD_PAGE_MASK, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl	%eax, %ebx
+	notl	%eax
+	andl	%eax, %ebx
 #else
-	movl	$CONFIG_PHYSICAL_START, %ebx
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	subl	input_len(%ebp), %ebx
-	movl	output_len(%ebp), %eax
-	addl	%eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl	$12, %eax
-	addl	%eax, %ebx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addl	$(32768 + 18 + 4095), %ebx
-	andl	$~4095, %ebx
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
 
 /*
  * Prepare for entering 64 bit mode
@@ -114,7 +113,7 @@ ENTRY(startup_32)
  /*
   * Build early 4G boot pagetable
   */
-	/* Initialize Page tables to 0*/
+	/* Initialize Page tables to 0 */
 	leal	pgtable(%ebx), %edi
 	xorl	%eax, %eax
 	movl	$((4096*6)/4), %ecx
@@ -155,7 +154,8 @@ ENTRY(startup_32)
 	btsl	$_EFER_LME, %eax
 	wrmsr
 
-	/* Setup for the jump to 64bit mode
+	/*
+	 * Setup for the jump to 64bit mode
 	 *
 	 * When the jump is performend we will be in long mode but
 	 * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
@@ -184,7 +184,8 @@ no_longmode:
 
 #include "../../kernel/verify_cpu_64.S"
 
-	/* Be careful here startup_64 needs to be at a predictable
+	/*
+	 * Be careful here startup_64 needs to be at a predictable
 	 * address so I can export it in an ELF header.  Bootloaders
 	 * should look at the ELF header to find this address, as
 	 * it may change in the future.
@@ -192,7 +193,8 @@ no_longmode:
 	.code64
 	.org 0x200
 ENTRY(startup_64)
-	/* We come here either from startup_32 or directly from a
+	/*
+	 * We come here either from startup_32 or directly from a
 	 * 64bit bootloader.  If we come here from a bootloader we depend on
 	 * an identity mapped page table being provied that maps our
 	 * entire text+data+bss and hopefully all of memory.
@@ -209,50 +211,54 @@ ENTRY(startup_64)
 	movl    $0x20, %eax
 	ltr	%ax
 
-	/* Compute the decompressed kernel start address.  It is where
+	/*
+	 * Compute the decompressed kernel start address.  It is where
 	 * we were loaded at aligned to a 2M boundary. %rbp contains the
 	 * decompressed kernel start address.
 	 *
 	 * If it is a relocatable kernel then decompress and run the kernel
 	 * from load address aligned to 2MB addr, otherwise decompress and
-	 * run the kernel from CONFIG_PHYSICAL_START
+	 * run the kernel from LOAD_PHYSICAL_ADDR
+	 *
+	 * We cannot rely on the calculation done in 32-bit mode, since we
+	 * may have been invoked via the 64-bit entry point.
 	 */
 
 	/* Start with the delta to where the kernel will run at. */
 #ifdef CONFIG_RELOCATABLE
 	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
-	addq	$(PMD_PAGE_SIZE - 1), %rbp
-	andq	$PMD_PAGE_MASK, %rbp
-	movq	%rbp, %rbx
+	movl	BP_kernel_alignment(%rsi), %eax
+	decl	%eax
+	addq	%rax, %rbp
+	notq	%rax
+	andq	%rax, %rbp
 #else
-	movq	$CONFIG_PHYSICAL_START, %rbp
-	movq	%rbp, %rbx
+	movq	$LOAD_PHYSICAL_ADDR, %rbp
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	movl	input_len(%rip), %eax
-	subq	%rax, %rbx
-	movl	output_len(%rip), %eax
-	addq	%rax, %rbx
-	/* Add 8 bytes for every 32K input block */
-	shrq	$12, %rax
-	addq	%rax, %rbx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addq	$(32768 + 18 + 4095), %rbx
-	andq	$~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+	/* Target address to relocate to for decompression */
+	leaq	z_extract_offset(%rbp), %rbx
+
+	/* Set up the stack */
+	leaq	boot_stack_end(%rbx), %rsp
+
+	/* Zero EFLAGS */
+	pushq	$0
+	popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	leaq	_end_before_pgt(%rip), %r8
-	leaq	_end_before_pgt(%rbx), %r9
-	movq	$_end_before_pgt /* - $startup_32 */, %rcx
-1:	subq	$8, %r8
-	subq	$8, %r9
-	movq	0(%r8), %rax
-	movq	%rax, 0(%r9)
-	subq	$8, %rcx
-	jnz	1b
+	pushq	%rsi
+	leaq	(_bss-8)(%rip), %rsi
+	leaq	(_bss-8)(%rbx), %rdi
+	movq	$_bss /* - $startup_32 */, %rcx
+	shrq	$3, %rcx
+	std
+	rep	movsq
+	cld
+	popq	%rsi
 
 /*
  * Jump to the relocated address.
@@ -260,37 +266,28 @@ ENTRY(startup_64)
 	leaq	relocated(%rbx), %rax
 	jmp	*%rax
 
-.section ".text"
+	.text
 relocated:
 
 /*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
  */
-	xorq	%rax, %rax
-	leaq    _edata(%rbx), %rdi
-	leaq    _end_before_pgt(%rbx), %rcx
+	xorl	%eax, %eax
+	leaq    _bss(%rip), %rdi
+	leaq    _ebss(%rip), %rcx
 	subq	%rdi, %rcx
-	cld
-	rep
-	stosb
-
-	/* Setup the stack */
-	leaq	boot_stack_end(%rip), %rsp
-
-	/* zero EFLAGS after setting rsp */
-	pushq	$0
-	popfq
+	shrq	$3, %rcx
+	rep	stosq
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	pushq	%rsi			# Save the real mode argument
-	movq	%rsi, %rdi		# real mode address
-	leaq	boot_heap(%rip), %rsi	# malloc area for uncompression
-	leaq	input_data(%rip), %rdx  # input_data
-	movl	input_len(%rip), %eax
-	movq	%rax, %rcx		# input_len
-	movq	%rbp, %r8		# output
+	pushq	%rsi			/* Save the real mode argument */
+	movq	%rsi, %rdi		/* real mode address */
+	leaq	boot_heap(%rip), %rsi	/* malloc area for uncompression */
+	leaq	input_data(%rip), %rdx  /* input_data */
+	movl	$z_input_len, %ecx	/* input_len */
+	movq	%rbp, %r8		/* output target address */
 	call	decompress_kernel
 	popq	%rsi
 
@@ -311,11 +308,21 @@ gdt:
 	.quad   0x0000000000000000	/* TS continued */
 gdt_end:
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
 boot_heap:
 	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:
 	.fill BOOT_STACK_SIZE, 1, 0
 boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+	.section ".pgtable","a",@nobits
+	.balign 4096
+pgtable:
+	.fill 6*4096, 1, 0
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index e45be73684f..842b2a36174 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 
+	if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+		error("Destination address inappropriately aligned");
 #ifdef CONFIG_X86_64
-	if ((unsigned long)output & (__KERNEL_ALIGN - 1))
-		error("Destination address not 2M aligned");
-	if ((unsigned long)output >= 0xffffffffffUL)
+	if (heap > 0x3fffffffffffUL)
 		error("Destination address too large");
 #else
-	if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
-		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
 	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
+#endif
 #ifndef CONFIG_RELOCATABLE
-	if ((u32)output != LOAD_PHYSICAL_ADDR)
+	if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
 		error("Wrong destination address");
 #endif
-#endif
 
 	if (!quiet)
 		putstr("\nDecompressing Linux... ");
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
new file mode 100644
index 00000000000..bcbd36c4143
--- /dev/null
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -0,0 +1,97 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *  Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License version
+ *  2 as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ *
+ *  H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+	const uint8_t *cp = p;
+
+	return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+		((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+	uint32_t olen;
+	long ilen;
+	unsigned long offs;
+	FILE *f;
+
+	if (argc < 2) {
+		fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+		return 1;
+	}
+
+	/* Get the information for the compressed kernel image first */
+
+	f = fopen(argv[1], "r");
+	if (!f) {
+		perror(argv[1]);
+		return 1;
+	}
+
+
+	if (fseek(f, -4L, SEEK_END)) {
+		perror(argv[1]);
+	}
+	fread(&olen, sizeof olen, 1, f);
+	ilen = ftell(f);
+	olen = getle32(&olen);
+	fclose(f);
+
+	/*
+	 * Now we have the input (compressed) and output (uncompressed)
+	 * sizes, compute the necessary decompression offset...
+	 */
+
+	offs = (olen > ilen) ? olen - ilen : 0;
+	offs += olen >> 12;	/* Add 8 bytes for each 32K block */
+	offs += 32*1024 + 18;	/* Add 32K + 18 bytes slack */
+	offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+	printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+	printf(".globl z_input_len\n");
+	printf("z_input_len = %lu\n", ilen);
+	printf(".globl z_output_len\n");
+	printf("z_output_len = %lu\n", (unsigned long)olen);
+	printf(".globl z_extract_offset\n");
+	printf("z_extract_offset = 0x%lx\n", offs);
+	/* z_extract_offset_negative allows simplification of head_32.S */
+	printf(".globl z_extract_offset_negative\n");
+	printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+	printf(".globl input_data, input_data_end\n");
+	printf("input_data:\n");
+	printf(".incbin \"%s\"\n", argv[1]);
+	printf("input_data_end:\n");
+
+	return 0;
+}
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index 857e492c571..bbeb0c3fbd9 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -504,8 +504,11 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
 			if (sym->st_shndx == SHN_ABS) {
 				continue;
 			}
-			if (r_type == R_386_PC32) {
-				/* PC relative relocations don't need to be adjusted */
+			if (r_type == R_386_NONE || r_type == R_386_PC32) {
+				/*
+				 * NONE can be ignored and and PC relative
+				 * relocations don't need to be adjusted.
+				 */
 			}
 			else if (r_type == R_386_32) {
 				/* Visit relocations that need to be adjusted */
diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S
index bef1ac891bc..cc353e1b3ff 100644
--- a/arch/x86/boot/compressed/vmlinux_64.lds
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,6 +1,17 @@
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
 OUTPUT_ARCH(i386:x86-64)
 ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
 SECTIONS
 {
 	/* Be careful parts of head_64.S assume startup_32 is at
@@ -33,16 +44,22 @@ SECTIONS
 		*(.data.*)
 		_edata = . ;
 	}
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
 	.bss : {
 		_bss = . ;
 		*(.bss)
 		*(.bss.*)
 		*(COMMON)
-		. = ALIGN(8);
-		_end_before_pgt = . ;
-		. = ALIGN(4096);
-		pgtable = . ;
-		. = . + 4096 * 6;
+		. = ALIGN(8);	/* For convenience during zeroing */
 		_ebss = .;
 	}
+#ifdef CONFIG_X86_64
+       . = ALIGN(PAGE_SIZE);
+       .pgtable : {
+		_pgtable = . ;
+		*(.pgtable)
+		_epgtable = . ;
+	}
+#endif
+	_end = .;
 }
diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr
deleted file mode 100644
index f02382ae5c4..00000000000
--- a/arch/x86/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
-  .rodata.compressed : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .;
-	*(.data)
-	output_len = . - 4;
-	input_data_end = .;
-	}
-}
diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds
deleted file mode 100644
index bb3c48379c4..00000000000
--- a/arch/x86/boot/compressed/vmlinux_32.lds
+++ /dev/null
@@ -1,43 +0,0 @@
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
-	/* Be careful parts of head_32.S assume startup_32 is at
-	 * address 0.
-	 */
-	. = 0;
-	.text.head : {
-		_head = . ;
-		*(.text.head)
-		_ehead = . ;
-	}
-	.rodata.compressed : {
-		*(.rodata.compressed)
-	}
-	.text :	{
-		_text = .; 	/* Text */
-		*(.text)
-		*(.text.*)
-		_etext = . ;
-	}
-	.rodata : {
-		_rodata = . ;
-		*(.rodata)	 /* read-only data */
-		*(.rodata.*)
-		_erodata = . ;
-	}
-	.data :	{
-		_data = . ;
-		*(.data)
-		*(.data.*)
-		_edata = . ;
-	}
-	.bss : {
-		_bss = . ;
-		*(.bss)
-		*(.bss.*)
-		*(COMMON)
-		_end = . ;
-	}
-}
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index 1aae8f3e5ca..c501a5b466f 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -22,17 +23,17 @@
  */
 static int read_mbr(u8 devno, void *buf)
 {
-	u16 ax, bx, cx, dx;
+	struct biosregs ireg, oreg;
 
-	ax = 0x0201;		/* Legacy Read, one sector */
-	cx = 0x0001;		/* Sector 0-0-1 */
-	dx = devno;
-	bx = (size_t)buf;
-	asm volatile("pushfl; stc; int $0x13; setc %%al; popfl"
-		     : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
-		     : : "esi", "edi", "memory");
+	initregs(&ireg);
+	ireg.ax = 0x0201;		/* Legacy Read, one sector */
+	ireg.cx = 0x0001;		/* Sector 0-0-1 */
+	ireg.dl = devno;
+	ireg.bx = (size_t)buf;
 
-	return -(u8)ax;		/* 0 or -1 */
+	intcall(0x13, &ireg, &oreg);
+
+	return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */
 }
 
 static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
@@ -72,56 +73,46 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
 
 static int get_edd_info(u8 devno, struct edd_info *ei)
 {
-	u16 ax, bx, cx, dx, di;
+	struct biosregs ireg, oreg;
 
 	memset(ei, 0, sizeof *ei);
 
 	/* Check Extensions Present */
 
-	ax = 0x4100;
-	bx = EDDMAGIC1;
-	dx = devno;
-	asm("pushfl; stc; int $0x13; setc %%al; popfl"
-	    : "+a" (ax), "+b" (bx), "=c" (cx), "+d" (dx)
-	    : : "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x41;
+	ireg.bx = EDDMAGIC1;
+	ireg.dl = devno;
+	intcall(0x13, &ireg, &oreg);
 
-	if ((u8)ax)
+	if (oreg.eflags & X86_EFLAGS_CF)
 		return -1;	/* No extended information */
 
-	if (bx != EDDMAGIC2)
+	if (oreg.bx != EDDMAGIC2)
 		return -1;
 
 	ei->device  = devno;
-	ei->version = ax >> 8;	/* EDD version number */
-	ei->interface_support = cx; /* EDD functionality subsets */
+	ei->version = oreg.ah;		 /* EDD version number */
+	ei->interface_support = oreg.cx; /* EDD functionality subsets */
 
 	/* Extended Get Device Parameters */
 
 	ei->params.length = sizeof(ei->params);
-	ax = 0x4800;
-	dx = devno;
-	asm("pushfl; int $0x13; popfl"
-	    : "+a" (ax), "+d" (dx), "=m" (ei->params)
-	    : "S" (&ei->params)
-	    : "ebx", "ecx", "edi");
+	ireg.ah = 0x48;
+	ireg.si = (size_t)&ei->params;
+	intcall(0x13, &ireg, &oreg);
 
 	/* Get legacy CHS parameters */
 
 	/* Ralf Brown recommends setting ES:DI to 0:0 */
-	ax = 0x0800;
-	dx = devno;
-	di = 0;
-	asm("pushw %%es; "
-	    "movw %%di,%%es; "
-	    "pushfl; stc; int $0x13; setc %%al; popfl; "
-	    "popw %%es"
-	    : "+a" (ax), "=b" (bx), "=c" (cx), "+d" (dx), "+D" (di)
-	    : : "esi");
-
-	if ((u8)ax == 0) {
-		ei->legacy_max_cylinder = (cx >> 8) + ((cx & 0xc0) << 2);
-		ei->legacy_max_head = dx >> 8;
-		ei->legacy_sectors_per_track = cx & 0x3f;
+	ireg.ah = 0x08;
+	ireg.es = 0;
+	intcall(0x13, &ireg, &oreg);
+
+	if (!(oreg.eflags & X86_EFLAGS_CF)) {
+		ei->legacy_max_cylinder = oreg.ch + ((oreg.cl & 0xc0) << 2);
+		ei->legacy_max_head = oreg.dh;
+		ei->legacy_sectors_per_track = oreg.cl & 0x3f;
 	}
 
 	return 0;
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 5d84d1c74e4..b31cc54b464 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,7 +22,8 @@
 #include <asm/page_types.h>
 #include <asm/setup.h>
 #include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"
 
 BOOTSEG		= 0x07C0		/* original address of boot-sector */
 SYSSEG		= 0x1000		/* historical load address >> 4 */
@@ -115,7 +116,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0209		# header version number (>= 0x0105)
+		.word	0x020a		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@@ -168,7 +169,11 @@ heap_end_ptr:	.word	_end+STACK_SIZE-512
 					# end of setup code can be used by setup
 					# for local heap purposes.
 
-pad1:		.word	0
+ext_loader_ver:
+		.byte	0		# Extended boot loader version
+ext_loader_type:
+		.byte	0		# Extended boot loader type
+
 cmd_line_ptr:	.long	0		# (Header version 0x0202 or later)
 					# If nonzero, a 32-bit pointer
 					# to the kernel command line.
@@ -200,7 +205,7 @@ relocatable_kernel:    .byte 1
 #else
 relocatable_kernel:    .byte 0
 #endif
-pad2:			.byte 0
+min_alignment:		.byte MIN_KERNEL_ALIGN_LG2	# minimum alignment
 pad3:			.word 0
 
 cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
@@ -212,16 +217,27 @@ hardware_subarch:	.long 0			# subarchitecture, added with 2.07
 
 hardware_subarch_data:	.quad 0
 
-payload_offset:		.long input_data
-payload_length:		.long input_data_end-input_data
+payload_offset:		.long ZO_input_data
+payload_length:		.long ZO_z_input_len
 
 setup_data:		.quad 0			# 64-bit physical pointer to
 						# single linked list of
 						# struct setup_data
 
+pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
+
+#define ZO_INIT_SIZE	(ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE	(VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size:		.long INIT_SIZE		# kernel initialization size
+
 # End of setup header #####################################################
 
-	.section ".inittext", "ax"
+	.section ".entrytext", "ax"
 start_of_setup:
 #ifdef SAFE_RESET_DISK_CONTROLLER
 # Reset the disk controller.
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 58f0415d3ae..140172b895b 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -61,11 +62,10 @@ static void copy_boot_params(void)
  */
 static void keyboard_set_repeat(void)
 {
-	u16 ax = 0x0305;
-	u16 bx = 0;
-	asm volatile("int $0x16"
-		     : "+a" (ax), "+b" (bx)
-		     : : "ecx", "edx", "esi", "edi");
+	struct biosregs ireg;
+	initregs(&ireg);
+	ireg.ax = 0x0305;
+	intcall(0x16, &ireg, NULL);
 }
 
 /*
@@ -73,18 +73,22 @@ static void keyboard_set_repeat(void)
  */
 static void query_ist(void)
 {
+	struct biosregs ireg, oreg;
+
 	/* Some older BIOSes apparently crash on this call, so filter
 	   it from machines too old to have SpeedStep at all. */
 	if (cpu.level < 6)
 		return;
 
-	asm("int $0x15"
-	    : "=a" (boot_params.ist_info.signature),
-	      "=b" (boot_params.ist_info.command),
-	      "=c" (boot_params.ist_info.event),
-	      "=d" (boot_params.ist_info.perf_level)
-	    : "a" (0x0000e980),	 /* IST Support */
-	      "d" (0x47534943)); /* Request value */
+	initregs(&ireg);
+	ireg.ax  = 0xe980;	 /* IST Support */
+	ireg.edx = 0x47534943;	 /* Request value */
+	intcall(0x15, &ireg, &oreg);
+
+	boot_params.ist_info.signature  = oreg.eax;
+	boot_params.ist_info.command    = oreg.ebx;
+	boot_params.ist_info.event      = oreg.ecx;
+	boot_params.ist_info.perf_level = oreg.edx;
 }
 
 /*
@@ -93,13 +97,12 @@ static void query_ist(void)
 static void set_bios_mode(void)
 {
 #ifdef CONFIG_X86_64
-	u32 eax, ebx;
+	struct biosregs ireg;
 
-	eax = 0xec00;
-	ebx = 2;
-	asm volatile("int $0x15"
-		     : "+a" (eax), "+b" (ebx)
-		     : : "ecx", "edx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ax = 0xec00;
+	ireg.bx = 2;
+	intcall(0x15, &ireg, NULL);
 #endif
 }
 
diff --git a/arch/x86/boot/mca.c b/arch/x86/boot/mca.c
index 911eaae5d69..a95a531148e 100644
--- a/arch/x86/boot/mca.c
+++ b/arch/x86/boot/mca.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -16,26 +17,22 @@
 
 int query_mca(void)
 {
-	u8 err;
-	u16 es, bx, len;
-
-	asm("pushw %%es ; "
-	    "int $0x15 ; "
-	    "setc %0 ; "
-	    "movw %%es, %1 ; "
-	    "popw %%es"
-	    : "=acd" (err), "=acdSD" (es), "=b" (bx)
-	    : "a" (0xc000));
-
-	if (err)
+	struct biosregs ireg, oreg;
+	u16 len;
+
+	initregs(&ireg);
+	ireg.ah = 0xc0;
+	intcall(0x15, &ireg, &oreg);
+
+	if (oreg.eflags & X86_EFLAGS_CF)
 		return -1;	/* No MCA present */
 
-	set_fs(es);
-	len = rdfs16(bx);
+	set_fs(oreg.es);
+	len = rdfs16(oreg.bx);
 
 	if (len > sizeof(boot_params.sys_desc_table))
 		len = sizeof(boot_params.sys_desc_table);
 
-	copy_from_fs(&boot_params.sys_desc_table, bx, len);
+	copy_from_fs(&boot_params.sys_desc_table, oreg.bx, len);
 	return 0;
 }
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 5054c2ddd1a..cae3feb1035 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -17,43 +17,41 @@
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
-struct e820_ext_entry {
-	struct e820entry std;
-	u32 ext_flags;
-} __attribute__((packed));
-
 static int detect_memory_e820(void)
 {
 	int count = 0;
-	u32 next = 0;
-	u32 size, id, edi;
-	u8 err;
+	struct biosregs ireg, oreg;
 	struct e820entry *desc = boot_params.e820_map;
-	static struct e820_ext_entry buf; /* static so it is zeroed */
+	static struct e820entry buf; /* static so it is zeroed */
+
+	initregs(&ireg);
+	ireg.ax  = 0xe820;
+	ireg.cx  = sizeof buf;
+	ireg.edx = SMAP;
+	ireg.di  = (size_t)&buf;
 
 	/*
-	 * Set this here so that if the BIOS doesn't change this field
-	 * but still doesn't change %ecx, we're still okay...
+	 * Note: at least one BIOS is known which assumes that the
+	 * buffer pointed to by one e820 call is the same one as
+	 * the previous call, and only changes modified fields.  Therefore,
+	 * we use a temporary buffer and copy the results entry by entry.
+	 *
+	 * This routine deliberately does not try to account for
+	 * ACPI 3+ extended attributes.  This is because there are
+	 * BIOSes in the field which report zero for the valid bit for
+	 * all ranges, and we don't currently make any use of the
+	 * other attribute bits.  Revisit this if we see the extended
+	 * attribute bits deployed in a meaningful way in the future.
 	 */
-	buf.ext_flags = 1;
 
 	do {
-		size = sizeof buf;
-
-		/* Important: %edx and %esi are clobbered by some BIOSes,
-		   so they must be either used for the error output
-		   or explicitly marked clobbered.  Given that, assume there
-		   is something out there clobbering %ebp and %edi, too. */
-		asm("pushl %%ebp; int $0x15; popl %%ebp; setc %0"
-		    : "=d" (err), "+b" (next), "=a" (id), "+c" (size),
-		      "=D" (edi), "+m" (buf)
-		    : "D" (&buf), "d" (SMAP), "a" (0xe820)
-		    : "esi");
+		intcall(0x15, &ireg, &oreg);
+		ireg.ebx = oreg.ebx; /* for next iteration... */
 
 		/* BIOSes which terminate the chain with CF = 1 as opposed
 		   to %ebx = 0 don't always report the SMAP signature on
 		   the final, failing, probe. */
-		if (err)
+		if (oreg.eflags & X86_EFLAGS_CF)
 			break;
 
 		/* Some BIOSes stop returning SMAP in the middle of
@@ -61,66 +59,64 @@ static int detect_memory_e820(void)
 		   screwed up the map at that point, we might have a
 		   partial map, the full map, or complete garbage, so
 		   just return failure. */
-		if (id != SMAP) {
+		if (oreg.eax != SMAP) {
 			count = 0;
 			break;
 		}
 
-		/* ACPI 3.0 added the extended flags support.  If bit 0
-		   in the extended flags is zero, we're supposed to simply
-		   ignore the entry -- a backwards incompatible change! */
-		if (size > 20 && !(buf.ext_flags & 1))
-			continue;
-
-		*desc++ = buf.std;
+		*desc++ = buf;
 		count++;
-	} while (next && count < ARRAY_SIZE(boot_params.e820_map));
+	} while (ireg.ebx && count < ARRAY_SIZE(boot_params.e820_map));
 
 	return boot_params.e820_entries = count;
 }
 
 static int detect_memory_e801(void)
 {
-	u16 ax, bx, cx, dx;
-	u8 err;
+	struct biosregs ireg, oreg;
 
-	bx = cx = dx = 0;
-	ax = 0xe801;
-	asm("stc; int $0x15; setc %0"
-	    : "=m" (err), "+a" (ax), "+b" (bx), "+c" (cx), "+d" (dx));
+	initregs(&ireg);
+	ireg.ax = 0xe801;
+	intcall(0x15, &ireg, &oreg);
 
-	if (err)
+	if (oreg.eflags & X86_EFLAGS_CF)
 		return -1;
 
 	/* Do we really need to do this? */
-	if (cx || dx) {
-		ax = cx;
-		bx = dx;
+	if (oreg.cx || oreg.dx) {
+		oreg.ax = oreg.cx;
+		oreg.bx = oreg.dx;
 	}
 
-	if (ax > 15*1024)
+	if (oreg.ax > 15*1024) {
 		return -1;	/* Bogus! */
-
-	/* This ignores memory above 16MB if we have a memory hole
-	   there.  If someone actually finds a machine with a memory
-	   hole at 16MB and no support for 0E820h they should probably
-	   generate a fake e820 map. */
-	boot_params.alt_mem_k = (ax == 15*1024) ? (dx << 6)+ax : ax;
+	} else if (oreg.ax == 15*1024) {
+		boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax;
+	} else {
+		/*
+		 * This ignores memory above 16MB if we have a memory
+		 * hole there.  If someone actually finds a machine
+		 * with a memory hole at 16MB and no support for
+		 * 0E820h they should probably generate a fake e820
+		 * map.
+		 */
+		boot_params.alt_mem_k = oreg.ax;
+	}
 
 	return 0;
 }
 
 static int detect_memory_88(void)
 {
-	u16 ax;
-	u8 err;
+	struct biosregs ireg, oreg;
 
-	ax = 0x8800;
-	asm("stc; int $0x15; setc %0" : "=bcdm" (err), "+a" (ax));
+	initregs(&ireg);
+	ireg.ah = 0x88;
+	intcall(0x15, &ireg, &oreg);
 
-	boot_params.screen_info.ext_mem_k = ax;
+	boot_params.screen_info.ext_mem_k = oreg.ax;
 
-	return -err;
+	return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */
 }
 
 int detect_memory(void)
diff --git a/arch/x86/boot/regs.c b/arch/x86/boot/regs.c
new file mode 100644
index 00000000000..958019b1cfa
--- /dev/null
+++ b/arch/x86/boot/regs.c
@@ -0,0 +1,29 @@
+/* -----------------------------------------------------------------------
+ *
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Simple helper function for initializing a register set.
+ *
+ * Note that this sets EFLAGS_CF in the input register set; this
+ * makes it easier to catch functions which do nothing but don't
+ * explicitly set CF.
+ */
+
+#include "boot.h"
+
+void initregs(struct biosregs *reg)
+{
+	memset(reg, 0, sizeof *reg);
+	reg->eflags |= X86_EFLAGS_CF;
+	reg->ds = ds();
+	reg->es = ds();
+	reg->fs = fs();
+	reg->gs = gs();
+}
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index bb8dc2de796..0f6ec455a2b 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -15,8 +15,11 @@ SECTIONS
 
 	. = 497;
 	.header		: { *(.header) }
+	.entrytext	: { *(.entrytext) }
 	.inittext	: { *(.inittext) }
 	.initdata	: { *(.initdata) }
+	__end_init = .;
+
 	.text		: { *(.text) }
 	.text32		: { *(.text32) }
 
@@ -52,4 +55,7 @@ SECTIONS
 
 	. = ASSERT(_end <= 0x8000, "Setup too big!");
 	. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
+	/* Necessary for the very-old-loader check to work... */
+	. = ASSERT(__end_init <= 5*512, "init sections too big!");
+
 }
diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c
index 7e8e8b25f5f..01ec69c901c 100644
--- a/arch/x86/boot/tty.c
+++ b/arch/x86/boot/tty.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -22,24 +23,23 @@
 
 void __attribute__((section(".inittext"))) putchar(int ch)
 {
-	unsigned char c = ch;
+	struct biosregs ireg;
 
-	if (c == '\n')
+	if (ch == '\n')
 		putchar('\r');	/* \n -> \r\n */
 
-	/* int $0x10 is known to have bugs involving touching registers
-	   it shouldn't.  Be extra conservative... */
-	asm volatile("pushal; pushw %%ds; int $0x10; popw %%ds; popal"
-		     : : "b" (0x0007), "c" (0x0001), "a" (0x0e00|ch));
+	initregs(&ireg);
+	ireg.bx = 0x0007;
+	ireg.cx = 0x0001;
+	ireg.ah = 0x0e;
+	ireg.al = ch;
+	intcall(0x10, &ireg, NULL);
 }
 
 void __attribute__((section(".inittext"))) puts(const char *str)
 {
-	int n = 0;
-	while (*str) {
+	while (*str)
 		putchar(*str++);
-		n++;
-	}
 }
 
 /*
@@ -49,14 +49,13 @@ void __attribute__((section(".inittext"))) puts(const char *str)
 
 static u8 gettime(void)
 {
-	u16 ax = 0x0200;
-	u16 cx, dx;
+	struct biosregs ireg, oreg;
 
-	asm volatile("int $0x1a"
-		     : "+a" (ax), "=c" (cx), "=d" (dx)
-		     : : "ebx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x02;
+	intcall(0x1a, &ireg, &oreg);
 
-	return dx >> 8;
+	return oreg.dh;
 }
 
 /*
@@ -64,19 +63,24 @@ static u8 gettime(void)
  */
 int getchar(void)
 {
-	u16 ax = 0;
-	asm volatile("int $0x16" : "+a" (ax));
+	struct biosregs ireg, oreg;
+
+	initregs(&ireg);
+	/* ireg.ah = 0x00; */
+	intcall(0x16, &ireg, &oreg);
 
-	return ax & 0xff;
+	return oreg.al;
 }
 
 static int kbd_pending(void)
 {
-	u8 pending;
-	asm volatile("int $0x16; setnz %0"
-		     : "=qm" (pending)
-		     : "a" (0x0100));
-	return pending;
+	struct biosregs ireg, oreg;
+
+	initregs(&ireg);
+	ireg.ah = 0x01;
+	intcall(0x16, &ireg, &oreg);
+
+	return !(oreg.eflags & X86_EFLAGS_ZF);
 }
 
 void kbd_flush(void)
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index 3fa979c9c36..d660be49236 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -29,21 +30,21 @@ static int bios_set_mode(struct mode_info *mi)
 
 static int set_bios_mode(u8 mode)
 {
-	u16 ax;
+	struct biosregs ireg, oreg;
 	u8 new_mode;
 
-	ax = mode;		/* AH=0x00 Set Video Mode */
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
+	initregs(&ireg);
+	ireg.al = mode;		/* AH=0x00 Set Video Mode */
+	intcall(0x10, &ireg, NULL);
 
-	ax = 0x0f00;		/* Get Current Video Mode */
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
+
+	ireg.ah = 0x0f;		/* Get Current Video Mode */
+	intcall(0x10, &ireg, &oreg);
 
 	do_restore = 1;		/* Assume video contents were lost */
-	new_mode = ax & 0x7f;	/* Not all BIOSes are clean with the top bit */
+
+	/* Not all BIOSes are clean with the top bit */
+	new_mode = ireg.al & 0x7f;
 
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
@@ -53,10 +54,8 @@ static int set_bios_mode(u8 mode)
 		/* Mode setting failed, but we didn't end up where we
 		   started.  That's bad.  Try to revert to the original
 		   video mode. */
-		ax = boot_params.screen_info.orig_video_mode;
-		asm volatile(INT10
-			     : "+a" (ax)
-			     : : "ebx", "ecx", "edx", "esi", "edi");
+		ireg.ax = boot_params.screen_info.orig_video_mode;
+		intcall(0x10, &ireg, NULL);
 	}
 #endif
 	return -1;
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 4a58c8ce3f6..c700147d6ff 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -31,7 +32,7 @@ static inline void vesa_store_mode_params_graphics(void) {}
 static int vesa_probe(void)
 {
 #if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
-	u16 ax, cx, di;
+	struct biosregs ireg, oreg;
 	u16 mode;
 	addr_t mode_ptr;
 	struct mode_info *mi;
@@ -39,13 +40,12 @@ static int vesa_probe(void)
 
 	video_vesa.modes = GET_HEAP(struct mode_info, 0);
 
-	ax = 0x4f00;
-	di = (size_t)&vginfo;
-	asm(INT10
-	    : "+a" (ax), "+D" (di), "=m" (vginfo)
-	    : : "ebx", "ecx", "edx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f00;
+	ireg.di = (size_t)&vginfo;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f ||
+	if (ireg.ax != 0x004f ||
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
@@ -65,14 +65,12 @@ static int vesa_probe(void)
 
 		memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
 
-		ax = 0x4f01;
-		cx = mode;
-		di = (size_t)&vminfo;
-		asm(INT10
-		    : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
-		    : : "ebx", "edx", "esi");
+		ireg.ax = 0x4f01;
+		ireg.cx = mode;
+		ireg.di = (size_t)&vminfo;
+		intcall(0x10, &ireg, &oreg);
 
-		if (ax != 0x004f)
+		if (ireg.ax != 0x004f)
 			continue;
 
 		if ((vminfo.mode_attr & 0x15) == 0x05) {
@@ -111,20 +109,19 @@ static int vesa_probe(void)
 
 static int vesa_set_mode(struct mode_info *mode)
 {
-	u16 ax, bx, cx, di;
+	struct biosregs ireg, oreg;
 	int is_graphic;
 	u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA;
 
 	memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
 
-	ax = 0x4f01;
-	cx = vesa_mode;
-	di = (size_t)&vminfo;
-	asm(INT10
-	    : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
-	    : : "ebx", "edx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f01;
+	ireg.cx = vesa_mode;
+	ireg.di = (size_t)&vminfo;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return -1;
 
 	if ((vminfo.mode_attr & 0x15) == 0x05) {
@@ -141,14 +138,12 @@ static int vesa_set_mode(struct mode_info *mode)
 	}
 
 
-	ax = 0x4f02;
-	bx = vesa_mode;
-	di = 0;
-	asm volatile(INT10
-		     : "+a" (ax), "+b" (bx), "+D" (di)
-		     : : "ecx", "edx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f02;
+	ireg.bx = vesa_mode;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return -1;
 
 	graphic_mode = is_graphic;
@@ -171,50 +166,45 @@ static int vesa_set_mode(struct mode_info *mode)
 /* Switch DAC to 8-bit mode */
 static void vesa_dac_set_8bits(void)
 {
+	struct biosregs ireg, oreg;
 	u8 dac_size = 6;
 
 	/* If possible, switch the DAC to 8-bit mode */
 	if (vginfo.capabilities & 1) {
-		u16 ax, bx;
-
-		ax = 0x4f08;
-		bx = 0x0800;
-		asm volatile(INT10
-			     : "+a" (ax), "+b" (bx)
-			     : : "ecx", "edx", "esi", "edi");
-
-		if (ax == 0x004f)
-			dac_size = bx >> 8;
+		initregs(&ireg);
+		ireg.ax = 0x4f08;
+		ireg.bh = 0x08;
+		intcall(0x10, &ireg, &oreg);
+		if (oreg.ax == 0x004f)
+			dac_size = oreg.bh;
 	}
 
 	/* Set the color sizes to the DAC size, and offsets to 0 */
-	boot_params.screen_info.red_size = dac_size;
+	boot_params.screen_info.red_size   = dac_size;
 	boot_params.screen_info.green_size = dac_size;
-	boot_params.screen_info.blue_size = dac_size;
-	boot_params.screen_info.rsvd_size = dac_size;
+	boot_params.screen_info.blue_size  = dac_size;
+	boot_params.screen_info.rsvd_size  = dac_size;
 
-	boot_params.screen_info.red_pos = 0;
-	boot_params.screen_info.green_pos = 0;
-	boot_params.screen_info.blue_pos = 0;
-	boot_params.screen_info.rsvd_pos = 0;
+	boot_params.screen_info.red_pos    = 0;
+	boot_params.screen_info.green_pos  = 0;
+	boot_params.screen_info.blue_pos   = 0;
+	boot_params.screen_info.rsvd_pos   = 0;
 }
 
 /* Save the VESA protected mode info */
 static void vesa_store_pm_info(void)
 {
-	u16 ax, bx, di, es;
+	struct biosregs ireg, oreg;
 
-	ax = 0x4f0a;
-	bx = di = 0;
-	asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es"
-	    : "=d" (es), "+a" (ax), "+b" (bx), "+D" (di)
-	    : : "ecx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f0a;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return;
 
-	boot_params.screen_info.vesapm_seg = es;
-	boot_params.screen_info.vesapm_off = di;
+	boot_params.screen_info.vesapm_seg = oreg.es;
+	boot_params.screen_info.vesapm_off = oreg.di;
 }
 
 /*
@@ -252,7 +242,7 @@ static void vesa_store_mode_params_graphics(void)
 void vesa_store_edid(void)
 {
 #ifdef CONFIG_FIRMWARE_EDID
-	u16 ax, bx, cx, dx, di;
+	struct biosregs ireg, oreg;
 
 	/* Apparently used as a nonsense token... */
 	memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info);
@@ -260,33 +250,26 @@ void vesa_store_edid(void)
 	if (vginfo.version < 0x0200)
 		return;		/* EDID requires VBE 2.0+ */
 
-	ax = 0x4f15;		/* VBE DDC */
-	bx = 0x0000;		/* Report DDC capabilities */
-	cx = 0;			/* Controller 0 */
-	di = 0;			/* ES:DI must be 0 by spec */
-
-	/* Note: The VBE DDC spec is different from the main VESA spec;
-	   we genuinely have to assume all registers are destroyed here. */
-
-	asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
-	    : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di)
-	    : : "esi", "edx");
+	initregs(&ireg);
+	ireg.ax = 0x4f15;		/* VBE DDC */
+	/* ireg.bx = 0x0000; */		/* Report DDC capabilities */
+	/* ireg.cx = 0;	*/		/* Controller 0 */
+	ireg.es = 0;			/* ES:DI must be 0 by spec */
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return;		/* No EDID */
 
 	/* BH = time in seconds to transfer EDD information */
 	/* BL = DDC level supported */
 
-	ax = 0x4f15;		/* VBE DDC */
-	bx = 0x0001;		/* Read EDID */
-	cx = 0;			/* Controller 0 */
-	dx = 0;			/* EDID block number */
-	di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
-	asm(INT10
-	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info),
-	      "+c" (cx), "+D" (di)
-	    : : "esi");
+	ireg.ax = 0x4f15;		/* VBE DDC */
+	ireg.bx = 0x0001;		/* Read EDID */
+	/* ireg.cx = 0; */		/* Controller 0 */
+	/* ireg.dx = 0;	*/		/* EDID block number */
+	ireg.es = ds();
+	ireg.di =(size_t)&boot_params.edid_info; /* (ES:)Pointer to block */
+	intcall(0x10, &ireg, &oreg);
 #endif /* CONFIG_FIRMWARE_EDID */
 }
 
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 9e0587a3776..8f8d827e254 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -39,30 +40,30 @@ static __videocard video_vga;
 /* Set basic 80x25 mode */
 static u8 vga_set_basic_mode(void)
 {
+	struct biosregs ireg, oreg;
 	u16 ax;
 	u8 rows;
 	u8 mode;
 
+	initregs(&ireg);
+
 #ifdef CONFIG_VIDEO_400_HACK
 	if (adapter >= ADAPTER_VGA) {
-		asm volatile(INT10
-			     : : "a" (0x1202), "b" (0x0030)
-			     : "ecx", "edx", "esi", "edi");
+		ireg.ax = 0x1202;
+		ireg.bx = 0x0030;
+		intcall(0x10, &ireg, NULL);
 	}
 #endif
 
 	ax = 0x0f00;
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
-
-	mode = (u8)ax;
+	intcall(0x10, &ireg, &oreg);
+	mode = oreg.al;
 
 	set_fs(0);
 	rows = rdfs8(0x484);	/* rows minus one */
 
 #ifndef CONFIG_VIDEO_400_HACK
-	if ((ax == 0x5003 || ax == 0x5007) &&
+	if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
 	    (rows == 0 || rows == 24))
 		return mode;
 #endif
@@ -71,10 +72,8 @@ static u8 vga_set_basic_mode(void)
 		mode = 3;
 
 	/* Set the mode */
-	ax = mode;
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
+	ireg.ax = mode;		/* AH=0: set mode */
+	intcall(0x10, &ireg, NULL);
 	do_restore = 1;
 	return mode;
 }
@@ -82,43 +81,69 @@ static u8 vga_set_basic_mode(void)
 static void vga_set_8font(void)
 {
 	/* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */
+	struct biosregs ireg;
+
+	initregs(&ireg);
 
 	/* Set 8x8 font */
-	asm volatile(INT10 : : "a" (0x1112), "b" (0));
+	ireg.ax = 0x1112;
+	/* ireg.bl = 0; */
+	intcall(0x10, &ireg, NULL);
 
 	/* Use alternate print screen */
-	asm volatile(INT10 : : "a" (0x1200), "b" (0x20));
+	ireg.ax = 0x1200;
+	ireg.bl = 0x20;
+	intcall(0x10, &ireg, NULL);
 
 	/* Turn off cursor emulation */
-	asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+	ireg.ax = 0x1201;
+	ireg.bl = 0x34;
+	intcall(0x10, &ireg, NULL);
 
 	/* Cursor is scan lines 6-7 */
-	asm volatile(INT10 : : "a" (0x0100), "c" (0x0607));
+	ireg.ax = 0x0100;
+	ireg.cx = 0x0607;
+	intcall(0x10, &ireg, NULL);
 }
 
 static void vga_set_14font(void)
 {
 	/* Set 9x14 font - 80x28 on VGA */
+	struct biosregs ireg;
+
+	initregs(&ireg);
 
 	/* Set 9x14 font */
-	asm volatile(INT10 : : "a" (0x1111), "b" (0));
+	ireg.ax = 0x1111;
+	/* ireg.bl = 0; */
+	intcall(0x10, &ireg, NULL);
 
 	/* Turn off cursor emulation */
-	asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+	ireg.ax = 0x1201;
+	ireg.bl = 0x34;
+	intcall(0x10, &ireg, NULL);
 
 	/* Cursor is scan lines 11-12 */
-	asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c));
+	ireg.ax = 0x0100;
+	ireg.cx = 0x0b0c;
+	intcall(0x10, &ireg, NULL);
 }
 
 static void vga_set_80x43(void)
 {
 	/* Set 80x43 mode on VGA (not EGA) */
+	struct biosregs ireg;
+
+	initregs(&ireg);
 
 	/* Set 350 scans */
-	asm volatile(INT10 : : "a" (0x1201), "b" (0x30));
+	ireg.ax = 0x1201;
+	ireg.bl = 0x30;
+	intcall(0x10, &ireg, NULL);
 
 	/* Reset video mode */
-	asm volatile(INT10 : : "a" (0x0003));
+	ireg.ax = 0x0003;
+	intcall(0x10, &ireg, NULL);
 
 	vga_set_8font();
 }
@@ -225,8 +250,6 @@ static int vga_set_mode(struct mode_info *mode)
  */
 static int vga_probe(void)
 {
-	u16 ega_bx;
-
 	static const char *card_name[] = {
 		"CGA/MDA/HGC", "EGA", "VGA"
 	};
@@ -240,26 +263,26 @@ static int vga_probe(void)
 		sizeof(ega_modes)/sizeof(struct mode_info),
 		sizeof(vga_modes)/sizeof(struct mode_info),
 	};
-	u8 vga_flag;
 
-	asm(INT10
-	    : "=b" (ega_bx)
-	    : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
-	    : "ecx", "edx", "esi", "edi");
+	struct biosregs ireg, oreg;
+
+	initregs(&ireg);
+
+	ireg.ax = 0x1200;
+	ireg.bl = 0x10;		/* Check EGA/VGA */
+	intcall(0x10, &ireg, &oreg);
 
 #ifndef _WAKEUP
-	boot_params.screen_info.orig_video_ega_bx = ega_bx;
+	boot_params.screen_info.orig_video_ega_bx = oreg.bx;
 #endif
 
 	/* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
-	if ((u8)ega_bx != 0x10) {
+	if (oreg.bl != 0x10) {
 		/* EGA/VGA */
-		asm(INT10
-		    : "=a" (vga_flag)
-		    : "a" (0x1a00)
-		    : "ebx", "ecx", "edx", "esi", "edi");
+		ireg.ax = 0x1a00;
+		intcall(0x10, &ireg, &oreg);
 
-		if (vga_flag == 0x1a) {
+		if (oreg.al == 0x1a) {
 			adapter = ADAPTER_VGA;
 #ifndef _WAKEUP
 			boot_params.screen_info.orig_video_isVGA = 1;
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index 3bef2c1febe..bad728b76fc 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -18,33 +19,29 @@
 
 static void store_cursor_position(void)
 {
-	u16 curpos;
-	u16 ax, bx;
+	struct biosregs ireg, oreg;
 
-	ax = 0x0300;
-	bx = 0;
-	asm(INT10
-	    : "=d" (curpos), "+a" (ax), "+b" (bx)
-	    : : "ecx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x03;
+	intcall(0x10, &ireg, &oreg);
 
-	boot_params.screen_info.orig_x = curpos;
-	boot_params.screen_info.orig_y = curpos >> 8;
+	boot_params.screen_info.orig_x = oreg.dl;
+	boot_params.screen_info.orig_y = oreg.dh;
 }
 
 static void store_video_mode(void)
 {
-	u16 ax, page;
+	struct biosregs ireg, oreg;
 
 	/* N.B.: the saving of the video page here is a bit silly,
 	   since we pretty much assume page 0 everywhere. */
-	ax = 0x0f00;
-	asm(INT10
-	    : "+a" (ax), "=b" (page)
-	    : : "ecx", "edx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x0f;
+	intcall(0x10, &ireg, &oreg);
 
 	/* Not all BIOSes are clean with respect to the top bit */
-	boot_params.screen_info.orig_video_mode = ax & 0x7f;
-	boot_params.screen_info.orig_video_page = page >> 8;
+	boot_params.screen_info.orig_video_mode = oreg.al & 0x7f;
+	boot_params.screen_info.orig_video_page = oreg.bh;
 }
 
 /*
@@ -257,7 +254,7 @@ static void restore_screen(void)
 	int y;
 	addr_t dst = 0;
 	u16 *src = saved.data;
-	u16 ax, bx, dx;
+	struct biosregs ireg;
 
 	if (graphic_mode)
 		return;		/* Can't restore onto a graphic mode */
@@ -296,12 +293,11 @@ static void restore_screen(void)
 	}
 
 	/* Restore cursor position */
-	ax = 0x0200;		/* Set cursor position */
-	bx = 0;			/* Page number (<< 8) */
-	dx = (saved.cury << 8)+saved.curx;
-	asm volatile(INT10
-		     : "+a" (ax), "+b" (bx), "+d" (dx)
-		     : : "ecx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x02;		/* Set cursor position */
+	ireg.dh = saved.cury;
+	ireg.dl = saved.curx;
+	intcall(0x10, &ireg, NULL);
 }
 #else
 #define save_screen()		((void)0)
diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h
index ee63f5d1446..5bb174a997f 100644
--- a/arch/x86/boot/video.h
+++ b/arch/x86/boot/video.h
@@ -112,20 +112,6 @@ extern int force_x, force_y;	/* Don't query the BIOS for cols/rows */
 extern int do_restore;		/* Restore screen contents */
 extern int graphic_mode;	/* Graphics mode with linear frame buffer */
 
-/*
- * int $0x10 is notorious for touching registers it shouldn't.
- * gcc doesn't like %ebp being clobbered, so define it as a push/pop
- * sequence here.
- *
- * A number of systems, including the original PC can clobber %bp in
- * certain circumstances, like when scrolling.  There exists at least
- * one Trident video card which could clobber DS under a set of
- * circumstances that we are unlikely to encounter (scrolling when
- * using an extended graphics mode of more than 800x600 pixels), but
- * it's cheap insurance to deal with that here.
- */
-#define INT10 "pushl %%ebp; pushw %%ds; int $0x10; popw %%ds; popl %%ebp"
-
 /* Accessing VGA indexed registers */
 static inline u8 in_idx(u16 port, u8 index)
 {
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 235b81d0f6f..edb992ebef9 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:50:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:21:55 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -33,6 +34,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
 # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -40,15 +42,16 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 # CONFIG_AUDIT_ARCH is not set
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_32_SMP=y
 CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
+CONFIG_X86_32_LAZY_GS=y
 CONFIG_KTIME_SCALAR=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -60,10 +63,17 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
@@ -113,23 +123,26 @@ CONFIG_PID_NS=y
 CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -139,6 +152,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -154,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -167,7 +183,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,12 +209,12 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
 # CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
+# CONFIG_X86_32_NON_STANDARD is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
@@ -230,8 +245,10 @@ CONFIG_M686=y
 # CONFIG_GENERIC_CPU is not set
 CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=5
 CONFIG_X86_XADD=y
 # CONFIG_X86_PPRO_FENCE is not set
 CONFIG_X86_WP_WORKS_OK=y
@@ -247,7 +264,7 @@ CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_CPU_SUP_INTEL=y
 CONFIG_CPU_SUP_CYRIX_32=y
 CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_CENTAUR=y
 CONFIG_CPU_SUP_TRANSMETA_32=y
 CONFIG_CPU_SUP_UMC_32=y
 CONFIG_X86_DS=y
@@ -279,6 +296,7 @@ CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
@@ -302,6 +320,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_HIGHPTE=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
@@ -312,6 +332,7 @@ CONFIG_MTRR=y
 CONFIG_X86_PAT=y
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
@@ -322,8 +343,9 @@ CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
 # CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_X86_NEED_RELOCS=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -363,7 +385,6 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
 # CONFIG_ACPI_SBS is not set
@@ -425,6 +446,7 @@ CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_DMAR is not set
 CONFIG_PCIEPORTBUS=y
 # CONFIG_HOTPLUG_PCI_PCIE is not set
 CONFIG_PCIEAER=y
@@ -435,6 +457,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
 CONFIG_ISA_DMA_API=y
 # CONFIG_ISA is not set
 # CONFIG_MCA is not set
@@ -481,7 +504,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -639,6 +661,7 @@ CONFIG_LLC=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -696,6 +719,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 CONFIG_HAMRADIO=y
 
 #
@@ -706,12 +730,10 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -789,6 +811,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -842,6 +865,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -940,6 +964,7 @@ CONFIG_DM_ZERO=y
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -977,6 +1002,8 @@ CONFIG_MII=y
 CONFIG_NET_VENDOR_3COM=y
 # CONFIG_VORTEX is not set
 # CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -1026,6 +1053,7 @@ CONFIG_E1000=y
 CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1040,6 +1068,7 @@ CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -1049,6 +1078,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -1058,6 +1088,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
 # CONFIG_IBMLS is not set
@@ -1073,8 +1104,8 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_PRISM54 is not set
@@ -1084,21 +1115,21 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1209,6 +1240,8 @@ CONFIG_INPUT_TABLET=y
 # CONFIG_TABLET_USB_KBTAB is not set
 # CONFIG_TABLET_USB_WACOM is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -1303,6 +1336,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_HW_RANDOM_INTEL=y
 CONFIG_HW_RANDOM_AMD=y
 CONFIG_HW_RANDOM_GEODE=y
@@ -1390,7 +1424,6 @@ CONFIG_I2C_I801=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1424,6 +1457,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_K8TEMP is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1433,6 +1467,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_CORETEMP is not set
@@ -1448,11 +1483,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1643,7 +1681,6 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
@@ -1652,6 +1689,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -1738,6 +1776,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1811,15 +1851,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1885,11 +1927,11 @@ CONFIG_USB_PRINTER=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1931,7 +1973,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1947,6 +1988,7 @@ CONFIG_USB_LIBUSUAL=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1958,8 +2000,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1969,6 +2013,10 @@ CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -2037,6 +2085,7 @@ CONFIG_DMADEVICES=y
 # DMA Devices
 #
 # CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 CONFIG_X86_PLATFORM_DEVICES=y
@@ -2071,6 +2120,7 @@ CONFIG_DMIID=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -2101,6 +2151,11 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -2151,6 +2206,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -2164,7 +2220,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2251,6 +2306,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -2266,6 +2322,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -2289,13 +2346,19 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -2305,13 +2368,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_POWER_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -2321,7 +2392,6 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
@@ -2329,7 +2399,7 @@ CONFIG_DEBUG_RODATA=y
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
 CONFIG_DOUBLEFAULT=y
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2365,6 +2435,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
 CONFIG_CRYPTO=y
 
 #
@@ -2380,10 +2452,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -2456,6 +2530,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2467,11 +2542,13 @@ CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_GEODE is not set
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
 CONFIG_VIRTUALIZATION=y
 # CONFIG_KVM is not set
 # CONFIG_LGUEST is not set
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -2489,7 +2566,10 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 9fe5d212ab4..cee1dd2e69b 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:44:16 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:22:00 2009
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -34,6 +35,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
 CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -41,14 +43,14 @@ CONFIG_ZONE_DMA32=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_64_SMP=y
 CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 # CONFIG_KTIME_SCALAR is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -61,10 +63,17 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
@@ -114,23 +123,26 @@ CONFIG_PID_NS=y
 CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -140,6 +152,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -155,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -167,7 +182,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -195,12 +209,10 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_SPARSE_IRQ=y
-# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_UV is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
@@ -230,10 +242,10 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_MCORE2 is not set
 CONFIG_GENERIC_CPU=y
 CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_TSC=y
 CONFIG_X86_CMPXCHG64=y
@@ -242,7 +254,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_CPU_SUP_INTEL=y
 CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_CPU_SUP_CENTAUR=y
 CONFIG_X86_DS=y
 CONFIG_X86_PTRACE_BTS=y
 CONFIG_HPET_TIMER=y
@@ -269,6 +281,7 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_INTEL=y
 CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
 # CONFIG_I8K is not set
 CONFIG_MICROCODE=y
 CONFIG_MICROCODE_INTEL=y
@@ -276,6 +289,7 @@ CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
 CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_DIRECT_GBPAGES=y
 CONFIG_NUMA=y
@@ -309,6 +323,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
 CONFIG_X86_RESERVE_LOW_64K=y
@@ -317,6 +333,7 @@ CONFIG_MTRR=y
 CONFIG_X86_PAT=y
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
@@ -325,9 +342,10 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -370,7 +388,6 @@ CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
 # CONFIG_ACPI_SBS is not set
@@ -436,6 +453,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
 CONFIG_ISA_DMA_API=y
 CONFIG_K8_NB=y
 CONFIG_PCCARD=y
@@ -481,7 +499,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -639,6 +656,7 @@ CONFIG_LLC=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -696,6 +714,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 CONFIG_HAMRADIO=y
 
 #
@@ -706,12 +725,10 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -788,9 +805,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_SGI_XP is not set
 # CONFIG_HP_ILO is not set
-# CONFIG_SGI_GRU is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -844,6 +860,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -940,6 +957,7 @@ CONFIG_DM_ZERO=y
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -977,6 +995,8 @@ CONFIG_MII=y
 CONFIG_NET_VENDOR_3COM=y
 # CONFIG_VORTEX is not set
 # CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -1026,6 +1046,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1040,6 +1061,7 @@ CONFIG_TIGON3=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -1049,6 +1071,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -1058,6 +1081,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
@@ -1072,8 +1096,8 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_PRISM54 is not set
@@ -1083,21 +1107,21 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1208,6 +1232,8 @@ CONFIG_INPUT_TABLET=y
 # CONFIG_TABLET_USB_KBTAB is not set
 # CONFIG_TABLET_USB_WACOM is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -1301,6 +1327,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_HW_RANDOM_INTEL is not set
 # CONFIG_HW_RANDOM_AMD is not set
 CONFIG_NVRAM=y
@@ -1382,7 +1409,6 @@ CONFIG_I2C_I801=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1416,6 +1442,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_K8TEMP is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1425,6 +1452,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_CORETEMP is not set
@@ -1440,11 +1468,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1635,6 +1666,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -1720,6 +1752,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1792,15 +1826,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1866,11 +1902,11 @@ CONFIG_USB_PRINTER=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1912,7 +1948,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1928,6 +1963,7 @@ CONFIG_USB_LIBUSUAL=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1939,8 +1975,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1950,6 +1988,10 @@ CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -2018,6 +2060,7 @@ CONFIG_DMADEVICES=y
 # DMA Devices
 #
 # CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 CONFIG_X86_PLATFORM_DEVICES=y
@@ -2051,6 +2094,7 @@ CONFIG_DMIID=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -2082,6 +2126,11 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -2132,6 +2181,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -2145,7 +2195,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2232,6 +2281,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -2247,6 +2297,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -2269,13 +2320,19 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -2285,13 +2342,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_POWER_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -2301,14 +2366,13 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_IOMMU_DEBUG is not set
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2344,6 +2408,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
 CONFIG_CRYPTO=y
 
 #
@@ -2359,10 +2425,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -2414,6 +2482,7 @@ CONFIG_CRYPTO_SHA1=y
 #
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -2435,6 +2504,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2444,10 +2514,12 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
 CONFIG_VIRTUALIZATION=y
 # CONFIG_KVM is not set
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -2464,7 +2536,10 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index ebe7deedd5b..cfb0010fa94 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -2,6 +2,8 @@
 # Arch-specific CryptoAPI modules.
 #
 
+obj-$(CONFIG_CRYPTO_FPU) += fpu.o
+
 obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
 obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
 obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 02af0af6549..4e663398f77 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -21,6 +21,22 @@
 #include <asm/i387.h>
 #include <asm/aes.h>
 
+#if defined(CONFIG_CRYPTO_CTR) || defined(CONFIG_CRYPTO_CTR_MODULE)
+#define HAS_CTR
+#endif
+
+#if defined(CONFIG_CRYPTO_LRW) || defined(CONFIG_CRYPTO_LRW_MODULE)
+#define HAS_LRW
+#endif
+
+#if defined(CONFIG_CRYPTO_PCBC) || defined(CONFIG_CRYPTO_PCBC_MODULE)
+#define HAS_PCBC
+#endif
+
+#if defined(CONFIG_CRYPTO_XTS) || defined(CONFIG_CRYPTO_XTS_MODULE)
+#define HAS_XTS
+#endif
+
 struct async_aes_ctx {
 	struct cryptd_ablkcipher *cryptd_tfm;
 };
@@ -137,6 +153,41 @@ static struct crypto_alg aesni_alg = {
 	}
 };
 
+static void __aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+	aesni_enc(ctx, dst, src);
+}
+
+static void __aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+	aesni_dec(ctx, dst, src);
+}
+
+static struct crypto_alg __aesni_alg = {
+	.cra_name		= "__aes-aesni",
+	.cra_driver_name	= "__driver-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+	.cra_alignmask		= 0,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(__aesni_alg.cra_list),
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= AES_MIN_KEY_SIZE,
+			.cia_max_keysize	= AES_MAX_KEY_SIZE,
+			.cia_setkey		= aes_set_key,
+			.cia_encrypt		= __aes_encrypt,
+			.cia_decrypt		= __aes_decrypt
+		}
+	}
+};
+
 static int ecb_encrypt(struct blkcipher_desc *desc,
 		       struct scatterlist *dst, struct scatterlist *src,
 		       unsigned int nbytes)
@@ -277,8 +328,16 @@ static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
 			unsigned int key_len)
 {
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+	struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base;
+	int err;
 
-	return crypto_ablkcipher_setkey(&ctx->cryptd_tfm->base, key, key_len);
+	crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+	crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm)
+				    & CRYPTO_TFM_REQ_MASK);
+	err = crypto_ablkcipher_setkey(child, key, key_len);
+	crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child)
+				    & CRYPTO_TFM_RES_MASK);
+	return err;
 }
 
 static int ablk_encrypt(struct ablkcipher_request *req)
@@ -411,6 +470,163 @@ static struct crypto_alg ablk_cbc_alg = {
 	},
 };
 
+#ifdef HAS_CTR
+static int ablk_ctr_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(ctr(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_ctr_alg = {
+	.cra_name		= "ctr(aes)",
+	.cra_driver_name	= "ctr-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_ctr_alg.cra_list),
+	.cra_init		= ablk_ctr_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+			.geniv		= "chainiv",
+		},
+	},
+};
+#endif
+
+#ifdef HAS_LRW
+static int ablk_lrw_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(lrw(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_lrw_alg = {
+	.cra_name		= "lrw(aes)",
+	.cra_driver_name	= "lrw-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_lrw_alg.cra_list),
+	.cra_init		= ablk_lrw_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE + AES_BLOCK_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE + AES_BLOCK_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+#endif
+
+#ifdef HAS_PCBC
+static int ablk_pcbc_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(pcbc(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_pcbc_alg = {
+	.cra_name		= "pcbc(aes)",
+	.cra_driver_name	= "pcbc-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_pcbc_alg.cra_list),
+	.cra_init		= ablk_pcbc_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+#endif
+
+#ifdef HAS_XTS
+static int ablk_xts_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(xts(__driver-aes-aesni))",
+					     0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_xts_alg = {
+	.cra_name		= "xts(aes)",
+	.cra_driver_name	= "xts-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_xts_alg.cra_list),
+	.cra_init		= ablk_xts_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+			.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+#endif
+
 static int __init aesni_init(void)
 {
 	int err;
@@ -421,6 +637,8 @@ static int __init aesni_init(void)
 	}
 	if ((err = crypto_register_alg(&aesni_alg)))
 		goto aes_err;
+	if ((err = crypto_register_alg(&__aesni_alg)))
+		goto __aes_err;
 	if ((err = crypto_register_alg(&blk_ecb_alg)))
 		goto blk_ecb_err;
 	if ((err = crypto_register_alg(&blk_cbc_alg)))
@@ -429,9 +647,41 @@ static int __init aesni_init(void)
 		goto ablk_ecb_err;
 	if ((err = crypto_register_alg(&ablk_cbc_alg)))
 		goto ablk_cbc_err;
+#ifdef HAS_CTR
+	if ((err = crypto_register_alg(&ablk_ctr_alg)))
+		goto ablk_ctr_err;
+#endif
+#ifdef HAS_LRW
+	if ((err = crypto_register_alg(&ablk_lrw_alg)))
+		goto ablk_lrw_err;
+#endif
+#ifdef HAS_PCBC
+	if ((err = crypto_register_alg(&ablk_pcbc_alg)))
+		goto ablk_pcbc_err;
+#endif
+#ifdef HAS_XTS
+	if ((err = crypto_register_alg(&ablk_xts_alg)))
+		goto ablk_xts_err;
+#endif
 
 	return err;
 
+#ifdef HAS_XTS
+ablk_xts_err:
+#endif
+#ifdef HAS_PCBC
+	crypto_unregister_alg(&ablk_pcbc_alg);
+ablk_pcbc_err:
+#endif
+#ifdef HAS_LRW
+	crypto_unregister_alg(&ablk_lrw_alg);
+ablk_lrw_err:
+#endif
+#ifdef HAS_CTR
+	crypto_unregister_alg(&ablk_ctr_alg);
+ablk_ctr_err:
+#endif
+	crypto_unregister_alg(&ablk_cbc_alg);
 ablk_cbc_err:
 	crypto_unregister_alg(&ablk_ecb_alg);
 ablk_ecb_err:
@@ -439,6 +689,8 @@ ablk_ecb_err:
 blk_cbc_err:
 	crypto_unregister_alg(&blk_ecb_alg);
 blk_ecb_err:
+	crypto_unregister_alg(&__aesni_alg);
+__aes_err:
 	crypto_unregister_alg(&aesni_alg);
 aes_err:
 	return err;
@@ -446,10 +698,23 @@ aes_err:
 
 static void __exit aesni_exit(void)
 {
+#ifdef HAS_XTS
+	crypto_unregister_alg(&ablk_xts_alg);
+#endif
+#ifdef HAS_PCBC
+	crypto_unregister_alg(&ablk_pcbc_alg);
+#endif
+#ifdef HAS_LRW
+	crypto_unregister_alg(&ablk_lrw_alg);
+#endif
+#ifdef HAS_CTR
+	crypto_unregister_alg(&ablk_ctr_alg);
+#endif
 	crypto_unregister_alg(&ablk_cbc_alg);
 	crypto_unregister_alg(&ablk_ecb_alg);
 	crypto_unregister_alg(&blk_cbc_alg);
 	crypto_unregister_alg(&blk_ecb_alg);
+	crypto_unregister_alg(&__aesni_alg);
 	crypto_unregister_alg(&aesni_alg);
 }
 
diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
new file mode 100644
index 00000000000..5f9781a3815
--- /dev/null
+++ b/arch/x86/crypto/fpu.c
@@ -0,0 +1,166 @@
+/*
+ * FPU: Wrapper for blkcipher touching fpu
+ *
+ * Copyright (c) Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <crypto/algapi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/i387.h>
+
+struct crypto_fpu_ctx {
+	struct crypto_blkcipher *child;
+};
+
+static int crypto_fpu_setkey(struct crypto_tfm *parent, const u8 *key,
+			     unsigned int keylen)
+{
+	struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(parent);
+	struct crypto_blkcipher *child = ctx->child;
+	int err;
+
+	crypto_blkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+	crypto_blkcipher_set_flags(child, crypto_tfm_get_flags(parent) &
+				   CRYPTO_TFM_REQ_MASK);
+	err = crypto_blkcipher_setkey(child, key, keylen);
+	crypto_tfm_set_flags(parent, crypto_blkcipher_get_flags(child) &
+				     CRYPTO_TFM_RES_MASK);
+	return err;
+}
+
+static int crypto_fpu_encrypt(struct blkcipher_desc *desc_in,
+			      struct scatterlist *dst, struct scatterlist *src,
+			      unsigned int nbytes)
+{
+	int err;
+	struct crypto_fpu_ctx *ctx = crypto_blkcipher_ctx(desc_in->tfm);
+	struct crypto_blkcipher *child = ctx->child;
+	struct blkcipher_desc desc = {
+		.tfm = child,
+		.info = desc_in->info,
+		.flags = desc_in->flags,
+	};
+
+	kernel_fpu_begin();
+	err = crypto_blkcipher_crt(desc.tfm)->encrypt(&desc, dst, src, nbytes);
+	kernel_fpu_end();
+	return err;
+}
+
+static int crypto_fpu_decrypt(struct blkcipher_desc *desc_in,
+			      struct scatterlist *dst, struct scatterlist *src,
+			      unsigned int nbytes)
+{
+	int err;
+	struct crypto_fpu_ctx *ctx = crypto_blkcipher_ctx(desc_in->tfm);
+	struct crypto_blkcipher *child = ctx->child;
+	struct blkcipher_desc desc = {
+		.tfm = child,
+		.info = desc_in->info,
+		.flags = desc_in->flags,
+	};
+
+	kernel_fpu_begin();
+	err = crypto_blkcipher_crt(desc.tfm)->decrypt(&desc, dst, src, nbytes);
+	kernel_fpu_end();
+	return err;
+}
+
+static int crypto_fpu_init_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
+	struct crypto_spawn *spawn = crypto_instance_ctx(inst);
+	struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_blkcipher *cipher;
+
+	cipher = crypto_spawn_blkcipher(spawn);
+	if (IS_ERR(cipher))
+		return PTR_ERR(cipher);
+
+	ctx->child = cipher;
+	return 0;
+}
+
+static void crypto_fpu_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(tfm);
+	crypto_free_blkcipher(ctx->child);
+}
+
+static struct crypto_instance *crypto_fpu_alloc(struct rtattr **tb)
+{
+	struct crypto_instance *inst;
+	struct crypto_alg *alg;
+	int err;
+
+	err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER);
+	if (err)
+		return ERR_PTR(err);
+
+	alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_BLKCIPHER,
+				  CRYPTO_ALG_TYPE_MASK);
+	if (IS_ERR(alg))
+		return ERR_CAST(alg);
+
+	inst = crypto_alloc_instance("fpu", alg);
+	if (IS_ERR(inst))
+		goto out_put_alg;
+
+	inst->alg.cra_flags = alg->cra_flags;
+	inst->alg.cra_priority = alg->cra_priority;
+	inst->alg.cra_blocksize = alg->cra_blocksize;
+	inst->alg.cra_alignmask = alg->cra_alignmask;
+	inst->alg.cra_type = alg->cra_type;
+	inst->alg.cra_blkcipher.ivsize = alg->cra_blkcipher.ivsize;
+	inst->alg.cra_blkcipher.min_keysize = alg->cra_blkcipher.min_keysize;
+	inst->alg.cra_blkcipher.max_keysize = alg->cra_blkcipher.max_keysize;
+	inst->alg.cra_ctxsize = sizeof(struct crypto_fpu_ctx);
+	inst->alg.cra_init = crypto_fpu_init_tfm;
+	inst->alg.cra_exit = crypto_fpu_exit_tfm;
+	inst->alg.cra_blkcipher.setkey = crypto_fpu_setkey;
+	inst->alg.cra_blkcipher.encrypt = crypto_fpu_encrypt;
+	inst->alg.cra_blkcipher.decrypt = crypto_fpu_decrypt;
+
+out_put_alg:
+	crypto_mod_put(alg);
+	return inst;
+}
+
+static void crypto_fpu_free(struct crypto_instance *inst)
+{
+	crypto_drop_spawn(crypto_instance_ctx(inst));
+	kfree(inst);
+}
+
+static struct crypto_template crypto_fpu_tmpl = {
+	.name = "fpu",
+	.alloc = crypto_fpu_alloc,
+	.free = crypto_fpu_free,
+	.module = THIS_MODULE,
+};
+
+static int __init crypto_fpu_module_init(void)
+{
+	return crypto_register_template(&crypto_fpu_tmpl);
+}
+
+static void __exit crypto_fpu_module_exit(void)
+{
+	crypto_unregister_template(&crypto_fpu_tmpl);
+}
+
+module_init(crypto_fpu_module_init);
+module_exit(crypto_fpu_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FPU block cipher wrapper");
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index a505202086e..e590261ba05 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -825,9 +825,11 @@ ia32_sys_call_table:
 	.quad compat_sys_signalfd4
 	.quad sys_eventfd2
 	.quad sys_epoll_create1
-	.quad sys_dup3			/* 330 */
+	.quad sys_dup3				/* 330 */
 	.quad sys_pipe2
 	.quad sys_inotify_init1
 	.quad compat_sys_preadv
 	.quad compat_sys_pwritev
+	.quad compat_sys_rt_tgsigqueueinfo	/* 335 */
+	.quad sys_perf_counter_open
 ia32_syscall_end:
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index f6aa18eadf7..1a37bcdc860 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <linux/stddef.h>
+#include <linux/stringify.h>
 #include <asm/asm.h>
 
 /*
@@ -74,6 +75,22 @@ static inline void alternatives_smp_switch(int smp) {}
 
 const unsigned char *const *find_nop_table(void);
 
+/* alternative assembly primitive: */
+#define ALTERNATIVE(oldinstr, newinstr, feature)			\
+									\
+      "661:\n\t" oldinstr "\n662:\n"					\
+      ".section .altinstructions,\"a\"\n"				\
+      _ASM_ALIGN "\n"							\
+      _ASM_PTR "661b\n"				/* label           */	\
+      _ASM_PTR "663f\n"				/* new instruction */	\
+      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .byte 662b-661b\n"			/* sourcelen       */	\
+      "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .altinstr_replacement, \"ax\"\n"			\
+      "663:\n\t" newinstr "\n664:\n"		/* replacement     */	\
+      ".previous"
+
 /*
  * Alternative instructions for different CPU types or capabilities.
  *
@@ -87,18 +104,7 @@ const unsigned char *const *find_nop_table(void);
  * without volatile and memory clobber.
  */
 #define alternative(oldinstr, newinstr, feature)			\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature) : "memory")
+	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) : : : "memory")
 
 /*
  * Alternative inline assembly with input.
@@ -109,35 +115,16 @@ const unsigned char *const *find_nop_table(void);
  * Best is to use constraints that are fixed size (like (%1) ... "r")
  * If you use variable sized constraints like "m" or "g" in the
  * replacement make sure to pad to the worst case length.
+ * Leaving an unused argument 0 to keep API compatibility.
  */
 #define alternative_input(oldinstr, newinstr, feature, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature), ##input)
+	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature)		\
+		: : "i" (0), ## input)
 
 /* Like alternative_input, but with a single output argument */
 #define alternative_io(oldinstr, newinstr, feature, output, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c[feat]\n"	/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
-		      ".previous" : output : [feat] "i" (feature), ##input)
+	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature)		\
+		: output : "i" (0), ## input)
 
 /*
  * use this macro(s) if you need more than one output parameter
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index f712344329b..262e0282004 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -27,6 +27,8 @@ extern int amd_iommu_init(void);
 extern int amd_iommu_init_dma_ops(void);
 extern void amd_iommu_detect(void);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+extern void amd_iommu_flush_all_domains(void);
+extern void amd_iommu_flush_all_devices(void);
 #else
 static inline int amd_iommu_init(void) { return -ENODEV; }
 static inline void amd_iommu_detect(void) { }
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 95c8cd9d22b..0c878caaa0a 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -194,6 +194,27 @@
 #define PD_DMA_OPS_MASK		(1UL << 0) /* domain used for dma_ops */
 #define PD_DEFAULT_MASK		(1UL << 1) /* domain is a default dma_ops
 					      domain for an IOMMU */
+extern bool amd_iommu_dump;
+#define DUMP_printk(format, arg...)					\
+	do {								\
+		if (amd_iommu_dump)						\
+			printk(KERN_INFO "AMD IOMMU: " format, ## arg);	\
+	} while(0);
+
+/*
+ * Make iterating over all IOMMUs easier
+ */
+#define for_each_iommu(iommu) \
+	list_for_each_entry((iommu), &amd_iommu_list, list)
+#define for_each_iommu_safe(iommu, next) \
+	list_for_each_entry_safe((iommu), (next), &amd_iommu_list, list)
+
+#define APERTURE_RANGE_SHIFT	27	/* 128 MB */
+#define APERTURE_RANGE_SIZE	(1ULL << APERTURE_RANGE_SHIFT)
+#define APERTURE_RANGE_PAGES	(APERTURE_RANGE_SIZE >> PAGE_SHIFT)
+#define APERTURE_MAX_RANGES	32	/* allows 4GB of DMA address space */
+#define APERTURE_RANGE_INDEX(a)	((a) >> APERTURE_RANGE_SHIFT)
+#define APERTURE_PAGE_INDEX(a)	(((a) >> 21) & 0x3fULL)
 
 /*
  * This structure contains generic data for  IOMMU protection domains
@@ -210,6 +231,26 @@ struct protection_domain {
 };
 
 /*
+ * For dynamic growth the aperture size is split into ranges of 128MB of
+ * DMA address space each. This struct represents one such range.
+ */
+struct aperture_range {
+
+	/* address allocation bitmap */
+	unsigned long *bitmap;
+
+	/*
+	 * Array of PTE pages for the aperture. In this array we save all the
+	 * leaf pages of the domain page table used for the aperture. This way
+	 * we don't need to walk the page table to find a specific PTE. We can
+	 * just calculate its address in constant time.
+	 */
+	u64 *pte_pages[64];
+
+	unsigned long offset;
+};
+
+/*
  * Data container for a dma_ops specific protection domain
  */
 struct dma_ops_domain {
@@ -222,18 +263,10 @@ struct dma_ops_domain {
 	unsigned long aperture_size;
 
 	/* address we start to search for free addresses */
-	unsigned long next_bit;
-
-	/* address allocation bitmap */
-	unsigned long *bitmap;
+	unsigned long next_address;
 
-	/*
-	 * Array of PTE pages for the aperture. In this array we save all the
-	 * leaf pages of the domain page table used for the aperture. This way
-	 * we don't need to walk the page table to find a specific PTE. We can
-	 * just calculate its address in constant time.
-	 */
-	u64 **pte_pages;
+	/* address space relevant data */
+	struct aperture_range *aperture[APERTURE_MAX_RANGES];
 
 	/* This will be set to true when TLB needs to be flushed */
 	bool need_flush;
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 42f2f837742..bb7d4792584 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -107,8 +107,7 @@ extern u32 native_safe_apic_wait_icr_idle(void);
 extern void native_apic_icr_write(u32 low, u32 id);
 extern u64 native_apic_icr_read(void);
 
-#define EIM_8BIT_APIC_ID	0
-#define EIM_32BIT_APIC_ID	1
+extern int x2apic_mode;
 
 #ifdef CONFIG_X86_X2APIC
 /*
@@ -166,10 +165,9 @@ static inline u64 native_x2apic_icr_read(void)
 	return val;
 }
 
-extern int x2apic, x2apic_phys;
+extern int x2apic_phys;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
-extern void enable_IR_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
 static inline int x2apic_enabled(void)
 {
@@ -183,6 +181,8 @@ static inline int x2apic_enabled(void)
 		return 1;
 	return 0;
 }
+
+#define x2apic_supported()	(cpu_has_x2apic)
 #else
 static inline void check_x2apic(void)
 {
@@ -190,28 +190,20 @@ static inline void check_x2apic(void)
 static inline void enable_x2apic(void)
 {
 }
-static inline void enable_IR_x2apic(void)
-{
-}
 static inline int x2apic_enabled(void)
 {
 	return 0;
 }
 
-#define	x2apic	0
-
+#define	x2apic_preenabled 0
+#define	x2apic_supported()	0
 #endif
 
-extern int get_physical_broadcast(void);
+extern void enable_IR_x2apic(void);
 
-#ifdef CONFIG_X86_X2APIC
-static inline void ack_x2APIC_irq(void)
-{
-	/* Docs say use 0 for future compatibility */
-	native_apic_msr_write(APIC_EOI, 0);
-}
-#endif
+extern int get_physical_broadcast(void);
 
+extern void apic_disable(void);
 extern int lapic_get_maxlvt(void);
 extern void clear_local_APIC(void);
 extern void connect_bsp_APIC(void);
@@ -252,7 +244,7 @@ static inline void lapic_shutdown(void) { }
 #define local_apic_timer_c2_ok		1
 static inline void init_apic_mappings(void) { }
 static inline void disable_local_APIC(void) { }
-
+static inline void apic_disable(void) { }
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_64
@@ -410,7 +402,7 @@ static inline unsigned default_get_apic_id(unsigned long x)
 {
 	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
 
-	if (APIC_XAPIC(ver))
+	if (APIC_XAPIC(ver) || boot_cpu_has(X86_FEATURE_EXTD_APICID))
 		return (x >> 24) & 0xFF;
 	else
 		return (x >> 24) & 0x0F;
@@ -478,6 +470,9 @@ static inline unsigned int read_apic_id(void)
 extern void default_setup_apic_routing(void);
 
 #ifdef CONFIG_X86_32
+
+extern struct apic apic_default;
+
 /*
  * Set up the logical destination ID.
  *
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index bc9514fb3b1..7ddb36ab933 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -22,6 +22,7 @@
 #  define	APIC_INTEGRATED(x)	(1)
 #endif
 #define		APIC_XAPIC(x)		((x) >= 0x14)
+#define		APIC_EXT_SPACE(x)	((x) & 0x80000000)
 #define	APIC_TASKPRI	0x80
 #define		APIC_TPRI_MASK		0xFFu
 #define	APIC_ARBPRI	0x90
@@ -116,7 +117,9 @@
 #define		APIC_TDR_DIV_32		0x8
 #define		APIC_TDR_DIV_64		0x9
 #define		APIC_TDR_DIV_128	0xA
-#define	APIC_EILVT0     0x500
+#define	APIC_EFEAT	0x400
+#define	APIC_ECTRL	0x410
+#define APIC_EILVTn(n)	(0x500 + 0x10 * n)
 #define		APIC_EILVT_NR_AMD_K8	1	/* # of extended interrupts */
 #define		APIC_EILVT_NR_AMD_10H	4
 #define		APIC_EILVT_LVTOFF(x)	(((x) >> 4) & 0xF)
@@ -125,9 +128,6 @@
 #define		APIC_EILVT_MSG_NMI	0x4
 #define		APIC_EILVT_MSG_EXT	0x7
 #define		APIC_EILVT_MASKED	(1 << 16)
-#define	APIC_EILVT1     0x510
-#define	APIC_EILVT2     0x520
-#define	APIC_EILVT3     0x530
 
 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
 #define APIC_BASE_MSR	0x800
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 85b46fba422..8cb9c814e12 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -247,5 +247,241 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+/* An 64bit atomic type */
+
+typedef struct {
+	unsigned long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(val)	{ (val) }
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ * Doesn't imply a read memory barrier.
+ */
+#define __atomic64_read(ptr)		((ptr)->counter)
+
+static inline unsigned long long
+cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
+{
+	asm volatile(
+
+		LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
+
+		     :		"=A" (old)
+
+		     : [ptr]	"D" (ptr),
+				"A" (old),
+				"b" (ll_low(new)),
+				"c" (ll_high(new))
+
+		     : "memory");
+
+	return old;
+}
+
+static inline unsigned long long
+atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
+		 unsigned long long new_val)
+{
+	return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ * @new_val:  value to assign
+ * @old_val:  old value that was there
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+
+static inline unsigned long long
+atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
+{
+	unsigned long long old_val;
+
+	do {
+		old_val = atomic_read(ptr);
+	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
+
+	return old_val;
+}
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ * @new_val:  value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
+{
+	atomic64_xchg(ptr, new_val);
+}
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ *
+ * Atomically reads the value of @ptr and returns it.
+ */
+static inline unsigned long long atomic64_read(atomic64_t *ptr)
+{
+	unsigned long long curr_val;
+
+	do {
+		curr_val = __atomic64_read(ptr);
+	} while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
+
+	return curr_val;
+}
+
+/**
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+static inline unsigned long long
+atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
+{
+	unsigned long long old_val, new_val;
+
+	do {
+		old_val = atomic_read(ptr);
+		new_val = old_val + delta;
+
+	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
+
+	return new_val;
+}
+
+static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
+{
+	return atomic64_add_return(-delta, ptr);
+}
+
+static inline long atomic64_inc_return(atomic64_t *ptr)
+{
+	return atomic64_add_return(1, ptr);
+}
+
+static inline long atomic64_dec_return(atomic64_t *ptr)
+{
+	return atomic64_sub_return(1, ptr);
+}
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
+{
+	atomic64_add_return(delta, ptr);
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
+{
+	atomic64_add(-delta, ptr);
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int
+atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
+{
+	unsigned long long old_val = atomic64_sub_return(delta, ptr);
+
+	return old_val == 0;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+static inline void atomic64_inc(atomic64_t *ptr)
+{
+	atomic64_add(1, ptr);
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+static inline void atomic64_dec(atomic64_t *ptr)
+{
+	atomic64_sub(1, ptr);
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic64_dec_and_test(atomic64_t *ptr)
+{
+	return atomic64_sub_and_test(1, ptr);
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_inc_and_test(atomic64_t *ptr)
+{
+	return atomic64_sub_and_test(-1, ptr);
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int
+atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
+{
+	long long old_val = atomic64_add_return(delta, ptr);
+
+	return old_val < 0;
+}
+
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 8c21731984d..0d636022000 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -455,5 +455,5 @@ static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_64_H */
diff --git a/arch/x86/include/asm/bitsperlong.h b/arch/x86/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..b0ae1c4dc79
--- /dev/null
+++ b/arch/x86/include/asm/bitsperlong.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_X86_BITSPERLONG_H
+#define __ASM_X86_BITSPERLONG_H
+
+#ifdef __x86_64__
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_X86_BITSPERLONG_H */
+
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 6ba23dd9fc9..418e632d4a8 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,11 +8,26 @@
 
 #ifdef __KERNEL__
 
+#include <asm/page_types.h>
+
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
 				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
+/* Minimum kernel alignment, as a power of two */
+#ifdef CONFIG_x86_64
+#define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
+#else
+#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
+#endif
+#define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
+
+#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
+	(CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
+#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+#endif
+
 #ifdef CONFIG_KERNEL_BZIP2
 #define BOOT_HEAP_SIZE             0x400000
 #else /* !CONFIG_KERNEL_BZIP2 */
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 433adaebf9b..1724e8de317 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -50,7 +50,8 @@ struct setup_header {
 	__u32	ramdisk_size;
 	__u32	bootsect_kludge;
 	__u16	heap_end_ptr;
-	__u16	_pad1;
+	__u8	ext_loader_ver;
+	__u8	ext_loader_type;
 	__u32	cmd_line_ptr;
 	__u32	initrd_addr_max;
 	__u32	kernel_alignment;
diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h
index 222802029fa..d96c1ee3a95 100644
--- a/arch/x86/include/asm/cpu_debug.h
+++ b/arch/x86/include/asm/cpu_debug.h
@@ -86,105 +86,7 @@ enum cpu_file_bit {
 	CPU_VALUE_BIT,				/* value		*/
 };
 
-#define	CPU_FILE_VALUE			(1 << CPU_VALUE_BIT)
-
-/*
- * DisplayFamily_DisplayModel	Processor Families/Processor Number Series
- * --------------------------	------------------------------------------
- * 05_01, 05_02, 05_04		Pentium, Pentium with MMX
- *
- * 06_01			Pentium Pro
- * 06_03, 06_05			Pentium II Xeon, Pentium II
- * 06_07, 06_08, 06_0A, 06_0B	Pentium III Xeon, Pentum III
- *
- * 06_09, 060D			Pentium M
- *
- * 06_0E			Core Duo, Core Solo
- *
- * 06_0F			Xeon 3000, 3200, 5100, 5300, 7300 series,
- *				Core 2 Quad, Core 2 Extreme, Core 2 Duo,
- *				Pentium dual-core
- * 06_17			Xeon 5200, 5400 series, Core 2 Quad Q9650
- *
- * 06_1C			Atom
- *
- * 0F_00, 0F_01, 0F_02		Xeon, Xeon MP, Pentium 4
- * 0F_03, 0F_04			Xeon, Xeon MP, Pentium 4, Pentium D
- *
- * 0F_06			Xeon 7100, 5000 Series, Xeon MP,
- *				Pentium 4, Pentium D
- */
-
-/* Register processors bits */
-enum cpu_processor_bit {
-	CPU_NONE,
-/* Intel */
-	CPU_INTEL_PENTIUM_BIT,
-	CPU_INTEL_P6_BIT,
-	CPU_INTEL_PENTIUM_M_BIT,
-	CPU_INTEL_CORE_BIT,
-	CPU_INTEL_CORE2_BIT,
-	CPU_INTEL_ATOM_BIT,
-	CPU_INTEL_XEON_P4_BIT,
-	CPU_INTEL_XEON_MP_BIT,
-/* AMD */
-	CPU_AMD_K6_BIT,
-	CPU_AMD_K7_BIT,
-	CPU_AMD_K8_BIT,
-	CPU_AMD_0F_BIT,
-	CPU_AMD_10_BIT,
-	CPU_AMD_11_BIT,
-};
-
-#define	CPU_INTEL_PENTIUM	(1 << CPU_INTEL_PENTIUM_BIT)
-#define	CPU_INTEL_P6		(1 << CPU_INTEL_P6_BIT)
-#define	CPU_INTEL_PENTIUM_M	(1 << CPU_INTEL_PENTIUM_M_BIT)
-#define	CPU_INTEL_CORE		(1 << CPU_INTEL_CORE_BIT)
-#define	CPU_INTEL_CORE2		(1 << CPU_INTEL_CORE2_BIT)
-#define	CPU_INTEL_ATOM		(1 << CPU_INTEL_ATOM_BIT)
-#define	CPU_INTEL_XEON_P4	(1 << CPU_INTEL_XEON_P4_BIT)
-#define	CPU_INTEL_XEON_MP	(1 << CPU_INTEL_XEON_MP_BIT)
-
-#define	CPU_INTEL_PX		(CPU_INTEL_P6 | CPU_INTEL_PENTIUM_M)
-#define	CPU_INTEL_COREX		(CPU_INTEL_CORE | CPU_INTEL_CORE2)
-#define	CPU_INTEL_XEON		(CPU_INTEL_XEON_P4 | CPU_INTEL_XEON_MP)
-#define	CPU_CO_AT		(CPU_INTEL_CORE | CPU_INTEL_ATOM)
-#define	CPU_C2_AT		(CPU_INTEL_CORE2 | CPU_INTEL_ATOM)
-#define	CPU_CX_AT		(CPU_INTEL_COREX | CPU_INTEL_ATOM)
-#define	CPU_CX_XE		(CPU_INTEL_COREX | CPU_INTEL_XEON)
-#define	CPU_P6_XE		(CPU_INTEL_P6 | CPU_INTEL_XEON)
-#define	CPU_PM_CO_AT		(CPU_INTEL_PENTIUM_M | CPU_CO_AT)
-#define	CPU_C2_AT_XE		(CPU_C2_AT | CPU_INTEL_XEON)
-#define	CPU_CX_AT_XE		(CPU_CX_AT | CPU_INTEL_XEON)
-#define	CPU_P6_CX_AT		(CPU_INTEL_P6 | CPU_CX_AT)
-#define	CPU_P6_CX_XE		(CPU_P6_XE | CPU_INTEL_COREX)
-#define	CPU_P6_CX_AT_XE		(CPU_INTEL_P6 | CPU_CX_AT_XE)
-#define	CPU_PM_CX_AT_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_AT_XE)
-#define	CPU_PM_CX_AT		(CPU_INTEL_PENTIUM_M | CPU_CX_AT)
-#define	CPU_PM_CX_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_XE)
-#define	CPU_PX_CX_AT		(CPU_INTEL_PX | CPU_CX_AT)
-#define	CPU_PX_CX_AT_XE		(CPU_INTEL_PX | CPU_CX_AT_XE)
-
-/* Select all supported Intel CPUs */
-#define	CPU_INTEL_ALL		(CPU_INTEL_PENTIUM | CPU_PX_CX_AT_XE)
-
-#define	CPU_AMD_K6		(1 << CPU_AMD_K6_BIT)
-#define	CPU_AMD_K7		(1 << CPU_AMD_K7_BIT)
-#define	CPU_AMD_K8		(1 << CPU_AMD_K8_BIT)
-#define	CPU_AMD_0F		(1 << CPU_AMD_0F_BIT)
-#define	CPU_AMD_10		(1 << CPU_AMD_10_BIT)
-#define	CPU_AMD_11		(1 << CPU_AMD_11_BIT)
-
-#define	CPU_K10_PLUS		(CPU_AMD_10 | CPU_AMD_11)
-#define	CPU_K0F_PLUS		(CPU_AMD_0F | CPU_K10_PLUS)
-#define	CPU_K8_PLUS		(CPU_AMD_K8 | CPU_K0F_PLUS)
-#define	CPU_K7_PLUS		(CPU_AMD_K7 | CPU_K8_PLUS)
-
-/* Select all supported AMD CPUs */
-#define	CPU_AMD_ALL		(CPU_AMD_K6 | CPU_K7_PLUS)
-
-/* Select all supported CPUs */
-#define	CPU_ALL			(CPU_INTEL_ALL | CPU_AMD_ALL)
+#define	CPU_FILE_VALUE		(1 << CPU_VALUE_BIT)
 
 #define MAX_CPU_FILES		512
 
@@ -220,7 +122,6 @@ struct cpu_debug_range {
 	unsigned		min;		/* Register range min	*/
 	unsigned		max;		/* Register range max	*/
 	unsigned		flag;		/* Supported flags	*/
-	unsigned		model;		/* Supported models	*/
 };
 
 #endif /* _ASM_X86_CPU_DEBUG_H */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index bb83b1c397a..4a28d22d479 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -22,7 +22,7 @@
 #define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
 #define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers */
 #define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Exception */
 #define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
 #define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
 #define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
@@ -94,6 +94,7 @@
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
 #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
+#define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
@@ -115,6 +116,8 @@
 #define X86_FEATURE_XMM4_1	(4*32+19) /* "sse4_1" SSE-4.1 */
 #define X86_FEATURE_XMM4_2	(4*32+20) /* "sse4_2" SSE-4.2 */
 #define X86_FEATURE_X2APIC	(4*32+21) /* x2APIC */
+#define X86_FEATURE_MOVBE	(4*32+22) /* MOVBE instruction */
+#define X86_FEATURE_POPCNT      (4*32+23) /* POPCNT instruction */
 #define X86_FEATURE_AES		(4*32+25) /* AES instructions */
 #define X86_FEATURE_XSAVE	(4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
 #define X86_FEATURE_OSXSAVE	(4*32+27) /* "" XSAVE enabled in the OS */
@@ -192,11 +195,11 @@ extern const char * const x86_power_flags[32];
 #define clear_cpu_cap(c, bit)	clear_bit(bit, (unsigned long *)((c)->x86_capability))
 #define setup_clear_cpu_cap(bit) do { \
 	clear_cpu_cap(&boot_cpu_data, bit);	\
-	set_bit(bit, (unsigned long *)cleared_cpu_caps); \
+	set_bit(bit, (unsigned long *)cpu_caps_cleared); \
 } while (0)
 #define setup_force_cpu_cap(bit) do { \
 	set_cpu_cap(&boot_cpu_data, bit);	\
-	clear_bit(bit, (unsigned long *)cleared_cpu_caps);	\
+	set_bit(bit, (unsigned long *)cpu_caps_set);	\
 } while (0)
 
 #define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h
index a8f672ba100..70dac199b09 100644
--- a/arch/x86/include/asm/ds.h
+++ b/arch/x86/include/asm/ds.h
@@ -15,8 +15,8 @@
  * - buffer allocation (memory accounting)
  *
  *
- * Copyright (C) 2007-2008 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
+ * Copyright (C) 2007-2009 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
  */
 
 #ifndef _ASM_X86_DS_H
@@ -83,8 +83,10 @@ enum ds_feature {
  * The interrupt threshold is independent from the overflow callback
  * to allow users to use their own overflow interrupt handling mechanism.
  *
- * task: the task to request recording for;
- *       NULL for per-cpu recording on the current cpu
+ * The function might sleep.
+ *
+ * task: the task to request recording for
+ * cpu:  the cpu to request recording for
  * base: the base pointer for the (non-pageable) buffer;
  * size: the size of the provided buffer in bytes
  * ovfl: pointer to a function to be called on buffer overflow;
@@ -93,19 +95,28 @@ enum ds_feature {
  *     -1 if no interrupt threshold is requested.
  * flags: a bit-mask of the above flags
  */
-extern struct bts_tracer *ds_request_bts(struct task_struct *task,
-					 void *base, size_t size,
-					 bts_ovfl_callback_t ovfl,
-					 size_t th, unsigned int flags);
-extern struct pebs_tracer *ds_request_pebs(struct task_struct *task,
-					   void *base, size_t size,
-					   pebs_ovfl_callback_t ovfl,
-					   size_t th, unsigned int flags);
+extern struct bts_tracer *ds_request_bts_task(struct task_struct *task,
+					      void *base, size_t size,
+					      bts_ovfl_callback_t ovfl,
+					      size_t th, unsigned int flags);
+extern struct bts_tracer *ds_request_bts_cpu(int cpu, void *base, size_t size,
+					     bts_ovfl_callback_t ovfl,
+					     size_t th, unsigned int flags);
+extern struct pebs_tracer *ds_request_pebs_task(struct task_struct *task,
+						void *base, size_t size,
+						pebs_ovfl_callback_t ovfl,
+						size_t th, unsigned int flags);
+extern struct pebs_tracer *ds_request_pebs_cpu(int cpu,
+					       void *base, size_t size,
+					       pebs_ovfl_callback_t ovfl,
+					       size_t th, unsigned int flags);
 
 /*
  * Release BTS or PEBS resources
  * Suspend and resume BTS or PEBS tracing
  *
+ * Must be called with irq's enabled.
+ *
  * tracer: the tracer handle returned from ds_request_~()
  */
 extern void ds_release_bts(struct bts_tracer *tracer);
@@ -115,6 +126,28 @@ extern void ds_release_pebs(struct pebs_tracer *tracer);
 extern void ds_suspend_pebs(struct pebs_tracer *tracer);
 extern void ds_resume_pebs(struct pebs_tracer *tracer);
 
+/*
+ * Release BTS or PEBS resources
+ * Suspend and resume BTS or PEBS tracing
+ *
+ * Cpu tracers must call this on the traced cpu.
+ * Task tracers must call ds_release_~_noirq() for themselves.
+ *
+ * May be called with irq's disabled.
+ *
+ * Returns 0 if successful;
+ * -EPERM if the cpu tracer does not trace the current cpu.
+ * -EPERM if the task tracer does not trace itself.
+ *
+ * tracer: the tracer handle returned from ds_request_~()
+ */
+extern int ds_release_bts_noirq(struct bts_tracer *tracer);
+extern int ds_suspend_bts_noirq(struct bts_tracer *tracer);
+extern int ds_resume_bts_noirq(struct bts_tracer *tracer);
+extern int ds_release_pebs_noirq(struct pebs_tracer *tracer);
+extern int ds_suspend_pebs_noirq(struct pebs_tracer *tracer);
+extern int ds_resume_pebs_noirq(struct pebs_tracer *tracer);
+
 
 /*
  * The raw DS buffer state as it is used for BTS and PEBS recording.
@@ -170,9 +203,9 @@ struct bts_struct {
 		} lbr;
 		/* BTS_TASK_ARRIVES or BTS_TASK_DEPARTS */
 		struct {
-			__u64 jiffies;
+			__u64 clock;
 			pid_t pid;
-		} timestamp;
+		} event;
 	} variant;
 };
 
@@ -201,8 +234,12 @@ struct bts_trace {
 struct pebs_trace {
 	struct ds_trace ds;
 
-	/* the PEBS reset value */
-	unsigned long long reset_value;
+	/* the number of valid counters in the below array */
+	unsigned int counters;
+
+#define MAX_PEBS_COUNTERS 4
+	/* the counter reset value */
+	unsigned long long counter_reset[MAX_PEBS_COUNTERS];
 };
 
 
@@ -237,9 +274,11 @@ extern int ds_reset_pebs(struct pebs_tracer *tracer);
  * Returns 0 on success; -Eerrno on error
  *
  * tracer: the tracer handle returned from ds_request_pebs()
+ * counter: the index of the counter
  * value: the new counter reset value
  */
-extern int ds_set_pebs_reset(struct pebs_tracer *tracer, u64 value);
+extern int ds_set_pebs_reset(struct pebs_tracer *tracer,
+			     unsigned int counter, u64 value);
 
 /*
  * Initialization
@@ -252,21 +291,12 @@ extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
  */
 extern void ds_switch_to(struct task_struct *prev, struct task_struct *next);
 
-/*
- * Task clone/init and cleanup work
- */
-extern void ds_copy_thread(struct task_struct *tsk, struct task_struct *father);
-extern void ds_exit_thread(struct task_struct *tsk);
-
 #else /* CONFIG_X86_DS */
 
 struct cpuinfo_x86;
 static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
 static inline void ds_switch_to(struct task_struct *prev,
 				struct task_struct *next) {}
-static inline void ds_copy_thread(struct task_struct *tsk,
-				  struct task_struct *father) {}
-static inline void ds_exit_thread(struct task_struct *tsk) {}
 
 #endif /* CONFIG_X86_DS */
 #endif /* _ASM_X86_DS_H */
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index c2e6bedaf25..ff8cbfa0785 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -14,6 +14,7 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
 BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
 BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
 BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+BUILD_INTERRUPT(reboot_interrupt,REBOOT_VECTOR)
 
 BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
 		 smp_invalidate_interrupt)
@@ -49,11 +50,19 @@ BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
 BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
 
 #ifdef CONFIG_PERF_COUNTERS
-BUILD_INTERRUPT(perf_counter_interrupt, LOCAL_PERF_VECTOR)
+BUILD_INTERRUPT(perf_pending_interrupt, LOCAL_PENDING_VECTOR)
 #endif
 
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_THERMAL_VECTOR
 BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
 #endif
 
+#ifdef CONFIG_X86_MCE_THRESHOLD
+BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
+#endif
+
+#ifdef CONFIG_X86_NEW_MCE
+BUILD_INTERRUPT(mce_self_interrupt,MCE_SELF_VECTOR)
+#endif
+
 #endif
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 37555e52f98..82e3e8f0104 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -13,6 +13,8 @@ typedef struct {
 	unsigned int irq_spurious_count;
 #endif
 	unsigned int generic_irqs;	/* arch dependent */
+	unsigned int apic_perf_irqs;
+	unsigned int apic_pending_irqs;
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
 	unsigned int irq_call_count;
@@ -20,7 +22,7 @@ typedef struct {
 #endif
 #ifdef CONFIG_X86_MCE
 	unsigned int irq_thermal_count;
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
 	unsigned int irq_threshold_count;
 # endif
 #endif
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index b762ea49bd7..ba180d93b08 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -29,9 +29,12 @@
 extern void apic_timer_interrupt(void);
 extern void generic_interrupt(void);
 extern void error_interrupt(void);
+extern void perf_pending_interrupt(void);
+
 extern void spurious_interrupt(void);
 extern void thermal_interrupt(void);
 extern void reschedule_interrupt(void);
+extern void mce_self_interrupt(void);
 
 extern void invalidate_interrupt(void);
 extern void invalidate_interrupt0(void);
@@ -44,6 +47,7 @@ extern void invalidate_interrupt6(void);
 extern void invalidate_interrupt7(void);
 
 extern void irq_move_cleanup_interrupt(void);
+extern void reboot_interrupt(void);
 extern void threshold_interrupt(void);
 
 extern void call_function_interrupt(void);
@@ -63,7 +67,26 @@ extern unsigned long io_apic_irqs;
 extern void init_VISWS_APIC_irqs(void);
 extern void setup_IO_APIC(void);
 extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+
+struct io_apic_irq_attr {
+	int ioapic;
+	int ioapic_pin;
+	int trigger;
+	int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+					int ioapic, int ioapic_pin,
+					int trigger, int polarity)
+{
+	irq_attr->ioapic     = ioapic;
+	irq_attr->ioapic_pin = ioapic_pin;
+	irq_attr->trigger    = trigger;
+	irq_attr->polarity   = polarity;
+}
+
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+					struct io_apic_irq_attr *irq_attr);
 extern void setup_ioapic_dest(void);
 
 extern void enable_IO_APIC(void);
@@ -78,7 +101,11 @@ extern void eisa_set_level_irq(unsigned int irq);
 /* SMP */
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_generic_interrupt(struct pt_regs *);
 extern void smp_error_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_IO_APIC
+extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
+#endif
 #ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(struct pt_regs *);
 extern void smp_call_function_interrupt(struct pt_regs *);
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 71c9e518398..175adf58dd4 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -67,7 +67,7 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 		     ".previous\n"
 		     _ASM_EXTABLE(1b, 3b)
 		     : [err] "=r" (err)
-#if 0 /* See comment in __save_init_fpu() below. */
+#if 0 /* See comment in fxsave() below. */
 		     : [fx] "r" (fx), "m" (*fx), "0" (0));
 #else
 		     : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
@@ -75,14 +75,6 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 	return err;
 }
 
-static inline int restore_fpu_checking(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_XSAVE)
-		return xrstor_checking(&tsk->thread.xstate->xsave);
-	else
-		return fxrstor_checking(&tsk->thread.xstate->fxsave);
-}
-
 /* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
    is pending. Clear the x87 state here by setting it to fixed
    values. The kernel data segment can be sometimes 0 and sometimes
@@ -120,7 +112,7 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 		     ".previous\n"
 		     _ASM_EXTABLE(1b, 3b)
 		     : [err] "=r" (err), "=m" (*fx)
-#if 0 /* See comment in __fxsave_clear() below. */
+#if 0 /* See comment in fxsave() below. */
 		     : [fx] "r" (fx), "0" (0));
 #else
 		     : [fx] "cdaSDb" (fx), "0" (0));
@@ -185,12 +177,9 @@ static inline void tolerant_fwait(void)
 	asm volatile("fnclex ; fwait");
 }
 
-static inline void restore_fpu(struct task_struct *tsk)
+/* perform fxrstor iff the processor has extended states, otherwise frstor */
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 {
-	if (task_thread_info(tsk)->status & TS_XSAVE) {
-		xrstor_checking(&tsk->thread.xstate->xsave);
-		return;
-	}
 	/*
 	 * The "nop" is needed to make the instructions the same
 	 * length.
@@ -199,7 +188,9 @@ static inline void restore_fpu(struct task_struct *tsk)
 		"nop ; frstor %1",
 		"fxrstor %1",
 		X86_FEATURE_FXSR,
-		"m" (tsk->thread.xstate->fxsave));
+		"m" (*fx));
+
+	return 0;
 }
 
 /* We need a safe address that is cheap to find and that is already
@@ -262,6 +253,14 @@ end:
 
 #endif	/* CONFIG_X86_64 */
 
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		return xrstor_checking(&tsk->thread.xstate->xsave);
+	else
+		return fxrstor_checking(&tsk->thread.xstate->fxsave);
+}
+
 /*
  * Signal frame handlers...
  */
@@ -305,18 +304,18 @@ static inline void kernel_fpu_end(void)
 /*
  * Some instructions like VIA's padlock instructions generate a spurious
  * DNA fault but don't modify SSE registers. And these instructions
- * get used from interrupt context aswell. To prevent these kernel instructions
- * in interrupt context interact wrongly with other user/kernel fpu usage, we
+ * get used from interrupt context as well. To prevent these kernel instructions
+ * in interrupt context interacting wrongly with other user/kernel fpu usage, we
  * should use them only in the context of irq_ts_save/restore()
  */
 static inline int irq_ts_save(void)
 {
 	/*
-	 * If we are in process context, we are ok to take a spurious DNA fault.
-	 * Otherwise, doing clts() in process context require pre-emption to
-	 * be disabled or some heavy lifting like kernel_fpu_begin()
+	 * If in process context and not atomic, we can take a spurious DNA fault.
+	 * Otherwise, doing clts() in process context requires disabling preemption
+	 * or some heavy lifting like kernel_fpu_begin()
 	 */
-	if (!in_interrupt())
+	if (!in_atomic())
 		return 0;
 
 	if (read_cr0() & X86_CR0_TS) {
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
index 1a99e6c092a..58d7091eeb1 100644
--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -60,8 +60,4 @@ extern struct irq_chip i8259A_chip;
 extern void mask_8259A(void);
 extern void unmask_8259A(void);
 
-#ifdef CONFIG_X86_32
-extern void init_ISA_irqs(void);
-#endif
-
 #endif /* _ASM_X86_I8259_H */
diff --git a/arch/x86/include/asm/intel_arch_perfmon.h b/arch/x86/include/asm/intel_arch_perfmon.h
deleted file mode 100644
index fa0fd068bc2..00000000000
--- a/arch/x86/include/asm/intel_arch_perfmon.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASM_X86_INTEL_ARCH_PERFMON_H
-#define _ASM_X86_INTEL_ARCH_PERFMON_H
-
-#define MSR_ARCH_PERFMON_PERFCTR0		0xc1
-#define MSR_ARCH_PERFMON_PERFCTR1		0xc2
-
-#define MSR_ARCH_PERFMON_EVENTSEL0		0x186
-#define MSR_ARCH_PERFMON_EVENTSEL1		0x187
-
-#define ARCH_PERFMON_EVENTSEL0_ENABLE	(1 << 22)
-#define ARCH_PERFMON_EVENTSEL_INT	(1 << 20)
-#define ARCH_PERFMON_EVENTSEL_OS	(1 << 17)
-#define ARCH_PERFMON_EVENTSEL_USR	(1 << 16)
-
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL	(0x3c)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK	(0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX (0)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
-	(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
-
-union cpuid10_eax {
-	struct {
-		unsigned int version_id:8;
-		unsigned int num_counters:8;
-		unsigned int bit_width:8;
-		unsigned int mask_length:8;
-	} split;
-	unsigned int full;
-};
-
-#endif /* _ASM_X86_INTEL_ARCH_PERFMON_H */
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 9d826e43601..daf866ed061 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -154,22 +154,19 @@ extern int timer_through_8259;
 extern int io_apic_get_unique_id(int ioapic, int apic_id);
 extern int io_apic_get_version(int ioapic);
 extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
-				   int edge_level, int active_high_low);
 #endif /* CONFIG_ACPI */
 
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+		 struct io_apic_irq_attr *irq_attr);
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
 extern void ioapic_init_mappings(void);
 
-#ifdef CONFIG_X86_64
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
 extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
 extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
 extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
 extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
-extern void reinit_intr_remapped_IO_APIC(int intr_remapping,
-	struct IO_APIC_route_entry **ioapic_entries);
-#endif
 
 extern void probe_nr_irqs_gsi(void);
 
diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index 86af26091d6..0e9fe1d9d97 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_X86_IOMAP_H
+#define _ASM_X86_IOMAP_H
+
 /*
  * Copyright © 2008 Ingo Molnar
  *
@@ -31,3 +34,5 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 
 void
 iounmap_atomic(void *kvaddr, enum km_type type);
+
+#endif /* _ASM_X86_IOMAP_H */
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 0396760fccb..f275e224450 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -1,6 +1,6 @@
 #ifndef _ASM_X86_IRQ_REMAPPING_H
 #define _ASM_X86_IRQ_REMAPPING_H
 
-#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
 
 #endif	/* _ASM_X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 3cbd79bbb47..5b21f0ec3df 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -25,6 +25,7 @@
  */
 
 #define NMI_VECTOR			0x02
+#define MCE_VECTOR			0x12
 
 /*
  * IDT vectors usable for external interrupt sources start
@@ -34,6 +35,7 @@
 
 #ifdef CONFIG_X86_32
 # define SYSCALL_VECTOR			0x80
+# define IA32_SYSCALL_VECTOR		0x80
 #else
 # define IA32_SYSCALL_VECTOR		0x80
 #endif
@@ -86,13 +88,8 @@
 #define CALL_FUNCTION_VECTOR		0xfc
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
-
-#ifdef CONFIG_X86_32
-/* 0xf8 - 0xf9 : free */
-#else
-# define THRESHOLD_APIC_VECTOR		0xf9
-# define UV_BAU_MESSAGE			0xf8
-#endif
+#define THRESHOLD_APIC_VECTOR		0xf9
+#define REBOOT_VECTOR			0xf8
 
 /* f0-f7 used for spreading out TLB flushes: */
 #define INVALIDATE_TLB_VECTOR_END	0xf7
@@ -107,14 +104,21 @@
 #define LOCAL_TIMER_VECTOR		0xef
 
 /*
- * Performance monitoring interrupt vector:
+ * Generic system vector for platform specific use
  */
-#define LOCAL_PERF_VECTOR		0xee
+#define GENERIC_INTERRUPT_VECTOR	0xed
 
 /*
- * Generic system vector for platform specific use
+ * Performance monitoring pending work vector:
  */
-#define GENERIC_INTERRUPT_VECTOR	0xed
+#define LOCAL_PENDING_VECTOR		0xec
+
+#define UV_BAU_MESSAGE			0xec
+
+/*
+ * Self IPI vector for machine checks
+ */
+#define MCE_SELF_VECTOR			0xeb
 
 /*
  * First APIC vector available to drivers: (vectors 0x30-0xee) we
diff --git a/arch/x86/include/asm/k8.h b/arch/x86/include/asm/k8.h
index 54c8cc53b24..c2d1f3b58e5 100644
--- a/arch/x86/include/asm/k8.h
+++ b/arch/x86/include/asm/k8.h
@@ -12,4 +12,17 @@ extern int cache_k8_northbridges(void);
 extern void k8_flush_garts(void);
 extern int k8_scan_nodes(unsigned long start, unsigned long end);
 
+#ifdef CONFIG_K8_NB
+static inline struct pci_dev *node_to_k8_nb_misc(int node)
+{
+	return (node < num_k8_northbridges) ? k8_northbridges[node] : NULL;
+}
+#else
+static inline struct pci_dev *node_to_k8_nb_misc(int node)
+{
+	return NULL;
+}
+#endif
+
+
 #endif /* _ASM_X86_K8_H */
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index dc3f6cf1170..125be8b1956 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -16,6 +16,7 @@
 #define __KVM_HAVE_MSI
 #define __KVM_HAVE_USER_NMI
 #define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_MSIX
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index f0faf58044f..eabdc1cfab5 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -185,6 +185,7 @@ union kvm_mmu_page_role {
 		unsigned access:3;
 		unsigned invalid:1;
 		unsigned cr4_pge:1;
+		unsigned nxe:1;
 	};
 };
 
@@ -212,7 +213,6 @@ struct kvm_mmu_page {
 	int multimapped;         /* More than one parent_pte? */
 	int root_count;          /* Currently serving as active root */
 	bool unsync;
-	bool global;
 	unsigned int unsync_children;
 	union {
 		u64 *parent_pte;               /* !multimapped */
@@ -261,13 +261,11 @@ struct kvm_mmu {
 	union kvm_mmu_page_role base_role;
 
 	u64 *pae_root;
+	u64 rsvd_bits_mask[2][4];
 };
 
 struct kvm_vcpu_arch {
 	u64 host_tsc;
-	int interrupt_window_open;
-	unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
-	DECLARE_BITMAP(irq_pending, KVM_NR_INTERRUPTS);
 	/*
 	 * rip and regs accesses must go through
 	 * kvm_{register,rip}_{read,write} functions.
@@ -286,6 +284,7 @@ struct kvm_vcpu_arch {
 	u64 shadow_efer;
 	u64 apic_base;
 	struct kvm_lapic *apic;    /* kernel irqchip context */
+	int32_t apic_arb_prio;
 	int mp_state;
 	int sipi_vector;
 	u64 ia32_misc_enable_msr;
@@ -320,6 +319,8 @@ struct kvm_vcpu_arch {
 	struct kvm_pio_request pio;
 	void *pio_data;
 
+	u8 event_exit_inst_len;
+
 	struct kvm_queued_exception {
 		bool pending;
 		bool has_error_code;
@@ -329,11 +330,12 @@ struct kvm_vcpu_arch {
 
 	struct kvm_queued_interrupt {
 		bool pending;
+		bool soft;
 		u8 nr;
 	} interrupt;
 
 	struct {
-		int active;
+		int vm86_active;
 		u8 save_iopl;
 		struct kvm_save_segment {
 			u16 selector;
@@ -356,9 +358,9 @@ struct kvm_vcpu_arch {
 	unsigned int time_offset;
 	struct page *time_page;
 
+	bool singlestep; /* guest is single stepped by KVM */
 	bool nmi_pending;
 	bool nmi_injected;
-	bool nmi_window_open;
 
 	struct mtrr_state_type mtrr_state;
 	u32 pat;
@@ -392,15 +394,14 @@ struct kvm_arch{
 	 */
 	struct list_head active_mmu_pages;
 	struct list_head assigned_dev_head;
-	struct list_head oos_global_pages;
 	struct iommu_domain *iommu_domain;
+	int iommu_flags;
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
 	struct hlist_head irq_ack_notifier_list;
 	int vapics_in_nmi_mode;
 
-	int round_robin_prev_vcpu;
 	unsigned int tss_addr;
 	struct page *apic_access_page;
 
@@ -423,7 +424,6 @@ struct kvm_vm_stat {
 	u32 mmu_recycled;
 	u32 mmu_cache_miss;
 	u32 mmu_unsync;
-	u32 mmu_unsync_global;
 	u32 remote_tlb_flush;
 	u32 lpages;
 };
@@ -443,7 +443,6 @@ struct kvm_vcpu_stat {
 	u32 halt_exits;
 	u32 halt_wakeup;
 	u32 request_irq_exits;
-	u32 request_nmi_exits;
 	u32 irq_exits;
 	u32 host_state_reload;
 	u32 efer_reload;
@@ -511,20 +510,22 @@ struct kvm_x86_ops {
 	void (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
 	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
 	void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
+	void (*set_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
+	u32 (*get_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
 	void (*patch_hypercall)(struct kvm_vcpu *vcpu,
 				unsigned char *hypercall_addr);
-	int (*get_irq)(struct kvm_vcpu *vcpu);
-	void (*set_irq)(struct kvm_vcpu *vcpu, int vec);
+	void (*set_irq)(struct kvm_vcpu *vcpu);
+	void (*set_nmi)(struct kvm_vcpu *vcpu);
 	void (*queue_exception)(struct kvm_vcpu *vcpu, unsigned nr,
 				bool has_error_code, u32 error_code);
-	bool (*exception_injected)(struct kvm_vcpu *vcpu);
-	void (*inject_pending_irq)(struct kvm_vcpu *vcpu);
-	void (*inject_pending_vectors)(struct kvm_vcpu *vcpu,
-				       struct kvm_run *run);
-
+	int (*interrupt_allowed)(struct kvm_vcpu *vcpu);
+	int (*nmi_allowed)(struct kvm_vcpu *vcpu);
+	void (*enable_nmi_window)(struct kvm_vcpu *vcpu);
+	void (*enable_irq_window)(struct kvm_vcpu *vcpu);
+	void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*get_tdp_level)(void);
-	int (*get_mt_mask_shift)(void);
+	u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
 };
 
 extern struct kvm_x86_ops *kvm_x86_ops;
@@ -538,7 +539,7 @@ int kvm_mmu_setup(struct kvm_vcpu *vcpu);
 void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte);
 void kvm_mmu_set_base_ptes(u64 base_pte);
 void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
-		u64 dirty_mask, u64 nx_mask, u64 x_mask, u64 mt_mask);
+		u64 dirty_mask, u64 nx_mask, u64 x_mask);
 
 int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
 void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
@@ -552,6 +553,7 @@ int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
 			  const void *val, int bytes);
 int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes,
 		  gpa_t addr, unsigned long *ret);
+u8 kvm_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn);
 
 extern bool tdp_enabled;
 
@@ -563,6 +565,7 @@ enum emulation_result {
 
 #define EMULTYPE_NO_DECODE	    (1 << 0)
 #define EMULTYPE_TRAP_UD	    (1 << 1)
+#define EMULTYPE_SKIP		    (1 << 2)
 int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
 			unsigned long cr2, u16 error_code, int emulation_type);
 void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
@@ -638,7 +641,6 @@ void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
 int kvm_mmu_load(struct kvm_vcpu *vcpu);
 void kvm_mmu_unload(struct kvm_vcpu *vcpu);
 void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu);
-void kvm_mmu_sync_global(struct kvm_vcpu *vcpu);
 
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
 
@@ -769,6 +771,8 @@ enum {
 #define HF_GIF_MASK		(1 << 0)
 #define HF_HIF_MASK		(1 << 1)
 #define HF_VINTR_MASK		(1 << 2)
+#define HF_NMI_MASK		(1 << 3)
+#define HF_IRET_MASK		(1 << 4)
 
 /*
  * Hardware virtualization extension instructions may fault if a
@@ -791,5 +795,6 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
 
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/kvm_x86_emulate.h b/arch/x86/include/asm/kvm_x86_emulate.h
index 6a159732881..b7ed2c42311 100644
--- a/arch/x86/include/asm/kvm_x86_emulate.h
+++ b/arch/x86/include/asm/kvm_x86_emulate.h
@@ -143,6 +143,9 @@ struct decode_cache {
 	struct fetch_cache fetch;
 };
 
+#define X86_SHADOW_INT_MOV_SS  1
+#define X86_SHADOW_INT_STI     2
+
 struct x86_emulate_ctxt {
 	/* Register state before/after emulation. */
 	struct kvm_vcpu *vcpu;
@@ -152,6 +155,9 @@ struct x86_emulate_ctxt {
 	int mode;
 	u32 cs_base;
 
+	/* interruptibility state, as a result of execution of STI or MOV SS */
+	int interruptibility;
+
 	/* decode cache */
 	struct decode_cache decode;
 };
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 1caf57628b9..313389cd50d 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,13 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M for ease of mapping into the guest (one PTE page). */
+/* We map at -4M (-2M when PAE is activated) for ease of mapping
+ * into the guest (one PTE page). */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_ADDR 0xFFE00000
+#else
 #define SWITCHER_ADDR 0xFFC00000
+#endif
 
 /* Found in switcher.S */
 extern unsigned long default_idt_entries[];
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index faae1996487..d31c4a68407 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -12,11 +12,13 @@
 #define LHCALL_TS		8
 #define LHCALL_SET_CLOCKEVENT	9
 #define LHCALL_HALT		10
+#define LHCALL_SET_PMD		13
 #define LHCALL_SET_PTE		14
-#define LHCALL_SET_PMD		15
+#define LHCALL_SET_PGD		15
 #define LHCALL_LOAD_TLS		16
 #define LHCALL_NOTIFY		17
 #define LHCALL_LOAD_GDT_ENTRY	18
+#define LHCALL_SEND_INTERRUPTS	19
 
 #define LGUEST_TRAP_ENTRY 0x1F
 
@@ -32,10 +34,10 @@
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Eighteen hypercalls are
+ * We use the KVM hypercall mechanism. Seventeen hypercalls are
  * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx and %edx.  If a return
- * value makes sense, it's returned in %eax.
+ * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
+ * If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
@@ -47,8 +49,9 @@
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
-	unsigned long arg0, arg1, arg2, arg3;
+	/* These map directly onto eax, ebx, ecx, edx and esi
+	 * in struct lguest_regs */
+	unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 4f8c199584e..540a466e50f 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_MCE_H
 #define _ASM_X86_MCE_H
 
-#ifdef __x86_64__
-
 #include <linux/types.h>
 #include <asm/ioctls.h>
 
@@ -10,21 +8,35 @@
  * Machine Check support for x86
  */
 
-#define MCG_CTL_P	 (1UL<<8)   /* MCG_CAP register available */
-#define MCG_EXT_P	 (1ULL<<9)   /* Extended registers available */
-#define MCG_CMCI_P	 (1ULL<<10)  /* CMCI supported */
-
-#define MCG_STATUS_RIPV  (1UL<<0)   /* restart ip valid */
-#define MCG_STATUS_EIPV  (1UL<<1)   /* ip points to correct instruction */
-#define MCG_STATUS_MCIP  (1UL<<2)   /* machine check in progress */
-
-#define MCI_STATUS_VAL   (1UL<<63)  /* valid error */
-#define MCI_STATUS_OVER  (1UL<<62)  /* previous errors lost */
-#define MCI_STATUS_UC    (1UL<<61)  /* uncorrected error */
-#define MCI_STATUS_EN    (1UL<<60)  /* error enabled */
-#define MCI_STATUS_MISCV (1UL<<59)  /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1UL<<58)  /* addr reg. valid */
-#define MCI_STATUS_PCC   (1UL<<57)  /* processor context corrupt */
+#define MCG_BANKCNT_MASK	0xff         /* Number of Banks */
+#define MCG_CTL_P		(1ULL<<8)    /* MCG_CAP register available */
+#define MCG_EXT_P		(1ULL<<9)    /* Extended registers available */
+#define MCG_CMCI_P		(1ULL<<10)   /* CMCI supported */
+#define MCG_EXT_CNT_MASK	0xff0000     /* Number of Extended registers */
+#define MCG_EXT_CNT_SHIFT	16
+#define MCG_EXT_CNT(c)		(((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
+#define MCG_SER_P	 	(1ULL<<24)   /* MCA recovery/new status bits */
+
+#define MCG_STATUS_RIPV  (1ULL<<0)   /* restart ip valid */
+#define MCG_STATUS_EIPV  (1ULL<<1)   /* ip points to correct instruction */
+#define MCG_STATUS_MCIP  (1ULL<<2)   /* machine check in progress */
+
+#define MCI_STATUS_VAL   (1ULL<<63)  /* valid error */
+#define MCI_STATUS_OVER  (1ULL<<62)  /* previous errors lost */
+#define MCI_STATUS_UC    (1ULL<<61)  /* uncorrected error */
+#define MCI_STATUS_EN    (1ULL<<60)  /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59)  /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58)  /* addr reg. valid */
+#define MCI_STATUS_PCC   (1ULL<<57)  /* processor context corrupt */
+#define MCI_STATUS_S	 (1ULL<<56)  /* Signaled machine check */
+#define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
+
+/* MISC register defines */
+#define MCM_ADDR_SEGOFF  0	/* segment offset */
+#define MCM_ADDR_LINEAR  1	/* linear address */
+#define MCM_ADDR_PHYS	 2	/* physical address */
+#define MCM_ADDR_MEM	 3	/* memory address */
+#define MCM_ADDR_GENERIC 7	/* generic */
 
 /* Fields are zero when not available */
 struct mce {
@@ -34,13 +46,19 @@ struct mce {
 	__u64 mcgstatus;
 	__u64 ip;
 	__u64 tsc;	/* cpu time stamp counter */
-	__u64 res1;	/* for future extension */
-	__u64 res2;	/* dito. */
+	__u64 time;	/* wall time_t when error was detected */
+	__u8  cpuvendor;	/* cpu vendor as encoded in system.h */
+	__u8  pad1;
+	__u16 pad2;
+	__u32 cpuid;	/* CPUID 1 EAX */
 	__u8  cs;		/* code segment */
 	__u8  bank;	/* machine check bank */
-	__u8  cpu;	/* cpu that raised the error */
+	__u8  cpu;	/* cpu number; obsolete; use extcpu now */
 	__u8  finished;   /* entry is valid */
-	__u32 pad;
+	__u32 extcpu;	/* linux cpu number that detected the error */
+	__u32 socketid;	/* CPU socket ID */
+	__u32 apicid;	/* CPU initial apic ID */
+	__u64 mcgcap;	/* MCGCAP MSR: machine check capabilities of CPU */
 };
 
 /*
@@ -57,7 +75,7 @@ struct mce_log {
 	unsigned len;	    /* = MCE_LOG_LEN */
 	unsigned next;
 	unsigned flags;
-	unsigned pad0;
+	unsigned recordlen;	/* length of struct mce */
 	struct mce entry[MCE_LOG_LEN];
 };
 
@@ -82,19 +100,16 @@ struct mce_log {
 #define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
 #define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
 
-#endif /* __x86_64__ */
-
 #ifdef __KERNEL__
 
-#ifdef CONFIG_X86_32
 extern int mce_disabled;
-#else /* CONFIG_X86_32 */
 
 #include <asm/atomic.h>
+#include <linux/percpu.h>
 
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
-DECLARE_PER_CPU(struct sys_device, device_mce);
+DECLARE_PER_CPU(struct sys_device, mce_dev);
 extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 /*
@@ -104,6 +119,8 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 #define MAX_NR_BANKS (MCE_EXTENDED_BANK - 1)
 
 #ifdef CONFIG_X86_MCE_INTEL
+extern int mce_cmci_disabled;
+extern int mce_ignore_ce;
 void mce_intel_feature_init(struct cpuinfo_x86 *c);
 void cmci_clear(void);
 void cmci_reenable(void);
@@ -123,13 +140,16 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c);
 static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
 #endif
 
-extern int mce_available(struct cpuinfo_x86 *c);
+int mce_available(struct cpuinfo_x86 *c);
+
+DECLARE_PER_CPU(unsigned, mce_exception_count);
+DECLARE_PER_CPU(unsigned, mce_poll_count);
 
 void mce_log_therm_throt_event(__u64 status);
 
 extern atomic_t mce_entry;
 
-extern void do_machine_check(struct pt_regs *, long);
+void do_machine_check(struct pt_regs *, long);
 
 typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS);
 DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
@@ -139,14 +159,16 @@ enum mcp_flags {
 	MCP_UC = (1 << 1),		/* log uncorrected errors */
 	MCP_DONTLOG = (1 << 2),		/* only clear, don't log */
 };
-extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
+void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
 
-extern int mce_notify_user(void);
+int mce_notify_irq(void);
+void mce_notify_process(void);
 
-#endif /* !CONFIG_X86_32 */
+DECLARE_PER_CPU(struct mce, injectm);
+extern struct file_operations mce_chrdev_ops;
 
 #ifdef CONFIG_X86_MCE
-extern void mcheck_init(struct cpuinfo_x86 *c);
+void mcheck_init(struct cpuinfo_x86 *c);
 #else
 #define mcheck_init(c) do { } while (0)
 #endif
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index c882664716c..ef51b501e22 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -9,20 +9,31 @@ struct cpu_signature {
 
 struct device;
 
+enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
+
 struct microcode_ops {
-	int  (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
-	int  (*request_microcode_fw) (int cpu, struct device *device);
+	enum ucode_state (*request_microcode_user) (int cpu,
+				const void __user *buf, size_t size);
 
-	void (*apply_microcode) (int cpu);
+	enum ucode_state (*request_microcode_fw) (int cpu,
+				struct device *device);
 
-	int  (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
 	void (*microcode_fini_cpu) (int cpu);
+
+	/*
+	 * The generic 'microcode_core' part guarantees that
+	 * the callbacks below run on a target cpu when they
+	 * are being called.
+	 * See also the "Synchronization" section in microcode_core.c.
+	 */
+	int (*apply_microcode) (int cpu);
+	int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
 };
 
 struct ucode_cpu_info {
-	struct cpu_signature cpu_sig;
-	int valid;
-	void *mc;
+	struct cpu_signature	cpu_sig;
+	int			valid;
+	void			*mc;
 };
 extern struct ucode_cpu_info ucode_cpu_info[];
 
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 90bc4108a4f..751af2550ed 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_X86_MMAN_H
 #define _ASM_X86_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <asm-generic/mman-common.h>
 
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 642fc7fc8cd..e2a1bb6d71e 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -61,9 +61,11 @@ extern void get_smp_config(void);
 #ifdef CONFIG_X86_MPPARSE
 extern void find_smp_config(void);
 extern void early_reserve_e820_mpc_new(void);
+extern int enable_update_mptable;
 #else
 static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
+#define enable_update_mptable 0
 #endif
 
 void __cpuinit generic_processor_info(int apicid, int version);
@@ -72,20 +74,13 @@ extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
 extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
 				   u32 gsi);
 extern void mp_config_acpi_legacy_irqs(void);
-extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+struct device;
+extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
+				 int active_high_low);
 extern int acpi_probe_gsi(void);
 #ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-				u32 gsi, int triggering, int polarity);
 extern int mp_find_ioapic(int gsi);
 extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-		   u32 gsi, int triggering, int polarity)
-{
-	return 0;
-}
 #endif
 #else /* !CONFIG_ACPI: */
 static inline int acpi_probe_gsi(void)
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index ec41fc16c16..1692fb5050e 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -121,7 +121,6 @@
 #define MSR_K8_TOP_MEM1			0xc001001a
 #define MSR_K8_TOP_MEM2			0xc001001d
 #define MSR_K8_SYSCFG			0xc0010010
-#define MSR_K8_HWCR			0xc0010015
 #define MSR_K8_INT_PENDING_MSG		0xc0010055
 /* C1E active bits in int pending message */
 #define K8_INTP_C1E_ACTIVE_MASK		0x18000000
@@ -208,7 +207,14 @@
 
 #define MSR_IA32_THERM_CONTROL		0x0000019a
 #define MSR_IA32_THERM_INTERRUPT	0x0000019b
+
+#define THERM_INT_LOW_ENABLE		(1 << 0)
+#define THERM_INT_HIGH_ENABLE		(1 << 1)
+
 #define MSR_IA32_THERM_STATUS		0x0000019c
+
+#define THERM_STATUS_PROCHOT		(1 << 0)
+
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
 /* MISC_ENABLE bits: architectural */
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 638bf624180..22603764e7d 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -12,6 +12,17 @@
 
 #include <asm/asm.h>
 #include <asm/errno.h>
+#include <asm/cpumask.h>
+
+struct msr {
+	union {
+		struct {
+			u32 l;
+			u32 h;
+		};
+		u64 q;
+	};
+};
 
 static inline unsigned long long native_read_tscp(unsigned int *aux)
 {
@@ -216,6 +227,8 @@ do {                                                            \
 #ifdef CONFIG_SMP
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
+void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 #else  /*  CONFIG_SMP  */
@@ -229,6 +242,16 @@ static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 	wrmsr(msr_no, l, h);
 	return 0;
 }
+static inline void rdmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+				struct msr *msrs)
+{
+       rdmsr_on_cpu(0, msr_no, &(msrs[0].l), &(msrs[0].h));
+}
+static inline void wrmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+				struct msr *msrs)
+{
+       wrmsr_on_cpu(0, msr_no, msrs[0].l, msrs[0].h);
+}
 static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
 				    u32 *l, u32 *h)
 {
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c45a0a568df..c9726440993 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -64,7 +64,7 @@ static inline int nmi_watchdog_active(void)
 	 * but since they are power of two we could use a
 	 * cheaper way --cvg
 	 */
-	return nmi_watchdog & 0x3;
+	return nmi_watchdog & (NMI_LOCAL_APIC | NMI_IO_APIC);
 }
 #endif
 
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
index 064ed6df4cb..c4ae822e415 100644
--- a/arch/x86/include/asm/numa_64.h
+++ b/arch/x86/include/asm/numa_64.h
@@ -17,9 +17,6 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks,
 extern void numa_init_array(void);
 extern int numa_off;
 
-extern void srat_reserve_add_area(int nodeid);
-extern int hotadd_percent;
-
 extern s16 apicid_to_node[MAX_LOCAL_APIC];
 
 extern unsigned long numa_free_all_bootmem(void);
@@ -27,6 +24,13 @@ extern void setup_node_bootmem(int nodeid, unsigned long start,
 			       unsigned long end);
 
 #ifdef CONFIG_NUMA
+/*
+ * Too small node sizes may confuse the VM badly. Usually they
+ * result from BIOS bugs. So dont recognize nodes as standalone
+ * NUMA entities that have less than this amount of RAM listed:
+ */
+#define NODE_MIN_SIZE (4*1024*1024)
+
 extern void __init init_cpu_to_node(void);
 extern void __cpuinit numa_set_node(int cpu, int node);
 extern void __cpuinit numa_clear_node(int cpu);
diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 89ed9d70b0a..625c3f0e741 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -56,7 +56,7 @@ extern bool __virt_addr_valid(unsigned long kaddr);
 #endif	/* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
+#include <asm-generic/getorder.h>
 
 #define __HAVE_ARCH_GATE_AREA 1
 
diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
index 0f915ae649a..6f1b7331313 100644
--- a/arch/x86/include/asm/page_32_types.h
+++ b/arch/x86/include/asm/page_32_types.h
@@ -54,10 +54,6 @@ extern unsigned int __VMALLOC_RESERVE;
 extern int sysctl_legacy_va_layout;
 
 extern void find_low_pfn_range(void);
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-extern void initmem_init(unsigned long, unsigned long);
-extern void free_initmem(void);
 extern void setup_bootmem_allocator(void);
 
 #endif	/* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index d38c91b7024..8d382d3abf3 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -32,22 +32,14 @@
  */
 #define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
 
-#define __PHYSICAL_START	CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN		0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
+#define __PHYSICAL_START	((CONFIG_PHYSICAL_START +	 	\
+				  (CONFIG_PHYSICAL_ALIGN - 1)) &	\
+				 ~(CONFIG_PHYSICAL_ALIGN - 1))
 
 #define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
 #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
 
-/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+/* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
 #define __PHYSICAL_MASK_SHIFT	46
 #define __VIRTUAL_MASK_SHIFT	48
 
@@ -71,12 +63,6 @@ extern unsigned long __phys_addr(unsigned long);
 
 #define vmemmap ((struct page *)VMEMMAP_START)
 
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
-extern void free_initmem(void);
-
 extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
 extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
 
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 826ad37006a..6473f5ccff8 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -46,6 +46,12 @@ extern int devmem_is_allowed(unsigned long pagenr);
 extern unsigned long max_low_pfn_mapped;
 extern unsigned long max_pfn_mapped;
 
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
+
 #endif	/* !__ASSEMBLY__ */
 
 #endif	/* _ASM_X86_PAGE_DEFS_H */
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 378e3691c08..4fb37c8a083 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -56,6 +56,7 @@ struct desc_ptr;
 struct tss_struct;
 struct mm_struct;
 struct desc_struct;
+struct task_struct;
 
 /*
  * Wrapper type for pointers to code which uses the non-standard
@@ -203,7 +204,8 @@ struct pv_cpu_ops {
 
 	void (*swapgs)(void);
 
-	struct pv_lazy_ops lazy_mode;
+	void (*start_context_switch)(struct task_struct *prev);
+	void (*end_context_switch)(struct task_struct *next);
 };
 
 struct pv_irq_ops {
@@ -1399,25 +1401,23 @@ enum paravirt_lazy_mode {
 };
 
 enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
-void paravirt_enter_lazy_cpu(void);
-void paravirt_leave_lazy_cpu(void);
+void paravirt_start_context_switch(struct task_struct *prev);
+void paravirt_end_context_switch(struct task_struct *next);
+
 void paravirt_enter_lazy_mmu(void);
 void paravirt_leave_lazy_mmu(void);
-void paravirt_leave_lazy(enum paravirt_lazy_mode mode);
 
-#define  __HAVE_ARCH_ENTER_LAZY_CPU_MODE
-static inline void arch_enter_lazy_cpu_mode(void)
+#define  __HAVE_ARCH_START_CONTEXT_SWITCH
+static inline void arch_start_context_switch(struct task_struct *prev)
 {
-	PVOP_VCALL0(pv_cpu_ops.lazy_mode.enter);
+	PVOP_VCALL1(pv_cpu_ops.start_context_switch, prev);
 }
 
-static inline void arch_leave_lazy_cpu_mode(void)
+static inline void arch_end_context_switch(struct task_struct *next)
 {
-	PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
+	PVOP_VCALL1(pv_cpu_ops.end_context_switch, next);
 }
 
-void arch_flush_lazy_cpu_mode(void);
-
 #define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
 static inline void arch_enter_lazy_mmu_mode(void)
 {
@@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64);
 
 #define paravirt_nop	((void *)_paravirt_nop)
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
 {
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index aee103b26d0..02ecb30982a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -82,22 +82,22 @@ do {							\
 	case 1:						\
 		asm(op "b %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "qi" ((T__)(val)));		\
 		break;					\
 	case 2:						\
 		asm(op "w %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "ri" ((T__)(val)));		\
 		break;					\
 	case 4:						\
 		asm(op "l %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "ri" ((T__)(val)));		\
 		break;					\
 	case 8:						\
 		asm(op "q %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "re" ((T__)val));			\
+		    : "re" ((T__)(val)));		\
 		break;					\
 	default: __bad_percpu_size();			\
 	}						\
@@ -109,7 +109,7 @@ do {							\
 	switch (sizeof(var)) {				\
 	case 1:						\
 		asm(op "b "__percpu_arg(1)",%0"		\
-		    : "=r" (ret__)			\
+		    : "=q" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 2:						\
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
new file mode 100644
index 00000000000..876ed97147b
--- /dev/null
+++ b/arch/x86/include/asm/perf_counter.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_X86_PERF_COUNTER_H
+#define _ASM_X86_PERF_COUNTER_H
+
+/*
+ * Performance counter hw details:
+ */
+
+#define X86_PMC_MAX_GENERIC					8
+#define X86_PMC_MAX_FIXED					3
+
+#define X86_PMC_IDX_GENERIC				        0
+#define X86_PMC_IDX_FIXED				       32
+#define X86_PMC_IDX_MAX					       64
+
+#define MSR_ARCH_PERFMON_PERFCTR0			      0xc1
+#define MSR_ARCH_PERFMON_PERFCTR1			      0xc2
+
+#define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
+#define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
+
+#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
+#define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
+#define ARCH_PERFMON_EVENTSEL_USR			  (1 << 16)
+
+/*
+ * Includes eventsel and unit mask as well:
+ */
+#define ARCH_PERFMON_EVENT_MASK				    0xffff
+
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 		 0
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
+		(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
+
+#define ARCH_PERFMON_BRANCH_MISSES_RETIRED			 6
+
+/*
+ * Intel "Architectural Performance Monitoring" CPUID
+ * detection/enumeration details:
+ */
+union cpuid10_eax {
+	struct {
+		unsigned int version_id:8;
+		unsigned int num_counters:8;
+		unsigned int bit_width:8;
+		unsigned int mask_length:8;
+	} split;
+	unsigned int full;
+};
+
+union cpuid10_edx {
+	struct {
+		unsigned int num_counters_fixed:4;
+		unsigned int reserved:28;
+	} split;
+	unsigned int full;
+};
+
+
+/*
+ * Fixed-purpose performance counters:
+ */
+
+/*
+ * All 3 fixed-mode PMCs are configured via this single MSR:
+ */
+#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL			0x38d
+
+/*
+ * The counts are available in three separate MSRs:
+ */
+
+/* Instr_Retired.Any: */
+#define MSR_ARCH_PERFMON_FIXED_CTR0			0x309
+#define X86_PMC_IDX_FIXED_INSTRUCTIONS			(X86_PMC_IDX_FIXED + 0)
+
+/* CPU_CLK_Unhalted.Core: */
+#define MSR_ARCH_PERFMON_FIXED_CTR1			0x30a
+#define X86_PMC_IDX_FIXED_CPU_CYCLES			(X86_PMC_IDX_FIXED + 1)
+
+/* CPU_CLK_Unhalted.Ref: */
+#define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
+#define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
+
+extern void set_perf_counter_pending(void);
+
+#define clear_perf_counter_pending()	do { } while (0)
+#define test_perf_counter_pending()	(0)
+
+#ifdef CONFIG_PERF_COUNTERS
+extern void init_hw_perf_counters(void);
+extern void perf_counters_lapic_init(void);
+#else
+static inline void init_hw_perf_counters(void)		{ }
+static inline void perf_counters_lapic_init(void)	{ }
+#endif
+
+#endif /* _ASM_X86_PERF_COUNTER_H */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 29d96d168bc..18ef7ebf263 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -81,6 +81,8 @@ static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
 #define pte_val(x)	native_pte_val(x)
 #define __pte(x)	native_make_pte(x)
 
+#define arch_end_context_switch(prev)	do {} while(0)
+
 #endif	/* CONFIG_PARAVIRT */
 
 /*
@@ -503,6 +505,8 @@ static inline int pgd_none(pgd_t pgd)
 
 #ifndef __ASSEMBLY__
 
+extern int direct_gbpages;
+
 /* local pte updates need not use xchg for locking */
 static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
 {
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 2733fad45f9..5e67c153231 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -46,6 +46,10 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
 # define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
 #endif
 
+#define MODULES_VADDR	VMALLOC_START
+#define MODULES_END	VMALLOC_END
+#define MODULES_LEN	(MODULES_VADDR - MODULES_END)
+
 #define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
 
 #endif /* _ASM_X86_PGTABLE_32_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 6b87bc6d501..abde308fdb0 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -25,10 +25,6 @@ extern pgd_t init_level4_pgt[];
 
 extern void paging_init(void);
 
-#endif /* !__ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
 #define pte_ERROR(e)					\
 	printk("%s:%d: bad pte %p(%016lx).\n",		\
 	       __FILE__, __LINE__, &(e), pte_val(e))
@@ -135,8 +131,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 
 #define update_mmu_cache(vma, address, pte) do { } while (0)
 
-extern int direct_gbpages;
-
 /* Encode and de-code a swap entry */
 #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
 #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index fbf42b8e038..766ea16fbbb 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -51,11 +51,11 @@ typedef struct { pteval_t pte; } pte_t;
 #define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE - 1))
 
-
+/* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
 #define MAXMEM		 _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
-#define VMALLOC_START    _AC(0xffffc20000000000, UL)
-#define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
-#define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
+#define VMALLOC_START    _AC(0xffffc90000000000, UL)
+#define VMALLOC_END      _AC(0xffffe8ffffffffff, UL)
+#define VMEMMAP_START	 _AC(0xffffea0000000000, UL)
 #define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
 #define MODULES_END      _AC(0xffffffffff000000, UL)
 #define MODULES_LEN   (MODULES_END - MODULES_VADDR)
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index b8238dc8786..4d258ad76a0 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -273,7 +273,6 @@ typedef struct page *pgtable_t;
 
 extern pteval_t __supported_pte_mask;
 extern int nx_enabled;
-extern void set_nx(void);
 
 #define pgprot_writecombine	pgprot_writecombine
 extern pgprot_t pgprot_writecombine(pgprot_t prot);
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c2cceae709c..c7768269b1c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -135,7 +135,8 @@ extern struct cpuinfo_x86	boot_cpu_data;
 extern struct cpuinfo_x86	new_cpu_data;
 
 extern struct tss_struct	doublefault_tss;
-extern __u32			cleared_cpu_caps[NCAPINTS];
+extern __u32			cpu_caps_cleared[NCAPINTS];
+extern __u32			cpu_caps_set[NCAPINTS];
 
 #ifdef CONFIG_SMP
 DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
@@ -409,9 +410,6 @@ DECLARE_PER_CPU(unsigned long, stack_canary);
 extern unsigned int xstate_size;
 extern void free_thread_xstate(struct task_struct *);
 extern struct kmem_cache *task_xstate_cachep;
-extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
-extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
-extern unsigned short num_cache_leaves;
 
 struct thread_struct {
 	/* Cached TLS descriptors: */
@@ -427,8 +425,12 @@ struct thread_struct {
 	unsigned short		fsindex;
 	unsigned short		gsindex;
 #endif
+#ifdef CONFIG_X86_32
 	unsigned long		ip;
+#endif
+#ifdef CONFIG_X86_64
 	unsigned long		fs;
+#endif
 	unsigned long		gs;
 	/* Hardware debugging registers: */
 	unsigned long		debugreg0;
@@ -460,14 +462,8 @@ struct thread_struct {
 	unsigned		io_bitmap_max;
 /* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set.  */
 	unsigned long	debugctlmsr;
-#ifdef CONFIG_X86_DS
-/* Debug Store context; see include/asm-x86/ds.h; goes into MSR_IA32_DS_AREA */
+	/* Debug Store context; see asm/ds.h */
 	struct ds_context	*ds_ctx;
-#endif /* CONFIG_X86_DS */
-#ifdef CONFIG_X86_PTRACE_BTS
-/* the signal to send on a bts buffer overflow */
-	unsigned int	bts_ovfl_signal;
-#endif /* CONFIG_X86_PTRACE_BTS */
 };
 
 static inline unsigned long native_get_debugreg(int regno)
@@ -795,6 +791,21 @@ static inline unsigned long get_debugctlmsr(void)
     return debugctlmsr;
 }
 
+static inline unsigned long get_debugctlmsr_on_cpu(int cpu)
+{
+	u64 debugctlmsr = 0;
+	u32 val1, val2;
+
+#ifndef CONFIG_X86_DEBUGCTLMSR
+	if (boot_cpu_data.x86 < 6)
+		return 0;
+#endif
+	rdmsr_on_cpu(cpu, MSR_IA32_DEBUGCTLMSR, &val1, &val2);
+	debugctlmsr = val1 | ((u64)val2 << 32);
+
+	return debugctlmsr;
+}
+
 static inline void update_debugctlmsr(unsigned long debugctlmsr)
 {
 #ifndef CONFIG_X86_DEBUGCTLMSR
@@ -804,6 +815,18 @@ static inline void update_debugctlmsr(unsigned long debugctlmsr)
 	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
 }
 
+static inline void update_debugctlmsr_on_cpu(int cpu,
+					     unsigned long debugctlmsr)
+{
+#ifndef CONFIG_X86_DEBUGCTLMSR
+	if (boot_cpu_data.x86 < 6)
+		return;
+#endif
+	wrmsr_on_cpu(cpu, MSR_IA32_DEBUGCTLMSR,
+		     (u32)((u64)debugctlmsr),
+		     (u32)((u64)debugctlmsr >> 32));
+}
+
 /*
  * from system description table in BIOS. Mostly for MCA use, but
  * others may find it useful:
@@ -814,6 +837,7 @@ extern unsigned int		BIOS_revision;
 
 /* Boot loader type from the setup header: */
 extern int			bootloader_type;
+extern int			bootloader_version;
 
 extern char			ignore_fpu_irq;
 
@@ -874,7 +898,6 @@ static inline void spin_lock_prefetch(const void *x)
 	.vm86_info		= NULL,					  \
 	.sysenter_cs		= __KERNEL_CS,				  \
 	.io_bitmap_ptr		= NULL,					  \
-	.fs			= __KERNEL_PERCPU,			  \
 }
 
 /*
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index e304b66abee..0f0d908349a 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs)
 
 /*
  * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps.  So regs will be the current sp.
+ * when it traps.  The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
  *
  * This is valid only for kernel mode traps.
  */
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 {
 #ifdef CONFIG_X86_32
-	return (unsigned long)regs;
+	return (unsigned long)(&regs->sp);
 #else
 	return regs->sp;
 #endif
@@ -235,12 +236,11 @@ extern int do_get_thread_area(struct task_struct *p, int idx,
 extern int do_set_thread_area(struct task_struct *p, int idx,
 			      struct user_desc __user *info, int can_allocate);
 
-extern void x86_ptrace_untrace(struct task_struct *);
-extern void x86_ptrace_fork(struct task_struct *child,
-			    unsigned long clone_flags);
+#ifdef CONFIG_X86_PTRACE_BTS
+extern void ptrace_bts_untrace(struct task_struct *tsk);
 
-#define arch_ptrace_untrace(tsk) x86_ptrace_untrace(tsk)
-#define arch_ptrace_fork(child, flags) x86_ptrace_fork(child, flags)
+#define arch_ptrace_untrace(tsk)	ptrace_bts_untrace(tsk)
+#endif /* CONFIG_X86_PTRACE_BTS */
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
index a4737dddfd5..64cf2d24fad 100644
--- a/arch/x86/include/asm/required-features.h
+++ b/arch/x86/include/asm/required-features.h
@@ -48,9 +48,15 @@
 #endif
 
 #ifdef CONFIG_X86_64
+#ifdef CONFIG_PARAVIRT
+/* Paravirtualized systems may not have PSE or PGE available */
 #define NEED_PSE	0
-#define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
 #define NEED_PGE	0
+#else
+#define NEED_PSE	(1<<(X86_FEATURE_PSE) & 31)
+#define NEED_PGE	(1<<(X86_FEATURE_PGE) & 31)
+#endif
+#define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
 #define NEED_FXSR	(1<<(X86_FEATURE_FXSR & 31))
 #define NEED_XMM	(1<<(X86_FEATURE_XMM & 31))
 #define NEED_XMM2	(1<<(X86_FEATURE_XMM2 & 31))
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index bdc2ada05ae..4093d1ed6db 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -33,7 +33,6 @@ struct x86_quirks {
 	int (*setup_ioapic_ids)(void);
 };
 
-extern void x86_quirk_pre_intr_init(void);
 extern void x86_quirk_intr_init(void);
 
 extern void x86_quirk_trap_init(void);
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
index 7761a5d554b..598457cbd0f 100644
--- a/arch/x86/include/asm/signal.h
+++ b/arch/x86/include/asm/signal.h
@@ -117,7 +117,7 @@ typedef unsigned long sigset_t;
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 
-#include <asm-generic/signal.h>
+#include <asm-generic/signal-defs.h>
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 19e0d88b966..6a84ed166ae 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -180,7 +180,7 @@ extern int safe_smp_processor_id(void);
 static inline int logical_smp_processor_id(void)
 {
 	/* we don't want to mark this access volatile - bad code generation */
-	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
+	return GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
 }
 
 #endif
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
index e3cc3c063ec..4517d6b9318 100644
--- a/arch/x86/include/asm/sparsemem.h
+++ b/arch/x86/include/asm/sparsemem.h
@@ -27,7 +27,7 @@
 #else /* CONFIG_X86_32 */
 # define SECTION_SIZE_BITS	27 /* matt - 128 is convenient right now */
 # define MAX_PHYSADDR_BITS	44
-# define MAX_PHYSMEM_BITS	44 /* Can be max 45 bits */
+# define MAX_PHYSMEM_BITS	46
 #endif
 
 #endif /* CONFIG_SPARSEMEM */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index e5e6caffec8..b7e5db87639 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
 }
 
-#ifndef CONFIG_PARAVIRT
+#ifndef CONFIG_PARAVIRT_SPINLOCKS
 
 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
 {
@@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
 	__raw_spin_lock(lock);
 }
 
-#endif
+#endif	/* CONFIG_PARAVIRT_SPINLOCKS */
 
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 82ada75f3eb..85574b7c1bc 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -225,6 +225,7 @@ struct __attribute__ ((__packed__)) vmcb {
 #define SVM_EVTINJ_VALID_ERR (1 << 11)
 
 #define SVM_EXITINTINFO_VEC_MASK SVM_EVTINJ_VEC_MASK
+#define SVM_EXITINTINFO_TYPE_MASK SVM_EVTINJ_TYPE_MASK
 
 #define	SVM_EXITINTINFO_TYPE_INTR SVM_EVTINJ_TYPE_INTR
 #define	SVM_EXITINTINFO_TYPE_NMI SVM_EVTINJ_TYPE_NMI
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 7043408f690..372b76edd63 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -1,7 +1,7 @@
 /*
  * syscalls.h - Linux syscall interfaces (arch-specific)
  *
- * Copyright (c) 2008 Jaswinder Singh
+ * Copyright (c) 2008 Jaswinder Singh Rajput
  *
  * This file is released under the GPLv2.
  * See the file COPYING for more details.
@@ -12,50 +12,55 @@
 
 #include <linux/compiler.h>
 #include <linux/linkage.h>
-#include <linux/types.h>
 #include <linux/signal.h>
+#include <linux/types.h>
 
 /* Common in X86_32 and X86_64 */
 /* kernel/ioport.c */
 asmlinkage long sys_ioperm(unsigned long, unsigned long, int);
 
+/* kernel/process.c */
+int sys_fork(struct pt_regs *);
+int sys_vfork(struct pt_regs *);
+
 /* kernel/ldt.c */
 asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
 
+/* kernel/signal.c */
+long sys_rt_sigreturn(struct pt_regs *);
+
 /* kernel/tls.c */
 asmlinkage int sys_set_thread_area(struct user_desc __user *);
 asmlinkage int sys_get_thread_area(struct user_desc __user *);
 
 /* X86_32 only */
 #ifdef CONFIG_X86_32
+/* kernel/ioport.c */
+long sys_iopl(struct pt_regs *);
+
 /* kernel/process_32.c */
-int sys_fork(struct pt_regs *);
 int sys_clone(struct pt_regs *);
-int sys_vfork(struct pt_regs *);
 int sys_execve(struct pt_regs *);
 
-/* kernel/signal_32.c */
+/* kernel/signal.c */
 asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
 asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
 int sys_sigaltstack(struct pt_regs *);
 unsigned long sys_sigreturn(struct pt_regs *);
-long sys_rt_sigreturn(struct pt_regs *);
-
-/* kernel/ioport.c */
-long sys_iopl(struct pt_regs *);
 
 /* kernel/sys_i386_32.c */
+struct mmap_arg_struct;
+struct sel_arg_struct;
+struct oldold_utsname;
+struct old_utsname;
+
 asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
 			  unsigned long, unsigned long, unsigned long);
-struct mmap_arg_struct;
 asmlinkage int old_mmap(struct mmap_arg_struct __user *);
-struct sel_arg_struct;
 asmlinkage int old_select(struct sel_arg_struct __user *);
 asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
-struct old_utsname;
 asmlinkage int sys_uname(struct old_utsname __user *);
-struct oldold_utsname;
 asmlinkage int sys_olduname(struct oldold_utsname __user *);
 
 /* kernel/vm86_32.c */
@@ -65,29 +70,27 @@ int sys_vm86(struct pt_regs *);
 #else /* CONFIG_X86_32 */
 
 /* X86_64 only */
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
+
 /* kernel/process_64.c */
-asmlinkage long sys_fork(struct pt_regs *);
 asmlinkage long sys_clone(unsigned long, unsigned long,
 			  void __user *, void __user *,
 			  struct pt_regs *);
-asmlinkage long sys_vfork(struct pt_regs *);
 asmlinkage long sys_execve(char __user *, char __user * __user *,
 			   char __user * __user *,
 			   struct pt_regs *);
 long sys_arch_prctl(int, unsigned long);
 
-/* kernel/ioport.c */
-asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
-
-/* kernel/signal_64.c */
+/* kernel/signal.c */
 asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
 				struct pt_regs *);
-long sys_rt_sigreturn(struct pt_regs *);
 
 /* kernel/sys_x86_64.c */
+struct new_utsname;
+
 asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
 			 unsigned long, unsigned long, unsigned long);
-struct new_utsname;
 asmlinkage long sys_uname(struct new_utsname __user *);
 
 #endif /* CONFIG_X86_32 */
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index f72956331c4..c4ee8056bac 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -67,6 +67,7 @@ static inline int user_termio_to_kernel_termios(struct ktermios *termios,
 	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
 	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
 	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
+	get_user(termios->c_line, &termio->c_line);
 	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
 }
 
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 8820a73ae09..602c769fc98 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -94,7 +94,8 @@ struct thread_info {
 #define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
 #define TIF_DEBUGCTLMSR		25	/* uses thread_struct.debugctlmsr */
 #define TIF_DS_AREA_MSR		26      /* uses thread_struct.ds_area_msr */
-#define TIF_SYSCALL_FTRACE	27	/* for ftrace syscall instrumentation */
+#define TIF_LAZY_MMU_UPDATES	27	/* task is updating the mmu lazily */
+#define TIF_SYSCALL_FTRACE	28	/* for ftrace syscall instrumentation */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
@@ -116,6 +117,7 @@ struct thread_info {
 #define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
 #define _TIF_DEBUGCTLMSR	(1 << TIF_DEBUGCTLMSR)
 #define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
+#define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)
 #define _TIF_SYSCALL_FTRACE	(1 << TIF_SYSCALL_FTRACE)
 
 /* work to do in syscall_trace_enter() */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 16a5c84b032..7f3eba08e7d 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -17,7 +17,7 @@
 
 static inline void __native_flush_tlb(void)
 {
-	write_cr3(read_cr3());
+	native_write_cr3(native_read_cr3());
 }
 
 static inline void __native_flush_tlb_global(void)
@@ -32,11 +32,11 @@ static inline void __native_flush_tlb_global(void)
 	 */
 	raw_local_irq_save(flags);
 
-	cr4 = read_cr4();
+	cr4 = native_read_cr4();
 	/* clear PGE */
-	write_cr4(cr4 & ~X86_CR4_PGE);
+	native_write_cr4(cr4 & ~X86_CR4_PGE);
 	/* write old PGE again and flush TLBs */
-	write_cr4(cr4);
+	native_write_cr4(cr4);
 
 	raw_local_irq_restore(flags);
 }
@@ -172,6 +172,6 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 	flush_tlb_all();
 }
 
-extern void zap_low_mappings(void);
+extern void zap_low_mappings(bool early);
 
 #endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index f44b49abca4..066ef590d7e 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -203,7 +203,8 @@ struct pci_bus;
 void x86_pci_root_bus_res_quirks(struct pci_bus *b);
 
 #ifdef CONFIG_SMP
-#define mc_capable()	(cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)
+#define mc_capable()	((boot_cpu_data.x86_max_cores > 1) && \
+			(cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids))
 #define smt_capable()			(smp_num_siblings > 1)
 #endif
 
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 0d5342515b8..bfd74c032fc 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_TRAPS_H
 
 #include <asm/debugreg.h>
+#include <asm/siginfo.h>			/* TRAP_TRACE, ... */
 
 #ifdef CONFIG_X86_32
 #define dotraplinkage
@@ -13,6 +14,9 @@ asmlinkage void divide_error(void);
 asmlinkage void debug(void);
 asmlinkage void nmi(void);
 asmlinkage void int3(void);
+asmlinkage void xen_debug(void);
+asmlinkage void xen_int3(void);
+asmlinkage void xen_stack_segment(void);
 asmlinkage void overflow(void);
 asmlinkage void bounds(void);
 asmlinkage void invalid_op(void);
@@ -74,7 +78,6 @@ static inline int get_si_code(unsigned long condition)
 }
 
 extern int panic_on_unrecovered_nmi;
-extern int kstack_depth_to_print;
 
 void math_error(void __user *);
 void math_emulate(struct math_emu_info *);
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index e6f73632007..09b97745772 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -14,12 +14,6 @@ typedef unsigned short umode_t;
  */
 #ifdef __KERNEL__
 
-#ifdef CONFIG_X86_32
-# define BITS_PER_LONG 32
-#else
-# define BITS_PER_LONG 64
-#endif
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma64_addr_t;
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 6e72d74cf8d..732a3070615 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -340,6 +340,8 @@
 #define __NR_inotify_init1	332
 #define __NR_preadv		333
 #define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_counter_open	336
 
 #ifdef __KERNEL__
 
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index f8182946232..900e1617e67 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -657,7 +657,10 @@ __SYSCALL(__NR_inotify_init1, sys_inotify_init1)
 __SYSCALL(__NR_preadv, sys_preadv)
 #define __NR_pwritev				296
 __SYSCALL(__NR_pwritev, sys_pwritev)
-
+#define __NR_rt_tgsigqueueinfo			297
+__SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
+#define __NR_perf_counter_open			298
+__SYSCALL(__NR_perf_counter_open, sys_perf_counter_open)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 9b0e61bf7a8..bddd44f2f0a 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -37,7 +37,7 @@
 #define UV_CPUS_PER_ACT_STATUS		32
 #define UV_ACT_STATUS_MASK		0x3
 #define UV_ACT_STATUS_SIZE		2
-#define UV_ACTIVATION_DESCRIPTOR_SIZE	32
+#define UV_ADP_SIZE			32
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
 #define UV_NET_ENDPOINT_INTD		0x38
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index d3a98ea1062..341070f7ad5 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -133,6 +133,7 @@ struct uv_scir_s {
 struct uv_hub_info_s {
 	unsigned long		global_mmr_base;
 	unsigned long		gpa_mask;
+	unsigned int		gnode_extra;
 	unsigned long		gnode_upper;
 	unsigned long		lowmem_remap_top;
 	unsigned long		lowmem_remap_base;
@@ -159,7 +160,8 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
  * 		p -  PNODE (local part of nsids, right shifted 1)
  */
 #define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
-#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
+#define UV_PNODE_TO_GNODE(p)		((p) |uv_hub_info->gnode_extra)
+#define UV_PNODE_TO_NASID(p)		(UV_PNODE_TO_GNODE(p) << 1)
 
 #define UV_LOCAL_MMR_BASE		0xf4000000UL
 #define UV_GLOBAL_MMR32_BASE		0xf8000000UL
@@ -173,7 +175,7 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 #define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
 
 #define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
-	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+	((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
 
 #define UV_APIC_PNODE_SHIFT	6
 
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 498f944010b..11be5ad2e0e 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -247,6 +247,7 @@ enum vmcs_field {
 #define EXIT_REASON_MSR_READ            31
 #define EXIT_REASON_MSR_WRITE           32
 #define EXIT_REASON_MWAIT_INSTRUCTION   36
+#define EXIT_REASON_MCE_DURING_VMENTRY	 41
 #define EXIT_REASON_TPR_BELOW_THRESHOLD 43
 #define EXIT_REASON_APIC_ACCESS         44
 #define EXIT_REASON_EPT_VIOLATION       48
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 145cce75cda..f3477bb8456 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -28,7 +28,7 @@ CFLAGS_paravirt.o	:= $(nostackp)
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y			+= setup.o i8259.o irqinit_$(BITS).o
+obj-y			+= setup.o i8259.o irqinit.o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
 obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
@@ -44,6 +44,7 @@ obj-y				+= process.o
 obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
 obj-$(CONFIG_X86_DS)		+= ds.o
+obj-$(CONFIG_X86_DS_SELFTEST)		+= ds_selftest.o
 obj-$(CONFIG_X86_32)		+= tls.o
 obj-$(CONFIG_IA32_EMULATION)	+= tls.o
 obj-y				+= step.o
@@ -72,7 +73,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_MODULES)		+= module_$(BITS).o
+obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
@@ -89,7 +90,8 @@ obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o
 obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
 obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 723989d7f80..631086159c5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
+#include <linux/pci.h>
 
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -522,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 {
 	unsigned int irq;
 	unsigned int plat_gsi = gsi;
@@ -532,14 +533,14 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-		if (triggering == ACPI_LEVEL_SENSITIVE)
+		if (trigger == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
 #endif
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-		plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+		plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
 	}
 #endif
 	acpi_gsi_to_irq(plat_gsi, &irq);
@@ -903,10 +904,8 @@ extern int es7000_plat;
 #endif
 
 static struct {
-	int apic_id;
 	int gsi_base;
 	int gsi_end;
-	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
 } mp_ioapic_routing[MAX_IO_APICS];
 
 int mp_find_ioapic(int gsi)
@@ -986,16 +985,12 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
 	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-#else
-	mp_ioapics[idx].apicver = 0;
-#endif
+
 	/*
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
 	mp_ioapic_routing[idx].gsi_base = gsi_base;
 	mp_ioapic_routing[idx].gsi_end = gsi_base +
 	    io_apic_get_redir_entries(idx);
@@ -1158,26 +1153,52 @@ void __init mp_config_acpi_legacy_irqs(void)
 	}
 }
 
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+			int polarity)
 {
+#ifdef CONFIG_X86_MPPARSE
+	struct mpc_intsrc mp_irq;
+	struct pci_dev *pdev;
+	unsigned char number;
+	unsigned int devfn;
 	int ioapic;
-	int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
+	u8 pin;
 
-	static int pci_irq = IRQ_COMPRESSION_START;
-	/*
-	 * Mapping between Global System Interrupts, which
-	 * represent all possible interrupts, and IRQs
-	 * assigned to actual devices.
-	 */
-	static int gsi_to_irq[MAX_GSI_NUM];
-#else
+	if (!acpi_ioapic)
+		return 0;
+	if (!dev)
+		return 0;
+	if (dev->bus != &pci_bus_type)
+		return 0;
+
+	pdev = to_pci_dev(dev);
+	number = pdev->bus->number;
+	devfn = pdev->devfn;
+	pin = pdev->pin;
+	/* print the entry should happen on mptable identically */
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.srcbus = number;
+	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+	save_mp_irq(&mp_irq);
+#endif
+	return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+	int ioapic;
+	int ioapic_pin;
+	struct io_apic_irq_attr irq_attr;
 
 	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
 		return gsi;
-#endif
 
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,93 +1217,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		gsi = ioapic_renumber_irq(ioapic, gsi);
 #endif
 
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
 	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       "%d-%d\n", mp_ioapics[ioapic].apicid,
 		       ioapic_pin);
 		return gsi;
 	}
-	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		pr_debug("Pin %d-%d already programmed\n",
-			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-		return gsi;
-#endif
-	}
-
-	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
-	/*
-	 * For GSI >= 64, use IRQ compression
-	 */
-	if ((gsi >= IRQ_COMPRESSION_START)
-	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
-		/*
-		 * For PCI devices assign IRQs in order, avoiding gaps
-		 * due to unused I/O APIC pins.
-		 */
-		int irq = gsi;
-		if (gsi < MAX_GSI_NUM) {
-			/*
-			 * Retain the VIA chipset work-around (gsi > 15), but
-			 * avoid a problem where the 8254 timer (IRQ0) is setup
-			 * via an override (so it's not on pin 0 of the ioapic),
-			 * and at the same time, the pin 0 interrupt is a PCI
-			 * type.  The gsi > 15 test could cause these two pins
-			 * to be shared as IRQ0, and they are not shareable.
-			 * So test for this condition, and if necessary, avoid
-			 * the pin collision.
-			 */
-			gsi = pci_irq++;
-			/*
-			 * Don't assign IRQ used by ACPI SCI
-			 */
-			if (gsi == acpi_gbl_FADT.sci_interrupt)
-				gsi = pci_irq++;
-			gsi_to_irq[irq] = gsi;
-		} else {
-			printk(KERN_ERR "GSI %u is too high\n", gsi);
-			return gsi;
-		}
-	}
-#endif
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
-}
 
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-			u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
-	struct mpc_intsrc mp_irq;
-	int ioapic;
+	if (enable_update_mptable)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 
-	if (!acpi_ioapic)
-		return 0;
+	set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+			     trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+			     polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+	io_apic_set_pci_routing(dev, gsi, &irq_attr);
 
-	/* print the entry should happen on mptable identically */
-	mp_irq.type = MP_INTSRC;
-	mp_irq.irqtype = mp_INT;
-	mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
-				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
-	mp_irq.srcbus = number;
-	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
-	ioapic = mp_find_ioapic(gsi);
-	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
-	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
-	save_mp_irq(&mp_irq);
-#endif
-	return 0;
+	return gsi;
 }
 
 /*
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
index 1c31cc0e9de..167bc16ce0e 100644
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -9,7 +9,7 @@
 always		:= wakeup.bin
 targets		:= wakeup.elf wakeup.lds
 
-wakeup-y	+= wakeup.o wakemain.o video-mode.o copy.o
+wakeup-y	+= wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o
 
 # The link order of the video-*.o modules can matter.  In particular,
 # video-vga.o *must* be listed first, followed by video-vesa.o.
diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S
new file mode 100644
index 00000000000..f51eb0bb56c
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/bioscall.S
@@ -0,0 +1 @@
+#include "../../../boot/bioscall.S"
diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c
new file mode 100644
index 00000000000..6206033ba20
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/regs.c
@@ -0,0 +1 @@
+#include "../../../boot/regs.c"
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 7c243a2c511..ca93638ba43 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -104,7 +104,7 @@ int acpi_save_state_mem(void)
 	initial_gs = per_cpu_offset(smp_processor_id());
 #endif
 	initial_code = (unsigned long)wakeup_long64;
-	saved_magic = 0x123456789abcdef0;
+       saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
 	return 0;
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index a97db99dad5..1c60554537c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -55,7 +55,16 @@ struct iommu_cmd {
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 static struct dma_ops_domain *find_protection_domain(u16 devid);
+static u64* alloc_pte(struct protection_domain *dom,
+		      unsigned long address, u64
+		      **pte_page, gfp_t gfp);
+static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
+				      unsigned long start_page,
+				      unsigned int pages);
 
+#ifndef BUS_NOTIFY_UNBOUND_DRIVER
+#define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
+#endif
 
 #ifdef CONFIG_AMD_IOMMU_STATS
 
@@ -213,7 +222,7 @@ irqreturn_t amd_iommu_int_handler(int irq, void *data)
 {
 	struct amd_iommu *iommu;
 
-	list_for_each_entry(iommu, &amd_iommu_list, list)
+	for_each_iommu(iommu)
 		iommu_poll_events(iommu);
 
 	return IRQ_HANDLED;
@@ -440,7 +449,7 @@ static void iommu_flush_domain(u16 domid)
 	__iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
 				      domid, 1, 1);
 
-	list_for_each_entry(iommu, &amd_iommu_list, list) {
+	for_each_iommu(iommu) {
 		spin_lock_irqsave(&iommu->lock, flags);
 		__iommu_queue_command(iommu, &cmd);
 		__iommu_completion_wait(iommu);
@@ -449,6 +458,35 @@ static void iommu_flush_domain(u16 domid)
 	}
 }
 
+void amd_iommu_flush_all_domains(void)
+{
+	int i;
+
+	for (i = 1; i < MAX_DOMAIN_ID; ++i) {
+		if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
+			continue;
+		iommu_flush_domain(i);
+	}
+}
+
+void amd_iommu_flush_all_devices(void)
+{
+	struct amd_iommu *iommu;
+	int i;
+
+	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+		if (amd_iommu_pd_table[i] == NULL)
+			continue;
+
+		iommu = amd_iommu_rlookup_table[i];
+		if (!iommu)
+			continue;
+
+		iommu_queue_inv_dev_entry(iommu, i);
+		iommu_completion_wait(iommu);
+	}
+}
+
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
@@ -468,7 +506,7 @@ static int iommu_map_page(struct protection_domain *dom,
 			  unsigned long phys_addr,
 			  int prot)
 {
-	u64 __pte, *pte, *page;
+	u64 __pte, *pte;
 
 	bus_addr  = PAGE_ALIGN(bus_addr);
 	phys_addr = PAGE_ALIGN(phys_addr);
@@ -477,27 +515,7 @@ static int iommu_map_page(struct protection_domain *dom,
 	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
 		return -EINVAL;
 
-	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
-
-	if (!IOMMU_PTE_PRESENT(*pte)) {
-		page = (u64 *)get_zeroed_page(GFP_KERNEL);
-		if (!page)
-			return -ENOMEM;
-		*pte = IOMMU_L2_PDE(virt_to_phys(page));
-	}
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
-
-	if (!IOMMU_PTE_PRESENT(*pte)) {
-		page = (u64 *)get_zeroed_page(GFP_KERNEL);
-		if (!page)
-			return -ENOMEM;
-		*pte = IOMMU_L1_PDE(virt_to_phys(page));
-	}
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L0_INDEX(bus_addr)];
+	pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
 
 	if (IOMMU_PTE_PRESENT(*pte))
 		return -EBUSY;
@@ -595,7 +613,8 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 		 * as allocated in the aperture
 		 */
 		if (addr < dma_dom->aperture_size)
-			__set_bit(addr >> PAGE_SHIFT, dma_dom->bitmap);
+			__set_bit(addr >> PAGE_SHIFT,
+				  dma_dom->aperture[0]->bitmap);
 	}
 
 	return 0;
@@ -632,42 +651,191 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  ****************************************************************************/
 
 /*
- * The address allocator core function.
+ * The address allocator core functions.
  *
  * called with domain->lock held
  */
+
+/*
+ * This function checks if there is a PTE for a given dma address. If
+ * there is one, it returns the pointer to it.
+ */
+static u64* fetch_pte(struct protection_domain *domain,
+		      unsigned long address)
+{
+	u64 *pte;
+
+	pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(address)];
+
+	if (!IOMMU_PTE_PRESENT(*pte))
+		return NULL;
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+
+	if (!IOMMU_PTE_PRESENT(*pte))
+		return NULL;
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+
+	return pte;
+}
+
+/*
+ * This function is used to add a new aperture range to an existing
+ * aperture in case of dma_ops domain allocation or address allocation
+ * failure.
+ */
+static int alloc_new_range(struct amd_iommu *iommu,
+			   struct dma_ops_domain *dma_dom,
+			   bool populate, gfp_t gfp)
+{
+	int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
+	int i;
+
+#ifdef CONFIG_IOMMU_STRESS
+	populate = false;
+#endif
+
+	if (index >= APERTURE_MAX_RANGES)
+		return -ENOMEM;
+
+	dma_dom->aperture[index] = kzalloc(sizeof(struct aperture_range), gfp);
+	if (!dma_dom->aperture[index])
+		return -ENOMEM;
+
+	dma_dom->aperture[index]->bitmap = (void *)get_zeroed_page(gfp);
+	if (!dma_dom->aperture[index]->bitmap)
+		goto out_free;
+
+	dma_dom->aperture[index]->offset = dma_dom->aperture_size;
+
+	if (populate) {
+		unsigned long address = dma_dom->aperture_size;
+		int i, num_ptes = APERTURE_RANGE_PAGES / 512;
+		u64 *pte, *pte_page;
+
+		for (i = 0; i < num_ptes; ++i) {
+			pte = alloc_pte(&dma_dom->domain, address,
+					&pte_page, gfp);
+			if (!pte)
+				goto out_free;
+
+			dma_dom->aperture[index]->pte_pages[i] = pte_page;
+
+			address += APERTURE_RANGE_SIZE / 64;
+		}
+	}
+
+	dma_dom->aperture_size += APERTURE_RANGE_SIZE;
+
+	/* Intialize the exclusion range if necessary */
+	if (iommu->exclusion_start &&
+	    iommu->exclusion_start >= dma_dom->aperture[index]->offset &&
+	    iommu->exclusion_start < dma_dom->aperture_size) {
+		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
+		int pages = iommu_num_pages(iommu->exclusion_start,
+					    iommu->exclusion_length,
+					    PAGE_SIZE);
+		dma_ops_reserve_addresses(dma_dom, startpage, pages);
+	}
+
+	/*
+	 * Check for areas already mapped as present in the new aperture
+	 * range and mark those pages as reserved in the allocator. Such
+	 * mappings may already exist as a result of requested unity
+	 * mappings for devices.
+	 */
+	for (i = dma_dom->aperture[index]->offset;
+	     i < dma_dom->aperture_size;
+	     i += PAGE_SIZE) {
+		u64 *pte = fetch_pte(&dma_dom->domain, i);
+		if (!pte || !IOMMU_PTE_PRESENT(*pte))
+			continue;
+
+		dma_ops_reserve_addresses(dma_dom, i << PAGE_SHIFT, 1);
+	}
+
+	return 0;
+
+out_free:
+	free_page((unsigned long)dma_dom->aperture[index]->bitmap);
+
+	kfree(dma_dom->aperture[index]);
+	dma_dom->aperture[index] = NULL;
+
+	return -ENOMEM;
+}
+
+static unsigned long dma_ops_area_alloc(struct device *dev,
+					struct dma_ops_domain *dom,
+					unsigned int pages,
+					unsigned long align_mask,
+					u64 dma_mask,
+					unsigned long start)
+{
+	unsigned long next_bit = dom->next_address % APERTURE_RANGE_SIZE;
+	int max_index = dom->aperture_size >> APERTURE_RANGE_SHIFT;
+	int i = start >> APERTURE_RANGE_SHIFT;
+	unsigned long boundary_size;
+	unsigned long address = -1;
+	unsigned long limit;
+
+	next_bit >>= PAGE_SHIFT;
+
+	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+			PAGE_SIZE) >> PAGE_SHIFT;
+
+	for (;i < max_index; ++i) {
+		unsigned long offset = dom->aperture[i]->offset >> PAGE_SHIFT;
+
+		if (dom->aperture[i]->offset >= dma_mask)
+			break;
+
+		limit = iommu_device_max_index(APERTURE_RANGE_PAGES, offset,
+					       dma_mask >> PAGE_SHIFT);
+
+		address = iommu_area_alloc(dom->aperture[i]->bitmap,
+					   limit, next_bit, pages, 0,
+					    boundary_size, align_mask);
+		if (address != -1) {
+			address = dom->aperture[i]->offset +
+				  (address << PAGE_SHIFT);
+			dom->next_address = address + (pages << PAGE_SHIFT);
+			break;
+		}
+
+		next_bit = 0;
+	}
+
+	return address;
+}
+
 static unsigned long dma_ops_alloc_addresses(struct device *dev,
 					     struct dma_ops_domain *dom,
 					     unsigned int pages,
 					     unsigned long align_mask,
 					     u64 dma_mask)
 {
-	unsigned long limit;
 	unsigned long address;
-	unsigned long boundary_size;
 
-	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
-			PAGE_SIZE) >> PAGE_SHIFT;
-	limit = iommu_device_max_index(dom->aperture_size >> PAGE_SHIFT, 0,
-				       dma_mask >> PAGE_SHIFT);
+#ifdef CONFIG_IOMMU_STRESS
+	dom->next_address = 0;
+	dom->need_flush = true;
+#endif
 
-	if (dom->next_bit >= limit) {
-		dom->next_bit = 0;
-		dom->need_flush = true;
-	}
+	address = dma_ops_area_alloc(dev, dom, pages, align_mask,
+				     dma_mask, dom->next_address);
 
-	address = iommu_area_alloc(dom->bitmap, limit, dom->next_bit, pages,
-				   0 , boundary_size, align_mask);
 	if (address == -1) {
-		address = iommu_area_alloc(dom->bitmap, limit, 0, pages,
-				0, boundary_size, align_mask);
+		dom->next_address = 0;
+		address = dma_ops_area_alloc(dev, dom, pages, align_mask,
+					     dma_mask, 0);
 		dom->need_flush = true;
 	}
 
-	if (likely(address != -1)) {
-		dom->next_bit = address + pages;
-		address <<= PAGE_SHIFT;
-	} else
+	if (unlikely(address == -1))
 		address = bad_dma_address;
 
 	WARN_ON((address + (PAGE_SIZE*pages)) > dom->aperture_size);
@@ -684,11 +852,23 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom,
 				   unsigned long address,
 				   unsigned int pages)
 {
-	address >>= PAGE_SHIFT;
-	iommu_area_free(dom->bitmap, address, pages);
+	unsigned i = address >> APERTURE_RANGE_SHIFT;
+	struct aperture_range *range = dom->aperture[i];
 
-	if (address >= dom->next_bit)
+	BUG_ON(i >= APERTURE_MAX_RANGES || range == NULL);
+
+#ifdef CONFIG_IOMMU_STRESS
+	if (i < 4)
+		return;
+#endif
+
+	if (address >= dom->next_address)
 		dom->need_flush = true;
+
+	address = (address % APERTURE_RANGE_SIZE) >> PAGE_SHIFT;
+
+	iommu_area_free(range->bitmap, address, pages);
+
 }
 
 /****************************************************************************
@@ -736,12 +916,16 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages)
 {
-	unsigned int last_page = dom->aperture_size >> PAGE_SHIFT;
+	unsigned int i, last_page = dom->aperture_size >> PAGE_SHIFT;
 
 	if (start_page + pages > last_page)
 		pages = last_page - start_page;
 
-	iommu_area_reserve(dom->bitmap, start_page, pages);
+	for (i = start_page; i < start_page + pages; ++i) {
+		int index = i / APERTURE_RANGE_PAGES;
+		int page  = i % APERTURE_RANGE_PAGES;
+		__set_bit(page, dom->aperture[index]->bitmap);
+	}
 }
 
 static void free_pagetable(struct protection_domain *domain)
@@ -780,14 +964,19 @@ static void free_pagetable(struct protection_domain *domain)
  */
 static void dma_ops_domain_free(struct dma_ops_domain *dom)
 {
+	int i;
+
 	if (!dom)
 		return;
 
 	free_pagetable(&dom->domain);
 
-	kfree(dom->pte_pages);
-
-	kfree(dom->bitmap);
+	for (i = 0; i < APERTURE_MAX_RANGES; ++i) {
+		if (!dom->aperture[i])
+			continue;
+		free_page((unsigned long)dom->aperture[i]->bitmap);
+		kfree(dom->aperture[i]);
+	}
 
 	kfree(dom);
 }
@@ -797,19 +986,9 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
  * It also intializes the page table and the address allocator data
  * structures required for the dma_ops interface
  */
-static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
-						   unsigned order)
+static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
 {
 	struct dma_ops_domain *dma_dom;
-	unsigned i, num_pte_pages;
-	u64 *l2_pde;
-	u64 address;
-
-	/*
-	 * Currently the DMA aperture must be between 32 MB and 1GB in size
-	 */
-	if ((order < 25) || (order > 30))
-		return NULL;
 
 	dma_dom = kzalloc(sizeof(struct dma_ops_domain), GFP_KERNEL);
 	if (!dma_dom)
@@ -826,55 +1005,20 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 	dma_dom->domain.priv = dma_dom;
 	if (!dma_dom->domain.pt_root)
 		goto free_dma_dom;
-	dma_dom->aperture_size = (1ULL << order);
-	dma_dom->bitmap = kzalloc(dma_dom->aperture_size / (PAGE_SIZE * 8),
-				  GFP_KERNEL);
-	if (!dma_dom->bitmap)
-		goto free_dma_dom;
-	/*
-	 * mark the first page as allocated so we never return 0 as
-	 * a valid dma-address. So we can use 0 as error value
-	 */
-	dma_dom->bitmap[0] = 1;
-	dma_dom->next_bit = 0;
 
 	dma_dom->need_flush = false;
 	dma_dom->target_dev = 0xffff;
 
-	/* Intialize the exclusion range if necessary */
-	if (iommu->exclusion_start &&
-	    iommu->exclusion_start < dma_dom->aperture_size) {
-		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = iommu_num_pages(iommu->exclusion_start,
-					    iommu->exclusion_length,
-					    PAGE_SIZE);
-		dma_ops_reserve_addresses(dma_dom, startpage, pages);
-	}
+	if (alloc_new_range(iommu, dma_dom, true, GFP_KERNEL))
+		goto free_dma_dom;
 
 	/*
-	 * At the last step, build the page tables so we don't need to
-	 * allocate page table pages in the dma_ops mapping/unmapping
-	 * path.
+	 * mark the first page as allocated so we never return 0 as
+	 * a valid dma-address. So we can use 0 as error value
 	 */
-	num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512);
-	dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *),
-			GFP_KERNEL);
-	if (!dma_dom->pte_pages)
-		goto free_dma_dom;
-
-	l2_pde = (u64 *)get_zeroed_page(GFP_KERNEL);
-	if (l2_pde == NULL)
-		goto free_dma_dom;
+	dma_dom->aperture[0]->bitmap[0] = 1;
+	dma_dom->next_address = 0;
 
-	dma_dom->domain.pt_root[0] = IOMMU_L2_PDE(virt_to_phys(l2_pde));
-
-	for (i = 0; i < num_pte_pages; ++i) {
-		dma_dom->pte_pages[i] = (u64 *)get_zeroed_page(GFP_KERNEL);
-		if (!dma_dom->pte_pages[i])
-			goto free_dma_dom;
-		address = virt_to_phys(dma_dom->pte_pages[i]);
-		l2_pde[i] = IOMMU_L1_PDE(address);
-	}
 
 	return dma_dom;
 
@@ -983,7 +1127,6 @@ static int device_change_notifier(struct notifier_block *nb,
 	struct protection_domain *domain;
 	struct dma_ops_domain *dma_domain;
 	struct amd_iommu *iommu;
-	int order = amd_iommu_aperture_order;
 	unsigned long flags;
 
 	if (devid > amd_iommu_last_bdf)
@@ -1002,17 +1145,7 @@ static int device_change_notifier(struct notifier_block *nb,
 			  "to a non-dma-ops domain\n", dev_name(dev));
 
 	switch (action) {
-	case BUS_NOTIFY_BOUND_DRIVER:
-		if (domain)
-			goto out;
-		dma_domain = find_protection_domain(devid);
-		if (!dma_domain)
-			dma_domain = iommu->default_dom;
-		attach_device(iommu, &dma_domain->domain, devid);
-		printk(KERN_INFO "AMD IOMMU: Using protection domain %d for "
-		       "device %s\n", dma_domain->domain.id, dev_name(dev));
-		break;
-	case BUS_NOTIFY_UNBIND_DRIVER:
+	case BUS_NOTIFY_UNBOUND_DRIVER:
 		if (!domain)
 			goto out;
 		detach_device(domain, devid);
@@ -1022,7 +1155,7 @@ static int device_change_notifier(struct notifier_block *nb,
 		dma_domain = find_protection_domain(devid);
 		if (dma_domain)
 			goto out;
-		dma_domain = dma_ops_domain_alloc(iommu, order);
+		dma_domain = dma_ops_domain_alloc(iommu);
 		if (!dma_domain)
 			goto out;
 		dma_domain->target_dev = devid;
@@ -1133,8 +1266,8 @@ static int get_device_resources(struct device *dev,
 			dma_dom = (*iommu)->default_dom;
 		*domain = &dma_dom->domain;
 		attach_device(*iommu, *domain, *bdf);
-		printk(KERN_INFO "AMD IOMMU: Using protection domain %d for "
-				"device %s\n", (*domain)->id, dev_name(dev));
+		DUMP_printk("Using protection domain %d for device %s\n",
+			    (*domain)->id, dev_name(dev));
 	}
 
 	if (domain_for_device(_bdf) == NULL)
@@ -1144,6 +1277,66 @@ static int get_device_resources(struct device *dev,
 }
 
 /*
+ * If the pte_page is not yet allocated this function is called
+ */
+static u64* alloc_pte(struct protection_domain *dom,
+		      unsigned long address, u64 **pte_page, gfp_t gfp)
+{
+	u64 *pte, *page;
+
+	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(address)];
+
+	if (!IOMMU_PTE_PRESENT(*pte)) {
+		page = (u64 *)get_zeroed_page(gfp);
+		if (!page)
+			return NULL;
+		*pte = IOMMU_L2_PDE(virt_to_phys(page));
+	}
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+
+	if (!IOMMU_PTE_PRESENT(*pte)) {
+		page = (u64 *)get_zeroed_page(gfp);
+		if (!page)
+			return NULL;
+		*pte = IOMMU_L1_PDE(virt_to_phys(page));
+	}
+
+	pte = IOMMU_PTE_PAGE(*pte);
+
+	if (pte_page)
+		*pte_page = pte;
+
+	pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+
+	return pte;
+}
+
+/*
+ * This function fetches the PTE for a given address in the aperture
+ */
+static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
+			    unsigned long address)
+{
+	struct aperture_range *aperture;
+	u64 *pte, *pte_page;
+
+	aperture = dom->aperture[APERTURE_RANGE_INDEX(address)];
+	if (!aperture)
+		return NULL;
+
+	pte = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
+	if (!pte) {
+		pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
+		aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
+	} else
+		pte += IOMMU_PTE_L0_INDEX(address);
+
+	return pte;
+}
+
+/*
  * This is the generic map function. It maps one 4kb page at paddr to
  * the given address in the DMA address space for the domain.
  */
@@ -1159,8 +1352,9 @@ static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 
 	paddr &= PAGE_MASK;
 
-	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
-	pte += IOMMU_PTE_L0_INDEX(address);
+	pte  = dma_ops_get_pte(dom, address);
+	if (!pte)
+		return bad_dma_address;
 
 	__pte = paddr | IOMMU_PTE_P | IOMMU_PTE_FC;
 
@@ -1185,14 +1379,20 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 				 struct dma_ops_domain *dom,
 				 unsigned long address)
 {
+	struct aperture_range *aperture;
 	u64 *pte;
 
 	if (address >= dom->aperture_size)
 		return;
 
-	WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
+	aperture = dom->aperture[APERTURE_RANGE_INDEX(address)];
+	if (!aperture)
+		return;
+
+	pte  = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
+	if (!pte)
+		return;
 
-	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
 	pte += IOMMU_PTE_L0_INDEX(address);
 
 	WARN_ON(!*pte);
@@ -1216,7 +1416,7 @@ static dma_addr_t __map_single(struct device *dev,
 			       u64 dma_mask)
 {
 	dma_addr_t offset = paddr & ~PAGE_MASK;
-	dma_addr_t address, start;
+	dma_addr_t address, start, ret;
 	unsigned int pages;
 	unsigned long align_mask = 0;
 	int i;
@@ -1232,14 +1432,33 @@ static dma_addr_t __map_single(struct device *dev,
 	if (align)
 		align_mask = (1UL << get_order(size)) - 1;
 
+retry:
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages, align_mask,
 					  dma_mask);
-	if (unlikely(address == bad_dma_address))
-		goto out;
+	if (unlikely(address == bad_dma_address)) {
+		/*
+		 * setting next_address here will let the address
+		 * allocator only scan the new allocated range in the
+		 * first run. This is a small optimization.
+		 */
+		dma_dom->next_address = dma_dom->aperture_size;
+
+		if (alloc_new_range(iommu, dma_dom, false, GFP_ATOMIC))
+			goto out;
+
+		/*
+		 * aperture was sucessfully enlarged by 128 MB, try
+		 * allocation again
+		 */
+		goto retry;
+	}
 
 	start = address;
 	for (i = 0; i < pages; ++i) {
-		dma_ops_domain_map(iommu, dma_dom, start, paddr, dir);
+		ret = dma_ops_domain_map(iommu, dma_dom, start, paddr, dir);
+		if (ret == bad_dma_address)
+			goto out_unmap;
+
 		paddr += PAGE_SIZE;
 		start += PAGE_SIZE;
 	}
@@ -1255,6 +1474,17 @@ static dma_addr_t __map_single(struct device *dev,
 
 out:
 	return address;
+
+out_unmap:
+
+	for (--i; i >= 0; --i) {
+		start -= PAGE_SIZE;
+		dma_ops_domain_unmap(iommu, dma_dom, start);
+	}
+
+	dma_ops_free_addresses(dma_dom, address, pages);
+
+	return bad_dma_address;
 }
 
 /*
@@ -1537,8 +1767,10 @@ static void *alloc_coherent(struct device *dev, size_t size,
 	*dma_addr = __map_single(dev, iommu, domain->priv, paddr,
 				 size, DMA_BIDIRECTIONAL, true, dma_mask);
 
-	if (*dma_addr == bad_dma_address)
+	if (*dma_addr == bad_dma_address) {
+		spin_unlock_irqrestore(&domain->lock, flags);
 		goto out_free;
+	}
 
 	iommu_completion_wait(iommu);
 
@@ -1625,7 +1857,6 @@ static void prealloc_protection_domains(void)
 	struct pci_dev *dev = NULL;
 	struct dma_ops_domain *dma_dom;
 	struct amd_iommu *iommu;
-	int order = amd_iommu_aperture_order;
 	u16 devid;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
@@ -1638,7 +1869,7 @@ static void prealloc_protection_domains(void)
 		iommu = amd_iommu_rlookup_table[devid];
 		if (!iommu)
 			continue;
-		dma_dom = dma_ops_domain_alloc(iommu, order);
+		dma_dom = dma_ops_domain_alloc(iommu);
 		if (!dma_dom)
 			continue;
 		init_unity_mappings_for_device(dma_dom, devid);
@@ -1664,7 +1895,6 @@ static struct dma_map_ops amd_iommu_dma_ops = {
 int __init amd_iommu_init_dma_ops(void)
 {
 	struct amd_iommu *iommu;
-	int order = amd_iommu_aperture_order;
 	int ret;
 
 	/*
@@ -1672,8 +1902,8 @@ int __init amd_iommu_init_dma_ops(void)
 	 * found in the system. Devices not assigned to any other
 	 * protection domain will be assigned to the default one.
 	 */
-	list_for_each_entry(iommu, &amd_iommu_list, list) {
-		iommu->default_dom = dma_ops_domain_alloc(iommu, order);
+	for_each_iommu(iommu) {
+		iommu->default_dom = dma_ops_domain_alloc(iommu);
 		if (iommu->default_dom == NULL)
 			return -ENOMEM;
 		iommu->default_dom->domain.flags |= PD_DEFAULT_MASK;
@@ -1710,7 +1940,7 @@ int __init amd_iommu_init_dma_ops(void)
 
 free_domains:
 
-	list_for_each_entry(iommu, &amd_iommu_list, list) {
+	for_each_iommu(iommu) {
 		if (iommu->default_dom)
 			dma_ops_domain_free(iommu->default_dom);
 	}
@@ -1842,7 +2072,7 @@ static int amd_iommu_attach_device(struct iommu_domain *dom,
 
 	old_domain = domain_for_device(devid);
 	if (old_domain)
-		return -EBUSY;
+		detach_device(old_domain, devid);
 
 	attach_device(iommu, domain, devid);
 
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 8c0be0902da..238989ec077 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -115,15 +115,21 @@ struct ivmd_header {
 	u64 range_length;
 } __attribute__((packed));
 
+bool amd_iommu_dump;
+
 static int __initdata amd_iommu_detected;
 
 u16 amd_iommu_last_bdf;			/* largest PCI device id we have
 					   to handle */
 LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
 					   we find in ACPI */
-unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
+#ifdef CONFIG_IOMMU_STRESS
+bool amd_iommu_isolate = false;
+#else
 bool amd_iommu_isolate = true;		/* if true, device isolation is
 					   enabled */
+#endif
+
 bool amd_iommu_unmap_flush;		/* if true, flush on every unmap */
 
 LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
@@ -175,7 +181,7 @@ static inline void update_last_devid(u16 devid)
 static inline unsigned long tbl_size(int entry_size)
 {
 	unsigned shift = PAGE_SHIFT +
-			 get_order(amd_iommu_last_bdf * entry_size);
+			 get_order(((int)amd_iommu_last_bdf + 1) * entry_size);
 
 	return 1UL << shift;
 }
@@ -193,7 +199,7 @@ static inline unsigned long tbl_size(int entry_size)
  * This function set the exclusion range in the IOMMU. DMA accesses to the
  * exclusion range are passed through untranslated
  */
-static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
+static void iommu_set_exclusion_range(struct amd_iommu *iommu)
 {
 	u64 start = iommu->exclusion_start & PAGE_MASK;
 	u64 limit = (start + iommu->exclusion_length) & PAGE_MASK;
@@ -225,7 +231,7 @@ static void __init iommu_set_device_table(struct amd_iommu *iommu)
 }
 
 /* Generic functions to enable/disable certain features of the IOMMU. */
-static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
+static void iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
 {
 	u32 ctrl;
 
@@ -244,7 +250,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 }
 
 /* Function to enable the hardware */
-static void __init iommu_enable(struct amd_iommu *iommu)
+static void iommu_enable(struct amd_iommu *iommu)
 {
 	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at %s cap 0x%hx\n",
 	       dev_name(&iommu->dev->dev), iommu->cap_ptr);
@@ -252,11 +258,9 @@ static void __init iommu_enable(struct amd_iommu *iommu)
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
 }
 
-/* Function to enable IOMMU event logging and event interrupts */
-static void __init iommu_enable_event_logging(struct amd_iommu *iommu)
+static void iommu_disable(struct amd_iommu *iommu)
 {
-	iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
-	iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
+	iommu_feature_disable(iommu, CONTROL_IOMMU_EN);
 }
 
 /*
@@ -413,25 +417,36 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 {
 	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 			get_order(CMD_BUFFER_SIZE));
-	u64 entry;
 
 	if (cmd_buf == NULL)
 		return NULL;
 
 	iommu->cmd_buf_size = CMD_BUFFER_SIZE;
 
-	entry = (u64)virt_to_phys(cmd_buf);
+	return cmd_buf;
+}
+
+/*
+ * This function writes the command buffer address to the hardware and
+ * enables it.
+ */
+static void iommu_enable_command_buffer(struct amd_iommu *iommu)
+{
+	u64 entry;
+
+	BUG_ON(iommu->cmd_buf == NULL);
+
+	entry = (u64)virt_to_phys(iommu->cmd_buf);
 	entry |= MMIO_CMD_SIZE_512;
+
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
-			&entry, sizeof(entry));
+		    &entry, sizeof(entry));
 
 	/* set head and tail to zero manually */
 	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
 	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
 
 	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
-
-	return cmd_buf;
 }
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
@@ -443,20 +458,27 @@ static void __init free_command_buffer(struct amd_iommu *iommu)
 /* allocates the memory where the IOMMU will log its events to */
 static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
 {
-	u64 entry;
 	iommu->evt_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 						get_order(EVT_BUFFER_SIZE));
 
 	if (iommu->evt_buf == NULL)
 		return NULL;
 
+	return iommu->evt_buf;
+}
+
+static void iommu_enable_event_buffer(struct amd_iommu *iommu)
+{
+	u64 entry;
+
+	BUG_ON(iommu->evt_buf == NULL);
+
 	entry = (u64)virt_to_phys(iommu->evt_buf) | EVT_LEN_MASK;
+
 	memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET,
 		    &entry, sizeof(entry));
 
-	iommu->evt_buf_size = EVT_BUFFER_SIZE;
-
-	return iommu->evt_buf;
+	iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
 }
 
 static void __init free_event_buffer(struct amd_iommu *iommu)
@@ -596,32 +618,83 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	p += sizeof(struct ivhd_header);
 	end += h->length;
 
+
 	while (p < end) {
 		e = (struct ivhd_entry *)p;
 		switch (e->type) {
 		case IVHD_DEV_ALL:
+
+			DUMP_printk("  DEV_ALL\t\t\t first devid: %02x:%02x.%x"
+				    " last device %02x:%02x.%x flags: %02x\n",
+				    PCI_BUS(iommu->first_device),
+				    PCI_SLOT(iommu->first_device),
+				    PCI_FUNC(iommu->first_device),
+				    PCI_BUS(iommu->last_device),
+				    PCI_SLOT(iommu->last_device),
+				    PCI_FUNC(iommu->last_device),
+				    e->flags);
+
 			for (dev_i = iommu->first_device;
 					dev_i <= iommu->last_device; ++dev_i)
 				set_dev_entry_from_acpi(iommu, dev_i,
 							e->flags, 0);
 			break;
 		case IVHD_DEV_SELECT:
+
+			DUMP_printk("  DEV_SELECT\t\t\t devid: %02x:%02x.%x "
+				    "flags: %02x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid),
+				    e->flags);
+
 			devid = e->devid;
 			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
 			break;
 		case IVHD_DEV_SELECT_RANGE_START:
+
+			DUMP_printk("  DEV_SELECT_RANGE_START\t "
+				    "devid: %02x:%02x.%x flags: %02x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid),
+				    e->flags);
+
 			devid_start = e->devid;
 			flags = e->flags;
 			ext_flags = 0;
 			alias = false;
 			break;
 		case IVHD_DEV_ALIAS:
+
+			DUMP_printk("  DEV_ALIAS\t\t\t devid: %02x:%02x.%x "
+				    "flags: %02x devid_to: %02x:%02x.%x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid),
+				    e->flags,
+				    PCI_BUS(e->ext >> 8),
+				    PCI_SLOT(e->ext >> 8),
+				    PCI_FUNC(e->ext >> 8));
+
 			devid = e->devid;
 			devid_to = e->ext >> 8;
-			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
+			set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
 		case IVHD_DEV_ALIAS_RANGE:
+
+			DUMP_printk("  DEV_ALIAS_RANGE\t\t "
+				    "devid: %02x:%02x.%x flags: %02x "
+				    "devid_to: %02x:%02x.%x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid),
+				    e->flags,
+				    PCI_BUS(e->ext >> 8),
+				    PCI_SLOT(e->ext >> 8),
+				    PCI_FUNC(e->ext >> 8));
+
 			devid_start = e->devid;
 			flags = e->flags;
 			devid_to = e->ext >> 8;
@@ -629,17 +702,39 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 			alias = true;
 			break;
 		case IVHD_DEV_EXT_SELECT:
+
+			DUMP_printk("  DEV_EXT_SELECT\t\t devid: %02x:%02x.%x "
+				    "flags: %02x ext: %08x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid),
+				    e->flags, e->ext);
+
 			devid = e->devid;
 			set_dev_entry_from_acpi(iommu, devid, e->flags,
 						e->ext);
 			break;
 		case IVHD_DEV_EXT_SELECT_RANGE:
+
+			DUMP_printk("  DEV_EXT_SELECT_RANGE\t devid: "
+				    "%02x:%02x.%x flags: %02x ext: %08x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid),
+				    e->flags, e->ext);
+
 			devid_start = e->devid;
 			flags = e->flags;
 			ext_flags = e->ext;
 			alias = false;
 			break;
 		case IVHD_DEV_RANGE_END:
+
+			DUMP_printk("  DEV_RANGE_END\t\t devid: %02x:%02x.%x\n",
+				    PCI_BUS(e->devid),
+				    PCI_SLOT(e->devid),
+				    PCI_FUNC(e->devid));
+
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
 				if (alias)
@@ -679,7 +774,7 @@ static void __init free_iommu_all(void)
 {
 	struct amd_iommu *iommu, *next;
 
-	list_for_each_entry_safe(iommu, next, &amd_iommu_list, list) {
+	for_each_iommu_safe(iommu, next) {
 		list_del(&iommu->list);
 		free_iommu_one(iommu);
 		kfree(iommu);
@@ -710,7 +805,6 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	if (!iommu->mmio_base)
 		return -ENOMEM;
 
-	iommu_set_device_table(iommu);
 	iommu->cmd_buf = alloc_command_buffer(iommu);
 	if (!iommu->cmd_buf)
 		return -ENOMEM;
@@ -746,6 +840,15 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 		h = (struct ivhd_header *)p;
 		switch (*p) {
 		case ACPI_IVHD_TYPE:
+
+			DUMP_printk("IOMMU: device: %02x:%02x.%01x cap: %04x "
+				    "seg: %d flags: %01x info %04x\n",
+				    PCI_BUS(h->devid), PCI_SLOT(h->devid),
+				    PCI_FUNC(h->devid), h->cap_ptr,
+				    h->pci_seg, h->flags, h->info);
+			DUMP_printk("       mmio-addr: %016llx\n",
+				    h->mmio_phys);
+
 			iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
 			if (iommu == NULL)
 				return -ENOMEM;
@@ -773,56 +876,9 @@ static int __init init_iommu_all(struct acpi_table_header *table)
  *
  ****************************************************************************/
 
-static int __init iommu_setup_msix(struct amd_iommu *iommu)
-{
-	struct amd_iommu *curr;
-	struct msix_entry entries[32]; /* only 32 supported by AMD IOMMU */
-	int nvec = 0, i;
-
-	list_for_each_entry(curr, &amd_iommu_list, list) {
-		if (curr->dev == iommu->dev) {
-			entries[nvec].entry = curr->evt_msi_num;
-			entries[nvec].vector = 0;
-			curr->int_enabled = true;
-			nvec++;
-		}
-	}
-
-	if (pci_enable_msix(iommu->dev, entries, nvec)) {
-		pci_disable_msix(iommu->dev);
-		return 1;
-	}
-
-	for (i = 0; i < nvec; ++i) {
-		int r = request_irq(entries->vector, amd_iommu_int_handler,
-				    IRQF_SAMPLE_RANDOM,
-				    "AMD IOMMU",
-				    NULL);
-		if (r)
-			goto out_free;
-	}
-
-	return 0;
-
-out_free:
-	for (i -= 1; i >= 0; --i)
-		free_irq(entries->vector, NULL);
-
-	pci_disable_msix(iommu->dev);
-
-	return 1;
-}
-
 static int __init iommu_setup_msi(struct amd_iommu *iommu)
 {
 	int r;
-	struct amd_iommu *curr;
-
-	list_for_each_entry(curr, &amd_iommu_list, list) {
-		if (curr->dev == iommu->dev)
-			curr->int_enabled = true;
-	}
-
 
 	if (pci_enable_msi(iommu->dev))
 		return 1;
@@ -837,17 +893,18 @@ static int __init iommu_setup_msi(struct amd_iommu *iommu)
 		return 1;
 	}
 
+	iommu->int_enabled = true;
+	iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
+
 	return 0;
 }
 
-static int __init iommu_init_msi(struct amd_iommu *iommu)
+static int iommu_init_msi(struct amd_iommu *iommu)
 {
 	if (iommu->int_enabled)
 		return 0;
 
-	if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSIX))
-		return iommu_setup_msix(iommu);
-	else if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSI))
+	if (pci_find_capability(iommu->dev, PCI_CAP_ID_MSI))
 		return iommu_setup_msi(iommu);
 
 	return 1;
@@ -899,6 +956,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 static int __init init_unity_map_range(struct ivmd_header *m)
 {
 	struct unity_map_entry *e = 0;
+	char *s;
 
 	e = kzalloc(sizeof(*e), GFP_KERNEL);
 	if (e == NULL)
@@ -906,14 +964,19 @@ static int __init init_unity_map_range(struct ivmd_header *m)
 
 	switch (m->type) {
 	default:
+		kfree(e);
+		return 0;
 	case ACPI_IVMD_TYPE:
+		s = "IVMD_TYPEi\t\t\t";
 		e->devid_start = e->devid_end = m->devid;
 		break;
 	case ACPI_IVMD_TYPE_ALL:
+		s = "IVMD_TYPE_ALL\t\t";
 		e->devid_start = 0;
 		e->devid_end = amd_iommu_last_bdf;
 		break;
 	case ACPI_IVMD_TYPE_RANGE:
+		s = "IVMD_TYPE_RANGE\t\t";
 		e->devid_start = m->devid;
 		e->devid_end = m->aux;
 		break;
@@ -922,6 +985,13 @@ static int __init init_unity_map_range(struct ivmd_header *m)
 	e->address_end = e->address_start + PAGE_ALIGN(m->range_length);
 	e->prot = m->flags >> 1;
 
+	DUMP_printk("%s devid_start: %02x:%02x.%x devid_end: %02x:%02x.%x"
+		    " range_start: %016llx range_end: %016llx flags: %x\n", s,
+		    PCI_BUS(e->devid_start), PCI_SLOT(e->devid_start),
+		    PCI_FUNC(e->devid_start), PCI_BUS(e->devid_end),
+		    PCI_SLOT(e->devid_end), PCI_FUNC(e->devid_end),
+		    e->address_start, e->address_end, m->flags);
+
 	list_add_tail(&e->list, &amd_iommu_unity_map);
 
 	return 0;
@@ -967,18 +1037,28 @@ static void init_device_table(void)
  * This function finally enables all IOMMUs found in the system after
  * they have been initialized
  */
-static void __init enable_iommus(void)
+static void enable_iommus(void)
 {
 	struct amd_iommu *iommu;
 
-	list_for_each_entry(iommu, &amd_iommu_list, list) {
+	for_each_iommu(iommu) {
+		iommu_set_device_table(iommu);
+		iommu_enable_command_buffer(iommu);
+		iommu_enable_event_buffer(iommu);
 		iommu_set_exclusion_range(iommu);
 		iommu_init_msi(iommu);
-		iommu_enable_event_logging(iommu);
 		iommu_enable(iommu);
 	}
 }
 
+static void disable_iommus(void)
+{
+	struct amd_iommu *iommu;
+
+	for_each_iommu(iommu)
+		iommu_disable(iommu);
+}
+
 /*
  * Suspend/Resume support
  * disable suspend until real resume implemented
@@ -986,12 +1066,31 @@ static void __init enable_iommus(void)
 
 static int amd_iommu_resume(struct sys_device *dev)
 {
+	/*
+	 * Disable IOMMUs before reprogramming the hardware registers.
+	 * IOMMU is still enabled from the resume kernel.
+	 */
+	disable_iommus();
+
+	/* re-load the hardware */
+	enable_iommus();
+
+	/*
+	 * we have to flush after the IOMMUs are enabled because a
+	 * disabled IOMMU will never execute the commands we send
+	 */
+	amd_iommu_flush_all_domains();
+	amd_iommu_flush_all_devices();
+
 	return 0;
 }
 
 static int amd_iommu_suspend(struct sys_device *dev, pm_message_t state)
 {
-	return -EINVAL;
+	/* disable IOMMUs to go out of the way for BIOS */
+	disable_iommus();
+
+	return 0;
 }
 
 static struct sysdev_class amd_iommu_sysdev_class = {
@@ -1137,9 +1236,6 @@ int __init amd_iommu_init(void)
 
 	enable_iommus();
 
-	printk(KERN_INFO "AMD IOMMU: aperture size is %d MB\n",
-			(1 << (amd_iommu_aperture_order-20)));
-
 	printk(KERN_INFO "AMD IOMMU: device isolation ");
 	if (amd_iommu_isolate)
 		printk("enabled\n");
@@ -1211,6 +1307,13 @@ void __init amd_iommu_detect(void)
  *
  ****************************************************************************/
 
+static int __init parse_amd_iommu_dump(char *str)
+{
+	amd_iommu_dump = true;
+
+	return 1;
+}
+
 static int __init parse_amd_iommu_options(char *str)
 {
 	for (; *str; ++str) {
@@ -1225,15 +1328,5 @@ static int __init parse_amd_iommu_options(char *str)
 	return 1;
 }
 
-static int __init parse_amd_iommu_size_options(char *str)
-{
-	unsigned order = PAGE_SHIFT + get_order(memparse(str, &str));
-
-	if ((order > 24) && (order < 31))
-		amd_iommu_aperture_order = order;
-
-	return 1;
-}
-
+__setup("amd_iommu_dump", parse_amd_iommu_dump);
 __setup("amd_iommu=", parse_amd_iommu_options);
-__setup("amd_iommu_size=", parse_amd_iommu_size_options);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f2870920f24..8c7c042ecad 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -14,6 +14,7 @@
  *	Mikael Pettersson	:	PM converted to driver model.
  */
 
+#include <linux/perf_counter.h>
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/acpi_pmtmr.h>
@@ -34,6 +35,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 
+#include <asm/perf_counter.h>
 #include <asm/pgalloc.h>
 #include <asm/atomic.h>
 #include <asm/mpspec.h>
@@ -98,6 +100,29 @@ early_param("lapic", parse_lapic);
 /* Local APIC was disabled by the BIOS and enabled by the kernel */
 static int enabled_via_apicbase;
 
+/*
+ * Handle interrupt mode configuration register (IMCR).
+ * This register controls whether the interrupt signals
+ * that reach the BSP come from the master PIC or from the
+ * local APIC. Before entering Symmetric I/O Mode, either
+ * the BIOS or the operating system must switch out of
+ * PIC Mode by changing the IMCR.
+ */
+static inline void imcr_pic_to_apic(void)
+{
+	/* select IMCR register */
+	outb(0x70, 0x22);
+	/* NMI and 8259 INTR go through APIC */
+	outb(0x01, 0x23);
+}
+
+static inline void imcr_apic_to_pic(void)
+{
+	/* select IMCR register */
+	outb(0x70, 0x22);
+	/* NMI and 8259 INTR go directly to BSP */
+	outb(0x00, 0x23);
+}
 #endif
 
 #ifdef CONFIG_X86_64
@@ -111,13 +136,19 @@ static __init int setup_apicpmtimer(char *s)
 __setup("apicpmtimer", setup_apicpmtimer);
 #endif
 
+int x2apic_mode;
 #ifdef CONFIG_X86_X2APIC
-int x2apic;
 /* x2apic enabled before OS handover */
 static int x2apic_preenabled;
 static int disable_x2apic;
 static __init int setup_nox2apic(char *str)
 {
+	if (x2apic_enabled()) {
+		pr_warning("Bios already enabled x2apic, "
+			   "can't enforce nox2apic");
+		return 0;
+	}
+
 	disable_x2apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
@@ -209,6 +240,31 @@ static int modern_apic(void)
 	return lapic_get_version() >= 0x14;
 }
 
+/*
+ * bare function to substitute write operation
+ * and it's _that_ fast :)
+ */
+static void native_apic_write_dummy(u32 reg, u32 v)
+{
+	WARN_ON_ONCE((cpu_has_apic || !disable_apic));
+}
+
+static u32 native_apic_read_dummy(u32 reg)
+{
+	WARN_ON_ONCE((cpu_has_apic && !disable_apic));
+	return 0;
+}
+
+/*
+ * right after this call apic->write/read doesn't do anything
+ * note that there is no restore operation it works one way
+ */
+void apic_disable(void)
+{
+	apic->read = native_apic_read_dummy;
+	apic->write = native_apic_write_dummy;
+}
+
 void native_apic_wait_icr_idle(void)
 {
 	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
@@ -348,7 +404,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 
 static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
 {
-	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+	unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0);
 	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
 
 	apic_write(reg, v);
@@ -815,7 +871,7 @@ void clear_local_APIC(void)
 	u32 v;
 
 	/* APIC hasn't been mapped yet */
-	if (!x2apic && !apic_phys)
+	if (!x2apic_mode && !apic_phys)
 		return;
 
 	maxlvt = lapic_get_maxlvt();
@@ -843,7 +899,7 @@ void clear_local_APIC(void)
 	}
 
 	/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
 		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
@@ -1133,6 +1189,7 @@ void __cpuinit setup_local_APIC(void)
 		apic_write(APIC_ESR, 0);
 	}
 #endif
+	perf_counters_lapic_init();
 
 	preempt_disable();
 
@@ -1287,7 +1344,7 @@ void check_x2apic(void)
 {
 	if (x2apic_enabled()) {
 		pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
-		x2apic_preenabled = x2apic = 1;
+		x2apic_preenabled = x2apic_mode = 1;
 	}
 }
 
@@ -1295,7 +1352,7 @@ void enable_x2apic(void)
 {
 	int msr, msr2;
 
-	if (!x2apic)
+	if (!x2apic_mode)
 		return;
 
 	rdmsr(MSR_IA32_APICBASE, msr, msr2);
@@ -1304,6 +1361,7 @@ void enable_x2apic(void)
 		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
 	}
 }
+#endif /* CONFIG_X86_X2APIC */
 
 void __init enable_IR_x2apic(void)
 {
@@ -1312,32 +1370,21 @@ void __init enable_IR_x2apic(void)
 	unsigned long flags;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 
-	if (!cpu_has_x2apic)
-		return;
-
-	if (!x2apic_preenabled && disable_x2apic) {
-		pr_info("Skipped enabling x2apic and Interrupt-remapping "
-			"because of nox2apic\n");
-		return;
+	ret = dmar_table_init();
+	if (ret) {
+		pr_debug("dmar_table_init() failed with %d:\n", ret);
+		goto ir_failed;
 	}
 
-	if (x2apic_preenabled && disable_x2apic)
-		panic("Bios already enabled x2apic, can't enforce nox2apic");
-
-	if (!x2apic_preenabled && skip_ioapic_setup) {
-		pr_info("Skipped enabling x2apic and Interrupt-remapping "
-			"because of skipping io-apic setup\n");
-		return;
+	if (!intr_remapping_supported()) {
+		pr_debug("intr-remapping not supported\n");
+		goto ir_failed;
 	}
 
-	ret = dmar_table_init();
-	if (ret) {
-		pr_info("dmar_table_init() failed with %d:\n", ret);
 
-		if (x2apic_preenabled)
-			panic("x2apic enabled by bios. But IR enabling failed");
-		else
-			pr_info("Not enabling x2apic,Intr-remapping\n");
+	if (!x2apic_preenabled && skip_ioapic_setup) {
+		pr_info("Skipped enabling intr-remap because of skipping "
+			"io-apic setup\n");
 		return;
 	}
 
@@ -1357,19 +1404,16 @@ void __init enable_IR_x2apic(void)
 	mask_IO_APIC_setup(ioapic_entries);
 	mask_8259A();
 
-	ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
-
-	if (ret && x2apic_preenabled) {
-		local_irq_restore(flags);
-		panic("x2apic enabled by bios. But IR enabling failed");
-	}
-
+	ret = enable_intr_remapping(x2apic_supported());
 	if (ret)
 		goto end_restore;
 
-	if (!x2apic) {
-		x2apic = 1;
+	pr_info("Enabled Interrupt-remapping\n");
+
+	if (x2apic_supported() && !x2apic_mode) {
+		x2apic_mode = 1;
 		enable_x2apic();
+		pr_info("Enabled x2apic\n");
 	}
 
 end_restore:
@@ -1378,37 +1422,34 @@ end_restore:
 		 * IR enabling failed
 		 */
 		restore_IO_APIC_setup(ioapic_entries);
-	else
-		reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries);
 
 	unmask_8259A();
 	local_irq_restore(flags);
 
 end:
-	if (!ret) {
-		if (!x2apic_preenabled)
-			pr_info("Enabled x2apic and interrupt-remapping\n");
-		else
-			pr_info("Enabled Interrupt-remapping\n");
-	} else
-		pr_err("Failed to enable Interrupt-remapping and x2apic\n");
 	if (ioapic_entries)
 		free_ioapic_entries(ioapic_entries);
+
+	if (!ret)
+		return;
+
+ir_failed:
+	if (x2apic_preenabled)
+		panic("x2apic enabled by bios. But IR enabling failed");
+	else if (cpu_has_x2apic)
+		pr_info("Not enabling x2apic,Intr-remapping\n");
 #else
 	if (!cpu_has_x2apic)
 		return;
 
 	if (x2apic_preenabled)
 		panic("x2apic enabled prior OS handover,"
-		      " enable CONFIG_INTR_REMAP");
-
-	pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
-		" and x2apic\n");
+		      " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
 #endif
 
 	return;
 }
-#endif /* CONFIG_X86_X2APIC */
+
 
 #ifdef CONFIG_X86_64
 /*
@@ -1425,7 +1466,6 @@ static int __init detect_init_APIC(void)
 	}
 
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-	boot_cpu_physical_apicid = 0;
 	return 0;
 }
 #else
@@ -1539,32 +1579,49 @@ void __init early_init_lapic_mapping(void)
  */
 void __init init_apic_mappings(void)
 {
-	if (x2apic) {
+	unsigned int new_apicid;
+
+	if (x2apic_mode) {
 		boot_cpu_physical_apicid = read_apic_id();
 		return;
 	}
 
-	/*
-	 * If no local APIC can be found then set up a fake all
-	 * zeroes page to simulate the local APIC and another
-	 * one for the IO-APIC.
-	 */
+	/* If no local APIC can be found return early */
 	if (!smp_found_config && detect_init_APIC()) {
-		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
-		apic_phys = __pa(apic_phys);
-	} else
+		/* lets NOP'ify apic operations */
+		pr_info("APIC: disable apic facility\n");
+		apic_disable();
+	} else {
 		apic_phys = mp_lapic_addr;
 
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-	apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
-				APIC_BASE, apic_phys);
+		/*
+		 * acpi lapic path already maps that address in
+		 * acpi_register_lapic_address()
+		 */
+		if (!acpi_lapic)
+			set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+
+		apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
+					APIC_BASE, apic_phys);
+	}
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = read_apic_id();
+	new_apicid = read_apic_id();
+	if (boot_cpu_physical_apicid != new_apicid) {
+		boot_cpu_physical_apicid = new_apicid;
+		/*
+		 * yeah -- we lie about apic_version
+		 * in case if apic was disabled via boot option
+		 * but it's not a problem for SMP compiled kernel
+		 * since smp_sanity_check is prepared for such a case
+		 * and disable smp mode
+		 */
+		apic_version[new_apicid] =
+			 GET_APIC_VERSION(apic_read(APIC_LVR));
+	}
 }
 
 /*
@@ -1733,8 +1790,7 @@ void __init connect_bsp_APIC(void)
 		 */
 		apic_printk(APIC_VERBOSE, "leaving PIC mode, "
 				"enabling APIC mode.\n");
-		outb(0x70, 0x22);
-		outb(0x01, 0x23);
+		imcr_pic_to_apic();
 	}
 #endif
 	if (apic->enable_apic_mode)
@@ -1762,8 +1818,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 		 */
 		apic_printk(APIC_VERBOSE, "disabling APIC mode, "
 				"entering PIC mode.\n");
-		outb(0x70, 0x22);
-		outb(0x00, 0x23);
+		imcr_apic_to_pic();
 		return;
 	}
 #endif
@@ -1962,17 +2017,17 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
 	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
 	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
 	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	if (maxlvt >= 5)
 		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
 #endif
 
 	local_irq_save(flags);
 	disable_local_APIC();
-#ifdef CONFIG_INTR_REMAP
+
 	if (intr_remapping_enabled)
 		disable_intr_remapping();
-#endif
+
 	local_irq_restore(flags);
 	return 0;
 }
@@ -1982,42 +2037,34 @@ static int lapic_resume(struct sys_device *dev)
 	unsigned int l, h;
 	unsigned long flags;
 	int maxlvt;
-
-#ifdef CONFIG_INTR_REMAP
-	int ret;
+	int ret = 0;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 
 	if (!apic_pm_state.active)
 		return 0;
 
 	local_irq_save(flags);
-	if (x2apic) {
+	if (intr_remapping_enabled) {
 		ioapic_entries = alloc_ioapic_entries();
 		if (!ioapic_entries) {
 			WARN(1, "Alloc ioapic_entries in lapic resume failed.");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto restore;
 		}
 
 		ret = save_IO_APIC_setup(ioapic_entries);
 		if (ret) {
 			WARN(1, "Saving IO-APIC state failed: %d\n", ret);
 			free_ioapic_entries(ioapic_entries);
-			return ret;
+			goto restore;
 		}
 
 		mask_IO_APIC_setup(ioapic_entries);
 		mask_8259A();
-		enable_x2apic();
 	}
-#else
-	if (!apic_pm_state.active)
-		return 0;
 
-	local_irq_save(flags);
-	if (x2apic)
+	if (x2apic_mode)
 		enable_x2apic();
-#endif
-
 	else {
 		/*
 		 * Make sure the APICBASE points to the right address
@@ -2055,21 +2102,16 @@ static int lapic_resume(struct sys_device *dev)
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
 
-#ifdef CONFIG_INTR_REMAP
-	if (intr_remapping_enabled)
-		reenable_intr_remapping(EIM_32BIT_APIC_ID);
-
-	if (x2apic) {
+	if (intr_remapping_enabled) {
+		reenable_intr_remapping(x2apic_mode);
 		unmask_8259A();
 		restore_IO_APIC_setup(ioapic_entries);
 		free_ioapic_entries(ioapic_entries);
 	}
-#endif
-
+restore:
 	local_irq_restore(flags);
 
-
-	return 0;
+	return ret;
 }
 
 /*
@@ -2117,31 +2159,14 @@ static void apic_pm_activate(void) { }
 #endif	/* CONFIG_PM */
 
 #ifdef CONFIG_X86_64
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
+
+static int __cpuinit apic_cluster_num(void)
 {
 	int i, clusters, zeros;
 	unsigned id;
 	u16 *bios_cpu_apicid;
 	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
 
-	/*
-	 * there is not this kind of box with AMD CPU yet.
-	 * Some AMD box with quadcore cpu and 8 sockets apicid
-	 * will be [4, 0x23] or [8, 0x27] could be thought to
-	 * vsmp box still need checking...
-	 */
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
-		return 0;
-
 	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
@@ -2177,18 +2202,67 @@ __cpuinit int apic_is_clustered_box(void)
 			++zeros;
 	}
 
-	/* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
-	 * not guaranteed to be synced between boards
-	 */
-	if (is_vsmp_box() && clusters > 1)
+	return clusters;
+}
+
+static int __cpuinitdata multi_checked;
+static int __cpuinitdata multi;
+
+static int __cpuinit set_multi(const struct dmi_system_id *d)
+{
+	if (multi)
+		return 0;
+	pr_info("APIC: %s detected, Multi Chassis\n", d->ident);
+	multi = 1;
+	return 0;
+}
+
+static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = {
+	{
+		.callback = set_multi,
+		.ident = "IBM System Summit2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"),
+		},
+	},
+	{}
+};
+
+static void __cpuinit dmi_check_multi(void)
+{
+	if (multi_checked)
+		return;
+
+	dmi_check_system(multi_dmi_table);
+	multi_checked = 1;
+}
+
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis.
+ * Use DMI to check them
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+	dmi_check_multi();
+	if (multi)
 		return 1;
 
+	if (!is_vsmp_box())
+		return 0;
+
 	/*
-	 * If clusters > 2, then should be multi-chassis.
-	 * May have to revisit this when multi-core + hyperthreaded CPUs come
-	 * out, but AFAIK this will work even for them.
+	 * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+	 * not guaranteed to be synced between boards
 	 */
-	return (clusters > 2);
+	if (apic_cluster_num() > 1)
+		return 1;
+
+	return 0;
 }
 #endif
 
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 306e5e88fb6..d0c99abc26c 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -161,7 +161,7 @@ static int flat_apic_id_registered(void)
 
 static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
 {
-	return hard_smp_processor_id() >> index_msb;
+	return initial_apic_id >> index_msb;
 }
 
 struct apic apic_flat =  {
@@ -235,7 +235,7 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	 * regardless of how many processors are present (x86_64 ES7000
 	 * is an example).
 	 */
-	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
 		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
 		printk(KERN_DEBUG "system APIC only can use physical flat");
 		return 1;
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 1c11b819f24..69328ac8de9 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -145,7 +145,7 @@ es7000_rename_gsi(int ioapic, int gsi)
 	return gsi;
 }
 
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
+static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 {
 	unsigned long vect = 0, psaival = 0;
 
@@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr)
 }
 
 #ifdef CONFIG_ACPI
-static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
 	struct es7000_oem_table *table;
@@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
 	return 0;
 }
 
-static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 {
 	if (!oem_addr)
 		return;
@@ -306,7 +306,7 @@ static int es7000_check_dsdt(void)
 static int es7000_acpi_ret;
 
 /* Hook from generic ACPI tables.c */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	unsigned long oem_addr = 0;
 	int check_dsdt;
@@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
 
-struct apic apic_es7000 = {
+struct apic __refdata apic_es7000 = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 30da617d18e..ef8d9290c7e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -59,6 +59,7 @@
 #include <asm/setup.h>
 #include <asm/irq_remapping.h>
 #include <asm/hpet.h>
+#include <asm/hw_irq.h>
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_irq.h>
 
@@ -129,12 +130,9 @@ struct irq_pin_list {
 	struct irq_pin_list *next;
 };
 
-static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
+static struct irq_pin_list *get_one_free_irq_2_pin(int node)
 {
 	struct irq_pin_list *pin;
-	int node;
-
-	node = cpu_to_node(cpu);
 
 	pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
 
@@ -148,9 +146,6 @@ struct irq_cfg {
 	unsigned move_cleanup_count;
 	u8 vector;
 	u8 move_in_progress : 1;
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-	u8 move_desc_pending : 1;
-#endif
 };
 
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
@@ -182,16 +177,18 @@ int __init arch_early_irq_init(void)
 	struct irq_cfg *cfg;
 	struct irq_desc *desc;
 	int count;
+	int node;
 	int i;
 
 	cfg = irq_cfgx;
 	count = ARRAY_SIZE(irq_cfgx);
+	node= cpu_to_node(boot_cpu_id);
 
 	for (i = 0; i < count; i++) {
 		desc = irq_to_desc(i);
 		desc->chip_data = &cfg[i];
-		alloc_bootmem_cpumask_var(&cfg[i].domain);
-		alloc_bootmem_cpumask_var(&cfg[i].old_domain);
+		zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node);
+		zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node);
 		if (i < NR_IRQS_LEGACY)
 			cpumask_setall(cfg[i].domain);
 	}
@@ -212,12 +209,9 @@ static struct irq_cfg *irq_cfg(unsigned int irq)
 	return cfg;
 }
 
-static struct irq_cfg *get_one_free_irq_cfg(int cpu)
+static struct irq_cfg *get_one_free_irq_cfg(int node)
 {
 	struct irq_cfg *cfg;
-	int node;
-
-	node = cpu_to_node(cpu);
 
 	cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
 	if (cfg) {
@@ -238,13 +232,13 @@ static struct irq_cfg *get_one_free_irq_cfg(int cpu)
 	return cfg;
 }
 
-int arch_init_chip_data(struct irq_desc *desc, int cpu)
+int arch_init_chip_data(struct irq_desc *desc, int node)
 {
 	struct irq_cfg *cfg;
 
 	cfg = desc->chip_data;
 	if (!cfg) {
-		desc->chip_data = get_one_free_irq_cfg(cpu);
+		desc->chip_data = get_one_free_irq_cfg(node);
 		if (!desc->chip_data) {
 			printk(KERN_ERR "can not alloc irq_cfg\n");
 			BUG_ON(1);
@@ -254,10 +248,9 @@ int arch_init_chip_data(struct irq_desc *desc, int cpu)
 	return 0;
 }
 
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-
+/* for move_irq_desc */
 static void
-init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
+init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int node)
 {
 	struct irq_pin_list *old_entry, *head, *tail, *entry;
 
@@ -266,7 +259,7 @@ init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
 	if (!old_entry)
 		return;
 
-	entry = get_one_free_irq_2_pin(cpu);
+	entry = get_one_free_irq_2_pin(node);
 	if (!entry)
 		return;
 
@@ -276,7 +269,7 @@ init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
 	tail		= entry;
 	old_entry	= old_entry->next;
 	while (old_entry) {
-		entry = get_one_free_irq_2_pin(cpu);
+		entry = get_one_free_irq_2_pin(node);
 		if (!entry) {
 			entry = head;
 			while (entry) {
@@ -316,12 +309,12 @@ static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg)
 }
 
 void arch_init_copy_chip_data(struct irq_desc *old_desc,
-				 struct irq_desc *desc, int cpu)
+				 struct irq_desc *desc, int node)
 {
 	struct irq_cfg *cfg;
 	struct irq_cfg *old_cfg;
 
-	cfg = get_one_free_irq_cfg(cpu);
+	cfg = get_one_free_irq_cfg(node);
 
 	if (!cfg)
 		return;
@@ -332,7 +325,7 @@ void arch_init_copy_chip_data(struct irq_desc *old_desc,
 
 	memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
 
-	init_copy_irq_2_pin(old_cfg, cfg, cpu);
+	init_copy_irq_2_pin(old_cfg, cfg, node);
 }
 
 static void free_irq_cfg(struct irq_cfg *old_cfg)
@@ -356,19 +349,7 @@ void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
 		old_desc->chip_data = NULL;
 	}
 }
-
-static void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg = desc->chip_data;
-
-	if (!cfg->move_in_progress) {
-		/* it means that domain is not changed */
-		if (!cpumask_intersects(desc->affinity, mask))
-			cfg->move_desc_pending = 1;
-	}
-}
-#endif
+/* end for move_irq_desc */
 
 #else
 static struct irq_cfg *irq_cfg(unsigned int irq)
@@ -378,13 +359,6 @@ static struct irq_cfg *irq_cfg(unsigned int irq)
 
 #endif
 
-#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
-static inline void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-}
-#endif
-
 struct io_apic {
 	unsigned int index;
 	unsigned int unused[3];
@@ -518,132 +492,18 @@ static void ioapic_mask_entry(int apic, int pin)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-#ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
-{
-	cpumask_var_t cleanup_mask;
-
-	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
-		unsigned int i;
-		cfg->move_cleanup_count = 0;
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			cfg->move_cleanup_count++;
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
-	} else {
-		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
-		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
-		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		free_cpumask_var(cleanup_mask);
-	}
-	cfg->move_in_progress = 0;
-}
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
-	int apic, pin;
-	struct irq_pin_list *entry;
-	u8 vector = cfg->vector;
-
-	entry = cfg->irq_2_pin;
-	for (;;) {
-		unsigned int reg;
-
-		if (!entry)
-			break;
-
-		apic = entry->apic;
-		pin = entry->pin;
-		/*
-		 * With interrupt-remapping, destination information comes
-		 * from interrupt-remapping table entry.
-		 */
-		if (!irq_remapped(irq))
-			io_apic_write(apic, 0x11 + pin*2, dest);
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
-		reg |= vector;
-		io_apic_modify(apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = entry->next;
-	}
-}
-
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
-/*
- * Either sets desc->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
- * leaves desc->affinity untouched.
- */
-static unsigned int
-set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg;
-	unsigned int irq;
-
-	if (!cpumask_intersects(mask, cpu_online_mask))
-		return BAD_APICID;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-	if (assign_irq_vector(irq, cfg, mask))
-		return BAD_APICID;
-
-	/* check that before desc->addinity get updated */
-	set_extra_move_desc(desc, mask);
-
-	cpumask_copy(desc->affinity, mask);
-
-	return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
-}
-
-static void
-set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	unsigned int dest;
-	unsigned int irq;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	dest = set_desc_affinity(desc, mask);
-	if (dest != BAD_APICID) {
-		/* Only the high 8 bits are valid. */
-		dest = SET_APIC_LOGICAL_ID(dest);
-		__target_IO_APIC_irq(irq, dest, cfg);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void
-set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-
-	set_ioapic_affinity_irq_desc(desc, mask);
-}
-#endif /* CONFIG_SMP */
-
 /*
  * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
  * shared ISA-space IRQs, so we have to support them. We are super
  * fast in the common case, and fast for shared ISA-space IRQs.
  */
-static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
 {
 	struct irq_pin_list *entry;
 
 	entry = cfg->irq_2_pin;
 	if (!entry) {
-		entry = get_one_free_irq_2_pin(cpu);
+		entry = get_one_free_irq_2_pin(node);
 		if (!entry) {
 			printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
 					apic, pin);
@@ -663,7 +523,7 @@ static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
 		entry = entry->next;
 	}
 
-	entry->next = get_one_free_irq_2_pin(cpu);
+	entry->next = get_one_free_irq_2_pin(node);
 	entry = entry->next;
 	entry->apic = apic;
 	entry->pin = pin;
@@ -672,7 +532,7 @@ static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
 /*
  * Reroute an IRQ to a different pin.
  */
-static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
+static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 				      int oldapic, int oldpin,
 				      int newapic, int newpin)
 {
@@ -692,7 +552,7 @@ static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
 
 	/* why? call replace before add? */
 	if (!replaced)
-		add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
+		add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
 static inline void io_apic_modify_irq(struct irq_cfg *cfg,
@@ -850,7 +710,6 @@ static int __init ioapic_pirq_setup(char *str)
 __setup("pirq=", ioapic_pirq_setup);
 #endif /* CONFIG_X86_32 */
 
-#ifdef CONFIG_INTR_REMAP
 struct IO_APIC_route_entry **alloc_ioapic_entries(void)
 {
 	int apic;
@@ -948,20 +807,6 @@ int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries)
 	return 0;
 }
 
-void reinit_intr_remapped_IO_APIC(int intr_remapping,
-	struct IO_APIC_route_entry **ioapic_entries)
-
-{
-	/*
-	 * for now plain restore of previous settings.
-	 * TBD: In the case of OS enabling interrupt-remapping,
-	 * IO-APIC RTE's need to be setup to point to interrupt-remapping
-	 * table entries. for now, do a plain restore, and wait for
-	 * the setup_IO_APIC_irqs() to do proper initialization.
-	 */
-	restore_IO_APIC_setup(ioapic_entries);
-}
-
 void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries)
 {
 	int apic;
@@ -971,7 +816,6 @@ void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries)
 
 	kfree(ioapic_entries);
 }
-#endif
 
 /*
  * Find the IRQ entry number of a certain pin.
@@ -1032,54 +876,6 @@ static int __init find_isa_irq_apic(int irq, int type)
 	return -1;
 }
 
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
-	int apic, i, best_guess = -1;
-
-	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
-		bus, slot, pin);
-	if (test_bit(bus, mp_bus_not_pci)) {
-		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
-		return -1;
-	}
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].srcbus;
-
-		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
-			    mp_irqs[i].dstapic == MP_APIC_ALL)
-				break;
-
-		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].irqtype &&
-		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
-			if (!(apic || IO_APIC_IRQ(irq)))
-				continue;
-
-			if (pin == (mp_irqs[i].srcbusirq & 3))
-				return irq;
-			/*
-			 * Use the first all-but-pin matching entry as a
-			 * best-guess fuzzy result for broken mptables.
-			 */
-			if (best_guess < 0)
-				best_guess = irq;
-		}
-	}
-	return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 /*
  * EISA Edge/Level control register, ELCR
@@ -1298,6 +1094,64 @@ static int pin_2_irq(int idx, int apic, int pin)
 	return irq;
 }
 
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+				struct io_apic_irq_attr *irq_attr)
+{
+	int apic, i, best_guess = -1;
+
+	apic_printk(APIC_DEBUG,
+		    "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+		    bus, slot, pin);
+	if (test_bit(bus, mp_bus_not_pci)) {
+		apic_printk(APIC_VERBOSE,
+			    "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+		return -1;
+	}
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].srcbus;
+
+		for (apic = 0; apic < nr_ioapics; apic++)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+			    mp_irqs[i].dstapic == MP_APIC_ALL)
+				break;
+
+		if (!test_bit(lbus, mp_bus_not_pci) &&
+		    !mp_irqs[i].irqtype &&
+		    (bus == lbus) &&
+		    (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+			if (!(apic || IO_APIC_IRQ(irq)))
+				continue;
+
+			if (pin == (mp_irqs[i].srcbusirq & 3)) {
+				set_io_apic_irq_attr(irq_attr, apic,
+						     mp_irqs[i].dstirq,
+						     irq_trigger(i),
+						     irq_polarity(i));
+				return irq;
+			}
+			/*
+			 * Use the first all-but-pin matching entry as a
+			 * best-guess fuzzy result for broken mptables.
+			 */
+			if (best_guess < 0) {
+				set_io_apic_irq_attr(irq_attr, apic,
+						     mp_irqs[i].dstirq,
+						     irq_trigger(i),
+						     irq_polarity(i));
+				best_guess = irq;
+			}
+		}
+	}
+	return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
 void lock_vector_lock(void)
 {
 	/* Used to the online set of cpus does not change
@@ -1628,58 +1482,70 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
 	ioapic_write_entry(apic_id, pin, entry);
 }
 
+static struct {
+	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
 static void __init setup_IO_APIC_irqs(void)
 {
-	int apic_id, pin, idx, irq;
+	int apic_id = 0, pin, idx, irq;
 	int notcon = 0;
 	struct irq_desc *desc;
 	struct irq_cfg *cfg;
-	int cpu = boot_cpu_id;
+	int node = cpu_to_node(boot_cpu_id);
 
 	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 
-	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
-		for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
-
-			idx = find_irq_entry(apic_id, pin, mp_INT);
-			if (idx == -1) {
-				if (!notcon) {
-					notcon = 1;
-					apic_printk(APIC_VERBOSE,
-						KERN_DEBUG " %d-%d",
-						mp_ioapics[apic_id].apicid, pin);
-				} else
-					apic_printk(APIC_VERBOSE, " %d-%d",
-						mp_ioapics[apic_id].apicid, pin);
-				continue;
-			}
-			if (notcon) {
-				apic_printk(APIC_VERBOSE,
-					" (apicid-pin) not connected\n");
-				notcon = 0;
-			}
+#ifdef CONFIG_ACPI
+	if (!acpi_disabled && acpi_ioapic) {
+		apic_id = mp_find_ioapic(0);
+		if (apic_id < 0)
+			apic_id = 0;
+	}
+#endif
 
-			irq = pin_2_irq(idx, apic_id, pin);
+	for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+		idx = find_irq_entry(apic_id, pin, mp_INT);
+		if (idx == -1) {
+			if (!notcon) {
+				notcon = 1;
+				apic_printk(APIC_VERBOSE,
+					KERN_DEBUG " %d-%d",
+					mp_ioapics[apic_id].apicid, pin);
+			} else
+				apic_printk(APIC_VERBOSE, " %d-%d",
+					mp_ioapics[apic_id].apicid, pin);
+			continue;
+		}
+		if (notcon) {
+			apic_printk(APIC_VERBOSE,
+				" (apicid-pin) not connected\n");
+			notcon = 0;
+		}
 
-			/*
-			 * Skip the timer IRQ if there's a quirk handler
-			 * installed and if it returns 1:
-			 */
-			if (apic->multi_timer_check &&
-					apic->multi_timer_check(apic_id, irq))
-				continue;
+		irq = pin_2_irq(idx, apic_id, pin);
 
-			desc = irq_to_desc_alloc_cpu(irq, cpu);
-			if (!desc) {
-				printk(KERN_INFO "can not get irq_desc for %d\n", irq);
-				continue;
-			}
-			cfg = desc->chip_data;
-			add_pin_to_irq_cpu(cfg, cpu, apic_id, pin);
+		/*
+		 * Skip the timer IRQ if there's a quirk handler
+		 * installed and if it returns 1:
+		 */
+		if (apic->multi_timer_check &&
+				apic->multi_timer_check(apic_id, irq))
+			continue;
 
-			setup_IO_APIC_irq(apic_id, pin, irq, desc,
-					irq_trigger(idx), irq_polarity(idx));
+		desc = irq_to_desc_alloc_node(irq, node);
+		if (!desc) {
+			printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+			continue;
 		}
+		cfg = desc->chip_data;
+		add_pin_to_irq_node(cfg, node, apic_id, pin);
+		/*
+		 * don't mark it in pin_programmed, so later acpi could
+		 * set it correctly when irq < 16
+		 */
+		setup_IO_APIC_irq(apic_id, pin, irq, desc,
+				irq_trigger(idx), irq_polarity(idx));
 	}
 
 	if (notcon)
@@ -1869,7 +1735,7 @@ __apicdebuginit(void) print_APIC_bitfield(int base)
 
 __apicdebuginit(void) print_local_APIC(void *dummy)
 {
-	unsigned int v, ver, maxlvt;
+	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
 	if (apic_verbosity == APIC_QUIET)
@@ -1957,6 +1823,18 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
 	v = apic_read(APIC_TDCR);
 	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+
+	if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
+		v = apic_read(APIC_EFEAT);
+		maxlvt = (v >> 16) & 0xff;
+		printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v);
+		v = apic_read(APIC_ECTRL);
+		printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v);
+		for (i = 0; i < maxlvt; i++) {
+			v = apic_read(APIC_EILVTn(i));
+			printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
+		}
+	}
 	printk("\n");
 }
 
@@ -2005,6 +1883,11 @@ __apicdebuginit(void) print_PIC(void)
 __apicdebuginit(int) print_all_ICs(void)
 {
 	print_PIC();
+
+	/* don't print out if apic is not there */
+	if (!cpu_has_apic || disable_apic)
+		return 0;
+
 	print_all_local_APICs();
 	print_IO_APIC();
 
@@ -2360,6 +2243,118 @@ static int ioapic_retrigger_irq(unsigned int irq)
  */
 
 #ifdef CONFIG_SMP
+static void send_cleanup_vector(struct irq_cfg *cfg)
+{
+	cpumask_var_t cleanup_mask;
+
+	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
+		unsigned int i;
+		cfg->move_cleanup_count = 0;
+		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+			cfg->move_cleanup_count++;
+		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
+	} else {
+		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
+		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		free_cpumask_var(cleanup_mask);
+	}
+	cfg->move_in_progress = 0;
+}
+
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
+{
+	int apic, pin;
+	struct irq_pin_list *entry;
+	u8 vector = cfg->vector;
+
+	entry = cfg->irq_2_pin;
+	for (;;) {
+		unsigned int reg;
+
+		if (!entry)
+			break;
+
+		apic = entry->apic;
+		pin = entry->pin;
+		/*
+		 * With interrupt-remapping, destination information comes
+		 * from interrupt-remapping table entry.
+		 */
+		if (!irq_remapped(irq))
+			io_apic_write(apic, 0x11 + pin*2, dest);
+		reg = io_apic_read(apic, 0x10 + pin*2);
+		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+		reg |= vector;
+		io_apic_modify(apic, 0x10 + pin*2, reg);
+		if (!entry->next)
+			break;
+		entry = entry->next;
+	}
+}
+
+static int
+assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
+
+/*
+ * Either sets desc->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
+ * leaves desc->affinity untouched.
+ */
+static unsigned int
+set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
+{
+	struct irq_cfg *cfg;
+	unsigned int irq;
+
+	if (!cpumask_intersects(mask, cpu_online_mask))
+		return BAD_APICID;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+	if (assign_irq_vector(irq, cfg, mask))
+		return BAD_APICID;
+
+	cpumask_copy(desc->affinity, mask);
+
+	return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
+}
+
+static int
+set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	unsigned int dest;
+	unsigned int irq;
+	int ret = -1;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	dest = set_desc_affinity(desc, mask);
+	if (dest != BAD_APICID) {
+		/* Only the high 8 bits are valid. */
+		dest = SET_APIC_LOGICAL_ID(dest);
+		__target_IO_APIC_irq(irq, dest, cfg);
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return ret;
+}
+
+static int
+set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+
+	return set_ioapic_affinity_irq_desc(desc, mask);
+}
 
 #ifdef CONFIG_INTR_REMAP
 
@@ -2374,26 +2369,25 @@ static int ioapic_retrigger_irq(unsigned int irq)
  * Real vector that is used for interrupting cpu will be coming from
  * the interrupt-remapping table entry.
  */
-static void
+static int
 migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
 {
 	struct irq_cfg *cfg;
 	struct irte irte;
 	unsigned int dest;
 	unsigned int irq;
+	int ret = -1;
 
 	if (!cpumask_intersects(mask, cpu_online_mask))
-		return;
+		return ret;
 
 	irq = desc->irq;
 	if (get_irte(irq, &irte))
-		return;
+		return ret;
 
 	cfg = desc->chip_data;
 	if (assign_irq_vector(irq, cfg, mask))
-		return;
-
-	set_extra_move_desc(desc, mask);
+		return ret;
 
 	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
 
@@ -2409,27 +2403,30 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
 		send_cleanup_vector(cfg);
 
 	cpumask_copy(desc->affinity, mask);
+
+	return 0;
 }
 
 /*
  * Migrates the IRQ destination in the process context.
  */
-static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+static int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
 					    const struct cpumask *mask)
 {
-	migrate_ioapic_irq_desc(desc, mask);
+	return migrate_ioapic_irq_desc(desc, mask);
 }
-static void set_ir_ioapic_affinity_irq(unsigned int irq,
+static int set_ir_ioapic_affinity_irq(unsigned int irq,
 				       const struct cpumask *mask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 
-	set_ir_ioapic_affinity_irq_desc(desc, mask);
+	return set_ir_ioapic_affinity_irq_desc(desc, mask);
 }
 #else
-static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+static inline int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
 						   const struct cpumask *mask)
 {
+	return 0;
 }
 #endif
 
@@ -2491,86 +2488,19 @@ static void irq_complete_move(struct irq_desc **descp)
 	struct irq_cfg *cfg = desc->chip_data;
 	unsigned vector, me;
 
-	if (likely(!cfg->move_in_progress)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-		if (likely(!cfg->move_desc_pending))
-			return;
-
-		/* domain has not changed, but affinity did */
-		me = smp_processor_id();
-		if (cpumask_test_cpu(me, desc->affinity)) {
-			*descp = desc = move_irq_desc(desc, me);
-			/* get the new one */
-			cfg = desc->chip_data;
-			cfg->move_desc_pending = 0;
-		}
-#endif
+	if (likely(!cfg->move_in_progress))
 		return;
-	}
 
 	vector = ~get_irq_regs()->orig_ax;
 	me = smp_processor_id();
 
-	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-		*descp = desc = move_irq_desc(desc, me);
-		/* get the new one */
-		cfg = desc->chip_data;
-#endif
+	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 		send_cleanup_vector(cfg);
-	}
 }
 #else
 static inline void irq_complete_move(struct irq_desc **descp) {}
 #endif
 
-static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
-	int apic, pin;
-	struct irq_pin_list *entry;
-
-	entry = cfg->irq_2_pin;
-	for (;;) {
-
-		if (!entry)
-			break;
-
-		apic = entry->apic;
-		pin = entry->pin;
-		io_apic_eoi(apic, pin);
-		entry = entry->next;
-	}
-}
-
-static void
-eoi_ioapic_irq(struct irq_desc *desc)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	unsigned int irq;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__eoi_ioapic_irq(irq, cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_X86_X2APIC
-static void ack_x2apic_level(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	ack_x2APIC_irq();
-	eoi_ioapic_irq(desc);
-}
-
-static void ack_x2apic_edge(unsigned int irq)
-{
-	ack_x2APIC_irq();
-}
-#endif
-
 static void ack_apic_edge(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -2634,9 +2564,6 @@ static void ack_apic_level(unsigned int irq)
 	 */
 	ack_APIC_irq();
 
-	if (irq_remapped(irq))
-		eoi_ioapic_irq(desc);
-
 	/* Now we can move and renable the irq */
 	if (unlikely(do_unmask_irq)) {
 		/* Only migrate the irq if the ack has been received.
@@ -2683,22 +2610,50 @@ static void ack_apic_level(unsigned int irq)
 }
 
 #ifdef CONFIG_INTR_REMAP
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+	int apic, pin;
+	struct irq_pin_list *entry;
+
+	entry = cfg->irq_2_pin;
+	for (;;) {
+
+		if (!entry)
+			break;
+
+		apic = entry->apic;
+		pin = entry->pin;
+		io_apic_eoi(apic, pin);
+		entry = entry->next;
+	}
+}
+
+static void
+eoi_ioapic_irq(struct irq_desc *desc)
+{
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	unsigned int irq;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__eoi_ioapic_irq(irq, cfg);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
 static void ir_ack_apic_edge(unsigned int irq)
 {
-#ifdef CONFIG_X86_X2APIC
-       if (x2apic_enabled())
-               return ack_x2apic_edge(irq);
-#endif
-       return ack_apic_edge(irq);
+	ack_APIC_irq();
 }
 
 static void ir_ack_apic_level(unsigned int irq)
 {
-#ifdef CONFIG_X86_X2APIC
-       if (x2apic_enabled())
-               return ack_x2apic_level(irq);
-#endif
-       return ack_apic_level(irq);
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	ack_APIC_irq();
+	eoi_ioapic_irq(desc);
 }
 #endif /* CONFIG_INTR_REMAP */
 
@@ -2903,7 +2858,7 @@ static inline void __init check_timer(void)
 {
 	struct irq_desc *desc = irq_to_desc(0);
 	struct irq_cfg *cfg = desc->chip_data;
-	int cpu = boot_cpu_id;
+	int node = cpu_to_node(boot_cpu_id);
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
 	int no_pin1 = 0;
@@ -2969,7 +2924,7 @@ static inline void __init check_timer(void)
 		 * Ok, does IRQ0 through the IOAPIC work?
 		 */
 		if (no_pin1) {
-			add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
+			add_pin_to_irq_node(cfg, node, apic1, pin1);
 			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
 		} else {
 			/* for edge trigger, setup_IO_APIC_irq already
@@ -3006,7 +2961,7 @@ static inline void __init check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
+		replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
 		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
 		enable_8259A_irq(0);
 		if (timer_irq_works()) {
@@ -3218,14 +3173,13 @@ static int nr_irqs_gsi = NR_IRQS_LEGACY;
 /*
  * Dynamic irq allocate and deallocation
  */
-unsigned int create_irq_nr(unsigned int irq_want)
+unsigned int create_irq_nr(unsigned int irq_want, int node)
 {
 	/* Allocate an unused irq */
 	unsigned int irq;
 	unsigned int new;
 	unsigned long flags;
 	struct irq_cfg *cfg_new = NULL;
-	int cpu = boot_cpu_id;
 	struct irq_desc *desc_new = NULL;
 
 	irq = 0;
@@ -3234,7 +3188,7 @@ unsigned int create_irq_nr(unsigned int irq_want)
 
 	spin_lock_irqsave(&vector_lock, flags);
 	for (new = irq_want; new < nr_irqs; new++) {
-		desc_new = irq_to_desc_alloc_cpu(new, cpu);
+		desc_new = irq_to_desc_alloc_node(new, node);
 		if (!desc_new) {
 			printk(KERN_INFO "can not get irq_desc for %d\n", new);
 			continue;
@@ -3243,6 +3197,9 @@ unsigned int create_irq_nr(unsigned int irq_want)
 
 		if (cfg_new->vector != 0)
 			continue;
+
+		desc_new = move_irq_desc(desc_new, node);
+
 		if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
 			irq = new;
 		break;
@@ -3260,11 +3217,12 @@ unsigned int create_irq_nr(unsigned int irq_want)
 
 int create_irq(void)
 {
+	int node = cpu_to_node(boot_cpu_id);
 	unsigned int irq_want;
 	int irq;
 
 	irq_want = nr_irqs_gsi;
-	irq = create_irq_nr(irq_want);
+	irq = create_irq_nr(irq_want, node);
 
 	if (irq == 0)
 		irq = -1;
@@ -3366,7 +3324,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 }
 
 #ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
+static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irq_cfg *cfg;
@@ -3375,7 +3333,7 @@ static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dest = set_desc_affinity(desc, mask);
 	if (dest == BAD_APICID)
-		return;
+		return -1;
 
 	cfg = desc->chip_data;
 
@@ -3387,13 +3345,15 @@ static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
 
 	write_msi_msg_desc(desc, &msg);
+
+	return 0;
 }
 #ifdef CONFIG_INTR_REMAP
 /*
  * Migrate the MSI irq to another cpumask. This migration is
  * done in the process context using interrupt-remapping hardware.
  */
-static void
+static int
 ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -3402,11 +3362,11 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 	struct irte irte;
 
 	if (get_irte(irq, &irte))
-		return;
+		return -1;
 
 	dest = set_desc_affinity(desc, mask);
 	if (dest == BAD_APICID)
-		return;
+		return -1;
 
 	irte.vector = cfg->vector;
 	irte.dest_id = IRTE_DEST(dest);
@@ -3423,6 +3383,8 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 	 */
 	if (cfg->move_in_progress)
 		send_cleanup_vector(cfg);
+
+	return 0;
 }
 
 #endif
@@ -3518,15 +3480,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	unsigned int irq_want;
 	struct intel_iommu *iommu = NULL;
 	int index = 0;
+	int node;
 
 	/* x86 doesn't support multiple MSI yet */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	node = dev_to_node(&dev->dev);
 	irq_want = nr_irqs_gsi;
 	sub_handle = 0;
 	list_for_each_entry(msidesc, &dev->msi_list, list) {
-		irq = create_irq_nr(irq_want);
+		irq = create_irq_nr(irq_want, node);
 		if (irq == 0)
 			return -1;
 		irq_want = irq + 1;
@@ -3576,7 +3540,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 #if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP)
 #ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irq_cfg *cfg;
@@ -3585,7 +3549,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dest = set_desc_affinity(desc, mask);
 	if (dest == BAD_APICID)
-		return;
+		return -1;
 
 	cfg = desc->chip_data;
 
@@ -3597,6 +3561,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
 
 	dmar_msi_write(irq, &msg);
+
+	return 0;
 }
 
 #endif /* CONFIG_SMP */
@@ -3630,7 +3596,7 @@ int arch_setup_dmar_msi(unsigned int irq)
 #ifdef CONFIG_HPET_TIMER
 
 #ifdef CONFIG_SMP
-static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irq_cfg *cfg;
@@ -3639,7 +3605,7 @@ static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dest = set_desc_affinity(desc, mask);
 	if (dest == BAD_APICID)
-		return;
+		return -1;
 
 	cfg = desc->chip_data;
 
@@ -3651,6 +3617,8 @@ static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
 
 	hpet_msi_write(irq, &msg);
+
+	return 0;
 }
 
 #endif /* CONFIG_SMP */
@@ -3707,7 +3675,7 @@ static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
 	write_ht_irq_msg(irq, &msg);
 }
 
-static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
+static int set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irq_cfg *cfg;
@@ -3715,11 +3683,13 @@ static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dest = set_desc_affinity(desc, mask);
 	if (dest == BAD_APICID)
-		return;
+		return -1;
 
 	cfg = desc->chip_data;
 
 	target_ht_irq(irq, dest, cfg->vector);
+
+	return 0;
 }
 
 #endif
@@ -3794,6 +3764,8 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	unsigned long flags;
 	int err;
 
+	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
 	cfg = irq_cfg(irq);
 
 	err = assign_irq_vector(irq, cfg, eligible_cpu);
@@ -3807,15 +3779,13 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 
 	mmr_value = 0;
 	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	entry->vector = cfg->vector;
-	entry->delivery_mode = apic->irq_delivery_mode;
-	entry->dest_mode = apic->irq_dest_mode;
-	entry->polarity = 0;
-	entry->trigger = 0;
-	entry->mask = 0;
-	entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
+	entry->vector		= cfg->vector;
+	entry->delivery_mode	= apic->irq_delivery_mode;
+	entry->dest_mode	= apic->irq_dest_mode;
+	entry->polarity		= 0;
+	entry->trigger		= 0;
+	entry->mask		= 0;
+	entry->dest		= apic->cpu_mask_to_apicid(eligible_cpu);
 
 	mmr_pnode = uv_blade_to_pnode(mmr_blade);
 	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
@@ -3833,10 +3803,10 @@ void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
 	struct uv_IO_APIC_route_entry *entry;
 	int mmr_pnode;
 
+	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
 	mmr_value = 0;
 	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
 	entry->mask = 1;
 
 	mmr_pnode = uv_blade_to_pnode(mmr_blade);
@@ -3900,6 +3870,71 @@ int __init arch_probe_nr_irqs(void)
 }
 #endif
 
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+				struct io_apic_irq_attr *irq_attr)
+{
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+	int node;
+	int ioapic, pin;
+	int trigger, polarity;
+
+	ioapic = irq_attr->ioapic;
+	if (!IO_APIC_IRQ(irq)) {
+		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+			ioapic);
+		return -EINVAL;
+	}
+
+	if (dev)
+		node = dev_to_node(dev);
+	else
+		node = cpu_to_node(boot_cpu_id);
+
+	desc = irq_to_desc_alloc_node(irq, node);
+	if (!desc) {
+		printk(KERN_INFO "can not get irq_desc %d\n", irq);
+		return 0;
+	}
+
+	pin = irq_attr->ioapic_pin;
+	trigger = irq_attr->trigger;
+	polarity = irq_attr->polarity;
+
+	/*
+	 * IRQs < 16 are already in the irq_2_pin[] map
+	 */
+	if (irq >= NR_IRQS_LEGACY) {
+		cfg = desc->chip_data;
+		add_pin_to_irq_node(cfg, node, ioapic, pin);
+	}
+
+	setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
+
+	return 0;
+}
+
+int io_apic_set_pci_routing(struct device *dev, int irq,
+				struct io_apic_irq_attr *irq_attr)
+{
+	int ioapic, pin;
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
+	 * with redundant pin->gsi mappings (but unique PCI devices);
+	 * we only program the IOAPIC on the first.
+	 */
+	ioapic = irq_attr->ioapic;
+	pin = irq_attr->ioapic_pin;
+	if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+		pr_debug("Pin %d-%d already programmed\n",
+			 mp_ioapics[ioapic].apicid, pin);
+		return 0;
+	}
+	set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+	return __io_apic_set_pci_routing(dev, irq, irq_attr);
+}
+
 /* --------------------------------------------------------------------------
                           ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
@@ -3980,6 +4015,7 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 
 	return apic_id;
 }
+#endif
 
 int __init io_apic_get_version(int ioapic)
 {
@@ -3992,39 +4028,6 @@ int __init io_apic_get_version(int ioapic)
 
 	return reg_01.bits.version;
 }
-#endif
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
-	struct irq_desc *desc;
-	struct irq_cfg *cfg;
-	int cpu = boot_cpu_id;
-
-	if (!IO_APIC_IRQ(irq)) {
-		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
-			ioapic);
-		return -EINVAL;
-	}
-
-	desc = irq_to_desc_alloc_cpu(irq, cpu);
-	if (!desc) {
-		printk(KERN_INFO "can not get irq_desc %d\n", irq);
-		return 0;
-	}
-
-	/*
-	 * IRQs < 16 are already in the irq_2_pin[] map
-	 */
-	if (irq >= NR_IRQS_LEGACY) {
-		cfg = desc->chip_data;
-		add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
-	}
-
-	setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
-	return 0;
-}
-
 
 int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 {
@@ -4055,51 +4058,44 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 #ifdef CONFIG_SMP
 void __init setup_ioapic_dest(void)
 {
-	int pin, ioapic, irq, irq_entry;
+	int pin, ioapic = 0, irq, irq_entry;
 	struct irq_desc *desc;
-	struct irq_cfg *cfg;
 	const struct cpumask *mask;
 
 	if (skip_ioapic_setup == 1)
 		return;
 
-	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
-		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
-			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
-			if (irq_entry == -1)
-				continue;
-			irq = pin_2_irq(irq_entry, ioapic, pin);
-
-			/* setup_IO_APIC_irqs could fail to get vector for some device
-			 * when you have too many devices, because at that time only boot
-			 * cpu is online.
-			 */
-			desc = irq_to_desc(irq);
-			cfg = desc->chip_data;
-			if (!cfg->vector) {
-				setup_IO_APIC_irq(ioapic, pin, irq, desc,
-						  irq_trigger(irq_entry),
-						  irq_polarity(irq_entry));
-				continue;
+#ifdef CONFIG_ACPI
+	if (!acpi_disabled && acpi_ioapic) {
+		ioapic = mp_find_ioapic(0);
+		if (ioapic < 0)
+			ioapic = 0;
+	}
+#endif
 
-			}
+	for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+		irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+		if (irq_entry == -1)
+			continue;
+		irq = pin_2_irq(irq_entry, ioapic, pin);
 
-			/*
-			 * Honour affinities which have been set in early boot
-			 */
-			if (desc->status &
-			    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
-				mask = desc->affinity;
-			else
-				mask = apic->target_cpus();
+		desc = irq_to_desc(irq);
 
-			if (intr_remapping_enabled)
-				set_ir_ioapic_affinity_irq_desc(desc, mask);
-			else
-				set_ioapic_affinity_irq_desc(desc, mask);
-		}
+		/*
+		 * Honour affinities which have been set in early boot
+		 */
+		if (desc->status &
+		    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+			mask = desc->affinity;
+		else
+			mask = apic->target_cpus();
 
+		if (intr_remapping_enabled)
+			set_ir_ioapic_affinity_irq_desc(desc, mask);
+		else
+			set_ioapic_affinity_irq_desc(desc, mask);
 	}
+
 }
 #endif
 
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index ce4fbfa315a..b3025b43b63 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -66,7 +66,7 @@ static inline unsigned int get_nmi_count(int cpu)
 
 static inline int mce_in_progress(void)
 {
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#if defined(CONFIG_X86_NEW_MCE)
 	return atomic_read(&mce_entry) > 0;
 #endif
 	return 0;
@@ -104,7 +104,7 @@ static __init void nmi_cpu_busy(void *data)
 }
 #endif
 
-static void report_broken_nmi(int cpu, int *prev_nmi_count)
+static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count)
 {
 	printk(KERN_CONT "\n");
 
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 01eda2ac65e..440a8bccd91 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -160,7 +160,6 @@ extern struct apic apic_summit;
 extern struct apic apic_bigsmp;
 extern struct apic apic_es7000;
 extern struct apic apic_es7000_cluster;
-extern struct apic apic_default;
 
 struct apic *apic = &apic_default;
 EXPORT_SYMBOL_GPL(apic);
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 1783652bb0e..bc3e880f9b8 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,7 +50,7 @@ static struct apic *apic_probe[] __initdata = {
 void __init default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_X2APIC
-	if (x2apic && (apic != &apic_x2apic_phys &&
+	if (x2apic_mode && (apic != &apic_x2apic_phys &&
 #ifdef CONFIG_X86_UV
 		       apic != &apic_x2apic_uv_x &&
 #endif
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 9cfe1f415d8..344eee4ac0a 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -173,13 +173,6 @@ static inline int is_WPEG(struct rio_detail *rio){
 		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
 }
 
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
 #define SUMMIT_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
 
 static const struct cpumask *summit_target_cpus(void)
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 4a903e2f0d1..8e4cbb255c3 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -10,7 +10,7 @@
 #include <asm/apic.h>
 #include <asm/ipi.h>
 
-DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 2bda6935297..ef0ae207a7c 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -105,7 +105,7 @@ static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
 	cpumask_set_cpu(cpu, retmask);
 }
 
-static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
+static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
 {
 #ifdef CONFIG_SMP
 	unsigned long val;
@@ -562,7 +562,7 @@ void __init uv_system_init(void)
 	union uvh_node_id_u node_id;
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
 	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
-	int max_pnode = 0;
+	int gnode_extra, max_pnode = 0;
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 
@@ -574,6 +574,13 @@ void __init uv_system_init(void)
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
+	pnode_mask = (1 << n_val) - 1;
+	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+	gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1;
+	gnode_upper = ((unsigned long)gnode_extra  << m_val);
+	printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n",
+			n_val, m_val, gnode_upper, gnode_extra);
+
 	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
 
 	for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
@@ -583,15 +590,18 @@ void __init uv_system_init(void)
 
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
 	uv_blade_info = kmalloc(bytes, GFP_KERNEL);
+	BUG_ON(!uv_blade_info);
 
 	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
 
 	bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
 	uv_node_to_blade = kmalloc(bytes, GFP_KERNEL);
+	BUG_ON(!uv_node_to_blade);
 	memset(uv_node_to_blade, 255, bytes);
 
 	bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
 	uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL);
+	BUG_ON(!uv_cpu_to_blade);
 	memset(uv_cpu_to_blade, 255, bytes);
 
 	blade = 0;
@@ -607,11 +617,6 @@ void __init uv_system_init(void)
 		}
 	}
 
-	pnode_mask = (1 << n_val) - 1;
-	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
-	gnode_upper = (((unsigned long)node_id.s.node_id) &
-		       ~((1 << n_val) - 1)) << m_val;
-
 	uv_bios_init();
 	uv_bios_get_sn_info(0, &uv_type, &sn_partition_id,
 			    &sn_coherency_id, &sn_region_size);
@@ -634,6 +639,7 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+		uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
 		uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id;
 		uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu;
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 49e0939bac4..79302e9a33a 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1233,9 +1233,9 @@ static int suspend(int vetoable)
 	int err;
 	struct apm_user	*as;
 
-	device_suspend(PMSG_SUSPEND);
+	dpm_suspend_start(PMSG_SUSPEND);
 
-	device_power_down(PMSG_SUSPEND);
+	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
@@ -1259,9 +1259,9 @@ static int suspend(int vetoable)
 	sysdev_resume();
 	local_irq_enable();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1277,7 +1277,7 @@ static void standby(void)
 {
 	int err;
 
-	device_power_down(PMSG_SUSPEND);
+	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
@@ -1291,7 +1291,7 @@ static void standby(void)
 	sysdev_resume();
 	local_irq_enable();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 }
 
 static apm_event_t get_event(void)
@@ -1376,7 +1376,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume(PMSG_RESUME);
+				dpm_resume_end(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 5a6aa1c1162..dfdbf640389 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -126,6 +126,7 @@ void foo(void)
 #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
 	BLANK();
 	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
+	OFFSET(LGUEST_DATA_irq_pending, lguest_data, irq_pending);
 	OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir);
 
 	BLANK();
@@ -146,4 +147,5 @@ void foo(void)
 	OFFSET(BP_loadflags, boot_params, hdr.loadflags);
 	OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
 	OFFSET(BP_version, boot_params, hdr.version);
+	OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
 }
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index e72f062fb4b..898ecc47e12 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -125,6 +125,7 @@ int main(void)
 	OFFSET(BP_loadflags, boot_params, hdr.loadflags);
 	OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
 	OFFSET(BP_version, boot_params, hdr.version);
+	OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
 
 	BLANK();
 	DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 4e242f9a06e..3efcb2b96a1 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile for x86-compatible CPU details and quirks
+# Makefile for x86-compatible CPU details, features and quirks
 #
 
 # Don't trace early stages of a secondary CPU boot
@@ -23,11 +23,13 @@ obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
 obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
 obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
 
-obj-$(CONFIG_X86_MCE)	+= mcheck/
-obj-$(CONFIG_MTRR)	+= mtrr/
-obj-$(CONFIG_CPU_FREQ)	+= cpufreq/
+obj-$(CONFIG_PERF_COUNTERS)		+= perf_counter.o
 
-obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+obj-$(CONFIG_X86_MCE)			+= mcheck/
+obj-$(CONFIG_MTRR)			+= mtrr/
+obj-$(CONFIG_CPU_FREQ)			+= cpufreq/
+
+obj-$(CONFIG_X86_LOCAL_APIC)		+= perfctr-watchdog.o
 
 quiet_cmd_mkcapflags = MKCAP   $@
       cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 7e4a459daa6..e5b27d8f1b4 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -6,6 +6,7 @@
 #include <asm/processor.h>
 #include <asm/apic.h>
 #include <asm/cpu.h>
+#include <asm/pci-direct.h>
 
 #ifdef CONFIG_X86_64
 # include <asm/numa_64.h>
@@ -272,7 +273,7 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	int cpu = smp_processor_id();
 	int node;
-	unsigned apicid = hard_smp_processor_id();
+	unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
 
 	node = c->phys_proc_id;
 	if (apicid_to_node[apicid] != NUMA_NO_NODE)
@@ -351,6 +352,15 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 		    (c->x86_model == 8 && c->x86_mask >= 8))
 			set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 #endif
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
+	/* check CPU config space for extended APIC ID */
+	if (c->x86 >= 0xf) {
+		unsigned int val;
+		val = read_pci_config(0, 24, 0, 0x68);
+		if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
+			set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
+	}
+#endif
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c1caefc82e6..3ffdcfa9abd 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 
 #include <asm/stackprotector.h>
+#include <asm/perf_counter.h>
 #include <asm/mmu_context.h>
 #include <asm/hypervisor.h>
 #include <asm/processor.h>
@@ -114,6 +115,13 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
+static int __init x86_xsave_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
+	return 1;
+}
+__setup("noxsave", x86_xsave_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;
@@ -292,7 +300,8 @@ static const char *__cpuinit table_lookup_model(struct cpuinfo_x86 *c)
 	return NULL;		/* Not found */
 }
 
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+__u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata;
+__u32 cpu_caps_set[NCAPINTS] __cpuinitdata;
 
 void load_percpu_segment(int cpu)
 {
@@ -761,6 +770,12 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	if (this_cpu->c_identify)
 		this_cpu->c_identify(c);
 
+	/* Clear/Set all flags overriden by options, after probe */
+	for (i = 0; i < NCAPINTS; i++) {
+		c->x86_capability[i] &= ~cpu_caps_cleared[i];
+		c->x86_capability[i] |= cpu_caps_set[i];
+	}
+
 #ifdef CONFIG_X86_64
 	c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
 #endif
@@ -806,6 +821,16 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #endif
 
 	init_hypervisor(c);
+
+	/*
+	 * Clear/Set all flags overriden by options, need do it
+	 * before following smp all cpus cap AND.
+	 */
+	for (i = 0; i < NCAPINTS; i++) {
+		c->x86_capability[i] &= ~cpu_caps_cleared[i];
+		c->x86_capability[i] |= cpu_caps_set[i];
+	}
+
 	/*
 	 * On SMP, boot_cpu_data holds the common feature set between
 	 * all CPUs; so make sure that we indicate which features are
@@ -818,10 +843,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
-	/* Clear all flags overriden by options */
-	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
 #ifdef CONFIG_X86_MCE
 	/* Init Machine Check Exception if available. */
 	mcheck_init(c);
@@ -854,6 +875,7 @@ void __init identify_boot_cpu(void)
 #else
 	vgetcpu_set_mode();
 #endif
+	init_hw_perf_counters();
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
index 46e29ab96c6..6b2a52dd040 100644
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ b/arch/x86/kernel/cpu/cpu_debug.c
@@ -32,9 +32,7 @@
 
 static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]);
 static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]);
-static DEFINE_PER_CPU(unsigned, cpu_modelflag);
 static DEFINE_PER_CPU(int, cpu_priv_count);
-static DEFINE_PER_CPU(unsigned, cpu_model);
 
 static DEFINE_MUTEX(cpu_debug_lock);
 
@@ -80,302 +78,102 @@ static struct cpu_file_base cpu_file[] = {
 	{ "value",	CPU_REG_ALL,	1	},
 };
 
-/* Intel Registers Range */
-static struct cpu_debug_range cpu_intel_range[] = {
-	{ 0x00000000, 0x00000001, CPU_MC,	CPU_INTEL_ALL		},
-	{ 0x00000006, 0x00000007, CPU_MONITOR,	CPU_CX_AT_XE		},
-	{ 0x00000010, 0x00000010, CPU_TIME,	CPU_INTEL_ALL		},
-	{ 0x00000011, 0x00000013, CPU_PMC,	CPU_INTEL_PENTIUM	},
-	{ 0x00000017, 0x00000017, CPU_PLATFORM,	CPU_PX_CX_AT_XE		},
-	{ 0x0000001B, 0x0000001B, CPU_APIC,	CPU_P6_CX_AT_XE		},
-
-	{ 0x0000002A, 0x0000002A, CPU_POWERON,	CPU_PX_CX_AT_XE		},
-	{ 0x0000002B, 0x0000002B, CPU_POWERON,	CPU_INTEL_XEON		},
-	{ 0x0000002C, 0x0000002C, CPU_FREQ,	CPU_INTEL_XEON		},
-	{ 0x0000003A, 0x0000003A, CPU_CONTROL,	CPU_CX_AT_XE		},
-
-	{ 0x00000040, 0x00000043, CPU_LBRANCH,	CPU_PM_CX_AT_XE		},
-	{ 0x00000044, 0x00000047, CPU_LBRANCH,	CPU_PM_CO_AT		},
-	{ 0x00000060, 0x00000063, CPU_LBRANCH,	CPU_C2_AT		},
-	{ 0x00000064, 0x00000067, CPU_LBRANCH,	CPU_INTEL_ATOM		},
-
-	{ 0x00000079, 0x00000079, CPU_BIOS,	CPU_P6_CX_AT_XE		},
-	{ 0x00000088, 0x0000008A, CPU_CACHE,	CPU_INTEL_P6		},
-	{ 0x0000008B, 0x0000008B, CPU_BIOS,	CPU_P6_CX_AT_XE		},
-	{ 0x0000009B, 0x0000009B, CPU_MONITOR,	CPU_INTEL_XEON		},
-
-	{ 0x000000C1, 0x000000C2, CPU_PMC,	CPU_P6_CX_AT		},
-	{ 0x000000CD, 0x000000CD, CPU_FREQ,	CPU_CX_AT		},
-	{ 0x000000E7, 0x000000E8, CPU_PERF,	CPU_CX_AT		},
-	{ 0x000000FE, 0x000000FE, CPU_MTRR,	CPU_P6_CX_XE		},
-
-	{ 0x00000116, 0x00000116, CPU_CACHE,	CPU_INTEL_P6		},
-	{ 0x00000118, 0x00000118, CPU_CACHE,	CPU_INTEL_P6		},
-	{ 0x00000119, 0x00000119, CPU_CACHE,	CPU_INTEL_PX		},
-	{ 0x0000011A, 0x0000011B, CPU_CACHE,	CPU_INTEL_P6		},
-	{ 0x0000011E, 0x0000011E, CPU_CACHE,	CPU_PX_CX_AT		},
-
-	{ 0x00000174, 0x00000176, CPU_SYSENTER,	CPU_P6_CX_AT_XE		},
-	{ 0x00000179, 0x0000017A, CPU_MC,	CPU_PX_CX_AT_XE		},
-	{ 0x0000017B, 0x0000017B, CPU_MC,	CPU_P6_XE		},
-	{ 0x00000186, 0x00000187, CPU_PMC,	CPU_P6_CX_AT		},
-	{ 0x00000198, 0x00000199, CPU_PERF,	CPU_PM_CX_AT_XE		},
-	{ 0x0000019A, 0x0000019A, CPU_TIME,	CPU_PM_CX_AT_XE		},
-	{ 0x0000019B, 0x0000019D, CPU_THERM,	CPU_PM_CX_AT_XE		},
-	{ 0x000001A0, 0x000001A0, CPU_MISC,	CPU_PM_CX_AT_XE		},
-
-	{ 0x000001C9, 0x000001C9, CPU_LBRANCH,	CPU_PM_CX_AT		},
-	{ 0x000001D7, 0x000001D8, CPU_LBRANCH,	CPU_INTEL_XEON		},
-	{ 0x000001D9, 0x000001D9, CPU_DEBUG,	CPU_CX_AT_XE		},
-	{ 0x000001DA, 0x000001DA, CPU_LBRANCH,	CPU_INTEL_XEON		},
-	{ 0x000001DB, 0x000001DB, CPU_LBRANCH,	CPU_P6_XE		},
-	{ 0x000001DC, 0x000001DC, CPU_LBRANCH,	CPU_INTEL_P6		},
-	{ 0x000001DD, 0x000001DE, CPU_LBRANCH,	CPU_PX_CX_AT_XE		},
-	{ 0x000001E0, 0x000001E0, CPU_LBRANCH,	CPU_INTEL_P6		},
-
-	{ 0x00000200, 0x0000020F, CPU_MTRR,	CPU_P6_CX_XE		},
-	{ 0x00000250, 0x00000250, CPU_MTRR,	CPU_P6_CX_XE		},
-	{ 0x00000258, 0x00000259, CPU_MTRR,	CPU_P6_CX_XE		},
-	{ 0x00000268, 0x0000026F, CPU_MTRR,	CPU_P6_CX_XE		},
-	{ 0x00000277, 0x00000277, CPU_PAT,	CPU_C2_AT_XE		},
-	{ 0x000002FF, 0x000002FF, CPU_MTRR,	CPU_P6_CX_XE		},
-
-	{ 0x00000300, 0x00000308, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x00000309, 0x0000030B, CPU_PMC,	CPU_C2_AT_XE		},
-	{ 0x0000030C, 0x00000311, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x00000345, 0x00000345, CPU_PMC,	CPU_C2_AT		},
-	{ 0x00000360, 0x00000371, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x0000038D, 0x00000390, CPU_PMC,	CPU_C2_AT		},
-	{ 0x000003A0, 0x000003BE, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x000003C0, 0x000003CD, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x000003E0, 0x000003E1, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x000003F0, 0x000003F0, CPU_PMC,	CPU_INTEL_XEON		},
-	{ 0x000003F1, 0x000003F1, CPU_PMC,	CPU_C2_AT_XE		},
-	{ 0x000003F2, 0x000003F2, CPU_PMC,	CPU_INTEL_XEON		},
-
-	{ 0x00000400, 0x00000402, CPU_MC,	CPU_PM_CX_AT_XE		},
-	{ 0x00000403, 0x00000403, CPU_MC,	CPU_INTEL_XEON		},
-	{ 0x00000404, 0x00000406, CPU_MC,	CPU_PM_CX_AT_XE		},
-	{ 0x00000407, 0x00000407, CPU_MC,	CPU_INTEL_XEON		},
-	{ 0x00000408, 0x0000040A, CPU_MC,	CPU_PM_CX_AT_XE		},
-	{ 0x0000040B, 0x0000040B, CPU_MC,	CPU_INTEL_XEON		},
-	{ 0x0000040C, 0x0000040E, CPU_MC,	CPU_PM_CX_XE		},
-	{ 0x0000040F, 0x0000040F, CPU_MC,	CPU_INTEL_XEON		},
-	{ 0x00000410, 0x00000412, CPU_MC,	CPU_PM_CX_AT_XE		},
-	{ 0x00000413, 0x00000417, CPU_MC,	CPU_CX_AT_XE		},
-	{ 0x00000480, 0x0000048B, CPU_VMX,	CPU_CX_AT_XE		},
-
-	{ 0x00000600, 0x00000600, CPU_DEBUG,	CPU_PM_CX_AT_XE		},
-	{ 0x00000680, 0x0000068F, CPU_LBRANCH,	CPU_INTEL_XEON		},
-	{ 0x000006C0, 0x000006CF, CPU_LBRANCH,	CPU_INTEL_XEON		},
-
-	{ 0x000107CC, 0x000107D3, CPU_PMC,	CPU_INTEL_XEON_MP	},
-
-	{ 0xC0000080, 0xC0000080, CPU_FEATURES,	CPU_INTEL_XEON		},
-	{ 0xC0000081, 0xC0000082, CPU_CALL,	CPU_INTEL_XEON		},
-	{ 0xC0000084, 0xC0000084, CPU_CALL,	CPU_INTEL_XEON		},
-	{ 0xC0000100, 0xC0000102, CPU_BASE,	CPU_INTEL_XEON		},
+/* CPU Registers Range */
+static struct cpu_debug_range cpu_reg_range[] = {
+	{ 0x00000000, 0x00000001, CPU_MC,	},
+	{ 0x00000006, 0x00000007, CPU_MONITOR,	},
+	{ 0x00000010, 0x00000010, CPU_TIME,	},
+	{ 0x00000011, 0x00000013, CPU_PMC,	},
+	{ 0x00000017, 0x00000017, CPU_PLATFORM,	},
+	{ 0x0000001B, 0x0000001B, CPU_APIC,	},
+	{ 0x0000002A, 0x0000002B, CPU_POWERON,	},
+	{ 0x0000002C, 0x0000002C, CPU_FREQ,	},
+	{ 0x0000003A, 0x0000003A, CPU_CONTROL,	},
+	{ 0x00000040, 0x00000047, CPU_LBRANCH,	},
+	{ 0x00000060, 0x00000067, CPU_LBRANCH,	},
+	{ 0x00000079, 0x00000079, CPU_BIOS,	},
+	{ 0x00000088, 0x0000008A, CPU_CACHE,	},
+	{ 0x0000008B, 0x0000008B, CPU_BIOS,	},
+	{ 0x0000009B, 0x0000009B, CPU_MONITOR,	},
+	{ 0x000000C1, 0x000000C4, CPU_PMC,	},
+	{ 0x000000CD, 0x000000CD, CPU_FREQ,	},
+	{ 0x000000E7, 0x000000E8, CPU_PERF,	},
+	{ 0x000000FE, 0x000000FE, CPU_MTRR,	},
+
+	{ 0x00000116, 0x0000011E, CPU_CACHE,	},
+	{ 0x00000174, 0x00000176, CPU_SYSENTER,	},
+	{ 0x00000179, 0x0000017B, CPU_MC,	},
+	{ 0x00000186, 0x00000189, CPU_PMC,	},
+	{ 0x00000198, 0x00000199, CPU_PERF,	},
+	{ 0x0000019A, 0x0000019A, CPU_TIME,	},
+	{ 0x0000019B, 0x0000019D, CPU_THERM,	},
+	{ 0x000001A0, 0x000001A0, CPU_MISC,	},
+	{ 0x000001C9, 0x000001C9, CPU_LBRANCH,	},
+	{ 0x000001D7, 0x000001D8, CPU_LBRANCH,	},
+	{ 0x000001D9, 0x000001D9, CPU_DEBUG,	},
+	{ 0x000001DA, 0x000001E0, CPU_LBRANCH,	},
+
+	{ 0x00000200, 0x0000020F, CPU_MTRR,	},
+	{ 0x00000250, 0x00000250, CPU_MTRR,	},
+	{ 0x00000258, 0x00000259, CPU_MTRR,	},
+	{ 0x00000268, 0x0000026F, CPU_MTRR,	},
+	{ 0x00000277, 0x00000277, CPU_PAT,	},
+	{ 0x000002FF, 0x000002FF, CPU_MTRR,	},
+
+	{ 0x00000300, 0x00000311, CPU_PMC,	},
+	{ 0x00000345, 0x00000345, CPU_PMC,	},
+	{ 0x00000360, 0x00000371, CPU_PMC,	},
+	{ 0x0000038D, 0x00000390, CPU_PMC,	},
+	{ 0x000003A0, 0x000003BE, CPU_PMC,	},
+	{ 0x000003C0, 0x000003CD, CPU_PMC,	},
+	{ 0x000003E0, 0x000003E1, CPU_PMC,	},
+	{ 0x000003F0, 0x000003F2, CPU_PMC,	},
+
+	{ 0x00000400, 0x00000417, CPU_MC,	},
+	{ 0x00000480, 0x0000048B, CPU_VMX,	},
+
+	{ 0x00000600, 0x00000600, CPU_DEBUG,	},
+	{ 0x00000680, 0x0000068F, CPU_LBRANCH,	},
+	{ 0x000006C0, 0x000006CF, CPU_LBRANCH,	},
+
+	{ 0x000107CC, 0x000107D3, CPU_PMC,	},
+
+	{ 0xC0000080, 0xC0000080, CPU_FEATURES,	},
+	{ 0xC0000081, 0xC0000084, CPU_CALL,	},
+	{ 0xC0000100, 0xC0000102, CPU_BASE,	},
+	{ 0xC0000103, 0xC0000103, CPU_TIME,	},
+
+	{ 0xC0010000, 0xC0010007, CPU_PMC,	},
+	{ 0xC0010010, 0xC0010010, CPU_CONF,	},
+	{ 0xC0010015, 0xC0010015, CPU_CONF,	},
+	{ 0xC0010016, 0xC001001A, CPU_MTRR,	},
+	{ 0xC001001D, 0xC001001D, CPU_MTRR,	},
+	{ 0xC001001F, 0xC001001F, CPU_CONF,	},
+	{ 0xC0010030, 0xC0010035, CPU_BIOS,	},
+	{ 0xC0010044, 0xC0010048, CPU_MC,	},
+	{ 0xC0010050, 0xC0010056, CPU_SMM,	},
+	{ 0xC0010058, 0xC0010058, CPU_CONF,	},
+	{ 0xC0010060, 0xC0010060, CPU_CACHE,	},
+	{ 0xC0010061, 0xC0010068, CPU_SMM,	},
+	{ 0xC0010069, 0xC001006B, CPU_SMM,	},
+	{ 0xC0010070, 0xC0010071, CPU_SMM,	},
+	{ 0xC0010111, 0xC0010113, CPU_SMM,	},
+	{ 0xC0010114, 0xC0010118, CPU_SVM,	},
+	{ 0xC0010140, 0xC0010141, CPU_OSVM,	},
+	{ 0xC0011022, 0xC0011023, CPU_CONF,	},
 };
 
-/* AMD Registers Range */
-static struct cpu_debug_range cpu_amd_range[] = {
-	{ 0x00000000, 0x00000001, CPU_MC,	CPU_K10_PLUS,		},
-	{ 0x00000010, 0x00000010, CPU_TIME,	CPU_K8_PLUS,		},
-	{ 0x0000001B, 0x0000001B, CPU_APIC,	CPU_K8_PLUS,		},
-	{ 0x0000002A, 0x0000002A, CPU_POWERON,	CPU_K7_PLUS		},
-	{ 0x0000008B, 0x0000008B, CPU_VER,	CPU_K8_PLUS		},
-	{ 0x000000FE, 0x000000FE, CPU_MTRR,	CPU_K8_PLUS,		},
-
-	{ 0x00000174, 0x00000176, CPU_SYSENTER,	CPU_K8_PLUS,		},
-	{ 0x00000179, 0x0000017B, CPU_MC,	CPU_K8_PLUS,		},
-	{ 0x000001D9, 0x000001D9, CPU_DEBUG,	CPU_K8_PLUS,		},
-	{ 0x000001DB, 0x000001DE, CPU_LBRANCH,	CPU_K8_PLUS,		},
-
-	{ 0x00000200, 0x0000020F, CPU_MTRR,	CPU_K8_PLUS,		},
-	{ 0x00000250, 0x00000250, CPU_MTRR,	CPU_K8_PLUS,		},
-	{ 0x00000258, 0x00000259, CPU_MTRR,	CPU_K8_PLUS,		},
-	{ 0x00000268, 0x0000026F, CPU_MTRR,	CPU_K8_PLUS,		},
-	{ 0x00000277, 0x00000277, CPU_PAT,	CPU_K8_PLUS,		},
-	{ 0x000002FF, 0x000002FF, CPU_MTRR,	CPU_K8_PLUS,		},
-
-	{ 0x00000400, 0x00000413, CPU_MC,	CPU_K8_PLUS,		},
-
-	{ 0xC0000080, 0xC0000080, CPU_FEATURES,	CPU_AMD_ALL,		},
-	{ 0xC0000081, 0xC0000084, CPU_CALL,	CPU_K8_PLUS,		},
-	{ 0xC0000100, 0xC0000102, CPU_BASE,	CPU_K8_PLUS,		},
-	{ 0xC0000103, 0xC0000103, CPU_TIME,	CPU_K10_PLUS,		},
-
-	{ 0xC0010000, 0xC0010007, CPU_PMC,	CPU_K8_PLUS,		},
-	{ 0xC0010010, 0xC0010010, CPU_CONF,	CPU_K7_PLUS,		},
-	{ 0xC0010015, 0xC0010015, CPU_CONF,	CPU_K7_PLUS,		},
-	{ 0xC0010016, 0xC001001A, CPU_MTRR,	CPU_K8_PLUS,		},
-	{ 0xC001001D, 0xC001001D, CPU_MTRR,	CPU_K8_PLUS,		},
-	{ 0xC001001F, 0xC001001F, CPU_CONF,	CPU_K8_PLUS,		},
-	{ 0xC0010030, 0xC0010035, CPU_BIOS,	CPU_K8_PLUS,		},
-	{ 0xC0010044, 0xC0010048, CPU_MC,	CPU_K8_PLUS,		},
-	{ 0xC0010050, 0xC0010056, CPU_SMM,	CPU_K0F_PLUS,		},
-	{ 0xC0010058, 0xC0010058, CPU_CONF,	CPU_K10_PLUS,		},
-	{ 0xC0010060, 0xC0010060, CPU_CACHE,	CPU_AMD_11,		},
-	{ 0xC0010061, 0xC0010068, CPU_SMM,	CPU_K10_PLUS,		},
-	{ 0xC0010069, 0xC001006B, CPU_SMM,	CPU_AMD_11,		},
-	{ 0xC0010070, 0xC0010071, CPU_SMM,	CPU_K10_PLUS,		},
-	{ 0xC0010111, 0xC0010113, CPU_SMM,	CPU_K8_PLUS,		},
-	{ 0xC0010114, 0xC0010118, CPU_SVM,	CPU_K10_PLUS,		},
-	{ 0xC0010140, 0xC0010141, CPU_OSVM,	CPU_K10_PLUS,		},
-	{ 0xC0011022, 0xC0011023, CPU_CONF,	CPU_K10_PLUS,		},
-};
-
-
-/* Intel */
-static int get_intel_modelflag(unsigned model)
-{
-	int flag;
-
-	switch (model) {
-	case 0x0501:
-	case 0x0502:
-	case 0x0504:
-		flag = CPU_INTEL_PENTIUM;
-		break;
-	case 0x0601:
-	case 0x0603:
-	case 0x0605:
-	case 0x0607:
-	case 0x0608:
-	case 0x060A:
-	case 0x060B:
-		flag = CPU_INTEL_P6;
-		break;
-	case 0x0609:
-	case 0x060D:
-		flag = CPU_INTEL_PENTIUM_M;
-		break;
-	case 0x060E:
-		flag = CPU_INTEL_CORE;
-		break;
-	case 0x060F:
-	case 0x0617:
-		flag = CPU_INTEL_CORE2;
-		break;
-	case 0x061C:
-		flag = CPU_INTEL_ATOM;
-		break;
-	case 0x0F00:
-	case 0x0F01:
-	case 0x0F02:
-	case 0x0F03:
-	case 0x0F04:
-		flag = CPU_INTEL_XEON_P4;
-		break;
-	case 0x0F06:
-		flag = CPU_INTEL_XEON_MP;
-		break;
-	default:
-		flag = CPU_NONE;
-		break;
-	}
-
-	return flag;
-}
-
-/* AMD */
-static int get_amd_modelflag(unsigned model)
-{
-	int flag;
-
-	switch (model >> 8) {
-	case 0x6:
-		flag = CPU_AMD_K6;
-		break;
-	case 0x7:
-		flag = CPU_AMD_K7;
-		break;
-	case 0x8:
-		flag = CPU_AMD_K8;
-		break;
-	case 0xf:
-		flag = CPU_AMD_0F;
-		break;
-	case 0x10:
-		flag = CPU_AMD_10;
-		break;
-	case 0x11:
-		flag = CPU_AMD_11;
-		break;
-	default:
-		flag = CPU_NONE;
-		break;
-	}
-
-	return flag;
-}
-
-static int get_cpu_modelflag(unsigned cpu)
-{
-	int flag;
-
-	flag = per_cpu(cpu_model, cpu);
-
-	switch (flag >> 16) {
-	case X86_VENDOR_INTEL:
-		flag = get_intel_modelflag(flag);
-		break;
-	case X86_VENDOR_AMD:
-		flag = get_amd_modelflag(flag & 0xffff);
-		break;
-	default:
-		flag = CPU_NONE;
-		break;
-	}
-
-	return flag;
-}
-
-static int get_cpu_range_count(unsigned cpu)
-{
-	int index;
-
-	switch (per_cpu(cpu_model, cpu) >> 16) {
-	case X86_VENDOR_INTEL:
-		index = ARRAY_SIZE(cpu_intel_range);
-		break;
-	case X86_VENDOR_AMD:
-		index = ARRAY_SIZE(cpu_amd_range);
-		break;
-	default:
-		index = 0;
-		break;
-	}
-
-	return index;
-}
-
 static int is_typeflag_valid(unsigned cpu, unsigned flag)
 {
-	unsigned vendor, modelflag;
-	int i, index;
+	int i;
 
 	/* Standard Registers should be always valid */
 	if (flag >= CPU_TSS)
 		return 1;
 
-	modelflag = per_cpu(cpu_modelflag, cpu);
-	vendor = per_cpu(cpu_model, cpu) >> 16;
-	index = get_cpu_range_count(cpu);
-
-	for (i = 0; i < index; i++) {
-		switch (vendor) {
-		case X86_VENDOR_INTEL:
-			if ((cpu_intel_range[i].model & modelflag) &&
-			    (cpu_intel_range[i].flag & flag))
-				return 1;
-			break;
-		case X86_VENDOR_AMD:
-			if ((cpu_amd_range[i].model & modelflag) &&
-			    (cpu_amd_range[i].flag & flag))
-				return 1;
-			break;
-		}
+	for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
+		if (cpu_reg_range[i].flag == flag)
+			return 1;
 	}
 
 	/* Invalid */
@@ -385,26 +183,11 @@ static int is_typeflag_valid(unsigned cpu, unsigned flag)
 static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max,
 			      int index, unsigned flag)
 {
-	unsigned modelflag;
-
-	modelflag = per_cpu(cpu_modelflag, cpu);
-	*max = 0;
-	switch (per_cpu(cpu_model, cpu) >> 16) {
-	case X86_VENDOR_INTEL:
-		if ((cpu_intel_range[index].model & modelflag) &&
-		    (cpu_intel_range[index].flag & flag)) {
-			*min = cpu_intel_range[index].min;
-			*max = cpu_intel_range[index].max;
-		}
-		break;
-	case X86_VENDOR_AMD:
-		if ((cpu_amd_range[index].model & modelflag) &&
-		    (cpu_amd_range[index].flag & flag)) {
-			*min = cpu_amd_range[index].min;
-			*max = cpu_amd_range[index].max;
-		}
-		break;
-	}
+	if (cpu_reg_range[index].flag == flag) {
+		*min = cpu_reg_range[index].min;
+		*max = cpu_reg_range[index].max;
+	} else
+		*max = 0;
 
 	return *max;
 }
@@ -434,7 +217,7 @@ static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag)
 	unsigned msr, msr_min, msr_max;
 	struct cpu_private *priv;
 	u32 low, high;
-	int i, range;
+	int i;
 
 	if (seq) {
 		priv = seq->private;
@@ -446,9 +229,7 @@ static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag)
 		}
 	}
 
-	range = get_cpu_range_count(cpu);
-
-	for (i = 0; i < range; i++) {
+	for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
 		if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag))
 			continue;
 
@@ -588,8 +369,20 @@ static void print_apic(void *arg)
 	seq_printf(seq, " TMICT\t\t: %08x\n",  apic_read(APIC_TMICT));
 	seq_printf(seq, " TMCCT\t\t: %08x\n",  apic_read(APIC_TMCCT));
 	seq_printf(seq, " TDCR\t\t: %08x\n",  apic_read(APIC_TDCR));
-#endif /* CONFIG_X86_LOCAL_APIC */
+	if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
+		unsigned int i, v, maxeilvt;
+
+		v = apic_read(APIC_EFEAT);
+		maxeilvt = (v >> 16) & 0xff;
+		seq_printf(seq, " EFEAT\t\t: %08x\n", v);
+		seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL));
 
+		for (i = 0; i < maxeilvt; i++) {
+			v = apic_read(APIC_EILVTn(i));
+			seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v);
+		}
+	}
+#endif /* CONFIG_X86_LOCAL_APIC */
 	seq_printf(seq, "\n MSR\t:\n");
 }
 
@@ -788,13 +581,11 @@ static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry)
 {
 	struct dentry *cpu_dentry = NULL;
 	unsigned reg, reg_min, reg_max;
-	int i, range, err = 0;
+	int i, err = 0;
 	char reg_dir[12];
 	u32 low, high;
 
-	range = get_cpu_range_count(cpu);
-
-	for (i = 0; i < range; i++) {
+	for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
 		if (!get_cpu_range(cpu, &reg_min, &reg_max, i,
 				   cpu_base[type].flag))
 			continue;
@@ -850,10 +641,6 @@ static int cpu_init_cpu(void)
 		cpui = &cpu_data(cpu);
 		if (!cpu_has(cpui, X86_FEATURE_MSR))
 			continue;
-		per_cpu(cpu_model, cpu) = ((cpui->x86_vendor << 16) |
-					   (cpui->x86 << 8) |
-					   (cpui->x86_model));
-		per_cpu(cpu_modelflag, cpu) = get_cpu_modelflag(cpu);
 
 		sprintf(cpu_dir, "cpu%d", cpu);
 		cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir);
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index 52c83987547..f138c6c389b 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -220,11 +220,14 @@ config X86_LONGHAUL
 	  If in doubt, say N.
 
 config X86_E_POWERSAVER
-	tristate "VIA C7 Enhanced PowerSaver"
+	tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
 	select CPU_FREQ_TABLE
-	depends on X86_32
+	depends on X86_32 && EXPERIMENTAL
 	help
-	  This adds the CPUFreq driver for VIA C7 processors.
+	  This adds the CPUFreq driver for VIA C7 processors.  However, this driver
+	  does not have any safeguards to prevent operating the CPU out of spec
+	  and is thus considered dangerous.  Please use the regular ACPI cpufreq
+	  driver, enabled by CONFIG_X86_ACPI_CPUFREQ.
 
 	  If in doubt, say N.
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 208ecf6643d..ae9b503220c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -90,11 +90,7 @@ static int check_est_cpu(unsigned int cpuid)
 {
 	struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
 
-	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
-	    !cpu_has(cpu, X86_FEATURE_EST))
-		return 0;
-
-	return 1;
+	return cpu_has(cpu, X86_FEATURE_EST);
 }
 
 static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
@@ -550,7 +546,7 @@ static int __init acpi_cpufreq_early_init(void)
 		return -ENOMEM;
 	}
 	for_each_possible_cpu(i) {
-		if (!alloc_cpumask_var_node(
+		if (!zalloc_cpumask_var_node(
 			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
 			GFP_KERNEL, cpu_to_node(i))) {
 
@@ -693,8 +689,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
 	    policy->cpuinfo.transition_latency > 20 * 1000) {
 		policy->cpuinfo.transition_latency = 20 * 1000;
-			printk_once(KERN_INFO "Capping off P-state tranision"
-				    " latency at 20 uS\n");
+		printk_once(KERN_INFO
+			    "P-state transition latency capped at 20 uS\n");
 	}
 
 	/* table init */
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 6ac55bd341a..86961519372 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -168,6 +168,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
 		case 0x16: /* Celeron Core */
+		case 0x1C: /* Atom */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
 		case 0x0D: /* Pentium M (Dothan) */
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index 3c28ccd4974..d47c775eb0a 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -168,10 +168,12 @@ static int check_powernow(void)
 	return 1;
 }
 
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
 static void invalidate_entry(unsigned int entry)
 {
 	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
 }
+#endif
 
 static int get_ranges(unsigned char *pst)
 {
@@ -320,7 +322,7 @@ static int powernow_acpi_init(void)
 		goto err0;
 	}
 
-	if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
+	if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
 								GFP_KERNEL)) {
 		retval = -ENOMEM;
 		goto err05;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 4709ead2db5..cf52215d9eb 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -649,6 +649,20 @@ static void print_basics(struct powernow_k8_data *data)
 				data->batps);
 }
 
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+	u32 mhz = 0;
+
+	if (boot_cpu_data.x86 == 0x10)
+		mhz = (100 * (fid + 0x10)) >> did;
+	else if (boot_cpu_data.x86 == 0x11)
+		mhz = (100 * (fid + 8)) >> did;
+	else
+		BUG();
+
+	return mhz * 1000;
+}
+
 static int fill_powernow_table(struct powernow_k8_data *data,
 		struct pst_s *pst, u8 maxvid)
 {
@@ -821,7 +835,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	int ret_val = -ENODEV;
-	acpi_integer space_id;
+	acpi_integer control, status;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
 		dprintk("register performance failed: bad ACPI data\n");
@@ -834,12 +848,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		goto err_out;
 	}
 
-	space_id = data->acpi_data.control_register.space_id;
-	if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-		(space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+	control = data->acpi_data.control_register.space_id;
+	status = data->acpi_data.status_register.space_id;
+
+	if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 		dprintk("Invalid control/status registers (%x - %x)\n",
-			data->acpi_data.control_register.space_id,
-			space_id);
+			control, status);
 		goto err_out;
 	}
 
@@ -872,7 +887,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
 
-	if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+	if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
 		printk(KERN_ERR PFX
 				"unable to alloc powernow_k8_data cpumask\n");
 		ret_val = -ENOMEM;
@@ -923,8 +938,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 
 		powernow_table[i].index = index;
 
-		powernow_table[i].frequency =
-			data->acpi_data.states[i].core_frequency * 1000;
+		/* Frequency may be rounded for these */
+		if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+			powernow_table[i].frequency =
+				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+		} else
+			powernow_table[i].frequency =
+				data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
@@ -1215,13 +1235,16 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
 	return cpufreq_frequency_table_verify(pol, data->powernow_table);
 }
 
+static const char ACPI_PSS_BIOS_BUG_MSG[] =
+	KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+	KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+
 /* per CPU init entry point to the driver */
 static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
 	int rc;
-	static int print_once;
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1244,19 +1267,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-			/*
-			 * Replace this one with print_once as soon as such a
-			 * thing gets introduced
-			 */
-			if (!print_once) {
-				WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
-					"does not provide ACPI _PSS objects "
-					"in a way that Linux understands. "
-					"Please report this to the Linux ACPI"
-					" maintainers and complain to your "
-					"BIOS vendor.\n");
-				print_once++;
-			}
+			printk_once(ACPI_PSS_BIOS_BUG_MSG);
 			goto err_out;
 		}
 		if (pol->cpu != 0) {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index c9f1fdc0283..55c831ed71c 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -471,7 +471,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 
 	if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL)))
 		return -ENOMEM;
-	if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
+	if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
 		free_cpumask_var(saved_mask);
 		return -ENOMEM;
 	}
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 7437fa133c0..daed39ba261 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -229,12 +229,12 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 }
 #endif
 
-static void __cpuinit srat_detect_node(void)
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 {
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	unsigned node;
 	int cpu = smp_processor_id();
-	int apicid = hard_smp_processor_id();
+	int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
 
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
@@ -400,7 +400,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	}
 
 	/* Work around errata */
-	srat_detect_node();
+	srat_detect_node(c);
 
 	if (cpu_has(c, X86_FEATURE_VMX))
 		detect_vmx_virtcap(c);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 483eda96e10..789efe217e1 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -17,6 +17,7 @@
 
 #include <asm/processor.h>
 #include <asm/smp.h>
+#include <asm/k8.h>
 
 #define LVL_1_INST	1
 #define LVL_1_DATA	2
@@ -159,14 +160,6 @@ struct _cpuid4_info_regs {
 	unsigned long can_disable;
 };
 
-#if defined(CONFIG_PCI) && defined(CONFIG_SYSFS)
-static struct pci_device_id k8_nb_id[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
-	{}
-};
-#endif
-
 unsigned short			num_cache_leaves;
 
 /* AMD doesn't have CPUID4. Emulate it here to report the same
@@ -207,10 +200,17 @@ union l3_cache {
 };
 
 static const unsigned short __cpuinitconst assocs[] = {
-	[1] = 1, [2] = 2, [4] = 4, [6] = 8,
-	[8] = 16, [0xa] = 32, [0xb] = 48,
+	[1] = 1,
+	[2] = 2,
+	[4] = 4,
+	[6] = 8,
+	[8] = 16,
+	[0xa] = 32,
+	[0xb] = 48,
 	[0xc] = 64,
-	[0xf] = 0xffff // ??
+	[0xd] = 96,
+	[0xe] = 128,
+	[0xf] = 0xffff /* fully associative - no way to show this currently */
 };
 
 static const unsigned char __cpuinitconst levels[] = { 1, 1, 2, 3 };
@@ -271,7 +271,8 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	eax->split.type = types[leaf];
 	eax->split.level = levels[leaf];
 	if (leaf == 3)
-		eax->split.num_threads_sharing = current_cpu_data.x86_max_cores - 1;
+		eax->split.num_threads_sharing =
+			current_cpu_data.x86_max_cores - 1;
 	else
 		eax->split.num_threads_sharing = 0;
 	eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
@@ -291,6 +292,14 @@ amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
 {
 	if (index < 3)
 		return;
+
+	if (boot_cpu_data.x86 == 0x11)
+		return;
+
+	/* see erratum #382 */
+	if ((boot_cpu_data.x86 == 0x10) && (boot_cpu_data.x86_model < 0x8))
+		return;
+
 	this_leaf->can_disable = 1;
 }
 
@@ -696,97 +705,75 @@ static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf)
 #define to_object(k)	container_of(k, struct _index_kobject, kobj)
 #define to_attr(a)	container_of(a, struct _cache_attr, attr)
 
-#ifdef CONFIG_PCI
-static struct pci_dev *get_k8_northbridge(int node)
-{
-	struct pci_dev *dev = NULL;
-	int i;
-
-	for (i = 0; i <= node; i++) {
-		do {
-			dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
-			if (!dev)
-				break;
-		} while (!pci_match_id(&k8_nb_id[0], dev));
-		if (!dev)
-			break;
-	}
-	return dev;
-}
-#else
-static struct pci_dev *get_k8_northbridge(int node)
-{
-	return NULL;
-}
-#endif
-
-static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
+				  unsigned int index)
 {
-	const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map);
-	int node = cpu_to_node(cpumask_first(mask));
-	struct pci_dev *dev = NULL;
-	ssize_t ret = 0;
-	int i;
+	int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+	int node = cpu_to_node(cpu);
+	struct pci_dev *dev = node_to_k8_nb_misc(node);
+	unsigned int reg = 0;
 
 	if (!this_leaf->can_disable)
-		return sprintf(buf, "Feature not enabled\n");
-
-	dev = get_k8_northbridge(node);
-	if (!dev) {
-		printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
 		return -EINVAL;
-	}
 
-	for (i = 0; i < 2; i++) {
-		unsigned int reg;
+	if (!dev)
+		return -EINVAL;
 
-		pci_read_config_dword(dev, 0x1BC + i * 4, &reg);
+	pci_read_config_dword(dev, 0x1BC + index * 4, &reg);
+	return sprintf(buf, "%x\n", reg);
+}
 
-		ret += sprintf(buf, "%sEntry: %d\n", buf, i);
-		ret += sprintf(buf, "%sReads:  %s\tNew Entries: %s\n",  
-			buf,
-			reg & 0x80000000 ? "Disabled" : "Allowed",
-			reg & 0x40000000 ? "Disabled" : "Allowed");
-		ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n",
-			buf, (reg & 0x30000) >> 16, reg & 0xfff);
-	}
-	return ret;
+#define SHOW_CACHE_DISABLE(index)					\
+static ssize_t								\
+show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf)  	\
+{									\
+	return show_cache_disable(this_leaf, buf, index);		\
 }
+SHOW_CACHE_DISABLE(0)
+SHOW_CACHE_DISABLE(1)
 
-static ssize_t
-store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
-		    size_t count)
+static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
+	const char *buf, size_t count, unsigned int index)
 {
-	const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map);
-	int node = cpu_to_node(cpumask_first(mask));
-	struct pci_dev *dev = NULL;
-	unsigned int ret, index, val;
+	int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+	int node = cpu_to_node(cpu);
+	struct pci_dev *dev = node_to_k8_nb_misc(node);
+	unsigned long val = 0;
+	unsigned int scrubber = 0;
 
 	if (!this_leaf->can_disable)
-		return 0;
-
-	if (strlen(buf) > 15)
 		return -EINVAL;
 
-	ret = sscanf(buf, "%x %x", &index, &val);
-	if (ret != 2)
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (!dev)
 		return -EINVAL;
-	if (index > 1)
+
+	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
 
 	val |= 0xc0000000;
-	dev = get_k8_northbridge(node);
-	if (!dev) {
-		printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
-		return -EINVAL;
-	}
+
+	pci_read_config_dword(dev, 0x58, &scrubber);
+	scrubber &= ~0x1f000000;
+	pci_write_config_dword(dev, 0x58, scrubber);
 
 	pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
 	wbinvd();
 	pci_write_config_dword(dev, 0x1BC + index * 4, val);
+	return count;
+}
 
-	return 1;
+#define STORE_CACHE_DISABLE(index)					\
+static ssize_t								\
+store_cache_disable_##index(struct _cpuid4_info *this_leaf,	     	\
+			    const char *buf, size_t count)		\
+{									\
+	return store_cache_disable(this_leaf, buf, count, index);	\
 }
+STORE_CACHE_DISABLE(0)
+STORE_CACHE_DISABLE(1)
 
 struct _cache_attr {
 	struct attribute attr;
@@ -808,7 +795,10 @@ define_one_ro(size);
 define_one_ro(shared_cpu_map);
 define_one_ro(shared_cpu_list);
 
-static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable);
+static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
+		show_cache_disable_0, store_cache_disable_0);
+static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
+		show_cache_disable_1, store_cache_disable_1);
 
 static struct attribute * default_attrs[] = {
 	&type.attr,
@@ -820,7 +810,8 @@ static struct attribute * default_attrs[] = {
 	&size.attr,
 	&shared_cpu_map.attr,
 	&shared_cpu_list.attr,
-	&cache_disable.attr,
+	&cache_disable_0.attr,
+	&cache_disable_1.attr,
 	NULL
 };
 
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index b2f89829bbe..45004faf67e 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,7 +1,11 @@
-obj-y				=  mce_$(BITS).o therm_throt.o
+obj-y				=  mce.o therm_throt.o
 
-obj-$(CONFIG_X86_32)		+= k7.o p4.o p5.o p6.o winchip.o
-obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o
+obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
+obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
+obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
+obj-$(CONFIG_X86_MCE_P4THERMAL)	+= mce_intel.o
+obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o mce_intel.o
 obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd_64.o
 obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
+obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index dd3af6e7b39..89e51042415 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -2,11 +2,10 @@
  * Athlon specific Machine Check Exception Reporting
  * (C) Copyright 2002 Dave Jones <davej@redhat.com>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -15,12 +14,12 @@
 
 #include "mce.h"
 
-/* Machine Check Handler For AMD Athlon/Duron */
+/* Machine Check Handler For AMD Athlon/Duron: */
 static void k7_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
+	int recover = 1;
 	int i;
 
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -32,15 +31,19 @@ static void k7_machine_check(struct pt_regs *regs, long error_code)
 
 	for (i = 1; i < nr_mce_banks; i++) {
 		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high&(1<<31)) {
+		if (high & (1<<31)) {
 			char misc[20];
 			char addr[24];
-			misc[0] = addr[0] = '\0';
+
+			misc[0] = '\0';
+			addr[0] = '\0';
+
 			if (high & (1<<29))
 				recover |= 1;
 			if (high & (1<<25))
 				recover |= 2;
 			high &= ~(1<<31);
+
 			if (high & (1<<27)) {
 				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
 				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
@@ -49,27 +52,31 @@ static void k7_machine_check(struct pt_regs *regs, long error_code)
 				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
 				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
 			}
+
 			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
 				smp_processor_id(), i, high, low, misc, addr);
-			/* Clear it */
+
+			/* Clear it: */
 			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-			/* Serialize */
+			/* Serialize: */
 			wmb();
 			add_taint(TAINT_MACHINE_CHECK);
 		}
 	}
 
-	if (recover&2)
+	if (recover & 2)
 		panic("CPU context corrupt");
-	if (recover&1)
+	if (recover & 1)
 		panic("Unable to continue");
+
 	printk(KERN_EMERG "Attempting to continue.\n");
+
 	mcgstl &= ~(1<<2);
 	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 
-/* AMD K7 machine check is Intel like */
+/* AMD K7 machine check is Intel like: */
 void amd_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -79,21 +86,26 @@ void amd_mcheck_init(struct cpuinfo_x86 *c)
 		return;
 
 	machine_check_vector = k7_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
 
 	printk(KERN_INFO "Intel machine check architecture supported.\n");
+
 	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	/* Clear status for MC index 0 separately, we don't touch CTL,
-	 * as some K7 Athlons cause spurious MCEs when its enabled. */
+	/*
+	 * Clear status for MC index 0 separately, we don't touch CTL,
+	 * as some K7 Athlons cause spurious MCEs when its enabled:
+	 */
 	if (boot_cpu_data.x86 == 6) {
 		wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
 		i = 1;
 	} else
 		i = 0;
+
 	for (; i < nr_mce_banks; i++) {
 		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
 		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
new file mode 100644
index 00000000000..a3a235a53f0
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -0,0 +1,127 @@
+/*
+ * Machine check injection support.
+ * Copyright 2008 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Authors:
+ * Andi Kleen
+ * Ying Huang
+ */
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <asm/mce.h>
+
+/* Update fake mce registers on current CPU. */
+static void inject_mce(struct mce *m)
+{
+	struct mce *i = &per_cpu(injectm, m->extcpu);
+
+	/* Make sure noone reads partially written injectm */
+	i->finished = 0;
+	mb();
+	m->finished = 0;
+	/* First set the fields after finished */
+	i->extcpu = m->extcpu;
+	mb();
+	/* Now write record in order, finished last (except above) */
+	memcpy(i, m, sizeof(struct mce));
+	/* Finally activate it */
+	mb();
+	i->finished = 1;
+}
+
+struct delayed_mce {
+	struct timer_list timer;
+	struct mce m;
+};
+
+/* Inject mce on current CPU */
+static void raise_mce(unsigned long data)
+{
+	struct delayed_mce *dm = (struct delayed_mce *)data;
+	struct mce *m = &dm->m;
+	int cpu = m->extcpu;
+
+	inject_mce(m);
+	if (m->status & MCI_STATUS_UC) {
+		struct pt_regs regs;
+		memset(&regs, 0, sizeof(struct pt_regs));
+		regs.ip = m->ip;
+		regs.cs = m->cs;
+		printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
+		do_machine_check(&regs, 0);
+		printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
+	} else {
+		mce_banks_t b;
+		memset(&b, 0xff, sizeof(mce_banks_t));
+		printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
+		machine_check_poll(0, &b);
+		mce_notify_irq();
+		printk(KERN_INFO "Finished machine check poll on CPU %d\n",
+		       cpu);
+	}
+	kfree(dm);
+}
+
+/* Error injection interface */
+static ssize_t mce_write(struct file *filp, const char __user *ubuf,
+			 size_t usize, loff_t *off)
+{
+	struct delayed_mce *dm;
+	struct mce m;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	/*
+	 * There are some cases where real MSR reads could slip
+	 * through.
+	 */
+	if (!boot_cpu_has(X86_FEATURE_MCE) || !boot_cpu_has(X86_FEATURE_MCA))
+		return -EIO;
+
+	if ((unsigned long)usize > sizeof(struct mce))
+		usize = sizeof(struct mce);
+	if (copy_from_user(&m, ubuf, usize))
+		return -EFAULT;
+
+	if (m.extcpu >= num_possible_cpus() || !cpu_online(m.extcpu))
+		return -EINVAL;
+
+	dm = kmalloc(sizeof(struct delayed_mce), GFP_KERNEL);
+	if (!dm)
+		return -ENOMEM;
+
+	/*
+	 * Need to give user space some time to set everything up,
+	 * so do it a jiffie or two later everywhere.
+	 * Should we use a hrtimer here for better synchronization?
+	 */
+	memcpy(&dm->m, &m, sizeof(struct mce));
+	setup_timer(&dm->timer, raise_mce, (unsigned long)dm);
+	dm->timer.expires = jiffies + 2;
+	add_timer_on(&dm->timer, m.extcpu);
+	return usize;
+}
+
+static int inject_init(void)
+{
+	printk(KERN_INFO "Machine check injector initialized\n");
+	mce_chrdev_ops.write = mce_write;
+	return 0;
+}
+
+module_init(inject_init);
+/*
+ * Cannot tolerate unloading currently because we cannot
+ * guarantee all openers of mce_chrdev will get a reference to us.
+ */
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
new file mode 100644
index 00000000000..54dcb8ff12e
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -0,0 +1,15 @@
+#include <asm/mce.h>
+
+enum severity_level {
+	MCE_NO_SEVERITY,
+	MCE_KEEP_SEVERITY,
+	MCE_SOME_SEVERITY,
+	MCE_AO_SEVERITY,
+	MCE_UC_SEVERITY,
+	MCE_AR_SEVERITY,
+	MCE_PANIC_SEVERITY,
+};
+
+int mce_severity(struct mce *a, int tolerant, char **msg);
+
+extern int mce_ser;
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
new file mode 100644
index 00000000000..ff0807f9705
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -0,0 +1,218 @@
+/*
+ * MCE grading rules.
+ * Copyright 2008, 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Author: Andi Kleen
+ */
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <asm/mce.h>
+
+#include "mce-internal.h"
+
+/*
+ * Grade an mce by severity. In general the most severe ones are processed
+ * first. Since there are quite a lot of combinations test the bits in a
+ * table-driven way. The rules are simply processed in order, first
+ * match wins.
+ *
+ * Note this is only used for machine check exceptions, the corrected
+ * errors use much simpler rules. The exceptions still check for the corrected
+ * errors, but only to leave them alone for the CMCI handler (except for
+ * panic situations)
+ */
+
+enum context { IN_KERNEL = 1, IN_USER = 2 };
+enum ser { SER_REQUIRED = 1, NO_SER = 2 };
+
+static struct severity {
+	u64 mask;
+	u64 result;
+	unsigned char sev;
+	unsigned char mcgmask;
+	unsigned char mcgres;
+	unsigned char ser;
+	unsigned char context;
+	unsigned char covered;
+	char *msg;
+} severities[] = {
+#define KERNEL .context = IN_KERNEL
+#define USER .context = IN_USER
+#define SER .ser = SER_REQUIRED
+#define NOSER .ser = NO_SER
+#define SEV(s) .sev = MCE_ ## s ## _SEVERITY
+#define BITCLR(x, s, m, r...) { .mask = x, .result = 0, SEV(s), .msg = m, ## r }
+#define BITSET(x, s, m, r...) { .mask = x, .result = x, SEV(s), .msg = m, ## r }
+#define MCGMASK(x, res, s, m, r...) \
+	{ .mcgmask = x, .mcgres = res, SEV(s), .msg = m, ## r }
+#define MASK(x, y, s, m, r...) \
+	{ .mask = x, .result = y, SEV(s), .msg = m, ## r }
+#define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
+#define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
+#define MCACOD 0xffff
+
+	BITCLR(MCI_STATUS_VAL, NO, "Invalid"),
+	BITCLR(MCI_STATUS_EN, NO, "Not enabled"),
+	BITSET(MCI_STATUS_PCC, PANIC, "Processor context corrupt"),
+	/* When MCIP is not set something is very confused */
+	MCGMASK(MCG_STATUS_MCIP, 0, PANIC, "MCIP not set in MCA handler"),
+	/* Neither return not error IP -- no chance to recover -> PANIC */
+	MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, 0, PANIC,
+		"Neither restart nor error IP"),
+	MCGMASK(MCG_STATUS_RIPV, 0, PANIC, "In kernel and no restart IP",
+		KERNEL),
+	BITCLR(MCI_STATUS_UC, KEEP, "Corrected error", NOSER),
+	MASK(MCI_STATUS_OVER|MCI_STATUS_UC|MCI_STATUS_EN, MCI_STATUS_UC, SOME,
+	     "Spurious not enabled", SER),
+
+	/* ignore OVER for UCNA */
+	MASK(MCI_UC_SAR, MCI_STATUS_UC, KEEP,
+	     "Uncorrected no action required", SER),
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_UC|MCI_STATUS_AR, PANIC,
+	     "Illegal combination (UCNA with AR=1)", SER),
+	MASK(MCI_STATUS_S, 0, KEEP, "Non signalled machine check", SER),
+
+	/* AR add known MCACODs here */
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_OVER|MCI_UC_SAR, PANIC,
+	     "Action required with lost events", SER),
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCACOD, MCI_UC_SAR, PANIC,
+	     "Action required; unknown MCACOD", SER),
+
+	/* known AO MCACODs: */
+	MASK(MCI_UC_SAR|MCI_STATUS_OVER|0xfff0, MCI_UC_S|0xc0, AO,
+	     "Action optional: memory scrubbing error", SER),
+	MASK(MCI_UC_SAR|MCI_STATUS_OVER|MCACOD, MCI_UC_S|0x17a, AO,
+	     "Action optional: last level cache writeback error", SER),
+
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S, SOME,
+	     "Action optional unknown MCACOD", SER),
+	MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S|MCI_STATUS_OVER, SOME,
+	     "Action optional with lost events", SER),
+	BITSET(MCI_STATUS_UC|MCI_STATUS_OVER, PANIC, "Overflowed uncorrected"),
+	BITSET(MCI_STATUS_UC, UC, "Uncorrected"),
+	BITSET(0, SOME, "No match")	/* always matches. keep at end */
+};
+
+/*
+ * If the EIPV bit is set, it means the saved IP is the
+ * instruction which caused the MCE.
+ */
+static int error_context(struct mce *m)
+{
+	if (m->mcgstatus & MCG_STATUS_EIPV)
+		return (m->ip && (m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
+	/* Unknown, assume kernel */
+	return IN_KERNEL;
+}
+
+int mce_severity(struct mce *a, int tolerant, char **msg)
+{
+	enum context ctx = error_context(a);
+	struct severity *s;
+
+	for (s = severities;; s++) {
+		if ((a->status & s->mask) != s->result)
+			continue;
+		if ((a->mcgstatus & s->mcgmask) != s->mcgres)
+			continue;
+		if (s->ser == SER_REQUIRED && !mce_ser)
+			continue;
+		if (s->ser == NO_SER && mce_ser)
+			continue;
+		if (s->context && ctx != s->context)
+			continue;
+		if (msg)
+			*msg = s->msg;
+		s->covered = 1;
+		if (s->sev >= MCE_UC_SEVERITY && ctx == IN_KERNEL) {
+			if (panic_on_oops || tolerant < 1)
+				return MCE_PANIC_SEVERITY;
+		}
+		return s->sev;
+	}
+}
+
+static void *s_start(struct seq_file *f, loff_t *pos)
+{
+	if (*pos >= ARRAY_SIZE(severities))
+		return NULL;
+	return &severities[*pos];
+}
+
+static void *s_next(struct seq_file *f, void *data, loff_t *pos)
+{
+	if (++(*pos) >= ARRAY_SIZE(severities))
+		return NULL;
+	return &severities[*pos];
+}
+
+static void s_stop(struct seq_file *f, void *data)
+{
+}
+
+static int s_show(struct seq_file *f, void *data)
+{
+	struct severity *ser = data;
+	seq_printf(f, "%d\t%s\n", ser->covered, ser->msg);
+	return 0;
+}
+
+static const struct seq_operations severities_seq_ops = {
+	.start	= s_start,
+	.next	= s_next,
+	.stop	= s_stop,
+	.show	= s_show,
+};
+
+static int severities_coverage_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &severities_seq_ops);
+}
+
+static ssize_t severities_coverage_write(struct file *file,
+					 const char __user *ubuf,
+					 size_t count, loff_t *ppos)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(severities); i++)
+		severities[i].covered = 0;
+	return count;
+}
+
+static const struct file_operations severities_coverage_fops = {
+	.open		= severities_coverage_open,
+	.release	= seq_release,
+	.read		= seq_read,
+	.write		= severities_coverage_write,
+};
+
+static int __init severities_debugfs_init(void)
+{
+	struct dentry *dmce = NULL, *fseverities_coverage = NULL;
+
+	dmce = debugfs_create_dir("mce", NULL);
+	if (dmce == NULL)
+		goto err_out;
+	fseverities_coverage = debugfs_create_file("severities-coverage",
+						   0444, dmce, NULL,
+						   &severities_coverage_fops);
+	if (fseverities_coverage == NULL)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	if (fseverities_coverage)
+		debugfs_remove(fseverities_coverage);
+	if (dmce)
+		debugfs_remove(dmce);
+	return -ENOMEM;
+}
+late_initcall(severities_debugfs_init);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
new file mode 100644
index 00000000000..fabba15e455
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -0,0 +1,1964 @@
+/*
+ * Machine check handler.
+ *
+ * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
+ * Rest from unknown author(s).
+ * 2004 Andi Kleen. Rewrote most of it.
+ * Copyright 2008 Intel Corporation
+ * Author: Andi Kleen
+ */
+#include <linux/thread_info.h>
+#include <linux/capability.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ratelimit.h>
+#include <linux/kallsyms.h>
+#include <linux/rcupdate.h>
+#include <linux/kobject.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/string.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/sched.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/poll.h>
+#include <linux/nmi.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/processor.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/ipi.h>
+#include <asm/mce.h>
+#include <asm/msr.h>
+
+#include "mce-internal.h"
+#include "mce.h"
+
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+	       smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) =
+						unexpected_machine_check;
+
+int				mce_disabled;
+
+#ifdef CONFIG_X86_NEW_MCE
+
+#define MISC_MCELOG_MINOR	227
+
+#define SPINUNIT 100	/* 100ns */
+
+atomic_t mce_entry;
+
+DEFINE_PER_CPU(unsigned, mce_exception_count);
+
+/*
+ * Tolerant levels:
+ *   0: always panic on uncorrected errors, log corrected errors
+ *   1: panic or SIGBUS on uncorrected errors, log corrected errors
+ *   2: SIGBUS or log uncorrected errors (if possible), log corrected errors
+ *   3: never panic or SIGBUS, log all errors (for testing only)
+ */
+static int			tolerant = 1;
+static int			banks;
+static u64			*bank;
+static unsigned long		notify_user;
+static int			rip_msr;
+static int			mce_bootlog = -1;
+static int			monarch_timeout = -1;
+static int			mce_panic_timeout;
+static int			mce_dont_log_ce;
+int				mce_cmci_disabled;
+int				mce_ignore_ce;
+int				mce_ser;
+
+static char			trigger[128];
+static char			*trigger_argv[2] = { trigger, NULL };
+
+static unsigned long		dont_init_banks;
+
+static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
+static DEFINE_PER_CPU(struct mce, mces_seen);
+static int			cpu_missing;
+
+
+/* MCA banks polled by the period polling timer for corrected events */
+DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
+	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
+};
+
+static inline int skip_bank_init(int i)
+{
+	return i < BITS_PER_LONG && test_bit(i, &dont_init_banks);
+}
+
+static DEFINE_PER_CPU(struct work_struct, mce_work);
+
+/* Do initial initialization of a struct mce */
+void mce_setup(struct mce *m)
+{
+	memset(m, 0, sizeof(struct mce));
+	m->cpu = m->extcpu = smp_processor_id();
+	rdtscll(m->tsc);
+	/* We hope get_seconds stays lockless */
+	m->time = get_seconds();
+	m->cpuvendor = boot_cpu_data.x86_vendor;
+	m->cpuid = cpuid_eax(1);
+#ifdef CONFIG_SMP
+	m->socketid = cpu_data(m->extcpu).phys_proc_id;
+#endif
+	m->apicid = cpu_data(m->extcpu).initial_apicid;
+	rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap);
+}
+
+DEFINE_PER_CPU(struct mce, injectm);
+EXPORT_PER_CPU_SYMBOL_GPL(injectm);
+
+/*
+ * Lockless MCE logging infrastructure.
+ * This avoids deadlocks on printk locks without having to break locks. Also
+ * separate MCEs from kernel messages to avoid bogus bug reports.
+ */
+
+static struct mce_log mcelog = {
+	.signature	= MCE_LOG_SIGNATURE,
+	.len		= MCE_LOG_LEN,
+	.recordlen	= sizeof(struct mce),
+};
+
+void mce_log(struct mce *mce)
+{
+	unsigned next, entry;
+
+	mce->finished = 0;
+	wmb();
+	for (;;) {
+		entry = rcu_dereference(mcelog.next);
+		for (;;) {
+			/*
+			 * When the buffer fills up discard new entries.
+			 * Assume that the earlier errors are the more
+			 * interesting ones:
+			 */
+			if (entry >= MCE_LOG_LEN) {
+				set_bit(MCE_OVERFLOW,
+					(unsigned long *)&mcelog.flags);
+				return;
+			}
+			/* Old left over entry. Skip: */
+			if (mcelog.entry[entry].finished) {
+				entry++;
+				continue;
+			}
+			break;
+		}
+		smp_rmb();
+		next = entry + 1;
+		if (cmpxchg(&mcelog.next, entry, next) == entry)
+			break;
+	}
+	memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
+	wmb();
+	mcelog.entry[entry].finished = 1;
+	wmb();
+
+	mce->finished = 1;
+	set_bit(0, &notify_user);
+}
+
+static void print_mce(struct mce *m)
+{
+	printk(KERN_EMERG
+	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+	       m->extcpu, m->mcgstatus, m->bank, m->status);
+	if (m->ip) {
+		printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
+		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
+		       m->cs, m->ip);
+		if (m->cs == __KERNEL_CS)
+			print_symbol("{%s}", m->ip);
+		printk("\n");
+	}
+	printk(KERN_EMERG "TSC %llx ", m->tsc);
+	if (m->addr)
+		printk("ADDR %llx ", m->addr);
+	if (m->misc)
+		printk("MISC %llx ", m->misc);
+	printk("\n");
+	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+			m->cpuvendor, m->cpuid, m->time, m->socketid,
+			m->apicid);
+}
+
+static void print_mce_head(void)
+{
+	printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+}
+
+static void print_mce_tail(void)
+{
+	printk(KERN_EMERG "This is not a software problem!\n"
+	       KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+}
+
+#define PANIC_TIMEOUT 5 /* 5 seconds */
+
+static atomic_t mce_paniced;
+
+/* Panic in progress. Enable interrupts and wait for final IPI */
+static void wait_for_panic(void)
+{
+	long timeout = PANIC_TIMEOUT*USEC_PER_SEC;
+	preempt_disable();
+	local_irq_enable();
+	while (timeout-- > 0)
+		udelay(1);
+	if (panic_timeout == 0)
+		panic_timeout = mce_panic_timeout;
+	panic("Panicing machine check CPU died");
+}
+
+static void mce_panic(char *msg, struct mce *final, char *exp)
+{
+	int i;
+
+	/*
+	 * Make sure only one CPU runs in machine check panic
+	 */
+	if (atomic_add_return(1, &mce_paniced) > 1)
+		wait_for_panic();
+	barrier();
+
+	bust_spinlocks(1);
+	console_verbose();
+	print_mce_head();
+	/* First print corrected ones that are still unlogged */
+	for (i = 0; i < MCE_LOG_LEN; i++) {
+		struct mce *m = &mcelog.entry[i];
+		if (!(m->status & MCI_STATUS_VAL))
+			continue;
+		if (!(m->status & MCI_STATUS_UC))
+			print_mce(m);
+	}
+	/* Now print uncorrected but with the final one last */
+	for (i = 0; i < MCE_LOG_LEN; i++) {
+		struct mce *m = &mcelog.entry[i];
+		if (!(m->status & MCI_STATUS_VAL))
+			continue;
+		if (!(m->status & MCI_STATUS_UC))
+			continue;
+		if (!final || memcmp(m, final, sizeof(struct mce)))
+			print_mce(m);
+	}
+	if (final)
+		print_mce(final);
+	if (cpu_missing)
+		printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n");
+	print_mce_tail();
+	if (exp)
+		printk(KERN_EMERG "Machine check: %s\n", exp);
+	if (panic_timeout == 0)
+		panic_timeout = mce_panic_timeout;
+	panic(msg);
+}
+
+/* Support code for software error injection */
+
+static int msr_to_offset(u32 msr)
+{
+	unsigned bank = __get_cpu_var(injectm.bank);
+	if (msr == rip_msr)
+		return offsetof(struct mce, ip);
+	if (msr == MSR_IA32_MC0_STATUS + bank*4)
+		return offsetof(struct mce, status);
+	if (msr == MSR_IA32_MC0_ADDR + bank*4)
+		return offsetof(struct mce, addr);
+	if (msr == MSR_IA32_MC0_MISC + bank*4)
+		return offsetof(struct mce, misc);
+	if (msr == MSR_IA32_MCG_STATUS)
+		return offsetof(struct mce, mcgstatus);
+	return -1;
+}
+
+/* MSR access wrappers used for error injection */
+static u64 mce_rdmsrl(u32 msr)
+{
+	u64 v;
+	if (__get_cpu_var(injectm).finished) {
+		int offset = msr_to_offset(msr);
+		if (offset < 0)
+			return 0;
+		return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
+	}
+	rdmsrl(msr, v);
+	return v;
+}
+
+static void mce_wrmsrl(u32 msr, u64 v)
+{
+	if (__get_cpu_var(injectm).finished) {
+		int offset = msr_to_offset(msr);
+		if (offset >= 0)
+			*(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
+		return;
+	}
+	wrmsrl(msr, v);
+}
+
+/*
+ * Simple lockless ring to communicate PFNs from the exception handler with the
+ * process context work function. This is vastly simplified because there's
+ * only a single reader and a single writer.
+ */
+#define MCE_RING_SIZE 16	/* we use one entry less */
+
+struct mce_ring {
+	unsigned short start;
+	unsigned short end;
+	unsigned long ring[MCE_RING_SIZE];
+};
+static DEFINE_PER_CPU(struct mce_ring, mce_ring);
+
+/* Runs with CPU affinity in workqueue */
+static int mce_ring_empty(void)
+{
+	struct mce_ring *r = &__get_cpu_var(mce_ring);
+
+	return r->start == r->end;
+}
+
+static int mce_ring_get(unsigned long *pfn)
+{
+	struct mce_ring *r;
+	int ret = 0;
+
+	*pfn = 0;
+	get_cpu();
+	r = &__get_cpu_var(mce_ring);
+	if (r->start == r->end)
+		goto out;
+	*pfn = r->ring[r->start];
+	r->start = (r->start + 1) % MCE_RING_SIZE;
+	ret = 1;
+out:
+	put_cpu();
+	return ret;
+}
+
+/* Always runs in MCE context with preempt off */
+static int mce_ring_add(unsigned long pfn)
+{
+	struct mce_ring *r = &__get_cpu_var(mce_ring);
+	unsigned next;
+
+	next = (r->end + 1) % MCE_RING_SIZE;
+	if (next == r->start)
+		return -1;
+	r->ring[r->end] = pfn;
+	wmb();
+	r->end = next;
+	return 0;
+}
+
+int mce_available(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled)
+		return 0;
+	return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
+}
+
+static void mce_schedule_work(void)
+{
+	if (!mce_ring_empty()) {
+		struct work_struct *work = &__get_cpu_var(mce_work);
+		if (!work_pending(work))
+			schedule_work(work);
+	}
+}
+
+/*
+ * Get the address of the instruction at the time of the machine check
+ * error.
+ */
+static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
+{
+
+	if (regs && (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV))) {
+		m->ip = regs->ip;
+		m->cs = regs->cs;
+	} else {
+		m->ip = 0;
+		m->cs = 0;
+	}
+	if (rip_msr)
+		m->ip = mce_rdmsrl(rip_msr);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC 
+/*
+ * Called after interrupts have been reenabled again
+ * when a MCE happened during an interrupts off region
+ * in the kernel.
+ */
+asmlinkage void smp_mce_self_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+	exit_idle();
+	irq_enter();
+	mce_notify_irq();
+	mce_schedule_work();
+	irq_exit();
+}
+#endif
+
+static void mce_report_event(struct pt_regs *regs)
+{
+	if (regs->flags & (X86_VM_MASK|X86_EFLAGS_IF)) {
+		mce_notify_irq();
+		/*
+		 * Triggering the work queue here is just an insurance
+		 * policy in case the syscall exit notify handler
+		 * doesn't run soon enough or ends up running on the
+		 * wrong CPU (can happen when audit sleeps)
+		 */
+		mce_schedule_work();
+		return;
+	}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * Without APIC do not notify. The event will be picked
+	 * up eventually.
+	 */
+	if (!cpu_has_apic)
+		return;
+
+	/*
+	 * When interrupts are disabled we cannot use
+	 * kernel services safely. Trigger an self interrupt
+	 * through the APIC to instead do the notification
+	 * after interrupts are reenabled again.
+	 */
+	apic->send_IPI_self(MCE_SELF_VECTOR);
+
+	/*
+	 * Wait for idle afterwards again so that we don't leave the
+	 * APIC in a non idle state because the normal APIC writes
+	 * cannot exclude us.
+	 */
+	apic_wait_icr_idle();
+#endif
+}
+
+DEFINE_PER_CPU(unsigned, mce_poll_count);
+
+/*
+ * Poll for corrected events or events that happened before reset.
+ * Those are just logged through /dev/mcelog.
+ *
+ * This is executed in standard interrupt context.
+ *
+ * Note: spec recommends to panic for fatal unsignalled
+ * errors here. However this would be quite problematic --
+ * we would need to reimplement the Monarch handling and
+ * it would mess up the exclusion between exception handler
+ * and poll hander -- * so we skip this for now.
+ * These cases should not happen anyways, or only when the CPU
+ * is already totally * confused. In this case it's likely it will
+ * not fully execute the machine check handler either.
+ */
+void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
+{
+	struct mce m;
+	int i;
+
+	__get_cpu_var(mce_poll_count)++;
+
+	mce_setup(&m);
+
+	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+	for (i = 0; i < banks; i++) {
+		if (!bank[i] || !test_bit(i, *b))
+			continue;
+
+		m.misc = 0;
+		m.addr = 0;
+		m.bank = i;
+		m.tsc = 0;
+
+		barrier();
+		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		if (!(m.status & MCI_STATUS_VAL))
+			continue;
+
+		/*
+		 * Uncorrected or signalled events are handled by the exception
+		 * handler when it is enabled, so don't process those here.
+		 *
+		 * TBD do the same check for MCI_STATUS_EN here?
+		 */
+		if (!(flags & MCP_UC) &&
+		    (m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)))
+			continue;
+
+		if (m.status & MCI_STATUS_MISCV)
+			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+		if (m.status & MCI_STATUS_ADDRV)
+			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+
+		if (!(flags & MCP_TIMESTAMP))
+			m.tsc = 0;
+		/*
+		 * Don't get the IP here because it's unlikely to
+		 * have anything to do with the actual error location.
+		 */
+		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
+			mce_log(&m);
+			add_taint(TAINT_MACHINE_CHECK);
+		}
+
+		/*
+		 * Clear state for this bank.
+		 */
+		mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+	}
+
+	/*
+	 * Don't clear MCG_STATUS here because it's only defined for
+	 * exceptions.
+	 */
+
+	sync_core();
+}
+EXPORT_SYMBOL_GPL(machine_check_poll);
+
+/*
+ * Do a quick check if any of the events requires a panic.
+ * This decides if we keep the events around or clear them.
+ */
+static int mce_no_way_out(struct mce *m, char **msg)
+{
+	int i;
+
+	for (i = 0; i < banks; i++) {
+		m->status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Variable to establish order between CPUs while scanning.
+ * Each CPU spins initially until executing is equal its number.
+ */
+static atomic_t mce_executing;
+
+/*
+ * Defines order of CPUs on entry. First CPU becomes Monarch.
+ */
+static atomic_t mce_callin;
+
+/*
+ * Check if a timeout waiting for other CPUs happened.
+ */
+static int mce_timed_out(u64 *t)
+{
+	/*
+	 * The others already did panic for some reason.
+	 * Bail out like in a timeout.
+	 * rmb() to tell the compiler that system_state
+	 * might have been modified by someone else.
+	 */
+	rmb();
+	if (atomic_read(&mce_paniced))
+		wait_for_panic();
+	if (!monarch_timeout)
+		goto out;
+	if ((s64)*t < SPINUNIT) {
+		/* CHECKME: Make panic default for 1 too? */
+		if (tolerant < 1)
+			mce_panic("Timeout synchronizing machine check over CPUs",
+				  NULL, NULL);
+		cpu_missing = 1;
+		return 1;
+	}
+	*t -= SPINUNIT;
+out:
+	touch_nmi_watchdog();
+	return 0;
+}
+
+/*
+ * The Monarch's reign.  The Monarch is the CPU who entered
+ * the machine check handler first. It waits for the others to
+ * raise the exception too and then grades them. When any
+ * error is fatal panic. Only then let the others continue.
+ *
+ * The other CPUs entering the MCE handler will be controlled by the
+ * Monarch. They are called Subjects.
+ *
+ * This way we prevent any potential data corruption in a unrecoverable case
+ * and also makes sure always all CPU's errors are examined.
+ *
+ * Also this detects the case of an machine check event coming from outer
+ * space (not detected by any CPUs) In this case some external agent wants
+ * us to shut down, so panic too.
+ *
+ * The other CPUs might still decide to panic if the handler happens
+ * in a unrecoverable place, but in this case the system is in a semi-stable
+ * state and won't corrupt anything by itself. It's ok to let the others
+ * continue for a bit first.
+ *
+ * All the spin loops have timeouts; when a timeout happens a CPU
+ * typically elects itself to be Monarch.
+ */
+static void mce_reign(void)
+{
+	int cpu;
+	struct mce *m = NULL;
+	int global_worst = 0;
+	char *msg = NULL;
+	char *nmsg = NULL;
+
+	/*
+	 * This CPU is the Monarch and the other CPUs have run
+	 * through their handlers.
+	 * Grade the severity of the errors of all the CPUs.
+	 */
+	for_each_possible_cpu(cpu) {
+		int severity = mce_severity(&per_cpu(mces_seen, cpu), tolerant,
+					    &nmsg);
+		if (severity > global_worst) {
+			msg = nmsg;
+			global_worst = severity;
+			m = &per_cpu(mces_seen, cpu);
+		}
+	}
+
+	/*
+	 * Cannot recover? Panic here then.
+	 * This dumps all the mces in the log buffer and stops the
+	 * other CPUs.
+	 */
+	if (m && global_worst >= MCE_PANIC_SEVERITY && tolerant < 3)
+		mce_panic("Fatal Machine check", m, msg);
+
+	/*
+	 * For UC somewhere we let the CPU who detects it handle it.
+	 * Also must let continue the others, otherwise the handling
+	 * CPU could deadlock on a lock.
+	 */
+
+	/*
+	 * No machine check event found. Must be some external
+	 * source or one CPU is hung. Panic.
+	 */
+	if (!m && tolerant < 3)
+		mce_panic("Machine check from unknown source", NULL, NULL);
+
+	/*
+	 * Now clear all the mces_seen so that they don't reappear on
+	 * the next mce.
+	 */
+	for_each_possible_cpu(cpu)
+		memset(&per_cpu(mces_seen, cpu), 0, sizeof(struct mce));
+}
+
+static atomic_t global_nwo;
+
+/*
+ * Start of Monarch synchronization. This waits until all CPUs have
+ * entered the exception handler and then determines if any of them
+ * saw a fatal event that requires panic. Then it executes them
+ * in the entry order.
+ * TBD double check parallel CPU hotunplug
+ */
+static int mce_start(int no_way_out, int *order)
+{
+	int nwo;
+	int cpus = num_online_cpus();
+	u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
+
+	if (!timeout) {
+		*order = -1;
+		return no_way_out;
+	}
+
+	atomic_add(no_way_out, &global_nwo);
+
+	/*
+	 * Wait for everyone.
+	 */
+	while (atomic_read(&mce_callin) != cpus) {
+		if (mce_timed_out(&timeout)) {
+			atomic_set(&global_nwo, 0);
+			*order = -1;
+			return no_way_out;
+		}
+		ndelay(SPINUNIT);
+	}
+
+	/*
+	 * Cache the global no_way_out state.
+	 */
+	nwo = atomic_read(&global_nwo);
+
+	/*
+	 * Monarch starts executing now, the others wait.
+	 */
+	if (*order == 1) {
+		atomic_set(&mce_executing, 1);
+		return nwo;
+	}
+
+	/*
+	 * Now start the scanning loop one by one
+	 * in the original callin order.
+	 * This way when there are any shared banks it will
+	 * be only seen by one CPU before cleared, avoiding duplicates.
+	 */
+	while (atomic_read(&mce_executing) < *order) {
+		if (mce_timed_out(&timeout)) {
+			atomic_set(&global_nwo, 0);
+			*order = -1;
+			return no_way_out;
+		}
+		ndelay(SPINUNIT);
+	}
+	return nwo;
+}
+
+/*
+ * Synchronize between CPUs after main scanning loop.
+ * This invokes the bulk of the Monarch processing.
+ */
+static int mce_end(int order)
+{
+	int ret = -1;
+	u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
+
+	if (!timeout)
+		goto reset;
+	if (order < 0)
+		goto reset;
+
+	/*
+	 * Allow others to run.
+	 */
+	atomic_inc(&mce_executing);
+
+	if (order == 1) {
+		/* CHECKME: Can this race with a parallel hotplug? */
+		int cpus = num_online_cpus();
+
+		/*
+		 * Monarch: Wait for everyone to go through their scanning
+		 * loops.
+		 */
+		while (atomic_read(&mce_executing) <= cpus) {
+			if (mce_timed_out(&timeout))
+				goto reset;
+			ndelay(SPINUNIT);
+		}
+
+		mce_reign();
+		barrier();
+		ret = 0;
+	} else {
+		/*
+		 * Subject: Wait for Monarch to finish.
+		 */
+		while (atomic_read(&mce_executing) != 0) {
+			if (mce_timed_out(&timeout))
+				goto reset;
+			ndelay(SPINUNIT);
+		}
+
+		/*
+		 * Don't reset anything. That's done by the Monarch.
+		 */
+		return 0;
+	}
+
+	/*
+	 * Reset all global state.
+	 */
+reset:
+	atomic_set(&global_nwo, 0);
+	atomic_set(&mce_callin, 0);
+	barrier();
+
+	/*
+	 * Let others run again.
+	 */
+	atomic_set(&mce_executing, 0);
+	return ret;
+}
+
+/*
+ * Check if the address reported by the CPU is in a format we can parse.
+ * It would be possible to add code for most other cases, but all would
+ * be somewhat complicated (e.g. segment offset would require an instruction
+ * parser). So only support physical addresses upto page granuality for now.
+ */
+static int mce_usable_address(struct mce *m)
+{
+	if (!(m->status & MCI_STATUS_MISCV) || !(m->status & MCI_STATUS_ADDRV))
+		return 0;
+	if ((m->misc & 0x3f) > PAGE_SHIFT)
+		return 0;
+	if (((m->misc >> 6) & 7) != MCM_ADDR_PHYS)
+		return 0;
+	return 1;
+}
+
+static void mce_clear_state(unsigned long *toclear)
+{
+	int i;
+
+	for (i = 0; i < banks; i++) {
+		if (test_bit(i, toclear))
+			mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+	}
+}
+
+/*
+ * The actual machine check handler. This only handles real
+ * exceptions when something got corrupted coming in through int 18.
+ *
+ * This is executed in NMI context not subject to normal locking rules. This
+ * implies that most kernel services cannot be safely used. Don't even
+ * think about putting a printk in there!
+ *
+ * On Intel systems this is entered on all CPUs in parallel through
+ * MCE broadcast. However some CPUs might be broken beyond repair,
+ * so be always careful when synchronizing with others.
+ */
+void do_machine_check(struct pt_regs *regs, long error_code)
+{
+	struct mce m, *final;
+	int i;
+	int worst = 0;
+	int severity;
+	/*
+	 * Establish sequential order between the CPUs entering the machine
+	 * check handler.
+	 */
+	int order;
+
+	/*
+	 * If no_way_out gets set, there is no safe way to recover from this
+	 * MCE.  If tolerant is cranked up, we'll try anyway.
+	 */
+	int no_way_out = 0;
+	/*
+	 * If kill_it gets set, there might be a way to recover from this
+	 * error.
+	 */
+	int kill_it = 0;
+	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
+	char *msg = "Unknown";
+
+	atomic_inc(&mce_entry);
+
+	__get_cpu_var(mce_exception_count)++;
+
+	if (notify_die(DIE_NMI, "machine check", regs, error_code,
+			   18, SIGKILL) == NOTIFY_STOP)
+		goto out;
+	if (!banks)
+		goto out;
+
+	order = atomic_add_return(1, &mce_callin);
+	mce_setup(&m);
+
+	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+	no_way_out = mce_no_way_out(&m, &msg);
+
+	final = &__get_cpu_var(mces_seen);
+	*final = m;
+
+	barrier();
+
+	/*
+	 * When no restart IP must always kill or panic.
+	 */
+	if (!(m.mcgstatus & MCG_STATUS_RIPV))
+		kill_it = 1;
+
+	/*
+	 * Go through all the banks in exclusion of the other CPUs.
+	 * This way we don't report duplicated events on shared banks
+	 * because the first one to see it will clear it.
+	 */
+	no_way_out = mce_start(no_way_out, &order);
+	for (i = 0; i < banks; i++) {
+		__clear_bit(i, toclear);
+		if (!bank[i])
+			continue;
+
+		m.misc = 0;
+		m.addr = 0;
+		m.bank = i;
+
+		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		if ((m.status & MCI_STATUS_VAL) == 0)
+			continue;
+
+		/*
+		 * Non uncorrected or non signaled errors are handled by
+		 * machine_check_poll. Leave them alone, unless this panics.
+		 */
+		if (!(m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)) &&
+			!no_way_out)
+			continue;
+
+		/*
+		 * Set taint even when machine check was not enabled.
+		 */
+		add_taint(TAINT_MACHINE_CHECK);
+
+		severity = mce_severity(&m, tolerant, NULL);
+
+		/*
+		 * When machine check was for corrected handler don't touch,
+		 * unless we're panicing.
+		 */
+		if (severity == MCE_KEEP_SEVERITY && !no_way_out)
+			continue;
+		__set_bit(i, toclear);
+		if (severity == MCE_NO_SEVERITY) {
+			/*
+			 * Machine check event was not enabled. Clear, but
+			 * ignore.
+			 */
+			continue;
+		}
+
+		/*
+		 * Kill on action required.
+		 */
+		if (severity == MCE_AR_SEVERITY)
+			kill_it = 1;
+
+		if (m.status & MCI_STATUS_MISCV)
+			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+		if (m.status & MCI_STATUS_ADDRV)
+			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+
+		/*
+		 * Action optional error. Queue address for later processing.
+		 * When the ring overflows we just ignore the AO error.
+		 * RED-PEN add some logging mechanism when
+		 * usable_address or mce_add_ring fails.
+		 * RED-PEN don't ignore overflow for tolerant == 0
+		 */
+		if (severity == MCE_AO_SEVERITY && mce_usable_address(&m))
+			mce_ring_add(m.addr >> PAGE_SHIFT);
+
+		mce_get_rip(&m, regs);
+		mce_log(&m);
+
+		if (severity > worst) {
+			*final = m;
+			worst = severity;
+		}
+	}
+
+	if (!no_way_out)
+		mce_clear_state(toclear);
+
+	/*
+	 * Do most of the synchronization with other CPUs.
+	 * When there's any problem use only local no_way_out state.
+	 */
+	if (mce_end(order) < 0)
+		no_way_out = worst >= MCE_PANIC_SEVERITY;
+
+	/*
+	 * If we have decided that we just CAN'T continue, and the user
+	 * has not set tolerant to an insane level, give up and die.
+	 *
+	 * This is mainly used in the case when the system doesn't
+	 * support MCE broadcasting or it has been disabled.
+	 */
+	if (no_way_out && tolerant < 3)
+		mce_panic("Fatal machine check on current CPU", final, msg);
+
+	/*
+	 * If the error seems to be unrecoverable, something should be
+	 * done.  Try to kill as little as possible.  If we can kill just
+	 * one task, do that.  If the user has set the tolerance very
+	 * high, don't try to do anything at all.
+	 */
+
+	if (kill_it && tolerant < 3)
+		force_sig(SIGBUS, current);
+
+	/* notify userspace ASAP */
+	set_thread_flag(TIF_MCE_NOTIFY);
+
+	if (worst > 0)
+		mce_report_event(regs);
+	mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
+out:
+	atomic_dec(&mce_entry);
+	sync_core();
+}
+EXPORT_SYMBOL_GPL(do_machine_check);
+
+/* dummy to break dependency. actual code is in mm/memory-failure.c */
+void __attribute__((weak)) memory_failure(unsigned long pfn, int vector)
+{
+	printk(KERN_ERR "Action optional memory failure at %lx ignored\n", pfn);
+}
+
+/*
+ * Called after mce notification in process context. This code
+ * is allowed to sleep. Call the high level VM handler to process
+ * any corrupted pages.
+ * Assume that the work queue code only calls this one at a time
+ * per CPU.
+ * Note we don't disable preemption, so this code might run on the wrong
+ * CPU. In this case the event is picked up by the scheduled work queue.
+ * This is merely a fast path to expedite processing in some common
+ * cases.
+ */
+void mce_notify_process(void)
+{
+	unsigned long pfn;
+	mce_notify_irq();
+	while (mce_ring_get(&pfn))
+		memory_failure(pfn, MCE_VECTOR);
+}
+
+static void mce_process_work(struct work_struct *dummy)
+{
+	mce_notify_process();
+}
+
+#ifdef CONFIG_X86_MCE_INTEL
+/***
+ * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
+ * @cpu: The CPU on which the event occurred.
+ * @status: Event status information
+ *
+ * This function should be called by the thermal interrupt after the
+ * event has been processed and the decision was made to log the event
+ * further.
+ *
+ * The status parameter will be saved to the 'status' field of 'struct mce'
+ * and historically has been the register value of the
+ * MSR_IA32_THERMAL_STATUS (Intel) msr.
+ */
+void mce_log_therm_throt_event(__u64 status)
+{
+	struct mce m;
+
+	mce_setup(&m);
+	m.bank = MCE_THERMAL_BANK;
+	m.status = status;
+	mce_log(&m);
+}
+#endif /* CONFIG_X86_MCE_INTEL */
+
+/*
+ * Periodic polling timer for "silent" machine check errors.  If the
+ * poller finds an MCE, poll 2x faster.  When the poller finds no more
+ * errors, poll 2x slower (up to check_interval seconds).
+ */
+static int check_interval = 5 * 60; /* 5 minutes */
+
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
+static DEFINE_PER_CPU(struct timer_list, mce_timer);
+
+static void mcheck_timer(unsigned long data)
+{
+	struct timer_list *t = &per_cpu(mce_timer, data);
+	int *n;
+
+	WARN_ON(smp_processor_id() != data);
+
+	if (mce_available(&current_cpu_data)) {
+		machine_check_poll(MCP_TIMESTAMP,
+				&__get_cpu_var(mce_poll_banks));
+	}
+
+	/*
+	 * Alert userspace if needed.  If we logged an MCE, reduce the
+	 * polling interval, otherwise increase the polling interval.
+	 */
+	n = &__get_cpu_var(next_interval);
+	if (mce_notify_irq())
+		*n = max(*n/2, HZ/100);
+	else
+		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
+
+	t->expires = jiffies + *n;
+	add_timer(t);
+}
+
+static void mce_do_trigger(struct work_struct *work)
+{
+	call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
+}
+
+static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
+
+/*
+ * Notify the user(s) about new machine check events.
+ * Can be called from interrupt context, but not from machine check/NMI
+ * context.
+ */
+int mce_notify_irq(void)
+{
+	/* Not more than two messages every minute */
+	static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2);
+
+	clear_thread_flag(TIF_MCE_NOTIFY);
+
+	if (test_and_clear_bit(0, &notify_user)) {
+		wake_up_interruptible(&mce_wait);
+
+		/*
+		 * There is no risk of missing notifications because
+		 * work_pending is always cleared before the function is
+		 * executed.
+		 */
+		if (trigger[0] && !work_pending(&mce_trigger_work))
+			schedule_work(&mce_trigger_work);
+
+		if (__ratelimit(&ratelimit))
+			printk(KERN_INFO "Machine check events logged\n");
+
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mce_notify_irq);
+
+/*
+ * Initialize Machine Checks for a CPU.
+ */
+static int mce_cap_init(void)
+{
+	unsigned b;
+	u64 cap;
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+
+	b = cap & MCG_BANKCNT_MASK;
+	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+
+	if (b > MAX_NR_BANKS) {
+		printk(KERN_WARNING
+		       "MCE: Using only %u machine check banks out of %u\n",
+			MAX_NR_BANKS, b);
+		b = MAX_NR_BANKS;
+	}
+
+	/* Don't support asymmetric configurations today */
+	WARN_ON(banks != 0 && b != banks);
+	banks = b;
+	if (!bank) {
+		bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
+		if (!bank)
+			return -ENOMEM;
+		memset(bank, 0xff, banks * sizeof(u64));
+	}
+
+	/* Use accurate RIP reporting if available. */
+	if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9)
+		rip_msr = MSR_IA32_MCG_EIP;
+
+	if (cap & MCG_SER_P)
+		mce_ser = 1;
+
+	return 0;
+}
+
+static void mce_init(void)
+{
+	mce_banks_t all_banks;
+	u64 cap;
+	int i;
+
+	/*
+	 * Log the machine checks left over from the previous reset.
+	 */
+	bitmap_fill(all_banks, MAX_NR_BANKS);
+	machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
+
+	set_in_cr4(X86_CR4_MCE);
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	if (cap & MCG_CTL_P)
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+
+	for (i = 0; i < banks; i++) {
+		if (skip_bank_init(i))
+			continue;
+		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+	}
+}
+
+/* Add per CPU specific workarounds here */
+static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+{
+	/* This should be disabled by the BIOS, but isn't always */
+	if (c->x86_vendor == X86_VENDOR_AMD) {
+		if (c->x86 == 15 && banks > 4) {
+			/*
+			 * disable GART TBL walk error reporting, which
+			 * trips off incorrectly with the IOMMU & 3ware
+			 * & Cerberus:
+			 */
+			clear_bit(10, (unsigned long *)&bank[4]);
+		}
+		if (c->x86 <= 17 && mce_bootlog < 0) {
+			/*
+			 * Lots of broken BIOS around that don't clear them
+			 * by default and leave crap in there. Don't log:
+			 */
+			mce_bootlog = 0;
+		}
+		/*
+		 * Various K7s with broken bank 0 around. Always disable
+		 * by default.
+		 */
+		 if (c->x86 == 6)
+			bank[0] = 0;
+	}
+
+	if (c->x86_vendor == X86_VENDOR_INTEL) {
+		/*
+		 * SDM documents that on family 6 bank 0 should not be written
+		 * because it aliases to another special BIOS controlled
+		 * register.
+		 * But it's not aliased anymore on model 0x1a+
+		 * Don't ignore bank 0 completely because there could be a
+		 * valid event later, merely don't write CTL0.
+		 */
+
+		if (c->x86 == 6 && c->x86_model < 0x1A)
+			__set_bit(0, &dont_init_banks);
+
+		/*
+		 * All newer Intel systems support MCE broadcasting. Enable
+		 * synchronization with a one second timeout.
+		 */
+		if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
+			monarch_timeout < 0)
+			monarch_timeout = USEC_PER_SEC;
+	}
+	if (monarch_timeout < 0)
+		monarch_timeout = 0;
+	if (mce_bootlog != 0)
+		mce_panic_timeout = 30;
+}
+
+static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
+{
+	if (c->x86 != 5)
+		return;
+	switch (c->x86_vendor) {
+	case X86_VENDOR_INTEL:
+		if (mce_p5_enabled())
+			intel_p5_mcheck_init(c);
+		break;
+	case X86_VENDOR_CENTAUR:
+		winchip_mcheck_init(c);
+		break;
+	}
+}
+
+static void mce_cpu_features(struct cpuinfo_x86 *c)
+{
+	switch (c->x86_vendor) {
+	case X86_VENDOR_INTEL:
+		mce_intel_feature_init(c);
+		break;
+	case X86_VENDOR_AMD:
+		mce_amd_feature_init(c);
+		break;
+	default:
+		break;
+	}
+}
+
+static void mce_init_timer(void)
+{
+	struct timer_list *t = &__get_cpu_var(mce_timer);
+	int *n = &__get_cpu_var(next_interval);
+
+	if (mce_ignore_ce)
+		return;
+
+	*n = check_interval * HZ;
+	if (!*n)
+		return;
+	setup_timer(t, mcheck_timer, smp_processor_id());
+	t->expires = round_jiffies(jiffies + *n);
+	add_timer(t);
+}
+
+/*
+ * Called for each booted CPU to set up machine checks.
+ * Must be called with preempt off:
+ */
+void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled)
+		return;
+
+	mce_ancient_init(c);
+
+	if (!mce_available(c))
+		return;
+
+	if (mce_cap_init() < 0) {
+		mce_disabled = 1;
+		return;
+	}
+	mce_cpu_quirks(c);
+
+	machine_check_vector = do_machine_check;
+
+	mce_init();
+	mce_cpu_features(c);
+	mce_init_timer();
+	INIT_WORK(&__get_cpu_var(mce_work), mce_process_work);
+}
+
+/*
+ * Character device to read and clear the MCE log.
+ */
+
+static DEFINE_SPINLOCK(mce_state_lock);
+static int		open_count;		/* #times opened */
+static int		open_exclu;		/* already open exclusive? */
+
+static int mce_open(struct inode *inode, struct file *file)
+{
+	spin_lock(&mce_state_lock);
+
+	if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
+		spin_unlock(&mce_state_lock);
+
+		return -EBUSY;
+	}
+
+	if (file->f_flags & O_EXCL)
+		open_exclu = 1;
+	open_count++;
+
+	spin_unlock(&mce_state_lock);
+
+	return nonseekable_open(inode, file);
+}
+
+static int mce_release(struct inode *inode, struct file *file)
+{
+	spin_lock(&mce_state_lock);
+
+	open_count--;
+	open_exclu = 0;
+
+	spin_unlock(&mce_state_lock);
+
+	return 0;
+}
+
+static void collect_tscs(void *data)
+{
+	unsigned long *cpu_tsc = (unsigned long *)data;
+
+	rdtscll(cpu_tsc[smp_processor_id()]);
+}
+
+static DEFINE_MUTEX(mce_read_mutex);
+
+static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
+			loff_t *off)
+{
+	char __user *buf = ubuf;
+	unsigned long *cpu_tsc;
+	unsigned prev, next;
+	int i, err;
+
+	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
+	if (!cpu_tsc)
+		return -ENOMEM;
+
+	mutex_lock(&mce_read_mutex);
+	next = rcu_dereference(mcelog.next);
+
+	/* Only supports full reads right now */
+	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
+		mutex_unlock(&mce_read_mutex);
+		kfree(cpu_tsc);
+
+		return -EINVAL;
+	}
+
+	err = 0;
+	prev = 0;
+	do {
+		for (i = prev; i < next; i++) {
+			unsigned long start = jiffies;
+
+			while (!mcelog.entry[i].finished) {
+				if (time_after_eq(jiffies, start + 2)) {
+					memset(mcelog.entry + i, 0,
+					       sizeof(struct mce));
+					goto timeout;
+				}
+				cpu_relax();
+			}
+			smp_rmb();
+			err |= copy_to_user(buf, mcelog.entry + i,
+					    sizeof(struct mce));
+			buf += sizeof(struct mce);
+timeout:
+			;
+		}
+
+		memset(mcelog.entry + prev, 0,
+		       (next - prev) * sizeof(struct mce));
+		prev = next;
+		next = cmpxchg(&mcelog.next, prev, 0);
+	} while (next != prev);
+
+	synchronize_sched();
+
+	/*
+	 * Collect entries that were still getting written before the
+	 * synchronize.
+	 */
+	on_each_cpu(collect_tscs, cpu_tsc, 1);
+
+	for (i = next; i < MCE_LOG_LEN; i++) {
+		if (mcelog.entry[i].finished &&
+		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
+			err |= copy_to_user(buf, mcelog.entry+i,
+					    sizeof(struct mce));
+			smp_rmb();
+			buf += sizeof(struct mce);
+			memset(&mcelog.entry[i], 0, sizeof(struct mce));
+		}
+	}
+	mutex_unlock(&mce_read_mutex);
+	kfree(cpu_tsc);
+
+	return err ? -EFAULT : buf - ubuf;
+}
+
+static unsigned int mce_poll(struct file *file, poll_table *wait)
+{
+	poll_wait(file, &mce_wait, wait);
+	if (rcu_dereference(mcelog.next))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+	int __user *p = (int __user *)arg;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	switch (cmd) {
+	case MCE_GET_RECORD_LEN:
+		return put_user(sizeof(struct mce), p);
+	case MCE_GET_LOG_LEN:
+		return put_user(MCE_LOG_LEN, p);
+	case MCE_GETCLEAR_FLAGS: {
+		unsigned flags;
+
+		do {
+			flags = mcelog.flags;
+		} while (cmpxchg(&mcelog.flags, flags, 0) != flags);
+
+		return put_user(flags, p);
+	}
+	default:
+		return -ENOTTY;
+	}
+}
+
+/* Modified in mce-inject.c, so not static or const */
+struct file_operations mce_chrdev_ops = {
+	.open			= mce_open,
+	.release		= mce_release,
+	.read			= mce_read,
+	.poll			= mce_poll,
+	.unlocked_ioctl		= mce_ioctl,
+};
+EXPORT_SYMBOL_GPL(mce_chrdev_ops);
+
+static struct miscdevice mce_log_device = {
+	MISC_MCELOG_MINOR,
+	"mcelog",
+	&mce_chrdev_ops,
+};
+
+/*
+ * mce=off Disables machine check
+ * mce=no_cmci Disables CMCI
+ * mce=dont_log_ce Clears corrected events silently, no log created for CEs.
+ * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared.
+ * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above)
+ *	monarchtimeout is how long to wait for other CPUs on machine
+ *	check, or 0 to not wait
+ * mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
+ * mce=nobootlog Don't log MCEs from before booting.
+ */
+static int __init mcheck_enable(char *str)
+{
+	if (*str == 0)
+		enable_p5_mce();
+	if (*str == '=')
+		str++;
+	if (!strcmp(str, "off"))
+		mce_disabled = 1;
+	else if (!strcmp(str, "no_cmci"))
+		mce_cmci_disabled = 1;
+	else if (!strcmp(str, "dont_log_ce"))
+		mce_dont_log_ce = 1;
+	else if (!strcmp(str, "ignore_ce"))
+		mce_ignore_ce = 1;
+	else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
+		mce_bootlog = (str[0] == 'b');
+	else if (isdigit(str[0])) {
+		get_option(&str, &tolerant);
+		if (*str == ',') {
+			++str;
+			get_option(&str, &monarch_timeout);
+		}
+	} else {
+		printk(KERN_INFO "mce argument %s ignored. Please use /sys\n",
+		       str);
+		return 0;
+	}
+	return 1;
+}
+__setup("mce", mcheck_enable);
+
+/*
+ * Sysfs support
+ */
+
+/*
+ * Disable machine checks on suspend and shutdown. We can't really handle
+ * them later.
+ */
+static int mce_disable(void)
+{
+	int i;
+
+	for (i = 0; i < banks; i++) {
+		if (!skip_bank_init(i))
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+	}
+	return 0;
+}
+
+static int mce_suspend(struct sys_device *dev, pm_message_t state)
+{
+	return mce_disable();
+}
+
+static int mce_shutdown(struct sys_device *dev)
+{
+	return mce_disable();
+}
+
+/*
+ * On resume clear all MCE state. Don't want to see leftovers from the BIOS.
+ * Only one CPU is active at this time, the others get re-added later using
+ * CPU hotplug:
+ */
+static int mce_resume(struct sys_device *dev)
+{
+	mce_init();
+	mce_cpu_features(&current_cpu_data);
+
+	return 0;
+}
+
+static void mce_cpu_restart(void *data)
+{
+	del_timer_sync(&__get_cpu_var(mce_timer));
+	if (mce_available(&current_cpu_data))
+		mce_init();
+	mce_init_timer();
+}
+
+/* Reinit MCEs after user configuration changes */
+static void mce_restart(void)
+{
+	on_each_cpu(mce_cpu_restart, NULL, 1);
+}
+
+static struct sysdev_class mce_sysclass = {
+	.suspend	= mce_suspend,
+	.shutdown	= mce_shutdown,
+	.resume		= mce_resume,
+	.name		= "machinecheck",
+};
+
+DEFINE_PER_CPU(struct sys_device, mce_dev);
+
+__cpuinitdata
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+static struct sysdev_attribute *bank_attrs;
+
+static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
+			 char *buf)
+{
+	u64 b = bank[attr - bank_attrs];
+
+	return sprintf(buf, "%llx\n", b);
+}
+
+static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
+			const char *buf, size_t size)
+{
+	u64 new;
+
+	if (strict_strtoull(buf, 0, &new) < 0)
+		return -EINVAL;
+
+	bank[attr - bank_attrs] = new;
+	mce_restart();
+
+	return size;
+}
+
+static ssize_t
+show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf)
+{
+	strcpy(buf, trigger);
+	strcat(buf, "\n");
+	return strlen(trigger) + 1;
+}
+
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				const char *buf, size_t siz)
+{
+	char *p;
+	int len;
+
+	strncpy(trigger, buf, sizeof(trigger));
+	trigger[sizeof(trigger)-1] = 0;
+	len = strlen(trigger);
+	p = strchr(trigger, '\n');
+
+	if (*p)
+		*p = 0;
+
+	return len;
+}
+
+static ssize_t store_int_with_restart(struct sys_device *s,
+				      struct sysdev_attribute *attr,
+				      const char *buf, size_t size)
+{
+	ssize_t ret = sysdev_store_int(s, attr, buf, size);
+	mce_restart();
+	return ret;
+}
+
+static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
+static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
+
+static struct sysdev_ext_attribute attr_check_interval = {
+	_SYSDEV_ATTR(check_interval, 0644, sysdev_show_int,
+		     store_int_with_restart),
+	&check_interval
+};
+
+static struct sysdev_attribute *mce_attrs[] = {
+	&attr_tolerant.attr, &attr_check_interval.attr, &attr_trigger,
+	&attr_monarch_timeout.attr,
+	NULL
+};
+
+static cpumask_var_t mce_dev_initialized;
+
+/* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */
+static __cpuinit int mce_create_device(unsigned int cpu)
+{
+	int err;
+	int i;
+
+	if (!mce_available(&boot_cpu_data))
+		return -EIO;
+
+	memset(&per_cpu(mce_dev, cpu).kobj, 0, sizeof(struct kobject));
+	per_cpu(mce_dev, cpu).id	= cpu;
+	per_cpu(mce_dev, cpu).cls	= &mce_sysclass;
+
+	err = sysdev_register(&per_cpu(mce_dev, cpu));
+	if (err)
+		return err;
+
+	for (i = 0; mce_attrs[i]; i++) {
+		err = sysdev_create_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+		if (err)
+			goto error;
+	}
+	for (i = 0; i < banks; i++) {
+		err = sysdev_create_file(&per_cpu(mce_dev, cpu),
+					&bank_attrs[i]);
+		if (err)
+			goto error2;
+	}
+	cpumask_set_cpu(cpu, mce_dev_initialized);
+
+	return 0;
+error2:
+	while (--i >= 0)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+error:
+	while (--i >= 0)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+
+	sysdev_unregister(&per_cpu(mce_dev, cpu));
+
+	return err;
+}
+
+static __cpuinit void mce_remove_device(unsigned int cpu)
+{
+	int i;
+
+	if (!cpumask_test_cpu(cpu, mce_dev_initialized))
+		return;
+
+	for (i = 0; mce_attrs[i]; i++)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+
+	for (i = 0; i < banks; i++)
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+
+	sysdev_unregister(&per_cpu(mce_dev, cpu));
+	cpumask_clear_cpu(cpu, mce_dev_initialized);
+}
+
+/* Make sure there are no machine checks on offlined CPUs. */
+static void mce_disable_cpu(void *h)
+{
+	unsigned long action = *(unsigned long *)h;
+	int i;
+
+	if (!mce_available(&current_cpu_data))
+		return;
+	if (!(action & CPU_TASKS_FROZEN))
+		cmci_clear();
+	for (i = 0; i < banks; i++) {
+		if (!skip_bank_init(i))
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+	}
+}
+
+static void mce_reenable_cpu(void *h)
+{
+	unsigned long action = *(unsigned long *)h;
+	int i;
+
+	if (!mce_available(&current_cpu_data))
+		return;
+
+	if (!(action & CPU_TASKS_FROZEN))
+		cmci_reenable();
+	for (i = 0; i < banks; i++) {
+		if (!skip_bank_init(i))
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
+	}
+}
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static int __cpuinit
+mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct timer_list *t = &per_cpu(mce_timer, cpu);
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		mce_create_device(cpu);
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
+		break;
+	case CPU_DEAD:
+	case CPU_DEAD_FROZEN:
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
+		mce_remove_device(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		del_timer_sync(t);
+		smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
+		break;
+	case CPU_DOWN_FAILED:
+	case CPU_DOWN_FAILED_FROZEN:
+		t->expires = round_jiffies(jiffies +
+						__get_cpu_var(next_interval));
+		add_timer_on(t, cpu);
+		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
+		break;
+	case CPU_POST_DEAD:
+		/* intentionally ignoring frozen here */
+		cmci_rediscover(cpu);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mce_cpu_notifier __cpuinitdata = {
+	.notifier_call = mce_cpu_callback,
+};
+
+static __init int mce_init_banks(void)
+{
+	int i;
+
+	bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
+				GFP_KERNEL);
+	if (!bank_attrs)
+		return -ENOMEM;
+
+	for (i = 0; i < banks; i++) {
+		struct sysdev_attribute *a = &bank_attrs[i];
+
+		a->attr.name	= kasprintf(GFP_KERNEL, "bank%d", i);
+		if (!a->attr.name)
+			goto nomem;
+
+		a->attr.mode	= 0644;
+		a->show		= show_bank;
+		a->store	= set_bank;
+	}
+	return 0;
+
+nomem:
+	while (--i >= 0)
+		kfree(bank_attrs[i].attr.name);
+	kfree(bank_attrs);
+	bank_attrs = NULL;
+
+	return -ENOMEM;
+}
+
+static __init int mce_init_device(void)
+{
+	int err;
+	int i = 0;
+
+	if (!mce_available(&boot_cpu_data))
+		return -EIO;
+
+	alloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
+
+	err = mce_init_banks();
+	if (err)
+		return err;
+
+	err = sysdev_class_register(&mce_sysclass);
+	if (err)
+		return err;
+
+	for_each_online_cpu(i) {
+		err = mce_create_device(i);
+		if (err)
+			return err;
+	}
+
+	register_hotcpu_notifier(&mce_cpu_notifier);
+	misc_register(&mce_log_device);
+
+	return err;
+}
+
+device_initcall(mce_init_device);
+
+#else /* CONFIG_X86_OLD_MCE: */
+
+int nr_mce_banks;
+EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
+
+/* This has to be run for each processor */
+void mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled == 1)
+		return;
+
+	switch (c->x86_vendor) {
+	case X86_VENDOR_AMD:
+		amd_mcheck_init(c);
+		break;
+
+	case X86_VENDOR_INTEL:
+		if (c->x86 == 5)
+			intel_p5_mcheck_init(c);
+		if (c->x86 == 6)
+			intel_p6_mcheck_init(c);
+		if (c->x86 == 15)
+			intel_p4_mcheck_init(c);
+		break;
+
+	case X86_VENDOR_CENTAUR:
+		if (c->x86 == 5)
+			winchip_mcheck_init(c);
+		break;
+
+	default:
+		break;
+	}
+	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
+}
+
+static int __init mcheck_enable(char *str)
+{
+	mce_disabled = -1;
+	return 1;
+}
+
+__setup("mce", mcheck_enable);
+
+#endif /* CONFIG_X86_OLD_MCE */
+
+/*
+ * Old style boot options parsing. Only for compatibility.
+ */
+static int __init mcheck_disable(char *str)
+{
+	mce_disabled = 1;
+	return 1;
+}
+__setup("nomce", mcheck_disable);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h
index ae9f628838f..84a552b458c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.h
+++ b/arch/x86/kernel/cpu/mcheck/mce.h
@@ -1,14 +1,38 @@
 #include <linux/init.h>
 #include <asm/mce.h>
 
+#ifdef CONFIG_X86_OLD_MCE
 void amd_mcheck_init(struct cpuinfo_x86 *c);
 void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+#endif
+
+#ifdef CONFIG_X86_ANCIENT_MCE
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void winchip_mcheck_init(struct cpuinfo_x86 *c);
+extern int mce_p5_enable;
+static inline int mce_p5_enabled(void) { return mce_p5_enable; }
+static inline void enable_p5_mce(void) { mce_p5_enable = 1; }
+#else
+static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline int mce_p5_enabled(void) { return 0; }
+static inline void enable_p5_mce(void) { }
+#endif
 
 /* Call the installed machine check handler for this CPU setup. */
 extern void (*machine_check_vector)(struct pt_regs *, long error_code);
 
+#ifdef CONFIG_X86_OLD_MCE
+
 extern int nr_mce_banks;
 
+void intel_set_thermal_handler(void);
+
+#else
+
+static inline void intel_set_thermal_handler(void) { }
+
+#endif
+
+void intel_init_thermal(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_32.c b/arch/x86/kernel/cpu/mcheck/mce_32.c
deleted file mode 100644
index 3552119b091..00000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_32.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * mce.c - x86 Machine Check Exception Reporting
- * (c) 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>, Dave Jones <davej@redhat.com>
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/thread_info.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-
-#include "mce.h"
-
-int mce_disabled;
-int nr_mce_banks;
-
-EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
-
-/* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs *regs, long error_code)
-{
-	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
-}
-
-/* Call the installed machine check handler for this CPU setup. */
-void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
-
-/* This has to be run for each processor */
-void mcheck_init(struct cpuinfo_x86 *c)
-{
-	if (mce_disabled == 1)
-		return;
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		if (c->x86 == 5)
-			intel_p5_mcheck_init(c);
-		if (c->x86 == 6)
-			intel_p6_mcheck_init(c);
-		if (c->x86 == 15)
-			intel_p4_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		if (c->x86 == 5)
-			winchip_mcheck_init(c);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static int __init mcheck_disable(char *str)
-{
-	mce_disabled = 1;
-	return 1;
-}
-
-static int __init mcheck_enable(char *str)
-{
-	mce_disabled = -1;
-	return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
deleted file mode 100644
index 6fb0b359d2a..00000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ /dev/null
@@ -1,1187 +0,0 @@
-/*
- * Machine check handler.
- * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
- * Rest from unknown author(s).
- * 2004 Andi Kleen. Rewrote most of it.
- * Copyright 2008 Intel Corporation
- * Author: Andi Kleen
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/string.h>
-#include <linux/rcupdate.h>
-#include <linux/kallsyms.h>
-#include <linux/sysdev.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/cpu.h>
-#include <linux/percpu.h>
-#include <linux/poll.h>
-#include <linux/thread_info.h>
-#include <linux/ctype.h>
-#include <linux/kmod.h>
-#include <linux/kdebug.h>
-#include <linux/kobject.h>
-#include <linux/sysfs.h>
-#include <linux/ratelimit.h>
-#include <asm/processor.h>
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/idle.h>
-
-#define MISC_MCELOG_MINOR 227
-
-atomic_t mce_entry;
-
-static int mce_dont_init;
-
-/*
- * Tolerant levels:
- *   0: always panic on uncorrected errors, log corrected errors
- *   1: panic or SIGBUS on uncorrected errors, log corrected errors
- *   2: SIGBUS or log uncorrected errors (if possible), log corrected errors
- *   3: never panic or SIGBUS, log all errors (for testing only)
- */
-static int tolerant = 1;
-static int banks;
-static u64 *bank;
-static unsigned long notify_user;
-static int rip_msr;
-static int mce_bootlog = -1;
-static atomic_t mce_events;
-
-static char trigger[128];
-static char *trigger_argv[2] = { trigger, NULL };
-
-static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
-
-/* MCA banks polled by the period polling timer for corrected events */
-DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
-	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
-};
-
-/* Do initial initialization of a struct mce */
-void mce_setup(struct mce *m)
-{
-	memset(m, 0, sizeof(struct mce));
-	m->cpu = smp_processor_id();
-	rdtscll(m->tsc);
-}
-
-/*
- * Lockless MCE logging infrastructure.
- * This avoids deadlocks on printk locks without having to break locks. Also
- * separate MCEs from kernel messages to avoid bogus bug reports.
- */
-
-static struct mce_log mcelog = {
-	MCE_LOG_SIGNATURE,
-	MCE_LOG_LEN,
-};
-
-void mce_log(struct mce *mce)
-{
-	unsigned next, entry;
-	atomic_inc(&mce_events);
-	mce->finished = 0;
-	wmb();
-	for (;;) {
-		entry = rcu_dereference(mcelog.next);
-		for (;;) {
-			/* When the buffer fills up discard new entries. Assume
-			   that the earlier errors are the more interesting. */
-			if (entry >= MCE_LOG_LEN) {
-				set_bit(MCE_OVERFLOW, (unsigned long *)&mcelog.flags);
-				return;
-			}
-			/* Old left over entry. Skip. */
-			if (mcelog.entry[entry].finished) {
-				entry++;
-				continue;
-			}
-			break;
-		}
-		smp_rmb();
-		next = entry + 1;
-		if (cmpxchg(&mcelog.next, entry, next) == entry)
-			break;
-	}
-	memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
-	wmb();
-	mcelog.entry[entry].finished = 1;
-	wmb();
-
-	set_bit(0, &notify_user);
-}
-
-static void print_mce(struct mce *m)
-{
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "HARDWARE ERROR\n"
-	       KERN_EMERG
-	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
-	       m->cpu, m->mcgstatus, m->bank, m->status);
-	if (m->ip) {
-		printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
-		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
-		       m->cs, m->ip);
-		if (m->cs == __KERNEL_CS)
-			print_symbol("{%s}", m->ip);
-		printk("\n");
-	}
-	printk(KERN_EMERG "TSC %llx ", m->tsc);
-	if (m->addr)
-		printk("ADDR %llx ", m->addr);
-	if (m->misc)
-		printk("MISC %llx ", m->misc);
-	printk("\n");
-	printk(KERN_EMERG "This is not a software problem!\n");
-	printk(KERN_EMERG "Run through mcelog --ascii to decode "
-	       "and contact your hardware vendor\n");
-}
-
-static void mce_panic(char *msg, struct mce *backup, unsigned long start)
-{
-	int i;
-
-	oops_begin();
-	for (i = 0; i < MCE_LOG_LEN; i++) {
-		unsigned long tsc = mcelog.entry[i].tsc;
-
-		if (time_before(tsc, start))
-			continue;
-		print_mce(&mcelog.entry[i]);
-		if (backup && mcelog.entry[i].tsc == backup->tsc)
-			backup = NULL;
-	}
-	if (backup)
-		print_mce(backup);
-	panic(msg);
-}
-
-int mce_available(struct cpuinfo_x86 *c)
-{
-	if (mce_dont_init)
-		return 0;
-	return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
-}
-
-static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
-{
-	if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) {
-		m->ip = regs->ip;
-		m->cs = regs->cs;
-	} else {
-		m->ip = 0;
-		m->cs = 0;
-	}
-	if (rip_msr) {
-		/* Assume the RIP in the MSR is exact. Is this true? */
-		m->mcgstatus |= MCG_STATUS_EIPV;
-		rdmsrl(rip_msr, m->ip);
-		m->cs = 0;
-	}
-}
-
-/*
- * Poll for corrected events or events that happened before reset.
- * Those are just logged through /dev/mcelog.
- *
- * This is executed in standard interrupt context.
- */
-void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
-{
-	struct mce m;
-	int i;
-
-	mce_setup(&m);
-
-	rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
-	for (i = 0; i < banks; i++) {
-		if (!bank[i] || !test_bit(i, *b))
-			continue;
-
-		m.misc = 0;
-		m.addr = 0;
-		m.bank = i;
-		m.tsc = 0;
-
-		barrier();
-		rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
-		if (!(m.status & MCI_STATUS_VAL))
-			continue;
-
-		/*
-		 * Uncorrected events are handled by the exception handler
-		 * when it is enabled. But when the exception is disabled log
-		 * everything.
-		 *
-		 * TBD do the same check for MCI_STATUS_EN here?
-		 */
-		if ((m.status & MCI_STATUS_UC) && !(flags & MCP_UC))
-			continue;
-
-		if (m.status & MCI_STATUS_MISCV)
-			rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
-		if (m.status & MCI_STATUS_ADDRV)
-			rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
-		if (!(flags & MCP_TIMESTAMP))
-			m.tsc = 0;
-		/*
-		 * Don't get the IP here because it's unlikely to
-		 * have anything to do with the actual error location.
-		 */
-		if (!(flags & MCP_DONTLOG)) {
-			mce_log(&m);
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-
-		/*
-		 * Clear state for this bank.
-		 */
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}
-
-	/*
-	 * Don't clear MCG_STATUS here because it's only defined for
-	 * exceptions.
-	 */
-}
-
-/*
- * The actual machine check handler. This only handles real
- * exceptions when something got corrupted coming in through int 18.
- *
- * This is executed in NMI context not subject to normal locking rules. This
- * implies that most kernel services cannot be safely used. Don't even
- * think about putting a printk in there!
- */
-void do_machine_check(struct pt_regs * regs, long error_code)
-{
-	struct mce m, panicm;
-	u64 mcestart = 0;
-	int i;
-	int panicm_found = 0;
-	/*
-	 * If no_way_out gets set, there is no safe way to recover from this
-	 * MCE.  If tolerant is cranked up, we'll try anyway.
-	 */
-	int no_way_out = 0;
-	/*
-	 * If kill_it gets set, there might be a way to recover from this
-	 * error.
-	 */
-	int kill_it = 0;
-	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
-
-	atomic_inc(&mce_entry);
-
-	if (notify_die(DIE_NMI, "machine check", regs, error_code,
-			   18, SIGKILL) == NOTIFY_STOP)
-		goto out2;
-	if (!banks)
-		goto out2;
-
-	mce_setup(&m);
-
-	rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
-	/* if the restart IP is not valid, we're done for */
-	if (!(m.mcgstatus & MCG_STATUS_RIPV))
-		no_way_out = 1;
-
-	rdtscll(mcestart);
-	barrier();
-
-	for (i = 0; i < banks; i++) {
-		__clear_bit(i, toclear);
-		if (!bank[i])
-			continue;
-
-		m.misc = 0;
-		m.addr = 0;
-		m.bank = i;
-
-		rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
-		if ((m.status & MCI_STATUS_VAL) == 0)
-			continue;
-
-		/*
-		 * Non uncorrected errors are handled by machine_check_poll
-		 * Leave them alone.
-		 */
-		if ((m.status & MCI_STATUS_UC) == 0)
-			continue;
-
-		/*
-		 * Set taint even when machine check was not enabled.
-		 */
-		add_taint(TAINT_MACHINE_CHECK);
-
-		__set_bit(i, toclear);
-
-		if (m.status & MCI_STATUS_EN) {
-			/* if PCC was set, there's no way out */
-			no_way_out |= !!(m.status & MCI_STATUS_PCC);
-			/*
-			 * If this error was uncorrectable and there was
-			 * an overflow, we're in trouble.  If no overflow,
-			 * we might get away with just killing a task.
-			 */
-			if (m.status & MCI_STATUS_UC) {
-				if (tolerant < 1 || m.status & MCI_STATUS_OVER)
-					no_way_out = 1;
-				kill_it = 1;
-			}
-		} else {
-			/*
-			 * Machine check event was not enabled. Clear, but
-			 * ignore.
-			 */
-			continue;
-		}
-
-		if (m.status & MCI_STATUS_MISCV)
-			rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
-		if (m.status & MCI_STATUS_ADDRV)
-			rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
-		mce_get_rip(&m, regs);
-		mce_log(&m);
-
-		/* Did this bank cause the exception? */
-		/* Assume that the bank with uncorrectable errors did it,
-		   and that there is only a single one. */
-		if ((m.status & MCI_STATUS_UC) && (m.status & MCI_STATUS_EN)) {
-			panicm = m;
-			panicm_found = 1;
-		}
-	}
-
-	/* If we didn't find an uncorrectable error, pick
-	   the last one (shouldn't happen, just being safe). */
-	if (!panicm_found)
-		panicm = m;
-
-	/*
-	 * If we have decided that we just CAN'T continue, and the user
-	 *  has not set tolerant to an insane level, give up and die.
-	 */
-	if (no_way_out && tolerant < 3)
-		mce_panic("Machine check", &panicm, mcestart);
-
-	/*
-	 * If the error seems to be unrecoverable, something should be
-	 * done.  Try to kill as little as possible.  If we can kill just
-	 * one task, do that.  If the user has set the tolerance very
-	 * high, don't try to do anything at all.
-	 */
-	if (kill_it && tolerant < 3) {
-		int user_space = 0;
-
-		/*
-		 * If the EIPV bit is set, it means the saved IP is the
-		 * instruction which caused the MCE.
-		 */
-		if (m.mcgstatus & MCG_STATUS_EIPV)
-			user_space = panicm.ip && (panicm.cs & 3);
-
-		/*
-		 * If we know that the error was in user space, send a
-		 * SIGBUS.  Otherwise, panic if tolerance is low.
-		 *
-		 * force_sig() takes an awful lot of locks and has a slight
-		 * risk of deadlocking.
-		 */
-		if (user_space) {
-			force_sig(SIGBUS, current);
-		} else if (panic_on_oops || tolerant < 2) {
-			mce_panic("Uncorrected machine check",
-				&panicm, mcestart);
-		}
-	}
-
-	/* notify userspace ASAP */
-	set_thread_flag(TIF_MCE_NOTIFY);
-
-	/* the last thing we do is clear state */
-	for (i = 0; i < banks; i++) {
-		if (test_bit(i, toclear))
-			wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}
-	wrmsrl(MSR_IA32_MCG_STATUS, 0);
- out2:
-	atomic_dec(&mce_entry);
-}
-
-#ifdef CONFIG_X86_MCE_INTEL
-/***
- * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
- * @cpu: The CPU on which the event occurred.
- * @status: Event status information
- *
- * This function should be called by the thermal interrupt after the
- * event has been processed and the decision was made to log the event
- * further.
- *
- * The status parameter will be saved to the 'status' field of 'struct mce'
- * and historically has been the register value of the
- * MSR_IA32_THERMAL_STATUS (Intel) msr.
- */
-void mce_log_therm_throt_event(__u64 status)
-{
-	struct mce m;
-
-	mce_setup(&m);
-	m.bank = MCE_THERMAL_BANK;
-	m.status = status;
-	mce_log(&m);
-}
-#endif /* CONFIG_X86_MCE_INTEL */
-
-/*
- * Periodic polling timer for "silent" machine check errors.  If the
- * poller finds an MCE, poll 2x faster.  When the poller finds no more
- * errors, poll 2x slower (up to check_interval seconds).
- */
-
-static int check_interval = 5 * 60; /* 5 minutes */
-static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
-static void mcheck_timer(unsigned long);
-static DEFINE_PER_CPU(struct timer_list, mce_timer);
-
-static void mcheck_timer(unsigned long data)
-{
-	struct timer_list *t = &per_cpu(mce_timer, data);
-	int *n;
-
-	WARN_ON(smp_processor_id() != data);
-
-	if (mce_available(&current_cpu_data))
-		machine_check_poll(MCP_TIMESTAMP,
-				&__get_cpu_var(mce_poll_banks));
-
-	/*
-	 * Alert userspace if needed.  If we logged an MCE, reduce the
-	 * polling interval, otherwise increase the polling interval.
-	 */
-	n = &__get_cpu_var(next_interval);
-	if (mce_notify_user()) {
-		*n = max(*n/2, HZ/100);
-	} else {
-		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
-	}
-
-	t->expires = jiffies + *n;
-	add_timer(t);
-}
-
-static void mce_do_trigger(struct work_struct *work)
-{
-	call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
-}
-
-static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
-
-/*
- * Notify the user(s) about new machine check events.
- * Can be called from interrupt context, but not from machine check/NMI
- * context.
- */
-int mce_notify_user(void)
-{
-	/* Not more than two messages every minute */
-	static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2);
-
-	clear_thread_flag(TIF_MCE_NOTIFY);
-	if (test_and_clear_bit(0, &notify_user)) {
-		wake_up_interruptible(&mce_wait);
-
-		/*
-		 * There is no risk of missing notifications because
-		 * work_pending is always cleared before the function is
-		 * executed.
-		 */
-		if (trigger[0] && !work_pending(&mce_trigger_work))
-			schedule_work(&mce_trigger_work);
-
-		if (__ratelimit(&ratelimit))
-			printk(KERN_INFO "Machine check events logged\n");
-
-		return 1;
-	}
-	return 0;
-}
-
-/* see if the idle task needs to notify userspace */
-static int
-mce_idle_callback(struct notifier_block *nfb, unsigned long action, void *junk)
-{
-	/* IDLE_END should be safe - interrupts are back on */
-	if (action == IDLE_END && test_thread_flag(TIF_MCE_NOTIFY))
-		mce_notify_user();
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mce_idle_notifier = {
-	.notifier_call = mce_idle_callback,
-};
-
-static __init int periodic_mcheck_init(void)
-{
-       idle_notifier_register(&mce_idle_notifier);
-       return 0;
-}
-__initcall(periodic_mcheck_init);
-
-/*
- * Initialize Machine Checks for a CPU.
- */
-static int mce_cap_init(void)
-{
-	u64 cap;
-	unsigned b;
-
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	b = cap & 0xff;
-	if (b > MAX_NR_BANKS) {
-		printk(KERN_WARNING
-		       "MCE: Using only %u machine check banks out of %u\n",
-			MAX_NR_BANKS, b);
-		b = MAX_NR_BANKS;
-	}
-
-	/* Don't support asymmetric configurations today */
-	WARN_ON(banks != 0 && b != banks);
-	banks = b;
-	if (!bank) {
-		bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
-		if (!bank)
-			return -ENOMEM;
-		memset(bank, 0xff, banks * sizeof(u64));
-	}
-
-	/* Use accurate RIP reporting if available. */
-	if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9)
-		rip_msr = MSR_IA32_MCG_EIP;
-
-	return 0;
-}
-
-static void mce_init(void *dummy)
-{
-	u64 cap;
-	int i;
-	mce_banks_t all_banks;
-
-	/*
-	 * Log the machine checks left over from the previous reset.
-	 */
-	bitmap_fill(all_banks, MAX_NR_BANKS);
-	machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
-
-	set_in_cr4(X86_CR4_MCE);
-
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	if (cap & MCG_CTL_P)
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-
-	for (i = 0; i < banks; i++) {
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}
-}
-
-/* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
-{
-	/* This should be disabled by the BIOS, but isn't always */
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		if (c->x86 == 15 && banks > 4)
-			/* disable GART TBL walk error reporting, which trips off
-			   incorrectly with the IOMMU & 3ware & Cerberus. */
-			clear_bit(10, (unsigned long *)&bank[4]);
-		if(c->x86 <= 17 && mce_bootlog < 0)
-			/* Lots of broken BIOS around that don't clear them
-			   by default and leave crap in there. Don't log. */
-			mce_bootlog = 0;
-	}
-
-}
-
-static void mce_cpu_features(struct cpuinfo_x86 *c)
-{
-	switch (c->x86_vendor) {
-	case X86_VENDOR_INTEL:
-		mce_intel_feature_init(c);
-		break;
-	case X86_VENDOR_AMD:
-		mce_amd_feature_init(c);
-		break;
-	default:
-		break;
-	}
-}
-
-static void mce_init_timer(void)
-{
-	struct timer_list *t = &__get_cpu_var(mce_timer);
-	int *n = &__get_cpu_var(next_interval);
-
-	*n = check_interval * HZ;
-	if (!*n)
-		return;
-	setup_timer(t, mcheck_timer, smp_processor_id());
-	t->expires = round_jiffies(jiffies + *n);
-	add_timer(t);
-}
-
-/*
- * Called for each booted CPU to set up machine checks.
- * Must be called with preempt off.
- */
-void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
-{
-	if (!mce_available(c))
-		return;
-
-	if (mce_cap_init() < 0) {
-		mce_dont_init = 1;
-		return;
-	}
-	mce_cpu_quirks(c);
-
-	mce_init(NULL);
-	mce_cpu_features(c);
-	mce_init_timer();
-}
-
-/*
- * Character device to read and clear the MCE log.
- */
-
-static DEFINE_SPINLOCK(mce_state_lock);
-static int open_count;	/* #times opened */
-static int open_exclu;	/* already open exclusive? */
-
-static int mce_open(struct inode *inode, struct file *file)
-{
-	lock_kernel();
-	spin_lock(&mce_state_lock);
-
-	if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
-		spin_unlock(&mce_state_lock);
-		unlock_kernel();
-		return -EBUSY;
-	}
-
-	if (file->f_flags & O_EXCL)
-		open_exclu = 1;
-	open_count++;
-
-	spin_unlock(&mce_state_lock);
-	unlock_kernel();
-
-	return nonseekable_open(inode, file);
-}
-
-static int mce_release(struct inode *inode, struct file *file)
-{
-	spin_lock(&mce_state_lock);
-
-	open_count--;
-	open_exclu = 0;
-
-	spin_unlock(&mce_state_lock);
-
-	return 0;
-}
-
-static void collect_tscs(void *data)
-{
-	unsigned long *cpu_tsc = (unsigned long *)data;
-
-	rdtscll(cpu_tsc[smp_processor_id()]);
-}
-
-static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
-			loff_t *off)
-{
-	unsigned long *cpu_tsc;
-	static DEFINE_MUTEX(mce_read_mutex);
-	unsigned prev, next;
-	char __user *buf = ubuf;
-	int i, err;
-
-	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
-	if (!cpu_tsc)
-		return -ENOMEM;
-
-	mutex_lock(&mce_read_mutex);
-	next = rcu_dereference(mcelog.next);
-
-	/* Only supports full reads right now */
-	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
-		mutex_unlock(&mce_read_mutex);
-		kfree(cpu_tsc);
-		return -EINVAL;
-	}
-
-	err = 0;
-	prev = 0;
-	do {
-		for (i = prev; i < next; i++) {
-			unsigned long start = jiffies;
-
-			while (!mcelog.entry[i].finished) {
-				if (time_after_eq(jiffies, start + 2)) {
-					memset(mcelog.entry + i, 0,
-					       sizeof(struct mce));
-					goto timeout;
-				}
-				cpu_relax();
-			}
-			smp_rmb();
-			err |= copy_to_user(buf, mcelog.entry + i,
-					    sizeof(struct mce));
-			buf += sizeof(struct mce);
-timeout:
-			;
-		}
-
-		memset(mcelog.entry + prev, 0,
-		       (next - prev) * sizeof(struct mce));
-		prev = next;
-		next = cmpxchg(&mcelog.next, prev, 0);
-	} while (next != prev);
-
-	synchronize_sched();
-
-	/*
-	 * Collect entries that were still getting written before the
-	 * synchronize.
-	 */
-	on_each_cpu(collect_tscs, cpu_tsc, 1);
-	for (i = next; i < MCE_LOG_LEN; i++) {
-		if (mcelog.entry[i].finished &&
-		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
-			err |= copy_to_user(buf, mcelog.entry+i,
-					    sizeof(struct mce));
-			smp_rmb();
-			buf += sizeof(struct mce);
-			memset(&mcelog.entry[i], 0, sizeof(struct mce));
-		}
-	}
-	mutex_unlock(&mce_read_mutex);
-	kfree(cpu_tsc);
-	return err ? -EFAULT : buf - ubuf;
-}
-
-static unsigned int mce_poll(struct file *file, poll_table *wait)
-{
-	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference(mcelog.next))
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
-{
-	int __user *p = (int __user *)arg;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	switch (cmd) {
-	case MCE_GET_RECORD_LEN:
-		return put_user(sizeof(struct mce), p);
-	case MCE_GET_LOG_LEN:
-		return put_user(MCE_LOG_LEN, p);
-	case MCE_GETCLEAR_FLAGS: {
-		unsigned flags;
-
-		do {
-			flags = mcelog.flags;
-		} while (cmpxchg(&mcelog.flags, flags, 0) != flags);
-		return put_user(flags, p);
-	}
-	default:
-		return -ENOTTY;
-	}
-}
-
-static const struct file_operations mce_chrdev_ops = {
-	.open = mce_open,
-	.release = mce_release,
-	.read = mce_read,
-	.poll = mce_poll,
-	.unlocked_ioctl = mce_ioctl,
-};
-
-static struct miscdevice mce_log_device = {
-	MISC_MCELOG_MINOR,
-	"mcelog",
-	&mce_chrdev_ops,
-};
-
-/*
- * Old style boot options parsing. Only for compatibility.
- */
-static int __init mcheck_disable(char *str)
-{
-	mce_dont_init = 1;
-	return 1;
-}
-
-/* mce=off disables machine check.
-   mce=TOLERANCELEVEL (number, see above)
-   mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
-   mce=nobootlog Don't log MCEs from before booting. */
-static int __init mcheck_enable(char *str)
-{
-	if (!strcmp(str, "off"))
-		mce_dont_init = 1;
-	else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog"))
-		mce_bootlog = str[0] == 'b';
-	else if (isdigit(str[0]))
-		get_option(&str, &tolerant);
-	else
-		printk("mce= argument %s ignored. Please use /sys", str);
-	return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce=", mcheck_enable);
-
-/*
- * Sysfs support
- */
-
-/*
- * Disable machine checks on suspend and shutdown. We can't really handle
- * them later.
- */
-static int mce_disable(void)
-{
-	int i;
-
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
-	return 0;
-}
-
-static int mce_suspend(struct sys_device *dev, pm_message_t state)
-{
-	return mce_disable();
-}
-
-static int mce_shutdown(struct sys_device *dev)
-{
-	return mce_disable();
-}
-
-/* On resume clear all MCE state. Don't want to see leftovers from the BIOS.
-   Only one CPU is active at this time, the others get readded later using
-   CPU hotplug. */
-static int mce_resume(struct sys_device *dev)
-{
-	mce_init(NULL);
-	mce_cpu_features(&current_cpu_data);
-	return 0;
-}
-
-static void mce_cpu_restart(void *data)
-{
-	del_timer_sync(&__get_cpu_var(mce_timer));
-	if (mce_available(&current_cpu_data))
-		mce_init(NULL);
-	mce_init_timer();
-}
-
-/* Reinit MCEs after user configuration changes */
-static void mce_restart(void)
-{
-	on_each_cpu(mce_cpu_restart, NULL, 1);
-}
-
-static struct sysdev_class mce_sysclass = {
-	.suspend = mce_suspend,
-	.shutdown = mce_shutdown,
-	.resume = mce_resume,
-	.name = "machinecheck",
-};
-
-DEFINE_PER_CPU(struct sys_device, device_mce);
-void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
-
-/* Why are there no generic functions for this? */
-#define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s,		\
-				     struct sysdev_attribute *attr,	\
-				     char *buf) {			\
-		return sprintf(buf, "%lx\n", (unsigned long)var);	\
-	}								\
-	static ssize_t set_ ## name(struct sys_device *s,		\
-				    struct sysdev_attribute *attr,	\
-				    const char *buf, size_t siz) {	\
-		char *end;						\
-		unsigned long new = simple_strtoul(buf, &end, 0);	\
-		if (end == buf) return -EINVAL;				\
-		var = new;						\
-		start;							\
-		return end-buf;						\
-	}								\
-	static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
-
-static struct sysdev_attribute *bank_attrs;
-
-static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
-			 char *buf)
-{
-	u64 b = bank[attr - bank_attrs];
-	return sprintf(buf, "%llx\n", b);
-}
-
-static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
-			const char *buf, size_t siz)
-{
-	char *end;
-	u64 new = simple_strtoull(buf, &end, 0);
-	if (end == buf)
-		return -EINVAL;
-	bank[attr - bank_attrs] = new;
-	mce_restart();
-	return end-buf;
-}
-
-static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
-				char *buf)
-{
-	strcpy(buf, trigger);
-	strcat(buf, "\n");
-	return strlen(trigger) + 1;
-}
-
-static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
-				const char *buf,size_t siz)
-{
-	char *p;
-	int len;
-	strncpy(trigger, buf, sizeof(trigger));
-	trigger[sizeof(trigger)-1] = 0;
-	len = strlen(trigger);
-	p = strchr(trigger, '\n');
-	if (*p) *p = 0;
-	return len;
-}
-
-static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
-ACCESSOR(check_interval,check_interval,mce_restart())
-static struct sysdev_attribute *mce_attributes[] = {
-	&attr_tolerant.attr, &attr_check_interval, &attr_trigger,
-	NULL
-};
-
-static cpumask_var_t mce_device_initialized;
-
-/* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
-static __cpuinit int mce_create_device(unsigned int cpu)
-{
-	int err;
-	int i;
-
-	if (!mce_available(&boot_cpu_data))
-		return -EIO;
-
-	memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
-	per_cpu(device_mce,cpu).id = cpu;
-	per_cpu(device_mce,cpu).cls = &mce_sysclass;
-
-	err = sysdev_register(&per_cpu(device_mce,cpu));
-	if (err)
-		return err;
-
-	for (i = 0; mce_attributes[i]; i++) {
-		err = sysdev_create_file(&per_cpu(device_mce,cpu),
-					 mce_attributes[i]);
-		if (err)
-			goto error;
-	}
-	for (i = 0; i < banks; i++) {
-		err = sysdev_create_file(&per_cpu(device_mce, cpu),
-					&bank_attrs[i]);
-		if (err)
-			goto error2;
-	}
-	cpumask_set_cpu(cpu, mce_device_initialized);
-
-	return 0;
-error2:
-	while (--i >= 0) {
-		sysdev_remove_file(&per_cpu(device_mce, cpu),
-					&bank_attrs[i]);
-	}
-error:
-	while (--i >= 0) {
-		sysdev_remove_file(&per_cpu(device_mce,cpu),
-				   mce_attributes[i]);
-	}
-	sysdev_unregister(&per_cpu(device_mce,cpu));
-
-	return err;
-}
-
-static __cpuinit void mce_remove_device(unsigned int cpu)
-{
-	int i;
-
-	if (!cpumask_test_cpu(cpu, mce_device_initialized))
-		return;
-
-	for (i = 0; mce_attributes[i]; i++)
-		sysdev_remove_file(&per_cpu(device_mce,cpu),
-			mce_attributes[i]);
-	for (i = 0; i < banks; i++)
-		sysdev_remove_file(&per_cpu(device_mce, cpu),
-			&bank_attrs[i]);
-	sysdev_unregister(&per_cpu(device_mce,cpu));
-	cpumask_clear_cpu(cpu, mce_device_initialized);
-}
-
-/* Make sure there are no machine checks on offlined CPUs. */
-static void mce_disable_cpu(void *h)
-{
-	int i;
-	unsigned long action = *(unsigned long *)h;
-
-	if (!mce_available(&current_cpu_data))
-		return;
-	if (!(action & CPU_TASKS_FROZEN))
-		cmci_clear();
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
-}
-
-static void mce_reenable_cpu(void *h)
-{
-	int i;
-	unsigned long action = *(unsigned long *)h;
-
-	if (!mce_available(&current_cpu_data))
-		return;
-	if (!(action & CPU_TASKS_FROZEN))
-		cmci_reenable();
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
-}
-
-/* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
-				      unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct timer_list *t = &per_cpu(mce_timer, cpu);
-
-	switch (action) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		mce_create_device(cpu);
-		if (threshold_cpu_callback)
-			threshold_cpu_callback(action, cpu);
-		break;
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		if (threshold_cpu_callback)
-			threshold_cpu_callback(action, cpu);
-		mce_remove_device(cpu);
-		break;
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-		del_timer_sync(t);
-		smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
-		break;
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies(jiffies +
-						__get_cpu_var(next_interval));
-		add_timer_on(t, cpu);
-		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
-		break;
-	case CPU_POST_DEAD:
-		/* intentionally ignoring frozen here */
-		cmci_rediscover(cpu);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mce_cpu_notifier __cpuinitdata = {
-	.notifier_call = mce_cpu_callback,
-};
-
-static __init int mce_init_banks(void)
-{
-	int i;
-
-	bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
-				GFP_KERNEL);
-	if (!bank_attrs)
-		return -ENOMEM;
-
-	for (i = 0; i < banks; i++) {
-		struct sysdev_attribute *a = &bank_attrs[i];
-		a->attr.name = kasprintf(GFP_KERNEL, "bank%d", i);
-		if (!a->attr.name)
-			goto nomem;
-		a->attr.mode = 0644;
-		a->show = show_bank;
-		a->store = set_bank;
-	}
-	return 0;
-
-nomem:
-	while (--i >= 0)
-		kfree(bank_attrs[i].attr.name);
-	kfree(bank_attrs);
-	bank_attrs = NULL;
-	return -ENOMEM;
-}
-
-static __init int mce_init_device(void)
-{
-	int err;
-	int i = 0;
-
-	if (!mce_available(&boot_cpu_data))
-		return -EIO;
-
-	alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
-
-	err = mce_init_banks();
-	if (err)
-		return err;
-
-	err = sysdev_class_register(&mce_sysclass);
-	if (err)
-		return err;
-
-	for_each_online_cpu(i) {
-		err = mce_create_device(i);
-		if (err)
-			return err;
-	}
-
-	register_hotcpu_notifier(&mce_cpu_notifier);
-	misc_register(&mce_log_device);
-	return err;
-}
-
-device_initcall(mce_init_device);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 56dde9c4bc9..ddae21620bd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -13,22 +13,22 @@
  *
  *  All MC4_MISCi registers are shared between multi-cores
  */
-
-#include <linux/cpu.h>
-#include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/kobject.h>
 #include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
+#include <linux/kobject.h>
+#include <linux/percpu.h>
 #include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/sysfs.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+
 #include <asm/apic.h>
+#include <asm/idle.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
-#include <asm/percpu.h>
-#include <asm/idle.h>
 
 #define PFX               "mce_threshold: "
 #define VERSION           "version 1.1.1"
@@ -48,26 +48,26 @@
 #define MCG_XBLK_ADDR     0xC0000400
 
 struct threshold_block {
-	unsigned int block;
-	unsigned int bank;
-	unsigned int cpu;
-	u32 address;
-	u16 interrupt_enable;
-	u16 threshold_limit;
-	struct kobject kobj;
-	struct list_head miscj;
+	unsigned int		block;
+	unsigned int		bank;
+	unsigned int		cpu;
+	u32			address;
+	u16			interrupt_enable;
+	u16			threshold_limit;
+	struct kobject		kobj;
+	struct list_head	miscj;
 };
 
 /* defaults used early on boot */
 static struct threshold_block threshold_defaults = {
-	.interrupt_enable = 0,
-	.threshold_limit = THRESHOLD_MAX,
+	.interrupt_enable	= 0,
+	.threshold_limit	= THRESHOLD_MAX,
 };
 
 struct threshold_bank {
-	struct kobject *kobj;
-	struct threshold_block *blocks;
-	cpumask_var_t cpus;
+	struct kobject		*kobj;
+	struct threshold_block	*blocks;
+	cpumask_var_t		cpus;
 };
 static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
 
@@ -86,9 +86,9 @@ static void amd_threshold_interrupt(void);
  */
 
 struct thresh_restart {
-	struct threshold_block *b;
-	int reset;
-	u16 old_limit;
+	struct threshold_block	*b;
+	int			reset;
+	u16			old_limit;
 };
 
 /* must be called with correct cpu affinity */
@@ -110,6 +110,7 @@ static void threshold_restart_bank(void *_tr)
 	} else if (tr->old_limit) {	/* change limit w/o reset */
 		int new_count = (mci_misc_hi & THRESHOLD_MAX) +
 		    (tr->old_limit - tr->b->threshold_limit);
+
 		mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) |
 		    (new_count & THRESHOLD_MAX);
 	}
@@ -125,11 +126,11 @@ static void threshold_restart_bank(void *_tr)
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
-	unsigned int bank, block;
 	unsigned int cpu = smp_processor_id();
-	u8 lvt_off;
 	u32 low = 0, high = 0, address = 0;
+	unsigned int bank, block;
 	struct thresh_restart tr;
+	u8 lvt_off;
 
 	for (bank = 0; bank < NR_BANKS; ++bank) {
 		for (block = 0; block < NR_BLOCKS; ++block) {
@@ -140,8 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 				if (!address)
 					break;
 				address += MCG_XBLK_ADDR;
-			}
-			else
+			} else
 				++address;
 
 			if (rdmsr_safe(address, &low, &high))
@@ -193,9 +193,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
  */
 static void amd_threshold_interrupt(void)
 {
+	u32 low = 0, high = 0, address = 0;
 	unsigned int bank, block;
 	struct mce m;
-	u32 low = 0, high = 0, address = 0;
 
 	mce_setup(&m);
 
@@ -204,16 +204,16 @@ static void amd_threshold_interrupt(void)
 		if (!(per_cpu(bank_map, m.cpu) & (1 << bank)))
 			continue;
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			if (block == 0)
+			if (block == 0) {
 				address = MSR_IA32_MC0_MISC + bank * 4;
-			else if (block == 1) {
+			} else if (block == 1) {
 				address = (low & MASK_BLKPTR_LO) >> 21;
 				if (!address)
 					break;
 				address += MCG_XBLK_ADDR;
-			}
-			else
+			} else {
 				++address;
+			}
 
 			if (rdmsr_safe(address, &low, &high))
 				break;
@@ -229,8 +229,10 @@ static void amd_threshold_interrupt(void)
 			     (high & MASK_LOCKED_HI))
 				continue;
 
-			/* Log the machine check that caused the threshold
-			   event. */
+			/*
+			 * Log the machine check that caused the threshold
+			 * event.
+			 */
 			machine_check_poll(MCP_TIMESTAMP,
 					&__get_cpu_var(mce_poll_banks));
 
@@ -254,48 +256,52 @@ static void amd_threshold_interrupt(void)
 
 struct threshold_attr {
 	struct attribute attr;
-	ssize_t(*show) (struct threshold_block *, char *);
-	ssize_t(*store) (struct threshold_block *, const char *, size_t count);
+	ssize_t (*show) (struct threshold_block *, char *);
+	ssize_t (*store) (struct threshold_block *, const char *, size_t count);
 };
 
-#define SHOW_FIELDS(name)                                           \
-static ssize_t show_ ## name(struct threshold_block * b, char *buf) \
-{                                                                   \
-        return sprintf(buf, "%lx\n", (unsigned long) b->name);      \
+#define SHOW_FIELDS(name)						\
+static ssize_t show_ ## name(struct threshold_block *b, char *buf)	\
+{									\
+	return sprintf(buf, "%lx\n", (unsigned long) b->name);		\
 }
 SHOW_FIELDS(interrupt_enable)
 SHOW_FIELDS(threshold_limit)
 
-static ssize_t store_interrupt_enable(struct threshold_block *b,
-				      const char *buf, size_t count)
+static ssize_t
+store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 {
-	char *end;
 	struct thresh_restart tr;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
+	unsigned long new;
+
+	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
+
 	b->interrupt_enable = !!new;
 
-	tr.b = b;
-	tr.reset = 0;
-	tr.old_limit = 0;
+	tr.b		= b;
+	tr.reset	= 0;
+	tr.old_limit	= 0;
+
 	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
 
-	return end - buf;
+	return size;
 }
 
-static ssize_t store_threshold_limit(struct threshold_block *b,
-				     const char *buf, size_t count)
+static ssize_t
+store_threshold_limit(struct threshold_block *b, const char *buf, size_t size)
 {
-	char *end;
 	struct thresh_restart tr;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
+	unsigned long new;
+
+	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
+
 	if (new > THRESHOLD_MAX)
 		new = THRESHOLD_MAX;
 	if (new < 1)
 		new = 1;
+
 	tr.old_limit = b->threshold_limit;
 	b->threshold_limit = new;
 	tr.b = b;
@@ -303,12 +309,12 @@ static ssize_t store_threshold_limit(struct threshold_block *b,
 
 	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
 
-	return end - buf;
+	return size;
 }
 
 struct threshold_block_cross_cpu {
-	struct threshold_block *tb;
-	long retval;
+	struct threshold_block	*tb;
+	long			retval;
 };
 
 static void local_error_count_handler(void *_tbcc)
@@ -338,16 +344,13 @@ static ssize_t store_error_count(struct threshold_block *b,
 	return 1;
 }
 
-#define THRESHOLD_ATTR(_name,_mode,_show,_store) {            \
-        .attr = {.name = __stringify(_name), .mode = _mode }, \
-        .show = _show,                                        \
-        .store = _store,                                      \
+#define RW_ATTR(val)							\
+static struct threshold_attr val = {					\
+	.attr	= {.name = __stringify(val), .mode = 0644 },		\
+	.show	= show_## val,						\
+	.store	= store_## val,						\
 };
 
-#define RW_ATTR(name)                                           \
-static struct threshold_attr name =                             \
-        THRESHOLD_ATTR(name, 0644, show_## name, store_## name)
-
 RW_ATTR(interrupt_enable);
 RW_ATTR(threshold_limit);
 RW_ATTR(error_count);
@@ -359,15 +362,17 @@ static struct attribute *default_attrs[] = {
 	NULL
 };
 
-#define to_block(k) container_of(k, struct threshold_block, kobj)
-#define to_attr(a) container_of(a, struct threshold_attr, attr)
+#define to_block(k)	container_of(k, struct threshold_block, kobj)
+#define to_attr(a)	container_of(a, struct threshold_attr, attr)
 
 static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
 {
 	struct threshold_block *b = to_block(kobj);
 	struct threshold_attr *a = to_attr(attr);
 	ssize_t ret;
+
 	ret = a->show ? a->show(b, buf) : -EIO;
+
 	return ret;
 }
 
@@ -377,18 +382,20 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	struct threshold_block *b = to_block(kobj);
 	struct threshold_attr *a = to_attr(attr);
 	ssize_t ret;
+
 	ret = a->store ? a->store(b, buf, count) : -EIO;
+
 	return ret;
 }
 
 static struct sysfs_ops threshold_ops = {
-	.show = show,
-	.store = store,
+	.show			= show,
+	.store			= store,
 };
 
 static struct kobj_type threshold_ktype = {
-	.sysfs_ops = &threshold_ops,
-	.default_attrs = default_attrs,
+	.sysfs_ops		= &threshold_ops,
+	.default_attrs		= default_attrs,
 };
 
 static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
@@ -396,9 +403,9 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 					       unsigned int block,
 					       u32 address)
 {
-	int err;
-	u32 low, high;
 	struct threshold_block *b = NULL;
+	u32 low, high;
+	int err;
 
 	if ((bank >= NR_BANKS) || (block >= NR_BLOCKS))
 		return 0;
@@ -421,20 +428,21 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 	if (!b)
 		return -ENOMEM;
 
-	b->block = block;
-	b->bank = bank;
-	b->cpu = cpu;
-	b->address = address;
-	b->interrupt_enable = 0;
-	b->threshold_limit = THRESHOLD_MAX;
+	b->block		= block;
+	b->bank			= bank;
+	b->cpu			= cpu;
+	b->address		= address;
+	b->interrupt_enable	= 0;
+	b->threshold_limit	= THRESHOLD_MAX;
 
 	INIT_LIST_HEAD(&b->miscj);
 
-	if (per_cpu(threshold_banks, cpu)[bank]->blocks)
+	if (per_cpu(threshold_banks, cpu)[bank]->blocks) {
 		list_add(&b->miscj,
 			 &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj);
-	else
+	} else {
 		per_cpu(threshold_banks, cpu)[bank]->blocks = b;
+	}
 
 	err = kobject_init_and_add(&b->kobj, &threshold_ktype,
 				   per_cpu(threshold_banks, cpu)[bank]->kobj,
@@ -447,8 +455,9 @@ recurse:
 		if (!address)
 			return 0;
 		address += MCG_XBLK_ADDR;
-	} else
+	} else {
 		++address;
+	}
 
 	err = allocate_threshold_blocks(cpu, bank, ++block, address);
 	if (err)
@@ -500,13 +509,14 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (!b)
 			goto out;
 
-		err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj,
+		err = sysfs_create_link(&per_cpu(mce_dev, cpu).kobj,
 					b->kobj, name);
 		if (err)
 			goto out;
 
 		cpumask_copy(b->cpus, cpu_core_mask(cpu));
 		per_cpu(threshold_banks, cpu)[bank] = b;
+
 		goto out;
 	}
 #endif
@@ -522,7 +532,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		goto out;
 	}
 
-	b->kobj = kobject_create_and_add(name, &per_cpu(device_mce, cpu).kobj);
+	b->kobj = kobject_create_and_add(name, &per_cpu(mce_dev, cpu).kobj);
 	if (!b->kobj)
 		goto out_free;
 
@@ -542,7 +552,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (i == cpu)
 			continue;
 
-		err = sysfs_create_link(&per_cpu(device_mce, i).kobj,
+		err = sysfs_create_link(&per_cpu(mce_dev, i).kobj,
 					b->kobj, name);
 		if (err)
 			goto out;
@@ -605,15 +615,13 @@ static void deallocate_threshold_block(unsigned int cpu,
 
 static void threshold_remove_bank(unsigned int cpu, int bank)
 {
-	int i = 0;
 	struct threshold_bank *b;
 	char name[32];
+	int i = 0;
 
 	b = per_cpu(threshold_banks, cpu)[bank];
-
 	if (!b)
 		return;
-
 	if (!b->blocks)
 		goto free_out;
 
@@ -622,8 +630,9 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #ifdef CONFIG_SMP
 	/* sibling symlink */
 	if (shared_bank[bank] && b->blocks->cpu != cpu) {
-		sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name);
+		sysfs_remove_link(&per_cpu(mce_dev, cpu).kobj, name);
 		per_cpu(threshold_banks, cpu)[bank] = NULL;
+
 		return;
 	}
 #endif
@@ -633,7 +642,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 		if (i == cpu)
 			continue;
 
-		sysfs_remove_link(&per_cpu(device_mce, i).kobj, name);
+		sysfs_remove_link(&per_cpu(mce_dev, i).kobj, name);
 		per_cpu(threshold_banks, i)[bank] = NULL;
 	}
 
@@ -659,12 +668,9 @@ static void threshold_remove_device(unsigned int cpu)
 }
 
 /* get notified when a cpu comes on/off */
-static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
-						     unsigned int cpu)
+static void __cpuinit
+amd_64_threshold_cpu_callback(unsigned long action, unsigned int cpu)
 {
-	if (cpu >= NR_CPUS)
-		return;
-
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
@@ -686,11 +692,12 @@ static __init int threshold_init_device(void)
 	/* to hit CPUs online before the notifier is up */
 	for_each_online_cpu(lcpu) {
 		int err = threshold_create_device(lcpu);
+
 		if (err)
 			return err;
 	}
 	threshold_cpu_callback = amd_64_threshold_cpu_callback;
+
 	return 0;
 }
-
 device_initcall(threshold_init_device);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
new file mode 100644
index 00000000000..2b011d2d857
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -0,0 +1,74 @@
+/*
+ * Common code for Intel machine checks
+ */
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+	unsigned int cpu = smp_processor_id();
+	int tm2 = 0;
+	u32 l, h;
+
+	/* Thermal monitoring depends on ACPI and clock modulation*/
+	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+		return;
+
+	/*
+	 * First check if its enabled already, in which case there might
+	 * be some SMM goo which handles it, so we can't even put a handler
+	 * since it might be delivered via SMI already:
+	 */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	h = apic_read(APIC_LVTTHMR);
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+		return;
+	}
+
+	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
+		tm2 = 1;
+
+	/* Check whether a vector already exists */
+	if (h & APIC_VECTOR_MASK) {
+		printk(KERN_DEBUG
+		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
+		       cpu, (h & APIC_VECTOR_MASK));
+		return;
+	}
+
+	/* We'll mask the thermal vector in the lapic till we're ready: */
+	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+	apic_write(APIC_LVTTHMR, h);
+
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr(MSR_IA32_THERM_INTERRUPT,
+		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+	intel_set_thermal_handler();
+
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+	/* Unmask the thermal vector: */
+	l = apic_read(APIC_LVTTHMR);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+	       cpu, tm2 ? "TM2" : "TM1");
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index cef3ee30744..f2ef6952c40 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -15,7 +15,8 @@
 #include <asm/hw_irq.h>
 #include <asm/idle.h>
 #include <asm/therm_throt.h>
-#include <asm/apic.h>
+
+#include "mce.h"
 
 asmlinkage void smp_thermal_interrupt(void)
 {
@@ -27,67 +28,13 @@ asmlinkage void smp_thermal_interrupt(void)
 	irq_enter();
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & 1))
+	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
 		mce_log_therm_throt_event(msr_val);
 
 	inc_irq_stat(irq_thermal_count);
 	irq_exit();
 }
 
-static void intel_init_thermal(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int tm2 = 0;
-	unsigned int cpu = smp_processor_id();
-
-	if (!cpu_has(c, X86_FEATURE_ACPI))
-		return;
-
-	if (!cpu_has(c, X86_FEATURE_ACC))
-		return;
-
-	/* first check if TM1 is already enabled by the BIOS, in which
-	 * case there might be some SMM goo which handles it, so we can't even
-	 * put a handler since it might be delivered via SMI already.
-	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
-		return;
-	}
-
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
-		tm2 = 1;
-
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal LVT vector (%#x) already "
-		       "installed\n", cpu, (h & APIC_VECTOR_MASK));
-		return;
-	}
-
-	h = THERMAL_APIC_VECTOR;
-	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);
-	apic_write(APIC_LVTTHMR, h);
-
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
-
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
-		cpu, tm2 ? "TM2" : "TM1");
-
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
-	return;
-}
-
 /*
  * Support for Intel Correct Machine Check Interrupts. This allows
  * the CPU to raise an interrupt when a corrected machine check happened.
@@ -109,6 +56,9 @@ static int cmci_supported(int *banks)
 {
 	u64 cap;
 
+	if (mce_cmci_disabled || mce_ignore_ce)
+		return 0;
+
 	/*
 	 * Vendor check is not strictly needed, but the initial
 	 * initialization is vendor keyed and this
@@ -132,7 +82,7 @@ static int cmci_supported(int *banks)
 static void intel_threshold_interrupt(void)
 {
 	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
-	mce_notify_user();
+	mce_notify_irq();
 }
 
 static void print_update(char *type, int *hdr, int num)
@@ -248,7 +198,7 @@ void cmci_rediscover(int dying)
 		return;
 	cpumask_copy(old, &current->cpus_allowed);
 
-	for_each_online_cpu (cpu) {
+	for_each_online_cpu(cpu) {
 		if (cpu == dying)
 			continue;
 		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index a74af128efc..70b710420f7 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -6,15 +6,14 @@
  * This file contains routines to check for non-fatal MCEs every 15s
  *
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
 #include <linux/interrupt.h>
-#include <linux/smp.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -22,9 +21,9 @@
 
 #include "mce.h"
 
-static int firstbank;
+static int		firstbank;
 
-#define MCE_RATE	15*HZ	/* timer rate is 15s */
+#define MCE_RATE	(15*HZ)	/* timer rate is 15s */
 
 static void mce_checkregs(void *info)
 {
@@ -34,23 +33,24 @@ static void mce_checkregs(void *info)
 	for (i = firstbank; i < nr_mce_banks; i++) {
 		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
 
-		if (high & (1<<31)) {
-			printk(KERN_INFO "MCE: The hardware reports a non "
-				"fatal, correctable incident occurred on "
-				"CPU %d.\n",
+		if (!(high & (1<<31)))
+			continue;
+
+		printk(KERN_INFO "MCE: The hardware reports a non fatal, "
+			"correctable incident occurred on CPU %d.\n",
 				smp_processor_id());
-			printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
-
-			/*
-			 * Scrub the error so we don't pick it up in MCE_RATE
-			 * seconds time.
-			 */
-			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-
-			/* Serialize */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
+
+		printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+
+		/*
+		 * Scrub the error so we don't pick it up in MCE_RATE
+		 * seconds time:
+		 */
+		wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+		/* Serialize: */
+		wmb();
+		add_taint(TAINT_MACHINE_CHECK);
 	}
 }
 
@@ -77,16 +77,17 @@ static int __init init_nonfatal_mce_checker(void)
 
 	/* Some Athlons misbehave when we frob bank 0 */
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-		boot_cpu_data.x86 == 6)
-			firstbank = 1;
+						boot_cpu_data.x86 == 6)
+		firstbank = 1;
 	else
-			firstbank = 0;
+		firstbank = 0;
 
 	/*
 	 * Check for non-fatal errors every MCE_RATE s
 	 */
 	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
 	printk(KERN_INFO "Machine check exception polling timer started.\n");
+
 	return 0;
 }
 module_init(init_nonfatal_mce_checker);
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index f53bdcbaf38..82cee108a2d 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -2,18 +2,17 @@
  * P4 specific Machine Check Exception Reporting
  */
 
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
+#include <asm/therm_throt.h>
 #include <asm/processor.h>
 #include <asm/system.h>
-#include <asm/msr.h>
 #include <asm/apic.h>
-
-#include <asm/therm_throt.h>
+#include <asm/msr.h>
 
 #include "mce.h"
 
@@ -36,6 +35,7 @@ static int mce_num_extended_msrs;
 
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
+
 static void unexpected_thermal_interrupt(struct pt_regs *regs)
 {
 	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
@@ -43,7 +43,7 @@ static void unexpected_thermal_interrupt(struct pt_regs *regs)
 	add_taint(TAINT_MACHINE_CHECK);
 }
 
-/* P4/Xeon Thermal transition interrupt handler */
+/* P4/Xeon Thermal transition interrupt handler: */
 static void intel_thermal_interrupt(struct pt_regs *regs)
 {
 	__u64 msr_val;
@@ -51,11 +51,12 @@ static void intel_thermal_interrupt(struct pt_regs *regs)
 	ack_APIC_irq();
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	therm_throt_process(msr_val & 0x1);
+	therm_throt_process(msr_val & THERM_STATUS_PROCHOT);
 }
 
-/* Thermal interrupt handler for this CPU setup */
-static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
+/* Thermal interrupt handler for this CPU setup: */
+static void (*vendor_thermal_interrupt)(struct pt_regs *regs) =
+						unexpected_thermal_interrupt;
 
 void smp_thermal_interrupt(struct pt_regs *regs)
 {
@@ -65,67 +66,15 @@ void smp_thermal_interrupt(struct pt_regs *regs)
 	irq_exit();
 }
 
-/* P4/Xeon Thermal regulation detect and init */
-static void intel_init_thermal(struct cpuinfo_x86 *c)
+void intel_set_thermal_handler(void)
 {
-	u32 l, h;
-	unsigned int cpu = smp_processor_id();
-
-	/* Thermal monitoring */
-	if (!cpu_has(c, X86_FEATURE_ACPI))
-		return;	/* -ENODEV */
-
-	/* Clock modulation */
-	if (!cpu_has(c, X86_FEATURE_ACC))
-		return;	/* -ENODEV */
-
-	/* first check if its enabled already, in which case there might
-	 * be some SMM goo which handles it, so we can't even put a handler
-	 * since it might be delivered via SMI already -zwanem.
-	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
-				cpu);
-		return; /* -EBUSY */
-	}
-
-	/* check whether a vector already exists, temporarily masked? */
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
-				"installed\n",
-			cpu, (h & APIC_VECTOR_MASK));
-		return; /* -EBUSY */
-	}
-
-	/* The temperature transition interrupt handler setup */
-	h = THERMAL_APIC_VECTOR;		/* our delivery vector */
-	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
-	apic_write(APIC_LVTTHMR, h);
-
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
-
-	/* ok we're good to go... */
 	vendor_thermal_interrupt = intel_thermal_interrupt;
-
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
-
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
-	return;
 }
-#endif /* CONFIG_X86_MCE_P4THERMAL */
 
+#endif /* CONFIG_X86_MCE_P4THERMAL */
 
 /* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
+static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {
 	u32 h;
 
@@ -143,9 +92,9 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 
 static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
+	int recover = 1;
 	int i;
 
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -157,7 +106,9 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 
 	if (mce_num_extended_msrs > 0) {
 		struct intel_mce_extended_msrs dbg;
+
 		intel_get_extended_msrs(&dbg);
+
 		printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
 			"\teax: %08x ebx: %08x ecx: %08x edx: %08x\n"
 			"\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
@@ -171,6 +122,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 		if (high & (1<<31)) {
 			char misc[20];
 			char addr[24];
+
 			misc[0] = addr[0] = '\0';
 			if (high & (1<<29))
 				recover |= 1;
@@ -196,6 +148,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 		panic("Unable to continue");
 
 	printk(KERN_EMERG "Attempting to continue.\n");
+
 	/*
 	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
@@ -217,7 +170,6 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
-
 void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index c9f77ea69ed..015f481ab1b 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -2,11 +2,10 @@
  * P5 specific Machine Check Exception Reporting
  * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -15,39 +14,58 @@
 
 #include "mce.h"
 
-/* Machine check handler for Pentium class Intel */
+/* By default disabled */
+int		mce_p5_enable;
+
+/* Machine check handler for Pentium class Intel CPUs: */
 static void pentium_machine_check(struct pt_regs *regs, long error_code)
 {
 	u32 loaddr, hi, lotype;
+
 	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
 	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
-	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
-	if (lotype&(1<<5))
-		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+
+	printk(KERN_EMERG
+		"CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n",
+		smp_processor_id(), loaddr, lotype);
+
+	if (lotype & (1<<5)) {
+		printk(KERN_EMERG
+			"CPU#%d: Possible thermal failure (CPU on fire ?).\n",
+			smp_processor_id());
+	}
+
 	add_taint(TAINT_MACHINE_CHECK);
 }
 
-/* Set up machine check reporting for processors with Intel style MCE */
+/* Set up machine check reporting for processors with Intel style MCE: */
 void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 
-	/*Check for MCE support */
+	/* Check for MCE support: */
 	if (!cpu_has(c, X86_FEATURE_MCE))
 		return;
 
-	/* Default P5 to off as its often misconnected */
+#ifdef CONFIG_X86_OLD_MCE
+	/* Default P5 to off as its often misconnected: */
 	if (mce_disabled != -1)
 		return;
+#endif
+
 	machine_check_vector = pentium_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
 
-	/* Read registers before enabling */
+	/* Read registers before enabling: */
 	rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
 	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
-	printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+	printk(KERN_INFO
+	       "Intel old style machine check architecture supported.\n");
 
-	/* Enable MCE */
+	/* Enable MCE: */
 	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+	printk(KERN_INFO
+	       "Intel old style machine check reporting enabled on CPU#%d.\n",
+	       smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index 2ac52d7b434..43c24e66745 100644
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
@@ -2,11 +2,10 @@
  * P6 specific Machine Check Exception Reporting
  * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/smp.h>
 
 #include <asm/processor.h>
@@ -18,9 +17,9 @@
 /* Machine Check Handler For PII/PIII */
 static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
+	int recover = 1;
 	int i;
 
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -35,12 +34,16 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 		if (high & (1<<31)) {
 			char misc[20];
 			char addr[24];
-			misc[0] = addr[0] = '\0';
+
+			misc[0] = '\0';
+			addr[0] = '\0';
+
 			if (high & (1<<29))
 				recover |= 1;
 			if (high & (1<<25))
 				recover |= 2;
 			high &= ~(1<<31);
+
 			if (high & (1<<27)) {
 				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
 				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
@@ -49,6 +52,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
 				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
 			}
+
 			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
 				smp_processor_id(), i, high, low, misc, addr);
 		}
@@ -63,16 +67,17 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 	/*
 	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
-	 * for errors if the OS could not log the error.
+	 * for errors if the OS could not log the error:
 	 */
 	for (i = 0; i < nr_mce_banks; i++) {
 		unsigned int msr;
+
 		msr = MSR_IA32_MC0_STATUS+i*4;
 		rdmsr(msr, low, high);
 		if (high & (1<<31)) {
-			/* Clear it */
+			/* Clear it: */
 			wrmsr(msr, 0UL, 0UL);
-			/* Serialize */
+			/* Serialize: */
 			wmb();
 			add_taint(TAINT_MACHINE_CHECK);
 		}
@@ -81,7 +86,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
 	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
-/* Set up machine check reporting for processors with Intel style MCE */
+/* Set up machine check reporting for processors with Intel style MCE: */
 void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -97,6 +102,7 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 
 	/* Ok machine check is available */
 	machine_check_vector = intel_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
 
 	printk(KERN_INFO "Intel machine check architecture supported.\n");
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index d5ae2243f0b..7b1ae2e20ba 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -1,7 +1,7 @@
 /*
- *
  * Thermal throttle event support code (such as syslog messaging and rate
  * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ *
  * This allows consistent reporting of CPU thermal throttle events.
  *
  * Maintains a counter in /sys that keeps track of the number of thermal
@@ -13,43 +13,43 @@
  * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
  *          Inspired by Ross Biro's and Al Borchers' counter code.
  */
-
+#include <linux/notifier.h>
+#include <linux/jiffies.h>
 #include <linux/percpu.h>
 #include <linux/sysdev.h>
 #include <linux/cpu.h>
-#include <asm/cpu.h>
-#include <linux/notifier.h>
-#include <linux/jiffies.h>
+
 #include <asm/therm_throt.h>
 
 /* How long to wait between reporting thermal events */
-#define CHECK_INTERVAL              (300 * HZ)
+#define CHECK_INTERVAL		(300 * HZ)
 
 static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
 static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-atomic_t therm_throt_en = ATOMIC_INIT(0);
+
+atomic_t therm_throt_en		= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
-#define define_therm_throt_sysdev_one_ro(_name)                              \
-        static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
-
-#define define_therm_throt_sysdev_show_func(name)                            \
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
-					struct sysdev_attribute *attr,	     \
-                                              char *buf)                     \
-{                                                                            \
-	unsigned int cpu = dev->id;                                          \
-	ssize_t ret;                                                         \
-                                                                             \
-	preempt_disable();              /* CPU hotplug */                    \
-	if (cpu_online(cpu))                                                 \
-		ret = sprintf(buf, "%lu\n",                                  \
-			      per_cpu(thermal_throttle_##name, cpu));        \
-	else                                                                 \
-		ret = 0;                                                     \
-	preempt_enable();                                                    \
-                                                                             \
-	return ret;                                                          \
+#define define_therm_throt_sysdev_one_ro(_name)				\
+	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
+
+#define define_therm_throt_sysdev_show_func(name)			\
+static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
+					struct sysdev_attribute *attr,	\
+					      char *buf)		\
+{									\
+	unsigned int cpu = dev->id;					\
+	ssize_t ret;							\
+									\
+	preempt_disable();	/* CPU hotplug */			\
+	if (cpu_online(cpu))						\
+		ret = sprintf(buf, "%lu\n",				\
+			      per_cpu(thermal_throttle_##name, cpu));	\
+	else								\
+		ret = 0;						\
+	preempt_enable();						\
+									\
+	return ret;							\
 }
 
 define_therm_throt_sysdev_show_func(count);
@@ -61,8 +61,8 @@ static struct attribute *thermal_throttle_attrs[] = {
 };
 
 static struct attribute_group thermal_throttle_attr_group = {
-	.attrs = thermal_throttle_attrs,
-	.name = "thermal_throttle"
+	.attrs	= thermal_throttle_attrs,
+	.name	= "thermal_throttle"
 };
 #endif /* CONFIG_SYSFS */
 
@@ -110,10 +110,11 @@ int therm_throt_process(int curr)
 }
 
 #ifdef CONFIG_SYSFS
-/* Add/Remove thermal_throttle interface for CPU device */
+/* Add/Remove thermal_throttle interface for CPU device: */
 static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev)
 {
-	return sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+	return sysfs_create_group(&sys_dev->kobj,
+				  &thermal_throttle_attr_group);
 }
 
 static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
@@ -121,19 +122,21 @@ static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
 	sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
 }
 
-/* Mutex protecting device creation against CPU hotplug */
+/* Mutex protecting device creation against CPU hotplug: */
 static DEFINE_MUTEX(therm_cpu_lock);
 
 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb,
-						   unsigned long action,
-						   void *hcpu)
+static __cpuinit int
+thermal_throttle_cpu_callback(struct notifier_block *nfb,
+			      unsigned long action,
+			      void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
 	struct sys_device *sys_dev;
 	int err = 0;
 
 	sys_dev = get_cpu_sysdev(cpu);
+
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index 23ee9e730f7..d746df2909c 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -17,7 +17,7 @@ static void default_threshold_interrupt(void)
 
 void (*mce_threshold_vector)(void) = default_threshold_interrupt;
 
-asmlinkage void mce_threshold_interrupt(void)
+asmlinkage void smp_threshold_interrupt(void)
 {
 	exit_idle();
 	irq_enter();
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 2a043d89811..81b02487090 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -2,11 +2,10 @@
  * IDT Winchip specific Machine Check Exception Reporting
  * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -14,7 +13,7 @@
 
 #include "mce.h"
 
-/* Machine check handler for WinChip C6 */
+/* Machine check handler for WinChip C6: */
 static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {
 	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
@@ -25,12 +24,18 @@ static void winchip_machine_check(struct pt_regs *regs, long error_code)
 void winchip_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 lo, hi;
+
 	machine_check_vector = winchip_machine_check;
+	/* Make sure the vector pointer is visible before we enable MCEs: */
 	wmb();
+
 	rdmsr(MSR_IDT_FCR1, lo, hi);
 	lo |= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
 	lo &= ~(1<<4);	/* Enable MCE */
 	wrmsr(MSR_IDT_FCR1, lo, hi);
+
 	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+
+	printk(KERN_INFO
+	       "Winchip machine check reporting enabled on CPU#0.\n");
 }
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index ce0fe4b5c04..1d584a18a50 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -808,7 +808,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 
 	if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
 		return 0;
-	rdmsr(MTRRdefType_MSR, def, dummy);
+	rdmsr(MSR_MTRRdefType, def, dummy);
 	def &= 0xff;
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
@@ -1003,7 +1003,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	 */
 	if (!is_cpu(INTEL) || disable_mtrr_trim)
 		return 0;
-	rdmsr(MTRRdefType_MSR, def, dummy);
+	rdmsr(MSR_MTRRdefType, def, dummy);
 	def &= 0xff;
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 0b776c09aff..0543f69f0b2 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -20,9 +20,9 @@ struct fixed_range_block {
 };
 
 static struct fixed_range_block fixed_range_blocks[] = {
-	{ MTRRfix64K_00000_MSR, 1 }, /* one  64k MTRR  */
-	{ MTRRfix16K_80000_MSR, 2 }, /* two  16k MTRRs */
-	{ MTRRfix4K_C0000_MSR,  8 }, /* eight 4k MTRRs */
+	{ MSR_MTRRfix64K_00000, 1 }, /* one  64k MTRR  */
+	{ MSR_MTRRfix16K_80000, 2 }, /* two  16k MTRRs */
+	{ MSR_MTRRfix4K_C0000,  8 }, /* eight 4k MTRRs */
 	{}
 };
 
@@ -194,12 +194,12 @@ get_fixed_ranges(mtrr_type * frs)
 
 	k8_check_syscfg_dram_mod_en();
 
-	rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+	rdmsr(MSR_MTRRfix64K_00000, p[0], p[1]);
 
 	for (i = 0; i < 2; i++)
-		rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
+		rdmsr(MSR_MTRRfix16K_80000 + i, p[2 + i * 2], p[3 + i * 2]);
 	for (i = 0; i < 8; i++)
-		rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
+		rdmsr(MSR_MTRRfix4K_C0000 + i, p[6 + i * 2], p[7 + i * 2]);
 }
 
 void mtrr_save_fixed_ranges(void *info)
@@ -275,7 +275,11 @@ static void __init print_mtrr_state(void)
 	}
 	printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
 	       mtrr_state.enabled & 2 ? "en" : "dis");
-	high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4;
+	if (size_or_mask & 0xffffffffUL)
+		high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
+	else
+		high_width = ffs(size_or_mask>>32) + 32 - 1;
+	high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
 	for (i = 0; i < num_var_ranges; ++i) {
 		if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
 			printk(KERN_DEBUG "  %u base %0*X%05X000 mask %0*X%05X000 %s\n",
@@ -306,7 +310,7 @@ void __init get_mtrr_state(void)
 
 	vrs = mtrr_state.var_ranges;
 
-	rdmsr(MTRRcap_MSR, lo, dummy);
+	rdmsr(MSR_MTRRcap, lo, dummy);
 	mtrr_state.have_fixed = (lo >> 8) & 1;
 
 	for (i = 0; i < num_var_ranges; i++)
@@ -314,7 +318,7 @@ void __init get_mtrr_state(void)
 	if (mtrr_state.have_fixed)
 		get_fixed_ranges(mtrr_state.fixed_ranges);
 
-	rdmsr(MTRRdefType_MSR, lo, dummy);
+	rdmsr(MSR_MTRRdefType, lo, dummy);
 	mtrr_state.def_type = (lo & 0xff);
 	mtrr_state.enabled = (lo & 0xc00) >> 10;
 
@@ -579,10 +583,10 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 	__flush_tlb();
 
 	/*  Save MTRR state */
-	rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+	rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
 
 	/*  Disable MTRRs, and set the default type to uncached  */
-	mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & ~0xcff, deftype_hi);
+	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
 }
 
 static void post_set(void) __releases(set_atomicity_lock)
@@ -591,7 +595,7 @@ static void post_set(void) __releases(set_atomicity_lock)
 	__flush_tlb();
 
 	/* Intel (P6) standard MTRRs */
-	mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
 		
 	/*  Enable caches  */
 	write_cr0(read_cr0() & 0xbfffffff);
@@ -703,7 +707,7 @@ int generic_validate_add_page(unsigned long base, unsigned long size, unsigned i
 static int generic_have_wrcomb(void)
 {
 	unsigned long config, dummy;
-	rdmsr(MTRRcap_MSR, config, dummy);
+	rdmsr(MSR_MTRRcap, config, dummy);
 	return (config & (1 << 10));
 }
 
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 03cda01f57c..8fc248b5aea 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -104,7 +104,7 @@ static void __init set_num_var_ranges(void)
 	unsigned long config = 0, dummy;
 
 	if (use_intel()) {
-		rdmsr(MTRRcap_MSR, config, dummy);
+		rdmsr(MSR_MTRRcap, config, dummy);
 	} else if (is_cpu(AMD))
 		config = 2;
 	else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 77f67f7b347..7538b767f20 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -5,21 +5,6 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 
-#define MTRRcap_MSR     0x0fe
-#define MTRRdefType_MSR 0x2ff
-
-#define MTRRfix64K_00000_MSR 0x250
-#define MTRRfix16K_80000_MSR 0x258
-#define MTRRfix16K_A0000_MSR 0x259
-#define MTRRfix4K_C0000_MSR 0x268
-#define MTRRfix4K_C8000_MSR 0x269
-#define MTRRfix4K_D0000_MSR 0x26a
-#define MTRRfix4K_D8000_MSR 0x26b
-#define MTRRfix4K_E0000_MSR 0x26c
-#define MTRRfix4K_E8000_MSR 0x26d
-#define MTRRfix4K_F0000_MSR 0x26e
-#define MTRRfix4K_F8000_MSR 0x26f
-
 #define MTRR_CHANGE_MASK_FIXED     0x01
 #define MTRR_CHANGE_MASK_VARIABLE  0x02
 #define MTRR_CHANGE_MASK_DEFTYPE   0x04
diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
index 7f7e2753685..1f5fb1588d1 100644
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -35,7 +35,7 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 
 		if (use_intel())
 			/*  Save MTRR state */
-			rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+			rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
 		else
 			/* Cyrix ARRs - everything else were excluded at the top */
 			ctxt->ccr3 = getCx86(CX86_CCR3);
@@ -46,7 +46,7 @@ void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
 {
 	if (use_intel())
 		/*  Disable MTRRs, and set the default type to uncached  */
-		mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
+		mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL,
 		      ctxt->deftype_hi);
 	else if (is_cpu(CYRIX))
 		/* Cyrix ARRs - everything else were excluded at the top */
@@ -64,7 +64,7 @@ void set_mtrr_done(struct set_mtrr_context *ctxt)
 		/*  Restore MTRRdefType  */
 		if (use_intel())
 			/* Intel (P6) standard MTRRs */
-			mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+			mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
 		else
 			/* Cyrix ARRs - everything else was excluded at the top */
 			setCx86(CX86_CCR3, ctxt->ccr3);
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
new file mode 100644
index 00000000000..275bc142cd5
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -0,0 +1,1711 @@
+/*
+ * Performance counter x86 architecture code
+ *
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+
+#include <linux/perf_counter.h>
+#include <linux/capability.h>
+#include <linux/notifier.h>
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+#include <asm/apic.h>
+#include <asm/stacktrace.h>
+#include <asm/nmi.h>
+
+static u64 perf_counter_mask __read_mostly;
+
+struct cpu_hw_counters {
+	struct perf_counter	*counters[X86_PMC_IDX_MAX];
+	unsigned long		used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	unsigned long		interrupts;
+	int			enabled;
+};
+
+/*
+ * struct x86_pmu - generic x86 pmu
+ */
+struct x86_pmu {
+	const char	*name;
+	int		version;
+	int		(*handle_irq)(struct pt_regs *);
+	void		(*disable_all)(void);
+	void		(*enable_all)(void);
+	void		(*enable)(struct hw_perf_counter *, int);
+	void		(*disable)(struct hw_perf_counter *, int);
+	unsigned	eventsel;
+	unsigned	perfctr;
+	u64		(*event_map)(int);
+	u64		(*raw_event)(u64);
+	int		max_events;
+	int		num_counters;
+	int		num_counters_fixed;
+	int		counter_bits;
+	u64		counter_mask;
+	u64		max_period;
+	u64		intel_ctrl;
+};
+
+static struct x86_pmu x86_pmu __read_mostly;
+
+static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = {
+	.enabled = 1,
+};
+
+/*
+ * Intel PerfMon v3. Used on Core2 and later.
+ */
+static const u64 intel_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x4f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x412e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
+};
+
+static u64 intel_pmu_event_map(int event)
+{
+	return intel_perfmon_event_map[event];
+}
+
+/*
+ * Generalized hw caching related event table, filled
+ * in on a per model basis. A value of 0 means
+ * 'not supported', -1 means 'event makes no sense on
+ * this CPU', any other value means the raw event
+ * ID.
+ */
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+static u64 __read_mostly hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX];
+
+static const u64 nehalem_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
+		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
+		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
+		[ C(RESULT_MISS)   ] = 0x024e, /* L1D_PREFETCH.MISS            */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                    */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS               */
+		[ C(RESULT_MISS)   ] = 0x0224, /* L2_RQSTS.LD_MISS             */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS                */
+		[ C(RESULT_MISS)   ] = 0x0824, /* L2_RQSTS.RFO_MISS            */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference                */
+		[ C(RESULT_MISS)   ] = 0x412e, /* LLC Misses                   */
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI   (alias)  */
+		[ C(RESULT_MISS)   ] = 0x0108, /* DTLB_LOAD_MISSES.ANY         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI   (alias)  */
+		[ C(RESULT_MISS)   ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS  */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P           */
+		[ C(RESULT_MISS)   ] = 0x20c8, /* ITLB_MISS_RETIRED            */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
+		[ C(RESULT_MISS)   ] = 0x03e8, /* BPU_CLEARS.ANY               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static const u64 core2_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI          */
+		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE       */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI          */
+		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE       */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x104e, /* L1D_PREFETCH.REQUESTS      */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* L1I.READS                  */
+		[ C(RESULT_MISS)   ] = 0x0081, /* L1I.MISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0208, /* DTLB_MISSES.MISS_LD        */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0808, /* DTLB_MISSES.MISS_ST        */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
+		[ C(RESULT_MISS)   ] = 0x1282, /* ITLBMISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static const u64 atom_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE.LD               */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE.ST               */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                  */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE_LD.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0508, /* DTLB_MISSES.MISS_LD        */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE_ST.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0608, /* DTLB_MISSES.MISS_ST        */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
+		[ C(RESULT_MISS)   ] = 0x0282, /* ITLB.MISSES                */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static u64 intel_pmu_raw_event(u64 event)
+{
+#define CORE_EVNTSEL_EVENT_MASK		0x000000FFULL
+#define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
+#define CORE_EVNTSEL_EDGE_MASK		0x00040000ULL
+#define CORE_EVNTSEL_INV_MASK		0x00800000ULL
+#define CORE_EVNTSEL_COUNTER_MASK	0xFF000000ULL
+
+#define CORE_EVNTSEL_MASK		\
+	(CORE_EVNTSEL_EVENT_MASK |	\
+	 CORE_EVNTSEL_UNIT_MASK  |	\
+	 CORE_EVNTSEL_EDGE_MASK  |	\
+	 CORE_EVNTSEL_INV_MASK  |	\
+	 CORE_EVNTSEL_COUNTER_MASK)
+
+	return event & CORE_EVNTSEL_MASK;
+}
+
+static const u64 amd_0f_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction cache fetches  */
+		[ C(RESULT_MISS)   ] = 0x0081, /* Instruction cache misses   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction fecthes        */
+		[ C(RESULT_MISS)   ] = 0x0085, /* Instr. fetch ITLB misses   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c2, /* Retired Branch Instr.      */
+		[ C(RESULT_MISS)   ] = 0x00c3, /* Retired Mispredicted BI    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+/*
+ * AMD Performance Monitor K7 and later.
+ */
+static const u64 amd_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0076,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+};
+
+static u64 amd_pmu_event_map(int event)
+{
+	return amd_perfmon_event_map[event];
+}
+
+static u64 amd_pmu_raw_event(u64 event)
+{
+#define K7_EVNTSEL_EVENT_MASK	0x7000000FFULL
+#define K7_EVNTSEL_UNIT_MASK	0x00000FF00ULL
+#define K7_EVNTSEL_EDGE_MASK	0x000040000ULL
+#define K7_EVNTSEL_INV_MASK	0x000800000ULL
+#define K7_EVNTSEL_COUNTER_MASK	0x0FF000000ULL
+
+#define K7_EVNTSEL_MASK			\
+	(K7_EVNTSEL_EVENT_MASK |	\
+	 K7_EVNTSEL_UNIT_MASK  |	\
+	 K7_EVNTSEL_EDGE_MASK  |	\
+	 K7_EVNTSEL_INV_MASK   |	\
+	 K7_EVNTSEL_COUNTER_MASK)
+
+	return event & K7_EVNTSEL_MASK;
+}
+
+/*
+ * Propagate counter elapsed time into the generic counter.
+ * Can only be executed on the CPU where the counter is active.
+ * Returns the delta events processed.
+ */
+static u64
+x86_perf_counter_update(struct perf_counter *counter,
+			struct hw_perf_counter *hwc, int idx)
+{
+	int shift = 64 - x86_pmu.counter_bits;
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+	/*
+	 * Careful: an NMI might modify the previous counter value.
+	 *
+	 * Our tactic to handle this is to first atomically read and
+	 * exchange a new raw count - then add that new-prev delta
+	 * count to the generic counter atomically:
+	 */
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	rdmsrl(hwc->counter_base + idx, new_raw_count);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+					new_raw_count) != prev_raw_count)
+		goto again;
+
+	/*
+	 * Now we have the new raw value and have updated the prev
+	 * timestamp already. We can now calculate the elapsed delta
+	 * (counter-)time and add that to the generic counter.
+	 *
+	 * Careful, not all hw sign-extends above the physical width
+	 * of the count.
+	 */
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &counter->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static atomic_t active_counters;
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+static bool reserve_pmc_hardware(void)
+{
+	int i;
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		disable_lapic_nmi_watchdog();
+
+	for (i = 0; i < x86_pmu.num_counters; i++) {
+		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
+			goto perfctr_fail;
+	}
+
+	for (i = 0; i < x86_pmu.num_counters; i++) {
+		if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
+			goto eventsel_fail;
+	}
+
+	return true;
+
+eventsel_fail:
+	for (i--; i >= 0; i--)
+		release_evntsel_nmi(x86_pmu.eventsel + i);
+
+	i = x86_pmu.num_counters;
+
+perfctr_fail:
+	for (i--; i >= 0; i--)
+		release_perfctr_nmi(x86_pmu.perfctr + i);
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		enable_lapic_nmi_watchdog();
+
+	return false;
+}
+
+static void release_pmc_hardware(void)
+{
+	int i;
+
+	for (i = 0; i < x86_pmu.num_counters; i++) {
+		release_perfctr_nmi(x86_pmu.perfctr + i);
+		release_evntsel_nmi(x86_pmu.eventsel + i);
+	}
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		enable_lapic_nmi_watchdog();
+}
+
+static void hw_perf_counter_destroy(struct perf_counter *counter)
+{
+	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_reserve_mutex)) {
+		release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+static inline int x86_pmu_initialized(void)
+{
+	return x86_pmu.handle_irq != NULL;
+}
+
+static inline int
+set_ext_hw_attr(struct hw_perf_counter *hwc, struct perf_counter_attr *attr)
+{
+	unsigned int cache_type, cache_op, cache_result;
+	u64 config, val;
+
+	config = attr->config;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	val = hw_cache_event_ids[cache_type][cache_op][cache_result];
+
+	if (val == 0)
+		return -ENOENT;
+
+	if (val == -1)
+		return -EINVAL;
+
+	hwc->config |= val;
+
+	return 0;
+}
+
+/*
+ * Setup the hardware configuration for a given attr_type
+ */
+static int __hw_perf_counter_init(struct perf_counter *counter)
+{
+	struct perf_counter_attr *attr = &counter->attr;
+	struct hw_perf_counter *hwc = &counter->hw;
+	int err;
+
+	if (!x86_pmu_initialized())
+		return -ENODEV;
+
+	err = 0;
+	if (!atomic_inc_not_zero(&active_counters)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&active_counters) == 0 && !reserve_pmc_hardware())
+			err = -EBUSY;
+		else
+			atomic_inc(&active_counters);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+	if (err)
+		return err;
+
+	/*
+	 * Generate PMC IRQs:
+	 * (keep 'enabled' bit clear for now)
+	 */
+	hwc->config = ARCH_PERFMON_EVENTSEL_INT;
+
+	/*
+	 * Count user and OS events unless requested not to.
+	 */
+	if (!attr->exclude_user)
+		hwc->config |= ARCH_PERFMON_EVENTSEL_USR;
+	if (!attr->exclude_kernel)
+		hwc->config |= ARCH_PERFMON_EVENTSEL_OS;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = x86_pmu.max_period;
+		hwc->last_period = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	counter->destroy = hw_perf_counter_destroy;
+
+	/*
+	 * Raw event type provide the config in the event structure
+	 */
+	if (attr->type == PERF_TYPE_RAW) {
+		hwc->config |= x86_pmu.raw_event(attr->config);
+		return 0;
+	}
+
+	if (attr->type == PERF_TYPE_HW_CACHE)
+		return set_ext_hw_attr(hwc, attr);
+
+	if (attr->config >= x86_pmu.max_events)
+		return -EINVAL;
+	/*
+	 * The generic map:
+	 */
+	hwc->config |= x86_pmu.event_map(attr->config);
+
+	return 0;
+}
+
+static void intel_pmu_disable_all(void)
+{
+	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+}
+
+static void amd_pmu_disable_all(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	int idx;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	/*
+	 * ensure we write the disable before we start disabling the
+	 * counters proper, so that amd_pmu_enable_counter() does the
+	 * right thing.
+	 */
+	barrier();
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
+		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
+			continue;
+		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
+	}
+}
+
+void hw_perf_disable(void)
+{
+	if (!x86_pmu_initialized())
+		return;
+	return x86_pmu.disable_all();
+}
+
+static void intel_pmu_enable_all(void)
+{
+	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+}
+
+static void amd_pmu_enable_all(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	int idx;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
+		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+			continue;
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
+	}
+}
+
+void hw_perf_enable(void)
+{
+	if (!x86_pmu_initialized())
+		return;
+	x86_pmu.enable_all();
+}
+
+static inline u64 intel_pmu_get_status(void)
+{
+	u64 status;
+
+	rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+
+	return status;
+}
+
+static inline void intel_pmu_ack_status(u64 ack)
+{
+	wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack);
+}
+
+static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	int err;
+	err = checking_wrmsrl(hwc->config_base + idx,
+			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
+}
+
+static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	int err;
+	err = checking_wrmsrl(hwc->config_base + idx,
+			      hwc->config);
+}
+
+static inline void
+intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx)
+{
+	int idx = __idx - X86_PMC_IDX_FIXED;
+	u64 ctrl_val, mask;
+	int err;
+
+	mask = 0xfULL << (idx * 4);
+
+	rdmsrl(hwc->config_base, ctrl_val);
+	ctrl_val &= ~mask;
+	err = checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+intel_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+		intel_pmu_disable_fixed(hwc, idx);
+		return;
+	}
+
+	x86_pmu_disable_counter(hwc, idx);
+}
+
+static inline void
+amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	x86_pmu_disable_counter(hwc, idx);
+}
+
+static DEFINE_PER_CPU(u64, prev_left[X86_PMC_IDX_MAX]);
+
+/*
+ * Set the next IRQ period, based on the hwc->period_left value.
+ * To be called with the counter disabled in hw:
+ */
+static int
+x86_perf_counter_set_period(struct perf_counter *counter,
+			     struct hw_perf_counter *hwc, int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int err, ret = 0;
+
+	/*
+	 * If we are way outside a reasoable range then just skip forward:
+	 */
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+	/*
+	 * Quirk: certain CPUs dont like it if just 1 event is left:
+	 */
+	if (unlikely(left < 2))
+		left = 2;
+
+	if (left > x86_pmu.max_period)
+		left = x86_pmu.max_period;
+
+	per_cpu(prev_left[idx], smp_processor_id()) = left;
+
+	/*
+	 * The hw counter starts counting from this counter offset,
+	 * mark it to be able to extra future deltas:
+	 */
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	err = checking_wrmsrl(hwc->counter_base + idx,
+			     (u64)(-left) & x86_pmu.counter_mask);
+
+	return ret;
+}
+
+static inline void
+intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx)
+{
+	int idx = __idx - X86_PMC_IDX_FIXED;
+	u64 ctrl_val, bits, mask;
+	int err;
+
+	/*
+	 * Enable IRQ generation (0x8),
+	 * and enable ring-3 counting (0x2) and ring-0 counting (0x1)
+	 * if requested:
+	 */
+	bits = 0x8ULL;
+	if (hwc->config & ARCH_PERFMON_EVENTSEL_USR)
+		bits |= 0x2;
+	if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+		bits |= 0x1;
+	bits <<= (idx * 4);
+	mask = 0xfULL << (idx * 4);
+
+	rdmsrl(hwc->config_base, ctrl_val);
+	ctrl_val &= ~mask;
+	ctrl_val |= bits;
+	err = checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+		intel_pmu_enable_fixed(hwc, idx);
+		return;
+	}
+
+	x86_pmu_enable_counter(hwc, idx);
+}
+
+static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	if (cpuc->enabled)
+		x86_pmu_enable_counter(hwc, idx);
+	else
+		x86_pmu_disable_counter(hwc, idx);
+}
+
+static int
+fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
+{
+	unsigned int event;
+
+	if (!x86_pmu.num_counters_fixed)
+		return -1;
+
+	/*
+	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
+	 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+					boot_cpu_data.x86_model == 28)
+		return -1;
+
+	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
+
+	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
+		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
+	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
+		return X86_PMC_IDX_FIXED_CPU_CYCLES;
+	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_BUS_CYCLES)))
+		return X86_PMC_IDX_FIXED_BUS_CYCLES;
+
+	return -1;
+}
+
+/*
+ * Find a PMC slot for the freshly enabled / scheduled in counter:
+ */
+static int x86_pmu_enable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx;
+
+	idx = fixed_mode_idx(counter, hwc);
+	if (idx >= 0) {
+		/*
+		 * Try to get the fixed counter, if that is already taken
+		 * then try to get a generic counter:
+		 */
+		if (test_and_set_bit(idx, cpuc->used_mask))
+			goto try_generic;
+
+		hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
+		/*
+		 * We set it so that counter_base + idx in wrmsr/rdmsr maps to
+		 * MSR_ARCH_PERFMON_FIXED_CTR0 ... CTR2:
+		 */
+		hwc->counter_base =
+			MSR_ARCH_PERFMON_FIXED_CTR0 - X86_PMC_IDX_FIXED;
+		hwc->idx = idx;
+	} else {
+		idx = hwc->idx;
+		/* Try to get the previous generic counter again */
+		if (test_and_set_bit(idx, cpuc->used_mask)) {
+try_generic:
+			idx = find_first_zero_bit(cpuc->used_mask,
+						  x86_pmu.num_counters);
+			if (idx == x86_pmu.num_counters)
+				return -EAGAIN;
+
+			set_bit(idx, cpuc->used_mask);
+			hwc->idx = idx;
+		}
+		hwc->config_base  = x86_pmu.eventsel;
+		hwc->counter_base = x86_pmu.perfctr;
+	}
+
+	perf_counters_lapic_init();
+
+	x86_pmu.disable(hwc, idx);
+
+	cpuc->counters[idx] = counter;
+	set_bit(idx, cpuc->active_mask);
+
+	x86_perf_counter_set_period(counter, hwc, idx);
+	x86_pmu.enable(hwc, idx);
+
+	return 0;
+}
+
+static void x86_pmu_unthrottle(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+
+	if (WARN_ON_ONCE(hwc->idx >= X86_PMC_IDX_MAX ||
+				cpuc->counters[hwc->idx] != counter))
+		return;
+
+	x86_pmu.enable(hwc, hwc->idx);
+}
+
+void perf_counter_print_debug(void)
+{
+	u64 ctrl, status, overflow, pmc_ctrl, pmc_count, prev_left, fixed;
+	struct cpu_hw_counters *cpuc;
+	unsigned long flags;
+	int cpu, idx;
+
+	if (!x86_pmu.num_counters)
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+	cpuc = &per_cpu(cpu_hw_counters, cpu);
+
+	if (x86_pmu.version >= 2) {
+		rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, ctrl);
+		rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+		rdmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, overflow);
+		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR_CTRL, fixed);
+
+		pr_info("\n");
+		pr_info("CPU#%d: ctrl:       %016llx\n", cpu, ctrl);
+		pr_info("CPU#%d: status:     %016llx\n", cpu, status);
+		pr_info("CPU#%d: overflow:   %016llx\n", cpu, overflow);
+		pr_info("CPU#%d: fixed:      %016llx\n", cpu, fixed);
+	}
+	pr_info("CPU#%d: used:       %016llx\n", cpu, *(u64 *)cpuc->used_mask);
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl);
+		rdmsrl(x86_pmu.perfctr  + idx, pmc_count);
+
+		prev_left = per_cpu(prev_left[idx], cpu);
+
+		pr_info("CPU#%d:   gen-PMC%d ctrl:  %016llx\n",
+			cpu, idx, pmc_ctrl);
+		pr_info("CPU#%d:   gen-PMC%d count: %016llx\n",
+			cpu, idx, pmc_count);
+		pr_info("CPU#%d:   gen-PMC%d left:  %016llx\n",
+			cpu, idx, prev_left);
+	}
+	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
+		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, pmc_count);
+
+		pr_info("CPU#%d: fixed-PMC%d count: %016llx\n",
+			cpu, idx, pmc_count);
+	}
+	local_irq_restore(flags);
+}
+
+static void x86_pmu_disable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx = hwc->idx;
+
+	/*
+	 * Must be done before we disable, otherwise the nmi handler
+	 * could reenable again:
+	 */
+	clear_bit(idx, cpuc->active_mask);
+	x86_pmu.disable(hwc, idx);
+
+	/*
+	 * Make sure the cleared pointer becomes visible before we
+	 * (potentially) free the counter:
+	 */
+	barrier();
+
+	/*
+	 * Drain the remaining delta count out of a counter
+	 * that we are disabling:
+	 */
+	x86_perf_counter_update(counter, hwc, idx);
+	cpuc->counters[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+}
+
+/*
+ * Save and restart an expired counter. Called by NMI contexts,
+ * so it has to be careful about preempting normal counter ops:
+ */
+static int intel_pmu_save_and_restart(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx = hwc->idx;
+	int ret;
+
+	x86_perf_counter_update(counter, hwc, idx);
+	ret = x86_perf_counter_set_period(counter, hwc, idx);
+
+	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
+		intel_pmu_enable_counter(hwc, idx);
+
+	return ret;
+}
+
+static void intel_pmu_reset(void)
+{
+	unsigned long flags;
+	int idx;
+
+	if (!x86_pmu.num_counters)
+		return;
+
+	local_irq_save(flags);
+
+	printk("clearing PMU state on CPU#%d\n", smp_processor_id());
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		checking_wrmsrl(x86_pmu.eventsel + idx, 0ull);
+		checking_wrmsrl(x86_pmu.perfctr  + idx, 0ull);
+	}
+	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
+		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
+	}
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * This handler is triggered by the local APIC, so the APIC IRQ handling
+ * rules apply:
+ */
+static int intel_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_counters *cpuc;
+	int bit, cpu, loops;
+	u64 ack, status;
+
+	data.regs = regs;
+	data.addr = 0;
+
+	cpu = smp_processor_id();
+	cpuc = &per_cpu(cpu_hw_counters, cpu);
+
+	perf_disable();
+	status = intel_pmu_get_status();
+	if (!status) {
+		perf_enable();
+		return 0;
+	}
+
+	loops = 0;
+again:
+	if (++loops > 100) {
+		WARN_ONCE(1, "perfcounters: irq loop stuck!\n");
+		perf_counter_print_debug();
+		intel_pmu_reset();
+		perf_enable();
+		return 1;
+	}
+
+	inc_irq_stat(apic_perf_irqs);
+	ack = status;
+	for_each_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
+		struct perf_counter *counter = cpuc->counters[bit];
+
+		clear_bit(bit, (unsigned long *) &status);
+		if (!test_bit(bit, cpuc->active_mask))
+			continue;
+
+		if (!intel_pmu_save_and_restart(counter))
+			continue;
+
+		if (perf_counter_overflow(counter, 1, &data))
+			intel_pmu_disable_counter(&counter->hw, bit);
+	}
+
+	intel_pmu_ack_status(ack);
+
+	/*
+	 * Repeat if there is more work to be done:
+	 */
+	status = intel_pmu_get_status();
+	if (status)
+		goto again;
+
+	perf_enable();
+
+	return 1;
+}
+
+static int amd_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_counters *cpuc;
+	struct perf_counter *counter;
+	struct hw_perf_counter *hwc;
+	int cpu, idx, handled = 0;
+	u64 val;
+
+	data.regs = regs;
+	data.addr = 0;
+
+	cpu = smp_processor_id();
+	cpuc = &per_cpu(cpu_hw_counters, cpu);
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		counter = cpuc->counters[idx];
+		hwc = &counter->hw;
+
+		val = x86_perf_counter_update(counter, hwc, idx);
+		if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+			continue;
+
+		/*
+		 * counter overflow
+		 */
+		handled		= 1;
+		data.period	= counter->hw.last_period;
+
+		if (!x86_perf_counter_set_period(counter, hwc, idx))
+			continue;
+
+		if (perf_counter_overflow(counter, 1, &data))
+			amd_pmu_disable_counter(hwc, idx);
+	}
+
+	if (handled)
+		inc_irq_stat(apic_perf_irqs);
+
+	return handled;
+}
+
+void smp_perf_pending_interrupt(struct pt_regs *regs)
+{
+	irq_enter();
+	ack_APIC_irq();
+	inc_irq_stat(apic_pending_irqs);
+	perf_counter_do_pending();
+	irq_exit();
+}
+
+void set_perf_counter_pending(void)
+{
+	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+}
+
+void perf_counters_lapic_init(void)
+{
+	if (!x86_pmu_initialized())
+		return;
+
+	/*
+	 * Always use NMI for PMU
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+}
+
+static int __kprobes
+perf_counter_nmi_handler(struct notifier_block *self,
+			 unsigned long cmd, void *__args)
+{
+	struct die_args *args = __args;
+	struct pt_regs *regs;
+
+	if (!atomic_read(&active_counters))
+		return NOTIFY_DONE;
+
+	switch (cmd) {
+	case DIE_NMI:
+	case DIE_NMI_IPI:
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	regs = args->regs;
+
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	/*
+	 * Can't rely on the handled return value to say it was our NMI, two
+	 * counters could trigger 'simultaneously' raising two back-to-back NMIs.
+	 *
+	 * If the first NMI handles both, the latter will be empty and daze
+	 * the CPU.
+	 */
+	x86_pmu.handle_irq(regs);
+
+	return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
+	.notifier_call		= perf_counter_nmi_handler,
+	.next			= NULL,
+	.priority		= 1
+};
+
+static struct x86_pmu intel_pmu = {
+	.name			= "Intel",
+	.handle_irq		= intel_pmu_handle_irq,
+	.disable_all		= intel_pmu_disable_all,
+	.enable_all		= intel_pmu_enable_all,
+	.enable			= intel_pmu_enable_counter,
+	.disable		= intel_pmu_disable_counter,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.raw_event		= intel_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32 bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic counter period:
+	 */
+	.max_period		= (1ULL << 31) - 1,
+};
+
+static struct x86_pmu amd_pmu = {
+	.name			= "AMD",
+	.handle_irq		= amd_pmu_handle_irq,
+	.disable_all		= amd_pmu_disable_all,
+	.enable_all		= amd_pmu_enable_all,
+	.enable			= amd_pmu_enable_counter,
+	.disable		= amd_pmu_disable_counter,
+	.eventsel		= MSR_K7_EVNTSEL0,
+	.perfctr		= MSR_K7_PERFCTR0,
+	.event_map		= amd_pmu_event_map,
+	.raw_event		= amd_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
+	.num_counters		= 4,
+	.counter_bits		= 48,
+	.counter_mask		= (1ULL << 48) - 1,
+	/* use highest bit to detect overflow */
+	.max_period		= (1ULL << 47) - 1,
+};
+
+static int intel_pmu_init(void)
+{
+	union cpuid10_edx edx;
+	union cpuid10_eax eax;
+	unsigned int unused;
+	unsigned int ebx;
+	int version;
+
+	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+		return -ENODEV;
+
+	/*
+	 * Check whether the Architectural PerfMon supports
+	 * Branch Misses Retired Event or not.
+	 */
+	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
+	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
+		return -ENODEV;
+
+	version = eax.split.version_id;
+	if (version < 2)
+		return -ENODEV;
+
+	x86_pmu				= intel_pmu;
+	x86_pmu.version			= version;
+	x86_pmu.num_counters		= eax.split.num_counters;
+	x86_pmu.counter_bits		= eax.split.bit_width;
+	x86_pmu.counter_mask		= (1ULL << eax.split.bit_width) - 1;
+
+	/*
+	 * Quirk: v2 perfmon does not report fixed-purpose counters, so
+	 * assume at least 3 counters:
+	 */
+	x86_pmu.num_counters_fixed	= max((int)edx.split.num_counters_fixed, 3);
+
+	rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+
+	/*
+	 * Install the hw-cache-events table:
+	 */
+	switch (boot_cpu_data.x86_model) {
+	case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
+	case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
+	case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
+	case 29: /* six-core 45 nm xeon "Dunnington" */
+		memcpy(hw_cache_event_ids, core2_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("Core2 events, ");
+		break;
+	default:
+	case 26:
+		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("Nehalem/Corei7 events, ");
+		break;
+	case 28:
+		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("Atom events, ");
+		break;
+	}
+	return 0;
+}
+
+static int amd_pmu_init(void)
+{
+	x86_pmu = amd_pmu;
+
+	switch (boot_cpu_data.x86) {
+	case 0x0f:
+	case 0x10:
+	case 0x11:
+		memcpy(hw_cache_event_ids, amd_0f_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("AMD Family 0f/10/11 events, ");
+		break;
+	}
+	return 0;
+}
+
+void __init init_hw_perf_counters(void)
+{
+	int err;
+
+	pr_info("Performance Counters: ");
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		err = intel_pmu_init();
+		break;
+	case X86_VENDOR_AMD:
+		err = amd_pmu_init();
+		break;
+	default:
+		return;
+	}
+	if (err != 0) {
+		pr_cont("no PMU driver, software counters only.\n");
+		return;
+	}
+
+	pr_cont("%s PMU driver.\n", x86_pmu.name);
+
+	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
+		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
+		WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
+		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+	}
+	perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
+	perf_max_counters = x86_pmu.num_counters;
+
+	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
+		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
+		WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
+		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+	}
+
+	perf_counter_mask |=
+		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+
+	perf_counters_lapic_init();
+	register_die_notifier(&perf_counter_nmi_notifier);
+
+	pr_info("... version:                 %d\n",     x86_pmu.version);
+	pr_info("... bit width:               %d\n",     x86_pmu.counter_bits);
+	pr_info("... generic counters:        %d\n",     x86_pmu.num_counters);
+	pr_info("... value mask:              %016Lx\n", x86_pmu.counter_mask);
+	pr_info("... max period:              %016Lx\n", x86_pmu.max_period);
+	pr_info("... fixed-purpose counters:  %d\n",     x86_pmu.num_counters_fixed);
+	pr_info("... counter mask:            %016Lx\n", perf_counter_mask);
+}
+
+static inline void x86_pmu_read(struct perf_counter *counter)
+{
+	x86_perf_counter_update(counter, &counter->hw, counter->hw.idx);
+}
+
+static const struct pmu pmu = {
+	.enable		= x86_pmu_enable,
+	.disable	= x86_pmu_disable,
+	.read		= x86_pmu_read,
+	.unthrottle	= x86_pmu_unthrottle,
+};
+
+const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
+{
+	int err;
+
+	err = __hw_perf_counter_init(counter);
+	if (err)
+		return ERR_PTR(err);
+
+	return &pmu;
+}
+
+/*
+ * callchain support
+ */
+
+static inline
+void callchain_store(struct perf_callchain_entry *entry, unsigned long ip)
+{
+	if (entry->nr < MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
+static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+
+
+static void
+backtrace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	/* Ignore warnings */
+}
+
+static void backtrace_warning(void *data, char *msg)
+{
+	/* Ignore warnings */
+}
+
+static int backtrace_stack(void *data, char *name)
+{
+	/* Don't bother with IRQ stacks for now */
+	return -1;
+}
+
+static void backtrace_address(void *data, unsigned long addr, int reliable)
+{
+	struct perf_callchain_entry *entry = data;
+
+	if (reliable)
+		callchain_store(entry, addr);
+}
+
+static const struct stacktrace_ops backtrace_ops = {
+	.warning		= backtrace_warning,
+	.warning_symbol		= backtrace_warning_symbol,
+	.stack			= backtrace_stack,
+	.address		= backtrace_address,
+};
+
+static void
+perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	unsigned long bp;
+	char *stack;
+	int nr = entry->nr;
+
+	callchain_store(entry, instruction_pointer(regs));
+
+	stack = ((char *)regs + sizeof(struct pt_regs));
+#ifdef CONFIG_FRAME_POINTER
+	bp = frame_pointer(regs);
+#else
+	bp = 0;
+#endif
+
+	dump_trace(NULL, regs, (void *)stack, bp, &backtrace_ops, entry);
+
+	entry->kernel = entry->nr - nr;
+}
+
+
+struct stack_frame {
+	const void __user	*next_fp;
+	unsigned long		return_address;
+};
+
+static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
+{
+	int ret;
+
+	if (!access_ok(VERIFY_READ, fp, sizeof(*frame)))
+		return 0;
+
+	ret = 1;
+	pagefault_disable();
+	if (__copy_from_user_inatomic(frame, fp, sizeof(*frame)))
+		ret = 0;
+	pagefault_enable();
+
+	return ret;
+}
+
+static void
+perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	struct stack_frame frame;
+	const void __user *fp;
+	int nr = entry->nr;
+
+	regs = (struct pt_regs *)current->thread.sp0 - 1;
+	fp   = (void __user *)regs->bp;
+
+	callchain_store(entry, regs->ip);
+
+	while (entry->nr < MAX_STACK_DEPTH) {
+		frame.next_fp	     = NULL;
+		frame.return_address = 0;
+
+		if (!copy_stack_frame(fp, &frame))
+			break;
+
+		if ((unsigned long)fp < user_stack_pointer(regs))
+			break;
+
+		callchain_store(entry, frame.return_address);
+		fp = frame.next_fp;
+	}
+
+	entry->user = entry->nr - nr;
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	int is_user;
+
+	if (!regs)
+		return;
+
+	is_user = user_mode(regs);
+
+	if (!current || current->pid == 0)
+		return;
+
+	if (is_user && current->state != TASK_RUNNING)
+		return;
+
+	if (!is_user)
+		perf_callchain_kernel(regs, entry);
+
+	if (current->mm)
+		perf_callchain_user(regs, entry);
+}
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry;
+
+	if (in_nmi())
+		entry = &__get_cpu_var(nmi_entry);
+	else
+		entry = &__get_cpu_var(irq_entry);
+
+	entry->nr = 0;
+	entry->hv = 0;
+	entry->kernel = 0;
+	entry->user = 0;
+
+	perf_do_callchain(regs, entry);
+
+	return entry;
+}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index f6c70a164e3..d6f5b9fbde3 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -19,8 +19,8 @@
 #include <linux/nmi.h>
 #include <linux/kprobes.h>
 
-#include <asm/genapic.h>
-#include <asm/intel_arch_perfmon.h>
+#include <asm/apic.h>
+#include <asm/perf_counter.h>
 
 struct nmi_watchdog_ctlblk {
 	unsigned int cccr_msr;
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 87b67e3a765..48bfe138603 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -19,45 +19,61 @@
  * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
  */
 
-
-#include <asm/ds.h>
-
-#include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/slab.h>
+#include <linux/errno.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/mm.h>
-#include <linux/kernel.h>
+#include <linux/trace_clock.h>
+
+#include <asm/ds.h>
 
+#include "ds_selftest.h"
 
 /*
- * The configuration for a particular DS hardware implementation.
+ * The configuration for a particular DS hardware implementation:
  */
 struct ds_configuration {
-	/* the name of the configuration */
-	const char *name;
-	/* the size of one pointer-typed field in the DS structure and
-	   in the BTS and PEBS buffers in bytes;
-	   this covers the first 8 DS fields related to buffer management. */
-	unsigned char  sizeof_field;
-	/* the size of a BTS/PEBS record in bytes */
-	unsigned char  sizeof_rec[2];
-	/* a series of bit-masks to control various features indexed
-	 * by enum ds_feature */
-	unsigned long ctl[dsf_ctl_max];
+	/* The name of the configuration: */
+	const char		*name;
+
+	/* The size of pointer-typed fields in DS, BTS, and PEBS: */
+	unsigned char		sizeof_ptr_field;
+
+	/* The size of a BTS/PEBS record in bytes: */
+	unsigned char		sizeof_rec[2];
+
+	/* The number of pebs counter reset values in the DS structure. */
+	unsigned char		nr_counter_reset;
+
+	/* Control bit-masks indexed by enum ds_feature: */
+	unsigned long		ctl[dsf_ctl_max];
 };
-static DEFINE_PER_CPU(struct ds_configuration, ds_cfg_array);
+static struct ds_configuration ds_cfg __read_mostly;
+
+
+/* Maximal size of a DS configuration: */
+#define MAX_SIZEOF_DS		0x80
 
-#define ds_cfg per_cpu(ds_cfg_array, smp_processor_id())
+/* Maximal size of a BTS record: */
+#define MAX_SIZEOF_BTS		(3 * 8)
 
-#define MAX_SIZEOF_DS (12 * 8)	/* maximal size of a DS configuration */
-#define MAX_SIZEOF_BTS (3 * 8)	/* maximal size of a BTS record */
-#define DS_ALIGNMENT (1 << 3)	/* BTS and PEBS buffer alignment */
+/* BTS and PEBS buffer alignment: */
+#define DS_ALIGNMENT		(1 << 3)
 
-#define BTS_CONTROL \
- (ds_cfg.ctl[dsf_bts] | ds_cfg.ctl[dsf_bts_kernel] | ds_cfg.ctl[dsf_bts_user] |\
-  ds_cfg.ctl[dsf_bts_overflow])
+/* Number of buffer pointers in DS: */
+#define NUM_DS_PTR_FIELDS	8
 
+/* Size of a pebs reset value in DS: */
+#define PEBS_RESET_FIELD_SIZE	8
+
+/* Mask of control bits in the DS MSR register: */
+#define BTS_CONTROL				  \
+	( ds_cfg.ctl[dsf_bts]			| \
+	  ds_cfg.ctl[dsf_bts_kernel]		| \
+	  ds_cfg.ctl[dsf_bts_user]		| \
+	  ds_cfg.ctl[dsf_bts_overflow] )
 
 /*
  * A BTS or PEBS tracer.
@@ -66,29 +82,36 @@ static DEFINE_PER_CPU(struct ds_configuration, ds_cfg_array);
  * to identify tracers.
  */
 struct ds_tracer {
-	/* the DS context (partially) owned by this tracer */
-	struct ds_context *context;
-	/* the buffer provided on ds_request() and its size in bytes */
-	void *buffer;
-	size_t size;
+	/* The DS context (partially) owned by this tracer. */
+	struct ds_context	*context;
+	/* The buffer provided on ds_request() and its size in bytes. */
+	void			*buffer;
+	size_t			size;
 };
 
 struct bts_tracer {
-	/* the common DS part */
-	struct ds_tracer ds;
-	/* the trace including the DS configuration */
-	struct bts_trace trace;
-	/* buffer overflow notification function */
-	bts_ovfl_callback_t ovfl;
+	/* The common DS part: */
+	struct ds_tracer	ds;
+
+	/* The trace including the DS configuration: */
+	struct bts_trace	trace;
+
+	/* Buffer overflow notification function: */
+	bts_ovfl_callback_t	ovfl;
+
+	/* Active flags affecting trace collection. */
+	unsigned int		flags;
 };
 
 struct pebs_tracer {
-	/* the common DS part */
-	struct ds_tracer ds;
-	/* the trace including the DS configuration */
-	struct pebs_trace trace;
-	/* buffer overflow notification function */
-	pebs_ovfl_callback_t ovfl;
+	/* The common DS part: */
+	struct ds_tracer	ds;
+
+	/* The trace including the DS configuration: */
+	struct pebs_trace	trace;
+
+	/* Buffer overflow notification function: */
+	pebs_ovfl_callback_t	ovfl;
 };
 
 /*
@@ -97,6 +120,7 @@ struct pebs_tracer {
  *
  * The DS configuration consists of the following fields; different
  * architetures vary in the size of those fields.
+ *
  * - double-word aligned base linear address of the BTS buffer
  * - write pointer into the BTS buffer
  * - end linear address of the BTS buffer (one byte beyond the end of
@@ -135,21 +159,22 @@ enum ds_field {
 };
 
 enum ds_qualifier {
-	ds_bts  = 0,
+	ds_bts = 0,
 	ds_pebs
 };
 
-static inline unsigned long ds_get(const unsigned char *base,
-				   enum ds_qualifier qual, enum ds_field field)
+static inline unsigned long
+ds_get(const unsigned char *base, enum ds_qualifier qual, enum ds_field field)
 {
-	base += (ds_cfg.sizeof_field * (field + (4 * qual)));
+	base += (ds_cfg.sizeof_ptr_field * (field + (4 * qual)));
 	return *(unsigned long *)base;
 }
 
-static inline void ds_set(unsigned char *base, enum ds_qualifier qual,
-			  enum ds_field field, unsigned long value)
+static inline void
+ds_set(unsigned char *base, enum ds_qualifier qual, enum ds_field field,
+       unsigned long value)
 {
-	base += (ds_cfg.sizeof_field * (field + (4 * qual)));
+	base += (ds_cfg.sizeof_ptr_field * (field + (4 * qual)));
 	(*(unsigned long *)base) = value;
 }
 
@@ -159,7 +184,6 @@ static inline void ds_set(unsigned char *base, enum ds_qualifier qual,
  */
 static DEFINE_SPINLOCK(ds_lock);
 
-
 /*
  * We either support (system-wide) per-cpu or per-thread allocation.
  * We distinguish the two based on the task_struct pointer, where a
@@ -178,12 +202,28 @@ static DEFINE_SPINLOCK(ds_lock);
  */
 static atomic_t tracers = ATOMIC_INIT(0);
 
-static inline void get_tracer(struct task_struct *task)
+static inline int get_tracer(struct task_struct *task)
 {
-	if (task)
+	int error;
+
+	spin_lock_irq(&ds_lock);
+
+	if (task) {
+		error = -EPERM;
+		if (atomic_read(&tracers) < 0)
+			goto out;
 		atomic_inc(&tracers);
-	else
+	} else {
+		error = -EPERM;
+		if (atomic_read(&tracers) > 0)
+			goto out;
 		atomic_dec(&tracers);
+	}
+
+	error = 0;
+out:
+	spin_unlock_irq(&ds_lock);
+	return error;
 }
 
 static inline void put_tracer(struct task_struct *task)
@@ -194,14 +234,6 @@ static inline void put_tracer(struct task_struct *task)
 		atomic_inc(&tracers);
 }
 
-static inline int check_tracer(struct task_struct *task)
-{
-	return task ?
-		(atomic_read(&tracers) >= 0) :
-		(atomic_read(&tracers) <= 0);
-}
-
-
 /*
  * The DS context is either attached to a thread or to a cpu:
  * - in the former case, the thread_struct contains a pointer to the
@@ -213,61 +245,58 @@ static inline int check_tracer(struct task_struct *task)
  * deallocated when the last user puts the context.
  */
 struct ds_context {
-	/* pointer to the DS configuration; goes into MSR_IA32_DS_AREA */
-	unsigned char ds[MAX_SIZEOF_DS];
-	/* the owner of the BTS and PEBS configuration, respectively */
-	struct bts_tracer *bts_master;
-	struct pebs_tracer *pebs_master;
-	/* use count */
-	unsigned long count;
-	/* a pointer to the context location inside the thread_struct
-	 * or the per_cpu context array */
-	struct ds_context **this;
-	/* a pointer to the task owning this context, or NULL, if the
-	 * context is owned by a cpu */
-	struct task_struct *task;
-};
+	/* The DS configuration; goes into MSR_IA32_DS_AREA: */
+	unsigned char		ds[MAX_SIZEOF_DS];
+
+	/* The owner of the BTS and PEBS configuration, respectively: */
+	struct bts_tracer	*bts_master;
+	struct pebs_tracer	*pebs_master;
 
-static DEFINE_PER_CPU(struct ds_context *, system_context_array);
+	/* Use count: */
+	unsigned long		count;
 
-#define system_context per_cpu(system_context_array, smp_processor_id())
+	/* Pointer to the context pointer field: */
+	struct ds_context	**this;
+
+	/* The traced task; NULL for cpu tracing: */
+	struct task_struct	*task;
+
+	/* The traced cpu; only valid if task is NULL: */
+	int			cpu;
+};
 
+static DEFINE_PER_CPU(struct ds_context *, cpu_context);
 
-static inline struct ds_context *ds_get_context(struct task_struct *task)
+
+static struct ds_context *ds_get_context(struct task_struct *task, int cpu)
 {
 	struct ds_context **p_context =
-		(task ? &task->thread.ds_ctx : &system_context);
+		(task ? &task->thread.ds_ctx : &per_cpu(cpu_context, cpu));
 	struct ds_context *context = NULL;
 	struct ds_context *new_context = NULL;
-	unsigned long irq;
 
 	/* Chances are small that we already have a context. */
 	new_context = kzalloc(sizeof(*new_context), GFP_KERNEL);
 	if (!new_context)
 		return NULL;
 
-	spin_lock_irqsave(&ds_lock, irq);
+	spin_lock_irq(&ds_lock);
 
 	context = *p_context;
-	if (!context) {
+	if (likely(!context)) {
 		context = new_context;
 
 		context->this = p_context;
 		context->task = task;
+		context->cpu = cpu;
 		context->count = 0;
 
-		if (task)
-			set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
-
-		if (!task || (task == current))
-			wrmsrl(MSR_IA32_DS_AREA, (unsigned long)context->ds);
-
 		*p_context = context;
 	}
 
 	context->count++;
 
-	spin_unlock_irqrestore(&ds_lock, irq);
+	spin_unlock_irq(&ds_lock);
 
 	if (context != new_context)
 		kfree(new_context);
@@ -275,8 +304,9 @@ static inline struct ds_context *ds_get_context(struct task_struct *task)
 	return context;
 }
 
-static inline void ds_put_context(struct ds_context *context)
+static void ds_put_context(struct ds_context *context)
 {
+	struct task_struct *task;
 	unsigned long irq;
 
 	if (!context)
@@ -291,17 +321,55 @@ static inline void ds_put_context(struct ds_context *context)
 
 	*(context->this) = NULL;
 
-	if (context->task)
-		clear_tsk_thread_flag(context->task, TIF_DS_AREA_MSR);
+	task = context->task;
+
+	if (task)
+		clear_tsk_thread_flag(task, TIF_DS_AREA_MSR);
 
-	if (!context->task || (context->task == current))
-		wrmsrl(MSR_IA32_DS_AREA, 0);
+	/*
+	 * We leave the (now dangling) pointer to the DS configuration in
+	 * the DS_AREA msr. This is as good or as bad as replacing it with
+	 * NULL - the hardware would crash if we enabled tracing.
+	 *
+	 * This saves us some problems with having to write an msr on a
+	 * different cpu while preventing others from doing the same for the
+	 * next context for that same cpu.
+	 */
 
 	spin_unlock_irqrestore(&ds_lock, irq);
 
+	/* The context might still be in use for context switching. */
+	if (task && (task != current))
+		wait_task_context_switch(task);
+
 	kfree(context);
 }
 
+static void ds_install_ds_area(struct ds_context *context)
+{
+	unsigned long ds;
+
+	ds = (unsigned long)context->ds;
+
+	/*
+	 * There is a race between the bts master and the pebs master.
+	 *
+	 * The thread/cpu access is synchronized via get/put_cpu() for
+	 * task tracing and via wrmsr_on_cpu for cpu tracing.
+	 *
+	 * If bts and pebs are collected for the same task or same cpu,
+	 * the same confiuration is written twice.
+	 */
+	if (context->task) {
+		get_cpu();
+		if (context->task == current)
+			wrmsrl(MSR_IA32_DS_AREA, ds);
+		set_tsk_thread_flag(context->task, TIF_DS_AREA_MSR);
+		put_cpu();
+	} else
+		wrmsr_on_cpu(context->cpu, MSR_IA32_DS_AREA,
+			     (u32)((u64)ds), (u32)((u64)ds >> 32));
+}
 
 /*
  * Call the tracer's callback on a buffer overflow.
@@ -332,9 +400,9 @@ static void ds_overflow(struct ds_context *context, enum ds_qualifier qual)
  * The remainder of any partially written record is zeroed out.
  *
  * context: the DS context
- * qual: the buffer type
- * record: the data to write
- * size: the size of the data
+ * qual:    the buffer type
+ * record:  the data to write
+ * size:    the size of the data
  */
 static int ds_write(struct ds_context *context, enum ds_qualifier qual,
 		    const void *record, size_t size)
@@ -349,14 +417,14 @@ static int ds_write(struct ds_context *context, enum ds_qualifier qual,
 		unsigned long write_size, adj_write_size;
 
 		/*
-		 * write as much as possible without producing an
+		 * Write as much as possible without producing an
 		 * overflow interrupt.
 		 *
-		 * interrupt_threshold must either be
+		 * Interrupt_threshold must either be
 		 * - bigger than absolute_maximum or
 		 * - point to a record between buffer_base and absolute_maximum
 		 *
-		 * index points to a valid record.
+		 * Index points to a valid record.
 		 */
 		base   = ds_get(context->ds, qual, ds_buffer_base);
 		index  = ds_get(context->ds, qual, ds_index);
@@ -365,8 +433,10 @@ static int ds_write(struct ds_context *context, enum ds_qualifier qual,
 
 		write_end = min(end, int_th);
 
-		/* if we are already beyond the interrupt threshold,
-		 * we fill the entire buffer */
+		/*
+		 * If we are already beyond the interrupt threshold,
+		 * we fill the entire buffer.
+		 */
 		if (write_end <= index)
 			write_end = end;
 
@@ -383,7 +453,7 @@ static int ds_write(struct ds_context *context, enum ds_qualifier qual,
 		adj_write_size = write_size / ds_cfg.sizeof_rec[qual];
 		adj_write_size *= ds_cfg.sizeof_rec[qual];
 
-		/* zero out trailing bytes */
+		/* Zero out trailing bytes. */
 		memset((char *)index + write_size, 0,
 		       adj_write_size - write_size);
 		index += adj_write_size;
@@ -410,7 +480,7 @@ static int ds_write(struct ds_context *context, enum ds_qualifier qual,
  * Later architectures use 64bit pointers throughout, whereas earlier
  * architectures use 32bit pointers in 32bit mode.
  *
- * We compute the base address for the first 8 fields based on:
+ * We compute the base address for the fields based on:
  * - the field size stored in the DS configuration
  * - the relative field position
  *
@@ -431,23 +501,23 @@ enum bts_field {
 	bts_to,
 	bts_flags,
 
-	bts_qual = bts_from,
-	bts_jiffies = bts_to,
-	bts_pid = bts_flags,
+	bts_qual		= bts_from,
+	bts_clock		= bts_to,
+	bts_pid			= bts_flags,
 
-	bts_qual_mask = (bts_qual_max - 1),
-	bts_escape = ((unsigned long)-1 & ~bts_qual_mask)
+	bts_qual_mask		= (bts_qual_max - 1),
+	bts_escape		= ((unsigned long)-1 & ~bts_qual_mask)
 };
 
 static inline unsigned long bts_get(const char *base, enum bts_field field)
 {
-	base += (ds_cfg.sizeof_field * field);
+	base += (ds_cfg.sizeof_ptr_field * field);
 	return *(unsigned long *)base;
 }
 
 static inline void bts_set(char *base, enum bts_field field, unsigned long val)
 {
-	base += (ds_cfg.sizeof_field * field);;
+	base += (ds_cfg.sizeof_ptr_field * field);;
 	(*(unsigned long *)base) = val;
 }
 
@@ -463,8 +533,8 @@ static inline void bts_set(char *base, enum bts_field field, unsigned long val)
  *
  * return: bytes read/written on success; -Eerrno, otherwise
  */
-static int bts_read(struct bts_tracer *tracer, const void *at,
-		    struct bts_struct *out)
+static int
+bts_read(struct bts_tracer *tracer, const void *at, struct bts_struct *out)
 {
 	if (!tracer)
 		return -EINVAL;
@@ -478,8 +548,8 @@ static int bts_read(struct bts_tracer *tracer, const void *at,
 	memset(out, 0, sizeof(*out));
 	if ((bts_get(at, bts_qual) & ~bts_qual_mask) == bts_escape) {
 		out->qualifier = (bts_get(at, bts_qual) & bts_qual_mask);
-		out->variant.timestamp.jiffies = bts_get(at, bts_jiffies);
-		out->variant.timestamp.pid = bts_get(at, bts_pid);
+		out->variant.event.clock = bts_get(at, bts_clock);
+		out->variant.event.pid = bts_get(at, bts_pid);
 	} else {
 		out->qualifier = bts_branch;
 		out->variant.lbr.from = bts_get(at, bts_from);
@@ -516,8 +586,8 @@ static int bts_write(struct bts_tracer *tracer, const struct bts_struct *in)
 	case bts_task_arrives:
 	case bts_task_departs:
 		bts_set(raw, bts_qual, (bts_escape | in->qualifier));
-		bts_set(raw, bts_jiffies, in->variant.timestamp.jiffies);
-		bts_set(raw, bts_pid, in->variant.timestamp.pid);
+		bts_set(raw, bts_clock, in->variant.event.clock);
+		bts_set(raw, bts_pid, in->variant.event.pid);
 		break;
 	default:
 		return -EINVAL;
@@ -555,7 +625,8 @@ static void ds_init_ds_trace(struct ds_trace *trace, enum ds_qualifier qual,
 			     unsigned int flags) {
 	unsigned long buffer, adj;
 
-	/* adjust the buffer address and size to meet alignment
+	/*
+	 * Adjust the buffer address and size to meet alignment
 	 * constraints:
 	 * - buffer is double-word aligned
 	 * - size is multiple of record size
@@ -577,9 +648,11 @@ static void ds_init_ds_trace(struct ds_trace *trace, enum ds_qualifier qual,
 	trace->begin = (void *)buffer;
 	trace->top = trace->begin;
 	trace->end = (void *)(buffer + size);
-	/* The value for 'no threshold' is -1, which will set the
+	/*
+	 * The value for 'no threshold' is -1, which will set the
 	 * threshold outside of the buffer, just like we want it.
 	 */
+	ith *= ds_cfg.sizeof_rec[qual];
 	trace->ith = (void *)(buffer + size - ith);
 
 	trace->flags = flags;
@@ -588,18 +661,27 @@ static void ds_init_ds_trace(struct ds_trace *trace, enum ds_qualifier qual,
 
 static int ds_request(struct ds_tracer *tracer, struct ds_trace *trace,
 		      enum ds_qualifier qual, struct task_struct *task,
-		      void *base, size_t size, size_t th, unsigned int flags)
+		      int cpu, void *base, size_t size, size_t th)
 {
 	struct ds_context *context;
 	int error;
+	size_t req_size;
+
+	error = -EOPNOTSUPP;
+	if (!ds_cfg.sizeof_rec[qual])
+		goto out;
 
 	error = -EINVAL;
 	if (!base)
 		goto out;
 
-	/* we require some space to do alignment adjustments below */
+	req_size = ds_cfg.sizeof_rec[qual];
+	/* We might need space for alignment adjustments. */
+	if (!IS_ALIGNED((unsigned long)base, DS_ALIGNMENT))
+		req_size += DS_ALIGNMENT;
+
 	error = -EINVAL;
-	if (size < (DS_ALIGNMENT + ds_cfg.sizeof_rec[qual]))
+	if (size < req_size)
 		goto out;
 
 	if (th != (size_t)-1) {
@@ -614,182 +696,318 @@ static int ds_request(struct ds_tracer *tracer, struct ds_trace *trace,
 	tracer->size = size;
 
 	error = -ENOMEM;
-	context = ds_get_context(task);
+	context = ds_get_context(task, cpu);
 	if (!context)
 		goto out;
 	tracer->context = context;
 
-	ds_init_ds_trace(trace, qual, base, size, th, flags);
+	/*
+	 * Defer any tracer-specific initialization work for the context until
+	 * context ownership has been clarified.
+	 */
 
 	error = 0;
  out:
 	return error;
 }
 
-struct bts_tracer *ds_request_bts(struct task_struct *task,
-				  void *base, size_t size,
-				  bts_ovfl_callback_t ovfl, size_t th,
-				  unsigned int flags)
+static struct bts_tracer *ds_request_bts(struct task_struct *task, int cpu,
+					 void *base, size_t size,
+					 bts_ovfl_callback_t ovfl, size_t th,
+					 unsigned int flags)
 {
 	struct bts_tracer *tracer;
-	unsigned long irq;
 	int error;
 
+	/* Buffer overflow notification is not yet implemented. */
 	error = -EOPNOTSUPP;
-	if (!ds_cfg.ctl[dsf_bts])
+	if (ovfl)
 		goto out;
 
-	/* buffer overflow notification is not yet implemented */
-	error = -EOPNOTSUPP;
-	if (ovfl)
+	error = get_tracer(task);
+	if (error < 0)
 		goto out;
 
 	error = -ENOMEM;
 	tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
 	if (!tracer)
-		goto out;
+		goto out_put_tracer;
 	tracer->ovfl = ovfl;
 
+	/* Do some more error checking and acquire a tracing context. */
 	error = ds_request(&tracer->ds, &tracer->trace.ds,
-			   ds_bts, task, base, size, th, flags);
+			   ds_bts, task, cpu, base, size, th);
 	if (error < 0)
 		goto out_tracer;
 
-
-	spin_lock_irqsave(&ds_lock, irq);
-
-	error = -EPERM;
-	if (!check_tracer(task))
-		goto out_unlock;
-	get_tracer(task);
+	/* Claim the bts part of the tracing context we acquired above. */
+	spin_lock_irq(&ds_lock);
 
 	error = -EPERM;
 	if (tracer->ds.context->bts_master)
-		goto out_put_tracer;
+		goto out_unlock;
 	tracer->ds.context->bts_master = tracer;
 
-	spin_unlock_irqrestore(&ds_lock, irq);
+	spin_unlock_irq(&ds_lock);
 
+	/*
+	 * Now that we own the bts part of the context, let's complete the
+	 * initialization for that part.
+	 */
+	ds_init_ds_trace(&tracer->trace.ds, ds_bts, base, size, th, flags);
+	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+	ds_install_ds_area(tracer->ds.context);
 
 	tracer->trace.read  = bts_read;
 	tracer->trace.write = bts_write;
 
-	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+	/* Start tracing. */
 	ds_resume_bts(tracer);
 
 	return tracer;
 
- out_put_tracer:
-	put_tracer(task);
  out_unlock:
-	spin_unlock_irqrestore(&ds_lock, irq);
+	spin_unlock_irq(&ds_lock);
 	ds_put_context(tracer->ds.context);
  out_tracer:
 	kfree(tracer);
+ out_put_tracer:
+	put_tracer(task);
  out:
 	return ERR_PTR(error);
 }
 
-struct pebs_tracer *ds_request_pebs(struct task_struct *task,
-				    void *base, size_t size,
-				    pebs_ovfl_callback_t ovfl, size_t th,
-				    unsigned int flags)
+struct bts_tracer *ds_request_bts_task(struct task_struct *task,
+				       void *base, size_t size,
+				       bts_ovfl_callback_t ovfl,
+				       size_t th, unsigned int flags)
+{
+	return ds_request_bts(task, 0, base, size, ovfl, th, flags);
+}
+
+struct bts_tracer *ds_request_bts_cpu(int cpu, void *base, size_t size,
+				      bts_ovfl_callback_t ovfl,
+				      size_t th, unsigned int flags)
+{
+	return ds_request_bts(NULL, cpu, base, size, ovfl, th, flags);
+}
+
+static struct pebs_tracer *ds_request_pebs(struct task_struct *task, int cpu,
+					   void *base, size_t size,
+					   pebs_ovfl_callback_t ovfl, size_t th,
+					   unsigned int flags)
 {
 	struct pebs_tracer *tracer;
-	unsigned long irq;
 	int error;
 
-	/* buffer overflow notification is not yet implemented */
+	/* Buffer overflow notification is not yet implemented. */
 	error = -EOPNOTSUPP;
 	if (ovfl)
 		goto out;
 
+	error = get_tracer(task);
+	if (error < 0)
+		goto out;
+
 	error = -ENOMEM;
 	tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
 	if (!tracer)
-		goto out;
+		goto out_put_tracer;
 	tracer->ovfl = ovfl;
 
+	/* Do some more error checking and acquire a tracing context. */
 	error = ds_request(&tracer->ds, &tracer->trace.ds,
-			   ds_pebs, task, base, size, th, flags);
+			   ds_pebs, task, cpu, base, size, th);
 	if (error < 0)
 		goto out_tracer;
 
-	spin_lock_irqsave(&ds_lock, irq);
-
-	error = -EPERM;
-	if (!check_tracer(task))
-		goto out_unlock;
-	get_tracer(task);
+	/* Claim the pebs part of the tracing context we acquired above. */
+	spin_lock_irq(&ds_lock);
 
 	error = -EPERM;
 	if (tracer->ds.context->pebs_master)
-		goto out_put_tracer;
+		goto out_unlock;
 	tracer->ds.context->pebs_master = tracer;
 
-	spin_unlock_irqrestore(&ds_lock, irq);
+	spin_unlock_irq(&ds_lock);
 
+	/*
+	 * Now that we own the pebs part of the context, let's complete the
+	 * initialization for that part.
+	 */
+	ds_init_ds_trace(&tracer->trace.ds, ds_pebs, base, size, th, flags);
 	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
+	ds_install_ds_area(tracer->ds.context);
+
+	/* Start tracing. */
 	ds_resume_pebs(tracer);
 
 	return tracer;
 
- out_put_tracer:
-	put_tracer(task);
  out_unlock:
-	spin_unlock_irqrestore(&ds_lock, irq);
+	spin_unlock_irq(&ds_lock);
 	ds_put_context(tracer->ds.context);
  out_tracer:
 	kfree(tracer);
+ out_put_tracer:
+	put_tracer(task);
  out:
 	return ERR_PTR(error);
 }
 
-void ds_release_bts(struct bts_tracer *tracer)
+struct pebs_tracer *ds_request_pebs_task(struct task_struct *task,
+					 void *base, size_t size,
+					 pebs_ovfl_callback_t ovfl,
+					 size_t th, unsigned int flags)
 {
-	if (!tracer)
-		return;
+	return ds_request_pebs(task, 0, base, size, ovfl, th, flags);
+}
 
-	ds_suspend_bts(tracer);
+struct pebs_tracer *ds_request_pebs_cpu(int cpu, void *base, size_t size,
+					pebs_ovfl_callback_t ovfl,
+					size_t th, unsigned int flags)
+{
+	return ds_request_pebs(NULL, cpu, base, size, ovfl, th, flags);
+}
+
+static void ds_free_bts(struct bts_tracer *tracer)
+{
+	struct task_struct *task;
+
+	task = tracer->ds.context->task;
 
 	WARN_ON_ONCE(tracer->ds.context->bts_master != tracer);
 	tracer->ds.context->bts_master = NULL;
 
-	put_tracer(tracer->ds.context->task);
+	/* Make sure tracing stopped and the tracer is not in use. */
+	if (task && (task != current))
+		wait_task_context_switch(task);
+
 	ds_put_context(tracer->ds.context);
+	put_tracer(task);
 
 	kfree(tracer);
 }
 
+void ds_release_bts(struct bts_tracer *tracer)
+{
+	might_sleep();
+
+	if (!tracer)
+		return;
+
+	ds_suspend_bts(tracer);
+	ds_free_bts(tracer);
+}
+
+int ds_release_bts_noirq(struct bts_tracer *tracer)
+{
+	struct task_struct *task;
+	unsigned long irq;
+	int error;
+
+	if (!tracer)
+		return 0;
+
+	task = tracer->ds.context->task;
+
+	local_irq_save(irq);
+
+	error = -EPERM;
+	if (!task &&
+	    (tracer->ds.context->cpu != smp_processor_id()))
+		goto out;
+
+	error = -EPERM;
+	if (task && (task != current))
+		goto out;
+
+	ds_suspend_bts_noirq(tracer);
+	ds_free_bts(tracer);
+
+	error = 0;
+ out:
+	local_irq_restore(irq);
+	return error;
+}
+
+static void update_task_debugctlmsr(struct task_struct *task,
+				    unsigned long debugctlmsr)
+{
+	task->thread.debugctlmsr = debugctlmsr;
+
+	get_cpu();
+	if (task == current)
+		update_debugctlmsr(debugctlmsr);
+	put_cpu();
+}
+
 void ds_suspend_bts(struct bts_tracer *tracer)
 {
 	struct task_struct *task;
+	unsigned long debugctlmsr;
+	int cpu;
 
 	if (!tracer)
 		return;
 
+	tracer->flags = 0;
+
 	task = tracer->ds.context->task;
+	cpu  = tracer->ds.context->cpu;
 
-	if (!task || (task == current))
-		update_debugctlmsr(get_debugctlmsr() & ~BTS_CONTROL);
+	WARN_ON(!task && irqs_disabled());
 
-	if (task) {
-		task->thread.debugctlmsr &= ~BTS_CONTROL;
+	debugctlmsr = (task ?
+		       task->thread.debugctlmsr :
+		       get_debugctlmsr_on_cpu(cpu));
+	debugctlmsr &= ~BTS_CONTROL;
 
-		if (!task->thread.debugctlmsr)
-			clear_tsk_thread_flag(task, TIF_DEBUGCTLMSR);
-	}
+	if (task)
+		update_task_debugctlmsr(task, debugctlmsr);
+	else
+		update_debugctlmsr_on_cpu(cpu, debugctlmsr);
 }
 
-void ds_resume_bts(struct bts_tracer *tracer)
+int ds_suspend_bts_noirq(struct bts_tracer *tracer)
 {
 	struct task_struct *task;
-	unsigned long control;
+	unsigned long debugctlmsr, irq;
+	int cpu, error = 0;
 
 	if (!tracer)
-		return;
+		return 0;
+
+	tracer->flags = 0;
 
 	task = tracer->ds.context->task;
+	cpu  = tracer->ds.context->cpu;
+
+	local_irq_save(irq);
+
+	error = -EPERM;
+	if (!task && (cpu != smp_processor_id()))
+		goto out;
+
+	debugctlmsr = (task ?
+		       task->thread.debugctlmsr :
+		       get_debugctlmsr());
+	debugctlmsr &= ~BTS_CONTROL;
+
+	if (task)
+		update_task_debugctlmsr(task, debugctlmsr);
+	else
+		update_debugctlmsr(debugctlmsr);
+
+	error = 0;
+ out:
+	local_irq_restore(irq);
+	return error;
+}
+
+static unsigned long ds_bts_control(struct bts_tracer *tracer)
+{
+	unsigned long control;
 
 	control = ds_cfg.ctl[dsf_bts];
 	if (!(tracer->trace.ds.flags & BTS_KERNEL))
@@ -797,41 +1015,149 @@ void ds_resume_bts(struct bts_tracer *tracer)
 	if (!(tracer->trace.ds.flags & BTS_USER))
 		control |= ds_cfg.ctl[dsf_bts_user];
 
-	if (task) {
-		task->thread.debugctlmsr |= control;
-		set_tsk_thread_flag(task, TIF_DEBUGCTLMSR);
-	}
-
-	if (!task || (task == current))
-		update_debugctlmsr(get_debugctlmsr() | control);
+	return control;
 }
 
-void ds_release_pebs(struct pebs_tracer *tracer)
+void ds_resume_bts(struct bts_tracer *tracer)
 {
+	struct task_struct *task;
+	unsigned long debugctlmsr;
+	int cpu;
+
 	if (!tracer)
 		return;
 
-	ds_suspend_pebs(tracer);
+	tracer->flags = tracer->trace.ds.flags;
+
+	task = tracer->ds.context->task;
+	cpu  = tracer->ds.context->cpu;
+
+	WARN_ON(!task && irqs_disabled());
+
+	debugctlmsr = (task ?
+		       task->thread.debugctlmsr :
+		       get_debugctlmsr_on_cpu(cpu));
+	debugctlmsr |= ds_bts_control(tracer);
+
+	if (task)
+		update_task_debugctlmsr(task, debugctlmsr);
+	else
+		update_debugctlmsr_on_cpu(cpu, debugctlmsr);
+}
+
+int ds_resume_bts_noirq(struct bts_tracer *tracer)
+{
+	struct task_struct *task;
+	unsigned long debugctlmsr, irq;
+	int cpu, error = 0;
+
+	if (!tracer)
+		return 0;
+
+	tracer->flags = tracer->trace.ds.flags;
+
+	task = tracer->ds.context->task;
+	cpu  = tracer->ds.context->cpu;
+
+	local_irq_save(irq);
+
+	error = -EPERM;
+	if (!task && (cpu != smp_processor_id()))
+		goto out;
+
+	debugctlmsr = (task ?
+		       task->thread.debugctlmsr :
+		       get_debugctlmsr());
+	debugctlmsr |= ds_bts_control(tracer);
+
+	if (task)
+		update_task_debugctlmsr(task, debugctlmsr);
+	else
+		update_debugctlmsr(debugctlmsr);
+
+	error = 0;
+ out:
+	local_irq_restore(irq);
+	return error;
+}
+
+static void ds_free_pebs(struct pebs_tracer *tracer)
+{
+	struct task_struct *task;
+
+	task = tracer->ds.context->task;
 
 	WARN_ON_ONCE(tracer->ds.context->pebs_master != tracer);
 	tracer->ds.context->pebs_master = NULL;
 
-	put_tracer(tracer->ds.context->task);
 	ds_put_context(tracer->ds.context);
+	put_tracer(task);
 
 	kfree(tracer);
 }
 
+void ds_release_pebs(struct pebs_tracer *tracer)
+{
+	might_sleep();
+
+	if (!tracer)
+		return;
+
+	ds_suspend_pebs(tracer);
+	ds_free_pebs(tracer);
+}
+
+int ds_release_pebs_noirq(struct pebs_tracer *tracer)
+{
+	struct task_struct *task;
+	unsigned long irq;
+	int error;
+
+	if (!tracer)
+		return 0;
+
+	task = tracer->ds.context->task;
+
+	local_irq_save(irq);
+
+	error = -EPERM;
+	if (!task &&
+	    (tracer->ds.context->cpu != smp_processor_id()))
+		goto out;
+
+	error = -EPERM;
+	if (task && (task != current))
+		goto out;
+
+	ds_suspend_pebs_noirq(tracer);
+	ds_free_pebs(tracer);
+
+	error = 0;
+ out:
+	local_irq_restore(irq);
+	return error;
+}
+
 void ds_suspend_pebs(struct pebs_tracer *tracer)
 {
 
 }
 
+int ds_suspend_pebs_noirq(struct pebs_tracer *tracer)
+{
+	return 0;
+}
+
 void ds_resume_pebs(struct pebs_tracer *tracer)
 {
 
 }
 
+int ds_resume_pebs_noirq(struct pebs_tracer *tracer)
+{
+	return 0;
+}
+
 const struct bts_trace *ds_read_bts(struct bts_tracer *tracer)
 {
 	if (!tracer)
@@ -847,8 +1173,12 @@ const struct pebs_trace *ds_read_pebs(struct pebs_tracer *tracer)
 		return NULL;
 
 	ds_read_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
-	tracer->trace.reset_value =
-		*(u64 *)(tracer->ds.context->ds + (ds_cfg.sizeof_field * 8));
+
+	tracer->trace.counters = ds_cfg.nr_counter_reset;
+	memcpy(tracer->trace.counter_reset,
+	       tracer->ds.context->ds +
+	       (NUM_DS_PTR_FIELDS * ds_cfg.sizeof_ptr_field),
+	       ds_cfg.nr_counter_reset * PEBS_RESET_FIELD_SIZE);
 
 	return &tracer->trace;
 }
@@ -873,18 +1203,24 @@ int ds_reset_pebs(struct pebs_tracer *tracer)
 
 	tracer->trace.ds.top = tracer->trace.ds.begin;
 
-	ds_set(tracer->ds.context->ds, ds_bts, ds_index,
+	ds_set(tracer->ds.context->ds, ds_pebs, ds_index,
 	       (unsigned long)tracer->trace.ds.top);
 
 	return 0;
 }
 
-int ds_set_pebs_reset(struct pebs_tracer *tracer, u64 value)
+int ds_set_pebs_reset(struct pebs_tracer *tracer,
+		      unsigned int counter, u64 value)
 {
 	if (!tracer)
 		return -EINVAL;
 
-	*(u64 *)(tracer->ds.context->ds + (ds_cfg.sizeof_field * 8)) = value;
+	if (ds_cfg.nr_counter_reset < counter)
+		return -EINVAL;
+
+	*(u64 *)(tracer->ds.context->ds +
+		 (NUM_DS_PTR_FIELDS * ds_cfg.sizeof_ptr_field) +
+		 (counter * PEBS_RESET_FIELD_SIZE)) = value;
 
 	return 0;
 }
@@ -894,73 +1230,117 @@ static const struct ds_configuration ds_cfg_netburst = {
 	.ctl[dsf_bts]		= (1 << 2) | (1 << 3),
 	.ctl[dsf_bts_kernel]	= (1 << 5),
 	.ctl[dsf_bts_user]	= (1 << 6),
-
-	.sizeof_field		= sizeof(long),
-	.sizeof_rec[ds_bts]	= sizeof(long) * 3,
-#ifdef __i386__
-	.sizeof_rec[ds_pebs]	= sizeof(long) * 10,
-#else
-	.sizeof_rec[ds_pebs]	= sizeof(long) * 18,
-#endif
+	.nr_counter_reset	= 1,
 };
 static const struct ds_configuration ds_cfg_pentium_m = {
 	.name = "Pentium M",
 	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
-
-	.sizeof_field		= sizeof(long),
-	.sizeof_rec[ds_bts]	= sizeof(long) * 3,
-#ifdef __i386__
-	.sizeof_rec[ds_pebs]	= sizeof(long) * 10,
-#else
-	.sizeof_rec[ds_pebs]	= sizeof(long) * 18,
-#endif
+	.nr_counter_reset	= 1,
 };
 static const struct ds_configuration ds_cfg_core2_atom = {
 	.name = "Core 2/Atom",
 	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
 	.ctl[dsf_bts_kernel]	= (1 << 9),
 	.ctl[dsf_bts_user]	= (1 << 10),
-
-	.sizeof_field		= 8,
-	.sizeof_rec[ds_bts]	= 8 * 3,
-	.sizeof_rec[ds_pebs]	= 8 * 18,
+	.nr_counter_reset	= 1,
+};
+static const struct ds_configuration ds_cfg_core_i7 = {
+	.name = "Core i7",
+	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
+	.ctl[dsf_bts_kernel]	= (1 << 9),
+	.ctl[dsf_bts_user]	= (1 << 10),
+	.nr_counter_reset	= 4,
 };
 
 static void
-ds_configure(const struct ds_configuration *cfg)
+ds_configure(const struct ds_configuration *cfg,
+	     struct cpuinfo_x86 *cpu)
 {
+	unsigned long nr_pebs_fields = 0;
+
+	printk(KERN_INFO "[ds] using %s configuration\n", cfg->name);
+
+#ifdef __i386__
+	nr_pebs_fields = 10;
+#else
+	nr_pebs_fields = 18;
+#endif
+
+	/*
+	 * Starting with version 2, architectural performance
+	 * monitoring supports a format specifier.
+	 */
+	if ((cpuid_eax(0xa) & 0xff) > 1) {
+		unsigned long perf_capabilities, format;
+
+		rdmsrl(MSR_IA32_PERF_CAPABILITIES, perf_capabilities);
+
+		format = (perf_capabilities >> 8) & 0xf;
+
+		switch (format) {
+		case 0:
+			nr_pebs_fields = 18;
+			break;
+		case 1:
+			nr_pebs_fields = 22;
+			break;
+		default:
+			printk(KERN_INFO
+			       "[ds] unknown PEBS format: %lu\n", format);
+			nr_pebs_fields = 0;
+			break;
+		}
+	}
+
 	memset(&ds_cfg, 0, sizeof(ds_cfg));
 	ds_cfg = *cfg;
 
-	printk(KERN_INFO "[ds] using %s configuration\n", ds_cfg.name);
+	ds_cfg.sizeof_ptr_field =
+		(cpu_has(cpu, X86_FEATURE_DTES64) ? 8 : 4);
+
+	ds_cfg.sizeof_rec[ds_bts]  = ds_cfg.sizeof_ptr_field * 3;
+	ds_cfg.sizeof_rec[ds_pebs] = ds_cfg.sizeof_ptr_field * nr_pebs_fields;
 
-	if (!cpu_has_bts) {
-		ds_cfg.ctl[dsf_bts] = 0;
+	if (!cpu_has(cpu, X86_FEATURE_BTS)) {
+		ds_cfg.sizeof_rec[ds_bts] = 0;
 		printk(KERN_INFO "[ds] bts not available\n");
 	}
-	if (!cpu_has_pebs)
+	if (!cpu_has(cpu, X86_FEATURE_PEBS)) {
+		ds_cfg.sizeof_rec[ds_pebs] = 0;
 		printk(KERN_INFO "[ds] pebs not available\n");
+	}
+
+	printk(KERN_INFO "[ds] sizes: address: %u bit, ",
+	       8 * ds_cfg.sizeof_ptr_field);
+	printk("bts/pebs record: %u/%u bytes\n",
+	       ds_cfg.sizeof_rec[ds_bts], ds_cfg.sizeof_rec[ds_pebs]);
 
-	WARN_ON_ONCE(MAX_SIZEOF_DS < (12 * ds_cfg.sizeof_field));
+	WARN_ON_ONCE(MAX_PEBS_COUNTERS < ds_cfg.nr_counter_reset);
 }
 
 void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
 {
+	/* Only configure the first cpu. Others are identical. */
+	if (ds_cfg.name)
+		return;
+
 	switch (c->x86) {
 	case 0x6:
 		switch (c->x86_model) {
 		case 0x9:
 		case 0xd: /* Pentium M */
-			ds_configure(&ds_cfg_pentium_m);
+			ds_configure(&ds_cfg_pentium_m, c);
 			break;
 		case 0xf:
 		case 0x17: /* Core2 */
 		case 0x1c: /* Atom */
-			ds_configure(&ds_cfg_core2_atom);
+			ds_configure(&ds_cfg_core2_atom, c);
+			break;
+		case 0x1a: /* Core i7 */
+			ds_configure(&ds_cfg_core_i7, c);
 			break;
-		case 0x1a: /* i7 */
 		default:
-			/* sorry, don't know about them */
+			/* Sorry, don't know about them. */
 			break;
 		}
 		break;
@@ -969,64 +1349,89 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
 		case 0x0:
 		case 0x1:
 		case 0x2: /* Netburst */
-			ds_configure(&ds_cfg_netburst);
+			ds_configure(&ds_cfg_netburst, c);
 			break;
 		default:
-			/* sorry, don't know about them */
+			/* Sorry, don't know about them. */
 			break;
 		}
 		break;
 	default:
-		/* sorry, don't know about them */
+		/* Sorry, don't know about them. */
 		break;
 	}
 }
 
+static inline void ds_take_timestamp(struct ds_context *context,
+				     enum bts_qualifier qualifier,
+				     struct task_struct *task)
+{
+	struct bts_tracer *tracer = context->bts_master;
+	struct bts_struct ts;
+
+	/* Prevent compilers from reading the tracer pointer twice. */
+	barrier();
+
+	if (!tracer || !(tracer->flags & BTS_TIMESTAMPS))
+		return;
+
+	memset(&ts, 0, sizeof(ts));
+	ts.qualifier		= qualifier;
+	ts.variant.event.clock	= trace_clock_global();
+	ts.variant.event.pid	= task->pid;
+
+	bts_write(tracer, &ts);
+}
+
 /*
  * Change the DS configuration from tracing prev to tracing next.
  */
 void ds_switch_to(struct task_struct *prev, struct task_struct *next)
 {
-	struct ds_context *prev_ctx = prev->thread.ds_ctx;
-	struct ds_context *next_ctx = next->thread.ds_ctx;
+	struct ds_context *prev_ctx	= prev->thread.ds_ctx;
+	struct ds_context *next_ctx	= next->thread.ds_ctx;
+	unsigned long debugctlmsr	= next->thread.debugctlmsr;
+
+	/* Make sure all data is read before we start. */
+	barrier();
 
 	if (prev_ctx) {
 		update_debugctlmsr(0);
 
-		if (prev_ctx->bts_master &&
-		    (prev_ctx->bts_master->trace.ds.flags & BTS_TIMESTAMPS)) {
-			struct bts_struct ts = {
-				.qualifier = bts_task_departs,
-				.variant.timestamp.jiffies = jiffies_64,
-				.variant.timestamp.pid = prev->pid
-			};
-			bts_write(prev_ctx->bts_master, &ts);
-		}
+		ds_take_timestamp(prev_ctx, bts_task_departs, prev);
 	}
 
 	if (next_ctx) {
-		if (next_ctx->bts_master &&
-		    (next_ctx->bts_master->trace.ds.flags & BTS_TIMESTAMPS)) {
-			struct bts_struct ts = {
-				.qualifier = bts_task_arrives,
-				.variant.timestamp.jiffies = jiffies_64,
-				.variant.timestamp.pid = next->pid
-			};
-			bts_write(next_ctx->bts_master, &ts);
-		}
+		ds_take_timestamp(next_ctx, bts_task_arrives, next);
 
 		wrmsrl(MSR_IA32_DS_AREA, (unsigned long)next_ctx->ds);
 	}
 
-	update_debugctlmsr(next->thread.debugctlmsr);
+	update_debugctlmsr(debugctlmsr);
 }
 
-void ds_copy_thread(struct task_struct *tsk, struct task_struct *father)
+static __init int ds_selftest(void)
 {
-	clear_tsk_thread_flag(tsk, TIF_DS_AREA_MSR);
-	tsk->thread.ds_ctx = NULL;
-}
+	if (ds_cfg.sizeof_rec[ds_bts]) {
+		int error;
 
-void ds_exit_thread(struct task_struct *tsk)
-{
+		error = ds_selftest_bts();
+		if (error) {
+			WARN(1, "[ds] selftest failed. disabling bts.\n");
+			ds_cfg.sizeof_rec[ds_bts] = 0;
+		}
+	}
+
+	if (ds_cfg.sizeof_rec[ds_pebs]) {
+		int error;
+
+		error = ds_selftest_pebs();
+		if (error) {
+			WARN(1, "[ds] selftest failed. disabling pebs.\n");
+			ds_cfg.sizeof_rec[ds_pebs] = 0;
+		}
+	}
+
+	return 0;
 }
+device_initcall(ds_selftest);
diff --git a/arch/x86/kernel/ds_selftest.c b/arch/x86/kernel/ds_selftest.c
new file mode 100644
index 00000000000..6bc7c199ab9
--- /dev/null
+++ b/arch/x86/kernel/ds_selftest.c
@@ -0,0 +1,408 @@
+/*
+ * Debug Store support - selftest
+ *
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2009
+ */
+
+#include "ds_selftest.h"
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+
+#include <asm/ds.h>
+
+
+#define BUFFER_SIZE		521	/* Intentionally chose an odd size. */
+#define SMALL_BUFFER_SIZE	24	/* A single bts entry. */
+
+struct ds_selftest_bts_conf {
+	struct bts_tracer *tracer;
+	int error;
+	int (*suspend)(struct bts_tracer *);
+	int (*resume)(struct bts_tracer *);
+};
+
+static int ds_selftest_bts_consistency(const struct bts_trace *trace)
+{
+	int error = 0;
+
+	if (!trace) {
+		printk(KERN_CONT "failed to access trace...");
+		/* Bail out. Other tests are pointless. */
+		return -1;
+	}
+
+	if (!trace->read) {
+		printk(KERN_CONT "bts read not available...");
+		error = -1;
+	}
+
+	/* Do some sanity checks on the trace configuration. */
+	if (!trace->ds.n) {
+		printk(KERN_CONT "empty bts buffer...");
+		error = -1;
+	}
+	if (!trace->ds.size) {
+		printk(KERN_CONT "bad bts trace setup...");
+		error = -1;
+	}
+	if (trace->ds.end !=
+	    (char *)trace->ds.begin + (trace->ds.n * trace->ds.size)) {
+		printk(KERN_CONT "bad bts buffer setup...");
+		error = -1;
+	}
+	/*
+	 * We allow top in [begin; end], since its not clear when the
+	 * overflow adjustment happens: after the increment or before the
+	 * write.
+	 */
+	if ((trace->ds.top < trace->ds.begin) ||
+	    (trace->ds.end < trace->ds.top)) {
+		printk(KERN_CONT "bts top out of bounds...");
+		error = -1;
+	}
+
+	return error;
+}
+
+static int ds_selftest_bts_read(struct bts_tracer *tracer,
+				const struct bts_trace *trace,
+				const void *from, const void *to)
+{
+	const unsigned char *at;
+
+	/*
+	 * Check a few things which do not belong to this test.
+	 * They should be covered by other tests.
+	 */
+	if (!trace)
+		return -1;
+
+	if (!trace->read)
+		return -1;
+
+	if (to < from)
+		return -1;
+
+	if (from < trace->ds.begin)
+		return -1;
+
+	if (trace->ds.end < to)
+		return -1;
+
+	if (!trace->ds.size)
+		return -1;
+
+	/* Now to the test itself. */
+	for (at = from; (void *)at < to; at += trace->ds.size) {
+		struct bts_struct bts;
+		unsigned long index;
+		int error;
+
+		if (((void *)at - trace->ds.begin) % trace->ds.size) {
+			printk(KERN_CONT
+			       "read from non-integer index...");
+			return -1;
+		}
+		index = ((void *)at - trace->ds.begin) / trace->ds.size;
+
+		memset(&bts, 0, sizeof(bts));
+		error = trace->read(tracer, at, &bts);
+		if (error < 0) {
+			printk(KERN_CONT
+			       "error reading bts trace at [%lu] (0x%p)...",
+			       index, at);
+			return error;
+		}
+
+		switch (bts.qualifier) {
+		case BTS_BRANCH:
+			break;
+		default:
+			printk(KERN_CONT
+			       "unexpected bts entry %llu at [%lu] (0x%p)...",
+			       bts.qualifier, index, at);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static void ds_selftest_bts_cpu(void *arg)
+{
+	struct ds_selftest_bts_conf *conf = arg;
+	const struct bts_trace *trace;
+	void *top;
+
+	if (IS_ERR(conf->tracer)) {
+		conf->error = PTR_ERR(conf->tracer);
+		conf->tracer = NULL;
+
+		printk(KERN_CONT
+		       "initialization failed (err: %d)...", conf->error);
+		return;
+	}
+
+	/* We should meanwhile have enough trace. */
+	conf->error = conf->suspend(conf->tracer);
+	if (conf->error < 0)
+		return;
+
+	/* Let's see if we can access the trace. */
+	trace = ds_read_bts(conf->tracer);
+
+	conf->error = ds_selftest_bts_consistency(trace);
+	if (conf->error < 0)
+		return;
+
+	/* If everything went well, we should have a few trace entries. */
+	if (trace->ds.top == trace->ds.begin) {
+		/*
+		 * It is possible but highly unlikely that we got a
+		 * buffer overflow and end up at exactly the same
+		 * position we started from.
+		 * Let's issue a warning, but continue.
+		 */
+		printk(KERN_CONT "no trace/overflow...");
+	}
+
+	/* Let's try to read the trace we collected. */
+	conf->error =
+		ds_selftest_bts_read(conf->tracer, trace,
+				     trace->ds.begin, trace->ds.top);
+	if (conf->error < 0)
+		return;
+
+	/*
+	 * Let's read the trace again.
+	 * Since we suspended tracing, we should get the same result.
+	 */
+	top = trace->ds.top;
+
+	trace = ds_read_bts(conf->tracer);
+	conf->error = ds_selftest_bts_consistency(trace);
+	if (conf->error < 0)
+		return;
+
+	if (top != trace->ds.top) {
+		printk(KERN_CONT "suspend not working...");
+		conf->error = -1;
+		return;
+	}
+
+	/* Let's collect some more trace - see if resume is working. */
+	conf->error = conf->resume(conf->tracer);
+	if (conf->error < 0)
+		return;
+
+	conf->error = conf->suspend(conf->tracer);
+	if (conf->error < 0)
+		return;
+
+	trace = ds_read_bts(conf->tracer);
+
+	conf->error = ds_selftest_bts_consistency(trace);
+	if (conf->error < 0)
+		return;
+
+	if (trace->ds.top == top) {
+		/*
+		 * It is possible but highly unlikely that we got a
+		 * buffer overflow and end up at exactly the same
+		 * position we started from.
+		 * Let's issue a warning and check the full trace.
+		 */
+		printk(KERN_CONT
+		       "no resume progress/overflow...");
+
+		conf->error =
+			ds_selftest_bts_read(conf->tracer, trace,
+					     trace->ds.begin, trace->ds.end);
+	} else if (trace->ds.top < top) {
+		/*
+		 * We had a buffer overflow - the entire buffer should
+		 * contain trace records.
+		 */
+		conf->error =
+			ds_selftest_bts_read(conf->tracer, trace,
+					     trace->ds.begin, trace->ds.end);
+	} else {
+		/*
+		 * It is quite likely that the buffer did not overflow.
+		 * Let's just check the delta trace.
+		 */
+		conf->error =
+			ds_selftest_bts_read(conf->tracer, trace, top,
+					     trace->ds.top);
+	}
+	if (conf->error < 0)
+		return;
+
+	conf->error = 0;
+}
+
+static int ds_suspend_bts_wrap(struct bts_tracer *tracer)
+{
+	ds_suspend_bts(tracer);
+	return 0;
+}
+
+static int ds_resume_bts_wrap(struct bts_tracer *tracer)
+{
+	ds_resume_bts(tracer);
+	return 0;
+}
+
+static void ds_release_bts_noirq_wrap(void *tracer)
+{
+	(void)ds_release_bts_noirq(tracer);
+}
+
+static int ds_selftest_bts_bad_release_noirq(int cpu,
+					     struct bts_tracer *tracer)
+{
+	int error = -EPERM;
+
+	/* Try to release the tracer on the wrong cpu. */
+	get_cpu();
+	if (cpu != smp_processor_id()) {
+		error = ds_release_bts_noirq(tracer);
+		if (error != -EPERM)
+			printk(KERN_CONT "release on wrong cpu...");
+	}
+	put_cpu();
+
+	return error ? 0 : -1;
+}
+
+static int ds_selftest_bts_bad_request_cpu(int cpu, void *buffer)
+{
+	struct bts_tracer *tracer;
+	int error;
+
+	/* Try to request cpu tracing while task tracing is active. */
+	tracer = ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE, NULL,
+				    (size_t)-1, BTS_KERNEL);
+	error = PTR_ERR(tracer);
+	if (!IS_ERR(tracer)) {
+		ds_release_bts(tracer);
+		error = 0;
+	}
+
+	if (error != -EPERM)
+		printk(KERN_CONT "cpu/task tracing overlap...");
+
+	return error ? 0 : -1;
+}
+
+static int ds_selftest_bts_bad_request_task(void *buffer)
+{
+	struct bts_tracer *tracer;
+	int error;
+
+	/* Try to request cpu tracing while task tracing is active. */
+	tracer = ds_request_bts_task(current, buffer, BUFFER_SIZE, NULL,
+				    (size_t)-1, BTS_KERNEL);
+	error = PTR_ERR(tracer);
+	if (!IS_ERR(tracer)) {
+		error = 0;
+		ds_release_bts(tracer);
+	}
+
+	if (error != -EPERM)
+		printk(KERN_CONT "task/cpu tracing overlap...");
+
+	return error ? 0 : -1;
+}
+
+int ds_selftest_bts(void)
+{
+	struct ds_selftest_bts_conf conf;
+	unsigned char buffer[BUFFER_SIZE], *small_buffer;
+	unsigned long irq;
+	int cpu;
+
+	printk(KERN_INFO "[ds] bts selftest...");
+	conf.error = 0;
+
+	small_buffer = (unsigned char *)ALIGN((unsigned long)buffer, 8) + 8;
+
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		conf.suspend = ds_suspend_bts_wrap;
+		conf.resume = ds_resume_bts_wrap;
+		conf.tracer =
+			ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE,
+					   NULL, (size_t)-1, BTS_KERNEL);
+		ds_selftest_bts_cpu(&conf);
+		if (conf.error >= 0)
+			conf.error = ds_selftest_bts_bad_request_task(buffer);
+		ds_release_bts(conf.tracer);
+		if (conf.error < 0)
+			goto out;
+
+		conf.suspend = ds_suspend_bts_noirq;
+		conf.resume = ds_resume_bts_noirq;
+		conf.tracer =
+			ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE,
+					   NULL, (size_t)-1, BTS_KERNEL);
+		smp_call_function_single(cpu, ds_selftest_bts_cpu, &conf, 1);
+		if (conf.error >= 0) {
+			conf.error =
+				ds_selftest_bts_bad_release_noirq(cpu,
+								  conf.tracer);
+			/* We must not release the tracer twice. */
+			if (conf.error < 0)
+				conf.tracer = NULL;
+		}
+		if (conf.error >= 0)
+			conf.error = ds_selftest_bts_bad_request_task(buffer);
+		smp_call_function_single(cpu, ds_release_bts_noirq_wrap,
+					 conf.tracer, 1);
+		if (conf.error < 0)
+			goto out;
+	}
+
+	conf.suspend = ds_suspend_bts_wrap;
+	conf.resume = ds_resume_bts_wrap;
+	conf.tracer =
+		ds_request_bts_task(current, buffer, BUFFER_SIZE,
+				    NULL, (size_t)-1, BTS_KERNEL);
+	ds_selftest_bts_cpu(&conf);
+	if (conf.error >= 0)
+		conf.error = ds_selftest_bts_bad_request_cpu(0, buffer);
+	ds_release_bts(conf.tracer);
+	if (conf.error < 0)
+		goto out;
+
+	conf.suspend = ds_suspend_bts_noirq;
+	conf.resume = ds_resume_bts_noirq;
+	conf.tracer =
+		ds_request_bts_task(current, small_buffer, SMALL_BUFFER_SIZE,
+				   NULL, (size_t)-1, BTS_KERNEL);
+	local_irq_save(irq);
+	ds_selftest_bts_cpu(&conf);
+	if (conf.error >= 0)
+		conf.error = ds_selftest_bts_bad_request_cpu(0, buffer);
+	ds_release_bts_noirq(conf.tracer);
+	local_irq_restore(irq);
+	if (conf.error < 0)
+		goto out;
+
+	conf.error = 0;
+ out:
+	put_online_cpus();
+	printk(KERN_CONT "%s.\n", (conf.error ? "failed" : "passed"));
+
+	return conf.error;
+}
+
+int ds_selftest_pebs(void)
+{
+	return 0;
+}
diff --git a/arch/x86/kernel/ds_selftest.h b/arch/x86/kernel/ds_selftest.h
new file mode 100644
index 00000000000..2ba8745c666
--- /dev/null
+++ b/arch/x86/kernel/ds_selftest.h
@@ -0,0 +1,15 @@
+/*
+ * Debug Store support - selftest
+ *
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2009
+ */
+
+#ifdef CONFIG_X86_DS_SELFTEST
+extern int ds_selftest_bts(void);
+extern int ds_selftest_pebs(void);
+#else
+static inline int ds_selftest_bts(void) { return 0; }
+static inline int ds_selftest_pebs(void) { return 0; }
+#endif
diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h
index da87590b869..81086c227ab 100644
--- a/arch/x86/kernel/dumpstack.h
+++ b/arch/x86/kernel/dumpstack.h
@@ -29,7 +29,6 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *sp, unsigned long bp, char *log_lvl);
 
 extern unsigned int code_bytes;
-extern int kstack_depth_to_print;
 
 /* The form of the top of the frame on the stack */
 struct stack_frame {
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 00628130292..7271fa33d79 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -617,7 +617,7 @@ __init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
  */
 __init void e820_setup_gap(void)
 {
-	unsigned long gapstart, gapsize, round;
+	unsigned long gapstart, gapsize;
 	int found;
 
 	gapstart = 0x10000000;
@@ -635,14 +635,9 @@ __init void e820_setup_gap(void)
 #endif
 
 	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
+	 * e820_reserve_resources_late protect stolen RAM already
 	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
+	pci_mem_start = gapstart;
 
 	printk(KERN_INFO
 	       "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
@@ -1371,6 +1366,23 @@ void __init e820_reserve_resources(void)
 	}
 }
 
+/* How much should we pad RAM ending depending on where it is? */
+static unsigned long ram_alignment(resource_size_t pos)
+{
+	unsigned long mb = pos >> 20;
+
+	/* To 64kB in the first megabyte */
+	if (!mb)
+		return 64*1024;
+
+	/* To 1MB in the first 16MB */
+	if (mb < 16)
+		return 1024*1024;
+
+	/* To 32MB for anything above that */
+	return 32*1024*1024;
+}
+
 void __init e820_reserve_resources_late(void)
 {
 	int i;
@@ -1382,6 +1394,24 @@ void __init e820_reserve_resources_late(void)
 			insert_resource_expand_to_fit(&iomem_resource, res);
 		res++;
 	}
+
+	/*
+	 * Try to bump up RAM regions to reasonable boundaries to
+	 * avoid stolen RAM:
+	 */
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *entry = &e820_saved.map[i];
+		resource_size_t start, end;
+
+		if (entry->type != E820_RAM)
+			continue;
+		start = entry->addr + entry->size;
+		end = round_up(start, ram_alignment(start));
+		if (start == end)
+			continue;
+		reserve_region_with_split(&iomem_resource, start,
+						  end - 1, "RAM buffer");
+	}
 }
 
 char *__init default_machine_specific_memory_setup(void)
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 76b8cd953de..ebdb85cf268 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -97,6 +97,7 @@ static void __init nvidia_bugs(int num, int slot, int func)
 }
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
+#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
 static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
 {
 	u32 d;
@@ -114,6 +115,7 @@ static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
 	d &= 0xff;
 	return d;
 }
+#endif
 
 static void __init ati_bugs(int num, int slot, int func)
 {
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 38946c6e843..de74f0a3e0e 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -147,27 +147,14 @@ END(ftrace_graph_caller)
 GLOBAL(return_to_handler)
 	subq  $80, %rsp
 
+	/* Save the return values */
 	movq %rax, (%rsp)
-	movq %rcx, 8(%rsp)
-	movq %rdx, 16(%rsp)
-	movq %rsi, 24(%rsp)
-	movq %rdi, 32(%rsp)
-	movq %r8, 40(%rsp)
-	movq %r9, 48(%rsp)
-	movq %r10, 56(%rsp)
-	movq %r11, 64(%rsp)
+	movq %rdx, 8(%rsp)
 
 	call ftrace_return_to_handler
 
 	movq %rax, 72(%rsp)
-	movq 64(%rsp), %r11
-	movq 56(%rsp), %r10
-	movq 48(%rsp), %r9
-	movq 40(%rsp), %r8
-	movq 32(%rsp), %rdi
-	movq 24(%rsp), %rsi
-	movq 16(%rsp), %rdx
-	movq 8(%rsp), %rcx
+	movq 8(%rsp), %rdx
 	movq (%rsp), %rax
 	addq $72, %rsp
 	retq
@@ -976,6 +963,8 @@ END(\sym)
 #ifdef CONFIG_SMP
 apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
 	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+apicinterrupt REBOOT_VECTOR \
+	reboot_interrupt smp_reboot_interrupt
 #endif
 
 #ifdef CONFIG_X86_UV
@@ -1007,10 +996,15 @@ apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
 #endif
 
 apicinterrupt THRESHOLD_APIC_VECTOR \
-	threshold_interrupt mce_threshold_interrupt
+	threshold_interrupt smp_threshold_interrupt
 apicinterrupt THERMAL_APIC_VECTOR \
 	thermal_interrupt smp_thermal_interrupt
 
+#ifdef CONFIG_X86_MCE
+apicinterrupt MCE_SELF_VECTOR \
+	mce_self_interrupt smp_mce_self_interrupt
+#endif
+
 #ifdef CONFIG_SMP
 apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
 	call_function_single_interrupt smp_call_function_single_interrupt
@@ -1025,6 +1019,11 @@ apicinterrupt ERROR_APIC_VECTOR \
 apicinterrupt SPURIOUS_APIC_VECTOR \
 	spurious_interrupt smp_spurious_interrupt
 
+#ifdef CONFIG_PERF_COUNTERS
+apicinterrupt LOCAL_PENDING_VECTOR \
+	perf_pending_interrupt smp_perf_pending_interrupt
+#endif
+
 /*
  * Exception entry points.
  */
@@ -1379,10 +1378,15 @@ END(xen_failsafe_callback)
 paranoidzeroentry_ist debug do_debug DEBUG_STACK
 paranoidzeroentry_ist int3 do_int3 DEBUG_STACK
 paranoiderrorentry stack_segment do_stack_segment
+#ifdef CONFIG_XEN
+zeroentry xen_debug do_debug
+zeroentry xen_int3 do_int3
+errorentry xen_stack_segment do_stack_segment
+#endif
 errorentry general_protection do_general_protection
 errorentry page_fault do_page_fault
 #ifdef CONFIG_X86_MCE
-paranoidzeroentry machine_check do_machine_check
+paranoidzeroentry machine_check *machine_check_vector(%rip)
 #endif
 
 	/*
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 18dfa30795c..b79c5533c42 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		_ASM_EXTABLE(1b, 4b)
 		_ASM_EXTABLE(2b, 4b)
 
-		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [old] "=&r" (old), [faulted] "=r" (faulted)
 		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 30683883e0c..dc5ed4bdd88 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -608,13 +608,6 @@ ignore_int:
 ENTRY(initial_code)
 	.long i386_start_kernel
 
-.section .text
-/*
- * Real beginning of normal "text" segment
- */
-ENTRY(stext)
-ENTRY(_stext)
-
 /*
  * BSS section
  */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index c3fe010d74c..b0cdde6932f 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -12,6 +12,8 @@
 #include <asm/io_apic.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
+#include <asm/mce.h>
+#include <asm/hw_irq.h>
 
 atomic_t irq_err_count;
 
@@ -24,9 +26,9 @@ void (*generic_interrupt_extension)(void) = NULL;
  */
 void ack_bad_irq(unsigned int irq)
 {
-	printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+	if (printk_ratelimit())
+		pr_err("unexpected IRQ trap at vector %02x\n", irq);
 
-#ifdef CONFIG_X86_LOCAL_APIC
 	/*
 	 * Currently unexpected vectors happen only on SMP and APIC.
 	 * We _must_ ack these because every local APIC has only N
@@ -36,9 +38,7 @@ void ack_bad_irq(unsigned int irq)
 	 * completely.
 	 * But only ack when the APIC is enabled -AK
 	 */
-	if (cpu_has_apic)
-		ack_APIC_irq();
-#endif
+	ack_APIC_irq();
 }
 
 #define irq_stats(x)		(&per_cpu(irq_stat, x))
@@ -63,6 +63,14 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count);
 	seq_printf(p, "  Spurious interrupts\n");
+	seq_printf(p, "%*s: ", prec, "CNT");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->apic_perf_irqs);
+	seq_printf(p, "  Performance counter interrupts\n");
+	seq_printf(p, "%*s: ", prec, "PND");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->apic_pending_irqs);
+	seq_printf(p, "  Performance pending work\n");
 #endif
 	if (generic_interrupt_extension) {
 		seq_printf(p, "%*s: ", prec, "PLT");
@@ -89,13 +97,23 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
 	seq_printf(p, "  Thermal event interrupts\n");
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
 	seq_printf(p, "%*s: ", prec, "THR");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
 	seq_printf(p, "  Threshold APIC interrupts\n");
 # endif
 #endif
+#ifdef CONFIG_X86_NEW_MCE
+	seq_printf(p, "%*s: ", prec, "MCE");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(mce_exception_count, j));
+	seq_printf(p, "  Machine check exceptions\n");
+	seq_printf(p, "%*s: ", prec, "MCP");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
+	seq_printf(p, "  Machine check polls\n");
+#endif
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
 #if defined(CONFIG_X86_IO_APIC)
 	seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
@@ -166,6 +184,8 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 #ifdef CONFIG_X86_LOCAL_APIC
 	sum += irq_stats(cpu)->apic_timer_irqs;
 	sum += irq_stats(cpu)->irq_spurious_count;
+	sum += irq_stats(cpu)->apic_perf_irqs;
+	sum += irq_stats(cpu)->apic_pending_irqs;
 #endif
 	if (generic_interrupt_extension)
 		sum += irq_stats(cpu)->generic_irqs;
@@ -176,9 +196,13 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 #endif
 #ifdef CONFIG_X86_MCE
 	sum += irq_stats(cpu)->irq_thermal_count;
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
 	sum += irq_stats(cpu)->irq_threshold_count;
+# endif
 #endif
+#ifdef CONFIG_X86_NEW_MCE
+	sum += per_cpu(mce_exception_count, cpu);
+	sum += per_cpu(mce_poll_count, cpu);
 #endif
 	return sum;
 }
@@ -213,14 +237,11 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 	irq = __get_cpu_var(vector_irq)[vector];
 
 	if (!handle_irq(irq, regs)) {
-#ifdef CONFIG_X86_64
-		if (!disable_apic)
-			ack_APIC_irq();
-#endif
+		ack_APIC_irq();
 
 		if (printk_ratelimit())
-			printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n",
-			       __func__, smp_processor_id(), vector, irq);
+			pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n",
+				__func__, smp_processor_id(), vector, irq);
 	}
 
 	irq_exit();
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit.c
index 368b0a8836f..696f0e475c2 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit.c
@@ -1,20 +1,25 @@
+#include <linux/linkage.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/timex.h>
 #include <linux/slab.h>
 #include <linux/random.h>
+#include <linux/kprobes.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sysdev.h>
 #include <linux/bitops.h>
+#include <linux/acpi.h>
 #include <linux/io.h>
 #include <linux/delay.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/timer.h>
+#include <asm/hw_irq.h>
 #include <asm/pgtable.h>
 #include <asm/desc.h>
 #include <asm/apic.h>
@@ -22,7 +27,23 @@
 #include <asm/i8259.h>
 #include <asm/traps.h>
 
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
 
+#ifdef CONFIG_X86_32
 /*
  * Note that on a 486, we don't want to do a SIGFPE on an irq13
  * as the irq is unreliable, and exception 16 works correctly
@@ -52,30 +73,7 @@ static struct irqaction fpu_irq = {
 	.handler = math_error_irq,
 	.name = "fpu",
 };
-
-void __init init_ISA_irqs(void)
-{
-	int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	init_bsp_APIC();
 #endif
-	init_8259A(0);
-
-	/*
-	 * 16 old-style INTA-cycle interrupts:
-	 */
-	for (i = 0; i < NR_IRQS_LEGACY; i++) {
-		struct irq_desc *desc = irq_to_desc(i);
-
-		desc->status = IRQ_DISABLED;
-		desc->action = NULL;
-		desc->depth = 1;
-
-		set_irq_chip_and_handler_name(i, &i8259A_chip,
-					      handle_level_irq, "XT");
-	}
-}
 
 /*
  * IRQ2 is cascade interrupt to second interrupt controller
@@ -118,29 +116,37 @@ int vector_used_by_percpu_irq(unsigned int vector)
 	return 0;
 }
 
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
+static void __init init_ISA_irqs(void)
 {
 	int i;
 
-	/* Execute any quirks before the call gates are initialised: */
-	x86_quirk_pre_intr_init();
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+	init_bsp_APIC();
+#endif
+	init_8259A(0);
 
 	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
+	 * 16 old-style INTA-cycle interrupts:
 	 */
-	for (i =  FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
-		/* SYSCALL_VECTOR was reserved in trap_init. */
-		if (i != SYSCALL_VECTOR)
-			set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+	for (i = 0; i < NR_IRQS_LEGACY; i++) {
+		struct irq_desc *desc = irq_to_desc(i);
+
+		desc->status = IRQ_DISABLED;
+		desc->action = NULL;
+		desc->depth = 1;
+
+		set_irq_chip_and_handler_name(i, &i8259A_chip,
+					      handle_level_irq, "XT");
 	}
+}
 
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
 
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
+static void __init smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 	/*
 	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
 	 * IPI, driven by wakeup.
@@ -160,16 +166,35 @@ void __init native_init_IRQ(void)
 	/* IPI for generic function call */
 	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
 
-	/* IPI for single call function */
+	/* IPI for generic single function call */
 	alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
-				 call_function_single_interrupt);
+			call_function_single_interrupt);
 
 	/* Low priority IPI to cleanup after moving an irq */
 	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 	set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+
+	/* IPI used for rebooting/stopping */
+	alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
 #endif
+#endif /* CONFIG_SMP */
+}
+
+static void __init apic_intr_init(void)
+{
+	smp_intr_init();
 
-#ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_THERMAL_VECTOR
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+#ifdef CONFIG_X86_THRESHOLD
+	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+#endif
+#if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
+	alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt);
+#endif
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 	/* self generated IPI for local APIC timer */
 	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 
@@ -179,16 +204,59 @@ void __init native_init_IRQ(void)
 	/* IPI vectors for APIC spurious and error interrupts */
 	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
 	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+	/* Performance monitoring interrupts: */
+# ifdef CONFIG_PERF_COUNTERS
+	alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
+# endif
+
 #endif
+}
 
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
-	/* thermal monitor LVT interrupt */
-	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *	Perform any necessary interrupt initialisation prior to setting up
+ *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *	interrupts should be initialised here if the machine emulates a PC
+ *	in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+#ifdef CONFIG_X86_32
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
+			return;
+	}
 #endif
+	init_ISA_irqs();
+}
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	/* Execute any quirks before the call gates are initialised: */
+	x86_quirk_pre_intr_init();
+
+	apic_intr_init();
+
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+		/* IA32_SYSCALL_VECTOR could be used in trap_init already. */
+		if (!test_bit(i, used_vectors))
+			set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+	}
 
 	if (!acpi_ioapic)
 		setup_irq(2, &irq2);
 
+#ifdef CONFIG_X86_32
 	/*
 	 * Call quirks after call gates are initialised (usually add in
 	 * the architecture specific gates):
@@ -203,4 +271,5 @@ void __init native_init_IRQ(void)
 		setup_irq(FPU_IRQ, &fpu_irq);
 
 	irq_ctx_init(smp_processor_id());
+#endif
 }
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
deleted file mode 100644
index 8cd10537fd4..00000000000
--- a/arch/x86/kernel/irqinit_64.c
+++ /dev/null
@@ -1,177 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-	[0 ... IRQ0_VECTOR - 1] = -1,
-	[IRQ0_VECTOR] = 0,
-	[IRQ1_VECTOR] = 1,
-	[IRQ2_VECTOR] = 2,
-	[IRQ3_VECTOR] = 3,
-	[IRQ4_VECTOR] = 4,
-	[IRQ5_VECTOR] = 5,
-	[IRQ6_VECTOR] = 6,
-	[IRQ7_VECTOR] = 7,
-	[IRQ8_VECTOR] = 8,
-	[IRQ9_VECTOR] = 9,
-	[IRQ10_VECTOR] = 10,
-	[IRQ11_VECTOR] = 11,
-	[IRQ12_VECTOR] = 12,
-	[IRQ13_VECTOR] = 13,
-	[IRQ14_VECTOR] = 14,
-	[IRQ15_VECTOR] = 15,
-	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (per_cpu(vector_irq, cpu)[vector] != -1)
-			return 1;
-	}
-
-	return 0;
-}
-
-static void __init init_ISA_irqs(void)
-{
-	int i;
-
-	init_bsp_APIC();
-	init_8259A(0);
-
-	for (i = 0; i < NR_IRQS_LEGACY; i++) {
-		struct irq_desc *desc = irq_to_desc(i);
-
-		desc->status = IRQ_DISABLED;
-		desc->action = NULL;
-		desc->depth = 1;
-
-		/*
-		 * 16 old-style INTA-cycle interrupts:
-		 */
-		set_irq_chip_and_handler_name(i, &i8259A_chip,
-						      handle_level_irq, "XT");
-	}
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-static void __init smp_intr_init(void)
-{
-#ifdef CONFIG_SMP
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPIs for invalidation */
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
-	/* IPI for generic function call */
-	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* IPI for generic single function call */
-	alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
-			call_function_single_interrupt);
-
-	/* Low priority IPI to cleanup after moving an irq */
-	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-	set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-}
-
-static void __init apic_intr_init(void)
-{
-	smp_intr_init();
-
-	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
-	/* self generated IPI for local APIC timer */
-	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* generic IPI for platform specific use */
-	alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-}
-
-void __init native_init_IRQ(void)
-{
-	int i;
-
-	init_ISA_irqs();
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (vector != IA32_SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
-	}
-
-	apic_intr_init();
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-}
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index eedfaebe106..8d82a77a3f3 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -88,6 +88,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_SS]	= __KERNEL_DS;
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
+	gdb_regs[GDB_SP]	= (int)&regs->sp;
 #else
 	gdb_regs[GDB_R8]	= regs->r8;
 	gdb_regs[GDB_R9]	= regs->r9;
@@ -100,8 +101,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs32[GDB_PS]	= regs->flags;
 	gdb_regs32[GDB_CS]	= regs->cs;
 	gdb_regs32[GDB_SS]	= regs->ss;
-#endif
 	gdb_regs[GDB_SP]	= regs->sp;
+#endif
 }
 
 /**
@@ -141,7 +142,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs32[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
 	gdb_regs32[GDB_CS]	= __KERNEL_CS;
 	gdb_regs32[GDB_SS]	= __KERNEL_DS;
-	gdb_regs[GDB_PC]	= p->thread.ip;
+	gdb_regs[GDB_PC]	= 0;
 	gdb_regs[GDB_R8]	= 0;
 	gdb_regs[GDB_R9]	= 0;
 	gdb_regs[GDB_R10]	= 0;
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 33019ddb56b..a78ecad0c90 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/hardirq.h>
+#include <asm/timer.h>
 
 #define MMU_QUEUE_SIZE 1024
 
@@ -195,7 +196,7 @@ static void kvm_leave_lazy_mmu(void)
 	struct kvm_para_state *state = kvm_para_state();
 
 	mmu_queue_flush(state);
-	paravirt_leave_lazy(paravirt_get_lazy_mode());
+	paravirt_leave_lazy_mmu();
 	state->mode = paravirt_get_lazy_mode();
 }
 
@@ -230,6 +231,9 @@ static void paravirt_ops_setup(void)
 		pv_mmu_ops.lazy_mode.enter = kvm_enter_lazy_mmu;
 		pv_mmu_ops.lazy_mode.leave = kvm_leave_lazy_mmu;
 	}
+#ifdef CONFIG_X86_IO_APIC
+	no_timer_check = 1;
+#endif
 }
 
 void __init kvm_guest_init(void)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 453b5795a5c..366baa17991 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -13,25 +13,13 @@
  *  Licensed under the terms of the GNU General Public
  *  License version 2. See file COPYING for details.
  */
-#include <linux/platform_device.h>
-#include <linux/capability.h>
-#include <linux/miscdevice.h>
 #include <linux/firmware.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
 #include <linux/pci_ids.h>
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/cpu.h>
 #include <linux/pci.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
 
 #include <asm/microcode.h>
 #include <asm/processor.h>
@@ -79,9 +67,6 @@ struct microcode_amd {
 #define UCODE_CONTAINER_SECTION_HDR	8
 #define UCODE_CONTAINER_HEADER_SIZE	12
 
-/* serialize access to the physical write */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
 static struct equiv_cpu_entry *equiv_cpu_table;
 
 static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
@@ -144,9 +129,8 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
 	return 1;
 }
 
-static void apply_microcode_amd(int cpu)
+static int apply_microcode_amd(int cpu)
 {
-	unsigned long flags;
 	u32 rev, dummy;
 	int cpu_num = raw_smp_processor_id();
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
@@ -156,25 +140,25 @@ static void apply_microcode_amd(int cpu)
 	BUG_ON(cpu_num != cpu);
 
 	if (mc_amd == NULL)
-		return;
+		return 0;
 
-	spin_lock_irqsave(&microcode_update_lock, flags);
 	wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc_amd->hdr.data_code);
 	/* get patch id after patching */
 	rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-	spin_unlock_irqrestore(&microcode_update_lock, flags);
 
 	/* check current patch id and patch's id for match */
 	if (rev != mc_amd->hdr.patch_id) {
 		printk(KERN_ERR "microcode: CPU%d: update failed "
 		       "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
-		return;
+		return -1;
 	}
 
 	printk(KERN_INFO "microcode: CPU%d: updated (new patch_level=0x%x)\n",
 	       cpu, rev);
 
 	uci->cpu_sig.rev = rev;
+
+	return 0;
 }
 
 static int get_ucode_data(void *to, const u8 *from, size_t n)
@@ -257,13 +241,12 @@ static int install_equiv_cpu_table(const u8 *buf)
 
 static void free_equiv_cpu_table(void)
 {
-	if (equiv_cpu_table) {
-		vfree(equiv_cpu_table);
-		equiv_cpu_table = NULL;
-	}
+	vfree(equiv_cpu_table);
+	equiv_cpu_table = NULL;
 }
 
-static int generic_load_microcode(int cpu, const u8 *data, size_t size)
+static enum ucode_state
+generic_load_microcode(int cpu, const u8 *data, size_t size)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	const u8 *ucode_ptr = data;
@@ -272,12 +255,13 @@ static int generic_load_microcode(int cpu, const u8 *data, size_t size)
 	int new_rev = uci->cpu_sig.rev;
 	unsigned int leftover;
 	unsigned long offset;
+	enum ucode_state state = UCODE_OK;
 
 	offset = install_equiv_cpu_table(ucode_ptr);
 	if (!offset) {
 		printk(KERN_ERR "microcode: failed to create "
 		       "equivalent cpu table\n");
-		return -EINVAL;
+		return UCODE_ERROR;
 	}
 
 	ucode_ptr += offset;
@@ -293,8 +277,7 @@ static int generic_load_microcode(int cpu, const u8 *data, size_t size)
 
 		mc_header = (struct microcode_header_amd *)mc;
 		if (get_matching_microcode(cpu, mc, new_rev)) {
-			if (new_mc)
-				vfree(new_mc);
+			vfree(new_mc);
 			new_rev = mc_header->patch_id;
 			new_mc  = mc;
 		} else
@@ -306,34 +289,32 @@ static int generic_load_microcode(int cpu, const u8 *data, size_t size)
 
 	if (new_mc) {
 		if (!leftover) {
-			if (uci->mc)
-				vfree(uci->mc);
+			vfree(uci->mc);
 			uci->mc = new_mc;
 			pr_debug("microcode: CPU%d found a matching microcode "
 				 "update with version 0x%x (current=0x%x)\n",
 				 cpu, new_rev, uci->cpu_sig.rev);
-		} else
+		} else {
 			vfree(new_mc);
-	}
+			state = UCODE_ERROR;
+		}
+	} else
+		state = UCODE_NFOUND;
 
 	free_equiv_cpu_table();
 
-	return (int)leftover;
+	return state;
 }
 
-static int request_microcode_fw(int cpu, struct device *device)
+static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 {
 	const char *fw_name = "amd-ucode/microcode_amd.bin";
 	const struct firmware *firmware;
-	int ret;
-
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu != raw_smp_processor_id());
+	enum ucode_state ret;
 
-	ret = request_firmware(&firmware, fw_name, device);
-	if (ret) {
+	if (request_firmware(&firmware, fw_name, device)) {
 		printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
-		return ret;
+		return UCODE_NFOUND;
 	}
 
 	ret = generic_load_microcode(cpu, firmware->data, firmware->size);
@@ -343,11 +324,12 @@ static int request_microcode_fw(int cpu, struct device *device)
 	return ret;
 }
 
-static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+static enum ucode_state
+request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
 	printk(KERN_INFO "microcode: AMD microcode update via "
 	       "/dev/cpu/microcode not supported\n");
-	return -1;
+	return UCODE_ERROR;
 }
 
 static void microcode_fini_cpu_amd(int cpu)
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 98c470c069d..9c4461501fc 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -71,27 +71,18 @@
  *		Thanks to Stuart Swales for pointing out this bug.
  */
 #include <linux/platform_device.h>
-#include <linux/capability.h>
 #include <linux/miscdevice.h>
-#include <linux/firmware.h>
+#include <linux/capability.h>
 #include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
-#include <linux/uaccess.h>
-#include <linux/vmalloc.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 
 #include <asm/microcode.h>
 #include <asm/processor.h>
-#include <asm/msr.h>
 
 MODULE_DESCRIPTION("Microcode Update Driver");
 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
@@ -101,36 +92,110 @@ MODULE_LICENSE("GPL");
 
 static struct microcode_ops	*microcode_ops;
 
-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+/*
+ * Synchronization.
+ *
+ * All non cpu-hotplug-callback call sites use:
+ *
+ * - microcode_mutex to synchronize with each other;
+ * - get/put_online_cpus() to synchronize with
+ *   the cpu-hotplug-callback call sites.
+ *
+ * We guarantee that only a single cpu is being
+ * updated at any particular moment of time.
+ */
 static DEFINE_MUTEX(microcode_mutex);
 
 struct ucode_cpu_info		ucode_cpu_info[NR_CPUS];
 EXPORT_SYMBOL_GPL(ucode_cpu_info);
 
+/*
+ * Operations that are run on a target cpu:
+ */
+
+struct cpu_info_ctx {
+	struct cpu_signature	*cpu_sig;
+	int			err;
+};
+
+static void collect_cpu_info_local(void *arg)
+{
+	struct cpu_info_ctx *ctx = arg;
+
+	ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(),
+						   ctx->cpu_sig);
+}
+
+static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig)
+{
+	struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 };
+	int ret;
+
+	ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1);
+	if (!ret)
+		ret = ctx.err;
+
+	return ret;
+}
+
+static int collect_cpu_info(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	int ret;
+
+	memset(uci, 0, sizeof(*uci));
+
+	ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig);
+	if (!ret)
+		uci->valid = 1;
+
+	return ret;
+}
+
+struct apply_microcode_ctx {
+	int err;
+};
+
+static void apply_microcode_local(void *arg)
+{
+	struct apply_microcode_ctx *ctx = arg;
+
+	ctx->err = microcode_ops->apply_microcode(smp_processor_id());
+}
+
+static int apply_microcode_on_target(int cpu)
+{
+	struct apply_microcode_ctx ctx = { .err = 0 };
+	int ret;
+
+	ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
+	if (!ret)
+		ret = ctx.err;
+
+	return ret;
+}
+
 #ifdef CONFIG_MICROCODE_OLD_INTERFACE
 static int do_microcode_update(const void __user *buf, size_t size)
 {
-	cpumask_t old;
 	int error = 0;
 	int cpu;
 
-	old = current->cpus_allowed;
-
 	for_each_online_cpu(cpu) {
 		struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+		enum ucode_state ustate;
 
 		if (!uci->valid)
 			continue;
 
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-		error = microcode_ops->request_microcode_user(cpu, buf, size);
-		if (error < 0)
-			goto out;
-		if (!error)
-			microcode_ops->apply_microcode(cpu);
+		ustate = microcode_ops->request_microcode_user(cpu, buf, size);
+		if (ustate == UCODE_ERROR) {
+			error = -1;
+			break;
+		} else if (ustate == UCODE_OK)
+			apply_microcode_on_target(cpu);
 	}
-out:
-	set_cpus_allowed_ptr(current, &old);
+
 	return error;
 }
 
@@ -143,19 +208,17 @@ static int microcode_open(struct inode *unused1, struct file *unused2)
 static ssize_t microcode_write(struct file *file, const char __user *buf,
 			       size_t len, loff_t *ppos)
 {
-	ssize_t ret;
+	ssize_t ret = -EINVAL;
 
 	if ((len >> PAGE_SHIFT) > num_physpages) {
-		printk(KERN_ERR "microcode: too much data (max %ld pages)\n",
-		       num_physpages);
-		return -EINVAL;
+		pr_err("microcode: too much data (max %ld pages)\n", num_physpages);
+		return ret;
 	}
 
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
 
-	ret = do_microcode_update(buf, len);
-	if (!ret)
+	if (do_microcode_update(buf, len) == 0)
 		ret = (ssize_t)len;
 
 	mutex_unlock(&microcode_mutex);
@@ -165,15 +228,15 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 }
 
 static const struct file_operations microcode_fops = {
-	.owner		= THIS_MODULE,
-	.write		= microcode_write,
-	.open		= microcode_open,
+	.owner			= THIS_MODULE,
+	.write			= microcode_write,
+	.open			= microcode_open,
 };
 
 static struct miscdevice microcode_dev = {
-	.minor		= MICROCODE_MINOR,
-	.name		= "microcode",
-	.fops		= &microcode_fops,
+	.minor			= MICROCODE_MINOR,
+	.name			= "microcode",
+	.fops			= &microcode_fops,
 };
 
 static int __init microcode_dev_init(void)
@@ -182,9 +245,7 @@ static int __init microcode_dev_init(void)
 
 	error = misc_register(&microcode_dev);
 	if (error) {
-		printk(KERN_ERR
-			"microcode: can't misc_register on minor=%d\n",
-			MICROCODE_MINOR);
+		pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR);
 		return error;
 	}
 
@@ -205,42 +266,51 @@ MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
 /* fake device for request_firmware */
 static struct platform_device	*microcode_pdev;
 
-static long reload_for_cpu(void *unused)
+static int reload_for_cpu(int cpu)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id();
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	int err = 0;
 
 	mutex_lock(&microcode_mutex);
 	if (uci->valid) {
-		err = microcode_ops->request_microcode_fw(smp_processor_id(),
-							  &microcode_pdev->dev);
-		if (!err)
-			microcode_ops->apply_microcode(smp_processor_id());
+		enum ucode_state ustate;
+
+		ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
+		if (ustate == UCODE_OK)
+			apply_microcode_on_target(cpu);
+		else
+			if (ustate == UCODE_ERROR)
+				err = -EINVAL;
 	}
 	mutex_unlock(&microcode_mutex);
+
 	return err;
 }
 
 static ssize_t reload_store(struct sys_device *dev,
 			    struct sysdev_attribute *attr,
-			    const char *buf, size_t sz)
+			    const char *buf, size_t size)
 {
-	char *end;
-	unsigned long val = simple_strtoul(buf, &end, 0);
-	int err = 0;
+	unsigned long val;
 	int cpu = dev->id;
+	int ret = 0;
+	char *end;
 
+	val = simple_strtoul(buf, &end, 0);
 	if (end == buf)
 		return -EINVAL;
+
 	if (val == 1) {
 		get_online_cpus();
 		if (cpu_online(cpu))
-			err = work_on_cpu(cpu, reload_for_cpu, NULL);
+			ret = reload_for_cpu(cpu);
 		put_online_cpus();
 	}
-	if (err)
-		return err;
-	return sz;
+
+	if (!ret)
+		ret = size;
+
+	return ret;
 }
 
 static ssize_t version_show(struct sys_device *dev,
@@ -271,11 +341,11 @@ static struct attribute *mc_default_attrs[] = {
 };
 
 static struct attribute_group mc_attr_group = {
-	.attrs		= mc_default_attrs,
-	.name		= "microcode",
+	.attrs			= mc_default_attrs,
+	.name			= "microcode",
 };
 
-static void __microcode_fini_cpu(int cpu)
+static void microcode_fini_cpu(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
@@ -283,103 +353,68 @@ static void __microcode_fini_cpu(int cpu)
 	uci->valid = 0;
 }
 
-static void microcode_fini_cpu(int cpu)
-{
-	mutex_lock(&microcode_mutex);
-	__microcode_fini_cpu(cpu);
-	mutex_unlock(&microcode_mutex);
-}
-
-static void collect_cpu_info(int cpu)
+static enum ucode_state microcode_resume_cpu(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
-	memset(uci, 0, sizeof(*uci));
-	if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig))
-		uci->valid = 1;
+	if (!uci->mc)
+		return UCODE_NFOUND;
+
+	pr_debug("microcode: CPU%d updated upon resume\n", cpu);
+	apply_microcode_on_target(cpu);
+
+	return UCODE_OK;
 }
 
-static int microcode_resume_cpu(int cpu)
+static enum ucode_state microcode_init_cpu(int cpu)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	struct cpu_signature nsig;
+	enum ucode_state ustate;
 
-	pr_debug("microcode: CPU%d resumed\n", cpu);
+	if (collect_cpu_info(cpu))
+		return UCODE_ERROR;
 
-	if (!uci->mc)
-		return 1;
+	/* --dimm. Trigger a delayed update? */
+	if (system_state != SYSTEM_RUNNING)
+		return UCODE_NFOUND;
 
-	/*
-	 * Let's verify that the 'cached' ucode does belong
-	 * to this cpu (a bit of paranoia):
-	 */
-	if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
-		__microcode_fini_cpu(cpu);
-		printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
-				cpu);
-		return -1;
-	}
+	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
 
-	if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
-		__microcode_fini_cpu(cpu);
-		printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
-				cpu);
-		/* Should we look for a new ucode here? */
-		return 1;
+	if (ustate == UCODE_OK) {
+		pr_debug("microcode: CPU%d updated upon init\n", cpu);
+		apply_microcode_on_target(cpu);
 	}
 
-	return 0;
+	return ustate;
 }
 
-static long microcode_update_cpu(void *unused)
+static enum ucode_state microcode_update_cpu(int cpu)
 {
-	struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id();
-	int err = 0;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	enum ucode_state ustate;
 
-	/*
-	 * Check if the system resume is in progress (uci->valid != NULL),
-	 * otherwise just request a firmware:
-	 */
-	if (uci->valid) {
-		err = microcode_resume_cpu(smp_processor_id());
-	} else {
-		collect_cpu_info(smp_processor_id());
-		if (uci->valid && system_state == SYSTEM_RUNNING)
-			err = microcode_ops->request_microcode_fw(
-					smp_processor_id(),
-					&microcode_pdev->dev);
-	}
-	if (!err)
-		microcode_ops->apply_microcode(smp_processor_id());
-	return err;
-}
+	if (uci->valid)
+		ustate = microcode_resume_cpu(cpu);
+	else
+		ustate = microcode_init_cpu(cpu);
 
-static int microcode_init_cpu(int cpu)
-{
-	int err;
-	mutex_lock(&microcode_mutex);
-	err = work_on_cpu(cpu, microcode_update_cpu, NULL);
-	mutex_unlock(&microcode_mutex);
-
-	return err;
+	return ustate;
 }
 
 static int mc_sysdev_add(struct sys_device *sys_dev)
 {
 	int err, cpu = sys_dev->id;
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 	if (!cpu_online(cpu))
 		return 0;
 
 	pr_debug("microcode: CPU%d added\n", cpu);
-	memset(uci, 0, sizeof(*uci));
 
 	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
 	if (err)
 		return err;
 
-	err = microcode_init_cpu(cpu);
+	if (microcode_init_cpu(cpu) == UCODE_ERROR)
+		err = -EINVAL;
 
 	return err;
 }
@@ -400,19 +435,30 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
 static int mc_sysdev_resume(struct sys_device *dev)
 {
 	int cpu = dev->id;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 	if (!cpu_online(cpu))
 		return 0;
 
-	/* only CPU 0 will apply ucode here */
-	microcode_update_cpu(NULL);
+	/*
+	 * All non-bootup cpus are still disabled,
+	 * so only CPU 0 will apply ucode here.
+	 *
+	 * Moreover, there can be no concurrent
+	 * updates from any other places at this point.
+	 */
+	WARN_ON(cpu != 0);
+
+	if (uci->valid && uci->mc)
+		microcode_ops->apply_microcode(cpu);
+
 	return 0;
 }
 
 static struct sysdev_driver mc_sysdev_driver = {
-	.add		= mc_sysdev_add,
-	.remove		= mc_sysdev_remove,
-	.resume		= mc_sysdev_resume,
+	.add			= mc_sysdev_add,
+	.remove			= mc_sysdev_remove,
+	.resume			= mc_sysdev_resume,
 };
 
 static __cpuinit int
@@ -425,15 +471,12 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		if (microcode_init_cpu(cpu))
-			printk(KERN_ERR "microcode: failed to init CPU%d\n",
-			       cpu);
+		microcode_update_cpu(cpu);
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
 		pr_debug("microcode: CPU%d added\n", cpu);
 		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			printk(KERN_ERR "microcode: Failed to create the sysfs "
-				"group for CPU%d\n", cpu);
+			pr_err("microcode: Failed to create group for CPU%d\n", cpu);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
@@ -465,13 +508,10 @@ static int __init microcode_init(void)
 		microcode_ops = init_amd_microcode();
 
 	if (!microcode_ops) {
-		printk(KERN_ERR "microcode: no support for this CPU vendor\n");
+		pr_err("microcode: no support for this CPU vendor\n");
 		return -ENODEV;
 	}
 
-	error = microcode_dev_init();
-	if (error)
-		return error;
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);
 	if (IS_ERR(microcode_pdev)) {
@@ -480,23 +520,31 @@ static int __init microcode_init(void)
 	}
 
 	get_online_cpus();
+	mutex_lock(&microcode_mutex);
+
 	error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+
+	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
+
 	if (error) {
-		microcode_dev_exit();
 		platform_device_unregister(microcode_pdev);
 		return error;
 	}
 
+	error = microcode_dev_init();
+	if (error)
+		return error;
+
 	register_hotcpu_notifier(&mc_cpu_notifier);
 
-	printk(KERN_INFO
-	       "Microcode Update Driver: v" MICROCODE_VERSION
+	pr_info("Microcode Update Driver: v" MICROCODE_VERSION
 	       " <tigran@aivazian.fsnet.co.uk>,"
 	       " Peter Oruba\n");
 
 	return 0;
 }
+module_init(microcode_init);
 
 static void __exit microcode_exit(void)
 {
@@ -505,16 +553,17 @@ static void __exit microcode_exit(void)
 	unregister_hotcpu_notifier(&mc_cpu_notifier);
 
 	get_online_cpus();
+	mutex_lock(&microcode_mutex);
+
 	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+
+	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
 
 	platform_device_unregister(microcode_pdev);
 
 	microcode_ops = NULL;
 
-	printk(KERN_INFO
-	       "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+	pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
 }
-
-module_init(microcode_init);
 module_exit(microcode_exit);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 149b9ec7c1a..0d334ddd0a9 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -70,24 +70,11 @@
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
  *		Thanks to Stuart Swales for pointing out this bug.
  */
-#include <linux/platform_device.h>
-#include <linux/capability.h>
-#include <linux/miscdevice.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
 #include <linux/uaccess.h>
-#include <linux/vmalloc.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/cpu.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
+#include <linux/vmalloc.h>
 
 #include <asm/microcode.h>
 #include <asm/processor.h>
@@ -150,13 +137,9 @@ struct extended_sigtable {
 
 #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
 
-/* serialize access to the physical write to MSR 0x79 */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
-	unsigned long flags;
 	unsigned int val[2];
 
 	memset(csig, 0, sizeof(*csig));
@@ -176,18 +159,14 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 		csig->pf = 1 << ((val[1] >> 18) & 7);
 	}
 
-	/* serialize access to the physical write to MSR 0x79 */
-	spin_lock_irqsave(&microcode_update_lock, flags);
-
 	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
 	/* see notes above for revision 1.07.  Apparent chip bug */
 	sync_core();
 	/* get the current revision from MSR 0x8B */
 	rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
-	spin_unlock_irqrestore(&microcode_update_lock, flags);
 
-	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
-			csig->sig, csig->pf, csig->rev);
+	printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
+			cpu_num, csig->sig, csig->pf, csig->rev);
 
 	return 0;
 }
@@ -318,11 +297,10 @@ get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
 	return 0;
 }
 
-static void apply_microcode(int cpu)
+static int apply_microcode(int cpu)
 {
 	struct microcode_intel *mc_intel;
 	struct ucode_cpu_info *uci;
-	unsigned long flags;
 	unsigned int val[2];
 	int cpu_num;
 
@@ -334,10 +312,7 @@ static void apply_microcode(int cpu)
 	BUG_ON(cpu_num != cpu);
 
 	if (mc_intel == NULL)
-		return;
-
-	/* serialize access to the physical write to MSR 0x79 */
-	spin_lock_irqsave(&microcode_update_lock, flags);
+		return 0;
 
 	/* write microcode via MSR 0x79 */
 	wrmsr(MSR_IA32_UCODE_WRITE,
@@ -351,30 +326,32 @@ static void apply_microcode(int cpu)
 	/* get the current revision from MSR 0x8B */
 	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
 
-	spin_unlock_irqrestore(&microcode_update_lock, flags);
 	if (val[1] != mc_intel->hdr.rev) {
-		printk(KERN_ERR "microcode: CPU%d update from revision "
-				"0x%x to 0x%x failed\n",
-			cpu_num, uci->cpu_sig.rev, val[1]);
-		return;
+		printk(KERN_ERR "microcode: CPU%d update "
+				"to revision 0x%x failed\n",
+			cpu_num, mc_intel->hdr.rev);
+		return -1;
 	}
-	printk(KERN_INFO "microcode: CPU%d updated from revision "
-			 "0x%x to 0x%x, date = %04x-%02x-%02x \n",
-		cpu_num, uci->cpu_sig.rev, val[1],
+	printk(KERN_INFO "microcode: CPU%d updated to revision "
+			 "0x%x, date = %04x-%02x-%02x \n",
+		cpu_num, val[1],
 		mc_intel->hdr.date & 0xffff,
 		mc_intel->hdr.date >> 24,
 		(mc_intel->hdr.date >> 16) & 0xff);
 
 	uci->cpu_sig.rev = val[1];
+
+	return 0;
 }
 
-static int generic_load_microcode(int cpu, void *data, size_t size,
-		int (*get_ucode_data)(void *, const void *, size_t))
+static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
+				int (*get_ucode_data)(void *, const void *, size_t))
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	u8 *ucode_ptr = data, *new_mc = NULL, *mc;
 	int new_rev = uci->cpu_sig.rev;
 	unsigned int leftover = size;
+	enum ucode_state state = UCODE_OK;
 
 	while (leftover) {
 		struct microcode_header_intel mc_header;
@@ -412,11 +389,15 @@ static int generic_load_microcode(int cpu, void *data, size_t size,
 		leftover  -= mc_size;
 	}
 
-	if (!new_mc)
+	if (leftover) {
+		if (new_mc)
+			vfree(new_mc);
+		state = UCODE_ERROR;
 		goto out;
+	}
 
-	if (leftover) {
-		vfree(new_mc);
+	if (!new_mc) {
+		state = UCODE_NFOUND;
 		goto out;
 	}
 
@@ -427,9 +408,8 @@ static int generic_load_microcode(int cpu, void *data, size_t size,
 	pr_debug("microcode: CPU%d found a matching microcode update with"
 		 " version 0x%x (current=0x%x)\n",
 			cpu, new_rev, uci->cpu_sig.rev);
-
- out:
-	return (int)leftover;
+out:
+	return state;
 }
 
 static int get_ucode_fw(void *to, const void *from, size_t n)
@@ -438,21 +418,19 @@ static int get_ucode_fw(void *to, const void *from, size_t n)
 	return 0;
 }
 
-static int request_microcode_fw(int cpu, struct device *device)
+static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 {
 	char name[30];
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	const struct firmware *firmware;
-	int ret;
+	enum ucode_state ret;
 
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu != raw_smp_processor_id());
 	sprintf(name, "intel-ucode/%02x-%02x-%02x",
 		c->x86, c->x86_model, c->x86_mask);
-	ret = request_firmware(&firmware, name, device);
-	if (ret) {
+
+	if (request_firmware(&firmware, name, device)) {
 		pr_debug("microcode: data file %s load failed\n", name);
-		return ret;
+		return UCODE_NFOUND;
 	}
 
 	ret = generic_load_microcode(cpu, (void *)firmware->data,
@@ -468,11 +446,9 @@ static int get_ucode_user(void *to, const void *from, size_t n)
 	return copy_from_user(to, from, n);
 }
 
-static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+static enum ucode_state
+request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu != raw_smp_processor_id());
-
 	return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
 }
 
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module.c
index c23880b90b5..89f386f044e 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module.c
@@ -1,6 +1,5 @@
-/*  Kernel module help for x86-64
+/*  Kernel module help for x86.
     Copyright (C) 2001 Rusty Russell.
-    Copyright (C) 2002,2003 Andi Kleen, SuSE Labs.
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -22,23 +21,18 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/bug.h>
+#include <linux/mm.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 
+#if 0
+#define DEBUGP printk
+#else
 #define DEBUGP(fmt...)
-
-#ifndef CONFIG_UML
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
-}
+#endif
 
 void *module_alloc(unsigned long size)
 {
@@ -54,9 +48,15 @@ void *module_alloc(unsigned long size)
 	if (!area)
 		return NULL;
 
-	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
+	return __vmalloc_area(area, GFP_KERNEL | __GFP_HIGHMEM,
+					PAGE_KERNEL_EXEC);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
 }
-#endif
 
 /* We don't need anything special. */
 int module_frob_arch_sections(Elf_Ehdr *hdr,
@@ -67,6 +67,58 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 	return 0;
 }
 
+#ifdef CONFIG_X86_32
+int apply_relocate(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	unsigned int i;
+	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_386_32:
+			/* We add the value into the location given */
+			*location += sym->st_value;
+			break;
+		case R_386_PC32:
+			/* Add the value, subtract its postition */
+			*location += sym->st_value - (uint32_t)location;
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+	       me->name);
+	return -ENOEXEC;
+}
+#else /*X86_64*/
 int apply_relocate_add(Elf64_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -147,6 +199,8 @@ int apply_relocate(Elf_Shdr *sechdrs,
 	return -ENOSYS;
 }
 
+#endif
+
 int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
diff --git a/arch/x86/kernel/module_32.c b/arch/x86/kernel/module_32.c
deleted file mode 100644
index 0edd819050e..00000000000
--- a/arch/x86/kernel/module_32.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*  Kernel module help for i386.
-    Copyright (C) 2001 Rusty Russell.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc_exec(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
-}
-
-/* We don't need anything special. */
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	unsigned int i;
-	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rel[i].r_info);
-
-		switch (ELF32_R_TYPE(rel[i].r_info)) {
-		case R_386_32:
-			/* We add the value into the location given */
-			*location += sym->st_value;
-			break;
-		case R_386_PC32:
-			/* Add the value, subtract its postition */
-			*location += sym->st_value - (uint32_t)location;
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       me->name, ELF32_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
-		*para = NULL;
-	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
-	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
-		if (!strcmp(".text", secstrings + s->sh_name))
-			text = s;
-		if (!strcmp(".altinstructions", secstrings + s->sh_name))
-			alt = s;
-		if (!strcmp(".smp_locks", secstrings + s->sh_name))
-			locks = s;
-		if (!strcmp(".parainstructions", secstrings + s->sh_name))
-			para = s;
-	}
-
-	if (alt) {
-		/* patch .altinstructions */
-		void *aseg = (void *)alt->sh_addr;
-		apply_alternatives(aseg, aseg + alt->sh_size);
-	}
-	if (locks && text) {
-		void *lseg = (void *)locks->sh_addr;
-		void *tseg = (void *)text->sh_addr;
-		alternatives_smp_module_add(me, me->name,
-					    lseg, lseg + locks->sh_size,
-					    tseg, tseg + text->sh_size);
-	}
-
-	if (para) {
-		void *pseg = (void *)para->sh_addr;
-		apply_paravirt(pseg, pseg + para->sh_size);
-	}
-
-	return module_bug_finalize(hdr, sechdrs, me);
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	alternatives_smp_module_del(mod);
-	module_bug_cleanup(mod);
-}
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 70fd7e414c1..651c93b2886 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -17,6 +17,7 @@
 #include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/smp.h>
+#include <linux/pci.h>
 
 #include <asm/mtrr.h>
 #include <asm/mpspec.h>
@@ -870,24 +871,17 @@ static
 inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
 #endif /* CONFIG_X86_IO_APIC */
 
-static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
-		      int count)
+static int
+check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
 {
-	if (!mpc_new_phys) {
-		pr_info("No spare slots, try to append...take your risk, "
-			"new mpc_length %x\n", count);
-	} else {
-		if (count <= mpc_new_length)
-			pr_info("No spare slots, try to append..., "
-				"new mpc_length %x\n", count);
-		else {
-			pr_err("mpc_new_length %lx is too small\n",
-				mpc_new_length);
-			return -1;
-		}
+	int ret = 0;
+
+	if (!mpc_new_phys || count <= mpc_new_length) {
+		WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
+		return -1;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int  __init replace_intsrc_all(struct mpc_table *mpc,
@@ -946,7 +940,7 @@ static int  __init replace_intsrc_all(struct mpc_table *mpc,
 		} else {
 			struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
 			count += sizeof(struct mpc_intsrc);
-			if (!check_slot(mpc_new_phys, mpc_new_length, count))
+			if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
 				goto out;
 			assign_to_mpc_intsrc(&mp_irqs[i], m);
 			mpc->length = count;
@@ -963,11 +957,14 @@ out:
 	return 0;
 }
 
-static int __initdata enable_update_mptable;
+int enable_update_mptable;
 
 static int __init update_mptable_setup(char *str)
 {
 	enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+	pci_routeirq = 1;
+#endif
 	return 0;
 }
 early_param("update_mptable", update_mptable_setup);
@@ -980,6 +977,9 @@ static int __initdata alloc_mptable;
 static int __init parse_alloc_mptable_opt(char *p)
 {
 	enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+	pci_routeirq = 1;
+#endif
 	alloc_mptable = 1;
 	if (!p)
 		return 0;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 8e45f446488..70ec9b951d7 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -134,7 +134,9 @@ static void *get_call_destination(u8 type)
 		.pv_irq_ops = pv_irq_ops,
 		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
 		.pv_lock_ops = pv_lock_ops,
+#endif
 	};
 	return *((void **)&tmpl + type);
 }
@@ -246,18 +248,16 @@ static DEFINE_PER_CPU(enum paravirt_lazy_mode, paravirt_lazy_mode) = PARAVIRT_LA
 
 static inline void enter_lazy(enum paravirt_lazy_mode mode)
 {
-	BUG_ON(__get_cpu_var(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
-	BUG_ON(preemptible());
+	BUG_ON(percpu_read(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
 
-	__get_cpu_var(paravirt_lazy_mode) = mode;
+	percpu_write(paravirt_lazy_mode, mode);
 }
 
-void paravirt_leave_lazy(enum paravirt_lazy_mode mode)
+static void leave_lazy(enum paravirt_lazy_mode mode)
 {
-	BUG_ON(__get_cpu_var(paravirt_lazy_mode) != mode);
-	BUG_ON(preemptible());
+	BUG_ON(percpu_read(paravirt_lazy_mode) != mode);
 
-	__get_cpu_var(paravirt_lazy_mode) = PARAVIRT_LAZY_NONE;
+	percpu_write(paravirt_lazy_mode, PARAVIRT_LAZY_NONE);
 }
 
 void paravirt_enter_lazy_mmu(void)
@@ -267,22 +267,36 @@ void paravirt_enter_lazy_mmu(void)
 
 void paravirt_leave_lazy_mmu(void)
 {
-	paravirt_leave_lazy(PARAVIRT_LAZY_MMU);
+	leave_lazy(PARAVIRT_LAZY_MMU);
 }
 
-void paravirt_enter_lazy_cpu(void)
+void paravirt_start_context_switch(struct task_struct *prev)
 {
+	BUG_ON(preemptible());
+
+	if (percpu_read(paravirt_lazy_mode) == PARAVIRT_LAZY_MMU) {
+		arch_leave_lazy_mmu_mode();
+		set_ti_thread_flag(task_thread_info(prev), TIF_LAZY_MMU_UPDATES);
+	}
 	enter_lazy(PARAVIRT_LAZY_CPU);
 }
 
-void paravirt_leave_lazy_cpu(void)
+void paravirt_end_context_switch(struct task_struct *next)
 {
-	paravirt_leave_lazy(PARAVIRT_LAZY_CPU);
+	BUG_ON(preemptible());
+
+	leave_lazy(PARAVIRT_LAZY_CPU);
+
+	if (test_and_clear_ti_thread_flag(task_thread_info(next), TIF_LAZY_MMU_UPDATES))
+		arch_enter_lazy_mmu_mode();
 }
 
 enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 {
-	return __get_cpu_var(paravirt_lazy_mode);
+	if (in_interrupt())
+		return PARAVIRT_LAZY_NONE;
+
+	return percpu_read(paravirt_lazy_mode);
 }
 
 void arch_flush_lazy_mmu_mode(void)
@@ -290,7 +304,6 @@ void arch_flush_lazy_mmu_mode(void)
 	preempt_disable();
 
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
-		WARN_ON(preempt_count() == 1);
 		arch_leave_lazy_mmu_mode();
 		arch_enter_lazy_mmu_mode();
 	}
@@ -298,19 +311,6 @@ void arch_flush_lazy_mmu_mode(void)
 	preempt_enable();
 }
 
-void arch_flush_lazy_cpu_mode(void)
-{
-	preempt_disable();
-
-	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
-		WARN_ON(preempt_count() == 1);
-		arch_leave_lazy_cpu_mode();
-		arch_enter_lazy_cpu_mode();
-	}
-
-	preempt_enable();
-}
-
 struct pv_info pv_info = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -402,10 +402,8 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.set_iopl_mask = native_set_iopl_mask,
 	.io_delay = native_io_delay,
 
-	.lazy_mode = {
-		.enter = paravirt_nop,
-		.leave = paravirt_nop,
-	},
+	.start_context_switch = paravirt_nop,
+	.end_context_switch = paravirt_nop,
 };
 
 struct pv_apic_ops pv_apic_ops = {
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 755c21e906f..971a3bec47a 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -186,37 +186,6 @@ static struct cal_chipset_ops calioc2_chip_ops = {
 
 static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
 
-/* enable this to stress test the chip's TCE cache */
-#ifdef CONFIG_IOMMU_DEBUG
-static int debugging = 1;
-
-static inline unsigned long verify_bit_range(unsigned long* bitmap,
-	int expected, unsigned long start, unsigned long end)
-{
-	unsigned long idx = start;
-
-	BUG_ON(start >= end);
-
-	while (idx < end) {
-		if (!!test_bit(idx, bitmap) != expected)
-			return idx;
-		++idx;
-	}
-
-	/* all bits have the expected value */
-	return ~0UL;
-}
-#else /* debugging is disabled */
-static int debugging;
-
-static inline unsigned long verify_bit_range(unsigned long* bitmap,
-	int expected, unsigned long start, unsigned long end)
-{
-	return ~0UL;
-}
-
-#endif /* CONFIG_IOMMU_DEBUG */
-
 static inline int translation_enabled(struct iommu_table *tbl)
 {
 	/* only PHBs with translation enabled have an IOMMU table */
@@ -228,7 +197,6 @@ static void iommu_range_reserve(struct iommu_table *tbl,
 {
 	unsigned long index;
 	unsigned long end;
-	unsigned long badbit;
 	unsigned long flags;
 
 	index = start_addr >> PAGE_SHIFT;
@@ -243,14 +211,6 @@ static void iommu_range_reserve(struct iommu_table *tbl,
 
 	spin_lock_irqsave(&tbl->it_lock, flags);
 
-	badbit = verify_bit_range(tbl->it_map, 0, index, end);
-	if (badbit != ~0UL) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "Calgary: entry already allocated at "
-			       "0x%lx tbl %p dma 0x%lx npages %u\n",
-			       badbit, tbl, start_addr, npages);
-	}
-
 	iommu_area_reserve(tbl->it_map, index, npages);
 
 	spin_unlock_irqrestore(&tbl->it_lock, flags);
@@ -326,7 +286,6 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	unsigned int npages)
 {
 	unsigned long entry;
-	unsigned long badbit;
 	unsigned long badend;
 	unsigned long flags;
 
@@ -346,14 +305,6 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 
 	spin_lock_irqsave(&tbl->it_lock, flags);
 
-	badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages);
-	if (badbit != ~0UL) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "Calgary: bit is off at 0x%lx "
-			       "tbl %p dma 0x%Lx entry 0x%lx npages %u\n",
-			       badbit, tbl, dma_addr, entry, npages);
-	}
-
 	iommu_area_free(tbl->it_map, entry, npages);
 
 	spin_unlock_irqrestore(&tbl->it_lock, flags);
@@ -1488,9 +1439,8 @@ void __init detect_calgary(void)
 		iommu_detected = 1;
 		calgary_detected = 1;
 		printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n");
-		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
-		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
-		       debugging ? "enabled" : "disabled");
+		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d\n",
+		       specified_table_size);
 
 		/* swiotlb for devices that aren't behind the Calgary. */
 		if (max_pfn > MAX_DMA32_PFN)
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index b284b58c035..cfd9f906389 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -144,48 +144,21 @@ static void flush_gart(void)
 }
 
 #ifdef CONFIG_IOMMU_LEAK
-
-#define SET_LEAK(x)							\
-	do {								\
-		if (iommu_leak_tab)					\
-			iommu_leak_tab[x] = __builtin_return_address(0);\
-	} while (0)
-
-#define CLEAR_LEAK(x)							\
-	do {								\
-		if (iommu_leak_tab)					\
-			iommu_leak_tab[x] = NULL;			\
-	} while (0)
-
 /* Debugging aid for drivers that don't free their IOMMU tables */
-static void **iommu_leak_tab;
 static int leak_trace;
 static int iommu_leak_pages = 20;
 
 static void dump_leak(void)
 {
-	int i;
 	static int dump;
 
-	if (dump || !iommu_leak_tab)
+	if (dump)
 		return;
 	dump = 1;
-	show_stack(NULL, NULL);
 
-	/* Very crude. dump some from the end of the table too */
-	printk(KERN_DEBUG "Dumping %d pages from end of IOMMU:\n",
-	       iommu_leak_pages);
-	for (i = 0; i < iommu_leak_pages; i += 2) {
-		printk(KERN_DEBUG "%lu: ", iommu_pages-i);
-		printk_address((unsigned long) iommu_leak_tab[iommu_pages-i],
-				0);
-		printk(KERN_CONT "%c", (i+1)%2 == 0 ? '\n' : ' ');
-	}
-	printk(KERN_DEBUG "\n");
+	show_stack(NULL, NULL);
+	debug_dma_dump_mappings(NULL);
 }
-#else
-# define SET_LEAK(x)
-# define CLEAR_LEAK(x)
 #endif
 
 static void iommu_full(struct device *dev, size_t size, int dir)
@@ -248,7 +221,6 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem);
-		SET_LEAK(iommu_page + i);
 		phys_mem += PAGE_SIZE;
 	}
 	return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK);
@@ -294,7 +266,6 @@ static void gart_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
-		CLEAR_LEAK(iommu_page + i);
 	}
 	free_iommu(iommu_page, npages);
 }
@@ -377,7 +348,6 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		pages = iommu_num_pages(s->offset, s->length, PAGE_SIZE);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
-			SET_LEAK(iommu_page);
 			addr += PAGE_SIZE;
 			iommu_page++;
 		}
@@ -688,8 +658,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 	agp_gatt_table = gatt;
 
-	enable_gart_translations();
-
 	error = sysdev_class_register(&gart_sysdev_class);
 	if (!error)
 		error = sysdev_register(&device_gart);
@@ -801,11 +769,12 @@ void __init gart_iommu_init(void)
 
 #ifdef CONFIG_IOMMU_LEAK
 	if (leak_trace) {
-		iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL|__GFP_ZERO,
-				  get_order(iommu_pages*sizeof(void *)));
-		if (!iommu_leak_tab)
+		int ret;
+
+		ret = dma_debug_resize_entries(iommu_pages);
+		if (ret)
 			printk(KERN_DEBUG
-			       "PCI-DMA: Cannot allocate leak trace area\n");
+			       "PCI-DMA: Cannot trace all the entries\n");
 	}
 #endif
 
@@ -845,6 +814,14 @@ void __init gart_iommu_init(void)
 	 * the pages as Not-Present:
 	 */
 	wbinvd();
+	
+	/*
+	 * Now all caches are flushed and we can safely enable
+	 * GART hardware.  Doing it early leaves the possibility
+	 * of stale cache entries that can lead to GART PTE
+	 * errors.
+	 */
+	enable_gart_translations();
 
 	/*
 	 * Try to workaround a bug (thanks to BenH):
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 221a3853e26..a1712f2b50f 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -28,7 +28,7 @@ dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 	return paddr;
 }
 
-phys_addr_t swiotlb_bus_to_phys(dma_addr_t baddr)
+phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 {
 	return baddr;
 }
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ca989158e84..3bb2be1649b 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -8,12 +8,15 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/clockchips.h>
+#include <linux/random.h>
 #include <trace/power.h>
 #include <asm/system.h>
 #include <asm/apic.h>
+#include <asm/syscalls.h>
 #include <asm/idle.h>
 #include <asm/uaccess.h>
 #include <asm/i387.h>
+#include <asm/ds.h>
 
 unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
@@ -45,6 +48,8 @@ void free_thread_xstate(struct task_struct *tsk)
 		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
 		tsk->thread.xstate = NULL;
 	}
+
+	WARN(tsk->thread.ds_ctx, "leaking DS context\n");
 }
 
 void free_thread_info(struct thread_info *ti)
@@ -83,8 +88,6 @@ void exit_thread(void)
 		put_cpu();
 		kfree(bp);
 	}
-
-	ds_exit_thread(current);
 }
 
 void flush_thread(void)
@@ -613,3 +616,16 @@ static int __init idle_setup(char *str)
 }
 early_param("idle", idle_setup);
 
+unsigned long arch_align_stack(unsigned long sp)
+{
+	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+		sp -= get_random_int() % 8192;
+	return sp & ~0xf;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long range_end = mm->brk + 0x02000000;
+	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
+
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 76f8f84043a..59f4524984a 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -9,8 +9,6 @@
  * This file handles the architecture-dependent parts of process handling..
  */
 
-#include <stdarg.h>
-
 #include <linux/stackprotector.h>
 #include <linux/cpu.h>
 #include <linux/errno.h>
@@ -33,7 +31,6 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/ptrace.h>
-#include <linux/random.h>
 #include <linux/personality.h>
 #include <linux/tick.h>
 #include <linux/percpu.h>
@@ -290,7 +287,8 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		p->thread.io_bitmap_max = 0;
 	}
 
-	ds_copy_thread(p, current);
+	clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
+	p->thread.ds_ctx = NULL;
 
 	clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR);
 	p->thread.debugctlmsr = 0;
@@ -407,7 +405,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * done before math_state_restore, so the TS bit is up
 	 * to date.
 	 */
-	arch_leave_lazy_cpu_mode();
+	arch_end_context_switch(next_p);
 
 	/* If the task has used fpu the last 5 timeslices, just do a full
 	 * restore of the math state immediately to avoid the trap; the
@@ -497,15 +495,3 @@ unsigned long get_wchan(struct task_struct *p)
 	return 0;
 }
 
-unsigned long arch_align_stack(unsigned long sp)
-{
-	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
-		sp -= get_random_int() % 8192;
-	return sp & ~0xf;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
-}
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b751a41392b..ebefb5407b9 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -14,8 +14,6 @@
  * This file handles the architecture-dependent parts of process handling..
  */
 
-#include <stdarg.h>
-
 #include <linux/stackprotector.h>
 #include <linux/cpu.h>
 #include <linux/errno.h>
@@ -32,7 +30,6 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
-#include <linux/random.h>
 #include <linux/notifier.h>
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
@@ -335,7 +332,8 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 			goto out;
 	}
 
-	ds_copy_thread(p, me);
+	clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
+	p->thread.ds_ctx = NULL;
 
 	clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR);
 	p->thread.debugctlmsr = 0;
@@ -428,7 +426,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * done before math_state_restore, so the TS bit is up
 	 * to date.
 	 */
-	arch_leave_lazy_cpu_mode();
+	arch_end_context_switch(next_p);
 
 	/*
 	 * Switch FS and GS.
@@ -660,15 +658,3 @@ long sys_arch_prctl(int code, unsigned long addr)
 	return do_arch_prctl(current, code, addr);
 }
 
-unsigned long arch_align_stack(unsigned long sp)
-{
-	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
-		sp -= get_random_int() % 8192;
-	return sp & ~0xf;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
-}
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 23b7c8f017e..09ecbde91c1 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/audit.h>
 #include <linux/seccomp.h>
 #include <linux/signal.h>
+#include <linux/workqueue.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -578,17 +579,130 @@ static int ioperm_get(struct task_struct *target,
 }
 
 #ifdef CONFIG_X86_PTRACE_BTS
+/*
+ * A branch trace store context.
+ *
+ * Contexts may only be installed by ptrace_bts_config() and only for
+ * ptraced tasks.
+ *
+ * Contexts are destroyed when the tracee is detached from the tracer.
+ * The actual destruction work requires interrupts enabled, so the
+ * work is deferred and will be scheduled during __ptrace_unlink().
+ *
+ * Contexts hold an additional task_struct reference on the traced
+ * task, as well as a reference on the tracer's mm.
+ *
+ * Ptrace already holds a task_struct for the duration of ptrace operations,
+ * but since destruction is deferred, it may be executed after both
+ * tracer and tracee exited.
+ */
+struct bts_context {
+	/* The branch trace handle. */
+	struct bts_tracer	*tracer;
+
+	/* The buffer used to store the branch trace and its size. */
+	void			*buffer;
+	unsigned int		size;
+
+	/* The mm that paid for the above buffer. */
+	struct mm_struct	*mm;
+
+	/* The task this context belongs to. */
+	struct task_struct	*task;
+
+	/* The signal to send on a bts buffer overflow. */
+	unsigned int		bts_ovfl_signal;
+
+	/* The work struct to destroy a context. */
+	struct work_struct	work;
+};
+
+static int alloc_bts_buffer(struct bts_context *context, unsigned int size)
+{
+	void *buffer = NULL;
+	int err = -ENOMEM;
+
+	err = account_locked_memory(current->mm, current->signal->rlim, size);
+	if (err < 0)
+		return err;
+
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!buffer)
+		goto out_refund;
+
+	context->buffer = buffer;
+	context->size = size;
+	context->mm = get_task_mm(current);
+
+	return 0;
+
+ out_refund:
+	refund_locked_memory(current->mm, size);
+	return err;
+}
+
+static inline void free_bts_buffer(struct bts_context *context)
+{
+	if (!context->buffer)
+		return;
+
+	kfree(context->buffer);
+	context->buffer = NULL;
+
+	refund_locked_memory(context->mm, context->size);
+	context->size = 0;
+
+	mmput(context->mm);
+	context->mm = NULL;
+}
+
+static void free_bts_context_work(struct work_struct *w)
+{
+	struct bts_context *context;
+
+	context = container_of(w, struct bts_context, work);
+
+	ds_release_bts(context->tracer);
+	put_task_struct(context->task);
+	free_bts_buffer(context);
+	kfree(context);
+}
+
+static inline void free_bts_context(struct bts_context *context)
+{
+	INIT_WORK(&context->work, free_bts_context_work);
+	schedule_work(&context->work);
+}
+
+static inline struct bts_context *alloc_bts_context(struct task_struct *task)
+{
+	struct bts_context *context = kzalloc(sizeof(*context), GFP_KERNEL);
+	if (context) {
+		context->task = task;
+		task->bts = context;
+
+		get_task_struct(task);
+	}
+
+	return context;
+}
+
 static int ptrace_bts_read_record(struct task_struct *child, size_t index,
 				  struct bts_struct __user *out)
 {
+	struct bts_context *context;
 	const struct bts_trace *trace;
 	struct bts_struct bts;
 	const unsigned char *at;
 	int error;
 
-	trace = ds_read_bts(child->bts);
+	context = child->bts;
+	if (!context)
+		return -ESRCH;
+
+	trace = ds_read_bts(context->tracer);
 	if (!trace)
-		return -EPERM;
+		return -ESRCH;
 
 	at = trace->ds.top - ((index + 1) * trace->ds.size);
 	if ((void *)at < trace->ds.begin)
@@ -597,7 +711,7 @@ static int ptrace_bts_read_record(struct task_struct *child, size_t index,
 	if (!trace->read)
 		return -EOPNOTSUPP;
 
-	error = trace->read(child->bts, at, &bts);
+	error = trace->read(context->tracer, at, &bts);
 	if (error < 0)
 		return error;
 
@@ -611,13 +725,18 @@ static int ptrace_bts_drain(struct task_struct *child,
 			    long size,
 			    struct bts_struct __user *out)
 {
+	struct bts_context *context;
 	const struct bts_trace *trace;
 	const unsigned char *at;
 	int error, drained = 0;
 
-	trace = ds_read_bts(child->bts);
+	context = child->bts;
+	if (!context)
+		return -ESRCH;
+
+	trace = ds_read_bts(context->tracer);
 	if (!trace)
-		return -EPERM;
+		return -ESRCH;
 
 	if (!trace->read)
 		return -EOPNOTSUPP;
@@ -628,9 +747,8 @@ static int ptrace_bts_drain(struct task_struct *child,
 	for (at = trace->ds.begin; (void *)at < trace->ds.top;
 	     out++, drained++, at += trace->ds.size) {
 		struct bts_struct bts;
-		int error;
 
-		error = trace->read(child->bts, at, &bts);
+		error = trace->read(context->tracer, at, &bts);
 		if (error < 0)
 			return error;
 
@@ -640,35 +758,18 @@ static int ptrace_bts_drain(struct task_struct *child,
 
 	memset(trace->ds.begin, 0, trace->ds.n * trace->ds.size);
 
-	error = ds_reset_bts(child->bts);
+	error = ds_reset_bts(context->tracer);
 	if (error < 0)
 		return error;
 
 	return drained;
 }
 
-static int ptrace_bts_allocate_buffer(struct task_struct *child, size_t size)
-{
-	child->bts_buffer = alloc_locked_buffer(size);
-	if (!child->bts_buffer)
-		return -ENOMEM;
-
-	child->bts_size = size;
-
-	return 0;
-}
-
-static void ptrace_bts_free_buffer(struct task_struct *child)
-{
-	free_locked_buffer(child->bts_buffer, child->bts_size);
-	child->bts_buffer = NULL;
-	child->bts_size = 0;
-}
-
 static int ptrace_bts_config(struct task_struct *child,
 			     long cfg_size,
 			     const struct ptrace_bts_config __user *ucfg)
 {
+	struct bts_context *context;
 	struct ptrace_bts_config cfg;
 	unsigned int flags = 0;
 
@@ -678,28 +779,33 @@ static int ptrace_bts_config(struct task_struct *child,
 	if (copy_from_user(&cfg, ucfg, sizeof(cfg)))
 		return -EFAULT;
 
-	if (child->bts) {
-		ds_release_bts(child->bts);
-		child->bts = NULL;
-	}
+	context = child->bts;
+	if (!context)
+		context = alloc_bts_context(child);
+	if (!context)
+		return -ENOMEM;
 
 	if (cfg.flags & PTRACE_BTS_O_SIGNAL) {
 		if (!cfg.signal)
 			return -EINVAL;
 
-		child->thread.bts_ovfl_signal = cfg.signal;
 		return -EOPNOTSUPP;
+		context->bts_ovfl_signal = cfg.signal;
 	}
 
-	if ((cfg.flags & PTRACE_BTS_O_ALLOC) &&
-	    (cfg.size != child->bts_size)) {
-		int error;
+	ds_release_bts(context->tracer);
+	context->tracer = NULL;
 
-		ptrace_bts_free_buffer(child);
+	if ((cfg.flags & PTRACE_BTS_O_ALLOC) && (cfg.size != context->size)) {
+		int err;
 
-		error = ptrace_bts_allocate_buffer(child, cfg.size);
-		if (error < 0)
-			return error;
+		free_bts_buffer(context);
+		if (!cfg.size)
+			return 0;
+
+		err = alloc_bts_buffer(context, cfg.size);
+		if (err < 0)
+			return err;
 	}
 
 	if (cfg.flags & PTRACE_BTS_O_TRACE)
@@ -708,15 +814,14 @@ static int ptrace_bts_config(struct task_struct *child,
 	if (cfg.flags & PTRACE_BTS_O_SCHED)
 		flags |= BTS_TIMESTAMPS;
 
-	child->bts = ds_request_bts(child, child->bts_buffer, child->bts_size,
-				    /* ovfl = */ NULL, /* th = */ (size_t)-1,
-				    flags);
-	if (IS_ERR(child->bts)) {
-		int error = PTR_ERR(child->bts);
-
-		ptrace_bts_free_buffer(child);
-		child->bts = NULL;
+	context->tracer =
+		ds_request_bts_task(child, context->buffer, context->size,
+				    NULL, (size_t)-1, flags);
+	if (unlikely(IS_ERR(context->tracer))) {
+		int error = PTR_ERR(context->tracer);
 
+		free_bts_buffer(context);
+		context->tracer = NULL;
 		return error;
 	}
 
@@ -727,20 +832,25 @@ static int ptrace_bts_status(struct task_struct *child,
 			     long cfg_size,
 			     struct ptrace_bts_config __user *ucfg)
 {
+	struct bts_context *context;
 	const struct bts_trace *trace;
 	struct ptrace_bts_config cfg;
 
+	context = child->bts;
+	if (!context)
+		return -ESRCH;
+
 	if (cfg_size < sizeof(cfg))
 		return -EIO;
 
-	trace = ds_read_bts(child->bts);
+	trace = ds_read_bts(context->tracer);
 	if (!trace)
-		return -EPERM;
+		return -ESRCH;
 
 	memset(&cfg, 0, sizeof(cfg));
-	cfg.size = trace->ds.end - trace->ds.begin;
-	cfg.signal = child->thread.bts_ovfl_signal;
-	cfg.bts_size = sizeof(struct bts_struct);
+	cfg.size	= trace->ds.end - trace->ds.begin;
+	cfg.signal	= context->bts_ovfl_signal;
+	cfg.bts_size	= sizeof(struct bts_struct);
 
 	if (cfg.signal)
 		cfg.flags |= PTRACE_BTS_O_SIGNAL;
@@ -759,80 +869,51 @@ static int ptrace_bts_status(struct task_struct *child,
 
 static int ptrace_bts_clear(struct task_struct *child)
 {
+	struct bts_context *context;
 	const struct bts_trace *trace;
 
-	trace = ds_read_bts(child->bts);
+	context = child->bts;
+	if (!context)
+		return -ESRCH;
+
+	trace = ds_read_bts(context->tracer);
 	if (!trace)
-		return -EPERM;
+		return -ESRCH;
 
 	memset(trace->ds.begin, 0, trace->ds.n * trace->ds.size);
 
-	return ds_reset_bts(child->bts);
+	return ds_reset_bts(context->tracer);
 }
 
 static int ptrace_bts_size(struct task_struct *child)
 {
+	struct bts_context *context;
 	const struct bts_trace *trace;
 
-	trace = ds_read_bts(child->bts);
+	context = child->bts;
+	if (!context)
+		return -ESRCH;
+
+	trace = ds_read_bts(context->tracer);
 	if (!trace)
-		return -EPERM;
+		return -ESRCH;
 
 	return (trace->ds.top - trace->ds.begin) / trace->ds.size;
 }
 
-static void ptrace_bts_fork(struct task_struct *tsk)
-{
-	tsk->bts = NULL;
-	tsk->bts_buffer = NULL;
-	tsk->bts_size = 0;
-	tsk->thread.bts_ovfl_signal = 0;
-}
-
-static void ptrace_bts_untrace(struct task_struct *child)
+/*
+ * Called from __ptrace_unlink() after the child has been moved back
+ * to its original parent.
+ */
+void ptrace_bts_untrace(struct task_struct *child)
 {
 	if (unlikely(child->bts)) {
-		ds_release_bts(child->bts);
+		free_bts_context(child->bts);
 		child->bts = NULL;
-
-		/* We cannot update total_vm and locked_vm since
-		   child's mm is already gone. But we can reclaim the
-		   memory. */
-		kfree(child->bts_buffer);
-		child->bts_buffer = NULL;
-		child->bts_size = 0;
 	}
 }
-
-static void ptrace_bts_detach(struct task_struct *child)
-{
-	/*
-	 * Ptrace_detach() races with ptrace_untrace() in case
-	 * the child dies and is reaped by another thread.
-	 *
-	 * We only do the memory accounting at this point and
-	 * leave the buffer deallocation and the bts tracer
-	 * release to ptrace_bts_untrace() which will be called
-	 * later on with tasklist_lock held.
-	 */
-	release_locked_buffer(child->bts_buffer, child->bts_size);
-}
-#else
-static inline void ptrace_bts_fork(struct task_struct *tsk) {}
-static inline void ptrace_bts_detach(struct task_struct *child) {}
-static inline void ptrace_bts_untrace(struct task_struct *child) {}
 #endif /* CONFIG_X86_PTRACE_BTS */
 
-void x86_ptrace_fork(struct task_struct *child, unsigned long clone_flags)
-{
-	ptrace_bts_fork(child);
-}
-
-void x86_ptrace_untrace(struct task_struct *child)
-{
-	ptrace_bts_untrace(child);
-}
-
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -844,7 +925,6 @@ void ptrace_disable(struct task_struct *child)
 #ifdef TIF_SYSCALL_EMU
 	clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
 #endif
-	ptrace_bts_detach(child);
 }
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 7563b31b4f0..af71d06624b 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -491,5 +491,42 @@ void force_hpet_resume(void)
 		break;
 	}
 }
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
+/* Set correct numa_node information for AMD NB functions */
+static void __init quirk_amd_nb_node(struct pci_dev *dev)
+{
+	struct pci_dev *nb_ht;
+	unsigned int devfn;
+	u32 val;
+
+	devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+	nb_ht = pci_get_slot(dev->bus, devfn);
+	if (!nb_ht)
+		return;
+
+	pci_read_config_dword(nb_ht, 0x60, &val);
+	set_dev_node(&dev->dev, val & 7);
+	pci_dev_put(dev);
+}
 
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
+			quirk_amd_nb_node);
 #endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 1340dad417f..d2d1ce8170f 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -192,6 +192,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
 		},
 	},
+	{   /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */
+		.callback = set_bios_reboot,
+		.ident = "Dell OptiPlex 360",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"),
+			DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
+		},
+	},
 	{	/* Handle problems with rebooting on Dell 2400's */
 		.callback = set_bios_reboot,
 		.ident = "Dell PowerEdge 2400",
@@ -232,6 +241,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
 		},
 	},
+	{	/* Handle problems with rebooting on Sony VGN-Z540N */
+		.callback = set_bios_reboot,
+		.ident = "Sony VGN-Z540N",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b4158439bf6..be5ae80f897 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -112,6 +112,14 @@
 #define ARCH_SETUP
 #endif
 
+/*
+ * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
+ * The direct mapping extends to max_pfn_mapped, so that we can directly access
+ * apertures, ACPI and other tables without having to play with fixmaps.
+ */
+unsigned long max_low_pfn_mapped;
+unsigned long max_pfn_mapped;
+
 RESERVE_BRK(dmi_alloc, 65536);
 
 unsigned int boot_cpu_id __read_mostly;
@@ -214,8 +222,8 @@ unsigned long mmu_cr4_features;
 unsigned long mmu_cr4_features = X86_CR4_PAE;
 #endif
 
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
+/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
+int bootloader_type, bootloader_version;
 
 /*
  * Setup options
@@ -293,15 +301,13 @@ static void __init reserve_brk(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 
-#ifdef CONFIG_X86_32
-
 #define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
 static void __init relocate_initrd(void)
 {
 
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
-	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 	u64 ramdisk_here;
 	unsigned long slop, clen, mapaddr;
 	char *p, *q;
@@ -357,14 +363,13 @@ static void __init relocate_initrd(void)
 		ramdisk_image, ramdisk_image + ramdisk_size - 1,
 		ramdisk_here, ramdisk_here + ramdisk_size - 1);
 }
-#endif
 
 static void __init reserve_initrd(void)
 {
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
 	u64 ramdisk_end   = ramdisk_image + ramdisk_size;
-	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 
 	if (!boot_params.hdr.type_of_loader ||
 	    !ramdisk_image || !ramdisk_size)
@@ -394,14 +399,8 @@ static void __init reserve_initrd(void)
 		return;
 	}
 
-#ifdef CONFIG_X86_32
 	relocate_initrd();
-#else
-	printk(KERN_ERR "initrd extends beyond end of memory "
-	       "(0x%08llx > 0x%08llx)\ndisabling initrd\n",
-	       ramdisk_end, end_of_lowmem);
-	initrd_start = 0;
-#endif
+
 	free_early(ramdisk_image, ramdisk_end);
 }
 #else
@@ -706,6 +705,12 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	saved_video_mode = boot_params.hdr.vid_mode;
 	bootloader_type = boot_params.hdr.type_of_loader;
+	if ((bootloader_type >> 4) == 0xe) {
+		bootloader_type &= 0xf;
+		bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
+	}
+	bootloader_version  = bootloader_type & 0xf;
+	bootloader_version |= boot_params.hdr.ext_loader_ver << 4;
 
 #ifdef CONFIG_BLK_DEV_RAM
 	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
@@ -854,12 +859,16 @@ void __init setup_arch(char **cmdline_p)
 		max_low_pfn = max_pfn;
 
 	high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+	max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
 #endif
 
 #ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
 	setup_bios_corruption_check();
 #endif
 
+	printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
+			max_pfn_mapped<<PAGE_SHIFT);
+
 	reserve_brk();
 
 	/* max_pfn_mapped is updated here */
@@ -997,24 +1006,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_32
 
 /**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init x86_quirk_pre_intr_init(void)
-{
-	if (x86_quirks->arch_pre_intr_init) {
-		if (x86_quirks->arch_pre_intr_init())
-			return;
-	}
-	init_ISA_irqs();
-}
-
-/**
  * x86_quirk_intr_init - post gate setup interrupt initialisation
  *
  * Description:
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 3a97a4cf187..9c3f0823e6a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -160,8 +160,10 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	/*
 	 * If large page isn't supported, there's no benefit in doing
 	 * this.  Also, on non-NUMA, embedding is better.
+	 *
+	 * NOTE: disabled for now.
 	 */
-	if (!cpu_has_pse || !pcpu_need_numa())
+	if (true || !cpu_has_pse || !pcpu_need_numa())
 		return -EINVAL;
 
 	/*
@@ -423,6 +425,14 @@ void __init setup_per_cpu_areas(void)
 	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
 #endif
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
+	/*
+	 * make sure boot cpu node_number is right, when boot cpu is on the
+	 * node that doesn't have mem installed
+	 */
+	per_cpu(node_number, boot_cpu_id) = cpu_to_node(boot_cpu_id);
+#endif
+
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
 
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 14425166b8e..4c578751e94 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -6,7 +6,6 @@
  *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
  *  2000-2002   x86-64 support by Andi Kleen
  */
-
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -25,11 +24,11 @@
 #include <asm/ucontext.h>
 #include <asm/i387.h>
 #include <asm/vdso.h>
+#include <asm/mce.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/proto.h>
 #include <asm/ia32_unistd.h>
-#include <asm/mce.h>
 #endif /* CONFIG_X86_64 */
 
 #include <asm/syscall.h>
@@ -857,10 +856,10 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#ifdef CONFIG_X86_NEW_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
-		mce_notify_user();
+		mce_notify_process();
 #endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
 
 	/* deal with pending signal delivery */
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 13f33ea8cca..ec1de97600e 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -150,14 +150,40 @@ void native_send_call_func_ipi(const struct cpumask *mask)
  * this function calls the 'stop' function on all other CPUs in the system.
  */
 
+asmlinkage void smp_reboot_interrupt(void)
+{
+	ack_APIC_irq();
+	irq_enter();
+	stop_this_cpu(NULL);
+	irq_exit();
+}
+
 static void native_smp_send_stop(void)
 {
 	unsigned long flags;
+	unsigned long wait;
 
 	if (reboot_force)
 		return;
 
-	smp_call_function(stop_this_cpu, NULL, 0);
+	/*
+	 * Use an own vector here because smp_call_function
+	 * does lots of things not suitable in a panic situation.
+	 * On most systems we could also use an NMI here,
+	 * but there are a few systems around where NMI
+	 * is problematic so stay with an non NMI for now
+	 * (this implies we cannot stop CPUs spinning with irq off
+	 * currently)
+	 */
+	if (num_online_cpus() > 1) {
+		apic->send_IPI_allbutself(REBOOT_VECTOR);
+
+		/* Don't wait longer than a second */
+		wait = USEC_PER_SEC;
+		while (num_online_cpus() > 1 && wait--)
+			udelay(1);
+	}
+
 	local_irq_save(flags);
 	disable_local_APIC();
 	local_irq_restore(flags);
@@ -172,6 +198,9 @@ void smp_reschedule_interrupt(struct pt_regs *regs)
 {
 	ack_APIC_irq();
 	inc_irq_stat(irq_resched_count);
+	/*
+	 * KVM uses this interrupt to force a cpu out of guest mode
+	 */
 }
 
 void smp_call_function_interrupt(struct pt_regs *regs)
@@ -193,19 +222,19 @@ void smp_call_function_single_interrupt(struct pt_regs *regs)
 }
 
 struct smp_ops smp_ops = {
-	.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = native_smp_prepare_cpus,
-	.smp_cpus_done = native_smp_cpus_done,
+	.smp_prepare_boot_cpu	= native_smp_prepare_boot_cpu,
+	.smp_prepare_cpus	= native_smp_prepare_cpus,
+	.smp_cpus_done		= native_smp_cpus_done,
 
-	.smp_send_stop = native_smp_send_stop,
-	.smp_send_reschedule = native_smp_send_reschedule,
+	.smp_send_stop		= native_smp_send_stop,
+	.smp_send_reschedule	= native_smp_send_reschedule,
 
-	.cpu_up = native_cpu_up,
-	.cpu_die = native_cpu_die,
-	.cpu_disable = native_cpu_disable,
-	.play_dead = native_play_dead,
+	.cpu_up			= native_cpu_up,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
 
-	.send_call_func_ipi = native_send_call_func_ipi,
+	.send_call_func_ipi	= native_send_call_func_ipi,
 	.send_call_func_single_ipi = native_send_call_func_single_ipi,
 };
 EXPORT_SYMBOL_GPL(smp_ops);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 58d24ef917d..2fecda69ee6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -504,7 +504,7 @@ void __inquire_remote_apic(int apicid)
  * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
  * won't ... remember to clear down the APIC, etc later.
  */
-int __devinit
+int __cpuinit
 wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
 {
 	unsigned long send_status, accept_status = 0;
@@ -538,7 +538,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
 	return (send_status | accept_status);
 }
 
-int __devinit
+static int __cpuinit
 wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 {
 	unsigned long send_status, accept_status = 0;
@@ -822,10 +822,12 @@ do_rest:
 	/* mark "stuck" area as not stuck */
 	*((volatile unsigned long *)trampoline_base) = 0;
 
-	/*
-	 * Cleanup possible dangling ends...
-	 */
-	smpboot_restore_warm_reset_vector();
+	if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
+		/*
+		 * Cleanup possible dangling ends...
+		 */
+		smpboot_restore_warm_reset_vector();
+	}
 
 	return boot_error;
 }
@@ -871,7 +873,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	err = do_boot_cpu(apicid, cpu);
 
-	zap_low_mappings();
+	zap_low_mappings(false);
 	low_mappings = 0;
 #else
 	err = do_boot_cpu(apicid, cpu);
@@ -990,10 +992,12 @@ static int __init smp_sanity_check(unsigned max_cpus)
 	 */
 	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
 	    !cpu_has_apic) {
-		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-			boot_cpu_physical_apicid);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation."
+		if (!disable_apic) {
+			pr_err("BIOS bug, local APIC #%d not detected!...\n",
+				boot_cpu_physical_apicid);
+			pr_err("... forcing use of dummy APIC emulation."
 				"(tell your hw vendor)\n");
+		}
 		smpboot_clear_io_apic();
 		arch_disable_smp_support();
 		return -1;
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index f7bddc2e37d..4aaf7e48394 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -20,7 +20,7 @@ save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
 
 static int save_stack_stack(void *data, char *name)
 {
-	return -1;
+	return 0;
 }
 
 static void save_stack_address(void *data, unsigned long addr, int reliable)
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index ff5c8736b49..d51321ddafd 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -334,3 +334,5 @@ ENTRY(sys_call_table)
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_counter_open
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index ed0c33761e6..124d40c575d 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -715,7 +715,12 @@ uv_activation_descriptor_init(int node, int pnode)
 	struct bau_desc *adp;
 	struct bau_desc *ad2;
 
-	adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
+	/*
+	 * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
+	 * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per blade
+	 */
+	adp = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
+		UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
 	BUG_ON(!adp);
 
 	pa = uv_gpa(adp); /* need the real nasid*/
@@ -729,7 +734,13 @@ uv_activation_descriptor_init(int node, int pnode)
 				      (n << UV_DESC_BASE_PNODE_SHIFT | m));
 	}
 
-	for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
+	/*
+	 * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
+	 * cpu even though we only use the first one; one descriptor can
+	 * describe a broadcast to 256 nodes.
+	 */
+	for (i = 0, ad2 = adp; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR);
+		i++, ad2++) {
 		memset(ad2, 0, sizeof(struct bau_desc));
 		ad2->header.sw_ack_flag = 1;
 		/*
@@ -832,7 +843,7 @@ static int __init uv_bau_init(void)
 		return 0;
 
 	for_each_possible_cpu(cur_cpu)
-		alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
+		zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
 				       GFP_KERNEL, cpu_to_node(cur_cpu));
 
 	uv_bau_retry_limit = 1;
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a1d288327ff..1e1e27b7d43 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -798,15 +798,15 @@ unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
 
 	return new_kesp;
 }
-#else
+#endif
+
 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
 {
 }
 
-asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
+asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 {
 }
-#endif
 
 /*
  * 'math_state_restore()' saves the current math information in the
@@ -839,9 +839,6 @@ asmlinkage void math_state_restore(void)
 	}
 
 	clts();				/* Allow maths ops (or we recurse) */
-#ifdef CONFIG_X86_32
-	restore_fpu(tsk);
-#else
 	/*
 	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
 	 */
@@ -850,7 +847,7 @@ asmlinkage void math_state_restore(void)
 		force_sig(SIGSEGV, tsk);
 		return;
 	}
-#endif
+
 	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
 	tsk->fpu_counter++;
 }
@@ -945,8 +942,13 @@ void __init trap_init(void)
 #endif
 	set_intr_gate(19, &simd_coprocessor_error);
 
+	/* Reserve all the builtin and the syscall vector: */
+	for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
+		set_bit(i, used_vectors);
+
 #ifdef CONFIG_IA32_EMULATION
 	set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
+	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
 #ifdef CONFIG_X86_32
@@ -963,17 +965,9 @@ void __init trap_init(void)
 	}
 
 	set_system_trap_gate(SYSCALL_VECTOR, &system_call);
-#endif
-
-	/* Reserve all the builtin and the syscall vector: */
-	for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
-		set_bit(i, used_vectors);
-
-#ifdef CONFIG_X86_64
-	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
-#else
 	set_bit(SYSCALL_VECTOR, used_vectors);
 #endif
+
 	/*
 	 * Should be a barrier for any external CPU state:
 	 */
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index d57de05dc43..3e1c057e98f 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -384,13 +384,13 @@ unsigned long native_calibrate_tsc(void)
 {
 	u64 tsc1, tsc2, delta, ref1, ref2;
 	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
-	unsigned long flags, latch, ms, fast_calibrate, tsc_khz;
+	unsigned long flags, latch, ms, fast_calibrate, hv_tsc_khz;
 	int hpet = is_hpet_enabled(), i, loopmin;
 
-	tsc_khz = get_hypervisor_tsc_freq();
-	if (tsc_khz) {
+	hv_tsc_khz = get_hypervisor_tsc_freq();
+	if (hv_tsc_khz) {
 		printk(KERN_INFO "TSC: Frequency read from the hypervisor\n");
-		return tsc_khz;
+		return hv_tsc_khz;
 	}
 
 	local_irq_save(flags);
@@ -710,7 +710,16 @@ static cycle_t read_tsc(struct clocksource *cs)
 #ifdef CONFIG_X86_64
 static cycle_t __vsyscall_fn vread_tsc(void)
 {
-	cycle_t ret = (cycle_t)vget_cycles();
+	cycle_t ret;
+
+	/*
+	 * Surround the RDTSC by barriers, to make sure it's not
+	 * speculated to outside the seqlock critical section and
+	 * does not cause time warps:
+	 */
+	rdtsc_barrier();
+	ret = (cycle_t)vget_cycles();
+	rdtsc_barrier();
 
 	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
 		ret : __vsyscall_gtod_data.clock.cycle_last;
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index bf36328f6ef..027b5b49899 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -34,6 +34,7 @@ static __cpuinitdata atomic_t stop_count;
  * of a critical section, to be able to prove TSC time-warps:
  */
 static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED;
+
 static __cpuinitdata cycles_t last_tsc;
 static __cpuinitdata cycles_t max_warp;
 static __cpuinitdata int nr_warps;
@@ -113,13 +114,12 @@ void __cpuinit check_tsc_sync_source(int cpu)
 		return;
 
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
-		printk(KERN_INFO
-		       "Skipping synchronization checks as TSC is reliable.\n");
+		pr_info("Skipping synchronization checks as TSC is reliable.\n");
 		return;
 	}
 
-	printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:",
-			  smp_processor_id(), cpu);
+	pr_info("checking TSC synchronization [CPU#%d -> CPU#%d]:",
+		smp_processor_id(), cpu);
 
 	/*
 	 * Reset it - in case this is a second bootup:
@@ -143,8 +143,8 @@ void __cpuinit check_tsc_sync_source(int cpu)
 
 	if (nr_warps) {
 		printk("\n");
-		printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
-				    " turning off TSC clock.\n", max_warp);
+		pr_warning("Measured %Ld cycles TSC warp between CPUs, "
+			   "turning off TSC clock.\n", max_warp);
 		mark_tsc_unstable("check_tsc_sync_source failed");
 	} else {
 		printk(" passed.\n");
@@ -195,5 +195,3 @@ void __cpuinit check_tsc_sync_target(void)
 	while (atomic_read(&stop_count) != cpus)
 		cpu_relax();
 }
-#undef NR_LOOPS
-
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index d7ac84e7fc1..9c4e6253905 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -287,10 +287,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 	info->regs.pt.ds = 0;
 	info->regs.pt.es = 0;
 	info->regs.pt.fs = 0;
-
-/* we are clearing gs later just before "jmp resume_userspace",
- * because it is not saved/restored.
- */
+#ifndef CONFIG_X86_32_LAZY_GS
+	info->regs.pt.gs = 0;
+#endif
 
 /*
  * The flags register is also special: we cannot trust that the user
@@ -318,9 +317,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 	}
 
 /*
- * Save old state, set default return value (%ax) to 0
+ * Save old state, set default return value (%ax) to 0 (VM86_SIGNAL)
  */
-	info->regs32->ax = 0;
+	info->regs32->ax = VM86_SIGNAL;
 	tsk->thread.saved_sp0 = tsk->thread.sp0;
 	tsk->thread.saved_fs = info->regs32->fs;
 	tsk->thread.saved_gs = get_user_gs(info->regs32);
@@ -343,7 +342,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 	__asm__ __volatile__(
 		"movl %0,%%esp\n\t"
 		"movl %1,%%ebp\n\t"
+#ifdef CONFIG_X86_32_LAZY_GS
 		"mov  %2, %%gs\n\t"
+#endif
 		"jmp resume_userspace"
 		: /* no outputs */
 		:"r" (&info->regs), "r" (task_thread_info(tsk)), "r" (0));
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 95deb9f2211..b263423fbe2 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -462,22 +462,28 @@ vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 }
 #endif
 
-static void vmi_enter_lazy_cpu(void)
+static void vmi_start_context_switch(struct task_struct *prev)
 {
-	paravirt_enter_lazy_cpu();
+	paravirt_start_context_switch(prev);
 	vmi_ops.set_lazy_mode(2);
 }
 
+static void vmi_end_context_switch(struct task_struct *next)
+{
+	vmi_ops.set_lazy_mode(0);
+	paravirt_end_context_switch(next);
+}
+
 static void vmi_enter_lazy_mmu(void)
 {
 	paravirt_enter_lazy_mmu();
 	vmi_ops.set_lazy_mode(1);
 }
 
-static void vmi_leave_lazy(void)
+static void vmi_leave_lazy_mmu(void)
 {
-	paravirt_leave_lazy(paravirt_get_lazy_mode());
 	vmi_ops.set_lazy_mode(0);
+	paravirt_leave_lazy_mmu();
 }
 
 static inline int __init check_vmi_rom(struct vrom_header *rom)
@@ -711,14 +717,14 @@ static inline int __init activate_vmi(void)
 	para_fill(pv_cpu_ops.set_iopl_mask, SetIOPLMask);
 	para_fill(pv_cpu_ops.io_delay, IODelay);
 
-	para_wrap(pv_cpu_ops.lazy_mode.enter, vmi_enter_lazy_cpu,
+	para_wrap(pv_cpu_ops.start_context_switch, vmi_start_context_switch,
 		  set_lazy_mode, SetLazyMode);
-	para_wrap(pv_cpu_ops.lazy_mode.leave, vmi_leave_lazy,
+	para_wrap(pv_cpu_ops.end_context_switch, vmi_end_context_switch,
 		  set_lazy_mode, SetLazyMode);
 
 	para_wrap(pv_mmu_ops.lazy_mode.enter, vmi_enter_lazy_mmu,
 		  set_lazy_mode, SetLazyMode);
-	para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy,
+	para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy_mmu,
 		  set_lazy_mode, SetLazyMode);
 
 	/* user and kernel flush are just handled with different flags to FlushTLB */
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 849ee611f01..367e8788204 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -1,5 +1,433 @@
+/*
+ * ld script for the x86 kernel
+ *
+ * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * Modernisation, unification and other changes and fixes:
+ *   Copyright (C) 2007-2009  Sam Ravnborg <sam@ravnborg.org>
+ *
+ *
+ * Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
+ */
+
 #ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
+#define LOAD_OFFSET __PAGE_OFFSET
 #else
-# include "vmlinux_64.lds.S"
+#define LOAD_OFFSET __START_KERNEL_map
 #endif
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page_types.h>
+#include <asm/cache.h>
+#include <asm/boot.h>
+
+#undef i386     /* in case the preprocessor is a 32bit one */
+
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#ifdef CONFIG_X86_32
+OUTPUT_ARCH(i386)
+ENTRY(phys_startup_32)
+jiffies = jiffies_64;
+#else
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(phys_startup_64)
+jiffies_64 = jiffies;
+#endif
+
+PHDRS {
+	text PT_LOAD FLAGS(5);          /* R_E */
+	data PT_LOAD FLAGS(7);          /* RWE */
+#ifdef CONFIG_X86_64
+	user PT_LOAD FLAGS(7);          /* RWE */
+	data.init PT_LOAD FLAGS(7);     /* RWE */
+#ifdef CONFIG_SMP
+	percpu PT_LOAD FLAGS(7);        /* RWE */
+#endif
+	data.init2 PT_LOAD FLAGS(7);    /* RWE */
+#endif
+	note PT_NOTE FLAGS(0);          /* ___ */
+}
+
+SECTIONS
+{
+#ifdef CONFIG_X86_32
+        . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+        phys_startup_32 = startup_32 - LOAD_OFFSET;
+#else
+        . = __START_KERNEL;
+        phys_startup_64 = startup_64 - LOAD_OFFSET;
+#endif
+
+	/* Text and read-only data */
+
+	/* bootstrapping code */
+	.text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+		_text = .;
+		*(.text.head)
+	} :text = 0x9090
+
+	/* The rest of the text */
+	.text :  AT(ADDR(.text) - LOAD_OFFSET) {
+#ifdef CONFIG_X86_32
+		/* not really needed, already page aligned */
+		. = ALIGN(PAGE_SIZE);
+		*(.text.page_aligned)
+#endif
+		. = ALIGN(8);
+		_stext = .;
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		IRQENTRY_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+		/* End of text section */
+		_etext = .;
+	} :text = 0x9090
+
+	NOTES :text :note
+
+	/* Exception table */
+	. = ALIGN(16);
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	} :text = 0x9090
+
+	RODATA
+
+	/* Data */
+	. = ALIGN(PAGE_SIZE);
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {
+		/* Start of data section */
+		_sdata = .;
+		DATA_DATA
+		CONSTRUCTORS
+
+#ifdef CONFIG_X86_64
+		/* End of data section */
+		_edata = .;
+#endif
+	} :data
+
+#ifdef CONFIG_X86_32
+	/* 32 bit has nosave before _edata */
+	. = ALIGN(PAGE_SIZE);
+	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+		__nosave_begin = .;
+		*(.data.nosave)
+		. = ALIGN(PAGE_SIZE);
+		__nosave_end = .;
+	}
+#endif
+
+	. = ALIGN(PAGE_SIZE);
+	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+		*(.data.page_aligned)
+		*(.data.idt)
+	}
+
+#ifdef CONFIG_X86_32
+	. = ALIGN(32);
+#else
+	. = ALIGN(PAGE_SIZE);
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+#endif
+	.data.cacheline_aligned :
+		AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+		*(.data.cacheline_aligned)
+	}
+
+	/* rarely changed data like cpu maps */
+#ifdef CONFIG_X86_32
+	. = ALIGN(32);
+#else
+	. = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
+#endif
+	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+		*(.data.read_mostly)
+
+#ifdef CONFIG_X86_32
+		/* End of data section */
+		_edata = .;
+#endif
+	}
+
+#ifdef CONFIG_X86_64
+
+#define VSYSCALL_ADDR (-10*1024*1024)
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
+                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
+                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+
+#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
+
+#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
+
+	. = VSYSCALL_ADDR;
+	.vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+		*(.vsyscall_0)
+	} :user
+
+	__vsyscall_0 = VSYSCALL_VIRT_ADDR;
+
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
+		*(.vsyscall_fn)
+	}
+
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	.vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
+		*(.vsyscall_gtod_data)
+	}
+
+	vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
+	.vsyscall_clock : AT(VLOAD(.vsyscall_clock)) {
+		*(.vsyscall_clock)
+	}
+	vsyscall_clock = VVIRT(.vsyscall_clock);
+
+
+	.vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) {
+		*(.vsyscall_1)
+	}
+	.vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) {
+		*(.vsyscall_2)
+	}
+
+	.vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) {
+		*(.vgetcpu_mode)
+	}
+	vgetcpu_mode = VVIRT(.vgetcpu_mode);
+
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	.jiffies : AT(VLOAD(.jiffies)) {
+		*(.jiffies)
+	}
+	jiffies = VVIRT(.jiffies);
+
+	.vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
+		*(.vsyscall_3)
+	}
+
+	. = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+
+#undef VSYSCALL_ADDR
+#undef VSYSCALL_PHYS_ADDR
+#undef VSYSCALL_VIRT_ADDR
+#undef VLOAD_OFFSET
+#undef VLOAD
+#undef VVIRT_OFFSET
+#undef VVIRT
+
+#endif /* CONFIG_X86_64 */
+
+	/* init_task */
+	. = ALIGN(THREAD_SIZE);
+	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+		*(.data.init_task)
+	}
+#ifdef CONFIG_X86_64
+	 :data.init
+#endif
+
+	/*
+	 * smp_locks might be freed after init
+	 * start/end must be page aligned
+	 */
+	. = ALIGN(PAGE_SIZE);
+	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+		__smp_locks = .;
+		*(.smp_locks)
+		__smp_locks_end = .;
+		. = ALIGN(PAGE_SIZE);
+	}
+
+	/* Init code and data - will be freed after init */
+	. = ALIGN(PAGE_SIZE);
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+		__init_begin = .; /* paired with __init_end */
+		_sinittext = .;
+		INIT_TEXT
+		_einittext = .;
+	}
+
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+		INIT_DATA
+	}
+
+	. = ALIGN(16);
+	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+		__setup_start = .;
+		*(.init.setup)
+		__setup_end = .;
+	}
+	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+		__initcall_start = .;
+		INITCALLS
+		__initcall_end = .;
+	}
+
+	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+
+	.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+		__x86_cpu_dev_start = .;
+		*(.x86_cpu_dev.init)
+		__x86_cpu_dev_end = .;
+	}
+
+	SECURITY_INIT
+
+	. = ALIGN(8);
+	.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+		__parainstructions = .;
+		*(.parainstructions)
+		__parainstructions_end = .;
+	}
+
+	. = ALIGN(8);
+	.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+		__alt_instructions = .;
+		*(.altinstructions)
+		__alt_instructions_end = .;
+	}
+
+	.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+		*(.altinstr_replacement)
+	}
+
+	/*
+	 * .exit.text is discard at runtime, not link time, to deal with
+	 *  references from .altinstructions and .eh_frame
+	 */
+	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+		EXIT_TEXT
+	}
+
+	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+		EXIT_DATA
+	}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	. = ALIGN(PAGE_SIZE);
+	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+	}
+#endif
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
+	/*
+	 * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
+	 * output PHDR, so the next output section - __data_nosave - should
+	 * start another section data.init2.  Also, pda should be at the head of
+	 * percpu area.  Preallocate it and define the percpu offset symbol
+	 * so that it can be accessed as a percpu variable.
+	 */
+	. = ALIGN(PAGE_SIZE);
+	PERCPU_VADDR(0, :percpu)
+#else
+	PERCPU(PAGE_SIZE)
+#endif
+
+	. = ALIGN(PAGE_SIZE);
+
+	/* freed after init ends here */
+	.init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
+		__init_end = .;
+	}
+
+#ifdef CONFIG_X86_64
+	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+		. = ALIGN(PAGE_SIZE);
+		__nosave_begin = .;
+		*(.data.nosave)
+		. = ALIGN(PAGE_SIZE);
+		__nosave_end = .;
+	} :data.init2
+	/* use another section data.init2, see PERCPU_VADDR() above */
+#endif
+
+	/* BSS */
+	. = ALIGN(PAGE_SIZE);
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+		__bss_start = .;
+		*(.bss.page_aligned)
+		*(.bss)
+		. = ALIGN(4);
+		__bss_stop = .;
+	}
+
+	. = ALIGN(PAGE_SIZE);
+	.brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+		__brk_base = .;
+		. += 64 * 1024;		/* 64k alignment slop space */
+		*(.brk_reservation)	/* areas brk users have reserved */
+		__brk_limit = .;
+	}
+
+	.end : AT(ADDR(.end) - LOAD_OFFSET) {
+		_end = .;
+	}
+
+	/* Sections to be discarded */
+	/DISCARD/ : {
+		*(.exitcall.exit)
+		*(.eh_frame)
+		*(.discard)
+	}
+
+        STABS_DEBUG
+        DWARF_DEBUG
+}
+
+
+#ifdef CONFIG_X86_32
+ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+        "kernel image bigger than KERNEL_IMAGE_SIZE")
+#else
+/*
+ * Per-cpu symbols which need to be offset from __per_cpu_load
+ * for the boot processor.
+ */
+#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+INIT_PER_CPU(gdt_page);
+INIT_PER_CPU(irq_stack_union);
+
+/*
+ * Build-time check on the image size:
+ */
+ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+	"kernel image bigger than KERNEL_IMAGE_SIZE")
+
+#ifdef CONFIG_SMP
+ASSERT((per_cpu__irq_stack_union == 0),
+        "irq_stack_union is not at start of per-cpu area");
+#endif
+
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+       "kexec control code size is too big")
+#endif
+
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
deleted file mode 100644
index 62ad500d55f..00000000000
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ /dev/null
@@ -1,229 +0,0 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- *
- * Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-
-#define LOAD_OFFSET __PAGE_OFFSET
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/page_types.h>
-#include <asm/cache.h>
-#include <asm/boot.h>
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(phys_startup_32)
-jiffies = jiffies_64;
-
-PHDRS {
-	text PT_LOAD FLAGS(5);	/* R_E */
-	data PT_LOAD FLAGS(7);	/* RWE */
-	note PT_NOTE FLAGS(0);	/* ___ */
-}
-SECTIONS
-{
-  . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
-  phys_startup_32 = startup_32 - LOAD_OFFSET;
-
-  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-  	_text = .;			/* Text and read-only data */
-	*(.text.head)
-  } :text = 0x9090
-
-  /* read-only */
-  .text : AT(ADDR(.text) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
-	*(.text.page_aligned)
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	KPROBES_TEXT
-	IRQENTRY_TEXT
-	*(.fixup)
-	*(.gnu.warning)
-  	_etext = .;			/* End of text section */
-  } :text = 0x9090
-
-  NOTES :text :note
-
-  . = ALIGN(16);		/* Exception table */
-  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-  	__start___ex_table = .;
-	 *(__ex_table)
-  	__stop___ex_table = .;
-  } :text = 0x9090
-
-  RODATA
-
-  /* writeable */
-  . = ALIGN(PAGE_SIZE);
-  .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	} :data
-
-  . = ALIGN(PAGE_SIZE);
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-  	__nosave_begin = .;
-	*(.data.nosave)
-  	. = ALIGN(PAGE_SIZE);
-  	__nosave_end = .;
-  }
-
-  . = ALIGN(PAGE_SIZE);
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-	*(.data.page_aligned)
-	*(.data.idt)
-  }
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-	*(.data.cacheline_aligned)
-  }
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-	*(.data.read_mostly)
-	_edata = .;		/* End of data section */
-  }
-
-  . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-	*(.data.init_task)
-  }
-
-  /* might get freed after init */
-  . = ALIGN(PAGE_SIZE);
-  .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-  	__smp_locks = .;
-	*(.smp_locks)
-	__smp_locks_end = .;
-  }
-  /* will be freed after init
-   * Following ALIGN() is required to make sure no other data falls on the
-   * same page where __smp_alt_end is pointing as that page might be freed
-   * after boot. Always make sure that ALIGN() directive is present after
-   * the section which contains __smp_alt_end.
-   */
-  . = ALIGN(PAGE_SIZE);
-
-  /* will be freed after init */
-  . = ALIGN(PAGE_SIZE);		/* Init code and data */
-  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-  	__init_begin = .;
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-	INIT_DATA
-  }
-  . = ALIGN(16);
-  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-  	__setup_start = .;
-	*(.init.setup)
-  	__setup_end = .;
-   }
-  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-  	__initcall_start = .;
-	INITCALLS
-  	__initcall_end = .;
-  }
-  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-  	__con_initcall_start = .;
-	*(.con_initcall.init)
-  	__con_initcall_end = .;
-  }
-  .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
-	__x86_cpu_dev_start = .;
-	*(.x86_cpu_dev.init)
-	__x86_cpu_dev_end = .;
-  }
-  SECURITY_INIT
-  . = ALIGN(4);
-  .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
-  	__alt_instructions = .;
-	*(.altinstructions)
-	__alt_instructions_end = .;
-  }
-  .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
-	*(.altinstr_replacement)
-  }
-  . = ALIGN(4);
-  .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
-  	__parainstructions = .;
-	*(.parainstructions)
-  	__parainstructions_end = .;
-  }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
-	EXIT_TEXT
-  }
-  .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
-	EXIT_DATA
-  }
-#if defined(CONFIG_BLK_DEV_INITRD)
-  . = ALIGN(PAGE_SIZE);
-  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
-  }
-#endif
-  PERCPU(PAGE_SIZE)
-  . = ALIGN(PAGE_SIZE);
-  /* freed after init ends here */
-
-  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-	__init_end = .;
-	__bss_start = .;		/* BSS */
-	*(.bss.page_aligned)
-	*(.bss)
-	. = ALIGN(4);
-	__bss_stop = .;
-  }
-
-  .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE);
-	__brk_base = . ;
- 	. += 64 * 1024 ;	/* 64k alignment slop space */
-	*(.brk_reservation)	/* areas brk users have reserved */
-	__brk_limit = . ;
-  }
-
-  .end : AT(ADDR(.end) - LOAD_OFFSET) {
-	_end = . ;
-  }
-
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
-  STABS_DEBUG
-
-  DWARF_DEBUG
-}
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
-	"kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_KEXEC
-/* Link time checks */
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
-       "kexec control code size is too big")
-#endif
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
deleted file mode 100644
index c8742507b03..00000000000
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ /dev/null
@@ -1,298 +0,0 @@
-/* ld script to make x86-64 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- */
-
-#define LOAD_OFFSET __START_KERNEL_map
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/asm-offsets.h>
-#include <asm/page_types.h>
-
-#undef i386	/* in case the preprocessor is a 32bit one */
-
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
-PHDRS {
-	text PT_LOAD FLAGS(5);	/* R_E */
-	data PT_LOAD FLAGS(7);	/* RWE */
-	user PT_LOAD FLAGS(7);	/* RWE */
-	data.init PT_LOAD FLAGS(7);	/* RWE */
-#ifdef CONFIG_SMP
-	percpu PT_LOAD FLAGS(7);	/* RWE */
-#endif
-	data.init2 PT_LOAD FLAGS(7);	/* RWE */
-	note PT_NOTE FLAGS(0);	/* ___ */
-}
-SECTIONS
-{
-  . = __START_KERNEL;
-  phys_startup_64 = startup_64 - LOAD_OFFSET;
-  .text :  AT(ADDR(.text) - LOAD_OFFSET) {
-	_text = .;			/* Text and read-only data */
-	/* First the code that has to be first for bootstrapping */
-	*(.text.head)
-	_stext = .;
-	/* Then the rest */
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	KPROBES_TEXT
-	IRQENTRY_TEXT
-	*(.fixup)
-	*(.gnu.warning)
-	_etext = .;		/* End of text section */
-  } :text = 0x9090
-
-  NOTES :text :note
-
-  . = ALIGN(16);		/* Exception table */
-  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-  	__start___ex_table = .;
-	 *(__ex_table)
-  	__stop___ex_table = .;
-  } :text = 0x9090
-
-  RODATA
-
-  . = ALIGN(PAGE_SIZE);		/* Align data segment to page size boundary */
-				/* Data */
-  .data : AT(ADDR(.data) - LOAD_OFFSET) {
-	DATA_DATA
-	CONSTRUCTORS
-	_edata = .;			/* End of data section */
-	} :data
-
-
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE);
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-	*(.data.cacheline_aligned)
-  }
-  . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-  	*(.data.read_mostly)
-  }
-
-#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
-#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
-
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
-#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
-
-  . = VSYSCALL_ADDR;
-  .vsyscall_0 :	 AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
-  __vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) }
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data))
-		{ *(.vsyscall_gtod_data) }
-  vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
-  .vsyscall_clock : AT(VLOAD(.vsyscall_clock))
-		{ *(.vsyscall_clock) }
-  vsyscall_clock = VVIRT(.vsyscall_clock);
-
-
-  .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
-		{ *(.vsyscall_1) }
-  .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
-		{ *(.vsyscall_2) }
-
-  .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
-  vgetcpu_mode = VVIRT(.vgetcpu_mode);
-
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
-  jiffies = VVIRT(.jiffies);
-
-  .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
-		{ *(.vsyscall_3) }
-
-  . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
-
-#undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
-#undef VLOAD_OFFSET
-#undef VLOAD
-#undef VVIRT_OFFSET
-#undef VVIRT
-
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-	. = ALIGN(THREAD_SIZE);	/* init_task */
-	*(.data.init_task)
-  }:data.init
-
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE);
-	*(.data.page_aligned)
-  }
-
-  .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-	/* might get freed after init */
-	. = ALIGN(PAGE_SIZE);
-	__smp_alt_begin = .;
-	__smp_locks = .;
-	*(.smp_locks)
-	__smp_locks_end = .;
-	. = ALIGN(PAGE_SIZE);
-	__smp_alt_end = .;
-  }
-
-  . = ALIGN(PAGE_SIZE);		/* Init code and data */
-  __init_begin = .;	/* paired with __init_end */
-  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-	__initdata_begin = .;
-	INIT_DATA
-	__initdata_end = .;
-   }
-
-  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-	. = ALIGN(16);
-	__setup_start = .;
-	*(.init.setup)
-	__setup_end = .;
-  }
-  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-	__initcall_start = .;
-	INITCALLS
-	__initcall_end = .;
-  }
-  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-	__con_initcall_start = .;
-	*(.con_initcall.init)
-	__con_initcall_end = .;
-  }
-  .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
-	__x86_cpu_dev_start = .;
-	*(.x86_cpu_dev.init)
-	__x86_cpu_dev_end = .;
-  }
-  SECURITY_INIT
-
-  . = ALIGN(8);
-  .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
-	__parainstructions = .;
-       *(.parainstructions)
-	__parainstructions_end = .;
-  }
-
-  .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
-	. = ALIGN(8);
-	__alt_instructions = .;
-	*(.altinstructions)
-	__alt_instructions_end = .;
-  }
-  .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
-	*(.altinstr_replacement)
-  }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
-	EXIT_TEXT
-  }
-  .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
-	EXIT_DATA
-  }
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(PAGE_SIZE);
-  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
-  }
-#endif
-
-#ifdef CONFIG_SMP
-  /*
-   * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
-   * output PHDR, so the next output section - __data_nosave - should
-   * start another section data.init2.  Also, pda should be at the head of
-   * percpu area.  Preallocate it and define the percpu offset symbol
-   * so that it can be accessed as a percpu variable.
-   */
-  . = ALIGN(PAGE_SIZE);
-  PERCPU_VADDR(0, :percpu)
-#else
-  PERCPU(PAGE_SIZE)
-#endif
-
-  . = ALIGN(PAGE_SIZE);
-  __init_end = .;
-
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE);
-	__nosave_begin = .;
-	*(.data.nosave)
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
-  } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */
-
-  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE);
-	__bss_start = .;		/* BSS */
-	*(.bss.page_aligned)
-	*(.bss)
-	__bss_stop = .;
-  }
-
-  .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
-	. = ALIGN(PAGE_SIZE);
-	__brk_base = . ;
- 	. += 64 * 1024 ;	/* 64k alignment slop space */
-	*(.brk_reservation)	/* areas brk users have reserved */
-	__brk_limit = . ;
-  }
-
-  _end = . ;
-
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	*(.exitcall.exit)
-	*(.eh_frame)
-	*(.discard)
-	}
-
-  STABS_DEBUG
-
-  DWARF_DEBUG
-}
-
- /*
-  * Per-cpu symbols which need to be offset from __per_cpu_load
-  * for the boot processor.
-  */
-#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
-INIT_PER_CPU(gdt_page);
-INIT_PER_CPU(irq_stack_union);
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
-	"kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
-        "irq_stack_union is not at start of per-cpu area");
-#endif
-
-#ifdef CONFIG_KEXEC
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
-       "kexec control code size is too big")
-#endif
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 44153afc906..25ee06a80aa 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -132,15 +132,7 @@ static __always_inline void do_vgettimeofday(struct timeval * tv)
 			return;
 		}
 
-		/*
-		 * Surround the RDTSC by barriers, to make sure it's not
-		 * speculated to outside the seqlock critical section and
-		 * does not cause time warps:
-		 */
-		rdtsc_barrier();
 		now = vread();
-		rdtsc_barrier();
-
 		base = __vsyscall_gtod_data.clock.cycle_last;
 		mask = __vsyscall_gtod_data.clock.mask;
 		mult = __vsyscall_gtod_data.clock.mult;
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index a58504ea78c..8600a09e0c6 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -50,6 +50,9 @@ config KVM_INTEL
 	  Provides support for KVM on Intel processors equipped with the VT
 	  extensions.
 
+	  To compile this as a module, choose M here: the module
+	  will be called kvm-intel.
+
 config KVM_AMD
 	tristate "KVM for AMD processors support"
 	depends on KVM
@@ -57,6 +60,9 @@ config KVM_AMD
 	  Provides support for KVM on AMD processors equipped with the AMD-V
 	  (SVM) extensions.
 
+	  To compile this as a module, choose M here: the module
+	  will be called kvm-amd.
+
 config KVM_TRACE
 	bool "KVM trace support"
 	depends on KVM && SYSFS
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index d3ec292f00f..b43c4efafe8 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -14,7 +14,7 @@ endif
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
 kvm-objs := $(common-objs) x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
-	i8254.o
+	i8254.o timer.o
 obj-$(CONFIG_KVM) += kvm.o
 kvm-intel-objs = vmx.o
 obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index c13bb92d315..4d6f0d293ee 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -98,6 +98,37 @@ static int pit_get_gate(struct kvm *kvm, int channel)
 	return kvm->arch.vpit->pit_state.channels[channel].gate;
 }
 
+static s64 __kpit_elapsed(struct kvm *kvm)
+{
+	s64 elapsed;
+	ktime_t remaining;
+	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
+
+	/*
+	 * The Counter does not stop when it reaches zero. In
+	 * Modes 0, 1, 4, and 5 the Counter ``wraps around'' to
+	 * the highest count, either FFFF hex for binary counting
+	 * or 9999 for BCD counting, and continues counting.
+	 * Modes 2 and 3 are periodic; the Counter reloads
+	 * itself with the initial count and continues counting
+	 * from there.
+	 */
+	remaining = hrtimer_expires_remaining(&ps->pit_timer.timer);
+	elapsed = ps->pit_timer.period - ktime_to_ns(remaining);
+	elapsed = mod_64(elapsed, ps->pit_timer.period);
+
+	return elapsed;
+}
+
+static s64 kpit_elapsed(struct kvm *kvm, struct kvm_kpit_channel_state *c,
+			int channel)
+{
+	if (channel == 0)
+		return __kpit_elapsed(kvm);
+
+	return ktime_to_ns(ktime_sub(ktime_get(), c->count_load_time));
+}
+
 static int pit_get_count(struct kvm *kvm, int channel)
 {
 	struct kvm_kpit_channel_state *c =
@@ -107,7 +138,7 @@ static int pit_get_count(struct kvm *kvm, int channel)
 
 	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
 
-	t = ktime_to_ns(ktime_sub(ktime_get(), c->count_load_time));
+	t = kpit_elapsed(kvm, c, channel);
 	d = muldiv64(t, KVM_PIT_FREQ, NSEC_PER_SEC);
 
 	switch (c->mode) {
@@ -137,7 +168,7 @@ static int pit_get_out(struct kvm *kvm, int channel)
 
 	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
 
-	t = ktime_to_ns(ktime_sub(ktime_get(), c->count_load_time));
+	t = kpit_elapsed(kvm, c, channel);
 	d = muldiv64(t, KVM_PIT_FREQ, NSEC_PER_SEC);
 
 	switch (c->mode) {
@@ -193,28 +224,6 @@ static void pit_latch_status(struct kvm *kvm, int channel)
 	}
 }
 
-static int __pit_timer_fn(struct kvm_kpit_state *ps)
-{
-	struct kvm_vcpu *vcpu0 = ps->pit->kvm->vcpus[0];
-	struct kvm_kpit_timer *pt = &ps->pit_timer;
-
-	if (!atomic_inc_and_test(&pt->pending))
-		set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
-
-	if (!pt->reinject)
-		atomic_set(&pt->pending, 1);
-
-	if (vcpu0 && waitqueue_active(&vcpu0->wq))
-		wake_up_interruptible(&vcpu0->wq);
-
-	hrtimer_add_expires_ns(&pt->timer, pt->period);
-	pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
-	if (pt->period)
-		ps->channels[0].count_load_time = ktime_get();
-
-	return (pt->period == 0 ? 0 : 1);
-}
-
 int pit_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
@@ -235,21 +244,6 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 	spin_unlock(&ps->inject_lock);
 }
 
-static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
-{
-	struct kvm_kpit_state *ps;
-	int restart_timer = 0;
-
-	ps = container_of(data, struct kvm_kpit_state, pit_timer.timer);
-
-	restart_timer = __pit_timer_fn(ps);
-
-	if (restart_timer)
-		return HRTIMER_RESTART;
-	else
-		return HRTIMER_NORESTART;
-}
-
 void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
@@ -263,15 +257,26 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
-static void destroy_pit_timer(struct kvm_kpit_timer *pt)
+static void destroy_pit_timer(struct kvm_timer *pt)
 {
 	pr_debug("pit: execute del timer!\n");
 	hrtimer_cancel(&pt->timer);
 }
 
+static bool kpit_is_periodic(struct kvm_timer *ktimer)
+{
+	struct kvm_kpit_state *ps = container_of(ktimer, struct kvm_kpit_state,
+						 pit_timer);
+	return ps->is_periodic;
+}
+
+static struct kvm_timer_ops kpit_ops = {
+	.is_periodic = kpit_is_periodic,
+};
+
 static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 {
-	struct kvm_kpit_timer *pt = &ps->pit_timer;
+	struct kvm_timer *pt = &ps->pit_timer;
 	s64 interval;
 
 	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
@@ -280,8 +285,14 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&pt->timer);
-	pt->period = (is_period == 0) ? 0 : interval;
-	pt->timer.function = pit_timer_fn;
+	pt->period = interval;
+	ps->is_periodic = is_period;
+
+	pt->timer.function = kvm_timer_fn;
+	pt->t_ops = &kpit_ops;
+	pt->kvm = ps->pit->kvm;
+	pt->vcpu_id = 0;
+
 	atomic_set(&pt->pending, 0);
 	ps->irq_ack = 1;
 
@@ -298,23 +309,23 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 	pr_debug("pit: load_count val is %d, channel is %d\n", val, channel);
 
 	/*
-	 * Though spec said the state of 8254 is undefined after power-up,
-	 * seems some tricky OS like Windows XP depends on IRQ0 interrupt
-	 * when booting up.
-	 * So here setting initialize rate for it, and not a specific number
+	 * The largest possible initial count is 0; this is equivalent
+	 * to 216 for binary counting and 104 for BCD counting.
 	 */
 	if (val == 0)
 		val = 0x10000;
 
-	ps->channels[channel].count_load_time = ktime_get();
 	ps->channels[channel].count = val;
 
-	if (channel != 0)
+	if (channel != 0) {
+		ps->channels[channel].count_load_time = ktime_get();
 		return;
+	}
 
 	/* Two types of timer
 	 * mode 1 is one shot, mode 2 is period, otherwise del timer */
 	switch (ps->channels[0].mode) {
+	case 0:
 	case 1:
         /* FIXME: enhance mode 4 precision */
 	case 4:
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index 6acbe4b505d..bbd863ff60b 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -3,15 +3,6 @@
 
 #include "iodev.h"
 
-struct kvm_kpit_timer {
-	struct hrtimer timer;
-	int irq;
-	s64 period; /* unit: ns */
-	s64 scheduled;
-	atomic_t pending;
-	bool reinject;
-};
-
 struct kvm_kpit_channel_state {
 	u32 count; /* can be 65536 */
 	u16 latched_count;
@@ -30,7 +21,8 @@ struct kvm_kpit_channel_state {
 
 struct kvm_kpit_state {
 	struct kvm_kpit_channel_state channels[3];
-	struct kvm_kpit_timer pit_timer;
+	struct kvm_timer pit_timer;
+	bool is_periodic;
 	u32    speaker_data_on;
 	struct mutex lock;
 	struct kvm_pit *pit;
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index cf17ed52f6f..96dfbb6ad2a 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -24,6 +24,7 @@
 
 #include "irq.h"
 #include "i8254.h"
+#include "x86.h"
 
 /*
  * check if there are pending timer events
@@ -48,6 +49,9 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
 {
 	struct kvm_pic *s;
 
+	if (!irqchip_in_kernel(v->kvm))
+		return v->arch.interrupt.pending;
+
 	if (kvm_apic_has_interrupt(v) == -1) {	/* LAPIC */
 		if (kvm_apic_accept_pic_intr(v)) {
 			s = pic_irqchip(v->kvm);	/* PIC */
@@ -67,6 +71,9 @@ int kvm_cpu_get_interrupt(struct kvm_vcpu *v)
 	struct kvm_pic *s;
 	int vector;
 
+	if (!irqchip_in_kernel(v->kvm))
+		return v->arch.interrupt.nr;
+
 	vector = kvm_get_apic_interrupt(v);	/* APIC */
 	if (vector == -1) {
 		if (kvm_apic_accept_pic_intr(v)) {
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
new file mode 100644
index 00000000000..26bd6ba74e1
--- /dev/null
+++ b/arch/x86/kvm/kvm_timer.h
@@ -0,0 +1,18 @@
+
+struct kvm_timer {
+	struct hrtimer timer;
+	s64 period; 				/* unit: ns */
+	atomic_t pending;			/* accumulated triggered timers */
+	bool reinject;
+	struct kvm_timer_ops *t_ops;
+	struct kvm *kvm;
+	int vcpu_id;
+};
+
+struct kvm_timer_ops {
+        bool (*is_periodic)(struct kvm_timer *);
+};
+
+
+enum hrtimer_restart kvm_timer_fn(struct hrtimer *data);
+
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index f0b67f2cdd6..ae99d83f81a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -196,20 +196,15 @@ int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_lapic_find_highest_irr);
 
-int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
+static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
+			     int vector, int level, int trig_mode);
+
+int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!apic_test_and_set_irr(vec, apic)) {
-		/* a new pending irq is set in IRR */
-		if (trig)
-			apic_set_vector(vec, apic->regs + APIC_TMR);
-		else
-			apic_clear_vector(vec, apic->regs + APIC_TMR);
-		kvm_vcpu_kick(apic->vcpu);
-		return 1;
-	}
-	return 0;
+	return __apic_accept_irq(apic, irq->delivery_mode, irq->vector,
+			irq->level, irq->trig_mode);
 }
 
 static inline int apic_find_highest_isr(struct kvm_lapic *apic)
@@ -250,7 +245,7 @@ static void apic_set_tpr(struct kvm_lapic *apic, u32 tpr)
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest)
 {
-	return kvm_apic_id(apic) == dest;
+	return dest == 0xff || kvm_apic_id(apic) == dest;
 }
 
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
@@ -279,37 +274,34 @@ int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 	return result;
 }
 
-static int apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
+int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
 			   int short_hand, int dest, int dest_mode)
 {
 	int result = 0;
 	struct kvm_lapic *target = vcpu->arch.apic;
 
 	apic_debug("target %p, source %p, dest 0x%x, "
-		   "dest_mode 0x%x, short_hand 0x%x",
+		   "dest_mode 0x%x, short_hand 0x%x\n",
 		   target, source, dest, dest_mode, short_hand);
 
 	ASSERT(!target);
 	switch (short_hand) {
 	case APIC_DEST_NOSHORT:
-		if (dest_mode == 0) {
+		if (dest_mode == 0)
 			/* Physical mode. */
-			if ((dest == 0xFF) || (dest == kvm_apic_id(target)))
-				result = 1;
-		} else
+			result = kvm_apic_match_physical_addr(target, dest);
+		else
 			/* Logical mode. */
 			result = kvm_apic_match_logical_addr(target, dest);
 		break;
 	case APIC_DEST_SELF:
-		if (target == source)
-			result = 1;
+		result = (target == source);
 		break;
 	case APIC_DEST_ALLINC:
 		result = 1;
 		break;
 	case APIC_DEST_ALLBUT:
-		if (target != source)
-			result = 1;
+		result = (target != source);
 		break;
 	default:
 		printk(KERN_WARNING "Bad dest shorthand value %x\n",
@@ -327,20 +319,22 @@ static int apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
 static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			     int vector, int level, int trig_mode)
 {
-	int orig_irr, result = 0;
+	int result = 0;
 	struct kvm_vcpu *vcpu = apic->vcpu;
 
 	switch (delivery_mode) {
-	case APIC_DM_FIXED:
 	case APIC_DM_LOWEST:
+		vcpu->arch.apic_arb_prio++;
+	case APIC_DM_FIXED:
 		/* FIXME add logic for vcpu on reset */
 		if (unlikely(!apic_enabled(apic)))
 			break;
 
-		orig_irr = apic_test_and_set_irr(vector, apic);
-		if (orig_irr && trig_mode) {
-			apic_debug("level trig mode repeatedly for vector %d",
-				   vector);
+		result = !apic_test_and_set_irr(vector, apic);
+		if (!result) {
+			if (trig_mode)
+				apic_debug("level trig mode repeatedly for "
+						"vector %d", vector);
 			break;
 		}
 
@@ -349,10 +343,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			apic_set_vector(vector, apic->regs + APIC_TMR);
 		} else
 			apic_clear_vector(vector, apic->regs + APIC_TMR);
-
 		kvm_vcpu_kick(vcpu);
-
-		result = (orig_irr == 0);
 		break;
 
 	case APIC_DM_REMRD:
@@ -364,12 +355,14 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 		break;
 
 	case APIC_DM_NMI:
+		result = 1;
 		kvm_inject_nmi(vcpu);
 		kvm_vcpu_kick(vcpu);
 		break;
 
 	case APIC_DM_INIT:
 		if (level) {
+			result = 1;
 			if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
 				printk(KERN_DEBUG
 				       "INIT on a runnable vcpu %d\n",
@@ -386,6 +379,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 		apic_debug("SIPI to vcpu %d vector 0x%02x\n",
 			   vcpu->vcpu_id, vector);
 		if (vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) {
+			result = 1;
 			vcpu->arch.sipi_vector = vector;
 			vcpu->arch.mp_state = KVM_MP_STATE_SIPI_RECEIVED;
 			kvm_vcpu_kick(vcpu);
@@ -408,43 +402,9 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 	return result;
 }
 
-static struct kvm_lapic *kvm_apic_round_robin(struct kvm *kvm, u8 vector,
-				       unsigned long bitmap)
-{
-	int last;
-	int next;
-	struct kvm_lapic *apic = NULL;
-
-	last = kvm->arch.round_robin_prev_vcpu;
-	next = last;
-
-	do {
-		if (++next == KVM_MAX_VCPUS)
-			next = 0;
-		if (kvm->vcpus[next] == NULL || !test_bit(next, &bitmap))
-			continue;
-		apic = kvm->vcpus[next]->arch.apic;
-		if (apic && apic_enabled(apic))
-			break;
-		apic = NULL;
-	} while (next != last);
-	kvm->arch.round_robin_prev_vcpu = next;
-
-	if (!apic)
-		printk(KERN_DEBUG "vcpu not ready for apic_round_robin\n");
-
-	return apic;
-}
-
-struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector,
-		unsigned long bitmap)
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2)
 {
-	struct kvm_lapic *apic;
-
-	apic = kvm_apic_round_robin(kvm, vector, bitmap);
-	if (apic)
-		return apic->vcpu;
-	return NULL;
+	return vcpu1->arch.apic_arb_prio - vcpu2->arch.apic_arb_prio;
 }
 
 static void apic_set_eoi(struct kvm_lapic *apic)
@@ -472,47 +432,24 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 {
 	u32 icr_low = apic_get_reg(apic, APIC_ICR);
 	u32 icr_high = apic_get_reg(apic, APIC_ICR2);
+	struct kvm_lapic_irq irq;
 
-	unsigned int dest = GET_APIC_DEST_FIELD(icr_high);
-	unsigned int short_hand = icr_low & APIC_SHORT_MASK;
-	unsigned int trig_mode = icr_low & APIC_INT_LEVELTRIG;
-	unsigned int level = icr_low & APIC_INT_ASSERT;
-	unsigned int dest_mode = icr_low & APIC_DEST_MASK;
-	unsigned int delivery_mode = icr_low & APIC_MODE_MASK;
-	unsigned int vector = icr_low & APIC_VECTOR_MASK;
-
-	struct kvm_vcpu *target;
-	struct kvm_vcpu *vcpu;
-	unsigned long lpr_map = 0;
-	int i;
+	irq.vector = icr_low & APIC_VECTOR_MASK;
+	irq.delivery_mode = icr_low & APIC_MODE_MASK;
+	irq.dest_mode = icr_low & APIC_DEST_MASK;
+	irq.level = icr_low & APIC_INT_ASSERT;
+	irq.trig_mode = icr_low & APIC_INT_LEVELTRIG;
+	irq.shorthand = icr_low & APIC_SHORT_MASK;
+	irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
 
 	apic_debug("icr_high 0x%x, icr_low 0x%x, "
 		   "short_hand 0x%x, dest 0x%x, trig_mode 0x%x, level 0x%x, "
 		   "dest_mode 0x%x, delivery_mode 0x%x, vector 0x%x\n",
-		   icr_high, icr_low, short_hand, dest,
-		   trig_mode, level, dest_mode, delivery_mode, vector);
-
-	for (i = 0; i < KVM_MAX_VCPUS; i++) {
-		vcpu = apic->vcpu->kvm->vcpus[i];
-		if (!vcpu)
-			continue;
-
-		if (vcpu->arch.apic &&
-		    apic_match_dest(vcpu, apic, short_hand, dest, dest_mode)) {
-			if (delivery_mode == APIC_DM_LOWEST)
-				set_bit(vcpu->vcpu_id, &lpr_map);
-			else
-				__apic_accept_irq(vcpu->arch.apic, delivery_mode,
-						  vector, level, trig_mode);
-		}
-	}
+		   icr_high, icr_low, irq.shorthand, irq.dest_id,
+		   irq.trig_mode, irq.level, irq.dest_mode, irq.delivery_mode,
+		   irq.vector);
 
-	if (delivery_mode == APIC_DM_LOWEST) {
-		target = kvm_get_lowest_prio_vcpu(vcpu->kvm, vector, lpr_map);
-		if (target != NULL)
-			__apic_accept_irq(target->arch.apic, delivery_mode,
-					  vector, level, trig_mode);
-	}
+	kvm_irq_delivery_to_apic(apic->vcpu->kvm, apic, &irq);
 }
 
 static u32 apic_get_tmcct(struct kvm_lapic *apic)
@@ -527,12 +464,13 @@ static u32 apic_get_tmcct(struct kvm_lapic *apic)
 	if (apic_get_reg(apic, APIC_TMICT) == 0)
 		return 0;
 
-	remaining = hrtimer_expires_remaining(&apic->timer.dev);
+	remaining = hrtimer_expires_remaining(&apic->lapic_timer.timer);
 	if (ktime_to_ns(remaining) < 0)
 		remaining = ktime_set(0, 0);
 
-	ns = mod_64(ktime_to_ns(remaining), apic->timer.period);
-	tmcct = div64_u64(ns, (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
+	ns = mod_64(ktime_to_ns(remaining), apic->lapic_timer.period);
+	tmcct = div64_u64(ns,
+			 (APIC_BUS_CYCLE_NS * apic->divide_count));
 
 	return tmcct;
 }
@@ -619,25 +557,25 @@ static void update_divide_count(struct kvm_lapic *apic)
 	tdcr = apic_get_reg(apic, APIC_TDCR);
 	tmp1 = tdcr & 0xf;
 	tmp2 = ((tmp1 & 0x3) | ((tmp1 & 0x8) >> 1)) + 1;
-	apic->timer.divide_count = 0x1 << (tmp2 & 0x7);
+	apic->divide_count = 0x1 << (tmp2 & 0x7);
 
 	apic_debug("timer divide count is 0x%x\n",
-				   apic->timer.divide_count);
+				   apic->divide_count);
 }
 
 static void start_apic_timer(struct kvm_lapic *apic)
 {
-	ktime_t now = apic->timer.dev.base->get_time();
+	ktime_t now = apic->lapic_timer.timer.base->get_time();
 
-	apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
-		    APIC_BUS_CYCLE_NS * apic->timer.divide_count;
-	atomic_set(&apic->timer.pending, 0);
+	apic->lapic_timer.period = apic_get_reg(apic, APIC_TMICT) *
+		    APIC_BUS_CYCLE_NS * apic->divide_count;
+	atomic_set(&apic->lapic_timer.pending, 0);
 
-	if (!apic->timer.period)
+	if (!apic->lapic_timer.period)
 		return;
 
-	hrtimer_start(&apic->timer.dev,
-		      ktime_add_ns(now, apic->timer.period),
+	hrtimer_start(&apic->lapic_timer.timer,
+		      ktime_add_ns(now, apic->lapic_timer.period),
 		      HRTIMER_MODE_ABS);
 
 	apic_debug("%s: bus cycle is %" PRId64 "ns, now 0x%016"
@@ -646,9 +584,9 @@ static void start_apic_timer(struct kvm_lapic *apic)
 			   "expire @ 0x%016" PRIx64 ".\n", __func__,
 			   APIC_BUS_CYCLE_NS, ktime_to_ns(now),
 			   apic_get_reg(apic, APIC_TMICT),
-			   apic->timer.period,
+			   apic->lapic_timer.period,
 			   ktime_to_ns(ktime_add_ns(now,
-					apic->timer.period)));
+					apic->lapic_timer.period)));
 }
 
 static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
@@ -730,7 +668,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 				apic_set_reg(apic, APIC_LVTT + 0x10 * i,
 					     lvt_val | APIC_LVT_MASKED);
 			}
-			atomic_set(&apic->timer.pending, 0);
+			atomic_set(&apic->lapic_timer.pending, 0);
 
 		}
 		break;
@@ -762,7 +700,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 		break;
 
 	case APIC_TMICT:
-		hrtimer_cancel(&apic->timer.dev);
+		hrtimer_cancel(&apic->lapic_timer.timer);
 		apic_set_reg(apic, APIC_TMICT, val);
 		start_apic_timer(apic);
 		return;
@@ -802,7 +740,7 @@ void kvm_free_lapic(struct kvm_vcpu *vcpu)
 	if (!vcpu->arch.apic)
 		return;
 
-	hrtimer_cancel(&vcpu->arch.apic->timer.dev);
+	hrtimer_cancel(&vcpu->arch.apic->lapic_timer.timer);
 
 	if (vcpu->arch.apic->regs_page)
 		__free_page(vcpu->arch.apic->regs_page);
@@ -880,7 +818,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	ASSERT(apic != NULL);
 
 	/* Stop the timer in case it's a reset to an active apic */
-	hrtimer_cancel(&apic->timer.dev);
+	hrtimer_cancel(&apic->lapic_timer.timer);
 
 	apic_set_reg(apic, APIC_ID, vcpu->vcpu_id << 24);
 	apic_set_reg(apic, APIC_LVR, APIC_VERSION);
@@ -905,11 +843,13 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		apic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
 	}
 	update_divide_count(apic);
-	atomic_set(&apic->timer.pending, 0);
+	atomic_set(&apic->lapic_timer.pending, 0);
 	if (vcpu->vcpu_id == 0)
 		vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
 	apic_update_ppr(apic);
 
+	vcpu->arch.apic_arb_prio = 0;
+
 	apic_debug(KERN_INFO "%s: vcpu=%p, id=%d, base_msr="
 		   "0x%016" PRIx64 ", base_address=0x%0lx.\n", __func__,
 		   vcpu, kvm_apic_id(apic),
@@ -917,16 +857,14 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_lapic_reset);
 
-int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
+bool kvm_apic_present(struct kvm_vcpu *vcpu)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
-	int ret = 0;
-
-	if (!apic)
-		return 0;
-	ret = apic_enabled(apic);
+	return vcpu->arch.apic && apic_hw_enabled(vcpu->arch.apic);
+}
 
-	return ret;
+int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
+{
+	return kvm_apic_present(vcpu) && apic_sw_enabled(vcpu->arch.apic);
 }
 EXPORT_SYMBOL_GPL(kvm_lapic_enabled);
 
@@ -936,22 +874,11 @@ EXPORT_SYMBOL_GPL(kvm_lapic_enabled);
  *----------------------------------------------------------------------
  */
 
-/* TODO: make sure __apic_timer_fn runs in current pCPU */
-static int __apic_timer_fn(struct kvm_lapic *apic)
+static bool lapic_is_periodic(struct kvm_timer *ktimer)
 {
-	int result = 0;
-	wait_queue_head_t *q = &apic->vcpu->wq;
-
-	if(!atomic_inc_and_test(&apic->timer.pending))
-		set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
-	if (waitqueue_active(q))
-		wake_up_interruptible(q);
-
-	if (apic_lvtt_period(apic)) {
-		result = 1;
-		hrtimer_add_expires_ns(&apic->timer.dev, apic->timer.period);
-	}
-	return result;
+	struct kvm_lapic *apic = container_of(ktimer, struct kvm_lapic,
+					      lapic_timer);
+	return apic_lvtt_period(apic);
 }
 
 int apic_has_pending_timer(struct kvm_vcpu *vcpu)
@@ -959,7 +886,7 @@ int apic_has_pending_timer(struct kvm_vcpu *vcpu)
 	struct kvm_lapic *lapic = vcpu->arch.apic;
 
 	if (lapic && apic_enabled(lapic) && apic_lvt_enabled(lapic, APIC_LVTT))
-		return atomic_read(&lapic->timer.pending);
+		return atomic_read(&lapic->lapic_timer.pending);
 
 	return 0;
 }
@@ -986,20 +913,9 @@ void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu)
 		kvm_apic_local_deliver(apic, APIC_LVT0);
 }
 
-static enum hrtimer_restart apic_timer_fn(struct hrtimer *data)
-{
-	struct kvm_lapic *apic;
-	int restart_timer = 0;
-
-	apic = container_of(data, struct kvm_lapic, timer.dev);
-
-	restart_timer = __apic_timer_fn(apic);
-
-	if (restart_timer)
-		return HRTIMER_RESTART;
-	else
-		return HRTIMER_NORESTART;
-}
+static struct kvm_timer_ops lapic_timer_ops = {
+	.is_periodic = lapic_is_periodic,
+};
 
 int kvm_create_lapic(struct kvm_vcpu *vcpu)
 {
@@ -1024,8 +940,13 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 	memset(apic->regs, 0, PAGE_SIZE);
 	apic->vcpu = vcpu;
 
-	hrtimer_init(&apic->timer.dev, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
-	apic->timer.dev.function = apic_timer_fn;
+	hrtimer_init(&apic->lapic_timer.timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_ABS);
+	apic->lapic_timer.timer.function = kvm_timer_fn;
+	apic->lapic_timer.t_ops = &lapic_timer_ops;
+	apic->lapic_timer.kvm = vcpu->kvm;
+	apic->lapic_timer.vcpu_id = vcpu->vcpu_id;
+
 	apic->base_address = APIC_DEFAULT_PHYS_BASE;
 	vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
 
@@ -1078,9 +999,9 @@ void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (apic && atomic_read(&apic->timer.pending) > 0) {
+	if (apic && atomic_read(&apic->lapic_timer.pending) > 0) {
 		if (kvm_apic_local_deliver(apic, APIC_LVTT))
-			atomic_dec(&apic->timer.pending);
+			atomic_dec(&apic->lapic_timer.pending);
 	}
 }
 
@@ -1106,7 +1027,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu)
 			     MSR_IA32_APICBASE_BASE;
 	apic_set_reg(apic, APIC_LVR, APIC_VERSION);
 	apic_update_ppr(apic);
-	hrtimer_cancel(&apic->timer.dev);
+	hrtimer_cancel(&apic->lapic_timer.timer);
 	update_divide_count(apic);
 	start_apic_timer(apic);
 }
@@ -1119,7 +1040,7 @@ void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
 	if (!apic)
 		return;
 
-	timer = &apic->timer.dev;
+	timer = &apic->lapic_timer.timer;
 	if (hrtimer_cancel(timer))
 		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 45ab6ee7120..a587f8349c4 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -2,18 +2,15 @@
 #define __KVM_X86_LAPIC_H
 
 #include "iodev.h"
+#include "kvm_timer.h"
 
 #include <linux/kvm_host.h>
 
 struct kvm_lapic {
 	unsigned long base_address;
 	struct kvm_io_device dev;
-	struct {
-		atomic_t pending;
-		s64 period;	/* unit: ns */
-		u32 divide_count;
-		struct hrtimer dev;
-	} timer;
+	struct kvm_timer lapic_timer;
+	u32 divide_count;
 	struct kvm_vcpu *vcpu;
 	struct page *regs_page;
 	void *regs;
@@ -34,12 +31,13 @@ u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
-int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig);
+int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq);
 
 u64 kvm_get_apic_base(struct kvm_vcpu *vcpu);
 void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data);
 void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
 int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
+bool kvm_apic_present(struct kvm_vcpu *vcpu);
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
 
 void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b6caf1329b1..5c3d6e81a7d 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -126,6 +126,7 @@ module_param(oos_shadow, bool, 0644);
 #define PFERR_PRESENT_MASK (1U << 0)
 #define PFERR_WRITE_MASK (1U << 1)
 #define PFERR_USER_MASK (1U << 2)
+#define PFERR_RSVD_MASK (1U << 3)
 #define PFERR_FETCH_MASK (1U << 4)
 
 #define PT_DIRECTORY_LEVEL 2
@@ -177,7 +178,11 @@ static u64 __read_mostly shadow_x_mask;	/* mutual exclusive with nx_mask */
 static u64 __read_mostly shadow_user_mask;
 static u64 __read_mostly shadow_accessed_mask;
 static u64 __read_mostly shadow_dirty_mask;
-static u64 __read_mostly shadow_mt_mask;
+
+static inline u64 rsvd_bits(int s, int e)
+{
+	return ((1ULL << (e - s + 1)) - 1) << s;
+}
 
 void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte)
 {
@@ -193,14 +198,13 @@ void kvm_mmu_set_base_ptes(u64 base_pte)
 EXPORT_SYMBOL_GPL(kvm_mmu_set_base_ptes);
 
 void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
-		u64 dirty_mask, u64 nx_mask, u64 x_mask, u64 mt_mask)
+		u64 dirty_mask, u64 nx_mask, u64 x_mask)
 {
 	shadow_user_mask = user_mask;
 	shadow_accessed_mask = accessed_mask;
 	shadow_dirty_mask = dirty_mask;
 	shadow_nx_mask = nx_mask;
 	shadow_x_mask = x_mask;
-	shadow_mt_mask = mt_mask;
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes);
 
@@ -219,11 +223,6 @@ static int is_nx(struct kvm_vcpu *vcpu)
 	return vcpu->arch.shadow_efer & EFER_NX;
 }
 
-static int is_present_pte(unsigned long pte)
-{
-	return pte & PT_PRESENT_MASK;
-}
-
 static int is_shadow_present_pte(u64 pte)
 {
 	return pte != shadow_trap_nonpresent_pte
@@ -1074,18 +1073,10 @@ static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 	return NULL;
 }
 
-static void kvm_unlink_unsync_global(struct kvm *kvm, struct kvm_mmu_page *sp)
-{
-	list_del(&sp->oos_link);
-	--kvm->stat.mmu_unsync_global;
-}
-
 static void kvm_unlink_unsync_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	WARN_ON(!sp->unsync);
 	sp->unsync = 0;
-	if (sp->global)
-		kvm_unlink_unsync_global(kvm, sp);
 	--kvm->stat.mmu_unsync;
 }
 
@@ -1248,7 +1239,6 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
 	sp->gfn = gfn;
 	sp->role = role;
-	sp->global = 0;
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!direct) {
 		if (rmap_write_protect(vcpu->kvm, gfn))
@@ -1616,7 +1606,7 @@ static int get_mtrr_type(struct mtrr_state_type *mtrr_state,
 	return mtrr_state->def_type;
 }
 
-static u8 get_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn)
+u8 kvm_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn)
 {
 	u8 mtrr;
 
@@ -1626,6 +1616,7 @@ static u8 get_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn)
 		mtrr = MTRR_TYPE_WRBACK;
 	return mtrr;
 }
+EXPORT_SYMBOL_GPL(kvm_get_guest_memory_type);
 
 static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
@@ -1646,11 +1637,7 @@ static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	++vcpu->kvm->stat.mmu_unsync;
 	sp->unsync = 1;
 
-	if (sp->global) {
-		list_add(&sp->oos_link, &vcpu->kvm->arch.oos_global_pages);
-		++vcpu->kvm->stat.mmu_unsync_global;
-	} else
-		kvm_mmu_mark_parents_unsync(vcpu, sp);
+	kvm_mmu_mark_parents_unsync(vcpu, sp);
 
 	mmu_convert_notrap(sp);
 	return 0;
@@ -1677,21 +1664,11 @@ static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
 static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		    unsigned pte_access, int user_fault,
 		    int write_fault, int dirty, int largepage,
-		    int global, gfn_t gfn, pfn_t pfn, bool speculative,
+		    gfn_t gfn, pfn_t pfn, bool speculative,
 		    bool can_unsync)
 {
 	u64 spte;
 	int ret = 0;
-	u64 mt_mask = shadow_mt_mask;
-	struct kvm_mmu_page *sp = page_header(__pa(shadow_pte));
-
-	if (!global && sp->global) {
-		sp->global = 0;
-		if (sp->unsync) {
-			kvm_unlink_unsync_global(vcpu->kvm, sp);
-			kvm_mmu_mark_parents_unsync(vcpu, sp);
-		}
-	}
 
 	/*
 	 * We don't set the accessed bit, since we sometimes want to see
@@ -1711,16 +1688,9 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		spte |= shadow_user_mask;
 	if (largepage)
 		spte |= PT_PAGE_SIZE_MASK;
-	if (mt_mask) {
-		if (!kvm_is_mmio_pfn(pfn)) {
-			mt_mask = get_memory_type(vcpu, gfn) <<
-				kvm_x86_ops->get_mt_mask_shift();
-			mt_mask |= VMX_EPT_IGMT_BIT;
-		} else
-			mt_mask = MTRR_TYPE_UNCACHABLE <<
-				kvm_x86_ops->get_mt_mask_shift();
-		spte |= mt_mask;
-	}
+	if (tdp_enabled)
+		spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
+			kvm_is_mmio_pfn(pfn));
 
 	spte |= (u64)pfn << PAGE_SHIFT;
 
@@ -1765,8 +1735,8 @@ set_pte:
 static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 			 unsigned pt_access, unsigned pte_access,
 			 int user_fault, int write_fault, int dirty,
-			 int *ptwrite, int largepage, int global,
-			 gfn_t gfn, pfn_t pfn, bool speculative)
+			 int *ptwrite, int largepage, gfn_t gfn,
+			 pfn_t pfn, bool speculative)
 {
 	int was_rmapped = 0;
 	int was_writeble = is_writeble_pte(*shadow_pte);
@@ -1795,7 +1765,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 			was_rmapped = 1;
 	}
 	if (set_spte(vcpu, shadow_pte, pte_access, user_fault, write_fault,
-		      dirty, largepage, global, gfn, pfn, speculative, true)) {
+		      dirty, largepage, gfn, pfn, speculative, true)) {
 		if (write_fault)
 			*ptwrite = 1;
 		kvm_x86_ops->tlb_flush(vcpu);
@@ -1843,7 +1813,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 		    || (largepage && iterator.level == PT_DIRECTORY_LEVEL)) {
 			mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
 				     0, write, 1, &pt_write,
-				     largepage, 0, gfn, pfn, false);
+				     largepage, gfn, pfn, false);
 			++vcpu->stat.pf_fixed;
 			break;
 		}
@@ -1942,7 +1912,19 @@ static void mmu_free_roots(struct kvm_vcpu *vcpu)
 	vcpu->arch.mmu.root_hpa = INVALID_PAGE;
 }
 
-static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
+static int mmu_check_root(struct kvm_vcpu *vcpu, gfn_t root_gfn)
+{
+	int ret = 0;
+
+	if (!kvm_is_visible_gfn(vcpu->kvm, root_gfn)) {
+		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 {
 	int i;
 	gfn_t root_gfn;
@@ -1957,13 +1939,15 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 		ASSERT(!VALID_PAGE(root));
 		if (tdp_enabled)
 			direct = 1;
+		if (mmu_check_root(vcpu, root_gfn))
+			return 1;
 		sp = kvm_mmu_get_page(vcpu, root_gfn, 0,
 				      PT64_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
 		vcpu->arch.mmu.root_hpa = root;
-		return;
+		return 0;
 	}
 	direct = !is_paging(vcpu);
 	if (tdp_enabled)
@@ -1980,6 +1964,8 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 			root_gfn = vcpu->arch.pdptrs[i] >> PAGE_SHIFT;
 		} else if (vcpu->arch.mmu.root_level == 0)
 			root_gfn = 0;
+		if (mmu_check_root(vcpu, root_gfn))
+			return 1;
 		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
 				      PT32_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
@@ -1988,6 +1974,7 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 		vcpu->arch.mmu.pae_root[i] = root | PT_PRESENT_MASK;
 	}
 	vcpu->arch.mmu.root_hpa = __pa(vcpu->arch.mmu.pae_root);
+	return 0;
 }
 
 static void mmu_sync_roots(struct kvm_vcpu *vcpu)
@@ -2006,7 +1993,7 @@ static void mmu_sync_roots(struct kvm_vcpu *vcpu)
 	for (i = 0; i < 4; ++i) {
 		hpa_t root = vcpu->arch.mmu.pae_root[i];
 
-		if (root) {
+		if (root && VALID_PAGE(root)) {
 			root &= PT64_BASE_ADDR_MASK;
 			sp = page_header(root);
 			mmu_sync_children(vcpu, sp);
@@ -2014,15 +2001,6 @@ static void mmu_sync_roots(struct kvm_vcpu *vcpu)
 	}
 }
 
-static void mmu_sync_global(struct kvm_vcpu *vcpu)
-{
-	struct kvm *kvm = vcpu->kvm;
-	struct kvm_mmu_page *sp, *n;
-
-	list_for_each_entry_safe(sp, n, &kvm->arch.oos_global_pages, oos_link)
-		kvm_sync_page(vcpu, sp);
-}
-
 void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
 {
 	spin_lock(&vcpu->kvm->mmu_lock);
@@ -2030,13 +2008,6 @@ void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 }
 
-void kvm_mmu_sync_global(struct kvm_vcpu *vcpu)
-{
-	spin_lock(&vcpu->kvm->mmu_lock);
-	mmu_sync_global(vcpu);
-	spin_unlock(&vcpu->kvm->mmu_lock);
-}
-
 static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr)
 {
 	return vaddr;
@@ -2151,6 +2122,14 @@ static void paging_free(struct kvm_vcpu *vcpu)
 	nonpaging_free(vcpu);
 }
 
+static bool is_rsvd_bits_set(struct kvm_vcpu *vcpu, u64 gpte, int level)
+{
+	int bit7;
+
+	bit7 = (gpte >> 7) & 1;
+	return (gpte & vcpu->arch.mmu.rsvd_bits_mask[bit7][level-1]) != 0;
+}
+
 #define PTTYPE 64
 #include "paging_tmpl.h"
 #undef PTTYPE
@@ -2159,6 +2138,59 @@ static void paging_free(struct kvm_vcpu *vcpu)
 #include "paging_tmpl.h"
 #undef PTTYPE
 
+static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
+{
+	struct kvm_mmu *context = &vcpu->arch.mmu;
+	int maxphyaddr = cpuid_maxphyaddr(vcpu);
+	u64 exb_bit_rsvd = 0;
+
+	if (!is_nx(vcpu))
+		exb_bit_rsvd = rsvd_bits(63, 63);
+	switch (level) {
+	case PT32_ROOT_LEVEL:
+		/* no rsvd bits for 2 level 4K page table entries */
+		context->rsvd_bits_mask[0][1] = 0;
+		context->rsvd_bits_mask[0][0] = 0;
+		if (is_cpuid_PSE36())
+			/* 36bits PSE 4MB page */
+			context->rsvd_bits_mask[1][1] = rsvd_bits(17, 21);
+		else
+			/* 32 bits PSE 4MB page */
+			context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
+		context->rsvd_bits_mask[1][0] = ~0ull;
+		break;
+	case PT32E_ROOT_LEVEL:
+		context->rsvd_bits_mask[0][2] =
+			rsvd_bits(maxphyaddr, 63) |
+			rsvd_bits(7, 8) | rsvd_bits(1, 2);	/* PDPTE */
+		context->rsvd_bits_mask[0][1] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 62);	/* PDE */
+		context->rsvd_bits_mask[0][0] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 62); 	/* PTE */
+		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 62) |
+			rsvd_bits(13, 20);		/* large page */
+		context->rsvd_bits_mask[1][0] = ~0ull;
+		break;
+	case PT64_ROOT_LEVEL:
+		context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51) | rsvd_bits(7, 8);
+		context->rsvd_bits_mask[0][2] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51) | rsvd_bits(7, 8);
+		context->rsvd_bits_mask[0][1] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51);
+		context->rsvd_bits_mask[0][0] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51);
+		context->rsvd_bits_mask[1][3] = context->rsvd_bits_mask[0][3];
+		context->rsvd_bits_mask[1][2] = context->rsvd_bits_mask[0][2];
+		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51) |
+			rsvd_bits(13, 20);		/* large page */
+		context->rsvd_bits_mask[1][0] = ~0ull;
+		break;
+	}
+}
+
 static int paging64_init_context_common(struct kvm_vcpu *vcpu, int level)
 {
 	struct kvm_mmu *context = &vcpu->arch.mmu;
@@ -2179,6 +2211,7 @@ static int paging64_init_context_common(struct kvm_vcpu *vcpu, int level)
 
 static int paging64_init_context(struct kvm_vcpu *vcpu)
 {
+	reset_rsvds_bits_mask(vcpu, PT64_ROOT_LEVEL);
 	return paging64_init_context_common(vcpu, PT64_ROOT_LEVEL);
 }
 
@@ -2186,6 +2219,7 @@ static int paging32_init_context(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu *context = &vcpu->arch.mmu;
 
+	reset_rsvds_bits_mask(vcpu, PT32_ROOT_LEVEL);
 	context->new_cr3 = paging_new_cr3;
 	context->page_fault = paging32_page_fault;
 	context->gva_to_gpa = paging32_gva_to_gpa;
@@ -2201,6 +2235,7 @@ static int paging32_init_context(struct kvm_vcpu *vcpu)
 
 static int paging32E_init_context(struct kvm_vcpu *vcpu)
 {
+	reset_rsvds_bits_mask(vcpu, PT32E_ROOT_LEVEL);
 	return paging64_init_context_common(vcpu, PT32E_ROOT_LEVEL);
 }
 
@@ -2221,12 +2256,15 @@ static int init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 		context->gva_to_gpa = nonpaging_gva_to_gpa;
 		context->root_level = 0;
 	} else if (is_long_mode(vcpu)) {
+		reset_rsvds_bits_mask(vcpu, PT64_ROOT_LEVEL);
 		context->gva_to_gpa = paging64_gva_to_gpa;
 		context->root_level = PT64_ROOT_LEVEL;
 	} else if (is_pae(vcpu)) {
+		reset_rsvds_bits_mask(vcpu, PT32E_ROOT_LEVEL);
 		context->gva_to_gpa = paging64_gva_to_gpa;
 		context->root_level = PT32E_ROOT_LEVEL;
 	} else {
+		reset_rsvds_bits_mask(vcpu, PT32_ROOT_LEVEL);
 		context->gva_to_gpa = paging32_gva_to_gpa;
 		context->root_level = PT32_ROOT_LEVEL;
 	}
@@ -2290,9 +2328,11 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 		goto out;
 	spin_lock(&vcpu->kvm->mmu_lock);
 	kvm_mmu_free_some_pages(vcpu);
-	mmu_alloc_roots(vcpu);
+	r = mmu_alloc_roots(vcpu);
 	mmu_sync_roots(vcpu);
 	spin_unlock(&vcpu->kvm->mmu_lock);
+	if (r)
+		goto out;
 	kvm_x86_ops->set_cr3(vcpu, vcpu->arch.mmu.root_hpa);
 	kvm_mmu_flush_tlb(vcpu);
 out:
@@ -2638,14 +2678,6 @@ EXPORT_SYMBOL_GPL(kvm_disable_tdp);
 
 static void free_mmu_pages(struct kvm_vcpu *vcpu)
 {
-	struct kvm_mmu_page *sp;
-
-	while (!list_empty(&vcpu->kvm->arch.active_mmu_pages)) {
-		sp = container_of(vcpu->kvm->arch.active_mmu_pages.next,
-				  struct kvm_mmu_page, link);
-		kvm_mmu_zap_page(vcpu->kvm, sp);
-		cond_resched();
-	}
 	free_page((unsigned long)vcpu->arch.mmu.pae_root);
 }
 
@@ -2710,7 +2742,6 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
 {
 	struct kvm_mmu_page *sp;
 
-	spin_lock(&kvm->mmu_lock);
 	list_for_each_entry(sp, &kvm->arch.active_mmu_pages, link) {
 		int i;
 		u64 *pt;
@@ -2725,7 +2756,6 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
 				pt[i] &= ~PT_WRITABLE_MASK;
 	}
 	kvm_flush_remote_tlbs(kvm);
-	spin_unlock(&kvm->mmu_lock);
 }
 
 void kvm_mmu_zap_all(struct kvm *kvm)
@@ -2897,8 +2927,7 @@ static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu,
 
 static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 {
-	kvm_x86_ops->tlb_flush(vcpu);
-	set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
+	kvm_set_cr3(vcpu, vcpu->arch.cr3);
 	return 1;
 }
 
@@ -3008,11 +3037,13 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 				       " in nonleaf level: levels %d gva %lx"
 				       " level %d pte %llx\n", audit_msg,
 				       vcpu->arch.mmu.root_level, va, level, ent);
-
-			audit_mappings_page(vcpu, ent, va, level - 1);
+			else
+				audit_mappings_page(vcpu, ent, va, level - 1);
 		} else {
 			gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
-			hpa_t hpa = (hpa_t)gpa_to_pfn(vcpu, gpa) << PAGE_SHIFT;
+			gfn_t gfn = gpa >> PAGE_SHIFT;
+			pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
+			hpa_t hpa = (hpa_t)pfn << PAGE_SHIFT;
 
 			if (is_shadow_present_pte(ent)
 			    && (ent & PT64_BASE_ADDR_MASK) != hpa)
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index eaab2145f62..3494a2fb136 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -75,4 +75,9 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
 	return vcpu->arch.cr0 & X86_CR0_PG;
 }
 
+static inline int is_present_pte(unsigned long pte)
+{
+	return pte & PT_PRESENT_MASK;
+}
+
 #endif
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 6bd70206c56..258e4591e1c 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -123,6 +123,7 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
 	gfn_t table_gfn;
 	unsigned index, pt_access, pte_access;
 	gpa_t pte_gpa;
+	int rsvd_fault = 0;
 
 	pgprintk("%s: addr %lx\n", __func__, addr);
 walk:
@@ -157,6 +158,10 @@ walk:
 		if (!is_present_pte(pte))
 			goto not_present;
 
+		rsvd_fault = is_rsvd_bits_set(vcpu, pte, walker->level);
+		if (rsvd_fault)
+			goto access_error;
+
 		if (write_fault && !is_writeble_pte(pte))
 			if (user_fault || is_write_protection(vcpu))
 				goto access_error;
@@ -209,7 +214,6 @@ walk:
 		if (ret)
 			goto walk;
 		pte |= PT_DIRTY_MASK;
-		kvm_mmu_pte_write(vcpu, pte_gpa, (u8 *)&pte, sizeof(pte), 0);
 		walker->ptes[walker->level - 1] = pte;
 	}
 
@@ -233,6 +237,8 @@ err:
 		walker->error_code |= PFERR_USER_MASK;
 	if (fetch_fault)
 		walker->error_code |= PFERR_FETCH_MASK;
+	if (rsvd_fault)
+		walker->error_code |= PFERR_RSVD_MASK;
 	return 0;
 }
 
@@ -262,8 +268,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
 		     gpte & PT_DIRTY_MASK, NULL, largepage,
-		     gpte & PT_GLOBAL_MASK, gpte_to_gfn(gpte),
-		     pfn, true);
+		     gpte_to_gfn(gpte), pfn, true);
 }
 
 /*
@@ -297,7 +302,6 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 				     user_fault, write_fault,
 				     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
 				     ptwrite, largepage,
-				     gw->ptes[gw->level-1] & PT_GLOBAL_MASK,
 				     gw->gfn, pfn, false);
 			break;
 		}
@@ -380,7 +384,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		return r;
 
 	/*
-	 * Look up the shadow pte for the faulting address.
+	 * Look up the guest pte for the faulting address.
 	 */
 	r = FNAME(walk_addr)(&walker, vcpu, addr, write_fault, user_fault,
 			     fetch_fault);
@@ -586,7 +590,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		nr_present++;
 		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
 		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
-			 is_dirty_pte(gpte), 0, gpte & PT_GLOBAL_MASK, gfn,
+			 is_dirty_pte(gpte), 0, gfn,
 			 spte_to_pfn(sp->spt[i]), true, false);
 	}
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1f8510c51d6..71510e07e69 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -19,6 +19,7 @@
 #include "irq.h"
 #include "mmu.h"
 #include "kvm_cache_regs.h"
+#include "x86.h"
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -69,7 +70,6 @@ module_param(npt, int, S_IRUGO);
 static int nested = 0;
 module_param(nested, int, S_IRUGO);
 
-static void kvm_reput_irq(struct vcpu_svm *svm);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
@@ -132,24 +132,6 @@ static inline u32 svm_has(u32 feat)
 	return svm_features & feat;
 }
 
-static inline u8 pop_irq(struct kvm_vcpu *vcpu)
-{
-	int word_index = __ffs(vcpu->arch.irq_summary);
-	int bit_index = __ffs(vcpu->arch.irq_pending[word_index]);
-	int irq = word_index * BITS_PER_LONG + bit_index;
-
-	clear_bit(bit_index, &vcpu->arch.irq_pending[word_index]);
-	if (!vcpu->arch.irq_pending[word_index])
-		clear_bit(word_index, &vcpu->arch.irq_summary);
-	return irq;
-}
-
-static inline void push_irq(struct kvm_vcpu *vcpu, u8 irq)
-{
-	set_bit(irq, vcpu->arch.irq_pending);
-	set_bit(irq / BITS_PER_LONG, &vcpu->arch.irq_summary);
-}
-
 static inline void clgi(void)
 {
 	asm volatile (__ex(SVM_CLGI));
@@ -214,17 +196,31 @@ static void svm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 	svm->vmcb->control.event_inj_err = error_code;
 }
 
-static bool svm_exception_injected(struct kvm_vcpu *vcpu)
+static int is_external_interrupt(u32 info)
+{
+	info &= SVM_EVTINJ_TYPE_MASK | SVM_EVTINJ_VALID;
+	return info == (SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR);
+}
+
+static u32 svm_get_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
+	u32 ret = 0;
 
-	return !(svm->vmcb->control.exit_int_info & SVM_EXITINTINFO_VALID);
+	if (svm->vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK)
+		ret |= X86_SHADOW_INT_STI | X86_SHADOW_INT_MOV_SS;
+	return ret & mask;
 }
 
-static int is_external_interrupt(u32 info)
+static void svm_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
 {
-	info &= SVM_EVTINJ_TYPE_MASK | SVM_EVTINJ_VALID;
-	return info == (SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR);
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	if (mask == 0)
+		svm->vmcb->control.int_state &= ~SVM_INTERRUPT_SHADOW_MASK;
+	else
+		svm->vmcb->control.int_state |= SVM_INTERRUPT_SHADOW_MASK;
+
 }
 
 static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
@@ -232,7 +228,9 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	if (!svm->next_rip) {
-		printk(KERN_DEBUG "%s: NOP\n", __func__);
+		if (emulate_instruction(vcpu, vcpu->run, 0, 0, EMULTYPE_SKIP) !=
+				EMULATE_DONE)
+			printk(KERN_DEBUG "%s: NOP\n", __func__);
 		return;
 	}
 	if (svm->next_rip - kvm_rip_read(vcpu) > MAX_INST_SIZE)
@@ -240,9 +238,7 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 		       __func__, kvm_rip_read(vcpu), svm->next_rip);
 
 	kvm_rip_write(vcpu, svm->next_rip);
-	svm->vmcb->control.int_state &= ~SVM_INTERRUPT_SHADOW_MASK;
-
-	vcpu->arch.interrupt_window_open = (svm->vcpu.arch.hflags & HF_GIF_MASK);
+	svm_set_interrupt_shadow(vcpu, 0);
 }
 
 static int has_svm(void)
@@ -830,6 +826,15 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 		if (!var->unusable)
 			var->type |= 0x1;
 		break;
+	case VCPU_SREG_SS:
+		/* On AMD CPUs sometimes the DB bit in the segment
+		 * descriptor is left as 1, although the whole segment has
+		 * been made unusable. Clear it here to pass an Intel VMX
+		 * entry check when cross vendor migrating.
+		 */
+		if (var->unusable)
+			var->db = 0;
+		break;
 	}
 }
 
@@ -960,15 +965,16 @@ static void svm_set_segment(struct kvm_vcpu *vcpu,
 
 }
 
-static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
+static void update_db_intercept(struct kvm_vcpu *vcpu)
 {
-	int old_debug = vcpu->guest_debug;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	vcpu->guest_debug = dbg->control;
-
 	svm->vmcb->control.intercept_exceptions &=
 		~((1 << DB_VECTOR) | (1 << BP_VECTOR));
+
+	if (vcpu->arch.singlestep)
+		svm->vmcb->control.intercept_exceptions |= (1 << DB_VECTOR);
+
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
 		if (vcpu->guest_debug &
 		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
@@ -979,6 +985,16 @@ static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 				1 << BP_VECTOR;
 	} else
 		vcpu->guest_debug = 0;
+}
+
+static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
+{
+	int old_debug = vcpu->guest_debug;
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	vcpu->guest_debug = dbg->control;
+
+	update_db_intercept(vcpu);
 
 	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
 		svm->vmcb->save.dr7 = dbg->arch.debugreg[7];
@@ -993,16 +1009,6 @@ static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 	return 0;
 }
 
-static int svm_get_irq(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-	u32 exit_int_info = svm->vmcb->control.exit_int_info;
-
-	if (is_external_interrupt(exit_int_info))
-		return exit_int_info & SVM_EVTINJ_VEC_MASK;
-	return -1;
-}
-
 static void load_host_msrs(struct kvm_vcpu *vcpu)
 {
 #ifdef CONFIG_X86_64
@@ -1107,17 +1113,8 @@ static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
 
 static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
-	u32 exit_int_info = svm->vmcb->control.exit_int_info;
-	struct kvm *kvm = svm->vcpu.kvm;
 	u64 fault_address;
 	u32 error_code;
-	bool event_injection = false;
-
-	if (!irqchip_in_kernel(kvm) &&
-	    is_external_interrupt(exit_int_info)) {
-		event_injection = true;
-		push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
-	}
 
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
@@ -1137,23 +1134,40 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	 */
 	if (npt_enabled)
 		svm_flush_tlb(&svm->vcpu);
-
-	if (!npt_enabled && event_injection)
-		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
+	else {
+		if (kvm_event_needs_reinjection(&svm->vcpu))
+			kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
+	}
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
 static int db_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	if (!(svm->vcpu.guest_debug &
-	      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
+	      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) &&
+		!svm->vcpu.arch.singlestep) {
 		kvm_queue_exception(&svm->vcpu, DB_VECTOR);
 		return 1;
 	}
-	kvm_run->exit_reason = KVM_EXIT_DEBUG;
-	kvm_run->debug.arch.pc = svm->vmcb->save.cs.base + svm->vmcb->save.rip;
-	kvm_run->debug.arch.exception = DB_VECTOR;
-	return 0;
+
+	if (svm->vcpu.arch.singlestep) {
+		svm->vcpu.arch.singlestep = false;
+		if (!(svm->vcpu.guest_debug & KVM_GUESTDBG_SINGLESTEP))
+			svm->vmcb->save.rflags &=
+				~(X86_EFLAGS_TF | X86_EFLAGS_RF);
+		update_db_intercept(&svm->vcpu);
+	}
+
+	if (svm->vcpu.guest_debug &
+	    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)){
+		kvm_run->exit_reason = KVM_EXIT_DEBUG;
+		kvm_run->debug.arch.pc =
+			svm->vmcb->save.cs.base + svm->vmcb->save.rip;
+		kvm_run->debug.arch.exception = DB_VECTOR;
+		return 0;
+	}
+
+	return 1;
 }
 
 static int bp_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
@@ -1842,17 +1856,51 @@ static int task_switch_interception(struct vcpu_svm *svm,
 				    struct kvm_run *kvm_run)
 {
 	u16 tss_selector;
+	int reason;
+	int int_type = svm->vmcb->control.exit_int_info &
+		SVM_EXITINTINFO_TYPE_MASK;
+	int int_vec = svm->vmcb->control.exit_int_info & SVM_EVTINJ_VEC_MASK;
+	uint32_t type =
+		svm->vmcb->control.exit_int_info & SVM_EXITINTINFO_TYPE_MASK;
+	uint32_t idt_v =
+		svm->vmcb->control.exit_int_info & SVM_EXITINTINFO_VALID;
 
 	tss_selector = (u16)svm->vmcb->control.exit_info_1;
+
 	if (svm->vmcb->control.exit_info_2 &
 	    (1ULL << SVM_EXITINFOSHIFT_TS_REASON_IRET))
-		return kvm_task_switch(&svm->vcpu, tss_selector,
-				       TASK_SWITCH_IRET);
-	if (svm->vmcb->control.exit_info_2 &
-	    (1ULL << SVM_EXITINFOSHIFT_TS_REASON_JMP))
-		return kvm_task_switch(&svm->vcpu, tss_selector,
-				       TASK_SWITCH_JMP);
-	return kvm_task_switch(&svm->vcpu, tss_selector, TASK_SWITCH_CALL);
+		reason = TASK_SWITCH_IRET;
+	else if (svm->vmcb->control.exit_info_2 &
+		 (1ULL << SVM_EXITINFOSHIFT_TS_REASON_JMP))
+		reason = TASK_SWITCH_JMP;
+	else if (idt_v)
+		reason = TASK_SWITCH_GATE;
+	else
+		reason = TASK_SWITCH_CALL;
+
+	if (reason == TASK_SWITCH_GATE) {
+		switch (type) {
+		case SVM_EXITINTINFO_TYPE_NMI:
+			svm->vcpu.arch.nmi_injected = false;
+			break;
+		case SVM_EXITINTINFO_TYPE_EXEPT:
+			kvm_clear_exception_queue(&svm->vcpu);
+			break;
+		case SVM_EXITINTINFO_TYPE_INTR:
+			kvm_clear_interrupt_queue(&svm->vcpu);
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (reason != TASK_SWITCH_GATE ||
+	    int_type == SVM_EXITINTINFO_TYPE_SOFT ||
+	    (int_type == SVM_EXITINTINFO_TYPE_EXEPT &&
+	     (int_vec == OF_VECTOR || int_vec == BP_VECTOR)))
+		skip_emulated_instruction(&svm->vcpu);
+
+	return kvm_task_switch(&svm->vcpu, tss_selector, reason);
 }
 
 static int cpuid_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
@@ -1862,6 +1910,14 @@ static int cpuid_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int iret_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	++svm->vcpu.stat.nmi_window_exits;
+	svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
+	svm->vcpu.arch.hflags |= HF_IRET_MASK;
+	return 1;
+}
+
 static int invlpg_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	if (emulate_instruction(&svm->vcpu, kvm_run, 0, 0, 0) != EMULATE_DONE)
@@ -1879,8 +1935,14 @@ static int emulate_on_interception(struct vcpu_svm *svm,
 
 static int cr8_write_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
+	u8 cr8_prev = kvm_get_cr8(&svm->vcpu);
+	/* instruction emulation calls kvm_set_cr8() */
 	emulate_instruction(&svm->vcpu, NULL, 0, 0, 0);
-	if (irqchip_in_kernel(svm->vcpu.kvm))
+	if (irqchip_in_kernel(svm->vcpu.kvm)) {
+		svm->vmcb->control.intercept_cr_write &= ~INTERCEPT_CR8_MASK;
+		return 1;
+	}
+	if (cr8_prev <= kvm_get_cr8(&svm->vcpu))
 		return 1;
 	kvm_run->exit_reason = KVM_EXIT_SET_TPR;
 	return 0;
@@ -2090,8 +2152,9 @@ static int interrupt_window_interception(struct vcpu_svm *svm,
 	 * If the user space waits to inject interrupts, exit as soon as
 	 * possible
 	 */
-	if (kvm_run->request_interrupt_window &&
-	    !svm->vcpu.arch.irq_summary) {
+	if (!irqchip_in_kernel(svm->vcpu.kvm) &&
+	    kvm_run->request_interrupt_window &&
+	    !kvm_cpu_has_interrupt(&svm->vcpu)) {
 		++svm->vcpu.stat.irq_window_exits;
 		kvm_run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
 		return 0;
@@ -2134,6 +2197,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_VINTR]			= interrupt_window_interception,
 	/* [SVM_EXIT_CR0_SEL_WRITE]		= emulate_on_interception, */
 	[SVM_EXIT_CPUID]			= cpuid_interception,
+	[SVM_EXIT_IRET]                         = iret_interception,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= invlpg_interception,
@@ -2194,7 +2258,6 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		}
 	}
 
-	kvm_reput_irq(svm);
 
 	if (svm->vmcb->control.exit_code == SVM_EXIT_ERR) {
 		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
@@ -2205,7 +2268,7 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	if (is_external_interrupt(svm->vmcb->control.exit_int_info) &&
 	    exit_code != SVM_EXIT_EXCP_BASE + PF_VECTOR &&
-	    exit_code != SVM_EXIT_NPF)
+	    exit_code != SVM_EXIT_NPF && exit_code != SVM_EXIT_TASK_SWITCH)
 		printk(KERN_ERR "%s: unexpected exit_ini_info 0x%x "
 		       "exit_code 0x%x\n",
 		       __func__, svm->vmcb->control.exit_int_info,
@@ -2242,6 +2305,15 @@ static void pre_svm_run(struct vcpu_svm *svm)
 		new_asid(svm, svm_data);
 }
 
+static void svm_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	svm->vmcb->control.event_inj = SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_NMI;
+	vcpu->arch.hflags |= HF_NMI_MASK;
+	svm->vmcb->control.intercept |= (1UL << INTERCEPT_IRET);
+	++vcpu->stat.nmi_injections;
+}
 
 static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
@@ -2257,134 +2329,71 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 		((/*control->int_vector >> 4*/ 0xf) << V_INTR_PRIO_SHIFT);
 }
 
-static void svm_set_irq(struct kvm_vcpu *vcpu, int irq)
+static void svm_queue_irq(struct kvm_vcpu *vcpu, unsigned nr)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	nested_svm_intr(svm);
-
-	svm_inject_irq(svm, irq);
+	svm->vmcb->control.event_inj = nr |
+		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
 }
 
-static void update_cr8_intercept(struct kvm_vcpu *vcpu)
+static void svm_set_irq(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
-	struct vmcb *vmcb = svm->vmcb;
-	int max_irr, tpr;
 
-	if (!irqchip_in_kernel(vcpu->kvm) || vcpu->arch.apic->vapic_addr)
-		return;
+	nested_svm_intr(svm);
 
-	vmcb->control.intercept_cr_write &= ~INTERCEPT_CR8_MASK;
+	svm_queue_irq(vcpu, vcpu->arch.interrupt.nr);
+}
 
-	max_irr = kvm_lapic_find_highest_irr(vcpu);
-	if (max_irr == -1)
-		return;
+static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
 
-	tpr = kvm_lapic_get_cr8(vcpu) << 4;
+	if (irr == -1)
+		return;
 
-	if (tpr >= (max_irr & 0xf0))
-		vmcb->control.intercept_cr_write |= INTERCEPT_CR8_MASK;
+	if (tpr >= irr)
+		svm->vmcb->control.intercept_cr_write |= INTERCEPT_CR8_MASK;
 }
 
-static void svm_intr_assist(struct kvm_vcpu *vcpu)
+static int svm_nmi_allowed(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct vmcb *vmcb = svm->vmcb;
-	int intr_vector = -1;
-
-	if ((vmcb->control.exit_int_info & SVM_EVTINJ_VALID) &&
-	    ((vmcb->control.exit_int_info & SVM_EVTINJ_TYPE_MASK) == 0)) {
-		intr_vector = vmcb->control.exit_int_info &
-			      SVM_EVTINJ_VEC_MASK;
-		vmcb->control.exit_int_info = 0;
-		svm_inject_irq(svm, intr_vector);
-		goto out;
-	}
-
-	if (vmcb->control.int_ctl & V_IRQ_MASK)
-		goto out;
-
-	if (!kvm_cpu_has_interrupt(vcpu))
-		goto out;
-
-	if (nested_svm_intr(svm))
-		goto out;
-
-	if (!(svm->vcpu.arch.hflags & HF_GIF_MASK))
-		goto out;
-
-	if (!(vmcb->save.rflags & X86_EFLAGS_IF) ||
-	    (vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) ||
-	    (vmcb->control.event_inj & SVM_EVTINJ_VALID)) {
-		/* unable to deliver irq, set pending irq */
-		svm_set_vintr(svm);
-		svm_inject_irq(svm, 0x0);
-		goto out;
-	}
-	/* Okay, we can deliver the interrupt: grab it and update PIC state. */
-	intr_vector = kvm_cpu_get_interrupt(vcpu);
-	svm_inject_irq(svm, intr_vector);
-out:
-	update_cr8_intercept(vcpu);
+	return !(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
+		!(svm->vcpu.arch.hflags & HF_NMI_MASK);
 }
 
-static void kvm_reput_irq(struct vcpu_svm *svm)
+static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
-	struct vmcb_control_area *control = &svm->vmcb->control;
-
-	if ((control->int_ctl & V_IRQ_MASK)
-	    && !irqchip_in_kernel(svm->vcpu.kvm)) {
-		control->int_ctl &= ~V_IRQ_MASK;
-		push_irq(&svm->vcpu, control->int_vector);
-	}
-
-	svm->vcpu.arch.interrupt_window_open =
-		!(control->int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		 (svm->vcpu.arch.hflags & HF_GIF_MASK);
+	struct vcpu_svm *svm = to_svm(vcpu);
+	struct vmcb *vmcb = svm->vmcb;
+	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
+		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
+		(svm->vcpu.arch.hflags & HF_GIF_MASK);
 }
 
-static void svm_do_inject_vector(struct vcpu_svm *svm)
+static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
-	struct kvm_vcpu *vcpu = &svm->vcpu;
-	int word_index = __ffs(vcpu->arch.irq_summary);
-	int bit_index = __ffs(vcpu->arch.irq_pending[word_index]);
-	int irq = word_index * BITS_PER_LONG + bit_index;
-
-	clear_bit(bit_index, &vcpu->arch.irq_pending[word_index]);
-	if (!vcpu->arch.irq_pending[word_index])
-		clear_bit(word_index, &vcpu->arch.irq_summary);
-	svm_inject_irq(svm, irq);
+	svm_set_vintr(to_svm(vcpu));
+	svm_inject_irq(to_svm(vcpu), 0x0);
 }
 
-static void do_interrupt_requests(struct kvm_vcpu *vcpu,
-				       struct kvm_run *kvm_run)
+static void enable_nmi_window(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
-	struct vmcb_control_area *control = &svm->vmcb->control;
-
-	if (nested_svm_intr(svm))
-		return;
 
-	svm->vcpu.arch.interrupt_window_open =
-		(!(control->int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		 (svm->vmcb->save.rflags & X86_EFLAGS_IF) &&
-		 (svm->vcpu.arch.hflags & HF_GIF_MASK));
+	if ((svm->vcpu.arch.hflags & (HF_NMI_MASK | HF_IRET_MASK))
+	    == HF_NMI_MASK)
+		return; /* IRET will cause a vm exit */
 
-	if (svm->vcpu.arch.interrupt_window_open && svm->vcpu.arch.irq_summary)
-		/*
-		 * If interrupts enabled, and not blocked by sti or mov ss. Good.
-		 */
-		svm_do_inject_vector(svm);
-
-	/*
-	 * Interrupts blocked.  Wait for unblock.
-	 */
-	if (!svm->vcpu.arch.interrupt_window_open &&
-	    (svm->vcpu.arch.irq_summary || kvm_run->request_interrupt_window))
-		svm_set_vintr(svm);
-	else
-		svm_clear_vintr(svm);
+	/* Something prevents NMI from been injected. Single step over
+	   possible problem (IRET or exception injection or interrupt
+	   shadow) */
+	vcpu->arch.singlestep = true;
+	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
+	update_db_intercept(vcpu);
 }
 
 static int svm_set_tss_addr(struct kvm *kvm, unsigned int addr)
@@ -2407,7 +2416,7 @@ static inline void sync_cr8_to_lapic(struct kvm_vcpu *vcpu)
 
 	if (!(svm->vmcb->control.intercept_cr_write & INTERCEPT_CR8_MASK)) {
 		int cr8 = svm->vmcb->control.int_ctl & V_TPR_MASK;
-		kvm_lapic_set_tpr(vcpu, cr8);
+		kvm_set_cr8(vcpu, cr8);
 	}
 }
 
@@ -2416,14 +2425,54 @@ static inline void sync_lapic_to_cr8(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u64 cr8;
 
-	if (!irqchip_in_kernel(vcpu->kvm))
-		return;
-
 	cr8 = kvm_get_cr8(vcpu);
 	svm->vmcb->control.int_ctl &= ~V_TPR_MASK;
 	svm->vmcb->control.int_ctl |= cr8 & V_TPR_MASK;
 }
 
+static void svm_complete_interrupts(struct vcpu_svm *svm)
+{
+	u8 vector;
+	int type;
+	u32 exitintinfo = svm->vmcb->control.exit_int_info;
+
+	if (svm->vcpu.arch.hflags & HF_IRET_MASK)
+		svm->vcpu.arch.hflags &= ~(HF_NMI_MASK | HF_IRET_MASK);
+
+	svm->vcpu.arch.nmi_injected = false;
+	kvm_clear_exception_queue(&svm->vcpu);
+	kvm_clear_interrupt_queue(&svm->vcpu);
+
+	if (!(exitintinfo & SVM_EXITINTINFO_VALID))
+		return;
+
+	vector = exitintinfo & SVM_EXITINTINFO_VEC_MASK;
+	type = exitintinfo & SVM_EXITINTINFO_TYPE_MASK;
+
+	switch (type) {
+	case SVM_EXITINTINFO_TYPE_NMI:
+		svm->vcpu.arch.nmi_injected = true;
+		break;
+	case SVM_EXITINTINFO_TYPE_EXEPT:
+		/* In case of software exception do not reinject an exception
+		   vector, but re-execute and instruction instead */
+		if (kvm_exception_is_soft(vector))
+			break;
+		if (exitintinfo & SVM_EXITINTINFO_VALID_ERR) {
+			u32 err = svm->vmcb->control.exit_int_info_err;
+			kvm_queue_exception_e(&svm->vcpu, vector, err);
+
+		} else
+			kvm_queue_exception(&svm->vcpu, vector);
+		break;
+	case SVM_EXITINTINFO_TYPE_INTR:
+		kvm_queue_interrupt(&svm->vcpu, vector, false);
+		break;
+	default:
+		break;
+	}
+}
+
 #ifdef CONFIG_X86_64
 #define R "r"
 #else
@@ -2552,6 +2601,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	sync_cr8_to_lapic(vcpu);
 
 	svm->next_rip = 0;
+
+	svm_complete_interrupts(svm);
 }
 
 #undef R
@@ -2617,7 +2668,7 @@ static int get_npt_level(void)
 #endif
 }
 
-static int svm_get_mt_mask_shift(void)
+static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 {
 	return 0;
 }
@@ -2667,17 +2718,21 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.run = svm_vcpu_run,
 	.handle_exit = handle_exit,
 	.skip_emulated_instruction = skip_emulated_instruction,
+	.set_interrupt_shadow = svm_set_interrupt_shadow,
+	.get_interrupt_shadow = svm_get_interrupt_shadow,
 	.patch_hypercall = svm_patch_hypercall,
-	.get_irq = svm_get_irq,
 	.set_irq = svm_set_irq,
+	.set_nmi = svm_inject_nmi,
 	.queue_exception = svm_queue_exception,
-	.exception_injected = svm_exception_injected,
-	.inject_pending_irq = svm_intr_assist,
-	.inject_pending_vectors = do_interrupt_requests,
+	.interrupt_allowed = svm_interrupt_allowed,
+	.nmi_allowed = svm_nmi_allowed,
+	.enable_nmi_window = enable_nmi_window,
+	.enable_irq_window = enable_irq_window,
+	.update_cr8_intercept = update_cr8_intercept,
 
 	.set_tss_addr = svm_set_tss_addr,
 	.get_tdp_level = get_npt_level,
-	.get_mt_mask_shift = svm_get_mt_mask_shift,
+	.get_mt_mask = svm_get_mt_mask,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
new file mode 100644
index 00000000000..86dbac072d0
--- /dev/null
+++ b/arch/x86/kvm/timer.c
@@ -0,0 +1,46 @@
+#include <linux/kvm_host.h>
+#include <linux/kvm.h>
+#include <linux/hrtimer.h>
+#include <asm/atomic.h>
+#include "kvm_timer.h"
+
+static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
+{
+	int restart_timer = 0;
+	wait_queue_head_t *q = &vcpu->wq;
+
+	/* FIXME: this code should not know anything about vcpus */
+	if (!atomic_inc_and_test(&ktimer->pending))
+		set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+
+	if (!ktimer->reinject)
+		atomic_set(&ktimer->pending, 1);
+
+	if (waitqueue_active(q))
+		wake_up_interruptible(q);
+
+	if (ktimer->t_ops->is_periodic(ktimer)) {
+		hrtimer_add_expires_ns(&ktimer->timer, ktimer->period);
+		restart_timer = 1;
+	}
+
+	return restart_timer;
+}
+
+enum hrtimer_restart kvm_timer_fn(struct hrtimer *data)
+{
+	int restart_timer;
+	struct kvm_vcpu *vcpu;
+	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
+
+	vcpu = ktimer->kvm->vcpus[ktimer->vcpu_id];
+	if (!vcpu)
+		return HRTIMER_NORESTART;
+
+	restart_timer = __kvm_timer_fn(vcpu, ktimer);
+	if (restart_timer)
+		return HRTIMER_RESTART;
+	else
+		return HRTIMER_NORESTART;
+}
+
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index bb481330716..32d6ae8fb60 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -32,26 +32,27 @@
 #include <asm/desc.h>
 #include <asm/vmx.h>
 #include <asm/virtext.h>
+#include <asm/mce.h>
 
 #define __ex(x) __kvm_handle_fault_on_reboot(x)
 
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
-static int bypass_guest_pf = 1;
-module_param(bypass_guest_pf, bool, 0);
+static int __read_mostly bypass_guest_pf = 1;
+module_param(bypass_guest_pf, bool, S_IRUGO);
 
-static int enable_vpid = 1;
-module_param(enable_vpid, bool, 0);
+static int __read_mostly enable_vpid = 1;
+module_param_named(vpid, enable_vpid, bool, 0444);
 
-static int flexpriority_enabled = 1;
-module_param(flexpriority_enabled, bool, 0);
+static int __read_mostly flexpriority_enabled = 1;
+module_param_named(flexpriority, flexpriority_enabled, bool, S_IRUGO);
 
-static int enable_ept = 1;
-module_param(enable_ept, bool, 0);
+static int __read_mostly enable_ept = 1;
+module_param_named(ept, enable_ept, bool, S_IRUGO);
 
-static int emulate_invalid_guest_state = 0;
-module_param(emulate_invalid_guest_state, bool, 0);
+static int __read_mostly emulate_invalid_guest_state = 0;
+module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
 struct vmcs {
 	u32 revision_id;
@@ -97,6 +98,7 @@ struct vcpu_vmx {
 	int soft_vnmi_blocked;
 	ktime_t entry_time;
 	s64 vnmi_blocked_time;
+	u32 exit_reason;
 };
 
 static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
@@ -111,9 +113,10 @@ static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
 static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
 
-static struct page *vmx_io_bitmap_a;
-static struct page *vmx_io_bitmap_b;
-static struct page *vmx_msr_bitmap;
+static unsigned long *vmx_io_bitmap_a;
+static unsigned long *vmx_io_bitmap_b;
+static unsigned long *vmx_msr_bitmap_legacy;
+static unsigned long *vmx_msr_bitmap_longmode;
 
 static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS);
 static DEFINE_SPINLOCK(vmx_vpid_lock);
@@ -213,70 +216,78 @@ static inline int is_external_interrupt(u32 intr_info)
 		== (INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
 }
 
+static inline int is_machine_check(u32 intr_info)
+{
+	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
+			     INTR_INFO_VALID_MASK)) ==
+		(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
+}
+
 static inline int cpu_has_vmx_msr_bitmap(void)
 {
-	return (vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS);
+	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS;
 }
 
 static inline int cpu_has_vmx_tpr_shadow(void)
 {
-	return (vmcs_config.cpu_based_exec_ctrl & CPU_BASED_TPR_SHADOW);
+	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_TPR_SHADOW;
 }
 
 static inline int vm_need_tpr_shadow(struct kvm *kvm)
 {
-	return ((cpu_has_vmx_tpr_shadow()) && (irqchip_in_kernel(kvm)));
+	return (cpu_has_vmx_tpr_shadow()) && (irqchip_in_kernel(kvm));
 }
 
 static inline int cpu_has_secondary_exec_ctrls(void)
 {
-	return (vmcs_config.cpu_based_exec_ctrl &
-		CPU_BASED_ACTIVATE_SECONDARY_CONTROLS);
+	return vmcs_config.cpu_based_exec_ctrl &
+		CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
 }
 
 static inline bool cpu_has_vmx_virtualize_apic_accesses(void)
 {
-	return flexpriority_enabled
-		&& (vmcs_config.cpu_based_2nd_exec_ctrl &
-		    SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+}
+
+static inline bool cpu_has_vmx_flexpriority(void)
+{
+	return cpu_has_vmx_tpr_shadow() &&
+		cpu_has_vmx_virtualize_apic_accesses();
 }
 
 static inline int cpu_has_vmx_invept_individual_addr(void)
 {
-	return (!!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT));
+	return !!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT);
 }
 
 static inline int cpu_has_vmx_invept_context(void)
 {
-	return (!!(vmx_capability.ept & VMX_EPT_EXTENT_CONTEXT_BIT));
+	return !!(vmx_capability.ept & VMX_EPT_EXTENT_CONTEXT_BIT);
 }
 
 static inline int cpu_has_vmx_invept_global(void)
 {
-	return (!!(vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT));
+	return !!(vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT);
 }
 
 static inline int cpu_has_vmx_ept(void)
 {
-	return (vmcs_config.cpu_based_2nd_exec_ctrl &
-		SECONDARY_EXEC_ENABLE_EPT);
-}
-
-static inline int vm_need_ept(void)
-{
-	return (cpu_has_vmx_ept() && enable_ept);
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_ENABLE_EPT;
 }
 
 static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
-	return ((cpu_has_vmx_virtualize_apic_accesses()) &&
-		(irqchip_in_kernel(kvm)));
+	return flexpriority_enabled &&
+		(cpu_has_vmx_virtualize_apic_accesses()) &&
+		(irqchip_in_kernel(kvm));
 }
 
 static inline int cpu_has_vmx_vpid(void)
 {
-	return (vmcs_config.cpu_based_2nd_exec_ctrl &
-		SECONDARY_EXEC_ENABLE_VPID);
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_ENABLE_VPID;
 }
 
 static inline int cpu_has_virtual_nmis(void)
@@ -284,6 +295,11 @@ static inline int cpu_has_virtual_nmis(void)
 	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
 }
 
+static inline bool report_flexpriority(void)
+{
+	return flexpriority_enabled;
+}
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
@@ -381,7 +397,7 @@ static inline void ept_sync_global(void)
 
 static inline void ept_sync_context(u64 eptp)
 {
-	if (vm_need_ept()) {
+	if (enable_ept) {
 		if (cpu_has_vmx_invept_context())
 			__invept(VMX_EPT_EXTENT_CONTEXT, eptp, 0);
 		else
@@ -391,7 +407,7 @@ static inline void ept_sync_context(u64 eptp)
 
 static inline void ept_sync_individual_addr(u64 eptp, gpa_t gpa)
 {
-	if (vm_need_ept()) {
+	if (enable_ept) {
 		if (cpu_has_vmx_invept_individual_addr())
 			__invept(VMX_EPT_EXTENT_INDIVIDUAL_ADDR,
 					eptp, gpa);
@@ -478,7 +494,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 {
 	u32 eb;
 
-	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR);
+	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR);
 	if (!vcpu->fpu_active)
 		eb |= 1u << NM_VECTOR;
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
@@ -488,9 +504,9 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			eb |= 1u << BP_VECTOR;
 	}
-	if (vcpu->arch.rmode.active)
+	if (vcpu->arch.rmode.vm86_active)
 		eb = ~0;
-	if (vm_need_ept())
+	if (enable_ept)
 		eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
 	vmcs_write32(EXCEPTION_BITMAP, eb);
 }
@@ -724,29 +740,50 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
-	if (vcpu->arch.rmode.active)
+	if (vcpu->arch.rmode.vm86_active)
 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 	vmcs_writel(GUEST_RFLAGS, rflags);
 }
 
+static u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
+{
+	u32 interruptibility = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	int ret = 0;
+
+	if (interruptibility & GUEST_INTR_STATE_STI)
+		ret |= X86_SHADOW_INT_STI;
+	if (interruptibility & GUEST_INTR_STATE_MOV_SS)
+		ret |= X86_SHADOW_INT_MOV_SS;
+
+	return ret & mask;
+}
+
+static void vmx_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
+{
+	u32 interruptibility_old = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	u32 interruptibility = interruptibility_old;
+
+	interruptibility &= ~(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS);
+
+	if (mask & X86_SHADOW_INT_MOV_SS)
+		interruptibility |= GUEST_INTR_STATE_MOV_SS;
+	if (mask & X86_SHADOW_INT_STI)
+		interruptibility |= GUEST_INTR_STATE_STI;
+
+	if ((interruptibility != interruptibility_old))
+		vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, interruptibility);
+}
+
 static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 {
 	unsigned long rip;
-	u32 interruptibility;
 
 	rip = kvm_rip_read(vcpu);
 	rip += vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
 	kvm_rip_write(vcpu, rip);
 
-	/*
-	 * We emulated an instruction, so temporary interrupt blocking
-	 * should be removed, if set.
-	 */
-	interruptibility = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
-	if (interruptibility & 3)
-		vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
-			     interruptibility & ~3);
-	vcpu->arch.interrupt_window_open = 1;
+	/* skipping an emulated instruction also counts */
+	vmx_set_interrupt_shadow(vcpu, 0);
 }
 
 static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
@@ -760,7 +797,7 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
 	}
 
-	if (vcpu->arch.rmode.active) {
+	if (vcpu->arch.rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = nr;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -773,8 +810,9 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 		return;
 	}
 
-	if (nr == BP_VECTOR || nr == OF_VECTOR) {
-		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
+	if (kvm_exception_is_soft(nr)) {
+		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
+			     vmx->vcpu.arch.event_exit_inst_len);
 		intr_info |= INTR_TYPE_SOFT_EXCEPTION;
 	} else
 		intr_info |= INTR_TYPE_HARD_EXCEPTION;
@@ -782,11 +820,6 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 }
 
-static bool vmx_exception_injected(struct kvm_vcpu *vcpu)
-{
-	return false;
-}
-
 /*
  * Swap MSR entry in host/guest MSR entry array.
  */
@@ -812,6 +845,7 @@ static void move_msr_up(struct vcpu_vmx *vmx, int from, int to)
 static void setup_msrs(struct vcpu_vmx *vmx)
 {
 	int save_nmsrs;
+	unsigned long *msr_bitmap;
 
 	vmx_load_host_state(vmx);
 	save_nmsrs = 0;
@@ -847,6 +881,15 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 		__find_msr_index(vmx, MSR_KERNEL_GS_BASE);
 #endif
 	vmx->msr_offset_efer = __find_msr_index(vmx, MSR_EFER);
+
+	if (cpu_has_vmx_msr_bitmap()) {
+		if (is_long_mode(&vmx->vcpu))
+			msr_bitmap = vmx_msr_bitmap_longmode;
+		else
+			msr_bitmap = vmx_msr_bitmap_legacy;
+
+		vmcs_write64(MSR_BITMAP, __pa(msr_bitmap));
+	}
 }
 
 /*
@@ -1034,13 +1077,6 @@ static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 	return 0;
 }
 
-static int vmx_get_irq(struct kvm_vcpu *vcpu)
-{
-	if (!vcpu->arch.interrupt.pending)
-		return -1;
-	return vcpu->arch.interrupt.nr;
-}
-
 static __init int cpu_has_kvm_support(void)
 {
 	return cpu_has_vmx();
@@ -1294,6 +1330,18 @@ static __init int hardware_setup(void)
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
+	if (!cpu_has_vmx_vpid())
+		enable_vpid = 0;
+
+	if (!cpu_has_vmx_ept())
+		enable_ept = 0;
+
+	if (!cpu_has_vmx_flexpriority())
+		flexpriority_enabled = 0;
+
+	if (!cpu_has_vmx_tpr_shadow())
+		kvm_x86_ops->update_cr8_intercept = NULL;
+
 	return alloc_kvm_area();
 }
 
@@ -1324,7 +1372,7 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	vmx->emulation_required = 1;
-	vcpu->arch.rmode.active = 0;
+	vcpu->arch.rmode.vm86_active = 0;
 
 	vmcs_writel(GUEST_TR_BASE, vcpu->arch.rmode.tr.base);
 	vmcs_write32(GUEST_TR_LIMIT, vcpu->arch.rmode.tr.limit);
@@ -1386,7 +1434,7 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	vmx->emulation_required = 1;
-	vcpu->arch.rmode.active = 1;
+	vcpu->arch.rmode.vm86_active = 1;
 
 	vcpu->arch.rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
 	vmcs_writel(GUEST_TR_BASE, rmode_tss_base(vcpu->kvm));
@@ -1485,7 +1533,7 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
 static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	vpid_sync_vcpu_all(to_vmx(vcpu));
-	if (vm_need_ept())
+	if (enable_ept)
 		ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
 }
 
@@ -1555,10 +1603,10 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 	vmx_fpu_deactivate(vcpu);
 
-	if (vcpu->arch.rmode.active && (cr0 & X86_CR0_PE))
+	if (vcpu->arch.rmode.vm86_active && (cr0 & X86_CR0_PE))
 		enter_pmode(vcpu);
 
-	if (!vcpu->arch.rmode.active && !(cr0 & X86_CR0_PE))
+	if (!vcpu->arch.rmode.vm86_active && !(cr0 & X86_CR0_PE))
 		enter_rmode(vcpu);
 
 #ifdef CONFIG_X86_64
@@ -1570,7 +1618,7 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 	}
 #endif
 
-	if (vm_need_ept())
+	if (enable_ept)
 		ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
 
 	vmcs_writel(CR0_READ_SHADOW, cr0);
@@ -1599,7 +1647,7 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	u64 eptp;
 
 	guest_cr3 = cr3;
-	if (vm_need_ept()) {
+	if (enable_ept) {
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
 		ept_sync_context(eptp);
@@ -1616,11 +1664,11 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-	unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.active ?
+	unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.vm86_active ?
 		    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
 
 	vcpu->arch.cr4 = cr4;
-	if (vm_need_ept())
+	if (enable_ept)
 		ept_update_paging_mode_cr4(&hw_cr4, vcpu);
 
 	vmcs_writel(CR4_READ_SHADOW, cr4);
@@ -1699,7 +1747,7 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
 	u32 ar;
 
-	if (vcpu->arch.rmode.active && seg == VCPU_SREG_TR) {
+	if (vcpu->arch.rmode.vm86_active && seg == VCPU_SREG_TR) {
 		vcpu->arch.rmode.tr.selector = var->selector;
 		vcpu->arch.rmode.tr.base = var->base;
 		vcpu->arch.rmode.tr.limit = var->limit;
@@ -1709,7 +1757,7 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 	vmcs_writel(sf->base, var->base);
 	vmcs_write32(sf->limit, var->limit);
 	vmcs_write16(sf->selector, var->selector);
-	if (vcpu->arch.rmode.active && var->s) {
+	if (vcpu->arch.rmode.vm86_active && var->s) {
 		/*
 		 * Hack real-mode segments into vm86 compatibility.
 		 */
@@ -1982,7 +2030,7 @@ static int init_rmode_identity_map(struct kvm *kvm)
 	pfn_t identity_map_pfn;
 	u32 tmp;
 
-	if (!vm_need_ept())
+	if (!enable_ept)
 		return 1;
 	if (unlikely(!kvm->arch.ept_identity_pagetable)) {
 		printk(KERN_ERR "EPT: identity-mapping pagetable "
@@ -2071,7 +2119,7 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
 	int vpid;
 
 	vmx->vpid = 0;
-	if (!enable_vpid || !cpu_has_vmx_vpid())
+	if (!enable_vpid)
 		return;
 	spin_lock(&vmx_vpid_lock);
 	vpid = find_first_zero_bit(vmx_vpid_bitmap, VMX_NR_VPIDS);
@@ -2082,9 +2130,9 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
 	spin_unlock(&vmx_vpid_lock);
 }
 
-static void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
+static void __vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, u32 msr)
 {
-	void *va;
+	int f = sizeof(unsigned long);
 
 	if (!cpu_has_vmx_msr_bitmap())
 		return;
@@ -2094,16 +2142,21 @@ static void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
 	 * have the write-low and read-high bitmap offsets the wrong way round.
 	 * We can control MSRs 0x00000000-0x00001fff and 0xc0000000-0xc0001fff.
 	 */
-	va = kmap(msr_bitmap);
 	if (msr <= 0x1fff) {
-		__clear_bit(msr, va + 0x000); /* read-low */
-		__clear_bit(msr, va + 0x800); /* write-low */
+		__clear_bit(msr, msr_bitmap + 0x000 / f); /* read-low */
+		__clear_bit(msr, msr_bitmap + 0x800 / f); /* write-low */
 	} else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) {
 		msr &= 0x1fff;
-		__clear_bit(msr, va + 0x400); /* read-high */
-		__clear_bit(msr, va + 0xc00); /* write-high */
+		__clear_bit(msr, msr_bitmap + 0x400 / f); /* read-high */
+		__clear_bit(msr, msr_bitmap + 0xc00 / f); /* write-high */
 	}
-	kunmap(msr_bitmap);
+}
+
+static void vmx_disable_intercept_for_msr(u32 msr, bool longmode_only)
+{
+	if (!longmode_only)
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy, msr);
+	__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode, msr);
 }
 
 /*
@@ -2121,11 +2174,11 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	u32 exec_control;
 
 	/* I/O */
-	vmcs_write64(IO_BITMAP_A, page_to_phys(vmx_io_bitmap_a));
-	vmcs_write64(IO_BITMAP_B, page_to_phys(vmx_io_bitmap_b));
+	vmcs_write64(IO_BITMAP_A, __pa(vmx_io_bitmap_a));
+	vmcs_write64(IO_BITMAP_B, __pa(vmx_io_bitmap_b));
 
 	if (cpu_has_vmx_msr_bitmap())
-		vmcs_write64(MSR_BITMAP, page_to_phys(vmx_msr_bitmap));
+		vmcs_write64(MSR_BITMAP, __pa(vmx_msr_bitmap_legacy));
 
 	vmcs_write64(VMCS_LINK_POINTER, -1ull); /* 22.3.1.5 */
 
@@ -2141,7 +2194,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 				CPU_BASED_CR8_LOAD_EXITING;
 #endif
 	}
-	if (!vm_need_ept())
+	if (!enable_ept)
 		exec_control |= CPU_BASED_CR3_STORE_EXITING |
 				CPU_BASED_CR3_LOAD_EXITING  |
 				CPU_BASED_INVLPG_EXITING;
@@ -2154,7 +2207,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 				~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
 		if (vmx->vpid == 0)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
-		if (!vm_need_ept())
+		if (!enable_ept)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
 	}
@@ -2273,7 +2326,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-	vmx->vcpu.arch.rmode.active = 0;
+	vmx->vcpu.arch.rmode.vm86_active = 0;
 
 	vmx->soft_vnmi_blocked = 0;
 
@@ -2402,14 +2455,16 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu)
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 }
 
-static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
+static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	uint32_t intr;
+	int irq = vcpu->arch.interrupt.nr;
 
 	KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
 
 	++vcpu->stat.irq_injections;
-	if (vcpu->arch.rmode.active) {
+	if (vcpu->arch.rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = irq;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2419,8 +2474,14 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
 		kvm_rip_write(vcpu, vmx->rmode.irq.rip - 1);
 		return;
 	}
-	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
-			irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
+	intr = irq | INTR_INFO_VALID_MASK;
+	if (vcpu->arch.interrupt.soft) {
+		intr |= INTR_TYPE_SOFT_INTR;
+		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
+			     vmx->vcpu.arch.event_exit_inst_len);
+	} else
+		intr |= INTR_TYPE_EXT_INTR;
+	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr);
 }
 
 static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
@@ -2441,7 +2502,7 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 	}
 
 	++vcpu->stat.nmi_injections;
-	if (vcpu->arch.rmode.active) {
+	if (vcpu->arch.rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = NMI_VECTOR;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2456,76 +2517,21 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
 }
 
-static void vmx_update_window_states(struct kvm_vcpu *vcpu)
+static int vmx_nmi_allowed(struct kvm_vcpu *vcpu)
 {
-	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
-
-	vcpu->arch.nmi_window_open =
-		!(guest_intr & (GUEST_INTR_STATE_STI |
-				GUEST_INTR_STATE_MOV_SS |
-				GUEST_INTR_STATE_NMI));
 	if (!cpu_has_virtual_nmis() && to_vmx(vcpu)->soft_vnmi_blocked)
-		vcpu->arch.nmi_window_open = 0;
-
-	vcpu->arch.interrupt_window_open =
-		((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
-		 !(guest_intr & (GUEST_INTR_STATE_STI |
-				 GUEST_INTR_STATE_MOV_SS)));
-}
-
-static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
-{
-	int word_index = __ffs(vcpu->arch.irq_summary);
-	int bit_index = __ffs(vcpu->arch.irq_pending[word_index]);
-	int irq = word_index * BITS_PER_LONG + bit_index;
+		return 0;
 
-	clear_bit(bit_index, &vcpu->arch.irq_pending[word_index]);
-	if (!vcpu->arch.irq_pending[word_index])
-		clear_bit(word_index, &vcpu->arch.irq_summary);
-	kvm_queue_interrupt(vcpu, irq);
+	return	!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+			(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS |
+				GUEST_INTR_STATE_NMI));
 }
 
-static void do_interrupt_requests(struct kvm_vcpu *vcpu,
-				       struct kvm_run *kvm_run)
+static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
-	vmx_update_window_states(vcpu);
-
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
-				GUEST_INTR_STATE_STI |
-				GUEST_INTR_STATE_MOV_SS);
-
-	if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
-		if (vcpu->arch.interrupt.pending) {
-			enable_nmi_window(vcpu);
-		} else if (vcpu->arch.nmi_window_open) {
-			vcpu->arch.nmi_pending = false;
-			vcpu->arch.nmi_injected = true;
-		} else {
-			enable_nmi_window(vcpu);
-			return;
-		}
-	}
-	if (vcpu->arch.nmi_injected) {
-		vmx_inject_nmi(vcpu);
-		if (vcpu->arch.nmi_pending)
-			enable_nmi_window(vcpu);
-		else if (vcpu->arch.irq_summary
-			 || kvm_run->request_interrupt_window)
-			enable_irq_window(vcpu);
-		return;
-	}
-
-	if (vcpu->arch.interrupt_window_open) {
-		if (vcpu->arch.irq_summary && !vcpu->arch.interrupt.pending)
-			kvm_do_inject_irq(vcpu);
-
-		if (vcpu->arch.interrupt.pending)
-			vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
-	}
-	if (!vcpu->arch.interrupt_window_open &&
-	    (vcpu->arch.irq_summary || kvm_run->request_interrupt_window))
-		enable_irq_window(vcpu);
+	return (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
+		!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+			(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS));
 }
 
 static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr)
@@ -2585,6 +2591,31 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+/*
+ * Trigger machine check on the host. We assume all the MSRs are already set up
+ * by the CPU and that we still run on the same CPU as the MCE occurred on.
+ * We pass a fake environment to the machine check handler because we want
+ * the guest to be always treated like user space, no matter what context
+ * it used internally.
+ */
+static void kvm_machine_check(void)
+{
+#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+	struct pt_regs regs = {
+		.cs = 3, /* Fake ring 3 no matter what the guest ran on */
+		.flags = X86_EFLAGS_IF,
+	};
+
+	do_machine_check(&regs, 0);
+#endif
+}
+
+static int handle_machine_check(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	/* already handled by vcpu_run */
+	return 1;
+}
+
 static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -2596,17 +2627,14 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	vect_info = vmx->idt_vectoring_info;
 	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
+	if (is_machine_check(intr_info))
+		return handle_machine_check(vcpu, kvm_run);
+
 	if ((vect_info & VECTORING_INFO_VALID_MASK) &&
 						!is_page_fault(intr_info))
 		printk(KERN_ERR "%s: unexpected, vectoring info 0x%x "
 		       "intr info 0x%x\n", __func__, vect_info, intr_info);
 
-	if (!irqchip_in_kernel(vcpu->kvm) && is_external_interrupt(vect_info)) {
-		int irq = vect_info & VECTORING_INFO_VECTOR_MASK;
-		set_bit(irq, vcpu->arch.irq_pending);
-		set_bit(irq / BITS_PER_LONG, &vcpu->arch.irq_summary);
-	}
-
 	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR)
 		return 1;  /* already handled by vmx_vcpu_run() */
 
@@ -2628,17 +2656,17 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
 	if (is_page_fault(intr_info)) {
 		/* EPT won't cause page fault directly */
-		if (vm_need_ept())
+		if (enable_ept)
 			BUG();
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
 		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
 			    (u32)((u64)cr2 >> 32), handler);
-		if (vcpu->arch.interrupt.pending || vcpu->arch.exception.pending)
+		if (kvm_event_needs_reinjection(vcpu))
 			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
-	if (vcpu->arch.rmode.active &&
+	if (vcpu->arch.rmode.vm86_active &&
 	    handle_rmode_exception(vcpu, intr_info & INTR_INFO_VECTOR_MASK,
 								error_code)) {
 		if (vcpu->arch.halt_request) {
@@ -2753,13 +2781,18 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			kvm_set_cr4(vcpu, kvm_register_read(vcpu, reg));
 			skip_emulated_instruction(vcpu);
 			return 1;
-		case 8:
-			kvm_set_cr8(vcpu, kvm_register_read(vcpu, reg));
-			skip_emulated_instruction(vcpu);
-			if (irqchip_in_kernel(vcpu->kvm))
-				return 1;
-			kvm_run->exit_reason = KVM_EXIT_SET_TPR;
-			return 0;
+		case 8: {
+				u8 cr8_prev = kvm_get_cr8(vcpu);
+				u8 cr8 = kvm_register_read(vcpu, reg);
+				kvm_set_cr8(vcpu, cr8);
+				skip_emulated_instruction(vcpu);
+				if (irqchip_in_kernel(vcpu->kvm))
+					return 1;
+				if (cr8_prev <= cr8)
+					return 1;
+				kvm_run->exit_reason = KVM_EXIT_SET_TPR;
+				return 0;
+			}
 		};
 		break;
 	case 2: /* clts */
@@ -2957,8 +2990,9 @@ static int handle_interrupt_window(struct kvm_vcpu *vcpu,
 	 * If the user space waits to inject interrupts, exit as soon as
 	 * possible
 	 */
-	if (kvm_run->request_interrupt_window &&
-	    !vcpu->arch.irq_summary) {
+	if (!irqchip_in_kernel(vcpu->kvm) &&
+	    kvm_run->request_interrupt_window &&
+	    !kvm_cpu_has_interrupt(vcpu)) {
 		kvm_run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
 		return 0;
 	}
@@ -2980,7 +3014,7 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	u64 exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 
 	kvm_mmu_invlpg(vcpu, exit_qualification);
 	skip_emulated_instruction(vcpu);
@@ -2996,11 +3030,11 @@ static int handle_wbinvd(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	u64 exit_qualification;
+	unsigned long exit_qualification;
 	enum emulation_result er;
 	unsigned long offset;
 
-	exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	offset = exit_qualification & 0xffful;
 
 	er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
@@ -3019,22 +3053,41 @@ static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long exit_qualification;
 	u16 tss_selector;
-	int reason;
+	int reason, type, idt_v;
+
+	idt_v = (vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK);
+	type = (vmx->idt_vectoring_info & VECTORING_INFO_TYPE_MASK);
 
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 
 	reason = (u32)exit_qualification >> 30;
-	if (reason == TASK_SWITCH_GATE && vmx->vcpu.arch.nmi_injected &&
-	    (vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK) &&
-	    (vmx->idt_vectoring_info & VECTORING_INFO_TYPE_MASK)
-	    == INTR_TYPE_NMI_INTR) {
-		vcpu->arch.nmi_injected = false;
-		if (cpu_has_virtual_nmis())
-			vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
-				      GUEST_INTR_STATE_NMI);
+	if (reason == TASK_SWITCH_GATE && idt_v) {
+		switch (type) {
+		case INTR_TYPE_NMI_INTR:
+			vcpu->arch.nmi_injected = false;
+			if (cpu_has_virtual_nmis())
+				vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
+					      GUEST_INTR_STATE_NMI);
+			break;
+		case INTR_TYPE_EXT_INTR:
+		case INTR_TYPE_SOFT_INTR:
+			kvm_clear_interrupt_queue(vcpu);
+			break;
+		case INTR_TYPE_HARD_EXCEPTION:
+		case INTR_TYPE_SOFT_EXCEPTION:
+			kvm_clear_exception_queue(vcpu);
+			break;
+		default:
+			break;
+		}
 	}
 	tss_selector = exit_qualification;
 
+	if (!idt_v || (type != INTR_TYPE_HARD_EXCEPTION &&
+		       type != INTR_TYPE_EXT_INTR &&
+		       type != INTR_TYPE_NMI_INTR))
+		skip_emulated_instruction(vcpu);
+
 	if (!kvm_task_switch(vcpu, tss_selector, reason))
 		return 0;
 
@@ -3051,11 +3104,11 @@ static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	u64 exit_qualification;
+	unsigned long exit_qualification;
 	gpa_t gpa;
 	int gla_validity;
 
-	exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 
 	if (exit_qualification & (1 << 6)) {
 		printk(KERN_ERR "EPT: GPA exceeds GAW!\n");
@@ -3067,7 +3120,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		printk(KERN_ERR "EPT: Handling EPT violation failed!\n");
 		printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
 			(long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
-			(long unsigned int)vmcs_read64(GUEST_LINEAR_ADDRESS));
+			vmcs_readl(GUEST_LINEAR_ADDRESS));
 		printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
 			(long unsigned int)exit_qualification);
 		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
@@ -3150,6 +3203,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
 	[EXIT_REASON_TASK_SWITCH]             = handle_task_switch,
 	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
+	[EXIT_REASON_MCE_DURING_VMENTRY]      = handle_machine_check,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -3159,10 +3213,10 @@ static const int kvm_vmx_max_exit_handlers =
  * The guest has exited.  See if we can fix it or if we need userspace
  * assistance.
  */
-static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
-	u32 exit_reason = vmcs_read32(VM_EXIT_REASON);
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	u32 exit_reason = vmx->exit_reason;
 	u32 vectoring_info = vmx->idt_vectoring_info;
 
 	KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)kvm_rip_read(vcpu),
@@ -3178,7 +3232,7 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
-	if (vm_need_ept() && is_paging(vcpu)) {
+	if (enable_ept && is_paging(vcpu)) {
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
 		ept_load_pdptrs(vcpu);
 	}
@@ -3199,9 +3253,8 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		       __func__, vectoring_info, exit_reason);
 
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked)) {
-		if (vcpu->arch.interrupt_window_open) {
+		if (vmx_interrupt_allowed(vcpu)) {
 			vmx->soft_vnmi_blocked = 0;
-			vcpu->arch.nmi_window_open = 1;
 		} else if (vmx->vnmi_blocked_time > 1000000000LL &&
 			   vcpu->arch.nmi_pending) {
 			/*
@@ -3214,7 +3267,6 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 			       "state on VCPU %d after 1 s timeout\n",
 			       __func__, vcpu->vcpu_id);
 			vmx->soft_vnmi_blocked = 0;
-			vmx->vcpu.arch.nmi_window_open = 1;
 		}
 	}
 
@@ -3228,122 +3280,107 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-static void update_tpr_threshold(struct kvm_vcpu *vcpu)
+static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
 {
-	int max_irr, tpr;
-
-	if (!vm_need_tpr_shadow(vcpu->kvm))
-		return;
-
-	if (!kvm_lapic_enabled(vcpu) ||
-	    ((max_irr = kvm_lapic_find_highest_irr(vcpu)) == -1)) {
+	if (irr == -1 || tpr < irr) {
 		vmcs_write32(TPR_THRESHOLD, 0);
 		return;
 	}
 
-	tpr = (kvm_lapic_get_cr8(vcpu) & 0x0f) << 4;
-	vmcs_write32(TPR_THRESHOLD, (max_irr > tpr) ? tpr >> 4 : max_irr >> 4);
+	vmcs_write32(TPR_THRESHOLD, irr);
 }
 
 static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 {
 	u32 exit_intr_info;
-	u32 idt_vectoring_info;
+	u32 idt_vectoring_info = vmx->idt_vectoring_info;
 	bool unblock_nmi;
 	u8 vector;
 	int type;
 	bool idtv_info_valid;
-	u32 error;
 
 	exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+
+	vmx->exit_reason = vmcs_read32(VM_EXIT_REASON);
+
+	/* Handle machine checks before interrupts are enabled */
+	if ((vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY)
+	    || (vmx->exit_reason == EXIT_REASON_EXCEPTION_NMI
+		&& is_machine_check(exit_intr_info)))
+		kvm_machine_check();
+
+	/* We need to handle NMIs before interrupts are enabled */
+	if ((exit_intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
+	    (exit_intr_info & INTR_INFO_VALID_MASK)) {
+		KVMTRACE_0D(NMI, &vmx->vcpu, handler);
+		asm("int $2");
+	}
+
+	idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
+
 	if (cpu_has_virtual_nmis()) {
 		unblock_nmi = (exit_intr_info & INTR_INFO_UNBLOCK_NMI) != 0;
 		vector = exit_intr_info & INTR_INFO_VECTOR_MASK;
 		/*
-		 * SDM 3: 25.7.1.2
+		 * SDM 3: 27.7.1.2 (September 2008)
 		 * Re-set bit "block by NMI" before VM entry if vmexit caused by
 		 * a guest IRET fault.
+		 * SDM 3: 23.2.2 (September 2008)
+		 * Bit 12 is undefined in any of the following cases:
+		 *  If the VM exit sets the valid bit in the IDT-vectoring
+		 *   information field.
+		 *  If the VM exit is due to a double fault.
 		 */
-		if (unblock_nmi && vector != DF_VECTOR)
+		if ((exit_intr_info & INTR_INFO_VALID_MASK) && unblock_nmi &&
+		    vector != DF_VECTOR && !idtv_info_valid)
 			vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
 				      GUEST_INTR_STATE_NMI);
 	} else if (unlikely(vmx->soft_vnmi_blocked))
 		vmx->vnmi_blocked_time +=
 			ktime_to_ns(ktime_sub(ktime_get(), vmx->entry_time));
 
-	idt_vectoring_info = vmx->idt_vectoring_info;
-	idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
+	vmx->vcpu.arch.nmi_injected = false;
+	kvm_clear_exception_queue(&vmx->vcpu);
+	kvm_clear_interrupt_queue(&vmx->vcpu);
+
+	if (!idtv_info_valid)
+		return;
+
 	vector = idt_vectoring_info & VECTORING_INFO_VECTOR_MASK;
 	type = idt_vectoring_info & VECTORING_INFO_TYPE_MASK;
-	if (vmx->vcpu.arch.nmi_injected) {
+
+	switch (type) {
+	case INTR_TYPE_NMI_INTR:
+		vmx->vcpu.arch.nmi_injected = true;
 		/*
-		 * SDM 3: 25.7.1.2
-		 * Clear bit "block by NMI" before VM entry if a NMI delivery
-		 * faulted.
+		 * SDM 3: 27.7.1.2 (September 2008)
+		 * Clear bit "block by NMI" before VM entry if a NMI
+		 * delivery faulted.
 		 */
-		if (idtv_info_valid && type == INTR_TYPE_NMI_INTR)
-			vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
-					GUEST_INTR_STATE_NMI);
-		else
-			vmx->vcpu.arch.nmi_injected = false;
-	}
-	kvm_clear_exception_queue(&vmx->vcpu);
-	if (idtv_info_valid && (type == INTR_TYPE_HARD_EXCEPTION ||
-				type == INTR_TYPE_SOFT_EXCEPTION)) {
+		vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
+				GUEST_INTR_STATE_NMI);
+		break;
+	case INTR_TYPE_SOFT_EXCEPTION:
+		vmx->vcpu.arch.event_exit_inst_len =
+			vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+		/* fall through */
+	case INTR_TYPE_HARD_EXCEPTION:
 		if (idt_vectoring_info & VECTORING_INFO_DELIVER_CODE_MASK) {
-			error = vmcs_read32(IDT_VECTORING_ERROR_CODE);
-			kvm_queue_exception_e(&vmx->vcpu, vector, error);
+			u32 err = vmcs_read32(IDT_VECTORING_ERROR_CODE);
+			kvm_queue_exception_e(&vmx->vcpu, vector, err);
 		} else
 			kvm_queue_exception(&vmx->vcpu, vector);
-		vmx->idt_vectoring_info = 0;
-	}
-	kvm_clear_interrupt_queue(&vmx->vcpu);
-	if (idtv_info_valid && type == INTR_TYPE_EXT_INTR) {
-		kvm_queue_interrupt(&vmx->vcpu, vector);
-		vmx->idt_vectoring_info = 0;
-	}
-}
-
-static void vmx_intr_assist(struct kvm_vcpu *vcpu)
-{
-	update_tpr_threshold(vcpu);
-
-	vmx_update_window_states(vcpu);
-
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
-				GUEST_INTR_STATE_STI |
-				GUEST_INTR_STATE_MOV_SS);
-
-	if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
-		if (vcpu->arch.interrupt.pending) {
-			enable_nmi_window(vcpu);
-		} else if (vcpu->arch.nmi_window_open) {
-			vcpu->arch.nmi_pending = false;
-			vcpu->arch.nmi_injected = true;
-		} else {
-			enable_nmi_window(vcpu);
-			return;
-		}
-	}
-	if (vcpu->arch.nmi_injected) {
-		vmx_inject_nmi(vcpu);
-		if (vcpu->arch.nmi_pending)
-			enable_nmi_window(vcpu);
-		else if (kvm_cpu_has_interrupt(vcpu))
-			enable_irq_window(vcpu);
-		return;
-	}
-	if (!vcpu->arch.interrupt.pending && kvm_cpu_has_interrupt(vcpu)) {
-		if (vcpu->arch.interrupt_window_open)
-			kvm_queue_interrupt(vcpu, kvm_cpu_get_interrupt(vcpu));
-		else
-			enable_irq_window(vcpu);
-	}
-	if (vcpu->arch.interrupt.pending) {
-		vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
-		if (kvm_cpu_has_interrupt(vcpu))
-			enable_irq_window(vcpu);
+		break;
+	case INTR_TYPE_SOFT_INTR:
+		vmx->vcpu.arch.event_exit_inst_len =
+			vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+		/* fall through */
+	case INTR_TYPE_EXT_INTR:
+		kvm_queue_interrupt(&vmx->vcpu, vector,
+			type == INTR_TYPE_SOFT_INTR);
+		break;
+	default:
+		break;
 	}
 }
 
@@ -3381,7 +3418,6 @@ static void fixup_rmode_irq(struct vcpu_vmx *vmx)
 static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 intr_info;
 
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
@@ -3505,20 +3541,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	if (vmx->rmode.irq.pending)
 		fixup_rmode_irq(vmx);
 
-	vmx_update_window_states(vcpu);
-
 	asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
 	vmx->launched = 1;
 
-	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
-
-	/* We need to handle NMIs before interrupts are enabled */
-	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
-	    (intr_info & INTR_INFO_VALID_MASK)) {
-		KVMTRACE_0D(NMI, vcpu, handler);
-		asm("int $2");
-	}
-
 	vmx_complete_interrupts(vmx);
 }
 
@@ -3593,7 +3618,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		if (alloc_apic_access_page(kvm) != 0)
 			goto free_vmcs;
 
-	if (vm_need_ept())
+	if (enable_ept)
 		if (alloc_identity_pagetable(kvm) != 0)
 			goto free_vmcs;
 
@@ -3631,9 +3656,32 @@ static int get_ept_level(void)
 	return VMX_EPT_DEFAULT_GAW + 1;
 }
 
-static int vmx_get_mt_mask_shift(void)
+static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 {
-	return VMX_EPT_MT_EPTE_SHIFT;
+	u64 ret;
+
+	/* For VT-d and EPT combination
+	 * 1. MMIO: always map as UC
+	 * 2. EPT with VT-d:
+	 *   a. VT-d without snooping control feature: can't guarantee the
+	 *	result, try to trust guest.
+	 *   b. VT-d with snooping control feature: snooping control feature of
+	 *	VT-d engine can guarantee the cache correctness. Just set it
+	 *	to WB to keep consistent with host. So the same as item 3.
+	 * 3. EPT without VT-d: always map as WB and set IGMT=1 to keep
+	 *    consistent with host MTRR
+	 */
+	if (is_mmio)
+		ret = MTRR_TYPE_UNCACHABLE << VMX_EPT_MT_EPTE_SHIFT;
+	else if (vcpu->kvm->arch.iommu_domain &&
+		!(vcpu->kvm->arch.iommu_flags & KVM_IOMMU_CACHE_COHERENCY))
+		ret = kvm_get_guest_memory_type(vcpu, gfn) <<
+		      VMX_EPT_MT_EPTE_SHIFT;
+	else
+		ret = (MTRR_TYPE_WRBACK << VMX_EPT_MT_EPTE_SHIFT)
+			| VMX_EPT_IGMT_BIT;
+
+	return ret;
 }
 
 static struct kvm_x86_ops vmx_x86_ops = {
@@ -3644,7 +3692,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.check_processor_compatibility = vmx_check_processor_compat,
 	.hardware_enable = hardware_enable,
 	.hardware_disable = hardware_disable,
-	.cpu_has_accelerated_tpr = cpu_has_vmx_virtualize_apic_accesses,
+	.cpu_has_accelerated_tpr = report_flexpriority,
 
 	.vcpu_create = vmx_create_vcpu,
 	.vcpu_free = vmx_free_vcpu,
@@ -3678,78 +3726,82 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.tlb_flush = vmx_flush_tlb,
 
 	.run = vmx_vcpu_run,
-	.handle_exit = kvm_handle_exit,
+	.handle_exit = vmx_handle_exit,
 	.skip_emulated_instruction = skip_emulated_instruction,
+	.set_interrupt_shadow = vmx_set_interrupt_shadow,
+	.get_interrupt_shadow = vmx_get_interrupt_shadow,
 	.patch_hypercall = vmx_patch_hypercall,
-	.get_irq = vmx_get_irq,
 	.set_irq = vmx_inject_irq,
+	.set_nmi = vmx_inject_nmi,
 	.queue_exception = vmx_queue_exception,
-	.exception_injected = vmx_exception_injected,
-	.inject_pending_irq = vmx_intr_assist,
-	.inject_pending_vectors = do_interrupt_requests,
+	.interrupt_allowed = vmx_interrupt_allowed,
+	.nmi_allowed = vmx_nmi_allowed,
+	.enable_nmi_window = enable_nmi_window,
+	.enable_irq_window = enable_irq_window,
+	.update_cr8_intercept = update_cr8_intercept,
 
 	.set_tss_addr = vmx_set_tss_addr,
 	.get_tdp_level = get_ept_level,
-	.get_mt_mask_shift = vmx_get_mt_mask_shift,
+	.get_mt_mask = vmx_get_mt_mask,
 };
 
 static int __init vmx_init(void)
 {
-	void *va;
 	int r;
 
-	vmx_io_bitmap_a = alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
+	vmx_io_bitmap_a = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_io_bitmap_a)
 		return -ENOMEM;
 
-	vmx_io_bitmap_b = alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
+	vmx_io_bitmap_b = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_io_bitmap_b) {
 		r = -ENOMEM;
 		goto out;
 	}
 
-	vmx_msr_bitmap = alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
-	if (!vmx_msr_bitmap) {
+	vmx_msr_bitmap_legacy = (unsigned long *)__get_free_page(GFP_KERNEL);
+	if (!vmx_msr_bitmap_legacy) {
 		r = -ENOMEM;
 		goto out1;
 	}
 
+	vmx_msr_bitmap_longmode = (unsigned long *)__get_free_page(GFP_KERNEL);
+	if (!vmx_msr_bitmap_longmode) {
+		r = -ENOMEM;
+		goto out2;
+	}
+
 	/*
 	 * Allow direct access to the PC debug port (it is often used for I/O
 	 * delays, but the vmexits simply slow things down).
 	 */
-	va = kmap(vmx_io_bitmap_a);
-	memset(va, 0xff, PAGE_SIZE);
-	clear_bit(0x80, va);
-	kunmap(vmx_io_bitmap_a);
+	memset(vmx_io_bitmap_a, 0xff, PAGE_SIZE);
+	clear_bit(0x80, vmx_io_bitmap_a);
 
-	va = kmap(vmx_io_bitmap_b);
-	memset(va, 0xff, PAGE_SIZE);
-	kunmap(vmx_io_bitmap_b);
+	memset(vmx_io_bitmap_b, 0xff, PAGE_SIZE);
 
-	va = kmap(vmx_msr_bitmap);
-	memset(va, 0xff, PAGE_SIZE);
-	kunmap(vmx_msr_bitmap);
+	memset(vmx_msr_bitmap_legacy, 0xff, PAGE_SIZE);
+	memset(vmx_msr_bitmap_longmode, 0xff, PAGE_SIZE);
 
 	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
 
 	r = kvm_init(&vmx_x86_ops, sizeof(struct vcpu_vmx), THIS_MODULE);
 	if (r)
-		goto out2;
+		goto out3;
 
-	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_FS_BASE);
-	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_GS_BASE);
-	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_CS);
-	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
-	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
+	vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
+	vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
+	vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
+	vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_CS, false);
+	vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_ESP, false);
+	vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_EIP, false);
 
-	if (vm_need_ept()) {
+	if (enable_ept) {
 		bypass_guest_pf = 0;
 		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
 			VMX_EPT_WRITABLE_MASK);
 		kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
-				VMX_EPT_EXECUTABLE_MASK,
-				VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+				VMX_EPT_EXECUTABLE_MASK);
 		kvm_enable_tdp();
 	} else
 		kvm_disable_tdp();
@@ -3761,20 +3813,23 @@ static int __init vmx_init(void)
 
 	return 0;
 
+out3:
+	free_page((unsigned long)vmx_msr_bitmap_longmode);
 out2:
-	__free_page(vmx_msr_bitmap);
+	free_page((unsigned long)vmx_msr_bitmap_legacy);
 out1:
-	__free_page(vmx_io_bitmap_b);
+	free_page((unsigned long)vmx_io_bitmap_b);
 out:
-	__free_page(vmx_io_bitmap_a);
+	free_page((unsigned long)vmx_io_bitmap_a);
 	return r;
 }
 
 static void __exit vmx_exit(void)
 {
-	__free_page(vmx_msr_bitmap);
-	__free_page(vmx_io_bitmap_b);
-	__free_page(vmx_io_bitmap_a);
+	free_page((unsigned long)vmx_msr_bitmap_legacy);
+	free_page((unsigned long)vmx_msr_bitmap_longmode);
+	free_page((unsigned long)vmx_io_bitmap_b);
+	free_page((unsigned long)vmx_io_bitmap_a);
 
 	kvm_exit();
 }
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 49079a46687..249540f9851 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -91,7 +91,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
 	{ "hypercalls", VCPU_STAT(hypercalls) },
 	{ "request_irq", VCPU_STAT(request_irq_exits) },
-	{ "request_nmi", VCPU_STAT(request_nmi_exits) },
 	{ "irq_exits", VCPU_STAT(irq_exits) },
 	{ "host_state_reload", VCPU_STAT(host_state_reload) },
 	{ "efer_reload", VCPU_STAT(efer_reload) },
@@ -108,7 +107,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "mmu_recycled", VM_STAT(mmu_recycled) },
 	{ "mmu_cache_miss", VM_STAT(mmu_cache_miss) },
 	{ "mmu_unsync", VM_STAT(mmu_unsync) },
-	{ "mmu_unsync_global", VM_STAT(mmu_unsync_global) },
 	{ "remote_tlb_flush", VM_STAT(remote_tlb_flush) },
 	{ "largepages", VM_STAT(lpages) },
 	{ NULL }
@@ -234,7 +232,8 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 		goto out;
 	}
 	for (i = 0; i < ARRAY_SIZE(pdpte); ++i) {
-		if ((pdpte[i] & 1) && (pdpte[i] & 0xfffffff0000001e6ull)) {
+		if (is_present_pte(pdpte[i]) &&
+		    (pdpte[i] & vcpu->arch.mmu.rsvd_bits_mask[0][2])) {
 			ret = 0;
 			goto out;
 		}
@@ -321,7 +320,6 @@ void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 	kvm_x86_ops->set_cr0(vcpu, cr0);
 	vcpu->arch.cr0 = cr0;
 
-	kvm_mmu_sync_global(vcpu);
 	kvm_mmu_reset_context(vcpu);
 	return;
 }
@@ -338,6 +336,9 @@ EXPORT_SYMBOL_GPL(kvm_lmsw);
 
 void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
+	unsigned long old_cr4 = vcpu->arch.cr4;
+	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+
 	if (cr4 & CR4_RESERVED_BITS) {
 		printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
 		kvm_inject_gp(vcpu, 0);
@@ -351,7 +352,8 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 			kvm_inject_gp(vcpu, 0);
 			return;
 		}
-	} else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE)
+	} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
+		   && ((cr4 ^ old_cr4) & pdptr_bits)
 		   && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
 		printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
 		kvm_inject_gp(vcpu, 0);
@@ -366,7 +368,6 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	kvm_x86_ops->set_cr4(vcpu, cr4);
 	vcpu->arch.cr4 = cr4;
 	vcpu->arch.mmu.base_role.cr4_pge = (cr4 & X86_CR4_PGE) && !tdp_enabled;
-	kvm_mmu_sync_global(vcpu);
 	kvm_mmu_reset_context(vcpu);
 }
 EXPORT_SYMBOL_GPL(kvm_set_cr4);
@@ -519,6 +520,9 @@ static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
 	efer |= vcpu->arch.shadow_efer & EFER_LMA;
 
 	vcpu->arch.shadow_efer = efer;
+
+	vcpu->arch.mmu.base_role.nxe = (efer & EFER_NX) && !tdp_enabled;
+	kvm_mmu_reset_context(vcpu);
 }
 
 void kvm_enable_efer_bits(u64 mask)
@@ -626,14 +630,17 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	unsigned long flags;
 	struct kvm_vcpu_arch *vcpu = &v->arch;
 	void *shared_kaddr;
+	unsigned long this_tsc_khz;
 
 	if ((!vcpu->time_page))
 		return;
 
-	if (unlikely(vcpu->hv_clock_tsc_khz != __get_cpu_var(cpu_tsc_khz))) {
-		kvm_set_time_scale(__get_cpu_var(cpu_tsc_khz), &vcpu->hv_clock);
-		vcpu->hv_clock_tsc_khz = __get_cpu_var(cpu_tsc_khz);
+	this_tsc_khz = get_cpu_var(cpu_tsc_khz);
+	if (unlikely(vcpu->hv_clock_tsc_khz != this_tsc_khz)) {
+		kvm_set_time_scale(this_tsc_khz, &vcpu->hv_clock);
+		vcpu->hv_clock_tsc_khz = this_tsc_khz;
 	}
+	put_cpu_var(cpu_tsc_khz);
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
@@ -889,6 +896,8 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_LASTINTFROMIP:
 	case MSR_IA32_LASTINTTOIP:
 	case MSR_VM_HSAVE_PA:
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
@@ -1020,6 +1029,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_SYNC_MMU:
 	case KVM_CAP_REINJECT_CONTROL:
 	case KVM_CAP_IRQ_INJECT_STATUS:
+	case KVM_CAP_ASSIGN_DEV_IRQ:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1237,41 +1247,53 @@ static void do_cpuid_1_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	entry->flags = 0;
 }
 
+#define F(x) bit(X86_FEATURE_##x)
+
 static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			 u32 index, int *nent, int maxnent)
 {
-	const u32 kvm_supported_word0_x86_features = bit(X86_FEATURE_FPU) |
-		bit(X86_FEATURE_VME) | bit(X86_FEATURE_DE) |
-		bit(X86_FEATURE_PSE) | bit(X86_FEATURE_TSC) |
-		bit(X86_FEATURE_MSR) | bit(X86_FEATURE_PAE) |
-		bit(X86_FEATURE_CX8) | bit(X86_FEATURE_APIC) |
-		bit(X86_FEATURE_SEP) | bit(X86_FEATURE_PGE) |
-		bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
-		bit(X86_FEATURE_CLFLSH) | bit(X86_FEATURE_MMX) |
-		bit(X86_FEATURE_FXSR) | bit(X86_FEATURE_XMM) |
-		bit(X86_FEATURE_XMM2) | bit(X86_FEATURE_SELFSNOOP);
-	const u32 kvm_supported_word1_x86_features = bit(X86_FEATURE_FPU) |
-		bit(X86_FEATURE_VME) | bit(X86_FEATURE_DE) |
-		bit(X86_FEATURE_PSE) | bit(X86_FEATURE_TSC) |
-		bit(X86_FEATURE_MSR) | bit(X86_FEATURE_PAE) |
-		bit(X86_FEATURE_CX8) | bit(X86_FEATURE_APIC) |
-		bit(X86_FEATURE_PGE) |
-		bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
-		bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) |
-		bit(X86_FEATURE_SYSCALL) |
-		(is_efer_nx() ? bit(X86_FEATURE_NX) : 0) |
+	unsigned f_nx = is_efer_nx() ? F(NX) : 0;
 #ifdef CONFIG_X86_64
-		bit(X86_FEATURE_LM) |
+	unsigned f_lm = F(LM);
+#else
+	unsigned f_lm = 0;
 #endif
-		bit(X86_FEATURE_FXSR_OPT) |
-		bit(X86_FEATURE_MMXEXT) |
-		bit(X86_FEATURE_3DNOWEXT) |
-		bit(X86_FEATURE_3DNOW);
-	const u32 kvm_supported_word3_x86_features =
-		bit(X86_FEATURE_XMM3) | bit(X86_FEATURE_CX16);
+
+	/* cpuid 1.edx */
+	const u32 kvm_supported_word0_x86_features =
+		F(FPU) | F(VME) | F(DE) | F(PSE) |
+		F(TSC) | F(MSR) | F(PAE) | F(MCE) |
+		F(CX8) | F(APIC) | 0 /* Reserved */ | F(SEP) |
+		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
+		F(PAT) | F(PSE36) | 0 /* PSN */ | F(CLFLSH) |
+		0 /* Reserved, DS, ACPI */ | F(MMX) |
+		F(FXSR) | F(XMM) | F(XMM2) | F(SELFSNOOP) |
+		0 /* HTT, TM, Reserved, PBE */;
+	/* cpuid 0x80000001.edx */
+	const u32 kvm_supported_word1_x86_features =
+		F(FPU) | F(VME) | F(DE) | F(PSE) |
+		F(TSC) | F(MSR) | F(PAE) | F(MCE) |
+		F(CX8) | F(APIC) | 0 /* Reserved */ | F(SYSCALL) |
+		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
+		F(PAT) | F(PSE36) | 0 /* Reserved */ |
+		f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
+		F(FXSR) | F(FXSR_OPT) | 0 /* GBPAGES */ | 0 /* RDTSCP */ |
+		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
+	/* cpuid 1.ecx */
+	const u32 kvm_supported_word4_x86_features =
+		F(XMM3) | 0 /* Reserved, DTES64, MONITOR */ |
+		0 /* DS-CPL, VMX, SMX, EST */ |
+		0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
+		0 /* Reserved */ | F(CX16) | 0 /* xTPR Update, PDCM */ |
+		0 /* Reserved, DCA */ | F(XMM4_1) |
+		F(XMM4_2) | 0 /* x2APIC */ | F(MOVBE) | F(POPCNT) |
+		0 /* Reserved, XSAVE, OSXSAVE */;
+	/* cpuid 0x80000001.ecx */
 	const u32 kvm_supported_word6_x86_features =
-		bit(X86_FEATURE_LAHF_LM) | bit(X86_FEATURE_CMP_LEGACY) |
-		bit(X86_FEATURE_SVM);
+		F(LAHF_LM) | F(CMP_LEGACY) | F(SVM) | 0 /* ExtApicSpace */ |
+		F(CR8_LEGACY) | F(ABM) | F(SSE4A) | F(MISALIGNSSE) |
+		F(3DNOWPREFETCH) | 0 /* OSVW */ | 0 /* IBS */ | F(SSE5) |
+		0 /* SKINIT */ | 0 /* WDT */;
 
 	/* all calls to cpuid_count() should be made on the same cpu */
 	get_cpu();
@@ -1284,7 +1306,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		break;
 	case 1:
 		entry->edx &= kvm_supported_word0_x86_features;
-		entry->ecx &= kvm_supported_word3_x86_features;
+		entry->ecx &= kvm_supported_word4_x86_features;
 		break;
 	/* function 2 entries are STATEFUL. That is, repeated cpuid commands
 	 * may return different values. This forces us to get_cpu() before
@@ -1346,6 +1368,8 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	put_cpu();
 }
 
+#undef F
+
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				     struct kvm_cpuid_entry2 __user *entries)
 {
@@ -1417,8 +1441,7 @@ static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 		return -ENXIO;
 	vcpu_load(vcpu);
 
-	set_bit(irq->irq, vcpu->arch.irq_pending);
-	set_bit(irq->irq / BITS_PER_LONG, &vcpu->arch.irq_summary);
+	kvm_queue_interrupt(vcpu, irq->irq, false);
 
 	vcpu_put(vcpu);
 
@@ -1580,8 +1603,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = -EINVAL;
 	}
 out:
-	if (lapic)
-		kfree(lapic);
+	kfree(lapic);
 	return r;
 }
 
@@ -1602,10 +1624,12 @@ static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
 		return -EINVAL;
 
 	down_write(&kvm->slots_lock);
+	spin_lock(&kvm->mmu_lock);
 
 	kvm_mmu_change_mmu_pages(kvm, kvm_nr_mmu_pages);
 	kvm->arch.n_requested_mmu_pages = kvm_nr_mmu_pages;
 
+	spin_unlock(&kvm->mmu_lock);
 	up_write(&kvm->slots_lock);
 	return 0;
 }
@@ -1781,7 +1805,9 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
+		spin_lock(&kvm->mmu_lock);
 		kvm_mmu_slot_remove_write_access(kvm, log->slot);
+		spin_unlock(&kvm->mmu_lock);
 		kvm_flush_remote_tlbs(kvm);
 		memslot = &kvm->memslots[log->slot];
 		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
@@ -2356,7 +2382,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 			u16 error_code,
 			int emulation_type)
 {
-	int r;
+	int r, shadow_mask;
 	struct decode_cache *c;
 
 	kvm_clear_exception_queue(vcpu);
@@ -2404,7 +2430,16 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		}
 	}
 
+	if (emulation_type & EMULTYPE_SKIP) {
+		kvm_rip_write(vcpu, vcpu->arch.emulate_ctxt.decode.eip);
+		return EMULATE_DONE;
+	}
+
 	r = x86_emulate_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
+	shadow_mask = vcpu->arch.emulate_ctxt.interruptibility;
+
+	if (r == 0)
+		kvm_x86_ops->set_interrupt_shadow(vcpu, shadow_mask);
 
 	if (vcpu->arch.pio.string)
 		return EMULATE_DO_MMIO;
@@ -2757,7 +2792,7 @@ int kvm_arch_init(void *opaque)
 	kvm_mmu_set_nonpresent_ptes(0ull, 0ull);
 	kvm_mmu_set_base_ptes(PT_PRESENT_MASK);
 	kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
-			PT_DIRTY_MASK, PT64_NX_MASK, 0, 0);
+			PT_DIRTY_MASK, PT64_NX_MASK, 0);
 
 	for_each_possible_cpu(cpu)
 		per_cpu(cpu_tsc_khz, cpu) = tsc_khz;
@@ -3008,6 +3043,16 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 	return best;
 }
 
+int cpuid_maxphyaddr(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0);
+	if (best)
+		return best->eax & 0xff;
+	return 36;
+}
+
 void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 {
 	u32 function, index;
@@ -3044,10 +3089,9 @@ EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);
 static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu,
 					  struct kvm_run *kvm_run)
 {
-	return (!vcpu->arch.irq_summary &&
+	return (!irqchip_in_kernel(vcpu->kvm) && !kvm_cpu_has_interrupt(vcpu) &&
 		kvm_run->request_interrupt_window &&
-		vcpu->arch.interrupt_window_open &&
-		(kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_IF));
+		kvm_arch_interrupt_allowed(vcpu));
 }
 
 static void post_kvm_run_save(struct kvm_vcpu *vcpu,
@@ -3060,8 +3104,9 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu,
 		kvm_run->ready_for_interrupt_injection = 1;
 	else
 		kvm_run->ready_for_interrupt_injection =
-					(vcpu->arch.interrupt_window_open &&
-					 vcpu->arch.irq_summary == 0);
+			kvm_arch_interrupt_allowed(vcpu) &&
+			!kvm_cpu_has_interrupt(vcpu) &&
+			!kvm_event_needs_reinjection(vcpu);
 }
 
 static void vapic_enter(struct kvm_vcpu *vcpu)
@@ -3090,9 +3135,63 @@ static void vapic_exit(struct kvm_vcpu *vcpu)
 	up_read(&vcpu->kvm->slots_lock);
 }
 
+static void update_cr8_intercept(struct kvm_vcpu *vcpu)
+{
+	int max_irr, tpr;
+
+	if (!kvm_x86_ops->update_cr8_intercept)
+		return;
+
+	if (!vcpu->arch.apic->vapic_addr)
+		max_irr = kvm_lapic_find_highest_irr(vcpu);
+	else
+		max_irr = -1;
+
+	if (max_irr != -1)
+		max_irr >>= 4;
+
+	tpr = kvm_lapic_get_cr8(vcpu);
+
+	kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
+}
+
+static void inject_pending_irq(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		kvm_x86_ops->set_interrupt_shadow(vcpu, 0);
+
+	/* try to reinject previous events if any */
+	if (vcpu->arch.nmi_injected) {
+		kvm_x86_ops->set_nmi(vcpu);
+		return;
+	}
+
+	if (vcpu->arch.interrupt.pending) {
+		kvm_x86_ops->set_irq(vcpu);
+		return;
+	}
+
+	/* try to inject new event if pending */
+	if (vcpu->arch.nmi_pending) {
+		if (kvm_x86_ops->nmi_allowed(vcpu)) {
+			vcpu->arch.nmi_pending = false;
+			vcpu->arch.nmi_injected = true;
+			kvm_x86_ops->set_nmi(vcpu);
+		}
+	} else if (kvm_cpu_has_interrupt(vcpu)) {
+		if (kvm_x86_ops->interrupt_allowed(vcpu)) {
+			kvm_queue_interrupt(vcpu, kvm_cpu_get_interrupt(vcpu),
+					    false);
+			kvm_x86_ops->set_irq(vcpu);
+		}
+	}
+}
+
 static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	int r;
+	bool req_int_win = !irqchip_in_kernel(vcpu->kvm) &&
+		kvm_run->request_interrupt_window;
 
 	if (vcpu->requests)
 		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
@@ -3124,9 +3223,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		}
 	}
 
-	clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
-	kvm_inject_pending_timer_irqs(vcpu);
-
 	preempt_disable();
 
 	kvm_x86_ops->prepare_guest_switch(vcpu);
@@ -3134,6 +3230,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	local_irq_disable();
 
+	clear_bit(KVM_REQ_KICK, &vcpu->requests);
+	smp_mb__after_clear_bit();
+
 	if (vcpu->requests || need_resched() || signal_pending(current)) {
 		local_irq_enable();
 		preempt_enable();
@@ -3141,21 +3240,21 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		goto out;
 	}
 
-	vcpu->guest_mode = 1;
-	/*
-	 * Make sure that guest_mode assignment won't happen after
-	 * testing the pending IRQ vector bitmap.
-	 */
-	smp_wmb();
-
 	if (vcpu->arch.exception.pending)
 		__queue_exception(vcpu);
-	else if (irqchip_in_kernel(vcpu->kvm))
-		kvm_x86_ops->inject_pending_irq(vcpu);
 	else
-		kvm_x86_ops->inject_pending_vectors(vcpu, kvm_run);
+		inject_pending_irq(vcpu, kvm_run);
+
+	/* enable NMI/IRQ window open exits if needed */
+	if (vcpu->arch.nmi_pending)
+		kvm_x86_ops->enable_nmi_window(vcpu);
+	else if (kvm_cpu_has_interrupt(vcpu) || req_int_win)
+		kvm_x86_ops->enable_irq_window(vcpu);
 
-	kvm_lapic_sync_to_vapic(vcpu);
+	if (kvm_lapic_enabled(vcpu)) {
+		update_cr8_intercept(vcpu);
+		kvm_lapic_sync_to_vapic(vcpu);
+	}
 
 	up_read(&vcpu->kvm->slots_lock);
 
@@ -3189,7 +3288,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	set_debugreg(vcpu->arch.host_dr6, 6);
 	set_debugreg(vcpu->arch.host_dr7, 7);
 
-	vcpu->guest_mode = 0;
+	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
 
 	++vcpu->stat.exits;
@@ -3216,8 +3315,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		profile_hit(KVM_PROFILING, (void *)rip);
 	}
 
-	if (vcpu->arch.exception.pending && kvm_x86_ops->exception_injected(vcpu))
-		vcpu->arch.exception.pending = false;
 
 	kvm_lapic_sync_from_vapic(vcpu);
 
@@ -3226,6 +3323,7 @@ out:
 	return r;
 }
 
+
 static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	int r;
@@ -3252,29 +3350,42 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			kvm_vcpu_block(vcpu);
 			down_read(&vcpu->kvm->slots_lock);
 			if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
-				if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
+			{
+				switch(vcpu->arch.mp_state) {
+				case KVM_MP_STATE_HALTED:
 					vcpu->arch.mp_state =
-							KVM_MP_STATE_RUNNABLE;
-			if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
-				r = -EINTR;
+						KVM_MP_STATE_RUNNABLE;
+				case KVM_MP_STATE_RUNNABLE:
+					break;
+				case KVM_MP_STATE_SIPI_RECEIVED:
+				default:
+					r = -EINTR;
+					break;
+				}
+			}
 		}
 
-		if (r > 0) {
-			if (dm_request_for_irq_injection(vcpu, kvm_run)) {
-				r = -EINTR;
-				kvm_run->exit_reason = KVM_EXIT_INTR;
-				++vcpu->stat.request_irq_exits;
-			}
-			if (signal_pending(current)) {
-				r = -EINTR;
-				kvm_run->exit_reason = KVM_EXIT_INTR;
-				++vcpu->stat.signal_exits;
-			}
-			if (need_resched()) {
-				up_read(&vcpu->kvm->slots_lock);
-				kvm_resched(vcpu);
-				down_read(&vcpu->kvm->slots_lock);
-			}
+		if (r <= 0)
+			break;
+
+		clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+		if (kvm_cpu_has_pending_timer(vcpu))
+			kvm_inject_pending_timer_irqs(vcpu);
+
+		if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+			r = -EINTR;
+			kvm_run->exit_reason = KVM_EXIT_INTR;
+			++vcpu->stat.request_irq_exits;
+		}
+		if (signal_pending(current)) {
+			r = -EINTR;
+			kvm_run->exit_reason = KVM_EXIT_INTR;
+			++vcpu->stat.signal_exits;
+		}
+		if (need_resched()) {
+			up_read(&vcpu->kvm->slots_lock);
+			kvm_resched(vcpu);
+			down_read(&vcpu->kvm->slots_lock);
 		}
 	}
 
@@ -3438,7 +3549,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 				  struct kvm_sregs *sregs)
 {
 	struct descriptor_table dt;
-	int pending_vec;
 
 	vcpu_load(vcpu);
 
@@ -3468,16 +3578,11 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 	sregs->efer = vcpu->arch.shadow_efer;
 	sregs->apic_base = kvm_get_apic_base(vcpu);
 
-	if (irqchip_in_kernel(vcpu->kvm)) {
-		memset(sregs->interrupt_bitmap, 0,
-		       sizeof sregs->interrupt_bitmap);
-		pending_vec = kvm_x86_ops->get_irq(vcpu);
-		if (pending_vec >= 0)
-			set_bit(pending_vec,
-				(unsigned long *)sregs->interrupt_bitmap);
-	} else
-		memcpy(sregs->interrupt_bitmap, vcpu->arch.irq_pending,
-		       sizeof sregs->interrupt_bitmap);
+	memset(sregs->interrupt_bitmap, 0, sizeof sregs->interrupt_bitmap);
+
+	if (vcpu->arch.interrupt.pending && !vcpu->arch.interrupt.soft)
+		set_bit(vcpu->arch.interrupt.nr,
+			(unsigned long *)sregs->interrupt_bitmap);
 
 	vcpu_put(vcpu);
 
@@ -3684,7 +3789,6 @@ static void save_state_to_tss32(struct kvm_vcpu *vcpu,
 	tss->fs = get_segment_selector(vcpu, VCPU_SREG_FS);
 	tss->gs = get_segment_selector(vcpu, VCPU_SREG_GS);
 	tss->ldt_selector = get_segment_selector(vcpu, VCPU_SREG_LDTR);
-	tss->prev_task_link = get_segment_selector(vcpu, VCPU_SREG_TR);
 }
 
 static int load_state_from_tss32(struct kvm_vcpu *vcpu,
@@ -3781,8 +3885,8 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 }
 
 static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       u32 old_tss_base,
-		       struct desc_struct *nseg_desc)
+			      u16 old_tss_sel, u32 old_tss_base,
+			      struct desc_struct *nseg_desc)
 {
 	struct tss_segment_16 tss_segment_16;
 	int ret = 0;
@@ -3801,6 +3905,16 @@ static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
 			   &tss_segment_16, sizeof tss_segment_16))
 		goto out;
 
+	if (old_tss_sel != 0xffff) {
+		tss_segment_16.prev_task_link = old_tss_sel;
+
+		if (kvm_write_guest(vcpu->kvm,
+				    get_tss_base_addr(vcpu, nseg_desc),
+				    &tss_segment_16.prev_task_link,
+				    sizeof tss_segment_16.prev_task_link))
+			goto out;
+	}
+
 	if (load_state_from_tss16(vcpu, &tss_segment_16))
 		goto out;
 
@@ -3810,7 +3924,7 @@ out:
 }
 
 static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       u32 old_tss_base,
+		       u16 old_tss_sel, u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_32 tss_segment_32;
@@ -3830,6 +3944,16 @@ static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
 			   &tss_segment_32, sizeof tss_segment_32))
 		goto out;
 
+	if (old_tss_sel != 0xffff) {
+		tss_segment_32.prev_task_link = old_tss_sel;
+
+		if (kvm_write_guest(vcpu->kvm,
+				    get_tss_base_addr(vcpu, nseg_desc),
+				    &tss_segment_32.prev_task_link,
+				    sizeof tss_segment_32.prev_task_link))
+			goto out;
+	}
+
 	if (load_state_from_tss32(vcpu, &tss_segment_32))
 		goto out;
 
@@ -3883,14 +4007,22 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 		kvm_x86_ops->set_rflags(vcpu, eflags & ~X86_EFLAGS_NT);
 	}
 
-	kvm_x86_ops->skip_emulated_instruction(vcpu);
+	/* set back link to prev task only if NT bit is set in eflags
+	   note that old_tss_sel is not used afetr this point */
+	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
+		old_tss_sel = 0xffff;
+
+	/* set back link to prev task only if NT bit is set in eflags
+	   note that old_tss_sel is not used afetr this point */
+	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
+		old_tss_sel = 0xffff;
 
 	if (nseg_desc.type & 8)
-		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
-					 &nseg_desc);
+		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_sel,
+					 old_tss_base, &nseg_desc);
 	else
-		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base,
-					 &nseg_desc);
+		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_sel,
+					 old_tss_base, &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
 		u32 eflags = kvm_x86_ops->get_rflags(vcpu);
@@ -3916,7 +4048,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 				  struct kvm_sregs *sregs)
 {
 	int mmu_reset_needed = 0;
-	int i, pending_vec, max_bits;
+	int pending_vec, max_bits;
 	struct descriptor_table dt;
 
 	vcpu_load(vcpu);
@@ -3930,7 +4062,13 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	vcpu->arch.cr2 = sregs->cr2;
 	mmu_reset_needed |= vcpu->arch.cr3 != sregs->cr3;
-	vcpu->arch.cr3 = sregs->cr3;
+
+	down_read(&vcpu->kvm->slots_lock);
+	if (gfn_to_memslot(vcpu->kvm, sregs->cr3 >> PAGE_SHIFT))
+		vcpu->arch.cr3 = sregs->cr3;
+	else
+		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+	up_read(&vcpu->kvm->slots_lock);
 
 	kvm_set_cr8(vcpu, sregs->cr8);
 
@@ -3952,25 +4090,14 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	if (mmu_reset_needed)
 		kvm_mmu_reset_context(vcpu);
 
-	if (!irqchip_in_kernel(vcpu->kvm)) {
-		memcpy(vcpu->arch.irq_pending, sregs->interrupt_bitmap,
-		       sizeof vcpu->arch.irq_pending);
-		vcpu->arch.irq_summary = 0;
-		for (i = 0; i < ARRAY_SIZE(vcpu->arch.irq_pending); ++i)
-			if (vcpu->arch.irq_pending[i])
-				__set_bit(i, &vcpu->arch.irq_summary);
-	} else {
-		max_bits = (sizeof sregs->interrupt_bitmap) << 3;
-		pending_vec = find_first_bit(
-			(const unsigned long *)sregs->interrupt_bitmap,
-			max_bits);
-		/* Only pending external irq is handled here */
-		if (pending_vec < max_bits) {
-			kvm_x86_ops->set_irq(vcpu, pending_vec);
-			pr_debug("Set back pending irq %d\n",
-				 pending_vec);
-		}
-		kvm_pic_clear_isr_ack(vcpu->kvm);
+	max_bits = (sizeof sregs->interrupt_bitmap) << 3;
+	pending_vec = find_first_bit(
+		(const unsigned long *)sregs->interrupt_bitmap, max_bits);
+	if (pending_vec < max_bits) {
+		kvm_queue_interrupt(vcpu, pending_vec, false);
+		pr_debug("Set back pending irq %d\n", pending_vec);
+		if (irqchip_in_kernel(vcpu->kvm))
+			kvm_pic_clear_isr_ack(vcpu->kvm);
 	}
 
 	kvm_set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
@@ -4304,7 +4431,6 @@ struct  kvm *kvm_arch_create_vm(void)
 		return ERR_PTR(-ENOMEM);
 
 	INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);
-	INIT_LIST_HEAD(&kvm->arch.oos_global_pages);
 	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
 
 	/* Reserve bit 0 of irq_sources_bitmap for userspace irq source */
@@ -4407,12 +4533,14 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 		}
 	}
 
+	spin_lock(&kvm->mmu_lock);
 	if (!kvm->arch.n_requested_mmu_pages) {
 		unsigned int nr_mmu_pages = kvm_mmu_calculate_mmu_pages(kvm);
 		kvm_mmu_change_mmu_pages(kvm, nr_mmu_pages);
 	}
 
 	kvm_mmu_slot_remove_write_access(kvm, mem->slot);
+	spin_unlock(&kvm->mmu_lock);
 	kvm_flush_remote_tlbs(kvm);
 
 	return 0;
@@ -4421,6 +4549,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 void kvm_arch_flush_shadow(struct kvm *kvm)
 {
 	kvm_mmu_zap_all(kvm);
+	kvm_reload_remote_mmus(kvm);
 }
 
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
@@ -4430,28 +4559,24 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 	       || vcpu->arch.nmi_pending;
 }
 
-static void vcpu_kick_intr(void *info)
-{
-#ifdef DEBUG
-	struct kvm_vcpu *vcpu = (struct kvm_vcpu *)info;
-	printk(KERN_DEBUG "vcpu_kick_intr %p \n", vcpu);
-#endif
-}
-
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 {
-	int ipi_pcpu = vcpu->cpu;
-	int cpu = get_cpu();
+	int me;
+	int cpu = vcpu->cpu;
 
 	if (waitqueue_active(&vcpu->wq)) {
 		wake_up_interruptible(&vcpu->wq);
 		++vcpu->stat.halt_wakeup;
 	}
-	/*
-	 * We may be called synchronously with irqs disabled in guest mode,
-	 * So need not to call smp_call_function_single() in that case.
-	 */
-	if (vcpu->guest_mode && vcpu->cpu != cpu)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
+
+	me = get_cpu();
+	if (cpu != me && (unsigned)cpu < nr_cpu_ids && cpu_online(cpu))
+		if (!test_and_set_bit(KVM_REQ_KICK, &vcpu->requests))
+			smp_send_reschedule(cpu);
 	put_cpu();
 }
+
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
+{
+	return kvm_x86_ops->interrupt_allowed(vcpu);
+}
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 6a4be78a738..4c8e10af78e 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -8,9 +8,11 @@ static inline void kvm_clear_exception_queue(struct kvm_vcpu *vcpu)
 	vcpu->arch.exception.pending = false;
 }
 
-static inline void kvm_queue_interrupt(struct kvm_vcpu *vcpu, u8 vector)
+static inline void kvm_queue_interrupt(struct kvm_vcpu *vcpu, u8 vector,
+	bool soft)
 {
 	vcpu->arch.interrupt.pending = true;
+	vcpu->arch.interrupt.soft = soft;
 	vcpu->arch.interrupt.nr = vector;
 }
 
@@ -19,4 +21,14 @@ static inline void kvm_clear_interrupt_queue(struct kvm_vcpu *vcpu)
 	vcpu->arch.interrupt.pending = false;
 }
 
+static inline bool kvm_event_needs_reinjection(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.exception.pending || vcpu->arch.interrupt.pending ||
+		vcpu->arch.nmi_injected;
+}
+
+static inline bool kvm_exception_is_soft(unsigned int nr)
+{
+	return (nr == BP_VECTOR) || (nr == OF_VECTOR);
+}
 #endif
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index ca91749d208..c1b6c232e02 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -59,13 +59,14 @@
 #define SrcImm      (5<<4)	/* Immediate operand. */
 #define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
 #define SrcOne      (7<<4)	/* Implied '1' */
-#define SrcMask     (7<<4)
+#define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
+#define SrcMask     (0xf<<4)
 /* Generic ModRM decode. */
-#define ModRM       (1<<7)
+#define ModRM       (1<<8)
 /* Destination is only written; never read. */
-#define Mov         (1<<8)
-#define BitOp       (1<<9)
-#define MemAbs      (1<<10)      /* Memory operand is absolute displacement */
+#define Mov         (1<<9)
+#define BitOp       (1<<10)
+#define MemAbs      (1<<11)      /* Memory operand is absolute displacement */
 #define String      (1<<12)     /* String instruction (rep capable) */
 #define Stack       (1<<13)     /* Stack instruction (push/pop) */
 #define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
@@ -76,6 +77,7 @@
 #define Src2CL      (1<<29)
 #define Src2ImmByte (2<<29)
 #define Src2One     (3<<29)
+#define Src2Imm16   (4<<29)
 #define Src2Mask    (7<<29)
 
 enum {
@@ -135,11 +137,11 @@ static u32 opcode_table[256] = {
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
 	/* 0x70 - 0x77 */
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
 	/* 0x78 - 0x7F */
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
 	/* 0x80 - 0x87 */
 	Group | Group1_80, Group | Group1_81,
 	Group | Group1_82, Group | Group1_83,
@@ -153,7 +155,8 @@ static u32 opcode_table[256] = {
 	/* 0x90 - 0x97 */
 	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
 	/* 0x98 - 0x9F */
-	0, 0, 0, 0, ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
+	0, 0, SrcImm | Src2Imm16, 0,
+	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
 	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
@@ -178,7 +181,8 @@ static u32 opcode_table[256] = {
 	0, ImplicitOps | Stack, 0, 0,
 	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
 	/* 0xC8 - 0xCF */
-	0, 0, 0, ImplicitOps | Stack, 0, 0, 0, 0,
+	0, 0, 0, ImplicitOps | Stack,
+	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
 	/* 0xD0 - 0xD7 */
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
@@ -187,11 +191,11 @@ static u32 opcode_table[256] = {
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xE0 - 0xE7 */
 	0, 0, 0, 0,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	ByteOp | SrcImmUByte, SrcImmUByte,
+	ByteOp | SrcImmUByte, SrcImmUByte,
 	/* 0xE8 - 0xEF */
-	ImplicitOps | Stack, SrcImm | ImplicitOps,
-	ImplicitOps, SrcImmByte | ImplicitOps,
+	SrcImm | Stack, SrcImm | ImplicitOps,
+	SrcImm | Src2Imm16, SrcImmByte | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xF0 - 0xF7 */
@@ -230,10 +234,8 @@ static u32 twobyte_table[256] = {
 	/* 0x70 - 0x7F */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x80 - 0x8F */
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, ImplicitOps, ImplicitOps,
+	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
 	/* 0x90 - 0x9F */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xA0 - 0xA7 */
@@ -1044,10 +1046,14 @@ done_prefixes:
 		}
 		break;
 	case SrcImmByte:
+	case SrcImmUByte:
 		c->src.type = OP_IMM;
 		c->src.ptr = (unsigned long *)c->eip;
 		c->src.bytes = 1;
-		c->src.val = insn_fetch(s8, 1, c->eip);
+		if ((c->d & SrcMask) == SrcImmByte)
+			c->src.val = insn_fetch(s8, 1, c->eip);
+		else
+			c->src.val = insn_fetch(u8, 1, c->eip);
 		break;
 	case SrcOne:
 		c->src.bytes = 1;
@@ -1072,6 +1078,12 @@ done_prefixes:
 		c->src2.bytes = 1;
 		c->src2.val = insn_fetch(u8, 1, c->eip);
 		break;
+	case Src2Imm16:
+		c->src2.type = OP_IMM;
+		c->src2.ptr = (unsigned long *)c->eip;
+		c->src2.bytes = 2;
+		c->src2.val = insn_fetch(u16, 2, c->eip);
+		break;
 	case Src2One:
 		c->src2.bytes = 1;
 		c->src2.val = 1;
@@ -1349,6 +1361,20 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
 	return 0;
 }
 
+void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+{
+	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
+	/*
+	 * an sti; sti; sequence only disable interrupts for the first
+	 * instruction. So, if the last instruction, be it emulated or
+	 * not, left the system with the INT_STI flag enabled, it
+	 * means that the last instruction is an sti. We should not
+	 * leave the flag on in this case. The same goes for mov ss
+	 */
+	if (!(int_shadow & mask))
+		ctxt->interruptibility = mask;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -1360,6 +1386,8 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	int io_dir_in;
 	int rc = 0;
 
+	ctxt->interruptibility = 0;
+
 	/* Shadow copy of register state. Committed on successful emulation.
 	 * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
 	 * modify them.
@@ -1531,13 +1559,10 @@ special_insn:
 			return -1;
 		}
 		return 0;
-	case 0x70 ... 0x7f: /* jcc (short) */ {
-		int rel = insn_fetch(s8, 1, c->eip);
-
+	case 0x70 ... 0x7f: /* jcc (short) */
 		if (test_cc(c->b, ctxt->eflags))
-			jmp_rel(c, rel);
+			jmp_rel(c, c->src.val);
 		break;
-	}
 	case 0x80 ... 0x83:	/* Grp1 */
 		switch (c->modrm_reg) {
 		case 0:
@@ -1609,6 +1634,9 @@ special_insn:
 		int err;
 
 		sel = c->src.val;
+		if (c->modrm_reg == VCPU_SREG_SS)
+			toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
+
 		if (c->modrm_reg <= 5) {
 			type_bits = (c->modrm_reg == 1) ? 9 : 1;
 			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
@@ -1769,59 +1797,32 @@ special_insn:
 		break;
 	case 0xe4: 	/* inb */
 	case 0xe5: 	/* in */
-		port = insn_fetch(u8, 1, c->eip);
+		port = c->src.val;
 		io_dir_in = 1;
 		goto do_io;
 	case 0xe6: /* outb */
 	case 0xe7: /* out */
-		port = insn_fetch(u8, 1, c->eip);
+		port = c->src.val;
 		io_dir_in = 0;
 		goto do_io;
 	case 0xe8: /* call (near) */ {
-		long int rel;
-		switch (c->op_bytes) {
-		case 2:
-			rel = insn_fetch(s16, 2, c->eip);
-			break;
-		case 4:
-			rel = insn_fetch(s32, 4, c->eip);
-			break;
-		default:
-			DPRINTF("Call: Invalid op_bytes\n");
-			goto cannot_emulate;
-		}
+		long int rel = c->src.val;
 		c->src.val = (unsigned long) c->eip;
 		jmp_rel(c, rel);
-		c->op_bytes = c->ad_bytes;
 		emulate_push(ctxt);
 		break;
 	}
 	case 0xe9: /* jmp rel */
 		goto jmp;
-	case 0xea: /* jmp far */ {
-		uint32_t eip;
-		uint16_t sel;
-
-		switch (c->op_bytes) {
-		case 2:
-			eip = insn_fetch(u16, 2, c->eip);
-			break;
-		case 4:
-			eip = insn_fetch(u32, 4, c->eip);
-			break;
-		default:
-			DPRINTF("jmp far: Invalid op_bytes\n");
-			goto cannot_emulate;
-		}
-		sel = insn_fetch(u16, 2, c->eip);
-		if (kvm_load_segment_descriptor(ctxt->vcpu, sel, 9, VCPU_SREG_CS) < 0) {
+	case 0xea: /* jmp far */
+		if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
+					VCPU_SREG_CS) < 0) {
 			DPRINTF("jmp far: Failed to load CS descriptor\n");
 			goto cannot_emulate;
 		}
 
-		c->eip = eip;
+		c->eip = c->src.val;
 		break;
-	}
 	case 0xeb:
 	      jmp:		/* jmp rel short */
 		jmp_rel(c, c->src.val);
@@ -1865,6 +1866,7 @@ special_insn:
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
 	case 0xfb: /* sti */
+		toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
 		ctxt->eflags |= X86_EFLAGS_IF;
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
@@ -2039,28 +2041,11 @@ twobyte_insn:
 		if (!test_cc(c->b, ctxt->eflags))
 			c->dst.type = OP_NONE; /* no writeback */
 		break;
-	case 0x80 ... 0x8f: /* jnz rel, etc*/ {
-		long int rel;
-
-		switch (c->op_bytes) {
-		case 2:
-			rel = insn_fetch(s16, 2, c->eip);
-			break;
-		case 4:
-			rel = insn_fetch(s32, 4, c->eip);
-			break;
-		case 8:
-			rel = insn_fetch(s64, 8, c->eip);
-			break;
-		default:
-			DPRINTF("jnz: Invalid op_bytes\n");
-			goto cannot_emulate;
-		}
+	case 0x80 ... 0x8f: /* jnz rel, etc*/
 		if (test_cc(c->b, ctxt->eflags))
-			jmp_rel(c, rel);
+			jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE;
 		break;
-	}
 	case 0xa3:
 	      bt:		/* bt */
 		c->dst.type = OP_NONE;
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 8dab8f7844d..38718041efc 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -2,7 +2,6 @@ config LGUEST_GUEST
 	bool "Lguest guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !X86_PAE
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/lguest/Makefile b/arch/x86/lguest/Makefile
index 27f0c9ed7f6..94e0e54056a 100644
--- a/arch/x86/lguest/Makefile
+++ b/arch/x86/lguest/Makefile
@@ -1 +1,2 @@
 obj-y		:= i386_head.o boot.o
+CFLAGS_boot.o	:= $(call cc-option, -fno-stack-protector)
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index ca7ec44bafc..7bc65f0f62c 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -67,6 +67,7 @@
 #include <asm/mce.h>
 #include <asm/io.h>
 #include <asm/i387.h>
+#include <asm/stackprotector.h>
 #include <asm/reboot.h>		/* for struct machine_ops */
 
 /*G:010 Welcome to the Guest!
@@ -86,7 +87,7 @@ struct lguest_data lguest_data = {
 
 /*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
- * do a normal hypercall.  Each entry in the ring has 4 slots for the hypercall
+ * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
  * and 255 once the Host has finished with it.
  *
@@ -95,7 +96,8 @@ struct lguest_data lguest_data = {
  * effect of causing the Host to run all the stored calls in the ring buffer
  * which empties it for next time! */
 static void async_hcall(unsigned long call, unsigned long arg1,
-			unsigned long arg2, unsigned long arg3)
+			unsigned long arg2, unsigned long arg3,
+			unsigned long arg4)
 {
 	/* Note: This code assumes we're uniprocessor. */
 	static unsigned int next_call;
@@ -107,12 +109,13 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
-		kvm_hypercall3(call, arg1, arg2, arg3);
+		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
 	} else {
 		lguest_data.hcalls[next_call].arg0 = call;
 		lguest_data.hcalls[next_call].arg1 = arg1;
 		lguest_data.hcalls[next_call].arg2 = arg2;
 		lguest_data.hcalls[next_call].arg3 = arg3;
+		lguest_data.hcalls[next_call].arg4 = arg4;
 		/* Arguments must all be written before we mark it to go */
 		wmb();
 		lguest_data.hcall_status[next_call] = 0;
@@ -140,7 +143,7 @@ static void lazy_hcall1(unsigned long call,
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall1(call, arg1);
 	else
-		async_hcall(call, arg1, 0, 0);
+		async_hcall(call, arg1, 0, 0, 0);
 }
 
 static void lazy_hcall2(unsigned long call,
@@ -150,7 +153,7 @@ static void lazy_hcall2(unsigned long call,
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall2(call, arg1, arg2);
 	else
-		async_hcall(call, arg1, arg2, 0);
+		async_hcall(call, arg1, arg2, 0, 0);
 }
 
 static void lazy_hcall3(unsigned long call,
@@ -161,18 +164,38 @@ static void lazy_hcall3(unsigned long call,
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
 		kvm_hypercall3(call, arg1, arg2, arg3);
 	else
-		async_hcall(call, arg1, arg2, arg3);
+		async_hcall(call, arg1, arg2, arg3, 0);
 }
 
+#ifdef CONFIG_X86_PAE
+static void lazy_hcall4(unsigned long call,
+		       unsigned long arg1,
+		       unsigned long arg2,
+		       unsigned long arg3,
+		       unsigned long arg4)
+{
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+	else
+		async_hcall(call, arg1, arg2, arg3, arg4);
+}
+#endif
+
 /* When lazy mode is turned off reset the per-cpu lazy mode variable and then
  * issue the do-nothing hypercall to flush any stored calls. */
-static void lguest_leave_lazy_mode(void)
+static void lguest_leave_lazy_mmu_mode(void)
+{
+	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+	paravirt_leave_lazy_mmu();
+}
+
+static void lguest_end_context_switch(struct task_struct *next)
 {
-	paravirt_leave_lazy(paravirt_get_lazy_mode());
 	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+	paravirt_end_context_switch(next);
 }
 
-/*G:033
+/*G:032
  * After that diversion we return to our first native-instruction
  * replacements: four functions for interrupt control.
  *
@@ -192,30 +215,28 @@ static unsigned long save_fl(void)
 {
 	return lguest_data.irq_enabled;
 }
-PV_CALLEE_SAVE_REGS_THUNK(save_fl);
-
-/* restore_flags() just sets the flags back to the value given. */
-static void restore_fl(unsigned long flags)
-{
-	lguest_data.irq_enabled = flags;
-}
-PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
 
 /* Interrupts go off... */
 static void irq_disable(void)
 {
 	lguest_data.irq_enabled = 0;
 }
+
+/* Let's pause a moment.  Remember how I said these are called so often?
+ * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
+ * break some rules.  In particular, these functions are assumed to save their
+ * own registers if they need to: normal C functions assume they can trash the
+ * eax register.  To use normal C functions, we use
+ * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
+ * C function, then restores it. */
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
+/*:*/
 
-/* Interrupts go on... */
-static void irq_enable(void)
-{
-	lguest_data.irq_enabled = X86_EFLAGS_IF;
-}
-PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
+/* These are in i386_head.S */
+extern void lg_irq_enable(void);
+extern void lg_restore_fl(unsigned long flags);
 
-/*:*/
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
  * since interrupts are rare and we'll just get the interrupt on the next timer
@@ -361,8 +382,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 	case 1:	/* Basic feature request. */
 		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
-		*dx &= 0x07808111;
+		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
+		*dx &= 0x07808151;
 		/* The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
@@ -381,6 +402,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 		if (*ax > 0x80000008)
 			*ax = 0x80000008;
 		break;
+	case 0x80000001:
+		/* Here we should fix nx cap depending on host. */
+		/* For this version of PAE, we just clear NX bit. */
+		*dx &= ~(1 << 20);
+		break;
 	}
 }
 
@@ -514,25 +540,52 @@ static void lguest_write_cr4(unsigned long val)
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
+#ifdef CONFIG_X86_PAE
+	lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
+		    ptep->pte_low, ptep->pte_high);
+#else
 	lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low);
+#endif
 }
 
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	native_set_pte(ptep, pteval);
 	lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls this to set a top-level entry.  Again, we set the entry then
- * tell the Host which top-level page we changed, and the index of the entry we
- * changed. */
+/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+ * to set a middle-level entry when PAE is activated.
+ * Again, we set the entry then tell the Host which page we changed,
+ * and the index of the entry we changed. */
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pud(pud_t *pudp, pud_t pudval)
+{
+	native_set_pud(pudp, pudval);
+
+	/* 32 bytes aligned pdpt address and the index. */
+	lazy_hcall2(LHCALL_SET_PGD, __pa(pudp) & 0xFFFFFFE0,
+		   (__pa(pudp) & 0x1F) / sizeof(pud_t));
+}
+
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
-	*pmdp = pmdval;
+	native_set_pmd(pmdp, pmdval);
 	lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
-		   (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
+		   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
 }
+#else
+
+/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
+ * activated. */
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+	native_set_pmd(pmdp, pmdval);
+	lazy_hcall2(LHCALL_SET_PGD, __pa(pmdp) & PAGE_MASK,
+		   (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
+}
+#endif
 
 /* There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
@@ -545,11 +598,31 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * which brings boot back to 0.25 seconds. */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
-	*ptep = pteval;
+	native_set_pte(ptep, pteval);
 	if (cr3_changed)
 		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte_atomic(ptep, pte);
+	if (cr3_changed)
+		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	native_pte_clear(mm, addr, ptep);
+	lguest_pte_update(mm, addr, ptep);
+}
+
+void lguest_pmd_clear(pmd_t *pmdp)
+{
+	lguest_set_pmd(pmdp, __pmd(0));
+}
+#endif
+
 /* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
@@ -621,13 +694,12 @@ static void __init lguest_init_IRQ(void)
 {
 	unsigned int i;
 
-	for (i = 0; i < LGUEST_IRQS; i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
+	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
 		 * a straightforward 1 to 1 mapping, so force that here. */
-		__get_cpu_var(vector_irq)[vector] = i;
-		if (vector != SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
+		__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
+		if (i != SYSCALL_VECTOR)
+			set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 	/* This call is required to set up for 4k stacks, where we have
 	 * separate stacks for hard and soft interrupts. */
@@ -636,7 +708,7 @@ static void __init lguest_init_IRQ(void)
 
 void lguest_setup_irq(unsigned int irq)
 {
-	irq_to_desc_alloc_cpu(irq, 0);
+	irq_to_desc_alloc_node(irq, 0);
 	set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
 				      handle_level_irq, "level");
 }
@@ -966,10 +1038,10 @@ static void lguest_restart(char *reason)
  *
  * Our current solution is to allow the paravirt back end to optionally patch
  * over the indirect calls to replace them with something more efficient.  We
- * patch the four most commonly called functions: disable interrupts, enable
- * interrupts, restore interrupts and save interrupts.  We usually have 6 or 10
- * bytes to patch into: the Guest versions of these operations are small enough
- * that we can fit comfortably.
+ * patch two of the simplest of the most commonly called functions: disable
+ * interrupts and save interrupts.  We usually have 6 or 10 bytes to patch
+ * into: the Guest versions of these operations are small enough that we can
+ * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
  * and these are in i386_head.S. */
@@ -980,8 +1052,6 @@ static const struct lguest_insns
 	const char *start, *end;
 } lguest_insns[] = {
 	[PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli },
-	[PARAVIRT_PATCH(pv_irq_ops.irq_enable)] = { lgstart_sti, lgend_sti },
-	[PARAVIRT_PATCH(pv_irq_ops.restore_fl)] = { lgstart_popf, lgend_popf },
 	[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
@@ -1019,6 +1089,7 @@ __init void lguest_init(void)
 	pv_info.name = "lguest";
 	pv_info.paravirt_enabled = 1;
 	pv_info.kernel_rpl = 1;
+	pv_info.shared_kernel_pmd = 1;
 
 	/* We set up all the lguest overrides for sensitive operations.  These
 	 * are detailed with the operations themselves. */
@@ -1026,9 +1097,9 @@ __init void lguest_init(void)
 	/* interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
-	pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
 	pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
-	pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
+	pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
 	/* init-time operations */
@@ -1053,8 +1124,8 @@ __init void lguest_init(void)
 	pv_cpu_ops.write_gdt_entry = lguest_write_gdt_entry;
 	pv_cpu_ops.write_idt_entry = lguest_write_idt_entry;
 	pv_cpu_ops.wbinvd = lguest_wbinvd;
-	pv_cpu_ops.lazy_mode.enter = paravirt_enter_lazy_cpu;
-	pv_cpu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+	pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
+	pv_cpu_ops.end_context_switch = lguest_end_context_switch;
 
 	/* pagetable management */
 	pv_mmu_ops.write_cr3 = lguest_write_cr3;
@@ -1064,10 +1135,16 @@ __init void lguest_init(void)
 	pv_mmu_ops.set_pte = lguest_set_pte;
 	pv_mmu_ops.set_pte_at = lguest_set_pte_at;
 	pv_mmu_ops.set_pmd = lguest_set_pmd;
+#ifdef CONFIG_X86_PAE
+	pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
+	pv_mmu_ops.pte_clear = lguest_pte_clear;
+	pv_mmu_ops.pmd_clear = lguest_pmd_clear;
+	pv_mmu_ops.set_pud = lguest_set_pud;
+#endif
 	pv_mmu_ops.read_cr2 = lguest_read_cr2;
 	pv_mmu_ops.read_cr3 = lguest_read_cr3;
 	pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
-	pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+	pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode;
 	pv_mmu_ops.pte_update = lguest_pte_update;
 	pv_mmu_ops.pte_update_defer = lguest_pte_update;
 
@@ -1088,13 +1165,21 @@ __init void lguest_init(void)
 	 * lguest_init() where the rest of the fairly chaotic boot setup
 	 * occurs. */
 
+	/* The stack protector is a weird thing where gcc places a canary
+	 * value on the stack and then checks it on return.  This file is
+	 * compiled with -fno-stack-protector it, so we got this far without
+	 * problems.  The value of the canary is kept at offset 20 from the
+	 * %gs register, so we need to set that up before calling C functions
+	 * in other files. */
+	setup_stack_canary_segment(0);
+	/* We could just call load_stack_canary_segment(), but we might as
+	 * call switch_to_new_gdt() which loads the whole table and sets up
+	 * the per-cpu segment descriptor register %fs as well. */
+	switch_to_new_gdt(0);
+
 	/* As described in head_32.S, we map the first 128M of memory. */
 	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
-	/* Load the %fs segment register (the per-cpu segment register) with
-	 * the normal data segment to get through booting. */
-	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
-
 	/* The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
 	 * it put the answer in lguest_data.reserve_mem  */
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index f7954198947..a9c8cfe61cd 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -46,10 +46,64 @@ ENTRY(lguest_entry)
 	.globl lgstart_##name; .globl lgend_##name
 
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
-LGUEST_PATCH(sti, movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled)
-LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
-/*:*/
+
+/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
+ * matter for save_fl and irq_disable later).  If we write our routines
+ * carefully in assembler, we can avoid clobbering any registers and avoid
+ * jumping through the wrapper functions.
+ *
+ * I skipped over our first piece of assembler, but this one is worth studying
+ * in a bit more detail so I'll describe in easy stages.  First, the routine
+ * to enable interrupts: */
+ENTRY(lg_irq_enable)
+	/* The reverse of irq_disable, this sets lguest_data.irq_enabled to
+	 * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+	movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
+	/* But now we need to check if the Host wants to know: there might have
+	 * been interrupts waiting to be delivered, in which case it will have
+	 * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
+	 * jump to send_interrupts, otherwise we're done. */
+	testl $0, lguest_data+LGUEST_DATA_irq_pending
+	jnz send_interrupts
+	/* One cool thing about x86 is that you can do many things without using
+	 * a register.  In this case, the normal path hasn't needed to save or
+	 * restore any registers at all! */
+	ret
+send_interrupts:
+	/* OK, now we need a register: eax is used for the hypercall number,
+	 * which is LHCALL_SEND_INTERRUPTS.
+	 *
+	 * We used not to bother with this pending detection at all, which was
+	 * much simpler.  Sooner or later the Host would realize it had to
+	 * send us an interrupt.  But that turns out to make performance 7
+	 * times worse on a simple tcp benchmark.  So now we do this the hard
+	 * way. */
+	pushl %eax
+	movl $LHCALL_SEND_INTERRUPTS, %eax
+	/* This is a vmcall instruction (same thing that KVM uses).  Older
+	 * assembler versions might not know the "vmcall" instruction, so we
+	 * create one manually here. */
+	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	popl %eax
+	ret
+
+/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+ * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
+ * enabling interrupts again, if it's 0 we're leaving them off. */
+ENTRY(lg_restore_fl)
+	/* This is just "lguest_data.irq_enabled = flags;" */
+	movl %eax, lguest_data+LGUEST_DATA_irq_enabled
+	/* Now, if the %eax value has enabled interrupts and
+	 * lguest_data.irq_pending is set, we want to tell the Host so it can
+	 * deliver any outstanding interrupts.  Fortunately, both values will
+	 * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
+	 * instruction will AND them together for us.  If both are set, we
+	 * jump to send_interrupts. */
+	testl lguest_data+LGUEST_DATA_irq_pending, %eax
+	jnz send_interrupts
+	/* Again, the normal path has used no extra registers.  Clever, huh? */
+	ret
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 55e11aa6d66..f9d35632666 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile for x86 specific library files.
 #
 
-obj-$(CONFIG_SMP) := msr-on-cpu.o
+obj-$(CONFIG_SMP) := msr.o
 
 lib-y := delay.o
 lib-y += thunk_$(BITS).o
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
deleted file mode 100644
index 321cf720dbb..00000000000
--- a/arch/x86/lib/msr-on-cpu.c
+++ /dev/null
@@ -1,97 +0,0 @@
-#include <linux/module.h>
-#include <linux/preempt.h>
-#include <linux/smp.h>
-#include <asm/msr.h>
-
-struct msr_info {
-	u32 msr_no;
-	u32 l, h;
-	int err;
-};
-
-static void __rdmsr_on_cpu(void *info)
-{
-	struct msr_info *rv = info;
-
-	rdmsr(rv->msr_no, rv->l, rv->h);
-}
-
-static void __wrmsr_on_cpu(void *info)
-{
-	struct msr_info *rv = info;
-
-	wrmsr(rv->msr_no, rv->l, rv->h);
-}
-
-int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
-	int err;
-	struct msr_info rv;
-
-	rv.msr_no = msr_no;
-	err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
-	*l = rv.l;
-	*h = rv.h;
-
-	return err;
-}
-
-int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
-{
-	int err;
-	struct msr_info rv;
-
-	rv.msr_no = msr_no;
-	rv.l = l;
-	rv.h = h;
-	err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
-
-	return err;
-}
-
-/* These "safe" variants are slower and should be used when the target MSR
-   may not actually exist. */
-static void __rdmsr_safe_on_cpu(void *info)
-{
-	struct msr_info *rv = info;
-
-	rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
-}
-
-static void __wrmsr_safe_on_cpu(void *info)
-{
-	struct msr_info *rv = info;
-
-	rv->err = wrmsr_safe(rv->msr_no, rv->l, rv->h);
-}
-
-int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
-	int err;
-	struct msr_info rv;
-
-	rv.msr_no = msr_no;
-	err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
-	*l = rv.l;
-	*h = rv.h;
-
-	return err ? err : rv.err;
-}
-
-int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
-{
-	int err;
-	struct msr_info rv;
-
-	rv.msr_no = msr_no;
-	rv.l = l;
-	rv.h = h;
-	err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
-
-	return err ? err : rv.err;
-}
-
-EXPORT_SYMBOL(rdmsr_on_cpu);
-EXPORT_SYMBOL(wrmsr_on_cpu);
-EXPORT_SYMBOL(rdmsr_safe_on_cpu);
-EXPORT_SYMBOL(wrmsr_safe_on_cpu);
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
new file mode 100644
index 00000000000..1440b9c0547
--- /dev/null
+++ b/arch/x86/lib/msr.c
@@ -0,0 +1,183 @@
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/smp.h>
+#include <asm/msr.h>
+
+struct msr_info {
+	u32 msr_no;
+	struct msr reg;
+	struct msr *msrs;
+	int off;
+	int err;
+};
+
+static void __rdmsr_on_cpu(void *info)
+{
+	struct msr_info *rv = info;
+	struct msr *reg;
+	int this_cpu = raw_smp_processor_id();
+
+	if (rv->msrs)
+		reg = &rv->msrs[this_cpu - rv->off];
+	else
+		reg = &rv->reg;
+
+	rdmsr(rv->msr_no, reg->l, reg->h);
+}
+
+static void __wrmsr_on_cpu(void *info)
+{
+	struct msr_info *rv = info;
+	struct msr *reg;
+	int this_cpu = raw_smp_processor_id();
+
+	if (rv->msrs)
+		reg = &rv->msrs[this_cpu - rv->off];
+	else
+		reg = &rv->reg;
+
+	wrmsr(rv->msr_no, reg->l, reg->h);
+}
+
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+	*l = rv.reg.l;
+	*h = rv.reg.h;
+
+	return err;
+}
+EXPORT_SYMBOL(rdmsr_on_cpu);
+
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	rv.reg.l = l;
+	rv.reg.h = h;
+	err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+
+	return err;
+}
+EXPORT_SYMBOL(wrmsr_on_cpu);
+
+/* rdmsr on a bunch of CPUs
+ *
+ * @mask:       which CPUs
+ * @msr_no:     which MSR
+ * @msrs:       array of MSR values
+ *
+ */
+void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+{
+	struct msr_info rv;
+	int this_cpu;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.off    = cpumask_first(mask);
+	rv.msrs	  = msrs;
+	rv.msr_no = msr_no;
+
+	preempt_disable();
+	/*
+	 * FIXME: handle the CPU we're executing on separately for now until
+	 * smp_call_function_many has been fixed to not skip it.
+	 */
+	this_cpu = raw_smp_processor_id();
+	smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+
+	smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
+	preempt_enable();
+}
+EXPORT_SYMBOL(rdmsr_on_cpus);
+
+/*
+ * wrmsr on a bunch of CPUs
+ *
+ * @mask:       which CPUs
+ * @msr_no:     which MSR
+ * @msrs:       array of MSR values
+ *
+ */
+void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+{
+	struct msr_info rv;
+	int this_cpu;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.off    = cpumask_first(mask);
+	rv.msrs   = msrs;
+	rv.msr_no = msr_no;
+
+	preempt_disable();
+	/*
+	 * FIXME: handle the CPU we're executing on separately for now until
+	 * smp_call_function_many has been fixed to not skip it.
+	 */
+	this_cpu = raw_smp_processor_id();
+	smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+
+	smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
+	preempt_enable();
+}
+EXPORT_SYMBOL(wrmsr_on_cpus);
+
+/* These "safe" variants are slower and should be used when the target MSR
+   may not actually exist. */
+static void __rdmsr_safe_on_cpu(void *info)
+{
+	struct msr_info *rv = info;
+
+	rv->err = rdmsr_safe(rv->msr_no, &rv->reg.l, &rv->reg.h);
+}
+
+static void __wrmsr_safe_on_cpu(void *info)
+{
+	struct msr_info *rv = info;
+
+	rv->err = wrmsr_safe(rv->msr_no, rv->reg.l, rv->reg.h);
+}
+
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
+	*l = rv.reg.l;
+	*h = rv.reg.h;
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(rdmsr_safe_on_cpu);
+
+int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	rv.reg.l = l;
+	rv.reg.h = h;
+	err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(wrmsr_safe_on_cpu);
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index e7277cbcfb4..a725b7f760a 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -161,13 +161,14 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 		   st->current_address >= st->marker[1].start_address) {
 		const char *unit = units;
 		unsigned long delta;
+		int width = sizeof(unsigned long) * 2;
 
 		/*
 		 * Now print the actual finished series
 		 */
-		seq_printf(m, "0x%p-0x%p   ",
-			   (void *)st->start_address,
-			   (void *)st->current_address);
+		seq_printf(m, "0x%0*lx-0x%0*lx   ",
+			   width, st->start_address,
+			   width, st->current_address);
 
 		delta = (st->current_address - st->start_address) >> 10;
 		while (!(delta & 1023) && unit[1]) {
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index a03b7279efa..c6acc632637 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -3,40 +3,17 @@
  *  Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
  *  Copyright (C) 2008-2009, Red Hat Inc., Ingo Molnar
  */
-#include <linux/interrupt.h>
-#include <linux/mmiotrace.h>
-#include <linux/bootmem.h>
-#include <linux/compiler.h>
-#include <linux/highmem.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/vmalloc.h>
-#include <linux/vt_kern.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/kdebug.h>
-#include <linux/errno.h>
-#include <linux/magic.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/tty.h>
-#include <linux/smp.h>
-#include <linux/mm.h>
-
-#include <asm-generic/sections.h>
-
-#include <asm/tlbflush.h>
-#include <asm/pgalloc.h>
-#include <asm/segment.h>
-#include <asm/system.h>
-#include <asm/proto.h>
-#include <asm/traps.h>
-#include <asm/desc.h>
+#include <linux/magic.h>		/* STACK_END_MAGIC		*/
+#include <linux/sched.h>		/* test_thread_flag(), ...	*/
+#include <linux/kdebug.h>		/* oops_begin/end, ...		*/
+#include <linux/module.h>		/* search_exception_table	*/
+#include <linux/bootmem.h>		/* max_low_pfn			*/
+#include <linux/kprobes.h>		/* __kprobes, ...		*/
+#include <linux/mmiotrace.h>		/* kmmio_handler, ...		*/
+#include <linux/perf_counter.h>		/* perf_swcounter_event		*/
+
+#include <asm/traps.h>			/* dotraplinkage, ...		*/
+#include <asm/pgalloc.h>		/* pgd_*(), ...			*/
 
 /*
  * Page fault error code bits:
@@ -225,12 +202,10 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	if (!pmd_present(*pmd_k))
 		return NULL;
 
-	if (!pmd_present(*pmd)) {
+	if (!pmd_present(*pmd))
 		set_pmd(pmd, *pmd_k);
-		arch_flush_lazy_mmu_mode();
-	} else {
+	else
 		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
-	}
 
 	return pmd_k;
 }
@@ -538,8 +513,6 @@ bad:
 static int is_errata93(struct pt_regs *regs, unsigned long address)
 {
 #ifdef CONFIG_X86_64
-	static int once;
-
 	if (address != regs->ip)
 		return 0;
 
@@ -549,10 +522,7 @@ static int is_errata93(struct pt_regs *regs, unsigned long address)
 	address |= 0xffffffffUL << 32;
 	if ((address >= (u64)_stext && address <= (u64)_etext) ||
 	    (address >= MODULES_VADDR && address <= MODULES_END)) {
-		if (!once) {
-			printk(errata93_warning);
-			once = 1;
-		}
+		printk_once(errata93_warning);
 		regs->ip = address;
 		return 1;
 	}
@@ -1044,6 +1014,8 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	if (unlikely(error_code & PF_RSVD))
 		pgtable_bad(regs, error_code, address);
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt, have no user context or are running
 	 * in an atomic region then we must not take the fault:
@@ -1137,10 +1109,15 @@ good_area:
 		return;
 	}
 
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	check_v8086_mode(regs, address, tsk);
 
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 8126e8d1a2a..58f621e8191 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -44,7 +44,6 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
 	set_pte(kmap_pte-idx, mk_pte(page, prot));
-	arch_flush_lazy_mmu_mode();
 
 	return (void *)vaddr;
 }
@@ -74,7 +73,6 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #endif
 	}
 
-	arch_flush_lazy_mmu_mode();
 	pagefault_enable();
 }
 
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 8f307d914c2..f46c340727b 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma,
 	unsigned long sbase = saddr & PUD_MASK;
 	unsigned long s_end = sbase + PUD_SIZE;
 
+	/* Allow segments to share if only one is marked locked */
+	unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+	unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
 	/*
 	 * match the virtual addresses, permission and the alignment of the
 	 * page table page.
 	 */
 	if (pmd_index(addr) != pmd_index(saddr) ||
-	    vma->vm_flags != svma->vm_flags ||
+	    vm_flags != svm_flags ||
 	    sbase < svma->vm_start || svma->vm_end < s_end)
 		return 0;
 
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index ae4f7b5d710..34c1bfb64f1 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -1,3 +1,4 @@
+#include <linux/initrd.h>
 #include <linux/ioport.h>
 #include <linux/swap.h>
 
@@ -10,6 +11,9 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
+#include <asm/tlb.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 unsigned long __initdata e820_table_start;
 unsigned long __meminitdata e820_table_end;
@@ -23,6 +27,69 @@ int direct_gbpages
 #endif
 ;
 
+int nx_enabled;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+static int disable_nx __cpuinitdata;
+
+/*
+ * noexec = on|off
+ *
+ * Control non-executable mappings for processes.
+ *
+ * on      Enable
+ * off     Disable
+ */
+static int __init noexec_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		disable_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		disable_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", noexec_setup);
+#endif
+
+#ifdef CONFIG_X86_PAE
+static void __init set_nx(void)
+{
+	unsigned int v[4], l, h;
+
+	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+
+		if ((v[3] & (1 << 20)) && !disable_nx) {
+			rdmsr(MSR_EFER, l, h);
+			l |= EFER_NX;
+			wrmsr(MSR_EFER, l, h);
+			nx_enabled = 1;
+			__supported_pte_mask |= _PAGE_NX;
+		}
+	}
+}
+#else
+static inline void set_nx(void)
+{
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || disable_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+#endif
+
 static void __init find_early_table_space(unsigned long end, int use_pse,
 					  int use_gbpages)
 {
@@ -66,12 +133,11 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 	 */
 #ifdef CONFIG_X86_32
 	start = 0x7000;
-	e820_table_start = find_e820_area(start, max_pfn_mapped<<PAGE_SHIFT,
-					tables, PAGE_SIZE);
-#else /* CONFIG_X86_64 */
+#else
 	start = 0x8000;
-	e820_table_start = find_e820_area(start, end, tables, PAGE_SIZE);
 #endif
+	e820_table_start = find_e820_area(start, max_pfn_mapped<<PAGE_SHIFT,
+					tables, PAGE_SIZE);
 	if (e820_table_start == -1UL)
 		panic("Cannot find space for the kernel page tables");
 
@@ -159,12 +225,9 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	use_gbpages = direct_gbpages;
 #endif
 
-#ifdef CONFIG_X86_32
-#ifdef CONFIG_X86_PAE
 	set_nx();
 	if (nx_enabled)
 		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
-#endif
 
 	/* Enable PSE if available */
 	if (cpu_has_pse)
@@ -175,7 +238,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 		set_in_cr4(X86_CR4_PGE);
 		__supported_pte_mask |= _PAGE_GLOBAL;
 	}
-#endif
 
 	if (use_gbpages)
 		page_size_mask |= 1 << PG_LEVEL_1G;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 749559ed80f..9ff3c0816d1 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -49,12 +49,9 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 #include <asm/cacheflush.h>
+#include <asm/page_types.h>
 #include <asm/init.h>
 
-unsigned long max_low_pfn_mapped;
-unsigned long max_pfn_mapped;
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 unsigned long highstart_pfn, highend_pfn;
 
 static noinline int do_test_wp_bit(void);
@@ -567,7 +564,7 @@ static inline void save_pg_dir(void)
 }
 #endif /* !CONFIG_ACPI_SLEEP */
 
-void zap_low_mappings(void)
+void zap_low_mappings(bool early)
 {
 	int i;
 
@@ -584,64 +581,16 @@ void zap_low_mappings(void)
 		set_pgd(swapper_pg_dir+i, __pgd(0));
 #endif
 	}
-	flush_tlb_all();
-}
 
-int nx_enabled;
+	if (early)
+		__flush_tlb();
+	else
+		flush_tlb_all();
+}
 
 pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
 EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
-#ifdef CONFIG_X86_PAE
-
-static int disable_nx __initdata;
-
-/*
- * noexec = on|off
- *
- * Control non executable mappings.
- *
- * on      Enable
- * off     Disable
- */
-static int __init noexec_setup(char *str)
-{
-	if (!str || !strcmp(str, "on")) {
-		if (cpu_has_nx) {
-			__supported_pte_mask |= _PAGE_NX;
-			disable_nx = 0;
-		}
-	} else {
-		if (!strcmp(str, "off")) {
-			disable_nx = 1;
-			__supported_pte_mask &= ~_PAGE_NX;
-		} else {
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-early_param("noexec", noexec_setup);
-
-void __init set_nx(void)
-{
-	unsigned int v[4], l, h;
-
-	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
-		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
-		if ((v[3] & (1 << 20)) && !disable_nx) {
-			rdmsr(MSR_EFER, l, h);
-			l |= EFER_NX;
-			wrmsr(MSR_EFER, l, h);
-			nx_enabled = 1;
-			__supported_pte_mask |= _PAGE_NX;
-		}
-	}
-}
-#endif
-
 /* user-defined highmem size */
 static unsigned int highmem_pages = -1;
 
@@ -761,15 +710,15 @@ void __init initmem_init(unsigned long start_pfn,
 	highstart_pfn = highend_pfn = max_pfn;
 	if (max_pfn > max_low_pfn)
 		highstart_pfn = max_low_pfn;
-	memory_present(0, 0, highend_pfn);
 	e820_register_active_regions(0, 0, highend_pfn);
+	sparse_memory_present_with_active_regions(0);
 	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
 		pages_to_mb(highend_pfn - highstart_pfn));
 	num_physpages = highend_pfn;
 	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
 #else
-	memory_present(0, 0, max_low_pfn);
 	e820_register_active_regions(0, 0, max_low_pfn);
+	sparse_memory_present_with_active_regions(0);
 	num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
 #endif
@@ -1011,7 +960,7 @@ void __init mem_init(void)
 		test_wp_bit();
 
 	save_pg_dir();
-	zap_low_mappings();
+	zap_low_mappings(true);
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 1753e8020df..52bb9519bb8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -50,18 +50,8 @@
 #include <asm/cacheflush.h>
 #include <asm/init.h>
 
-/*
- * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
- * The direct mapping extends to max_pfn_mapped, so that we can directly access
- * apertures, ACPI and other tables without having to play with fixmaps.
- */
-unsigned long max_low_pfn_mapped;
-unsigned long max_pfn_mapped;
-
 static unsigned long dma_reserve __initdata;
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 static int __init parse_direct_gbpages_off(char *arg)
 {
 	direct_gbpages = 0;
@@ -85,39 +75,6 @@ early_param("gbpages", parse_direct_gbpages_on);
 pteval_t __supported_pte_mask __read_mostly = ~_PAGE_IOMAP;
 EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
-static int disable_nx __cpuinitdata;
-
-/*
- * noexec=on|off
- * Control non-executable mappings for 64-bit processes.
- *
- * on	Enable (default)
- * off	Disable
- */
-static int __init nonx_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
-		disable_nx = 0;
-	} else if (!strncmp(str, "off", 3)) {
-		disable_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-	}
-	return 0;
-}
-early_param("noexec", nonx_setup);
-
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || disable_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
-}
-
 int force_personality32;
 
 /*
@@ -628,6 +585,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 	early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
 	reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
 }
+#endif
 
 void __init paging_init(void)
 {
@@ -638,11 +596,10 @@ void __init paging_init(void)
 	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
 	max_zone_pfns[ZONE_NORMAL] = max_pfn;
 
-	memory_present(0, 0, max_pfn);
+	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
 	free_area_init_nodes(max_zone_pfns);
 }
-#endif
 
 /*
  * Memory hotplug specific functions
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index 8056545e2d3..fe6f84ca121 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -82,7 +82,6 @@ iounmap_atomic(void *kvaddr, enum km_type type)
 	if (vaddr == __fix_to_virt(FIX_KMAP_BEGIN+idx))
 		kpte_clear_flush(kmap_pte-idx, vaddr);
 
-	arch_flush_lazy_mmu_mode();
 	pagefault_enable();
 }
 EXPORT_SYMBOL_GPL(iounmap_atomic);
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 50dc802a1c4..16ccbd77917 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -32,7 +32,7 @@ struct kmmio_fault_page {
 	struct list_head list;
 	struct kmmio_fault_page *release_next;
 	unsigned long page; /* location of the fault page */
-	bool old_presence; /* page presence prior to arming */
+	pteval_t old_presence; /* page presence prior to arming */
 	bool armed;
 
 	/*
@@ -97,60 +97,62 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr)
 static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page)
 {
 	struct list_head *head;
-	struct kmmio_fault_page *p;
+	struct kmmio_fault_page *f;
 
 	page &= PAGE_MASK;
 	head = kmmio_page_list(page);
-	list_for_each_entry_rcu(p, head, list) {
-		if (p->page == page)
-			return p;
+	list_for_each_entry_rcu(f, head, list) {
+		if (f->page == page)
+			return f;
 	}
 	return NULL;
 }
 
-static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
+static void clear_pmd_presence(pmd_t *pmd, bool clear, pmdval_t *old)
 {
 	pmdval_t v = pmd_val(*pmd);
-	*old = !!(v & _PAGE_PRESENT);
-	v &= ~_PAGE_PRESENT;
-	if (present)
-		v |= _PAGE_PRESENT;
+	if (clear) {
+		*old = v & _PAGE_PRESENT;
+		v &= ~_PAGE_PRESENT;
+	} else	/* presume this has been called with clear==true previously */
+		v |= *old;
 	set_pmd(pmd, __pmd(v));
 }
 
-static void set_pte_presence(pte_t *pte, bool present, bool *old)
+static void clear_pte_presence(pte_t *pte, bool clear, pteval_t *old)
 {
 	pteval_t v = pte_val(*pte);
-	*old = !!(v & _PAGE_PRESENT);
-	v &= ~_PAGE_PRESENT;
-	if (present)
-		v |= _PAGE_PRESENT;
+	if (clear) {
+		*old = v & _PAGE_PRESENT;
+		v &= ~_PAGE_PRESENT;
+	} else	/* presume this has been called with clear==true previously */
+		v |= *old;
 	set_pte_atomic(pte, __pte(v));
 }
 
-static int set_page_presence(unsigned long addr, bool present, bool *old)
+static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 {
 	unsigned int level;
-	pte_t *pte = lookup_address(addr, &level);
+	pte_t *pte = lookup_address(f->page, &level);
 
 	if (!pte) {
-		pr_err("kmmio: no pte for page 0x%08lx\n", addr);
+		pr_err("kmmio: no pte for page 0x%08lx\n", f->page);
 		return -1;
 	}
 
 	switch (level) {
 	case PG_LEVEL_2M:
-		set_pmd_presence((pmd_t *)pte, present, old);
+		clear_pmd_presence((pmd_t *)pte, clear, &f->old_presence);
 		break;
 	case PG_LEVEL_4K:
-		set_pte_presence(pte, present, old);
+		clear_pte_presence(pte, clear, &f->old_presence);
 		break;
 	default:
 		pr_err("kmmio: unexpected page level 0x%x.\n", level);
 		return -1;
 	}
 
-	__flush_tlb_one(addr);
+	__flush_tlb_one(f->page);
 	return 0;
 }
 
@@ -171,9 +173,9 @@ static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 	WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
 	if (f->armed) {
 		pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
-					f->page, f->count, f->old_presence);
+					f->page, f->count, !!f->old_presence);
 	}
-	ret = set_page_presence(f->page, false, &f->old_presence);
+	ret = clear_page_presence(f, true);
 	WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
 	f->armed = true;
 	return ret;
@@ -182,8 +184,7 @@ static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 /** Restore the given page to saved presence state. */
 static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
-	bool tmp;
-	int ret = set_page_presence(f->page, f->old_presence, &tmp);
+	int ret = clear_page_presence(f, false);
 	WARN_ONCE(ret < 0,
 			KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
 	f->armed = false;
@@ -310,7 +311,12 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
 	struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
 
 	if (!ctx->active) {
-		pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+		/*
+		 * debug traps without an active context are due to either
+		 * something external causing them (f.e. using a debugger while
+		 * mmio tracing enabled), or erroneous behaviour
+		 */
+		pr_warning("kmmio: unexpected debug trap on CPU %d.\n",
 							smp_processor_id());
 		goto out;
 	}
@@ -439,12 +445,12 @@ static void rcu_free_kmmio_fault_pages(struct rcu_head *head)
 						head,
 						struct kmmio_delayed_release,
 						rcu);
-	struct kmmio_fault_page *p = dr->release_list;
-	while (p) {
-		struct kmmio_fault_page *next = p->release_next;
-		BUG_ON(p->count);
-		kfree(p);
-		p = next;
+	struct kmmio_fault_page *f = dr->release_list;
+	while (f) {
+		struct kmmio_fault_page *next = f->release_next;
+		BUG_ON(f->count);
+		kfree(f);
+		f = next;
 	}
 	kfree(dr);
 }
@@ -453,19 +459,19 @@ static void remove_kmmio_fault_pages(struct rcu_head *head)
 {
 	struct kmmio_delayed_release *dr =
 		container_of(head, struct kmmio_delayed_release, rcu);
-	struct kmmio_fault_page *p = dr->release_list;
+	struct kmmio_fault_page *f = dr->release_list;
 	struct kmmio_fault_page **prevp = &dr->release_list;
 	unsigned long flags;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
-	while (p) {
-		if (!p->count) {
-			list_del_rcu(&p->list);
-			prevp = &p->release_next;
+	while (f) {
+		if (!f->count) {
+			list_del_rcu(&f->list);
+			prevp = &f->release_next;
 		} else {
-			*prevp = p->release_next;
+			*prevp = f->release_next;
 		}
-		p = p->release_next;
+		f = f->release_next;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
@@ -528,8 +534,8 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 }
 EXPORT_SYMBOL(unregister_kmmio_probe);
 
-static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val,
-								void *args)
+static int
+kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args)
 {
 	struct die_args *arg = args;
 
@@ -544,11 +550,23 @@ static struct notifier_block nb_die = {
 	.notifier_call = kmmio_die_notifier
 };
 
-static int __init init_kmmio(void)
+int kmmio_init(void)
 {
 	int i;
+
 	for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++)
 		INIT_LIST_HEAD(&kmmio_page_table[i]);
+
 	return register_die_notifier(&nb_die);
 }
-fs_initcall(init_kmmio); /* should be before device_initcall() */
+
+void kmmio_cleanup(void)
+{
+	int i;
+
+	unregister_die_notifier(&nb_die);
+	for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) {
+		WARN_ONCE(!list_empty(&kmmio_page_table[i]),
+			KERN_ERR "kmmio_page_table not empty at cleanup, any further tracing will leak memory.\n");
+	}
+}
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 605c8be0621..18d244f7020 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -40,23 +40,22 @@ static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad)
 
 static void __init memtest(u64 pattern, u64 start_phys, u64 size)
 {
-	u64 i, count;
-	u64 *start;
+	u64 *p, *start, *end;
 	u64 start_bad, last_bad;
 	u64 start_phys_aligned;
-	size_t incr;
+	const size_t incr = sizeof(pattern);
 
-	incr = sizeof(pattern);
 	start_phys_aligned = ALIGN(start_phys, incr);
-	count = (size - (start_phys_aligned - start_phys))/incr;
 	start = __va(start_phys_aligned);
+	end = start + (size - (start_phys_aligned - start_phys)) / incr;
 	start_bad = 0;
 	last_bad = 0;
 
-	for (i = 0; i < count; i++)
-		start[i] = pattern;
-	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-		if (*start == pattern)
+	for (p = start; p < end; p++)
+		*p = pattern;
+
+	for (p = start; p < end; p++, start_phys_aligned += incr) {
+		if (*p == pattern)
 			continue;
 		if (start_phys_aligned == last_bad + incr) {
 			last_bad += incr;
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index c9342ed8b40..132772a8ec5 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -451,6 +451,7 @@ void enable_mmiotrace(void)
 
 	if (nommiotrace)
 		pr_info(NAME "MMIO tracing disabled.\n");
+	kmmio_init();
 	enter_uniprocessor();
 	spin_lock_irq(&trace_lock);
 	atomic_inc(&mmiotrace_enabled);
@@ -473,6 +474,7 @@ void disable_mmiotrace(void)
 
 	clear_trace_list(); /* guarantees: no more kmmio callbacks */
 	leave_uniprocessor();
+	kmmio_cleanup();
 	pr_info(NAME "disabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 2d05a12029d..459913beac7 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -179,18 +179,25 @@ static void * __init early_node_mem(int nodeid, unsigned long start,
 }
 
 /* Initialize bootmem allocator for a node */
-void __init setup_node_bootmem(int nodeid, unsigned long start,
-			       unsigned long end)
+void __init
+setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 {
 	unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size;
+	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
 	unsigned long bootmap_start, nodedata_phys;
 	void *bootmap;
-	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
 	int nid;
 
 	if (!end)
 		return;
 
+	/*
+	 * Don't confuse VM with a node that doesn't have the
+	 * minimum amount of memory:
+	 */
+	if (end && (end - start) < NODE_MIN_SIZE)
+		return;
+
 	start = roundup(start, ZONE_ALIGN);
 
 	printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
@@ -272,9 +279,6 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 		reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start,
 				 bootmap_pages<<PAGE_SHIFT, BOOTMEM_DEFAULT);
 
-#ifdef CONFIG_ACPI_NUMA
-	srat_reserve_add_area(nodeid);
-#endif
 	node_set_online(nodeid);
 }
 
@@ -578,21 +582,6 @@ unsigned long __init numa_free_all_bootmem(void)
 	return pages;
 }
 
-void __init paging_init(void)
-{
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
-	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
-	max_zone_pfns[ZONE_NORMAL] = max_pfn;
-
-	sparse_memory_present_with_active_regions(MAX_NUMNODES);
-	sparse_init();
-
-	free_area_init_nodes(max_zone_pfns);
-}
-
 static __init int numa_setup(char *opt)
 {
 	if (!opt)
@@ -606,8 +595,6 @@ static __init int numa_setup(char *opt)
 #ifdef CONFIG_ACPI_NUMA
 	if (!strncmp(opt, "noacpi", 6))
 		acpi_numa = -1;
-	if (!strncmp(opt, "hotadd=", 7))
-		hotadd_percent = simple_strtoul(opt+7, NULL, 10);
 #endif
 	return 0;
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 797f9f107cb..6ce9518fe2a 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -153,7 +153,7 @@ static void __cpa_flush_all(void *arg)
 	 */
 	__flush_tlb_all();
 
-	if (cache && boot_cpu_data.x86_model >= 4)
+	if (cache && boot_cpu_data.x86 >= 4)
 		wbinvd();
 }
 
@@ -208,20 +208,15 @@ static void cpa_flush_array(unsigned long *start, int numpages, int cache,
 			    int in_flags, struct page **pages)
 {
 	unsigned int i, level;
+	unsigned long do_wbinvd = cache && numpages >= 1024; /* 4M threshold */
 
 	BUG_ON(irqs_disabled());
 
-	on_each_cpu(__cpa_flush_range, NULL, 1);
+	on_each_cpu(__cpa_flush_all, (void *) do_wbinvd, 1);
 
-	if (!cache)
+	if (!cache || do_wbinvd)
 		return;
 
-	/* 4M threshold */
-	if (numpages >= 1024) {
-		if (boot_cpu_data.x86_model >= 4)
-			wbinvd();
-		return;
-	}
 	/*
 	 * We only need to flush on one CPU,
 	 * clflush is a MESI-coherent instruction that
@@ -844,13 +839,6 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 
 	vm_unmap_aliases();
 
-	/*
-	 * If we're called with lazy mmu updates enabled, the
-	 * in-memory pte state may be stale.  Flush pending updates to
-	 * bring them up to date.
-	 */
-	arch_flush_lazy_mmu_mode();
-
 	cpa.vaddr = addr;
 	cpa.pages = pages;
 	cpa.numpages = numpages;
@@ -895,13 +883,6 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 	} else
 		cpa_flush_all(cache);
 
-	/*
-	 * If we've been called with lazy mmu updates enabled, then
-	 * make sure that everything gets flushed out before we
-	 * return.
-	 */
-	arch_flush_lazy_mmu_mode();
-
 out:
 	return ret;
 }
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 01765955baa..2dfcbf9df2a 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -31,17 +31,11 @@ static nodemask_t nodes_parsed __initdata;
 static nodemask_t cpu_nodes_parsed __initdata;
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 static struct bootnode nodes_add[MAX_NUMNODES];
-static int found_add_area __initdata;
-int hotadd_percent __initdata = 0;
 
 static int num_node_memblks __initdata;
 static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata;
 static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata;
 
-/* Too small nodes confuse the VM badly. Usually they result
-   from BIOS bugs. */
-#define NODE_MIN_SIZE (4*1024*1024)
-
 static __init int setup_node(int pxm)
 {
 	return acpi_map_pxm_to_node(pxm);
@@ -66,9 +60,6 @@ static __init void cutoff_node(int i, unsigned long start, unsigned long end)
 {
 	struct bootnode *nd = &nodes[i];
 
-	if (found_add_area)
-		return;
-
 	if (nd->start < start) {
 		nd->start = start;
 		if (nd->end < nd->start)
@@ -86,7 +77,6 @@ static __init void bad_srat(void)
 	int i;
 	printk(KERN_ERR "SRAT: SRAT not used.\n");
 	acpi_numa = -1;
-	found_add_area = 0;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
 	for (i = 0; i < MAX_NUMNODES; i++)
@@ -182,24 +172,21 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	       pxm, apic_id, node);
 }
 
-static int update_end_of_memory(unsigned long end) {return -1;}
-static int hotadd_enough_memory(struct bootnode *nd) {return 1;}
 #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
 static inline int save_add_info(void) {return 1;}
 #else
 static inline int save_add_info(void) {return 0;}
 #endif
 /*
- * Update nodes_add and decide if to include add are in the zone.
- * Both SPARSE and RESERVE need nodes_add information.
- * This code supports one contiguous hot add area per node.
+ * Update nodes_add[]
+ * This code supports one contiguous hot add area per node
  */
-static int __init
-reserve_hotadd(int node, unsigned long start, unsigned long end)
+static void __init
+update_nodes_add(int node, unsigned long start, unsigned long end)
 {
 	unsigned long s_pfn = start >> PAGE_SHIFT;
 	unsigned long e_pfn = end >> PAGE_SHIFT;
-	int ret = 0, changed = 0;
+	int changed = 0;
 	struct bootnode *nd = &nodes_add[node];
 
 	/* I had some trouble with strange memory hotadd regions breaking
@@ -210,7 +197,7 @@ reserve_hotadd(int node, unsigned long start, unsigned long end)
 	   mistakes */
 	if ((signed long)(end - start) < NODE_MIN_SIZE) {
 		printk(KERN_ERR "SRAT: Hotplug area too small\n");
-		return -1;
+		return;
 	}
 
 	/* This check might be a bit too strict, but I'm keeping it for now. */
@@ -218,12 +205,7 @@ reserve_hotadd(int node, unsigned long start, unsigned long end)
 		printk(KERN_ERR
 			"SRAT: Hotplug area %lu -> %lu has existing memory\n",
 			s_pfn, e_pfn);
-		return -1;
-	}
-
-	if (!hotadd_enough_memory(&nodes_add[node]))  {
-		printk(KERN_ERR "SRAT: Hotplug area too large\n");
-		return -1;
+		return;
 	}
 
 	/* Looks good */
@@ -245,11 +227,9 @@ reserve_hotadd(int node, unsigned long start, unsigned long end)
 			printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
 	}
 
-	ret = update_end_of_memory(nd->end);
-
 	if (changed)
-	 	printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end);
-	return ret;
+		printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
+				 nd->start, nd->end);
 }
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
@@ -310,13 +290,10 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 	       start, end);
 	e820_register_active_regions(node, start >> PAGE_SHIFT,
 				     end >> PAGE_SHIFT);
-	push_node_boundaries(node, nd->start >> PAGE_SHIFT,
-						nd->end >> PAGE_SHIFT);
 
-	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) &&
-	    (reserve_hotadd(node, start, end) < 0)) {
-		/* Ignore hotadd region. Undo damage */
-		printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
+	if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
+		update_nodes_add(node, start, end);
+		/* restore nodes[node] */
 		*nd = oldnode;
 		if ((nd->start | nd->end) == 0)
 			node_clear(node, nodes_parsed);
@@ -345,9 +322,9 @@ static int __init nodes_cover_memory(const struct bootnode *nodes)
 			pxmram = 0;
 	}
 
-	e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
-	/* We seem to lose 3 pages somewhere. Allow a bit of slack. */
-	if ((long)(e820ram - pxmram) >= 1*1024*1024) {
+	e820ram = max_pfn - (e820_hole_size(0, max_pfn<<PAGE_SHIFT)>>PAGE_SHIFT);
+	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
+	if ((long)(e820ram - pxmram) >= (1<<(20 - PAGE_SHIFT))) {
 		printk(KERN_ERR
 	"SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n",
 			(pxmram << PAGE_SHIFT) >> 20,
@@ -357,17 +334,6 @@ static int __init nodes_cover_memory(const struct bootnode *nodes)
 	return 1;
 }
 
-static void __init unparse_node(int node)
-{
-	int i;
-	node_clear(node, nodes_parsed);
-	node_clear(node, cpu_nodes_parsed);
-	for (i = 0; i < MAX_LOCAL_APIC; i++) {
-		if (apicid_to_node[i] == node)
-			apicid_to_node[i] = NUMA_NO_NODE;
-	}
-}
-
 void __init acpi_numa_arch_fixup(void) {}
 
 /* Use the information discovered above to actually set up the nodes. */
@@ -379,18 +345,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 
 	/* First clean up the node list */
-	for (i = 0; i < MAX_NUMNODES; i++) {
+	for (i = 0; i < MAX_NUMNODES; i++)
 		cutoff_node(i, start, end);
-		/*
-		 * don't confuse VM with a node that doesn't have the
-		 * minimum memory.
-		 */
-		if (nodes[i].end &&
-			(nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
-			unparse_node(i);
-			node_set_offline(i);
-		}
-	}
 
 	if (!nodes_cover_memory(nodes)) {
 		bad_srat();
@@ -423,7 +379,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 
 		if (node == NUMA_NO_NODE)
 			continue;
-		if (!node_isset(node, node_possible_map))
+		if (!node_online(node))
 			numa_clear_node(i);
 	}
 	numa_init_array();
@@ -510,26 +466,6 @@ static int null_slit_node_compare(int a, int b)
 }
 #endif /* CONFIG_NUMA_EMU */
 
-void __init srat_reserve_add_area(int nodeid)
-{
-	if (found_add_area && nodes_add[nodeid].end) {
-		u64 total_mb;
-
-		printk(KERN_INFO "SRAT: Reserving hot-add memory space "
-				"for node %d at %Lx-%Lx\n",
-			nodeid, nodes_add[nodeid].start, nodes_add[nodeid].end);
-		total_mb = (nodes_add[nodeid].end - nodes_add[nodeid].start)
-					>> PAGE_SHIFT;
-		total_mb *= sizeof(struct page);
-		total_mb >>= 20;
-		printk(KERN_INFO "SRAT: This will cost you %Lu MB of "
-				"pre-allocated memory.\n", (unsigned long long)total_mb);
-		reserve_bootmem_node(NODE_DATA(nodeid), nodes_add[nodeid].start,
-			       nodes_add[nodeid].end - nodes_add[nodeid].start,
-			       BOOTMEM_DEFAULT);
-	}
-}
-
 int __node_distance(int a, int b)
 {
 	int index;
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 04df67f8a7b..044897be021 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -76,9 +76,9 @@ void
 x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	struct frame_head *head = (struct frame_head *)frame_pointer(regs);
-	unsigned long stack = kernel_trap_sp(regs);
 
 	if (!user_mode_vm(regs)) {
+		unsigned long stack = kernel_stack_pointer(regs);
 		if (depth)
 			dump_trace(NULL, regs, (unsigned long *)stack, 0,
 				   &backtrace_ops, &depth);
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 202864ad49a..b07dd8d0b32 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -40,8 +40,9 @@ static int profile_exceptions_notify(struct notifier_block *self,
 
 	switch (val) {
 	case DIE_NMI:
-		if (model->check_ctrs(args->regs, &per_cpu(cpu_msrs, cpu)))
-			ret = NOTIFY_STOP;
+	case DIE_NMI_IPI:
+		model->check_ctrs(args->regs, &per_cpu(cpu_msrs, cpu));
+		ret = NOTIFY_STOP;
 		break;
 	default:
 		break;
@@ -134,7 +135,7 @@ static void nmi_cpu_setup(void *dummy)
 static struct notifier_block profile_exceptions_nb = {
 	.notifier_call = profile_exceptions_notify,
 	.next = NULL,
-	.priority = 0
+	.priority = 2
 };
 
 static int nmi_setup(void)
@@ -356,14 +357,11 @@ static void exit_sysfs(void)
 #define exit_sysfs() do { } while (0)
 #endif /* CONFIG_PM */
 
-static int p4force;
-module_param(p4force, int, 0);
-
 static int __init p4_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (!p4force && (cpu_model > 6 || cpu_model == 5))
+	if (cpu_model > 6 || cpu_model == 5)
 		return 0;
 
 #ifndef CONFIG_SMP
@@ -389,10 +387,25 @@ static int __init p4_init(char **cpu_type)
 	return 0;
 }
 
+static int force_arch_perfmon;
+static int force_cpu_type(const char *str, struct kernel_param *kp)
+{
+	if (!strcmp(str, "archperfmon")) {
+		force_arch_perfmon = 1;
+		printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
+	}
+
+	return 0;
+}
+module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
+
 static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
+	if (force_arch_perfmon && cpu_has_arch_perfmon)
+		return 0;
+
 	switch (cpu_model) {
 	case 0 ... 2:
 		*cpu_type = "i386/ppro";
@@ -414,6 +427,13 @@ static int __init ppro_init(char **cpu_type)
 	case 15: case 23:
 		*cpu_type = "i386/core_2";
 		break;
+	case 26:
+		arch_perfmon_setup_counters();
+		*cpu_type = "i386/core_i7";
+		break;
+	case 28:
+		*cpu_type = "i386/atom";
+		break;
 	default:
 		/* Unknown */
 		return 0;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 10131fbdaad..4da7230b3d1 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -18,7 +18,7 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
-#include <asm/intel_arch_perfmon.h>
+#include <asm/perf_counter.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
@@ -136,6 +136,13 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 	u64 val;
 	int i;
 
+	/*
+	 * This can happen if perf counters are in use when
+	 * we steal the die notifier NMI.
+	 */
+	if (unlikely(!reset_value))
+		goto out;
+
 	for (i = 0 ; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
@@ -146,6 +153,7 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 		}
 	}
 
+out:
 	/* Only P6 based Pentium M need to re-unmask the apic vector but it
 	 * doesn't hurt other P6 variant */
 	apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index fecbce6e7d7..0696d506c4a 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		return 0;
 	}
 
+	if (io_apic_assign_pci_irqs)
+		return 0;
+
 	/* Find IRQ routing entry */
 
 	if (!pirq_table)
@@ -1039,56 +1042,15 @@ static void __init pcibios_fixup_irqs(void)
 		pirq_penalty[dev->irq]++;
 	}
 
+	if (io_apic_assign_pci_irqs)
+		return;
+
 	dev = NULL;
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 		if (!pin)
 			continue;
 
-#ifdef CONFIG_X86_IO_APIC
-		/*
-		 * Recalculate IRQ numbers if we use the I/O APIC.
-		 */
-		if (io_apic_assign_pci_irqs) {
-			int irq;
-
-			/*
-			 * interrupt pins are numbered starting from 1
-			 */
-			irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
-				PCI_SLOT(dev->devfn), pin - 1);
-			/*
-			 * Busses behind bridges are typically not listed in the
-			 * MP-table.  In this case we have to look up the IRQ
-			 * based on the parent bus, parent slot, and pin number.
-			 * The SMP code detects such bridged busses itself so we
-			 * should get into this branch reliably.
-			 */
-			if (irq < 0 && dev->bus->parent) {
-				/* go back to the bridge */
-				struct pci_dev *bridge = dev->bus->self;
-				int bus;
-
-				pin = pci_swizzle_interrupt_pin(dev, pin);
-				bus = bridge->bus->number;
-				irq = IO_APIC_get_PCI_irq_vector(bus,
-						PCI_SLOT(bridge->devfn), pin - 1);
-				if (irq >= 0)
-					dev_warn(&dev->dev,
-						"using bridge %s INT %c to "
-							"get IRQ %d\n",
-						 pci_name(bridge),
-						 'A' + pin - 1, irq);
-			}
-			if (irq >= 0) {
-				dev_info(&dev->dev,
-					"PCI->APIC IRQ transform: INT %c "
-						"-> IRQ %d\n",
-					'A' + pin - 1, irq);
-				dev->irq = irq;
-			}
-		}
-#endif
 		/*
 		 * Still no IRQ? Try to lookup one...
 		 */
@@ -1183,6 +1145,19 @@ int __init pcibios_irq_init(void)
 	pcibios_enable_irq = pirq_enable_irq;
 
 	pcibios_fixup_irqs();
+
+	if (io_apic_assign_pci_irqs && pci_routeirq) {
+		struct pci_dev *dev = NULL;
+		/*
+		 * PCI IRQ routing is set up by pci_enable_device(), but we
+		 * also do it here in case there are still broken drivers that
+		 * don't use pci_enable_device().
+		 */
+		printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+		for_each_pci_dev(dev)
+			pirq_enable_irq(dev);
+	}
+
 	return 0;
 }
 
@@ -1213,16 +1188,23 @@ void pcibios_penalize_isa_irq(int irq, int active)
 static int pirq_enable_irq(struct pci_dev *dev)
 {
 	u8 pin;
-	struct pci_dev *temp_dev;
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+	if (pin && !pcibios_lookup_irq(dev, 1)) {
 		char *msg = "";
 
+		if (!io_apic_assign_pci_irqs && dev->irq)
+			return 0;
+
 		if (io_apic_assign_pci_irqs) {
+#ifdef CONFIG_X86_IO_APIC
+			struct pci_dev *temp_dev;
 			int irq;
+			struct io_apic_irq_attr irq_attr;
 
-			irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+			irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+						PCI_SLOT(dev->devfn),
+						pin - 1, &irq_attr);
 			/*
 			 * Busses behind bridges are typically not listed in the MP-table.
 			 * In this case we have to look up the IRQ based on the parent bus,
@@ -1235,7 +1217,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
 
 				pin = pci_swizzle_interrupt_pin(dev, pin);
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
-						PCI_SLOT(bridge->devfn), pin - 1);
+						PCI_SLOT(bridge->devfn),
+						pin - 1, &irq_attr);
 				if (irq >= 0)
 					dev_warn(&dev->dev, "using bridge %s "
 						 "INT %c to get IRQ %d\n",
@@ -1245,12 +1228,15 @@ static int pirq_enable_irq(struct pci_dev *dev)
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
+				io_apic_set_pci_routing(&dev->dev, irq,
+							 &irq_attr);
+				dev->irq = irq;
 				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
 					 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
-				dev->irq = irq;
 				return 0;
 			} else
 				msg = "; probably buggy MP table";
+#endif
 		} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
 			msg = "";
 		else
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 5fa10bb9604..8766b0e216c 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
 		if (!fixmem32)
 			return AE_OK;
 		if ((mcfg_res->start >= fixmem32->address) &&
-		    (mcfg_res->end <= (fixmem32->address +
+		    (mcfg_res->end < (fixmem32->address +
 				      fixmem32->address_length))) {
 			mcfg_res->flags = 1;
 			return AE_CTRL_TERMINATE;
@@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
 		return AE_OK;
 
 	if ((mcfg_res->start >= address.minimum) &&
-	    (mcfg_res->end <= (address.minimum + address.address_length))) {
+	    (mcfg_res->end < (address.minimum + address.address_length))) {
 		mcfg_res->flags = 1;
 		return AE_CTRL_TERMINATE;
 	}
@@ -418,7 +418,7 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 	struct resource mcfg_res;
 
 	mcfg_res.start = start;
-	mcfg_res.end = end;
+	mcfg_res.end = end - 1;
 	mcfg_res.flags = 0;
 
 	acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index 58b32db3312..de2abbd0754 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -3,5 +3,5 @@
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_cpu_$(BITS).o	:= $(nostackp)
 
-obj-$(CONFIG_PM_SLEEP)		+= cpu_$(BITS).o
+obj-$(CONFIG_PM_SLEEP)		+= cpu.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu_64.c b/arch/x86/power/cpu.c
index 5343540f260..d277ef1eea5 100644
--- a/arch/x86/power/cpu_64.c
+++ b/arch/x86/power/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Suspend and hibernation support for x86-64
+ * Suspend support specific for i386/x86-64.
  *
  * Distribute under GPLv2
  *
@@ -8,18 +8,28 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
-#include <linux/smp.h>
 #include <linux/suspend.h>
-#include <asm/proto.h>
-#include <asm/page.h>
+#include <linux/smp.h>
+
 #include <asm/pgtable.h>
+#include <asm/proto.h>
 #include <asm/mtrr.h>
+#include <asm/page.h>
+#include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
 
-static void fix_processor_context(void);
+#ifdef CONFIG_X86_32
+static struct saved_context saved_context;
 
+unsigned long saved_context_ebx;
+unsigned long saved_context_esp, saved_context_ebp;
+unsigned long saved_context_esi, saved_context_edi;
+unsigned long saved_context_eflags;
+#else
+/* CONFIG_X86_64 */
 struct saved_context saved_context;
+#endif
 
 /**
  *	__save_processor_state - save CPU registers before creating a
@@ -38,19 +48,35 @@ struct saved_context saved_context;
  */
 static void __save_processor_state(struct saved_context *ctxt)
 {
+#ifdef CONFIG_X86_32
+	mtrr_save_fixed_ranges(NULL);
+#endif
 	kernel_fpu_begin();
 
 	/*
 	 * descriptor tables
 	 */
+#ifdef CONFIG_X86_32
+	store_gdt(&ctxt->gdt);
+	store_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
 	store_gdt((struct desc_ptr *)&ctxt->gdt_limit);
 	store_idt((struct desc_ptr *)&ctxt->idt_limit);
+#endif
 	store_tr(ctxt->tr);
 
 	/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
 	/*
 	 * segment registers
 	 */
+#ifdef CONFIG_X86_32
+	savesegment(es, ctxt->es);
+	savesegment(fs, ctxt->fs);
+	savesegment(gs, ctxt->gs);
+	savesegment(ss, ctxt->ss);
+#else
+/* CONFIG_X86_64 */
 	asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
 	asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
 	asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
@@ -62,30 +88,87 @@ static void __save_processor_state(struct saved_context *ctxt)
 	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
 	mtrr_save_fixed_ranges(NULL);
 
+	rdmsrl(MSR_EFER, ctxt->efer);
+#endif
+
 	/*
 	 * control registers
 	 */
-	rdmsrl(MSR_EFER, ctxt->efer);
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
+#ifdef CONFIG_X86_32
+	ctxt->cr4 = read_cr4_safe();
+#else
+/* CONFIG_X86_64 */
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
+#endif
 }
 
+/* Needed by apm.c */
 void save_processor_state(void)
 {
 	__save_processor_state(&saved_context);
 }
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(save_processor_state);
+#endif
 
 static void do_fpu_end(void)
 {
 	/*
-	 * Restore FPU regs if necessary
+	 * Restore FPU regs if necessary.
 	 */
 	kernel_fpu_end();
 }
 
+static void fix_processor_context(void)
+{
+	int cpu = smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+
+	set_tss_desc(cpu, t);	/*
+				 * This just modifies memory; should not be
+				 * necessary. But... This is necessary, because
+				 * 386 hardware has concept of busy TSS or some
+				 * similar stupidity.
+				 */
+
+#ifdef CONFIG_X86_64
+	get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
+
+	syscall_init();				/* This sets MSR_*STAR and related */
+#endif
+	load_TR_desc();				/* This does ltr */
+	load_LDT(&current->active_mm->context);	/* This does lldt */
+
+	/*
+	 * Now maybe reload the debug registers
+	 */
+	if (current->thread.debugreg7) {
+#ifdef CONFIG_X86_32
+		set_debugreg(current->thread.debugreg0, 0);
+		set_debugreg(current->thread.debugreg1, 1);
+		set_debugreg(current->thread.debugreg2, 2);
+		set_debugreg(current->thread.debugreg3, 3);
+		/* no 4 and 5 */
+		set_debugreg(current->thread.debugreg6, 6);
+		set_debugreg(current->thread.debugreg7, 7);
+#else
+		/* CONFIG_X86_64 */
+		loaddebug(&current->thread, 0);
+		loaddebug(&current->thread, 1);
+		loaddebug(&current->thread, 2);
+		loaddebug(&current->thread, 3);
+		/* no 4 and 5 */
+		loaddebug(&current->thread, 6);
+		loaddebug(&current->thread, 7);
+#endif
+	}
+
+}
+
 /**
  *	__restore_processor_state - restore the contents of CPU registers saved
  *		by __save_processor_state()
@@ -96,9 +179,16 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
+	/* cr4 was introduced in the Pentium CPU */
+#ifdef CONFIG_X86_32
+	if (ctxt->cr4)
+		write_cr4(ctxt->cr4);
+#else
+/* CONFIG X86_64 */
 	wrmsrl(MSR_EFER, ctxt->efer);
 	write_cr8(ctxt->cr8);
 	write_cr4(ctxt->cr4);
+#endif
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
@@ -107,13 +197,31 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	 * now restore the descriptor tables to their proper values
 	 * ltr is done i fix_processor_context().
 	 */
+#ifdef CONFIG_X86_32
+	load_gdt(&ctxt->gdt);
+	load_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
 	load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
 	load_idt((const struct desc_ptr *)&ctxt->idt_limit);
-
+#endif
 
 	/*
 	 * segment registers
 	 */
+#ifdef CONFIG_X86_32
+	loadsegment(es, ctxt->es);
+	loadsegment(fs, ctxt->fs);
+	loadsegment(gs, ctxt->gs);
+	loadsegment(ss, ctxt->ss);
+
+	/*
+	 * sysenter MSRs
+	 */
+	if (boot_cpu_has(X86_FEATURE_SEP))
+		enable_sep_cpu();
+#else
+/* CONFIG_X86_64 */
 	asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
 	asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
 	asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
@@ -123,6 +231,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	wrmsrl(MSR_FS_BASE, ctxt->fs_base);
 	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
 	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+#endif
 
 	/*
 	 * restore XCR0 for xsave capable cpu's.
@@ -134,41 +243,17 @@ static void __restore_processor_state(struct saved_context *ctxt)
 
 	do_fpu_end();
 	mtrr_ap_init();
+
+#ifdef CONFIG_X86_32
+	mcheck_init(&boot_cpu_data);
+#endif
 }
 
+/* Needed by apm.c */
 void restore_processor_state(void)
 {
 	__restore_processor_state(&saved_context);
 }
-
-static void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	/*
-	 * This just modifies memory; should not be necessary. But... This
-	 * is necessary, because 386 hardware has concept of busy TSS or some
-	 * similar stupidity.
-	 */
-	set_tss_desc(cpu, t);
-
-	get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
-
-	syscall_init();                         /* This sets MSR_*STAR and related */
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7){
-                loaddebug(&current->thread, 0);
-                loaddebug(&current->thread, 1);
-                loaddebug(&current->thread, 2);
-                loaddebug(&current->thread, 3);
-                /* no 4 and 5 */
-                loaddebug(&current->thread, 6);
-                loaddebug(&current->thread, 7);
-	}
-}
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(restore_processor_state);
+#endif
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
deleted file mode 100644
index ce702c5b3a2..00000000000
--- a/arch/x86/power/cpu_32.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Suspend support specific for i386.
- *
- * Distribute under GPLv2
- *
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
- */
-
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/xcr.h>
-#include <asm/suspend.h>
-
-static struct saved_context saved_context;
-
-unsigned long saved_context_ebx;
-unsigned long saved_context_esp, saved_context_ebp;
-unsigned long saved_context_esi, saved_context_edi;
-unsigned long saved_context_eflags;
-
-static void __save_processor_state(struct saved_context *ctxt)
-{
-	mtrr_save_fixed_ranges(NULL);
-	kernel_fpu_begin();
-
-	/*
-	 * descriptor tables
-	 */
-	store_gdt(&ctxt->gdt);
-	store_idt(&ctxt->idt);
-	store_tr(ctxt->tr);
-
-	/*
-	 * segment registers
-	 */
-	savesegment(es, ctxt->es);
-	savesegment(fs, ctxt->fs);
-	savesegment(gs, ctxt->gs);
-	savesegment(ss, ctxt->ss);
-
-	/*
-	 * control registers
-	 */
-	ctxt->cr0 = read_cr0();
-	ctxt->cr2 = read_cr2();
-	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4_safe();
-}
-
-/* Needed by apm.c */
-void save_processor_state(void)
-{
-	__save_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(save_processor_state);
-
-static void do_fpu_end(void)
-{
-	/*
-	 * Restore FPU regs if necessary.
-	 */
-	kernel_fpu_end();
-}
-
-static void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	set_tss_desc(cpu, t);	/*
-				 * This just modifies memory; should not be
-				 * necessary. But... This is necessary, because
-				 * 386 hardware has concept of busy TSS or some
-				 * similar stupidity.
-				 */
-
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
-
-}
-
-static void __restore_processor_state(struct saved_context *ctxt)
-{
-	/*
-	 * control registers
-	 */
-	/* cr4 was introduced in the Pentium CPU */
-	if (ctxt->cr4)
-		write_cr4(ctxt->cr4);
-	write_cr3(ctxt->cr3);
-	write_cr2(ctxt->cr2);
-	write_cr0(ctxt->cr0);
-
-	/*
-	 * now restore the descriptor tables to their proper values
-	 * ltr is done i fix_processor_context().
-	 */
-	load_gdt(&ctxt->gdt);
-	load_idt(&ctxt->idt);
-
-	/*
-	 * segment registers
-	 */
-	loadsegment(es, ctxt->es);
-	loadsegment(fs, ctxt->fs);
-	loadsegment(gs, ctxt->gs);
-	loadsegment(ss, ctxt->ss);
-
-	/*
-	 * sysenter MSRs
-	 */
-	if (boot_cpu_has(X86_FEATURE_SEP))
-		enable_sep_cpu();
-
-	/*
-	 * restore XCR0 for xsave capable cpu's.
-	 */
-	if (cpu_has_xsave)
-		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
-
-	fix_processor_context();
-	do_fpu_end();
-	mtrr_ap_init();
-	mcheck_init(&boot_cpu_data);
-}
-
-/* Needed by apm.c */
-void restore_processor_state(void)
-{
-	__restore_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(restore_processor_state);
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 1241f118ab5..58bc00f68b1 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -338,6 +338,8 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		}
 	}
 
+	current->mm->context.vdso = (void *)addr;
+
 	if (compat_uses_vma || !compat) {
 		/*
 		 * MAYWRITE to allow gdb to COW and set breakpoints
@@ -358,11 +360,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 			goto up_fail;
 	}
 
-	current->mm->context.vdso = (void *)addr;
 	current_thread_info()->sysenter_return =
 		VDSO32_SYMBOL(addr, SYSENTER_RETURN);
 
   up_fail:
+	if (ret)
+		current->mm->context.vdso = NULL;
+
 	up_write(&mm->mmap_sem);
 
 	return ret;
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 7133cdf9098..21e1aeb9f3e 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -8,6 +8,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/random.h>
+#include <linux/elf.h>
 #include <asm/vsyscall.h>
 #include <asm/vgtod.h>
 #include <asm/proto.h>
@@ -115,15 +116,18 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		goto up_fail;
 	}
 
+	current->mm->context.vdso = (void *)addr;
+
 	ret = install_special_mapping(mm, addr, vdso_size,
 				      VM_READ|VM_EXEC|
 				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				      VM_ALWAYSDUMP,
 				      vdso_pages);
-	if (ret)
+	if (ret) {
+		current->mm->context.vdso = NULL;
 		goto up_fail;
+	}
 
-	current->mm->context.vdso = (void *)addr;
 up_fail:
 	up_write(&mm->mmap_sem);
 	return ret;
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 3b767d03fd6..172438f86a0 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -9,5 +9,6 @@ obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
 			grant-table.o suspend.o
 
-obj-$(CONFIG_SMP)		+= smp.o spinlock.o
-obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
\ No newline at end of file
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f09e8c36ee8..0a1700a2be9 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/start_kernel.h>
 #include <linux/sched.h>
+#include <linux/kprobes.h>
 #include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/mm.h>
@@ -44,6 +45,7 @@
 #include <asm/processor.h>
 #include <asm/proto.h>
 #include <asm/msr-index.h>
+#include <asm/traps.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
@@ -240,10 +242,10 @@ static unsigned long xen_get_debugreg(int reg)
 	return HYPERVISOR_get_debugreg(reg);
 }
 
-void xen_leave_lazy(void)
+static void xen_end_context_switch(struct task_struct *next)
 {
-	paravirt_leave_lazy(paravirt_get_lazy_mode());
 	xen_mc_flush();
+	paravirt_end_context_switch(next);
 }
 
 static unsigned long xen_store_tr(void)
@@ -428,11 +430,44 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 static int cvt_gate_to_trap(int vector, const gate_desc *val,
 			    struct trap_info *info)
 {
+	unsigned long addr;
+
 	if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
 		return 0;
 
 	info->vector = vector;
-	info->address = gate_offset(*val);
+
+	addr = gate_offset(*val);
+#ifdef CONFIG_X86_64
+	/*
+	 * Look for known traps using IST, and substitute them
+	 * appropriately.  The debugger ones are the only ones we care
+	 * about.  Xen will handle faults like double_fault and
+	 * machine_check, so we should never see them.  Warn if
+	 * there's an unexpected IST-using fault handler.
+	 */
+	if (addr == (unsigned long)debug)
+		addr = (unsigned long)xen_debug;
+	else if (addr == (unsigned long)int3)
+		addr = (unsigned long)xen_int3;
+	else if (addr == (unsigned long)stack_segment)
+		addr = (unsigned long)xen_stack_segment;
+	else if (addr == (unsigned long)double_fault ||
+		 addr == (unsigned long)nmi) {
+		/* Don't need to handle these */
+		return 0;
+#ifdef CONFIG_X86_MCE
+	} else if (addr == (unsigned long)machine_check) {
+		return 0;
+#endif
+	} else {
+		/* Some other trap using IST? */
+		if (WARN_ON(val->ist != 0))
+			return 0;
+	}
+#endif	/* CONFIG_X86_64 */
+	info->address = addr;
+
 	info->cs = gate_segment(*val);
 	info->flags = val->dpl;
 	/* interrupt gates clear IF */
@@ -623,10 +658,26 @@ static void xen_clts(void)
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 }
 
+static DEFINE_PER_CPU(unsigned long, xen_cr0_value);
+
+static unsigned long xen_read_cr0(void)
+{
+	unsigned long cr0 = percpu_read(xen_cr0_value);
+
+	if (unlikely(cr0 == 0)) {
+		cr0 = native_read_cr0();
+		percpu_write(xen_cr0_value, cr0);
+	}
+
+	return cr0;
+}
+
 static void xen_write_cr0(unsigned long cr0)
 {
 	struct multicall_space mcs;
 
+	percpu_write(xen_cr0_value, cr0);
+
 	/* Only pay attention to cr0.TS; everything else is
 	   ignored. */
 	mcs = xen_mc_entry(0);
@@ -812,7 +863,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 
 	.clts = xen_clts,
 
-	.read_cr0 = native_read_cr0,
+	.read_cr0 = xen_read_cr0,
 	.write_cr0 = xen_write_cr0,
 
 	.read_cr4 = native_read_cr4,
@@ -860,10 +911,8 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	/* Xen takes care of %gs when switching to usermode for us */
 	.swapgs = paravirt_nop,
 
-	.lazy_mode = {
-		.enter = paravirt_enter_lazy_cpu,
-		.leave = xen_leave_lazy,
-	},
+	.start_context_switch = paravirt_start_context_switch,
+	.end_context_switch = xen_end_context_switch,
 };
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index e25a78e1113..4ceb2858165 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -42,6 +42,7 @@
 #include <linux/highmem.h>
 #include <linux/debugfs.h>
 #include <linux/bug.h>
+#include <linux/module.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
@@ -451,10 +452,6 @@ void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags)
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
 		    pte_t *ptep, pte_t pteval)
 {
-	/* updates to init_mm may be done without lock */
-	if (mm == &init_mm)
-		preempt_disable();
-
 	ADD_STATS(set_pte_at, 1);
 //	ADD_STATS(set_pte_at_pinned, xen_page_pinned(ptep));
 	ADD_STATS(set_pte_at_current, mm == current->mm);
@@ -475,9 +472,7 @@ void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
 	}
 	xen_set_pte(ptep, pteval);
 
-out:
-	if (mm == &init_mm)
-		preempt_enable();
+out:	return;
 }
 
 pte_t xen_ptep_modify_prot_start(struct mm_struct *mm,
@@ -1151,10 +1146,8 @@ static void drop_other_mm_ref(void *info)
 
 	/* If this cpu still has a stale cr3 reference, then make sure
 	   it has been flushed. */
-	if (percpu_read(xen_current_cr3) == __pa(mm->pgd)) {
+	if (percpu_read(xen_current_cr3) == __pa(mm->pgd))
 		load_cr3(swapper_pg_dir);
-		arch_flush_lazy_cpu_mode();
-	}
 }
 
 static void xen_drop_mm_ref(struct mm_struct *mm)
@@ -1167,7 +1160,6 @@ static void xen_drop_mm_ref(struct mm_struct *mm)
 			load_cr3(swapper_pg_dir);
 		else
 			leave_mm(smp_processor_id());
-		arch_flush_lazy_cpu_mode();
 	}
 
 	/* Get the "official" set of cpus referring to our pagetable. */
@@ -1875,6 +1867,14 @@ __init void xen_post_allocator_init(void)
 	xen_mark_init_mm_pinned();
 }
 
+static void xen_leave_lazy_mmu(void)
+{
+	preempt_disable();
+	xen_mc_flush();
+	paravirt_leave_lazy_mmu();
+	preempt_enable();
+}
+
 const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.pagetable_setup_start = xen_pagetable_setup_start,
 	.pagetable_setup_done = xen_pagetable_setup_done,
@@ -1948,7 +1948,7 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = {
 
 	.lazy_mode = {
 		.enter = paravirt_enter_lazy_mmu,
-		.leave = xen_leave_lazy,
+		.leave = xen_leave_lazy_mmu,
 	},
 
 	.set_fixmap = xen_set_fixmap,
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 15c6c68db6a..ad0047f47cd 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -61,9 +61,9 @@ char * __init xen_memory_setup(void)
 	 *  - xen_start_info
 	 * See comment above "struct start_info" in <xen/interface/xen.h>
 	 */
-	e820_add_region(__pa(xen_start_info->mfn_list),
-			xen_start_info->pt_base - xen_start_info->mfn_list,
-			E820_RESERVED);
+	reserve_early(__pa(xen_start_info->mfn_list),
+		      __pa(xen_start_info->pt_base),
+			"XEN START INFO");
 
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 20139464943..22494fd4c9b 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -30,7 +30,6 @@ pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
 void xen_ident_map_ISA(void);
 void xen_reserve_top(void);
 
-void xen_leave_lazy(void);
 void xen_post_allocator_init(void);
 
 char * __init xen_memory_setup(void);
@@ -62,15 +61,26 @@ void xen_setup_vcpu_info_placement(void);
 #ifdef CONFIG_SMP
 void xen_smp_init(void);
 
-void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
-void xen_uninit_lock_cpu(int cpu);
-
 extern cpumask_var_t xen_cpu_initialized_map;
 #else
 static inline void xen_smp_init(void) {}
 #endif
 
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+#else
+static inline void xen_init_spinlocks(void)
+{
+}
+static inline void xen_init_lock_cpu(int cpu)
+{
+}
+static inline void xen_uninit_lock_cpu(int cpu)
+{
+}
+#endif
 
 /* Declare an asm function, along with symbols needed to make it
    inlineable */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index fa6dc4dd3b1..ebe228d02b0 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -80,6 +80,7 @@ config XTENSA_VARIANT_S6000
 	bool "s6000 - Stretch software configurable processor"
 	select VARIANT_IRQ_SWITCH
 	select ARCH_REQUIRE_GPIOLIB
+	select XTENSA_CALIBRATE_CCOUNT
 endchoice
 
 config XTENSA_UNALIGNED_USER
@@ -137,6 +138,8 @@ config PCI
 
 source "drivers/pci/Kconfig"
 
+endmenu
+
 menu "Platform options"
 
 choice
@@ -153,8 +156,6 @@ config XTENSA_PLATFORM_ISS
 
 config XTENSA_PLATFORM_XT2000
 	bool "XT2000"
-	select XTENSA_CALIBRATE_CCOUNT
-	select PCI
 	help
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.
@@ -192,8 +193,6 @@ config CMDLINE
 
 source "mm/Kconfig"
 
-endmenu
-
 config HOTPLUG
 	bool "Support for hot-pluggable devices"
 	help
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 6e1deff4159..768bee00603 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -115,7 +115,7 @@ CONFIG_XTENSA_VARIANT_S6000=y
 CONFIG_PREEMPT=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_HIGHMEM is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
 CONFIG_SERIAL_CONSOLE=y
 # CONFIG_XTENSA_ISS_NETWORK is not set
 
@@ -131,7 +131,6 @@ CONFIG_SERIAL_CONSOLE=y
 # CONFIG_XTENSA_PLATFORM_ISS is not set
 # CONFIG_XTENSA_PLATFORM_XT2000 is not set
 CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_XTENSA_CPU_CLOCK=300
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index 67ad67bed8c..22d6dde4261 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -292,7 +292,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 #define smp_mb__before_atomic_inc()	barrier()
 #define smp_mb__after_atomic_inc()	barrier()
 
-#include <asm-generic/atomic.h>
+#include <asm-generic/atomic-long.h>
 #endif /* __KERNEL__ */
 
 #endif /* _XTENSA_ATOMIC_H */
diff --git a/arch/xtensa/include/asm/bitsperlong.h b/arch/xtensa/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..6dc0bb0c13b
--- /dev/null
+++ b/arch/xtensa/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index f84d3f00774..e4d831a3077 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -113,7 +113,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 	   are modified, we must also specify them as outputs, or gcc
 	   will assume they contain their original values. */
 		: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
-		: "1" (iph), "2" (ihl));
+		: "1" (iph), "2" (ihl)
+		: "memory");
 
 	return	csum_fold(sum);
 }
@@ -227,7 +228,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 		"1:\t"
 		: "=r" (sum), "=&r" (__dummy)
 		: "r" (saddr), "r" (daddr),
-		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "memory");
 
 	return csum_fold(sum);
 }
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index 17e0c5383b1..161bb89e98c 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -129,7 +129,7 @@ static inline __attribute_const__ int get_order(unsigned long size)
 
 #else
 
-# include <asm-generic/page.h>
+# include <asm-generic/getorder.h>
 
 #endif
 
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index b83a8181d44..053bc427210 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -39,9 +39,9 @@
 
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 extern unsigned long ccount_per_jiffy;
-extern unsigned long ccount_nsec;
+extern unsigned long nsec_per_ccount;
 #define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT  ccount_nsec
+#define NSEC_PER_CCOUNT  nsec_per_ccount
 #else
 #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
 #define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 7419dbccf02..fe3186de6a3 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -4,15 +4,30 @@
 
 extra-y := head.o vmlinux.lds
 
-
 obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
 	 setup.o signal.o syscall.o time.o traps.o vectors.o platform.o  \
 	 pci-dma.o init_task.o io.o
 
-## windowspill.o
-
 obj-$(CONFIG_KGDB) += xtensa-stub.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
 
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to  *(xxx.literal xxx.text) for the following text sections:
+#   .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g'	\
+	-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS     $@
+      cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
 
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+	$(call if_changed_dep,_cpp_lds_S)
diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c
index 3981a466c77..c1accea8cb5 100644
--- a/arch/xtensa/kernel/module.c
+++ b/arch/xtensa/kernel/module.c
@@ -34,8 +34,6 @@ void *module_alloc(unsigned long size)
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-	   table entries. */
 }
 
 int module_frob_arch_sections(Elf32_Ehdr *hdr,
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 9f0b71189e9..ba9ab934978 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -369,6 +369,18 @@ void show_regs(struct pt_regs * regs)
 		       regs->syscall);
 }
 
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+	unsigned long *sp;
+
+	if (!task || task == current)
+		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+	else
+		sp = (unsigned long *)task->thread.sp;
+
+	return sp;
+}
+
 void show_trace(struct task_struct *task, unsigned long *sp)
 {
 	unsigned long a0, a1, pc;
@@ -377,7 +389,7 @@ void show_trace(struct task_struct *task, unsigned long *sp)
 	if (sp)
 		a1 = (unsigned long)sp;
 	else
-		a1 = task->thread.sp;
+		a1 = (unsigned long)stack_pointer(task);
 
 	sp_start = a1 & ~(THREAD_SIZE-1);
 	sp_end = sp_start + THREAD_SIZE;
@@ -420,7 +432,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	unsigned long *stack;
 
 	if (!sp)
-		sp = (unsigned long *)task->thread.sp;
+		sp = stack_pointer(task);
  	stack = sp;
 
 	printk("\nStack: ");
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 5accf51053d..41c159cd872 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -87,7 +87,7 @@ SECTIONS
   {
     /* The HEAD_TEXT section must be the first section! */
     HEAD_TEXT
-    *(.literal .text)
+    TEXT_TEXT
     VMLINUX_SYMBOL(__sched_text_start) = .;
     *(.sched.literal .sched.text)
     VMLINUX_SYMBOL(__sched_text_end) = .;
@@ -139,8 +139,6 @@ SECTIONS
   __init_begin = .;
   .init.text : {
   	_sinittext = .;
-	*(.init.literal) *(.cpuinit.literal) 
-	*(.devinit.literal) *(.meminit.literal)
 	INIT_TEXT
 	_einittext = .;
   }
diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
index ae041d5027a..855ddeadc43 100644
--- a/arch/xtensa/platforms/s6105/setup.c
+++ b/arch/xtensa/platforms/s6105/setup.c
@@ -10,6 +10,8 @@
 #include <asm/bootparam.h>
 
 #include <variant/hardware.h>
+#include <variant/gpio.h>
+
 #include <platform/gpio.h>
 
 void platform_halt(void)
@@ -47,6 +49,7 @@ void __init platform_setup(char **cmdline)
 
 void __init platform_init(bp_tag_t *first)
 {
+	s6_gpio_init();
 	gpio_request(GPIO_LED1_NGREEN, "led1_green");
 	gpio_request(GPIO_LED1_RED, "led1_red");
 	gpio_direction_output(GPIO_LED1_NGREEN, 1);
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
index 03b3975468b..d83f3805130 100644
--- a/arch/xtensa/variants/s6000/Makefile
+++ b/arch/xtensa/variants/s6000/Makefile
@@ -1,3 +1,4 @@
 # s6000 Makefile
 
 obj-y		+= irq.o gpio.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT)	+= delay.o
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
new file mode 100644
index 00000000000..54b2b573f16
--- /dev/null
+++ b/arch/xtensa/variants/s6000/delay.c
@@ -0,0 +1,27 @@
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+	u32 uninitialized_var(a);
+	u32 uninitialized_var(u);
+	u32 b;
+	u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+	int i = LOOPS+1;
+	do {
+		u32 t = u;
+		asm volatile(
+		"1:	l32i %0, %2, 0 ;"
+		"	beq %0, %1, 1b ;"
+		: "=&a"(u) : "a"(t), "a"(tstamp));
+		b = xtensa_get_ccount();
+		if (i == LOOPS)
+			a = b;
+	} while (--i >= 0);
+	b -= a;
+	nsec_per_ccount = (LOOPS * 10000) / b;
+	ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 33a8d952934..79317fdcf14 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -64,8 +64,7 @@ static struct gpio_chip gpiochip = {
 	.exported = 0, /* no exporting to userspace */
 };
 
-static int gpio_init(void)
+int s6_gpio_init(void)
 {
 	return gpiochip_add(&gpiochip);
 }
-device_initcall(gpio_init);
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
new file mode 100644
index 00000000000..8327f62167e
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(void);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
diff --git a/block/Kconfig b/block/Kconfig
index e7d12782bcf..2c39527aa7d 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -26,6 +26,7 @@ if BLOCK
 config LBD
 	bool "Support for large block devices and files"
 	depends on !64BIT
+	default y
 	help
 	  Enable block devices or files of size 2TB and larger.
 
@@ -38,11 +39,13 @@ config LBD
 
 	  The ext4 filesystem requires that this feature be enabled in
 	  order to support filesystems that have the huge_file feature
-	  enabled.    Otherwise, it will refuse to mount any filesystems
-	  that use the huge_file feature, which is enabled by default
-	  by mke2fs.ext4.   The GFS2 filesystem also requires this feature.
+	  enabled.  Otherwise, it will refuse to mount in the read-write
+	  mode any filesystems that use the huge_file feature, which is
+	  enabled by default by mke2fs.ext4.
 
-	  If unsure, say N.
+	  The GFS2 filesystem also requires this feature.
+
+	  If unsure, say Y.
 
 config BLK_DEV_BSG
 	bool "Block layer SG support v4 (EXPERIMENTAL)"
diff --git a/block/as-iosched.c b/block/as-iosched.c
index c48fa670d22..7a12cf6ee1d 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -306,8 +306,8 @@ as_choose_req(struct as_data *ad, struct request *rq1, struct request *rq2)
 	data_dir = rq_is_sync(rq1);
 
 	last = ad->last_sector[data_dir];
-	s1 = rq1->sector;
-	s2 = rq2->sector;
+	s1 = blk_rq_pos(rq1);
+	s2 = blk_rq_pos(rq2);
 
 	BUG_ON(data_dir != rq_is_sync(rq2));
 
@@ -566,13 +566,15 @@ static void as_update_iohist(struct as_data *ad, struct as_io_context *aic,
 			as_update_thinktime(ad, aic, thinktime);
 
 			/* Calculate read -> read seek distance */
-			if (aic->last_request_pos < rq->sector)
-				seek_dist = rq->sector - aic->last_request_pos;
+			if (aic->last_request_pos < blk_rq_pos(rq))
+				seek_dist = blk_rq_pos(rq) -
+					    aic->last_request_pos;
 			else
-				seek_dist = aic->last_request_pos - rq->sector;
+				seek_dist = aic->last_request_pos -
+					    blk_rq_pos(rq);
 			as_update_seekdist(ad, aic, seek_dist);
 		}
-		aic->last_request_pos = rq->sector + rq->nr_sectors;
+		aic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
 		set_bit(AS_TASK_IOSTARTED, &aic->state);
 		spin_unlock(&aic->lock);
 	}
@@ -587,7 +589,7 @@ static int as_close_req(struct as_data *ad, struct as_io_context *aic,
 {
 	unsigned long delay;	/* jiffies */
 	sector_t last = ad->last_sector[ad->batch_data_dir];
-	sector_t next = rq->sector;
+	sector_t next = blk_rq_pos(rq);
 	sector_t delta; /* acceptable close offset (in sectors) */
 	sector_t s;
 
@@ -981,7 +983,7 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq)
 	 * This has to be set in order to be correctly updated by
 	 * as_find_next_rq
 	 */
-	ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
+	ad->last_sector[data_dir] = blk_rq_pos(rq) + blk_rq_sectors(rq);
 
 	if (data_dir == BLK_RW_SYNC) {
 		struct io_context *ioc = RQ_IOC(rq);
@@ -1312,12 +1314,8 @@ static void as_merged_requests(struct request_queue *q, struct request *req,
 static void as_work_handler(struct work_struct *work)
 {
 	struct as_data *ad = container_of(work, struct as_data, antic_work);
-	struct request_queue *q = ad->q;
-	unsigned long flags;
 
-	spin_lock_irqsave(q->queue_lock, flags);
-	blk_start_queueing(q);
-	spin_unlock_irqrestore(q->queue_lock, flags);
+	blk_run_queue(ad->q);
 }
 
 static int as_may_queue(struct request_queue *q, int rw)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 20b4111fa05..30022b4e2f6 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -106,10 +106,7 @@ bool blk_ordered_complete_seq(struct request_queue *q, unsigned seq, int error)
 	 */
 	q->ordseq = 0;
 	rq = q->orig_bar_rq;
-
-	if (__blk_end_request(rq, q->orderr, blk_rq_bytes(rq)))
-		BUG();
-
+	__blk_end_request_all(rq, q->orderr);
 	return true;
 }
 
@@ -166,7 +163,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
 	 * For an empty barrier, there's no actual BAR request, which
 	 * in turn makes POSTFLUSH unnecessary.  Mask them off.
 	 */
-	if (!rq->hard_nr_sectors) {
+	if (!blk_rq_sectors(rq)) {
 		q->ordered &= ~(QUEUE_ORDERED_DO_BAR |
 				QUEUE_ORDERED_DO_POSTFLUSH);
 		/*
@@ -183,7 +180,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
 	}
 
 	/* stash away the original request */
-	elv_dequeue_request(q, rq);
+	blk_dequeue_request(rq);
 	q->orig_bar_rq = rq;
 	rq = NULL;
 
@@ -221,7 +218,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp)
 	} else
 		skip |= QUEUE_ORDSEQ_PREFLUSH;
 
-	if ((q->ordered & QUEUE_ORDERED_BY_DRAIN) && q->in_flight)
+	if ((q->ordered & QUEUE_ORDERED_BY_DRAIN) && queue_in_flight(q))
 		rq = NULL;
 	else
 		skip |= QUEUE_ORDSEQ_DRAIN;
@@ -251,10 +248,8 @@ bool blk_do_ordered(struct request_queue *q, struct request **rqp)
 			 * Queue ordering not supported.  Terminate
 			 * with prejudice.
 			 */
-			elv_dequeue_request(q, rq);
-			if (__blk_end_request(rq, -EOPNOTSUPP,
-					      blk_rq_bytes(rq)))
-				BUG();
+			blk_dequeue_request(rq);
+			__blk_end_request_all(rq, -EOPNOTSUPP);
 			*rqp = NULL;
 			return false;
 		}
@@ -329,7 +324,7 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
 	/*
 	 * The driver must store the error location in ->bi_sector, if
 	 * it supports it. For non-stacked drivers, this should be copied
-	 * from rq->sector.
+	 * from blk_rq_pos(rq).
 	 */
 	if (error_sector)
 		*error_sector = bio->bi_sector;
@@ -393,10 +388,10 @@ int blkdev_issue_discard(struct block_device *bdev,
 
 		bio->bi_sector = sector;
 
-		if (nr_sects > q->max_hw_sectors) {
-			bio->bi_size = q->max_hw_sectors << 9;
-			nr_sects -= q->max_hw_sectors;
-			sector += q->max_hw_sectors;
+		if (nr_sects > queue_max_hw_sectors(q)) {
+			bio->bi_size = queue_max_hw_sectors(q) << 9;
+			nr_sects -= queue_max_hw_sectors(q);
+			sector += queue_max_hw_sectors(q);
 		} else {
 			bio->bi_size = nr_sects << 9;
 			nr_sects = 0;
diff --git a/block/blk-core.c b/block/blk-core.c
index 2998fe3a237..f6452f69250 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -28,22 +28,14 @@
 #include <linux/task_io_accounting_ops.h>
 #include <linux/blktrace_api.h>
 #include <linux/fault-inject.h>
-#include <trace/block.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/block.h>
 
 #include "blk.h"
 
-DEFINE_TRACE(block_plug);
-DEFINE_TRACE(block_unplug_io);
-DEFINE_TRACE(block_unplug_timer);
-DEFINE_TRACE(block_getrq);
-DEFINE_TRACE(block_sleeprq);
-DEFINE_TRACE(block_rq_requeue);
-DEFINE_TRACE(block_bio_backmerge);
-DEFINE_TRACE(block_bio_frontmerge);
-DEFINE_TRACE(block_bio_queue);
-DEFINE_TRACE(block_rq_complete);
-DEFINE_TRACE(block_remap);	/* Also used in drivers/md/dm.c */
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_remap);
+EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
 
 static int __make_request(struct request_queue *q, struct bio *bio);
 
@@ -68,11 +60,11 @@ static void drive_stat_acct(struct request *rq, int new_io)
 	int rw = rq_data_dir(rq);
 	int cpu;
 
-	if (!blk_fs_request(rq) || !blk_do_io_stat(rq))
+	if (!blk_do_io_stat(rq))
 		return;
 
 	cpu = part_stat_lock();
-	part = disk_map_sector_rcu(rq->rq_disk, rq->sector);
+	part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
 
 	if (!new_io)
 		part_stat_inc(cpu, part, merges[rw]);
@@ -127,13 +119,14 @@ void blk_rq_init(struct request_queue *q, struct request *rq)
 	INIT_LIST_HEAD(&rq->timeout_list);
 	rq->cpu = -1;
 	rq->q = q;
-	rq->sector = rq->hard_sector = (sector_t) -1;
+	rq->__sector = (sector_t) -1;
 	INIT_HLIST_NODE(&rq->hash);
 	RB_CLEAR_NODE(&rq->rb_node);
 	rq->cmd = rq->__cmd;
 	rq->cmd_len = BLK_MAX_CDB;
 	rq->tag = -1;
 	rq->ref_count = 1;
+	rq->start_time = jiffies;
 }
 EXPORT_SYMBOL(blk_rq_init);
 
@@ -184,14 +177,11 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
 		rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->cmd_type,
 		rq->cmd_flags);
 
-	printk(KERN_INFO "  sector %llu, nr/cnr %lu/%u\n",
-						(unsigned long long)rq->sector,
-						rq->nr_sectors,
-						rq->current_nr_sectors);
-	printk(KERN_INFO "  bio %p, biotail %p, buffer %p, data %p, len %u\n",
-						rq->bio, rq->biotail,
-						rq->buffer, rq->data,
-						rq->data_len);
+	printk(KERN_INFO "  sector %llu, nr/cnr %u/%u\n",
+	       (unsigned long long)blk_rq_pos(rq),
+	       blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
+	printk(KERN_INFO "  bio %p, biotail %p, buffer %p, len %u\n",
+	       rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
 
 	if (blk_pc_request(rq)) {
 		printk(KERN_INFO "  cdb: ");
@@ -333,24 +323,6 @@ void blk_unplug(struct request_queue *q)
 }
 EXPORT_SYMBOL(blk_unplug);
 
-static void blk_invoke_request_fn(struct request_queue *q)
-{
-	if (unlikely(blk_queue_stopped(q)))
-		return;
-
-	/*
-	 * one level of recursion is ok and is much faster than kicking
-	 * the unplug handling
-	 */
-	if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
-		q->request_fn(q);
-		queue_flag_clear(QUEUE_FLAG_REENTER, q);
-	} else {
-		queue_flag_set(QUEUE_FLAG_PLUGGED, q);
-		kblockd_schedule_work(q, &q->unplug_work);
-	}
-}
-
 /**
  * blk_start_queue - restart a previously stopped queue
  * @q:    The &struct request_queue in question
@@ -365,7 +337,7 @@ void blk_start_queue(struct request_queue *q)
 	WARN_ON(!irqs_disabled());
 
 	queue_flag_clear(QUEUE_FLAG_STOPPED, q);
-	blk_invoke_request_fn(q);
+	__blk_run_queue(q);
 }
 EXPORT_SYMBOL(blk_start_queue);
 
@@ -425,12 +397,23 @@ void __blk_run_queue(struct request_queue *q)
 {
 	blk_remove_plug(q);
 
+	if (unlikely(blk_queue_stopped(q)))
+		return;
+
+	if (elv_queue_empty(q))
+		return;
+
 	/*
 	 * Only recurse once to avoid overrunning the stack, let the unplug
 	 * handling reinvoke the handler shortly if we already got there.
 	 */
-	if (!elv_queue_empty(q))
-		blk_invoke_request_fn(q);
+	if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
+		q->request_fn(q);
+		queue_flag_clear(QUEUE_FLAG_REENTER, q);
+	} else {
+		queue_flag_set(QUEUE_FLAG_PLUGGED, q);
+		kblockd_schedule_work(q, &q->unplug_work);
+	}
 }
 EXPORT_SYMBOL(__blk_run_queue);
 
@@ -440,9 +423,7 @@ EXPORT_SYMBOL(__blk_run_queue);
  *
  * Description:
  *    Invoke request handling on this queue, if it has pending work to do.
- *    May be used to restart queueing when a request has completed. Also
- *    See @blk_start_queueing.
- *
+ *    May be used to restart queueing when a request has completed.
  */
 void blk_run_queue(struct request_queue *q)
 {
@@ -902,26 +883,59 @@ struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask)
 EXPORT_SYMBOL(blk_get_request);
 
 /**
- * blk_start_queueing - initiate dispatch of requests to device
- * @q:		request queue to kick into gear
+ * blk_make_request - given a bio, allocate a corresponding struct request.
+ * @q: target request queue
+ * @bio:  The bio describing the memory mappings that will be submitted for IO.
+ *        It may be a chained-bio properly constructed by block/bio layer.
+ * @gfp_mask: gfp flags to be used for memory allocation
  *
- * This is basically a helper to remove the need to know whether a queue
- * is plugged or not if someone just wants to initiate dispatch of requests
- * for this queue. Should be used to start queueing on a device outside
- * of ->request_fn() context. Also see @blk_run_queue.
+ * blk_make_request is the parallel of generic_make_request for BLOCK_PC
+ * type commands. Where the struct request needs to be farther initialized by
+ * the caller. It is passed a &struct bio, which describes the memory info of
+ * the I/O transfer.
  *
- * The queue lock must be held with interrupts disabled.
+ * The caller of blk_make_request must make sure that bi_io_vec
+ * are set to describe the memory buffers. That bio_data_dir() will return
+ * the needed direction of the request. (And all bio's in the passed bio-chain
+ * are properly set accordingly)
+ *
+ * If called under none-sleepable conditions, mapped bio buffers must not
+ * need bouncing, by calling the appropriate masked or flagged allocator,
+ * suitable for the target device. Otherwise the call to blk_queue_bounce will
+ * BUG.
+ *
+ * WARNING: When allocating/cloning a bio-chain, careful consideration should be
+ * given to how you allocate bios. In particular, you cannot use __GFP_WAIT for
+ * anything but the first bio in the chain. Otherwise you risk waiting for IO
+ * completion of a bio that hasn't been submitted yet, thus resulting in a
+ * deadlock. Alternatively bios should be allocated using bio_kmalloc() instead
+ * of bio_alloc(), as that avoids the mempool deadlock.
+ * If possible a big IO should be split into smaller parts when allocation
+ * fails. Partial allocation should not be an error, or you risk a live-lock.
  */
-void blk_start_queueing(struct request_queue *q)
+struct request *blk_make_request(struct request_queue *q, struct bio *bio,
+				 gfp_t gfp_mask)
 {
-	if (!blk_queue_plugged(q)) {
-		if (unlikely(blk_queue_stopped(q)))
-			return;
-		q->request_fn(q);
-	} else
-		__generic_unplug_device(q);
+	struct request *rq = blk_get_request(q, bio_data_dir(bio), gfp_mask);
+
+	if (unlikely(!rq))
+		return ERR_PTR(-ENOMEM);
+
+	for_each_bio(bio) {
+		struct bio *bounce_bio = bio;
+		int ret;
+
+		blk_queue_bounce(q, &bounce_bio);
+		ret = blk_rq_append_bio(q, rq, bounce_bio);
+		if (unlikely(ret)) {
+			blk_put_request(rq);
+			return ERR_PTR(ret);
+		}
+	}
+
+	return rq;
 }
-EXPORT_SYMBOL(blk_start_queueing);
+EXPORT_SYMBOL(blk_make_request);
 
 /**
  * blk_requeue_request - put a request back on queue
@@ -942,6 +956,8 @@ void blk_requeue_request(struct request_queue *q, struct request *rq)
 	if (blk_rq_tagged(rq))
 		blk_queue_end_tag(q, rq);
 
+	BUG_ON(blk_queued_rq(rq));
+
 	elv_requeue_request(q, rq);
 }
 EXPORT_SYMBOL(blk_requeue_request);
@@ -977,7 +993,6 @@ void blk_insert_request(struct request_queue *q, struct request *rq,
 	 * barrier
 	 */
 	rq->cmd_type = REQ_TYPE_SPECIAL;
-	rq->cmd_flags |= REQ_SOFTBARRIER;
 
 	rq->special = data;
 
@@ -991,7 +1006,7 @@ void blk_insert_request(struct request_queue *q, struct request *rq,
 
 	drive_stat_acct(rq, 1);
 	__elv_add_request(q, rq, where, 0);
-	blk_start_queueing(q);
+	__blk_run_queue(q);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 EXPORT_SYMBOL(blk_insert_request);
@@ -1113,16 +1128,13 @@ void init_request_from_bio(struct request *req, struct bio *bio)
 	if (bio_failfast_driver(bio))
 		req->cmd_flags |= REQ_FAILFAST_DRIVER;
 
-	/*
-	 * REQ_BARRIER implies no merging, but lets make it explicit
-	 */
 	if (unlikely(bio_discard(bio))) {
 		req->cmd_flags |= REQ_DISCARD;
 		if (bio_barrier(bio))
 			req->cmd_flags |= REQ_SOFTBARRIER;
 		req->q->prepare_discard_fn(req->q, req);
 	} else if (unlikely(bio_barrier(bio)))
-		req->cmd_flags |= (REQ_HARDBARRIER | REQ_NOMERGE);
+		req->cmd_flags |= REQ_HARDBARRIER;
 
 	if (bio_sync(bio))
 		req->cmd_flags |= REQ_RW_SYNC;
@@ -1132,9 +1144,8 @@ void init_request_from_bio(struct request *req, struct bio *bio)
 		req->cmd_flags |= REQ_NOIDLE;
 
 	req->errors = 0;
-	req->hard_sector = req->sector = bio->bi_sector;
+	req->__sector = bio->bi_sector;
 	req->ioprio = bio_prio(bio);
-	req->start_time = jiffies;
 	blk_rq_bio_prep(req->q, req, bio);
 }
 
@@ -1150,14 +1161,13 @@ static inline bool queue_should_plug(struct request_queue *q)
 static int __make_request(struct request_queue *q, struct bio *bio)
 {
 	struct request *req;
-	int el_ret, nr_sectors;
+	int el_ret;
+	unsigned int bytes = bio->bi_size;
 	const unsigned short prio = bio_prio(bio);
 	const int sync = bio_sync(bio);
 	const int unplug = bio_unplug(bio);
 	int rw_flags;
 
-	nr_sectors = bio_sectors(bio);
-
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1182,7 +1192,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 
 		req->biotail->bi_next = bio;
 		req->biotail = bio;
-		req->nr_sectors = req->hard_nr_sectors += nr_sectors;
+		req->__data_len += bytes;
 		req->ioprio = ioprio_best(req->ioprio, prio);
 		if (!blk_rq_cpu_valid(req))
 			req->cpu = bio->bi_comp_cpu;
@@ -1208,10 +1218,8 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 		 * not touch req->buffer either...
 		 */
 		req->buffer = bio_data(bio);
-		req->current_nr_sectors = bio_cur_sectors(bio);
-		req->hard_cur_sectors = req->current_nr_sectors;
-		req->sector = req->hard_sector = bio->bi_sector;
-		req->nr_sectors = req->hard_nr_sectors += nr_sectors;
+		req->__sector = bio->bi_sector;
+		req->__data_len += bytes;
 		req->ioprio = ioprio_best(req->ioprio, prio);
 		if (!blk_rq_cpu_valid(req))
 			req->cpu = bio->bi_comp_cpu;
@@ -1277,7 +1285,7 @@ static inline void blk_partition_remap(struct bio *bio)
 		bio->bi_bdev = bdev->bd_contains;
 
 		trace_block_remap(bdev_get_queue(bio->bi_bdev), bio,
-				    bdev->bd_dev, bio->bi_sector,
+				    bdev->bd_dev,
 				    bio->bi_sector - p->start_sect);
 	}
 }
@@ -1422,11 +1430,11 @@ static inline void __generic_make_request(struct bio *bio)
 			goto end_io;
 		}
 
-		if (unlikely(nr_sectors > q->max_hw_sectors)) {
+		if (unlikely(nr_sectors > queue_max_hw_sectors(q))) {
 			printk(KERN_ERR "bio too big device %s (%u > %u)\n",
-				bdevname(bio->bi_bdev, b),
-				bio_sectors(bio),
-				q->max_hw_sectors);
+			       bdevname(bio->bi_bdev, b),
+			       bio_sectors(bio),
+			       queue_max_hw_sectors(q));
 			goto end_io;
 		}
 
@@ -1446,8 +1454,7 @@ static inline void __generic_make_request(struct bio *bio)
 			goto end_io;
 
 		if (old_sector != -1)
-			trace_block_remap(q, bio, old_dev, bio->bi_sector,
-					    old_sector);
+			trace_block_remap(q, bio, old_dev, old_sector);
 
 		trace_block_bio_queue(q, bio);
 
@@ -1593,8 +1600,8 @@ EXPORT_SYMBOL(submit_bio);
  */
 int blk_rq_check_limits(struct request_queue *q, struct request *rq)
 {
-	if (rq->nr_sectors > q->max_sectors ||
-	    rq->data_len > q->max_hw_sectors << 9) {
+	if (blk_rq_sectors(rq) > queue_max_sectors(q) ||
+	    blk_rq_bytes(rq) > queue_max_hw_sectors(q) << 9) {
 		printk(KERN_ERR "%s: over max size limit.\n", __func__);
 		return -EIO;
 	}
@@ -1606,8 +1613,8 @@ int blk_rq_check_limits(struct request_queue *q, struct request *rq)
 	 * limitation.
 	 */
 	blk_recalc_rq_segments(rq);
-	if (rq->nr_phys_segments > q->max_phys_segments ||
-	    rq->nr_phys_segments > q->max_hw_segments) {
+	if (rq->nr_phys_segments > queue_max_phys_segments(q) ||
+	    rq->nr_phys_segments > queue_max_hw_segments(q)) {
 		printk(KERN_ERR "%s: over max segments limit.\n", __func__);
 		return -EIO;
 	}
@@ -1651,40 +1658,15 @@ int blk_insert_cloned_request(struct request_queue *q, struct request *rq)
 }
 EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
 
-/**
- * blkdev_dequeue_request - dequeue request and start timeout timer
- * @req: request to dequeue
- *
- * Dequeue @req and start timeout timer on it.  This hands off the
- * request to the driver.
- *
- * Block internal functions which don't want to start timer should
- * call elv_dequeue_request().
- */
-void blkdev_dequeue_request(struct request *req)
-{
-	elv_dequeue_request(req->q, req);
-
-	/*
-	 * We are now handing the request to the hardware, add the
-	 * timeout handler.
-	 */
-	blk_add_timer(req);
-}
-EXPORT_SYMBOL(blkdev_dequeue_request);
-
 static void blk_account_io_completion(struct request *req, unsigned int bytes)
 {
-	if (!blk_do_io_stat(req))
-		return;
-
-	if (blk_fs_request(req)) {
+	if (blk_do_io_stat(req)) {
 		const int rw = rq_data_dir(req);
 		struct hd_struct *part;
 		int cpu;
 
 		cpu = part_stat_lock();
-		part = disk_map_sector_rcu(req->rq_disk, req->sector);
+		part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
 		part_stat_add(cpu, part, sectors[rw], bytes >> 9);
 		part_stat_unlock();
 	}
@@ -1692,22 +1674,19 @@ static void blk_account_io_completion(struct request *req, unsigned int bytes)
 
 static void blk_account_io_done(struct request *req)
 {
-	if (!blk_do_io_stat(req))
-		return;
-
 	/*
 	 * Account IO completion.  bar_rq isn't accounted as a normal
 	 * IO on queueing nor completion.  Accounting the containing
 	 * request is enough.
 	 */
-	if (blk_fs_request(req) && req != &req->q->bar_rq) {
+	if (blk_do_io_stat(req) && req != &req->q->bar_rq) {
 		unsigned long duration = jiffies - req->start_time;
 		const int rw = rq_data_dir(req);
 		struct hd_struct *part;
 		int cpu;
 
 		cpu = part_stat_lock();
-		part = disk_map_sector_rcu(req->rq_disk, req->sector);
+		part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
 
 		part_stat_inc(cpu, part, ios[rw]);
 		part_stat_add(cpu, part, ticks[rw], duration);
@@ -1719,38 +1698,226 @@ static void blk_account_io_done(struct request *req)
 }
 
 /**
- * __end_that_request_first - end I/O on a request
+ * blk_peek_request - peek at the top of a request queue
+ * @q: request queue to peek at
+ *
+ * Description:
+ *     Return the request at the top of @q.  The returned request
+ *     should be started using blk_start_request() before LLD starts
+ *     processing it.
+ *
+ * Return:
+ *     Pointer to the request at the top of @q if available.  Null
+ *     otherwise.
+ *
+ * Context:
+ *     queue_lock must be held.
+ */
+struct request *blk_peek_request(struct request_queue *q)
+{
+	struct request *rq;
+	int ret;
+
+	while ((rq = __elv_next_request(q)) != NULL) {
+		if (!(rq->cmd_flags & REQ_STARTED)) {
+			/*
+			 * This is the first time the device driver
+			 * sees this request (possibly after
+			 * requeueing).  Notify IO scheduler.
+			 */
+			if (blk_sorted_rq(rq))
+				elv_activate_rq(q, rq);
+
+			/*
+			 * just mark as started even if we don't start
+			 * it, a request that has been delayed should
+			 * not be passed by new incoming requests
+			 */
+			rq->cmd_flags |= REQ_STARTED;
+			trace_block_rq_issue(q, rq);
+		}
+
+		if (!q->boundary_rq || q->boundary_rq == rq) {
+			q->end_sector = rq_end_sector(rq);
+			q->boundary_rq = NULL;
+		}
+
+		if (rq->cmd_flags & REQ_DONTPREP)
+			break;
+
+		if (q->dma_drain_size && blk_rq_bytes(rq)) {
+			/*
+			 * make sure space for the drain appears we
+			 * know we can do this because max_hw_segments
+			 * has been adjusted to be one fewer than the
+			 * device can handle
+			 */
+			rq->nr_phys_segments++;
+		}
+
+		if (!q->prep_rq_fn)
+			break;
+
+		ret = q->prep_rq_fn(q, rq);
+		if (ret == BLKPREP_OK) {
+			break;
+		} else if (ret == BLKPREP_DEFER) {
+			/*
+			 * the request may have been (partially) prepped.
+			 * we need to keep this request in the front to
+			 * avoid resource deadlock.  REQ_STARTED will
+			 * prevent other fs requests from passing this one.
+			 */
+			if (q->dma_drain_size && blk_rq_bytes(rq) &&
+			    !(rq->cmd_flags & REQ_DONTPREP)) {
+				/*
+				 * remove the space for the drain we added
+				 * so that we don't add it again
+				 */
+				--rq->nr_phys_segments;
+			}
+
+			rq = NULL;
+			break;
+		} else if (ret == BLKPREP_KILL) {
+			rq->cmd_flags |= REQ_QUIET;
+			/*
+			 * Mark this request as started so we don't trigger
+			 * any debug logic in the end I/O path.
+			 */
+			blk_start_request(rq);
+			__blk_end_request_all(rq, -EIO);
+		} else {
+			printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
+			break;
+		}
+	}
+
+	return rq;
+}
+EXPORT_SYMBOL(blk_peek_request);
+
+void blk_dequeue_request(struct request *rq)
+{
+	struct request_queue *q = rq->q;
+
+	BUG_ON(list_empty(&rq->queuelist));
+	BUG_ON(ELV_ON_HASH(rq));
+
+	list_del_init(&rq->queuelist);
+
+	/*
+	 * the time frame between a request being removed from the lists
+	 * and to it is freed is accounted as io that is in progress at
+	 * the driver side.
+	 */
+	if (blk_account_rq(rq))
+		q->in_flight[rq_is_sync(rq)]++;
+}
+
+/**
+ * blk_start_request - start request processing on the driver
+ * @req: request to dequeue
+ *
+ * Description:
+ *     Dequeue @req and start timeout timer on it.  This hands off the
+ *     request to the driver.
+ *
+ *     Block internal functions which don't want to start timer should
+ *     call blk_dequeue_request().
+ *
+ * Context:
+ *     queue_lock must be held.
+ */
+void blk_start_request(struct request *req)
+{
+	blk_dequeue_request(req);
+
+	/*
+	 * We are now handing the request to the hardware, initialize
+	 * resid_len to full count and add the timeout handler.
+	 */
+	req->resid_len = blk_rq_bytes(req);
+	if (unlikely(blk_bidi_rq(req)))
+		req->next_rq->resid_len = blk_rq_bytes(req->next_rq);
+
+	blk_add_timer(req);
+}
+EXPORT_SYMBOL(blk_start_request);
+
+/**
+ * blk_fetch_request - fetch a request from a request queue
+ * @q: request queue to fetch a request from
+ *
+ * Description:
+ *     Return the request at the top of @q.  The request is started on
+ *     return and LLD can start processing it immediately.
+ *
+ * Return:
+ *     Pointer to the request at the top of @q if available.  Null
+ *     otherwise.
+ *
+ * Context:
+ *     queue_lock must be held.
+ */
+struct request *blk_fetch_request(struct request_queue *q)
+{
+	struct request *rq;
+
+	rq = blk_peek_request(q);
+	if (rq)
+		blk_start_request(rq);
+	return rq;
+}
+EXPORT_SYMBOL(blk_fetch_request);
+
+/**
+ * blk_update_request - Special helper function for request stacking drivers
  * @req:      the request being processed
  * @error:    %0 for success, < %0 for error
- * @nr_bytes: number of bytes to complete
+ * @nr_bytes: number of bytes to complete @req
  *
  * Description:
- *     Ends I/O on a number of bytes attached to @req, and sets it up
- *     for the next range of segments (if any) in the cluster.
+ *     Ends I/O on a number of bytes attached to @req, but doesn't complete
+ *     the request structure even if @req doesn't have leftover.
+ *     If @req has leftover, sets it up for the next range of segments.
+ *
+ *     This special helper function is only for request stacking drivers
+ *     (e.g. request-based dm) so that they can handle partial completion.
+ *     Actual device drivers should use blk_end_request instead.
+ *
+ *     Passing the result of blk_rq_bytes() as @nr_bytes guarantees
+ *     %false return from this function.
  *
  * Return:
- *     %0 - we are done with this request, call end_that_request_last()
- *     %1 - still buffers pending for this request
+ *     %false - this request doesn't have any more data
+ *     %true  - this request has more data
  **/
-static int __end_that_request_first(struct request *req, int error,
-				    int nr_bytes)
+bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
 {
 	int total_bytes, bio_nbytes, next_idx = 0;
 	struct bio *bio;
 
+	if (!req->bio)
+		return false;
+
 	trace_block_rq_complete(req->q, req);
 
 	/*
-	 * for a REQ_TYPE_BLOCK_PC request, we want to carry any eventual
-	 * sense key with us all the way through
+	 * For fs requests, rq is just carrier of independent bio's
+	 * and each partial completion should be handled separately.
+	 * Reset per-request error on each partial completion.
+	 *
+	 * TODO: tj: This is too subtle.  It would be better to let
+	 * low level drivers do what they see fit.
 	 */
-	if (!blk_pc_request(req))
+	if (blk_fs_request(req))
 		req->errors = 0;
 
 	if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) {
 		printk(KERN_ERR "end_request: I/O error, dev %s, sector %llu\n",
 				req->rq_disk ? req->rq_disk->disk_name : "?",
-				(unsigned long long)req->sector);
+				(unsigned long long)blk_rq_pos(req));
 	}
 
 	blk_account_io_completion(req, nr_bytes);
@@ -1768,10 +1935,10 @@ static int __end_that_request_first(struct request *req, int error,
 		} else {
 			int idx = bio->bi_idx + next_idx;
 
-			if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
+			if (unlikely(idx >= bio->bi_vcnt)) {
 				blk_dump_rq_flags(req, "__end_that");
 				printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
-				       __func__, bio->bi_idx, bio->bi_vcnt);
+				       __func__, idx, bio->bi_vcnt);
 				break;
 			}
 
@@ -1810,8 +1977,15 @@ static int __end_that_request_first(struct request *req, int error,
 	/*
 	 * completely done
 	 */
-	if (!req->bio)
-		return 0;
+	if (!req->bio) {
+		/*
+		 * Reset counters so that the request stacking driver
+		 * can find how many bytes remain in the request
+		 * later.
+		 */
+		req->__data_len = 0;
+		return false;
+	}
 
 	/*
 	 * if the request wasn't completed, update state
@@ -1823,21 +1997,55 @@ static int __end_that_request_first(struct request *req, int error,
 		bio_iovec(bio)->bv_len -= nr_bytes;
 	}
 
-	blk_recalc_rq_sectors(req, total_bytes >> 9);
+	req->__data_len -= total_bytes;
+	req->buffer = bio_data(req->bio);
+
+	/* update sector only for requests with clear definition of sector */
+	if (blk_fs_request(req) || blk_discard_rq(req))
+		req->__sector += total_bytes >> 9;
+
+	/*
+	 * If total number of sectors is less than the first segment
+	 * size, something has gone terribly wrong.
+	 */
+	if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
+		printk(KERN_ERR "blk: request botched\n");
+		req->__data_len = blk_rq_cur_bytes(req);
+	}
+
+	/* recalculate the number of segments */
 	blk_recalc_rq_segments(req);
-	return 1;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(blk_update_request);
+
+static bool blk_update_bidi_request(struct request *rq, int error,
+				    unsigned int nr_bytes,
+				    unsigned int bidi_bytes)
+{
+	if (blk_update_request(rq, error, nr_bytes))
+		return true;
+
+	/* Bidi request must be completed as a whole */
+	if (unlikely(blk_bidi_rq(rq)) &&
+	    blk_update_request(rq->next_rq, error, bidi_bytes))
+		return true;
+
+	add_disk_randomness(rq->rq_disk);
+
+	return false;
 }
 
 /*
  * queue lock must be held
  */
-static void end_that_request_last(struct request *req, int error)
+static void blk_finish_request(struct request *req, int error)
 {
 	if (blk_rq_tagged(req))
 		blk_queue_end_tag(req->q, req);
 
-	if (blk_queued_rq(req))
-		elv_dequeue_request(req->q, req);
+	BUG_ON(blk_queued_rq(req));
 
 	if (unlikely(laptop_mode) && blk_fs_request(req))
 		laptop_io_completion();
@@ -1857,117 +2065,62 @@ static void end_that_request_last(struct request *req, int error)
 }
 
 /**
- * blk_rq_bytes - Returns bytes left to complete in the entire request
- * @rq: the request being processed
- **/
-unsigned int blk_rq_bytes(struct request *rq)
-{
-	if (blk_fs_request(rq))
-		return rq->hard_nr_sectors << 9;
-
-	return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_bytes);
-
-/**
- * blk_rq_cur_bytes - Returns bytes left to complete in the current segment
- * @rq: the request being processed
- **/
-unsigned int blk_rq_cur_bytes(struct request *rq)
-{
-	if (blk_fs_request(rq))
-		return rq->current_nr_sectors << 9;
-
-	if (rq->bio)
-		return rq->bio->bi_size;
-
-	return rq->data_len;
-}
-EXPORT_SYMBOL_GPL(blk_rq_cur_bytes);
-
-/**
- * end_request - end I/O on the current segment of the request
- * @req:	the request being processed
- * @uptodate:	error value or %0/%1 uptodate flag
+ * blk_end_bidi_request - Complete a bidi request
+ * @rq:         the request to complete
+ * @error:      %0 for success, < %0 for error
+ * @nr_bytes:   number of bytes to complete @rq
+ * @bidi_bytes: number of bytes to complete @rq->next_rq
  *
  * Description:
- *     Ends I/O on the current segment of a request. If that is the only
- *     remaining segment, the request is also completed and freed.
- *
- *     This is a remnant of how older block drivers handled I/O completions.
- *     Modern drivers typically end I/O on the full request in one go, unless
- *     they have a residual value to account for. For that case this function
- *     isn't really useful, unless the residual just happens to be the
- *     full current segment. In other words, don't use this function in new
- *     code. Use blk_end_request() or __blk_end_request() to end a request.
+ *     Ends I/O on a number of bytes attached to @rq and @rq->next_rq.
+ *     Drivers that supports bidi can safely call this member for any
+ *     type of request, bidi or uni.  In the later case @bidi_bytes is
+ *     just ignored.
+ *
+ * Return:
+ *     %false - we are done with this request
+ *     %true  - still buffers pending for this request
  **/
-void end_request(struct request *req, int uptodate)
-{
-	int error = 0;
-
-	if (uptodate <= 0)
-		error = uptodate ? uptodate : -EIO;
-
-	__blk_end_request(req, error, req->hard_cur_sectors << 9);
-}
-EXPORT_SYMBOL(end_request);
-
-static int end_that_request_data(struct request *rq, int error,
+static bool blk_end_bidi_request(struct request *rq, int error,
 				 unsigned int nr_bytes, unsigned int bidi_bytes)
 {
-	if (rq->bio) {
-		if (__end_that_request_first(rq, error, nr_bytes))
-			return 1;
+	struct request_queue *q = rq->q;
+	unsigned long flags;
 
-		/* Bidi request must be completed as a whole */
-		if (blk_bidi_rq(rq) &&
-		    __end_that_request_first(rq->next_rq, error, bidi_bytes))
-			return 1;
-	}
+	if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
+		return true;
 
-	return 0;
+	spin_lock_irqsave(q->queue_lock, flags);
+	blk_finish_request(rq, error);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	return false;
 }
 
 /**
- * blk_end_io - Generic end_io function to complete a request.
- * @rq:           the request being processed
- * @error:        %0 for success, < %0 for error
- * @nr_bytes:     number of bytes to complete @rq
- * @bidi_bytes:   number of bytes to complete @rq->next_rq
- * @drv_callback: function called between completion of bios in the request
- *                and completion of the request.
- *                If the callback returns non %0, this helper returns without
- *                completion of the request.
+ * __blk_end_bidi_request - Complete a bidi request with queue lock held
+ * @rq:         the request to complete
+ * @error:      %0 for success, < %0 for error
+ * @nr_bytes:   number of bytes to complete @rq
+ * @bidi_bytes: number of bytes to complete @rq->next_rq
  *
  * Description:
- *     Ends I/O on a number of bytes attached to @rq and @rq->next_rq.
- *     If @rq has leftover, sets it up for the next range of segments.
+ *     Identical to blk_end_bidi_request() except that queue lock is
+ *     assumed to be locked on entry and remains so on return.
  *
  * Return:
- *     %0 - we are done with this request
- *     %1 - this request is not freed yet, it still has pending buffers.
+ *     %false - we are done with this request
+ *     %true  - still buffers pending for this request
  **/
-static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes,
-		      unsigned int bidi_bytes,
-		      int (drv_callback)(struct request *))
+static bool __blk_end_bidi_request(struct request *rq, int error,
+				   unsigned int nr_bytes, unsigned int bidi_bytes)
 {
-	struct request_queue *q = rq->q;
-	unsigned long flags = 0UL;
-
-	if (end_that_request_data(rq, error, nr_bytes, bidi_bytes))
-		return 1;
-
-	/* Special feature for tricky drivers */
-	if (drv_callback && drv_callback(rq))
-		return 1;
+	if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
+		return true;
 
-	add_disk_randomness(rq->rq_disk);
+	blk_finish_request(rq, error);
 
-	spin_lock_irqsave(q->queue_lock, flags);
-	end_that_request_last(rq, error);
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
-	return 0;
+	return false;
 }
 
 /**
@@ -1981,124 +2134,112 @@ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes,
  *     If @rq has leftover, sets it up for the next range of segments.
  *
  * Return:
- *     %0 - we are done with this request
- *     %1 - still buffers pending for this request
+ *     %false - we are done with this request
+ *     %true  - still buffers pending for this request
  **/
-int blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
+bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
-	return blk_end_io(rq, error, nr_bytes, 0, NULL);
+	return blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
 EXPORT_SYMBOL_GPL(blk_end_request);
 
 /**
- * __blk_end_request - Helper function for drivers to complete the request.
- * @rq:       the request being processed
- * @error:    %0 for success, < %0 for error
- * @nr_bytes: number of bytes to complete
+ * blk_end_request_all - Helper function for drives to finish the request.
+ * @rq: the request to finish
+ * @error: %0 for success, < %0 for error
  *
  * Description:
- *     Must be called with queue lock held unlike blk_end_request().
- *
- * Return:
- *     %0 - we are done with this request
- *     %1 - still buffers pending for this request
- **/
-int __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
+ *     Completely finish @rq.
+ */
+void blk_end_request_all(struct request *rq, int error)
 {
-	if (rq->bio && __end_that_request_first(rq, error, nr_bytes))
-		return 1;
+	bool pending;
+	unsigned int bidi_bytes = 0;
 
-	add_disk_randomness(rq->rq_disk);
+	if (unlikely(blk_bidi_rq(rq)))
+		bidi_bytes = blk_rq_bytes(rq->next_rq);
 
-	end_that_request_last(rq, error);
+	pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
+	BUG_ON(pending);
+}
+EXPORT_SYMBOL_GPL(blk_end_request_all);
 
-	return 0;
+/**
+ * blk_end_request_cur - Helper function to finish the current request chunk.
+ * @rq: the request to finish the current chunk for
+ * @error: %0 for success, < %0 for error
+ *
+ * Description:
+ *     Complete the current consecutively mapped chunk from @rq.
+ *
+ * Return:
+ *     %false - we are done with this request
+ *     %true  - still buffers pending for this request
+ */
+bool blk_end_request_cur(struct request *rq, int error)
+{
+	return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(__blk_end_request);
+EXPORT_SYMBOL_GPL(blk_end_request_cur);
 
 /**
- * blk_end_bidi_request - Helper function for drivers to complete bidi request.
- * @rq:         the bidi request being processed
- * @error:      %0 for success, < %0 for error
- * @nr_bytes:   number of bytes to complete @rq
- * @bidi_bytes: number of bytes to complete @rq->next_rq
+ * __blk_end_request - Helper function for drivers to complete the request.
+ * @rq:       the request being processed
+ * @error:    %0 for success, < %0 for error
+ * @nr_bytes: number of bytes to complete
  *
  * Description:
- *     Ends I/O on a number of bytes attached to @rq and @rq->next_rq.
+ *     Must be called with queue lock held unlike blk_end_request().
  *
  * Return:
- *     %0 - we are done with this request
- *     %1 - still buffers pending for this request
+ *     %false - we are done with this request
+ *     %true  - still buffers pending for this request
  **/
-int blk_end_bidi_request(struct request *rq, int error, unsigned int nr_bytes,
-			 unsigned int bidi_bytes)
+bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
-	return blk_end_io(rq, error, nr_bytes, bidi_bytes, NULL);
+	return __blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(blk_end_bidi_request);
+EXPORT_SYMBOL_GPL(__blk_end_request);
 
 /**
- * blk_update_request - Special helper function for request stacking drivers
- * @rq:           the request being processed
- * @error:        %0 for success, < %0 for error
- * @nr_bytes:     number of bytes to complete @rq
+ * __blk_end_request_all - Helper function for drives to finish the request.
+ * @rq: the request to finish
+ * @error: %0 for success, < %0 for error
  *
  * Description:
- *     Ends I/O on a number of bytes attached to @rq, but doesn't complete
- *     the request structure even if @rq doesn't have leftover.
- *     If @rq has leftover, sets it up for the next range of segments.
- *
- *     This special helper function is only for request stacking drivers
- *     (e.g. request-based dm) so that they can handle partial completion.
- *     Actual device drivers should use blk_end_request instead.
+ *     Completely finish @rq.  Must be called with queue lock held.
  */
-void blk_update_request(struct request *rq, int error, unsigned int nr_bytes)
+void __blk_end_request_all(struct request *rq, int error)
 {
-	if (!end_that_request_data(rq, error, nr_bytes, 0)) {
-		/*
-		 * These members are not updated in end_that_request_data()
-		 * when all bios are completed.
-		 * Update them so that the request stacking driver can find
-		 * how many bytes remain in the request later.
-		 */
-		rq->nr_sectors = rq->hard_nr_sectors = 0;
-		rq->current_nr_sectors = rq->hard_cur_sectors = 0;
-	}
+	bool pending;
+	unsigned int bidi_bytes = 0;
+
+	if (unlikely(blk_bidi_rq(rq)))
+		bidi_bytes = blk_rq_bytes(rq->next_rq);
+
+	pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
+	BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(blk_update_request);
+EXPORT_SYMBOL_GPL(__blk_end_request_all);
 
 /**
- * blk_end_request_callback - Special helper function for tricky drivers
- * @rq:           the request being processed
- * @error:        %0 for success, < %0 for error
- * @nr_bytes:     number of bytes to complete
- * @drv_callback: function called between completion of bios in the request
- *                and completion of the request.
- *                If the callback returns non %0, this helper returns without
- *                completion of the request.
+ * __blk_end_request_cur - Helper function to finish the current request chunk.
+ * @rq: the request to finish the current chunk for
+ * @error: %0 for success, < %0 for error
  *
  * Description:
- *     Ends I/O on a number of bytes attached to @rq.
- *     If @rq has leftover, sets it up for the next range of segments.
- *
- *     This special helper function is used only for existing tricky drivers.
- *     (e.g. cdrom_newpc_intr() of ide-cd)
- *     This interface will be removed when such drivers are rewritten.
- *     Don't use this interface in other places anymore.
+ *     Complete the current consecutively mapped chunk from @rq.  Must
+ *     be called with queue lock held.
  *
  * Return:
- *     %0 - we are done with this request
- *     %1 - this request is not freed yet.
- *          this request still has pending buffers or
- *          the driver doesn't want to finish this request yet.
- **/
-int blk_end_request_callback(struct request *rq, int error,
-			     unsigned int nr_bytes,
-			     int (drv_callback)(struct request *))
+ *     %false - we are done with this request
+ *     %true  - still buffers pending for this request
+ */
+bool __blk_end_request_cur(struct request *rq, int error)
 {
-	return blk_end_io(rq, error, nr_bytes, 0, drv_callback);
+	return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(blk_end_request_callback);
+EXPORT_SYMBOL_GPL(__blk_end_request_cur);
 
 void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 		     struct bio *bio)
@@ -2111,11 +2252,7 @@ void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 		rq->nr_phys_segments = bio_phys_segments(q, bio);
 		rq->buffer = bio_data(bio);
 	}
-	rq->current_nr_sectors = bio_cur_sectors(bio);
-	rq->hard_cur_sectors = rq->current_nr_sectors;
-	rq->hard_nr_sectors = rq->nr_sectors = bio_sectors(bio);
-	rq->data_len = bio->bi_size;
-
+	rq->__data_len = bio->bi_size;
 	rq->bio = rq->biotail = bio;
 
 	if (bio->bi_bdev)
@@ -2150,6 +2287,106 @@ int blk_lld_busy(struct request_queue *q)
 }
 EXPORT_SYMBOL_GPL(blk_lld_busy);
 
+/**
+ * blk_rq_unprep_clone - Helper function to free all bios in a cloned request
+ * @rq: the clone request to be cleaned up
+ *
+ * Description:
+ *     Free all bios in @rq for a cloned request.
+ */
+void blk_rq_unprep_clone(struct request *rq)
+{
+	struct bio *bio;
+
+	while ((bio = rq->bio) != NULL) {
+		rq->bio = bio->bi_next;
+
+		bio_put(bio);
+	}
+}
+EXPORT_SYMBOL_GPL(blk_rq_unprep_clone);
+
+/*
+ * Copy attributes of the original request to the clone request.
+ * The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not copied.
+ */
+static void __blk_rq_prep_clone(struct request *dst, struct request *src)
+{
+	dst->cpu = src->cpu;
+	dst->cmd_flags = (rq_data_dir(src) | REQ_NOMERGE);
+	dst->cmd_type = src->cmd_type;
+	dst->__sector = blk_rq_pos(src);
+	dst->__data_len = blk_rq_bytes(src);
+	dst->nr_phys_segments = src->nr_phys_segments;
+	dst->ioprio = src->ioprio;
+	dst->extra_len = src->extra_len;
+}
+
+/**
+ * blk_rq_prep_clone - Helper function to setup clone request
+ * @rq: the request to be setup
+ * @rq_src: original request to be cloned
+ * @bs: bio_set that bios for clone are allocated from
+ * @gfp_mask: memory allocation mask for bio
+ * @bio_ctr: setup function to be called for each clone bio.
+ *           Returns %0 for success, non %0 for failure.
+ * @data: private data to be passed to @bio_ctr
+ *
+ * Description:
+ *     Clones bios in @rq_src to @rq, and copies attributes of @rq_src to @rq.
+ *     The actual data parts of @rq_src (e.g. ->cmd, ->buffer, ->sense)
+ *     are not copied, and copying such parts is the caller's responsibility.
+ *     Also, pages which the original bios are pointing to are not copied
+ *     and the cloned bios just point same pages.
+ *     So cloned bios must be completed before original bios, which means
+ *     the caller must complete @rq before @rq_src.
+ */
+int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
+		      struct bio_set *bs, gfp_t gfp_mask,
+		      int (*bio_ctr)(struct bio *, struct bio *, void *),
+		      void *data)
+{
+	struct bio *bio, *bio_src;
+
+	if (!bs)
+		bs = fs_bio_set;
+
+	blk_rq_init(NULL, rq);
+
+	__rq_for_each_bio(bio_src, rq_src) {
+		bio = bio_alloc_bioset(gfp_mask, bio_src->bi_max_vecs, bs);
+		if (!bio)
+			goto free_and_out;
+
+		__bio_clone(bio, bio_src);
+
+		if (bio_integrity(bio_src) &&
+		    bio_integrity_clone(bio, bio_src, gfp_mask))
+			goto free_and_out;
+
+		if (bio_ctr && bio_ctr(bio, bio_src, data))
+			goto free_and_out;
+
+		if (rq->bio) {
+			rq->biotail->bi_next = bio;
+			rq->biotail = bio;
+		} else
+			rq->bio = rq->biotail = bio;
+	}
+
+	__blk_rq_prep_clone(rq, rq_src);
+
+	return 0;
+
+free_and_out:
+	if (bio)
+		bio_free(bio, bs);
+	blk_rq_unprep_clone(rq);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(blk_rq_prep_clone);
+
 int kblockd_schedule_work(struct request_queue *q, struct work_struct *work)
 {
 	return queue_work(kblockd_workqueue, work);
@@ -2158,6 +2395,9 @@ EXPORT_SYMBOL(kblockd_schedule_work);
 
 int __init blk_dev_init(void)
 {
+	BUILD_BUG_ON(__REQ_NR_BITS > 8 *
+			sizeof(((struct request *)0)->cmd_flags));
+
 	kblockd_workqueue = create_workqueue("kblockd");
 	if (!kblockd_workqueue)
 		panic("Failed to create kblockd\n");
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 6af716d1e54..49557e91f0d 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -51,7 +51,6 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 	int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
 
 	rq->rq_disk = bd_disk;
-	rq->cmd_flags |= REQ_NOMERGE;
 	rq->end_io = done;
 	WARN_ON(irqs_disabled());
 	spin_lock_irq(q->queue_lock);
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 91fa8e06b6a..73e28d35568 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -340,7 +340,7 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 		kobject_uevent(&bi->kobj, KOBJ_ADD);
 
 		bi->flags |= INTEGRITY_FLAG_READ | INTEGRITY_FLAG_WRITE;
-		bi->sector_size = disk->queue->hardsect_size;
+		bi->sector_size = queue_logical_block_size(disk->queue);
 		disk->integrity = bi;
 	} else
 		bi = disk->integrity;
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index 012f065ac8e..d4ed6000147 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -35,9 +35,9 @@ int put_io_context(struct io_context *ioc)
 	if (ioc == NULL)
 		return 1;
 
-	BUG_ON(atomic_read(&ioc->refcount) == 0);
+	BUG_ON(atomic_long_read(&ioc->refcount) == 0);
 
-	if (atomic_dec_and_test(&ioc->refcount)) {
+	if (atomic_long_dec_and_test(&ioc->refcount)) {
 		rcu_read_lock();
 		if (ioc->aic && ioc->aic->dtor)
 			ioc->aic->dtor(ioc->aic);
@@ -90,7 +90,7 @@ struct io_context *alloc_io_context(gfp_t gfp_flags, int node)
 
 	ret = kmem_cache_alloc_node(iocontext_cachep, gfp_flags, node);
 	if (ret) {
-		atomic_set(&ret->refcount, 1);
+		atomic_long_set(&ret->refcount, 1);
 		atomic_set(&ret->nr_tasks, 1);
 		spin_lock_init(&ret->lock);
 		ret->ioprio_changed = 0;
@@ -151,7 +151,7 @@ struct io_context *get_io_context(gfp_t gfp_flags, int node)
 		ret = current_io_context(gfp_flags, node);
 		if (unlikely(!ret))
 			break;
-	} while (!atomic_inc_not_zero(&ret->refcount));
+	} while (!atomic_long_inc_not_zero(&ret->refcount));
 
 	return ret;
 }
@@ -163,8 +163,8 @@ void copy_io_context(struct io_context **pdst, struct io_context **psrc)
 	struct io_context *dst = *pdst;
 
 	if (src) {
-		BUG_ON(atomic_read(&src->refcount) == 0);
-		atomic_inc(&src->refcount);
+		BUG_ON(atomic_long_read(&src->refcount) == 0);
+		atomic_long_inc(&src->refcount);
 		put_io_context(dst);
 		*pdst = src;
 	}
diff --git a/block/blk-map.c b/block/blk-map.c
index f103729b462..9083cf0180c 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -20,11 +20,10 @@ int blk_rq_append_bio(struct request_queue *q, struct request *rq,
 		rq->biotail->bi_next = bio;
 		rq->biotail = bio;
 
-		rq->data_len += bio->bi_size;
+		rq->__data_len += bio->bi_size;
 	}
 	return 0;
 }
-EXPORT_SYMBOL(blk_rq_append_bio);
 
 static int __blk_rq_unmap_user(struct bio *bio)
 {
@@ -116,7 +115,7 @@ int blk_rq_map_user(struct request_queue *q, struct request *rq,
 	struct bio *bio = NULL;
 	int ret;
 
-	if (len > (q->max_hw_sectors << 9))
+	if (len > (queue_max_hw_sectors(q) << 9))
 		return -EINVAL;
 	if (!len)
 		return -EINVAL;
@@ -156,7 +155,7 @@ int blk_rq_map_user(struct request_queue *q, struct request *rq,
 	if (!bio_flagged(bio, BIO_USER_MAPPED))
 		rq->cmd_flags |= REQ_COPY_USER;
 
-	rq->buffer = rq->data = NULL;
+	rq->buffer = NULL;
 	return 0;
 unmap_rq:
 	blk_rq_unmap_user(bio);
@@ -235,7 +234,7 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 	blk_queue_bounce(q, &bio);
 	bio_get(bio);
 	blk_rq_bio_prep(q, rq, bio);
-	rq->buffer = rq->data = NULL;
+	rq->buffer = NULL;
 	return 0;
 }
 EXPORT_SYMBOL(blk_rq_map_user_iov);
@@ -282,7 +281,8 @@ EXPORT_SYMBOL(blk_rq_unmap_user);
  *
  * Description:
  *    Data will be mapped directly if possible. Otherwise a bounce
- *    buffer is used.
+ *    buffer is used. Can be called multple times to append multple
+ *    buffers.
  */
 int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 		    unsigned int len, gfp_t gfp_mask)
@@ -290,8 +290,9 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 	int reading = rq_data_dir(rq) == READ;
 	int do_copy = 0;
 	struct bio *bio;
+	int ret;
 
-	if (len > (q->max_hw_sectors << 9))
+	if (len > (queue_max_hw_sectors(q) << 9))
 		return -EINVAL;
 	if (!len || !kbuf)
 		return -EINVAL;
@@ -311,9 +312,15 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 	if (do_copy)
 		rq->cmd_flags |= REQ_COPY_USER;
 
-	blk_rq_bio_prep(q, rq, bio);
+	ret = blk_rq_append_bio(q, rq, bio);
+	if (unlikely(ret)) {
+		/* request is too big */
+		bio_put(bio);
+		return ret;
+	}
+
 	blk_queue_bounce(q, &rq->bio);
-	rq->buffer = rq->data = NULL;
+	rq->buffer = NULL;
 	return 0;
 }
 EXPORT_SYMBOL(blk_rq_map_kern);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 23d2a6fe34a..39ce64432ba 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -9,35 +9,6 @@
 
 #include "blk.h"
 
-void blk_recalc_rq_sectors(struct request *rq, int nsect)
-{
-	if (blk_fs_request(rq) || blk_discard_rq(rq)) {
-		rq->hard_sector += nsect;
-		rq->hard_nr_sectors -= nsect;
-
-		/*
-		 * Move the I/O submission pointers ahead if required.
-		 */
-		if ((rq->nr_sectors >= rq->hard_nr_sectors) &&
-		    (rq->sector <= rq->hard_sector)) {
-			rq->sector = rq->hard_sector;
-			rq->nr_sectors = rq->hard_nr_sectors;
-			rq->hard_cur_sectors = bio_cur_sectors(rq->bio);
-			rq->current_nr_sectors = rq->hard_cur_sectors;
-			rq->buffer = bio_data(rq->bio);
-		}
-
-		/*
-		 * if total number of sectors is less than the first segment
-		 * size, something has gone terribly wrong
-		 */
-		if (rq->nr_sectors < rq->current_nr_sectors) {
-			printk(KERN_ERR "blk: request botched\n");
-			rq->nr_sectors = rq->current_nr_sectors;
-		}
-	}
-}
-
 static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
 					     struct bio *bio)
 {
@@ -61,11 +32,12 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
 			 * never considered part of another segment, since that
 			 * might change with the bounce page.
 			 */
-			high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
+			high = page_to_pfn(bv->bv_page) > queue_bounce_pfn(q);
 			if (high || highprv)
 				goto new_segment;
 			if (cluster) {
-				if (seg_size + bv->bv_len > q->max_segment_size)
+				if (seg_size + bv->bv_len
+				    > queue_max_segment_size(q))
 					goto new_segment;
 				if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
 					goto new_segment;
@@ -120,7 +92,7 @@ static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio,
 		return 0;
 
 	if (bio->bi_seg_back_size + nxt->bi_seg_front_size >
-	    q->max_segment_size)
+	    queue_max_segment_size(q))
 		return 0;
 
 	if (!bio_has_data(bio))
@@ -163,7 +135,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
 		int nbytes = bvec->bv_len;
 
 		if (bvprv && cluster) {
-			if (sg->length + nbytes > q->max_segment_size)
+			if (sg->length + nbytes > queue_max_segment_size(q))
 				goto new_segment;
 
 			if (!BIOVEC_PHYS_MERGEABLE(bvprv, bvec))
@@ -199,8 +171,9 @@ new_segment:
 
 
 	if (unlikely(rq->cmd_flags & REQ_COPY_USER) &&
-	    (rq->data_len & q->dma_pad_mask)) {
-		unsigned int pad_len = (q->dma_pad_mask & ~rq->data_len) + 1;
+	    (blk_rq_bytes(rq) & q->dma_pad_mask)) {
+		unsigned int pad_len =
+			(q->dma_pad_mask & ~blk_rq_bytes(rq)) + 1;
 
 		sg->length += pad_len;
 		rq->extra_len += pad_len;
@@ -233,8 +206,8 @@ static inline int ll_new_hw_segment(struct request_queue *q,
 {
 	int nr_phys_segs = bio_phys_segments(q, bio);
 
-	if (req->nr_phys_segments + nr_phys_segs > q->max_hw_segments
-	    || req->nr_phys_segments + nr_phys_segs > q->max_phys_segments) {
+	if (req->nr_phys_segments + nr_phys_segs > queue_max_hw_segments(q) ||
+	    req->nr_phys_segments + nr_phys_segs > queue_max_phys_segments(q)) {
 		req->cmd_flags |= REQ_NOMERGE;
 		if (req == q->last_merge)
 			q->last_merge = NULL;
@@ -255,11 +228,11 @@ int ll_back_merge_fn(struct request_queue *q, struct request *req,
 	unsigned short max_sectors;
 
 	if (unlikely(blk_pc_request(req)))
-		max_sectors = q->max_hw_sectors;
+		max_sectors = queue_max_hw_sectors(q);
 	else
-		max_sectors = q->max_sectors;
+		max_sectors = queue_max_sectors(q);
 
-	if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
+	if (blk_rq_sectors(req) + bio_sectors(bio) > max_sectors) {
 		req->cmd_flags |= REQ_NOMERGE;
 		if (req == q->last_merge)
 			q->last_merge = NULL;
@@ -279,12 +252,12 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
 	unsigned short max_sectors;
 
 	if (unlikely(blk_pc_request(req)))
-		max_sectors = q->max_hw_sectors;
+		max_sectors = queue_max_hw_sectors(q);
 	else
-		max_sectors = q->max_sectors;
+		max_sectors = queue_max_sectors(q);
 
 
-	if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
+	if (blk_rq_sectors(req) + bio_sectors(bio) > max_sectors) {
 		req->cmd_flags |= REQ_NOMERGE;
 		if (req == q->last_merge)
 			q->last_merge = NULL;
@@ -315,7 +288,7 @@ static int ll_merge_requests_fn(struct request_queue *q, struct request *req,
 	/*
 	 * Will it become too large?
 	 */
-	if ((req->nr_sectors + next->nr_sectors) > q->max_sectors)
+	if ((blk_rq_sectors(req) + blk_rq_sectors(next)) > queue_max_sectors(q))
 		return 0;
 
 	total_phys_segments = req->nr_phys_segments + next->nr_phys_segments;
@@ -327,10 +300,10 @@ static int ll_merge_requests_fn(struct request_queue *q, struct request *req,
 		total_phys_segments--;
 	}
 
-	if (total_phys_segments > q->max_phys_segments)
+	if (total_phys_segments > queue_max_phys_segments(q))
 		return 0;
 
-	if (total_phys_segments > q->max_hw_segments)
+	if (total_phys_segments > queue_max_hw_segments(q))
 		return 0;
 
 	/* Merge is OK... */
@@ -345,7 +318,7 @@ static void blk_account_io_merge(struct request *req)
 		int cpu;
 
 		cpu = part_stat_lock();
-		part = disk_map_sector_rcu(req->rq_disk, req->sector);
+		part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
 
 		part_round_stats(cpu, part);
 		part_dec_in_flight(part);
@@ -366,7 +339,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
 	/*
 	 * not contiguous
 	 */
-	if (req->sector + req->nr_sectors != next->sector)
+	if (blk_rq_pos(req) + blk_rq_sectors(req) != blk_rq_pos(next))
 		return 0;
 
 	if (rq_data_dir(req) != rq_data_dir(next)
@@ -398,7 +371,7 @@ static int attempt_merge(struct request_queue *q, struct request *req,
 	req->biotail->bi_next = next->bio;
 	req->biotail = next->biotail;
 
-	req->nr_sectors = req->hard_nr_sectors += next->hard_nr_sectors;
+	req->__data_len += blk_rq_bytes(next);
 
 	elv_merge_requests(q, req, next);
 
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 57af728d94b..d71cedc09c4 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -134,7 +134,7 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	q->backing_dev_info.state = 0;
 	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
 	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
-	blk_queue_hardsect_size(q, 512);
+	blk_queue_logical_block_size(q, 512);
 	blk_queue_dma_alignment(q, 511);
 	blk_queue_congestion_threshold(q);
 	q->nr_batching = BLK_BATCH_REQ;
@@ -179,16 +179,16 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
 	 */
 	if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
 		dma = 1;
-	q->bounce_pfn = max_low_pfn;
+	q->limits.bounce_pfn = max_low_pfn;
 #else
 	if (b_pfn < blk_max_low_pfn)
 		dma = 1;
-	q->bounce_pfn = b_pfn;
+	q->limits.bounce_pfn = b_pfn;
 #endif
 	if (dma) {
 		init_emergency_isa_pool();
 		q->bounce_gfp = GFP_NOIO | GFP_DMA;
-		q->bounce_pfn = b_pfn;
+		q->limits.bounce_pfn = b_pfn;
 	}
 }
 EXPORT_SYMBOL(blk_queue_bounce_limit);
@@ -211,14 +211,23 @@ void blk_queue_max_sectors(struct request_queue *q, unsigned int max_sectors)
 	}
 
 	if (BLK_DEF_MAX_SECTORS > max_sectors)
-		q->max_hw_sectors = q->max_sectors = max_sectors;
+		q->limits.max_hw_sectors = q->limits.max_sectors = max_sectors;
 	else {
-		q->max_sectors = BLK_DEF_MAX_SECTORS;
-		q->max_hw_sectors = max_sectors;
+		q->limits.max_sectors = BLK_DEF_MAX_SECTORS;
+		q->limits.max_hw_sectors = max_sectors;
 	}
 }
 EXPORT_SYMBOL(blk_queue_max_sectors);
 
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_sectors)
+{
+	if (BLK_DEF_MAX_SECTORS > max_sectors)
+		q->limits.max_hw_sectors = BLK_DEF_MAX_SECTORS;
+	else
+		q->limits.max_hw_sectors = max_sectors;
+}
+EXPORT_SYMBOL(blk_queue_max_hw_sectors);
+
 /**
  * blk_queue_max_phys_segments - set max phys segments for a request for this queue
  * @q:  the request queue for the device
@@ -238,7 +247,7 @@ void blk_queue_max_phys_segments(struct request_queue *q,
 		       __func__, max_segments);
 	}
 
-	q->max_phys_segments = max_segments;
+	q->limits.max_phys_segments = max_segments;
 }
 EXPORT_SYMBOL(blk_queue_max_phys_segments);
 
@@ -262,7 +271,7 @@ void blk_queue_max_hw_segments(struct request_queue *q,
 		       __func__, max_segments);
 	}
 
-	q->max_hw_segments = max_segments;
+	q->limits.max_hw_segments = max_segments;
 }
 EXPORT_SYMBOL(blk_queue_max_hw_segments);
 
@@ -283,26 +292,110 @@ void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size)
 		       __func__, max_size);
 	}
 
-	q->max_segment_size = max_size;
+	q->limits.max_segment_size = max_size;
 }
 EXPORT_SYMBOL(blk_queue_max_segment_size);
 
 /**
- * blk_queue_hardsect_size - set hardware sector size for the queue
+ * blk_queue_logical_block_size - set logical block size for the queue
  * @q:  the request queue for the device
- * @size:  the hardware sector size, in bytes
+ * @size:  the logical block size, in bytes
  *
  * Description:
- *   This should typically be set to the lowest possible sector size
- *   that the hardware can operate on (possible without reverting to
- *   even internal read-modify-write operations). Usually the default
- *   of 512 covers most hardware.
+ *   This should be set to the lowest possible block size that the
+ *   storage device can address.  The default of 512 covers most
+ *   hardware.
  **/
-void blk_queue_hardsect_size(struct request_queue *q, unsigned short size)
+void blk_queue_logical_block_size(struct request_queue *q, unsigned short size)
+{
+	q->limits.logical_block_size = size;
+
+	if (q->limits.physical_block_size < size)
+		q->limits.physical_block_size = size;
+
+	if (q->limits.io_min < q->limits.physical_block_size)
+		q->limits.io_min = q->limits.physical_block_size;
+}
+EXPORT_SYMBOL(blk_queue_logical_block_size);
+
+/**
+ * blk_queue_physical_block_size - set physical block size for the queue
+ * @q:  the request queue for the device
+ * @size:  the physical block size, in bytes
+ *
+ * Description:
+ *   This should be set to the lowest possible sector size that the
+ *   hardware can operate on without reverting to read-modify-write
+ *   operations.
+ */
+void blk_queue_physical_block_size(struct request_queue *q, unsigned short size)
+{
+	q->limits.physical_block_size = size;
+
+	if (q->limits.physical_block_size < q->limits.logical_block_size)
+		q->limits.physical_block_size = q->limits.logical_block_size;
+
+	if (q->limits.io_min < q->limits.physical_block_size)
+		q->limits.io_min = q->limits.physical_block_size;
+}
+EXPORT_SYMBOL(blk_queue_physical_block_size);
+
+/**
+ * blk_queue_alignment_offset - set physical block alignment offset
+ * @q:	the request queue for the device
+ * @offset: alignment offset in bytes
+ *
+ * Description:
+ *   Some devices are naturally misaligned to compensate for things like
+ *   the legacy DOS partition table 63-sector offset.  Low-level drivers
+ *   should call this function for devices whose first sector is not
+ *   naturally aligned.
+ */
+void blk_queue_alignment_offset(struct request_queue *q, unsigned int offset)
 {
-	q->hardsect_size = size;
+	q->limits.alignment_offset =
+		offset & (q->limits.physical_block_size - 1);
+	q->limits.misaligned = 0;
 }
-EXPORT_SYMBOL(blk_queue_hardsect_size);
+EXPORT_SYMBOL(blk_queue_alignment_offset);
+
+/**
+ * blk_queue_io_min - set minimum request size for the queue
+ * @q:	the request queue for the device
+ * @min:  smallest I/O size in bytes
+ *
+ * Description:
+ *   Some devices have an internal block size bigger than the reported
+ *   hardware sector size.  This function can be used to signal the
+ *   smallest I/O the device can perform without incurring a performance
+ *   penalty.
+ */
+void blk_queue_io_min(struct request_queue *q, unsigned int min)
+{
+	q->limits.io_min = min;
+
+	if (q->limits.io_min < q->limits.logical_block_size)
+		q->limits.io_min = q->limits.logical_block_size;
+
+	if (q->limits.io_min < q->limits.physical_block_size)
+		q->limits.io_min = q->limits.physical_block_size;
+}
+EXPORT_SYMBOL(blk_queue_io_min);
+
+/**
+ * blk_queue_io_opt - set optimal request size for the queue
+ * @q:	the request queue for the device
+ * @opt:  optimal request size in bytes
+ *
+ * Description:
+ *   Drivers can call this function to set the preferred I/O request
+ *   size for devices that report such a value.
+ */
+void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
+{
+	q->limits.io_opt = opt;
+}
+EXPORT_SYMBOL(blk_queue_io_opt);
 
 /*
  * Returns the minimum that is _not_ zero, unless both are zero.
@@ -317,14 +410,27 @@ EXPORT_SYMBOL(blk_queue_hardsect_size);
 void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
 {
 	/* zero is "infinity" */
-	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
-	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
-	t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask);
+	t->limits.max_sectors = min_not_zero(queue_max_sectors(t),
+					     queue_max_sectors(b));
+
+	t->limits.max_hw_sectors = min_not_zero(queue_max_hw_sectors(t),
+						queue_max_hw_sectors(b));
+
+	t->limits.seg_boundary_mask = min_not_zero(queue_segment_boundary(t),
+						   queue_segment_boundary(b));
+
+	t->limits.max_phys_segments = min_not_zero(queue_max_phys_segments(t),
+						   queue_max_phys_segments(b));
+
+	t->limits.max_hw_segments = min_not_zero(queue_max_hw_segments(t),
+						 queue_max_hw_segments(b));
+
+	t->limits.max_segment_size = min_not_zero(queue_max_segment_size(t),
+						  queue_max_segment_size(b));
+
+	t->limits.logical_block_size = max(queue_logical_block_size(t),
+					   queue_logical_block_size(b));
 
-	t->max_phys_segments = min_not_zero(t->max_phys_segments, b->max_phys_segments);
-	t->max_hw_segments = min_not_zero(t->max_hw_segments, b->max_hw_segments);
-	t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size);
-	t->hardsect_size = max(t->hardsect_size, b->hardsect_size);
 	if (!t->queue_lock)
 		WARN_ON_ONCE(1);
 	else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
@@ -337,6 +443,109 @@ void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
 EXPORT_SYMBOL(blk_queue_stack_limits);
 
 /**
+ * blk_stack_limits - adjust queue_limits for stacked devices
+ * @t:	the stacking driver limits (top)
+ * @b:  the underlying queue limits (bottom)
+ * @offset:  offset to beginning of data within component device
+ *
+ * Description:
+ *    Merges two queue_limit structs.  Returns 0 if alignment didn't
+ *    change.  Returns -1 if adding the bottom device caused
+ *    misalignment.
+ */
+int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
+		     sector_t offset)
+{
+	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
+	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+	t->bounce_pfn = min_not_zero(t->bounce_pfn, b->bounce_pfn);
+
+	t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
+					    b->seg_boundary_mask);
+
+	t->max_phys_segments = min_not_zero(t->max_phys_segments,
+					    b->max_phys_segments);
+
+	t->max_hw_segments = min_not_zero(t->max_hw_segments,
+					  b->max_hw_segments);
+
+	t->max_segment_size = min_not_zero(t->max_segment_size,
+					   b->max_segment_size);
+
+	t->logical_block_size = max(t->logical_block_size,
+				    b->logical_block_size);
+
+	t->physical_block_size = max(t->physical_block_size,
+				     b->physical_block_size);
+
+	t->io_min = max(t->io_min, b->io_min);
+	t->no_cluster |= b->no_cluster;
+
+	/* Bottom device offset aligned? */
+	if (offset &&
+	    (offset & (b->physical_block_size - 1)) != b->alignment_offset) {
+		t->misaligned = 1;
+		return -1;
+	}
+
+	/* If top has no alignment offset, inherit from bottom */
+	if (!t->alignment_offset)
+		t->alignment_offset =
+			b->alignment_offset & (b->physical_block_size - 1);
+
+	/* Top device aligned on logical block boundary? */
+	if (t->alignment_offset & (t->logical_block_size - 1)) {
+		t->misaligned = 1;
+		return -1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(blk_stack_limits);
+
+/**
+ * disk_stack_limits - adjust queue limits for stacked drivers
+ * @disk:  MD/DM gendisk (top)
+ * @bdev:  the underlying block device (bottom)
+ * @offset:  offset to beginning of data within component device
+ *
+ * Description:
+ *    Merges the limits for two queues.  Returns 0 if alignment
+ *    didn't change.  Returns -1 if adding the bottom device caused
+ *    misalignment.
+ */
+void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
+		       sector_t offset)
+{
+	struct request_queue *t = disk->queue;
+	struct request_queue *b = bdev_get_queue(bdev);
+
+	offset += get_start_sect(bdev) << 9;
+
+	if (blk_stack_limits(&t->limits, &b->limits, offset) < 0) {
+		char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
+
+		disk_name(disk, 0, top);
+		bdevname(bdev, bottom);
+
+		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
+		       top, bottom);
+	}
+
+	if (!t->queue_lock)
+		WARN_ON_ONCE(1);
+	else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(t->queue_lock, flags);
+		if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
+			queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
+		spin_unlock_irqrestore(t->queue_lock, flags);
+	}
+}
+EXPORT_SYMBOL(disk_stack_limits);
+
+/**
  * blk_queue_dma_pad - set pad mask
  * @q:     the request queue for the device
  * @mask:  pad mask
@@ -396,11 +605,11 @@ int blk_queue_dma_drain(struct request_queue *q,
 			       dma_drain_needed_fn *dma_drain_needed,
 			       void *buf, unsigned int size)
 {
-	if (q->max_hw_segments < 2 || q->max_phys_segments < 2)
+	if (queue_max_hw_segments(q) < 2 || queue_max_phys_segments(q) < 2)
 		return -EINVAL;
 	/* make room for appending the drain */
-	--q->max_hw_segments;
-	--q->max_phys_segments;
+	blk_queue_max_hw_segments(q, queue_max_hw_segments(q) - 1);
+	blk_queue_max_phys_segments(q, queue_max_phys_segments(q) - 1);
 	q->dma_drain_needed = dma_drain_needed;
 	q->dma_drain_buffer = buf;
 	q->dma_drain_size = size;
@@ -422,7 +631,7 @@ void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask)
 		       __func__, mask);
 	}
 
-	q->seg_boundary_mask = mask;
+	q->limits.seg_boundary_mask = mask;
 }
 EXPORT_SYMBOL(blk_queue_segment_boundary);
 
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 3ff9bba3379..b1cd04087d6 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -95,21 +95,36 @@ queue_ra_store(struct request_queue *q, const char *page, size_t count)
 
 static ssize_t queue_max_sectors_show(struct request_queue *q, char *page)
 {
-	int max_sectors_kb = q->max_sectors >> 1;
+	int max_sectors_kb = queue_max_sectors(q) >> 1;
 
 	return queue_var_show(max_sectors_kb, (page));
 }
 
-static ssize_t queue_hw_sector_size_show(struct request_queue *q, char *page)
+static ssize_t queue_logical_block_size_show(struct request_queue *q, char *page)
 {
-	return queue_var_show(q->hardsect_size, page);
+	return queue_var_show(queue_logical_block_size(q), page);
+}
+
+static ssize_t queue_physical_block_size_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(queue_physical_block_size(q), page);
+}
+
+static ssize_t queue_io_min_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(queue_io_min(q), page);
+}
+
+static ssize_t queue_io_opt_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(queue_io_opt(q), page);
 }
 
 static ssize_t
 queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
 {
 	unsigned long max_sectors_kb,
-			max_hw_sectors_kb = q->max_hw_sectors >> 1,
+		max_hw_sectors_kb = queue_max_hw_sectors(q) >> 1,
 			page_kb = 1 << (PAGE_CACHE_SHIFT - 10);
 	ssize_t ret = queue_var_store(&max_sectors_kb, page, count);
 
@@ -117,7 +132,7 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
 		return -EINVAL;
 
 	spin_lock_irq(q->queue_lock);
-	q->max_sectors = max_sectors_kb << 1;
+	blk_queue_max_sectors(q, max_sectors_kb << 1);
 	spin_unlock_irq(q->queue_lock);
 
 	return ret;
@@ -125,7 +140,7 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
 
 static ssize_t queue_max_hw_sectors_show(struct request_queue *q, char *page)
 {
-	int max_hw_sectors_kb = q->max_hw_sectors >> 1;
+	int max_hw_sectors_kb = queue_max_hw_sectors(q) >> 1;
 
 	return queue_var_show(max_hw_sectors_kb, (page));
 }
@@ -249,7 +264,27 @@ static struct queue_sysfs_entry queue_iosched_entry = {
 
 static struct queue_sysfs_entry queue_hw_sector_size_entry = {
 	.attr = {.name = "hw_sector_size", .mode = S_IRUGO },
-	.show = queue_hw_sector_size_show,
+	.show = queue_logical_block_size_show,
+};
+
+static struct queue_sysfs_entry queue_logical_block_size_entry = {
+	.attr = {.name = "logical_block_size", .mode = S_IRUGO },
+	.show = queue_logical_block_size_show,
+};
+
+static struct queue_sysfs_entry queue_physical_block_size_entry = {
+	.attr = {.name = "physical_block_size", .mode = S_IRUGO },
+	.show = queue_physical_block_size_show,
+};
+
+static struct queue_sysfs_entry queue_io_min_entry = {
+	.attr = {.name = "minimum_io_size", .mode = S_IRUGO },
+	.show = queue_io_min_show,
+};
+
+static struct queue_sysfs_entry queue_io_opt_entry = {
+	.attr = {.name = "optimal_io_size", .mode = S_IRUGO },
+	.show = queue_io_opt_show,
 };
 
 static struct queue_sysfs_entry queue_nonrot_entry = {
@@ -283,6 +318,10 @@ static struct attribute *default_attrs[] = {
 	&queue_max_sectors_entry.attr,
 	&queue_iosched_entry.attr,
 	&queue_hw_sector_size_entry.attr,
+	&queue_logical_block_size_entry.attr,
+	&queue_physical_block_size_entry.attr,
+	&queue_io_min_entry.attr,
+	&queue_io_opt_entry.attr,
 	&queue_nonrot_entry.attr,
 	&queue_nomerges_entry.attr,
 	&queue_rq_affinity_entry.attr,
@@ -383,22 +422,26 @@ struct kobj_type blk_queue_ktype = {
 int blk_register_queue(struct gendisk *disk)
 {
 	int ret;
+	struct device *dev = disk_to_dev(disk);
 
 	struct request_queue *q = disk->queue;
 
 	if (WARN_ON(!q))
 		return -ENXIO;
 
-	if (!q->request_fn)
-		return 0;
+	ret = blk_trace_init_sysfs(dev);
+	if (ret)
+		return ret;
 
-	ret = kobject_add(&q->kobj, kobject_get(&disk_to_dev(disk)->kobj),
-			  "%s", "queue");
+	ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
 	if (ret < 0)
 		return ret;
 
 	kobject_uevent(&q->kobj, KOBJ_ADD);
 
+	if (!q->request_fn)
+		return 0;
+
 	ret = elv_register_queue(q);
 	if (ret) {
 		kobject_uevent(&q->kobj, KOBJ_REMOVE);
diff --git a/block/blk-tag.c b/block/blk-tag.c
index 3c518e3303a..2e5cfeb5933 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -336,7 +336,7 @@ EXPORT_SYMBOL(blk_queue_end_tag);
 int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 {
 	struct blk_queue_tag *bqt = q->queue_tags;
-	unsigned max_depth, offset;
+	unsigned max_depth;
 	int tag;
 
 	if (unlikely((rq->cmd_flags & REQ_QUEUED))) {
@@ -355,13 +355,16 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 	 * to starve sync IO on behalf of flooding async IO.
 	 */
 	max_depth = bqt->max_depth;
-	if (rq_is_sync(rq))
-		offset = 0;
-	else
-		offset = max_depth >> 2;
+	if (!rq_is_sync(rq) && max_depth > 1) {
+		max_depth -= 2;
+		if (!max_depth)
+			max_depth = 1;
+		if (q->in_flight[0] > max_depth)
+			return 1;
+	}
 
 	do {
-		tag = find_next_zero_bit(bqt->tag_map, max_depth, offset);
+		tag = find_first_zero_bit(bqt->tag_map, max_depth);
 		if (tag >= max_depth)
 			return 1;
 
@@ -374,7 +377,7 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 	rq->cmd_flags |= REQ_QUEUED;
 	rq->tag = tag;
 	bqt->tag_index[tag] = rq;
-	blkdev_dequeue_request(rq);
+	blk_start_request(rq);
 	list_add(&rq->queuelist, &q->tag_busy_list);
 	return 0;
 }
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 1ec0d503cac..1ba7e0aca87 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -122,10 +122,8 @@ void blk_rq_timed_out_timer(unsigned long data)
 			if (blk_mark_rq_complete(rq))
 				continue;
 			blk_rq_timed_out(rq);
-		} else {
-			if (!next || time_after(next, rq->deadline))
-				next = rq->deadline;
-		}
+		} else if (!next || time_after(next, rq->deadline))
+			next = rq->deadline;
 	}
 
 	/*
@@ -176,16 +174,14 @@ void blk_add_timer(struct request *req)
 	BUG_ON(!list_empty(&req->timeout_list));
 	BUG_ON(test_bit(REQ_ATOM_COMPLETE, &req->atomic_flags));
 
-	if (req->timeout)
-		req->deadline = jiffies + req->timeout;
-	else {
-		req->deadline = jiffies + q->rq_timeout;
-		/*
-		 * Some LLDs, like scsi, peek at the timeout to prevent
-		 * a command from being retried forever.
-		 */
+	/*
+	 * Some LLDs, like scsi, peek at the timeout to prevent a
+	 * command from being retried forever.
+	 */
+	if (!req->timeout)
 		req->timeout = q->rq_timeout;
-	}
+
+	req->deadline = jiffies + req->timeout;
 	list_add_tail(&req->timeout_list, &q->timeout_list);
 
 	/*
diff --git a/block/blk.h b/block/blk.h
index 79c85f7c9ff..3fae6add543 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -13,6 +13,9 @@ extern struct kobj_type blk_queue_ktype;
 void init_request_from_bio(struct request *req, struct bio *bio);
 void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 			struct bio *bio);
+int blk_rq_append_bio(struct request_queue *q, struct request *rq,
+		      struct bio *bio);
+void blk_dequeue_request(struct request *rq);
 void __blk_queue_free_tags(struct request_queue *q);
 
 void blk_unplug_work(struct work_struct *work);
@@ -43,6 +46,43 @@ static inline void blk_clear_rq_complete(struct request *rq)
 	clear_bit(REQ_ATOM_COMPLETE, &rq->atomic_flags);
 }
 
+/*
+ * Internal elevator interface
+ */
+#define ELV_ON_HASH(rq)		(!hlist_unhashed(&(rq)->hash))
+
+static inline struct request *__elv_next_request(struct request_queue *q)
+{
+	struct request *rq;
+
+	while (1) {
+		while (!list_empty(&q->queue_head)) {
+			rq = list_entry_rq(q->queue_head.next);
+			if (blk_do_ordered(q, &rq))
+				return rq;
+		}
+
+		if (!q->elevator->ops->elevator_dispatch_fn(q, 0))
+			return NULL;
+	}
+}
+
+static inline void elv_activate_rq(struct request_queue *q, struct request *rq)
+{
+	struct elevator_queue *e = q->elevator;
+
+	if (e->ops->elevator_activate_req_fn)
+		e->ops->elevator_activate_req_fn(q, rq);
+}
+
+static inline void elv_deactivate_rq(struct request_queue *q, struct request *rq)
+{
+	struct elevator_queue *e = q->elevator;
+
+	if (e->ops->elevator_deactivate_req_fn)
+		e->ops->elevator_deactivate_req_fn(q, rq);
+}
+
 #ifdef CONFIG_FAIL_IO_TIMEOUT
 int blk_should_fake_timeout(struct request_queue *);
 ssize_t part_timeout_show(struct device *, struct device_attribute *, char *);
@@ -64,7 +104,6 @@ int ll_front_merge_fn(struct request_queue *q, struct request *req,
 int attempt_back_merge(struct request_queue *q, struct request *rq);
 int attempt_front_merge(struct request_queue *q, struct request *rq);
 void blk_recalc_rq_segments(struct request *rq);
-void blk_recalc_rq_sectors(struct request *rq, int nsect);
 
 void blk_queue_congestion_threshold(struct request_queue *q);
 
@@ -112,9 +151,17 @@ static inline int blk_cpu_to_group(int cpu)
 #endif
 }
 
+/*
+ * Contribute to IO statistics IFF:
+ *
+ *	a) it's attached to a gendisk, and
+ *	b) the queue had IO stats enabled when this request was started, and
+ *	c) it's a file system request or a discard request
+ */
 static inline int blk_do_io_stat(struct request *rq)
 {
-	return rq->rq_disk && blk_rq_io_stat(rq);
+	return rq->rq_disk && blk_rq_io_stat(rq) &&
+	       (blk_fs_request(rq) || blk_discard_rq(rq));
 }
 
 #endif
diff --git a/block/bsg.c b/block/bsg.c
index 206060e795d..5358f9ae13c 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -315,6 +315,7 @@ out:
 	blk_put_request(rq);
 	if (next_rq) {
 		blk_rq_unmap_user(next_rq->bio);
+		next_rq->bio = NULL;
 		blk_put_request(next_rq);
 	}
 	return ERR_PTR(ret);
@@ -445,14 +446,15 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
 	}
 
 	if (rq->next_rq) {
-		hdr->dout_resid = rq->data_len;
-		hdr->din_resid = rq->next_rq->data_len;
+		hdr->dout_resid = rq->resid_len;
+		hdr->din_resid = rq->next_rq->resid_len;
 		blk_rq_unmap_user(bidi_bio);
+		rq->next_rq->bio = NULL;
 		blk_put_request(rq->next_rq);
 	} else if (rq_data_dir(rq) == READ)
-		hdr->din_resid = rq->data_len;
+		hdr->din_resid = rq->resid_len;
 	else
-		hdr->dout_resid = rq->data_len;
+		hdr->dout_resid = rq->resid_len;
 
 	/*
 	 * If the request generated a negative error number, return it
@@ -466,6 +468,7 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
 	blk_rq_unmap_user(bio);
 	if (rq->cmd != rq->__cmd)
 		kfree(rq->cmd);
+	rq->bio = NULL;
 	blk_put_request(rq);
 
 	return ret;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index a55a9bd75bd..ef2f72d4243 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -349,8 +349,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2)
 	else if (rq_is_meta(rq2) && !rq_is_meta(rq1))
 		return rq2;
 
-	s1 = rq1->sector;
-	s2 = rq2->sector;
+	s1 = blk_rq_pos(rq1);
+	s2 = blk_rq_pos(rq2);
 
 	last = cfqd->last_position;
 
@@ -579,9 +579,9 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
 		 * Sort strictly based on sector.  Smallest to the left,
 		 * largest to the right.
 		 */
-		if (sector > cfqq->next_rq->sector)
+		if (sector > blk_rq_pos(cfqq->next_rq))
 			n = &(*p)->rb_right;
-		else if (sector < cfqq->next_rq->sector)
+		else if (sector < blk_rq_pos(cfqq->next_rq))
 			n = &(*p)->rb_left;
 		else
 			break;
@@ -611,8 +611,8 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 		return;
 
 	cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
-	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
-					 &parent, &p);
+	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root,
+				      blk_rq_pos(cfqq->next_rq), &parent, &p);
 	if (!__cfqq) {
 		rb_link_node(&cfqq->p_node, parent, p);
 		rb_insert_color(&cfqq->p_node, cfqq->p_root);
@@ -760,7 +760,7 @@ static void cfq_activate_request(struct request_queue *q, struct request *rq)
 	cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "activate rq, drv=%d",
 						cfqd->rq_in_driver);
 
-	cfqd->last_position = rq->hard_sector + rq->hard_nr_sectors;
+	cfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
 }
 
 static void cfq_deactivate_request(struct request_queue *q, struct request *rq)
@@ -949,10 +949,10 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
 static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd,
 					  struct request *rq)
 {
-	if (rq->sector >= cfqd->last_position)
-		return rq->sector - cfqd->last_position;
+	if (blk_rq_pos(rq) >= cfqd->last_position)
+		return blk_rq_pos(rq) - cfqd->last_position;
 	else
-		return cfqd->last_position - rq->sector;
+		return cfqd->last_position - blk_rq_pos(rq);
 }
 
 #define CIC_SEEK_THR	8 * 1024
@@ -996,7 +996,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
 	if (cfq_rq_close(cfqd, __cfqq->next_rq))
 		return __cfqq;
 
-	if (__cfqq->next_rq->sector < sector)
+	if (blk_rq_pos(__cfqq->next_rq) < sector)
 		node = rb_next(&__cfqq->p_node);
 	else
 		node = rb_prev(&__cfqq->p_node);
@@ -1282,7 +1282,7 @@ static void cfq_dispatch_request(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 	if (!cfqd->active_cic) {
 		struct cfq_io_context *cic = RQ_CIC(rq);
 
-		atomic_inc(&cic->ioc->refcount);
+		atomic_long_inc(&cic->ioc->refcount);
 		cfqd->active_cic = cic;
 	}
 }
@@ -1918,10 +1918,10 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic,
 
 	if (!cic->last_request_pos)
 		sdist = 0;
-	else if (cic->last_request_pos < rq->sector)
-		sdist = rq->sector - cic->last_request_pos;
+	else if (cic->last_request_pos < blk_rq_pos(rq))
+		sdist = blk_rq_pos(rq) - cic->last_request_pos;
 	else
-		sdist = cic->last_request_pos - rq->sector;
+		sdist = cic->last_request_pos - blk_rq_pos(rq);
 
 	/*
 	 * Don't allow the seek distance to get too large from the
@@ -2071,7 +2071,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 	cfq_update_io_seektime(cfqd, cic, rq);
 	cfq_update_idle_window(cfqd, cfqq, cic);
 
-	cic->last_request_pos = rq->sector + rq->nr_sectors;
+	cic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
 
 	if (cfqq == cfqd->active_queue) {
 		/*
@@ -2088,7 +2088,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 			if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
 			    cfqd->busy_queues > 1) {
 				del_timer(&cfqd->idle_slice_timer);
-				blk_start_queueing(cfqd->queue);
+			__blk_run_queue(cfqd->queue);
 			}
 			cfq_mark_cfqq_must_dispatch(cfqq);
 		}
@@ -2100,7 +2100,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		 * this new queue is RT and the current one is BE
 		 */
 		cfq_preempt_queue(cfqd, cfqq);
-		blk_start_queueing(cfqd->queue);
+		__blk_run_queue(cfqd->queue);
 	}
 }
 
@@ -2345,7 +2345,7 @@ static void cfq_kick_queue(struct work_struct *work)
 	struct request_queue *q = cfqd->queue;
 
 	spin_lock_irq(q->queue_lock);
-	blk_start_queueing(q);
+	__blk_run_queue(cfqd->queue);
 	spin_unlock_irq(q->queue_lock);
 }
 
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index f87615dea46..7865a34e0fa 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -568,7 +568,7 @@ static int compat_blk_trace_setup(struct block_device *bdev, char __user *arg)
 	memcpy(&buts.name, &cbuts.name, 32);
 
 	mutex_lock(&bdev->bd_mutex);
-	ret = do_blk_trace_setup(q, b, bdev->bd_dev, &buts);
+	ret = do_blk_trace_setup(q, b, bdev->bd_dev, bdev, &buts);
 	mutex_unlock(&bdev->bd_mutex);
 	if (ret)
 		return ret;
@@ -763,10 +763,10 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	case BLKBSZGET_32: /* get the logical block size (cf. BLKSSZGET) */
 		return compat_put_int(arg, block_size(bdev));
 	case BLKSSZGET: /* get block device hardware sector size */
-		return compat_put_int(arg, bdev_hardsect_size(bdev));
+		return compat_put_int(arg, bdev_logical_block_size(bdev));
 	case BLKSECTGET:
 		return compat_put_ushort(arg,
-					 bdev_get_queue(bdev)->max_sectors);
+					 queue_max_sectors(bdev_get_queue(bdev)));
 	case BLKRASET: /* compatible, but no compat_ptr (!) */
 	case BLKFRASET:
 		if (!capable(CAP_SYS_ADMIN))
diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c
index c4d991d4ade..b547cbca7b2 100644
--- a/block/deadline-iosched.c
+++ b/block/deadline-iosched.c
@@ -138,7 +138,7 @@ deadline_merge(struct request_queue *q, struct request **req, struct bio *bio)
 
 		__rq = elv_rb_find(&dd->sort_list[bio_data_dir(bio)], sector);
 		if (__rq) {
-			BUG_ON(sector != __rq->sector);
+			BUG_ON(sector != blk_rq_pos(__rq));
 
 			if (elv_rq_merge_ok(__rq, bio)) {
 				ret = ELEVATOR_FRONT_MERGE;
diff --git a/block/elevator.c b/block/elevator.c
index 7073a907257..ca861927ba4 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -33,17 +33,16 @@
 #include <linux/compiler.h>
 #include <linux/delay.h>
 #include <linux/blktrace_api.h>
-#include <trace/block.h>
 #include <linux/hash.h>
 #include <linux/uaccess.h>
 
+#include <trace/events/block.h>
+
 #include "blk.h"
 
 static DEFINE_SPINLOCK(elv_list_lock);
 static LIST_HEAD(elv_list);
 
-DEFINE_TRACE(block_rq_abort);
-
 /*
  * Merge hash stuff.
  */
@@ -52,11 +51,7 @@ static const int elv_hash_shift = 6;
 #define ELV_HASH_FN(sec)	\
 		(hash_long(ELV_HASH_BLOCK((sec)), elv_hash_shift))
 #define ELV_HASH_ENTRIES	(1 << elv_hash_shift)
-#define rq_hash_key(rq)		((rq)->sector + (rq)->nr_sectors)
-#define ELV_ON_HASH(rq)		(!hlist_unhashed(&(rq)->hash))
-
-DEFINE_TRACE(block_rq_insert);
-DEFINE_TRACE(block_rq_issue);
+#define rq_hash_key(rq)		(blk_rq_pos(rq) + blk_rq_sectors(rq))
 
 /*
  * Query io scheduler to see if the current process issuing bio may be
@@ -120,9 +115,9 @@ static inline int elv_try_merge(struct request *__rq, struct bio *bio)
 	 * we can merge and sequence is ok, check if it's possible
 	 */
 	if (elv_rq_merge_ok(__rq, bio)) {
-		if (__rq->sector + __rq->nr_sectors == bio->bi_sector)
+		if (blk_rq_pos(__rq) + blk_rq_sectors(__rq) == bio->bi_sector)
 			ret = ELEVATOR_BACK_MERGE;
-		else if (__rq->sector - bio_sectors(bio) == bio->bi_sector)
+		else if (blk_rq_pos(__rq) - bio_sectors(bio) == bio->bi_sector)
 			ret = ELEVATOR_FRONT_MERGE;
 	}
 
@@ -310,22 +305,6 @@ void elevator_exit(struct elevator_queue *e)
 }
 EXPORT_SYMBOL(elevator_exit);
 
-static void elv_activate_rq(struct request_queue *q, struct request *rq)
-{
-	struct elevator_queue *e = q->elevator;
-
-	if (e->ops->elevator_activate_req_fn)
-		e->ops->elevator_activate_req_fn(q, rq);
-}
-
-static void elv_deactivate_rq(struct request_queue *q, struct request *rq)
-{
-	struct elevator_queue *e = q->elevator;
-
-	if (e->ops->elevator_deactivate_req_fn)
-		e->ops->elevator_deactivate_req_fn(q, rq);
-}
-
 static inline void __elv_rqhash_del(struct request *rq)
 {
 	hlist_del_init(&rq->hash);
@@ -387,9 +366,9 @@ struct request *elv_rb_add(struct rb_root *root, struct request *rq)
 		parent = *p;
 		__rq = rb_entry(parent, struct request, rb_node);
 
-		if (rq->sector < __rq->sector)
+		if (blk_rq_pos(rq) < blk_rq_pos(__rq))
 			p = &(*p)->rb_left;
-		else if (rq->sector > __rq->sector)
+		else if (blk_rq_pos(rq) > blk_rq_pos(__rq))
 			p = &(*p)->rb_right;
 		else
 			return __rq;
@@ -417,9 +396,9 @@ struct request *elv_rb_find(struct rb_root *root, sector_t sector)
 	while (n) {
 		rq = rb_entry(n, struct request, rb_node);
 
-		if (sector < rq->sector)
+		if (sector < blk_rq_pos(rq))
 			n = n->rb_left;
-		else if (sector > rq->sector)
+		else if (sector > blk_rq_pos(rq))
 			n = n->rb_right;
 		else
 			return rq;
@@ -458,14 +437,14 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
 			break;
 		if (pos->cmd_flags & stop_flags)
 			break;
-		if (rq->sector >= boundary) {
-			if (pos->sector < boundary)
+		if (blk_rq_pos(rq) >= boundary) {
+			if (blk_rq_pos(pos) < boundary)
 				continue;
 		} else {
-			if (pos->sector >= boundary)
+			if (blk_rq_pos(pos) >= boundary)
 				break;
 		}
-		if (rq->sector >= pos->sector)
+		if (blk_rq_pos(rq) >= blk_rq_pos(pos))
 			break;
 	}
 
@@ -563,7 +542,7 @@ void elv_requeue_request(struct request_queue *q, struct request *rq)
 	 * in_flight count again
 	 */
 	if (blk_account_rq(rq)) {
-		q->in_flight--;
+		q->in_flight[rq_is_sync(rq)]--;
 		if (blk_sorted_rq(rq))
 			elv_deactivate_rq(q, rq);
 	}
@@ -592,6 +571,9 @@ void elv_drain_elevator(struct request_queue *q)
  */
 void elv_quiesce_start(struct request_queue *q)
 {
+	if (!q->elevator)
+		return;
+
 	queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
 
 	/*
@@ -599,7 +581,7 @@ void elv_quiesce_start(struct request_queue *q)
 	 */
 	elv_drain_elevator(q);
 	while (q->rq.elvpriv) {
-		blk_start_queueing(q);
+		__blk_run_queue(q);
 		spin_unlock_irq(q->queue_lock);
 		msleep(10);
 		spin_lock_irq(q->queue_lock);
@@ -643,8 +625,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 		 *   with anything.  There's no point in delaying queue
 		 *   processing.
 		 */
-		blk_remove_plug(q);
-		blk_start_queueing(q);
+		__blk_run_queue(q);
 		break;
 
 	case ELEVATOR_INSERT_SORT:
@@ -703,7 +684,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 
 	if (unplug_it && blk_queue_plugged(q)) {
 		int nrq = q->rq.count[BLK_RW_SYNC] + q->rq.count[BLK_RW_ASYNC]
-			- q->in_flight;
+				- queue_in_flight(q);
 
 		if (nrq >= q->unplug_thresh)
 			__generic_unplug_device(q);
@@ -759,117 +740,6 @@ void elv_add_request(struct request_queue *q, struct request *rq, int where,
 }
 EXPORT_SYMBOL(elv_add_request);
 
-static inline struct request *__elv_next_request(struct request_queue *q)
-{
-	struct request *rq;
-
-	while (1) {
-		while (!list_empty(&q->queue_head)) {
-			rq = list_entry_rq(q->queue_head.next);
-			if (blk_do_ordered(q, &rq))
-				return rq;
-		}
-
-		if (!q->elevator->ops->elevator_dispatch_fn(q, 0))
-			return NULL;
-	}
-}
-
-struct request *elv_next_request(struct request_queue *q)
-{
-	struct request *rq;
-	int ret;
-
-	while ((rq = __elv_next_request(q)) != NULL) {
-		if (!(rq->cmd_flags & REQ_STARTED)) {
-			/*
-			 * This is the first time the device driver
-			 * sees this request (possibly after
-			 * requeueing).  Notify IO scheduler.
-			 */
-			if (blk_sorted_rq(rq))
-				elv_activate_rq(q, rq);
-
-			/*
-			 * just mark as started even if we don't start
-			 * it, a request that has been delayed should
-			 * not be passed by new incoming requests
-			 */
-			rq->cmd_flags |= REQ_STARTED;
-			trace_block_rq_issue(q, rq);
-		}
-
-		if (!q->boundary_rq || q->boundary_rq == rq) {
-			q->end_sector = rq_end_sector(rq);
-			q->boundary_rq = NULL;
-		}
-
-		if (rq->cmd_flags & REQ_DONTPREP)
-			break;
-
-		if (q->dma_drain_size && rq->data_len) {
-			/*
-			 * make sure space for the drain appears we
-			 * know we can do this because max_hw_segments
-			 * has been adjusted to be one fewer than the
-			 * device can handle
-			 */
-			rq->nr_phys_segments++;
-		}
-
-		if (!q->prep_rq_fn)
-			break;
-
-		ret = q->prep_rq_fn(q, rq);
-		if (ret == BLKPREP_OK) {
-			break;
-		} else if (ret == BLKPREP_DEFER) {
-			/*
-			 * the request may have been (partially) prepped.
-			 * we need to keep this request in the front to
-			 * avoid resource deadlock.  REQ_STARTED will
-			 * prevent other fs requests from passing this one.
-			 */
-			if (q->dma_drain_size && rq->data_len &&
-			    !(rq->cmd_flags & REQ_DONTPREP)) {
-				/*
-				 * remove the space for the drain we added
-				 * so that we don't add it again
-				 */
-				--rq->nr_phys_segments;
-			}
-
-			rq = NULL;
-			break;
-		} else if (ret == BLKPREP_KILL) {
-			rq->cmd_flags |= REQ_QUIET;
-			__blk_end_request(rq, -EIO, blk_rq_bytes(rq));
-		} else {
-			printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
-			break;
-		}
-	}
-
-	return rq;
-}
-EXPORT_SYMBOL(elv_next_request);
-
-void elv_dequeue_request(struct request_queue *q, struct request *rq)
-{
-	BUG_ON(list_empty(&rq->queuelist));
-	BUG_ON(ELV_ON_HASH(rq));
-
-	list_del_init(&rq->queuelist);
-
-	/*
-	 * the time frame between a request being removed from the lists
-	 * and to it is freed is accounted as io that is in progress at
-	 * the driver side.
-	 */
-	if (blk_account_rq(rq))
-		q->in_flight++;
-}
-
 int elv_queue_empty(struct request_queue *q)
 {
 	struct elevator_queue *e = q->elevator;
@@ -939,7 +809,12 @@ void elv_abort_queue(struct request_queue *q)
 		rq = list_entry_rq(q->queue_head.next);
 		rq->cmd_flags |= REQ_QUIET;
 		trace_block_rq_abort(q, rq);
-		__blk_end_request(rq, -EIO, blk_rq_bytes(rq));
+		/*
+		 * Mark this request as started so we don't trigger
+		 * any debug logic in the end I/O path.
+		 */
+		blk_start_request(rq);
+		__blk_end_request_all(rq, -EIO);
 	}
 }
 EXPORT_SYMBOL(elv_abort_queue);
@@ -952,7 +827,7 @@ void elv_completed_request(struct request_queue *q, struct request *rq)
 	 * request is released from the driver, io must be done
 	 */
 	if (blk_account_rq(rq)) {
-		q->in_flight--;
+		q->in_flight[rq_is_sync(rq)]--;
 		if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn)
 			e->ops->elevator_completed_req_fn(q, rq);
 	}
@@ -967,11 +842,11 @@ void elv_completed_request(struct request_queue *q, struct request *rq)
 		if (!list_empty(&q->queue_head))
 			next = list_entry_rq(q->queue_head.next);
 
-		if (!q->in_flight &&
+		if (!queue_in_flight(q) &&
 		    blk_ordered_cur_seq(q) == QUEUE_ORDSEQ_DRAIN &&
 		    (!next || blk_ordered_req_seq(next) > QUEUE_ORDSEQ_DRAIN)) {
 			blk_ordered_complete_seq(q, QUEUE_ORDSEQ_DRAIN, 0);
-			blk_start_queueing(q);
+			__blk_run_queue(q);
 		}
 	}
 }
@@ -1179,6 +1054,9 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name,
 	char elevator_name[ELV_NAME_MAX];
 	struct elevator_type *e;
 
+	if (!q->elevator)
+		return count;
+
 	strlcpy(elevator_name, name, sizeof(elevator_name));
 	strstrip(elevator_name);
 
@@ -1202,10 +1080,15 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name,
 ssize_t elv_iosched_show(struct request_queue *q, char *name)
 {
 	struct elevator_queue *e = q->elevator;
-	struct elevator_type *elv = e->elevator_type;
+	struct elevator_type *elv;
 	struct elevator_type *__e;
 	int len = 0;
 
+	if (!q->elevator)
+		return sprintf(name, "none\n");
+
+	elv = e->elevator_type;
+
 	spin_lock(&elv_list_lock);
 	list_for_each_entry(__e, &elv_list, list) {
 		if (!strcmp(elv->elevator_name, __e->elevator_name))
diff --git a/block/genhd.c b/block/genhd.c
index 1a4916e0173..fe7ccc0a618 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -852,11 +852,21 @@ static ssize_t disk_capability_show(struct device *dev,
 	return sprintf(buf, "%x\n", disk->flags);
 }
 
+static ssize_t disk_alignment_offset_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct gendisk *disk = dev_to_disk(dev);
+
+	return sprintf(buf, "%d\n", queue_alignment_offset(disk->queue));
+}
+
 static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
 static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
 static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
 static DEVICE_ATTR(ro, S_IRUGO, disk_ro_show, NULL);
 static DEVICE_ATTR(size, S_IRUGO, part_size_show, NULL);
+static DEVICE_ATTR(alignment_offset, S_IRUGO, disk_alignment_offset_show, NULL);
 static DEVICE_ATTR(capability, S_IRUGO, disk_capability_show, NULL);
 static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL);
 #ifdef CONFIG_FAIL_MAKE_REQUEST
@@ -875,6 +885,7 @@ static struct attribute *disk_attrs[] = {
 	&dev_attr_removable.attr,
 	&dev_attr_ro.attr,
 	&dev_attr_size.attr,
+	&dev_attr_alignment_offset.attr,
 	&dev_attr_capability.attr,
 	&dev_attr_stat.attr,
 #ifdef CONFIG_FAIL_MAKE_REQUEST
diff --git a/block/ioctl.c b/block/ioctl.c
index ad474d4bbcc..500e4c73cc5 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -152,10 +152,10 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start,
 		bio->bi_private = &wait;
 		bio->bi_sector = start;
 
-		if (len > q->max_hw_sectors) {
-			bio->bi_size = q->max_hw_sectors << 9;
-			len -= q->max_hw_sectors;
-			start += q->max_hw_sectors;
+		if (len > queue_max_hw_sectors(q)) {
+			bio->bi_size = queue_max_hw_sectors(q) << 9;
+			len -= queue_max_hw_sectors(q);
+			start += queue_max_hw_sectors(q);
 		} else {
 			bio->bi_size = len << 9;
 			len = 0;
@@ -311,9 +311,9 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 	case BLKBSZGET: /* get the logical block size (cf. BLKSSZGET) */
 		return put_int(arg, block_size(bdev));
 	case BLKSSZGET: /* get block device hardware sector size */
-		return put_int(arg, bdev_hardsect_size(bdev));
+		return put_int(arg, bdev_logical_block_size(bdev));
 	case BLKSECTGET:
-		return put_ushort(arg, bdev_get_queue(bdev)->max_sectors);
+		return put_ushort(arg, queue_max_sectors(bdev_get_queue(bdev)));
 	case BLKRASET:
 	case BLKFRASET:
 		if(!capable(CAP_SYS_ADMIN))
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 82a0ca2f672..5f8e798ede4 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -75,7 +75,7 @@ static int sg_set_timeout(struct request_queue *q, int __user *p)
 
 static int sg_get_reserved_size(struct request_queue *q, int __user *p)
 {
-	unsigned val = min(q->sg_reserved_size, q->max_sectors << 9);
+	unsigned val = min(q->sg_reserved_size, queue_max_sectors(q) << 9);
 
 	return put_user(val, p);
 }
@@ -89,8 +89,8 @@ static int sg_set_reserved_size(struct request_queue *q, int __user *p)
 
 	if (size < 0)
 		return -EINVAL;
-	if (size > (q->max_sectors << 9))
-		size = q->max_sectors << 9;
+	if (size > (queue_max_sectors(q) << 9))
+		size = queue_max_sectors(q) << 9;
 
 	q->sg_reserved_size = size;
 	return 0;
@@ -230,7 +230,7 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
 	hdr->info = 0;
 	if (hdr->masked_status || hdr->host_status || hdr->driver_status)
 		hdr->info |= SG_INFO_CHECK;
-	hdr->resid = rq->data_len;
+	hdr->resid = rq->resid_len;
 	hdr->sb_len_wr = 0;
 
 	if (rq->sense_len && hdr->sbp) {
@@ -264,7 +264,7 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
 	if (hdr->cmd_len > BLK_MAX_CDB)
 		return -EINVAL;
 
-	if (hdr->dxfer_len > (q->max_hw_sectors << 9))
+	if (hdr->dxfer_len > (queue_max_hw_sectors(q) << 9))
 		return -EIO;
 
 	if (hdr->dxfer_len)
@@ -500,9 +500,6 @@ static int __blk_send_generic(struct request_queue *q, struct gendisk *bd_disk,
 
 	rq = blk_get_request(q, WRITE, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
-	rq->data = NULL;
-	rq->data_len = 0;
-	rq->extra_len = 0;
 	rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
 	rq->cmd[0] = cmd;
 	rq->cmd[4] = data;
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 74d0e622a51..4dfdd03e708 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -241,6 +241,11 @@ config CRYPTO_XTS
 	  key size 256, 384 or 512 bits. This implementation currently
 	  can't handle a sectorsize which is not a multiple of 16 bytes.
 
+config CRYPTO_FPU
+	tristate
+	select CRYPTO_BLKCIPHER
+	select CRYPTO_MANAGER
+
 comment "Hash modes"
 
 config CRYPTO_HMAC
@@ -486,6 +491,7 @@ config CRYPTO_AES_NI_INTEL
 	select CRYPTO_AES_X86_64
 	select CRYPTO_CRYPTD
 	select CRYPTO_ALGAPI
+	select CRYPTO_FPU
 	help
 	  Use Intel AES-NI instructions for AES algorithm.
 
@@ -505,6 +511,10 @@ config CRYPTO_AES_NI_INTEL
 
 	  See <http://csrc.nist.gov/encryption/aes/> for more information.
 
+	  In addition to AES cipher algorithm support, the
+	  acceleration for some popular block cipher mode is supported
+	  too, including ECB, CBC, CTR, LRW, PCBC, XTS.
+
 config CRYPTO_ANUBIS
 	tristate "Anubis cipher algorithm"
 	select CRYPTO_ALGAPI
diff --git a/crypto/ahash.c b/crypto/ahash.c
index b2d1ee32cfe..f3476374f76 100644
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -82,10 +82,11 @@ int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err)
 	if (err)
 		return err;
 
-	walk->offset = 0;
-
-	if (nbytes)
+	if (nbytes) {
+		walk->offset = 0;
+		walk->pg++;
 		return hash_walk_next(walk);
+	}
 
 	if (!walk->total)
 		return 0;
diff --git a/crypto/algboss.c b/crypto/algboss.c
index 6906f92aeac..9908dd830c2 100644
--- a/crypto/algboss.c
+++ b/crypto/algboss.c
@@ -280,29 +280,13 @@ static struct notifier_block cryptomgr_notifier = {
 
 static int __init cryptomgr_init(void)
 {
-	int err;
-
-	err = testmgr_init();
-	if (err)
-		return err;
-
-	err = crypto_register_notifier(&cryptomgr_notifier);
-	if (err)
-		goto free_testmgr;
-
-	return 0;
-
-free_testmgr:
-	testmgr_exit();
-	return err;
+	return crypto_register_notifier(&cryptomgr_notifier);
 }
 
 static void __exit cryptomgr_exit(void)
 {
 	int err = crypto_unregister_notifier(&cryptomgr_notifier);
 	BUG_ON(err);
-
-	testmgr_exit();
 }
 
 subsys_initcall(cryptomgr_init);
diff --git a/crypto/api.c b/crypto/api.c
index 314dab96840..d5944f92b41 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -217,13 +217,11 @@ struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask)
 
 	alg = crypto_alg_lookup(name, type, mask);
 	if (!alg) {
-		char tmp[CRYPTO_MAX_ALG_NAME];
+		request_module("%s", name);
 
-		request_module(name);
-
-		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
-		    snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
-			request_module(tmp);
+		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
+		      CRYPTO_ALG_NEED_FALLBACK))
+			request_module("%s-all", name);
 
 		alg = crypto_alg_lookup(name, type, mask);
 	}
@@ -579,20 +577,17 @@ EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
 void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm)
 {
 	struct crypto_alg *alg;
-	int size;
 
 	if (unlikely(!mem))
 		return;
 
 	alg = tfm->__crt_alg;
-	size = ksize(mem);
 
 	if (!tfm->exit && alg->cra_exit)
 		alg->cra_exit(tfm);
 	crypto_exit_ops(tfm);
 	crypto_mod_put(alg);
-	memset(mem, 0, size);
-	kfree(mem);
+	kzfree(mem);
 }
 EXPORT_SYMBOL_GPL(crypto_destroy_tfm);
 
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index d14b22658d7..ae5fa99d5d3 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -586,20 +586,24 @@ struct cryptd_ablkcipher *cryptd_alloc_ablkcipher(const char *alg_name,
 						  u32 type, u32 mask)
 {
 	char cryptd_alg_name[CRYPTO_MAX_ALG_NAME];
-	struct crypto_ablkcipher *tfm;
+	struct crypto_tfm *tfm;
 
 	if (snprintf(cryptd_alg_name, CRYPTO_MAX_ALG_NAME,
 		     "cryptd(%s)", alg_name) >= CRYPTO_MAX_ALG_NAME)
 		return ERR_PTR(-EINVAL);
-	tfm = crypto_alloc_ablkcipher(cryptd_alg_name, type, mask);
+	type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV);
+	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
+	mask &= ~CRYPTO_ALG_TYPE_MASK;
+	mask |= (CRYPTO_ALG_GENIV | CRYPTO_ALG_TYPE_BLKCIPHER_MASK);
+	tfm = crypto_alloc_base(cryptd_alg_name, type, mask);
 	if (IS_ERR(tfm))
 		return ERR_CAST(tfm);
-	if (crypto_ablkcipher_tfm(tfm)->__crt_alg->cra_module != THIS_MODULE) {
-		crypto_free_ablkcipher(tfm);
+	if (tfm->__crt_alg->cra_module != THIS_MODULE) {
+		crypto_free_tfm(tfm);
 		return ERR_PTR(-EINVAL);
 	}
 
-	return __cryptd_ablkcipher_cast(tfm);
+	return __cryptd_ablkcipher_cast(__crypto_ablkcipher_cast(tfm));
 }
 EXPORT_SYMBOL_GPL(cryptd_alloc_ablkcipher);
 
diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c
index 2a342c8e52b..3ca3b669d5d 100644
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -153,7 +153,8 @@ static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req)
 	if (err)
 		goto out;
 
-	eseqiv_complete2(req);
+	if (giv != req->giv)
+		eseqiv_complete2(req);
 
 out:
 	return err;
diff --git a/crypto/internal.h b/crypto/internal.h
index fc76e1f37fc..113579a82df 100644
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -121,9 +121,6 @@ int crypto_register_notifier(struct notifier_block *nb);
 int crypto_unregister_notifier(struct notifier_block *nb);
 int crypto_probing_notify(unsigned long val, void *v);
 
-int __init testmgr_init(void);
-void testmgr_exit(void);
-
 static inline void crypto_alg_put(struct crypto_alg *alg)
 {
 	if (atomic_dec_and_test(&alg->cra_refcnt) && alg->cra_destroy)
diff --git a/crypto/pcompress.c b/crypto/pcompress.c
index ca9a4af91ef..bcadc03726b 100644
--- a/crypto/pcompress.c
+++ b/crypto/pcompress.c
@@ -26,6 +26,7 @@
 #include <linux/string.h>
 
 #include <crypto/compress.h>
+#include <crypto/internal/compress.h>
 
 #include "internal.h"
 
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index c3c9124209a..d59ba5079d1 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -27,6 +27,7 @@
 #include <linux/timex.h>
 #include <linux/interrupt.h>
 #include "tcrypt.h"
+#include "internal.h"
 
 /*
  * Need slab memory for testing (size in number of pages).
@@ -396,16 +397,16 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 	struct scatterlist sg[TVMEMSIZE];
 	struct crypto_hash *tfm;
 	struct hash_desc desc;
-	char output[1024];
+	static char output[1024];
 	int i;
 	int ret;
 
-	printk("\ntesting speed of %s\n", algo);
+	printk(KERN_INFO "\ntesting speed of %s\n", algo);
 
 	tfm = crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC);
 
 	if (IS_ERR(tfm)) {
-		printk("failed to load transform for %s: %ld\n", algo,
+		printk(KERN_ERR "failed to load transform for %s: %ld\n", algo,
 		       PTR_ERR(tfm));
 		return;
 	}
@@ -414,7 +415,7 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 	desc.flags = 0;
 
 	if (crypto_hash_digestsize(tfm) > sizeof(output)) {
-		printk("digestsize(%u) > outputbuffer(%zu)\n",
+		printk(KERN_ERR "digestsize(%u) > outputbuffer(%zu)\n",
 		       crypto_hash_digestsize(tfm), sizeof(output));
 		goto out;
 	}
@@ -427,12 +428,14 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 
 	for (i = 0; speed[i].blen != 0; i++) {
 		if (speed[i].blen > TVMEMSIZE * PAGE_SIZE) {
-			printk("template (%u) too big for tvmem (%lu)\n",
+			printk(KERN_ERR
+			       "template (%u) too big for tvmem (%lu)\n",
 			       speed[i].blen, TVMEMSIZE * PAGE_SIZE);
 			goto out;
 		}
 
-		printk("test%3u (%5u byte blocks,%5u bytes per update,%4u updates): ",
+		printk(KERN_INFO "test%3u "
+		       "(%5u byte blocks,%5u bytes per update,%4u updates): ",
 		       i, speed[i].blen, speed[i].plen, speed[i].blen / speed[i].plen);
 
 		if (sec)
@@ -443,7 +446,7 @@ static void test_hash_speed(const char *algo, unsigned int sec,
 					       speed[i].plen, output);
 
 		if (ret) {
-			printk("hashing failed ret=%d\n", ret);
+			printk(KERN_ERR "hashing failed ret=%d\n", ret);
 			break;
 		}
 	}
@@ -466,239 +469,255 @@ static void test_available(void)
 
 static inline int tcrypt_test(const char *alg)
 {
-	return alg_test(alg, alg, 0, 0);
+	int ret;
+
+	ret = alg_test(alg, alg, 0, 0);
+	/* non-fips algs return -EINVAL in fips mode */
+	if (fips_enabled && ret == -EINVAL)
+		ret = 0;
+	return ret;
 }
 
-static void do_test(int m)
+static int do_test(int m)
 {
 	int i;
+	int ret = 0;
 
 	switch (m) {
 	case 0:
 		for (i = 1; i < 200; i++)
-			do_test(i);
+			ret += do_test(i);
 		break;
 
 	case 1:
-		tcrypt_test("md5");
+		ret += tcrypt_test("md5");
 		break;
 
 	case 2:
-		tcrypt_test("sha1");
+		ret += tcrypt_test("sha1");
 		break;
 
 	case 3:
-		tcrypt_test("ecb(des)");
-		tcrypt_test("cbc(des)");
+		ret += tcrypt_test("ecb(des)");
+		ret += tcrypt_test("cbc(des)");
 		break;
 
 	case 4:
-		tcrypt_test("ecb(des3_ede)");
-		tcrypt_test("cbc(des3_ede)");
+		ret += tcrypt_test("ecb(des3_ede)");
+		ret += tcrypt_test("cbc(des3_ede)");
 		break;
 
 	case 5:
-		tcrypt_test("md4");
+		ret += tcrypt_test("md4");
 		break;
 
 	case 6:
-		tcrypt_test("sha256");
+		ret += tcrypt_test("sha256");
 		break;
 
 	case 7:
-		tcrypt_test("ecb(blowfish)");
-		tcrypt_test("cbc(blowfish)");
+		ret += tcrypt_test("ecb(blowfish)");
+		ret += tcrypt_test("cbc(blowfish)");
 		break;
 
 	case 8:
-		tcrypt_test("ecb(twofish)");
-		tcrypt_test("cbc(twofish)");
+		ret += tcrypt_test("ecb(twofish)");
+		ret += tcrypt_test("cbc(twofish)");
 		break;
 
 	case 9:
-		tcrypt_test("ecb(serpent)");
+		ret += tcrypt_test("ecb(serpent)");
 		break;
 
 	case 10:
-		tcrypt_test("ecb(aes)");
-		tcrypt_test("cbc(aes)");
-		tcrypt_test("lrw(aes)");
-		tcrypt_test("xts(aes)");
-		tcrypt_test("rfc3686(ctr(aes))");
+		ret += tcrypt_test("ecb(aes)");
+		ret += tcrypt_test("cbc(aes)");
+		ret += tcrypt_test("lrw(aes)");
+		ret += tcrypt_test("xts(aes)");
+		ret += tcrypt_test("ctr(aes)");
+		ret += tcrypt_test("rfc3686(ctr(aes))");
 		break;
 
 	case 11:
-		tcrypt_test("sha384");
+		ret += tcrypt_test("sha384");
 		break;
 
 	case 12:
-		tcrypt_test("sha512");
+		ret += tcrypt_test("sha512");
 		break;
 
 	case 13:
-		tcrypt_test("deflate");
+		ret += tcrypt_test("deflate");
 		break;
 
 	case 14:
-		tcrypt_test("ecb(cast5)");
+		ret += tcrypt_test("ecb(cast5)");
 		break;
 
 	case 15:
-		tcrypt_test("ecb(cast6)");
+		ret += tcrypt_test("ecb(cast6)");
 		break;
 
 	case 16:
-		tcrypt_test("ecb(arc4)");
+		ret += tcrypt_test("ecb(arc4)");
 		break;
 
 	case 17:
-		tcrypt_test("michael_mic");
+		ret += tcrypt_test("michael_mic");
 		break;
 
 	case 18:
-		tcrypt_test("crc32c");
+		ret += tcrypt_test("crc32c");
 		break;
 
 	case 19:
-		tcrypt_test("ecb(tea)");
+		ret += tcrypt_test("ecb(tea)");
 		break;
 
 	case 20:
-		tcrypt_test("ecb(xtea)");
+		ret += tcrypt_test("ecb(xtea)");
 		break;
 
 	case 21:
-		tcrypt_test("ecb(khazad)");
+		ret += tcrypt_test("ecb(khazad)");
 		break;
 
 	case 22:
-		tcrypt_test("wp512");
+		ret += tcrypt_test("wp512");
 		break;
 
 	case 23:
-		tcrypt_test("wp384");
+		ret += tcrypt_test("wp384");
 		break;
 
 	case 24:
-		tcrypt_test("wp256");
+		ret += tcrypt_test("wp256");
 		break;
 
 	case 25:
-		tcrypt_test("ecb(tnepres)");
+		ret += tcrypt_test("ecb(tnepres)");
 		break;
 
 	case 26:
-		tcrypt_test("ecb(anubis)");
-		tcrypt_test("cbc(anubis)");
+		ret += tcrypt_test("ecb(anubis)");
+		ret += tcrypt_test("cbc(anubis)");
 		break;
 
 	case 27:
-		tcrypt_test("tgr192");
+		ret += tcrypt_test("tgr192");
 		break;
 
 	case 28:
 
-		tcrypt_test("tgr160");
+		ret += tcrypt_test("tgr160");
 		break;
 
 	case 29:
-		tcrypt_test("tgr128");
+		ret += tcrypt_test("tgr128");
 		break;
 
 	case 30:
-		tcrypt_test("ecb(xeta)");
+		ret += tcrypt_test("ecb(xeta)");
 		break;
 
 	case 31:
-		tcrypt_test("pcbc(fcrypt)");
+		ret += tcrypt_test("pcbc(fcrypt)");
 		break;
 
 	case 32:
-		tcrypt_test("ecb(camellia)");
-		tcrypt_test("cbc(camellia)");
+		ret += tcrypt_test("ecb(camellia)");
+		ret += tcrypt_test("cbc(camellia)");
 		break;
 	case 33:
-		tcrypt_test("sha224");
+		ret += tcrypt_test("sha224");
 		break;
 
 	case 34:
-		tcrypt_test("salsa20");
+		ret += tcrypt_test("salsa20");
 		break;
 
 	case 35:
-		tcrypt_test("gcm(aes)");
+		ret += tcrypt_test("gcm(aes)");
 		break;
 
 	case 36:
-		tcrypt_test("lzo");
+		ret += tcrypt_test("lzo");
 		break;
 
 	case 37:
-		tcrypt_test("ccm(aes)");
+		ret += tcrypt_test("ccm(aes)");
 		break;
 
 	case 38:
-		tcrypt_test("cts(cbc(aes))");
+		ret += tcrypt_test("cts(cbc(aes))");
 		break;
 
         case 39:
-		tcrypt_test("rmd128");
+		ret += tcrypt_test("rmd128");
 		break;
 
         case 40:
-		tcrypt_test("rmd160");
+		ret += tcrypt_test("rmd160");
 		break;
 
 	case 41:
-		tcrypt_test("rmd256");
+		ret += tcrypt_test("rmd256");
 		break;
 
 	case 42:
-		tcrypt_test("rmd320");
+		ret += tcrypt_test("rmd320");
 		break;
 
 	case 43:
-		tcrypt_test("ecb(seed)");
+		ret += tcrypt_test("ecb(seed)");
 		break;
 
 	case 44:
-		tcrypt_test("zlib");
+		ret += tcrypt_test("zlib");
+		break;
+
+	case 45:
+		ret += tcrypt_test("rfc4309(ccm(aes))");
 		break;
 
 	case 100:
-		tcrypt_test("hmac(md5)");
+		ret += tcrypt_test("hmac(md5)");
 		break;
 
 	case 101:
-		tcrypt_test("hmac(sha1)");
+		ret += tcrypt_test("hmac(sha1)");
 		break;
 
 	case 102:
-		tcrypt_test("hmac(sha256)");
+		ret += tcrypt_test("hmac(sha256)");
 		break;
 
 	case 103:
-		tcrypt_test("hmac(sha384)");
+		ret += tcrypt_test("hmac(sha384)");
 		break;
 
 	case 104:
-		tcrypt_test("hmac(sha512)");
+		ret += tcrypt_test("hmac(sha512)");
 		break;
 
 	case 105:
-		tcrypt_test("hmac(sha224)");
+		ret += tcrypt_test("hmac(sha224)");
 		break;
 
 	case 106:
-		tcrypt_test("xcbc(aes)");
+		ret += tcrypt_test("xcbc(aes)");
 		break;
 
 	case 107:
-		tcrypt_test("hmac(rmd128)");
+		ret += tcrypt_test("hmac(rmd128)");
 		break;
 
 	case 108:
-		tcrypt_test("hmac(rmd160)");
+		ret += tcrypt_test("hmac(rmd160)");
+		break;
+
+	case 150:
+		ret += tcrypt_test("ansi_cprng");
 		break;
 
 	case 200:
@@ -862,6 +881,8 @@ static void do_test(int m)
 		test_available();
 		break;
 	}
+
+	return ret;
 }
 
 static int __init tcrypt_mod_init(void)
@@ -875,15 +896,21 @@ static int __init tcrypt_mod_init(void)
 			goto err_free_tv;
 	}
 
-	do_test(mode);
+	err = do_test(mode);
+	if (err) {
+		printk(KERN_ERR "tcrypt: one or more tests failed!\n");
+		goto err_free_tv;
+	}
 
-	/* We intentionaly return -EAGAIN to prevent keeping
-	 * the module. It does all its work from init()
-	 * and doesn't offer any runtime functionality 
+	/* We intentionaly return -EAGAIN to prevent keeping the module,
+	 * unless we're running in fips mode. It does all its work from
+	 * init() and doesn't offer any runtime functionality, but in
+	 * the fips case, checking for a successful load is helpful.
 	 * => we don't need it in the memory, do we?
 	 *                                        -- mludvig
 	 */
-	err = -EAGAIN;
+	if (!fips_enabled)
+		err = -EAGAIN;
 
 err_free_tv:
 	for (i = 0; i < TVMEMSIZE && tvmem[i]; i++)
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index b50c3c6b17a..e9e9d84293b 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -19,6 +19,7 @@
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <crypto/rng.h>
 
 #include "internal.h"
 #include "testmgr.h"
@@ -84,10 +85,16 @@ struct hash_test_suite {
 	unsigned int count;
 };
 
+struct cprng_test_suite {
+	struct cprng_testvec *vecs;
+	unsigned int count;
+};
+
 struct alg_test_desc {
 	const char *alg;
 	int (*test)(const struct alg_test_desc *desc, const char *driver,
 		    u32 type, u32 mask);
+	int fips_allowed;	/* set if alg is allowed in fips mode */
 
 	union {
 		struct aead_test_suite aead;
@@ -95,14 +102,12 @@ struct alg_test_desc {
 		struct comp_test_suite comp;
 		struct pcomp_test_suite pcomp;
 		struct hash_test_suite hash;
+		struct cprng_test_suite cprng;
 	} suite;
 };
 
 static unsigned int IDX[8] = { IDX1, IDX2, IDX3, IDX4, IDX5, IDX6, IDX7, IDX8 };
 
-static char *xbuf[XBUFSIZE];
-static char *axbuf[XBUFSIZE];
-
 static void hexdump(unsigned char *buf, unsigned int len)
 {
 	print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET,
@@ -121,6 +126,33 @@ static void tcrypt_complete(struct crypto_async_request *req, int err)
 	complete(&res->completion);
 }
 
+static int testmgr_alloc_buf(char *buf[XBUFSIZE])
+{
+	int i;
+
+	for (i = 0; i < XBUFSIZE; i++) {
+		buf[i] = (void *)__get_free_page(GFP_KERNEL);
+		if (!buf[i])
+			goto err_free_buf;
+	}
+
+	return 0;
+
+err_free_buf:
+	while (i-- > 0)
+		free_page((unsigned long)buf[i]);
+
+	return -ENOMEM;
+}
+
+static void testmgr_free_buf(char *buf[XBUFSIZE])
+{
+	int i;
+
+	for (i = 0; i < XBUFSIZE; i++)
+		free_page((unsigned long)buf[i]);
+}
+
 static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 		     unsigned int tcount)
 {
@@ -130,8 +162,12 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 	char result[64];
 	struct ahash_request *req;
 	struct tcrypt_result tresult;
-	int ret;
 	void *hash_buff;
+	char *xbuf[XBUFSIZE];
+	int ret = -ENOMEM;
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_nobuf;
 
 	init_completion(&tresult.completion);
 
@@ -139,17 +175,25 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 	if (!req) {
 		printk(KERN_ERR "alg: hash: Failed to allocate request for "
 		       "%s\n", algo);
-		ret = -ENOMEM;
 		goto out_noreq;
 	}
 	ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
 				   tcrypt_complete, &tresult);
 
+	j = 0;
 	for (i = 0; i < tcount; i++) {
+		if (template[i].np)
+			continue;
+
+		j++;
 		memset(result, 0, 64);
 
 		hash_buff = xbuf[0];
 
+		ret = -EINVAL;
+		if (WARN_ON(template[i].psize > PAGE_SIZE))
+			goto out;
+
 		memcpy(hash_buff, template[i].plaintext, template[i].psize);
 		sg_init_one(&sg[0], hash_buff, template[i].psize);
 
@@ -159,7 +203,7 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 						  template[i].ksize);
 			if (ret) {
 				printk(KERN_ERR "alg: hash: setkey failed on "
-				       "test %d for %s: ret=%d\n", i + 1, algo,
+				       "test %d for %s: ret=%d\n", j, algo,
 				       -ret);
 				goto out;
 			}
@@ -181,14 +225,14 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 			/* fall through */
 		default:
 			printk(KERN_ERR "alg: hash: digest failed on test %d "
-			       "for %s: ret=%d\n", i + 1, algo, -ret);
+			       "for %s: ret=%d\n", j, algo, -ret);
 			goto out;
 		}
 
 		if (memcmp(result, template[i].digest,
 			   crypto_ahash_digestsize(tfm))) {
 			printk(KERN_ERR "alg: hash: Test %d failed for %s\n",
-			       i + 1, algo);
+			       j, algo);
 			hexdump(result, crypto_ahash_digestsize(tfm));
 			ret = -EINVAL;
 			goto out;
@@ -203,7 +247,11 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 
 			temp = 0;
 			sg_init_table(sg, template[i].np);
+			ret = -EINVAL;
 			for (k = 0; k < template[i].np; k++) {
+				if (WARN_ON(offset_in_page(IDX[k]) +
+					    template[i].tap[k] > PAGE_SIZE))
+					goto out;
 				sg_set_buf(&sg[k],
 					   memcpy(xbuf[IDX[k] >> PAGE_SHIFT] +
 						  offset_in_page(IDX[k]),
@@ -265,6 +313,8 @@ static int test_hash(struct crypto_ahash *tfm, struct hash_testvec *template,
 out:
 	ahash_request_free(req);
 out_noreq:
+	testmgr_free_buf(xbuf);
+out_nobuf:
 	return ret;
 }
 
@@ -273,7 +323,7 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 {
 	const char *algo = crypto_tfm_alg_driver_name(crypto_aead_tfm(tfm));
 	unsigned int i, j, k, n, temp;
-	int ret = 0;
+	int ret = -ENOMEM;
 	char *q;
 	char *key;
 	struct aead_request *req;
@@ -285,6 +335,13 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 	void *input;
 	void *assoc;
 	char iv[MAX_IVLEN];
+	char *xbuf[XBUFSIZE];
+	char *axbuf[XBUFSIZE];
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_noxbuf;
+	if (testmgr_alloc_buf(axbuf))
+		goto out_noaxbuf;
 
 	if (enc == ENCRYPT)
 		e = "encryption";
@@ -297,7 +354,6 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 	if (!req) {
 		printk(KERN_ERR "alg: aead: Failed to allocate request for "
 		       "%s\n", algo);
-		ret = -ENOMEM;
 		goto out;
 	}
 
@@ -314,6 +370,11 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 			input = xbuf[0];
 			assoc = axbuf[0];
 
+			ret = -EINVAL;
+			if (WARN_ON(template[i].ilen > PAGE_SIZE ||
+				    template[i].alen > PAGE_SIZE))
+				goto out;
+
 			memcpy(input, template[i].input, template[i].ilen);
 			memcpy(assoc, template[i].assoc, template[i].alen);
 			if (template[i].iv)
@@ -363,6 +424,16 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 
 			switch (ret) {
 			case 0:
+				if (template[i].novrfy) {
+					/* verification was supposed to fail */
+					printk(KERN_ERR "alg: aead: %s failed "
+					       "on test %d for %s: ret was 0, "
+					       "expected -EBADMSG\n",
+					       e, j, algo);
+					/* so really, we got a bad message */
+					ret = -EBADMSG;
+					goto out;
+				}
 				break;
 			case -EINPROGRESS:
 			case -EBUSY:
@@ -372,6 +443,10 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 					INIT_COMPLETION(result.completion);
 					break;
 				}
+			case -EBADMSG:
+				if (template[i].novrfy)
+					/* verification failure was expected */
+					continue;
 				/* fall through */
 			default:
 				printk(KERN_ERR "alg: aead: %s failed on test "
@@ -459,7 +534,11 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 			}
 
 			sg_init_table(asg, template[i].anp);
+			ret = -EINVAL;
 			for (k = 0, temp = 0; k < template[i].anp; k++) {
+				if (WARN_ON(offset_in_page(IDX[k]) +
+					    template[i].atap[k] > PAGE_SIZE))
+					goto out;
 				sg_set_buf(&asg[k],
 					   memcpy(axbuf[IDX[k] >> PAGE_SHIFT] +
 						  offset_in_page(IDX[k]),
@@ -481,6 +560,16 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 
 			switch (ret) {
 			case 0:
+				if (template[i].novrfy) {
+					/* verification was supposed to fail */
+					printk(KERN_ERR "alg: aead: %s failed "
+					       "on chunk test %d for %s: ret "
+					       "was 0, expected -EBADMSG\n",
+					       e, j, algo);
+					/* so really, we got a bad message */
+					ret = -EBADMSG;
+					goto out;
+				}
 				break;
 			case -EINPROGRESS:
 			case -EBUSY:
@@ -490,6 +579,10 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 					INIT_COMPLETION(result.completion);
 					break;
 				}
+			case -EBADMSG:
+				if (template[i].novrfy)
+					/* verification failure was expected */
+					continue;
 				/* fall through */
 			default:
 				printk(KERN_ERR "alg: aead: %s failed on "
@@ -546,6 +639,10 @@ static int test_aead(struct crypto_aead *tfm, int enc,
 
 out:
 	aead_request_free(req);
+	testmgr_free_buf(axbuf);
+out_noaxbuf:
+	testmgr_free_buf(xbuf);
+out_noxbuf:
 	return ret;
 }
 
@@ -554,10 +651,14 @@ static int test_cipher(struct crypto_cipher *tfm, int enc,
 {
 	const char *algo = crypto_tfm_alg_driver_name(crypto_cipher_tfm(tfm));
 	unsigned int i, j, k;
-	int ret;
 	char *q;
 	const char *e;
 	void *data;
+	char *xbuf[XBUFSIZE];
+	int ret = -ENOMEM;
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_nobuf;
 
 	if (enc == ENCRYPT)
 	        e = "encryption";
@@ -571,6 +672,10 @@ static int test_cipher(struct crypto_cipher *tfm, int enc,
 
 		j++;
 
+		ret = -EINVAL;
+		if (WARN_ON(template[i].ilen > PAGE_SIZE))
+			goto out;
+
 		data = xbuf[0];
 		memcpy(data, template[i].input, template[i].ilen);
 
@@ -611,6 +716,8 @@ static int test_cipher(struct crypto_cipher *tfm, int enc,
 	ret = 0;
 
 out:
+	testmgr_free_buf(xbuf);
+out_nobuf:
 	return ret;
 }
 
@@ -620,7 +727,6 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 	const char *algo =
 		crypto_tfm_alg_driver_name(crypto_ablkcipher_tfm(tfm));
 	unsigned int i, j, k, n, temp;
-	int ret;
 	char *q;
 	struct ablkcipher_request *req;
 	struct scatterlist sg[8];
@@ -628,6 +734,11 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 	struct tcrypt_result result;
 	void *data;
 	char iv[MAX_IVLEN];
+	char *xbuf[XBUFSIZE];
+	int ret = -ENOMEM;
+
+	if (testmgr_alloc_buf(xbuf))
+		goto out_nobuf;
 
 	if (enc == ENCRYPT)
 	        e = "encryption";
@@ -640,7 +751,6 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 	if (!req) {
 		printk(KERN_ERR "alg: skcipher: Failed to allocate request "
 		       "for %s\n", algo);
-		ret = -ENOMEM;
 		goto out;
 	}
 
@@ -657,6 +767,10 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 		if (!(template[i].np)) {
 			j++;
 
+			ret = -EINVAL;
+			if (WARN_ON(template[i].ilen > PAGE_SIZE))
+				goto out;
+
 			data = xbuf[0];
 			memcpy(data, template[i].input, template[i].ilen);
 
@@ -825,6 +939,8 @@ static int test_skcipher(struct crypto_ablkcipher *tfm, int enc,
 
 out:
 	ablkcipher_request_free(req);
+	testmgr_free_buf(xbuf);
+out_nobuf:
 	return ret;
 }
 
@@ -837,7 +953,8 @@ static int test_comp(struct crypto_comp *tfm, struct comp_testvec *ctemplate,
 	int ret;
 
 	for (i = 0; i < ctcount; i++) {
-		int ilen, dlen = COMP_BUF_SIZE;
+		int ilen;
+		unsigned int dlen = COMP_BUF_SIZE;
 
 		memset(result, 0, sizeof (result));
 
@@ -869,7 +986,8 @@ static int test_comp(struct crypto_comp *tfm, struct comp_testvec *ctemplate,
 	}
 
 	for (i = 0; i < dtcount; i++) {
-		int ilen, dlen = COMP_BUF_SIZE;
+		int ilen;
+		unsigned int dlen = COMP_BUF_SIZE;
 
 		memset(result, 0, sizeof (result));
 
@@ -914,24 +1032,25 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 	const char *algo = crypto_tfm_alg_driver_name(crypto_pcomp_tfm(tfm));
 	unsigned int i;
 	char result[COMP_BUF_SIZE];
-	int error;
+	int res;
 
 	for (i = 0; i < ctcount; i++) {
 		struct comp_request req;
+		unsigned int produced = 0;
 
-		error = crypto_compress_setup(tfm, ctemplate[i].params,
-					      ctemplate[i].paramsize);
-		if (error) {
+		res = crypto_compress_setup(tfm, ctemplate[i].params,
+					    ctemplate[i].paramsize);
+		if (res) {
 			pr_err("alg: pcomp: compression setup failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
-		error = crypto_compress_init(tfm);
-		if (error) {
+		res = crypto_compress_init(tfm);
+		if (res) {
 			pr_err("alg: pcomp: compression init failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
 		memset(result, 0, sizeof(result));
@@ -941,32 +1060,37 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 		req.next_out = result;
 		req.avail_out = ctemplate[i].outlen / 2;
 
-		error = crypto_compress_update(tfm, &req);
-		if (error && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_compress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: compression update failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Add remaining input data */
 		req.avail_in += (ctemplate[i].inlen + 1) / 2;
 
-		error = crypto_compress_update(tfm, &req);
-		if (error && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_compress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: compression update failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Provide remaining output space */
 		req.avail_out += COMP_BUF_SIZE - ctemplate[i].outlen / 2;
 
-		error = crypto_compress_final(tfm, &req);
-		if (error) {
+		res = crypto_compress_final(tfm, &req);
+		if (res < 0) {
 			pr_err("alg: pcomp: compression final failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		produced += res;
 
 		if (COMP_BUF_SIZE - req.avail_out != ctemplate[i].outlen) {
 			pr_err("alg: comp: Compression test %d failed for %s: "
@@ -976,6 +1100,13 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 			return -EINVAL;
 		}
 
+		if (produced != ctemplate[i].outlen) {
+			pr_err("alg: comp: Compression test %d failed for %s: "
+			       "returned len = %u (expected %d)\n", i + 1,
+			       algo, produced, ctemplate[i].outlen);
+			return -EINVAL;
+		}
+
 		if (memcmp(result, ctemplate[i].output, ctemplate[i].outlen)) {
 			pr_err("alg: pcomp: Compression test %d failed for "
 			       "%s\n", i + 1, algo);
@@ -986,21 +1117,21 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 
 	for (i = 0; i < dtcount; i++) {
 		struct comp_request req;
+		unsigned int produced = 0;
 
-		error = crypto_decompress_setup(tfm, dtemplate[i].params,
-						dtemplate[i].paramsize);
-		if (error) {
+		res = crypto_decompress_setup(tfm, dtemplate[i].params,
+					      dtemplate[i].paramsize);
+		if (res) {
 			pr_err("alg: pcomp: decompression setup failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
-		error = crypto_decompress_init(tfm);
-		if (error) {
+		res = crypto_decompress_init(tfm);
+		if (res) {
 			pr_err("alg: pcomp: decompression init failed on test "
-			       "%d for %s: error=%d\n", i + 1, algo, error);
-			return error;
+			       "%d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
 
 		memset(result, 0, sizeof(result));
@@ -1010,35 +1141,38 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 		req.next_out = result;
 		req.avail_out = dtemplate[i].outlen / 2;
 
-		error = crypto_decompress_update(tfm, &req);
-		if (error  && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_decompress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: decompression update failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Add remaining input data */
 		req.avail_in += (dtemplate[i].inlen + 1) / 2;
 
-		error = crypto_decompress_update(tfm, &req);
-		if (error  && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_decompress_update(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: decompression update failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		/* Provide remaining output space */
 		req.avail_out += COMP_BUF_SIZE - dtemplate[i].outlen / 2;
 
-		error = crypto_decompress_final(tfm, &req);
-		if (error  && (error != -EAGAIN || req.avail_in)) {
+		res = crypto_decompress_final(tfm, &req);
+		if (res < 0 && (res != -EAGAIN || req.avail_in)) {
 			pr_err("alg: pcomp: decompression final failed on "
-			       "test %d for %s: error=%d\n", i + 1, algo,
-			       error);
-			return error;
+			       "test %d for %s: error=%d\n", i + 1, algo, res);
+			return res;
 		}
+		if (res > 0)
+			produced += res;
 
 		if (COMP_BUF_SIZE - req.avail_out != dtemplate[i].outlen) {
 			pr_err("alg: comp: Decompression test %d failed for "
@@ -1048,6 +1182,13 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 			return -EINVAL;
 		}
 
+		if (produced != dtemplate[i].outlen) {
+			pr_err("alg: comp: Decompression test %d failed for "
+			       "%s: returned len = %u (expected %d)\n", i + 1,
+			       algo, produced, dtemplate[i].outlen);
+			return -EINVAL;
+		}
+
 		if (memcmp(result, dtemplate[i].output, dtemplate[i].outlen)) {
 			pr_err("alg: pcomp: Decompression test %d failed for "
 			       "%s\n", i + 1, algo);
@@ -1059,6 +1200,68 @@ static int test_pcomp(struct crypto_pcomp *tfm,
 	return 0;
 }
 
+
+static int test_cprng(struct crypto_rng *tfm, struct cprng_testvec *template,
+		      unsigned int tcount)
+{
+	const char *algo = crypto_tfm_alg_driver_name(crypto_rng_tfm(tfm));
+	int err, i, j, seedsize;
+	u8 *seed;
+	char result[32];
+
+	seedsize = crypto_rng_seedsize(tfm);
+
+	seed = kmalloc(seedsize, GFP_KERNEL);
+	if (!seed) {
+		printk(KERN_ERR "alg: cprng: Failed to allocate seed space "
+		       "for %s\n", algo);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < tcount; i++) {
+		memset(result, 0, 32);
+
+		memcpy(seed, template[i].v, template[i].vlen);
+		memcpy(seed + template[i].vlen, template[i].key,
+		       template[i].klen);
+		memcpy(seed + template[i].vlen + template[i].klen,
+		       template[i].dt, template[i].dtlen);
+
+		err = crypto_rng_reset(tfm, seed, seedsize);
+		if (err) {
+			printk(KERN_ERR "alg: cprng: Failed to reset rng "
+			       "for %s\n", algo);
+			goto out;
+		}
+
+		for (j = 0; j < template[i].loops; j++) {
+			err = crypto_rng_get_bytes(tfm, result,
+						   template[i].rlen);
+			if (err != template[i].rlen) {
+				printk(KERN_ERR "alg: cprng: Failed to obtain "
+				       "the correct amount of random data for "
+				       "%s (requested %d, got %d)\n", algo,
+				       template[i].rlen, err);
+				goto out;
+			}
+		}
+
+		err = memcmp(result, template[i].result,
+			     template[i].rlen);
+		if (err) {
+			printk(KERN_ERR "alg: cprng: Test %d failed for %s\n",
+			       i, algo);
+			hexdump(result, template[i].rlen);
+			err = -EINVAL;
+			goto out;
+		}
+	}
+
+out:
+	kfree(seed);
+	return err;
+}
+
 static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
 			 u32 type, u32 mask)
 {
@@ -1258,11 +1461,42 @@ out:
 	return err;
 }
 
+static int alg_test_cprng(const struct alg_test_desc *desc, const char *driver,
+			  u32 type, u32 mask)
+{
+	struct crypto_rng *rng;
+	int err;
+
+	rng = crypto_alloc_rng(driver, type, mask);
+	if (IS_ERR(rng)) {
+		printk(KERN_ERR "alg: cprng: Failed to load transform for %s: "
+		       "%ld\n", driver, PTR_ERR(rng));
+		return PTR_ERR(rng);
+	}
+
+	err = test_cprng(rng, desc->suite.cprng.vecs, desc->suite.cprng.count);
+
+	crypto_free_rng(rng);
+
+	return err;
+}
+
 /* Please keep this list sorted by algorithm name. */
 static const struct alg_test_desc alg_test_descs[] = {
 	{
+		.alg = "ansi_cprng",
+		.test = alg_test_cprng,
+		.fips_allowed = 1,
+		.suite = {
+			.cprng = {
+				.vecs = ansi_cprng_aes_tv_template,
+				.count = ANSI_CPRNG_AES_TEST_VECTORS
+			}
+		}
+	}, {
 		.alg = "cbc(aes)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1338,6 +1572,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "cbc(des3_ede)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1368,6 +1603,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ccm(aes)",
 		.test = alg_test_aead,
+		.fips_allowed = 1,
 		.suite = {
 			.aead = {
 				.enc = {
@@ -1383,6 +1619,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "crc32c",
 		.test = alg_test_crc32c,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = crc32c_tv_template,
@@ -1390,6 +1627,22 @@ static const struct alg_test_desc alg_test_descs[] = {
 			}
 		}
 	}, {
+		.alg = "ctr(aes)",
+		.test = alg_test_skcipher,
+		.fips_allowed = 1,
+		.suite = {
+			.cipher = {
+				.enc = {
+					.vecs = aes_ctr_enc_tv_template,
+					.count = AES_CTR_ENC_TEST_VECTORS
+				},
+				.dec = {
+					.vecs = aes_ctr_dec_tv_template,
+					.count = AES_CTR_DEC_TEST_VECTORS
+				}
+			}
+		}
+	}, {
 		.alg = "cts(cbc(aes))",
 		.test = alg_test_skcipher,
 		.suite = {
@@ -1422,6 +1675,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecb(aes)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1527,6 +1781,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecb(des)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1542,6 +1797,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "ecb(des3_ede)",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
@@ -1677,6 +1933,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "gcm(aes)",
 		.test = alg_test_aead,
+		.fips_allowed = 1,
 		.suite = {
 			.aead = {
 				.enc = {
@@ -1719,6 +1976,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha1)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha1_tv_template,
@@ -1728,6 +1986,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha224)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha224_tv_template,
@@ -1737,6 +1996,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha256)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha256_tv_template,
@@ -1746,6 +2006,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha384)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha384_tv_template,
@@ -1755,6 +2016,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "hmac(sha512)",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = hmac_sha512_tv_template,
@@ -1836,15 +2098,32 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "rfc3686(ctr(aes))",
 		.test = alg_test_skcipher,
+		.fips_allowed = 1,
 		.suite = {
 			.cipher = {
 				.enc = {
-					.vecs = aes_ctr_enc_tv_template,
-					.count = AES_CTR_ENC_TEST_VECTORS
+					.vecs = aes_ctr_rfc3686_enc_tv_template,
+					.count = AES_CTR_3686_ENC_TEST_VECTORS
 				},
 				.dec = {
-					.vecs = aes_ctr_dec_tv_template,
-					.count = AES_CTR_DEC_TEST_VECTORS
+					.vecs = aes_ctr_rfc3686_dec_tv_template,
+					.count = AES_CTR_3686_DEC_TEST_VECTORS
+				}
+			}
+		}
+	}, {
+		.alg = "rfc4309(ccm(aes))",
+		.test = alg_test_aead,
+		.fips_allowed = 1,
+		.suite = {
+			.aead = {
+				.enc = {
+					.vecs = aes_ccm_rfc4309_enc_tv_template,
+					.count = AES_CCM_4309_ENC_TEST_VECTORS
+				},
+				.dec = {
+					.vecs = aes_ccm_rfc4309_dec_tv_template,
+					.count = AES_CCM_4309_DEC_TEST_VECTORS
 				}
 			}
 		}
@@ -1898,6 +2177,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha1",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha1_tv_template,
@@ -1907,6 +2187,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha224",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha224_tv_template,
@@ -1916,6 +2197,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha256",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha256_tv_template,
@@ -1925,6 +2207,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha384",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha384_tv_template,
@@ -1934,6 +2217,7 @@ static const struct alg_test_desc alg_test_descs[] = {
 	}, {
 		.alg = "sha512",
 		.test = alg_test_hash,
+		.fips_allowed = 1,
 		.suite = {
 			.hash = {
 				.vecs = sha512_tv_template,
@@ -2077,60 +2361,36 @@ int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
 		if (i < 0)
 			goto notest;
 
-		return alg_test_cipher(alg_test_descs + i, driver, type, mask);
+		if (fips_enabled && !alg_test_descs[i].fips_allowed)
+			goto non_fips_alg;
+
+		rc = alg_test_cipher(alg_test_descs + i, driver, type, mask);
+		goto test_done;
 	}
 
 	i = alg_find_test(alg);
 	if (i < 0)
 		goto notest;
 
+	if (fips_enabled && !alg_test_descs[i].fips_allowed)
+		goto non_fips_alg;
+
 	rc = alg_test_descs[i].test(alg_test_descs + i, driver,
 				      type, mask);
+test_done:
 	if (fips_enabled && rc)
 		panic("%s: %s alg self test failed in fips mode!\n", driver, alg);
 
+	if (fips_enabled && !rc)
+		printk(KERN_INFO "alg: self-tests for %s (%s) passed\n",
+		       driver, alg);
+
 	return rc;
 
 notest:
 	printk(KERN_INFO "alg: No test for %s (%s)\n", alg, driver);
 	return 0;
+non_fips_alg:
+	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(alg_test);
-
-int __init testmgr_init(void)
-{
-	int i;
-
-	for (i = 0; i < XBUFSIZE; i++) {
-		xbuf[i] = (void *)__get_free_page(GFP_KERNEL);
-		if (!xbuf[i])
-			goto err_free_xbuf;
-	}
-
-	for (i = 0; i < XBUFSIZE; i++) {
-		axbuf[i] = (void *)__get_free_page(GFP_KERNEL);
-		if (!axbuf[i])
-			goto err_free_axbuf;
-	}
-
-	return 0;
-
-err_free_axbuf:
-	for (i = 0; i < XBUFSIZE && axbuf[i]; i++)
-		free_page((unsigned long)axbuf[i]);
-err_free_xbuf:
-	for (i = 0; i < XBUFSIZE && xbuf[i]; i++)
-		free_page((unsigned long)xbuf[i]);
-
-	return -ENOMEM;
-}
-
-void testmgr_exit(void)
-{
-	int i;
-
-	for (i = 0; i < XBUFSIZE; i++)
-		free_page((unsigned long)axbuf[i]);
-	for (i = 0; i < XBUFSIZE; i++)
-		free_page((unsigned long)xbuf[i]);
-}
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index 526f00a9c72..69316228fc1 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -62,6 +62,7 @@ struct aead_testvec {
 	int np;
 	int anp;
 	unsigned char fail;
+	unsigned char novrfy;	/* ccm dec verification failure expected */
 	unsigned char wk; /* weak key flag */
 	unsigned char klen;
 	unsigned short ilen;
@@ -69,6 +70,18 @@ struct aead_testvec {
 	unsigned short rlen;
 };
 
+struct cprng_testvec {
+	char *key;
+	char *dt;
+	char *v;
+	char *result;
+	unsigned char klen;
+	unsigned short dtlen;
+	unsigned short vlen;
+	unsigned short rlen;
+	unsigned short loops;
+};
+
 static char zeroed_string[48];
 
 /*
@@ -2841,12 +2854,16 @@ static struct cipher_testvec cast6_dec_tv_template[] = {
 #define AES_LRW_DEC_TEST_VECTORS 8
 #define AES_XTS_ENC_TEST_VECTORS 4
 #define AES_XTS_DEC_TEST_VECTORS 4
-#define AES_CTR_ENC_TEST_VECTORS 7
-#define AES_CTR_DEC_TEST_VECTORS 6
+#define AES_CTR_ENC_TEST_VECTORS 3
+#define AES_CTR_DEC_TEST_VECTORS 3
+#define AES_CTR_3686_ENC_TEST_VECTORS 7
+#define AES_CTR_3686_DEC_TEST_VECTORS 6
 #define AES_GCM_ENC_TEST_VECTORS 9
 #define AES_GCM_DEC_TEST_VECTORS 8
 #define AES_CCM_ENC_TEST_VECTORS 7
 #define AES_CCM_DEC_TEST_VECTORS 7
+#define AES_CCM_4309_ENC_TEST_VECTORS 7
+#define AES_CCM_4309_DEC_TEST_VECTORS 10
 
 static struct cipher_testvec aes_enc_tv_template[] = {
 	{ /* From FIPS-197 */
@@ -3983,6 +4000,164 @@ static struct cipher_testvec aes_xts_dec_tv_template[] = {
 
 
 static struct cipher_testvec aes_ctr_enc_tv_template[] = {
+	{ /* From NIST Special Publication 800-38A, Appendix F.5 */
+		.key	= "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+			  "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+		.klen	= 16,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ilen	= 64,
+		.result	= "\x87\x4d\x61\x91\xb6\x20\xe3\x26"
+			  "\x1b\xef\x68\x64\x99\x0d\xb6\xce"
+			  "\x98\x06\xf6\x6b\x79\x70\xfd\xff"
+			  "\x86\x17\x18\x7b\xb9\xff\xfd\xff"
+			  "\x5a\xe4\xdf\x3e\xdb\xd5\xd3\x5e"
+			  "\x5b\x4f\x09\x02\x0d\xb0\x3e\xab"
+			  "\x1e\x03\x1d\xda\x2f\xbe\x03\xd1"
+			  "\x79\x21\x70\xa0\xf3\x00\x9c\xee",
+		.rlen	= 64,
+	}, {
+		.key	= "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+			  "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+			  "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+		.klen	= 24,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ilen	= 64,
+		.result	= "\x1a\xbc\x93\x24\x17\x52\x1c\xa2"
+			  "\x4f\x2b\x04\x59\xfe\x7e\x6e\x0b"
+			  "\x09\x03\x39\xec\x0a\xa6\xfa\xef"
+			  "\xd5\xcc\xc2\xc6\xf4\xce\x8e\x94"
+			  "\x1e\x36\xb2\x6b\xd1\xeb\xc6\x70"
+			  "\xd1\xbd\x1d\x66\x56\x20\xab\xf7"
+			  "\x4f\x78\xa7\xf6\xd2\x98\x09\x58"
+			  "\x5a\x97\xda\xec\x58\xc6\xb0\x50",
+		.rlen	= 64,
+	}, {
+		.key	= "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+			  "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+			  "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+			  "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+		.klen	= 32,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.ilen	= 64,
+		.result	= "\x60\x1e\xc3\x13\x77\x57\x89\xa5"
+			  "\xb7\xa7\xf5\x04\xbb\xf3\xd2\x28"
+			  "\xf4\x43\xe3\xca\x4d\x62\xb5\x9a"
+			  "\xca\x84\xe9\x90\xca\xca\xf5\xc5"
+			  "\x2b\x09\x30\xda\xa2\x3d\xe9\x4c"
+			  "\xe8\x70\x17\xba\x2d\x84\x98\x8d"
+			  "\xdf\xc9\xc5\x8d\xb6\x7a\xad\xa6"
+			  "\x13\xc2\xdd\x08\x45\x79\x41\xa6",
+		.rlen	= 64,
+	}
+};
+
+static struct cipher_testvec aes_ctr_dec_tv_template[] = {
+	{ /* From NIST Special Publication 800-38A, Appendix F.5 */
+		.key	= "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+			  "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+		.klen	= 16,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x87\x4d\x61\x91\xb6\x20\xe3\x26"
+			  "\x1b\xef\x68\x64\x99\x0d\xb6\xce"
+			  "\x98\x06\xf6\x6b\x79\x70\xfd\xff"
+			  "\x86\x17\x18\x7b\xb9\xff\xfd\xff"
+			  "\x5a\xe4\xdf\x3e\xdb\xd5\xd3\x5e"
+			  "\x5b\x4f\x09\x02\x0d\xb0\x3e\xab"
+			  "\x1e\x03\x1d\xda\x2f\xbe\x03\xd1"
+			  "\x79\x21\x70\xa0\xf3\x00\x9c\xee",
+		.ilen	= 64,
+		.result	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.rlen	= 64,
+	}, {
+		.key	= "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+			  "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+			  "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+		.klen	= 24,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x1a\xbc\x93\x24\x17\x52\x1c\xa2"
+			  "\x4f\x2b\x04\x59\xfe\x7e\x6e\x0b"
+			  "\x09\x03\x39\xec\x0a\xa6\xfa\xef"
+			  "\xd5\xcc\xc2\xc6\xf4\xce\x8e\x94"
+			  "\x1e\x36\xb2\x6b\xd1\xeb\xc6\x70"
+			  "\xd1\xbd\x1d\x66\x56\x20\xab\xf7"
+			  "\x4f\x78\xa7\xf6\xd2\x98\x09\x58"
+			  "\x5a\x97\xda\xec\x58\xc6\xb0\x50",
+		.ilen	= 64,
+		.result	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.rlen	= 64,
+	}, {
+		.key	= "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+			  "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+			  "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+			  "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+		.klen	= 32,
+		.iv	= "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+			  "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+		.input	= "\x60\x1e\xc3\x13\x77\x57\x89\xa5"
+			  "\xb7\xa7\xf5\x04\xbb\xf3\xd2\x28"
+			  "\xf4\x43\xe3\xca\x4d\x62\xb5\x9a"
+			  "\xca\x84\xe9\x90\xca\xca\xf5\xc5"
+			  "\x2b\x09\x30\xda\xa2\x3d\xe9\x4c"
+			  "\xe8\x70\x17\xba\x2d\x84\x98\x8d"
+			  "\xdf\xc9\xc5\x8d\xb6\x7a\xad\xa6"
+			  "\x13\xc2\xdd\x08\x45\x79\x41\xa6",
+		.ilen	= 64,
+		.result	= "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+			  "\xe9\x3d\x7e\x11\x73\x93\x17\x2a"
+			  "\xae\x2d\x8a\x57\x1e\x03\xac\x9c"
+			  "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51"
+			  "\x30\xc8\x1c\x46\xa3\x5c\xe4\x11"
+			  "\xe5\xfb\xc1\x19\x1a\x0a\x52\xef"
+			  "\xf6\x9f\x24\x45\xdf\x4f\x9b\x17"
+			  "\xad\x2b\x41\x7b\xe6\x6c\x37\x10",
+		.rlen	= 64,
+	}
+};
+
+static struct cipher_testvec aes_ctr_rfc3686_enc_tv_template[] = {
 	{ /* From RFC 3686 */
 		.key	= "\xae\x68\x52\xf8\x12\x10\x67\xcc"
 			  "\x4b\xf7\xa5\x76\x55\x77\xf3\x9e"
@@ -5114,7 +5289,7 @@ static struct cipher_testvec aes_ctr_enc_tv_template[] = {
 	},
 };
 
-static struct cipher_testvec aes_ctr_dec_tv_template[] = {
+static struct cipher_testvec aes_ctr_rfc3686_dec_tv_template[] = {
 	{ /* From RFC 3686 */
 		.key	= "\xae\x68\x52\xf8\x12\x10\x67\xcc"
 			  "\x4b\xf7\xa5\x76\x55\x77\xf3\x9e"
@@ -5825,6 +6000,470 @@ static struct aead_testvec aes_ccm_dec_tv_template[] = {
 	},
 };
 
+/*
+ * rfc4309 refers to section 8 of rfc3610 for test vectors, but they all
+ * use a 13-byte nonce, we only support an 11-byte nonce. Similarly, all of
+ * Special Publication 800-38C's test vectors also use nonce lengths our
+ * implementation doesn't support. The following are taken from fips cavs
+ * fax files on hand at Red Hat.
+ *
+ * nb: actual key lengths are (klen - 3), the last 3 bytes are actually
+ * part of the nonce which combine w/the iv, but need to be input this way.
+ */
+static struct aead_testvec aes_ccm_rfc4309_enc_tv_template[] = {
+	{
+		.key	= "\x83\xac\x54\x66\xc2\xeb\xe5\x05"
+			  "\x2e\x01\xd1\xfc\x5d\x82\x66\x2e"
+			  "\x96\xac\x59",
+		.klen	= 19,
+		.iv	= "\x30\x07\xa1\xe2\xa2\xc7\x55\x24",
+		.alen	= 0,
+		.input	= "\x19\xc8\x81\xf6\xe9\x86\xff\x93"
+			  "\x0b\x78\x67\xe5\xbb\xb7\xfc\x6e"
+			  "\x83\x77\xb3\xa6\x0c\x8c\x9f\x9c"
+			  "\x35\x2e\xad\xe0\x62\xf9\x91\xa1",
+		.ilen	= 32,
+		.result	= "\xab\x6f\xe1\x69\x1d\x19\x99\xa8"
+			  "\x92\xa0\xc4\x6f\x7e\xe2\x8b\xb1"
+			  "\x70\xbb\x8c\xa6\x4c\x6e\x97\x8a"
+			  "\x57\x2b\xbe\x5d\x98\xa6\xb1\x32"
+			  "\xda\x24\xea\xd9\xa1\x39\x98\xfd"
+			  "\xa4\xbe\xd9\xf2\x1a\x6d\x22\xa8",
+		.rlen	= 48,
+	}, {
+		.key	= "\x1e\x2c\x7e\x01\x41\x9a\xef\xc0"
+			  "\x0d\x58\x96\x6e\x5c\xa2\x4b\xd3"
+			  "\x4f\xa3\x19",
+		.klen	= 19,
+		.iv	= "\xd3\x01\x5a\xd8\x30\x60\x15\x56",
+		.assoc	= "\xda\xe6\x28\x9c\x45\x2d\xfd\x63"
+			  "\x5e\xda\x4c\xb6\xe6\xfc\xf9\xb7"
+			  "\x0c\x56\xcb\xe4\xe0\x05\x7a\xe1"
+			  "\x0a\x63\x09\x78\xbc\x2c\x55\xde",
+		.alen	= 32,
+		.input	= "\x87\xa3\x36\xfd\x96\xb3\x93\x78"
+			  "\xa9\x28\x63\xba\x12\xa3\x14\x85"
+			  "\x57\x1e\x06\xc9\x7b\x21\xef\x76"
+			  "\x7f\x38\x7e\x8e\x29\xa4\x3e\x7e",
+		.ilen	= 32,
+		.result	= "\x8a\x1e\x11\xf0\x02\x6b\xe2\x19"
+			  "\xfc\x70\xc4\x6d\x8e\xb7\x99\xab"
+			  "\xc5\x4b\xa2\xac\xd3\xf3\x48\xff"
+			  "\x3b\xb5\xce\x53\xef\xde\xbb\x02"
+			  "\xa9\x86\x15\x6c\x13\xfe\xda\x0a"
+			  "\x22\xb8\x29\x3d\xd8\x39\x9a\x23",
+		.rlen	= 48,
+	}, {
+		.key	= "\xf4\x6b\xc2\x75\x62\xfe\xb4\xe1"
+			  "\xa3\xf0\xff\xdd\x4e\x4b\x12\x75"
+			  "\x53\x14\x73\x66\x8d\x88\xf6\x80"
+			  "\xa0\x20\x35",
+		.klen	= 27,
+		.iv	= "\x26\xf2\x21\x8d\x50\x20\xda\xe2",
+		.assoc	= "\x5b\x9e\x13\x67\x02\x5e\xef\xc1"
+			  "\x6c\xf9\xd7\x1e\x52\x8f\x7a\x47"
+			  "\xe9\xd4\xcf\x20\x14\x6e\xf0\x2d"
+			  "\xd8\x9e\x2b\x56\x10\x23\x56\xe7",
+		.alen	= 32,
+		.ilen	= 0,
+		.result	= "\x36\xea\x7a\x70\x08\xdc\x6a\xbc"
+			  "\xad\x0c\x7a\x63\xf6\x61\xfd\x9b",
+		.rlen	= 16,
+	}, {
+		.key	= "\x56\xdf\x5c\x8f\x26\x3f\x0e\x42"
+			  "\xef\x7a\xd3\xce\xfc\x84\x60\x62"
+			  "\xca\xb4\x40\xaf\x5f\xc9\xc9\x01"
+			  "\xd6\x3c\x8c",
+		.klen	= 27,
+		.iv	= "\x86\x84\xb6\xcd\xef\x09\x2e\x94",
+		.assoc	= "\x02\x65\x78\x3c\xe9\x21\x30\x91"
+			  "\xb1\xb9\xda\x76\x9a\x78\x6d\x95"
+			  "\xf2\x88\x32\xa3\xf2\x50\xcb\x4c"
+			  "\xe3\x00\x73\x69\x84\x69\x87\x79",
+		.alen	= 32,
+		.input	= "\x9f\xd2\x02\x4b\x52\x49\x31\x3c"
+			  "\x43\x69\x3a\x2d\x8e\x70\xad\x7e"
+			  "\xe0\xe5\x46\x09\x80\x89\x13\xb2"
+			  "\x8c\x8b\xd9\x3f\x86\xfb\xb5\x6b",
+		.ilen	= 32,
+		.result	= "\x39\xdf\x7c\x3c\x5a\x29\xb9\x62"
+			  "\x5d\x51\xc2\x16\xd8\xbd\x06\x9f"
+			  "\x9b\x6a\x09\x70\xc1\x51\x83\xc2"
+			  "\x66\x88\x1d\x4f\x9a\xda\xe0\x1e"
+			  "\xc7\x79\x11\x58\xe5\x6b\x20\x40"
+			  "\x7a\xea\x46\x42\x8b\xe4\x6f\xe1",
+		.rlen	= 48,
+	}, {
+		.key	= "\xe0\x8d\x99\x71\x60\xd7\x97\x1a"
+			  "\xbd\x01\x99\xd5\x8a\xdf\x71\x3a"
+			  "\xd3\xdf\x24\x4b\x5e\x3d\x4b\x4e"
+			  "\x30\x7a\xb9\xd8\x53\x0a\x5e\x2b"
+			  "\x1e\x29\x91",
+		.klen	= 35,
+		.iv	= "\xad\x8e\xc1\x53\x0a\xcf\x2d\xbe",
+		.assoc	= "\x19\xb6\x1f\x57\xc4\xf3\xf0\x8b"
+			  "\x78\x2b\x94\x02\x29\x0f\x42\x27"
+			  "\x6b\x75\xcb\x98\x34\x08\x7e\x79"
+			  "\xe4\x3e\x49\x0d\x84\x8b\x22\x87",
+		.alen	= 32,
+		.input	= "\xe1\xd9\xd8\x13\xeb\x3a\x75\x3f"
+			  "\x9d\xbd\x5f\x66\xbe\xdc\xbb\x66"
+			  "\xbf\x17\x99\x62\x4a\x39\x27\x1f"
+			  "\x1d\xdc\x24\xae\x19\x2f\x98\x4c",
+		.ilen	= 32,
+		.result	= "\x19\xb8\x61\x33\x45\x2b\x43\x96"
+			  "\x6f\x51\xd0\x20\x30\x7d\x9b\xc6"
+			  "\x26\x3d\xf8\xc9\x65\x16\xa8\x9f"
+			  "\xf0\x62\x17\x34\xf2\x1e\x8d\x75"
+			  "\x4e\x13\xcc\xc0\xc3\x2a\x54\x2d",
+		.rlen	= 40,
+	}, {
+		.key	= "\x7c\xc8\x18\x3b\x8d\x99\xe0\x7c"
+			  "\x45\x41\xb8\xbd\x5c\xa7\xc2\x32"
+			  "\x8a\xb8\x02\x59\xa4\xfe\xa9\x2c"
+			  "\x09\x75\x9a\x9b\x3c\x9b\x27\x39"
+			  "\xf9\xd9\x4e",
+		.klen	= 35,
+		.iv	= "\x63\xb5\x3d\x9d\x43\xf6\x1e\x50",
+		.assoc	= "\x57\xf5\x6b\x8b\x57\x5c\x3d\x3b"
+			  "\x13\x02\x01\x0c\x83\x4c\x96\x35"
+			  "\x8e\xd6\x39\xcf\x7d\x14\x9b\x94"
+			  "\xb0\x39\x36\xe6\x8f\x57\xe0\x13",
+		.alen	= 32,
+		.input	= "\x3b\x6c\x29\x36\xb6\xef\x07\xa6"
+			  "\x83\x72\x07\x4f\xcf\xfa\x66\x89"
+			  "\x5f\xca\xb1\xba\xd5\x8f\x2c\x27"
+			  "\x30\xdb\x75\x09\x93\xd4\x65\xe4",
+		.ilen	= 32,
+		.result	= "\xb0\x88\x5a\x33\xaa\xe5\xc7\x1d"
+			  "\x85\x23\xc7\xc6\x2f\xf4\x1e\x3d"
+			  "\xcc\x63\x44\x25\x07\x78\x4f\x9e"
+			  "\x96\xb8\x88\xeb\xbc\x48\x1f\x06"
+			  "\x39\xaf\x39\xac\xd8\x4a\x80\x39"
+			  "\x7b\x72\x8a\xf7",
+		.rlen	= 44,
+	}, {
+		.key	= "\xab\xd0\xe9\x33\x07\x26\xe5\x83"
+			  "\x8c\x76\x95\xd4\xb6\xdc\xf3\x46"
+			  "\xf9\x8f\xad\xe3\x02\x13\x83\x77"
+			  "\x3f\xb0\xf1\xa1\xa1\x22\x0f\x2b"
+			  "\x24\xa7\x8b",
+		.klen	= 35,
+		.iv	= "\x07\xcb\xcc\x0e\xe6\x33\xbf\xf5",
+		.assoc	= "\xd4\xdb\x30\x1d\x03\xfe\xfd\x5f"
+			  "\x87\xd4\x8c\xb6\xb6\xf1\x7a\x5d"
+			  "\xab\x90\x65\x8d\x8e\xca\x4d\x4f"
+			  "\x16\x0c\x40\x90\x4b\xc7\x36\x73",
+		.alen	= 32,
+		.input	= "\xf5\xc6\x7d\x48\xc1\xb7\xe6\x92"
+			  "\x97\x5a\xca\xc4\xa9\x6d\xf9\x3d"
+			  "\x6c\xde\xbc\xf1\x90\xea\x6a\xb2"
+			  "\x35\x86\x36\xaf\x5c\xfe\x4b\x3a",
+		.ilen	= 32,
+		.result	= "\x83\x6f\x40\x87\x72\xcf\xc1\x13"
+			  "\xef\xbb\x80\x21\x04\x6c\x58\x09"
+			  "\x07\x1b\xfc\xdf\xc0\x3f\x5b\xc7"
+			  "\xe0\x79\xa8\x6e\x71\x7c\x3f\xcf"
+			  "\x5c\xda\xb2\x33\xe5\x13\xe2\x0d"
+			  "\x74\xd1\xef\xb5\x0f\x3a\xb5\xf8",
+		.rlen	= 48,
+	},
+};
+
+static struct aead_testvec aes_ccm_rfc4309_dec_tv_template[] = {
+	{
+		.key	= "\xab\x2f\x8a\x74\xb7\x1c\xd2\xb1"
+			  "\xff\x80\x2e\x48\x7d\x82\xf8\xb9"
+			  "\xc6\xfb\x7d",
+		.klen	= 19,
+		.iv	= "\x80\x0d\x13\xab\xd8\xa6\xb2\xd8",
+		.alen	= 0,
+		.input	= "\xd5\xe8\x93\x9f\xc7\x89\x2e\x2b",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+		.novrfy	= 1,
+	}, {
+		.key	= "\xab\x2f\x8a\x74\xb7\x1c\xd2\xb1"
+			  "\xff\x80\x2e\x48\x7d\x82\xf8\xb9"
+			  "\xaf\x94\x87",
+		.klen	= 19,
+		.iv	= "\x78\x35\x82\x81\x7f\x88\x94\x68",
+		.alen	= 0,
+		.input	= "\x41\x3c\xb8\x87\x73\xcb\xf3\xf3",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+	}, {
+		.key	= "\x61\x0e\x8c\xae\xe3\x23\xb6\x38"
+			  "\x76\x1c\xf6\x3a\x67\xa3\x9c\xd8"
+			  "\xc6\xfb\x7d",
+		.klen	= 19,
+		.iv	= "\x80\x0d\x13\xab\xd8\xa6\xb2\xd8",
+		.assoc	= "\xf3\x94\x87\x78\x35\x82\x81\x7f"
+			  "\x88\x94\x68\xb1\x78\x6b\x2b\xd6"
+			  "\x04\x1f\x4e\xed\x78\xd5\x33\x66"
+			  "\xd8\x94\x99\x91\x81\x54\x62\x57",
+		.alen	= 32,
+		.input	= "\xf0\x7c\x29\x02\xae\x1c\x2f\x55"
+			  "\xd0\xd1\x3d\x1a\xa3\x6d\xe4\x0a"
+			  "\x86\xb0\x87\x6b\x62\x33\x8c\x34"
+			  "\xce\xab\x57\xcc\x79\x0b\xe0\x6f"
+			  "\x5c\x3e\x48\x1f\x6c\x46\xf7\x51"
+			  "\x8b\x84\x83\x2a\xc1\x05\xb8\xc5",
+		.ilen	= 48,
+		.result	= "\x50\x82\x3e\x07\xe2\x1e\xb6\xfb"
+			  "\x33\xe4\x73\xce\xd2\xfb\x95\x79"
+			  "\xe8\xb4\xb5\x77\x11\x10\x62\x6f"
+			  "\x6a\x82\xd1\x13\xec\xf5\xd0\x48",
+		.rlen	= 32,
+		.novrfy	= 1,
+	}, {
+		.key	= "\x61\x0e\x8c\xae\xe3\x23\xb6\x38"
+			  "\x76\x1c\xf6\x3a\x67\xa3\x9c\xd8"
+			  "\x05\xe0\xc9",
+		.klen	= 19,
+		.iv	= "\x0f\xed\x34\xea\x97\xd4\x3b\xdf",
+		.assoc	= "\x49\x5c\x50\x1f\x1d\x94\xcc\x81"
+			  "\xba\xb7\xb6\x03\xaf\xa5\xc1\xa1"
+			  "\xd8\x5c\x42\x68\xe0\x6c\xda\x89"
+			  "\x05\xac\x56\xac\x1b\x2a\xd3\x86",
+		.alen	= 32,
+		.input	= "\x39\xbe\x7d\x15\x62\x77\xf3\x3c"
+			  "\xad\x83\x52\x6d\x71\x03\x25\x1c"
+			  "\xed\x81\x3a\x9a\x16\x7d\x19\x80"
+			  "\x72\x04\x72\xd0\xf6\xff\x05\x0f"
+			  "\xb7\x14\x30\x00\x32\x9e\xa0\xa6"
+			  "\x9e\x5a\x18\xa1\xb8\xfe\xdb\xd3",
+		.ilen	= 48,
+		.result	= "\x75\x05\xbe\xc2\xd9\x1e\xde\x60"
+			  "\x47\x3d\x8c\x7d\xbd\xb5\xd9\xb7"
+			  "\xf2\xae\x61\x05\x8f\x82\x24\x3f"
+			  "\x9c\x67\x91\xe1\x38\x4f\xe4\x0c",
+		.rlen	= 32,
+	}, {
+		.key	= "\x39\xbb\xa7\xbe\x59\x97\x9e\x73"
+			  "\xa2\xbc\x6b\x98\xd7\x75\x7f\xe3"
+			  "\xa4\x48\x93\x39\x26\x71\x4a\xc6"
+			  "\xee\x49\x83",
+		.klen	= 27,
+		.iv	= "\xe9\xa9\xff\xe9\x57\xba\xfd\x9e",
+		.assoc	= "\x44\xa6\x2c\x05\xe9\xe1\x43\xb1"
+			  "\x58\x7c\xf2\x5c\x6d\x39\x0a\x64"
+			  "\xa4\xf0\x13\x05\xd1\x77\x99\x67"
+			  "\x11\xc4\xc6\xdb\x00\x56\x36\x61",
+		.alen	= 32,
+		.input	= "\x71\x99\xfa\xf4\x44\x12\x68\x9b",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+	}, {
+		.key	= "\x58\x5d\xa0\x96\x65\x1a\x04\xd7"
+			  "\x96\xe5\xc5\x68\xaa\x95\x35\xe0"
+			  "\x29\xa0\xba\x9e\x48\x78\xd1\xba"
+			  "\xee\x49\x83",
+		.klen	= 27,
+		.iv	= "\xe9\xa9\xff\xe9\x57\xba\xfd\x9e",
+		.assoc	= "\x44\xa6\x2c\x05\xe9\xe1\x43\xb1"
+			  "\x58\x7c\xf2\x5c\x6d\x39\x0a\x64"
+			  "\xa4\xf0\x13\x05\xd1\x77\x99\x67"
+			  "\x11\xc4\xc6\xdb\x00\x56\x36\x61",
+		.alen	= 32,
+		.input	= "\xfb\xe5\x5d\x34\xbe\xe5\xe8\xe7"
+			  "\x5a\xef\x2f\xbf\x1f\x7f\xd4\xb2"
+			  "\x66\xca\x61\x1e\x96\x7a\x61\xb3"
+			  "\x1c\x16\x45\x52\xba\x04\x9c\x9f"
+			  "\xb1\xd2\x40\xbc\x52\x7c\x6f\xb1",
+		.ilen	= 40,
+		.result	= "\x85\x34\x66\x42\xc8\x92\x0f\x36"
+			  "\x58\xe0\x6b\x91\x3c\x98\x5c\xbb"
+			  "\x0a\x85\xcc\x02\xad\x7a\x96\xe9"
+			  "\x65\x43\xa4\xc3\x0f\xdc\x55\x81",
+		.rlen	= 32,
+	}, {
+		.key	= "\x58\x5d\xa0\x96\x65\x1a\x04\xd7"
+			  "\x96\xe5\xc5\x68\xaa\x95\x35\xe0"
+			  "\x29\xa0\xba\x9e\x48\x78\xd1\xba"
+			  "\xd1\xfc\x57",
+		.klen	= 27,
+		.iv	= "\x9c\xfe\xb8\x9c\xad\x71\xaa\x1f",
+		.assoc	= "\x86\x67\xa5\xa9\x14\x5f\x0d\xc6"
+			  "\xff\x14\xc7\x44\xbf\x6c\x3a\xc3"
+			  "\xff\xb6\x81\xbd\xe2\xd5\x06\xc7"
+			  "\x3c\xa1\x52\x13\x03\x8a\x23\x3a",
+		.alen	= 32,
+		.input	= "\x3f\x66\xb0\x9d\xe5\x4b\x38\x00"
+			  "\xc6\x0e\x6e\xe5\xd6\x98\xa6\x37"
+			  "\x8c\x26\x33\xc6\xb2\xa2\x17\xfa"
+			  "\x64\x19\xc0\x30\xd7\xfc\x14\x6b"
+			  "\xe3\x33\xc2\x04\xb0\x37\xbe\x3f"
+			  "\xa9\xb4\x2d\x68\x03\xa3\x44\xef",
+		.ilen	= 48,
+		.result	= "\x02\x87\x4d\x28\x80\x6e\xb2\xed"
+			  "\x99\x2a\xa8\xca\x04\x25\x45\x90"
+			  "\x1d\xdd\x5a\xd9\xe4\xdb\x9c\x9c"
+			  "\x49\xe9\x01\xfe\xa7\x80\x6d\x6b",
+		.rlen	= 32,
+		.novrfy	= 1,
+	}, {
+		.key	= "\xa4\x4b\x54\x29\x0a\xb8\x6d\x01"
+			  "\x5b\x80\x2a\xcf\x25\xc4\xb7\x5c"
+			  "\x20\x2c\xad\x30\xc2\x2b\x41\xfb"
+			  "\x0e\x85\xbc\x33\xad\x0f\x2b\xff"
+			  "\xee\x49\x83",
+		.klen	= 35,
+		.iv	= "\xe9\xa9\xff\xe9\x57\xba\xfd\x9e",
+		.alen	= 0,
+		.input	= "\x1f\xb8\x8f\xa3\xdd\x54\x00\xf2",
+		.ilen	= 8,
+		.result	= "\x00",
+		.rlen	= 0,
+	}, {
+		.key	= "\x39\xbb\xa7\xbe\x59\x97\x9e\x73"
+			  "\xa2\xbc\x6b\x98\xd7\x75\x7f\xe3"
+			  "\xa4\x48\x93\x39\x26\x71\x4a\xc6"
+			  "\xae\x8f\x11\x4c\xc2\x9c\x4a\xbb"
+			  "\x85\x34\x66",
+		.klen	= 35,
+		.iv	= "\x42\xc8\x92\x0f\x36\x58\xe0\x6b",
+		.alen	= 0,
+		.input	= "\x48\x01\x5e\x02\x24\x04\x66\x47"
+			  "\xa1\xea\x6f\xaf\xe8\xfc\xfb\xdd"
+			  "\xa5\xa9\x87\x8d\x84\xee\x2e\x77"
+			  "\xbb\x86\xb9\xf5\x5c\x6c\xff\xf6"
+			  "\x72\xc3\x8e\xf7\x70\xb1\xb2\x07"
+			  "\xbc\xa8\xa3\xbd\x83\x7c\x1d\x2a",
+		.ilen	= 48,
+		.result	= "\xdc\x56\xf2\x71\xb0\xb1\xa0\x6c"
+			  "\xf0\x97\x3a\xfb\x6d\xe7\x32\x99"
+			  "\x3e\xaf\x70\x5e\xb2\x4d\xea\x39"
+			  "\x89\xd4\x75\x7a\x63\xb1\xda\x93",
+		.rlen	= 32,
+		.novrfy	= 1,
+	}, {
+		.key	= "\x58\x5d\xa0\x96\x65\x1a\x04\xd7"
+			  "\x96\xe5\xc5\x68\xaa\x95\x35\xe0"
+			  "\x29\xa0\xba\x9e\x48\x78\xd1\xba"
+			  "\x0d\x1a\x53\x3b\xb5\xe3\xf8\x8b"
+			  "\xcf\x76\x3f",
+		.klen	= 35,
+		.iv	= "\xd9\x95\x75\x8f\x44\x89\x40\x7b",
+		.assoc	= "\x8f\x86\x6c\x4d\x1d\xc5\x39\x88"
+			  "\xc8\xf3\x5c\x52\x10\x63\x6f\x2b"
+			  "\x8a\x2a\xc5\x6f\x30\x23\x58\x7b"
+			  "\xfb\x36\x03\x11\xb4\xd9\xf2\xfe",
+		.alen	= 32,
+		.input	= "\x48\x58\xd6\xf3\xad\x63\x58\xbf"
+			  "\xae\xc7\x5e\xae\x83\x8f\x7b\xe4"
+			  "\x78\x5c\x4c\x67\x71\x89\x94\xbf"
+			  "\x47\xf1\x63\x7e\x1c\x59\xbd\xc5"
+			  "\x7f\x44\x0a\x0c\x01\x18\x07\x92"
+			  "\xe1\xd3\x51\xce\x32\x6d\x0c\x5b",
+		.ilen	= 48,
+		.result	= "\xc2\x54\xc8\xde\x78\x87\x77\x40"
+			  "\x49\x71\xe4\xb7\xe7\xcb\x76\x61"
+			  "\x0a\x41\xb9\xe9\xc0\x76\x54\xab"
+			  "\x04\x49\x3b\x19\x93\x57\x25\x5d",
+		.rlen	= 32,
+	},
+};
+
+/*
+ * ANSI X9.31 Continuous Pseudo-Random Number Generator (AES mode)
+ * test vectors, taken from Appendix B.2.9 and B.2.10:
+ *     http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf
+ * Only AES-128 is supported at this time.
+ */
+#define ANSI_CPRNG_AES_TEST_VECTORS	6
+
+static struct cprng_testvec ansi_cprng_aes_tv_template[] = {
+	{
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xf9",
+		.dtlen	= 16,
+		.v	= "\x80\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x59\x53\x1e\xd1\x3b\xb0\xc0\x55"
+			  "\x84\x79\x66\x85\xc1\x2f\x76\x41",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfa",
+		.dtlen	= 16,
+		.v	= "\xc0\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x7c\x22\x2c\xf4\xca\x8f\xa2\x4c"
+			  "\x1c\x9c\xb6\x41\xa9\xf3\x22\x0d",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfb",
+		.dtlen	= 16,
+		.v	= "\xe0\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x8a\xaa\x00\x39\x66\x67\x5b\xe5"
+			  "\x29\x14\x28\x81\xa9\x4d\x4e\xc7",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfc",
+		.dtlen	= 16,
+		.v	= "\xf0\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x88\xdd\xa4\x56\x30\x24\x23\xe5"
+			  "\xf6\x9d\xa5\x7e\x7b\x95\xc7\x3a",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {
+		.key	= "\xf3\xb1\x66\x6d\x13\x60\x72\x42"
+			  "\xed\x06\x1c\xab\xb8\xd4\x62\x02",
+		.klen	= 16,
+		.dt	= "\xe6\xb3\xbe\x78\x2a\x23\xfa\x62"
+			  "\xd7\x1d\x4a\xfb\xb0\xe9\x22\xfd",
+		.dtlen	= 16,
+		.v	= "\xf8\x00\x00\x00\x00\x00\x00\x00"
+			  "\x00\x00\x00\x00\x00\x00\x00\x00",
+		.vlen	= 16,
+		.result	= "\x05\x25\x92\x46\x61\x79\xd2\xcb"
+			  "\x78\xc4\x0b\x14\x0a\x5a\x9a\xc8",
+		.rlen	= 16,
+		.loops	= 1,
+	}, {	/* Monte Carlo Test */
+		.key	= "\x9f\x5b\x51\x20\x0b\xf3\x34\xb5"
+			  "\xd8\x2b\xe8\xc3\x72\x55\xc8\x48",
+		.klen	= 16,
+		.dt	= "\x63\x76\xbb\xe5\x29\x02\xba\x3b"
+			  "\x67\xc9\x25\xfa\x70\x1f\x11\xac",
+		.dtlen	= 16,
+		.v	= "\x57\x2c\x8e\x76\x87\x26\x47\x97"
+			  "\x7e\x74\xfb\xdd\xc4\x95\x01\xd1",
+		.vlen	= 16,
+		.result	= "\x48\xe9\xbd\x0d\x06\xee\x18\xfb"
+			  "\xe4\x57\x90\xd5\xc3\xfc\x9b\x73",
+		.rlen	= 16,
+		.loops	= 10000,
+	},
+};
+
 /* Cast5 test vectors from RFC 2144 */
 #define CAST5_ENC_TEST_VECTORS	3
 #define CAST5_DEC_TEST_VECTORS	3
diff --git a/crypto/zlib.c b/crypto/zlib.c
index 33609bab614..c3015733c99 100644
--- a/crypto/zlib.c
+++ b/crypto/zlib.c
@@ -165,15 +165,15 @@ static int zlib_compress_update(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 static int zlib_compress_final(struct crypto_pcomp *tfm,
@@ -195,15 +195,15 @@ static int zlib_compress_final(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 
@@ -280,15 +280,15 @@ static int zlib_decompress_update(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 static int zlib_decompress_final(struct crypto_pcomp *tfm,
@@ -328,15 +328,15 @@ static int zlib_decompress_final(struct crypto_pcomp *tfm,
 		return -EINVAL;
 	}
 
+	ret = req->avail_out - stream->avail_out;
 	pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n",
 		 stream->avail_in, stream->avail_out,
-		 req->avail_in - stream->avail_in,
-		 req->avail_out - stream->avail_out);
+		 req->avail_in - stream->avail_in, ret);
 	req->next_in = stream->next_in;
 	req->avail_in = stream->avail_in;
 	req->next_out = stream->next_out;
 	req->avail_out = stream->avail_out;
-	return 0;
+	return ret;
 }
 
 
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 17e50824a6f..72ac28da14e 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -5,40 +5,43 @@
 ccflags-y			:= -Os
 ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 
-obj-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y	+= acpi.o
+
+acpi-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
 	 dsmethod.o  dsobject.o  dsutils.o   dswload.o  dswstate.o \
 	 dsinit.o
 
-obj-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
+acpi-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
 	 evmisc.o   evrgnini.o  evxface.o  evxfregn.o \
 	 evgpe.o    evgpeblk.o
 
-obj-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
+acpi-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
 	 exconvrt.o  exfldio.o  exoparg1.o  exprep.o    exresop.o   exsystem.o\
 	 excreate.o  exmisc.o   exoparg2.o  exregion.o  exstore.o   exutils.o \
 	 exdump.o    exmutex.o  exoparg3.o  exresnte.o  exstoren.o
 
-obj-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
 
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 
-obj-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
+acpi-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
 	 nsalloc.o   nseval.o    nsnames.o   nsutils.o   nsxfname.o \
 	 nsdump.o    nsinit.o    nsobject.o  nswalk.o    nsxfobj.o  \
 	 nsparse.o   nspredef.o
 
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
 
-obj-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
+acpi-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
 	 psopcode.o  psscope.o  psutils.o  psxface.o
 
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
 	 rscalc.o  rsirq.o  rsmemory.o  rsutils.o
 
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
 
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
 
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
 		utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
 		utstate.o utmutex.o utobject.o utresrc.o utlock.o
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 772ee5c4ccc..2ec394a328e 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -787,7 +787,12 @@ struct acpi_bit_register_info {
 
 /* For control registers, both ignored and reserved bits must be preserved */
 
-#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0201	/* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bits 9 */
 #define ACPI_PM1_CONTROL_RESERVED_BITS          0xC1F8	/* Bits 14-15, 3-8 */
 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
 	       (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e8f7b64e92d..ae862f1798d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
       end:
 	if (result)
 		printk(KERN_WARNING PREFIX
-			      "Transitioning device [%s] to D%d\n",
+			      "Device [%s] failed to transition to D%d\n",
 			      device->pnp.bus_id, state);
 	else {
 		device->power.state = state;
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index 95650f83ce2..bc46de3d967 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -116,9 +116,6 @@ int acpi_pci_bind(struct acpi_device *device)
 	struct acpi_pci_data *pdata;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	acpi_handle handle;
-	struct pci_dev *dev;
-	struct pci_bus *bus;
-
 
 	if (!device || !device->parent)
 		return -EINVAL;
@@ -176,20 +173,9 @@ int acpi_pci_bind(struct acpi_device *device)
 	 * Locate matching device in PCI namespace.  If it doesn't exist
 	 * this typically means that the device isn't currently inserted
 	 * (e.g. docking station, port replicator, etc.).
-	 * We cannot simply search the global pci device list, since
-	 * PCI devices are added to the global pci list when the root
-	 * bridge start ops are run, which may not have happened yet.
 	 */
-	bus = pci_find_bus(data->id.segment, data->id.bus);
-	if (bus) {
-		list_for_each_entry(dev, &bus->devices, bus_list) {
-			if (dev->devfn == PCI_DEVFN(data->id.device,
-						    data->id.function)) {
-				data->dev = dev;
-				break;
-			}
-		}
-	}
+	data->dev = pci_get_slot(pdata->bus,
+				PCI_DEVFN(data->id.device, data->id.function));
 	if (!data->dev) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device %04x:%02x:%02x.%d not present in PCI namespace\n",
@@ -259,9 +245,10 @@ int acpi_pci_bind(struct acpi_device *device)
 
       end:
 	kfree(buffer.pointer);
-	if (result)
+	if (result) {
+		pci_dev_put(data->dev);
 		kfree(data);
-
+	}
 	return result;
 }
 
@@ -303,6 +290,7 @@ static int acpi_pci_unbind(struct acpi_device *device)
 	if (data->dev->subordinate) {
 		acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
 	}
+	pci_dev_put(data->dev);
 	kfree(data);
 
       end:
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 51b9f8280f8..2faa9e2ac89 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -401,7 +401,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 		/* Interrupt Line values above 0xF are forbidden */
 		if (dev->irq > 0 && (dev->irq <= 0xF)) {
 			printk(" - using IRQ %d\n", dev->irq);
-			acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
+			acpi_register_gsi(&dev->dev, dev->irq,
+					  ACPI_LEVEL_SENSITIVE,
 					  ACPI_ACTIVE_LOW);
 			return 0;
 		} else {
@@ -410,7 +411,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 		}
 	}
 
-	rc = acpi_register_gsi(gsi, triggering, polarity);
+	rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
 	if (rc < 0) {
 		dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
 			 pin_name(pin));
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 45ad3288c5f..23f0fb84f1c 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -844,7 +844,7 @@ static int acpi_processor_add(struct acpi_device *device)
 	if (!pr)
 		return -ENOMEM;
 
-	if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
 		kfree(pr);
 		return -ENOMEM;
 	}
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..10a2d913635 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -148,6 +148,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr,
 	if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 		return;
 
+	if (boot_cpu_has(X86_FEATURE_AMDC1E))
+		type = ACPI_STATE_C1;
+
 	/*
 	 * Check, if one of the previous states already marked the lapic
 	 * unstable
@@ -202,21 +205,44 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
  * Suspend / resume control
  */
 static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+	u32 resumed_bm_rld;
+
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+	if (resumed_bm_rld != saved_bm_rld)
+		acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
+	if (acpi_idle_suspend == 1)
+		return 0;
+
+	acpi_idle_bm_rld_save();
 	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
+	if (acpi_idle_suspend == 0)
+		return 0;
+
+	acpi_idle_bm_rld_restore();
 	acpi_idle_suspend = 0;
 	return 0;
 }
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
 {
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -226,13 +252,17 @@ static int tsc_halts_in_c(int state)
 		 * C/P/S0/S1 states when this bit is set.
 		 */
 		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return 0;
+			return;
 
 		/*FALL THROUGH*/
 	default:
-		return state > ACPI_STATE_C1;
+		/* TSC could halt in idle, so notify users */
+		if (state > ACPI_STATE_C1)
+			mark_tsc_unstable("TSC halts in idle");
 	}
 }
+#else
+static void tsc_check_state(int state) { return; }
 #endif
 
 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
@@ -578,17 +608,13 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 
 	pr->power.timer_broadcast_on_state = INT_MAX;
 
-	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-		/* TSC could halt in idle, so notify users */
-		if (tsc_halts_in_c(cx->type))
-			mark_tsc_unstable("TSC halts in idle");;
-#endif
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
+			acpi_timer_check_state(i, pr, cx);
 			break;
 
 		case ACPI_STATE_C2:
@@ -603,6 +629,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 				acpi_timer_check_state(i, pr, cx);
 			break;
 		}
+		if (cx->valid)
+			tsc_check_state(cx->type);
 
 		if (cx->valid)
 			working++;
@@ -806,11 +834,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 
 	/* Do not access any ACPI IO ports in suspend path */
 	if (acpi_idle_suspend) {
-		acpi_safe_halt();
 		local_irq_enable();
+		cpu_relax();
 		return 0;
 	}
 
+	acpi_state_timer_broadcast(pr, cx, 1);
 	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
 	kt2 = ktime_get_real();
@@ -818,6 +847,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 
 	local_irq_enable();
 	cx->usage++;
+	acpi_state_timer_broadcast(pr, cx, 0);
 
 	return idle_time;
 }
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index cafb41000f6..60e543d3234 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -309,9 +309,15 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
 				  (u32) px->bus_master_latency,
 				  (u32) px->control, (u32) px->status));
 
-		if (!px->core_frequency) {
-			printk(KERN_ERR PREFIX
-				    "Invalid _PSS data: freq is zero\n");
+		/*
+ 		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+		 */
+		if (!px->core_frequency ||
+		    ((u32)(px->core_frequency * 1000) !=
+		     (px->core_frequency * 1000))) {
+			printk(KERN_ERR FW_BUG PREFIX
+			       "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
+			       px->core_frequency);
 			result = -EFAULT;
 			kfree(pr->performance->states);
 			goto end;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index d0d1f4d5043..227543789ba 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -45,6 +45,14 @@
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_throttling");
 
+/* ignore_tpc:
+ *  0 -> acpi processor driver doesn't ignore _TPC values
+ *  1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
 struct throttling_tstate {
 	unsigned int cpu;		/* cpu nr */
 	int target_state;		/* target T-state */
@@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 
 	if (!pr)
 		return -EINVAL;
+
+	if (ignore_tpc)
+		goto end;
+
 	status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
 	if (ACPI_FAILURE(status)) {
 		if (status != AE_NOT_FOUND) {
@@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		}
 		return -ENODEV;
 	}
+
+end:
 	pr->throttling_platform_limit = (int)tpc;
 	return 0;
 }
@@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
 	struct acpi_processor_limit *limit;
 	int target_state;
 
+	if (ignore_tpc)
+		return 0;
+
 	result = acpi_processor_get_platform_limit(pr);
 	if (result) {
 		/* Throttling Limit is unsupported */
@@ -821,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 	ret = acpi_read_throttling_status(pr, &value);
 	if (ret >= 0) {
 		state = acpi_get_throttling_state(pr, value);
+		if (state == -1) {
+			ACPI_WARNING((AE_INFO,
+				"Invalid throttling state, reset"));
+			state = 0;
+			ret = acpi_processor_set_throttling(pr, state);
+			if (ret)
+				return ret;
+		}
 		pr->throttling.state = state;
 	}
 
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index d7ff61c0d57..1bdfb37377e 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -538,6 +538,57 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 	return -EINVAL;
 }
 
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+	bqc_offset_aml_bug_workaround = 9;
+	return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+	/*
+	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+	 */
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5720",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+		},
+	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5710Z",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+		},
+	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "eMachines E510",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+		},
+	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5315",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+		},
+	},
+	{}
+};
+
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 					unsigned long long *level)
@@ -557,6 +608,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 				*level = device->brightness->levels[*level + 2];
 
 			}
+			*level += bqc_offset_aml_bug_workaround;
 			device->brightness->curr = *level;
 			return 0;
 		} else {
@@ -2290,13 +2342,15 @@ EXPORT_SYMBOL(acpi_video_register);
 
 static int __init acpi_video_init(void)
 {
+	dmi_check_system(video_dmi_table);
+
 	if (intel_opregion_present())
 		return 0;
 
 	return acpi_video_register();
 }
 
-void __exit acpi_video_exit(void)
+void acpi_video_exit(void)
 {
 
 	acpi_bus_unregister_driver(&acpi_video_bus);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9120717c070..2aa1908e5ce 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -535,6 +535,15 @@ config PATA_OPTIDMA
 
 	  If unsure, say N.
 
+config PATA_PALMLD
+	tristate "Palm LifeDrive PATA support"
+	depends on MACH_PALMLD
+	help
+	  This option enables support for Palm LifeDrive's internal ATA
+	  port via the new ATA layer.
+
+	  If unsure, say N.
+
 config PATA_PCMCIA
 	tristate "PCMCIA PATA support"
 	depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7f1ecf99528..1558059874f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 08186ecbaf8..15a23031833 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -77,8 +77,6 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 			      size_t size);
 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 					ssize_t size);
-#define MAX_SLOTS 8
-#define MAX_RETRY 15
 
 enum {
 	AHCI_PCI_BAR		= 5,
@@ -220,6 +218,7 @@ enum {
 	AHCI_HFLAG_NO_HOTPLUG		= (1 << 7), /* ignore PxSERR.DIAG.N */
 	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
 	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
+	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
 
 	/* ap->flags bits */
 
@@ -230,6 +229,10 @@ enum {
 
 	ICH_MAP				= 0x90, /* ICH MAP register */
 
+	/* em constants */
+	EM_MAX_SLOTS			= 8,
+	EM_MAX_RETRY			= 5,
+
 	/* em_ctl bits */
 	EM_CTL_RST			= (1 << 9), /* Reset */
 	EM_CTL_TM			= (1 << 8), /* Transmit Message */
@@ -281,8 +284,8 @@ struct ahci_port_priv {
 	unsigned int		ncq_saw_dmas:1;
 	unsigned int		ncq_saw_sdb:1;
 	u32 			intr_mask;	/* interrupts to enable */
-	struct ahci_em_priv	em_priv[MAX_SLOTS];/* enclosure management info
-					 	 * per PM slot */
+	/* enclosure management info per PM slot */
+	struct ahci_em_priv	em_priv[EM_MAX_SLOTS];
 };
 
 static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
@@ -312,7 +315,6 @@ static void ahci_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static int ahci_port_resume(struct ata_port *ap);
 static void ahci_dev_config(struct ata_device *dev);
-static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
 			       u32 opts);
 #ifdef CONFIG_PM
@@ -403,14 +405,14 @@ static struct ata_port_operations ahci_sb600_ops = {
 #define AHCI_HFLAGS(flags)	.private_data	= (void *)(flags)
 
 static const struct ata_port_info ahci_port_info[] = {
-	/* board_ahci */
+	[board_ahci] =
 	{
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	/* board_ahci_vt8251 */
+	[board_ahci_vt8251] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
@@ -418,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
 	},
-	/* board_ahci_ign_iferr */
+	[board_ahci_ign_iferr] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_IRQ_IF_ERR),
 		.flags		= AHCI_FLAG_COMMON,
@@ -426,17 +428,16 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	/* board_ahci_sb600 */
+	[board_ahci_sb600] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL |
-				 AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
-				 AHCI_HFLAG_SECT255),
+				 AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_sb600_ops,
 	},
-	/* board_ahci_mv */
+	[board_ahci_mv] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
 				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
@@ -446,7 +447,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	/* board_ahci_sb700, for SB700 and SB800 */
+	[board_ahci_sb700] =	/* for SB700 and SB800 */
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL),
 		.flags		= AHCI_FLAG_COMMON,
@@ -454,7 +455,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_sb600_ops,
 	},
-	/* board_ahci_mcp65 */
+	[board_ahci_mcp65] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_YES_NCQ),
 		.flags		= AHCI_FLAG_COMMON,
@@ -462,7 +463,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	/* board_ahci_nopmp */
+	[board_ahci_nopmp] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
@@ -1140,12 +1141,12 @@ static void ahci_start_port(struct ata_port *ap)
 			emp = &pp->em_priv[link->pmp];
 
 			/* EM Transmit bit maybe busy during init */
-			for (i = 0; i < MAX_RETRY; i++) {
+			for (i = 0; i < EM_MAX_RETRY; i++) {
 				rc = ahci_transmit_led_message(ap,
 							       emp->led_state,
 							       4);
 				if (rc == -EBUSY)
-					udelay(100);
+					msleep(1);
 				else
 					break;
 			}
@@ -1339,7 +1340,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 
 	/* get the slot number from the message */
 	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-	if (pmp < MAX_SLOTS)
+	if (pmp < EM_MAX_SLOTS)
 		emp = &pp->em_priv[pmp];
 	else
 		return -EINVAL;
@@ -1407,7 +1408,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 
 	/* get the slot number from the message */
 	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-	if (pmp < MAX_SLOTS)
+	if (pmp < EM_MAX_SLOTS)
 		emp = &pp->em_priv[pmp];
 	else
 		return -EINVAL;
@@ -2316,9 +2317,17 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ahci_host_priv *hpriv = host->private_data;
 	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	u32 ctl;
 
+	if (mesg.event & PM_EVENT_SUSPEND &&
+	    hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "BIOS update required for suspend/resume\n");
+		return -EIO;
+	}
+
 	if (mesg.event & PM_EVENT_SLEEP) {
 		/* AHCI spec rev1.1 section 8.3.3:
 		 * Software must disable interrupts prior to requesting a
@@ -2575,6 +2584,51 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
 	}
 }
 
+/*
+ * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older
+ * BIOS.  The oldest version known to be broken is 0901 and working is
+ * 1501 which was released on 2007-10-26.  Force 32bit DMA on anything
+ * older than 1501.  Please read bko#9412 for more info.
+ */
+static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id sysids[] = {
+		{
+			.ident = "ASUS M2A-VM",
+			.matches = {
+				DMI_MATCH(DMI_BOARD_VENDOR,
+					  "ASUSTeK Computer INC."),
+				DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
+			},
+		},
+		{ }
+	};
+	const char *cutoff_mmdd = "10/26";
+	const char *date;
+	int year;
+
+	if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
+	    !dmi_check_system(sysids))
+		return false;
+
+	/*
+	 * Argh.... both version and date are free form strings.
+	 * Let's hope they're using the same date format across
+	 * different versions.
+	 */
+	date = dmi_get_system_info(DMI_BIOS_DATE);
+	year = dmi_get_year(DMI_BIOS_DATE);
+	if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' &&
+	    (year > 2007 ||
+	     (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0)))
+		return false;
+
+	dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, "
+		   "forcing 32bit DMA, update BIOS\n");
+
+	return true;
+}
+
 static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
 {
 	static const struct dmi_system_id broken_systems[] = {
@@ -2610,6 +2664,63 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
 	return false;
 }
 
+static bool ahci_broken_suspend(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id sysids[] = {
+		/*
+		 * On HP dv[4-6] and HDX18 with earlier BIOSen, link
+		 * to the harddisk doesn't become online after
+		 * resuming from STR.  Warn and fail suspend.
+		 */
+		{
+			.ident = "dv4",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME,
+					  "HP Pavilion dv4 Notebook PC"),
+			},
+			.driver_data = "F.30", /* cutoff BIOS version */
+		},
+		{
+			.ident = "dv5",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME,
+					  "HP Pavilion dv5 Notebook PC"),
+			},
+			.driver_data = "F.16", /* cutoff BIOS version */
+		},
+		{
+			.ident = "dv6",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME,
+					  "HP Pavilion dv6 Notebook PC"),
+			},
+			.driver_data = "F.21",	/* cutoff BIOS version */
+		},
+		{
+			.ident = "HDX18",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME,
+					  "HP HDX18 Notebook PC"),
+			},
+			.driver_data = "F.23",	/* cutoff BIOS version */
+		},
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(sysids);
+	const char *ver;
+
+	if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
+		return false;
+
+	ver = dmi_get_system_info(DMI_BIOS_VERSION);
+
+	return !ver || strcmp(ver, dmi->driver_data) < 0;
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -2678,6 +2789,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
 		hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
 
+	/* apply ASUS M2A_VM quirk */
+	if (ahci_asus_m2a_vm_32bit_only(pdev))
+		hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
+
 	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
 		pci_enable_msi(pdev);
 
@@ -2715,6 +2830,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			"quirky BIOS, skipping spindown on poweroff\n");
 	}
 
+	if (ahci_broken_suspend(pdev)) {
+		hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "BIOS update required for suspend/resume\n");
+	}
+
 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d51a17c0f59..d0a14cf2bd7 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -223,10 +223,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* ICH8 Mobile PATA Controller */
 	{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 
-	/* NOTE: The following PCI ids must be kept in sync with the
-	 * list in drivers/pci/quirks.c.
-	 */
-
+	/* SATA ports */
+	
 	/* 82801EB (ICH5) */
 	{ 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
 	/* 82801EB (ICH5) */
@@ -1455,6 +1453,15 @@ static bool piix_broken_system_poweroff(struct pci_dev *pdev)
 			/* PCI slot number of the controller */
 			.driver_data = (void *)0x1FUL,
 		},
+		{
+			.ident = "HP Compaq nc6000",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
 
 		{ }	/* terminate list */
 	};
@@ -1500,8 +1507,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	/* no hotplugging support (FIXME) */
-	if (!in_module_init)
+	/* no hotplugging support for later devices (FIXME) */
+	if (!in_module_init && ent->driver_data >= ich5_sata)
 		return -ENODEV;
 
 	if (piix_broken_system_poweroff(pdev)) {
@@ -1582,6 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 		host->ports[1]->mwdma_mask = 0;
 		host->ports[1]->udma_mask = 0;
 	}
+	host->flags |= ATA_HOST_PARALLEL_SCAN;
 
 	pci_set_master(pdev);
 	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6273d98d00e..ac176da1f94 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 /**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
  * @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
  *
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
  *
  * LOCKING:
  * EH context.
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c9242301cfa..ca4d208ddf3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5031,7 +5031,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
 {
 	int nr_done = 0;
 	u32 done_mask;
-	int i;
 
 	done_mask = ap->qc_active ^ qc_active;
 
@@ -5041,16 +5040,16 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
 		return -EINVAL;
 	}
 
-	for (i = 0; i < ATA_MAX_QUEUE; i++) {
+	while (done_mask) {
 		struct ata_queued_cmd *qc;
+		unsigned int tag = __ffs(done_mask);
 
-		if (!(done_mask & (1 << i)))
-			continue;
-
-		if ((qc = ata_qc_from_tag(ap, i))) {
+		qc = ata_qc_from_tag(ap, tag);
+		if (qc) {
 			ata_qc_complete(qc);
 			nr_done++;
 		}
+		done_mask &= ~(1 << tag);
 	}
 
 	return nr_done;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 94919ad03df..fa22f94ca41 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2864,7 +2864,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 /**
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
  *	ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 68d9132d8f6..d0dfeef55db 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1084,7 +1084,7 @@ static int atapi_drain_needed(struct request *rq)
 	if (likely(!blk_pc_request(rq)))
 		return 0;
 
-	if (!rq->data_len || (rq->cmd_flags & REQ_RW))
+	if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW))
 		return 0;
 
 	return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
@@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
 
 static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
 {
+	int form_factor = ata_id_form_factor(args->id);
+	int media_rotation_rate = ata_id_rotation_rate(args->id);
+
 	rbuf[1] = 0xb1;
 	rbuf[3] = 0x3c;
-	if (ata_id_major_version(args->id) > 7) {
-		rbuf[4] = args->id[217] >> 8;
-		rbuf[5] = args->id[217];
-		rbuf[7] = args->id[168] & 0xf;
-	}
+	rbuf[4] = media_rotation_rate >> 8;
+	rbuf[5] = media_rotation_rate;
+	rbuf[7] = form_factor;
 
 	return 0;
 }
@@ -2376,7 +2377,23 @@ saving_not_supp:
  */
 static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 {
-	u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
+	struct ata_device *dev = args->dev;
+	u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+	u8 log_per_phys = 0;
+	u16 lowest_aligned = 0;
+	u16 word_106 = dev->id[106];
+	u16 word_209 = dev->id[209];
+
+	if ((word_106 & 0xc000) == 0x4000) {
+		/* Number and offset of logical sectors per physical sector */
+		if (word_106 & (1 << 13))
+			log_per_phys = word_106 & 0xf;
+		if ((word_209 & 0xc000) == 0x4000) {
+			u16 first = dev->id[209] & 0x3fff;
+			if (first > 0)
+				lowest_aligned = (1 << log_per_phys) - first;
+		}
+	}
 
 	VPRINTK("ENTER\n");
 
@@ -2407,6 +2424,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 		/* sector size */
 		rbuf[10] = ATA_SECT_SIZE >> 8;
 		rbuf[11] = ATA_SECT_SIZE & 0xff;
+
+		rbuf[12] = 0;
+		rbuf[13] = log_per_phys;
+		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+		rbuf[15] = lowest_aligned;
 	}
 
 	return 0;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index bb18415d3d6..bbbb1fab175 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -727,17 +727,23 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
 	else
 		iowrite16_rep(data_addr, buf, words);
 
-	/* Transfer trailing 1 byte, if any. */
+	/* Transfer trailing byte, if any. */
 	if (unlikely(buflen & 0x01)) {
-		__le16 align_buf[1] = { 0 };
-		unsigned char *trailing_buf = buf + buflen - 1;
+		unsigned char pad[2];
 
+		/* Point buf to the tail of buffer */
+		buf += buflen - 1;
+
+		/*
+		 * Use io*16_rep() accessors here as well to avoid pointlessly
+		 * swapping bytes to and fro on the big endian machines...
+		 */
 		if (rw == READ) {
-			align_buf[0] = cpu_to_le16(ioread16(data_addr));
-			memcpy(trailing_buf, align_buf, 1);
+			ioread16_rep(data_addr, pad, 1);
+			*buf = pad[0];
 		} else {
-			memcpy(align_buf, trailing_buf, 1);
-			iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+			pad[0] = *buf;
+			iowrite16_rep(data_addr, pad, 1);
 		}
 		words++;
 	}
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 751b7ea4816..fc9c5d6d7d8 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -497,14 +497,16 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0x20 added DMA */
 	static const struct ata_port_info info_20 = {
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+							ATA_FLAG_IGN_SIMPLEX,
 		.pio_mask = ATA_PIO4,
 		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &ali_20_port_ops
 	};
 	/* Revision 0x20 with support logic added UDMA */
 	static const struct ata_port_info info_20_udma = {
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+							ATA_FLAG_IGN_SIMPLEX,
 		.pio_mask = ATA_PIO4,
 		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA2,
@@ -512,7 +514,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC2 adds UDMA66 */
 	static const struct ata_port_info info_c2 = {
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+							ATA_FLAG_IGN_SIMPLEX,
 		.pio_mask = ATA_PIO4,
 		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
@@ -520,7 +523,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC3 is UDMA66 for now */
 	static const struct ata_port_info info_c3 = {
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+							ATA_FLAG_IGN_SIMPLEX,
 		.pio_mask = ATA_PIO4,
 		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
@@ -528,7 +532,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC4 is UDMA100 */
 	static const struct ata_port_info info_c4 = {
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+							ATA_FLAG_IGN_SIMPLEX,
 		.pio_mask = ATA_PIO4,
 		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
@@ -536,7 +541,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
 	static const struct ata_port_info info_c5 = {
-		.flags = ATA_FLAG_SLAVE_POSS,
+		.flags = ATA_FLAG_SLAVE_POSS | 	ATA_FLAG_IGN_SIMPLEX,
 		.pio_mask = ATA_PIO4,
 		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 2085e0a3a05..2a6412f5d11 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_efar"
-#define DRV_VERSION	"0.4.4"
+#define DRV_VERSION	"0.4.5"
 
 /**
  *	efar_pre_reset	-	Enable bits
@@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 			    { 2, 1 },
 			    { 2, 3 }, };
 
-	if (pio > 2)
-		control |= 1;	/* TIME1 enable */
+	if (pio > 1)
+		control |= 1;	/* TIME */
 	if (ata_pio_need_iordy(adev))	/* PIO 3/4 require IORDY */
-		control |= 2;	/* IE enable */
-	/* Intel specifies that the PPE functionality is for disk only */
+		control |= 2;	/* IE */
+	/* Intel specifies that the prefetch/posting is for disk only */
 	if (adev->class == ATA_DEV_ATA)
-		control |= 4;	/* PPE enable */
+		control |= 4;	/* PPE */
 
 	pci_read_config_word(dev, idetm_port, &idetm_data);
 
-	/* Enable PPE, IE and TIME as appropriate */
-
+	/* Set PPE, IE, and TIME as appropriate */
 	if (adev->devno == 0) {
 		idetm_data &= 0xCCF0;
 		idetm_data |= control;
@@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
-	idetm_data |= 0x4000;	/* Ensure SITRE is enabled */
+	idetm_data |= 0x4000;	/* Ensure SITRE is set */
 	pci_write_config_word(dev, idetm_port, idetm_data);
 }
 
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index f72c6c5b820..6932e56d179 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -48,6 +48,7 @@
  *
  */
 
+#include <linux/async.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -1028,6 +1029,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 				&legacy_sht);
 	if (ret)
 		goto fail;
+	async_synchronize_full();
 	ld->platform_dev = pdev;
 
 	/* Nothing found means we drop the port as its probably not there */
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index bdb236957cb..f0d52f72f5b 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -20,13 +20,24 @@
 
 /* No PIO or DMA methods needed for this device */
 
+static unsigned int netcell_read_id(struct ata_device *adev,
+					struct ata_taskfile *tf, u16 *id)
+{
+	unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+	/* Firmware forgets to mark words 85-87 valid */
+	if (err_mask == 0)
+		id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+	return err_mask;
+}
+
 static struct scsi_host_template netcell_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations netcell_ops = {
 	.inherits	= &ata_bmdma_port_ops,
-	.cable_detect		= ata_cable_80wire,
+	.cable_detect	= ata_cable_80wire,
+	.read_id	= netcell_read_id,
 };
 
 
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 00000000000..11fb4ccc74b
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
+	.cable_detect		= ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *mem;
+	int ret;
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* remap drive's physical memory address */
+	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+	if (!mem)
+		return -ENOMEM;
+
+	/* request and activate power GPIO, IRQ GPIO */
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* reset the drive */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+	msleep(30);
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+	msleep(30);
+
+	/* setup the ata port */
+	ap = host->ports[0];
+	ap->ops	= &palmld_port_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+	/* memory mapping voodoo */
+	ap->ioaddr.cmd_addr = mem + 0x10;
+	ap->ioaddr.altstatus_addr = mem + 0xe;
+	ap->ioaddr.ctl_addr = mem + 0xe;
+
+	/* start the port */
+	ata_sff_std_ports(&ap->ioaddr);
+
+	/* activate host */
+	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+					&palmld_sht);
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+	return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+	struct ata_host *host = platform_get_drvdata(dev);
+
+	ata_host_detach(host);
+
+	/* power down the HDD */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+	return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.probe		= palmld_pata_probe,
+	.remove		= __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+	return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+	platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index c2e90e1fece..36b8629203b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry {
  * Description information bitdefs
  */
 enum {
+	CMD_DESC_RES = (1 << 11),
 	VENDOR_SPECIFIC_BIST = (1 << 10),
 	CMD_DESC_SNOOP_ENABLE = (1 << 9),
 	FPDMA_QUEUED_CMD = (1 << 8),
@@ -332,13 +333,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
 		dma_addr_t sg_addr = sg_dma_address(sg);
 		u32 sg_len = sg_dma_len(sg);
 
-		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
-			sg_addr, sg_len);
+		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+			(unsigned long long)sg_addr, sg_len);
 
 		/* warn if each s/g element is not dword aligned */
 		if (sg_addr & 0x03)
 			ata_port_printk(qc->ap, KERN_ERR,
-					"s/g addr unaligned : 0x%x\n", sg_addr);
+					"s/g addr unaligned : 0x%llx\n",
+					(unsigned long long)sg_addr);
 		if (sg_len & 0x03)
 			ata_port_printk(qc->ap, KERN_ERR,
 					"s/g len unaligned : 0x%x\n", sg_len);
@@ -387,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
 	void __iomem *hcr_base = host_priv->hcr_base;
 	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
 	struct command_desc *cd;
-	u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+	u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
 	u32 num_prde = 0;
 	u32 ttl_dwords = 0;
 	dma_addr_t cd_paddr;
@@ -840,7 +842,7 @@ issue_srst:
 
 	/* device reset/SRST is a control register update FIS, uses tag0 */
 	sata_fsl_setup_cmd_hdr_entry(pp, 0,
-				     SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+		SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
 
 	tf.ctl |= ATA_SRST;	/* setup SRST bit in taskfile control reg */
 	ata_tf_to_fis(&tf, pmp, 0, cfis);
@@ -886,7 +888,8 @@ issue_srst:
 	 * using ATA signature D2H register FIS to the host controller.
 	 */
 
-	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+				      0, 0, 5);
 
 	tf.ctl &= ~ATA_SRST;	/* 2nd H2D Ctl. register FIS */
 	ata_tf_to_fis(&tf, pmp, 0, cfis);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6cda12ba812..b2d11f300c3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -305,8 +305,8 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
 static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 
-static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
-				   unsigned long deadline);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline);
 static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
@@ -406,49 +406,82 @@ static struct scsi_host_template nv_swncq_sht = {
 	.slave_configure	= nv_swncq_slave_config,
 };
 
-static struct ata_port_operations nv_common_ops = {
+/*
+ * NV SATA controllers have various different problems with hardreset
+ * protocol depending on the specific controller and device.
+ *
+ * GENERIC:
+ *
+ *  bko11195 reports that link doesn't come online after hardreset on
+ *  generic nv's and there have been several other similar reports on
+ *  linux-ide.
+ *
+ *  bko12351#c23 reports that warmplug on MCP61 doesn't work with
+ *  softreset.
+ *
+ * NF2/3:
+ *
+ *  bko3352 reports nf2/3 controllers can't determine device signature
+ *  reliably after hardreset.  The following thread reports detection
+ *  failure on cold boot with the standard debouncing timing.
+ *
+ *  http://thread.gmane.org/gmane.linux.ide/34098
+ *
+ *  bko12176 reports that hardreset fails to bring up the link during
+ *  boot on nf2.
+ *
+ * CK804:
+ *
+ *  For initial probing after boot and hot plugging, hardreset mostly
+ *  works fine on CK804 but curiously, reprobing on the initial port
+ *  by rescanning or rmmod/insmod fails to acquire the initial D2H Reg
+ *  FIS in somewhat undeterministic way.
+ *
+ * SWNCQ:
+ *
+ *  bko12351 reports that when SWNCQ is enabled, for hotplug to work,
+ *  hardreset should be used and hardreset can't report proper
+ *  signature, which suggests that mcp5x is closer to nf2 as long as
+ *  reset quirkiness is concerned.
+ *
+ *  bko12703 reports that boot probing fails for intel SSD with
+ *  hardreset.  Link fails to come online.  Softreset works fine.
+ *
+ * The failures are varied but the following patterns seem true for
+ * all flavors.
+ *
+ * - Softreset during boot always works.
+ *
+ * - Hardreset during boot sometimes fails to bring up the link on
+ *   certain comibnations and device signature acquisition is
+ *   unreliable.
+ *
+ * - Hardreset is often necessary after hotplug.
+ *
+ * So, preferring softreset for boot probing and error handling (as
+ * hardreset might bring down the link) but using hardreset for
+ * post-boot probing should work around the above issues in most
+ * cases.  Define nv_hardreset() which only kicks in for post-boot
+ * probing and use it for all variants.
+ */
+static struct ata_port_operations nv_generic_ops = {
 	.inherits		= &ata_bmdma_port_ops,
 	.lost_interrupt		= ATA_OP_NULL,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
+	.hardreset		= nv_hardreset,
 };
 
-/* OSDL bz11195 reports that link doesn't come online after hardreset
- * on generic nv's and there have been several other similar reports
- * on linux-ide.  Disable hardreset for generic nv's.
- */
-static struct ata_port_operations nv_generic_ops = {
-	.inherits		= &nv_common_ops,
-	.hardreset		= ATA_OP_NULL,
-};
-
-/* nf2 is ripe with hardreset related problems.
- *
- * kernel bz#3352 reports nf2/3 controllers can't determine device
- * signature reliably.  The following thread reports detection failure
- * on cold boot with the standard debouncing timing.
- *
- * http://thread.gmane.org/gmane.linux.ide/34098
- *
- * And bz#12176 reports that hardreset simply doesn't work on nf2.
- * Give up on it and just don't do hardreset.
- */
 static struct ata_port_operations nv_nf2_ops = {
 	.inherits		= &nv_generic_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
 };
 
-/* For initial probing after boot and hot plugging, hardreset mostly
- * works fine on CK804 but curiously, reprobing on the initial port by
- * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS
- * in somewhat undeterministic way.  Use noclassify hardreset.
- */
 static struct ata_port_operations nv_ck804_ops = {
-	.inherits		= &nv_common_ops,
+	.inherits		= &nv_generic_ops,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
-	.hardreset		= nv_noclassify_hardreset,
 	.host_stop		= nv_ck804_host_stop,
 };
 
@@ -476,19 +509,8 @@ static struct ata_port_operations nv_adma_ops = {
 	.host_stop		= nv_adma_host_stop,
 };
 
-/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
- * work, hardreset should be used and hardreset can't report proper
- * signature, which suggests that mcp5x is closer to nf2 as long as
- * reset quirkiness is concerned.  Define separate ops for mcp5x with
- * nv_noclassify_hardreset().
- */
-static struct ata_port_operations nv_mcp5x_ops = {
-	.inherits		= &nv_common_ops,
-	.hardreset		= nv_noclassify_hardreset,
-};
-
 static struct ata_port_operations nv_swncq_ops = {
-	.inherits		= &nv_mcp5x_ops,
+	.inherits		= &nv_generic_ops,
 
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
@@ -557,7 +579,7 @@ static const struct ata_port_info nv_port_info[] = {
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
-		.port_ops	= &nv_mcp5x_ops,
+		.port_ops	= &nv_generic_ops,
 		.private_data	= NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
 	},
 	/* SWNCQ */
@@ -1559,15 +1581,24 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 	return 0;
 }
 
-static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
-				   unsigned long deadline)
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline)
 {
-	bool online;
-	int rc;
+	struct ata_eh_context *ehc = &link->eh_context;
 
-	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
-				 &online, NULL);
-	return online ? -EAGAIN : rc;
+	/* Do hardreset iff it's post-boot probing, please read the
+	 * comment above port ops for details.
+	 */
+	if (!(link->ap->pflags & ATA_PFLAG_LOADING) &&
+	    !ata_dev_enabled(link->device))
+		sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+				    NULL, NULL);
+	else if (!(ehc->i.flags & ATA_EHI_QUIET))
+		ata_link_printk(link, KERN_INFO,
+				"nv: skipping hardreset on occupied port\n");
+
+	/* device signature acquisition is unreliable */
+	return -EAGAIN;
 }
 
 static void nv_nf2_freeze(struct ata_port *ap)
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index e67ce8e5caa..030ec079b18 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -183,7 +183,7 @@ static struct scsi_host_template sil_sht = {
 };
 
 static struct ata_port_operations sil_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &ata_bmdma32_port_ops,
 	.dev_config		= sil_dev_config,
 	.set_mode		= sil_set_mode,
 	.bmdma_setup            = sil_bmdma_setup,
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index dce3dccced3..bbcf970068a 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -193,6 +193,7 @@ enum {
 					  PDC_TIMER_MASK_INT,
 };
 
+#define ECC_ERASE_BUF_SZ (128 * 1024)
 
 struct pdc_port_priv {
 	u8			dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512];
@@ -213,8 +214,9 @@ struct pdc_host_priv {
 
 
 static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
+static void pdc_freeze(struct ata_port *ap);
+static void pdc_thaw(struct ata_port *ap);
 static int pdc_port_start(struct ata_port *ap);
 static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -233,6 +235,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host,
 				 void *psource, u32 offset, u32 size);
 static void pdc20621_irq_clear(struct ata_port *ap);
 static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+			 unsigned long deadline);
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
 
 
 static struct scsi_host_template pdc_sata_sht = {
@@ -243,20 +249,24 @@ static struct scsi_host_template pdc_sata_sht = {
 
 /* TODO: inherit from base port_ops after converting to new EH */
 static struct ata_port_operations pdc_20621_ops = {
-	.sff_tf_load		= pdc_tf_load_mmio,
-	.sff_tf_read		= ata_sff_tf_read,
-	.sff_check_status	= ata_sff_check_status,
-	.sff_exec_command	= pdc_exec_command_mmio,
-	.sff_dev_select		= ata_sff_dev_select,
-	.phy_reset		= pdc_20621_phy_reset,
+	.inherits		= &ata_sff_port_ops,
+
+	.check_atapi_dma	= pdc_check_atapi_dma,
 	.qc_prep		= pdc20621_qc_prep,
 	.qc_issue		= pdc20621_qc_issue,
-	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
-	.sff_data_xfer		= ata_sff_data_xfer,
-	.eng_timeout		= pdc_eng_timeout,
-	.sff_irq_clear		= pdc20621_irq_clear,
-	.sff_irq_on		= ata_sff_irq_on,
+
+	.freeze			= pdc_freeze,
+	.thaw			= pdc_thaw,
+	.softreset		= pdc_softreset,
+	.error_handler		= pdc_error_handler,
+	.lost_interrupt		= ATA_OP_NULL,
+	.post_internal_cmd	= pdc_post_internal_cmd,
+
 	.port_start		= pdc_port_start,
+
+	.sff_tf_load		= pdc_tf_load_mmio,
+	.sff_exec_command	= pdc_exec_command_mmio,
+	.sff_irq_clear		= pdc20621_irq_clear,
 };
 
 static const struct ata_port_info pdc_port_info[] = {
@@ -310,14 +320,6 @@ static int pdc_port_start(struct ata_port *ap)
 	return 0;
 }
 
-static void pdc_20621_phy_reset(struct ata_port *ap)
-{
-	VPRINTK("ENTER\n");
-	ap->cbl = ATA_CBL_SATA;
-	ata_port_probe(ap);
-	ata_bus_reset(ap);
-}
-
 static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
 				   unsigned int portno,
 					   unsigned int total_len)
@@ -686,8 +688,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
 static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
 {
 	switch (qc->tf.protocol) {
-	case ATA_PROT_DMA:
 	case ATA_PROT_NODATA:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			break;
+		/*FALLTHROUGH*/
+	case ATA_PROT_DMA:
 		pdc20621_packet_start(qc);
 		return 0;
 
@@ -786,12 +791,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
 
 static void pdc20621_irq_clear(struct ata_port *ap)
 {
-	struct ata_host *host = ap->host;
-	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
-
-	mmio += PDC_CHIP0_OFS;
-
-	readl(mmio + PDC_20621_SEQMASK);
+	ioread8(ap->ioaddr.status_addr);
 }
 
 static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
@@ -859,46 +859,119 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
 	return IRQ_RETVAL(handled);
 }
 
-static void pdc_eng_timeout(struct ata_port *ap)
+static void pdc_freeze(struct ata_port *ap)
 {
-	u8 drv_stat;
-	struct ata_host *host = ap->host;
-	struct ata_queued_cmd *qc;
-	unsigned long flags;
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
+	u32 tmp;
 
-	DPRINTK("ENTER\n");
+	/* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
 
-	spin_lock_irqsave(&host->lock, flags);
+	tmp = readl(mmio + PDC_CTLSTAT);
+	tmp |= PDC_MASK_INT;
+	tmp &= ~PDC_DMA_ENABLE;
+	writel(tmp, mmio + PDC_CTLSTAT);
+	readl(mmio + PDC_CTLSTAT); /* flush */
+}
 
-	qc = ata_qc_from_tag(ap, ap->link.active_tag);
+static void pdc_thaw(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
+	u32 tmp;
 
-	switch (qc->tf.protocol) {
-	case ATA_PROT_DMA:
-	case ATA_PROT_NODATA:
-		ata_port_printk(ap, KERN_ERR, "command timeout\n");
-		qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
-		break;
+	/* FIXME: start HDMA engine, if zero ATA engines running */
 
-	default:
-		drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+	/* clear IRQ */
+	ioread8(ap->ioaddr.status_addr);
 
-		ata_port_printk(ap, KERN_ERR,
-				"unknown timeout, cmd 0x%x stat 0x%x\n",
-				qc->tf.command, drv_stat);
+	/* turn IRQ back on */
+	tmp = readl(mmio + PDC_CTLSTAT);
+	tmp &= ~PDC_MASK_INT;
+	writel(tmp, mmio + PDC_CTLSTAT);
+	readl(mmio + PDC_CTLSTAT); /* flush */
+}
 
-		qc->err_mask |= ac_err_mask(drv_stat);
-		break;
+static void pdc_reset_port(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+	unsigned int i;
+	u32 tmp;
+
+	/* FIXME: handle HDMA copy engine */
+
+	for (i = 11; i > 0; i--) {
+		tmp = readl(mmio);
+		if (tmp & PDC_RESET)
+			break;
+
+		udelay(100);
+
+		tmp |= PDC_RESET;
+		writel(tmp, mmio);
 	}
 
-	spin_unlock_irqrestore(&host->lock, flags);
-	ata_eh_qc_complete(qc);
-	DPRINTK("EXIT\n");
+	tmp &= ~PDC_RESET;
+	writel(tmp, mmio);
+	readl(mmio);	/* flush */
+}
+
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+			 unsigned long deadline)
+{
+	pdc_reset_port(link->ap);
+	return ata_sff_softreset(link, class, deadline);
+}
+
+static void pdc_error_handler(struct ata_port *ap)
+{
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		pdc_reset_port(ap);
+
+	ata_std_error_handler(ap);
+}
+
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	/* make DMA engine forget about the failed command */
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		pdc_reset_port(ap);
+}
+
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	u8 *scsicmd = qc->scsicmd->cmnd;
+	int pio = 1; /* atapi dma off by default */
+
+	/* Whitelist commands that may use DMA. */
+	switch (scsicmd[0]) {
+	case WRITE_12:
+	case WRITE_10:
+	case WRITE_6:
+	case READ_12:
+	case READ_10:
+	case READ_6:
+	case 0xad: /* READ_DVD_STRUCTURE */
+	case 0xbe: /* READ_CD */
+		pio = 0;
+	}
+	/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+	if (scsicmd[0] == WRITE_10) {
+		unsigned int lba =
+			(scsicmd[2] << 24) |
+			(scsicmd[3] << 16) |
+			(scsicmd[4] << 8) |
+			scsicmd[5];
+		if (lba >= 0xFFFF4FA2)
+			pio = 1;
+	}
+	return pio;
 }
 
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
-		tf->protocol == ATA_PROT_NODATA);
+		tf->protocol == ATAPI_PROT_DMA);
 	ata_sff_tf_load(ap, tf);
 }
 
@@ -906,7 +979,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
-		tf->protocol == ATA_PROT_NODATA);
+		tf->protocol == ATAPI_PROT_DMA);
 	ata_sff_exec_command(ap, tf);
 }
 
@@ -1208,7 +1281,6 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 {
 	int speed, size, length;
 	u32 addr, spd0, pci_status;
-	u32 tmp = 0;
 	u32 time_period = 0;
 	u32 tcount = 0;
 	u32 ticks = 0;
@@ -1323,14 +1395,17 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			  PDC_DIMM_SPD_TYPE, &spd0);
 	if (spd0 == 0x02) {
+		void *buf;
 		VPRINTK("Start ECC initialization\n");
 		addr = 0;
 		length = size * 1024 * 1024;
+		buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL);
 		while (addr < length) {
-			pdc20621_put_to_dimm(host, (void *) &tmp, addr,
-					     sizeof(u32));
-			addr += sizeof(u32);
+			pdc20621_put_to_dimm(host, buf, addr,
+					     ECC_ERASE_BUF_SZ);
+			addr += ECC_ERASE_BUF_SZ;
 		}
+		kfree(buf);
 		VPRINTK("Finish ECC initialization\n");
 	}
 	return 0;
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index dc030f1f00f..4b04a15146d 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -279,7 +279,7 @@ static struct device *next_device(struct klist_iter *i)
  *
  * NOTE: The device that returns a non-zero value is not retained
  * in any way, nor is its refcount incremented. If the caller needs
- * to retain this data, it should do, and increment the reference
+ * to retain this data, it should do so, and increment the reference
  * count in the supplied callback.
  */
 int bus_for_each_dev(struct bus_type *bus, struct device *start,
@@ -700,8 +700,10 @@ int bus_add_driver(struct device_driver *drv)
 	}
 
 	kobject_uevent(&priv->kobj, KOBJ_ADD);
-	return error;
+	return 0;
 out_unregister:
+	kfree(drv->p);
+	drv->p = NULL;
 	kobject_put(&priv->kobj);
 out_put_bus:
 	bus_put(bus);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 4aa527b8a91..1977d4beb89 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -879,7 +879,7 @@ int device_add(struct device *dev)
 	}
 
 	if (!dev_name(dev))
-		goto done;
+		goto name_error;
 
 	pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
 
@@ -978,6 +978,9 @@ done:
 	cleanup_device_parent(dev);
 	if (parent)
 		put_device(parent);
+name_error:
+	kfree(dev->p);
+	dev->p = NULL;
 	goto done;
 }
 
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index c51f11bb29a..8ae0f63602e 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -257,6 +257,10 @@ EXPORT_SYMBOL_GPL(driver_register);
  */
 void driver_unregister(struct device_driver *drv)
 {
+	if (!drv || !drv->p) {
+		WARN(1, "Unexpected driver unregister!\n");
+		return;
+	}
 	driver_remove_groups(drv, drv->groups);
 	bus_remove_driver(drv);
 }
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index d3a59c688fe..8a267c42762 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/mutex.h>
 #include <linux/kthread.h>
-
+#include <linux/highmem.h>
 #include <linux/firmware.h>
 #include "base.h"
 
@@ -45,7 +45,10 @@ struct firmware_priv {
 	struct bin_attribute attr_data;
 	struct firmware *fw;
 	unsigned long status;
-	int alloc_size;
+	struct page **pages;
+	int nr_pages;
+	int page_array_size;
+	const char *vdata;
 	struct timer_list timeout;
 };
 
@@ -122,6 +125,10 @@ static ssize_t firmware_loading_show(struct device *dev,
 	return sprintf(buf, "%d\n", loading);
 }
 
+/* Some architectures don't have PAGE_KERNEL_RO */
+#ifndef PAGE_KERNEL_RO
+#define PAGE_KERNEL_RO PAGE_KERNEL
+#endif
 /**
  * firmware_loading_store - set value in the 'loading' control file
  * @dev: device pointer
@@ -141,6 +148,7 @@ static ssize_t firmware_loading_store(struct device *dev,
 {
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
 	int loading = simple_strtol(buf, NULL, 10);
+	int i;
 
 	switch (loading) {
 	case 1:
@@ -151,13 +159,30 @@ static ssize_t firmware_loading_store(struct device *dev,
 		}
 		vfree(fw_priv->fw->data);
 		fw_priv->fw->data = NULL;
+		for (i = 0; i < fw_priv->nr_pages; i++)
+			__free_page(fw_priv->pages[i]);
+		kfree(fw_priv->pages);
+		fw_priv->pages = NULL;
+		fw_priv->page_array_size = 0;
+		fw_priv->nr_pages = 0;
 		fw_priv->fw->size = 0;
-		fw_priv->alloc_size = 0;
 		set_bit(FW_STATUS_LOADING, &fw_priv->status);
 		mutex_unlock(&fw_lock);
 		break;
 	case 0:
 		if (test_bit(FW_STATUS_LOADING, &fw_priv->status)) {
+			vfree(fw_priv->fw->data);
+			fw_priv->fw->data = vmap(fw_priv->pages,
+						 fw_priv->nr_pages,
+						 0, PAGE_KERNEL_RO);
+			if (!fw_priv->fw->data) {
+				dev_err(dev, "%s: vmap() failed\n", __func__);
+				goto err;
+			}
+			/* Pages will be freed by vfree() */
+			fw_priv->pages = NULL;
+			fw_priv->page_array_size = 0;
+			fw_priv->nr_pages = 0;
 			complete(&fw_priv->completion);
 			clear_bit(FW_STATUS_LOADING, &fw_priv->status);
 			break;
@@ -167,6 +192,7 @@ static ssize_t firmware_loading_store(struct device *dev,
 		dev_err(dev, "%s: unexpected value (%d)\n", __func__, loading);
 		/* fallthrough */
 	case -1:
+	err:
 		fw_load_abort(fw_priv);
 		break;
 	}
@@ -191,8 +217,28 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		ret_count = -ENODEV;
 		goto out;
 	}
-	ret_count = memory_read_from_buffer(buffer, count, &offset,
-						fw->data, fw->size);
+	if (offset > fw->size)
+		return 0;
+	if (count > fw->size - offset)
+		count = fw->size - offset;
+
+	ret_count = count;
+
+	while (count) {
+		void *page_data;
+		int page_nr = offset >> PAGE_SHIFT;
+		int page_ofs = offset & (PAGE_SIZE-1);
+		int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count);
+
+		page_data = kmap(fw_priv->pages[page_nr]);
+
+		memcpy(buffer, page_data + page_ofs, page_cnt);
+
+		kunmap(fw_priv->pages[page_nr]);
+		buffer += page_cnt;
+		offset += page_cnt;
+		count -= page_cnt;
+	}
 out:
 	mutex_unlock(&fw_lock);
 	return ret_count;
@@ -201,27 +247,39 @@ out:
 static int
 fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
 {
-	u8 *new_data;
-	int new_size = fw_priv->alloc_size;
+	int pages_needed = ALIGN(min_size, PAGE_SIZE) >> PAGE_SHIFT;
+
+	/* If the array of pages is too small, grow it... */
+	if (fw_priv->page_array_size < pages_needed) {
+		int new_array_size = max(pages_needed,
+					 fw_priv->page_array_size * 2);
+		struct page **new_pages;
+
+		new_pages = kmalloc(new_array_size * sizeof(void *),
+				    GFP_KERNEL);
+		if (!new_pages) {
+			fw_load_abort(fw_priv);
+			return -ENOMEM;
+		}
+		memcpy(new_pages, fw_priv->pages,
+		       fw_priv->page_array_size * sizeof(void *));
+		memset(&new_pages[fw_priv->page_array_size], 0, sizeof(void *) *
+		       (new_array_size - fw_priv->page_array_size));
+		kfree(fw_priv->pages);
+		fw_priv->pages = new_pages;
+		fw_priv->page_array_size = new_array_size;
+	}
 
-	if (min_size <= fw_priv->alloc_size)
-		return 0;
+	while (fw_priv->nr_pages < pages_needed) {
+		fw_priv->pages[fw_priv->nr_pages] =
+			alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
 
-	new_size = ALIGN(min_size, PAGE_SIZE);
-	new_data = vmalloc(new_size);
-	if (!new_data) {
-		printk(KERN_ERR "%s: unable to alloc buffer\n", __func__);
-		/* Make sure that we don't keep incomplete data */
-		fw_load_abort(fw_priv);
-		return -ENOMEM;
-	}
-	fw_priv->alloc_size = new_size;
-	if (fw_priv->fw->data) {
-		memcpy(new_data, fw_priv->fw->data, fw_priv->fw->size);
-		vfree(fw_priv->fw->data);
+		if (!fw_priv->pages[fw_priv->nr_pages]) {
+			fw_load_abort(fw_priv);
+			return -ENOMEM;
+		}
+		fw_priv->nr_pages++;
 	}
-	fw_priv->fw->data = new_data;
-	BUG_ON(min_size > fw_priv->alloc_size);
 	return 0;
 }
 
@@ -258,10 +316,25 @@ firmware_data_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 	if (retval)
 		goto out;
 
-	memcpy((u8 *)fw->data + offset, buffer, count);
-
-	fw->size = max_t(size_t, offset + count, fw->size);
 	retval = count;
+
+	while (count) {
+		void *page_data;
+		int page_nr = offset >> PAGE_SHIFT;
+		int page_ofs = offset & (PAGE_SIZE - 1);
+		int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count);
+
+		page_data = kmap(fw_priv->pages[page_nr]);
+
+		memcpy(page_data + page_ofs, buffer, page_cnt);
+
+		kunmap(fw_priv->pages[page_nr]);
+		buffer += page_cnt;
+		offset += page_cnt;
+		count -= page_cnt;
+	}
+
+	fw->size = max_t(size_t, offset, fw->size);
 out:
 	mutex_unlock(&fw_lock);
 	return retval;
@@ -277,7 +350,11 @@ static struct bin_attribute firmware_attr_data_tmpl = {
 static void fw_dev_release(struct device *dev)
 {
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	int i;
 
+	for (i = 0; i < fw_priv->nr_pages; i++)
+		__free_page(fw_priv->pages[i]);
+	kfree(fw_priv->pages);
 	kfree(fw_priv);
 	kfree(dev);
 
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 8b4708e0624..ead3f64c41d 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -469,22 +469,6 @@ static void platform_drv_shutdown(struct device *_dev)
 	drv->shutdown(dev);
 }
 
-static int platform_drv_suspend(struct device *_dev, pm_message_t state)
-{
-	struct platform_driver *drv = to_platform_driver(_dev->driver);
-	struct platform_device *dev = to_platform_device(_dev);
-
-	return drv->suspend(dev, state);
-}
-
-static int platform_drv_resume(struct device *_dev)
-{
-	struct platform_driver *drv = to_platform_driver(_dev->driver);
-	struct platform_device *dev = to_platform_device(_dev);
-
-	return drv->resume(dev);
-}
-
 /**
  * platform_driver_register
  * @drv: platform driver structure
@@ -498,10 +482,10 @@ int platform_driver_register(struct platform_driver *drv)
 		drv->driver.remove = platform_drv_remove;
 	if (drv->shutdown)
 		drv->driver.shutdown = platform_drv_shutdown;
-	if (drv->suspend)
-		drv->driver.suspend = platform_drv_suspend;
-	if (drv->resume)
-		drv->driver.resume = platform_drv_resume;
+	if (drv->suspend || drv->resume)
+		pr_warning("Platform driver '%s' needs updating - please use "
+			"dev_pm_ops\n", drv->driver.name);
+
 	return driver_register(&drv->driver);
 }
 EXPORT_SYMBOL_GPL(platform_driver_register);
@@ -633,10 +617,12 @@ static int platform_match(struct device *dev, struct device_driver *drv)
 
 static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
+	struct platform_driver *pdrv = to_platform_driver(dev->driver);
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret = 0;
 
-	if (dev->driver && dev->driver->suspend)
-		ret = dev->driver->suspend(dev, mesg);
+	if (dev->driver && pdrv->suspend)
+		ret = pdrv->suspend(pdev, mesg);
 
 	return ret;
 }
@@ -667,10 +653,12 @@ static int platform_legacy_resume_early(struct device *dev)
 
 static int platform_legacy_resume(struct device *dev)
 {
+	struct platform_driver *pdrv = to_platform_driver(dev->driver);
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret = 0;
 
-	if (dev->driver && dev->driver->resume)
-		ret = dev->driver->resume(dev);
+	if (dev->driver && pdrv->resume)
+		ret = pdrv->resume(pdev);
 
 	return ret;
 }
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 69b4ddb7de3..fae72545898 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -315,13 +315,13 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
 /*------------------------- Resume routines -------------------------*/
 
 /**
- *	resume_device_noirq - Power on one device (early resume).
+ *	device_resume_noirq - Power on one device (early resume).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	Must be called with interrupts disabled.
  */
-static int resume_device_noirq(struct device *dev, pm_message_t state)
+static int device_resume_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -334,9 +334,6 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "EARLY ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->resume_early) {
-		pm_dev_dbg(dev, state, "legacy EARLY ");
-		error = dev->bus->resume_early(dev);
 	}
  End:
 	TRACE_RESUME(error);
@@ -344,50 +341,40 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 }
 
 /**
- *	dpm_power_up - Power on all regular (non-sysdev) devices.
+ *	dpm_resume_noirq - Power on all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Execute the appropriate "noirq resume" callback for all devices marked
- *	as DPM_OFF_IRQ.
+ *	Call the "noirq" resume handlers for all devices marked as
+ *	DPM_OFF_IRQ and enable device drivers to receive interrupts.
  *
  *	Must be called under dpm_list_mtx.  Device drivers should not receive
  *	interrupts while it's being executed.
  */
-static void dpm_power_up(pm_message_t state)
+void dpm_resume_noirq(pm_message_t state)
 {
 	struct device *dev;
 
+	mutex_lock(&dpm_list_mtx);
 	list_for_each_entry(dev, &dpm_list, power.entry)
 		if (dev->power.status > DPM_OFF) {
 			int error;
 
 			dev->power.status = DPM_OFF;
-			error = resume_device_noirq(dev, state);
+			error = device_resume_noirq(dev, state);
 			if (error)
 				pm_dev_err(dev, state, " early", error);
 		}
-}
-
-/**
- *	device_power_up - Turn on all devices that need special attention.
- *	@state: PM transition of the system being carried out.
- *
- *	Call the "early" resume handlers and enable device drivers to receive
- *	interrupts.
- */
-void device_power_up(pm_message_t state)
-{
-	dpm_power_up(state);
+	mutex_unlock(&dpm_list_mtx);
 	resume_device_irqs();
 }
-EXPORT_SYMBOL_GPL(device_power_up);
+EXPORT_SYMBOL_GPL(dpm_resume_noirq);
 
 /**
- *	resume_device - Restore state for one device.
+ *	device_resume - Restore state for one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int resume_device(struct device *dev, pm_message_t state)
+static int device_resume(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -412,9 +399,6 @@ static int resume_device(struct device *dev, pm_message_t state)
 		if (dev->type->pm) {
 			pm_dev_dbg(dev, state, "type ");
 			error = pm_op(dev, dev->type->pm, state);
-		} else if (dev->type->resume) {
-			pm_dev_dbg(dev, state, "legacy type ");
-			error = dev->type->resume(dev);
 		}
 		if (error)
 			goto End;
@@ -460,7 +444,7 @@ static void dpm_resume(pm_message_t state)
 			dev->power.status = DPM_RESUMING;
 			mutex_unlock(&dpm_list_mtx);
 
-			error = resume_device(dev, state);
+			error = device_resume(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 			if (error)
@@ -478,11 +462,11 @@ static void dpm_resume(pm_message_t state)
 }
 
 /**
- *	complete_device - Complete a PM transition for given device
+ *	device_complete - Complete a PM transition for given device
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static void complete_device(struct device *dev, pm_message_t state)
+static void device_complete(struct device *dev, pm_message_t state)
 {
 	down(&dev->sem);
 
@@ -525,7 +509,7 @@ static void dpm_complete(pm_message_t state)
 			dev->power.status = DPM_ON;
 			mutex_unlock(&dpm_list_mtx);
 
-			complete_device(dev, state);
+			device_complete(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 		}
@@ -538,19 +522,19 @@ static void dpm_complete(pm_message_t state)
 }
 
 /**
- *	device_resume - Restore state of each device in system.
+ *	dpm_resume_end - Restore state of each device in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Resume all the devices, unlock them all, and allow new
  *	devices to be registered once again.
  */
-void device_resume(pm_message_t state)
+void dpm_resume_end(pm_message_t state)
 {
 	might_sleep();
 	dpm_resume(state);
 	dpm_complete(state);
 }
-EXPORT_SYMBOL_GPL(device_resume);
+EXPORT_SYMBOL_GPL(dpm_resume_end);
 
 
 /*------------------------- Suspend routines -------------------------*/
@@ -575,13 +559,13 @@ static pm_message_t resume_event(pm_message_t sleep_state)
 }
 
 /**
- *	suspend_device_noirq - Shut down one device (late suspend).
+ *	device_suspend_noirq - Shut down one device (late suspend).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	This is called with interrupts off and only a single CPU running.
  */
-static int suspend_device_noirq(struct device *dev, pm_message_t state)
+static int device_suspend_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -591,49 +575,47 @@ static int suspend_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "LATE ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->suspend_late) {
-		pm_dev_dbg(dev, state, "legacy LATE ");
-		error = dev->bus->suspend_late(dev, state);
-		suspend_report_result(dev->bus->suspend_late, error);
 	}
 	return error;
 }
 
 /**
- *	device_power_down - Shut down special devices.
+ *	dpm_suspend_noirq - Power down all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Prevent device drivers from receiving interrupts and call the "late"
+ *	Prevent device drivers from receiving interrupts and call the "noirq"
  *	suspend handlers.
  *
  *	Must be called under dpm_list_mtx.
  */
-int device_power_down(pm_message_t state)
+int dpm_suspend_noirq(pm_message_t state)
 {
 	struct device *dev;
 	int error = 0;
 
 	suspend_device_irqs();
+	mutex_lock(&dpm_list_mtx);
 	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
-		error = suspend_device_noirq(dev, state);
+		error = device_suspend_noirq(dev, state);
 		if (error) {
 			pm_dev_err(dev, state, " late", error);
 			break;
 		}
 		dev->power.status = DPM_OFF_IRQ;
 	}
+	mutex_unlock(&dpm_list_mtx);
 	if (error)
-		device_power_up(resume_event(state));
+		dpm_resume_noirq(resume_event(state));
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(dpm_suspend_noirq);
 
 /**
- *	suspend_device - Save state of one device.
+ *	device_suspend - Save state of one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int suspend_device(struct device *dev, pm_message_t state)
+static int device_suspend(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -656,10 +638,6 @@ static int suspend_device(struct device *dev, pm_message_t state)
 		if (dev->type->pm) {
 			pm_dev_dbg(dev, state, "type ");
 			error = pm_op(dev, dev->type->pm, state);
-		} else if (dev->type->suspend) {
-			pm_dev_dbg(dev, state, "legacy type ");
-			error = dev->type->suspend(dev, state);
-			suspend_report_result(dev->type->suspend, error);
 		}
 		if (error)
 			goto End;
@@ -700,7 +678,7 @@ static int dpm_suspend(pm_message_t state)
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
 
-		error = suspend_device(dev, state);
+		error = device_suspend(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -719,11 +697,11 @@ static int dpm_suspend(pm_message_t state)
 }
 
 /**
- *	prepare_device - Execute the ->prepare() callback(s) for given device.
+ *	device_prepare - Execute the ->prepare() callback(s) for given device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int prepare_device(struct device *dev, pm_message_t state)
+static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -777,7 +755,7 @@ static int dpm_prepare(pm_message_t state)
 		dev->power.status = DPM_PREPARING;
 		mutex_unlock(&dpm_list_mtx);
 
-		error = prepare_device(dev, state);
+		error = device_prepare(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -803,12 +781,12 @@ static int dpm_prepare(pm_message_t state)
 }
 
 /**
- *	device_suspend - Save state and stop all devices in system.
+ *	dpm_suspend_start - Save state and stop all devices in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Prepare and suspend all devices.
  */
-int device_suspend(pm_message_t state)
+int dpm_suspend_start(pm_message_t state)
 {
 	int error;
 
@@ -818,7 +796,7 @@ int device_suspend(pm_message_t state)
 		error = dpm_suspend(state);
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_suspend);
+EXPORT_SYMBOL_GPL(dpm_suspend_start);
 
 void __suspend_report_result(const char *function, void *fn, int ret)
 {
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 3236b434b96..9742a78c9fe 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -343,11 +343,15 @@ static void __sysdev_resume(struct sys_device *dev)
 	/* First, call the class-specific one */
 	if (cls->resume)
 		cls->resume(dev);
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled after %pF\n", cls->resume);
 
 	/* Call auxillary drivers next. */
 	list_for_each_entry(drv, &cls->drivers, entry) {
 		if (drv->resume)
 			drv->resume(dev);
+		WARN_ONCE(!irqs_disabled(),
+			"Interrupts enabled after %pF\n", drv->resume);
 	}
 }
 
@@ -377,6 +381,9 @@ int sysdev_suspend(pm_message_t state)
 	if (ret)
 		return ret;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while suspending system devices\n");
+
 	pr_debug("Suspending System Devices\n");
 
 	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
@@ -393,6 +400,9 @@ int sysdev_suspend(pm_message_t state)
 					if (ret)
 						goto aux_driver;
 				}
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					drv->suspend);
 			}
 
 			/* Now call the generic one */
@@ -400,6 +410,9 @@ int sysdev_suspend(pm_message_t state)
 				ret = cls->suspend(sysdev, state);
 				if (ret)
 					goto cls_driver;
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					cls->suspend);
 			}
 		}
 	}
@@ -452,6 +465,9 @@ int sysdev_resume(void)
 {
 	struct sysdev_class *cls;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while resuming system devices\n");
+
 	pr_debug("Resuming System Devices\n");
 
 	list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index f22ed6cc69f..668dc234b8e 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -3321,7 +3321,7 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_
 	DAC960_Command_T *Command;
 
    while(1) {
-	Request = elv_next_request(req_q);
+	Request = blk_peek_request(req_q);
 	if (!Request)
 		return 1;
 
@@ -3338,10 +3338,10 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_
 	}
 	Command->Completion = Request->end_io_data;
 	Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
-	Command->BlockNumber = Request->sector;
-	Command->BlockCount = Request->nr_sectors;
+	Command->BlockNumber = blk_rq_pos(Request);
+	Command->BlockCount = blk_rq_sectors(Request);
 	Command->Request = Request;
-	blkdev_dequeue_request(Request);
+	blk_start_request(Request);
 	Command->SegmentCount = blk_rq_map_sg(req_q,
 		  Command->Request, Command->cmd_sglist);
 	/* pci_map_sg MAY change the value of SegCount */
@@ -3431,7 +3431,7 @@ static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
    * successfully as possible.
    */
   Command->SegmentCount = 1;
-  Command->BlockNumber = Request->sector;
+  Command->BlockNumber = blk_rq_pos(Request);
   Command->BlockCount = 1;
   DAC960_QueueReadWriteCommand(Command);
   return;
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ddea8e485cc..bb72ada9f07 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -112,7 +112,7 @@ config GDROM
 	  with up to 1 GB of data. This drive will also read standard CD ROM
 	  disks. Select this option to access any disks in your GD ROM drive.
 	  Most users will want to say "Y" here.
-	  You can also build this as a module which will be called gdrom.ko
+	  You can also build this as a module which will be called gdrom.
 
 source "drivers/block/paride/Kconfig"
 
@@ -412,7 +412,7 @@ config ATA_OVER_ETH
 
 config MG_DISK
 	tristate "mGine mflash, gflash support"
-	depends on ARM && ATA && GPIOLIB
+	depends on ARM && GPIOLIB
 	help
 	  mGine mFlash(gFlash) block device driver
 
@@ -438,7 +438,7 @@ source "drivers/s390/block/Kconfig"
 
 config XILINX_SYSACE
 	tristate "Xilinx SystemACE support"
-	depends on 4xx
+	depends on 4xx || MICROBLAZE
 	help
 	  Include support for the Xilinx SystemACE CompactFlash interface
 
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 8df436ff706..9c6e5b0fe89 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -112,8 +112,6 @@ module_param(fd_def_df0, ulong, 0);
 MODULE_LICENSE("GPL");
 
 static struct request_queue *floppy_queue;
-#define QUEUE (floppy_queue)
-#define CURRENT elv_next_request(floppy_queue)
 
 /*
  *  Macros
@@ -1335,64 +1333,60 @@ static int get_track(int drive, int track)
 
 static void redo_fd_request(void)
 {
+	struct request *rq;
 	unsigned int cnt, block, track, sector;
 	int drive;
 	struct amiga_floppy_struct *floppy;
 	char *data;
 	unsigned long flags;
+	int err;
 
- repeat:
-	if (!CURRENT) {
+next_req:
+	rq = blk_fetch_request(floppy_queue);
+	if (!rq) {
 		/* Nothing left to do */
 		return;
 	}
 
-	floppy = CURRENT->rq_disk->private_data;
+	floppy = rq->rq_disk->private_data;
 	drive = floppy - unit;
 
+next_segment:
 	/* Here someone could investigate to be more efficient */
-	for (cnt = 0; cnt < CURRENT->current_nr_sectors; cnt++) { 
+	for (cnt = 0, err = 0; cnt < blk_rq_cur_sectors(rq); cnt++) {
 #ifdef DEBUG
 		printk("fd: sector %ld + %d requested for %s\n",
-		       CURRENT->sector,cnt,
-		       (rq_data_dir(CURRENT) == READ) ? "read" : "write");
+		       blk_rq_pos(rq), cnt,
+		       (rq_data_dir(rq) == READ) ? "read" : "write");
 #endif
-		block = CURRENT->sector + cnt;
+		block = blk_rq_pos(rq) + cnt;
 		if ((int)block > floppy->blocks) {
-			end_request(CURRENT, 0);
-			goto repeat;
+			err = -EIO;
+			break;
 		}
 
 		track = block / (floppy->dtype->sects * floppy->type->sect_mult);
 		sector = block % (floppy->dtype->sects * floppy->type->sect_mult);
-		data = CURRENT->buffer + 512 * cnt;
+		data = rq->buffer + 512 * cnt;
 #ifdef DEBUG
 		printk("access to track %d, sector %d, with buffer at "
 		       "0x%08lx\n", track, sector, data);
 #endif
 
-		if ((rq_data_dir(CURRENT) != READ) && (rq_data_dir(CURRENT) != WRITE)) {
-			printk(KERN_WARNING "do_fd_request: unknown command\n");
-			end_request(CURRENT, 0);
-			goto repeat;
-		}
 		if (get_track(drive, track) == -1) {
-			end_request(CURRENT, 0);
-			goto repeat;
+			err = -EIO;
+			break;
 		}
 
-		switch (rq_data_dir(CURRENT)) {
-		case READ:
+		if (rq_data_dir(rq) == READ) {
 			memcpy(data, floppy->trackbuf + sector * 512, 512);
-			break;
-
-		case WRITE:
+		} else {
 			memcpy(floppy->trackbuf + sector * 512, data, 512);
 
 			/* keep the drive spinning while writes are scheduled */
 			if (!fd_motor_on(drive)) {
-				end_request(CURRENT, 0);
-				goto repeat;
+				err = -EIO;
+				break;
 			}
 			/*
 			 * setup a callback to write the track buffer
@@ -1404,14 +1398,12 @@ static void redo_fd_request(void)
 		        /* reset the timer */
 			mod_timer (flush_track_timer + drive, jiffies + 1);
 			local_irq_restore(flags);
-			break;
 		}
 	}
-	CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
-	CURRENT->sector += CURRENT->current_nr_sectors;
 
-	end_request(CURRENT, 1);
-	goto repeat;
+	if (__blk_end_request_cur(rq, err))
+		goto next_segment;
+	goto next_req;
 }
 
 static void do_fd_request(struct request_queue * q)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 4234c11c1e4..f5e7180d7f4 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -79,9 +79,7 @@
 #undef DEBUG
 
 static struct request_queue *floppy_queue;
-
-#define QUEUE (floppy_queue)
-#define CURRENT elv_next_request(floppy_queue)
+static struct request *fd_request;
 
 /* Disk types: DD, HD, ED */
 static struct atari_disk_type {
@@ -376,6 +374,12 @@ static DEFINE_TIMER(readtrack_timer, fd_readtrack_check, 0, 0);
 static DEFINE_TIMER(timeout_timer, fd_times_out, 0, 0);
 static DEFINE_TIMER(fd_timer, check_change, 0, 0);
 	
+static void fd_end_request_cur(int err)
+{
+	if (!__blk_end_request_cur(fd_request, err))
+		fd_request = NULL;
+}
+
 static inline void start_motor_off_timer(void)
 {
 	mod_timer(&motor_off_timer, jiffies + FD_MOTOR_OFF_DELAY);
@@ -606,15 +610,15 @@ static void fd_error( void )
 		return;
 	}
 
-	if (!CURRENT)
+	if (!fd_request)
 		return;
 
-	CURRENT->errors++;
-	if (CURRENT->errors >= MAX_ERRORS) {
+	fd_request->errors++;
+	if (fd_request->errors >= MAX_ERRORS) {
 		printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
-		end_request(CURRENT, 0);
+		fd_end_request_cur(-EIO);
 	}
-	else if (CURRENT->errors == RECALIBRATE_ERRORS) {
+	else if (fd_request->errors == RECALIBRATE_ERRORS) {
 		printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
 		if (SelectedDrive != -1)
 			SUD.track = -1;
@@ -725,16 +729,14 @@ static void do_fd_action( int drive )
 	    if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
 		if (ReqCmd == READ) {
 		    copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
-		    if (++ReqCnt < CURRENT->current_nr_sectors) {
+		    if (++ReqCnt < blk_rq_cur_sectors(fd_request)) {
 			/* read next sector */
 			setup_req_params( drive );
 			goto repeat;
 		    }
 		    else {
 			/* all sectors finished */
-			CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
-			CURRENT->sector += CURRENT->current_nr_sectors;
-			end_request(CURRENT, 1);
+			fd_end_request_cur(0);
 			redo_fd_request();
 			return;
 		    }
@@ -1132,16 +1134,14 @@ static void fd_rwsec_done1(int status)
 		}
 	}
   
-	if (++ReqCnt < CURRENT->current_nr_sectors) {
+	if (++ReqCnt < blk_rq_cur_sectors(fd_request)) {
 		/* read next sector */
 		setup_req_params( SelectedDrive );
 		do_fd_action( SelectedDrive );
 	}
 	else {
 		/* all sectors finished */
-		CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
-		CURRENT->sector += CURRENT->current_nr_sectors;
-		end_request(CURRENT, 1);
+		fd_end_request_cur(0);
 		redo_fd_request();
 	}
 	return;
@@ -1382,7 +1382,7 @@ static void setup_req_params( int drive )
 	ReqData = ReqBuffer + 512 * ReqCnt;
 
 	if (UseTrackbuffer)
-		read_track = (ReqCmd == READ && CURRENT->errors == 0);
+		read_track = (ReqCmd == READ && fd_request->errors == 0);
 	else
 		read_track = 0;
 
@@ -1396,25 +1396,27 @@ static void redo_fd_request(void)
 	int drive, type;
 	struct atari_floppy_struct *floppy;
 
-	DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n",
-		CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "",
-		CURRENT ? CURRENT->sector : 0 ));
+	DPRINT(("redo_fd_request: fd_request=%p dev=%s fd_request->sector=%ld\n",
+		fd_request, fd_request ? fd_request->rq_disk->disk_name : "",
+		fd_request ? blk_rq_pos(fd_request) : 0 ));
 
 	IsFormatting = 0;
 
 repeat:
+	if (!fd_request) {
+		fd_request = blk_fetch_request(floppy_queue);
+		if (!fd_request)
+			goto the_end;
+	}
 
-	if (!CURRENT)
-		goto the_end;
-
-	floppy = CURRENT->rq_disk->private_data;
+	floppy = fd_request->rq_disk->private_data;
 	drive = floppy - unit;
 	type = floppy->type;
 	
 	if (!UD.connected) {
 		/* drive not connected */
 		printk(KERN_ERR "Unknown Device: fd%d\n", drive );
-		end_request(CURRENT, 0);
+		fd_end_request_cur(-EIO);
 		goto repeat;
 	}
 		
@@ -1430,12 +1432,12 @@ repeat:
 		/* user supplied disk type */
 		if (--type >= NUM_DISK_MINORS) {
 			printk(KERN_WARNING "fd%d: invalid disk format", drive );
-			end_request(CURRENT, 0);
+			fd_end_request_cur(-EIO);
 			goto repeat;
 		}
 		if (minor2disktype[type].drive_types > DriveType)  {
 			printk(KERN_WARNING "fd%d: unsupported disk format", drive );
-			end_request(CURRENT, 0);
+			fd_end_request_cur(-EIO);
 			goto repeat;
 		}
 		type = minor2disktype[type].index;
@@ -1444,8 +1446,8 @@ repeat:
 		UD.autoprobe = 0;
 	}
 	
-	if (CURRENT->sector + 1 > UDT->blocks) {
-		end_request(CURRENT, 0);
+	if (blk_rq_pos(fd_request) + 1 > UDT->blocks) {
+		fd_end_request_cur(-EIO);
 		goto repeat;
 	}
 
@@ -1453,9 +1455,9 @@ repeat:
 	del_timer( &motor_off_timer );
 		
 	ReqCnt = 0;
-	ReqCmd = rq_data_dir(CURRENT);
-	ReqBlock = CURRENT->sector;
-	ReqBuffer = CURRENT->buffer;
+	ReqCmd = rq_data_dir(fd_request);
+	ReqBlock = blk_rq_pos(fd_request);
+	ReqBuffer = fd_request->buffer;
 	setup_req_params( drive );
 	do_fd_action( drive );
 
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 5f7e64ba87e..4bf8705b3ac 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -407,12 +407,7 @@ static int __init ramdisk_size(char *str)
 	rd_size = simple_strtol(str, NULL, 0);
 	return 1;
 }
-static int __init ramdisk_size2(char *str)
-{
-	return ramdisk_size(str);
-}
-__setup("ramdisk=", ramdisk_size);
-__setup("ramdisk_size=", ramdisk_size2);
+__setup("ramdisk_size=", ramdisk_size);
 #endif
 
 /*
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 4d4d5e0d3fa..b22cec97ea1 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -180,11 +180,13 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
 					   __u32);
 static void start_io(ctlr_info_t *h);
 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
-		   unsigned int use_unit_num, unsigned int log_unit,
 		   __u8 page_code, unsigned char *scsi3addr, int cmd_type);
 static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
-			   unsigned int use_unit_num, unsigned int log_unit,
-			   __u8 page_code, int cmd_type);
+			__u8 page_code, unsigned char scsi3addr[],
+			int cmd_type);
+static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
+	int attempt_retry);
+static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
 
 static void fail_all_cmds(unsigned long ctlr);
 static int scan_thread(void *data);
@@ -437,6 +439,194 @@ static void __devinit cciss_procinit(int i)
 }
 #endif				/* CONFIG_PROC_FS */
 
+#define MAX_PRODUCT_NAME_LEN 19
+
+#define to_hba(n) container_of(n, struct ctlr_info, dev)
+#define to_drv(n) container_of(n, drive_info_struct, dev)
+
+static struct device_type cciss_host_type = {
+	.name		= "cciss_host",
+};
+
+static ssize_t dev_show_unique_id(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	__u8 sn[16];
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring)
+		ret = -EBUSY;
+	else
+		memcpy(sn, drv->serial_no, sizeof(sn));
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+	if (ret)
+		return ret;
+	else
+		return snprintf(buf, 16 * 2 + 2,
+				"%02X%02X%02X%02X%02X%02X%02X%02X"
+				"%02X%02X%02X%02X%02X%02X%02X%02X\n",
+				sn[0], sn[1], sn[2], sn[3],
+				sn[4], sn[5], sn[6], sn[7],
+				sn[8], sn[9], sn[10], sn[11],
+				sn[12], sn[13], sn[14], sn[15]);
+}
+DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
+
+static ssize_t dev_show_vendor(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	char vendor[VENDOR_LEN + 1];
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring)
+		ret = -EBUSY;
+	else
+		memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+	if (ret)
+		return ret;
+	else
+		return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
+}
+DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
+
+static ssize_t dev_show_model(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	char model[MODEL_LEN + 1];
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring)
+		ret = -EBUSY;
+	else
+		memcpy(model, drv->model, MODEL_LEN + 1);
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+	if (ret)
+		return ret;
+	else
+		return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
+}
+DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
+
+static ssize_t dev_show_rev(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	char rev[REV_LEN + 1];
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring)
+		ret = -EBUSY;
+	else
+		memcpy(rev, drv->rev, REV_LEN + 1);
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+	if (ret)
+		return ret;
+	else
+		return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
+}
+DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
+
+static struct attribute *cciss_dev_attrs[] = {
+	&dev_attr_unique_id.attr,
+	&dev_attr_model.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_rev.attr,
+	NULL
+};
+
+static struct attribute_group cciss_dev_attr_group = {
+	.attrs = cciss_dev_attrs,
+};
+
+static struct attribute_group *cciss_dev_attr_groups[] = {
+	&cciss_dev_attr_group,
+	NULL
+};
+
+static struct device_type cciss_dev_type = {
+	.name		= "cciss_device",
+	.groups		= cciss_dev_attr_groups,
+};
+
+static struct bus_type cciss_bus_type = {
+	.name		= "cciss",
+};
+
+
+/*
+ * Initialize sysfs entry for each controller.  This sets up and registers
+ * the 'cciss#' directory for each individual controller under
+ * /sys/bus/pci/devices/<dev>/.
+ */
+static int cciss_create_hba_sysfs_entry(struct ctlr_info *h)
+{
+	device_initialize(&h->dev);
+	h->dev.type = &cciss_host_type;
+	h->dev.bus = &cciss_bus_type;
+	dev_set_name(&h->dev, "%s", h->devname);
+	h->dev.parent = &h->pdev->dev;
+
+	return device_add(&h->dev);
+}
+
+/*
+ * Remove sysfs entries for an hba.
+ */
+static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
+{
+	device_del(&h->dev);
+}
+
+/*
+ * Initialize sysfs for each logical drive.  This sets up and registers
+ * the 'c#d#' directory for each individual logical drive under
+ * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
+ * /sys/block/cciss!c#d# to this entry.
+ */
+static int cciss_create_ld_sysfs_entry(struct ctlr_info *h,
+				       drive_info_struct *drv,
+				       int drv_index)
+{
+	device_initialize(&drv->dev);
+	drv->dev.type = &cciss_dev_type;
+	drv->dev.bus = &cciss_bus_type;
+	dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index);
+	drv->dev.parent = &h->dev;
+	return device_add(&drv->dev);
+}
+
+/*
+ * Remove sysfs entries for a logical drive.
+ */
+static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv)
+{
+	device_del(&drv->dev);
+}
+
 /*
  * For operations that cannot sleep, a command block is allocated at init,
  * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
@@ -1299,7 +1489,6 @@ static void cciss_softirq_done(struct request *rq)
 {
 	CommandList_struct *cmd = rq->completion_data;
 	ctlr_info_t *h = hba[cmd->ctlr];
-	unsigned int nr_bytes;
 	unsigned long flags;
 	u64bit temp64;
 	int i, ddir;
@@ -1321,15 +1510,11 @@ static void cciss_softirq_done(struct request *rq)
 	printk("Done with %p\n", rq);
 #endif				/* CCISS_DEBUG */
 
-	/*
-	 * Store the full size and set the residual count for pc requests
-	 */
-	nr_bytes = blk_rq_bytes(rq);
+	/* set the residual count for pc requests */
 	if (blk_pc_request(rq))
-		rq->data_len = cmd->err_info->ResidualCnt;
+		rq->resid_len = cmd->err_info->ResidualCnt;
 
-	if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, nr_bytes))
-		BUG();
+	blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
 
 	spin_lock_irqsave(&h->lock, flags);
 	cmd_free(h, cmd, 1);
@@ -1337,6 +1522,56 @@ static void cciss_softirq_done(struct request *rq)
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
+static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[],
+	uint32_t log_unit)
+{
+	log_unit = h->drv[log_unit].LunID & 0x03fff;
+	memset(&scsi3addr[4], 0, 4);
+	memcpy(&scsi3addr[0], &log_unit, 4);
+	scsi3addr[3] |= 0x40;
+}
+
+/* This function gets the SCSI vendor, model, and revision of a logical drive
+ * via the inquiry page 0.  Model, vendor, and rev are set to empty strings if
+ * they cannot be read.
+ */
+static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
+				   char *vendor, char *model, char *rev)
+{
+	int rc;
+	InquiryData_struct *inq_buf;
+	unsigned char scsi3addr[8];
+
+	*vendor = '\0';
+	*model = '\0';
+	*rev = '\0';
+
+	inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+	if (!inq_buf)
+		return;
+
+	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
+	if (withirq)
+		rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf,
+			     sizeof(InquiryData_struct), 0,
+				scsi3addr, TYPE_CMD);
+	else
+		rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf,
+			     sizeof(InquiryData_struct), 0,
+				scsi3addr, TYPE_CMD);
+	if (rc == IO_OK) {
+		memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
+		vendor[VENDOR_LEN] = '\0';
+		memcpy(model, &inq_buf->data_byte[16], MODEL_LEN);
+		model[MODEL_LEN] = '\0';
+		memcpy(rev, &inq_buf->data_byte[32], REV_LEN);
+		rev[REV_LEN] = '\0';
+	}
+
+	kfree(inq_buf);
+	return;
+}
+
 /* This function gets the serial number of a logical drive via
  * inquiry page 0x83.  Serial no. is 16 bytes.  If the serial
  * number cannot be had, for whatever reason, 16 bytes of 0xff
@@ -1348,6 +1583,7 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
 #define PAGE_83_INQ_BYTES 64
 	int rc;
 	unsigned char *buf;
+	unsigned char scsi3addr[8];
 
 	if (buflen > 16)
 		buflen = 16;
@@ -1356,12 +1592,13 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
 	if (!buf)
 		return;
 	memset(serial_no, 0, buflen);
+	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
 	if (withirq)
 		rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
-			PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD);
+			PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
 	else
 		rc = sendcmd(CISS_INQUIRY, ctlr, buf,
-			PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD);
+			PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
 	if (rc == IO_OK)
 		memcpy(serial_no, &buf[8], buflen);
 	kfree(buf);
@@ -1377,7 +1614,7 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
 	disk->first_minor = drv_index << NWD_SHIFT;
 	disk->fops = &cciss_fops;
 	disk->private_data = &h->drv[drv_index];
-	disk->driverfs_dev = &h->pdev->dev;
+	disk->driverfs_dev = &h->drv[drv_index].dev;
 
 	/* Set up queue information */
 	blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
@@ -1394,8 +1631,8 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
 
 	disk->queue->queuedata = h;
 
-	blk_queue_hardsect_size(disk->queue,
-				h->drv[drv_index].block_size);
+	blk_queue_logical_block_size(disk->queue,
+				     h->drv[drv_index].block_size);
 
 	/* Make sure all queue data is written out before */
 	/* setting h->drv[drv_index].queue, as setting this */
@@ -1468,6 +1705,8 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 	drvinfo->block_size = block_size;
 	drvinfo->nr_blocks = total_size + 1;
 
+	cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor,
+				drvinfo->model, drvinfo->rev);
 	cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
 			sizeof(drvinfo->serial_no));
 
@@ -1517,6 +1756,9 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 	h->drv[drv_index].cylinders = drvinfo->cylinders;
 	h->drv[drv_index].raid_level = drvinfo->raid_level;
 	memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
+	memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1);
+	memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1);
+	memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1);
 
 	++h->num_luns;
 	disk = h->gendisk[drv_index];
@@ -1591,6 +1833,8 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
 		}
 	}
 	h->drv[drv_index].LunID = lunid;
+	if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index))
+		goto err_free_disk;
 
 	/* Don't need to mark this busy because nobody */
 	/* else knows about this disk yet to contend */
@@ -1598,6 +1842,11 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
 	h->drv[drv_index].busy_configuring = 0;
 	wmb();
 	return drv_index;
+
+err_free_disk:
+	put_disk(h->gendisk[drv_index]);
+	h->gendisk[drv_index] = NULL;
+	return -1;
 }
 
 /* This is for the special case of a controller which
@@ -1668,8 +1917,8 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 		goto mem_msg;
 
 	return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
-				      sizeof(ReportLunData_struct), 0,
-				      0, 0, TYPE_CMD);
+				      sizeof(ReportLunData_struct),
+				      0, CTLR_LUNID, TYPE_CMD);
 
 	if (return_code == IO_OK)
 		listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
@@ -1718,6 +1967,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 			h->drv[i].busy_configuring = 1;
 			spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 			return_code = deregister_disk(h, i, 1);
+			cciss_destroy_ld_sysfs_entry(&h->drv[i]);
 			h->drv[i].busy_configuring = 0;
 		}
 	}
@@ -1877,11 +2127,9 @@ static int deregister_disk(ctlr_info_t *h, int drv_index,
 	return 0;
 }
 
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,	/* 0: address the controller,
-															   1: address logical volume log_unit,
-															   2: periph device address is scsi3addr */
-		    unsigned int log_unit, __u8 page_code,
-		    unsigned char *scsi3addr, int cmd_type)
+static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+		size_t size, __u8 page_code, unsigned char *scsi3addr,
+		int cmd_type)
 {
 	ctlr_info_t *h = hba[ctlr];
 	u64bit buff_dma_handle;
@@ -1897,27 +2145,12 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
 		c->Header.SGTotal = 0;
 	}
 	c->Header.Tag.lower = c->busaddr;
+	memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
 
 	c->Request.Type.Type = cmd_type;
 	if (cmd_type == TYPE_CMD) {
 		switch (cmd) {
 		case CISS_INQUIRY:
-			/* If the logical unit number is 0 then, this is going
-			   to controller so It's a physical command
-			   mode = 0 target = 0.  So we have nothing to write.
-			   otherwise, if use_unit_num == 1,
-			   mode = 1(volume set addressing) target = LUNID
-			   otherwise, if use_unit_num == 2,
-			   mode = 0(periph dev addr) target = scsi3addr */
-			if (use_unit_num == 1) {
-				c->Header.LUN.LogDev.VolId =
-				    h->drv[log_unit].LunID;
-				c->Header.LUN.LogDev.Mode = 1;
-			} else if (use_unit_num == 2) {
-				memcpy(c->Header.LUN.LunAddrBytes, scsi3addr,
-				       8);
-				c->Header.LUN.LogDev.Mode = 0;
-			}
 			/* are we trying to read a vital product page */
 			if (page_code != 0) {
 				c->Request.CDB[1] = 0x01;
@@ -1947,8 +2180,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
 			break;
 
 		case CCISS_READ_CAPACITY:
-			c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
-			c->Header.LUN.LogDev.Mode = 1;
 			c->Request.CDBLen = 10;
 			c->Request.Type.Attribute = ATTR_SIMPLE;
 			c->Request.Type.Direction = XFER_READ;
@@ -1956,8 +2187,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
 			c->Request.CDB[0] = cmd;
 			break;
 		case CCISS_READ_CAPACITY_16:
-			c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
-			c->Header.LUN.LogDev.Mode = 1;
 			c->Request.CDBLen = 16;
 			c->Request.Type.Attribute = ATTR_SIMPLE;
 			c->Request.Type.Direction = XFER_READ;
@@ -1979,6 +2208,12 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
 			c->Request.CDB[0] = BMIC_WRITE;
 			c->Request.CDB[6] = BMIC_CACHE_FLUSH;
 			break;
+		case TEST_UNIT_READY:
+			c->Request.CDBLen = 6;
+			c->Request.Type.Attribute = ATTR_SIMPLE;
+			c->Request.Type.Direction = XFER_NONE;
+			c->Request.Timeout = 0;
+			break;
 		default:
 			printk(KERN_WARNING
 			       "cciss%d:  Unknown Command 0x%c\n", ctlr, cmd);
@@ -1997,13 +2232,13 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
 			memcpy(&c->Request.CDB[4], buff, 8);
 			break;
 		case 1:	/* RESET message */
-			c->Request.CDBLen = 12;
+			c->Request.CDBLen = 16;
 			c->Request.Type.Attribute = ATTR_SIMPLE;
-			c->Request.Type.Direction = XFER_WRITE;
+			c->Request.Type.Direction = XFER_NONE;
 			c->Request.Timeout = 0;
 			memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
 			c->Request.CDB[0] = cmd;	/* reset */
-			c->Request.CDB[1] = 0x04;	/* reset a LUN */
+			c->Request.CDB[1] = 0x03;	/* reset a target */
 			break;
 		case 3:	/* No-Op message */
 			c->Request.CDBLen = 1;
@@ -2035,114 +2270,152 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_
 	return status;
 }
 
-static int sendcmd_withirq(__u8 cmd,
-			   int ctlr,
-			   void *buff,
-			   size_t size,
-			   unsigned int use_unit_num,
-			   unsigned int log_unit, __u8 page_code, int cmd_type)
+static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
 {
-	ctlr_info_t *h = hba[ctlr];
-	CommandList_struct *c;
+	switch (c->err_info->ScsiStatus) {
+	case SAM_STAT_GOOD:
+		return IO_OK;
+	case SAM_STAT_CHECK_CONDITION:
+		switch (0xf & c->err_info->SenseInfo[2]) {
+		case 0: return IO_OK; /* no sense */
+		case 1: return IO_OK; /* recovered error */
+		default:
+			printk(KERN_WARNING "cciss%d: cmd 0x%02x "
+				"check condition, sense key = 0x%02x\n",
+				h->ctlr, c->Request.CDB[0],
+				c->err_info->SenseInfo[2]);
+		}
+		break;
+	default:
+		printk(KERN_WARNING "cciss%d: cmd 0x%02x"
+			"scsi status = 0x%02x\n", h->ctlr,
+			c->Request.CDB[0], c->err_info->ScsiStatus);
+		break;
+	}
+	return IO_ERROR;
+}
+
+static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c)
+{
+	int return_status = IO_OK;
+
+	if (c->err_info->CommandStatus == CMD_SUCCESS)
+		return IO_OK;
+
+	switch (c->err_info->CommandStatus) {
+	case CMD_TARGET_STATUS:
+		return_status = check_target_status(h, c);
+		break;
+	case CMD_DATA_UNDERRUN:
+	case CMD_DATA_OVERRUN:
+		/* expected for inquiry and report lun commands */
+		break;
+	case CMD_INVALID:
+		printk(KERN_WARNING "cciss: cmd 0x%02x is "
+		       "reported invalid\n", c->Request.CDB[0]);
+		return_status = IO_ERROR;
+		break;
+	case CMD_PROTOCOL_ERR:
+		printk(KERN_WARNING "cciss: cmd 0x%02x has "
+		       "protocol error \n", c->Request.CDB[0]);
+		return_status = IO_ERROR;
+		break;
+	case CMD_HARDWARE_ERR:
+		printk(KERN_WARNING "cciss: cmd 0x%02x had "
+		       " hardware error\n", c->Request.CDB[0]);
+		return_status = IO_ERROR;
+		break;
+	case CMD_CONNECTION_LOST:
+		printk(KERN_WARNING "cciss: cmd 0x%02x had "
+		       "connection lost\n", c->Request.CDB[0]);
+		return_status = IO_ERROR;
+		break;
+	case CMD_ABORTED:
+		printk(KERN_WARNING "cciss: cmd 0x%02x was "
+		       "aborted\n", c->Request.CDB[0]);
+		return_status = IO_ERROR;
+		break;
+	case CMD_ABORT_FAILED:
+		printk(KERN_WARNING "cciss: cmd 0x%02x reports "
+		       "abort failed\n", c->Request.CDB[0]);
+		return_status = IO_ERROR;
+		break;
+	case CMD_UNSOLICITED_ABORT:
+		printk(KERN_WARNING
+		       "cciss%d: unsolicited abort 0x%02x\n", h->ctlr,
+			c->Request.CDB[0]);
+		return_status = IO_NEEDS_RETRY;
+		break;
+	default:
+		printk(KERN_WARNING "cciss: cmd 0x%02x returned "
+		       "unknown status %x\n", c->Request.CDB[0],
+		       c->err_info->CommandStatus);
+		return_status = IO_ERROR;
+	}
+	return return_status;
+}
+
+static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
+	int attempt_retry)
+{
+	DECLARE_COMPLETION_ONSTACK(wait);
 	u64bit buff_dma_handle;
 	unsigned long flags;
-	int return_status;
-	DECLARE_COMPLETION_ONSTACK(wait);
+	int return_status = IO_OK;
 
-	if ((c = cmd_alloc(h, 0)) == NULL)
-		return -ENOMEM;
-	return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
-				 log_unit, page_code, NULL, cmd_type);
-	if (return_status != IO_OK) {
-		cmd_free(h, c, 0);
-		return return_status;
-	}
-      resend_cmd2:
+resend_cmd2:
 	c->waiting = &wait;
-
 	/* Put the request on the tail of the queue and send it */
-	spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
 	addQ(&h->reqQ, c);
 	h->Qdepth++;
 	start_io(h);
-	spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
 	wait_for_completion(&wait);
 
-	if (c->err_info->CommandStatus != 0) {	/* an error has occurred */
-		switch (c->err_info->CommandStatus) {
-		case CMD_TARGET_STATUS:
-			printk(KERN_WARNING "cciss: cmd %p has "
-			       " completed with errors\n", c);
-			if (c->err_info->ScsiStatus) {
-				printk(KERN_WARNING "cciss: cmd %p "
-				       "has SCSI Status = %x\n",
-				       c, c->err_info->ScsiStatus);
-			}
+	if (c->err_info->CommandStatus == 0 || !attempt_retry)
+		goto command_done;
 
-			break;
-		case CMD_DATA_UNDERRUN:
-		case CMD_DATA_OVERRUN:
-			/* expected for inquire and report lun commands */
-			break;
-		case CMD_INVALID:
-			printk(KERN_WARNING "cciss: Cmd %p is "
-			       "reported invalid\n", c);
-			return_status = IO_ERROR;
-			break;
-		case CMD_PROTOCOL_ERR:
-			printk(KERN_WARNING "cciss: cmd %p has "
-			       "protocol error \n", c);
-			return_status = IO_ERROR;
-			break;
-		case CMD_HARDWARE_ERR:
-			printk(KERN_WARNING "cciss: cmd %p had "
-			       " hardware error\n", c);
-			return_status = IO_ERROR;
-			break;
-		case CMD_CONNECTION_LOST:
-			printk(KERN_WARNING "cciss: cmd %p had "
-			       "connection lost\n", c);
-			return_status = IO_ERROR;
-			break;
-		case CMD_ABORTED:
-			printk(KERN_WARNING "cciss: cmd %p was "
-			       "aborted\n", c);
-			return_status = IO_ERROR;
-			break;
-		case CMD_ABORT_FAILED:
-			printk(KERN_WARNING "cciss: cmd %p reports "
-			       "abort failed\n", c);
-			return_status = IO_ERROR;
-			break;
-		case CMD_UNSOLICITED_ABORT:
-			printk(KERN_WARNING
-			       "cciss%d: unsolicited abort %p\n", ctlr, c);
-			if (c->retry_count < MAX_CMD_RETRIES) {
-				printk(KERN_WARNING
-				       "cciss%d: retrying %p\n", ctlr, c);
-				c->retry_count++;
-				/* erase the old error information */
-				memset(c->err_info, 0,
-				       sizeof(ErrorInfo_struct));
-				return_status = IO_OK;
-				INIT_COMPLETION(wait);
-				goto resend_cmd2;
-			}
-			return_status = IO_ERROR;
-			break;
-		default:
-			printk(KERN_WARNING "cciss: cmd %p returned "
-			       "unknown status %x\n", c,
-			       c->err_info->CommandStatus);
-			return_status = IO_ERROR;
-		}
+	return_status = process_sendcmd_error(h, c);
+
+	if (return_status == IO_NEEDS_RETRY &&
+		c->retry_count < MAX_CMD_RETRIES) {
+		printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr,
+			c->Request.CDB[0]);
+		c->retry_count++;
+		/* erase the old error information */
+		memset(c->err_info, 0, sizeof(ErrorInfo_struct));
+		return_status = IO_OK;
+		INIT_COMPLETION(wait);
+		goto resend_cmd2;
 	}
+
+command_done:
 	/* unlock the buffers from DMA */
 	buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
 	buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
 	pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
 			 c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
+	return return_status;
+}
+
+static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+			   __u8 page_code, unsigned char scsi3addr[],
+			int cmd_type)
+{
+	ctlr_info_t *h = hba[ctlr];
+	CommandList_struct *c;
+	int return_status;
+
+	c = cmd_alloc(h, 0);
+	if (!c)
+		return -ENOMEM;
+	return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+		scsi3addr, cmd_type);
+	if (return_status == IO_OK)
+		return_status = sendcmd_withirq_core(h, c, 1);
+
 	cmd_free(h, c, 0);
 	return return_status;
 }
@@ -2155,15 +2428,17 @@ static void cciss_geometry_inquiry(int ctlr, int logvol,
 {
 	int return_code;
 	unsigned long t;
+	unsigned char scsi3addr[8];
 
 	memset(inq_buff, 0, sizeof(InquiryData_struct));
+	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
 	if (withirq)
 		return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
-					      inq_buff, sizeof(*inq_buff), 1,
-					      logvol, 0xC1, TYPE_CMD);
+					      inq_buff, sizeof(*inq_buff),
+					      0xC1, scsi3addr, TYPE_CMD);
 	else
 		return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
-				      sizeof(*inq_buff), 1, logvol, 0xC1, NULL,
+				      sizeof(*inq_buff), 0xC1, scsi3addr,
 				      TYPE_CMD);
 	if (return_code == IO_OK) {
 		if (inq_buff->data_byte[8] == 0xFF) {
@@ -2204,6 +2479,7 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
 {
 	ReadCapdata_struct *buf;
 	int return_code;
+	unsigned char scsi3addr[8];
 
 	buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
 	if (!buf) {
@@ -2211,14 +2487,15 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
 		return;
 	}
 
+	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
 	if (withirq)
 		return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
 				ctlr, buf, sizeof(ReadCapdata_struct),
-					1, logvol, 0, TYPE_CMD);
+					0, scsi3addr, TYPE_CMD);
 	else
 		return_code = sendcmd(CCISS_READ_CAPACITY,
 				ctlr, buf, sizeof(ReadCapdata_struct),
-					1, logvol, 0, NULL, TYPE_CMD);
+					0, scsi3addr, TYPE_CMD);
 	if (return_code == IO_OK) {
 		*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
 		*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
@@ -2238,6 +2515,7 @@ cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size,
 {
 	ReadCapdata_struct_16 *buf;
 	int return_code;
+	unsigned char scsi3addr[8];
 
 	buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
 	if (!buf) {
@@ -2245,15 +2523,16 @@ cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size,
 		return;
 	}
 
+	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
 	if (withirq) {
 		return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
 			ctlr, buf, sizeof(ReadCapdata_struct_16),
-				1, logvol, 0, TYPE_CMD);
+				0, scsi3addr, TYPE_CMD);
 	}
 	else {
 		return_code = sendcmd(CCISS_READ_CAPACITY_16,
 			ctlr, buf, sizeof(ReadCapdata_struct_16),
-				1, logvol, 0, NULL, TYPE_CMD);
+				0, scsi3addr, TYPE_CMD);
 	}
 	if (return_code == IO_OK) {
 		*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
@@ -2303,7 +2582,7 @@ static int cciss_revalidate(struct gendisk *disk)
 	cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
 			       inq_buff, drv);
 
-	blk_queue_hardsect_size(drv->queue, drv->block_size);
+	blk_queue_logical_block_size(drv->queue, drv->block_size);
 	set_capacity(disk, drv->nr_blocks);
 
 	kfree(inq_buff);
@@ -2333,86 +2612,21 @@ static unsigned long pollcomplete(int ctlr)
 	return 1;
 }
 
-static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
-{
-	/* We get in here if sendcmd() is polling for completions
-	   and gets some command back that it wasn't expecting --
-	   something other than that which it just sent down.
-	   Ordinarily, that shouldn't happen, but it can happen when
-	   the scsi tape stuff gets into error handling mode, and
-	   starts using sendcmd() to try to abort commands and
-	   reset tape drives.  In that case, sendcmd may pick up
-	   completions of commands that were sent to logical drives
-	   through the block i/o system, or cciss ioctls completing, etc.
-	   In that case, we need to save those completions for later
-	   processing by the interrupt handler.
-	 */
-
-#ifdef CONFIG_CISS_SCSI_TAPE
-	struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
-
-	/* If it's not the scsi tape stuff doing error handling, (abort */
-	/* or reset) then we don't expect anything weird. */
-	if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
-#endif
-		printk(KERN_WARNING "cciss cciss%d: SendCmd "
-		       "Invalid command list address returned! (%lx)\n",
-		       ctlr, complete);
-		/* not much we can do. */
-#ifdef CONFIG_CISS_SCSI_TAPE
-		return 1;
-	}
-
-	/* We've sent down an abort or reset, but something else
-	   has completed */
-	if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
-		/* Uh oh.  No room to save it for later... */
-		printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
-		       "reject list overflow, command lost!\n", ctlr);
-		return 1;
-	}
-	/* Save it for later */
-	srl->complete[srl->ncompletions] = complete;
-	srl->ncompletions++;
-#endif
-	return 0;
-}
-
-/*
- * Send a command to the controller, and wait for it to complete.
- * Only used at init time.
+/* Send command c to controller h and poll for it to complete.
+ * Turns interrupts off on the board.  Used at driver init time
+ * and during SCSI error recovery.
  */
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,	/* 0: address the controller,
-												   1: address logical volume log_unit,
-												   2: periph device address is scsi3addr */
-		   unsigned int log_unit,
-		   __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
 {
-	CommandList_struct *c;
 	int i;
 	unsigned long complete;
-	ctlr_info_t *info_p = hba[ctlr];
+	int status = IO_ERROR;
 	u64bit buff_dma_handle;
-	int status, done = 0;
 
-	if ((c = cmd_alloc(info_p, 1)) == NULL) {
-		printk(KERN_WARNING "cciss: unable to get memory");
-		return IO_ERROR;
-	}
-	status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
-			  log_unit, page_code, scsi3addr, cmd_type);
-	if (status != IO_OK) {
-		cmd_free(info_p, c, 1);
-		return status;
-	}
-      resend_cmd1:
-	/*
-	 * Disable interrupt
-	 */
-#ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "cciss: turning intr off\n");
-#endif				/* CCISS_DEBUG */
-	info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
+resend_cmd1:
+
+	/* Disable interrupt on the board. */
+	h->access.set_intr_mask(h, CCISS_INTR_OFF);
 
 	/* Make sure there is room in the command FIFO */
 	/* Actually it should be completely empty at this time */
@@ -2420,21 +2634,15 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use
 	/* tape side of the driver. */
 	for (i = 200000; i > 0; i--) {
 		/* if fifo isn't full go */
-		if (!(info_p->access.fifo_full(info_p))) {
-
+		if (!(h->access.fifo_full(h)))
 			break;
-		}
 		udelay(10);
 		printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
-		       " waiting!\n", ctlr);
+		       " waiting!\n", h->ctlr);
 	}
-	/*
-	 * Send the cmd
-	 */
-	info_p->access.submit_command(info_p, c);
-	done = 0;
+	h->access.submit_command(h, c); /* Send the cmd */
 	do {
-		complete = pollcomplete(ctlr);
+		complete = pollcomplete(h->ctlr);
 
 #ifdef CCISS_DEBUG
 		printk(KERN_DEBUG "cciss: command completed\n");
@@ -2443,97 +2651,102 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use
 		if (complete == 1) {
 			printk(KERN_WARNING
 			       "cciss cciss%d: SendCmd Timeout out, "
-			       "No command list address returned!\n", ctlr);
+			       "No command list address returned!\n", h->ctlr);
 			status = IO_ERROR;
-			done = 1;
 			break;
 		}
 
-		/* This will need to change for direct lookup completions */
-		if ((complete & CISS_ERROR_BIT)
-		    && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
-			/* if data overrun or underun on Report command
-			   ignore it
-			 */
-			if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
-			     (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
-			     (c->Request.CDB[0] == CISS_INQUIRY)) &&
-			    ((c->err_info->CommandStatus ==
-			      CMD_DATA_OVERRUN) ||
-			     (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
-			    )) {
-				complete = c->busaddr;
-			} else {
-				if (c->err_info->CommandStatus ==
-				    CMD_UNSOLICITED_ABORT) {
-					printk(KERN_WARNING "cciss%d: "
-					       "unsolicited abort %p\n",
-					       ctlr, c);
-					if (c->retry_count < MAX_CMD_RETRIES) {
-						printk(KERN_WARNING
-						       "cciss%d: retrying %p\n",
-						       ctlr, c);
-						c->retry_count++;
-						/* erase the old error */
-						/* information */
-						memset(c->err_info, 0,
-						       sizeof
-						       (ErrorInfo_struct));
-						goto resend_cmd1;
-					} else {
-						printk(KERN_WARNING
-						       "cciss%d: retried %p too "
-						       "many times\n", ctlr, c);
-						status = IO_ERROR;
-						goto cleanup1;
-					}
-				} else if (c->err_info->CommandStatus ==
-					   CMD_UNABORTABLE) {
-					printk(KERN_WARNING
-					       "cciss%d: command could not be aborted.\n",
-					       ctlr);
-					status = IO_ERROR;
-					goto cleanup1;
-				}
-				printk(KERN_WARNING "ciss ciss%d: sendcmd"
-				       " Error %x \n", ctlr,
-				       c->err_info->CommandStatus);
-				printk(KERN_WARNING "ciss ciss%d: sendcmd"
-				       " offensive info\n"
-				       "  size %x\n   num %x   value %x\n",
-				       ctlr,
-				       c->err_info->MoreErrInfo.Invalid_Cmd.
-				       offense_size,
-				       c->err_info->MoreErrInfo.Invalid_Cmd.
-				       offense_num,
-				       c->err_info->MoreErrInfo.Invalid_Cmd.
-				       offense_value);
-				status = IO_ERROR;
-				goto cleanup1;
-			}
+		/* Make sure it's the command we're expecting. */
+		if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
+			printk(KERN_WARNING "cciss%d: Unexpected command "
+				"completion.\n", h->ctlr);
+			continue;
+		}
+
+		/* It is our command.  If no error, we're done. */
+		if (!(complete & CISS_ERROR_BIT)) {
+			status = IO_OK;
+			break;
 		}
-		/* This will need changing for direct lookup completions */
-		if (complete != c->busaddr) {
-			if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
-				BUG();	/* we are pretty much hosed if we get here. */
+
+		/* There is an error... */
+
+		/* if data overrun or underun on Report command ignore it */
+		if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
+		     (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
+		     (c->Request.CDB[0] == CISS_INQUIRY)) &&
+			((c->err_info->CommandStatus == CMD_DATA_OVERRUN) ||
+			 (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) {
+			complete = c->busaddr;
+			status = IO_OK;
+			break;
+		}
+
+		if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) {
+			printk(KERN_WARNING "cciss%d: unsolicited abort %p\n",
+				h->ctlr, c);
+			if (c->retry_count < MAX_CMD_RETRIES) {
+				printk(KERN_WARNING "cciss%d: retrying %p\n",
+				   h->ctlr, c);
+				c->retry_count++;
+				/* erase the old error information */
+				memset(c->err_info, 0, sizeof(c->err_info));
+				goto resend_cmd1;
 			}
-			continue;
-		} else
-			done = 1;
-	} while (!done);
+			printk(KERN_WARNING "cciss%d: retried %p too many "
+				"times\n", h->ctlr, c);
+			status = IO_ERROR;
+			break;
+		}
+
+		if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
+			printk(KERN_WARNING "cciss%d: command could not be "
+				"aborted.\n", h->ctlr);
+			status = IO_ERROR;
+			break;
+		}
+
+		if (c->err_info->CommandStatus == CMD_TARGET_STATUS) {
+			status = check_target_status(h, c);
+			break;
+		}
+
+		printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr);
+		printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n",
+			c->Request.CDB[0], c->err_info->CommandStatus);
+		status = IO_ERROR;
+		break;
+
+	} while (1);
 
-      cleanup1:
 	/* unlock the data buffer from DMA */
 	buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
 	buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
-	pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
+	pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
 			 c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
-#ifdef CONFIG_CISS_SCSI_TAPE
-	/* if we saved some commands for later, process them now. */
-	if (info_p->scsi_rejects.ncompletions > 0)
-		do_cciss_intr(0, info_p);
-#endif
-	cmd_free(info_p, c, 1);
+	return status;
+}
+
+/*
+ * Send a command to the controller, and wait for it to complete.
+ * Used at init time, and during SCSI error recovery.
+ */
+static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
+	__u8 page_code, unsigned char *scsi3addr, int cmd_type)
+{
+	CommandList_struct *c;
+	int status;
+
+	c = cmd_alloc(hba[ctlr], 1);
+	if (!c) {
+		printk(KERN_WARNING "cciss: unable to get memory");
+		return IO_ERROR;
+	}
+	status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+		scsi3addr, cmd_type);
+	if (status == IO_OK)
+		status = sendcmd_core(hba[ctlr], c);
+	cmd_free(hba[ctlr], c, 1);
 	return status;
 }
 
@@ -2691,7 +2904,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
 			printk(KERN_WARNING "cciss: cmd %p has"
 			       " completed with data underrun "
 			       "reported\n", cmd);
-			cmd->rq->data_len = cmd->err_info->ResidualCnt;
+			cmd->rq->resid_len = cmd->err_info->ResidualCnt;
 		}
 		break;
 	case CMD_DATA_OVERRUN:
@@ -2806,7 +3019,7 @@ static void do_cciss_request(struct request_queue *q)
 		goto startio;
 
       queue:
-	creq = elv_next_request(q);
+	creq = blk_peek_request(q);
 	if (!creq)
 		goto startio;
 
@@ -2815,7 +3028,7 @@ static void do_cciss_request(struct request_queue *q)
 	if ((c = cmd_alloc(h, 1)) == NULL)
 		goto full;
 
-	blkdev_dequeue_request(creq);
+	blk_start_request(creq);
 
 	spin_unlock_irq(q->queue_lock);
 
@@ -2840,10 +3053,10 @@ static void do_cciss_request(struct request_queue *q)
 	c->Request.Timeout = 0;	// Don't time out
 	c->Request.CDB[0] =
 	    (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
-	start_blk = creq->sector;
+	start_blk = blk_rq_pos(creq);
 #ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
-	       (int)creq->nr_sectors);
+	printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+	       (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
 #endif				/* CCISS_DEBUG */
 
 	sg_init_table(tmp_sg, MAXSGENTRIES);
@@ -2869,8 +3082,8 @@ static void do_cciss_request(struct request_queue *q)
 		h->maxSG = seg;
 
 #ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
-	       creq->nr_sectors, seg);
+	printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
+	       blk_rq_sectors(creq), seg);
 #endif				/* CCISS_DEBUG */
 
 	c->Header.SGList = c->Header.SGTotal = seg;
@@ -2882,8 +3095,8 @@ static void do_cciss_request(struct request_queue *q)
 			c->Request.CDB[4] = (start_blk >> 8) & 0xff;
 			c->Request.CDB[5] = start_blk & 0xff;
 			c->Request.CDB[6] = 0;	// (sect >> 24) & 0xff; MSB
-			c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
-			c->Request.CDB[8] = creq->nr_sectors & 0xff;
+			c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
+			c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
 			c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
 		} else {
 			u32 upper32 = upper_32_bits(start_blk);
@@ -2898,10 +3111,10 @@ static void do_cciss_request(struct request_queue *q)
 			c->Request.CDB[7]= (start_blk >> 16) & 0xff;
 			c->Request.CDB[8]= (start_blk >>  8) & 0xff;
 			c->Request.CDB[9]= start_blk & 0xff;
-			c->Request.CDB[10]= (creq->nr_sectors >>  24) & 0xff;
-			c->Request.CDB[11]= (creq->nr_sectors >>  16) & 0xff;
-			c->Request.CDB[12]= (creq->nr_sectors >>  8) & 0xff;
-			c->Request.CDB[13]= creq->nr_sectors & 0xff;
+			c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
+			c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
+			c->Request.CDB[12]= (blk_rq_sectors(creq) >>  8) & 0xff;
+			c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
 			c->Request.CDB[14] = c->Request.CDB[15] = 0;
 		}
 	} else if (blk_pc_request(creq)) {
@@ -2931,44 +3144,18 @@ startio:
 
 static inline unsigned long get_next_completion(ctlr_info_t *h)
 {
-#ifdef CONFIG_CISS_SCSI_TAPE
-	/* Any rejects from sendcmd() lying around? Process them first */
-	if (h->scsi_rejects.ncompletions == 0)
-		return h->access.command_completed(h);
-	else {
-		struct sendcmd_reject_list *srl;
-		int n;
-		srl = &h->scsi_rejects;
-		n = --srl->ncompletions;
-		/* printk("cciss%d: processing saved reject\n", h->ctlr); */
-		printk("p");
-		return srl->complete[n];
-	}
-#else
 	return h->access.command_completed(h);
-#endif
 }
 
 static inline int interrupt_pending(ctlr_info_t *h)
 {
-#ifdef CONFIG_CISS_SCSI_TAPE
-	return (h->access.intr_pending(h)
-		|| (h->scsi_rejects.ncompletions > 0));
-#else
 	return h->access.intr_pending(h);
-#endif
 }
 
 static inline long interrupt_not_for_us(ctlr_info_t *h)
 {
-#ifdef CONFIG_CISS_SCSI_TAPE
-	return (((h->access.intr_pending(h) == 0) ||
-		 (h->interrupts_enabled == 0))
-		&& (h->scsi_rejects.ncompletions == 0));
-#else
 	return (((h->access.intr_pending(h) == 0) ||
 		 (h->interrupts_enabled == 0)));
-#endif
 }
 
 static irqreturn_t do_cciss_intr(int irq, void *dev_id)
@@ -3723,12 +3910,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	INIT_HLIST_HEAD(&hba[i]->reqQ);
 
 	if (cciss_pci_init(hba[i], pdev) != 0)
-		goto clean1;
+		goto clean0;
 
 	sprintf(hba[i]->devname, "cciss%d", i);
 	hba[i]->ctlr = i;
 	hba[i]->pdev = pdev;
 
+	if (cciss_create_hba_sysfs_entry(hba[i]))
+		goto clean0;
+
 	/* configure PCI DMA stuff */
 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
 		dac = 1;
@@ -3787,15 +3977,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 		printk(KERN_ERR "cciss: out of memory");
 		goto clean4;
 	}
-#ifdef CONFIG_CISS_SCSI_TAPE
-	hba[i]->scsi_rejects.complete =
-	    kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
-		    (hba[i]->nr_cmds + 5), GFP_KERNEL);
-	if (hba[i]->scsi_rejects.complete == NULL) {
-		printk(KERN_ERR "cciss: out of memory");
-		goto clean4;
-	}
-#endif
 	spin_lock_init(&hba[i]->lock);
 
 	/* Initialize the pdev driver private data.
@@ -3828,7 +4009,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	}
 
 	return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
-		sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD);
+		sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
 	if (return_code == IO_OK) {
 		hba[i]->firm_ver[0] = inq_buff->data_byte[32];
 		hba[i]->firm_ver[1] = inq_buff->data_byte[33];
@@ -3855,9 +4036,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 clean4:
 	kfree(inq_buff);
-#ifdef CONFIG_CISS_SCSI_TAPE
-	kfree(hba[i]->scsi_rejects.complete);
-#endif
 	kfree(hba[i]->cmd_pool_bits);
 	if (hba[i]->cmd_pool)
 		pci_free_consistent(hba[i]->pdev,
@@ -3872,6 +4050,8 @@ clean4:
 clean2:
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
 clean1:
+	cciss_destroy_hba_sysfs_entry(hba[i]);
+clean0:
 	hba[i]->busy_initializing = 0;
 	/* cleanup any queues that may have been initialized */
 	for (j=0; j <= hba[i]->highest_lun; j++){
@@ -3907,8 +4087,8 @@ static void cciss_shutdown(struct pci_dev *pdev)
 	/* sendcmd will turn off interrupt, and send the flush...
 	 * To write all data in the battery backed cache to disks */
 	memset(flush_buf, 0, 4);
-	return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
-			      TYPE_CMD);
+	return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0,
+		CTLR_LUNID, TYPE_CMD);
 	if (return_code == IO_OK) {
 		printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
 	} else {
@@ -3973,15 +4153,13 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
 	pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
 			    hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
 	kfree(hba[i]->cmd_pool_bits);
-#ifdef CONFIG_CISS_SCSI_TAPE
-	kfree(hba[i]->scsi_rejects.complete);
-#endif
 	/*
 	 * Deliberately omit pci_disable_device(): it does something nasty to
 	 * Smart Array controllers that pci_enable_device does not undo
 	 */
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
+	cciss_destroy_hba_sysfs_entry(hba[i]);
 	free_hba(i);
 }
 
@@ -3999,6 +4177,8 @@ static struct pci_driver cciss_pci_driver = {
  */
 static int __init cciss_init(void)
 {
+	int err;
+
 	/*
 	 * The hardware requires that commands are aligned on a 64-bit
 	 * boundary. Given that we use pci_alloc_consistent() to allocate an
@@ -4008,8 +4188,20 @@ static int __init cciss_init(void)
 
 	printk(KERN_INFO DRIVER_NAME "\n");
 
+	err = bus_register(&cciss_bus_type);
+	if (err)
+		return err;
+
 	/* Register for our PCI devices */
-	return pci_register_driver(&cciss_pci_driver);
+	err = pci_register_driver(&cciss_pci_driver);
+	if (err)
+		goto err_bus_register;
+
+	return 0;
+
+err_bus_register:
+	bus_unregister(&cciss_bus_type);
+	return err;
 }
 
 static void __exit cciss_cleanup(void)
@@ -4026,6 +4218,7 @@ static void __exit cciss_cleanup(void)
 		}
 	}
 	remove_proc_entry("driver/cciss", NULL);
+	bus_unregister(&cciss_bus_type);
 }
 
 static void fail_all_cmds(unsigned long ctlr)
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 703e08038fb..06a5db25b29 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -11,6 +11,11 @@
 
 #define IO_OK		0
 #define IO_ERROR	1
+#define IO_NEEDS_RETRY  3
+
+#define VENDOR_LEN	8
+#define MODEL_LEN	16
+#define REV_LEN		4
 
 struct ctlr_info;
 typedef struct ctlr_info ctlr_info_t;
@@ -34,23 +39,20 @@ typedef struct _drive_info_struct
 	int 	cylinders;
 	int	raid_level; /* set to -1 to indicate that
 			     * the drive is not in use/configured
-			    */
-	int	busy_configuring; /*This is set when the drive is being removed
-				   *to prevent it from being opened or it's queue
-				   *from being started.
-				  */
-	__u8 serial_no[16]; /* from inquiry page 0x83, */
-			    /* not necc. null terminated. */
+			     */
+	int	busy_configuring; /* This is set when a drive is being removed
+				   * to prevent it from being opened or it's
+				   * queue from being started.
+				   */
+	struct	device dev;
+	__u8 serial_no[16]; /* from inquiry page 0x83,
+			     * not necc. null terminated.
+			     */
+	char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
+	char model[MODEL_LEN + 1];   /* SCSI model string */
+	char rev[REV_LEN + 1];       /* SCSI revision string */
 } drive_info_struct;
 
-#ifdef CONFIG_CISS_SCSI_TAPE
-
-struct sendcmd_reject_list {
-	int ncompletions;
-	unsigned long *complete; /* array of NR_CMDS tags */
-};
-
-#endif
 struct ctlr_info 
 {
 	int	ctlr;
@@ -118,11 +120,11 @@ struct ctlr_info
 	void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
 	/* list of block side commands the scsi error handling sucked up */
 	/* and saved for later processing */
-	struct sendcmd_reject_list scsi_rejects;
 #endif
 	unsigned char alive;
 	struct completion *rescan_wait;
 	struct task_struct *cciss_scan_thread;
+	struct device dev;
 };
 
 /*  Defining the diffent access_menthods */
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index 40b1b92dae7..cd665b00c7c 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -217,6 +217,8 @@ typedef union _LUNAddr_struct {
   LogDevAddr_struct  LogDev;
 } LUNAddr_struct;
 
+#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
+
 typedef struct _CommandListHeader_struct {
   BYTE              ReplyQueue;
   BYTE              SGList;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index a3fd87b4144..3315268b4ec 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -44,20 +44,13 @@
 #define CCISS_ABORT_MSG 0x00
 #define CCISS_RESET_MSG 0x01
 
-/* some prototypes... */ 
-static int sendcmd(
-	__u8	cmd,
-	int	ctlr,
-	void	*buff,
-	size_t	size,
-	unsigned int use_unit_num, /* 0: address the controller,
-				      1: address logical volume log_unit, 
-				      2: address is in scsi3addr */
-	unsigned int log_unit,
-	__u8	page_code,
-	unsigned char *scsi3addr,
+static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+	size_t size,
+	__u8 page_code, unsigned char *scsi3addr,
 	int cmd_type);
 
+static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool);
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool);
 
 static int cciss_scsi_proc_info(
 		struct Scsi_Host *sh,
@@ -1575,6 +1568,75 @@ cciss_seq_tape_report(struct seq_file *seq, int ctlr)
 	CPQ_TAPE_UNLOCK(ctlr, flags);
 }
 
+static int wait_for_device_to_become_ready(ctlr_info_t *h,
+	unsigned char lunaddr[])
+{
+	int rc;
+	int count = 0;
+	int waittime = HZ;
+	CommandList_struct *c;
+
+	c = cmd_alloc(h, 1);
+	if (!c) {
+		printk(KERN_WARNING "cciss%d: out of memory in "
+			"wait_for_device_to_become_ready.\n", h->ctlr);
+		return IO_ERROR;
+	}
+
+	/* Send test unit ready until device ready, or give up. */
+	while (count < 20) {
+
+		/* Wait for a bit.  do this first, because if we send
+		 * the TUR right away, the reset will just abort it.
+		 */
+		schedule_timeout_uninterruptible(waittime);
+		count++;
+
+		/* Increase wait time with each try, up to a point. */
+		if (waittime < (HZ * 30))
+			waittime = waittime * 2;
+
+		/* Send the Test Unit Ready */
+		rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0,
+			lunaddr, TYPE_CMD);
+		if (rc == 0)
+			rc = sendcmd_withirq_core(h, c, 0);
+
+		(void) process_sendcmd_error(h, c);
+
+		if (rc != 0)
+			goto retry_tur;
+
+		if (c->err_info->CommandStatus == CMD_SUCCESS)
+			break;
+
+		if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+			c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
+			if (c->err_info->SenseInfo[2] == NO_SENSE)
+				break;
+			if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) {
+				unsigned char asc;
+				asc = c->err_info->SenseInfo[12];
+				check_for_unit_attention(h, c);
+				if (asc == POWER_OR_RESET)
+					break;
+			}
+		}
+retry_tur:
+		printk(KERN_WARNING "cciss%d: Waiting %d secs "
+			"for device to become ready.\n",
+			h->ctlr, waittime / HZ);
+		rc = 1; /* device not ready. */
+	}
+
+	if (rc)
+		printk("cciss%d: giving up on device.\n", h->ctlr);
+	else
+		printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr);
+
+	cmd_free(h, c, 1);
+	return rc;
+}
 
 /* Need at least one of these error handlers to keep ../scsi/hosts.c from 
  * complaining.  Doing a host- or bus-reset can't do anything good here. 
@@ -1591,6 +1653,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 {
 	int rc;
 	CommandList_struct *cmd_in_trouble;
+	unsigned char lunaddr[8];
 	ctlr_info_t **c;
 	int ctlr;
 
@@ -1600,19 +1663,15 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 		return FAILED;
 	ctlr = (*c)->ctlr;
 	printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
-
 	/* find the command that's giving us trouble */
 	cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
-	if (cmd_in_trouble == NULL) { /* paranoia */
+	if (cmd_in_trouble == NULL) /* paranoia */
 		return FAILED;
-	}
+	memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
 	/* send a reset to the SCSI LUN which the command was sent to */
-	rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, 
-		(unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 
+	rc = sendcmd_withirq(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr,
 		TYPE_MSG);
-	/* sendcmd turned off interrupts on the board, turn 'em back on. */
-	(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
-	if (rc == 0)
+	if (rc == 0 && wait_for_device_to_become_ready(*c, lunaddr) == 0)
 		return SUCCESS;
 	printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
 	return FAILED;
@@ -1622,6 +1681,7 @@ static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
 {
 	int rc;
 	CommandList_struct *cmd_to_abort;
+	unsigned char lunaddr[8];
 	ctlr_info_t **c;
 	int ctlr;
 
@@ -1636,12 +1696,9 @@ static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
 	cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
 	if (cmd_to_abort == NULL) /* paranoia */
 		return FAILED;
-	rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag, 
-		0, 2, 0, 0, 
-		(unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], 
-		TYPE_MSG);
-	/* sendcmd turned off interrupts on the board, turn 'em back on. */
-	(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
+	memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
+	rc = sendcmd_withirq(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag,
+		0, 0, lunaddr, TYPE_MSG);
 	if (rc == 0)
 		return SUCCESS;
 	return FAILED;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index ca268ca1115..44fa2018f6b 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -474,7 +474,7 @@ static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev)
 		disk->fops = &ida_fops;
 		if (j && !drv->nr_blks)
 			continue;
-		blk_queue_hardsect_size(hba[i]->queue, drv->blk_size);
+		blk_queue_logical_block_size(hba[i]->queue, drv->blk_size);
 		set_capacity(disk, drv->nr_blks);
 		disk->queue = hba[i]->queue;
 		disk->private_data = drv;
@@ -903,7 +903,7 @@ static void do_ida_request(struct request_queue *q)
 		goto startio;
 
 queue_next:
-	creq = elv_next_request(q);
+	creq = blk_peek_request(q);
 	if (!creq)
 		goto startio;
 
@@ -912,17 +912,18 @@ queue_next:
 	if ((c = cmd_alloc(h,1)) == NULL)
 		goto startio;
 
-	blkdev_dequeue_request(creq);
+	blk_start_request(creq);
 
 	c->ctlr = h->ctlr;
 	c->hdr.unit = (drv_info_t *)(creq->rq_disk->private_data) - h->drv;
 	c->hdr.size = sizeof(rblk_t) >> 2;
 	c->size += sizeof(rblk_t);
 
-	c->req.hdr.blk = creq->sector;
+	c->req.hdr.blk = blk_rq_pos(creq);
 	c->rq = creq;
 DBGPX(
-	printk("sector=%d, nr_sectors=%d\n", creq->sector, creq->nr_sectors);
+	printk("sector=%d, nr_sectors=%u\n",
+	       blk_rq_pos(creq), blk_rq_sectors(creq));
 );
 	sg_init_table(tmp_sg, SG_MAX);
 	seg = blk_rq_map_sg(q, creq, tmp_sg);
@@ -940,9 +941,9 @@ DBGPX(
 						 tmp_sg[i].offset,
 						 tmp_sg[i].length, dir);
 	}
-DBGPX(	printk("Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); );
+DBGPX(	printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); );
 	c->req.hdr.sg_cnt = seg;
-	c->req.hdr.blk_cnt = creq->nr_sectors;
+	c->req.hdr.blk_cnt = blk_rq_sectors(creq);
 	c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE;
 	c->type = CMD_RWREQ;
 
@@ -1024,8 +1025,7 @@ static inline void complete_command(cmdlist_t *cmd, int timeout)
 				cmd->req.sg[i].size, ddir);
 
 	DBGPX(printk("Done with %p\n", rq););
-	if (__blk_end_request(rq, error, blk_rq_bytes(rq)))
-		BUG();
+	__blk_end_request_all(rq, error);
 }
 
 /*
@@ -1546,7 +1546,7 @@ static int revalidate_allvol(ctlr_info_t *host)
 		drv_info_t *drv = &host->drv[i];
 		if (i && !drv->nr_blks)
 			continue;
-		blk_queue_hardsect_size(host->queue, drv->blk_size);
+		blk_queue_logical_block_size(host->queue, drv->blk_size);
 		set_capacity(disk, drv->nr_blks);
 		disk->queue = host->queue;
 		disk->private_data = drv;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 1300df6f164..862b40c9018 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -931,7 +931,7 @@ static inline void unlock_fdc(void)
 	del_timer(&fd_timeout);
 	cont = NULL;
 	clear_bit(0, &fdc_busy);
-	if (elv_next_request(floppy_queue))
+	if (current_req || blk_peek_request(floppy_queue))
 		do_fd_request(floppy_queue);
 	spin_unlock_irqrestore(&floppy_lock, flags);
 	wake_up(&fdc_wait);
@@ -2303,7 +2303,7 @@ static void floppy_end_request(struct request *req, int error)
 
 	/* current_count_sectors can be zero if transfer failed */
 	if (error)
-		nr_sectors = req->current_nr_sectors;
+		nr_sectors = blk_rq_cur_sectors(req);
 	if (__blk_end_request(req, error, nr_sectors << 9))
 		return;
 
@@ -2332,7 +2332,7 @@ static void request_done(int uptodate)
 	if (uptodate) {
 		/* maintain values for invalidation on geometry
 		 * change */
-		block = current_count_sectors + req->sector;
+		block = current_count_sectors + blk_rq_pos(req);
 		INFBOUND(DRS->maxblock, block);
 		if (block > _floppy->sect)
 			DRS->maxtrack = 1;
@@ -2346,10 +2346,10 @@ static void request_done(int uptodate)
 			/* record write error information */
 			DRWE->write_errors++;
 			if (DRWE->write_errors == 1) {
-				DRWE->first_error_sector = req->sector;
+				DRWE->first_error_sector = blk_rq_pos(req);
 				DRWE->first_error_generation = DRS->generation;
 			}
-			DRWE->last_error_sector = req->sector;
+			DRWE->last_error_sector = blk_rq_pos(req);
 			DRWE->last_error_generation = DRS->generation;
 		}
 		spin_lock_irqsave(q->queue_lock, flags);
@@ -2503,24 +2503,23 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 
 	max_sector = transfer_size(ssize,
 				   min(max_sector, max_sector_2),
-				   current_req->nr_sectors);
+				   blk_rq_sectors(current_req));
 
 	if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
-	    buffer_max > fsector_t + current_req->nr_sectors)
+	    buffer_max > fsector_t + blk_rq_sectors(current_req))
 		current_count_sectors = min_t(int, buffer_max - fsector_t,
-					      current_req->nr_sectors);
+					      blk_rq_sectors(current_req));
 
 	remaining = current_count_sectors << 9;
 #ifdef FLOPPY_SANITY_CHECK
-	if ((remaining >> 9) > current_req->nr_sectors &&
-	    CT(COMMAND) == FD_WRITE) {
+	if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
 		DPRINT("in copy buffer\n");
 		printk("current_count_sectors=%ld\n", current_count_sectors);
 		printk("remaining=%d\n", remaining >> 9);
-		printk("current_req->nr_sectors=%ld\n",
-		       current_req->nr_sectors);
+		printk("current_req->nr_sectors=%u\n",
+		       blk_rq_sectors(current_req));
 		printk("current_req->current_nr_sectors=%u\n",
-		       current_req->current_nr_sectors);
+		       blk_rq_cur_sectors(current_req));
 		printk("max_sector=%d\n", max_sector);
 		printk("ssize=%d\n", ssize);
 	}
@@ -2530,7 +2529,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 
 	dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);
 
-	size = current_req->current_nr_sectors << 9;
+	size = blk_rq_cur_bytes(current_req);
 
 	rq_for_each_segment(bv, current_req, iter) {
 		if (!remaining)
@@ -2648,10 +2647,10 @@ static int make_raw_rw_request(void)
 
 	max_sector = _floppy->sect * _floppy->head;
 
-	TRACK = (int)current_req->sector / max_sector;
-	fsector_t = (int)current_req->sector % max_sector;
+	TRACK = (int)blk_rq_pos(current_req) / max_sector;
+	fsector_t = (int)blk_rq_pos(current_req) % max_sector;
 	if (_floppy->track && TRACK >= _floppy->track) {
-		if (current_req->current_nr_sectors & 1) {
+		if (blk_rq_cur_sectors(current_req) & 1) {
 			current_count_sectors = 1;
 			return 1;
 		} else
@@ -2669,7 +2668,7 @@ static int make_raw_rw_request(void)
 		if (fsector_t >= max_sector) {
 			current_count_sectors =
 			    min_t(int, _floppy->sect - fsector_t,
-				  current_req->nr_sectors);
+				  blk_rq_sectors(current_req));
 			return 1;
 		}
 		SIZECODE = 2;
@@ -2720,7 +2719,7 @@ static int make_raw_rw_request(void)
 
 	in_sector_offset = (fsector_t % _floppy->sect) % ssize;
 	aligned_sector_t = fsector_t - in_sector_offset;
-	max_size = current_req->nr_sectors;
+	max_size = blk_rq_sectors(current_req);
 	if ((raw_cmd->track == buffer_track) &&
 	    (current_drive == buffer_drive) &&
 	    (fsector_t >= buffer_min) && (fsector_t < buffer_max)) {
@@ -2729,10 +2728,10 @@ static int make_raw_rw_request(void)
 			copy_buffer(1, max_sector, buffer_max);
 			return 1;
 		}
-	} else if (in_sector_offset || current_req->nr_sectors < ssize) {
+	} else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
 		if (CT(COMMAND) == FD_WRITE) {
-			if (fsector_t + current_req->nr_sectors > ssize &&
-			    fsector_t + current_req->nr_sectors < ssize + ssize)
+			if (fsector_t + blk_rq_sectors(current_req) > ssize &&
+			    fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
 				max_size = ssize + ssize;
 			else
 				max_size = ssize;
@@ -2776,7 +2775,7 @@ static int make_raw_rw_request(void)
 		    (indirect * 2 > direct * 3 &&
 		     *errors < DP->max_errors.read_track && ((!probing
 		       || (DP->read_track & (1 << DRS->probed_format)))))) {
-			max_size = current_req->nr_sectors;
+			max_size = blk_rq_sectors(current_req);
 		} else {
 			raw_cmd->kernel_data = current_req->buffer;
 			raw_cmd->length = current_count_sectors << 9;
@@ -2801,7 +2800,7 @@ static int make_raw_rw_request(void)
 	    fsector_t > buffer_max ||
 	    fsector_t < buffer_min ||
 	    ((CT(COMMAND) == FD_READ ||
-	      (!in_sector_offset && current_req->nr_sectors >= ssize)) &&
+	      (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
 	     max_sector > 2 * max_buffer_sectors + buffer_min &&
 	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
 	    /* not enough space */
@@ -2879,8 +2878,8 @@ static int make_raw_rw_request(void)
 				printk("write\n");
 			return 0;
 		}
-	} else if (raw_cmd->length > current_req->nr_sectors << 9 ||
-		   current_count_sectors > current_req->nr_sectors) {
+	} else if (raw_cmd->length > blk_rq_bytes(current_req) ||
+		   current_count_sectors > blk_rq_sectors(current_req)) {
 		DPRINT("buffer overrun in direct transfer\n");
 		return 0;
 	} else if (raw_cmd->length < current_count_sectors << 9) {
@@ -2913,7 +2912,7 @@ static void redo_fd_request(void)
 			struct request *req;
 
 			spin_lock_irq(floppy_queue->queue_lock);
-			req = elv_next_request(floppy_queue);
+			req = blk_fetch_request(floppy_queue);
 			spin_unlock_irq(floppy_queue->queue_lock);
 			if (!req) {
 				do_floppy = NULL;
@@ -2990,8 +2989,9 @@ static void do_fd_request(struct request_queue * q)
 	if (usage_count == 0) {
 		printk("warning: usage count=0, current_req=%p exiting\n",
 		       current_req);
-		printk("sect=%ld type=%x flags=%x\n", (long)current_req->sector,
-		       current_req->cmd_type, current_req->cmd_flags);
+		printk("sect=%ld type=%x flags=%x\n",
+		       (long)blk_rq_pos(current_req), current_req->cmd_type,
+		       current_req->cmd_flags);
 		return;
 	}
 	if (test_bit(0, &fdc_busy)) {
@@ -4148,6 +4148,24 @@ static void floppy_device_release(struct device *dev)
 {
 }
 
+static int floppy_resume(struct platform_device *dev)
+{
+	int fdc;
+
+	for (fdc = 0; fdc < N_FDC; fdc++)
+		if (FDCS->address != -1)
+			user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+
+	return 0;
+}
+
+static struct platform_driver floppy_driver = {
+	.resume = floppy_resume,
+	.driver = {
+		.name = "floppy",
+	},
+};
+
 static struct platform_device floppy_device[N_DRIVE];
 
 static struct kobject *floppy_find(dev_t dev, int *part, void *data)
@@ -4196,10 +4214,14 @@ static int __init floppy_init(void)
 	if (err)
 		goto out_put_disk;
 
+	err = platform_driver_register(&floppy_driver);
+	if (err)
+		goto out_unreg_blkdev;
+
 	floppy_queue = blk_init_queue(do_fd_request, &floppy_lock);
 	if (!floppy_queue) {
 		err = -ENOMEM;
-		goto out_unreg_blkdev;
+		goto out_unreg_driver;
 	}
 	blk_queue_max_sectors(floppy_queue, 64);
 
@@ -4346,6 +4368,8 @@ out_flush_work:
 out_unreg_region:
 	blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
 	blk_cleanup_queue(floppy_queue);
+out_unreg_driver:
+	platform_driver_unregister(&floppy_driver);
 out_unreg_blkdev:
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
@@ -4566,6 +4590,7 @@ static void __exit floppy_module_exit(void)
 
 	blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
+	platform_driver_unregister(&floppy_driver);
 
 	for (drive = 0; drive < N_DRIVE; drive++) {
 		del_timer_sync(&motor_off_timer[drive]);
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index baaa9e486e5..f65b3f369eb 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -98,10 +98,9 @@
 
 static DEFINE_SPINLOCK(hd_lock);
 static struct request_queue *hd_queue;
+static struct request *hd_req;
 
 #define MAJOR_NR HD_MAJOR
-#define QUEUE (hd_queue)
-#define CURRENT elv_next_request(hd_queue)
 
 #define TIMEOUT_VALUE	(6*HZ)
 #define	HD_DELAY	0
@@ -195,11 +194,24 @@ static void __init hd_setup(char *str, int *ints)
 	NR_HD = hdind+1;
 }
 
+static bool hd_end_request(int err, unsigned int bytes)
+{
+	if (__blk_end_request(hd_req, err, bytes))
+		return true;
+	hd_req = NULL;
+	return false;
+}
+
+static bool hd_end_request_cur(int err)
+{
+	return hd_end_request(err, blk_rq_cur_bytes(hd_req));
+}
+
 static void dump_status(const char *msg, unsigned int stat)
 {
 	char *name = "hd?";
-	if (CURRENT)
-		name = CURRENT->rq_disk->disk_name;
+	if (hd_req)
+		name = hd_req->rq_disk->disk_name;
 
 #ifdef VERBOSE_ERRORS
 	printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff);
@@ -227,8 +239,8 @@ static void dump_status(const char *msg, unsigned int stat)
 		if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) {
 			printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL),
 				inb(HD_CURRENT) & 0xf, inb(HD_SECTOR));
-			if (CURRENT)
-				printk(", sector=%ld", CURRENT->sector);
+			if (hd_req)
+				printk(", sector=%ld", blk_rq_pos(hd_req));
 		}
 		printk("\n");
 	}
@@ -406,11 +418,12 @@ static void unexpected_hd_interrupt(void)
  */
 static void bad_rw_intr(void)
 {
-	struct request *req = CURRENT;
+	struct request *req = hd_req;
+
 	if (req != NULL) {
 		struct hd_i_struct *disk = req->rq_disk->private_data;
 		if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) {
-			end_request(req, 0);
+			hd_end_request_cur(-EIO);
 			disk->special_op = disk->recalibrate = 1;
 		} else if (req->errors % RESET_FREQ == 0)
 			reset = 1;
@@ -452,37 +465,30 @@ static void read_intr(void)
 	bad_rw_intr();
 	hd_request();
 	return;
+
 ok_to_read:
-	req = CURRENT;
+	req = hd_req;
 	insw(HD_DATA, req->buffer, 256);
-	req->sector++;
-	req->buffer += 512;
-	req->errors = 0;
-	i = --req->nr_sectors;
-	--req->current_nr_sectors;
 #ifdef DEBUG
-	printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n",
-		req->rq_disk->disk_name, req->sector, req->nr_sectors,
-		req->buffer+512);
+	printk("%s: read: sector %ld, remaining = %u, buffer=%p\n",
+	       req->rq_disk->disk_name, blk_rq_pos(req) + 1,
+	       blk_rq_sectors(req) - 1, req->buffer+512);
 #endif
-	if (req->current_nr_sectors <= 0)
-		end_request(req, 1);
-	if (i > 0) {
+	if (hd_end_request(0, 512)) {
 		SET_HANDLER(&read_intr);
 		return;
 	}
+
 	(void) inb_p(HD_STATUS);
 #if (HD_DELAY > 0)
 	last_req = read_timer();
 #endif
-	if (elv_next_request(QUEUE))
-		hd_request();
-	return;
+	hd_request();
 }
 
 static void write_intr(void)
 {
-	struct request *req = CURRENT;
+	struct request *req = hd_req;
 	int i;
 	int retries = 100000;
 
@@ -492,30 +498,25 @@ static void write_intr(void)
 			continue;
 		if (!OK_STATUS(i))
 			break;
-		if ((req->nr_sectors <= 1) || (i & DRQ_STAT))
+		if ((blk_rq_sectors(req) <= 1) || (i & DRQ_STAT))
 			goto ok_to_write;
 	} while (--retries > 0);
 	dump_status("write_intr", i);
 	bad_rw_intr();
 	hd_request();
 	return;
+
 ok_to_write:
-	req->sector++;
-	i = --req->nr_sectors;
-	--req->current_nr_sectors;
-	req->buffer += 512;
-	if (!i || (req->bio && req->current_nr_sectors <= 0))
-		end_request(req, 1);
-	if (i > 0) {
+	if (hd_end_request(0, 512)) {
 		SET_HANDLER(&write_intr);
 		outsw(HD_DATA, req->buffer, 256);
-	} else {
+		return;
+	}
+
 #if (HD_DELAY > 0)
-		last_req = read_timer();
+	last_req = read_timer();
 #endif
-		hd_request();
-	}
-	return;
+	hd_request();
 }
 
 static void recal_intr(void)
@@ -537,18 +538,18 @@ static void hd_times_out(unsigned long dummy)
 
 	do_hd = NULL;
 
-	if (!CURRENT)
+	if (!hd_req)
 		return;
 
 	spin_lock_irq(hd_queue->queue_lock);
 	reset = 1;
-	name = CURRENT->rq_disk->disk_name;
+	name = hd_req->rq_disk->disk_name;
 	printk("%s: timeout\n", name);
-	if (++CURRENT->errors >= MAX_ERRORS) {
+	if (++hd_req->errors >= MAX_ERRORS) {
 #ifdef DEBUG
 		printk("%s: too many errors\n", name);
 #endif
-		end_request(CURRENT, 0);
+		hd_end_request_cur(-EIO);
 	}
 	hd_request();
 	spin_unlock_irq(hd_queue->queue_lock);
@@ -563,7 +564,7 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req)
 	}
 	if (disk->head > 16) {
 		printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name);
-		end_request(req, 0);
+		hd_end_request_cur(-EIO);
 	}
 	disk->special_op = 0;
 	return 1;
@@ -590,24 +591,27 @@ static void hd_request(void)
 repeat:
 	del_timer(&device_timer);
 
-	req = CURRENT;
-	if (!req) {
-		do_hd = NULL;
-		return;
+	if (!hd_req) {
+		hd_req = blk_fetch_request(hd_queue);
+		if (!hd_req) {
+			do_hd = NULL;
+			return;
+		}
 	}
+	req = hd_req;
 
 	if (reset) {
 		reset_hd();
 		return;
 	}
 	disk = req->rq_disk->private_data;
-	block = req->sector;
-	nsect = req->nr_sectors;
+	block = blk_rq_pos(req);
+	nsect = blk_rq_sectors(req);
 	if (block >= get_capacity(req->rq_disk) ||
 	    ((block+nsect) > get_capacity(req->rq_disk))) {
 		printk("%s: bad access: block=%d, count=%d\n",
 			req->rq_disk->disk_name, block, nsect);
-		end_request(req, 0);
+		hd_end_request_cur(-EIO);
 		goto repeat;
 	}
 
@@ -647,7 +651,7 @@ repeat:
 			break;
 		default:
 			printk("unknown hd-command\n");
-			end_request(req, 0);
+			hd_end_request_cur(-EIO);
 			break;
 		}
 	}
@@ -720,7 +724,7 @@ static int __init hd_init(void)
 	blk_queue_max_sectors(hd_queue, 255);
 	init_timer(&device_timer);
 	device_timer.function = hd_times_out;
-	blk_queue_hardsect_size(hd_queue, 512);
+	blk_queue_logical_block_size(hd_queue, 512);
 
 	if (!NR_HD) {
 		/*
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ddae8082589..801f4ab8330 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -511,11 +511,7 @@ out:
  */
 static void loop_add_bio(struct loop_device *lo, struct bio *bio)
 {
-	if (lo->lo_biotail) {
-		lo->lo_biotail->bi_next = bio;
-		lo->lo_biotail = bio;
-	} else
-		lo->lo_bio = lo->lo_biotail = bio;
+	bio_list_add(&lo->lo_bio_list, bio);
 }
 
 /*
@@ -523,16 +519,7 @@ static void loop_add_bio(struct loop_device *lo, struct bio *bio)
  */
 static struct bio *loop_get_bio(struct loop_device *lo)
 {
-	struct bio *bio;
-
-	if ((bio = lo->lo_bio)) {
-		if (bio == lo->lo_biotail)
-			lo->lo_biotail = NULL;
-		lo->lo_bio = bio->bi_next;
-		bio->bi_next = NULL;
-	}
-
-	return bio;
+	return bio_list_pop(&lo->lo_bio_list);
 }
 
 static int loop_make_request(struct request_queue *q, struct bio *old_bio)
@@ -609,12 +596,13 @@ static int loop_thread(void *data)
 
 	set_user_nice(current, -20);
 
-	while (!kthread_should_stop() || lo->lo_bio) {
+	while (!kthread_should_stop() || !bio_list_empty(&lo->lo_bio_list)) {
 
 		wait_event_interruptible(lo->lo_event,
-				lo->lo_bio || kthread_should_stop());
+				!bio_list_empty(&lo->lo_bio_list) ||
+				kthread_should_stop());
 
-		if (!lo->lo_bio)
+		if (bio_list_empty(&lo->lo_bio_list))
 			continue;
 		spin_lock_irq(&lo->lo_lock);
 		bio = loop_get_bio(lo);
@@ -721,10 +709,6 @@ static int loop_change_fd(struct loop_device *lo, struct block_device *bdev,
 	if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))
 		goto out_putf;
 
-	/* new backing store needs to support loop (eg splice_read) */
-	if (!inode->i_fop->splice_read)
-		goto out_putf;
-
 	/* size of the new backing store needs to be the same */
 	if (get_loop_size(lo, file) != get_loop_size(lo, old_file))
 		goto out_putf;
@@ -800,12 +784,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 	error = -EINVAL;
 	if (S_ISREG(inode->i_mode) || S_ISBLK(inode->i_mode)) {
 		const struct address_space_operations *aops = mapping->a_ops;
-		/*
-		 * If we can't read - sorry. If we only can't write - well,
-		 * it's going to be read-only.
-		 */
-		if (!file->f_op->splice_read)
-			goto out_putf;
+
 		if (aops->write_begin)
 			lo_flags |= LO_FLAGS_USE_AOPS;
 		if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write)
@@ -841,7 +820,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 	lo->old_gfp_mask = mapping_gfp_mask(mapping);
 	mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
 
-	lo->lo_bio = lo->lo_biotail = NULL;
+	bio_list_init(&lo->lo_bio_list);
 
 	/*
 	 * set queue make_request_fn, and add limits based on lower level
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index f3898353d0a..60de5a01e71 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -17,71 +17,220 @@
 #include <linux/fs.h>
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
-#include <linux/libata.h>
+#include <linux/ata.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/mg_disk.h>
 
 #define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
 
+/* name for block device */
+#define MG_DISK_NAME "mgd"
+/* name for platform device */
+#define MG_DEV_NAME "mg_disk"
+
+#define MG_DISK_MAJ 0
+#define MG_DISK_MAX_PART 16
+#define MG_SECTOR_SIZE 512
+#define MG_MAX_SECTS 256
+
+/* Register offsets */
+#define MG_BUFF_OFFSET			0x8000
+#define MG_STORAGE_BUFFER_SIZE		0x200
+#define MG_REG_OFFSET			0xC000
+#define MG_REG_FEATURE			(MG_REG_OFFSET + 2)	/* write case */
+#define MG_REG_ERROR			(MG_REG_OFFSET + 2)	/* read case */
+#define MG_REG_SECT_CNT			(MG_REG_OFFSET + 4)
+#define MG_REG_SECT_NUM			(MG_REG_OFFSET + 6)
+#define MG_REG_CYL_LOW			(MG_REG_OFFSET + 8)
+#define MG_REG_CYL_HIGH			(MG_REG_OFFSET + 0xA)
+#define MG_REG_DRV_HEAD			(MG_REG_OFFSET + 0xC)
+#define MG_REG_COMMAND			(MG_REG_OFFSET + 0xE)	/* write case */
+#define MG_REG_STATUS			(MG_REG_OFFSET + 0xE)	/* read  case */
+#define MG_REG_DRV_CTRL			(MG_REG_OFFSET + 0x10)
+#define MG_REG_BURST_CTRL		(MG_REG_OFFSET + 0x12)
+
+/* handy status */
+#define MG_STAT_READY	(ATA_DRDY | ATA_DSC)
+#define MG_READY_OK(s)	(((s) & (MG_STAT_READY | (ATA_BUSY | ATA_DF | \
+				 ATA_ERR))) == MG_STAT_READY)
+
+/* error code for others */
+#define MG_ERR_NONE		0
+#define MG_ERR_TIMEOUT		0x100
+#define MG_ERR_INIT_STAT	0x101
+#define MG_ERR_TRANSLATION	0x102
+#define MG_ERR_CTRL_RST		0x103
+#define MG_ERR_INV_STAT		0x104
+#define MG_ERR_RSTOUT		0x105
+
+#define MG_MAX_ERRORS	6	/* Max read/write errors */
+
+/* command */
+#define MG_CMD_RD 0x20
+#define MG_CMD_WR 0x30
+#define MG_CMD_SLEEP 0x99
+#define MG_CMD_WAKEUP 0xC3
+#define MG_CMD_ID 0xEC
+#define MG_CMD_WR_CONF 0x3C
+#define MG_CMD_RD_CONF 0x40
+
+/* operation mode */
+#define MG_OP_CASCADE (1 << 0)
+#define MG_OP_CASCADE_SYNC_RD (1 << 1)
+#define MG_OP_CASCADE_SYNC_WR (1 << 2)
+#define MG_OP_INTERLEAVE (1 << 3)
+
+/* synchronous */
+#define MG_BURST_LAT_4 (3 << 4)
+#define MG_BURST_LAT_5 (4 << 4)
+#define MG_BURST_LAT_6 (5 << 4)
+#define MG_BURST_LAT_7 (6 << 4)
+#define MG_BURST_LAT_8 (7 << 4)
+#define MG_BURST_LEN_4 (1 << 1)
+#define MG_BURST_LEN_8 (2 << 1)
+#define MG_BURST_LEN_16 (3 << 1)
+#define MG_BURST_LEN_32 (4 << 1)
+#define MG_BURST_LEN_CONT (0 << 1)
+
+/* timeout value (unit: ms) */
+#define MG_TMAX_CONF_TO_CMD	1
+#define MG_TMAX_WAIT_RD_DRQ	10
+#define MG_TMAX_WAIT_WR_DRQ	500
+#define MG_TMAX_RST_TO_BUSY	10
+#define MG_TMAX_HDRST_TO_RDY	500
+#define MG_TMAX_SWRST_TO_RDY	500
+#define MG_TMAX_RSTOUT		3000
+
+/* device attribution */
+/* use mflash as boot device */
+#define MG_BOOT_DEV		(1 << 0)
+/* use mflash as storage device */
+#define MG_STORAGE_DEV		(1 << 1)
+/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
+#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
+
+#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
+
+/* names of GPIO resource */
+#define MG_RST_PIN	"mg_rst"
+/* except MG_BOOT_DEV, reset-out pin should be assigned */
+#define MG_RSTOUT_PIN	"mg_rstout"
+
+/* private driver data */
+struct mg_drv_data {
+	/* disk resource */
+	u32 use_polling;
+
+	/* device attribution */
+	u32 dev_attr;
+
+	/* internally used */
+	struct mg_host *host;
+};
+
+/* main structure for mflash driver */
+struct mg_host {
+	struct device *dev;
+
+	struct request_queue *breq;
+	struct request *req;
+	spinlock_t lock;
+	struct gendisk *gd;
+
+	struct timer_list timer;
+	void (*mg_do_intr) (struct mg_host *);
+
+	u16 id[ATA_ID_WORDS];
+
+	u16 cyls;
+	u16 heads;
+	u16 sectors;
+	u32 n_sectors;
+	u32 nres_sectors;
+
+	void __iomem *dev_base;
+	unsigned int irq;
+	unsigned int rst;
+	unsigned int rstout;
+
+	u32 major;
+	u32 error;
+};
+
+/*
+ * Debugging macro and defines
+ */
+#undef DO_MG_DEBUG
+#ifdef DO_MG_DEBUG
+#  define MG_DBG(fmt, args...) \
+	printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args)
+#else /* CONFIG_MG_DEBUG */
+#  define MG_DBG(fmt, args...) do { } while (0)
+#endif /* CONFIG_MG_DEBUG */
+
 static void mg_request(struct request_queue *);
 
+static bool mg_end_request(struct mg_host *host, int err, unsigned int nr_bytes)
+{
+	if (__blk_end_request(host->req, err, nr_bytes))
+		return true;
+
+	host->req = NULL;
+	return false;
+}
+
+static bool mg_end_request_cur(struct mg_host *host, int err)
+{
+	return mg_end_request(host, err, blk_rq_cur_bytes(host->req));
+}
+
 static void mg_dump_status(const char *msg, unsigned int stat,
 		struct mg_host *host)
 {
 	char *name = MG_DISK_NAME;
-	struct request *req;
 
-	if (host->breq) {
-		req = elv_next_request(host->breq);
-		if (req)
-			name = req->rq_disk->disk_name;
-	}
+	if (host->req)
+		name = host->req->rq_disk->disk_name;
 
 	printk(KERN_ERR "%s: %s: status=0x%02x { ", name, msg, stat & 0xff);
-	if (stat & MG_REG_STATUS_BIT_BUSY)
+	if (stat & ATA_BUSY)
 		printk("Busy ");
-	if (stat & MG_REG_STATUS_BIT_READY)
+	if (stat & ATA_DRDY)
 		printk("DriveReady ");
-	if (stat & MG_REG_STATUS_BIT_WRITE_FAULT)
+	if (stat & ATA_DF)
 		printk("WriteFault ");
-	if (stat & MG_REG_STATUS_BIT_SEEK_DONE)
+	if (stat & ATA_DSC)
 		printk("SeekComplete ");
-	if (stat & MG_REG_STATUS_BIT_DATA_REQ)
+	if (stat & ATA_DRQ)
 		printk("DataRequest ");
-	if (stat & MG_REG_STATUS_BIT_CORRECTED_ERROR)
+	if (stat & ATA_CORR)
 		printk("CorrectedError ");
-	if (stat & MG_REG_STATUS_BIT_ERROR)
+	if (stat & ATA_ERR)
 		printk("Error ");
 	printk("}\n");
-	if ((stat & MG_REG_STATUS_BIT_ERROR) == 0) {
+	if ((stat & ATA_ERR) == 0) {
 		host->error = 0;
 	} else {
 		host->error = inb((unsigned long)host->dev_base + MG_REG_ERROR);
 		printk(KERN_ERR "%s: %s: error=0x%02x { ", name, msg,
 				host->error & 0xff);
-		if (host->error & MG_REG_ERR_BBK)
+		if (host->error & ATA_BBK)
 			printk("BadSector ");
-		if (host->error & MG_REG_ERR_UNC)
+		if (host->error & ATA_UNC)
 			printk("UncorrectableError ");
-		if (host->error & MG_REG_ERR_IDNF)
+		if (host->error & ATA_IDNF)
 			printk("SectorIdNotFound ");
-		if (host->error & MG_REG_ERR_ABRT)
+		if (host->error & ATA_ABORTED)
 			printk("DriveStatusError ");
-		if (host->error & MG_REG_ERR_AMNF)
+		if (host->error & ATA_AMNF)
 			printk("AddrMarkNotFound ");
 		printk("}");
-		if (host->error &
-				(MG_REG_ERR_BBK | MG_REG_ERR_UNC |
-				 MG_REG_ERR_IDNF | MG_REG_ERR_AMNF)) {
-			if (host->breq) {
-				req = elv_next_request(host->breq);
-				if (req)
-					printk(", sector=%u", (u32)req->sector);
-			}
-
+		if (host->error & (ATA_BBK | ATA_UNC | ATA_IDNF | ATA_AMNF)) {
+			if (host->req)
+				printk(", sector=%u",
+				       (unsigned int)blk_rq_pos(host->req));
 		}
 		printk("\n");
 	}
@@ -100,12 +249,12 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
 
 	do {
 		cur_jiffies = jiffies;
-		if (status & MG_REG_STATUS_BIT_BUSY) {
-			if (expect == MG_REG_STATUS_BIT_BUSY)
+		if (status & ATA_BUSY) {
+			if (expect == ATA_BUSY)
 				break;
 		} else {
 			/* Check the error condition! */
-			if (status & MG_REG_STATUS_BIT_ERROR) {
+			if (status & ATA_ERR) {
 				mg_dump_status("mg_wait", status, host);
 				break;
 			}
@@ -114,8 +263,8 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
 				if (MG_READY_OK(status))
 					break;
 
-			if (expect == MG_REG_STATUS_BIT_DATA_REQ)
-				if (status & MG_REG_STATUS_BIT_DATA_REQ)
+			if (expect == ATA_DRQ)
+				if (status & ATA_DRQ)
 					break;
 		}
 		if (!msec) {
@@ -173,6 +322,42 @@ static irqreturn_t mg_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/* local copy of ata_id_string() */
+static void mg_id_string(const u16 *id, unsigned char *s,
+			 unsigned int ofs, unsigned int len)
+{
+	unsigned int c;
+
+	BUG_ON(len & 1);
+
+	while (len > 0) {
+		c = id[ofs] >> 8;
+		*s = c;
+		s++;
+
+		c = id[ofs] & 0xff;
+		*s = c;
+		s++;
+
+		ofs++;
+		len -= 2;
+	}
+}
+
+/* local copy of ata_id_c_string() */
+static void mg_id_c_string(const u16 *id, unsigned char *s,
+			   unsigned int ofs, unsigned int len)
+{
+	unsigned char *p;
+
+	mg_id_string(id, s, ofs, len - 1);
+
+	p = s + strnlen(s, len - 1);
+	while (p > s && p[-1] == ' ')
+		p--;
+	*p = '\0';
+}
+
 static int mg_get_disk_id(struct mg_host *host)
 {
 	u32 i;
@@ -184,12 +369,10 @@ static int mg_get_disk_id(struct mg_host *host)
 	char serial[ATA_ID_SERNO_LEN + 1];
 
 	if (!prv_data->use_polling)
-		outb(MG_REG_CTRL_INTR_DISABLE,
-				(unsigned long)host->dev_base +
-				MG_REG_DRV_CTRL);
+		outb(ATA_NIEN, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 
 	outb(MG_CMD_ID, (unsigned long)host->dev_base + MG_REG_COMMAND);
-	err = mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, MG_TMAX_WAIT_RD_DRQ);
+	err = mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_RD_DRQ);
 	if (err)
 		return err;
 
@@ -219,9 +402,9 @@ static int mg_get_disk_id(struct mg_host *host)
 		host->n_sectors -= host->nres_sectors;
 	}
 
-	ata_id_c_string(id, fwrev, ATA_ID_FW_REV, sizeof(fwrev));
-	ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model));
-	ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+	mg_id_c_string(id, fwrev, ATA_ID_FW_REV, sizeof(fwrev));
+	mg_id_c_string(id, model, ATA_ID_PROD, sizeof(model));
+	mg_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
 	printk(KERN_INFO "mg_disk: model: %s\n", model);
 	printk(KERN_INFO "mg_disk: firm: %.8s\n", fwrev);
 	printk(KERN_INFO "mg_disk: serial: %s\n", serial);
@@ -229,8 +412,7 @@ static int mg_get_disk_id(struct mg_host *host)
 			host->n_sectors, host->nres_sectors);
 
 	if (!prv_data->use_polling)
-		outb(MG_REG_CTRL_INTR_ENABLE, (unsigned long)host->dev_base +
-				MG_REG_DRV_CTRL);
+		outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 
 	return err;
 }
@@ -244,7 +426,7 @@ static int mg_disk_init(struct mg_host *host)
 
 	/* hdd rst low */
 	gpio_set_value(host->rst, 0);
-	err = mg_wait(host, MG_REG_STATUS_BIT_BUSY, MG_TMAX_RST_TO_BUSY);
+	err = mg_wait(host, ATA_BUSY, MG_TMAX_RST_TO_BUSY);
 	if (err)
 		return err;
 
@@ -255,17 +437,14 @@ static int mg_disk_init(struct mg_host *host)
 		return err;
 
 	/* soft reset on */
-	outb(MG_REG_CTRL_RESET |
-			(prv_data->use_polling ? MG_REG_CTRL_INTR_DISABLE :
-			 MG_REG_CTRL_INTR_ENABLE),
+	outb(ATA_SRST | (prv_data->use_polling ? ATA_NIEN : 0),
 			(unsigned long)host->dev_base + MG_REG_DRV_CTRL);
-	err = mg_wait(host, MG_REG_STATUS_BIT_BUSY, MG_TMAX_RST_TO_BUSY);
+	err = mg_wait(host, ATA_BUSY, MG_TMAX_RST_TO_BUSY);
 	if (err)
 		return err;
 
 	/* soft reset off */
-	outb(prv_data->use_polling ? MG_REG_CTRL_INTR_DISABLE :
-			MG_REG_CTRL_INTR_ENABLE,
+	outb(prv_data->use_polling ? ATA_NIEN : 0,
 			(unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 	err = mg_wait(host, MG_STAT_READY, MG_TMAX_SWRST_TO_RDY);
 	if (err)
@@ -281,11 +460,10 @@ static int mg_disk_init(struct mg_host *host)
 
 static void mg_bad_rw_intr(struct mg_host *host)
 {
-	struct request *req = elv_next_request(host->breq);
-	if (req != NULL)
-		if (++req->errors >= MG_MAX_ERRORS ||
-				host->error == MG_ERR_TIMEOUT)
-			end_request(req, 0);
+	if (host->req)
+		if (++host->req->errors >= MG_MAX_ERRORS ||
+		    host->error == MG_ERR_TIMEOUT)
+			mg_end_request_cur(host, -EIO);
 }
 
 static unsigned int mg_out(struct mg_host *host,
@@ -311,7 +489,7 @@ static unsigned int mg_out(struct mg_host *host,
 			MG_REG_CYL_LOW);
 	outb((u8)(sect_num >> 16), (unsigned long)host->dev_base +
 			MG_REG_CYL_HIGH);
-	outb((u8)((sect_num >> 24) | MG_REG_HEAD_LBA_MODE),
+	outb((u8)((sect_num >> 24) | ATA_LBA | ATA_DEVICE_OBS),
 			(unsigned long)host->dev_base + MG_REG_DRV_HEAD);
 	outb(cmd, (unsigned long)host->dev_base + MG_REG_COMMAND);
 	return MG_ERR_NONE;
@@ -319,105 +497,77 @@ static unsigned int mg_out(struct mg_host *host,
 
 static void mg_read(struct request *req)
 {
-	u32 remains, j;
+	u32 j;
 	struct mg_host *host = req->rq_disk->private_data;
 
-	remains = req->nr_sectors;
-
-	if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) !=
-			MG_ERR_NONE)
+	if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+		   MG_CMD_RD, NULL) != MG_ERR_NONE)
 		mg_bad_rw_intr(host);
 
 	MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
-			remains, req->sector, req->buffer);
+	       blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+
+	do {
+		u16 *buff = (u16 *)req->buffer;
 
-	while (remains) {
-		if (mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ,
-					MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
+		if (mg_wait(host, ATA_DRQ,
+			    MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return;
 		}
-		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) {
-			*(u16 *)req->buffer =
-				inw((unsigned long)host->dev_base +
-						MG_BUFF_OFFSET + (j << 1));
-			req->buffer += 2;
-		}
-
-		req->sector++;
-		req->errors = 0;
-		remains = --req->nr_sectors;
-		--req->current_nr_sectors;
-
-		if (req->current_nr_sectors <= 0) {
-			MG_DBG("remain : %d sects\n", remains);
-			end_request(req, 1);
-			if (remains > 0)
-				req = elv_next_request(host->breq);
-		}
+		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
+			*buff++ = inw((unsigned long)host->dev_base +
+				      MG_BUFF_OFFSET + (j << 1));
 
 		outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
-	}
+	} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
 static void mg_write(struct request *req)
 {
-	u32 remains, j;
+	u32 j;
 	struct mg_host *host = req->rq_disk->private_data;
 
-	remains = req->nr_sectors;
-
-	if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) !=
-			MG_ERR_NONE) {
+	if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+		   MG_CMD_WR, NULL) != MG_ERR_NONE) {
 		mg_bad_rw_intr(host);
 		return;
 	}
 
-
 	MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
-			remains, req->sector, req->buffer);
-	while (remains) {
-		if (mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ,
-					MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+	       blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+
+	do {
+		u16 *buff = (u16 *)req->buffer;
+
+	if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return;
 		}
-		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) {
-			outw(*(u16 *)req->buffer,
-					(unsigned long)host->dev_base +
-					MG_BUFF_OFFSET + (j << 1));
-			req->buffer += 2;
-		}
-		req->sector++;
-		remains = --req->nr_sectors;
-		--req->current_nr_sectors;
-
-		if (req->current_nr_sectors <= 0) {
-			MG_DBG("remain : %d sects\n", remains);
-			end_request(req, 1);
-			if (remains > 0)
-				req = elv_next_request(host->breq);
-		}
+		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
+			outw(*buff++, (unsigned long)host->dev_base +
+				      MG_BUFF_OFFSET + (j << 1));
 
 		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
-	}
+	} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
 static void mg_read_intr(struct mg_host *host)
 {
+	struct request *req = host->req;
 	u32 i;
-	struct request *req;
+	u16 *buff;
 
 	/* check status */
 	do {
 		i = inb((unsigned long)host->dev_base + MG_REG_STATUS);
-		if (i & MG_REG_STATUS_BIT_BUSY)
+		if (i & ATA_BUSY)
 			break;
 		if (!MG_READY_OK(i))
 			break;
-		if (i & MG_REG_STATUS_BIT_DATA_REQ)
+		if (i & ATA_DRQ)
 			goto ok_to_read;
 	} while (0);
 	mg_dump_status("mg_read_intr", i, host);
@@ -427,60 +577,42 @@ static void mg_read_intr(struct mg_host *host)
 
 ok_to_read:
 	/* get current segment of request */
-	req = elv_next_request(host->breq);
+	buff = (u16 *)req->buffer;
 
 	/* read 1 sector */
-	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
-		*(u16 *)req->buffer =
-			inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
-					(i << 1));
-		req->buffer += 2;
-	}
+	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+		*buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+			      (i << 1));
 
-	/* manipulate request */
 	MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
-			req->sector, req->nr_sectors - 1, req->buffer);
-
-	req->sector++;
-	req->errors = 0;
-	i = --req->nr_sectors;
-	--req->current_nr_sectors;
-
-	/* let know if current segment done */
-	if (req->current_nr_sectors <= 0)
-		end_request(req, 1);
-
-	/* set handler if read remains */
-	if (i > 0) {
-		host->mg_do_intr = mg_read_intr;
-		mod_timer(&host->timer, jiffies + 3 * HZ);
-	}
+	       blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
 
 	/* send read confirm */
 	outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND);
 
-	/* goto next request */
-	if (!i)
+	if (mg_end_request(host, 0, MG_SECTOR_SIZE)) {
+		/* set handler if read remains */
+		host->mg_do_intr = mg_read_intr;
+		mod_timer(&host->timer, jiffies + 3 * HZ);
+	} else /* goto next request */
 		mg_request(host->breq);
 }
 
 static void mg_write_intr(struct mg_host *host)
 {
+	struct request *req = host->req;
 	u32 i, j;
 	u16 *buff;
-	struct request *req;
-
-	/* get current segment of request */
-	req = elv_next_request(host->breq);
+	bool rem;
 
 	/* check status */
 	do {
 		i = inb((unsigned long)host->dev_base + MG_REG_STATUS);
-		if (i & MG_REG_STATUS_BIT_BUSY)
+		if (i & ATA_BUSY)
 			break;
 		if (!MG_READY_OK(i))
 			break;
-		if ((req->nr_sectors <= 1) || (i & MG_REG_STATUS_BIT_DATA_REQ))
+		if ((blk_rq_sectors(req) <= 1) || (i & ATA_DRQ))
 			goto ok_to_write;
 	} while (0);
 	mg_dump_status("mg_write_intr", i, host);
@@ -489,18 +621,8 @@ static void mg_write_intr(struct mg_host *host)
 	return;
 
 ok_to_write:
-	/* manipulate request */
-	req->sector++;
-	i = --req->nr_sectors;
-	--req->current_nr_sectors;
-	req->buffer += MG_SECTOR_SIZE;
-
-	/* let know if current segment or all done */
-	if (!i || (req->bio && req->current_nr_sectors <= 0))
-		end_request(req, 1);
-
-	/* write 1 sector and set handler if remains */
-	if (i > 0) {
+	if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
+		/* write 1 sector and set handler if remains */
 		buff = (u16 *)req->buffer;
 		for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
 			outw(*buff, (unsigned long)host->dev_base +
@@ -508,7 +630,7 @@ ok_to_write:
 			buff++;
 		}
 		MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
-				req->sector, req->nr_sectors, req->buffer);
+		       blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
 		host->mg_do_intr = mg_write_intr;
 		mod_timer(&host->timer, jiffies + 3 * HZ);
 	}
@@ -516,7 +638,7 @@ ok_to_write:
 	/* send write confirm */
 	outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND);
 
-	if (!i)
+	if (!rem)
 		mg_request(host->breq);
 }
 
@@ -524,49 +646,45 @@ void mg_times_out(unsigned long data)
 {
 	struct mg_host *host = (struct mg_host *)data;
 	char *name;
-	struct request *req;
 
 	spin_lock_irq(&host->lock);
 
-	req = elv_next_request(host->breq);
-	if (!req)
+	if (!host->req)
 		goto out_unlock;
 
 	host->mg_do_intr = NULL;
 
-	name = req->rq_disk->disk_name;
+	name = host->req->rq_disk->disk_name;
 	printk(KERN_DEBUG "%s: timeout\n", name);
 
 	host->error = MG_ERR_TIMEOUT;
 	mg_bad_rw_intr(host);
 
-	mg_request(host->breq);
 out_unlock:
+	mg_request(host->breq);
 	spin_unlock_irq(&host->lock);
 }
 
 static void mg_request_poll(struct request_queue *q)
 {
-	struct request *req;
-	struct mg_host *host;
+	struct mg_host *host = q->queuedata;
 
-	while ((req = elv_next_request(q)) != NULL) {
-		host = req->rq_disk->private_data;
-		if (blk_fs_request(req)) {
-			switch (rq_data_dir(req)) {
-			case READ:
-				mg_read(req);
-				break;
-			case WRITE:
-				mg_write(req);
-				break;
-			default:
-				printk(KERN_WARNING "%s:%d unknown command\n",
-						__func__, __LINE__);
-				end_request(req, 0);
+	while (1) {
+		if (!host->req) {
+			host->req = blk_fetch_request(q);
+			if (!host->req)
 				break;
-			}
 		}
+
+		if (unlikely(!blk_fs_request(host->req))) {
+			mg_end_request_cur(host, -EIO);
+			continue;
+		}
+
+		if (rq_data_dir(host->req) == READ)
+			mg_read(host->req);
+		else
+			mg_write(host->req);
 	}
 }
 
@@ -588,18 +706,15 @@ static unsigned int mg_issue_req(struct request *req,
 		break;
 	case WRITE:
 		/* TODO : handler */
-		outb(MG_REG_CTRL_INTR_DISABLE,
-				(unsigned long)host->dev_base +
-				MG_REG_DRV_CTRL);
+		outb(ATA_NIEN, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 		if (mg_out(host, sect_num, sect_cnt, MG_CMD_WR, &mg_write_intr)
 				!= MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return host->error;
 		}
 		del_timer(&host->timer);
-		mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, MG_TMAX_WAIT_WR_DRQ);
-		outb(MG_REG_CTRL_INTR_ENABLE, (unsigned long)host->dev_base +
-				MG_REG_DRV_CTRL);
+		mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ);
+		outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 		if (host->error) {
 			mg_bad_rw_intr(host);
 			return host->error;
@@ -614,11 +729,6 @@ static unsigned int mg_issue_req(struct request *req,
 		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
 		break;
-	default:
-		printk(KERN_WARNING "%s:%d unknown command\n",
-				__func__, __LINE__);
-		end_request(req, 0);
-		break;
 	}
 	return MG_ERR_NONE;
 }
@@ -626,16 +736,17 @@ static unsigned int mg_issue_req(struct request *req,
 /* This function also called from IRQ context */
 static void mg_request(struct request_queue *q)
 {
+	struct mg_host *host = q->queuedata;
 	struct request *req;
-	struct mg_host *host;
 	u32 sect_num, sect_cnt;
 
 	while (1) {
-		req = elv_next_request(q);
-		if (!req)
-			return;
-
-		host = req->rq_disk->private_data;
+		if (!host->req) {
+			host->req = blk_fetch_request(q);
+			if (!host->req)
+				break;
+		}
+		req = host->req;
 
 		/* check unwanted request call */
 		if (host->mg_do_intr)
@@ -643,9 +754,9 @@ static void mg_request(struct request_queue *q)
 
 		del_timer(&host->timer);
 
-		sect_num = req->sector;
+		sect_num = blk_rq_pos(req);
 		/* deal whole segments */
-		sect_cnt = req->nr_sectors;
+		sect_cnt = blk_rq_sectors(req);
 
 		/* sanity check */
 		if (sect_num >= get_capacity(req->rq_disk) ||
@@ -655,12 +766,14 @@ static void mg_request(struct request_queue *q)
 					"%s: bad access: sector=%d, count=%d\n",
 					req->rq_disk->disk_name,
 					sect_num, sect_cnt);
-			end_request(req, 0);
+			mg_end_request_cur(host, -EIO);
 			continue;
 		}
 
-		if (!blk_fs_request(req))
-			return;
+		if (unlikely(!blk_fs_request(req))) {
+			mg_end_request_cur(host, -EIO);
+			continue;
+		}
 
 		if (!mg_issue_req(req, host, sect_num, sect_cnt))
 			return;
@@ -690,9 +803,7 @@ static int mg_suspend(struct platform_device *plat_dev, pm_message_t state)
 		return -EIO;
 
 	if (!prv_data->use_polling)
-		outb(MG_REG_CTRL_INTR_DISABLE,
-				(unsigned long)host->dev_base +
-				MG_REG_DRV_CTRL);
+		outb(ATA_NIEN, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 
 	outb(MG_CMD_SLEEP, (unsigned long)host->dev_base + MG_REG_COMMAND);
 	/* wait until mflash deep sleep */
@@ -700,9 +811,7 @@ static int mg_suspend(struct platform_device *plat_dev, pm_message_t state)
 
 	if (mg_wait(host, MG_STAT_READY, MG_TMAX_CONF_TO_CMD)) {
 		if (!prv_data->use_polling)
-			outb(MG_REG_CTRL_INTR_ENABLE,
-					(unsigned long)host->dev_base +
-					MG_REG_DRV_CTRL);
+			outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 		return -EIO;
 	}
 
@@ -725,8 +834,7 @@ static int mg_resume(struct platform_device *plat_dev)
 		return -EIO;
 
 	if (!prv_data->use_polling)
-		outb(MG_REG_CTRL_INTR_ENABLE, (unsigned long)host->dev_base +
-				MG_REG_DRV_CTRL);
+		outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL);
 
 	return 0;
 }
@@ -877,6 +985,7 @@ static int mg_probe(struct platform_device *plat_dev)
 				__func__, __LINE__);
 		goto probe_err_5;
 	}
+	host->breq->queuedata = host;
 
 	/* mflash is random device, thanx for the noop */
 	elevator_exit(host->breq->elevator);
@@ -887,7 +996,7 @@ static int mg_probe(struct platform_device *plat_dev)
 		goto probe_err_6;
 	}
 	blk_queue_max_sectors(host->breq, MG_MAX_SECTS);
-	blk_queue_hardsect_size(host->breq, MG_SECTOR_SIZE);
+	blk_queue_logical_block_size(host->breq, MG_SECTOR_SIZE);
 
 	init_timer(&host->timer);
 	host->timer.function = mg_times_out;
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 4d6de4f15cc..5d23ffad7c7 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -110,7 +110,7 @@ static void nbd_end_request(struct request *req)
 			req, error ? "failed" : "done");
 
 	spin_lock_irqsave(q->queue_lock, flags);
-	__blk_end_request(req, error, req->nr_sectors << 9);
+	__blk_end_request_all(req, error);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 
@@ -231,19 +231,19 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req)
 {
 	int result, flags;
 	struct nbd_request request;
-	unsigned long size = req->nr_sectors << 9;
+	unsigned long size = blk_rq_bytes(req);
 
 	request.magic = htonl(NBD_REQUEST_MAGIC);
 	request.type = htonl(nbd_cmd(req));
-	request.from = cpu_to_be64((u64) req->sector << 9);
+	request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
 	request.len = htonl(size);
 	memcpy(request.handle, &req, sizeof(req));
 
-	dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%luB)\n",
+	dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n",
 			lo->disk->disk_name, req,
 			nbdcmd_to_ascii(nbd_cmd(req)),
-			(unsigned long long)req->sector << 9,
-			req->nr_sectors << 9);
+			(unsigned long long)blk_rq_pos(req) << 9,
+			blk_rq_bytes(req));
 	result = sock_xmit(lo, 1, &request, sizeof(request),
 			(nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0);
 	if (result <= 0) {
@@ -533,11 +533,9 @@ static void do_nbd_request(struct request_queue *q)
 {
 	struct request *req;
 	
-	while ((req = elv_next_request(q)) != NULL) {
+	while ((req = blk_fetch_request(q)) != NULL) {
 		struct nbd_device *lo;
 
-		blkdev_dequeue_request(req);
-
 		spin_unlock_irq(q->queue_lock);
 
 		dprintk(DBG_BLKDEV, "%s: request %p: dequeued (flags=%x)\n",
@@ -580,13 +578,6 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
 		blk_rq_init(NULL, &sreq);
 		sreq.cmd_type = REQ_TYPE_SPECIAL;
 		nbd_cmd(&sreq) = NBD_CMD_DISC;
-		/*
-		 * Set these to sane values in case server implementation
-		 * fails to check the request type first and also to keep
-		 * debugging output cleaner.
-		 */
-		sreq.sector = 0;
-		sreq.nr_sectors = 0;
 		if (!lo->sock)
 			return -EINVAL;
 		nbd_send_req(lo, &sreq);
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index e91d4b4b014..911dfd98d81 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -719,32 +719,37 @@ static void do_pcd_request(struct request_queue * q)
 	if (pcd_busy)
 		return;
 	while (1) {
-		pcd_req = elv_next_request(q);
-		if (!pcd_req)
-			return;
+		if (!pcd_req) {
+			pcd_req = blk_fetch_request(q);
+			if (!pcd_req)
+				return;
+		}
 
 		if (rq_data_dir(pcd_req) == READ) {
 			struct pcd_unit *cd = pcd_req->rq_disk->private_data;
 			if (cd != pcd_current)
 				pcd_bufblk = -1;
 			pcd_current = cd;
-			pcd_sector = pcd_req->sector;
-			pcd_count = pcd_req->current_nr_sectors;
+			pcd_sector = blk_rq_pos(pcd_req);
+			pcd_count = blk_rq_cur_sectors(pcd_req);
 			pcd_buf = pcd_req->buffer;
 			pcd_busy = 1;
 			ps_set_intr(do_pcd_read, NULL, 0, nice);
 			return;
-		} else
-			end_request(pcd_req, 0);
+		} else {
+			__blk_end_request_all(pcd_req, -EIO);
+			pcd_req = NULL;
+		}
 	}
 }
 
-static inline void next_request(int success)
+static inline void next_request(int err)
 {
 	unsigned long saved_flags;
 
 	spin_lock_irqsave(&pcd_lock, saved_flags);
-	end_request(pcd_req, success);
+	if (!__blk_end_request_cur(pcd_req, err))
+		pcd_req = NULL;
 	pcd_busy = 0;
 	do_pcd_request(pcd_queue);
 	spin_unlock_irqrestore(&pcd_lock, saved_flags);
@@ -781,7 +786,7 @@ static void pcd_start(void)
 
 	if (pcd_command(pcd_current, rd_cmd, 2048, "read block")) {
 		pcd_bufblk = -1;
-		next_request(0);
+		next_request(-EIO);
 		return;
 	}
 
@@ -796,7 +801,7 @@ static void do_pcd_read(void)
 	pcd_retries = 0;
 	pcd_transfer();
 	if (!pcd_count) {
-		next_request(1);
+		next_request(0);
 		return;
 	}
 
@@ -815,7 +820,7 @@ static void do_pcd_read_drq(void)
 			return;
 		}
 		pcd_bufblk = -1;
-		next_request(0);
+		next_request(-EIO);
 		return;
 	}
 
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 9299455b0af..bf5955b3d87 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -410,10 +410,12 @@ static void run_fsm(void)
 				pd_claimed = 0;
 				phase = NULL;
 				spin_lock_irqsave(&pd_lock, saved_flags);
-				end_request(pd_req, res);
-				pd_req = elv_next_request(pd_queue);
-				if (!pd_req)
-					stop = 1;
+				if (!__blk_end_request_cur(pd_req,
+						res == Ok ? 0 : -EIO)) {
+					pd_req = blk_fetch_request(pd_queue);
+					if (!pd_req)
+						stop = 1;
+				}
 				spin_unlock_irqrestore(&pd_lock, saved_flags);
 				if (stop)
 					return;
@@ -443,11 +445,11 @@ static enum action do_pd_io_start(void)
 
 	pd_cmd = rq_data_dir(pd_req);
 	if (pd_cmd == READ || pd_cmd == WRITE) {
-		pd_block = pd_req->sector;
-		pd_count = pd_req->current_nr_sectors;
+		pd_block = blk_rq_pos(pd_req);
+		pd_count = blk_rq_cur_sectors(pd_req);
 		if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
 			return Fail;
-		pd_run = pd_req->nr_sectors;
+		pd_run = blk_rq_sectors(pd_req);
 		pd_buf = pd_req->buffer;
 		pd_retries = 0;
 		if (pd_cmd == READ)
@@ -477,8 +479,8 @@ static int pd_next_buf(void)
 	if (pd_count)
 		return 0;
 	spin_lock_irqsave(&pd_lock, saved_flags);
-	end_request(pd_req, 1);
-	pd_count = pd_req->current_nr_sectors;
+	__blk_end_request_cur(pd_req, 0);
+	pd_count = blk_rq_cur_sectors(pd_req);
 	pd_buf = pd_req->buffer;
 	spin_unlock_irqrestore(&pd_lock, saved_flags);
 	return 0;
@@ -702,7 +704,7 @@ static void do_pd_request(struct request_queue * q)
 {
 	if (pd_req)
 		return;
-	pd_req = elv_next_request(q);
+	pd_req = blk_fetch_request(q);
 	if (!pd_req)
 		return;
 
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index bef3b997ba3..68a90834e99 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -750,12 +750,10 @@ static int pf_ready(void)
 
 static struct request_queue *pf_queue;
 
-static void pf_end_request(int uptodate)
+static void pf_end_request(int err)
 {
-	if (pf_req) {
-		end_request(pf_req, uptodate);
+	if (pf_req && !__blk_end_request_cur(pf_req, err))
 		pf_req = NULL;
-	}
 }
 
 static void do_pf_request(struct request_queue * q)
@@ -763,17 +761,19 @@ static void do_pf_request(struct request_queue * q)
 	if (pf_busy)
 		return;
 repeat:
-	pf_req = elv_next_request(q);
-	if (!pf_req)
-		return;
+	if (!pf_req) {
+		pf_req = blk_fetch_request(q);
+		if (!pf_req)
+			return;
+	}
 
 	pf_current = pf_req->rq_disk->private_data;
-	pf_block = pf_req->sector;
-	pf_run = pf_req->nr_sectors;
-	pf_count = pf_req->current_nr_sectors;
+	pf_block = blk_rq_pos(pf_req);
+	pf_run = blk_rq_sectors(pf_req);
+	pf_count = blk_rq_cur_sectors(pf_req);
 
 	if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
-		pf_end_request(0);
+		pf_end_request(-EIO);
 		goto repeat;
 	}
 
@@ -788,7 +788,7 @@ repeat:
 		pi_do_claimed(pf_current->pi, do_pf_write);
 	else {
 		pf_busy = 0;
-		pf_end_request(0);
+		pf_end_request(-EIO);
 		goto repeat;
 	}
 }
@@ -805,23 +805,22 @@ static int pf_next_buf(void)
 		return 1;
 	if (!pf_count) {
 		spin_lock_irqsave(&pf_spin_lock, saved_flags);
-		pf_end_request(1);
-		pf_req = elv_next_request(pf_queue);
+		pf_end_request(0);
 		spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
 		if (!pf_req)
 			return 1;
-		pf_count = pf_req->current_nr_sectors;
+		pf_count = blk_rq_cur_sectors(pf_req);
 		pf_buf = pf_req->buffer;
 	}
 	return 0;
 }
 
-static inline void next_request(int success)
+static inline void next_request(int err)
 {
 	unsigned long saved_flags;
 
 	spin_lock_irqsave(&pf_spin_lock, saved_flags);
-	pf_end_request(success);
+	pf_end_request(err);
 	pf_busy = 0;
 	do_pf_request(pf_queue);
 	spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
@@ -844,7 +843,7 @@ static void do_pf_read_start(void)
 			pi_do_claimed(pf_current->pi, do_pf_read_start);
 			return;
 		}
-		next_request(0);
+		next_request(-EIO);
 		return;
 	}
 	pf_mask = STAT_DRQ;
@@ -863,7 +862,7 @@ static void do_pf_read_drq(void)
 				pi_do_claimed(pf_current->pi, do_pf_read_start);
 				return;
 			}
-			next_request(0);
+			next_request(-EIO);
 			return;
 		}
 		pi_read_block(pf_current->pi, pf_buf, 512);
@@ -871,7 +870,7 @@ static void do_pf_read_drq(void)
 			break;
 	}
 	pi_disconnect(pf_current->pi);
-	next_request(1);
+	next_request(0);
 }
 
 static void do_pf_write(void)
@@ -890,7 +889,7 @@ static void do_pf_write_start(void)
 			pi_do_claimed(pf_current->pi, do_pf_write_start);
 			return;
 		}
-		next_request(0);
+		next_request(-EIO);
 		return;
 	}
 
@@ -903,7 +902,7 @@ static void do_pf_write_start(void)
 				pi_do_claimed(pf_current->pi, do_pf_write_start);
 				return;
 			}
-			next_request(0);
+			next_request(-EIO);
 			return;
 		}
 		pi_write_block(pf_current->pi, pf_buf, 512);
@@ -923,11 +922,11 @@ static void do_pf_write_done(void)
 			pi_do_claimed(pf_current->pi, do_pf_write_start);
 			return;
 		}
-		next_request(0);
+		next_request(-EIO);
 		return;
 	}
 	pi_disconnect(pf_current->pi);
-	next_request(1);
+	next_request(0);
 }
 
 static int __init pf_init(void)
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index dc7a8c352da..d57f1175948 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -991,13 +991,15 @@ static void pkt_iosched_process_queue(struct pktcdvd_device *pd)
  */
 static int pkt_set_segment_merging(struct pktcdvd_device *pd, struct request_queue *q)
 {
-	if ((pd->settings.size << 9) / CD_FRAMESIZE <= q->max_phys_segments) {
+	if ((pd->settings.size << 9) / CD_FRAMESIZE
+	    <= queue_max_phys_segments(q)) {
 		/*
 		 * The cdrom device can handle one segment/frame
 		 */
 		clear_bit(PACKET_MERGE_SEGS, &pd->flags);
 		return 0;
-	} else if ((pd->settings.size << 9) / PAGE_SIZE <= q->max_phys_segments) {
+	} else if ((pd->settings.size << 9) / PAGE_SIZE
+		   <= queue_max_phys_segments(q)) {
 		/*
 		 * We can handle this case at the expense of some extra memory
 		 * copies during write operations
@@ -2657,7 +2659,7 @@ static void pkt_init_queue(struct pktcdvd_device *pd)
 	struct request_queue *q = pd->disk->queue;
 
 	blk_queue_make_request(q, pkt_make_request);
-	blk_queue_hardsect_size(q, CD_FRAMESIZE);
+	blk_queue_logical_block_size(q, CD_FRAMESIZE);
 	blk_queue_max_sectors(q, PACKET_MAX_SECTORS);
 	blk_queue_merge_bvec(q, pkt_merge_bvec);
 	q->queuedata = pd;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index bccc42bb921..aaeeb544228 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -134,13 +134,12 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 	rq_for_each_segment(bv, req, iter)
 		n++;
 	dev_dbg(&dev->sbd.core,
-		"%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n",
-		__func__, __LINE__, op, n, req->nr_sectors,
-		req->hard_nr_sectors);
+		"%s:%u: %s req has %u bvecs for %u sectors\n",
+		__func__, __LINE__, op, n, blk_rq_sectors(req));
 #endif
 
-	start_sector = req->sector * priv->blocking_factor;
-	sectors = req->nr_sectors * priv->blocking_factor;
+	start_sector = blk_rq_pos(req) * priv->blocking_factor;
+	sectors = blk_rq_sectors(req) * priv->blocking_factor;
 	dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
 		__func__, __LINE__, op, sectors, start_sector);
 
@@ -158,7 +157,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 	if (res) {
 		dev_err(&dev->sbd.core, "%s:%u: %s failed %d\n", __func__,
 			__LINE__, op, res);
-		end_request(req, 0);
+		__blk_end_request_all(req, -EIO);
 		return 0;
 	}
 
@@ -180,7 +179,7 @@ static int ps3disk_submit_flush_request(struct ps3_storage_device *dev,
 	if (res) {
 		dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
 			__func__, __LINE__, res);
-		end_request(req, 0);
+		__blk_end_request_all(req, -EIO);
 		return 0;
 	}
 
@@ -195,7 +194,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev,
 
 	dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
 
-	while ((req = elv_next_request(q))) {
+	while ((req = blk_fetch_request(q))) {
 		if (blk_fs_request(req)) {
 			if (ps3disk_submit_request_sg(dev, req))
 				break;
@@ -205,7 +204,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev,
 				break;
 		} else {
 			blk_dump_rq_flags(req, DEVICE_NAME " bad request");
-			end_request(req, 0);
+			__blk_end_request_all(req, -EIO);
 			continue;
 		}
 	}
@@ -231,7 +230,6 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
 	struct request *req;
 	int res, read, error;
 	u64 tag, status;
-	unsigned long num_sectors;
 	const char *op;
 
 	res = lv1_storage_get_async_status(dev->sbd.dev_id, &tag, &status);
@@ -261,11 +259,9 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
 	if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
 	    req->cmd[0] == REQ_LB_OP_FLUSH) {
 		read = 0;
-		num_sectors = req->hard_cur_sectors;
 		op = "flush";
 	} else {
 		read = !rq_data_dir(req);
-		num_sectors = req->nr_sectors;
 		op = read ? "read" : "write";
 	}
 	if (status) {
@@ -281,7 +277,7 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
 	}
 
 	spin_lock(&priv->lock);
-	__blk_end_request(req, error, num_sectors << 9);
+	__blk_end_request_all(req, error);
 	priv->req = NULL;
 	ps3disk_do_request(dev, priv->queue);
 	spin_unlock(&priv->lock);
@@ -481,7 +477,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
 	blk_queue_max_sectors(queue, dev->bounce_size >> 9);
 	blk_queue_segment_boundary(queue, -1UL);
 	blk_queue_dma_alignment(queue, dev->blk_size-1);
-	blk_queue_hardsect_size(queue, dev->blk_size);
+	blk_queue_logical_block_size(queue, dev->blk_size);
 
 	blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH,
 			  ps3disk_prepare_flush);
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index 5861e33efe6..cbfd9c0aef0 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -212,11 +212,6 @@ static void vdc_end_special(struct vdc_port *port, struct vio_disk_desc *desc)
 	vdc_finish(&port->vio, -err, WAITING_FOR_GEN_CMD);
 }
 
-static void vdc_end_request(struct request *req, int error, int num_sectors)
-{
-	__blk_end_request(req, error, num_sectors << 9);
-}
-
 static void vdc_end_one(struct vdc_port *port, struct vio_dring_state *dr,
 			unsigned int index)
 {
@@ -239,7 +234,7 @@ static void vdc_end_one(struct vdc_port *port, struct vio_dring_state *dr,
 
 	rqe->req = NULL;
 
-	vdc_end_request(req, (desc->status ? -EIO : 0), desc->size >> 9);
+	__blk_end_request(req, (desc->status ? -EIO : 0), desc->size);
 
 	if (blk_queue_stopped(port->disk->queue))
 		blk_start_queue(port->disk->queue);
@@ -421,7 +416,7 @@ static int __send_request(struct request *req)
 		desc->slice = 0;
 	}
 	desc->status = ~0;
-	desc->offset = (req->sector << 9) / port->vdisk_block_size;
+	desc->offset = (blk_rq_pos(req) << 9) / port->vdisk_block_size;
 	desc->size = len;
 	desc->ncookies = err;
 
@@ -446,14 +441,13 @@ out:
 static void do_vdc_request(struct request_queue *q)
 {
 	while (1) {
-		struct request *req = elv_next_request(q);
+		struct request *req = blk_fetch_request(q);
 
 		if (!req)
 			break;
 
-		blkdev_dequeue_request(req);
 		if (__send_request(req) < 0)
-			vdc_end_request(req, -EIO, req->hard_nr_sectors);
+			__blk_end_request_all(req, -EIO);
 	}
 }
 
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index d22cc385693..cf7877fb8a7 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -514,7 +514,7 @@ static int floppy_read_sectors(struct floppy_state *fs,
 			ret = swim_read_sector(fs, side, track, sector,
 						buffer);
 			if (try-- == 0)
-				return -1;
+				return -EIO;
 		} while (ret != 512);
 
 		buffer += ret;
@@ -528,45 +528,31 @@ static void redo_fd_request(struct request_queue *q)
 	struct request *req;
 	struct floppy_state *fs;
 
-	while ((req = elv_next_request(q))) {
+	req = blk_fetch_request(q);
+	while (req) {
+		int err = -EIO;
 
 		fs = req->rq_disk->private_data;
-		if (req->sector < 0 || req->sector >= fs->total_secs) {
-			end_request(req, 0);
-			continue;
-		}
-		if (req->current_nr_sectors == 0) {
-			end_request(req, 1);
-			continue;
-		}
-		if (!fs->disk_in) {
-			end_request(req, 0);
-			continue;
-		}
-		if (rq_data_dir(req) == WRITE) {
-			if (fs->write_protected) {
-				end_request(req, 0);
-				continue;
-			}
-		}
+		if (blk_rq_pos(req) >= fs->total_secs)
+			goto done;
+		if (!fs->disk_in)
+			goto done;
+		if (rq_data_dir(req) == WRITE && fs->write_protected)
+			goto done;
+
 		switch (rq_data_dir(req)) {
 		case WRITE:
 			/* NOT IMPLEMENTED */
-			end_request(req, 0);
 			break;
 		case READ:
-			if (floppy_read_sectors(fs, req->sector,
-						req->current_nr_sectors,
-						req->buffer)) {
-				end_request(req, 0);
-				continue;
-			}
-			req->nr_sectors -= req->current_nr_sectors;
-			req->sector += req->current_nr_sectors;
-			req->buffer += req->current_nr_sectors * 512;
-			end_request(req, 1);
+			err = floppy_read_sectors(fs, blk_rq_pos(req),
+						  blk_rq_cur_sectors(req),
+						  req->buffer);
 			break;
 		}
+	done:
+		if (!__blk_end_request_cur(req, err))
+			req = blk_fetch_request(q);
 	}
 }
 
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 612965307ba..80df93e3cdd 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -251,6 +251,20 @@ static int floppy_release(struct gendisk *disk, fmode_t mode);
 static int floppy_check_change(struct gendisk *disk);
 static int floppy_revalidate(struct gendisk *disk);
 
+static bool swim3_end_request(int err, unsigned int nr_bytes)
+{
+	if (__blk_end_request(fd_req, err, nr_bytes))
+		return true;
+
+	fd_req = NULL;
+	return false;
+}
+
+static bool swim3_end_request_cur(int err)
+{
+	return swim3_end_request(err, blk_rq_cur_bytes(fd_req));
+}
+
 static void swim3_select(struct floppy_state *fs, int sel)
 {
 	struct swim3 __iomem *sw = fs->swim3;
@@ -310,25 +324,27 @@ static void start_request(struct floppy_state *fs)
 		wake_up(&fs->wait);
 		return;
 	}
-	while (fs->state == idle && (req = elv_next_request(swim3_queue))) {
+	while (fs->state == idle) {
+		if (!fd_req) {
+			fd_req = blk_fetch_request(swim3_queue);
+			if (!fd_req)
+				break;
+		}
+		req = fd_req;
 #if 0
-		printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
+		printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
 		       req->rq_disk->disk_name, req->cmd,
-		       (long)req->sector, req->nr_sectors, req->buffer);
-		printk("           errors=%d current_nr_sectors=%ld\n",
-		       req->errors, req->current_nr_sectors);
+		       (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
+		printk("           errors=%d current_nr_sectors=%u\n",
+		       req->errors, blk_rq_cur_sectors(req));
 #endif
 
-		if (req->sector < 0 || req->sector >= fs->total_secs) {
-			end_request(req, 0);
-			continue;
-		}
-		if (req->current_nr_sectors == 0) {
-			end_request(req, 1);
+		if (blk_rq_pos(req) >= fs->total_secs) {
+			swim3_end_request_cur(-EIO);
 			continue;
 		}
 		if (fs->ejected) {
-			end_request(req, 0);
+			swim3_end_request_cur(-EIO);
 			continue;
 		}
 
@@ -336,18 +352,19 @@ static void start_request(struct floppy_state *fs)
 			if (fs->write_prot < 0)
 				fs->write_prot = swim3_readbit(fs, WRITE_PROT);
 			if (fs->write_prot) {
-				end_request(req, 0);
+				swim3_end_request_cur(-EIO);
 				continue;
 			}
 		}
 
-		/* Do not remove the cast. req->sector is now a sector_t and
-		 * can be 64 bits, but it will never go past 32 bits for this
-		 * driver anyway, so we can safely cast it down and not have
-		 * to do a 64/32 division
+		/* Do not remove the cast. blk_rq_pos(req) is now a
+		 * sector_t and can be 64 bits, but it will never go
+		 * past 32 bits for this driver anyway, so we can
+		 * safely cast it down and not have to do a 64/32
+		 * division
 		 */
-		fs->req_cyl = ((long)req->sector) / fs->secpercyl;
-		x = ((long)req->sector) % fs->secpercyl;
+		fs->req_cyl = ((long)blk_rq_pos(req)) / fs->secpercyl;
+		x = ((long)blk_rq_pos(req)) % fs->secpercyl;
 		fs->head = x / fs->secpertrack;
 		fs->req_sector = x % fs->secpertrack + 1;
 		fd_req = req;
@@ -424,7 +441,7 @@ static inline void setup_transfer(struct floppy_state *fs)
 	struct dbdma_cmd *cp = fs->dma_cmd;
 	struct dbdma_regs __iomem *dr = fs->dma;
 
-	if (fd_req->current_nr_sectors <= 0) {
+	if (blk_rq_cur_sectors(fd_req) <= 0) {
 		printk(KERN_ERR "swim3: transfer 0 sectors?\n");
 		return;
 	}
@@ -432,8 +449,8 @@ static inline void setup_transfer(struct floppy_state *fs)
 		n = 1;
 	else {
 		n = fs->secpertrack - fs->req_sector + 1;
-		if (n > fd_req->current_nr_sectors)
-			n = fd_req->current_nr_sectors;
+		if (n > blk_rq_cur_sectors(fd_req))
+			n = blk_rq_cur_sectors(fd_req);
 	}
 	fs->scount = n;
 	swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0);
@@ -508,7 +525,7 @@ static void act(struct floppy_state *fs)
 		case do_transfer:
 			if (fs->cur_cyl != fs->req_cyl) {
 				if (fs->retries > 5) {
-					end_request(fd_req, 0);
+					swim3_end_request_cur(-EIO);
 					fs->state = idle;
 					return;
 				}
@@ -540,7 +557,7 @@ static void scan_timeout(unsigned long data)
 	out_8(&sw->intr_enable, 0);
 	fs->cur_cyl = -1;
 	if (fs->retries > 5) {
-		end_request(fd_req, 0);
+		swim3_end_request_cur(-EIO);
 		fs->state = idle;
 		start_request(fs);
 	} else {
@@ -559,7 +576,7 @@ static void seek_timeout(unsigned long data)
 	out_8(&sw->select, RELAX);
 	out_8(&sw->intr_enable, 0);
 	printk(KERN_ERR "swim3: seek timeout\n");
-	end_request(fd_req, 0);
+	swim3_end_request_cur(-EIO);
 	fs->state = idle;
 	start_request(fs);
 }
@@ -583,7 +600,7 @@ static void settle_timeout(unsigned long data)
 		return;
 	}
 	printk(KERN_ERR "swim3: seek settle timeout\n");
-	end_request(fd_req, 0);
+	swim3_end_request_cur(-EIO);
 	fs->state = idle;
 	start_request(fs);
 }
@@ -593,8 +610,6 @@ static void xfer_timeout(unsigned long data)
 	struct floppy_state *fs = (struct floppy_state *) data;
 	struct swim3 __iomem *sw = fs->swim3;
 	struct dbdma_regs __iomem *dr = fs->dma;
-	struct dbdma_cmd *cp = fs->dma_cmd;
-	unsigned long s;
 	int n;
 
 	fs->timeout_pending = 0;
@@ -605,17 +620,10 @@ static void xfer_timeout(unsigned long data)
 	out_8(&sw->intr_enable, 0);
 	out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
 	out_8(&sw->select, RELAX);
-	if (rq_data_dir(fd_req) == WRITE)
-		++cp;
-	if (ld_le16(&cp->xfer_status) != 0)
-		s = fs->scount - ((ld_le16(&cp->res_count) + 511) >> 9);
-	else
-		s = 0;
-	fd_req->sector += s;
-	fd_req->current_nr_sectors -= s;
 	printk(KERN_ERR "swim3: timeout %sing sector %ld\n",
-	       (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector);
-	end_request(fd_req, 0);
+	       (rq_data_dir(fd_req)==WRITE? "writ": "read"),
+	       (long)blk_rq_pos(fd_req));
+	swim3_end_request_cur(-EIO);
 	fs->state = idle;
 	start_request(fs);
 }
@@ -646,7 +654,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 				printk(KERN_ERR "swim3: seen sector but cyl=ff?\n");
 				fs->cur_cyl = -1;
 				if (fs->retries > 5) {
-					end_request(fd_req, 0);
+					swim3_end_request_cur(-EIO);
 					fs->state = idle;
 					start_request(fs);
 				} else {
@@ -719,9 +727,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 		if (intr & ERROR_INTR) {
 			n = fs->scount - 1 - resid / 512;
 			if (n > 0) {
-				fd_req->sector += n;
-				fd_req->current_nr_sectors -= n;
-				fd_req->buffer += n * 512;
+				blk_update_request(fd_req, 0, n << 9);
 				fs->req_sector += n;
 			}
 			if (fs->retries < 5) {
@@ -730,8 +736,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 			} else {
 				printk("swim3: error %sing block %ld (err=%x)\n",
 				       rq_data_dir(fd_req) == WRITE? "writ": "read",
-				       (long)fd_req->sector, err);
-				end_request(fd_req, 0);
+				       (long)blk_rq_pos(fd_req), err);
+				swim3_end_request_cur(-EIO);
 				fs->state = idle;
 			}
 		} else {
@@ -740,18 +746,12 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 				printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
 				printk(KERN_ERR "  state=%d, dir=%x, intr=%x, err=%x\n",
 				       fs->state, rq_data_dir(fd_req), intr, err);
-				end_request(fd_req, 0);
+				swim3_end_request_cur(-EIO);
 				fs->state = idle;
 				start_request(fs);
 				break;
 			}
-			fd_req->sector += fs->scount;
-			fd_req->current_nr_sectors -= fs->scount;
-			fd_req->buffer += fs->scount * 512;
-			if (fd_req->current_nr_sectors <= 0) {
-				end_request(fd_req, 1);
-				fs->state = idle;
-			} else {
+			if (swim3_end_request(0, fs->scount << 9)) {
 				fs->req_sector += fs->scount;
 				if (fs->req_sector > fs->secpertrack) {
 					fs->req_sector -= fs->secpertrack;
@@ -761,7 +761,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 					}
 				}
 				act(fs);
-			}
+			} else
+				fs->state = idle;
 		}
 		if (fs->state == idle)
 			start_request(fs);
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index ff0448e4bf0..da403b6a7f4 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -749,8 +749,7 @@ static inline void carm_end_request_queued(struct carm_host *host,
 	struct request *req = crq->rq;
 	int rc;
 
-	rc = __blk_end_request(req, error, blk_rq_bytes(req));
-	assert(rc == 0);
+	__blk_end_request_all(req, error);
 
 	rc = carm_put_request(host, crq);
 	assert(rc == 0);
@@ -811,12 +810,10 @@ static void carm_oob_rq_fn(struct request_queue *q)
 
 	while (1) {
 		DPRINTK("get req\n");
-		rq = elv_next_request(q);
+		rq = blk_fetch_request(q);
 		if (!rq)
 			break;
 
-		blkdev_dequeue_request(rq);
-
 		crq = rq->special;
 		assert(crq != NULL);
 		assert(crq->rq == rq);
@@ -847,7 +844,7 @@ static void carm_rq_fn(struct request_queue *q)
 
 queue_one_request:
 	VPRINTK("get req\n");
-	rq = elv_next_request(q);
+	rq = blk_peek_request(q);
 	if (!rq)
 		return;
 
@@ -858,7 +855,7 @@ queue_one_request:
 	}
 	crq->rq = rq;
 
-	blkdev_dequeue_request(rq);
+	blk_start_request(rq);
 
 	if (rq_data_dir(rq) == WRITE) {
 		writing = 1;
@@ -904,10 +901,10 @@ queue_one_request:
 	msg->sg_count	= n_elem;
 	msg->sg_type	= SGT_32BIT;
 	msg->handle	= cpu_to_le32(TAG_ENCODE(crq->tag));
-	msg->lba	= cpu_to_le32(rq->sector & 0xffffffff);
-	tmp		= (rq->sector >> 16) >> 16;
+	msg->lba	= cpu_to_le32(blk_rq_pos(rq) & 0xffffffff);
+	tmp		= (blk_rq_pos(rq) >> 16) >> 16;
 	msg->lba_high	= cpu_to_le16( (u16) tmp );
-	msg->lba_count	= cpu_to_le16(rq->nr_sectors);
+	msg->lba_count	= cpu_to_le16(blk_rq_sectors(rq));
 
 	msg_size = sizeof(struct carm_msg_rw) - sizeof(msg->sg);
 	for (i = 0; i < n_elem; i++) {
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 689cd27ac89..cc54473b8e7 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -360,8 +360,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
     struct ub_scsi_cmd *cmd, struct ub_request *urq);
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status,
-    unsigned int cmd_len);
+static void ub_end_rq(struct request *rq, unsigned int status);
 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
     struct ub_request *urq, struct ub_scsi_cmd *cmd);
 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -627,7 +626,7 @@ static void ub_request_fn(struct request_queue *q)
 	struct ub_lun *lun = q->queuedata;
 	struct request *rq;
 
-	while ((rq = elv_next_request(q)) != NULL) {
+	while ((rq = blk_peek_request(q)) != NULL) {
 		if (ub_request_fn_1(lun, rq) != 0) {
 			blk_stop_queue(q);
 			break;
@@ -643,14 +642,14 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
 	int n_elem;
 
 	if (atomic_read(&sc->poison)) {
-		blkdev_dequeue_request(rq);
-		ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq));
+		blk_start_request(rq);
+		ub_end_rq(rq, DID_NO_CONNECT << 16);
 		return 0;
 	}
 
 	if (lun->changed && !blk_pc_request(rq)) {
-		blkdev_dequeue_request(rq);
-		ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq));
+		blk_start_request(rq);
+		ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
 		return 0;
 	}
 
@@ -660,7 +659,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
 		return -1;
 	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
 
-	blkdev_dequeue_request(rq);
+	blk_start_request(rq);
 
 	urq = &lun->urq;
 	memset(urq, 0, sizeof(struct ub_request));
@@ -702,7 +701,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
 
 drop:
 	ub_put_cmd(lun, cmd);
-	ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq));
+	ub_end_rq(rq, DID_ERROR << 16);
 	return 0;
 }
 
@@ -723,11 +722,11 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
 	/*
 	 * build the command
 	 *
-	 * The call to blk_queue_hardsect_size() guarantees that request
+	 * The call to blk_queue_logical_block_size() guarantees that request
 	 * is aligned, but it is given in terms of 512 byte units, always.
 	 */
-	block = rq->sector >> lun->capacity.bshift;
-	nblks = rq->nr_sectors >> lun->capacity.bshift;
+	block = blk_rq_pos(rq) >> lun->capacity.bshift;
+	nblks = blk_rq_sectors(rq) >> lun->capacity.bshift;
 
 	cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
 	/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -739,7 +738,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
 	cmd->cdb[8] = nblks;
 	cmd->cdb_len = 10;
 
-	cmd->len = rq->nr_sectors * 512;
+	cmd->len = blk_rq_bytes(rq);
 }
 
 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
@@ -747,7 +746,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
 {
 	struct request *rq = urq->rq;
 
-	if (rq->data_len == 0) {
+	if (blk_rq_bytes(rq) == 0) {
 		cmd->dir = UB_DIR_NONE;
 	} else {
 		if (rq_data_dir(rq) == WRITE)
@@ -762,7 +761,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
 	memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
 	cmd->cdb_len = rq->cmd_len;
 
-	cmd->len = rq->data_len;
+	cmd->len = blk_rq_bytes(rq);
 
 	/*
 	 * To reapply this to every URB is not as incorrect as it looks.
@@ -777,16 +776,15 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	struct ub_request *urq = cmd->back;
 	struct request *rq;
 	unsigned int scsi_status;
-	unsigned int cmd_len;
 
 	rq = urq->rq;
 
 	if (cmd->error == 0) {
 		if (blk_pc_request(rq)) {
-			if (cmd->act_len >= rq->data_len)
-				rq->data_len = 0;
+			if (cmd->act_len >= rq->resid_len)
+				rq->resid_len = 0;
 			else
-				rq->data_len -= cmd->act_len;
+				rq->resid_len -= cmd->act_len;
 			scsi_status = 0;
 		} else {
 			if (cmd->act_len != cmd->len) {
@@ -818,17 +816,14 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	urq->rq = NULL;
 
-	cmd_len = cmd->len;
 	ub_put_cmd(lun, cmd);
-	ub_end_rq(rq, scsi_status, cmd_len);
+	ub_end_rq(rq, scsi_status);
 	blk_start_queue(lun->disk->queue);
 }
 
-static void ub_end_rq(struct request *rq, unsigned int scsi_status,
-    unsigned int cmd_len)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status)
 {
 	int error;
-	long rqlen;
 
 	if (scsi_status == 0) {
 		error = 0;
@@ -836,12 +831,7 @@ static void ub_end_rq(struct request *rq, unsigned int scsi_status,
 		error = -EIO;
 		rq->errors = scsi_status;
 	}
-	rqlen = blk_rq_bytes(rq);    /* Oddly enough, this is the residue. */
-	if (__blk_end_request(rq, error, cmd_len)) {
-		printk(KERN_WARNING DRV_NAME
-		    ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n",
-		    blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen);
-	}
+	__blk_end_request_all(rq, error);
 }
 
 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
@@ -1759,7 +1749,7 @@ static int ub_bd_revalidate(struct gendisk *disk)
 	ub_revalidate(lun->udev, lun);
 
 	/* XXX Support sector size switching like in sr.c */
-	blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
+	blk_queue_logical_block_size(disk->queue, lun->capacity.bsize);
 	set_capacity(disk, lun->capacity.nsec);
 	// set_disk_ro(sdkp->disk, lun->readonly);
 
@@ -2334,7 +2324,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
 	blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
 	blk_queue_segment_boundary(q, 0xffffffff);	/* Dubious. */
 	blk_queue_max_sectors(q, UB_MAX_SECTORS);
-	blk_queue_hardsect_size(q, lun->capacity.bsize);
+	blk_queue_logical_block_size(q, lun->capacity.bsize);
 
 	lun->disk = disk;
 	q->queuedata = lun;
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index ecccf65dce2..390d69bb7c4 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -252,7 +252,7 @@ static int send_request(struct request *req)
 	struct viodasd_device *d;
 	unsigned long flags;
 
-	start = (u64)req->sector << 9;
+	start = (u64)blk_rq_pos(req) << 9;
 
 	if (rq_data_dir(req) == READ) {
 		direction = DMA_FROM_DEVICE;
@@ -361,19 +361,17 @@ static void do_viodasd_request(struct request_queue *q)
 	 * back later.
 	 */
 	while (num_req_outstanding < VIOMAXREQ) {
-		req = elv_next_request(q);
+		req = blk_fetch_request(q);
 		if (req == NULL)
 			return;
-		/* dequeue the current request from the queue */
-		blkdev_dequeue_request(req);
 		/* check that request contains a valid command */
 		if (!blk_fs_request(req)) {
-			viodasd_end_request(req, -EIO, req->hard_nr_sectors);
+			viodasd_end_request(req, -EIO, blk_rq_sectors(req));
 			continue;
 		}
 		/* Try sending the request */
 		if (send_request(req) != 0)
-			viodasd_end_request(req, -EIO, req->hard_nr_sectors);
+			viodasd_end_request(req, -EIO, blk_rq_sectors(req));
 	}
 }
 
@@ -590,7 +588,7 @@ static int viodasd_handle_read_write(struct vioblocklpevent *bevent)
 		err = vio_lookup_rc(viodasd_err_table, bevent->sub_result);
 		printk(VIOD_KERN_WARNING "read/write error %d:0x%04x (%s)\n",
 				event->xRc, bevent->sub_result, err->msg);
-		num_sect = req->hard_nr_sectors;
+		num_sect = blk_rq_sectors(req);
 	}
 	qlock = req->q->queue_lock;
 	spin_lock_irqsave(qlock, irq_flags);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 5d34764c8a8..43db3ea15b5 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -37,6 +37,7 @@ struct virtblk_req
 	struct list_head list;
 	struct request *req;
 	struct virtio_blk_outhdr out_hdr;
+	struct virtio_scsi_inhdr in_hdr;
 	u8 status;
 };
 
@@ -50,6 +51,7 @@ static void blk_done(struct virtqueue *vq)
 	spin_lock_irqsave(&vblk->lock, flags);
 	while ((vbr = vblk->vq->vq_ops->get_buf(vblk->vq, &len)) != NULL) {
 		int error;
+
 		switch (vbr->status) {
 		case VIRTIO_BLK_S_OK:
 			error = 0;
@@ -62,7 +64,13 @@ static void blk_done(struct virtqueue *vq)
 			break;
 		}
 
-		__blk_end_request(vbr->req, error, blk_rq_bytes(vbr->req));
+		if (blk_pc_request(vbr->req)) {
+			vbr->req->resid_len = vbr->in_hdr.residual;
+			vbr->req->sense_len = vbr->in_hdr.sense_len;
+			vbr->req->errors = vbr->in_hdr.errors;
+		}
+
+		__blk_end_request_all(vbr->req, error);
 		list_del(&vbr->list);
 		mempool_free(vbr, vblk->pool);
 	}
@@ -74,7 +82,7 @@ static void blk_done(struct virtqueue *vq)
 static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
 		   struct request *req)
 {
-	unsigned long num, out, in;
+	unsigned long num, out = 0, in = 0;
 	struct virtblk_req *vbr;
 
 	vbr = mempool_alloc(vblk->pool, GFP_ATOMIC);
@@ -85,7 +93,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
 	vbr->req = req;
 	if (blk_fs_request(vbr->req)) {
 		vbr->out_hdr.type = 0;
-		vbr->out_hdr.sector = vbr->req->sector;
+		vbr->out_hdr.sector = blk_rq_pos(vbr->req);
 		vbr->out_hdr.ioprio = req_get_ioprio(vbr->req);
 	} else if (blk_pc_request(vbr->req)) {
 		vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD;
@@ -99,18 +107,36 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
 	if (blk_barrier_rq(vbr->req))
 		vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER;
 
-	sg_set_buf(&vblk->sg[0], &vbr->out_hdr, sizeof(vbr->out_hdr));
-	num = blk_rq_map_sg(q, vbr->req, vblk->sg+1);
-	sg_set_buf(&vblk->sg[num+1], &vbr->status, sizeof(vbr->status));
+	sg_set_buf(&vblk->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr));
 
-	if (rq_data_dir(vbr->req) == WRITE) {
-		vbr->out_hdr.type |= VIRTIO_BLK_T_OUT;
-		out = 1 + num;
-		in = 1;
-	} else {
-		vbr->out_hdr.type |= VIRTIO_BLK_T_IN;
-		out = 1;
-		in = 1 + num;
+	/*
+	 * If this is a packet command we need a couple of additional headers.
+	 * Behind the normal outhdr we put a segment with the scsi command
+	 * block, and before the normal inhdr we put the sense data and the
+	 * inhdr with additional status information before the normal inhdr.
+	 */
+	if (blk_pc_request(vbr->req))
+		sg_set_buf(&vblk->sg[out++], vbr->req->cmd, vbr->req->cmd_len);
+
+	num = blk_rq_map_sg(q, vbr->req, vblk->sg + out);
+
+	if (blk_pc_request(vbr->req)) {
+		sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, 96);
+		sg_set_buf(&vblk->sg[num + out + in++], &vbr->in_hdr,
+			   sizeof(vbr->in_hdr));
+	}
+
+	sg_set_buf(&vblk->sg[num + out + in++], &vbr->status,
+		   sizeof(vbr->status));
+
+	if (num) {
+		if (rq_data_dir(vbr->req) == WRITE) {
+			vbr->out_hdr.type |= VIRTIO_BLK_T_OUT;
+			out += num;
+		} else {
+			vbr->out_hdr.type |= VIRTIO_BLK_T_IN;
+			in += num;
+		}
 	}
 
 	if (vblk->vq->vq_ops->add_buf(vblk->vq, vblk->sg, out, in, vbr)) {
@@ -124,12 +150,11 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
 
 static void do_virtblk_request(struct request_queue *q)
 {
-	struct virtio_blk *vblk = NULL;
+	struct virtio_blk *vblk = q->queuedata;
 	struct request *req;
 	unsigned int issued = 0;
 
-	while ((req = elv_next_request(q)) != NULL) {
-		vblk = req->rq_disk->private_data;
+	while ((req = blk_peek_request(q)) != NULL) {
 		BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems);
 
 		/* If this request fails, stop queue and wait for something to
@@ -138,7 +163,7 @@ static void do_virtblk_request(struct request_queue *q)
 			blk_stop_queue(q);
 			break;
 		}
-		blkdev_dequeue_request(req);
+		blk_start_request(req);
 		issued++;
 	}
 
@@ -146,12 +171,51 @@ static void do_virtblk_request(struct request_queue *q)
 		vblk->vq->vq_ops->kick(vblk->vq);
 }
 
+/* return ATA identify data
+ */
+static int virtblk_identify(struct gendisk *disk, void *argp)
+{
+	struct virtio_blk *vblk = disk->private_data;
+	void *opaque;
+	int err = -ENOMEM;
+
+	opaque = kmalloc(VIRTIO_BLK_ID_BYTES, GFP_KERNEL);
+	if (!opaque)
+		goto out;
+
+	err = virtio_config_buf(vblk->vdev, VIRTIO_BLK_F_IDENTIFY,
+		offsetof(struct virtio_blk_config, identify), opaque,
+		VIRTIO_BLK_ID_BYTES);
+
+	if (err)
+		goto out_kfree;
+
+	if (copy_to_user(argp, opaque, VIRTIO_BLK_ID_BYTES))
+		err = -EFAULT;
+
+out_kfree:
+	kfree(opaque);
+out:
+	return err;
+}
+
 static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 			 unsigned cmd, unsigned long data)
 {
-	return scsi_cmd_ioctl(bdev->bd_disk->queue,
-			      bdev->bd_disk, mode, cmd,
-			      (void __user *)data);
+	struct gendisk *disk = bdev->bd_disk;
+	struct virtio_blk *vblk = disk->private_data;
+	void __user *argp = (void __user *)data;
+
+	if (cmd == HDIO_GET_IDENTITY)
+		return virtblk_identify(disk, argp);
+
+	/*
+	 * Only allow the generic SCSI ioctls if the host can support it.
+	 */
+	if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
+		return -ENOIOCTLCMD;
+
+	return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
 }
 
 /* We provide getgeo only to please some old bootloader/partitioning tools */
@@ -190,7 +254,7 @@ static int index_to_minor(int index)
 	return index << PART_BITS;
 }
 
-static int virtblk_probe(struct virtio_device *vdev)
+static int __devinit virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
 	int err;
@@ -224,7 +288,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	sg_init_table(vblk->sg, vblk->sg_elems);
 
 	/* We expect one virtqueue, for output. */
-	vblk->vq = vdev->config->find_vq(vdev, 0, blk_done);
+	vblk->vq = virtio_find_single_vq(vdev, blk_done, "requests");
 	if (IS_ERR(vblk->vq)) {
 		err = PTR_ERR(vblk->vq);
 		goto out_free_vblk;
@@ -249,6 +313,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 		goto out_put_disk;
 	}
 
+	vblk->disk->queue->queuedata = vblk;
 	queue_flag_set_unlocked(QUEUE_FLAG_VIRT, vblk->disk->queue);
 
 	if (index < 26) {
@@ -313,7 +378,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 				offsetof(struct virtio_blk_config, blk_size),
 				&blk_size);
 	if (!err)
-		blk_queue_hardsect_size(vblk->disk->queue, blk_size);
+		blk_queue_logical_block_size(vblk->disk->queue, blk_size);
 
 	add_disk(vblk->disk);
 	return 0;
@@ -323,14 +388,14 @@ out_put_disk:
 out_mempool:
 	mempool_destroy(vblk->pool);
 out_free_vq:
-	vdev->config->del_vq(vblk->vq);
+	vdev->config->del_vqs(vdev);
 out_free_vblk:
 	kfree(vblk);
 out:
 	return err;
 }
 
-static void virtblk_remove(struct virtio_device *vdev)
+static void __devexit virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
 
@@ -344,7 +409,7 @@ static void virtblk_remove(struct virtio_device *vdev)
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);
-	vdev->config->del_vq(vblk->vq);
+	vdev->config->del_vqs(vdev);
 	kfree(vblk);
 }
 
@@ -356,6 +421,7 @@ static struct virtio_device_id id_table[] = {
 static unsigned int features[] = {
 	VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
 	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
+	VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY
 };
 
 static struct virtio_driver virtio_blk = {
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 64b496fce98..ce242921992 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -305,30 +305,25 @@ static void do_xd_request (struct request_queue * q)
 	if (xdc_busy)
 		return;
 
-	while ((req = elv_next_request(q)) != NULL) {
-		unsigned block = req->sector;
-		unsigned count = req->nr_sectors;
-		int rw = rq_data_dir(req);
+	req = blk_fetch_request(q);
+	while (req) {
+		unsigned block = blk_rq_pos(req);
+		unsigned count = blk_rq_cur_sectors(req);
 		XD_INFO *disk = req->rq_disk->private_data;
-		int res = 0;
+		int res = -EIO;
 		int retry;
 
-		if (!blk_fs_request(req)) {
-			end_request(req, 0);
-			continue;
-		}
-		if (block + count > get_capacity(req->rq_disk)) {
-			end_request(req, 0);
-			continue;
-		}
-		if (rw != READ && rw != WRITE) {
-			printk("do_xd_request: unknown request\n");
-			end_request(req, 0);
-			continue;
-		}
+		if (!blk_fs_request(req))
+			goto done;
+		if (block + count > get_capacity(req->rq_disk))
+			goto done;
 		for (retry = 0; (retry < XD_RETRIES) && !res; retry++)
-			res = xd_readwrite(rw, disk, req->buffer, block, count);
-		end_request(req, res);	/* wrap up, 0 = fail, 1 = success */
+			res = xd_readwrite(rq_data_dir(req), disk, req->buffer,
+					   block, count);
+	done:
+		/* wrap up, 0 = success, -errno = fail */
+		if (!__blk_end_request_cur(req, res))
+			req = blk_fetch_request(q);
 	}
 }
 
@@ -418,7 +413,7 @@ static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_
 				printk("xd%c: %s timeout, recalibrating drive\n",'a'+drive,(operation == READ ? "read" : "write"));
 				xd_recalibrate(drive);
 				spin_lock_irq(&xd_lock);
-				return (0);
+				return -EIO;
 			case 2:
 				if (sense[0] & 0x30) {
 					printk("xd%c: %s - ",'a'+drive,(operation == READ ? "reading" : "writing"));
@@ -439,7 +434,7 @@ static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_
 				else
 					printk(" - no valid disk address\n");
 				spin_lock_irq(&xd_lock);
-				return (0);
+				return -EIO;
 		}
 		if (xd_dma_buffer)
 			for (i=0; i < (temp * 0x200); i++)
@@ -448,7 +443,7 @@ static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_
 		count -= temp, buffer += temp * 0x200, block += temp;
 	}
 	spin_lock_irq(&xd_lock);
-	return (1);
+	return 0;
 }
 
 /* xd_recalibrate: recalibrate a given drive and reset controller if necessary */
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8f905089b72..c1996829d5e 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -122,7 +122,7 @@ static DEFINE_SPINLOCK(blkif_io_lock);
 static int get_id_from_freelist(struct blkfront_info *info)
 {
 	unsigned long free = info->shadow_free;
-	BUG_ON(free > BLK_RING_SIZE);
+	BUG_ON(free >= BLK_RING_SIZE);
 	info->shadow_free = info->shadow[free].req.id;
 	info->shadow[free].req.id = 0x0fffffee; /* debug */
 	return free;
@@ -231,7 +231,7 @@ static int blkif_queue_request(struct request *req)
 	info->shadow[id].request = (unsigned long)req;
 
 	ring_req->id = id;
-	ring_req->sector_number = (blkif_sector_t)req->sector;
+	ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
 	ring_req->handle = info->handle;
 
 	ring_req->operation = rq_data_dir(req) ?
@@ -299,25 +299,25 @@ static void do_blkif_request(struct request_queue *rq)
 
 	queued = 0;
 
-	while ((req = elv_next_request(rq)) != NULL) {
+	while ((req = blk_peek_request(rq)) != NULL) {
 		info = req->rq_disk->private_data;
-		if (!blk_fs_request(req)) {
-			end_request(req, 0);
-			continue;
-		}
 
 		if (RING_FULL(&info->ring))
 			goto wait;
 
-		pr_debug("do_blk_req %p: cmd %p, sec %lx, "
-			 "(%u/%li) buffer:%p [%s]\n",
-			 req, req->cmd, (unsigned long)req->sector,
-			 req->current_nr_sectors,
-			 req->nr_sectors, req->buffer,
-			 rq_data_dir(req) ? "write" : "read");
+		blk_start_request(req);
 
+		if (!blk_fs_request(req)) {
+			__blk_end_request_all(req, -EIO);
+			continue;
+		}
+
+		pr_debug("do_blk_req %p: cmd %p, sec %lx, "
+			 "(%u/%u) buffer:%p [%s]\n",
+			 req, req->cmd, (unsigned long)blk_rq_pos(req),
+			 blk_rq_cur_sectors(req), blk_rq_sectors(req),
+			 req->buffer, rq_data_dir(req) ? "write" : "read");
 
-		blkdev_dequeue_request(req);
 		if (blkif_queue_request(req)) {
 			blk_requeue_request(rq, req);
 wait:
@@ -344,7 +344,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
 	queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq);
 
 	/* Hard sector size and max sectors impersonate the equiv. hardware. */
-	blk_queue_hardsect_size(rq, sector_size);
+	blk_queue_logical_block_size(rq, sector_size);
 	blk_queue_max_sectors(rq, 512);
 
 	/* Each segment in a request is up to an aligned page in size. */
@@ -551,7 +551,6 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 
 	for (i = info->ring.rsp_cons; i != rp; i++) {
 		unsigned long id;
-		int ret;
 
 		bret = RING_GET_RESPONSE(&info->ring, i);
 		id   = bret->id;
@@ -578,8 +577,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 				dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
 					"request: %x\n", bret->status);
 
-			ret = __blk_end_request(req, error, blk_rq_bytes(req));
-			BUG_ON(ret);
+			__blk_end_request_all(req, error);
 			break;
 		default:
 			BUG();
@@ -934,8 +932,6 @@ static void blkfront_closing(struct xenbus_device *dev)
 
 	spin_lock_irqsave(&blkif_io_lock, flags);
 
-	del_gendisk(info->gd);
-
 	/* No more blkif_request(). */
 	blk_stop_queue(info->rq);
 
@@ -949,6 +945,8 @@ static void blkfront_closing(struct xenbus_device *dev)
 	blk_cleanup_queue(info->rq);
 	info->rq = NULL;
 
+	del_gendisk(info->gd);
+
  out:
 	xenbus_frontend_closed(dev);
 }
@@ -977,8 +975,10 @@ static void backend_changed(struct xenbus_device *dev,
 		break;
 
 	case XenbusStateClosing:
-		if (info->gd == NULL)
-			xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
+		if (info->gd == NULL) {
+			xenbus_frontend_closed(dev);
+			break;
+		}
 		bd = bdget_disk(info->gd, 0);
 		if (bd == NULL)
 			xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 4aecf5dc6a9..f08491a3a81 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -463,10 +463,11 @@ struct request *ace_get_next_request(struct request_queue * q)
 {
 	struct request *req;
 
-	while ((req = elv_next_request(q)) != NULL) {
+	while ((req = blk_peek_request(q)) != NULL) {
 		if (blk_fs_request(req))
 			break;
-		end_request(req, 0);
+		blk_start_request(req);
+		__blk_end_request_all(req, -EIO);
 	}
 	return req;
 }
@@ -492,9 +493,13 @@ static void ace_fsm_dostate(struct ace_device *ace)
 		set_capacity(ace->gd, 0);
 		dev_info(ace->dev, "No CF in slot\n");
 
-		/* Drop all pending requests */
-		while ((req = elv_next_request(ace->queue)) != NULL)
-			end_request(req, 0);
+		/* Drop all in-flight and pending requests */
+		if (ace->req) {
+			__blk_end_request_all(ace->req, -EIO);
+			ace->req = NULL;
+		}
+		while ((req = blk_fetch_request(ace->queue)) != NULL)
+			__blk_end_request_all(req, -EIO);
 
 		/* Drop back to IDLE state and notify waiters */
 		ace->fsm_state = ACE_FSM_STATE_IDLE;
@@ -642,19 +647,21 @@ static void ace_fsm_dostate(struct ace_device *ace)
 			ace->fsm_state = ACE_FSM_STATE_IDLE;
 			break;
 		}
+		blk_start_request(req);
 
 		/* Okay, it's a data request, set it up for transfer */
 		dev_dbg(ace->dev,
-			"request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
-			(unsigned long long) req->sector, req->hard_nr_sectors,
-			req->current_nr_sectors, rq_data_dir(req));
+			"request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
+			(unsigned long long)blk_rq_pos(req),
+			blk_rq_sectors(req), blk_rq_cur_sectors(req),
+			rq_data_dir(req));
 
 		ace->req = req;
 		ace->data_ptr = req->buffer;
-		ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
-		ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);
+		ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR;
+		ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF);
 
-		count = req->hard_nr_sectors;
+		count = blk_rq_sectors(req);
 		if (rq_data_dir(req)) {
 			/* Kick off write request */
 			dev_dbg(ace->dev, "write data\n");
@@ -688,7 +695,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
 			dev_dbg(ace->dev,
 				"CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
 				ace->fsm_task, ace->fsm_iter_num,
-				ace->req->current_nr_sectors * 16,
+				blk_rq_cur_sectors(ace->req) * 16,
 				ace->data_count, ace->in_irq);
 			ace_fsm_yield(ace);	/* need to poll CFBSY bit */
 			break;
@@ -697,7 +704,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
 			dev_dbg(ace->dev,
 				"DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
 				ace->fsm_task, ace->fsm_iter_num,
-				ace->req->current_nr_sectors * 16,
+				blk_rq_cur_sectors(ace->req) * 16,
 				ace->data_count, ace->in_irq);
 			ace_fsm_yieldirq(ace);
 			break;
@@ -717,14 +724,13 @@ static void ace_fsm_dostate(struct ace_device *ace)
 		}
 
 		/* bio finished; is there another one? */
-		if (__blk_end_request(ace->req, 0,
-					blk_rq_cur_bytes(ace->req))) {
-			/* dev_dbg(ace->dev, "next block; h=%li c=%i\n",
-			 *      ace->req->hard_nr_sectors,
-			 *      ace->req->current_nr_sectors);
+		if (__blk_end_request_cur(ace->req, 0)) {
+			/* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
+			 *      blk_rq_sectors(ace->req),
+			 *      blk_rq_cur_sectors(ace->req));
 			 */
 			ace->data_ptr = ace->req->buffer;
-			ace->data_count = ace->req->current_nr_sectors * 16;
+			ace->data_count = blk_rq_cur_sectors(ace->req) * 16;
 			ace_fsm_yieldirq(ace);
 			break;
 		}
@@ -978,7 +984,7 @@ static int __devinit ace_setup(struct ace_device *ace)
 	ace->queue = blk_init_queue(ace_request, &ace->lock);
 	if (ace->queue == NULL)
 		goto err_blk_initq;
-	blk_queue_hardsect_size(ace->queue, 512);
+	blk_queue_logical_block_size(ace->queue, 512);
 
 	/*
 	 * Allocate and initialize GD structure
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 80754cdd311..4575171e5be 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -70,15 +70,18 @@ static struct gendisk *z2ram_gendisk;
 static void do_z2_request(struct request_queue *q)
 {
 	struct request *req;
-	while ((req = elv_next_request(q)) != NULL) {
-		unsigned long start = req->sector << 9;
-		unsigned long len  = req->current_nr_sectors << 9;
+
+	req = blk_fetch_request(q);
+	while (req) {
+		unsigned long start = blk_rq_pos(req) << 9;
+		unsigned long len  = blk_rq_cur_bytes(req);
+		int err = 0;
 
 		if (start + len > z2ram_size) {
 			printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n",
-				req->sector, req->current_nr_sectors);
-			end_request(req, 0);
-			continue;
+				blk_rq_pos(req), blk_rq_cur_sectors(req));
+			err = -EIO;
+			goto done;
 		}
 		while (len) {
 			unsigned long addr = start & Z2RAM_CHUNKMASK;
@@ -93,7 +96,9 @@ static void do_z2_request(struct request_queue *q)
 			start += size;
 			len -= size;
 		}
-		end_request(req, 1);
+	done:
+		if (!__blk_end_request_cur(req, err))
+			req = blk_fetch_request(q);
 	}
 }
 
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index af761dc434f..4895f0e0532 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -277,8 +277,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	/* FIXME: why is this needed. Note don't use ldisc_ref here as the
 	   open path is before the ldisc is referencable */
 
-	if (tty->ldisc.ops->flush_buffer)
-		tty->ldisc.ops->flush_buffer(tty);
+	if (tty->ldisc->ops->flush_buffer)
+		tty->ldisc->ops->flush_buffer(tty);
 	tty_driver_flush_buffer(tty);
 
 	return 0;
@@ -463,7 +463,6 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
 				clear_bit(HCI_UART_PROTO_SET, &hu->flags);
 				return err;
 			}
-			tty->low_latency = 1;
 		} else
 			return -EBUSY;
 		break;
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index cceace61ef2..71d1b9bab70 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2101,8 +2101,8 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 		nr = nframes;
 		if (cdi->cdda_method == CDDA_BPC_SINGLE)
 			nr = 1;
-		if (nr * CD_FRAMESIZE_RAW > (q->max_sectors << 9))
-			nr = (q->max_sectors << 9) / CD_FRAMESIZE_RAW;
+		if (nr * CD_FRAMESIZE_RAW > (queue_max_sectors(q) << 9))
+			nr = (queue_max_sectors(q) << 9) / CD_FRAMESIZE_RAW;
 
 		len = nr * CD_FRAMESIZE_RAW;
 
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 2eecb779437..b5621f27c4b 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -584,8 +584,8 @@ static void gdrom_readdisk_dma(struct work_struct *work)
 	list_for_each_safe(elem, next, &gdrom_deferred) {
 		req = list_entry(elem, struct request, queuelist);
 		spin_unlock(&gdrom_lock);
-		block = req->sector/GD_TO_BLK + GD_SESSION_OFFSET;
-		block_cnt = req->nr_sectors/GD_TO_BLK;
+		block = blk_rq_pos(req)/GD_TO_BLK + GD_SESSION_OFFSET;
+		block_cnt = blk_rq_sectors(req)/GD_TO_BLK;
 		ctrl_outl(PHYSADDR(req->buffer), GDROM_DMA_STARTADDR_REG);
 		ctrl_outl(block_cnt * GDROM_HARD_SECTOR, GDROM_DMA_LENGTH_REG);
 		ctrl_outl(1, GDROM_DMA_DIRECTION_REG);
@@ -632,39 +632,35 @@ static void gdrom_readdisk_dma(struct work_struct *work)
 		* before handling ending the request */
 		spin_lock(&gdrom_lock);
 		list_del_init(&req->queuelist);
-		__blk_end_request(req, err, blk_rq_bytes(req));
+		__blk_end_request_all(req, err);
 	}
 	spin_unlock(&gdrom_lock);
 	kfree(read_command);
 }
 
-static void gdrom_request_handler_dma(struct request *req)
-{
-	/* dequeue, add to list of deferred work
-	* and then schedule workqueue */
-	blkdev_dequeue_request(req);
-	list_add_tail(&req->queuelist, &gdrom_deferred);
-	schedule_work(&work);
-}
-
 static void gdrom_request(struct request_queue *rq)
 {
 	struct request *req;
 
-	while ((req = elv_next_request(rq)) != NULL) {
+	while ((req = blk_fetch_request(rq)) != NULL) {
 		if (!blk_fs_request(req)) {
 			printk(KERN_DEBUG "GDROM: Non-fs request ignored\n");
-			end_request(req, 0);
+			__blk_end_request_all(req, -EIO);
+			continue;
 		}
 		if (rq_data_dir(req) != READ) {
 			printk(KERN_NOTICE "GDROM: Read only device -");
 			printk(" write request ignored\n");
-			end_request(req, 0);
+			__blk_end_request_all(req, -EIO);
+			continue;
 		}
-		if (req->nr_sectors)
-			gdrom_request_handler_dma(req);
-		else
-			end_request(req, 0);
+
+		/*
+		 * Add to list of deferred work and then schedule
+		 * workqueue.
+		 */
+		list_add_tail(&req->queuelist, &gdrom_deferred);
+		schedule_work(&work);
 	}
 }
 
@@ -743,7 +739,7 @@ static void __devinit probe_gdrom_setupdisk(void)
 
 static int __devinit probe_gdrom_setupqueue(void)
 {
-	blk_queue_hardsect_size(gd.gdrom_rq, GDROM_HARD_SECTOR);
+	blk_queue_logical_block_size(gd.gdrom_rq, GDROM_HARD_SECTOR);
 	/* using DMA so memory will need to be contiguous */
 	blk_queue_max_hw_segments(gd.gdrom_rq, 1);
 	/* set a large max size to get most from DMA */
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 13929356135..0fff646cc2f 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -282,7 +282,7 @@ static int send_request(struct request *req)
 			viopath_targetinst(viopath_hostLp),
 			(u64)req, VIOVERSION << 16,
 			((u64)DEVICE_NR(diskinfo) << 48) | dmaaddr,
-			(u64)req->sector * 512, len, 0);
+			(u64)blk_rq_pos(req) * 512, len, 0);
 	if (hvrc != HvLpEvent_Rc_Good) {
 		printk(VIOCD_KERN_WARNING "hv error on op %d\n", (int)hvrc);
 		return -1;
@@ -291,36 +291,19 @@ static int send_request(struct request *req)
 	return 0;
 }
 
-static void viocd_end_request(struct request *req, int error)
-{
-	int nsectors = req->hard_nr_sectors;
-
-	/*
-	 * Make sure it's fully ended, and ensure that we process
-	 * at least one sector.
-	 */
-	if (blk_pc_request(req))
-		nsectors = (req->data_len + 511) >> 9;
-	if (!nsectors)
-		nsectors = 1;
-
-	if (__blk_end_request(req, error, nsectors << 9))
-		BUG();
-}
-
 static int rwreq;
 
 static void do_viocd_request(struct request_queue *q)
 {
 	struct request *req;
 
-	while ((rwreq == 0) && ((req = elv_next_request(q)) != NULL)) {
+	while ((rwreq == 0) && ((req = blk_fetch_request(q)) != NULL)) {
 		if (!blk_fs_request(req))
-			viocd_end_request(req, -EIO);
+			__blk_end_request_all(req, -EIO);
 		else if (send_request(req) < 0) {
 			printk(VIOCD_KERN_WARNING
 					"unable to send message to OS/400!");
-			viocd_end_request(req, -EIO);
+			__blk_end_request_all(req, -EIO);
 		} else
 			rwreq++;
 	}
@@ -486,8 +469,8 @@ static void vio_handle_cd_event(struct HvLpEvent *event)
 	case viocdopen:
 		if (event->xRc == 0) {
 			di = &viocd_diskinfo[bevent->disk];
-			blk_queue_hardsect_size(di->viocd_disk->queue,
-					bevent->block_size);
+			blk_queue_logical_block_size(di->viocd_disk->queue,
+						     bevent->block_size);
 			set_capacity(di->viocd_disk,
 					bevent->media_size *
 					bevent->block_size / 512);
@@ -531,9 +514,9 @@ return_complete:
 					"with rc %d:0x%04X: %s\n",
 					req, event->xRc,
 					bevent->sub_result, err->msg);
-			viocd_end_request(req, -EIO);
+			__blk_end_request_all(req, -EIO);
 		} else
-			viocd_end_request(req, 0);
+			__blk_end_request_all(req, 0);
 
 		/* restart handling of incoming requests */
 		spin_unlock_irqrestore(&viocd_reqlock, flags);
@@ -587,7 +570,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	struct device_node *node = vdev->dev.archdata.of_node;
 
 	deviceno = vdev->unit_address;
-	if (deviceno > VIOCD_MAX_CD)
+	if (deviceno >= VIOCD_MAX_CD)
 		return -ENODEV;
 	if (!node)
 		return -ENODEV;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 735bbe2be51..30bae6de6a0 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -97,6 +97,19 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
+config BFIN_JTAG_COMM
+	tristate "Blackfin JTAG Communication"
+	depends on BLACKFIN
+	help
+	  Add support for emulating a TTY device over the Blackfin JTAG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+	bool "Console on Blackfin JTAG"
+	depends on BFIN_JTAG_COMM=y
+
 config SERIAL_NONSTANDARD
 	bool "Non-standard serial port support"
 	depends on HAS_IOMEM
@@ -679,7 +692,7 @@ config HVCS
 	  this driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called hvcs.ko.  Additionally, this module
+	  module will be called hvcs.  Additionally, this module
 	  will depend on arch specific APIs exported from hvcserver.ko
 	  which will also be compiled when this driver is built as a
 	  module.
@@ -893,7 +906,7 @@ config DTLK
 
 config XILINX_HWICAP
 	tristate "Xilinx HWICAP Support"
-	depends on XILINX_VIRTEX
+	depends on XILINX_VIRTEX || MICROBLAZE
 	help
 	  This option enables support for Xilinx Internal Configuration
 	  Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 9caf5b5ad1c..189efcff08c 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-y				+= misc.o
 obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
 obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
 obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 3686912427b..7a748fa0dfc 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -46,6 +46,10 @@
 #define PCI_DEVICE_ID_INTEL_G45_IG          0x2E22
 #define PCI_DEVICE_ID_INTEL_G41_HB          0x2E30
 #define PCI_DEVICE_ID_INTEL_G41_IG          0x2E32
+#define PCI_DEVICE_ID_INTEL_IGDNG_D_HB	    0x0040
+#define PCI_DEVICE_ID_INTEL_IGDNG_D_IG	    0x0042
+#define PCI_DEVICE_ID_INTEL_IGDNG_M_HB	    0x0044
+#define PCI_DEVICE_ID_INTEL_IGDNG_M_IG	    0x0046
 
 /* cover 915 and 945 variants */
 #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \
@@ -75,7 +79,9 @@
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
-		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB)
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB)
 
 extern int agp_memory_reserved;
 
@@ -1211,6 +1217,8 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 	case PCI_DEVICE_ID_INTEL_Q45_HB:
 	case PCI_DEVICE_ID_INTEL_G45_HB:
 	case PCI_DEVICE_ID_INTEL_G41_HB:
+	case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
+	case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
 		*gtt_offset = *gtt_size = MB(2);
 		break;
 	default:
@@ -2186,6 +2194,10 @@ static const struct intel_driver_description {
 	    "G45/G43", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0,
 	    "G41", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_IGDNG_D_HB, PCI_DEVICE_ID_INTEL_IGDNG_D_IG, 0,
+	    "IGDNG/D", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
+	    "IGDNG/M", NULL, &intel_i965_driver },
 	{ 0, 0, 0, NULL, NULL, NULL }
 };
 
@@ -2387,6 +2399,8 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_Q45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G41_HB),
+	ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
+	ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
 	{ }
 };
 
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index fd3ebd1be57..72429b6b2fa 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -779,7 +779,7 @@ static void change_speed(struct async_struct *info,
 		info->IER |= UART_IER_MSI;
 	}
 	/* TBD:
-	 * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+	 * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
 	 */
 
 	/*
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c
new file mode 100644
index 00000000000..44c113d5604
--- /dev/null
+++ b/drivers/char/bfin_jtag_comm.c
@@ -0,0 +1,365 @@
+/*
+ * TTY over Blackfin JTAG Communication
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/circ_buf.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <asm/atomic.h>
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF   0x00000001	/* EMUDAT_OUT full & valid */
+#define EMUDIF   0x00000002	/* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004	/* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008	/* EMUDAT_IN overflow */
+
+#define DRV_NAME "bfin-jtag-comm"
+#define DEV_NAME "ttyBFJC"
+
+#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args)
+
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+	uint32_t emudat;
+	__asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d)
+{
+	return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24));
+}
+
+#define CIRC_SIZE 2048	/* see comment in tty_io.c:do_tty_write() */
+#define CIRC_MASK (CIRC_SIZE - 1)
+#define circ_empty(circ)     ((circ)->head == (circ)->tail)
+#define circ_free(circ)      CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_cnt(circ)       CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK])
+
+static struct tty_driver *bfin_jc_driver;
+static struct task_struct *bfin_jc_kthread;
+static struct tty_struct * volatile bfin_jc_tty;
+static unsigned long bfin_jc_count;
+static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static volatile struct circ_buf bfin_jc_write_buf;
+
+static int
+bfin_jc_emudat_manager(void *arg)
+{
+	uint32_t inbound_len = 0, outbound_len = 0;
+
+	while (!kthread_should_stop()) {
+		/* no one left to give data to, so sleep */
+		if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+			debug("waiting for readers\n");
+			__set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule();
+			__set_current_state(TASK_RUNNING);
+		}
+
+		/* no data available, so just chill */
+		if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
+			debug("waiting for data (in_len = %i) (circ: %i %i)\n",
+				inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+			if (inbound_len)
+				schedule();
+			else
+				schedule_timeout_interruptible(HZ);
+			continue;
+		}
+
+		/* if incoming data is ready, eat it */
+		if (bfin_read_DBGSTAT() & EMUDIF) {
+			struct tty_struct *tty;
+			mutex_lock(&bfin_jc_tty_mutex);
+			tty = (struct tty_struct *)bfin_jc_tty;
+			if (tty != NULL) {
+				uint32_t emudat = bfin_read_emudat();
+				if (inbound_len == 0) {
+					debug("incoming length: 0x%08x\n", emudat);
+					inbound_len = emudat;
+				} else {
+					size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
+					debug("  incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+					inbound_len -= num_chars;
+					tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars);
+					tty_flip_buffer_push(tty);
+				}
+			}
+			mutex_unlock(&bfin_jc_tty_mutex);
+		}
+
+		/* if outgoing data is ready, post it */
+		if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) {
+			if (outbound_len == 0) {
+				outbound_len = circ_cnt(&bfin_jc_write_buf);
+				bfin_write_emudat(outbound_len);
+				debug("outgoing length: 0x%08x\n", outbound_len);
+			} else {
+				struct tty_struct *tty;
+				int tail = bfin_jc_write_buf.tail;
+				size_t ate = (4 <= outbound_len ? 4 : outbound_len);
+				uint32_t emudat =
+				bfin_write_emudat_chars(
+					circ_byte(&bfin_jc_write_buf, tail + 0),
+					circ_byte(&bfin_jc_write_buf, tail + 1),
+					circ_byte(&bfin_jc_write_buf, tail + 2),
+					circ_byte(&bfin_jc_write_buf, tail + 3)
+				);
+				bfin_jc_write_buf.tail += ate;
+				outbound_len -= ate;
+				mutex_lock(&bfin_jc_tty_mutex);
+				tty = (struct tty_struct *)bfin_jc_tty;
+				if (tty)
+					tty_wakeup(tty);
+				mutex_unlock(&bfin_jc_tty_mutex);
+				debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
+			}
+		}
+	}
+
+	__set_current_state(TASK_RUNNING);
+	return 0;
+}
+
+static int
+bfin_jc_open(struct tty_struct *tty, struct file *filp)
+{
+	mutex_lock(&bfin_jc_tty_mutex);
+	debug("open %lu\n", bfin_jc_count);
+	++bfin_jc_count;
+	bfin_jc_tty = tty;
+	wake_up_process(bfin_jc_kthread);
+	mutex_unlock(&bfin_jc_tty_mutex);
+	return 0;
+}
+
+static void
+bfin_jc_close(struct tty_struct *tty, struct file *filp)
+{
+	mutex_lock(&bfin_jc_tty_mutex);
+	debug("close %lu\n", bfin_jc_count);
+	if (--bfin_jc_count == 0)
+		bfin_jc_tty = NULL;
+	wake_up_process(bfin_jc_kthread);
+	mutex_unlock(&bfin_jc_tty_mutex);
+}
+
+/* XXX: we dont handle the put_char() case where we must handle count = 1 */
+static int
+bfin_jc_circ_write(const unsigned char *buf, int count)
+{
+	int i;
+	count = min(count, circ_free(&bfin_jc_write_buf));
+	debug("going to write chunk of %i bytes\n", count);
+	for (i = 0; i < count; ++i)
+		circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i];
+	bfin_jc_write_buf.head += i;
+	return i;
+}
+
+#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE
+# define acquire_console_sem()
+# define release_console_sem()
+#endif
+static int
+bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	int i;
+	acquire_console_sem();
+	i = bfin_jc_circ_write(buf, count);
+	release_console_sem();
+	wake_up_process(bfin_jc_kthread);
+	return i;
+}
+
+static void
+bfin_jc_flush_chars(struct tty_struct *tty)
+{
+	wake_up_process(bfin_jc_kthread);
+}
+
+static int
+bfin_jc_write_room(struct tty_struct *tty)
+{
+	return circ_free(&bfin_jc_write_buf);
+}
+
+static int
+bfin_jc_chars_in_buffer(struct tty_struct *tty)
+{
+	return circ_cnt(&bfin_jc_write_buf);
+}
+
+static void
+bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	unsigned long expire = jiffies + timeout;
+	while (!circ_empty(&bfin_jc_write_buf)) {
+		if (signal_pending(current))
+			break;
+		if (time_after(jiffies, expire))
+			break;
+	}
+}
+
+static struct tty_operations bfin_jc_ops = {
+	.open            = bfin_jc_open,
+	.close           = bfin_jc_close,
+	.write           = bfin_jc_write,
+	/*.put_char        = bfin_jc_put_char,*/
+	.flush_chars     = bfin_jc_flush_chars,
+	.write_room      = bfin_jc_write_room,
+	.chars_in_buffer = bfin_jc_chars_in_buffer,
+	.wait_until_sent = bfin_jc_wait_until_sent,
+};
+
+static int __init bfin_jc_init(void)
+{
+	int ret;
+
+	bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
+	if (IS_ERR(bfin_jc_kthread))
+		return PTR_ERR(bfin_jc_kthread);
+
+	ret = -ENOMEM;
+
+	bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0;
+	bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL);
+	if (!bfin_jc_write_buf.buf)
+		goto err;
+
+	bfin_jc_driver = alloc_tty_driver(1);
+	if (!bfin_jc_driver)
+		goto err;
+
+	bfin_jc_driver->owner        = THIS_MODULE;
+	bfin_jc_driver->driver_name  = DRV_NAME;
+	bfin_jc_driver->name         = DEV_NAME;
+	bfin_jc_driver->type         = TTY_DRIVER_TYPE_SERIAL;
+	bfin_jc_driver->subtype      = SERIAL_TYPE_NORMAL;
+	bfin_jc_driver->init_termios = tty_std_termios;
+	tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+
+	ret = tty_register_driver(bfin_jc_driver);
+	if (ret)
+		goto err;
+
+	pr_init(KERN_INFO DRV_NAME ": initialized\n");
+
+	return 0;
+
+ err:
+	put_tty_driver(bfin_jc_driver);
+	kfree(bfin_jc_write_buf.buf);
+	kthread_stop(bfin_jc_kthread);
+	return ret;
+}
+module_init(bfin_jc_init);
+
+static void __exit bfin_jc_exit(void)
+{
+	kthread_stop(bfin_jc_kthread);
+	kfree(bfin_jc_write_buf.buf);
+	tty_unregister_driver(bfin_jc_driver);
+	put_tty_driver(bfin_jc_driver);
+}
+module_exit(bfin_jc_exit);
+
+#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static void
+bfin_jc_straight_buffer_write(const char *buf, unsigned count)
+{
+	unsigned ate = 0;
+	while (bfin_read_DBGSTAT() & EMUDOF)
+		continue;
+	bfin_write_emudat(count);
+	while (ate < count) {
+		while (bfin_read_DBGSTAT() & EMUDOF)
+			continue;
+		bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]);
+		ate += 4;
+	}
+}
+#endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE
+static void
+bfin_jc_console_write(struct console *co, const char *buf, unsigned count)
+{
+	if (bfin_jc_kthread == NULL)
+		bfin_jc_straight_buffer_write(buf, count);
+	else
+		bfin_jc_circ_write(buf, count);
+}
+
+static struct tty_driver *
+bfin_jc_console_device(struct console *co, int *index)
+{
+	*index = co->index;
+	return bfin_jc_driver;
+}
+
+static struct console bfin_jc_console = {
+	.name    = DEV_NAME,
+	.write   = bfin_jc_console_write,
+	.device  = bfin_jc_console_device,
+	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
+	.index   = -1,
+};
+
+static int __init bfin_jc_console_init(void)
+{
+	register_console(&bfin_jc_console);
+	return 0;
+}
+console_initcall(bfin_jc_console_init);
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init
+bfin_jc_early_write(struct console *co, const char *buf, unsigned int count)
+{
+	bfin_jc_straight_buffer_write(buf, count);
+}
+
+static struct __initdata console bfin_jc_early_console = {
+	.name   = "early_BFJC",
+	.write   = bfin_jc_early_write,
+	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
+	.index   = -1,
+};
+
+struct console * __init
+bfin_jc_early_init(unsigned int port, unsigned int cflag)
+{
+	return &bfin_jc_early_console;
+}
+#endif
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 1fdb9f657d8..f3366d3f06c 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -604,7 +604,6 @@
 
 #define NR_PORTS	256
 
-#define ZE_V1_NPORTS	64
 #define ZO_V1	0
 #define ZO_V2	1
 #define ZE_V1	2
@@ -663,18 +662,6 @@
 static void cy_throttle(struct tty_struct *tty);
 static void cy_send_xchar(struct tty_struct *tty, char ch);
 
-#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1)
-
-#define Z_FPGA_CHECK(card) \
-	((readl(&((struct RUNTIME_9060 __iomem *) \
-		((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
-
-#define ISZLOADED(card)	(((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \
-			((card).ctl_addr))->mail_box_0)) || \
-			Z_FPGA_CHECK(card)) && \
-			(ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \
-			((card).base_addr+ID_ADDRESS))->signature)))
-
 #ifndef SERIAL_XMIT_SIZE
 #define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
 #endif
@@ -687,8 +674,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch);
 #define DRIVER_VERSION	0x02010203
 #define RAM_SIZE 0x80000
 
-#define Z_FPGA_LOADED(X)	((readl(&(X)->init_ctrl) & (1<<17)) != 0)
-
 enum zblock_type {
 	ZBLOCK_PRG = 0,
 	ZBLOCK_FPGA = 1
@@ -883,6 +868,29 @@ static void cyz_rx_restart(unsigned long);
 static struct timer_list cyz_rx_full_timer[NR_PORTS];
 #endif				/* CONFIG_CYZ_INTR */
 
+static inline bool cy_is_Z(struct cyclades_card *card)
+{
+	return card->num_chips == (unsigned int)-1;
+}
+
+static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr)
+{
+	return readl(&ctl_addr->init_ctrl) & (1 << 17);
+}
+
+static inline bool cyz_fpga_loaded(struct cyclades_card *card)
+{
+	return __cyz_fpga_loaded(card->ctl_addr.p9060);
+}
+
+static inline bool cyz_is_loaded(struct cyclades_card *card)
+{
+	struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS;
+
+	return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) &&
+			readl(&fw_id->signature) == ZFIRM_ID;
+}
+
 static inline int serial_paranoia_check(struct cyclades_port *info,
 		char *name, const char *routine)
 {
@@ -1395,19 +1403,15 @@ cyz_fetch_msg(struct cyclades_card *cinfo,
 	unsigned long loc_doorbell;
 
 	firm_id = cinfo->base_addr + ID_ADDRESS;
-	if (!ISZLOADED(*cinfo))
-		return -1;
 	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 	board_ctrl = &zfw_ctrl->board_ctrl;
 
-	loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *)
-				  (cinfo->ctl_addr))->loc_doorbell);
+	loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
 	if (loc_doorbell) {
 		*cmd = (char)(0xff & loc_doorbell);
 		*channel = readl(&board_ctrl->fwcmd_channel);
 		*param = (__u32) readl(&board_ctrl->fwcmd_param);
-		cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
-			  loc_doorbell, 0xffffffff);
+		cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
 		return 1;
 	}
 	return 0;
@@ -1424,15 +1428,14 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
 	unsigned int index;
 
 	firm_id = cinfo->base_addr + ID_ADDRESS;
-	if (!ISZLOADED(*cinfo))
+	if (!cyz_is_loaded(cinfo))
 		return -1;
 
 	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 	board_ctrl = &zfw_ctrl->board_ctrl;
 
 	index = 0;
-	pci_doorbell =
-	    &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
+	pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
 	while ((readl(pci_doorbell) & 0xff) != 0) {
 		if (index++ == 1000)
 			return (int)(readl(pci_doorbell) & 0xff);
@@ -1624,10 +1627,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 	static struct BOARD_CTRL __iomem *board_ctrl;
 	static struct CH_CTRL __iomem *ch_ctrl;
 	static struct BUF_CTRL __iomem *buf_ctrl;
-	__u32 channel;
+	__u32 channel, param, fw_ver;
 	__u8 cmd;
-	__u32 param;
-	__u32 hw_ver, fw_ver;
 	int special_count;
 	int delta_count;
 
@@ -1635,8 +1636,6 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 	board_ctrl = &zfw_ctrl->board_ctrl;
 	fw_ver = readl(&board_ctrl->fw_version);
-	hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
-			mail_box_0);
 
 	while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
 		special_count = 0;
@@ -1737,15 +1736,7 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id)
 {
 	struct cyclades_card *cinfo = dev_id;
 
-	if (unlikely(cinfo == NULL)) {
-#ifdef CY_DEBUG_INTERRUPTS
-		printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",
-									irq);
-#endif
-		return IRQ_NONE;	/* spurious interrupt */
-	}
-
-	if (unlikely(!ISZLOADED(*cinfo))) {
+	if (unlikely(!cyz_is_loaded(cinfo))) {
 #ifdef CY_DEBUG_INTERRUPTS
 		printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
 				"(IRQ%d).\n", irq);
@@ -1785,7 +1776,6 @@ static void cyz_poll(unsigned long arg)
 	struct tty_struct *tty;
 	struct FIRM_ID __iomem *firm_id;
 	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
 	struct BUF_CTRL __iomem *buf_ctrl;
 	unsigned long expires = jiffies + HZ;
 	unsigned int port, card;
@@ -1793,19 +1783,17 @@ static void cyz_poll(unsigned long arg)
 	for (card = 0; card < NR_CARDS; card++) {
 		cinfo = &cy_card[card];
 
-		if (!IS_CYC_Z(*cinfo))
+		if (!cy_is_Z(cinfo))
 			continue;
-		if (!ISZLOADED(*cinfo))
+		if (!cyz_is_loaded(cinfo))
 			continue;
 
 		firm_id = cinfo->base_addr + ID_ADDRESS;
 		zfw_ctrl = cinfo->base_addr +
 				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &(zfw_ctrl->board_ctrl);
 
 	/* Skip first polling cycle to avoid racing conditions with the FW */
 		if (!cinfo->intr_enabled) {
-			cinfo->nports = (int)readl(&board_ctrl->n_channel);
 			cinfo->intr_enabled = 1;
 			continue;
 		}
@@ -1874,7 +1862,7 @@ static int startup(struct cyclades_port *info)
 
 	set_line_char(info);
 
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -1931,7 +1919,7 @@ static int startup(struct cyclades_port *info)
 		base_addr = card->base_addr;
 
 		firm_id = base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*card))
+		if (!cyz_is_loaded(card))
 			return -ENODEV;
 
 		zfw_ctrl = card->base_addr +
@@ -2026,7 +2014,7 @@ static void start_xmit(struct cyclades_port *info)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -2070,7 +2058,7 @@ static void shutdown(struct cyclades_port *info)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -2126,7 +2114,7 @@ static void shutdown(struct cyclades_port *info)
 #endif
 
 		firm_id = base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*card))
+		if (!cyz_is_loaded(card))
 			return;
 
 		zfw_ctrl = card->base_addr +
@@ -2233,7 +2221,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 #endif
 	info->port.blocked_open++;
 
-	if (!IS_CYC_Z(*cinfo)) {
+	if (!cy_is_Z(cinfo)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = cinfo->bus_index;
@@ -2296,7 +2284,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 
 		base_addr = cinfo->base_addr;
 		firm_id = base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*cinfo)) {
+		if (!cyz_is_loaded(cinfo)) {
 			__set_current_state(TASK_RUNNING);
 			remove_wait_queue(&info->port.open_wait, &wait);
 			return -EINVAL;
@@ -2397,16 +2385,14 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	   treat it as absent from the system.  This
 	   will make the user pay attention.
 	 */
-	if (IS_CYC_Z(*info->card)) {
+	if (cy_is_Z(info->card)) {
 		struct cyclades_card *cinfo = info->card;
 		struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
 
-		if (!ISZLOADED(*cinfo)) {
-			if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *)
-					 (cinfo->ctl_addr))->mail_box_0)) &&
-					Z_FPGA_CHECK(*cinfo)) &&
-					(ZFIRM_HLT == readl(
-						&firm_id->signature))) {
+		if (!cyz_is_loaded(cinfo)) {
+			if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) &&
+					readl(&firm_id->signature) ==
+					ZFIRM_HLT) {
 				printk(KERN_ERR "cyc:Cyclades-Z Error: you "
 					"need an external power supply for "
 					"this number of ports.\nFirmware "
@@ -2423,18 +2409,13 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 		   interrupts should be enabled as soon as the first open
 		   happens to one of its ports. */
 			if (!cinfo->intr_enabled) {
-				struct ZFW_CTRL __iomem *zfw_ctrl;
-				struct BOARD_CTRL __iomem *board_ctrl;
-
-				zfw_ctrl = cinfo->base_addr +
-					(readl(&firm_id->zfwctrl_addr) &
-					 0xfffff);
-
-				board_ctrl = &zfw_ctrl->board_ctrl;
+				u16 intr;
 
 				/* Enable interrupts on the PLX chip */
-				cy_writew(cinfo->ctl_addr + 0x68,
-					readw(cinfo->ctl_addr + 0x68) | 0x0900);
+				intr = readw(&cinfo->ctl_addr.p9060->
+						intr_ctrl_stat) | 0x0900;
+				cy_writew(&cinfo->ctl_addr.p9060->
+						intr_ctrl_stat, intr);
 				/* Enable interrupts on the FW */
 				retval = cyz_issue_cmd(cinfo, 0,
 						C_CM_IRQ_ENBL, 0L);
@@ -2442,8 +2423,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 					printk(KERN_ERR "cyc:IRQ enable retval "
 						"was %x\n", retval);
 				}
-				cinfo->nports =
-					(int)readl(&board_ctrl->n_channel);
 				cinfo->intr_enabled = 1;
 			}
 		}
@@ -2556,7 +2535,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 #endif
 	card = info->card;
 	channel = (info->line) - (card->first_line);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -2601,7 +2580,7 @@ static void cy_flush_buffer(struct tty_struct *tty)
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	if (IS_CYC_Z(*card)) {	/* If it is a Z card, flush the on-board
+	if (cy_is_Z(card)) {	/* If it is a Z card, flush the on-board
 					   buffers as well */
 		spin_lock_irqsave(&card->card_lock, flags);
 		retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
@@ -2682,7 +2661,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		int channel = info->line - card->first_line;
 		int index = card->bus_index;
 		void __iomem *base_addr = card->base_addr +
@@ -2902,7 +2881,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 	channel = (info->line) - (card->first_line);
 
 #ifdef Z_EXT_CHARS_IN_BUFFER
-	if (!IS_CYC_Z(cy_card[card])) {
+	if (!cy_is_Z(card)) {
 #endif				/* Z_EXT_CHARS_IN_BUFFER */
 #ifdef CY_DEBUG_IO
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2984,7 +2963,6 @@ static void set_line_char(struct cyclades_port *info)
 	void __iomem *base_addr;
 	int chip, channel, index;
 	unsigned cflag, iflag;
-	unsigned short chip_number;
 	int baud, baud_rate = 0;
 	int i;
 
@@ -3013,9 +2991,8 @@ static void set_line_char(struct cyclades_port *info)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	chip_number = channel / 4;
 
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 
 		index = card->bus_index;
 
@@ -3233,21 +3210,17 @@ static void set_line_char(struct cyclades_port *info)
 	} else {
 		struct FIRM_ID __iomem *firm_id;
 		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
 		struct CH_CTRL __iomem *ch_ctrl;
-		struct BUF_CTRL __iomem *buf_ctrl;
 		__u32 sw_flow;
 		int retval;
 
 		firm_id = card->base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*card))
+		if (!cyz_is_loaded(card))
 			return;
 
 		zfw_ctrl = card->base_addr +
 			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
 		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
 
 		/* baud rate */
 		baud = tty_get_baud_rate(info->port.tty);
@@ -3457,7 +3430,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
 
 	card = info->card;
 	channel = (info->line) - (card->first_line);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3497,7 +3470,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3523,7 +3496,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 	} else {
 		base_addr = card->base_addr;
 		firm_id = card->base_addr + ID_ADDRESS;
-		if (ISZLOADED(*card)) {
+		if (cyz_is_loaded(card)) {
 			zfw_ctrl = card->base_addr +
 				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
 			board_ctrl = &zfw_ctrl->board_ctrl;
@@ -3566,7 +3539,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 
 	card = info->card;
 	channel = (info->line) - (card->first_line);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3641,7 +3614,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 		base_addr = card->base_addr;
 
 		firm_id = card->base_addr + ID_ADDRESS;
-		if (ISZLOADED(*card)) {
+		if (cyz_is_loaded(card)) {
 			zfw_ctrl = card->base_addr +
 				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
 			board_ctrl = &zfw_ctrl->board_ctrl;
@@ -3713,7 +3686,7 @@ static int cy_break(struct tty_struct *tty, int break_state)
 	card = info->card;
 
 	spin_lock_irqsave(&card->card_lock, flags);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		/* Let the transmit ISR take care of this (since it
 		   requires stuffing characters into the output stream).
 		 */
@@ -3782,7 +3755,7 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3810,7 +3783,7 @@ static int get_threshold(struct cyclades_port *info,
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3844,7 +3817,7 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3867,7 +3840,7 @@ static int get_timeout(struct cyclades_port *info,
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -4121,7 +4094,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch)
 	card = info->card;
 	channel = info->line - card->first_line;
 
-	if (IS_CYC_Z(*card)) {
+	if (cy_is_Z(card)) {
 		if (ch == STOP_CHAR(tty))
 			cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
 		else if (ch == START_CHAR(tty))
@@ -4154,7 +4127,7 @@ static void cy_throttle(struct tty_struct *tty)
 	card = info->card;
 
 	if (I_IXOFF(tty)) {
-		if (!IS_CYC_Z(*card))
+		if (!cy_is_Z(card))
 			cy_send_xchar(tty, STOP_CHAR(tty));
 		else
 			info->throttle = 1;
@@ -4162,7 +4135,7 @@ static void cy_throttle(struct tty_struct *tty)
 
 	if (tty->termios->c_cflag & CRTSCTS) {
 		channel = info->line - card->first_line;
-		if (!IS_CYC_Z(*card)) {
+		if (!cy_is_Z(card)) {
 			chip = channel >> 2;
 			channel &= 0x03;
 			index = card->bus_index;
@@ -4219,7 +4192,7 @@ static void cy_unthrottle(struct tty_struct *tty)
 	if (tty->termios->c_cflag & CRTSCTS) {
 		card = info->card;
 		channel = info->line - card->first_line;
-		if (!IS_CYC_Z(*card)) {
+		if (!cy_is_Z(card)) {
 			chip = channel >> 2;
 			channel &= 0x03;
 			index = card->bus_index;
@@ -4263,7 +4236,7 @@ static void cy_stop(struct tty_struct *tty)
 
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
-	if (!IS_CYC_Z(*cinfo)) {
+	if (!cy_is_Z(cinfo)) {
 		index = cinfo->bus_index;
 		chip = channel >> 2;
 		channel &= 0x03;
@@ -4296,7 +4269,7 @@ static void cy_start(struct tty_struct *tty)
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
 	index = cinfo->bus_index;
-	if (!IS_CYC_Z(*cinfo)) {
+	if (!cy_is_Z(cinfo)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
@@ -4347,33 +4320,20 @@ static void cy_hangup(struct tty_struct *tty)
 static int __devinit cy_init_card(struct cyclades_card *cinfo)
 {
 	struct cyclades_port *info;
-	u32 uninitialized_var(mailbox);
-	unsigned int nports, port;
+	unsigned int port;
 	unsigned short chip_number;
-	int uninitialized_var(index);
 
 	spin_lock_init(&cinfo->card_lock);
+	cinfo->intr_enabled = 0;
 
-	if (IS_CYC_Z(*cinfo)) {	/* Cyclades-Z */
-		mailbox = readl(&((struct RUNTIME_9060 __iomem *)
-				     cinfo->ctl_addr)->mail_box_0);
-		nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
-		cinfo->intr_enabled = 0;
-		cinfo->nports = 0;	/* Will be correctly set later, after
-					   Z FW is loaded */
-	} else {
-		index = cinfo->bus_index;
-		nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
-	}
-
-	cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL);
+	cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
+			GFP_KERNEL);
 	if (cinfo->ports == NULL) {
 		printk(KERN_ERR "Cyclades: cannot allocate ports\n");
-		cinfo->nports = 0;
 		return -ENOMEM;
 	}
 
-	for (port = cinfo->first_line; port < cinfo->first_line + nports;
+	for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
 			port++) {
 		info = &cinfo->ports[port - cinfo->first_line];
 		tty_port_init(&info->port);
@@ -4387,9 +4347,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		init_completion(&info->shutdown_wait);
 		init_waitqueue_head(&info->delta_msr_wait);
 
-		if (IS_CYC_Z(*cinfo)) {
+		if (cy_is_Z(cinfo)) {
 			info->type = PORT_STARTECH;
-			if (mailbox == ZO_V1)
+			if (cinfo->hw_ver == ZO_V1)
 				info->xmit_fifo_size = CYZ_FIFO_SIZE;
 			else
 				info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
@@ -4398,6 +4358,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 				cyz_rx_restart, (unsigned long)info);
 #endif
 		} else {
+			int index = cinfo->bus_index;
 			info->type = PORT_CIRRUS;
 			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
 			info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
@@ -4430,7 +4391,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 	}
 
 #ifndef CONFIG_CYZ_INTR
-	if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) {
+	if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) {
 		mod_timer(&cyz_timerlist, jiffies + 1);
 #ifdef CY_PCI_DEBUG
 		printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
@@ -4621,11 +4582,12 @@ static int __init cy_detect_isa(void)
 
 		/* set cy_card */
 		cy_card[j].base_addr = cy_isa_address;
-		cy_card[j].ctl_addr = NULL;
+		cy_card[j].ctl_addr.p9050 = NULL;
 		cy_card[j].irq = (int)cy_isa_irq;
 		cy_card[j].bus_index = 0;
 		cy_card[j].first_line = cy_next_channel;
-		cy_card[j].num_chips = cy_isa_nchan / 4;
+		cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+		cy_card[j].nports = cy_isa_nchan;
 		if (cy_init_card(&cy_card[j])) {
 			cy_card[j].base_addr = NULL;
 			free_irq(cy_isa_irq, &cy_card[j]);
@@ -4781,7 +4743,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 	struct CUSTOM_REG __iomem *cust = base_addr;
 	struct ZFW_CTRL __iomem *pt_zfwctrl;
 	void __iomem *tmp;
-	u32 mailbox, status;
+	u32 mailbox, status, nchan;
 	unsigned int i;
 	int retval;
 
@@ -4793,7 +4755,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 
 	/* Check whether the firmware is already loaded and running. If
 	   positive, skip this board */
-	if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
+	if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
 		u32 cntval = readl(base_addr + 0x190);
 
 		udelay(100);
@@ -4812,7 +4774,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 
 	mailbox = readl(&ctl_addr->mail_box_0);
 
-	if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) {
+	if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) {
 		/* stops CPU and set window to beginning of RAM */
 		cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
 		cy_writel(&cust->cpu_stop, 0);
@@ -4828,7 +4790,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 				base_addr);
 		if (retval)
 			goto err_rel;
-		if (!Z_FPGA_LOADED(ctl_addr)) {
+		if (!__cyz_fpga_loaded(ctl_addr)) {
 			dev_err(&pdev->dev, "fw upload successful, but fw is "
 					"not loaded\n");
 			goto err_rel;
@@ -4887,7 +4849,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 				"system before loading the new FW to the "
 				"Cyclades-Z.\n");
 
-			if (Z_FPGA_LOADED(ctl_addr))
+			if (__cyz_fpga_loaded(ctl_addr))
 				plx_init(pdev, irq, ctl_addr);
 
 			retval = -EIO;
@@ -4902,16 +4864,16 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 			base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
 			base_addr + readl(&fid->zfwctrl_addr));
 
+	nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
 	dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
-		readl(&pt_zfwctrl->board_ctrl.fw_version),
-		readl(&pt_zfwctrl->board_ctrl.n_channel));
+		readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
 
-	if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) {
+	if (nchan == 0) {
 		dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
 			"check the connection between the Z host card and the "
 			"serial expanders.\n");
 
-		if (Z_FPGA_LOADED(ctl_addr))
+		if (__cyz_fpga_loaded(ctl_addr))
 			plx_init(pdev, irq, ctl_addr);
 
 		dev_info(&pdev->dev, "Null number of ports detected. Board "
@@ -4932,9 +4894,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 	cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
 			0x00030800UL);
 
-	plx_init(pdev, irq, ctl_addr);
-
-	return 0;
+	return nchan;
 err_rel:
 	release_firmware(fw);
 err:
@@ -4946,7 +4906,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 {
 	void __iomem *addr0 = NULL, *addr2 = NULL;
 	char *card_name = NULL;
-	u32 mailbox;
+	u32 uninitialized_var(mailbox);
 	unsigned int device_id, nchan = 0, card_no, i;
 	unsigned char plx_ver;
 	int retval, irq;
@@ -5023,11 +4983,12 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 		}
 
 		/* Disable interrupts on the PLX before resetting it */
-		cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900);
+		cy_writew(&ctl_addr->intr_ctrl_stat,
+				readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
 
 		plx_init(pdev, irq, addr0);
 
-		mailbox = (u32)readl(&ctl_addr->mail_box_0);
+		mailbox = readl(&ctl_addr->mail_box_0);
 
 		addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
 				mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
@@ -5038,12 +4999,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 
 		if (mailbox == ZE_V1) {
 			card_name = "Cyclades-Ze";
-
-			readl(&ctl_addr->mail_box_0);
-			nchan = ZE_V1_NPORTS;
 		} else {
 			card_name = "Cyclades-8Zo";
-
 #ifdef CY_PCI_DEBUG
 			if (mailbox == ZO_V1) {
 				cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
@@ -5065,15 +5022,12 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 			 */
 			if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
 				cy_writel(addr2 + ID_ADDRESS, 0L);
-
-			retval = cyz_load_fw(pdev, addr2, addr0, irq);
-			if (retval)
-				goto err_unmap;
-			/* This must be a Cyclades-8Zo/PCI.  The extendable
-			   version will have a different device_id and will
-			   be allocated its maximum number of ports. */
-			nchan = 8;
 		}
+
+		retval = cyz_load_fw(pdev, addr2, addr0, irq);
+		if (retval <= 0)
+			goto err_unmap;
+		nchan = retval;
 	}
 
 	if ((cy_next_channel + nchan) > NR_PORTS) {
@@ -5103,8 +5057,10 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 			dev_err(&pdev->dev, "could not allocate IRQ\n");
 			goto err_unmap;
 		}
-		cy_card[card_no].num_chips = nchan / 4;
+		cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
 	} else {
+		cy_card[card_no].hw_ver = mailbox;
+		cy_card[card_no].num_chips = (unsigned int)-1;
 #ifdef CONFIG_CYZ_INTR
 		/* allocate IRQ only if board has an IRQ */
 		if (irq != 0 && irq != 255) {
@@ -5117,15 +5073,15 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 			}
 		}
 #endif				/* CONFIG_CYZ_INTR */
-		cy_card[card_no].num_chips = (unsigned int)-1;
 	}
 
 	/* set cy_card */
 	cy_card[card_no].base_addr = addr2;
-	cy_card[card_no].ctl_addr = addr0;
+	cy_card[card_no].ctl_addr.p9050 = addr0;
 	cy_card[card_no].irq = irq;
 	cy_card[card_no].bus_index = 1;
 	cy_card[card_no].first_line = cy_next_channel;
+	cy_card[card_no].nports = nchan;
 	retval = cy_init_card(&cy_card[card_no]);
 	if (retval)
 		goto err_null;
@@ -5138,17 +5094,20 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 		plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
 		switch (plx_ver) {
 		case PLX_9050:
-
 			cy_writeb(addr0 + 0x4c, 0x43);
 			break;
 
 		case PLX_9060:
 		case PLX_9080:
 		default:	/* Old boards, use PLX_9060 */
-			plx_init(pdev, irq, addr0);
-			cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900);
+		{
+			struct RUNTIME_9060 __iomem *ctl_addr = addr0;
+			plx_init(pdev, irq, ctl_addr);
+			cy_writew(&ctl_addr->intr_ctrl_stat,
+				readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
 			break;
 		}
+		}
 	}
 
 	dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
@@ -5179,22 +5138,23 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev)
 	unsigned int i;
 
 	/* non-Z with old PLX */
-	if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
+	if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
 			PLX_9050)
-		cy_writeb(cinfo->ctl_addr + 0x4c, 0);
+		cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
 	else
 #ifndef CONFIG_CYZ_INTR
-		if (!IS_CYC_Z(*cinfo))
+		if (!cy_is_Z(cinfo))
 #endif
-		cy_writew(cinfo->ctl_addr + 0x68,
-				readw(cinfo->ctl_addr + 0x68) & ~0x0900);
+		cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
+			readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
+			~0x0900);
 
 	iounmap(cinfo->base_addr);
-	if (cinfo->ctl_addr)
-		iounmap(cinfo->ctl_addr);
+	if (cinfo->ctl_addr.p9050)
+		iounmap(cinfo->ctl_addr.p9050);
 	if (cinfo->irq
 #ifndef CONFIG_CYZ_INTR
-		&& !IS_CYC_Z(*cinfo)
+		&& !cy_is_Z(cinfo)
 #endif /* CONFIG_CYZ_INTR */
 		)
 		free_irq(cinfo->irq, cinfo);
@@ -5240,7 +5200,7 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
 					(cur_jifs - info->idle_stats.recv_idle)/
 					HZ, info->idle_stats.overruns,
 					/* FIXME: double check locking */
-					(long)info->port.tty->ldisc.ops->num);
+					(long)info->port.tty->ldisc->ops->num);
 			else
 				seq_printf(m, "%3d %8lu %10lu %8lu "
 					"%10lu %8lu %9lu %6ld\n",
@@ -5386,11 +5346,11 @@ static void __exit cy_cleanup_module(void)
 			/* clear interrupt */
 			cy_writeb(card->base_addr + Cy_ClrIntr, 0);
 			iounmap(card->base_addr);
-			if (card->ctl_addr)
-				iounmap(card->ctl_addr);
+			if (card->ctl_addr.p9050)
+				iounmap(card->ctl_addr.p9050);
 			if (card->irq
 #ifndef CONFIG_CYZ_INTR
-				&& !IS_CYC_Z(*card)
+				&& !cy_is_Z(card)
 #endif /* CONFIG_CYZ_INTR */
 				)
 				free_irq(card->irq, card);
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index af7c13ca949..abef1f7d84f 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -745,7 +745,7 @@ static int epca_carrier_raised(struct tty_port *port)
 	return 0;
 }
 
-static void epca_raise_dtr_rts(struct tty_port *port)
+static void epca_dtr_rts(struct tty_port *port, int onoff)
 {
 }
 
@@ -925,7 +925,7 @@ static const struct tty_operations pc_ops = {
 
 static const struct tty_port_operations epca_port_ops = {
 	.carrier_raised = epca_carrier_raised,
-	.raise_dtr_rts = epca_raise_dtr_rts,
+	.dtr_rts = epca_dtr_rts,
 };
 
 static int info_open(struct tty_struct *tty, struct file *filp)
@@ -1518,7 +1518,7 @@ static void doevent(int crd)
 		if (event & MODEMCHG_IND) {
 			/* A modem signal change has been indicated */
 			ch->imodem = mstat;
-			if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) {
+			if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) {
 				/* We are now receiving dcd */
 				if (mstat & ch->dcd)
 					wake_up_interruptible(&ch->port.open_wait);
@@ -1765,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch)
 		 * that the driver will wait on carrier detect.
 		 */
 		if (ts->c_cflag & CLOCAL)
-			clear_bit(ASYNC_CHECK_CD, &ch->port.flags);
+			clear_bit(ASYNCB_CHECK_CD, &ch->port.flags);
 		else
-			set_bit(ASYNC_CHECK_CD, &ch->port.flags);
+			set_bit(ASYNCB_CHECK_CD, &ch->port.flags);
 		mval = ch->m_dtr | ch->m_rts;
 	} /* End CBAUD not detected */
 	iflag = termios2digi_i(ch, ts->c_iflag);
@@ -2114,8 +2114,8 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 			tty_wait_until_sent(tty, 0);
 		} else {
 			/* ldisc lock already held in ioctl */
-			if (tty->ldisc.ops->flush_buffer)
-				tty->ldisc.ops->flush_buffer(tty);
+			if (tty->ldisc->ops->flush_buffer)
+				tty->ldisc->ops->flush_buffer(tty);
 		}
 		unlock_kernel();
 		/* Fall Thru */
@@ -2244,7 +2244,8 @@ static void do_softint(struct work_struct *work)
 			if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
 				tty_hangup(tty);
 				wake_up_interruptible(&ch->port.open_wait);
-				clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags);
+				clear_bit(ASYNCB_NORMAL_ACTIVE,
+						&ch->port.flags);
 			}
 		}
 		tty_kref_put(tty);
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 340ba4f9dc5..4a9f3492b92 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -224,7 +224,7 @@ static void hpet_timer_set_irq(struct hpet_dev *devp)
 			break;
 		}
 
-		gsi = acpi_register_gsi(irq, ACPI_LEVEL_SENSITIVE,
+		gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE,
 					ACPI_ACTIVE_LOW);
 		if (gsi > 0)
 			break;
@@ -939,7 +939,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
 		irqp = &res->data.extended_irq;
 
 		for (i = 0; i < irqp->interrupt_count; i++) {
-			irq = acpi_register_gsi(irqp->interrupts[i],
+			irq = acpi_register_gsi(NULL, irqp->interrupts[i],
 				      irqp->triggering, irqp->polarity);
 			if (irq < 0)
 				return AE_ERROR;
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 5fab6470f4b..f4b3f7293fe 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -88,7 +88,7 @@ config HW_RANDOM_N2RNG
 
 config HW_RANDOM_VIA
 	tristate "VIA HW Random Number Generator support"
-	depends on HW_RANDOM && X86_32
+	depends on HW_RANDOM && X86
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
@@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called virtio-rng.  If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+	tristate "Freescale i.MX RNGA Random Number Generator"
+	depends on HW_RANDOM && ARCH_HAS_RNGA
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Freescale i.MX processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mxc-rnga.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a5f28..fd1ecd2f673 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 00000000000..187c6be80f4
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL			0x00
+#define RNGA_STATUS			0x04
+#define RNGA_ENTROPY			0x08
+#define RNGA_OUTPUT_FIFO		0x0c
+#define RNGA_MODE			0x10
+#define RNGA_VERIFICATION_CONTROL	0x14
+#define RNGA_OSC_CONTROL_COUNTER	0x18
+#define RNGA_OSC1_COUNTER		0x1c
+#define RNGA_OSC2_COUNTER		0x20
+#define RNGA_OSC_COUNTER_STATUS		0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE			0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP		0x00000010
+#define RNGA_CONTROL_CLEAR_INT		0x00000008
+#define RNGA_CONTROL_MASK_INTS		0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE	0x00000002
+#define RNGA_CONTROL_GO			0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK		0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD		0x80000000
+#define RNGA_STATUS_SLEEP		0x00000010
+#define RNGA_STATUS_ERROR_INT		0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW	0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS	0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION	0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+	int level;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* how many random numbers is in FIFO? [0-16] */
+	level = ((__raw_readl(rng_base + RNGA_STATUS) &
+			RNGA_STATUS_LEVEL_MASK) >> 8);
+
+	return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+	int err;
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* retrieve a random number from FIFO */
+	*data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+	/* some error while reading this random number? */
+	err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+	/* if error: clear error interrupt, but doesn't return random number */
+	if (err) {
+		dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+		ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+		__raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+					rng_base + RNGA_CONTROL);
+		return 0;
+	} else
+		return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+	u32 ctrl, osc;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* wake up */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+	/* verify if oscillator is working */
+	osc = __raw_readl(rng_base + RNGA_STATUS);
+	if (osc & RNGA_STATUS_OSC_DEAD) {
+		dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+		return -ENODEV;
+	}
+
+	/* go running */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+	return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+	/* stop rnga */
+	__raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+	.name = "mxc-rnga",
+	.init = mxc_rnga_init,
+	.cleanup = mxc_rnga_cleanup,
+	.data_present = mxc_rnga_data_present,
+	.data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	struct clk *clk;
+	struct resource *res, *mem;
+	void __iomem *rng_base = NULL;
+
+	if (rng_dev)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "rng");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Could not get rng_clk!\n");
+		err = PTR_ERR(clk);
+		goto out;
+	}
+
+	clk_enable(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENOENT;
+		goto err_region;
+	}
+
+	mem = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (mem == NULL) {
+		err = -EBUSY;
+		goto err_region;
+	}
+
+	rng_base = ioremap(res->start, resource_size(res));
+	if (!rng_base) {
+		err = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	mxc_rnga.priv = (unsigned long)rng_base;
+
+	err = hwrng_register(&mxc_rnga);
+	if (err) {
+		dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+		goto err_register;
+	}
+
+	rng_dev = pdev;
+
+	dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+	return 0;
+
+err_register:
+	iounmap(rng_base);
+	rng_base = NULL;
+
+err_ioremap:
+	release_mem_region(res->start, resource_size(res));
+
+err_region:
+	clk_disable(clk);
+	clk_put(clk);
+
+out:
+	return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+	struct clk *clk = clk_get(&pdev->dev, "rng");
+
+	hwrng_unregister(&mxc_rnga);
+
+	iounmap(rng_base);
+
+	release_mem_region(res->start, resource_size(res));
+
+	clk_disable(clk);
+	clk_put(clk);
+
+	return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+	.driver = {
+		   .name = "mxc_rnga",
+		   .owner = THIS_MODULE,
+		   },
+	.remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+	return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+	platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 538313f9e7a..00dd3de1be5 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -89,7 +89,7 @@ static struct hwrng omap_rng_ops = {
 	.data_read	= omap_rng_data_read,
 };
 
-static int __init omap_rng_probe(struct platform_device *pdev)
+static int __devinit omap_rng_probe(struct platform_device *pdev)
 {
 	struct resource *res, *mem;
 	int ret;
diff --git a/drivers/char/hw_random/timeriomem-rng.c b/drivers/char/hw_random/timeriomem-rng.c
index dcd352ad0e7..a94e930575f 100644
--- a/drivers/char/hw_random/timeriomem-rng.c
+++ b/drivers/char/hw_random/timeriomem-rng.c
@@ -88,9 +88,9 @@ static struct hwrng timeriomem_rng_ops = {
 	.priv		= 0,
 };
 
-static int __init timeriomem_rng_probe(struct platform_device *pdev)
+static int __devinit timeriomem_rng_probe(struct platform_device *pdev)
 {
-	struct resource *res, *mem;
+	struct resource *res;
 	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -98,21 +98,12 @@ static int __init timeriomem_rng_probe(struct platform_device *pdev)
 	if (!res)
 		return -ENOENT;
 
-	mem = request_mem_region(res->start, res->end - res->start + 1,
-				 pdev->name);
-	if (mem == NULL)
-		return -EBUSY;
-
-	dev_set_drvdata(&pdev->dev, mem);
-
 	timeriomem_rng_data = pdev->dev.platform_data;
 
 	timeriomem_rng_data->address = ioremap(res->start,
 						res->end - res->start + 1);
-	if (!timeriomem_rng_data->address) {
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
+	if (!timeriomem_rng_data->address)
+		return -EIO;
 
 	if (timeriomem_rng_data->period != 0
 		&& usecs_to_jiffies(timeriomem_rng_data->period) > 0) {
@@ -125,7 +116,7 @@ static int __init timeriomem_rng_probe(struct platform_device *pdev)
 
 	ret = hwrng_register(&timeriomem_rng_ops);
 	if (ret)
-		goto err_register;
+		goto failed;
 
 	dev_info(&pdev->dev, "32bits from 0x%p @ %dus\n",
 			timeriomem_rng_data->address,
@@ -133,24 +124,19 @@ static int __init timeriomem_rng_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_register:
+failed:
 	dev_err(&pdev->dev, "problem registering\n");
 	iounmap(timeriomem_rng_data->address);
-err_ioremap:
-	release_resource(mem);
 
 	return ret;
 }
 
 static int __devexit timeriomem_rng_remove(struct platform_device *pdev)
 {
-	struct resource *mem = dev_get_drvdata(&pdev->dev);
-
 	del_timer_sync(&timeriomem_rng_timer);
 	hwrng_unregister(&timeriomem_rng_ops);
 
 	iounmap(timeriomem_rng_data->address);
-	release_resource(mem);
 
 	return 0;
 }
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index 4e9573c1d39..794aacb715c 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -132,6 +132,19 @@ static int via_rng_init(struct hwrng *rng)
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 lo, hi, old_lo;
 
+	/* VIA Nano CPUs don't have the MSR_VIA_RNG anymore.  The RNG
+	 * is always enabled if CPUID rng_en is set.  There is no
+	 * RNG configuration like it used to be the case in this
+	 * register */
+	if ((c->x86 == 6) && (c->x86_model >= 0x0f)) {
+		if (!cpu_has_xstore_enabled) {
+			printk(KERN_ERR PFX "can't enable hardware RNG "
+				"if XSTORE is not enabled\n");
+			return -ENODEV;
+		}
+		return 0;
+	}
+
 	/* Control the RNG via MSR.  Tread lightly and pay very close
 	 * close attention to values written, as the reserved fields
 	 * are documented to be "undefined and unpredictable"; but it
@@ -205,5 +218,5 @@ static void __exit mod_exit(void)
 module_init(mod_init);
 module_exit(mod_exit);
 
-MODULE_DESCRIPTION("H/W RNG driver for VIA chipsets");
+MODULE_DESCRIPTION("H/W RNG driver for VIA CPU with PadLock");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 86e83f88313..32216b62324 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -35,13 +35,13 @@ static DECLARE_COMPLETION(have_data);
 
 static void random_recv_done(struct virtqueue *vq)
 {
-	int len;
+	unsigned int len;
 
 	/* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
 	if (!vq->vq_ops->get_buf(vq, &len))
 		return;
 
-	data_left = len / sizeof(random_data[0]);
+	data_left += len;
 	complete(&have_data);
 }
 
@@ -49,7 +49,7 @@ static void register_buffer(void)
 {
 	struct scatterlist sg;
 
-	sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+	sg_init_one(&sg, random_data+data_left, RANDOM_DATA_SIZE-data_left);
 	/* There should always be room for one buffer. */
 	if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
 		BUG();
@@ -59,24 +59,32 @@ static void register_buffer(void)
 /* At least we don't udelay() in a loop like some other drivers. */
 static int virtio_data_present(struct hwrng *rng, int wait)
 {
-	if (data_left)
+	if (data_left >= sizeof(u32))
 		return 1;
 
+again:
 	if (!wait)
 		return 0;
 
 	wait_for_completion(&have_data);
+
+	/* Not enough?  Re-register. */
+	if (unlikely(data_left < sizeof(u32))) {
+		register_buffer();
+		goto again;
+	}
+
 	return 1;
 }
 
 /* virtio_data_present() must have succeeded before this is called. */
 static int virtio_data_read(struct hwrng *rng, u32 *data)
 {
-	BUG_ON(!data_left);
-
-	*data = random_data[--data_left];
+	BUG_ON(data_left < sizeof(u32));
+	data_left -= sizeof(u32);
+	*data = random_data[data_left / 4];
 
-	if (!data_left) {
+	if (data_left < sizeof(u32)) {
 		init_completion(&have_data);
 		register_buffer();
 	}
@@ -94,13 +102,13 @@ static int virtrng_probe(struct virtio_device *vdev)
 	int err;
 
 	/* We expect a single virtqueue. */
-	vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+	vq = virtio_find_single_vq(vdev, random_recv_done, "input");
 	if (IS_ERR(vq))
 		return PTR_ERR(vq);
 
 	err = hwrng_register(&virtio_hwrng);
 	if (err) {
-		vdev->config->del_vq(vq);
+		vdev->config->del_vqs(vdev);
 		return err;
 	}
 
@@ -112,7 +120,7 @@ static void virtrng_remove(struct virtio_device *vdev)
 {
 	vdev->config->reset(vdev);
 	hwrng_unregister(&virtio_hwrng);
-	vdev->config->del_vq(vq);
+	vdev->config->del_vqs(vdev);
 }
 
 static struct virtio_device_id id_table[] = {
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index 0061e18aff6..0d10b89218e 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -868,11 +868,11 @@ i2Input(i2ChanStrPtr pCh)
 		amountToMove = count;
 	}
 	// Move the first block
-	pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
+	pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
 		 &(pCh->Ibuf[stripIndex]), NULL, amountToMove );
 	// If we needed to wrap, do the second data move
 	if (count > amountToMove) {
-		pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
+		pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
 		 pCh->Ibuf, NULL, count - amountToMove );
 	}
 	// Bump and wrap the stripIndex all at once by the amount of data read. This
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index afd9247cf08..517271c762e 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1315,8 +1315,8 @@ static inline void  isig(int sig, struct tty_struct *tty, int flush)
 	if (tty->pgrp)
 		kill_pgrp(tty->pgrp, sig, 1);
 	if (flush || !L_NOFLSH(tty)) {
-		if ( tty->ldisc.ops->flush_buffer )  
-			tty->ldisc.ops->flush_buffer(tty);
+		if ( tty->ldisc->ops->flush_buffer )  
+			tty->ldisc->ops->flush_buffer(tty);
 		i2InputFlush( tty->driver_data );
 	}
 }
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index aa83a0865ec..09050797c76 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2856,6 +2856,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
 		/* Assume a single IPMB channel at zero. */
 		intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB;
 		intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB;
+		intf->curr_channel = IPMI_MAX_CHANNELS;
 	}
 
 	if (rv == 0)
@@ -3648,13 +3649,13 @@ static int handle_new_recv_msg(ipmi_smi_t          intf,
 		}
 
 		/*
-		** We need to make sure the channels have been initialized.
-		** The channel_handler routine will set the "curr_channel"
-		** equal to or greater than IPMI_MAX_CHANNELS when all the
-		** channels for this interface have been initialized.
-		*/
+		 * We need to make sure the channels have been initialized.
+		 * The channel_handler routine will set the "curr_channel"
+		 * equal to or greater than IPMI_MAX_CHANNELS when all the
+		 * channels for this interface have been initialized.
+		 */
 		if (intf->curr_channel < IPMI_MAX_CHANNELS) {
-			requeue = 1;     /* Just put the message back for now */
+			requeue = 0; /* Throw the message away */
 			goto out;
 		}
 
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index a59eac584d1..4d745a89504 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -329,7 +329,7 @@ static inline void drop_rts(struct isi_port *port)
 
 /* card->lock MUST NOT be held */
 
-static void isicom_raise_dtr_rts(struct tty_port *port)
+static void isicom_dtr_rts(struct tty_port *port, int on)
 {
 	struct isi_port *ip = container_of(port, struct isi_port, port);
 	struct isi_board *card = ip->card;
@@ -339,10 +339,17 @@ static void isicom_raise_dtr_rts(struct tty_port *port)
 	if (!lock_card(card))
 		return;
 
-	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
-	outw(0x0f04, base);
-	InterruptTheCard(base);
-	ip->status |= (ISI_DTR | ISI_RTS);
+	if (on) {
+		outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+		outw(0x0f04, base);
+		InterruptTheCard(base);
+		ip->status |= (ISI_DTR | ISI_RTS);
+	} else {
+		outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+		outw(0x0C04, base);
+		InterruptTheCard(base);
+		ip->status &= ~(ISI_DTR | ISI_RTS);
+	}
 	unlock_card(card);
 }
 
@@ -1339,7 +1346,7 @@ static const struct tty_operations isicom_ops = {
 
 static const struct tty_port_operations isicom_port_ops = {
 	.carrier_raised		= isicom_carrier_raised,
-	.raise_dtr_rts		= isicom_raise_dtr_rts,
+	.dtr_rts		= isicom_dtr_rts,
 };
 
 static int __devinit reset_card(struct pci_dev *pdev,
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index fff19f7e29d..e18800c400b 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -1140,14 +1140,14 @@ static int stli_carrier_raised(struct tty_port *port)
 	return (portp->sigs & TIOCM_CD) ? 1 : 0;
 }
 
-static void stli_raise_dtr_rts(struct tty_port *port)
+static void stli_dtr_rts(struct tty_port *port, int on)
 {
 	struct stliport *portp = container_of(port, struct stliport, port);
 	struct stlibrd *brdp = stli_brds[portp->brdnr];
-	stli_mkasysigs(&portp->asig, 1, 1);
+	stli_mkasysigs(&portp->asig, on, on);
 	if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
 		sizeof(asysigs_t), 0) < 0)
-			printk(KERN_WARNING "istallion: dtr raise failed.\n");
+			printk(KERN_WARNING "istallion: dtr set failed.\n");
 }
 
 
@@ -4417,7 +4417,7 @@ static const struct tty_operations stli_ops = {
 
 static const struct tty_port_operations stli_port_ops = {
 	.carrier_raised = stli_carrier_raised,
-	.raise_dtr_rts = stli_raise_dtr_rts,
+	.dtr_rts = stli_dtr_rts,
 };
 
 /*****************************************************************************/
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 8f05c38c2f0..f96d0bef855 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -694,6 +694,8 @@ static ssize_t read_zero(struct file * file, char __user * buf,
 		written += chunk - unwritten;
 		if (unwritten)
 			break;
+		if (signal_pending(current))
+			return written ? written : -ERESTARTSYS;
 		buf += chunk;
 		count -= chunk;
 		cond_resched();
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 4a4cab73d0b..65b6ff2442c 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -1184,6 +1184,11 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
 		return -ENODEV;
 	}
 
+	if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
+		mutex_unlock(&moxa_openlock);
+		return -ENODEV;
+	}
+
 	ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
 	ch->port.count++;
 	tty->driver_data = ch;
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index a420e8d437d..9533f43a30b 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -547,14 +547,18 @@ static int mxser_carrier_raised(struct tty_port *port)
 	return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
 }
 
-static void mxser_raise_dtr_rts(struct tty_port *port)
+static void mxser_dtr_rts(struct tty_port *port, int on)
 {
 	struct mxser_port *mp = container_of(port, struct mxser_port, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&mp->slock, flags);
-	outb(inb(mp->ioaddr + UART_MCR) |
-		UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+	if (on)
+		outb(inb(mp->ioaddr + UART_MCR) |
+			UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+	else
+		outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
+			mp->ioaddr + UART_MCR);
 	spin_unlock_irqrestore(&mp->slock, flags);
 }
 
@@ -2356,7 +2360,7 @@ static const struct tty_operations mxser_ops = {
 
 struct tty_port_operations mxser_port_ops = {
 	.carrier_raised = mxser_carrier_raised,
-	.raise_dtr_rts = mxser_raise_dtr_rts,
+	.dtr_rts = mxser_dtr_rts,
 };
 
 /*
@@ -2711,7 +2715,7 @@ static int __init mxser_module_init(void)
 			continue;
 
 		brd = &mxser_boards[m];
-		retval = mxser_get_ISA_conf(!ioaddr[b], brd);
+		retval = mxser_get_ISA_conf(ioaddr[b], brd);
 		if (retval <= 0) {
 			brd->info = NULL;
 			continue;
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index bacb3e2872a..461ece591a5 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -342,8 +342,8 @@ static int n_hdlc_tty_open (struct tty_struct *tty)
 #endif
 	
 	/* Flush any pending characters in the driver and discipline. */
-	if (tty->ldisc.ops->flush_buffer)
-		tty->ldisc.ops->flush_buffer(tty);
+	if (tty->ldisc->ops->flush_buffer)
+		tty->ldisc->ops->flush_buffer(tty);
 
 	tty_driver_flush_buffer(tty);
 		
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index f6f0e4ec2b5..94a5d5020ab 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -73,24 +73,6 @@
 #define ECHO_OP_SET_CANON_COL 0x81
 #define ECHO_OP_ERASE_TAB 0x82
 
-static inline unsigned char *alloc_buf(void)
-{
-	gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
-
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		return kmalloc(N_TTY_BUF_SIZE, prio);
-	else
-		return (unsigned char *)__get_free_page(prio);
-}
-
-static inline void free_buf(unsigned char *buf)
-{
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		kfree(buf);
-	else
-		free_page((unsigned long) buf);
-}
-
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 			       unsigned char __user *ptr)
 {
@@ -1558,11 +1540,11 @@ static void n_tty_close(struct tty_struct *tty)
 {
 	n_tty_flush_buffer(tty);
 	if (tty->read_buf) {
-		free_buf(tty->read_buf);
+		kfree(tty->read_buf);
 		tty->read_buf = NULL;
 	}
 	if (tty->echo_buf) {
-		free_buf(tty->echo_buf);
+		kfree(tty->echo_buf);
 		tty->echo_buf = NULL;
 	}
 }
@@ -1584,17 +1566,16 @@ static int n_tty_open(struct tty_struct *tty)
 
 	/* These are ugly. Currently a malloc failure here can panic */
 	if (!tty->read_buf) {
-		tty->read_buf = alloc_buf();
+		tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 		if (!tty->read_buf)
 			return -ENOMEM;
 	}
 	if (!tty->echo_buf) {
-		tty->echo_buf = alloc_buf();
+		tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+
 		if (!tty->echo_buf)
 			return -ENOMEM;
 	}
-	memset(tty->read_buf, 0, N_TTY_BUF_SIZE);
-	memset(tty->echo_buf, 0, N_TTY_BUF_SIZE);
 	reset_buffer_flags(tty);
 	tty->column = 0;
 	n_tty_set_termios(tty, NULL);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 19d79fc5446..77b36488922 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -383,7 +383,7 @@ static void async_mode(MGSLPC_INFO *info);
 static void tx_timeout(unsigned long context);
 
 static int carrier_raised(struct tty_port *port);
-static void raise_dtr_rts(struct tty_port *port);
+static void dtr_rts(struct tty_port *port, int onoff);
 
 #if SYNCLINK_GENERIC_HDLC
 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
@@ -513,7 +513,7 @@ static void ldisc_receive_buf(struct tty_struct *tty,
 
 static const struct tty_port_operations mgslpc_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts
+	.dtr_rts = dtr_rts
 };
 
 static int mgslpc_probe(struct pcmcia_device *link)
@@ -2528,13 +2528,16 @@ static int carrier_raised(struct tty_port *port)
 	return 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int onoff)
 {
 	MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
-	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (onoff)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR;
 	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 31038a0052a..5acd29e6e04 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -30,7 +30,6 @@
 
 #include <asm/system.h>
 
-/* These are global because they are accessed in tty_io.c */
 #ifdef CONFIG_UNIX98_PTYS
 static struct tty_driver *ptm_driver;
 static struct tty_driver *pts_driver;
@@ -111,7 +110,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf,
 	c = to->receive_room;
 	if (c > count)
 		c = count;
-	to->ldisc.ops->receive_buf(to, buf, NULL, c);
+	to->ldisc->ops->receive_buf(to, buf, NULL, c);
 
 	return c;
 }
@@ -149,11 +148,11 @@ static int pty_chars_in_buffer(struct tty_struct *tty)
 	int count;
 
 	/* We should get the line discipline lock for "tty->link" */
-	if (!to || !to->ldisc.ops->chars_in_buffer)
+	if (!to || !to->ldisc->ops->chars_in_buffer)
 		return 0;
 
 	/* The ldisc must report 0 if no characters available to be read */
-	count = to->ldisc.ops->chars_in_buffer(to);
+	count = to->ldisc->ops->chars_in_buffer(to);
 
 	if (tty->driver->subtype == PTY_TYPE_SLAVE)
 		return count;
@@ -187,8 +186,8 @@ static void pty_flush_buffer(struct tty_struct *tty)
 	if (!to)
 		return;
 
-	if (to->ldisc.ops->flush_buffer)
-		to->ldisc.ops->flush_buffer(to);
+	if (to->ldisc->ops->flush_buffer)
+		to->ldisc->ops->flush_buffer(to);
 
 	if (to->packet) {
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
diff --git a/drivers/char/random.c b/drivers/char/random.c
index b2ced39d76b..8c7444857a4 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1673,7 +1673,7 @@ unsigned int get_random_int(void)
 	int ret;
 
 	keyptr = get_keyptr();
-	hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret;
+	hash[0] += current->pid + jiffies + get_cycles();
 
 	ret = half_md4_transform(hash, keyptr->secret);
 	put_cpu_var(get_random_int_hash);
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 20d90e6a6e5..db32f0e4c7d 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -71,7 +71,7 @@ static int raw_open(struct inode *inode, struct file *filp)
 	err = bd_claim(bdev, raw_open);
 	if (err)
 		goto out1;
-	err = set_blocksize(bdev, bdev_hardsect_size(bdev));
+	err = set_blocksize(bdev, bdev_logical_block_size(bdev));
 	if (err)
 		goto out2;
 	filp->f_flags |= O_DIRECT;
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index f59fc5cea06..63d5b628477 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -872,11 +872,16 @@ static int carrier_raised(struct tty_port *port)
 	return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	struct r_port *info = container_of(port, struct r_port, port);
-	sSetDTR(&info->channel);
-	sSetRTS(&info->channel);
+	if (on) {
+		sSetDTR(&info->channel);
+		sSetRTS(&info->channel);
+	} else {
+		sClrDTR(&info->channel);
+		sClrRTS(&info->channel);
+	}
 }
 
 /*
@@ -934,7 +939,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Info->count is now 1; so it's safe to sleep now.
 	 */
-	if (!test_bit(ASYNC_INITIALIZED, &port->flags)) {
+	if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
 		cp = &info->channel;
 		sSetRxTrigger(cp, TRIG_1);
 		if (sGetChanStatus(cp) & CD_ACT)
@@ -958,7 +963,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 		sEnRxFIFO(cp);
 		sEnTransmit(cp);
 
-		set_bit(ASYNC_INITIALIZED, &info->port.flags);
+		set_bit(ASYNCB_INITIALIZED, &info->port.flags);
 
 		/*
 		 * Set up the tty->alt_speed kludge
@@ -1641,7 +1646,7 @@ static int rp_write(struct tty_struct *tty,
 	/*  Write remaining data into the port's xmit_buf */
 	while (1) {
 		/* Hung up ? */
-		if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags))
+		if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags))
 			goto end;
 		c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
 		c = min(c, XMIT_BUF_SIZE - info->xmit_head);
@@ -2250,7 +2255,7 @@ static const struct tty_operations rocket_ops = {
 
 static const struct tty_port_operations rocket_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 /*
diff --git a/drivers/char/selection.c b/drivers/char/selection.c
index cb8ca569896..f97b9e84806 100644
--- a/drivers/char/selection.c
+++ b/drivers/char/selection.c
@@ -327,7 +327,7 @@ int paste_selection(struct tty_struct *tty)
 		}
 		count = sel_buffer_lth - pasted;
 		count = min(count, tty->receive_room);
-		tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted,
+		tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
 								NULL, count);
 		pasted += count;
 	}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 2ad813a801d..53e504f41b2 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -772,11 +772,11 @@ static int stl_carrier_raised(struct tty_port *port)
 	return (portp->sigs & TIOCM_CD) ? 1 : 0;
 }
 
-static void stl_raise_dtr_rts(struct tty_port *port)
+static void stl_dtr_rts(struct tty_port *port, int on)
 {
 	struct stlport *portp = container_of(port, struct stlport, port);
 	/* Takes brd_lock internally */
-	stl_setsignals(portp, 1, 1);
+	stl_setsignals(portp, on, on);
 }
 
 /*****************************************************************************/
@@ -2547,7 +2547,7 @@ static const struct tty_operations stl_ops = {
 
 static const struct tty_port_operations stl_port_ops = {
 	.carrier_raised = stl_carrier_raised,
-	.raise_dtr_rts = stl_raise_dtr_rts,
+	.dtr_rts = stl_dtr_rts,
 };
 
 /*****************************************************************************/
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index afd0b26ca05..afded3a2379 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -3247,13 +3247,16 @@ static int carrier_raised(struct tty_port *port)
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->irq_spinlock,flags);
-	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (on)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
  	usc_set_serial_signals(info);
 	spin_unlock_irqrestore(&info->irq_spinlock,flags);
 }
@@ -4258,7 +4261,7 @@ static void mgsl_add_device( struct mgsl_struct *info )
 
 static const struct tty_port_operations mgsl_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 5e256494686..1386625fc4c 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -214,6 +214,7 @@ struct slgt_desc
 #define set_desc_next(a,b) (a).next   = cpu_to_le32((unsigned int)(b))
 #define set_desc_count(a,b)(a).count  = cpu_to_le16((unsigned short)(b))
 #define set_desc_eof(a,b)  (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
+#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
 #define desc_count(a)      (le16_to_cpu((a).count))
 #define desc_status(a)     (le16_to_cpu((a).status))
 #define desc_complete(a)   (le16_to_cpu((a).status) & BIT15)
@@ -297,6 +298,7 @@ struct slgt_info {
 	u32 max_frame_size;       /* as set by device config */
 
 	unsigned int rbuf_fill_level;
+	unsigned int rx_pio;
 	unsigned int if_mode;
 	unsigned int base_clock;
 
@@ -331,6 +333,8 @@ struct slgt_info {
 	struct slgt_desc *rbufs;
 	unsigned int rbuf_current;
 	unsigned int rbuf_index;
+	unsigned int rbuf_fill_index;
+	unsigned short rbuf_fill_count;
 
 	unsigned int tbuf_count;
 	struct slgt_desc *tbufs;
@@ -2110,6 +2114,40 @@ static void ri_change(struct slgt_info *info, unsigned short status)
 	info->pending_bh |= BH_STATUS;
 }
 
+static void isr_rxdata(struct slgt_info *info)
+{
+	unsigned int count = info->rbuf_fill_count;
+	unsigned int i = info->rbuf_fill_index;
+	unsigned short reg;
+
+	while (rd_reg16(info, SSR) & IRQ_RXDATA) {
+		reg = rd_reg16(info, RDR);
+		DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
+		if (desc_complete(info->rbufs[i])) {
+			/* all buffers full */
+			rx_stop(info);
+			info->rx_restart = 1;
+			continue;
+		}
+		info->rbufs[i].buf[count++] = (unsigned char)reg;
+		/* async mode saves status byte to buffer for each data byte */
+		if (info->params.mode == MGSL_MODE_ASYNC)
+			info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
+		if (count == info->rbuf_fill_level || (reg & BIT10)) {
+			/* buffer full or end of frame */
+			set_desc_count(info->rbufs[i], count);
+			set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
+			info->rbuf_fill_count = count = 0;
+			if (++i == info->rbuf_count)
+				i = 0;
+			info->pending_bh |= BH_RECEIVE;
+		}
+	}
+
+	info->rbuf_fill_index = i;
+	info->rbuf_fill_count = count;
+}
+
 static void isr_serial(struct slgt_info *info)
 {
 	unsigned short status = rd_reg16(info, SSR);
@@ -2125,6 +2163,8 @@ static void isr_serial(struct slgt_info *info)
 			if (info->tx_count)
 				isr_txeom(info, status);
 		}
+		if (info->rx_pio && (status & IRQ_RXDATA))
+			isr_rxdata(info);
 		if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
 			info->icount.brk++;
 			/* process break detection if tty control allows */
@@ -2141,7 +2181,8 @@ static void isr_serial(struct slgt_info *info)
 	} else {
 		if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
 			isr_txeom(info, status);
-
+		if (info->rx_pio && (status & IRQ_RXDATA))
+			isr_rxdata(info);
 		if (status & IRQ_RXIDLE) {
 			if (status & RXIDLE)
 				info->icount.rxidle++;
@@ -2642,6 +2683,10 @@ static int rx_enable(struct slgt_info *info, int enable)
 			return -EINVAL;
 		}
 		info->rbuf_fill_level = rbuf_fill_level;
+		if (rbuf_fill_level < 128)
+			info->rx_pio = 1; /* PIO mode */
+		else
+			info->rx_pio = 0; /* DMA mode */
 		rx_stop(info); /* restart receiver to use new fill level */
 	}
 
@@ -3099,13 +3144,16 @@ static int carrier_raised(struct tty_port *port)
 	return (info->signals & SerialSignal_DCD) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	unsigned long flags;
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
-	info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (on)
+		info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
  	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
@@ -3419,7 +3467,7 @@ static void add_device(struct slgt_info *info)
 
 static const struct tty_port_operations slgt_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 /*
@@ -3841,15 +3889,27 @@ static void rx_start(struct slgt_info *info)
 	rdma_reset(info);
 	reset_rbufs(info);
 
-	/* set 1st descriptor address */
-	wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
-
-	if (info->params.mode != MGSL_MODE_ASYNC) {
-		/* enable rx DMA and DMA interrupt */
-		wr_reg32(info, RDCSR, (BIT2 + BIT0));
+	if (info->rx_pio) {
+		/* rx request when rx FIFO not empty */
+		wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
+		slgt_irq_on(info, IRQ_RXDATA);
+		if (info->params.mode == MGSL_MODE_ASYNC) {
+			/* enable saving of rx status */
+			wr_reg32(info, RDCSR, BIT6);
+		}
 	} else {
-		/* enable saving of rx status, rx DMA and DMA interrupt */
-		wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+		/* rx request when rx FIFO half full */
+		wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
+		/* set 1st descriptor address */
+		wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
+
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			/* enable rx DMA and DMA interrupt */
+			wr_reg32(info, RDCSR, (BIT2 + BIT0));
+		} else {
+			/* enable saving of rx status, rx DMA and DMA interrupt */
+			wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+		}
 	}
 
 	slgt_irq_on(info, IRQ_RXOVER);
@@ -4467,6 +4527,8 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last
 static void reset_rbufs(struct slgt_info *info)
 {
 	free_rbufs(info, 0, info->rbuf_count - 1);
+	info->rbuf_fill_index = 0;
+	info->rbuf_fill_count = 0;
 }
 
 /*
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 26de60efe4b..6f727e3c53a 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -3277,13 +3277,16 @@ static int carrier_raised(struct tty_port *port)
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	SLMP_INFO *info = container_of(port, SLMP_INFO, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
-	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (on)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
  	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
@@ -3746,7 +3749,7 @@ static void add_device(SLMP_INFO *info)
 
 static const struct tty_port_operations port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 /* Allocate and initialize a device instance structure
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index b0a6a3e5192..39a05b5fa9c 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -25,6 +25,7 @@
 #include <linux/kbd_kern.h>
 #include <linux/proc_fs.h>
 #include <linux/quotaops.h>
+#include <linux/perf_counter.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/suspend.h>
@@ -243,6 +244,7 @@ static void sysrq_handle_showregs(int key, struct tty_struct *tty)
 	struct pt_regs *regs = get_irq_regs();
 	if (regs)
 		show_regs(regs);
+	perf_counter_print_debug();
 }
 static struct sysrq_key_op sysrq_showregs_op = {
 	.handler	= sysrq_handle_showregs,
@@ -406,7 +408,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_showlocks_op,		/* d */
 	&sysrq_term_op,			/* e */
 	&sysrq_moom_op,			/* f */
-	/* g: May be registered by ppc for kgdb */
+	/* g: May be registered for the kernel debugger */
 	NULL,				/* g */
 	NULL,				/* h - reserved for help */
 	&sysrq_kill_op,			/* i */
@@ -431,7 +433,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_sync_op,			/* s */
 	&sysrq_showstate_op,		/* t */
 	&sysrq_mountro_op,		/* u */
-	/* v: May be registered at init time by SMP VOYAGER */
+	/* v: May be registered for frame buffer console restore */
 	NULL,				/* v */
 	&sysrq_showstate_blocked_op,	/* w */
 	/* x: May be registered on ppc/powerpc for xmon */
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index ed306eb1057..0c2f55a38b9 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 			unsigned char * event_entry)
 {
 	const char *name = "";
-	char data[40] = "";
+	/* 41 so there is room for 40 data and 1 nul */
+	char data[41] = "";
 	int i, n_len = 0, d_len = 0;
 	struct tcpa_pc_event *pc_event;
 
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 55ba6f14288..ac16fbec72d 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -29,10 +29,7 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
 	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
 	if (!buf)
 		goto err;
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
-	else
-		buf->data = (unsigned char *)__get_free_page(GFP_KERNEL);
+	buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 	if (!buf->data)
 		goto err_buf;
 	atomic_set(&buf->count, 1);
@@ -52,10 +49,7 @@ err:
 static void tty_audit_buf_free(struct tty_audit_buf *buf)
 {
 	WARN_ON(buf->valid != 0);
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		kfree(buf->data);
-	else
-		free_page((unsigned long)buf->data);
+	kfree(buf->data);
 	kfree(buf);
 }
 
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 66b99a2049e..939e198d767 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -295,7 +295,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
 	struct tty_driver *p, *res = NULL;
 	int tty_line = 0;
 	int len;
-	char *str;
+	char *str, *stp;
 
 	for (str = name; *str; str++)
 		if ((*str >= '0' && *str <= '9') || *str == ',')
@@ -311,13 +311,14 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
 	list_for_each_entry(p, &tty_drivers, tty_drivers) {
 		if (strncmp(name, p->name, len) != 0)
 			continue;
-		if (*str == ',')
-			str++;
-		if (*str == '\0')
-			str = NULL;
+		stp = str;
+		if (*stp == ',')
+			stp++;
+		if (*stp == '\0')
+			stp = NULL;
 
 		if (tty_line >= 0 && tty_line <= p->num && p->ops &&
-		    p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
+		    p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
 			res = tty_driver_kref_get(p);
 			*line = tty_line;
 			break;
@@ -470,43 +471,6 @@ void tty_wakeup(struct tty_struct *tty)
 EXPORT_SYMBOL_GPL(tty_wakeup);
 
 /**
- *	tty_ldisc_flush	-	flush line discipline queue
- *	@tty: tty
- *
- *	Flush the line discipline queue (if any) for this tty. If there
- *	is no line discipline active this is a no-op.
- */
-
-void tty_ldisc_flush(struct tty_struct *tty)
-{
-	struct tty_ldisc *ld = tty_ldisc_ref(tty);
-	if (ld) {
-		if (ld->ops->flush_buffer)
-			ld->ops->flush_buffer(tty);
-		tty_ldisc_deref(ld);
-	}
-	tty_buffer_flush(tty);
-}
-
-EXPORT_SYMBOL_GPL(tty_ldisc_flush);
-
-/**
- *	tty_reset_termios	-	reset terminal state
- *	@tty: tty to reset
- *
- *	Restore a terminal to the driver default state
- */
-
-static void tty_reset_termios(struct tty_struct *tty)
-{
-	mutex_lock(&tty->termios_mutex);
-	*tty->termios = tty->driver->init_termios;
-	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
-	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
-	mutex_unlock(&tty->termios_mutex);
-}
-
-/**
  *	do_tty_hangup		-	actual handler for hangup events
  *	@work: tty device
  *
@@ -535,7 +499,6 @@ static void do_tty_hangup(struct work_struct *work)
 	struct file *cons_filp = NULL;
 	struct file *filp, *f = NULL;
 	struct task_struct *p;
-	struct tty_ldisc *ld;
 	int    closecount = 0, n;
 	unsigned long flags;
 	int refs = 0;
@@ -566,40 +529,8 @@ static void do_tty_hangup(struct work_struct *work)
 		filp->f_op = &hung_up_tty_fops;
 	}
 	file_list_unlock();
-	/*
-	 * FIXME! What are the locking issues here? This may me overdoing
-	 * things... This question is especially important now that we've
-	 * removed the irqlock.
-	 */
-	ld = tty_ldisc_ref(tty);
-	if (ld != NULL) {
-		/* We may have no line discipline at this point */
-		if (ld->ops->flush_buffer)
-			ld->ops->flush_buffer(tty);
-		tty_driver_flush_buffer(tty);
-		if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
-		    ld->ops->write_wakeup)
-			ld->ops->write_wakeup(tty);
-		if (ld->ops->hangup)
-			ld->ops->hangup(tty);
-	}
-	/*
-	 * FIXME: Once we trust the LDISC code better we can wait here for
-	 * ldisc completion and fix the driver call race
-	 */
-	wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
-	wake_up_interruptible_poll(&tty->read_wait, POLLIN);
-	/*
-	 * Shutdown the current line discipline, and reset it to
-	 * N_TTY.
-	 */
-	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
-		tty_reset_termios(tty);
-	/* Defer ldisc switch */
-	/* tty_deferred_ldisc_switch(N_TTY);
 
-	  This should get done automatically when the port closes and
-	  tty_release is called */
+	tty_ldisc_hangup(tty);
 
 	read_lock(&tasklist_lock);
 	if (tty->session) {
@@ -628,12 +559,15 @@ static void do_tty_hangup(struct work_struct *work)
 	read_unlock(&tasklist_lock);
 
 	spin_lock_irqsave(&tty->ctrl_lock, flags);
-	tty->flags = 0;
+	clear_bit(TTY_THROTTLED, &tty->flags);
+	clear_bit(TTY_PUSH, &tty->flags);
+	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	put_pid(tty->session);
 	put_pid(tty->pgrp);
 	tty->session = NULL;
 	tty->pgrp = NULL;
 	tty->ctrl_status = 0;
+	set_bit(TTY_HUPPED, &tty->flags);
 	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 
 	/* Account for the p->signal references we killed */
@@ -659,10 +593,7 @@ static void do_tty_hangup(struct work_struct *work)
 	 * can't yet guarantee all that.
 	 */
 	set_bit(TTY_HUPPED, &tty->flags);
-	if (ld) {
-		tty_ldisc_enable(tty);
-		tty_ldisc_deref(ld);
-	}
+	tty_ldisc_enable(tty);
 	unlock_kernel();
 	if (f)
 		fput(f);
@@ -2480,6 +2411,24 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
 	return tty->ops->tiocmset(tty, file, set, clear);
 }
 
+struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
+{
+	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+	    tty->driver->subtype == PTY_TYPE_MASTER)
+		tty = tty->link;
+	return tty;
+}
+EXPORT_SYMBOL(tty_pair_get_tty);
+
+struct tty_struct *tty_pair_get_pty(struct tty_struct *tty)
+{
+	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+	    tty->driver->subtype == PTY_TYPE_MASTER)
+	    return tty;
+	return tty->link;
+}
+EXPORT_SYMBOL(tty_pair_get_pty);
+
 /*
  * Split this up, as gcc can choke on it otherwise..
  */
@@ -2495,11 +2444,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (tty_paranoia_check(tty, inode, "tty_ioctl"))
 		return -EINVAL;
 
-	real_tty = tty;
-	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
-	    tty->driver->subtype == PTY_TYPE_MASTER)
-		real_tty = tty->link;
-
+	real_tty = tty_pair_get_tty(tty);
 
 	/*
 	 * Factor out some common prep work
@@ -2555,7 +2500,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case TIOCGSID:
 		return tiocgsid(tty, real_tty, p);
 	case TIOCGETD:
-		return put_user(tty->ldisc.ops->num, (int __user *)p);
+		return put_user(tty->ldisc->ops->num, (int __user *)p);
 	case TIOCSETD:
 		return tiocsetd(tty, p);
 	/*
@@ -2770,6 +2715,7 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty->buf.head = tty->buf.tail = NULL;
 	tty_buffer_init(tty);
 	mutex_init(&tty->termios_mutex);
+	mutex_init(&tty->ldisc_mutex);
 	init_waitqueue_head(&tty->write_wait);
 	init_waitqueue_head(&tty->read_wait);
 	INIT_WORK(&tty->hangup_work, do_tty_hangup);
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 6f4c7d0a53b..8116bb1c8f8 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -97,14 +97,19 @@ EXPORT_SYMBOL(tty_driver_flush_buffer);
  *	@tty: terminal
  *
  *	Indicate that a tty should stop transmitting data down the stack.
+ *	Takes the termios mutex to protect against parallel throttle/unthrottle
+ *	and also to ensure the driver can consistently reference its own
+ *	termios data at this point when implementing software flow control.
  */
 
 void tty_throttle(struct tty_struct *tty)
 {
+	mutex_lock(&tty->termios_mutex);
 	/* check TTY_THROTTLED first so it indicates our state */
 	if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
 	    tty->ops->throttle)
 		tty->ops->throttle(tty);
+	mutex_unlock(&tty->termios_mutex);
 }
 EXPORT_SYMBOL(tty_throttle);
 
@@ -113,13 +118,21 @@ EXPORT_SYMBOL(tty_throttle);
  *	@tty: terminal
  *
  *	Indicate that a tty may continue transmitting data down the stack.
+ *	Takes the termios mutex to protect against parallel throttle/unthrottle
+ *	and also to ensure the driver can consistently reference its own
+ *	termios data at this point when implementing software flow control.
+ *
+ *	Drivers should however remember that the stack can issue a throttle,
+ *	then change flow control method, then unthrottle.
  */
 
 void tty_unthrottle(struct tty_struct *tty)
 {
+	mutex_lock(&tty->termios_mutex);
 	if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
 	    tty->ops->unthrottle)
 		tty->ops->unthrottle(tty);
+	mutex_unlock(&tty->termios_mutex);
 }
 EXPORT_SYMBOL(tty_unthrottle);
 
@@ -613,9 +626,25 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
 	return 0;
 }
 
+static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
+{
+	mutex_lock(&tty->termios_mutex);
+	memcpy(kterm, tty->termios, sizeof(struct ktermios));
+	mutex_unlock(&tty->termios_mutex);
+}
+
+static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
+{
+	mutex_lock(&tty->termios_mutex);
+	memcpy(kterm, tty->termios_locked, sizeof(struct ktermios));
+	mutex_unlock(&tty->termios_mutex);
+}
+
 static int get_termio(struct tty_struct *tty, struct termio __user *termio)
 {
-	if (kernel_termios_to_user_termio(termio, tty->termios))
+	struct ktermios kterm;
+	copy_termios(tty, &kterm);
+	if (kernel_termios_to_user_termio(termio, &kterm))
 		return -EFAULT;
 	return 0;
 }
@@ -917,6 +946,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 	struct tty_struct *real_tty;
 	void __user *p = (void __user *)arg;
 	int ret = 0;
+	struct ktermios kterm;
+	struct termiox ktermx;
 
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
@@ -952,23 +983,20 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return set_termios(real_tty, p, TERMIOS_OLD);
 #ifndef TCGETS2
 	case TCGETS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
+		copy_termios(real_tty, &kterm);
+		if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 #else
 	case TCGETS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
+		copy_termios(real_tty, &kterm);
+		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TCGETS2:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
+		copy_termios(real_tty, &kterm);
+		if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TCSETSF2:
 		return set_termios(real_tty, p,  TERMIOS_FLUSH | TERMIOS_WAIT);
@@ -987,34 +1015,36 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return set_termios(real_tty, p, TERMIOS_TERMIO);
 #ifndef TCGETS2
 	case TIOCGLCKTRMIOS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
+		copy_termios_locked(real_tty, &kterm);
+		if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TIOCSLCKTRMIOS:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		mutex_lock(&real_tty->termios_mutex);
-		if (user_termios_to_kernel_termios(real_tty->termios_locked,
+		copy_termios_locked(real_tty, &kterm);
+		if (user_termios_to_kernel_termios(&kterm,
 					       (struct termios __user *) arg))
-			ret = -EFAULT;
+			return -EFAULT;
+		mutex_lock(&real_tty->termios_mutex);
+		memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
 		mutex_unlock(&real_tty->termios_mutex);
-		return ret;
+		return 0;
 #else
 	case TIOCGLCKTRMIOS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
+		copy_termios_locked(real_tty, &kterm);
+		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TIOCSLCKTRMIOS:
 		if (!capable(CAP_SYS_ADMIN))
-			ret = -EPERM;
-		mutex_lock(&real_tty->termios_mutex);
-		if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
+			return -EPERM;
+		copy_termios_locked(real_tty, &kterm);
+		if (user_termios_to_kernel_termios_1(&kterm,
 					       (struct termios __user *) arg))
-			ret = -EFAULT;
+			return -EFAULT;
+		mutex_lock(&real_tty->termios_mutex);
+		memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
 		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 #endif
@@ -1023,9 +1053,10 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		if (real_tty->termiox == NULL)
 			return -EINVAL;
 		mutex_lock(&real_tty->termios_mutex);
-		if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
-			ret = -EFAULT;
+		memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox));
 		mutex_unlock(&real_tty->termios_mutex);
+		if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
+			ret = -EFAULT;
 		return ret;
 	case TCSETX:
 		return set_termiox(real_tty, p, 0);
@@ -1035,10 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return set_termiox(real_tty, p, TERMIOS_FLUSH);
 #endif		
 	case TIOCGSOFTCAR:
-		mutex_lock(&real_tty->termios_mutex);
-		ret = put_user(C_CLOCAL(real_tty) ? 1 : 0,
+		copy_termios(real_tty, &kterm);
+		ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0,
 						(int __user *)arg);
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TIOCSSOFTCAR:
 		if (get_user(arg, (unsigned int __user *) arg))
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index f78f5b0127a..39c8f86dedd 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -115,19 +115,22 @@ EXPORT_SYMBOL(tty_unregister_ldisc);
 /**
  *	tty_ldisc_try_get	-	try and reference an ldisc
  *	@disc: ldisc number
- *	@ld: tty ldisc structure to complete
  *
  *	Attempt to open and lock a line discipline into place. Return
- *	the line discipline refcounted and assigned in ld. On an error
- *	report the error code back
+ *	the line discipline refcounted or an error.
  */
 
-static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
+static struct tty_ldisc *tty_ldisc_try_get(int disc)
 {
 	unsigned long flags;
+	struct tty_ldisc *ld;
 	struct tty_ldisc_ops *ldops;
 	int err = -EINVAL;
-	
+
+	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
+	if (ld == NULL)
+		return ERR_PTR(-ENOMEM);
+
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
 	ld->ops = NULL;
 	ldops = tty_ldiscs[disc];
@@ -140,17 +143,19 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
 			/* lock it */
 			ldops->refcount++;
 			ld->ops = ldops;
+			ld->refcount = 0;
 			err = 0;
 		}
 	}
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	return err;
+	if (err)
+		return ERR_PTR(err);
+	return ld;
 }
 
 /**
  *	tty_ldisc_get		-	take a reference to an ldisc
  *	@disc: ldisc number
- *	@ld: tty line discipline structure to use
  *
  *	Takes a reference to a line discipline. Deals with refcounts and
  *	module locking counts. Returns NULL if the discipline is not available.
@@ -161,52 +166,54 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
  *		takes tty_ldisc_lock to guard against ldisc races
  */
 
-static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
+static struct tty_ldisc *tty_ldisc_get(int disc)
 {
-	int err;
+	struct tty_ldisc *ld;
 
 	if (disc < N_TTY || disc >= NR_LDISCS)
-		return -EINVAL;
-	err = tty_ldisc_try_get(disc, ld);
-	if (err < 0) {
+		return ERR_PTR(-EINVAL);
+	ld = tty_ldisc_try_get(disc);
+	if (IS_ERR(ld)) {
 		request_module("tty-ldisc-%d", disc);
-		err = tty_ldisc_try_get(disc, ld);
+		ld = tty_ldisc_try_get(disc);
 	}
-	return err;
+	return ld;
 }
 
 /**
  *	tty_ldisc_put		-	drop ldisc reference
- *	@disc: ldisc number
+ *	@ld: ldisc
  *
  *	Drop a reference to a line discipline. Manage refcounts and
- *	module usage counts
+ *	module usage counts. Free the ldisc once the recount hits zero.
  *
  *	Locking:
  *		takes tty_ldisc_lock to guard against ldisc races
  */
 
-static void tty_ldisc_put(struct tty_ldisc_ops *ld)
+static void tty_ldisc_put(struct tty_ldisc *ld)
 {
 	unsigned long flags;
-	int disc = ld->num;
+	int disc = ld->ops->num;
+	struct tty_ldisc_ops *ldo;
 
 	BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
 
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = tty_ldiscs[disc];
-	BUG_ON(ld->refcount == 0);
-	ld->refcount--;
-	module_put(ld->owner);
+	ldo = tty_ldiscs[disc];
+	BUG_ON(ldo->refcount == 0);
+	ldo->refcount--;
+	module_put(ldo->owner);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	kfree(ld);
 }
 
-static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
+static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
 {
 	return (*pos < NR_LDISCS) ? pos : NULL;
 }
 
-static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
+static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	(*pos)++;
 	return (*pos < NR_LDISCS) ? pos : NULL;
@@ -219,12 +226,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
 static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
 {
 	int i = *(loff_t *)v;
-	struct tty_ldisc ld;
-	
-	if (tty_ldisc_get(i, &ld) < 0)
+	struct tty_ldisc *ld;
+
+	ld = tty_ldisc_try_get(i);
+	if (IS_ERR(ld))
 		return 0;
-	seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
-	tty_ldisc_put(ld.ops);
+	seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
+	tty_ldisc_put(ld);
 	return 0;
 }
 
@@ -263,8 +271,7 @@ const struct file_operations tty_ldiscs_proc_fops = {
 
 static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
 {
-	ld->refcount = 0;
-	tty->ldisc = *ld;
+	tty->ldisc = ld;
 }
 
 /**
@@ -286,7 +293,7 @@ static int tty_ldisc_try(struct tty_struct *tty)
 	int ret = 0;
 
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = &tty->ldisc;
+	ld = tty->ldisc;
 	if (test_bit(TTY_LDISC, &tty->flags)) {
 		ld->refcount++;
 		ret = 1;
@@ -315,10 +322,9 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
 {
 	/* wait_event is a macro */
 	wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
-	WARN_ON(tty->ldisc.refcount == 0);
-	return &tty->ldisc;
+	WARN_ON(tty->ldisc->refcount == 0);
+	return tty->ldisc;
 }
-
 EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 
 /**
@@ -335,10 +341,9 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
 {
 	if (tty_ldisc_try(tty))
-		return &tty->ldisc;
+		return tty->ldisc;
 	return NULL;
 }
-
 EXPORT_SYMBOL_GPL(tty_ldisc_ref);
 
 /**
@@ -366,7 +371,6 @@ void tty_ldisc_deref(struct tty_ldisc *ld)
 		wake_up(&tty_ldisc_wait);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 }
-
 EXPORT_SYMBOL_GPL(tty_ldisc_deref);
 
 /**
@@ -389,6 +393,26 @@ void tty_ldisc_enable(struct tty_struct *tty)
 }
 
 /**
+ *	tty_ldisc_flush	-	flush line discipline queue
+ *	@tty: tty
+ *
+ *	Flush the line discipline queue (if any) for this tty. If there
+ *	is no line discipline active this is a no-op.
+ */
+
+void tty_ldisc_flush(struct tty_struct *tty)
+{
+	struct tty_ldisc *ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->ops->flush_buffer)
+			ld->ops->flush_buffer(tty);
+		tty_ldisc_deref(ld);
+	}
+	tty_buffer_flush(tty);
+}
+EXPORT_SYMBOL_GPL(tty_ldisc_flush);
+
+/**
  *	tty_set_termios_ldisc		-	set ldisc field
  *	@tty: tty structure
  *	@num: line discipline number
@@ -407,6 +431,39 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
 	mutex_unlock(&tty->termios_mutex);
 }
 
+/**
+ *	tty_ldisc_open		-	open a line discipline
+ *	@tty: tty we are opening the ldisc on
+ *	@ld: discipline to open
+ *
+ *	A helper opening method. Also a convenient debugging and check
+ *	point.
+ */
+
+static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
+	if (ld->ops->open)
+		return ld->ops->open(tty);
+	return 0;
+}
+
+/**
+ *	tty_ldisc_close		-	close a line discipline
+ *	@tty: tty we are opening the ldisc on
+ *	@ld: discipline to close
+ *
+ *	A helper close method. Also a convenient debugging and check
+ *	point.
+ */
+
+static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+	WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags));
+	clear_bit(TTY_LDISC_OPEN, &tty->flags);
+	if (ld->ops->close)
+		ld->ops->close(tty);
+}
 
 /**
  *	tty_ldisc_restore	-	helper for tty ldisc change
@@ -420,66 +477,136 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
 static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 {
 	char buf[64];
-	struct tty_ldisc new_ldisc;
+	struct tty_ldisc *new_ldisc;
+	int r;
 
 	/* There is an outstanding reference here so this is safe */
-	tty_ldisc_get(old->ops->num, old);
+	old = tty_ldisc_get(old->ops->num);
+	WARN_ON(IS_ERR(old));
 	tty_ldisc_assign(tty, old);
 	tty_set_termios_ldisc(tty, old->ops->num);
-	if (old->ops->open && (old->ops->open(tty) < 0)) {
-		tty_ldisc_put(old->ops);
+	if (tty_ldisc_open(tty, old) < 0) {
+		tty_ldisc_put(old);
 		/* This driver is always present */
-		if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
+		new_ldisc = tty_ldisc_get(N_TTY);
+		if (IS_ERR(new_ldisc))
 			panic("n_tty: get");
-		tty_ldisc_assign(tty, &new_ldisc);
+		tty_ldisc_assign(tty, new_ldisc);
 		tty_set_termios_ldisc(tty, N_TTY);
-		if (new_ldisc.ops->open) {
-			int r = new_ldisc.ops->open(tty);
-				if (r < 0)
-				panic("Couldn't open N_TTY ldisc for "
-				      "%s --- error %d.",
-				      tty_name(tty, buf), r);
-		}
+		r = tty_ldisc_open(tty, new_ldisc);
+		if (r < 0)
+			panic("Couldn't open N_TTY ldisc for "
+			      "%s --- error %d.",
+			      tty_name(tty, buf), r);
 	}
 }
 
 /**
+ *	tty_ldisc_halt		-	shut down the line discipline
+ *	@tty: tty device
+ *
+ *	Shut down the line discipline and work queue for this tty device.
+ *	The TTY_LDISC flag being cleared ensures no further references can
+ *	be obtained while the delayed work queue halt ensures that no more
+ *	data is fed to the ldisc.
+ *
+ *	In order to wait for any existing references to complete see
+ *	tty_ldisc_wait_idle.
+ */
+
+static int tty_ldisc_halt(struct tty_struct *tty)
+{
+	clear_bit(TTY_LDISC, &tty->flags);
+	return cancel_delayed_work(&tty->buf.work);
+}
+
+/**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ *
+ *	tty_ldisc_lock protects the ref counts currently.
+ */
+
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	while (tty->ldisc->refcount) {
+		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+		if (wait_event_timeout(tty_ldisc_wait,
+				tty->ldisc->refcount == 0, 5 * HZ) == 0)
+			return -EBUSY;
+		spin_lock_irqsave(&tty_ldisc_lock, flags);
+	}
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	return 0;
+}
+
+/**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
  *	@ldisc: the line discipline
  *
  *	Set the discipline of a tty line. Must be called from a process
- *	context.
+ *	context. The ldisc change logic has to protect itself against any
+ *	overlapping ldisc change (including on the other end of pty pairs),
+ *	the close of one side of a tty/pty pair, and eventually hangup.
  *
- *	Locking: takes tty_ldisc_lock.
- *		 called functions take termios_mutex
+ *	Locking: takes tty_ldisc_lock, termios_mutex
  */
 
 int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 {
 	int retval;
-	struct tty_ldisc o_ldisc, new_ldisc;
-	int work;
-	unsigned long flags;
+	struct tty_ldisc *o_ldisc, *new_ldisc;
+	int work, o_work = 0;
 	struct tty_struct *o_tty;
 
-restart:
-	/* This is a bit ugly for now but means we can break the 'ldisc
-	   is part of the tty struct' assumption later */
-	retval = tty_ldisc_get(ldisc, &new_ldisc);
-	if (retval)
-		return retval;
+	new_ldisc = tty_ldisc_get(ldisc);
+	if (IS_ERR(new_ldisc))
+		return PTR_ERR(new_ldisc);
+
+	/*
+	 *	We need to look at the tty locking here for pty/tty pairs
+	 *	when both sides try to change in parallel.
+	 */
+
+	o_tty = tty->link;	/* o_tty is the pty side or NULL */
+
+
+	/*
+	 *	Check the no-op case
+	 */
+
+	if (tty->ldisc->ops->num == ldisc) {
+		tty_ldisc_put(new_ldisc);
+		return 0;
+	}
 
 	/*
 	 *	Problem: What do we do if this blocks ?
+	 *	We could deadlock here
 	 */
 
 	tty_wait_until_sent(tty, 0);
 
-	if (tty->ldisc.ops->num == ldisc) {
-		tty_ldisc_put(new_ldisc.ops);
-		return 0;
+	mutex_lock(&tty->ldisc_mutex);
+
+	/*
+	 *	We could be midstream of another ldisc change which has
+	 *	dropped the lock during processing. If so we need to wait.
+	 */
+
+	while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
+		mutex_unlock(&tty->ldisc_mutex);
+		wait_event(tty_ldisc_wait,
+			test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
+		mutex_lock(&tty->ldisc_mutex);
 	}
+	set_bit(TTY_LDISC_CHANGING, &tty->flags);
 
 	/*
 	 *	No more input please, we are switching. The new ldisc
@@ -489,8 +616,6 @@ restart:
 	tty->receive_room = 0;
 
 	o_ldisc = tty->ldisc;
-	o_tty = tty->link;
-
 	/*
 	 *	Make sure we don't change while someone holds a
 	 *	reference to the line discipline. The TTY_LDISC bit
@@ -501,108 +626,181 @@ restart:
 	 *	with a userspace app continually trying to use the tty in
 	 *	parallel to the change and re-referencing the tty.
 	 */
-	clear_bit(TTY_LDISC, &tty->flags);
-	if (o_tty)
-		clear_bit(TTY_LDISC, &o_tty->flags);
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
-		if (tty->ldisc.refcount) {
-			/* Free the new ldisc we grabbed. Must drop the lock
-			   first. */
-			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-			tty_ldisc_put(o_ldisc.ops);
-			/*
-			 * There are several reasons we may be busy, including
-			 * random momentary I/O traffic. We must therefore
-			 * retry. We could distinguish between blocking ops
-			 * and retries if we made tty_ldisc_wait() smarter.
-			 * That is up for discussion.
-			 */
-			if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
-				return -ERESTARTSYS;
-			goto restart;
-		}
-		if (o_tty && o_tty->ldisc.refcount) {
-			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-			tty_ldisc_put(o_tty->ldisc.ops);
-			if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
-				return -ERESTARTSYS;
-			goto restart;
-		}
-	}
-	/*
-	 *	If the TTY_LDISC bit is set, then we are racing against
-	 *	another ldisc change
-	 */
-	if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
-		struct tty_ldisc *ld;
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		tty_ldisc_put(new_ldisc.ops);
-		ld = tty_ldisc_ref_wait(tty);
-		tty_ldisc_deref(ld);
-		goto restart;
-	}
-	/*
-	 *	This flag is used to avoid two parallel ldisc changes. Once
-	 *	open and close are fine grained locked this may work better
-	 *	as a mutex shared with the open/close/hup paths
-	 */
-	set_bit(TTY_LDISC_CHANGING, &tty->flags);
+	work = tty_ldisc_halt(tty);
 	if (o_tty)
-		set_bit(TTY_LDISC_CHANGING, &o_tty->flags);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	
-	/*
-	 *	From this point on we know nobody has an ldisc
-	 *	usage reference, nor can they obtain one until
-	 *	we say so later on.
-	 */
+		o_work = tty_ldisc_halt(o_tty);
 
-	work = cancel_delayed_work(&tty->buf.work);
 	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate
-	 * MUST NOT hold locks here.
+	 * Wait for ->hangup_work and ->buf.work handlers to terminate.
+	 * We must drop the mutex here in case a hangup is also in process.
 	 */
+
+	mutex_unlock(&tty->ldisc_mutex);
+
 	flush_scheduled_work();
+
+	/* Let any existing reference holders finish */
+	retval = tty_ldisc_wait_idle(tty);
+	if (retval < 0) {
+		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
+		tty_ldisc_put(new_ldisc);
+		return retval;
+	}
+
+	mutex_lock(&tty->ldisc_mutex);
+	if (test_bit(TTY_HUPPED, &tty->flags)) {
+		/* We were raced by the hangup method. It will have stomped
+		   the ldisc data and closed the ldisc down */
+		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
+		mutex_unlock(&tty->ldisc_mutex);
+		tty_ldisc_put(new_ldisc);
+		return -EIO;
+	}
+
 	/* Shutdown the current discipline. */
-	if (o_ldisc.ops->close)
-		(o_ldisc.ops->close)(tty);
+	tty_ldisc_close(tty, o_ldisc);
 
 	/* Now set up the new line discipline. */
-	tty_ldisc_assign(tty, &new_ldisc);
+	tty_ldisc_assign(tty, new_ldisc);
 	tty_set_termios_ldisc(tty, ldisc);
-	if (new_ldisc.ops->open)
-		retval = (new_ldisc.ops->open)(tty);
+
+	retval = tty_ldisc_open(tty, new_ldisc);
 	if (retval < 0) {
-		tty_ldisc_put(new_ldisc.ops);
-		tty_ldisc_restore(tty, &o_ldisc);
+		/* Back to the old one or N_TTY if we can't */
+		tty_ldisc_put(new_ldisc);
+		tty_ldisc_restore(tty, o_ldisc);
 	}
+
 	/* At this point we hold a reference to the new ldisc and a
 	   a reference to the old ldisc. If we ended up flipping back
 	   to the existing ldisc we have two references to it */
 
-	if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
+	if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
 		tty->ops->set_ldisc(tty);
 
-	tty_ldisc_put(o_ldisc.ops);
+	tty_ldisc_put(o_ldisc);
 
 	/*
-	 *	Allow ldisc referencing to occur as soon as the driver
-	 *	ldisc callback completes.
+	 *	Allow ldisc referencing to occur again
 	 */
 
 	tty_ldisc_enable(tty);
 	if (o_tty)
 		tty_ldisc_enable(o_tty);
 
-	/* Restart it in case no characters kick it off. Safe if
+	/* Restart the work queue in case no characters kick it off. Safe if
 	   already running */
 	if (work)
 		schedule_delayed_work(&tty->buf.work, 1);
+	if (o_work)
+		schedule_delayed_work(&o_tty->buf.work, 1);
+	mutex_unlock(&tty->ldisc_mutex);
 	return retval;
 }
 
+/**
+ *	tty_reset_termios	-	reset terminal state
+ *	@tty: tty to reset
+ *
+ *	Restore a terminal to the driver default state.
+ */
+
+static void tty_reset_termios(struct tty_struct *tty)
+{
+	mutex_lock(&tty->termios_mutex);
+	*tty->termios = tty->driver->init_termios;
+	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+	mutex_unlock(&tty->termios_mutex);
+}
+
+
+/**
+ *	tty_ldisc_reinit	-	reinitialise the tty ldisc
+ *	@tty: tty to reinit
+ *
+ *	Switch the tty back to N_TTY line discipline and leave the
+ *	ldisc state closed
+ */
+
+static void tty_ldisc_reinit(struct tty_struct *tty)
+{
+	struct tty_ldisc *ld;
+
+	tty_ldisc_close(tty, tty->ldisc);
+	tty_ldisc_put(tty->ldisc);
+	tty->ldisc = NULL;
+	/*
+	 *	Switch the line discipline back
+	 */
+	ld = tty_ldisc_get(N_TTY);
+	BUG_ON(IS_ERR(ld));
+	tty_ldisc_assign(tty, ld);
+	tty_set_termios_ldisc(tty, N_TTY);
+}
+
+/**
+ *	tty_ldisc_hangup		-	hangup ldisc reset
+ *	@tty: tty being hung up
+ *
+ *	Some tty devices reset their termios when they receive a hangup
+ *	event. In that situation we must also switch back to N_TTY properly
+ *	before we reset the termios data.
+ *
+ *	Locking: We can take the ldisc mutex as the rest of the code is
+ *	careful to allow for this.
+ *
+ *	In the pty pair case this occurs in the close() path of the
+ *	tty itself so we must be careful about locking rules.
+ */
+
+void tty_ldisc_hangup(struct tty_struct *tty)
+{
+	struct tty_ldisc *ld;
+
+	/*
+	 * FIXME! What are the locking issues here? This may me overdoing
+	 * things... This question is especially important now that we've
+	 * removed the irqlock.
+	 */
+	ld = tty_ldisc_ref(tty);
+	if (ld != NULL) {
+		/* We may have no line discipline at this point */
+		if (ld->ops->flush_buffer)
+			ld->ops->flush_buffer(tty);
+		tty_driver_flush_buffer(tty);
+		if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
+		    ld->ops->write_wakeup)
+			ld->ops->write_wakeup(tty);
+		if (ld->ops->hangup)
+			ld->ops->hangup(tty);
+		tty_ldisc_deref(ld);
+	}
+	/*
+	 * FIXME: Once we trust the LDISC code better we can wait here for
+	 * ldisc completion and fix the driver call race
+	 */
+	wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
+	wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+	/*
+	 * Shutdown the current line discipline, and reset it to
+	 * N_TTY.
+	 */
+	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+		/* Avoid racing set_ldisc */
+		mutex_lock(&tty->ldisc_mutex);
+		/* Switch back to N_TTY */
+		tty_ldisc_reinit(tty);
+		/* At this point we have a closed ldisc and we want to
+		   reopen it. We could defer this to the next open but
+		   it means auditing a lot of other paths so this is a FIXME */
+		WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+		tty_ldisc_enable(tty);
+		mutex_unlock(&tty->ldisc_mutex);
+		tty_reset_termios(tty);
+	}
+}
 
 /**
  *	tty_ldisc_setup			-	open line discipline
@@ -610,24 +808,23 @@ restart:
  *	@o_tty: pair tty for pty/tty pairs
  *
  *	Called during the initial open of a tty/pty pair in order to set up the
- *	line discplines and bind them to the tty.
+ *	line disciplines and bind them to the tty. This has no locking issues
+ *	as the device isn't yet active.
  */
 
 int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 {
-	struct tty_ldisc *ld = &tty->ldisc;
+	struct tty_ldisc *ld = tty->ldisc;
 	int retval;
 
-	if (ld->ops->open) {
-		retval = (ld->ops->open)(tty);
-		if (retval)
-			return retval;
-	}
-	if (o_tty && o_tty->ldisc.ops->open) {
-		retval = (o_tty->ldisc.ops->open)(o_tty);
+	retval = tty_ldisc_open(tty, ld);
+	if (retval)
+		return retval;
+
+	if (o_tty) {
+		retval = tty_ldisc_open(o_tty, o_tty->ldisc);
 		if (retval) {
-			if (ld->ops->close)
-				(ld->ops->close)(tty);
+			tty_ldisc_close(tty, ld);
 			return retval;
 		}
 		tty_ldisc_enable(o_tty);
@@ -635,32 +832,25 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 	tty_ldisc_enable(tty);
 	return 0;
 }
-
 /**
  *	tty_ldisc_release		-	release line discipline
  *	@tty: tty being shut down
  *	@o_tty: pair tty for pty/tty pairs
  *
- *	Called during the final close of a tty/pty pair in order to shut down the
- *	line discpline layer.
+ *	Called during the final close of a tty/pty pair in order to shut down
+ *	the line discpline layer. On exit the ldisc assigned is N_TTY and the
+ *	ldisc has not been opened.
  */
 
 void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 {
-	unsigned long flags;
-	struct tty_ldisc ld;
 	/*
 	 * Prevent flush_to_ldisc() from rescheduling the work for later.  Then
 	 * kill any delayed work. As this is the final close it does not
 	 * race with the set_ldisc code path.
 	 */
-	clear_bit(TTY_LDISC, &tty->flags);
-	cancel_delayed_work(&tty->buf.work);
-
-	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate
-	 */
 
+	tty_ldisc_halt(tty);
 	flush_scheduled_work();
 
 	/*
@@ -668,38 +858,19 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 	 * side waiters as the file is closing so user count on the file
 	 * side is zero.
 	 */
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	while (tty->ldisc.refcount) {
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
-		spin_lock_irqsave(&tty_ldisc_lock, flags);
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+	tty_ldisc_wait_idle(tty);
+
 	/*
 	 * Shutdown the current line discipline, and reset it to N_TTY.
 	 *
 	 * FIXME: this MUST get fixed for the new reflocking
 	 */
-	if (tty->ldisc.ops->close)
-		(tty->ldisc.ops->close)(tty);
-	tty_ldisc_put(tty->ldisc.ops);
 
-	/*
-	 *	Switch the line discipline back
-	 */
-	WARN_ON(tty_ldisc_get(N_TTY, &ld));
-	tty_ldisc_assign(tty, &ld);
-	tty_set_termios_ldisc(tty, N_TTY);
-	if (o_tty) {
-		/* FIXME: could o_tty be in setldisc here ? */
-		clear_bit(TTY_LDISC, &o_tty->flags);
-		if (o_tty->ldisc.ops->close)
-			(o_tty->ldisc.ops->close)(o_tty);
-		tty_ldisc_put(o_tty->ldisc.ops);
-		WARN_ON(tty_ldisc_get(N_TTY, &ld));
-		tty_ldisc_assign(o_tty, &ld);
-		tty_set_termios_ldisc(o_tty, N_TTY);
-	}
+	tty_ldisc_reinit(tty);
+	/* This will need doing differently if we need to lock */
+	if (o_tty)
+		tty_ldisc_release(o_tty, NULL);
 }
 
 /**
@@ -712,10 +883,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 
 void tty_ldisc_init(struct tty_struct *tty)
 {
-	struct tty_ldisc ld;
-	if (tty_ldisc_get(N_TTY, &ld) < 0)
+	struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
+	if (IS_ERR(ld))
 		panic("n_tty: init_tty");
-	tty_ldisc_assign(tty, &ld);
+	tty_ldisc_assign(tty, ld);
 }
 
 void tty_ldisc_begin(void)
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 9b8004c7268..62dadfc95e3 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -137,7 +137,7 @@ int tty_port_carrier_raised(struct tty_port *port)
 EXPORT_SYMBOL(tty_port_carrier_raised);
 
 /**
- *	tty_port_raise_dtr_rts	-	Riase DTR/RTS
+ *	tty_port_raise_dtr_rts	-	Raise DTR/RTS
  *	@port: tty port
  *
  *	Wrapper for the DTR/RTS raise logic. For the moment this is used
@@ -147,12 +147,28 @@ EXPORT_SYMBOL(tty_port_carrier_raised);
 
 void tty_port_raise_dtr_rts(struct tty_port *port)
 {
-	if (port->ops->raise_dtr_rts)
-		port->ops->raise_dtr_rts(port);
+	if (port->ops->dtr_rts)
+		port->ops->dtr_rts(port, 1);
 }
 EXPORT_SYMBOL(tty_port_raise_dtr_rts);
 
 /**
+ *	tty_port_lower_dtr_rts	-	Lower DTR/RTS
+ *	@port: tty port
+ *
+ *	Wrapper for the DTR/RTS raise logic. For the moment this is used
+ *	to hide some internal details. This will eventually become entirely
+ *	internal to the tty port.
+ */
+
+void tty_port_lower_dtr_rts(struct tty_port *port)
+{
+	if (port->ops->dtr_rts)
+		port->ops->dtr_rts(port, 0);
+}
+EXPORT_SYMBOL(tty_port_lower_dtr_rts);
+
+/**
  *	tty_port_block_til_ready	-	Waiting logic for tty open
  *	@port: the tty port being opened
  *	@tty: the tty device being bound
@@ -167,7 +183,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts);
  *		- port flags and counts
  *
  *	The passed tty_port must implement the carrier_raised method if it can
- *	do carrier detect and the raise_dtr_rts method if it supports software
+ *	do carrier detect and the dtr_rts method if it supports software
  *	management of these lines. Note that the dtr/rts raise is done each
  *	iteration as a hangup may have previously dropped them while we wait.
  */
@@ -182,7 +198,8 @@ int tty_port_block_til_ready(struct tty_port *port,
 
 	/* block if port is in the process of being closed */
 	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-		interruptible_sleep_on(&port->close_wait);
+		wait_event_interruptible(port->close_wait,
+				!(port->flags & ASYNC_CLOSING));
 		if (port->flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
 		else
@@ -205,7 +222,6 @@ int tty_port_block_til_ready(struct tty_port *port,
 	   before the next open may complete */
 
 	retval = 0;
-	add_wait_queue(&port->open_wait, &wait);
 
 	/* The port lock protects the port counts */
 	spin_lock_irqsave(&port->lock, flags);
@@ -219,7 +235,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 		if (tty->termios->c_cflag & CBAUD)
 			tty_port_raise_dtr_rts(port);
 
-		set_current_state(TASK_INTERRUPTIBLE);
+		prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
 		/* Check for a hangup or uninitialised port. Return accordingly */
 		if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
 			if (port->flags & ASYNC_HUP_NOTIFY)
@@ -240,8 +256,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 		}
 		schedule();
 	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->open_wait, &wait);
+	finish_wait(&port->open_wait, &wait);
 
 	/* Update counts. A parallel hangup will have set count to zero and
 	   we must not mess that up further */
@@ -292,6 +307,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
 	if (port->flags & ASYNC_INITIALIZED &&
 			port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, port->closing_wait);
+	if (port->drain_delay) {
+		unsigned int bps = tty_get_baud_rate(tty);
+		long timeout;
+
+		if (bps > 1200)
+			timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps,
+								HZ / 10);
+		else
+			timeout = 2 * HZ;
+		schedule_timeout_interruptible(timeout);
+	}
 	return 1;
 }
 EXPORT_SYMBOL(tty_port_close_start);
@@ -302,6 +328,9 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
 
 	tty_ldisc_flush(tty);
 
+	if (tty->termios->c_cflag & HUPCL)
+		tty_port_lower_dtr_rts(port);
+
 	spin_lock_irqsave(&port->lock, flags);
 	tty->closing = 0;
 
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index ff6f5a4b58f..c74dacfa679 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -188,6 +188,9 @@ static void hvc_handle_input(struct virtqueue *vq)
  * Finally we put our input buffer in the input queue, ready to receive. */
 static int __devinit virtcons_probe(struct virtio_device *dev)
 {
+	vq_callback_t *callbacks[] = { hvc_handle_input, NULL};
+	const char *names[] = { "input", "output" };
+	struct virtqueue *vqs[2];
 	int err;
 
 	vdev = dev;
@@ -199,20 +202,15 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 		goto fail;
 	}
 
-	/* Find the input queue. */
+	/* Find the queues. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, 0, hvc_handle_input);
-	if (IS_ERR(in_vq)) {
-		err = PTR_ERR(in_vq);
+	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	if (err)
 		goto free;
-	}
 
-	out_vq = vdev->config->find_vq(vdev, 1, NULL);
-	if (IS_ERR(out_vq)) {
-		err = PTR_ERR(out_vq);
-		goto free_in_vq;
-	}
+	in_vq = vqs[0];
+	out_vq = vqs[1];
 
 	/* Start using the new console output. */
 	virtio_cons.get_chars = get_chars;
@@ -233,17 +231,15 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
 	if (IS_ERR(hvc)) {
 		err = PTR_ERR(hvc);
-		goto free_out_vq;
+		goto free_vqs;
 	}
 
 	/* Register the input buffer the first time. */
 	add_inbuf();
 	return 0;
 
-free_out_vq:
-	vdev->config->del_vq(out_vq);
-free_in_vq:
-	vdev->config->del_vq(in_vq);
+free_vqs:
+	vdev->config->del_vqs(vdev);
 free:
 	kfree(inbuf);
 fail:
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 08151d4de48..c796a86ab7f 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -95,7 +95,6 @@
 #include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
-#include <linux/bootmem.h>
 #include <linux/pm.h>
 #include <linux/font.h>
 #include <linux/bitops.h>
@@ -2875,14 +2874,11 @@ static int __init con_init(void)
 		mod_timer(&console_timer, jiffies + blankinterval);
 	}
 
-	/*
-	 * kmalloc is not running yet - we use the bootmem allocator.
-	 */
 	for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) {
-		vc_cons[currcons].d = vc = alloc_bootmem(sizeof(struct vc_data));
+		vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT);
 		INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
 		visual_init(vc, currcons, 1);
-		vc->vc_screenbuf = (unsigned short *)alloc_bootmem(vc->vc_screenbuf_size);
+		vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
 		vc->vc_kmalloced = 0;
 		vc_init(vc, vc->vc_rows, vc->vc_cols,
 			currcons || !vc->vc_sw->con_save_screen);
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1efb2879a94..eef216f7f61 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o
 obj-$(CONFIG_SH_TIMER_CMT)	+= sh_cmt.o
+obj-$(CONFIG_SH_TIMER_MTU2)	+= sh_mtu2.o
+obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 1c92c39a53a..cf56a2af5fe 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -18,7 +18,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/bootmem.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
@@ -29,7 +28,7 @@
 #include <linux/err.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
 
 struct sh_cmt_priv {
 	void __iomem *mapbase;
@@ -47,6 +46,7 @@ struct sh_cmt_priv {
 	unsigned long rate;
 	spinlock_t lock;
 	struct clock_event_device ced;
+	struct clocksource cs;
 	unsigned long total_cycles;
 };
 
@@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(sh_cmt_lock);
 
 static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
 {
-	struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
 	void __iomem *base = p->mapbase;
 	unsigned long offs;
 
@@ -83,7 +83,7 @@ static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
 static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
 				unsigned long value)
 {
-	struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
 	void __iomem *base = p->mapbase;
 	unsigned long offs;
 
@@ -110,23 +110,28 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
 					int *has_wrapped)
 {
 	unsigned long v1, v2, v3;
+	int o1, o2;
+
+	o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
 
 	/* Make sure the timer value is stable. Stolen from acpi_pm.c */
 	do {
+		o2 = o1;
 		v1 = sh_cmt_read(p, CMCNT);
 		v2 = sh_cmt_read(p, CMCNT);
 		v3 = sh_cmt_read(p, CMCNT);
-	} while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
-			  || (v3 > v1 && v3 < v2)));
+		o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+	} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
+			  || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
-	*has_wrapped = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+	*has_wrapped = o1;
 	return v2;
 }
 
 
 static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
 {
-	struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
@@ -144,7 +149,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
 
 static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
 {
-	struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
 	int ret;
 
 	/* enable clock */
@@ -153,16 +158,18 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
 		pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk);
 		return ret;
 	}
-	*rate = clk_get_rate(p->clk) / 8;
 
 	/* make sure channel is disabled */
 	sh_cmt_start_stop_ch(p, 0);
 
 	/* configure channel, periodic mode and maximum timeout */
-	if (p->width == 16)
-		sh_cmt_write(p, CMCSR, 0);
-	else
+	if (p->width == 16) {
+		*rate = clk_get_rate(p->clk) / 512;
+		sh_cmt_write(p, CMCSR, 0x43);
+	} else {
+		*rate = clk_get_rate(p->clk) / 8;
 		sh_cmt_write(p, CMCSR, 0x01a4);
+	}
 
 	sh_cmt_write(p, CMCOR, 0xffffffff);
 	sh_cmt_write(p, CMCNT, 0);
@@ -376,6 +383,68 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
 	spin_unlock_irqrestore(&p->lock, flags);
 }
 
+static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
+{
+	return container_of(cs, struct sh_cmt_priv, cs);
+}
+
+static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
+{
+	struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
+	unsigned long flags, raw;
+	unsigned long value;
+	int has_wrapped;
+
+	spin_lock_irqsave(&p->lock, flags);
+	value = p->total_cycles;
+	raw = sh_cmt_get_counter(p, &has_wrapped);
+
+	if (unlikely(has_wrapped))
+		raw += p->match_value;
+	spin_unlock_irqrestore(&p->lock, flags);
+
+	return value + raw;
+}
+
+static int sh_cmt_clocksource_enable(struct clocksource *cs)
+{
+	struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
+	int ret;
+
+	p->total_cycles = 0;
+
+	ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
+	if (ret)
+		return ret;
+
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 0;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+	return 0;
+}
+
+static void sh_cmt_clocksource_disable(struct clocksource *cs)
+{
+	sh_cmt_stop(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE);
+}
+
+static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
+				       char *name, unsigned long rating)
+{
+	struct clocksource *cs = &p->cs;
+
+	cs->name = name;
+	cs->rating = rating;
+	cs->read = sh_cmt_clocksource_read;
+	cs->enable = sh_cmt_clocksource_enable;
+	cs->disable = sh_cmt_clocksource_disable;
+	cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	pr_info("sh_cmt: %s used as clock source\n", cs->name);
+	clocksource_register(cs);
+	return 0;
+}
+
 static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced)
 {
 	return container_of(ced, struct sh_cmt_priv, ced);
@@ -468,9 +537,9 @@ static void sh_cmt_register_clockevent(struct sh_cmt_priv *p,
 	clockevents_register_device(ced);
 }
 
-int sh_cmt_register(struct sh_cmt_priv *p, char *name,
-		    unsigned long clockevent_rating,
-		    unsigned long clocksource_rating)
+static int sh_cmt_register(struct sh_cmt_priv *p, char *name,
+			   unsigned long clockevent_rating,
+			   unsigned long clocksource_rating)
 {
 	if (p->width == (sizeof(p->max_match_value) * 8))
 		p->max_match_value = ~0;
@@ -483,12 +552,15 @@ int sh_cmt_register(struct sh_cmt_priv *p, char *name,
 	if (clockevent_rating)
 		sh_cmt_register_clockevent(p, name, clockevent_rating);
 
+	if (clocksource_rating)
+		sh_cmt_register_clocksource(p, name, clocksource_rating);
+
 	return 0;
 }
 
 static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 {
-	struct sh_cmt_config *cfg = pdev->dev.platform_data;
+	struct sh_timer_config *cfg = pdev->dev.platform_data;
 	struct resource *res;
 	int irq, ret;
 	ret = -ENXIO;
@@ -545,7 +617,7 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 	if (resource_size(res) == 6) {
 		p->width = 16;
 		p->overflow_bit = 0x80;
-		p->clear_bits = ~0xc0;
+		p->clear_bits = ~0x80;
 	} else {
 		p->width = 32;
 		p->overflow_bit = 0x8000;
@@ -566,8 +638,14 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 static int __devinit sh_cmt_probe(struct platform_device *pdev)
 {
 	struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+	struct sh_timer_config *cfg = pdev->dev.platform_data;
 	int ret;
 
+	if (p) {
+		pr_info("sh_cmt: %s kept as earlytimer\n", cfg->name);
+		return 0;
+	}
+
 	p = kmalloc(sizeof(*p), GFP_KERNEL);
 	if (p == NULL) {
 		dev_err(&pdev->dev, "failed to allocate driver data\n");
@@ -577,7 +655,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev)
 	ret = sh_cmt_setup(p, pdev);
 	if (ret) {
 		kfree(p);
-
 		platform_set_drvdata(pdev, NULL);
 	}
 	return ret;
@@ -606,6 +683,7 @@ static void __exit sh_cmt_exit(void)
 	platform_driver_unregister(&sh_cmt_device_driver);
 }
 
+early_platform_init("earlytimer", &sh_cmt_device_driver);
 module_init(sh_cmt_init);
 module_exit(sh_cmt_exit);
 
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
new file mode 100644
index 00000000000..d1ae75454d1
--- /dev/null
+++ b/drivers/clocksource/sh_mtu2.c
@@ -0,0 +1,357 @@
+/*
+ * SuperH Timer Support - MTU2
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clockchips.h>
+#include <linux/sh_timer.h>
+
+struct sh_mtu2_priv {
+	void __iomem *mapbase;
+	struct clk *clk;
+	struct irqaction irqaction;
+	struct platform_device *pdev;
+	unsigned long rate;
+	unsigned long periodic;
+	struct clock_event_device ced;
+};
+
+static DEFINE_SPINLOCK(sh_mtu2_lock);
+
+#define TSTR -1 /* shared register */
+#define TCR  0 /* channel register */
+#define TMDR 1 /* channel register */
+#define TIOR 2 /* channel register */
+#define TIER 3 /* channel register */
+#define TSR  4 /* channel register */
+#define TCNT 5 /* channel register */
+#define TGR  6 /* channel register */
+
+static unsigned long mtu2_reg_offs[] = {
+	[TCR] = 0,
+	[TMDR] = 1,
+	[TIOR] = 2,
+	[TIER] = 4,
+	[TSR] = 5,
+	[TCNT] = 6,
+	[TGR] = 8,
+};
+
+static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	void __iomem *base = p->mapbase;
+	unsigned long offs;
+
+	if (reg_nr == TSTR)
+		return ioread8(base + cfg->channel_offset);
+
+	offs = mtu2_reg_offs[reg_nr];
+
+	if ((reg_nr == TCNT) || (reg_nr == TGR))
+		return ioread16(base + offs);
+	else
+		return ioread8(base + offs);
+}
+
+static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr,
+				unsigned long value)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	void __iomem *base = p->mapbase;
+	unsigned long offs;
+
+	if (reg_nr == TSTR) {
+		iowrite8(value, base + cfg->channel_offset);
+		return;
+	}
+
+	offs = mtu2_reg_offs[reg_nr];
+
+	if ((reg_nr == TCNT) || (reg_nr == TGR))
+		iowrite16(value, base + offs);
+	else
+		iowrite8(value, base + offs);
+}
+
+static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	unsigned long flags, value;
+
+	/* start stop register shared by multiple timer channels */
+	spin_lock_irqsave(&sh_mtu2_lock, flags);
+	value = sh_mtu2_read(p, TSTR);
+
+	if (start)
+		value |= 1 << cfg->timer_bit;
+	else
+		value &= ~(1 << cfg->timer_bit);
+
+	sh_mtu2_write(p, TSTR, value);
+	spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+}
+
+static int sh_mtu2_enable(struct sh_mtu2_priv *p)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	int ret;
+
+	/* enable clock */
+	ret = clk_enable(p->clk);
+	if (ret) {
+		pr_err("sh_mtu2: cannot enable clock \"%s\"\n", cfg->clk);
+		return ret;
+	}
+
+	/* make sure channel is disabled */
+	sh_mtu2_start_stop_ch(p, 0);
+
+	p->rate = clk_get_rate(p->clk) / 64;
+	p->periodic = (p->rate + HZ/2) / HZ;
+
+	/* "Periodic Counter Operation" */
+	sh_mtu2_write(p, TCR, 0x23); /* TGRA clear, divide clock by 64 */
+	sh_mtu2_write(p, TIOR, 0);
+	sh_mtu2_write(p, TGR, p->periodic);
+	sh_mtu2_write(p, TCNT, 0);
+	sh_mtu2_write(p, TMDR, 0);
+	sh_mtu2_write(p, TIER, 0x01);
+
+	/* enable channel */
+	sh_mtu2_start_stop_ch(p, 1);
+
+	return 0;
+}
+
+static void sh_mtu2_disable(struct sh_mtu2_priv *p)
+{
+	/* disable channel */
+	sh_mtu2_start_stop_ch(p, 0);
+
+	/* stop clock */
+	clk_disable(p->clk);
+}
+
+static irqreturn_t sh_mtu2_interrupt(int irq, void *dev_id)
+{
+	struct sh_mtu2_priv *p = dev_id;
+
+	/* acknowledge interrupt */
+	sh_mtu2_read(p, TSR);
+	sh_mtu2_write(p, TSR, 0xfe);
+
+	/* notify clockevent layer */
+	p->ced.event_handler(&p->ced);
+	return IRQ_HANDLED;
+}
+
+static struct sh_mtu2_priv *ced_to_sh_mtu2(struct clock_event_device *ced)
+{
+	return container_of(ced, struct sh_mtu2_priv, ced);
+}
+
+static void sh_mtu2_clock_event_mode(enum clock_event_mode mode,
+				    struct clock_event_device *ced)
+{
+	struct sh_mtu2_priv *p = ced_to_sh_mtu2(ced);
+	int disabled = 0;
+
+	/* deal with old setting first */
+	switch (ced->mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		sh_mtu2_disable(p);
+		disabled = 1;
+		break;
+	default:
+		break;
+	}
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pr_info("sh_mtu2: %s used for periodic clock events\n",
+			ced->name);
+		sh_mtu2_enable(p);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+		if (!disabled)
+			sh_mtu2_disable(p);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		break;
+	}
+}
+
+static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p,
+				       char *name, unsigned long rating)
+{
+	struct clock_event_device *ced = &p->ced;
+	int ret;
+
+	memset(ced, 0, sizeof(*ced));
+
+	ced->name = name;
+	ced->features = CLOCK_EVT_FEAT_PERIODIC;
+	ced->rating = rating;
+	ced->cpumask = cpumask_of(0);
+	ced->set_mode = sh_mtu2_clock_event_mode;
+
+	ret = setup_irq(p->irqaction.irq, &p->irqaction);
+	if (ret) {
+		pr_err("sh_mtu2: failed to request irq %d\n",
+		       p->irqaction.irq);
+		return;
+	}
+
+	pr_info("sh_mtu2: %s used for clock events\n", ced->name);
+	clockevents_register_device(ced);
+}
+
+static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name,
+			    unsigned long clockevent_rating)
+{
+	if (clockevent_rating)
+		sh_mtu2_register_clockevent(p, name, clockevent_rating);
+
+	return 0;
+}
+
+static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev)
+{
+	struct sh_timer_config *cfg = pdev->dev.platform_data;
+	struct resource *res;
+	int irq, ret;
+	ret = -ENXIO;
+
+	memset(p, 0, sizeof(*p));
+	p->pdev = pdev;
+
+	if (!cfg) {
+		dev_err(&p->pdev->dev, "missing platform data\n");
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, p);
+
+	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+		goto err0;
+	}
+
+	irq = platform_get_irq(p->pdev, 0);
+	if (irq < 0) {
+		dev_err(&p->pdev->dev, "failed to get irq\n");
+		goto err0;
+	}
+
+	/* map memory, let mapbase point to our channel */
+	p->mapbase = ioremap_nocache(res->start, resource_size(res));
+	if (p->mapbase == NULL) {
+		pr_err("sh_mtu2: failed to remap I/O memory\n");
+		goto err0;
+	}
+
+	/* setup data for setup_irq() (too early for request_irq()) */
+	p->irqaction.name = cfg->name;
+	p->irqaction.handler = sh_mtu2_interrupt;
+	p->irqaction.dev_id = p;
+	p->irqaction.irq = irq;
+	p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
+	p->irqaction.mask = CPU_MASK_NONE;
+
+	/* get hold of clock */
+	p->clk = clk_get(&p->pdev->dev, cfg->clk);
+	if (IS_ERR(p->clk)) {
+		pr_err("sh_mtu2: cannot get clock \"%s\"\n", cfg->clk);
+		ret = PTR_ERR(p->clk);
+		goto err1;
+	}
+
+	return sh_mtu2_register(p, cfg->name, cfg->clockevent_rating);
+ err1:
+	iounmap(p->mapbase);
+ err0:
+	return ret;
+}
+
+static int __devinit sh_mtu2_probe(struct platform_device *pdev)
+{
+	struct sh_mtu2_priv *p = platform_get_drvdata(pdev);
+	struct sh_timer_config *cfg = pdev->dev.platform_data;
+	int ret;
+
+	if (p) {
+		pr_info("sh_mtu2: %s kept as earlytimer\n", cfg->name);
+		return 0;
+	}
+
+	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	ret = sh_mtu2_setup(p, pdev);
+	if (ret) {
+		kfree(p);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return ret;
+}
+
+static int __devexit sh_mtu2_remove(struct platform_device *pdev)
+{
+	return -EBUSY; /* cannot unregister clockevent */
+}
+
+static struct platform_driver sh_mtu2_device_driver = {
+	.probe		= sh_mtu2_probe,
+	.remove		= __devexit_p(sh_mtu2_remove),
+	.driver		= {
+		.name	= "sh_mtu2",
+	}
+};
+
+static int __init sh_mtu2_init(void)
+{
+	return platform_driver_register(&sh_mtu2_device_driver);
+}
+
+static void __exit sh_mtu2_exit(void)
+{
+	platform_driver_unregister(&sh_mtu2_device_driver);
+}
+
+early_platform_init("earlytimer", &sh_mtu2_device_driver);
+module_init(sh_mtu2_init);
+module_exit(sh_mtu2_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH MTU2 Timer Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
new file mode 100644
index 00000000000..d6ea4398bf6
--- /dev/null
+++ b/drivers/clocksource/sh_tmu.c
@@ -0,0 +1,461 @@
+/*
+ * SuperH Timer Support - TMU
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/sh_timer.h>
+
+struct sh_tmu_priv {
+	void __iomem *mapbase;
+	struct clk *clk;
+	struct irqaction irqaction;
+	struct platform_device *pdev;
+	unsigned long rate;
+	unsigned long periodic;
+	struct clock_event_device ced;
+	struct clocksource cs;
+};
+
+static DEFINE_SPINLOCK(sh_tmu_lock);
+
+#define TSTR -1 /* shared register */
+#define TCOR  0 /* channel register */
+#define TCNT 1 /* channel register */
+#define TCR 2 /* channel register */
+
+static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	void __iomem *base = p->mapbase;
+	unsigned long offs;
+
+	if (reg_nr == TSTR)
+		return ioread8(base - cfg->channel_offset);
+
+	offs = reg_nr << 2;
+
+	if (reg_nr == TCR)
+		return ioread16(base + offs);
+	else
+		return ioread32(base + offs);
+}
+
+static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr,
+				unsigned long value)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	void __iomem *base = p->mapbase;
+	unsigned long offs;
+
+	if (reg_nr == TSTR) {
+		iowrite8(value, base - cfg->channel_offset);
+		return;
+	}
+
+	offs = reg_nr << 2;
+
+	if (reg_nr == TCR)
+		iowrite16(value, base + offs);
+	else
+		iowrite32(value, base + offs);
+}
+
+static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	unsigned long flags, value;
+
+	/* start stop register shared by multiple timer channels */
+	spin_lock_irqsave(&sh_tmu_lock, flags);
+	value = sh_tmu_read(p, TSTR);
+
+	if (start)
+		value |= 1 << cfg->timer_bit;
+	else
+		value &= ~(1 << cfg->timer_bit);
+
+	sh_tmu_write(p, TSTR, value);
+	spin_unlock_irqrestore(&sh_tmu_lock, flags);
+}
+
+static int sh_tmu_enable(struct sh_tmu_priv *p)
+{
+	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+	int ret;
+
+	/* enable clock */
+	ret = clk_enable(p->clk);
+	if (ret) {
+		pr_err("sh_tmu: cannot enable clock \"%s\"\n", cfg->clk);
+		return ret;
+	}
+
+	/* make sure channel is disabled */
+	sh_tmu_start_stop_ch(p, 0);
+
+	/* maximum timeout */
+	sh_tmu_write(p, TCOR, 0xffffffff);
+	sh_tmu_write(p, TCNT, 0xffffffff);
+
+	/* configure channel to parent clock / 4, irq off */
+	p->rate = clk_get_rate(p->clk) / 4;
+	sh_tmu_write(p, TCR, 0x0000);
+
+	/* enable channel */
+	sh_tmu_start_stop_ch(p, 1);
+
+	return 0;
+}
+
+static void sh_tmu_disable(struct sh_tmu_priv *p)
+{
+	/* disable channel */
+	sh_tmu_start_stop_ch(p, 0);
+
+	/* stop clock */
+	clk_disable(p->clk);
+}
+
+static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta,
+			    int periodic)
+{
+	/* stop timer */
+	sh_tmu_start_stop_ch(p, 0);
+
+	/* acknowledge interrupt */
+	sh_tmu_read(p, TCR);
+
+	/* enable interrupt */
+	sh_tmu_write(p, TCR, 0x0020);
+
+	/* reload delta value in case of periodic timer */
+	if (periodic)
+		sh_tmu_write(p, TCOR, delta);
+	else
+		sh_tmu_write(p, TCOR, 0);
+
+	sh_tmu_write(p, TCNT, delta);
+
+	/* start timer */
+	sh_tmu_start_stop_ch(p, 1);
+}
+
+static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id)
+{
+	struct sh_tmu_priv *p = dev_id;
+
+	/* disable or acknowledge interrupt */
+	if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT)
+		sh_tmu_write(p, TCR, 0x0000);
+	else
+		sh_tmu_write(p, TCR, 0x0020);
+
+	/* notify clockevent layer */
+	p->ced.event_handler(&p->ced);
+	return IRQ_HANDLED;
+}
+
+static struct sh_tmu_priv *cs_to_sh_tmu(struct clocksource *cs)
+{
+	return container_of(cs, struct sh_tmu_priv, cs);
+}
+
+static cycle_t sh_tmu_clocksource_read(struct clocksource *cs)
+{
+	struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
+
+	return sh_tmu_read(p, TCNT) ^ 0xffffffff;
+}
+
+static int sh_tmu_clocksource_enable(struct clocksource *cs)
+{
+	struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
+	int ret;
+
+	ret = sh_tmu_enable(p);
+	if (ret)
+		return ret;
+
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 10;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+	return 0;
+}
+
+static void sh_tmu_clocksource_disable(struct clocksource *cs)
+{
+	sh_tmu_disable(cs_to_sh_tmu(cs));
+}
+
+static int sh_tmu_register_clocksource(struct sh_tmu_priv *p,
+				       char *name, unsigned long rating)
+{
+	struct clocksource *cs = &p->cs;
+
+	cs->name = name;
+	cs->rating = rating;
+	cs->read = sh_tmu_clocksource_read;
+	cs->enable = sh_tmu_clocksource_enable;
+	cs->disable = sh_tmu_clocksource_disable;
+	cs->mask = CLOCKSOURCE_MASK(32);
+	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	pr_info("sh_tmu: %s used as clock source\n", cs->name);
+	clocksource_register(cs);
+	return 0;
+}
+
+static struct sh_tmu_priv *ced_to_sh_tmu(struct clock_event_device *ced)
+{
+	return container_of(ced, struct sh_tmu_priv, ced);
+}
+
+static void sh_tmu_clock_event_start(struct sh_tmu_priv *p, int periodic)
+{
+	struct clock_event_device *ced = &p->ced;
+
+	sh_tmu_enable(p);
+
+	/* TODO: calculate good shift from rate and counter bit width */
+
+	ced->shift = 32;
+	ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
+	ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced);
+	ced->min_delta_ns = 5000;
+
+	if (periodic) {
+		p->periodic = (p->rate + HZ/2) / HZ;
+		sh_tmu_set_next(p, p->periodic, 1);
+	}
+}
+
+static void sh_tmu_clock_event_mode(enum clock_event_mode mode,
+				    struct clock_event_device *ced)
+{
+	struct sh_tmu_priv *p = ced_to_sh_tmu(ced);
+	int disabled = 0;
+
+	/* deal with old setting first */
+	switch (ced->mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+	case CLOCK_EVT_MODE_ONESHOT:
+		sh_tmu_disable(p);
+		disabled = 1;
+		break;
+	default:
+		break;
+	}
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pr_info("sh_tmu: %s used for periodic clock events\n",
+			ced->name);
+		sh_tmu_clock_event_start(p, 1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		pr_info("sh_tmu: %s used for oneshot clock events\n",
+			ced->name);
+		sh_tmu_clock_event_start(p, 0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+		if (!disabled)
+			sh_tmu_disable(p);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		break;
+	}
+}
+
+static int sh_tmu_clock_event_next(unsigned long delta,
+				   struct clock_event_device *ced)
+{
+	struct sh_tmu_priv *p = ced_to_sh_tmu(ced);
+
+	BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+
+	/* program new delta value */
+	sh_tmu_set_next(p, delta, 0);
+	return 0;
+}
+
+static void sh_tmu_register_clockevent(struct sh_tmu_priv *p,
+				       char *name, unsigned long rating)
+{
+	struct clock_event_device *ced = &p->ced;
+	int ret;
+
+	memset(ced, 0, sizeof(*ced));
+
+	ced->name = name;
+	ced->features = CLOCK_EVT_FEAT_PERIODIC;
+	ced->features |= CLOCK_EVT_FEAT_ONESHOT;
+	ced->rating = rating;
+	ced->cpumask = cpumask_of(0);
+	ced->set_next_event = sh_tmu_clock_event_next;
+	ced->set_mode = sh_tmu_clock_event_mode;
+
+	ret = setup_irq(p->irqaction.irq, &p->irqaction);
+	if (ret) {
+		pr_err("sh_tmu: failed to request irq %d\n",
+		       p->irqaction.irq);
+		return;
+	}
+
+	pr_info("sh_tmu: %s used for clock events\n", ced->name);
+	clockevents_register_device(ced);
+}
+
+static int sh_tmu_register(struct sh_tmu_priv *p, char *name,
+		    unsigned long clockevent_rating,
+		    unsigned long clocksource_rating)
+{
+	if (clockevent_rating)
+		sh_tmu_register_clockevent(p, name, clockevent_rating);
+	else if (clocksource_rating)
+		sh_tmu_register_clocksource(p, name, clocksource_rating);
+
+	return 0;
+}
+
+static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
+{
+	struct sh_timer_config *cfg = pdev->dev.platform_data;
+	struct resource *res;
+	int irq, ret;
+	ret = -ENXIO;
+
+	memset(p, 0, sizeof(*p));
+	p->pdev = pdev;
+
+	if (!cfg) {
+		dev_err(&p->pdev->dev, "missing platform data\n");
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, p);
+
+	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+		goto err0;
+	}
+
+	irq = platform_get_irq(p->pdev, 0);
+	if (irq < 0) {
+		dev_err(&p->pdev->dev, "failed to get irq\n");
+		goto err0;
+	}
+
+	/* map memory, let mapbase point to our channel */
+	p->mapbase = ioremap_nocache(res->start, resource_size(res));
+	if (p->mapbase == NULL) {
+		pr_err("sh_tmu: failed to remap I/O memory\n");
+		goto err0;
+	}
+
+	/* setup data for setup_irq() (too early for request_irq()) */
+	p->irqaction.name = cfg->name;
+	p->irqaction.handler = sh_tmu_interrupt;
+	p->irqaction.dev_id = p;
+	p->irqaction.irq = irq;
+	p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
+	p->irqaction.mask = CPU_MASK_NONE;
+
+	/* get hold of clock */
+	p->clk = clk_get(&p->pdev->dev, cfg->clk);
+	if (IS_ERR(p->clk)) {
+		pr_err("sh_tmu: cannot get clock \"%s\"\n", cfg->clk);
+		ret = PTR_ERR(p->clk);
+		goto err1;
+	}
+
+	return sh_tmu_register(p, cfg->name,
+			       cfg->clockevent_rating,
+			       cfg->clocksource_rating);
+ err1:
+	iounmap(p->mapbase);
+ err0:
+	return ret;
+}
+
+static int __devinit sh_tmu_probe(struct platform_device *pdev)
+{
+	struct sh_tmu_priv *p = platform_get_drvdata(pdev);
+	struct sh_timer_config *cfg = pdev->dev.platform_data;
+	int ret;
+
+	if (p) {
+		pr_info("sh_tmu: %s kept as earlytimer\n", cfg->name);
+		return 0;
+	}
+
+	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	ret = sh_tmu_setup(p, pdev);
+	if (ret) {
+		kfree(p);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return ret;
+}
+
+static int __devexit sh_tmu_remove(struct platform_device *pdev)
+{
+	return -EBUSY; /* cannot unregister clockevent and clocksource */
+}
+
+static struct platform_driver sh_tmu_device_driver = {
+	.probe		= sh_tmu_probe,
+	.remove		= __devexit_p(sh_tmu_remove),
+	.driver		= {
+		.name	= "sh_tmu",
+	}
+};
+
+static int __init sh_tmu_init(void)
+{
+	return platform_driver_register(&sh_tmu_device_driver);
+}
+
+static void __exit sh_tmu_exit(void)
+{
+	platform_driver_unregister(&sh_tmu_device_driver);
+}
+
+early_platform_init("earlytimer", &sh_tmu_device_driver);
+module_init(sh_tmu_init);
+module_exit(sh_tmu_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH TMU Timer Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 100bfd42206..6e6730f9dfd 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -7,7 +7,7 @@ menuconfig CONNECTOR
 	  of the netlink socket protocol.
 
 	  Connector support can also be built as a module.  If so, the module
-	  will be called cn.ko.
+	  will be called cn.
 
 if CONNECTOR
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index d270e8eb3e6..6e2ec0b1894 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -808,7 +808,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 		ret = -ENOMEM;
 		goto nomem_out;
 	}
-	if (!alloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
+	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
 		free_cpumask_var(policy->cpus);
 		kfree(policy);
 		ret = -ENOMEM;
@@ -1070,11 +1070,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 #endif
 
+	unlock_policy_rwsem_write(cpu);
+
 	if (cpufreq_driver->target)
 		__cpufreq_governor(data, CPUFREQ_GOV_STOP);
 
-	unlock_policy_rwsem_write(cpu);
-
 	kobject_put(&data->kobj);
 
 	/* we need to make sure that the underlying kobj is actually
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 2ecd95e4ab1..7a74d175287 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -91,6 +91,9 @@ static unsigned int dbs_enable;	/* number of CPUs using this policy */
  * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
  * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
  * is recursive for the same process. -Venki
+ * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
+ * would deadlock with cancel_delayed_work_sync(), which is needed for proper
+ * raceless workqueue teardown.
  */
 static DEFINE_MUTEX(dbs_mutex);
 
@@ -542,7 +545,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
 static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
 {
 	dbs_info->enable = 0;
-	cancel_delayed_work(&dbs_info->work);
+	cancel_delayed_work_sync(&dbs_info->work);
 }
 
 static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 338f428a15b..e741c339df7 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -98,6 +98,9 @@ static unsigned int dbs_enable;	/* number of CPUs using this policy */
  * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
  * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
  * is recursive for the same process. -Venki
+ * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
+ * would deadlock with cancel_delayed_work_sync(), which is needed for proper
+ * raceless workqueue teardown.
  */
 static DEFINE_MUTEX(dbs_mutex);
 
@@ -562,7 +565,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
 static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
 {
 	dbs_info->enable = 0;
-	cancel_delayed_work(&dbs_info->work);
+	cancel_delayed_work_sync(&dbs_info->work);
 }
 
 static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 01afd758072..5b27692372b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -12,7 +12,7 @@ if CRYPTO_HW
 
 config CRYPTO_DEV_PADLOCK
 	tristate "Support for VIA PadLock ACE"
-	depends on X86_32 && !UML
+	depends on X86 && !UML
 	select CRYPTO_ALGAPI
 	help
 	  Some VIA processors come with an integrated crypto engine
@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
 	  Available in VIA C3 and newer CPUs.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-aes.ko
+	  called padlock-aes.
 
 config CRYPTO_DEV_PADLOCK_SHA
 	tristate "PadLock driver for SHA1 and SHA256 algorithms"
@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
 	  Available in VIA C7 and newer processors.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-sha.ko
+	  called padlock-sha.
 
 config CRYPTO_DEV_GEODE
 	tristate "Support for the Geode LX AES engine"
@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
 	bool "Monolithic zcrypt module"
 	depends on ZCRYPT="m"
 	help
-	  Select this option if you want to have a single module z90crypt.ko
+	  Select this option if you want to have a single module z90crypt,
 	  that contains all parts of the crypto device driver (ap bus,
 	  request router and all the card drivers).
 
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 2bef086fb34..5f753fc0873 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -2564,7 +2564,7 @@ static void hifn_tasklet_callback(unsigned long data)
 		hifn_process_queue(dev);
 }
 
-static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int err, i;
 	struct hifn_device *dev;
@@ -2696,7 +2696,7 @@ err_out_disable_pci_device:
 	return err;
 }
 
-static void hifn_remove(struct pci_dev *pdev)
+static void __devexit hifn_remove(struct pci_dev *pdev)
 {
 	int i;
 	struct hifn_device *dev;
@@ -2744,7 +2744,7 @@ static struct pci_driver hifn_pci_driver = {
 	.remove   = __devexit_p(hifn_remove),
 };
 
-static int __devinit hifn_init(void)
+static int __init hifn_init(void)
 {
 	unsigned int freq;
 	int err;
@@ -2789,7 +2789,7 @@ static int __devinit hifn_init(void)
 	return 0;
 }
 
-static void __devexit hifn_fini(void)
+static void __exit hifn_fini(void)
 {
 	pci_unregister_driver(&hifn_pci_driver);
 
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index f9f05d7a707..6c6656d3b1e 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -415,6 +415,7 @@ static void crypto_done_action(unsigned long arg)
 static int init_ixp_crypto(void)
 {
 	int ret = -ENODEV;
+	u32 msg[2] = { 0, 0 };
 
 	if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
 				IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
@@ -426,9 +427,35 @@ static int init_ixp_crypto(void)
 		return ret;
 
 	if (!npe_running(npe_c)) {
-		npe_load_firmware(npe_c, npe_name(npe_c), dev);
+		ret = npe_load_firmware(npe_c, npe_name(npe_c), dev);
+		if (ret) {
+			return ret;
+		}
+		if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+			goto npe_error;
+	} else {
+		if (npe_send_message(npe_c, msg, "STATUS_MSG"))
+			goto npe_error;
+
+		if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+			goto npe_error;
 	}
 
+	switch ((msg[1]>>16) & 0xff) {
+	case 3:
+		printk(KERN_WARNING "Firmware of %s lacks AES support\n",
+				npe_name(npe_c));
+		support_aes = 0;
+		break;
+	case 4:
+	case 5:
+		support_aes = 1;
+		break;
+	default:
+		printk(KERN_ERR "Firmware of %s lacks crypto support\n",
+			npe_name(npe_c));
+		return -ENODEV;
+	}
 	/* buffer_pool will also be used to sometimes store the hmac,
 	 * so assure it is large enough
 	 */
@@ -459,6 +486,10 @@ static int init_ixp_crypto(void)
 
 	qmgr_enable_irq(RECV_QID);
 	return 0;
+
+npe_error:
+	printk(KERN_ERR "%s not responding\n", npe_name(npe_c));
+	ret = -EIO;
 err:
 	if (ctx_pool)
 		dma_pool_destroy(ctx_pool);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 3f0fdd18255..87f92c39b5f 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -154,7 +154,11 @@ static inline void padlock_reset_key(struct cword *cword)
 	int cpu = raw_smp_processor_id();
 
 	if (cword != per_cpu(last_cword, cpu))
+#ifndef CONFIG_X86_64
 		asm volatile ("pushfl; popfl");
+#else
+		asm volatile ("pushfq; popfq");
+#endif
 }
 
 static inline void padlock_store_cword(struct cword *cword)
@@ -208,10 +212,19 @@ static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key,
 
 	asm volatile ("test $1, %%cl;"
 		      "je 1f;"
+#ifndef CONFIG_X86_64
 		      "lea -1(%%ecx), %%eax;"
 		      "mov $1, %%ecx;"
+#else
+		      "lea -1(%%rcx), %%rax;"
+		      "mov $1, %%rcx;"
+#endif
 		      ".byte 0xf3,0x0f,0xa7,0xc8;"	/* rep xcryptecb */
+#ifndef CONFIG_X86_64
 		      "mov %%eax, %%ecx;"
+#else
+		      "mov %%rax, %%rcx;"
+#endif
 		      "1:"
 		      ".byte 0xf3,0x0f,0xa7,0xc8"	/* rep xcryptecb */
 		      : "+S"(input), "+D"(output)
@@ -489,4 +502,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algorithm support");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS("aes");
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index a3918c16b3d..c70775fd3ce 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -44,6 +44,8 @@
 #include <crypto/sha.h>
 #include <crypto/aead.h>
 #include <crypto/authenc.h>
+#include <crypto/skcipher.h>
+#include <crypto/scatterwalk.h>
 
 #include "talitos.h"
 
@@ -339,7 +341,8 @@ static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
 				status = error;
 
 		dma_unmap_single(dev, request->dma_desc,
-			sizeof(struct talitos_desc), DMA_BIDIRECTIONAL);
+				 sizeof(struct talitos_desc),
+				 DMA_BIDIRECTIONAL);
 
 		/* copy entries so we can call callback outside lock */
 		saved_req.desc = request->desc;
@@ -413,7 +416,8 @@ static struct talitos_desc *current_desc(struct device *dev, int ch)
 /*
  * user diagnostics; report root cause of error based on execution unit status
  */
-static void report_eu_error(struct device *dev, int ch, struct talitos_desc *desc)
+static void report_eu_error(struct device *dev, int ch,
+			    struct talitos_desc *desc)
 {
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	int i;
@@ -684,8 +688,8 @@ struct talitos_ctx {
 	unsigned int authsize;
 };
 
-static int aead_authenc_setauthsize(struct crypto_aead *authenc,
-						 unsigned int authsize)
+static int aead_setauthsize(struct crypto_aead *authenc,
+			    unsigned int authsize)
 {
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 
@@ -694,8 +698,8 @@ static int aead_authenc_setauthsize(struct crypto_aead *authenc,
 	return 0;
 }
 
-static int aead_authenc_setkey(struct crypto_aead *authenc,
-					    const u8 *key, unsigned int keylen)
+static int aead_setkey(struct crypto_aead *authenc,
+		       const u8 *key, unsigned int keylen)
 {
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	struct rtattr *rta = (void *)key;
@@ -740,7 +744,7 @@ badkey:
 }
 
 /*
- * ipsec_esp_edesc - s/w-extended ipsec_esp descriptor
+ * talitos_edesc - s/w-extended descriptor
  * @src_nents: number of segments in input scatterlist
  * @dst_nents: number of segments in output scatterlist
  * @dma_len: length of dma mapped link_tbl space
@@ -752,17 +756,67 @@ badkey:
  * is greater than 1, an integrity check value is concatenated to the end
  * of link_tbl data
  */
-struct ipsec_esp_edesc {
+struct talitos_edesc {
 	int src_nents;
 	int dst_nents;
+	int src_is_chained;
+	int dst_is_chained;
 	int dma_len;
 	dma_addr_t dma_link_tbl;
 	struct talitos_desc desc;
 	struct talitos_ptr link_tbl[0];
 };
 
+static int talitos_map_sg(struct device *dev, struct scatterlist *sg,
+			  unsigned int nents, enum dma_data_direction dir,
+			  int chained)
+{
+	if (unlikely(chained))
+		while (sg) {
+			dma_map_sg(dev, sg, 1, dir);
+			sg = scatterwalk_sg_next(sg);
+		}
+	else
+		dma_map_sg(dev, sg, nents, dir);
+	return nents;
+}
+
+static void talitos_unmap_sg_chain(struct device *dev, struct scatterlist *sg,
+				   enum dma_data_direction dir)
+{
+	while (sg) {
+		dma_unmap_sg(dev, sg, 1, dir);
+		sg = scatterwalk_sg_next(sg);
+	}
+}
+
+static void talitos_sg_unmap(struct device *dev,
+			     struct talitos_edesc *edesc,
+			     struct scatterlist *src,
+			     struct scatterlist *dst)
+{
+	unsigned int src_nents = edesc->src_nents ? : 1;
+	unsigned int dst_nents = edesc->dst_nents ? : 1;
+
+	if (src != dst) {
+		if (edesc->src_is_chained)
+			talitos_unmap_sg_chain(dev, src, DMA_TO_DEVICE);
+		else
+			dma_unmap_sg(dev, src, src_nents, DMA_TO_DEVICE);
+
+		if (edesc->dst_is_chained)
+			talitos_unmap_sg_chain(dev, dst, DMA_FROM_DEVICE);
+		else
+			dma_unmap_sg(dev, dst, dst_nents, DMA_FROM_DEVICE);
+	} else
+		if (edesc->src_is_chained)
+			talitos_unmap_sg_chain(dev, src, DMA_BIDIRECTIONAL);
+		else
+			dma_unmap_sg(dev, src, src_nents, DMA_BIDIRECTIONAL);
+}
+
 static void ipsec_esp_unmap(struct device *dev,
-			    struct ipsec_esp_edesc *edesc,
+			    struct talitos_edesc *edesc,
 			    struct aead_request *areq)
 {
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[6], DMA_FROM_DEVICE);
@@ -772,15 +826,7 @@ static void ipsec_esp_unmap(struct device *dev,
 
 	dma_unmap_sg(dev, areq->assoc, 1, DMA_TO_DEVICE);
 
-	if (areq->src != areq->dst) {
-		dma_unmap_sg(dev, areq->src, edesc->src_nents ? : 1,
-			     DMA_TO_DEVICE);
-		dma_unmap_sg(dev, areq->dst, edesc->dst_nents ? : 1,
-			     DMA_FROM_DEVICE);
-	} else {
-		dma_unmap_sg(dev, areq->src, edesc->src_nents ? : 1,
-			     DMA_BIDIRECTIONAL);
-	}
+	talitos_sg_unmap(dev, edesc, areq->src, areq->dst);
 
 	if (edesc->dma_len)
 		dma_unmap_single(dev, edesc->dma_link_tbl, edesc->dma_len,
@@ -795,13 +841,14 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 				   int err)
 {
 	struct aead_request *areq = context;
-	struct ipsec_esp_edesc *edesc =
-		 container_of(desc, struct ipsec_esp_edesc, desc);
 	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
+	struct talitos_edesc *edesc;
 	struct scatterlist *sg;
 	void *icvdata;
 
+	edesc = container_of(desc, struct talitos_edesc, desc);
+
 	ipsec_esp_unmap(dev, edesc, areq);
 
 	/* copy the generated ICV to dst */
@@ -819,17 +866,18 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 }
 
 static void ipsec_esp_decrypt_swauth_done(struct device *dev,
-				   struct talitos_desc *desc, void *context,
-				   int err)
+					  struct talitos_desc *desc,
+					  void *context, int err)
 {
 	struct aead_request *req = context;
-	struct ipsec_esp_edesc *edesc =
-		 container_of(desc, struct ipsec_esp_edesc, desc);
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
+	struct talitos_edesc *edesc;
 	struct scatterlist *sg;
 	void *icvdata;
 
+	edesc = container_of(desc, struct talitos_edesc, desc);
+
 	ipsec_esp_unmap(dev, edesc, req);
 
 	if (!err) {
@@ -851,20 +899,20 @@ static void ipsec_esp_decrypt_swauth_done(struct device *dev,
 }
 
 static void ipsec_esp_decrypt_hwauth_done(struct device *dev,
-				   struct talitos_desc *desc, void *context,
-				   int err)
+					  struct talitos_desc *desc,
+					  void *context, int err)
 {
 	struct aead_request *req = context;
-	struct ipsec_esp_edesc *edesc =
-		 container_of(desc, struct ipsec_esp_edesc, desc);
+	struct talitos_edesc *edesc;
+
+	edesc = container_of(desc, struct talitos_edesc, desc);
 
 	ipsec_esp_unmap(dev, edesc, req);
 
 	/* check ICV auth status */
-	if (!err)
-		if ((desc->hdr_lo & DESC_HDR_LO_ICCR1_MASK) !=
-		    DESC_HDR_LO_ICCR1_PASS)
-			err = -EBADMSG;
+	if (!err && ((desc->hdr_lo & DESC_HDR_LO_ICCR1_MASK) !=
+		     DESC_HDR_LO_ICCR1_PASS))
+		err = -EBADMSG;
 
 	kfree(edesc);
 
@@ -886,7 +934,7 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 		link_tbl_ptr->j_extent = 0;
 		link_tbl_ptr++;
 		cryptlen -= sg_dma_len(sg);
-		sg = sg_next(sg);
+		sg = scatterwalk_sg_next(sg);
 	}
 
 	/* adjust (decrease) last one (or two) entry's len to cryptlen */
@@ -910,7 +958,7 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 /*
  * fill in and submit ipsec_esp descriptor
  */
-static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
+static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq,
 		     u8 *giv, u64 seq,
 		     void (*callback) (struct device *dev,
 				       struct talitos_desc *desc,
@@ -952,32 +1000,31 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	desc->ptr[4].len = cpu_to_be16(cryptlen);
 	desc->ptr[4].j_extent = authsize;
 
-	if (areq->src == areq->dst)
-		sg_count = dma_map_sg(dev, areq->src, edesc->src_nents ? : 1,
-				      DMA_BIDIRECTIONAL);
-	else
-		sg_count = dma_map_sg(dev, areq->src, edesc->src_nents ? : 1,
-				      DMA_TO_DEVICE);
+	sg_count = talitos_map_sg(dev, areq->src, edesc->src_nents ? : 1,
+				  (areq->src == areq->dst) ? DMA_BIDIRECTIONAL
+							   : DMA_TO_DEVICE,
+				  edesc->src_is_chained);
 
 	if (sg_count == 1) {
 		desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
 	} else {
 		sg_link_tbl_len = cryptlen;
 
-		if ((edesc->desc.hdr & DESC_HDR_MODE1_MDEU_CICV) &&
-			(edesc->desc.hdr & DESC_HDR_MODE0_ENCRYPT) == 0) {
+		if (edesc->desc.hdr & DESC_HDR_MODE1_MDEU_CICV)
 			sg_link_tbl_len = cryptlen + authsize;
-		}
+
 		sg_count = sg_to_link_tbl(areq->src, sg_count, sg_link_tbl_len,
 					  &edesc->link_tbl[0]);
 		if (sg_count > 1) {
 			desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
 			desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
-			dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
-						   edesc->dma_len, DMA_BIDIRECTIONAL);
+			dma_sync_single_for_device(dev, edesc->dma_link_tbl,
+						   edesc->dma_len,
+						   DMA_BIDIRECTIONAL);
 		} else {
 			/* Only one segment now, so no link tbl needed */
-			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
+			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->
+								      src));
 		}
 	}
 
@@ -985,10 +1032,11 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	desc->ptr[5].len = cpu_to_be16(cryptlen);
 	desc->ptr[5].j_extent = authsize;
 
-	if (areq->src != areq->dst) {
-		sg_count = dma_map_sg(dev, areq->dst, edesc->dst_nents ? : 1,
-				      DMA_FROM_DEVICE);
-	}
+	if (areq->src != areq->dst)
+		sg_count = talitos_map_sg(dev, areq->dst,
+					  edesc->dst_nents ? : 1,
+					  DMA_FROM_DEVICE,
+					  edesc->dst_is_chained);
 
 	if (sg_count == 1) {
 		desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
@@ -1033,49 +1081,55 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	return ret;
 }
 
-
 /*
  * derive number of elements in scatterlist
  */
-static int sg_count(struct scatterlist *sg_list, int nbytes)
+static int sg_count(struct scatterlist *sg_list, int nbytes, int *chained)
 {
 	struct scatterlist *sg = sg_list;
 	int sg_nents = 0;
 
-	while (nbytes) {
+	*chained = 0;
+	while (nbytes > 0) {
 		sg_nents++;
 		nbytes -= sg->length;
-		sg = sg_next(sg);
+		if (!sg_is_last(sg) && (sg + 1)->length == 0)
+			*chained = 1;
+		sg = scatterwalk_sg_next(sg);
 	}
 
 	return sg_nents;
 }
 
 /*
- * allocate and map the ipsec_esp extended descriptor
+ * allocate and map the extended descriptor
  */
-static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
-						     int icv_stashing)
+static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
+						 struct scatterlist *src,
+						 struct scatterlist *dst,
+						 unsigned int cryptlen,
+						 unsigned int authsize,
+						 int icv_stashing,
+						 u32 cryptoflags)
 {
-	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
-	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 	int src_nents, dst_nents, alloc_len, dma_len;
-	gfp_t flags = areq->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
+	int src_chained, dst_chained = 0;
+	gfp_t flags = cryptoflags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
 		      GFP_ATOMIC;
 
-	if (areq->cryptlen + ctx->authsize > TALITOS_MAX_DATA_LEN) {
-		dev_err(ctx->dev, "cryptlen exceeds h/w max limit\n");
+	if (cryptlen + authsize > TALITOS_MAX_DATA_LEN) {
+		dev_err(dev, "length exceeds h/w max limit\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	src_nents = sg_count(areq->src, areq->cryptlen + ctx->authsize);
+	src_nents = sg_count(src, cryptlen + authsize, &src_chained);
 	src_nents = (src_nents == 1) ? 0 : src_nents;
 
-	if (areq->dst == areq->src) {
+	if (dst == src) {
 		dst_nents = src_nents;
 	} else {
-		dst_nents = sg_count(areq->dst, areq->cryptlen + ctx->authsize);
+		dst_nents = sg_count(dst, cryptlen + authsize, &dst_chained);
 		dst_nents = (dst_nents == 1) ? 0 : dst_nents;
 	}
 
@@ -1084,39 +1138,52 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 	 * allowing for two separate entries for ICV and generated ICV (+ 2),
 	 * and the ICV data itself
 	 */
-	alloc_len = sizeof(struct ipsec_esp_edesc);
+	alloc_len = sizeof(struct talitos_edesc);
 	if (src_nents || dst_nents) {
 		dma_len = (src_nents + dst_nents + 2) *
-				 sizeof(struct talitos_ptr) + ctx->authsize;
+				 sizeof(struct talitos_ptr) + authsize;
 		alloc_len += dma_len;
 	} else {
 		dma_len = 0;
-		alloc_len += icv_stashing ? ctx->authsize : 0;
+		alloc_len += icv_stashing ? authsize : 0;
 	}
 
 	edesc = kmalloc(alloc_len, GFP_DMA | flags);
 	if (!edesc) {
-		dev_err(ctx->dev, "could not allocate edescriptor\n");
+		dev_err(dev, "could not allocate edescriptor\n");
 		return ERR_PTR(-ENOMEM);
 	}
 
 	edesc->src_nents = src_nents;
 	edesc->dst_nents = dst_nents;
+	edesc->src_is_chained = src_chained;
+	edesc->dst_is_chained = dst_chained;
 	edesc->dma_len = dma_len;
-	edesc->dma_link_tbl = dma_map_single(ctx->dev, &edesc->link_tbl[0],
+	edesc->dma_link_tbl = dma_map_single(dev, &edesc->link_tbl[0],
 					     edesc->dma_len, DMA_BIDIRECTIONAL);
 
 	return edesc;
 }
 
-static int aead_authenc_encrypt(struct aead_request *req)
+static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq,
+					      int icv_stashing)
+{
+	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
+
+	return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst,
+				   areq->cryptlen, ctx->authsize, icv_stashing,
+				   areq->base.flags);
+}
+
+static int aead_encrypt(struct aead_request *req)
 {
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = ipsec_esp_edesc_alloc(req, 0);
+	edesc = aead_edesc_alloc(req, 0);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1126,70 +1193,67 @@ static int aead_authenc_encrypt(struct aead_request *req)
 	return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_encrypt_done);
 }
 
-
-
-static int aead_authenc_decrypt(struct aead_request *req)
+static int aead_decrypt(struct aead_request *req)
 {
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	unsigned int authsize = ctx->authsize;
 	struct talitos_private *priv = dev_get_drvdata(ctx->dev);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 	struct scatterlist *sg;
 	void *icvdata;
 
 	req->cryptlen -= authsize;
 
 	/* allocate extended descriptor */
-	edesc = ipsec_esp_edesc_alloc(req, 1);
+	edesc = aead_edesc_alloc(req, 1);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
 	if ((priv->features & TALITOS_FTR_HW_AUTH_CHECK) &&
-	    (((!edesc->src_nents && !edesc->dst_nents) ||
-		priv->features & TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT))) {
+	    ((!edesc->src_nents && !edesc->dst_nents) ||
+	     priv->features & TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT)) {
 
 		/* decrypt and check the ICV */
-		edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND |
+		edesc->desc.hdr = ctx->desc_hdr_template |
+				  DESC_HDR_DIR_INBOUND |
 				  DESC_HDR_MODE1_MDEU_CICV;
 
 		/* reset integrity check result bits */
 		edesc->desc.hdr_lo = 0;
 
-		return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_decrypt_hwauth_done);
+		return ipsec_esp(edesc, req, NULL, 0,
+				 ipsec_esp_decrypt_hwauth_done);
 
-	} else {
-
-		/* Have to check the ICV with software */
+	}
 
-		edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
+	/* Have to check the ICV with software */
+	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
 
-		/* stash incoming ICV for later cmp with ICV generated by the h/w */
-		if (edesc->dma_len)
-			icvdata = &edesc->link_tbl[edesc->src_nents +
-						   edesc->dst_nents + 2];
-		else
-			icvdata = &edesc->link_tbl[0];
+	/* stash incoming ICV for later cmp with ICV generated by the h/w */
+	if (edesc->dma_len)
+		icvdata = &edesc->link_tbl[edesc->src_nents +
+					   edesc->dst_nents + 2];
+	else
+		icvdata = &edesc->link_tbl[0];
 
-		sg = sg_last(req->src, edesc->src_nents ? : 1);
+	sg = sg_last(req->src, edesc->src_nents ? : 1);
 
-		memcpy(icvdata, (char *)sg_virt(sg) + sg->length - ctx->authsize,
-		       ctx->authsize);
+	memcpy(icvdata, (char *)sg_virt(sg) + sg->length - ctx->authsize,
+	       ctx->authsize);
 
-		return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_decrypt_swauth_done);
-	}
+	return ipsec_esp(edesc, req, NULL, 0, ipsec_esp_decrypt_swauth_done);
 }
 
-static int aead_authenc_givencrypt(
-	struct aead_givcrypt_request *req)
+static int aead_givencrypt(struct aead_givcrypt_request *req)
 {
 	struct aead_request *areq = &req->areq;
 	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
-	struct ipsec_esp_edesc *edesc;
+	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = ipsec_esp_edesc_alloc(areq, 0);
+	edesc = aead_edesc_alloc(areq, 0);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1204,31 +1268,228 @@ static int aead_authenc_givencrypt(
 			 ipsec_esp_encrypt_done);
 }
 
+static int ablkcipher_setkey(struct crypto_ablkcipher *cipher,
+			     const u8 *key, unsigned int keylen)
+{
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct ablkcipher_alg *alg = crypto_ablkcipher_alg(cipher);
+
+	if (keylen > TALITOS_MAX_KEY_SIZE)
+		goto badkey;
+
+	if (keylen < alg->min_keysize || keylen > alg->max_keysize)
+		goto badkey;
+
+	memcpy(&ctx->key, key, keylen);
+	ctx->keylen = keylen;
+
+	return 0;
+
+badkey:
+	crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+	return -EINVAL;
+}
+
+static void common_nonsnoop_unmap(struct device *dev,
+				  struct talitos_edesc *edesc,
+				  struct ablkcipher_request *areq)
+{
+	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[5], DMA_FROM_DEVICE);
+	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[2], DMA_TO_DEVICE);
+	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[1], DMA_TO_DEVICE);
+
+	talitos_sg_unmap(dev, edesc, areq->src, areq->dst);
+
+	if (edesc->dma_len)
+		dma_unmap_single(dev, edesc->dma_link_tbl, edesc->dma_len,
+				 DMA_BIDIRECTIONAL);
+}
+
+static void ablkcipher_done(struct device *dev,
+			    struct talitos_desc *desc, void *context,
+			    int err)
+{
+	struct ablkcipher_request *areq = context;
+	struct talitos_edesc *edesc;
+
+	edesc = container_of(desc, struct talitos_edesc, desc);
+
+	common_nonsnoop_unmap(dev, edesc, areq);
+
+	kfree(edesc);
+
+	areq->base.complete(&areq->base, err);
+}
+
+static int common_nonsnoop(struct talitos_edesc *edesc,
+			   struct ablkcipher_request *areq,
+			   u8 *giv,
+			   void (*callback) (struct device *dev,
+					     struct talitos_desc *desc,
+					     void *context, int error))
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct device *dev = ctx->dev;
+	struct talitos_desc *desc = &edesc->desc;
+	unsigned int cryptlen = areq->nbytes;
+	unsigned int ivsize;
+	int sg_count, ret;
+
+	/* first DWORD empty */
+	desc->ptr[0].len = 0;
+	desc->ptr[0].ptr = 0;
+	desc->ptr[0].j_extent = 0;
+
+	/* cipher iv */
+	ivsize = crypto_ablkcipher_ivsize(cipher);
+	map_single_talitos_ptr(dev, &desc->ptr[1], ivsize, giv ?: areq->info, 0,
+			       DMA_TO_DEVICE);
+
+	/* cipher key */
+	map_single_talitos_ptr(dev, &desc->ptr[2], ctx->keylen,
+			       (char *)&ctx->key, 0, DMA_TO_DEVICE);
+
+	/*
+	 * cipher in
+	 */
+	desc->ptr[3].len = cpu_to_be16(cryptlen);
+	desc->ptr[3].j_extent = 0;
+
+	sg_count = talitos_map_sg(dev, areq->src, edesc->src_nents ? : 1,
+				  (areq->src == areq->dst) ? DMA_BIDIRECTIONAL
+							   : DMA_TO_DEVICE,
+				  edesc->src_is_chained);
+
+	if (sg_count == 1) {
+		desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->src));
+	} else {
+		sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
+					  &edesc->link_tbl[0]);
+		if (sg_count > 1) {
+			desc->ptr[3].j_extent |= DESC_PTR_LNKTBL_JUMP;
+			desc->ptr[3].ptr = cpu_to_be32(edesc->dma_link_tbl);
+			dma_sync_single_for_device(dev, edesc->dma_link_tbl,
+						   edesc->dma_len,
+						   DMA_BIDIRECTIONAL);
+		} else {
+			/* Only one segment now, so no link tbl needed */
+			desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->
+								      src));
+		}
+	}
+
+	/* cipher out */
+	desc->ptr[4].len = cpu_to_be16(cryptlen);
+	desc->ptr[4].j_extent = 0;
+
+	if (areq->src != areq->dst)
+		sg_count = talitos_map_sg(dev, areq->dst,
+					  edesc->dst_nents ? : 1,
+					  DMA_FROM_DEVICE,
+					  edesc->dst_is_chained);
+
+	if (sg_count == 1) {
+		desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->dst));
+	} else {
+		struct talitos_ptr *link_tbl_ptr =
+			&edesc->link_tbl[edesc->src_nents + 1];
+
+		desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
+		desc->ptr[4].ptr = cpu_to_be32((struct talitos_ptr *)
+					       edesc->dma_link_tbl +
+					       edesc->src_nents + 1);
+		sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
+					  link_tbl_ptr);
+		dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
+					   edesc->dma_len, DMA_BIDIRECTIONAL);
+	}
+
+	/* iv out */
+	map_single_talitos_ptr(dev, &desc->ptr[5], ivsize, ctx->iv, 0,
+			       DMA_FROM_DEVICE);
+
+	/* last DWORD empty */
+	desc->ptr[6].len = 0;
+	desc->ptr[6].ptr = 0;
+	desc->ptr[6].j_extent = 0;
+
+	ret = talitos_submit(dev, desc, callback, areq);
+	if (ret != -EINPROGRESS) {
+		common_nonsnoop_unmap(dev, edesc, areq);
+		kfree(edesc);
+	}
+	return ret;
+}
+
+static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
+						    areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+
+	return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst, areq->nbytes,
+				   0, 0, areq->base.flags);
+}
+
+static int ablkcipher_encrypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct talitos_edesc *edesc;
+
+	/* allocate extended descriptor */
+	edesc = ablkcipher_edesc_alloc(areq);
+	if (IS_ERR(edesc))
+		return PTR_ERR(edesc);
+
+	/* set encrypt */
+	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
+
+	return common_nonsnoop(edesc, areq, NULL, ablkcipher_done);
+}
+
+static int ablkcipher_decrypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct talitos_edesc *edesc;
+
+	/* allocate extended descriptor */
+	edesc = ablkcipher_edesc_alloc(areq);
+	if (IS_ERR(edesc))
+		return PTR_ERR(edesc);
+
+	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_DIR_INBOUND;
+
+	return common_nonsnoop(edesc, areq, NULL, ablkcipher_done);
+}
+
 struct talitos_alg_template {
-	char name[CRYPTO_MAX_ALG_NAME];
-	char driver_name[CRYPTO_MAX_ALG_NAME];
-	unsigned int blocksize;
-	struct aead_alg aead;
-	struct device *dev;
+	struct crypto_alg alg;
 	__be32 desc_hdr_template;
 };
 
 static struct talitos_alg_template driver_algs[] = {
-	/* single-pass ipsec_esp descriptor */
+	/* AEAD algorithms.  These use a single-pass ipsec_esp descriptor */
 	{
-		.name = "authenc(hmac(sha1),cbc(aes))",
-		.driver_name = "authenc-hmac-sha1-cbc-aes-talitos",
-		.blocksize = AES_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = AES_BLOCK_SIZE,
-			.maxauthsize = SHA1_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha1),cbc(aes))",
+			.cra_driver_name = "authenc-hmac-sha1-cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = AES_BLOCK_SIZE,
+				.maxauthsize = SHA1_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_AESU |
 		                     DESC_HDR_MODE0_AESU_CBC |
@@ -1238,19 +1499,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA1_HMAC,
 	},
 	{
-		.name = "authenc(hmac(sha1),cbc(des3_ede))",
-		.driver_name = "authenc-hmac-sha1-cbc-3des-talitos",
-		.blocksize = DES3_EDE_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = DES3_EDE_BLOCK_SIZE,
-			.maxauthsize = SHA1_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha1),cbc(des3_ede))",
+			.cra_driver_name = "authenc-hmac-sha1-cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+				.maxauthsize = SHA1_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_DEU |
 		                     DESC_HDR_MODE0_DEU_CBC |
@@ -1261,19 +1526,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA1_HMAC,
 	},
 	{
-		.name = "authenc(hmac(sha256),cbc(aes))",
-		.driver_name = "authenc-hmac-sha256-cbc-aes-talitos",
-		.blocksize = AES_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = AES_BLOCK_SIZE,
-			.maxauthsize = SHA256_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha256),cbc(aes))",
+			.cra_driver_name = "authenc-hmac-sha256-cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = AES_BLOCK_SIZE,
+				.maxauthsize = SHA256_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_AESU |
 		                     DESC_HDR_MODE0_AESU_CBC |
@@ -1283,19 +1552,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA256_HMAC,
 	},
 	{
-		.name = "authenc(hmac(sha256),cbc(des3_ede))",
-		.driver_name = "authenc-hmac-sha256-cbc-3des-talitos",
-		.blocksize = DES3_EDE_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = DES3_EDE_BLOCK_SIZE,
-			.maxauthsize = SHA256_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(sha256),cbc(des3_ede))",
+			.cra_driver_name = "authenc-hmac-sha256-cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+				.maxauthsize = SHA256_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_DEU |
 		                     DESC_HDR_MODE0_DEU_CBC |
@@ -1306,19 +1579,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_SHA256_HMAC,
 	},
 	{
-		.name = "authenc(hmac(md5),cbc(aes))",
-		.driver_name = "authenc-hmac-md5-cbc-aes-talitos",
-		.blocksize = AES_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = AES_BLOCK_SIZE,
-			.maxauthsize = MD5_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(md5),cbc(aes))",
+			.cra_driver_name = "authenc-hmac-md5-cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = AES_BLOCK_SIZE,
+				.maxauthsize = MD5_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_AESU |
 		                     DESC_HDR_MODE0_AESU_CBC |
@@ -1328,19 +1605,23 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_MD5_HMAC,
 	},
 	{
-		.name = "authenc(hmac(md5),cbc(des3_ede))",
-		.driver_name = "authenc-hmac-md5-cbc-3des-talitos",
-		.blocksize = DES3_EDE_BLOCK_SIZE,
-		.aead = {
-			.setkey = aead_authenc_setkey,
-			.setauthsize = aead_authenc_setauthsize,
-			.encrypt = aead_authenc_encrypt,
-			.decrypt = aead_authenc_decrypt,
-			.givencrypt = aead_authenc_givencrypt,
-			.geniv = "<built-in>",
-			.ivsize = DES3_EDE_BLOCK_SIZE,
-			.maxauthsize = MD5_DIGEST_SIZE,
-			},
+		.alg = {
+			.cra_name = "authenc(hmac(md5),cbc(des3_ede))",
+			.cra_driver_name = "authenc-hmac-md5-cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_aead_type,
+			.cra_aead = {
+				.setkey = aead_setkey,
+				.setauthsize = aead_setauthsize,
+				.encrypt = aead_encrypt,
+				.decrypt = aead_decrypt,
+				.givencrypt = aead_givencrypt,
+				.geniv = "<built-in>",
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+				.maxauthsize = MD5_DIGEST_SIZE,
+			}
+		},
 		.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
 			             DESC_HDR_SEL0_DEU |
 		                     DESC_HDR_MODE0_DEU_CBC |
@@ -1349,6 +1630,52 @@ static struct talitos_alg_template driver_algs[] = {
 		                     DESC_HDR_MODE1_MDEU_INIT |
 		                     DESC_HDR_MODE1_MDEU_PAD |
 		                     DESC_HDR_MODE1_MDEU_MD5_HMAC,
+	},
+	/* ABLKCIPHER algorithms. */
+	{
+		.alg = {
+			.cra_name = "cbc(aes)",
+			.cra_driver_name = "cbc-aes-talitos",
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+                                     CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_ablkcipher = {
+				.setkey = ablkcipher_setkey,
+				.encrypt = ablkcipher_encrypt,
+				.decrypt = ablkcipher_decrypt,
+				.geniv = "eseqiv",
+				.min_keysize = AES_MIN_KEY_SIZE,
+				.max_keysize = AES_MAX_KEY_SIZE,
+				.ivsize = AES_BLOCK_SIZE,
+			}
+		},
+		.desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
+				     DESC_HDR_SEL0_AESU |
+				     DESC_HDR_MODE0_AESU_CBC,
+	},
+	{
+		.alg = {
+			.cra_name = "cbc(des3_ede)",
+			.cra_driver_name = "cbc-3des-talitos",
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+                                     CRYPTO_ALG_ASYNC,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_ablkcipher = {
+				.setkey = ablkcipher_setkey,
+				.encrypt = ablkcipher_encrypt,
+				.decrypt = ablkcipher_decrypt,
+				.geniv = "eseqiv",
+				.min_keysize = DES3_EDE_KEY_SIZE,
+				.max_keysize = DES3_EDE_KEY_SIZE,
+				.ivsize = DES3_EDE_BLOCK_SIZE,
+			}
+		},
+		.desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |
+			             DESC_HDR_SEL0_DEU |
+		                     DESC_HDR_MODE0_DEU_CBC |
+		                     DESC_HDR_MODE0_DEU_3DES,
 	}
 };
 
@@ -1362,12 +1689,14 @@ struct talitos_crypto_alg {
 static int talitos_cra_init(struct crypto_tfm *tfm)
 {
 	struct crypto_alg *alg = tfm->__crt_alg;
-	struct talitos_crypto_alg *talitos_alg =
-		 container_of(alg, struct talitos_crypto_alg, crypto_alg);
+	struct talitos_crypto_alg *talitos_alg;
 	struct talitos_ctx *ctx = crypto_tfm_ctx(tfm);
 
+	talitos_alg =  container_of(alg, struct talitos_crypto_alg, crypto_alg);
+
 	/* update context with ptr to dev */
 	ctx->dev = talitos_alg->dev;
+
 	/* copy descriptor header template value */
 	ctx->desc_hdr_template = talitos_alg->desc_hdr_template;
 
@@ -1453,19 +1782,13 @@ static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev,
 		return ERR_PTR(-ENOMEM);
 
 	alg = &t_alg->crypto_alg;
+	*alg = template->alg;
 
-	snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", template->name);
-	snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
-		 template->driver_name);
 	alg->cra_module = THIS_MODULE;
 	alg->cra_init = talitos_cra_init;
 	alg->cra_priority = TALITOS_CRA_PRIORITY;
-	alg->cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC;
-	alg->cra_blocksize = template->blocksize;
 	alg->cra_alignmask = 0;
-	alg->cra_type = &crypto_aead_type;
 	alg->cra_ctxsize = sizeof(struct talitos_ctx);
-	alg->cra_u.aead = template->aead;
 
 	t_alg->desc_hdr_template = template->desc_hdr_template;
 	t_alg->dev = dev;
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index da8a8ed9e41..f18d1bde043 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -179,9 +179,14 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan)
 static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
 			struct fsl_desc_sw *desc)
 {
+	u64 snoop_bits;
+
+	snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+		? FSL_DMA_SNEN : 0;
+
 	desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
-		DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64)	| FSL_DMA_EOL,
-		64);
+		DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
+			| snoop_bits, 64);
 }
 
 static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
@@ -313,8 +318,8 @@ static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable)
 
 static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 {
-	struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
 	struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+	struct fsl_desc_sw *desc;
 	unsigned long flags;
 	dma_cookie_t cookie;
 
@@ -322,14 +327,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	spin_lock_irqsave(&fsl_chan->desc_lock, flags);
 
 	cookie = fsl_chan->common.cookie;
-	cookie++;
-	if (cookie < 0)
-		cookie = 1;
-	desc->async_tx.cookie = cookie;
-	fsl_chan->common.cookie = desc->async_tx.cookie;
+	list_for_each_entry(desc, &tx->tx_list, node) {
+		cookie++;
+		if (cookie < 0)
+			cookie = 1;
 
-	append_ld_queue(fsl_chan, desc);
-	list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+		desc->async_tx.cookie = cookie;
+	}
+
+	fsl_chan->common.cookie = cookie;
+	append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
+	list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
 
 	spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
 
@@ -454,8 +462,8 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
 {
 	struct fsl_dma_chan *fsl_chan;
 	struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+	struct list_head *list;
 	size_t copy;
-	LIST_HEAD(link_chain);
 
 	if (!chan)
 		return NULL;
@@ -472,7 +480,7 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
 		if (!new) {
 			dev_err(fsl_chan->dev,
 					"No free memory for link descriptor\n");
-			return NULL;
+			goto fail;
 		}
 #ifdef FSL_DMA_LD_DEBUG
 		dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
@@ -507,7 +515,19 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
 	/* Set End-of-link to the last link descriptor of new list*/
 	set_ld_eol(fsl_chan, new);
 
-	return first ? &first->async_tx : NULL;
+	return &first->async_tx;
+
+fail:
+	if (!first)
+		return NULL;
+
+	list = &first->async_tx.tx_list;
+	list_for_each_entry_safe_reverse(new, prev, list, node) {
+		list_del(&new->node);
+		dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+	}
+
+	return NULL;
 }
 
 /**
@@ -598,15 +618,16 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan)
 	dma_addr_t next_dest_addr;
 	unsigned long flags;
 
+	spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
 	if (!dma_is_idle(fsl_chan))
-		return;
+		goto out_unlock;
 
 	dma_halt(fsl_chan);
 
 	/* If there are some link descriptors
 	 * not transfered in queue. We need to start it.
 	 */
-	spin_lock_irqsave(&fsl_chan->desc_lock, flags);
 
 	/* Find the first un-transfer desciptor */
 	for (ld_node = fsl_chan->ld_queue.next;
@@ -617,19 +638,20 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan)
 				fsl_chan->common.cookie) == DMA_SUCCESS);
 		ld_node = ld_node->next);
 
-	spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
-
 	if (ld_node != &fsl_chan->ld_queue) {
 		/* Get the ld start address from ld_queue */
 		next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
-		dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n",
-				(void *)next_dest_addr);
+		dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n",
+				(unsigned long long)next_dest_addr);
 		set_cdar(fsl_chan, next_dest_addr);
 		dma_start(fsl_chan);
 	} else {
 		set_cdar(fsl_chan, 0);
 		set_ndar(fsl_chan, 0);
 	}
+
+out_unlock:
+	spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
 }
 
 /**
@@ -734,8 +756,9 @@ static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data)
 	 */
 	if (stat & FSL_DMA_SR_EOSI) {
 		dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
-		dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n",
-			(void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan));
+		dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n",
+			(unsigned long long)get_cdar(fsl_chan),
+			(unsigned long long)get_ndar(fsl_chan));
 		stat &= ~FSL_DMA_SR_EOSI;
 		update_cookie = 1;
 	}
@@ -830,7 +853,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 			new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
 
 	new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
-	if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
+	if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
 		dev_err(fdev->dev, "There is no %d channel!\n",
 				new_fsl_chan->id);
 		err = -EINVAL;
@@ -925,8 +948,8 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev,
 	}
 
 	dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
-			"controller at %p...\n",
-			match->compatible, (void *)fdev->reg.start);
+			"controller at 0x%llx...\n",
+			match->compatible, (unsigned long long)fdev->reg.start);
 	fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
 						- fdev->reg.start + 1);
 
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 1955ee8d6d2..a600fc0f796 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -173,7 +173,7 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
 	xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
 
 #ifdef  CONFIG_I7300_IDLE_IOAT_CHANNEL
-	if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+	if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
 		device->common.chancnt--;
 	}
 #endif
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e5f5c5a8ba6..ab4f3592a11 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -49,7 +49,6 @@ config EDAC_DEBUG_VERBOSE
 
 config EDAC_MM_EDAC
 	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
-	default y
 	help
 	  Some systems are able to detect and correct errors in main
 	  memory.  EDAC can report statistics on memory error
@@ -58,6 +57,31 @@ config EDAC_MM_EDAC
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
+config EDAC_AMD64
+	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
+	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI
+	help
+	  Support for error detection and correction on the AMD 64
+	  Families of Memory Controllers (K8, F10h and F11h)
+
+config EDAC_AMD64_ERROR_INJECTION
+	bool "Sysfs Error Injection facilities"
+	depends on EDAC_AMD64
+	help
+	  Recent Opterons (Family 10h and later) provide for Memory Error
+	  Injection into the ECC detection circuits. The amd64_edac module
+	  allows the operator/user to inject Uncorrectable and Correctable
+	  errors into DRAM.
+
+	  When enabled, in each of the respective memory controller directories
+	  (/sys/devices/system/edac/mc/mcX), there are 3 input files:
+
+	  - inject_section (0..3, 16-byte section of 64-byte cacheline),
+	  - inject_word (0..8, 16-bit word of 16-byte section),
+	  - inject_ecc_vector (hex ecc vector: select bits of inject word)
+
+	  In addition, there are two control files, inject_read and inject_write,
+	  which trigger the DRAM ECC Read and Write respectively.
 
 config EDAC_AMD76X
 	tristate "AMD 76x (760, 762, 768)"
@@ -192,16 +216,20 @@ config EDAC_PPC4XX
 
 config EDAC_AMD8131
 	tristate "AMD8131 HyperTransport PCI-X Tunnel"
-	depends on EDAC_MM_EDAC && PCI
+	depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
 	help
 	  Support for error detection and correction on the
 	  AMD8131 HyperTransport PCI-X Tunnel chip.
+	  Note, add more Kconfig dependency if it's adopted
+	  on some machine other than Maple.
 
 config EDAC_AMD8111
 	tristate "AMD8111 HyperTransport I/O Hub"
-	depends on EDAC_MM_EDAC && PCI
+	depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
 	help
 	  Support for error detection and correction on the
 	  AMD8111 HyperTransport I/O Hub chip.
+	  Note, add more Kconfig dependency if it's adopted
+	  on some machine other than Maple.
 
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index a5fdcf02f59..633dc5604ee 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -30,8 +30,17 @@ obj-$(CONFIG_EDAC_I3000)		+= i3000_edac.o
 obj-$(CONFIG_EDAC_X38)			+= x38_edac.o
 obj-$(CONFIG_EDAC_I82860)		+= i82860_edac.o
 obj-$(CONFIG_EDAC_R82600)		+= r82600_edac.o
+
+amd64_edac_mod-y :=  amd64_edac_err_types.o amd64_edac.o
+amd64_edac_mod-$(CONFIG_EDAC_DEBUG) += amd64_edac_dbg.o
+amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
+
+obj-$(CONFIG_EDAC_AMD64)		+= amd64_edac_mod.o
+
 obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
 obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac.o
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
 obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111)		+= amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131)		+= amd8131_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
new file mode 100644
index 00000000000..c36bf40568c
--- /dev/null
+++ b/drivers/edac/amd64_edac.c
@@ -0,0 +1,3354 @@
+#include "amd64_edac.h"
+#include <asm/k8.h>
+
+static struct edac_pci_ctl_info *amd64_ctl_pci;
+
+static int report_gart_errors;
+module_param(report_gart_errors, int, 0644);
+
+/*
+ * Set by command line parameter. If BIOS has enabled the ECC, this override is
+ * cleared to prevent re-enabling the hardware by this driver.
+ */
+static int ecc_enable_override;
+module_param(ecc_enable_override, int, 0644);
+
+/* Lookup table for all possible MC control instances */
+struct amd64_pvt;
+static struct mem_ctl_info *mci_lookup[MAX_NUMNODES];
+static struct amd64_pvt *pvt_lookup[MAX_NUMNODES];
+
+/*
+ * Memory scrubber control interface. For K8, memory scrubbing is handled by
+ * hardware and can involve L2 cache, dcache as well as the main memory. With
+ * F10, this is extended to L3 cache scrubbing on CPU models sporting that
+ * functionality.
+ *
+ * This causes the "units" for the scrubbing speed to vary from 64 byte blocks
+ * (dram) over to cache lines. This is nasty, so we will use bandwidth in
+ * bytes/sec for the setting.
+ *
+ * Currently, we only do dram scrubbing. If the scrubbing is done in software on
+ * other archs, we might not have access to the caches directly.
+ */
+
+/*
+ * scan the scrub rate mapping table for a close or matching bandwidth value to
+ * issue. If requested is too big, then use last maximum value found.
+ */
+static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
+				       u32 min_scrubrate)
+{
+	u32 scrubval;
+	int i;
+
+	/*
+	 * map the configured rate (new_bw) to a value specific to the AMD64
+	 * memory controller and apply to register. Search for the first
+	 * bandwidth entry that is greater or equal than the setting requested
+	 * and program that. If at last entry, turn off DRAM scrubbing.
+	 */
+	for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
+		/*
+		 * skip scrub rates which aren't recommended
+		 * (see F10 BKDG, F3x58)
+		 */
+		if (scrubrates[i].scrubval < min_scrubrate)
+			continue;
+
+		if (scrubrates[i].bandwidth <= new_bw)
+			break;
+
+		/*
+		 * if no suitable bandwidth found, turn off DRAM scrubbing
+		 * entirely by falling back to the last element in the
+		 * scrubrates array.
+		 */
+	}
+
+	scrubval = scrubrates[i].scrubval;
+	if (scrubval)
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Setting scrub rate bandwidth: %u\n",
+			    scrubrates[i].bandwidth);
+	else
+		edac_printk(KERN_DEBUG, EDAC_MC, "Turning scrubbing off.\n");
+
+	pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F);
+
+	return 0;
+}
+
+static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 min_scrubrate = 0x0;
+
+	switch (boot_cpu_data.x86) {
+	case 0xf:
+		min_scrubrate = K8_MIN_SCRUB_RATE_BITS;
+		break;
+	case 0x10:
+		min_scrubrate = F10_MIN_SCRUB_RATE_BITS;
+		break;
+	case 0x11:
+		min_scrubrate = F11_MIN_SCRUB_RATE_BITS;
+		break;
+
+	default:
+		amd64_printk(KERN_ERR, "Unsupported family!\n");
+		break;
+	}
+	return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, *bandwidth,
+			min_scrubrate);
+}
+
+static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 scrubval = 0;
+	int status = -1, i, ret = 0;
+
+	ret = pci_read_config_dword(pvt->misc_f3_ctl, K8_SCRCTRL, &scrubval);
+	if (ret)
+		debugf0("Reading K8_SCRCTRL failed\n");
+
+	scrubval = scrubval & 0x001F;
+
+	edac_printk(KERN_DEBUG, EDAC_MC,
+		    "pci-read, sdram scrub control value: %d \n", scrubval);
+
+	for (i = 0; ARRAY_SIZE(scrubrates); i++) {
+		if (scrubrates[i].scrubval == scrubval) {
+			*bw = scrubrates[i].bandwidth;
+			status = 0;
+			break;
+		}
+	}
+
+	return status;
+}
+
+/* Map from a CSROW entry to the mask entry that operates on it */
+static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
+{
+	return csrow >> (pvt->num_dcsm >> 3);
+}
+
+/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
+static u32 amd64_get_dct_base(struct amd64_pvt *pvt, int dct, int csrow)
+{
+	if (dct == 0)
+		return pvt->dcsb0[csrow];
+	else
+		return pvt->dcsb1[csrow];
+}
+
+/*
+ * Return the 'mask' address the i'th CS entry. This function is needed because
+ * there number of DCSM registers on Rev E and prior vs Rev F and later is
+ * different.
+ */
+static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow)
+{
+	if (dct == 0)
+		return pvt->dcsm0[amd64_map_to_dcs_mask(pvt, csrow)];
+	else
+		return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)];
+}
+
+
+/*
+ * In *base and *limit, pass back the full 40-bit base and limit physical
+ * addresses for the node given by node_id.  This information is obtained from
+ * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The
+ * base and limit addresses are of type SysAddr, as defined at the start of
+ * section 3.4.4 (p. 70).  They are the lowest and highest physical addresses
+ * in the address range they represent.
+ */
+static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id,
+			       u64 *base, u64 *limit)
+{
+	*base = pvt->dram_base[node_id];
+	*limit = pvt->dram_limit[node_id];
+}
+
+/*
+ * Return 1 if the SysAddr given by sys_addr matches the base/limit associated
+ * with node_id
+ */
+static int amd64_base_limit_match(struct amd64_pvt *pvt,
+					u64 sys_addr, int node_id)
+{
+	u64 base, limit, addr;
+
+	amd64_get_base_and_limit(pvt, node_id, &base, &limit);
+
+	/* The K8 treats this as a 40-bit value.  However, bits 63-40 will be
+	 * all ones if the most significant implemented address bit is 1.
+	 * Here we discard bits 63-40.  See section 3.4.2 of AMD publication
+	 * 24592: AMD x86-64 Architecture Programmer's Manual Volume 1
+	 * Application Programming.
+	 */
+	addr = sys_addr & 0x000000ffffffffffull;
+
+	return (addr >= base) && (addr <= limit);
+}
+
+/*
+ * Attempt to map a SysAddr to a node. On success, return a pointer to the
+ * mem_ctl_info structure for the node that the SysAddr maps to.
+ *
+ * On failure, return NULL.
+ */
+static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
+						u64 sys_addr)
+{
+	struct amd64_pvt *pvt;
+	int node_id;
+	u32 intlv_en, bits;
+
+	/*
+	 * Here we use the DRAM Base (section 3.4.4.1) and DRAM Limit (section
+	 * 3.4.4.2) registers to map the SysAddr to a node ID.
+	 */
+	pvt = mci->pvt_info;
+
+	/*
+	 * The value of this field should be the same for all DRAM Base
+	 * registers.  Therefore we arbitrarily choose to read it from the
+	 * register for node 0.
+	 */
+	intlv_en = pvt->dram_IntlvEn[0];
+
+	if (intlv_en == 0) {
+		for (node_id = 0; ; ) {
+			if (amd64_base_limit_match(pvt, sys_addr, node_id))
+				break;
+
+			if (++node_id >= DRAM_REG_COUNT)
+				goto err_no_match;
+		}
+		goto found;
+	}
+
+	if (unlikely((intlv_en != (0x01 << 8)) &&
+		     (intlv_en != (0x03 << 8)) &&
+		     (intlv_en != (0x07 << 8)))) {
+		amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from "
+			     "IntlvEn field of DRAM Base Register for node 0: "
+			     "This probably indicates a BIOS bug.\n", intlv_en);
+		return NULL;
+	}
+
+	bits = (((u32) sys_addr) >> 12) & intlv_en;
+
+	for (node_id = 0; ; ) {
+		if ((pvt->dram_limit[node_id] & intlv_en) == bits)
+			break;	/* intlv_sel field matches */
+
+		if (++node_id >= DRAM_REG_COUNT)
+			goto err_no_match;
+	}
+
+	/* sanity test for sys_addr */
+	if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) {
+		amd64_printk(KERN_WARNING,
+			  "%s(): sys_addr 0x%lx falls outside base/limit "
+			  "address range for node %d with node interleaving "
+			  "enabled.\n", __func__, (unsigned long)sys_addr,
+			  node_id);
+		return NULL;
+	}
+
+found:
+	return edac_mc_find(node_id);
+
+err_no_match:
+	debugf2("sys_addr 0x%lx doesn't match any node\n",
+		(unsigned long)sys_addr);
+
+	return NULL;
+}
+
+/*
+ * Extract the DRAM CS base address from selected csrow register.
+ */
+static u64 base_from_dct_base(struct amd64_pvt *pvt, int csrow)
+{
+	return ((u64) (amd64_get_dct_base(pvt, 0, csrow) & pvt->dcsb_base)) <<
+				pvt->dcs_shift;
+}
+
+/*
+ * Extract the mask from the dcsb0[csrow] entry in a CPU revision-specific way.
+ */
+static u64 mask_from_dct_mask(struct amd64_pvt *pvt, int csrow)
+{
+	u64 dcsm_bits, other_bits;
+	u64 mask;
+
+	/* Extract bits from DRAM CS Mask. */
+	dcsm_bits = amd64_get_dct_mask(pvt, 0, csrow) & pvt->dcsm_mask;
+
+	other_bits = pvt->dcsm_mask;
+	other_bits = ~(other_bits << pvt->dcs_shift);
+
+	/*
+	 * The extracted bits from DCSM belong in the spaces represented by
+	 * the cleared bits in other_bits.
+	 */
+	mask = (dcsm_bits << pvt->dcs_shift) | other_bits;
+
+	return mask;
+}
+
+/*
+ * @input_addr is an InputAddr associated with the node given by mci. Return the
+ * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr).
+ */
+static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
+{
+	struct amd64_pvt *pvt;
+	int csrow;
+	u64 base, mask;
+
+	pvt = mci->pvt_info;
+
+	/*
+	 * Here we use the DRAM CS Base and DRAM CS Mask registers. For each CS
+	 * base/mask register pair, test the condition shown near the start of
+	 * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
+	 */
+	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+
+		/* This DRAM chip select is disabled on this node */
+		if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
+			continue;
+
+		base = base_from_dct_base(pvt, csrow);
+		mask = ~mask_from_dct_mask(pvt, csrow);
+
+		if ((input_addr & mask) == (base & mask)) {
+			debugf2("InputAddr 0x%lx matches csrow %d (node %d)\n",
+				(unsigned long)input_addr, csrow,
+				pvt->mc_node_id);
+
+			return csrow;
+		}
+	}
+
+	debugf2("no matching csrow for InputAddr 0x%lx (MC node %d)\n",
+		(unsigned long)input_addr, pvt->mc_node_id);
+
+	return -1;
+}
+
+/*
+ * Return the base value defined by the DRAM Base register for the node
+ * represented by mci.  This function returns the full 40-bit value despite the
+ * fact that the register only stores bits 39-24 of the value. See section
+ * 3.4.4.1 (BKDG #26094, K8, revA-E)
+ */
+static inline u64 get_dram_base(struct mem_ctl_info *mci)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return pvt->dram_base[pvt->mc_node_id];
+}
+
+/*
+ * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094)
+ * for the node represented by mci. Info is passed back in *hole_base,
+ * *hole_offset, and *hole_size.  Function returns 0 if info is valid or 1 if
+ * info is invalid. Info may be invalid for either of the following reasons:
+ *
+ * - The revision of the node is not E or greater.  In this case, the DRAM Hole
+ *   Address Register does not exist.
+ *
+ * - The DramHoleValid bit is cleared in the DRAM Hole Address Register,
+ *   indicating that its contents are not valid.
+ *
+ * The values passed back in *hole_base, *hole_offset, and *hole_size are
+ * complete 32-bit values despite the fact that the bitfields in the DHAR
+ * only represent bits 31-24 of the base and offset values.
+ */
+int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
+			     u64 *hole_offset, u64 *hole_size)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u64 base;
+
+	/* only revE and later have the DRAM Hole Address Register */
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_E) {
+		debugf1("  revision %d for node %d does not support DHAR\n",
+			pvt->ext_model, pvt->mc_node_id);
+		return 1;
+	}
+
+	/* only valid for Fam10h */
+	if (boot_cpu_data.x86 == 0x10 &&
+	    (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) {
+		debugf1("  Dram Memory Hoisting is DISABLED on this system\n");
+		return 1;
+	}
+
+	if ((pvt->dhar & DHAR_VALID) == 0) {
+		debugf1("  Dram Memory Hoisting is DISABLED on this node %d\n",
+			pvt->mc_node_id);
+		return 1;
+	}
+
+	/* This node has Memory Hoisting */
+
+	/* +------------------+--------------------+--------------------+-----
+	 * | memory           | DRAM hole          | relocated          |
+	 * | [0, (x - 1)]     | [x, 0xffffffff]    | addresses from     |
+	 * |                  |                    | DRAM hole          |
+	 * |                  |                    | [0x100000000,      |
+	 * |                  |                    |  (0x100000000+     |
+	 * |                  |                    |   (0xffffffff-x))] |
+	 * +------------------+--------------------+--------------------+-----
+	 *
+	 * Above is a diagram of physical memory showing the DRAM hole and the
+	 * relocated addresses from the DRAM hole.  As shown, the DRAM hole
+	 * starts at address x (the base address) and extends through address
+	 * 0xffffffff.  The DRAM Hole Address Register (DHAR) relocates the
+	 * addresses in the hole so that they start at 0x100000000.
+	 */
+
+	base = dhar_base(pvt->dhar);
+
+	*hole_base = base;
+	*hole_size = (0x1ull << 32) - base;
+
+	if (boot_cpu_data.x86 > 0xf)
+		*hole_offset = f10_dhar_offset(pvt->dhar);
+	else
+		*hole_offset = k8_dhar_offset(pvt->dhar);
+
+	debugf1("  DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n",
+		pvt->mc_node_id, (unsigned long)*hole_base,
+		(unsigned long)*hole_offset, (unsigned long)*hole_size);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info);
+
+/*
+ * Return the DramAddr that the SysAddr given by @sys_addr maps to.  It is
+ * assumed that sys_addr maps to the node given by mci.
+ *
+ * The first part of section 3.4.4 (p. 70) shows how the DRAM Base (section
+ * 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers are used to translate a
+ * SysAddr to a DramAddr. If the DRAM Hole Address Register (DHAR) is enabled,
+ * then it is also involved in translating a SysAddr to a DramAddr. Sections
+ * 3.4.8 and 3.5.8.2 describe the DHAR and how it is used for memory hoisting.
+ * These parts of the documentation are unclear. I interpret them as follows:
+ *
+ * When node n receives a SysAddr, it processes the SysAddr as follows:
+ *
+ * 1. It extracts the DRAMBase and DRAMLimit values from the DRAM Base and DRAM
+ *    Limit registers for node n. If the SysAddr is not within the range
+ *    specified by the base and limit values, then node n ignores the Sysaddr
+ *    (since it does not map to node n). Otherwise continue to step 2 below.
+ *
+ * 2. If the DramHoleValid bit of the DHAR for node n is clear, the DHAR is
+ *    disabled so skip to step 3 below. Otherwise see if the SysAddr is within
+ *    the range of relocated addresses (starting at 0x100000000) from the DRAM
+ *    hole. If not, skip to step 3 below. Else get the value of the
+ *    DramHoleOffset field from the DHAR. To obtain the DramAddr, subtract the
+ *    offset defined by this value from the SysAddr.
+ *
+ * 3. Obtain the base address for node n from the DRAMBase field of the DRAM
+ *    Base register for node n. To obtain the DramAddr, subtract the base
+ *    address from the SysAddr, as shown near the start of section 3.4.4 (p.70).
+ */
+static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr)
+{
+	u64 dram_base, hole_base, hole_offset, hole_size, dram_addr;
+	int ret = 0;
+
+	dram_base = get_dram_base(mci);
+
+	ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
+				      &hole_size);
+	if (!ret) {
+		if ((sys_addr >= (1ull << 32)) &&
+		    (sys_addr < ((1ull << 32) + hole_size))) {
+			/* use DHAR to translate SysAddr to DramAddr */
+			dram_addr = sys_addr - hole_offset;
+
+			debugf2("using DHAR to translate SysAddr 0x%lx to "
+				"DramAddr 0x%lx\n",
+				(unsigned long)sys_addr,
+				(unsigned long)dram_addr);
+
+			return dram_addr;
+		}
+	}
+
+	/*
+	 * Translate the SysAddr to a DramAddr as shown near the start of
+	 * section 3.4.4 (p. 70).  Although sys_addr is a 64-bit value, the k8
+	 * only deals with 40-bit values.  Therefore we discard bits 63-40 of
+	 * sys_addr below.  If bit 39 of sys_addr is 1 then the bits we
+	 * discard are all 1s.  Otherwise the bits we discard are all 0s.  See
+	 * section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture
+	 * Programmer's Manual Volume 1 Application Programming.
+	 */
+	dram_addr = (sys_addr & 0xffffffffffull) - dram_base;
+
+	debugf2("using DRAM Base register to translate SysAddr 0x%lx to "
+		"DramAddr 0x%lx\n", (unsigned long)sys_addr,
+		(unsigned long)dram_addr);
+	return dram_addr;
+}
+
+/*
+ * @intlv_en is the value of the IntlvEn field from a DRAM Base register
+ * (section 3.4.4.1).  Return the number of bits from a SysAddr that are used
+ * for node interleaving.
+ */
+static int num_node_interleave_bits(unsigned intlv_en)
+{
+	static const int intlv_shift_table[] = { 0, 1, 0, 2, 0, 0, 0, 3 };
+	int n;
+
+	BUG_ON(intlv_en > 7);
+	n = intlv_shift_table[intlv_en];
+	return n;
+}
+
+/* Translate the DramAddr given by @dram_addr to an InputAddr. */
+static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr)
+{
+	struct amd64_pvt *pvt;
+	int intlv_shift;
+	u64 input_addr;
+
+	pvt = mci->pvt_info;
+
+	/*
+	 * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
+	 * concerning translating a DramAddr to an InputAddr.
+	 */
+	intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]);
+	input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) +
+	    (dram_addr & 0xfff);
+
+	debugf2("  Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n",
+		intlv_shift, (unsigned long)dram_addr,
+		(unsigned long)input_addr);
+
+	return input_addr;
+}
+
+/*
+ * Translate the SysAddr represented by @sys_addr to an InputAddr.  It is
+ * assumed that @sys_addr maps to the node given by mci.
+ */
+static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr)
+{
+	u64 input_addr;
+
+	input_addr =
+	    dram_addr_to_input_addr(mci, sys_addr_to_dram_addr(mci, sys_addr));
+
+	debugf2("SysAdddr 0x%lx translates to InputAddr 0x%lx\n",
+		(unsigned long)sys_addr, (unsigned long)input_addr);
+
+	return input_addr;
+}
+
+
+/*
+ * @input_addr is an InputAddr associated with the node represented by mci.
+ * Translate @input_addr to a DramAddr and return the result.
+ */
+static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
+{
+	struct amd64_pvt *pvt;
+	int node_id, intlv_shift;
+	u64 bits, dram_addr;
+	u32 intlv_sel;
+
+	/*
+	 * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
+	 * shows how to translate a DramAddr to an InputAddr. Here we reverse
+	 * this procedure. When translating from a DramAddr to an InputAddr, the
+	 * bits used for node interleaving are discarded.  Here we recover these
+	 * bits from the IntlvSel field of the DRAM Limit register (section
+	 * 3.4.4.2) for the node that input_addr is associated with.
+	 */
+	pvt = mci->pvt_info;
+	node_id = pvt->mc_node_id;
+	BUG_ON((node_id < 0) || (node_id > 7));
+
+	intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]);
+
+	if (intlv_shift == 0) {
+		debugf1("    InputAddr 0x%lx translates to DramAddr of "
+			"same value\n",	(unsigned long)input_addr);
+
+		return input_addr;
+	}
+
+	bits = ((input_addr & 0xffffff000ull) << intlv_shift) +
+	    (input_addr & 0xfff);
+
+	intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1);
+	dram_addr = bits + (intlv_sel << 12);
+
+	debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx "
+		"(%d node interleave bits)\n", (unsigned long)input_addr,
+		(unsigned long)dram_addr, intlv_shift);
+
+	return dram_addr;
+}
+
+/*
+ * @dram_addr is a DramAddr that maps to the node represented by mci. Convert
+ * @dram_addr to a SysAddr.
+ */
+static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u64 hole_base, hole_offset, hole_size, base, limit, sys_addr;
+	int ret = 0;
+
+	ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
+				      &hole_size);
+	if (!ret) {
+		if ((dram_addr >= hole_base) &&
+		    (dram_addr < (hole_base + hole_size))) {
+			sys_addr = dram_addr + hole_offset;
+
+			debugf1("using DHAR to translate DramAddr 0x%lx to "
+				"SysAddr 0x%lx\n", (unsigned long)dram_addr,
+				(unsigned long)sys_addr);
+
+			return sys_addr;
+		}
+	}
+
+	amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit);
+	sys_addr = dram_addr + base;
+
+	/*
+	 * The sys_addr we have computed up to this point is a 40-bit value
+	 * because the k8 deals with 40-bit values.  However, the value we are
+	 * supposed to return is a full 64-bit physical address.  The AMD
+	 * x86-64 architecture specifies that the most significant implemented
+	 * address bit through bit 63 of a physical address must be either all
+	 * 0s or all 1s.  Therefore we sign-extend the 40-bit sys_addr to a
+	 * 64-bit value below.  See section 3.4.2 of AMD publication 24592:
+	 * AMD x86-64 Architecture Programmer's Manual Volume 1 Application
+	 * Programming.
+	 */
+	sys_addr |= ~((sys_addr & (1ull << 39)) - 1);
+
+	debugf1("    Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n",
+		pvt->mc_node_id, (unsigned long)dram_addr,
+		(unsigned long)sys_addr);
+
+	return sys_addr;
+}
+
+/*
+ * @input_addr is an InputAddr associated with the node given by mci. Translate
+ * @input_addr to a SysAddr.
+ */
+static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci,
+					 u64 input_addr)
+{
+	return dram_addr_to_sys_addr(mci,
+				     input_addr_to_dram_addr(mci, input_addr));
+}
+
+/*
+ * Find the minimum and maximum InputAddr values that map to the given @csrow.
+ * Pass back these values in *input_addr_min and *input_addr_max.
+ */
+static void find_csrow_limits(struct mem_ctl_info *mci, int csrow,
+			      u64 *input_addr_min, u64 *input_addr_max)
+{
+	struct amd64_pvt *pvt;
+	u64 base, mask;
+
+	pvt = mci->pvt_info;
+	BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT));
+
+	base = base_from_dct_base(pvt, csrow);
+	mask = mask_from_dct_mask(pvt, csrow);
+
+	*input_addr_min = base & ~mask;
+	*input_addr_max = base | mask | pvt->dcs_mask_notused;
+}
+
+/*
+ * Extract error address from MCA NB Address Low (section 3.6.4.5) and MCA NB
+ * Address High (section 3.6.4.6) register values and return the result. Address
+ * is located in the info structure (nbeah and nbeal), the encoding is device
+ * specific.
+ */
+static u64 extract_error_address(struct mem_ctl_info *mci,
+				 struct amd64_error_info_regs *info)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return pvt->ops->get_error_address(mci, info);
+}
+
+
+/* Map the Error address to a PAGE and PAGE OFFSET. */
+static inline void error_address_to_page_and_offset(u64 error_address,
+						    u32 *page, u32 *offset)
+{
+	*page = (u32) (error_address >> PAGE_SHIFT);
+	*offset = ((u32) error_address) & ~PAGE_MASK;
+}
+
+/*
+ * @sys_addr is an error address (a SysAddr) extracted from the MCA NB Address
+ * Low (section 3.6.4.5) and MCA NB Address High (section 3.6.4.6) registers
+ * of a node that detected an ECC memory error.  mci represents the node that
+ * the error address maps to (possibly different from the node that detected
+ * the error).  Return the number of the csrow that sys_addr maps to, or -1 on
+ * error.
+ */
+static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
+{
+	int csrow;
+
+	csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr));
+
+	if (csrow == -1)
+		amd64_mc_printk(mci, KERN_ERR,
+			     "Failed to translate InputAddr to csrow for "
+			     "address 0x%lx\n", (unsigned long)sys_addr);
+	return csrow;
+}
+
+static int get_channel_from_ecc_syndrome(unsigned short syndrome);
+
+static void amd64_cpu_display_info(struct amd64_pvt *pvt)
+{
+	if (boot_cpu_data.x86 == 0x11)
+		edac_printk(KERN_DEBUG, EDAC_MC, "F11h CPU detected\n");
+	else if (boot_cpu_data.x86 == 0x10)
+		edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n");
+	else if (boot_cpu_data.x86 == 0xf)
+		edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n",
+			(pvt->ext_model >= OPTERON_CPU_REV_F) ?
+			"Rev F or later" : "Rev E or earlier");
+	else
+		/* we'll hardly ever ever get here */
+		edac_printk(KERN_ERR, EDAC_MC, "Unknown cpu!\n");
+}
+
+/*
+ * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs
+ * are ECC capable.
+ */
+static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
+{
+	int bit;
+	enum dev_type edac_cap = EDAC_NONE;
+
+	bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
+		? 19
+		: 17;
+
+	if (pvt->dclr0 >> BIT(bit))
+		edac_cap = EDAC_FLAG_SECDED;
+
+	return edac_cap;
+}
+
+
+static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt,
+					 int ganged);
+
+/* Display and decode various NB registers for debug purposes. */
+static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
+{
+	int ganged;
+
+	debugf1("  nbcap:0x%8.08x DctDualCap=%s DualNode=%s 8-Node=%s\n",
+		pvt->nbcap,
+		(pvt->nbcap & K8_NBCAP_DCT_DUAL) ? "True" : "False",
+		(pvt->nbcap & K8_NBCAP_DUAL_NODE) ? "True" : "False",
+		(pvt->nbcap & K8_NBCAP_8_NODE) ? "True" : "False");
+	debugf1("    ECC Capable=%s   ChipKill Capable=%s\n",
+		(pvt->nbcap & K8_NBCAP_SECDED) ? "True" : "False",
+		(pvt->nbcap & K8_NBCAP_CHIPKILL) ? "True" : "False");
+	debugf1("  DramCfg0-low=0x%08x DIMM-ECC=%s Parity=%s Width=%s\n",
+		pvt->dclr0,
+		(pvt->dclr0 & BIT(19)) ?  "Enabled" : "Disabled",
+		(pvt->dclr0 & BIT(8)) ?  "Enabled" : "Disabled",
+		(pvt->dclr0 & BIT(11)) ?  "128b" : "64b");
+	debugf1("    DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s  DIMM Type=%s\n",
+		(pvt->dclr0 & BIT(12)) ?  "Y" : "N",
+		(pvt->dclr0 & BIT(13)) ?  "Y" : "N",
+		(pvt->dclr0 & BIT(14)) ?  "Y" : "N",
+		(pvt->dclr0 & BIT(15)) ?  "Y" : "N",
+		(pvt->dclr0 & BIT(16)) ?  "UN-Buffered" : "Buffered");
+
+
+	debugf1("  online-spare: 0x%8.08x\n", pvt->online_spare);
+
+	if (boot_cpu_data.x86 == 0xf) {
+		debugf1("  dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n",
+			pvt->dhar, dhar_base(pvt->dhar),
+			k8_dhar_offset(pvt->dhar));
+		debugf1("      DramHoleValid=%s\n",
+			(pvt->dhar & DHAR_VALID) ?  "True" : "False");
+
+		debugf1("  dbam-dkt: 0x%8.08x\n", pvt->dbam0);
+
+		/* everything below this point is Fam10h and above */
+		return;
+
+	} else {
+		debugf1("  dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n",
+			pvt->dhar, dhar_base(pvt->dhar),
+			f10_dhar_offset(pvt->dhar));
+		debugf1("    DramMemHoistValid=%s DramHoleValid=%s\n",
+			(pvt->dhar & F10_DRAM_MEM_HOIST_VALID) ?
+			"True" : "False",
+			(pvt->dhar & DHAR_VALID) ?
+			"True" : "False");
+	}
+
+	/* Only if NOT ganged does dcl1 have valid info */
+	if (!dct_ganging_enabled(pvt)) {
+		debugf1("  DramCfg1-low=0x%08x DIMM-ECC=%s Parity=%s "
+			"Width=%s\n", pvt->dclr1,
+			(pvt->dclr1 & BIT(19)) ?  "Enabled" : "Disabled",
+			(pvt->dclr1 & BIT(8)) ?  "Enabled" : "Disabled",
+			(pvt->dclr1 & BIT(11)) ?  "128b" : "64b");
+		debugf1("    DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s  "
+			"DIMM Type=%s\n",
+			(pvt->dclr1 & BIT(12)) ?  "Y" : "N",
+			(pvt->dclr1 & BIT(13)) ?  "Y" : "N",
+			(pvt->dclr1 & BIT(14)) ?  "Y" : "N",
+			(pvt->dclr1 & BIT(15)) ?  "Y" : "N",
+			(pvt->dclr1 & BIT(16)) ?  "UN-Buffered" : "Buffered");
+	}
+
+	/*
+	 * Determine if ganged and then dump memory sizes for first controller,
+	 * and if NOT ganged dump info for 2nd controller.
+	 */
+	ganged = dct_ganging_enabled(pvt);
+
+	f10_debug_display_dimm_sizes(0, pvt, ganged);
+
+	if (!ganged)
+		f10_debug_display_dimm_sizes(1, pvt, ganged);
+}
+
+/* Read in both of DBAM registers */
+static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
+{
+	int err = 0;
+	unsigned int reg;
+
+	reg = DBAM0;
+	err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dbam0);
+	if (err)
+		goto err_reg;
+
+	if (boot_cpu_data.x86 >= 0x10) {
+		reg = DBAM1;
+		err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dbam1);
+
+		if (err)
+			goto err_reg;
+	}
+
+err_reg:
+	debugf0("Error reading F2x%03x.\n", reg);
+}
+
+/*
+ * NOTE: CPU Revision Dependent code: Rev E and Rev F
+ *
+ * Set the DCSB and DCSM mask values depending on the CPU revision value. Also
+ * set the shift factor for the DCSB and DCSM values.
+ *
+ * ->dcs_mask_notused, RevE:
+ *
+ * To find the max InputAddr for the csrow, start with the base address and set
+ * all bits that are "don't care" bits in the test at the start of section
+ * 3.5.4 (p. 84).
+ *
+ * The "don't care" bits are all set bits in the mask and all bits in the gaps
+ * between bit ranges [35:25] and [19:13]. The value REV_E_DCS_NOTUSED_BITS
+ * represents bits [24:20] and [12:0], which are all bits in the above-mentioned
+ * gaps.
+ *
+ * ->dcs_mask_notused, RevF and later:
+ *
+ * To find the max InputAddr for the csrow, start with the base address and set
+ * all bits that are "don't care" bits in the test at the start of NPT section
+ * 4.5.4 (p. 87).
+ *
+ * The "don't care" bits are all set bits in the mask and all bits in the gaps
+ * between bit ranges [36:27] and [21:13].
+ *
+ * The value REV_F_F1Xh_DCS_NOTUSED_BITS represents bits [26:22] and [12:0],
+ * which are all bits in the above-mentioned gaps.
+ */
+static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
+{
+	if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+		pvt->dcsb_base		= REV_F_F1Xh_DCSB_BASE_BITS;
+		pvt->dcsm_mask		= REV_F_F1Xh_DCSM_MASK_BITS;
+		pvt->dcs_mask_notused	= REV_F_F1Xh_DCS_NOTUSED_BITS;
+		pvt->dcs_shift		= REV_F_F1Xh_DCS_SHIFT;
+
+		switch (boot_cpu_data.x86) {
+		case 0xf:
+			pvt->num_dcsm = REV_F_DCSM_COUNT;
+			break;
+
+		case 0x10:
+			pvt->num_dcsm = F10_DCSM_COUNT;
+			break;
+
+		case 0x11:
+			pvt->num_dcsm = F11_DCSM_COUNT;
+			break;
+
+		default:
+			amd64_printk(KERN_ERR, "Unsupported family!\n");
+			break;
+		}
+	} else {
+		pvt->dcsb_base		= REV_E_DCSB_BASE_BITS;
+		pvt->dcsm_mask		= REV_E_DCSM_MASK_BITS;
+		pvt->dcs_mask_notused	= REV_E_DCS_NOTUSED_BITS;
+		pvt->dcs_shift		= REV_E_DCS_SHIFT;
+		pvt->num_dcsm		= REV_E_DCSM_COUNT;
+	}
+}
+
+/*
+ * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask hw registers
+ */
+static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
+{
+	int cs, reg, err = 0;
+
+	amd64_set_dct_base_and_mask(pvt);
+
+	for (cs = 0; cs < CHIPSELECT_COUNT; cs++) {
+		reg = K8_DCSB0 + (cs * 4);
+		err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
+						&pvt->dcsb0[cs]);
+		if (unlikely(err))
+			debugf0("Reading K8_DCSB0[%d] failed\n", cs);
+		else
+			debugf0("  DCSB0[%d]=0x%08x reg: F2x%x\n",
+				cs, pvt->dcsb0[cs], reg);
+
+		/* If DCT are NOT ganged, then read in DCT1's base */
+		if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) {
+			reg = F10_DCSB1 + (cs * 4);
+			err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
+							&pvt->dcsb1[cs]);
+			if (unlikely(err))
+				debugf0("Reading F10_DCSB1[%d] failed\n", cs);
+			else
+				debugf0("  DCSB1[%d]=0x%08x reg: F2x%x\n",
+					cs, pvt->dcsb1[cs], reg);
+		} else {
+			pvt->dcsb1[cs] = 0;
+		}
+	}
+
+	for (cs = 0; cs < pvt->num_dcsm; cs++) {
+		reg = K8_DCSB0 + (cs * 4);
+		err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
+					&pvt->dcsm0[cs]);
+		if (unlikely(err))
+			debugf0("Reading K8_DCSM0 failed\n");
+		else
+			debugf0("    DCSM0[%d]=0x%08x reg: F2x%x\n",
+				cs, pvt->dcsm0[cs], reg);
+
+		/* If DCT are NOT ganged, then read in DCT1's mask */
+		if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) {
+			reg = F10_DCSM1 + (cs * 4);
+			err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
+					&pvt->dcsm1[cs]);
+			if (unlikely(err))
+				debugf0("Reading F10_DCSM1[%d] failed\n", cs);
+			else
+				debugf0("    DCSM1[%d]=0x%08x reg: F2x%x\n",
+					cs, pvt->dcsm1[cs], reg);
+		} else
+			pvt->dcsm1[cs] = 0;
+	}
+}
+
+static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt)
+{
+	enum mem_type type;
+
+	if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= OPTERON_CPU_REV_F) {
+		/* Rev F and later */
+		type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
+	} else {
+		/* Rev E and earlier */
+		type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+	}
+
+	debugf1("  Memory type is: %s\n",
+		(type == MEM_DDR2) ? "MEM_DDR2" :
+		(type == MEM_RDDR2) ? "MEM_RDDR2" :
+		(type == MEM_DDR) ? "MEM_DDR" : "MEM_RDDR");
+
+	return type;
+}
+
+/*
+ * Read the DRAM Configuration Low register. It differs between CG, D & E revs
+ * and the later RevF memory controllers (DDR vs DDR2)
+ *
+ * Return:
+ *      number of memory channels in operation
+ * Pass back:
+ *      contents of the DCL0_LOW register
+ */
+static int k8_early_channel_count(struct amd64_pvt *pvt)
+{
+	int flag, err = 0;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+	if (err)
+		return err;
+
+	if ((boot_cpu_data.x86_model >> 4) >= OPTERON_CPU_REV_F) {
+		/* RevF (NPT) and later */
+		flag = pvt->dclr0 & F10_WIDTH_128;
+	} else {
+		/* RevE and earlier */
+		flag = pvt->dclr0 & REVE_WIDTH_128;
+	}
+
+	/* not used */
+	pvt->dclr1 = 0;
+
+	return (flag) ? 2 : 1;
+}
+
+/* extract the ERROR ADDRESS for the K8 CPUs */
+static u64 k8_get_error_address(struct mem_ctl_info *mci,
+				struct amd64_error_info_regs *info)
+{
+	return (((u64) (info->nbeah & 0xff)) << 32) +
+			(info->nbeal & ~0x03);
+}
+
+/*
+ * Read the Base and Limit registers for K8 based Memory controllers; extract
+ * fields from the 'raw' reg into separate data fields
+ *
+ * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN
+ */
+static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+{
+	u32 low;
+	u32 off = dram << 3;	/* 8 bytes between DRAM entries */
+	int err;
+
+	err = pci_read_config_dword(pvt->addr_f1_ctl,
+				    K8_DRAM_BASE_LOW + off, &low);
+	if (err)
+		debugf0("Reading K8_DRAM_BASE_LOW failed\n");
+
+	/* Extract parts into separate data entries */
+	pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
+	pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
+	pvt->dram_rw_en[dram] = (low & 0x3);
+
+	err = pci_read_config_dword(pvt->addr_f1_ctl,
+				    K8_DRAM_LIMIT_LOW + off, &low);
+	if (err)
+		debugf0("Reading K8_DRAM_LIMIT_LOW failed\n");
+
+	/*
+	 * Extract parts into separate data entries. Limit is the HIGHEST memory
+	 * location of the region, so lower 24 bits need to be all ones
+	 */
+	pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF;
+	pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7;
+	pvt->dram_DstNode[dram] = (low & 0x7);
+}
+
+static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
+					struct amd64_error_info_regs *info,
+					u64 SystemAddress)
+{
+	struct mem_ctl_info *src_mci;
+	unsigned short syndrome;
+	int channel, csrow;
+	u32 page, offset;
+
+	/* Extract the syndrome parts and form a 16-bit syndrome */
+	syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
+	syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
+
+	/* CHIPKILL enabled */
+	if (info->nbcfg & K8_NBCFG_CHIPKILL) {
+		channel = get_channel_from_ecc_syndrome(syndrome);
+		if (channel < 0) {
+			/*
+			 * Syndrome didn't map, so we don't know which of the
+			 * 2 DIMMs is in error. So we need to ID 'both' of them
+			 * as suspect.
+			 */
+			amd64_mc_printk(mci, KERN_WARNING,
+				       "unknown syndrome 0x%x - possible error "
+				       "reporting race\n", syndrome);
+			edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
+			return;
+		}
+	} else {
+		/*
+		 * non-chipkill ecc mode
+		 *
+		 * The k8 documentation is unclear about how to determine the
+		 * channel number when using non-chipkill memory.  This method
+		 * was obtained from email communication with someone at AMD.
+		 * (Wish the email was placed in this comment - norsk)
+		 */
+		channel = ((SystemAddress & BIT(3)) != 0);
+	}
+
+	/*
+	 * Find out which node the error address belongs to. This may be
+	 * different from the node that detected the error.
+	 */
+	src_mci = find_mc_by_sys_addr(mci, SystemAddress);
+	if (src_mci) {
+		amd64_mc_printk(mci, KERN_ERR,
+			     "failed to map error address 0x%lx to a node\n",
+			     (unsigned long)SystemAddress);
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
+		return;
+	}
+
+	/* Now map the SystemAddress to a CSROW */
+	csrow = sys_addr_to_csrow(src_mci, SystemAddress);
+	if (csrow < 0) {
+		edac_mc_handle_ce_no_info(src_mci, EDAC_MOD_STR);
+	} else {
+		error_address_to_page_and_offset(SystemAddress, &page, &offset);
+
+		edac_mc_handle_ce(src_mci, page, offset, syndrome, csrow,
+				  channel, EDAC_MOD_STR);
+	}
+}
+
+/*
+ * determrine the number of PAGES in for this DIMM's size based on its DRAM
+ * Address Mapping.
+ *
+ * First step is to calc the number of bits to shift a value of 1 left to
+ * indicate show many pages. Start with the DBAM value as the starting bits,
+ * then proceed to adjust those shift bits, based on CPU rev and the table.
+ * See BKDG on the DBAM
+ */
+static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+{
+	int nr_pages;
+
+	if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+		nr_pages = 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
+	} else {
+		/*
+		 * RevE and less section; this line is tricky. It collapses the
+		 * table used by RevD and later to one that matches revisions CG
+		 * and earlier.
+		 */
+		dram_map -= (pvt->ext_model >= OPTERON_CPU_REV_D) ?
+				(dram_map > 8 ? 4 : (dram_map > 5 ?
+				3 : (dram_map > 2 ? 1 : 0))) : 0;
+
+		/* 25 shift is 32MiB minimum DIMM size in RevE and prior */
+		nr_pages = 1 << (dram_map + 25 - PAGE_SHIFT);
+	}
+
+	return nr_pages;
+}
+
+/*
+ * Get the number of DCT channels in use.
+ *
+ * Return:
+ *	number of Memory Channels in operation
+ * Pass back:
+ *	contents of the DCL0_LOW register
+ */
+static int f10_early_channel_count(struct amd64_pvt *pvt)
+{
+	int err = 0, channels = 0;
+	u32 dbam;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+	if (err)
+		goto err_reg;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
+	if (err)
+		goto err_reg;
+
+	/* If we are in 128 bit mode, then we are using 2 channels */
+	if (pvt->dclr0 & F10_WIDTH_128) {
+		debugf0("Data WIDTH is 128 bits - 2 channels\n");
+		channels = 2;
+		return channels;
+	}
+
+	/*
+	 * Need to check if in UN-ganged mode: In such, there are 2 channels,
+	 * but they are NOT in 128 bit mode and thus the above 'dcl0' status bit
+	 * will be OFF.
+	 *
+	 * Need to check DCT0[0] and DCT1[0] to see if only one of them has
+	 * their CSEnable bit on. If so, then SINGLE DIMM case.
+	 */
+	debugf0("Data WIDTH is NOT 128 bits - need more decoding\n");
+
+	/*
+	 * Check DRAM Bank Address Mapping values for each DIMM to see if there
+	 * is more than just one DIMM present in unganged mode. Need to check
+	 * both controllers since DIMMs can be placed in either one.
+	 */
+	channels = 0;
+	err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam);
+	if (err)
+		goto err_reg;
+
+	if (DBAM_DIMM(0, dbam) > 0)
+		channels++;
+	if (DBAM_DIMM(1, dbam) > 0)
+		channels++;
+	if (DBAM_DIMM(2, dbam) > 0)
+		channels++;
+	if (DBAM_DIMM(3, dbam) > 0)
+		channels++;
+
+	/* If more than 2 DIMMs are present, then we have 2 channels */
+	if (channels > 2)
+		channels = 2;
+	else if (channels == 0) {
+		/* No DIMMs on DCT0, so look at DCT1 */
+		err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM1, &dbam);
+		if (err)
+			goto err_reg;
+
+		if (DBAM_DIMM(0, dbam) > 0)
+			channels++;
+		if (DBAM_DIMM(1, dbam) > 0)
+			channels++;
+		if (DBAM_DIMM(2, dbam) > 0)
+			channels++;
+		if (DBAM_DIMM(3, dbam) > 0)
+			channels++;
+
+		if (channels > 2)
+			channels = 2;
+	}
+
+	/* If we found ALL 0 values, then assume just ONE DIMM-ONE Channel */
+	if (channels == 0)
+		channels = 1;
+
+	debugf0("DIMM count= %d\n", channels);
+
+	return channels;
+
+err_reg:
+	return -1;
+
+}
+
+static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+{
+	return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
+}
+
+/* Enable extended configuration access via 0xCF8 feature */
+static void amd64_setup(struct amd64_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
+
+	pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG);
+	reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+	pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+}
+
+/* Restore the extended configuration access via 0xCF8 feature */
+static void amd64_teardown(struct amd64_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
+
+	reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+	if (pvt->flags.cf8_extcfg)
+		reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
+	pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+}
+
+static u64 f10_get_error_address(struct mem_ctl_info *mci,
+			struct amd64_error_info_regs *info)
+{
+	return (((u64) (info->nbeah & 0xffff)) << 32) +
+			(info->nbeal & ~0x01);
+}
+
+/*
+ * Read the Base and Limit registers for F10 based Memory controllers. Extract
+ * fields from the 'raw' reg into separate data fields.
+ *
+ * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN.
+ */
+static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+{
+	u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit;
+
+	low_offset = K8_DRAM_BASE_LOW + (dram << 3);
+	high_offset = F10_DRAM_BASE_HIGH + (dram << 3);
+
+	/* read the 'raw' DRAM BASE Address register */
+	pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_base);
+
+	/* Read from the ECS data register */
+	pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_base);
+
+	/* Extract parts into separate data entries */
+	pvt->dram_rw_en[dram] = (low_base & 0x3);
+
+	if (pvt->dram_rw_en[dram] == 0)
+		return;
+
+	pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
+
+	pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
+				((u64) low_base & 0xFFFF0000))) << 8;
+
+	low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
+	high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
+
+	/* read the 'raw' LIMIT registers */
+	pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_limit);
+
+	/* Read from the ECS data register for the HIGH portion */
+	pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_limit);
+
+	debugf0("  HW Regs: BASE=0x%08x-%08x      LIMIT=  0x%08x-%08x\n",
+		high_base, low_base, high_limit, low_limit);
+
+	pvt->dram_DstNode[dram] = (low_limit & 0x7);
+	pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7;
+
+	/*
+	 * Extract address values and form a LIMIT address. Limit is the HIGHEST
+	 * memory location of the region, so low 24 bits need to be all ones.
+	 */
+	low_limit |= 0x0000FFFF;
+	pvt->dram_limit[dram] =
+		((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+}
+
+static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
+{
+	int err = 0;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW,
+				    &pvt->dram_ctl_select_low);
+	if (err) {
+		debugf0("Reading F10_DCTL_SEL_LOW failed\n");
+	} else {
+		debugf0("DRAM_DCTL_SEL_LOW=0x%x  DctSelBaseAddr=0x%x\n",
+			pvt->dram_ctl_select_low, dct_sel_baseaddr(pvt));
+
+		debugf0("  DRAM DCTs are=%s DRAM Is=%s DRAM-Ctl-"
+				"sel-hi-range=%s\n",
+			(dct_ganging_enabled(pvt) ? "GANGED" : "NOT GANGED"),
+			(dct_dram_enabled(pvt) ? "Enabled"   : "Disabled"),
+			(dct_high_range_enabled(pvt) ? "Enabled" : "Disabled"));
+
+		debugf0("  DctDatIntLv=%s MemCleared=%s DctSelIntLvAddr=0x%x\n",
+			(dct_data_intlv_enabled(pvt) ? "Enabled" : "Disabled"),
+			(dct_memory_cleared(pvt) ? "True " : "False "),
+			dct_sel_interleave_addr(pvt));
+	}
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH,
+				    &pvt->dram_ctl_select_high);
+	if (err)
+		debugf0("Reading F10_DCTL_SEL_HIGH failed\n");
+}
+
+/*
+ * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory
+ * Interleaving Modes.
+ */
+static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+				int hi_range_sel, u32 intlv_en)
+{
+	u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1;
+
+	if (dct_ganging_enabled(pvt))
+		cs = 0;
+	else if (hi_range_sel)
+		cs = dct_sel_high;
+	else if (dct_interleave_enabled(pvt)) {
+		/*
+		 * see F2x110[DctSelIntLvAddr] - channel interleave mode
+		 */
+		if (dct_sel_interleave_addr(pvt) == 0)
+			cs = sys_addr >> 6 & 1;
+		else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) {
+			temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2;
+
+			if (dct_sel_interleave_addr(pvt) & 1)
+				cs = (sys_addr >> 9 & 1) ^ temp;
+			else
+				cs = (sys_addr >> 6 & 1) ^ temp;
+		} else if (intlv_en & 4)
+			cs = sys_addr >> 15 & 1;
+		else if (intlv_en & 2)
+			cs = sys_addr >> 14 & 1;
+		else if (intlv_en & 1)
+			cs = sys_addr >> 13 & 1;
+		else
+			cs = sys_addr >> 12 & 1;
+	} else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt))
+		cs = ~dct_sel_high & 1;
+	else
+		cs = 0;
+
+	return cs;
+}
+
+static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en)
+{
+	if (intlv_en == 1)
+		return 1;
+	else if (intlv_en == 3)
+		return 2;
+	else if (intlv_en == 7)
+		return 3;
+
+	return 0;
+}
+
+/* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */
+static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
+						 u32 dct_sel_base_addr,
+						 u64 dct_sel_base_off,
+						 u32 hole_valid, u32 hole_off,
+						 u64 dram_base)
+{
+	u64 chan_off;
+
+	if (hi_range_sel) {
+		if (!(dct_sel_base_addr & 0xFFFFF800) &&
+		   hole_valid && (sys_addr >= 0x100000000ULL))
+			chan_off = hole_off << 16;
+		else
+			chan_off = dct_sel_base_off;
+	} else {
+		if (hole_valid && (sys_addr >= 0x100000000ULL))
+			chan_off = hole_off << 16;
+		else
+			chan_off = dram_base & 0xFFFFF8000000ULL;
+	}
+
+	return (sys_addr & 0x0000FFFFFFFFFFC0ULL) -
+			(chan_off & 0x0000FFFFFF800000ULL);
+}
+
+/* Hack for the time being - Can we get this from BIOS?? */
+#define	CH0SPARE_RANK	0
+#define	CH1SPARE_RANK	1
+
+/*
+ * checks if the csrow passed in is marked as SPARED, if so returns the new
+ * spare row
+ */
+static inline int f10_process_possible_spare(int csrow,
+				u32 cs, struct amd64_pvt *pvt)
+{
+	u32 swap_done;
+	u32 bad_dram_cs;
+
+	/* Depending on channel, isolate respective SPARING info */
+	if (cs) {
+		swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare);
+		bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare);
+		if (swap_done && (csrow == bad_dram_cs))
+			csrow = CH1SPARE_RANK;
+	} else {
+		swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare);
+		bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare);
+		if (swap_done && (csrow == bad_dram_cs))
+			csrow = CH0SPARE_RANK;
+	}
+	return csrow;
+}
+
+/*
+ * Iterate over the DRAM DCT "base" and "mask" registers looking for a
+ * SystemAddr match on the specified 'ChannelSelect' and 'NodeID'
+ *
+ * Return:
+ *	-EINVAL:  NOT FOUND
+ *	0..csrow = Chip-Select Row
+ */
+static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
+{
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+	u32 cs_base, cs_mask;
+	int cs_found = -EINVAL;
+	int csrow;
+
+	mci = mci_lookup[nid];
+	if (!mci)
+		return cs_found;
+
+	pvt = mci->pvt_info;
+
+	debugf1("InputAddr=0x%x  channelselect=%d\n", in_addr, cs);
+
+	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+
+		cs_base = amd64_get_dct_base(pvt, cs, csrow);
+		if (!(cs_base & K8_DCSB_CS_ENABLE))
+			continue;
+
+		/*
+		 * We have an ENABLED CSROW, Isolate just the MASK bits of the
+		 * target: [28:19] and [13:5], which map to [36:27] and [21:13]
+		 * of the actual address.
+		 */
+		cs_base &= REV_F_F1Xh_DCSB_BASE_BITS;
+
+		/*
+		 * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and
+		 * [4:0] to become ON. Then mask off bits [28:0] ([36:8])
+		 */
+		cs_mask = amd64_get_dct_mask(pvt, cs, csrow);
+
+		debugf1("    CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n",
+				csrow, cs_base, cs_mask);
+
+		cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF;
+
+		debugf1("              Final CSMask=0x%x\n", cs_mask);
+		debugf1("    (InputAddr & ~CSMask)=0x%x "
+				"(CSBase & ~CSMask)=0x%x\n",
+				(in_addr & ~cs_mask), (cs_base & ~cs_mask));
+
+		if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) {
+			cs_found = f10_process_possible_spare(csrow, cs, pvt);
+
+			debugf1(" MATCH csrow=%d\n", cs_found);
+			break;
+		}
+	}
+	return cs_found;
+}
+
+/* For a given @dram_range, check if @sys_addr falls within it. */
+static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
+				  u64 sys_addr, int *nid, int *chan_sel)
+{
+	int node_id, cs_found = -EINVAL, high_range = 0;
+	u32 intlv_en, intlv_sel, intlv_shift, hole_off;
+	u32 hole_valid, tmp, dct_sel_base, channel;
+	u64 dram_base, chan_addr, dct_sel_base_off;
+
+	dram_base = pvt->dram_base[dram_range];
+	intlv_en = pvt->dram_IntlvEn[dram_range];
+
+	node_id = pvt->dram_DstNode[dram_range];
+	intlv_sel = pvt->dram_IntlvSel[dram_range];
+
+	debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n",
+		dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]);
+
+	/*
+	 * This assumes that one node's DHAR is the same as all the other
+	 * nodes' DHAR.
+	 */
+	hole_off = (pvt->dhar & 0x0000FF80);
+	hole_valid = (pvt->dhar & 0x1);
+	dct_sel_base_off = (pvt->dram_ctl_select_high & 0xFFFFFC00) << 16;
+
+	debugf1("   HoleOffset=0x%x  HoleValid=0x%x IntlvSel=0x%x\n",
+			hole_off, hole_valid, intlv_sel);
+
+	if (intlv_en ||
+	    (intlv_sel != ((sys_addr >> 12) & intlv_en)))
+		return -EINVAL;
+
+	dct_sel_base = dct_sel_baseaddr(pvt);
+
+	/*
+	 * check whether addresses >= DctSelBaseAddr[47:27] are to be used to
+	 * select between DCT0 and DCT1.
+	 */
+	if (dct_high_range_enabled(pvt) &&
+	   !dct_ganging_enabled(pvt) &&
+	   ((sys_addr >> 27) >= (dct_sel_base >> 11)))
+		high_range = 1;
+
+	channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en);
+
+	chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base,
+					     dct_sel_base_off, hole_valid,
+					     hole_off, dram_base);
+
+	intlv_shift = f10_map_intlv_en_to_shift(intlv_en);
+
+	/* remove Node ID (in case of memory interleaving) */
+	tmp = chan_addr & 0xFC0;
+
+	chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp;
+
+	/* remove channel interleave and hash */
+	if (dct_interleave_enabled(pvt) &&
+	   !dct_high_range_enabled(pvt) &&
+	   !dct_ganging_enabled(pvt)) {
+		if (dct_sel_interleave_addr(pvt) != 1)
+			chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL;
+		else {
+			tmp = chan_addr & 0xFC0;
+			chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1)
+					| tmp;
+		}
+	}
+
+	debugf1("   (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n",
+		chan_addr, (u32)(chan_addr >> 8));
+
+	cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel);
+
+	if (cs_found >= 0) {
+		*nid = node_id;
+		*chan_sel = channel;
+	}
+	return cs_found;
+}
+
+static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
+				       int *node, int *chan_sel)
+{
+	int dram_range, cs_found = -EINVAL;
+	u64 dram_base, dram_limit;
+
+	for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) {
+
+		if (!pvt->dram_rw_en[dram_range])
+			continue;
+
+		dram_base = pvt->dram_base[dram_range];
+		dram_limit = pvt->dram_limit[dram_range];
+
+		if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) {
+
+			cs_found = f10_match_to_this_node(pvt, dram_range,
+							  sys_addr, node,
+							  chan_sel);
+			if (cs_found >= 0)
+				break;
+		}
+	}
+	return cs_found;
+}
+
+/*
+ * This the F10h reference code from AMD to map a @sys_addr to NodeID,
+ * CSROW, Channel.
+ *
+ * The @sys_addr is usually an error address received from the hardware.
+ */
+static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
+				     struct amd64_error_info_regs *info,
+				     u64 sys_addr)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 page, offset;
+	unsigned short syndrome;
+	int nid, csrow, chan = 0;
+
+	csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
+
+	if (csrow >= 0) {
+		error_address_to_page_and_offset(sys_addr, &page, &offset);
+
+		syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
+		syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
+
+		/*
+		 * Is CHIPKILL on? If so, then we can attempt to use the
+		 * syndrome to isolate which channel the error was on.
+		 */
+		if (pvt->nbcfg & K8_NBCFG_CHIPKILL)
+			chan = get_channel_from_ecc_syndrome(syndrome);
+
+		if (chan >= 0) {
+			edac_mc_handle_ce(mci, page, offset, syndrome,
+					csrow, chan, EDAC_MOD_STR);
+		} else {
+			/*
+			 * Channel unknown, report all channels on this
+			 * CSROW as failed.
+			 */
+			for (chan = 0; chan < mci->csrows[csrow].nr_channels;
+								chan++) {
+					edac_mc_handle_ce(mci, page, offset,
+							syndrome,
+							csrow, chan,
+							EDAC_MOD_STR);
+			}
+		}
+
+	} else {
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
+	}
+}
+
+/*
+ * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift
+ * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0
+ * indicates an empty DIMM slot, as reported by Hardware on empty slots.
+ *
+ * Normalize to 128MB by subracting 27 bit shift.
+ */
+static int map_dbam_to_csrow_size(int index)
+{
+	int mega_bytes = 0;
+
+	if (index > 0 && index <= DBAM_MAX_VALUE)
+		mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27)));
+
+	return mega_bytes;
+}
+
+/*
+ * debug routine to display the memory sizes of a DIMM (ganged or not) and it
+ * CSROWs as well
+ */
+static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt,
+					 int ganged)
+{
+	int dimm, size0, size1;
+	u32 dbam;
+	u32 *dcsb;
+
+	debugf1("  dbam%d: 0x%8.08x  CSROW is %s\n", ctrl,
+			ctrl ? pvt->dbam1 : pvt->dbam0,
+			ganged ? "GANGED - dbam1 not used" : "NON-GANGED");
+
+	dbam = ctrl ? pvt->dbam1 : pvt->dbam0;
+	dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0;
+
+	/* Dump memory sizes for DIMM and its CSROWs */
+	for (dimm = 0; dimm < 4; dimm++) {
+
+		size0 = 0;
+		if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE)
+			size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+
+		size1 = 0;
+		if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE)
+			size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+
+		debugf1("     CTRL-%d DIMM-%d=%5dMB   CSROW-%d=%5dMB "
+				"CSROW-%d=%5dMB\n",
+				ctrl,
+				dimm,
+				size0 + size1,
+				dimm * 2,
+				size0,
+				dimm * 2 + 1,
+				size1);
+	}
+}
+
+/*
+ * Very early hardware probe on pci_probe thread to determine if this module
+ * supports the hardware.
+ *
+ * Return:
+ *      0 for OK
+ *      1 for error
+ */
+static int f10_probe_valid_hardware(struct amd64_pvt *pvt)
+{
+	int ret = 0;
+
+	/*
+	 * If we are on a DDR3 machine, we don't know yet if
+	 * we support that properly at this time
+	 */
+	if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) ||
+	    (pvt->dchr1 & F10_DCHR_Ddr3Mode)) {
+
+		amd64_printk(KERN_WARNING,
+			"%s() This machine is running with DDR3 memory. "
+			"This is not currently supported. "
+			"DCHR0=0x%x DCHR1=0x%x\n",
+			__func__, pvt->dchr0, pvt->dchr1);
+
+		amd64_printk(KERN_WARNING,
+			"   Contact '%s' module MAINTAINER to help add"
+			" support.\n",
+			EDAC_MOD_STR);
+
+		ret = 1;
+
+	}
+	return ret;
+}
+
+/*
+ * There currently are 3 types type of MC devices for AMD Athlon/Opterons
+ * (as per PCI DEVICE_IDs):
+ *
+ * Family K8: That is the Athlon64 and Opteron CPUs. They all have the same PCI
+ * DEVICE ID, even though there is differences between the different Revisions
+ * (CG,D,E,F).
+ *
+ * Family F10h and F11h.
+ *
+ */
+static struct amd64_family_type amd64_family_types[] = {
+	[K8_CPUS] = {
+		.ctl_name = "RevF",
+		.addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+		.misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC,
+		.ops = {
+			.early_channel_count = k8_early_channel_count,
+			.get_error_address = k8_get_error_address,
+			.read_dram_base_limit = k8_read_dram_base_limit,
+			.map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
+			.dbam_map_to_pages = k8_dbam_map_to_pages,
+		}
+	},
+	[F10_CPUS] = {
+		.ctl_name = "Family 10h",
+		.addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP,
+		.misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC,
+		.ops = {
+			.probe_valid_hardware = f10_probe_valid_hardware,
+			.early_channel_count = f10_early_channel_count,
+			.get_error_address = f10_get_error_address,
+			.read_dram_base_limit = f10_read_dram_base_limit,
+			.read_dram_ctl_register = f10_read_dram_ctl_register,
+			.map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
+			.dbam_map_to_pages = f10_dbam_map_to_pages,
+		}
+	},
+	[F11_CPUS] = {
+		.ctl_name = "Family 11h",
+		.addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP,
+		.misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC,
+		.ops = {
+			.probe_valid_hardware = f10_probe_valid_hardware,
+			.early_channel_count = f10_early_channel_count,
+			.get_error_address = f10_get_error_address,
+			.read_dram_base_limit = f10_read_dram_base_limit,
+			.read_dram_ctl_register = f10_read_dram_ctl_register,
+			.map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
+			.dbam_map_to_pages = f10_dbam_map_to_pages,
+		}
+	},
+};
+
+static struct pci_dev *pci_get_related_function(unsigned int vendor,
+						unsigned int device,
+						struct pci_dev *related)
+{
+	struct pci_dev *dev = NULL;
+
+	dev = pci_get_device(vendor, device, dev);
+	while (dev) {
+		if ((dev->bus->number == related->bus->number) &&
+		    (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn)))
+			break;
+		dev = pci_get_device(vendor, device, dev);
+	}
+
+	return dev;
+}
+
+/*
+ * syndrome mapping table for ECC ChipKill devices
+ *
+ * The comment in each row is the token (nibble) number that is in error.
+ * The least significant nibble of the syndrome is the mask for the bits
+ * that are in error (need to be toggled) for the particular nibble.
+ *
+ * Each row contains 16 entries.
+ * The first entry (0th) is the channel number for that row of syndromes.
+ * The remaining 15 entries are the syndromes for the respective Error
+ * bit mask index.
+ *
+ * 1st index entry is 0x0001 mask, indicating that the rightmost bit is the
+ * bit in error.
+ * The 2nd index entry is 0x0010 that the second bit is damaged.
+ * The 3rd index entry is 0x0011 indicating that the rightmost 2 bits
+ * are damaged.
+ * Thus so on until index 15, 0x1111, whose entry has the syndrome
+ * indicating that all 4 bits are damaged.
+ *
+ * A search is performed on this table looking for a given syndrome.
+ *
+ * See the AMD documentation for ECC syndromes. This ECC table is valid
+ * across all the versions of the AMD64 processors.
+ *
+ * A fast lookup is to use the LAST four bits of the 16-bit syndrome as a
+ * COLUMN index, then search all ROWS of that column, looking for a match
+ * with the input syndrome. The ROW value will be the token number.
+ *
+ * The 0'th entry on that row, can be returned as the CHANNEL (0 or 1) of this
+ * error.
+ */
+#define NUMBER_ECC_ROWS  36
+static const unsigned short ecc_chipkill_syndromes[NUMBER_ECC_ROWS][16] = {
+	/* Channel 0 syndromes */
+	{/*0*/  0, 0xe821, 0x7c32, 0x9413, 0xbb44, 0x5365, 0xc776, 0x2f57,
+	   0xdd88, 0x35a9, 0xa1ba, 0x499b, 0x66cc, 0x8eed, 0x1afe, 0xf2df },
+	{/*1*/  0, 0x5d31, 0xa612, 0xfb23, 0x9584, 0xc8b5, 0x3396, 0x6ea7,
+	   0xeac8, 0xb7f9, 0x4cda, 0x11eb, 0x7f4c, 0x227d, 0xd95e, 0x846f },
+	{/*2*/  0, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
+	   0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f },
+	{/*3*/  0, 0x2021, 0x3032, 0x1013, 0x4044, 0x6065, 0x7076, 0x5057,
+	   0x8088, 0xa0a9, 0xb0ba, 0x909b, 0xc0cc, 0xe0ed, 0xf0fe, 0xd0df },
+	{/*4*/  0, 0x5041, 0xa082, 0xf0c3, 0x9054, 0xc015, 0x30d6, 0x6097,
+	   0xe0a8, 0xb0e9, 0x402a, 0x106b, 0x70fc, 0x20bd, 0xd07e, 0x803f },
+	{/*5*/  0, 0xbe21, 0xd732, 0x6913, 0x2144, 0x9f65, 0xf676, 0x4857,
+	   0x3288, 0x8ca9, 0xe5ba, 0x5b9b, 0x13cc, 0xaded, 0xc4fe, 0x7adf },
+	{/*6*/  0, 0x4951, 0x8ea2, 0xc7f3, 0x5394, 0x1ac5, 0xdd36, 0x9467,
+	   0xa1e8, 0xe8b9, 0x2f4a, 0x661b, 0xf27c, 0xbb2d, 0x7cde, 0x358f },
+	{/*7*/  0, 0x74e1, 0x9872, 0xec93, 0xd6b4, 0xa255, 0x4ec6, 0x3a27,
+	   0x6bd8, 0x1f39, 0xf3aa, 0x874b, 0xbd6c, 0xc98d, 0x251e, 0x51ff },
+	{/*8*/  0, 0x15c1, 0x2a42, 0x3f83, 0xcef4, 0xdb35, 0xe4b6, 0xf177,
+	   0x4758, 0x5299, 0x6d1a, 0x78db, 0x89ac, 0x9c6d, 0xa3ee, 0xb62f },
+	{/*9*/  0, 0x3d01, 0x1602, 0x2b03, 0x8504, 0xb805, 0x9306, 0xae07,
+	   0xca08, 0xf709, 0xdc0a, 0xe10b, 0x4f0c, 0x720d, 0x590e, 0x640f },
+	{/*a*/  0, 0x9801, 0xec02, 0x7403, 0x6b04, 0xf305, 0x8706, 0x1f07,
+	   0xbd08, 0x2509, 0x510a, 0xc90b, 0xd60c, 0x4e0d, 0x3a0e, 0xa20f },
+	{/*b*/  0, 0xd131, 0x6212, 0xb323, 0x3884, 0xe9b5, 0x5a96, 0x8ba7,
+	   0x1cc8, 0xcdf9, 0x7eda, 0xafeb, 0x244c, 0xf57d, 0x465e, 0x976f },
+	{/*c*/  0, 0xe1d1, 0x7262, 0x93b3, 0xb834, 0x59e5, 0xca56, 0x2b87,
+	   0xdc18, 0x3dc9, 0xae7a, 0x4fab, 0x542c, 0x85fd, 0x164e, 0xf79f },
+	{/*d*/  0, 0x6051, 0xb0a2, 0xd0f3, 0x1094, 0x70c5, 0xa036, 0xc067,
+	   0x20e8, 0x40b9, 0x904a, 0x601b, 0x307c, 0x502d, 0x80de, 0xe08f },
+	{/*e*/  0, 0xa4c1, 0xf842, 0x5c83, 0xe6f4, 0x4235, 0x1eb6, 0xba77,
+	   0x7b58, 0xdf99, 0x831a, 0x27db, 0x9dac, 0x396d, 0x65ee, 0xc12f },
+	{/*f*/  0, 0x11c1, 0x2242, 0x3383, 0xc8f4, 0xd935, 0xeab6, 0xfb77,
+	   0x4c58, 0x5d99, 0x6e1a, 0x7fdb, 0x84ac, 0x956d, 0xa6ee, 0xb72f },
+
+	/* Channel 1 syndromes */
+	{/*10*/ 1, 0x45d1, 0x8a62, 0xcfb3, 0x5e34, 0x1be5, 0xd456, 0x9187,
+	   0xa718, 0xe2c9, 0x2d7a, 0x68ab, 0xf92c, 0xbcfd, 0x734e, 0x369f },
+	{/*11*/ 1, 0x63e1, 0xb172, 0xd293, 0x14b4, 0x7755, 0xa5c6, 0xc627,
+	   0x28d8, 0x4b39, 0x99aa, 0xfa4b, 0x3c6c, 0x5f8d, 0x8d1e, 0xeeff },
+	{/*12*/ 1, 0xb741, 0xd982, 0x6ec3, 0x2254, 0x9515, 0xfbd6, 0x4c97,
+	   0x33a8, 0x84e9, 0xea2a, 0x5d6b, 0x11fc, 0xa6bd, 0xc87e, 0x7f3f },
+	{/*13*/ 1, 0xdd41, 0x6682, 0xbbc3, 0x3554, 0xe815, 0x53d6, 0xce97,
+	   0x1aa8, 0xc7e9, 0x7c2a, 0xa1fb, 0x2ffc, 0xf2bd, 0x497e, 0x943f },
+	{/*14*/ 1, 0x2bd1, 0x3d62, 0x16b3, 0x4f34, 0x64e5, 0x7256, 0x5987,
+	   0x8518, 0xaec9, 0xb87a, 0x93ab, 0xca2c, 0xe1fd, 0xf74e, 0xdc9f },
+	{/*15*/ 1, 0x83c1, 0xc142, 0x4283, 0xa4f4, 0x2735, 0x65b6, 0xe677,
+	   0xf858, 0x7b99, 0x391a, 0xbadb, 0x5cac, 0xdf6d, 0x9dee, 0x1e2f },
+	{/*16*/ 1, 0x8fd1, 0xc562, 0x4ab3, 0xa934, 0x26e5, 0x6c56, 0xe387,
+	   0xfe18, 0x71c9, 0x3b7a, 0xb4ab, 0x572c, 0xd8fd, 0x924e, 0x1d9f },
+	{/*17*/ 1, 0x4791, 0x89e2, 0xce73, 0x5264, 0x15f5, 0xdb86, 0x9c17,
+	   0xa3b8, 0xe429, 0x2a5a, 0x6dcb, 0xf1dc, 0xb64d, 0x783e, 0x3faf },
+	{/*18*/ 1, 0x5781, 0xa9c2, 0xfe43, 0x92a4, 0xc525, 0x3b66, 0x6ce7,
+	   0xe3f8, 0xb479, 0x4a3a, 0x1dbb, 0x715c, 0x26dd, 0xd89e, 0x8f1f },
+	{/*19*/ 1, 0xbf41, 0xd582, 0x6ac3, 0x2954, 0x9615, 0xfcd6, 0x4397,
+	   0x3ea8, 0x81e9, 0xeb2a, 0x546b, 0x17fc, 0xa8bd, 0xc27e, 0x7d3f },
+	{/*1a*/ 1, 0x9891, 0xe1e2, 0x7273, 0x6464, 0xf7f5, 0x8586, 0x1617,
+	   0xb8b8, 0x2b29, 0x595a, 0xcacb, 0xdcdc, 0x4f4d, 0x3d3e, 0xaeaf },
+	{/*1b*/ 1, 0xcce1, 0x4472, 0x8893, 0xfdb4, 0x3f55, 0xb9c6, 0x7527,
+	   0x56d8, 0x9a39, 0x12aa, 0xde4b, 0xab6c, 0x678d, 0xef1e, 0x23ff },
+	{/*1c*/ 1, 0xa761, 0xf9b2, 0x5ed3, 0xe214, 0x4575, 0x1ba6, 0xbcc7,
+	   0x7328, 0xd449, 0x8a9a, 0x2dfb, 0x913c, 0x365d, 0x688e, 0xcfef },
+	{/*1d*/ 1, 0xff61, 0x55b2, 0xaad3, 0x7914, 0x8675, 0x2ca6, 0xd3c7,
+	   0x9e28, 0x6149, 0xcb9a, 0x34fb, 0xe73c, 0x185d, 0xb28e, 0x4def },
+	{/*1e*/ 1, 0x5451, 0xa8a2, 0xfcf3, 0x9694, 0xc2c5, 0x3e36, 0x6a67,
+	   0xebe8, 0xbfb9, 0x434a, 0x171b, 0x7d7c, 0x292d, 0xd5de, 0x818f },
+	{/*1f*/ 1, 0x6fc1, 0xb542, 0xda83, 0x19f4, 0x7635, 0xacb6, 0xc377,
+	   0x2e58, 0x4199, 0x9b1a, 0xf4db, 0x37ac, 0x586d, 0x82ee, 0xed2f },
+
+	/* ECC bits are also in the set of tokens and they too can go bad
+	 * first 2 cover channel 0, while the second 2 cover channel 1
+	 */
+	{/*20*/ 0, 0xbe01, 0xd702, 0x6903, 0x2104, 0x9f05, 0xf606, 0x4807,
+	   0x3208, 0x8c09, 0xe50a, 0x5b0b, 0x130c, 0xad0d, 0xc40e, 0x7a0f },
+	{/*21*/ 0, 0x4101, 0x8202, 0xc303, 0x5804, 0x1905, 0xda06, 0x9b07,
+	   0xac08, 0xed09, 0x2e0a, 0x6f0b, 0x640c, 0xb50d, 0x760e, 0x370f },
+	{/*22*/ 1, 0xc441, 0x4882, 0x8cc3, 0xf654, 0x3215, 0xbed6, 0x7a97,
+	   0x5ba8, 0x9fe9, 0x132a, 0xd76b, 0xadfc, 0x69bd, 0xe57e, 0x213f },
+	{/*23*/ 1, 0x7621, 0x9b32, 0xed13, 0xda44, 0xac65, 0x4176, 0x3757,
+	   0x6f88, 0x19a9, 0xf4ba, 0x829b, 0xb5cc, 0xc3ed, 0x2efe, 0x58df }
+};
+
+/*
+ * Given the syndrome argument, scan each of the channel tables for a syndrome
+ * match. Depending on which table it is found, return the channel number.
+ */
+static int get_channel_from_ecc_syndrome(unsigned short syndrome)
+{
+	int row;
+	int column;
+
+	/* Determine column to scan */
+	column = syndrome & 0xF;
+
+	/* Scan all rows, looking for syndrome, or end of table */
+	for (row = 0; row < NUMBER_ECC_ROWS; row++) {
+		if (ecc_chipkill_syndromes[row][column] == syndrome)
+			return ecc_chipkill_syndromes[row][0];
+	}
+
+	debugf0("syndrome(%x) not found\n", syndrome);
+	return -1;
+}
+
+/*
+ * Check for valid error in the NB Status High register. If so, proceed to read
+ * NB Status Low, NB Address Low and NB Address High registers and store data
+ * into error structure.
+ *
+ * Returns:
+ *	- 1: if hardware regs contains valid error info
+ *	- 0: if no valid error is indicated
+ */
+static int amd64_get_error_info_regs(struct mem_ctl_info *mci,
+				     struct amd64_error_info_regs *regs)
+{
+	struct amd64_pvt *pvt;
+	struct pci_dev *misc_f3_ctl;
+	int err = 0;
+
+	pvt = mci->pvt_info;
+	misc_f3_ctl = pvt->misc_f3_ctl;
+
+	err = pci_read_config_dword(misc_f3_ctl, K8_NBSH, &regs->nbsh);
+	if (err)
+		goto err_reg;
+
+	if (!(regs->nbsh & K8_NBSH_VALID_BIT))
+		return 0;
+
+	/* valid error, read remaining error information registers */
+	err = pci_read_config_dword(misc_f3_ctl, K8_NBSL, &regs->nbsl);
+	if (err)
+		goto err_reg;
+
+	err = pci_read_config_dword(misc_f3_ctl, K8_NBEAL, &regs->nbeal);
+	if (err)
+		goto err_reg;
+
+	err = pci_read_config_dword(misc_f3_ctl, K8_NBEAH, &regs->nbeah);
+	if (err)
+		goto err_reg;
+
+	err = pci_read_config_dword(misc_f3_ctl, K8_NBCFG, &regs->nbcfg);
+	if (err)
+		goto err_reg;
+
+	return 1;
+
+err_reg:
+	debugf0("Reading error info register failed\n");
+	return 0;
+}
+
+/*
+ * This function is called to retrieve the error data from hardware and store it
+ * in the info structure.
+ *
+ * Returns:
+ *	- 1: if a valid error is found
+ *	- 0: if no error is found
+ */
+static int amd64_get_error_info(struct mem_ctl_info *mci,
+				struct amd64_error_info_regs *info)
+{
+	struct amd64_pvt *pvt;
+	struct amd64_error_info_regs regs;
+
+	pvt = mci->pvt_info;
+
+	if (!amd64_get_error_info_regs(mci, info))
+		return 0;
+
+	/*
+	 * Here's the problem with the K8's EDAC reporting: There are four
+	 * registers which report pieces of error information. They are shared
+	 * between CEs and UEs. Furthermore, contrary to what is stated in the
+	 * BKDG, the overflow bit is never used! Every error always updates the
+	 * reporting registers.
+	 *
+	 * Can you see the race condition? All four error reporting registers
+	 * must be read before a new error updates them! There is no way to read
+	 * all four registers atomically. The best than can be done is to detect
+	 * that a race has occured and then report the error without any kind of
+	 * precision.
+	 *
+	 * What is still positive is that errors are still reported and thus
+	 * problems can still be detected - just not localized because the
+	 * syndrome and address are spread out across registers.
+	 *
+	 * Grrrrr!!!!!  Here's hoping that AMD fixes this in some future K8 rev.
+	 * UEs and CEs should have separate register sets with proper overflow
+	 * bits that are used! At very least the problem can be fixed by
+	 * honoring the ErrValid bit in 'nbsh' and not updating registers - just
+	 * set the overflow bit - unless the current error is CE and the new
+	 * error is UE which would be the only situation for overwriting the
+	 * current values.
+	 */
+
+	regs = *info;
+
+	/* Use info from the second read - most current */
+	if (unlikely(!amd64_get_error_info_regs(mci, info)))
+		return 0;
+
+	/* clear the error bits in hardware */
+	pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT);
+
+	/* Check for the possible race condition */
+	if ((regs.nbsh != info->nbsh) ||
+	     (regs.nbsl != info->nbsl) ||
+	     (regs.nbeah != info->nbeah) ||
+	     (regs.nbeal != info->nbeal)) {
+		amd64_mc_printk(mci, KERN_WARNING,
+				"hardware STATUS read access race condition "
+				"detected!\n");
+		return 0;
+	}
+	return 1;
+}
+
+static inline void amd64_decode_gart_tlb_error(struct mem_ctl_info *mci,
+					 struct amd64_error_info_regs *info)
+{
+	u32 err_code;
+	u32 ec_tt;		/* error code transaction type (2b) */
+	u32 ec_ll;		/* error code cache level (2b) */
+
+	err_code = EXTRACT_ERROR_CODE(info->nbsl);
+	ec_ll = EXTRACT_LL_CODE(err_code);
+	ec_tt = EXTRACT_TT_CODE(err_code);
+
+	amd64_mc_printk(mci, KERN_ERR,
+		     "GART TLB event: transaction type(%s), "
+		     "cache level(%s)\n", tt_msgs[ec_tt], ll_msgs[ec_ll]);
+}
+
+static inline void amd64_decode_mem_cache_error(struct mem_ctl_info *mci,
+				      struct amd64_error_info_regs *info)
+{
+	u32 err_code;
+	u32 ec_rrrr;		/* error code memory transaction (4b) */
+	u32 ec_tt;		/* error code transaction type (2b) */
+	u32 ec_ll;		/* error code cache level (2b) */
+
+	err_code = EXTRACT_ERROR_CODE(info->nbsl);
+	ec_ll = EXTRACT_LL_CODE(err_code);
+	ec_tt = EXTRACT_TT_CODE(err_code);
+	ec_rrrr = EXTRACT_RRRR_CODE(err_code);
+
+	amd64_mc_printk(mci, KERN_ERR,
+		     "cache hierarchy error: memory transaction type(%s), "
+		     "transaction type(%s), cache level(%s)\n",
+		     rrrr_msgs[ec_rrrr], tt_msgs[ec_tt], ll_msgs[ec_ll]);
+}
+
+
+/*
+ * Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR
+ * ADDRESS and process.
+ */
+static void amd64_handle_ce(struct mem_ctl_info *mci,
+			    struct amd64_error_info_regs *info)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u64 SystemAddress;
+
+	/* Ensure that the Error Address is VALID */
+	if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) {
+		amd64_mc_printk(mci, KERN_ERR,
+			"HW has no ERROR_ADDRESS available\n");
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
+		return;
+	}
+
+	SystemAddress = extract_error_address(mci, info);
+
+	amd64_mc_printk(mci, KERN_ERR,
+		"CE ERROR_ADDRESS= 0x%llx\n", SystemAddress);
+
+	pvt->ops->map_sysaddr_to_csrow(mci, info, SystemAddress);
+}
+
+/* Handle any Un-correctable Errors (UEs) */
+static void amd64_handle_ue(struct mem_ctl_info *mci,
+			    struct amd64_error_info_regs *info)
+{
+	int csrow;
+	u64 SystemAddress;
+	u32 page, offset;
+	struct mem_ctl_info *log_mci, *src_mci = NULL;
+
+	log_mci = mci;
+
+	if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) {
+		amd64_mc_printk(mci, KERN_CRIT,
+			"HW has no ERROR_ADDRESS available\n");
+		edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
+		return;
+	}
+
+	SystemAddress = extract_error_address(mci, info);
+
+	/*
+	 * Find out which node the error address belongs to. This may be
+	 * different from the node that detected the error.
+	 */
+	src_mci = find_mc_by_sys_addr(mci, SystemAddress);
+	if (!src_mci) {
+		amd64_mc_printk(mci, KERN_CRIT,
+			"ERROR ADDRESS (0x%lx) value NOT mapped to a MC\n",
+			(unsigned long)SystemAddress);
+		edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
+		return;
+	}
+
+	log_mci = src_mci;
+
+	csrow = sys_addr_to_csrow(log_mci, SystemAddress);
+	if (csrow < 0) {
+		amd64_mc_printk(mci, KERN_CRIT,
+			"ERROR_ADDRESS (0x%lx) value NOT mapped to 'csrow'\n",
+			(unsigned long)SystemAddress);
+		edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
+	} else {
+		error_address_to_page_and_offset(SystemAddress, &page, &offset);
+		edac_mc_handle_ue(log_mci, page, offset, csrow, EDAC_MOD_STR);
+	}
+}
+
+static void amd64_decode_bus_error(struct mem_ctl_info *mci,
+				   struct amd64_error_info_regs *info)
+{
+	u32 err_code, ext_ec;
+	u32 ec_pp;		/* error code participating processor (2p) */
+	u32 ec_to;		/* error code timed out (1b) */
+	u32 ec_rrrr;		/* error code memory transaction (4b) */
+	u32 ec_ii;		/* error code memory or I/O (2b) */
+	u32 ec_ll;		/* error code cache level (2b) */
+
+	ext_ec = EXTRACT_EXT_ERROR_CODE(info->nbsl);
+	err_code = EXTRACT_ERROR_CODE(info->nbsl);
+
+	ec_ll = EXTRACT_LL_CODE(err_code);
+	ec_ii = EXTRACT_II_CODE(err_code);
+	ec_rrrr = EXTRACT_RRRR_CODE(err_code);
+	ec_to = EXTRACT_TO_CODE(err_code);
+	ec_pp = EXTRACT_PP_CODE(err_code);
+
+	amd64_mc_printk(mci, KERN_ERR,
+		"BUS ERROR:\n"
+		"  time-out(%s) mem or i/o(%s)\n"
+		"  participating processor(%s)\n"
+		"  memory transaction type(%s)\n"
+		"  cache level(%s) Error Found by: %s\n",
+		to_msgs[ec_to],
+		ii_msgs[ec_ii],
+		pp_msgs[ec_pp],
+		rrrr_msgs[ec_rrrr],
+		ll_msgs[ec_ll],
+		(info->nbsh & K8_NBSH_ERR_SCRUBER) ?
+			"Scrubber" : "Normal Operation");
+
+	/* If this was an 'observed' error, early out */
+	if (ec_pp == K8_NBSL_PP_OBS)
+		return;		/* We aren't the node involved */
+
+	/* Parse out the extended error code for ECC events */
+	switch (ext_ec) {
+	/* F10 changed to one Extended ECC error code */
+	case F10_NBSL_EXT_ERR_RES:		/* Reserved field */
+	case F10_NBSL_EXT_ERR_ECC:		/* F10 ECC ext err code */
+		break;
+
+	default:
+		amd64_mc_printk(mci, KERN_ERR, "NOT ECC: no special error "
+					       "handling for this error\n");
+		return;
+	}
+
+	if (info->nbsh & K8_NBSH_CECC)
+		amd64_handle_ce(mci, info);
+	else if (info->nbsh & K8_NBSH_UECC)
+		amd64_handle_ue(mci, info);
+
+	/*
+	 * If main error is CE then overflow must be CE.  If main error is UE
+	 * then overflow is unknown.  We'll call the overflow a CE - if
+	 * panic_on_ue is set then we're already panic'ed and won't arrive
+	 * here. Else, then apparently someone doesn't think that UE's are
+	 * catastrophic.
+	 */
+	if (info->nbsh & K8_NBSH_OVERFLOW)
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR
+					  "Error Overflow set");
+}
+
+int amd64_process_error_info(struct mem_ctl_info *mci,
+			     struct amd64_error_info_regs *info,
+			     int handle_errors)
+{
+	struct amd64_pvt *pvt;
+	struct amd64_error_info_regs *regs;
+	u32 err_code, ext_ec;
+	int gart_tlb_error = 0;
+
+	pvt = mci->pvt_info;
+
+	/* If caller doesn't want us to process the error, return */
+	if (!handle_errors)
+		return 1;
+
+	regs = info;
+
+	debugf1("NorthBridge ERROR: mci(0x%p)\n", mci);
+	debugf1("  MC node(%d) Error-Address(0x%.8x-%.8x)\n",
+		pvt->mc_node_id, regs->nbeah, regs->nbeal);
+	debugf1("  nbsh(0x%.8x) nbsl(0x%.8x)\n",
+		regs->nbsh, regs->nbsl);
+	debugf1("  Valid Error=%s Overflow=%s\n",
+		(regs->nbsh & K8_NBSH_VALID_BIT) ? "True" : "False",
+		(regs->nbsh & K8_NBSH_OVERFLOW) ? "True" : "False");
+	debugf1("  Err Uncorrected=%s MCA Error Reporting=%s\n",
+		(regs->nbsh & K8_NBSH_UNCORRECTED_ERR) ?
+			"True" : "False",
+		(regs->nbsh & K8_NBSH_ERR_ENABLE) ?
+			"True" : "False");
+	debugf1("  MiscErr Valid=%s ErrAddr Valid=%s PCC=%s\n",
+		(regs->nbsh & K8_NBSH_MISC_ERR_VALID) ?
+			"True" : "False",
+		(regs->nbsh & K8_NBSH_VALID_ERROR_ADDR) ?
+			"True" : "False",
+		(regs->nbsh & K8_NBSH_PCC) ?
+			"True" : "False");
+	debugf1("  CECC=%s UECC=%s Found by Scruber=%s\n",
+		(regs->nbsh & K8_NBSH_CECC) ?
+			"True" : "False",
+		(regs->nbsh & K8_NBSH_UECC) ?
+			"True" : "False",
+		(regs->nbsh & K8_NBSH_ERR_SCRUBER) ?
+			"True" : "False");
+	debugf1("  CORE0=%s CORE1=%s CORE2=%s CORE3=%s\n",
+		(regs->nbsh & K8_NBSH_CORE0) ? "True" : "False",
+		(regs->nbsh & K8_NBSH_CORE1) ? "True" : "False",
+		(regs->nbsh & K8_NBSH_CORE2) ? "True" : "False",
+		(regs->nbsh & K8_NBSH_CORE3) ? "True" : "False");
+
+
+	err_code = EXTRACT_ERROR_CODE(regs->nbsl);
+
+	/* Determine which error type:
+	 *	1) GART errors - non-fatal, developmental events
+	 *	2) MEMORY errors
+	 *	3) BUS errors
+	 *	4) Unknown error
+	 */
+	if (TEST_TLB_ERROR(err_code)) {
+		/*
+		 * GART errors are intended to help graphics driver developers
+		 * to detect bad GART PTEs. It is recommended by AMD to disable
+		 * GART table walk error reporting by default[1] (currently
+		 * being disabled in mce_cpu_quirks()) and according to the
+		 * comment in mce_cpu_quirks(), such GART errors can be
+		 * incorrectly triggered. We may see these errors anyway and
+		 * unless requested by the user, they won't be reported.
+		 *
+		 * [1] section 13.10.1 on BIOS and Kernel Developers Guide for
+		 *     AMD NPT family 0Fh processors
+		 */
+		if (report_gart_errors == 0)
+			return 1;
+
+		/*
+		 * Only if GART error reporting is requested should we generate
+		 * any logs.
+		 */
+		gart_tlb_error = 1;
+
+		debugf1("GART TLB error\n");
+		amd64_decode_gart_tlb_error(mci, info);
+	} else if (TEST_MEM_ERROR(err_code)) {
+		debugf1("Memory/Cache error\n");
+		amd64_decode_mem_cache_error(mci, info);
+	} else if (TEST_BUS_ERROR(err_code)) {
+		debugf1("Bus (Link/DRAM) error\n");
+		amd64_decode_bus_error(mci, info);
+	} else {
+		/* shouldn't reach here! */
+		amd64_mc_printk(mci, KERN_WARNING,
+			     "%s(): unknown MCE error 0x%x\n", __func__,
+			     err_code);
+	}
+
+	ext_ec = EXTRACT_EXT_ERROR_CODE(regs->nbsl);
+	amd64_mc_printk(mci, KERN_ERR,
+		"ExtErr=(0x%x) %s\n", ext_ec, ext_msgs[ext_ec]);
+
+	if (((ext_ec >= F10_NBSL_EXT_ERR_CRC &&
+			ext_ec <= F10_NBSL_EXT_ERR_TGT) ||
+			(ext_ec == F10_NBSL_EXT_ERR_RMW)) &&
+			EXTRACT_LDT_LINK(info->nbsh)) {
+
+		amd64_mc_printk(mci, KERN_ERR,
+			"Error on hypertransport link: %s\n",
+			htlink_msgs[
+			EXTRACT_LDT_LINK(info->nbsh)]);
+	}
+
+	/*
+	 * Check the UE bit of the NB status high register, if set generate some
+	 * logs. If NOT a GART error, then process the event as a NO-INFO event.
+	 * If it was a GART error, skip that process.
+	 */
+	if (regs->nbsh & K8_NBSH_UNCORRECTED_ERR) {
+		amd64_mc_printk(mci, KERN_CRIT, "uncorrected error\n");
+		if (!gart_tlb_error)
+			edac_mc_handle_ue_no_info(mci, "UE bit is set\n");
+	}
+
+	if (regs->nbsh & K8_NBSH_PCC)
+		amd64_mc_printk(mci, KERN_CRIT,
+			"PCC (processor context corrupt) set\n");
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(amd64_process_error_info);
+
+/*
+ * The main polling 'check' function, called FROM the edac core to perform the
+ * error checking and if an error is encountered, error processing.
+ */
+static void amd64_check(struct mem_ctl_info *mci)
+{
+	struct amd64_error_info_regs info;
+
+	if (amd64_get_error_info(mci, &info))
+		amd64_process_error_info(mci, &info, 1);
+}
+
+/*
+ * Input:
+ *	1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer
+ *	2) AMD Family index value
+ *
+ * Ouput:
+ *	Upon return of 0, the following filled in:
+ *
+ *		struct pvt->addr_f1_ctl
+ *		struct pvt->misc_f3_ctl
+ *
+ *	Filled in with related device funcitions of 'dram_f2_ctl'
+ *	These devices are "reserved" via the pci_get_device()
+ *
+ *	Upon return of 1 (error status):
+ *
+ *		Nothing reserved
+ */
+static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx)
+{
+	const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx];
+
+	/* Reserve the ADDRESS MAP Device */
+	pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
+						    amd64_dev->addr_f1_ctl,
+						    pvt->dram_f2_ctl);
+
+	if (!pvt->addr_f1_ctl) {
+		amd64_printk(KERN_ERR, "error address map device not found: "
+			     "vendor %x device 0x%x (broken BIOS?)\n",
+			     PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl);
+		return 1;
+	}
+
+	/* Reserve the MISC Device */
+	pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
+						    amd64_dev->misc_f3_ctl,
+						    pvt->dram_f2_ctl);
+
+	if (!pvt->misc_f3_ctl) {
+		pci_dev_put(pvt->addr_f1_ctl);
+		pvt->addr_f1_ctl = NULL;
+
+		amd64_printk(KERN_ERR, "error miscellaneous device not found: "
+			     "vendor %x device 0x%x (broken BIOS?)\n",
+			     PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl);
+		return 1;
+	}
+
+	debugf1("    Addr Map device PCI Bus ID:\t%s\n",
+		pci_name(pvt->addr_f1_ctl));
+	debugf1("    DRAM MEM-CTL PCI Bus ID:\t%s\n",
+		pci_name(pvt->dram_f2_ctl));
+	debugf1("    Misc device PCI Bus ID:\t%s\n",
+		pci_name(pvt->misc_f3_ctl));
+
+	return 0;
+}
+
+static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt)
+{
+	pci_dev_put(pvt->addr_f1_ctl);
+	pci_dev_put(pvt->misc_f3_ctl);
+}
+
+/*
+ * Retrieve the hardware registers of the memory controller (this includes the
+ * 'Address Map' and 'Misc' device regs)
+ */
+static void amd64_read_mc_registers(struct amd64_pvt *pvt)
+{
+	u64 msr_val;
+	int dram, err = 0;
+
+	/*
+	 * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since
+	 * those are Read-As-Zero
+	 */
+	rdmsrl(MSR_K8_TOP_MEM1, msr_val);
+	pvt->top_mem = msr_val >> 23;
+	debugf0("  TOP_MEM=0x%08llx\n", pvt->top_mem);
+
+	/* check first whether TOP_MEM2 is enabled */
+	rdmsrl(MSR_K8_SYSCFG, msr_val);
+	if (msr_val & (1U << 21)) {
+		rdmsrl(MSR_K8_TOP_MEM2, msr_val);
+		pvt->top_mem2 = msr_val >> 23;
+		debugf0("  TOP_MEM2=0x%08llx\n", pvt->top_mem2);
+	} else
+		debugf0("  TOP_MEM2 disabled.\n");
+
+	amd64_cpu_display_info(pvt);
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap);
+	if (err)
+		goto err_reg;
+
+	if (pvt->ops->read_dram_ctl_register)
+		pvt->ops->read_dram_ctl_register(pvt);
+
+	for (dram = 0; dram < DRAM_REG_COUNT; dram++) {
+		/*
+		 * Call CPU specific READ function to get the DRAM Base and
+		 * Limit values from the DCT.
+		 */
+		pvt->ops->read_dram_base_limit(pvt, dram);
+
+		/*
+		 * Only print out debug info on rows with both R and W Enabled.
+		 * Normal processing, compiler should optimize this whole 'if'
+		 * debug output block away.
+		 */
+		if (pvt->dram_rw_en[dram] != 0) {
+			debugf1("  DRAM_BASE[%d]: 0x%8.08x-%8.08x "
+				"DRAM_LIMIT:  0x%8.08x-%8.08x\n",
+				dram,
+				(u32)(pvt->dram_base[dram] >> 32),
+				(u32)(pvt->dram_base[dram] & 0xFFFFFFFF),
+				(u32)(pvt->dram_limit[dram] >> 32),
+				(u32)(pvt->dram_limit[dram] & 0xFFFFFFFF));
+			debugf1("        IntlvEn=%s %s %s "
+				"IntlvSel=%d DstNode=%d\n",
+				pvt->dram_IntlvEn[dram] ?
+					"Enabled" : "Disabled",
+				(pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W",
+				(pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R",
+				pvt->dram_IntlvSel[dram],
+				pvt->dram_DstNode[dram]);
+		}
+	}
+
+	amd64_read_dct_base_mask(pvt);
+
+	err = pci_read_config_dword(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar);
+	if (err)
+		goto err_reg;
+
+	amd64_read_dbam_reg(pvt);
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl,
+				F10_ONLINE_SPARE, &pvt->online_spare);
+	if (err)
+		goto err_reg;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+	if (err)
+		goto err_reg;
+
+	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0);
+	if (err)
+		goto err_reg;
+
+	if (!dct_ganging_enabled(pvt)) {
+		err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1,
+						&pvt->dclr1);
+		if (err)
+			goto err_reg;
+
+		err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_1,
+						&pvt->dchr1);
+		if (err)
+			goto err_reg;
+	}
+
+	amd64_dump_misc_regs(pvt);
+
+err_reg:
+	debugf0("Reading an MC register failed\n");
+
+}
+
+/*
+ * NOTE: CPU Revision Dependent code
+ *
+ * Input:
+ *	@csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ *	k8 private pointer to -->
+ *			DRAM Bank Address mapping register
+ *			node_id
+ *			DCL register where dual_channel_active is
+ *
+ * The DBAM register consists of 4 sets of 4 bits each definitions:
+ *
+ * Bits:	CSROWs
+ * 0-3		CSROWs 0 and 1
+ * 4-7		CSROWs 2 and 3
+ * 8-11		CSROWs 4 and 5
+ * 12-15	CSROWs 6 and 7
+ *
+ * Values range from: 0 to 15
+ * The meaning of the values depends on CPU revision and dual-channel state,
+ * see relevant BKDG more info.
+ *
+ * The memory controller provides for total of only 8 CSROWs in its current
+ * architecture. Each "pair" of CSROWs normally represents just one DIMM in
+ * single channel or two (2) DIMMs in dual channel mode.
+ *
+ * The following code logic collapses the various tables for CSROW based on CPU
+ * revision.
+ *
+ * Returns:
+ *	The number of PAGE_SIZE pages on the specified CSROW number it
+ *	encompasses
+ *
+ */
+static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
+{
+	u32 dram_map, nr_pages;
+
+	/*
+	 * The math on this doesn't look right on the surface because x/2*4 can
+	 * be simplified to x*2 but this expression makes use of the fact that
+	 * it is integral math where 1/2=0. This intermediate value becomes the
+	 * number of bits to shift the DBAM register to extract the proper CSROW
+	 * field.
+	 */
+	dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
+
+	nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map);
+
+	/*
+	 * If dual channel then double the memory size of single channel.
+	 * Channel count is 1 or 2
+	 */
+	nr_pages <<= (pvt->channel_count - 1);
+
+	debugf0("  (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map);
+	debugf0("    nr_pages= %u  channel-count = %d\n",
+		nr_pages, pvt->channel_count);
+
+	return nr_pages;
+}
+
+/*
+ * Initialize the array of csrow attribute instances, based on the values
+ * from pci config hardware registers.
+ */
+static int amd64_init_csrows(struct mem_ctl_info *mci)
+{
+	struct csrow_info *csrow;
+	struct amd64_pvt *pvt;
+	u64 input_addr_min, input_addr_max, sys_addr;
+	int i, err = 0, empty = 1;
+
+	pvt = mci->pvt_info;
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg);
+	if (err)
+		debugf0("Reading K8_NBCFG failed\n");
+
+	debugf0("NBCFG= 0x%x  CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg,
+		(pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
+		(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
+		);
+
+	for (i = 0; i < CHIPSELECT_COUNT; i++) {
+		csrow = &mci->csrows[i];
+
+		if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
+			debugf1("----CSROW %d EMPTY for node %d\n", i,
+				pvt->mc_node_id);
+			continue;
+		}
+
+		debugf1("----CSROW %d VALID for MC node %d\n",
+			i, pvt->mc_node_id);
+
+		empty = 0;
+		csrow->nr_pages = amd64_csrow_nr_pages(i, pvt);
+		find_csrow_limits(mci, i, &input_addr_min, &input_addr_max);
+		sys_addr = input_addr_to_sys_addr(mci, input_addr_min);
+		csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT);
+		sys_addr = input_addr_to_sys_addr(mci, input_addr_max);
+		csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT);
+		csrow->page_mask = ~mask_from_dct_mask(pvt, i);
+		/* 8 bytes of resolution */
+
+		csrow->mtype = amd64_determine_memory_type(pvt);
+
+		debugf1("  for MC node %d csrow %d:\n", pvt->mc_node_id, i);
+		debugf1("    input_addr_min: 0x%lx input_addr_max: 0x%lx\n",
+			(unsigned long)input_addr_min,
+			(unsigned long)input_addr_max);
+		debugf1("    sys_addr: 0x%lx  page_mask: 0x%lx\n",
+			(unsigned long)sys_addr, csrow->page_mask);
+		debugf1("    nr_pages: %u  first_page: 0x%lx "
+			"last_page: 0x%lx\n",
+			(unsigned)csrow->nr_pages,
+			csrow->first_page, csrow->last_page);
+
+		/*
+		 * determine whether CHIPKILL or JUST ECC or NO ECC is operating
+		 */
+		if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE)
+			csrow->edac_mode =
+			    (pvt->nbcfg & K8_NBCFG_CHIPKILL) ?
+			    EDAC_S4ECD4ED : EDAC_SECDED;
+		else
+			csrow->edac_mode = EDAC_NONE;
+	}
+
+	return empty;
+}
+
+/*
+ * Only if 'ecc_enable_override' is set AND BIOS had ECC disabled, do "we"
+ * enable it.
+ */
+static void amd64_enable_ecc_error_reporting(struct mem_ctl_info *mci)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	const cpumask_t *cpumask = cpumask_of_node(pvt->mc_node_id);
+	int cpu, idx = 0, err = 0;
+	struct msr msrs[cpumask_weight(cpumask)];
+	u32 value;
+	u32 mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn;
+
+	if (!ecc_enable_override)
+		return;
+
+	memset(msrs, 0, sizeof(msrs));
+
+	amd64_printk(KERN_WARNING,
+		"'ecc_enable_override' parameter is active, "
+		"Enabling AMD ECC hardware now: CAUTION\n");
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCTL, &value);
+	if (err)
+		debugf0("Reading K8_NBCTL failed\n");
+
+	/* turn on UECCn and CECCEn bits */
+	pvt->old_nbctl = value & mask;
+	pvt->nbctl_mcgctl_saved = 1;
+
+	value |= mask;
+	pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value);
+
+	rdmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs);
+
+	for_each_cpu(cpu, cpumask) {
+		if (msrs[idx].l & K8_MSR_MCGCTL_NBE)
+			set_bit(idx, &pvt->old_mcgctl);
+
+		msrs[idx].l |= K8_MSR_MCGCTL_NBE;
+		idx++;
+	}
+	wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs);
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value);
+	if (err)
+		debugf0("Reading K8_NBCFG failed\n");
+
+	debugf0("NBCFG(1)= 0x%x  CHIPKILL= %s ECC_ENABLE= %s\n", value,
+		(value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
+		(value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled");
+
+	if (!(value & K8_NBCFG_ECC_ENABLE)) {
+		amd64_printk(KERN_WARNING,
+			"This node reports that DRAM ECC is "
+			"currently Disabled; ENABLING now\n");
+
+		/* Attempt to turn on DRAM ECC Enable */
+		value |= K8_NBCFG_ECC_ENABLE;
+		pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value);
+
+		err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value);
+		if (err)
+			debugf0("Reading K8_NBCFG failed\n");
+
+		if (!(value & K8_NBCFG_ECC_ENABLE)) {
+			amd64_printk(KERN_WARNING,
+				"Hardware rejects Enabling DRAM ECC checking\n"
+				"Check memory DIMM configuration\n");
+		} else {
+			amd64_printk(KERN_DEBUG,
+				"Hardware accepted DRAM ECC Enable\n");
+		}
+	}
+	debugf0("NBCFG(2)= 0x%x  CHIPKILL= %s ECC_ENABLE= %s\n", value,
+		(value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
+		(value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled");
+
+	pvt->ctl_error_info.nbcfg = value;
+}
+
+static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt)
+{
+	const cpumask_t *cpumask = cpumask_of_node(pvt->mc_node_id);
+	int cpu, idx = 0, err = 0;
+	struct msr msrs[cpumask_weight(cpumask)];
+	u32 value;
+	u32 mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn;
+
+	if (!pvt->nbctl_mcgctl_saved)
+		return;
+
+	memset(msrs, 0, sizeof(msrs));
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCTL, &value);
+	if (err)
+		debugf0("Reading K8_NBCTL failed\n");
+	value &= ~mask;
+	value |= pvt->old_nbctl;
+
+	/* restore the NB Enable MCGCTL bit */
+	pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value);
+
+	rdmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs);
+
+	for_each_cpu(cpu, cpumask) {
+		msrs[idx].l &= ~K8_MSR_MCGCTL_NBE;
+		msrs[idx].l |=
+			test_bit(idx, &pvt->old_mcgctl) << K8_MSR_MCGCTL_NBE;
+		idx++;
+	}
+
+	wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs);
+}
+
+static void check_mcg_ctl(void *ret)
+{
+	u64 msr_val = 0;
+	u8 nbe;
+
+	rdmsrl(MSR_IA32_MCG_CTL, msr_val);
+	nbe = msr_val & K8_MSR_MCGCTL_NBE;
+
+	debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
+		raw_smp_processor_id(), msr_val,
+		(nbe ? "enabled" : "disabled"));
+
+	if (!nbe)
+		*(int *)ret = 0;
+}
+
+/* check MCG_CTL on all the cpus on this node */
+static int amd64_mcg_ctl_enabled_on_cpus(const cpumask_t *mask)
+{
+	int ret = 1;
+	preempt_disable();
+	smp_call_function_many(mask, check_mcg_ctl, &ret, 1);
+	preempt_enable();
+
+	return ret;
+}
+
+/*
+ * EDAC requires that the BIOS have ECC enabled before taking over the
+ * processing of ECC errors. This is because the BIOS can properly initialize
+ * the memory system completely. A command line option allows to force-enable
+ * hardware ECC later in amd64_enable_ecc_error_reporting().
+ */
+static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
+{
+	u32 value;
+	int err = 0, ret = 0;
+	u8 ecc_enabled = 0;
+
+	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value);
+	if (err)
+		debugf0("Reading K8_NBCTL failed\n");
+
+	ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE);
+
+	ret = amd64_mcg_ctl_enabled_on_cpus(cpumask_of_node(pvt->mc_node_id));
+
+	debugf0("K8_NBCFG=0x%x,  DRAM ECC is %s\n", value,
+			(value & K8_NBCFG_ECC_ENABLE ? "enabled" : "disabled"));
+
+	if (!ecc_enabled || !ret) {
+		if (!ecc_enabled) {
+			amd64_printk(KERN_WARNING, "This node reports that "
+						   "Memory ECC is currently "
+						   "disabled.\n");
+
+			amd64_printk(KERN_WARNING, "bit 0x%lx in register "
+				"F3x%x of the MISC_CONTROL device (%s) "
+				"should be enabled\n", K8_NBCFG_ECC_ENABLE,
+				K8_NBCFG, pci_name(pvt->misc_f3_ctl));
+		}
+		if (!ret) {
+			amd64_printk(KERN_WARNING, "bit 0x%016lx in MSR 0x%08x "
+					"of node %d should be enabled\n",
+					K8_MSR_MCGCTL_NBE, MSR_IA32_MCG_CTL,
+					pvt->mc_node_id);
+		}
+		if (!ecc_enable_override) {
+			amd64_printk(KERN_WARNING, "WARNING: ECC is NOT "
+				"currently enabled by the BIOS. Module "
+				"will NOT be loaded.\n"
+				"    Either Enable ECC in the BIOS, "
+				"or use the 'ecc_enable_override' "
+				"parameter.\n"
+				"    Might be a BIOS bug, if BIOS says "
+				"ECC is enabled\n"
+				"    Use of the override can cause "
+				"unknown side effects.\n");
+			ret = -ENODEV;
+		}
+	} else {
+		amd64_printk(KERN_INFO,
+			"ECC is enabled by BIOS, Proceeding "
+			"with EDAC module initialization\n");
+
+		/* CLEAR the override, since BIOS controlled it */
+		ecc_enable_override = 0;
+	}
+
+	return ret;
+}
+
+struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
+					  ARRAY_SIZE(amd64_inj_attrs) +
+					  1];
+
+struct mcidev_sysfs_attribute terminator = { .attr = { .name = NULL } };
+
+static void amd64_set_mc_sysfs_attributes(struct mem_ctl_info *mci)
+{
+	unsigned int i = 0, j = 0;
+
+	for (; i < ARRAY_SIZE(amd64_dbg_attrs); i++)
+		sysfs_attrs[i] = amd64_dbg_attrs[i];
+
+	for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++)
+		sysfs_attrs[i] = amd64_inj_attrs[j];
+
+	sysfs_attrs[i] = terminator;
+
+	mci->mc_driver_sysfs_attributes = sysfs_attrs;
+}
+
+static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	mci->mtype_cap		= MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
+	mci->edac_ctl_cap	= EDAC_FLAG_NONE;
+	mci->edac_cap		= EDAC_FLAG_NONE;
+
+	if (pvt->nbcap & K8_NBCAP_SECDED)
+		mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
+
+	if (pvt->nbcap & K8_NBCAP_CHIPKILL)
+		mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
+
+	mci->edac_cap		= amd64_determine_edac_cap(pvt);
+	mci->mod_name		= EDAC_MOD_STR;
+	mci->mod_ver		= EDAC_AMD64_VERSION;
+	mci->ctl_name		= get_amd_family_name(pvt->mc_type_index);
+	mci->dev_name		= pci_name(pvt->dram_f2_ctl);
+	mci->ctl_page_to_phys	= NULL;
+
+	/* IMPORTANT: Set the polling 'check' function in this module */
+	mci->edac_check		= amd64_check;
+
+	/* memory scrubber interface */
+	mci->set_sdram_scrub_rate = amd64_set_scrub_rate;
+	mci->get_sdram_scrub_rate = amd64_get_scrub_rate;
+}
+
+/*
+ * Init stuff for this DRAM Controller device.
+ *
+ * Due to a hardware feature on Fam10h CPUs, the Enable Extended Configuration
+ * Space feature MUST be enabled on ALL Processors prior to actually reading
+ * from the ECS registers. Since the loading of the module can occur on any
+ * 'core', and cores don't 'see' all the other processors ECS data when the
+ * others are NOT enabled. Our solution is to first enable ECS access in this
+ * routine on all processors, gather some data in a amd64_pvt structure and
+ * later come back in a finish-setup function to perform that final
+ * initialization. See also amd64_init_2nd_stage() for that.
+ */
+static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl,
+				    int mc_type_index)
+{
+	struct amd64_pvt *pvt = NULL;
+	int err = 0, ret;
+
+	ret = -ENOMEM;
+	pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL);
+	if (!pvt)
+		goto err_exit;
+
+	pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+
+	pvt->dram_f2_ctl	= dram_f2_ctl;
+	pvt->ext_model		= boot_cpu_data.x86_model >> 4;
+	pvt->mc_type_index	= mc_type_index;
+	pvt->ops		= family_ops(mc_type_index);
+	pvt->old_mcgctl		= 0;
+
+	/*
+	 * We have the dram_f2_ctl device as an argument, now go reserve its
+	 * sibling devices from the PCI system.
+	 */
+	ret = -ENODEV;
+	err = amd64_reserve_mc_sibling_devices(pvt, mc_type_index);
+	if (err)
+		goto err_free;
+
+	ret = -EINVAL;
+	err = amd64_check_ecc_enabled(pvt);
+	if (err)
+		goto err_put;
+
+	/*
+	 * Key operation here: setup of HW prior to performing ops on it. Some
+	 * setup is required to access ECS data. After this is performed, the
+	 * 'teardown' function must be called upon error and normal exit paths.
+	 */
+	if (boot_cpu_data.x86 >= 0x10)
+		amd64_setup(pvt);
+
+	/*
+	 * Save the pointer to the private data for use in 2nd initialization
+	 * stage
+	 */
+	pvt_lookup[pvt->mc_node_id] = pvt;
+
+	return 0;
+
+err_put:
+	amd64_free_mc_sibling_devices(pvt);
+
+err_free:
+	kfree(pvt);
+
+err_exit:
+	return ret;
+}
+
+/*
+ * This is the finishing stage of the init code. Needs to be performed after all
+ * MCs' hardware have been prepped for accessing extended config space.
+ */
+static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
+{
+	int node_id = pvt->mc_node_id;
+	struct mem_ctl_info *mci;
+	int ret, err = 0;
+
+	amd64_read_mc_registers(pvt);
+
+	ret = -ENODEV;
+	if (pvt->ops->probe_valid_hardware) {
+		err = pvt->ops->probe_valid_hardware(pvt);
+		if (err)
+			goto err_exit;
+	}
+
+	/*
+	 * We need to determine how many memory channels there are. Then use
+	 * that information for calculating the size of the dynamic instance
+	 * tables in the 'mci' structure
+	 */
+	pvt->channel_count = pvt->ops->early_channel_count(pvt);
+	if (pvt->channel_count < 0)
+		goto err_exit;
+
+	ret = -ENOMEM;
+	mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+	if (!mci)
+		goto err_exit;
+
+	mci->pvt_info = pvt;
+
+	mci->dev = &pvt->dram_f2_ctl->dev;
+	amd64_setup_mci_misc_attributes(mci);
+
+	if (amd64_init_csrows(mci))
+		mci->edac_cap = EDAC_FLAG_NONE;
+
+	amd64_enable_ecc_error_reporting(mci);
+	amd64_set_mc_sysfs_attributes(mci);
+
+	ret = -ENODEV;
+	if (edac_mc_add_mc(mci)) {
+		debugf1("failed edac_mc_add_mc()\n");
+		goto err_add_mc;
+	}
+
+	mci_lookup[node_id] = mci;
+	pvt_lookup[node_id] = NULL;
+	return 0;
+
+err_add_mc:
+	edac_mc_free(mci);
+
+err_exit:
+	debugf0("failure to init 2nd stage: ret=%d\n", ret);
+
+	amd64_restore_ecc_error_reporting(pvt);
+
+	if (boot_cpu_data.x86 > 0xf)
+		amd64_teardown(pvt);
+
+	amd64_free_mc_sibling_devices(pvt);
+
+	kfree(pvt_lookup[pvt->mc_node_id]);
+	pvt_lookup[node_id] = NULL;
+
+	return ret;
+}
+
+
+static int __devinit amd64_init_one_instance(struct pci_dev *pdev,
+				 const struct pci_device_id *mc_type)
+{
+	int ret = 0;
+
+	debugf0("(MC node=%d,mc_type='%s')\n",
+		get_mc_node_id_from_pdev(pdev),
+		get_amd_family_name(mc_type->driver_data));
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0)
+		ret = -EIO;
+	else
+		ret = amd64_probe_one_instance(pdev, mc_type->driver_data);
+
+	if (ret < 0)
+		debugf0("ret=%d\n", ret);
+
+	return ret;
+}
+
+static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+
+	/* Remove from EDAC CORE tracking list */
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	pvt = mci->pvt_info;
+
+	amd64_restore_ecc_error_reporting(pvt);
+
+	if (boot_cpu_data.x86 > 0xf)
+		amd64_teardown(pvt);
+
+	amd64_free_mc_sibling_devices(pvt);
+
+	kfree(pvt);
+	mci->pvt_info = NULL;
+
+	mci_lookup[pvt->mc_node_id] = NULL;
+
+	/* Free the EDAC CORE resources */
+	edac_mc_free(mci);
+}
+
+/*
+ * This table is part of the interface for loading drivers for PCI devices. The
+ * PCI core identifies what devices are on a system during boot, and then
+ * inquiry this table to see if this driver is for a given device found.
+ */
+static const struct pci_device_id amd64_pci_table[] __devinitdata = {
+	{
+		.vendor		= PCI_VENDOR_ID_AMD,
+		.device		= PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= K8_CPUS
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_AMD,
+		.device		= PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= F10_CPUS
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_AMD,
+		.device		= PCI_DEVICE_ID_AMD_11H_NB_DRAM,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= F11_CPUS
+	},
+	{0, }
+};
+MODULE_DEVICE_TABLE(pci, amd64_pci_table);
+
+static struct pci_driver amd64_pci_driver = {
+	.name		= EDAC_MOD_STR,
+	.probe		= amd64_init_one_instance,
+	.remove		= __devexit_p(amd64_remove_one_instance),
+	.id_table	= amd64_pci_table,
+};
+
+static void amd64_setup_pci_device(void)
+{
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+
+	if (amd64_ctl_pci)
+		return;
+
+	mci = mci_lookup[0];
+	if (mci) {
+
+		pvt = mci->pvt_info;
+		amd64_ctl_pci =
+			edac_pci_create_generic_ctl(&pvt->dram_f2_ctl->dev,
+						    EDAC_MOD_STR);
+
+		if (!amd64_ctl_pci) {
+			pr_warning("%s(): Unable to create PCI control\n",
+				   __func__);
+
+			pr_warning("%s(): PCI error report via EDAC not set\n",
+				   __func__);
+			}
+	}
+}
+
+static int __init amd64_edac_init(void)
+{
+	int nb, err = -ENODEV;
+
+	edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n");
+
+	opstate_init();
+
+	if (cache_k8_northbridges() < 0)
+		goto err_exit;
+
+	err = pci_register_driver(&amd64_pci_driver);
+	if (err)
+		return err;
+
+	/*
+	 * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd
+	 * amd64_pvt structs. These will be used in the 2nd stage init function
+	 * to finish initialization of the MC instances.
+	 */
+	for (nb = 0; nb < num_k8_northbridges; nb++) {
+		if (!pvt_lookup[nb])
+			continue;
+
+		err = amd64_init_2nd_stage(pvt_lookup[nb]);
+		if (err)
+			goto err_exit;
+	}
+
+	amd64_setup_pci_device();
+
+	return 0;
+
+err_exit:
+	debugf0("'finish_setup' stage failed\n");
+	pci_unregister_driver(&amd64_pci_driver);
+
+	return err;
+}
+
+static void __exit amd64_edac_exit(void)
+{
+	if (amd64_ctl_pci)
+		edac_pci_release_generic_ctl(amd64_ctl_pci);
+
+	pci_unregister_driver(&amd64_pci_driver);
+}
+
+module_init(amd64_edac_init);
+module_exit(amd64_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("SoftwareBitMaker: Doug Thompson, "
+		"Dave Peterson, Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for AMD64 memory controllers - "
+		EDAC_AMD64_VERSION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
new file mode 100644
index 00000000000..a159957e167
--- /dev/null
+++ b/drivers/edac/amd64_edac.h
@@ -0,0 +1,644 @@
+/*
+ * AMD64 class Memory Controller kernel module
+ *
+ * Copyright (c) 2009 SoftwareBitMaker.
+ * Copyright (c) 2009 Advanced Micro Devices, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ *	Originally Written by Thayne Harbaugh
+ *
+ *      Changes by Douglas "norsk" Thompson  <dougthompson@xmission.com>:
+ *		- K8 CPU Revision D and greater support
+ *
+ *      Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
+ *		- Module largely rewritten, with new (and hopefully correct)
+ *		code for dealing with node and chip select interleaving,
+ *		various code cleanup, and bug fixes
+ *		- Added support for memory hoisting using DRAM hole address
+ *		register
+ *
+ *	Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
+ *		-K8 Rev (1207) revision support added, required Revision
+ *		specific mini-driver code to support Rev F as well as
+ *		prior revisions
+ *
+ *	Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
+ *		-Family 10h revision support added. New PCI Device IDs,
+ *		indicating new changes. Actual registers modified
+ *		were slight, less than the Rev E to Rev F transition
+ *		but changing the PCI Device ID was the proper thing to
+ *		do, as it provides for almost automactic family
+ *		detection. The mods to Rev F required more family
+ *		information detection.
+ *
+ *	Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
+ *		- misc fixes and code cleanups
+ *
+ * This module is based on the following documents
+ * (available from http://www.amd.com/):
+ *
+ *	Title:	BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
+ *		Opteron Processors
+ *	AMD publication #: 26094
+ *`	Revision: 3.26
+ *
+ *	Title:	BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
+ *		Processors
+ *	AMD publication #: 32559
+ *	Revision: 3.00
+ *	Issue Date: May 2006
+ *
+ *	Title:	BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
+ *		Processors
+ *	AMD publication #: 31116
+ *	Revision: 3.00
+ *	Issue Date: September 07, 2007
+ *
+ * Sections in the first 2 documents are no longer in sync with each other.
+ * The Family 10h BKDG was totally re-written from scratch with a new
+ * presentation model.
+ * Therefore, comments that refer to a Document section might be off.
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/mmzone.h>
+#include <linux/edac.h>
+#include <asm/msr.h>
+#include "edac_core.h"
+
+#define amd64_printk(level, fmt, arg...) \
+	edac_printk(level, "amd64", fmt, ##arg)
+
+#define amd64_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg)
+
+/*
+ * Throughout the comments in this code, the following terms are used:
+ *
+ *	SysAddr, DramAddr, and InputAddr
+ *
+ *  These terms come directly from the amd64 documentation
+ * (AMD publication #26094).  They are defined as follows:
+ *
+ *     SysAddr:
+ *         This is a physical address generated by a CPU core or a device
+ *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
+ *         a virtual to physical address translation by the CPU core's address
+ *         translation mechanism (MMU).
+ *
+ *     DramAddr:
+ *         A DramAddr is derived from a SysAddr by subtracting an offset that
+ *         depends on which node the SysAddr maps to and whether the SysAddr
+ *         is within a range affected by memory hoisting.  The DRAM Base
+ *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
+ *         determine which node a SysAddr maps to.
+ *
+ *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
+ *         is within the range of addresses specified by this register, then
+ *         a value x from the DHAR is subtracted from the SysAddr to produce a
+ *         DramAddr.  Here, x represents the base address for the node that
+ *         the SysAddr maps to plus an offset due to memory hoisting.  See
+ *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
+ *         sys_addr_to_dram_addr() below for more information.
+ *
+ *         If the SysAddr is not affected by the DHAR then a value y is
+ *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
+ *         base address for the node that the SysAddr maps to.  See section
+ *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
+ *         information.
+ *
+ *     InputAddr:
+ *         A DramAddr is translated to an InputAddr before being passed to the
+ *         memory controller for the node that the DramAddr is associated
+ *         with.  The memory controller then maps the InputAddr to a csrow.
+ *         If node interleaving is not in use, then the InputAddr has the same
+ *         value as the DramAddr.  Otherwise, the InputAddr is produced by
+ *         discarding the bits used for node interleaving from the DramAddr.
+ *         See section 3.4.4 for more information.
+ *
+ *         The memory controller for a given node uses its DRAM CS Base and
+ *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
+ *         sections 3.5.4 and 3.5.5 for more information.
+ */
+
+#define EDAC_AMD64_VERSION		" Ver: 3.2.0 " __DATE__
+#define EDAC_MOD_STR			"amd64_edac"
+
+/* Extended Model from CPUID, for CPU Revision numbers */
+#define OPTERON_CPU_LE_REV_C		0
+#define OPTERON_CPU_REV_D		1
+#define OPTERON_CPU_REV_E		2
+
+/* NPT processors have the following Extended Models */
+#define OPTERON_CPU_REV_F		4
+#define OPTERON_CPU_REV_FA		5
+
+/* Hardware limit on ChipSelect rows per MC and processors per system */
+#define CHIPSELECT_COUNT		8
+#define DRAM_REG_COUNT			8
+
+
+/*
+ * PCI-defined configuration space registers
+ */
+
+
+/*
+ * Function 1 - Address Map
+ */
+#define K8_DRAM_BASE_LOW		0x40
+#define K8_DRAM_LIMIT_LOW		0x44
+#define K8_DHAR				0xf0
+
+#define DHAR_VALID			BIT(0)
+#define F10_DRAM_MEM_HOIST_VALID	BIT(1)
+
+#define DHAR_BASE_MASK			0xff000000
+#define dhar_base(dhar)			(dhar & DHAR_BASE_MASK)
+
+#define K8_DHAR_OFFSET_MASK		0x0000ff00
+#define k8_dhar_offset(dhar)		((dhar & K8_DHAR_OFFSET_MASK) << 16)
+
+#define F10_DHAR_OFFSET_MASK		0x0000ff80
+					/* NOTE: Extra mask bit vs K8 */
+#define f10_dhar_offset(dhar)		((dhar & F10_DHAR_OFFSET_MASK) << 16)
+
+
+/* F10 High BASE/LIMIT registers */
+#define F10_DRAM_BASE_HIGH		0x140
+#define F10_DRAM_LIMIT_HIGH		0x144
+
+
+/*
+ * Function 2 - DRAM controller
+ */
+#define K8_DCSB0			0x40
+#define F10_DCSB1			0x140
+
+#define K8_DCSB_CS_ENABLE		BIT(0)
+#define K8_DCSB_NPT_SPARE		BIT(1)
+#define K8_DCSB_NPT_TESTFAIL		BIT(2)
+
+/*
+ * REV E: select [31:21] and [15:9] from DCSB and the shift amount to form
+ * the address
+ */
+#define REV_E_DCSB_BASE_BITS		(0xFFE0FE00ULL)
+#define REV_E_DCS_SHIFT			4
+#define REV_E_DCSM_COUNT		8
+
+#define REV_F_F1Xh_DCSB_BASE_BITS	(0x1FF83FE0ULL)
+#define REV_F_F1Xh_DCS_SHIFT		8
+
+/*
+ * REV F and later: selects [28:19] and [13:5] from DCSB and the shift amount
+ * to form the address
+ */
+#define REV_F_DCSB_BASE_BITS		(0x1FF83FE0ULL)
+#define REV_F_DCS_SHIFT			8
+#define REV_F_DCSM_COUNT		4
+#define F10_DCSM_COUNT			4
+#define F11_DCSM_COUNT			2
+
+/* DRAM CS Mask Registers */
+#define K8_DCSM0			0x60
+#define F10_DCSM1			0x160
+
+/* REV E: select [29:21] and [15:9] from DCSM */
+#define REV_E_DCSM_MASK_BITS		0x3FE0FE00
+
+/* unused bits [24:20] and [12:0] */
+#define REV_E_DCS_NOTUSED_BITS		0x01F01FFF
+
+/* REV F and later: select [28:19] and [13:5] from DCSM */
+#define REV_F_F1Xh_DCSM_MASK_BITS	0x1FF83FE0
+
+/* unused bits [26:22] and [12:0] */
+#define REV_F_F1Xh_DCS_NOTUSED_BITS	0x07C01FFF
+
+#define DBAM0				0x80
+#define DBAM1				0x180
+
+/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
+#define DBAM_DIMM(i, reg)		((((reg) >> (4*i))) & 0xF)
+
+#define DBAM_MAX_VALUE			11
+
+
+#define F10_DCLR_0			0x90
+#define F10_DCLR_1			0x190
+#define REVE_WIDTH_128			BIT(16)
+#define F10_WIDTH_128			BIT(11)
+
+
+#define F10_DCHR_0			0x94
+#define F10_DCHR_1			0x194
+
+#define F10_DCHR_FOUR_RANK_DIMM		BIT(18)
+#define F10_DCHR_Ddr3Mode		BIT(8)
+#define F10_DCHR_MblMode		BIT(6)
+
+
+#define F10_DCTL_SEL_LOW		0x110
+
+#define dct_sel_baseaddr(pvt)    \
+	((pvt->dram_ctl_select_low) & 0xFFFFF800)
+
+#define dct_sel_interleave_addr(pvt)    \
+	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
+
+enum {
+	F10_DCTL_SEL_LOW_DctSelHiRngEn	= BIT(0),
+	F10_DCTL_SEL_LOW_DctSelIntLvEn	= BIT(2),
+	F10_DCTL_SEL_LOW_DctGangEn	= BIT(4),
+	F10_DCTL_SEL_LOW_DctDatIntLv	= BIT(5),
+	F10_DCTL_SEL_LOW_DramEnable	= BIT(8),
+	F10_DCTL_SEL_LOW_MemCleared	= BIT(10),
+};
+
+#define    dct_high_range_enabled(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
+
+#define dct_interleave_enabled(pvt)	   \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
+
+#define dct_ganging_enabled(pvt)        \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
+
+#define dct_data_intlv_enabled(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
+
+#define dct_dram_enabled(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
+
+#define dct_memory_cleared(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
+
+
+#define F10_DCTL_SEL_HIGH		0x114
+
+
+/*
+ * Function 3 - Misc Control
+ */
+#define K8_NBCTL			0x40
+
+/* Correctable ECC error reporting enable */
+#define K8_NBCTL_CECCEn			BIT(0)
+
+/* UnCorrectable ECC error reporting enable */
+#define K8_NBCTL_UECCEn			BIT(1)
+
+#define K8_NBCFG			0x44
+#define K8_NBCFG_CHIPKILL		BIT(23)
+#define K8_NBCFG_ECC_ENABLE		BIT(22)
+
+#define K8_NBSL				0x48
+
+
+#define EXTRACT_HIGH_SYNDROME(x)	(((x) >> 24) & 0xff)
+#define EXTRACT_EXT_ERROR_CODE(x)	(((x) >> 16) & 0x1f)
+
+/* Family F10h: Normalized Extended Error Codes */
+#define F10_NBSL_EXT_ERR_RES		0x0
+#define F10_NBSL_EXT_ERR_CRC		0x1
+#define F10_NBSL_EXT_ERR_SYNC		0x2
+#define F10_NBSL_EXT_ERR_MST		0x3
+#define F10_NBSL_EXT_ERR_TGT		0x4
+#define F10_NBSL_EXT_ERR_GART		0x5
+#define F10_NBSL_EXT_ERR_RMW		0x6
+#define F10_NBSL_EXT_ERR_WDT		0x7
+#define F10_NBSL_EXT_ERR_ECC		0x8
+#define F10_NBSL_EXT_ERR_DEV		0x9
+#define F10_NBSL_EXT_ERR_LINK_DATA	0xA
+
+/* Next two are overloaded values */
+#define F10_NBSL_EXT_ERR_LINK_PROTO	0xB
+#define F10_NBSL_EXT_ERR_L3_PROTO	0xB
+
+#define F10_NBSL_EXT_ERR_NB_ARRAY	0xC
+#define F10_NBSL_EXT_ERR_DRAM_PARITY	0xD
+#define F10_NBSL_EXT_ERR_LINK_RETRY	0xE
+
+/* Next two are overloaded values */
+#define F10_NBSL_EXT_ERR_GART_WALK	0xF
+#define F10_NBSL_EXT_ERR_DEV_WALK	0xF
+
+/* 0x10 to 0x1B: Reserved */
+#define F10_NBSL_EXT_ERR_L3_DATA	0x1C
+#define F10_NBSL_EXT_ERR_L3_TAG		0x1D
+#define F10_NBSL_EXT_ERR_L3_LRU		0x1E
+
+/* K8: Normalized Extended Error Codes */
+#define K8_NBSL_EXT_ERR_ECC		0x0
+#define K8_NBSL_EXT_ERR_CRC		0x1
+#define K8_NBSL_EXT_ERR_SYNC		0x2
+#define K8_NBSL_EXT_ERR_MST		0x3
+#define K8_NBSL_EXT_ERR_TGT		0x4
+#define K8_NBSL_EXT_ERR_GART		0x5
+#define K8_NBSL_EXT_ERR_RMW		0x6
+#define K8_NBSL_EXT_ERR_WDT		0x7
+#define K8_NBSL_EXT_ERR_CHIPKILL_ECC	0x8
+#define K8_NBSL_EXT_ERR_DRAM_PARITY	0xD
+
+#define EXTRACT_ERROR_CODE(x)		((x) & 0xffff)
+#define	TEST_TLB_ERROR(x)		(((x) & 0xFFF0) == 0x0010)
+#define	TEST_MEM_ERROR(x)		(((x) & 0xFF00) == 0x0100)
+#define	TEST_BUS_ERROR(x)		(((x) & 0xF800) == 0x0800)
+#define	EXTRACT_TT_CODE(x)		(((x) >> 2) & 0x3)
+#define	EXTRACT_II_CODE(x)		(((x) >> 2) & 0x3)
+#define	EXTRACT_LL_CODE(x)		(((x) >> 0) & 0x3)
+#define	EXTRACT_RRRR_CODE(x)		(((x) >> 4) & 0xf)
+#define	EXTRACT_TO_CODE(x)		(((x) >> 8) & 0x1)
+#define	EXTRACT_PP_CODE(x)		(((x) >> 9) & 0x3)
+
+/*
+ * The following are for BUS type errors AFTER values have been normalized by
+ * shifting right
+ */
+#define K8_NBSL_PP_SRC			0x0
+#define K8_NBSL_PP_RES			0x1
+#define K8_NBSL_PP_OBS			0x2
+#define K8_NBSL_PP_GENERIC		0x3
+
+
+#define K8_NBSH				0x4C
+
+#define K8_NBSH_VALID_BIT		BIT(31)
+#define K8_NBSH_OVERFLOW		BIT(30)
+#define K8_NBSH_UNCORRECTED_ERR		BIT(29)
+#define K8_NBSH_ERR_ENABLE		BIT(28)
+#define K8_NBSH_MISC_ERR_VALID		BIT(27)
+#define K8_NBSH_VALID_ERROR_ADDR	BIT(26)
+#define K8_NBSH_PCC			BIT(25)
+#define K8_NBSH_CECC			BIT(14)
+#define K8_NBSH_UECC			BIT(13)
+#define K8_NBSH_ERR_SCRUBER		BIT(8)
+#define K8_NBSH_CORE3			BIT(3)
+#define K8_NBSH_CORE2			BIT(2)
+#define K8_NBSH_CORE1			BIT(1)
+#define K8_NBSH_CORE0			BIT(0)
+
+#define EXTRACT_LDT_LINK(x)		(((x) >> 4) & 0x7)
+#define EXTRACT_ERR_CPU_MAP(x)		((x) & 0xF)
+#define EXTRACT_LOW_SYNDROME(x)		(((x) >> 15) & 0xff)
+
+
+#define K8_NBEAL			0x50
+#define K8_NBEAH			0x54
+#define K8_SCRCTRL			0x58
+
+#define F10_NB_CFG_LOW			0x88
+#define	F10_NB_CFG_LOW_ENABLE_EXT_CFG	BIT(14)
+
+#define F10_NB_CFG_HIGH			0x8C
+
+#define F10_ONLINE_SPARE		0xB0
+#define F10_ONLINE_SPARE_SWAPDONE0(x)	((x) & BIT(1))
+#define F10_ONLINE_SPARE_SWAPDONE1(x)	((x) & BIT(3))
+#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007)
+#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007)
+
+#define F10_NB_ARRAY_ADDR		0xB8
+
+#define F10_NB_ARRAY_DRAM_ECC		0x80000000
+
+/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
+#define SET_NB_ARRAY_ADDRESS(section)	(((section) & 0x3) << 1)
+
+#define F10_NB_ARRAY_DATA		0xBC
+
+#define SET_NB_DRAM_INJECTION_WRITE(word, bits)  \
+					(BIT(((word) & 0xF) + 20) | \
+					BIT(17) |  \
+					((bits) & 0xF))
+
+#define SET_NB_DRAM_INJECTION_READ(word, bits)  \
+					(BIT(((word) & 0xF) + 20) | \
+					BIT(16) |  \
+					((bits) & 0xF))
+
+#define K8_NBCAP			0xE8
+#define K8_NBCAP_CORES			(BIT(12)|BIT(13))
+#define K8_NBCAP_CHIPKILL		BIT(4)
+#define K8_NBCAP_SECDED			BIT(3)
+#define K8_NBCAP_8_NODE			BIT(2)
+#define K8_NBCAP_DUAL_NODE		BIT(1)
+#define K8_NBCAP_DCT_DUAL		BIT(0)
+
+/*
+ * MSR Regs
+ */
+#define K8_MSR_MCGCTL			0x017b
+#define K8_MSR_MCGCTL_NBE		BIT(4)
+
+#define K8_MSR_MC4CTL			0x0410
+#define K8_MSR_MC4STAT			0x0411
+#define K8_MSR_MC4ADDR			0x0412
+
+/* AMD sets the first MC device at device ID 0x18. */
+static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+{
+	return PCI_SLOT(pdev->devfn) - 0x18;
+}
+
+enum amd64_chipset_families {
+	K8_CPUS = 0,
+	F10_CPUS,
+	F11_CPUS,
+};
+
+/*
+ * Structure to hold:
+ *
+ * 1) dynamically read status and error address HW registers
+ * 2) sysfs entered values
+ * 3) MCE values
+ *
+ * Depends on entry into the modules
+ */
+struct amd64_error_info_regs {
+	u32 nbcfg;
+	u32 nbsh;
+	u32 nbsl;
+	u32 nbeah;
+	u32 nbeal;
+};
+
+/* Error injection control structure */
+struct error_injection {
+	u32	section;
+	u32	word;
+	u32	bit_map;
+};
+
+struct amd64_pvt {
+	/* pci_device handles which we utilize */
+	struct pci_dev *addr_f1_ctl;
+	struct pci_dev *dram_f2_ctl;
+	struct pci_dev *misc_f3_ctl;
+
+	int mc_node_id;		/* MC index of this MC node */
+	int ext_model;		/* extended model value of this node */
+
+	struct low_ops *ops;	/* pointer to per PCI Device ID func table */
+
+	int channel_count;
+
+	/* Raw registers */
+	u32 dclr0;		/* DRAM Configuration Low DCT0 reg */
+	u32 dclr1;		/* DRAM Configuration Low DCT1 reg */
+	u32 dchr0;		/* DRAM Configuration High DCT0 reg */
+	u32 dchr1;		/* DRAM Configuration High DCT1 reg */
+	u32 nbcap;		/* North Bridge Capabilities */
+	u32 nbcfg;		/* F10 North Bridge Configuration */
+	u32 ext_nbcfg;		/* Extended F10 North Bridge Configuration */
+	u32 dhar;		/* DRAM Hoist reg */
+	u32 dbam0;		/* DRAM Base Address Mapping reg for DCT0 */
+	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
+
+	/* DRAM CS Base Address Registers F2x[1,0][5C:40] */
+	u32 dcsb0[CHIPSELECT_COUNT];
+	u32 dcsb1[CHIPSELECT_COUNT];
+
+	/* DRAM CS Mask Registers F2x[1,0][6C:60] */
+	u32 dcsm0[CHIPSELECT_COUNT];
+	u32 dcsm1[CHIPSELECT_COUNT];
+
+	/*
+	 * Decoded parts of DRAM BASE and LIMIT Registers
+	 * F1x[78,70,68,60,58,50,48,40]
+	 */
+	u64 dram_base[DRAM_REG_COUNT];
+	u64 dram_limit[DRAM_REG_COUNT];
+	u8  dram_IntlvSel[DRAM_REG_COUNT];
+	u8  dram_IntlvEn[DRAM_REG_COUNT];
+	u8  dram_DstNode[DRAM_REG_COUNT];
+	u8  dram_rw_en[DRAM_REG_COUNT];
+
+	/*
+	 * The following fields are set at (load) run time, after CPU revision
+	 * has been determined, since the dct_base and dct_mask registers vary
+	 * based on revision
+	 */
+	u32 dcsb_base;		/* DCSB base bits */
+	u32 dcsm_mask;		/* DCSM mask bits */
+	u32 num_dcsm;		/* Number of DCSM registers */
+	u32 dcs_mask_notused;	/* DCSM notused mask bits */
+	u32 dcs_shift;		/* DCSB and DCSM shift value */
+
+	u64 top_mem;		/* top of memory below 4GB */
+	u64 top_mem2;		/* top of memory above 4GB */
+
+	u32 dram_ctl_select_low;	/* DRAM Controller Select Low Reg */
+	u32 dram_ctl_select_high;	/* DRAM Controller Select High Reg */
+	u32 online_spare;               /* On-Line spare Reg */
+
+	/* temp storage for when input is received from sysfs */
+	struct amd64_error_info_regs ctl_error_info;
+
+	/* place to store error injection parameters prior to issue */
+	struct error_injection injection;
+
+	/* Save old hw registers' values before we modified them */
+	u32 nbctl_mcgctl_saved;		/* When true, following 2 are valid */
+	u32 old_nbctl;
+	unsigned long old_mcgctl;	/* per core on this node */
+
+	/* MC Type Index value: socket F vs Family 10h */
+	u32 mc_type_index;
+
+	/* misc settings */
+	struct flags {
+		unsigned long cf8_extcfg:1;
+	} flags;
+};
+
+struct scrubrate {
+       u32 scrubval;           /* bit pattern for scrub rate */
+       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
+};
+
+extern struct scrubrate scrubrates[23];
+extern u32 revf_quad_ddr2_shift[16];
+extern const char *tt_msgs[4];
+extern const char *ll_msgs[4];
+extern const char *rrrr_msgs[16];
+extern const char *to_msgs[2];
+extern const char *pp_msgs[4];
+extern const char *ii_msgs[4];
+extern const char *ext_msgs[32];
+extern const char *htlink_msgs[8];
+
+#ifdef CONFIG_EDAC_DEBUG
+#define NUM_DBG_ATTRS 9
+#else
+#define NUM_DBG_ATTRS 0
+#endif
+
+#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
+#define NUM_INJ_ATTRS 5
+#else
+#define NUM_INJ_ATTRS 0
+#endif
+
+extern struct mcidev_sysfs_attribute amd64_dbg_attrs[NUM_DBG_ATTRS],
+				     amd64_inj_attrs[NUM_INJ_ATTRS];
+
+/*
+ * Each of the PCI Device IDs types have their own set of hardware accessor
+ * functions and per device encoding/decoding logic.
+ */
+struct low_ops {
+	int (*probe_valid_hardware)(struct amd64_pvt *pvt);
+	int (*early_channel_count)(struct amd64_pvt *pvt);
+
+	u64 (*get_error_address)(struct mem_ctl_info *mci,
+			struct amd64_error_info_regs *info);
+	void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
+	void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
+	void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
+					struct amd64_error_info_regs *info,
+					u64 SystemAddr);
+	int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
+};
+
+struct amd64_family_type {
+	const char *ctl_name;
+	u16 addr_f1_ctl;
+	u16 misc_f3_ctl;
+	struct low_ops ops;
+};
+
+static struct amd64_family_type amd64_family_types[];
+
+static inline const char *get_amd_family_name(int index)
+{
+	return amd64_family_types[index].ctl_name;
+}
+
+static inline struct low_ops *family_ops(int index)
+{
+	return &amd64_family_types[index].ops;
+}
+
+/*
+ * For future CPU versions, verify the following as new 'slow' rates appear and
+ * modify the necessary skip values for the supported CPU.
+ */
+#define K8_MIN_SCRUB_RATE_BITS	0x0
+#define F10_MIN_SCRUB_RATE_BITS	0x5
+#define F11_MIN_SCRUB_RATE_BITS	0x6
+
+int amd64_process_error_info(struct mem_ctl_info *mci,
+			     struct amd64_error_info_regs *info,
+			     int handle_errors);
+int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
+			     u64 *hole_offset, u64 *hole_size);
diff --git a/drivers/edac/amd64_edac_dbg.c b/drivers/edac/amd64_edac_dbg.c
new file mode 100644
index 00000000000..0a41b248a4a
--- /dev/null
+++ b/drivers/edac/amd64_edac_dbg.c
@@ -0,0 +1,255 @@
+#include "amd64_edac.h"
+
+/*
+ * accept a hex value and store it into the virtual error register file, field:
+ * nbeal and nbeah. Assume virtual error values have already been set for: NBSL,
+ * NBSH and NBCFG. Then proceed to map the error values to a MC, CSROW and
+ * CHANNEL
+ */
+static ssize_t amd64_nbea_store(struct mem_ctl_info *mci, const char *data,
+				size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long long value;
+	int ret = 0;
+
+	ret = strict_strtoull(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBEA= 0x%llx\n", value);
+
+		/* place the value into the virtual error packet */
+		pvt->ctl_error_info.nbeal = (u32) value;
+		value >>= 32;
+		pvt->ctl_error_info.nbeah = (u32) value;
+
+		/* Process the Mapping request */
+		/* TODO: Add race prevention */
+		amd64_process_error_info(mci, &pvt->ctl_error_info, 1);
+
+		return count;
+	}
+	return ret;
+}
+
+/* display back what the last NBEA (MCA NB Address (MC4_ADDR)) was written */
+static ssize_t amd64_nbea_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u64 value;
+
+	value = pvt->ctl_error_info.nbeah;
+	value <<= 32;
+	value |= pvt->ctl_error_info.nbeal;
+
+	return sprintf(data, "%llx\n", value);
+}
+
+/* store the NBSL (MCA NB Status Low (MC4_STATUS)) value user desires */
+static ssize_t amd64_nbsl_store(struct mem_ctl_info *mci, const char *data,
+				size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBSL= 0x%lx\n", value);
+
+		pvt->ctl_error_info.nbsl = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/* display back what the last NBSL value written */
+static ssize_t amd64_nbsl_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 value;
+
+	value = pvt->ctl_error_info.nbsl;
+
+	return sprintf(data, "%x\n", value);
+}
+
+/* store the NBSH (MCA NB Status High) value user desires */
+static ssize_t amd64_nbsh_store(struct mem_ctl_info *mci, const char *data,
+				size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBSH= 0x%lx\n", value);
+
+		pvt->ctl_error_info.nbsh = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/* display back what the last NBSH value written */
+static ssize_t amd64_nbsh_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 value;
+
+	value = pvt->ctl_error_info.nbsh;
+
+	return sprintf(data, "%x\n", value);
+}
+
+/* accept and store the NBCFG (MCA NB Configuration) value user desires */
+static ssize_t amd64_nbcfg_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBCFG= 0x%lx\n", value);
+
+		pvt->ctl_error_info.nbcfg = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/* various show routines for the controls of a MCI */
+static ssize_t amd64_nbcfg_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%x\n", pvt->ctl_error_info.nbcfg);
+}
+
+
+static ssize_t amd64_dhar_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%x\n", pvt->dhar);
+}
+
+
+static ssize_t amd64_dbam_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%x\n", pvt->dbam0);
+}
+
+
+static ssize_t amd64_topmem_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%llx\n", pvt->top_mem);
+}
+
+
+static ssize_t amd64_topmem2_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%llx\n", pvt->top_mem2);
+}
+
+static ssize_t amd64_hole_show(struct mem_ctl_info *mci, char *data)
+{
+	u64 hole_base = 0;
+	u64 hole_offset = 0;
+	u64 hole_size = 0;
+
+	amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size);
+
+	return sprintf(data, "%llx %llx %llx\n", hole_base, hole_offset,
+						 hole_size);
+}
+
+/*
+ * update NUM_DBG_ATTRS in case you add new members
+ */
+struct mcidev_sysfs_attribute amd64_dbg_attrs[] = {
+
+	{
+		.attr = {
+			.name = "nbea_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbea_show,
+		.store = amd64_nbea_store,
+	},
+	{
+		.attr = {
+			.name = "nbsl_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbsl_show,
+		.store = amd64_nbsl_store,
+	},
+	{
+		.attr = {
+			.name = "nbsh_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbsh_show,
+		.store = amd64_nbsh_store,
+	},
+	{
+		.attr = {
+			.name = "nbcfg_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbcfg_show,
+		.store = amd64_nbcfg_store,
+	},
+	{
+		.attr = {
+			.name = "dhar",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_dhar_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "dbam",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_dbam_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "topmem",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_topmem_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "topmem2",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_topmem2_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "dram_hole",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_hole_show,
+		.store = NULL,
+	},
+};
diff --git a/drivers/edac/amd64_edac_err_types.c b/drivers/edac/amd64_edac_err_types.c
new file mode 100644
index 00000000000..f212ff12a9d
--- /dev/null
+++ b/drivers/edac/amd64_edac_err_types.c
@@ -0,0 +1,161 @@
+#include "amd64_edac.h"
+
+/*
+ * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
+ * for DDR2 DRAM mapping.
+ */
+u32 revf_quad_ddr2_shift[] = {
+	0,	/* 0000b NULL DIMM (128mb) */
+	28,	/* 0001b 256mb */
+	29,	/* 0010b 512mb */
+	29,	/* 0011b 512mb */
+	29,	/* 0100b 512mb */
+	30,	/* 0101b 1gb */
+	30,	/* 0110b 1gb */
+	31,	/* 0111b 2gb */
+	31,	/* 1000b 2gb */
+	32,	/* 1001b 4gb */
+	32,	/* 1010b 4gb */
+	33,	/* 1011b 8gb */
+	0,	/* 1100b future */
+	0,	/* 1101b future */
+	0,	/* 1110b future */
+	0	/* 1111b future */
+};
+
+/*
+ * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
+ * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
+ * or higher value'.
+ *
+ *FIXME: Produce a better mapping/linearisation.
+ */
+
+struct scrubrate scrubrates[] = {
+	{ 0x01, 1600000000UL},
+	{ 0x02, 800000000UL},
+	{ 0x03, 400000000UL},
+	{ 0x04, 200000000UL},
+	{ 0x05, 100000000UL},
+	{ 0x06, 50000000UL},
+	{ 0x07, 25000000UL},
+	{ 0x08, 12284069UL},
+	{ 0x09, 6274509UL},
+	{ 0x0A, 3121951UL},
+	{ 0x0B, 1560975UL},
+	{ 0x0C, 781440UL},
+	{ 0x0D, 390720UL},
+	{ 0x0E, 195300UL},
+	{ 0x0F, 97650UL},
+	{ 0x10, 48854UL},
+	{ 0x11, 24427UL},
+	{ 0x12, 12213UL},
+	{ 0x13, 6101UL},
+	{ 0x14, 3051UL},
+	{ 0x15, 1523UL},
+	{ 0x16, 761UL},
+	{ 0x00, 0UL},        /* scrubbing off */
+};
+
+/*
+ * string representation for the different MCA reported error types, see F3x48
+ * or MSR0000_0411.
+ */
+const char *tt_msgs[] = {        /* transaction type */
+	"instruction",
+	"data",
+	"generic",
+	"reserved"
+};
+
+const char *ll_msgs[] = {	/* cache level */
+	"L0",
+	"L1",
+	"L2",
+	"L3/generic"
+};
+
+const char *rrrr_msgs[] = {
+	"generic",
+	"generic read",
+	"generic write",
+	"data read",
+	"data write",
+	"inst fetch",
+	"prefetch",
+	"evict",
+	"snoop",
+	"reserved RRRR= 9",
+	"reserved RRRR= 10",
+	"reserved RRRR= 11",
+	"reserved RRRR= 12",
+	"reserved RRRR= 13",
+	"reserved RRRR= 14",
+	"reserved RRRR= 15"
+};
+
+const char *pp_msgs[] = {	/* participating processor */
+	"local node originated (SRC)",
+	"local node responded to request (RES)",
+	"local node observed as 3rd party (OBS)",
+	"generic"
+};
+
+const char *to_msgs[] = {
+	"no timeout",
+	"timed out"
+};
+
+const char *ii_msgs[] = {	/* memory or i/o */
+	"mem access",
+	"reserved",
+	"i/o access",
+	"generic"
+};
+
+/* Map the 5 bits of Extended Error code to the string table. */
+const char *ext_msgs[] = {	/* extended error */
+	"K8 ECC error/F10 reserved",	/* 0_0000b */
+	"CRC error",			/* 0_0001b */
+	"sync error",			/* 0_0010b */
+	"mst abort",			/* 0_0011b */
+	"tgt abort",			/* 0_0100b */
+	"GART error",			/* 0_0101b */
+	"RMW error",			/* 0_0110b */
+	"Wdog timer error",		/* 0_0111b */
+	"F10-ECC/K8-Chipkill error",	/* 0_1000b */
+	"DEV Error",			/* 0_1001b */
+	"Link Data error",		/* 0_1010b */
+	"Link or L3 Protocol error",	/* 0_1011b */
+	"NB Array error",		/* 0_1100b */
+	"DRAM Parity error",		/* 0_1101b */
+	"Link Retry/GART Table Walk/DEV Table Walk error", /* 0_1110b */
+	"Res 0x0ff error",		/* 0_1111b */
+	"Res 0x100 error",		/* 1_0000b */
+	"Res 0x101 error",		/* 1_0001b */
+	"Res 0x102 error",		/* 1_0010b */
+	"Res 0x103 error",		/* 1_0011b */
+	"Res 0x104 error",		/* 1_0100b */
+	"Res 0x105 error",		/* 1_0101b */
+	"Res 0x106 error",		/* 1_0110b */
+	"Res 0x107 error",		/* 1_0111b */
+	"Res 0x108 error",		/* 1_1000b */
+	"Res 0x109 error",		/* 1_1001b */
+	"Res 0x10A error",		/* 1_1010b */
+	"Res 0x10B error",		/* 1_1011b */
+	"L3 Cache Data error",		/* 1_1100b */
+	"L3 CacheTag error",		/* 1_1101b */
+	"L3 Cache LRU error",		/* 1_1110b */
+	"Res 0x1FF error"		/* 1_1111b */
+};
+
+const char *htlink_msgs[] = {
+	"none",
+	"1",
+	"2",
+	"1 2",
+	"3",
+	"1 3",
+	"2 3",
+	"1 2 3"
+};
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
new file mode 100644
index 00000000000..d3675b76b3a
--- /dev/null
+++ b/drivers/edac/amd64_edac_inj.c
@@ -0,0 +1,185 @@
+#include "amd64_edac.h"
+
+/*
+ * store error injection section value which refers to one of 4 16-byte sections
+ * within a 64-byte cacheline
+ *
+ * range: 0..3
+ */
+static ssize_t amd64_inject_section_store(struct mem_ctl_info *mci,
+					  const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+		pvt->injection.section = (u32) value;
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * store error injection word value which refers to one of 9 16-bit word of the
+ * 16-byte (128-bit + ECC bits) section
+ *
+ * range: 0..8
+ */
+static ssize_t amd64_inject_word_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+
+		value = (value <= 8) ? value : 0;
+		pvt->injection.word = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * store 16 bit error injection vector which enables injecting errors to the
+ * corresponding bit within the error injection word above. When used during a
+ * DRAM ECC read, it holds the contents of the of the DRAM ECC bits.
+ */
+static ssize_t amd64_inject_ecc_vector_store(struct mem_ctl_info *mci,
+					     const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+
+		pvt->injection.bit_map = (u32) value & 0xFFFF;
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * Do a DRAM ECC read. Assemble staged values in the pvt area, format into
+ * fields needed by the injection registers and read the NB Array Data Port.
+ */
+static ssize_t amd64_inject_read_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	u32 section, word_bits;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+
+		/* Form value to choose 16-byte section of cacheline */
+		section = F10_NB_ARRAY_DRAM_ECC |
+				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_ADDR, section);
+
+		word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection.word,
+						pvt->injection.bit_map);
+
+		/* Issue 'word' and 'bit' along with the READ request */
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_DATA, word_bits);
+
+		debugf0("section=0x%x word_bits=0x%x\n", section, word_bits);
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * Do a DRAM ECC write. Assemble staged values in the pvt area and format into
+ * fields needed by the injection registers.
+ */
+static ssize_t amd64_inject_write_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	u32 section, word_bits;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+
+		/* Form value to choose 16-byte section of cacheline */
+		section = F10_NB_ARRAY_DRAM_ECC |
+				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_ADDR, section);
+
+		word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection.word,
+						pvt->injection.bit_map);
+
+		/* Issue 'word' and 'bit' along with the READ request */
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_DATA, word_bits);
+
+		debugf0("section=0x%x word_bits=0x%x\n", section, word_bits);
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * update NUM_INJ_ATTRS in case you add new members
+ */
+struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
+
+	{
+		.attr = {
+			.name = "inject_section",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_section_store,
+	},
+	{
+		.attr = {
+			.name = "inject_word",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_word_store,
+	},
+	{
+		.attr = {
+			.name = "inject_ecc_vector",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_ecc_vector_store,
+	},
+	{
+		.attr = {
+			.name = "inject_write",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_write_store,
+	},
+	{
+		.attr = {
+			.name = "inject_read",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_read_store,
+	},
+};
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
index 61469218112..2cb58ef743e 100644
--- a/drivers/edac/amd8111_edac.c
+++ b/drivers/edac/amd8111_edac.c
@@ -389,7 +389,7 @@ static int amd8111_dev_probe(struct pci_dev *dev,
 	dev_info->edac_dev->dev = &dev_info->dev->dev;
 	dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
 	dev_info->edac_dev->ctl_name = dev_info->ctl_name;
-	dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+	dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
 
 	if (edac_op_state == EDAC_OPSTATE_POLL)
 		dev_info->edac_dev->edac_check = dev_info->check;
@@ -473,7 +473,7 @@ static int amd8111_pci_probe(struct pci_dev *dev,
 	pci_info->edac_dev->dev = &pci_info->dev->dev;
 	pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
 	pci_info->edac_dev->ctl_name = pci_info->ctl_name;
-	pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id;
+	pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
 
 	if (edac_op_state == EDAC_OPSTATE_POLL)
 		pci_info->edac_dev->edac_check = pci_info->check;
diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c
index c083b31cac5..b432d60c622 100644
--- a/drivers/edac/amd8131_edac.c
+++ b/drivers/edac/amd8131_edac.c
@@ -287,7 +287,7 @@ static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	dev_info->edac_dev->dev = &dev_info->dev->dev;
 	dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
 	dev_info->edac_dev->ctl_name = dev_info->ctl_name;
-	dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+	dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
 
 	if (edac_op_state == EDAC_OPSTATE_POLL)
 		dev_info->edac_dev->edac_check = amd8131_chipset.check;
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index facfdb1fa71..d205d493a68 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 	struct pci_dev *dev = pvt->dev_d0f1;
 	int enable = 1;
 
-	/* Allow module paramter override, else see if CPU supports parity */
+	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
 	} else if (cpu_id[0] &&
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 6ad95c8d636..48d3b140983 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -76,10 +76,11 @@
 extern int edac_debug_level;
 
 #ifndef CONFIG_EDAC_DEBUG_VERBOSE
-#define edac_debug_printk(level, fmt, arg...)                            \
-	do {                                                             \
-		if (level <= edac_debug_level)                           \
-			edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \
+#define edac_debug_printk(level, fmt, arg...)                           \
+	do {                                                            \
+		if (level <= edac_debug_level)                          \
+			edac_printk(KERN_DEBUG, EDAC_DEBUG,		\
+				    "%s: " fmt, __func__, ##arg);	\
 	} while (0)
 #else  /* CONFIG_EDAC_DEBUG_VERBOSE */
 #define edac_debug_printk(level, fmt, arg...)                            \
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 5f1b5400d96..24c84ae8152 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -596,6 +596,7 @@ int dmi_get_year(int field)
 
 	return year;
 }
+EXPORT_SYMBOL(dmi_get_year);
 
 /**
  *	dmi_walk - Walk the DMI table and get called back for every record
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index edb02530e46..11f373971fa 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -69,7 +69,7 @@ comment "Memory mapped GPIO expanders:"
 
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
-	depends on PPC_OF
+	depends on PPC_OF || MICROBLAZE
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 17b24c580c0..f5d46e7199d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -67,12 +67,18 @@ config DRM_I830
 	  will load the correct one.
 
 config DRM_I915
+	tristate "i915 driver"
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select FB
 	select FRAMEBUFFER_CONSOLE if !EMBEDDED
-	tristate "i915 driver"
+	# i915 depends on ACPI_VIDEO when ACPI is enabled
+	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select VIDEO_OUTPUT_CONTROL if ACPI
+	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select INPUT if ACPI
+	select ACPI_VIDEO if ACPI
 	help
 	  Choose this option if you have a system that has Intel 830M, 845G,
 	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 6d80d17f1e9..80a257554b3 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	}
 	DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n",
 		  (unsigned long long)map->offset, map->size, map->type);
+
+	/* page-align _DRM_SHM maps. They are allocated here so there is no security
+	 * hole created by that and it works around various broken drivers that use
+	 * a non-aligned quantity to map the SAREA. --BenH
+	 */
+	if (map->type == _DRM_SHM)
+		map->size = PAGE_ALIGN(map->size);
+
 	if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) {
 		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
 		return -EINVAL;
@@ -363,7 +371,8 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	list->user_token = list->hash.key << PAGE_SHIFT;
 	mutex_unlock(&dev->struct_mutex);
 
-	list->master = dev->primary->master;
+	if (!(map->flags & _DRM_DRIVER))
+		list->master = dev->primary->master;
 	*maplist = list;
 	return 0;
 	}
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 94a76887173..8fab7890a36 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2294,7 +2294,12 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
 		}
 	}
 
-	if (connector->funcs->set_property)
+	/* Do DPMS ourselves */
+	if (property == connector->dev->mode_config.dpms_property) {
+		if (connector->funcs->dpms)
+			(*connector->funcs->dpms)(connector, (int) out_resp->value);
+		ret = 0;
+	} else if (connector->funcs->set_property)
 		ret = connector->funcs->set_property(connector, property, out_resp->value);
 
 	/* store the property value if succesful */
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 45890447fee..a6f73f1e99d 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -199,6 +199,29 @@ static void drm_helper_add_std_modes(struct drm_device *dev,
 }
 
 /**
+ * drm_helper_encoder_in_use - check if a given encoder is in use
+ * @encoder: encoder to check
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Walk @encoders's DRM device's mode_config and see if it's in use.
+ *
+ * RETURNS:
+ * True if @encoder is part of the mode_config, false otherwise.
+ */
+bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
+{
+	struct drm_connector *connector;
+	struct drm_device *dev = encoder->dev;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->encoder == encoder)
+			return true;
+	return false;
+}
+EXPORT_SYMBOL(drm_helper_encoder_in_use);
+
+/**
  * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
  * @crtc: CRTC to check
  *
@@ -216,7 +239,7 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	/* FIXME: Locking around list access? */
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
-		if (encoder->crtc == crtc)
+		if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
 			return true;
 	return false;
 }
@@ -240,7 +263,7 @@ void drm_helper_disable_unused_functions(struct drm_device *dev)
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		encoder_funcs = encoder->helper_private;
-		if (!encoder->crtc)
+		if (!drm_helper_encoder_in_use(encoder))
 			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
 	}
 
@@ -935,6 +958,88 @@ bool drm_helper_initial_config(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_helper_initial_config);
 
+static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
+{
+	int dpms = DRM_MODE_DPMS_OFF;
+	struct drm_connector *connector;
+	struct drm_device *dev = encoder->dev;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->encoder == encoder)
+			if (connector->dpms < dpms)
+				dpms = connector->dpms;
+	return dpms;
+}
+
+static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
+{
+	int dpms = DRM_MODE_DPMS_OFF;
+	struct drm_connector *connector;
+	struct drm_device *dev = crtc->dev;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->encoder && connector->encoder->crtc == crtc)
+			if (connector->dpms < dpms)
+				dpms = connector->dpms;
+	return dpms;
+}
+
+/**
+ * drm_helper_connector_dpms
+ * @connector affected connector
+ * @mode DPMS mode
+ *
+ * Calls the low-level connector DPMS function, then
+ * calls appropriate encoder and crtc DPMS functions as well
+ */
+void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
+{
+	struct drm_encoder *encoder = connector->encoder;
+	struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
+	int old_dpms;
+
+	if (mode == connector->dpms)
+		return;
+
+	old_dpms = connector->dpms;
+	connector->dpms = mode;
+
+	/* from off to on, do crtc then encoder */
+	if (mode < old_dpms) {
+		if (crtc) {
+			struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+			if (crtc_funcs->dpms)
+				(*crtc_funcs->dpms) (crtc,
+						     drm_helper_choose_crtc_dpms(crtc));
+		}
+		if (encoder) {
+			struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+			if (encoder_funcs->dpms)
+				(*encoder_funcs->dpms) (encoder,
+							drm_helper_choose_encoder_dpms(encoder));
+		}
+	}
+
+	/* from on to off, do encoder then crtc */
+	if (mode > old_dpms) {
+		if (encoder) {
+			struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+			if (encoder_funcs->dpms)
+				(*encoder_funcs->dpms) (encoder,
+							drm_helper_choose_encoder_dpms(encoder));
+		}
+		if (crtc) {
+			struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+			if (crtc_funcs->dpms)
+				(*crtc_funcs->dpms) (crtc,
+						     drm_helper_choose_crtc_dpms(crtc));
+		}
+	}
+
+	return;
+}
+EXPORT_SYMBOL(drm_helper_connector_dpms);
+
 /**
  * drm_hotplug_stage_two
  * @dev DRM device
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index f01def16a66..019b7c57823 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -481,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp,
 		}
 		retcode = func(dev, kdata, file_priv);
 
-		if ((retcode == 0) && (cmd & IOC_OUT)) {
+		if (cmd & IOC_OUT) {
 			if (copy_to_user((void __user *)arg, kdata,
 					 _IOC_SIZE(cmd)) != 0)
 				retcode = -EFAULT;
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index ca9c6165671..801a0d0e081 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -289,6 +289,11 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	struct drm_display_mode *mode;
 	struct detailed_pixel_timing *pt = &timing->data.pixel_data;
 
+	/* ignore tiny modes */
+	if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 ||
+	    ((pt->vactive_hi << 8) | pt->hactive_lo) < 64)
+		return NULL;
+
 	if (pt->stereo) {
 		printk(KERN_WARNING "stereo mode not supported\n");
 		return NULL;
@@ -584,85 +589,13 @@ int drm_do_probe_ddc_edid(struct i2c_adapter *adapter,
 }
 EXPORT_SYMBOL(drm_do_probe_ddc_edid);
 
-/**
- * Get EDID information.
- *
- * \param adapter : i2c device adaptor.
- * \param buf     : EDID data buffer to be filled
- * \param len     : EDID data buffer length
- * \return 0 on success or -1 on failure.
- *
- * Initialize DDC, then fetch EDID information
- * by calling drm_do_probe_ddc_edid function.
- */
-static int drm_ddc_read(struct i2c_adapter *adapter,
-			unsigned char *buf, int len)
-{
-	struct i2c_algo_bit_data *algo_data = adapter->algo_data;
-	int i, j;
-	int ret = -1;
-
-	algo_data->setscl(algo_data->data, 1);
-
-	for (i = 0; i < 1; i++) {
-		/* For some old monitors we need the
-		 * following process to initialize/stop DDC
-		 */
-		algo_data->setsda(algo_data->data, 1);
-		msleep(13);
-
-		algo_data->setscl(algo_data->data, 1);
-		for (j = 0; j < 5; j++) {
-			msleep(10);
-			if (algo_data->getscl(algo_data->data))
-				break;
-		}
-		if (j == 5)
-			continue;
-
-		algo_data->setsda(algo_data->data, 0);
-		msleep(15);
-		algo_data->setscl(algo_data->data, 0);
-		msleep(15);
-		algo_data->setsda(algo_data->data, 1);
-		msleep(15);
-
-		/* Do the real work */
-		ret = drm_do_probe_ddc_edid(adapter, buf, len);
-		algo_data->setsda(algo_data->data, 0);
-		algo_data->setscl(algo_data->data, 0);
-		msleep(15);
-
-		algo_data->setscl(algo_data->data, 1);
-		for (j = 0; j < 10; j++) {
-			msleep(10);
-			if (algo_data->getscl(algo_data->data))
-				break;
-		}
-
-		algo_data->setsda(algo_data->data, 1);
-		msleep(15);
-		algo_data->setscl(algo_data->data, 0);
-		algo_data->setsda(algo_data->data, 0);
-		if (ret == 0)
-			break;
-	}
-	/* Release the DDC lines when done or the Apple Cinema HD display
-	 * will switch off
-	 */
-	algo_data->setsda(algo_data->data, 1);
-	algo_data->setscl(algo_data->data, 1);
-
-	return ret;
-}
-
 static int drm_ddc_read_edid(struct drm_connector *connector,
 			     struct i2c_adapter *adapter,
 			     char *buf, int len)
 {
 	int ret;
 
-	ret = drm_ddc_read(adapter, buf, len);
+	ret = drm_do_probe_ddc_edid(adapter, buf, len);
 	if (ret != 0) {
 		dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
 			 drm_get_connector_name(connector));
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 4984aa89cf3..ec43005100d 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -133,7 +133,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size)
 
 	BUG_ON((size & (PAGE_SIZE - 1)) != 0);
 
-	obj = kcalloc(1, sizeof(*obj), GFP_KERNEL);
+	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
 
 	obj->dev = dev;
 	obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
diff --git a/drivers/gpu/drm/drm_hashtab.c b/drivers/gpu/drm/drm_hashtab.c
index af539f7d87d..ac35145c3e2 100644
--- a/drivers/gpu/drm/drm_hashtab.c
+++ b/drivers/gpu/drm/drm_hashtab.c
@@ -62,6 +62,7 @@ int drm_ht_create(struct drm_open_hash *ht, unsigned int order)
 	}
 	return 0;
 }
+EXPORT_SYMBOL(drm_ht_create);
 
 void drm_ht_verbose_list(struct drm_open_hash *ht, unsigned long key)
 {
@@ -156,6 +157,7 @@ int drm_ht_just_insert_please(struct drm_open_hash *ht, struct drm_hash_item *it
 	}
 	return 0;
 }
+EXPORT_SYMBOL(drm_ht_just_insert_please);
 
 int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key,
 		     struct drm_hash_item **item)
@@ -169,6 +171,7 @@ int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key,
 	*item = hlist_entry(list, struct drm_hash_item, head);
 	return 0;
 }
+EXPORT_SYMBOL(drm_ht_find_item);
 
 int drm_ht_remove_key(struct drm_open_hash *ht, unsigned long key)
 {
@@ -202,3 +205,4 @@ void drm_ht_remove(struct drm_open_hash *ht)
 		ht->table = NULL;
 	}
 }
+EXPORT_SYMBOL(drm_ht_remove);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 93e677a481f..fc8e5acd9d9 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -196,6 +196,7 @@ int drm_irq_install(struct drm_device *dev)
 {
 	int ret = 0;
 	unsigned long sh_flags = 0;
+	char *irqname;
 
 	if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 		return -EINVAL;
@@ -227,8 +228,13 @@ int drm_irq_install(struct drm_device *dev)
 	if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED))
 		sh_flags = IRQF_SHARED;
 
+	if (dev->devname)
+		irqname = dev->devname;
+	else
+		irqname = dev->driver->name;
+
 	ret = request_irq(drm_dev_to_irq(dev), dev->driver->irq_handler,
-			  sh_flags, dev->devname, dev);
+			  sh_flags, irqname, dev);
 
 	if (ret < 0) {
 		mutex_lock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 367c590ffbb..7819fd930a5 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -42,8 +42,11 @@
  */
 
 #include "drmP.h"
+#include "drm_mm.h"
 #include <linux/slab.h>
 
+#define MM_UNUSED_TARGET 4
+
 unsigned long drm_mm_tail_space(struct drm_mm *mm)
 {
 	struct list_head *tail_node;
@@ -74,16 +77,62 @@ int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size)
 	return 0;
 }
 
+static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic)
+{
+	struct drm_mm_node *child;
+
+	if (atomic)
+		child = kmalloc(sizeof(*child), GFP_ATOMIC);
+	else
+		child = kmalloc(sizeof(*child), GFP_KERNEL);
+
+	if (unlikely(child == NULL)) {
+		spin_lock(&mm->unused_lock);
+		if (list_empty(&mm->unused_nodes))
+			child = NULL;
+		else {
+			child =
+			    list_entry(mm->unused_nodes.next,
+				       struct drm_mm_node, fl_entry);
+			list_del(&child->fl_entry);
+			--mm->num_unused;
+		}
+		spin_unlock(&mm->unused_lock);
+	}
+	return child;
+}
+
+int drm_mm_pre_get(struct drm_mm *mm)
+{
+	struct drm_mm_node *node;
+
+	spin_lock(&mm->unused_lock);
+	while (mm->num_unused < MM_UNUSED_TARGET) {
+		spin_unlock(&mm->unused_lock);
+		node = kmalloc(sizeof(*node), GFP_KERNEL);
+		spin_lock(&mm->unused_lock);
+
+		if (unlikely(node == NULL)) {
+			int ret = (mm->num_unused < 2) ? -ENOMEM : 0;
+			spin_unlock(&mm->unused_lock);
+			return ret;
+		}
+		++mm->num_unused;
+		list_add_tail(&node->fl_entry, &mm->unused_nodes);
+	}
+	spin_unlock(&mm->unused_lock);
+	return 0;
+}
+EXPORT_SYMBOL(drm_mm_pre_get);
 
 static int drm_mm_create_tail_node(struct drm_mm *mm,
-			    unsigned long start,
-			    unsigned long size)
+				   unsigned long start,
+				   unsigned long size, int atomic)
 {
 	struct drm_mm_node *child;
 
-	child = (struct drm_mm_node *)
-		drm_alloc(sizeof(*child), DRM_MEM_MM);
-	if (!child)
+	child = drm_mm_kmalloc(mm, atomic);
+	if (unlikely(child == NULL))
 		return -ENOMEM;
 
 	child->free = 1;
@@ -97,8 +146,7 @@ static int drm_mm_create_tail_node(struct drm_mm *mm,
 	return 0;
 }
 
-
-int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size)
+int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size, int atomic)
 {
 	struct list_head *tail_node;
 	struct drm_mm_node *entry;
@@ -106,20 +154,21 @@ int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size)
 	tail_node = mm->ml_entry.prev;
 	entry = list_entry(tail_node, struct drm_mm_node, ml_entry);
 	if (!entry->free) {
-		return drm_mm_create_tail_node(mm, entry->start + entry->size, size);
+		return drm_mm_create_tail_node(mm, entry->start + entry->size,
+					       size, atomic);
 	}
 	entry->size += size;
 	return 0;
 }
 
 static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent,
-					    unsigned long size)
+						 unsigned long size,
+						 int atomic)
 {
 	struct drm_mm_node *child;
 
-	child = (struct drm_mm_node *)
-		drm_alloc(sizeof(*child), DRM_MEM_MM);
-	if (!child)
+	child = drm_mm_kmalloc(parent->mm, atomic);
+	if (unlikely(child == NULL))
 		return NULL;
 
 	INIT_LIST_HEAD(&child->fl_entry);
@@ -151,8 +200,9 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
 		tmp = parent->start % alignment;
 
 	if (tmp) {
-		align_splitoff = drm_mm_split_at_start(parent, alignment - tmp);
-		if (!align_splitoff)
+		align_splitoff =
+		    drm_mm_split_at_start(parent, alignment - tmp, 0);
+		if (unlikely(align_splitoff == NULL))
 			return NULL;
 	}
 
@@ -161,7 +211,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
 		parent->free = 0;
 		return parent;
 	} else {
-		child = drm_mm_split_at_start(parent, size);
+		child = drm_mm_split_at_start(parent, size, 0);
 	}
 
 	if (align_splitoff)
@@ -169,14 +219,49 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
 
 	return child;
 }
+
 EXPORT_SYMBOL(drm_mm_get_block);
 
+struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+					    unsigned long size,
+					    unsigned alignment)
+{
+
+	struct drm_mm_node *align_splitoff = NULL;
+	struct drm_mm_node *child;
+	unsigned tmp = 0;
+
+	if (alignment)
+		tmp = parent->start % alignment;
+
+	if (tmp) {
+		align_splitoff =
+		    drm_mm_split_at_start(parent, alignment - tmp, 1);
+		if (unlikely(align_splitoff == NULL))
+			return NULL;
+	}
+
+	if (parent->size == size) {
+		list_del_init(&parent->fl_entry);
+		parent->free = 0;
+		return parent;
+	} else {
+		child = drm_mm_split_at_start(parent, size, 1);
+	}
+
+	if (align_splitoff)
+		drm_mm_put_block(align_splitoff);
+
+	return child;
+}
+EXPORT_SYMBOL(drm_mm_get_block_atomic);
+
 /*
  * Put a block. Merge with the previous and / or next block if they are free.
  * Otherwise add to the free stack.
  */
 
-void drm_mm_put_block(struct drm_mm_node * cur)
+void drm_mm_put_block(struct drm_mm_node *cur)
 {
 
 	struct drm_mm *mm = cur->mm;
@@ -188,21 +273,27 @@ void drm_mm_put_block(struct drm_mm_node * cur)
 	int merged = 0;
 
 	if (cur_head->prev != root_head) {
-		prev_node = list_entry(cur_head->prev, struct drm_mm_node, ml_entry);
+		prev_node =
+		    list_entry(cur_head->prev, struct drm_mm_node, ml_entry);
 		if (prev_node->free) {
 			prev_node->size += cur->size;
 			merged = 1;
 		}
 	}
 	if (cur_head->next != root_head) {
-		next_node = list_entry(cur_head->next, struct drm_mm_node, ml_entry);
+		next_node =
+		    list_entry(cur_head->next, struct drm_mm_node, ml_entry);
 		if (next_node->free) {
 			if (merged) {
 				prev_node->size += next_node->size;
 				list_del(&next_node->ml_entry);
 				list_del(&next_node->fl_entry);
-				drm_free(next_node, sizeof(*next_node),
-					 DRM_MEM_MM);
+				if (mm->num_unused < MM_UNUSED_TARGET) {
+					list_add(&next_node->fl_entry,
+						 &mm->unused_nodes);
+					++mm->num_unused;
+				} else
+					kfree(next_node);
 			} else {
 				next_node->size += cur->size;
 				next_node->start = cur->start;
@@ -215,14 +306,19 @@ void drm_mm_put_block(struct drm_mm_node * cur)
 		list_add(&cur->fl_entry, &mm->fl_entry);
 	} else {
 		list_del(&cur->ml_entry);
-		drm_free(cur, sizeof(*cur), DRM_MEM_MM);
+		if (mm->num_unused < MM_UNUSED_TARGET) {
+			list_add(&cur->fl_entry, &mm->unused_nodes);
+			++mm->num_unused;
+		} else
+			kfree(cur);
 	}
 }
+
 EXPORT_SYMBOL(drm_mm_put_block);
 
-struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm,
-				  unsigned long size,
-				  unsigned alignment, int best_match)
+struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
+				       unsigned long size,
+				       unsigned alignment, int best_match)
 {
 	struct list_head *list;
 	const struct list_head *free_stack = &mm->fl_entry;
@@ -247,7 +343,6 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm,
 				wasted += alignment - tmp;
 		}
 
-
 		if (entry->size >= size + wasted) {
 			if (!best_match)
 				return entry;
@@ -260,6 +355,7 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm,
 
 	return best;
 }
+EXPORT_SYMBOL(drm_mm_search_free);
 
 int drm_mm_clean(struct drm_mm * mm)
 {
@@ -267,14 +363,17 @@ int drm_mm_clean(struct drm_mm * mm)
 
 	return (head->next->next == head);
 }
-EXPORT_SYMBOL(drm_mm_search_free);
+EXPORT_SYMBOL(drm_mm_clean);
 
 int drm_mm_init(struct drm_mm * mm, unsigned long start, unsigned long size)
 {
 	INIT_LIST_HEAD(&mm->ml_entry);
 	INIT_LIST_HEAD(&mm->fl_entry);
+	INIT_LIST_HEAD(&mm->unused_nodes);
+	mm->num_unused = 0;
+	spin_lock_init(&mm->unused_lock);
 
-	return drm_mm_create_tail_node(mm, start, size);
+	return drm_mm_create_tail_node(mm, start, size, 0);
 }
 EXPORT_SYMBOL(drm_mm_init);
 
@@ -282,6 +381,7 @@ void drm_mm_takedown(struct drm_mm * mm)
 {
 	struct list_head *bnode = mm->fl_entry.next;
 	struct drm_mm_node *entry;
+	struct drm_mm_node *next;
 
 	entry = list_entry(bnode, struct drm_mm_node, fl_entry);
 
@@ -293,7 +393,16 @@ void drm_mm_takedown(struct drm_mm * mm)
 
 	list_del(&entry->fl_entry);
 	list_del(&entry->ml_entry);
+	kfree(entry);
+
+	spin_lock(&mm->unused_lock);
+	list_for_each_entry_safe(entry, next, &mm->unused_nodes, fl_entry) {
+		list_del(&entry->fl_entry);
+		kfree(entry);
+		--mm->num_unused;
+	}
+	spin_unlock(&mm->unused_lock);
 
-	drm_free(entry, sizeof(*entry), DRM_MEM_MM);
+	BUG_ON(mm->num_unused != 0);
 }
 EXPORT_SYMBOL(drm_mm_takedown);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c9b80fdd463..54f492a488a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -38,6 +38,7 @@
 #include "drm.h"
 #include "drm_crtc.h"
 
+#define DRM_MODESET_DEBUG	"drm_mode"
 /**
  * drm_mode_debug_printmodeline - debug print a mode
  * @dev: DRM device
@@ -50,12 +51,13 @@
  */
 void drm_mode_debug_printmodeline(struct drm_display_mode *mode)
 {
-	DRM_DEBUG("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
-		  mode->base.id, mode->name, mode->vrefresh, mode->clock,
-		  mode->hdisplay, mode->hsync_start,
-		  mode->hsync_end, mode->htotal,
-		  mode->vdisplay, mode->vsync_start,
-		  mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+	DRM_DEBUG_MODE(DRM_MODESET_DEBUG,
+		"Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+		mode->base.id, mode->name, mode->vrefresh, mode->clock,
+		mode->hdisplay, mode->hsync_start,
+		mode->hsync_end, mode->htotal,
+		mode->vdisplay, mode->vsync_start,
+		mode->vsync_end, mode->vtotal, mode->type, mode->flags);
 }
 EXPORT_SYMBOL(drm_mode_debug_printmodeline);
 
@@ -401,7 +403,9 @@ void drm_mode_prune_invalid(struct drm_device *dev,
 			list_del(&mode->head);
 			if (verbose) {
 				drm_mode_debug_printmodeline(mode);
-				DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status);
+				DRM_DEBUG_MODE(DRM_MODESET_DEBUG,
+					"Not using %s mode %d\n",
+					mode->name, mode->status);
 			}
 			drm_mode_destroy(dev, mode);
 		}
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index b9631e3a1ea..89050684fe0 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -51,7 +51,22 @@ struct idr drm_minors_idr;
 struct class *drm_class;
 struct proc_dir_entry *drm_proc_root;
 struct dentry *drm_debugfs_root;
-
+void drm_ut_debug_printk(unsigned int request_level,
+			 const char *prefix,
+			 const char *function_name,
+			 const char *format, ...)
+{
+	va_list args;
+
+	if (drm_debug & request_level) {
+		if (function_name)
+			printk(KERN_DEBUG "[%s:%s], ", prefix, function_name);
+		va_start(args, format);
+		vprintk(format, args);
+		va_end(args);
+	}
+}
+EXPORT_SYMBOL(drm_ut_debug_printk);
 static int drm_minor_get_id(struct drm_device *dev, int type)
 {
 	int new_id;
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 8f9372921f8..9987ab88083 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -147,7 +147,7 @@ static ssize_t status_show(struct device *device,
 	enum drm_connector_status status;
 
 	status = connector->funcs->detect(connector);
-	return snprintf(buf, PAGE_SIZE, "%s",
+	return snprintf(buf, PAGE_SIZE, "%s\n",
 			drm_get_connector_status_name(status));
 }
 
@@ -166,7 +166,7 @@ static ssize_t dpms_show(struct device *device,
 	if (ret)
 		return 0;
 
-	return snprintf(buf, PAGE_SIZE, "%s",
+	return snprintf(buf, PAGE_SIZE, "%s\n",
 			drm_get_dpms_name((int)dpms_status));
 }
 
@@ -176,7 +176,7 @@ static ssize_t enabled_show(struct device *device,
 {
 	struct drm_connector *connector = to_drm_connector(device);
 
-	return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" :
+	return snprintf(buf, PAGE_SIZE, "%s\n", connector->encoder ? "enabled" :
 			"disabled");
 }
 
@@ -317,6 +317,7 @@ static struct device_attribute connector_attrs_opt1[] = {
 
 static struct bin_attribute edid_attr = {
 	.attr.name = "edid",
+	.attr.mode = 0444,
 	.size = 128,
 	.read = edid_show,
 };
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 051134c56ae..1a60626f680 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -33,6 +33,8 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+#define I915_DRV	"i915_drv"
+
 /* Really want an OS-independent resettable timer.  Would like to have
  * this loop run for (eg) 3 sec, but have the timer reset every time
  * the head pointer changes, so that EBUSY only happens if the ring
@@ -99,7 +101,7 @@ static int i915_init_phys_hws(struct drm_device *dev)
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
 
 	I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
-	DRM_DEBUG("Enabled hardware status page\n");
+	DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n");
 	return 0;
 }
 
@@ -185,7 +187,8 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 		master_priv->sarea_priv = (drm_i915_sarea_t *)
 			((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
 	} else {
-		DRM_DEBUG("sarea not found assuming DRI2 userspace\n");
+		DRM_DEBUG_DRIVER(I915_DRV,
+				"sarea not found assuming DRI2 userspace\n");
 	}
 
 	if (init->ring_size != 0) {
@@ -235,7 +238,7 @@ static int i915_dma_resume(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
-	DRM_DEBUG("%s\n", __func__);
+	DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__);
 
 	if (dev_priv->ring.map.handle == NULL) {
 		DRM_ERROR("can not ioremap virtual address for"
@@ -248,13 +251,14 @@ static int i915_dma_resume(struct drm_device * dev)
 		DRM_ERROR("Can not find hardware status page\n");
 		return -EINVAL;
 	}
-	DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page);
+	DRM_DEBUG_DRIVER(I915_DRV, "hw status page @ %p\n",
+				dev_priv->hw_status_page);
 
 	if (dev_priv->status_gfx_addr != 0)
 		I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
 	else
 		I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
-	DRM_DEBUG("Enabled hardware status page\n");
+	DRM_DEBUG_DRIVER(I915_DRV, "Enabled hardware status page\n");
 
 	return 0;
 }
@@ -548,10 +552,10 @@ static int i915_dispatch_flip(struct drm_device * dev)
 	if (!master_priv->sarea_priv)
 		return -EINVAL;
 
-	DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n",
-		  __func__,
-		  dev_priv->current_page,
-		  master_priv->sarea_priv->pf_current_page);
+	DRM_DEBUG_DRIVER(I915_DRV, "%s: page=%d pfCurrentPage=%d\n",
+			  __func__,
+			 dev_priv->current_page,
+			 master_priv->sarea_priv->pf_current_page);
 
 	i915_kernel_lost_context(dev);
 
@@ -629,8 +633,9 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	DRM_DEBUG("i915 batchbuffer, start %x used %d cliprects %d\n",
-		  batch->start, batch->used, batch->num_cliprects);
+	DRM_DEBUG_DRIVER(I915_DRV,
+			"i915 batchbuffer, start %x used %d cliprects %d\n",
+			batch->start, batch->used, batch->num_cliprects);
 
 	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 
@@ -678,8 +683,9 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
 	void *batch_data;
 	int ret;
 
-	DRM_DEBUG("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
-		  cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
+	DRM_DEBUG_DRIVER(I915_DRV,
+			"i915 cmdbuffer, buf %p sz %d cliprects %d\n",
+			cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
 
 	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 
@@ -734,7 +740,7 @@ static int i915_flip_bufs(struct drm_device *dev, void *data,
 {
 	int ret;
 
-	DRM_DEBUG("%s\n", __func__);
+	DRM_DEBUG_DRIVER(I915_DRV, "%s\n", __func__);
 
 	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 
@@ -777,7 +783,8 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
 		break;
 	default:
-		DRM_DEBUG("Unknown parameter %d\n", param->param);
+		DRM_DEBUG_DRIVER(I915_DRV, "Unknown parameter %d\n",
+					param->param);
 		return -EINVAL;
 	}
 
@@ -817,7 +824,8 @@ static int i915_setparam(struct drm_device *dev, void *data,
 		dev_priv->fence_reg_start = param->value;
 		break;
 	default:
-		DRM_DEBUG("unknown parameter %d\n", param->param);
+		DRM_DEBUG_DRIVER(I915_DRV, "unknown parameter %d\n",
+					param->param);
 		return -EINVAL;
 	}
 
@@ -865,9 +873,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
 	I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
-	DRM_DEBUG("load hws HWS_PGA with gfx mem 0x%x\n",
-			dev_priv->status_gfx_addr);
-	DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page);
+	DRM_DEBUG_DRIVER(I915_DRV, "load hws HWS_PGA with gfx mem 0x%x\n",
+				dev_priv->status_gfx_addr);
+	DRM_DEBUG_DRIVER(I915_DRV, "load hws at %p\n",
+				dev_priv->hw_status_page);
 	return 0;
 }
 
@@ -922,7 +931,7 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
 	 * Some of the preallocated space is taken by the GTT
 	 * and popup.  GTT is 1K per MB of aperture size, and popup is 4K.
 	 */
-	if (IS_G4X(dev) || IS_IGD(dev))
+	if (IS_G4X(dev) || IS_IGD(dev) || IS_IGDNG(dev))
 		overhead = 4096;
 	else
 		overhead = (*aperture_size / 1024) + 4096;
@@ -987,12 +996,6 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	int fb_bar = IS_I9XX(dev) ? 2 : 0;
 	int ret = 0;
 
-	dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL);
-	if (!dev->devname) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
 	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
 		0xff000000;
 
@@ -1006,17 +1009,25 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
 	if (ret)
-		goto kfree_devname;
+		goto out;
 
 	/* Basic memrange allocator for stolen space (aka vram) */
 	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
 
-	/* Let GEM Manage from end of prealloc space to end of aperture */
-	i915_gem_do_init(dev, prealloc_size, agp_size);
+	/* Let GEM Manage from end of prealloc space to end of aperture.
+	 *
+	 * However, leave one page at the end still bound to the scratch page.
+	 * There are a number of places where the hardware apparently
+	 * prefetches past the end of the object, and we've seen multiple
+	 * hangs with the GPU head pointer stuck in a batchbuffer bound
+	 * at the last page of the aperture.  One page should be enough to
+	 * keep any prefetching inside of the aperture.
+	 */
+	i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
 
 	ret = i915_gem_init_ringbuffer(dev);
 	if (ret)
-		goto kfree_devname;
+		goto out;
 
 	/* Allow hardware batchbuffers unless told otherwise.
 	 */
@@ -1048,8 +1059,6 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 destroy_ringbuffer:
 	i915_gem_cleanup_ringbuffer(dev);
-kfree_devname:
-	kfree(dev->devname);
 out:
 	return ret;
 }
@@ -1153,8 +1162,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 #endif
 
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
-	if (IS_GM45(dev))
+	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_G4X(dev) || IS_IGDNG(dev)) {
+		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
 		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+	}
 
 	i915_gem_load(dev);
 
@@ -1198,7 +1210,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	}
 
 	/* Must be done after probing outputs */
-	intel_opregion_init(dev, 0);
+	/* FIXME: verify on IGDNG */
+	if (!IS_IGDNG(dev))
+		intel_opregion_init(dev, 0);
 
 	return 0;
 
@@ -1232,7 +1246,8 @@ int i915_driver_unload(struct drm_device *dev)
 	if (dev_priv->regs != NULL)
 		iounmap(dev_priv->regs);
 
-	intel_opregion_free(dev, 0);
+	if (!IS_IGDNG(dev))
+		intel_opregion_free(dev, 0);
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		intel_modeset_cleanup(dev);
@@ -1256,7 +1271,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_i915_file_private *i915_file_priv;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_DRIVER(I915_DRV, "\n");
 	i915_file_priv = (struct drm_i915_file_private *)
 	    drm_alloc(sizeof(*i915_file_priv), DRM_MEM_FILES);
 
@@ -1265,8 +1280,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 
 	file_priv->driver_priv = i915_file_priv;
 
-	i915_file_priv->mm.last_gem_seqno = 0;
-	i915_file_priv->mm.last_gem_throttle_seqno = 0;
+	INIT_LIST_HEAD(&i915_file_priv->mm.request_list);
 
 	return 0;
 }
@@ -1303,6 +1317,7 @@ void i915_driver_lastclose(struct drm_device * dev)
 void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	i915_gem_release(dev, file_priv);
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		i915_mem_release(dev, file_priv, dev_priv->agp_heap);
 }
@@ -1350,6 +1365,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
 	DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
 	DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
 	DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
+	DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
 };
 
 int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 25065923b8a..8ef6bcec211 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -126,6 +126,13 @@ struct drm_i915_fence_reg {
 	struct drm_gem_object *obj;
 };
 
+struct sdvo_device_mapping {
+	u8 dvo_port;
+	u8 slave_addr;
+	u8 dvo_wiring;
+	u8 initialized;
+};
+
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
@@ -143,6 +150,8 @@ typedef struct drm_i915_private {
 	drm_local_map_t hws_map;
 	struct drm_gem_object *hws_obj;
 
+	struct resource mch_res;
+
 	unsigned int cpp;
 	int back_offset;
 	int front_offset;
@@ -158,6 +167,11 @@ typedef struct drm_i915_private {
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 irq_mask_reg;
 	u32 pipestat[2];
+	/** splitted irq regs for graphics and display engine on IGDNG,
+	    irq_mask_reg is still used for display irq. */
+	u32 gt_irq_mask_reg;
+	u32 gt_irq_enable_reg;
+	u32 de_irq_enable_reg;
 
 	u32 hotplug_supported_mask;
 	struct work_struct hotplug_work;
@@ -180,7 +194,8 @@ typedef struct drm_i915_private {
 	int backlight_duty_cycle;  /* restore backlight to this value */
 	bool panel_wants_dither;
 	struct drm_display_mode *panel_fixed_mode;
-	struct drm_display_mode *vbt_mode; /* if any */
+	struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
+	struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
 
 	/* Feature bits from the VBIOS */
 	unsigned int int_tv_support:1;
@@ -283,6 +298,14 @@ typedef struct drm_i915_private {
 	u8 saveAR[21];
 	u8 saveDACMASK;
 	u8 saveCR[37];
+	uint64_t saveFENCE[16];
+	u32 saveCURACNTR;
+	u32 saveCURAPOS;
+	u32 saveCURABASE;
+	u32 saveCURBCNTR;
+	u32 saveCURBPOS;
+	u32 saveCURBBASE;
+	u32 saveCURSIZE;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -380,6 +403,7 @@ typedef struct drm_i915_private {
 		/* storage for physical objects */
 		struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
 	} mm;
+	struct sdvo_device_mapping sdvo_mappings[2];
 } drm_i915_private_t;
 
 /** driver private structure attached to each drm_gem_object */
@@ -489,13 +513,16 @@ struct drm_i915_gem_request {
 	/** Time at which this request was emitted, in jiffies. */
 	unsigned long emitted_jiffies;
 
+	/** global list entry for this request */
 	struct list_head list;
+
+	/** file_priv list entry for this request */
+	struct list_head client_list;
 };
 
 struct drm_i915_file_private {
 	struct {
-		uint32_t last_gem_seqno;
-		uint32_t last_gem_throttle_seqno;
+		struct list_head request_list;
 	} mm;
 };
 
@@ -640,6 +667,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev,
 void i915_gem_free_all_phys_object(struct drm_device *dev);
 int i915_gem_object_get_pages(struct drm_gem_object *obj);
 void i915_gem_object_put_pages(struct drm_gem_object *obj);
+void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
@@ -705,13 +733,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev);
 #define I915_WRITE16(reg, val)	writel(val, dev_priv->regs + (reg))
 #define I915_READ8(reg)		readb(dev_priv->regs + (reg))
 #define I915_WRITE8(reg, val)	writeb(val, dev_priv->regs + (reg))
-#ifdef writeq
 #define I915_WRITE64(reg, val)	writeq(val, dev_priv->regs + (reg))
-#else
-#define I915_WRITE64(reg, val)	(writel(val, dev_priv->regs + (reg)), \
-				 writel(upper_32_bits(val), dev_priv->regs + \
-					(reg) + 4))
-#endif
+#define I915_READ64(reg)	readq(dev_priv->regs + (reg))
 #define POSTING_READ(reg)	(void)I915_READ(reg)
 
 #define I915_VERBOSE 0
@@ -788,9 +811,12 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x2E02 || \
 		       (dev)->pci_device == 0x2E12 || \
 		       (dev)->pci_device == 0x2E22 || \
-		       (dev)->pci_device == 0x2E32)
+		       (dev)->pci_device == 0x2E32 || \
+		       (dev)->pci_device == 0x0042 || \
+		       (dev)->pci_device == 0x0046)
 
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
+			(dev)->pci_device == 0x2A12)
 
 #define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
 
@@ -809,20 +835,26 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 			(dev)->pci_device == 0x29D2 ||  \
 			(IS_IGD(dev)))
 
+#define IS_IGDNG_D(dev)	((dev)->pci_device == 0x0042)
+#define IS_IGDNG_M(dev)	((dev)->pci_device == 0x0046)
+#define IS_IGDNG(dev)	(IS_IGDNG_D(dev) || IS_IGDNG_M(dev))
+
 #define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
-		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev))
+		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
+		      IS_IGDNG(dev))
 
 #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
 			IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
-			IS_IGD(dev))
+			IS_IGD(dev) || IS_IGDNG_M(dev))
 
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
+				IS_IGDNG(dev))
 /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
  * rows, which changed the alignment requirements and fence programming.
  */
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
-#define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev))
+#define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ee896d91c5b..c0ae6bbbd9b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -349,7 +349,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj,
 	last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
 	num_pages = last_data_page - first_data_page + 1;
 
-	user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+	user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
 	if (user_pages == NULL)
 		return -ENOMEM;
 
@@ -429,7 +429,7 @@ fail_put_user_pages:
 		SetPageDirty(user_pages[i]);
 		page_cache_release(user_pages[i]);
 	}
-	kfree(user_pages);
+	drm_free_large(user_pages);
 
 	return ret;
 }
@@ -649,7 +649,7 @@ i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 	last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
 	num_pages = last_data_page - first_data_page + 1;
 
-	user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+	user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
 	if (user_pages == NULL)
 		return -ENOMEM;
 
@@ -719,7 +719,7 @@ out_unlock:
 out_unpin_pages:
 	for (i = 0; i < pinned_pages; i++)
 		page_cache_release(user_pages[i]);
-	kfree(user_pages);
+	drm_free_large(user_pages);
 
 	return ret;
 }
@@ -824,7 +824,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 	last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
 	num_pages = last_data_page - first_data_page + 1;
 
-	user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+	user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
 	if (user_pages == NULL)
 		return -ENOMEM;
 
@@ -902,7 +902,7 @@ fail_unlock:
 fail_put_user_pages:
 	for (i = 0; i < pinned_pages; i++)
 		page_cache_release(user_pages[i]);
-	kfree(user_pages);
+	drm_free_large(user_pages);
 
 	return ret;
 }
@@ -989,10 +989,10 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 		return -ENODEV;
 
 	/* Only handle setting domains to types used by the CPU. */
-	if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+	if (write_domain & I915_GEM_GPU_DOMAINS)
 		return -EINVAL;
 
-	if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+	if (read_domains & I915_GEM_GPU_DOMAINS)
 		return -EINVAL;
 
 	/* Having something in the write domain implies it's in the read
@@ -1145,7 +1145,14 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 			mutex_unlock(&dev->struct_mutex);
 			return VM_FAULT_SIGBUS;
 		}
-		list_add(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+		ret = i915_gem_object_set_to_gtt_domain(obj, write);
+		if (ret) {
+			mutex_unlock(&dev->struct_mutex);
+			return VM_FAULT_SIGBUS;
+		}
+
+		list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
 	}
 
 	/* Need a new fence register? */
@@ -1375,7 +1382,7 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
 			mutex_unlock(&dev->struct_mutex);
 			return ret;
 		}
-		list_add(&obj_priv->list, &dev_priv->mm.inactive_list);
+		list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
 	}
 
 	drm_gem_object_unreference(obj);
@@ -1408,9 +1415,7 @@ i915_gem_object_put_pages(struct drm_gem_object *obj)
 		}
 	obj_priv->dirty = 0;
 
-	drm_free(obj_priv->pages,
-		 page_count * sizeof(struct page *),
-		 DRM_MEM_DRIVER);
+	drm_free_large(obj_priv->pages);
 	obj_priv->pages = NULL;
 }
 
@@ -1476,14 +1481,19 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
  * Returned sequence numbers are nonzero on success.
  */
 static uint32_t
-i915_add_request(struct drm_device *dev, uint32_t flush_domains)
+i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
+		 uint32_t flush_domains)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_file_private *i915_file_priv = NULL;
 	struct drm_i915_gem_request *request;
 	uint32_t seqno;
 	int was_empty;
 	RING_LOCALS;
 
+	if (file_priv != NULL)
+		i915_file_priv = file_priv->driver_priv;
+
 	request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER);
 	if (request == NULL)
 		return 0;
@@ -1510,6 +1520,12 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains)
 	request->emitted_jiffies = jiffies;
 	was_empty = list_empty(&dev_priv->mm.request_list);
 	list_add_tail(&request->list, &dev_priv->mm.request_list);
+	if (i915_file_priv) {
+		list_add_tail(&request->client_list,
+			      &i915_file_priv->mm.request_list);
+	} else {
+		INIT_LIST_HEAD(&request->client_list);
+	}
 
 	/* Associate any objects on the flushing list matching the write
 	 * domain we're flushing with our flush.
@@ -1659,6 +1675,7 @@ i915_gem_retire_requests(struct drm_device *dev)
 			i915_gem_retire_request(dev, request);
 
 			list_del(&request->list);
+			list_del(&request->client_list);
 			drm_free(request, sizeof(*request), DRM_MEM_DRIVER);
 		} else
 			break;
@@ -1691,11 +1708,23 @@ static int
 i915_wait_request(struct drm_device *dev, uint32_t seqno)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 ier;
 	int ret = 0;
 
 	BUG_ON(seqno == 0);
 
 	if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+		if (IS_IGDNG(dev))
+			ier = I915_READ(DEIER) | I915_READ(GTIER);
+		else
+			ier = I915_READ(IER);
+		if (!ier) {
+			DRM_ERROR("something (likely vbetool) disabled "
+				  "interrupts, re-enabling\n");
+			i915_driver_irq_preinstall(dev);
+			i915_driver_irq_postinstall(dev);
+		}
+
 		dev_priv->mm.waiting_gem_seqno = seqno;
 		i915_user_irq_get(dev);
 		ret = wait_event_interruptible(dev_priv->irq_queue,
@@ -1740,8 +1769,7 @@ i915_gem_flush(struct drm_device *dev,
 	if (flush_domains & I915_GEM_DOMAIN_CPU)
 		drm_agp_chipset_flush(dev);
 
-	if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU |
-						     I915_GEM_DOMAIN_GTT)) {
+	if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) {
 		/*
 		 * read/write caches:
 		 *
@@ -1963,7 +1991,7 @@ i915_gem_evict_something(struct drm_device *dev)
 			i915_gem_flush(dev,
 				       obj->write_domain,
 				       obj->write_domain);
-			i915_add_request(dev, obj->write_domain);
+			i915_add_request(dev, NULL, obj->write_domain);
 
 			obj = NULL;
 			continue;
@@ -1977,7 +2005,7 @@ i915_gem_evict_something(struct drm_device *dev)
 		/* If we didn't do any of the above, there's nothing to be done
 		 * and we just can't fit it in.
 		 */
-		return -ENOMEM;
+		return -ENOSPC;
 	}
 	return ret;
 }
@@ -1992,7 +2020,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 		if (ret != 0)
 			break;
 	}
-	if (ret == -ENOMEM)
+	if (ret == -ENOSPC)
 		return 0;
 	return ret;
 }
@@ -2015,8 +2043,7 @@ i915_gem_object_get_pages(struct drm_gem_object *obj)
 	 */
 	page_count = obj->size / PAGE_SIZE;
 	BUG_ON(obj_priv->pages != NULL);
-	obj_priv->pages = drm_calloc(page_count, sizeof(struct page *),
-				     DRM_MEM_DRIVER);
+	obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *));
 	if (obj_priv->pages == NULL) {
 		DRM_ERROR("Faled to allocate page list\n");
 		obj_priv->pages_refcount--;
@@ -2122,8 +2149,10 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
 		return;
 	}
 
-	pitch_val = (obj_priv->stride / 128) - 1;
-	WARN_ON(pitch_val & ~0x0000000f);
+	pitch_val = obj_priv->stride / 128;
+	pitch_val = ffs(pitch_val) - 1;
+	WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+
 	val = obj_priv->gtt_offset;
 	if (obj_priv->tiling_mode == I915_TILING_Y)
 		val |= 1 << I830_FENCE_TILING_Y_SHIFT;
@@ -2200,7 +2229,7 @@ try_again:
 		loff_t offset;
 
 		if (avail == 0)
-			return -ENOMEM;
+			return -ENOSPC;
 
 		for (i = dev_priv->fence_reg_start;
 		     i < dev_priv->num_fence_regs; i++) {
@@ -2233,7 +2262,7 @@ try_again:
 				i915_gem_flush(dev,
 					       I915_GEM_GPU_DOMAINS,
 					       I915_GEM_GPU_DOMAINS);
-				seqno = i915_add_request(dev,
+				seqno = i915_add_request(dev, NULL,
 							 I915_GEM_GPU_DOMAINS);
 				if (seqno == 0)
 					return -ENOMEM;
@@ -2245,9 +2274,6 @@ try_again:
 			goto try_again;
 		}
 
-		BUG_ON(old_obj_priv->active ||
-		       (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
-
 		/*
 		 * Zap this virtual mapping so we can set up a fence again
 		 * for this object next time we need it.
@@ -2352,7 +2378,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 		spin_unlock(&dev_priv->mm.active_list_lock);
 		if (lists_empty) {
 			DRM_ERROR("GTT full, but LRU list empty\n");
-			return -ENOMEM;
+			return -ENOSPC;
 		}
 
 		ret = i915_gem_evict_something(dev);
@@ -2397,8 +2423,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 	 * wasn't in the GTT, there shouldn't be any way it could have been in
 	 * a GPU cache
 	 */
-	BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
-	BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
+	BUG_ON(obj->read_domains & I915_GEM_GPU_DOMAINS);
+	BUG_ON(obj->write_domain & I915_GEM_GPU_DOMAINS);
 
 	return 0;
 }
@@ -2415,6 +2441,16 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
 	if (obj_priv->pages == NULL)
 		return;
 
+	/* XXX: The 865 in particular appears to be weird in how it handles
+	 * cache flushing.  We haven't figured it out, but the
+	 * clflush+agp_chipset_flush doesn't appear to successfully get the
+	 * data visible to the PGU, while wbinvd + agp_chipset_flush does.
+	 */
+	if (IS_I865G(obj->dev)) {
+		wbinvd();
+		return;
+	}
+
 	drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
 }
 
@@ -2430,7 +2466,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 
 	/* Queue the GPU write cache flushing we need. */
 	i915_gem_flush(dev, 0, obj->write_domain);
-	seqno = i915_add_request(dev, obj->write_domain);
+	seqno = i915_add_request(dev, NULL, obj->write_domain);
 	obj->write_domain = 0;
 	i915_gem_object_move_to_active(obj, seqno);
 }
@@ -3013,20 +3049,12 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev,
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	int nbox = exec->num_cliprects;
 	int i = 0, count;
-	uint32_t	exec_start, exec_len;
+	uint32_t exec_start, exec_len;
 	RING_LOCALS;
 
 	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
 	exec_len = (uint32_t) exec->batch_len;
 
-	if ((exec_start | exec_len) & 0x7) {
-		DRM_ERROR("alignment\n");
-		return -EINVAL;
-	}
-
-	if (!exec_start)
-		return -EINVAL;
-
 	count = nbox ? nbox : 1;
 
 	for (i = 0; i < count; i++) {
@@ -3067,6 +3095,10 @@ i915_dispatch_gem_execbuffer(struct drm_device *dev,
 /* Throttle our rendering by waiting until the ring has completed our requests
  * emitted over 20 msec ago.
  *
+ * Note that if we were to use the current jiffies each time around the loop,
+ * we wouldn't escape the function with any frames outstanding if the time to
+ * render a frame was over 20ms.
+ *
  * This should get us reasonable parallelism between CPU and GPU but also
  * relatively low latency when blocking on a particular request to finish.
  */
@@ -3075,15 +3107,25 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
 	int ret = 0;
-	uint32_t seqno;
+	unsigned long recent_enough = jiffies - msecs_to_jiffies(20);
 
 	mutex_lock(&dev->struct_mutex);
-	seqno = i915_file_priv->mm.last_gem_throttle_seqno;
-	i915_file_priv->mm.last_gem_throttle_seqno =
-		i915_file_priv->mm.last_gem_seqno;
-	if (seqno)
-		ret = i915_wait_request(dev, seqno);
+	while (!list_empty(&i915_file_priv->mm.request_list)) {
+		struct drm_i915_gem_request *request;
+
+		request = list_first_entry(&i915_file_priv->mm.request_list,
+					   struct drm_i915_gem_request,
+					   client_list);
+
+		if (time_after_eq(request->emitted_jiffies, recent_enough))
+			break;
+
+		ret = i915_wait_request(dev, request->seqno);
+		if (ret != 0)
+			break;
+	}
 	mutex_unlock(&dev->struct_mutex);
+
 	return ret;
 }
 
@@ -3102,7 +3144,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
 		reloc_count += exec_list[i].relocation_count;
 	}
 
-	*relocs = drm_calloc(reloc_count, sizeof(**relocs), DRM_MEM_DRIVER);
+	*relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
 	if (*relocs == NULL)
 		return -ENOMEM;
 
@@ -3116,8 +3158,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
 				     exec_list[i].relocation_count *
 				     sizeof(**relocs));
 		if (ret != 0) {
-			drm_free(*relocs, reloc_count * sizeof(**relocs),
-				 DRM_MEM_DRIVER);
+			drm_free_large(*relocs);
 			*relocs = NULL;
 			return -EFAULT;
 		}
@@ -3156,17 +3197,34 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
 	}
 
 err:
-	drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER);
+	drm_free_large(relocs);
 
 	return ret;
 }
 
+static int
+i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec,
+			   uint64_t exec_offset)
+{
+	uint32_t exec_start, exec_len;
+
+	exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+	exec_len = (uint32_t) exec->batch_len;
+
+	if ((exec_start | exec_len) & 0x7)
+		return -EINVAL;
+
+	if (!exec_start)
+		return -EINVAL;
+
+	return 0;
+}
+
 int
 i915_gem_execbuffer(struct drm_device *dev, void *data,
 		    struct drm_file *file_priv)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
 	struct drm_i915_gem_execbuffer *args = data;
 	struct drm_i915_gem_exec_object *exec_list = NULL;
 	struct drm_gem_object **object_list = NULL;
@@ -3189,10 +3247,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 	/* Copy in the exec list from userland */
-	exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count,
-			       DRM_MEM_DRIVER);
-	object_list = drm_calloc(sizeof(*object_list), args->buffer_count,
-				 DRM_MEM_DRIVER);
+	exec_list = drm_calloc_large(sizeof(*exec_list), args->buffer_count);
+	object_list = drm_calloc_large(sizeof(*object_list), args->buffer_count);
 	if (exec_list == NULL || object_list == NULL) {
 		DRM_ERROR("Failed to allocate exec or object list "
 			  "for %d buffers\n",
@@ -3293,7 +3349,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			break;
 
 		/* error other than GTT full, or we've already tried again */
-		if (ret != -ENOMEM || pin_tries >= 1) {
+		if (ret != -ENOSPC || pin_tries >= 1) {
 			if (ret != -ERESTARTSYS)
 				DRM_ERROR("Failed to pin buffers %d\n", ret);
 			goto err;
@@ -3312,8 +3368,20 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 
 	/* Set the pending read domains for the batch buffer to COMMAND */
 	batch_obj = object_list[args->buffer_count-1];
-	batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND;
-	batch_obj->pending_write_domain = 0;
+	if (batch_obj->pending_write_domain) {
+		DRM_ERROR("Attempting to use self-modifying batch buffer\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	batch_obj->pending_read_domains |= I915_GEM_DOMAIN_COMMAND;
+
+	/* Sanity check the batch buffer, prior to moving objects */
+	exec_offset = exec_list[args->buffer_count - 1].offset;
+	ret = i915_gem_check_execbuffer (args, exec_offset);
+	if (ret != 0) {
+		DRM_ERROR("execbuf with invalid offset/length\n");
+		goto err;
+	}
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
@@ -3344,7 +3412,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			       dev->invalidate_domains,
 			       dev->flush_domains);
 		if (dev->flush_domains)
-			(void)i915_add_request(dev, dev->flush_domains);
+			(void)i915_add_request(dev, file_priv,
+					       dev->flush_domains);
 	}
 
 	for (i = 0; i < args->buffer_count; i++) {
@@ -3362,8 +3431,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	}
 #endif
 
-	exec_offset = exec_list[args->buffer_count - 1].offset;
-
 #if WATCH_EXEC
 	i915_gem_dump_object(batch_obj,
 			      args->batch_len,
@@ -3393,9 +3460,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	 * *some* interrupts representing completion of buffers that we can
 	 * wait on when trying to clear up gtt space).
 	 */
-	seqno = i915_add_request(dev, flush_domains);
+	seqno = i915_add_request(dev, file_priv, flush_domains);
 	BUG_ON(seqno == 0);
-	i915_file_priv->mm.last_gem_seqno = seqno;
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
 
@@ -3453,10 +3519,8 @@ err:
 	}
 
 pre_mutex_err:
-	drm_free(object_list, sizeof(*object_list) * args->buffer_count,
-		 DRM_MEM_DRIVER);
-	drm_free(exec_list, sizeof(*exec_list) * args->buffer_count,
-		 DRM_MEM_DRIVER);
+	drm_free_large(object_list);
+	drm_free_large(exec_list);
 	drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects,
 		 DRM_MEM_DRIVER);
 
@@ -3503,8 +3567,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 		atomic_inc(&dev->pin_count);
 		atomic_add(obj->size, &dev->pin_memory);
 		if (!obj_priv->active &&
-		    (obj->write_domain & ~(I915_GEM_DOMAIN_CPU |
-					   I915_GEM_DOMAIN_GTT)) == 0 &&
+		    (obj->write_domain & I915_GEM_GPU_DOMAINS) == 0 &&
 		    !list_empty(&obj_priv->list))
 			list_del_init(&obj_priv->list);
 	}
@@ -3531,8 +3594,7 @@ i915_gem_object_unpin(struct drm_gem_object *obj)
 	 */
 	if (obj_priv->pin_count == 0) {
 		if (!obj_priv->active &&
-		    (obj->write_domain & ~(I915_GEM_DOMAIN_CPU |
-					   I915_GEM_DOMAIN_GTT)) == 0)
+		    (obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
 			list_move_tail(&obj_priv->list,
 				       &dev_priv->mm.inactive_list);
 		atomic_dec(&dev->pin_count);
@@ -3636,15 +3698,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
 
-	mutex_lock(&dev->struct_mutex);
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL) {
 		DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n",
 			  args->handle);
-		mutex_unlock(&dev->struct_mutex);
 		return -EBADF;
 	}
 
+	mutex_lock(&dev->struct_mutex);
 	/* Update the active list for the hardware's current position.
 	 * Otherwise this only updates on a delayed timer or when irqs are
 	 * actually unmasked, and our working set ends up being larger than
@@ -3783,9 +3844,8 @@ i915_gem_idle(struct drm_device *dev)
 
 	/* Flush the GPU along with all non-CPU write domains
 	 */
-	i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT),
-		       ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT));
-	seqno = i915_add_request(dev, ~I915_GEM_DOMAIN_CPU);
+	i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+	seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS);
 
 	if (seqno == 0) {
 		mutex_unlock(&dev->struct_mutex);
@@ -4335,3 +4395,17 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 	drm_agp_chipset_flush(dev);
 	return 0;
 }
+
+void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv)
+{
+	struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
+
+	/* Clean up our request list when the client is going away, so that
+	 * later retire_requests won't dereference our soon-to-be-gone
+	 * file_priv.
+	 */
+	mutex_lock(&dev->struct_mutex);
+	while (!list_empty(&i915_file_priv->mm.request_list))
+		list_del_init(i915_file_priv->mm.request_list.next);
+	mutex_unlock(&dev->struct_mutex);
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 52a059354e8..9a05cadaa4a 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -25,6 +25,8 @@
  *
  */
 
+#include <linux/acpi.h>
+#include <linux/pnp.h>
 #include "linux/string.h"
 #include "linux/bitops.h"
 #include "drmP.h"
@@ -81,6 +83,143 @@
  * to match what the GPU expects.
  */
 
+#define MCHBAR_I915 0x44
+#define MCHBAR_I965 0x48
+#define MCHBAR_SIZE (4*4096)
+
+#define DEVEN_REG 0x54
+#define   DEVEN_MCHBAR_EN (1 << 28)
+
+/* Allocate space for the MCH regs if needed, return nonzero on error */
+static int
+intel_alloc_mchbar_resource(struct drm_device *dev)
+{
+	struct pci_dev *bridge_dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp_lo, temp_hi = 0;
+	u64 mchbar_addr;
+	int ret = 0;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_DEBUG("no bridge dev?!\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (IS_I965G(dev))
+		pci_read_config_dword(bridge_dev, reg + 4, &temp_hi);
+	pci_read_config_dword(bridge_dev, reg, &temp_lo);
+	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
+
+	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+	if (mchbar_addr &&
+	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
+		ret = 0;
+		goto out_put;
+	}
+
+	/* Get some space for it */
+	ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
+				     MCHBAR_SIZE, MCHBAR_SIZE,
+				     PCIBIOS_MIN_MEM,
+				     0,   pcibios_align_resource,
+				     bridge_dev);
+	if (ret) {
+		DRM_DEBUG("failed bus alloc: %d\n", ret);
+		dev_priv->mch_res.start = 0;
+		goto out_put;
+	}
+
+	if (IS_I965G(dev))
+		pci_write_config_dword(bridge_dev, reg + 4,
+				       upper_32_bits(dev_priv->mch_res.start));
+
+	pci_write_config_dword(bridge_dev, reg,
+			       lower_32_bits(dev_priv->mch_res.start));
+out_put:
+	pci_dev_put(bridge_dev);
+out:
+	return ret;
+}
+
+/* Setup MCHBAR if possible, return true if we should disable it again */
+static bool
+intel_setup_mchbar(struct drm_device *dev)
+{
+	struct pci_dev *bridge_dev;
+	int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+	bool need_disable = false, enabled;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_DEBUG("no bridge dev?!\n");
+		goto out;
+	}
+
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_read_config_dword(bridge_dev, DEVEN_REG, &temp);
+		enabled = !!(temp & DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(bridge_dev, mchbar_reg, &temp);
+		enabled = temp & 1;
+	}
+
+	/* If it's already enabled, don't have to do anything */
+	if (enabled)
+		goto out_put;
+
+	if (intel_alloc_mchbar_resource(dev))
+		goto out_put;
+
+	need_disable = true;
+
+	/* Space is allocated or reserved, so enable it. */
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_write_config_dword(bridge_dev, DEVEN_REG,
+				       temp | DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(bridge_dev, mchbar_reg, &temp);
+		pci_write_config_dword(bridge_dev, mchbar_reg, temp | 1);
+	}
+out_put:
+	pci_dev_put(bridge_dev);
+out:
+	return need_disable;
+}
+
+static void
+intel_teardown_mchbar(struct drm_device *dev, bool disable)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct pci_dev *bridge_dev;
+	int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_DEBUG("no bridge dev?!\n");
+		return;
+	}
+
+	if (disable) {
+		if (IS_I915G(dev) || IS_I915GM(dev)) {
+			pci_read_config_dword(bridge_dev, DEVEN_REG, &temp);
+			temp &= ~DEVEN_MCHBAR_EN;
+			pci_write_config_dword(bridge_dev, DEVEN_REG, temp);
+		} else {
+			pci_read_config_dword(bridge_dev, mchbar_reg, &temp);
+			temp &= ~1;
+			pci_write_config_dword(bridge_dev, mchbar_reg, temp);
+		}
+	}
+
+	if (dev_priv->mch_res.start)
+		release_resource(&dev_priv->mch_res);
+}
+
 /**
  * Detects bit 6 swizzling of address lookup between IGD access and CPU
  * access through main memory.
@@ -91,6 +230,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
 	uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+	bool need_disable;
 
 	if (!IS_I9XX(dev)) {
 		/* As far as we know, the 865 doesn't have these bit 6
@@ -101,6 +241,9 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 	} else if (IS_MOBILE(dev)) {
 		uint32_t dcc;
 
+		/* Try to make sure MCHBAR is enabled before poking at it */
+		need_disable = intel_setup_mchbar(dev);
+
 		/* On mobile 9xx chipsets, channel interleave by the CPU is
 		 * determined by DCC.  For single-channel, neither the CPU
 		 * nor the GPU do swizzling.  For dual channel interleaved,
@@ -140,6 +283,8 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
 			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
 		}
+
+		intel_teardown_mchbar(dev, need_disable);
 	} else {
 		/* The 965, G33, and newer, have a very flexible memory
 		 * configuration.  It will enable dual-channel mode
@@ -170,6 +315,13 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 		}
 	}
 
+	/* FIXME: check with memory config on IGDNG */
+	if (IS_IGDNG(dev)) {
+		DRM_ERROR("disable tiling on IGDNG...\n");
+		swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+		swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+	}
+
 	dev_priv->mm.bit_6_swizzle_x = swizzle_x;
 	dev_priv->mm.bit_6_swizzle_y = swizzle_y;
 }
@@ -213,7 +365,8 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 	if (tiling_mode == I915_TILING_NONE)
 		return true;
 
-	if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+	if (!IS_I9XX(dev) ||
+	    (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
 		tile_width = 128;
 	else
 		tile_width = 512;
@@ -225,11 +378,18 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 		if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
 			return false;
 	} else if (IS_I9XX(dev)) {
-		if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL ||
+		uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+		/* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
+		 * instead of 4 (2KB) on 945s.
+		 */
+		if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
 		    size > (I830_FENCE_MAX_SIZE_VAL << 20))
 			return false;
 	} else {
-		if (stride / 128 > I830_FENCE_MAX_PITCH_VAL ||
+		uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+		if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
 		    size > (I830_FENCE_MAX_SIZE_VAL << 19))
 			return false;
 	}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 98bb4c878c4..b86b7b7130c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -58,6 +58,47 @@
 					 DRM_I915_VBLANK_PIPE_B)
 
 void
+igdng_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->gt_irq_mask_reg & mask) != 0) {
+		dev_priv->gt_irq_mask_reg &= ~mask;
+		I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
+		(void) I915_READ(GTIMR);
+	}
+}
+
+static inline void
+igdng_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->gt_irq_mask_reg & mask) != mask) {
+		dev_priv->gt_irq_mask_reg |= mask;
+		I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
+		(void) I915_READ(GTIMR);
+	}
+}
+
+/* For display hotplug interrupt */
+void
+igdng_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->irq_mask_reg & mask) != 0) {
+		dev_priv->irq_mask_reg &= ~mask;
+		I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
+		(void) I915_READ(DEIMR);
+	}
+}
+
+static inline void
+igdng_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->irq_mask_reg & mask) != mask) {
+		dev_priv->irq_mask_reg |= mask;
+		I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
+		(void) I915_READ(DEIMR);
+	}
+}
+
+void
 i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
 {
 	if ((dev_priv->irq_mask_reg & mask) != 0) {
@@ -196,6 +237,47 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	drm_sysfs_hotplug_event(dev);
 }
 
+irqreturn_t igdng_irq_handler(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int ret = IRQ_NONE;
+	u32 de_iir, gt_iir;
+	u32 new_de_iir, new_gt_iir;
+	struct drm_i915_master_private *master_priv;
+
+	de_iir = I915_READ(DEIIR);
+	gt_iir = I915_READ(GTIIR);
+
+	for (;;) {
+		if (de_iir == 0 && gt_iir == 0)
+			break;
+
+		ret = IRQ_HANDLED;
+
+		I915_WRITE(DEIIR, de_iir);
+		new_de_iir = I915_READ(DEIIR);
+		I915_WRITE(GTIIR, gt_iir);
+		new_gt_iir = I915_READ(GTIIR);
+
+		if (dev->primary->master) {
+			master_priv = dev->primary->master->driver_priv;
+			if (master_priv->sarea_priv)
+				master_priv->sarea_priv->last_dispatch =
+					READ_BREADCRUMB(dev_priv);
+		}
+
+		if (gt_iir & GT_USER_INTERRUPT) {
+			dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+			DRM_WAKEUP(&dev_priv->irq_queue);
+		}
+
+		de_iir = new_de_iir;
+		gt_iir = new_gt_iir;
+	}
+
+	return ret;
+}
+
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -212,6 +294,9 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 
 	atomic_inc(&dev_priv->irq_received);
 
+	if (IS_IGDNG(dev))
+		return igdng_irq_handler(dev);
+
 	iir = I915_READ(IIR);
 
 	if (IS_I965G(dev)) {
@@ -349,8 +434,12 @@ void i915_user_irq_get(struct drm_device *dev)
 	unsigned long irqflags;
 
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1))
-		i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+	if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
+		if (IS_IGDNG(dev))
+			igdng_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+		else
+			i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
@@ -361,8 +450,12 @@ void i915_user_irq_put(struct drm_device *dev)
 
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
-	if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0))
-		i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+	if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
+		if (IS_IGDNG(dev))
+			igdng_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+		else
+			i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
@@ -455,6 +548,9 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
 	if (!(pipeconf & PIPEACONF_ENABLE))
 		return -EINVAL;
 
+	if (IS_IGDNG(dev))
+		return 0;
+
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	if (IS_I965G(dev))
 		i915_enable_pipestat(dev_priv, pipe,
@@ -474,6 +570,9 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
 
+	if (IS_IGDNG(dev))
+		return;
+
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	i915_disable_pipestat(dev_priv, pipe,
 			      PIPE_VBLANK_INTERRUPT_ENABLE |
@@ -484,7 +583,9 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
 void i915_enable_interrupt (struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	opregion_enable_asle(dev);
+
+	if (!IS_IGDNG(dev))
+		opregion_enable_asle(dev);
 	dev_priv->irq_enabled = 1;
 }
 
@@ -545,12 +646,65 @@ int i915_vblank_swap(struct drm_device *dev, void *data,
 
 /* drm_dma.h hooks
 */
+static void igdng_irq_preinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	I915_WRITE(HWSTAM, 0xeffe);
+
+	/* XXX hotplug from PCH */
+
+	I915_WRITE(DEIMR, 0xffffffff);
+	I915_WRITE(DEIER, 0x0);
+	(void) I915_READ(DEIER);
+
+	/* and GT */
+	I915_WRITE(GTIMR, 0xffffffff);
+	I915_WRITE(GTIER, 0x0);
+	(void) I915_READ(GTIER);
+}
+
+static int igdng_irq_postinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	/* enable kind of interrupts always enabled */
+	u32 display_mask = DE_MASTER_IRQ_CONTROL /*| DE_PCH_EVENT */;
+	u32 render_mask = GT_USER_INTERRUPT;
+
+	dev_priv->irq_mask_reg = ~display_mask;
+	dev_priv->de_irq_enable_reg = display_mask;
+
+	/* should always can generate irq */
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+	I915_WRITE(DEIMR, dev_priv->irq_mask_reg);
+	I915_WRITE(DEIER, dev_priv->de_irq_enable_reg);
+	(void) I915_READ(DEIER);
+
+	/* user interrupt should be enabled, but masked initial */
+	dev_priv->gt_irq_mask_reg = 0xffffffff;
+	dev_priv->gt_irq_enable_reg = render_mask;
+
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask_reg);
+	I915_WRITE(GTIER, dev_priv->gt_irq_enable_reg);
+	(void) I915_READ(GTIER);
+
+	return 0;
+}
+
 void i915_driver_irq_preinstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
 	atomic_set(&dev_priv->irq_received, 0);
 
+	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+
+	if (IS_IGDNG(dev)) {
+		igdng_irq_preinstall(dev);
+		return;
+	}
+
 	if (I915_HAS_HOTPLUG(dev)) {
 		I915_WRITE(PORT_HOTPLUG_EN, 0);
 		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
@@ -562,7 +716,6 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 	I915_WRITE(IMR, 0xffffffff);
 	I915_WRITE(IER, 0x0);
 	(void) I915_READ(IER);
-	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
 }
 
 int i915_driver_irq_postinstall(struct drm_device *dev)
@@ -570,9 +723,12 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
 
+	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
+
 	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 
-	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_IGDNG(dev))
+		return igdng_irq_postinstall(dev);
 
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
@@ -613,11 +769,24 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 	(void) I915_READ(IER);
 
 	opregion_enable_asle(dev);
-	DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
 
 	return 0;
 }
 
+static void igdng_irq_uninstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	I915_WRITE(HWSTAM, 0xffffffff);
+
+	I915_WRITE(DEIMR, 0xffffffff);
+	I915_WRITE(DEIER, 0x0);
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+
+	I915_WRITE(GTIMR, 0xffffffff);
+	I915_WRITE(GTIER, 0x0);
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+}
+
 void i915_driver_irq_uninstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -627,6 +796,11 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
 
 	dev_priv->vblank_pipe = 0;
 
+	if (IS_IGDNG(dev)) {
+		igdng_irq_uninstall(dev);
+		return;
+	}
+
 	if (I915_HAS_HOTPLUG(dev)) {
 		I915_WRITE(PORT_HOTPLUG_EN, 0);
 		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 52119473226..f6237a0b113 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -190,7 +190,8 @@
 #define   I830_FENCE_SIZE_BITS(size)	((ffs((size) >> 19) - 1) << 8)
 #define   I830_FENCE_PITCH_SHIFT	4
 #define   I830_FENCE_REG_VALID		(1<<0)
-#define   I830_FENCE_MAX_PITCH_VAL	0x10
+#define   I915_FENCE_MAX_PITCH_VAL	0x10
+#define   I830_FENCE_MAX_PITCH_VAL	6
 #define   I830_FENCE_MAX_SIZE_VAL	(1<<8)
 
 #define   I915_FENCE_START_MASK		0x0ff00000
@@ -449,6 +450,13 @@
 #define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
 #define   PLL_REF_INPUT_MASK		(3 << 13)
 #define   PLL_LOAD_PULSE_PHASE_SHIFT		9
+/* IGDNG */
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT     9
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK      (7 << 9)
+# define PLL_REF_SDVO_HDMI_MULTIPLIER(x)	(((x)-1) << 9)
+# define DPLL_FPA1_P1_POST_DIV_SHIFT            0
+# define DPLL_FPA1_P1_POST_DIV_MASK             0xff
+
 /*
  * Parallel to Serial Load Pulse phase selection.
  * Selects the phase for the 10X DPLL clock for the PCIe
@@ -526,6 +534,7 @@
 #define   DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
 #define D_STATE		0x6104
 #define CG_2D_DIS	0x6200
+#define DPCUNIT_CLOCK_GATE_DISABLE	(1 << 24)
 #define CG_3D_DIS	0x6204
 
 /*
@@ -629,8 +638,11 @@
 /* Hotplug control (945+ only) */
 #define PORT_HOTPLUG_EN		0x61110
 #define   HDMIB_HOTPLUG_INT_EN			(1 << 29)
+#define   DPB_HOTPLUG_INT_EN			(1 << 29)
 #define   HDMIC_HOTPLUG_INT_EN			(1 << 28)
+#define   DPC_HOTPLUG_INT_EN			(1 << 28)
 #define   HDMID_HOTPLUG_INT_EN			(1 << 27)
+#define   DPD_HOTPLUG_INT_EN			(1 << 27)
 #define   SDVOB_HOTPLUG_INT_EN			(1 << 26)
 #define   SDVOC_HOTPLUG_INT_EN			(1 << 25)
 #define   TV_HOTPLUG_INT_EN			(1 << 18)
@@ -663,8 +675,11 @@
 
 #define PORT_HOTPLUG_STAT	0x61114
 #define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)
+#define   DPB_HOTPLUG_INT_STATUS		(1 << 29)
 #define   HDMIC_HOTPLUG_INT_STATUS		(1 << 28)
+#define   DPC_HOTPLUG_INT_STATUS		(1 << 28)
 #define   HDMID_HOTPLUG_INT_STATUS		(1 << 27)
+#define   DPD_HOTPLUG_INT_STATUS		(1 << 27)
 #define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
 #define   TV_HOTPLUG_INT_STATUS			(1 << 10)
 #define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
@@ -949,15 +964,15 @@
 # define DAC_A_1_3_V			(0 << 4)
 # define DAC_A_1_1_V			(1 << 4)
 # define DAC_A_0_7_V			(2 << 4)
-# define DAC_A_OFF			(3 << 4)
+# define DAC_A_MASK			(3 << 4)
 # define DAC_B_1_3_V			(0 << 2)
 # define DAC_B_1_1_V			(1 << 2)
 # define DAC_B_0_7_V			(2 << 2)
-# define DAC_B_OFF			(3 << 2)
+# define DAC_B_MASK			(3 << 2)
 # define DAC_C_1_3_V			(0 << 0)
 # define DAC_C_1_1_V			(1 << 0)
 # define DAC_C_0_7_V			(2 << 0)
-# define DAC_C_OFF			(3 << 0)
+# define DAC_C_MASK			(3 << 0)
 
 /**
  * CSC coefficients are stored in a floating point format with 9 bits of
@@ -1326,6 +1341,163 @@
 #define TV_V_CHROMA_0		0x68400
 #define TV_V_CHROMA_42		0x684a8
 
+/* Display Port */
+#define DP_B				0x64100
+#define DP_C				0x64200
+#define DP_D				0x64300
+
+#define   DP_PORT_EN			(1 << 31)
+#define   DP_PIPEB_SELECT		(1 << 30)
+
+/* Link training mode - select a suitable mode for each stage */
+#define   DP_LINK_TRAIN_PAT_1		(0 << 28)
+#define   DP_LINK_TRAIN_PAT_2		(1 << 28)
+#define   DP_LINK_TRAIN_PAT_IDLE	(2 << 28)
+#define   DP_LINK_TRAIN_OFF		(3 << 28)
+#define   DP_LINK_TRAIN_MASK		(3 << 28)
+#define   DP_LINK_TRAIN_SHIFT		28
+
+/* Signal voltages. These are mostly controlled by the other end */
+#define   DP_VOLTAGE_0_4		(0 << 25)
+#define   DP_VOLTAGE_0_6		(1 << 25)
+#define   DP_VOLTAGE_0_8		(2 << 25)
+#define   DP_VOLTAGE_1_2		(3 << 25)
+#define   DP_VOLTAGE_MASK		(7 << 25)
+#define   DP_VOLTAGE_SHIFT		25
+
+/* Signal pre-emphasis levels, like voltages, the other end tells us what
+ * they want
+ */
+#define   DP_PRE_EMPHASIS_0		(0 << 22)
+#define   DP_PRE_EMPHASIS_3_5		(1 << 22)
+#define   DP_PRE_EMPHASIS_6		(2 << 22)
+#define   DP_PRE_EMPHASIS_9_5		(3 << 22)
+#define   DP_PRE_EMPHASIS_MASK		(7 << 22)
+#define   DP_PRE_EMPHASIS_SHIFT		22
+
+/* How many wires to use. I guess 3 was too hard */
+#define   DP_PORT_WIDTH_1		(0 << 19)
+#define   DP_PORT_WIDTH_2		(1 << 19)
+#define   DP_PORT_WIDTH_4		(3 << 19)
+#define   DP_PORT_WIDTH_MASK		(7 << 19)
+
+/* Mystic DPCD version 1.1 special mode */
+#define   DP_ENHANCED_FRAMING		(1 << 18)
+
+/** locked once port is enabled */
+#define   DP_PORT_REVERSAL		(1 << 15)
+
+/** sends the clock on lane 15 of the PEG for debug */
+#define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)
+
+#define   DP_SCRAMBLING_DISABLE		(1 << 12)
+
+/** limit RGB values to avoid confusing TVs */
+#define   DP_COLOR_RANGE_16_235		(1 << 8)
+
+/** Turn on the audio link */
+#define   DP_AUDIO_OUTPUT_ENABLE	(1 << 6)
+
+/** vs and hs sync polarity */
+#define   DP_SYNC_VS_HIGH		(1 << 4)
+#define   DP_SYNC_HS_HIGH		(1 << 3)
+
+/** A fantasy */
+#define   DP_DETECTED			(1 << 2)
+
+/** The aux channel provides a way to talk to the
+ * signal sink for DDC etc. Max packet size supported
+ * is 20 bytes in each direction, hence the 5 fixed
+ * data registers
+ */
+#define DPB_AUX_CH_CTL			0x64110
+#define DPB_AUX_CH_DATA1		0x64114
+#define DPB_AUX_CH_DATA2		0x64118
+#define DPB_AUX_CH_DATA3		0x6411c
+#define DPB_AUX_CH_DATA4		0x64120
+#define DPB_AUX_CH_DATA5		0x64124
+
+#define DPC_AUX_CH_CTL			0x64210
+#define DPC_AUX_CH_DATA1		0x64214
+#define DPC_AUX_CH_DATA2		0x64218
+#define DPC_AUX_CH_DATA3		0x6421c
+#define DPC_AUX_CH_DATA4		0x64220
+#define DPC_AUX_CH_DATA5		0x64224
+
+#define DPD_AUX_CH_CTL			0x64310
+#define DPD_AUX_CH_DATA1		0x64314
+#define DPD_AUX_CH_DATA2		0x64318
+#define DPD_AUX_CH_DATA3		0x6431c
+#define DPD_AUX_CH_DATA4		0x64320
+#define DPD_AUX_CH_DATA5		0x64324
+
+#define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
+#define   DP_AUX_CH_CTL_DONE		    (1 << 30)
+#define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)
+#define   DP_AUX_CH_CTL_TIME_OUT_ERROR	    (1 << 28)
+#define   DP_AUX_CH_CTL_TIME_OUT_400us	    (0 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_600us	    (1 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_800us	    (2 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_1600us	    (3 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_MASK	    (3 << 26)
+#define   DP_AUX_CH_CTL_RECEIVE_ERROR	    (1 << 25)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_MASK    (0x1f << 20)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT   20
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_MASK   (0xf << 16)
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT  16
+#define   DP_AUX_CH_CTL_AUX_AKSV_SELECT	    (1 << 15)
+#define   DP_AUX_CH_CTL_MANCHESTER_TEST	    (1 << 14)
+#define   DP_AUX_CH_CTL_SYNC_TEST	    (1 << 13)
+#define   DP_AUX_CH_CTL_DEGLITCH_TEST	    (1 << 12)
+#define   DP_AUX_CH_CTL_PRECHARGE_TEST	    (1 << 11)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK    (0x7ff)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT   0
+
+/*
+ * Computing GMCH M and N values for the Display Port link
+ *
+ * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes
+ *
+ * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz)
+ *
+ * The GMCH value is used internally
+ *
+ * bytes_per_pixel is the number of bytes coming out of the plane,
+ * which is after the LUTs, so we want the bytes for our color format.
+ * For our current usage, this is always 3, one byte for R, G and B.
+ */
+#define PIPEA_GMCH_DATA_M			0x70050
+#define PIPEB_GMCH_DATA_M			0x71050
+
+/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */
+#define   PIPE_GMCH_DATA_M_TU_SIZE_MASK		(0x3f << 25)
+#define   PIPE_GMCH_DATA_M_TU_SIZE_SHIFT	25
+
+#define   PIPE_GMCH_DATA_M_MASK			(0xffffff)
+
+#define PIPEA_GMCH_DATA_N			0x70054
+#define PIPEB_GMCH_DATA_N			0x71054
+#define   PIPE_GMCH_DATA_N_MASK			(0xffffff)
+
+/*
+ * Computing Link M and N values for the Display Port link
+ *
+ * Link M / N = pixel_clock / ls_clk
+ *
+ * (the DP spec calls pixel_clock the 'strm_clk')
+ *
+ * The Link value is transmitted in the Main Stream
+ * Attributes and VB-ID.
+ */
+
+#define PIPEA_DP_LINK_M				0x70060
+#define PIPEB_DP_LINK_M				0x71060
+#define   PIPEA_DP_LINK_M_MASK			(0xffffff)
+
+#define PIPEA_DP_LINK_N				0x70064
+#define PIPEB_DP_LINK_N				0x71064
+#define   PIPEA_DP_LINK_N_MASK			(0xffffff)
+
 /* Display & cursor control */
 
 /* Pipe A */
@@ -1409,9 +1581,25 @@
 
 /* Cursor A & B regs */
 #define CURACNTR		0x70080
+/* Old style CUR*CNTR flags (desktop 8xx) */
+#define   CURSOR_ENABLE		0x80000000
+#define   CURSOR_GAMMA_ENABLE	0x40000000
+#define   CURSOR_STRIDE_MASK	0x30000000
+#define   CURSOR_FORMAT_SHIFT	24
+#define   CURSOR_FORMAT_MASK	(0x07 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_2C	(0x00 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_3C	(0x01 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_4C	(0x02 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_ARGB	(0x04 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_XRGB	(0x05 << CURSOR_FORMAT_SHIFT)
+/* New style CUR*CNTR flags */
+#define   CURSOR_MODE		0x27
 #define   CURSOR_MODE_DISABLE   0x00
 #define   CURSOR_MODE_64_32B_AX 0x07
 #define   CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define   MCURSOR_PIPE_SELECT	(1 << 28)
+#define   MCURSOR_PIPE_A	0x00
+#define   MCURSOR_PIPE_B	(1 << 28)
 #define   MCURSOR_GAMMA_ENABLE  (1 << 26)
 #define CURABASE		0x70084
 #define CURAPOS			0x70088
@@ -1419,6 +1607,7 @@
 #define   CURSOR_POS_SIGN       0x8000
 #define   CURSOR_X_SHIFT        0
 #define   CURSOR_Y_SHIFT        16
+#define CURSIZE			0x700a0
 #define CURBCNTR		0x700c0
 #define CURBBASE		0x700c4
 #define CURBPOS			0x700c8
@@ -1498,4 +1687,444 @@
 # define VGA_2X_MODE				(1 << 30)
 # define VGA_PIPE_B_SELECT			(1 << 29)
 
+/* IGDNG */
+
+#define CPU_VGACNTRL	0x41000
+
+#define DIGITAL_PORT_HOTPLUG_CNTRL      0x44030
+#define  DIGITAL_PORTA_HOTPLUG_ENABLE           (1 << 4)
+#define  DIGITAL_PORTA_SHORT_PULSE_2MS          (0 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_4_5MS        (1 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_6MS          (2 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_100MS        (3 << 2)
+#define  DIGITAL_PORTA_NO_DETECT                (0 << 0)
+#define  DIGITAL_PORTA_LONG_PULSE_DETECT_MASK   (1 << 1)
+#define  DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK  (1 << 0)
+
+/* refresh rate hardware control */
+#define RR_HW_CTL       0x45300
+#define  RR_HW_LOW_POWER_FRAMES_MASK    0xff
+#define  RR_HW_HIGH_POWER_FRAMES_MASK   0xff00
+
+#define FDI_PLL_BIOS_0  0x46000
+#define FDI_PLL_BIOS_1  0x46004
+#define FDI_PLL_BIOS_2  0x46008
+#define DISPLAY_PORT_PLL_BIOS_0         0x4600c
+#define DISPLAY_PORT_PLL_BIOS_1         0x46010
+#define DISPLAY_PORT_PLL_BIOS_2         0x46014
+
+#define FDI_PLL_FREQ_CTL        0x46030
+#define  FDI_PLL_FREQ_CHANGE_REQUEST    (1<<24)
+#define  FDI_PLL_FREQ_LOCK_LIMIT_MASK   0xfff00
+#define  FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK  0xff
+
+
+#define PIPEA_DATA_M1           0x60030
+#define  TU_SIZE(x)             (((x)-1) << 25) /* default size 64 */
+#define  TU_SIZE_MASK           0x7e000000
+#define  PIPEA_DATA_M1_OFFSET   0
+#define PIPEA_DATA_N1           0x60034
+#define  PIPEA_DATA_N1_OFFSET   0
+
+#define PIPEA_DATA_M2           0x60038
+#define  PIPEA_DATA_M2_OFFSET   0
+#define PIPEA_DATA_N2           0x6003c
+#define  PIPEA_DATA_N2_OFFSET   0
+
+#define PIPEA_LINK_M1           0x60040
+#define  PIPEA_LINK_M1_OFFSET   0
+#define PIPEA_LINK_N1           0x60044
+#define  PIPEA_LINK_N1_OFFSET   0
+
+#define PIPEA_LINK_M2           0x60048
+#define  PIPEA_LINK_M2_OFFSET   0
+#define PIPEA_LINK_N2           0x6004c
+#define  PIPEA_LINK_N2_OFFSET   0
+
+/* PIPEB timing regs are same start from 0x61000 */
+
+#define PIPEB_DATA_M1           0x61030
+#define  PIPEB_DATA_M1_OFFSET   0
+#define PIPEB_DATA_N1           0x61034
+#define  PIPEB_DATA_N1_OFFSET   0
+
+#define PIPEB_DATA_M2           0x61038
+#define  PIPEB_DATA_M2_OFFSET   0
+#define PIPEB_DATA_N2           0x6103c
+#define  PIPEB_DATA_N2_OFFSET   0
+
+#define PIPEB_LINK_M1           0x61040
+#define  PIPEB_LINK_M1_OFFSET   0
+#define PIPEB_LINK_N1           0x61044
+#define  PIPEB_LINK_N1_OFFSET   0
+
+#define PIPEB_LINK_M2           0x61048
+#define  PIPEB_LINK_M2_OFFSET   0
+#define PIPEB_LINK_N2           0x6104c
+#define  PIPEB_LINK_N2_OFFSET   0
+
+/* CPU panel fitter */
+#define PFA_CTL_1               0x68080
+#define PFB_CTL_1               0x68880
+#define  PF_ENABLE              (1<<31)
+
+/* legacy palette */
+#define LGC_PALETTE_A           0x4a000
+#define LGC_PALETTE_B           0x4a800
+
+/* interrupts */
+#define DE_MASTER_IRQ_CONTROL   (1 << 31)
+#define DE_SPRITEB_FLIP_DONE    (1 << 29)
+#define DE_SPRITEA_FLIP_DONE    (1 << 28)
+#define DE_PLANEB_FLIP_DONE     (1 << 27)
+#define DE_PLANEA_FLIP_DONE     (1 << 26)
+#define DE_PCU_EVENT            (1 << 25)
+#define DE_GTT_FAULT            (1 << 24)
+#define DE_POISON               (1 << 23)
+#define DE_PERFORM_COUNTER      (1 << 22)
+#define DE_PCH_EVENT            (1 << 21)
+#define DE_AUX_CHANNEL_A        (1 << 20)
+#define DE_DP_A_HOTPLUG         (1 << 19)
+#define DE_GSE                  (1 << 18)
+#define DE_PIPEB_VBLANK         (1 << 15)
+#define DE_PIPEB_EVEN_FIELD     (1 << 14)
+#define DE_PIPEB_ODD_FIELD      (1 << 13)
+#define DE_PIPEB_LINE_COMPARE   (1 << 12)
+#define DE_PIPEB_VSYNC          (1 << 11)
+#define DE_PIPEB_FIFO_UNDERRUN  (1 << 8)
+#define DE_PIPEA_VBLANK         (1 << 7)
+#define DE_PIPEA_EVEN_FIELD     (1 << 6)
+#define DE_PIPEA_ODD_FIELD      (1 << 5)
+#define DE_PIPEA_LINE_COMPARE   (1 << 4)
+#define DE_PIPEA_VSYNC          (1 << 3)
+#define DE_PIPEA_FIFO_UNDERRUN  (1 << 0)
+
+#define DEISR   0x44000
+#define DEIMR   0x44004
+#define DEIIR   0x44008
+#define DEIER   0x4400c
+
+/* GT interrupt */
+#define GT_SYNC_STATUS          (1 << 2)
+#define GT_USER_INTERRUPT       (1 << 0)
+
+#define GTISR   0x44010
+#define GTIMR   0x44014
+#define GTIIR   0x44018
+#define GTIER   0x4401c
+
+/* PCH */
+
+/* south display engine interrupt */
+#define SDE_CRT_HOTPLUG         (1 << 11)
+#define SDE_PORTD_HOTPLUG       (1 << 10)
+#define SDE_PORTC_HOTPLUG       (1 << 9)
+#define SDE_PORTB_HOTPLUG       (1 << 8)
+#define SDE_SDVOB_HOTPLUG       (1 << 6)
+
+#define SDEISR  0xc4000
+#define SDEIMR  0xc4004
+#define SDEIIR  0xc4008
+#define SDEIER  0xc400c
+
+/* digital port hotplug */
+#define PCH_PORT_HOTPLUG        0xc4030
+#define PORTD_HOTPLUG_ENABLE            (1 << 20)
+#define PORTD_PULSE_DURATION_2ms        (0)
+#define PORTD_PULSE_DURATION_4_5ms      (1 << 18)
+#define PORTD_PULSE_DURATION_6ms        (2 << 18)
+#define PORTD_PULSE_DURATION_100ms      (3 << 18)
+#define PORTD_HOTPLUG_NO_DETECT         (0)
+#define PORTD_HOTPLUG_SHORT_DETECT      (1 << 16)
+#define PORTD_HOTPLUG_LONG_DETECT       (1 << 17)
+#define PORTC_HOTPLUG_ENABLE            (1 << 12)
+#define PORTC_PULSE_DURATION_2ms        (0)
+#define PORTC_PULSE_DURATION_4_5ms      (1 << 10)
+#define PORTC_PULSE_DURATION_6ms        (2 << 10)
+#define PORTC_PULSE_DURATION_100ms      (3 << 10)
+#define PORTC_HOTPLUG_NO_DETECT         (0)
+#define PORTC_HOTPLUG_SHORT_DETECT      (1 << 8)
+#define PORTC_HOTPLUG_LONG_DETECT       (1 << 9)
+#define PORTB_HOTPLUG_ENABLE            (1 << 4)
+#define PORTB_PULSE_DURATION_2ms        (0)
+#define PORTB_PULSE_DURATION_4_5ms      (1 << 2)
+#define PORTB_PULSE_DURATION_6ms        (2 << 2)
+#define PORTB_PULSE_DURATION_100ms      (3 << 2)
+#define PORTB_HOTPLUG_NO_DETECT         (0)
+#define PORTB_HOTPLUG_SHORT_DETECT      (1 << 0)
+#define PORTB_HOTPLUG_LONG_DETECT       (1 << 1)
+
+#define PCH_GPIOA               0xc5010
+#define PCH_GPIOB               0xc5014
+#define PCH_GPIOC               0xc5018
+#define PCH_GPIOD               0xc501c
+#define PCH_GPIOE               0xc5020
+#define PCH_GPIOF               0xc5024
+
+#define PCH_DPLL_A              0xc6014
+#define PCH_DPLL_B              0xc6018
+
+#define PCH_FPA0                0xc6040
+#define PCH_FPA1                0xc6044
+#define PCH_FPB0                0xc6048
+#define PCH_FPB1                0xc604c
+
+#define PCH_DPLL_TEST           0xc606c
+
+#define PCH_DREF_CONTROL        0xC6200
+#define  DREF_CONTROL_MASK      0x7fc3
+#define  DREF_CPU_SOURCE_OUTPUT_DISABLE         (0<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD      (2<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_NONSPREAD       (3<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_MASK		(3<<13)
+#define  DREF_SSC_SOURCE_DISABLE                (0<<11)
+#define  DREF_SSC_SOURCE_ENABLE                 (2<<11)
+#define  DREF_SSC_SOURCE_MASK			(2<<11)
+#define  DREF_NONSPREAD_SOURCE_DISABLE          (0<<9)
+#define  DREF_NONSPREAD_CK505_ENABLE		(1<<9)
+#define  DREF_NONSPREAD_SOURCE_ENABLE           (2<<9)
+#define  DREF_NONSPREAD_SOURCE_MASK		(2<<9)
+#define  DREF_SUPERSPREAD_SOURCE_DISABLE        (0<<7)
+#define  DREF_SUPERSPREAD_SOURCE_ENABLE         (2<<7)
+#define  DREF_SSC4_DOWNSPREAD                   (0<<6)
+#define  DREF_SSC4_CENTERSPREAD                 (1<<6)
+#define  DREF_SSC1_DISABLE                      (0<<1)
+#define  DREF_SSC1_ENABLE                       (1<<1)
+#define  DREF_SSC4_DISABLE                      (0)
+#define  DREF_SSC4_ENABLE                       (1)
+
+#define PCH_RAWCLK_FREQ         0xc6204
+#define  FDL_TP1_TIMER_SHIFT    12
+#define  FDL_TP1_TIMER_MASK     (3<<12)
+#define  FDL_TP2_TIMER_SHIFT    10
+#define  FDL_TP2_TIMER_MASK     (3<<10)
+#define  RAWCLK_FREQ_MASK       0x3ff
+
+#define PCH_DPLL_TMR_CFG        0xc6208
+
+#define PCH_SSC4_PARMS          0xc6210
+#define PCH_SSC4_AUX_PARMS      0xc6214
+
+/* transcoder */
+
+#define TRANS_HTOTAL_A          0xe0000
+#define  TRANS_HTOTAL_SHIFT     16
+#define  TRANS_HACTIVE_SHIFT    0
+#define TRANS_HBLANK_A          0xe0004
+#define  TRANS_HBLANK_END_SHIFT 16
+#define  TRANS_HBLANK_START_SHIFT 0
+#define TRANS_HSYNC_A           0xe0008
+#define  TRANS_HSYNC_END_SHIFT  16
+#define  TRANS_HSYNC_START_SHIFT 0
+#define TRANS_VTOTAL_A          0xe000c
+#define  TRANS_VTOTAL_SHIFT     16
+#define  TRANS_VACTIVE_SHIFT    0
+#define TRANS_VBLANK_A          0xe0010
+#define  TRANS_VBLANK_END_SHIFT 16
+#define  TRANS_VBLANK_START_SHIFT 0
+#define TRANS_VSYNC_A           0xe0014
+#define  TRANS_VSYNC_END_SHIFT  16
+#define  TRANS_VSYNC_START_SHIFT 0
+
+#define TRANSA_DATA_M1          0xe0030
+#define TRANSA_DATA_N1          0xe0034
+#define TRANSA_DATA_M2          0xe0038
+#define TRANSA_DATA_N2          0xe003c
+#define TRANSA_DP_LINK_M1       0xe0040
+#define TRANSA_DP_LINK_N1       0xe0044
+#define TRANSA_DP_LINK_M2       0xe0048
+#define TRANSA_DP_LINK_N2       0xe004c
+
+#define TRANS_HTOTAL_B          0xe1000
+#define TRANS_HBLANK_B          0xe1004
+#define TRANS_HSYNC_B           0xe1008
+#define TRANS_VTOTAL_B          0xe100c
+#define TRANS_VBLANK_B          0xe1010
+#define TRANS_VSYNC_B           0xe1014
+
+#define TRANSB_DATA_M1          0xe1030
+#define TRANSB_DATA_N1          0xe1034
+#define TRANSB_DATA_M2          0xe1038
+#define TRANSB_DATA_N2          0xe103c
+#define TRANSB_DP_LINK_M1       0xe1040
+#define TRANSB_DP_LINK_N1       0xe1044
+#define TRANSB_DP_LINK_M2       0xe1048
+#define TRANSB_DP_LINK_N2       0xe104c
+
+#define TRANSACONF              0xf0008
+#define TRANSBCONF              0xf1008
+#define  TRANS_DISABLE          (0<<31)
+#define  TRANS_ENABLE           (1<<31)
+#define  TRANS_STATE_MASK       (1<<30)
+#define  TRANS_STATE_DISABLE    (0<<30)
+#define  TRANS_STATE_ENABLE     (1<<30)
+#define  TRANS_FSYNC_DELAY_HB1  (0<<27)
+#define  TRANS_FSYNC_DELAY_HB2  (1<<27)
+#define  TRANS_FSYNC_DELAY_HB3  (2<<27)
+#define  TRANS_FSYNC_DELAY_HB4  (3<<27)
+#define  TRANS_DP_AUDIO_ONLY    (1<<26)
+#define  TRANS_DP_VIDEO_AUDIO   (0<<26)
+#define  TRANS_PROGRESSIVE      (0<<21)
+#define  TRANS_8BPC             (0<<5)
+#define  TRANS_10BPC            (1<<5)
+#define  TRANS_6BPC             (2<<5)
+#define  TRANS_12BPC            (3<<5)
+
+#define FDI_RXA_CHICKEN         0xc200c
+#define FDI_RXB_CHICKEN         0xc2010
+#define  FDI_RX_PHASE_SYNC_POINTER_ENABLE       (1)
+
+/* CPU: FDI_TX */
+#define FDI_TXA_CTL             0x60100
+#define FDI_TXB_CTL             0x61100
+#define  FDI_TX_DISABLE         (0<<31)
+#define  FDI_TX_ENABLE          (1<<31)
+#define  FDI_LINK_TRAIN_PATTERN_1       (0<<28)
+#define  FDI_LINK_TRAIN_PATTERN_2       (1<<28)
+#define  FDI_LINK_TRAIN_PATTERN_IDLE    (2<<28)
+#define  FDI_LINK_TRAIN_NONE            (3<<28)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_4V    (0<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_6V    (1<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_8V    (2<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_1_2V    (3<<25)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_2X   (2<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_3X   (3<<22)
+#define  FDI_DP_PORT_WIDTH_X1           (0<<19)
+#define  FDI_DP_PORT_WIDTH_X2           (1<<19)
+#define  FDI_DP_PORT_WIDTH_X3           (2<<19)
+#define  FDI_DP_PORT_WIDTH_X4           (3<<19)
+#define  FDI_TX_ENHANCE_FRAME_ENABLE    (1<<18)
+/* IGDNG: hardwired to 1 */
+#define  FDI_TX_PLL_ENABLE              (1<<14)
+/* both Tx and Rx */
+#define  FDI_SCRAMBLING_ENABLE          (0<<7)
+#define  FDI_SCRAMBLING_DISABLE         (1<<7)
+
+/* FDI_RX, FDI_X is hard-wired to Transcoder_X */
+#define FDI_RXA_CTL             0xf000c
+#define FDI_RXB_CTL             0xf100c
+#define  FDI_RX_ENABLE          (1<<31)
+#define  FDI_RX_DISABLE         (0<<31)
+/* train, dp width same as FDI_TX */
+#define  FDI_DP_PORT_WIDTH_X8           (7<<19)
+#define  FDI_8BPC                       (0<<16)
+#define  FDI_10BPC                      (1<<16)
+#define  FDI_6BPC                       (2<<16)
+#define  FDI_12BPC                      (3<<16)
+#define  FDI_LINK_REVERSE_OVERWRITE     (1<<15)
+#define  FDI_DMI_LINK_REVERSE_MASK      (1<<14)
+#define  FDI_RX_PLL_ENABLE              (1<<13)
+#define  FDI_FS_ERR_CORRECT_ENABLE      (1<<11)
+#define  FDI_FE_ERR_CORRECT_ENABLE      (1<<10)
+#define  FDI_FS_ERR_REPORT_ENABLE       (1<<9)
+#define  FDI_FE_ERR_REPORT_ENABLE       (1<<8)
+#define  FDI_RX_ENHANCE_FRAME_ENABLE    (1<<6)
+#define  FDI_SEL_RAWCLK                 (0<<4)
+#define  FDI_SEL_PCDCLK                 (1<<4)
+
+#define FDI_RXA_MISC            0xf0010
+#define FDI_RXB_MISC            0xf1010
+#define FDI_RXA_TUSIZE1         0xf0030
+#define FDI_RXA_TUSIZE2         0xf0038
+#define FDI_RXB_TUSIZE1         0xf1030
+#define FDI_RXB_TUSIZE2         0xf1038
+
+/* FDI_RX interrupt register format */
+#define FDI_RX_INTER_LANE_ALIGN         (1<<10)
+#define FDI_RX_SYMBOL_LOCK              (1<<9) /* train 2 */
+#define FDI_RX_BIT_LOCK                 (1<<8) /* train 1 */
+#define FDI_RX_TRAIN_PATTERN_2_FAIL     (1<<7)
+#define FDI_RX_FS_CODE_ERR              (1<<6)
+#define FDI_RX_FE_CODE_ERR              (1<<5)
+#define FDI_RX_SYMBOL_ERR_RATE_ABOVE    (1<<4)
+#define FDI_RX_HDCP_LINK_FAIL           (1<<3)
+#define FDI_RX_PIXEL_FIFO_OVERFLOW      (1<<2)
+#define FDI_RX_CROSS_CLOCK_OVERFLOW     (1<<1)
+#define FDI_RX_SYMBOL_QUEUE_OVERFLOW    (1<<0)
+
+#define FDI_RXA_IIR             0xf0014
+#define FDI_RXA_IMR             0xf0018
+#define FDI_RXB_IIR             0xf1014
+#define FDI_RXB_IMR             0xf1018
+
+#define FDI_PLL_CTL_1           0xfe000
+#define FDI_PLL_CTL_2           0xfe004
+
+/* CRT */
+#define PCH_ADPA                0xe1100
+#define  ADPA_TRANS_SELECT_MASK (1<<30)
+#define  ADPA_TRANS_A_SELECT    0
+#define  ADPA_TRANS_B_SELECT    (1<<30)
+#define  ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
+#define  ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MONO  (2<<24)
+#define  ADPA_CRT_HOTPLUG_ENABLE        (1<<23)
+#define  ADPA_CRT_HOTPLUG_PERIOD_64     (0<<22)
+#define  ADPA_CRT_HOTPLUG_PERIOD_128    (1<<22)
+#define  ADPA_CRT_HOTPLUG_WARMUP_5MS    (0<<21)
+#define  ADPA_CRT_HOTPLUG_WARMUP_10MS   (1<<21)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_2S     (0<<20)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_4S     (1<<20)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_40    (0<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_50    (1<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_60    (2<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_70    (3<<18)
+#define  ADPA_CRT_HOTPLUG_VOLREF_325MV  (0<<17)
+#define  ADPA_CRT_HOTPLUG_VOLREF_475MV  (1<<17)
+#define  ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
+
+/* or SDVOB */
+#define HDMIB   0xe1140
+#define  PORT_ENABLE    (1 << 31)
+#define  TRANSCODER_A   (0)
+#define  TRANSCODER_B   (1 << 30)
+#define  COLOR_FORMAT_8bpc      (0)
+#define  COLOR_FORMAT_12bpc     (3 << 26)
+#define  SDVOB_HOTPLUG_ENABLE   (1 << 23)
+#define  SDVO_ENCODING          (0)
+#define  TMDS_ENCODING          (2 << 10)
+#define  NULL_PACKET_VSYNC_ENABLE       (1 << 9)
+#define  SDVOB_BORDER_ENABLE    (1 << 7)
+#define  AUDIO_ENABLE           (1 << 6)
+#define  VSYNC_ACTIVE_HIGH      (1 << 4)
+#define  HSYNC_ACTIVE_HIGH      (1 << 3)
+#define  PORT_DETECTED          (1 << 2)
+
+#define HDMIC   0xe1150
+#define HDMID   0xe1160
+
+#define PCH_LVDS	0xe1180
+#define  LVDS_DETECTED	(1 << 1)
+
+#define BLC_PWM_CPU_CTL2	0x48250
+#define  PWM_ENABLE		(1 << 31)
+#define  PWM_PIPE_A		(0 << 29)
+#define  PWM_PIPE_B		(1 << 29)
+#define BLC_PWM_CPU_CTL		0x48254
+
+#define BLC_PWM_PCH_CTL1	0xc8250
+#define  PWM_PCH_ENABLE		(1 << 31)
+#define  PWM_POLARITY_ACTIVE_LOW	(1 << 29)
+#define  PWM_POLARITY_ACTIVE_HIGH	(0 << 29)
+#define  PWM_POLARITY_ACTIVE_LOW2	(1 << 28)
+#define  PWM_POLARITY_ACTIVE_HIGH2	(0 << 28)
+
+#define BLC_PWM_PCH_CTL2	0xc8254
+
+#define PCH_PP_STATUS		0xc7200
+#define PCH_PP_CONTROL		0xc7204
+#define  EDP_FORCE_VDD		(1 << 3)
+#define  EDP_BLC_ENABLE		(1 << 2)
+#define  PANEL_POWER_RESET	(1 << 1)
+#define  PANEL_POWER_OFF	(0 << 0)
+#define  PANEL_POWER_ON		(1 << 0)
+#define PCH_PP_ON_DELAYS	0xc7208
+#define  EDP_PANEL		(1 << 30)
+#define PCH_PP_OFF_DELAYS	0xc720c
+#define PCH_PP_DIVISOR		0xc7210
+
 #endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index d669cc2b42c..a98e2831ed3 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -295,6 +295,16 @@ int i915_save_state(struct drm_device *dev)
 	i915_save_palette(dev, PIPE_B);
 	dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
 
+	/* Cursor state */
+	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+	dev_priv->saveCURABASE = I915_READ(CURABASE);
+	dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+	dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+	dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+	if (!IS_I9XX(dev))
+		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
 	/* CRT state */
 	dev_priv->saveADPA = I915_READ(ADPA);
 
@@ -349,6 +359,18 @@ int i915_save_state(struct drm_device *dev)
 	for (i = 0; i < 3; i++)
 		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
 
+	/* Fences */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+	} else {
+		for (i = 0; i < 8; i++)
+			dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+	}
 	i915_save_vga(dev);
 
 	return 0;
@@ -371,6 +393,18 @@ int i915_restore_state(struct drm_device *dev)
 	/* Display arbitration */
 	I915_WRITE(DSPARB, dev_priv->saveDSPARB);
 
+	/* Fences */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+	}
+
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -456,6 +490,16 @@ int i915_restore_state(struct drm_device *dev)
 	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
 	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	/* Cursor state */
+	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+	I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+	I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+	I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+	I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+	if (!IS_I9XX(dev))
+		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
 	/* CRT state */
 	I915_WRITE(ADPA, dev_priv->saveADPA);
 
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index fc28e2bbd54..754dd22fdd7 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -30,6 +30,8 @@
 #include "i915_drv.h"
 #include "intel_bios.h"
 
+#define	SLAVE_ADDR1	0x70
+#define	SLAVE_ADDR2	0x72
 
 static void *
 find_section(struct bdb_header *bdb, int section_id)
@@ -57,9 +59,43 @@ find_section(struct bdb_header *bdb, int section_id)
 	return NULL;
 }
 
-/* Try to find panel data */
 static void
-parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
+			struct lvds_dvo_timing *dvo_timing)
+{
+	panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
+		dvo_timing->hactive_lo;
+	panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
+		((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
+	panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
+		dvo_timing->hsync_pulse_width;
+	panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
+		((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+
+	panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
+		dvo_timing->vactive_lo;
+	panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
+		dvo_timing->vsync_off;
+	panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
+		dvo_timing->vsync_pulse_width;
+	panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
+		((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
+	panel_fixed_mode->clock = dvo_timing->clock * 10;
+	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+
+	/* Some VBTs have bogus h/vtotal values */
+	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
+	drm_mode_set_name(panel_fixed_mode);
+}
+
+/* Try to find integrated panel data */
+static void
+parse_lfp_panel_data(struct drm_i915_private *dev_priv,
+			    struct bdb_header *bdb)
 {
 	struct bdb_lvds_options *lvds_options;
 	struct bdb_lvds_lfp_data *lvds_lfp_data;
@@ -91,38 +127,45 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 	panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
 				      DRM_MEM_DRIVER);
 
-	panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
-		dvo_timing->hactive_lo;
-	panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
-		((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
-	panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
-		dvo_timing->hsync_pulse_width;
-	panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
-		((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+	fill_detail_timing_data(panel_fixed_mode, dvo_timing);
 
-	panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
-		dvo_timing->vactive_lo;
-	panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
-		dvo_timing->vsync_off;
-	panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
-		dvo_timing->vsync_pulse_width;
-	panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
-		((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
-	panel_fixed_mode->clock = dvo_timing->clock * 10;
-	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+	dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
 
-	/* Some VBTs have bogus h/vtotal values */
-	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
-		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
-	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
-		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+	DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
+	drm_mode_debug_printmodeline(panel_fixed_mode);
 
-	drm_mode_set_name(panel_fixed_mode);
+	return;
+}
 
-	dev_priv->vbt_mode = panel_fixed_mode;
+/* Try to find sdvo panel data */
+static void
+parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
+		      struct bdb_header *bdb)
+{
+	struct bdb_sdvo_lvds_options *sdvo_lvds_options;
+	struct lvds_dvo_timing *dvo_timing;
+	struct drm_display_mode *panel_fixed_mode;
 
-	DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
-	drm_mode_debug_printmodeline(panel_fixed_mode);
+	dev_priv->sdvo_lvds_vbt_mode = NULL;
+
+	sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
+	if (!sdvo_lvds_options)
+		return;
+
+	dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
+	if (!dvo_timing)
+		return;
+
+	panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
+				      DRM_MEM_DRIVER);
+
+	if (!panel_fixed_mode)
+		return;
+
+	fill_detail_timing_data(panel_fixed_mode,
+			dvo_timing + sdvo_lvds_options->panel_type);
+
+	dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode;
 
 	return;
 }
@@ -152,6 +195,88 @@ parse_general_features(struct drm_i915_private *dev_priv,
 	}
 }
 
+static void
+parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct sdvo_device_mapping *p_mapping;
+	struct bdb_general_definitions *p_defs;
+	struct child_device_config *p_child;
+	int i, child_device_num, count;
+	u16	block_size, *block_ptr;
+
+	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (!p_defs) {
+		DRM_DEBUG("No general definition block is found\n");
+		return;
+	}
+	/* judge whether the size of child device meets the requirements.
+	 * If the child device size obtained from general definition block
+	 * is different with sizeof(struct child_device_config), skip the
+	 * parsing of sdvo device info
+	 */
+	if (p_defs->child_dev_size != sizeof(*p_child)) {
+		/* different child dev size . Ignore it */
+		DRM_DEBUG("different child size is found. Invalid.\n");
+		return;
+	}
+	/* get the block size of general definitions */
+	block_ptr = (u16 *)((char *)p_defs - 2);
+	block_size = *block_ptr;
+	/* get the number of child device */
+	child_device_num = (block_size - sizeof(*p_defs)) /
+				sizeof(*p_child);
+	count = 0;
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		if (p_child->slave_addr != SLAVE_ADDR1 &&
+			p_child->slave_addr != SLAVE_ADDR2) {
+			/*
+			 * If the slave address is neither 0x70 nor 0x72,
+			 * it is not a SDVO device. Skip it.
+			 */
+			continue;
+		}
+		if (p_child->dvo_port != DEVICE_PORT_DVOB &&
+			p_child->dvo_port != DEVICE_PORT_DVOC) {
+			/* skip the incorrect SDVO port */
+			DRM_DEBUG("Incorrect SDVO port. Skip it \n");
+			continue;
+		}
+		DRM_DEBUG("the SDVO device with slave addr %2x is found on "
+				"%s port\n",
+				p_child->slave_addr,
+				(p_child->dvo_port == DEVICE_PORT_DVOB) ?
+					"SDVOB" : "SDVOC");
+		p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]);
+		if (!p_mapping->initialized) {
+			p_mapping->dvo_port = p_child->dvo_port;
+			p_mapping->slave_addr = p_child->slave_addr;
+			p_mapping->dvo_wiring = p_child->dvo_wiring;
+			p_mapping->initialized = 1;
+		} else {
+			DRM_DEBUG("Maybe one SDVO port is shared by "
+					 "two SDVO device.\n");
+		}
+		if (p_child->slave2_addr) {
+			/* Maybe this is a SDVO device with multiple inputs */
+			/* And the mapping info is not added */
+			DRM_DEBUG("there exists the slave2_addr. Maybe this "
+				"is a SDVO device with multiple inputs.\n");
+		}
+		count++;
+	}
+
+	if (!count) {
+		/* No SDVO device info is found */
+		DRM_DEBUG("No SDVO device info is found in VBT\n");
+	}
+	return;
+}
 /**
  * intel_init_bios - initialize VBIOS settings & find VBT
  * @dev: DRM device
@@ -199,8 +324,9 @@ intel_init_bios(struct drm_device *dev)
 
 	/* Grab useful general definitions */
 	parse_general_features(dev_priv, bdb);
-	parse_panel_data(dev_priv, bdb);
-
+	parse_lfp_panel_data(dev_priv, bdb);
+	parse_sdvo_panel_data(dev_priv, bdb);
+	parse_sdvo_device_mapping(dev_priv, bdb);
 	pci_unmap_rom(pdev, bios);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index de621aad85b..fe72e1c225d 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -135,6 +135,86 @@ struct bdb_general_features {
 	u8 rsvd11:6; /* finish byte */
 } __attribute__((packed));
 
+/* pre-915 */
+#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
+#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
+#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
+#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
+
+/* Pre 915 */
+#define DEVICE_TYPE_NONE	0x00
+#define DEVICE_TYPE_CRT		0x01
+#define DEVICE_TYPE_TV		0x09
+#define DEVICE_TYPE_EFP		0x12
+#define DEVICE_TYPE_LFP		0x22
+/* On 915+ */
+#define DEVICE_TYPE_CRT_DPMS		0x6001
+#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
+#define DEVICE_TYPE_TV_COMPOSITE	0x0209
+#define DEVICE_TYPE_TV_MACROVISION	0x0289
+#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
+#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
+#define DEVICE_TYPE_TV_SCART		0x0209
+#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
+#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
+#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
+#define DEVICE_TYPE_EFP_DVI_I		0x6053
+#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
+#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
+#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
+#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
+#define DEVICE_TYPE_LFP_PANELLINK	0x5012
+#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
+#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
+#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
+#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
+
+#define DEVICE_CFG_NONE		0x00
+#define DEVICE_CFG_12BIT_DVOB	0x01
+#define DEVICE_CFG_12BIT_DVOC	0x02
+#define DEVICE_CFG_24BIT_DVOBC	0x09
+#define DEVICE_CFG_24BIT_DVOCB	0x0a
+#define DEVICE_CFG_DUAL_DVOB	0x11
+#define DEVICE_CFG_DUAL_DVOC	0x12
+#define DEVICE_CFG_DUAL_DVOBC	0x13
+#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
+#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
+
+#define DEVICE_WIRE_NONE	0x00
+#define DEVICE_WIRE_DVOB	0x01
+#define DEVICE_WIRE_DVOC	0x02
+#define DEVICE_WIRE_DVOBC	0x03
+#define DEVICE_WIRE_DVOBB	0x05
+#define DEVICE_WIRE_DVOCC	0x06
+#define DEVICE_WIRE_DVOB_MASTER 0x0d
+#define DEVICE_WIRE_DVOC_MASTER 0x0e
+
+#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
+#define DEVICE_PORT_DVOB	0x01
+#define DEVICE_PORT_DVOC	0x02
+
+struct child_device_config {
+	u16 handle;
+	u16 device_type;
+	u8  device_id[10]; /* See DEVICE_TYPE_* above */
+	u16 addin_offset;
+	u8  dvo_port; /* See Device_PORT_* above */
+	u8  i2c_pin;
+	u8  slave_addr;
+	u8  ddc_pin;
+	u16 edid_ptr;
+	u8  dvo_cfg; /* See DEVICE_CFG_* above */
+	u8  dvo2_port;
+	u8  i2c2_pin;
+	u8  slave2_addr;
+	u8  ddc2_pin;
+	u8  capabilities;
+	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
+	u8  dvo2_wiring;
+	u16 extended_type;
+	u8  dvo_function;
+} __attribute__((packed));
+
 struct bdb_general_definitions {
 	/* DDC GPIO */
 	u8 crt_ddc_gmbus_pin;
@@ -149,14 +229,19 @@ struct bdb_general_definitions {
 	u8 boot_display[2];
 	u8 child_dev_size;
 
-	/* device info */
-	u8 tv_or_lvds_info[33];
-	u8 dev1[33];
-	u8 dev2[33];
-	u8 dev3[33];
-	u8 dev4[33];
-	/* may be another device block here on some platforms */
-};
+	/*
+	 * Device info:
+	 * If TV is present, it'll be at devices[0].
+	 * LVDS will be next, either devices[0] or [1], if present.
+	 * On some platforms the number of device is 6. But could be as few as
+	 * 4 if both TV and LVDS are missing.
+	 * And the device num is related with the size of general definition
+	 * block. It is obtained by using the following formula:
+	 * number = (block_size - sizeof(bdb_general_definitions))/
+	 * 		sizeof(child_device_config);
+	 */
+	struct child_device_config devices[0];
+} __attribute__((packed));
 
 struct bdb_lvds_options {
 	u8 panel_type;
@@ -279,6 +364,23 @@ struct vch_bdb_22 {
 	struct vch_panel_data panels[16];
 } __attribute__((packed));
 
+struct bdb_sdvo_lvds_options {
+	u8 panel_backlight;
+	u8 h40_set_panel_type;
+	u8 panel_type;
+	u8 ssc_clk_freq;
+	u16 als_low_trip;
+	u16 als_high_trip;
+	u8 sclalarcoeff_tab_row_num;
+	u8 sclalarcoeff_tab_row_size;
+	u8 coefficient[8];
+	u8 panel_misc_bits_1;
+	u8 panel_misc_bits_2;
+	u8 panel_misc_bits_3;
+	u8 panel_misc_bits_4;
+} __attribute__((packed));
+
+
 bool intel_init_bios(struct drm_device *dev);
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9bdd959260a..6de97fc6602 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -37,9 +37,14 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 temp;
+	u32 temp, reg;
 
-	temp = I915_READ(ADPA);
+	if (IS_IGDNG(dev))
+		reg = PCH_ADPA;
+	else
+		reg = ADPA;
+
+	temp = I915_READ(reg);
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp |= ADPA_DAC_ENABLE;
 
@@ -58,7 +63,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 		break;
 	}
 
-	I915_WRITE(ADPA, temp);
+	I915_WRITE(reg, temp);
 }
 
 static int intel_crt_mode_valid(struct drm_connector *connector,
@@ -101,17 +106,23 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int dpll_md_reg;
 	u32 adpa, dpll_md;
+	u32 adpa_reg;
 
 	if (intel_crtc->pipe == 0)
 		dpll_md_reg = DPLL_A_MD;
 	else
 		dpll_md_reg = DPLL_B_MD;
 
+	if (IS_IGDNG(dev))
+		adpa_reg = PCH_ADPA;
+	else
+		adpa_reg = ADPA;
+
 	/*
 	 * Disable separate mode multiplier used when cloning SDVO to CRT
 	 * XXX this needs to be adjusted when we really are cloning
 	 */
-	if (IS_I965G(dev)) {
+	if (IS_I965G(dev) && !IS_IGDNG(dev)) {
 		dpll_md = I915_READ(dpll_md_reg);
 		I915_WRITE(dpll_md_reg,
 			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
@@ -125,13 +136,53 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 
 	if (intel_crtc->pipe == 0) {
 		adpa |= ADPA_PIPE_A_SELECT;
-		I915_WRITE(BCLRPAT_A, 0);
+		if (!IS_IGDNG(dev))
+			I915_WRITE(BCLRPAT_A, 0);
 	} else {
 		adpa |= ADPA_PIPE_B_SELECT;
-		I915_WRITE(BCLRPAT_B, 0);
+		if (!IS_IGDNG(dev))
+			I915_WRITE(BCLRPAT_B, 0);
 	}
 
-	I915_WRITE(ADPA, adpa);
+	I915_WRITE(adpa_reg, adpa);
+}
+
+static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 adpa, temp;
+	bool ret;
+
+	temp = adpa = I915_READ(PCH_ADPA);
+
+	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+
+	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
+			ADPA_CRT_HOTPLUG_WARMUP_10MS |
+			ADPA_CRT_HOTPLUG_SAMPLE_4S |
+			ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
+			ADPA_CRT_HOTPLUG_VOLREF_325MV |
+			ADPA_CRT_HOTPLUG_ENABLE |
+			ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
+
+	DRM_DEBUG("pch crt adpa 0x%x", adpa);
+	I915_WRITE(PCH_ADPA, adpa);
+
+	/* This might not be needed as not specified in spec...*/
+	udelay(1000);
+
+	/* Check the status to see if both blue and green are on now */
+	adpa = I915_READ(PCH_ADPA);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) ==
+			ADPA_CRT_HOTPLUG_MONITOR_COLOR)
+		ret = true;
+	else
+		ret = false;
+
+	/* restore origin register */
+	I915_WRITE(PCH_ADPA, temp);
+	return ret;
 }
 
 /**
@@ -148,6 +199,10 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 hotplug_en;
 	int i, tries = 0;
+
+	if (IS_IGDNG(dev))
+		return intel_igdng_crt_detect_hotplug(connector);
+
 	/*
 	 * On 4 series desktop, CRT detect sequence need to be done twice
 	 * to get a reliable result.
@@ -161,7 +216,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
-	if (IS_GM45(dev))
+	if (IS_G4X(dev))
 		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
 
 	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
@@ -198,9 +253,142 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 	return intel_ddc_probe(intel_output);
 }
 
+static enum drm_connector_status
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+{
+	struct drm_encoder *encoder = &intel_output->enc;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint32_t pipe = intel_crtc->pipe;
+	uint32_t save_bclrpat;
+	uint32_t save_vtotal;
+	uint32_t vtotal, vactive;
+	uint32_t vsample;
+	uint32_t vblank, vblank_start, vblank_end;
+	uint32_t dsl;
+	uint32_t bclrpat_reg;
+	uint32_t vtotal_reg;
+	uint32_t vblank_reg;
+	uint32_t vsync_reg;
+	uint32_t pipeconf_reg;
+	uint32_t pipe_dsl_reg;
+	uint8_t	st00;
+	enum drm_connector_status status;
+
+	if (pipe == 0) {
+		bclrpat_reg = BCLRPAT_A;
+		vtotal_reg = VTOTAL_A;
+		vblank_reg = VBLANK_A;
+		vsync_reg = VSYNC_A;
+		pipeconf_reg = PIPEACONF;
+		pipe_dsl_reg = PIPEADSL;
+	} else {
+		bclrpat_reg = BCLRPAT_B;
+		vtotal_reg = VTOTAL_B;
+		vblank_reg = VBLANK_B;
+		vsync_reg = VSYNC_B;
+		pipeconf_reg = PIPEBCONF;
+		pipe_dsl_reg = PIPEBDSL;
+	}
+
+	save_bclrpat = I915_READ(bclrpat_reg);
+	save_vtotal = I915_READ(vtotal_reg);
+	vblank = I915_READ(vblank_reg);
+
+	vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
+	vactive = (save_vtotal & 0x7ff) + 1;
+
+	vblank_start = (vblank & 0xfff) + 1;
+	vblank_end = ((vblank >> 16) & 0xfff) + 1;
+
+	/* Set the border color to purple. */
+	I915_WRITE(bclrpat_reg, 0x500050);
+
+	if (IS_I9XX(dev)) {
+		uint32_t pipeconf = I915_READ(pipeconf_reg);
+		I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+		/* Wait for next Vblank to substitue
+		 * border color for Color info */
+		intel_wait_for_vblank(dev);
+		st00 = I915_READ8(VGA_MSR_WRITE);
+		status = ((st00 & (1 << 4)) != 0) ?
+			connector_status_connected :
+			connector_status_disconnected;
+
+		I915_WRITE(pipeconf_reg, pipeconf);
+	} else {
+		bool restore_vblank = false;
+		int count, detect;
+
+		/*
+		* If there isn't any border, add some.
+		* Yes, this will flicker
+		*/
+		if (vblank_start <= vactive && vblank_end >= vtotal) {
+			uint32_t vsync = I915_READ(vsync_reg);
+			uint32_t vsync_start = (vsync & 0xffff) + 1;
+
+			vblank_start = vsync_start;
+			I915_WRITE(vblank_reg,
+				   (vblank_start - 1) |
+				   ((vblank_end - 1) << 16));
+			restore_vblank = true;
+		}
+		/* sample in the vertical border, selecting the larger one */
+		if (vblank_start - vactive >= vtotal - vblank_end)
+			vsample = (vblank_start + vactive) >> 1;
+		else
+			vsample = (vtotal + vblank_end) >> 1;
+
+		/*
+		 * Wait for the border to be displayed
+		 */
+		while (I915_READ(pipe_dsl_reg) >= vactive)
+			;
+		while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
+			;
+		/*
+		 * Watch ST00 for an entire scanline
+		 */
+		detect = 0;
+		count = 0;
+		do {
+			count++;
+			/* Read the ST00 VGA status register */
+			st00 = I915_READ8(VGA_MSR_WRITE);
+			if (st00 & (1 << 4))
+				detect++;
+		} while ((I915_READ(pipe_dsl_reg) == dsl));
+
+		/* restore vblank if necessary */
+		if (restore_vblank)
+			I915_WRITE(vblank_reg, vblank);
+		/*
+		 * If more than 3/4 of the scanline detected a monitor,
+		 * then it is assumed to be present. This works even on i830,
+		 * where there isn't any way to force the border color across
+		 * the screen
+		 */
+		status = detect * 4 > count * 3 ?
+			 connector_status_connected :
+			 connector_status_disconnected;
+	}
+
+	/* Restore previous settings */
+	I915_WRITE(bclrpat_reg, save_bclrpat);
+
+	return status;
+}
+
 static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_encoder *encoder = &intel_output->enc;
+	struct drm_crtc *crtc;
+	int dpms_mode;
+	enum drm_connector_status status;
 
 	if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
 		if (intel_crt_detect_hotplug(connector))
@@ -212,8 +400,20 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto
 	if (intel_crt_detect_ddc(connector))
 		return connector_status_connected;
 
-	/* TODO use load detect */
-	return connector_status_unknown;
+	/* for pre-945g platforms use load detect */
+	if (encoder->crtc && encoder->crtc->enabled) {
+		status = intel_crt_load_detect(encoder->crtc, intel_output);
+	} else {
+		crtc = intel_get_load_detect_pipe(intel_output,
+						  NULL, &dpms_mode);
+		if (crtc) {
+			status = intel_crt_load_detect(crtc, intel_output);
+			intel_release_load_detect_pipe(intel_output, dpms_mode);
+		} else
+			status = connector_status_unknown;
+	}
+
+	return status;
 }
 
 static void intel_crt_destroy(struct drm_connector *connector)
@@ -236,11 +436,6 @@ static int intel_crt_set_property(struct drm_connector *connector,
 				  struct drm_property *property,
 				  uint64_t value)
 {
-	struct drm_device *dev = connector->dev;
-
-	if (property == dev->mode_config.dpms_property && connector->encoder)
-		intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
 	return 0;
 }
 
@@ -257,6 +452,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = intel_crt_destroy,
@@ -282,6 +478,7 @@ void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
+	u32 i2c_reg;
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output)
@@ -298,7 +495,11 @@ void intel_crt_init(struct drm_device *dev)
 					  &intel_output->enc);
 
 	/* Set up the DDC bus. */
-	intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+	if (IS_IGDNG(dev))
+		i2c_reg = PCH_GPIOA;
+	else
+		i2c_reg = GPIOA;
+	intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
 	if (!intel_output->ddc_bus) {
 		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
 			   "failed.\n");
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bdcda36953b..028f5b66e3d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -137,6 +137,8 @@ struct intel_limit {
 #define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS   7
 #define INTEL_LIMIT_IGD_SDVO_DAC    8
 #define INTEL_LIMIT_IGD_LVDS	    9
+#define INTEL_LIMIT_IGDNG_SDVO_DAC  10
+#define INTEL_LIMIT_IGDNG_LVDS	    11
 
 /*The parameter is for SDVO on G4x platform*/
 #define G4X_DOT_SDVO_MIN           25000
@@ -216,12 +218,43 @@ struct intel_limit {
 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 
+/* IGDNG */
+/* as we calculate clock using (register_value + 2) for
+   N/M1/M2, so here the range value for them is (actual_value-2).
+ */
+#define IGDNG_DOT_MIN         25000
+#define IGDNG_DOT_MAX         350000
+#define IGDNG_VCO_MIN         1760000
+#define IGDNG_VCO_MAX         3510000
+#define IGDNG_N_MIN           1
+#define IGDNG_N_MAX           5
+#define IGDNG_M_MIN           79
+#define IGDNG_M_MAX           118
+#define IGDNG_M1_MIN          12
+#define IGDNG_M1_MAX          23
+#define IGDNG_M2_MIN          5
+#define IGDNG_M2_MAX          9
+#define IGDNG_P_SDVO_DAC_MIN  5
+#define IGDNG_P_SDVO_DAC_MAX  80
+#define IGDNG_P_LVDS_MIN      28
+#define IGDNG_P_LVDS_MAX      112
+#define IGDNG_P1_MIN          1
+#define IGDNG_P1_MAX          8
+#define IGDNG_P2_SDVO_DAC_SLOW 10
+#define IGDNG_P2_SDVO_DAC_FAST 5
+#define IGDNG_P2_LVDS_SLOW    14 /* single channel */
+#define IGDNG_P2_LVDS_FAST    7  /* double channel */
+#define IGDNG_P2_DOT_LIMIT    225000 /* 225Mhz */
+
 static bool
 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		    int target, int refclk, intel_clock_t *best_clock);
 static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *best_clock);
 
 static const intel_limit_t intel_limits[] = {
     { /* INTEL_LIMIT_I8XX_DVO_DAC */
@@ -383,9 +416,47 @@ static const intel_limit_t intel_limits[] = {
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
     },
-
+    { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
+	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
+	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
+	.m   = { .min = IGDNG_M_MIN,            .max = IGDNG_M_MAX },
+	.m1  = { .min = IGDNG_M1_MIN,           .max = IGDNG_M1_MAX },
+	.m2  = { .min = IGDNG_M2_MIN,           .max = IGDNG_M2_MAX },
+	.p   = { .min = IGDNG_P_SDVO_DAC_MIN,   .max = IGDNG_P_SDVO_DAC_MAX },
+	.p1  = { .min = IGDNG_P1_MIN,           .max = IGDNG_P1_MAX },
+	.p2  = { .dot_limit = IGDNG_P2_DOT_LIMIT,
+		 .p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
+		 .p2_fast = IGDNG_P2_SDVO_DAC_FAST },
+	.find_pll = intel_igdng_find_best_PLL,
+    },
+    { /* INTEL_LIMIT_IGDNG_LVDS */
+	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
+	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
+	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
+	.m   = { .min = IGDNG_M_MIN,            .max = IGDNG_M_MAX },
+	.m1  = { .min = IGDNG_M1_MIN,           .max = IGDNG_M1_MAX },
+	.m2  = { .min = IGDNG_M2_MIN,           .max = IGDNG_M2_MAX },
+	.p   = { .min = IGDNG_P_LVDS_MIN,       .max = IGDNG_P_LVDS_MAX },
+	.p1  = { .min = IGDNG_P1_MIN,           .max = IGDNG_P1_MAX },
+	.p2  = { .dot_limit = IGDNG_P2_DOT_LIMIT,
+		 .p2_slow = IGDNG_P2_LVDS_SLOW,
+		 .p2_fast = IGDNG_P2_LVDS_FAST },
+	.find_pll = intel_igdng_find_best_PLL,
+    },
 };
 
+static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
+{
+	const intel_limit_t *limit;
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+		limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+	else
+		limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+
+	return limit;
+}
+
 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -418,7 +489,9 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	const intel_limit_t *limit;
 
-	if (IS_G4X(dev)) {
+	if (IS_IGDNG(dev))
+		limit = intel_igdng_limit(crtc);
+	else if (IS_G4X(dev)) {
 		limit = intel_g4x_limit(crtc);
 	} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
@@ -630,7 +703,64 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			}
 		}
 	}
+	return found;
+}
 
+static bool
+intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	int max_n;
+	bool found;
+	int err_most = 47;
+	found = false;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+	max_n = limit->n.max;
+	/* based on hardware requriment prefer smaller n to precision */
+	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		/* based on hardware requirment prefere larger m1,m2, p1 */
+		for (clock.m1 = limit->m1.max;
+		     clock.m1 >= limit->m1.min; clock.m1--) {
+			for (clock.m2 = limit->m2.max;
+			     clock.m2 >= limit->m2.min; clock.m2--) {
+				for (clock.p1 = limit->p1.max;
+				     clock.p1 >= limit->p1.min; clock.p1--) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+					if (!intel_PLL_is_valid(crtc, &clock))
+						continue;
+					this_err = abs((10000 - (target*10000/clock.dot)));
+					if (this_err < err_most) {
+						*best_clock = clock;
+						err_most = this_err;
+						max_n = clock.n;
+						found = true;
+						/* found on first matching */
+						goto out;
+					}
+				}
+			}
+		}
+	}
+out:
 	return found;
 }
 
@@ -785,18 +915,292 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	return 0;
 }
 
+static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->pipe;
+	int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
+	int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
+	int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
+	int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
+	int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
+	int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
+	int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+	int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B;
+	int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B;
+	int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B;
+	int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B;
+	int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
+	int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
+	u32 temp;
+	int tries = 5, j;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		DRM_DEBUG("crtc %d dpms on\n", pipe);
+		/* enable PCH DPLL */
+		temp = I915_READ(pch_dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+			I915_READ(pch_dpll_reg);
+		}
 
+		/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+		temp = I915_READ(fdi_rx_reg);
+		I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+				FDI_SEL_PCDCLK |
+				FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+		I915_READ(fdi_rx_reg);
+		udelay(200);
+
+		/* Enable CPU FDI TX PLL, always on for IGDNG */
+		temp = I915_READ(fdi_tx_reg);
+		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+			I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+			I915_READ(fdi_tx_reg);
+			udelay(100);
+		}
 
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+		/* Enable CPU pipe */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+			I915_READ(pipeconf_reg);
+			udelay(100);
+		}
+
+		/* configure and enable CPU plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+		}
+
+		/* enable CPU FDI TX and PCH FDI RX */
+		temp = I915_READ(fdi_tx_reg);
+		temp |= FDI_TX_ENABLE;
+		temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_tx_reg, temp);
+		I915_READ(fdi_tx_reg);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+		I915_READ(fdi_rx_reg);
+
+		udelay(150);
+
+		/* Train FDI. */
+		/* umask FDI RX Interrupt symbol_lock and bit_lock bit
+		   for train result */
+		temp = I915_READ(fdi_rx_imr_reg);
+		temp &= ~FDI_RX_SYMBOL_LOCK;
+		temp &= ~FDI_RX_BIT_LOCK;
+		I915_WRITE(fdi_rx_imr_reg, temp);
+		I915_READ(fdi_rx_imr_reg);
+		udelay(150);
+
+		temp = I915_READ(fdi_rx_iir_reg);
+		DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_BIT_LOCK) == 0) {
+			for (j = 0; j < tries; j++) {
+				temp = I915_READ(fdi_rx_iir_reg);
+				DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+				if (temp & FDI_RX_BIT_LOCK)
+					break;
+				udelay(200);
+			}
+			if (j != tries)
+				I915_WRITE(fdi_rx_iir_reg,
+						temp | FDI_RX_BIT_LOCK);
+			else
+				DRM_DEBUG("train 1 fail\n");
+		} else {
+			I915_WRITE(fdi_rx_iir_reg,
+					temp | FDI_RX_BIT_LOCK);
+			DRM_DEBUG("train 1 ok 2!\n");
+		}
+		temp = I915_READ(fdi_tx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+		I915_WRITE(fdi_tx_reg, temp);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+		I915_WRITE(fdi_rx_reg, temp);
+
+		udelay(150);
+
+		temp = I915_READ(fdi_rx_iir_reg);
+		DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+			for (j = 0; j < tries; j++) {
+				temp = I915_READ(fdi_rx_iir_reg);
+				DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+				if (temp & FDI_RX_SYMBOL_LOCK)
+					break;
+				udelay(200);
+			}
+			if (j != tries) {
+				I915_WRITE(fdi_rx_iir_reg,
+						temp | FDI_RX_SYMBOL_LOCK);
+				DRM_DEBUG("train 2 ok 1!\n");
+			} else
+				DRM_DEBUG("train 2 fail\n");
+		} else {
+			I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG("train 2 ok 2!\n");
+		}
+		DRM_DEBUG("train done\n");
+
+		/* set transcoder timing */
+		I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+		I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+		I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+
+		I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+		I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+		I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+
+		/* enable PCH transcoder */
+		temp = I915_READ(transconf_reg);
+		I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+		I915_READ(transconf_reg);
+
+		while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+			;
+
+		/* enable normal */
+
+		temp = I915_READ(fdi_tx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+				FDI_TX_ENHANCE_FRAME_ENABLE);
+		I915_READ(fdi_tx_reg);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+				FDI_RX_ENHANCE_FRAME_ENABLE);
+		I915_READ(fdi_rx_reg);
+
+		/* wait one idle pattern time */
+		udelay(100);
+
+		intel_crtc_load_lut(crtc);
+
+	break;
+	case DRM_MODE_DPMS_OFF:
+		DRM_DEBUG("crtc %d dpms off\n", pipe);
+
+		/* Disable the VGA plane that we never use */
+		I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Disable display plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+			I915_READ(dspbase_reg);
+		}
+
+		/* disable cpu pipe, disable after all planes disabled */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			I915_READ(pipeconf_reg);
+			/* wait for cpu pipe off, pipe state */
+			while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
+				;
+		} else
+			DRM_DEBUG("crtc %d is disabled\n", pipe);
+
+		/* IGDNG-A : disable cpu panel fitter ? */
+		temp = I915_READ(pf_ctl_reg);
+		if ((temp & PF_ENABLE) != 0) {
+			I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+			I915_READ(pf_ctl_reg);
+		}
+
+		/* disable CPU FDI tx and PCH FDI rx */
+		temp = I915_READ(fdi_tx_reg);
+		I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
+		I915_READ(fdi_tx_reg);
+
+		temp = I915_READ(fdi_rx_reg);
+		I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
+		I915_READ(fdi_rx_reg);
+
+		/* still set train pattern 1 */
+		temp = I915_READ(fdi_tx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_tx_reg, temp);
+
+		temp = I915_READ(fdi_rx_reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(fdi_rx_reg, temp);
+
+		/* disable PCH transcoder */
+		temp = I915_READ(transconf_reg);
+		if ((temp & TRANS_ENABLE) != 0) {
+			I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
+			I915_READ(transconf_reg);
+			/* wait for PCH transcoder off, transcoder state */
+			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
+				;
+		}
+
+		/* disable PCH DPLL */
+		temp = I915_READ(pch_dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			I915_READ(pch_dpll_reg);
+		}
+
+		temp = I915_READ(fdi_rx_reg);
+		if ((temp & FDI_RX_PLL_ENABLE) != 0) {
+			temp &= ~FDI_SEL_PCDCLK;
+			temp &= ~FDI_RX_PLL_ENABLE;
+			I915_WRITE(fdi_rx_reg, temp);
+			I915_READ(fdi_rx_reg);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+}
+
+static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_master_private *master_priv;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
@@ -805,7 +1209,6 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR;
 	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
 	u32 temp;
-	bool enabled;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -890,6 +1293,26 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 		udelay(150);
 		break;
 	}
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_master_private *master_priv;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool enabled;
+
+	if (IS_IGDNG(dev))
+		igdng_crtc_dpms(crtc, mode);
+	else
+		i9xx_crtc_dpms(crtc, mode);
 
 	if (!dev->primary->master)
 		return;
@@ -947,6 +1370,12 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
 {
+	struct drm_device *dev = crtc->dev;
+	if (IS_IGDNG(dev)) {
+		/* FDI link clock is fixed at 2.7G */
+		if (mode->clock * 3 > 27000 * 4)
+			return MODE_CLOCK_HIGH;
+	}
 	return true;
 }
 
@@ -1030,6 +1459,48 @@ static int intel_panel_fitter_pipe (struct drm_device *dev)
 	return 1;
 }
 
+struct fdi_m_n {
+	u32        tu;
+	u32        gmch_m;
+	u32        gmch_n;
+	u32        link_m;
+	u32        link_n;
+};
+
+static void
+fdi_reduce_ratio(u32 *num, u32 *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+#define DATA_N 0x800000
+#define LINK_N 0x80000
+
+static void
+igdng_compute_m_n(int bytes_per_pixel, int nlanes,
+		int pixel_clock, int link_clock,
+		struct fdi_m_n *m_n)
+{
+	u64 temp;
+
+	m_n->tu = 64; /* default size */
+
+	temp = (u64) DATA_N * pixel_clock;
+	temp = div_u64(temp, link_clock);
+	m_n->gmch_m = (temp * bytes_per_pixel) / nlanes;
+	m_n->gmch_n = DATA_N;
+	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+
+	temp = (u64) LINK_N * pixel_clock;
+	m_n->link_m = div_u64(temp, link_clock);
+	m_n->link_n = LINK_N;
+	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
@@ -1063,6 +1534,17 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	struct drm_connector *connector;
 	const intel_limit_t *limit;
 	int ret;
+	struct fdi_m_n m_n = {0};
+	int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1;
+	int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1;
+	int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1;
+	int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1;
+	int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0;
+	int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
+	int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
+	int lvds_reg = LVDS;
+	u32 temp;
+	int sdvo_pixel_multiply;
 
 	drm_vblank_pre_modeset(dev, pipe);
 
@@ -1101,6 +1583,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
 	} else if (IS_I9XX(dev)) {
 		refclk = 96000;
+		if (IS_IGDNG(dev))
+			refclk = 120000; /* 120Mhz refclk */
 	} else {
 		refclk = 48000;
 	}
@@ -1114,6 +1598,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
 	if (!ok) {
 		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		drm_vblank_post_modeset(dev, pipe);
 		return -EINVAL;
 	}
 
@@ -1137,12 +1622,21 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		}
 	}
 
+	/* FDI link */
+	if (IS_IGDNG(dev))
+		igdng_compute_m_n(3, 4, /* lane num 4 */
+				adjusted_mode->clock,
+				270000, /* lane clock */
+				&m_n);
+
 	if (IS_IGD(dev))
 		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
 	else
 		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
 
-	dpll = DPLL_VGA_MODE_DIS;
+	if (!IS_IGDNG(dev))
+		dpll = DPLL_VGA_MODE_DIS;
+
 	if (IS_I9XX(dev)) {
 		if (is_lvds)
 			dpll |= DPLLB_MODE_LVDS;
@@ -1150,17 +1644,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			dpll |= DPLLB_MODE_DAC_SERIAL;
 		if (is_sdvo) {
 			dpll |= DPLL_DVO_HIGH_SPEED;
-			if (IS_I945G(dev) || IS_I945GM(dev)) {
-				int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+			sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+			if (IS_I945G(dev) || IS_I945GM(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
-			}
+			else if (IS_IGDNG(dev))
+				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
 
 		/* compute bitmask from p1 value */
 		if (IS_IGD(dev))
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_IGD;
-		else
+		else {
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			/* also FPA1 */
+			if (IS_IGDNG(dev))
+				dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+		}
 		switch (clock.p2) {
 		case 5:
 			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
@@ -1175,7 +1674,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
 			break;
 		}
-		if (IS_I965G(dev))
+		if (IS_I965G(dev) && !IS_IGDNG(dev))
 			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 	} else {
 		if (is_lvds) {
@@ -1207,10 +1706,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
-	if (pipe == 0)
-		dspcntr |= DISPPLANE_SEL_PIPE_A;
-	else
-		dspcntr |= DISPPLANE_SEL_PIPE_B;
+	/* IGDNG's plane is forced to pipe, bit 24 is to
+	   enable color space conversion */
+	if (!IS_IGDNG(dev)) {
+		if (pipe == 0)
+			dspcntr |= DISPPLANE_SEL_PIPE_A;
+		else
+			dspcntr |= DISPPLANE_SEL_PIPE_B;
+	}
 
 	if (pipe == 0 && !IS_I965G(dev)) {
 		/* Enable pixel doubling when the dot clock is > 90% of the (display)
@@ -1231,12 +1734,17 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 
 	/* Disable the panel fitter if it was on our pipe */
-	if (intel_panel_fitter_pipe(dev) == pipe)
+	if (!IS_IGDNG(dev) && intel_panel_fitter_pipe(dev) == pipe)
 		I915_WRITE(PFIT_CONTROL, 0);
 
 	DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
 	drm_mode_debug_printmodeline(mode);
 
+	/* assign to IGDNG registers */
+	if (IS_IGDNG(dev)) {
+		fp_reg = pch_fp_reg;
+		dpll_reg = pch_dpll_reg;
+	}
 
 	if (dpll & DPLL_VCO_ENABLE) {
 		I915_WRITE(fp_reg, fp);
@@ -1245,13 +1753,33 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		udelay(150);
 	}
 
+	if (IS_IGDNG(dev)) {
+		/* enable PCH clock reference source */
+		/* XXX need to change the setting for other outputs */
+		u32 temp;
+		temp = I915_READ(PCH_DREF_CONTROL);
+		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+		temp |= DREF_NONSPREAD_CK505_ENABLE;
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_ENABLE;
+		temp &= ~DREF_SSC1_ENABLE;
+		/* if no eDP, disable source output to CPU */
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+	}
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
 	 */
 	if (is_lvds) {
-		u32 lvds = I915_READ(LVDS);
+		u32 lvds;
 
+		if (IS_IGDNG(dev))
+			lvds_reg = PCH_LVDS;
+
+		lvds = I915_READ(lvds_reg);
 		lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
 		/* Set the B0-B3 data pairs corresponding to whether we're going to
 		 * set the DPLLs for dual-channel mode or not.
@@ -1266,8 +1794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		 * panels behave in the two modes.
 		 */
 
-		I915_WRITE(LVDS, lvds);
-		I915_READ(LVDS);
+		I915_WRITE(lvds_reg, lvds);
+		I915_READ(lvds_reg);
 	}
 
 	I915_WRITE(fp_reg, fp);
@@ -1276,8 +1804,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* Wait for the clocks to stabilize. */
 	udelay(150);
 
-	if (IS_I965G(dev)) {
-		int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+	if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+		sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
 		I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
 			   ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
 	} else {
@@ -1303,9 +1831,25 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* pipesrc and dspsize control the size that is scaled from, which should
 	 * always be the user's requested size.
 	 */
-	I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
-	I915_WRITE(dsppos_reg, 0);
+	if (!IS_IGDNG(dev)) {
+		I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) |
+				(mode->hdisplay - 1));
+		I915_WRITE(dsppos_reg, 0);
+	}
 	I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	if (IS_IGDNG(dev)) {
+		I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m);
+		I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n);
+		I915_WRITE(link_m1_reg, m_n.link_m);
+		I915_WRITE(link_n1_reg, m_n.link_n);
+
+		 /* enable FDI RX PLL too */
+		temp = I915_READ(fdi_rx_reg);
+		I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+		udelay(200);
+	}
+
 	I915_WRITE(pipeconf_reg, pipeconf);
 	I915_READ(pipeconf_reg);
 
@@ -1315,12 +1859,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Flush the plane changes */
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
-	if (ret != 0)
-	    return ret;
-
 	drm_vblank_post_modeset(dev, pipe);
 
-	return 0;
+	return ret;
 }
 
 /** Loads the palette/gamma unit for the CRTC with the prepared values */
@@ -1336,6 +1877,11 @@ void intel_crtc_load_lut(struct drm_crtc *crtc)
 	if (!crtc->enabled)
 		return;
 
+	/* use legacy palette for IGDNG */
+	if (IS_IGDNG(dev))
+		palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A :
+						   LGC_PALETTE_B;
+
 	for (i = 0; i < 256; i++) {
 		I915_WRITE(palreg + 4 * i,
 			   (intel_crtc->lut_r[i] << 16) |
@@ -1357,7 +1903,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	int pipe = intel_crtc->pipe;
 	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
 	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
-	uint32_t temp;
+	uint32_t temp = I915_READ(control);
 	size_t addr;
 	int ret;
 
@@ -1366,7 +1912,12 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	/* if we want to turn off the cursor ignore width and height */
 	if (!handle) {
 		DRM_DEBUG("cursor off\n");
-		temp = CURSOR_MODE_DISABLE;
+		if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+			temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+			temp |= CURSOR_MODE_DISABLE;
+		} else {
+			temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+		}
 		addr = 0;
 		bo = NULL;
 		mutex_lock(&dev->struct_mutex);
@@ -1409,10 +1960,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 		addr = obj_priv->phys_obj->handle->busaddr;
 	}
 
-	temp = 0;
-	/* set the pipe for the cursor */
-	temp |= (pipe << 28);
-	temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+	if (!IS_I9XX(dev))
+		I915_WRITE(CURSIZE, (height << 12) | width);
+
+	/* Hooray for CUR*CNTR differences */
+	if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+		temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+		temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+		temp |= (pipe << 28); /* Connect to correct pipe */
+	} else {
+		temp &= ~(CURSOR_FORMAT_MASK);
+		temp |= CURSOR_ENABLE;
+		temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
+	}
 
  finish:
 	I915_WRITE(control, temp);
@@ -1450,16 +2010,16 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 	uint32_t adder;
 
 	if (x < 0) {
-		temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+		temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
 		x = -x;
 	}
 	if (y < 0) {
-		temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+		temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
 		y = -y;
 	}
 
-	temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
-	temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+	temp |= x << CURSOR_X_SHIFT;
+	temp |= y << CURSOR_Y_SHIFT;
 
 	adder = intel_crtc->cursor_addr;
 	I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
@@ -1576,6 +2136,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
 	}
 
 	encoder->crtc = crtc;
+	intel_output->base.encoder = encoder;
 	intel_output->load_detect_temp = true;
 
 	intel_crtc = to_intel_crtc(crtc);
@@ -1611,6 +2172,7 @@ void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_
 
 	if (intel_output->load_detect_temp) {
 		encoder->crtc = NULL;
+		intel_output->base.encoder = NULL;
 		intel_output->load_detect_temp = false;
 		crtc->enabled = drm_helper_crtc_in_use(crtc);
 		drm_helper_disable_unused_functions(dev);
@@ -1748,6 +2310,8 @@ static void intel_crtc_destroy(struct drm_crtc *crtc)
 {
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 
+	if (intel_crtc->mode_set.mode)
+		drm_mode_destroy(crtc->dev, intel_crtc->mode_set.mode);
 	drm_crtc_cleanup(crtc);
 	kfree(intel_crtc);
 }
@@ -1804,6 +2368,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	}
 }
 
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+	struct drm_crtc *crtc = NULL;
+	int pipe = -1;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+		if (crtc->base.id == pipe_from_crtc_id->crtc_id) {
+			pipe = intel_crtc->pipe;
+			break;
+		}
+	}
+
+	if (pipe == -1) {
+		DRM_ERROR("no such CRTC id\n");
+		return -EINVAL;
+	}
+
+	pipe_from_crtc_id->pipe = pipe;
+
+       return 0;
+}
+
 struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
 {
 	struct drm_crtc *crtc = NULL;
@@ -1843,7 +2438,24 @@ static void intel_setup_outputs(struct drm_device *dev)
 	if (IS_MOBILE(dev) && !IS_I830(dev))
 		intel_lvds_init(dev);
 
-	if (IS_I9XX(dev)) {
+	if (IS_IGDNG(dev)) {
+		int found;
+
+		if (I915_READ(HDMIB) & PORT_DETECTED) {
+			/* check SDVOB */
+			/* found = intel_sdvo_init(dev, HDMIB); */
+			found = 0;
+			if (!found)
+				intel_hdmi_init(dev, HDMIB);
+		}
+
+		if (I915_READ(HDMIC) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMIC);
+
+		if (I915_READ(HDMID) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMID);
+
+	} else if (IS_I9XX(dev)) {
 		int found;
 		u32 reg;
 
@@ -1867,7 +2479,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 	} else
 		intel_dvo_init(dev);
 
-	if (IS_I9XX(dev) && IS_MOBILE(dev))
+	if (IS_I9XX(dev) && IS_MOBILE(dev) && !IS_IGDNG(dev))
 		intel_tv_init(dev);
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 957daef8edf..cd4b9c5f715 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 void intel_i2c_destroy(struct intel_i2c_chan *chan);
 int intel_ddc_get_modes(struct intel_output *intel_output);
 extern bool intel_ddc_probe(struct intel_output *intel_output);
-
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
 extern void intel_crt_init(struct drm_device *dev);
 extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
 extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
@@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
 
 extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 						    struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
 extern void intel_wait_for_vblank(struct drm_device *dev);
 extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 8b8d6e65cd3..1ee3007d6ec 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -316,6 +316,7 @@ static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
 	.save = intel_dvo_save,
 	.restore = intel_dvo_restore,
 	.detect = intel_dvo_detect,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 3e094beecb9..0ecf6b76a40 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -207,7 +207,7 @@ static int intelfb_set_par(struct fb_info *info)
 
 	if (var->pixclock != -1) {
 
-		DRM_ERROR("PIXEL CLCOK SET\n");
+		DRM_ERROR("PIXEL CLOCK SET\n");
 		return -EINVAL;
 	} else {
 		struct drm_crtc *crtc;
@@ -674,8 +674,12 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *
 	par->crtc_ids[0] = crtc->base.id;
 
 	modeset->num_connectors = conn_count;
-	if (modeset->mode != modeset->crtc->desired_mode)
-		modeset->mode = modeset->crtc->desired_mode;
+	if (modeset->crtc->desired_mode) {
+		if (modeset->mode)
+			drm_mode_destroy(dev, modeset->mode);
+		modeset->mode = drm_mode_duplicate(dev,
+						   modeset->crtc->desired_mode);
+	}
 
 	par->crtc_count = 1;
 
@@ -824,8 +828,12 @@ static int intelfb_single_fb_probe(struct drm_device *dev)
 		par->crtc_ids[crtc_count++] = crtc->base.id;
 
 		modeset->num_connectors = conn_count;
-		if (modeset->mode != modeset->crtc->desired_mode)
-			modeset->mode = modeset->crtc->desired_mode;
+		if (modeset->crtc->desired_mode) {
+			if (modeset->mode)
+				drm_mode_destroy(dev, modeset->mode);
+			modeset->mode = drm_mode_duplicate(dev,
+							   modeset->crtc->desired_mode);
+		}
 	}
 	par->crtc_count = crtc_count;
 
@@ -857,14 +865,20 @@ void intelfb_restore(void)
 	drm_crtc_helper_set_config(&kernelfb_mode);
 }
 
+static void intelfb_restore_work_fn(struct work_struct *ignored)
+{
+	intelfb_restore();
+}
+static DECLARE_WORK(intelfb_restore_work, intelfb_restore_work_fn);
+
 static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
 {
-        intelfb_restore();
+        schedule_work(&intelfb_restore_work);
 }
 
 static struct sysrq_key_op sysrq_intelfb_restore_op = {
         .handler = intelfb_sysrq,
-        .help_msg = "force-fb(G)",
+        .help_msg = "force-fb(V)",
         .action_msg = "Restore framebuffer console",
 };
 
@@ -898,7 +912,7 @@ int intelfb_probe(struct drm_device *dev)
 		ret = intelfb_single_fb_probe(dev);
 	}
 
-	register_sysrq_key('g', &sysrq_intelfb_restore_op);
+	register_sysrq_key('v', &sysrq_intelfb_restore_op);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 55037422538..4ea2a651b92 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -56,7 +56,8 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	sdvox = SDVO_ENCODING_HDMI |
 		SDVO_BORDER_ENABLE |
 		SDVO_VSYNC_ACTIVE_HIGH |
-		SDVO_HSYNC_ACTIVE_HIGH;
+		SDVO_HSYNC_ACTIVE_HIGH |
+		SDVO_NULL_PACKETS_DURING_VSYNC;
 
 	if (hdmi_priv->has_hdmi_sink)
 		sdvox |= SDVO_AUDIO_ENABLE;
@@ -145,6 +146,22 @@ intel_hdmi_sink_detect(struct drm_connector *connector)
 }
 
 static enum drm_connector_status
+igdng_hdmi_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+
+	/* FIXME hotplug detect */
+
+	hdmi_priv->has_hdmi_sink = false;
+	intel_hdmi_sink_detect(connector);
+	if (hdmi_priv->has_hdmi_sink)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static enum drm_connector_status
 intel_hdmi_detect(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
@@ -153,13 +170,23 @@ intel_hdmi_detect(struct drm_connector *connector)
 	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
 	u32 temp, bit;
 
+	if (IS_IGDNG(dev))
+		return igdng_hdmi_detect(connector);
+
 	temp = I915_READ(PORT_HOTPLUG_EN);
 
-	I915_WRITE(PORT_HOTPLUG_EN,
-		   temp |
-		   HDMIB_HOTPLUG_INT_EN |
-		   HDMIC_HOTPLUG_INT_EN |
-		   HDMID_HOTPLUG_INT_EN);
+	switch (hdmi_priv->sdvox_reg) {
+	case SDVOB:
+		temp |= HDMIB_HOTPLUG_INT_EN;
+		break;
+	case SDVOC:
+		temp |= HDMIC_HOTPLUG_INT_EN;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	I915_WRITE(PORT_HOTPLUG_EN, temp);
 
 	POSTING_READ(PORT_HOTPLUG_EN);
 
@@ -212,6 +239,7 @@ static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
 	.save = intel_hdmi_save,
 	.restore = intel_hdmi_restore,
 	.detect = intel_hdmi_detect,
@@ -261,8 +289,17 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 	/* Set up the DDC bus. */
 	if (sdvox_reg == SDVOB)
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
-	else
+	else if (sdvox_reg == SDVOC)
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+	else if (sdvox_reg == HDMIB)
+		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
+								"HDMIB");
+	else if (sdvox_reg == HDMIC)
+		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
+								"HDMIC");
+	else if (sdvox_reg == HDMID)
+		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
+								"HDMID");
 
 	if (!intel_output->ddc_bus)
 		goto err_connector;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 5ee9d4c2575..f7061f68d05 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -34,6 +34,21 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* When using bit bashing for I2C, this bit needs to be set to 1 */
+	if (!IS_IGD(dev))
+		return;
+	if (enable)
+		I915_WRITE(CG_2D_DIS,
+			I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE);
+	else
+		I915_WRITE(CG_2D_DIS,
+			I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+}
+
 /*
  * Intel GPIO access functions
  */
@@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 		goto out_free;
 
 	/* JJJ:  raise SCL and SDA? */
+	intel_i2c_quirk_set(dev, true);
 	set_data(chan, 1);
 	set_clock(chan, 1);
+	intel_i2c_quirk_set(dev, false);
 	udelay(20);
 
 	return chan;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6619f26e46a..f073ed8432e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -37,6 +37,8 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+#define I915_LVDS "i915_lvds"
+
 /**
  * Sets the backlight level.
  *
@@ -45,10 +47,15 @@
 static void intel_lvds_set_backlight(struct drm_device *dev, int level)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 blc_pwm_ctl;
+	u32 blc_pwm_ctl, reg;
+
+	if (IS_IGDNG(dev))
+		reg = BLC_PWM_CPU_CTL;
+	else
+		reg = BLC_PWM_CTL;
 
-	blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
-	I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
+	blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+	I915_WRITE(reg, (blc_pwm_ctl |
 				 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
 }
 
@@ -58,8 +65,14 @@ static void intel_lvds_set_backlight(struct drm_device *dev, int level)
 static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
 
-	return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
+	if (IS_IGDNG(dev))
+		reg = BLC_PWM_PCH_CTL2;
+	else
+		reg = BLC_PWM_CTL;
+
+	return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >>
 		BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
 }
 
@@ -69,23 +82,31 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
 static void intel_lvds_set_power(struct drm_device *dev, bool on)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp_status;
+	u32 pp_status, ctl_reg, status_reg;
+
+	if (IS_IGDNG(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		status_reg = PCH_PP_STATUS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		status_reg = PP_STATUS;
+	}
 
 	if (on) {
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+		I915_WRITE(ctl_reg, I915_READ(ctl_reg) |
 			   POWER_TARGET_ON);
 		do {
-			pp_status = I915_READ(PP_STATUS);
+			pp_status = I915_READ(status_reg);
 		} while ((pp_status & PP_ON) == 0);
 
 		intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
 	} else {
 		intel_lvds_set_backlight(dev, 0);
 
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
+		I915_WRITE(ctl_reg, I915_READ(ctl_reg) &
 			   ~POWER_TARGET_ON);
 		do {
-			pp_status = I915_READ(PP_STATUS);
+			pp_status = I915_READ(status_reg);
 		} while (pp_status & PP_ON);
 	}
 }
@@ -106,12 +127,28 @@ static void intel_lvds_save(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg;
+	u32 pwm_ctl_reg;
+
+	if (IS_IGDNG(dev)) {
+		pp_on_reg = PCH_PP_ON_DELAYS;
+		pp_off_reg = PCH_PP_OFF_DELAYS;
+		pp_ctl_reg = PCH_PP_CONTROL;
+		pp_div_reg = PCH_PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CPU_CTL;
+	} else {
+		pp_on_reg = PP_ON_DELAYS;
+		pp_off_reg = PP_OFF_DELAYS;
+		pp_ctl_reg = PP_CONTROL;
+		pp_div_reg = PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CTL;
+	}
 
-	dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
-	dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
-	dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
-	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
-	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->savePP_ON = I915_READ(pp_on_reg);
+	dev_priv->savePP_OFF = I915_READ(pp_off_reg);
+	dev_priv->savePP_CONTROL = I915_READ(pp_ctl_reg);
+	dev_priv->savePP_DIVISOR = I915_READ(pp_div_reg);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(pwm_ctl_reg);
 	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
 				       BACKLIGHT_DUTY_CYCLE_MASK);
 
@@ -127,12 +164,28 @@ static void intel_lvds_restore(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg;
+	u32 pwm_ctl_reg;
+
+	if (IS_IGDNG(dev)) {
+		pp_on_reg = PCH_PP_ON_DELAYS;
+		pp_off_reg = PCH_PP_OFF_DELAYS;
+		pp_ctl_reg = PCH_PP_CONTROL;
+		pp_div_reg = PCH_PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CPU_CTL;
+	} else {
+		pp_on_reg = PP_ON_DELAYS;
+		pp_off_reg = PP_OFF_DELAYS;
+		pp_ctl_reg = PP_CONTROL;
+		pp_div_reg = PP_DIVISOR;
+		pwm_ctl_reg = BLC_PWM_CTL;
+	}
 
-	I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
-	I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
-	I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
-	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
-	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+	I915_WRITE(pwm_ctl_reg, dev_priv->saveBLC_PWM_CTL);
+	I915_WRITE(pp_on_reg, dev_priv->savePP_ON);
+	I915_WRITE(pp_off_reg, dev_priv->savePP_OFF);
+	I915_WRITE(pp_div_reg, dev_priv->savePP_DIVISOR);
+	I915_WRITE(pp_ctl_reg, dev_priv->savePP_CONTROL);
 	if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
 		intel_lvds_set_power(dev, true);
 	else
@@ -216,8 +269,14 @@ static void intel_lvds_prepare(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg;
+
+	if (IS_IGDNG(dev))
+		reg = BLC_PWM_CPU_CTL;
+	else
+		reg = BLC_PWM_CTL;
 
-	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(reg);
 	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
 				       BACKLIGHT_DUTY_CYCLE_MASK);
 
@@ -251,6 +310,10 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
 	 * settings.
 	 */
 
+	/* No panel fitting yet, fixme */
+	if (IS_IGDNG(dev))
+		return;
+
 	/*
 	 * Enable automatic panel scaling so that non-native modes fill the
 	 * screen.  Should be enabled before the pipe is enabled, according to
@@ -343,11 +406,6 @@ static int intel_lvds_set_property(struct drm_connector *connector,
 				   struct drm_property *property,
 				   uint64_t value)
 {
-	struct drm_device *dev = connector->dev;
-
-	if (property == dev->mode_config.dpms_property && connector->encoder)
-		intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
 	return 0;
 }
 
@@ -366,6 +424,7 @@ static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs
 };
 
 static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
 	.save = intel_lvds_save,
 	.restore = intel_lvds_restore,
 	.detect = intel_lvds_detect,
@@ -384,7 +443,65 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
 	.destroy = intel_lvds_enc_destroy,
 };
 
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS(I915_LVDS,
+		      "Skipping LVDS initialization for %s\n", id->ident);
+	return 1;
+}
 
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id intel_no_lvds[] = {
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core 2 series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI IM-945GSE-A",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell Studio Hybrid",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Aopen i945GTt-VFA",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
 
 /**
  * intel_lvds_init - setup LVDS connectors on this device
@@ -402,16 +519,16 @@ void intel_lvds_init(struct drm_device *dev)
 	struct drm_display_mode *scan; /* *modes, *bios_mode; */
 	struct drm_crtc *crtc;
 	u32 lvds;
-	int pipe;
-
-	/* Blacklist machines that we know falsely report LVDS. */
-	/* FIXME: add a check for the Aopen Mini PC */
+	int pipe, gpio = GPIOC;
 
-	/* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
-	if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
-	   dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
-		DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+	/* Skip init on machines we know falsely report LVDS */
+	if (dmi_check_system(intel_no_lvds))
 		return;
+
+	if (IS_IGDNG(dev)) {
+		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
+			return;
+		gpio = PCH_GPIOC;
 	}
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
@@ -448,7 +565,7 @@ void intel_lvds_init(struct drm_device *dev)
 	 */
 
 	/* Set up the DDC bus. */
-	intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
+	intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C");
 	if (!intel_output->ddc_bus) {
 		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
 			   "failed.\n");
@@ -473,10 +590,10 @@ void intel_lvds_init(struct drm_device *dev)
 	}
 
 	/* Failed to get EDID, what about VBT? */
-	if (dev_priv->vbt_mode) {
+	if (dev_priv->lfp_lvds_vbt_mode) {
 		mutex_lock(&dev->mode_config.mutex);
 		dev_priv->panel_fixed_mode =
-			drm_mode_duplicate(dev, dev_priv->vbt_mode);
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
 		mutex_unlock(&dev->mode_config.mutex);
 		if (dev_priv->panel_fixed_mode) {
 			dev_priv->panel_fixed_mode->type |=
@@ -490,6 +607,11 @@ void intel_lvds_init(struct drm_device *dev)
 	 * on.  If so, assume that whatever is currently programmed is the
 	 * correct mode.
 	 */
+
+	/* IGDNG: FIXME if still fail, not try pipe mode now */
+	if (IS_IGDNG(dev))
+		goto failed;
+
 	lvds = I915_READ(LVDS);
 	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
 	crtc = intel_get_crtc_from_pipe(dev, pipe);
@@ -508,11 +630,22 @@ void intel_lvds_init(struct drm_device *dev)
 		goto failed;
 
 out:
+	if (IS_IGDNG(dev)) {
+		u32 pwm;
+		/* make sure PWM is enabled */
+		pwm = I915_READ(BLC_PWM_CPU_CTL2);
+		pwm |= (PWM_ENABLE | PWM_PIPE_B);
+		I915_WRITE(BLC_PWM_CPU_CTL2, pwm);
+
+		pwm = I915_READ(BLC_PWM_PCH_CTL1);
+		pwm |= PWM_PCH_ENABLE;
+		I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
+	}
 	drm_sysfs_connector_add(connector);
 	return;
 
 failed:
-	DRM_DEBUG("No LVDS modes found, disabling.\n");
+	DRM_DEBUG_KMS(I915_LVDS, "No LVDS modes found, disabling.\n");
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 	drm_connector_cleanup(connector);
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 07d7ec97616..e0910fefce8 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -27,6 +27,7 @@
 #include <linux/fb.h>
 #include "drmP.h"
 #include "intel_drv.h"
+#include "i915_drv.h"
 
 /**
  * intel_ddc_probe
@@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output)
 		}
 	};
 
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
 	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+
 	if (ret == 2)
 		return true;
 
@@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output)
 	struct edid *edid;
 	int ret = 0;
 
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
 	edid = drm_get_edid(&intel_output->base,
 			    &intel_output->ddc_bus->adapter);
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&intel_output->base,
 							edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9913651c1e1..9a00adb3a50 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -36,7 +36,7 @@
 #include "intel_sdvo_regs.h"
 
 #undef SDVO_DEBUG
-
+#define I915_SDVO	"i915_sdvo"
 struct intel_sdvo_priv {
 	struct intel_i2c_chan *i2c_bus;
 	int slaveaddr;
@@ -69,6 +69,10 @@ struct intel_sdvo_priv {
 	 * This is set if we treat the device as HDMI, instead of DVI.
 	 */
 	bool is_hdmi;
+	/**
+	 * This is set if we detect output of sdvo device as LVDS.
+	 */
+	bool is_lvds;
 
 	/**
 	 * Returned SDTV resolutions allowed for the current format, if the
@@ -273,20 +277,21 @@ static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd,
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	int i;
 
-	printk(KERN_DEBUG "%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd);
+	DRM_DEBUG_KMS(I915_SDVO, "%s: W: %02X ",
+				SDVO_NAME(sdvo_priv), cmd);
 	for (i = 0; i < args_len; i++)
-		printk(KERN_DEBUG "%02X ", ((u8 *)args)[i]);
+		DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
 	for (; i < 8; i++)
-		printk(KERN_DEBUG "   ");
+		DRM_LOG_KMS("   ");
 	for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) {
 		if (cmd == sdvo_cmd_names[i].cmd) {
-			printk(KERN_DEBUG "(%s)", sdvo_cmd_names[i].name);
+			DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name);
 			break;
 		}
 	}
 	if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0]))
-		printk(KERN_DEBUG "(%02X)", cmd);
-	printk(KERN_DEBUG "\n");
+		DRM_LOG_KMS("(%02X)", cmd);
+	DRM_LOG_KMS("\n");
 }
 #else
 #define intel_sdvo_debug_write(o, c, a, l)
@@ -325,16 +330,16 @@ static void intel_sdvo_debug_response(struct intel_output *intel_output,
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	int i;
 
-	printk(KERN_DEBUG "%s: R: ", SDVO_NAME(sdvo_priv));
+	DRM_DEBUG_KMS(I915_SDVO, "%s: R: ", SDVO_NAME(sdvo_priv));
 	for (i = 0; i < response_len; i++)
-		printk(KERN_DEBUG "%02X ", ((u8 *)response)[i]);
+		DRM_LOG_KMS("%02X ", ((u8 *)response)[i]);
 	for (; i < 8; i++)
-		printk(KERN_DEBUG "   ");
+		DRM_LOG_KMS("   ");
 	if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
-		printk(KERN_DEBUG "(%s)", cmd_status_names[status]);
+		DRM_LOG_KMS("(%s)", cmd_status_names[status]);
 	else
-		printk(KERN_DEBUG "(??? %d)", status);
-	printk(KERN_DEBUG "\n");
+		DRM_LOG_KMS("(??? %d)", status);
+	DRM_LOG_KMS("\n");
 }
 #else
 #define intel_sdvo_debug_response(o, r, l, s)
@@ -1398,10 +1403,8 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect
 static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 
 	/* set the bus switch and get the modes */
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	intel_ddc_get_modes(intel_output);
 
 #if 0
@@ -1543,6 +1546,37 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
 		}
 }
 
+static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+
+	/*
+	 * Attempt to get the mode list from DDC.
+	 * Assume that the preferred modes are
+	 * arranged in priority order.
+	 */
+	/* set the bus switch and get the modes */
+	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+	intel_ddc_get_modes(intel_output);
+	if (list_empty(&connector->probed_modes) == false)
+		return;
+
+	/* Fetch modes from VBT */
+	if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
+		struct drm_display_mode *newmode;
+		newmode = drm_mode_duplicate(connector->dev,
+					     dev_priv->sdvo_lvds_vbt_mode);
+		if (newmode != NULL) {
+			/* Guarantee the mode is preferred */
+			newmode->type = (DRM_MODE_TYPE_PREFERRED |
+					 DRM_MODE_TYPE_DRIVER);
+			drm_mode_probed_add(connector, newmode);
+		}
+	}
+}
+
 static int intel_sdvo_get_modes(struct drm_connector *connector)
 {
 	struct intel_output *output = to_intel_output(connector);
@@ -1550,6 +1584,8 @@ static int intel_sdvo_get_modes(struct drm_connector *connector)
 
 	if (sdvo_priv->is_tv)
 		intel_sdvo_get_tv_modes(connector);
+	else if (sdvo_priv->is_lvds == true)
+		intel_sdvo_get_lvds_modes(connector);
 	else
 		intel_sdvo_get_ddc_modes(connector);
 
@@ -1564,6 +1600,9 @@ static void intel_sdvo_destroy(struct drm_connector *connector)
 
 	if (intel_output->i2c_bus)
 		intel_i2c_destroy(intel_output->i2c_bus);
+	if (intel_output->ddc_bus)
+		intel_i2c_destroy(intel_output->ddc_bus);
+
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
 	kfree(intel_output);
@@ -1578,6 +1617,7 @@ static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
 	.save = intel_sdvo_save,
 	.restore = intel_sdvo_restore,
 	.detect = intel_sdvo_detect,
@@ -1660,33 +1700,107 @@ intel_sdvo_get_digital_encoding_mode(struct intel_output *output)
 	return true;
 }
 
+static struct intel_output *
+intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan)
+{
+	struct drm_device *dev = chan->drm_dev;
+	struct drm_connector *connector;
+	struct intel_output *intel_output = NULL;
+
+	list_for_each_entry(connector,
+			&dev->mode_config.connector_list, head) {
+		if (to_intel_output(connector)->ddc_bus == chan) {
+			intel_output = to_intel_output(connector);
+			break;
+		}
+	}
+	return intel_output;
+}
+
+static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
+				  struct i2c_msg msgs[], int num)
+{
+	struct intel_output *intel_output;
+	struct intel_sdvo_priv *sdvo_priv;
+	struct i2c_algo_bit_data *algo_data;
+	struct i2c_algorithm *algo;
+
+	algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
+	intel_output =
+		intel_sdvo_chan_to_intel_output(
+				(struct intel_i2c_chan *)(algo_data->data));
+	if (intel_output == NULL)
+		return -EINVAL;
+
+	sdvo_priv = intel_output->dev_priv;
+	algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+
+	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+	return algo->master_xfer(i2c_adap, msgs, num);
+}
+
+static struct i2c_algorithm intel_sdvo_i2c_bit_algo = {
+	.master_xfer	= intel_sdvo_master_xfer,
+};
+
+static u8
+intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct sdvo_device_mapping *my_mapping, *other_mapping;
+
+	if (output_device == SDVOB) {
+		my_mapping = &dev_priv->sdvo_mappings[0];
+		other_mapping = &dev_priv->sdvo_mappings[1];
+	} else {
+		my_mapping = &dev_priv->sdvo_mappings[1];
+		other_mapping = &dev_priv->sdvo_mappings[0];
+	}
+
+	/* If the BIOS described our SDVO device, take advantage of it. */
+	if (my_mapping->slave_addr)
+		return my_mapping->slave_addr;
+
+	/* If the BIOS only described a different SDVO device, use the
+	 * address that it isn't using.
+	 */
+	if (other_mapping->slave_addr) {
+		if (other_mapping->slave_addr == 0x70)
+			return 0x72;
+		else
+			return 0x70;
+	}
+
+	/* No SDVO device info is found for another DVO port,
+	 * so use mapping assumption we had before BIOS parsing.
+	 */
+	if (output_device == SDVOB)
+		return 0x70;
+	else
+		return 0x72;
+}
+
 bool intel_sdvo_init(struct drm_device *dev, int output_device)
 {
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
 	struct intel_i2c_chan *i2cbus = NULL;
+	struct intel_i2c_chan *ddcbus = NULL;
 	int connector_type;
 	u8 ch[0x40];
 	int i;
 	int encoder_type, output_id;
+	u8 slave_addr;
 
 	intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
 	if (!intel_output) {
 		return false;
 	}
 
-	connector = &intel_output->base;
-
-	drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
-			   DRM_MODE_CONNECTOR_Unknown);
-	drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
 	sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
 	intel_output->type = INTEL_OUTPUT_SDVO;
 
-	connector->interlace_allowed = 0;
-	connector->doublescan_allowed = 0;
-
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
 		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
@@ -1694,32 +1808,47 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
 
 	if (!i2cbus)
-		goto err_connector;
+		goto err_inteloutput;
 
+	slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
 	sdvo_priv->i2c_bus = i2cbus;
 
 	if (output_device == SDVOB) {
 		output_id = 1;
-		sdvo_priv->i2c_bus->slave_addr = 0x38;
 	} else {
 		output_id = 2;
-		sdvo_priv->i2c_bus->slave_addr = 0x39;
 	}
-
+	sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
 	sdvo_priv->output_device = output_device;
 	intel_output->i2c_bus = i2cbus;
 	intel_output->dev_priv = sdvo_priv;
 
-
 	/* Read the regs to test if we can talk to the device */
 	for (i = 0; i < 0x40; i++) {
 		if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
-			DRM_DEBUG("No SDVO device found on SDVO%c\n",
-				  output_device == SDVOB ? 'B' : 'C');
+			DRM_DEBUG_KMS(I915_SDVO,
+					"No SDVO device found on SDVO%c\n",
+					output_device == SDVOB ? 'B' : 'C');
 			goto err_i2c;
 		}
 	}
 
+	/* setup the DDC bus. */
+	if (output_device == SDVOB)
+		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+	else
+		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+
+	if (ddcbus == NULL)
+		goto err_i2c;
+
+	intel_sdvo_i2c_bit_algo.functionality =
+		intel_output->i2c_bus->adapter.algo->functionality;
+	ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
+	intel_output->ddc_bus = ddcbus;
+
+	/* In defaut case sdvo lvds is false */
+	sdvo_priv->is_lvds = false;
 	intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
 
 	if (sdvo_priv->caps.output_flags &
@@ -1729,7 +1858,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 		else
 			sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
 
-		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 		encoder_type = DRM_MODE_ENCODER_TMDS;
 		connector_type = DRM_MODE_CONNECTOR_DVID;
 
@@ -1747,7 +1875,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
 	{
 		sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
-		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 		encoder_type = DRM_MODE_ENCODER_TVDAC;
 		connector_type = DRM_MODE_CONNECTOR_SVIDEO;
 		sdvo_priv->is_tv = true;
@@ -1756,30 +1883,28 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
 	{
 		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
-		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 		encoder_type = DRM_MODE_ENCODER_DAC;
 		connector_type = DRM_MODE_CONNECTOR_VGA;
 	}
 	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
 	{
 		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
-		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 		encoder_type = DRM_MODE_ENCODER_DAC;
 		connector_type = DRM_MODE_CONNECTOR_VGA;
 	}
 	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
 	{
 		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
-		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 		encoder_type = DRM_MODE_ENCODER_LVDS;
 		connector_type = DRM_MODE_CONNECTOR_LVDS;
+		sdvo_priv->is_lvds = true;
 	}
 	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
 	{
 		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
-		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 		encoder_type = DRM_MODE_ENCODER_LVDS;
 		connector_type = DRM_MODE_CONNECTOR_LVDS;
+		sdvo_priv->is_lvds = true;
 	}
 	else
 	{
@@ -1787,17 +1912,25 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 
 		sdvo_priv->controlled_output = 0;
 		memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
-		DRM_DEBUG("%s: Unknown SDVO output type (0x%02x%02x)\n",
-			  SDVO_NAME(sdvo_priv),
-			  bytes[0], bytes[1]);
+		DRM_DEBUG_KMS(I915_SDVO,
+				"%s: Unknown SDVO output type (0x%02x%02x)\n",
+				  SDVO_NAME(sdvo_priv),
+				  bytes[0], bytes[1]);
 		encoder_type = DRM_MODE_ENCODER_NONE;
 		connector_type = DRM_MODE_CONNECTOR_Unknown;
 		goto err_i2c;
 	}
 
+	connector = &intel_output->base;
+	drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
+			   connector_type);
+	drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+
 	drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
 	drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
-	connector->connector_type = connector_type;
 
 	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
 	drm_sysfs_connector_add(connector);
@@ -1812,31 +1945,30 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
 					       &sdvo_priv->pixel_clock_max);
 
 
-	DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, "
-		  "clock range %dMHz - %dMHz, "
-		  "input 1: %c, input 2: %c, "
-		  "output 1: %c, output 2: %c\n",
-		  SDVO_NAME(sdvo_priv),
-		  sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
-		  sdvo_priv->caps.device_rev_id,
-		  sdvo_priv->pixel_clock_min / 1000,
-		  sdvo_priv->pixel_clock_max / 1000,
-		  (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
-		  (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
-		  /* check currently supported outputs */
-		  sdvo_priv->caps.output_flags &
+	DRM_DEBUG_KMS(I915_SDVO, "%s device VID/DID: %02X:%02X.%02X, "
+			"clock range %dMHz - %dMHz, "
+			"input 1: %c, input 2: %c, "
+			"output 1: %c, output 2: %c\n",
+			SDVO_NAME(sdvo_priv),
+			sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
+			sdvo_priv->caps.device_rev_id,
+			sdvo_priv->pixel_clock_min / 1000,
+			sdvo_priv->pixel_clock_max / 1000,
+			(sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
+			(sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
+			/* check currently supported outputs */
+			sdvo_priv->caps.output_flags &
 			(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
-		  sdvo_priv->caps.output_flags &
+			sdvo_priv->caps.output_flags &
 			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
 
-	intel_output->ddc_bus = i2cbus;
-
 	return true;
 
 err_i2c:
+	if (ddcbus != NULL)
+		intel_i2c_destroy(intel_output->ddc_bus);
 	intel_i2c_destroy(intel_output->i2c_bus);
-err_connector:
-	drm_connector_cleanup(connector);
+err_inteloutput:
 	kfree(intel_output);
 
 	return false;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index d2c32983242..50d7ed70b33 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1392,6 +1392,9 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output)
 		tv_ctl &= ~TV_TEST_MODE_MASK;
 		tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
 		tv_dac &= ~TVDAC_SENSE_MASK;
+		tv_dac &= ~DAC_A_MASK;
+		tv_dac &= ~DAC_B_MASK;
+		tv_dac &= ~DAC_C_MASK;
 		tv_dac |= (TVDAC_STATE_CHG_EN |
 			   TVDAC_A_SENSE_CTL |
 			   TVDAC_B_SENSE_CTL |
@@ -1626,6 +1629,7 @@ static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_tv_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
 	.save = intel_tv_save,
 	.restore = intel_tv_restore,
 	.detect = intel_tv_detect,
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index bc9d09dfa8e..146f3570af8 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -478,26 +478,27 @@ static void r700_cp_load_microcode(drm_radeon_private_t *dev_priv)
 
 	if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV770)) {
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
-		DRM_INFO("Loading RV770 PFP Microcode\n");
+		DRM_INFO("Loading RV770/RV790 PFP Microcode\n");
 		for (i = 0; i < R700_PFP_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV770_pfp_microcode[i]);
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
 
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
-		DRM_INFO("Loading RV770 CP Microcode\n");
+		DRM_INFO("Loading RV770/RV790 CP Microcode\n");
 		for (i = 0; i < R700_PM4_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_ME_RAM_DATA, RV770_cp_microcode[i]);
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
 
-	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV730)) {
+	} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV730) ||
+		   ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740)) {
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
-		DRM_INFO("Loading RV730 PFP Microcode\n");
+		DRM_INFO("Loading RV730/RV740 PFP Microcode\n");
 		for (i = 0; i < R700_PFP_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV730_pfp_microcode[i]);
 		RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
 
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
-		DRM_INFO("Loading RV730 CP Microcode\n");
+		DRM_INFO("Loading RV730/RV740 CP Microcode\n");
 		for (i = 0; i < R700_PM4_UCODE_SIZE; i++)
 			RADEON_WRITE(R600_CP_ME_RAM_DATA, RV730_cp_microcode[i]);
 		RADEON_WRITE(R600_CP_ME_RAM_WADDR, 0);
@@ -1324,6 +1325,10 @@ static void r700_gfx_init(struct drm_device *dev,
 		dev_priv->r700_sc_prim_fifo_size = 0xf9;
 		dev_priv->r700_sc_hiz_tile_fifo_size = 0x30;
 		dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130;
+		if (dev_priv->r600_sx_max_export_pos_size > 16) {
+			dev_priv->r600_sx_max_export_pos_size -= 16;
+			dev_priv->r600_sx_max_export_smx_size += 16;
+		}
 		break;
 	case CHIP_RV710:
 		dev_priv->r600_max_pipes = 2;
@@ -1345,6 +1350,31 @@ static void r700_gfx_init(struct drm_device *dev,
 		dev_priv->r700_sc_hiz_tile_fifo_size = 0x30;
 		dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130;
 		break;
+	case CHIP_RV740:
+		dev_priv->r600_max_pipes = 4;
+		dev_priv->r600_max_tile_pipes = 4;
+		dev_priv->r600_max_simds = 8;
+		dev_priv->r600_max_backends = 4;
+		dev_priv->r600_max_gprs = 256;
+		dev_priv->r600_max_threads = 248;
+		dev_priv->r600_max_stack_entries = 512;
+		dev_priv->r600_max_hw_contexts = 8;
+		dev_priv->r600_max_gs_threads = 16 * 2;
+		dev_priv->r600_sx_max_export_size = 256;
+		dev_priv->r600_sx_max_export_pos_size = 32;
+		dev_priv->r600_sx_max_export_smx_size = 224;
+		dev_priv->r600_sq_num_cf_insts = 2;
+
+		dev_priv->r700_sx_num_of_sets = 7;
+		dev_priv->r700_sc_prim_fifo_size = 0x100;
+		dev_priv->r700_sc_hiz_tile_fifo_size = 0x30;
+		dev_priv->r700_sc_earlyz_tile_fifo_fize = 0x130;
+
+		if (dev_priv->r600_sx_max_export_pos_size > 16) {
+			dev_priv->r600_sx_max_export_pos_size -= 16;
+			dev_priv->r600_sx_max_export_smx_size += 16;
+		}
+		break;
 	default:
 		break;
 	}
@@ -1493,6 +1523,7 @@ static void r700_gfx_init(struct drm_device *dev,
 		break;
 	case CHIP_RV730:
 	case CHIP_RV710:
+	case CHIP_RV740:
 	default:
 		sq_ms_fifo_sizes |= R600_FETCH_FIFO_HIWATER(0x4);
 		break;
@@ -1569,6 +1600,7 @@ static void r700_gfx_init(struct drm_device *dev,
 	switch (dev_priv->flags & RADEON_FAMILY_MASK) {
 	case CHIP_RV770:
 	case CHIP_RV730:
+	case CHIP_RV740:
 		gs_prim_buffer_depth = 384;
 		break;
 	case CHIP_RV710:
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 77a7a4d8465..89c4c44169f 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -2109,7 +2109,7 @@ int radeon_master_create(struct drm_device *dev, struct drm_master *master)
 
 	/* prebuild the SAREA */
 	sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
-	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK|_DRM_DRIVER,
+	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM, _DRM_CONTAINS_LOCK,
 			 &master_priv->sarea);
 	if (ret) {
 		DRM_ERROR("SAREA setup failed\n");
@@ -2185,9 +2185,9 @@ void radeon_commit_ring(drm_radeon_private_t *dev_priv)
 
 	/* check if the ring is padded out to 16-dword alignment */
 
-	tail_aligned = dev_priv->ring.tail & 0xf;
+	tail_aligned = dev_priv->ring.tail & (RADEON_RING_ALIGN-1);
 	if (tail_aligned) {
-		int num_p2 = 16 - tail_aligned;
+		int num_p2 = RADEON_RING_ALIGN - tail_aligned;
 
 		ring = dev_priv->ring.start;
 		/* pad with some CP_PACKET2 */
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 8071d965f14..127d0456f62 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -146,6 +146,7 @@ enum radeon_family {
 	CHIP_RV770,
 	CHIP_RV730,
 	CHIP_RV710,
+	CHIP_RV740,
 	CHIP_LAST,
 };
 
@@ -1964,11 +1965,14 @@ do {								\
 
 #define RING_LOCALS	int write, _nr, _align_nr; unsigned int mask; u32 *ring;
 
+#define RADEON_RING_ALIGN 16
+
 #define BEGIN_RING( n ) do {						\
 	if ( RADEON_VERBOSE ) {						\
 		DRM_INFO( "BEGIN_RING( %d )\n", (n));			\
 	}								\
-	_align_nr = (n + 0xf) & ~0xf;					\
+	_align_nr = RADEON_RING_ALIGN - ((dev_priv->ring.tail + n) & (RADEON_RING_ALIGN-1));	\
+	_align_nr += n;							\
 	if (dev_priv->ring.space <= (_align_nr * sizeof(u32))) {	\
                 COMMIT_RING();						\
 		radeon_wait_ring( dev_priv, _align_nr * sizeof(u32));	\
diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
index 409e00afdd0..327380888b4 100644
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ b/drivers/gpu/drm/via/via_dmablit.c
@@ -195,10 +195,8 @@ via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 	default:
 		vsg->state = dr_via_sg_init;
 	}
-	if (vsg->bounce_buffer) {
-		vfree(vsg->bounce_buffer);
-		vsg->bounce_buffer = NULL;
-	}
+	vfree(vsg->bounce_buffer);
+	vsg->bounce_buffer = NULL;
 	vsg->free_on_sequence = 0;
 }
 
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7e67dcb3d4f..7831a0318d3 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -116,9 +116,16 @@ config HID_CYPRESS
 	---help---
 	Support for cypress mouse and barcode readers.
 
-config DRAGONRISE_FF
-	tristate "DragonRise Inc. force feedback support"
+config HID_DRAGONRISE
+	tristate "DragonRise Inc. support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Say Y here if you have DragonRise Inc.game controllers.
+
+config DRAGONRISE_FF
+	bool "DragonRise Inc. force feedback support"
+	depends on HID_DRAGONRISE
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you want to enable force feedback support for DragonRise Inc.
@@ -160,7 +167,7 @@ config HID_LOGITECH
 	Support for Logitech devices that are not fully compliant with HID standard.
 
 config LOGITECH_FF
-	bool "Logitech force feedback"
+	bool "Logitech force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -176,7 +183,7 @@ config LOGITECH_FF
 	  force feedback.
 
 config LOGIRUMBLEPAD2_FF
-	bool "Logitech Rumblepad 2 force feedback"
+	bool "Logitech Rumblepad 2 force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -211,11 +218,19 @@ config HID_PANTHERLORD
 	---help---
 	Support for PantherLord/GreenAsia based device support.
 
+config HID_PANTHERLORD
+	tristate "Pantherlord support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a PantherLord/GreenAsia based game controller
+	  or adapter.
+
 config PANTHERLORD_FF
 	bool "Pantherlord force feedback support"
 	depends on HID_PANTHERLORD
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a PantherLord/GreenAsia based game controller
 	  or adapter and want to enable force feedback support for it.
 
@@ -247,15 +262,38 @@ config HID_SUNPLUS
 	---help---
 	Support for Sunplus wireless desktop.
 
-config GREENASIA_FF
-	tristate "GreenAsia (Product ID 0x12) force feedback support"
+config HID_GREENASIA
+	tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a GreenAsia (Product ID 0x12) based game
+	  controller or adapter.
+
+config GREENASIA_FF
+	bool "GreenAsia (Product ID 0x12) force feedback support"
+	depends on HID_GREENASIA
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
 	(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 	and want to enable force feedback support for it.
 
+config HID_SMARTJOYPLUS
+	tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for SmartJoy PLUS PS2/USB adapter.
+
+config SMARTJOYPLUS_FF
+	bool "SmartJoy PLUS PS2/USB adapter force feedback support"
+	depends on HID_SMARTJOYPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+	enable force feedback support for it.
+
 config HID_TOPSEED
 	tristate "TopSeed Cyberlink remote control support" if EMBEDDED
 	depends on USB_HID
@@ -263,21 +301,45 @@ config HID_TOPSEED
 	---help---
 	Say Y if you have a TopSeed Cyberlink remote control.
 
-config THRUSTMASTER_FF
-	tristate "ThrustMaster devices support"
+config HID_THRUSTMASTER
+	tristate "ThrustMaster devices support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
+	  a THRUSTMASTER Ferrari GT Rumble Wheel.
+
+config THRUSTMASTER_FF
+	bool "ThrustMaster devices force feedback support"
+	depends on HID_THRUSTMASTER
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
-	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
+	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel and
+	  want to enable force feedback support for it.
 
-config ZEROPLUS_FF
-	tristate "Zeroplus based game controller support"
+config HID_WACOM
+	tristate "Wacom Bluetooth devices support" if EMBEDDED
+	depends on BT_HIDP
+	default !EMBEDDED
+	---help---
+	Support for Wacom Graphire Bluetooth tablet.
+
+config HID_ZEROPLUS
+	tristate "Zeroplus based game controller support" if EMBEDDED
 	depends on USB_HID
-	select INPUT_FF_MEMLESS
-	help
+	default !EMBEDDED
+	---help---
 	  Say Y here if you have a Zeroplus based game controller.
 
+config ZEROPLUS_FF
+	bool "Zeroplus based game controller force feedback support"
+	depends on HID_ZEROPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	  Say Y here if you have a Zeroplus based game controller and want
+	  to have force feedback support for it.
+
 endmenu
 
 endif # HID_SUPPORT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 1f7cb0fd450..db35151673b 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
-obj-$(CONFIG_DRAGONRISE_FF)	+= hid-drff.o
+obj-$(CONFIG_HID_DRAGONRISE)	+= hid-drff.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
@@ -34,12 +34,14 @@ obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
+obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
-obj-$(CONFIG_GREENASIA_FF)	+= hid-gaff.o
-obj-$(CONFIG_THRUSTMASTER_FF)	+= hid-tmff.o
+obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
+obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
-obj-$(CONFIG_ZEROPLUS_FF)	+= hid-zpff.o
+obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
+obj-$(CONFIG_HID_WACOM)		+= hid-wacom.o
 
 obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index acbce5745b0..303ccce05bb 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -436,10 +436,6 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 
-	/* Apple wireless Mighty Mouse */
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c),
-		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
-
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, apple_devices);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8551693d645..f2c21d5d24e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1312,6 +1312,8 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 47ac1a7d66e..04359ed64b8 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -137,6 +137,14 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x44, "BarrelSwitch"},
     {0, 0x45, "Eraser"},
     {0, 0x46, "TabletPick"},
+    {0, 0x47, "Confidence"},
+    {0, 0x48, "Width"},
+    {0, 0x49, "Height"},
+    {0, 0x51, "ContactID"},
+    {0, 0x52, "InputMode"},
+    {0, 0x53, "DeviceIndex"},
+    {0, 0x54, "ContactCount"},
+    {0, 0x55, "ContactMaximumNumber"},
   { 15, 0, "PhysicalInterfaceDevice" },
     {0, 0x00, "Undefined"},
     {0, 0x01, "Physical_Interface_Device"},
@@ -514,9 +522,11 @@ static const char *events[EV_MAX + 1] = {
 	[EV_FF_STATUS] = "ForceFeedbackStatus",
 };
 
-static const char *syncs[2] = {
+static const char *syncs[3] = {
 	[SYN_REPORT] = "Report",		[SYN_CONFIG] = "Config",
+	[SYN_MT_REPORT] = "MT Report",
 };
+
 static const char *keys[KEY_MAX + 1] = {
 	[KEY_RESERVED] = "Reserved",		[KEY_ESC] = "Esc",
 	[KEY_1] = "1",				[KEY_2] = "2",
@@ -734,8 +744,17 @@ static const char *absolutes[ABS_MAX + 1] = {
 	[ABS_HAT2Y] = "Hat2Y",		[ABS_HAT3X] = "Hat3X",
 	[ABS_HAT3Y] = "Hat 3Y",		[ABS_PRESSURE] = "Pressure",
 	[ABS_DISTANCE] = "Distance",	[ABS_TILT_X] = "XTilt",
-	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "Tool Width",
+	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "ToolWidth",
 	[ABS_VOLUME] = "Volume",	[ABS_MISC] = "Misc",
+	[ABS_MT_TOUCH_MAJOR] = "MTMajor",
+	[ABS_MT_TOUCH_MINOR] = "MTMinor",
+	[ABS_MT_WIDTH_MAJOR] = "MTMajorW",
+	[ABS_MT_WIDTH_MINOR] = "MTMinorW",
+	[ABS_MT_ORIENTATION] = "MTOrientation",
+	[ABS_MT_POSITION_X] = "MTPositionX",
+	[ABS_MT_POSITION_Y] = "MTPositionY",
+	[ABS_MT_TOOL_TYPE] = "MTToolType",
+	[ABS_MT_BLOB_ID] = "MTBlobID",
 };
 
 static const char *misc[MSC_MAX + 1] = {
diff --git a/drivers/hid/hid-drff.c b/drivers/hid/hid-drff.c
index 34f3eb65100..a239d20ad7a 100644
--- a/drivers/hid/hid-drff.c
+++ b/drivers/hid/hid-drff.c
@@ -32,6 +32,8 @@
 #include <linux/hid.h>
 
 #include "hid-ids.h"
+
+#ifdef CONFIG_DRAGONRISE_FF
 #include "usbhid/usbhid.h"
 
 struct drff_device {
@@ -135,6 +137,12 @@ static int drff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int drff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
index 510ad3ab8d3..8a11ccddaf2 100644
--- a/drivers/hid/hid-gaff.c
+++ b/drivers/hid/hid-gaff.c
@@ -31,6 +31,8 @@
 #include <linux/usb.h>
 #include <linux/hid.h>
 #include "hid-ids.h"
+
+#ifdef CONFIG_GREENASIA_FF
 #include "usbhid/usbhid.h"
 
 struct gaff_device {
@@ -130,6 +132,12 @@ static int gaff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int gaff_init(struct hid_device *hdev)
+{
+	return 0;
+}
+#endif
 
 static int ga_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4d5ee2bbc62..63010103792 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -414,8 +414,10 @@
 #define USB_DEVICE_ID_VERNIER_LCSPEC	0x0006
 
 #define USB_VENDOR_ID_WACOM		0x056a
+#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH	0x81
 
 #define USB_VENDOR_ID_WISEGROUP		0x0925
+#define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
 #define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_8_8_4_IF_KIT	0x8201
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 51aff08e10c..56099709581 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -50,6 +50,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+static const signed short ff_joystick_ac[] = {
+	FF_CONSTANT,
+	FF_AUTOCENTER,
+	-1
+};
+
 static const signed short ff_wheel[] = {
 	FF_CONSTANT,
 	FF_AUTOCENTER,
@@ -60,8 +66,8 @@ static const struct dev_type devices[] = {
 	{ 0x046d, 0xc211, ff_rumble },
 	{ 0x046d, 0xc219, ff_rumble },
 	{ 0x046d, 0xc283, ff_joystick },
-	{ 0x046d, 0xc286, ff_joystick },
-	{ 0x046d, 0xc294, ff_joystick },
+	{ 0x046d, 0xc286, ff_joystick_ac },
+	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },
 	{ 0x046d, 0xca03, ff_wheel },
 };
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index c5b252be9c2..75ed9d2c1a3 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -1,13 +1,8 @@
 /*
- *  HID driver for some ntrig "special" devices
+ *  HID driver for N-Trig touchscreens
  *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- *  Copyright (c) 2007 Paul Walmsley
- *  Copyright (c) 2008 Jiri Slaby
  *  Copyright (c) 2008 Rafi Rubin
+ *  Copyright (c) 2009 Stephane Chatty
  *
  */
 
@@ -29,15 +24,79 @@
 #define nt_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, max, \
 					EV_KEY, (c))
 
+struct ntrig_data {
+	__s32 x, y, id, w, h;
+	char reading_a_point, found_contact_id;
+};
+
+/*
+ * this driver is aimed at two firmware versions in circulation:
+ *  - dual pen/finger single touch
+ *  - finger multitouch, pen not working
+ */
+
 static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_DIGITIZER &&
-			(usage->hid & 0xff) == 0x47) {
-		nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-		return 1;
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			input_set_abs_params(hi->input, ABS_X,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			input_set_abs_params(hi->input, ABS_Y,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		/* we do not want to map these for now */
+		case HID_DG_INVERT: /* value is always 0 */
+		case HID_DG_ERASER: /* value is always 0 */
+		case HID_DG_CONTACTID: /* value is useless */
+		case HID_DG_BARRELSWITCH:  /* doubtful */
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+			return -1;
+
+		/* original mapping by Rafi Rubin */
+		case HID_DG_CONFIDENCE:
+			nt_map_key_clear(BTN_TOOL_DOUBLETAP);
+			return 1;
+
+		/* width/height mapped on TouchMajor/TouchMinor/Orientation */
+		case HID_DG_WIDTH:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MAJOR);
+			return 1;
+		case HID_DG_HEIGHT:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MINOR);
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+					0, 1, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case 0xff000000:
+		/* we do not want to map these: no input-oriented meaning */
+		return -1;
 	}
+
 	return 0;
 }
 
@@ -51,6 +110,138 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 
 	return 0;
 }
+
+/*
+ * this function is called upon all reports
+ * so that we can filter contact point information,
+ * decide whether we are in multi or single touch mode
+ * and call input_mt_sync after each point if necessary
+ */
+static int ntrig_event (struct hid_device *hid, struct hid_field *field,
+		                        struct hid_usage *usage, __s32 value)
+{
+	struct input_dev *input = field->hidinput->input;
+	struct ntrig_data *nd = hid_get_drvdata(hid);
+
+        if (hid->claimed & HID_CLAIMED_INPUT) {
+		switch (usage->hid) {
+		case HID_GD_X:
+			nd->x = value;
+			nd->reading_a_point = 1;
+			break;
+		case HID_GD_Y:
+			nd->y = value;
+			break;
+		case HID_DG_CONTACTID:
+			nd->id = value;
+			/* we receive this only when in multitouch mode */
+			nd->found_contact_id = 1;
+			break;
+		case HID_DG_WIDTH:
+			nd->w = value;
+			break;
+		case HID_DG_HEIGHT:
+			nd->h = value;
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a finger event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			break;
+		case HID_DG_TIPPRESSURE:
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a pen event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+				input_event(input, EV_ABS, ABS_PRESSURE, value);
+			}
+			break;
+		case 0xff000002:
+			/*
+			 * we receive this when the device is in multitouch
+			 * mode. The first of the three values tagged with
+			 * this usage tells if the contact point is real
+			 * or a placeholder
+			 */
+			if (!nd->reading_a_point || value != 1)
+				break;
+			/* emit a normal (X, Y) for the first point only */
+			if (nd->id == 0) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+			if (nd->w > nd->h) {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 1);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->w);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->h);
+			} else {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 0);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->h);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->w);
+			}
+			input_mt_sync(field->hidinput->input);
+			nd->reading_a_point = 0;
+			nd->found_contact_id = 0;
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+                hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct ntrig_data *nd;
+
+	nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
+	if (!nd) {
+		dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
+		return -ENOMEM;
+	}
+	nd->reading_a_point = 0;
+	nd->found_contact_id = 0;
+	hid_set_drvdata(hdev, nd);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree (nd);
+	return ret;
+}
+
+static void ntrig_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
 static const struct hid_device_id ntrig_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
 		.driver_data = NTRIG_DUPLICATE_USAGES },
@@ -58,11 +249,20 @@ static const struct hid_device_id ntrig_devices[] = {
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
 
+static const struct hid_usage_id ntrig_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
 static struct hid_driver ntrig_driver = {
 	.name = "ntrig",
 	.id_table = ntrig_devices,
+	.probe = ntrig_probe,
+	.remove = ntrig_remove,
 	.input_mapping = ntrig_input_mapping,
 	.input_mapped = ntrig_input_mapped,
+	.usage_table = ntrig_grabbed_usages,
+	.event = ntrig_event,
 };
 
 static int ntrig_init(void)
diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c
new file mode 100644
index 00000000000..eab169e5c37
--- /dev/null
+++ b/drivers/hid/hid-sjoy.c
@@ -0,0 +1,180 @@
+/*
+ *  Force feedback support for SmartJoy PLUS PS2->USB adapter
+ *
+ *  Copyright (c) 2009 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ *  Based of hid-pl.c and hid-gaff.c
+ *   Copyright (c) 2007, 2009 Anssi Hannula <anssi.hannula@gmail.com>
+ *   Copyright (c) 2008 Lukasz Lubojanski <lukasz@lubojanski.info>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "hid-ids.h"
+
+#ifdef CONFIG_SMARTJOYPLUS_FF
+#include "usbhid/usbhid.h"
+
+struct sjoyff_device {
+	struct hid_report *report;
+};
+
+static int hid_sjoyff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct sjoyff_device *sjoyff = data;
+	u32 left, right;
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+	dev_dbg(&dev->dev, "called with 0x%08x 0x%08x\n", left, right);
+
+	left = left * 0xff / 0xffff;
+	right = (right != 0); /* on/off only */
+
+	sjoyff->report->field[0]->value[1] = right;
+	sjoyff->report->field[0]->value[2] = left;
+	dev_dbg(&dev->dev, "running with 0x%02x 0x%02x\n", left, right);
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	return 0;
+}
+
+static int sjoyff_init(struct hid_device *hid)
+{
+	struct sjoyff_device *sjoyff;
+	struct hid_report *report;
+	struct hid_input *hidinput = list_entry(hid->inputs.next,
+						struct hid_input, list);
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct list_head *report_ptr = report_list;
+	struct input_dev *dev;
+	int error;
+
+	if (list_empty(report_list)) {
+		dev_err(&hid->dev, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report_ptr = report_ptr->next;
+
+	if (report_ptr == report_list) {
+		dev_err(&hid->dev, "required output report is "
+				"missing\n");
+		return -ENODEV;
+	}
+
+	report = list_entry(report_ptr, struct hid_report, list);
+	if (report->maxfield < 1) {
+		dev_err(&hid->dev, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 3) {
+		dev_err(&hid->dev, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	sjoyff = kzalloc(sizeof(struct sjoyff_device), GFP_KERNEL);
+	if (!sjoyff)
+		return -ENOMEM;
+
+	dev = hidinput->input;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, sjoyff, hid_sjoyff_play);
+	if (error) {
+		kfree(sjoyff);
+		return error;
+	}
+
+	sjoyff->report = report;
+	sjoyff->report->field[0]->value[0] = 0x01;
+	sjoyff->report->field[0]->value[1] = 0x00;
+	sjoyff->report->field[0]->value[2] = 0x00;
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	dev_info(&hid->dev,
+		"Force feedback for SmartJoy PLUS PS2/USB adapter\n");
+
+	return 0;
+}
+#else
+static inline int sjoyff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
+
+static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err;
+	}
+
+	sjoyff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id sjoy_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, sjoy_devices);
+
+static struct hid_driver sjoy_driver = {
+	.name = "smartjoyplus",
+	.id_table = sjoy_devices,
+	.probe = sjoy_probe,
+};
+
+static int sjoy_init(void)
+{
+	return hid_register_driver(&sjoy_driver);
+}
+
+static void sjoy_exit(void)
+{
+	hid_unregister_driver(&sjoy_driver);
+}
+
+module_init(sjoy_init);
+module_exit(sjoy_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jussi Kivilinna");
+
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 7c1f7b50330..fcd6ccd02fe 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -33,11 +33,6 @@
 
 #include "hid-ids.h"
 
-#include "usbhid/usbhid.h"
-
-/* Usages for thrustmaster devices I know about */
-#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
-
 static const signed short ff_rumble[] = {
 	FF_RUMBLE,
 	-1
@@ -48,6 +43,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+#ifdef CONFIG_THRUSTMASTER_FF
+#include "usbhid/usbhid.h"
+
+/* Usages for thrustmaster devices I know about */
+#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
+
 struct tmff_device {
 	struct hid_report *report;
 	struct hid_field *ff_field;
@@ -209,6 +210,12 @@ fail:
 	kfree(tmff);
 	return error;
 }
+#else
+static inline int tmff_init(struct hid_device *hid, const signed short *ff_bits)
+{
+	return 0;
+}
+#endif
 
 static int tm_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
new file mode 100644
index 00000000000..1f9237f511e
--- /dev/null
+++ b/drivers/hid/hid-wacom.c
@@ -0,0 +1,259 @@
+/*
+ *  Bluetooth Wacom Tablet support
+ *
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2007 Paul Walmsley
+ *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
+ *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
+ *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct wacom_data {
+	__u16 tool;
+	unsigned char butstate;
+};
+
+static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *raw_data, int size)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	unsigned char *data = (unsigned char *) raw_data;
+	int tool, x, y, rw;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		return 0;
+
+	tool = 0;
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Check if this is a tablet report */
+	if (data[0] != 0x03)
+		return 0;
+
+	/* Get X & Y positions */
+	x = le16_to_cpu(*(__le16 *) &data[2]);
+	y = le16_to_cpu(*(__le16 *) &data[4]);
+
+	/* Get current tool identifier */
+	if (data[1] & 0x90) { /* If pen is in the in/active area */
+		switch ((data[1] >> 5) & 3) {
+		case 0:	/* Pen */
+			tool = BTN_TOOL_PEN;
+			break;
+
+		case 1: /* Rubber */
+			tool = BTN_TOOL_RUBBER;
+			break;
+
+		case 2: /* Mouse with wheel */
+		case 3: /* Mouse without wheel */
+			tool = BTN_TOOL_MOUSE;
+			break;
+		}
+
+		/* Reset tool if out of active tablet area */
+		if (!(data[1] & 0x10))
+			tool = 0;
+	}
+
+	/* If tool changed, notify input subsystem */
+	if (wdata->tool != tool) {
+		if (wdata->tool) {
+			/* Completely reset old tool state */
+			if (wdata->tool == BTN_TOOL_MOUSE) {
+				input_report_key(input, BTN_LEFT, 0);
+				input_report_key(input, BTN_RIGHT, 0);
+				input_report_key(input, BTN_MIDDLE, 0);
+				input_report_abs(input, ABS_DISTANCE,
+						input->absmax[ABS_DISTANCE]);
+			} else {
+				input_report_key(input, BTN_TOUCH, 0);
+				input_report_key(input, BTN_STYLUS, 0);
+				input_report_key(input, BTN_STYLUS2, 0);
+				input_report_abs(input, ABS_PRESSURE, 0);
+			}
+			input_report_key(input, wdata->tool, 0);
+			input_sync(input);
+		}
+		wdata->tool = tool;
+		if (tool)
+			input_report_key(input, tool, 1);
+	}
+
+	if (tool) {
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+
+		switch ((data[1] >> 5) & 3) {
+		case 2: /* Mouse with wheel */
+			input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
+			rw = (data[6] & 0x01) ? -1 :
+				(data[6] & 0x02) ? 1 : 0;
+			input_report_rel(input, REL_WHEEL, rw);
+			/* fall through */
+
+		case 3: /* Mouse without wheel */
+			input_report_key(input, BTN_LEFT, data[1] & 0x01);
+			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
+			/* Compute distance between mouse and tablet */
+			rw = 44 - (data[6] >> 2);
+			if (rw < 0)
+				rw = 0;
+			else if (rw > 31)
+				rw = 31;
+			input_report_abs(input, ABS_DISTANCE, rw);
+			break;
+
+		default:
+			input_report_abs(input, ABS_PRESSURE,
+					data[6] | (((__u16) (data[1] & 0x08)) << 5));
+			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
+			break;
+		}
+
+		input_sync(input);
+	}
+
+	/* Report the state of the two buttons at the top of the tablet
+	 * as two extra fingerpad keys (buttons 4 & 5). */
+	rw = data[7] & 0x03;
+	if (rw != wdata->butstate) {
+		wdata->butstate = rw;
+		input_report_key(input, BTN_0, rw & 0x02);
+		input_report_key(input, BTN_1, rw & 0x01);
+		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+		input_sync(input);
+	}
+
+	return 1;
+}
+
+static int wacom_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	struct wacom_data *wdata;
+	int ret;
+
+	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
+	if (wdata == NULL) {
+		dev_err(&hdev->dev, "can't alloc wacom descriptor\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, wdata);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err_free;
+	}
+
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Basics */
+	input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
+	input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
+		BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
+	input->relbit[0] |= BIT(REL_WHEEL);
+	set_bit(BTN_TOOL_PEN, input->keybit);
+	set_bit(BTN_TOUCH, input->keybit);
+	set_bit(BTN_STYLUS, input->keybit);
+	set_bit(BTN_STYLUS2, input->keybit);
+	set_bit(BTN_LEFT, input->keybit);
+	set_bit(BTN_RIGHT, input->keybit);
+	set_bit(BTN_MIDDLE, input->keybit);
+
+	/* Pad */
+	input->evbit[0] |= BIT(EV_MSC);
+	input->mscbit[0] |= BIT(MSC_SERIAL);
+
+	/* Distance, rubber and mouse */
+	input->absbit[0] |= BIT(ABS_DISTANCE);
+	set_bit(BTN_TOOL_RUBBER, input->keybit);
+	set_bit(BTN_TOOL_MOUSE, input->keybit);
+
+	input->absmax[ABS_PRESSURE] = 511;
+	input->absmax[ABS_DISTANCE] = 32;
+
+	input->absmax[ABS_X] = 16704;
+	input->absmax[ABS_Y] = 12064;
+	input->absfuzz[ABS_X] = 4;
+	input->absfuzz[ABS_Y] = 4;
+
+	return 0;
+err_free:
+	kfree(wdata);
+	return ret;
+}
+
+static void wacom_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id wacom_devices[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, wacom_devices);
+
+static struct hid_driver wacom_driver = {
+	.name = "wacom",
+	.id_table = wacom_devices,
+	.probe = wacom_probe,
+	.remove = wacom_remove,
+	.raw_event = wacom_raw_event,
+};
+
+static int wacom_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&wacom_driver);
+	if (ret)
+		printk(KERN_ERR "can't register wacom driver\n");
+	printk(KERN_ERR "wacom driver registered\n");
+	return ret;
+}
+
+static void wacom_exit(void)
+{
+	hid_unregister_driver(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-zpff.c b/drivers/hid/hid-zpff.c
index 85a198a1853..57f710757bf 100644
--- a/drivers/hid/hid-zpff.c
+++ b/drivers/hid/hid-zpff.c
@@ -27,6 +27,7 @@
 
 #include "hid-ids.h"
 
+#ifdef CONFIG_ZEROPLUS_FF
 #include "usbhid/usbhid.h"
 
 struct zpff_device {
@@ -108,6 +109,12 @@ static int zpff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int zpff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int zp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 00ccf4b1985..0c6639ea03d 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -349,10 +349,7 @@ int hidraw_connect(struct hid_device *hid)
 	int minor, result;
 	struct hidraw *dev;
 
-	/* TODO currently we accept any HID device. This should later
-	 * probably be fixed to accept only those devices which provide
-	 * non-input applications
-	 */
+	/* we accept any HID device, no matter the applications */
 
 	dev = kzalloc(sizeof(struct hidraw), GFP_KERNEL);
 	if (!dev)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index ac8049b5f1e..76c4bbe9dcc 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1234,12 +1234,11 @@ static int hid_post_reset(struct usb_interface *intf)
 	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status;
- 
+
 	spin_lock_irq(&usbhid->lock);
 	clear_bit(HID_RESET_PENDING, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->lock);
 	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
-	/* FIXME: Any more reinitialization needed? */
 	status = hid_start_in(hid);
 	if (status < 0)
 		hid_io_error(hid);
@@ -1251,14 +1250,14 @@ static int hid_post_reset(struct usb_interface *intf)
 int usbhid_get_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	return usb_autopm_get_interface(usbhid->intf);
 }
 
 void usbhid_put_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	usb_autopm_put_interface(usbhid->intf);
 }
 
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index b5e3b285169..a1787fdf5b9 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -182,7 +182,7 @@ static struct platform_driver lm78_isa_driver = {
 		.name	= "lm78",
 	},
 	.probe		= lm78_isa_probe,
-	.remove		= lm78_isa_remove,
+	.remove		= __devexit_p(lm78_isa_remove),
 };
 
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f1c6ca7e285..c8460fa9cfa 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -298,7 +298,7 @@ config I2C_BLACKFIN_TWI
 config I2C_BLACKFIN_TWI_CLK_KHZ
 	int "Blackfin TWI I2C clock (kHz)"
 	depends on I2C_BLACKFIN_TWI
-	range 10 400
+	range 21 400
 	default 50
 	help
 	  The unit of the TWI clock is kHz.
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index fc548b3d002..26d8987e69b 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -104,9 +104,14 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) | STOP);
 		else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-				iface->cur_msg+1 < iface->msg_num)
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | RSTART);
+		         iface->cur_msg + 1 < iface->msg_num) {
+			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | RSTART | MDIR);
+			else
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
+		}
 		SSYNC();
 		/* Clear status */
 		write_INT_STAT(iface, XMTSERV);
@@ -134,9 +139,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 				read_MASTER_CTL(iface) | STOP);
 			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-				iface->cur_msg+1 < iface->msg_num) {
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | RSTART);
+		           iface->cur_msg + 1 < iface->msg_num) {
+			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | RSTART | MDIR);
+			else
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
 			SSYNC();
 		}
 		/* Clear interrupt source */
@@ -196,8 +205,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | MEN | MDIR);
 			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 				iface->cur_msg+1 < iface->msg_num) {
@@ -222,18 +229,19 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			}
 
 			if (iface->pmsg[iface->cur_msg].len <= 255)
-				write_MASTER_CTL(iface,
-				iface->pmsg[iface->cur_msg].len << 6);
+					write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) &
+					(~(0xff << 6))) |
+				(iface->pmsg[iface->cur_msg].len << 6));
 			else {
-				write_MASTER_CTL(iface, 0xff << 6);
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) |
+					(0xff << 6)));
 				iface->manual_stop = 1;
 			}
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			write_MASTER_CTL(iface, read_MASTER_CTL(iface) |
-				MEN | ((iface->read_write == I2C_SMBUS_READ) ?
-				MDIR : 0));
 			SSYNC();
 		} else {
 			iface->result = 1;
@@ -441,6 +449,16 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 		}
 		iface->transPtr = data->block;
 		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = (u8 *)&data->block[1];
+		break;
 	default:
 		return -1;
 	}
@@ -564,7 +582,7 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
-	       I2C_FUNC_I2C;
+	       I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 static struct i2c_algorithm bfin_twi_algorithm = {
@@ -614,6 +632,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	struct i2c_adapter *p_adap;
 	struct resource *res;
 	int rc;
+	unsigned int clkhilow;
 
 	iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
 	if (!iface) {
@@ -675,10 +694,14 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	/* Set TWI internal clock as 10MHz */
 	write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
 
+	/*
+	 * We will not end up with a CLKDIV=0 because no one will specify
+	 * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100)
+	 */
+	clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ;
+
 	/* Set Twi interface clock as specified */
-	write_CLKDIV(iface, ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
-			<< 8) | ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
-			& 0xFF));
+	write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
 
 	/* Enable TWI */
 	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e5193bf7548..3542c6ba98f 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -216,6 +216,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 	struct ocores_i2c_platform_data *pdata;
 	struct resource *res, *res2;
 	int ret;
+	int i;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -271,6 +272,10 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 		goto add_adapter_failed;
 	}
 
+	/* add in known devices to the bus */
+	for (i = 0; i < pdata->num_devices; i++)
+		i2c_new_device(&i2c->adap, pdata->devices + i);
+
 	return 0;
 
 add_adapter_failed:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ece0125a1ee..c73475dd0fb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -333,8 +333,18 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 
-		/* HSI2C controller internal clk rate should be 19.2 Mhz */
-		internal_clk = 19200;
+		/*
+		 * HSI2C controller internal clk rate should be 19.2 Mhz for
+		 * HS and for all modes on 2430. On 34xx we can use lower rate
+		 * to get longer filter period for better noise suppression.
+		 * The filter is iclk (fclk for HS) period.
+		 */
+		if (dev->speed > 400 || cpu_is_omap_2430())
+			internal_clk = 19200;
+		else if (dev->speed > 100)
+			internal_clk = 9600;
+		else
+			internal_clk = 4000;
 		fclk_rate = clk_get_rate(dev->fclk) / 1000;
 
 		/* Compute prescaler divisor */
@@ -343,17 +353,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
 		/* If configured for High Speed */
 		if (dev->speed > 400) {
+			unsigned long scl;
+
 			/* For first phase of HS mode */
-			fsscll = internal_clk / (400 * 2) - 6;
-			fssclh = internal_clk / (400 * 2) - 6;
+			scl = internal_clk / 400;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
 
 			/* For second phase of HS mode */
-			hsscll = fclk_rate / (dev->speed * 2) - 6;
-			hssclh = fclk_rate / (dev->speed * 2) - 6;
+			scl = fclk_rate / dev->speed;
+			hsscll = scl - (scl / 3) - 7;
+			hssclh = (scl / 3) - 5;
+		} else if (dev->speed > 100) {
+			unsigned long scl;
+
+			/* Fast mode */
+			scl = internal_clk / dev->speed;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
 		} else {
-			/* To handle F/S modes */
-			fsscll = internal_clk / (dev->speed * 2) - 6;
-			fssclh = internal_clk / (dev->speed * 2) - 6;
+			/* Standard mode */
+			fsscll = internal_clk / (dev->speed * 2) - 7;
+			fssclh = internal_clk / (dev->speed * 2) - 5;
 		}
 		scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 		sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index acc7143d965..035a6c7e59d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,10 +34,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+
+/*
+ * I2C register offsets will be shifted 0 or 1 bit left, depending on
+ * different SoCs
+ */
+#define REG_SHIFT_0	(0 << 0)
+#define REG_SHIFT_1	(1 << 0)
+#define REG_SHIFT(d)	((d) & 0x1)
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+	{ "pxa2xx-i2c",		REG_SHIFT_1 },
+	{ "pxa3xx-pwri2c",	REG_SHIFT_0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 
 /*
  * I2C registers and bit definitions
@@ -985,6 +999,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	struct pxa_i2c *i2c;
 	struct resource *res;
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	struct platform_device_id *id = platform_get_device_id(dev);
 	int ret;
 	int irq;
 
@@ -1028,7 +1043,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		ret = -EIO;
 		goto eremap;
 	}
-	i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
+	i2c->reg_shift = REG_SHIFT(id->driver_data);
 
 	i2c->iobase = res->start;
 	i2c->iosize = res_len(res);
@@ -1150,6 +1165,7 @@ static struct platform_driver i2c_pxa_driver = {
 		.name	= "pxa2xx-i2c",
 		.owner	= THIS_MODULE,
 	},
+	.id_table	= i2c_pxa_id_table,
 };
 
 static int __init i2c_adap_pxa_init(void)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1691ef0f1ee..079a312d36f 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -51,6 +51,11 @@ enum s3c24xx_i2c_state {
 	STATE_STOP
 };
 
+enum s3c24xx_i2c_type {
+	TYPE_S3C2410,
+	TYPE_S3C2440,
+};
+
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
@@ -88,8 +93,10 @@ struct s3c24xx_i2c {
 static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
 {
 	struct platform_device *pdev = to_platform_device(i2c->dev);
+	enum s3c24xx_i2c_type type;
 
-	return !strcmp(pdev->name, "s3c2440-i2c");
+	type = platform_get_device_id(pdev)->driver_data;
+	return type == TYPE_S3C2440;
 }
 
 /* s3c24xx_i2c_master_complete
@@ -969,52 +976,41 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
 
 /* device driver for platform bus bits */
 
-static struct platform_driver s3c2410_i2c_driver = {
-	.probe		= s3c24xx_i2c_probe,
-	.remove		= s3c24xx_i2c_remove,
-	.suspend_late	= s3c24xx_i2c_suspend_late,
-	.resume		= s3c24xx_i2c_resume,
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c2410-i2c",
-	},
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-i2c",
+		.driver_data	= TYPE_S3C2410,
+	}, {
+		.name		= "s3c2440-i2c",
+		.driver_data	= TYPE_S3C2440,
+	}, { },
 };
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
-static struct platform_driver s3c2440_i2c_driver = {
+static struct platform_driver s3c24xx_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
 	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
+	.id_table	= s3c24xx_driver_ids,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "s3c2440-i2c",
+		.name	= "s3c-i2c",
 	},
 };
 
 static int __init i2c_adap_s3c_init(void)
 {
-	int ret;
-
-	ret = platform_driver_register(&s3c2410_i2c_driver);
-	if (ret == 0) {
-		ret = platform_driver_register(&s3c2440_i2c_driver);
-		if (ret)
-			platform_driver_unregister(&s3c2410_i2c_driver);
-	}
-
-	return ret;
+	return platform_driver_register(&s3c24xx_i2c_driver);
 }
 subsys_initcall(i2c_adap_s3c_init);
 
 static void __exit i2c_adap_s3c_exit(void)
 {
-	platform_driver_unregister(&s3c2410_i2c_driver);
-	platform_driver_unregister(&s3c2440_i2c_driver);
+	platform_driver_unregister(&s3c24xx_i2c_driver);
 }
 module_exit(i2c_adap_s3c_exit);
 
 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c2410-i2c");
-MODULE_ALIAS("platform:s3c2440-i2c");
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index baa28b73ae4..b9680f50f54 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -396,7 +396,7 @@ static int __devinit calc_CCR(unsigned long scl_hz)
 	signed char cdf, cdfm;
 	int scgd, scgdm, scgds;
 
-	mclk = clk_get(NULL, "module_clk");
+	mclk = clk_get(NULL, "peripheral_clk");
 	if (IS_ERR(mclk)) {
 		return PTR_ERR(mclk);
 	} else {
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf06494bb74..9a5d0aaac9d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@ menuconfig IDE
 	  SMART parameters from disk drives.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ide-core.ko.
+	  module will be called ide-core.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index 537da1cde16..e59b6dee9ae 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -402,27 +402,23 @@ static u8 ali_cable_detect(ide_hwif_t *hwif)
 	return cbl;
 }
 
-#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
+#ifndef CONFIG_SPARC64
 /**
  *	init_hwif_ali15x3	-	Initialize the ALI IDE x86 stuff
  *	@hwif: interface to configure
  *
  *	Obtain the IRQ tables for an ALi based IDE solution on the PC
  *	class platforms. This part of the code isn't applicable to the
- *	Sparc and PowerPC systems.
+ *	Sparc systems.
  */
 
 static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 ideic, inmir;
 	s8 irq_routing_table[] = { -1,  9, 3, 10, 4,  5, 7,  6,
 				      1, 11, 0, 12, 0, 14, 0, 15 };
 	int irq = -1;
 
-	if (dev->device == PCI_DEVICE_ID_AL_M5229)
-		hwif->irq = hwif->channel ? 15 : 14;
-
 	if (isa_dev) {
 		/*
 		 * read IDE interface control
@@ -455,7 +451,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
 }
 #else
 #define init_hwif_ali15x3 NULL
-#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
+#endif /* CONFIG_SPARC64 */
 
 /**
  *	init_dma_ali15x3	-	set up DMA on ALi15x3
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 403d0e4265d..fc0949a8cfd 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -216,6 +216,7 @@ static const struct ide_port_info at91_ide_port_info __initdata = {
 	.host_flags 	= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
 			  IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
 	.pio_mask 	= ATA_PIO6,
+	.chipset	= ide_generic,
 };
 
 /*
@@ -246,8 +247,7 @@ irqreturn_t at91_irq_handler(int irq, void *dev_id)
 static int __init at91_ide_probe(struct platform_device *pdev)
 {
 	int ret;
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	unsigned long tf_base = 0, ctl_base = 0;
@@ -304,10 +304,9 @@ static int __init at91_ide_probe(struct platform_device *pdev)
 		ide_std_init_ports(&hw, tf_base, ctl_base + 6);
 
 	hw.irq = board->irq_pin;
-	hw.chipset = ide_generic;
 	hw.dev = &pdev->dev;
 
-	host = ide_host_alloc(&at91_ide_port_info, hws);
+	host = ide_host_alloc(&at91_ide_port_info, hws, 1);
 	if (!host) {
 		perr("failed to allocate ide host\n");
 		return -ENOMEM;
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 46013644c96..58121bd6c11 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -449,7 +449,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 }
 #endif
 
-static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif)
 {
 	int i;
 	unsigned long *ata_regs = hw->io_ports_array;
@@ -499,6 +499,7 @@ static const struct ide_port_info au1xxx_port_info = {
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	.mwdma_mask		= ATA_MWDMA2,
 #endif
+	.chipset		= ide_au1xxx,
 };
 
 static int au_ide_probe(struct platform_device *dev)
@@ -507,7 +508,7 @@ static int au_ide_probe(struct platform_device *dev)
 	struct resource *res;
 	struct ide_host *host;
 	int ret = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 	char *mode = "MWDMA2";
@@ -548,9 +549,8 @@ static int au_ide_probe(struct platform_device *dev)
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_au1xxx;
 
-	ret = ide_host_add(&au1xxx_port_info, hws, &host);
+	ret = ide_host_add(&au1xxx_port_info, hws, 1, &host);
 	if (ret)
 		goto out;
 
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index d028f8864bc..e3c6a591330 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -121,7 +121,7 @@ static int xsurf_ack_intr(ide_hwif_t *hwif)
     return 1;
 }
 
-static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
 				      unsigned long ctl, unsigned long irq_port,
 				      ide_ack_intr_t *ack_intr)
 {
@@ -139,13 +139,12 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = IRQ_AMIGA_PORTS;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info buddha_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
     /*
@@ -161,7 +160,7 @@ static int __init buddha_init(void)
 
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
-		hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
 			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -225,7 +224,7 @@ fail_base2:
 			hws[i] = &hw[i];
 		}
 
-		ide_host_add(&buddha_port_info, hws, NULL);
+		ide_host_add(&buddha_port_info, hws, i, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 8890276fef7..1683ed5c732 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -708,7 +708,7 @@ static int __init cmd640x_init(void)
 	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	u8 b, cfr;
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[2];
 
 	if (cmd640_vlb && probe_for_cmd640_vlb()) {
 		bus_type = "VLB";
@@ -762,11 +762,9 @@ static int __init cmd640x_init(void)
 
 	ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
 	hw[0].irq = 14;
-	hw[0].chipset = ide_cmd640;
 
 	ide_std_init_ports(&hw[1], 0x170, 0x376);
 	hw[1].irq = 15;
-	hw[1].chipset = ide_cmd640;
 
 	printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
 			 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
@@ -824,7 +822,8 @@ static int __init cmd640x_init(void)
 	cmd640_dump_regs();
 #endif
 
-	return ide_host_add(&cmd640_port_info, hws, NULL);
+	return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1,
+			    NULL);
 }
 
 module_param_named(probe_vlb, cmd640_vlb, bool, 0);
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 87987a7d36c..bd066bb9d61 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -110,7 +110,7 @@ static const struct ide_port_info cyrix_chipset __devinitdata = {
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	const struct ide_port_info *d = &cyrix_chipset;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { NULL, NULL };
 
 	ide_setup_pci_noise(dev, d);
 
@@ -136,7 +136,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
 	hw[0].irq = 14;
 
-	return ide_host_add(d, hws, NULL);
+	return ide_host_add(d, hws, 2, NULL);
 }
 
 static const struct pci_device_id cs5520_pci_tbl[] = {
diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c
index f153b95619b..1e10eba62ce 100644
--- a/drivers/ide/delkin_cb.c
+++ b/drivers/ide/delkin_cb.c
@@ -68,6 +68,7 @@ static const struct ide_port_info delkin_cb_port_info = {
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.init_chipset		= delkin_cb_init_chipset,
+	.chipset		= ide_pci,
 };
 
 static int __devinit
@@ -76,7 +77,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	struct ide_host *host;
 	unsigned long base;
 	int rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	rc = pci_enable_device(dev);
 	if (rc) {
@@ -97,9 +98,8 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;		/* this enables IRQ sharing */
 
-	rc = ide_host_add(&delkin_cb_port_info, hws, &host);
+	rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host);
 	if (rc)
 		goto out_disable;
 
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index 0e2df6755ec..22fa27389c3 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -111,9 +111,10 @@ static const struct ide_port_info falconide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
-static void __init falconide_setup_ports(hw_regs_t *hw)
+static void __init falconide_setup_ports(struct ide_hw *hw)
 {
 	int i;
 
@@ -128,8 +129,6 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
 
 	hw->irq = IRQ_MFP_IDE;
 	hw->ack_intr = NULL;
-
-	hw->chipset = ide_generic;
 }
 
     /*
@@ -139,7 +138,7 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
 static int __init falconide_init(void)
 {
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
@@ -154,7 +153,7 @@ static int __init falconide_init(void)
 
 	falconide_setup_ports(&hw);
 
-	host = ide_host_alloc(&falconide_port_info, hws);
+	host = ide_host_alloc(&falconide_port_info, hws, 1);
 	if (host == NULL) {
 		rc = -ENOMEM;
 		goto err;
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index c7119516c5a..4451a6a5dfe 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -88,7 +88,7 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
     return 1;
 }
 
-static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 				     unsigned long ctl, unsigned long irq_port,
 				     ide_ack_intr_t *ack_intr)
 {
@@ -106,14 +106,13 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = IRQ_AMIGA_PORTS;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info gayle_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
     /*
@@ -126,7 +125,7 @@ static int __init gayle_init(void)
     unsigned long base, ctrlport, irqport;
     ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
-    hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -171,7 +170,7 @@ found:
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, NULL);
+    rc = ide_host_add(&gayle_port_info, hws, i, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);
 
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 0feb66c720e..7ce68ef6b90 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -138,14 +138,6 @@
 #undef	HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
 
-static const char *quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static const char *bad_ata100_5[] = {
 	"IBM-DTLA-307075",
 	"IBM-DTLA-307060",
@@ -729,27 +721,13 @@ static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static void hpt3xx_quirkproc(ide_drive_t *drive)
-{
-	char *m			= (char *)&drive->id[ATA_ID_PROD];
-	const  char **list	= quirk_drives;
-
-	while (*list)
-		if (strstr(m, *list++)) {
-			drive->quirk_list = 1;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
-	if (drive->quirk_list == 0)
+	if ((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
 		return;
 
 	if (info->chip_type >= HPT370) {
@@ -1404,7 +1382,6 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
 static const struct ide_port_ops hpt3xx_port_ops = {
 	.set_pio_mode		= hpt3xx_set_pio_mode,
 	.set_dma_mode		= hpt3xx_set_mode,
-	.quirkproc		= hpt3xx_quirkproc,
 	.maskproc		= hpt3xx_maskproc,
 	.mdma_filter		= hpt3xx_mdma_filter,
 	.udma_filter		= hpt3xx_udma_filter,
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 4e16ce68b06..5af3d0ffaf0 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,8 +65,6 @@ static struct cardinfo icside_cardinfo_v6_2 = {
 };
 
 struct icside_state {
-	unsigned int channel;
-	unsigned int enabled;
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
 	unsigned int sel;
@@ -116,18 +114,11 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
 	struct icside_state *state = ec->irq_data;
 	void __iomem *base = state->irq_port;
 
-	state->enabled = 1;
+	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+	readb(base + ICS_ARCIN_V6_INTROFFSET_2);
 
-	switch (state->channel) {
-	case 0:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
-		break;
-	case 1:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
-		break;
-	}
+	writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+	readb(base + ICS_ARCIN_V6_INTROFFSET_1);
 }
 
 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -137,8 +128,6 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
 {
 	struct icside_state *state = ec->irq_data;
 
-	state->enabled = 0;
-
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
 	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
 }
@@ -160,44 +149,6 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
 	.irqpending	= icside_irqpending_arcin_v6,
 };
 
-/*
- * Handle routing of interrupts.  This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-	struct icside_state *state = ecard_get_drvdata(ec);
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	state->channel = hwif->channel;
-
-	if (state->enabled && !mask) {
-		switch (hwif->channel) {
-		case 0:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			break;
-		case 1:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			break;
-		}
-	} else {
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-	}
-
-	local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
-	.maskproc		= icside_maskproc,
-};
-
 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 /*
  * SG-DMA support.
@@ -275,7 +226,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 
 static const struct ide_port_ops icside_v6_port_ops = {
 	.set_dma_mode		= icside_set_dma_mode,
-	.maskproc		= icside_maskproc,
 };
 
 static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -320,11 +270,6 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	BUG_ON(dma_channel_active(ec->dma));
 
 	/*
-	 * Ensure that we have the right interrupt routed.
-	 */
-	icside_maskproc(drive, 0);
-
-	/*
 	 * Route the DMA signals to the correct interface.
 	 */
 	writeb(state->sel | hwif->channel, state->ioc_base);
@@ -381,7 +326,7 @@ static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 	return -EOPNOTSUPP;
 }
 
-static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
+static void icside_setup_ports(struct ide_hw *hw, void __iomem *base,
 			       struct cardinfo *info, struct expansion_card *ec)
 {
 	unsigned long port = (unsigned long)base + info->dataoffset;
@@ -398,11 +343,11 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
 
 	hw->irq = ec->irq;
 	hw->dev = &ec->dev;
-	hw->chipset = ide_acorn;
 }
 
 static const struct ide_port_info icside_v5_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_acorn,
 };
 
 static int __devinit
@@ -410,7 +355,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
 	void __iomem *base;
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int ret;
 
 	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
@@ -431,7 +376,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
 
-	host = ide_host_alloc(&icside_v5_port_info, hws);
+	host = ide_host_alloc(&icside_v5_port_info, hws, 1);
 	if (host == NULL)
 		return -ENODEV;
 
@@ -452,11 +397,11 @@ err_free:
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
-	.port_ops		= &icside_v6_no_dma_port_ops,
 	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
 	.swdma_mask		= ATA_SWDMA2,
+	.chipset		= ide_acorn,
 };
 
 static int __devinit
@@ -466,7 +411,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	struct ide_host *host;
 	unsigned int sel = 0;
 	int ret;
-	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] };
 	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
@@ -506,7 +451,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
 	icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
 
-	host = ide_host_alloc(&d, hws);
+	host = ide_host_alloc(&d, hws, 2);
 	if (host == NULL)
 		return -ENODEV;
 
diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c
index 78aca75a2c4..979d342c338 100644
--- a/drivers/ide/ide-4drives.c
+++ b/drivers/ide/ide-4drives.c
@@ -25,12 +25,13 @@ static const struct ide_port_info ide_4drives_port_info = {
 	.port_ops		= &ide_4drives_port_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA |
 				  IDE_HFLAG_4DRIVES,
+	.chipset		= ide_4drives,
 };
 
 static int __init ide_4drives_init(void)
 {
 	unsigned long base = 0x1f0, ctl = 0x3f6;
-	hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw, &hw };
 
 	if (probe_4drives == 0)
 		return -ENODEV;
@@ -52,9 +53,8 @@ static int __init ide_4drives_init(void)
 
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = 14;
-	hw.chipset = ide_4drives;
 
-	return ide_host_add(&ide_4drives_port_info, hws, NULL);
+	return ide_host_add(&ide_4drives_port_info, hws, 2, NULL);
 }
 
 module_init(ide_4drives_init);
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7201b176d75..702ef64a0f1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -80,34 +80,6 @@ void ide_init_pc(struct ide_atapi_pc *pc)
 EXPORT_SYMBOL_GPL(ide_init_pc);
 
 /*
- * Generate a new packet command request in front of the request queue, before
- * the current request, so that it will be processed immediately, on the next
- * pass through the driver.
- */
-static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
-			      struct ide_atapi_pc *pc, struct request *rq)
-{
-	blk_rq_init(NULL, rq);
-	rq->cmd_type = REQ_TYPE_SPECIAL;
-	rq->cmd_flags |= REQ_PREEMPT;
-	rq->buffer = (char *)pc;
-	rq->rq_disk = disk;
-
-	if (pc->req_xfer) {
-		rq->data = pc->buf;
-		rq->data_len = pc->req_xfer;
-	}
-
-	memcpy(rq->cmd, pc->c, 12);
-	if (drive->media == ide_tape)
-		rq->cmd[13] = REQ_IDETAPE_PC1;
-
-	drive->hwif->rq = NULL;
-
-	elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
-}
-
-/*
  * Add a special packet command request to the tail of the request queue,
  * and wait for it to be serviced.
  */
@@ -119,19 +91,21 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
-	rq->buffer = (char *)pc;
+	rq->special = (char *)pc;
 
 	if (pc->req_xfer) {
-		rq->data = pc->buf;
-		rq->data_len = pc->req_xfer;
+		error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer,
+					GFP_NOIO);
+		if (error)
+			goto put_req;
 	}
 
 	memcpy(rq->cmd, pc->c, 12);
 	if (drive->media == ide_tape)
 		rq->cmd[13] = REQ_IDETAPE_PC1;
 	error = blk_execute_rq(drive->queue, disk, rq, 0);
+put_req:
 	blk_put_request(rq);
-
 	return error;
 }
 EXPORT_SYMBOL_GPL(ide_queue_pc_tail);
@@ -191,20 +165,113 @@ void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
 }
 EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);
 
+void ide_prep_sense(ide_drive_t *drive, struct request *rq)
+{
+	struct request_sense *sense = &drive->sense_data;
+	struct request *sense_rq = &drive->sense_rq;
+	unsigned int cmd_len, sense_len;
+	int err;
+
+	debug_log("%s: enter\n", __func__);
+
+	switch (drive->media) {
+	case ide_floppy:
+		cmd_len = 255;
+		sense_len = 18;
+		break;
+	case ide_tape:
+		cmd_len = 20;
+		sense_len = 20;
+		break;
+	default:
+		cmd_len = 18;
+		sense_len = 18;
+	}
+
+	BUG_ON(sense_len > sizeof(*sense));
+
+	if (blk_sense_request(rq) || drive->sense_rq_armed)
+		return;
+
+	memset(sense, 0, sizeof(*sense));
+
+	blk_rq_init(rq->q, sense_rq);
+
+	err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len,
+			      GFP_NOIO);
+	if (unlikely(err)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "%s: failed to map sense buffer\n",
+			       drive->name);
+		return;
+	}
+
+	sense_rq->rq_disk = rq->rq_disk;
+	sense_rq->cmd[0] = GPCMD_REQUEST_SENSE;
+	sense_rq->cmd[4] = cmd_len;
+	sense_rq->cmd_type = REQ_TYPE_SENSE;
+	sense_rq->cmd_flags |= REQ_PREEMPT;
+
+	if (drive->media == ide_tape)
+		sense_rq->cmd[13] = REQ_IDETAPE_PC1;
+
+	drive->sense_rq_armed = true;
+}
+EXPORT_SYMBOL_GPL(ide_prep_sense);
+
+int ide_queue_sense_rq(ide_drive_t *drive, void *special)
+{
+	/* deferred failure from ide_prep_sense() */
+	if (!drive->sense_rq_armed) {
+		printk(KERN_WARNING "%s: failed queue sense request\n",
+		       drive->name);
+		return -ENOMEM;
+	}
+
+	drive->sense_rq.special = special;
+	drive->sense_rq_armed = false;
+
+	drive->hwif->rq = NULL;
+
+	elv_add_request(drive->queue, &drive->sense_rq,
+			ELEVATOR_INSERT_FRONT, 0);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ide_queue_sense_rq);
+
 /*
  * Called when an error was detected during the last packet command.
- * We queue a request sense packet command in the head of the request list.
+ * We queue a request sense packet command at the head of the request
+ * queue.
  */
-void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
+void ide_retry_pc(ide_drive_t *drive)
 {
-	struct request *rq = &drive->request_sense_rq;
+	struct request *failed_rq = drive->hwif->rq;
+	struct request *sense_rq = &drive->sense_rq;
 	struct ide_atapi_pc *pc = &drive->request_sense_pc;
 
 	(void)ide_read_error(drive);
-	ide_create_request_sense_cmd(drive, pc);
+
+	/* init pc from sense_rq */
+	ide_init_pc(pc);
+	memcpy(pc->c, sense_rq->cmd, 12);
+	pc->buf = bio_data(sense_rq->bio);	/* pointer to mapped address */
+	pc->req_xfer = blk_rq_bytes(sense_rq);
+
 	if (drive->media == ide_tape)
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
-	ide_queue_pc_head(drive, disk, pc, rq);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
+
+	/*
+	 * Push back the failed request and put request sense on top
+	 * of it.  The failed command will be retried after sense data
+	 * is acquired.
+	 */
+	blk_requeue_request(failed_rq->q, failed_rq);
+	drive->hwif->rq = NULL;
+	if (ide_queue_sense_rq(drive, pc)) {
+		blk_start_request(failed_rq);
+		ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq));
+	}
 }
 EXPORT_SYMBOL_GPL(ide_retry_pc);
 
@@ -246,7 +313,7 @@ int ide_cd_get_xferlen(struct request *rq)
 		return 32768;
 	else if (blk_sense_request(rq) || blk_pc_request(rq) ||
 			 rq->cmd_type == REQ_TYPE_ATA_PC)
-		return rq->data_len;
+		return blk_rq_bytes(rq);
 	else
 		return 0;
 }
@@ -276,7 +343,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 	struct ide_cmd *cmd = &hwif->cmd;
 	struct request *rq = hwif->rq;
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
-	xfer_func_t *xferfunc;
 	unsigned int timeout, done;
 	u16 bcount;
 	u8 stat, ireason, dsc = 0;
@@ -303,18 +369,14 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 					drive->name, rq_data_dir(pc->rq)
 						     ? "write" : "read");
 			pc->flags |= PC_FLAG_DMA_ERROR;
-		} else {
+		} else
 			pc->xferred = pc->req_xfer;
-			if (drive->pc_update_buffers)
-				drive->pc_update_buffers(drive, pc);
-		}
 		debug_log("%s: DMA finished\n", drive->name);
 	}
 
 	/* No more interrupts */
 	if ((stat & ATA_DRQ) == 0) {
 		int uptodate, error;
-		unsigned int done;
 
 		debug_log("Packet command completed, %d bytes transferred\n",
 			  pc->xferred);
@@ -343,7 +405,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 			debug_log("[cmd %x]: check condition\n", rq->cmd[0]);
 
 			/* Retry operation */
-			ide_retry_pc(drive, rq->rq_disk);
+			ide_retry_pc(drive);
 
 			/* queued, but not started */
 			return ide_stopped;
@@ -353,6 +415,12 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
 			dsc = 1;
 
+		/*
+		 * ->pc_callback() might change rq->data_len for
+		 * residual count, cache total length.
+		 */
+		done = blk_rq_bytes(rq);
+
 		/* Command finished - Call the callback function */
 		uptodate = drive->pc_callback(drive, dsc);
 
@@ -361,7 +429,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 		if (blk_special_request(rq)) {
 			rq->errors = 0;
-			done = blk_rq_bytes(rq);
 			error = 0;
 		} else {
 
@@ -370,15 +437,10 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 					rq->errors = -EIO;
 			}
 
-			if (drive->media == ide_tape)
-				done = ide_rq_bytes(rq); /* FIXME */
-			else
-				done = blk_rq_bytes(rq);
-
 			error = uptodate ? 0 : -EIO;
 		}
 
-		ide_complete_rq(drive, error, done);
+		ide_complete_rq(drive, error, blk_rq_bytes(rq));
 		return ide_stopped;
 	}
 
@@ -407,21 +469,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		return ide_do_reset(drive);
 	}
 
-	xferfunc = write ? tp_ops->output_data : tp_ops->input_data;
-
-	if (drive->media == ide_floppy && pc->buf == NULL) {
-		done = min_t(unsigned int, bcount, cmd->nleft);
-		ide_pio_bytes(drive, cmd, write, done);
-	} else if (drive->media == ide_tape && pc->bh) {
-		done = drive->pc_io_buffers(drive, pc, bcount, write);
-	} else {
-		done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred);
-		xferfunc(drive, NULL, pc->cur_pos, done);
-	}
+	done = min_t(unsigned int, bcount, cmd->nleft);
+	ide_pio_bytes(drive, cmd, write, done);
 
-	/* Update the current position */
+	/* Update transferred byte count */
 	pc->xferred += done;
-	pc->cur_pos += done;
 
 	bcount -= done;
 
@@ -525,7 +577,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 
 		/*
 		 * If necessary schedule the packet transfer to occur 'timeout'
-		 * miliseconds later in ide_delayed_transfer_pc() after the
+		 * milliseconds later in ide_delayed_transfer_pc() after the
 		 * device says it's ready for a packet.
 		 */
 		if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
@@ -599,7 +651,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 
 		/* We haven't transferred any data yet */
 		pc->xferred = 0;
-		pc->cur_pos = pc->buf;
 
 		valid_tf = IDE_VALID_DEVICE;
 		bcount = ((drive->media == ide_tape) ?
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 925eb9e245d..424140c6c40 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -182,7 +182,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 				 (sense->information[2] <<  8) |
 				 (sense->information[3]);
 
-			if (drive->queue->hardsect_size == 2048)
+			if (queue_logical_block_size(drive->queue) == 2048)
 				/* device sector size is 2K */
 				sector <<= 2;
 
@@ -206,54 +206,25 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 	ide_cd_log_error(drive->name, failed_command, sense);
 }
 
-static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
-				      struct request *failed_command)
-{
-	struct cdrom_info *info		= drive->driver_data;
-	struct request *rq		= &drive->request_sense_rq;
-
-	ide_debug_log(IDE_DBG_SENSE, "enter");
-
-	if (sense == NULL)
-		sense = &info->sense_data;
-
-	/* stuff the sense request in front of our current request */
-	blk_rq_init(NULL, rq);
-	rq->cmd_type = REQ_TYPE_ATA_PC;
-	rq->rq_disk = info->disk;
-
-	rq->data = sense;
-	rq->cmd[0] = GPCMD_REQUEST_SENSE;
-	rq->cmd[4] = 18;
-	rq->data_len = 18;
-
-	rq->cmd_type = REQ_TYPE_SENSE;
-	rq->cmd_flags |= REQ_PREEMPT;
-
-	/* NOTE! Save the failed command in "rq->buffer" */
-	rq->buffer = (void *) failed_command;
-
-	if (failed_command)
-		ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x",
-					     failed_command->cmd[0]);
-
-	drive->hwif->rq = NULL;
-
-	elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
-}
-
 static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq)
 {
 	/*
-	 * For REQ_TYPE_SENSE, "rq->buffer" points to the original
-	 * failed request
+	 * For REQ_TYPE_SENSE, "rq->special" points to the original
+	 * failed request.  Also, the sense data should be read
+	 * directly from rq which might be different from the original
+	 * sense buffer if it got copied during mapping.
 	 */
-	struct request *failed = (struct request *)rq->buffer;
-	struct cdrom_info *info = drive->driver_data;
-	void *sense = &info->sense_data;
+	struct request *failed = (struct request *)rq->special;
+	void *sense = bio_data(rq->bio);
 
 	if (failed) {
 		if (failed->sense) {
+			/*
+			 * Sense is always read into drive->sense_data.
+			 * Copy back if the failed request has its
+			 * sense pointer set.
+			 */
+			memcpy(failed->sense, sense, 18);
 			sense = failed->sense;
 			failed->sense_len = rq->sense_len;
 		}
@@ -428,22 +399,13 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 
 	/* if we got a CHECK_CONDITION status, queue a request sense command */
 	if (stat & ATA_ERR)
-		cdrom_queue_request_sense(drive, NULL, NULL);
+		return ide_queue_sense_rq(drive, NULL) ? 2 : 1;
 	return 1;
 
 end_request:
 	if (stat & ATA_ERR) {
-		struct request_queue *q = drive->queue;
-		unsigned long flags;
-
-		spin_lock_irqsave(q->queue_lock, flags);
-		blkdev_dequeue_request(rq);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-
 		hwif->rq = NULL;
-
-		cdrom_queue_request_sense(drive, rq->sense, rq);
-		return 1;
+		return ide_queue_sense_rq(drive, rq) ? 2 : 1;
 	} else
 		return 2;
 }
@@ -503,14 +465,8 @@ static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd)
 	 * and some drives don't send them.  Sigh.
 	 */
 	if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
-	    cmd->nleft > 0 && cmd->nleft <= 5) {
-		unsigned int ofs = cmd->nbytes - cmd->nleft;
-
-		while (cmd->nleft > 0) {
-			*((u8 *)rq->data + ofs++) = 0;
-			cmd->nleft--;
-		}
-	}
+	    cmd->nleft > 0 && cmd->nleft <= 5)
+		cmd->nleft = 0;
 }
 
 int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
@@ -543,14 +499,18 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
 		rq->cmd_flags |= cmd_flags;
 		rq->timeout = timeout;
 		if (buffer) {
-			rq->data = buffer;
-			rq->data_len = *bufflen;
+			error = blk_rq_map_kern(drive->queue, rq, buffer,
+						*bufflen, GFP_NOIO);
+			if (error) {
+				blk_put_request(rq);
+				return error;
+			}
 		}
 
 		error = blk_execute_rq(drive->queue, info->disk, rq, 0);
 
 		if (buffer)
-			*bufflen = rq->data_len;
+			*bufflen = rq->resid_len;
 
 		flags = rq->cmd_flags;
 		blk_put_request(rq);
@@ -608,7 +568,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	struct request *rq = hwif->rq;
 	ide_expiry_t *expiry = NULL;
 	int dma_error = 0, dma, thislen, uptodate = 0;
-	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
+	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0;
 	int sense = blk_sense_request(rq);
 	unsigned int timeout;
 	u16 len;
@@ -738,13 +698,8 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 
 out_end:
 	if (blk_pc_request(rq) && rc == 0) {
-		unsigned int dlen = rq->data_len;
-
-		rq->data_len = 0;
-
-		if (blk_end_request(rq, 0, dlen))
-			BUG();
-
+		rq->resid_len = 0;
+		blk_end_request_all(rq, 0);
 		hwif->rq = NULL;
 	} else {
 		if (sense && uptodate)
@@ -762,21 +717,13 @@ out_end:
 			ide_cd_error_cmd(drive, cmd);
 
 		/* make sure it's fully ended */
-		if (blk_pc_request(rq))
-			nsectors = (rq->data_len + 511) >> 9;
-		else
-			nsectors = rq->hard_nr_sectors;
-
-		if (nsectors == 0)
-			nsectors = 1;
-
 		if (blk_fs_request(rq) == 0) {
-			rq->data_len -= (cmd->nbytes - cmd->nleft);
+			rq->resid_len -= cmd->nbytes - cmd->nleft;
 			if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE))
-				rq->data_len += cmd->last_xfer_len;
+				rq->resid_len += cmd->last_xfer_len;
 		}
 
-		ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9);
+		ide_complete_rq(drive, uptodate ? 0 : -EIO, blk_rq_bytes(rq));
 
 		if (sense && rc == 2)
 			ide_error(drive, "request sense failure", stat);
@@ -790,7 +737,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
 	struct request_queue *q = drive->queue;
 	int write = rq_data_dir(rq) == WRITE;
 	unsigned short sectors_per_frame =
-		queue_hardsect_size(q) >> SECTOR_BITS;
+		queue_logical_block_size(q) >> SECTOR_BITS;
 
 	ide_debug_log(IDE_DBG_RQ, "rq->cmd[0]: 0x%x, rq->cmd_flags: 0x%x, "
 				  "secs_per_frame: %u",
@@ -809,8 +756,8 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
 	}
 
 	/* fs requests *must* be hardware frame aligned */
-	if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
-	    (rq->sector & (sectors_per_frame - 1)))
+	if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) ||
+	    (blk_rq_pos(rq) & (sectors_per_frame - 1)))
 		return ide_stopped;
 
 	/* use DMA, if possible */
@@ -838,15 +785,10 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 	drive->dma = 0;
 
 	/* sg request */
-	if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
+	if (rq->bio) {
 		struct request_queue *q = drive->queue;
+		char *buf = bio_data(rq->bio);
 		unsigned int alignment;
-		char *buf;
-
-		if (rq->bio)
-			buf = bio_data(rq->bio);
-		else
-			buf = rq->data;
 
 		drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
 
@@ -858,7 +800,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 		 */
 		alignment = queue_dma_alignment(q) | q->dma_pad_mask;
 		if ((unsigned long)buf & alignment
-		    || rq->data_len & q->dma_pad_mask
+		    || blk_rq_bytes(rq) & q->dma_pad_mask
 		    || object_is_on_stack(buf))
 			drive->dma = 0;
 	}
@@ -896,6 +838,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		goto out_end;
 	}
 
+	/* prepare sense request for this command */
+	ide_prep_sense(drive, rq);
+
 	memset(&cmd, 0, sizeof(cmd));
 
 	if (rq_data_dir(rq))
@@ -903,15 +848,14 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 
 	cmd.rq = rq;
 
-	if (blk_fs_request(rq) || rq->data_len) {
-		ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? (rq->nr_sectors << 9)
-							 : rq->data_len);
+	if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+		ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
 		ide_map_sg(drive, &cmd);
 	}
 
 	return ide_issue_pc(drive, &cmd);
 out_end:
-	nsectors = rq->hard_nr_sectors;
+	nsectors = blk_rq_sectors(rq);
 
 	if (nsectors == 0)
 		nsectors = 1;
@@ -1077,8 +1021,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	/* save a private copy of the TOC capacity for error handling */
 	drive->probed_capacity = toc->capacity * sectors_per_frame;
 
-	blk_queue_hardsect_size(drive->queue,
-				sectors_per_frame << SECTOR_BITS);
+	blk_queue_logical_block_size(drive->queue,
+				     sectors_per_frame << SECTOR_BITS);
 
 	/* first read just the header, so we know how long the TOC is */
 	stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
@@ -1394,9 +1338,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 /* standard prep_rq_fn that builds 10 byte cmds */
 static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
 {
-	int hard_sect = queue_hardsect_size(q);
-	long block = (long)rq->hard_sector / (hard_sect >> 9);
-	unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
+	int hard_sect = queue_logical_block_size(q);
+	long block = (long)blk_rq_pos(rq) / (hard_sect >> 9);
+	unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9);
 
 	memset(rq->cmd, 0, BLK_MAX_CDB);
 
@@ -1599,7 +1543,7 @@ static int ide_cdrom_setup(ide_drive_t *drive)
 
 	nslots = ide_cdrom_probe_capabilities(drive);
 
-	blk_queue_hardsect_size(q, CD_FRAMESIZE);
+	blk_queue_logical_block_size(q, CD_FRAMESIZE);
 
 	if (ide_cdrom_register(drive, nslots)) {
 		printk(KERN_ERR PFX "%s: %s failed to register device with the"
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 1d97101099c..93a3cf1b0f3 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -87,10 +87,6 @@ struct cdrom_info {
 
 	struct atapi_toc *toc;
 
-	/* The result of the last successful request sense command
-	   on this device. */
-	struct request_sense sense_data;
-
 	u8 max_speed;		/* Max speed of the drive. */
 	u8 current_speed;	/* Current speed of the drive. */
 
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 9e47f3529d5..527908ff298 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -155,6 +155,7 @@ static const struct ide_port_info idecs_port_info = {
 	.port_ops		= &idecs_port_ops,
 	.host_flags		= IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_pci,
 };
 
 static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
@@ -163,7 +164,7 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
     struct ide_host *host;
     ide_hwif_t *hwif;
     int i, rc;
-    hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+    struct ide_hw hw, *hws[] = { &hw };
 
     if (!request_region(io, 8, DRV_NAME)) {
 	printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
@@ -181,10 +182,9 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
     memset(&hw, 0, sizeof(hw));
     ide_std_init_ports(&hw, io, ctl);
     hw.irq = irq;
-    hw.chipset = ide_pci;
     hw.dev = &handle->dev;
 
-    rc = ide_host_add(&idecs_port_info, hws, &host);
+    rc = ide_host_add(&idecs_port_info, hws, 1, &host);
     if (rc)
 	goto out_release;
 
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index a9fbe2c3121..6a1de216970 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -82,7 +82,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 					sector_t block)
 {
 	ide_hwif_t *hwif	= drive->hwif;
-	u16 nsectors		= (u16)rq->nr_sectors;
+	u16 nsectors		= (u16)blk_rq_sectors(rq);
 	u8 lba48		= !!(drive->dev_flags & IDE_DFLAG_LBA48);
 	u8 dma			= !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
 	struct ide_cmd		cmd;
@@ -90,7 +90,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 	ide_startstop_t		rc;
 
 	if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
-		if (block + rq->nr_sectors > 1ULL << 28)
+		if (block + blk_rq_sectors(rq) > 1ULL << 28)
 			dma = 0;
 		else
 			lba48 = 0;
@@ -195,9 +195,9 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 
 	ledtrig_ide_activity();
 
-	pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
+	pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n",
 		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
-		 (unsigned long long)block, rq->nr_sectors,
+		 (unsigned long long)block, blk_rq_sectors(rq),
 		 (unsigned long)rq->buffer);
 
 	if (hwif->rw_disk)
@@ -302,14 +302,12 @@ static const struct drive_list_entry hpa_list[] = {
 	{ NULL,		NULL }
 };
 
-static void idedisk_check_hpa(ide_drive_t *drive)
+static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
 {
-	unsigned long long capacity, set_max;
-	int lba48 = ata_id_lba48_enabled(drive->id);
+	u64 capacity, set_max;
 
 	capacity = drive->capacity64;
-
-	set_max = idedisk_read_native_max_address(drive, lba48);
+	set_max  = idedisk_read_native_max_address(drive, lba48);
 
 	if (ide_in_drive_list(drive->id, hpa_list)) {
 		/*
@@ -320,9 +318,31 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 			set_max--;
 	}
 
+	return set_max;
+}
+
+static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
+{
+	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if (set_max)
+		drive->capacity64 = set_max;
+
+	return set_max;
+}
+
+static void idedisk_check_hpa(ide_drive_t *drive)
+{
+	u64 capacity, set_max;
+	int lba48 = ata_id_lba48_enabled(drive->id);
+
+	capacity = drive->capacity64;
+	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
+
 	if (set_max <= capacity)
 		return;
 
+	drive->probed_capacity = set_max;
+
 	printk(KERN_INFO "%s: Host Protected Area detected.\n"
 			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
 			 "\tnative  capacity is %llu sectors (%llu MB)\n",
@@ -330,13 +350,13 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 			 capacity, sectors_to_MB(capacity),
 			 set_max, sectors_to_MB(set_max));
 
-	set_max = idedisk_set_max_address(drive, set_max, lba48);
+	if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
+		return;
 
-	if (set_max) {
-		drive->capacity64 = set_max;
+	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
+	if (set_max)
 		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
 				 drive->name);
-	}
 }
 
 static int ide_disk_get_capacity(ide_drive_t *drive)
@@ -358,6 +378,8 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
 		drive->capacity64 = drive->cyl * drive->head * drive->sect;
 	}
 
+	drive->probed_capacity = drive->capacity64;
+
 	if (lba) {
 		drive->dev_flags |= IDE_DFLAG_LBA;
 
@@ -376,7 +398,7 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
 		       "%llu sectors (%llu MB)\n",
 		       drive->name, (unsigned long long)drive->capacity64,
 		       sectors_to_MB(drive->capacity64));
-		drive->capacity64 = 1ULL << 28;
+		drive->probed_capacity = drive->capacity64 = 1ULL << 28;
 	}
 
 	if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
@@ -392,6 +414,34 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
 	return 0;
 }
 
+static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
+{
+	u64 set = min(capacity, drive->probed_capacity);
+	u16 *id = drive->id;
+	int lba48 = ata_id_lba48_enabled(id);
+
+	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
+	    ata_id_hpa_enabled(id) == 0)
+		goto out;
+
+	/*
+	 * according to the spec the SET MAX ADDRESS command shall be
+	 * immediately preceded by a READ NATIVE MAX ADDRESS command
+	 */
+	capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
+	if (capacity == 0)
+		goto out;
+
+	set = ide_disk_hpa_set_capacity(drive, set, lba48);
+	if (set) {
+		/* needed for ->resume to disable HPA */
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
+		return set;
+	}
+out:
+	return drive->capacity64;
+}
+
 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
 {
 	ide_drive_t *drive = q->queuedata;
@@ -411,7 +461,6 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
 	cmd->protocol = ATA_PROT_NODATA;
 
 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
-	rq->cmd_flags |= REQ_SOFTBARRIER;
 	rq->special = cmd;
 }
 
@@ -429,14 +478,14 @@ static int set_multcount(ide_drive_t *drive, int arg)
 	if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
 		return -EINVAL;
 
-	if (drive->special.b.set_multmode)
+	if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
 		return -EBUSY;
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
 
 	drive->mult_req = arg;
-	drive->special.b.set_multmode = 1;
+	drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 	error = blk_execute_rq(drive->queue, NULL, rq, 0);
 	blk_put_request(rq);
 
@@ -640,7 +689,7 @@ static void ide_disk_setup(ide_drive_t *drive)
 	}
 
 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
-		q->max_sectors / 2);
+	       queue_max_sectors(q) / 2);
 
 	if (ata_id_is_ssd(id))
 		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
@@ -741,6 +790,7 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
 
 const struct ide_disk_ops ide_ata_disk_ops = {
 	.check		= ide_disk_check,
+	.set_capacity	= ide_disk_set_capacity,
 	.get_capacity	= ide_disk_get_capacity,
 	.setup		= ide_disk_setup,
 	.flush		= ide_disk_flush,
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index a0b8cab1d9a..219e6fb78dc 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -103,7 +103,7 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive)
 				ide_finish_cmd(drive, cmd, stat);
 			else
 				ide_complete_rq(drive, 0,
-						cmd->rq->nr_sectors << 9);
+						blk_rq_sectors(cmd->rq) << 9);
 			return ide_stopped;
 		}
 		printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
@@ -347,7 +347,6 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
 
 	return mode;
 }
-EXPORT_SYMBOL_GPL(ide_find_dma_mode);
 
 static int ide_tune_dma(ide_drive_t *drive)
 {
@@ -510,23 +509,11 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
 	/*
 	 * un-busy drive etc and make sure request is sane
 	 */
-
 	rq = hwif->rq;
-	if (!rq)
-		goto out;
-
-	hwif->rq = NULL;
-
-	rq->errors = 0;
-
-	if (!rq->bio)
-		goto out;
-
-	rq->sector = rq->bio->bi_sector;
-	rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
-	rq->hard_cur_sectors = rq->current_nr_sectors;
-	rq->buffer = bio_data(rq->bio);
-out:
+	if (rq) {
+		hwif->rq = NULL;
+		rq->errors = 0;
+	}
 	return ret;
 }
 
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 5d5fb961b5c..2b914197961 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -52,7 +52,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq,
 	}
 
 	if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
-		drive->special.b.recalibrate = 1;
+		drive->special_flags |= IDE_SFLAG_RECALIBRATE;
 
 	++rq->errors;
 
@@ -268,9 +268,8 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
 {
 	int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;
 
-	drive->special.all = 0;
-	drive->special.b.set_geometry = legacy;
-	drive->special.b.recalibrate  = legacy;
+	drive->special_flags =
+		legacy ? (IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE) : 0;
 
 	drive->mult_count = 0;
 	drive->dev_flags &= ~IDE_DFLAG_PARKED;
@@ -280,7 +279,7 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
 		drive->mult_req = 0;
 
 	if (drive->mult_req != drive->mult_count)
-		drive->special.b.set_multmode = 1;
+		drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 }
 
 static void pre_reset(ide_drive_t *drive)
@@ -408,8 +407,9 @@ static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi)
 	/* more than enough time */
 	udelay(10);
 	/* clear SRST, leave nIEN (unless device is on the quirk list) */
-	tp_ops->write_devctl(hwif, (drive->quirk_list == 2 ? 0 : ATA_NIEN) |
-			     ATA_DEVCTL_OBS);
+	tp_ops->write_devctl(hwif,
+		((drive->dev_flags & IDE_DFLAG_NIEN_QUIRK) ? 0 : ATA_NIEN) |
+		 ATA_DEVCTL_OBS);
 	/* more than enough time */
 	udelay(10);
 	hwif->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 2b4868d95f8..650981758f1 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -134,13 +134,17 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
 	drive->pc = pc;
 
 	if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
+		unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
 		if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
 			ide_floppy_report_error(floppy, pc);
+
 		/* Giving up */
 		pc->error = IDE_DRV_ERROR_GENERAL;
 
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
+		ide_complete_rq(drive, -EIO, done);
 		return ide_stopped;
 	}
 
@@ -190,7 +194,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
 	int block = sector / floppy->bs_factor;
-	int blocks = rq->nr_sectors / floppy->bs_factor;
+	int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
 	int cmd = rq_data_dir(rq);
 
 	ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
@@ -216,16 +220,14 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
 	ide_init_pc(pc);
 	memcpy(pc->c, rq->cmd, sizeof(pc->c));
 	pc->rq = rq;
-	if (rq->data_len && rq_data_dir(rq) == WRITE)
-		pc->flags |= PC_FLAG_WRITING;
-	pc->buf = rq->data;
-	if (rq->bio)
+	if (blk_rq_bytes(rq)) {
 		pc->flags |= PC_FLAG_DMA_OK;
-	/*
-	 * possibly problematic, doesn't look like ide-floppy correctly
-	 * handled scattered requests if dma fails...
-	 */
-	pc->req_xfer = pc->buf_size = rq->data_len;
+		if (rq_data_dir(rq) == WRITE)
+			pc->flags |= PC_FLAG_WRITING;
+	}
+	/* pio will be performed by ide_pio_bytes() which handles sg fine */
+	pc->buf = NULL;
+	pc->req_xfer = pc->buf_size = blk_rq_bytes(rq);
 }
 
 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
@@ -257,16 +259,16 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 			goto out_end;
 	}
 	if (blk_fs_request(rq)) {
-		if (((long)rq->sector % floppy->bs_factor) ||
-		    (rq->nr_sectors % floppy->bs_factor)) {
+		if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
+		    (blk_rq_sectors(rq) % floppy->bs_factor)) {
 			printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
 				drive->name);
 			goto out_end;
 		}
 		pc = &floppy->queued_pc;
 		idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
-	} else if (blk_special_request(rq)) {
-		pc = (struct ide_atapi_pc *) rq->buffer;
+	} else if (blk_special_request(rq) || blk_sense_request(rq)) {
+		pc = (struct ide_atapi_pc *)rq->special;
 	} else if (blk_pc_request(rq)) {
 		pc = &floppy->queued_pc;
 		idefloppy_blockpc_cmd(floppy, pc, rq);
@@ -275,6 +277,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 		goto out_end;
 	}
 
+	ide_prep_sense(drive, rq);
+
 	memset(&cmd, 0, sizeof(cmd));
 
 	if (rq_data_dir(rq))
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 4b6b71e2cdf..214119026b3 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -287,6 +287,19 @@ static int ide_gd_media_changed(struct gendisk *disk)
 	return ret;
 }
 
+static unsigned long long ide_gd_set_capacity(struct gendisk *disk,
+					      unsigned long long capacity)
+{
+	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+	const struct ide_disk_ops *disk_ops = drive->disk_ops;
+
+	if (disk_ops->set_capacity)
+		return disk_ops->set_capacity(drive, capacity);
+
+	return drive->capacity64;
+}
+
 static int ide_gd_revalidate_disk(struct gendisk *disk)
 {
 	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
@@ -315,6 +328,7 @@ static struct block_device_operations ide_gd_ops = {
 	.locked_ioctl		= ide_gd_ioctl,
 	.getgeo			= ide_gd_getgeo,
 	.media_changed		= ide_gd_media_changed,
+	.set_capacity		= ide_gd_set_capacity,
 	.revalidate_disk	= ide_gd_revalidate_disk
 };
 
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 7812ca0be13..54d7c4685d2 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -29,6 +29,7 @@ MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
 
 static const struct ide_port_info ide_generic_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 #ifdef CONFIG_ARM
@@ -85,7 +86,7 @@ static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
 
 static int __init ide_generic_init(void)
 {
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	unsigned long io_addr;
 	int i, rc = 0, primary = 0, secondary = 0;
 
@@ -132,9 +133,7 @@ static int __init ide_generic_init(void)
 #else
 			hw.irq = legacy_irqs[i];
 #endif
-			hw.chipset = ide_generic;
-
-			rc = ide_host_add(&ide_generic_port_info, hws, NULL);
+			rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL);
 			if (rc) {
 				release_region(io_addr + 0x206, 1);
 				release_region(io_addr, 8);
diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c
index c06ebdc4a13..520f42c5445 100644
--- a/drivers/ide/ide-h8300.c
+++ b/drivers/ide/ide-h8300.c
@@ -64,26 +64,26 @@ static const struct ide_tp_ops h8300_tp_ops = {
 
 #define H8300_IDE_GAP (2)
 
-static inline void hw_setup(hw_regs_t *hw)
+static inline void hw_setup(struct ide_hw *hw)
 {
 	int i;
 
-	memset(hw, 0, sizeof(hw_regs_t));
+	memset(hw, 0, sizeof(*hw));
 	for (i = 0; i <= 7; i++)
 		hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i;
 	hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT;
 	hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ;
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info h8300_port_info = {
 	.tp_ops			= &h8300_tp_ops,
 	.host_flags		= IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int __init h8300_ide_init(void)
 {
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
 
@@ -96,7 +96,7 @@ static int __init h8300_ide_init(void)
 
 	hw_setup(&hw);
 
-	return ide_host_add(&h8300_port_info, hws, NULL);
+	return ide_host_add(&h8300_port_info, hws, 1, NULL);
 
 out_busy:
 	printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 35dc38d3b2c..272cc38f6db 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -116,9 +116,9 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
 unsigned int ide_rq_bytes(struct request *rq)
 {
 	if (blk_pc_request(rq))
-		return rq->data_len;
+		return blk_rq_bytes(rq);
 	else
-		return rq->hard_cur_sectors << 9;
+		return blk_rq_cur_sectors(rq) << 9;
 }
 EXPORT_SYMBOL_GPL(ide_rq_bytes);
 
@@ -133,7 +133,7 @@ int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
 	 * and complete the whole request right now
 	 */
 	if (blk_noretry_request(rq) && error <= 0)
-		nr_bytes = rq->hard_nr_sectors << 9;
+		nr_bytes = blk_rq_sectors(rq) << 9;
 
 	rc = ide_end_rq(drive, rq, error, nr_bytes);
 	if (rc == 0)
@@ -184,29 +184,42 @@ static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 	tf->command = ATA_CMD_SET_MULTI;
 }
 
-static ide_startstop_t ide_disk_special(ide_drive_t *drive)
+/**
+ *	do_special		-	issue some special commands
+ *	@drive: drive the command is for
+ *
+ *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
+ *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
+ */
+
+static ide_startstop_t do_special(ide_drive_t *drive)
 {
-	special_t *s = &drive->special;
 	struct ide_cmd cmd;
 
+#ifdef DEBUG
+	printk(KERN_DEBUG "%s: %s: 0x%02x\n", drive->name, __func__,
+		drive->special_flags);
+#endif
+	if (drive->media != ide_disk) {
+		drive->special_flags = 0;
+		drive->mult_req = 0;
+		return ide_stopped;
+	}
+
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.protocol = ATA_PROT_NODATA;
 
-	if (s->b.set_geometry) {
-		s->b.set_geometry = 0;
+	if (drive->special_flags & IDE_SFLAG_SET_GEOMETRY) {
+		drive->special_flags &= ~IDE_SFLAG_SET_GEOMETRY;
 		ide_tf_set_specify_cmd(drive, &cmd.tf);
-	} else if (s->b.recalibrate) {
-		s->b.recalibrate = 0;
+	} else if (drive->special_flags & IDE_SFLAG_RECALIBRATE) {
+		drive->special_flags &= ~IDE_SFLAG_RECALIBRATE;
 		ide_tf_set_restore_cmd(drive, &cmd.tf);
-	} else if (s->b.set_multmode) {
-		s->b.set_multmode = 0;
+	} else if (drive->special_flags & IDE_SFLAG_SET_MULTMODE) {
+		drive->special_flags &= ~IDE_SFLAG_SET_MULTMODE;
 		ide_tf_set_setmult_cmd(drive, &cmd.tf);
-	} else if (s->all) {
-		int special = s->all;
-		s->all = 0;
-		printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
-		return ide_stopped;
-	}
+	} else
+		BUG();
 
 	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
 	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
@@ -217,45 +230,13 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
 	return ide_started;
 }
 
-/**
- *	do_special		-	issue some special commands
- *	@drive: drive the command is for
- *
- *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
- *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
- *
- *	It used to do much more, but has been scaled back.
- */
-
-static ide_startstop_t do_special (ide_drive_t *drive)
-{
-	special_t *s = &drive->special;
-
-#ifdef DEBUG
-	printk("%s: do_special: 0x%02x\n", drive->name, s->all);
-#endif
-	if (drive->media == ide_disk)
-		return ide_disk_special(drive);
-
-	s->all = 0;
-	drive->mult_req = 0;
-	return ide_stopped;
-}
-
 void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 	struct request *rq = cmd->rq;
 
-	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
-		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
-		cmd->sg_nents = 1;
-	} else if (!rq->bio) {
-		sg_init_one(sg, rq->data, rq->data_len);
-		cmd->sg_nents = 1;
-	} else
-		cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
+	cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 }
 EXPORT_SYMBOL_GPL(ide_map_sg);
 
@@ -286,7 +267,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
 
 	if (cmd) {
 		if (cmd->protocol == ATA_PROT_PIO) {
-			ide_init_sg_cmd(cmd, rq->nr_sectors << 9);
+			ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9);
 			ide_map_sg(drive, cmd);
 		}
 
@@ -358,7 +339,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 		printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
 		return startstop;
 	}
-	if (!drive->special.all) {
+
+	if (drive->special_flags == 0) {
 		struct ide_driver *drv;
 
 		/*
@@ -371,7 +353,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 		if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
 			return execute_drive_cmd(drive, rq);
 		else if (blk_pm_request(rq)) {
-			struct request_pm_state *pm = rq->data;
+			struct request_pm_state *pm = rq->special;
 #ifdef DEBUG_PM
 			printk("%s: start_power_step(step: %d)\n",
 				drive->name, pm->pm_step);
@@ -394,7 +376,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 
 		drv = *(struct ide_driver **)rq->rq_disk->private_data;
 
-		return drv->do_request(drive, rq, rq->sector);
+		return drv->do_request(drive, rq, blk_rq_pos(rq));
 	}
 	return do_special(drive);
 kill_rq:
@@ -484,6 +466,9 @@ void do_ide_request(struct request_queue *q)
 
 	spin_unlock_irq(q->queue_lock);
 
+	/* HLD do_request() callback might sleep, make sure it's okay */
+	might_sleep();
+
 	if (ide_lock_host(host, hwif))
 		goto plug_device_2;
 
@@ -491,10 +476,10 @@ void do_ide_request(struct request_queue *q)
 
 	if (!ide_lock_port(hwif)) {
 		ide_hwif_t *prev_port;
+
+		WARN_ON_ONCE(hwif->rq);
 repeat:
 		prev_port = hwif->host->cur_port;
-		hwif->rq = NULL;
-
 		if (drive->dev_flags & IDE_DFLAG_SLEEPING &&
 		    time_after(drive->sleep, jiffies)) {
 			ide_unlock_port(hwif);
@@ -503,11 +488,15 @@ repeat:
 
 		if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) &&
 		    hwif != prev_port) {
+			ide_drive_t *cur_dev =
+				prev_port ? prev_port->cur_dev : NULL;
+
 			/*
 			 * set nIEN for previous port, drives in the
-			 * quirk_list may not like intr setups/cleanups
+			 * quirk list may not like intr setups/cleanups
 			 */
-			if (prev_port && prev_port->cur_dev->quirk_list == 0)
+			if (cur_dev &&
+			    (cur_dev->dev_flags & IDE_DFLAG_NIEN_QUIRK) == 0)
 				prev_port->tp_ops->write_devctl(prev_port,
 								ATA_NIEN |
 								ATA_DEVCTL_OBS);
@@ -523,7 +512,9 @@ repeat:
 		 * we know that the queue isn't empty, but this can happen
 		 * if the q->prep_rq_fn() decides to kill a request
 		 */
-		rq = elv_next_request(drive->queue);
+		if (!rq)
+			rq = blk_fetch_request(drive->queue);
+
 		spin_unlock_irq(q->queue_lock);
 		spin_lock_irq(&hwif->lock);
 
@@ -535,7 +526,7 @@ repeat:
 		/*
 		 * Sanity: don't accept a request that isn't a PM request
 		 * if we are currently power managed. This is very important as
-		 * blk_stop_queue() doesn't prevent the elv_next_request()
+		 * blk_stop_queue() doesn't prevent the blk_fetch_request()
 		 * above to return us whatever is in the queue. Since we call
 		 * ide_do_request() ourselves, we end up taking requests while
 		 * the queue is blocked...
@@ -559,8 +550,11 @@ repeat:
 		startstop = start_request(drive, rq);
 		spin_lock_irq(&hwif->lock);
 
-		if (startstop == ide_stopped)
+		if (startstop == ide_stopped) {
+			rq = hwif->rq;
+			hwif->rq = NULL;
 			goto repeat;
+		}
 	} else
 		goto plug_device;
 out:
@@ -576,18 +570,24 @@ plug_device:
 plug_device_2:
 	spin_lock_irq(q->queue_lock);
 
+	if (rq)
+		blk_requeue_request(q, rq);
 	if (!elv_queue_empty(q))
 		blk_plug_device(q);
 }
 
-static void ide_plug_device(ide_drive_t *drive)
+static void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
 {
 	struct request_queue *q = drive->queue;
 	unsigned long flags;
 
 	spin_lock_irqsave(q->queue_lock, flags);
+
+	if (rq)
+		blk_requeue_request(q, rq);
 	if (!elv_queue_empty(q))
 		blk_plug_device(q);
+
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 
@@ -636,6 +636,7 @@ void ide_timer_expiry (unsigned long data)
 	unsigned long	flags;
 	int		wait = -1;
 	int		plug_device = 0;
+	struct request	*uninitialized_var(rq_in_flight);
 
 	spin_lock_irqsave(&hwif->lock, flags);
 
@@ -696,7 +697,9 @@ void ide_timer_expiry (unsigned long data)
 		}
 		spin_lock_irq(&hwif->lock);
 		enable_irq(hwif->irq);
-		if (startstop == ide_stopped) {
+		if (startstop == ide_stopped && hwif->polling == 0) {
+			rq_in_flight = hwif->rq;
+			hwif->rq = NULL;
 			ide_unlock_port(hwif);
 			plug_device = 1;
 		}
@@ -705,7 +708,7 @@ void ide_timer_expiry (unsigned long data)
 
 	if (plug_device) {
 		ide_unlock_host(hwif->host);
-		ide_plug_device(drive);
+		ide_requeue_and_plug(drive, rq_in_flight);
 	}
 }
 
@@ -791,6 +794,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 	ide_startstop_t startstop;
 	irqreturn_t irq_ret = IRQ_NONE;
 	int plug_device = 0;
+	struct request *uninitialized_var(rq_in_flight);
 
 	if (host->host_flags & IDE_HFLAG_SERIALIZE) {
 		if (hwif != host->cur_port)
@@ -868,8 +872,10 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 	 * same irq as is currently being serviced here, and Linux
 	 * won't allow another of the same (on any CPU) until we return.
 	 */
-	if (startstop == ide_stopped) {
+	if (startstop == ide_stopped && hwif->polling == 0) {
 		BUG_ON(hwif->handler);
+		rq_in_flight = hwif->rq;
+		hwif->rq = NULL;
 		ide_unlock_port(hwif);
 		plug_device = 1;
 	}
@@ -879,7 +885,7 @@ out:
 out_early:
 	if (plug_device) {
 		ide_unlock_host(hwif->host);
-		ide_plug_device(drive);
+		ide_requeue_and_plug(drive, rq_in_flight);
 	}
 
 	return irq_ret;
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index c1c25ebbaa1..5991b23793f 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -231,7 +231,6 @@ static int generic_drive_reset(ide_drive_t *drive)
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd_len = 1;
 	rq->cmd[0] = REQ_DRIVE_RESET;
-	rq->cmd_flags |= REQ_SOFTBARRIER;
 	if (blk_execute_rq(drive->queue, NULL, rq, 1))
 		ret = rq->errors;
 	blk_put_request(rq);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c19a221b1e1..fa047150a1c 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
 
 /*
  * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
  * Some optical devices with the buggy firmwares have the same problem.
  */
 static const struct drive_list_entry ivb_list[] = {
@@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive)
 	 * - force bit13 (80c cable present) check also for !ivb devices
 	 *   (unless the slave device is pre-ATA3)
 	 */
-	if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
-	    (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+	if (id[ATA_ID_HW_CONFIG] & 0x4000)
 		return 1;
 
+	if (ivb) {
+		const char *model = (char *)&id[ATA_ID_PROD];
+
+		if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+			/*
+			 * These ATAPI devices always report 80c cable
+			 * so we have to depend on the host in this case.
+			 */
+			if (hwif->cbl == ATA_CBL_PATA80)
+				return 1;
+		} else {
+			/* Depend on the device side cable detection. */
+			if (id[ATA_ID_HW_CONFIG] & 0x2000)
+				return 1;
+		}
+	}
 no_80w:
 	if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
 		return 0;
@@ -269,6 +282,29 @@ no_80w:
 	return 0;
 }
 
+static const char *nien_quirk_list[] = {
+	"QUANTUM FIREBALLlct08 08",
+	"QUANTUM FIREBALLP KA6.4",
+	"QUANTUM FIREBALLP KA9.1",
+	"QUANTUM FIREBALLP KX13.6",
+	"QUANTUM FIREBALLP KX20.5",
+	"QUANTUM FIREBALLP KX27.3",
+	"QUANTUM FIREBALLP LM20.4",
+	"QUANTUM FIREBALLP LM20.5",
+	NULL
+};
+
+void ide_check_nien_quirk_list(ide_drive_t *drive)
+{
+	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
+
+	for (list = nien_quirk_list; *list != NULL; list++)
+		if (strstr(m, *list) != NULL) {
+			drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK;
+			return;
+		}
+}
+
 int ide_driveid_update(ide_drive_t *drive)
 {
 	u16 *id;
@@ -298,7 +334,6 @@ int ide_driveid_update(ide_drive_t *drive)
 
 	return 1;
 out_err:
-	SELECT_MASK(drive, 0);
 	if (rc == 2)
 		printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__);
 	kfree(id);
@@ -352,7 +387,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 
 	tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
 
-	if (drive->quirk_list == 2)
+	if (drive->dev_flags & IDE_DFLAG_NIEN_QUIRK)
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c
index 8c5dcbf2254..b9654a7bb7b 100644
--- a/drivers/ide/ide-legacy.c
+++ b/drivers/ide/ide-legacy.c
@@ -1,7 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
 
-static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
+static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw,
 				u8 port_no, const struct ide_port_info *d,
 				unsigned long config)
 {
@@ -33,7 +33,6 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
 
 	ide_std_init_ports(hw, base, ctl);
 	hw->irq = irq;
-	hw->chipset = d->chipset;
 	hw->config = config;
 
 	hws[port_no] = hw;
@@ -41,7 +40,7 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
 
 int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 {
-	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+	struct ide_hw hw[2], *hws[] = { NULL, NULL };
 
 	memset(&hw, 0, sizeof(hw));
 
@@ -53,6 +52,6 @@ int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 	    (d->host_flags & IDE_HFLAG_SINGLE))
 		return -ENOENT;
 
-	return ide_host_add(d, hws, NULL);
+	return ide_host_add(d, hws, 2, NULL);
 }
 EXPORT_SYMBOL_GPL(ide_legacy_device_add);
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 56ff8c46c7d..e386a32dc9b 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
 		blk_queue_bounce_limit(drive->queue, addr);
 }
 
-static void ide_dump_opcode(ide_drive_t *drive)
-{
-	struct request *rq = drive->hwif->rq;
-	struct ide_cmd *cmd = NULL;
-
-	if (!rq)
-		return;
-
-	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
-		cmd = rq->special;
-
-	printk(KERN_ERR "ide: failed opcode was: ");
-	if (cmd == NULL)
-		printk(KERN_CONT "unknown\n");
-	else
-		printk(KERN_CONT "0x%02x\n", cmd->tf.command);
-}
-
 u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48)
 {
 	struct ide_taskfile *tf = &cmd->tf;
@@ -91,7 +73,7 @@ static void ide_dump_sector(ide_drive_t *drive)
 
 static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
 {
-	printk(KERN_ERR "{ ");
+	printk(KERN_CONT "{ ");
 	if (err & ATA_ABORTED)
 		printk(KERN_CONT "DriveStatusError ");
 	if (err & ATA_ICRC)
@@ -114,14 +96,14 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
 
 		if (rq)
 			printk(KERN_CONT ", sector=%llu",
-			       (unsigned long long)rq->sector);
+			       (unsigned long long)blk_rq_pos(rq));
 	}
 	printk(KERN_CONT "\n");
 }
 
 static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
 {
-	printk(KERN_ERR "{ ");
+	printk(KERN_CONT "{ ");
 	if (err & ATAPI_ILI)
 		printk(KERN_CONT "IllegalLengthIndication ");
 	if (err & ATAPI_EOM)
@@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
 		else
 			ide_dump_atapi_error(drive, err);
 	}
-	ide_dump_opcode(drive);
+
+	printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n",
+		drive->name, drive->hwif->cmd.tf.command);
+
 	return err;
 }
 EXPORT_SYMBOL(ide_dump_status);
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
index 310d03f2b5b..a914023d6d0 100644
--- a/drivers/ide/ide-park.c
+++ b/drivers/ide/ide-park.c
@@ -24,11 +24,8 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
 			start_queue = 1;
 		spin_unlock_irq(&hwif->lock);
 
-		if (start_queue) {
-			spin_lock_irq(q->queue_lock);
-			blk_start_queueing(q);
-			spin_unlock_irq(q->queue_lock);
-		}
+		if (start_queue)
+			blk_run_queue(q);
 		return;
 	}
 	spin_unlock_irq(&hwif->lock);
diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c
index 61111fd2713..39d4e01f5c9 100644
--- a/drivers/ide/ide-pci-generic.c
+++ b/drivers/ide/ide-pci-generic.c
@@ -33,6 +33,16 @@ static int ide_generic_all;		/* Set to claim all devices */
 module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
 MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
 
+static void netcell_quirkproc(ide_drive_t *drive)
+{
+	/* mark words 85-87 as valid */
+	drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+}
+
+static const struct ide_port_ops netcell_port_ops = {
+	.quirkproc		= netcell_quirkproc,
+};
+
 #define DECLARE_GENERIC_PCI_DEV(extra_flags) \
 	{ \
 		.name		= DRV_NAME, \
@@ -74,6 +84,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
 
 	{	/* 6: Revolution */
 		.name		= DRV_NAME,
+		.port_ops	= &netcell_port_ops,
 		.host_flags	= IDE_HFLAG_CLEAR_SIMPLEX |
 				  IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 				  IDE_HFLAG_OFF_BOARD,
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 0d8a151c0a0..ba1488bd843 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -7,7 +7,6 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq;
 	struct request_pm_state rqpm;
-	struct ide_cmd cmd;
 	int ret;
 
 	/* call ACPI _GTM only once */
@@ -15,11 +14,9 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 		ide_acpi_get_timing(hwif);
 
 	memset(&rqpm, 0, sizeof(rqpm));
-	memset(&cmd, 0, sizeof(cmd));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_PM_SUSPEND;
-	rq->special = &cmd;
-	rq->data = &rqpm;
+	rq->special = &rqpm;
 	rqpm.pm_step = IDE_PM_START_SUSPEND;
 	if (mesg.event == PM_EVENT_PRETHAW)
 		mesg.event = PM_EVENT_FREEZE;
@@ -41,7 +38,6 @@ int generic_ide_resume(struct device *dev)
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq;
 	struct request_pm_state rqpm;
-	struct ide_cmd cmd;
 	int err;
 
 	/* call ACPI _PS0 / _STM only once */
@@ -53,12 +49,10 @@ int generic_ide_resume(struct device *dev)
 	ide_acpi_exec_tfs(drive);
 
 	memset(&rqpm, 0, sizeof(rqpm));
-	memset(&cmd, 0, sizeof(cmd));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_PM_RESUME;
 	rq->cmd_flags |= REQ_PREEMPT;
-	rq->special = &cmd;
-	rq->data = &rqpm;
+	rq->special = &rqpm;
 	rqpm.pm_step = IDE_PM_START_RESUME;
 	rqpm.pm_state = PM_EVENT_ON;
 
@@ -77,7 +71,7 @@ int generic_ide_resume(struct device *dev)
 
 void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 {
-	struct request_pm_state *pm = rq->data;
+	struct request_pm_state *pm = rq->special;
 
 #ifdef DEBUG_PM
 	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
@@ -107,10 +101,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 
 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 {
-	struct request_pm_state *pm = rq->data;
-	struct ide_cmd *cmd = rq->special;
-
-	memset(cmd, 0, sizeof(*cmd));
+	struct request_pm_state *pm = rq->special;
+	struct ide_cmd cmd = { };
 
 	switch (pm->pm_step) {
 	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
@@ -123,12 +115,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 			return ide_stopped;
 		}
 		if (ata_id_flush_ext_enabled(drive->id))
-			cmd->tf.command = ATA_CMD_FLUSH_EXT;
+			cmd.tf.command = ATA_CMD_FLUSH_EXT;
 		else
-			cmd->tf.command = ATA_CMD_FLUSH;
+			cmd.tf.command = ATA_CMD_FLUSH;
 		goto out_do_tf;
 	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
-		cmd->tf.command = ATA_CMD_STANDBYNOW1;
+		cmd.tf.command = ATA_CMD_STANDBYNOW1;
 		goto out_do_tf;
 	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
 		ide_set_max_pio(drive);
@@ -141,7 +133,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 			ide_complete_power_step(drive, rq);
 		return ide_stopped;
 	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
-		cmd->tf.command = ATA_CMD_IDLEIMMEDIATE;
+		cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
 		goto out_do_tf;
 	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
 		/*
@@ -163,11 +155,11 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 	return ide_stopped;
 
 out_do_tf:
-	cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-	cmd->valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-	cmd->protocol = ATA_PROT_NODATA;
+	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
+	cmd.protocol = ATA_PROT_NODATA;
 
-	return do_rw_taskfile(drive, cmd);
+	return do_rw_taskfile(drive, &cmd);
 }
 
 /**
@@ -181,7 +173,7 @@ out_do_tf:
 void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
 {
 	struct request_queue *q = drive->queue;
-	struct request_pm_state *pm = rq->data;
+	struct request_pm_state *pm = rq->special;
 	unsigned long flags;
 
 	ide_complete_power_step(drive, rq);
@@ -207,7 +199,7 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
 
 void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 {
-	struct request_pm_state *pm = rq->data;
+	struct request_pm_state *pm = rq->special;
 
 	if (blk_pm_suspend_request(rq) &&
 	    pm->pm_step == IDE_PM_START_SUSPEND)
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 6e80b774e88..017b1df3b80 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -29,6 +29,7 @@ static struct pnp_device_id idepnp_devices[] = {
 
 static const struct ide_port_info ide_pnp_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
@@ -36,7 +37,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	struct ide_host *host;
 	unsigned long base, ctl;
 	int rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
 
@@ -62,9 +63,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	memset(&hw, 0, sizeof(hw));
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = pnp_irq(dev, 0);
-	hw.chipset = ide_generic;
 
-	rc = ide_host_add(&ide_pnp_port_info, hws, &host);
+	rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host);
 	if (rc)
 		goto out;
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 7f264ed1141..f371b0de314 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -97,7 +97,7 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
 		drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
 
 		if (drive->mult_req)
-			drive->special.b.set_multmode = 1;
+			drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
 	}
 }
 
@@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
 
 	timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
 
-	if (ide_busy_sleep(hwif, timeout, use_altstatus))
+	if (ide_busy_sleep(drive, timeout, use_altstatus))
 		return 1;
 
 	/* wait for IRQ and ATA_DRQ */
@@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
 	return rc;
 }
 
-int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
+int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	u8 stat;
 
 	timeout += jiffies;
@@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
 			return 0;
 	} while (time_before(jiffies, timeout));
 
+	printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__);
+
 	return 1;	/* drive timed-out */
 }
 
@@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			tp_ops->dev_select(drive);
 			msleep(50);
 			tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
-			(void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
+			(void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0);
 			rc = ide_dev_read_id(drive, cmd, id);
 		}
 
@@ -462,23 +465,8 @@ static u8 probe_for_drive(ide_drive_t *drive)
 	int rc;
 	u8 cmd;
 
-	/*
-	 *	In order to keep things simple we have an id
-	 *	block for all drives at all times. If the device
-	 *	is pre ATA or refuses ATA/ATAPI identify we
-	 *	will add faked data to this.
-	 *
-	 *	Also note that 0 everywhere means "can't do X"
-	 */
- 
 	drive->dev_flags &= ~IDE_DFLAG_ID_READ;
 
-	drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
-	if (drive->id == NULL) {
-		printk(KERN_ERR "ide: out of memory for id data.\n");
-		return 0;
-	}
-
 	m = (char *)&drive->id[ATA_ID_PROD];
 	strcpy(m, "UNKNOWN");
 
@@ -494,7 +482,7 @@ static u8 probe_for_drive(ide_drive_t *drive)
 		}
 
 		if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-			goto out_free;
+			return 0;
 
 		/* identification failed? */
 		if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -518,7 +506,7 @@ static u8 probe_for_drive(ide_drive_t *drive)
 	}
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-		goto out_free;
+		return 0;
 
 	/* The drive wasn't being helpful. Add generic info only */
 	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -532,9 +520,6 @@ static u8 probe_for_drive(ide_drive_t *drive)
 	}
 
 	return 1;
-out_free:
-	kfree(drive->id);
-	return 0;
 }
 
 static void hwif_release_dev(struct device *dev)
@@ -699,8 +684,14 @@ static int ide_probe_port(ide_hwif_t *hwif)
 	if (irqd)
 		disable_irq(hwif->irq);
 
-	if (ide_port_wait_ready(hwif) == -EBUSY)
-		printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
+	rc = ide_port_wait_ready(hwif);
+	if (rc == -ENODEV) {
+		printk(KERN_INFO "%s: no devices on the port\n", hwif->name);
+		goto out;
+	} else if (rc == -EBUSY)
+		printk(KERN_ERR "%s: not ready before the probe\n", hwif->name);
+	else
+		rc = -ENODEV;
 
 	/*
 	 * Second drive should only exist if first drive was found,
@@ -711,7 +702,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
 		if (drive->dev_flags & IDE_DFLAG_PRESENT)
 			rc = 0;
 	}
-
+out:
 	/*
 	 * Use cached IRQ number. It might be (and is...) changed by probe
 	 * code above
@@ -729,6 +720,8 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
 	int i;
 
 	ide_port_for_each_present_dev(i, drive, hwif) {
+		ide_check_nien_quirk_list(drive);
+
 		if (port_ops && port_ops->quirkproc)
 			port_ops->quirkproc(drive);
 	}
@@ -814,8 +807,6 @@ static int ide_port_setup_devices(ide_hwif_t *hwif)
 		if (ide_init_queue(drive)) {
 			printk(KERN_ERR "ide: failed to init %s\n",
 					drive->name);
-			kfree(drive->id);
-			drive->id = NULL;
 			drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 			continue;
 		}
@@ -944,9 +935,6 @@ static void drive_release_dev (struct device *dev)
 	blk_cleanup_queue(drive->queue);
 	drive->queue = NULL;
 
-	kfree(drive->id);
-	drive->id = NULL;
-
 	drive->dev_flags &= ~IDE_DFLAG_PRESENT;
 
 	complete(&drive->gendev_rel_comp);
@@ -1032,6 +1020,15 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
 		if (port_ops && port_ops->init_dev)
 			port_ops->init_dev(drive);
 	}
+
+	ide_port_for_each_dev(i, drive, hwif) {
+		/*
+		 * default to PIO Mode 0 before we figure out
+		 * the most suited mode for the attached device
+		 */
+		if (port_ops && port_ops->set_pio_mode)
+			port_ops->set_pio_mode(drive, 0);
+	}
 }
 
 static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
@@ -1039,8 +1036,7 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
 {
 	hwif->channel = port;
 
-	if (d->chipset)
-		hwif->chipset = d->chipset;
+	hwif->chipset = d->chipset ? d->chipset : ide_pci;
 
 	if (d->init_iops)
 		d->init_iops(hwif);
@@ -1121,16 +1117,19 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
 
 	ide_port_for_each_dev(i, drive, hwif) {
 		u8 j = (hwif->index * MAX_DRIVES) + i;
+		u16 *saved_id = drive->id;
 
 		memset(drive, 0, sizeof(*drive));
+		memset(saved_id, 0, SECTOR_SIZE);
+		drive->id = saved_id;
 
 		drive->media			= ide_disk;
 		drive->select			= (i << 4) | ATA_DEVICE_OBS;
 		drive->hwif			= hwif;
 		drive->ready_stat		= ATA_DRDY;
 		drive->bad_wstat		= BAD_W_STAT;
-		drive->special.b.recalibrate	= 1;
-		drive->special.b.set_geometry	= 1;
+		drive->special_flags		= IDE_SFLAG_RECALIBRATE |
+						  IDE_SFLAG_SET_GEOMETRY;
 		drive->name[0]			= 'h';
 		drive->name[1]			= 'd';
 		drive->name[2]			= 'a' + j;
@@ -1165,11 +1164,10 @@ static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
 	ide_port_init_devices_data(hwif);
 }
 
-static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
+static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
 {
 	memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
 	hwif->irq = hw->irq;
-	hwif->chipset = hw->chipset;
 	hwif->dev = hw->dev;
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
 	hwif->ack_intr = hw->ack_intr;
@@ -1230,8 +1228,10 @@ static void ide_port_free_devices(ide_hwif_t *hwif)
 	ide_drive_t *drive;
 	int i;
 
-	ide_port_for_each_dev(i, drive, hwif)
+	ide_port_for_each_dev(i, drive, hwif) {
+		kfree(drive->id);
 		kfree(drive);
+	}
 }
 
 static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
@@ -1245,6 +1245,18 @@ static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
 		if (drive == NULL)
 			goto out_nomem;
 
+		/*
+		 * In order to keep things simple we have an id
+		 * block for all drives at all times. If the device
+		 * is pre ATA or refuses ATA/ATAPI identify we
+		 * will add faked data to this.
+		 *
+		 * Also note that 0 everywhere means "can't do X"
+		 */
+		drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+		if (drive->id == NULL)
+			goto out_nomem;
+
 		hwif->devices[i] = drive;
 	}
 	return 0;
@@ -1254,7 +1266,8 @@ out_nomem:
 	return -ENOMEM;
 }
 
-struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
+struct ide_host *ide_host_alloc(const struct ide_port_info *d,
+				struct ide_hw **hws, unsigned int n_ports)
 {
 	struct ide_host *host;
 	struct device *dev = hws[0] ? hws[0]->dev : NULL;
@@ -1265,7 +1278,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 	if (host == NULL)
 		return NULL;
 
-	for (i = 0; i < MAX_HOST_PORTS; i++) {
+	for (i = 0; i < n_ports; i++) {
 		ide_hwif_t *hwif;
 		int idx;
 
@@ -1285,6 +1298,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 		if (idx < 0) {
 			printk(KERN_ERR "%s: no free slot for interface\n",
 					d ? d->name : "ide");
+			ide_port_free_devices(hwif);
 			kfree(hwif);
 			continue;
 		}
@@ -1341,7 +1355,7 @@ static void ide_disable_port(ide_hwif_t *hwif)
 }
 
 int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
-		      hw_regs_t **hws)
+		      struct ide_hw **hws)
 {
 	ide_hwif_t *hwif, *mate = NULL;
 	int i, j = 0;
@@ -1435,13 +1449,13 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 }
 EXPORT_SYMBOL_GPL(ide_host_register);
 
-int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
-		 struct ide_host **hostp)
+int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws,
+		 unsigned int n_ports, struct ide_host **hostp)
 {
 	struct ide_host *host;
 	int rc;
 
-	host = ide_host_alloc(d, hws);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index cb942a9b580..4b447a8a49d 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -131,13 +131,6 @@ enum {
 	IDETAPE_DIR_WRITE = (1 << 2),
 };
 
-struct idetape_bh {
-	u32 b_size;
-	atomic_t b_count;
-	struct idetape_bh *b_reqnext;
-	char *b_data;
-};
-
 /* Tape door status */
 #define DOOR_UNLOCKED			0
 #define DOOR_LOCKED			1
@@ -219,18 +212,12 @@ typedef struct ide_tape_obj {
 
 	/* Data buffer size chosen based on the tape's recommendation */
 	int buffer_size;
-	/* merge buffer */
-	struct idetape_bh *merge_bh;
-	/* size of the merge buffer */
-	int merge_bh_size;
-	/* pointer to current buffer head within the merge buffer */
-	struct idetape_bh *bh;
-	char *b_data;
-	int b_count;
-
-	int pages_per_buffer;
-	/* Wasted space in each stage */
-	int excess_bh_size;
+	/* Staging buffer of buffer_size bytes */
+	void *buf;
+	/* The read/write cursor */
+	void *cur;
+	/* The number of valid bytes in buf */
+	size_t valid;
 
 	/* Measures average tape speed */
 	unsigned long avg_time;
@@ -253,18 +240,27 @@ static struct class *idetape_sysfs_class;
 
 static void ide_tape_release(struct device *);
 
-static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
+static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
+
+static struct ide_tape_obj *ide_tape_get(struct gendisk *disk, bool cdev,
+					 unsigned int i)
 {
 	struct ide_tape_obj *tape = NULL;
 
 	mutex_lock(&idetape_ref_mutex);
-	tape = ide_drv_g(disk, ide_tape_obj);
+
+	if (cdev)
+		tape = idetape_devs[i];
+	else
+		tape = ide_drv_g(disk, ide_tape_obj);
+
 	if (tape) {
 		if (ide_device_get(tape->drive))
 			tape = NULL;
 		else
 			get_device(&tape->dev);
 	}
+
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
 }
@@ -280,102 +276,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 }
 
 /*
- * The variables below are used for the character device interface. Additional
- * state variables are defined in our ide_drive_t structure.
- */
-static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-
-static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
-{
-	struct ide_tape_obj *tape = NULL;
-
-	mutex_lock(&idetape_ref_mutex);
-	tape = idetape_devs[i];
-	if (tape)
-		get_device(&tape->dev);
-	mutex_unlock(&idetape_ref_mutex);
-	return tape;
-}
-
-static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-				  unsigned int bcount)
-{
-	struct idetape_bh *bh = pc->bh;
-	int count;
-
-	while (bcount) {
-		if (bh == NULL)
-			break;
-		count = min(
-			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
-			bcount);
-		drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data +
-					atomic_read(&bh->b_count), count);
-		bcount -= count;
-		atomic_add(count, &bh->b_count);
-		if (atomic_read(&bh->b_count) == bh->b_size) {
-			bh = bh->b_reqnext;
-			if (bh)
-				atomic_set(&bh->b_count, 0);
-		}
-	}
-
-	pc->bh = bh;
-
-	return bcount;
-}
-
-static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-				   unsigned int bcount)
-{
-	struct idetape_bh *bh = pc->bh;
-	int count;
-
-	while (bcount) {
-		if (bh == NULL)
-			break;
-		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
-		drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
-		bcount -= count;
-		pc->b_data += count;
-		pc->b_count -= count;
-		if (!pc->b_count) {
-			bh = bh->b_reqnext;
-			pc->bh = bh;
-			if (bh) {
-				pc->b_data = bh->b_data;
-				pc->b_count = atomic_read(&bh->b_count);
-			}
-		}
-	}
-
-	return bcount;
-}
-
-static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
-	struct idetape_bh *bh = pc->bh;
-	int count;
-	unsigned int bcount = pc->xferred;
-
-	if (pc->flags & PC_FLAG_WRITING)
-		return;
-	while (bcount) {
-		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
-					__func__);
-			return;
-		}
-		count = min((unsigned int)bh->b_size, (unsigned int)bcount);
-		atomic_set(&bh->b_count, count);
-		if (atomic_read(&bh->b_count) == bh->b_size)
-			bh = bh->b_reqnext;
-		bcount -= count;
-	}
-	pc->bh = bh;
-}
-
-/*
  * called on each failed packet command retry to analyze the request sense. We
  * currently do not utilize this information.
  */
@@ -392,12 +292,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
 	/* Correct pc->xferred by asking the tape.	 */
-	if (pc->flags & PC_FLAG_DMA_ERROR) {
+	if (pc->flags & PC_FLAG_DMA_ERROR)
 		pc->xferred = pc->req_xfer -
 			tape->blk_size *
 			get_unaligned_be32(&sense[3]);
-		idetape_update_buffers(drive, pc);
-	}
 
 	/*
 	 * If error was the result of a zero-length read or write command,
@@ -436,29 +334,6 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	}
 }
 
-/* Free data buffers completely. */
-static void ide_tape_kfree_buffer(idetape_tape_t *tape)
-{
-	struct idetape_bh *prev_bh, *bh = tape->merge_bh;
-
-	while (bh) {
-		u32 size = bh->b_size;
-
-		while (size) {
-			unsigned int order = fls(size >> PAGE_SHIFT)-1;
-
-			if (bh->b_data)
-				free_pages((unsigned long)bh->b_data, order);
-
-			size &= (order-1);
-			bh->b_data += (1 << order) * PAGE_SIZE;
-		}
-		prev_bh = bh;
-		bh = bh->b_reqnext;
-		kfree(prev_bh);
-	}
-}
-
 static void ide_tape_handle_dsc(ide_drive_t *);
 
 static int ide_tape_callback(ide_drive_t *drive, int dsc)
@@ -496,7 +371,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 		}
 
 		tape->first_frame += blocks;
-		rq->current_nr_sectors -= blocks;
+		rq->resid_len -= blocks * tape->blk_size;
 
 		if (pc->error) {
 			uptodate = 0;
@@ -513,7 +388,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 		if (readpos[0] & 0x4) {
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					 "to the tape\n");
-			clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				  &drive->atapi_flags);
 			uptodate = 0;
 			err = IDE_DRV_ERROR_GENERAL;
 		} else {
@@ -522,7 +398,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 
 			tape->partition = readpos[1];
 			tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
-			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+				&drive->atapi_flags);
 		}
 	}
 
@@ -558,19 +435,6 @@ static void ide_tape_handle_dsc(ide_drive_t *drive)
 	idetape_postpone_request(drive);
 }
 
-static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-				unsigned int bcount, int write)
-{
-	unsigned int bleft;
-
-	if (write)
-		bleft = idetape_output_buffers(drive, pc, bcount);
-	else
-		bleft = idetape_input_buffers(drive, pc, bcount);
-
-	return bcount - bleft;
-}
-
 /*
  * Packet Command Interface
  *
@@ -614,12 +478,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-	if (drive->pc->c[0] == REQUEST_SENSE &&
-	    pc->c[0] == REQUEST_SENSE) {
-		printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
-			"Two request sense in serial were issued\n");
-	}
-
 	if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
 		drive->failed_pc = pc;
 
@@ -628,6 +486,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 
 	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
 		(pc->flags & PC_FLAG_ABORT)) {
+		unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
 		/*
 		 * We will "abort" retrying a packet command in case legitimate
 		 * error code was received (crossing a filemark, or end of the
@@ -647,8 +507,10 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 			/* Giving up */
 			pc->error = IDE_DRV_ERROR_GENERAL;
 		}
+
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
+		ide_complete_rq(drive, -EIO, done);
 		return ide_stopped;
 	}
 	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
@@ -701,7 +563,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 				printk(KERN_ERR "ide-tape: %s: I/O error, ",
 						tape->name);
 			/* Retry operation */
-			ide_retry_pc(drive, tape->disk);
+			ide_retry_pc(drive);
 			return ide_stopped;
 		}
 		pc->error = 0;
@@ -717,27 +579,22 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 				   struct ide_atapi_pc *pc, struct request *rq,
 				   u8 opcode)
 {
-	struct idetape_bh *bh = (struct idetape_bh *)rq->special;
-	unsigned int length = rq->current_nr_sectors;
+	unsigned int length = blk_rq_sectors(rq);
 
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
-	pc->bh = bh;
 	pc->buf = NULL;
 	pc->buf_size = length * tape->blk_size;
 	pc->req_xfer = pc->buf_size;
 	if (pc->req_xfer == tape->buffer_size)
 		pc->flags |= PC_FLAG_DMA_OK;
 
-	if (opcode == READ_6) {
+	if (opcode == READ_6)
 		pc->c[0] = READ_6;
-		atomic_set(&bh->b_count, 0);
-	} else if (opcode == WRITE_6) {
+	else if (opcode == WRITE_6) {
 		pc->c[0] = WRITE_6;
 		pc->flags |= PC_FLAG_WRITING;
-		pc->b_data = bh->b_data;
-		pc->b_count = atomic_read(&bh->b_count);
 	}
 
 	memcpy(rq->cmd, pc->c, 12);
@@ -753,12 +610,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	struct ide_cmd cmd;
 	u8 stat;
 
-	debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu,"
-			" current_nr_sectors: %u\n",
-			(unsigned long long)rq->sector, rq->nr_sectors,
-			rq->current_nr_sectors);
+	debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n"
+		  (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
 
-	if (!blk_special_request(rq)) {
+	if (!(blk_special_request(rq) || blk_sense_request(rq))) {
 		/* We do not support buffer cache originated requests. */
 		printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
 			"request queue (%d)\n", drive->name, rq->cmd_type);
@@ -794,15 +649,15 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 
 	if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
 	    (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 
 	if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
-		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+		drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC;
 		drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
 	}
 
-	if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
-	    (stat & ATA_DSC) == 0) {
+	if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) &&
+	    !(stat & ATA_DSC)) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
 			tape->dsc_poll_freq = tape->best_dsc_rw_freq;
@@ -822,7 +677,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 			tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
 		idetape_postpone_request(drive);
 		return ide_stopped;
-	}
+	} else
+		drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC;
+
 	if (rq->cmd[13] & REQ_IDETAPE_READ) {
 		pc = &tape->queued_pc;
 		ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
@@ -834,7 +691,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		goto out;
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_PC1) {
-		pc = (struct ide_atapi_pc *) rq->buffer;
+		pc = (struct ide_atapi_pc *)rq->special;
 		rq->cmd[13] &= ~(REQ_IDETAPE_PC1);
 		rq->cmd[13] |= REQ_IDETAPE_PC2;
 		goto out;
@@ -846,6 +703,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	BUG();
 
 out:
+	/* prepare sense request for this command */
+	ide_prep_sense(drive, rq);
+
 	memset(&cmd, 0, sizeof(cmd));
 
 	if (rq_data_dir(rq))
@@ -853,167 +713,10 @@ out:
 
 	cmd.rq = rq;
 
-	return ide_tape_issue_pc(drive, &cmd, pc);
-}
-
-/*
- * The function below uses __get_free_pages to allocate a data buffer of size
- * tape->buffer_size (or a bit more). We attempt to combine sequential pages as
- * much as possible.
- *
- * It returns a pointer to the newly allocated buffer, or NULL in case of
- * failure.
- */
-static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape,
-						  int full, int clear)
-{
-	struct idetape_bh *prev_bh, *bh, *merge_bh;
-	int pages = tape->pages_per_buffer;
-	unsigned int order, b_allocd;
-	char *b_data = NULL;
-
-	merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
-	bh = merge_bh;
-	if (bh == NULL)
-		goto abort;
-
-	order = fls(pages) - 1;
-	bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order);
-	if (!bh->b_data)
-		goto abort;
-	b_allocd = (1 << order) * PAGE_SIZE;
-	pages &= (order-1);
-
-	if (clear)
-		memset(bh->b_data, 0, b_allocd);
-	bh->b_reqnext = NULL;
-	bh->b_size = b_allocd;
-	atomic_set(&bh->b_count, full ? bh->b_size : 0);
-
-	while (pages) {
-		order = fls(pages) - 1;
-		b_data = (char *) __get_free_pages(GFP_KERNEL, order);
-		if (!b_data)
-			goto abort;
-		b_allocd = (1 << order) * PAGE_SIZE;
-
-		if (clear)
-			memset(b_data, 0, b_allocd);
-
-		/* newly allocated page frames below buffer header or ...*/
-		if (bh->b_data == b_data + b_allocd) {
-			bh->b_size += b_allocd;
-			bh->b_data -= b_allocd;
-			if (full)
-				atomic_add(b_allocd, &bh->b_count);
-			continue;
-		}
-		/* they are above the header */
-		if (b_data == bh->b_data + bh->b_size) {
-			bh->b_size += b_allocd;
-			if (full)
-				atomic_add(b_allocd, &bh->b_count);
-			continue;
-		}
-		prev_bh = bh;
-		bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
-		if (!bh) {
-			free_pages((unsigned long) b_data, order);
-			goto abort;
-		}
-		bh->b_reqnext = NULL;
-		bh->b_data = b_data;
-		bh->b_size = b_allocd;
-		atomic_set(&bh->b_count, full ? bh->b_size : 0);
-		prev_bh->b_reqnext = bh;
-
-		pages &= (order-1);
-	}
+	ide_init_sg_cmd(&cmd, pc->req_xfer);
+	ide_map_sg(drive, &cmd);
 
-	bh->b_size -= tape->excess_bh_size;
-	if (full)
-		atomic_sub(tape->excess_bh_size, &bh->b_count);
-	return merge_bh;
-abort:
-	ide_tape_kfree_buffer(tape);
-	return NULL;
-}
-
-static int idetape_copy_stage_from_user(idetape_tape_t *tape,
-					const char __user *buf, int n)
-{
-	struct idetape_bh *bh = tape->bh;
-	int count;
-	int ret = 0;
-
-	while (n) {
-		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
-					__func__);
-			return 1;
-		}
-		count = min((unsigned int)
-				(bh->b_size - atomic_read(&bh->b_count)),
-				(unsigned int)n);
-		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
-				count))
-			ret = 1;
-		n -= count;
-		atomic_add(count, &bh->b_count);
-		buf += count;
-		if (atomic_read(&bh->b_count) == bh->b_size) {
-			bh = bh->b_reqnext;
-			if (bh)
-				atomic_set(&bh->b_count, 0);
-		}
-	}
-	tape->bh = bh;
-	return ret;
-}
-
-static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
-				      int n)
-{
-	struct idetape_bh *bh = tape->bh;
-	int count;
-	int ret = 0;
-
-	while (n) {
-		if (bh == NULL) {
-			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
-					__func__);
-			return 1;
-		}
-		count = min(tape->b_count, n);
-		if  (copy_to_user(buf, tape->b_data, count))
-			ret = 1;
-		n -= count;
-		tape->b_data += count;
-		tape->b_count -= count;
-		buf += count;
-		if (!tape->b_count) {
-			bh = bh->b_reqnext;
-			tape->bh = bh;
-			if (bh) {
-				tape->b_data = bh->b_data;
-				tape->b_count = atomic_read(&bh->b_count);
-			}
-		}
-	}
-	return ret;
-}
-
-static void idetape_init_merge_buffer(idetape_tape_t *tape)
-{
-	struct idetape_bh *bh = tape->merge_bh;
-	tape->bh = tape->merge_bh;
-
-	if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
-		atomic_set(&bh->b_count, 0);
-	else {
-		tape->b_data = bh->b_data;
-		tape->b_count = atomic_read(&bh->b_count);
-	}
+	return ide_tape_issue_pc(drive, &cmd, pc);
 }
 
 /*
@@ -1036,7 +739,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	int load_attempted = 0;
 
 	/* Wait for the tape to become ready */
-	set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+	set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags);
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		if (ide_do_test_unit_ready(drive, disk) == 0)
@@ -1112,11 +815,11 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
 		return;
 
-	clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
-	tape->merge_bh_size = 0;
-	if (tape->merge_bh != NULL) {
-		ide_tape_kfree_buffer(tape);
-		tape->merge_bh = NULL;
+	clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags);
+	tape->valid = 0;
+	if (tape->buf != NULL) {
+		kfree(tape->buf);
+		tape->buf = NULL;
 	}
 
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
@@ -1170,36 +873,44 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
  * Generate a read/write request for the block device interface and wait for it
  * to be serviced.
  */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
-				 struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct request *rq;
-	int ret, errors;
+	int ret;
 
 	debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+	BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
+	BUG_ON(size < 0 || size % tape->blk_size);
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd[13] = cmd;
 	rq->rq_disk = tape->disk;
-	rq->special = (void *)bh;
-	rq->sector = tape->first_frame;
-	rq->nr_sectors = blocks;
-	rq->current_nr_sectors = blocks;
-	blk_execute_rq(drive->queue, tape->disk, rq, 0);
+	rq->__sector = tape->first_frame;
 
-	errors = rq->errors;
-	ret = tape->blk_size * (blocks - rq->current_nr_sectors);
-	blk_put_request(rq);
+	if (size) {
+		ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
+				      __GFP_WAIT);
+		if (ret)
+			goto out_put;
+	}
 
-	if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
-		return 0;
+	blk_execute_rq(drive->queue, tape->disk, rq, 0);
 
-	if (tape->merge_bh)
-		idetape_init_merge_buffer(tape);
-	if (errors == IDE_DRV_ERROR_GENERAL)
-		return -EIO;
+	/* calculate the number of transferred bytes and update buffer state */
+	size -= rq->resid_len;
+	tape->cur = tape->buf;
+	if (cmd == REQ_IDETAPE_READ)
+		tape->valid = size;
+	else
+		tape->valid = 0;
+
+	ret = size;
+	if (rq->errors == IDE_DRV_ERROR_GENERAL)
+		ret = -EIO;
+out_put:
+	blk_put_request(rq);
 	return ret;
 }
 
@@ -1236,153 +947,87 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
 	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 }
 
-/* Queue up a character device originated write request. */
-static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
-{
-	idetape_tape_t *tape = drive->driver_data;
-
-	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
-
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
-				     blocks, tape->merge_bh);
-}
-
 static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int blocks, min;
-	struct idetape_bh *bh;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
 		printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
 				" but we are not writing.\n");
 		return;
 	}
-	if (tape->merge_bh_size > tape->buffer_size) {
-		printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
-		tape->merge_bh_size = tape->buffer_size;
-	}
-	if (tape->merge_bh_size) {
-		blocks = tape->merge_bh_size / tape->blk_size;
-		if (tape->merge_bh_size % tape->blk_size) {
-			unsigned int i;
-
-			blocks++;
-			i = tape->blk_size - tape->merge_bh_size %
-				tape->blk_size;
-			bh = tape->bh->b_reqnext;
-			while (bh) {
-				atomic_set(&bh->b_count, 0);
-				bh = bh->b_reqnext;
-			}
-			bh = tape->bh;
-			while (i) {
-				if (bh == NULL) {
-					printk(KERN_INFO "ide-tape: bug,"
-							 " bh NULL\n");
-					break;
-				}
-				min = min(i, (unsigned int)(bh->b_size -
-						atomic_read(&bh->b_count)));
-				memset(bh->b_data + atomic_read(&bh->b_count),
-						0, min);
-				atomic_add(min, &bh->b_count);
-				i -= min;
-				bh = bh->b_reqnext;
-			}
-		}
-		(void) idetape_add_chrdev_write_request(drive, blocks);
-		tape->merge_bh_size = 0;
-	}
-	if (tape->merge_bh != NULL) {
-		ide_tape_kfree_buffer(tape);
-		tape->merge_bh = NULL;
+	if (tape->buf) {
+		size_t aligned = roundup(tape->valid, tape->blk_size);
+
+		memset(tape->cur, 0, aligned - tape->valid);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned);
+		kfree(tape->buf);
+		tape->buf = NULL;
 	}
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 }
 
-static int idetape_init_read(ide_drive_t *drive)
+static int idetape_init_rw(ide_drive_t *drive, int dir)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int bytes_read;
-
-	/* Initialize read operation */
-	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
-			ide_tape_flush_merge_buffer(drive);
-			idetape_flush_tape_buffers(drive);
-		}
-		if (tape->merge_bh || tape->merge_bh_size) {
-			printk(KERN_ERR "ide-tape: merge_bh_size should be"
-					 " 0 now\n");
-			tape->merge_bh_size = 0;
-		}
-		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
-		if (!tape->merge_bh)
-			return -ENOMEM;
-		tape->chrdev_dir = IDETAPE_DIR_READ;
+	int rc;
 
-		/*
-		 * Issue a read 0 command to ensure that DSC handshake is
-		 * switched from completion mode to buffer available mode.
-		 * No point in issuing this if DSC overlap isn't supported, some
-		 * drives (Seagate STT3401A) will return an error.
-		 */
-		if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
-			bytes_read = idetape_queue_rw_tail(drive,
-							REQ_IDETAPE_READ, 0,
-							tape->merge_bh);
-			if (bytes_read < 0) {
-				ide_tape_kfree_buffer(tape);
-				tape->merge_bh = NULL;
-				tape->chrdev_dir = IDETAPE_DIR_NONE;
-				return bytes_read;
-			}
-		}
-	}
+	BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE);
 
-	return 0;
-}
+	if (tape->chrdev_dir == dir)
+		return 0;
 
-/* called from idetape_chrdev_read() to service a chrdev read request. */
-static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
-{
-	idetape_tape_t *tape = drive->driver_data;
+	if (tape->chrdev_dir == IDETAPE_DIR_READ)
+		ide_tape_discard_merge_buffer(drive, 1);
+	else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
+		ide_tape_flush_merge_buffer(drive);
+		idetape_flush_tape_buffers(drive);
+	}
 
-	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
+	if (tape->buf || tape->valid) {
+		printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+		tape->valid = 0;
+	}
 
-	/* If we are at a filemark, return a read length of 0 */
-	if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
-		return 0;
+	tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+	if (!tape->buf)
+		return -ENOMEM;
+	tape->chrdev_dir = dir;
+	tape->cur = tape->buf;
 
-	idetape_init_read(drive);
+	/*
+	 * Issue a 0 rw command to ensure that DSC handshake is
+	 * switched from completion mode to buffer available mode.  No
+	 * point in issuing this if DSC overlap isn't supported, some
+	 * drives (Seagate STT3401A) will return an error.
+	 */
+	if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
+		int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ
+						  : REQ_IDETAPE_WRITE;
+
+		rc = idetape_queue_rw_tail(drive, cmd, 0);
+		if (rc < 0) {
+			kfree(tape->buf);
+			tape->buf = NULL;
+			tape->chrdev_dir = IDETAPE_DIR_NONE;
+			return rc;
+		}
+	}
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
-				     tape->merge_bh);
+	return 0;
 }
 
 static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	struct idetape_bh *bh;
-	int blocks;
+
+	memset(tape->buf, 0, tape->buffer_size);
 
 	while (bcount) {
-		unsigned int count;
+		unsigned int count = min(tape->buffer_size, bcount);
 
-		bh = tape->merge_bh;
-		count = min(tape->buffer_size, bcount);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
 		bcount -= count;
-		blocks = count / tape->blk_size;
-		while (count) {
-			atomic_set(&bh->b_count,
-				   min(count, (unsigned int)bh->b_size));
-			memset(bh->b_data, 0, atomic_read(&bh->b_count));
-			count -= atomic_read(&bh->b_count);
-			bh = bh->b_reqnext;
-		}
-		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
-				      tape->merge_bh);
 	}
 }
 
@@ -1462,8 +1107,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	}
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
-		tape->merge_bh_size = 0;
-		if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+		tape->valid = 0;
+		if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK),
+				       &drive->atapi_flags))
 			++count;
 		ide_tape_discard_merge_buffer(drive, 0);
 	}
@@ -1511,61 +1157,56 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 {
 	struct ide_tape_obj *tape = file->private_data;
 	ide_drive_t *drive = tape->drive;
-	ssize_t bytes_read, temp, actually_read = 0, rc;
+	size_t done = 0;
 	ssize_t ret = 0;
-	u16 ctl = *(u16 *)&tape->caps[12];
+	int rc;
 
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags))
+		if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
 	}
-	rc = idetape_init_read(drive);
+
+	rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
 	if (rc < 0)
 		return rc;
-	if (count == 0)
-		return (0);
-	if (tape->merge_bh_size) {
-		actually_read = min((unsigned int)(tape->merge_bh_size),
-				    (unsigned int)count);
-		if (idetape_copy_stage_to_user(tape, buf, actually_read))
-			ret = -EFAULT;
-		buf += actually_read;
-		tape->merge_bh_size -= actually_read;
-		count -= actually_read;
-	}
-	while (count >= tape->buffer_size) {
-		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
-		if (bytes_read <= 0)
-			goto finish;
-		if (idetape_copy_stage_to_user(tape, buf, bytes_read))
-			ret = -EFAULT;
-		buf += bytes_read;
-		count -= bytes_read;
-		actually_read += bytes_read;
-	}
-	if (count) {
-		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
-		if (bytes_read <= 0)
-			goto finish;
-		temp = min((unsigned long)count, (unsigned long)bytes_read);
-		if (idetape_copy_stage_to_user(tape, buf, temp))
+
+	while (done < count) {
+		size_t todo;
+
+		/* refill if staging buffer is empty */
+		if (!tape->valid) {
+			/* If we are at a filemark, nothing more to read */
+			if (test_bit(ilog2(IDE_AFLAG_FILEMARK),
+				     &drive->atapi_flags))
+				break;
+			/* read */
+			if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
+						  tape->buffer_size) <= 0)
+				break;
+		}
+
+		/* copy out */
+		todo = min_t(size_t, count - done, tape->valid);
+		if (copy_to_user(buf + done, tape->cur, todo))
 			ret = -EFAULT;
-		actually_read += temp;
-		tape->merge_bh_size = bytes_read-temp;
+
+		tape->cur += todo;
+		tape->valid -= todo;
+		done += todo;
 	}
-finish:
-	if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+
+	if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
 		return 0;
 	}
 
-	return ret ? ret : actually_read;
+	return ret ? ret : done;
 }
 
 static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
@@ -1573,9 +1214,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 {
 	struct ide_tape_obj *tape = file->private_data;
 	ide_drive_t *drive = tape->drive;
-	ssize_t actually_written = 0;
+	size_t done = 0;
 	ssize_t ret = 0;
-	u16 ctl = *(u16 *)&tape->caps[12];
+	int rc;
 
 	/* The drive is write protected. */
 	if (tape->write_prot)
@@ -1584,80 +1225,31 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	/* Initialize write operation */
-	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
-		if (tape->chrdev_dir == IDETAPE_DIR_READ)
-			ide_tape_discard_merge_buffer(drive, 1);
-		if (tape->merge_bh || tape->merge_bh_size) {
-			printk(KERN_ERR "ide-tape: merge_bh_size "
-				"should be 0 now\n");
-			tape->merge_bh_size = 0;
-		}
-		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
-		if (!tape->merge_bh)
-			return -ENOMEM;
-		tape->chrdev_dir = IDETAPE_DIR_WRITE;
-		idetape_init_merge_buffer(tape);
+	rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
+	if (rc < 0)
+		return rc;
 
-		/*
-		 * Issue a write 0 command to ensure that DSC handshake is
-		 * switched from completion mode to buffer available mode. No
-		 * point in issuing this if DSC overlap isn't supported, some
-		 * drives (Seagate STT3401A) will return an error.
-		 */
-		if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
-			ssize_t retval = idetape_queue_rw_tail(drive,
-							REQ_IDETAPE_WRITE, 0,
-							tape->merge_bh);
-			if (retval < 0) {
-				ide_tape_kfree_buffer(tape);
-				tape->merge_bh = NULL;
-				tape->chrdev_dir = IDETAPE_DIR_NONE;
-				return retval;
-			}
-		}
-	}
-	if (count == 0)
-		return (0);
-	if (tape->merge_bh_size) {
-		if (tape->merge_bh_size >= tape->buffer_size) {
-			printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
-			tape->merge_bh_size = 0;
-		}
-		actually_written = min((unsigned int)
-				(tape->buffer_size - tape->merge_bh_size),
-				(unsigned int)count);
-		if (idetape_copy_stage_from_user(tape, buf, actually_written))
-				ret = -EFAULT;
-		buf += actually_written;
-		tape->merge_bh_size += actually_written;
-		count -= actually_written;
-
-		if (tape->merge_bh_size == tape->buffer_size) {
-			ssize_t retval;
-			tape->merge_bh_size = 0;
-			retval = idetape_add_chrdev_write_request(drive, ctl);
-			if (retval <= 0)
-				return (retval);
-		}
-	}
-	while (count >= tape->buffer_size) {
-		ssize_t retval;
-		if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size))
-			ret = -EFAULT;
-		buf += tape->buffer_size;
-		count -= tape->buffer_size;
-		retval = idetape_add_chrdev_write_request(drive, ctl);
-		actually_written += tape->buffer_size;
-		if (retval <= 0)
-			return (retval);
-	}
-	if (count) {
-		actually_written += count;
-		if (idetape_copy_stage_from_user(tape, buf, count))
+	while (done < count) {
+		size_t todo;
+
+		/* flush if staging buffer is full */
+		if (tape->valid == tape->buffer_size &&
+		    idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+					  tape->buffer_size) <= 0)
+			return rc;
+
+		/* copy in */
+		todo = min_t(size_t, count - done,
+			     tape->buffer_size - tape->valid);
+		if (copy_from_user(tape->cur, buf + done, todo))
 			ret = -EFAULT;
-		tape->merge_bh_size += count;
+
+		tape->cur += todo;
+		tape->valid += todo;
+		done += todo;
 	}
-	return ret ? ret : actually_written;
+
+	return ret ? ret : done;
 }
 
 static int idetape_write_filemark(ide_drive_t *drive)
@@ -1741,7 +1333,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 		ide_tape_discard_merge_buffer(drive, 0);
 		retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
 		if (!retval)
-			clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+				  &drive->atapi_flags);
 		return retval;
 	case MTNOP:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1763,9 +1356,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			    mt_count % tape->blk_size)
 				return -EIO;
 			tape->user_bs_factor = mt_count / tape->blk_size;
-			clear_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_DETECT_BS),
+				  &drive->atapi_flags);
 		} else
-			set_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+			set_bit(ilog2(IDE_AFLAG_DETECT_BS),
+				&drive->atapi_flags);
 		return 0;
 	case MTSEEK:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1818,7 +1413,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 		idetape_flush_tape_buffers(drive);
 	}
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
-		block_offset = tape->merge_bh_size /
+		block_offset = tape->valid /
 			(tape->blk_size * tape->user_bs_factor);
 		position = idetape_read_position(drive);
 		if (position < 0)
@@ -1891,7 +1486,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 		return -ENXIO;
 
 	lock_kernel();
-	tape = ide_tape_chrdev_get(i);
+	tape = ide_tape_get(NULL, true, i);
 	if (!tape) {
 		unlock_kernel();
 		return -ENXIO;
@@ -1910,20 +1505,20 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDE_AFLAG_BUSY, &drive->atapi_flags)) {
+	if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+		clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags))
+	if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
 	/* Read block size and write protect status from drive. */
@@ -1939,7 +1534,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+			clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -1966,12 +1561,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_tape_flush_merge_buffer(drive);
-	tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0);
-	if (tape->merge_bh != NULL) {
+	tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+	if (tape->buf != NULL) {
 		idetape_pad_zeros(drive, tape->blk_size *
 				(tape->user_bs_factor - 1));
-		ide_tape_kfree_buffer(tape);
-		tape->merge_bh = NULL;
+		kfree(tape->buf);
+		tape->buf = NULL;
 	}
 	idetape_write_filemark(drive);
 	idetape_flush_tape_buffers(drive);
@@ -1996,15 +1591,17 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 			ide_tape_discard_merge_buffer(drive, 1);
 	}
 
-	if (minor < 128 && test_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags))
+	if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+				    &drive->atapi_flags))
 		(void) idetape_rewind_tape(drive);
+
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
 			if (!ide_set_media_lock(drive, tape->disk, 0))
 				tape->door_locked = DOOR_UNLOCKED;
 		}
 	}
-	clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+	clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -2165,8 +1762,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	u16 *ctl = (u16 *)&tape->caps[12];
 
 	drive->pc_callback	 = ide_tape_callback;
-	drive->pc_update_buffers = idetape_update_buffers;
-	drive->pc_io_buffers	 = ide_tape_io_buffers;
 
 	drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
 
@@ -2197,11 +1792,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 		tape->buffer_size = *ctl * tape->blk_size;
 	}
 	buffer_size = tape->buffer_size;
-	tape->pages_per_buffer = buffer_size / PAGE_SIZE;
-	if (buffer_size % PAGE_SIZE) {
-		tape->pages_per_buffer++;
-		tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE;
-	}
 
 	/* select the "best" DSC read/write polling freq */
 	speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
@@ -2244,7 +1834,7 @@ static void ide_tape_release(struct device *dev)
 	ide_drive_t *drive = tape->drive;
 	struct gendisk *g = tape->disk;
 
-	BUG_ON(tape->merge_bh_size);
+	BUG_ON(tape->valid);
 
 	drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
 	drive->driver_data = NULL;
@@ -2317,7 +1907,7 @@ static const struct file_operations idetape_fops = {
 
 static int idetape_open(struct block_device *bdev, fmode_t mode)
 {
-	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
+	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk, false, 0);
 
 	if (!tape)
 		return -ENXIO;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 4aa6223c11b..75b85a8cd2d 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -98,7 +98,6 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd)
 	if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
 		ide_tf_dump(drive->name, cmd);
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-		SELECT_MASK(drive, 0);
 
 		if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) {
 			u8 data[2] = { cmd->tf.data, cmd->hob.data };
@@ -166,7 +165,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
 	if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
 		if (custom && tf->command == ATA_CMD_SET_MULTI) {
 			drive->mult_req = drive->mult_count = 0;
-			drive->special.b.recalibrate = 1;
+			drive->special_flags |= IDE_SFLAG_RECALIBRATE;
 			(void)ide_dump_status(drive, __func__, stat);
 			return ide_stopped;
 		} else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
@@ -385,7 +384,7 @@ out_end:
 	if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
 		ide_finish_cmd(drive, cmd, stat);
 	else
-		ide_complete_rq(drive, 0, cmd->rq->nr_sectors << 9);
+		ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9);
 	return ide_stopped;
 out_err:
 	ide_error_cmd(drive, cmd);
@@ -424,7 +423,9 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf,
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
-	rq->buffer = buf;
+
+	if (cmd->tf_flags & IDE_TFLAG_WRITE)
+		rq->cmd_flags |= REQ_RW;
 
 	/*
 	 * (ks) We transfer currently only whole sectors.
@@ -432,18 +433,20 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf,
 	 * if we would find a solution to transfer any size.
 	 * To support special commands like READ LONG.
 	 */
-	rq->hard_nr_sectors = rq->nr_sectors = nsect;
-	rq->hard_cur_sectors = rq->current_nr_sectors = nsect;
-
-	if (cmd->tf_flags & IDE_TFLAG_WRITE)
-		rq->cmd_flags |= REQ_RW;
+	if (nsect) {
+		error = blk_rq_map_kern(drive->queue, rq, buf,
+					nsect * SECTOR_SIZE, __GFP_WAIT);
+		if (error)
+			goto put_req;
+	}
 
 	rq->special = cmd;
 	cmd->rq = rq;
 
 	error = blk_execute_rq(drive->queue, NULL, rq, 0);
-	blk_put_request(rq);
 
+put_req:
+	blk_put_request(rq);
 	return error;
 }
 
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 92c9b90931e..16d056939f9 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -211,6 +211,11 @@ static unsigned int ide_noflush;
 module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
 MODULE_PARM_DESC(noflush, "disable flush requests for a device");
 
+static unsigned int ide_nohpa;
+
+module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0);
+MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
+
 static unsigned int ide_noprobe;
 
 module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
@@ -281,6 +286,11 @@ static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
 				 drive->name);
 		drive->dev_flags |= IDE_DFLAG_NOFLUSH;
 	}
+	if (ide_nohpa & (1 << i)) {
+		printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
+				 drive->name);
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
+	}
 	if (ide_noprobe & (1 << i)) {
 		printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
 		drive->dev_flags |= IDE_DFLAG_NOPROBE;
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index 051b4ab0f35..ee9b55ecc62 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -21,7 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
+static void __devinit plat_ide_setup_ports(struct ide_hw *hw,
 					   void __iomem *base,
 					   void __iomem *ctrl,
 					   struct pata_platform_info *pdata,
@@ -40,12 +40,11 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
 	hw->io_ports.ctl_addr = (unsigned long)ctrl;
 
 	hw->irq = irq;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info platform_ide_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
 static int __devinit plat_ide_probe(struct platform_device *pdev)
@@ -55,7 +54,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	struct pata_platform_info *pdata;
 	struct ide_host *host;
 	int ret = 0, mmio = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_port_info d = platform_ide_port_info;
 
 	pdata = pdev->dev.platform_data;
@@ -99,7 +98,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	if (mmio)
 		d.host_flags |= IDE_HFLAG_MMIO;
 
-	ret = ide_host_add(&d, hws, &host);
+	ret = ide_host_add(&d, hws, 1, &host);
 	if (ret)
 		goto out;
 
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 4b1718e8328..1447c8c9056 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -62,7 +62,7 @@ int macide_ack_intr(ide_hwif_t* hwif)
 	return 0;
 }
 
-static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
+static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 				      int irq, ide_ack_intr_t *ack_intr)
 {
 	int i;
@@ -76,13 +76,12 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = irq;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static const struct ide_port_info macide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
 static const char *mac_ide_name[] =
@@ -97,7 +96,7 @@ static int __init macide_init(void)
 	ide_ack_intr_t *ack_intr;
 	unsigned long base;
 	int irq;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
@@ -127,7 +126,7 @@ static int __init macide_init(void)
 
 	macide_setup_ports(&hw, base, irq, ack_intr);
 
-	return ide_host_add(&macide_port_info, hws, NULL);
+	return ide_host_add(&macide_port_info, hws, 1, NULL);
 }
 
 module_init(macide_init);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index 09d813d313f..3c1dc015215 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -306,6 +306,7 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO,
 	.pio_mask		= ATA_PIO4,
 	.mwdma_mask		= ATA_MWDMA2,
+	.chipset		= ide_palm3710,
 };
 
 static int __init palm_bk3710_probe(struct platform_device *pdev)
@@ -315,7 +316,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 	void __iomem *base;
 	unsigned long rate, mem_size;
 	int i, rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	clk = clk_get(&pdev->dev, "IDECLK");
 	if (IS_ERR(clk))
@@ -363,13 +364,12 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);
 	hw.irq = irq->start;
 	hw.dev = &pdev->dev;
-	hw.chipset = ide_palm3710;
 
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
 							     ATA_UDMA5;
 
 	/* Register the IDE interface with Linux */
-	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
+	rc = ide_host_add(&palm_bk3710_port_info, hws, 1, NULL);
 	if (rc)
 		goto out;
 
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index b68906c3c17..65ba8239e7b 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -40,18 +40,6 @@
 #define DBG(fmt, args...)
 #endif
 
-static const char *pdc_quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP KA9.1",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP KX13.6",
-	"QUANTUM FIREBALLP KX20.5",
-	"QUANTUM FIREBALLP KX27.3",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static u8 max_dma_rate(struct pci_dev *pdev)
 {
 	u8 mode;
@@ -200,19 +188,6 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
 		return ATA_CBL_PATA80;
 }
 
-static void pdcnew_quirkproc(ide_drive_t *drive)
-{
-	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
-	for (list = pdc_quirk_drives; *list != NULL; list++)
-		if (strstr(m, *list) != NULL) {
-			drive->quirk_list = 2;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void pdcnew_reset(ide_drive_t *drive)
 {
 	/*
@@ -473,7 +448,6 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
 static const struct ide_port_ops pdcnew_port_ops = {
 	.set_pio_mode		= pdcnew_set_pio_mode,
 	.set_dma_mode		= pdcnew_set_dma_mode,
-	.quirkproc		= pdcnew_quirkproc,
 	.resetproc		= pdcnew_reset,
 	.cable_detect		= pdcnew_cable_detect,
 };
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 248a54bd238..b6abf7e52ca 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 1998-2002		Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2006-2007		MontaVista Software, Inc.
+ *  Copyright (C) 2006-2007, 2009	MontaVista Software, Inc.
  *  Copyright (C) 2007			Bartlomiej Zolnierkiewicz
  *
  *  Portions Copyright (C) 1999 Promise Technology, Inc.
@@ -23,18 +23,6 @@
 
 #define PDC202XX_DEBUG_DRIVE_INFO	0
 
-static const char *pdc_quirk_drives[] = {
-	"QUANTUM FIREBALLlct08 08",
-	"QUANTUM FIREBALLP KA6.4",
-	"QUANTUM FIREBALLP KA9.1",
-	"QUANTUM FIREBALLP LM20.4",
-	"QUANTUM FIREBALLP KX13.6",
-	"QUANTUM FIREBALLP KX20.5",
-	"QUANTUM FIREBALLP KX27.3",
-	"QUANTUM FIREBALLP LM20.5",
-	NULL
-};
-
 static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
 
 static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
@@ -151,19 +139,6 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
 	outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
 }
 
-static void pdc202xx_quirkproc(ide_drive_t *drive)
-{
-	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
-	for (list = pdc_quirk_drives; *list != NULL; list++)
-		if (strstr(m, *list) != NULL) {
-			drive->quirk_list = 2;
-			return;
-		}
-
-	drive->quirk_list = 0;
-}
-
 static void pdc202xx_dma_start(ide_drive_t *drive)
 {
 	if (drive->current_speed > XFER_UDMA_2)
@@ -177,7 +152,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)
 		u8 clock = inb(high_16 + 0x11);
 
 		outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
-		word_count = (rq->nr_sectors << 8);
+		word_count = (blk_rq_sectors(rq) << 8);
 		word_count = (rq_data_dir(rq) == READ) ?
 					word_count | 0x05000000 :
 					word_count | 0x06000000;
@@ -203,61 +178,6 @@ static int pdc202xx_dma_end(ide_drive_t *drive)
 	return ide_dma_end(drive);
 }
 
-static int pdc202xx_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long high_16	= hwif->extra_base - 16;
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
-	u8 sc1d			= inb(high_16 + 0x001d);
-
-	if (hwif->channel) {
-		/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
-		if ((sc1d & 0x50) == 0x50)
-			goto somebody_else;
-		else if ((sc1d & 0x40) == 0x40)
-			return (dma_stat & 4) == 4;
-	} else {
-		/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
-		if ((sc1d & 0x05) == 0x05)
-			goto somebody_else;
-		else if ((sc1d & 0x04) == 0x04)
-			return (dma_stat & 4) == 4;
-	}
-somebody_else:
-	return (dma_stat & 4) == 4;	/* return 1 if INTR asserted */
-}
-
-static void pdc202xx_reset_host (ide_hwif_t *hwif)
-{
-	unsigned long high_16	= hwif->extra_base - 16;
-	u8 udma_speed_flag	= inb(high_16 | 0x001f);
-
-	outb(udma_speed_flag | 0x10, high_16 | 0x001f);
-	mdelay(100);
-	outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
-	mdelay(2000);	/* 2 seconds ?! */
-
-	printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
-		hwif->channel ? "Secondary" : "Primary");
-}
-
-static void pdc202xx_reset (ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	ide_hwif_t *mate	= hwif->mate;
-
-	pdc202xx_reset_host(hwif);
-	pdc202xx_reset_host(mate);
-
-	ide_set_max_pio(drive);
-}
-
-static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
-{
-	pdc202xx_reset(drive);
-	ide_dma_lost_irq(drive);
-}
-
 static int init_chipset_pdc202xx(struct pci_dev *dev)
 {
 	unsigned long dmabase = pci_resource_start(dev, 4);
@@ -311,38 +231,22 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 static const struct ide_port_ops pdc20246_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
-	.quirkproc		= pdc202xx_quirkproc,
 };
 
 static const struct ide_port_ops pdc2026x_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
-	.quirkproc		= pdc202xx_quirkproc,
-	.resetproc		= pdc202xx_reset,
 	.cable_detect		= pdc2026x_cable_detect,
 };
 
-static const struct ide_dma_ops pdc20246_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= pdc202xx_dma_test_irq,
-	.dma_lost_irq		= pdc202xx_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_clear		= pdc202xx_reset,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
 static const struct ide_dma_ops pdc2026x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= pdc202xx_dma_start,
 	.dma_end		= pdc202xx_dma_end,
-	.dma_test_irq		= pdc202xx_dma_test_irq,
-	.dma_lost_irq		= pdc202xx_dma_lost_irq,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_clear		= pdc202xx_reset,
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
@@ -364,7 +268,7 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_pdc202xx,
 		.port_ops	= &pdc20246_port_ops,
-		.dma_ops	= &pdc20246_dma_ops,
+		.dma_ops	= &sff_dma_ops,
 		.host_flags	= IDE_HFLAGS_PDC202XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 2aa69993306..69860dea382 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
+	{ 0x27df, 0x104d, 0x900e },	/* ICH7 on Sony TZ-90 */
 	/* end marker */
 	{ 0, }
 };
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index f76e4e6b408..97642a7a79c 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1023,13 +1023,14 @@ static const struct ide_port_info pmac_port_info = {
  * Setup, register & probe an IDE channel driven by this driver, this is
  * called by one of the 2 probe functions (macio or PCI).
  */
-static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
+static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
+					   struct ide_hw *hw)
 {
 	struct device_node *np = pmif->node;
 	const int *bidp;
 	struct ide_host *host;
 	ide_hwif_t *hwif;
-	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
+	struct ide_hw *hws[] = { hw };
 	struct ide_port_info d = pmac_port_info;
 	int rc;
 
@@ -1077,7 +1078,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	/* Make sure we have sane timings */
 	sanitize_timings(pmif);
 
-	host = ide_host_alloc(&d, hws);
+	host = ide_host_alloc(&d, hws, 1);
 	if (host == NULL)
 		return -ENOMEM;
 	hwif = host->ports[0];
@@ -1124,7 +1125,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	return 0;
 }
 
-static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
+static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
 {
 	int i;
 
@@ -1144,7 +1145,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	unsigned long regbase;
 	pmac_ide_hwif_t *pmif;
 	int irq, rc;
-	hw_regs_t hw;
+	struct ide_hw hw;
 
 	pmif = kzalloc(sizeof(*pmif), GFP_KERNEL);
 	if (pmif == NULL)
@@ -1268,7 +1269,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	void __iomem *base;
 	unsigned long rbase, rlen;
 	int rc;
-	hw_regs_t hw;
+	struct ide_hw hw;
 
 	np = pci_device_to_OF_node(pdev);
 	if (np == NULL) {
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
index c7934667924..ab49a97023d 100644
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -51,11 +51,11 @@ static int q40ide_default_irq(unsigned long base)
 /*
  * Addresses are pretranslated for Q40 ISA access.
  */
-static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
+static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
 			ide_ack_intr_t *ack_intr,
 			int irq)
 {
-	memset(hw, 0, sizeof(hw_regs_t));
+	memset(hw, 0, sizeof(*hw));
 	/* BIG FAT WARNING: 
 	   assumption: only DATA port is ever used in 16 bit mode */
 	hw->io_ports.data_addr = Q40_ISA_IO_W(base);
@@ -70,8 +70,6 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
 
 	hw->irq = irq;
 	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
 }
 
 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
@@ -119,6 +117,7 @@ static const struct ide_port_info q40ide_port_info = {
 	.tp_ops			= &q40ide_tp_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
 };
 
 /* 
@@ -136,7 +135,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
 static int __init q40ide_init(void)
 {
     int i;
-    hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+    struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
 
     if (!MACH_IS_Q40)
       return -ENODEV;
@@ -163,7 +162,7 @@ static int __init q40ide_init(void)
 	hws[i] = &hw[i];
     }
 
-    return ide_host_add(&q40ide_port_info, hws, NULL);
+    return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
 }
 
 module_init(q40ide_init);
diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c
index d5003ca6980..00f54248f41 100644
--- a/drivers/ide/rapide.c
+++ b/drivers/ide/rapide.c
@@ -13,9 +13,10 @@
 
 static const struct ide_port_info rapide_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.chipset		= ide_generic,
 };
 
-static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
+static void rapide_setup_ports(struct ide_hw *hw, void __iomem *base,
 			       void __iomem *ctrl, unsigned int sz, int irq)
 {
 	unsigned long port = (unsigned long)base;
@@ -35,7 +36,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 	void __iomem *base;
 	struct ide_host *host;
 	int ret;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 
 	ret = ecard_request_resources(ec);
 	if (ret)
@@ -49,10 +50,9 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	memset(&hw, 0, sizeof(hw));
 	rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq);
-	hw.chipset = ide_generic;
 	hw.dev = &ec->dev;
 
-	ret = ide_host_add(&rapide_port_info, hws, &host);
+	ret = ide_host_add(&rapide_port_info, hws, 1, &host);
 	if (ret)
 		goto release;
 
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
index 5be41f25204..1104bb301eb 100644
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -559,7 +559,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 {
 	struct scc_ports *ports = pci_get_drvdata(dev);
 	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int i, rc;
 
 	memset(&hw, 0, sizeof(hw));
@@ -567,9 +567,8 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;
 
-	rc = ide_host_add(d, hws, &host);
+	rc = ide_host_add(d, hws, 1, &host);
 	if (rc)
 		return rc;
 
@@ -823,6 +822,7 @@ static const struct ide_port_info scc_chipset __devinitdata = {
 	.host_flags	= IDE_HFLAG_SINGLE,
 	.irq_flags	= IRQF_SHARED,
 	.pio_mask	= ATA_PIO4,
+	.chipset	= ide_pci,
 };
 
 /**
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7a3a12d6e63..ab3db61d2ba 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2000  Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 1995-1998  Mark Lord
- *  Copyright (C)      2007  Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2009  Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
  */
@@ -301,11 +301,11 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
 }
 
 /**
- *	ide_hw_configure	-	configure a hw_regs_t instance
+ *	ide_hw_configure	-	configure a struct ide_hw instance
  *	@dev: PCI device holding interface
  *	@d: IDE port info
  *	@port: port number
- *	@hw: hw_regs_t instance corresponding to this port
+ *	@hw: struct ide_hw instance corresponding to this port
  *
  *	Perform the initial set up for the hardware interface structure. This
  *	is done per interface port rather than per PCI device. There may be
@@ -315,7 +315,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
  */
 
 static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
-			    unsigned int port, hw_regs_t *hw)
+			    unsigned int port, struct ide_hw *hw)
 {
 	unsigned long ctl = 0, base = 0;
 
@@ -344,7 +344,6 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
 
 	memset(hw, 0, sizeof(*hw));
 	hw->dev = &dev->dev;
-	hw->chipset = d->chipset ? d->chipset : ide_pci;
 	ide_std_init_ports(hw, base, ctl | 2);
 
 	return 0;
@@ -446,8 +445,8 @@ out:
  *	ide_pci_setup_ports	-	configure ports/devices on PCI IDE
  *	@dev: PCI device
  *	@d: IDE port info
- *	@hw: hw_regs_t instances corresponding to this PCI IDE device
- *	@hws: hw_regs_t pointers table to update
+ *	@hw: struct ide_hw instances corresponding to this PCI IDE device
+ *	@hws: struct ide_hw pointers table to update
  *
  *	Scan the interfaces attached to this device and do any
  *	necessary per port setup. Attach the devices and ask the
@@ -459,7 +458,7 @@ out:
  */
 
 void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
-			 hw_regs_t *hw, hw_regs_t **hws)
+			 struct ide_hw *hw, struct ide_hw **hws)
 {
 	int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
 	u8 tmp;
@@ -535,61 +534,15 @@ out:
 	return ret;
 }
 
-int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
-		     void *priv)
-{
-	struct ide_host *host;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-	int ret;
-
-	ret = ide_setup_pci_controller(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
-
-	host = ide_host_alloc(d, hws);
-	if (host == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	host->dev[0] = &dev->dev;
-
-	host->host_priv = priv;
-
-	host->irq_flags = IRQF_SHARED;
-
-	pci_set_drvdata(dev, host);
-
-	ret = do_ide_setup_pci_device(dev, d, 1);
-	if (ret < 0)
-		goto out;
-
-	/* fixup IRQ */
-	if (ide_pci_is_in_compatibility_mode(dev)) {
-		hw[0].irq = pci_get_legacy_ide_irq(dev, 0);
-		hw[1].irq = pci_get_legacy_ide_irq(dev, 1);
-	} else
-		hw[1].irq = hw[0].irq = ret;
-
-	ret = ide_host_register(host, d, hws);
-	if (ret)
-		ide_host_free(host);
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ide_pci_init_one);
-
 int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 		     const struct ide_port_info *d, void *priv)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
 	struct ide_host *host;
-	int ret, i;
-	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+	int ret, i, n_ports = dev2 ? 4 : 2;
+	struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = ide_setup_pci_controller(pdev[i], d, !i);
 		if (ret < 0)
 			goto out;
@@ -597,23 +550,24 @@ int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 		ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
 	}
 
-	host = ide_host_alloc(d, hws);
+	host = ide_host_alloc(d, hws, n_ports);
 	if (host == NULL) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	host->dev[0] = &dev1->dev;
-	host->dev[1] = &dev2->dev;
+	if (dev2)
+		host->dev[1] = &dev2->dev;
 
 	host->host_priv = priv;
-
 	host->irq_flags = IRQF_SHARED;
 
 	pci_set_drvdata(pdev[0], host);
-	pci_set_drvdata(pdev[1], host);
+	if (dev2)
+		pci_set_drvdata(pdev[1], host);
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < n_ports / 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -639,6 +593,13 @@ out:
 }
 EXPORT_SYMBOL_GPL(ide_pci_init_two);
 
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+		     void *priv)
+{
+	return ide_pci_init_two(dev, NULL, d, priv);
+}
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
+
 void ide_pci_remove(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index e5d2a48a84d..5f37f168f94 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -91,7 +91,7 @@ typedef struct {
 
 
 static void
-sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
+sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
 			unsigned long ctrl_port, unsigned long irq_port)
 {
 	unsigned long reg = data_port;
@@ -546,7 +546,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
@@ -575,13 +575,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	memset(&hw, 0, sizeof(hw));
 	sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
 	hw.irq = dev->irq;
-	hw.chipset = ide_pci;
 	hw.dev = &dev->dev;
 
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
+	rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
 	if (!rc)
 		return 0;
 
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index e4973cd1fba..bd82d228608 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -451,8 +451,8 @@ static int sil_sata_reset_poll(ide_drive_t *drive)
 static void sil_sata_pre_reset(ide_drive_t *drive)
 {
 	if (drive->media == ide_disk) {
-		drive->special.b.set_geometry = 0;
-		drive->special.b.recalibrate = 0;
+		drive->special_flags &=
+			~(IDE_SFLAG_SET_GEOMETRY | IDE_SFLAG_RECALIBRATE);
 	}
 }
 
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index b0a46062533..0924abff52f 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -10,7 +10,7 @@
  * with the timing registers setup.
  *  -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
  *
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@mvista.com>
  * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  */
 
@@ -146,14 +146,15 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
 	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
 	u8 dma_cmd;
 
-	printk("sl82c105: lost IRQ, resetting host\n");
+	printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n");
 
 	/*
 	 * Check the raw interrupt from the drive.
 	 */
 	pci_read_config_dword(dev, 0x40, &val);
 	if (val & mask)
-		printk("sl82c105: drive was requesting IRQ, but host lost it\n");
+		printk(KERN_INFO "sl82c105: drive was requesting IRQ, "
+		       "but host lost it\n");
 
 	/*
 	 * Was DMA enabled?  If so, disable it - we're resetting the
@@ -162,7 +163,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
 	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	if (dma_cmd & 1) {
 		outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
-		printk("sl82c105: DMA was enabled\n");
+		printk(KERN_INFO "sl82c105: DMA was enabled\n");
 	}
 
 	sl82c105_reset_host(dev);
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index b4cf42dc8a6..05a93d6baec 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -112,7 +112,7 @@ static void tc86c001_dma_start(ide_drive_t *drive)
 	ide_hwif_t *hwif	= drive->hwif;
 	unsigned long sc_base	= hwif->config_data;
 	unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
-	unsigned long nsectors	= hwif->rq->nr_sectors;
+	unsigned long nsectors	= blk_rq_sectors(hwif->rq);
 
 	/*
 	 * We have to manually load the sector count and size into
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index e33d764e294..ea89fddeed9 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -130,8 +130,7 @@ static const struct ide_port_info tx4938ide_port_info __initdata = {
 
 static int __init tx4938ide_probe(struct platform_device *pdev)
 {
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	struct tx4938ide_platform_info *pdata = pdev->dev.platform_data;
@@ -183,7 +182,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev)
 		tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
 	else
 		d.port_ops = NULL;
-	ret = ide_host_add(&d, hws, &host);
+	ret = ide_host_add(&d, hws, 1, &host);
 	if (!ret)
 		platform_set_drvdata(pdev, host);
 	return ret;
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 564422d2397..64b58ecc3f0 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -307,7 +307,7 @@ static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ?
 			 TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1);
 
-	tx4939ide_writew(cmd->rq->nr_sectors, base, TX4939IDE_Sec_Cnt);
+	tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt);
 
 	return 0;
 }
@@ -537,8 +537,7 @@ static const struct ide_port_info tx4939ide_port_info __initdata = {
 
 static int __init tx4939ide_probe(struct platform_device *pdev)
 {
-	hw_regs_t hw;
-	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_host *host;
 	struct resource *res;
 	int irq, ret;
@@ -581,7 +580,7 @@ static int __init tx4939ide_probe(struct platform_device *pdev)
 	hw.dev = &pdev->dev;
 
 	pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq);
-	host = ide_host_alloc(&tx4939ide_port_info, hws);
+	host = ide_host_alloc(&tx4939ide_port_info, hws, 1);
 	if (!host)
 		return -ENOMEM;
 	/* use extra_base for base address of the all registers */
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 3ff7231e485..028de26a25f 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -67,6 +67,7 @@ static struct via_isa_bridge {
 	u8 udma_mask;
 	u8 flags;
 } via_isa_bridges[] = {
+	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
 	{ 0, },
diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c
index bf740394d70..949c97ff57e 100644
--- a/drivers/idle/i7300_idle.c
+++ b/drivers/idle/i7300_idle.c
@@ -41,6 +41,10 @@ static int debug;
 module_param_named(debug, debug, uint, 0644);
 MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
 
+static int forceload;
+module_param_named(forceload, forceload, uint, 0644);
+MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
+
 #define dprintk(fmt, arg...) \
 	do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
 
@@ -552,7 +556,7 @@ static int __init i7300_idle_init(void)
 	cpus_clear(idle_cpumask);
 	total_us = 0;
 
-	if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
+	if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
 		return -ENODEV;
 
 	if (i7300_idle_thrt_save())
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 823a6297a1a..2cd00b5b45b 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -1789,12 +1789,13 @@ static int dv1394_open(struct inode *inode, struct file *file)
 	} else {
 		/* look up the card by ID */
 		unsigned long flags;
+		int idx = ieee1394_file_to_instance(file);
 
 		spin_lock_irqsave(&dv1394_cards_lock, flags);
 		if (!list_empty(&dv1394_cards)) {
 			struct video_card *p;
 			list_for_each_entry(p, &dv1394_cards, list) {
-				if ((p->id) == ieee1394_file_to_instance(file)) {
+				if ((p->id) == idx) {
 					video = p;
 					break;
 				}
@@ -1803,7 +1804,7 @@ static int dv1394_open(struct inode *inode, struct file *file)
 		spin_unlock_irqrestore(&dv1394_cards_lock, flags);
 
 		if (!video) {
-			debug_printk("dv1394: OHCI card %d not found", ieee1394_file_to_instance(file));
+			debug_printk("dv1394: OHCI card %d not found", idx);
 			return -ENODEV;
 		}
 
diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index 21d50f73a21..28b9f58bafd 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -5,6 +5,7 @@
 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/types.h>
+#include <linux/cdev.h>
 #include <asm/atomic.h>
 
 #include "hosts.h"
@@ -155,7 +156,10 @@ void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size,
  */
 static inline unsigned char ieee1394_file_to_instance(struct file *file)
 {
-	return file->f_path.dentry->d_inode->i_cindex;
+	int idx = cdev_index(file->f_path.dentry->d_inode);
+	if (idx < 0)
+		idx = 0;
+	return idx;
 }
 
 extern int hpsb_disable_irm;
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 75223f50de5..0ba6ec87629 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -257,11 +257,8 @@ static void iscsi_iser_cleanup_task(struct iscsi_task *task)
 {
 	struct iscsi_iser_task *iser_task = task->dd_data;
 
-	/*
-	 * mgmt tasks do not need special cleanup and we do not
-	 * allocate anything in the init task callout
-	 */
-	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+	/* mgmt tasks do not need special cleanup */
+	if (!task->sc)
 		return;
 
 	if (iser_task->status == ISER_TASK_STATUS_STARTED) {
@@ -517,7 +514,8 @@ iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *s
 }
 
 static struct iscsi_endpoint *
-iscsi_iser_ep_connect(struct sockaddr *dst_addr, int non_blocking)
+iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+		      int non_blocking)
 {
 	int err;
 	struct iser_conn *ib_conn;
diff --git a/drivers/input/input.c b/drivers/input/input.c
index e54e002665b..5d445f48789 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -42,6 +42,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = {
 	ABS_MT_POSITION_Y,
 	ABS_MT_TOOL_TYPE,
 	ABS_MT_BLOB_ID,
+	ABS_MT_TRACKING_ID,
 	0
 };
 static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5c0a631d145..06f46fcc077 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -232,7 +232,7 @@ config INPUT_GPIO_ROTARY_ENCODER
 	depends on GPIOLIB && GENERIC_GPIO
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
-	  Check file:Documentation/incput/rotary_encoder.txt for more
+	  Check file:Documentation/input/rotary-encoder.txt for more
 	  information.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index da3c3a5d268..c4b3fbd1a80 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -192,7 +192,7 @@ config SERIO_RAW
 
 config SERIO_XILINX_XPS_PS2
 	tristate "Xilinx XPS PS/2 Controller Support"
-	depends on PPC
+	depends on PPC || MICROBLAZE
 	help
 	  This driver supports XPS PS/2 IP from the Xilinx EDK on
 	  PowerPC platform.
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index e29cdc13a19..89b394183a7 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io)
 	clk_disable(kmi->clk);
 }
 
-static int amba_kmi_probe(struct amba_device *dev, void *id)
+static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct amba_kmi_port *kmi;
 	struct serio *io;
@@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, void *id)
 	io->dev.parent	= &dev->dev;
 
 	kmi->io 	= io;
-	kmi->base	= ioremap(dev->res.start, KMI_SIZE);
+	kmi->base	= ioremap(dev->res.start, resource_size(&dev->res));
 	if (!kmi->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 67248c31e19..be5bbbb8ae4 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -210,7 +210,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
 	timeout = wait_event_timeout(ps2dev->wait,
 				     !(ps2dev->flags & PS2_FLAG_CMD1), timeout);
 
-	if (ps2dev->cmdcnt && timeout > 0) {
+	if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
 
 		timeout = ps2_adjust_timeout(ps2dev, command, timeout);
 		wait_event_timeout(ps2dev->wait,
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index f100c7f4c1d..6954f550010 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -419,7 +419,7 @@ static int ucb1400_ts_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int ucb1400_ts_resume(struct platform_device *dev)
 {
-	struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+	struct ucb1400_ts *ucb = dev->dev.platform_data;
 
 	if (ucb->ts_task) {
 		/*
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index 7d97d54588d..77e9fdda059 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -183,7 +183,7 @@ int cf_command(int drvid, int mode,
           (mode != 1) ? "" : " 0 ",
           (mode != 1) ? "" : fwd_nr);
  
-  retval = divert_if.ll_cmd(&cs->ics); /* excute command */
+  retval = divert_if.ll_cmd(&cs->ics); /* execute command */
 
   if (!retval)
    { cs->prev = NULL;
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index b171e75cb52..29808c4fb1c 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -175,7 +175,7 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size)
 		return -EINVAL;
 	}
 	src = iwb->read;
-	if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
+	if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
 		     (read < src && limit >= src))) {
 		pr_err("isoc write buffer frame reservation violated\n");
 		return -EFAULT;
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 3083338716b..47dbfe298b4 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -502,7 +502,7 @@ tone_off:
 			break;
 		}
 		dsp->cmx_delay = (*((int *)data)) << 3;
-			/* miliseconds to samples */
+			/* milliseconds to samples */
 		if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
 			/* clip to half of maximum usable buffer
 			(half of half buffer) */
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1aa46a390a0..173d104d9ff 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index aa2e7ae0cda..aa7acf3b922 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index a3d3cbab359..0aaa0597a62 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
 config LGUEST
 	tristate "Linux hypervisor example code"
-	depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX
+	depends on X86_32 && EXPERIMENTAL && EVENTFD
 	select HVC_DRIVER
 	---help---
 	  This is a very simple module which allows you to run
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 4845fb3cf74..a6974e9b8eb 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -95,7 +95,7 @@ static __init int map_switcher(void)
 	 * array of struct pages.  It increments that pointer, but we don't
 	 * care. */
 	pagep = switcher_page;
-	err = map_vm_area(switcher_vma, PAGE_KERNEL, &pagep);
+	err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
 	if (err) {
 		printk("lguest: map_vm_area failed: %i\n", err);
 		goto free_vma;
@@ -188,6 +188,9 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 {
 	/* We stop running once the Guest is dead. */
 	while (!cpu->lg->dead) {
+		unsigned int irq;
+		bool more;
+
 		/* First we run any hypercalls the Guest wants done. */
 		if (cpu->hcall)
 			do_hypercalls(cpu);
@@ -195,23 +198,23 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 		/* It's possible the Guest did a NOTIFY hypercall to the
 		 * Launcher, in which case we return from the read() now. */
 		if (cpu->pending_notify) {
-			if (put_user(cpu->pending_notify, user))
-				return -EFAULT;
-			return sizeof(cpu->pending_notify);
+			if (!send_notify_to_eventfd(cpu)) {
+				if (put_user(cpu->pending_notify, user))
+					return -EFAULT;
+				return sizeof(cpu->pending_notify);
+			}
 		}
 
 		/* Check for signals */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
-		/* If Waker set break_out, return to Launcher. */
-		if (cpu->break_out)
-			return -EAGAIN;
-
 		/* Check if there are any interrupts which can be delivered now:
 		 * if so, this sets up the hander to be executed when we next
 		 * run the Guest. */
-		maybe_do_interrupt(cpu);
+		irq = interrupt_pending(cpu, &more);
+		if (irq < LGUEST_IRQS)
+			try_deliver_interrupt(cpu, irq, more);
 
 		/* All long-lived kernel loops need to check with this horrible
 		 * thing called the freezer.  If the Host is trying to suspend,
@@ -224,10 +227,15 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 			break;
 
 		/* If the Guest asked to be stopped, we sleep.  The Guest's
-		 * clock timer or LHREQ_BREAK from the Waker will wake us. */
+		 * clock timer will wake us. */
 		if (cpu->halted) {
 			set_current_state(TASK_INTERRUPTIBLE);
-			schedule();
+			/* Just before we sleep, make sure no interrupt snuck in
+			 * which we should be doing. */
+			if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
+				set_current_state(TASK_RUNNING);
+			else
+				schedule();
 			continue;
 		}
 
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 54d66f05fef..c29ffa19cb7 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -37,6 +37,10 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 		/* This call does nothing, except by breaking out of the Guest
 		 * it makes us process all the asynchronous hypercalls. */
 		break;
+	case LHCALL_SEND_INTERRUPTS:
+		/* This call does nothing too, but by breaking out of the Guest
+		 * it makes us process any pending interrupts. */
+		break;
 	case LHCALL_LGUEST_INIT:
 		/* You can't get here unless you're already initialized.  Don't
 		 * do that. */
@@ -73,11 +77,21 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 		guest_set_stack(cpu, args->arg1, args->arg2, args->arg3);
 		break;
 	case LHCALL_SET_PTE:
+#ifdef CONFIG_X86_PAE
+		guest_set_pte(cpu, args->arg1, args->arg2,
+				__pte(args->arg3 | (u64)args->arg4 << 32));
+#else
 		guest_set_pte(cpu, args->arg1, args->arg2, __pte(args->arg3));
+#endif
+		break;
+	case LHCALL_SET_PGD:
+		guest_set_pgd(cpu->lg, args->arg1, args->arg2);
 		break;
+#ifdef CONFIG_X86_PAE
 	case LHCALL_SET_PMD:
 		guest_set_pmd(cpu->lg, args->arg1, args->arg2);
 		break;
+#endif
 	case LHCALL_SET_CLOCKEVENT:
 		guest_set_clockevent(cpu, args->arg1);
 		break;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 6e99adbe194..0e9067b0d50 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -128,30 +128,39 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 /*H:205
  * Virtual Interrupts.
  *
- * maybe_do_interrupt() gets called before every entry to the Guest, to see if
- * we should divert the Guest to running an interrupt handler. */
-void maybe_do_interrupt(struct lg_cpu *cpu)
+ * interrupt_pending() returns the first pending interrupt which isn't blocked
+ * by the Guest.  It is called before every entry to the Guest, and just before
+ * we go to sleep when the Guest has halted itself. */
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 {
 	unsigned int irq;
 	DECLARE_BITMAP(blk, LGUEST_IRQS);
-	struct desc_struct *idt;
 
 	/* If the Guest hasn't even initialized yet, we can do nothing. */
 	if (!cpu->lg->lguest_data)
-		return;
+		return LGUEST_IRQS;
 
 	/* Take our "irqs_pending" array and remove any interrupts the Guest
 	 * wants blocked: the result ends up in "blk". */
 	if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
 			   sizeof(blk)))
-		return;
+		return LGUEST_IRQS;
 	bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
 
 	/* Find the first interrupt. */
 	irq = find_first_bit(blk, LGUEST_IRQS);
-	/* None?  Nothing to do */
-	if (irq >= LGUEST_IRQS)
-		return;
+	*more = find_next_bit(blk, LGUEST_IRQS, irq+1);
+
+	return irq;
+}
+
+/* This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending(). */
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
+{
+	struct desc_struct *idt;
+
+	BUG_ON(irq >= LGUEST_IRQS);
 
 	/* They may be in the middle of an iret, where they asked us never to
 	 * deliver interrupts. */
@@ -170,8 +179,12 @@ void maybe_do_interrupt(struct lg_cpu *cpu)
 		u32 irq_enabled;
 		if (get_user(irq_enabled, &cpu->lg->lguest_data->irq_enabled))
 			irq_enabled = 0;
-		if (!irq_enabled)
+		if (!irq_enabled) {
+			/* Make sure they know an IRQ is pending. */
+			put_user(X86_EFLAGS_IF,
+				 &cpu->lg->lguest_data->irq_pending);
 			return;
+		}
 	}
 
 	/* Look at the IDT entry the Guest gave us for this interrupt.  The
@@ -194,6 +207,25 @@ void maybe_do_interrupt(struct lg_cpu *cpu)
 	 * here is a compromise which means at least it gets updated every
 	 * timer interrupt. */
 	write_timestamp(cpu);
+
+	/* If there are no other interrupts we want to deliver, clear
+	 * the pending flag. */
+	if (!more)
+		put_user(0, &cpu->lg->lguest_data->irq_pending);
+}
+
+/* And this is the routine when we want to set an interrupt for the Guest. */
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
+{
+	/* Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt. */
+	set_bit(irq, cpu->irqs_pending);
+
+	/* Make sure it sees it; it might be asleep (eg. halted), or
+	 * running the Guest right now, in which case kick_process()
+	 * will knock it out. */
+	if (!wake_up_process(cpu->tsk))
+		kick_process(cpu->tsk);
 }
 /*:*/
 
@@ -510,10 +542,7 @@ static enum hrtimer_restart clockdev_fn(struct hrtimer *timer)
 	struct lg_cpu *cpu = container_of(timer, struct lg_cpu, hrt);
 
 	/* Remember the first interrupt is the timer interrupt. */
-	set_bit(0, cpu->irqs_pending);
-	/* If the Guest is actually stopped, we need to wake it up. */
-	if (cpu->halted)
-		wake_up_process(cpu->tsk);
+	set_interrupt(cpu, 0);
 	return HRTIMER_NORESTART;
 }
 
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index af92a176697..d4e8979735c 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -49,7 +49,7 @@ struct lg_cpu {
 	u32 cr2;
 	int ts;
 	u32 esp1;
-	u8 ss1;
+	u16 ss1;
 
 	/* Bitmap of what has changed: see CHANGED_* above. */
 	int changed;
@@ -71,9 +71,7 @@ struct lg_cpu {
 	/* Virtual clock device */
 	struct hrtimer hrt;
 
-	/* Do we need to stop what we're doing and return to userspace? */
-	int break_out;
-	wait_queue_head_t break_wq;
+	/* Did the Guest tell us to halt? */
 	int halted;
 
 	/* Pending virtual interrupts */
@@ -82,6 +80,16 @@ struct lg_cpu {
 	struct lg_cpu_arch arch;
 };
 
+struct lg_eventfd {
+	unsigned long addr;
+	struct file *event;
+};
+
+struct lg_eventfd_map {
+	unsigned int num;
+	struct lg_eventfd map[];
+};
+
 /* The private info the thread maintains about the guest. */
 struct lguest
 {
@@ -102,6 +110,8 @@ struct lguest
 	unsigned int stack_pages;
 	u32 tsc_khz;
 
+	struct lg_eventfd_map *eventfds;
+
 	/* Dead? */
 	const char *dead;
 };
@@ -137,9 +147,13 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
  * in the kernel. */
 #define pgd_flags(x)	(pgd_val(x) & ~PAGE_MASK)
 #define pgd_pfn(x)	(pgd_val(x) >> PAGE_SHIFT)
+#define pmd_flags(x)    (pmd_val(x) & ~PAGE_MASK)
+#define pmd_pfn(x)	(pmd_val(x) >> PAGE_SHIFT)
 
 /* interrupts_and_traps.c: */
-void maybe_do_interrupt(struct lg_cpu *cpu);
+unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more);
+void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more);
+void set_interrupt(struct lg_cpu *cpu, unsigned int irq);
 bool deliver_trap(struct lg_cpu *cpu, unsigned int num);
 void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int i,
 			  u32 low, u32 hi);
@@ -150,6 +164,7 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
 void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		const unsigned long *def);
 void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta);
+bool send_notify_to_eventfd(struct lg_cpu *cpu);
 void init_clockdev(struct lg_cpu *cpu);
 bool check_syscall_vector(struct lguest *lg);
 int init_interrupts(void);
@@ -168,7 +183,10 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
 int init_guest_pagetable(struct lguest *lg);
 void free_guest_pagetable(struct lguest *lg);
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable);
+void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#ifdef CONFIG_X86_PAE
 void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 i);
+#endif
 void guest_pagetable_clear_all(struct lg_cpu *cpu);
 void guest_pagetable_flush_user(struct lg_cpu *cpu);
 void guest_set_pte(struct lg_cpu *cpu, unsigned long gpgdir,
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index df44d962626..e082cdac88b 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -228,7 +228,8 @@ extern void lguest_setup_irq(unsigned int irq);
  * function. */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 				    unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				    void (*callback)(struct virtqueue *vq),
+				    const char *name)
 {
 	struct lguest_device *ldev = to_lgdev(vdev);
 	struct lguest_vq_info *lvq;
@@ -263,7 +264,7 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 	/* OK, tell virtio_ring.c to set up a virtqueue now we know its size
 	 * and we've got a pointer to its pages. */
 	vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
-				 vdev, lvq->pages, lg_notify, callback);
+				 vdev, lvq->pages, lg_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto unmap;
@@ -312,6 +313,38 @@ static void lg_del_vq(struct virtqueue *vq)
 	kfree(lvq);
 }
 
+static void lg_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		lg_del_vq(vq);
+}
+
+static int lg_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	struct lguest_device *ldev = to_lgdev(vdev);
+	int i;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > ldev->desc->num_vq)
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = lg_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error;
+	}
+	return 0;
+
+error:
+	lg_del_vqs(vdev);
+	return PTR_ERR(vqs[i]);
+}
+
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
 	.get_features = lg_get_features,
@@ -321,8 +354,8 @@ static struct virtio_config_ops lguest_config_ops = {
 	.get_status = lg_get_status,
 	.set_status = lg_set_status,
 	.reset = lg_reset,
-	.find_vq = lg_find_vq,
-	.del_vq = lg_del_vq,
+	.find_vqs = lg_find_vqs,
+	.del_vqs = lg_del_vqs,
 };
 
 /* The root device for the lguest virtio devices.  This makes them appear as
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index b8ee103eed5..32e29712105 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -7,32 +7,83 @@
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
+#include <linux/eventfd.h>
+#include <linux/file.h>
 #include "lg.h"
 
-/*L:055 When something happens, the Waker process needs a way to stop the
- * kernel running the Guest and return to the Launcher.  So the Waker writes
- * LHREQ_BREAK and the value "1" to /dev/lguest to do this.  Once the Launcher
- * has done whatever needs attention, it writes LHREQ_BREAK and "0" to release
- * the Waker. */
-static int break_guest_out(struct lg_cpu *cpu, const unsigned long __user*input)
+bool send_notify_to_eventfd(struct lg_cpu *cpu)
 {
-	unsigned long on;
+	unsigned int i;
+	struct lg_eventfd_map *map;
+
+	/* lg->eventfds is RCU-protected */
+	rcu_read_lock();
+	map = rcu_dereference(cpu->lg->eventfds);
+	for (i = 0; i < map->num; i++) {
+		if (map->map[i].addr == cpu->pending_notify) {
+			eventfd_signal(map->map[i].event, 1);
+			cpu->pending_notify = 0;
+			break;
+		}
+	}
+	rcu_read_unlock();
+	return cpu->pending_notify == 0;
+}
 
-	/* Fetch whether they're turning break on or off. */
-	if (get_user(on, input) != 0)
-		return -EFAULT;
+static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
+{
+	struct lg_eventfd_map *new, *old = lg->eventfds;
 
-	if (on) {
-		cpu->break_out = 1;
-		/* Pop it out of the Guest (may be running on different CPU) */
-		wake_up_process(cpu->tsk);
-		/* Wait for them to reset it */
-		return wait_event_interruptible(cpu->break_wq, !cpu->break_out);
-	} else {
-		cpu->break_out = 0;
-		wake_up(&cpu->break_wq);
-		return 0;
+	if (!addr)
+		return -EINVAL;
+
+	/* Replace the old array with the new one, carefully: others can
+	 * be accessing it at the same time */
+	new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
+		      GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	/* First make identical copy. */
+	memcpy(new->map, old->map, sizeof(old->map[0]) * old->num);
+	new->num = old->num;
+
+	/* Now append new entry. */
+	new->map[new->num].addr = addr;
+	new->map[new->num].event = eventfd_fget(fd);
+	if (IS_ERR(new->map[new->num].event)) {
+		kfree(new);
+		return PTR_ERR(new->map[new->num].event);
 	}
+	new->num++;
+
+	/* Now put new one in place. */
+	rcu_assign_pointer(lg->eventfds, new);
+
+	/* We're not in a big hurry.  Wait until noone's looking at old
+	 * version, then delete it. */
+	synchronize_rcu();
+	kfree(old);
+
+	return 0;
+}
+
+static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
+{
+	unsigned long addr, fd;
+	int err;
+
+	if (get_user(addr, input) != 0)
+		return -EFAULT;
+	input++;
+	if (get_user(fd, input) != 0)
+		return -EFAULT;
+
+	mutex_lock(&lguest_lock);
+	err = add_eventfd(lg, addr, fd);
+	mutex_unlock(&lguest_lock);
+
+	return 0;
 }
 
 /*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
@@ -45,9 +96,8 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 		return -EFAULT;
 	if (irq >= LGUEST_IRQS)
 		return -EINVAL;
-	/* Next time the Guest runs, the core code will see if it can deliver
-	 * this interrupt. */
-	set_bit(irq, cpu->irqs_pending);
+
+	set_interrupt(cpu, irq);
 	return 0;
 }
 
@@ -126,9 +176,6 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 	 * address. */
 	lguest_arch_setup_regs(cpu, start_ip);
 
-	/* Initialize the queue for the Waker to wait on */
-	init_waitqueue_head(&cpu->break_wq);
-
 	/* We keep a pointer to the Launcher task (ie. current task) for when
 	 * other Guests want to wake this one (eg. console input). */
 	cpu->tsk = current;
@@ -185,6 +232,13 @@ static int initialize(struct file *file, const unsigned long __user *input)
 		goto unlock;
 	}
 
+	lg->eventfds = kmalloc(sizeof(*lg->eventfds), GFP_KERNEL);
+	if (!lg->eventfds) {
+		err = -ENOMEM;
+		goto free_lg;
+	}
+	lg->eventfds->num = 0;
+
 	/* Populate the easy fields of our "struct lguest" */
 	lg->mem_base = (void __user *)args[0];
 	lg->pfn_limit = args[1];
@@ -192,7 +246,7 @@ static int initialize(struct file *file, const unsigned long __user *input)
 	/* This is the first cpu (cpu 0) and it will start booting at args[2] */
 	err = lg_cpu_start(&lg->cpus[0], 0, args[2]);
 	if (err)
-		goto release_guest;
+		goto free_eventfds;
 
 	/* Initialize the Guest's shadow page tables, using the toplevel
 	 * address the Launcher gave us.  This allocates memory, so can fail. */
@@ -211,7 +265,9 @@ static int initialize(struct file *file, const unsigned long __user *input)
 free_regs:
 	/* FIXME: This should be in free_vcpu */
 	free_page(lg->cpus[0].regs_page);
-release_guest:
+free_eventfds:
+	kfree(lg->eventfds);
+free_lg:
 	kfree(lg);
 unlock:
 	mutex_unlock(&lguest_lock);
@@ -252,11 +308,6 @@ static ssize_t write(struct file *file, const char __user *in,
 		/* Once the Guest is dead, you can only read() why it died. */
 		if (lg->dead)
 			return -ENOENT;
-
-		/* If you're not the task which owns the Guest, all you can do
-		 * is break the Launcher out of running the Guest. */
-		if (current != cpu->tsk && req != LHREQ_BREAK)
-			return -EPERM;
 	}
 
 	switch (req) {
@@ -264,8 +315,8 @@ static ssize_t write(struct file *file, const char __user *in,
 		return initialize(file, input);
 	case LHREQ_IRQ:
 		return user_send_irq(cpu, input);
-	case LHREQ_BREAK:
-		return break_guest_out(cpu, input);
+	case LHREQ_EVENTFD:
+		return attach_eventfd(lg, input);
 	default:
 		return -EINVAL;
 	}
@@ -303,6 +354,12 @@ static int close(struct inode *inode, struct file *file)
 		 * the Launcher's memory management structure. */
 		mmput(lg->cpus[i].mm);
 	}
+
+	/* Release any eventfds they registered. */
+	for (i = 0; i < lg->eventfds->num; i++)
+		fput(lg->eventfds->map[i].event);
+	kfree(lg->eventfds);
+
 	/* If lg->dead doesn't contain an error code it will be NULL or a
 	 * kmalloc()ed string, either of which is ok to hand to kfree(). */
 	if (!IS_ERR(lg->dead))
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a059cf9980f..a6fe1abda24 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -53,6 +53,17 @@
  * page.  */
 #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
 
+/* For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.  */
+#ifdef CONFIG_X86_PAE
+#define SWITCHER_PMD_INDEX 	(PTRS_PER_PMD - 1)
+#define RESERVE_MEM 		2U
+#define CHECK_GPGD_MASK		_PAGE_PRESENT
+#else
+#define RESERVE_MEM 		4U
+#define CHECK_GPGD_MASK		_PAGE_TABLE
+#endif
+
 /* We actually need a separate PTE page for each CPU.  Remember that after the
  * Switcher code itself comes two pages for each CPU, and we don't want this
  * CPU's guest to see the pages of any other CPU. */
@@ -73,24 +84,59 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 {
 	unsigned int index = pgd_index(vaddr);
 
+#ifndef CONFIG_X86_PAE
 	/* We kill any Guest trying to touch the Switcher addresses. */
 	if (index >= SWITCHER_PGD_INDEX) {
 		kill_guest(cpu, "attempt to access switcher pages");
 		index = 0;
 	}
+#endif
 	/* Return a pointer index'th pgd entry for the i'th page table. */
 	return &cpu->lg->pgdirs[i].pgdir[index];
 }
 
+#ifdef CONFIG_X86_PAE
+/* This routine then takes the PGD entry given above, which contains the
+ * address of the PMD page.  It then returns a pointer to the PMD entry for the
+ * given address. */
+static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
+{
+	unsigned int index = pmd_index(vaddr);
+	pmd_t *page;
+
+	/* We kill any Guest trying to touch the Switcher addresses. */
+	if (pgd_index(vaddr) == SWITCHER_PGD_INDEX &&
+					index >= SWITCHER_PMD_INDEX) {
+		kill_guest(cpu, "attempt to access switcher pages");
+		index = 0;
+	}
+
+	/* You should never call this if the PGD entry wasn't valid */
+	BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
+	page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
+
+	return &page[index];
+}
+#endif
+
 /* This routine then takes the page directory entry returned above, which
  * contains the address of the page table entry (PTE) page.  It then returns a
  * pointer to the PTE entry for the given address. */
-static pte_t *spte_addr(pgd_t spgd, unsigned long vaddr)
+static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
+#ifdef CONFIG_X86_PAE
+	pmd_t *pmd = spmd_addr(cpu, spgd, vaddr);
+	pte_t *page = __va(pmd_pfn(*pmd) << PAGE_SHIFT);
+
+	/* You should never call this if the PMD entry wasn't valid */
+	BUG_ON(!(pmd_flags(*pmd) & _PAGE_PRESENT));
+#else
 	pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
 	/* You should never call this if the PGD entry wasn't valid */
 	BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
-	return &page[(vaddr >> PAGE_SHIFT) % PTRS_PER_PTE];
+#endif
+
+	return &page[pte_index(vaddr)];
 }
 
 /* These two functions just like the above two, except they access the Guest
@@ -101,12 +147,32 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 	return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index * sizeof(pgd_t);
 }
 
-static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
+#ifdef CONFIG_X86_PAE
+static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
+{
+	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
+	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
+	return gpage + pmd_index(vaddr) * sizeof(pmd_t);
+}
+
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+			       pmd_t gpmd, unsigned long vaddr)
+{
+	unsigned long gpage = pmd_pfn(gpmd) << PAGE_SHIFT;
+
+	BUG_ON(!(pmd_flags(gpmd) & _PAGE_PRESENT));
+	return gpage + pte_index(vaddr) * sizeof(pte_t);
+}
+#else
+static unsigned long gpte_addr(struct lg_cpu *cpu,
+				pgd_t gpgd, unsigned long vaddr)
 {
 	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
+
 	BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
-	return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
+	return gpage + pte_index(vaddr) * sizeof(pte_t);
 }
+#endif
 /*:*/
 
 /*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
@@ -171,7 +237,7 @@ static void release_pte(pte_t pte)
 	/* Remember that get_user_pages_fast() took a reference to the page, in
 	 * get_pfn()?  We have to put it back now. */
 	if (pte_flags(pte) & _PAGE_PRESENT)
-		put_page(pfn_to_page(pte_pfn(pte)));
+		put_page(pte_page(pte));
 }
 /*:*/
 
@@ -184,11 +250,20 @@ static void check_gpte(struct lg_cpu *cpu, pte_t gpte)
 
 static void check_gpgd(struct lg_cpu *cpu, pgd_t gpgd)
 {
-	if ((pgd_flags(gpgd) & ~_PAGE_TABLE) ||
+	if ((pgd_flags(gpgd) & ~CHECK_GPGD_MASK) ||
 	   (pgd_pfn(gpgd) >= cpu->lg->pfn_limit))
 		kill_guest(cpu, "bad page directory entry");
 }
 
+#ifdef CONFIG_X86_PAE
+static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
+{
+	if ((pmd_flags(gpmd) & ~_PAGE_TABLE) ||
+	   (pmd_pfn(gpmd) >= cpu->lg->pfn_limit))
+		kill_guest(cpu, "bad page middle directory entry");
+}
+#endif
+
 /*H:330
  * (i) Looking up a page table entry when the Guest faults.
  *
@@ -207,6 +282,11 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	pte_t gpte;
 	pte_t *spte;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+	pmd_t gpmd;
+#endif
+
 	/* First step: get the top-level Guest page table entry. */
 	gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
 	/* Toplevel not present?  We can't map it in. */
@@ -228,12 +308,45 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		check_gpgd(cpu, gpgd);
 		/* And we copy the flags to the shadow PGD entry.  The page
 		 * number in the shadow PGD is the page we just allocated. */
-		*spgd = __pgd(__pa(ptepage) | pgd_flags(gpgd));
+		set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
 	}
 
+#ifdef CONFIG_X86_PAE
+	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
+	/* middle level not present?  We can't map it in. */
+	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+		return false;
+
+	/* Now look at the matching shadow entry. */
+	spmd = spmd_addr(cpu, *spgd, vaddr);
+
+	if (!(pmd_flags(*spmd) & _PAGE_PRESENT)) {
+		/* No shadow entry: allocate a new shadow PTE page. */
+		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
+
+		/* This is not really the Guest's fault, but killing it is
+		* simple for this corner case. */
+		if (!ptepage) {
+			kill_guest(cpu, "out of memory allocating pte page");
+			return false;
+		}
+
+		/* We check that the Guest pmd is OK. */
+		check_gpmd(cpu, gpmd);
+
+		/* And we copy the flags to the shadow PMD entry.  The page
+		 * number in the shadow PMD is the page we just allocated. */
+		native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
+	}
+
+	/* OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later. */
+	gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
+#else
 	/* OK, now we look at the lower level in the Guest page table: keep its
 	 * address, because we might update it later. */
-	gpte_ptr = gpte_addr(gpgd, vaddr);
+	gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
+#endif
 	gpte = lgread(cpu, gpte_ptr, pte_t);
 
 	/* If this page isn't in the Guest page tables, we can't page it in. */
@@ -259,7 +372,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		gpte = pte_mkdirty(gpte);
 
 	/* Get the pointer to the shadow PTE entry we're going to set. */
-	spte = spte_addr(*spgd, vaddr);
+	spte = spte_addr(cpu, *spgd, vaddr);
 	/* If there was a valid shadow PTE entry here before, we release it.
 	 * This can happen with a write to a previously read-only entry. */
 	release_pte(*spte);
@@ -273,7 +386,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		 * table entry, even if the Guest says it's writable.  That way
 		 * we will come back here when a write does actually occur, so
 		 * we can update the Guest's _PAGE_DIRTY flag. */
-		*spte = gpte_to_spte(cpu, pte_wrprotect(gpte), 0);
+		native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
 	/* Finally, we write the Guest PTE entry back: we've set the
 	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
@@ -301,14 +414,23 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 	pgd_t *spgd;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+#endif
 	/* Look at the current top level entry: is it present? */
 	spgd = spgd_addr(cpu, cpu->cpu_pgd, vaddr);
 	if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
 		return false;
 
+#ifdef CONFIG_X86_PAE
+	spmd = spmd_addr(cpu, *spgd, vaddr);
+	if (!(pmd_flags(*spmd) & _PAGE_PRESENT))
+		return false;
+#endif
+
 	/* Check the flags on the pte entry itself: it must be present and
 	 * writable. */
-	flags = pte_flags(*(spte_addr(*spgd, vaddr)));
+	flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
 
 	return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
 }
@@ -322,8 +444,43 @@ void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
 		kill_guest(cpu, "bad stack page %#lx", vaddr);
 }
 
+#ifdef CONFIG_X86_PAE
+static void release_pmd(pmd_t *spmd)
+{
+	/* If the entry's not present, there's nothing to release. */
+	if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+		unsigned int i;
+		pte_t *ptepage = __va(pmd_pfn(*spmd) << PAGE_SHIFT);
+		/* For each entry in the page, we might need to release it. */
+		for (i = 0; i < PTRS_PER_PTE; i++)
+			release_pte(ptepage[i]);
+		/* Now we can free the page of PTEs */
+		free_page((long)ptepage);
+		/* And zero out the PMD entry so we never release it twice. */
+		native_set_pmd(spmd, __pmd(0));
+	}
+}
+
+static void release_pgd(pgd_t *spgd)
+{
+	/* If the entry's not present, there's nothing to release. */
+	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
+		unsigned int i;
+		pmd_t *pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+		for (i = 0; i < PTRS_PER_PMD; i++)
+			release_pmd(&pmdpage[i]);
+
+		/* Now we can free the page of PMDs */
+		free_page((long)pmdpage);
+		/* And zero out the PGD entry so we never release it twice. */
+		set_pgd(spgd, __pgd(0));
+	}
+}
+
+#else /* !CONFIG_X86_PAE */
 /*H:450 If we chase down the release_pgd() code, it looks like this: */
-static void release_pgd(struct lguest *lg, pgd_t *spgd)
+static void release_pgd(pgd_t *spgd)
 {
 	/* If the entry's not present, there's nothing to release. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
@@ -341,7 +498,7 @@ static void release_pgd(struct lguest *lg, pgd_t *spgd)
 		*spgd = __pgd(0);
 	}
 }
-
+#endif
 /*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
  * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
  * It simply releases every PTE page from 0 up to the Guest's kernel address. */
@@ -350,7 +507,7 @@ static void flush_user_mappings(struct lguest *lg, int idx)
 	unsigned int i;
 	/* Release every pgd entry up to the kernel's address. */
 	for (i = 0; i < pgd_index(lg->kernel_address); i++)
-		release_pgd(lg, lg->pgdirs[idx].pgdir + i);
+		release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
 /*H:440 (v) Flushing (throwing away) page tables,
@@ -369,7 +526,9 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	pgd_t gpgd;
 	pte_t gpte;
-
+#ifdef CONFIG_X86_PAE
+	pmd_t gpmd;
+#endif
 	/* First step: get the top-level Guest page table entry. */
 	gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
 	/* Toplevel not present?  We can't map it in. */
@@ -378,7 +537,14 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
 		return -1UL;
 	}
 
-	gpte = lgread(cpu, gpte_addr(gpgd, vaddr), pte_t);
+#ifdef CONFIG_X86_PAE
+	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
+	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
+		kill_guest(cpu, "Bad address %#lx", vaddr);
+	gpte = lgread(cpu, gpte_addr(cpu, gpmd, vaddr), pte_t);
+#else
+	gpte = lgread(cpu, gpte_addr(cpu, gpgd, vaddr), pte_t);
+#endif
 	if (!(pte_flags(gpte) & _PAGE_PRESENT))
 		kill_guest(cpu, "Bad address %#lx", vaddr);
 
@@ -405,6 +571,9 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 			      int *blank_pgdir)
 {
 	unsigned int next;
+#ifdef CONFIG_X86_PAE
+	pmd_t *pmd_table;
+#endif
 
 	/* We pick one entry at random to throw out.  Choosing the Least
 	 * Recently Used might be better, but this is easy. */
@@ -416,10 +585,27 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 		/* If the allocation fails, just keep using the one we have */
 		if (!cpu->lg->pgdirs[next].pgdir)
 			next = cpu->cpu_pgd;
-		else
-			/* This is a blank page, so there are no kernel
-			 * mappings: caller must map the stack! */
+		else {
+#ifdef CONFIG_X86_PAE
+			/* In PAE mode, allocate a pmd page and populate the
+			 * last pgd entry. */
+			pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
+			if (!pmd_table) {
+				free_page((long)cpu->lg->pgdirs[next].pgdir);
+				set_pgd(cpu->lg->pgdirs[next].pgdir, __pgd(0));
+				next = cpu->cpu_pgd;
+			} else {
+				set_pgd(cpu->lg->pgdirs[next].pgdir +
+					SWITCHER_PGD_INDEX,
+					__pgd(__pa(pmd_table) | _PAGE_PRESENT));
+				/* This is a blank page, so there are no kernel
+				 * mappings: caller must map the stack! */
+				*blank_pgdir = 1;
+			}
+#else
 			*blank_pgdir = 1;
+#endif
+		}
 	}
 	/* Record which Guest toplevel this shadows. */
 	cpu->lg->pgdirs[next].gpgdir = gpgdir;
@@ -431,7 +617,7 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 
 /*H:430 (iv) Switching page tables
  *
- * Now we've seen all the page table setting and manipulation, let's see what
+ * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
  * pgdir).  This occurs on almost every context switch. */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
@@ -460,10 +646,25 @@ static void release_all_pagetables(struct lguest *lg)
 
 	/* Every shadow pagetable this Guest has */
 	for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
-		if (lg->pgdirs[i].pgdir)
+		if (lg->pgdirs[i].pgdir) {
+#ifdef CONFIG_X86_PAE
+			pgd_t *spgd;
+			pmd_t *pmdpage;
+			unsigned int k;
+
+			/* Get the last pmd page. */
+			spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
+			pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
+
+			/* And release the pmd entries of that pmd page,
+			 * except for the switcher pmd. */
+			for (k = 0; k < SWITCHER_PMD_INDEX; k++)
+				release_pmd(&pmdpage[k]);
+#endif
 			/* Every PGD entry except the Switcher at the top */
 			for (j = 0; j < SWITCHER_PGD_INDEX; j++)
-				release_pgd(lg, lg->pgdirs[i].pgdir + j);
+				release_pgd(lg->pgdirs[i].pgdir + j);
+		}
 }
 
 /* We also throw away everything when a Guest tells us it's changed a kernel
@@ -504,24 +705,37 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
 {
 	/* Look up the matching shadow page directory entry. */
 	pgd_t *spgd = spgd_addr(cpu, idx, vaddr);
+#ifdef CONFIG_X86_PAE
+	pmd_t *spmd;
+#endif
 
 	/* If the top level isn't present, there's no entry to update. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
-		/* Otherwise, we start by releasing the existing entry. */
-		pte_t *spte = spte_addr(*spgd, vaddr);
-		release_pte(*spte);
-
-		/* If they're setting this entry as dirty or accessed, we might
-		 * as well put that entry they've given us in now.  This shaves
-		 * 10% off a copy-on-write micro-benchmark. */
-		if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
-			check_gpte(cpu, gpte);
-			*spte = gpte_to_spte(cpu, gpte,
-					     pte_flags(gpte) & _PAGE_DIRTY);
-		} else
-			/* Otherwise kill it and we can demand_page() it in
-			 * later. */
-			*spte = __pte(0);
+#ifdef CONFIG_X86_PAE
+		spmd = spmd_addr(cpu, *spgd, vaddr);
+		if (pmd_flags(*spmd) & _PAGE_PRESENT) {
+#endif
+			/* Otherwise, we start by releasing
+			 * the existing entry. */
+			pte_t *spte = spte_addr(cpu, *spgd, vaddr);
+			release_pte(*spte);
+
+			/* If they're setting this entry as dirty or accessed,
+			 * we might as well put that entry they've given us
+			 * in now.  This shaves 10% off a
+			 * copy-on-write micro-benchmark. */
+			if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
+				check_gpte(cpu, gpte);
+				native_set_pte(spte,
+						gpte_to_spte(cpu, gpte,
+						pte_flags(gpte) & _PAGE_DIRTY));
+			} else
+				/* Otherwise kill it and we can demand_page()
+				 * it in later. */
+				native_set_pte(spte, __pte(0));
+#ifdef CONFIG_X86_PAE
+		}
+#endif
 	}
 }
 
@@ -568,12 +782,10 @@ void guest_set_pte(struct lg_cpu *cpu,
  *
  * So with that in mind here's our code to to update a (top-level) PGD entry:
  */
-void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
+void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 {
 	int pgdir;
 
-	/* The kernel seems to try to initialize this early on: we ignore its
-	 * attempts to map over the Switcher. */
 	if (idx >= SWITCHER_PGD_INDEX)
 		return;
 
@@ -581,8 +793,14 @@ void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 	pgdir = find_pgdir(lg, gpgdir);
 	if (pgdir < ARRAY_SIZE(lg->pgdirs))
 		/* ... throw it away. */
-		release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx);
+		release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
+#ifdef CONFIG_X86_PAE
+void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
+{
+	guest_pagetable_clear_all(&lg->cpus[0]);
+}
+#endif
 
 /* Once we know how much memory we have we can construct simple identity
  * (which set virtual == physical) and linear mappings
@@ -596,8 +814,16 @@ static unsigned long setup_pagetables(struct lguest *lg,
 {
 	pgd_t __user *pgdir;
 	pte_t __user *linear;
-	unsigned int mapped_pages, i, linear_pages, phys_linear;
 	unsigned long mem_base = (unsigned long)lg->mem_base;
+	unsigned int mapped_pages, i, linear_pages;
+#ifdef CONFIG_X86_PAE
+	pmd_t __user *pmds;
+	unsigned int j;
+	pgd_t pgd;
+	pmd_t pmd;
+#else
+	unsigned int phys_linear;
+#endif
 
 	/* We have mapped_pages frames to map, so we need
 	 * linear_pages page tables to map them. */
@@ -610,6 +836,9 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	/* Now we use the next linear_pages pages as pte pages */
 	linear = (void *)pgdir - linear_pages * PAGE_SIZE;
 
+#ifdef CONFIG_X86_PAE
+	pmds = (void *)linear - PAGE_SIZE;
+#endif
 	/* Linear mapping is easy: put every page's address into the
 	 * mapping in order. */
 	for (i = 0; i < mapped_pages; i++) {
@@ -621,6 +850,22 @@ static unsigned long setup_pagetables(struct lguest *lg,
 
 	/* The top level points to the linear page table pages above.
 	 * We setup the identity and linear mappings here. */
+#ifdef CONFIG_X86_PAE
+	for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
+	     i += PTRS_PER_PTE, j++) {
+		native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
+		- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+
+		if (copy_to_user(&pmds[j], &pmd, sizeof(pmd)) != 0)
+			return -EFAULT;
+	}
+
+	set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+	if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
+		return -EFAULT;
+	if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
+		return -EFAULT;
+#else
 	phys_linear = (unsigned long)linear - mem_base;
 	for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
 		pgd_t pgd;
@@ -633,6 +878,7 @@ static unsigned long setup_pagetables(struct lguest *lg,
 				    &pgd, sizeof(pgd)))
 			return -EFAULT;
 	}
+#endif
 
 	/* We return the top level (guest-physical) address: remember where
 	 * this is. */
@@ -648,7 +894,10 @@ int init_guest_pagetable(struct lguest *lg)
 	u64 mem;
 	u32 initrd_size;
 	struct boot_params __user *boot = (struct boot_params *)lg->mem_base;
-
+#ifdef CONFIG_X86_PAE
+	pgd_t *pgd;
+	pmd_t *pmd_table;
+#endif
 	/* Get the Guest memory size and the ramdisk size from the boot header
 	 * located at lg->mem_base (Guest address 0). */
 	if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
@@ -663,6 +912,15 @@ int init_guest_pagetable(struct lguest *lg)
 	lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	if (!lg->pgdirs[0].pgdir)
 		return -ENOMEM;
+#ifdef CONFIG_X86_PAE
+	pgd = lg->pgdirs[0].pgdir;
+	pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
+	if (!pmd_table)
+		return -ENOMEM;
+
+	set_pgd(pgd + SWITCHER_PGD_INDEX,
+		__pgd(__pa(pmd_table) | _PAGE_PRESENT));
+#endif
 	lg->cpus[0].cpu_pgd = 0;
 	return 0;
 }
@@ -672,17 +930,24 @@ void page_table_guest_data_init(struct lg_cpu *cpu)
 {
 	/* We get the kernel address: above this is all kernel memory. */
 	if (get_user(cpu->lg->kernel_address,
-		     &cpu->lg->lguest_data->kernel_address)
-	    /* We tell the Guest that it can't use the top 4MB of virtual
-	     * addresses used by the Switcher. */
-	    || put_user(4U*1024*1024, &cpu->lg->lguest_data->reserve_mem)
-	    || put_user(cpu->lg->pgdirs[0].gpgdir, &cpu->lg->lguest_data->pgdir))
+		&cpu->lg->lguest_data->kernel_address)
+		/* We tell the Guest that it can't use the top 2 or 4 MB
+		 * of virtual addresses used by the Switcher. */
+		|| put_user(RESERVE_MEM * 1024 * 1024,
+			&cpu->lg->lguest_data->reserve_mem)
+		|| put_user(cpu->lg->pgdirs[0].gpgdir,
+			&cpu->lg->lguest_data->pgdir))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
 	/* In flush_user_mappings() we loop from 0 to
 	 * "pgd_index(lg->kernel_address)".  This assumes it won't hit the
 	 * Switcher mappings, so check that now. */
+#ifdef CONFIG_X86_PAE
+	if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
+		pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
+#else
 	if (pgd_index(cpu->lg->kernel_address) >= SWITCHER_PGD_INDEX)
+#endif
 		kill_guest(cpu, "bad kernel address %#lx",
 				 cpu->lg->kernel_address);
 }
@@ -708,16 +973,30 @@ void free_guest_pagetable(struct lguest *lg)
 void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
 	pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
-	pgd_t switcher_pgd;
 	pte_t regs_pte;
 	unsigned long pfn;
 
+#ifdef CONFIG_X86_PAE
+	pmd_t switcher_pmd;
+	pmd_t *pmd_table;
+
+	native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
+		       PAGE_SHIFT, PAGE_KERNEL_EXEC));
+
+	pmd_table = __va(pgd_pfn(cpu->lg->
+			pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
+								<< PAGE_SHIFT);
+	native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
+#else
+	pgd_t switcher_pgd;
+
 	/* Make the last PGD entry for this Guest point to the Switcher's PTE
 	 * page for this CPU (with appropriate flags). */
-	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL);
+	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
 
 	cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
 
+#endif
 	/* We also change the Switcher PTE page.  When we're running the Guest,
 	 * we want the Guest's "regs" page to appear where the first Switcher
 	 * page for this CPU is.  This is an optimization: when the Switcher
@@ -726,8 +1005,9 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 	 * page is already mapped there, we don't have to copy them out
 	 * again. */
 	pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
-	regs_pte = pfn_pte(pfn, __pgprot(__PAGE_KERNEL));
-	switcher_pte_page[(unsigned long)pages/PAGE_SIZE%PTRS_PER_PTE] = regs_pte;
+	native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
+	native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
+			regs_pte);
 }
 /*:*/
 
@@ -752,21 +1032,21 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
 
 	/* The first entries are easy: they map the Switcher code. */
 	for (i = 0; i < pages; i++) {
-		pte[i] = mk_pte(switcher_page[i],
-				__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+		native_set_pte(&pte[i], mk_pte(switcher_page[i],
+				__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 	}
 
 	/* The only other thing we map is this CPU's pair of pages. */
 	i = pages + cpu*2;
 
 	/* First page (Guest registers) is writable from the Guest */
-	pte[i] = pfn_pte(page_to_pfn(switcher_page[i]),
-			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW));
+	native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
+			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
 	/* The second page contains the "struct lguest_ro_state", and is
 	 * read-only. */
-	pte[i+1] = pfn_pte(page_to_pfn(switcher_page[i+1]),
-			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
+	native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
+			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
 /* We've made it through the page table code.  Perhaps our tired brains are
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 7ede64ffeef..482ed5a1875 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -150,7 +150,7 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
 	/* We assume the Guest has the same number of GDT entries as the
 	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
-	if (num > ARRAY_SIZE(cpu->arch.gdt))
+	if (num >= ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
 	/* Set it up, then fix it. */
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 1a83910f674..eaf722fe309 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -358,6 +358,16 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
 			if (emulate_insn(cpu))
 				return;
 		}
+		/* If KVM is active, the vmcall instruction triggers a
+		 * General Protection Fault.  Normally it triggers an
+		 * invalid opcode fault (6): */
+	case 6:
+		/* We need to check if ring == GUEST_PL and
+		 * faulting instruction == vmcall. */
+		if (is_hypercall(cpu)) {
+			rewrite_hypercall(cpu);
+			return;
+		}
 		break;
 	case 14: /* We've intercepted a Page Fault. */
 		/* The Guest accessed a virtual address that wasn't mapped.
@@ -403,15 +413,6 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
 		 * up the pointer now to indicate a hypercall is pending. */
 		cpu->hcall = (struct hcall_args *)cpu->regs;
 		return;
-	case 6:
-		/* kvm hypercalls trigger an invalid opcode fault (6).
-		 * We need to check if ring == GUEST_PL and
-		 * faulting instruction == vmcall. */
-		if (is_hypercall(cpu)) {
-			rewrite_hypercall(cpu);
-			return;
-		}
-		break;
 	}
 
 	/* We didn't handle the trap, so it needs to go to the Guest. */
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 47c68bc75a1..3319c2fec28 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -232,7 +232,7 @@ static struct page *read_sb_page(mddev_t *mddev, long offset,
 		target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
 
 		if (sync_page_io(rdev->bdev, target,
-				 roundup(size, bdev_hardsect_size(rdev->bdev)),
+				 roundup(size, bdev_logical_block_size(rdev->bdev)),
 				 page, READ)) {
 			page->index = index;
 			attach_page_buffers(page, NULL); /* so that free_buffer will
@@ -287,7 +287,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 			int size = PAGE_SIZE;
 			if (page->index == bitmap->file_pages-1)
 				size = roundup(bitmap->last_page_size,
-					       bdev_hardsect_size(rdev->bdev));
+					       bdev_logical_block_size(rdev->bdev));
 			/* Just make sure we aren't corrupting data or
 			 * metadata
 			 */
@@ -1097,14 +1097,12 @@ void bitmap_daemon_work(struct bitmap *bitmap)
 	}
 	bitmap->allclean = 1;
 
+	spin_lock_irqsave(&bitmap->lock, flags);
 	for (j = 0; j < bitmap->chunks; j++) {
 		bitmap_counter_t *bmc;
-		spin_lock_irqsave(&bitmap->lock, flags);
-		if (!bitmap->filemap) {
+		if (!bitmap->filemap)
 			/* error or shutdown */
-			spin_unlock_irqrestore(&bitmap->lock, flags);
 			break;
-		}
 
 		page = filemap_get_page(bitmap, j);
 
@@ -1121,6 +1119,8 @@ void bitmap_daemon_work(struct bitmap *bitmap)
 					write_page(bitmap, page, 0);
 					bitmap->allclean = 0;
 				}
+				spin_lock_irqsave(&bitmap->lock, flags);
+				j |= (PAGE_BITS - 1);
 				continue;
 			}
 
@@ -1181,9 +1181,10 @@ void bitmap_daemon_work(struct bitmap *bitmap)
 					ext2_clear_bit(file_page_offset(j), paddr);
 				kunmap_atomic(paddr, KM_USER0);
 			}
-		}
-		spin_unlock_irqrestore(&bitmap->lock, flags);
+		} else
+			j |= PAGE_COUNTER_MASK;
 	}
+	spin_unlock_irqrestore(&bitmap->lock, flags);
 
 	/* now sync the final page */
 	if (lastpage != NULL) {
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index a2e26c24214..75d8081a904 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -178,7 +178,7 @@ static int set_chunk_size(struct dm_exception_store *store,
 	}
 
 	/* Validate the chunk size against the device block size */
-	if (chunk_size_ulong % (bdev_hardsect_size(store->cow->bdev) >> 9)) {
+	if (chunk_size_ulong % (bdev_logical_block_size(store->cow->bdev) >> 9)) {
 		*error = "Chunk size is not a multiple of device blocksize";
 		return -EINVAL;
 	}
diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c
index be233bc4d91..6fa8ccf91c7 100644
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -413,7 +413,8 @@ static int create_log_context(struct dm_dirty_log *log, struct dm_target *ti,
 		 * Buffer holds both header and bitset.
 		 */
 		buf_size = dm_round_up((LOG_OFFSET << SECTOR_SHIFT) +
-				       bitset_size, ti->limits.hardsect_size);
+				       bitset_size,
+				       ti->limits.logical_block_size);
 
 		if (buf_size > dev->bdev->bd_inode->i_size) {
 			DMWARN("log device %s too small: need %llu bytes",
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index e75c6dd76a9..2662a41337e 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -282,7 +282,7 @@ static int read_header(struct pstore *ps, int *new_snapshot)
 	 */
 	if (!ps->store->chunk_size) {
 		ps->store->chunk_size = max(DM_CHUNK_SIZE_DEFAULT_SECTORS,
-		    bdev_hardsect_size(ps->store->cow->bdev) >> 9);
+		    bdev_logical_block_size(ps->store->cow->bdev) >> 9);
 		ps->store->chunk_mask = ps->store->chunk_size - 1;
 		ps->store->chunk_shift = ffs(ps->store->chunk_size) - 1;
 		chunk_size_supplied = 0;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 429b50b975d..e9a73bb242b 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -108,7 +108,8 @@ static void combine_restrictions_low(struct io_restrictions *lhs,
 	lhs->max_hw_segments =
 		min_not_zero(lhs->max_hw_segments, rhs->max_hw_segments);
 
-	lhs->hardsect_size = max(lhs->hardsect_size, rhs->hardsect_size);
+	lhs->logical_block_size = max(lhs->logical_block_size,
+				      rhs->logical_block_size);
 
 	lhs->max_segment_size =
 		min_not_zero(lhs->max_segment_size, rhs->max_segment_size);
@@ -509,7 +510,7 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev)
 	 *        combine_restrictions_low()
 	 */
 	rs->max_sectors =
-		min_not_zero(rs->max_sectors, q->max_sectors);
+		min_not_zero(rs->max_sectors, queue_max_sectors(q));
 
 	/*
 	 * Check if merge fn is supported.
@@ -524,24 +525,25 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev)
 
 	rs->max_phys_segments =
 		min_not_zero(rs->max_phys_segments,
-			     q->max_phys_segments);
+			     queue_max_phys_segments(q));
 
 	rs->max_hw_segments =
-		min_not_zero(rs->max_hw_segments, q->max_hw_segments);
+		min_not_zero(rs->max_hw_segments, queue_max_hw_segments(q));
 
-	rs->hardsect_size = max(rs->hardsect_size, q->hardsect_size);
+	rs->logical_block_size = max(rs->logical_block_size,
+				     queue_logical_block_size(q));
 
 	rs->max_segment_size =
-		min_not_zero(rs->max_segment_size, q->max_segment_size);
+		min_not_zero(rs->max_segment_size, queue_max_segment_size(q));
 
 	rs->max_hw_sectors =
-		min_not_zero(rs->max_hw_sectors, q->max_hw_sectors);
+		min_not_zero(rs->max_hw_sectors, queue_max_hw_sectors(q));
 
 	rs->seg_boundary_mask =
 		min_not_zero(rs->seg_boundary_mask,
-			     q->seg_boundary_mask);
+			     queue_segment_boundary(q));
 
-	rs->bounce_pfn = min_not_zero(rs->bounce_pfn, q->bounce_pfn);
+	rs->bounce_pfn = min_not_zero(rs->bounce_pfn, queue_bounce_pfn(q));
 
 	rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
 }
@@ -683,8 +685,8 @@ static void check_for_valid_limits(struct io_restrictions *rs)
 		rs->max_phys_segments = MAX_PHYS_SEGMENTS;
 	if (!rs->max_hw_segments)
 		rs->max_hw_segments = MAX_HW_SEGMENTS;
-	if (!rs->hardsect_size)
-		rs->hardsect_size = 1 << SECTOR_SHIFT;
+	if (!rs->logical_block_size)
+		rs->logical_block_size = 1 << SECTOR_SHIFT;
 	if (!rs->max_segment_size)
 		rs->max_segment_size = MAX_SEGMENT_SIZE;
 	if (!rs->seg_boundary_mask)
@@ -912,13 +914,13 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q)
 	 * restrictions.
 	 */
 	blk_queue_max_sectors(q, t->limits.max_sectors);
-	q->max_phys_segments = t->limits.max_phys_segments;
-	q->max_hw_segments = t->limits.max_hw_segments;
-	q->hardsect_size = t->limits.hardsect_size;
-	q->max_segment_size = t->limits.max_segment_size;
-	q->max_hw_sectors = t->limits.max_hw_sectors;
-	q->seg_boundary_mask = t->limits.seg_boundary_mask;
-	q->bounce_pfn = t->limits.bounce_pfn;
+	blk_queue_max_phys_segments(q, t->limits.max_phys_segments);
+	blk_queue_max_hw_segments(q, t->limits.max_hw_segments);
+	blk_queue_logical_block_size(q, t->limits.logical_block_size);
+	blk_queue_max_segment_size(q, t->limits.max_segment_size);
+	blk_queue_max_hw_sectors(q, t->limits.max_hw_sectors);
+	blk_queue_segment_boundary(q, t->limits.seg_boundary_mask);
+	blk_queue_bounce_limit(q, t->limits.bounce_pfn);
 
 	if (t->limits.no_cluster)
 		queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 424f7b048c3..3fd8b1e6548 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -20,7 +20,8 @@
 #include <linux/idr.h>
 #include <linux/hdreg.h>
 #include <linux/blktrace_api.h>
-#include <trace/block.h>
+
+#include <trace/events/block.h>
 
 #define DM_MSG_PREFIX "core"
 
@@ -53,8 +54,6 @@ struct dm_target_io {
 	union map_info info;
 };
 
-DEFINE_TRACE(block_bio_complete);
-
 /*
  * For request-based dm.
  * One of these is allocated per request.
@@ -656,8 +655,7 @@ static void __map_bio(struct dm_target *ti, struct bio *clone,
 		/* the bio has been remapped so dispatch it */
 
 		trace_block_remap(bdev_get_queue(clone->bi_bdev), clone,
-				    tio->io->bio->bi_bdev->bd_dev,
-				    clone->bi_sector, sector);
+				    tio->io->bio->bi_bdev->bd_dev, sector);
 
 		generic_make_request(clone);
 	} else if (r < 0 || r == DM_MAPIO_REQUEUE) {
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 7a36e38393a..64f1f3e046e 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -146,7 +146,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
 		 * a one page request is never in violation.
 		 */
 		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    mddev->queue->max_sectors > (PAGE_SIZE>>9))
+		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
 			blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 		disk->num_sectors = rdev->sectors;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index fccc8343a25..20f6ac33834 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1202,7 +1202,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 	atomic_set(&rdev->corrected_errors, le32_to_cpu(sb->cnt_corrected_read));
 
 	rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256;
-	bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1;
+	bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
 	if (rdev->sb_size & bmask)
 		rdev->sb_size = (rdev->sb_size | bmask) + 1;
 
@@ -1375,6 +1375,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 
 	sb->raid_disks = cpu_to_le32(mddev->raid_disks);
 	sb->size = cpu_to_le64(mddev->dev_sectors);
+	sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9);
+	sb->level = cpu_to_le32(mddev->level);
+	sb->layout = cpu_to_le32(mddev->layout);
 
 	if (mddev->bitmap && mddev->bitmap_file == NULL) {
 		sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
@@ -3303,7 +3306,9 @@ static ssize_t
 action_show(mddev_t *mddev, char *page)
 {
 	char *type = "idle";
-	if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
+	if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery))
+		type = "frozen";
+	else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
 	    (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) {
 		if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
 			type = "reshape";
@@ -3326,7 +3331,12 @@ action_store(mddev_t *mddev, const char *page, size_t len)
 	if (!mddev->pers || !mddev->pers->sync_request)
 		return -EINVAL;
 
-	if (cmd_match(page, "idle")) {
+	if (cmd_match(page, "frozen"))
+		set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+	else
+		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+	if (cmd_match(page, "idle") || cmd_match(page, "frozen")) {
 		if (mddev->sync_thread) {
 			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 			md_unregister_thread(mddev->sync_thread);
@@ -3680,7 +3690,7 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len)
 		if (strict_blocks_to_sectors(buf, &sectors) < 0)
 			return -EINVAL;
 		if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors)
-			return -EINVAL;
+			return -E2BIG;
 
 		mddev->external_size = 1;
 	}
@@ -5557,7 +5567,7 @@ static struct block_device_operations md_fops =
 	.owner		= THIS_MODULE,
 	.open		= md_open,
 	.release	= md_release,
-	.locked_ioctl	= md_ioctl,
+	.ioctl		= md_ioctl,
 	.getgeo		= md_getgeo,
 	.media_changed	= md_media_changed,
 	.revalidate_disk= md_revalidate,
@@ -6352,12 +6362,13 @@ void md_do_sync(mddev_t *mddev)
 
 		skipped = 0;
 
-		if ((mddev->curr_resync > mddev->curr_resync_completed &&
-		     (mddev->curr_resync - mddev->curr_resync_completed)
-		    > (max_sectors >> 4)) ||
-		    (j - mddev->curr_resync_completed)*2
-		    >= mddev->resync_max - mddev->curr_resync_completed
-			) {
+		if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
+		    ((mddev->curr_resync > mddev->curr_resync_completed &&
+		      (mddev->curr_resync - mddev->curr_resync_completed)
+		      > (max_sectors >> 4)) ||
+		     (j - mddev->curr_resync_completed)*2
+		     >= mddev->resync_max - mddev->curr_resync_completed
+			    )) {
 			/* time to update curr_resync_completed */
 			blk_unplug(mddev->queue);
 			wait_event(mddev->recovery_wait,
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 41ced0cbe82..4ee31aa13c4 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -303,7 +303,7 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 		 * merge_bvec_fn will be involved in multipath.)
 		 */
 			if (q->merge_bvec_fn &&
-			    mddev->queue->max_sectors > (PAGE_SIZE>>9))
+			    queue_max_sectors(q) > (PAGE_SIZE>>9))
 				blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 			conf->working_disks++;
@@ -467,7 +467,7 @@ static int multipath_run (mddev_t *mddev)
 		 * violating it, not that we ever expect a device with
 		 * a merge_bvec_fn to be involved in multipath */
 		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    mddev->queue->max_sectors > (PAGE_SIZE>>9))
+		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
 			blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 		if (!test_bit(Faulty, &rdev->flags))
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index c08d7559be5..925507e7d67 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -144,7 +144,7 @@ static int create_strip_zones (mddev_t *mddev)
 		 */
 
 		if (rdev1->bdev->bd_disk->queue->merge_bvec_fn &&
-		    mddev->queue->max_sectors > (PAGE_SIZE>>9))
+		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
 			blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 		if (!smallest || (rdev1->sectors < smallest->sectors))
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 36df9109cde..e23758b4a34 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1130,7 +1130,7 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 			 * a one page request is never in violation.
 			 */
 			if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-			    mddev->queue->max_sectors > (PAGE_SIZE>>9))
+			    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
 				blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 			p->head_position = 0;
@@ -1996,7 +1996,7 @@ static int run(mddev_t *mddev)
 		 * a one page request is never in violation.
 		 */
 		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    mddev->queue->max_sectors > (PAGE_SIZE>>9))
+		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
 			blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 		disk->head_position = 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 499620afb44..750550c1166 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1158,8 +1158,8 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 			 * a one page request is never in violation.
 			 */
 			if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-			    mddev->queue->max_sectors > (PAGE_SIZE>>9))
-				mddev->queue->max_sectors = (PAGE_SIZE>>9);
+			    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
+				blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 			p->head_position = 0;
 			rdev->raid_disk = mirror;
@@ -2145,8 +2145,8 @@ static int run(mddev_t *mddev)
 		 * a one page request is never in violation.
 		 */
 		if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
-		    mddev->queue->max_sectors > (PAGE_SIZE>>9))
-			mddev->queue->max_sectors = (PAGE_SIZE>>9);
+		    queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
+			blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
 
 		disk->head_position = 0;
 	}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 4616bc3a6e7..bef87669823 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -362,7 +362,7 @@ static void raid5_unplug_device(struct request_queue *q);
 
 static struct stripe_head *
 get_active_stripe(raid5_conf_t *conf, sector_t sector,
-		  int previous, int noblock)
+		  int previous, int noblock, int noquiesce)
 {
 	struct stripe_head *sh;
 
@@ -372,7 +372,7 @@ get_active_stripe(raid5_conf_t *conf, sector_t sector,
 
 	do {
 		wait_event_lock_irq(conf->wait_for_stripe,
-				    conf->quiesce == 0,
+				    conf->quiesce == 0 || noquiesce,
 				    conf->device_lock, /* nothing */);
 		sh = __find_stripe(conf, sector, conf->generation - previous);
 		if (!sh) {
@@ -2671,7 +2671,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh,
 			sector_t bn = compute_blocknr(sh, i, 1);
 			sector_t s = raid5_compute_sector(conf, bn, 0,
 							  &dd_idx, NULL);
-			sh2 = get_active_stripe(conf, s, 0, 1);
+			sh2 = get_active_stripe(conf, s, 0, 1, 1);
 			if (sh2 == NULL)
 				/* so far only the early blocks of this stripe
 				 * have been requested.  When later blocks
@@ -2944,7 +2944,7 @@ static bool handle_stripe5(struct stripe_head *sh)
 	/* Finish reconstruct operations initiated by the expansion process */
 	if (sh->reconstruct_state == reconstruct_state_result) {
 		struct stripe_head *sh2
-			= get_active_stripe(conf, sh->sector, 1, 1);
+			= get_active_stripe(conf, sh->sector, 1, 1, 1);
 		if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
 			/* sh cannot be written until sh2 has been read.
 			 * so arrange for sh to be delayed a little
@@ -3189,7 +3189,7 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 
 	if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
 		struct stripe_head *sh2
-			= get_active_stripe(conf, sh->sector, 1, 1);
+			= get_active_stripe(conf, sh->sector, 1, 1, 1);
 		if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
 			/* sh cannot be written until sh2 has been read.
 			 * so arrange for sh to be delayed a little
@@ -3288,7 +3288,7 @@ static void unplug_slaves(mddev_t *mddev)
 	int i;
 
 	rcu_read_lock();
-	for (i=0; i<mddev->raid_disks; i++) {
+	for (i = 0; i < conf->raid_disks; i++) {
 		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
 		if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
 			struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
@@ -3463,10 +3463,10 @@ static int bio_fits_rdev(struct bio *bi)
 {
 	struct request_queue *q = bdev_get_queue(bi->bi_bdev);
 
-	if ((bi->bi_size>>9) > q->max_sectors)
+	if ((bi->bi_size>>9) > queue_max_sectors(q))
 		return 0;
 	blk_recount_segments(q, bi);
-	if (bi->bi_phys_segments > q->max_phys_segments)
+	if (bi->bi_phys_segments > queue_max_phys_segments(q))
 		return 0;
 
 	if (q->merge_bvec_fn)
@@ -3675,7 +3675,7 @@ static int make_request(struct request_queue *q, struct bio * bi)
 			(unsigned long long)logical_sector);
 
 		sh = get_active_stripe(conf, new_sector, previous,
-				       (bi->bi_rw&RWA_MASK));
+				       (bi->bi_rw&RWA_MASK), 0);
 		if (sh) {
 			if (unlikely(previous)) {
 				/* expansion might have moved on while waiting for a
@@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 	safepos = conf->reshape_safe;
 	sector_div(safepos, data_disks);
 	if (mddev->delta_disks < 0) {
-		writepos -= reshape_sectors;
+		writepos -= min_t(sector_t, reshape_sectors, writepos);
 		readpos += reshape_sectors;
 		safepos += reshape_sectors;
 	} else {
 		writepos += reshape_sectors;
-		readpos -= reshape_sectors;
-		safepos -= reshape_sectors;
+		readpos -= min_t(sector_t, reshape_sectors, readpos);
+		safepos -= min_t(sector_t, reshape_sectors, safepos);
 	}
 
 	/* 'writepos' is the most advanced device address we might write.
@@ -3873,7 +3873,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 	for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
 		int j;
 		int skipped = 0;
-		sh = get_active_stripe(conf, stripe_addr+i, 0, 0);
+		sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1);
 		set_bit(STRIPE_EXPANDING, &sh->state);
 		atomic_inc(&conf->reshape_stripes);
 		/* If any of this stripe is beyond the end of the old
@@ -3916,13 +3916,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		raid5_compute_sector(conf, stripe_addr*(new_data_disks),
 				     1, &dd_idx, NULL);
 	last_sector =
-		raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512)
+		raid5_compute_sector(conf, ((stripe_addr+reshape_sectors)
 					    *(new_data_disks) - 1),
 				     1, &dd_idx, NULL);
 	if (last_sector >= mddev->dev_sectors)
 		last_sector = mddev->dev_sectors - 1;
 	while (first_sector <= last_sector) {
-		sh = get_active_stripe(conf, first_sector, 1, 0);
+		sh = get_active_stripe(conf, first_sector, 1, 0, 1);
 		set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
 		set_bit(STRIPE_HANDLE, &sh->state);
 		release_stripe(sh);
@@ -4022,9 +4022,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
 
 	bitmap_cond_end_sync(mddev->bitmap, sector_nr);
 
-	sh = get_active_stripe(conf, sector_nr, 0, 1);
+	sh = get_active_stripe(conf, sector_nr, 0, 1, 0);
 	if (sh == NULL) {
-		sh = get_active_stripe(conf, sector_nr, 0, 0);
+		sh = get_active_stripe(conf, sector_nr, 0, 0, 0);
 		/* make sure we don't swamp the stripe cache if someone else
 		 * is trying to get access
 		 */
@@ -4034,7 +4034,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
 	 * We don't need to check the 'failed' flag as when that gets set,
 	 * recovery aborts.
 	 */
-	for (i=0; i<mddev->raid_disks; i++)
+	for (i = 0; i < conf->raid_disks; i++)
 		if (conf->disks[i].rdev == NULL)
 			still_degraded = 1;
 
@@ -4086,7 +4086,7 @@ static int  retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio)
 			/* already done this stripe */
 			continue;
 
-		sh = get_active_stripe(conf, sector, 0, 1);
+		sh = get_active_stripe(conf, sector, 0, 1, 0);
 
 		if (!sh) {
 			/* failed to get a stripe - must wait */
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 60955a70d88..1bb66e1ed5a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
 	help
 	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
 	  firmware protocol used by this module is similar to the one used by the
-	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
 
 config DVB_USB_DTT200U
 	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2fb01..57835f5715f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -758,10 +758,14 @@ config VIDEO_MX1
 	---help---
 	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 
+config MX3_VIDEO
+	bool
+
 config VIDEO_MX3
 	tristate "i.MX3x Camera Sensor Interface driver"
 	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
+	select MX3_VIDEO
 	---help---
 	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 3e6ffee8dfe..ccd47f57f42 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -181,7 +181,7 @@ static int hdpvr_submit_buffers(struct hdpvr_device *dev)
 				 buff_list);
 		if (buf->status != BUFSTAT_AVAILABLE) {
 			v4l2_err(&dev->v4l2_dev,
-				 "buffer not marked as availbale\n");
+				 "buffer not marked as available\n");
 			ret = -EFAULT;
 			goto err;
 		}
diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c
index ff7b7deded4..7fde36e6d22 100644
--- a/drivers/media/video/ivtv/ivtv-queue.c
+++ b/drivers/media/video/ivtv/ivtv-queue.c
@@ -230,7 +230,8 @@ int ivtv_stream_alloc(struct ivtv_stream *s)
 		return -ENOMEM;
 	}
 	if (ivtv_might_use_dma(s)) {
-		s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma);
+		s->sg_handle = pci_map_single(itv->pdev, s->sg_dma,
+				sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE);
 		ivtv_stream_sync_for_cpu(s);
 	}
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index de143deb06f..7847bbc1440 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -672,15 +672,14 @@ try_again:
 					       msb->req_sg);
 
 		if (!msb->seg_count) {
-			chunk = __blk_end_request(msb->block_req, -ENOMEM,
-					blk_rq_cur_bytes(msb->block_req));
+			chunk = __blk_end_request_cur(msb->block_req, -ENOMEM);
 			continue;
 		}
 
-		t_sec = msb->block_req->sector << 9;
+		t_sec = blk_rq_pos(msb->block_req) << 9;
 		sector_div(t_sec, msb->page_size);
 
-		count = msb->block_req->nr_sectors << 9;
+		count = blk_rq_bytes(msb->block_req);
 		count /= msb->page_size;
 
 		param.system = msb->system;
@@ -705,8 +704,8 @@ try_again:
 		return 0;
 	}
 
-	dev_dbg(&card->dev, "elv_next\n");
-	msb->block_req = elv_next_request(msb->queue);
+	dev_dbg(&card->dev, "blk_fetch\n");
+	msb->block_req = blk_fetch_request(msb->queue);
 	if (!msb->block_req) {
 		dev_dbg(&card->dev, "issue end\n");
 		return -EAGAIN;
@@ -745,7 +744,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error)
 					t_len *= msb->page_size;
 			}
 		} else
-			t_len = msb->block_req->nr_sectors << 9;
+			t_len = blk_rq_bytes(msb->block_req);
 
 		dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error);
 
@@ -825,8 +824,8 @@ static void mspro_block_submit_req(struct request_queue *q)
 		return;
 
 	if (msb->eject) {
-		while ((req = elv_next_request(q)) != NULL)
-			__blk_end_request(req, -ENODEV, blk_rq_bytes(req));
+		while ((req = blk_fetch_request(q)) != NULL)
+			__blk_end_request_all(req, -ENODEV);
 
 		return;
 	}
@@ -1243,7 +1242,7 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 
 	sprintf(msb->disk->disk_name, "mspblk%d", disk_id);
 
-	blk_queue_hardsect_size(msb->queue, msb->page_size);
+	blk_queue_logical_block_size(msb->queue, msb->page_size);
 
 	capacity = be16_to_cpu(sys_info->user_block_count);
 	capacity *= be16_to_cpu(sys_info->block_size);
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 693e4b51135..fa9249b4971 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -130,7 +130,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -190,7 +190,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notificaiton.
+ *                      asynchronous notification.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -623,7 +623,7 @@ mpi_fc.h
  *  11-02-00  01.01.01  Original release for post 1.0 work
  *  12-04-00  01.01.02  Added messages for Common Transport Send and
  *                      Primitive Send.
- *  01-09-01  01.01.03  Modifed some of the new flags to have an MPI prefix
+ *  01-09-01  01.01.03  Modified some of the new flags to have an MPI prefix
  *                      and modified the FcPrimitiveSend flags.
  *  01-25-01  01.01.04  Move InitiatorIndex in LinkServiceRsp reply to a larger
  *                      field.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d496a99e03..0df065275cd 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -146,7 +146,6 @@ static MPT_EVHANDLER		 MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 static MPT_RESETHANDLER		 MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 static struct mpt_pci_driver 	*MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
 
-static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq);
 
 /*
  *  Driver Callback Index's
@@ -159,7 +158,8 @@ static u8 last_drv_idx;
  *  Forward protos...
  */
 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
-static int	mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
+static int	mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+		MPT_FRAME_HDR *reply);
 static int	mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
 			u32 *req, int replyBytes, u16 *u16reply, int maxwait,
 			int sleepFlag);
@@ -190,9 +190,9 @@ static int	mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
 static int	mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
 static void 	mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
 static void 	mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
-static void	mpt_timer_expired(unsigned long data);
 static void	mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
-static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
+static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
+	int sleepFlag);
 static int	SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
 static int	mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
 static int	mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
@@ -207,8 +207,8 @@ static int	procmpt_iocinfo_read(char *buf, char **start, off_t offset,
 #endif
 static void	mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
 
-//int		mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
-static int	ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
+static int	ProcessEventNotification(MPT_ADAPTER *ioc,
+		EventNotificationReply_t *evReply, int *evHandlers);
 static void	mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
 static void	mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 static void	mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
@@ -277,6 +277,56 @@ mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
 }
 
 /**
+ * mpt_is_discovery_complete - determine if discovery has completed
+ * @ioc: per adatper instance
+ *
+ * Returns 1 when discovery completed, else zero.
+ */
+static int
+mpt_is_discovery_complete(MPT_ADAPTER *ioc)
+{
+	ConfigExtendedPageHeader_t hdr;
+	CONFIGPARMS cfg;
+	SasIOUnitPage0_t *buffer;
+	dma_addr_t dma_handle;
+	int rc = 0;
+
+	memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
+	memset(&cfg, 0, sizeof(CONFIGPARMS));
+	hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+	hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	cfg.cfghdr.ehdr = &hdr;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if ((mpt_config(ioc, &cfg)))
+		goto out;
+	if (!hdr.ExtPageLength)
+		goto out;
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+	    &dma_handle);
+	if (!buffer)
+		goto out;
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+	if ((mpt_config(ioc, &cfg)))
+		goto out_free_consistent;
+
+	if (!(buffer->PhyData[0].PortFlags &
+	    MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
+		rc = 1;
+
+ out_free_consistent:
+	pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+	    buffer, dma_handle);
+ out:
+	return rc;
+}
+
+/**
  *	mpt_fault_reset_work - work performed on workq after ioc fault
  *	@work: input argument, used to derive ioc
  *
@@ -290,7 +340,7 @@ mpt_fault_reset_work(struct work_struct *work)
 	int		 rc;
 	unsigned long	 flags;
 
-	if (ioc->diagPending || !ioc->active)
+	if (ioc->ioc_reset_in_progress || !ioc->active)
 		goto out;
 
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
@@ -307,6 +357,12 @@ mpt_fault_reset_work(struct work_struct *work)
 			printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
 			    "reset (%04xh)\n", ioc->name, ioc_raw_state &
 			    MPI_DOORBELL_DATA_MASK);
+	} else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
+		if ((mpt_is_discovery_complete(ioc))) {
+			devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
+			    "discovery_quiesce_io flag\n", ioc->name));
+			ioc->sas_discovery_quiesce_io = 0;
+		}
 	}
 
  out:
@@ -317,11 +373,11 @@ mpt_fault_reset_work(struct work_struct *work)
 		ioc = ioc->alt_ioc;
 
 	/* rearm the timer */
-	spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	if (ioc->reset_work_q)
 		queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
 			msecs_to_jiffies(MPT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 }
 
 
@@ -501,9 +557,9 @@ mpt_interrupt(int irq, void *bus_id)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mpt_base_reply - MPT base driver's callback routine
+ *	mptbase_reply - MPT base driver's callback routine
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@mf: Pointer to original MPT request frame
+ *	@req: Pointer to original MPT request frame
  *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
  *
  *	MPT base driver's callback routine; all base driver
@@ -514,122 +570,49 @@ mpt_interrupt(int irq, void *bus_id)
  *	should be freed, or 0 if it shouldn't.
  */
 static int
-mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
+mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 {
+	EventNotificationReply_t *pEventReply;
+	u8 event;
+	int evHandlers;
 	int freereq = 1;
-	u8 func;
 
-	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply() called\n", ioc->name));
-#ifdef CONFIG_FUSION_LOGGING
-	if ((ioc->debug_level & MPT_DEBUG_MSG_FRAME) &&
-			!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
-		dmfprintk(ioc, printk(MYIOC_s_INFO_FMT ": Original request frame (@%p) header\n",
-		    ioc->name, mf));
-		DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)mf);
-	}
-#endif
-
-	func = reply->u.hdr.Function;
-	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, Function=%02Xh\n",
-			ioc->name, func));
-
-	if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
-		EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply;
-		int evHandlers = 0;
-		int results;
-
-		results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
-		if (results != evHandlers) {
-			/* CHECKME! Any special handling needed here? */
-			devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
-					ioc->name, evHandlers, results));
-		}
-
-		/*
-		 *	Hmmm...  It seems that EventNotificationReply is an exception
-		 *	to the rule of one reply per request.
-		 */
-		if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
+	switch (reply->u.hdr.Function) {
+	case MPI_FUNCTION_EVENT_NOTIFICATION:
+		pEventReply = (EventNotificationReply_t *)reply;
+		evHandlers = 0;
+		ProcessEventNotification(ioc, pEventReply, &evHandlers);
+		event = le32_to_cpu(pEventReply->Event) & 0xFF;
+		if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
 			freereq = 0;
-		} else {
-			devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
-				ioc->name, pEvReply));
-		}
-
-#ifdef CONFIG_PROC_FS
-//		LogEvent(ioc, pEvReply);
-#endif
-
-	} else if (func == MPI_FUNCTION_EVENT_ACK) {
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, EventAck reply received\n",
-				ioc->name));
-	} else if (func == MPI_FUNCTION_CONFIG) {
-		CONFIGPARMS *pCfg;
-		unsigned long flags;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "config_complete (mf=%p,mr=%p)\n",
-				ioc->name, mf, reply));
-
-		pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *)));
-
-		if (pCfg) {
-			/* disable timer and remove from linked list */
-			del_timer(&pCfg->timer);
-
-			spin_lock_irqsave(&ioc->FreeQlock, flags);
-			list_del(&pCfg->linkage);
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-			/*
-			 *	If IOC Status is SUCCESS, save the header
-			 *	and set the status code to GOOD.
-			 */
-			pCfg->status = MPT_CONFIG_ERROR;
-			if (reply) {
-				ConfigReply_t	*pReply = (ConfigReply_t *)reply;
-				u16		 status;
-
-				status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-				dcprintk(ioc, printk(MYIOC_s_NOTE_FMT "  IOCStatus=%04xh, IOCLogInfo=%08xh\n",
-				     ioc->name, status, le32_to_cpu(pReply->IOCLogInfo)));
-
-				pCfg->status = status;
-				if (status == MPI_IOCSTATUS_SUCCESS) {
-					if ((pReply->Header.PageType &
-					    MPI_CONFIG_PAGETYPE_MASK) ==
-					    MPI_CONFIG_PAGETYPE_EXTENDED) {
-						pCfg->cfghdr.ehdr->ExtPageLength =
-						    le16_to_cpu(pReply->ExtPageLength);
-						pCfg->cfghdr.ehdr->ExtPageType =
-						    pReply->ExtPageType;
-					}
-					pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
-
-					/* If this is a regular header, save PageLength. */
-					/* LMP Do this better so not using a reserved field! */
-					pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
-					pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
-					pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
-				}
-			}
-
-			/*
-			 *	Wake up the original calling thread
-			 */
-			pCfg->wait_done = 1;
-			wake_up(&mpt_waitq);
+		if (event != MPI_EVENT_EVENT_CHANGE)
+			break;
+	case MPI_FUNCTION_CONFIG:
+	case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
+		ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+		if (reply) {
+			ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+			memcpy(ioc->mptbase_cmds.reply, reply,
+			    min(MPT_DEFAULT_FRAME_SIZE,
+				4 * reply->u.reply.MsgLength));
 		}
-	} else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
-		/* we should be always getting a reply frame */
-		memcpy(ioc->persist_reply_frame, reply,
-		    min(MPT_DEFAULT_FRAME_SIZE,
-		    4*reply->u.reply.MsgLength));
-		del_timer(&ioc->persist_timer);
-		ioc->persist_wait_done = 1;
-		wake_up(&mpt_waitq);
-	} else {
-		printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
-				ioc->name, func);
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+			complete(&ioc->mptbase_cmds.done);
+		} else
+			freereq = 0;
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
+			freereq = 1;
+		break;
+	case MPI_FUNCTION_EVENT_ACK:
+		devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "EventAck reply received\n", ioc->name));
+		break;
+	default:
+		printk(MYIOC_s_ERR_FMT
+		    "Unexpected msg function (=%02Xh) reply received!\n",
+		    ioc->name, reply->u.hdr.Function);
+		break;
 	}
 
 	/*
@@ -988,17 +971,21 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 
 	/*  Put Request back on FreeQ!  */
 	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
+	if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
+		goto out;
+	/* signature to know if this mf is freed */
+	mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
 	list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
 #ifdef MFCNT
 	ioc->mfcnt--;
 #endif
+ out:
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mpt_add_sge - Place a simple SGE at address pAddr.
+ *	mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
  *	@pAddr: virtual address for SGE
  *	@flagslength: SGE flags and data transfer length
  *	@dma_addr: Physical address
@@ -1006,23 +993,116 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
  *	This routine places a MPT request frame back on the MPT adapter's
  *	FreeQ.
  */
-void
-mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
+static void
+mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 {
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
+	pSge->FlagsLength = cpu_to_le32(flagslength);
+	pSge->Address = cpu_to_le32(dma_addr);
+}
+
+/**
+ *	mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@flagslength: SGE flags and data transfer length
+ *	@dma_addr: Physical address
+ *
+ *	This routine places a MPT request frame back on the MPT adapter's
+ *	FreeQ.
+ **/
+static void
+mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	pSge->Address.Low = cpu_to_le32
+			(lower_32_bits((unsigned long)(dma_addr)));
+	pSge->Address.High = cpu_to_le32
+			(upper_32_bits((unsigned long)dma_addr));
+	pSge->FlagsLength = cpu_to_le32
+			((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/**
+ *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
+ *	@pAddr: virtual address for SGE
+ *	@flagslength: SGE flags and data transfer length
+ *	@dma_addr: Physical address
+ *
+ *	This routine places a MPT request frame back on the MPT adapter's
+ *	FreeQ.
+ **/
+static void
+mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+	u32 tmp;
+
+	pSge->Address.Low = cpu_to_le32
+			(lower_32_bits((unsigned long)(dma_addr)));
+	tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+
+	/*
+	 * 1078 errata workaround for the 36GB limitation
+	 */
+	if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32)  == 9) {
+		flagslength |=
+		    MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
+		tmp |= (1<<31);
+		if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
+			printk(KERN_DEBUG "1078 P0M2 addressing for "
+			    "addr = 0x%llx len = %d\n",
+			    (unsigned long long)dma_addr,
+			    MPI_SGE_LENGTH(flagslength));
+	}
+
+	pSge->Address.High = cpu_to_le32(tmp);
+	pSge->FlagsLength = cpu_to_le32(
+		(flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@next: nextChainOffset value (u32's)
+ *	@length: length of next SGL segment
+ *	@dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
+		pChain->Length = cpu_to_le16(length);
+		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
+		pChain->NextChainOffset = next;
+		pChain->Address = cpu_to_le32(dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
+ *	@pAddr: virtual address for SGE
+ *	@next: nextChainOffset value (u32's)
+ *	@length: length of next SGL segment
+ *	@dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
 		u32 tmp = dma_addr & 0xFFFFFFFF;
 
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
+		pChain->Length = cpu_to_le16(length);
+		pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
+				 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
 
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
+		pChain->NextChainOffset = next;
+
+		pChain->Address.Low = cpu_to_le32(tmp);
+		tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+		pChain->Address.High = cpu_to_le32(tmp);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1225,7 +1305,7 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
 	}
 	flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
 	flags_length |= ioc->HostPageBuffer_sz;
-	mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+	ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
 	ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
 
 return 0;
@@ -1534,21 +1614,42 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 
 	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
-		    ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
-		    ioc->name));
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
-		    ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
-		    ioc->name));
+	if (sizeof(dma_addr_t) > 4) {
+		const uint64_t required_mask = dma_get_required_mask
+		    (&pdev->dev);
+		if (required_mask > DMA_BIT_MASK(32)
+			&& !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+			&& !pci_set_consistent_dma_mask(pdev,
+						 DMA_BIT_MASK(64))) {
+			ioc->dma_mask = DMA_BIT_MASK(64);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+			&& !pci_set_consistent_dma_mask(pdev,
+						DMA_BIT_MASK(32))) {
+			ioc->dma_mask = DMA_BIT_MASK(32);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else {
+			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+			    ioc->name, pci_name(pdev));
+			return r;
+		}
 	} else {
-		printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
-		    ioc->name, pci_name(pdev));
-		pci_release_selected_regions(pdev, ioc->bars);
-		return r;
+		if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+			&& !pci_set_consistent_dma_mask(pdev,
+						DMA_BIT_MASK(32))) {
+			ioc->dma_mask = DMA_BIT_MASK(32);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+				": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+				ioc->name));
+		} else {
+			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+			    ioc->name, pci_name(pdev));
+			return r;
+		}
 	}
 
 	mem_phys = msize = 0;
@@ -1632,6 +1733,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ioc->id = mpt_ids++;
 	sprintf(ioc->name, "ioc%d", ioc->id);
+	dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
 
 	/*
 	 * set initial debug level
@@ -1650,14 +1752,36 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		return r;
 	}
 
+	/*
+	 * Setting up proper handlers for scatter gather handling
+	 */
+	if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+		if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+			ioc->add_sge = &mpt_add_sge_64bit_1078;
+		else
+			ioc->add_sge = &mpt_add_sge_64bit;
+		ioc->add_chain = &mpt_add_chain_64bit;
+		ioc->sg_addr_size = 8;
+	} else {
+		ioc->add_sge = &mpt_add_sge;
+		ioc->add_chain = &mpt_add_chain;
+		ioc->sg_addr_size = 4;
+	}
+	ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
 	ioc->alloc_total = sizeof(MPT_ADAPTER);
 	ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;		/* avoid div by zero! */
 	ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
 
 	ioc->pcidev = pdev;
-	ioc->diagPending = 0;
-	spin_lock_init(&ioc->diagLock);
-	spin_lock_init(&ioc->initializing_hba_lock);
+
+	spin_lock_init(&ioc->taskmgmt_lock);
+	mutex_init(&ioc->internal_cmds.mutex);
+	init_completion(&ioc->internal_cmds.done);
+	mutex_init(&ioc->mptbase_cmds.mutex);
+	init_completion(&ioc->mptbase_cmds.done);
+	mutex_init(&ioc->taskmgmt_cmds.mutex);
+	init_completion(&ioc->taskmgmt_cmds.done);
 
 	/* Initialize the event logging.
 	 */
@@ -1670,16 +1794,13 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->mfcnt = 0;
 #endif
 
+	ioc->sh = NULL;
 	ioc->cached_fw = NULL;
 
 	/* Initilize SCSI Config Data structure
 	 */
 	memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
 
-	/* Initialize the running configQ head.
-	 */
-	INIT_LIST_HEAD(&ioc->configQ);
-
 	/* Initialize the fc rport list head.
 	 */
 	INIT_LIST_HEAD(&ioc->fc_rports);
@@ -1690,9 +1811,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Initialize workqueue */
 	INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
-	spin_lock_init(&ioc->fault_reset_work_lock);
 
-	snprintf(ioc->reset_work_q_name, sizeof(ioc->reset_work_q_name),
+	snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
 		 "mpt_poll_%d", ioc->id);
 	ioc->reset_work_q =
 		create_singlethread_workqueue(ioc->reset_work_q_name);
@@ -1767,11 +1887,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	case MPI_MANUFACTPAGE_DEVID_SAS1064:
 	case MPI_MANUFACTPAGE_DEVID_SAS1068:
 		ioc->errata_flag_1064 = 1;
+		ioc->bus_type = SAS;
+		break;
 
 	case MPI_MANUFACTPAGE_DEVID_SAS1064E:
 	case MPI_MANUFACTPAGE_DEVID_SAS1068E:
 	case MPI_MANUFACTPAGE_DEVID_SAS1078:
 		ioc->bus_type = SAS;
+		break;
 	}
 
 
@@ -1813,6 +1936,11 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	 */
 	mpt_detect_bound_ports(ioc, pdev);
 
+	INIT_LIST_HEAD(&ioc->fw_event_list);
+	spin_lock_init(&ioc->fw_event_lock);
+	snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
+	ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+
 	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
 	    CAN_SLEEP)) != 0){
 		printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
@@ -1885,13 +2013,18 @@ mpt_detach(struct pci_dev *pdev)
 	/*
 	 * Stop polling ioc for fault condition
 	 */
-	spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
 	wq = ioc->reset_work_q;
 	ioc->reset_work_q = NULL;
-	spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 	cancel_delayed_work(&ioc->fault_reset_work);
 	destroy_workqueue(wq);
 
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->fw_event_q;
+	ioc->fw_event_q = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	destroy_workqueue(wq);
 
 	sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
 	remove_proc_entry(pname, NULL);
@@ -1994,6 +2127,21 @@ mpt_resume(struct pci_dev *pdev)
 	if (err)
 		return err;
 
+	if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+		if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+			ioc->add_sge = &mpt_add_sge_64bit_1078;
+		else
+			ioc->add_sge = &mpt_add_sge_64bit;
+		ioc->add_chain = &mpt_add_chain_64bit;
+		ioc->sg_addr_size = 8;
+	} else {
+
+		ioc->add_sge = &mpt_add_sge;
+		ioc->add_chain = &mpt_add_chain;
+		ioc->sg_addr_size = 4;
+	}
+	ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
 	printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
 	    ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
 	    CHIPREG_READ32(&ioc->chip->Doorbell));
@@ -2091,12 +2239,16 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	ioc->active = 0;
 
 	if (ioc->alt_ioc) {
-		if (ioc->alt_ioc->active)
+		if (ioc->alt_ioc->active ||
+		    reason == MPT_HOSTEVENT_IOC_RECOVER) {
 			reset_alt_ioc_active = 1;
-
-		/* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
-		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
-		ioc->alt_ioc->active = 0;
+			/* Disable alt-IOC's reply interrupts
+			 *  (and FreeQ) for a bit
+			 **/
+			CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+				0xFFFFFFFF);
+			ioc->alt_ioc->active = 0;
+		}
 	}
 
 	hard = 1;
@@ -2117,9 +2269,11 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			}
 
 		} else {
-			printk(MYIOC_s_WARN_FMT "NOT READY!\n", ioc->name);
+			printk(MYIOC_s_WARN_FMT
+			    "NOT READY WARNING!\n", ioc->name);
 		}
-		return -1;
+		ret = -1;
+		goto out;
 	}
 
 	/* hard_reset_done = 0 if a soft reset was performed
@@ -2129,7 +2283,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
 			alt_ioc_ready = 1;
 		else
-			printk(MYIOC_s_WARN_FMT "alt_ioc not ready!\n", ioc->alt_ioc->name);
+			printk(MYIOC_s_WARN_FMT
+			    ": alt-ioc Not ready WARNING!\n",
+			    ioc->alt_ioc->name);
 	}
 
 	for (ii=0; ii<5; ii++) {
@@ -2150,7 +2306,8 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	if (alt_ioc_ready) {
 		if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
 			dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			    "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
+			    "Initial Alt IocFacts failed rc=%x\n",
+			    ioc->name, rc));
 			/* Retry - alt IOC was initialized once
 			 */
 			rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
@@ -2194,16 +2351,20 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			    IRQF_SHARED, ioc->name, ioc);
 			if (rc < 0) {
 				printk(MYIOC_s_ERR_FMT "Unable to allocate "
-				    "interrupt %d!\n", ioc->name, ioc->pcidev->irq);
+				    "interrupt %d!\n",
+				    ioc->name, ioc->pcidev->irq);
 				if (ioc->msi_enable)
 					pci_disable_msi(ioc->pcidev);
-				return -EBUSY;
+				ret = -EBUSY;
+				goto out;
 			}
 			irq_allocated = 1;
 			ioc->pci_irq = ioc->pcidev->irq;
 			pci_set_master(ioc->pcidev);		/* ?? */
-			dprintk(ioc, printk(MYIOC_s_INFO_FMT "installed at interrupt "
-			    "%d\n", ioc->name, ioc->pcidev->irq));
+			pci_set_drvdata(ioc->pcidev, ioc);
+			dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+			    "installed at interrupt %d\n", ioc->name,
+			    ioc->pcidev->irq));
 		}
 	}
 
@@ -2212,17 +2373,22 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	 * init as upper addresses are needed for init.
 	 * If fails, continue with alt-ioc processing
 	 */
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
+	    ioc->name));
 	if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
 		ret = -3;
 
 	/* May need to check/upload firmware & data here!
 	 * If fails, continue with alt-ioc processing
 	 */
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
+	    ioc->name));
 	if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
 		ret = -4;
 // NEW!
 	if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
-		printk(MYIOC_s_WARN_FMT ": alt_ioc (%d) FIFO mgmt alloc!\n",
+		printk(MYIOC_s_WARN_FMT
+		    ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
 		    ioc->alt_ioc->name, rc);
 		alt_ioc_ready = 0;
 		reset_alt_ioc_active = 0;
@@ -2232,8 +2398,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
 			alt_ioc_ready = 0;
 			reset_alt_ioc_active = 0;
-			printk(MYIOC_s_WARN_FMT "alt_ioc (%d) init failure!\n",
-			    ioc->alt_ioc->name, rc);
+			printk(MYIOC_s_WARN_FMT
+				": alt-ioc: (%d) init failure WARNING!\n",
+					ioc->alt_ioc->name, rc);
 		}
 	}
 
@@ -2269,28 +2436,36 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		}
 	}
 
+	/*  Enable MPT base driver management of EventNotification
+	 *  and EventAck handling.
+	 */
+	if ((ret == 0) && (!ioc->facts.EventState)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+			"SendEventNotification\n",
+		    ioc->name));
+		ret = SendEventNotification(ioc, 1, sleepFlag);	/* 1=Enable */
+	}
+
+	if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
+		rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
+
 	if (ret == 0) {
 		/* Enable! (reply interrupt) */
 		CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
 		ioc->active = 1;
 	}
-
-	if (reset_alt_ioc_active && ioc->alt_ioc) {
-		/* (re)Enable alt-IOC! (reply interrupt) */
-		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "alt_ioc reply irq re-enabled\n",
-		    ioc->alt_ioc->name));
-		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
-		ioc->alt_ioc->active = 1;
+	if (rc == 0) {	/* alt ioc */
+		if (reset_alt_ioc_active && ioc->alt_ioc) {
+			/* (re)Enable alt-IOC! (reply interrupt) */
+			dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
+				"reply irq re-enabled\n",
+				ioc->alt_ioc->name));
+			CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+				MPI_HIM_DIM);
+			ioc->alt_ioc->active = 1;
+		}
 	}
 
-	/*  Enable MPT base driver management of EventNotification
-	 *  and EventAck handling.
-	 */
-	if ((ret == 0) && (!ioc->facts.EventState))
-		(void) SendEventNotification(ioc, 1);	/* 1=Enable EventNotification */
-
-	if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
-		(void) SendEventNotification(ioc->alt_ioc, 1);	/* 1=Enable EventNotification */
 
 	/*	Add additional "reason" check before call to GetLanConfigPages
 	 *	(combined with GetIoUnitPage2 call).  This prevents a somewhat
@@ -2306,8 +2481,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		mutex_init(&ioc->raid_data.inactive_list_mutex);
 		INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
 
-		if (ioc->bus_type == SAS) {
+		switch (ioc->bus_type) {
 
+		case SAS:
 			/* clear persistency table */
 			if(ioc->facts.IOCExceptions &
 			    MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
@@ -2321,8 +2497,15 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			 */
 			mpt_findImVolumes(ioc);
 
-		} else if (ioc->bus_type == FC) {
-			if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
+			/* Check, and possibly reset, the coalescing value
+			 */
+			mpt_read_ioc_pg_1(ioc);
+
+			break;
+
+		case FC:
+			if ((ioc->pfacts[0].ProtocolFlags &
+				MPI_PORTFACTS_PROTOCOL_LAN) &&
 			    (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
 				/*
 				 *  Pre-fetch the ports LAN MAC address!
@@ -2331,11 +2514,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 				(void) GetLanConfigPages(ioc);
 				a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
 				dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-				    "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
-				    ioc->name, a[5], a[4], a[3], a[2], a[1], a[0]));
-
+					"LanAddr = %02X:%02X:%02X"
+					":%02X:%02X:%02X\n",
+					ioc->name, a[5], a[4],
+					a[3], a[2], a[1], a[0]));
 			}
-		} else {
+			break;
+
+		case SPI:
 			/* Get NVRAM and adapter maximums from SPP 0 and 2
 			 */
 			mpt_GetScsiPortSettings(ioc, 0);
@@ -2354,6 +2540,8 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			mpt_read_ioc_pg_1(ioc);
 
 			mpt_read_ioc_pg_4(ioc);
+
+			break;
 		}
 
 		GetIoUnitPage2(ioc);
@@ -2435,16 +2623,20 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
 		if (_pcidev == peer) {
 			/* Paranoia checks */
 			if (ioc->alt_ioc != NULL) {
-				printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
-					ioc->name, ioc->alt_ioc->name);
+				printk(MYIOC_s_WARN_FMT
+				    "Oops, already bound (%s <==> %s)!\n",
+				    ioc->name, ioc->name, ioc->alt_ioc->name);
 				break;
 			} else if (ioc_srch->alt_ioc != NULL) {
-				printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
-					ioc_srch->name, ioc_srch->alt_ioc->name);
+				printk(MYIOC_s_WARN_FMT
+				    "Oops, already bound (%s <==> %s)!\n",
+				    ioc_srch->name, ioc_srch->name,
+				    ioc_srch->alt_ioc->name);
 				break;
 			}
-			dprintk(ioc, printk(MYIOC_s_INFO_FMT "FOUND! binding to %s\n",
-				ioc->name, ioc_srch->name));
+			dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				"FOUND! binding %s <==> %s\n",
+				ioc->name, ioc->name, ioc_srch->name));
 			ioc_srch->alt_ioc = ioc;
 			ioc->alt_ioc = ioc_srch;
 		}
@@ -2464,8 +2656,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 	int ret;
 
 	if (ioc->cached_fw != NULL) {
-		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
-		    "adapter\n", __func__, ioc->name));
+		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"%s: Pushing FW onto adapter\n", __func__, ioc->name));
 		if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
 		    ioc->cached_fw, CAN_SLEEP)) < 0) {
 			printk(MYIOC_s_WARN_FMT
@@ -2474,11 +2666,30 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 		}
 	}
 
+	/*
+	 * Put the controller into ready state (if its not already)
+	 */
+	if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
+		if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
+		    CAN_SLEEP)) {
+			if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
+				printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit "
+				    "reset failed to put ioc in ready state!\n",
+				    ioc->name, __func__);
+		} else
+			printk(MYIOC_s_ERR_FMT "%s:  IOC msg unit reset "
+			    "failed!\n", ioc->name, __func__);
+	}
+
+
 	/* Disable adapter interrupts! */
+	synchronize_irq(ioc->pcidev->irq);
 	CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
 	ioc->active = 0;
+
 	/* Clear any lingering interrupt */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+	CHIPREG_READ32(&ioc->chip->IntStatus);
 
 	if (ioc->alloc != NULL) {
 		sz = ioc->alloc_sz;
@@ -2538,19 +2749,22 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 		if((ret = mpt_host_page_access_control(ioc,
 		    MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
 			printk(MYIOC_s_ERR_FMT
-			   "host page buffers free failed (%d)!\n",
-			    ioc->name, ret);
+			   ": %s: host page buffers free failed (%d)!\n",
+			    ioc->name, __func__, ret);
 		}
-		dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "HostPageBuffer free  @ %p, sz=%d bytes\n",
-		 	ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+		dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"HostPageBuffer free  @ %p, sz=%d bytes\n",
+			ioc->name, ioc->HostPageBuffer,
+			ioc->HostPageBuffer_sz));
 		pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
 		    ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
 		ioc->HostPageBuffer = NULL;
 		ioc->HostPageBuffer_sz = 0;
 		ioc->alloc_total -= ioc->HostPageBuffer_sz;
 	}
-}
 
+	pci_set_drvdata(ioc->pcidev, NULL);
+}
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mpt_adapter_dispose - Free all resources associated with an MPT adapter
@@ -2690,8 +2904,12 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	}
 
 	/* Is it already READY? */
-	if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+	if (!statefault &&
+	    ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+		    "IOC is in READY state\n", ioc->name));
 		return 0;
+	}
 
 	/*
 	 *	Check to see if IOC is in FAULT state.
@@ -2764,8 +2982,9 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 
 		ii++; cntdn--;
 		if (!cntdn) {
-			printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
-					ioc->name, (int)((ii+5)/HZ));
+			printk(MYIOC_s_ERR_FMT
+				"Wait IOC_READY state (0x%x) timeout(%d)!\n",
+				ioc->name, ioc_state, (int)((ii+5)/HZ));
 			return -ETIME;
 		}
 
@@ -2778,9 +2997,8 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	}
 
 	if (statefault < 3) {
-		printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
-				ioc->name,
-				statefault==1 ? "stuck handshake" : "IOC FAULT");
+		printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
+			statefault == 1 ? "stuck handshake" : "IOC FAULT");
 	}
 
 	return hard_reset_done;
@@ -2833,8 +3051,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 
 	/* IOC *must* NOT be in RESET state! */
 	if (ioc->last_state == MPI_IOC_STATE_RESET) {
-		printk(MYIOC_s_ERR_FMT "Can't get IOCFacts NOT READY! (%08x)\n",
-		    ioc->name, ioc->last_state );
+		printk(KERN_ERR MYNAM
+		    ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+		    ioc->name, ioc->last_state);
 		return -44;
 	}
 
@@ -2896,7 +3115,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		 *	Old: u16{Major(4),Minor(4),SubMinor(8)}
 		 *	New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
 		 */
-		if (facts->MsgVersion < 0x0102) {
+		if (facts->MsgVersion < MPI_VERSION_01_02) {
 			/*
 			 *	Handle old FC f/w style, convert to new...
 			 */
@@ -2908,9 +3127,11 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 			facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
 
 		facts->ProductID = le16_to_cpu(facts->ProductID);
+
 		if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
 		    > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
 			ioc->ir_firmware = 1;
+
 		facts->CurrentHostMfaHighAddr =
 				le32_to_cpu(facts->CurrentHostMfaHighAddr);
 		facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -2926,7 +3147,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		 * to 14 in MPI-1.01.0x.
 		 */
 		if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
-		    facts->MsgVersion > 0x0100) {
+		    facts->MsgVersion > MPI_VERSION_01_00) {
 			facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
 		}
 
@@ -3108,6 +3329,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
 
 	ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
 	ioc_init.MaxBuses = (U8)ioc->number_of_buses;
+
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
 		   ioc->name, ioc->facts.MsgVersion));
 	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -3122,7 +3344,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
 	}
 	ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz);	/* in BYTES */
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		/* Save the upper 32-bits of the request
 		 * (reply) and sense buffers.
 		 */
@@ -3325,11 +3547,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
 	FWUpload_t		*prequest;
 	FWUploadReply_t		*preply;
 	FWUploadTCSGE_t		*ptcsge;
-	int			 sgeoffset;
 	u32			 flagsLength;
 	int			 ii, sz, reply_sz;
 	int			 cmdStatus;
-
+	int			request_size;
 	/* If the image size is 0, we are done.
 	 */
 	if ((sz = ioc->facts.FWImageSize) == 0)
@@ -3364,42 +3585,41 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
 	ptcsge->ImageSize = cpu_to_le32(sz);
 	ptcsge++;
 
-	sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t);
-
 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
-	mpt_add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
-
-	sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
-	    ioc->name, prequest, sgeoffset));
+	ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
+	request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
+	    ioc->SGE_size;
+	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
+	    " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
+	    ioc->facts.FWImageSize, request_size));
 	DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
 
-	ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
-				reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
+	ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
+	    reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
 
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Upload completed rc=%x \n", ioc->name, ii));
+	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
+	    "rc=%x \n", ioc->name, ii));
 
 	cmdStatus = -EFAULT;
 	if (ii == 0) {
 		/* Handshake transfer was complete and successful.
 		 * Check the Reply Frame.
 		 */
-		int status, transfer_sz;
-		status = le16_to_cpu(preply->IOCStatus);
-		if (status == MPI_IOCSTATUS_SUCCESS) {
-			transfer_sz = le32_to_cpu(preply->ActualImageSize);
-			if (transfer_sz == sz)
+		int status;
+		status = le16_to_cpu(preply->IOCStatus) &
+				MPI_IOCSTATUS_MASK;
+		if (status == MPI_IOCSTATUS_SUCCESS &&
+		    ioc->facts.FWImageSize ==
+		    le32_to_cpu(preply->ActualImageSize))
 				cmdStatus = 0;
-		}
 	}
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
 			ioc->name, cmdStatus));
 
 
 	if (cmdStatus) {
-
-		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": fw upload failed, freeing image \n",
-			ioc->name));
+		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
+		    "freeing image \n", ioc->name));
 		mpt_free_fw_memory(ioc);
 	}
 	kfree(prequest);
@@ -3723,6 +3943,10 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
 
 	if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+
+		if (!ignore)
+			return 0;
+
 		drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
 			"address=%p\n",  ioc->name, __func__,
 			&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
@@ -3740,6 +3964,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				"looking for READY STATE: doorbell=%x"
 			        " count=%d\n",
 				ioc->name, doorbell, count));
+
 			if (doorbell == MPI_IOC_STATE_READY) {
 				return 1;
 			}
@@ -3890,6 +4115,10 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
 				doorbell &= MPI_IOC_STATE_MASK;
 
+				drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				    "looking for READY STATE: doorbell=%x"
+				    " count=%d\n", ioc->name, doorbell, count));
+
 				if (doorbell == MPI_IOC_STATE_READY) {
 					break;
 				}
@@ -3901,6 +4130,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 					mdelay (1000);
 				}
 			}
+
+			if (doorbell != MPI_IOC_STATE_READY)
+				printk(MYIOC_s_ERR_FMT "Failed to come READY "
+				    "after reset! IocState=%x", ioc->name,
+				    doorbell);
 		}
 	}
 
@@ -4019,8 +4253,9 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
 			if (sleepFlag != CAN_SLEEP)
 				count *= 10;
 
-			printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
-			    ioc->name, (int)((count+5)/HZ));
+			printk(MYIOC_s_ERR_FMT
+			    "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+			    ioc->name, state, (int)((count+5)/HZ));
 			return -ETIME;
 		}
 
@@ -4090,24 +4325,29 @@ initChainBuffers(MPT_ADAPTER *ioc)
 	 * num_sge = num sge in request frame + last chain buffer
 	 * scale = num sge per chain buffer if no chain element
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64))
-		num_sge =  scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+	scale = ioc->req_sz / ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64))
+		num_sge =  scale + (ioc->req_sz - 60) / ioc->SGE_size;
 	else
-		num_sge =  1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+		num_sge =  1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
 
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
-			(ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+			(ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
-		numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
-			(ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+		numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
+		    scale + (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 	dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
 		ioc->name, num_sge, numSGE));
 
-	if ( numSGE > MPT_SCSI_SG_DEPTH	)
-		numSGE = MPT_SCSI_SG_DEPTH;
+	if (ioc->bus_type == FC) {
+		if (numSGE > MPT_SCSI_FC_SG_DEPTH)
+			numSGE = MPT_SCSI_FC_SG_DEPTH;
+	} else {
+		if (numSGE > MPT_SCSI_SG_DEPTH)
+			numSGE = MPT_SCSI_SG_DEPTH;
+	}
 
 	num_chain = 1;
 	while (numSGE - num_sge > 0) {
@@ -4161,12 +4401,42 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 	dma_addr_t alloc_dma;
 	u8 *mem;
 	int i, reply_sz, sz, total_size, num_chain;
+	u64	dma_mask;
+
+	dma_mask = 0;
 
 	/*  Prime reply FIFO...  */
 
 	if (ioc->reply_frames == NULL) {
 		if ( (num_chain = initChainBuffers(ioc)) < 0)
 			return -1;
+		/*
+		 * 1078 errata workaround for the 36GB limitation
+		 */
+		if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
+		    ioc->dma_mask > DMA_35BIT_MASK) {
+			if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
+			    && !pci_set_consistent_dma_mask(ioc->pcidev,
+			    DMA_BIT_MASK(32))) {
+				dma_mask = DMA_35BIT_MASK;
+				d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				    "setting 35 bit addressing for "
+				    "Request/Reply/Chain and Sense Buffers\n",
+				    ioc->name));
+			} else {
+				/*Reseting DMA mask to 64 bit*/
+				pci_set_dma_mask(ioc->pcidev,
+					DMA_BIT_MASK(64));
+				pci_set_consistent_dma_mask(ioc->pcidev,
+					DMA_BIT_MASK(64));
+
+				printk(MYIOC_s_ERR_FMT
+				    "failed setting 35 bit addressing for "
+				    "Request/Reply/Chain and Sense Buffers\n",
+				    ioc->name);
+				return -1;
+			}
+		}
 
 		total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
 		dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
@@ -4305,9 +4575,16 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		alloc_dma += ioc->reply_sz;
 	}
 
+	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	    ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
+	    ioc->dma_mask))
+		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "restoring 64 bit addressing\n", ioc->name));
+
 	return 0;
 
 out_fail:
+
 	if (ioc->alloc != NULL) {
 		sz = ioc->alloc_sz;
 		pci_free_consistent(ioc->pcidev,
@@ -4324,6 +4601,13 @@ out_fail:
 				ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
 		ioc->sense_buf_pool = NULL;
 	}
+
+	if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+	    DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
+	    DMA_BIT_MASK(64)))
+		d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "restoring 64 bit addressing\n", ioc->name));
+
 	return -1;
 }
 
@@ -4759,7 +5043,14 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 	SasIoUnitControlReply_t		*sasIoUnitCntrReply;
 	MPT_FRAME_HDR			*mf = NULL;
 	MPIHeader_t			*mpi_hdr;
+	int				ret = 0;
+	unsigned long 	 		timeleft;
+
+	mutex_lock(&ioc->mptbase_cmds.mutex);
 
+	/* init the internal cmd struct */
+	memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+	INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
 
 	/* insure garbage is not sent to fw */
 	switch(persist_opcode) {
@@ -4769,17 +5060,19 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 		break;
 
 	default:
-		return -1;
-		break;
+		ret = -1;
+		goto out;
 	}
 
-	printk("%s: persist_opcode=%x\n",__func__, persist_opcode);
+	printk(KERN_DEBUG  "%s: persist_opcode=%x\n",
+		__func__, persist_opcode);
 
 	/* Get a MF for this command.
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		printk("%s: no msg frames!\n",__func__);
-		return -1;
+		printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
+		ret = -1;
+		goto out;
         }
 
 	mpi_hdr = (MPIHeader_t *) mf;
@@ -4789,27 +5082,42 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 	sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
 	sasIoUnitCntrReq->Operation = persist_opcode;
 
-	init_timer(&ioc->persist_timer);
-	ioc->persist_timer.data = (unsigned long) ioc;
-	ioc->persist_timer.function = mpt_timer_expired;
-	ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */;
-	ioc->persist_wait_done=0;
-	add_timer(&ioc->persist_timer);
 	mpt_put_msg_frame(mpt_base_index, ioc, mf);
-	wait_event(mpt_waitq, ioc->persist_wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		printk(KERN_DEBUG "%s: failed\n", __func__);
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft) {
+			printk(KERN_DEBUG "%s: Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
+	}
+
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		ret = -1;
+		goto out;
+	}
 
 	sasIoUnitCntrReply =
-	    (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
+	    (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
 	if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
-		printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    __func__,
-		    sasIoUnitCntrReply->IOCStatus,
+		printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+		    __func__, sasIoUnitCntrReply->IOCStatus,
 		    sasIoUnitCntrReply->IOCLogInfo);
-		return -1;
-	}
+		printk(KERN_DEBUG "%s: failed\n", __func__);
+		ret = -1;
+	} else
+		printk(KERN_DEBUG "%s: success\n", __func__);
+ out:
 
-	printk("%s: success\n",__func__);
-	return 0;
+	CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+	mutex_unlock(&ioc->mptbase_cmds.mutex);
+	return ret;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5394,17 +5702,20 @@ mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
  *	-ENOMEM if pci_alloc failed
  **/
 int
-mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
+			RaidPhysDiskPage0_t *phys_disk)
 {
-	CONFIGPARMS		 	cfg;
-	ConfigPageHeader_t	 	hdr;
+	CONFIGPARMS			cfg;
+	ConfigPageHeader_t		hdr;
 	dma_addr_t			dma_handle;
 	pRaidPhysDiskPage0_t		buffer = NULL;
 	int				rc;
 
 	memset(&cfg, 0 , sizeof(CONFIGPARMS));
 	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
 
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
 	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
@@ -5451,6 +5762,161 @@ mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t
 }
 
 /**
+ *	mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
+ *	@ioc: Pointer to a Adapter Structure
+ *	@phys_disk_num: io unit unique phys disk num generated by the ioc
+ *
+ *	Return:
+ *	returns number paths
+ **/
+int
+mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
+{
+	CONFIGPARMS		 	cfg;
+	ConfigPageHeader_t	 	hdr;
+	dma_addr_t			dma_handle;
+	pRaidPhysDiskPage1_t		buffer = NULL;
+	int				rc;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	hdr.PageNumber = 1;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.physAddr = -1;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = 0;
+		goto out;
+	}
+
+	if (!hdr.PageLength) {
+		rc = 0;
+		goto out;
+	}
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer) {
+		rc = 0;
+		goto out;
+	}
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+	cfg.pageAddr = phys_disk_num;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = 0;
+		goto out;
+	}
+
+	rc = buffer->NumPhysDiskPaths;
+ out:
+
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+
+	return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
+
+/**
+ *	mpt_raid_phys_disk_pg1 - returns phys disk page 1
+ *	@ioc: Pointer to a Adapter Structure
+ *	@phys_disk_num: io unit unique phys disk num generated by the ioc
+ *	@phys_disk: requested payload data returned
+ *
+ *	Return:
+ *	0 on success
+ *	-EFAULT if read of config page header fails or data pointer not NULL
+ *	-ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+		RaidPhysDiskPage1_t *phys_disk)
+{
+	CONFIGPARMS		 	cfg;
+	ConfigPageHeader_t	 	hdr;
+	dma_addr_t			dma_handle;
+	pRaidPhysDiskPage1_t		buffer = NULL;
+	int				rc;
+	int				i;
+	__le64				sas_address;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	rc = 0;
+
+	hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	hdr.PageNumber = 1;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.physAddr = -1;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (!hdr.PageLength) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+	cfg.pageAddr = phys_disk_num;
+
+	if (mpt_config(ioc, &cfg) != 0) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
+	phys_disk->PhysDiskNum = phys_disk_num;
+	for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
+		phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
+		phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
+		phys_disk->Path[i].OwnerIdentifier =
+				buffer->Path[i].OwnerIdentifier;
+		phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
+		memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
+		sas_address = le64_to_cpu(sas_address);
+		memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
+		memcpy(&sas_address,
+				&buffer->Path[i].OwnerWWID, sizeof(__le64));
+		sas_address = le64_to_cpu(sas_address);
+		memcpy(&phys_disk->Path[i].OwnerWWID,
+				&sas_address, sizeof(__le64));
+	}
+
+ out:
+
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+
+	return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
+
+
+/**
  *	mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
  *	@ioc: Pointer to a Adapter Strucutre
  *
@@ -5775,30 +6241,28 @@ mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
  *	SendEventNotification - Send EventNotification (on or off) request to adapter
  *	@ioc: Pointer to MPT_ADAPTER structure
  *	@EvSwitch: Event switch flags
+ *	@sleepFlag: Specifies whether the process can sleep
  */
 static int
-SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
+SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
 {
-	EventNotification_t	*evnp;
+	EventNotification_t	evn;
+	MPIDefaultReply_t	reply_buf;
 
-	evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
-	if (evnp == NULL) {
-		devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
-				ioc->name));
-		return 0;
-	}
-	memset(evnp, 0, sizeof(*evnp));
-
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
+	memset(&evn, 0, sizeof(EventNotification_t));
+	memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
 
-	evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
-	evnp->ChainOffset = 0;
-	evnp->MsgFlags = 0;
-	evnp->Switch = EvSwitch;
+	evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
+	evn.Switch = EvSwitch;
+	evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
 
-	mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp);
+	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "Sending EventNotification (%d) request %p\n",
+	    ioc->name, EvSwitch, &evn));
 
-	return 0;
+	return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
+	    (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
+	    sleepFlag);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5814,7 +6278,7 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
 
 	if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__func__));
+		    ioc->name, __func__));
 		return -1;
 	}
 
@@ -5851,12 +6315,19 @@ int
 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 {
 	Config_t	*pReq;
+	ConfigReply_t	*pReply;
 	ConfigExtendedPageHeader_t  *pExtHdr = NULL;
 	MPT_FRAME_HDR	*mf;
-	unsigned long	 flags;
-	int		 ii, rc;
+	int		 ii;
 	int		 flagsLength;
-	int		 in_isr;
+	long		 timeout;
+	int		 ret;
+	u8		 page_type = 0, extend_page;
+	unsigned long 	 timeleft;
+	unsigned long	 flags;
+    int		 in_isr;
+	u8		 issue_hard_reset = 0;
+	u8		 retry_count = 0;
 
 	/*	Prevent calling wait_event() (below), if caller happens
 	 *	to be in ISR context, because that is fatal!
@@ -5866,15 +6337,43 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 		dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
 				ioc->name));
 		return -EPERM;
+    }
+
+	/* don't send a config page during diag reset */
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: busy with host reset\n", ioc->name, __func__));
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		return -EBUSY;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+	/* don't send if no chance of success */
+	if (!ioc->active ||
+	    mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: ioc not operational, %d, %xh\n",
+		    ioc->name, __func__, ioc->active,
+		    mpt_GetIocState(ioc, 0)));
+		return -EFAULT;
 	}
 
+ retry_config:
+	mutex_lock(&ioc->mptbase_cmds.mutex);
+	/* init the internal cmd struct */
+	memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+	INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
+
 	/* Get and Populate a free Frame
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		dcprintk(ioc, printk(MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n",
-				ioc->name));
-		return -EAGAIN;
+		dcprintk(ioc, printk(MYIOC_s_WARN_FMT
+		"mpt_config: no msg frames!\n", ioc->name));
+		ret = -EAGAIN;
+		goto out;
 	}
+
 	pReq = (Config_t *)mf;
 	pReq->Action = pCfg->action;
 	pReq->Reserved = 0;
@@ -5900,7 +6399,9 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 		pReq->ExtPageType = pExtHdr->ExtPageType;
 		pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 
-		/* Page Length must be treated as a reserved field for the extended header. */
+		/* Page Length must be treated as a reserved field for the
+		 * extended header.
+		 */
 		pReq->Header.PageLength = 0;
 	}
 
@@ -5913,78 +6414,91 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 	else
 		flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
 
-	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
+	    MPI_CONFIG_PAGETYPE_EXTENDED) {
 		flagsLength |= pExtHdr->ExtPageLength * 4;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
-			ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
-	}
-	else {
+		page_type = pReq->ExtPageType;
+		extend_page = 1;
+	} else {
 		flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
-
-		dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
-			ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+		page_type = pReq->Header.PageType;
+		extend_page = 0;
 	}
 
-	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
-
-	/* Append pCfg pointer to end of mf
-	 */
-	*((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) =  (void *) pCfg;
-
-	/* Initalize the timer
-	 */
-	init_timer_on_stack(&pCfg->timer);
-	pCfg->timer.data = (unsigned long) ioc;
-	pCfg->timer.function = mpt_timer_expired;
-	pCfg->wait_done = 0;
-
-	/* Set the timer; ensure 10 second minimum */
-	if (pCfg->timeout < 10)
-		pCfg->timer.expires = jiffies + HZ*10;
-	else
-		pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
-	/* Add to end of Q, set timer and then issue this command */
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	list_add_tail(&pCfg->linkage, &ioc->configQ);
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "Sending Config request type 0x%x, page 0x%x and action %d\n",
+	    ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
 
-	add_timer(&pCfg->timer);
+	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+	timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
 	mpt_put_msg_frame(mpt_base_index, ioc, mf);
-	wait_event(mpt_waitq, pCfg->wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
+		timeout);
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "Failed Sending Config request type 0x%x, page 0x%x,"
+		    " action %d, status %xh, time left %ld\n\n",
+			ioc->name, page_type, pReq->Header.PageNumber,
+			pReq->Action, ioc->mptbase_cmds.status, timeleft));
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft)
+			issue_hard_reset = 1;
+		goto out;
+	}
 
-	/* mf has been freed - do not access */
+	if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		ret = -1;
+		goto out;
+	}
+	pReply = (ConfigReply_t	*)ioc->mptbase_cmds.reply;
+	ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	if (ret == MPI_IOCSTATUS_SUCCESS) {
+		if (extend_page) {
+			pCfg->cfghdr.ehdr->ExtPageLength =
+			    le16_to_cpu(pReply->ExtPageLength);
+			pCfg->cfghdr.ehdr->ExtPageType =
+			    pReply->ExtPageType;
+		}
+		pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+		pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+		pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+		pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
 
-	rc = pCfg->status;
+	}
 
-	return rc;
-}
+	if (retry_count)
+		printk(MYIOC_s_INFO_FMT "Retry completed "
+		    "ret=0x%x timeleft=%ld\n",
+		    ioc->name, ret, timeleft);
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mpt_timer_expired - Callback for timer process.
- *	Used only internal config functionality.
- *	@data: Pointer to MPT_SCSI_HOST recast as an unsigned long
- */
-static void
-mpt_timer_expired(unsigned long data)
-{
-	MPT_ADAPTER *ioc = (MPT_ADAPTER *) data;
-
-	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired! \n", ioc->name));
+	dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
+	     ret, le32_to_cpu(pReply->IOCLogInfo)));
 
-	/* Perform a FW reload */
-	if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
-		printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
+out:
 
-	/* No more processing.
-	 * Hard reset clean-up will wake up
-	 * process and free all resources.
-	 */
-	dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired complete!\n", ioc->name));
+	CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+	mutex_unlock(&ioc->mptbase_cmds.mutex);
+	if (issue_hard_reset) {
+		issue_hard_reset = 0;
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+		    ioc->name, __func__);
+		mpt_HardResetHandler(ioc, CAN_SLEEP);
+		mpt_free_msg_frame(ioc, mf);
+		/* attempt one retry for a timed out command */
+		if (!retry_count) {
+			printk(MYIOC_s_INFO_FMT
+			    "Attempting Retry Config request"
+			    " type 0x%x, page 0x%x,"
+			    " action %d\n", ioc->name, page_type,
+			    pCfg->cfghdr.hdr->PageNumber, pCfg->action);
+			retry_count++;
+			goto retry_config;
+		}
+	}
+	return ret;
 
-	return;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5998,41 +6512,34 @@ mpt_timer_expired(unsigned long data)
 static int
 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	CONFIGPARMS *pCfg;
-	unsigned long flags;
-
-	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": IOC %s_reset routed to MPT base driver!\n",
-	    ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-	    reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	if (reset_phase == MPT_IOC_SETUP_RESET) {
-		;
-	} else if (reset_phase == MPT_IOC_PRE_RESET) {
-		/* If the internal config Q is not empty -
-		 * delete timer. MF resources will be freed when
-		 * the FIFO's are primed.
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		list_for_each_entry(pCfg, &ioc->configQ, linkage)
-			del_timer(&pCfg->timer);
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	} else {
-		CONFIGPARMS *pNext;
-
-		/* Search the configQ for internal commands.
-		 * Flush the Q, and wake up all suspended threads.
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) {
-			list_del(&pCfg->linkage);
-
-			pCfg->status = MPT_CONFIG_ERROR;
-			pCfg->wait_done = 1;
-			wake_up(&mpt_waitq);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		ioc->taskmgmt_quiesce_io = 1;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n",  ioc->name, __func__));
+/* wake up mptbase_cmds */
+		if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->mptbase_cmds.status |=
+			    MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->mptbase_cmds.done);
 		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+/* wake up taskmgmt_cmds */
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->taskmgmt_cmds.status |=
+				MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->taskmgmt_cmds.done);
+		}
+		break;
+	default:
+		break;
 	}
 
 	return 1;		/* currently means nothing really */
@@ -6344,6 +6851,59 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
 
 	*size = y;
 }
+/**
+ *	mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ *	Returns 0 for SUCCESS or -1 if FAILED.
+ *
+ *	If -1 is return, then it was not possible to set the flags
+ **/
+int
+mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+	int		 retval;
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
+	    (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
+		retval = -1;
+		goto out;
+	}
+	retval = 0;
+	ioc->taskmgmt_in_progress = 1;
+	ioc->taskmgmt_quiesce_io = 1;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->taskmgmt_in_progress = 1;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 1;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+	return retval;
+}
+EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
+
+/**
+ *	mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	ioc->taskmgmt_in_progress = 0;
+	ioc->taskmgmt_quiesce_io = 0;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->taskmgmt_in_progress = 0;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+}
+EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
 
 
 /**
@@ -6397,7 +6957,9 @@ int
 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 {
 	int		 rc;
+	u8	 cb_idx;
 	unsigned long	 flags;
+	unsigned long	 time_count;
 
 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
 #ifdef MFCNT
@@ -6410,14 +6972,15 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	/* Reset the adapter. Prevent more than 1 call to
 	 * mpt_do_ioc_recovery at any instant in time.
 	 */
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){
-		spin_unlock_irqrestore(&ioc->diagLock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 		return 0;
-	} else {
-		ioc->diagPending = 1;
 	}
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
+	ioc->ioc_reset_in_progress = 1;
+	if (ioc->alt_ioc)
+		ioc->alt_ioc->ioc_reset_in_progress = 1;
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
 	/* FIXME: If do_ioc_recovery fails, repeat....
 	 */
@@ -6427,47 +6990,57 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	 * Prevents timeouts occurring during a diagnostic reset...very bad.
 	 * For all other protocol drivers, this is a no-op.
 	 */
-	{
-		u8	 cb_idx;
-		int	 r = 0;
-
-		for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-			if (MptResetHandlers[cb_idx]) {
-				dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling IOC reset_setup handler #%d\n",
-						ioc->name, cb_idx));
-				r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
-				if (ioc->alt_ioc) {
-					dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling alt-%s setup reset handler #%d\n",
-							ioc->name, ioc->alt_ioc->name, cb_idx));
-					r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
-				}
-			}
+	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+		if (MptResetHandlers[cb_idx]) {
+			mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+			if (ioc->alt_ioc)
+				mpt_signal_reset(cb_idx, ioc->alt_ioc,
+					MPT_IOC_SETUP_RESET);
 		}
 	}
 
-	if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
-		printk(MYIOC_s_WARN_FMT "Cannot recover rc = %d!\n", ioc->name, rc);
+	time_count = jiffies;
+	rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
+	if (rc != 0) {
+		printk(KERN_WARNING MYNAM
+		    ": WARNING - (%d) Cannot recover %s\n", rc, ioc->name);
+	} else {
+		if (ioc->hard_resets < -1)
+			ioc->hard_resets++;
 	}
-	ioc->reload_fw = 0;
-	if (ioc->alt_ioc)
-		ioc->alt_ioc->reload_fw = 0;
 
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	ioc->diagPending = 0;
-	if (ioc->alt_ioc)
-		ioc->alt_ioc->diagPending = 0;
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	ioc->ioc_reset_in_progress = 0;
+	ioc->taskmgmt_quiesce_io = 0;
+	ioc->taskmgmt_in_progress = 0;
+	if (ioc->alt_ioc) {
+		ioc->alt_ioc->ioc_reset_in_progress = 0;
+		ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+		ioc->alt_ioc->taskmgmt_in_progress = 0;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
+	dtmprintk(ioc,
+	    printk(MYIOC_s_DEBUG_FMT
+		"HardResetHandler: completed (%d seconds): %s\n", ioc->name,
+		jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
+		"SUCCESS" : "FAILED")));
 
 	return rc;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#ifdef CONFIG_FUSION_LOGGING
 static void
-EventDescriptionStr(u8 event, u32 evData0, char *evStr)
+mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 {
 	char *ds = NULL;
+	u32 evData0;
+	int ii;
+	u8 event;
+	char *evStr = ioc->evStr;
+
+	event = le32_to_cpu(pEventReply->Event) & 0xFF;
+	evData0 = le32_to_cpu(pEventReply->Data[0]);
 
 	switch(event) {
 	case MPI_EVENT_NONE:
@@ -6501,9 +7074,9 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
 			ds = "Loop State(LIP) Change";
 		else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
-			ds = "Loop State(LPE) Change";		/* ??? */
+			ds = "Loop State(LPE) Change";
 		else
-			ds = "Loop State(LPB) Change";		/* ??? */
+			ds = "Loop State(LPB) Change";
 		break;
 	case MPI_EVENT_LOGOUT:
 		ds = "Logout";
@@ -6703,28 +7276,65 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	}
 	case MPI_EVENT_IR2:
 	{
+		u8 id = (u8)(evData0);
+		u8 channel = (u8)(evData0 >> 8);
+		u8 phys_num = (u8)(evData0 >> 24);
 		u8 ReasonCode = (u8)(evData0 >> 16);
+
 		switch (ReasonCode) {
 		case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
-			ds = "IR2: LD State Changed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: LD State Changed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
-			ds = "IR2: PD State Changed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD State Changed "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
-			ds = "IR2: Bad Block Table Full";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Bad Block Table Full: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_INSERTED:
-			ds = "IR2: PD Inserted";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD Inserted: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_PD_REMOVED:
-			ds = "IR2: PD Removed";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: PD Removed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
-			ds = "IR2: Foreign CFG Detected";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Foreign CFG Detected: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
-			ds = "IR2: Rebuild Medium Error";
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Rebuild Medium Error: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
+			break;
+		case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Dual Port Added: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
+			break;
+		case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "IR2: Dual Port Removed: "
+			    "id=%d channel=%d phys_num=%d",
+			    id, channel, phys_num);
 			break;
 		default:
 			ds = "IR2";
@@ -6760,13 +7370,18 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
 	{
 		u8 reason = (u8)(evData0);
-		u8 port_num = (u8)(evData0 >> 8);
-		u16 handle = le16_to_cpu(evData0 >> 16);
 
-		snprintf(evStr, EVENT_DESCR_STR_SZ,
-		    "SAS Initiator Device Status Change: reason=0x%02x "
-		    "port=%d handle=0x%04x",
-		    reason, port_num, handle);
+		switch (reason) {
+		case MPI_EVENT_SAS_INIT_RC_ADDED:
+			ds = "SAS Initiator Status Change: Added";
+			break;
+		case MPI_EVENT_SAS_INIT_RC_REMOVED:
+			ds = "SAS Initiator Status Change: Deleted";
+			break;
+		default:
+			ds = "SAS Initiator Status Change";
+			break;
+		}
 		break;
 	}
 
@@ -6814,6 +7429,24 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	}
 
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+	{
+		u8 reason = (u8)(evData0);
+
+		switch (reason) {
+		case MPI_EVENT_SAS_EXP_RC_ADDED:
+			ds = "Expander Status Change: Added";
+			break;
+		case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
+			ds = "Expander Status Change: Deleted";
+			break;
+		default:
+			ds = "Expander Status Change";
+			break;
+		}
+		break;
+	}
+
 	/*
 	 *  MPT base "custom" events may be added here...
 	 */
@@ -6823,8 +7456,20 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	}
 	if (ds)
 		strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
-}
 
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "MPT event:(%02Xh) : %s\n",
+	    ioc->name, event, evStr));
+
+	devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
+	    ": Event data:\n"));
+	for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
+		devtverboseprintk(ioc, printk(" %08x",
+		    le32_to_cpu(pEventReply->Data[ii])));
+	devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
+}
+#endif
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	ProcessEventNotification - Route EventNotificationReply to all event handlers
@@ -6841,37 +7486,24 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 {
 	u16 evDataLen;
 	u32 evData0 = 0;
-//	u32 evCtx;
 	int ii;
 	u8 cb_idx;
 	int r = 0;
 	int handlers = 0;
-	char evStr[EVENT_DESCR_STR_SZ];
 	u8 event;
 
 	/*
 	 *  Do platform normalization of values
 	 */
 	event = le32_to_cpu(pEventReply->Event) & 0xFF;
-//	evCtx = le32_to_cpu(pEventReply->EventContext);
 	evDataLen = le16_to_cpu(pEventReply->EventDataLength);
 	if (evDataLen) {
 		evData0 = le32_to_cpu(pEventReply->Data[0]);
 	}
 
-	EventDescriptionStr(event, evData0, evStr);
-	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event:(%02Xh) : %s\n",
-			ioc->name,
-			event,
-			evStr));
-
 #ifdef CONFIG_FUSION_LOGGING
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": Event data:\n", ioc->name));
-	for (ii = 0; ii < evDataLen; ii++)
-		devtverboseprintk(ioc, printk(" %08x",
-		    le32_to_cpu(pEventReply->Data[ii])));
-	devtverboseprintk(ioc, printk("\n"));
+	if (evDataLen)
+		mpt_display_event_info(ioc, pEventReply);
 #endif
 
 	/*
@@ -6926,8 +7558,9 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	 */
 	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
 		if (MptEvHandlers[cb_idx]) {
-			devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Routing Event to event handler #%d\n",
-					ioc->name, cb_idx));
+			devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			    "Routing Event to event handler #%d\n",
+			    ioc->name, cb_idx));
 			r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
 			handlers++;
 		}
@@ -7011,8 +7644,6 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 	switch (info) {
 	case 0x00010000:
 		desc = "bug! MID not found";
-		if (ioc->reload_fw == 0)
-			ioc->reload_fw++;
 		break;
 
 	case 0x00020000:
@@ -7613,7 +8244,6 @@ EXPORT_SYMBOL(mpt_get_msg_frame);
 EXPORT_SYMBOL(mpt_put_msg_frame);
 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
 EXPORT_SYMBOL(mpt_free_msg_frame);
-EXPORT_SYMBOL(mpt_add_sge);
 EXPORT_SYMBOL(mpt_send_handshake_request);
 EXPORT_SYMBOL(mpt_verify_adapter);
 EXPORT_SYMBOL(mpt_GetIocState);
@@ -7650,7 +8280,7 @@ fusion_init(void)
 	/*  Register ourselves (mptbase) in order to facilitate
 	 *  EventNotification handling.
 	 */
-	mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER);
+	mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER);
 
 	/* Register for hard reset handling callbacks.
 	 */
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index b3e981d2a50..1c8514dc31c 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.07"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.07"
+#define MPT_LINUX_VERSION_COMMON	"3.04.10"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.09"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -104,6 +104,7 @@
 #endif
 
 #define MPT_NAME_LENGTH			32
+#define MPT_KOBJ_NAME_LEN		20
 
 #define MPT_PROCFS_MPTBASEDIR		"mpt"
 						/* chg it to "driver/fusion" ? */
@@ -134,6 +135,7 @@
 
 #define MPT_COALESCING_TIMEOUT		0x10
 
+
 /*
  * SCSI transfer rate defines.
  */
@@ -161,10 +163,10 @@
 /*
  * Set the MAX_SGE value based on user input.
  */
-#ifdef  CONFIG_FUSION_MAX_SGE
-#if     CONFIG_FUSION_MAX_SGE  < 16
+#ifdef CONFIG_FUSION_MAX_SGE
+#if CONFIG_FUSION_MAX_SGE  < 16
 #define MPT_SCSI_SG_DEPTH	16
-#elif   CONFIG_FUSION_MAX_SGE  > 128
+#elif CONFIG_FUSION_MAX_SGE  > 128
 #define MPT_SCSI_SG_DEPTH	128
 #else
 #define MPT_SCSI_SG_DEPTH	CONFIG_FUSION_MAX_SGE
@@ -173,6 +175,18 @@
 #define MPT_SCSI_SG_DEPTH	40
 #endif
 
+#ifdef CONFIG_FUSION_MAX_FC_SGE
+#if CONFIG_FUSION_MAX_FC_SGE  < 16
+#define MPT_SCSI_FC_SG_DEPTH	16
+#elif CONFIG_FUSION_MAX_FC_SGE  > 256
+#define MPT_SCSI_FC_SG_DEPTH	256
+#else
+#define MPT_SCSI_FC_SG_DEPTH	CONFIG_FUSION_MAX_FC_SGE
+#endif
+#else
+#define MPT_SCSI_FC_SG_DEPTH	40
+#endif
+
 /* debug print string length used for events and iocstatus */
 # define EVENT_DESCR_STR_SZ             100
 
@@ -431,38 +445,36 @@ do { \
  *	IOCTL structure and associated defines
  */
 
-#define MPT_IOCTL_STATUS_DID_IOCRESET	0x01	/* IOC Reset occurred on the current*/
-#define MPT_IOCTL_STATUS_RF_VALID	0x02	/* The Reply Frame is VALID */
-#define MPT_IOCTL_STATUS_TIMER_ACTIVE	0x04	/* The timer is running */
-#define MPT_IOCTL_STATUS_SENSE_VALID	0x08	/* Sense data is valid */
-#define MPT_IOCTL_STATUS_COMMAND_GOOD	0x10	/* Command Status GOOD */
-#define MPT_IOCTL_STATUS_TMTIMER_ACTIVE	0x20	/* The TM timer is running */
-#define MPT_IOCTL_STATUS_TM_FAILED	0x40	/* User TM request failed */
-
 #define MPTCTL_RESET_OK			0x01	/* Issue Bus Reset */
 
-typedef struct _MPT_IOCTL {
-	struct _MPT_ADAPTER	*ioc;
-	u8			 ReplyFrame[MPT_DEFAULT_FRAME_SIZE];	/* reply frame data */
-	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
-	int			 wait_done;	/* wake-up value for this ioc */
-	u8			 rsvd;
-	u8			 status;	/* current command status */
-	u8			 reset;		/* 1 if bus reset allowed */
-	u8			 id;		/* target for reset */
-	struct mutex		 ioctl_mutex;
-} MPT_IOCTL;
-
-#define MPT_SAS_MGMT_STATUS_RF_VALID	0x02	/* The Reply Frame is VALID */
-#define MPT_SAS_MGMT_STATUS_COMMAND_GOOD	0x10	/* Command Status GOOD */
-#define MPT_SAS_MGMT_STATUS_TM_FAILED	0x40	/* User TM request failed */
-
-typedef struct _MPT_SAS_MGMT {
+#define MPT_MGMT_STATUS_RF_VALID	0x01	/* The Reply Frame is VALID */
+#define MPT_MGMT_STATUS_COMMAND_GOOD	0x02	/* Command Status GOOD */
+#define MPT_MGMT_STATUS_PENDING		0x04	/* command is pending */
+#define MPT_MGMT_STATUS_DID_IOCRESET	0x08	/* IOC Reset occurred
+						   on the current*/
+#define MPT_MGMT_STATUS_SENSE_VALID	0x10	/* valid sense info */
+#define MPT_MGMT_STATUS_TIMER_ACTIVE	0x20	/* obsolete */
+#define MPT_MGMT_STATUS_FREE_MF		0x40	/* free the mf from
+						   complete routine */
+
+#define INITIALIZE_MGMT_STATUS(status) \
+	status = MPT_MGMT_STATUS_PENDING;
+#define CLEAR_MGMT_STATUS(status) \
+	status = 0;
+#define CLEAR_MGMT_PENDING_STATUS(status) \
+	status &= ~MPT_MGMT_STATUS_PENDING;
+#define SET_MGMT_MSG_CONTEXT(msg_context, value) \
+	msg_context = value;
+
+typedef struct _MPT_MGMT {
 	struct mutex		 mutex;
 	struct completion	 done;
 	u8			 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
+	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
 	u8			 status;	/* current command status */
-}MPT_SAS_MGMT;
+	int			 completion_code;
+	u32			 msg_context;
+} MPT_MGMT;
 
 /*
  *  Event Structure and define
@@ -564,6 +576,10 @@ struct mptfc_rport_info
 	u8		flags;
 };
 
+typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
+typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
+		dma_addr_t dma_addr);
+
 /*
  *  Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
  */
@@ -573,6 +589,10 @@ typedef struct _MPT_ADAPTER
 	int			 pci_irq;	/* This irq           */
 	char			 name[MPT_NAME_LENGTH];	/* "iocN"             */
 	char			 prod_name[MPT_NAME_LENGTH];	/* "LSIFC9x9"         */
+#ifdef CONFIG_FUSION_LOGGING
+	/* used in mpt_display_event_info */
+	char			 evStr[EVENT_DESCR_STR_SZ];
+#endif
 	char			 board_name[16];
 	char			 board_assembly[16];
 	char			 board_tracer[16];
@@ -600,6 +620,10 @@ typedef struct _MPT_ADAPTER
 	int			 reply_depth;	/* Num Allocated reply frames */
 	int			 reply_sz;	/* Reply frame size */
 	int			 num_chain;	/* Number of chain buffers */
+	MPT_ADD_SGE              add_sge;       /* Pointer to add_sge
+						   function */
+	MPT_ADD_CHAIN		 add_chain;	/* Pointer to add_chain
+						   function */
 		/* Pool of buffers for chaining. ReqToChain
 		 * and ChainToChain track index of chain buffers.
 		 * ChainBuffer (DMA) virt/phys addresses.
@@ -640,11 +664,8 @@ typedef struct _MPT_ADAPTER
 	RaidCfgData		raid_data;	/* Raid config. data */
 	SasCfgData		sas_data;	/* Sas config. data */
 	FcCfgData		fc_data;	/* Fc config. data */
-	MPT_IOCTL		*ioctl;		/* ioctl data pointer */
 	struct proc_dir_entry	*ioc_dentry;
 	struct _MPT_ADAPTER	*alt_ioc;	/* ptr to 929 bound adapter port */
-	spinlock_t		 diagLock;	/* diagnostic reset lock */
-	int			 diagPending;
 	u32			 biosVersion;	/* BIOS version from IO Unit Page 2 */
 	int			 eventTypes;	/* Event logging parameters */
 	int			 eventContext;	/* Next event context */
@@ -652,7 +673,6 @@ typedef struct _MPT_ADAPTER
 	struct _mpt_ioctl_events *events;	/* pointer to event log */
 	u8			*cached_fw;	/* Pointer to FW */
 	dma_addr_t	 	cached_fw_dma;
-	struct list_head	 configQ;	/* linked list of config. requests */
 	int			 hs_reply_idx;
 #ifndef MFCNT
 	u32			 pad0;
@@ -665,9 +685,6 @@ typedef struct _MPT_ADAPTER
 	IOCFactsReply_t		 facts;
 	PortFactsReply_t	 pfacts[2];
 	FCPortPage0_t		 fc_port_page0[2];
-	struct timer_list	 persist_timer;	/* persist table timer */
-	int			 persist_wait_done; /* persist completion flag */
-	u8			 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */
 	LANPage0_t		 lan_cnfg_page0;
 	LANPage1_t		 lan_cnfg_page1;
 
@@ -682,23 +699,44 @@ typedef struct _MPT_ADAPTER
 	int			 aen_event_read_flag; /* flag to indicate event log was read*/
 	u8			 FirstWhoInit;
 	u8			 upload_fw;	/* If set, do a fw upload */
-	u8			 reload_fw;	/* Force a FW Reload on next reset */
 	u8			 NBShiftFactor;  /* NB Shift Factor based on Block Size (Facts)  */
 	u8			 pad1[4];
 	u8			 DoneCtx;
 	u8			 TaskCtx;
 	u8			 InternalCtx;
-	spinlock_t		 initializing_hba_lock;
-	int 	 		 initializing_hba_lock_flag;
 	struct list_head	 list;
 	struct net_device	*netdev;
 	struct list_head	 sas_topology;
 	struct mutex		 sas_topology_mutex;
+
+	struct workqueue_struct	*fw_event_q;
+	struct list_head	 fw_event_list;
+	spinlock_t		 fw_event_lock;
+	u8			 fw_events_off; /* if '1', then ignore events */
+	char 			 fw_event_q_name[MPT_KOBJ_NAME_LEN];
+
 	struct mutex		 sas_discovery_mutex;
 	u8			 sas_discovery_runtime;
 	u8			 sas_discovery_ignore_events;
+
+	/* port_info object for the host */
+	struct mptsas_portinfo	*hba_port_info;
+	u64			 hba_port_sas_addr;
+	u16			 hba_port_num_phy;
+	struct list_head	 sas_device_info_list;
+	struct mutex		 sas_device_info_mutex;
+	u8			 old_sas_discovery_protocal;
+	u8			 sas_discovery_quiesce_io;
 	int			 sas_index; /* index refrencing */
-	MPT_SAS_MGMT		 sas_mgmt;
+	MPT_MGMT		 sas_mgmt;
+	MPT_MGMT		 mptbase_cmds; /* for sending config pages */
+	MPT_MGMT		 internal_cmds;
+	MPT_MGMT		 taskmgmt_cmds;
+	MPT_MGMT		 ioctl_cmds;
+	spinlock_t		 taskmgmt_lock; /* diagnostic reset lock */
+	int			 taskmgmt_in_progress;
+	u8			 taskmgmt_quiesce_io;
+	u8			 ioc_reset_in_progress;
 	struct work_struct	 sas_persist_task;
 
 	struct work_struct	 fc_setup_reset_work;
@@ -707,15 +745,27 @@ typedef struct _MPT_ADAPTER
 	u8			 fc_link_speed[2];
 	spinlock_t		 fc_rescan_work_lock;
 	struct work_struct	 fc_rescan_work;
-	char			 fc_rescan_work_q_name[20];
+	char			 fc_rescan_work_q_name[MPT_KOBJ_NAME_LEN];
 	struct workqueue_struct *fc_rescan_work_q;
+
+	/* driver forced bus resets count */
+	unsigned long		  hard_resets;
+	/* fw/external bus resets count */
+	unsigned long		  soft_resets;
+	/* cmd timeouts */
+	unsigned long		  timeouts;
+
 	struct scsi_cmnd	**ScsiLookup;
 	spinlock_t		  scsi_lookup_lock;
-
-	char			 reset_work_q_name[20];
+	u64			dma_mask;
+	u32			  broadcast_aen_busy;
+	char			 reset_work_q_name[MPT_KOBJ_NAME_LEN];
 	struct workqueue_struct *reset_work_q;
 	struct delayed_work	 fault_reset_work;
-	spinlock_t		 fault_reset_work_lock;
+
+	u8			sg_addr_size;
+	u8			in_rescan;
+	u8			SGE_size;
 
 } MPT_ADAPTER;
 
@@ -753,13 +803,14 @@ typedef struct _mpt_sge {
 	dma_addr_t	Address;
 } MptSge_t;
 
-#define mpt_addr_size() \
-	((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \
-		MPI_SGE_FLAGS_32_BIT_ADDRESSING)
 
-#define mpt_msg_flags() \
-	((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
-		MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32)
+#define mpt_msg_flags(ioc) \
+	(ioc->sg_addr_size == sizeof(u64)) ?		\
+	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : 		\
+	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32
+
+#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \
+	(MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -835,22 +886,14 @@ typedef struct _MPT_SCSI_HOST {
 		/* Pool of memory for holding SCpnts before doing
 		 * OS callbacks. freeQ is the free pool.
 		 */
-	u8			  tmPending;
-	u8			  resetPending;
 	u8			  negoNvram;		/* DV disabled, nego NVRAM */
 	u8			  pad1;
-	u8                        tmState;
 	u8			  rsvd[2];
 	MPT_FRAME_HDR		 *cmdPtr;		/* Ptr to nonOS request */
 	struct scsi_cmnd	 *abortSCpnt;
 	MPT_LOCAL_REPLY		  localReply;		/* internal cmd reply struct */
-	unsigned long		  hard_resets;		/* driver forced bus resets count */
-	unsigned long		  soft_resets;		/* fw/external bus resets count */
-	unsigned long		  timeouts;		/* cmd timeouts */
 	ushort			  sel_timeout[MPT_MAX_FC_DEVICES];
 	char 			  *info_kbuf;
-	wait_queue_head_t	  scandv_waitq;
-	int			  scandv_wait_done;
 	long			  last_queue_full;
 	u16			  tm_iocstatus;
 	u16			  spi_pending;
@@ -870,21 +913,16 @@ struct scsi_cmnd;
  * Generic structure passed to the base mpt_config function.
  */
 typedef struct _x_config_parms {
-	struct list_head	 linkage;	/* linked list */
-	struct timer_list	 timer;		/* timer function for this request  */
 	union {
 		ConfigExtendedPageHeader_t	*ehdr;
 		ConfigPageHeader_t	*hdr;
 	} cfghdr;
 	dma_addr_t		 physAddr;
-	int			 wait_done;	/* wait for this request */
 	u32			 pageAddr;	/* properly formatted */
+	u16			 status;
 	u8			 action;
 	u8			 dir;
 	u8			 timeout;	/* seconds */
-	u8			 pad1;
-	u16			 status;
-	u16			 pad2;
 } CONFIGPARMS;
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -909,7 +947,6 @@ extern MPT_FRAME_HDR	*mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc);
 extern void	 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 extern void	 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 extern void	 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-extern void	 mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr);
 
 extern int	 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
 extern int	 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
@@ -922,6 +959,12 @@ extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc);
 extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 extern int	 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern int	mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+		pRaidPhysDiskPage1_t phys_disk);
+extern int	mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc,
+		u8 phys_disk_num);
+extern int	 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
+extern void	 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
 extern void     mpt_halt_firmware(MPT_ADAPTER *ioc);
 
 
@@ -959,7 +1002,6 @@ extern int mpt_fwfault_debug;
 #define MPT_SGE_FLAGS_END_OF_BUFFER		(0x40000000)
 #define MPT_SGE_FLAGS_LOCAL_ADDRESS		(0x08000000)
 #define MPT_SGE_FLAGS_DIRECTION			(0x04000000)
-#define MPT_SGE_FLAGS_ADDRESSING		(mpt_addr_size() << MPI_SGE_FLAGS_SHIFT)
 #define MPT_SGE_FLAGS_END_OF_LIST		(0x01000000)
 
 #define MPT_SGE_FLAGS_TRANSACTION_ELEMENT	(0x00000000)
@@ -972,14 +1014,12 @@ extern int mpt_fwfault_debug;
 	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
 	 MPT_SGE_FLAGS_END_OF_LIST |	\
 	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_SGE_FLAGS_ADDRESSING | \
 	 MPT_TRANSFER_IOC_TO_HOST)
 #define MPT_SGE_FLAGS_SSIMPLE_WRITE \
 	(MPT_SGE_FLAGS_LAST_ELEMENT |	\
 	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
 	 MPT_SGE_FLAGS_END_OF_LIST |	\
 	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_SGE_FLAGS_ADDRESSING | \
 	 MPT_TRANSFER_HOST_TO_IOC)
 
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index c63817117c0..9b2e2198aee 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -84,6 +84,7 @@ MODULE_VERSION(my_VERSION);
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
 static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS;
+static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS;
 
 static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
 
@@ -127,10 +128,7 @@ static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags
 		struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
 static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
 		struct buflist *buflist, MPT_ADAPTER *ioc);
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl);
-static int  mptctl_bus_reset(MPT_IOCTL *ioctl);
-static int mptctl_set_tm_flags(MPT_SCSI_HOST *hd);
-static void mptctl_free_tm_flags(MPT_ADAPTER *ioc);
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function);
 
 /*
  * Reset Handler cleanup function
@@ -183,10 +181,10 @@ mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
 	int rc = 0;
 
 	if (nonblock) {
-		if (!mutex_trylock(&ioc->ioctl->ioctl_mutex))
+		if (!mutex_trylock(&ioc->ioctl_cmds.mutex))
 			rc = -EAGAIN;
 	} else {
-		if (mutex_lock_interruptible(&ioc->ioctl->ioctl_mutex))
+		if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex))
 			rc = -ERESTARTSYS;
 	}
 	return rc;
@@ -202,99 +200,78 @@ mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
 static int
 mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 {
-	char *sense_data;
-	int sz, req_index;
-	u16 iocStatus;
-	u8 cmd;
+	char	*sense_data;
+	int	req_index;
+	int	sz;
 
-	if (req)
-		 cmd = req->u.hdr.Function;
-	else
-		return 1;
-	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tcompleting mpi function (0x%02X), req=%p, "
-	    "reply=%p\n", ioc->name,  req->u.hdr.Function, req, reply));
-
-	if (ioc->ioctl) {
-
-		if (reply==NULL) {
-
-			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_reply() NULL Reply "
-				"Function=%x!\n", ioc->name, cmd));
+	if (!req)
+		return 0;
 
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-			ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
+	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
+	    "(0x%02X), req=%p, reply=%p\n", ioc->name,  req->u.hdr.Function,
+	    req, reply));
 
-			/* We are done, issue wake up
-	 		*/
-			ioc->ioctl->wait_done = 1;
-			wake_up (&mptctl_wait);
-			return 1;
+	/*
+	 * Handling continuation of the same reply. Processing the first
+	 * reply, and eating the other replys that come later.
+	 */
+	if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext)
+		goto out_continuation;
 
-		}
+	ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 
-		/* Copy the reply frame (which much exist
-		 * for non-SCSI I/O) to the IOC structure.
-		 */
-		memcpy(ioc->ioctl->ReplyFrame, reply,
-			min(ioc->reply_sz, 4*reply->u.reply.MsgLength));
-		ioc->ioctl->status |= MPT_IOCTL_STATUS_RF_VALID;
+	if (!reply)
+		goto out;
 
-		/* Set the command status to GOOD if IOC Status is GOOD
-		 * OR if SCSI I/O cmd and data underrun or recovered error.
-		 */
-		iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
-		if (iocStatus  == MPI_IOCSTATUS_SUCCESS)
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-
-		if (iocStatus || reply->u.reply.IOCLogInfo)
-			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tiocstatus (0x%04X), "
-				"loginfo (0x%08X)\n", ioc->name,
-				iocStatus,
-				le32_to_cpu(reply->u.reply.IOCLogInfo)));
-
-		if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
-			(cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
-
-			if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
-				dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-					"\tscsi_status (0x%02x), scsi_state (0x%02x), "
-					"tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
-					reply->u.sreply.SCSIStatus,
-					reply->u.sreply.SCSIState,
-					le16_to_cpu(reply->u.sreply.TaskTag),
-					le32_to_cpu(reply->u.sreply.TransferCount)));
-
-			ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
-
-			if ((iocStatus == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN) ||
-			(iocStatus == MPI_IOCSTATUS_SCSI_RECOVERED_ERROR)) {
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
-			}
-		}
+	ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength);
+	memcpy(ioc->ioctl_cmds.reply, reply, sz);
 
-		/* Copy the sense data - if present
-		 */
-		if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) &&
-			(reply->u.sreply.SCSIState &
-			 MPI_SCSI_STATE_AUTOSENSE_VALID)){
+	if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo)
+		dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name,
+		    le16_to_cpu(reply->u.reply.IOCStatus),
+		    le32_to_cpu(reply->u.reply.IOCLogInfo)));
+
+	if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+		(req->u.hdr.Function ==
+		 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
+
+		if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
+			dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"scsi_status (0x%02x), scsi_state (0x%02x), "
+			"tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
+			reply->u.sreply.SCSIStatus,
+			reply->u.sreply.SCSIState,
+			le16_to_cpu(reply->u.sreply.TaskTag),
+			le32_to_cpu(reply->u.sreply.TransferCount)));
+
+		if (reply->u.sreply.SCSIState &
+			MPI_SCSI_STATE_AUTOSENSE_VALID) {
 			sz = req->u.scsireq.SenseBufferLength;
 			req_index =
 			    le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
-			sense_data =
-			    ((u8 *)ioc->sense_buf_pool +
+			sense_data = ((u8 *)ioc->sense_buf_pool +
 			     (req_index * MPT_SENSE_BUFFER_ALLOC));
-			memcpy(ioc->ioctl->sense, sense_data, sz);
-			ioc->ioctl->status |= MPT_IOCTL_STATUS_SENSE_VALID;
+			memcpy(ioc->ioctl_cmds.sense, sense_data, sz);
+			ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID;
 		}
+	}
 
-		if (cmd == MPI_FUNCTION_SCSI_TASK_MGMT)
-			mptctl_free_tm_flags(ioc);
-
-		/* We are done, issue wake up
-		 */
-		ioc->ioctl->wait_done = 1;
-		wake_up (&mptctl_wait);
+ out:
+	/* We are done, issue wake up
+	 */
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT)
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->ioctl_cmds.done);
 	}
+
+ out_continuation:
+	if (reply && (reply->u.reply.MsgFlags &
+	    MPI_MSGFLAGS_CONTINUATION_REPLY))
+		return 0;
 	return 1;
 }
 
@@ -304,30 +281,66 @@ mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
  * Expecting an interrupt, however timed out.
  *
  */
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
+static void
+mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 {
-	int rc = 1;
+	unsigned long flags;
 
-	if (ioctl == NULL)
-		return;
-	dctlprintk(ioctl->ioc,
-		   printk(MYIOC_s_DEBUG_FMT ": Timeout Expired! Host %d\n",
-		   ioctl->ioc->name, ioctl->ioc->id));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
+		ioc->name, __func__));
 
-	ioctl->wait_done = 0;
-	if (ioctl->reset & MPTCTL_RESET_OK)
-		rc = mptctl_bus_reset(ioctl);
+	if (mpt_fwfault_debug)
+		mpt_halt_firmware(ioc);
 
-	if (rc) {
-		/* Issue a reset for this device.
-		 * The IOC is not responding.
-		 */
-		dctlprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
-			 ioctl->ioc->name));
-		mpt_HardResetHandler(ioctl->ioc, CAN_SLEEP);
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+		mpt_free_msg_frame(ioc, mf);
+		return;
 	}
-	return;
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
 
+	if (!mptctl_bus_reset(ioc, mf->u.hdr.Function))
+		return;
+
+	/* Issue a reset for this device.
+	 * The IOC is not responding.
+	 */
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
+		 ioc->name));
+	CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+	mpt_HardResetHandler(ioc, CAN_SLEEP);
+	mpt_free_msg_frame(ioc, mf);
+}
+
+static int
+mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+{
+	if (!mf)
+		return 0;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt completed (mf=%p, mr=%p)\n",
+		ioc->name, mf, mr));
+
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+
+	if (!mr)
+		goto out;
+
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->taskmgmt_cmds.reply, mr,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+ out:
+	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->taskmgmt_cmds.done);
+		return 1;
+	}
+	return 0;
 }
 
 /* mptctl_bus_reset
@@ -335,133 +348,150 @@ static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
  * Bus reset code.
  *
  */
-static int mptctl_bus_reset(MPT_IOCTL *ioctl)
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
-	MPT_SCSI_HOST	*hd;
+	SCSITaskMgmtReply_t *pScsiTmReply;
 	int		 ii;
-	int		 retval=0;
-
-
-	ioctl->reset &= ~MPTCTL_RESET_OK;
-
-	if (ioctl->ioc->sh == NULL)
+	int		 retval;
+	unsigned long	 timeout;
+	unsigned long	 time_count;
+	u16		 iocstatus;
+
+	/* bus reset is only good for SCSI IO, RAID PASSTHRU */
+	if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) ||
+	    (function == MPI_FUNCTION_SCSI_IO_REQUEST)) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"TaskMgmt, not SCSI_IO!!\n", ioc->name));
 		return -EPERM;
+	}
 
-	hd = shost_priv(ioctl->ioc->sh);
-	if (hd == NULL)
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 		return -EPERM;
+	}
 
-	/* Single threading ....
-	 */
-	if (mptctl_set_tm_flags(hd) != 0)
-		return -EPERM;
+	retval = 0;
 
 	/* Send request
 	 */
-	if ((mf = mpt_get_msg_frame(mptctl_id, ioctl->ioc)) == NULL) {
-		dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt, no msg frames!!\n",
-				ioctl->ioc->name));
-
-		mptctl_free_tm_flags(ioctl->ioc);
-		return -ENOMEM;
+	mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc);
+	if (mf == NULL) {
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"TaskMgmt, no msg frames!!\n", ioc->name));
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		retval = -ENOMEM;
+		goto mptctl_bus_reset_done;
 	}
 
-	dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
-			ioctl->ioc->name, mf));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+		ioc->name, mf));
 
 	pScsiTm = (SCSITaskMgmt_t *) mf;
-	pScsiTm->TargetID = ioctl->id;
-	pScsiTm->Bus = hd->port;	/* 0 */
-	pScsiTm->ChainOffset = 0;
+	memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
 	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
-	pScsiTm->Reserved = 0;
 	pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS;
-	pScsiTm->Reserved1 = 0;
 	pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
-
+	pScsiTm->TargetID = 0;
+	pScsiTm->Bus = 0;
+	pScsiTm->ChainOffset = 0;
+	pScsiTm->Reserved = 0;
+	pScsiTm->Reserved1 = 0;
+	pScsiTm->TaskMsgContext = 0;
 	for (ii= 0; ii < 8; ii++)
 		pScsiTm->LUN[ii] = 0;
-
 	for (ii=0; ii < 7; ii++)
 		pScsiTm->Reserved2[ii] = 0;
 
-	pScsiTm->TaskMsgContext = 0;
-	dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT
-		"mptctl_bus_reset: issued.\n", ioctl->ioc->name));
-
-	DBG_DUMP_TM_REQUEST_FRAME(ioctl->ioc, (u32 *)mf);
+	switch (ioc->bus_type) {
+	case FC:
+		timeout = 40;
+		break;
+	case SAS:
+		timeout = 30;
+		break;
+	case SPI:
+	default:
+		timeout = 2;
+		break;
+	}
 
-	ioctl->wait_done=0;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt type=%d timeout=%ld\n",
+		ioc->name, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, timeout));
 
-	if ((ioctl->ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
-	    (ioctl->ioc->facts.MsgVersion >= MPI_VERSION_01_05))
-		mpt_put_msg_frame_hi_pri(mptctl_id, ioctl->ioc, mf);
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	time_count = jiffies;
+	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
+	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
+		mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf);
 	else {
-		retval = mpt_send_handshake_request(mptctl_id, ioctl->ioc,
-			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
+		retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc,
+		    sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP);
 		if (retval != 0) {
-			dfailprintk(ioctl->ioc, printk(MYIOC_s_ERR_FMT "_send_handshake FAILED!"
-				" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
-				hd->ioc, mf));
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"TaskMgmt send_handshake FAILED!"
+				" (ioc %p, mf %p, rc=%d) \n", ioc->name,
+				ioc, mf, retval));
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
 			goto mptctl_bus_reset_done;
 		}
 	}
 
 	/* Now wait for the command to complete */
-	ii = wait_event_timeout(mptctl_wait,
-	     ioctl->wait_done == 1,
-	     HZ*5 /* 5 second timeout */);
+	ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
+		mpt_free_msg_frame(ioc, mf);
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			retval = 0;
+		else
+			retval = -1; /* return failure */
+		goto mptctl_bus_reset_done;
+	}
 
-	if(ii <=0 && (ioctl->wait_done != 1 ))  {
-		mpt_free_msg_frame(hd->ioc, mf);
-		ioctl->wait_done = 0;
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
+		retval = -1; /* return failure */
+		goto mptctl_bus_reset_done;
+	}
+
+	pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, "
+	    "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, "
+	    "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus,
+	    pScsiTmReply->TargetID, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+	    le16_to_cpu(pScsiTmReply->IOCStatus),
+	    le32_to_cpu(pScsiTmReply->IOCLogInfo),
+	    pScsiTmReply->ResponseCode,
+	    le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+
+	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SUCCESS)
+		retval = 0;
+	else {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt failed\n", ioc->name));
 		retval = -1; /* return failure */
 	}
 
-mptctl_bus_reset_done:
 
-	mptctl_free_tm_flags(ioctl->ioc);
+ mptctl_bus_reset_done:
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
 	return retval;
 }
 
-static int
-mptctl_set_tm_flags(MPT_SCSI_HOST *hd) {
-	unsigned long flags;
-
-	spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
-
-	if (hd->tmState == TM_STATE_NONE) {
-		hd->tmState = TM_STATE_IN_PROGRESS;
-		hd->tmPending = 1;
-		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
-	} else {
-		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static void
-mptctl_free_tm_flags(MPT_ADAPTER *ioc)
-{
-	MPT_SCSI_HOST * hd;
-	unsigned long flags;
-
-	hd = shost_priv(ioc->sh);
-	if (hd == NULL)
-		return;
-
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-
-	hd->tmState = TM_STATE_NONE;
-	hd->tmPending = 0;
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	return;
-}
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /* mptctl_ioc_reset
@@ -473,22 +503,23 @@ mptctl_free_tm_flags(MPT_ADAPTER *ioc)
 static int
 mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	MPT_IOCTL *ioctl = ioc->ioctl;
-	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC %s_reset routed to IOCTL driver!\n", ioc->name,
-		reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-		reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	if(ioctl == NULL)
-		return 1;
-
 	switch(reset_phase) {
 	case MPT_IOC_SETUP_RESET:
-		ioctl->status |= MPT_IOCTL_STATUS_DID_IOCRESET;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
 		break;
 	case MPT_IOC_POST_RESET:
-		ioctl->status &= ~MPT_IOCTL_STATUS_DID_IOCRESET;
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->ioctl_cmds.done);
+		}
 		break;
-	case MPT_IOC_PRE_RESET:
 	default:
 		break;
 	}
@@ -642,7 +673,7 @@ __mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	else
 		ret = -EINVAL;
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -758,6 +789,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	int			 sge_offset = 0;
 	u16			 iocstat;
 	pFWDownloadReply_t	 ReplyMsg = NULL;
+	unsigned long		 timeleft;
 
 	if (mpt_verify_adapter(ioc, &iocp) < 0) {
 		printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n",
@@ -841,8 +873,9 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	 *	96		8
 	 *	64		4
 	 */
-	maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - sizeof(FWDownloadTCSGE_t))
-			/ (sizeof(dma_addr_t) + sizeof(u32));
+	maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) -
+			sizeof(FWDownloadTCSGE_t))
+			/ iocp->SGE_size;
 	if (numfrags > maxfrags) {
 		ret = -EMLINK;
 		goto fwdl_out;
@@ -870,7 +903,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 		if (nib == 0 || nib == 3) {
 			;
 		} else if (sgIn->Address) {
-			mpt_add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
+			iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
 			n++;
 			if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
 				printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
@@ -882,7 +915,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 		}
 		sgIn++;
 		bl++;
-		sgOut += (sizeof(dma_addr_t) + sizeof(u32));
+		sgOut += iocp->SGE_size;
 	}
 
 	DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags);
@@ -891,16 +924,30 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	 * Finally, perform firmware download.
 	 */
 	ReplyMsg = NULL;
+	SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext);
+	INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status)
 	mpt_put_msg_frame(mptctl_id, iocp, mf);
 
 	/* Now wait for the command to complete */
-	ret = wait_event_timeout(mptctl_wait,
-	     iocp->ioctl->wait_done == 1,
-	     HZ*60);
+retry_wait:
+	timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60);
+	if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+		if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(iocp, mf);
+			goto fwdl_out;
+		}
+		if (!timeleft)
+			mptctl_timeout_expired(iocp, mf);
+		else
+			goto retry_wait;
+		goto fwdl_out;
+	}
 
-	if(ret <=0 && (iocp->ioctl->wait_done != 1 )) {
-	/* Now we need to reset the board */
-		mptctl_timeout_expired(iocp->ioctl);
+	if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+		mpt_free_msg_frame(iocp, mf);
 		ret = -ENODATA;
 		goto fwdl_out;
 	}
@@ -908,7 +955,7 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	if (sgl)
 		kfree_sgl(sgl, sgl_dma, buflist, iocp);
 
-	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl->ReplyFrame;
+	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
 	iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
 	if (iocstat == MPI_IOCSTATUS_SUCCESS) {
 		printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
@@ -932,6 +979,9 @@ mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
 	return 0;
 
 fwdl_out:
+
+	CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status);
+	SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0);
         kfree_sgl(sgl, sgl_dma, buflist, iocp);
 	return ret;
 }
@@ -1003,7 +1053,7 @@ kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
 	 *
 	 */
 	sgl = sglbuf;
-	sg_spill = ((ioc->req_sz - sge_offset)/(sizeof(dma_addr_t) + sizeof(u32))) - 1;
+	sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1;
 	while (bytes_allocd < bytes) {
 		this_alloc = min(alloc_sz, bytes-bytes_allocd);
 		buflist[buflist_ent].len = this_alloc;
@@ -1024,8 +1074,9 @@ kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
 			dma_addr_t dma_addr;
 
 			bytes_allocd += this_alloc;
-			sgl->FlagsLength = (0x10000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|this_alloc);
-			dma_addr = pci_map_single(ioc->pcidev, buflist[buflist_ent].kptr, this_alloc, dir);
+			sgl->FlagsLength = (0x10000000|sgdir|this_alloc);
+			dma_addr = pci_map_single(ioc->pcidev,
+				buflist[buflist_ent].kptr, this_alloc, dir);
 			sgl->Address = dma_addr;
 
 			fragcnt++;
@@ -1771,7 +1822,10 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	int		msgContext;
 	u16		req_idx;
 	ulong 		timeout;
+	unsigned long	timeleft;
 	struct scsi_device *sdev;
+	unsigned long	 flags;
+	u8		 function;
 
 	/* bufIn and bufOut are used for user to kernel space transfers
 	 */
@@ -1784,24 +1838,23 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				__FILE__, __LINE__, iocnum);
 		return -ENODEV;
 	}
-	if (!ioc->ioctl) {
-		printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
-			"No memory available during driver init.\n",
-				__FILE__, __LINE__);
-		return -ENOMEM;
-	} else if (ioc->ioctl->status & MPT_IOCTL_STATUS_DID_IOCRESET) {
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 		printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
-			"Busy with IOC Reset \n", __FILE__, __LINE__);
+			"Busy with diagnostic reset\n", __FILE__, __LINE__);
 		return -EBUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
 	/* Verify that the final request frame will not be too large.
 	 */
 	sz = karg.dataSgeOffset * 4;
 	if (karg.dataInSize > 0)
-		sz += sizeof(dma_addr_t) + sizeof(u32);
+		sz += ioc->SGE_size;
 	if (karg.dataOutSize > 0)
-		sz += sizeof(dma_addr_t) + sizeof(u32);
+		sz += ioc->SGE_size;
 
 	if (sz > ioc->req_sz) {
 		printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1827,10 +1880,12 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 		printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 			"Unable to read MF from mpt_ioctl_command struct @ %p\n",
 			ioc->name, __FILE__, __LINE__, mfPtr);
+		function = -1;
 		rc = -EFAULT;
 		goto done_free_mem;
 	}
 	hdr->MsgContext = cpu_to_le32(msgContext);
+	function = hdr->Function;
 
 
 	/* Verify that this request is allowed.
@@ -1838,7 +1893,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
 	    ioc->name, hdr->Function, mf));
 
-	switch (hdr->Function) {
+	switch (function) {
 	case MPI_FUNCTION_IOC_FACTS:
 	case MPI_FUNCTION_PORT_FACTS:
 		karg.dataOutSize  = karg.dataInSize = 0;
@@ -1893,7 +1948,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			}
 
 			pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
-			pScsiReq->MsgFlags |= mpt_msg_flags();
+			pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
 
 
 			/* verify that app has not requested
@@ -1935,8 +1990,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			pScsiReq->Control = cpu_to_le32(scsidir | qtag);
 			pScsiReq->DataLength = cpu_to_le32(dataSize);
 
-			ioc->ioctl->reset = MPTCTL_RESET_OK;
-			ioc->ioctl->id = pScsiReq->TargetID;
 
 		} else {
 			printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1979,7 +2032,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			int dataSize;
 
 			pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
-			pScsiReq->MsgFlags |= mpt_msg_flags();
+			pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
 
 
 			/* verify that app has not requested
@@ -2014,8 +2067,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			pScsiReq->Control = cpu_to_le32(scsidir | qtag);
 			pScsiReq->DataLength = cpu_to_le32(dataSize);
 
-			ioc->ioctl->reset = MPTCTL_RESET_OK;
-			ioc->ioctl->id = pScsiReq->TargetID;
 		} else {
 			printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 				"SCSI driver is not loaded. \n",
@@ -2026,20 +2077,17 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 		break;
 
 	case MPI_FUNCTION_SCSI_TASK_MGMT:
-		{
-			MPT_SCSI_HOST *hd = NULL;
-			if ((ioc->sh == NULL) || ((hd = shost_priv(ioc->sh)) == NULL)) {
-				printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
-					"SCSI driver not loaded or SCSI host not found. \n",
-					ioc->name, __FILE__, __LINE__);
-				rc = -EFAULT;
-				goto done_free_mem;
-			} else if (mptctl_set_tm_flags(hd) != 0) {
-				rc = -EPERM;
-				goto done_free_mem;
-			}
-		}
+	{
+		SCSITaskMgmt_t	*pScsiTm;
+		pScsiTm = (SCSITaskMgmt_t *)mf;
+		dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"\tTaskType=0x%x MsgFlags=0x%x "
+			"TaskMsgContext=0x%x id=%d channel=%d\n",
+			ioc->name, pScsiTm->TaskType, le32_to_cpu
+			(pScsiTm->TaskMsgContext), pScsiTm->MsgFlags,
+			pScsiTm->TargetID, pScsiTm->Bus));
 		break;
+	}
 
 	case MPI_FUNCTION_IOC_INIT:
 		{
@@ -2123,8 +2171,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			if (karg.dataInSize > 0) {
 				flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 						MPI_SGE_FLAGS_END_OF_BUFFER |
-						MPI_SGE_FLAGS_DIRECTION |
-						mpt_addr_size() )
+						MPI_SGE_FLAGS_DIRECTION)
 						<< MPI_SGE_FLAGS_SHIFT;
 			} else {
 				flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
@@ -2141,8 +2188,8 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				/* Set up this SGE.
 				 * Copy to MF and to sglbuf
 				 */
-				mpt_add_sge(psge, flagsLength, dma_addr_out);
-				psge += (sizeof(u32) + sizeof(dma_addr_t));
+				ioc->add_sge(psge, flagsLength, dma_addr_out);
+				psge += ioc->SGE_size;
 
 				/* Copy user data to kernel space.
 				 */
@@ -2175,18 +2222,25 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				/* Set up this SGE
 				 * Copy to MF and to sglbuf
 				 */
-				mpt_add_sge(psge, flagsLength, dma_addr_in);
+				ioc->add_sge(psge, flagsLength, dma_addr_in);
 			}
 		}
 	} else  {
 		/* Add a NULL SGE
 		 */
-		mpt_add_sge(psge, flagsLength, (dma_addr_t) -1);
+		ioc->add_sge(psge, flagsLength, (dma_addr_t) -1);
 	}
 
-	ioc->ioctl->wait_done = 0;
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext);
+	INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
 	if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
 
+		mutex_lock(&ioc->taskmgmt_cmds.mutex);
+		if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+			mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			goto done_free_mem;
+		}
+
 		DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
 
 		if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
@@ -2197,10 +2251,11 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 				sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
 			if (rc != 0) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				    "_send_handshake FAILED! (ioc %p, mf %p)\n",
+				    "send_handshake FAILED! (ioc %p, mf %p)\n",
 				    ioc->name, ioc, mf));
-				mptctl_free_tm_flags(ioc);
+				mpt_clear_taskmgmt_in_progress_flag(ioc);
 				rc = -ENODATA;
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
 				goto done_free_mem;
 			}
 		}
@@ -2210,36 +2265,47 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 	/* Now wait for the command to complete */
 	timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
-	timeout = wait_event_timeout(mptctl_wait,
-	     ioc->ioctl->wait_done == 1,
-	     HZ*timeout);
-
-	if(timeout <=0 && (ioc->ioctl->wait_done != 1 )) {
-	/* Now we need to reset the board */
-
-		if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT)
-			mptctl_free_tm_flags(ioc);
-
-		mptctl_timeout_expired(ioc->ioctl);
-		rc = -ENODATA;
+retry_wait:
+	timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+				HZ*timeout);
+	if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		rc = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
+		    ioc->name, __func__));
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			goto done_free_mem;
+		}
+		if (!timeleft) {
+			if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+				mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+			mptctl_timeout_expired(ioc, mf);
+			mf = NULL;
+		} else
+			goto retry_wait;
 		goto done_free_mem;
 	}
 
+	if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+
 	mf = NULL;
 
 	/* If a valid reply frame, copy to the user.
 	 * Offset 2: reply length in U32's
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID) {
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) {
 		if (karg.maxReplyBytes < ioc->reply_sz) {
-			 sz = min(karg.maxReplyBytes, 4*ioc->ioctl->ReplyFrame[2]);
+			sz = min(karg.maxReplyBytes,
+				4*ioc->ioctl_cmds.reply[2]);
 		} else {
-			 sz = min(ioc->reply_sz, 4*ioc->ioctl->ReplyFrame[2]);
+			 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]);
 		}
-
 		if (sz > 0) {
 			if (copy_to_user(karg.replyFrameBufPtr,
-				 &ioc->ioctl->ReplyFrame, sz)){
+				 ioc->ioctl_cmds.reply, sz)){
 				 printk(MYIOC_s_ERR_FMT
 				     "%s@%d::mptctl_do_mpt_command - "
 				 "Unable to write out reply frame %p\n",
@@ -2252,10 +2318,11 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 	/* If valid sense data, copy to user.
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_SENSE_VALID) {
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) {
 		sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
 		if (sz > 0) {
-			if (copy_to_user(karg.senseDataPtr, ioc->ioctl->sense, sz)) {
+			if (copy_to_user(karg.senseDataPtr,
+				ioc->ioctl_cmds.sense, sz)) {
 				printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
 				"Unable to write sense data to user %p\n",
 				ioc->name, __FILE__, __LINE__,
@@ -2269,7 +2336,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	/* If the overall status is _GOOD and data in, copy data
 	 * to user.
 	 */
-	if ((ioc->ioctl->status & MPT_IOCTL_STATUS_COMMAND_GOOD) &&
+	if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) &&
 				(karg.dataInSize > 0) && (bufIn.kptr)) {
 
 		if (copy_to_user(karg.dataInBufPtr,
@@ -2284,9 +2351,8 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 done_free_mem:
 
-	ioc->ioctl->status &= ~(MPT_IOCTL_STATUS_COMMAND_GOOD |
-		MPT_IOCTL_STATUS_SENSE_VALID |
-		MPT_IOCTL_STATUS_RF_VALID );
+	CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
 
 	/* Free the allocated memory.
 	 */
@@ -2336,6 +2402,8 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	ToolboxIstwiReadWriteRequest_t	*IstwiRWRequest;
 	MPT_FRAME_HDR		*mf = NULL;
 	MPIHeader_t		*mpi_hdr;
+	unsigned long		timeleft;
+	int			retval;
 
 	/* Reset long to int. Should affect IA64 and SPARC only
 	 */
@@ -2466,9 +2534,9 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 		MPT_SCSI_HOST *hd =  shost_priv(ioc->sh);
 
 		if (hd && (cim_rev == 1)) {
-			karg.hard_resets = hd->hard_resets;
-			karg.soft_resets = hd->soft_resets;
-			karg.timeouts = hd->timeouts;
+			karg.hard_resets = ioc->hard_resets;
+			karg.soft_resets = ioc->soft_resets;
+			karg.timeouts = ioc->timeouts;
 		}
 	}
 
@@ -2476,8 +2544,8 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	 * Gather ISTWI(Industry Standard Two Wire Interface) Data
 	 */
 	if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__func__));
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, no msg frames!!\n", ioc->name, __func__));
 		goto out;
 	}
 
@@ -2498,22 +2566,29 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
 	if (!pbuf)
 		goto out;
-	mpt_add_sge((char *)&IstwiRWRequest->SGL,
+	ioc->add_sge((char *)&IstwiRWRequest->SGL,
 	    (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
 
-	ioc->ioctl->wait_done = 0;
+	retval = 0;
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context,
+				IstwiRWRequest->MsgContext);
+	INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
 	mpt_put_msg_frame(mptctl_id, ioc, mf);
 
-	rc = wait_event_timeout(mptctl_wait,
-	     ioc->ioctl->wait_done == 1,
-	     HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
-
-	if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
-		/*
-		 * Now we need to reset the board
-		 */
-		mpt_free_msg_frame(ioc, mf);
-		mptctl_timeout_expired(ioc->ioctl);
+retry_wait:
+	timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+			HZ*MPT_IOCTL_DEFAULT_TIMEOUT);
+	if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = -ETIME;
+		printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
+		if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(ioc, mf);
+			goto out;
+		}
+		if (!timeleft)
+			mptctl_timeout_expired(ioc, mf);
+		else
+			goto retry_wait;
 		goto out;
 	}
 
@@ -2526,10 +2601,13 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	 *   bays have drives in them
 	 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
 	 */
-	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+	if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)
 		karg.rsvd = *(u32 *)pbuf;
 
  out:
+	CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+	SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
+
 	if (pbuf)
 		pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
 
@@ -2753,7 +2831,7 @@ compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd,
 
 	ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -2807,7 +2885,7 @@ compat_mpt_command(struct file *filp, unsigned int cmd,
 	 */
 	ret = mptctl_do_mpt_command (karg, &uarg->MF);
 
-	mutex_unlock(&iocp->ioctl->ioctl_mutex);
+	mutex_unlock(&iocp->ioctl_cmds.mutex);
 
 	return ret;
 }
@@ -2859,21 +2937,10 @@ static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long a
 static int
 mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	MPT_IOCTL *mem;
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 
-	/*
-	 * Allocate and inite a MPT_IOCTL structure
-	*/
-	mem = kzalloc(sizeof(MPT_IOCTL), GFP_KERNEL);
-	if (!mem) {
-		mptctl_remove(pdev);
-		return -ENOMEM;
-	}
-
-	ioc->ioctl = mem;
-	ioc->ioctl->ioc = ioc;
-	mutex_init(&ioc->ioctl->ioctl_mutex);
+	mutex_init(&ioc->ioctl_cmds.mutex);
+	init_completion(&ioc->ioctl_cmds.done);
 	return 0;
 }
 
@@ -2887,9 +2954,6 @@ mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 static void
 mptctl_remove(struct pci_dev *pdev)
 {
-	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
-
-	kfree ( ioc->ioctl );
 }
 
 static struct mpt_pci_driver mptctl_driver = {
@@ -2929,6 +2993,7 @@ static int __init mptctl_init(void)
 		goto out_fail;
 	}
 
+	mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER);
 	mpt_reset_register(mptctl_id, mptctl_ioc_reset);
 	mpt_event_register(mptctl_id, mptctl_event_process);
 
@@ -2953,6 +3018,7 @@ static void mptctl_exit(void)
 
 	/* De-register callback handler from base module */
 	mpt_deregister(mptctl_id);
+	mpt_reset_deregister(mptctl_taskmgmt_id);
 
         mpt_device_driver_deregister(MPTCTL_DRIVER);
 
diff --git a/drivers/message/fusion/mptdebug.h b/drivers/message/fusion/mptdebug.h
index 510b9f49209..28e47887928 100644
--- a/drivers/message/fusion/mptdebug.h
+++ b/drivers/message/fusion/mptdebug.h
@@ -58,6 +58,7 @@
 #define MPT_DEBUG_FC			0x00080000
 #define MPT_DEBUG_SAS			0x00100000
 #define MPT_DEBUG_SAS_WIDE		0x00200000
+#define MPT_DEBUG_36GB_MEM              0x00400000
 
 /*
  * CONFIG_FUSION_LOGGING - enabled in Kconfig
@@ -135,6 +136,8 @@
 #define dsaswideprintk(IOC, CMD)		\
 	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
 
+#define d36memprintk(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_36GB_MEM)
 
 
 /*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c3c24fdf9fb..e61df133a59 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1251,17 +1251,15 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -1292,9 +1290,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -1312,8 +1307,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	hd->timer.data = (unsigned long) hd;
 	hd->timer.function = mptscsih_timer_expired;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 
 	sh->transportt = mptfc_transport_template;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index a9019f081b9..20e0b447e8e 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -93,8 +93,37 @@ static u8	mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
 static u8	mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
 static u8	mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
 static u8	mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
-
-static void mptsas_hotplug_work(struct work_struct *work);
+static u8	mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS;
+
+static void mptsas_firmware_event_work(struct work_struct *work);
+static void mptsas_send_sas_event(struct fw_event_work *fw_event);
+static void mptsas_send_raid_event(struct fw_event_work *fw_event);
+static void mptsas_send_ir2_event(struct fw_event_work *fw_event);
+static void mptsas_parse_device_info(struct sas_identify *identify,
+		struct mptsas_devinfo *device_info);
+static inline void mptsas_set_rphy(MPT_ADAPTER *ioc,
+		struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy);
+static struct mptsas_phyinfo	*mptsas_find_phyinfo_by_sas_address
+		(MPT_ADAPTER *ioc, u64 sas_address);
+static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc,
+	struct mptsas_devinfo *device_info, u32 form, u32 form_specific);
+static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc,
+	struct mptsas_enclosure *enclosure, u32 form, u32 form_specific);
+static int mptsas_add_end_device(MPT_ADAPTER *ioc,
+	struct mptsas_phyinfo *phy_info);
+static void mptsas_del_end_device(MPT_ADAPTER *ioc,
+	struct mptsas_phyinfo *phy_info);
+static void mptsas_send_link_status_event(struct fw_event_work *fw_event);
+static struct mptsas_portinfo	*mptsas_find_portinfo_by_sas_address
+		(MPT_ADAPTER *ioc, u64 sas_address);
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+		struct mptsas_portinfo *port_info, u8 force);
+static void mptsas_send_expander_event(struct fw_event_work *fw_event);
+static void mptsas_not_responding_devices(MPT_ADAPTER *ioc);
+static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc);
+static void mptsas_broadcast_primative_work(struct fw_event_work *fw_event);
+static void mptsas_handle_queue_full_event(struct fw_event_work *fw_event);
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id);
 
 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
 					MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -218,30 +247,125 @@ static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
 	    le16_to_cpu(pg1->AttachedDevHandle)));
 }
 
-static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
+/* inhibit sas firmware event handling */
+static void
+mptsas_fw_event_off(MPT_ADAPTER *ioc)
 {
-	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
-	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	ioc->fw_events_off = 1;
+	ioc->sas_discovery_quiesce_io = 0;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
 }
 
-static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
+/* enable sas firmware event handling */
+static void
+mptsas_fw_event_on(MPT_ADAPTER *ioc)
 {
-	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
-	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	ioc->fw_events_off = 0;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
-static struct mptsas_portinfo *
-mptsas_get_hba_portinfo(MPT_ADAPTER *ioc)
+/* queue a sas firmware event */
+static void
+mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
 {
-	struct list_head	*head = &ioc->sas_topology;
-	struct mptsas_portinfo	*pi = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_add_tail(&fw_event->list, &ioc->fw_event_list);
+	INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)\n",
+	    ioc->name, __func__, fw_event));
+	queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+	    delay);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* requeue a sas firmware event */
+static void
+mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task "
+	    "(fw_event=0x%p)\n", ioc->name, __func__, fw_event));
+	fw_event->retries++;
+	queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+	    msecs_to_jiffies(delay));
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* free memory assoicated to a sas firmware event */
+static void
+mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n",
+	    ioc->name, __func__, fw_event));
+	list_del(&fw_event->list);
+	kfree(fw_event);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* walk the firmware event queue, and either stop or wait for
+ * outstanding events to complete */
+static void
+mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event, *next;
+	struct mptsas_target_reset_event *target_reset_list, *n;
+	u8	flush_q;
+	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
+
+	/* flush the target_reset_list */
+	if (!list_empty(&hd->target_reset_list)) {
+		list_for_each_entry_safe(target_reset_list, n,
+		    &hd->target_reset_list, list) {
+			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			    "%s: removing target reset for id=%d\n",
+			    ioc->name, __func__,
+			   target_reset_list->sas_event_data.TargetID));
+			list_del(&target_reset_list->list);
+			kfree(target_reset_list);
+		}
+	}
+
+	if (list_empty(&ioc->fw_event_list) ||
+	     !ioc->fw_event_q || in_interrupt())
+		return;
 
-	/* always the first entry on sas_topology list */
+	flush_q = 0;
+	list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
+		if (cancel_delayed_work(&fw_event->work))
+			mptsas_free_fw_event(ioc, fw_event);
+		else
+			flush_q = 1;
+	}
+	if (flush_q)
+		flush_workqueue(ioc->fw_event_q);
+}
 
-	if (!list_empty(head))
-		pi = list_entry(head->next, struct mptsas_portinfo, list);
 
-	return pi;
+static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
+{
+	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+}
+
+static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
+{
+	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+	return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
 }
 
 /*
@@ -265,6 +389,38 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
 	return rc;
 }
 
+/**
+ *	mptsas_find_portinfo_by_sas_address -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@handle:
+ *
+ *	This function should be called with the sas_topology_mutex already held
+ *
+ **/
+static struct mptsas_portinfo *
+mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
+{
+	struct mptsas_portinfo *port_info, *rc = NULL;
+	int i;
+
+	if (sas_address >= ioc->hba_port_sas_addr &&
+	    sas_address < (ioc->hba_port_sas_addr +
+	    ioc->hba_port_num_phy))
+		return ioc->hba_port_info;
+
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_for_each_entry(port_info, &ioc->sas_topology, list)
+		for (i = 0; i < port_info->num_phys; i++)
+			if (port_info->phy_info[i].identify.sas_address ==
+			    sas_address) {
+				rc = port_info;
+				goto out;
+			}
+ out:
+	mutex_unlock(&ioc->sas_topology_mutex);
+	return rc;
+}
+
 /*
  * Returns true if there is a scsi end device
  */
@@ -308,6 +464,7 @@ mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_detai
 		if(phy_info->port_details != port_details)
 			continue;
 		memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+		mptsas_set_rphy(ioc, phy_info, NULL);
 		phy_info->port_details = NULL;
 	}
 	kfree(port_details);
@@ -379,6 +536,285 @@ starget)
 		phy_info->port_details->starget = starget;
 }
 
+/**
+ *	mptsas_add_device_component -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: fw mapped id's
+ *	@id:
+ *	@sas_address:
+ *	@device_info:
+ *
+ **/
+static void
+mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id,
+	u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id)
+{
+	struct mptsas_device_info	*sas_info, *next;
+	struct scsi_device	*sdev;
+	struct scsi_target	*starget;
+	struct sas_rphy	*rphy;
+
+	/*
+	 * Delete all matching devices out of the list
+	 */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+	    list) {
+		if (!sas_info->is_logical_volume &&
+		    (sas_info->sas_address == sas_address ||
+		    (sas_info->fw.channel == channel &&
+		     sas_info->fw.id == id))) {
+			list_del(&sas_info->list);
+			kfree(sas_info);
+		}
+	}
+
+	sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+	if (!sas_info)
+		goto out;
+
+	/*
+	 * Set Firmware mapping
+	 */
+	sas_info->fw.id = id;
+	sas_info->fw.channel = channel;
+
+	sas_info->sas_address = sas_address;
+	sas_info->device_info = device_info;
+	sas_info->slot = slot;
+	sas_info->enclosure_logical_id = enclosure_logical_id;
+	INIT_LIST_HEAD(&sas_info->list);
+	list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+
+	/*
+	 * Set OS mapping
+	 */
+	shost_for_each_device(sdev, ioc->sh) {
+		starget = scsi_target(sdev);
+		rphy = dev_to_rphy(starget->dev.parent);
+		if (rphy->identify.sas_address == sas_address) {
+			sas_info->os.id = starget->id;
+			sas_info->os.channel = starget->channel;
+		}
+	}
+
+ out:
+	mutex_unlock(&ioc->sas_device_info_mutex);
+	return;
+}
+
+/**
+ *	mptsas_add_device_component_by_fw -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel:  fw mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+	struct mptsas_devinfo sas_device;
+	struct mptsas_enclosure enclosure_info;
+	int rc;
+
+	rc = mptsas_sas_device_pg0(ioc, &sas_device,
+	    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+	     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+	    (channel << 8) + id);
+	if (rc)
+		return;
+
+	memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+	mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+	    (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+	     MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+	     sas_device.handle_enclosure);
+
+	mptsas_add_device_component(ioc, sas_device.channel,
+	    sas_device.id, sas_device.sas_address, sas_device.device_info,
+	    sas_device.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *	mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: fw mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc,
+		struct scsi_target *starget)
+{
+	CONFIGPARMS			cfg;
+	ConfigPageHeader_t		hdr;
+	dma_addr_t			dma_handle;
+	pRaidVolumePage0_t		buffer = NULL;
+	int				i;
+	RaidPhysDiskPage0_t 		phys_disk;
+	struct mptsas_device_info	*sas_info, *next;
+
+	memset(&cfg, 0 , sizeof(CONFIGPARMS));
+	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+	hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+	/* assumption that all volumes on channel = 0 */
+	cfg.pageAddr = starget->id;
+	cfg.cfghdr.hdr = &hdr;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+	cfg.timeout = 10;
+
+	if (mpt_config(ioc, &cfg) != 0)
+		goto out;
+
+	if (!hdr.PageLength)
+		goto out;
+
+	buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+	    &dma_handle);
+
+	if (!buffer)
+		goto out;
+
+	cfg.physAddr = dma_handle;
+	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+	if (mpt_config(ioc, &cfg) != 0)
+		goto out;
+
+	if (!buffer->NumPhysDisks)
+		goto out;
+
+	/*
+	 * Adding entry for hidden components
+	 */
+	for (i = 0; i < buffer->NumPhysDisks; i++) {
+
+		if (mpt_raid_phys_disk_pg0(ioc,
+		    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+			continue;
+
+		mptsas_add_device_component_by_fw(ioc, phys_disk.PhysDiskBus,
+		    phys_disk.PhysDiskID);
+
+		mutex_lock(&ioc->sas_device_info_mutex);
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (!sas_info->is_logical_volume &&
+			    (sas_info->fw.channel == phys_disk.PhysDiskBus &&
+			    sas_info->fw.id == phys_disk.PhysDiskID)) {
+				sas_info->is_hidden_raid_component = 1;
+				sas_info->volume_id = starget->id;
+			}
+		}
+		mutex_unlock(&ioc->sas_device_info_mutex);
+
+	}
+
+	/*
+	 * Delete all matching devices out of the list
+	 */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+	    list) {
+		if (sas_info->is_logical_volume && sas_info->fw.id ==
+		    starget->id) {
+			list_del(&sas_info->list);
+			kfree(sas_info);
+		}
+	}
+
+	sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+	if (sas_info) {
+		sas_info->fw.id = starget->id;
+		sas_info->os.id = starget->id;
+		sas_info->os.channel = starget->channel;
+		sas_info->is_logical_volume = 1;
+		INIT_LIST_HEAD(&sas_info->list);
+		list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+	}
+	mutex_unlock(&ioc->sas_device_info_mutex);
+
+ out:
+	if (buffer)
+		pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+		    dma_handle);
+}
+
+/**
+ *	mptsas_add_device_component_starget -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@starget:
+ *
+ **/
+static void
+mptsas_add_device_component_starget(MPT_ADAPTER *ioc,
+	struct scsi_target *starget)
+{
+	VirtTarget	*vtarget;
+	struct sas_rphy	*rphy;
+	struct mptsas_phyinfo	*phy_info = NULL;
+	struct mptsas_enclosure	enclosure_info;
+
+	rphy = dev_to_rphy(starget->dev.parent);
+	vtarget = starget->hostdata;
+	phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+			rphy->identify.sas_address);
+	if (!phy_info)
+		return;
+
+	memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+	mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+		(MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+		MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+		phy_info->attached.handle_enclosure);
+
+	mptsas_add_device_component(ioc, phy_info->attached.channel,
+		phy_info->attached.id, phy_info->attached.sas_address,
+		phy_info->attached.device_info,
+		phy_info->attached.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *	mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@channel: os mapped id's
+ *	@id:
+ *
+ **/
+static void
+mptsas_del_device_component_by_os(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+	struct mptsas_device_info	*sas_info, *next;
+
+	/*
+	 * Set is_cached flag
+	 */
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+		list) {
+		if (sas_info->os.channel == channel && sas_info->os.id == id)
+			sas_info->is_cached = 1;
+	}
+}
+
+/**
+ *	mptsas_del_device_components - Cleaning the list
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_del_device_components(MPT_ADAPTER *ioc)
+{
+	struct mptsas_device_info	*sas_info, *next;
+
+	mutex_lock(&ioc->sas_device_info_mutex);
+	list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+		list) {
+		list_del(&sas_info->list);
+		kfree(sas_info);
+	}
+	mutex_unlock(&ioc->sas_device_info_mutex);
+}
+
 
 /*
  * mptsas_setup_wide_ports
@@ -434,8 +870,8 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 		 * Forming a port
 		 */
 		if (!port_details) {
-			port_details = kzalloc(sizeof(*port_details),
-				GFP_KERNEL);
+			port_details = kzalloc(sizeof(struct
+				mptsas_portinfo_details), GFP_KERNEL);
 			if (!port_details)
 				goto out;
 			port_details->num_phys = 1;
@@ -523,15 +959,62 @@ mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id)
 	VirtTarget 			*vtarget = NULL;
 
 	shost_for_each_device(sdev, ioc->sh) {
-		if ((vdevice = sdev->hostdata) == NULL)
+		vdevice = sdev->hostdata;
+		if ((vdevice == NULL) ||
+			(vdevice->vtarget == NULL))
+			continue;
+		if ((vdevice->vtarget->tflags &
+		    MPT_TARGET_FLAGS_RAID_COMPONENT ||
+		    vdevice->vtarget->raidVolume))
 			continue;
 		if (vdevice->vtarget->id == id &&
-		    vdevice->vtarget->channel == channel)
+			vdevice->vtarget->channel == channel)
 			vtarget = vdevice->vtarget;
 	}
 	return vtarget;
 }
 
+static void
+mptsas_queue_device_delete(MPT_ADAPTER *ioc,
+	MpiEventDataSasDeviceStatusChange_t *sas_event_data)
+{
+	struct fw_event_work *fw_event;
+	int sz;
+
+	sz = offsetof(struct fw_event_work, event_data) +
+	    sizeof(MpiEventDataSasDeviceStatusChange_t);
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+		return;
+	}
+	memcpy(fw_event->event_data, sas_event_data,
+	    sizeof(MpiEventDataSasDeviceStatusChange_t));
+	fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+static void
+mptsas_queue_rescan(MPT_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+	int sz;
+
+	sz = offsetof(struct fw_event_work, event_data);
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+		return;
+	}
+	fw_event->event = -1;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+
 /**
  * mptsas_target_reset
  *
@@ -550,13 +1033,21 @@ mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSITaskMgmt_t	*pScsiTm;
-
-	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
-		    ioc->name,__func__, __LINE__));
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0)
 		return 0;
+
+
+	mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+	if (mf == NULL) {
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, no msg frames @%d!!\n", ioc->name,
+			__func__, __LINE__));
+		goto out_fail;
 	}
 
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+		ioc->name, mf));
+
 	/* Format the Request
 	 */
 	pScsiTm = (SCSITaskMgmt_t *) mf;
@@ -569,9 +1060,18 @@ mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
 
 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
 
-	mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	   "TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n",
+	   ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id));
+
+	mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
 
 	return 1;
+
+ out_fail:
+
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
+	return 0;
 }
 
 /**
@@ -602,11 +1102,12 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
 
 	vtarget->deleted = 1; /* block IO */
 
-	target_reset_list = kzalloc(sizeof(*target_reset_list),
+	target_reset_list = kzalloc(sizeof(struct mptsas_target_reset_event),
 	    GFP_ATOMIC);
 	if (!target_reset_list) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__func__, __LINE__));
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+			"%s, failed to allocate mem @%d..!!\n",
+			ioc->name, __func__, __LINE__));
 		return;
 	}
 
@@ -614,84 +1115,101 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
 		sizeof(*sas_event_data));
 	list_add_tail(&target_reset_list->list, &hd->target_reset_list);
 
-	if (hd->resetPending)
-		return;
+	target_reset_list->time_count = jiffies;
 
 	if (mptsas_target_reset(ioc, channel, id)) {
 		target_reset_list->target_reset_issued = 1;
-		hd->resetPending = 1;
 	}
 }
 
 /**
- * mptsas_dev_reset_complete
- *
- * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
- * enable work queue to finish off removing device from upper layers.
- * then send next TARGET_RESET in the queue.
- *
- * @ioc
+ *	mptsas_taskmgmt_complete - complete SAS task management function
+ *	@ioc: Pointer to MPT_ADAPTER structure
  *
+ *	Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work
+ *	queue to finish off removing device from upper layers. then send next
+ *	TARGET_RESET in the queue.
  **/
-static void
-mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
+static int
+mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 {
 	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
         struct list_head *head = &hd->target_reset_list;
-	struct mptsas_target_reset_event *target_reset_list;
-	struct mptsas_hotplug_event *ev;
-	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
 	u8		id, channel;
-	__le64		sas_address;
+	struct mptsas_target_reset_event	*target_reset_list;
+	SCSITaskMgmtReply_t *pScsiTmReply;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: "
+	    "(mf = %p, mr = %p)\n", ioc->name, mf, mr));
+
+	pScsiTmReply = (SCSITaskMgmtReply_t *)mr;
+	if (pScsiTmReply) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "\tTaskMgmt completed: fw_channel = %d, fw_id = %d,\n"
+		    "\ttask_type = 0x%02X, iocstatus = 0x%04X "
+		    "loginfo = 0x%08X,\n\tresponse_code = 0x%02X, "
+		    "term_cmnds = %d\n", ioc->name,
+		    pScsiTmReply->Bus, pScsiTmReply->TargetID,
+		    pScsiTmReply->TaskType,
+		    le16_to_cpu(pScsiTmReply->IOCStatus),
+		    le32_to_cpu(pScsiTmReply->IOCLogInfo),
+		    pScsiTmReply->ResponseCode,
+		    le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+		if (pScsiTmReply->ResponseCode)
+			mptscsih_taskmgmt_response_code(ioc,
+			pScsiTmReply->ResponseCode);
+	}
+
+	if (pScsiTmReply && (pScsiTmReply->TaskType ==
+	    MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK || pScsiTmReply->TaskType ==
+	     MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET)) {
+		ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+		ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+		memcpy(ioc->taskmgmt_cmds.reply, mr,
+		    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+			complete(&ioc->taskmgmt_cmds.done);
+			return 1;
+		}
+		return 0;
+	}
+
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
 
 	if (list_empty(head))
-		return;
+		return 1;
 
-	target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
+	target_reset_list = list_entry(head->next,
+	    struct mptsas_target_reset_event, list);
 
-	sas_event_data = &target_reset_list->sas_event_data;
-	id = sas_event_data->TargetID;
-	channel = sas_event_data->Bus;
-	hd->resetPending = 0;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt: completed (%d seconds)\n",
+	    ioc->name, jiffies_to_msecs(jiffies -
+	    target_reset_list->time_count)/1000));
+
+	id = pScsiTmReply->TargetID;
+	channel = pScsiTmReply->Bus;
+	target_reset_list->time_count = jiffies;
 
 	/*
 	 * retry target reset
 	 */
 	if (!target_reset_list->target_reset_issued) {
-		if (mptsas_target_reset(ioc, channel, id)) {
+		if (mptsas_target_reset(ioc, channel, id))
 			target_reset_list->target_reset_issued = 1;
-			hd->resetPending = 1;
-		}
-		return;
+		return 1;
 	}
 
 	/*
 	 * enable work queue to remove device from upper layers
 	 */
 	list_del(&target_reset_list->list);
+	if ((mptsas_find_vtarget(ioc, channel, id)) && !ioc->fw_events_off)
+		mptsas_queue_device_delete(ioc,
+			&target_reset_list->sas_event_data);
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__func__, __LINE__));
-		return;
-	}
-
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-	ev->parent_handle =
-	    le16_to_cpu(sas_event_data->ParentDevHandle);
-	ev->channel = channel;
-	ev->id =id;
-	ev->phy_id = sas_event_data->PhyNum;
-	memcpy(&sas_address, &sas_event_data->SASAddress,
-	    sizeof(__le64));
-	ev->sas_address = le64_to_cpu(sas_address);
-	ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-	ev->event_type = MPTSAS_DEL_DEVICE;
-	schedule_work(&ev->work);
-	kfree(target_reset_list);
 
 	/*
 	 * issue target reset to next device in the queue
@@ -699,34 +1217,19 @@ mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
 
 	head = &hd->target_reset_list;
 	if (list_empty(head))
-		return;
+		return 1;
 
 	target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
 	    list);
 
-	sas_event_data = &target_reset_list->sas_event_data;
-	id = sas_event_data->TargetID;
-	channel = sas_event_data->Bus;
+	id = target_reset_list->sas_event_data.TargetID;
+	channel = target_reset_list->sas_event_data.Bus;
+	target_reset_list->time_count = jiffies;
 
-	if (mptsas_target_reset(ioc, channel, id)) {
+	if (mptsas_target_reset(ioc, channel, id))
 		target_reset_list->target_reset_issued = 1;
-		hd->resetPending = 1;
-	}
-}
 
-/**
- * mptsas_taskmgmt_complete
- *
- * @ioc
- * @mf
- * @mr
- *
- **/
-static int
-mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
-{
-	mptsas_dev_reset_complete(ioc);
-	return mptscsih_taskmgmt_complete(ioc, mf, mr);
+	return 1;
 }
 
 /**
@@ -740,37 +1243,59 @@ static int
 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
-	struct mptsas_target_reset_event *target_reset_list, *n;
 	int rc;
 
 	rc = mptscsih_ioc_reset(ioc, reset_phase);
+	if ((ioc->bus_type != SAS) || (!rc))
+		return rc;
 
-	if (ioc->bus_type != SAS)
-		goto out;
-
-	if (reset_phase != MPT_IOC_POST_RESET)
-		goto out;
-
-	if (!ioc->sh || !ioc->sh->hostdata)
-		goto out;
 	hd = shost_priv(ioc->sh);
 	if (!hd->ioc)
 		goto out;
 
-	if (list_empty(&hd->target_reset_list))
-		goto out;
-
-	/* flush the target_reset_list */
-	list_for_each_entry_safe(target_reset_list, n,
-	    &hd->target_reset_list, list) {
-		list_del(&target_reset_list->list);
-		kfree(target_reset_list);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		mptsas_fw_event_off(ioc);
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->sas_mgmt.done);
+		}
+		mptsas_cleanup_fw_event_q(ioc);
+		mptsas_queue_rescan(ioc);
+		mptsas_fw_event_on(ioc);
+		break;
+	default:
+		break;
 	}
 
  out:
 	return rc;
 }
 
+
+/**
+ * enum device_state -
+ * @DEVICE_RETRY: need to retry the TUR
+ * @DEVICE_ERROR: TUR return error, don't add device
+ * @DEVICE_READY: device can be added
+ *
+ */
+enum device_state{
+	DEVICE_RETRY,
+	DEVICE_ERROR,
+	DEVICE_READY,
+};
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 		u32 form, u32 form_specific)
@@ -836,15 +1361,308 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 	return error;
 }
 
+/**
+ *	mptsas_add_end_device - report a new end device to sas transport layer
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phy_info: decribes attached device
+ *
+ *	return (0) success (1) failure
+ *
+ **/
+static int
+mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct sas_identify identify;
+	char *ds = NULL;
+	u8 fw_id;
+
+	if (!phy_info) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: exit at line=%d\n", ioc->name,
+			 __func__, __LINE__));
+		return 1;
+	}
+
+	fw_id = phy_info->attached.id;
+
+	if (mptsas_get_rphy(phy_info)) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 2;
+	}
+
+	port = mptsas_get_port(phy_info);
+	if (!port) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 3;
+	}
+
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET)
+		ds = "ssp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET)
+		ds = "stp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+		ds = "sata";
+
+	printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
+	    " phy %d, sas_addr 0x%llx\n", ioc->name, ds,
+	    phy_info->attached.channel, phy_info->attached.id,
+	    phy_info->attached.phy_id, (unsigned long long)
+	    phy_info->attached.sas_address);
+
+	mptsas_parse_device_info(&identify, &phy_info->attached);
+	rphy = sas_end_device_alloc(port);
+	if (!rphy) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return 5; /* non-fatal: an rphy can be added later */
+	}
+
+	rphy->identify = identify;
+	if (sas_rphy_add(rphy)) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		sas_rphy_free(rphy);
+		return 6;
+	}
+	mptsas_set_rphy(ioc, phy_info, rphy);
+	return 0;
+}
+
+/**
+ *	mptsas_del_end_device - report a deleted end device to sas transport layer
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phy_info: decribes attached device
+ *
+ **/
+static void
+mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct mptsas_portinfo *port_info;
+	struct mptsas_phyinfo *phy_info_parent;
+	int i;
+	char *ds = NULL;
+	u8 fw_id;
+	u64 sas_address;
+
+	if (!phy_info)
+		return;
+
+	fw_id = phy_info->attached.id;
+	sas_address = phy_info->attached.sas_address;
+
+	if (!phy_info->port_details) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+	rphy = mptsas_get_rphy(phy_info);
+	if (!rphy) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+
+	if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR
+		|| phy_info->attached.device_info
+			& MPI_SAS_DEVICE_INFO_SMP_INITIATOR
+		|| phy_info->attached.device_info
+			& MPI_SAS_DEVICE_INFO_STP_INITIATOR)
+		ds = "initiator";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET)
+		ds = "ssp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET)
+		ds = "stp";
+	if (phy_info->attached.device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+		ds = "sata";
+
+	dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT
+	    "removing %s device: fw_channel %d, fw_id %d, phy %d,"
+	    "sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel,
+	    phy_info->attached.id, phy_info->attached.phy_id,
+	    (unsigned long long) sas_address);
+
+	port = mptsas_get_port(phy_info);
+	if (!port) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, fw_id, __LINE__));
+		return;
+	}
+	port_info = phy_info->portinfo;
+	phy_info_parent = port_info->phy_info;
+	for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) {
+		if (!phy_info_parent->phy)
+			continue;
+		if (phy_info_parent->attached.sas_address !=
+		    sas_address)
+			continue;
+		dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev,
+		    MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n",
+		    ioc->name, phy_info_parent->phy_id,
+		    phy_info_parent->phy);
+		sas_port_delete_phy(port, phy_info_parent->phy);
+	}
+
+	dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
+	    "delete port %d, sas_addr (0x%llx)\n", ioc->name,
+	     port->port_identifier, (unsigned long long)sas_address);
+	sas_port_delete(port);
+	mptsas_set_port(ioc, phy_info, NULL);
+	mptsas_port_delete(ioc, phy_info->port_details);
+}
+
+struct mptsas_phyinfo *
+mptsas_refreshing_device_handles(MPT_ADAPTER *ioc,
+	struct mptsas_devinfo *sas_device)
+{
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo *port_info;
+	int i;
+
+	phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+	    sas_device->sas_address);
+	if (!phy_info)
+		goto out;
+	port_info = phy_info->portinfo;
+	if (!port_info)
+		goto out;
+	mutex_lock(&ioc->sas_topology_mutex);
+	for (i = 0; i < port_info->num_phys; i++) {
+		if (port_info->phy_info[i].attached.sas_address !=
+			sas_device->sas_address)
+			continue;
+		port_info->phy_info[i].attached.channel = sas_device->channel;
+		port_info->phy_info[i].attached.id = sas_device->id;
+		port_info->phy_info[i].attached.sas_address =
+		    sas_device->sas_address;
+		port_info->phy_info[i].attached.handle = sas_device->handle;
+		port_info->phy_info[i].attached.handle_parent =
+		    sas_device->handle_parent;
+		port_info->phy_info[i].attached.handle_enclosure =
+		    sas_device->handle_enclosure;
+	}
+	mutex_unlock(&ioc->sas_topology_mutex);
+ out:
+	return phy_info;
+}
+
+/**
+ * mptsas_firmware_event_work - work thread for processing fw events
+ * @work: work queue payload containing info describing the event
+ * Context: user
+ *
+ */
+static void
+mptsas_firmware_event_work(struct work_struct *work)
+{
+	struct fw_event_work *fw_event =
+		container_of(work, struct fw_event_work, work.work);
+	MPT_ADAPTER *ioc = fw_event->ioc;
+
+	/* special rescan topology handling */
+	if (fw_event->event == -1) {
+		if (ioc->in_rescan) {
+			devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+				"%s: rescan ignored as it is in progress\n",
+				ioc->name, __func__));
+			return;
+		}
+		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after "
+		    "reset\n", ioc->name, __func__));
+		ioc->in_rescan = 1;
+		mptsas_not_responding_devices(ioc);
+		mptsas_scan_sas_topology(ioc);
+		ioc->in_rescan = 0;
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	/* events handling turned off during host reset */
+	if (ioc->fw_events_off) {
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), "
+	    "event = (0x%02x)\n", ioc->name, __func__, fw_event,
+	    (fw_event->event & 0xFF)));
+
+	switch (fw_event->event) {
+	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		mptsas_send_sas_event(fw_event);
+		break;
+	case MPI_EVENT_INTEGRATED_RAID:
+		mptsas_send_raid_event(fw_event);
+		break;
+	case MPI_EVENT_IR2:
+		mptsas_send_ir2_event(fw_event);
+		break;
+	case MPI_EVENT_PERSISTENT_TABLE_FULL:
+		mptbase_sas_persist_operation(ioc,
+		    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
+		break;
+	case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+		mptsas_broadcast_primative_work(fw_event);
+		break;
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+		mptsas_send_expander_event(fw_event);
+		break;
+	case MPI_EVENT_SAS_PHY_LINK_STATUS:
+		mptsas_send_link_status_event(fw_event);
+		break;
+	case MPI_EVENT_QUEUE_FULL:
+		mptsas_handle_queue_full_event(fw_event);
+		break;
+	}
+}
+
+
+
 static int
 mptsas_slave_configure(struct scsi_device *sdev)
 {
+	struct Scsi_Host	*host = sdev->host;
+	MPT_SCSI_HOST	*hd = shost_priv(host);
+	MPT_ADAPTER	*ioc = hd->ioc;
+	VirtDevice	*vdevice = sdev->hostdata;
 
-	if (sdev->channel == MPTSAS_RAID_CHANNEL)
+	if (vdevice->vtarget->deleted) {
+		sdev_printk(KERN_INFO, sdev, "clearing deleted flag\n");
+		vdevice->vtarget->deleted = 0;
+	}
+
+	/*
+	 * RAID volumes placed beyond the last expected port.
+	 * Ignore sending sas mode pages in that case..
+	 */
+	if (sdev->channel == MPTSAS_RAID_CHANNEL) {
+		mptsas_add_device_component_starget_ir(ioc, scsi_target(sdev));
 		goto out;
+	}
 
 	sas_read_port_mode_page(sdev);
 
+	mptsas_add_device_component_starget(ioc, scsi_target(sdev));
+
  out:
 	return mptscsih_slave_configure(sdev);
 }
@@ -875,9 +1693,18 @@ mptsas_target_alloc(struct scsi_target *starget)
 	 * RAID volumes placed beyond the last expected port.
 	 */
 	if (starget->channel == MPTSAS_RAID_CHANNEL) {
-		for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
-			if (id == ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
-				channel = ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
+		if (!ioc->raid_data.pIocPg2) {
+			kfree(vtarget);
+			return -ENXIO;
+		}
+		for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+			if (id == ioc->raid_data.pIocPg2->
+					RaidVolume[i].VolumeID) {
+				channel = ioc->raid_data.pIocPg2->
+					RaidVolume[i].VolumeBus;
+			}
+		}
+		vtarget->raidVolume = 1;
 		goto out;
 	}
 
@@ -926,11 +1753,18 @@ mptsas_target_destroy(struct scsi_target *starget)
 	struct sas_rphy		*rphy;
 	struct mptsas_portinfo	*p;
 	int 			 i;
-	MPT_ADAPTER *ioc = hd->ioc;
+	MPT_ADAPTER	*ioc = hd->ioc;
+	VirtTarget	*vtarget;
 
 	if (!starget->hostdata)
 		return;
 
+	vtarget = starget->hostdata;
+
+	mptsas_del_device_component_by_os(ioc, starget->channel,
+	    starget->id);
+
+
 	if (starget->channel == MPTSAS_RAID_CHANNEL)
 		goto out;
 
@@ -940,12 +1774,21 @@ mptsas_target_destroy(struct scsi_target *starget)
 			if (p->phy_info[i].attached.sas_address !=
 					rphy->identify.sas_address)
 				continue;
+
+			starget_printk(KERN_INFO, starget, MYIOC_s_FMT
+			"delete device: fw_channel %d, fw_id %d, phy %d, "
+			"sas_addr 0x%llx\n", ioc->name,
+			p->phy_info[i].attached.channel,
+			p->phy_info[i].attached.id,
+			p->phy_info[i].attached.phy_id, (unsigned long long)
+			p->phy_info[i].attached.sas_address);
+
 			mptsas_set_starget(&p->phy_info[i], NULL);
-			goto out;
 		}
 	}
 
  out:
+	vtarget->starget = NULL;
 	kfree(starget->hostdata);
 	starget->hostdata = NULL;
 }
@@ -1008,6 +1851,8 @@ mptsas_slave_alloc(struct scsi_device *sdev)
 static int
 mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
+	MPT_SCSI_HOST	*hd;
+	MPT_ADAPTER	*ioc;
 	VirtDevice	*vdevice = SCpnt->device->hostdata;
 
 	if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) {
@@ -1016,6 +1861,12 @@ mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 		return 0;
 	}
 
+	hd = shost_priv(SCpnt->device->host);
+	ioc = hd->ioc;
+
+	if (ioc->sas_discovery_quiesce_io)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 //	scsi_print_command(SCpnt);
 
 	return mptscsih_qcmd(SCpnt,done);
@@ -1114,14 +1965,19 @@ static int mptsas_get_linkerrors(struct sas_phy *phy)
 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 		MPT_FRAME_HDR *reply)
 {
-	ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
+	ioc->sas_mgmt.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 	if (reply != NULL) {
-		ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
+		ioc->sas_mgmt.status |= MPT_MGMT_STATUS_RF_VALID;
 		memcpy(ioc->sas_mgmt.reply, reply,
 		    min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
 	}
-	complete(&ioc->sas_mgmt.done);
-	return 1;
+
+	if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+		ioc->sas_mgmt.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->sas_mgmt.done);
+		return 1;
+	}
+	return 0;
 }
 
 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
@@ -1160,6 +2016,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 		MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
 	req->PhyNum = phy->identify.phy_identifier;
 
+	INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
 	mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
@@ -1174,7 +2031,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 
 	/* a reply frame is expected */
 	if ((ioc->sas_mgmt.status &
-	    MPT_IOCTL_STATUS_RF_VALID) == 0) {
+	    MPT_MGMT_STATUS_RF_VALID) == 0) {
 		error = -ENXIO;
 		goto out_unlock;
 	}
@@ -1191,6 +2048,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 	error = 0;
 
  out_unlock:
+	CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
 	mutex_unlock(&ioc->sas_mgmt.mutex);
  out:
 	return error;
@@ -1277,8 +2135,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	/* do we need to support multiple segments? */
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
-		    ioc->name, __func__, req->bio->bi_vcnt, req->data_len,
-		    rsp->bio->bi_vcnt, rsp->data_len);
+		    ioc->name, __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
+		    rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
 		return -EINVAL;
 	}
 
@@ -1295,7 +2153,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	smpreq = (SmpPassthroughRequest_t *)mf;
 	memset(smpreq, 0, sizeof(*smpreq));
 
-	smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4);
+	smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
 	smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
 
 	if (rphy)
@@ -1304,7 +2162,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 		struct mptsas_portinfo *port_info;
 
 		mutex_lock(&ioc->sas_topology_mutex);
-		port_info = mptsas_get_hba_portinfo(ioc);
+		port_info = ioc->hba_port_info;
 		if (port_info && port_info->phy_info)
 			sas_address =
 				port_info->phy_info[0].phy->identify.sas_address;
@@ -1319,26 +2177,32 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	/* request */
 	flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 		       MPI_SGE_FLAGS_END_OF_BUFFER |
-		       MPI_SGE_FLAGS_DIRECTION |
-		       mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
-	flagsLength |= (req->data_len - 4);
+		       MPI_SGE_FLAGS_DIRECTION)
+		       << MPI_SGE_FLAGS_SHIFT;
+	flagsLength |= (blk_rq_bytes(req) - 4);
 
 	dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
-				      req->data_len, PCI_DMA_BIDIRECTIONAL);
+				      blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_out)
 		goto put_mf;
-	mpt_add_sge(psge, flagsLength, dma_addr_out);
-	psge += (sizeof(u32) + sizeof(dma_addr_t));
+	ioc->add_sge(psge, flagsLength, dma_addr_out);
+	psge += ioc->SGE_size;
 
 	/* response */
-	flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
-	flagsLength |= rsp->data_len + 4;
+	flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+		MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+		MPI_SGE_FLAGS_IOC_TO_HOST |
+		MPI_SGE_FLAGS_END_OF_BUFFER;
+
+	flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
+	flagsLength |= blk_rq_bytes(rsp) + 4;
 	dma_addr_in =  pci_map_single(ioc->pcidev, bio_data(rsp->bio),
-				      rsp->data_len, PCI_DMA_BIDIRECTIONAL);
+				      blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_in)
 		goto unmap;
-	mpt_add_sge(psge, flagsLength, dma_addr_in);
+	ioc->add_sge(psge, flagsLength, dma_addr_in);
 
+	INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
 	mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
@@ -1351,30 +2215,32 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	}
 	mf = NULL;
 
-	if (ioc->sas_mgmt.status & MPT_IOCTL_STATUS_RF_VALID) {
+	if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) {
 		SmpPassthroughReply_t *smprep;
 
 		smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
 		memcpy(req->sense, smprep, sizeof(*smprep));
 		req->sense_len = sizeof(*smprep);
-		req->data_len = 0;
-		rsp->data_len -= smprep->ResponseDataLength;
+		req->resid_len = 0;
+		rsp->resid_len -= smprep->ResponseDataLength;
 	} else {
-		printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
+		printk(MYIOC_s_ERR_FMT
+		    "%s: smp passthru reply failed to be returned\n",
 		    ioc->name, __func__);
 		ret = -ENXIO;
 	}
 unmap:
 	if (dma_addr_out)
-		pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len,
+		pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req),
 				 PCI_DMA_BIDIRECTIONAL);
 	if (dma_addr_in)
-		pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len,
+		pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp),
 				 PCI_DMA_BIDIRECTIONAL);
 put_mf:
 	if (mf)
 		mpt_free_msg_frame(ioc, mf);
 out_unlock:
+	CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
 	mutex_unlock(&ioc->sas_mgmt.mutex);
 out:
 	return ret;
@@ -1438,7 +2304,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 
 	port_info->num_phys = buffer->NumPhys;
 	port_info->phy_info = kcalloc(port_info->num_phys,
-		sizeof(*port_info->phy_info),GFP_KERNEL);
+		sizeof(struct mptsas_phyinfo), GFP_KERNEL);
 	if (!port_info->phy_info) {
 		error = -ENOMEM;
 		goto out_free_consistent;
@@ -1600,10 +2466,6 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 	__le64 sas_address;
 	int error=0;
 
-	if (ioc->sas_discovery_runtime &&
-		mptsas_is_end_device(device_info))
-			goto out;
-
 	hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 0;
@@ -1644,6 +2506,7 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 
 	mptsas_print_device_pg0(ioc, buffer);
 
+	memset(device_info, 0, sizeof(struct mptsas_devinfo));
 	device_info->handle = le16_to_cpu(buffer->DevHandle);
 	device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
 	device_info->handle_enclosure =
@@ -1675,7 +2538,9 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
 	SasExpanderPage0_t *buffer;
 	dma_addr_t dma_handle;
 	int i, error;
+	__le64 sas_address;
 
+	memset(port_info, 0, sizeof(struct mptsas_portinfo));
 	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 0;
@@ -1721,18 +2586,23 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
 	}
 
 	/* save config data */
-	port_info->num_phys = buffer->NumPhys;
+	port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1;
 	port_info->phy_info = kcalloc(port_info->num_phys,
-		sizeof(*port_info->phy_info),GFP_KERNEL);
+		sizeof(struct mptsas_phyinfo), GFP_KERNEL);
 	if (!port_info->phy_info) {
 		error = -ENOMEM;
 		goto out_free_consistent;
 	}
 
+	memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
 	for (i = 0; i < port_info->num_phys; i++) {
 		port_info->phy_info[i].portinfo = port_info;
 		port_info->phy_info[i].handle =
 		    le16_to_cpu(buffer->DevHandle);
+		port_info->phy_info[i].identify.sas_address =
+		    le64_to_cpu(sas_address);
+		port_info->phy_info[i].identify.handle_parent =
+		    le16_to_cpu(buffer->ParentDevHandle);
 	}
 
  out_free_consistent:
@@ -1752,11 +2622,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	dma_addr_t dma_handle;
 	int error=0;
 
-	if (ioc->sas_discovery_runtime &&
-		mptsas_is_end_device(&phy_info->attached))
-			goto out;
-
-	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
+	hdr.PageVersion = MPI_SASEXPANDER1_PAGEVERSION;
 	hdr.ExtPageLength = 0;
 	hdr.PageNumber = 1;
 	hdr.Reserved1 = 0;
@@ -1791,6 +2657,12 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 
 	error = mpt_config(ioc, &cfg);
+
+	if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+		error = -ENODEV;
+		goto out;
+	}
+
 	if (error)
 		goto out_free_consistent;
 
@@ -2010,16 +2882,21 @@ static int mptsas_probe_one_phy(struct device *dev,
 				goto out;
 			}
 			mptsas_set_port(ioc, phy_info, port);
-			dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			    "sas_port_alloc: port=%p dev=%p port_id=%d\n",
-			    ioc->name, port, dev, port->port_identifier));
+			devtprintk(ioc, dev_printk(KERN_DEBUG, &port->dev,
+			    MYIOC_s_FMT "add port %d, sas_addr (0x%llx)\n",
+			    ioc->name, port->port_identifier,
+			    (unsigned long long)phy_info->
+			    attached.sas_address));
 		}
-		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
-		    ioc->name, phy_info->phy_id));
+		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"sas_port_add_phy: phy_id=%d\n",
+			ioc->name, phy_info->phy_id));
 		sas_port_add_phy(port, phy_info->phy);
 		phy_info->sas_port_add_phy = 0;
+		devtprintk(ioc, dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+		    MYIOC_s_FMT "add phy %d, phy-obj (0x%p)\n", ioc->name,
+		     phy_info->phy_id, phy_info->phy));
 	}
-
 	if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
 
 		struct sas_rphy *rphy;
@@ -2032,18 +2909,17 @@ static int mptsas_probe_one_phy(struct device *dev,
 		 * the adding/removing of devices that occur
 		 * after start of day.
 		 */
-		if (ioc->sas_discovery_runtime &&
-			mptsas_is_end_device(&phy_info->attached))
-				goto out;
+		if (mptsas_is_end_device(&phy_info->attached) &&
+		    phy_info->attached.handle_parent) {
+			goto out;
+		}
 
 		mptsas_parse_device_info(&identify, &phy_info->attached);
 		if (scsi_is_host_device(parent)) {
 			struct mptsas_portinfo *port_info;
 			int i;
 
-			mutex_lock(&ioc->sas_topology_mutex);
-			port_info = mptsas_get_hba_portinfo(ioc);
-			mutex_unlock(&ioc->sas_topology_mutex);
+			port_info = ioc->hba_port_info;
 
 			for (i = 0; i < port_info->num_phys; i++)
 				if (port_info->phy_info[i].identify.sas_address ==
@@ -2102,7 +2978,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 	struct mptsas_portinfo *port_info, *hba;
 	int error = -ENOMEM, i;
 
-	hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
+	hba = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
 	if (! hba)
 		goto out;
 
@@ -2112,9 +2988,10 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 
 	mptsas_sas_io_unit_pg1(ioc);
 	mutex_lock(&ioc->sas_topology_mutex);
-	port_info = mptsas_get_hba_portinfo(ioc);
+	port_info = ioc->hba_port_info;
 	if (!port_info) {
-		port_info = hba;
+		ioc->hba_port_info = port_info = hba;
+		ioc->hba_port_num_phy = port_info->num_phys;
 		list_add_tail(&port_info->list, &ioc->sas_topology);
 	} else {
 		for (i = 0; i < hba->num_phys; i++) {
@@ -2130,15 +3007,22 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 		hba = NULL;
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
+#if defined(CPQ_CIM)
+	ioc->num_ports = port_info->num_phys;
+#endif
 	for (i = 0; i < port_info->num_phys; i++) {
 		mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
 			(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
 			 MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
-
+		port_info->phy_info[i].identify.handle =
+		    port_info->phy_info[i].handle;
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-			 port_info->phy_info[i].handle);
+			 port_info->phy_info[i].identify.handle);
+		if (!ioc->hba_port_sas_addr)
+			ioc->hba_port_sas_addr =
+			    port_info->phy_info[i].identify.sas_address;
 		port_info->phy_info[i].identify.phy_id =
 		    port_info->phy_info[i].phy_id = i;
 		if (port_info->phy_info[i].attached.handle)
@@ -2163,248 +3047,721 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
 	return error;
 }
 
-static int
-mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
+static void
+mptsas_expander_refresh(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 {
-	struct mptsas_portinfo *port_info, *p, *ex;
-	struct device *parent;
-	struct sas_rphy *rphy;
-	int error = -ENOMEM, i, j;
-
-	ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
-	if (!ex)
-		goto out;
-
-	error = mptsas_sas_expander_pg0(ioc, ex,
-	    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
-	     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
-	if (error)
-		goto out_free_port_info;
-
-	*handle = ex->phy_info[0].handle;
-
-	mutex_lock(&ioc->sas_topology_mutex);
-	port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
-	if (!port_info) {
-		port_info = ex;
-		list_add_tail(&port_info->list, &ioc->sas_topology);
-	} else {
-		for (i = 0; i < ex->num_phys; i++) {
-			port_info->phy_info[i].handle =
-				ex->phy_info[i].handle;
-			port_info->phy_info[i].port_id =
-				ex->phy_info[i].port_id;
-		}
-		kfree(ex->phy_info);
-		kfree(ex);
-		ex = NULL;
-	}
-	mutex_unlock(&ioc->sas_topology_mutex);
-
+	struct mptsas_portinfo *parent;
+	struct device *parent_dev;
+	struct sas_rphy	*rphy;
+	int		i;
+	u64		sas_address; /* expander sas address */
+	u32		handle;
+
+	handle = port_info->phy_info[0].handle;
+	sas_address = port_info->phy_info[0].identify.sas_address;
 	for (i = 0; i < port_info->num_phys; i++) {
 		mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
-			(MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
-			 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
-
-		if (port_info->phy_info[i].identify.handle) {
-			mptsas_sas_device_pg0(ioc,
-				&port_info->phy_info[i].identify,
-				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				port_info->phy_info[i].identify.handle);
-			port_info->phy_info[i].identify.phy_id =
-			    port_info->phy_info[i].phy_id;
-		}
+		    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
+		    MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + handle);
+
+		mptsas_sas_device_pg0(ioc,
+		    &port_info->phy_info[i].identify,
+		    (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+		    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    port_info->phy_info[i].identify.handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 
 		if (port_info->phy_info[i].attached.handle) {
 			mptsas_sas_device_pg0(ioc,
-				&port_info->phy_info[i].attached,
-				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				port_info->phy_info[i].attached.handle);
+			    &port_info->phy_info[i].attached,
+			    (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+			     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			    port_info->phy_info[i].attached.handle);
 			port_info->phy_info[i].attached.phy_id =
 			    port_info->phy_info[i].phy_id;
 		}
 	}
 
-	parent = &ioc->sh->shost_gendev;
-	for (i = 0; i < port_info->num_phys; i++) {
-		mutex_lock(&ioc->sas_topology_mutex);
-		list_for_each_entry(p, &ioc->sas_topology, list) {
-			for (j = 0; j < p->num_phys; j++) {
-				if (port_info->phy_info[i].identify.handle !=
-						p->phy_info[j].attached.handle)
-					continue;
-				rphy = mptsas_get_rphy(&p->phy_info[j]);
-				parent = &rphy->dev;
-			}
-		}
+	mutex_lock(&ioc->sas_topology_mutex);
+	parent = mptsas_find_portinfo_by_handle(ioc,
+	    port_info->phy_info[0].identify.handle_parent);
+	if (!parent) {
 		mutex_unlock(&ioc->sas_topology_mutex);
+		return;
 	}
+	for (i = 0, parent_dev = NULL; i < parent->num_phys && !parent_dev;
+	    i++) {
+		if (parent->phy_info[i].attached.sas_address == sas_address) {
+			rphy = mptsas_get_rphy(&parent->phy_info[i]);
+			parent_dev = &rphy->dev;
+		}
+	}
+	mutex_unlock(&ioc->sas_topology_mutex);
 
 	mptsas_setup_wide_ports(ioc, port_info);
-
 	for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
-		mptsas_probe_one_phy(parent, &port_info->phy_info[i],
+		mptsas_probe_one_phy(parent_dev, &port_info->phy_info[i],
 		    ioc->sas_index, 0);
+}
 
-	return 0;
+static void
+mptsas_expander_event_add(MPT_ADAPTER *ioc,
+    MpiEventDataSasExpanderStatusChange_t *expander_data)
+{
+	struct mptsas_portinfo *port_info;
+	int i;
+	__le64 sas_address;
 
- out_free_port_info:
-	if (ex) {
-		kfree(ex->phy_info);
-		kfree(ex);
+	port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+	if (!port_info)
+		BUG();
+	port_info->num_phys = (expander_data->NumPhys) ?
+	    expander_data->NumPhys : 1;
+	port_info->phy_info = kcalloc(port_info->num_phys,
+	    sizeof(struct mptsas_phyinfo), GFP_KERNEL);
+	if (!port_info->phy_info)
+		BUG();
+	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	for (i = 0; i < port_info->num_phys; i++) {
+		port_info->phy_info[i].portinfo = port_info;
+		port_info->phy_info[i].handle =
+		    le16_to_cpu(expander_data->DevHandle);
+		port_info->phy_info[i].identify.sas_address =
+		    le64_to_cpu(sas_address);
+		port_info->phy_info[i].identify.handle_parent =
+		    le16_to_cpu(expander_data->ParentDevHandle);
+	}
+
+	mutex_lock(&ioc->sas_topology_mutex);
+	list_add_tail(&port_info->list, &ioc->sas_topology);
+	mutex_unlock(&ioc->sas_topology_mutex);
+
+	printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)sas_address);
+
+	mptsas_expander_refresh(ioc, port_info);
+}
+
+/**
+ * mptsas_delete_expander_siblings - remove siblings attached to expander
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @parent: the parent port_info object
+ * @expander: the expander port_info object
+ **/
+static void
+mptsas_delete_expander_siblings(MPT_ADAPTER *ioc, struct mptsas_portinfo
+    *parent, struct mptsas_portinfo *expander)
+{
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo *port_info;
+	struct sas_rphy *rphy;
+	int i;
+
+	phy_info = expander->phy_info;
+	for (i = 0; i < expander->num_phys; i++, phy_info++) {
+		rphy = mptsas_get_rphy(phy_info);
+		if (!rphy)
+			continue;
+		if (rphy->identify.device_type == SAS_END_DEVICE)
+			mptsas_del_end_device(ioc, phy_info);
+	}
+
+	phy_info = expander->phy_info;
+	for (i = 0; i < expander->num_phys; i++, phy_info++) {
+		rphy = mptsas_get_rphy(phy_info);
+		if (!rphy)
+			continue;
+		if (rphy->identify.device_type ==
+		    MPI_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+		    rphy->identify.device_type ==
+		    MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+			port_info = mptsas_find_portinfo_by_sas_address(ioc,
+			    rphy->identify.sas_address);
+			if (!port_info)
+				continue;
+			if (port_info == parent) /* backlink rphy */
+				continue;
+			/*
+			Delete this expander even if the expdevpage is exists
+			because the parent expander is already deleted
+			*/
+			mptsas_expander_delete(ioc, port_info, 1);
+		}
+	}
+}
+
+
+/**
+ *	mptsas_expander_delete - remove this expander
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@port_info: expander port_info struct
+ *	@force: Flag to forcefully delete the expander
+ *
+ **/
+
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+		struct mptsas_portinfo *port_info, u8 force)
+{
+
+	struct mptsas_portinfo *parent;
+	int		i;
+	u64		expander_sas_address;
+	struct mptsas_phyinfo *phy_info;
+	struct mptsas_portinfo buffer;
+	struct mptsas_portinfo_details *port_details;
+	struct sas_port *port;
+
+	if (!port_info)
+		return;
+
+	/* see if expander is still there before deleting */
+	mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+	    MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
+	    port_info->phy_info[0].identify.handle);
+
+	if (buffer.num_phys) {
+		kfree(buffer.phy_info);
+		if (!force)
+			return;
+	}
+
+
+	/*
+	 * Obtain the port_info instance to the parent port
+	 */
+	port_details = NULL;
+	expander_sas_address =
+	    port_info->phy_info[0].identify.sas_address;
+	parent = mptsas_find_portinfo_by_handle(ioc,
+	    port_info->phy_info[0].identify.handle_parent);
+	mptsas_delete_expander_siblings(ioc, parent, port_info);
+	if (!parent)
+		goto out;
+
+	/*
+	 * Delete rphys in the parent that point
+	 * to this expander.
+	 */
+	phy_info = parent->phy_info;
+	port = NULL;
+	for (i = 0; i < parent->num_phys; i++, phy_info++) {
+		if (!phy_info->phy)
+			continue;
+		if (phy_info->attached.sas_address !=
+		    expander_sas_address)
+			continue;
+		if (!port) {
+			port = mptsas_get_port(phy_info);
+			port_details = phy_info->port_details;
+		}
+		dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+		    MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", ioc->name,
+		    phy_info->phy_id, phy_info->phy);
+		sas_port_delete_phy(port, phy_info->phy);
+	}
+	if (port) {
+		dev_printk(KERN_DEBUG, &port->dev,
+		    MYIOC_s_FMT "delete port %d, sas_addr (0x%llx)\n",
+		    ioc->name, port->port_identifier,
+		    (unsigned long long)expander_sas_address);
+		sas_port_delete(port);
+		mptsas_port_delete(ioc, port_details);
 	}
  out:
-	return error;
+
+	printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n",  ioc->name, port_info->num_phys,
+	    (unsigned long long)expander_sas_address);
+
+	/*
+	 * free link
+	 */
+	list_del(&port_info->list);
+	kfree(port_info->phy_info);
+	kfree(port_info);
 }
 
-/*
- * mptsas_delete_expander_phys
+
+/**
+ * mptsas_send_expander_event - expanders events
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @expander_data: event data
  *
  *
- * This will traverse topology, and remove expanders
- * that are no longer present
+ * This function handles adding, removing, and refreshing
+ * device handles within the expander objects.
  */
 static void
-mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
+mptsas_send_expander_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_portinfo buffer;
-	struct mptsas_portinfo *port_info, *n, *parent;
-	struct mptsas_phyinfo *phy_info;
-	struct sas_port * port;
+	MPT_ADAPTER *ioc;
+	MpiEventDataSasExpanderStatusChange_t *expander_data;
+	struct mptsas_portinfo *port_info;
+	__le64 sas_address;
 	int i;
-	u64	expander_sas_address;
 
+	ioc = fw_event->ioc;
+	expander_data = (MpiEventDataSasExpanderStatusChange_t *)
+	    fw_event->event_data;
+	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+
+	if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) {
+		if (port_info) {
+			for (i = 0; i < port_info->num_phys; i++) {
+				port_info->phy_info[i].portinfo = port_info;
+				port_info->phy_info[i].handle =
+				    le16_to_cpu(expander_data->DevHandle);
+				port_info->phy_info[i].identify.sas_address =
+				    le64_to_cpu(sas_address);
+				port_info->phy_info[i].identify.handle_parent =
+				    le16_to_cpu(expander_data->ParentDevHandle);
+			}
+			mptsas_expander_refresh(ioc, port_info);
+		} else if (!port_info && expander_data->NumPhys)
+			mptsas_expander_event_add(ioc, expander_data);
+	} else if (expander_data->ReasonCode ==
+	    MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING)
+		mptsas_expander_delete(ioc, port_info, 0);
+
+	mptsas_free_fw_event(ioc, fw_event);
+}
+
+
+/**
+ * mptsas_expander_add -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @handle:
+ *
+ */
+struct mptsas_portinfo *
+mptsas_expander_add(MPT_ADAPTER *ioc, u16 handle)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	int i;
+
+	if ((mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+	    MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)))
+		return NULL;
+
+	port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_ATOMIC);
+	if (!port_info) {
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+		"%s: exit at line=%d\n", ioc->name,
+		__func__, __LINE__));
+		return NULL;
+	}
+	port_info->num_phys = buffer.num_phys;
+	port_info->phy_info = buffer.phy_info;
+	for (i = 0; i < port_info->num_phys; i++)
+		port_info->phy_info[i].portinfo = port_info;
 	mutex_lock(&ioc->sas_topology_mutex);
-	list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
+	list_add_tail(&port_info->list, &ioc->sas_topology);
+	mutex_unlock(&ioc->sas_topology_mutex);
+	printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+	    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)buffer.phy_info[0].identify.sas_address);
+	mptsas_expander_refresh(ioc, port_info);
+	return port_info;
+}
 
-		if (!(port_info->phy_info[0].identify.device_info &
-		    MPI_SAS_DEVICE_INFO_SMP_TARGET))
+static void
+mptsas_send_link_status_event(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc;
+	MpiEventDataSasPhyLinkStatus_t *link_data;
+	struct mptsas_portinfo *port_info;
+	struct mptsas_phyinfo *phy_info = NULL;
+	__le64 sas_address;
+	u8 phy_num;
+	u8 link_rate;
+
+	ioc = fw_event->ioc;
+	link_data = (MpiEventDataSasPhyLinkStatus_t *)fw_event->event_data;
+
+	memcpy(&sas_address, &link_data->SASAddress, sizeof(__le64));
+	sas_address = le64_to_cpu(sas_address);
+	link_rate = link_data->LinkRates >> 4;
+	phy_num = link_data->PhyNum;
+
+	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+	if (port_info) {
+		phy_info = &port_info->phy_info[phy_num];
+		if (phy_info)
+			phy_info->negotiated_link_rate = link_rate;
+	}
+
+	if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
+	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+
+		if (!port_info) {
+			if (ioc->old_sas_discovery_protocal) {
+				port_info = mptsas_expander_add(ioc,
+					le16_to_cpu(link_data->DevHandle));
+				if (port_info)
+					goto out;
+			}
+			goto out;
+		}
+
+		if (port_info == ioc->hba_port_info)
+			mptsas_probe_hba_phys(ioc);
+		else
+			mptsas_expander_refresh(ioc, port_info);
+	} else if (phy_info && phy_info->phy) {
+		if (link_rate ==  MPI_SAS_IOUNIT0_RATE_PHY_DISABLED)
+			phy_info->phy->negotiated_linkrate =
+			    SAS_PHY_DISABLED;
+		else if (link_rate ==
+		    MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION)
+			phy_info->phy->negotiated_linkrate =
+			    SAS_LINK_RATE_FAILED;
+		else
+			phy_info->phy->negotiated_linkrate =
+			    SAS_LINK_RATE_UNKNOWN;
+	}
+ out:
+	mptsas_free_fw_event(ioc, fw_event);
+}
+
+static void
+mptsas_not_responding_devices(MPT_ADAPTER *ioc)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	struct mptsas_device_info	*sas_info;
+	struct mptsas_devinfo sas_device;
+	u32	handle;
+	VirtTarget *vtarget = NULL;
+	struct mptsas_phyinfo *phy_info;
+	u8 found_expander;
+	int retval, retry_count;
+	unsigned long flags;
+
+	mpt_findImVolumes(ioc);
+
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		   "%s: exiting due to a parallel reset \n", ioc->name,
+		    __func__));
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+	/* devices, logical volumes */
+	mutex_lock(&ioc->sas_device_info_mutex);
+ redo_device_scan:
+	list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) {
+		if (sas_info->is_cached)
 			continue;
+		if (!sas_info->is_logical_volume) {
+			sas_device.handle = 0;
+			retry_count = 0;
+retry_page:
+			retval = mptsas_sas_device_pg0(ioc, &sas_device,
+				(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID
+				<< MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+				(sas_info->fw.channel << 8) +
+				sas_info->fw.id);
+
+			if (sas_device.handle)
+				continue;
+			if (retval == -EBUSY) {
+				spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+				if (ioc->ioc_reset_in_progress) {
+					dfailprintk(ioc,
+					printk(MYIOC_s_DEBUG_FMT
+					"%s: exiting due to reset\n",
+					ioc->name, __func__));
+					spin_unlock_irqrestore
+					(&ioc->taskmgmt_lock, flags);
+					mutex_unlock(&ioc->
+					sas_device_info_mutex);
+					return;
+				}
+				spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+				flags);
+			}
 
-		if (mptsas_sas_expander_pg0(ioc, &buffer,
-		     (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
-		     MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
-		     port_info->phy_info[0].handle)) {
+			if (retval && (retval != -ENODEV)) {
+				if (retry_count < 10) {
+					retry_count++;
+					goto retry_page;
+				} else {
+					devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+					"%s: Config page retry exceeded retry "
+					"count deleting device 0x%llx\n",
+					ioc->name, __func__,
+					sas_info->sas_address));
+				}
+			}
 
-			/*
-			 * Obtain the port_info instance to the parent port
-			 */
-			parent = mptsas_find_portinfo_by_handle(ioc,
-			    port_info->phy_info[0].identify.handle_parent);
+			/* delete device */
+			vtarget = mptsas_find_vtarget(ioc,
+				sas_info->fw.channel, sas_info->fw.id);
 
-			if (!parent)
-				goto next_port;
+			if (vtarget)
+				vtarget->deleted = 1;
 
-			expander_sas_address =
-				port_info->phy_info[0].identify.sas_address;
+			phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+					sas_info->sas_address);
 
-			/*
-			 * Delete rphys in the parent that point
-			 * to this expander.  The transport layer will
-			 * cleanup all the children.
-			 */
-			phy_info = parent->phy_info;
-			for (i = 0; i < parent->num_phys; i++, phy_info++) {
-				port = mptsas_get_port(phy_info);
-				if (!port)
-					continue;
-				if (phy_info->attached.sas_address !=
-					expander_sas_address)
-					continue;
-				dsaswideprintk(ioc,
-				    dev_printk(KERN_DEBUG, &port->dev,
-				    MYIOC_s_FMT "delete port (%d)\n", ioc->name,
-				    port->port_identifier));
-				sas_port_delete(port);
-				mptsas_port_delete(ioc, phy_info->port_details);
+			if (phy_info) {
+				mptsas_del_end_device(ioc, phy_info);
+				goto redo_device_scan;
 			}
- next_port:
+		} else
+			mptsas_volume_delete(ioc, sas_info->fw.id);
+	}
+	mutex_lock(&ioc->sas_device_info_mutex);
 
-			phy_info = port_info->phy_info;
-			for (i = 0; i < port_info->num_phys; i++, phy_info++)
-				mptsas_port_delete(ioc, phy_info->port_details);
+	/* expanders */
+	mutex_lock(&ioc->sas_topology_mutex);
+ redo_expander_scan:
+	list_for_each_entry(port_info, &ioc->sas_topology, list) {
 
-			list_del(&port_info->list);
-			kfree(port_info->phy_info);
-			kfree(port_info);
+		if (port_info->phy_info &&
+		    (!(port_info->phy_info[0].identify.device_info &
+		    MPI_SAS_DEVICE_INFO_SMP_TARGET)))
+			continue;
+		found_expander = 0;
+		handle = 0xFFFF;
+		while (!mptsas_sas_expander_pg0(ioc, &buffer,
+		    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+		     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) &&
+		    !found_expander) {
+
+			handle = buffer.phy_info[0].handle;
+			if (buffer.phy_info[0].identify.sas_address ==
+			    port_info->phy_info[0].identify.sas_address) {
+				found_expander = 1;
+			}
+			kfree(buffer.phy_info);
+		}
+
+		if (!found_expander) {
+			mptsas_expander_delete(ioc, port_info, 0);
+			goto redo_expander_scan;
 		}
-		/*
-		* Free this memory allocated from inside
-		* mptsas_sas_expander_pg0
-		*/
-		kfree(buffer.phy_info);
 	}
-	mutex_unlock(&ioc->sas_topology_mutex);
+	mutex_lock(&ioc->sas_topology_mutex);
+}
+
+/**
+ *	mptsas_probe_expanders - adding expanders
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_probe_expanders(MPT_ADAPTER *ioc)
+{
+	struct mptsas_portinfo buffer, *port_info;
+	u32 			handle;
+	int i;
+
+	handle = 0xFFFF;
+	while (!mptsas_sas_expander_pg0(ioc, &buffer,
+	    (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+	     MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)) {
+
+		handle = buffer.phy_info[0].handle;
+		port_info = mptsas_find_portinfo_by_sas_address(ioc,
+		    buffer.phy_info[0].identify.sas_address);
+
+		if (port_info) {
+			/* refreshing handles */
+			for (i = 0; i < buffer.num_phys; i++) {
+				port_info->phy_info[i].handle = handle;
+				port_info->phy_info[i].identify.handle_parent =
+				    buffer.phy_info[0].identify.handle_parent;
+			}
+			mptsas_expander_refresh(ioc, port_info);
+			kfree(buffer.phy_info);
+			continue;
+		}
+
+		port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+		if (!port_info) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"%s: exit at line=%d\n", ioc->name,
+			__func__, __LINE__));
+			return;
+		}
+		port_info->num_phys = buffer.num_phys;
+		port_info->phy_info = buffer.phy_info;
+		for (i = 0; i < port_info->num_phys; i++)
+			port_info->phy_info[i].portinfo = port_info;
+		mutex_lock(&ioc->sas_topology_mutex);
+		list_add_tail(&port_info->list, &ioc->sas_topology);
+		mutex_unlock(&ioc->sas_topology_mutex);
+		printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+		    "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+	    (unsigned long long)buffer.phy_info[0].identify.sas_address);
+		mptsas_expander_refresh(ioc, port_info);
+	}
 }
 
-/*
- * Start of day discovery
- */
+static void
+mptsas_probe_devices(MPT_ADAPTER *ioc)
+{
+	u16 handle;
+	struct mptsas_devinfo sas_device;
+	struct mptsas_phyinfo *phy_info;
+
+	handle = 0xFFFF;
+	while (!(mptsas_sas_device_pg0(ioc, &sas_device,
+	    MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+
+		handle = sas_device.handle;
+
+		if ((sas_device.device_info &
+		     (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+		      MPI_SAS_DEVICE_INFO_STP_TARGET |
+		      MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0)
+			continue;
+
+		phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
+		if (!phy_info)
+			continue;
+
+		if (mptsas_get_rphy(phy_info))
+			continue;
+
+		mptsas_add_end_device(ioc, phy_info);
+	}
+}
+
+/**
+ *	mptsas_scan_sas_topology -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@sas_address:
+ *
+ **/
 static void
 mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
 {
-	u32 handle = 0xFFFF;
+	struct scsi_device *sdev;
 	int i;
 
-	mutex_lock(&ioc->sas_discovery_mutex);
 	mptsas_probe_hba_phys(ioc);
-	while (!mptsas_probe_expander_phys(ioc, &handle))
-		;
+	mptsas_probe_expanders(ioc);
+	mptsas_probe_devices(ioc);
+
 	/*
 	  Reporting RAID volumes.
 	*/
-	if (!ioc->ir_firmware)
-		goto out;
-	if (!ioc->raid_data.pIocPg2)
-		goto out;
-	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
-		goto out;
+	if (!ioc->ir_firmware || !ioc->raid_data.pIocPg2 ||
+	    !ioc->raid_data.pIocPg2->NumActiveVolumes)
+		return;
 	for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
+		if (sdev) {
+			scsi_device_put(sdev);
+			continue;
+		}
+		printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID);
 		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
 		    ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
 	}
- out:
-	mutex_unlock(&ioc->sas_discovery_mutex);
 }
 
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex UNLOCKED)
- */
+
 static void
-__mptsas_discovery_work(MPT_ADAPTER *ioc)
+mptsas_handle_queue_full_event(struct fw_event_work *fw_event)
 {
-	u32 handle = 0xFFFF;
+	MPT_ADAPTER *ioc;
+	EventDataQueueFull_t *qfull_data;
+	struct mptsas_device_info *sas_info;
+	struct scsi_device	*sdev;
+	int depth;
+	int id = -1;
+	int channel = -1;
+	int fw_id, fw_channel;
+	u16 current_depth;
+
+
+	ioc = fw_event->ioc;
+	qfull_data = (EventDataQueueFull_t *)fw_event->event_data;
+	fw_id = qfull_data->TargetID;
+	fw_channel = qfull_data->Bus;
+	current_depth = le16_to_cpu(qfull_data->CurrentDepth);
+
+	/* if hidden raid component, look for the volume id */
+	mutex_lock(&ioc->sas_device_info_mutex);
+	if (mptscsih_is_phys_disk(ioc, fw_channel, fw_id)) {
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (sas_info->is_cached ||
+			    sas_info->is_logical_volume)
+				continue;
+			if (sas_info->is_hidden_raid_component &&
+			    (sas_info->fw.channel == fw_channel &&
+			    sas_info->fw.id == fw_id)) {
+				id = sas_info->volume_id;
+				channel = MPTSAS_RAID_CHANNEL;
+				goto out;
+			}
+		}
+	} else {
+		list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+		    list) {
+			if (sas_info->is_cached ||
+			    sas_info->is_hidden_raid_component ||
+			    sas_info->is_logical_volume)
+				continue;
+			if (sas_info->fw.channel == fw_channel &&
+			    sas_info->fw.id == fw_id) {
+				id = sas_info->os.id;
+				channel = sas_info->os.channel;
+				goto out;
+			}
+		}
 
-	ioc->sas_discovery_runtime=1;
-	mptsas_delete_expander_phys(ioc);
-	mptsas_probe_hba_phys(ioc);
-	while (!mptsas_probe_expander_phys(ioc, &handle))
-		;
-	ioc->sas_discovery_runtime=0;
-}
+	}
 
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex LOCKED)
- */
-static void
-mptsas_discovery_work(struct work_struct *work)
-{
-	struct mptsas_discovery_event *ev =
-		container_of(work, struct mptsas_discovery_event, work);
-	MPT_ADAPTER *ioc = ev->ioc;
+ out:
+	mutex_unlock(&ioc->sas_device_info_mutex);
+
+	if (id != -1) {
+		shost_for_each_device(sdev, ioc->sh) {
+			if (sdev->id == id && sdev->channel == channel) {
+				if (current_depth > sdev->queue_depth) {
+					sdev_printk(KERN_INFO, sdev,
+					    "strange observation, the queue "
+					    "depth is (%d) meanwhile fw queue "
+					    "depth (%d)\n", sdev->queue_depth,
+					    current_depth);
+					continue;
+				}
+				depth = scsi_track_queue_full(sdev,
+				    current_depth - 1);
+				if (depth > 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Queue depth reduced to (%d)\n",
+					   depth);
+				else if (depth < 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Tagged Command Queueing is being "
+					"disabled\n");
+				else if (depth == 0)
+					sdev_printk(KERN_INFO, sdev,
+					"Queue depth not changed yet\n");
+			}
+		}
+	}
 
-	mutex_lock(&ioc->sas_discovery_mutex);
-	__mptsas_discovery_work(ioc);
-	mutex_unlock(&ioc->sas_discovery_mutex);
-	kfree(ev);
+	mptsas_free_fw_event(ioc, fw_event);
 }
 
+
 static struct mptsas_phyinfo *
 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
 {
@@ -2429,69 +3786,80 @@ mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
 	return phy_info;
 }
 
+/**
+ *	mptsas_find_phyinfo_by_phys_disk_num -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@phys_disk_num:
+ *	@channel:
+ *	@id:
+ *
+ **/
 static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
+mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 phys_disk_num,
+	u8 channel, u8 id)
 {
-	struct mptsas_portinfo *port_info;
 	struct mptsas_phyinfo *phy_info = NULL;
+	struct mptsas_portinfo *port_info;
+	RaidPhysDiskPage1_t *phys_disk = NULL;
+	int num_paths;
+	u64 sas_address = 0;
 	int i;
 
-	mutex_lock(&ioc->sas_topology_mutex);
-	list_for_each_entry(port_info, &ioc->sas_topology, list) {
-		for (i = 0; i < port_info->num_phys; i++) {
-			if (!mptsas_is_end_device(
-				&port_info->phy_info[i].attached))
-				continue;
-			if (port_info->phy_info[i].attached.id != id)
-				continue;
-			if (port_info->phy_info[i].attached.channel != channel)
-				continue;
-			phy_info = &port_info->phy_info[i];
-			break;
+	phy_info = NULL;
+	if (!ioc->raid_data.pIocPg3)
+		return NULL;
+	/* dual port support */
+	num_paths = mpt_raid_phys_disk_get_num_paths(ioc, phys_disk_num);
+	if (!num_paths)
+		goto out;
+	phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+	   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+	if (!phys_disk)
+		goto out;
+	mpt_raid_phys_disk_pg1(ioc, phys_disk_num, phys_disk);
+	for (i = 0; i < num_paths; i++) {
+		if ((phys_disk->Path[i].Flags & 1) != 0)
+			/* entry no longer valid */
+			continue;
+		if ((id == phys_disk->Path[i].PhysDiskID) &&
+		    (channel == phys_disk->Path[i].PhysDiskBus)) {
+			memcpy(&sas_address, &phys_disk->Path[i].WWID,
+				sizeof(u64));
+			phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+					sas_address);
+			goto out;
 		}
 	}
-	mutex_unlock(&ioc->sas_topology_mutex);
-	return phy_info;
-}
 
-static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
-{
-	struct mptsas_portinfo *port_info;
-	struct mptsas_phyinfo *phy_info = NULL;
-	int i;
+ out:
+	kfree(phys_disk);
+	if (phy_info)
+		return phy_info;
 
+	/*
+	 * Extra code to handle RAID0 case, where the sas_address is not updated
+	 * in phys_disk_page_1 when hotswapped
+	 */
 	mutex_lock(&ioc->sas_topology_mutex);
 	list_for_each_entry(port_info, &ioc->sas_topology, list) {
-		for (i = 0; i < port_info->num_phys; i++) {
+		for (i = 0; i < port_info->num_phys && !phy_info; i++) {
 			if (!mptsas_is_end_device(
 				&port_info->phy_info[i].attached))
 				continue;
 			if (port_info->phy_info[i].attached.phys_disk_num == ~0)
 				continue;
-			if (port_info->phy_info[i].attached.phys_disk_num != id)
-				continue;
-			if (port_info->phy_info[i].attached.channel != channel)
-				continue;
-			phy_info = &port_info->phy_info[i];
-			break;
+			if ((port_info->phy_info[i].attached.phys_disk_num ==
+			    phys_disk_num) &&
+			    (port_info->phy_info[i].attached.id == id) &&
+			    (port_info->phy_info[i].attached.channel ==
+			     channel))
+				phy_info = &port_info->phy_info[i];
 		}
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
 	return phy_info;
 }
 
-/*
- * Work queue thread to clear the persitency table
- */
-static void
-mptsas_persist_clear_table(struct work_struct *work)
-{
-	MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
-
-	mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
 static void
 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
 {
@@ -2517,7 +3885,8 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
 	pRaidVolumePage0_t		buffer = NULL;
 	RaidPhysDiskPage0_t 		phys_disk;
 	int				i;
-	struct mptsas_hotplug_event 	*ev;
+	struct mptsas_phyinfo	*phy_info;
+	struct mptsas_devinfo		sas_device;
 
 	memset(&cfg, 0 , sizeof(CONFIGPARMS));
 	memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
@@ -2557,20 +3926,16 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
 		    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
 			continue;
 
-		ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-		if (!ev) {
-			printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
-			goto out;
-		}
+		if (mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+			(phys_disk.PhysDiskBus << 8) +
+			phys_disk.PhysDiskID))
+			continue;
 
-		INIT_WORK(&ev->work, mptsas_hotplug_work);
-		ev->ioc = ioc;
-		ev->id = phys_disk.PhysDiskID;
-		ev->channel = phys_disk.PhysDiskBus;
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = phys_disk.PhysDiskNum;
-		ev->event_type = MPTSAS_ADD_DEVICE;
-		schedule_work(&ev->work);
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+		    sas_device.sas_address);
+		mptsas_add_end_device(ioc, phy_info);
 	}
 
  out:
@@ -2582,417 +3947,386 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
  * Work queue thread to handle SAS hotplug events
  */
 static void
-mptsas_hotplug_work(struct work_struct *work)
+mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    struct mptsas_hotplug_event *hot_plug_info)
 {
-	struct mptsas_hotplug_event *ev =
-		container_of(work, struct mptsas_hotplug_event, work);
-
-	MPT_ADAPTER *ioc = ev->ioc;
 	struct mptsas_phyinfo *phy_info;
-	struct sas_rphy *rphy;
-	struct sas_port *port;
-	struct scsi_device *sdev;
 	struct scsi_target * starget;
-	struct sas_identify identify;
-	char *ds = NULL;
 	struct mptsas_devinfo sas_device;
 	VirtTarget *vtarget;
-	VirtDevice *vdevice;
+	int i;
 
-	mutex_lock(&ioc->sas_discovery_mutex);
-	switch (ev->event_type) {
-	case MPTSAS_DEL_DEVICE:
+	switch (hot_plug_info->event_type) {
 
-		phy_info = NULL;
-		if (ev->phys_disk_num_valid) {
-			if (ev->hidden_raid_component){
-				if (mptsas_sas_device_pg0(ioc, &sas_device,
-				    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
-				     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-				    (ev->channel << 8) + ev->id)) {
-					dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-						__func__, __LINE__));
-					break;
-				}
-				phy_info = mptsas_find_phyinfo_by_sas_address(
-				    ioc, sas_device.sas_address);
-			}else
-				phy_info = mptsas_find_phyinfo_by_phys_disk_num(
-				    ioc, ev->channel, ev->phys_disk_num);
+	case MPTSAS_ADD_PHYSDISK:
+
+		if (!ioc->raid_data.pIocPg2)
+			break;
+
+		for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+			if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
+			    hot_plug_info->id) {
+				printk(MYIOC_s_WARN_FMT "firmware bug: unable "
+				    "to add hidden disk - target_id matchs "
+				    "volume_id\n", ioc->name);
+				mptsas_free_fw_event(ioc, fw_event);
+				return;
+			}
 		}
+		mpt_findImVolumes(ioc);
 
+	case MPTSAS_ADD_DEVICE:
+		memset(&sas_device, 0, sizeof(struct mptsas_devinfo));
+		mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    (hot_plug_info->channel << 8) +
+		    hot_plug_info->id);
+
+		if (!sas_device.handle)
+			return;
+
+		phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
 		if (!phy_info)
-			phy_info = mptsas_find_phyinfo_by_target(ioc,
-			    ev->channel, ev->id);
+			break;
 
-		/*
-		 * Sanity checks, for non-existing phys and remote rphys.
-		 */
-		if (!phy_info){
+		if (mptsas_get_rphy(phy_info))
+			break;
+
+		mptsas_add_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_DEL_DEVICE:
+		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+		    hot_plug_info->sas_address);
+		mptsas_del_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_DEL_PHYSDISK:
+
+		mpt_findImVolumes(ioc);
+
+		phy_info = mptsas_find_phyinfo_by_phys_disk_num(
+				ioc, hot_plug_info->phys_disk_num,
+				hot_plug_info->channel,
+				hot_plug_info->id);
+		mptsas_del_end_device(ioc, phy_info);
+		break;
+
+	case MPTSAS_ADD_PHYSDISK_REPROBE:
+
+		if (mptsas_sas_device_pg0(ioc, &sas_device,
+		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+		    (hot_plug_info->channel << 8) + hot_plug_info->id)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-				__func__, __LINE__));
+			"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		if (!phy_info->port_details) {
+
+		phy_info = mptsas_find_phyinfo_by_sas_address(
+		    ioc, sas_device.sas_address);
+
+		if (!phy_info) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		rphy = mptsas_get_rphy(phy_info);
-		if (!rphy) {
+
+		starget = mptsas_get_starget(phy_info);
+		if (!starget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		port = mptsas_get_port(phy_info);
-		if (!port) {
+		vtarget = starget->hostdata;
+		if (!vtarget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+				"%s: fw_id=%d exit at line=%d\n", ioc->name,
+				 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		starget = mptsas_get_starget(phy_info);
-		if (starget) {
-			vtarget = starget->hostdata;
+		mpt_findImVolumes(ioc);
 
-			if (!vtarget) {
-				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-					__func__, __LINE__));
-				break;
-			}
+		starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: "
+		    "fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+		    ioc->name, hot_plug_info->channel, hot_plug_info->id,
+		    hot_plug_info->phys_disk_num, (unsigned long long)
+		    sas_device.sas_address);
 
-			/*
-			 * Handling  RAID components
-			 */
-			if (ev->phys_disk_num_valid &&
-			    ev->hidden_raid_component) {
-				printk(MYIOC_s_INFO_FMT
-				    "RAID Hidding: channel=%d, id=%d, "
-				    "physdsk %d \n", ioc->name, ev->channel,
-				    ev->id, ev->phys_disk_num);
-				vtarget->id = ev->phys_disk_num;
-				vtarget->tflags |=
-				    MPT_TARGET_FLAGS_RAID_COMPONENT;
-				mptsas_reprobe_target(starget, 1);
-				phy_info->attached.phys_disk_num =
-				    ev->phys_disk_num;
-			break;
-			}
-		}
-
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SSP_TARGET)
-			ds = "ssp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "stp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "sata";
-
-		printk(MYIOC_s_INFO_FMT
-		       "removing %s device, channel %d, id %d, phy %d\n",
-		       ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
-		dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
-		    "delete port (%d)\n", ioc->name, port->port_identifier);
-		sas_port_delete(port);
-		mptsas_port_delete(ioc, phy_info->port_details);
+		vtarget->id = hot_plug_info->phys_disk_num;
+		vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+		phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num;
+		mptsas_reprobe_target(starget, 1);
 		break;
-	case MPTSAS_ADD_DEVICE:
 
-		if (ev->phys_disk_num_valid)
-			mpt_findImVolumes(ioc);
+	case MPTSAS_DEL_PHYSDISK_REPROBE:
 
-		/*
-		 * Refresh sas device pg0 data
-		 */
 		if (mptsas_sas_device_pg0(ioc, &sas_device,
 		    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
 		     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-			(ev->channel << 8) + ev->id)) {
+			(hot_plug_info->channel << 8) + hot_plug_info->id)) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-					"%s: exit at line=%d\n", ioc->name,
-					__func__, __LINE__));
+				    "%s: fw_id=%d exit at line=%d\n",
+				    ioc->name, __func__,
+				    hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		__mptsas_discovery_work(ioc);
-
 		phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
 				sas_device.sas_address);
-
-		if (!phy_info || !phy_info->port_details) {
+		if (!phy_info) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
 		starget = mptsas_get_starget(phy_info);
-		if (starget && (!ev->hidden_raid_component)){
-
-			vtarget = starget->hostdata;
-
-			if (!vtarget) {
-				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				    "%s: exit at line=%d\n", ioc->name,
-				    __func__, __LINE__));
-				break;
-			}
-			/*
-			 * Handling  RAID components
-			 */
-			if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
-				printk(MYIOC_s_INFO_FMT
-				    "RAID Exposing: channel=%d, id=%d, "
-				    "physdsk %d \n", ioc->name, ev->channel,
-				    ev->id, ev->phys_disk_num);
-				vtarget->tflags &=
-				    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
-				vtarget->id = ev->id;
-				mptsas_reprobe_target(starget, 0);
-				phy_info->attached.phys_disk_num = ~0;
-			}
+		if (!starget) {
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		if (mptsas_get_rphy(phy_info)) {
+		vtarget = starget->hostdata;
+		if (!vtarget) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			if (ev->channel) printk("%d\n", __LINE__);
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
 
-		port = mptsas_get_port(phy_info);
-		if (!port) {
+		if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
+			    "%s: fw_id=%d exit at line=%d\n", ioc->name,
+			 __func__, hot_plug_info->id, __LINE__));
 			break;
 		}
-		memcpy(&phy_info->attached, &sas_device,
-		    sizeof(struct mptsas_devinfo));
-
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SSP_TARGET)
-			ds = "ssp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "stp";
-		if (phy_info->attached.device_info &
-		    MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "sata";
-
-		printk(MYIOC_s_INFO_FMT
-		       "attaching %s device, channel %d, id %d, phy %d\n",
-		       ioc->name, ds, ev->channel, ev->id, ev->phy_id);
 
-		mptsas_parse_device_info(&identify, &phy_info->attached);
-		rphy = sas_end_device_alloc(port);
-		if (!rphy) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			break; /* non-fatal: an rphy can be added later */
-		}
+		mpt_findImVolumes(ioc);
 
-		rphy->identify = identify;
-		if (sas_rphy_add(rphy)) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-				"%s: exit at line=%d\n", ioc->name,
-			       	__func__, __LINE__));
-			sas_rphy_free(rphy);
-			break;
-		}
-		mptsas_set_rphy(ioc, phy_info, rphy);
+		starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:"
+		    " fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+		    ioc->name, hot_plug_info->channel, hot_plug_info->id,
+		    hot_plug_info->phys_disk_num, (unsigned long long)
+		    sas_device.sas_address);
+
+		vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+		vtarget->id = hot_plug_info->id;
+		phy_info->attached.phys_disk_num = ~0;
+		mptsas_reprobe_target(starget, 0);
+		mptsas_add_device_component_by_fw(ioc,
+		    hot_plug_info->channel, hot_plug_info->id);
 		break;
+
 	case MPTSAS_ADD_RAID:
-		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-		    ev->id, 0);
-		if (sdev) {
-			scsi_device_put(sdev);
-			break;
-		}
-		printk(MYIOC_s_INFO_FMT
-		       "attaching raid volume, channel %d, id %d\n",
-		       ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
+
 		mpt_findImVolumes(ioc);
+		printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id);
+		scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id, 0);
 		break;
+
 	case MPTSAS_DEL_RAID:
-		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-		    ev->id, 0);
-		if (!sdev)
-			break;
-		printk(MYIOC_s_INFO_FMT
-		       "removing raid volume, channel %d, id %d\n",
-		       ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-		vdevice = sdev->hostdata;
-		scsi_remove_device(sdev);
-		scsi_device_put(sdev);
+
 		mpt_findImVolumes(ioc);
+		printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+		    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info->id);
+		scsi_remove_device(hot_plug_info->sdev);
+		scsi_device_put(hot_plug_info->sdev);
 		break;
+
 	case MPTSAS_ADD_INACTIVE_VOLUME:
+
+		mpt_findImVolumes(ioc);
 		mptsas_adding_inactive_raid_components(ioc,
-		    ev->channel, ev->id);
+		    hot_plug_info->channel, hot_plug_info->id);
 		break;
-	case MPTSAS_IGNORE_EVENT:
+
 	default:
 		break;
 	}
 
-	mutex_unlock(&ioc->sas_discovery_mutex);
-	kfree(ev);
+	mptsas_free_fw_event(ioc, fw_event);
 }
 
 static void
-mptsas_send_sas_event(MPT_ADAPTER *ioc,
-		EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
+mptsas_send_sas_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-	u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-	__le64 sas_address;
+	MPT_ADAPTER *ioc;
+	struct mptsas_hotplug_event hot_plug_info;
+	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
+	u32 device_info;
+	u64 sas_address;
+
+	ioc = fw_event->ioc;
+	sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)
+	    fw_event->event_data;
+	device_info = le32_to_cpu(sas_event_data->DeviceInfo);
 
 	if ((device_info &
-	     (MPI_SAS_DEVICE_INFO_SSP_TARGET |
-	      MPI_SAS_DEVICE_INFO_STP_TARGET |
-	      MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
+		(MPI_SAS_DEVICE_INFO_SSP_TARGET |
+		MPI_SAS_DEVICE_INFO_STP_TARGET |
+		MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) {
+		mptsas_free_fw_event(ioc, fw_event);
+		return;
+	}
+
+	if (sas_event_data->ReasonCode ==
+		MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) {
+		mptbase_sas_persist_operation(ioc,
+		MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
 		return;
+	}
 
 	switch (sas_event_data->ReasonCode) {
 	case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-
-		mptsas_target_reset_queue(ioc, sas_event_data);
-		break;
-
 	case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-		ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-		if (!ev) {
-			printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-			break;
-		}
-
-		INIT_WORK(&ev->work, mptsas_hotplug_work);
-		ev->ioc = ioc;
-		ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-		ev->parent_handle =
-		    le16_to_cpu(sas_event_data->ParentDevHandle);
-		ev->channel = sas_event_data->Bus;
-		ev->id = sas_event_data->TargetID;
-		ev->phy_id = sas_event_data->PhyNum;
+		memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+		hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle);
+		hot_plug_info.channel = sas_event_data->Bus;
+		hot_plug_info.id = sas_event_data->TargetID;
+		hot_plug_info.phy_id = sas_event_data->PhyNum;
 		memcpy(&sas_address, &sas_event_data->SASAddress,
-		    sizeof(__le64));
-		ev->sas_address = le64_to_cpu(sas_address);
-		ev->device_info = device_info;
-
+		    sizeof(u64));
+		hot_plug_info.sas_address = le64_to_cpu(sas_address);
+		hot_plug_info.device_info = device_info;
 		if (sas_event_data->ReasonCode &
 		    MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
-			ev->event_type = MPTSAS_ADD_DEVICE;
+			hot_plug_info.event_type = MPTSAS_ADD_DEVICE;
 		else
-			ev->event_type = MPTSAS_DEL_DEVICE;
-		schedule_work(&ev->work);
+			hot_plug_info.event_type = MPTSAS_DEL_DEVICE;
+		mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
 		break;
+
 	case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-	/*
-	 * Persistent table is full.
-	 */
-		INIT_WORK(&ioc->sas_persist_task,
-		    mptsas_persist_clear_table);
-		schedule_work(&ioc->sas_persist_task);
+		mptbase_sas_persist_operation(ioc,
+		    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+		mptsas_free_fw_event(ioc, fw_event);
 		break;
-	/*
-	 * TODO, handle other events
-	 */
+
 	case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-	case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+	/* TODO */
 	case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
-	case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
-	case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+	/* TODO */
 	default:
+		mptsas_free_fw_event(ioc, fw_event);
 		break;
 	}
 }
+
 static void
-mptsas_send_raid_event(MPT_ADAPTER *ioc,
-		EVENT_DATA_RAID *raid_event_data)
+mptsas_send_raid_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-	int status = le32_to_cpu(raid_event_data->SettingsStatus);
-	int state = (status >> 8) & 0xff;
-
-	if (ioc->bus_type != SAS)
-		return;
-
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev) {
-		printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-		return;
+	MPT_ADAPTER *ioc;
+	EVENT_DATA_RAID *raid_event_data;
+	struct mptsas_hotplug_event hot_plug_info;
+	int status;
+	int state;
+	struct scsi_device *sdev = NULL;
+	VirtDevice *vdevice = NULL;
+	RaidPhysDiskPage0_t phys_disk;
+
+	ioc = fw_event->ioc;
+	raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data;
+	status = le32_to_cpu(raid_event_data->SettingsStatus);
+	state = (status >> 8) & 0xff;
+
+	memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+	hot_plug_info.id = raid_event_data->VolumeID;
+	hot_plug_info.channel = raid_event_data->VolumeBus;
+	hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum;
+
+	if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED ||
+	    raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED ||
+	    raid_event_data->ReasonCode ==
+	    MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) {
+		sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+		    hot_plug_info.id, 0);
+		hot_plug_info.sdev = sdev;
+		if (sdev)
+			vdevice = sdev->hostdata;
 	}
 
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->id = raid_event_data->VolumeID;
-	ev->channel = raid_event_data->VolumeBus;
-	ev->event_type = MPTSAS_IGNORE_EVENT;
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+	    "ReasonCode=%02x\n", ioc->name, __func__,
+	    raid_event_data->ReasonCode));
 
 	switch (raid_event_data->ReasonCode) {
 	case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = raid_event_data->PhysDiskNum;
-		ev->event_type = MPTSAS_ADD_DEVICE;
+		hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE;
 		break;
 	case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
-		ev->phys_disk_num_valid = 1;
-		ev->phys_disk_num = raid_event_data->PhysDiskNum;
-		ev->hidden_raid_component = 1;
-		ev->event_type = MPTSAS_DEL_DEVICE;
+		hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE;
 		break;
 	case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
 		switch (state) {
 		case MPI_PD_STATE_ONLINE:
 		case MPI_PD_STATE_NOT_COMPATIBLE:
-			ev->phys_disk_num_valid = 1;
-			ev->phys_disk_num = raid_event_data->PhysDiskNum;
-			ev->hidden_raid_component = 1;
-			ev->event_type = MPTSAS_ADD_DEVICE;
+			mpt_raid_phys_disk_pg0(ioc,
+			    raid_event_data->PhysDiskNum, &phys_disk);
+			hot_plug_info.id = phys_disk.PhysDiskID;
+			hot_plug_info.channel = phys_disk.PhysDiskBus;
+			hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
 			break;
+		case MPI_PD_STATE_FAILED:
 		case MPI_PD_STATE_MISSING:
 		case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
 		case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
 		case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
-			ev->phys_disk_num_valid = 1;
-			ev->phys_disk_num = raid_event_data->PhysDiskNum;
-			ev->event_type = MPTSAS_DEL_DEVICE;
+			hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
 			break;
 		default:
 			break;
 		}
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_DELETED:
-		ev->event_type = MPTSAS_DEL_RAID;
+		if (!sdev)
+			break;
+		vdevice->vtarget->deleted = 1; /* block IO */
+		hot_plug_info.event_type = MPTSAS_DEL_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_CREATED:
-		ev->event_type = MPTSAS_ADD_RAID;
+		if (sdev) {
+			scsi_device_put(sdev);
+			break;
+		}
+		hot_plug_info.event_type = MPTSAS_ADD_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+		if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) {
+			if (!sdev)
+				break;
+			vdevice->vtarget->deleted = 1; /* block IO */
+			hot_plug_info.event_type = MPTSAS_DEL_RAID;
+			break;
+		}
 		switch (state) {
 		case MPI_RAIDVOL0_STATUS_STATE_FAILED:
 		case MPI_RAIDVOL0_STATUS_STATE_MISSING:
-			ev->event_type = MPTSAS_DEL_RAID;
+			if (!sdev)
+				break;
+			vdevice->vtarget->deleted = 1; /* block IO */
+			hot_plug_info.event_type = MPTSAS_DEL_RAID;
 			break;
 		case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
 		case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
-			ev->event_type = MPTSAS_ADD_RAID;
+			if (sdev) {
+				scsi_device_put(sdev);
+				break;
+			}
+			hot_plug_info.event_type = MPTSAS_ADD_RAID;
 			break;
 		default:
 			break;
@@ -3001,32 +4335,188 @@ mptsas_send_raid_event(MPT_ADAPTER *ioc,
 	default:
 		break;
 	}
-	schedule_work(&ev->work);
+
+	if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT)
+		mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+	else
+		mptsas_free_fw_event(ioc, fw_event);
 }
 
-static void
-mptsas_send_discovery_event(MPT_ADAPTER *ioc,
-	EVENT_DATA_SAS_DISCOVERY *discovery_data)
+/**
+ *	mptsas_issue_tm - send mptsas internal tm request
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@type: Task Management type
+ *	@channel: channel number for task management
+ *	@id: Logical Target ID for reset (if appropriate)
+ *	@lun: Logical unit for reset (if appropriate)
+ *	@task_context: Context for the task to be aborted
+ *	@timeout: timeout for task management control
+ *
+ *	return 0 on success and -1 on failure:
+ *
+ */
+static int
+mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
+	int task_context, ulong timeout, u8 *issue_reset)
 {
-	struct mptsas_discovery_event *ev;
+	MPT_FRAME_HDR	*mf;
+	SCSITaskMgmt_t	*pScsiTm;
+	int		 retval;
+	unsigned long	 timeleft;
+
+	*issue_reset = 0;
+	mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+	if (mf == NULL) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no "
+		    "msg frames!!\n", ioc->name));
+		goto out;
+	}
 
-	/*
-	 * DiscoveryStatus
-	 *
-	 * This flag will be non-zero when firmware
-	 * kicks off discovery, and return to zero
-	 * once its completed.
-	 */
-	if (discovery_data->DiscoveryStatus)
-		return;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, "
+	    "task_type = 0x%02X,\n\t timeout = %ld, fw_channel = %d, "
+	    "fw_id = %d, lun = %lld,\n\t task_context = 0x%x\n", ioc->name, mf,
+	     type, timeout, channel, id, (unsigned long long)lun,
+	     task_context));
+
+	pScsiTm = (SCSITaskMgmt_t *) mf;
+	memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
+	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
+	pScsiTm->TaskType = type;
+	pScsiTm->MsgFlags = 0;
+	pScsiTm->TargetID = id;
+	pScsiTm->Bus = channel;
+	pScsiTm->ChainOffset = 0;
+	pScsiTm->Reserved = 0;
+	pScsiTm->Reserved1 = 0;
+	pScsiTm->TaskMsgContext = task_context;
+	int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
+
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	retval = 0;
+	mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
+
+	/* Now wait for the command to complete */
+	timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+		    "TaskMgmt request: TIMED OUT!(mr=%p)\n", ioc->name, mf));
+		mpt_free_msg_frame(ioc, mf);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		*issue_reset = 1;
+		goto out;
+	}
 
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		retval = -1; /* return failure */
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "TaskMgmt request: failed with no reply\n", ioc->name));
+		goto out;
+	}
+
+ out:
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	return retval;
+}
+
+/**
+ *	mptsas_broadcast_primative_work - Handle broadcast primitives
+ *	@work: work queue payload containing info describing the event
+ *
+ *	this will be handled in workqueue context.
+ */
+static void
+mptsas_broadcast_primative_work(struct fw_event_work *fw_event)
+{
+	MPT_ADAPTER *ioc = fw_event->ioc;
+	MPT_FRAME_HDR	*mf;
+	VirtDevice	*vdevice;
+	int			ii;
+	struct scsi_cmnd	*sc;
+	SCSITaskMgmtReply_t	*pScsiTmReply;
+	u8			issue_reset;
+	int			task_context;
+	u8			channel, id;
+	int			 lun;
+	u32			 termination_count;
+	u32			 query_count;
+
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s - enter\n", ioc->name, __func__));
+
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+		mptsas_requeue_fw_event(ioc, fw_event, 1000);
 		return;
-	INIT_WORK(&ev->work, mptsas_discovery_work);
-	ev->ioc = ioc;
-	schedule_work(&ev->work);
-};
+	}
+
+	issue_reset = 0;
+	termination_count = 0;
+	query_count = 0;
+	mpt_findImVolumes(ioc);
+	pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+
+	for (ii = 0; ii < ioc->req_depth; ii++) {
+		if (ioc->fw_events_off)
+			goto out;
+		sc = mptscsih_get_scsi_lookup(ioc, ii);
+		if (!sc)
+			continue;
+		mf = MPT_INDEX_2_MFPTR(ioc, ii);
+		if (!mf)
+			continue;
+		task_context = mf->u.frame.hwhdr.msgctxu.MsgContext;
+		vdevice = sc->device->hostdata;
+		if (!vdevice || !vdevice->vtarget)
+			continue;
+		if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+			continue; /* skip hidden raid components */
+		if (vdevice->vtarget->raidVolume)
+			continue; /* skip hidden raid components */
+		channel = vdevice->vtarget->channel;
+		id = vdevice->vtarget->id;
+		lun = vdevice->lun;
+		if (mptsas_issue_tm(ioc, MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK,
+		    channel, id, (u64)lun, task_context, 30, &issue_reset))
+			goto out;
+		query_count++;
+		termination_count +=
+		    le32_to_cpu(pScsiTmReply->TerminationCount);
+		if ((pScsiTmReply->IOCStatus == MPI_IOCSTATUS_SUCCESS) &&
+		    (pScsiTmReply->ResponseCode ==
+		    MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+		    pScsiTmReply->ResponseCode ==
+		    MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+			continue;
+		if (mptsas_issue_tm(ioc,
+		    MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET,
+		    channel, id, (u64)lun, 0, 30, &issue_reset))
+			goto out;
+		termination_count +=
+		    le32_to_cpu(pScsiTmReply->TerminationCount);
+	}
+
+ out:
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s - exit, query_count = %d termination_count = %d\n",
+	    ioc->name, __func__, query_count, termination_count));
+
+	ioc->broadcast_aen_busy = 0;
+	mpt_clear_taskmgmt_in_progress_flag(ioc);
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+	if (issue_reset) {
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+		    ioc->name, __func__);
+		mpt_HardResetHandler(ioc, CAN_SLEEP);
+	}
+	mptsas_free_fw_event(ioc, fw_event);
+}
 
 /*
  * mptsas_send_ir2_event - handle exposing hidden disk when
@@ -3037,76 +4527,159 @@ mptsas_send_discovery_event(MPT_ADAPTER *ioc,
  *
  */
 static void
-mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
+mptsas_send_ir2_event(struct fw_event_work *fw_event)
 {
-	struct mptsas_hotplug_event *ev;
-
-	if (ir2_data->ReasonCode !=
-	    MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
-		return;
-
-	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-	if (!ev)
+	MPT_ADAPTER	*ioc;
+	struct mptsas_hotplug_event hot_plug_info;
+	MPI_EVENT_DATA_IR2	*ir2_data;
+	u8 reasonCode;
+	RaidPhysDiskPage0_t phys_disk;
+
+	ioc = fw_event->ioc;
+	ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data;
+	reasonCode = ir2_data->ReasonCode;
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+	    "ReasonCode=%02x\n", ioc->name, __func__, reasonCode));
+
+	memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+	hot_plug_info.id = ir2_data->TargetID;
+	hot_plug_info.channel = ir2_data->Bus;
+	switch (reasonCode) {
+	case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+		hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME;
+		break;
+	case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+		hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+		hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
+		break;
+	case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+		hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+		mpt_raid_phys_disk_pg0(ioc,
+		    ir2_data->PhysDiskNum, &phys_disk);
+		hot_plug_info.id = phys_disk.PhysDiskID;
+		hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
+		break;
+	default:
+		mptsas_free_fw_event(ioc, fw_event);
 		return;
-
-	INIT_WORK(&ev->work, mptsas_hotplug_work);
-	ev->ioc = ioc;
-	ev->id = ir2_data->TargetID;
-	ev->channel = ir2_data->Bus;
-	ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
-
-	schedule_work(&ev->work);
-};
+	}
+	mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+}
 
 static int
 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 {
-	int rc=1;
-	u8 event = le32_to_cpu(reply->Event) & 0xFF;
+	u32 event = le32_to_cpu(reply->Event);
+	int sz, event_data_sz;
+	struct fw_event_work *fw_event;
+	unsigned long delay;
 
-	if (!ioc->sh)
-		goto out;
-
-	/*
-	 * sas_discovery_ignore_events
-	 *
-	 * This flag is to prevent anymore processing of
-	 * sas events once mptsas_remove function is called.
-	 */
-	if (ioc->sas_discovery_ignore_events) {
-		rc = mptscsih_event_process(ioc, reply);
-		goto out;
-	}
+	/* events turned off due to host reset or driver unloading */
+	if (ioc->fw_events_off)
+		return 0;
 
+	delay = msecs_to_jiffies(1);
 	switch (event) {
+	case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+	{
+		EVENT_DATA_SAS_BROADCAST_PRIMITIVE *broadcast_event_data =
+		    (EVENT_DATA_SAS_BROADCAST_PRIMITIVE *)reply->Data;
+		if (broadcast_event_data->Primitive !=
+		    MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+			return 0;
+		if (ioc->broadcast_aen_busy)
+			return 0;
+		ioc->broadcast_aen_busy = 1;
+		break;
+	}
 	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
-		mptsas_send_sas_event(ioc,
-			(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
+	{
+		EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data =
+		    (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data;
+
+		if (sas_event_data->ReasonCode ==
+		    MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) {
+			mptsas_target_reset_queue(ioc, sas_event_data);
+			return 0;
+		}
 		break;
-	case MPI_EVENT_INTEGRATED_RAID:
-		mptsas_send_raid_event(ioc,
-			(EVENT_DATA_RAID *)reply->Data);
+	}
+	case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+	{
+		MpiEventDataSasExpanderStatusChange_t *expander_data =
+		    (MpiEventDataSasExpanderStatusChange_t *)reply->Data;
+
+		if (ioc->old_sas_discovery_protocal)
+			return 0;
+
+		if (expander_data->ReasonCode ==
+		    MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING &&
+		    ioc->device_missing_delay)
+			delay = HZ * ioc->device_missing_delay;
 		break;
+	}
+	case MPI_EVENT_SAS_DISCOVERY:
+	{
+		u32 discovery_status;
+		EventDataSasDiscovery_t *discovery_data =
+		    (EventDataSasDiscovery_t *)reply->Data;
+
+		discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus);
+		ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0;
+		if (ioc->old_sas_discovery_protocal && !discovery_status)
+			mptsas_queue_rescan(ioc);
+		return 0;
+	}
+	case MPI_EVENT_INTEGRATED_RAID:
 	case MPI_EVENT_PERSISTENT_TABLE_FULL:
-		INIT_WORK(&ioc->sas_persist_task,
-		    mptsas_persist_clear_table);
-		schedule_work(&ioc->sas_persist_task);
-		break;
-	 case MPI_EVENT_SAS_DISCOVERY:
-		mptsas_send_discovery_event(ioc,
-			(EVENT_DATA_SAS_DISCOVERY *)reply->Data);
-		break;
 	case MPI_EVENT_IR2:
-		mptsas_send_ir2_event(ioc,
-		    (PTR_MPI_EVENT_DATA_IR2)reply->Data);
+	case MPI_EVENT_SAS_PHY_LINK_STATUS:
+	case MPI_EVENT_QUEUE_FULL:
 		break;
 	default:
-		rc = mptscsih_event_process(ioc, reply);
-		break;
+		return 0;
 	}
- out:
 
-	return rc;
+	event_data_sz = ((reply->MsgLength * 4) -
+	    offsetof(EventNotificationReply_t, Data));
+	sz = offsetof(struct fw_event_work, event_data) + event_data_sz;
+	fw_event = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event) {
+		printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name,
+		 __func__, __LINE__);
+		return 0;
+	}
+	memcpy(fw_event->event_data, reply->Data, event_data_sz);
+	fw_event->event = event;
+	fw_event->ioc = ioc;
+	mptsas_add_fw_event(ioc, fw_event, delay);
+	return 0;
+}
+
+/* Delete a volume when no longer listed in ioc pg2
+ */
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id)
+{
+	struct scsi_device *sdev;
+	int i;
+
+	sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, id, 0);
+	if (!sdev)
+		return;
+	if (!ioc->raid_data.pIocPg2)
+		goto out;
+	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
+		goto out;
+	for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
+		if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id)
+			goto release_sdev;
+ out:
+	printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+	    "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, id);
+	scsi_remove_device(sdev);
+ release_sdev:
+	scsi_device_put(sdev);
 }
 
 static int
@@ -3128,6 +4701,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return r;
 
 	ioc = pci_get_drvdata(pdev);
+	mptsas_fw_event_off(ioc);
 	ioc->DoneCtx = mptsasDoneCtx;
 	ioc->TaskCtx = mptsasTaskCtx;
 	ioc->InternalCtx = mptsasInternalCtx;
@@ -3211,17 +4785,15 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -3251,9 +4823,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -3273,10 +4842,11 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ioc->sas_data.ptClear = mpt_pt_clear;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 	INIT_LIST_HEAD(&hd->target_reset_list);
+	INIT_LIST_HEAD(&ioc->sas_device_info_list);
+	mutex_init(&ioc->sas_device_info_mutex);
+
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
 	if (ioc->sas_data.ptClear==1) {
@@ -3291,8 +4861,11 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_mptsas_probe;
 	}
 
+	/* older firmware doesn't support expander events */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xE)
+		ioc->old_sas_discovery_protocal = 1;
 	mptsas_scan_sas_topology(ioc);
-
+	mptsas_fw_event_on(ioc);
 	return 0;
 
  out_mptsas_probe:
@@ -3301,12 +4874,25 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+void
+mptsas_shutdown(struct pci_dev *pdev)
+{
+	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+	mptsas_fw_event_off(ioc);
+	mptsas_cleanup_fw_event_q(ioc);
+}
+
 static void __devexit mptsas_remove(struct pci_dev *pdev)
 {
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	struct mptsas_portinfo *p, *n;
 	int i;
 
+	mptsas_shutdown(pdev);
+
+	mptsas_del_device_components(ioc);
+
 	ioc->sas_discovery_ignore_events = 1;
 	sas_remove_host(ioc->sh);
 
@@ -3315,11 +4901,12 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
 		list_del(&p->list);
 		for (i = 0 ; i < p->num_phys ; i++)
 			mptsas_port_delete(ioc, p->phy_info[i].port_details);
+
 		kfree(p->phy_info);
 		kfree(p);
 	}
 	mutex_unlock(&ioc->sas_topology_mutex);
-
+	ioc->hba_port_info = NULL;
 	mptscsih_remove(pdev);
 }
 
@@ -3344,7 +4931,7 @@ static struct pci_driver mptsas_driver = {
 	.id_table	= mptsas_pci_table,
 	.probe		= mptsas_probe,
 	.remove		= __devexit_p(mptsas_remove),
-	.shutdown	= mptscsih_shutdown,
+	.shutdown	= mptsas_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
@@ -3364,10 +4951,12 @@ mptsas_init(void)
 		return -ENODEV;
 
 	mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
-	mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
+	mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
 	mptsasInternalCtx =
 		mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
 	mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
+	mptsasDeviceResetCtx =
+		mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
 
 	mpt_event_register(mptsasDoneCtx, mptsas_event_process);
 	mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset);
@@ -3392,6 +4981,7 @@ mptsas_exit(void)
 	mpt_deregister(mptsasInternalCtx);
 	mpt_deregister(mptsasTaskCtx);
 	mpt_deregister(mptsasDoneCtx);
+	mpt_deregister(mptsasDeviceResetCtx);
 }
 
 module_init(mptsas_init);
diff --git a/drivers/message/fusion/mptsas.h b/drivers/message/fusion/mptsas.h
index 2b544e0877e..953c2bfcf6a 100644
--- a/drivers/message/fusion/mptsas.h
+++ b/drivers/message/fusion/mptsas.h
@@ -53,6 +53,7 @@ struct mptsas_target_reset_event {
 	struct list_head 	list;
 	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data;
 	u8	target_reset_issued;
+	unsigned long	 time_count;
 };
 
 enum mptsas_hotplug_action {
@@ -60,12 +61,37 @@ enum mptsas_hotplug_action {
 	MPTSAS_DEL_DEVICE,
 	MPTSAS_ADD_RAID,
 	MPTSAS_DEL_RAID,
+	MPTSAS_ADD_PHYSDISK,
+	MPTSAS_ADD_PHYSDISK_REPROBE,
+	MPTSAS_DEL_PHYSDISK,
+	MPTSAS_DEL_PHYSDISK_REPROBE,
 	MPTSAS_ADD_INACTIVE_VOLUME,
 	MPTSAS_IGNORE_EVENT,
 };
 
+struct mptsas_mapping{
+	u8			id;
+	u8			channel;
+};
+
+struct mptsas_device_info {
+	struct list_head 	list;
+	struct mptsas_mapping	os;	/* operating system mapping*/
+	struct mptsas_mapping	fw;	/* firmware mapping */
+	u64			sas_address;
+	u32			device_info; /* specific bits for devices */
+	u16			slot;		/* enclosure slot id */
+	u64			enclosure_logical_id; /*enclosure address */
+	u8			is_logical_volume; /* is this logical volume */
+	/* this belongs to volume */
+	u8			is_hidden_raid_component;
+	/* this valid when is_hidden_raid_component set */
+	u8			volume_id;
+	/* cached data for a removed device */
+	u8			is_cached;
+};
+
 struct mptsas_hotplug_event {
-	struct work_struct	work;
 	MPT_ADAPTER		*ioc;
 	enum mptsas_hotplug_action event_type;
 	u64			sas_address;
@@ -73,11 +99,18 @@ struct mptsas_hotplug_event {
 	u8			id;
 	u32			device_info;
 	u16			handle;
-	u16			parent_handle;
 	u8			phy_id;
-	u8			phys_disk_num_valid;	/* hrc (hidden raid component) */
 	u8			phys_disk_num;		/* hrc - unique index*/
-	u8			hidden_raid_component;	/* hrc - don't expose*/
+	struct scsi_device	*sdev;
+};
+
+struct fw_event_work {
+	struct list_head 	list;
+	struct delayed_work	 work;
+	MPT_ADAPTER	*ioc;
+	u32			event;
+	u8			retries;
+	u8			event_data[1];
 };
 
 struct mptsas_discovery_event {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index e62c6bc4ad3..8440f78f696 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -80,7 +80,7 @@ MODULE_VERSION(my_VERSION);
 /*
  *  Other private/forward protos...
  */
-static struct scsi_cmnd * mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
 static void	mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
 static int	SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
@@ -92,18 +92,24 @@ static int	mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
 				 SCSIIORequest_t *pReq, int req_idx);
 static void	mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
 static void	mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
-static int	mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
-static int	mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
 
-static int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
+int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
+		int lun, int ctx2abort, ulong timeout);
 
 int		mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 int		mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
 
+void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+static int	mptscsih_get_completion_code(MPT_ADAPTER *ioc,
+		MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
 int		mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
 static int	mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
 static void	mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
 
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+				SCSITaskMgmtReply_t *pScsiTmReply);
 void 		mptscsih_remove(struct pci_dev *);
 void 		mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
@@ -113,69 +119,6 @@ int 		mptscsih_resume(struct pci_dev *pdev);
 
 #define SNS_LEN(scp)	SCSI_SENSE_BUFFERSIZE
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_sge - Place a simple SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@flagslength: SGE flags and data transfer length
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
-
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_sge() */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_chain - Place a chain SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@next: nextChainOffset value (u32's)
- *	@length: length of next SGL segment
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-
-		pChain->NextChainOffset = next;
-
-		pChain->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pChain->Address.High = cpu_to_le32(tmp);
-	} else {
-		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-		pChain->NextChainOffset = next;
-		pChain->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_chain() */
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -281,10 +224,10 @@ mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
 	 */
 
 nextSGEset:
-	numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
+	numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
 	numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
 
-	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
+	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
 
 	/* Get first (num - 1) SG elements
 	 * Skip any SG entries with a length of 0
@@ -293,17 +236,19 @@ nextSGEset:
 	for (ii=0; ii < (numSgeThisFrame-1); ii++) {
 		thisxfer = sg_dma_len(sg);
 		if (thisxfer == 0) {
-			sg = sg_next(sg); /* Get next SG element from the OS */
+			/* Get next SG element from the OS */
+			sg = sg_next(sg);
 			sg_done++;
 			continue;
 		}
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
 
-		sg = sg_next(sg);	/* Get next SG element from the OS */
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		/* Get next SG element from the OS */
+		sg = sg_next(sg);
+		psge += ioc->SGE_size;
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 	}
 
@@ -320,12 +265,8 @@ nextSGEset:
 		thisxfer = sg_dma_len(sg);
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
-		/*
-		sg = sg_next(sg);
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		*/
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 
 		if (chainSge) {
@@ -334,7 +275,8 @@ nextSGEset:
 			 * Update the chain element
 			 * Offset and Length fields.
 			 */
-			mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			ioc->add_chain((char *)chainSge, 0, sgeOffset,
+				ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The current buffer is the original MF
 			 * and there is no Chain buffer.
@@ -367,7 +309,7 @@ nextSGEset:
 		 * set properly).
 		 */
 		if (sg_done) {
-			u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
+			u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
 			sgflags = le32_to_cpu(*ptmp);
 			sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
 			*ptmp = cpu_to_le32(sgflags);
@@ -381,8 +323,9 @@ nextSGEset:
 			 * Old chain element is now complete.
 			 */
 			u8 nextChain = (u8) (sgeOffset >> 2);
-			sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
-			mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			sgeOffset += ioc->SGE_size;
+			ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
+					 ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The original MF buffer requires a chain buffer -
 			 * set the offset.
@@ -592,14 +535,15 @@ mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pSc
 	}
 
 	scsi_print_command(sc);
-	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d\n",
-	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID);
+	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %d\n",
+	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
 	printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
 	    "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
 	    scsi_get_resid(sc));
 	printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
 	    "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
 	    le32_to_cpu(pScsiReply->TransferCount), sc->result);
+
 	printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
 	    "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
 	    ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
@@ -654,16 +598,14 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
 	req_idx_MR = (mr != NULL) ?
 	    le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+
+	/* Special case, where already freed message frame is received from
+	 * Firmware. It happens with Resetting IOC.
+	 * Return immediately. Do not care
+	 */
 	if ((req_idx != req_idx_MR) ||
-	    (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
-		printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
-		    ioc->name);
-		printk (MYIOC_s_ERR_FMT
-		    "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
-		    ioc->name, req_idx, req_idx_MR, mf, mr,
-		    mptscsih_get_scsi_lookup(ioc, req_idx_MR));
+	    (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
 		return 0;
-	}
 
 	sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
 	if (sc == NULL) {
@@ -810,12 +752,16 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 			 */
 
 		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
-		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
 			/* Linux handles an unsolicited DID_RESET better
 			 * than an unsolicited DID_ABORT.
 			 */
 			sc->result = DID_RESET << 16;
 
+		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
+			if (ioc->bus_type == FC)
+				sc->result = DID_ERROR << 16;
+			else
+				sc->result = DID_RESET << 16;
 			break;
 
 		case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:	/* 0x0049 */
@@ -992,9 +938,9 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
 		scsi_dma_unmap(sc);
 		sc->result = DID_RESET << 16;
 		sc->host_scribble = NULL;
-		sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
-		    "completing cmds: fw_channel %d, fw_id %d, sc=%p,"
-		    " mf = %p, idx=%x\n", ioc->name, channel, id, sc, mf, ii);
+		dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
+		    "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
+		    "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
 		sc->scsi_done(sc);
 	}
 }
@@ -1053,9 +999,11 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
 			scsi_dma_unmap(sc);
 			sc->host_scribble = NULL;
 			sc->result = DID_NO_CONNECT << 16;
-			sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT "completing cmds: fw_channel %d,"
-			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, vdevice->vtarget->channel,
-			   vdevice->vtarget->id, sc, mf, ii);
+			dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
+			   MYIOC_s_FMT "completing cmds: fw_channel %d, "
+			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
+			   vdevice->vtarget->channel, vdevice->vtarget->id,
+			   sc, mf, ii));
 			sc->scsi_done(sc);
 			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 		}
@@ -1346,7 +1294,6 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	MPT_FRAME_HDR		*mf;
 	SCSIIORequest_t		*pScsiReq;
 	VirtDevice		*vdevice = SCpnt->device->hostdata;
-	int	 lun;
 	u32	 datalen;
 	u32	 scsictl;
 	u32	 scsidir;
@@ -1357,13 +1304,12 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 
 	hd = shost_priv(SCpnt->device->host);
 	ioc = hd->ioc;
-	lun = SCpnt->device->lun;
 	SCpnt->scsi_done = done;
 
 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
 		ioc->name, SCpnt, done));
 
-	if (hd->resetPending) {
+	if (ioc->taskmgmt_quiesce_io) {
 		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
 			ioc->name, SCpnt));
 		return SCSI_MLQUEUE_HOST_BUSY;
@@ -1422,7 +1368,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	pScsiReq->CDBLength = SCpnt->cmd_len;
 	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
 	pScsiReq->Reserved = 0;
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
 	pScsiReq->Control = cpu_to_le32(scsictl);
 
@@ -1448,7 +1394,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	 */
 	if (datalen == 0) {
 		/* Add a NULL SGE */
-		mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
+		ioc->add_sge((char *)&pScsiReq->SGL,
+			MPT_SGE_FLAGS_SSIMPLE_READ | 0,
 			(dma_addr_t) -1);
 	} else {
 		/* Add a 32 or 64 bit SGE */
@@ -1528,8 +1475,8 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *	mptscsih_TMHandler - Generic handler for SCSI Task Management.
- *	@hd: Pointer to MPT SCSI HOST structure
+ *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
+ *	@hd: Pointer to MPT_SCSI_HOST structure
  *	@type: Task Management type
  *	@channel: channel number for task management
  *	@id: Logical Target ID for reset (if appropriate)
@@ -1537,145 +1484,68 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
  *	@ctx2abort: Context for the task to be aborted (if appropriate)
  *	@timeout: timeout for task management control
  *
- *	Fall through to mpt_HardResetHandler if: not operational, too many
- *	failed TM requests or handshake failure.
+ *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
+ *	or a non-interrupt thread.  In the former, must not call schedule().
  *
- *	Remark: Currently invoked from a non-interrupt thread (_bh).
+ *	Not all fields are meaningfull for all task types.
  *
- *	Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC
- *	will be active.
+ *	Returns 0 for SUCCESS, or FAILED.
  *
- *	Returns 0 for SUCCESS, or %FAILED.
  **/
 int
-mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
+mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
+	int ctx2abort, ulong timeout)
 {
-	MPT_ADAPTER	*ioc;
-	int		 rc = -1;
+	MPT_FRAME_HDR	*mf;
+	SCSITaskMgmt_t	*pScsiTm;
+	int		 ii;
+	int		 retval;
+	MPT_ADAPTER 	*ioc = hd->ioc;
+	unsigned long	 timeleft;
+	u8		 issue_hard_reset;
 	u32		 ioc_raw_state;
-	unsigned long	 flags;
-
-	ioc = hd->ioc;
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler Entered!\n", ioc->name));
-
-	// SJR - CHECKME - Can we avoid this here?
-	// (mpt_HardResetHandler has this check...)
-	spin_lock_irqsave(&ioc->diagLock, flags);
-	if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
-		spin_unlock_irqrestore(&ioc->diagLock, flags);
-		return FAILED;
-	}
-	spin_unlock_irqrestore(&ioc->diagLock, flags);
-
-	/*  Wait a fixed amount of time for the TM pending flag to be cleared.
-	 *  If we time out and not bus reset, then we return a FAILED status
-	 *  to the caller.
-	 *  The call to mptscsih_tm_pending_wait() will set the pending flag
-	 *  if we are
-	 *  successful. Otherwise, reload the FW.
-	 */
-	if (mptscsih_tm_pending_wait(hd) == FAILED) {
-		if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler abort: "
-			   "Timed out waiting for last TM (%d) to complete! \n",
-			   ioc->name, hd->tmPending));
-			return FAILED;
-		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler target "
-				"reset: Timed out waiting for last TM (%d) "
-				"to complete! \n", ioc->name,
-				hd->tmPending));
-			return FAILED;
-		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
-			dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler bus reset: "
-			   "Timed out waiting for last TM (%d) to complete! \n",
-			  ioc->name, hd->tmPending));
-			return FAILED;
-		}
-	} else {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		hd->tmPending |=  (1 << type);
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-	}
+	unsigned long	 time_count;
 
+	issue_hard_reset = 0;
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
 
 	if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
 		printk(MYIOC_s_WARN_FMT
-			"TM Handler for type=%x: IOC Not operational (0x%x)!\n",
+			"TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
 			ioc->name, type, ioc_raw_state);
-		printk(MYIOC_s_WARN_FMT " Issuing HardReset!!\n", ioc->name);
+		printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
+		    ioc->name, __func__);
 		if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
-			printk(MYIOC_s_WARN_FMT "TMHandler: HardReset "
+			printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
 			    "FAILED!!\n", ioc->name);
-		return FAILED;
+		return 0;
 	}
 
 	if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
 		printk(MYIOC_s_WARN_FMT
-			"TM Handler for type=%x: ioc_state: "
+			"TaskMgmt type=%x: ioc_state: "
 			"DOORBELL_ACTIVE (0x%x)!\n",
 			ioc->name, type, ioc_raw_state);
 		return FAILED;
 	}
 
-	/* Isse the Task Mgmt request.
-	 */
-	if (hd->hard_resets < -1)
-		hd->hard_resets++;
-
-	rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
-	    ctx2abort, timeout);
-	if (rc)
-		printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
-		       ioc->name);
-	else
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issue of TaskMgmt Successful!\n",
-			   ioc->name));
-
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-			"TMHandler rc = %d!\n", ioc->name, rc));
-
-	return rc;
-}
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
- *	@hd: Pointer to MPT_SCSI_HOST structure
- *	@type: Task Management type
- *	@channel: channel number for task management
- *	@id: Logical Target ID for reset (if appropriate)
- *	@lun: Logical Unit for reset (if appropriate)
- *	@ctx2abort: Context for the task to be aborted (if appropriate)
- *	@timeout: timeout for task management control
- *
- *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
- *	or a non-interrupt thread.  In the former, must not call schedule().
- *
- *	Not all fields are meaningfull for all task types.
- *
- *	Returns 0 for SUCCESS, or FAILED.
- *
- **/
-static int
-mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
-{
-	MPT_FRAME_HDR	*mf;
-	SCSITaskMgmt_t	*pScsiTm;
-	int		 ii;
-	int		 retval;
-	MPT_ADAPTER 	*ioc = hd->ioc;
+	mutex_lock(&ioc->taskmgmt_cmds.mutex);
+	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+		mf = NULL;
+		retval = FAILED;
+		goto out;
+	}
 
 	/* Return Fail to calling function if no message frames available.
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
-				ioc->name));
-		return FAILED;
+		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+			"TaskMgmt no msg frames!!\n", ioc->name));
+		retval = FAILED;
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		goto out;
 	}
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
 			ioc->name, mf));
 
 	/* Format the Request
@@ -1699,11 +1569,14 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, i
 
 	pScsiTm->TaskMsgContext = ctx2abort;
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
-		"type=%d\n", ioc->name, ctx2abort, type));
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
+		"task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
+		type, timeout));
 
 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
 
+	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	time_count = jiffies;
 	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
 	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
 		mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
@@ -1711,47 +1584,50 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, i
 		retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
 			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
 		if (retval) {
-			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "send_handshake FAILED!"
-			" (hd %p, ioc %p, mf %p, rc=%d) \n", ioc->name, hd,
-			ioc, mf, retval));
-			goto fail_out;
+			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+				"TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
+				ioc->name, mf, retval));
+			mpt_free_msg_frame(ioc, mf);
+			mpt_clear_taskmgmt_in_progress_flag(ioc);
+			goto out;
 		}
 	}
 
-	if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
-		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "task management request TIMED OUT!"
-			" (hd %p, ioc %p, mf %p) \n", ioc->name, hd,
-			ioc, mf));
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
-			 ioc->name));
-		retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rc=%d \n",
-			 ioc->name, retval));
-		goto fail_out;
+	timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+		timeout*HZ);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		retval = FAILED;
+		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+		    "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		issue_hard_reset = 1;
+		goto out;
 	}
 
-	/*
-	 * Handle success case, see if theres a non-zero ioc_status.
-	 */
-	if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
-	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
-	   hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
-		retval = 0;
-	else
-		retval = FAILED;
+	retval = mptscsih_taskmgmt_reply(ioc, type,
+	    (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
 
-	return retval;
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt completed (%d seconds)\n",
+	    ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
 
- fail_out:
+ out:
 
-	/*
-	 * Free task management mf, and corresponding tm flags
-	 */
-	mpt_free_msg_frame(ioc, mf);
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	return FAILED;
+	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+	if (issue_hard_reset) {
+		printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			ioc->name, __func__);
+		retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+		mpt_free_msg_frame(ioc, mf);
+	}
+
+	retval = (retval == 0) ? 0 : FAILED;
+	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+	return retval;
 }
+EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
 
 static int
 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
@@ -1838,13 +1714,8 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 		goto out;
 	}
 
-	if (hd->resetPending) {
-		retval = FAILED;
-		goto out;
-	}
-
-	if (hd->timeouts < -1)
-		hd->timeouts++;
+	if (ioc->timeouts < -1)
+		ioc->timeouts++;
 
 	if (mpt_fwfault_debug)
 		mpt_halt_firmware(ioc);
@@ -1861,22 +1732,30 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 
 	hd->abortSCpnt = SCpnt;
 
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
-	    vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun,
-	    ctx2abort, mptscsih_get_tm_timeout(ioc));
+	retval = mptscsih_IssueTaskMgmt(hd,
+			 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+			 vdevice->vtarget->channel,
+			 vdevice->vtarget->id, vdevice->lun,
+			 ctx2abort, mptscsih_get_tm_timeout(ioc));
 
 	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
-	    SCpnt->serial_number == sn)
+	    SCpnt->serial_number == sn) {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "task abort: command still in active list! (sc=%p)\n",
+		    ioc->name, SCpnt));
 		retval = FAILED;
+	} else {
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "task abort: command cleared from active list! (sc=%p)\n",
+		    ioc->name, SCpnt));
+		retval = SUCCESS;
+	}
 
  out:
 	printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
-	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
 
-	if (retval == 0)
-		return SUCCESS;
-	else
-		return FAILED;
+	return retval;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1909,14 +1788,9 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 	       ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
 
-	if (hd->resetPending) {
-		retval = FAILED;
-		goto out;
-	}
-
 	vdevice = SCpnt->device->hostdata;
 	if (!vdevice || !vdevice->vtarget) {
-		retval = 0;
+		retval = SUCCESS;
 		goto out;
 	}
 
@@ -1927,9 +1801,11 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 		goto out;
 	}
 
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
-	    vdevice->vtarget->channel, vdevice->vtarget->id, 0, 0,
-	    mptscsih_get_tm_timeout(ioc));
+	retval = mptscsih_IssueTaskMgmt(hd,
+				MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+				vdevice->vtarget->channel,
+				vdevice->vtarget->id, 0, 0,
+				mptscsih_get_tm_timeout(ioc));
 
  out:
 	printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
@@ -1972,12 +1848,16 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
 	       ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
 
-	if (hd->timeouts < -1)
-		hd->timeouts++;
+	if (ioc->timeouts < -1)
+		ioc->timeouts++;
 
 	vdevice = SCpnt->device->hostdata;
-	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
-	    vdevice->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(ioc));
+	if (!vdevice || !vdevice->vtarget)
+		return SUCCESS;
+	retval = mptscsih_IssueTaskMgmt(hd,
+					MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+					vdevice->vtarget->channel, 0, 0, 0,
+					mptscsih_get_tm_timeout(ioc));
 
 	printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
@@ -2001,8 +1881,9 @@ int
 mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 {
 	MPT_SCSI_HOST *  hd;
-	int              retval;
+	int              status = SUCCESS;
 	MPT_ADAPTER	*ioc;
+	int		retval;
 
 	/*  If we can't locate the host to reset, then we failed. */
 	if ((hd = shost_priv(SCpnt->device->host)) == NULL){
@@ -2021,86 +1902,71 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 	/*  If our attempts to reset the host failed, then return a failed
 	 *  status.  The host will be taken off line by the SCSI mid-layer.
 	 */
-	if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) {
-		retval = FAILED;
-	} else {
-		/*  Make sure TM pending is cleared and TM state is set to
-		 *  NONE.
-		 */
-		retval = 0;
-		hd->tmPending = 0;
-		hd->tmState = TM_STATE_NONE;
-	}
+    retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+	if (retval < 0)
+		status = FAILED;
+	else
+		status = SUCCESS;
 
 	printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
 
-	return retval;
+	return status;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_tm_pending_wait - wait for pending task management request to complete
- *	@hd: Pointer to MPT host structure.
- *
- *	Returns {SUCCESS,FAILED}.
- */
 static int
-mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+	SCSITaskMgmtReply_t *pScsiTmReply)
 {
-	unsigned long  flags;
-	int            loop_count = 4 * 10;  /* Wait 10 seconds */
-	int            status = FAILED;
-	MPT_ADAPTER	*ioc = hd->ioc;
+	u16			 iocstatus;
+	u32			 termination_count;
+	int			 retval;
 
-	do {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		if (hd->tmState == TM_STATE_NONE) {
-			hd->tmState = TM_STATE_IN_PROGRESS;
-			hd->tmPending = 1;
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-			status = SUCCESS;
-			break;
-		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		msleep(250);
-	} while (--loop_count);
+	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+		retval = FAILED;
+		goto out;
+	}
 
-	return status;
-}
+	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_tm_wait_for_completion - wait for completion of TM task
- *	@hd: Pointer to MPT host structure.
- *	@timeout: timeout value
- *
- *	Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
-{
-	unsigned long  flags;
-	int            loop_count = 4 * timeout;
-	int            status = FAILED;
-	MPT_ADAPTER	*ioc = hd->ioc;
+	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
 
-	do {
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		if(hd->tmPending == 0) {
-			status = SUCCESS;
-			spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-			break;
-		}
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		msleep(250);
-	} while (--loop_count);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
+	    "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
+	    "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
+	    pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
+	    le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
+	    termination_count));
 
-	return status;
+	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+	    pScsiTmReply->ResponseCode)
+		mptscsih_taskmgmt_response_code(ioc,
+		    pScsiTmReply->ResponseCode);
+
+	if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
+		retval = 0;
+		goto out;
+	}
+
+	retval = FAILED;
+	if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+		if (termination_count == 1)
+			retval = 0;
+		goto out;
+	}
+
+	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
+		retval = 0;
+
+ out:
+	return retval;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static void
+void
 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
 {
 	char *desc;
@@ -2134,6 +2000,7 @@ mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
 	printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
 		ioc->name, response_code, desc);
 }
+EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -2150,97 +2017,28 @@ mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
  *	Returns 1 indicating alloc'd request frame ptr should be freed.
  **/
 int
-mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
+	MPT_FRAME_HDR *mr)
 {
-	SCSITaskMgmtReply_t	*pScsiTmReply;
-	SCSITaskMgmt_t		*pScsiTmReq;
-	MPT_SCSI_HOST		*hd;
-	unsigned long		 flags;
-	u16			 iocstatus;
-	u8			 tmType;
-	u32			 termination_count;
-
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
-	    ioc->name, mf, mr));
-	if (!ioc->sh) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
-		    "TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
-		return 1;
-	}
-
-	if (mr == NULL) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
-		    "ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
-		return 1;
-	}
-
-	hd = shost_priv(ioc->sh);
-	pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
-	pScsiTmReq = (SCSITaskMgmt_t*)mf;
-	tmType = pScsiTmReq->TaskType;
-	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
+	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
 
-	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
-	    pScsiTmReply->ResponseCode)
-		mptscsih_taskmgmt_response_code(ioc,
-		    pScsiTmReply->ResponseCode);
-	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
 
-#ifdef CONFIG_FUSION_LOGGING
-	if ((ioc->debug_level & MPT_DEBUG_REPLY) ||
-				(ioc->debug_level & MPT_DEBUG_TM ))
-		printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
-			"iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
-			"term_cmnds=%d\n", __func__, ioc->id, pScsiTmReply->Bus,
-			 pScsiTmReply->TargetID, pScsiTmReq->TaskType,
-			le16_to_cpu(pScsiTmReply->IOCStatus),
-			le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
-			le32_to_cpu(pScsiTmReply->TerminationCount));
-#endif
-	if (!iocstatus) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT " TaskMgmt SUCCESS\n", ioc->name));
-			hd->abortSCpnt = NULL;
+	if (!mr)
 		goto out;
-	}
-
-	/* Error?  (anything non-zero?) */
-
-	/* clear flags and continue.
-	 */
-	switch (tmType) {
-
-	case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
-		if (termination_count == 1)
-			iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
-		hd->abortSCpnt = NULL;
-		break;
-
-	case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
-
-		/* If an internal command is present
-		 * or the TM failed - reload the FW.
-		 * FC FW may respond FAILED to an ABORT
-		 */
-		if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
-		    hd->cmdPtr)
-			if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
-				printk(MYIOC_s_WARN_FMT " Firmware Reload FAILED!!\n", ioc->name);
-		break;
-
-	case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
-	default:
-		break;
-	}
 
+	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->taskmgmt_cmds.reply, mr,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
  out:
-	spin_lock_irqsave(&ioc->FreeQlock, flags);
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->tm_iocstatus = iocstatus;
-	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
-	return 1;
+	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+		mpt_clear_taskmgmt_in_progress_flag(ioc);
+		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+		complete(&ioc->taskmgmt_cmds.done);
+		return 1;
+	}
+	return 0;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2290,8 +2088,10 @@ int
 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	struct inactive_raid_component_info *component_info;
-	int i;
+	int i, j;
+	RaidPhysDiskPage1_t *phys_disk;
 	int rc = 0;
+	int num_paths;
 
 	if (!ioc->raid_data.pIocPg3)
 		goto out;
@@ -2303,6 +2103,45 @@ mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
 		}
 	}
 
+	if (ioc->bus_type != SAS)
+		goto out;
+
+	/*
+	 * Check if dual path
+	 */
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+		if (num_paths < 2)
+			continue;
+		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+		if (!phys_disk)
+			continue;
+		if ((mpt_raid_phys_disk_pg1(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+		    phys_disk))) {
+			kfree(phys_disk);
+			continue;
+		}
+		for (j = 0; j < num_paths; j++) {
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
+				continue;
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+				continue;
+			if ((id == phys_disk->Path[j].PhysDiskID) &&
+			    (channel == phys_disk->Path[j].PhysDiskBus)) {
+				rc = 1;
+				kfree(phys_disk);
+				goto out;
+			}
+		}
+		kfree(phys_disk);
+	}
+
+
 	/*
 	 * Check inactive list for matching phys disks
 	 */
@@ -2327,8 +2166,10 @@ u8
 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
 {
 	struct inactive_raid_component_info *component_info;
-	int i;
+	int i, j;
+	RaidPhysDiskPage1_t *phys_disk;
 	int rc = -ENXIO;
+	int num_paths;
 
 	if (!ioc->raid_data.pIocPg3)
 		goto out;
@@ -2340,6 +2181,44 @@ mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
 		}
 	}
 
+	if (ioc->bus_type != SAS)
+		goto out;
+
+	/*
+	 * Check if dual path
+	 */
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+		if (num_paths < 2)
+			continue;
+		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+		if (!phys_disk)
+			continue;
+		if ((mpt_raid_phys_disk_pg1(ioc,
+		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+		    phys_disk))) {
+			kfree(phys_disk);
+			continue;
+		}
+		for (j = 0; j < num_paths; j++) {
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
+				continue;
+			if ((phys_disk->Path[j].Flags &
+			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+				continue;
+			if ((id == phys_disk->Path[j].PhysDiskID) &&
+			    (channel == phys_disk->Path[j].PhysDiskBus)) {
+				rc = phys_disk->PhysDiskNum;
+				kfree(phys_disk);
+				goto out;
+			}
+		}
+		kfree(phys_disk);
+	}
+
 	/*
 	 * Check inactive list for matching phys disks
 	 */
@@ -2457,7 +2336,6 @@ mptscsih_slave_configure(struct scsi_device *sdev)
 		    sdev->ppr, sdev->inquiry_len));
 
 	vdevice->configured_lun = 1;
-	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"Queue depth=%d, tflags=%x\n",
@@ -2469,6 +2347,7 @@ mptscsih_slave_configure(struct scsi_device *sdev)
 		    ioc->name, vtarget->negoFlags, vtarget->maxOffset,
 		    vtarget->minSyncFactor));
 
+	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"tagged %d, simple %d, ordered %d\n",
 		ioc->name,sdev->tagged_supported, sdev->simple_tags,
@@ -2542,15 +2421,13 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR
 }
 
 /**
- * mptscsih_get_scsi_lookup
+ * mptscsih_get_scsi_lookup - retrieves scmd entry
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * retrieves scmd entry from ScsiLookup[] array list
- *
  * Returns the scsi_cmd pointer
- **/
-static struct scsi_cmnd *
+ */
+struct scsi_cmnd *
 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
 {
 	unsigned long	flags;
@@ -2562,15 +2439,15 @@ mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
 
 	return scmd;
 }
+EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
 
 /**
- * mptscsih_getclear_scsi_lookup
+ * mptscsih_getclear_scsi_lookup -  retrieves and clears scmd entry from ScsiLookup[] array list
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * retrieves and clears scmd entry from ScsiLookup[] array list
- *
  * Returns the scsi_cmd pointer
+ *
  **/
 static struct scsi_cmnd *
 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
@@ -2635,94 +2512,33 @@ int
 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
-	unsigned long	 flags;
 
-	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-	    ": IOC %s_reset routed to SCSI host driver!\n",
-	    ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
-	    reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
-	/* If a FW reload request arrives after base installed but
-	 * before all scsi hosts have been attached, then an alt_ioc
-	 * may have a NULL sh pointer.
-	 */
 	if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
 		return 0;
-	else
-		hd = shost_priv(ioc->sh);
-
-	if (reset_phase == MPT_IOC_SETUP_RESET) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Setup-Diag Reset\n", ioc->name));
-
-		/* Clean Up:
-		 * 1. Set Hard Reset Pending Flag
-		 * All new commands go to doneQ
-		 */
-		hd->resetPending = 1;
-
-	} else if (reset_phase == MPT_IOC_PRE_RESET) {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Diag Reset\n", ioc->name));
 
-		/* 2. Flush running commands
-		 *	Clean ScsiLookup (and associated memory)
-		 *	AND clean mytaskQ
-		 */
-
-		/* 2b. Reply to OS all known outstanding I/O commands.
-		 */
+	hd = shost_priv(ioc->sh);
+	switch (reset_phase) {
+	case MPT_IOC_SETUP_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+		break;
+	case MPT_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
 		mptscsih_flush_running_cmds(hd);
-
-		/* 2c. If there was an internal command that
-		 * has not completed, configuration or io request,
-		 * free these resources.
-		 */
-		if (hd->cmdPtr) {
-			del_timer(&hd->timer);
-			mpt_free_msg_frame(ioc, hd->cmdPtr);
-		}
-
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Reset complete.\n", ioc->name));
-
-	} else {
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Diag Reset\n", ioc->name));
-
-		/* Once a FW reload begins, all new OS commands are
-		 * redirected to the doneQ w/ a reset status.
-		 * Init all control structures.
-		 */
-
-		/* 2. Chain Buffer initialization
-		 */
-
-		/* 4. Renegotiate to all devices, if SPI
-		 */
-
-		/* 5. Enable new commands to be posted
-		 */
-		spin_lock_irqsave(&ioc->FreeQlock, flags);
-		hd->tmPending = 0;
-		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-		hd->resetPending = 0;
-		hd->tmState = TM_STATE_NONE;
-
-		/* 6. If there was an internal command,
-		 * wake this process up.
-		 */
-		if (hd->cmdPtr) {
-			/*
-			 * Wake up the original calling thread
-			 */
-			hd->pLocal = &hd->localReply;
-			hd->pLocal->completion = MPT_SCANDV_DID_RESET;
-			hd->scandv_wait_done = 1;
-			wake_up(&hd->scandv_waitq);
-			hd->cmdPtr = NULL;
+		break;
+	case MPT_IOC_POST_RESET:
+		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
+			ioc->internal_cmds.status |=
+				MPT_MGMT_STATUS_DID_IOCRESET;
+			complete(&ioc->internal_cmds.done);
 		}
-
-		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Reset complete.\n", ioc->name));
-
+		break;
+	default:
+		break;
 	}
-
 	return 1;		/* currently means nothing really */
 }
 
@@ -2730,55 +2546,16 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 int
 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 {
-	MPT_SCSI_HOST *hd;
 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
 
-	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
-			ioc->name, event));
-
-	if (ioc->sh == NULL ||
-		((hd = shost_priv(ioc->sh)) == NULL))
-		return 1;
-
-	switch (event) {
-	case MPI_EVENT_UNIT_ATTENTION:			/* 03 */
-		/* FIXME! */
-		break;
-	case MPI_EVENT_IOC_BUS_RESET:			/* 04 */
-	case MPI_EVENT_EXT_BUS_RESET:			/* 05 */
-		if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
-			hd->soft_resets++;
-		break;
-	case MPI_EVENT_LOGOUT:				/* 09 */
-		/* FIXME! */
-		break;
-
-	case MPI_EVENT_RESCAN:				/* 06 */
-		break;
-
-		/*
-		 *  CHECKME! Don't think we need to do
-		 *  anything for these, but...
-		 */
-	case MPI_EVENT_LINK_STATUS_CHANGE:		/* 07 */
-	case MPI_EVENT_LOOP_STATE_CHANGE:		/* 08 */
-		/*
-		 *  CHECKME!  Falling thru...
-		 */
-		break;
-
-	case MPI_EVENT_INTEGRATED_RAID:			/* 0B */
-		break;
+	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		"MPT event (=%02Xh) routed to SCSI host driver!\n",
+		ioc->name, event));
 
-	case MPI_EVENT_NONE:				/* 00 */
-	case MPI_EVENT_LOG_DATA:			/* 01 */
-	case MPI_EVENT_STATE_CHANGE:			/* 02 */
-	case MPI_EVENT_EVENT_CHANGE:			/* 0A */
-	default:
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": Ignoring event (=%02Xh)\n",
-		    ioc->name, event));
-		break;
-	}
+	if ((event == MPI_EVENT_IOC_BUS_RESET ||
+	    event == MPI_EVENT_EXT_BUS_RESET) &&
+	    (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
+			ioc->soft_resets++;
 
 	return 1;		/* currently means nothing really */
 }
@@ -2809,153 +2586,44 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
  *	Used ONLY for DV and other internal commands.
  */
 int
-mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+				MPT_FRAME_HDR *reply)
 {
-	MPT_SCSI_HOST	*hd;
 	SCSIIORequest_t *pReq;
-	int		 completionCode;
+	SCSIIOReply_t	*pReply;
+	u8		 cmd;
 	u16		 req_idx;
+	u8	*sense_data;
+	int		 sz;
 
-	hd = shost_priv(ioc->sh);
-
-	if ((mf == NULL) ||
-	    (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
-		printk(MYIOC_s_ERR_FMT
-			"ScanDvComplete, %s req frame ptr! (=%p)\n",
-				ioc->name, mf?"BAD":"NULL", (void *) mf);
-		goto wakeup;
-	}
-
-	del_timer(&hd->timer);
-	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
-	mptscsih_set_scsi_lookup(ioc, req_idx, NULL);
-	pReq = (SCSIIORequest_t *) mf;
+	ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+	ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
+	if (!reply)
+		goto out;
 
-	if (mf != hd->cmdPtr) {
-		printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
-				ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
+	pReply = (SCSIIOReply_t *) reply;
+	pReq = (SCSIIORequest_t *) req;
+	ioc->internal_cmds.completion_code =
+	    mptscsih_get_completion_code(ioc, req, reply);
+	ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+	memcpy(ioc->internal_cmds.reply, reply,
+	    min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
+	cmd = reply->u.hdr.Function;
+	if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+	    (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
+	    (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+		req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
+		sense_data = ((u8 *)ioc->sense_buf_pool +
+		    (req_idx * MPT_SENSE_BUFFER_ALLOC));
+		sz = min_t(int, pReq->SenseBufferLength,
+		    MPT_SENSE_BUFFER_ALLOC);
+		memcpy(ioc->internal_cmds.sense, sense_data, sz);
 	}
-	hd->cmdPtr = NULL;
-
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
-			ioc->name, mf, mr, req_idx));
-
-	hd->pLocal = &hd->localReply;
-	hd->pLocal->scsiStatus = 0;
-
-	/* If target struct exists, clear sense valid flag.
-	 */
-	if (mr == NULL) {
-		completionCode = MPT_SCANDV_GOOD;
-	} else {
-		SCSIIOReply_t	*pReply;
-		u16		 status;
-		u8		 scsi_status;
-
-		pReply = (SCSIIOReply_t *) mr;
-
-		status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
-		scsi_status = pReply->SCSIStatus;
-
-
-		switch(status) {
-
-		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
-			completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
-			break;
-
-		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
-		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
-		case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
-		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
-			completionCode = MPT_SCANDV_DID_RESET;
-			break;
-
-		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
-		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
-		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
-			if (pReply->Function == MPI_FUNCTION_CONFIG) {
-				ConfigReply_t *pr = (ConfigReply_t *)mr;
-				completionCode = MPT_SCANDV_GOOD;
-				hd->pLocal->header.PageVersion = pr->Header.PageVersion;
-				hd->pLocal->header.PageLength = pr->Header.PageLength;
-				hd->pLocal->header.PageNumber = pr->Header.PageNumber;
-				hd->pLocal->header.PageType = pr->Header.PageType;
-
-			} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
-				/* If the RAID Volume request is successful,
-				 * return GOOD, else indicate that
-				 * some type of error occurred.
-				 */
-				MpiRaidActionReply_t	*pr = (MpiRaidActionReply_t *)mr;
-				if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
-					completionCode = MPT_SCANDV_GOOD;
-				else
-					completionCode = MPT_SCANDV_SOME_ERROR;
-				memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));
-
-			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
-				u8		*sense_data;
-				int		 sz;
-
-				/* save sense data in global structure
-				 */
-				completionCode = MPT_SCANDV_SENSE;
-				hd->pLocal->scsiStatus = scsi_status;
-				sense_data = ((u8 *)ioc->sense_buf_pool +
-					(req_idx * MPT_SENSE_BUFFER_ALLOC));
-
-				sz = min_t(int, pReq->SenseBufferLength,
-							SCSI_STD_SENSE_BYTES);
-				memcpy(hd->pLocal->sense, sense_data, sz);
-
-				ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Check Condition, sense ptr %p\n",
-				    ioc->name, sense_data));
-			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
-				if (pReq->CDB[0] == INQUIRY)
-					completionCode = MPT_SCANDV_ISSUE_SENSE;
-				else
-					completionCode = MPT_SCANDV_DID_RESET;
-			}
-			else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else {
-				completionCode = MPT_SCANDV_GOOD;
-				hd->pLocal->scsiStatus = scsi_status;
-			}
-			break;
-
-		case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
-			if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
-				completionCode = MPT_SCANDV_DID_RESET;
-			else
-				completionCode = MPT_SCANDV_SOME_ERROR;
-			break;
-
-		default:
-			completionCode = MPT_SCANDV_SOME_ERROR;
-			break;
-
-		}	/* switch(status) */
-
-	} /* end of address reply case */
-
-	hd->pLocal->completion = completionCode;
-
-	/* MF and RF are freed in mpt_interrupt
-	 */
-wakeup:
-	/* Free Chain buffers (will never chain) in scan or dv */
-	//mptscsih_freeChainBuffers(ioc, req_idx);
-
-	/*
-	 * Wake up the original calling thread
-	 */
-	hd->scandv_wait_done = 1;
-	wake_up(&hd->scandv_waitq);
-
+ out:
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
+		return 0;
+	ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+	complete(&ioc->internal_cmds.done);
 	return 1;
 }
 
@@ -3004,6 +2672,95 @@ mptscsih_timer_expired(unsigned long data)
 	return;
 }
 
+/**
+ *	mptscsih_get_completion_code -
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@req: Pointer to original MPT request frame
+ *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
+ *
+ **/
+static int
+mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+				MPT_FRAME_HDR *reply)
+{
+	SCSIIOReply_t	*pReply;
+	MpiRaidActionReply_t *pr;
+	u8		 scsi_status;
+	u16		 status;
+	int		 completion_code;
+
+	pReply = (SCSIIOReply_t *)reply;
+	status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+	scsi_status = pReply->SCSIStatus;
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
+	    "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
+	    scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
+
+	switch (status) {
+
+	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
+		completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
+	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
+	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
+	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
+		completion_code = MPT_SCANDV_DID_RESET;
+		break;
+
+	case MPI_IOCSTATUS_BUSY:
+	case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		completion_code = MPT_SCANDV_BUSY;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
+	case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
+	case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
+		if (pReply->Function == MPI_FUNCTION_CONFIG) {
+			completion_code = MPT_SCANDV_GOOD;
+		} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
+			pr = (MpiRaidActionReply_t *)reply;
+			if (le16_to_cpu(pr->ActionStatus) ==
+				MPI_RAID_ACTION_ASTATUS_SUCCESS)
+				completion_code = MPT_SCANDV_GOOD;
+			else
+				completion_code = MPT_SCANDV_SOME_ERROR;
+		} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
+			completion_code = MPT_SCANDV_SENSE;
+		else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
+			if (req->u.scsireq.CDB[0] == INQUIRY)
+				completion_code = MPT_SCANDV_ISSUE_SENSE;
+			else
+				completion_code = MPT_SCANDV_DID_RESET;
+		} else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else if (scsi_status == MPI_SCSI_STATUS_BUSY)
+			completion_code = MPT_SCANDV_BUSY;
+		else
+			completion_code = MPT_SCANDV_GOOD;
+		break;
+
+	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
+		if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+			completion_code = MPT_SCANDV_DID_RESET;
+		else
+			completion_code = MPT_SCANDV_SOME_ERROR;
+		break;
+	default:
+		completion_code = MPT_SCANDV_SOME_ERROR;
+		break;
+
+	}	/* switch(status) */
+
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "  completionCode set to %08xh\n", ioc->name, completion_code));
+	return completion_code;
+}
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
@@ -3030,22 +2787,27 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 {
 	MPT_FRAME_HDR	*mf;
 	SCSIIORequest_t	*pScsiReq;
-	SCSIIORequest_t	 ReqCopy;
 	int		 my_idx, ii, dir;
-	int		 rc, cmdTimeout;
-	int		in_isr;
+	int		 timeout;
 	char		 cmdLen;
 	char		 CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-	char		 cmd = io->cmd;
-	MPT_ADAPTER 	*ioc = hd->ioc;
+	u8		 cmd = io->cmd;
+	MPT_ADAPTER *ioc = hd->ioc;
+	int		 ret = 0;
+	unsigned long	 timeleft;
+	unsigned long	 flags;
 
-	in_isr = in_interrupt();
-	if (in_isr) {
-		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Internal SCSI IO request not allowed in ISR context!\n",
-					ioc->name));
-		return -EPERM;
+	/* don't send internal command during diag reset */
+	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+	if (ioc->ioc_reset_in_progress) {
+		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+			"%s: busy with host reset\n", ioc->name, __func__));
+		return MPT_SCANDV_BUSY;
 	}
+	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
+	mutex_lock(&ioc->internal_cmds.mutex);
 
 	/* Set command specific information
 	 */
@@ -3055,13 +2817,13 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 		CDB[4] = io->size;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case TEST_UNIT_READY:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case START_STOP:
@@ -3069,7 +2831,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 		CDB[4] = 1;	/*Spin up the disk */
-		cmdTimeout = 15;
+		timeout = 15;
 		break;
 
 	case REQUEST_SENSE:
@@ -3077,7 +2839,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		CDB[0] = cmd;
 		CDB[4] = io->size;
 		dir = MPI_SCSIIO_CONTROL_READ;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case READ_BUFFER:
@@ -3096,7 +2858,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		CDB[6] = (io->size >> 16) & 0xFF;
 		CDB[7] = (io->size >>  8) & 0xFF;
 		CDB[8] = io->size & 0xFF;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case WRITE_BUFFER:
@@ -3111,21 +2873,21 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		CDB[6] = (io->size >> 16) & 0xFF;
 		CDB[7] = (io->size >>  8) & 0xFF;
 		CDB[8] = io->size & 0xFF;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case RESERVE:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case RELEASE:
 		cmdLen = 6;
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	case SYNCHRONIZE_CACHE:
@@ -3133,20 +2895,23 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 		dir = MPI_SCSIIO_CONTROL_READ;
 		CDB[0] = cmd;
 //		CDB[1] = 0x02;	/* set immediate bit */
-		cmdTimeout = 10;
+		timeout = 10;
 		break;
 
 	default:
 		/* Error Case */
-		return -EFAULT;
+		ret = -EFAULT;
+		goto out;
 	}
 
 	/* Get and Populate a free Frame
+	 * MsgContext set in mpt_get_msg_frame call
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
-		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "No msg frames!\n",
-		    ioc->name));
-		return -EBUSY;
+		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
+		    ioc->name, __func__));
+		ret = MPT_SCANDV_BUSY;
+		goto out;
 	}
 
 	pScsiReq = (SCSIIORequest_t *) mf;
@@ -3172,7 +2937,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 
 	pScsiReq->Reserved = 0;
 
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	/* MsgContext set in mpt_get_msg_fram call  */
 
 	int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
@@ -3184,74 +2949,58 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 
 	if (cmd == REQUEST_SENSE) {
 		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
-		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Untagged! 0x%2x\n",
-			ioc->name, cmd));
+		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
 	}
 
-	for (ii=0; ii < 16; ii++)
+	for (ii = 0; ii < 16; ii++)
 		pScsiReq->CDB[ii] = CDB[ii];
 
 	pScsiReq->DataLength = cpu_to_le32(io->size);
 	pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
 					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));
 
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
-			ioc->name, cmd, io->channel, io->id, io->lun));
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+	    "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%d\n",
+	    ioc->name, __func__, cmd, io->channel, io->id, io->lun));
 
-	if (dir == MPI_SCSIIO_CONTROL_READ) {
-		mpt_add_sge((char *) &pScsiReq->SGL,
-			MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
-			io->data_dma);
-	} else {
-		mpt_add_sge((char *) &pScsiReq->SGL,
-			MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
-			io->data_dma);
-	}
-
-	/* The ISR will free the request frame, but we need
-	 * the information to initialize the target. Duplicate.
-	 */
-	memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
-
-	/* Issue this command after:
-	 *	finish init
-	 *	add timer
-	 * Wait until the reply has been received
-	 *  ScsiScanDvCtx callback function will
-	 *	set hd->pLocal;
-	 *	set scandv_wait_done and call wake_up
-	 */
-	hd->pLocal = NULL;
-	hd->timer.expires = jiffies + HZ*cmdTimeout;
-	hd->scandv_wait_done = 0;
-
-	/* Save cmd pointer, for resource free if timeout or
-	 * FW reload occurs
-	 */
-	hd->cmdPtr = mf;
+	if (dir == MPI_SCSIIO_CONTROL_READ)
+		ioc->add_sge((char *) &pScsiReq->SGL,
+		    MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
+	else
+		ioc->add_sge((char *) &pScsiReq->SGL,
+		    MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
 
-	add_timer(&hd->timer);
+	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
-	wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
-	if (hd->pLocal) {
-		rc = hd->pLocal->completion;
-		hd->pLocal->skip = 0;
-
-		/* Always set fatal error codes in some cases.
-		 */
-		if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
-			rc = -ENXIO;
-		else if (rc == MPT_SCANDV_SOME_ERROR)
-			rc =  -rc;
-	} else {
-		rc = -EFAULT;
-		/* This should never happen. */
-		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "_do_cmd: Null pLocal!!!\n",
-				ioc->name));
+	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = MPT_SCANDV_DID_RESET;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+		    "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
+		    cmd));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+			mpt_free_msg_frame(ioc, mf);
+			goto out;
+		}
+		if (!timeleft) {
+			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
 	}
 
-	return rc;
+	ret = ioc->internal_cmds.completion_code;
+	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
+			ioc->name, __func__, ret));
+
+ out:
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	mutex_unlock(&ioc->internal_cmds.mutex);
+	return ret;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -3491,6 +3240,7 @@ struct device_attribute *mptscsih_host_attrs[] = {
 	&dev_attr_debug_level,
 	NULL,
 };
+
 EXPORT_SYMBOL(mptscsih_host_attrs);
 
 EXPORT_SYMBOL(mptscsih_remove);
@@ -3516,6 +3266,5 @@ EXPORT_SYMBOL(mptscsih_event_process);
 EXPORT_SYMBOL(mptscsih_ioc_reset);
 EXPORT_SYMBOL(mptscsih_change_queue_depth);
 EXPORT_SYMBOL(mptscsih_timer_expired);
-EXPORT_SYMBOL(mptscsih_TMHandler);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 319aa303337..eb3f677528a 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -60,6 +60,7 @@
 #define MPT_SCANDV_SELECTION_TIMEOUT	(0x00000008)
 #define MPT_SCANDV_ISSUE_SENSE		(0x00000010)
 #define MPT_SCANDV_FALLBACK		(0x00000020)
+#define MPT_SCANDV_BUSY			(0x00000040)
 
 #define MPT_SCANDV_MAX_RETRIES		(10)
 
@@ -89,6 +90,7 @@
 
 #endif
 
+
 typedef struct _internal_cmd {
 	char		*data;		/* data pointer */
 	dma_addr_t	data_dma;	/* data dma address */
@@ -112,6 +114,8 @@ extern int mptscsih_resume(struct pci_dev *pdev);
 extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
 extern const char * mptscsih_info(struct Scsi_Host *SChost);
 extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
+extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
+	u8 id, int lun, int ctx2abort, ulong timeout);
 extern void mptscsih_slave_destroy(struct scsi_device *device);
 extern int mptscsih_slave_configure(struct scsi_device *device);
 extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
@@ -126,7 +130,8 @@ extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE
 extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
 extern void mptscsih_timer_expired(unsigned long data);
-extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
 extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern struct device_attribute *mptscsih_host_attrs[];
+extern struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 61620144e49..c5b808fd55b 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -300,7 +300,7 @@ mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
 		(IOCPage4Ptr->Header.PageLength + ii) * 4;
 
-	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
 
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
@@ -614,19 +614,24 @@ static void mptspi_read_parameters(struct scsi_target *starget)
 	spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
 }
 
-static int
+int
 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
 {
+	MPT_ADAPTER	*ioc = hd->ioc;
 	MpiRaidActionRequest_t	*pReq;
 	MPT_FRAME_HDR		*mf;
-	MPT_ADAPTER *ioc = hd->ioc;
+	int			ret;
+	unsigned long 	 	timeleft;
+
+	mutex_lock(&ioc->internal_cmds.mutex);
 
 	/* Get and Populate a free Frame
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
-		ddvprintk(ioc, printk(MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
-					ioc->name));
-		return -EAGAIN;
+		dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
+			"%s: no msg frames!\n", ioc->name, __func__));
+		ret = -EAGAIN;
+		goto out;
 	}
 	pReq = (MpiRaidActionRequest_t *)mf;
 	if (quiesce)
@@ -643,29 +648,36 @@ mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
 	pReq->Reserved2 = 0;
 	pReq->ActionDataWord = 0; /* Reserved for this action */
 
-	mpt_add_sge((char *)&pReq->ActionDataSGE,
+	ioc->add_sge((char *)&pReq->ActionDataSGE,
 		MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
 
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
 			ioc->name, pReq->Action, channel, id));
 
-	hd->pLocal = NULL;
-	hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
-	hd->scandv_wait_done = 0;
-
-	/* Save cmd pointer, for resource free if timeout or
-	 * FW reload occurs
-	 */
-	hd->cmdPtr = mf;
-
-	add_timer(&hd->timer);
+	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
-	wait_event(hd->scandv_waitq, hd->scandv_wait_done);
+	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
+	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+		ret = -ETIME;
+		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
+		    ioc->name, __func__));
+		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+			goto out;
+		if (!timeleft) {
+			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+			    ioc->name, __func__);
+			mpt_HardResetHandler(ioc, CAN_SLEEP);
+			mpt_free_msg_frame(ioc, mf);
+		}
+		goto out;
+	}
 
-	if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0))
-		return -1;
+	ret = ioc->internal_cmds.completion_code;
 
-	return 0;
+ out:
+	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+	mutex_unlock(&ioc->internal_cmds.mutex);
+	return ret;
 }
 
 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
@@ -1423,17 +1435,15 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * A slightly different algorithm is required for
 	 * 64bit SGEs.
 	 */
-	scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	scale = ioc->req_sz/ioc->SGE_size;
+	if (ioc->sg_addr_size == sizeof(u64)) {
 		numSGE = (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 60) / ioc->SGE_size;
 	} else {
 		numSGE = 1 + (scale - 1) *
 		  (ioc->facts.MaxChainDepth-1) + scale +
-		  (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
-		  sizeof(u32));
+		  (ioc->req_sz - 64) / ioc->SGE_size;
 	}
 
 	if (numSGE < sh->sg_tablesize) {
@@ -1464,9 +1474,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Clear the TM flags
 	 */
-	hd->tmPending = 0;
-	hd->tmState = TM_STATE_NONE;
-	hd->resetPending = 0;
 	hd->abortSCpnt = NULL;
 
 	/* Clear the pointer used to store
@@ -1493,8 +1500,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		mpt_saf_te));
 	ioc->spi_data.noQas = 0;
 
-	init_waitqueue_head(&hd->scandv_waitq);
-	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
 	hd->spi_pending = 0;
 
@@ -1514,7 +1519,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * issue internal bus reset
 	 */
 	if (ioc->spi_data.bus_reset)
-		mptscsih_TMHandler(hd,
+		mptscsih_IssueTaskMgmt(hd,
 		    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
 		    0, 0, 0, 0, 5);
 
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index a443e136dc4..335d4c78a77 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -426,15 +426,9 @@ static void i2o_block_end_request(struct request *req, int error,
 	struct request_queue *q = req->q;
 	unsigned long flags;
 
-	if (blk_end_request(req, error, nr_bytes)) {
-		int leftover = (req->hard_nr_sectors << KERNEL_SECTOR_SHIFT);
-
-		if (blk_pc_request(req))
-			leftover = req->data_len;
-
+	if (blk_end_request(req, error, nr_bytes))
 		if (error)
-			blk_end_request(req, -EIO, leftover);
-	}
+			blk_end_request_all(req, -EIO);
 
 	spin_lock_irqsave(q->queue_lock, flags);
 
@@ -761,7 +755,7 @@ static int i2o_block_transfer(struct request *req)
 			break;
 
 		case CACHE_SMARTFETCH:
-			if (req->nr_sectors > 16)
+			if (blk_rq_sectors(req) > 16)
 				ctl_flags = 0x201F0008;
 			else
 				ctl_flags = 0x001F0000;
@@ -781,13 +775,13 @@ static int i2o_block_transfer(struct request *req)
 			ctl_flags = 0x001F0010;
 			break;
 		case CACHE_SMARTBACK:
-			if (req->nr_sectors > 16)
+			if (blk_rq_sectors(req) > 16)
 				ctl_flags = 0x001F0004;
 			else
 				ctl_flags = 0x001F0010;
 			break;
 		case CACHE_SMARTTHROUGH:
-			if (req->nr_sectors > 16)
+			if (blk_rq_sectors(req) > 16)
 				ctl_flags = 0x001F0004;
 			else
 				ctl_flags = 0x001F0010;
@@ -800,8 +794,9 @@ static int i2o_block_transfer(struct request *req)
 	if (c->adaptec) {
 		u8 cmd[10];
 		u32 scsi_flags;
-		u16 hwsec = queue_hardsect_size(req->q) >> KERNEL_SECTOR_SHIFT;
+		u16 hwsec;
 
+		hwsec = queue_logical_block_size(req->q) >> KERNEL_SECTOR_SHIFT;
 		memset(cmd, 0, 10);
 
 		sgl_offset = SGL_OFFSET_12;
@@ -827,22 +822,22 @@ static int i2o_block_transfer(struct request *req)
 
 		*mptr++ = cpu_to_le32(scsi_flags);
 
-		*((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec);
-		*((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec);
+		*((u32 *) & cmd[2]) = cpu_to_be32(blk_rq_pos(req) * hwsec);
+		*((u16 *) & cmd[7]) = cpu_to_be16(blk_rq_sectors(req) * hwsec);
 
 		memcpy(mptr, cmd, 10);
 		mptr += 4;
-		*mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT);
+		*mptr++ = cpu_to_le32(blk_rq_bytes(req));
 	} else
 #endif
 	{
 		msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid);
 		*mptr++ = cpu_to_le32(ctl_flags);
-		*mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT);
+		*mptr++ = cpu_to_le32(blk_rq_bytes(req));
 		*mptr++ =
-		    cpu_to_le32((u32) (req->sector << KERNEL_SECTOR_SHIFT));
+		    cpu_to_le32((u32) (blk_rq_pos(req) << KERNEL_SECTOR_SHIFT));
 		*mptr++ =
-		    cpu_to_le32(req->sector >> (32 - KERNEL_SECTOR_SHIFT));
+		    cpu_to_le32(blk_rq_pos(req) >> (32 - KERNEL_SECTOR_SHIFT));
 	}
 
 	if (!i2o_block_sglist_alloc(c, ireq, &mptr)) {
@@ -883,7 +878,7 @@ static void i2o_block_request_fn(struct request_queue *q)
 	struct request *req;
 
 	while (!blk_queue_plugged(q)) {
-		req = elv_next_request(q);
+		req = blk_peek_request(q);
 		if (!req)
 			break;
 
@@ -896,7 +891,7 @@ static void i2o_block_request_fn(struct request_queue *q)
 
 			if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) {
 				if (!i2o_block_transfer(req)) {
-					blkdev_dequeue_request(req);
+					blk_start_request(req);
 					continue;
 				} else
 					osm_info("transfer error\n");
@@ -922,8 +917,10 @@ static void i2o_block_request_fn(struct request_queue *q)
 				blk_stop_queue(q);
 				break;
 			}
-		} else
-			end_request(req, 0);
+		} else {
+			blk_start_request(req);
+			__blk_end_request_all(req, -EIO);
+		}
 	}
 };
 
@@ -1082,7 +1079,7 @@ static int i2o_block_probe(struct device *dev)
 	 */
 	if (!i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) ||
 	    !i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) {
-		blk_queue_hardsect_size(queue, le32_to_cpu(blocksize));
+		blk_queue_logical_block_size(queue, le32_to_cpu(blocksize));
 	} else
 		osm_warn("unable to get blocksize of %s\n", gd->disk_name);
 
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 7793932a513..11a6248cc1c 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
 	dev_dbg(pcf->dev, "pcf50633_irq\n");
 
 	get_device(pcf->dev);
-	disable_irq(pcf->irq);
+	disable_irq_nosync(pcf->irq);
 	schedule_work(&pcf->irq_work);
 
 	return IRQ_HANDLED;
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index e9f4323dd2c..875f7a87573 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+static const struct tmio_mmc_data t7166xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static const struct resource t7l66xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = t7l66xb_mmc_enable,
 		.disable = t7l66xb_mmc_disable,
+		.driver_data = &t7166xb_mmc_data,
 		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
 		.resources = t7l66xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 43222c12fec..c3993ac2054 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+const static struct tmio_mmc_data tc6387xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource tc6387xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = tc6387xb_mmc_enable,
 		.disable = tc6387xb_mmc_disable,
+		.driver_data = &tc6387xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
 		.resources = tc6387xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 77a12fc8045..9d2abb5d6e2 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 	return 0;
 }
 
+const static struct tmio_mmc_data tc6393xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
 		.start	= 0x1000,
@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	},
 	[TC6393XB_CELL_MMC] = {
 		.name = "tmio-mmc",
+		.driver_data = &tc6393xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
 		.resources = tc6393xb_mmc_resources,
 	},
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index c2be3088e2e..fe24079387c 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
 		/* Cache is CPU endian */
 		dest[i - reg] = be16_to_cpu(dest[i - reg]);
 
-		/* Satisfy non-volatile bits from cache */
-		dest[i - reg] &= wm8350_reg_io_map[i].vol;
-		dest[i - reg] |= wm8350->reg_cache[i];
-
 		/* Mask out non-readable bits */
 		dest[i - reg] &= wm8350_reg_io_map[i].readable;
 	}
@@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
 			(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
 			| src[i - reg];
 
-		/* Don't store volatile bits */
-		wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
-
 		src[i - reg] = cpu_to_be16(src[i - reg]);
 	}
 
@@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
 		    (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
 			value = be16_to_cpu(wm8350->reg_cache[i]);
 			value &= wm8350_reg_io_map[i].readable;
-			value &= ~wm8350_reg_io_map[i].vol;
 			wm8350->reg_cache[i] = value;
 		} else
 			wm8350->reg_cache[i] = reg_map[i];
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6d1ac180f6e..68ab39d7cb3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -235,5 +235,6 @@ config ISL29003
 
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7871f05dcb9..36f733cd60e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-y				+= eeprom/
+obj-y				+= cb710/
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
new file mode 100644
index 00000000000..22429b8b106
--- /dev/null
+++ b/drivers/misc/cb710/Kconfig
@@ -0,0 +1,25 @@
+config CB710_CORE
+	tristate "ENE CB710/720 Flash memory card reader support"
+	depends on PCI
+	help
+	  This option enables support for PCI ENE CB710/720 Flash memory card
+	  reader found in some laptops (ie. some versions of HP Compaq nx9500).
+
+	  You will also have to select some flash card format drivers (MMC/SD,
+	  MemoryStick).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710.
+
+config CB710_DEBUG
+	bool "Enable driver debugging"
+	depends on CB710_CORE != n
+	default n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This adds a lot of debugging output to dmesg.
+
+config CB710_DEBUG_ASSUMPTIONS
+	bool
+	depends on CB710_CORE != n
+	default y
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
new file mode 100644
index 00000000000..7b80cbf1a60
--- /dev/null
+++ b/drivers/misc/cb710/Makefile
@@ -0,0 +1,8 @@
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
+obj-$(CONFIG_CB710_CORE)	+= cb710.o
+
+cb710-y				:= core.o sgbuf2.o
+cb710-$(CONFIG_CB710_DEBUG)	+= debug.o
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
new file mode 100644
index 00000000000..b14eab0f2ba
--- /dev/null
+++ b/drivers/misc/cb710/core.c
@@ -0,0 +1,357 @@
+/*
+ *  cb710/core.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/cb710.h>
+
+static DEFINE_IDA(cb710_ida);
+static DEFINE_SPINLOCK(cb710_ida_lock);
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t mask, uint32_t xor)
+{
+	u32 rval;
+
+	pci_read_config_dword(pdev, reg, &rval);
+	rval = (rval & mask) ^ xor;
+	pci_write_config_dword(pdev, reg, rval);
+}
+EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
+
+/* Some magic writes based on Windows driver init code */
+static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+{
+	unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+	struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+	u32 val;
+
+	cb710_pci_update_config_reg(pdev, 0x48,
+		~0x000000FF, 0x0000003F);
+
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (val & 0x80000000)
+		return 0;
+
+	if (!pdev0)
+		return -ENODEV;
+
+	if (pdev0->vendor == PCI_VENDOR_ID_ENE
+	    && pdev0->device == PCI_DEVICE_ID_ENE_720) {
+		cb710_pci_update_config_reg(pdev0, 0x8C,
+			~0x00F00000, 0x00100000);
+		cb710_pci_update_config_reg(pdev0, 0xB0,
+			~0x08000000, 0x08000000);
+	}
+
+	cb710_pci_update_config_reg(pdev0, 0x8C,
+		~0x00000F00, 0x00000200);
+	cb710_pci_update_config_reg(pdev0, 0x90,
+		~0x00060000, 0x00040000);
+
+	pci_dev_put(pdev0);
+
+	return 0;
+}
+
+static irqreturn_t cb710_irq_handler(int irq, void *data)
+{
+	struct cb710_chip *chip = data;
+	struct cb710_slot *slot = &chip->slot[0];
+	irqreturn_t handled = IRQ_NONE;
+	unsigned nr;
+
+	spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
+
+	for (nr = chip->slots; nr; ++slot, --nr) {
+		cb710_irq_handler_t handler_func = slot->irq_handler;
+		if (handler_func && handler_func(slot))
+			handled = IRQ_HANDLED;
+	}
+
+	spin_unlock(&chip->irq_lock);
+
+	return handled;
+}
+
+static void cb710_release_slot(struct device *dev)
+{
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+
+	/* slot struct can be freed now */
+	atomic_dec(&chip->slot_refs_count);
+#endif
+}
+
+static int __devinit cb710_register_slot(struct cb710_chip *chip,
+	unsigned slot_mask, unsigned io_offset, const char *name)
+{
+	int nr = chip->slots;
+	struct cb710_slot *slot = &chip->slot[nr];
+	int err;
+
+	dev_dbg(cb710_chip_dev(chip),
+		"register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
+		name, chip->platform_id, nr, slot_mask, io_offset);
+
+	/* slot->irq_handler == NULL here; this needs to be
+	 * seen before platform_device_register() */
+	++chip->slots;
+	smp_wmb();
+
+	slot->iobase = chip->iobase + io_offset;
+	slot->pdev.name = name;
+	slot->pdev.id = chip->platform_id;
+	slot->pdev.dev.parent = &chip->pdev->dev;
+	slot->pdev.dev.release = cb710_release_slot;
+
+	err = platform_device_register(&slot->pdev);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_inc(&chip->slot_refs_count);
+#endif
+
+	if (err) {
+		/* device_initialize() called from platform_device_register()
+		 * wants this on error path */
+		platform_device_put(&slot->pdev);
+
+		/* slot->irq_handler == NULL here anyway, so no lock needed */
+		--chip->slots;
+		return err;
+	}
+
+	chip->slot_mask |= slot_mask;
+
+	return 0;
+}
+
+static void cb710_unregister_slot(struct cb710_chip *chip,
+	unsigned slot_mask)
+{
+	int nr = chip->slots - 1;
+
+	if (!(chip->slot_mask & slot_mask))
+		return;
+
+	platform_device_unregister(&chip->slot[nr].pdev);
+
+	/* complementary to spin_unlock() in cb710_set_irq_handler() */
+	smp_rmb();
+	BUG_ON(chip->slot[nr].irq_handler != NULL);
+
+	/* slot->irq_handler == NULL here, so no lock needed */
+	--chip->slots;
+	chip->slot_mask &= ~slot_mask;
+}
+
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler)
+{
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	slot->irq_handler = handler;
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
+
+#ifdef CONFIG_PM
+
+static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+
+	free_irq(pdev->irq, chip);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	if (state.event & PM_EVENT_SLEEP)
+		pci_set_power_state(pdev, PCI_D3cold);
+	return 0;
+}
+
+static int cb710_resume(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	return devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct cb710_chip *chip;
+	unsigned long flags;
+	u32 val;
+	int err;
+	int n = 0;
+
+	err = cb710_pci_configure(pdev);
+	if (err)
+		return err;
+
+	/* this is actually magic... */
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (!(val & 0x80000000)) {
+		pci_write_config_dword(pdev, 0x48, val|0x71000000);
+		pci_read_config_dword(pdev, 0x48, &val);
+	}
+
+	dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
+	if (!(val & 0x70000000))
+		return -ENODEV;
+	val = (val >> 28) & 7;
+	if (val & CB710_SLOT_MMC)
+		++n;
+	if (val & CB710_SLOT_MS)
+		++n;
+	if (val & CB710_SLOT_SM)
+		++n;
+
+	chip = devm_kzalloc(&pdev->dev,
+		sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
+	if (err)
+		return err;
+
+	chip->pdev = pdev;
+	chip->iobase = pcim_iomap_table(pdev)[0];
+
+	pci_set_drvdata(pdev, chip);
+
+	err = devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (err)
+		return err;
+
+	do {
+		if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
+			return -ENOMEM;
+
+		spin_lock_irqsave(&cb710_ida_lock, flags);
+		err = ida_get_new(&cb710_ida, &chip->platform_id);
+		spin_unlock_irqrestore(&cb710_ida_lock, flags);
+
+		if (err && err != -EAGAIN)
+			return err;
+	} while (err);
+
+
+	dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
+		chip->platform_id, chip->iobase, pdev->irq);
+
+	if (val & CB710_SLOT_MMC) {	/* MMC/SD slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MMC, 0x00, "cb710-mmc");
+		if (err)
+			return err;
+	}
+
+	if (val & CB710_SLOT_MS) {	/* MemoryStick slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MS, 0x40, "cb710-ms");
+		if (err)
+			goto unreg_mmc;
+	}
+
+	if (val & CB710_SLOT_SM) {	/* SmartMedia slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_SM, 0x60, "cb710-sm");
+		if (err)
+			goto unreg_ms;
+	}
+
+	return 0;
+unreg_ms:
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+unreg_mmc:
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+	return err;
+}
+
+static void __devexit cb710_remove_one(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	cb710_unregister_slot(chip, CB710_SLOT_SM);
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+
+	spin_lock_irqsave(&cb710_ida_lock, flags);
+	ida_remove(&cb710_ida, chip->platform_id);
+	spin_unlock_irqrestore(&cb710_ida_lock, flags);
+}
+
+static const struct pci_device_id cb710_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }
+};
+
+static struct pci_driver cb710_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = cb710_pci_tbl,
+	.probe = cb710_probe,
+	.remove = __devexit_p(cb710_remove_one),
+#ifdef CONFIG_PM
+	.suspend = cb710_suspend,
+	.resume = cb710_resume,
+#endif
+};
+
+static int __init cb710_init_module(void)
+{
+	return pci_register_driver(&cb710_driver);
+}
+
+static void __exit cb710_cleanup_module(void)
+{
+	pci_unregister_driver(&cb710_driver);
+	ida_destroy(&cb710_ida);
+}
+
+module_init(cb710_init_module);
+module_exit(cb710_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c
new file mode 100644
index 00000000000..02358d086e0
--- /dev/null
+++ b/drivers/misc/cb710/debug.c
@@ -0,0 +1,119 @@
+/*
+ *  cb710/debug.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cb710.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CB710_REG_COUNT		0x80
+
+static const u16 allow[CB710_REG_COUNT/16] = {
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+};
+static const char *const prefix[ARRAY_SIZE(allow)] = {
+	"MMC", "MMC", "MMC", "MMC",
+	"MS?", "MS?", "SM?", "SM?"
+};
+
+static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
+{
+	unsigned mask = (1 << bits/8) - 1;
+	offset *= bits/8;
+	return ((allow[block] >> offset) & mask) == mask;
+}
+
+#define CB710_READ_REGS_TEMPLATE(t)					\
+static void cb710_read_regs_##t(void __iomem *iobase,			\
+	u##t *reg, unsigned select)					\
+{									\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))					\
+			continue;					\
+									\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			if (!allow_reg_read(i, j, t))			\
+				continue;				\
+			reg[j] = ioread##t(iobase			\
+				+ (i << 4) + (j * (t/8)));		\
+		}							\
+	}								\
+}
+
+static const char cb710_regf_8[] = "%02X";
+static const char cb710_regf_16[] = "%04X";
+static const char cb710_regf_32[] = "%08X";
+static const char cb710_xes[] = "xxxxxxxx";
+
+#define CB710_DUMP_REGS_TEMPLATE(t)					\
+static void cb710_dump_regs_##t(struct device *dev,			\
+	const u##t *reg, unsigned select)				\
+{									\
+	const char *const xp = &cb710_xes[8 - t/4];			\
+	const char *const format = cb710_regf_##t;			\
+									\
+	char msg[100], *p;						\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))				\
+			continue;					\
+		p = msg;						\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			*p++ = ' ';					\
+			if (j == 8/(t/8))				\
+				*p++ = ' ';				\
+			if (allow_reg_read(i, j, t))			\
+				p += sprintf(p, format, reg[j]);	\
+			else						\
+				p += sprintf(p, "%s", xp);		\
+		}							\
+		dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg);	\
+	}								\
+}
+
+#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t)				\
+static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip,	\
+	unsigned select)						\
+{									\
+	u##t regs[CB710_REG_COUNT/sizeof(u##t)];			\
+									\
+	memset(&regs, 0, sizeof(regs));					\
+	cb710_read_regs_##t(chip->iobase, regs, select);		\
+	cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select);	\
+}
+
+#define CB710_REG_ACCESS_TEMPLATES(t)		\
+  CB710_READ_REGS_TEMPLATE(t)			\
+  CB710_DUMP_REGS_TEMPLATE(t)			\
+  CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
+
+CB710_REG_ACCESS_TEMPLATES(8)
+CB710_REG_ACCESS_TEMPLATES(16)
+CB710_REG_ACCESS_TEMPLATES(32)
+
+void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
+{
+	if (!(select & CB710_DUMP_REGS_MASK))
+		select = CB710_DUMP_REGS_ALL;
+	if (!(select & CB710_DUMP_ACCESS_MASK))
+		select |= CB710_DUMP_ACCESS_8;
+
+	if (select & CB710_DUMP_ACCESS_32)
+		cb710_read_and_dump_regs_32(chip, select);
+	if (select & CB710_DUMP_ACCESS_16)
+		cb710_read_and_dump_regs_16(chip, select);
+	if (select & CB710_DUMP_ACCESS_8)
+		cb710_read_and_dump_regs_8(chip, select);
+}
+EXPORT_SYMBOL_GPL(cb710_dump_regs);
+
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
new file mode 100644
index 00000000000..d38a7acdb6e
--- /dev/null
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -0,0 +1,150 @@
+/*
+ *  cb710/sgbuf2.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cb710.h>
+
+static bool sg_dwiter_next(struct sg_mapping_iter *miter)
+{
+	if (sg_miter_next(miter)) {
+		miter->consumed = 0;
+		return true;
+	} else
+		return false;
+}
+
+static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
+{
+	return miter->length == miter->consumed && !sg_dwiter_next(miter);
+}
+
+static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
+{
+	size_t len, left = 4;
+	uint32_t data;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(addr, miter->addr + miter->consumed, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return data;
+		addr += len;
+	} while (sg_dwiter_next(miter));
+
+	memset(addr, 0, left);
+	return data;
+}
+
+static inline bool needs_unaligned_copy(const void *ptr)
+{
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+	return false;
+#else
+	return ((ptr - NULL) & 3) != 0;
+#endif
+}
+
+static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
+{
+	size_t len;
+
+	if (sg_dwiter_is_at_end(miter))
+		return true;
+
+	len = miter->length - miter->consumed;
+
+	if (likely(len >= 4 && !needs_unaligned_copy(
+			miter->addr + miter->consumed))) {
+		*ptr = miter->addr + miter->consumed;
+		miter->consumed += 4;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
+ * @miter: sg mapping iterator used for reading
+ *
+ * Description:
+ *   Returns 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes past the buffer's end
+ *   are not accessed (read) but are returned as zeroes.  @miter@
+ *   is advanced by 4 bytes or to the end of buffer whichever is
+ *   closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ *
+ * Returns:
+ *   32-bit word just read.
+ */
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr)))
+		return ptr ? *ptr : 0;
+
+	return sg_dwiter_read_buffer(miter);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
+
+static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
+{
+	size_t len, left = 4;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(miter->addr, addr, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return;
+		addr += len;
+		flush_kernel_dcache_page(miter->page);
+	} while (sg_dwiter_next(miter));
+}
+
+/**
+ * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
+ * @miter: sg mapping iterator used for writing
+ *
+ * Description:
+ *   Writes 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes which would be written
+ *   past the buffer's end are silently discarded. @miter@ is
+ *   advanced by 4 bytes or to the end of buffer whichever is closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ */
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
+		if (ptr)
+			*ptr = data;
+		else
+			return;
+	} else
+		sg_dwiter_write_slow(miter, data);
+
+	if (miter->length == miter->consumed)
+		flush_kernel_dcache_page(miter->page);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
+
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 3cf61ece71d..348443bdb23 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components,
 	edev->edev.class = &enclosure_class;
 	edev->edev.parent = get_device(dev);
 	edev->cb = cb;
-	dev_set_name(&edev->edev, name);
+	dev_set_name(&edev->edev, "%s", name);
 	err = device_register(&edev->edev);
 	if (err)
 		goto err;
@@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev,
 	ecomp->number = number;
 	cdev = &ecomp->cdev;
 	cdev->parent = get_device(&edev->edev);
-	if (name)
-		dev_set_name(cdev, name);
+	if (name && name[0])
+		dev_set_name(cdev, "%s", name);
 	else
 		dev_set_name(cdev, "%u", number);
 
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index b25e9b6516a..adc205c49fb 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -147,7 +147,8 @@ struct mmc_blk_request {
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 {
 	int err;
-	__be32 blocks;
+	u32 result;
+	__be32 *blocks;
 
 	struct mmc_request mrq;
 	struct mmc_command cmd;
@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	mrq.cmd = &cmd;
 	mrq.data = &data;
 
-	sg_init_one(&sg, &blocks, 4);
+	blocks = kmalloc(4, GFP_KERNEL);
+	if (!blocks)
+		return (u32)-1;
+
+	sg_init_one(&sg, blocks, 4);
 
 	mmc_wait_for_req(card->host, &mrq);
 
+	result = ntohl(*blocks);
+	kfree(blocks);
+
 	if (cmd.error || data.error)
-		return (u32)-1;
+		result = (u32)-1;
 
-	return ntohl(blocks);
+	return result;
 }
 
 static u32 get_card_status(struct mmc_card *card, struct request *req)
@@ -243,7 +251,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.mrq.cmd = &brq.cmd;
 		brq.mrq.data = &brq.data;
 
-		brq.cmd.arg = req->sector;
+		brq.cmd.arg = blk_rq_pos(req);
 		if (!mmc_card_blockaddr(card))
 			brq.cmd.arg <<= 9;
 		brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -251,7 +259,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.stop.opcode = MMC_STOP_TRANSMISSION;
 		brq.stop.arg = 0;
 		brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
-		brq.data.blocks = req->nr_sectors;
+		brq.data.blocks = blk_rq_sectors(req);
 
 		/*
 		 * The block layer doesn't support all sector count
@@ -301,7 +309,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		 * Adjust the sg list so it is the same size as the
 		 * request.
 		 */
-		if (brq.data.blocks != req->nr_sectors) {
+		if (brq.data.blocks != blk_rq_sectors(req)) {
 			int i, data_size = brq.data.blocks << 9;
 			struct scatterlist *sg;
 
@@ -352,8 +360,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			printk(KERN_ERR "%s: error %d transferring data,"
 			       " sector %u, nr %u, card status %#x\n",
 			       req->rq_disk->disk_name, brq.data.error,
-			       (unsigned)req->sector,
-			       (unsigned)req->nr_sectors, status);
+			       (unsigned)blk_rq_pos(req),
+			       (unsigned)blk_rq_sectors(req), status);
 		}
 
 		if (brq.stop.error) {
@@ -521,7 +529,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 
 	sprintf(md->disk->disk_name, "mmcblk%d", devidx);
 
-	blk_queue_hardsect_size(md->queue.queue, 512);
+	blk_queue_logical_block_size(md->queue.queue, 512);
 
 	if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
 		/*
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 7a72e75d5c6..49e582356c6 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -55,7 +55,7 @@ static int mmc_queue_thread(void *d)
 		spin_lock_irq(q->queue_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (!blk_queue_plugged(q))
-			req = elv_next_request(q);
+			req = blk_fetch_request(q);
 		mq->req = req;
 		spin_unlock_irq(q->queue_lock);
 
@@ -88,16 +88,11 @@ static void mmc_request(struct request_queue *q)
 {
 	struct mmc_queue *mq = q->queuedata;
 	struct request *req;
-	int ret;
 
 	if (!mq) {
 		printk(KERN_ERR "MMC: killing requests for dead queue\n");
-		while ((req = elv_next_request(q)) != NULL) {
-			do {
-				ret = __blk_end_request(req, -EIO,
-							blk_rq_cur_bytes(req));
-			} while (ret);
-		}
+		while ((req = blk_fetch_request(q)) != NULL)
+			__blk_end_request_all(req, -EIO);
 		return;
 	}
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 26491173275..d84c880fac8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host)
 	 */
 	mmc_delay(10);
 
-	host->ios.clock = host->f_min;
+	if (host->f_min > 400000) {
+		pr_warning("%s: Minimum clock frequency too high for "
+				"identification mode\n", mmc_hostname(host));
+		host->ios.clock = host->f_min;
+	} else
+		host->ios.clock = 400000;
+
 	host->ios.power_mode = MMC_POWER_ON;
 	mmc_set_ios(host);
 
@@ -855,61 +861,72 @@ void mmc_rescan(struct work_struct *work)
 
 	mmc_bus_get(host);
 
-	if (host->bus_ops == NULL) {
-		/*
-		 * Only we can add a new handler, so it's safe to
-		 * release the lock here.
-		 */
+	/* if there is a card registered, check whether it is still present */
+	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+		host->bus_ops->detect(host);
+
+	mmc_bus_put(host);
+
+
+	mmc_bus_get(host);
+
+	/* if there still is a card present, stop here */
+	if (host->bus_ops != NULL) {
 		mmc_bus_put(host);
+		goto out;
+	}
 
-		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
-			goto out;
+	/* detect a newly inserted card */
 
-		mmc_claim_host(host);
+	/*
+	 * Only we can add a new handler, so it's safe to
+	 * release the lock here.
+	 */
+	mmc_bus_put(host);
 
-		mmc_power_up(host);
-		mmc_go_idle(host);
+	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+		goto out;
 
-		mmc_send_if_cond(host, host->ocr_avail);
+	mmc_claim_host(host);
 
-		/*
-		 * First we search for SDIO...
-		 */
-		err = mmc_send_io_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sdio(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_power_up(host);
+	mmc_go_idle(host);
 
-		/*
-		 * ...then normal SD...
-		 */
-		err = mmc_send_app_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sd(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_send_if_cond(host, host->ocr_avail);
 
-		/*
-		 * ...and finally MMC.
-		 */
-		err = mmc_send_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_mmc(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	/*
+	 * First we search for SDIO...
+	 */
+	err = mmc_send_io_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sdio(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_release_host(host);
-		mmc_power_off(host);
-	} else {
-		if (host->bus_ops->detect && !host->bus_dead)
-			host->bus_ops->detect(host);
+	/*
+	 * ...then normal SD...
+	 */
+	err = mmc_send_app_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sd(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_bus_put(host);
+	/*
+	 * ...and finally MMC.
+	 */
+	err = mmc_send_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_mmc(host, ocr))
+			mmc_power_off(host);
+		goto out;
 	}
+
+	mmc_release_host(host);
+	mmc_power_off(host);
+
 out:
 	if (host->caps & MMC_CAP_NEEDS_POLL)
 		mmc_schedule_delayed_work(&host->detect, HZ);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691f3f6..40111a6d8d5 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -83,6 +83,17 @@ config MMC_SDHCI_OF
 
 	  If unsure, say N.
 
+config MMC_SDHCI_PLTFM
+	tristate "SDHCI support on the platform specific bus"
+	depends on MMC_SDHCI
+	help
+	  This selects the platform specific bus support for Secure Digital Host
+	  Controller Interface.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -155,7 +166,7 @@ config MMC_ATMELMCI_DMA
 
 config MMC_IMX
 	tristate "Motorola i.MX Multimedia Card Interface support"
-	depends on ARCH_IMX
+	depends on ARCH_MX1
 	help
 	  This selects the Motorola i.MX Multimedia card Interface.
 	  If you have a i.MX platform with a Multimedia Card slot,
@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS
 
 config MMC_TMIO
 	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-	depends on MFD_TMIO
+	depends on MFD_TMIO || MFD_ASIC3
 	help
 	  This provides support for the SD/MMC cell found in TC6393XB,
-	  T7L66XB and also ipaq ASIC3
+	  T7L66XB and also HTC ASIC3
+
+config MMC_CB710
+	tristate "ENE CB710 MMC/SD Interface support"
+	depends on PCI
+	select CB710_CORE
+	help
+	  This option enables support for MMC/SD part of ENE CB710/720 Flash
+	  memory card reader found in some laptops (ie. some versions of
+	  HP Compaq nx9500).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710-mmc.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 970a997620e..79da397c5fe 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -29,4 +30,8 @@ endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
 
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	CFLAGS-cb710-mmc	+= -DDEBUG
+endif
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index b58364ed6bb..fc8a0fe7c5c 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -7,6 +7,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
 #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
 #define __DRIVERS_MMC_ATMEL_MCI_H__
 
@@ -14,11 +20,17 @@
 #define MCI_CR			0x0000	/* Control */
 # define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
 # define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define MCI_CR_PWSEN		(  1 <<  2)	/* Power Save Enable */
+# define MCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
 # define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
 #define MCI_MR			0x0004	/* Mode */
 # define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
+# define MCI_MR_PWSDIV(x)	((x) <<  8)	/* Power Saving Divider */
 # define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
 # define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+# define MCI_MR_PDCFBYTE	(  1 << 13)	/* Force Byte Transfer */
+# define MCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
+# define MCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
 #define MCI_DTOR		0x0008	/* Data Timeout */
 # define MCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
 # define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
@@ -28,6 +40,7 @@
 # define MCI_SDCSEL_MASK	(  3 <<  0)
 # define MCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
 # define MCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
+# define MCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
 # define MCI_SDCBUS_MASK	(  3 <<  6)
 #define MCI_ARGR		0x0010	/* Command Argument */
 #define MCI_CMDR		0x0014	/* Command */
@@ -56,6 +69,9 @@
 #define MCI_BLKR		0x0018	/* Block */
 # define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
 # define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define MCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
+# define MCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
+# define MCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
 #define MCI_RSPR		0x0020	/* Response 0 */
 #define MCI_RSPR1		0x0024	/* Response 1 */
 #define MCI_RSPR2		0x0028	/* Response 2 */
@@ -83,7 +99,24 @@
 # define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
 # define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
 # define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
+#define MCI_DMA			0x0050	/* DMA Configuration[2] */
+# define MCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA Write Buffer Offset */
+# define MCI_DMA_CHKSIZE(x)	((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define MCI_DMAEN		(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+#define MCI_CFG			0x0054	/* Configuration[2] */
+# define MCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
+# define MCI_CFG_FERRCTRL_COR	(  1 <<  4)	/* Flow Error flag reset control mode */
+# define MCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
+# define MCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
+#define MCI_WPMR		0x00e4	/* Write Protection Mode[2] */
+# define MCI_WP_EN		(  1 <<  0)	/* WP Enable */
+# define MCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
+#define MCI_WPSR		0x00e8	/* Write Protection Status[2] */
+# define MCI_GET_WP_VS(x)	((x) & 0x0f)
+# define MCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
+#define MCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
 
+/* This is not including the FIFO Aperture on MCI2 */
 #define MCI_REGS_SIZE		0x100
 
 /* Register access macros */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index cf6a100bb38..7b603e4b41d 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -177,6 +177,7 @@ struct atmel_mci {
  *	available.
  * @wp_pin: GPIO pin used for card write protect sending, or negative
  *	if not available.
+ * @detect_is_active_high: The state of the detect pin when it is active.
  * @detect_timer: Timer used for debouncing @detect_pin interrupts.
  */
 struct atmel_mci_slot {
@@ -196,6 +197,7 @@ struct atmel_mci_slot {
 
 	int			detect_pin;
 	int			wp_pin;
+	bool			detect_is_active_high;
 
 	struct timer_list	detect_timer;
 };
@@ -924,7 +926,8 @@ static int atmci_get_cd(struct mmc_host *mmc)
 	struct atmel_mci_slot	*slot = mmc_priv(mmc);
 
 	if (gpio_is_valid(slot->detect_pin)) {
-		present = !gpio_get_value(slot->detect_pin);
+		present = !(gpio_get_value(slot->detect_pin) ^
+			    slot->detect_is_active_high);
 		dev_dbg(&mmc->class_dev, "card is %spresent\n",
 				present ? "" : "not ");
 	}
@@ -1028,7 +1031,8 @@ static void atmci_detect_change(unsigned long data)
 		return;
 
 	enable_irq(gpio_to_irq(slot->detect_pin));
-	present = !gpio_get_value(slot->detect_pin);
+	present = !(gpio_get_value(slot->detect_pin) ^
+		    slot->detect_is_active_high);
 	present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
 
 	dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
@@ -1456,6 +1460,7 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 	slot->host = host;
 	slot->detect_pin = slot_data->detect_pin;
 	slot->wp_pin = slot_data->wp_pin;
+	slot->detect_is_active_high = slot_data->detect_is_active_high;
 	slot->sdc_reg = sdc_reg;
 
 	mmc->ops = &atmci_ops;
@@ -1477,7 +1482,8 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 		if (gpio_request(slot->detect_pin, "mmc_detect")) {
 			dev_dbg(&mmc->class_dev, "no detect pin available\n");
 			slot->detect_pin = -EBUSY;
-		} else if (gpio_get_value(slot->detect_pin)) {
+		} else if (gpio_get_value(slot->detect_pin) ^
+				slot->detect_is_active_high) {
 			clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
 		}
 	}
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
new file mode 100644
index 00000000000..11efefb1af5
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -0,0 +1,804 @@
+/*
+ *  cb710/mmc.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/*	1, 2, 4, 8, 16, 32, 128, 512 */
+	0, 1, 2, 3,  4,  5,   7,   9
+};
+#define CB710_MAX_DIVIDER_IDX	\
+	(ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+	33, 10, 20, 25, 30, 35, 40, 45,
+	50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+	u32 src_freq_idx;
+	u32 divider_idx;
+	int src_hz;
+
+	/* this is magic, unverifiable for me, unless I get
+	 * MMC card with cables connected to bus signals */
+	pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+	src_freq_idx = (src_freq_idx >> 16) & 0xF;
+	src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+	for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+		if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+			break;
+	}
+
+	if (src_freq_idx)
+		divider_idx |= 0x8;
+
+	cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+	dev_dbg(cb710_slot_dev(slot),
+		"clock set to %d Hz, wanted %d Hz; flag = %d\n",
+		src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+		hz, (divider_idx & 8) != 0);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	/* clear global IE
+	 * - it gets set later if any interrupt sources are enabled */
+	mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+	/* look like interrupt is fired whenever
+	 * WORD[0x0C] & WORD[0x10] != 0;
+	 * -> bit 15 port 0x0C seems to be global interrupt enable
+	 */
+
+	enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+		& ~mask) | enable;
+
+	if (enable)
+		enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+	cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+	unsigned long flags;
+
+	spin_lock_irqsave(&reader->irq_lock, flags);
+	/* this is the only thing irq_lock protects */
+	__cb710_mmc_enable_irq(slot, enable, mask);
+	spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+	cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
+{
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_CARD_DETECTED;
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+	dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
+		enable ? 4 : 1, enable ? "s" : "");
+	if (enable)
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			CB710_MMC_C1_4BIT_DATA_BUS, 0);
+	else
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+	u16 status;
+
+	status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+	if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		/* it is just a guess, so log it */
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : ignoring bit 6 in status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+	}
+
+	if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : returning EIO on status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_RESET);
+		return -EIO;
+	}
+
+	/* 'what' is a bit in MMC_STATUS1 */
+	if ((status >> 8) & what) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+	int err = 0;
+	unsigned limit = 2000000;	/* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (!(err = cb710_check_event(slot, what))) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 2000000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+			limit, what, e, x);
+#endif
+	return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+	unsigned limit = 500000;	/* FIXME: real timeout */
+	int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 500000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+			limit, mask, e, x);
+#endif
+	return 0;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+	size_t count, size_t blocksize)
+{
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+		((count - 1) << 16)|(blocksize - 1));
+
+	dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
+		count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+	/* without this, received data is prepended with 8-bytes of zeroes */
+	u32 r1, r2;
+	int ok = 0;
+
+	r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+	    & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		ok = 1;
+	}
+
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: expected STATUS0 bit was %s\n",
+		ok ? "set." : "NOT SET!");
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+		r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+	struct sg_mapping_iter *miter, size_t dw_count)
+{
+	if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+		int err = cb710_wait_for_event(slot,
+			CB710_MMC_S1_PIO_TRANSFER_DONE);
+		if (err)
+			return err;
+	}
+
+	cb710_sg_dwiter_write_from_io(miter,
+		slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+	return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+	return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+	 * except single 8B block */
+	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	cb710_mmc_fifo_hack(slot);
+
+	while (blocks-- > 0) {
+		len = data->blksz;
+
+		while (len >= 16) {
+			err = cb710_mmc_receive_pio(slot, &miter, 4);
+			if (err)
+				goto out;
+			len -= 16;
+		}
+
+		if (!len)
+			continue;
+
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+			len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+		len = (len >= 8) ? 4 : 2;
+		err = cb710_mmc_receive_pio(slot, &miter, len);
+		if (err)
+			goto out;
+	}
+out:
+	cb710_sg_miter_stop_writing(&miter);
+	return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles multiple
+	 * non-16B-boundary blocks */
+	if (unlikely(data->blocks > 1 && data->blksz & 15))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	while (blocks-- > 0) {
+		len = (data->blksz + 15) >> 4;
+		do {
+			if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+			    & CB710_MMC_S2_FIFO_EMPTY)) {
+				err = cb710_wait_for_event(slot,
+					CB710_MMC_S1_PIO_TRANSFER_DONE);
+				if (err)
+					goto out;
+			}
+			cb710_sg_dwiter_read_to_io(&miter,
+				slot->iobase + CB710_MMC_DATA_PORT, 4);
+		} while (--len);
+	}
+out:
+	sg_miter_stop(&miter);
+	return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+	struct mmc_command *cmd)
+{
+	unsigned int flags = cmd->flags;
+	u16 cb_flags = 0;
+
+	/* Windows driver returned 0 for commands for which no response
+	 * is expected. It happened that there were only two such commands
+	 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+	 * as well be a bug in that driver.
+	 *
+	 * Original driver set bit 14 for MMC/SD application
+	 * commands. There's no difference 'on the wire' and
+	 * it apparently works without it anyway.
+	 */
+
+	switch (flags & MMC_CMD_MASK) {
+	case MMC_CMD_AC:	cb_flags = CB710_MMC_CMD_AC;	break;
+	case MMC_CMD_ADTC:	cb_flags = CB710_MMC_CMD_ADTC;	break;
+	case MMC_CMD_BC:	cb_flags = CB710_MMC_CMD_BC;	break;
+	case MMC_CMD_BCR:	cb_flags = CB710_MMC_CMD_BCR;	break;
+	}
+
+	if (flags & MMC_RSP_BUSY)
+		cb_flags |= CB710_MMC_RSP_BUSY;
+
+	cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		cb_flags |= CB710_MMC_DATA_READ;
+
+	if (flags & MMC_RSP_PRESENT) {
+		/* Windows driver set 01 at bits 4,3 except for
+		 * MMC_SET_BLOCKLEN where it set 10. Maybe the
+		 * hardware can do something special about this
+		 * command? The original driver looks buggy/incomplete
+		 * anyway so we ignore this for now.
+		 *
+		 * I assume that 00 here means no response is expected.
+		 */
+		cb_flags |= CB710_MMC_RSP_PRESENT;
+
+		if (flags & MMC_RSP_136)
+			cb_flags |= CB710_MMC_RSP_136;
+		if (!(flags & MMC_RSP_CRC))
+			cb_flags |= CB710_MMC_RSP_NO_CRC;
+	}
+
+	return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+	struct mmc_command *cmd)
+{
+	unsigned rsp_opcode, wanted_opcode;
+
+	/* Looks like final byte with CRC is always stripped (same as SDHCI) */
+	if (cmd->flags & MMC_RSP_136) {
+		u32 resp[4];
+
+		resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+		resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+		resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+		resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+		rsp_opcode = resp[0] >> 24;
+
+		cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+		cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+		cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+		cmd->resp[3] = (resp[3] << 8);
+	} else {
+		rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+		cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+	}
+
+	wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+	if (rsp_opcode != wanted_opcode)
+		cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+	struct mmc_data *data)
+{
+	int error, to;
+
+	if (data->flags & MMC_DATA_READ)
+		error = cb710_mmc_receive(slot, data);
+	else
+		error = cb710_mmc_send(slot, data);
+
+	to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+	if (!error)
+		error = to;
+
+	if (!error)
+		data->bytes_xfered = data->blksz * data->blocks;
+	return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_data *data = cmd->data;
+
+	u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+	dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+	if (data) {
+		if (!cb710_is_transfer_size_supported(data)) {
+			data->error = -EINVAL;
+			return -1;
+		}
+		cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+	}
+
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+	cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+	cb710_mmc_reset_events(slot);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+	cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+	if (cmd->error)
+		return -1;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cb710_receive_response(slot, cmd);
+		if (cmd->error)
+			return -1;
+	}
+
+	if (data)
+		data->error = cb710_mmc_transfer_data(slot, data);
+	return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	WARN_ON(reader->mrq != NULL);
+
+	reader->mrq = mrq;
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+	if (cb710_mmc_is_card_inserted(slot)) {
+		if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+			cb710_mmc_command(mmc, mrq->stop);
+		mdelay(1);
+	} else {
+		mrq->cmd->error = -ENOMEDIUM;
+	}
+
+	tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+	int err;
+
+	/* a lot of magic; see comment in cb710_mmc_set_clock() */
+	dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(2);
+	dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	/* This port behaves weird: quick byte reads of 0x08,0x09 return
+	 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+	 * read/written from userspace...  What am I missing here?
+	 * (it doesn't depend on write-to-read delay) */
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+	return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	int err;
+
+	cb710_mmc_set_clock(mmc, ios->clock);
+
+	if (!cb710_mmc_is_card_inserted(slot)) {
+		dev_dbg(cb710_slot_dev(slot),
+			"no card inserted - ignoring bus powerup request\n");
+		ios->power_mode = MMC_POWER_OFF;
+	}
+
+	if (ios->power_mode != reader->last_power_mode)
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		err = cb710_mmc_powerup(slot);
+		if (err) {
+			dev_warn(cb710_slot_dev(slot),
+				"powerup failed (%d)- retrying\n", err);
+			cb710_mmc_powerdown(slot);
+			udelay(1);
+			err = cb710_mmc_powerup(slot);
+			if (err)
+				dev_warn(cb710_slot_dev(slot),
+					"powerup retry failed (%d) - expect errors\n",
+					err);
+		}
+		reader->last_power_mode = MMC_POWER_ON;
+		break;
+	case MMC_POWER_OFF:
+		cb710_mmc_powerdown(slot);
+		reader->last_power_mode = MMC_POWER_OFF;
+		break;
+	case MMC_POWER_UP:
+	default:
+		/* ignore */;
+	}
+
+	cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	u32 status, config1, config2, irqen;
+
+	status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+	irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+	config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+	config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+	dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+		"ie: %08X, c2: %08X, c1: %08X\n",
+		status, irqen, config2, config1);
+
+	if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+		/* ack the event */
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_CARD_CHANGED);
+		if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+		    == CB710_MMC_IE_CISTATUS_MASK)
+			mmc_detect_change(mmc, HZ/5);
+	} else {
+		dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+		spin_lock(&reader->irq_lock);
+		__cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+		spin_unlock(&reader->irq_lock);
+	}
+
+	return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+	struct mmc_host *mmc = (void *)data;
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_request *mrq = reader->mrq;
+
+	reader->mrq = NULL;
+	mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+	.request = cb710_mmc_request,
+	.set_ios = cb710_mmc_set_ios,
+	.get_ro = cb710_mmc_get_ro
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	int err;
+
+	err = mmc_suspend_host(mmc, state);
+	if (err)
+		return err;
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+
+	return mmc_resume_host(mmc);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_mmc_init(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	struct mmc_host *mmc;
+	struct cb710_mmc_reader *reader;
+	int err;
+	u32 val;
+
+	mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+	if (!mmc)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, mmc);
+
+	/* harmless (maybe) magic */
+	pci_read_config_dword(chip->pdev, 0x48, &val);
+	val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+	dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+	val *= 1000000;
+
+	mmc->ops = &cb710_mmc_host;
+	mmc->f_max = val;
+	mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+	mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	reader = mmc_priv(mmc);
+
+	tasklet_init(&reader->finish_req_tasklet,
+		cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+	spin_lock_init(&reader->irq_lock);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+	err = mmc_add_host(mmc);
+	if (unlikely(err))
+		goto err_free_mmc;
+
+	dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+		mmc_hostname(mmc));
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+	return 0;
+
+err_free_mmc:
+	dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+	mmc_free_host(mmc);
+	return err;
+}
+
+static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+	mmc_remove_host(mmc);
+
+	/* IRQs should be disabled now, but let's stay on the safe side */
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, NULL);
+
+	/* clear config ports - just in case */
+	cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+	tasklet_kill(&reader->finish_req_tasklet);
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+	.driver.name = "cb710-mmc",
+	.probe = cb710_mmc_init,
+	.remove = __devexit_p(cb710_mmc_exit),
+#ifdef CONFIG_PM
+	.suspend = cb710_mmc_suspend,
+	.resume = cb710_mmc_resume,
+#endif
+};
+
+static int __init cb710_mmc_init_module(void)
+{
+	return platform_driver_register(&cb710_mmc_driver);
+}
+
+static void __exit cb710_mmc_cleanup_module(void)
+{
+	platform_driver_unregister(&cb710_mmc_driver);
+}
+
+module_init(cb710_mmc_init_module);
+module_exit(cb710_mmc_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");
diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h
new file mode 100644
index 00000000000..e845c776bdd
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.h
@@ -0,0 +1,104 @@
+/*
+ *  cb710/cb710-mmc.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+	struct tasklet_struct finish_req_tasklet;
+	struct mmc_request *mrq;
+	spinlock_t irq_lock;
+	unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(&slot->pdev.dev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = container_of(mmc_dev(mmc),
+		struct platform_device, dev);
+	return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT		0x00
+
+#define CB710_MMC_CONFIG_PORT		0x04
+#define CB710_MMC_CONFIG0_PORT		0x04
+#define CB710_MMC_CONFIG1_PORT		0x05
+#define   CB710_MMC_C1_4BIT_DATA_BUS		0x40
+#define CB710_MMC_CONFIG2_PORT		0x06
+#define   CB710_MMC_C2_READ_PIO_SIZE_MASK	0x0F	/* N-1 */
+#define CB710_MMC_CONFIG3_PORT		0x07
+
+#define CB710_MMC_CONFIGB_PORT		0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT	0x0C
+#define   CB710_MMC_IE_TEST_MASK		0x00BF
+#define   CB710_MMC_IE_CARD_INSERTION_STATUS	0x1000
+#define   CB710_MMC_IE_IRQ_ENABLE		0x8000
+#define   CB710_MMC_IE_CISTATUS_MASK		\
+		(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT		0x10
+#define   CB710_MMC_STATUS_ERROR_EVENTS		0x60FF
+#define CB710_MMC_STATUS0_PORT		0x10
+#define   CB710_MMC_S0_FIFO_UNDERFLOW		0x40
+#define CB710_MMC_STATUS1_PORT		0x11
+#define   CB710_MMC_S1_COMMAND_SENT		0x01
+#define   CB710_MMC_S1_DATA_TRANSFER_DONE	0x02
+#define   CB710_MMC_S1_PIO_TRANSFER_DONE	0x04
+#define   CB710_MMC_S1_CARD_CHANGED		0x10
+#define   CB710_MMC_S1_RESET			0x20
+#define CB710_MMC_STATUS2_PORT		0x12
+#define   CB710_MMC_S2_FIFO_READY		0x01
+#define   CB710_MMC_S2_FIFO_EMPTY		0x02
+#define   CB710_MMC_S2_BUSY_10			0x10
+#define   CB710_MMC_S2_BUSY_20			0x20
+#define CB710_MMC_STATUS3_PORT		0x13
+#define   CB710_MMC_S3_CARD_DETECTED		0x02
+#define   CB710_MMC_S3_WRITE_PROTECTED		0x04
+
+#define CB710_MMC_CMD_TYPE_PORT		0x14
+#define   CB710_MMC_RSP_TYPE_MASK		0x0007
+#define     CB710_MMC_RSP_R1			(0)
+#define     CB710_MMC_RSP_136			(5)
+#define     CB710_MMC_RSP_NO_CRC		(2)
+#define   CB710_MMC_RSP_PRESENT_MASK		0x0018
+#define     CB710_MMC_RSP_NONE			(0 << 3)
+#define     CB710_MMC_RSP_PRESENT		(1 << 3)
+#define     CB710_MMC_RSP_PRESENT_X		(2 << 3)
+#define   CB710_MMC_CMD_TYPE_MASK		0x0060
+#define     CB710_MMC_CMD_BC			(0 << 5)
+#define     CB710_MMC_CMD_BCR			(1 << 5)
+#define     CB710_MMC_CMD_AC			(2 << 5)
+#define     CB710_MMC_CMD_ADTC			(3 << 5)
+#define   CB710_MMC_DATA_READ			0x0080
+#define   CB710_MMC_CMD_CODE_MASK		0x3F00
+#define   CB710_MMC_CMD_CODE_SHIFT		8
+#define   CB710_MMC_IS_APP_CMD			0x4000
+#define   CB710_MMC_RSP_BUSY			0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT	0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT	0x1C
+#define CB710_MMC_RESPONSE0_PORT	0x20
+#define CB710_MMC_RESPONSE1_PORT	0x24
+#define CB710_MMC_RESPONSE2_PORT	0x28
+#define CB710_MMC_RESPONSE3_PORT	0x2C
+
+#endif /* LINUX_CB710_MMC_H */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index f48349d18c9..240608cc7ae 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -97,6 +97,14 @@
  */
 #define r1b_timeout		(HZ * 3)
 
+/* One of the critical speed parameters is the amount of data which may
+ * be transfered in one command. If this value is too low, the SD card
+ * controller has to do multiple partial block writes (argggh!). With
+ * today (2008) SD cards there is little speed gain if we transfer more
+ * than 64 KBytes at a time. So use this value until there is any indication
+ * that we should do more here.
+ */
+#define MMC_SPI_BLOCKSATONCE	128
 
 /****************************************************************************/
 
@@ -327,15 +335,16 @@ checkstatus:
 
 	/* Status byte: the entire seven-bit R1 response.  */
 	if (cmd->resp[0] != 0) {
-		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
-				      | R1_SPI_ILLEGAL_COMMAND)
+		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS)
 				& cmd->resp[0])
-			value = -EINVAL;
+			value = -EFAULT; /* Bad address */
+		else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0])
+			value = -ENOSYS; /* Function not implemented */
 		else if (R1_SPI_COM_CRC & cmd->resp[0])
-			value = -EILSEQ;
+			value = -EILSEQ; /* Illegal byte sequence */
 		else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
 				& cmd->resp[0])
-			value = -EIO;
+			value = -EIO;    /* I/O error */
 		/* else R1_SPI_IDLE, "it's resetting" */
 	}
 
@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi)
 
 	mmc->ops = &mmc_spi_ops;
 	mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
+	mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
+	mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
 
 	mmc->caps = MMC_CAP_SPI;
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 36875dcfa49..e1aa8471ab1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data)
 	mod_timer(&host->timer, jiffies + HZ);
 }
 
-static int __devinit mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct mmc_platform_data *plat = dev->dev.platform_data;
 	struct mmci_host *host;
@@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id)
 		host->mclk = clk_get_rate(host->clk);
 		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
 	}
-	host->base = ioremap(dev->res.start, SZ_4K);
+	host->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!host->base) {
 		ret = -ENOMEM;
 		goto clk_disable;
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index c643d0fe118..b56d72ff06e 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -64,6 +64,31 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
 	unsigned int tmout;
 	int tmout_index;
 
+	/*
+	 * Hardware weirdness.  The FIFO_EMPTY bit of the HW_STATE
+	 * register is sometimes not set before a while when some
+	 * "unusual" data block sizes are used (such as with the SWITCH
+	 * command), even despite the fact that the XFER_DONE interrupt
+	 * was raised.  And if another data transfer starts before
+	 * this bit comes to good sense (which eventually happens by
+	 * itself) then the new transfer simply fails with a timeout.
+	 */
+	if (!(mvsd_read(MVSD_HW_STATE) & (1 << 13))) {
+		unsigned long t = jiffies + HZ;
+		unsigned int hw_state,  count = 0;
+		do {
+			if (time_after(jiffies, t)) {
+				dev_warn(host->dev, "FIFO_EMPTY bit missing\n");
+				break;
+			}
+			hw_state = mvsd_read(MVSD_HW_STATE);
+			count++;
+		} while (!(hw_state & (1 << 13)));
+		dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
+				   "(hw=0x%04x, count=%d, jiffies=%ld)\n",
+				   hw_state, count, jiffies - (t - HZ));
+	}
+
 	/* If timeout=0 then maximum timeout index is used. */
 	tmout = DIV_ROUND_UP(data->timeout_ns, host->ns_per_clk);
 	tmout += data->timeout_clks;
@@ -620,9 +645,18 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (ios->bus_width == MMC_BUS_WIDTH_4)
 		ctrl_reg |= MVSD_HOST_CTRL_DATA_WIDTH_4_BITS;
 
+	/*
+	 * The HI_SPEED_EN bit is causing trouble with many (but not all)
+	 * high speed SD, SDHC and SDIO cards.  Not enabling that bit
+	 * makes all cards work.  So let's just ignore that bit for now
+	 * and revisit this issue if problems for not enabling this bit
+	 * are ever reported.
+	 */
+#if 0
 	if (ios->timing == MMC_TIMING_MMC_HS ||
 	    ios->timing == MMC_TIMING_SD_HS)
 		ctrl_reg |= MVSD_HOST_CTRL_HI_SPEED_EN;
+#endif
 
 	host->ctrl = ctrl_reg;
 	mvsd_write(MVSD_HOST_CTRL, ctrl_reg);
@@ -882,3 +916,4 @@ module_param(nodma, int, 0);
 MODULE_AUTHOR("Maen Suleiman, Nicolas Pitre");
 MODULE_DESCRIPTION("Marvell MMC,SD,SDIO Host Controller driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mvsdio");
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index b4a615c55f2..bc14bb1b057 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -140,6 +140,8 @@ struct mxcmci_host {
 	struct work_struct	datawork;
 };
 
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
+
 static inline int mxcmci_use_dma(struct mxcmci_host *host)
 {
 	return host->do_dma;
@@ -160,7 +162,7 @@ static void mxcmci_softreset(struct mxcmci_host *host)
 	writew(0xff, host->base + MMC_REG_RES_TO);
 }
 
-static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 {
 	unsigned int nob = data->blocks;
 	unsigned int blksz = data->blksz;
@@ -168,6 +170,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 #ifdef HAS_DMA
 	struct scatterlist *sg;
 	int i;
+	int ret;
 #endif
 	if (data->flags & MMC_DATA_STREAM)
 		nob = 0xffff;
@@ -183,7 +186,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 	for_each_sg(data->sg, sg, data->sg_len, i) {
 		if (sg->offset & 3 || sg->length & 3) {
 			host->do_dma = 0;
-			return;
+			return 0;
 		}
 	}
 
@@ -192,23 +195,30 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
 					     data->sg_len,  host->dma_dir);
 
-		imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
-				 host->res->start + MMC_REG_BUFFER_ACCESS,
-				 DMA_MODE_READ);
+		ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
+				datasize,
+				host->res->start + MMC_REG_BUFFER_ACCESS,
+				DMA_MODE_READ);
 	} else {
 		host->dma_dir = DMA_TO_DEVICE;
 		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
 					     data->sg_len,  host->dma_dir);
 
-		imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
-				 host->res->start + MMC_REG_BUFFER_ACCESS,
-				 DMA_MODE_WRITE);
+		ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
+				datasize,
+				host->res->start + MMC_REG_BUFFER_ACCESS,
+				DMA_MODE_WRITE);
 	}
 
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret);
+		return ret;
+	}
 	wmb();
 
 	imx_dma_enable(host->dma);
 #endif /* HAS_DMA */
+	return 0;
 }
 
 static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
@@ -345,8 +355,11 @@ static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
 		stat = readl(host->base + MMC_REG_STATUS);
 		if (stat & STATUS_ERR_MASK)
 			return stat;
-		if (time_after(jiffies, timeout))
+		if (time_after(jiffies, timeout)) {
+			mxcmci_softreset(host);
+			mxcmci_set_clk_rate(host, host->clock);
 			return STATUS_TIME_OUT_READ;
+		}
 		if (stat & mask)
 			return 0;
 		cpu_relax();
@@ -531,6 +544,7 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
 {
 	struct mxcmci_host *host = mmc_priv(mmc);
 	unsigned int cmdat = host->cmdat;
+	int error;
 
 	WARN_ON(host->req != NULL);
 
@@ -540,7 +554,12 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
 	host->do_dma = 1;
 #endif
 	if (req->data) {
-		mxcmci_setup_data(host, req->data);
+		error = mxcmci_setup_data(host, req->data);
+		if (error) {
+			req->cmd->error = error;
+			goto out;
+		}
+
 
 		cmdat |= CMD_DAT_CONT_DATA_ENABLE;
 
@@ -548,7 +567,9 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
 			cmdat |= CMD_DAT_CONT_WRITE;
 	}
 
-	if (mxcmci_start_cmd(host, req->cmd, cmdat))
+	error = mxcmci_start_cmd(host, req->cmd, cmdat);
+out:
+	if (error)
 		mxcmci_finish_request(host, req);
 }
 
@@ -724,7 +745,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
-	mmc->f_min = clk_get_rate(host->clk) >> 7;
+	mmc->f_min = clk_get_rate(host->clk) >> 16;
 	mmc->f_max = clk_get_rate(host->clk) >> 1;
 
 	/* recommended in data sheet */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index bfa25c01c87..e7a331de573 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -822,7 +822,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		del_timer(&host->cmd_abort_timer);
 		host->abort = 1;
 		OMAP_MMC_WRITE(host, IE, 0);
-		disable_irq(host->irq);
+		disable_irq_nosync(host->irq);
 		schedule_work(&host->cmd_abort_work);
 		return IRQ_HANDLED;
 	}
@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver mmc_omap_driver = {
-	.probe		= mmc_omap_probe,
 	.remove		= mmc_omap_remove,
 	.suspend	= mmc_omap_suspend,
 	.resume		= mmc_omap_resume,
@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = {
 
 static int __init mmc_omap_init(void)
 {
-	return platform_driver_register(&mmc_omap_driver);
+	return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
 }
 
 static void __exit mmc_omap_exit(void)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e62a22a7f00..1cf9cfb3b64 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -680,7 +680,7 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
 	host->dma_ch = -1;
 	/*
 	 * DMA Callback: run in interrupt context.
-	 * mutex_unlock will through a kernel warning if used.
+	 * mutex_unlock will throw a kernel warning if used.
 	 */
 	up(&host->sem);
 }
@@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
-	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
 
 	if (pdata->slots[host->slot_id].wires >= 8)
@@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
+	/* initialize power supplies, gpios, etc */
 	if (pdata->init != NULL) {
 		if (pdata->init(&pdev->dev) != 0) {
-			dev_dbg(mmc_dev(host->mmc),
-				"Unable to configure MMC IRQs\n");
+			dev_dbg(mmc_dev(host->mmc), "late init error\n");
 			goto err_irq_cd_init;
 		}
 	}
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 
 	/* Request IRQ for card detect */
 	if ((mmc_slot(host).card_detect_irq)) {
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 430095725f9..d7d7109ef47 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -27,6 +27,7 @@
 #include <linux/err.h>
 #include <linux/mmc/host.h>
 #include <linux/io.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/sizes.h>
 
@@ -67,8 +68,42 @@ struct pxamci_host {
 	unsigned int		dma_dir;
 	unsigned int		dma_drcmrrx;
 	unsigned int		dma_drcmrtx;
+
+	struct regulator	*vcc;
 };
 
+static inline void pxamci_init_ocr(struct pxamci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+		if (host->pdata && host->pdata->ocr_mask)
+			dev_warn(mmc_dev(host->mmc),
+				"ocr_mask/setpower will not be used\n");
+	}
+#endif
+	if (host->vcc == NULL) {
+		/* fall-back to platform data */
+		host->mmc->ocr_avail = host->pdata ?
+			host->pdata->ocr_mask :
+			MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+}
+
+static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
+{
+#ifdef CONFIG_REGULATOR
+	if (host->vcc)
+		mmc_regulator_set_ocr(host->vcc, vdd);
+#endif
+	if (!host->vcc && host->pdata && host->pdata->setpower)
+		host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->power_mode != ios->power_mode) {
 		host->power_mode = ios->power_mode;
 
-		if (host->pdata && host->pdata->setpower)
-			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		pxamci_set_power(host, ios->vdd);
 
 		if (ios->power_mode == MMC_POWER_ON)
 			host->cmdat |= CMDAT_INIT;
@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev)
 	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
 							  : host->clkrate;
 
-	mmc->ocr_avail = host->pdata ?
-			 host->pdata->ocr_mask :
-			 MMC_VDD_32_33|MMC_VDD_33_34;
+	pxamci_init_ocr(host);
+
 	mmc->caps = 0;
 	host->cmdat = 0;
 	if (!cpu_is_pxa25x()) {
@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev)
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		if (host->vcc)
+			regulator_put(host->vcc);
+
 		if (host->pdata && host->pdata->exit)
 			host->pdata->exit(&pdev->dev, mmc);
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b7096..4eb4f37544a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -789,7 +790,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 
 	last_source = source;
 
-	s3c2410_dma_devconfig(host->dma, source, 3,
+	s3c2410_dma_devconfig(host->dma, source,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 	default:
 		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index 3ff4ac3abe8..128c614d11a 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -55,7 +55,13 @@ static u32 esdhc_readl(struct sdhci_host *host, int reg)
 
 static u16 esdhc_readw(struct sdhci_host *host, int reg)
 {
-	return in_be16(host->ioaddr + (reg ^ 0x2));
+	u16 ret;
+
+	if (unlikely(reg == SDHCI_HOST_VERSION))
+		ret = in_be16(host->ioaddr + reg);
+	else
+		ret = in_be16(host->ioaddr + (reg ^ 0x2));
+	return ret;
 }
 
 static u8 esdhc_readb(struct sdhci_host *host, int reg)
@@ -277,6 +283,7 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev)
 static const struct of_device_id sdhci_of_match[] = {
 	{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
 	{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
+	{ .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
 	{ .compatible = "generic-sdhci", },
 	{},
 };
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
new file mode 100644
index 00000000000..297f40ae6ad
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -0,0 +1,168 @@
+/*
+ * sdhci-pltfm.c Support for SDHCI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform devices
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/io.h>
+
+#include "sdhci.h"
+
+/*****************************************************************************\
+ *                                                                           *
+ * SDHCI core callbacks                                                      *
+ *                                                                           *
+\*****************************************************************************/
+
+static struct sdhci_ops sdhci_pltfm_ops = {
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct resource *iomem;
+	int ret;
+
+	BUG_ON(pdev == NULL);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (resource_size(iomem) != 0x100)
+		dev_err(&pdev->dev, "Invalid iomem size. You may "
+			"experience problems.\n");
+
+	if (pdev->dev.parent)
+		host = sdhci_alloc_host(pdev->dev.parent, 0);
+	else
+		host = sdhci_alloc_host(&pdev->dev, 0);
+
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto err;
+	}
+
+	host->hw_name = "platform";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+
+	if (!request_mem_region(iomem->start, resource_size(iomem),
+		mmc_hostname(host->mmc))) {
+		dev_err(&pdev->dev, "cannot request region\n");
+		ret = -EBUSY;
+		goto err_request;
+	}
+
+	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+	if (!host->ioaddr) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
+		goto err_remap;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+err_add_host:
+	iounmap(host->ioaddr);
+err_remap:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+	sdhci_free_host(host);
+err:
+	printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret);
+	return ret;
+}
+
+static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int dead;
+	u32 scratch;
+
+	dead = 0;
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(host, dead);
+	iounmap(host->ioaddr);
+	release_mem_region(iomem->start, resource_size(iomem));
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_pltfm_driver = {
+	.driver = {
+		.name	= "sdhci",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sdhci_pltfm_probe,
+	.remove		= __devexit_p(sdhci_pltfm_remove),
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+	return platform_driver_register(&sdhci_pltfm_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+	platform_driver_unregister(&sdhci_pltfm_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci");
+
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2226e..35789c6edc1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
 		sdhci_readl(host, SDHCI_CAPABILITIES),
 		sdhci_readl(host, SDHCI_MAX_CURRENT));
 
+	if (host->flags & SDHCI_USE_ADMA)
+		printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+		       readl(host->ioaddr + SDHCI_ADMA_ERROR),
+		       readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
 	printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
 }
 
@@ -1005,12 +1010,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr;
 
-	if (host->power == power)
+	if (power == (unsigned short)-1)
+		pwr = 0;
+	else {
+		switch (1 << power) {
+		case MMC_VDD_165_195:
+			pwr = SDHCI_POWER_180;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			pwr = SDHCI_POWER_300;
+			break;
+		case MMC_VDD_32_33:
+		case MMC_VDD_33_34:
+			pwr = SDHCI_POWER_330;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	if (host->pwr == pwr)
 		return;
 
-	if (power == (unsigned short)-1) {
+	host->pwr = pwr;
+
+	if (pwr == 0) {
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-		goto out;
+		return;
 	}
 
 	/*
@@ -1020,35 +1047,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	pwr = SDHCI_POWER_ON;
-
-	switch (1 << power) {
-	case MMC_VDD_165_195:
-		pwr |= SDHCI_POWER_180;
-		break;
-	case MMC_VDD_29_30:
-	case MMC_VDD_30_31:
-		pwr |= SDHCI_POWER_300;
-		break;
-	case MMC_VDD_32_33:
-	case MMC_VDD_33_34:
-		pwr |= SDHCI_POWER_330;
-		break;
-	default:
-		BUG();
-	}
-
 	/*
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
 	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
-		sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+	pwr |= SDHCI_POWER_ON;
 
-out:
-	host->power = power;
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 }
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 65c6f996bbd..2de08349c3c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -255,7 +255,7 @@ struct sdhci_host {
 	unsigned int		timeout_clk;	/* Timeout freq (KHz) */
 
 	unsigned int		clock;		/* Current clock (MHz) */
-	unsigned short		power;		/* Current voltage */
+	u8			pwr;		/* Current voltage */
 
 	struct mmc_request	*mrq;		/* Current request */
 	struct mmc_command	*cmd;		/* Current command */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 63fbd5b7d31..91991b460c4 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -10,7 +10,7 @@
  *
  * Driver for the MMC / SD / SDIO cell found in:
  *
- * TC6393XB TC6391XB TC6387XB T7L66XB
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
  *
  * This driver draws mainly on scattered spec sheets, Reverse engineering
  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
@@ -35,69 +35,47 @@
 
 #include "tmio_mmc.h"
 
-/*
- * Fixme - documentation conflicts on what the clock values are for the
- * various dividers.
- * One document I have says that its a divisor of a 24MHz clock, another 33.
- * This probably depends on HCLK for a given platform, so we may need to
- * require HCLK be passed to us from the MFD core.
- *
- */
-
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 {
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 	u32 clk = 0, clock;
 
 	if (new_clock) {
-		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+		for (clock = host->mmc->f_min, clk = 0x80000080;
+			new_clock >= (clock<<1); clk >>= 1)
 			clock <<= 1;
-			clk >>= 1;
-		}
-		if (clk & 0x1)
-			clk = 0x20000;
-
-		clk >>= 2;
-		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
 		clk |= 0x100;
 	}
 
-	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+	sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
 }
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
 	msleep(10);
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
 }
 
 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
-	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
 	msleep(10);
 }
 
 static void reset(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
 	/* FIXME - should we set stop clock reg here */
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	msleep(10);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
 	msleep(10);
 }
 
@@ -129,13 +107,12 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host)
 static int
 tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	int c = cmd->opcode;
 
 	/* Command 12 is handled by hardware */
 	if (cmd->opcode == 12 && !cmd->arg) {
-		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
 		return 0;
 	}
 
@@ -160,18 +137,18 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 	if (data) {
 		c |= DATA_PRESENT;
 		if (data->blocks > 1) {
-			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
 			c |= TRANSFER_MULTI;
 		}
 		if (data->flags & MMC_DATA_READ)
 			c |= TRANSFER_READ;
 	}
 
-	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+	enable_mmc_irqs(host, TMIO_MASK_CMD);
 
 	/* Fire off the command */
-	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
-	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+	sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
+	sd_ctrl_write16(host, CTL_SD_CMD, c);
 
 	return 0;
 }
@@ -183,7 +160,6 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
  */
 static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	unsigned short *buf;
 	unsigned int count;
@@ -206,9 +182,9 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 	/* Transfer the data */
 	if (data->flags & MMC_DATA_READ)
-		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 	else
-		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 
 	host->sg_off += count;
 
@@ -222,7 +198,6 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	struct mmc_command *stop;
 
@@ -251,13 +226,13 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 	 */
 
 	if (data->flags & MMC_DATA_READ)
-		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		disable_mmc_irqs(host, TMIO_MASK_READOP);
 	else
-		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+		disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 
 	if (stop) {
 		if (stop->opcode == 12 && !stop->arg)
-			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
 		else
 			BUG();
 	}
@@ -268,9 +243,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	unsigned int stat)
 {
-	void __iomem *ctl = host->ctl, *addr;
 	struct mmc_command *cmd = host->cmd;
-	int i;
+	int i, addr;
 
 	if (!host->cmd) {
 		pr_debug("Spurious CMD irq\n");
@@ -284,8 +258,8 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 * modify the order of the response for short response command types.
 	 */
 
-	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
-		cmd->resp[i] = tmio_ioread32(addr);
+	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = sd_ctrl_read32(host, addr);
 
 	if (cmd->flags &  MMC_RSP_136) {
 		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
@@ -307,9 +281,9 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 */
 	if (host->data && !cmd->error) {
 		if (host->data->flags & MMC_DATA_READ)
-			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+			enable_mmc_irqs(host, TMIO_MASK_READOP);
 		else
-			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+			enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 	} else {
 		tmio_mmc_finish_request(host);
 	}
@@ -321,20 +295,19 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 {
 	struct tmio_mmc_host *host = devid;
-	void __iomem *ctl = host->ctl;
 	unsigned int ireg, irq_mask, status;
 
 	pr_debug("MMC IRQ begin\n");
 
-	status = tmio_ioread32(ctl + CTL_STATUS);
-	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	status = sd_ctrl_read32(host, CTL_STATUS);
+	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 	pr_debug_status(status);
 	pr_debug_status(ireg);
 
 	if (!ireg) {
-		disable_mmc_irqs(ctl, status & ~irq_mask);
+		disable_mmc_irqs(host, status & ~irq_mask);
 
 		pr_debug("tmio_mmc: Spurious irq, disabling! "
 			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
@@ -346,7 +319,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	while (ireg) {
 		/* Card insert / remove attempts */
 		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+			ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
 				TMIO_STAT_CARD_REMOVE);
 			mmc_detect_change(host->mmc, 0);
 		}
@@ -358,25 +331,25 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 
 		/* Command completion */
 		if (ireg & TMIO_MASK_CMD) {
-			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			ack_mmc_irqs(host, TMIO_MASK_CMD);
 			tmio_mmc_cmd_irq(host, status);
 		}
 
 		/* Data transfer */
 		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
 			tmio_mmc_pio_irq(host);
 		}
 
 		/* Data transfer completion */
 		if (ireg & TMIO_STAT_DATAEND) {
-			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			ack_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tmio_mmc_data_irq(host);
 		}
 
 		/* Check status - keep going until we've handled it all */
-		status = tmio_ioread32(ctl + CTL_STATUS);
-		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		status = sd_ctrl_read32(host, CTL_STATUS);
+		irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 		pr_debug("Status at end of loop: %08x\n", status);
@@ -391,8 +364,6 @@ out:
 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	struct mmc_data *data)
 {
-	void __iomem *ctl = host->ctl;
-
 	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
 	    data->blksz, data->blocks);
 
@@ -407,8 +378,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	host->data = data;
 
 	/* Set transfer length / blocksize */
-	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
-	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
 
 	return 0;
 }
@@ -449,8 +420,6 @@ fail:
 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 
 	if (ios->clock)
 		tmio_mmc_set_clock(host, ios->clock);
@@ -458,12 +427,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	/* Power sequence - OFF -> ON -> UP */
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF: /* power down SD bus */
-		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 		tmio_mmc_clk_stop(host);
 		break;
 	case MMC_POWER_ON: /* power up SD bus */
 
-		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
 		break;
 	case MMC_POWER_UP: /* start bus clock */
 		tmio_mmc_clk_start(host);
@@ -472,10 +441,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
-		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
 	break;
 	case MMC_BUS_WIDTH_4:
-		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
 	break;
 	}
 
@@ -486,9 +455,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 static int tmio_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *ctl = host->ctl;
 
-	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+	return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
 }
 
 static struct mmc_host_ops tmio_mmc_ops = {
@@ -518,13 +486,8 @@ static int tmio_mmc_resume(struct platform_device *dev)
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
 	struct mmc_host *mmc = platform_get_drvdata(dev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
 	int ret = 0;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -532,6 +495,11 @@ static int tmio_mmc_resume(struct platform_device *dev)
 			goto out;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	mmc_resume_host(mmc);
 
 out:
@@ -545,20 +513,25 @@ out:
 static int __devinit tmio_mmc_probe(struct platform_device *dev)
 {
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_mmc_data *pdata;
 	struct resource *res_ctl, *res_cnf;
 	struct tmio_mmc_host *host;
 	struct mmc_host *mmc;
-	int ret = -ENOMEM;
+	int ret = -EINVAL;
 
 	if (dev->num_resources != 3)
 		goto out;
 
 	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (!res_ctl || !res_cnf) {
-		ret = -EINVAL;
+	if (!res_ctl || !res_cnf)
 		goto out;
-	}
+
+	pdata = cell->driver_data;
+	if (!pdata || !pdata->hclk)
+		goto out;
+
+	ret = -ENOMEM;
 
 	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
 	if (!mmc)
@@ -568,6 +541,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	host->mmc = mmc;
 	platform_set_drvdata(dev, mmc);
 
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res_ctl) >> 10;
+
 	host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
 	if (!host->ctl)
 		goto host_free;
@@ -578,15 +554,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps = MMC_CAP_4_BIT_DATA;
-	mmc->f_min = 46875; /* 24000000 / 512 */
-	mmc->f_max = 24000000;
+	mmc->f_max = pdata->hclk;
+	mmc->f_min = mmc->f_max / 512;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe,
-		host->cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -594,14 +565,19 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 			goto unmap_cnf;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	/* Disable SD power during suspend */
-	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+	sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
 
 	/* The below is required but why? FIXME */
-	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+	sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
 
 	/* Power down SD bus*/
-	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+	sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 
 	tmio_mmc_clk_stop(host);
 	reset(host);
@@ -612,22 +588,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	else
 		goto unmap_cnf;
 
-	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+	disable_mmc_irqs(host, TMIO_MASK_ALL);
 
-	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
-		host);
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
+		IRQF_TRIGGER_FALLING, "tmio-mmc", host);
 	if (ret)
 		goto unmap_cnf;
 
-	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
-
 	mmc_add_host(mmc);
 
 	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
 	       (unsigned long)host->ctl, host->irq);
 
 	/* Unmask the IRQs we want to know about */
-	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+	enable_mmc_irqs(host, TMIO_MASK_IRQ);
 
 	return 0;
 
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9c831ab2ece..9fa99859497 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -83,34 +83,36 @@
 		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
 #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
 
-#define enable_mmc_irqs(ctl, i) \
+
+#define enable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define disable_mmc_irqs(ctl, i) \
+#define disable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask |= ((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define ack_mmc_irqs(ctl, i) \
+#define ack_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask  = sd_ctrl_read32((host), CTL_STATUS); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+		sd_ctrl_write32((host), CTL_STATUS, mask); \
 	} while (0)
 
 
 struct tmio_mmc_host {
 	void __iomem *cnf;
 	void __iomem *ctl;
+	unsigned long bus_shift;
 	struct mmc_command      *cmd;
 	struct mmc_request      *mrq;
 	struct mmc_data         *data;
@@ -123,6 +125,63 @@ struct tmio_mmc_host {
 	unsigned int            sg_off;
 };
 
+#include <linux/io.h>
+
+static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	readsw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	writesw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
+		u8 val)
+{
+	writeb(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+	writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
+}
+
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 7d04fb9ddca..b8e35a0b4d7 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -154,7 +154,8 @@ config MTD_AFS_PARTS
 
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically. The
-	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+	  'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
+	  example.
 
 config MTD_OF_PARTS
 	tristate "Flash partition map based on OF description"
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6fde0a2e356..325fab92a62 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,7 +49,7 @@ config MTD_MS02NV
 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called ms02-nv.ko.
+	  The module will be called ms02-nv.
 
 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 62dee54af0a..43976aa4dbb 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		/* Calculate flash page address; use block erase (for speed) if
 		 * we're at a block boundary and need to erase the whole block.
 		 */
-		pageaddr = div_u64(instr->len, priv->page_size);
+		pageaddr = div_u64(instr->addr, priv->page_size);
 		do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
 		pageaddr = pageaddr << priv->page_offset;
 
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index a49a9c8f2cb..aaac3b6800b 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -47,40 +47,41 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 	unsigned long block, nsect;
 	char *buf;
 
-	block = req->sector << 9 >> tr->blkshift;
-	nsect = req->current_nr_sectors << 9 >> tr->blkshift;
+	block = blk_rq_pos(req) << 9 >> tr->blkshift;
+	nsect = blk_rq_cur_bytes(req) >> tr->blkshift;
 
 	buf = req->buffer;
 
 	if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
 	    req->cmd[0] == REQ_LB_OP_DISCARD)
-		return !tr->discard(dev, block, nsect);
+		return tr->discard(dev, block, nsect);
 
 	if (!blk_fs_request(req))
-		return 0;
+		return -EIO;
 
-	if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk))
-		return 0;
+	if (blk_rq_pos(req) + blk_rq_cur_sectors(req) >
+	    get_capacity(req->rq_disk))
+		return -EIO;
 
 	switch(rq_data_dir(req)) {
 	case READ:
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
 			if (tr->readsect(dev, block, buf))
-				return 0;
-		return 1;
+				return -EIO;
+		return 0;
 
 	case WRITE:
 		if (!tr->writesect)
-			return 0;
+			return -EIO;
 
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
 			if (tr->writesect(dev, block, buf))
-				return 0;
-		return 1;
+				return -EIO;
+		return 0;
 
 	default:
 		printk(KERN_NOTICE "Unknown request %u\n", rq_data_dir(req));
-		return 0;
+		return -EIO;
 	}
 }
 
@@ -88,19 +89,18 @@ static int mtd_blktrans_thread(void *arg)
 {
 	struct mtd_blktrans_ops *tr = arg;
 	struct request_queue *rq = tr->blkcore_priv->rq;
+	struct request *req = NULL;
 
 	/* we might get involved when memory gets low, so use PF_MEMALLOC */
 	current->flags |= PF_MEMALLOC;
 
 	spin_lock_irq(rq->queue_lock);
+
 	while (!kthread_should_stop()) {
-		struct request *req;
 		struct mtd_blktrans_dev *dev;
-		int res = 0;
-
-		req = elv_next_request(rq);
+		int res;
 
-		if (!req) {
+		if (!req && !(req = blk_fetch_request(rq))) {
 			set_current_state(TASK_INTERRUPTIBLE);
 			spin_unlock_irq(rq->queue_lock);
 			schedule();
@@ -119,8 +119,13 @@ static int mtd_blktrans_thread(void *arg)
 
 		spin_lock_irq(rq->queue_lock);
 
-		end_request(req, res);
+		if (!__blk_end_request_cur(req, res))
+			req = NULL;
 	}
+
+	if (req)
+		__blk_end_request_all(req, -EIO);
+
 	spin_unlock_irq(rq->queue_lock);
 
 	return 0;
@@ -373,7 +378,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	}
 
 	tr->blkcore_priv->rq->queuedata = tr;
-	blk_queue_hardsect_size(tr->blkcore_priv->rq, tr->blksize);
+	blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize);
 	if (tr->discard)
 		blk_queue_set_discard(tr->blkcore_priv->rq,
 				      blktrans_discard_request);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 890936d0275..f3276897859 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
 	help
           This enables the driver for the NAND flash device found on the
           Basler eXcite Smart Camera. If built as a module, the driver
-          will be named "excite_nandflash.ko".
+          will be named excite_nandflash.
 
 config MTD_NAND_CAFE
 	tristate "NAND support for OLPC CAFÉ chip"
@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
 	  controller is enabled for NAND, and currently requires that
 	  the controller be in MMIO mode.
 
-	  If you say "m", the module will be called "cs553x_nand.ko".
+	  If you say "m", the module will be called cs553x_nand.
 
 config MTD_NAND_ATMEL
 	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 0119220de7d..02700f769b8 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -407,16 +407,17 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	}
 	info->chip.ecc.mode = ecc_mode;
 
-	info->clk = clk_get(&pdev->dev, "AEMIFCLK");
+	info->clk = clk_get(&pdev->dev, "aemif");
 	if (IS_ERR(info->clk)) {
 		ret = PTR_ERR(info->clk);
-		dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret);
+		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
 		goto err_clk;
 	}
 
 	ret = clk_enable(info->clk);
 	if (ret < 0) {
-		dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret);
+		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+			ret);
 		goto err_clk_enable;
 	}
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index f3548d04801..40c26080ecd 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -831,6 +831,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_READID:
+		host->col_addr = 0;
 		send_read_id(host);
 		break;
 
@@ -867,6 +868,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	mtd->priv = this;
 	mtd->owner = THIS_MODULE;
 	mtd->dev.parent = &pdev->dev;
+	mtd->name = "mxc_nand";
 
 	/* 50 us command delay time */
 	this->chip_delay = 5;
@@ -882,8 +884,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->verify_buf = mxc_nand_verify_buf;
 
 	host->clk = clk_get(&pdev->dev, "nfc");
-	if (IS_ERR(host->clk))
+	if (IS_ERR(host->clk)) {
+		err = PTR_ERR(host->clk);
 		goto eclk;
+	}
 
 	clk_enable(host->clk);
 	host->clk_act = 1;
@@ -896,7 +900,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 
 	host->regs = ioremap(res->start, res->end - res->start + 1);
 	if (!host->regs) {
-		err = -EIO;
+		err = -ENOMEM;
 		goto eres;
 	}
 
@@ -1011,30 +1015,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct mtd_info *info = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
 	int ret = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
-	if (info)
-		ret = info->suspend(info);
-
-	/* Disable the NFC clock */
-	clk_disable(nfc_clk);	/* FIXME */
+	if (mtd) {
+		ret = mtd->suspend(mtd);
+		/* Disable the NFC clock */
+		clk_disable(host->clk);
+	}
 
 	return ret;
 }
 
 static int mxcnd_resume(struct platform_device *pdev)
 {
-	struct mtd_info *info = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
 	int ret = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
-	/* Enable the NFC clock */
-	clk_enable(nfc_clk);	/* FIXME */
 
-	if (info)
-		info->resume(info);
+	if (mtd) {
+		/* Enable the NFC clock */
+		clk_enable(host->clk);
+		mtd->resume(mtd);
+	}
 
 	return ret;
 }
@@ -1055,13 +1064,7 @@ static struct platform_driver mxcnd_driver = {
 
 static int __init mxc_nd_init(void)
 {
-	/* Register the device driver structure. */
-	pr_info("MXC MTD nand Driver\n");
-	if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
-		printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
-		return -ENODEV;
-	}
-	return 0;
+	return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
 }
 
 static void __exit mxc_nd_cleanup(void)
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f2e9de1414d..6391e3dc800 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,6 @@
 #include <mach/gpmc.h>
 #include <mach/onenand.h>
 #include <mach/gpio.h>
-#include <mach/pm.h>
 
 #include <mach/dma.h>
 
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index fbb37192199..682aad89708 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -480,9 +480,13 @@ static int pnp_registered;
 
 #ifdef CONFIG_EISA
 static struct eisa_device_id el3_eisa_ids[] = {
+		{ "TCM5090" },
+		{ "TCM5091" },
 		{ "TCM5092" },
 		{ "TCM5093" },
+		{ "TCM5094" },
 		{ "TCM5095" },
+		{ "TCM5098" },
 		{ "" }
 };
 MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d1ef7..3111b6c7cbc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1880,7 +1880,7 @@ config FEC_MPC52xx
 	---help---
 	  This option enables support for the MPC5200's on-chip
 	  Fast Ethernet Controller
-	  If compiled as module, it will be called 'fec_mpc52xx.ko'.
+	  If compiled as module, it will be called fec_mpc52xx.
 
 config FEC_MPC52xx_MDIO
 	bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO
 	  (Motorola? industry standard).
 	  If your board uses an external PHY connected to FEC, enable this.
 	  If not sure, enable.
-	  If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+	  If compiled as module, it will be called fec_mpc52xx_phy.
 
 config NE_H8300
 	tristate "NE2000 compatible support for H8/300"
@@ -2264,6 +2264,17 @@ config BNX2
 	  To compile this driver as a module, choose M here: the module
 	  will be called bnx2.  This is recommended.
 
+config CNIC
+	tristate "Broadcom CNIC support"
+	depends on BNX2
+	depends on UIO
+	help
+	  This driver supports offload features of Broadcom NetXtremeII
+	  gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
 	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1fc4602a6ff..db30ebd7b26 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_STNIC) += stnic.o 8390.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
 obj-$(CONFIG_BNX2X) += bnx2x.o
 bnx2x-objs := bnx2x_main.o bnx2x_link.o
 spidernet-y += spider_net.o spider_net_ethtool.o
@@ -102,7 +103,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_SEEQ8005) += seeq8005.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
+obj-$(CONFIG_MAC8390) += mac8390.o
 obj-$(CONFIG_APNE) += apne.o 8390.o
 obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
 obj-$(CONFIG_HP100) += hp100.o
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 78cc7146913..b642647170b 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
 		if (ints[0] > 2) {
 			dma = ints[3];
 		}
-		/* ignore any other paramters */
+		/* ignore any other parameters */
 	}
 	return 1;
 }
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053d3af..b6d188115ca 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 #endif
 			napi_complete(napi);
 			qmgr_enable_irq(rxq);
-			if (!qmgr_stat_empty(rxq) &&
-			    napi_reschedule(napi)) {
+			if (!qmgr_stat_below_low_watermark(rxq) &&
+			    napi_reschedule(napi)) { /* not empty again */
 #if DEBUG_RX
 				printk(KERN_DEBUG "%s: eth_poll"
 				       " napi_reschedule successed\n",
@@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused)
 			port->tx_buff_tab[n_desc] = NULL;
 		}
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq, phys, desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
 			       port->netdev->name);
@@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		/* really empty in fact */
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_xmit ready again\n",
 			       dev->name);
@@ -814,29 +816,29 @@ static int request_queues(struct port *port)
 	int err;
 
 	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
-			    "%s:RX-free", port->netdev->name);
+				 "%s:RX-free", port->netdev->name);
 	if (err)
 		return err;
 
 	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
-			    "%s:RX", port->netdev->name);
+				 "%s:RX", port->netdev->name);
 	if (err)
 		goto rel_rxfree;
 
 	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
-			    "%s:TX", port->netdev->name);
+				 "%s:TX", port->netdev->name);
 	if (err)
 		goto rel_rx;
 
 	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
-			    "%s:TX-ready", port->netdev->name);
+				 "%s:TX-ready", port->netdev->name);
 	if (err)
 		goto rel_tx;
 
 	/* TX-done queue handles skbs sent out by the NPEs */
 	if (!ports_open) {
 		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
-				    "%s:TX-done", DRV_NAME);
+					 "%s:TX-done", DRV_NAME);
 		if (err)
 			goto rel_txready;
 	}
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index fb57b750866..1342418fb20 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -37,6 +37,7 @@ char atl1e_driver_version[] = DRV_VERSION;
  */
 static struct pci_device_id atl1e_pci_tbl[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
 	/* required last entry */
 	{ 0 }
 };
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 0ab22540bf5..4e817126e28 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -82,6 +82,12 @@
 
 #include "atl1.h"
 
+#define ATLX_DRIVER_VERSION "2.1.3"
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
+	Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATLX_DRIVER_VERSION);
+
 /* Temporary hack for merging atl1 and atl2 */
 #include "atlx.c"
 
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h
index 297a03da6b7..14054b75aa6 100644
--- a/drivers/net/atlx/atlx.h
+++ b/drivers/net/atlx/atlx.h
@@ -29,12 +29,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 
-#define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
-	Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(ATLX_DRIVER_VERSION);
-
 #define ATLX_ERR_PHY			2
 #define ATLX_ERR_PHY_SPEED		7
 #define ATLX_ERR_PHY_RES		8
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index e678498de6d..d24158e7f30 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -97,7 +97,7 @@
 #define B44_DMARX_STAT	0x021CUL /* DMA RX Current Active Desc. + Status */
 #define  DMARX_STAT_CDMASK	0x00000fff /* Current Descriptor Mask */
 #define  DMARX_STAT_SMASK	0x0000f000 /* State Mask */
-#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disbaled */
+#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disabled */
 #define  DMARX_STAT_SACTIVE	0x00001000 /* State Active */
 #define  DMARX_STAT_SIDLE	0x00002000 /* State Idle Wait */
 #define  DMARX_STAT_SSTOPPED	0x00003000 /* State Stopped */
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index c49ddd08b2a..b4bb06fdf30 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -35,8 +35,22 @@
 #define DRV_VER			"2.0.348"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
+#define OC_NAME			"Emulex OneConnect 10Gbps NIC"
 #define DRV_DESC		BE_NAME "Driver"
 
+#define BE_VENDOR_ID 		0x19a2
+#define BE_DEVICE_ID1		0x211
+#define OC_DEVICE_ID1		0x700
+#define OC_DEVICE_ID2		0x701
+
+static inline char *nic_name(struct pci_dev *pdev)
+{
+	if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+		return OC_NAME;
+	else
+		return BE_NAME;
+}
+
 /* Number of bytes of an RX frame that are copied to skb->data */
 #define BE_HDR_LEN 		64
 #define BE_MAX_JUMBO_FRAME_SIZE	9018
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 30d0c81c989..5c378b5e8e4 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048;
 module_param(rx_frag_size, uint, S_IRUGO);
 MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
 
-#define BE_VENDOR_ID 		0x19a2
-#define BE2_DEVICE_ID_1 	0x0211
 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
-	{ PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	if (status != 0)
 		goto stats_clean;
 
-	dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+	dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
 	return 0;
 
 stats_clean:
@@ -1873,7 +1873,7 @@ rel_reg:
 disable_dev:
 	pci_disable_device(pdev);
 do_none:
-	dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+	dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev));
 	return status;
 }
 
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 9f971ed6b58..b4da1821332 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -979,22 +979,7 @@ static int bfin_mac_open(struct net_device *dev)
 	return 0;
 }
 
-static const struct net_device_ops bfin_mac_netdev_ops = {
-	.ndo_open		= bfin_mac_open,
-	.ndo_stop		= bfin_mac_close,
-	.ndo_start_xmit		= bfin_mac_hard_start_xmit,
-	.ndo_set_mac_address	= bfin_mac_set_mac_address,
-	.ndo_tx_timeout		= bfin_mac_timeout,
-	.ndo_set_multicast_list	= bfin_mac_set_multicast_list,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= bfin_mac_poll,
-#endif
-};
-
 /*
- *
  * this makes the board clean up everything that it can
  * and not talk to the outside world.   Caused by
  * an 'ifconfig ethX down'
@@ -1019,6 +1004,20 @@ static int bfin_mac_close(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops bfin_mac_netdev_ops = {
+	.ndo_open		= bfin_mac_open,
+	.ndo_stop		= bfin_mac_close,
+	.ndo_start_xmit		= bfin_mac_hard_start_xmit,
+	.ndo_set_mac_address	= bfin_mac_set_mac_address,
+	.ndo_tx_timeout		= bfin_mac_timeout,
+	.ndo_set_multicast_list	= bfin_mac_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= bfin_mac_poll,
+#endif
+};
+
 static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b0cb29d4cc0..3f5fcb0156a 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -49,6 +49,10 @@
 #include <linux/firmware.h>
 #include <linux/log2.h>
 
+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
 #include "bnx2.h"
 #include "bnx2_fw.h"
 
@@ -315,6 +319,158 @@ bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val)
 	spin_unlock_bh(&bp->indirect_lock);
 }
 
+#ifdef BCM_CNIC
+static int
+bnx2_drv_ctl(struct net_device *dev, struct drv_ctl_info *info)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct drv_ctl_io *io = &info->data.io;
+
+	switch (info->cmd) {
+	case DRV_CTL_IO_WR_CMD:
+		bnx2_reg_wr_ind(bp, io->offset, io->data);
+		break;
+	case DRV_CTL_IO_RD_CMD:
+		io->data = bnx2_reg_rd_ind(bp, io->offset);
+		break;
+	case DRV_CTL_CTX_WR_CMD:
+		bnx2_ctx_wr(bp, io->cid_addr, io->offset, io->data);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void bnx2_setup_cnic_irq_info(struct bnx2 *bp)
+{
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	int sb_id;
+
+	if (bp->flags & BNX2_FLAG_USING_MSIX) {
+		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+		bnapi->cnic_present = 0;
+		sb_id = bp->irq_nvecs;
+		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+	} else {
+		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+		bnapi->cnic_tag = bnapi->last_status_idx;
+		bnapi->cnic_present = 1;
+		sb_id = 0;
+		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+	}
+
+	cp->irq_arr[0].vector = bp->irq_tbl[sb_id].vector;
+	cp->irq_arr[0].status_blk = (void *)
+		((unsigned long) bnapi->status_blk.msi +
+		(BNX2_SBLK_MSIX_ALIGN_SIZE * sb_id));
+	cp->irq_arr[0].status_blk_num = sb_id;
+	cp->num_irq = 1;
+}
+
+static int bnx2_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+			      void *data)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (ops == NULL)
+		return -EINVAL;
+
+	if (cp->drv_state & CNIC_DRV_STATE_REGD)
+		return -EBUSY;
+
+	bp->cnic_data = data;
+	rcu_assign_pointer(bp->cnic_ops, ops);
+
+	cp->num_irq = 0;
+	cp->drv_state = CNIC_DRV_STATE_REGD;
+
+	bnx2_setup_cnic_irq_info(bp);
+
+	return 0;
+}
+
+static int bnx2_unregister_cnic(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_state = 0;
+	bnapi->cnic_present = 0;
+	rcu_assign_pointer(bp->cnic_ops, NULL);
+	synchronize_rcu();
+	return 0;
+}
+
+struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_owner = THIS_MODULE;
+	cp->chip_id = bp->chip_id;
+	cp->pdev = bp->pdev;
+	cp->io_base = bp->regview;
+	cp->drv_ctl = bnx2_drv_ctl;
+	cp->drv_register_cnic = bnx2_register_cnic;
+	cp->drv_unregister_cnic = bnx2_unregister_cnic;
+
+	return cp;
+}
+EXPORT_SYMBOL(bnx2_cnic_probe);
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+	struct cnic_ops *c_ops;
+	struct cnic_ctl_info info;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops) {
+		info.cmd = CNIC_CTL_STOP_CMD;
+		c_ops->cnic_ctl(bp->cnic_data, &info);
+	}
+	rcu_read_unlock();
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+	struct cnic_ops *c_ops;
+	struct cnic_ctl_info info;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops) {
+		if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
+			struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+
+			bnapi->cnic_tag = bnapi->last_status_idx;
+		}
+		info.cmd = CNIC_CTL_START_CMD;
+		c_ops->cnic_ctl(bp->cnic_data, &info);
+	}
+	rcu_read_unlock();
+}
+
+#else
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+}
+
+#endif
+
 static int
 bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val)
 {
@@ -488,6 +644,7 @@ bnx2_napi_enable(struct bnx2 *bp)
 static void
 bnx2_netif_stop(struct bnx2 *bp)
 {
+	bnx2_cnic_stop(bp);
 	bnx2_disable_int_sync(bp);
 	if (netif_running(bp->dev)) {
 		bnx2_napi_disable(bp);
@@ -504,6 +661,7 @@ bnx2_netif_start(struct bnx2 *bp)
 			netif_tx_wake_all_queues(bp->dev);
 			bnx2_napi_enable(bp);
 			bnx2_enable_int(bp);
+			bnx2_cnic_start(bp);
 		}
 	}
 }
@@ -3164,6 +3322,11 @@ bnx2_has_work(struct bnx2_napi *bnapi)
 	if (bnx2_has_fast_work(bnapi))
 		return 1;
 
+#ifdef BCM_CNIC
+	if (bnapi->cnic_present && (bnapi->cnic_tag != sblk->status_idx))
+		return 1;
+#endif
+
 	if ((sblk->status_attn_bits & STATUS_ATTN_EVENTS) !=
 	    (sblk->status_attn_bits_ack & STATUS_ATTN_EVENTS))
 		return 1;
@@ -3193,6 +3356,23 @@ bnx2_chk_missed_msi(struct bnx2 *bp)
 	bp->idle_chk_status_idx = bnapi->last_status_idx;
 }
 
+#ifdef BCM_CNIC
+static void bnx2_poll_cnic(struct bnx2 *bp, struct bnx2_napi *bnapi)
+{
+	struct cnic_ops *c_ops;
+
+	if (!bnapi->cnic_present)
+		return;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops)
+		bnapi->cnic_tag = c_ops->cnic_handler(bp->cnic_data,
+						      bnapi->status_blk.msi);
+	rcu_read_unlock();
+}
+#endif
+
 static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
 {
 	struct status_block *sblk = bnapi->status_blk.msi;
@@ -3267,6 +3447,10 @@ static int bnx2_poll(struct napi_struct *napi, int budget)
 
 		work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
 
+#ifdef BCM_CNIC
+		bnx2_poll_cnic(bp, bnapi);
+#endif
+
 		/* bnapi->last_status_idx is used below to tell the hw how
 		 * much work has been processed, so we must read it before
 		 * checking for more work.
@@ -4632,8 +4816,11 @@ bnx2_init_chip(struct bnx2 *bp)
 	val = REG_RD(bp, BNX2_MQ_CONFIG);
 	val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
 	val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
-	if (CHIP_ID(bp) == CHIP_ID_5709_A0 || CHIP_ID(bp) == CHIP_ID_5709_A1)
-		val |= BNX2_MQ_CONFIG_HALT_DIS;
+	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+		val |= BNX2_MQ_CONFIG_BIN_MQ_MODE;
+		if (CHIP_REV(bp) == CHIP_REV_Ax)
+			val |= BNX2_MQ_CONFIG_HALT_DIS;
+	}
 
 	REG_WR(bp, BNX2_MQ_CONFIG, val);
 
@@ -7471,7 +7658,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	INIT_WORK(&bp->reset_task, bnx2_reset_task);
 
 	dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
-	mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS);
+	mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS + 1);
 	dev->mem_end = dev->mem_start + mem_len;
 	dev->irq = pdev->irq;
 
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 5b570e17c83..a1ff739bc9b 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,6 +361,9 @@ struct l2_fhdr {
 #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE	 (1<<28)
 
 #define BNX2_L2CTX_HOST_BDIDX				0x00000004
+#define BNX2_L2CTX_STATUSB_NUM_SHIFT			 16
+#define BNX2_L2CTX_STATUSB_NUM(sb_id)			 \
+	(((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
 #define BNX2_L2CTX_HOST_BSEQ				0x00000008
 #define BNX2_L2CTX_NX_BSEQ				0x0000000c
 #define BNX2_L2CTX_NX_BDHADDR_HI			0x00000010
@@ -5900,6 +5903,7 @@ struct l2_fhdr {
 #define BNX2_RXP_FTQ_CTL_CUR_DEPTH			 (0x3ffL<<22)
 
 #define BNX2_RXP_SCRATCH				0x000e0000
+#define BNX2_RXP_SCRATCH_RXP_FLOOD			 0x000e0024
 #define BNX2_RXP_SCRATCH_RSS_TBL_SZ			 0x000e0038
 #define BNX2_RXP_SCRATCH_RSS_TBL			 0x000e003c
 #define BNX2_RXP_SCRATCH_RSS_TBL_MAX_ENTRIES		 128
@@ -6678,6 +6682,11 @@ struct bnx2_napi {
 	u32 			last_status_idx;
 	u32			int_num;
 
+#ifdef BCM_CNIC
+	u32			cnic_tag;
+	int			cnic_present;
+#endif
+
 	struct bnx2_rx_ring_info	rx_ring;
 	struct bnx2_tx_ring_info	tx_ring;
 };
@@ -6727,6 +6736,11 @@ struct bnx2 {
 	int		tx_ring_size;
 	u32		tx_wake_thresh;
 
+#ifdef BCM_CNIC
+	struct cnic_ops		*cnic_ops;
+	void			*cnic_data;
+#endif
+
 	/* End of fields used in the performance code paths. */
 
 	unsigned int		current_interval;
@@ -6885,6 +6899,10 @@ struct bnx2 {
 
 	u32			idle_chk_status_idx;
 
+#ifdef BCM_CNIC
+	struct cnic_eth_dev	cnic_eth_dev;
+#endif
+
 	const struct firmware	*mips_firmware;
 	const struct firmware	*rv2p_firmware;
 };
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 8c2e5ab51f0..faf094abef7 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best,
 	return best;
 }
 
+static int agg_device_up(const struct aggregator *agg)
+{
+	return (netif_running(agg->slave->dev) &&
+		netif_carrier_ok(agg->slave->dev));
+}
+
 /**
  * ad_agg_selection_logic - select an aggregation group for a team
  * @aggregator: the aggregator we're looking at
@@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg)
 	struct port *port;
 
 	origin = agg;
-
 	active = __get_active_agg(agg);
-	best = active;
+	best = (active && agg_device_up(active)) ? active : NULL;
 
 	do {
 		agg->is_active = 0;
 
-		if (agg->num_of_ports)
+		if (agg->num_of_ports && agg_device_up(agg))
 			best = ad_agg_selection_test(best, agg);
 
 	} while ((agg = __get_next_agg(agg)));
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
new file mode 100644
index 00000000000..44f77eb1180
--- /dev/null
+++ b/drivers/net/cnic.c
@@ -0,0 +1,2717 @@
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Original skeleton written by: John(Zongxi) Chen (zongxi@broadcom.com)
+ * Modified and maintained by: Michael Chan <mchan@broadcom.com>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/uio_driver.h>
+#include <linux/in.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/module.h>
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN 1
+#endif
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <net/route.h>
+#include <net/ipv6.h>
+#include <net/ip6_route.h>
+#include <scsi/iscsi_if.h>
+
+#include "cnic_if.h"
+#include "bnx2.h"
+#include "cnic.h"
+#include "cnic_defs.h"
+
+#define DRV_MODULE_NAME		"cnic"
+#define PFX DRV_MODULE_NAME	": "
+
+static char version[] __devinitdata =
+	"Broadcom NetXtreme II CNIC Driver " DRV_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
+
+MODULE_AUTHOR("Michael Chan <mchan@broadcom.com> and John(Zongxi) "
+	      "Chen (zongxi@broadcom.com");
+MODULE_DESCRIPTION("Broadcom NetXtreme II CNIC Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CNIC_MODULE_VERSION);
+
+static LIST_HEAD(cnic_dev_list);
+static DEFINE_RWLOCK(cnic_dev_lock);
+static DEFINE_MUTEX(cnic_lock);
+
+static struct cnic_ulp_ops *cnic_ulp_tbl[MAX_CNIC_ULP_TYPE];
+
+static int cnic_service_bnx2(void *, void *);
+static int cnic_ctl(void *, struct cnic_ctl_info *);
+
+static struct cnic_ops cnic_bnx2_ops = {
+	.cnic_owner	= THIS_MODULE,
+	.cnic_handler	= cnic_service_bnx2,
+	.cnic_ctl	= cnic_ctl,
+};
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *);
+static int cnic_cm_set_pg(struct cnic_sock *);
+
+static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode)
+{
+	struct cnic_dev *dev = uinfo->priv;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (cp->uio_dev != -1)
+		return -EBUSY;
+
+	cp->uio_dev = iminor(inode);
+
+	cnic_shutdown_bnx2_rx_ring(dev);
+
+	cnic_init_bnx2_tx_ring(dev);
+	cnic_init_bnx2_rx_ring(dev);
+
+	return 0;
+}
+
+static int cnic_uio_close(struct uio_info *uinfo, struct inode *inode)
+{
+	struct cnic_dev *dev = uinfo->priv;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cp->uio_dev = -1;
+	return 0;
+}
+
+static inline void cnic_hold(struct cnic_dev *dev)
+{
+	atomic_inc(&dev->ref_count);
+}
+
+static inline void cnic_put(struct cnic_dev *dev)
+{
+	atomic_dec(&dev->ref_count);
+}
+
+static inline void csk_hold(struct cnic_sock *csk)
+{
+	atomic_inc(&csk->ref_count);
+}
+
+static inline void csk_put(struct cnic_sock *csk)
+{
+	atomic_dec(&csk->ref_count);
+}
+
+static struct cnic_dev *cnic_from_netdev(struct net_device *netdev)
+{
+	struct cnic_dev *cdev;
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(cdev, &cnic_dev_list, list) {
+		if (netdev == cdev->netdev) {
+			cnic_hold(cdev);
+			read_unlock(&cnic_dev_lock);
+			return cdev;
+		}
+	}
+	read_unlock(&cnic_dev_lock);
+	return NULL;
+}
+
+static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_CTX_WR_CMD;
+	io->cid_addr = cid_addr;
+	io->offset = off;
+	io->data = val;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static void cnic_reg_wr_ind(struct cnic_dev *dev, u32 off, u32 val)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_IO_WR_CMD;
+	io->offset = off;
+	io->data = val;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static u32 cnic_reg_rd_ind(struct cnic_dev *dev, u32 off)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_IO_RD_CMD;
+	io->offset = off;
+	ethdev->drv_ctl(dev->netdev, &info);
+	return io->data;
+}
+
+static int cnic_in_use(struct cnic_sock *csk)
+{
+	return test_bit(SK_F_INUSE, &csk->flags);
+}
+
+static void cnic_kwq_completion(struct cnic_dev *dev, u32 count)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+
+	info.cmd = DRV_CTL_COMPLETION_CMD;
+	info.data.comp.comp_count = count;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
+			   struct cnic_sock *csk)
+{
+	struct iscsi_path path_req;
+	char *buf = NULL;
+	u16 len = 0;
+	u32 msg_type = ISCSI_KEVENT_IF_DOWN;
+	struct cnic_ulp_ops *ulp_ops;
+
+	if (cp->uio_dev == -1)
+		return -ENODEV;
+
+	if (csk) {
+		len = sizeof(path_req);
+		buf = (char *) &path_req;
+		memset(&path_req, 0, len);
+
+		msg_type = ISCSI_KEVENT_PATH_REQ;
+		path_req.handle = (u64) csk->l5_cid;
+		if (test_bit(SK_F_IPV6, &csk->flags)) {
+			memcpy(&path_req.dst.v6_addr, &csk->dst_ip[0],
+			       sizeof(struct in6_addr));
+			path_req.ip_addr_len = 16;
+		} else {
+			memcpy(&path_req.dst.v4_addr, &csk->dst_ip[0],
+			       sizeof(struct in_addr));
+			path_req.ip_addr_len = 4;
+		}
+		path_req.vlan_id = csk->vlan_id;
+		path_req.pmtu = csk->mtu;
+	}
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+	if (ulp_ops)
+		ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
+	rcu_read_unlock();
+	return 0;
+}
+
+static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
+				  char *buf, u16 len)
+{
+	int rc = -EINVAL;
+
+	switch (msg_type) {
+	case ISCSI_UEVENT_PATH_UPDATE: {
+		struct cnic_local *cp;
+		u32 l5_cid;
+		struct cnic_sock *csk;
+		struct iscsi_path *path_resp;
+
+		if (len < sizeof(*path_resp))
+			break;
+
+		path_resp = (struct iscsi_path *) buf;
+		cp = dev->cnic_priv;
+		l5_cid = (u32) path_resp->handle;
+		if (l5_cid >= MAX_CM_SK_TBL_SZ)
+			break;
+
+		csk = &cp->csk_tbl[l5_cid];
+		csk_hold(csk);
+		if (cnic_in_use(csk)) {
+			memcpy(csk->ha, path_resp->mac_addr, 6);
+			if (test_bit(SK_F_IPV6, &csk->flags))
+				memcpy(&csk->src_ip[0], &path_resp->src.v6_addr,
+				       sizeof(struct in6_addr));
+			else
+				memcpy(&csk->src_ip[0], &path_resp->src.v4_addr,
+				       sizeof(struct in_addr));
+			if (is_valid_ether_addr(csk->ha))
+				cnic_cm_set_pg(csk);
+		}
+		csk_put(csk);
+		rc = 0;
+	}
+	}
+
+	return rc;
+}
+
+static int cnic_offld_prep(struct cnic_sock *csk)
+{
+	if (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+		return 0;
+
+	if (!test_bit(SK_F_CONNECT_START, &csk->flags)) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int cnic_close_prep(struct cnic_sock *csk)
+{
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	smp_mb__after_clear_bit();
+
+	if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+		while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+			msleep(1);
+
+		return 1;
+	}
+	return 0;
+}
+
+static int cnic_abort_prep(struct cnic_sock *csk)
+{
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	smp_mb__after_clear_bit();
+
+	while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+		msleep(1);
+
+	if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+		csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+		return 1;
+	}
+
+	return 0;
+}
+
+int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
+{
+	struct cnic_dev *dev;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (cnic_ulp_tbl[ulp_type]) {
+		printk(KERN_ERR PFX "cnic_register_driver: Type %d has already "
+				    "been registered\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EBUSY;
+	}
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		clear_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]);
+	}
+	read_unlock(&cnic_dev_lock);
+
+	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
+	mutex_unlock(&cnic_lock);
+
+	/* Prevent race conditions with netdev_event */
+	rtnl_lock();
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]))
+			ulp_ops->cnic_init(dev);
+	}
+	read_unlock(&cnic_dev_lock);
+	rtnl_unlock();
+
+	return 0;
+}
+
+int cnic_unregister_driver(int ulp_type)
+{
+	struct cnic_dev *dev;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (!cnic_ulp_tbl[ulp_type]) {
+		printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
+				    "been registered\n", ulp_type);
+		goto out_unlock;
+	}
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+			printk(KERN_ERR PFX "cnic_unregister_driver: Type %d "
+			       "still has devices registered\n", ulp_type);
+			read_unlock(&cnic_dev_lock);
+			goto out_unlock;
+		}
+	}
+	read_unlock(&cnic_dev_lock);
+
+	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
+
+	mutex_unlock(&cnic_lock);
+	synchronize_rcu();
+	return 0;
+
+out_unlock:
+	mutex_unlock(&cnic_lock);
+	return -EINVAL;
+}
+
+static int cnic_start_hw(struct cnic_dev *);
+static void cnic_stop_hw(struct cnic_dev *);
+
+static int cnic_register_device(struct cnic_dev *dev, int ulp_type,
+				void *ulp_ctx)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_ulp_ops *ulp_ops;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (cnic_ulp_tbl[ulp_type] == NULL) {
+		printk(KERN_ERR PFX "cnic_register_device: Driver with type %d "
+				    "has not been registered\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EAGAIN;
+	}
+	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+		printk(KERN_ERR PFX "cnic_register_device: Type %d has already "
+		       "been registered to this device\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EBUSY;
+	}
+
+	clear_bit(ULP_F_START, &cp->ulp_flags[ulp_type]);
+	cp->ulp_handle[ulp_type] = ulp_ctx;
+	ulp_ops = cnic_ulp_tbl[ulp_type];
+	rcu_assign_pointer(cp->ulp_ops[ulp_type], ulp_ops);
+	cnic_hold(dev);
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[ulp_type]))
+			ulp_ops->cnic_start(cp->ulp_handle[ulp_type]);
+
+	mutex_unlock(&cnic_lock);
+
+	return 0;
+
+}
+EXPORT_SYMBOL(cnic_register_driver);
+
+static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
+		       ulp_type);
+		return -EINVAL;
+	}
+	mutex_lock(&cnic_lock);
+	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+		rcu_assign_pointer(cp->ulp_ops[ulp_type], NULL);
+		cnic_put(dev);
+	} else {
+		printk(KERN_ERR PFX "cnic_unregister_device: device not "
+		       "registered to this ulp type %d\n", ulp_type);
+		mutex_unlock(&cnic_lock);
+		return -EINVAL;
+	}
+	mutex_unlock(&cnic_lock);
+
+	synchronize_rcu();
+
+	return 0;
+}
+EXPORT_SYMBOL(cnic_unregister_driver);
+
+static int cnic_init_id_tbl(struct cnic_id_tbl *id_tbl, u32 size, u32 start_id)
+{
+	id_tbl->start = start_id;
+	id_tbl->max = size;
+	id_tbl->next = 0;
+	spin_lock_init(&id_tbl->lock);
+	id_tbl->table = kzalloc(DIV_ROUND_UP(size, 32) * 4, GFP_KERNEL);
+	if (!id_tbl->table)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void cnic_free_id_tbl(struct cnic_id_tbl *id_tbl)
+{
+	kfree(id_tbl->table);
+	id_tbl->table = NULL;
+}
+
+static int cnic_alloc_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+	int ret = -1;
+
+	id -= id_tbl->start;
+	if (id >= id_tbl->max)
+		return ret;
+
+	spin_lock(&id_tbl->lock);
+	if (!test_bit(id, id_tbl->table)) {
+		set_bit(id, id_tbl->table);
+		ret = 0;
+	}
+	spin_unlock(&id_tbl->lock);
+	return ret;
+}
+
+/* Returns -1 if not successful */
+static u32 cnic_alloc_new_id(struct cnic_id_tbl *id_tbl)
+{
+	u32 id;
+
+	spin_lock(&id_tbl->lock);
+	id = find_next_zero_bit(id_tbl->table, id_tbl->max, id_tbl->next);
+	if (id >= id_tbl->max) {
+		id = -1;
+		if (id_tbl->next != 0) {
+			id = find_first_zero_bit(id_tbl->table, id_tbl->next);
+			if (id >= id_tbl->next)
+				id = -1;
+		}
+	}
+
+	if (id < id_tbl->max) {
+		set_bit(id, id_tbl->table);
+		id_tbl->next = (id + 1) & (id_tbl->max - 1);
+		id += id_tbl->start;
+	}
+
+	spin_unlock(&id_tbl->lock);
+
+	return id;
+}
+
+static void cnic_free_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+	if (id == -1)
+		return;
+
+	id -= id_tbl->start;
+	if (id >= id_tbl->max)
+		return;
+
+	clear_bit(id, id_tbl->table);
+}
+
+static void cnic_free_dma(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+
+	if (!dma->pg_arr)
+		return;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		if (dma->pg_arr[i]) {
+			pci_free_consistent(dev->pcidev, BCM_PAGE_SIZE,
+					    dma->pg_arr[i], dma->pg_map_arr[i]);
+			dma->pg_arr[i] = NULL;
+		}
+	}
+	if (dma->pgtbl) {
+		pci_free_consistent(dev->pcidev, dma->pgtbl_size,
+				    dma->pgtbl, dma->pgtbl_map);
+		dma->pgtbl = NULL;
+	}
+	kfree(dma->pg_arr);
+	dma->pg_arr = NULL;
+	dma->num_pages = 0;
+}
+
+static void cnic_setup_page_tbl(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+	u32 *page_table = dma->pgtbl;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		/* Each entry needs to be in big endian format. */
+		*page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32);
+		page_table++;
+		*page_table = (u32) dma->pg_map_arr[i];
+		page_table++;
+	}
+}
+
+static int cnic_alloc_dma(struct cnic_dev *dev, struct cnic_dma *dma,
+			  int pages, int use_pg_tbl)
+{
+	int i, size;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	size = pages * (sizeof(void *) + sizeof(dma_addr_t));
+	dma->pg_arr = kzalloc(size, GFP_ATOMIC);
+	if (dma->pg_arr == NULL)
+		return -ENOMEM;
+
+	dma->pg_map_arr = (dma_addr_t *) (dma->pg_arr + pages);
+	dma->num_pages = pages;
+
+	for (i = 0; i < pages; i++) {
+		dma->pg_arr[i] = pci_alloc_consistent(dev->pcidev,
+						      BCM_PAGE_SIZE,
+						      &dma->pg_map_arr[i]);
+		if (dma->pg_arr[i] == NULL)
+			goto error;
+	}
+	if (!use_pg_tbl)
+		return 0;
+
+	dma->pgtbl_size = ((pages * 8) + BCM_PAGE_SIZE - 1) &
+			  ~(BCM_PAGE_SIZE - 1);
+	dma->pgtbl = pci_alloc_consistent(dev->pcidev, dma->pgtbl_size,
+					  &dma->pgtbl_map);
+	if (dma->pgtbl == NULL)
+		goto error;
+
+	cp->setup_pgtbl(dev, dma);
+
+	return 0;
+
+error:
+	cnic_free_dma(dev, dma);
+	return -ENOMEM;
+}
+
+static void cnic_free_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i = 0;
+
+	if (cp->cnic_uinfo) {
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+		while (cp->uio_dev != -1 && i < 15) {
+			msleep(100);
+			i++;
+		}
+		uio_unregister_device(cp->cnic_uinfo);
+		kfree(cp->cnic_uinfo);
+		cp->cnic_uinfo = NULL;
+	}
+
+	if (cp->l2_buf) {
+		pci_free_consistent(dev->pcidev, cp->l2_buf_size,
+				    cp->l2_buf, cp->l2_buf_map);
+		cp->l2_buf = NULL;
+	}
+
+	if (cp->l2_ring) {
+		pci_free_consistent(dev->pcidev, cp->l2_ring_size,
+				    cp->l2_ring, cp->l2_ring_map);
+		cp->l2_ring = NULL;
+	}
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		if (cp->ctx_arr[i].ctx) {
+			pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
+					    cp->ctx_arr[i].ctx,
+					    cp->ctx_arr[i].mapping);
+			cp->ctx_arr[i].ctx = NULL;
+		}
+	}
+	kfree(cp->ctx_arr);
+	cp->ctx_arr = NULL;
+	cp->ctx_blks = 0;
+
+	cnic_free_dma(dev, &cp->gbl_buf_info);
+	cnic_free_dma(dev, &cp->conn_buf_info);
+	cnic_free_dma(dev, &cp->kwq_info);
+	cnic_free_dma(dev, &cp->kcq_info);
+	kfree(cp->iscsi_tbl);
+	cp->iscsi_tbl = NULL;
+	kfree(cp->ctx_tbl);
+	cp->ctx_tbl = NULL;
+
+	cnic_free_id_tbl(&cp->cid_tbl);
+}
+
+static int cnic_alloc_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+		int i, k, arr_size;
+
+		cp->ctx_blk_size = BCM_PAGE_SIZE;
+		cp->cids_per_blk = BCM_PAGE_SIZE / 128;
+		arr_size = BNX2_MAX_CID / cp->cids_per_blk *
+			   sizeof(struct cnic_ctx);
+		cp->ctx_arr = kzalloc(arr_size, GFP_KERNEL);
+		if (cp->ctx_arr == NULL)
+			return -ENOMEM;
+
+		k = 0;
+		for (i = 0; i < 2; i++) {
+			u32 j, reg, off, lo, hi;
+
+			if (i == 0)
+				off = BNX2_PG_CTX_MAP;
+			else
+				off = BNX2_ISCSI_CTX_MAP;
+
+			reg = cnic_reg_rd_ind(dev, off);
+			lo = reg >> 16;
+			hi = reg & 0xffff;
+			for (j = lo; j < hi; j += cp->cids_per_blk, k++)
+				cp->ctx_arr[k].cid = j;
+		}
+
+		cp->ctx_blks = k;
+		if (cp->ctx_blks >= (BNX2_MAX_CID / cp->cids_per_blk)) {
+			cp->ctx_blks = 0;
+			return -ENOMEM;
+		}
+
+		for (i = 0; i < cp->ctx_blks; i++) {
+			cp->ctx_arr[i].ctx =
+				pci_alloc_consistent(dev->pcidev, BCM_PAGE_SIZE,
+						     &cp->ctx_arr[i].mapping);
+			if (cp->ctx_arr[i].ctx == NULL)
+				return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static int cnic_alloc_bnx2_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct uio_info *uinfo;
+	int ret;
+
+	ret = cnic_alloc_dma(dev, &cp->kwq_info, KWQ_PAGE_CNT, 1);
+	if (ret)
+		goto error;
+	cp->kwq = (struct kwqe **) cp->kwq_info.pg_arr;
+
+	ret = cnic_alloc_dma(dev, &cp->kcq_info, KCQ_PAGE_CNT, 1);
+	if (ret)
+		goto error;
+	cp->kcq = (struct kcqe **) cp->kcq_info.pg_arr;
+
+	ret = cnic_alloc_context(dev);
+	if (ret)
+		goto error;
+
+	cp->l2_ring_size = 2 * BCM_PAGE_SIZE;
+	cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
+					   &cp->l2_ring_map);
+	if (!cp->l2_ring)
+		goto error;
+
+	cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
+	cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
+	cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
+					   &cp->l2_buf_map);
+	if (!cp->l2_buf)
+		goto error;
+
+	uinfo = kzalloc(sizeof(*uinfo), GFP_ATOMIC);
+	if (!uinfo)
+		goto error;
+
+	uinfo->mem[0].addr = dev->netdev->base_addr;
+	uinfo->mem[0].internal_addr = dev->regview;
+	uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
+	uinfo->mem[0].memtype = UIO_MEM_PHYS;
+
+	uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
+	if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
+		uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
+	else
+		uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
+	uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->mem[2].addr = (unsigned long) cp->l2_ring;
+	uinfo->mem[2].size = cp->l2_ring_size;
+	uinfo->mem[2].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->mem[3].addr = (unsigned long) cp->l2_buf;
+	uinfo->mem[3].size = cp->l2_buf_size;
+	uinfo->mem[3].memtype = UIO_MEM_LOGICAL;
+
+	uinfo->name = "bnx2_cnic";
+	uinfo->version = CNIC_MODULE_VERSION;
+	uinfo->irq = UIO_IRQ_CUSTOM;
+
+	uinfo->open = cnic_uio_open;
+	uinfo->release = cnic_uio_close;
+
+	uinfo->priv = dev;
+
+	ret = uio_register_device(&dev->pcidev->dev, uinfo);
+	if (ret) {
+		kfree(uinfo);
+		goto error;
+	}
+
+	cp->cnic_uinfo = uinfo;
+
+	return 0;
+
+error:
+	cnic_free_resc(dev);
+	return ret;
+}
+
+static inline u32 cnic_kwq_avail(struct cnic_local *cp)
+{
+	return cp->max_kwq_idx -
+		((cp->kwq_prod_idx - cp->kwq_con_idx) & cp->max_kwq_idx);
+}
+
+static int cnic_submit_bnx2_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+				  u32 num_wqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct kwqe *prod_qe;
+	u16 prod, sw_prod, i;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2 is down */
+
+	spin_lock_bh(&cp->cnic_ulp_lock);
+	if (num_wqes > cnic_kwq_avail(cp) &&
+	    !(cp->cnic_local_flags & CNIC_LCL_FL_KWQ_INIT)) {
+		spin_unlock_bh(&cp->cnic_ulp_lock);
+		return -EAGAIN;
+	}
+
+	cp->cnic_local_flags &= ~CNIC_LCL_FL_KWQ_INIT;
+
+	prod = cp->kwq_prod_idx;
+	sw_prod = prod & MAX_KWQ_IDX;
+	for (i = 0; i < num_wqes; i++) {
+		prod_qe = &cp->kwq[KWQ_PG(sw_prod)][KWQ_IDX(sw_prod)];
+		memcpy(prod_qe, wqes[i], sizeof(struct kwqe));
+		prod++;
+		sw_prod = prod & MAX_KWQ_IDX;
+	}
+	cp->kwq_prod_idx = prod;
+
+	CNIC_WR16(dev, cp->kwq_io_addr, cp->kwq_prod_idx);
+
+	spin_unlock_bh(&cp->cnic_ulp_lock);
+	return 0;
+}
+
+static void service_kcqes(struct cnic_dev *dev, int num_cqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i, j;
+
+	i = 0;
+	j = 1;
+	while (num_cqes) {
+		struct cnic_ulp_ops *ulp_ops;
+		int ulp_type;
+		u32 kcqe_op_flag = cp->completed_kcq[i]->kcqe_op_flag;
+		u32 kcqe_layer = kcqe_op_flag & KCQE_FLAGS_LAYER_MASK;
+
+		if (unlikely(kcqe_op_flag & KCQE_RAMROD_COMPLETION))
+			cnic_kwq_completion(dev, 1);
+
+		while (j < num_cqes) {
+			u32 next_op = cp->completed_kcq[i + j]->kcqe_op_flag;
+
+			if ((next_op & KCQE_FLAGS_LAYER_MASK) != kcqe_layer)
+				break;
+
+			if (unlikely(next_op & KCQE_RAMROD_COMPLETION))
+				cnic_kwq_completion(dev, 1);
+			j++;
+		}
+
+		if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_RDMA)
+			ulp_type = CNIC_ULP_RDMA;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_ISCSI)
+			ulp_type = CNIC_ULP_ISCSI;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L4)
+			ulp_type = CNIC_ULP_L4;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
+			goto end;
+		else {
+			printk(KERN_ERR PFX "%s: Unknown type of KCQE(0x%x)\n",
+			       dev->netdev->name, kcqe_op_flag);
+			goto end;
+		}
+
+		rcu_read_lock();
+		ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+		if (likely(ulp_ops)) {
+			ulp_ops->indicate_kcqes(cp->ulp_handle[ulp_type],
+						  cp->completed_kcq + i, j);
+		}
+		rcu_read_unlock();
+end:
+		num_cqes -= j;
+		i += j;
+		j = 1;
+	}
+	return;
+}
+
+static u16 cnic_bnx2_next_idx(u16 idx)
+{
+	return idx + 1;
+}
+
+static u16 cnic_bnx2_hw_idx(u16 idx)
+{
+	return idx;
+}
+
+static int cnic_get_kcqes(struct cnic_dev *dev, u16 hw_prod, u16 *sw_prod)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 i, ri, last;
+	struct kcqe *kcqe;
+	int kcqe_cnt = 0, last_cnt = 0;
+
+	i = ri = last = *sw_prod;
+	ri &= MAX_KCQ_IDX;
+
+	while ((i != hw_prod) && (kcqe_cnt < MAX_COMPLETED_KCQE)) {
+		kcqe = &cp->kcq[KCQ_PG(ri)][KCQ_IDX(ri)];
+		cp->completed_kcq[kcqe_cnt++] = kcqe;
+		i = cp->next_idx(i);
+		ri = i & MAX_KCQ_IDX;
+		if (likely(!(kcqe->kcqe_op_flag & KCQE_FLAGS_NEXT))) {
+			last_cnt = kcqe_cnt;
+			last = i;
+		}
+	}
+
+	*sw_prod = last;
+	return last_cnt;
+}
+
+static void cnic_chk_bnx2_pkt_rings(struct cnic_local *cp)
+{
+	u16 rx_cons = *cp->rx_cons_ptr;
+	u16 tx_cons = *cp->tx_cons_ptr;
+
+	if (cp->tx_cons != tx_cons || cp->rx_cons != rx_cons) {
+		cp->tx_cons = tx_cons;
+		cp->rx_cons = rx_cons;
+		uio_event_notify(cp->cnic_uinfo);
+	}
+}
+
+static int cnic_service_bnx2(void *data, void *status_blk)
+{
+	struct cnic_dev *dev = data;
+	struct status_block *sblk = status_blk;
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 status_idx = sblk->status_idx;
+	u16 hw_prod, sw_prod;
+	int kcqe_cnt;
+
+	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		return status_idx;
+
+	cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+
+	hw_prod = sblk->status_completion_producer_index;
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that status_blk fields can change. */
+		barrier();
+		if (status_idx != sblk->status_idx) {
+			status_idx = sblk->status_idx;
+			cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+			hw_prod = sblk->status_completion_producer_index;
+		} else
+			break;
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+
+	cp->kcq_prod_idx = sw_prod;
+
+	cnic_chk_bnx2_pkt_rings(cp);
+	return status_idx;
+}
+
+static void cnic_service_bnx2_msix(unsigned long data)
+{
+	struct cnic_dev *dev = (struct cnic_dev *) data;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct status_block_msix *status_blk = cp->bnx2_status_blk;
+	u32 status_idx = status_blk->status_idx;
+	u16 hw_prod, sw_prod;
+	int kcqe_cnt;
+
+	cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+
+	hw_prod = status_blk->status_completion_producer_index;
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that status_blk fields can change. */
+		barrier();
+		if (status_idx != status_blk->status_idx) {
+			status_idx = status_blk->status_idx;
+			cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+			hw_prod = status_blk->status_completion_producer_index;
+		} else
+			break;
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+	cp->kcq_prod_idx = sw_prod;
+
+	cnic_chk_bnx2_pkt_rings(cp);
+
+	cp->last_status_idx = status_idx;
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static irqreturn_t cnic_irq(int irq, void *dev_instance)
+{
+	struct cnic_dev *dev = dev_instance;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
+
+	if (cp->ack_int)
+		cp->ack_int(dev);
+
+	prefetch(cp->status_blk);
+	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+
+	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		tasklet_schedule(&cp->cnic_irq_task);
+
+	return IRQ_HANDLED;
+}
+
+static void cnic_ulp_stop(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	rcu_read_lock();
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+		if (!ulp_ops)
+			continue;
+
+		if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+			ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+	}
+	rcu_read_unlock();
+}
+
+static void cnic_ulp_start(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	rcu_read_lock();
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+		if (!ulp_ops || !ulp_ops->cnic_start)
+			continue;
+
+		if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+			ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_ctl(void *data, struct cnic_ctl_info *info)
+{
+	struct cnic_dev *dev = data;
+
+	switch (info->cmd) {
+	case CNIC_CTL_STOP_CMD:
+		cnic_hold(dev);
+		mutex_lock(&cnic_lock);
+
+		cnic_ulp_stop(dev);
+		cnic_stop_hw(dev);
+
+		mutex_unlock(&cnic_lock);
+		cnic_put(dev);
+		break;
+	case CNIC_CTL_START_CMD:
+		cnic_hold(dev);
+		mutex_lock(&cnic_lock);
+
+		if (!cnic_start_hw(dev))
+			cnic_ulp_start(dev);
+
+		mutex_unlock(&cnic_lock);
+		cnic_put(dev);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void cnic_ulp_init(struct cnic_dev *dev)
+{
+	int i;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	rcu_read_lock();
+	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+		if (!ulp_ops || !ulp_ops->cnic_init)
+			continue;
+
+		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+			ulp_ops->cnic_init(dev);
+
+	}
+	rcu_read_unlock();
+}
+
+static void cnic_ulp_exit(struct cnic_dev *dev)
+{
+	int i;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	rcu_read_lock();
+	for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+		struct cnic_ulp_ops *ulp_ops;
+
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+		if (!ulp_ops || !ulp_ops->cnic_exit)
+			continue;
+
+		if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+			ulp_ops->cnic_exit(dev);
+
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_cm_offload_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_offload_pg *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_offload_pg *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_OFFLOAD_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT;
+	l4kwqe->l2hdr_nbytes = ETH_HLEN;
+
+	l4kwqe->da0 = csk->ha[0];
+	l4kwqe->da1 = csk->ha[1];
+	l4kwqe->da2 = csk->ha[2];
+	l4kwqe->da3 = csk->ha[3];
+	l4kwqe->da4 = csk->ha[4];
+	l4kwqe->da5 = csk->ha[5];
+
+	l4kwqe->sa0 = dev->mac_addr[0];
+	l4kwqe->sa1 = dev->mac_addr[1];
+	l4kwqe->sa2 = dev->mac_addr[2];
+	l4kwqe->sa3 = dev->mac_addr[3];
+	l4kwqe->sa4 = dev->mac_addr[4];
+	l4kwqe->sa5 = dev->mac_addr[5];
+
+	l4kwqe->etype = ETH_P_IP;
+	l4kwqe->ipid_count = DEF_IPID_COUNT;
+	l4kwqe->host_opaque = csk->l5_cid;
+
+	if (csk->vlan_id) {
+		l4kwqe->pg_flags |= L4_KWQ_OFFLOAD_PG_VLAN_TAGGING;
+		l4kwqe->vlan_tag = csk->vlan_id;
+		l4kwqe->l2hdr_nbytes += 4;
+	}
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_update_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_update_pg *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_update_pg *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPDATE_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT;
+	l4kwqe->pg_cid = csk->pg_cid;
+
+	l4kwqe->da0 = csk->ha[0];
+	l4kwqe->da1 = csk->ha[1];
+	l4kwqe->da2 = csk->ha[2];
+	l4kwqe->da3 = csk->ha[3];
+	l4kwqe->da4 = csk->ha[4];
+	l4kwqe->da5 = csk->ha[5];
+
+	l4kwqe->pg_host_opaque = csk->l5_cid;
+	l4kwqe->pg_valids = L4_KWQ_UPDATE_PG_VALIDS_DA;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_upload_pg(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_upload *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_upload *) &csk->kwqe1;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPLOAD_PG;
+	l4kwqe->flags =
+		L4_LAYER_CODE << L4_KWQ_UPLOAD_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->pg_cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_conn_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_connect_req1 *l4kwqe1;
+	struct l4_kwq_connect_req2 *l4kwqe2;
+	struct l4_kwq_connect_req3 *l4kwqe3;
+	struct kwqe *wqes[3];
+	u8 tcp_flags = 0;
+	int num_wqes = 2;
+
+	l4kwqe1 = (struct l4_kwq_connect_req1 *) &csk->kwqe1;
+	l4kwqe2 = (struct l4_kwq_connect_req2 *) &csk->kwqe2;
+	l4kwqe3 = (struct l4_kwq_connect_req3 *) &csk->kwqe3;
+	memset(l4kwqe1, 0, sizeof(*l4kwqe1));
+	memset(l4kwqe2, 0, sizeof(*l4kwqe2));
+	memset(l4kwqe3, 0, sizeof(*l4kwqe3));
+
+	l4kwqe3->op_code = L4_KWQE_OPCODE_VALUE_CONNECT3;
+	l4kwqe3->flags =
+		L4_LAYER_CODE << L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT;
+	l4kwqe3->ka_timeout = csk->ka_timeout;
+	l4kwqe3->ka_interval = csk->ka_interval;
+	l4kwqe3->ka_max_probe_count = csk->ka_max_probe_count;
+	l4kwqe3->tos = csk->tos;
+	l4kwqe3->ttl = csk->ttl;
+	l4kwqe3->snd_seq_scale = csk->snd_seq_scale;
+	l4kwqe3->pmtu = csk->mtu;
+	l4kwqe3->rcv_buf = csk->rcv_buf;
+	l4kwqe3->snd_buf = csk->snd_buf;
+	l4kwqe3->seed = csk->seed;
+
+	wqes[0] = (struct kwqe *) l4kwqe1;
+	if (test_bit(SK_F_IPV6, &csk->flags)) {
+		wqes[1] = (struct kwqe *) l4kwqe2;
+		wqes[2] = (struct kwqe *) l4kwqe3;
+		num_wqes = 3;
+
+		l4kwqe1->conn_flags = L4_KWQ_CONNECT_REQ1_IP_V6;
+		l4kwqe2->op_code = L4_KWQE_OPCODE_VALUE_CONNECT2;
+		l4kwqe2->flags =
+			L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT |
+			L4_LAYER_CODE << L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT;
+		l4kwqe2->src_ip_v6_2 = be32_to_cpu(csk->src_ip[1]);
+		l4kwqe2->src_ip_v6_3 = be32_to_cpu(csk->src_ip[2]);
+		l4kwqe2->src_ip_v6_4 = be32_to_cpu(csk->src_ip[3]);
+		l4kwqe2->dst_ip_v6_2 = be32_to_cpu(csk->dst_ip[1]);
+		l4kwqe2->dst_ip_v6_3 = be32_to_cpu(csk->dst_ip[2]);
+		l4kwqe2->dst_ip_v6_4 = be32_to_cpu(csk->dst_ip[3]);
+		l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct ipv6hdr) -
+			       sizeof(struct tcphdr);
+	} else {
+		wqes[1] = (struct kwqe *) l4kwqe3;
+		l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct iphdr) -
+			       sizeof(struct tcphdr);
+	}
+
+	l4kwqe1->op_code = L4_KWQE_OPCODE_VALUE_CONNECT1;
+	l4kwqe1->flags =
+		(L4_LAYER_CODE << L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT) |
+		 L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT;
+	l4kwqe1->cid = csk->cid;
+	l4kwqe1->pg_cid = csk->pg_cid;
+	l4kwqe1->src_ip = be32_to_cpu(csk->src_ip[0]);
+	l4kwqe1->dst_ip = be32_to_cpu(csk->dst_ip[0]);
+	l4kwqe1->src_port = be16_to_cpu(csk->src_port);
+	l4kwqe1->dst_port = be16_to_cpu(csk->dst_port);
+	if (csk->tcp_flags & SK_TCP_NO_DELAY_ACK)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK;
+	if (csk->tcp_flags & SK_TCP_KEEP_ALIVE)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_KEEP_ALIVE;
+	if (csk->tcp_flags & SK_TCP_NAGLE)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE;
+	if (csk->tcp_flags & SK_TCP_TIMESTAMP)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_TIME_STAMP;
+	if (csk->tcp_flags & SK_TCP_SACK)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_SACK;
+	if (csk->tcp_flags & SK_TCP_SEG_SCALING)
+		tcp_flags |= L4_KWQ_CONNECT_REQ1_SEG_SCALING;
+
+	l4kwqe1->tcp_flags = tcp_flags;
+
+	return dev->submit_kwqes(dev, wqes, num_wqes);
+}
+
+static int cnic_cm_close_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_close_req *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_close_req *) &csk->kwqe2;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_CLOSE;
+	l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_abort_req(struct cnic_sock *csk)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct l4_kwq_reset_req *l4kwqe;
+	struct kwqe *wqes[1];
+
+	l4kwqe = (struct l4_kwq_reset_req *) &csk->kwqe2;
+	memset(l4kwqe, 0, sizeof(*l4kwqe));
+	wqes[0] = (struct kwqe *) l4kwqe;
+
+	l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_RESET;
+	l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT;
+	l4kwqe->cid = csk->cid;
+
+	return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_create(struct cnic_dev *dev, int ulp_type, u32 cid,
+			  u32 l5_cid, struct cnic_sock **csk, void *context)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_sock *csk1;
+
+	if (l5_cid >= MAX_CM_SK_TBL_SZ)
+		return -EINVAL;
+
+	csk1 = &cp->csk_tbl[l5_cid];
+	if (atomic_read(&csk1->ref_count))
+		return -EAGAIN;
+
+	if (test_and_set_bit(SK_F_INUSE, &csk1->flags))
+		return -EBUSY;
+
+	csk1->dev = dev;
+	csk1->cid = cid;
+	csk1->l5_cid = l5_cid;
+	csk1->ulp_type = ulp_type;
+	csk1->context = context;
+
+	csk1->ka_timeout = DEF_KA_TIMEOUT;
+	csk1->ka_interval = DEF_KA_INTERVAL;
+	csk1->ka_max_probe_count = DEF_KA_MAX_PROBE_COUNT;
+	csk1->tos = DEF_TOS;
+	csk1->ttl = DEF_TTL;
+	csk1->snd_seq_scale = DEF_SND_SEQ_SCALE;
+	csk1->rcv_buf = DEF_RCV_BUF;
+	csk1->snd_buf = DEF_SND_BUF;
+	csk1->seed = DEF_SEED;
+
+	*csk = csk1;
+	return 0;
+}
+
+static void cnic_cm_cleanup(struct cnic_sock *csk)
+{
+	if (csk->src_port) {
+		struct cnic_dev *dev = csk->dev;
+		struct cnic_local *cp = dev->cnic_priv;
+
+		cnic_free_id(&cp->csk_port_tbl, csk->src_port);
+		csk->src_port = 0;
+	}
+}
+
+static void cnic_close_conn(struct cnic_sock *csk)
+{
+	if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags)) {
+		cnic_cm_upload_pg(csk);
+		clear_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+	}
+	cnic_cm_cleanup(csk);
+}
+
+static int cnic_cm_destroy(struct cnic_sock *csk)
+{
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	csk_hold(csk);
+	clear_bit(SK_F_INUSE, &csk->flags);
+	smp_mb__after_clear_bit();
+	while (atomic_read(&csk->ref_count) != 1)
+		msleep(1);
+	cnic_cm_cleanup(csk);
+
+	csk->flags = 0;
+	csk_put(csk);
+	return 0;
+}
+
+static inline u16 cnic_get_vlan(struct net_device *dev,
+				struct net_device **vlan_dev)
+{
+	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+		*vlan_dev = vlan_dev_real_dev(dev);
+		return vlan_dev_vlan_id(dev);
+	}
+	*vlan_dev = dev;
+	return 0;
+}
+
+static int cnic_get_v4_route(struct sockaddr_in *dst_addr,
+			     struct dst_entry **dst)
+{
+#if defined(CONFIG_INET)
+	struct flowi fl;
+	int err;
+	struct rtable *rt;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.nl_u.ip4_u.daddr = dst_addr->sin_addr.s_addr;
+
+	err = ip_route_output_key(&init_net, &rt, &fl);
+	if (!err)
+		*dst = &rt->u.dst;
+	return err;
+#else
+	return -ENETUNREACH;
+#endif
+}
+
+static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
+			     struct dst_entry **dst)
+{
+#if defined(CONFIG_IPV6) || (defined(CONFIG_IPV6_MODULE) && defined(MODULE))
+	struct flowi fl;
+
+	memset(&fl, 0, sizeof(fl));
+	ipv6_addr_copy(&fl.fl6_dst, &dst_addr->sin6_addr);
+	if (ipv6_addr_type(&fl.fl6_dst) & IPV6_ADDR_LINKLOCAL)
+		fl.oif = dst_addr->sin6_scope_id;
+
+	*dst = ip6_route_output(&init_net, NULL, &fl);
+	if (*dst)
+		return 0;
+#endif
+
+	return -ENETUNREACH;
+}
+
+static struct cnic_dev *cnic_cm_select_dev(struct sockaddr_in *dst_addr,
+					   int ulp_type)
+{
+	struct cnic_dev *dev = NULL;
+	struct dst_entry *dst;
+	struct net_device *netdev = NULL;
+	int err = -ENETUNREACH;
+
+	if (dst_addr->sin_family == AF_INET)
+		err = cnic_get_v4_route(dst_addr, &dst);
+	else if (dst_addr->sin_family == AF_INET6) {
+		struct sockaddr_in6 *dst_addr6 =
+			(struct sockaddr_in6 *) dst_addr;
+
+		err = cnic_get_v6_route(dst_addr6, &dst);
+	} else
+		return NULL;
+
+	if (err)
+		return NULL;
+
+	if (!dst->dev)
+		goto done;
+
+	cnic_get_vlan(dst->dev, &netdev);
+
+	dev = cnic_from_netdev(netdev);
+
+done:
+	dst_release(dst);
+	if (dev)
+		cnic_put(dev);
+	return dev;
+}
+
+static int cnic_resolve_addr(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	return cnic_send_nlmsg(cp, ISCSI_KEVENT_PATH_REQ, csk);
+}
+
+static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+	int is_v6, err, rc = -ENETUNREACH;
+	struct dst_entry *dst;
+	struct net_device *realdev;
+	u32 local_port;
+
+	if (saddr->local.v6.sin6_family == AF_INET6 &&
+	    saddr->remote.v6.sin6_family == AF_INET6)
+		is_v6 = 1;
+	else if (saddr->local.v4.sin_family == AF_INET &&
+		 saddr->remote.v4.sin_family == AF_INET)
+		is_v6 = 0;
+	else
+		return -EINVAL;
+
+	clear_bit(SK_F_IPV6, &csk->flags);
+
+	if (is_v6) {
+#if defined(CONFIG_IPV6) || (defined(CONFIG_IPV6_MODULE) && defined(MODULE))
+		set_bit(SK_F_IPV6, &csk->flags);
+		err = cnic_get_v6_route(&saddr->remote.v6, &dst);
+		if (err)
+			return err;
+
+		if (!dst || dst->error || !dst->dev)
+			goto err_out;
+
+		memcpy(&csk->dst_ip[0], &saddr->remote.v6.sin6_addr,
+		       sizeof(struct in6_addr));
+		csk->dst_port = saddr->remote.v6.sin6_port;
+		local_port = saddr->local.v6.sin6_port;
+#else
+		return rc;
+#endif
+
+	} else {
+		err = cnic_get_v4_route(&saddr->remote.v4, &dst);
+		if (err)
+			return err;
+
+		if (!dst || dst->error || !dst->dev)
+			goto err_out;
+
+		csk->dst_ip[0] = saddr->remote.v4.sin_addr.s_addr;
+		csk->dst_port = saddr->remote.v4.sin_port;
+		local_port = saddr->local.v4.sin_port;
+	}
+
+	csk->vlan_id = cnic_get_vlan(dst->dev, &realdev);
+	if (realdev != dev->netdev)
+		goto err_out;
+
+	if (local_port >= CNIC_LOCAL_PORT_MIN &&
+	    local_port < CNIC_LOCAL_PORT_MAX) {
+		if (cnic_alloc_id(&cp->csk_port_tbl, local_port))
+			local_port = 0;
+	} else
+		local_port = 0;
+
+	if (!local_port) {
+		local_port = cnic_alloc_new_id(&cp->csk_port_tbl);
+		if (local_port == -1) {
+			rc = -ENOMEM;
+			goto err_out;
+		}
+	}
+	csk->src_port = local_port;
+
+	csk->mtu = dst_mtu(dst);
+	rc = 0;
+
+err_out:
+	dst_release(dst);
+	return rc;
+}
+
+static void cnic_init_csk_state(struct cnic_sock *csk)
+{
+	csk->state = 0;
+	clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+	clear_bit(SK_F_CLOSING, &csk->flags);
+}
+
+static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+	int err = 0;
+
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (test_and_set_bit(SK_F_CONNECT_START, &csk->flags))
+		return -EINVAL;
+
+	cnic_init_csk_state(csk);
+
+	err = cnic_get_route(csk, saddr);
+	if (err)
+		goto err_out;
+
+	err = cnic_resolve_addr(csk, saddr);
+	if (!err)
+		return 0;
+
+err_out:
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	return err;
+}
+
+static int cnic_cm_abort(struct cnic_sock *csk)
+{
+	struct cnic_local *cp = csk->dev->cnic_priv;
+	u32 opcode;
+
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (cnic_abort_prep(csk))
+		return cnic_cm_abort_req(csk);
+
+	/* Getting here means that we haven't started connect, or
+	 * connect was not successful.
+	 */
+
+	csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+	if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+		opcode = csk->state;
+	else
+		opcode = L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD;
+	cp->close_conn(csk, opcode);
+
+	return 0;
+}
+
+static int cnic_cm_close(struct cnic_sock *csk)
+{
+	if (!cnic_in_use(csk))
+		return -EINVAL;
+
+	if (cnic_close_prep(csk)) {
+		csk->state = L4_KCQE_OPCODE_VALUE_CLOSE_COMP;
+		return cnic_cm_close_req(csk);
+	}
+	return 0;
+}
+
+static void cnic_cm_upcall(struct cnic_local *cp, struct cnic_sock *csk,
+			   u8 opcode)
+{
+	struct cnic_ulp_ops *ulp_ops;
+	int ulp_type = csk->ulp_type;
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+	if (ulp_ops) {
+		if (opcode == L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE)
+			ulp_ops->cm_connect_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)
+			ulp_ops->cm_close_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED)
+			ulp_ops->cm_remote_abort(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_COMP)
+			ulp_ops->cm_abort_complete(csk);
+		else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED)
+			ulp_ops->cm_remote_close(csk);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_cm_set_pg(struct cnic_sock *csk)
+{
+	if (cnic_offld_prep(csk)) {
+		if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+			cnic_cm_update_pg(csk);
+		else
+			cnic_cm_offload_pg(csk);
+	}
+	return 0;
+}
+
+static void cnic_cm_process_offld_pg(struct cnic_dev *dev, struct l4_kcq *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 l5_cid = kcqe->pg_host_opaque;
+	u8 opcode = kcqe->op_code;
+	struct cnic_sock *csk = &cp->csk_tbl[l5_cid];
+
+	csk_hold(csk);
+	if (!cnic_in_use(csk))
+		goto done;
+
+	if (opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		goto done;
+	}
+	csk->pg_cid = kcqe->pg_cid;
+	set_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+	cnic_cm_conn_req(csk);
+
+done:
+	csk_put(csk);
+}
+
+static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l4_kcq *l4kcqe = (struct l4_kcq *) kcqe;
+	u8 opcode = l4kcqe->op_code;
+	u32 l5_cid;
+	struct cnic_sock *csk;
+
+	if (opcode == L4_KCQE_OPCODE_VALUE_OFFLOAD_PG ||
+	    opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+		cnic_cm_process_offld_pg(dev, l4kcqe);
+		return;
+	}
+
+	l5_cid = l4kcqe->conn_id;
+	if (opcode & 0x80)
+		l5_cid = l4kcqe->cid;
+	if (l5_cid >= MAX_CM_SK_TBL_SZ)
+		return;
+
+	csk = &cp->csk_tbl[l5_cid];
+	csk_hold(csk);
+
+	if (!cnic_in_use(csk)) {
+		csk_put(csk);
+		return;
+	}
+
+	switch (opcode) {
+	case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE:
+		if (l4kcqe->status == 0)
+			set_bit(SK_F_OFFLD_COMPLETE, &csk->flags);
+
+		smp_mb__before_clear_bit();
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		cnic_cm_upcall(cp, csk, opcode);
+		break;
+
+	case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
+		if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags))
+			csk->state = opcode;
+		/* fall through */
+	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
+	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+		cp->close_conn(csk, opcode);
+		break;
+
+	case L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED:
+		cnic_cm_upcall(cp, csk, opcode);
+		break;
+	}
+	csk_put(csk);
+}
+
+static void cnic_cm_indicate_kcqe(void *data, struct kcqe *kcqe[], u32 num)
+{
+	struct cnic_dev *dev = data;
+	int i;
+
+	for (i = 0; i < num; i++)
+		cnic_cm_process_kcqe(dev, kcqe[i]);
+}
+
+static struct cnic_ulp_ops cm_ulp_ops = {
+	.indicate_kcqes		= cnic_cm_indicate_kcqe,
+};
+
+static void cnic_cm_free_mem(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	kfree(cp->csk_tbl);
+	cp->csk_tbl = NULL;
+	cnic_free_id_tbl(&cp->csk_port_tbl);
+}
+
+static int cnic_cm_alloc_mem(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cp->csk_tbl = kzalloc(sizeof(struct cnic_sock) * MAX_CM_SK_TBL_SZ,
+			      GFP_KERNEL);
+	if (!cp->csk_tbl)
+		return -ENOMEM;
+
+	if (cnic_init_id_tbl(&cp->csk_port_tbl, CNIC_LOCAL_PORT_RANGE,
+			     CNIC_LOCAL_PORT_MIN)) {
+		cnic_cm_free_mem(dev);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int cnic_ready_to_close(struct cnic_sock *csk, u32 opcode)
+{
+	if ((opcode == csk->state) ||
+	    (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED &&
+	     csk->state == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)) {
+		if (!test_and_set_bit(SK_F_CLOSING, &csk->flags))
+			return 1;
+	}
+	return 0;
+}
+
+static void cnic_close_bnx2_conn(struct cnic_sock *csk, u32 opcode)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	clear_bit(SK_F_CONNECT_START, &csk->flags);
+	if (cnic_ready_to_close(csk, opcode)) {
+		cnic_close_conn(csk);
+		cnic_cm_upcall(cp, csk, opcode);
+	}
+}
+
+static void cnic_cm_stop_bnx2_hw(struct cnic_dev *dev)
+{
+}
+
+static int cnic_cm_init_bnx2_hw(struct cnic_dev *dev)
+{
+	u32 seed;
+
+	get_random_bytes(&seed, 4);
+	cnic_ctx_wr(dev, 45, 0, seed);
+	return 0;
+}
+
+static int cnic_cm_open(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int err;
+
+	err = cnic_cm_alloc_mem(dev);
+	if (err)
+		return err;
+
+	err = cp->start_cm(dev);
+
+	if (err)
+		goto err_out;
+
+	dev->cm_create = cnic_cm_create;
+	dev->cm_destroy = cnic_cm_destroy;
+	dev->cm_connect = cnic_cm_connect;
+	dev->cm_abort = cnic_cm_abort;
+	dev->cm_close = cnic_cm_close;
+	dev->cm_select_dev = cnic_cm_select_dev;
+
+	cp->ulp_handle[CNIC_ULP_L4] = dev;
+	rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], &cm_ulp_ops);
+	return 0;
+
+err_out:
+	cnic_cm_free_mem(dev);
+	return err;
+}
+
+static int cnic_cm_shutdown(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i;
+
+	cp->stop_cm(dev);
+
+	if (!cp->csk_tbl)
+		return 0;
+
+	for (i = 0; i < MAX_CM_SK_TBL_SZ; i++) {
+		struct cnic_sock *csk = &cp->csk_tbl[i];
+
+		clear_bit(SK_F_INUSE, &csk->flags);
+		cnic_cm_cleanup(csk);
+	}
+	cnic_cm_free_mem(dev);
+
+	return 0;
+}
+
+static void cnic_init_context(struct cnic_dev *dev, u32 cid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 cid_addr;
+	int i;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5709)
+		return;
+
+	cid_addr = GET_CID_ADDR(cid);
+
+	for (i = 0; i < CTX_SIZE; i += 4)
+		cnic_ctx_wr(dev, cid_addr, i, 0);
+}
+
+static int cnic_setup_5709_context(struct cnic_dev *dev, int valid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int ret = 0, i;
+	u32 valid_bit = valid ? BNX2_CTX_HOST_PAGE_TBL_DATA0_VALID : 0;
+
+	if (CHIP_NUM(cp) != CHIP_NUM_5709)
+		return 0;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		int j;
+		u32 idx = cp->ctx_arr[i].cid / cp->cids_per_blk;
+		u32 val;
+
+		memset(cp->ctx_arr[i].ctx, 0, BCM_PAGE_SIZE);
+
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA0,
+			(cp->ctx_arr[i].mapping & 0xffffffff) | valid_bit);
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA1,
+			(u64) cp->ctx_arr[i].mapping >> 32);
+		CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL, idx |
+			BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ);
+		for (j = 0; j < 10; j++) {
+
+			val = CNIC_RD(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL);
+			if (!(val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ))
+				break;
+			udelay(5);
+		}
+		if (val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) {
+			ret = -EBUSY;
+			break;
+		}
+	}
+	return ret;
+}
+
+static void cnic_free_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		cp->disable_int_sync(dev);
+		tasklet_disable(&cp->cnic_irq_task);
+		free_irq(ethdev->irq_arr[0].vector, dev);
+	}
+}
+
+static int cnic_init_bnx2_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		int err, i = 0;
+		int sblk_num = cp->status_blk_num;
+		u32 base = ((sblk_num - 1) * BNX2_HC_SB_CONFIG_SIZE) +
+			   BNX2_HC_SB_CONFIG_1;
+
+		CNIC_WR(dev, base, BNX2_HC_SB_CONFIG_1_ONE_SHOT);
+
+		CNIC_WR(dev, base + BNX2_HC_COMP_PROD_TRIP_OFF, (2 << 16) | 8);
+		CNIC_WR(dev, base + BNX2_HC_COM_TICKS_OFF, (64 << 16) | 220);
+		CNIC_WR(dev, base + BNX2_HC_CMD_TICKS_OFF, (64 << 16) | 220);
+
+		cp->bnx2_status_blk = cp->status_blk;
+		cp->last_status_idx = cp->bnx2_status_blk->status_idx;
+		tasklet_init(&cp->cnic_irq_task, &cnic_service_bnx2_msix,
+			     (unsigned long) dev);
+		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
+				  "cnic", dev);
+		if (err) {
+			tasklet_disable(&cp->cnic_irq_task);
+			return err;
+		}
+		while (cp->bnx2_status_blk->status_completion_producer_index &&
+		       i < 10) {
+			CNIC_WR(dev, BNX2_HC_COALESCE_NOW,
+				1 << (11 + sblk_num));
+			udelay(10);
+			i++;
+			barrier();
+		}
+		if (cp->bnx2_status_blk->status_completion_producer_index) {
+			cnic_free_irq(dev);
+			goto failed;
+		}
+
+	} else {
+		struct status_block *sblk = cp->status_blk;
+		u32 hc_cmd = CNIC_RD(dev, BNX2_HC_COMMAND);
+		int i = 0;
+
+		while (sblk->status_completion_producer_index && i < 10) {
+			CNIC_WR(dev, BNX2_HC_COMMAND,
+				hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
+			udelay(10);
+			i++;
+			barrier();
+		}
+		if (sblk->status_completion_producer_index)
+			goto failed;
+
+	}
+	return 0;
+
+failed:
+	printk(KERN_ERR PFX "%s: " "KCQ index not resetting to 0.\n",
+	       dev->netdev->name);
+	return -EBUSY;
+}
+
+static void cnic_enable_bnx2_int(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+		return;
+
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static void cnic_disable_bnx2_int_sync(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+		return;
+
+	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+	CNIC_RD(dev, BNX2_PCICFG_INT_ACK_CMD);
+	synchronize_irq(ethdev->irq_arr[0].vector);
+}
+
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 cid_addr, tx_cid, sb_id;
+	u32 val, offset0, offset1, offset2, offset3;
+	int i;
+	struct tx_bd *txbd;
+	dma_addr_t buf_map;
+	struct status_block *s_blk = cp->status_blk;
+
+	sb_id = cp->status_blk_num;
+	tx_cid = 20;
+	cnic_init_context(dev, tx_cid);
+	cnic_init_context(dev, tx_cid + 1);
+	cp->tx_cons_ptr = &s_blk->status_tx_quick_consumer_index2;
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		struct status_block_msix *sblk = cp->status_blk;
+
+		tx_cid = TX_TSS_CID + sb_id - 1;
+		cnic_init_context(dev, tx_cid);
+		CNIC_WR(dev, BNX2_TSCH_TSS_CFG, (sb_id << 24) |
+			(TX_TSS_CID << 7));
+		cp->tx_cons_ptr = &sblk->status_tx_quick_consumer_index;
+	}
+	cp->tx_cons = *cp->tx_cons_ptr;
+
+	cid_addr = GET_CID_ADDR(tx_cid);
+	if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+		u32 cid_addr2 = GET_CID_ADDR(tx_cid + 4) + 0x40;
+
+		for (i = 0; i < PHY_CTX_SIZE; i += 4)
+			cnic_ctx_wr(dev, cid_addr2, i, 0);
+
+		offset0 = BNX2_L2CTX_TYPE_XI;
+		offset1 = BNX2_L2CTX_CMD_TYPE_XI;
+		offset2 = BNX2_L2CTX_TBDR_BHADDR_HI_XI;
+		offset3 = BNX2_L2CTX_TBDR_BHADDR_LO_XI;
+	} else {
+		offset0 = BNX2_L2CTX_TYPE;
+		offset1 = BNX2_L2CTX_CMD_TYPE;
+		offset2 = BNX2_L2CTX_TBDR_BHADDR_HI;
+		offset3 = BNX2_L2CTX_TBDR_BHADDR_LO;
+	}
+	val = BNX2_L2CTX_TYPE_TYPE_L2 | BNX2_L2CTX_TYPE_SIZE_L2;
+	cnic_ctx_wr(dev, cid_addr, offset0, val);
+
+	val = BNX2_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16);
+	cnic_ctx_wr(dev, cid_addr, offset1, val);
+
+	txbd = (struct tx_bd *) cp->l2_ring;
+
+	buf_map = cp->l2_buf_map;
+	for (i = 0; i < MAX_TX_DESC_CNT; i++, txbd++) {
+		txbd->tx_bd_haddr_hi = (u64) buf_map >> 32;
+		txbd->tx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+	}
+	val = (u64) cp->l2_ring_map >> 32;
+	cnic_ctx_wr(dev, cid_addr, offset2, val);
+	txbd->tx_bd_haddr_hi = val;
+
+	val = (u64) cp->l2_ring_map & 0xffffffff;
+	cnic_ctx_wr(dev, cid_addr, offset3, val);
+	txbd->tx_bd_haddr_lo = val;
+}
+
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 cid_addr, sb_id, val, coal_reg, coal_val;
+	int i;
+	struct rx_bd *rxbd;
+	struct status_block *s_blk = cp->status_blk;
+
+	sb_id = cp->status_blk_num;
+	cnic_init_context(dev, 2);
+	cp->rx_cons_ptr = &s_blk->status_rx_quick_consumer_index2;
+	coal_reg = BNX2_HC_COMMAND;
+	coal_val = CNIC_RD(dev, coal_reg);
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		struct status_block_msix *sblk = cp->status_blk;
+
+		cp->rx_cons_ptr = &sblk->status_rx_quick_consumer_index;
+		coal_reg = BNX2_HC_COALESCE_NOW;
+		coal_val = 1 << (11 + sb_id);
+	}
+	i = 0;
+	while (!(*cp->rx_cons_ptr != 0) && i < 10) {
+		CNIC_WR(dev, coal_reg, coal_val);
+		udelay(10);
+		i++;
+		barrier();
+	}
+	cp->rx_cons = *cp->rx_cons_ptr;
+
+	cid_addr = GET_CID_ADDR(2);
+	val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE |
+	      BNX2_L2CTX_CTX_TYPE_SIZE_L2 | (0x02 << 8);
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
+
+	if (sb_id == 0)
+		val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+	else
+		val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
+
+	rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
+	for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) {
+		dma_addr_t buf_map;
+		int n = (i % cp->l2_rx_ring_size) + 1;
+
+		buf_map = cp->l2_buf_map + (n * cp->l2_single_buf_size);
+		rxbd->rx_bd_len = cp->l2_single_buf_size;
+		rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END;
+		rxbd->rx_bd_haddr_hi = (u64) buf_map >> 32;
+		rxbd->rx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+	}
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) >> 32;
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_HI, val);
+	rxbd->rx_bd_haddr_hi = val;
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) & 0xffffffff;
+	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_LO, val);
+	rxbd->rx_bd_haddr_lo = val;
+
+	val = cnic_reg_rd_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD);
+	cnic_reg_wr_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD, val | (1 << 2));
+}
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *dev)
+{
+	struct kwqe *wqes[1], l2kwqe;
+
+	memset(&l2kwqe, 0, sizeof(l2kwqe));
+	wqes[0] = &l2kwqe;
+	l2kwqe.kwqe_op_flag = (L2_LAYER_CODE << KWQE_FLAGS_LAYER_SHIFT) |
+			      (L2_KWQE_OPCODE_VALUE_FLUSH <<
+			       KWQE_OPCODE_SHIFT) | 2;
+	dev->submit_kwqes(dev, wqes, 1);
+}
+
+static void cnic_set_bnx2_mac(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 val;
+
+	val = cp->func << 2;
+
+	cp->shmem_base = cnic_reg_rd_ind(dev, BNX2_SHM_HDR_ADDR_0 + val);
+
+	val = cnic_reg_rd_ind(dev, cp->shmem_base +
+			      BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER);
+	dev->mac_addr[0] = (u8) (val >> 8);
+	dev->mac_addr[1] = (u8) val;
+
+	CNIC_WR(dev, BNX2_EMAC_MAC_MATCH4, val);
+
+	val = cnic_reg_rd_ind(dev, cp->shmem_base +
+			      BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER);
+	dev->mac_addr[2] = (u8) (val >> 24);
+	dev->mac_addr[3] = (u8) (val >> 16);
+	dev->mac_addr[4] = (u8) (val >> 8);
+	dev->mac_addr[5] = (u8) val;
+
+	CNIC_WR(dev, BNX2_EMAC_MAC_MATCH5, val);
+
+	val = 4 | BNX2_RPM_SORT_USER2_BC_EN;
+	if (CHIP_NUM(cp) != CHIP_NUM_5709)
+		val |= BNX2_RPM_SORT_USER2_PROM_VLAN;
+
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, 0x0);
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, val);
+	CNIC_WR(dev, BNX2_RPM_SORT_USER2, val | BNX2_RPM_SORT_USER2_ENA);
+}
+
+static int cnic_start_bnx2_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct status_block *sblk = cp->status_blk;
+	u32 val;
+	int err;
+
+	cnic_set_bnx2_mac(dev);
+
+	val = CNIC_RD(dev, BNX2_MQ_CONFIG);
+	val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
+	if (BCM_PAGE_BITS > 12)
+		val |= (12 - 8)  << 4;
+	else
+		val |= (BCM_PAGE_BITS - 8)  << 4;
+
+	CNIC_WR(dev, BNX2_MQ_CONFIG, val);
+
+	CNIC_WR(dev, BNX2_HC_COMP_PROD_TRIP, (2 << 16) | 8);
+	CNIC_WR(dev, BNX2_HC_COM_TICKS, (64 << 16) | 220);
+	CNIC_WR(dev, BNX2_HC_CMD_TICKS, (64 << 16) | 220);
+
+	err = cnic_setup_5709_context(dev, 1);
+	if (err)
+		return err;
+
+	cnic_init_context(dev, KWQ_CID);
+	cnic_init_context(dev, KCQ_CID);
+
+	cp->kwq_cid_addr = GET_CID_ADDR(KWQ_CID);
+	cp->kwq_io_addr = MB_GET_CID_ADDR(KWQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+	cp->max_kwq_idx = MAX_KWQ_IDX;
+	cp->kwq_prod_idx = 0;
+	cp->kwq_con_idx = 0;
+	cp->cnic_local_flags |= CNIC_LCL_FL_KWQ_INIT;
+
+	if (CHIP_NUM(cp) == CHIP_NUM_5706 || CHIP_NUM(cp) == CHIP_NUM_5708)
+		cp->kwq_con_idx_ptr = &sblk->status_rx_quick_consumer_index15;
+	else
+		cp->kwq_con_idx_ptr = &sblk->status_cmd_consumer_index;
+
+	/* Initialize the kernel work queue context. */
+	val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+	      (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_TYPE, val);
+
+	val = (BCM_PAGE_SIZE / sizeof(struct kwqe) - 1) << 16;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+	val = ((BCM_PAGE_SIZE / sizeof(struct kwqe)) << 16) | KWQ_PAGE_CNT;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+	val = (u32) ((u64) cp->kwq_info.pgtbl_map >> 32);
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+	val = (u32) cp->kwq_info.pgtbl_map;
+	cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+	cp->kcq_cid_addr = GET_CID_ADDR(KCQ_CID);
+	cp->kcq_io_addr = MB_GET_CID_ADDR(KCQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+	cp->kcq_prod_idx = 0;
+
+	/* Initialize the kernel complete queue context. */
+	val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+	      (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_TYPE, val);
+
+	val = (BCM_PAGE_SIZE / sizeof(struct kcqe) - 1) << 16;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+	val = ((BCM_PAGE_SIZE / sizeof(struct kcqe)) << 16) | KCQ_PAGE_CNT;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+	val = (u32) ((u64) cp->kcq_info.pgtbl_map >> 32);
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+	val = (u32) cp->kcq_info.pgtbl_map;
+	cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+	cp->int_num = 0;
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		u32 sb_id = cp->status_blk_num;
+		u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+
+		cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
+		cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+		cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+	}
+
+	/* Enable Commnad Scheduler notification when we write to the
+	 * host producer index of the kernel contexts. */
+	CNIC_WR(dev, BNX2_MQ_KNL_CMD_MASK1, 2);
+
+	/* Enable Command Scheduler notification when we write to either
+	 * the Send Queue or Receive Queue producer indexes of the kernel
+	 * bypass contexts. */
+	CNIC_WR(dev, BNX2_MQ_KNL_BYP_CMD_MASK1, 7);
+	CNIC_WR(dev, BNX2_MQ_KNL_BYP_WRITE_MASK1, 7);
+
+	/* Notify COM when the driver post an application buffer. */
+	CNIC_WR(dev, BNX2_MQ_KNL_RX_V2P_MASK2, 0x2000);
+
+	/* Set the CP and COM doorbells.  These two processors polls the
+	 * doorbell for a non zero value before running.  This must be done
+	 * after setting up the kernel queue contexts. */
+	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 1);
+	cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 1);
+
+	cnic_init_bnx2_tx_ring(dev);
+	cnic_init_bnx2_rx_ring(dev);
+
+	err = cnic_init_bnx2_irq(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cnic_init_irq failed\n",
+		       dev->netdev->name);
+		cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+		cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+		return err;
+	}
+
+	return 0;
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int err;
+
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EALREADY;
+
+	err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: register_cnic failed\n",
+		       dev->netdev->name);
+		goto err2;
+	}
+
+	dev->regview = ethdev->io_base;
+	cp->chip_id = ethdev->chip_id;
+	pci_dev_get(dev->pcidev);
+	cp->func = PCI_FUNC(dev->pcidev->devfn);
+	cp->status_blk = ethdev->irq_arr[0].status_blk;
+	cp->status_blk_num = ethdev->irq_arr[0].status_blk_num;
+
+	err = cp->alloc_resc(dev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: allocate resource failure\n",
+		       dev->netdev->name);
+		goto err1;
+	}
+
+	err = cp->start_hw(dev);
+	if (err)
+		goto err1;
+
+	err = cnic_cm_open(dev);
+	if (err)
+		goto err1;
+
+	set_bit(CNIC_F_CNIC_UP, &dev->flags);
+
+	cp->enable_int(dev);
+
+	return 0;
+
+err1:
+	ethdev->drv_unregister_cnic(dev->netdev);
+	cp->free_resc(dev);
+	pci_dev_put(dev->pcidev);
+err2:
+	return err;
+}
+
+static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+
+	cnic_disable_bnx2_int_sync(dev);
+
+	cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+	cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+
+	cnic_init_context(dev, KWQ_CID);
+	cnic_init_context(dev, KCQ_CID);
+
+	cnic_setup_5709_context(dev, 0);
+	cnic_free_irq(dev);
+
+	ethdev->drv_unregister_cnic(dev->netdev);
+
+	cnic_free_resc(dev);
+}
+
+static void cnic_stop_hw(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		clear_bit(CNIC_F_CNIC_UP, &dev->flags);
+		rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], NULL);
+		synchronize_rcu();
+		cnic_cm_shutdown(dev);
+		cp->stop_hw(dev);
+		pci_dev_put(dev->pcidev);
+	}
+}
+
+static void cnic_free_dev(struct cnic_dev *dev)
+{
+	int i = 0;
+
+	while ((atomic_read(&dev->ref_count) != 0) && i < 10) {
+		msleep(100);
+		i++;
+	}
+	if (atomic_read(&dev->ref_count) != 0)
+		printk(KERN_ERR PFX "%s: Failed waiting for ref count to go"
+				    " to zero.\n", dev->netdev->name);
+
+	printk(KERN_INFO PFX "Removed CNIC device: %s\n", dev->netdev->name);
+	dev_put(dev->netdev);
+	kfree(dev);
+}
+
+static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
+				       struct pci_dev *pdev)
+{
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	int alloc_size;
+
+	alloc_size = sizeof(struct cnic_dev) + sizeof(struct cnic_local);
+
+	cdev = kzalloc(alloc_size , GFP_KERNEL);
+	if (cdev == NULL) {
+		printk(KERN_ERR PFX "%s: allocate dev struct failure\n",
+		       dev->name);
+		return NULL;
+	}
+
+	cdev->netdev = dev;
+	cdev->cnic_priv = (char *)cdev + sizeof(struct cnic_dev);
+	cdev->register_device = cnic_register_device;
+	cdev->unregister_device = cnic_unregister_device;
+	cdev->iscsi_nl_msg_recv = cnic_iscsi_nl_msg_recv;
+
+	cp = cdev->cnic_priv;
+	cp->dev = cdev;
+	cp->uio_dev = -1;
+	cp->l2_single_buf_size = 0x400;
+	cp->l2_rx_ring_size = 3;
+
+	spin_lock_init(&cp->cnic_ulp_lock);
+
+	printk(KERN_INFO PFX "Added CNIC device: %s\n", dev->name);
+
+	return cdev;
+}
+
+static struct cnic_dev *init_bnx2_cnic(struct net_device *dev)
+{
+	struct pci_dev *pdev;
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	struct cnic_eth_dev *ethdev = NULL;
+	struct cnic_eth_dev *(*probe)(void *) = NULL;
+
+	probe = __symbol_get("bnx2_cnic_probe");
+	if (probe) {
+		ethdev = (*probe)(dev);
+		symbol_put_addr(probe);
+	}
+	if (!ethdev)
+		return NULL;
+
+	pdev = ethdev->pdev;
+	if (!pdev)
+		return NULL;
+
+	dev_hold(dev);
+	pci_dev_get(pdev);
+	if (pdev->device == PCI_DEVICE_ID_NX2_5709 ||
+	    pdev->device == PCI_DEVICE_ID_NX2_5709S) {
+		u8 rev;
+
+		pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+		if (rev < 0x10) {
+			pci_dev_put(pdev);
+			goto cnic_err;
+		}
+	}
+	pci_dev_put(pdev);
+
+	cdev = cnic_alloc_dev(dev, pdev);
+	if (cdev == NULL)
+		goto cnic_err;
+
+	set_bit(CNIC_F_BNX2_CLASS, &cdev->flags);
+	cdev->submit_kwqes = cnic_submit_bnx2_kwqes;
+
+	cp = cdev->cnic_priv;
+	cp->ethdev = ethdev;
+	cdev->pcidev = pdev;
+
+	cp->cnic_ops = &cnic_bnx2_ops;
+	cp->start_hw = cnic_start_bnx2_hw;
+	cp->stop_hw = cnic_stop_bnx2_hw;
+	cp->setup_pgtbl = cnic_setup_page_tbl;
+	cp->alloc_resc = cnic_alloc_bnx2_resc;
+	cp->free_resc = cnic_free_resc;
+	cp->start_cm = cnic_cm_init_bnx2_hw;
+	cp->stop_cm = cnic_cm_stop_bnx2_hw;
+	cp->enable_int = cnic_enable_bnx2_int;
+	cp->disable_int_sync = cnic_disable_bnx2_int_sync;
+	cp->close_conn = cnic_close_bnx2_conn;
+	cp->next_idx = cnic_bnx2_next_idx;
+	cp->hw_idx = cnic_bnx2_hw_idx;
+	return cdev;
+
+cnic_err:
+	dev_put(dev);
+	return NULL;
+}
+
+static struct cnic_dev *is_cnic_dev(struct net_device *dev)
+{
+	struct ethtool_drvinfo drvinfo;
+	struct cnic_dev *cdev = NULL;
+
+	if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) {
+		memset(&drvinfo, 0, sizeof(drvinfo));
+		dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
+
+		if (!strcmp(drvinfo.driver, "bnx2"))
+			cdev = init_bnx2_cnic(dev);
+		if (cdev) {
+			write_lock(&cnic_dev_lock);
+			list_add(&cdev->list, &cnic_dev_list);
+			write_unlock(&cnic_dev_lock);
+		}
+	}
+	return cdev;
+}
+
+/**
+ * netdev event handler
+ */
+static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
+							 void *ptr)
+{
+	struct net_device *netdev = ptr;
+	struct cnic_dev *dev;
+	int if_type;
+	int new_dev = 0;
+
+	dev = cnic_from_netdev(netdev);
+
+	if (!dev && (event == NETDEV_REGISTER || event == NETDEV_UP)) {
+		/* Check for the hot-plug device */
+		dev = is_cnic_dev(netdev);
+		if (dev) {
+			new_dev = 1;
+			cnic_hold(dev);
+		}
+	}
+	if (dev) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (new_dev)
+			cnic_ulp_init(dev);
+		else if (event == NETDEV_UNREGISTER)
+			cnic_ulp_exit(dev);
+		else if (event == NETDEV_UP) {
+			mutex_lock(&cnic_lock);
+			if (!cnic_start_hw(dev))
+				cnic_ulp_start(dev);
+			mutex_unlock(&cnic_lock);
+		}
+
+		rcu_read_lock();
+		for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+			struct cnic_ulp_ops *ulp_ops;
+			void *ctx;
+
+			ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+			if (!ulp_ops || !ulp_ops->indicate_netevent)
+				continue;
+
+			ctx = cp->ulp_handle[if_type];
+
+			ulp_ops->indicate_netevent(ctx, event);
+		}
+		rcu_read_unlock();
+
+		if (event == NETDEV_GOING_DOWN) {
+			mutex_lock(&cnic_lock);
+			cnic_ulp_stop(dev);
+			cnic_stop_hw(dev);
+			mutex_unlock(&cnic_lock);
+		} else if (event == NETDEV_UNREGISTER) {
+			write_lock(&cnic_dev_lock);
+			list_del_init(&dev->list);
+			write_unlock(&cnic_dev_lock);
+
+			cnic_put(dev);
+			cnic_free_dev(dev);
+			goto done;
+		}
+		cnic_put(dev);
+	}
+done:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block cnic_netdev_notifier = {
+	.notifier_call = cnic_netdev_event
+};
+
+static void cnic_release(void)
+{
+	struct cnic_dev *dev;
+
+	while (!list_empty(&cnic_dev_list)) {
+		dev = list_entry(cnic_dev_list.next, struct cnic_dev, list);
+		if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+			cnic_ulp_stop(dev);
+			cnic_stop_hw(dev);
+		}
+
+		cnic_ulp_exit(dev);
+		list_del_init(&dev->list);
+		cnic_free_dev(dev);
+	}
+}
+
+static int __init cnic_init(void)
+{
+	int rc = 0;
+
+	printk(KERN_INFO "%s", version);
+
+	rc = register_netdevice_notifier(&cnic_netdev_notifier);
+	if (rc) {
+		cnic_release();
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit cnic_exit(void)
+{
+	unregister_netdevice_notifier(&cnic_netdev_notifier);
+	cnic_release();
+	return;
+}
+
+module_init(cnic_init);
+module_exit(cnic_exit);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
new file mode 100644
index 00000000000..5192d4a9df5
--- /dev/null
+++ b/drivers/net/cnic.h
@@ -0,0 +1,299 @@
+/* cnic.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_H
+#define CNIC_H
+
+#define KWQ_PAGE_CNT	4
+#define KCQ_PAGE_CNT	16
+
+#define KWQ_CID 		24
+#define KCQ_CID 		25
+
+/*
+ *	krnlq_context definition
+ */
+#define L5_KRNLQ_FLAGS	0x00000000
+#define L5_KRNLQ_SIZE	0x00000000
+#define L5_KRNLQ_TYPE	0x00000000
+#define KRNLQ_FLAGS_PG_SZ					(0xf<<0)
+#define KRNLQ_FLAGS_PG_SZ_256					(0<<0)
+#define KRNLQ_FLAGS_PG_SZ_512					(1<<0)
+#define KRNLQ_FLAGS_PG_SZ_1K					(2<<0)
+#define KRNLQ_FLAGS_PG_SZ_2K					(3<<0)
+#define KRNLQ_FLAGS_PG_SZ_4K					(4<<0)
+#define KRNLQ_FLAGS_PG_SZ_8K					(5<<0)
+#define KRNLQ_FLAGS_PG_SZ_16K					(6<<0)
+#define KRNLQ_FLAGS_PG_SZ_32K					(7<<0)
+#define KRNLQ_FLAGS_PG_SZ_64K					(8<<0)
+#define KRNLQ_FLAGS_PG_SZ_128K					(9<<0)
+#define KRNLQ_FLAGS_PG_SZ_256K					(10<<0)
+#define KRNLQ_FLAGS_PG_SZ_512K					(11<<0)
+#define KRNLQ_FLAGS_PG_SZ_1M					(12<<0)
+#define KRNLQ_FLAGS_PG_SZ_2M					(13<<0)
+#define KRNLQ_FLAGS_QE_SELF_SEQ					(1<<15)
+#define KRNLQ_SIZE_TYPE_SIZE	((((0x28 + 0x1f) & ~0x1f) / 0x20) << 16)
+#define KRNLQ_TYPE_TYPE						(0xf<<28)
+#define KRNLQ_TYPE_TYPE_EMPTY					(0<<28)
+#define KRNLQ_TYPE_TYPE_KRNLQ					(6<<28)
+
+#define L5_KRNLQ_HOST_QIDX		0x00000004
+#define L5_KRNLQ_HOST_FW_QIDX		0x00000008
+#define L5_KRNLQ_NX_QE_SELF_SEQ 	0x0000000c
+#define L5_KRNLQ_QE_SELF_SEQ_MAX	0x0000000c
+#define L5_KRNLQ_NX_QE_HADDR_HI 	0x00000010
+#define L5_KRNLQ_NX_QE_HADDR_LO 	0x00000014
+#define L5_KRNLQ_PGTBL_PGIDX		0x00000018
+#define L5_KRNLQ_NX_PG_QIDX 		0x00000018
+#define L5_KRNLQ_PGTBL_NPAGES		0x0000001c
+#define L5_KRNLQ_QIDX_INCR		0x0000001c
+#define L5_KRNLQ_PGTBL_HADDR_HI 	0x00000020
+#define L5_KRNLQ_PGTBL_HADDR_LO 	0x00000024
+
+#define BNX2_PG_CTX_MAP			0x1a0034
+#define BNX2_ISCSI_CTX_MAP		0x1a0074
+
+struct cnic_redirect_entry {
+	struct dst_entry *old_dst;
+	struct dst_entry *new_dst;
+};
+
+#define MAX_COMPLETED_KCQE	64
+
+#define MAX_CNIC_L5_CONTEXT	256
+
+#define MAX_CM_SK_TBL_SZ	MAX_CNIC_L5_CONTEXT
+
+#define MAX_ISCSI_TBL_SZ	256
+
+#define CNIC_LOCAL_PORT_MIN	60000
+#define CNIC_LOCAL_PORT_MAX	61000
+#define CNIC_LOCAL_PORT_RANGE	(CNIC_LOCAL_PORT_MAX - CNIC_LOCAL_PORT_MIN)
+
+#define KWQE_CNT (BCM_PAGE_SIZE / sizeof(struct kwqe))
+#define KCQE_CNT (BCM_PAGE_SIZE / sizeof(struct kcqe))
+#define MAX_KWQE_CNT (KWQE_CNT - 1)
+#define MAX_KCQE_CNT (KCQE_CNT - 1)
+
+#define MAX_KWQ_IDX	((KWQ_PAGE_CNT * KWQE_CNT) - 1)
+#define MAX_KCQ_IDX	((KCQ_PAGE_CNT * KCQE_CNT) - 1)
+
+#define KWQ_PG(x) (((x) & ~MAX_KWQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KWQ_IDX(x) ((x) & MAX_KWQE_CNT)
+
+#define KCQ_PG(x) (((x) & ~MAX_KCQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KCQ_IDX(x) ((x) & MAX_KCQE_CNT)
+
+#define BNX2X_NEXT_KCQE(x) (((x) & (MAX_KCQE_CNT - 1)) ==		\
+		(MAX_KCQE_CNT - 1)) ?					\
+		(x) + 2 : (x) + 1
+
+#define BNX2X_KWQ_DATA_PG(cp, x) ((x) / (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA_IDX(cp, x) ((x) % (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA(cp, x)						\
+	&(cp)->kwq_16_data[BNX2X_KWQ_DATA_PG(cp, x)][BNX2X_KWQ_DATA_IDX(cp, x)]
+
+#define DEF_IPID_COUNT		0xc001
+
+#define DEF_KA_TIMEOUT		10000
+#define DEF_KA_INTERVAL		300000
+#define DEF_KA_MAX_PROBE_COUNT	3
+#define DEF_TOS			0
+#define DEF_TTL			0xfe
+#define DEF_SND_SEQ_SCALE	0
+#define DEF_RCV_BUF		0xffff
+#define DEF_SND_BUF		0xffff
+#define DEF_SEED		0
+#define DEF_MAX_RT_TIME		500
+#define DEF_MAX_DA_COUNT	2
+#define DEF_SWS_TIMER		1000
+#define DEF_MAX_CWND		0xffff
+
+struct cnic_ctx {
+	u32		cid;
+	void		*ctx;
+	dma_addr_t	mapping;
+};
+
+#define BNX2_MAX_CID		0x2000
+
+struct cnic_dma {
+	int		num_pages;
+	void		**pg_arr;
+	dma_addr_t	*pg_map_arr;
+	int		pgtbl_size;
+	u32		*pgtbl;
+	dma_addr_t	pgtbl_map;
+};
+
+struct cnic_id_tbl {
+	spinlock_t	lock;
+	u32		start;
+	u32		max;
+	u32		next;
+	unsigned long	*table;
+};
+
+#define CNIC_KWQ16_DATA_SIZE	128
+
+struct kwqe_16_data {
+	u8	data[CNIC_KWQ16_DATA_SIZE];
+};
+
+struct cnic_iscsi {
+	struct cnic_dma		task_array_info;
+	struct cnic_dma		r2tq_info;
+	struct cnic_dma		hq_info;
+};
+
+struct cnic_context {
+	u32			cid;
+	struct kwqe_16_data	*kwqe_data;
+	dma_addr_t		kwqe_data_mapping;
+	wait_queue_head_t	waitq;
+	int			wait_cond;
+	unsigned long		timestamp;
+	u32			ctx_flags;
+#define	CTX_FL_OFFLD_START	0x00000001
+	u8			ulp_proto_id;
+	union {
+		struct cnic_iscsi	*iscsi;
+	} proto;
+};
+
+struct cnic_local {
+
+	spinlock_t cnic_ulp_lock;
+	void *ulp_handle[MAX_CNIC_ULP_TYPE];
+	unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
+#define ULP_F_INIT	0
+#define ULP_F_START	1
+	struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
+
+	/* protected by ulp_lock */
+	u32 cnic_local_flags;
+#define	CNIC_LCL_FL_KWQ_INIT	0x00000001
+
+	struct cnic_dev *dev;
+
+	struct cnic_eth_dev *ethdev;
+
+	void		*l2_ring;
+	dma_addr_t	l2_ring_map;
+	int		l2_ring_size;
+	int		l2_rx_ring_size;
+
+	void		*l2_buf;
+	dma_addr_t	l2_buf_map;
+	int		l2_buf_size;
+	int		l2_single_buf_size;
+
+	u16		*rx_cons_ptr;
+	u16		*tx_cons_ptr;
+	u16		rx_cons;
+	u16		tx_cons;
+
+	u32 kwq_cid_addr;
+	u32 kcq_cid_addr;
+
+	struct cnic_dma		kwq_info;
+	struct kwqe		**kwq;
+
+	struct cnic_dma		kwq_16_data_info;
+
+	u16		max_kwq_idx;
+
+	u16		kwq_prod_idx;
+	u32		kwq_io_addr;
+
+	u16		*kwq_con_idx_ptr;
+	u16		kwq_con_idx;
+
+	struct cnic_dma	kcq_info;
+	struct kcqe	**kcq;
+
+	u16		kcq_prod_idx;
+	u32		kcq_io_addr;
+
+	void				*status_blk;
+	struct status_block_msix	*bnx2_status_blk;
+	struct host_status_block	*bnx2x_status_blk;
+
+	u32				status_blk_num;
+	u32				int_num;
+	u32				last_status_idx;
+	struct tasklet_struct		cnic_irq_task;
+
+	struct kcqe		*completed_kcq[MAX_COMPLETED_KCQE];
+
+	struct cnic_sock	*csk_tbl;
+	struct cnic_id_tbl	csk_port_tbl;
+
+	struct cnic_dma		conn_buf_info;
+	struct cnic_dma		gbl_buf_info;
+
+	struct cnic_iscsi	*iscsi_tbl;
+	struct cnic_context	*ctx_tbl;
+	struct cnic_id_tbl	cid_tbl;
+	int			max_iscsi_conn;
+	atomic_t		iscsi_conn;
+
+	/* per connection parameters */
+	int			num_iscsi_tasks;
+	int			num_ccells;
+	int			task_array_size;
+	int			r2tq_size;
+	int			hq_size;
+	int			num_cqs;
+
+	struct cnic_ctx		*ctx_arr;
+	int			ctx_blks;
+	int			ctx_blk_size;
+	int			cids_per_blk;
+
+	u32			chip_id;
+	int			func;
+	u32			shmem_base;
+
+	u32			uio_dev;
+	struct uio_info		*cnic_uinfo;
+
+	struct cnic_ops		*cnic_ops;
+	int			(*start_hw)(struct cnic_dev *);
+	void			(*stop_hw)(struct cnic_dev *);
+	void			(*setup_pgtbl)(struct cnic_dev *,
+					       struct cnic_dma *);
+	int			(*alloc_resc)(struct cnic_dev *);
+	void			(*free_resc)(struct cnic_dev *);
+	int			(*start_cm)(struct cnic_dev *);
+	void			(*stop_cm)(struct cnic_dev *);
+	void			(*enable_int)(struct cnic_dev *);
+	void			(*disable_int_sync)(struct cnic_dev *);
+	void			(*ack_int)(struct cnic_dev *);
+	void			(*close_conn)(struct cnic_sock *, u32 opcode);
+	u16			(*next_idx)(u16);
+	u16			(*hw_idx)(u16);
+};
+
+struct bnx2x_bd_chain_next {
+	u32	addr_lo;
+	u32	addr_hi;
+	u8	reserved[8];
+};
+
+#define ISCSI_RAMROD_CMD_ID_UPDATE_CONN		(ISCSI_KCQE_OPCODE_UPDATE_CONN)
+#define ISCSI_RAMROD_CMD_ID_INIT		(ISCSI_KCQE_OPCODE_INIT)
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+#endif
+
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
new file mode 100644
index 00000000000..cee80f69445
--- /dev/null
+++ b/drivers/net/cnic_defs.h
@@ -0,0 +1,580 @@
+
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#ifndef CNIC_DEFS_H
+#define CNIC_DEFS_H
+
+/* KWQ (kernel work queue) request op codes */
+#define L2_KWQE_OPCODE_VALUE_FLUSH                  (4)
+
+#define L4_KWQE_OPCODE_VALUE_CONNECT1               (50)
+#define L4_KWQE_OPCODE_VALUE_CONNECT2               (51)
+#define L4_KWQE_OPCODE_VALUE_CONNECT3               (52)
+#define L4_KWQE_OPCODE_VALUE_RESET                  (53)
+#define L4_KWQE_OPCODE_VALUE_CLOSE                  (54)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_SECRET          (60)
+#define L4_KWQE_OPCODE_VALUE_INIT_ULP               (61)
+
+#define L4_KWQE_OPCODE_VALUE_OFFLOAD_PG             (1)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_PG              (9)
+#define L4_KWQE_OPCODE_VALUE_UPLOAD_PG              (14)
+
+#define L5CM_RAMROD_CMD_ID_BASE			(0x80)
+#define L5CM_RAMROD_CMD_ID_TCP_CONNECT		(L5CM_RAMROD_CMD_ID_BASE + 3)
+#define L5CM_RAMROD_CMD_ID_CLOSE		(L5CM_RAMROD_CMD_ID_BASE + 12)
+#define L5CM_RAMROD_CMD_ID_ABORT		(L5CM_RAMROD_CMD_ID_BASE + 13)
+#define L5CM_RAMROD_CMD_ID_SEARCHER_DELETE	(L5CM_RAMROD_CMD_ID_BASE + 14)
+#define L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD	(L5CM_RAMROD_CMD_ID_BASE + 15)
+
+/* KCQ (kernel completion queue) response op codes */
+#define L4_KCQE_OPCODE_VALUE_CLOSE_COMP             (53)
+#define L4_KCQE_OPCODE_VALUE_RESET_COMP             (54)
+#define L4_KCQE_OPCODE_VALUE_FW_TCP_UPDATE          (55)
+#define L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE       (56)
+#define L4_KCQE_OPCODE_VALUE_RESET_RECEIVED         (57)
+#define L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED         (58)
+#define L4_KCQE_OPCODE_VALUE_INIT_ULP               (61)
+
+#define L4_KCQE_OPCODE_VALUE_OFFLOAD_PG             (1)
+#define L4_KCQE_OPCODE_VALUE_UPDATE_PG              (9)
+#define L4_KCQE_OPCODE_VALUE_UPLOAD_PG              (14)
+
+/* KCQ (kernel completion queue) completion status */
+#define L4_KCQE_COMPLETION_STATUS_SUCCESS		    (0)
+#define L4_KCQE_COMPLETION_STATUS_TIMEOUT        (0x93)
+
+#define L4_LAYER_CODE (4)
+#define L2_LAYER_CODE (2)
+
+/*
+ * L4 KCQ CQE
+ */
+struct l4_kcq {
+	u32 cid;
+	u32 pg_cid;
+	u32 conn_id;
+	u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+	u16 status;
+	u16 reserved1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved1;
+	u16 status;
+#endif
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KCQ_RESERVED3 (0x7<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define L4_KCQ_RESERVED3 (0xF<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * L4 KCQ CQE PG upload
+ */
+struct l4_kcq_upload_pg {
+	u32 pg_cid;
+#if defined(__BIG_ENDIAN)
+	u16 pg_status;
+	u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pg_ipid_count;
+	u16 pg_status;
+#endif
+	u32 reserved1[5];
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * Gracefully close the connection request
+ */
+struct l4_kwq_close_req {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+
+/*
+ * The first request to be passed in order to establish connection in option2
+ */
+struct l4_kwq_connect_req1 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u8 reserved0;
+	u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+	u8 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 pg_cid;
+	u32 src_ip;
+	u32 dst_ip;
+#if defined(__BIG_ENDIAN)
+	u16 dst_port;
+	u16 src_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 src_port;
+	u16 dst_port;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 rsrv1[3];
+	u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+	u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+	u8 rsrv1[3];
+#endif
+	u32 rsrv2;
+};
+
+
+/*
+ * The second ( optional )request to be passed in order to establish
+ * connection in option2 - for IPv6 only
+ */
+struct l4_kwq_connect_req2 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u8 reserved0;
+	u8 rsrv;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rsrv;
+	u8 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 reserved2;
+	u32 src_ip_v6_2;
+	u32 src_ip_v6_3;
+	u32 src_ip_v6_4;
+	u32 dst_ip_v6_2;
+	u32 dst_ip_v6_3;
+	u32 dst_ip_v6_4;
+};
+
+
+/*
+ * The third ( and last )request to be passed in order to establish
+ * connection in option2
+ */
+struct l4_kwq_connect_req3 {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 ka_timeout;
+	u32 ka_interval ;
+#if defined(__BIG_ENDIAN)
+	u8 snd_seq_scale;
+	u8 ttl;
+	u8 tos;
+	u8 ka_max_probe_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_max_probe_count;
+	u8 tos;
+	u8 ttl;
+	u8 snd_seq_scale;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 pmtu;
+	u16 mss;
+#elif defined(__LITTLE_ENDIAN)
+	u16 mss;
+	u16 pmtu;
+#endif
+	u32 rcv_buf;
+	u32 snd_buf;
+	u32 seed;
+};
+
+
+/*
+ * a KWQE request to offload a PG connection
+ */
+struct l4_kwq_offload_pg {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 l2hdr_nbytes;
+	u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+	u8 da0;
+	u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da1;
+	u8 da0;
+	u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+	u8 l2hdr_nbytes;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 da2;
+	u8 da3;
+	u8 da4;
+	u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da5;
+	u8 da4;
+	u8 da3;
+	u8 da2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sa0;
+	u8 sa1;
+	u8 sa2;
+	u8 sa3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 sa3;
+	u8 sa2;
+	u8 sa1;
+	u8 sa0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sa4;
+	u8 sa5;
+	u16 etype;
+#elif defined(__LITTLE_ENDIAN)
+	u16 etype;
+	u8 sa5;
+	u8 sa4;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 vlan_tag;
+	u16 ipid_start;
+#elif defined(__LITTLE_ENDIAN)
+	u16 ipid_start;
+	u16 vlan_tag;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ipid_count;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 ipid_count;
+#endif
+	u32 host_opaque;
+};
+
+
+/*
+ * Abortively close the connection request
+ */
+struct l4_kwq_reset_req {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_code;
+	u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+
+/*
+ * a KWQE request to update a PG connection
+ */
+struct l4_kwq_update_pg {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+	u8 opcode;
+	u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+	u16 oper16;
+	u8 opcode;
+	u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 pg_cid;
+	u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+	u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+	u8 pg_unused_a;
+	u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pg_ipid_count;
+	u8 pg_unused_a;
+	u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserverd3;
+	u8 da0;
+	u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da1;
+	u8 da0;
+	u16 reserverd3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 da2;
+	u8 da3;
+	u8 da4;
+	u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 da5;
+	u8 da4;
+	u8 da3;
+	u8 da2;
+#endif
+	u32 reserved4;
+	u32 reserved5;
+};
+
+
+/*
+ * a KWQE request to upload a PG or L4 context
+ */
+struct l4_kwq_upload {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+	u8 opcode;
+	u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+	u16 oper16;
+	u8 opcode;
+	u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+#endif
+	u32 cid;
+	u32 reserved2[6];
+};
+
+#endif /* CNIC_DEFS_H */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
new file mode 100644
index 00000000000..06380963a34
--- /dev/null
+++ b/drivers/net/cnic_if.h
@@ -0,0 +1,299 @@
+/* cnic_if.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_IF_H
+#define CNIC_IF_H
+
+#define CNIC_MODULE_VERSION	"2.0.0"
+#define CNIC_MODULE_RELDATE	"May 21, 2009"
+
+#define CNIC_ULP_RDMA		0
+#define CNIC_ULP_ISCSI		1
+#define CNIC_ULP_L4		2
+#define MAX_CNIC_ULP_TYPE_EXT	2
+#define MAX_CNIC_ULP_TYPE	3
+
+struct kwqe {
+	u32 kwqe_op_flag;
+
+#define KWQE_OPCODE_MASK	0x00ff0000
+#define KWQE_OPCODE_SHIFT	16
+#define KWQE_FLAGS_LAYER_SHIFT	28
+#define KWQE_OPCODE(x)		((x & KWQE_OPCODE_MASK) >> KWQE_OPCODE_SHIFT)
+
+	u32 kwqe_info0;
+	u32 kwqe_info1;
+	u32 kwqe_info2;
+	u32 kwqe_info3;
+	u32 kwqe_info4;
+	u32 kwqe_info5;
+	u32 kwqe_info6;
+};
+
+struct kwqe_16 {
+	u32 kwqe_info0;
+	u32 kwqe_info1;
+	u32 kwqe_info2;
+	u32 kwqe_info3;
+};
+
+struct kcqe {
+	u32 kcqe_info0;
+	u32 kcqe_info1;
+	u32 kcqe_info2;
+	u32 kcqe_info3;
+	u32 kcqe_info4;
+	u32 kcqe_info5;
+	u32 kcqe_info6;
+	u32 kcqe_op_flag;
+		#define KCQE_RAMROD_COMPLETION		(0x1<<27) /* Everest */
+		#define KCQE_FLAGS_LAYER_MASK		(0x7<<28)
+		#define KCQE_FLAGS_LAYER_MASK_MISC	(0<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L2	(2<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L3	(3<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L4	(4<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_RDMA	(5<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_ISCSI	(6<<28)
+		#define KCQE_FLAGS_NEXT 		(1<<31)
+		#define KCQE_FLAGS_OPCODE_MASK		(0xff<<16)
+		#define KCQE_FLAGS_OPCODE_SHIFT		(16)
+		#define KCQE_OPCODE(op)			\
+		(((op) & KCQE_FLAGS_OPCODE_MASK) >> KCQE_FLAGS_OPCODE_SHIFT)
+};
+
+#define MAX_CNIC_CTL_DATA	64
+#define MAX_DRV_CTL_DATA	64
+
+#define CNIC_CTL_STOP_CMD		1
+#define CNIC_CTL_START_CMD		2
+#define CNIC_CTL_COMPLETION_CMD		3
+
+#define DRV_CTL_IO_WR_CMD		0x101
+#define DRV_CTL_IO_RD_CMD		0x102
+#define DRV_CTL_CTX_WR_CMD		0x103
+#define DRV_CTL_CTXTBL_WR_CMD		0x104
+#define DRV_CTL_COMPLETION_CMD		0x105
+
+struct cnic_ctl_completion {
+	u32	cid;
+};
+
+struct drv_ctl_completion {
+	u32	comp_count;
+};
+
+struct cnic_ctl_info {
+	int	cmd;
+	union {
+		struct cnic_ctl_completion comp;
+		char bytes[MAX_CNIC_CTL_DATA];
+	} data;
+};
+
+struct drv_ctl_io {
+	u32		cid_addr;
+	u32		offset;
+	u32		data;
+	dma_addr_t	dma_addr;
+};
+
+struct drv_ctl_info {
+	int	cmd;
+	union {
+		struct drv_ctl_completion comp;
+		struct drv_ctl_io io;
+		char bytes[MAX_DRV_CTL_DATA];
+	} data;
+};
+
+struct cnic_ops {
+	struct module	*cnic_owner;
+	/* Calls to these functions are protected by RCU.  When
+	 * unregistering, we wait for any calls to complete before
+	 * continuing.
+	 */
+	int		(*cnic_handler)(void *, void *);
+	int		(*cnic_ctl)(void *, struct cnic_ctl_info *);
+};
+
+#define MAX_CNIC_VEC	8
+
+struct cnic_irq {
+	unsigned int	vector;
+	void		*status_blk;
+	u32		status_blk_num;
+	u32		irq_flags;
+#define CNIC_IRQ_FL_MSIX		0x00000001
+};
+
+struct cnic_eth_dev {
+	struct module	*drv_owner;
+	u32		drv_state;
+#define CNIC_DRV_STATE_REGD		0x00000001
+#define CNIC_DRV_STATE_USING_MSIX	0x00000002
+	u32		chip_id;
+	u32		max_kwqe_pending;
+	struct pci_dev	*pdev;
+	void __iomem	*io_base;
+
+	u32		ctx_tbl_offset;
+	u32		ctx_tbl_len;
+	int		ctx_blk_size;
+	u32		starting_cid;
+	u32		max_iscsi_conn;
+	u32		max_fcoe_conn;
+	u32		max_rdma_conn;
+	u32		reserved0[2];
+
+	int		num_irq;
+	struct cnic_irq	irq_arr[MAX_CNIC_VEC];
+	int		(*drv_register_cnic)(struct net_device *,
+					     struct cnic_ops *, void *);
+	int		(*drv_unregister_cnic)(struct net_device *);
+	int		(*drv_submit_kwqes_32)(struct net_device *,
+					       struct kwqe *[], u32);
+	int		(*drv_submit_kwqes_16)(struct net_device *,
+					       struct kwqe_16 *[], u32);
+	int		(*drv_ctl)(struct net_device *, struct drv_ctl_info *);
+	unsigned long	reserved1[2];
+};
+
+struct cnic_sockaddr {
+	union {
+		struct sockaddr_in	v4;
+		struct sockaddr_in6	v6;
+	} local;
+	union {
+		struct sockaddr_in	v4;
+		struct sockaddr_in6	v6;
+	} remote;
+};
+
+struct cnic_sock {
+	struct cnic_dev *dev;
+	void	*context;
+	u32	src_ip[4];
+	u32	dst_ip[4];
+	u16	src_port;
+	u16	dst_port;
+	u16	vlan_id;
+	unsigned char old_ha[6];
+	unsigned char ha[6];
+	u32	mtu;
+	u32	cid;
+	u32	l5_cid;
+	u32	pg_cid;
+	int	ulp_type;
+
+	u32	ka_timeout;
+	u32	ka_interval;
+	u8	ka_max_probe_count;
+	u8	tos;
+	u8	ttl;
+	u8	snd_seq_scale;
+	u32	rcv_buf;
+	u32	snd_buf;
+	u32	seed;
+
+	unsigned long	tcp_flags;
+#define SK_TCP_NO_DELAY_ACK	0x1
+#define SK_TCP_KEEP_ALIVE	0x2
+#define SK_TCP_NAGLE		0x4
+#define SK_TCP_TIMESTAMP	0x8
+#define SK_TCP_SACK		0x10
+#define SK_TCP_SEG_SCALING	0x20
+	unsigned long	flags;
+#define SK_F_INUSE		0
+#define SK_F_OFFLD_COMPLETE	1
+#define SK_F_OFFLD_SCHED	2
+#define SK_F_PG_OFFLD_COMPLETE	3
+#define SK_F_CONNECT_START	4
+#define SK_F_IPV6		5
+#define SK_F_CLOSING		7
+
+	atomic_t ref_count;
+	u32 state;
+	struct kwqe kwqe1;
+	struct kwqe kwqe2;
+	struct kwqe kwqe3;
+};
+
+struct cnic_dev {
+	struct net_device	*netdev;
+	struct pci_dev		*pcidev;
+	void __iomem		*regview;
+	struct list_head	list;
+
+	int (*register_device)(struct cnic_dev *dev, int ulp_type,
+			       void *ulp_ctx);
+	int (*unregister_device)(struct cnic_dev *dev, int ulp_type);
+	int (*submit_kwqes)(struct cnic_dev *dev, struct kwqe *wqes[],
+				u32 num_wqes);
+	int (*submit_kwqes_16)(struct cnic_dev *dev, struct kwqe_16 *wqes[],
+				u32 num_wqes);
+
+	int (*cm_create)(struct cnic_dev *, int, u32, u32, struct cnic_sock **,
+			 void *);
+	int (*cm_destroy)(struct cnic_sock *);
+	int (*cm_connect)(struct cnic_sock *, struct cnic_sockaddr *);
+	int (*cm_abort)(struct cnic_sock *);
+	int (*cm_close)(struct cnic_sock *);
+	struct cnic_dev *(*cm_select_dev)(struct sockaddr_in *, int ulp_type);
+	int (*iscsi_nl_msg_recv)(struct cnic_dev *dev, u32 msg_type,
+				 char *data, u16 data_size);
+	unsigned long	flags;
+#define CNIC_F_CNIC_UP		1
+#define CNIC_F_BNX2_CLASS	3
+#define CNIC_F_BNX2X_CLASS	4
+	atomic_t	ref_count;
+	u8		mac_addr[6];
+
+	int		max_iscsi_conn;
+	int		max_fcoe_conn;
+	int		max_rdma_conn;
+
+	void		*cnic_priv;
+};
+
+#define CNIC_WR(dev, off, val)		writel(val, dev->regview + off)
+#define CNIC_WR16(dev, off, val)	writew(val, dev->regview + off)
+#define CNIC_WR8(dev, off, val)		writeb(val, dev->regview + off)
+#define CNIC_RD(dev, off)		readl(dev->regview + off)
+#define CNIC_RD16(dev, off)		readw(dev->regview + off)
+
+struct cnic_ulp_ops {
+	/* Calls to these functions are protected by RCU.  When
+	 * unregistering, we wait for any calls to complete before
+	 * continuing.
+	 */
+
+	void (*cnic_init)(struct cnic_dev *dev);
+	void (*cnic_exit)(struct cnic_dev *dev);
+	void (*cnic_start)(void *ulp_ctx);
+	void (*cnic_stop)(void *ulp_ctx);
+	void (*indicate_kcqes)(void *ulp_ctx, struct kcqe *cqes[],
+				u32 num_cqes);
+	void (*indicate_netevent)(void *ulp_ctx, unsigned long event);
+	void (*cm_connect_complete)(struct cnic_sock *);
+	void (*cm_close_complete)(struct cnic_sock *);
+	void (*cm_abort_complete)(struct cnic_sock *);
+	void (*cm_remote_close)(struct cnic_sock *);
+	void (*cm_remote_abort)(struct cnic_sock *);
+	void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
+				  char *data, u16 data_size);
+	struct module *owner;
+};
+
+extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
+
+extern int cnic_unregister_driver(int ulp_type);
+
+#endif
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 714df2b675e..c888e97c967 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -85,8 +85,8 @@ struct fl_pg_chunk {
 	struct page *page;
 	void *va;
 	unsigned int offset;
-	u64 *p_cnt;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	unsigned long *p_cnt;
+	dma_addr_t mapping;
 };
 
 struct rx_desc;
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 7ea48414c6c..17858b9a583 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -2496,14 +2496,16 @@ static void check_link_status(struct adapter *adapter)
 	for_each_port(adapter, i) {
 		struct net_device *dev = adapter->port[i];
 		struct port_info *p = netdev_priv(dev);
+		int link_fault;
 
 		spin_lock_irq(&adapter->work_lock);
-		if (p->link_fault) {
+		link_fault = p->link_fault;
+		spin_unlock_irq(&adapter->work_lock);
+
+		if (link_fault) {
 			t3_link_fault(adapter, i);
-			spin_unlock_irq(&adapter->work_lock);
 			continue;
 		}
-		spin_unlock_irq(&adapter->work_lock);
 
 		if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) {
 			t3_xgm_intr_disable(adapter, i);
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 26d3587f339..b3ee2bc1a00 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -355,7 +355,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q,
 		(*d->pg_chunk.p_cnt)--;
 		if (!*d->pg_chunk.p_cnt)
 			pci_unmap_page(pdev,
-				       pci_unmap_addr(&d->pg_chunk, mapping),
+				       d->pg_chunk.mapping,
 				       q->alloc_size, PCI_DMA_FROMDEVICE);
 
 		put_page(d->pg_chunk.page);
@@ -454,7 +454,7 @@ static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q,
 		q->pg_chunk.offset = 0;
 		mapping = pci_map_page(adapter->pdev, q->pg_chunk.page,
 				       0, q->alloc_size, PCI_DMA_FROMDEVICE);
-		pci_unmap_addr_set(&q->pg_chunk, mapping, mapping);
+		q->pg_chunk.mapping = mapping;
 	}
 	sd->pg_chunk = q->pg_chunk;
 
@@ -511,8 +511,7 @@ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
 nomem:				q->alloc_failed++;
 				break;
 			}
-			mapping = pci_unmap_addr(&sd->pg_chunk, mapping) +
-						 sd->pg_chunk.offset;
+			mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset;
 			pci_unmap_addr_set(sd, dma_addr, mapping);
 
 			add_one_rx_chunk(mapping, d, q->gen);
@@ -881,7 +880,7 @@ recycle:
 	(*sd->pg_chunk.p_cnt)--;
 	if (!*sd->pg_chunk.p_cnt)
 		pci_unmap_page(adap->pdev,
-			       pci_unmap_addr(&sd->pg_chunk, mapping),
+			       sd->pg_chunk.mapping,
 			       fl->alloc_size,
 			       PCI_DMA_FROMDEVICE);
 	if (!skb) {
@@ -2096,7 +2095,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 	(*sd->pg_chunk.p_cnt)--;
 	if (!*sd->pg_chunk.p_cnt)
 		pci_unmap_page(adap->pdev,
-			       pci_unmap_addr(&sd->pg_chunk, mapping),
+			       sd->pg_chunk.mapping,
 			       fl->alloc_size,
 			       PCI_DMA_FROMDEVICE);
 
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 4f68aeb2679..4950d5d789a 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1274,6 +1274,11 @@ void t3_link_fault(struct adapter *adapter, int port_id)
 				 A_XGM_INT_STATUS + mac->offset);
 	link_fault &= F_LINKFAULTCHANGE;
 
+	link_ok = lc->link_ok;
+	speed = lc->speed;
+	duplex = lc->duplex;
+	fc = lc->fc;
+
 	phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
 
 	if (link_fault) {
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 0f9ee134855..af5364f4955 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2785,7 +2785,7 @@ static int e100_resume(struct pci_dev *pdev)
 	/* ack any pending wake events, disable PME */
 	pci_enable_wake(pdev, 0, 0);
 
-	/* disbale reverse auto-negotiation */
+	/* disable reverse auto-negotiation */
 	if (nic->phy == phy_82552_v) {
 		u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
 		                           E100_82552_SMARTSPEED);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b1419e21b46..fffb006b7d9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4027,8 +4027,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		                 PCI_DMA_FROMDEVICE);
 
 		length = le16_to_cpu(rx_desc->length);
-
-		if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+		/* !EOP means multiple descriptors were used to store a single
+		 * packet, also make sure the frame isn't just CRC only */
+		if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
 			/* All receives must fit into a single buffer */
 			E1000_DBG("%s: Receive packet consumed multiple"
 				  " buffers\n", netdev->name);
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f37360aa12a..44f0bf23daf 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,7 +62,7 @@ struct e1000_info;
 	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define E1000E_INT_MODE_LEGACY		0
 #define E1000E_INT_MODE_MSI		1
 #define E1000E_INT_MODE_MSIX		2
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 16a41389575..78952f8324e 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
 };
 
 /*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
  */
 struct ehea_eq_attr {
 	u32 type;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index f9a846b1b92..9f6a68fb7b4 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -897,6 +897,12 @@ enum {
 };
 static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
 
+/*
+ * Power down phy when interface is down (persists through reboot;
+ * older Linux and other OSes may not power it up again)
+ */
+static int phy_power_down = 0;
+
 static inline struct fe_priv *get_nvpriv(struct net_device *dev)
 {
 	return netdev_priv(dev);
@@ -1485,7 +1491,10 @@ static int phy_init(struct net_device *dev)
 
 	/* restart auto negotiation, power down phy */
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
-	mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN);
+	mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+	if (phy_power_down) {
+		mii_control |= BMCR_PDOWN;
+	}
 	if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
 		return PHY_ERROR;
 	}
@@ -5513,7 +5522,7 @@ static int nv_close(struct net_device *dev)
 
 	nv_drain_rxtx(dev);
 
-	if (np->wolenabled) {
+	if (np->wolenabled || !phy_power_down) {
 		writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
 		nv_start_rx(dev);
 	} else {
@@ -6367,6 +6376,8 @@ module_param(dma_64bit, int, 0);
 MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
 module_param(phy_cross, int, 0);
 MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_power_down, int, 0);
+MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0).");
 
 MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
 MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b2c49679bba..a0519184e54 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1885,8 +1885,17 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 
 			if (unlikely(!newskb))
 				newskb = skb;
-			else if (skb)
+			else if (skb) {
+				/*
+				 * We need to reset ->data to what it
+				 * was before gfar_new_skb() re-aligned
+				 * it to an RXBUF_ALIGNMENT boundary
+				 * before we put the skb back on the
+				 * recycle list.
+				 */
+				skb->data = skb->head + NET_SKB_PAD;
 				__skb_queue_head(&priv->rx_recycle, skb);
+			}
 		} else {
 			/* Increment the number of packets */
 			dev->stats.rx_packets++;
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 0642d52aef5..cf352961ae9 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -259,7 +259,7 @@ extern const char gfar_driver_version[];
 (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
  IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
  | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \
- | IEVENT_MAG)
+ | IEVENT_MAG | IEVENT_BABR)
 
 #define IMASK_INIT_CLEAR	0x00000000
 #define IMASK_BABR              0x80000000
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 4bff35e4687..d488733893a 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -45,7 +45,7 @@ struct igbvf_adapter;
 /* Interrupt defines */
 #define IGBVF_START_ITR                 648 /* ~6000 ints/sec */
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define IGBVF_INT_MODE_LEGACY           0
 #define IGBVF_INT_MODE_MSI              1
 #define IGBVF_INT_MODE_MSIX             2
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index dd9318f1949..dfc2541bb55 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -514,7 +514,7 @@ enum ipg_regs {
 #define		IPG_DMALIST_ALIGN_PAD	0x07
 #define		IPG_MULTICAST_HASHTABLE_SIZE	0x40
 
-/* Number of miliseconds to wait after issuing a software reset.
+/* Number of milliseconds to wait after issuing a software reset.
  * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
  */
 #define         IPG_AC_RESETWAIT             0x05
diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 8e884869a05..22e74a0e036 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -304,7 +304,7 @@ struct net_device * __init mac8390_probe(int unit)
 	if (!MACH_IS_MAC)
 		return ERR_PTR(-ENODEV);
 
-	dev = alloc_ei_netdev();
+	dev = ____alloc_ei_netdev(0);
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
@@ -481,15 +481,15 @@ void cleanup_module(void)
 static const struct net_device_ops mac8390_netdev_ops = {
 	.ndo_open 		= mac8390_open,
 	.ndo_stop		= mac8390_close,
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_start_xmit		= __ei_start_xmit,
+	.ndo_tx_timeout		= __ei_tx_timeout,
+	.ndo_get_stats		= __ei_get_stats,
+	.ndo_set_multicast_list = __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ei_poll,
+	.ndo_poll_controller	= __ei_poll,
 #endif
 };
 
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index aa08987f6e8..dbd3436912b 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg)
 static int mdio_probe(struct meth_private *priv)
 {
 	int i;
-	unsigned long p2, p3;
+	unsigned long p2, p3, flags;
 	/* check if phy is detected already */
 	if(priv->phy_addr>=0&&priv->phy_addr<32)
 		return 0;
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 	for (i=0;i<32;++i){
 		priv->phy_addr=i;
 		p2=mdio_read(priv,2);
@@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv)
 			break;
 		}
 	}
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 	if(priv->phy_addr<32) {
 		return 0;
 	}
@@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev)
 static void meth_rx(struct net_device* dev, unsigned long int_status)
 {
 	struct sk_buff *skb;
-	unsigned long status;
+	unsigned long status, flags;
 	struct meth_private *priv = netdev_priv(dev);
 	unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
 
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 	priv->dma_ctrl &= ~METH_DMA_RX_INT_EN;
 	mace->eth.dma_ctrl = priv->dma_ctrl;
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 
 	if (int_status & METH_INT_RX_UNDERFLOW) {
 		fifo_rptr = (fifo_rptr - 1) & 0x0f;
@@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status)
 		mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write];
 		ADVANCE_RX_PTR(priv->rx_write);
 	}
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 	/* In case there was underflow, and Rx DMA was disabled */
 	priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN;
 	mace->eth.dma_ctrl = priv->dma_ctrl;
 	mace->eth.int_stat = METH_INT_RX_THRESHOLD;
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 }
 
 static int meth_tx_full(struct net_device *dev)
@@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev)
 static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
 {
 	struct meth_private *priv = netdev_priv(dev);
-	unsigned long status;
+	unsigned long status, flags;
 	struct sk_buff *skb;
 	unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
 
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 
 	/* Stop DMA notification */
 	priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
@@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
 	}
 
 	mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT;
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 }
 
 static void meth_error(struct net_device* dev, unsigned status)
 {
 	struct meth_private *priv = netdev_priv(dev);
+	unsigned long flags;
 
 	printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
 	/* check for errors too... */
@@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status)
 		printk(KERN_WARNING "meth: Rx overflow\n");
 	if (status & (METH_INT_RX_UNDERFLOW)) {
 		printk(KERN_WARNING "meth: Rx underflow\n");
-		spin_lock(&priv->meth_lock);
+		spin_lock_irqsave(&priv->meth_lock, flags);
 		mace->eth.int_stat = METH_INT_RX_UNDERFLOW;
 		/* more underflow interrupts will be delivered,
 		 * effectively throwing us into an infinite loop.
@@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status)
 		priv->dma_ctrl &= ~METH_DMA_RX_EN;
 		mace->eth.dma_ctrl = priv->dma_ctrl;
 		DPRINTK("Disabled meth Rx DMA temporarily\n");
-		spin_unlock(&priv->meth_lock);
+		spin_unlock_irqrestore(&priv->meth_lock, flags);
 	}
 	mace->eth.int_stat = METH_INT_ERROR;
 }
diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c
index 91f50de84be..a276125b709 100644
--- a/drivers/net/mlx4/en_cq.c
+++ b/drivers/net/mlx4/en_cq.c
@@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
 
 	if (cq->is_tx)
 		del_timer(&cq->timer);
-	else
+	else {
 		napi_disable(&cq->napi);
+		netif_napi_del(&cq->napi);
+	}
 
 	mlx4_cq_free(mdev->dev, &cq->mcq);
 }
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 7bcc49de163..e8eeef0c9c9 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -371,7 +371,7 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
 	int i;
 
 	/* If we haven't received a specific coalescing setting
-	 * (module param), we set the moderation paramters as follows:
+	 * (module param), we set the moderation parameters as follows:
 	 * - moder_cnt is set to the number of mtu sized packets to
 	 *   satisfy our coelsing target.
 	 * - moder_time is set to a fixed value.
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index ac6fc499b28..e5c98a98ad3 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -426,7 +426,7 @@ void mlx4_en_poll_tx_cq(unsigned long data)
 
 	INC_PERF_COUNTER(priv->pstats.tx_poll);
 
-	if (!spin_trylock(&ring->comp_lock)) {
+	if (!spin_trylock_irq(&ring->comp_lock)) {
 		mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
 		return;
 	}
@@ -439,7 +439,7 @@ void mlx4_en_poll_tx_cq(unsigned long data)
 	if (inflight && priv->port_up)
 		mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
 
-	spin_unlock(&ring->comp_lock);
+	spin_unlock_irq(&ring->comp_lock);
 }
 
 static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
@@ -482,9 +482,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind)
 
 	/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
 	if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
-		if (spin_trylock(&ring->comp_lock)) {
+		if (spin_trylock_irq(&ring->comp_lock)) {
 			mlx4_en_process_tx_cq(priv->dev, cq);
-			spin_unlock(&ring->comp_lock);
+			spin_unlock_irq(&ring->comp_lock);
 		}
 }
 
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index a400d7115f7..6bb5af35eda 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 		if (rxq->rx_curr_desc == rxq->rx_ring_size)
 			rxq->rx_curr_desc = 0;
 
-		dma_unmap_single(NULL, rx_desc->buf_ptr,
+		dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr,
 				 rx_desc->buf_size, DMA_FROM_DEVICE);
 		rxq->rx_desc_count--;
 		rx++;
@@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget)
 
 		rx_desc = rxq->rx_desc_area + rx;
 
-		rx_desc->buf_ptr = dma_map_single(NULL, skb->data,
-					mp->skb_size, DMA_FROM_DEVICE);
+		rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
+						  skb->data, mp->skb_size,
+						  DMA_FROM_DEVICE);
 		rx_desc->buf_size = mp->skb_size;
 		rxq->rx_skb[rx] = skb;
 		wmb();
@@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
 
 static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
 {
+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int frag;
 
@@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
 
 		desc->l4i_chk = 0;
 		desc->byte_cnt = this_frag->size;
-		desc->buf_ptr = dma_map_page(NULL, this_frag->page,
-						this_frag->page_offset,
-						this_frag->size,
-						DMA_TO_DEVICE);
+		desc->buf_ptr = dma_map_page(mp->dev->dev.parent,
+					     this_frag->page,
+					     this_frag->page_offset,
+					     this_frag->size, DMA_TO_DEVICE);
 	}
 }
 
@@ -826,7 +828,8 @@ no_csum:
 
 	desc->l4i_chk = l4i_chk;
 	desc->byte_cnt = length;
-	desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+	desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data,
+				       length, DMA_TO_DEVICE);
 
 	__skb_queue_tail(&txq->tx_skb, skb);
 
@@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force)
 		}
 
 		if (cmd_sts & TX_FIRST_DESC) {
-			dma_unmap_single(NULL, desc->buf_ptr,
+			dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
 					 desc->byte_cnt, DMA_TO_DEVICE);
 		} else {
-			dma_unmap_page(NULL, desc->buf_ptr,
+			dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr,
 				       desc->byte_cnt, DMA_TO_DEVICE);
 		}
 
@@ -1894,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index)
 						mp->rx_desc_sram_size);
 		rxq->rx_desc_dma = mp->rx_desc_sram_addr;
 	} else {
-		rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
-							&rxq->rx_desc_dma,
-							GFP_KERNEL);
+		rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+						       size, &rxq->rx_desc_dma,
+						       GFP_KERNEL);
 	}
 
 	if (rxq->rx_desc_area == NULL) {
@@ -1947,7 +1950,7 @@ out_free:
 	if (index == 0 && size <= mp->rx_desc_sram_size)
 		iounmap(rxq->rx_desc_area);
 	else
-		dma_free_coherent(NULL, size,
+		dma_free_coherent(mp->dev->dev.parent, size,
 				  rxq->rx_desc_area,
 				  rxq->rx_desc_dma);
 
@@ -1979,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq)
 	    rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
 		iounmap(rxq->rx_desc_area);
 	else
-		dma_free_coherent(NULL, rxq->rx_desc_area_size,
+		dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size,
 				  rxq->rx_desc_area, rxq->rx_desc_dma);
 
 	kfree(rxq->rx_skb);
@@ -2007,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index)
 						mp->tx_desc_sram_size);
 		txq->tx_desc_dma = mp->tx_desc_sram_addr;
 	} else {
-		txq->tx_desc_area = dma_alloc_coherent(NULL, size,
-							&txq->tx_desc_dma,
-							GFP_KERNEL);
+		txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+						       size, &txq->tx_desc_dma,
+						       GFP_KERNEL);
 	}
 
 	if (txq->tx_desc_area == NULL) {
@@ -2053,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq)
 	    txq->tx_desc_area_size <= mp->tx_desc_sram_size)
 		iounmap(txq->tx_desc_area);
 	else
-		dma_free_coherent(NULL, txq->tx_desc_area_size,
+		dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size,
 				  txq->tx_desc_area, txq->tx_desc_dma);
 }
 
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 8754e44cada..3bd0b5933d5 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3242,8 +3242,8 @@ struct niu {
 	struct niu_parent		*parent;
 
 	u32				flags;
-#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removebale PHY detected*/
-#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removebale PHY */
+#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removeable PHY detected*/
+#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removeable PHY */
 #define NIU_FLAGS_VPD_VALID		0x00800000 /* VPD has valid version */
 #define NIU_FLAGS_MSIX			0x00400000 /* MSI-X in use */
 #define NIU_FLAGS_MCAST			0x00200000 /* multicast filter enabled */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c92ced24794..1fd5ecb2442 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3174,7 +3174,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 	if (value & RST_FO_FR) {
 		QPRINTK(qdev, IFDOWN, ERR,
-			"ETIMEOUT!!! errored out of resetting the chip!\n");
+			"ETIMEDOUT!!! errored out of resetting the chip!\n");
 		status = -ETIMEDOUT;
 	}
 
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 9f81b797f10..ac9493f6c1a 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -141,7 +141,7 @@ end:
 /* We are being asked by firmware to accept
  * a change to the port.  This is only
  * a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode. We wake up a worker
+ * parameters, or loopback mode. We wake up a worker
  * to handler processing this since a mailbox command
  * will need to be sent to ACK the request.
  */
@@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* We are being asked by firmware to accept
 	 * a change to the port.  This is only
 	 * a change to max frame sizes (Tx/Rx), pause
-	 * paramters, or loopback mode.
+	 * parameters, or loopback mode.
 	 */
 	case AEN_IDC_REQ:
 		status = ql_idc_req_aen(qdev);
@@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* Process and inbound IDC event.
 	 * This will happen when we're trying to
 	 * change tx/rx max frame size, change pause
-	 * paramters or loopback mode.
+	 * parameters or loopback mode.
 	 */
 	case AEN_IDC_CMPLT:
 	case AEN_IDC_EXT:
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 0b6e8c89683..3b19e0ce290 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -66,7 +66,6 @@ static const int multicast_filter_limit = 32;
 #define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define EarlyTxThld	0x3F	/* 0x3F means NO early transmit */
-#define RxPacketMaxSize	0x3FE8	/* 16K - 1 - ETH_HLEN - VLAN - CRC... */
 #define SafeMtu		0x1c20	/* ... actually life sucks beyond ~7k */
 #define InterFrameGap	0x03	/* 3 means InterFrameGap = the shortest one */
 
@@ -2357,10 +2356,10 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
 	return cmd;
 }
 
-static void rtl_set_rx_max_size(void __iomem *ioaddr)
+static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
 {
 	/* Low hurts. Let's disable the filtering. */
-	RTL_W16(RxMaxSize, 16383);
+	RTL_W16(RxMaxSize, rx_buf_sz);
 }
 
 static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
@@ -2407,7 +2406,7 @@ static void rtl_hw_start_8169(struct net_device *dev)
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	rtl_set_rx_max_size(ioaddr);
+	rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
 
 	if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
 	    (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
@@ -2668,7 +2667,7 @@ static void rtl_hw_start_8168(struct net_device *dev)
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	rtl_set_rx_max_size(ioaddr);
+	rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
 
 	tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
 
@@ -2846,7 +2845,7 @@ static void rtl_hw_start_8101(struct net_device *dev)
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	rtl_set_rx_max_size(ioaddr);
+	rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
 
 	tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
 
@@ -3554,54 +3553,64 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 	int handled = 0;
 	int status;
 
+	/* loop handling interrupts until we have no new ones or
+	 * we hit a invalid/hotplug case.
+	 */
 	status = RTL_R16(IntrStatus);
+	while (status && status != 0xffff) {
+		handled = 1;
 
-	/* hotplug/major error/no more work/shared irq */
-	if ((status == 0xffff) || !status)
-		goto out;
-
-	handled = 1;
+		/* Handle all of the error cases first. These will reset
+		 * the chip, so just exit the loop.
+		 */
+		if (unlikely(!netif_running(dev))) {
+			rtl8169_asic_down(ioaddr);
+			break;
+		}
 
-	if (unlikely(!netif_running(dev))) {
-		rtl8169_asic_down(ioaddr);
-		goto out;
-	}
+		/* Work around for rx fifo overflow */
+		if (unlikely(status & RxFIFOOver) &&
+		(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+			netif_stop_queue(dev);
+			rtl8169_tx_timeout(dev);
+			break;
+		}
 
-	status &= tp->intr_mask;
-	RTL_W16(IntrStatus,
-		(status & RxFIFOOver) ? (status | RxOverflow) : status);
+		if (unlikely(status & SYSErr)) {
+			rtl8169_pcierr_interrupt(dev);
+			break;
+		}
 
-	if (!(status & tp->intr_event))
-		goto out;
+		if (status & LinkChg)
+			rtl8169_check_link_status(dev, tp, ioaddr);
 
-	/* Work around for rx fifo overflow */
-	if (unlikely(status & RxFIFOOver) &&
-	    (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
-		netif_stop_queue(dev);
-		rtl8169_tx_timeout(dev);
-		goto out;
-	}
+		/* We need to see the lastest version of tp->intr_mask to
+		 * avoid ignoring an MSI interrupt and having to wait for
+		 * another event which may never come.
+		 */
+		smp_rmb();
+		if (status & tp->intr_mask & tp->napi_event) {
+			RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+			tp->intr_mask = ~tp->napi_event;
+
+			if (likely(napi_schedule_prep(&tp->napi)))
+				__napi_schedule(&tp->napi);
+			else if (netif_msg_intr(tp)) {
+				printk(KERN_INFO "%s: interrupt %04x in poll\n",
+				dev->name, status);
+			}
+		}
 
-	if (unlikely(status & SYSErr)) {
-		rtl8169_pcierr_interrupt(dev);
-		goto out;
+		/* We only get a new MSI interrupt when all active irq
+		 * sources on the chip have been acknowledged. So, ack
+		 * everything we've seen and check if new sources have become
+		 * active to avoid blocking all interrupts from the chip.
+		 */
+		RTL_W16(IntrStatus,
+			(status & RxFIFOOver) ? (status | RxOverflow) : status);
+		status = RTL_R16(IntrStatus);
 	}
 
-	if (status & LinkChg)
-		rtl8169_check_link_status(dev, tp, ioaddr);
-
-	if (status & tp->napi_event) {
-		RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
-		tp->intr_mask = ~tp->napi_event;
-
-		if (likely(napi_schedule_prep(&tp->napi)))
-			__napi_schedule(&tp->napi);
-		else if (netif_msg_intr(tp)) {
-			printk(KERN_INFO "%s: interrupt %04x in poll\n",
-			       dev->name, status);
-		}
-	}
-out:
 	return IRQ_RETVAL(handled);
 }
 
@@ -3617,13 +3626,15 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
 
 	if (work_done < budget) {
 		napi_complete(napi);
-		tp->intr_mask = 0xffff;
-		/*
-		 * 20040426: the barrier is not strictly required but the
-		 * behavior of the irq handler could be less predictable
-		 * without it. Btw, the lack of flush for the posted pci
-		 * write is safe - FR
+
+		/* We need for force the visibility of tp->intr_mask
+		 * for other CPUs, as we can loose an MSI interrupt
+		 * and potentially wait for a retransmit timeout if we don't.
+		 * The posted write to IntrMask is safe, as it will
+		 * eventually make it to the chip and we won't loose anything
+		 * until it does.
 		 */
+		tp->intr_mask = 0xffff;
 		smp_wmb();
 		RTL_W16(IntrMask, tp->intr_event);
 	}
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff589988d1..2976757a36f 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
 #define SMT_RDF_SUCCESS	0x00000003	/* success (PMF) */
 #define SMT_RDF_BADSET	0x00000004	/* bad set count (PMF) */
 #define SMT_RDF_ILLEGAL 0x00000005	/* read only (PMF) */
-#define SMT_RDF_NOPARAM	0x6		/* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM	0x6		/* parameter not supported (PMF) */
 #define SMT_RDF_RANGE	0x8		/* out of range */
 #define SMT_RDF_AUTHOR	0x9		/* not autohorized */
 #define SMT_RDF_LENGTH	0x0a		/* length error */
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 329f890e290..f1f773b17fe 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -45,7 +45,8 @@
     defined(CONFIG_MACH_ZYLONITE) ||\
     defined(CONFIG_MACH_LITTLETON) ||\
     defined(CONFIG_MACH_ZYLONITE2) ||\
-    defined(CONFIG_ARCH_VIPER)
+    defined(CONFIG_ARCH_VIPER) ||\
+    defined(CONFIG_MACH_STARGATE2)
 
 #include <asm/mach-types.h>
 
@@ -73,7 +74,7 @@
 /* We actually can't write halfwords properly if not word aligned */
 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 {
-	if (machine_is_mainstone() && reg & 2) {
+	if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
 		unsigned int v = val << 16;
 		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 		writel(v, ioaddr + (reg & ~2));
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 534c0f38483..0337b9d673f 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
 MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
 MODULE_FIRMWARE(FW_NAME);
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16 
  * 0 = Autosense   
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 2e70ee8f145..46a2cc92d97 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -169,7 +169,7 @@ static char *open_min_error[] = {
 	"Monitor Contention failer for RPL", "FDX Protocol Error"
 };
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16
  * 0 = Autosense         
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d068a9d3688..2d819fc8558 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
 				   "Reserved", "Reserved", "No Monitor Detected for RPL", 
 				   "Monitor Contention failer for RPL", "FDX Protocol Error"};
 
-/* Module paramters */
+/* Module parameters */
 
 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; 
 MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; 
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6fcb500257b..61fe80dda3e 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
  *
  * Limitation:
  * Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f3a2fce6166..47f68cfa7e2 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -398,7 +398,7 @@ static void rx_complete (struct urb *urb)
 
 	/* stalls need manual reset. this is rare ... except that
 	 * when going through USB 2.0 TTs, unplug appears this way.
-	 * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 4d1d47953fc..7fa620ddeb2 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -845,6 +845,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 	int err;
 	struct net_device *dev;
 	struct virtnet_info *vi;
+	struct virtqueue *vqs[3];
+	vq_callback_t *callbacks[] = { skb_recv_done, skb_xmit_done, NULL};
+	const char *names[] = { "input", "output", "control" };
+	int nvqs;
 
 	/* Allocate ourselves a network device with room for our info */
 	dev = alloc_etherdev(sizeof(struct virtnet_info));
@@ -905,25 +909,19 @@ static int virtnet_probe(struct virtio_device *vdev)
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
 		vi->mergeable_rx_bufs = true;
 
-	/* We expect two virtqueues, receive then send. */
-	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
-	if (IS_ERR(vi->rvq)) {
-		err = PTR_ERR(vi->rvq);
+	/* We expect two virtqueues, receive then send,
+	 * and optionally control. */
+	nvqs = virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ? 3 : 2;
+
+	err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names);
+	if (err)
 		goto free;
-	}
 
-	vi->svq = vdev->config->find_vq(vdev, 1, skb_xmit_done);
-	if (IS_ERR(vi->svq)) {
-		err = PTR_ERR(vi->svq);
-		goto free_recv;
-	}
+	vi->rvq = vqs[0];
+	vi->svq = vqs[1];
 
 	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
-		vi->cvq = vdev->config->find_vq(vdev, 2, NULL);
-		if (IS_ERR(vi->cvq)) {
-			err = PTR_ERR(vi->svq);
-			goto free_send;
-		}
+		vi->cvq = vqs[2];
 
 		if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
 			dev->features |= NETIF_F_HW_VLAN_FILTER;
@@ -941,7 +939,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	err = register_netdev(dev);
 	if (err) {
 		pr_debug("virtio_net: registering device failed\n");
-		goto free_ctrl;
+		goto free_vqs;
 	}
 
 	/* Last of all, set up some receive buffers. */
@@ -962,13 +960,8 @@ static int virtnet_probe(struct virtio_device *vdev)
 
 unregister:
 	unregister_netdev(dev);
-free_ctrl:
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
-		vdev->config->del_vq(vi->cvq);
-free_send:
-	vdev->config->del_vq(vi->svq);
-free_recv:
-	vdev->config->del_vq(vi->rvq);
+free_vqs:
+	vdev->config->del_vqs(vdev);
 free:
 	free_netdev(dev);
 	return err;
@@ -994,12 +987,10 @@ static void virtnet_remove(struct virtio_device *vdev)
 
 	BUG_ON(vi->num != 0);
 
-	vdev->config->del_vq(vi->svq);
-	vdev->config->del_vq(vi->rvq);
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
-		vdev->config->del_vq(vi->cvq);
 	unregister_netdev(vi->dev);
 
+	vdev->config->del_vqs(vi->vdev);
+
 	while (vi->pages)
 		__free_pages(get_a_page(vi, GFP_KERNEL), 0);
 
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 7be0ae10d69..c2eeac4125f 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp)
 		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON|
 		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON|
 		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR|
-		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32),
+		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32),
 		&vp_reg->kdfcctl_errors_mask);
 
 	__vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask);
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5d6aa..a6dc317083d 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev)
 		free_buffer_irq(port->tx_buff_tab[n_desc]);
 		port->tx_buff_tab[n_desc] = NULL;
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq,
 			       tx_desc_phys(port, n_desc), desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
 			       " ready\n", dev->name);
@@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
 			       dev->name);
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 02419bfd64b..f9fc3890232 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq,
 			roq_data = (struct i2400m_roq_data *) &skb->cb;
 			i2400m_net_erx(i2400m, skb, roq_data->cs);
 		}
-		else {
+		else
 			__i2400m_roq_queue(i2400m, roq, skb, sn, nsn);
-			__i2400m_roq_update_ws(i2400m, roq, sn + 1);
-		}
+		__i2400m_roq_update_ws(i2400m, roq, sn + 1);
 		i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS,
 				   old_ws, len, sn, nsn, roq->ws);
 	}
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index ca4151a9e22..17851321b7f 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -505,27 +505,52 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg)
 #ifdef CONFIG_PM
 	struct usb_device *usb_dev = i2400mu->usb_dev;
 #endif
+	unsigned is_autosuspend = 0;
 	struct i2400m *i2400m = &i2400mu->i2400m;
 
+#ifdef CONFIG_PM
+	if (usb_dev->auto_pm > 0)
+		is_autosuspend = 1;
+#endif
+
 	d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
 	if (i2400m->updown == 0)
 		goto no_firmware;
-	d_printf(1, dev, "fw up, requesting standby\n");
+	if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
+		/* ugh -- the device is connected and this suspend
+		 * request is an autosuspend one (not a system standby
+		 * / hibernate).
+		 *
+		 * The only way the device can go to standby is if the
+		 * link with the base station is in IDLE mode; that
+		 * were the case, we'd be in status
+		 * I2400M_SS_CONNECTED_IDLE. But we are not.
+		 *
+		 * If we *tell* him to go power save now, it'll reset
+		 * as a precautionary measure, so if this is an
+		 * autosuspend thing, say no and it'll come back
+		 * later, when the link is IDLE
+		 */
+		result = -EBADF;
+		d_printf(1, dev, "fw up, link up, not-idle, autosuspend: "
+			 "not entering powersave\n");
+		goto error_not_now;
+	}
+	d_printf(1, dev, "fw up: entering powersave\n");
 	atomic_dec(&i2400mu->do_autopm);
 	result = i2400m_cmd_enter_powersave(i2400m);
 	atomic_inc(&i2400mu->do_autopm);
-#ifdef CONFIG_PM
-	if (result < 0 && usb_dev->auto_pm == 0) {
+	if (result < 0 && !is_autosuspend) {
 		/* System suspend, can't fail */
 		dev_err(dev, "failed to suspend, will reset on resume\n");
 		result = 0;
 	}
-#endif
 	if (result < 0)
 		goto error_enter_powersave;
 	i2400mu_notification_release(i2400mu);
-	d_printf(1, dev, "fw up, got standby\n");
+	d_printf(1, dev, "powersave requested\n");
 error_enter_powersave:
+error_not_now:
 no_firmware:
 	d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n",
 		iface, pm_msg.event, result);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 8a0823588c5..3359497012a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -310,7 +310,7 @@ config PRISM54
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called prism54.ko.
+	  The module will be called prism54.
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
@@ -430,6 +430,7 @@ config RTL8187
 	  ASUS P5B Deluxe
 	  Toshiba Satellite Pro series of laptops
 	  Asus Wireless Link
+	  Linksys WUSB54GC-EU
 
 	  Thanks to Realtek for their support!
 
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index c36d3a3d655..9eabf4d1f2e 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -6467,6 +6467,7 @@ static int airo_get_encode(struct net_device *dev,
 {
 	struct airo_info *local = dev->ml_priv;
 	int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+	int wep_key_len;
 	u8 buf[16];
 
 	if (!local->wep_capable)
@@ -6500,8 +6501,13 @@ static int airo_get_encode(struct net_device *dev,
 	dwrq->flags |= index + 1;
 
 	/* Copy the key to the user buffer */
-	dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
-	memcpy(extra, buf, dwrq->length);
+	wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf));
+	if (wep_key_len < 0) {
+		dwrq->length = 0;
+	} else {
+		dwrq->length = wep_key_len;
+		memcpy(extra, buf, dwrq->length);
+	}
 
 	return 0;
 }
@@ -6614,7 +6620,7 @@ static int airo_get_encodeext(struct net_device *dev,
 	struct airo_info *local = dev->ml_priv;
 	struct iw_point *encoding = &wrqu->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
+	int idx, max_key_len, wep_key_len;
 	u8 buf[16];
 
 	if (!local->wep_capable)
@@ -6658,8 +6664,13 @@ static int airo_get_encodeext(struct net_device *dev,
 	memset(extra, 0, 16);
 	
 	/* Copy the key to the user buffer */
-	ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
-	memcpy(extra, buf, ext->key_len);
+	wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
+	if (wep_key_len < 0) {
+		ext->key_len = 0;
+	} else {
+		ext->key_len = wep_key_len;
+		memcpy(extra, buf, ext->key_len);
+	}
 
 	return 0;
 }
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 744f4f4dd3d..8d93ca4651b 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1873,18 +1873,18 @@ static void at76_dwork_hw_scan(struct work_struct *work)
 	if (ret != CMD_STATUS_COMPLETE) {
 		queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
 				   SCAN_POLL_INTERVAL);
-		goto exit;
+		mutex_unlock(&priv->mtx);
+		return;
 	}
 
-	ieee80211_scan_completed(priv->hw, false);
-
 	if (is_valid_ether_addr(priv->bssid))
 		at76_join(priv);
 
-	ieee80211_wake_queues(priv->hw);
-
-exit:
 	mutex_unlock(&priv->mtx);
+
+	ieee80211_scan_completed(priv->hw, false);
+
+	ieee80211_wake_queues(priv->hw);
 }
 
 static int at76_hw_scan(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index a08bc8a4fb6..32df27a9c7a 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -214,7 +214,7 @@ static struct pci_driver ath5k_pci_driver = {
  * Prototypes - MAC 802.11 stack related functions
  */
 static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
 static int ath5k_reset_wake(struct ath5k_softc *sc);
 static int ath5k_start(struct ieee80211_hw *hw);
 static void ath5k_stop(struct ieee80211_hw *hw);
@@ -1038,16 +1038,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 	if (chan->center_freq != sc->curchan->center_freq ||
 		chan->hw_value != sc->curchan->hw_value) {
 
-		sc->curchan = chan;
-		sc->curband = &sc->sbands[chan->band];
-
 		/*
 		 * To switch channels clear any pending DMA operations;
 		 * wait long enough for the RX fifo to drain, reset the
 		 * hardware at the new frequency, and then re-enable
 		 * the relevant bits of the h/w.
 		 */
-		return ath5k_reset(sc, true, true);
+		return ath5k_reset(sc, chan);
 	}
 
 	return 0;
@@ -2314,7 +2311,7 @@ ath5k_init(struct ath5k_softc *sc)
 	sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
 		AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
 		AR5K_INT_FATAL | AR5K_INT_GLOBAL;
-	ret = ath5k_reset(sc, false, false);
+	ret = ath5k_reset(sc, NULL);
 	if (ret)
 		goto done;
 
@@ -2599,18 +2596,25 @@ drop_packet:
 	return NETDEV_TX_OK;
 }
 
+/*
+ * Reset the hardware.  If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ */
 static int
-ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 {
 	struct ath5k_hw *ah = sc->ah;
 	int ret;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
-	if (stop) {
+	if (chan) {
 		ath5k_hw_set_imr(ah, 0);
 		ath5k_txq_cleanup(sc);
 		ath5k_rx_stop(sc);
+
+		sc->curchan = chan;
+		sc->curband = &sc->sbands[chan->band];
 	}
 	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
 	if (ret) {
@@ -2648,7 +2652,7 @@ ath5k_reset_wake(struct ath5k_softc *sc)
 {
 	int ret;
 
-	ret = ath5k_reset(sc, true, true);
+	ret = ath5k_reset(sc, sc->curchan);
 	if (!ret)
 		ieee80211_wake_queues(sc->hw);
 
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index 9e2faae5ae9..b48b29dca3d 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1487,28 +1487,35 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
 {
 	s8 tmp;
 	s16 min_pwrL, min_pwrR;
-	s16 pwr_i = pwrL[0];
-
-	do {
-		pwr_i--;
-		tmp = (s8) ath5k_get_interpolated_value(pwr_i,
-						pwrL[0], pwrL[1],
-						stepL[0], stepL[1]);
-
-	} while (tmp > 1);
-
-	min_pwrL = pwr_i;
-
-	pwr_i = pwrR[0];
-	do {
-		pwr_i--;
-		tmp = (s8) ath5k_get_interpolated_value(pwr_i,
-						pwrR[0], pwrR[1],
-						stepR[0], stepR[1]);
-
-	} while (tmp > 1);
+	s16 pwr_i;
+
+	if (pwrL[0] == pwrL[1])
+		min_pwrL = pwrL[0];
+	else {
+		pwr_i = pwrL[0];
+		do {
+			pwr_i--;
+			tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+							pwrL[0], pwrL[1],
+							stepL[0], stepL[1]);
+		} while (tmp > 1);
+
+		min_pwrL = pwr_i;
+	}
 
-	min_pwrR = pwr_i;
+	if (pwrR[0] == pwrR[1])
+		min_pwrR = pwrR[0];
+	else {
+		pwr_i = pwrR[0];
+		do {
+			pwr_i--;
+			tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+							pwrR[0], pwrR[1],
+							stepR[0], stepR[1]);
+		} while (tmp > 1);
+
+		min_pwrR = pwr_i;
+	}
 
 	/* Keep the right boundary so that it works for both curves */
 	return max(min_pwrL, min_pwrR);
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
index 7a17d31b2fd..5f72c111c2e 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -26,7 +26,7 @@
 \*****************************/
 
 #include <linux/pci.h> 		/* To determine if a card is pci-e */
-#include <linux/bitops.h>	/* For get_bitmask_order */
+#include <linux/log2.h>
 #include "ath5k.h"
 #include "reg.h"
 #include "base.h"
@@ -69,10 +69,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 
 	/* Get exponent
 	 * ALGO: coef_exp = 14 - highest set bit position */
-	coef_exp = get_bitmask_order(coef_scaled);
+	coef_exp = ilog2(coef_scaled);
 
 	/* Doesn't make sense if it's zero*/
-	if (!coef_exp)
+	if (!coef_scaled || !coef_exp)
 		return -EINVAL;
 
 	/* Note: we've shifted coef_scaled by 24 */
@@ -359,7 +359,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
 
 			if (ah->ah_radio == AR5K_RF5413)
-				clock |= AR5K_PHY_PLL_40MHZ_5413;
+				clock = AR5K_PHY_PLL_40MHZ_5413;
 			else
 				clock |= AR5K_PHY_PLL_40MHZ;
 
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207bce2..c15db229351 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
 	PLX/PCI/CS version of the driver to actually use the driver.
 
 	The driver can be compiled as a module and it will be called
-	"hostap.ko".
+	hostap.
 
 config HOSTAP_FIRMWARE
 	bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_plx.ko".
+	hostap_plx.
 
 config HOSTAP_PCI
 	tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_pci.ko".
+	hostap_pci.
 
 config HOSTAP_CS
 	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_cs.ko".
+	hostap_cs.
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f6406a1..736162324ba 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -75,7 +75,7 @@ config IWLAGN
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwlagn.ko.
+	  module will be called iwlagn.
 
 
 config IWL4965
@@ -113,7 +113,7 @@ config IWL3945
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl3945.ko.
+	  module will be called iwl3945.
 
 config IWL3945_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index e5ca2511a81..9452461ce86 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -46,7 +46,7 @@
 #include "iwl-6000-hw.h"
 
 /* Highest firmware API version supported */
-#define IWL5000_UCODE_API_MAX 1
+#define IWL5000_UCODE_API_MAX 2
 #define IWL5150_UCODE_API_MAX 2
 
 /* Lowest firmware API version supported */
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index edfa5e149f7..bd438d8acf5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -101,8 +101,8 @@ struct iwl_cfg iwl6000_2agn_cfg = {
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
 	.need_pll_cfg = false,
 };
 
@@ -117,8 +117,8 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
 	.need_pll_cfg = false,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 1ef4192207a..f46ba247577 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -669,13 +669,6 @@ static int iwl_set_mode(struct iwl_priv *priv, int mode)
 	if (!iwl_is_ready_rf(priv))
 		return -EAGAIN;
 
-	cancel_delayed_work(&priv->scan_check);
-	if (iwl_scan_cancel_timeout(priv, 100)) {
-		IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
-		IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
-		return -EAGAIN;
-	}
-
 	iwl_commit_rxon(priv);
 
 	return 0;
@@ -3636,7 +3629,9 @@ static struct pci_device_id iwl_hw_card_ids[] = {
 	{IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)},
 	{IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)},
 	{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)},
 	{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index e7c65c4f741..6330b91e37c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -227,9 +227,6 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 	/* The HW is no longer scanning */
 	clear_bit(STATUS_SCAN_HW, &priv->status);
 
-	/* The scan completion notification came in, so kill that timer... */
-	cancel_delayed_work(&priv->scan_check);
-
 	IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
 		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
 						"2.4" : "5.2",
@@ -712,6 +709,8 @@ static void iwl_bg_request_scan(struct work_struct *data)
 
 	mutex_lock(&priv->mutex);
 
+	cancel_delayed_work(&priv->scan_check);
+
 	if (!iwl_is_ready(priv)) {
 		IWL_WARN(priv, "request scan called when driver not ready.\n");
 		goto done;
@@ -925,6 +924,8 @@ void iwl_bg_scan_completed(struct work_struct *work)
 
 	IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
 
+	cancel_delayed_work(&priv->scan_check);
+
 	ieee80211_scan_completed(priv->hw, false);
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4cce6613350..ff4d0e41d7c 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -782,13 +782,6 @@ static int iwl3945_set_mode(struct iwl_priv *priv, int mode)
 	if (!iwl_is_ready_rf(priv))
 		return -EAGAIN;
 
-	cancel_delayed_work(&priv->scan_check);
-	if (iwl_scan_cancel_timeout(priv, 100)) {
-		IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
-		IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
-		return -EAGAIN;
-	}
-
 	iwl3945_commit_rxon(priv);
 
 	return 0;
@@ -3298,6 +3291,8 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 
 	mutex_lock(&priv->mutex);
 
+	cancel_delayed_work(&priv->scan_check);
+
 	if (!iwl_is_ready(priv)) {
 		IWL_WARN(priv, "request scan called when driver not ready.\n");
 		goto done;
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index bebf735cd4b..ff0042ffe3e 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -584,7 +584,7 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
 	ret = rndis_set_oid(dev, OID_GEN_RNDIS_CONFIG_PARAMETER,
 							infobuf, info_len);
 	if (ret != 0)
-		devdbg(dev, "setting rndis config paramater failed, %d.", ret);
+		devdbg(dev, "setting rndis config parameter failed, %d.", ret);
 
 	kfree(infobuf);
 	return ret;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..1ae11c7f17a 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
 
 	  When building one of the individual drivers, the rt2x00 library
 	  will also be created. That library (when the driver is built as
-	  a module) will be called "rt2x00lib.ko".
+	  a module) will be called rt2x00lib.
 
 	  Additionally PCI and USB libraries will also be build depending
 	  on the types of drivers being selected, these libraries will be
-	  called "rt2x00pci.ko" and "rt2x00usb.ko".
+	  called rt2x00pci and rt2x00usb.
 
 if RT2X00
 
@@ -26,7 +26,7 @@ config RT2400PCI
 	  This adds support for rt2400 wireless chipset family.
 	  Supported chips: RT2460.
 
-	  When compiled as a module, this driver will be called "rt2400pci.ko".
+	  When compiled as a module, this driver will be called rt2400pci.
 
 config RT2500PCI
 	tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2560.
 
-	  When compiled as a module, this driver will be called "rt2500pci.ko".
+	  When compiled as a module, this driver will be called rt2500pci.
 
 config RT61PCI
 	tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2561, RT2561S & RT2661.
 
-	  When compiled as a module, this driver will be called "rt61pci.ko".
+	  When compiled as a module, this driver will be called rt61pci.
 
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2571 & RT2572.
 
-	  When compiled as a module, this driver will be called "rt2500usb.ko".
+	  When compiled as a module, this driver will be called rt2500usb.
 
 config RT73USB
 	tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,7 @@ config RT73USB
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2571W, RT2573 & RT2671.
 
-	  When compiled as a module, this driver will be called "rt73usb.ko".
+	  When compiled as a module, this driver will be called rt73usb.
 
 config RT2X00_LIB_PCI
 	tristate
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 07d378ef0b4..7b3ee8c2eae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -138,7 +138,7 @@ void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
 
 	if (cipher == CIPHER_TKIP_NO_MIC)
 		cipher = CIPHER_TKIP;
-	if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+	if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX)
 		return;
 
 	/* Remove CIPHER_NONE index */
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d..d83e3794d34 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -235,7 +235,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
  * Initialize work structure and all link tuning related
- * paramters. This will not start the link tuning process itself.
+ * parameters. This will not start the link tuning process itself.
  */
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index 9718f61809c..edeff82a4d0 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -120,6 +120,12 @@ struct rtl8187_priv {
 		__le64 buf;
 		struct sk_buff_head queue;
 	} b_tx_status; /* This queue is used by both -b and non-b devices */
+	struct mutex io_mutex;
+	union {
+		u8 bits8;
+		__le16 bits16;
+		__le32 bits32;
+	} *io_dmabuf;
 };
 
 void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
@@ -129,10 +135,14 @@ static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
 {
 	u8 val;
 
+	mutex_lock(&priv->io_mutex);
 	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
 			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+	val = priv->io_dmabuf->bits8;
+	mutex_unlock(&priv->io_mutex);
 
 	return val;
 }
@@ -147,10 +157,14 @@ static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
 {
 	__le16 val;
 
+	mutex_lock(&priv->io_mutex);
 	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
 			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+	val = priv->io_dmabuf->bits16;
+	mutex_unlock(&priv->io_mutex);
 
 	return le16_to_cpu(val);
 }
@@ -165,10 +179,14 @@ static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
 {
 	__le32 val;
 
+	mutex_lock(&priv->io_mutex);
 	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
 			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+	val = priv->io_dmabuf->bits32;
+	mutex_unlock(&priv->io_mutex);
 
 	return le32_to_cpu(val);
 }
@@ -181,10 +199,15 @@ static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
 static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
 					u8 *addr, u8 val, u8 idx)
 {
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits8 = val;
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 }
 
 static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
@@ -195,12 +218,15 @@ static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
 static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
 					 __le16 *addr, u16 val, u8 idx)
 {
-	__le16 buf = cpu_to_le16(val);
+	mutex_lock(&priv->io_mutex);
 
+	priv->io_dmabuf->bits16 = cpu_to_le16(val);
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
-			HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 }
 
 static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
@@ -212,12 +238,15 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
 static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
 					 __le32 *addr, u32 val, u8 idx)
 {
-	__le32 buf = cpu_to_le32(val);
+	mutex_lock(&priv->io_mutex);
 
+	priv->io_dmabuf->bits32 = cpu_to_le32(val);
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
-			HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 }
 
 static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index fd81884b9c7..d51ba0a88c2 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -71,6 +71,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
 	/* AirLive */
 	{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
+	/* Linksys */
+	{USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
 	{}
 };
 
@@ -1329,6 +1331,14 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	priv = dev->priv;
 	priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
 
+	/* allocate "DMA aware" buffer for register accesses */
+	priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
+	if (!priv->io_dmabuf) {
+		err = -ENOMEM;
+		goto err_free_dev;
+	}
+	mutex_init(&priv->io_mutex);
+
 	SET_IEEE80211_DEV(dev, &intf->dev);
 	usb_set_intfdata(intf, dev);
 	priv->udev = udev;
@@ -1495,7 +1505,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	err = ieee80211_register_hw(dev);
 	if (err) {
 		printk(KERN_ERR "rtl8187: Cannot register device\n");
-		goto err_free_dev;
+		goto err_free_dmabuf;
 	}
 	mutex_init(&priv->conf_mutex);
 	skb_queue_head_init(&priv->b_tx_status.queue);
@@ -1506,6 +1516,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	return 0;
 
+ err_free_dmabuf:
+	kfree(priv->io_dmabuf);
  err_free_dev:
 	ieee80211_free_hw(dev);
 	usb_set_intfdata(intf, NULL);
@@ -1526,6 +1538,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
 	priv = dev->priv;
 	usb_reset_device(priv->udev);
 	usb_put_dev(interface_to_usbdev(intf));
+	kfree(priv->io_dmabuf);
 	ieee80211_free_hw(dev);
 }
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
index 78df281b297..a09819386a1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -88,9 +88,15 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
 	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
 	udelay(10);
 
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits16 = data;
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			addr, 0x8225, &data, sizeof(data), HZ / 2);
+			addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
+			HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 
 	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
 	udelay(10);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e55b33961ae..fa2821be44c 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -138,7 +138,7 @@ psa_read(struct net_device *	dev,
 
 /*------------------------------------------------------------------*/
 /*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
  */
 static void
 psa_write(struct net_device *	dev,
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index f821dbc952a..27f3b81333d 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,21 +1,21 @@
 config OF_DEVICE
 	def_bool y
-	depends on OF && (SPARC || PPC_OF)
+	depends on OF && (SPARC || PPC_OF || MICROBLAZE)
 
 config OF_GPIO
 	def_bool y
-	depends on OF && PPC_OF && GPIOLIB
+	depends on OF && (PPC_OF || MICROBLAZE) && GPIOLIB
 	help
 	  OpenFirmware GPIO accessors
 
 config OF_I2C
 	def_tristate I2C
-	depends on PPC_OF && I2C
+	depends on (PPC_OF || MICROBLAZE) && I2C
 	help
 	  OpenFirmware I2C accessors
 
 config OF_SPI
 	def_tristate SPI
-	depends on OF && PPC_OF && SPI
+	depends on OF && (PPC_OF || MICROBLAZE) && SPI
 	help
 	  OpenFirmware SPI accessors
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index f0e99d4c066..242257b1944 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -78,16 +78,20 @@ void free_cpu_buffers(void)
 	op_ring_buffer_write = NULL;
 }
 
+#define RB_EVENT_HDR_SIZE 4
+
 int alloc_cpu_buffers(void)
 {
 	int i;
 
 	unsigned long buffer_size = oprofile_cpu_buffer_size;
+	unsigned long byte_size = buffer_size * (sizeof(struct op_sample) +
+						 RB_EVENT_HDR_SIZE);
 
-	op_ring_buffer_read = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS);
+	op_ring_buffer_read = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
 	if (!op_ring_buffer_read)
 		goto fail;
-	op_ring_buffer_write = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS);
+	op_ring_buffer_write = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
 	if (!op_ring_buffer_write)
 		goto fail;
 
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 73348c4047e..4a9cc92d4d1 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -702,7 +702,7 @@ static unsigned int iosapic_startup_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void iosapic_set_affinity_irq(unsigned int irq,
+static int iosapic_set_affinity_irq(unsigned int irq,
 				     const struct cpumask *dest)
 {
 	struct vector_info *vi = iosapic_get_vector(irq);
@@ -712,7 +712,7 @@ static void iosapic_set_affinity_irq(unsigned int irq,
 
 	dest_cpu = cpu_check_affinity(irq, dest);
 	if (dest_cpu < 0)
-		return;
+		return -1;
 
 	cpumask_copy(irq_desc[irq].affinity, cpumask_of(dest_cpu));
 	vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
@@ -724,6 +724,8 @@ static void iosapic_set_affinity_irq(unsigned int irq,
 	iosapic_set_irt_data(vi, &dummy_d0, &d1);
 	iosapic_wr_irt_entry(vi, d0, d1);
 	spin_unlock_irqrestore(&iosapic_lock, flags);
+
+	return 0;
 }
 #endif
 
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index e6a7e847ee8..ea31a452b15 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -352,8 +352,8 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
 	unsigned long port;
 
 	if (!dev->irq) {
-		printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
-			dev->hpa.start);
+		printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+			(unsigned long long)dev->hpa.start);
 		return -ENODEV;
 	}
 
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 4e63cc9e277..151bf5bc8af 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1,5 +1,5 @@
 /* Low-level parallel-port routines for 8255-based PC-style hardware.
- * 
+ *
  * Authors: Phil Blundell <philb@gnu.org>
  *          Tim Waugh <tim@cyberelk.demon.co.uk>
  *	    Jose Renau <renau@acm.org>
@@ -11,7 +11,7 @@
  * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
  * DMA support - Bert De Jonghe <bert@sophis.be>
  * Many ECP bugs fixed.  Fred Barnes & Jamie Lokier, 1999
- * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. 
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
  * Various hacks, Fred Barnes, 04/2001
  * Updated probing logic - Adam Belay <ambx1@neo.rr.com>
  */
@@ -56,10 +56,10 @@
 #include <linux/pnp.h>
 #include <linux/platform_device.h>
 #include <linux/sysctl.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/uaccess.h>
 
 #include <linux/parport.h>
 #include <linux/parport_pc.h>
@@ -82,7 +82,7 @@
 #define ECR_TST 06
 #define ECR_CNF 07
 #define ECR_MODE_MASK 0xe0
-#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
+#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v))
 
 #undef DEBUG
 
@@ -109,27 +109,27 @@ static int pci_registered_parport;
 static int pnp_registered_parport;
 
 /* frob_control, but for ECR */
-static void frob_econtrol (struct parport *pb, unsigned char m,
+static void frob_econtrol(struct parport *pb, unsigned char m,
 			   unsigned char v)
 {
 	unsigned char ectr = 0;
 
 	if (m != 0xff)
-		ectr = inb (ECONTROL (pb));
+		ectr = inb(ECONTROL(pb));
 
-	DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+	DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
 		m, v, ectr, (ectr & ~m) ^ v);
 
-	outb ((ectr & ~m) ^ v, ECONTROL (pb));
+	outb((ectr & ~m) ^ v, ECONTROL(pb));
 }
 
-static __inline__ void frob_set_mode (struct parport *p, int mode)
+static inline void frob_set_mode(struct parport *p, int mode)
 {
-	frob_econtrol (p, ECR_MODE_MASK, mode << 5);
+	frob_econtrol(p, ECR_MODE_MASK, mode << 5);
 }
 
 #ifdef CONFIG_PARPORT_PC_FIFO
-/* Safely change the mode bits in the ECR 
+/* Safely change the mode bits in the ECR
    Returns:
 	    0    : Success
 	   -EBUSY: Could not drain FIFO in some finite amount of time,
@@ -141,17 +141,18 @@ static int change_mode(struct parport *p, int m)
 	unsigned char oecr;
 	int mode;
 
-	DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
+	DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
 
 	if (!priv->ecr) {
-		printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
+		printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
 		return 0;
 	}
 
 	/* Bits <7:5> contain the mode. */
-	oecr = inb (ECONTROL (p));
+	oecr = inb(ECONTROL(p));
 	mode = (oecr >> 5) & 0x7;
-	if (mode == m) return 0;
+	if (mode == m)
+		return 0;
 
 	if (mode >= 2 && !(priv->ctr & 0x20)) {
 		/* This mode resets the FIFO, so we may
@@ -163,19 +164,21 @@ static int change_mode(struct parport *p, int m)
 		case ECR_ECP: /* ECP Parallel Port mode */
 			/* Busy wait for 200us */
 			for (counter = 0; counter < 40; counter++) {
-				if (inb (ECONTROL (p)) & 0x01)
+				if (inb(ECONTROL(p)) & 0x01)
+					break;
+				if (signal_pending(current))
 					break;
-				if (signal_pending (current)) break;
-				udelay (5);
+				udelay(5);
 			}
 
 			/* Poll slowly. */
-			while (!(inb (ECONTROL (p)) & 0x01)) {
-				if (time_after_eq (jiffies, expire))
+			while (!(inb(ECONTROL(p)) & 0x01)) {
+				if (time_after_eq(jiffies, expire))
 					/* The FIFO is stuck. */
 					return -EBUSY;
-				schedule_timeout_interruptible(msecs_to_jiffies(10));
-				if (signal_pending (current))
+				schedule_timeout_interruptible(
+							msecs_to_jiffies(10));
+				if (signal_pending(current))
 					break;
 			}
 		}
@@ -185,20 +188,20 @@ static int change_mode(struct parport *p, int m)
 		/* We have to go through mode 001 */
 		oecr &= ~(7 << 5);
 		oecr |= ECR_PS2 << 5;
-		ECR_WRITE (p, oecr);
+		ECR_WRITE(p, oecr);
 	}
 
 	/* Set the mode. */
 	oecr &= ~(7 << 5);
 	oecr |= m << 5;
-	ECR_WRITE (p, oecr);
+	ECR_WRITE(p, oecr);
 	return 0;
 }
 
 #ifdef CONFIG_PARPORT_1284
 /* Find FIFO lossage; FIFO is reset */
 #if 0
-static int get_fifo_residue (struct parport *p)
+static int get_fifo_residue(struct parport *p)
 {
 	int residue;
 	int cnfga;
@@ -206,26 +209,26 @@ static int get_fifo_residue (struct parport *p)
 
 	/* Adjust for the contents of the FIFO. */
 	for (residue = priv->fifo_depth; ; residue--) {
-		if (inb (ECONTROL (p)) & 0x2)
+		if (inb(ECONTROL(p)) & 0x2)
 				/* Full up. */
 			break;
 
-		outb (0, FIFO (p));
+		outb(0, FIFO(p));
 	}
 
-	printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+	printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
 		residue);
 
 	/* Reset the FIFO. */
-	frob_set_mode (p, ECR_PS2);
+	frob_set_mode(p, ECR_PS2);
 
 	/* Now change to config mode and clean up. FIXME */
-	frob_set_mode (p, ECR_CNF);
-	cnfga = inb (CONFIGA (p));
-	printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+	frob_set_mode(p, ECR_CNF);
+	cnfga = inb(CONFIGA(p));
+	printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
 
 	if (!(cnfga & (1<<2))) {
-		printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+		printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
 		residue++;
 	}
 
@@ -233,9 +236,11 @@ static int get_fifo_residue (struct parport *p)
 	 * PWord != 1 byte. */
 
 	/* Back to PS2 mode. */
-	frob_set_mode (p, ECR_PS2);
+	frob_set_mode(p, ECR_PS2);
 
-	DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
+	DPRINTK(KERN_DEBUG
+	     "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
+							inb(ECONTROL(p)));
 	return residue;
 }
 #endif  /*  0 */
@@ -257,8 +262,8 @@ static int clear_epp_timeout(struct parport *pb)
 	/* To clear timeout some chips require double read */
 	parport_pc_read_status(pb);
 	r = parport_pc_read_status(pb);
-	outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
-	outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+	outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */
+	outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */
 	r = parport_pc_read_status(pb);
 
 	return !(r & 0x01);
@@ -272,7 +277,8 @@ static int clear_epp_timeout(struct parport *pb)
  * of these are in parport_pc.h.
  */
 
-static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
+static void parport_pc_init_state(struct pardevice *dev,
+						struct parport_state *s)
 {
 	s->u.pc.ctr = 0xc;
 	if (dev->irq_func &&
@@ -289,22 +295,23 @@ static void parport_pc_save_state(struct parport *p, struct parport_state *s)
 	const struct parport_pc_private *priv = p->physport->private_data;
 	s->u.pc.ctr = priv->ctr;
 	if (priv->ecr)
-		s->u.pc.ecr = inb (ECONTROL (p));
+		s->u.pc.ecr = inb(ECONTROL(p));
 }
 
-static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
+static void parport_pc_restore_state(struct parport *p,
+						struct parport_state *s)
 {
 	struct parport_pc_private *priv = p->physport->private_data;
 	register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
-	outb (c, CONTROL (p));
+	outb(c, CONTROL(p));
 	priv->ctr = c;
 	if (priv->ecr)
-		ECR_WRITE (p, s->u.pc.ecr);
+		ECR_WRITE(p, s->u.pc.ecr);
 }
 
 #ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
-					size_t length, int flags)
+static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
+				       size_t length, int flags)
 {
 	size_t got = 0;
 
@@ -316,54 +323,52 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
 		 *  nFault is 0 if there is at least 1 byte in the Warp's FIFO
 		 *  pError is 1 if there are 16 bytes in the Warp's FIFO
 		 */
-		status = inb (STATUS (port));
+		status = inb(STATUS(port));
 
-		while (!(status & 0x08) && (got < length)) {
-			if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
+		while (!(status & 0x08) && got < length) {
+			if (left >= 16 && (status & 0x20) && !(status & 0x08)) {
 				/* can grab 16 bytes from warp fifo */
-				if (!((long)buf & 0x03)) {
-					insl (EPPDATA (port), buf, 4);
-				} else {
-					insb (EPPDATA (port), buf, 16);
-				}
+				if (!((long)buf & 0x03))
+					insl(EPPDATA(port), buf, 4);
+				else
+					insb(EPPDATA(port), buf, 16);
 				buf += 16;
 				got += 16;
 				left -= 16;
 			} else {
 				/* grab single byte from the warp fifo */
-				*((char *)buf) = inb (EPPDATA (port));
+				*((char *)buf) = inb(EPPDATA(port));
 				buf++;
 				got++;
 				left--;
 			}
-			status = inb (STATUS (port));
+			status = inb(STATUS(port));
 			if (status & 0x01) {
 				/* EPP timeout should never occur... */
-				printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
-					"w91284pic (should not have done)\n", port->name);
-				clear_epp_timeout (port);
+				printk(KERN_DEBUG
+"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+				clear_epp_timeout(port);
 			}
 		}
 		return got;
 	}
 	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-		if (!(((long)buf | length) & 0x03)) {
-			insl (EPPDATA (port), buf, (length >> 2));
-		} else {
-			insb (EPPDATA (port), buf, length);
-		}
-		if (inb (STATUS (port)) & 0x01) {
-			clear_epp_timeout (port);
+		if (!(((long)buf | length) & 0x03))
+			insl(EPPDATA(port), buf, (length >> 2));
+		else
+			insb(EPPDATA(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			return -EIO;
 		}
 		return length;
 	}
 	for (; got < length; got++) {
-		*((char*)buf) = inb (EPPDATA(port));
+		*((char *)buf) = inb(EPPDATA(port));
 		buf++;
-		if (inb (STATUS (port)) & 0x01) {
+		if (inb(STATUS(port)) & 0x01) {
 			/* EPP timeout */
-			clear_epp_timeout (port);
+			clear_epp_timeout(port);
 			break;
 		}
 	}
@@ -371,28 +376,27 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
 	return got;
 }
 
-static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
-					 size_t length, int flags)
+static size_t parport_pc_epp_write_data(struct parport *port, const void *buf,
+					size_t length, int flags)
 {
 	size_t written = 0;
 
 	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-		if (!(((long)buf | length) & 0x03)) {
-			outsl (EPPDATA (port), buf, (length >> 2));
-		} else {
-			outsb (EPPDATA (port), buf, length);
-		}
-		if (inb (STATUS (port)) & 0x01) {
-			clear_epp_timeout (port);
+		if (!(((long)buf | length) & 0x03))
+			outsl(EPPDATA(port), buf, (length >> 2));
+		else
+			outsb(EPPDATA(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			return -EIO;
 		}
 		return length;
 	}
 	for (; written < length; written++) {
-		outb (*((char*)buf), EPPDATA(port));
+		outb(*((char *)buf), EPPDATA(port));
 		buf++;
-		if (inb (STATUS(port)) & 0x01) {
-			clear_epp_timeout (port);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			break;
 		}
 	}
@@ -400,24 +404,24 @@ static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
 	return written;
 }
 
-static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
+static size_t parport_pc_epp_read_addr(struct parport *port, void *buf,
 					size_t length, int flags)
 {
 	size_t got = 0;
 
 	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-		insb (EPPADDR (port), buf, length);
-		if (inb (STATUS (port)) & 0x01) {
-			clear_epp_timeout (port);
+		insb(EPPADDR(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			return -EIO;
 		}
 		return length;
 	}
 	for (; got < length; got++) {
-		*((char*)buf) = inb (EPPADDR (port));
+		*((char *)buf) = inb(EPPADDR(port));
 		buf++;
-		if (inb (STATUS (port)) & 0x01) {
-			clear_epp_timeout (port);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			break;
 		}
 	}
@@ -425,25 +429,25 @@ static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
 	return got;
 }
 
-static size_t parport_pc_epp_write_addr (struct parport *port,
+static size_t parport_pc_epp_write_addr(struct parport *port,
 					 const void *buf, size_t length,
 					 int flags)
 {
 	size_t written = 0;
 
 	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-		outsb (EPPADDR (port), buf, length);
-		if (inb (STATUS (port)) & 0x01) {
-			clear_epp_timeout (port);
+		outsb(EPPADDR(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			return -EIO;
 		}
 		return length;
 	}
 	for (; written < length; written++) {
-		outb (*((char*)buf), EPPADDR (port));
+		outb(*((char *)buf), EPPADDR(port));
 		buf++;
-		if (inb (STATUS (port)) & 0x01) {
-			clear_epp_timeout (port);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
 			break;
 		}
 	}
@@ -451,74 +455,74 @@ static size_t parport_pc_epp_write_addr (struct parport *port,
 	return written;
 }
 
-static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
-					   size_t length, int flags)
+static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf,
+					  size_t length, int flags)
 {
 	size_t got;
 
-	frob_set_mode (port, ECR_EPP);
-	parport_pc_data_reverse (port);
-	parport_pc_write_control (port, 0x4);
-	got = parport_pc_epp_read_data (port, buf, length, flags);
-	frob_set_mode (port, ECR_PS2);
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_data_reverse(port);
+	parport_pc_write_control(port, 0x4);
+	got = parport_pc_epp_read_data(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
 
 	return got;
 }
 
-static size_t parport_pc_ecpepp_write_data (struct parport *port,
-					    const void *buf, size_t length,
-					    int flags)
+static size_t parport_pc_ecpepp_write_data(struct parport *port,
+					   const void *buf, size_t length,
+					   int flags)
 {
 	size_t written;
 
-	frob_set_mode (port, ECR_EPP);
-	parport_pc_write_control (port, 0x4);
-	parport_pc_data_forward (port);
-	written = parport_pc_epp_write_data (port, buf, length, flags);
-	frob_set_mode (port, ECR_PS2);
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_write_control(port, 0x4);
+	parport_pc_data_forward(port);
+	written = parport_pc_epp_write_data(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
 
 	return written;
 }
 
-static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
-					   size_t length, int flags)
+static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf,
+					  size_t length, int flags)
 {
 	size_t got;
 
-	frob_set_mode (port, ECR_EPP);
-	parport_pc_data_reverse (port);
-	parport_pc_write_control (port, 0x4);
-	got = parport_pc_epp_read_addr (port, buf, length, flags);
-	frob_set_mode (port, ECR_PS2);
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_data_reverse(port);
+	parport_pc_write_control(port, 0x4);
+	got = parport_pc_epp_read_addr(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
 
 	return got;
 }
 
-static size_t parport_pc_ecpepp_write_addr (struct parport *port,
+static size_t parport_pc_ecpepp_write_addr(struct parport *port,
 					    const void *buf, size_t length,
 					    int flags)
 {
 	size_t written;
 
-	frob_set_mode (port, ECR_EPP);
-	parport_pc_write_control (port, 0x4);
-	parport_pc_data_forward (port);
-	written = parport_pc_epp_write_addr (port, buf, length, flags);
-	frob_set_mode (port, ECR_PS2);
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_write_control(port, 0x4);
+	parport_pc_data_forward(port);
+	written = parport_pc_epp_write_addr(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
 
 	return written;
 }
 #endif /* IEEE 1284 support */
 
 #ifdef CONFIG_PARPORT_PC_FIFO
-static size_t parport_pc_fifo_write_block_pio (struct parport *port,
+static size_t parport_pc_fifo_write_block_pio(struct parport *port,
 					       const void *buf, size_t length)
 {
 	int ret = 0;
 	const unsigned char *bufp = buf;
 	size_t left = length;
 	unsigned long expire = jiffies + port->physport->cad->timeout;
-	const int fifo = FIFO (port);
+	const int fifo = FIFO(port);
 	int poll_for = 8; /* 80 usecs */
 	const struct parport_pc_private *priv = port->physport->private_data;
 	const int fifo_depth = priv->fifo_depth;
@@ -526,25 +530,25 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port,
 	port = port->physport;
 
 	/* We don't want to be interrupted every character. */
-	parport_pc_disable_irq (port);
+	parport_pc_disable_irq(port);
 	/* set nErrIntrEn and serviceIntr */
-	frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+	frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
 
 	/* Forward mode. */
-	parport_pc_data_forward (port); /* Must be in PS2 mode */
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
 
 	while (left) {
 		unsigned char byte;
-		unsigned char ecrval = inb (ECONTROL (port));
+		unsigned char ecrval = inb(ECONTROL(port));
 		int i = 0;
 
-		if (need_resched() && time_before (jiffies, expire))
+		if (need_resched() && time_before(jiffies, expire))
 			/* Can't yield the port. */
-			schedule ();
+			schedule();
 
 		/* Anyone else waiting for the port? */
 		if (port->waithead) {
-			printk (KERN_DEBUG "Somebody wants the port\n");
+			printk(KERN_DEBUG "Somebody wants the port\n");
 			break;
 		}
 
@@ -552,21 +556,22 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port,
 			/* FIFO is full. Wait for interrupt. */
 
 			/* Clear serviceIntr */
-			ECR_WRITE (port, ecrval & ~(1<<2));
-		false_alarm:
-			ret = parport_wait_event (port, HZ);
-			if (ret < 0) break;
+			ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+			ret = parport_wait_event(port, HZ);
+			if (ret < 0)
+				break;
 			ret = 0;
-			if (!time_before (jiffies, expire)) {
+			if (!time_before(jiffies, expire)) {
 				/* Timed out. */
-				printk (KERN_DEBUG "FIFO write timed out\n");
+				printk(KERN_DEBUG "FIFO write timed out\n");
 				break;
 			}
-			ecrval = inb (ECONTROL (port));
+			ecrval = inb(ECONTROL(port));
 			if (!(ecrval & (1<<2))) {
 				if (need_resched() &&
-				    time_before (jiffies, expire))
-					schedule ();
+				    time_before(jiffies, expire))
+					schedule();
 
 				goto false_alarm;
 			}
@@ -577,38 +582,38 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port,
 		/* Can't fail now. */
 		expire = jiffies + port->cad->timeout;
 
-	poll:
-		if (signal_pending (current))
+poll:
+		if (signal_pending(current))
 			break;
 
 		if (ecrval & 0x01) {
 			/* FIFO is empty. Blast it full. */
 			const int n = left < fifo_depth ? left : fifo_depth;
-			outsb (fifo, bufp, n);
+			outsb(fifo, bufp, n);
 			bufp += n;
 			left -= n;
 
 			/* Adjust the poll time. */
-			if (i < (poll_for - 2)) poll_for--;
+			if (i < (poll_for - 2))
+				poll_for--;
 			continue;
 		} else if (i++ < poll_for) {
-			udelay (10);
-			ecrval = inb (ECONTROL (port));
+			udelay(10);
+			ecrval = inb(ECONTROL(port));
 			goto poll;
 		}
 
-		/* Half-full (call me an optimist) */
+		/* Half-full(call me an optimist) */
 		byte = *bufp++;
-		outb (byte, fifo);
+		outb(byte, fifo);
 		left--;
-        }
-
-dump_parport_state ("leave fifo_write_block_pio", port);
+	}
+	dump_parport_state("leave fifo_write_block_pio", port);
 	return length - left;
 }
 
 #ifdef HAS_DMA
-static size_t parport_pc_fifo_write_block_dma (struct parport *port,
+static size_t parport_pc_fifo_write_block_dma(struct parport *port,
 					       const void *buf, size_t length)
 {
 	int ret = 0;
@@ -621,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma (struct parport *port,
 	unsigned long start = (unsigned long) buf;
 	unsigned long end = (unsigned long) buf + length - 1;
 
-dump_parport_state ("enter fifo_write_block_dma", port);
+	dump_parport_state("enter fifo_write_block_dma", port);
 	if (end < MAX_DMA_ADDRESS) {
 		/* If it would cross a 64k boundary, cap it at the end. */
 		if ((start ^ end) & ~0xffffUL)
@@ -629,8 +634,9 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 
 		dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
 						       DMA_TO_DEVICE);
-        } else {
-		/* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
+	} else {
+		/* above 16 MB we use a bounce buffer as ISA-DMA
+		   is not possible */
 		maxlen   = PAGE_SIZE;          /* sizeof(priv->dma_buf) */
 		dma_addr = priv->dma_handle;
 		dma_handle = 0;
@@ -639,12 +645,12 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 	port = port->physport;
 
 	/* We don't want to be interrupted every character. */
-	parport_pc_disable_irq (port);
+	parport_pc_disable_irq(port);
 	/* set nErrIntrEn and serviceIntr */
-	frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+	frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
 
 	/* Forward mode. */
-	parport_pc_data_forward (port); /* Must be in PS2 mode */
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
 
 	while (left) {
 		unsigned long expire = jiffies + port->physport->cad->timeout;
@@ -665,10 +671,10 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 		set_dma_count(port->dma, count);
 
 		/* Set DMA mode */
-		frob_econtrol (port, 1<<3, 1<<3);
+		frob_econtrol(port, 1<<3, 1<<3);
 
 		/* Clear serviceIntr */
-		frob_econtrol (port, 1<<2, 0);
+		frob_econtrol(port, 1<<2, 0);
 
 		enable_dma(port->dma);
 		release_dma_lock(dmaflag);
@@ -676,20 +682,22 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 		/* assume DMA will be successful */
 		left -= count;
 		buf  += count;
-		if (dma_handle) dma_addr += count;
+		if (dma_handle)
+			dma_addr += count;
 
 		/* Wait for interrupt. */
-	false_alarm:
-		ret = parport_wait_event (port, HZ);
-		if (ret < 0) break;
+false_alarm:
+		ret = parport_wait_event(port, HZ);
+		if (ret < 0)
+			break;
 		ret = 0;
-		if (!time_before (jiffies, expire)) {
+		if (!time_before(jiffies, expire)) {
 			/* Timed out. */
-			printk (KERN_DEBUG "DMA write timed out\n");
+			printk(KERN_DEBUG "DMA write timed out\n");
 			break;
 		}
 		/* Is serviceIntr set? */
-		if (!(inb (ECONTROL (port)) & (1<<2))) {
+		if (!(inb(ECONTROL(port)) & (1<<2))) {
 			cond_resched();
 
 			goto false_alarm;
@@ -705,14 +713,15 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 
 		/* Anyone else waiting for the port? */
 		if (port->waithead) {
-			printk (KERN_DEBUG "Somebody wants the port\n");
+			printk(KERN_DEBUG "Somebody wants the port\n");
 			break;
 		}
 
 		/* update for possible DMA residue ! */
 		buf  -= count;
 		left += count;
-		if (dma_handle) dma_addr -= count;
+		if (dma_handle)
+			dma_addr -= count;
 	}
 
 	/* Maybe got here through break, so adjust for DMA residue! */
@@ -723,12 +732,12 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 	release_dma_lock(dmaflag);
 
 	/* Turn off DMA mode */
-	frob_econtrol (port, 1<<3, 0);
+	frob_econtrol(port, 1<<3, 0);
 
 	if (dma_handle)
 		dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
 
-dump_parport_state ("leave fifo_write_block_dma", port);
+	dump_parport_state("leave fifo_write_block_dma", port);
 	return length - left;
 }
 #endif
@@ -738,13 +747,13 @@ static inline size_t parport_pc_fifo_write_block(struct parport *port,
 {
 #ifdef HAS_DMA
 	if (port->dma != PARPORT_DMA_NONE)
-		return parport_pc_fifo_write_block_dma (port, buf, length);
+		return parport_pc_fifo_write_block_dma(port, buf, length);
 #endif
-	return parport_pc_fifo_write_block_pio (port, buf, length);
+	return parport_pc_fifo_write_block_pio(port, buf, length);
 }
 
 /* Parallel Port FIFO mode (ECP chipsets) */
-static size_t parport_pc_compat_write_block_pio (struct parport *port,
+static size_t parport_pc_compat_write_block_pio(struct parport *port,
 						 const void *buf, size_t length,
 						 int flags)
 {
@@ -756,14 +765,16 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port,
 	/* Special case: a timeout of zero means we cannot call schedule().
 	 * Also if O_NONBLOCK is set then use the default implementation. */
 	if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-		return parport_ieee1284_write_compat (port, buf,
+		return parport_ieee1284_write_compat(port, buf,
 						      length, flags);
 
 	/* Set up parallel port FIFO mode.*/
-	parport_pc_data_forward (port); /* Must be in PS2 mode */
-	parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
-	r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
-	if (r)  printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
+	parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+	r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
+	if (r)
+		printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
+								port->name);
 
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
 
@@ -775,40 +786,39 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port,
 	 * the FIFO is empty, so allow 4 seconds for each position
 	 * in the fifo.
 	 */
-        expire = jiffies + (priv->fifo_depth * HZ * 4);
+	expire = jiffies + (priv->fifo_depth * HZ * 4);
 	do {
 		/* Wait for the FIFO to empty */
-		r = change_mode (port, ECR_PS2);
-		if (r != -EBUSY) {
+		r = change_mode(port, ECR_PS2);
+		if (r != -EBUSY)
 			break;
-		}
-	} while (time_before (jiffies, expire));
+	} while (time_before(jiffies, expire));
 	if (r == -EBUSY) {
 
-		printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+		printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
 
 		/* Prevent further data transfer. */
-		frob_set_mode (port, ECR_TST);
+		frob_set_mode(port, ECR_TST);
 
 		/* Adjust for the contents of the FIFO. */
 		for (written -= priv->fifo_depth; ; written++) {
-			if (inb (ECONTROL (port)) & 0x2) {
+			if (inb(ECONTROL(port)) & 0x2) {
 				/* Full up. */
 				break;
 			}
-			outb (0, FIFO (port));
+			outb(0, FIFO(port));
 		}
 
 		/* Reset the FIFO and return to PS2 mode. */
-		frob_set_mode (port, ECR_PS2);
+		frob_set_mode(port, ECR_PS2);
 	}
 
-	r = parport_wait_peripheral (port,
+	r = parport_wait_peripheral(port,
 				     PARPORT_STATUS_BUSY,
 				     PARPORT_STATUS_BUSY);
 	if (r)
-		printk (KERN_DEBUG
-			"%s: BUSY timeout (%d) in compat_write_block_pio\n", 
+		printk(KERN_DEBUG
+			"%s: BUSY timeout (%d) in compat_write_block_pio\n",
 			port->name, r);
 
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
@@ -818,7 +828,7 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port,
 
 /* ECP */
 #ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_ecp_write_block_pio (struct parport *port,
+static size_t parport_pc_ecp_write_block_pio(struct parport *port,
 					      const void *buf, size_t length,
 					      int flags)
 {
@@ -830,36 +840,38 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port,
 	/* Special case: a timeout of zero means we cannot call schedule().
 	 * Also if O_NONBLOCK is set then use the default implementation. */
 	if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-		return parport_ieee1284_ecp_write_data (port, buf,
+		return parport_ieee1284_ecp_write_data(port, buf,
 							length, flags);
 
 	/* Switch to forward mode if necessary. */
 	if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
 		/* Event 47: Set nInit high. */
-		parport_frob_control (port,
+		parport_frob_control(port,
 				      PARPORT_CONTROL_INIT
 				      | PARPORT_CONTROL_AUTOFD,
 				      PARPORT_CONTROL_INIT
 				      | PARPORT_CONTROL_AUTOFD);
 
 		/* Event 49: PError goes high. */
-		r = parport_wait_peripheral (port,
+		r = parport_wait_peripheral(port,
 					     PARPORT_STATUS_PAPEROUT,
 					     PARPORT_STATUS_PAPEROUT);
 		if (r) {
-			printk (KERN_DEBUG "%s: PError timeout (%d) "
+			printk(KERN_DEBUG "%s: PError timeout (%d) "
 				"in ecp_write_block_pio\n", port->name, r);
 		}
 	}
 
 	/* Set up ECP parallel port mode.*/
-	parport_pc_data_forward (port); /* Must be in PS2 mode */
-	parport_pc_frob_control (port,
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
+	parport_pc_frob_control(port,
 				 PARPORT_CONTROL_STROBE |
 				 PARPORT_CONTROL_AUTOFD,
 				 0);
-	r = change_mode (port, ECR_ECP); /* ECP FIFO */
-	if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+	r = change_mode(port, ECR_ECP); /* ECP FIFO */
+	if (r)
+		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+								port->name);
 	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
 
 	/* Write the data to the FIFO. */
@@ -873,55 +885,54 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port,
 	expire = jiffies + (priv->fifo_depth * (HZ * 4));
 	do {
 		/* Wait for the FIFO to empty */
-		r = change_mode (port, ECR_PS2);
-		if (r != -EBUSY) {
+		r = change_mode(port, ECR_PS2);
+		if (r != -EBUSY)
 			break;
-		}
-	} while (time_before (jiffies, expire));
+	} while (time_before(jiffies, expire));
 	if (r == -EBUSY) {
 
-		printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+		printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
 
 		/* Prevent further data transfer. */
-		frob_set_mode (port, ECR_TST);
+		frob_set_mode(port, ECR_TST);
 
 		/* Adjust for the contents of the FIFO. */
 		for (written -= priv->fifo_depth; ; written++) {
-			if (inb (ECONTROL (port)) & 0x2) {
+			if (inb(ECONTROL(port)) & 0x2) {
 				/* Full up. */
 				break;
 			}
-			outb (0, FIFO (port));
+			outb(0, FIFO(port));
 		}
 
 		/* Reset the FIFO and return to PS2 mode. */
-		frob_set_mode (port, ECR_PS2);
+		frob_set_mode(port, ECR_PS2);
 
 		/* Host transfer recovery. */
-		parport_pc_data_reverse (port); /* Must be in PS2 mode */
-		udelay (5);
-		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
-		r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+		parport_pc_data_reverse(port); /* Must be in PS2 mode */
+		udelay(5);
+		parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+		r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
 		if (r)
-			printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
+			printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
 				"in ecp_write_block_pio\n", port->name, r);
 
-		parport_frob_control (port,
+		parport_frob_control(port,
 				      PARPORT_CONTROL_INIT,
 				      PARPORT_CONTROL_INIT);
-		r = parport_wait_peripheral (port,
+		r = parport_wait_peripheral(port,
 					     PARPORT_STATUS_PAPEROUT,
 					     PARPORT_STATUS_PAPEROUT);
-                if (r)
-                        printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
+		if (r)
+			printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
 				"in ecp_write_block_pio\n", port->name, r);
 	}
 
-	r = parport_wait_peripheral (port,
-				     PARPORT_STATUS_BUSY, 
+	r = parport_wait_peripheral(port,
+				     PARPORT_STATUS_BUSY,
 				     PARPORT_STATUS_BUSY);
-	if(r)
-		printk (KERN_DEBUG
+	if (r)
+		printk(KERN_DEBUG
 			"%s: BUSY timeout (%d) in ecp_write_block_pio\n",
 			port->name, r);
 
@@ -931,7 +942,7 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port,
 }
 
 #if 0
-static size_t parport_pc_ecp_read_block_pio (struct parport *port,
+static size_t parport_pc_ecp_read_block_pio(struct parport *port,
 					     void *buf, size_t length,
 					     int flags)
 {
@@ -944,13 +955,13 @@ static size_t parport_pc_ecp_read_block_pio (struct parport *port,
 	char *bufp = buf;
 
 	port = port->physport;
-DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
-dump_parport_state ("enter fcn", port);
+	DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+	dump_parport_state("enter fcn", port);
 
 	/* Special case: a timeout of zero means we cannot call schedule().
 	 * Also if O_NONBLOCK is set then use the default implementation. */
 	if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-		return parport_ieee1284_ecp_read_data (port, buf,
+		return parport_ieee1284_ecp_read_data(port, buf,
 						       length, flags);
 
 	if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
@@ -966,173 +977,178 @@ dump_parport_state ("enter fcn", port);
 	 * go through software emulation.  Otherwise we may have to throw
 	 * away data. */
 	if (length < fifofull)
-		return parport_ieee1284_ecp_read_data (port, buf,
+		return parport_ieee1284_ecp_read_data(port, buf,
 						       length, flags);
 
 	if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
 		/* change to reverse-idle phase (must be in forward-idle) */
 
 		/* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
-		parport_frob_control (port,
+		parport_frob_control(port,
 				      PARPORT_CONTROL_AUTOFD
 				      | PARPORT_CONTROL_STROBE,
 				      PARPORT_CONTROL_AUTOFD);
-		parport_pc_data_reverse (port); /* Must be in PS2 mode */
-		udelay (5);
+		parport_pc_data_reverse(port); /* Must be in PS2 mode */
+		udelay(5);
 		/* Event 39: Set nInit low to initiate bus reversal */
-		parport_frob_control (port,
+		parport_frob_control(port,
 				      PARPORT_CONTROL_INIT,
 				      0);
 		/* Event 40: Wait for  nAckReverse (PError) to go low */
-		r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
-                if (r) {
-                        printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+		r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
+		if (r) {
+			printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
 				"in ecp_read_block_pio\n", port->name, r);
 			return 0;
 		}
 	}
 
 	/* Set up ECP FIFO mode.*/
-/*	parport_pc_frob_control (port,
+/*	parport_pc_frob_control(port,
 				 PARPORT_CONTROL_STROBE |
 				 PARPORT_CONTROL_AUTOFD,
 				 PARPORT_CONTROL_AUTOFD); */
-	r = change_mode (port, ECR_ECP); /* ECP FIFO */
-	if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+	r = change_mode(port, ECR_ECP); /* ECP FIFO */
+	if (r)
+		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+								port->name);
 
 	port->ieee1284.phase = IEEE1284_PH_REV_DATA;
 
 	/* the first byte must be collected manually */
-dump_parport_state ("pre 43", port);
+	dump_parport_state("pre 43", port);
 	/* Event 43: Wait for nAck to go low */
-	r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+	r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
 	if (r) {
 		/* timed out while reading -- no data */
-		printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
+		printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
 		goto out_no_data;
 	}
 	/* read byte */
-	*bufp++ = inb (DATA (port));
+	*bufp++ = inb(DATA(port));
 	left--;
-dump_parport_state ("43-44", port);
+	dump_parport_state("43-44", port);
 	/* Event 44: nAutoFd (HostAck) goes high to acknowledge */
-	parport_pc_frob_control (port,
+	parport_pc_frob_control(port,
 				 PARPORT_CONTROL_AUTOFD,
 				 0);
-dump_parport_state ("pre 45", port);
+	dump_parport_state("pre 45", port);
 	/* Event 45: Wait for nAck to go high */
-/*	r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
-dump_parport_state ("post 45", port);
-r = 0;
+	/* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
+						PARPORT_STATUS_ACK); */
+	dump_parport_state("post 45", port);
+	r = 0;
 	if (r) {
 		/* timed out while waiting for peripheral to respond to ack */
-		printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+		printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
 
 		/* keep hold of the byte we've got already */
 		goto out_no_data;
 	}
 	/* Event 46: nAutoFd (HostAck) goes low to accept more data */
-	parport_pc_frob_control (port,
+	parport_pc_frob_control(port,
 				 PARPORT_CONTROL_AUTOFD,
 				 PARPORT_CONTROL_AUTOFD);
 
 
-dump_parport_state ("rev idle", port);
+	dump_parport_state("rev idle", port);
 	/* Do the transfer. */
 	while (left > fifofull) {
 		int ret;
 		unsigned long expire = jiffies + port->cad->timeout;
-		unsigned char ecrval = inb (ECONTROL (port));
+		unsigned char ecrval = inb(ECONTROL(port));
 
-		if (need_resched() && time_before (jiffies, expire))
+		if (need_resched() && time_before(jiffies, expire))
 			/* Can't yield the port. */
-			schedule ();
+			schedule();
 
 		/* At this point, the FIFO may already be full. In
-                 * that case ECP is already holding back the
-                 * peripheral (assuming proper design) with a delayed
-                 * handshake.  Work fast to avoid a peripheral
-                 * timeout.  */
+		 * that case ECP is already holding back the
+		 * peripheral (assuming proper design) with a delayed
+		 * handshake.  Work fast to avoid a peripheral
+		 * timeout.  */
 
 		if (ecrval & 0x01) {
 			/* FIFO is empty. Wait for interrupt. */
-dump_parport_state ("FIFO empty", port);
+			dump_parport_state("FIFO empty", port);
 
 			/* Anyone else waiting for the port? */
 			if (port->waithead) {
-				printk (KERN_DEBUG "Somebody wants the port\n");
+				printk(KERN_DEBUG "Somebody wants the port\n");
 				break;
 			}
 
 			/* Clear serviceIntr */
-			ECR_WRITE (port, ecrval & ~(1<<2));
-		false_alarm:
-dump_parport_state ("waiting", port);
-			ret = parport_wait_event (port, HZ);
-DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
+			ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+			dump_parport_state("waiting", port);
+			ret = parport_wait_event(port, HZ);
+			DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
+									ret);
 			if (ret < 0)
 				break;
 			ret = 0;
-			if (!time_before (jiffies, expire)) {
+			if (!time_before(jiffies, expire)) {
 				/* Timed out. */
-dump_parport_state ("timeout", port);
-				printk (KERN_DEBUG "PIO read timed out\n");
+				dump_parport_state("timeout", port);
+				printk(KERN_DEBUG "PIO read timed out\n");
 				break;
 			}
-			ecrval = inb (ECONTROL (port));
+			ecrval = inb(ECONTROL(port));
 			if (!(ecrval & (1<<2))) {
 				if (need_resched() &&
-				    time_before (jiffies, expire)) {
-					schedule ();
+				    time_before(jiffies, expire)) {
+					schedule();
 				}
 				goto false_alarm;
 			}
 
 			/* Depending on how the FIFO threshold was
-                         * set, how long interrupt service took, and
-                         * how fast the peripheral is, we might be
-                         * lucky and have a just filled FIFO. */
+			 * set, how long interrupt service took, and
+			 * how fast the peripheral is, we might be
+			 * lucky and have a just filled FIFO. */
 			continue;
 		}
 
 		if (ecrval & 0x02) {
 			/* FIFO is full. */
-dump_parport_state ("FIFO full", port);
-			insb (fifo, bufp, fifo_depth);
+			dump_parport_state("FIFO full", port);
+			insb(fifo, bufp, fifo_depth);
 			bufp += fifo_depth;
 			left -= fifo_depth;
 			continue;
 		}
 
-DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+		DPRINTK(KERN_DEBUG
+		  "*** ecp_read_block_pio: reading one byte from the FIFO\n");
 
 		/* FIFO not filled.  We will cycle this loop for a while
-                 * and either the peripheral will fill it faster,
-                 * tripping a fast empty with insb, or we empty it. */
-		*bufp++ = inb (fifo);
+		 * and either the peripheral will fill it faster,
+		 * tripping a fast empty with insb, or we empty it. */
+		*bufp++ = inb(fifo);
 		left--;
 	}
 
 	/* scoop up anything left in the FIFO */
-	while (left && !(inb (ECONTROL (port) & 0x01))) {
-		*bufp++ = inb (fifo);
+	while (left && !(inb(ECONTROL(port) & 0x01))) {
+		*bufp++ = inb(fifo);
 		left--;
 	}
 
 	port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-dump_parport_state ("rev idle2", port);
+	dump_parport_state("rev idle2", port);
 
 out_no_data:
 
 	/* Go to forward idle mode to shut the peripheral up (event 47). */
-	parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+	parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
 
 	/* event 49: PError goes high */
-	r = parport_wait_peripheral (port,
+	r = parport_wait_peripheral(port,
 				     PARPORT_STATUS_PAPEROUT,
 				     PARPORT_STATUS_PAPEROUT);
 	if (r) {
-		printk (KERN_DEBUG
+		printk(KERN_DEBUG
 			"%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
 			port->name, r);
 	}
@@ -1141,14 +1157,14 @@ out_no_data:
 
 	/* Finish up. */
 	{
-		int lost = get_fifo_residue (port);
+		int lost = get_fifo_residue(port);
 		if (lost)
 			/* Shouldn't happen with compliant peripherals. */
-			printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+			printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
 				port->name, lost);
 	}
 
-dump_parport_state ("fwd idle", port);
+	dump_parport_state("fwd idle", port);
 	return length - left;
 }
 #endif  /*  0  */
@@ -1164,8 +1180,7 @@ dump_parport_state ("fwd idle", port);
 
 /* GCC is not inlining extern inline function later overwriten to non-inline,
    so we use outlined_ variants here.  */
-static const struct parport_operations parport_pc_ops =
-{
+static const struct parport_operations parport_pc_ops = {
 	.write_data	= parport_pc_write_data,
 	.read_data	= parport_pc_read_data,
 
@@ -1202,88 +1217,107 @@ static const struct parport_operations parport_pc_ops =
 };
 
 #ifdef CONFIG_PARPORT_PC_SUPERIO
+
+static struct superio_struct *find_free_superio(void)
+{
+	int i;
+	for (i = 0; i < NR_SUPERIOS; i++)
+		if (superios[i].io == 0)
+			return &superios[i];
+	return NULL;
+}
+
+
 /* Super-IO chipset detection, Winbond, SMSC */
 static void __devinit show_parconfig_smsc37c669(int io, int key)
 {
-	int cr1,cr4,cra,cr23,cr26,cr27,i=0;
-	static const char *const modes[]={
+	int cr1, cr4, cra, cr23, cr26, cr27;
+	struct superio_struct *s;
+
+	static const char *const modes[] = {
 		"SPP and Bidirectional (PS/2)",
 		"EPP and SPP",
 		"ECP",
 		"ECP and EPP" };
 
-	outb(key,io);
-	outb(key,io);
-	outb(1,io);
-	cr1=inb(io+1);
-	outb(4,io);
-	cr4=inb(io+1);
-	outb(0x0a,io);
-	cra=inb(io+1);
-	outb(0x23,io);
-	cr23=inb(io+1);
-	outb(0x26,io);
-	cr26=inb(io+1);
-	outb(0x27,io);
-	cr27=inb(io+1);
-	outb(0xaa,io);
+	outb(key, io);
+	outb(key, io);
+	outb(1, io);
+	cr1 = inb(io + 1);
+	outb(4, io);
+	cr4 = inb(io + 1);
+	outb(0x0a, io);
+	cra = inb(io + 1);
+	outb(0x23, io);
+	cr23 = inb(io + 1);
+	outb(0x26, io);
+	cr26 = inb(io + 1);
+	outb(0x27, io);
+	cr27 = inb(io + 1);
+	outb(0xaa, io);
 
 	if (verbose_probing) {
-		printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+		printk(KERN_INFO
+			"SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
 			"A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
-			cr1,cr4,cra,cr23,cr26,cr27);
-		
+			cr1, cr4, cra, cr23, cr26, cr27);
+
 		/* The documentation calls DMA and IRQ-Lines by letters, so
 		   the board maker can/will wire them
 		   appropriately/randomly...  G=reserved H=IDE-irq, */
-		printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
-			"fifo threshold=%d\n", cr23*4,
-			(cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
-			(cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
+		printk(KERN_INFO
+	"SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+				cr23 * 4,
+				(cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+				(cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+				cra & 0x0f);
 		printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
-		       (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
-		printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
-		       (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], 
-		       (cr4 & 0x40) ? "1.7" : "1.9");
+		       (cr23 * 4 >= 0x100) ? "yes" : "no",
+		       (cr1 & 4) ? "yes" : "no");
+		printk(KERN_INFO
+			"SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+				(cr1 & 0x08) ? "Standard mode only (SPP)"
+					      : modes[cr4 & 0x03],
+				(cr4 & 0x40) ? "1.7" : "1.9");
 	}
-		
+
 	/* Heuristics !  BIOS setup for this mainboard device limits
 	   the choices to standard settings, i.e. io-address and IRQ
 	   are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
 	   DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
-	if(cr23*4 >=0x100) { /* if active */
-		while((superios[i].io!= 0) && (i<NR_SUPERIOS))
-			i++;
-		if(i==NR_SUPERIOS)
+	if (cr23 * 4 >= 0x100) { /* if active */
+		s = find_free_superio();
+		if (s == NULL)
 			printk(KERN_INFO "Super-IO: too many chips!\n");
 		else {
 			int d;
-			switch (cr23*4) {
-				case 0x3bc:
-					superios[i].io = 0x3bc;
-					superios[i].irq = 7;
-					break;
-				case 0x378:
-					superios[i].io = 0x378;
-					superios[i].irq = 7;
-					break;
-				case 0x278:
-					superios[i].io = 0x278;
-					superios[i].irq = 5;
+			switch (cr23 * 4) {
+			case 0x3bc:
+				s->io = 0x3bc;
+				s->irq = 7;
+				break;
+			case 0x378:
+				s->io = 0x378;
+				s->irq = 7;
+				break;
+			case 0x278:
+				s->io = 0x278;
+				s->irq = 5;
 			}
-			d=(cr26 &0x0f);
-			if((d==1) || (d==3)) 
-				superios[i].dma= d;
+			d = (cr26 & 0x0f);
+			if (d == 1 || d == 3)
+				s->dma = d;
 			else
-				superios[i].dma= PARPORT_DMA_NONE;
+				s->dma = PARPORT_DMA_NONE;
 		}
- 	}
+	}
 }
 
 
 static void __devinit show_parconfig_winbond(int io, int key)
 {
-	int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
+	int cr30, cr60, cr61, cr70, cr74, crf0;
+	struct superio_struct *s;
 	static const char *const modes[] = {
 		"Standard (SPP) and Bidirectional(PS/2)", /* 0 */
 		"EPP-1.9 and SPP",
@@ -1296,110 +1330,134 @@ static void __devinit show_parconfig_winbond(int io, int key)
 	static char *const irqtypes[] = {
 		"pulsed low, high-Z",
 		"follows nACK" };
-		
+
 	/* The registers are called compatible-PnP because the
-           register layout is modelled after ISA-PnP, the access
-           method is just another ... */
-	outb(key,io);
-	outb(key,io);
-	outb(0x07,io);   /* Register 7: Select Logical Device */
-	outb(0x01,io+1); /* LD1 is Parallel Port */
-	outb(0x30,io);
-	cr30=inb(io+1);
-	outb(0x60,io);
-	cr60=inb(io+1);
-	outb(0x61,io);
-	cr61=inb(io+1);
-	outb(0x70,io);
-	cr70=inb(io+1);
-	outb(0x74,io);
-	cr74=inb(io+1);
-	outb(0xf0,io);
-	crf0=inb(io+1);
-	outb(0xaa,io);
+	   register layout is modelled after ISA-PnP, the access
+	   method is just another ... */
+	outb(key, io);
+	outb(key, io);
+	outb(0x07, io);   /* Register 7: Select Logical Device */
+	outb(0x01, io + 1); /* LD1 is Parallel Port */
+	outb(0x30, io);
+	cr30 = inb(io + 1);
+	outb(0x60, io);
+	cr60 = inb(io + 1);
+	outb(0x61, io);
+	cr61 = inb(io + 1);
+	outb(0x70, io);
+	cr70 = inb(io + 1);
+	outb(0x74, io);
+	cr74 = inb(io + 1);
+	outb(0xf0, io);
+	crf0 = inb(io + 1);
+	outb(0xaa, io);
 
 	if (verbose_probing) {
-		printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
-		       "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
-		printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", 
-		       (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
+		printk(KERN_INFO
+    "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+					cr30, cr60, cr61, cr70, cr74, crf0);
+		printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+		       (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
 		if ((cr74 & 0x07) > 3)
 			printk("dma=none\n");
 		else
-			printk("dma=%d\n",cr74 & 0x07);
-		printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
-		       irqtypes[crf0>>7], (crf0>>3)&0x0f);
-		printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
+			printk("dma=%d\n", cr74 & 0x07);
+		printk(KERN_INFO
+		    "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+					irqtypes[crf0>>7], (crf0>>3)&0x0f);
+		printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
+					modes[crf0 & 0x07]);
 	}
 
-	if(cr30 & 0x01) { /* the settings can be interrogated later ... */
-		while((superios[i].io!= 0) && (i<NR_SUPERIOS))
-			i++;
-		if(i==NR_SUPERIOS) 
+	if (cr30 & 0x01) { /* the settings can be interrogated later ... */
+		s = find_free_superio();
+		if (s == NULL)
 			printk(KERN_INFO "Super-IO: too many chips!\n");
 		else {
-			superios[i].io = (cr60<<8)|cr61;
-			superios[i].irq = cr70&0x0f;
-			superios[i].dma = (((cr74 & 0x07) > 3) ?
+			s->io = (cr60 << 8) | cr61;
+			s->irq = cr70 & 0x0f;
+			s->dma = (((cr74 & 0x07) > 3) ?
 					   PARPORT_DMA_NONE : (cr74 & 0x07));
 		}
 	}
 }
 
-static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
+static void __devinit decode_winbond(int efer, int key, int devid,
+							int devrev, int oldid)
 {
 	const char *type = "unknown";
-	int id,progif=2;
+	int id, progif = 2;
 
 	if (devid == devrev)
 		/* simple heuristics, we happened to read some
-                   non-winbond register */
+		   non-winbond register */
 		return;
 
-	id=(devid<<8) | devrev;
+	id = (devid << 8) | devrev;
 
 	/* Values are from public data sheets pdf files, I can just
-           confirm 83977TF is correct :-) */
-	if      (id == 0x9771) type="83977F/AF";
-	else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
-	else if (id == 0x9774) type="83977ATF";
-	else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
-	else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
-	else if ((id & ~0x0f) == 0x5210) type="83627";
-	else if ((id & ~0x0f) == 0x6010) type="83697HF";
-	else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
-	else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
-	else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
-	else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
-	else progif=0;
+	   confirm 83977TF is correct :-) */
+	if (id == 0x9771)
+		type = "83977F/AF";
+	else if (id == 0x9773)
+		type = "83977TF / SMSC 97w33x/97w34x";
+	else if (id == 0x9774)
+		type = "83977ATF";
+	else if ((id & ~0x0f) == 0x5270)
+		type = "83977CTF / SMSC 97w36x";
+	else if ((id & ~0x0f) == 0x52f0)
+		type = "83977EF / SMSC 97w35x";
+	else if ((id & ~0x0f) == 0x5210)
+		type = "83627";
+	else if ((id & ~0x0f) == 0x6010)
+		type = "83697HF";
+	else if ((oldid & 0x0f) == 0x0a) {
+		type = "83877F";
+		progif = 1;
+	} else if ((oldid & 0x0f) == 0x0b) {
+		type = "83877AF";
+		progif = 1;
+	} else if ((oldid & 0x0f) == 0x0c) {
+		type = "83877TF";
+		progif = 1;
+	} else if ((oldid & 0x0f) == 0x0d) {
+		type = "83877ATF";
+		progif = 1;
+	} else
+		progif = 0;
 
 	if (verbose_probing)
 		printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
-		       "devid=%02x devrev=%02x oldid=%02x type=%s\n", 
+		       "devid=%02x devrev=%02x oldid=%02x type=%s\n",
 		       efer, key, devid, devrev, oldid, type);
 
 	if (progif == 2)
-		show_parconfig_winbond(efer,key);
+		show_parconfig_winbond(efer, key);
 }
 
 static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
 {
-        const char *type = "unknown";
+	const char *type = "unknown";
 	void (*func)(int io, int key);
-        int id;
+	int id;
 
-        if (devid == devrev)
+	if (devid == devrev)
 		/* simple heuristics, we happened to read some
-                   non-smsc register */
+		   non-smsc register */
 		return;
 
-	func=NULL;
-        id=(devid<<8) | devrev;
+	func = NULL;
+	id = (devid << 8) | devrev;
 
-	if	(id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
-	else if	(id==0x6582) type="37c665IR";
-	else if	(devid==0x65) type="37c665GT";
-	else if	(devid==0x66) type="37c666GT";
+	if (id == 0x0302) {
+		type = "37c669";
+		func = show_parconfig_smsc37c669;
+	} else if (id == 0x6582)
+		type = "37c665IR";
+	else if	(devid == 0x65)
+		type = "37c665GT";
+	else if	(devid == 0x66)
+		type = "37c666GT";
 
 	if (verbose_probing)
 		printk(KERN_INFO "SMSC chip at EFER=0x%x "
@@ -1407,138 +1465,138 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
 		       efer, key, devid, devrev, type);
 
 	if (func)
-		func(efer,key);
+		func(efer, key);
 }
 
 
 static void __devinit winbond_check(int io, int key)
 {
-	int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+	int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
 	/* First probe without key */
-	outb(0x20,io);
-	x_devid=inb(io+1);
-	outb(0x21,io);
-	x_devrev=inb(io+1);
-	outb(0x09,io);
-	x_oldid=inb(io+1);
-
-	outb(key,io);
-	outb(key,io);     /* Write Magic Sequence to EFER, extended
-                             funtion enable register */
-	outb(0x20,io);    /* Write EFIR, extended function index register */
-	devid=inb(io+1);  /* Read EFDR, extended function data register */
-	outb(0x21,io);
-	devrev=inb(io+1);
-	outb(0x09,io);
-	oldid=inb(io+1);
-	outb(0xaa,io);    /* Magic Seal */
+	outb(0x20, io);
+	x_devid = inb(io + 1);
+	outb(0x21, io);
+	x_devrev = inb(io + 1);
+	outb(0x09, io);
+	x_oldid = inb(io + 1);
+
+	outb(key, io);
+	outb(key, io);     /* Write Magic Sequence to EFER, extended
+			      funtion enable register */
+	outb(0x20, io);    /* Write EFIR, extended function index register */
+	devid = inb(io + 1);  /* Read EFDR, extended function data register */
+	outb(0x21, io);
+	devrev = inb(io + 1);
+	outb(0x09, io);
+	oldid = inb(io + 1);
+	outb(0xaa, io);    /* Magic Seal */
 
 	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
 		goto out; /* protection against false positives */
 
-	decode_winbond(io,key,devid,devrev,oldid);
+	decode_winbond(io, key, devid, devrev, oldid);
 out:
 	release_region(io, 3);
 }
 
-static void __devinit winbond_check2(int io,int key)
+static void __devinit winbond_check2(int io, int key)
 {
-        int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+	int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
 	/* First probe without the key */
-	outb(0x20,io+2);
-	x_devid=inb(io+2);
-	outb(0x21,io+1);
-	x_devrev=inb(io+2);
-	outb(0x09,io+1);
-	x_oldid=inb(io+2);
-
-        outb(key,io);     /* Write Magic Byte to EFER, extended
-                             funtion enable register */
-        outb(0x20,io+2);  /* Write EFIR, extended function index register */
-        devid=inb(io+2);  /* Read EFDR, extended function data register */
-        outb(0x21,io+1);
-        devrev=inb(io+2);
-        outb(0x09,io+1);
-        oldid=inb(io+2);
-        outb(0xaa,io);    /* Magic Seal */
-
-	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+	outb(0x20, io + 2);
+	x_devid = inb(io + 2);
+	outb(0x21, io + 1);
+	x_devrev = inb(io + 2);
+	outb(0x09, io + 1);
+	x_oldid = inb(io + 2);
+
+	outb(key, io);     /* Write Magic Byte to EFER, extended
+			      funtion enable register */
+	outb(0x20, io + 2);  /* Write EFIR, extended function index register */
+	devid = inb(io + 2);  /* Read EFDR, extended function data register */
+	outb(0x21, io + 1);
+	devrev = inb(io + 2);
+	outb(0x09, io + 1);
+	oldid = inb(io + 2);
+	outb(0xaa, io);    /* Magic Seal */
+
+	if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
 		goto out; /* protection against false positives */
 
-	decode_winbond(io,key,devid,devrev,oldid);
+	decode_winbond(io, key, devid, devrev, oldid);
 out:
 	release_region(io, 3);
 }
 
 static void __devinit smsc_check(int io, int key)
 {
-        int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
+	int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
 
 	if (!request_region(io, 3, __func__))
 		return;
 
 	/* First probe without the key */
-	outb(0x0d,io);
-	x_oldid=inb(io+1);
-	outb(0x0e,io);
-	x_oldrev=inb(io+1);
-	outb(0x20,io);
-	x_id=inb(io+1);
-	outb(0x21,io);
-	x_rev=inb(io+1);
-
-        outb(key,io);
-        outb(key,io);     /* Write Magic Sequence to EFER, extended
-                             funtion enable register */
-        outb(0x0d,io);    /* Write EFIR, extended function index register */
-        oldid=inb(io+1);  /* Read EFDR, extended function data register */
-        outb(0x0e,io);
-        oldrev=inb(io+1);
-	outb(0x20,io);
-	id=inb(io+1);
-	outb(0x21,io);
-	rev=inb(io+1);
-        outb(0xaa,io);    /* Magic Seal */
-
-	if ((x_id == id) && (x_oldrev == oldrev) &&
-	    (x_oldid == oldid) && (x_rev == rev))
+	outb(0x0d, io);
+	x_oldid = inb(io + 1);
+	outb(0x0e, io);
+	x_oldrev = inb(io + 1);
+	outb(0x20, io);
+	x_id = inb(io + 1);
+	outb(0x21, io);
+	x_rev = inb(io + 1);
+
+	outb(key, io);
+	outb(key, io);     /* Write Magic Sequence to EFER, extended
+			      funtion enable register */
+	outb(0x0d, io);    /* Write EFIR, extended function index register */
+	oldid = inb(io + 1);  /* Read EFDR, extended function data register */
+	outb(0x0e, io);
+	oldrev = inb(io + 1);
+	outb(0x20, io);
+	id = inb(io + 1);
+	outb(0x21, io);
+	rev = inb(io + 1);
+	outb(0xaa, io);    /* Magic Seal */
+
+	if (x_id == id && x_oldrev == oldrev &&
+	    x_oldid == oldid && x_rev == rev)
 		goto out; /* protection against false positives */
 
-        decode_smsc(io,key,oldid,oldrev);
+	decode_smsc(io, key, oldid, oldrev);
 out:
 	release_region(io, 3);
 }
 
 
-static void __devinit detect_and_report_winbond (void)
-{ 
+static void __devinit detect_and_report_winbond(void)
+{
 	if (verbose_probing)
 		printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
-	winbond_check(0x3f0,0x87);
-	winbond_check(0x370,0x87);
-	winbond_check(0x2e ,0x87);
-	winbond_check(0x4e ,0x87);
-	winbond_check(0x3f0,0x86);
-	winbond_check2(0x250,0x88); 
-	winbond_check2(0x250,0x89);
+	winbond_check(0x3f0, 0x87);
+	winbond_check(0x370, 0x87);
+	winbond_check(0x2e , 0x87);
+	winbond_check(0x4e , 0x87);
+	winbond_check(0x3f0, 0x86);
+	winbond_check2(0x250, 0x88);
+	winbond_check2(0x250, 0x89);
 }
 
-static void __devinit detect_and_report_smsc (void)
+static void __devinit detect_and_report_smsc(void)
 {
 	if (verbose_probing)
 		printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
-	smsc_check(0x3f0,0x55);
-	smsc_check(0x370,0x55);
-	smsc_check(0x3f0,0x44);
-	smsc_check(0x370,0x44);
+	smsc_check(0x3f0, 0x55);
+	smsc_check(0x370, 0x55);
+	smsc_check(0x3f0, 0x44);
+	smsc_check(0x370, 0x44);
 }
 
 static void __devinit detect_and_report_it87(void)
@@ -1573,34 +1631,39 @@ static void __devinit detect_and_report_it87(void)
 }
 #endif /* CONFIG_PARPORT_PC_SUPERIO */
 
-static int get_superio_dma (struct parport *p)
+static struct superio_struct *find_superio(struct parport *p)
 {
-	int i=0;
-	while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
-		i++;
-	if (i!=NR_SUPERIOS)
-		return superios[i].dma;
+	int i;
+	for (i = 0; i < NR_SUPERIOS; i++)
+		if (superios[i].io != p->base)
+			return &superios[i];
+	return NULL;
+}
+
+static int get_superio_dma(struct parport *p)
+{
+	struct superio_struct *s = find_superio(p);
+	if (s)
+		return s->dma;
 	return PARPORT_DMA_NONE;
 }
 
-static int get_superio_irq (struct parport *p)
+static int get_superio_irq(struct parport *p)
 {
-	int i=0;
-        while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
-                i++;
-        if (i!=NR_SUPERIOS)
-                return superios[i].irq;
-        return PARPORT_IRQ_NONE;
+	struct superio_struct *s = find_superio(p);
+	if (s)
+		return s->irq;
+	return PARPORT_IRQ_NONE;
 }
-	
+
 
 /* --- Mode detection ------------------------------------- */
 
 /*
  * Checks for port existence, all ports support SPP MODE
- * Returns: 
+ * Returns:
  *         0           :  No parallel port at this address
- *  PARPORT_MODE_PCSPP :  SPP port detected 
+ *  PARPORT_MODE_PCSPP :  SPP port detected
  *                        (if the user specified an ioport himself,
  *                         this shall always be the case!)
  *
@@ -1610,7 +1673,7 @@ static int parport_SPP_supported(struct parport *pb)
 	unsigned char r, w;
 
 	/*
-	 * first clear an eventually pending EPP timeout 
+	 * first clear an eventually pending EPP timeout
 	 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
 	 * that does not even respond to SPP cycles if an EPP
 	 * timeout is pending
@@ -1619,19 +1682,19 @@ static int parport_SPP_supported(struct parport *pb)
 
 	/* Do a simple read-write test to make sure the port exists. */
 	w = 0xc;
-	outb (w, CONTROL (pb));
+	outb(w, CONTROL(pb));
 
 	/* Is there a control register that we can read from?  Some
 	 * ports don't allow reads, so read_control just returns a
 	 * software copy. Some ports _do_ allow reads, so bypass the
 	 * software copy here.  In addition, some bits aren't
 	 * writable. */
-	r = inb (CONTROL (pb));
+	r = inb(CONTROL(pb));
 	if ((r & 0xf) == w) {
 		w = 0xe;
-		outb (w, CONTROL (pb));
-		r = inb (CONTROL (pb));
-		outb (0xc, CONTROL (pb));
+		outb(w, CONTROL(pb));
+		r = inb(CONTROL(pb));
+		outb(0xc, CONTROL(pb));
 		if ((r & 0xf) == w)
 			return PARPORT_MODE_PCSPP;
 	}
@@ -1639,18 +1702,18 @@ static int parport_SPP_supported(struct parport *pb)
 	if (user_specified)
 		/* That didn't work, but the user thinks there's a
 		 * port here. */
-		printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
+		printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
 			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
 
 	/* Try the data register.  The data lines aren't tri-stated at
 	 * this stage, so we expect back what we wrote. */
 	w = 0xaa;
-	parport_pc_write_data (pb, w);
-	r = parport_pc_read_data (pb);
+	parport_pc_write_data(pb, w);
+	r = parport_pc_read_data(pb);
 	if (r == w) {
 		w = 0x55;
-		parport_pc_write_data (pb, w);
-		r = parport_pc_read_data (pb);
+		parport_pc_write_data(pb, w);
+		r = parport_pc_read_data(pb);
 		if (r == w)
 			return PARPORT_MODE_PCSPP;
 	}
@@ -1658,9 +1721,9 @@ static int parport_SPP_supported(struct parport *pb)
 	if (user_specified) {
 		/* Didn't work, but the user is convinced this is the
 		 * place. */
-		printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
+		printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
 			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
-		printk (KERN_INFO "parport 0x%lx: You gave this address, "
+		printk(KERN_INFO "parport 0x%lx: You gave this address, "
 			"but there is probably no parallel port there!\n",
 			pb->base);
 	}
@@ -1691,33 +1754,33 @@ static int parport_ECR_present(struct parport *pb)
 	struct parport_pc_private *priv = pb->private_data;
 	unsigned char r = 0xc;
 
-	outb (r, CONTROL (pb));
-	if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
-		outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
+	outb(r, CONTROL(pb));
+	if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) {
+		outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */
 
-		r = inb (CONTROL (pb));
-		if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
+		r = inb(CONTROL(pb));
+		if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2))
 			goto no_reg; /* Sure that no ECR register exists */
 	}
-	
-	if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
+
+	if ((inb(ECONTROL(pb)) & 0x3) != 0x1)
 		goto no_reg;
 
-	ECR_WRITE (pb, 0x34);
-	if (inb (ECONTROL (pb)) != 0x35)
+	ECR_WRITE(pb, 0x34);
+	if (inb(ECONTROL(pb)) != 0x35)
 		goto no_reg;
 
 	priv->ecr = 1;
-	outb (0xc, CONTROL (pb));
-	
+	outb(0xc, CONTROL(pb));
+
 	/* Go to mode 000 */
-	frob_set_mode (pb, ECR_SPP);
+	frob_set_mode(pb, ECR_SPP);
 
 	return 1;
 
  no_reg:
-	outb (0xc, CONTROL (pb));
-	return 0; 
+	outb(0xc, CONTROL(pb));
+	return 0;
 }
 
 #ifdef CONFIG_PARPORT_1284
@@ -1727,7 +1790,7 @@ static int parport_ECR_present(struct parport *pb)
  * allows us to read data from the data lines.  In theory we would get back
  * 0xff but any peripheral attached to the port may drag some or all of the
  * lines down to zero.  So if we get back anything that isn't the contents
- * of the data register we deem PS/2 support to be present. 
+ * of the data register we deem PS/2 support to be present.
  *
  * Some SPP ports have "half PS/2" ability - you can't turn off the line
  * drivers, but an external peripheral with sufficiently beefy drivers of
@@ -1735,26 +1798,28 @@ static int parport_ECR_present(struct parport *pb)
  * where they can then be read back as normal.  Ports with this property
  * and the right type of device attached are likely to fail the SPP test,
  * (as they will appear to have stuck bits) and so the fact that they might
- * be misdetected here is rather academic. 
+ * be misdetected here is rather academic.
  */
 
 static int parport_PS2_supported(struct parport *pb)
 {
 	int ok = 0;
-  
+
 	clear_epp_timeout(pb);
 
 	/* try to tri-state the buffer */
-	parport_pc_data_reverse (pb);
-	
+	parport_pc_data_reverse(pb);
+
 	parport_pc_write_data(pb, 0x55);
-	if (parport_pc_read_data(pb) != 0x55) ok++;
+	if (parport_pc_read_data(pb) != 0x55)
+		ok++;
 
 	parport_pc_write_data(pb, 0xaa);
-	if (parport_pc_read_data(pb) != 0xaa) ok++;
+	if (parport_pc_read_data(pb) != 0xaa)
+		ok++;
 
 	/* cancel input mode */
-	parport_pc_data_forward (pb);
+	parport_pc_data_forward(pb);
 
 	if (ok) {
 		pb->modes |= PARPORT_MODE_TRISTATE;
@@ -1773,68 +1838,68 @@ static int parport_ECP_supported(struct parport *pb)
 	int config, configb;
 	int pword;
 	struct parport_pc_private *priv = pb->private_data;
-	/* Translate ECP intrLine to ISA irq value */	
-	static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 }; 
+	/* Translate ECP intrLine to ISA irq value */
+	static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 };
 
 	/* If there is no ECR, we have no hope of supporting ECP. */
 	if (!priv->ecr)
 		return 0;
 
 	/* Find out FIFO depth */
-	ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
-	ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
-	for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
-		outb (0xaa, FIFO (pb));
+	ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */
+	for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++)
+		outb(0xaa, FIFO(pb));
 
 	/*
 	 * Using LGS chipset it uses ECR register, but
 	 * it doesn't support ECP or FIFO MODE
 	 */
 	if (i == 1024) {
-		ECR_WRITE (pb, ECR_SPP << 5);
+		ECR_WRITE(pb, ECR_SPP << 5);
 		return 0;
 	}
 
 	priv->fifo_depth = i;
 	if (verbose_probing)
-		printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+		printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
 
 	/* Find out writeIntrThreshold */
-	frob_econtrol (pb, 1<<2, 1<<2);
-	frob_econtrol (pb, 1<<2, 0);
+	frob_econtrol(pb, 1<<2, 1<<2);
+	frob_econtrol(pb, 1<<2, 0);
 	for (i = 1; i <= priv->fifo_depth; i++) {
-		inb (FIFO (pb));
-		udelay (50);
-		if (inb (ECONTROL (pb)) & (1<<2))
+		inb(FIFO(pb));
+		udelay(50);
+		if (inb(ECONTROL(pb)) & (1<<2))
 			break;
 	}
 
 	if (i <= priv->fifo_depth) {
 		if (verbose_probing)
-			printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+			printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
 				pb->base, i);
 	} else
 		/* Number of bytes we know we can write if we get an
-                   interrupt. */
+		   interrupt. */
 		i = 0;
 
 	priv->writeIntrThreshold = i;
 
 	/* Find out readIntrThreshold */
-	frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
-	parport_pc_data_reverse (pb); /* Must be in PS2 mode */
-	frob_set_mode (pb, ECR_TST); /* Test FIFO */
-	frob_econtrol (pb, 1<<2, 1<<2);
-	frob_econtrol (pb, 1<<2, 0);
+	frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+	parport_pc_data_reverse(pb); /* Must be in PS2 mode */
+	frob_set_mode(pb, ECR_TST); /* Test FIFO */
+	frob_econtrol(pb, 1<<2, 1<<2);
+	frob_econtrol(pb, 1<<2, 0);
 	for (i = 1; i <= priv->fifo_depth; i++) {
-		outb (0xaa, FIFO (pb));
-		if (inb (ECONTROL (pb)) & (1<<2))
+		outb(0xaa, FIFO(pb));
+		if (inb(ECONTROL(pb)) & (1<<2))
 			break;
 	}
 
 	if (i <= priv->fifo_depth) {
 		if (verbose_probing)
-			printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+			printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
 				pb->base, i);
 	} else
 		/* Number of bytes we can read if we get an interrupt. */
@@ -1842,23 +1907,23 @@ static int parport_ECP_supported(struct parport *pb)
 
 	priv->readIntrThreshold = i;
 
-	ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
-	ECR_WRITE (pb, 0xf4); /* Configuration mode */
-	config = inb (CONFIGA (pb));
+	ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE(pb, 0xf4); /* Configuration mode */
+	config = inb(CONFIGA(pb));
 	pword = (config >> 4) & 0x7;
 	switch (pword) {
 	case 0:
 		pword = 2;
-		printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+		printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
 			pb->base);
 		break;
 	case 2:
 		pword = 4;
-		printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+		printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
 			pb->base);
 		break;
 	default:
-		printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
+		printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
 			pb->base);
 		/* Assume 1 */
 	case 1:
@@ -1867,28 +1932,29 @@ static int parport_ECP_supported(struct parport *pb)
 	priv->pword = pword;
 
 	if (verbose_probing) {
-		printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
-		
-		printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+		printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
+			pb->base, 8 * pword);
+
+		printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
 			config & 0x80 ? "Level" : "Pulses");
 
-		configb = inb (CONFIGB (pb));
-		printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+		configb = inb(CONFIGB(pb));
+		printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
 			pb->base, config, configb);
-		printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
-		if ((configb >>3) & 0x07)
-			printk("%d",intrline[(configb >>3) & 0x07]);
+		printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+		if ((configb >> 3) & 0x07)
+			printk("%d", intrline[(configb >> 3) & 0x07]);
 		else
 			printk("<none or set by other means>");
-		printk (" dma=");
-		if( (configb & 0x03 ) == 0x00)
+		printk(" dma=");
+		if ((configb & 0x03) == 0x00)
 			printk("<none or set by other means>\n");
 		else
-			printk("%d\n",configb & 0x07);
+			printk("%d\n", configb & 0x07);
 	}
 
 	/* Go back to mode 000 */
-	frob_set_mode (pb, ECR_SPP);
+	frob_set_mode(pb, ECR_SPP);
 
 	return 1;
 }
@@ -1903,10 +1969,10 @@ static int parport_ECPPS2_supported(struct parport *pb)
 	if (!priv->ecr)
 		return 0;
 
-	oecr = inb (ECONTROL (pb));
-	ECR_WRITE (pb, ECR_PS2 << 5);
+	oecr = inb(ECONTROL(pb));
+	ECR_WRITE(pb, ECR_PS2 << 5);
 	result = parport_PS2_supported(pb);
-	ECR_WRITE (pb, oecr);
+	ECR_WRITE(pb, oecr);
 	return result;
 }
 
@@ -1930,16 +1996,15 @@ static int parport_EPP_supported(struct parport *pb)
 	 */
 
 	/* If EPP timeout bit clear then EPP available */
-	if (!clear_epp_timeout(pb)) {
+	if (!clear_epp_timeout(pb))
 		return 0;  /* No way to clear timeout */
-	}
 
 	/* Check for Intel bug. */
 	if (priv->ecr) {
 		unsigned char i;
 		for (i = 0x00; i < 0x80; i += 0x20) {
-			ECR_WRITE (pb, i);
-			if (clear_epp_timeout (pb)) {
+			ECR_WRITE(pb, i);
+			if (clear_epp_timeout(pb)) {
 				/* Phony EPP in ECP. */
 				return 0;
 			}
@@ -1963,17 +2028,16 @@ static int parport_ECPEPP_supported(struct parport *pb)
 	int result;
 	unsigned char oecr;
 
-	if (!priv->ecr) {
+	if (!priv->ecr)
 		return 0;
-	}
 
-	oecr = inb (ECONTROL (pb));
+	oecr = inb(ECONTROL(pb));
 	/* Search for SMC style EPP+ECP mode */
-	ECR_WRITE (pb, 0x80);
-	outb (0x04, CONTROL (pb));
+	ECR_WRITE(pb, 0x80);
+	outb(0x04, CONTROL(pb));
 	result = parport_EPP_supported(pb);
 
-	ECR_WRITE (pb, oecr);
+	ECR_WRITE(pb, oecr);
 
 	if (result) {
 		/* Set up access functions to use ECP+EPP hardware. */
@@ -1991,11 +2055,25 @@ static int parport_ECPEPP_supported(struct parport *pb)
 /* Don't bother probing for modes we know we won't use. */
 static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
 #ifdef CONFIG_PARPORT_PC_FIFO
-static int parport_ECP_supported(struct parport *pb) { return 0; }
+static int parport_ECP_supported(struct parport *pb)
+{
+	return 0;
+}
 #endif
-static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
-static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
-static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+	return 0;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+	return 0;
+}
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+	return 0;
+}
 
 #endif /* No IEEE 1284 support */
 
@@ -2005,17 +2083,17 @@ static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
 static int programmable_irq_support(struct parport *pb)
 {
 	int irq, intrLine;
-	unsigned char oecr = inb (ECONTROL (pb));
+	unsigned char oecr = inb(ECONTROL(pb));
 	static const int lookup[8] = {
 		PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
 	};
 
-	ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
+	ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */
 
-	intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+	intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07;
 	irq = lookup[intrLine];
 
-	ECR_WRITE (pb, oecr);
+	ECR_WRITE(pb, oecr);
 	return irq;
 }
 
@@ -2025,17 +2103,17 @@ static int irq_probe_ECP(struct parport *pb)
 	unsigned long irqs;
 
 	irqs = probe_irq_on();
-		
-	ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
-	ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
-	ECR_WRITE (pb, ECR_TST << 5);
+
+	ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE(pb, (ECR_TST << 5) | 0x04);
+	ECR_WRITE(pb, ECR_TST << 5);
 
 	/* If Full FIFO sure that writeIntrThreshold is generated */
-	for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++) 
-		outb (0xaa, FIFO (pb));
-		
+	for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++)
+		outb(0xaa, FIFO(pb));
+
 	pb->irq = probe_irq_off(irqs);
-	ECR_WRITE (pb, ECR_SPP << 5);
+	ECR_WRITE(pb, ECR_SPP << 5);
 
 	if (pb->irq <= 0)
 		pb->irq = PARPORT_IRQ_NONE;
@@ -2045,7 +2123,7 @@ static int irq_probe_ECP(struct parport *pb)
 
 /*
  * This detection seems that only works in National Semiconductors
- * This doesn't work in SMC, LGS, and Winbond 
+ * This doesn't work in SMC, LGS, and Winbond
  */
 static int irq_probe_EPP(struct parport *pb)
 {
@@ -2056,16 +2134,16 @@ static int irq_probe_EPP(struct parport *pb)
 	unsigned char oecr;
 
 	if (pb->modes & PARPORT_MODE_PCECR)
-		oecr = inb (ECONTROL (pb));
+		oecr = inb(ECONTROL(pb));
 
 	irqs = probe_irq_on();
 
 	if (pb->modes & PARPORT_MODE_PCECR)
-		frob_econtrol (pb, 0x10, 0x10);
-	
+		frob_econtrol(pb, 0x10, 0x10);
+
 	clear_epp_timeout(pb);
-	parport_pc_frob_control (pb, 0x20, 0x20);
-	parport_pc_frob_control (pb, 0x10, 0x10);
+	parport_pc_frob_control(pb, 0x20, 0x20);
+	parport_pc_frob_control(pb, 0x10, 0x10);
 	clear_epp_timeout(pb);
 
 	/* Device isn't expecting an EPP read
@@ -2074,9 +2152,9 @@ static int irq_probe_EPP(struct parport *pb)
 	parport_pc_read_epp(pb);
 	udelay(20);
 
-	pb->irq = probe_irq_off (irqs);
+	pb->irq = probe_irq_off(irqs);
 	if (pb->modes & PARPORT_MODE_PCECR)
-		ECR_WRITE (pb, oecr);
+		ECR_WRITE(pb, oecr);
 	parport_pc_write_control(pb, 0xc);
 
 	if (pb->irq <= 0)
@@ -2133,28 +2211,28 @@ static int parport_irq_probe(struct parport *pb)
 /* --- DMA detection -------------------------------------- */
 
 /* Only if chipset conforms to ECP ISA Interface Standard */
-static int programmable_dma_support (struct parport *p)
+static int programmable_dma_support(struct parport *p)
 {
-	unsigned char oecr = inb (ECONTROL (p));
+	unsigned char oecr = inb(ECONTROL(p));
 	int dma;
 
-	frob_set_mode (p, ECR_CNF);
-	
-	dma = inb (CONFIGB(p)) & 0x07;
+	frob_set_mode(p, ECR_CNF);
+
+	dma = inb(CONFIGB(p)) & 0x07;
 	/* 000: Indicates jumpered 8-bit DMA if read-only.
 	   100: Indicates jumpered 16-bit DMA if read-only. */
 	if ((dma & 0x03) == 0)
 		dma = PARPORT_DMA_NONE;
 
-	ECR_WRITE (p, oecr);
+	ECR_WRITE(p, oecr);
 	return dma;
 }
 
-static int parport_dma_probe (struct parport *p)
+static int parport_dma_probe(struct parport *p)
 {
 	const struct parport_pc_private *priv = p->private_data;
-	if (priv->ecr)
-		p->dma = programmable_dma_support(p); /* ask ECP chipset first */
+	if (priv->ecr)		/* ask ECP chipset first */
+		p->dma = programmable_dma_support(p);
 	if (p->dma == PARPORT_DMA_NONE) {
 		/* ask known Super-IO chips proper, although these
 		   claim ECP compatible, some don't report their DMA
@@ -2212,7 +2290,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	if (!base_res)
 		goto out4;
 
-	memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
+	memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations));
 	priv->ctr = 0xc;
 	priv->ctr_writable = ~0x10;
 	priv->ecr = 0;
@@ -2239,7 +2317,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 			if (!parport_EPP_supported(p))
 				parport_ECPEPP_supported(p);
 	}
-	if (!parport_SPP_supported (p))
+	if (!parport_SPP_supported(p))
 		/* No port. */
 		goto out5;
 	if (priv->ecr)
@@ -2247,7 +2325,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	else
 		parport_PS2_supported(p);
 
-	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+	p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
 
 	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
 	if (p->base_hi && priv->ecr)
@@ -2271,7 +2349,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		}
 	}
 	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
-                                           is mandatory (see above) */
+					   is mandatory (see above) */
 		p->dma = PARPORT_DMA_NONE;
 
 #ifdef CONFIG_PARPORT_PC_FIFO
@@ -2288,16 +2366,23 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		if (p->dma != PARPORT_DMA_NONE) {
 			printk(", dma %d", p->dma);
 			p->modes |= PARPORT_MODE_DMA;
-		}
-		else printk(", using FIFO");
-	}
-	else
+		} else
+			printk(", using FIFO");
+	} else
 		/* We can't use the DMA channel after all. */
 		p->dma = PARPORT_DMA_NONE;
 #endif /* Allowed to use FIFO/DMA */
 
 	printk(" [");
-#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+
+#define printmode(x) \
+	{\
+		if (p->modes & PARPORT_MODE_##x) {\
+			printk("%s%s", f ? "," : "", #x);\
+			f++;\
+		} \
+	}
+
 	{
 		int f = 0;
 		printmode(PCSPP);
@@ -2309,10 +2394,10 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	}
 #undef printmode
 #ifndef CONFIG_PARPORT_1284
-	printk ("(,...)");
+	printk("(,...)");
 #endif /* CONFIG_PARPORT_1284 */
 	printk("]\n");
-	if (probedirq != PARPORT_IRQ_NONE) 
+	if (probedirq != PARPORT_IRQ_NONE)
 		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
 
 	/* If No ECP release the ports grabbed above. */
@@ -2328,7 +2413,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	if (p->irq != PARPORT_IRQ_NONE) {
 		if (request_irq(p->irq, parport_irq_handler,
 				 irqflags, p->name, p)) {
-			printk (KERN_WARNING "%s: irq %d in use, "
+			printk(KERN_WARNING "%s: irq %d in use, "
 				"resorting to polled operation\n",
 				p->name, p->irq);
 			p->irq = PARPORT_IRQ_NONE;
@@ -2338,8 +2423,8 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 #ifdef CONFIG_PARPORT_PC_FIFO
 #ifdef HAS_DMA
 		if (p->dma != PARPORT_DMA_NONE) {
-			if (request_dma (p->dma, p->name)) {
-				printk (KERN_WARNING "%s: dma %d in use, "
+			if (request_dma(p->dma, p->name)) {
+				printk(KERN_WARNING "%s: dma %d in use, "
 					"resorting to PIO operation\n",
 					p->name, p->dma);
 				p->dma = PARPORT_DMA_NONE;
@@ -2349,8 +2434,8 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 						       PAGE_SIZE,
 						       &priv->dma_handle,
 						       GFP_KERNEL);
-				if (! priv->dma_buf) {
-					printk (KERN_WARNING "%s: "
+				if (!priv->dma_buf) {
+					printk(KERN_WARNING "%s: "
 						"cannot get buffer for DMA, "
 						"resorting to PIO operation\n",
 						p->name);
@@ -2369,10 +2454,10 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		 * Put the ECP detected port in PS2 mode.
 		 * Do this also for ports that have ECR but don't do ECP.
 		 */
-		ECR_WRITE (p, 0x34);
+		ECR_WRITE(p, 0x34);
 
 	parport_pc_write_data(p, 0);
-	parport_pc_data_forward (p);
+	parport_pc_data_forward(p);
 
 	/* Now that we've told the sharing engine about the port, and
 	   found out its characteristics, let the high-level drivers
@@ -2380,7 +2465,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	spin_lock(&ports_lock);
 	list_add(&priv->list, &ports_list);
 	spin_unlock(&ports_lock);
-	parport_announce_port (p);
+	parport_announce_port(p);
 
 	return p;
 
@@ -2393,18 +2478,17 @@ out5:
 out4:
 	parport_put_port(p);
 out3:
-	kfree (priv);
+	kfree(priv);
 out2:
-	kfree (ops);
+	kfree(ops);
 out1:
 	if (pdev)
 		platform_device_unregister(pdev);
 	return NULL;
 }
+EXPORT_SYMBOL(parport_pc_probe_port);
 
-EXPORT_SYMBOL (parport_pc_probe_port);
-
-void parport_pc_unregister_port (struct parport *p)
+void parport_pc_unregister_port(struct parport *p)
 {
 	struct parport_pc_private *priv = p->private_data;
 	struct parport_operations *ops = p->ops;
@@ -2430,17 +2514,16 @@ void parport_pc_unregister_port (struct parport *p)
 				    priv->dma_buf,
 				    priv->dma_handle);
 #endif
-	kfree (p->private_data);
+	kfree(p->private_data);
 	parport_put_port(p);
-	kfree (ops); /* hope no-one cached it */
+	kfree(ops); /* hope no-one cached it */
 }
-
-EXPORT_SYMBOL (parport_pc_unregister_port);
+EXPORT_SYMBOL(parport_pc_unregister_port);
 
 #ifdef CONFIG_PCI
 
 /* ITE support maintained by Rich Liu <richliu@poorman.org> */
-static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 					 int autodma,
 					 const struct parport_pc_via_data *via)
 {
@@ -2452,73 +2535,74 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
 	int irq;
 	int i;
 
-	DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
-	
-	// make sure which one chip
-	for(i = 0; i < 5; i++) {
+	DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+
+	/* make sure which one chip */
+	for (i = 0; i < 5; i++) {
 		base_res = request_region(inta_addr[i], 32, "it887x");
 		if (base_res) {
 			int test;
-			pci_write_config_dword (pdev, 0x60,
+			pci_write_config_dword(pdev, 0x60,
 						0xe5000000 | inta_addr[i]);
-			pci_write_config_dword (pdev, 0x78,
+			pci_write_config_dword(pdev, 0x78,
 						0x00000000 | inta_addr[i]);
-			test = inb (inta_addr[i]);
-			if (test != 0xff) break;
+			test = inb(inta_addr[i]);
+			if (test != 0xff)
+				break;
 			release_region(inta_addr[i], 0x8);
 		}
 	}
-	if(i >= 5) {
-		printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+	if (i >= 5) {
+		printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
 		return 0;
 	}
 
-	type = inb (inta_addr[i] + 0x18);
+	type = inb(inta_addr[i] + 0x18);
 	type &= 0x0f;
 
 	switch (type) {
 	case 0x2:
-		printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+		printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
 		ite8872set = 0x64200000;
 		break;
 	case 0xa:
-		printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+		printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
 		ite8872set = 0x64200000;
 		break;
 	case 0xe:
-		printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+		printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
 		ite8872set = 0x64e00000;
 		break;
 	case 0x6:
-		printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+		printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
 		return 0;
 	case 0x8:
-		DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+		DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
 		return 0;
 	default:
-		printk (KERN_INFO "parport_pc: unknown ITE887x\n");
-		printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+		printk(KERN_INFO "parport_pc: unknown ITE887x\n");
+		printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
 			"output to Rich.Liu@ite.com.tw\n");
 		return 0;
 	}
 
-	pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
-	pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
+	pci_read_config_byte(pdev, 0x3c, &ite8872_irq);
+	pci_read_config_dword(pdev, 0x1c, &ite8872_lpt);
 	ite8872_lpt &= 0x0000ff00;
-	pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
+	pci_read_config_dword(pdev, 0x20, &ite8872_lpthi);
 	ite8872_lpthi &= 0x0000ff00;
-	pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
-	pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
-	pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
-	// SET SPP&EPP , Parallel Port NO DMA , Enable All Function
-	// SET Parallel IRQ
-	pci_write_config_dword (pdev, 0x9c,
+	pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+	pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+	pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+	/* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */
+	/* SET Parallel IRQ */
+	pci_write_config_dword(pdev, 0x9c,
 				ite8872set | (ite8872_irq * 0x11111));
 
-	DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
-	DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+	DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
 		 ite8872_lpt);
-	DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
 		 ite8872_lpthi);
 
 	/* Let the user (or defaults) steer us away from interrupts */
@@ -2530,14 +2614,14 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
 	 * Release the resource so that parport_pc_probe_port can get it.
 	 */
 	release_resource(base_res);
-	if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
+	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
 				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
-		printk (KERN_INFO
+		printk(KERN_INFO
 			"parport_pc: ITE 8872 parallel port: io=0x%X",
-			ite8872_lpt);
+								ite8872_lpt);
 		if (irq != PARPORT_IRQ_NONE)
-			printk (", irq=%d", irq);
-		printk ("\n");
+			printk(", irq=%d", irq);
+		printk("\n");
 		return 1;
 	}
 
@@ -2546,7 +2630,7 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
 
 /* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
    based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinitdata parport_init_mode = 0;
+static int __devinitdata parport_init_mode;
 
 /* Data for two known VIA chips */
 static struct parport_pc_via_data via_686a_data __devinitdata = {
@@ -2568,7 +2652,7 @@ static struct parport_pc_via_data via_8231_data __devinitdata = {
 	0xF6
 };
 
-static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
 				    int autodma,
 				    const struct parport_pc_via_data *via)
 {
@@ -2580,38 +2664,38 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 
 	printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
 
-	switch(parport_init_mode)
-	{
+	switch (parport_init_mode) {
 	case 1:
-	    printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
-	    siofunc = VIA_FUNCTION_PARPORT_SPP;
-	    break;
+		printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_SPP;
+		break;
 	case 2:
-	    printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
-	    siofunc = VIA_FUNCTION_PARPORT_SPP;
-	    ppcontrol = VIA_PARPORT_BIDIR;
-	    break;
+		printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_SPP;
+		ppcontrol = VIA_PARPORT_BIDIR;
+		break;
 	case 3:
-	    printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
-	    siofunc = VIA_FUNCTION_PARPORT_EPP;
-	    ppcontrol = VIA_PARPORT_BIDIR;
-	    have_epp = 1;
-	    break;
+		printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_EPP;
+		ppcontrol = VIA_PARPORT_BIDIR;
+		have_epp = 1;
+		break;
 	case 4:
-	    printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
-	    siofunc = VIA_FUNCTION_PARPORT_ECP;
-	    ppcontrol = VIA_PARPORT_BIDIR;
-	    break;
+		printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_ECP;
+		ppcontrol = VIA_PARPORT_BIDIR;
+		break;
 	case 5:
-	    printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
-	    siofunc = VIA_FUNCTION_PARPORT_ECP;
-	    ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
-	    have_epp = 1;
-	    break;
-	 default:
-	    printk(KERN_DEBUG "parport_pc: probing current configuration\n");
-	    siofunc = VIA_FUNCTION_PROBE;
-	    break;
+		printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_ECP;
+		ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+		have_epp = 1;
+		break;
+	default:
+		printk(KERN_DEBUG
+			"parport_pc: probing current configuration\n");
+		siofunc = VIA_FUNCTION_PROBE;
+		break;
 	}
 	/*
 	 * unlock super i/o configuration
@@ -2622,38 +2706,36 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 
 	/* Bits 1-0: Parallel Port Mode / Enable */
 	outb(via->viacfg_function, VIA_CONFIG_INDEX);
-	tmp = inb (VIA_CONFIG_DATA);
+	tmp = inb(VIA_CONFIG_DATA);
 	/* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
 	outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
-	tmp2 = inb (VIA_CONFIG_DATA);
-	if (siofunc == VIA_FUNCTION_PROBE)
-	{
-	    siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
-	    ppcontrol = tmp2;
+	tmp2 = inb(VIA_CONFIG_DATA);
+	if (siofunc == VIA_FUNCTION_PROBE) {
+		siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+		ppcontrol = tmp2;
+	} else {
+		tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+		tmp |= siofunc;
+		outb(via->viacfg_function, VIA_CONFIG_INDEX);
+		outb(tmp, VIA_CONFIG_DATA);
+		tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+		tmp2 |= ppcontrol;
+		outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+		outb(tmp2, VIA_CONFIG_DATA);
 	}
-	else
-	{
-	    tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
-	    tmp |= siofunc;
-	    outb(via->viacfg_function, VIA_CONFIG_INDEX);
-	    outb(tmp, VIA_CONFIG_DATA);
-	    tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
-	    tmp2 |= ppcontrol;
-	    outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
-	    outb(tmp2, VIA_CONFIG_DATA);
-	}
-	
+
 	/* Parallel Port I/O Base Address, bits 9-2 */
 	outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
 	port1 = inb(VIA_CONFIG_DATA) << 2;
-	
-	printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
-	if ((port1 == 0x3BC) && have_epp)
-	{
-	    outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
-	    outb((0x378 >> 2), VIA_CONFIG_DATA);
-	    printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
-	    port1 = 0x378;
+
+	printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
+									port1);
+	if (port1 == 0x3BC && have_epp) {
+		outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+		outb((0x378 >> 2), VIA_CONFIG_DATA);
+		printk(KERN_DEBUG
+			"parport_pc: Parallel port base changed to 0x378\n");
+		port1 = 0x378;
 	}
 
 	/*
@@ -2667,36 +2749,39 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 		printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
 		return 0;
 	}
-	
+
 	/* Bits 7-4: PnP Routing for Parallel Port IRQ */
 	pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
 	irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
 
-	if (siofunc == VIA_FUNCTION_PARPORT_ECP)
-	{
-	    /* Bits 3-2: PnP Routing for Parallel Port DMA */
-	    pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
-	    dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
-	}
-	else
-	    /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
-	    dma = PARPORT_DMA_NONE;
+	if (siofunc == VIA_FUNCTION_PARPORT_ECP) {
+		/* Bits 3-2: PnP Routing for Parallel Port DMA */
+		pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+		dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+	} else
+		/* if ECP not enabled, DMA is not enabled, assumed
+		   bogus 'dma' value */
+		dma = PARPORT_DMA_NONE;
 
 	/* Let the user (or defaults) steer us away from interrupts and DMA */
 	if (autoirq == PARPORT_IRQ_NONE) {
-	    irq = PARPORT_IRQ_NONE;
-	    dma = PARPORT_DMA_NONE;
+		irq = PARPORT_IRQ_NONE;
+		dma = PARPORT_DMA_NONE;
 	}
 	if (autodma == PARPORT_DMA_NONE)
-	    dma = PARPORT_DMA_NONE;
+		dma = PARPORT_DMA_NONE;
 
 	switch (port1) {
-	case 0x3bc: port2 = 0x7bc; break;
-	case 0x378: port2 = 0x778; break;
-	case 0x278: port2 = 0x678; break;
+	case 0x3bc:
+		port2 = 0x7bc; break;
+	case 0x378:
+		port2 = 0x778; break;
+	case 0x278:
+		port2 = 0x678; break;
 	default:
-		printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
-			port1);
+		printk(KERN_INFO
+			"parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+									port1);
 		return 0;
 	}
 
@@ -2714,17 +2799,17 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 	}
 
 	/* finally, do the probe with values obtained */
-	if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev, 0)) {
-		printk (KERN_INFO
+	if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
+		printk(KERN_INFO
 			"parport_pc: VIA parallel port: io=0x%X", port1);
 		if (irq != PARPORT_IRQ_NONE)
-			printk (", irq=%d", irq);
+			printk(", irq=%d", irq);
 		if (dma != PARPORT_DMA_NONE)
-			printk (", dma=%d", dma);
-		printk ("\n");
+			printk(", dma=%d", dma);
+		printk("\n");
 		return 1;
 	}
-	
+
 	printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
 		port1, irq, dma);
 	return 0;
@@ -2732,8 +2817,8 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 
 
 enum parport_pc_sio_types {
-	sio_via_686a = 0,	/* Via VT82C686A motherboard Super I/O */
-	sio_via_8231,		/* Via VT8231 south bridge integrated Super IO */
+	sio_via_686a = 0,   /* Via VT82C686A motherboard Super I/O */
+	sio_via_8231,	    /* Via VT8231 south bridge integrated Super IO */
 	sio_ite_8872,
 	last_sio
 };
@@ -2804,15 +2889,15 @@ enum parport_pc_pci_cards {
 };
 
 
-/* each element directly indexed from enum list, above 
+/* each element directly indexed from enum list, above
  * (but offset by last_sio) */
 static struct parport_pc_pci {
 	int numports;
 	struct { /* BAR (base address registers) numbers in the config
-                    space header */
+		    space header */
 		int lo;
-		int hi; /* -1 if not there, >6 for offset-method (max
-                           BAR is 6) */
+		int hi;
+		/* -1 if not there, >6 for offset-method (max BAR is 6) */
 	} addr[4];
 
 	/* If set, this is called immediately after pci_enable_device.
@@ -2857,7 +2942,7 @@ static struct parport_pc_pci {
 	/* timedia_4018  */             { 2, { { 0, 1 }, { 2, 3 }, } },
 	/* timedia_9018a */             { 2, { { 0, 1 }, { 2, 3 }, } },
 					/* SYBA uses fixed offsets in
-                                           a 1K io window */
+					   a 1K io window */
 	/* syba_2p_epp AP138B */	{ 2, { { 0, 0x078 }, { 0, 0x178 }, } },
 	/* syba_1p_ecp W83787 */	{ 1, { { 0, 0x078 }, } },
 	/* titan_010l */		{ 1, { { 3, -1 }, } },
@@ -2873,11 +2958,14 @@ static struct parport_pc_pci {
 	/* oxsemi_pcie_pport */		{ 1, { { 0, 1 }, } },
 	/* aks_0100 */                  { 1, { { 0, -1 }, } },
 	/* mobility_pp */		{ 1, { { 0, 1 }, } },
-	/* netmos_9705 */               { 1, { { 0, -1 }, } }, /* untested */
-        /* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
-        /* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
-	/* netmos_9805 */               { 1, { { 0, -1 }, } }, /* untested */
-	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+
+	/* The netmos entries below are untested */
+	/* netmos_9705 */               { 1, { { 0, -1 }, } },
+	/* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} },
+	/* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} },
+	/* netmos_9805 */               { 1, { { 0, -1 }, } },
+	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
+
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
 };
 
@@ -2906,7 +2994,7 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-	  PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
+	  PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 },
 	/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
 	{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
 	{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
@@ -2940,7 +3028,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	{ 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
 	{ 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
 	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
-	{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
+	/* AFAVLAB_TK9902 */
+	{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
 	{ 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
 	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 },
@@ -2983,14 +3072,14 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
 	{ 0, } /* terminate list */
 };
-MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
+MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
 
 struct pci_parport_data {
 	int num;
 	struct parport *ports[2];
 };
 
-static int parport_pc_pci_probe (struct pci_dev *dev,
+static int parport_pc_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *id)
 {
 	int err, count, n, i = id->driver_data;
@@ -3003,7 +3092,8 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
 	/* This is a PCI card */
 	i -= last_sio;
 	count = 0;
-	if ((err = pci_enable_device (dev)) != 0)
+	err = pci_enable_device(dev);
+	if (err)
 		return err;
 
 	data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
@@ -3011,7 +3101,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
 		return -ENOMEM;
 
 	if (cards[i].preinit_hook &&
-	    cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+	    cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
 		kfree(data);
 		return -ENODEV;
 	}
@@ -3021,25 +3111,25 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
 		int hi = cards[i].addr[n].hi;
 		int irq;
 		unsigned long io_lo, io_hi;
-		io_lo = pci_resource_start (dev, lo);
+		io_lo = pci_resource_start(dev, lo);
 		io_hi = 0;
 		if ((hi >= 0) && (hi <= 6))
-			io_hi = pci_resource_start (dev, hi);
+			io_hi = pci_resource_start(dev, hi);
 		else if (hi > 6)
 			io_lo += hi; /* Reinterpret the meaning of
-                                        "hi" as an offset (see SYBA
-                                        def.) */
+					"hi" as an offset (see SYBA
+					def.) */
 		/* TODO: test if sharing interrupts works */
 		irq = dev->irq;
 		if (irq == IRQ_NONE) {
-			printk (KERN_DEBUG
+			printk(KERN_DEBUG
 	"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
 				parport_pc_pci_tbl[i + last_sio].vendor,
 				parport_pc_pci_tbl[i + last_sio].device,
 				io_lo, io_hi);
 			irq = PARPORT_IRQ_NONE;
 		} else {
-			printk (KERN_DEBUG
+			printk(KERN_DEBUG
 	"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
 				parport_pc_pci_tbl[i + last_sio].vendor,
 				parport_pc_pci_tbl[i + last_sio].device,
@@ -3056,7 +3146,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
 	data->num = count;
 
 	if (cards[i].postinit_hook)
-		cards[i].postinit_hook (dev, count == 0);
+		cards[i].postinit_hook(dev, count == 0);
 
 	if (count) {
 		pci_set_drvdata(dev, data);
@@ -3090,7 +3180,7 @@ static struct pci_driver parport_pc_pci_driver = {
 	.remove		= __devexit_p(parport_pc_pci_remove),
 };
 
-static int __init parport_pc_init_superio (int autoirq, int autodma)
+static int __init parport_pc_init_superio(int autoirq, int autodma)
 {
 	const struct pci_device_id *id;
 	struct pci_dev *pdev = NULL;
@@ -3101,8 +3191,9 @@ static int __init parport_pc_init_superio (int autoirq, int autodma)
 		if (id == NULL || id->driver_data >= last_sio)
 			continue;
 
-		if (parport_pc_superio_info[id->driver_data].probe
-			(pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
+		if (parport_pc_superio_info[id->driver_data].probe(
+			pdev, autoirq, autodma,
+			parport_pc_superio_info[id->driver_data].via)) {
 			ret++;
 		}
 	}
@@ -3111,7 +3202,10 @@ static int __init parport_pc_init_superio (int autoirq, int autodma)
 }
 #else
 static struct pci_driver parport_pc_pci_driver;
-static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
+static int __init parport_pc_init_superio(int autoirq, int autodma)
+{
+	return 0;
+}
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PNP
@@ -3124,44 +3218,45 @@ static const struct pnp_device_id parport_pc_pnp_tbl[] = {
 	{ }
 };
 
-MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl);
 
-static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+static int parport_pc_pnp_probe(struct pnp_dev *dev,
+						const struct pnp_device_id *id)
 {
 	struct parport *pdata;
 	unsigned long io_lo, io_hi;
 	int dma, irq;
 
-	if (pnp_port_valid(dev,0) &&
-		!(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
-		io_lo = pnp_port_start(dev,0);
+	if (pnp_port_valid(dev, 0) &&
+		!(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		io_lo = pnp_port_start(dev, 0);
 	} else
 		return -EINVAL;
 
-	if (pnp_port_valid(dev,1) &&
-		!(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
-		io_hi = pnp_port_start(dev,1);
+	if (pnp_port_valid(dev, 1) &&
+		!(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) {
+		io_hi = pnp_port_start(dev, 1);
 	} else
 		io_hi = 0;
 
-	if (pnp_irq_valid(dev,0) &&
-		!(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
-		irq = pnp_irq(dev,0);
+	if (pnp_irq_valid(dev, 0) &&
+		!(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		irq = pnp_irq(dev, 0);
 	} else
 		irq = PARPORT_IRQ_NONE;
 
-	if (pnp_dma_valid(dev,0) &&
-		!(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
-		dma = pnp_dma(dev,0);
+	if (pnp_dma_valid(dev, 0) &&
+		!(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		dma = pnp_dma(dev, 0);
 	} else
 		dma = PARPORT_DMA_NONE;
 
 	dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
-	if (!(pdata = parport_pc_probe_port(io_lo, io_hi,
-					irq, dma, &dev->dev, 0)))
+	pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0);
+	if (pdata == NULL)
 		return -ENODEV;
 
-	pnp_set_drvdata(dev,pdata);
+	pnp_set_drvdata(dev, pdata);
 	return 0;
 }
 
@@ -3203,7 +3298,7 @@ static struct platform_driver parport_pc_platform_driver = {
 
 /* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
 static int __devinit __attribute__((unused))
-parport_pc_find_isa_ports (int autoirq, int autodma)
+parport_pc_find_isa_ports(int autoirq, int autodma)
 {
 	int count = 0;
 
@@ -3227,7 +3322,7 @@ parport_pc_find_isa_ports (int autoirq, int autodma)
  * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
  * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
  */
-static void __init parport_pc_find_ports (int autoirq, int autodma)
+static void __init parport_pc_find_ports(int autoirq, int autodma)
 {
 	int count = 0, err;
 
@@ -3261,11 +3356,18 @@ static void __init parport_pc_find_ports (int autoirq, int autodma)
  *	syntax and keep in mind that code below is a cleaned up version.
  */
 
-static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
-static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
-	{ [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
-static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
-static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = {
+	[0 ... PARPORT_PC_MAX_PORTS] = 0
+};
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = {
+	[0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO
+};
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = {
+	[0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE
+};
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = {
+	[0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY
+};
 
 static int __init parport_parse_param(const char *s, int *val,
 				int automatic, int none, int nofifo)
@@ -3306,18 +3408,19 @@ static int __init parport_parse_dma(const char *dmastr, int *val)
 #ifdef CONFIG_PCI
 static int __init parport_init_mode_setup(char *str)
 {
-	printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
-
-	if (!strcmp (str, "spp"))
-		parport_init_mode=1;
-	if (!strcmp (str, "ps2"))
-		parport_init_mode=2;
-	if (!strcmp (str, "epp"))
-		parport_init_mode=3;
-	if (!strcmp (str, "ecp"))
-		parport_init_mode=4;
-	if (!strcmp (str, "ecpepp"))
-		parport_init_mode=5;
+	printk(KERN_DEBUG
+	     "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+
+	if (!strcmp(str, "spp"))
+		parport_init_mode = 1;
+	if (!strcmp(str, "ps2"))
+		parport_init_mode = 2;
+	if (!strcmp(str, "epp"))
+		parport_init_mode = 3;
+	if (!strcmp(str, "ecp"))
+		parport_init_mode = 4;
+	if (!strcmp(str, "ecpepp"))
+		parport_init_mode = 5;
 	return 1;
 }
 #endif
@@ -3341,7 +3444,8 @@ module_param(verbose_probing, int, 0644);
 #endif
 #ifdef CONFIG_PCI
 static char *init_mode;
-MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+MODULE_PARM_DESC(init_mode,
+	"Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
 module_param(init_mode, charp, 0);
 #endif
 
@@ -3372,7 +3476,7 @@ static int __init parse_parport_params(void)
 				irqval[0] = val;
 				break;
 			default:
-				printk (KERN_WARNING
+				printk(KERN_WARNING
 					"parport_pc: irq specified "
 					"without base address.  Use 'io=' "
 					"to specify one\n");
@@ -3385,7 +3489,7 @@ static int __init parse_parport_params(void)
 				dmaval[0] = val;
 				break;
 			default:
-				printk (KERN_WARNING
+				printk(KERN_WARNING
 					"parport_pc: dma specified "
 					"without base address.  Use 'io=' "
 					"to specify one\n");
@@ -3396,7 +3500,7 @@ static int __init parse_parport_params(void)
 
 #else
 
-static int parport_setup_ptr __initdata = 0;
+static int parport_setup_ptr __initdata;
 
 /*
  * Acceptable parameters:
@@ -3407,7 +3511,7 @@ static int parport_setup_ptr __initdata = 0;
  *
  * IRQ/DMA may be numeric or 'auto' or 'none'
  */
-static int __init parport_setup (char *str)
+static int __init parport_setup(char *str)
 {
 	char *endptr;
 	char *sep;
@@ -3419,15 +3523,15 @@ static int __init parport_setup (char *str)
 		return 1;
 	}
 
-	if (!strncmp (str, "auto", 4)) {
+	if (!strncmp(str, "auto", 4)) {
 		irqval[0] = PARPORT_IRQ_AUTO;
 		dmaval[0] = PARPORT_DMA_AUTO;
 		return 1;
 	}
 
-	val = simple_strtoul (str, &endptr, 0);
+	val = simple_strtoul(str, &endptr, 0);
 	if (endptr == str) {
-		printk (KERN_WARNING "parport=%s not understood\n", str);
+		printk(KERN_WARNING "parport=%s not understood\n", str);
 		return 1;
 	}
 
@@ -3461,7 +3565,7 @@ static int __init parse_parport_params(void)
 	return io[0] == PARPORT_DISABLE;
 }
 
-__setup ("parport=", parport_setup);
+__setup("parport=", parport_setup);
 
 /*
  * Acceptable parameters:
@@ -3469,7 +3573,7 @@ __setup ("parport=", parport_setup);
  * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
  */
 #ifdef CONFIG_PCI
-__setup("parport_init_mode=",parport_init_mode_setup);
+__setup("parport_init_mode=", parport_init_mode_setup);
 #endif
 #endif
 
@@ -3493,13 +3597,13 @@ static int __init parport_pc_init(void)
 		for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
 			if (!io[i])
 				break;
-			if ((io_hi[i]) == PARPORT_IOHI_AUTO)
-			       io_hi[i] = 0x400 + io[i];
+			if (io_hi[i] == PARPORT_IOHI_AUTO)
+				io_hi[i] = 0x400 + io[i];
 			parport_pc_probe_port(io[i], io_hi[i],
-					  irqval[i], dmaval[i], NULL, 0);
+					irqval[i], dmaval[i], NULL, 0);
 		}
 	} else
-		parport_pc_find_ports (irqval[0], dmaval[0]);
+		parport_pc_find_ports(irqval[0], dmaval[0]);
 
 	return 0;
 }
@@ -3507,9 +3611,9 @@ static int __init parport_pc_init(void)
 static void __exit parport_pc_exit(void)
 {
 	if (pci_registered_parport)
-		pci_unregister_driver (&parport_pc_pci_driver);
+		pci_unregister_driver(&parport_pc_pci_driver);
 	if (pnp_registered_parport)
-		pnp_unregister_driver (&parport_pc_pnp_driver);
+		pnp_unregister_driver(&parport_pc_pnp_driver);
 	platform_driver_unregister(&parport_pc_platform_driver);
 
 	while (!list_empty(&ports_list)) {
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index 0ebca450ed2..dffa5d4fb29 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -614,7 +614,10 @@ parport_register_device(struct parport *port, const char *name,
 	 * pardevice fields. -arca
 	 */
 	port->ops->init_state(tmp, tmp->state);
-	parport_device_proc_register(tmp);
+	if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) {
+		port->proc_device = tmp;
+		parport_device_proc_register(tmp);
+	}
 	return tmp;
 
  out_free_all:
@@ -646,10 +649,14 @@ void parport_unregister_device(struct pardevice *dev)
 	}
 #endif
 
-	parport_device_proc_unregister(dev);
-
 	port = dev->port->physport;
 
+	if (port->proc_device == dev) {
+		port->proc_device = NULL;
+		clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags);
+		parport_device_proc_unregister(dev);
+	}
+
 	if (port->cad == dev) {
 		printk(KERN_DEBUG "%s: %s forgot to release port\n",
 		       port->name, dev->name);
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index 4fc168b7009..e68d5f20ffb 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -129,7 +129,6 @@ struct acpiphp_func {
 	struct acpiphp_bridge *bridge;	/* Ejectable PCI-to-PCI bridge */
 
 	struct list_head sibling;
-	struct pci_dev *pci_dev;
 	struct notifier_block nb;
 	acpi_handle	handle;
 
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index a33794d9e0d..3a6064bce56 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -32,9 +32,6 @@
 
 /*
  * Lifetime rules for pci_dev:
- *  - The one in acpiphp_func has its refcount elevated by pci_get_slot()
- *    when the driver is loaded or when an insertion event occurs.  It loses
- *    a refcount when its ejected or the driver unloads.
  *  - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
  *    when the bridge is scanned and it loses a refcount when the bridge
  *    is removed.
@@ -130,6 +127,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	unsigned long long adr, sun;
 	int device, function, retval;
 	struct pci_bus *pbus = bridge->pci_bus;
+	struct pci_dev *pdev;
 
 	if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
 		return AE_OK;
@@ -213,10 +211,10 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	newfunc->slot = slot;
 	list_add_tail(&newfunc->sibling, &slot->funcs);
 
-	/* associate corresponding pci_dev */
-	newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function));
-	if (newfunc->pci_dev) {
+	pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
+	if (pdev) {
 		slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
+		pci_dev_put(pdev);
 	}
 
 	if (is_dock_device(handle)) {
@@ -617,7 +615,6 @@ static void cleanup_bridge(struct acpiphp_bridge *bridge)
 				if (ACPI_FAILURE(status))
 					err("failed to remove notify handler\n");
 			}
-			pci_dev_put(func->pci_dev);
 			list_del(list);
 			kfree(func);
 		}
@@ -1101,22 +1098,24 @@ static int __ref enable_device(struct acpiphp_slot *slot)
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 
-	/* associate pci_dev to our representation */
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
-		func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
-							func->function));
-		if (!func->pci_dev)
+		dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
+						  func->function));
+		if (!dev)
 			continue;
 
-		if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
-		    func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
+		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
+		    dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) {
+			pci_dev_put(dev);
 			continue;
+		}
 
 		status = find_p2p_bridge(func->handle, (u32)1, bus, NULL);
 		if (ACPI_FAILURE(status))
 			warn("find_p2p_bridge failed (error code = 0x%x)\n",
 				status);
+		pci_dev_put(dev);
 	}
 
 	slot->flags |= SLOT_ENABLED;
@@ -1142,17 +1141,14 @@ static void disable_bridges(struct pci_bus *bus)
  */
 static int disable_device(struct acpiphp_slot *slot)
 {
-	int retval = 0;
 	struct acpiphp_func *func;
-	struct list_head *l;
+	struct pci_dev *pdev;
 
 	/* is this slot already disabled? */
 	if (!(slot->flags & SLOT_ENABLED))
 		goto err_exit;
 
-	list_for_each (l, &slot->funcs) {
-		func = list_entry(l, struct acpiphp_func, sibling);
-
+	list_for_each_entry(func, &slot->funcs, sibling) {
 		if (func->bridge) {
 			/* cleanup p2p bridges under this P2P bridge */
 			cleanup_p2p_bridge(func->bridge->handle,
@@ -1160,35 +1156,28 @@ static int disable_device(struct acpiphp_slot *slot)
 			func->bridge = NULL;
 		}
 
-		if (func->pci_dev) {
-			pci_stop_bus_device(func->pci_dev);
-			if (func->pci_dev->subordinate) {
-				disable_bridges(func->pci_dev->subordinate);
-				pci_disable_device(func->pci_dev);
+		pdev = pci_get_slot(slot->bridge->pci_bus,
+				    PCI_DEVFN(slot->device, func->function));
+		if (pdev) {
+			pci_stop_bus_device(pdev);
+			if (pdev->subordinate) {
+				disable_bridges(pdev->subordinate);
+				pci_disable_device(pdev);
 			}
+			pci_remove_bus_device(pdev);
+			pci_dev_put(pdev);
 		}
 	}
 
-	list_for_each (l, &slot->funcs) {
-		func = list_entry(l, struct acpiphp_func, sibling);
-
+	list_for_each_entry(func, &slot->funcs, sibling) {
 		acpiphp_unconfigure_ioapics(func->handle);
 		acpiphp_bus_trim(func->handle);
-		/* try to remove anyway.
-		 * acpiphp_bus_add might have been failed */
-
-		if (!func->pci_dev)
-			continue;
-
-		pci_remove_bus_device(func->pci_dev);
-		pci_dev_put(func->pci_dev);
-		func->pci_dev = NULL;
 	}
 
 	slot->flags &= (~SLOT_ENABLED);
 
- err_exit:
-	return retval;
+err_exit:
+	return 0;
 }
 
 
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index dd18f857dfb..42e4260c3b1 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -153,45 +153,47 @@ int ibmphp_init_devno(struct slot **cur_slot)
 		return -1;
 	}
 	for (loop = 0; loop < len; loop++) {
-		if ((*cur_slot)->number == rtable->slots[loop].slot) {
-		if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+		if ((*cur_slot)->number == rtable->slots[loop].slot &&
+		    (*cur_slot)->bus == rtable->slots[loop].bus) {
+			struct io_apic_irq_attr irq_attr;
+
 			(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
 			for (i = 0; i < 4; i++)
 				(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
-						(int) (*cur_slot)->device, i);
-
-				debug("(*cur_slot)->irq[0] = %x\n",
-						(*cur_slot)->irq[0]);
-				debug("(*cur_slot)->irq[1] = %x\n",
-						(*cur_slot)->irq[1]);
-				debug("(*cur_slot)->irq[2] = %x\n",
-						(*cur_slot)->irq[2]);
-				debug("(*cur_slot)->irq[3] = %x\n",
-						(*cur_slot)->irq[3]);
-
-				debug("rtable->exlusive_irqs = %x\n",
+						(int) (*cur_slot)->device, i,
+						&irq_attr);
+
+			debug("(*cur_slot)->irq[0] = %x\n",
+					(*cur_slot)->irq[0]);
+			debug("(*cur_slot)->irq[1] = %x\n",
+					(*cur_slot)->irq[1]);
+			debug("(*cur_slot)->irq[2] = %x\n",
+					(*cur_slot)->irq[2]);
+			debug("(*cur_slot)->irq[3] = %x\n",
+					(*cur_slot)->irq[3]);
+
+			debug("rtable->exlusive_irqs = %x\n",
 					rtable->exclusive_irqs);
-				debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+			debug("rtable->slots[loop].irq[0].bitmap = %x\n",
 					rtable->slots[loop].irq[0].bitmap);
-				debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+			debug("rtable->slots[loop].irq[1].bitmap = %x\n",
 					rtable->slots[loop].irq[1].bitmap);
-				debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+			debug("rtable->slots[loop].irq[2].bitmap = %x\n",
 					rtable->slots[loop].irq[2].bitmap);
-				debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+			debug("rtable->slots[loop].irq[3].bitmap = %x\n",
 					rtable->slots[loop].irq[3].bitmap);
 
-				debug("rtable->slots[loop].irq[0].link = %x\n",
+			debug("rtable->slots[loop].irq[0].link = %x\n",
 					rtable->slots[loop].irq[0].link);
-				debug("rtable->slots[loop].irq[1].link = %x\n",
+			debug("rtable->slots[loop].irq[1].link = %x\n",
 					rtable->slots[loop].irq[1].link);
-				debug("rtable->slots[loop].irq[2].link = %x\n",
+			debug("rtable->slots[loop].irq[2].link = %x\n",
 					rtable->slots[loop].irq[2].link);
-				debug("rtable->slots[loop].irq[3].link = %x\n",
+			debug("rtable->slots[loop].irq[3].link = %x\n",
 					rtable->slots[loop].irq[3].link);
-				debug("end of init_devno\n");
-				kfree(rtable);
-				return 0;
-			}
+			debug("end of init_devno\n");
+			kfree(rtable);
+			return 0;
 		}
 	}
 
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 3eee70928d4..2d6da78fddb 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -679,7 +679,7 @@ alloc_err:
 	return rc;
 }
 
-static int sn_pci_hotplug_init(void)
+static int __init sn_pci_hotplug_init(void)
 {
 	struct pci_bus *pci_bus = NULL;
 	int rc;
@@ -716,7 +716,7 @@ static int sn_pci_hotplug_init(void)
 	return registered == 1 ? 0 : -ENODEV;
 }
 
-static void sn_pci_hotplug_exit(void)
+static void __exit sn_pci_hotplug_exit(void)
 {
 	struct hotplug_slot *bss_hotplug_slot;
 
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index 6808d8333ec..737a1c44b07 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -98,6 +98,7 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
 	int max_irq;
 	int pos;
 	int irq;
+	int node;
 
 	pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
 	if (!pos)
@@ -125,7 +126,8 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
 	cfg->msg.address_lo = 0xffffffff;
 	cfg->msg.address_hi = 0xffffffff;
 
-	irq = create_irq();
+	node = dev_to_node(&dev->dev);
+	irq = create_irq_nr(0, node);
 
 	if (irq <= 0) {
 		kfree(cfg);
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index a563fbe559d..cd389162735 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1972,15 +1972,6 @@ static int __init init_dmars(void)
 		}
 	}
 
-#ifdef CONFIG_INTR_REMAP
-	if (!intr_remapping_enabled) {
-		ret = enable_intr_remapping(0);
-		if (ret)
-			printk(KERN_ERR
-			       "IOMMU: enable interrupt remapping failed\n");
-	}
-#endif
-
 	/*
 	 * For each rmrr
 	 *   for each dev attached to rmrr
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index f5e0ea724a6..3a0cb0bb059 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -15,6 +15,14 @@ static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
 static int ir_ioapic_num;
 int intr_remapping_enabled;
 
+static int disable_intremap;
+static __init int setup_nointremap(char *str)
+{
+	disable_intremap = 1;
+	return 0;
+}
+early_param("nointremap", setup_nointremap);
+
 struct irq_2_iommu {
 	struct intel_iommu *iommu;
 	u16 irte_index;
@@ -23,15 +31,12 @@ struct irq_2_iommu {
 };
 
 #ifdef CONFIG_GENERIC_HARDIRQS
-static struct irq_2_iommu *get_one_free_irq_2_iommu(int cpu)
+static struct irq_2_iommu *get_one_free_irq_2_iommu(int node)
 {
 	struct irq_2_iommu *iommu;
-	int node;
-
-	node = cpu_to_node(cpu);
 
 	iommu = kzalloc_node(sizeof(*iommu), GFP_ATOMIC, node);
-	printk(KERN_DEBUG "alloc irq_2_iommu on cpu %d node %d\n", cpu, node);
+	printk(KERN_DEBUG "alloc irq_2_iommu on node %d\n", node);
 
 	return iommu;
 }
@@ -48,7 +53,7 @@ static struct irq_2_iommu *irq_2_iommu(unsigned int irq)
 	return desc->irq_2_iommu;
 }
 
-static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu)
+static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node)
 {
 	struct irq_desc *desc;
 	struct irq_2_iommu *irq_iommu;
@@ -56,7 +61,7 @@ static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu)
 	/*
 	 * alloc irq desc if not allocated already.
 	 */
-	desc = irq_to_desc_alloc_cpu(irq, cpu);
+	desc = irq_to_desc_alloc_node(irq, node);
 	if (!desc) {
 		printk(KERN_INFO "can not get irq_desc for %d\n", irq);
 		return NULL;
@@ -65,14 +70,14 @@ static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu)
 	irq_iommu = desc->irq_2_iommu;
 
 	if (!irq_iommu)
-		desc->irq_2_iommu = get_one_free_irq_2_iommu(cpu);
+		desc->irq_2_iommu = get_one_free_irq_2_iommu(node);
 
 	return desc->irq_2_iommu;
 }
 
 static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
 {
-	return irq_2_iommu_alloc_cpu(irq, boot_cpu_id);
+	return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id));
 }
 
 #else /* !CONFIG_SPARSE_IRQ */
@@ -423,20 +428,6 @@ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
 		      readl, (sts & DMA_GSTS_IRTPS), sts);
 	spin_unlock_irqrestore(&iommu->register_lock, flags);
 
-	if (mode == 0) {
-		spin_lock_irqsave(&iommu->register_lock, flags);
-
-		/* enable comaptiblity format interrupt pass through */
-		cmd = iommu->gcmd | DMA_GCMD_CFI;
-		iommu->gcmd |= DMA_GCMD_CFI;
-		writel(cmd, iommu->reg + DMAR_GCMD_REG);
-
-		IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
-			      readl, (sts & DMA_GSTS_CFIS), sts);
-
-		spin_unlock_irqrestore(&iommu->register_lock, flags);
-	}
-
 	/*
 	 * global invalidation of interrupt entry cache before enabling
 	 * interrupt-remapping.
@@ -516,6 +507,23 @@ end:
 	spin_unlock_irqrestore(&iommu->register_lock, flags);
 }
 
+int __init intr_remapping_supported(void)
+{
+	struct dmar_drhd_unit *drhd;
+
+	if (disable_intremap)
+		return 0;
+
+	for_each_drhd_unit(drhd) {
+		struct intel_iommu *iommu = drhd->iommu;
+
+		if (!ecap_ir_support(iommu->ecap))
+			return 0;
+	}
+
+	return 1;
+}
+
 int __init enable_intr_remapping(int eim)
 {
 	struct dmar_drhd_unit *drhd;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 6f2e6295e77..362773247fb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev,
 		entry->msi_attrib.default_irq = dev->irq;
 		entry->msi_attrib.pos = pos;
 		entry->mask_base = base;
-		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
 		msix_mask_irq(entry, 1);
 
 		list_add_tail(&entry->list, &dev->msi_list);
@@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev,
 	msix_set_enable(dev, 1);
 	dev->msix_enabled = 1;
 
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		int vector = entry->msi_attrib.entry_nr;
+		entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
+					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 34bf0fdf504..1a91bf9687a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
 	} else {
 		error = -ENODEV;
 		/* Fall back to PCI_D0 if native PM is not supported */
-		pci_update_current_state(dev, PCI_D0);
+		if (!dev->pm_cap)
+			dev->current_state = PCI_D0;
 	}
 
 	return error;
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index c7ad68b6c6d..aa14482a477 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -95,6 +95,9 @@ struct aer_broadcast_data {
 static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
 		enum pci_ers_result new)
 {
+	if (new == PCI_ERS_RESULT_NONE)
+		return orig;
+
 	switch (orig) {
 	case PCI_ERS_RESULT_CAN_RECOVER:
 	case PCI_ERS_RESULT_RECOVERED:
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b924e2463f8..091ce70051e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data)
 
 static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
 {
-	pci_ers_result_t status = PCI_ERS_RESULT_NONE;
+	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
 	int retval;
 
 	/* If fatal, restore cfg space for possible link reset at upstream */
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3c3e081b83..f1ae2475fff 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -745,6 +745,8 @@ int pci_setup_device(struct pci_dev *dev)
 
 	/* Early fixups, before probing the BARs */
 	pci_fixup_device(pci_fixup_early, dev);
+	/* device class may be changed after fixup */
+	class = dev->class >> 8;
 
 	switch (dev->hdr_type) {		    /* header type */
 	case PCI_HEADER_TYPE_NORMAL:		    /* standard header */
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 27647354398..fbf965b31c1 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER || ARCH_PXA_ESERIES)
+		    || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac4632722..047394d98ac 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
+pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
new file mode 100644
index 00000000000..490749ea677
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -0,0 +1,174 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_stargate2.c
+ *
+ * Stargate 2 PCMCIA specific routines.
+ *
+ * Created:	December 6, 2005
+ * Author:	Ed C. Epp
+ * Copyright:	Intel Corp 2005
+ *              Jonathan Cameron <jic23@cam.ac.uk> 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define SG2_S0_BUFF_CTL		120
+#define SG2_S0_POWER_CTL	108
+#define SG2_S0_GPIO_RESET	82
+#define SG2_S0_GPIO_DETECT	53
+#define SG2_S0_GPIO_READY	81
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+};
+
+static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
+	state->ready  = !!gpio_get_value(SG2_S0_GPIO_READY);
+	state->bvd1   = 0; /* not available - battery detect on card */
+	state->bvd2   = 0; /* not available */
+	state->vs_3v  = 1; /* not available - voltage detect for card */
+	state->vs_Xv  = 0; /* not available */
+	state->wrprot = 0; /* not available - write protect */
+}
+
+static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+	/* Enable card power */
+	switch (state->Vcc) {
+	case 0:
+		/* sets power ctl register high */
+		gpio_set_value(SG2_S0_POWER_CTL, 1);
+		break;
+	case 33:
+	case 50:
+		/* sets power control register low (clear) */
+		gpio_set_value(SG2_S0_POWER_CTL, 0);
+		msleep(100);
+		break;
+	default:
+		pr_err("%s(): bad Vcc %u\n",
+		       __func__, state->Vcc);
+		return -1;
+	}
+
+	/* reset */
+	gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
+	.owner			= THIS_MODULE,
+	.hw_init		= sg2_pcmcia_hw_init,
+	.hw_shutdown		= sg2_pcmcia_hw_shutdown,
+	.socket_state		= sg2_pcmcia_socket_state,
+	.configure_socket	= sg2_pcmcia_configure_socket,
+	.socket_init		= sg2_pcmcia_socket_init,
+	.socket_suspend		= sg2_pcmcia_socket_suspend,
+	.nr			= 1,
+};
+
+static struct platform_device *sg2_pcmcia_device;
+
+static int __init sg2_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_stargate2())
+		return -ENODEV;
+
+	sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!sg2_pcmcia_device)
+		return -ENOMEM;
+
+	ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl");
+	if (ret)
+		goto error_put_platform_device;
+	ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl");
+	if (ret)
+		goto error_free_gpio_buff_ctl;
+	ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset");
+	if (ret)
+		goto error_free_gpio_power_ctl;
+	/* Set gpio directions */
+	gpio_direction_output(SG2_S0_BUFF_CTL, 0);
+	gpio_direction_output(SG2_S0_POWER_CTL, 1);
+	gpio_direction_output(SG2_S0_GPIO_RESET, 1);
+
+	ret = platform_device_add_data(sg2_pcmcia_device,
+				       &sg2_pcmcia_ops,
+				       sizeof(sg2_pcmcia_ops));
+	if (ret)
+		goto error_free_gpio_reset;
+
+	ret = platform_device_add(sg2_pcmcia_device);
+	if (ret)
+		goto error_free_gpio_reset;
+
+	return 0;
+error_free_gpio_reset:
+	gpio_free(SG2_S0_GPIO_RESET);
+error_free_gpio_power_ctl:
+	gpio_free(SG2_S0_POWER_CTL);
+error_free_gpio_buff_ctl:
+	gpio_free(SG2_S0_BUFF_CTL);
+error_put_platform_device:
+	platform_device_put(sg2_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit sg2_pcmcia_exit(void)
+{
+	platform_device_unregister(sg2_pcmcia_device);
+	gpio_free(SG2_S0_BUFF_CTL);
+	gpio_free(SG2_S0_POWER_CTL);
+	gpio_free(SG2_S0_GPIO_RESET);
+}
+
+fs_initcall(sg2_pcmcia_init);
+module_exit(sg2_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index eeafc6c0160..bfc1a8892a3 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = {
 	{KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
 	{KE_KEY, 0x40, KEY_PREVIOUSSONG},
 	{KE_KEY, 0x41, KEY_NEXTSONG},
-	{KE_KEY, 0x43, KEY_STOP},
+	{KE_KEY, 0x43, KEY_STOPCD},
 	{KE_KEY, 0x45, KEY_PLAYPAUSE},
 	{KE_KEY, 0x50, KEY_EMAIL},
 	{KE_KEY, 0x51, KEY_WWW},
-	{KE_KEY, 0x5C, BTN_EXTRA},  /* Performance */
+	{KE_KEY, 0x5C, KEY_SCREENLOCK},  /* Screenlock */
 	{KE_KEY, 0x5D, KEY_WLAN},
 	{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
 	{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
 	{KE_KEY, 0x82, KEY_CAMERA},
-	{KE_KEY, 0x8A, KEY_TV},
+	{KE_KEY, 0x8A, KEY_PROG1},
 	{KE_KEY, 0x95, KEY_MEDIA},
 	{KE_KEY, 0x99, KEY_PHONE},
 	{KE_END, 0},
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 6f54fd1757c..353a898c369 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -158,6 +158,7 @@ enum { KE_KEY, KE_END };
 static struct key_entry eeepc_keymap[] = {
 	/* Sleep already handled via generic ACPI code */
 	{KE_KEY, 0x10, KEY_WLAN },
+	{KE_KEY, 0x11, KEY_WLAN },
 	{KE_KEY, 0x12, KEY_PROG1 },
 	{KE_KEY, 0x13, KEY_MUTE },
 	{KE_KEY, 0x14, KEY_VOLUMEDOWN },
@@ -166,6 +167,8 @@ static struct key_entry eeepc_keymap[] = {
 	{KE_KEY, 0x1b, KEY_ZOOM },
 	{KE_KEY, 0x1c, KEY_PROG2 },
 	{KE_KEY, 0x1d, KEY_PROG3 },
+	{KE_KEY, NOTIFY_BRN_MIN,     KEY_BRIGHTNESSDOWN },
+	{KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP },
 	{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
 	{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
 	{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
@@ -381,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf)
 EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
 EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
 EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
+EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
 
 static struct attribute *platform_attributes[] = {
 	&dev_attr_camera.attr,
 	&dev_attr_cardr.attr,
 	&dev_attr_disp.attr,
+	&dev_attr_cpufv.attr,
 	NULL
 };
 
@@ -512,15 +517,21 @@ static int eeepc_hotk_check(void)
 	return 0;
 }
 
-static void notify_brn(void)
+static int notify_brn(void)
 {
+	/* returns the *previous* brightness, or -1 */
 	struct backlight_device *bd = eeepc_backlight_device;
-	if (bd)
+	if (bd) {
+		int old = bd->props.brightness;
 		bd->props.brightness = read_brightness(bd);
+		return old;
+	}
+	return -1;
 }
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
+	enum rfkill_state state;
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
 
@@ -532,7 +543,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		return;
 	}
 
-	if (get_acpi(CM_ASL_WLAN) == 1) {
+	eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
+
+	if (state == RFKILL_STATE_UNBLOCKED) {
 		dev = pci_get_slot(bus, 0);
 		if (dev) {
 			/* Device already present */
@@ -552,23 +565,41 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 			pci_dev_put(dev);
 		}
 	}
+
+	rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
 }
 
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
 	static struct key_entry *key;
 	u16 count;
+	int brn = -ENODEV;
 
 	if (!ehotk)
 		return;
 	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
-		notify_brn();
+		brn = notify_brn();
 	count = ehotk->event_count[event % 128]++;
 	acpi_bus_generate_proc_event(ehotk->device, event, count);
 	acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
 					dev_name(&ehotk->device->dev), event,
 					count);
 	if (ehotk->inputdev) {
+		if (brn != -ENODEV) {
+			/* brightness-change events need special
+			 * handling for conversion to key events
+			 */
+			if (brn < 0)
+				brn = event;
+			else
+				brn += NOTIFY_BRN_MIN;
+			if (event < brn)
+				event = NOTIFY_BRN_MIN; /* brightness down */
+			else if (event > brn)
+				event = NOTIFY_BRN_MIN + 2; /* ... up */
+			else
+				event = NOTIFY_BRN_MIN + 1; /* ... unchanged */
+		}
 		key = eepc_get_entry_by_scancode(event);
 		if (key) {
 			switch (key->type) {
@@ -649,6 +680,9 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	if (ACPI_FAILURE(status))
 		printk(EEEPC_ERR "Error installing notify handler\n");
 
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
 	if (get_acpi(CM_ASL_WLAN) != -1) {
 		ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
 							   RFKILL_TYPE_WLAN);
@@ -704,9 +738,6 @@ static int eeepc_hotk_add(struct acpi_device *device)
 			goto bluetooth_fail;
 	}
 
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
 	return 0;
 
  bluetooth_fail:
@@ -717,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
  wlan_fail:
 	if (ehotk->eeepc_wlan_rfkill)
 		rfkill_free(ehotk->eeepc_wlan_rfkill);
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
 	kfree(ehotk);
 	ehotk = NULL;
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 9a3a682c698..9496494f340 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 
 	/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
 	ret = 0;
-	if (acpi_bus_power_manageable(handle)) {
-		ret = acpi_bus_set_power(handle, ACPI_STATE_D3);
-		if (ret)
-			return ret;
-	}
+	if (acpi_bus_power_manageable(handle))
+		acpi_bus_set_power(handle, ACPI_STATE_D3);
+		/* continue even if acpi_bus_set_power() fails */
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
 		ret = -ENODEV;
 	return ret;
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index adf17856bac..7f207f335be 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -123,7 +123,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
 	}
 
 	flags = irq_flags(triggering, polarity, shareable);
-	irq = acpi_register_gsi(gsi, triggering, polarity);
+	irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
 	if (irq >= 0)
 		pcibios_penalize_isa_irq(irq, 1);
 	else
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index f604061d2bb..ba976542788 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -638,6 +638,24 @@ int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t start,
 }
 EXPORT_SYMBOL(pnp_possible_config);
 
+int pnp_range_reserved(resource_size_t start, resource_size_t end)
+{
+	struct pnp_dev *dev;
+	struct pnp_resource *pnp_res;
+	resource_size_t *dev_start, *dev_end;
+
+	pnp_for_each_dev(dev) {
+		list_for_each_entry(pnp_res, &dev->resources, list) {
+			dev_start = &pnp_res->res.start;
+			dev_end   = &pnp_res->res.end;
+			if (ranged_conflict(&start, &end, dev_start, dev_end))
+				return 1;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(pnp_range_reserved);
+
 /* format is: pnp_reserve_irq=irq1[,irq2] .... */
 static int __init pnp_setup_reserve_irq(char *str)
 {
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 72b15495183..c6628f5a0af 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -497,7 +497,7 @@ static struct platform_driver da903x_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= da903x_regulator_probe,
-	.remove		= da903x_regulator_remove,
+	.remove		= __devexit_p(da903x_regulator_remove),
 };
 
 static int __init da903x_regulator_init(void)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4e9851fc174..277d35d232f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -692,7 +692,7 @@ config RTC_DRV_GENERIC
 	tristate "Generic RTC support"
 	# Please consider writing a new RTC driver instead of using the generic
 	# RTC abstraction
-	depends on PARISC || M68K || PPC
+	depends on PARISC || M68K || PPC || SUPERH32
 	help
 	  Say Y or M here to enable RTC support on systems using the generic
 	  RTC abstraction. If you do not know what you are doing, you should
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283dd02..551332e4ed0 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA			0x000
+#define EP93XX_RTC_MATCH		0x004
+#define EP93XX_RTC_STATUS		0x008
+#define  EP93XX_RTC_STATUS_INTR		 (1<<0)
+#define EP93XX_RTC_LOAD			0x00C
+#define EP93XX_RTC_CONTROL		0x010
+#define  EP93XX_RTC_CONTROL_MIE		 (1<<0)
+#define EP93XX_RTC_SWCOMP		0x108
+#define  EP93XX_RTC_SWCOMP_DEL_MASK	 0x001f0000
+#define  EP93XX_RTC_SWCOMP_DEL_SHIFT	 16
+#define  EP93XX_RTC_SWCOMP_INT_MASK	 0x0000ffff
+#define  EP93XX_RTC_SWCOMP_INT_SHIFT	 0
+
+#define DRV_VERSION "0.3"
 
-#define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD		EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP	EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+	void __iomem	*mmio_base;
+};
 
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
 				unsigned short *delete)
 {
-	unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long comp;
+
+	comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
 
 	if (preload)
-		*preload = comp & 0xffff;
+		*preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+				>> EP93XX_RTC_SWCOMP_INT_SHIFT;
 
 	if (delete)
-		*delete = (comp >> 16) & 0x1f;
+		*delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+				>> EP93XX_RTC_SWCOMP_DEL_SHIFT;
 
 	return 0;
 }
 
 static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long time;
+
+	 time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
 
 	rtc_time_to_tm(time, tm);
 	return 0;
@@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
 {
-	__raw_writel(secs + 1, EP93XX_RTC_LOAD);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+	__raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
 	return 0;
 }
 
@@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	unsigned short preload, delete;
 
-	ep93xx_get_swcomp(dev, &preload, &delete);
+	ep93xx_rtc_get_swcomp(dev, &preload, &delete);
 
 	seq_printf(seq, "preload\t\t: %d\n", preload);
 	seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = {
 	.proc		= ep93xx_rtc_proc,
 };
 
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short preload;
 
-	ep93xx_get_swcomp(dev, &preload, NULL);
+	ep93xx_rtc_get_swcomp(dev, &preload, NULL);
 
 	return sprintf(buf, "%d\n", preload);
 }
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
 
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short delete;
 
-	ep93xx_get_swcomp(dev, NULL, &delete);
+	ep93xx_rtc_get_swcomp(dev, NULL, &delete);
 
 	return sprintf(buf, "%d\n", delete);
 }
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
 
 
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = rtc_device_register("ep93xx",
-				&dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+	struct ep93xx_rtc *ep93xx_rtc;
+	struct resource *res;
+	struct rtc_device *rtc;
+	int err;
+
+	ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+	if (ep93xx_rtc == NULL)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+	if (ep93xx_rtc->mmio_base == NULL) {
+		err = -ENXIO;
+		goto fail;
+	}
 
+	pdev->dev.platform_data = ep93xx_rtc;
+
+	rtc = rtc_device_register(pdev->name,
+				&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		return PTR_ERR(rtc);
+		err = PTR_ERR(rtc);
+		goto fail;
 	}
 
-	platform_set_drvdata(dev, rtc);
+	platform_set_drvdata(pdev, rtc);
 
-	device_create_file(&dev->dev, &dev_attr_comp_preload);
-	device_create_file(&dev->dev, &dev_attr_comp_delete);
+	err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+	if (err)
+		goto fail;
+	err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+	if (err) {
+		device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+		goto fail;
+	}
 
 	return 0;
+
+fail:
+	if (ep93xx_rtc->mmio_base) {
+		iounmap(ep93xx_rtc->mmio_base);
+		pdev->dev.platform_data = NULL;
+	}
+	release_mem_region(res->start, resource_size(res));
+	return err;
 }
 
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = platform_get_drvdata(dev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+	struct resource *res;
+
+	/* cleanup sysfs */
+	device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+	device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+	rtc_device_unregister(rtc);
+
+	iounmap(ep93xx_rtc->mmio_base);
+	pdev->dev.platform_data = NULL;
 
- 	if (rtc)
-		rtc_device_unregister(rtc);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(dev, NULL);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ep93xx-rtc");
 
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
 	.driver		= {
 		.name	= "ep93xx-rtc",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= ep93xx_rtc_probe,
-	.remove		= __devexit_p(ep93xx_rtc_remove),
+	.remove		= __exit_p(ep93xx_rtc_remove),
 };
 
 static int __init ep93xx_rtc_init(void)
 {
-	return platform_driver_register(&ep93xx_rtc_platform_driver);
+        return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
 }
 
 static void __exit ep93xx_rtc_exit(void)
 {
-	platform_driver_unregister(&ep93xx_rtc_platform_driver);
+	platform_driver_unregister(&ep93xx_rtc_driver);
 }
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index 82615355215..457231bb102 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = {
 	.set_alarm	= pl030_set_alarm,
 };
 
-static int pl030_probe(struct amba_device *dev, void *id)
+static int pl030_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct pl030_rtc *rtc;
 	int ret;
@@ -117,7 +117,7 @@ static int pl030_probe(struct amba_device *dev, void *id)
 		goto err_rtc;
 	}
 
-	rtc->base = ioremap(dev->res.start, SZ_4K);
+	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!rtc->base) {
 		ret = -ENOMEM;
 		goto err_map;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 333eec689d2..f41873f98f6 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev)
 	return 0;
 }
 
-static int pl031_probe(struct amba_device *adev, void *id)
+static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 {
 	int ret;
 	struct pl031_local *ldata;
@@ -142,8 +142,7 @@ static int pl031_probe(struct amba_device *adev, void *id)
 		goto out;
 	}
 
-	ldata->base = ioremap(adev->res.start,
-			      adev->res.end - adev->res.start + 1);
+	ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!ldata->base) {
 		ret = -ENOMEM;
 		goto out_no_remap;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index d1815272c43..442bb98a282 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -603,7 +603,7 @@ static void dasd_profile_end(struct dasd_block *block,
 	if (dasd_profile_level != DASD_PROFILE_ON)
 		return;
 
-	sectors = req->nr_sectors;
+	sectors = blk_rq_sectors(req);
 	if (!cqr->buildclk || !cqr->startclk ||
 	    !cqr->stopclk || !cqr->endclk ||
 	    !sectors)
@@ -851,8 +851,10 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 
 	/* Check the cqr */
 	rc = dasd_check_cqr(cqr);
-	if (rc)
+	if (rc) {
+		cqr->intrc = rc;
 		return rc;
+	}
 	device = (struct dasd_device *) cqr->startdev;
 	if (cqr->retries < 0) {
 		/* internal error 14 - start_IO run out of retries */
@@ -915,6 +917,7 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 		BUG();
 		break;
 	}
+	cqr->intrc = rc;
 	return rc;
 }
 
@@ -1454,8 +1457,12 @@ int dasd_sleep_on(struct dasd_ccw_req *cqr)
 	dasd_add_request_tail(cqr);
 	wait_event(generic_waitq, _wait_for_wakeup(cqr));
 
-	/* Request status is either done or failed. */
-	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+	if (cqr->status == DASD_CQR_DONE)
+		rc = 0;
+	else if (cqr->intrc)
+		rc = cqr->intrc;
+	else
+		rc = -EIO;
 	return rc;
 }
 
@@ -1477,8 +1484,15 @@ int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
 		dasd_cancel_req(cqr);
 		/* wait (non-interruptible) for final status */
 		wait_event(generic_waitq, _wait_for_wakeup(cqr));
+		cqr->intrc = rc;
 	}
-	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+
+	if (cqr->status == DASD_CQR_DONE)
+		rc = 0;
+	else if (cqr->intrc)
+		rc = cqr->intrc;
+	else
+		rc = -EIO;
 	return rc;
 }
 
@@ -1523,8 +1537,12 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
 
 	wait_event(generic_waitq, _wait_for_wakeup(cqr));
 
-	/* Request status is either done or failed. */
-	rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
+	if (cqr->status == DASD_CQR_DONE)
+		rc = 0;
+	else if (cqr->intrc)
+		rc = cqr->intrc;
+	else
+		rc = -EIO;
 	return rc;
 }
 
@@ -1614,15 +1632,6 @@ void dasd_block_clear_timer(struct dasd_block *block)
 }
 
 /*
- * posts the buffer_cache about a finalized request
- */
-static inline void dasd_end_request(struct request *req, int error)
-{
-	if (__blk_end_request(req, error, blk_rq_bytes(req)))
-		BUG();
-}
-
-/*
  * Process finished error recovery ccw.
  */
 static inline void __dasd_block_process_erp(struct dasd_block *block,
@@ -1665,18 +1674,14 @@ static void __dasd_process_request_queue(struct dasd_block *block)
 	if (basedev->state < DASD_STATE_READY)
 		return;
 	/* Now we try to fetch requests from the request queue */
-	while (!blk_queue_plugged(queue) &&
-	       elv_next_request(queue)) {
-
-		req = elv_next_request(queue);
-
+	while (!blk_queue_plugged(queue) && (req = blk_peek_request(queue))) {
 		if (basedev->features & DASD_FEATURE_READONLY &&
 		    rq_data_dir(req) == WRITE) {
 			DBF_DEV_EVENT(DBF_ERR, basedev,
 				      "Rejecting write request %p",
 				      req);
-			blkdev_dequeue_request(req);
-			dasd_end_request(req, -EIO);
+			blk_start_request(req);
+			__blk_end_request_all(req, -EIO);
 			continue;
 		}
 		cqr = basedev->discipline->build_cp(basedev, block, req);
@@ -1704,8 +1709,8 @@ static void __dasd_process_request_queue(struct dasd_block *block)
 				      "CCW creation failed (rc=%ld) "
 				      "on request %p",
 				      PTR_ERR(cqr), req);
-			blkdev_dequeue_request(req);
-			dasd_end_request(req, -EIO);
+			blk_start_request(req);
+			__blk_end_request_all(req, -EIO);
 			continue;
 		}
 		/*
@@ -1714,7 +1719,7 @@ static void __dasd_process_request_queue(struct dasd_block *block)
 		 */
 		cqr->callback_data = (void *) req;
 		cqr->status = DASD_CQR_FILLED;
-		blkdev_dequeue_request(req);
+		blk_start_request(req);
 		list_add_tail(&cqr->blocklist, &block->ccw_queue);
 		dasd_profile_start(block, cqr, req);
 	}
@@ -1731,7 +1736,7 @@ static void __dasd_cleanup_cqr(struct dasd_ccw_req *cqr)
 	status = cqr->block->base->discipline->free_cp(cqr, req);
 	if (status <= 0)
 		error = status ? status : -EIO;
-	dasd_end_request(req, error);
+	__blk_end_request_all(req, error);
 }
 
 /*
@@ -2003,7 +2008,7 @@ static void dasd_setup_queue(struct dasd_block *block)
 {
 	int max;
 
-	blk_queue_hardsect_size(block->request_queue, block->bp_block);
+	blk_queue_logical_block_size(block->request_queue, block->bp_block);
 	max = block->base->discipline->max_blocks << block->s2b_shift;
 	blk_queue_max_sectors(block->request_queue, max);
 	blk_queue_max_phys_segments(block->request_queue, -1L);
@@ -2038,10 +2043,8 @@ static void dasd_flush_request_queue(struct dasd_block *block)
 		return;
 
 	spin_lock_irq(&block->request_queue_lock);
-	while ((req = elv_next_request(block->request_queue))) {
-		blkdev_dequeue_request(req);
-		dasd_end_request(req, -EIO);
-	}
+	while ((req = blk_fetch_request(block->request_queue)))
+		__blk_end_request_all(req, -EIO);
 	spin_unlock_irq(&block->request_queue_lock);
 }
 
@@ -2442,12 +2445,12 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
 
 
 int dasd_generic_read_dev_chars(struct dasd_device *device, char *magic,
-				void **rdc_buffer, int rdc_buffer_size)
+				void *rdc_buffer, int rdc_buffer_size)
 {
 	int ret;
 	struct dasd_ccw_req *cqr;
 
-	cqr = dasd_generic_build_rdc(device, *rdc_buffer, rdc_buffer_size,
+	cqr = dasd_generic_build_rdc(device, rdc_buffer, rdc_buffer_size,
 				     magic);
 	if (IS_ERR(cqr))
 		return PTR_ERR(cqr);
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index b9a7f773344..644086ba2ed 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -202,6 +202,7 @@ dasd_start_diag(struct dasd_ccw_req * cqr)
 		rc = -EIO;
 		break;
 	}
+	cqr->intrc = rc;
 	return rc;
 }
 
@@ -505,8 +506,9 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev,
 		return ERR_PTR(-EINVAL);
 	blksize = block->bp_block;
 	/* Calculate record id of first and last block. */
-	first_rec = req->sector >> block->s2b_shift;
-	last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+	first_rec = blk_rq_pos(req) >> block->s2b_shift;
+	last_rec =
+		(blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
 	/* Check struct bio and count the number of blocks for the request. */
 	count = 0;
 	rq_for_each_segment(bv, req, iter) {
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index cb52da033f0..cf0cfdba124 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1097,20 +1097,20 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private;
 	struct dasd_block *block;
-	void *rdc_data;
 	int is_known, rc;
 
 	private = (struct dasd_eckd_private *) device->private;
-	if (private == NULL) {
-		private = kzalloc(sizeof(struct dasd_eckd_private),
-				  GFP_KERNEL | GFP_DMA);
-		if (private == NULL) {
+	if (!private) {
+		private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
+		if (!private) {
 			dev_warn(&device->cdev->dev,
 				 "Allocating memory for private DASD data "
 				 "failed\n");
 			return -ENOMEM;
 		}
 		device->private = (void *) private;
+	} else {
+		memset(private, 0, sizeof(*private));
 	}
 	/* Invalidate status of initial analysis. */
 	private->init_cqr_status = -1;
@@ -1161,9 +1161,8 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 		goto out_err3;
 
 	/* Read Device Characteristics */
-	rdc_data = (void *) &(private->rdc_data);
-	memset(rdc_data, 0, sizeof(rdc_data));
-	rc = dasd_generic_read_dev_chars(device, "ECKD", &rdc_data, 64);
+	rc = dasd_generic_read_dev_chars(device, "ECKD", &private->rdc_data,
+					 64);
 	if (rc) {
 		DBF_EVENT(DBF_WARNING,
 			  "Read device characteristics failed, rc=%d for "
@@ -1183,7 +1182,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 		 private->rdc_data.dev_model,
 		 private->rdc_data.cu_type,
 		 private->rdc_data.cu_model.model,
-		    private->real_cyl,
+		 private->real_cyl,
 		 private->rdc_data.trk_per_cyl,
 		 private->rdc_data.sec_per_trk);
 	return 0;
@@ -2336,9 +2335,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 {
 	int tpm, cmdrtd, cmdwtd;
 	int use_prefix;
-
-	struct dasd_eckd_private *private;
+#if defined(CONFIG_64BIT)
 	int fcx_in_css, fcx_in_gneq, fcx_in_features;
+#endif
+	struct dasd_eckd_private *private;
 	struct dasd_device *basedev;
 	sector_t first_rec, last_rec;
 	sector_t first_trk, last_trk;
@@ -2354,18 +2354,22 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	blksize = block->bp_block;
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
 	/* Calculate record id of first and last block. */
-	first_rec = first_trk = req->sector >> block->s2b_shift;
+	first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift;
 	first_offs = sector_div(first_trk, blk_per_trk);
 	last_rec = last_trk =
-		(req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+		(blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
 	last_offs = sector_div(last_trk, blk_per_trk);
 	cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk);
 
-	/* is transport mode supported ? */
+	/* is transport mode supported? */
+#if defined(CONFIG_64BIT)
 	fcx_in_css = css_general_characteristics.fcx;
 	fcx_in_gneq = private->gneq->reserved2[7] & 0x04;
 	fcx_in_features = private->features.feature[40] & 0x80;
 	tpm = fcx_in_css && fcx_in_gneq && fcx_in_features;
+#else
+	tpm = 0;
+#endif
 
 	/* is read track data and write track data in command mode supported? */
 	cmdrtd = private->features.feature[9] & 0x20;
@@ -2420,7 +2424,7 @@ dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req)
 	private = (struct dasd_eckd_private *) cqr->block->base->private;
 	blksize = cqr->block->bp_block;
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
-	recid = req->sector >> cqr->block->s2b_shift;
+	recid = blk_rq_pos(req) >> cqr->block->s2b_shift;
 	ccw = cqr->cpaddr;
 	/* Skip over define extent & locate record. */
 	ccw++;
@@ -3013,8 +3017,9 @@ static void dasd_eckd_dump_sense_ccw(struct dasd_device *device,
 		      " I/O status report for device %s:\n",
 		      dev_name(&device->cdev->dev));
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
-		       " in req: %p CS: 0x%02X DS: 0x%02X\n", req,
-		       scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw));
+		       " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n",
+		       req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
+		       scsw_cc(&irb->scsw), req->intrc);
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 		       " device %s: Failing CCW: %p\n",
 		       dev_name(&device->cdev->dev),
@@ -3115,9 +3120,10 @@ static void dasd_eckd_dump_sense_tcw(struct dasd_device *device,
 		      " I/O status report for device %s:\n",
 		      dev_name(&device->cdev->dev));
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
-		       " in req: %p CS: 0x%02X DS: 0x%02X "
+		       " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d "
 		       "fcxs: 0x%02X schxs: 0x%02X\n", req,
 		       scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
+		       scsw_cc(&irb->scsw), req->intrc,
 		       irb->scsw.tm.fcxs, irb->scsw.tm.schxs);
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 		       " device %s: Failing TCW: %p\n",
@@ -3273,8 +3279,14 @@ static struct dasd_discipline dasd_eckd_discipline = {
 static int __init
 dasd_eckd_init(void)
 {
+	int ret;
+
 	ASCEBC(dasd_eckd_discipline.ebcname, 4);
-	return ccw_driver_register(&dasd_eckd_driver);
+	ret = ccw_driver_register(&dasd_eckd_driver);
+	if (!ret)
+		wait_for_device_probe();
+
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index a3eb6fd1467..597c6ffdb9f 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -122,20 +122,20 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	struct dasd_block *block;
 	struct dasd_fba_private *private;
 	struct ccw_device *cdev = device->cdev;
-	void *rdc_data;
 	int rc;
 
 	private = (struct dasd_fba_private *) device->private;
-	if (private == NULL) {
-		private = kzalloc(sizeof(struct dasd_fba_private),
-				  GFP_KERNEL | GFP_DMA);
-		if (private == NULL) {
+	if (!private) {
+		private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
+		if (!private) {
 			dev_warn(&device->cdev->dev,
 				 "Allocating memory for private DASD "
 				 "data failed\n");
 			return -ENOMEM;
 		}
 		device->private = (void *) private;
+	} else {
+		memset(private, 0, sizeof(*private));
 	}
 	block = dasd_alloc_block();
 	if (IS_ERR(block)) {
@@ -150,8 +150,8 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	block->base = device;
 
 	/* Read Device Characteristics */
-	rdc_data = (void *) &(private->rdc_data);
-	rc = dasd_generic_read_dev_chars(device, "FBA ", &rdc_data, 32);
+	rc = dasd_generic_read_dev_chars(device, "FBA ", &private->rdc_data,
+					 32);
 	if (rc) {
 		DBF_EVENT(DBF_WARNING, "Read device characteristics returned "
 			  "error %d for device: %s",
@@ -270,8 +270,9 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
 		return ERR_PTR(-EINVAL);
 	blksize = block->bp_block;
 	/* Calculate record id of first and last block. */
-	first_rec = req->sector >> block->s2b_shift;
-	last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift;
+	first_rec = blk_rq_pos(req) >> block->s2b_shift;
+	last_rec =
+		(blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
 	/* Check struct bio and count the number of blocks for the request. */
 	count = 0;
 	cidaw = 0;
@@ -309,7 +310,7 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
 	ccw = cqr->cpaddr;
 	/* First ccw is define extent. */
 	define_extent(ccw++, cqr->data, rq_data_dir(req),
-		      block->bp_block, req->sector, req->nr_sectors);
+		      block->bp_block, blk_rq_pos(req), blk_rq_sectors(req));
 	/* Build locate_record + read/write ccws. */
 	idaws = (unsigned long *) (cqr->data + sizeof(struct DE_fba_data));
 	LO_data = (struct LO_fba_data *) (idaws + cidaw);
@@ -603,8 +604,14 @@ static struct dasd_discipline dasd_fba_discipline = {
 static int __init
 dasd_fba_init(void)
 {
+	int ret;
+
 	ASCEBC(dasd_fba_discipline.ebcname, 4);
-	return ccw_driver_register(&dasd_fba_driver);
+	ret = ccw_driver_register(&dasd_fba_driver);
+	if (!ret)
+		wait_for_device_probe();
+
+	return ret;
 }
 
 static void __exit
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index c1e487f774c..f97ceb79507 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -173,6 +173,7 @@ struct dasd_ccw_req {
 	void *data;			/* pointer to data area */
 
 	/* these are important for recovering erroneous requests          */
+	int intrc;			/* internal error, e.g. from start_IO */
 	struct irb irb;			/* device status in case of an error */
 	struct dasd_ccw_req *refers;	/* ERP-chain queueing. */
 	void *function; 		/* originating ERP action */
@@ -578,7 +579,7 @@ int dasd_generic_set_offline (struct ccw_device *cdev);
 int dasd_generic_notify(struct ccw_device *, int);
 void dasd_generic_handle_state_change(struct dasd_device *);
 
-int dasd_generic_read_dev_chars(struct dasd_device *, char *, void **, int);
+int dasd_generic_read_dev_chars(struct dasd_device *, char *, void *, int);
 char *dasd_get_sense(struct irb *);
 
 /* externals in dasd_devmap.c */
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index cfdcf1aed33..b21caf177e3 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -127,7 +127,7 @@ dcssblk_assign_free_minor(struct dcssblk_dev_info *dev_info)
 		found = 0;
 		// test if minor available
 		list_for_each_entry(entry, &dcssblk_devices, lh)
-			if (minor == MINOR(disk_devt(entry->gd)))
+			if (minor == entry->gd->first_minor)
 				found++;
 		if (!found) break; // got unused minor
 	}
@@ -602,7 +602,7 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	dev_info->gd->private_data = dev_info;
 	dev_info->gd->driverfs_dev = &dev_info->dev;
 	blk_queue_make_request(dev_info->dcssblk_queue, dcssblk_make_request);
-	blk_queue_hardsect_size(dev_info->dcssblk_queue, 4096);
+	blk_queue_logical_block_size(dev_info->dcssblk_queue, 4096);
 
 	seg_byte_size = (dev_info->end - dev_info->start + 1);
 	set_capacity(dev_info->gd, seg_byte_size >> 9); // size in sectors
@@ -625,7 +625,7 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	if (rc)
 		goto release_gd;
 	sprintf(dev_info->gd->disk_name, "dcssblk%d",
-		MINOR(disk_devt(dev_info->gd)));
+		dev_info->gd->first_minor);
 	list_add_tail(&dev_info->lh, &dcssblk_devices);
 
 	if (!try_module_get(THIS_MODULE)) {
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 76814f3e898..0ae0c83ef87 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -343,7 +343,7 @@ static int __init xpram_setup_blkdev(void)
 			goto out;
 		}
 		blk_queue_make_request(xpram_queues[i], xpram_make_request);
-		blk_queue_hardsect_size(xpram_queues[i], 4096);
+		blk_queue_logical_block_size(xpram_queues[i], 4096);
 	}
 
 	/*
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index d028d2ee83d..ed5396dae58 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -64,7 +64,7 @@ static struct con3270 *condev;
 #define CON_UPDATE_ERASE	1	/* Use EWRITEA instead of WRITE. */
 #define CON_UPDATE_LIST		2	/* Update lines in tty3270->update. */
 #define CON_UPDATE_STATUS	4	/* Update status line. */
-#define CON_UPDATE_ALL		7
+#define CON_UPDATE_ALL		8	/* Recreate screen. */
 
 static void con3270_update(struct con3270 *);
 
@@ -73,18 +73,10 @@ static void con3270_update(struct con3270 *);
  */
 static void con3270_set_timer(struct con3270 *cp, int expires)
 {
-	if (expires == 0) {
-		if (timer_pending(&cp->timer))
-			del_timer(&cp->timer);
-		return;
-	}
-	if (timer_pending(&cp->timer) &&
-	    mod_timer(&cp->timer, jiffies + expires))
-		return;
-	cp->timer.function = (void (*)(unsigned long)) con3270_update;
-	cp->timer.data = (unsigned long) cp;
-	cp->timer.expires = jiffies + expires;
-	add_timer(&cp->timer);
+	if (expires == 0)
+		del_timer(&cp->timer);
+	else
+		mod_timer(&cp->timer, jiffies + expires);
 }
 
 /*
@@ -225,6 +217,12 @@ con3270_update(struct con3270 *cp)
 
 	spin_lock_irqsave(&cp->view.lock, flags);
 	updated = 0;
+	if (cp->update_flags & CON_UPDATE_ALL) {
+		con3270_rebuild_update(cp);
+		con3270_update_status(cp);
+		cp->update_flags = CON_UPDATE_ERASE | CON_UPDATE_LIST |
+			CON_UPDATE_STATUS;
+	}
 	if (cp->update_flags & CON_UPDATE_ERASE) {
 		/* Use erase write alternate to initialize display. */
 		raw3270_request_set_cmd(wrq, TC_EWRITEA);
@@ -302,7 +300,6 @@ con3270_read_tasklet(struct raw3270_request *rrq)
 		deactivate = 1;
 		break;
 	case 0x6d:	/* clear: start from scratch. */
-		con3270_rebuild_update(cp);
 		cp->update_flags = CON_UPDATE_ALL;
 		con3270_set_timer(cp, 1);
 		break;
@@ -382,30 +379,21 @@ con3270_issue_read(struct con3270 *cp)
 static int
 con3270_activate(struct raw3270_view *view)
 {
-	unsigned long flags;
 	struct con3270 *cp;
 
 	cp = (struct con3270 *) view;
-	spin_lock_irqsave(&cp->view.lock, flags);
-	cp->nr_up = 0;
-	con3270_rebuild_update(cp);
-	con3270_update_status(cp);
 	cp->update_flags = CON_UPDATE_ALL;
 	con3270_set_timer(cp, 1);
-	spin_unlock_irqrestore(&cp->view.lock, flags);
 	return 0;
 }
 
 static void
 con3270_deactivate(struct raw3270_view *view)
 {
-	unsigned long flags;
 	struct con3270 *cp;
 
 	cp = (struct con3270 *) view;
-	spin_lock_irqsave(&cp->view.lock, flags);
 	del_timer(&cp->timer);
-	spin_unlock_irqrestore(&cp->view.lock, flags);
 }
 
 static int
@@ -504,6 +492,7 @@ con3270_write(struct console *co, const char *str, unsigned int count)
 			con3270_cline_end(cp);
 	}
 	/* Setup timer to output current console buffer after 1/10 second */
+	cp->nr_up = 0;
 	if (cp->view.dev && !timer_pending(&cp->timer))
 		con3270_set_timer(cp, HZ/10);
 	spin_unlock_irqrestore(&cp->view.lock,flags);
@@ -624,7 +613,8 @@ con3270_init(void)
 
 	INIT_LIST_HEAD(&condev->lines);
 	INIT_LIST_HEAD(&condev->update);
-	init_timer(&condev->timer);
+	setup_timer(&condev->timer, (void (*)(unsigned long)) con3270_update,
+		    (unsigned long) condev);
 	tasklet_init(&condev->readlet, 
 		     (void (*)(unsigned long)) con3270_read_tasklet,
 		     (unsigned long) condev->read);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 5f8e8ef43dd..2d00a383a47 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1134,7 +1134,7 @@ tape_34xx_bread(struct tape_device *device, struct request *req)
 	/* Setup ccws. */
 	request->op = TO_BLOCK;
 	start_block = (struct tape_34xx_block_id *) request->cpdata;
-	start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B;
+	start_block->block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
 	DBF_EVENT(6, "start_block = %i\n", start_block->block);
 
 	ccw = request->cpaddr;
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 823b05bd0dd..c453b2f3e9f 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -633,7 +633,7 @@ tape_3590_bread(struct tape_device *device, struct request *req)
 	struct req_iterator iter;
 
 	DBF_EVENT(6, "xBREDid:");
-	start_block = req->sector >> TAPEBLOCK_HSEC_S2B;
+	start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
 	DBF_EVENT(6, "start_block = %i\n", start_block);
 
 	rq_for_each_segment(bv, req, iter)
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index f32e89e7c4f..47ff695255e 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -74,13 +74,6 @@ tapeblock_trigger_requeue(struct tape_device *device)
  * Post finished request.
  */
 static void
-tapeblock_end_request(struct request *req, int error)
-{
-	if (blk_end_request(req, error, blk_rq_bytes(req)))
-		BUG();
-}
-
-static void
 __tapeblock_end_request(struct tape_request *ccw_req, void *data)
 {
 	struct tape_device *device;
@@ -90,17 +83,17 @@ __tapeblock_end_request(struct tape_request *ccw_req, void *data)
 
 	device = ccw_req->device;
 	req = (struct request *) data;
-	tapeblock_end_request(req, (ccw_req->rc == 0) ? 0 : -EIO);
+	blk_end_request_all(req, (ccw_req->rc == 0) ? 0 : -EIO);
 	if (ccw_req->rc == 0)
 		/* Update position. */
 		device->blk_data.block_position =
-			(req->sector + req->nr_sectors) >> TAPEBLOCK_HSEC_S2B;
+		  (blk_rq_pos(req) + blk_rq_sectors(req)) >> TAPEBLOCK_HSEC_S2B;
 	else
 		/* We lost the position information due to an error. */
 		device->blk_data.block_position = -1;
 	device->discipline->free_bread(ccw_req);
 	if (!list_empty(&device->req_queue) ||
-	    elv_next_request(device->blk_data.request_queue))
+	    blk_peek_request(device->blk_data.request_queue))
 		tapeblock_trigger_requeue(device);
 }
 
@@ -118,7 +111,7 @@ tapeblock_start_request(struct tape_device *device, struct request *req)
 	ccw_req = device->discipline->bread(device, req);
 	if (IS_ERR(ccw_req)) {
 		DBF_EVENT(1, "TBLOCK: bread failed\n");
-		tapeblock_end_request(req, -EIO);
+		blk_end_request_all(req, -EIO);
 		return PTR_ERR(ccw_req);
 	}
 	ccw_req->callback = __tapeblock_end_request;
@@ -131,7 +124,7 @@ tapeblock_start_request(struct tape_device *device, struct request *req)
 		 * Start/enqueueing failed. No retries in
 		 * this case.
 		 */
-		tapeblock_end_request(req, -EIO);
+		blk_end_request_all(req, -EIO);
 		device->discipline->free_bread(ccw_req);
 	}
 
@@ -169,19 +162,16 @@ tapeblock_requeue(struct work_struct *work) {
 	spin_lock_irq(&device->blk_data.request_queue_lock);
 	while (
 		!blk_queue_plugged(queue) &&
-		elv_next_request(queue)   &&
+		(req = blk_fetch_request(queue)) &&
 		nr_queued < TAPEBLOCK_MIN_REQUEUE
 	) {
-		req = elv_next_request(queue);
 		if (rq_data_dir(req) == WRITE) {
 			DBF_EVENT(1, "TBLOCK: Rejecting write request\n");
-			blkdev_dequeue_request(req);
 			spin_unlock_irq(&device->blk_data.request_queue_lock);
-			tapeblock_end_request(req, -EIO);
+			blk_end_request_all(req, -EIO);
 			spin_lock_irq(&device->blk_data.request_queue_lock);
 			continue;
 		}
-		blkdev_dequeue_request(req);
 		nr_queued++;
 		spin_unlock_irq(&device->blk_data.request_queue_lock);
 		rc = tapeblock_start_request(device, req);
@@ -232,7 +222,7 @@ tapeblock_setup_device(struct tape_device * device)
 	if (rc)
 		goto cleanup_queue;
 
-	blk_queue_hardsect_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE);
+	blk_queue_logical_block_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE);
 	blk_queue_max_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC);
 	blk_queue_max_phys_segments(blkdat->request_queue, -1L);
 	blk_queue_max_hw_segments(blkdat->request_queue, -1L);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index a7fe6302c98..38385677c65 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -112,7 +112,7 @@ struct tty3270 {
 #define TTY_UPDATE_LIST		2	/* Update lines in tty3270->update. */
 #define TTY_UPDATE_INPUT	4	/* Update input line. */
 #define TTY_UPDATE_STATUS	8	/* Update status line. */
-#define TTY_UPDATE_ALL		15
+#define TTY_UPDATE_ALL		16	/* Recreate screen. */
 
 static void tty3270_update(struct tty3270 *);
 
@@ -121,19 +121,10 @@ static void tty3270_update(struct tty3270 *);
  */
 static void tty3270_set_timer(struct tty3270 *tp, int expires)
 {
-	if (expires == 0) {
-		if (timer_pending(&tp->timer) && del_timer(&tp->timer))
-			raw3270_put_view(&tp->view);
-		return;
-	}
-	if (timer_pending(&tp->timer) &&
-	    mod_timer(&tp->timer, jiffies + expires))
-		return;
-	raw3270_get_view(&tp->view);
-	tp->timer.function = (void (*)(unsigned long)) tty3270_update;
-	tp->timer.data = (unsigned long) tp;
-	tp->timer.expires = jiffies + expires;
-	add_timer(&tp->timer);
+	if (expires == 0)
+		del_timer(&tp->timer);
+	else
+		mod_timer(&tp->timer, jiffies + expires);
 }
 
 /*
@@ -337,7 +328,6 @@ tty3270_write_callback(struct raw3270_request *rq, void *data)
 	tp = (struct tty3270 *) rq->view;
 	if (rq->rc != 0) {
 		/* Write wasn't successfull. Refresh all. */
-		tty3270_rebuild_update(tp);
 		tp->update_flags = TTY_UPDATE_ALL;
 		tty3270_set_timer(tp, 1);
 	}
@@ -366,6 +356,12 @@ tty3270_update(struct tty3270 *tp)
 
 	spin_lock(&tp->view.lock);
 	updated = 0;
+	if (tp->update_flags & TTY_UPDATE_ALL) {
+		tty3270_rebuild_update(tp);
+		tty3270_update_status(tp);
+		tp->update_flags = TTY_UPDATE_ERASE | TTY_UPDATE_LIST |
+			TTY_UPDATE_INPUT | TTY_UPDATE_STATUS;
+	}
 	if (tp->update_flags & TTY_UPDATE_ERASE) {
 		/* Use erase write alternate to erase display. */
 		raw3270_request_set_cmd(wrq, TC_EWRITEA);
@@ -425,7 +421,6 @@ tty3270_update(struct tty3270 *tp)
 		xchg(&tp->write, wrq);
 	}
 	spin_unlock(&tp->view.lock);
-	raw3270_put_view(&tp->view);
 }
 
 /*
@@ -570,7 +565,6 @@ tty3270_read_tasklet(struct raw3270_request *rrq)
 		tty3270_set_timer(tp, 1);
 	} else if (tp->input->string[0] == 0x6d) {
 		/* Display has been cleared. Redraw. */
-		tty3270_rebuild_update(tp);
 		tp->update_flags = TTY_UPDATE_ALL;
 		tty3270_set_timer(tp, 1);
 	}
@@ -641,22 +635,20 @@ static int
 tty3270_activate(struct raw3270_view *view)
 {
 	struct tty3270 *tp;
-	unsigned long flags;
 
 	tp = (struct tty3270 *) view;
-	spin_lock_irqsave(&tp->view.lock, flags);
-	tp->nr_up = 0;
-	tty3270_rebuild_update(tp);
-	tty3270_update_status(tp);
 	tp->update_flags = TTY_UPDATE_ALL;
 	tty3270_set_timer(tp, 1);
-	spin_unlock_irqrestore(&tp->view.lock, flags);
 	return 0;
 }
 
 static void
 tty3270_deactivate(struct raw3270_view *view)
 {
+	struct tty3270 *tp;
+
+	tp = (struct tty3270 *) view;
+	del_timer(&tp->timer);
 }
 
 static int
@@ -743,6 +735,7 @@ tty3270_free_view(struct tty3270 *tp)
 {
 	int pages;
 
+	del_timer_sync(&tp->timer);
 	kbd_free(tp->kbd);
 	raw3270_request_free(tp->kreset);
 	raw3270_request_free(tp->read);
@@ -889,7 +882,8 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 	INIT_LIST_HEAD(&tp->update);
 	INIT_LIST_HEAD(&tp->rcl_lines);
 	tp->rcl_max = 20;
-	init_timer(&tp->timer);
+	setup_timer(&tp->timer, (void (*)(unsigned long)) tty3270_update,
+		    (unsigned long) tp);
 	tasklet_init(&tp->readlet, 
 		     (void (*)(unsigned long)) tty3270_read_tasklet,
 		     (unsigned long) tp->read);
@@ -1754,14 +1748,6 @@ static const struct tty_operations tty3270_ops = {
 	.set_termios = tty3270_set_termios
 };
 
-static void tty3270_notifier(int index, int active)
-{
-	if (active)
-		tty_register_device(tty3270_driver, index, NULL);
-	else
-		tty_unregister_device(tty3270_driver, index);
-}
-
 /*
  * 3270 tty registration code called from tty_init().
  * Most kernel services (incl. kmalloc) are available at this poimt.
@@ -1796,12 +1782,6 @@ static int __init tty3270_init(void)
 		return ret;
 	}
 	tty3270_driver = driver;
-	ret = raw3270_register_notifier(tty3270_notifier);
-	if (ret) {
-		put_tty_driver(driver);
-		return ret;
-
-	}
 	return 0;
 }
 
@@ -1810,7 +1790,6 @@ tty3270_exit(void)
 {
 	struct tty_driver *driver;
 
-	raw3270_unregister_notifier(tty3270_notifier);
 	driver = tty3270_driver;
 	tty3270_driver = NULL;
 	tty_unregister_driver(driver);
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 2aebb982304..5ec7789bd9d 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -12,6 +12,7 @@
 #define KMSG_COMPONENT "cio"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/ftrace.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -28,7 +29,7 @@
 #include <asm/chpid.h>
 #include <asm/airq.h>
 #include <asm/isc.h>
-#include <asm/cpu.h>
+#include <asm/cputime.h>
 #include <asm/fcx.h>
 #include <asm/nmi.h>
 #include <asm/crw.h>
@@ -626,8 +627,7 @@ out:
  *	    handlers).
  *
  */
-void
-do_IRQ (struct pt_regs *regs)
+void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct tpi_info *tpi_info;
 	struct subchannel *sch;
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 151754d5474..bf0a24af39a 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -114,7 +114,7 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm)
 	struct subchannel *sch;
 	int ret;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
@@ -122,8 +122,6 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm)
 	    cdev->private->state != DEV_STATE_W4SENSE)
 		return -EINVAL;
 	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
 	ret = cio_clear(sch);
 	if (ret == 0)
 		cdev->private->intparm = intparm;
@@ -161,11 +159,9 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa,
 	struct subchannel *sch;
 	int ret;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_VERIFY ||
@@ -339,7 +335,7 @@ int ccw_device_halt(struct ccw_device *cdev, unsigned long intparm)
 	struct subchannel *sch;
 	int ret;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
@@ -347,8 +343,6 @@ int ccw_device_halt(struct ccw_device *cdev, unsigned long intparm)
 	    cdev->private->state != DEV_STATE_W4SENSE)
 		return -EINVAL;
 	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
 	ret = cio_halt(sch);
 	if (ret == 0)
 		cdev->private->intparm = intparm;
@@ -372,11 +366,9 @@ int ccw_device_resume(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
-	if (!cdev)
+	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
-		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE ||
@@ -471,11 +463,11 @@ __u8 ccw_device_get_path_mask(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
-	sch = to_subchannel(cdev->dev.parent);
-	if (!sch)
+	if (!cdev->dev.parent)
 		return 0;
-	else
-		return sch->lpm;
+
+	sch = to_subchannel(cdev->dev.parent);
+	return sch->lpm;
 }
 
 /*
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index accd957454e..d79cf5bf0e6 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -881,42 +881,26 @@ no_handler:
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
 }
 
-static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
-				       int dstat)
+static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
+				      int dstat)
 {
 	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
 
-	if (cstat || (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END))) {
-		DBF_ERROR("EQ:ck con");
-		goto error;
-	}
+	DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
 
-	if (!(dstat & DEV_STAT_DEV_END)) {
-		DBF_ERROR("EQ:no dev");
+	if (cstat)
 		goto error;
-	}
-
-	if (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) {
-		DBF_ERROR("EQ: bad io");
+	if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
 		goto error;
-	}
-	return 0;
+	if (!(dstat & DEV_STAT_DEV_END))
+		goto error;
+	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
+	return;
+
 error:
 	DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
 	DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
-
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
-	return 1;
-}
-
-static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
-				      int dstat)
-{
-	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
-	DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
-	if (!qdio_establish_check_errors(cdev, cstat, dstat))
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
 }
 
 /* qdio interrupt handler */
@@ -946,7 +930,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		}
 	}
 	qdio_irq_check_sense(irq_ptr, irb);
-
 	cstat = irb->scsw.cmd.cstat;
 	dstat = irb->scsw.cmd.dstat;
 
@@ -954,22 +937,19 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	case QDIO_IRQ_STATE_INACTIVE:
 		qdio_establish_handle_irq(cdev, cstat, dstat);
 		break;
-
 	case QDIO_IRQ_STATE_CLEANUP:
 		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 		break;
-
 	case QDIO_IRQ_STATE_ESTABLISHED:
 	case QDIO_IRQ_STATE_ACTIVE:
 		if (cstat & SCHN_STAT_PCI) {
 			qdio_int_handler_pci(irq_ptr);
 			return;
 		}
-		if ((cstat & ~SCHN_STAT_PCI) || dstat) {
+		if (cstat || dstat)
 			qdio_handle_activate_check(cdev, intparm, cstat,
 						   dstat);
-			break;
-		}
+		break;
 	default:
 		WARN_ON(1);
 	}
@@ -1514,7 +1494,7 @@ int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
 
 	if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) ||
 	    (count > QDIO_MAX_BUFFERS_PER_Q) ||
-	    (q_nr > QDIO_MAX_QUEUES_PER_IRQ))
+	    (q_nr >= QDIO_MAX_QUEUES_PER_IRQ))
 		return -EINVAL;
 
 	if (!count)
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index 136d0f0b1e9..eff943923c6 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -25,18 +25,6 @@ struct qdio_perf_stats perf_stats;
 static struct proc_dir_entry *qdio_perf_pde;
 #endif
 
-inline void qdio_perf_stat_inc(atomic_long_t *count)
-{
-	if (qdio_performance_stats)
-		atomic_long_inc(count);
-}
-
-inline void qdio_perf_stat_dec(atomic_long_t *count)
-{
-	if (qdio_performance_stats)
-		atomic_long_dec(count);
-}
-
 /*
  * procfs functions
  */
diff --git a/drivers/s390/cio/qdio_perf.h b/drivers/s390/cio/qdio_perf.h
index 7821ac4fa51..ff4504ce1e3 100644
--- a/drivers/s390/cio/qdio_perf.h
+++ b/drivers/s390/cio/qdio_perf.h
@@ -9,7 +9,6 @@
 #define QDIO_PERF_H
 
 #include <linux/types.h>
-#include <linux/device.h>
 #include <asm/atomic.h>
 
 struct qdio_perf_stats {
@@ -50,10 +49,13 @@ struct qdio_perf_stats {
 extern struct qdio_perf_stats perf_stats;
 extern int qdio_performance_stats;
 
+static inline void qdio_perf_stat_inc(atomic_long_t *count)
+{
+	if (qdio_performance_stats)
+		atomic_long_inc(count);
+}
+
 int qdio_setup_perf_stats(void);
 void qdio_remove_perf_stats(void);
 
-extern void qdio_perf_stat_inc(atomic_long_t *count);
-extern void qdio_perf_stat_dec(atomic_long_t *count);
-
 #endif
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index cbc8566fab7..e38e5d306fa 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -173,8 +173,9 @@ static void kvm_notify(struct virtqueue *vq)
  * this device and sets it up.
  */
 static struct virtqueue *kvm_find_vq(struct virtio_device *vdev,
-				    unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				     unsigned index,
+				     void (*callback)(struct virtqueue *vq),
+				     const char *name)
 {
 	struct kvm_device *kdev = to_kvmdev(vdev);
 	struct kvm_vqconfig *config;
@@ -194,7 +195,7 @@ static struct virtqueue *kvm_find_vq(struct virtio_device *vdev,
 
 	vq = vring_new_virtqueue(config->num, KVM_S390_VIRTIO_RING_ALIGN,
 				 vdev, (void *) config->address,
-				 kvm_notify, callback);
+				 kvm_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto unmap;
@@ -226,6 +227,38 @@ static void kvm_del_vq(struct virtqueue *vq)
 				       KVM_S390_VIRTIO_RING_ALIGN));
 }
 
+static void kvm_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		kvm_del_vq(vq);
+}
+
+static int kvm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[])
+{
+	struct kvm_device *kdev = to_kvmdev(vdev);
+	int i;
+
+	/* We must have this many virtqueues. */
+	if (nvqs > kdev->desc->num_vq)
+		return -ENOENT;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = kvm_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error;
+	}
+	return 0;
+
+error:
+	kvm_del_vqs(vdev);
+	return PTR_ERR(vqs[i]);
+}
+
 /*
  * The config ops structure as defined by virtio config
  */
@@ -237,8 +270,8 @@ static struct virtio_config_ops kvm_vq_configspace_ops = {
 	.get_status = kvm_get_status,
 	.set_status = kvm_set_status,
 	.reset = kvm_reset,
-	.find_vq = kvm_find_vq,
-	.del_vq = kvm_del_vq,
+	.find_vqs = kvm_find_vqs,
+	.del_vqs = kvm_del_vqs,
 };
 
 /*
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index a7745c82b4a..cb909a5b504 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -8,7 +8,7 @@ config LCS
 	   Select this option if you want to use LCS networking on IBM System z.
 	   This device driver supports Token Ring (IEEE 802.5),
 	   FDDI (IEEE 802.7) and Ethernet.
-	   To compile as a module, choose M. The module name is lcs.ko.
+	   To compile as a module, choose M. The module name is lcs.
 	   If you do not know what it is, it's safe to choose Y.
 
 config CTCM
@@ -21,7 +21,7 @@ config CTCM
 	  It also supports virtual CTCs when running under VM.
 	  This driver also supports channel-to-channel MPC SNA devices.
 	  MPC is an SNA protocol device used by Communication Server for Linux.
-	  To compile as a module, choose M. The module name is ctcm.ko.
+	  To compile as a module, choose M. The module name is ctcm.
 	  To compile into the kernel, choose Y.
 	  If you do not need any channel-to-channel connection, choose N.
 
@@ -34,7 +34,7 @@ config NETIUCV
 	  link between VM guests. Using ifconfig a point-to-point connection
 	  can be established to the Linux on IBM System z
 	  running on the other VM guest. To compile as a module, choose M.
-	  The module name is netiucv.ko. If unsure, choose Y.
+	  The module name is netiucv. If unsure, choose Y.
 
 config SMSGIUCV
 	tristate "IUCV special message support (VM only)"
@@ -50,7 +50,7 @@ config CLAW
 	  This driver supports channel attached CLAW devices.
 	  CLAW is Common Link Access for Workstation.  Common devices
           that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
-	  To compile as a module, choose M. The module name is claw.ko.
+	  To compile as a module, choose M. The module name is claw.
 	  To compile into the kernel, choose Y.
 
 config QETH
@@ -65,14 +65,14 @@ config QETH
 	  <http://www.ibm.com/developerworks/linux/linux390>
 
 	  To compile this driver as a module, choose M.
-	  The module name is qeth.ko.
+	  The module name is qeth.
 
 config QETH_L2
         tristate "qeth layer 2 device support"
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 2 mode.
-          To compile as a module, choose M. The module name is qeth_l2.ko.
+          To compile as a module, choose M. The module name is qeth_l2.
           If unsure, choose y.
 
 config QETH_L3
@@ -80,7 +80,7 @@ config QETH_L3
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 3 mode.
-          To compile as a module choose M. The module name is qeth_l3.ko.
+          To compile as a module choose M. The module name is qeth_l3.
           If unsure, choose Y.
 
 config QETH_IPV6
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 733fe3bf628..b2fe5cdbcae 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -11,6 +11,24 @@
 
 #include "zfcp_ext.h"
 
+#define ZFCP_MODEL_PRIV 0x4
+
+static struct ccw_device_id zfcp_ccw_device_id[] = {
+	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
+	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, ZFCP_MODEL_PRIV) },
+	{},
+};
+MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
+
+/**
+ * zfcp_ccw_priv_sch - check if subchannel is privileged
+ * @adapter: Adapter/Subchannel to check
+ */
+int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
+{
+	return adapter->ccw_device->id.dev_model == ZFCP_MODEL_PRIV;
+}
+
 /**
  * zfcp_ccw_probe - probe function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
@@ -176,8 +194,8 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 					"ccnoti4", NULL);
 		break;
 	case CIO_BOXED:
-		dev_warn(&adapter->ccw_device->dev,
-			 "The ccw device did not respond in time.\n");
+		dev_warn(&adapter->ccw_device->dev, "The FCP device "
+			 "did not respond within the specified time\n");
 		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5", NULL);
 		break;
 	}
@@ -199,14 +217,6 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
 	up(&zfcp_data.config_sema);
 }
 
-static struct ccw_device_id zfcp_ccw_device_id[] = {
-	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
-	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x4) }, /* priv. */
-	{},
-};
-
-MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
-
 static struct ccw_driver zfcp_ccw_driver = {
 	.owner       = THIS_MODULE,
 	.name        = "zfcp",
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 0a1a5dd8d01..b99b87ce5a3 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -163,7 +163,7 @@ void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *fsf_req)
 	}
 
 	response->fsf_command = fsf_req->fsf_command;
-	response->fsf_reqid = (unsigned long)fsf_req;
+	response->fsf_reqid = fsf_req->req_id;
 	response->fsf_seqno = fsf_req->seq_no;
 	response->fsf_issued = fsf_req->issued;
 	response->fsf_prot_status = qtcb->prefix.prot_status;
@@ -737,7 +737,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req)
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	strncpy(r->tag, "octc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = (unsigned long)fsf_req;
+	r->fsf_reqid = fsf_req->req_id;
 	r->fsf_seqno = fsf_req->seq_no;
 	r->s_id = fc_host_port_id(adapter->scsi_host);
 	r->d_id = wka_port->d_id;
@@ -773,7 +773,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req)
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	strncpy(r->tag, "rctc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = (unsigned long)fsf_req;
+	r->fsf_reqid = fsf_req->req_id;
 	r->fsf_seqno = fsf_req->seq_no;
 	r->s_id = wka_port->d_id;
 	r->d_id = fc_host_port_id(adapter->scsi_host);
@@ -803,7 +803,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level,
 	spin_lock_irqsave(&adapter->san_dbf_lock, flags);
 	memset(rec, 0, sizeof(*rec));
 	strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
-	rec->fsf_reqid = (unsigned long)fsf_req;
+	rec->fsf_reqid = fsf_req->req_id;
 	rec->fsf_seqno = fsf_req->seq_no;
 	rec->s_id = s_id;
 	rec->d_id = d_id;
@@ -965,7 +965,7 @@ static void zfcp_scsi_dbf_event(const char *tag, const char *tag2, int level,
 						      ZFCP_DBF_SCSI_FCP_SNS_INFO);
 				}
 
-				rec->fsf_reqid = (unsigned long)fsf_req;
+				rec->fsf_reqid = fsf_req->req_id;
 				rec->fsf_seqno = fsf_req->seq_no;
 				rec->fsf_issued = fsf_req->issued;
 			}
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 4c362a9069f..2074d45dbf6 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -47,13 +47,6 @@
 
 /********************* CIO/QDIO SPECIFIC DEFINES *****************************/
 
-/* Adapter Identification Parameters */
-#define ZFCP_CONTROL_UNIT_TYPE  0x1731
-#define ZFCP_CONTROL_UNIT_MODEL 0x03
-#define ZFCP_DEVICE_TYPE        0x1732
-#define ZFCP_DEVICE_MODEL       0x03
-#define ZFCP_DEVICE_MODEL_PRIV	0x04
-
 /* DMQ bug workaround: don't use last SBALE */
 #define ZFCP_MAX_SBALES_PER_SBAL	(QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
 
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index fdc9b4352a6..e50ea465bc2 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -880,6 +880,7 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 				zfcp_port_put(port);
 			return ZFCP_ERP_CONTINUES;
 		}
+		/* fall through */
 	case ZFCP_ERP_STEP_NAMESERVER_LOOKUP:
 		if (!port->d_id)
 			return ZFCP_ERP_FAILED;
@@ -894,8 +895,13 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
 				act->step = ZFCP_ERP_STEP_PORT_CLOSING;
 				return ZFCP_ERP_CONTINUES;
 			}
-		/* fall through otherwise */
 		}
+		if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
+			port->d_id = 0;
+			_zfcp_erp_port_reopen(port, 0, "erpsoc1", NULL);
+			return ZFCP_ERP_EXIT;
+		}
+		/* fall through otherwise */
 	}
 	return ZFCP_ERP_FAILED;
 }
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 2e31b536548..120a9a1c81f 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -27,6 +27,7 @@ extern int zfcp_sg_setup_table(struct scatterlist *, int);
 
 /* zfcp_ccw.c */
 extern int zfcp_ccw_register(void);
+extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
 extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
 
 /* zfcp_cfdc.c */
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 19ae0842047..35493a82d2a 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -116,7 +116,7 @@ static void zfcp_wka_port_put(struct zfcp_wka_port *wka_port)
 {
 	if (atomic_dec_return(&wka_port->refcount) != 0)
 		return;
-	/* wait 10 miliseconds, other reqs might pop in */
+	/* wait 10 milliseconds, other reqs might pop in */
 	schedule_delayed_work(&wka_port->work, HZ / 100);
 }
 
@@ -150,9 +150,14 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 	struct zfcp_port *port;
 
 	read_lock_irqsave(&zfcp_data.config_lock, flags);
-	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list)
+	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
 		if ((port->d_id & range) == (elem->nport_did & range))
 			zfcp_test_link(port);
+		if (!port->d_id)
+			zfcp_erp_port_reopen(port,
+					     ZFCP_STATUS_COMMON_ERP_FAILED,
+					     "fcrscn1", NULL);
+	}
 
 	read_unlock_irqrestore(&zfcp_data.config_lock, flags);
 }
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 74dee32afba..e6dae3744e7 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -526,6 +526,7 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		break;
 	case FSF_TOPO_AL:
 		fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
+		/* fall through */
 	default:
 		dev_err(&adapter->ccw_device->dev,
 			"Unknown or unsupported arbitrated loop "
@@ -897,6 +898,7 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req)
 		switch (fsq->word[0]) {
 		case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 			zfcp_test_link(unit->port);
+			/* fall through */
 		case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 			break;
@@ -993,6 +995,7 @@ static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req)
 		break;
 	case FSF_PORT_HANDLE_NOT_VALID:
 		zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
+		/* fall through */
 	case FSF_GENERIC_COMMAND_REJECTED:
 	case FSF_PAYLOAD_SIZE_MISMATCH:
 	case FSF_REQUEST_SIZE_TOO_LARGE:
@@ -1399,7 +1402,7 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 	struct fsf_plogi *plogi;
 
 	if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
-		return;
+		goto out;
 
 	switch (header->fsf_status) {
 	case FSF_PORT_ALREADY_OPEN:
@@ -1461,6 +1464,9 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	}
+
+out:
+	zfcp_port_put(port);
 }
 
 /**
@@ -1473,6 +1479,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 	struct qdio_buffer_element *sbale;
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	struct zfcp_fsf_req *req;
+	struct zfcp_port *port = erp_action->port;
 	int retval = -EIO;
 
 	spin_lock_bh(&adapter->req_q_lock);
@@ -1493,16 +1500,18 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
 
 	req->handler = zfcp_fsf_open_port_handler;
-	req->qtcb->bottom.support.d_id = erp_action->port->d_id;
-	req->data = erp_action->port;
+	req->qtcb->bottom.support.d_id = port->d_id;
+	req->data = port;
 	req->erp_action = erp_action;
 	erp_action->fsf_req = req;
+	zfcp_port_get(port);
 
 	zfcp_fsf_start_erp_timer(req);
 	retval = zfcp_fsf_req_send(req);
 	if (retval) {
 		zfcp_fsf_req_free(req);
 		erp_action->fsf_req = NULL;
+		zfcp_port_put(port);
 	}
 out:
 	spin_unlock_bh(&adapter->req_q_lock);
@@ -1590,8 +1599,10 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
 	case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
 		dev_warn(&req->adapter->ccw_device->dev,
 			 "Opening WKA port 0x%x failed\n", wka_port->d_id);
+		/* fall through */
 	case FSF_ADAPTER_STATUS_AVAILABLE:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
+		/* fall through */
 	case FSF_ACCESS_DENIED:
 		wka_port->status = ZFCP_WKA_PORT_OFFLINE;
 		break;
@@ -1876,7 +1887,7 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req)
 
 		if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE) &&
 		    (adapter->adapter_features & FSF_FEATURE_LUN_SHARING) &&
-		    (adapter->ccw_device->id.dev_model != ZFCP_DEVICE_MODEL_PRIV)) {
+		    !zfcp_ccw_priv_sch(adapter)) {
 			exclusive = (bottom->lun_access_info &
 					FSF_UNIT_ACCESS_EXCLUSIVE);
 			readwrite = (bottom->lun_access_info &
@@ -2314,7 +2325,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 {
 	struct zfcp_fsf_req *req;
 	struct fcp_cmnd_iu *fcp_cmnd_iu;
-	unsigned int sbtype;
+	unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
 	int real_bytes, retval = -EIO;
 	struct zfcp_adapter *adapter = unit->port->adapter;
 
@@ -2356,11 +2367,9 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 	switch (scsi_cmnd->sc_data_direction) {
 	case DMA_NONE:
 		req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
-		sbtype = SBAL_FLAGS0_TYPE_READ;
 		break;
 	case DMA_FROM_DEVICE:
 		req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ;
-		sbtype = SBAL_FLAGS0_TYPE_READ;
 		fcp_cmnd_iu->rddata = 1;
 		break;
 	case DMA_TO_DEVICE:
@@ -2369,8 +2378,6 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 		fcp_cmnd_iu->wddata = 1;
 		break;
 	case DMA_BIDIRECTIONAL:
-	default:
-		retval = -EIO;
 		goto failed_scsi_cmnd;
 	}
 
@@ -2394,9 +2401,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit,
 					     scsi_sglist(scsi_cmnd),
 					     FSF_MAX_SBALS_PER_REQ);
 	if (unlikely(real_bytes < 0)) {
-		if (req->sbal_number < FSF_MAX_SBALS_PER_REQ)
-			retval = -EIO;
-		else {
+		if (req->sbal_number >= FSF_MAX_SBALS_PER_REQ) {
 			dev_err(&adapter->ccw_device->dev,
 				"Oversize data package, unit 0x%016Lx "
 				"on port 0x%016Lx closed\n",
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index e8fbeaeb5fb..7d0da230eb6 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -12,6 +12,10 @@
 #include "zfcp_ext.h"
 #include <asm/atomic.h>
 
+static unsigned int default_depth = 32;
+module_param_named(queue_depth, default_depth, uint, 0600);
+MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
+
 /* Find start of Sense Information in FCP response unit*/
 char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
 {
@@ -24,6 +28,12 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
 	return fcp_sns_info_ptr;
 }
 
+static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth)
+{
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+	return sdev->queue_depth;
+}
+
 static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 {
 	struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
@@ -34,7 +44,7 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
 {
 	if (sdp->tagged_supported)
-		scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, 32);
+		scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, default_depth);
 	else
 		scsi_adjust_queue_depth(sdp, 0, 1);
 	return 0;
@@ -647,6 +657,7 @@ struct zfcp_data zfcp_data = {
 		.name			 = "zfcp",
 		.module			 = THIS_MODULE,
 		.proc_name		 = "zfcp",
+		.change_queue_depth	 = zfcp_scsi_change_queue_depth,
 		.slave_alloc		 = zfcp_scsi_slave_alloc,
 		.slave_configure	 = zfcp_scsi_slave_configure,
 		.slave_destroy		 = zfcp_scsi_slave_destroy,
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index a85ad05e854..6d465168468 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -186,31 +186,31 @@ static void jsfd_do_request(struct request_queue *q)
 {
 	struct request *req;
 
-	while ((req = elv_next_request(q)) != NULL) {
+	req = blk_fetch_request(q);
+	while (req) {
 		struct jsfd_part *jdp = req->rq_disk->private_data;
-		unsigned long offset = req->sector << 9;
-		size_t len = req->current_nr_sectors << 9;
+		unsigned long offset = blk_rq_pos(req) << 9;
+		size_t len = blk_rq_cur_bytes(req);
+		int err = -EIO;
 
-		if ((offset + len) > jdp->dsize) {
-               		end_request(req, 0);
-			continue;
-		}
+		if ((offset + len) > jdp->dsize)
+			goto end;
 
 		if (rq_data_dir(req) != READ) {
 			printk(KERN_ERR "jsfd: write\n");
-			end_request(req, 0);
-			continue;
+			goto end;
 		}
 
 		if ((jdp->dbase & 0xff000000) != 0x20000000) {
 			printk(KERN_ERR "jsfd: bad base %x\n", (int)jdp->dbase);
-			end_request(req, 0);
-			continue;
+			goto end;
 		}
 
 		jsfd_read(req->buffer, jdp->dbase + offset, len);
-
-		end_request(req, 1);
+		err = 0;
+	end:
+		if (!__blk_end_request_cur(req, err))
+			req = blk_fetch_request(q);
 	}
 }
 
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 8b7983aba8f..36c21b19e5d 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1978,7 +1978,8 @@ static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
 {
 	struct scsi_cmnd *cmd = tw_dev->srb[request_id];
 
-	scsi_dma_unmap(cmd);
+	if (cmd->SCp.phase == TW_PHASE_SGLIST)
+		scsi_dma_unmap(cmd);
 } /* End twa_unmap_scsi_data() */
 
 /* scsi_host_template initializer */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index c03f1d2c9e2..faa0fcfed71 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -6,7 +6,7 @@
    		     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
                      Brad Strand <linux@3ware.com>
 
-   Copyright (C) 1999-2007 3ware Inc.
+   Copyright (C) 1999-2009 3ware Inc.
 
    Kernel compatiblity By: 	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
@@ -1294,7 +1294,8 @@ static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
 {
 	dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
 
-	scsi_dma_unmap(cmd);
+	if (cmd->SCp.phase == TW_PHASE_SGLIST)
+		scsi_dma_unmap(cmd);
 } /* End tw_unmap_scsi_data() */
 
 /* This function will reset a device extension */
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index 8e71e5e122b..a5a2ba2561d 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -6,7 +6,7 @@
    		     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
                      Brad Strand <linux@3ware.com>
 
-   Copyright (C) 1999-2007 3ware Inc.
+   Copyright (C) 1999-2009 3ware Inc.
 
    Kernel compatiblity By:	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8ed2990c826..6a19ed9a119 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -191,20 +191,19 @@ config SCSI_ENCLOSURE
 	  it has an enclosure device.  Selecting this option will just allow
 	  certain enclosure conditions to be reported and is not required.
 
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
-	depends on SCSI
-
 config SCSI_MULTI_LUN
 	bool "Probe all LUNs on each SCSI device"
 	depends on SCSI
 	help
-	  If you have a SCSI device that supports more than one LUN (Logical
-	  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
-	  can say Y here to force the SCSI driver to probe for multiple LUNs.
-	  A SCSI device with multiple LUNs acts logically like multiple SCSI
-	  devices. The vast majority of SCSI devices have only one LUN, and
-	  so most people can say N here. The max_luns boot/module parameter 
-	  allows to override this setting.
+	  Some devices support more than one LUN (Logical Unit Number) in order
+	  to allow access to several media, e.g. CD jukebox, USB card reader,
+	  mobile phone in mass storage mode. This option forces the kernel to
+	  probe for all LUNs by default. This setting can be overriden by
+	  max_luns boot/module parameter. Note that this option does not affect
+	  devices conforming to SCSI-3 or higher as they can explicitely report
+	  their number of LUNs. It is safe to say Y here unless you have one of
+	  those rare devices which reacts in an unexpected way when probed for
+	  multiple LUNs.
 
 config SCSI_CONSTANTS
 	bool "Verbose SCSI error reporting (kernel size +=12K)"
@@ -355,6 +354,7 @@ config ISCSI_TCP
 	 http://open-iscsi.org
 
 source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
 
 config SGIWD93_SCSI
 	tristate "SGI WD93C93 SCSI Driver"
@@ -508,6 +508,7 @@ config SCSI_AIC7XXX_OLD
 
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
 
 config SCSI_DPT_I2O
 	tristate "Adaptec I2O RAID support "
@@ -628,6 +629,17 @@ config FCOE
 	---help---
 	  Fibre Channel over Ethernet module
 
+config FCOE_FNIC
+	tristate "Cisco FNIC Driver"
+	depends on PCI && X86
+	select LIBFC
+	help
+	  This is support for the Cisco PCI-Express FCoE HBA.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/scsi/scsi.txt>.
+	  The module will be called fnic.
+
 config SCSI_DMX3191D
 	tristate "DMX3191D SCSI support"
 	depends on PCI && SCSI
@@ -1039,16 +1051,6 @@ config SCSI_IZIP_SLOW_CTR
 
 	  Generally, saying N is fine.
 
-config SCSI_MVSAS
-	tristate "Marvell 88SE6440 SAS/SATA support"
-	depends on PCI && SCSI
-	select SCSI_SAS_LIBSAS
-	help
-	  This driver supports Marvell SAS/SATA PCI devices.
-
-	  To compiler this driver as a module, choose M here: the module
-	  will be called mvsas.
-
 config SCSI_NCR53C406A
 	tristate "NCR53c406a SCSI support"
 	depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index e7c861ac417..25429ea63d0 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_SCSI_DH)		+= device_handler/
 obj-$(CONFIG_LIBFC)		+= libfc/
 obj-$(CONFIG_LIBFCOE)		+= fcoe/
 obj-$(CONFIG_FCOE)		+= fcoe/
+obj-$(CONFIG_FCOE_FNIC)		+= fnic/
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	libiscsi_tcp.o iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
 obj-$(CONFIG_SCSI_A4000T)	+= 53c700.o	a4000t.o
@@ -125,9 +126,10 @@ obj-$(CONFIG_SCSI_IBMVSCSIS)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_IBMVFC)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_HPTIOP)	+= hptiop.o
 obj-$(CONFIG_SCSI_STEX)		+= stex.o
-obj-$(CONFIG_SCSI_MVSAS)	+= mvsas.o
+obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgb3i/
+obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
 
 obj-$(CONFIG_ARM)		+= arm/
 
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index c889d845868..1cdf09a4779 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -224,7 +224,7 @@ NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
 	return ret;
 }
 
-static int
+static irqreturn_t
 NCR_D700_intr(int irq, void *data)
 {
 	struct NCR_D700_private *p = (struct NCR_D700_private *)data;
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
new file mode 100644
index 00000000000..2fceb19eb27
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -0,0 +1,155 @@
+/* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_CONSTANTS_H_
+#define __57XX_ISCSI_CONSTANTS_H_
+
+/**
+* This file defines HSI constants for the iSCSI flows
+*/
+
+/* iSCSI request op codes */
+#define ISCSI_OPCODE_CLEANUP_REQUEST    (7)
+
+/* iSCSI response/messages op codes */
+#define ISCSI_OPCODE_CLEANUP_RESPONSE 		(0x27)
+#define ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION    (0)
+
+/* iSCSI task types */
+#define ISCSI_TASK_TYPE_READ    (0)
+#define ISCSI_TASK_TYPE_WRITE   (1)
+#define ISCSI_TASK_TYPE_MPATH   (2)
+
+/* initial CQ sequence numbers */
+#define ISCSI_INITIAL_SN    (1)
+
+/* KWQ (kernel work queue) layer codes */
+#define ISCSI_KWQE_LAYER_CODE   (6)
+
+/* KWQ (kernel work queue) request op codes */
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN1 (0)
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN2 (1)
+#define ISCSI_KWQE_OPCODE_UPDATE_CONN   (2)
+#define ISCSI_KWQE_OPCODE_DESTROY_CONN  (3)
+#define ISCSI_KWQE_OPCODE_INIT1         (4)
+#define ISCSI_KWQE_OPCODE_INIT2         (5)
+
+/* KCQ (kernel completion queue) response op codes */
+#define ISCSI_KCQE_OPCODE_OFFLOAD_CONN  (0x10)
+#define ISCSI_KCQE_OPCODE_UPDATE_CONN   (0x12)
+#define ISCSI_KCQE_OPCODE_DESTROY_CONN  (0x13)
+#define ISCSI_KCQE_OPCODE_INIT          (0x14)
+#define ISCSI_KCQE_OPCODE_FW_CLEAN_TASK	(0x15)
+#define ISCSI_KCQE_OPCODE_TCP_RESET     (0x16)
+#define ISCSI_KCQE_OPCODE_TCP_SYN       (0x17)
+#define ISCSI_KCQE_OPCODE_TCP_FIN       (0X18)
+#define ISCSI_KCQE_OPCODE_TCP_ERROR     (0x19)
+#define ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
+#define ISCSI_KCQE_OPCODE_ISCSI_ERROR   (0x21)
+
+/* KCQ (kernel completion queue) completion status */
+#define ISCSI_KCQE_COMPLETION_STATUS_SUCCESS                            (0x0)
+#define ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE                     (0x1)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE                  (0x2)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE                   (0x3)
+#define ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR                          (0x4)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR                        (0x5)
+#define ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR                       (0x6)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_UNEXPECTED_OPCODE     (0xa)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE                (0xb)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN               (0xc)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT                   (0xd)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN                (0xe)
+
+/* Response */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN            (0xf)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T              (0x10)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_IS_ZERO  (0x2c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_TOO_BIG  (0x2d)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0                 (0x11)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1                 (0x12)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2                 (0x13)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3                 (0x14)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4                 (0x15)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5                 (0x16)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6                 (0x17)
+
+/* Data-In */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN        (0x18)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN       (0x19)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO            (0x1a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV          (0x1b)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN                (0x1c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN      (0x1d)
+
+/* R2T */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF            (0x1f)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN                   (0x20)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN                 (0x21)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0 (0x22)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1 (0x23)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED       (0x24)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV           (0x25)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN         (0x26)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO (0x27)
+
+/* TMF */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN        (0x28)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN         (0x29)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN         (0x2a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP   (0x2b)
+
+/* IP/TCP processing errors: */
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT               (0x40)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS                (0x41)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG               (0x42)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_MAX_RTRANS                (0x43)
+
+/* iSCSI licensing errors */
+/* general iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED                (0x50)
+/* additional LOM specific iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED              (0x51)
+
+/* SQ/RQ/CQ DB structure sizes */
+#define ISCSI_SQ_DB_SIZE    (16)
+#define ISCSI_RQ_DB_SIZE    (16)
+#define ISCSI_CQ_DB_SIZE    (80)
+
+#define ISCSI_SQN_TO_NOTIFY_NOT_VALID                                   0xFFFF
+
+/* Page size codes (for flags field in connection offload request) */
+#define ISCSI_PAGE_SIZE_256     (0)
+#define ISCSI_PAGE_SIZE_512     (1)
+#define ISCSI_PAGE_SIZE_1K      (2)
+#define ISCSI_PAGE_SIZE_2K      (3)
+#define ISCSI_PAGE_SIZE_4K      (4)
+#define ISCSI_PAGE_SIZE_8K      (5)
+#define ISCSI_PAGE_SIZE_16K     (6)
+#define ISCSI_PAGE_SIZE_32K     (7)
+#define ISCSI_PAGE_SIZE_64K     (8)
+#define ISCSI_PAGE_SIZE_128K    (9)
+#define ISCSI_PAGE_SIZE_256K    (10)
+#define ISCSI_PAGE_SIZE_512K    (11)
+#define ISCSI_PAGE_SIZE_1M      (12)
+#define ISCSI_PAGE_SIZE_2M      (13)
+#define ISCSI_PAGE_SIZE_4M      (14)
+#define ISCSI_PAGE_SIZE_8M      (15)
+
+/* Iscsi PDU related defines */
+#define ISCSI_HEADER_SIZE   (48)
+#define ISCSI_DIGEST_SHIFT  (2)
+#define ISCSI_DIGEST_SIZE   (4)
+
+#define B577XX_ISCSI_CONNECTION_TYPE    3
+
+#endif /*__57XX_ISCSI_CONSTANTS_H_ */
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
new file mode 100644
index 00000000000..36af1afef9b
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -0,0 +1,1509 @@
+/* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_HSI_LINUX_LE__
+#define __57XX_ISCSI_HSI_LINUX_LE__
+
+/*
+ * iSCSI Async CQE
+ */
+struct bnx2i_async_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u8 async_event;
+	u8 async_vcode;
+	u16 param1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 param1;
+	u8 async_vcode;
+	u8 async_event;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 param2;
+	u16 param3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 param3;
+	u16 param2;
+#endif
+	u32 reserved7[3];
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Buffer Descriptor (BD)
+ */
+struct iscsi_bd {
+	u32 buffer_addr_hi;
+	u32 buffer_addr_lo;
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 buffer_length;
+#elif defined(__LITTLE_ENDIAN)
+	u16 buffer_length;
+	u16 reserved0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+#elif defined(__LITTLE_ENDIAN)
+	u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+	u16 reserved3;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup SQ WQE
+ */
+struct bnx2i_cleanup_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+	u16 reserved3;
+#endif
+	u32 reserved4[10];
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup CQE
+ */
+struct bnx2i_cleanup_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 status;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 status;
+	u8 op_code;
+#endif
+	u32 reserved1[3];
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[7];
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+	u16 reserved6;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * SCSI read/write SQ WQE
+ */
+struct bnx2i_cmd_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ud_buffer_offset;
+	u16 sd_buffer_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sd_buffer_offset;
+	u16 ud_buffer_offset;
+#endif
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+	u32 total_data_transfer_length;
+	u32 cmd_sn;
+	u32 reserved3;
+	u32 cdb[4];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 sd_start_bd_index;
+	u8 ud_start_bd_index;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 ud_start_bd_index;
+	u8 sd_start_bd_index;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * task statistics for write response
+ */
+struct bnx2i_write_resp_task_stat {
+	u32 num_data_ins;
+};
+
+/*
+ * task statistics for read response
+ */
+struct bnx2i_read_resp_task_stat {
+#if defined(__BIG_ENDIAN)
+	u16 num_data_outs;
+	u16 num_r2ts;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_r2ts;
+	u16 num_data_outs;
+#endif
+};
+
+/*
+ * task statistics for iSCSI cmd response
+ */
+union bnx2i_cmd_resp_task_stat {
+	struct bnx2i_write_resp_task_stat write_stat;
+	struct bnx2i_read_resp_task_stat read_stat;
+};
+
+/*
+ * SCSI Command CQE
+ */
+struct bnx2i_cmd_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+	u8 response;
+	u8 status;
+#elif defined(__LITTLE_ENDIAN)
+	u8 status;
+	u8 response;
+	u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved2;
+	u32 residual_count;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[5];
+	union bnx2i_cmd_resp_task_stat task_stat;
+	u32 reserved6;
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+
+
+/*
+ * firmware middle-path request SQ WQE
+ */
+struct bnx2i_fw_mp_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+	u16 hdr_opaque1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hdr_opaque1;
+	u8 op_attr;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 hdr_opaque2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+	u16 reserved0;
+#endif
+	u32 hdr_opaque3[4];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 reserved3;
+	u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+	u8 reserved3;
+	u16 reserved4;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u8 reserved5;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * firmware response - CQE: used only by firmware
+ */
+struct bnx2i_fw_response {
+	u32 hdr_dword1[2];
+	u32 hdr_exp_cmd_sn;
+	u32 hdr_max_cmd_sn;
+	u32 hdr_ttt;
+	u32 hdr_res_cnt;
+	u32 cqe_flags;
+#define ISCSI_FW_RESPONSE_RESERVED2 (0xFF<<0)
+#define ISCSI_FW_RESPONSE_RESERVED2_SHIFT 0
+#define ISCSI_FW_RESPONSE_ERR_CODE (0xFF<<8)
+#define ISCSI_FW_RESPONSE_ERR_CODE_SHIFT 8
+#define ISCSI_FW_RESPONSE_RESERVED3 (0xFFFF<<16)
+#define ISCSI_FW_RESPONSE_RESERVED3_SHIFT 16
+	u32 stat_sn;
+	u32 hdr_dword2[2];
+	u32 hdr_dword3[2];
+	u32 task_stat;
+	u32 reserved0;
+	u32 hdr_itt;
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI KCQ CQE parameters
+ */
+union iscsi_kcqe_params {
+	u32 reserved0[4];
+};
+
+/*
+ * iSCSI KCQ CQE
+ */
+struct iscsi_kcqe {
+	u32 iscsi_conn_id;
+	u32 completion_status;
+	u32 iscsi_conn_context_id;
+	union iscsi_kcqe_params params;
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+#endif
+};
+
+
+
+/*
+ * iSCSI KWQE header
+ */
+struct iscsi_kwqe_header {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+	u8 op_code;
+#elif defined(__LITTLE_ENDIAN)
+	u8 op_code;
+	u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * iSCSI firmware init request 1
+ */
+struct iscsi_kwqe_init1 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u8 reserved0;
+	u8 num_cqs;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_cqs;
+	u8 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 dummy_buffer_addr_lo;
+	u32 dummy_buffer_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 num_ccells_per_conn;
+	u16 num_tasks_per_conn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_tasks_per_conn;
+	u16 num_ccells_per_conn;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 sq_wqes_per_page;
+	u16 sq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_wqes;
+	u16 sq_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cq_log_wqes_per_page;
+	u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+	u16 cq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cq_num_wqes;
+	u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+	u8 cq_log_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cq_num_pages;
+	u16 sq_num_pages;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_pages;
+	u16 cq_num_pages;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 rq_buffer_size;
+	u16 rq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rq_num_wqes;
+	u16 rq_buffer_size;
+#endif
+};
+
+/*
+ * iSCSI firmware init request 2
+ */
+struct iscsi_kwqe_init2 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 max_cq_sqn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 max_cq_sqn;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 error_bit_map[2];
+	u32 reserved1[5];
+};
+
+/*
+ * Initial iSCSI connection offload request 1
+ */
+struct iscsi_kwqe_conn_offload1 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 sq_page_table_addr_lo;
+	u32 sq_page_table_addr_hi;
+	u32 cq_page_table_addr_lo;
+	u32 cq_page_table_addr_hi;
+	u32 reserved0[3];
+};
+
+/*
+ * iSCSI Page Table Entry (PTE)
+ */
+struct iscsi_pte {
+	u32 hi;
+	u32 lo;
+};
+
+/*
+ * Initial iSCSI connection offload request 2
+ */
+struct iscsi_kwqe_conn_offload2 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 rq_page_table_addr_lo;
+	u32 rq_page_table_addr_hi;
+	struct iscsi_pte sq_first_pte;
+	struct iscsi_pte cq_first_pte;
+	u32 num_additional_wqes;
+};
+
+
+/*
+ * Initial iSCSI connection offload request 3
+ */
+struct iscsi_kwqe_conn_offload3 {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 reserved1;
+	struct iscsi_pte qp_first_pte[3];
+};
+
+
+/*
+ * iSCSI connection update request
+ */
+struct iscsi_kwqe_conn_update {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 session_error_recovery_level;
+	u8 max_outstanding_r2ts;
+	u8 reserved2;
+	u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+#elif defined(__LITTLE_ENDIAN)
+	u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+	u8 reserved2;
+	u8 max_outstanding_r2ts;
+	u8 session_error_recovery_level;
+#endif
+	u32 context_id;
+	u32 max_send_pdu_length;
+	u32 max_recv_pdu_length;
+	u32 first_burst_length;
+	u32 max_burst_length;
+	u32 exp_stat_sn;
+};
+
+/*
+ * iSCSI destroy connection request
+ */
+struct iscsi_kwqe_conn_destroy {
+#if defined(__BIG_ENDIAN)
+	struct iscsi_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct iscsi_kwqe_header hdr;
+#endif
+	u32 context_id;
+	u32 reserved1[6];
+};
+
+/*
+ * iSCSI KWQ WQE
+ */
+union iscsi_kwqe {
+	struct iscsi_kwqe_init1 init1;
+	struct iscsi_kwqe_init2 init2;
+	struct iscsi_kwqe_conn_offload1 conn_offload1;
+	struct iscsi_kwqe_conn_offload2 conn_offload2;
+	struct iscsi_kwqe_conn_update conn_update;
+	struct iscsi_kwqe_conn_destroy conn_destroy;
+};
+
+/*
+ * iSCSI Login SQ WQE
+ */
+struct bnx2i_login_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+	u8 version_max;
+	u8 version_min;
+#elif defined(__LITTLE_ENDIAN)
+	u8 version_min;
+	u8 version_max;
+	u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+	u16 isid_hi;
+	u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tsih;
+	u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cid;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 cid;
+#endif
+	u32 cmd_sn;
+	u32 exp_stat_sn;
+	u32 reserved4;
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved8;
+	u8 reserved7;
+	u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+	u8 reserved7;
+	u16 reserved8;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved10;
+	u8 reserved9;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved9;
+	u8 reserved10;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Login CQE
+ */
+struct bnx2i_login_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+	u8 version_max;
+	u8 version_active;
+#elif defined(__LITTLE_ENDIAN)
+	u8 version_active;
+	u8 version_max;
+	u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u8 err_code;
+	u8 reserved2;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved2;
+	u8 err_code;
+	u16 reserved3;
+#endif
+	u32 stat_sn;
+	u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+	u16 isid_hi;
+	u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tsih;
+	u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 status_class;
+	u8 status_detail;
+	u16 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved4;
+	u8 status_detail;
+	u8 status_class;
+#endif
+	u32 reserved5[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+	u16 reserved6;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Logout SQ WQE
+ */
+struct bnx2i_logout_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cid;
+	u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved3;
+	u16 cid;
+#endif
+	u32 cmd_sn;
+	u32 reserved4[5];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved6;
+	u8 reserved5;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved5;
+	u8 reserved6;
+	u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Logout CQE
+ */
+struct bnx2i_logout_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 response;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 response;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6[3];
+#if defined(__BIG_ENDIAN)
+	u16 time_to_wait;
+	u16 time_to_retain;
+#elif defined(__LITTLE_ENDIAN)
+	u16 time_to_retain;
+	u16 time_to_wait;
+#endif
+	u32 reserved7[3];
+#if defined(__BIG_ENDIAN)
+	u16 reserved8;
+	u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+	u16 reserved8;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Nop-In CQE
+ */
+struct bnx2i_nop_in_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 ttt;
+	u32 reserved2;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5;
+	u32 lun[2];
+	u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI NOP-OUT SQ WQE
+ */
+struct bnx2i_nop_out_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved2;
+	u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+	u16 reserved2;
+#endif
+	u32 ttt;
+	u32 cmd_sn;
+	u32 reserved3[2];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u8 reserved6;
+	u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+#elif defined(__LITTLE_ENDIAN)
+	u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+	u8 reserved6;
+	u16 reserved7;
+#endif
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved9;
+	u8 reserved8;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved8;
+	u8 reserved9;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Reject CQE
+ */
+struct bnx2i_reject_msg {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 reason;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 reason;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5[8];
+	u32 cq_req_sn;
+};
+
+/*
+ * bnx2i iSCSI TMF SQ WQE
+ */
+struct bnx2i_tmf_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+	u16 reserved1;
+#endif
+	u32 ref_itt;
+	u32 cmd_sn;
+	u32 reserved2;
+	u32 ref_cmd_sn;
+	u32 reserved3[3];
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved5;
+	u8 reserved4;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved4;
+	u8 reserved5;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Text SQ WQE
+ */
+struct bnx2i_text_request {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 lun[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+	u16 reserved3;
+#endif
+	u32 ttt;
+	u32 cmd_sn;
+	u32 reserved4[2];
+	u32 resp_bd_list_addr_lo;
+	u32 resp_bd_list_addr_hi;
+	u32 resp_buffer;
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT 24
+	u32 zero_fill;
+	u32 bd_list_addr_lo;
+	u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u8 cq_index;
+	u8 reserved7;
+	u8 reserved6;
+	u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+	u8 num_bds;
+	u8 reserved6;
+	u8 reserved7;
+	u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI SQ WQE
+ */
+union iscsi_request {
+	struct bnx2i_cmd_request cmd;
+	struct bnx2i_tmf_request tmf;
+	struct bnx2i_nop_out_request nop_out;
+	struct bnx2i_login_request login_req;
+	struct bnx2i_text_request text;
+	struct bnx2i_logout_request logout_req;
+	struct bnx2i_cleanup_request cleanup;
+};
+
+
+/*
+ * iSCSI TMF CQE
+ */
+struct bnx2i_tmf_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 reserved1;
+	u8 response;
+	u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved0;
+	u8 response;
+	u8 reserved1;
+	u8 op_code;
+#endif
+	u32 reserved2;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+	u16 reserved5;
+	u8 err_code;
+	u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved4;
+	u8 err_code;
+	u16 reserved5;
+#endif
+	u32 reserved6[7];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+/*
+ * iSCSI Text CQE
+ */
+struct bnx2i_text_response {
+#if defined(__BIG_ENDIAN)
+	u8 op_code;
+	u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+	u8 op_code;
+#endif
+	u32 data_length;
+	u32 exp_cmd_sn;
+	u32 max_cmd_sn;
+	u32 ttt;
+	u32 reserved2;
+#if defined(__BIG_ENDIAN)
+	u16 reserved4;
+	u8 err_code;
+	u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 reserved3;
+	u8 err_code;
+	u16 reserved4;
+#endif
+	u32 reserved5;
+	u32 lun[2];
+	u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved7;
+	u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+	u16 reserved7;
+#endif
+	u32 cq_req_sn;
+};
+
+/*
+ * iSCSI CQE
+ */
+union iscsi_response {
+	struct bnx2i_cmd_response cmd;
+	struct bnx2i_tmf_response tmf;
+	struct bnx2i_login_response login_resp;
+	struct bnx2i_text_response text;
+	struct bnx2i_logout_response logout_resp;
+	struct bnx2i_cleanup_response cleanup;
+	struct bnx2i_reject_msg reject;
+	struct bnx2i_async_msg async;
+	struct bnx2i_nop_in_msg nop_in;
+};
+
+#endif /* __57XX_ISCSI_HSI_LINUX_LE__ */
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
new file mode 100644
index 00000000000..820d428ae83
--- /dev/null
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -0,0 +1,7 @@
+config SCSI_BNX2_ISCSI
+	tristate "Broadcom NetXtreme II iSCSI support"
+	select SCSI_ISCSI_ATTRS
+	select CNIC
+	---help---
+	This driver supports iSCSI offload for the Broadcom NetXtreme II
+	devices.
diff --git a/drivers/scsi/bnx2i/Makefile b/drivers/scsi/bnx2i/Makefile
new file mode 100644
index 00000000000..b5802bd2e76
--- /dev/null
+++ b/drivers/scsi/bnx2i/Makefile
@@ -0,0 +1,3 @@
+bnx2i-y := bnx2i_init.o bnx2i_hwi.o bnx2i_iscsi.o bnx2i_sysfs.o
+
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += bnx2i.o
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
new file mode 100644
index 00000000000..d7576f28c6e
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -0,0 +1,771 @@
+/* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#ifndef _BNX2I_H_
+#define _BNX2I_H_
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/kfifo.h>
+#include <linux/netdevice.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "../../net/cnic_if.h"
+#include "57xx_iscsi_hsi.h"
+#include "57xx_iscsi_constants.h"
+
+#define BNX2_ISCSI_DRIVER_NAME		"bnx2i"
+
+#define BNX2I_MAX_ADAPTERS		8
+
+#define ISCSI_MAX_CONNS_PER_HBA		128
+#define ISCSI_MAX_SESS_PER_HBA		ISCSI_MAX_CONNS_PER_HBA
+#define ISCSI_MAX_CMDS_PER_SESS		128
+
+/* Total active commands across all connections supported by devices */
+#define ISCSI_MAX_CMDS_PER_HBA_5708	(28 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_5709	(128 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_57710	(256 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+
+#define ISCSI_MAX_BDS_PER_CMD		32
+
+#define MAX_PAGES_PER_CTRL_STRUCT_POOL	8
+#define BNX2I_RESERVED_SLOW_PATH_CMD_SLOTS	4
+
+/* 5706/08 hardware has limit on maximum buffer size per BD it can handle */
+#define MAX_BD_LENGTH			65535
+#define BD_SPLIT_SIZE			32768
+
+/* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */
+#define BNX2I_SQ_WQES_MIN 		16
+#define BNX2I_570X_SQ_WQES_MAX 		128
+#define BNX2I_5770X_SQ_WQES_MAX 	512
+#define BNX2I_570X_SQ_WQES_DEFAULT 	128
+#define BNX2I_5770X_SQ_WQES_DEFAULT 	256
+
+#define BNX2I_570X_CQ_WQES_MAX 		128
+#define BNX2I_5770X_CQ_WQES_MAX 	512
+
+#define BNX2I_RQ_WQES_MIN 		16
+#define BNX2I_RQ_WQES_MAX 		32
+#define BNX2I_RQ_WQES_DEFAULT 		16
+
+/* CCELLs per conn */
+#define BNX2I_CCELLS_MIN		16
+#define BNX2I_CCELLS_MAX		96
+#define BNX2I_CCELLS_DEFAULT		64
+
+#define ITT_INVALID_SIGNATURE		0xFFFF
+
+#define ISCSI_CMD_CLEANUP_TIMEOUT	100
+
+#define BNX2I_CONN_CTX_BUF_SIZE		16384
+
+#define BNX2I_SQ_WQE_SIZE		64
+#define BNX2I_RQ_WQE_SIZE		256
+#define BNX2I_CQE_SIZE			64
+
+#define MB_KERNEL_CTX_SHIFT		8
+#define MB_KERNEL_CTX_SIZE		(1 << MB_KERNEL_CTX_SHIFT)
+
+#define CTX_SHIFT			7
+#define GET_CID_NUM(cid_addr)		((cid_addr) >> CTX_SHIFT)
+
+#define CTX_OFFSET 			0x10000
+#define MAX_CID_CNT			0x4000
+
+/* 5709 context registers */
+#define BNX2_MQ_CONFIG2			0x00003d00
+#define BNX2_MQ_CONFIG2_CONT_SZ		(0x7L<<4)
+#define BNX2_MQ_CONFIG2_FIRST_L4L5	(0x1fL<<8)
+
+/* 57710's BAR2 is mapped to doorbell registers */
+#define BNX2X_DOORBELL_PCI_BAR		2
+#define BNX2X_MAX_CQS			8
+
+#define CNIC_ARM_CQE			1
+#define CNIC_DISARM_CQE			0
+
+#define REG_RD(__hba, offset)				\
+		readl(__hba->regview + offset)
+#define REG_WR(__hba, offset, val)			\
+		writel(val, __hba->regview + offset)
+
+
+/**
+ * struct generic_pdu_resc - login pdu resource structure
+ *
+ * @req_buf:            driver buffer used to stage payload associated with
+ *                      the login request
+ * @req_dma_addr:       dma address for iscsi login request payload buffer
+ * @req_buf_size:       actual login request payload length
+ * @req_wr_ptr:         pointer into login request buffer when next data is
+ *                      to be written
+ * @resp_hdr:           iscsi header where iscsi login response header is to
+ *                      be recreated
+ * @resp_buf:           buffer to stage login response payload
+ * @resp_dma_addr:      login response payload buffer dma address
+ * @resp_buf_size:      login response paylod length
+ * @resp_wr_ptr:        pointer into login response buffer when next data is
+ *                      to be written
+ * @req_bd_tbl:         iscsi login request payload BD table
+ * @req_bd_dma:         login request BD table dma address
+ * @resp_bd_tbl:        iscsi login response payload BD table
+ * @resp_bd_dma:        login request BD table dma address
+ *
+ * following structure defines buffer info for generic pdus such as iSCSI Login,
+ *	Logout and NOP
+ */
+struct generic_pdu_resc {
+	char *req_buf;
+	dma_addr_t req_dma_addr;
+	u32 req_buf_size;
+	char *req_wr_ptr;
+	struct iscsi_hdr resp_hdr;
+	char *resp_buf;
+	dma_addr_t resp_dma_addr;
+	u32 resp_buf_size;
+	char *resp_wr_ptr;
+	char *req_bd_tbl;
+	dma_addr_t req_bd_dma;
+	char *resp_bd_tbl;
+	dma_addr_t resp_bd_dma;
+};
+
+
+/**
+ * struct bd_resc_page - tracks DMA'able memory allocated for BD tables
+ *
+ * @link:               list head to link elements
+ * @max_ptrs:           maximun pointers that can be stored in this page
+ * @num_valid:          number of pointer valid in this page
+ * @page:               base addess for page pointer array
+ *
+ * structure to track DMA'able memory allocated for command BD tables
+ */
+struct bd_resc_page {
+	struct list_head link;
+	u32 max_ptrs;
+	u32 num_valid;
+	void *page[1];
+};
+
+
+/**
+ * struct io_bdt - I/O buffer destricptor table
+ *
+ * @bd_tbl:             BD table's virtual address
+ * @bd_tbl_dma:         BD table's dma address
+ * @bd_valid:           num valid BD entries
+ *
+ * IO BD table
+ */
+struct io_bdt {
+	struct iscsi_bd *bd_tbl;
+	dma_addr_t bd_tbl_dma;
+	u16 bd_valid;
+};
+
+
+/**
+ * bnx2i_cmd - iscsi command structure
+ *
+ * @scsi_cmd:           SCSI-ML task pointer corresponding to this iscsi cmd
+ * @sg:                 SG list
+ * @io_tbl:             buffer descriptor (BD) table
+ * @bd_tbl_dma:         buffer descriptor (BD) table's dma address
+ */
+struct bnx2i_cmd {
+	struct iscsi_hdr hdr;
+	struct bnx2i_conn *conn;
+	struct scsi_cmnd *scsi_cmd;
+	struct scatterlist *sg;
+	struct io_bdt io_tbl;
+	dma_addr_t bd_tbl_dma;
+	struct bnx2i_cmd_request req;
+};
+
+
+/**
+ * struct bnx2i_conn - iscsi connection structure
+ *
+ * @cls_conn:              pointer to iscsi cls conn
+ * @hba:                   adapter structure pointer
+ * @iscsi_conn_cid:        iscsi conn id
+ * @fw_cid:                firmware iscsi context id
+ * @ep:                    endpoint structure pointer
+ * @gen_pdu:               login/nopout/logout pdu resources
+ * @violation_notified:    bit mask used to track iscsi error/warning messages
+ *                         already printed out
+ *
+ * iSCSI connection structure
+ */
+struct bnx2i_conn {
+	struct iscsi_cls_conn *cls_conn;
+	struct bnx2i_hba *hba;
+	struct completion cmd_cleanup_cmpl;
+	int is_bound;
+
+	u32 iscsi_conn_cid;
+#define BNX2I_CID_RESERVED	0x5AFF
+	u32 fw_cid;
+
+	struct timer_list poll_timer;
+	/*
+	 * Queue Pair (QP) related structure elements.
+	 */
+	struct bnx2i_endpoint *ep;
+
+	/*
+	 * Buffer for login negotiation process
+	 */
+	struct generic_pdu_resc gen_pdu;
+	u64 violation_notified;
+};
+
+
+
+/**
+ * struct iscsi_cid_queue - Per adapter iscsi cid queue
+ *
+ * @cid_que_base:           queue base memory
+ * @cid_que:                queue memory pointer
+ * @cid_q_prod_idx:         produce index
+ * @cid_q_cons_idx:         consumer index
+ * @cid_q_max_idx:          max index. used to detect wrap around condition
+ * @cid_free_cnt:           queue size
+ * @conn_cid_tbl:           iscsi cid to conn structure mapping table
+ *
+ * Per adapter iSCSI CID Queue
+ */
+struct iscsi_cid_queue {
+	void *cid_que_base;
+	u32 *cid_que;
+	u32 cid_q_prod_idx;
+	u32 cid_q_cons_idx;
+	u32 cid_q_max_idx;
+	u32 cid_free_cnt;
+	struct bnx2i_conn **conn_cid_tbl;
+};
+
+/**
+ * struct bnx2i_hba - bnx2i adapter structure
+ *
+ * @link:                  list head to link elements
+ * @cnic:                  pointer to cnic device
+ * @pcidev:                pointer to pci dev
+ * @netdev:                pointer to netdev structure
+ * @regview:               mapped PCI register space
+ * @age:                   age, incremented by every recovery
+ * @cnic_dev_type:         cnic device type, 5706/5708/5709/57710
+ * @mail_queue_access:     mailbox queue access mode, applicable to 5709 only
+ * @reg_with_cnic:         indicates whether the device is register with CNIC
+ * @adapter_state:         adapter state, UP, GOING_DOWN, LINK_DOWN
+ * @mtu_supported:         Ethernet MTU supported
+ * @shost:                 scsi host pointer
+ * @max_sqes:              SQ size
+ * @max_rqes:              RQ size
+ * @max_cqes:              CQ size
+ * @num_ccell:             number of command cells per connection
+ * @ofld_conns_active:     active connection list
+ * @max_active_conns:      max offload connections supported by this device
+ * @cid_que:               iscsi cid queue
+ * @ep_rdwr_lock:          read / write lock to synchronize various ep lists
+ * @ep_ofld_list:          connection list for pending offload completion
+ * @ep_destroy_list:       connection list for pending offload completion
+ * @mp_bd_tbl:             BD table to be used with middle path requests
+ * @mp_bd_dma:             DMA address of 'mp_bd_tbl' memory buffer
+ * @dummy_buffer:          Dummy buffer to be used with zero length scsicmd reqs
+ * @dummy_buf_dma:         DMA address of 'dummy_buffer' memory buffer
+ * @lock:              	   lock to synchonize access to hba structure
+ * @pci_did:               PCI device ID
+ * @pci_vid:               PCI vendor ID
+ * @pci_sdid:              PCI subsystem device ID
+ * @pci_svid:              PCI subsystem vendor ID
+ * @pci_func:              PCI function number in system pci tree
+ * @pci_devno:             PCI device number in system pci tree
+ * @num_wqe_sent:          statistic counter, total wqe's sent
+ * @num_cqe_rcvd:          statistic counter, total cqe's received
+ * @num_intr_claimed:      statistic counter, total interrupts claimed
+ * @link_changed_count:    statistic counter, num of link change notifications
+ *                         received
+ * @ipaddr_changed_count:  statistic counter, num times IP address changed while
+ *                         at least one connection is offloaded
+ * @num_sess_opened:       statistic counter, total num sessions opened
+ * @num_conn_opened:       statistic counter, total num conns opened on this hba
+ * @ctx_ccell_tasks:       captures number of ccells and tasks supported by
+ *                         currently offloaded connection, used to decode
+ *                         context memory
+ *
+ * Adapter Data Structure
+ */
+struct bnx2i_hba {
+	struct list_head link;
+	struct cnic_dev *cnic;
+	struct pci_dev *pcidev;
+	struct net_device *netdev;
+	void __iomem *regview;
+
+	u32 age;
+	unsigned long cnic_dev_type;
+		#define BNX2I_NX2_DEV_5706		0x0
+		#define BNX2I_NX2_DEV_5708		0x1
+		#define BNX2I_NX2_DEV_5709		0x2
+		#define BNX2I_NX2_DEV_57710		0x3
+	u32 mail_queue_access;
+		#define BNX2I_MQ_KERNEL_MODE		0x0
+		#define BNX2I_MQ_KERNEL_BYPASS_MODE	0x1
+		#define BNX2I_MQ_BIN_MODE		0x2
+	unsigned long  reg_with_cnic;
+		#define BNX2I_CNIC_REGISTERED		1
+
+	unsigned long  adapter_state;
+		#define ADAPTER_STATE_UP		0
+		#define ADAPTER_STATE_GOING_DOWN	1
+		#define ADAPTER_STATE_LINK_DOWN		2
+		#define ADAPTER_STATE_INIT_FAILED	31
+	unsigned int mtu_supported;
+		#define BNX2I_MAX_MTU_SUPPORTED		1500
+
+	struct Scsi_Host *shost;
+
+	u32 max_sqes;
+	u32 max_rqes;
+	u32 max_cqes;
+	u32 num_ccell;
+
+	int ofld_conns_active;
+
+	int max_active_conns;
+	struct iscsi_cid_queue cid_que;
+
+	rwlock_t ep_rdwr_lock;
+	struct list_head ep_ofld_list;
+	struct list_head ep_destroy_list;
+
+	/*
+	 * BD table to be used with MP (Middle Path requests.
+	 */
+	char *mp_bd_tbl;
+	dma_addr_t mp_bd_dma;
+	char *dummy_buffer;
+	dma_addr_t dummy_buf_dma;
+
+	spinlock_t lock;	/* protects hba structure access */
+	struct mutex net_dev_lock;/* sync net device access */
+
+	/*
+	 * PCI related info.
+	 */
+	u16 pci_did;
+	u16 pci_vid;
+	u16 pci_sdid;
+	u16 pci_svid;
+	u16 pci_func;
+	u16 pci_devno;
+
+	/*
+	 * Following are a bunch of statistics useful during development
+	 * and later stage for score boarding.
+	 */
+	u32 num_wqe_sent;
+	u32 num_cqe_rcvd;
+	u32 num_intr_claimed;
+	u32 link_changed_count;
+	u32 ipaddr_changed_count;
+	u32 num_sess_opened;
+	u32 num_conn_opened;
+	unsigned int ctx_ccell_tasks;
+};
+
+
+/*******************************************************************************
+ * 	QP [ SQ / RQ / CQ ] info.
+ ******************************************************************************/
+
+/*
+ * SQ/RQ/CQ generic structure definition
+ */
+struct 	sqe {
+	u8 sqe_byte[BNX2I_SQ_WQE_SIZE];
+};
+
+struct 	rqe {
+	u8 rqe_byte[BNX2I_RQ_WQE_SIZE];
+};
+
+struct 	cqe {
+	u8 cqe_byte[BNX2I_CQE_SIZE];
+};
+
+
+enum {
+#if defined(__LITTLE_ENDIAN)
+	CNIC_EVENT_COAL_INDEX	= 0x0,
+	CNIC_SEND_DOORBELL	= 0x4,
+	CNIC_EVENT_CQ_ARM	= 0x7,
+	CNIC_RECV_DOORBELL	= 0x8
+#elif defined(__BIG_ENDIAN)
+	CNIC_EVENT_COAL_INDEX	= 0x2,
+	CNIC_SEND_DOORBELL	= 0x6,
+	CNIC_EVENT_CQ_ARM	= 0x4,
+	CNIC_RECV_DOORBELL	= 0xa
+#endif
+};
+
+
+/*
+ * CQ DB
+ */
+struct bnx2x_iscsi_cq_pend_cmpl {
+	/* CQ producer, updated by Ustorm */
+	u16 ustrom_prod;
+	/* CQ pending completion counter */
+	u16 pend_cntr;
+};
+
+
+struct bnx2i_5771x_cq_db {
+	struct bnx2x_iscsi_cq_pend_cmpl qp_pend_cmpl[BNX2X_MAX_CQS];
+	/* CQ pending completion ITT array */
+	u16 itt[BNX2X_MAX_CQS];
+	/* Cstorm CQ sequence to notify array, updated by driver */;
+	u16 sqn[BNX2X_MAX_CQS];
+	u32 reserved[4] /* 16 byte allignment */;
+};
+
+
+struct bnx2i_5771x_sq_rq_db {
+	u16 prod_idx;
+	u8 reserved0[14]; /* Pad structure size to 16 bytes */
+};
+
+
+struct bnx2i_5771x_dbell_hdr {
+	u8 header;
+	/* 1 for rx doorbell, 0 for tx doorbell */
+#define B577XX_DOORBELL_HDR_RX				(0x1<<0)
+#define B577XX_DOORBELL_HDR_RX_SHIFT			0
+	/* 0 for normal doorbell, 1 for advertise wnd doorbell */
+#define B577XX_DOORBELL_HDR_DB_TYPE			(0x1<<1)
+#define B577XX_DOORBELL_HDR_DB_TYPE_SHIFT		1
+	/* rdma tx only: DPM transaction size specifier (64/128/256/512B) */
+#define B577XX_DOORBELL_HDR_DPM_SIZE			(0x3<<2)
+#define B577XX_DOORBELL_HDR_DPM_SIZE_SHIFT		2
+	/* connection type */
+#define B577XX_DOORBELL_HDR_CONN_TYPE			(0xF<<4)
+#define B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT		4
+};
+
+struct bnx2i_5771x_dbell {
+	struct bnx2i_5771x_dbell_hdr dbell;
+	u8 pad[3];
+
+};
+
+/**
+ * struct qp_info - QP (share queue region) atrributes structure
+ *
+ * @ctx_base:           ioremapped pci register base to access doorbell register
+ *                      pertaining to this offloaded connection
+ * @sq_virt:            virtual address of send queue (SQ) region
+ * @sq_phys:            DMA address of SQ memory region
+ * @sq_mem_size:        SQ size
+ * @sq_prod_qe:         SQ producer entry pointer
+ * @sq_cons_qe:         SQ consumer entry pointer
+ * @sq_first_qe:        virtaul address of first entry in SQ
+ * @sq_last_qe:         virtaul address of last entry in SQ
+ * @sq_prod_idx:        SQ producer index
+ * @sq_cons_idx:        SQ consumer index
+ * @sqe_left:           number sq entry left
+ * @sq_pgtbl_virt:      page table describing buffer consituting SQ region
+ * @sq_pgtbl_phys:      dma address of 'sq_pgtbl_virt'
+ * @sq_pgtbl_size:      SQ page table size
+ * @cq_virt:            virtual address of completion queue (CQ) region
+ * @cq_phys:            DMA address of RQ memory region
+ * @cq_mem_size:        CQ size
+ * @cq_prod_qe:         CQ producer entry pointer
+ * @cq_cons_qe:         CQ consumer entry pointer
+ * @cq_first_qe:        virtaul address of first entry in CQ
+ * @cq_last_qe:         virtaul address of last entry in CQ
+ * @cq_prod_idx:        CQ producer index
+ * @cq_cons_idx:        CQ consumer index
+ * @cqe_left:           number cq entry left
+ * @cqe_size:           size of each CQ entry
+ * @cqe_exp_seq_sn:     next expected CQE sequence number
+ * @cq_pgtbl_virt:      page table describing buffer consituting CQ region
+ * @cq_pgtbl_phys:      dma address of 'cq_pgtbl_virt'
+ * @cq_pgtbl_size:    	CQ page table size
+ * @rq_virt:            virtual address of receive queue (RQ) region
+ * @rq_phys:            DMA address of RQ memory region
+ * @rq_mem_size:        RQ size
+ * @rq_prod_qe:         RQ producer entry pointer
+ * @rq_cons_qe:         RQ consumer entry pointer
+ * @rq_first_qe:        virtaul address of first entry in RQ
+ * @rq_last_qe:         virtaul address of last entry in RQ
+ * @rq_prod_idx:        RQ producer index
+ * @rq_cons_idx:        RQ consumer index
+ * @rqe_left:           number rq entry left
+ * @rq_pgtbl_virt:      page table describing buffer consituting RQ region
+ * @rq_pgtbl_phys:      dma address of 'rq_pgtbl_virt'
+ * @rq_pgtbl_size:      RQ page table size
+ *
+ * queue pair (QP) is a per connection shared data structure which is used
+ *	to send work requests (SQ), receive completion notifications (CQ)
+ *	and receive asynchoronous / scsi sense info (RQ). 'qp_info' structure
+ *	below holds queue memory, consumer/producer indexes and page table
+ *	information
+ */
+struct qp_info {
+	void __iomem *ctx_base;
+#define DPM_TRIGER_TYPE			0x40
+
+#define BNX2I_570x_QUE_DB_SIZE		0
+#define BNX2I_5771x_QUE_DB_SIZE		16
+	struct sqe *sq_virt;
+	dma_addr_t sq_phys;
+	u32 sq_mem_size;
+
+	struct sqe *sq_prod_qe;
+	struct sqe *sq_cons_qe;
+	struct sqe *sq_first_qe;
+	struct sqe *sq_last_qe;
+	u16 sq_prod_idx;
+	u16 sq_cons_idx;
+	u32 sqe_left;
+
+	void *sq_pgtbl_virt;
+	dma_addr_t sq_pgtbl_phys;
+	u32 sq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+
+	struct cqe *cq_virt;
+	dma_addr_t cq_phys;
+	u32 cq_mem_size;
+
+	struct cqe *cq_prod_qe;
+	struct cqe *cq_cons_qe;
+	struct cqe *cq_first_qe;
+	struct cqe *cq_last_qe;
+	u16 cq_prod_idx;
+	u16 cq_cons_idx;
+	u32 cqe_left;
+	u32 cqe_size;
+	u32 cqe_exp_seq_sn;
+
+	void *cq_pgtbl_virt;
+	dma_addr_t cq_pgtbl_phys;
+	u32 cq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+
+	struct rqe *rq_virt;
+	dma_addr_t rq_phys;
+	u32 rq_mem_size;
+
+	struct rqe *rq_prod_qe;
+	struct rqe *rq_cons_qe;
+	struct rqe *rq_first_qe;
+	struct rqe *rq_last_qe;
+	u16 rq_prod_idx;
+	u16 rq_cons_idx;
+	u32 rqe_left;
+
+	void *rq_pgtbl_virt;
+	dma_addr_t rq_pgtbl_phys;
+	u32 rq_pgtbl_size;	/* set to PAGE_SIZE for 5708 & 5709 */
+};
+
+
+
+/*
+ * CID handles
+ */
+struct ep_handles {
+	u32 fw_cid;
+	u32 drv_iscsi_cid;
+	u16 pg_cid;
+	u16 rsvd;
+};
+
+
+enum {
+	EP_STATE_IDLE                   = 0x0,
+	EP_STATE_PG_OFLD_START          = 0x1,
+	EP_STATE_PG_OFLD_COMPL          = 0x2,
+	EP_STATE_OFLD_START             = 0x4,
+	EP_STATE_OFLD_COMPL             = 0x8,
+	EP_STATE_CONNECT_START          = 0x10,
+	EP_STATE_CONNECT_COMPL          = 0x20,
+	EP_STATE_ULP_UPDATE_START       = 0x40,
+	EP_STATE_ULP_UPDATE_COMPL       = 0x80,
+	EP_STATE_DISCONN_START          = 0x100,
+	EP_STATE_DISCONN_COMPL          = 0x200,
+	EP_STATE_CLEANUP_START          = 0x400,
+	EP_STATE_CLEANUP_CMPL           = 0x800,
+	EP_STATE_TCP_FIN_RCVD           = 0x1000,
+	EP_STATE_TCP_RST_RCVD           = 0x2000,
+	EP_STATE_PG_OFLD_FAILED         = 0x1000000,
+	EP_STATE_ULP_UPDATE_FAILED      = 0x2000000,
+	EP_STATE_CLEANUP_FAILED         = 0x4000000,
+	EP_STATE_OFLD_FAILED            = 0x8000000,
+	EP_STATE_CONNECT_FAILED         = 0x10000000,
+	EP_STATE_DISCONN_TIMEDOUT       = 0x20000000,
+};
+
+/**
+ * struct bnx2i_endpoint - representation of tcp connection in NX2 world
+ *
+ * @link:               list head to link elements
+ * @hba:                adapter to which this connection belongs
+ * @conn:               iscsi connection this EP is linked to
+ * @sess:               iscsi session this EP is linked to
+ * @cm_sk:              cnic sock struct
+ * @hba_age:            age to detect if 'iscsid' issues ep_disconnect()
+ *                      after HBA reset is completed by bnx2i/cnic/bnx2
+ *                      modules
+ * @state:              tracks offload connection state machine
+ * @teardown_mode:      indicates if conn teardown is abortive or orderly
+ * @qp:                 QP information
+ * @ids:                contains chip allocated *context id* & driver assigned
+ *                      *iscsi cid*
+ * @ofld_timer:         offload timer to detect timeout
+ * @ofld_wait:          wait queue
+ *
+ * Endpoint Structure - equivalent of tcp socket structure
+ */
+struct bnx2i_endpoint {
+	struct list_head link;
+	struct bnx2i_hba *hba;
+	struct bnx2i_conn *conn;
+	struct cnic_sock *cm_sk;
+	u32 hba_age;
+	u32 state;
+	unsigned long timestamp;
+	int num_active_cmds;
+
+	struct qp_info qp;
+	struct ep_handles ids;
+		#define ep_iscsi_cid	ids.drv_iscsi_cid
+		#define ep_cid		ids.fw_cid
+		#define ep_pg_cid	ids.pg_cid
+	struct timer_list ofld_timer;
+	wait_queue_head_t ofld_wait;
+};
+
+
+
+/* Global variables */
+extern unsigned int error_mask1, error_mask2;
+extern u64 iscsi_error_mask;
+extern unsigned int en_tcp_dack;
+extern unsigned int event_coal_div;
+
+extern struct scsi_transport_template *bnx2i_scsi_xport_template;
+extern struct iscsi_transport bnx2i_iscsi_transport;
+extern struct cnic_ulp_ops bnx2i_cnic_cb;
+
+extern unsigned int sq_size;
+extern unsigned int rq_size;
+
+extern struct device_attribute *bnx2i_dev_attributes[];
+
+
+
+/*
+ * Function Prototypes
+ */
+extern void bnx2i_identify_device(struct bnx2i_hba *hba);
+extern void bnx2i_register_device(struct bnx2i_hba *hba);
+
+extern void bnx2i_ulp_init(struct cnic_dev *dev);
+extern void bnx2i_ulp_exit(struct cnic_dev *dev);
+extern void bnx2i_start(void *handle);
+extern void bnx2i_stop(void *handle);
+extern void bnx2i_reg_dev_all(void);
+extern void bnx2i_unreg_dev_all(void);
+extern struct bnx2i_hba *get_adapter_list_head(void);
+
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+					  u16 iscsi_cid);
+
+int bnx2i_alloc_ep_pool(void);
+void bnx2i_release_ep_pool(void);
+struct bnx2i_endpoint *bnx2i_ep_ofld_list_next(struct bnx2i_hba *hba);
+struct bnx2i_endpoint *bnx2i_ep_destroy_list_next(struct bnx2i_hba *hba);
+
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic);
+
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic);
+void bnx2i_free_hba(struct bnx2i_hba *hba);
+
+void bnx2i_get_rq_buf(struct bnx2i_conn *conn, char *ptr, int len);
+void bnx2i_put_rq_buf(struct bnx2i_conn *conn, int count);
+
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd);
+
+void bnx2i_drop_session(struct iscsi_cls_session *session);
+
+extern int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba);
+extern int bnx2i_send_iscsi_login(struct bnx2i_conn *conn,
+				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_tmf(struct bnx2i_conn *conn,
+				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *conn,
+				    struct bnx2i_cmd *cmnd);
+extern int bnx2i_send_iscsi_nopout(struct bnx2i_conn *conn,
+				   struct iscsi_task *mtask, u32 ttt,
+				   char *datap, int data_len, int unsol);
+extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
+				   struct iscsi_task *mtask);
+extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
+				       struct bnx2i_cmd *cmd);
+extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+				    struct bnx2i_endpoint *ep);
+
+extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
+			       struct bnx2i_endpoint *ep);
+extern void bnx2i_free_qp_resc(struct bnx2i_hba *hba,
+			       struct bnx2i_endpoint *ep);
+extern void bnx2i_ep_ofld_timer(unsigned long data);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_ofld_list(
+		struct bnx2i_hba *hba, u32 iscsi_cid);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_destroy_list(
+		struct bnx2i_hba *hba, u32 iscsi_cid);
+
+extern int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep);
+extern void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action);
+
+/* Debug related function prototypes */
+extern void bnx2i_print_pend_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_active_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_xmit_pdu_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_recv_state(struct bnx2i_conn *conn);
+
+#endif
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
new file mode 100644
index 00000000000..906cef5cda8
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -0,0 +1,2405 @@
+/* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+/**
+ * bnx2i_get_cid_num - get cid from ep
+ * @ep: 	endpoint pointer
+ *
+ * Only applicable to 57710 family of devices
+ */
+static u32 bnx2i_get_cid_num(struct bnx2i_endpoint *ep)
+{
+	u32 cid;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		cid = ep->ep_cid;
+	else
+		cid = GET_CID_NUM(ep->ep_cid);
+	return cid;
+}
+
+
+/**
+ * bnx2i_adjust_qp_size - Adjust SQ/RQ/CQ size for 57710 device type
+ * @hba: 		Adapter for which adjustments is to be made
+ *
+ * Only applicable to 57710 family of devices
+ */
+static void bnx2i_adjust_qp_size(struct bnx2i_hba *hba)
+{
+	u32 num_elements_per_pg;
+
+	if (test_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type) ||
+	    test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type) ||
+	    test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+		if (!is_power_of_2(hba->max_sqes))
+			hba->max_sqes = rounddown_pow_of_two(hba->max_sqes);
+
+		if (!is_power_of_2(hba->max_rqes))
+			hba->max_rqes = rounddown_pow_of_two(hba->max_rqes);
+	}
+
+	/* Adjust each queue size if the user selection does not
+	 * yield integral num of page buffers
+	 */
+	/* adjust SQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+	if (hba->max_sqes < num_elements_per_pg)
+		hba->max_sqes = num_elements_per_pg;
+	else if (hba->max_sqes % num_elements_per_pg)
+		hba->max_sqes = (hba->max_sqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+
+	/* adjust CQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_CQE_SIZE;
+	if (hba->max_cqes < num_elements_per_pg)
+		hba->max_cqes = num_elements_per_pg;
+	else if (hba->max_cqes % num_elements_per_pg)
+		hba->max_cqes = (hba->max_cqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+
+	/* adjust RQ */
+	num_elements_per_pg = PAGE_SIZE / BNX2I_RQ_WQE_SIZE;
+	if (hba->max_rqes < num_elements_per_pg)
+		hba->max_rqes = num_elements_per_pg;
+	else if (hba->max_rqes % num_elements_per_pg)
+		hba->max_rqes = (hba->max_rqes + num_elements_per_pg - 1) &
+				 ~(num_elements_per_pg - 1);
+}
+
+
+/**
+ * bnx2i_get_link_state - get network interface link state
+ * @hba:	adapter instance pointer
+ *
+ * updates adapter structure flag based on netdev state
+ */
+static void bnx2i_get_link_state(struct bnx2i_hba *hba)
+{
+	if (test_bit(__LINK_STATE_NOCARRIER, &hba->netdev->state))
+		set_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+	else
+		clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_iscsi_license_error - displays iscsi license related error message
+ * @hba:		adapter instance pointer
+ * @error_code:		error classification
+ *
+ * Puts out an error log when driver is unable to offload iscsi connection
+ *	due to license restrictions
+ */
+static void bnx2i_iscsi_license_error(struct bnx2i_hba *hba, u32 error_code)
+{
+	if (error_code == ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED)
+		/* iSCSI offload not supported on this device */
+		printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
+				hba->netdev->name);
+	if (error_code == ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED)
+		/* iSCSI offload not supported on this LOM device */
+		printk(KERN_ERR "bnx2i: LOM is not enable to "
+				"offload iSCSI connections, dev=%s\n",
+				hba->netdev->name);
+	set_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_arm_cq_event_coalescing - arms CQ to enable EQ notification
+ * @ep:		endpoint (transport indentifier) structure
+ * @action:	action, ARM or DISARM. For now only ARM_CQE is used
+ *
+ * Arm'ing CQ will enable chip to generate global EQ events inorder to interrupt
+ *	the driver. EQ event is generated CQ index is hit or at least 1 CQ is
+ *	outstanding and on chip timer expires
+ */
+void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
+{
+	struct bnx2i_5771x_cq_db *cq_db;
+	u16 cq_index;
+
+	if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		return;
+
+	if (action == CNIC_ARM_CQE) {
+		cq_index = ep->qp.cqe_exp_seq_sn +
+			   ep->num_active_cmds / event_coal_div;
+		cq_index %= (ep->qp.cqe_size * 2 + 1);
+		if (!cq_index) {
+			cq_index = 1;
+			cq_db = (struct bnx2i_5771x_cq_db *)
+					ep->qp.cq_pgtbl_virt;
+			cq_db->sqn[0] = cq_index;
+		}
+	}
+}
+
+
+/**
+ * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
+ * @conn:		iscsi connection on which RQ event occured
+ * @ptr:		driver buffer to which RQ buffer contents is to
+ *			be copied
+ * @len:		length of valid data inside RQ buf
+ *
+ * Copies RQ buffer contents from shared (DMA'able) memory region to
+ *	driver buffer. RQ is used to DMA unsolicitated iscsi pdu's and
+ *	scsi sense info
+ */
+void bnx2i_get_rq_buf(struct bnx2i_conn *bnx2i_conn, char *ptr, int len)
+{
+	if (!bnx2i_conn->ep->qp.rqe_left)
+		return;
+
+	bnx2i_conn->ep->qp.rqe_left--;
+	memcpy(ptr, (u8 *) bnx2i_conn->ep->qp.rq_cons_qe, len);
+	if (bnx2i_conn->ep->qp.rq_cons_qe == bnx2i_conn->ep->qp.rq_last_qe) {
+		bnx2i_conn->ep->qp.rq_cons_qe = bnx2i_conn->ep->qp.rq_first_qe;
+		bnx2i_conn->ep->qp.rq_cons_idx = 0;
+	} else {
+		bnx2i_conn->ep->qp.rq_cons_qe++;
+		bnx2i_conn->ep->qp.rq_cons_idx++;
+	}
+}
+
+
+static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn)
+{
+	struct bnx2i_5771x_dbell dbell;
+	u32 msg;
+
+	memset(&dbell, 0, sizeof(dbell));
+	dbell.dbell.header = (B577XX_ISCSI_CONNECTION_TYPE <<
+			      B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT);
+	msg = *((u32 *)&dbell);
+	/* TODO : get doorbell register mapping */
+	writel(cpu_to_le32(msg), conn->ep->qp.ctx_base);
+}
+
+
+/**
+ * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell
+ * @conn:	iscsi connection on which event to post
+ * @count:	number of RQ buffer being posted to chip
+ *
+ * No need to ring hardware doorbell for 57710 family of devices
+ */
+void bnx2i_put_rq_buf(struct bnx2i_conn *bnx2i_conn, int count)
+{
+	struct bnx2i_5771x_sq_rq_db *rq_db;
+	u16 hi_bit = (bnx2i_conn->ep->qp.rq_prod_idx & 0x8000);
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+	ep->qp.rqe_left += count;
+	ep->qp.rq_prod_idx &= 0x7FFF;
+	ep->qp.rq_prod_idx += count;
+
+	if (ep->qp.rq_prod_idx > bnx2i_conn->hba->max_rqes) {
+		ep->qp.rq_prod_idx %= bnx2i_conn->hba->max_rqes;
+		if (!hi_bit)
+			ep->qp.rq_prod_idx |= 0x8000;
+	} else
+		ep->qp.rq_prod_idx |= hi_bit;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		rq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.rq_pgtbl_virt;
+		rq_db->prod_idx = ep->qp.rq_prod_idx;
+		/* no need to ring hardware doorbell for 57710 */
+	} else {
+		writew(ep->qp.rq_prod_idx,
+		       ep->qp.ctx_base + CNIC_RECV_DOORBELL);
+	}
+	mmiowb();
+}
+
+
+/**
+ * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
+ * @conn: 		iscsi connection to which new SQ entries belong
+ * @count: 		number of SQ WQEs to post
+ *
+ * SQ DB is updated in host memory and TX Doorbell is rung for 57710 family
+ *	of devices. For 5706/5708/5709 new SQ WQE count is written into the
+ *	doorbell register
+ */
+static void bnx2i_ring_sq_dbell(struct bnx2i_conn *bnx2i_conn, int count)
+{
+	struct bnx2i_5771x_sq_rq_db *sq_db;
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+	ep->num_active_cmds++;
+	wmb();	/* flush SQ WQE memory before the doorbell is rung */
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		sq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.sq_pgtbl_virt;
+		sq_db->prod_idx = ep->qp.sq_prod_idx;
+		bnx2i_ring_577xx_doorbell(bnx2i_conn);
+	} else
+		writew(count, ep->qp.ctx_base + CNIC_SEND_DOORBELL);
+
+	mmiowb(); /* flush posted PCI writes */
+}
+
+
+/**
+ * bnx2i_ring_dbell_update_sq_params - update SQ driver parameters
+ * @conn:	iscsi connection to which new SQ entries belong
+ * @count:	number of SQ WQEs to post
+ *
+ * this routine will update SQ driver parameters and ring the doorbell
+ */
+static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn,
+					      int count)
+{
+	int tmp_cnt;
+
+	if (count == 1) {
+		if (bnx2i_conn->ep->qp.sq_prod_qe ==
+		    bnx2i_conn->ep->qp.sq_last_qe)
+			bnx2i_conn->ep->qp.sq_prod_qe =
+						bnx2i_conn->ep->qp.sq_first_qe;
+		else
+			bnx2i_conn->ep->qp.sq_prod_qe++;
+	} else {
+		if ((bnx2i_conn->ep->qp.sq_prod_qe + count) <=
+		    bnx2i_conn->ep->qp.sq_last_qe)
+			bnx2i_conn->ep->qp.sq_prod_qe += count;
+		else {
+			tmp_cnt = bnx2i_conn->ep->qp.sq_last_qe -
+				bnx2i_conn->ep->qp.sq_prod_qe;
+			bnx2i_conn->ep->qp.sq_prod_qe =
+				&bnx2i_conn->ep->qp.sq_first_qe[count -
+								(tmp_cnt + 1)];
+		}
+	}
+	bnx2i_conn->ep->qp.sq_prod_idx += count;
+	/* Ring the doorbell */
+	bnx2i_ring_sq_dbell(bnx2i_conn, bnx2i_conn->ep->qp.sq_prod_idx);
+}
+
+
+/**
+ * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
+			   struct iscsi_task *task)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_login_request *login_wqe;
+	struct iscsi_login *login_hdr;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	login_hdr = (struct iscsi_login *)task->hdr;
+	login_wqe = (struct bnx2i_login_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+
+	login_wqe->op_code = login_hdr->opcode;
+	login_wqe->op_attr = login_hdr->flags;
+	login_wqe->version_max = login_hdr->max_version;
+	login_wqe->version_min = login_hdr->min_version;
+	login_wqe->data_length = ntoh24(login_hdr->dlength);
+	login_wqe->isid_lo = *((u32 *) login_hdr->isid);
+	login_wqe->isid_hi = *((u16 *) login_hdr->isid + 2);
+	login_wqe->tsih = login_hdr->tsih;
+	login_wqe->itt = task->itt |
+		(ISCSI_TASK_TYPE_MPATH << ISCSI_LOGIN_REQUEST_TYPE_SHIFT);
+	login_wqe->cid = login_hdr->cid;
+
+	login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn);
+	login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn);
+
+	login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
+	login_wqe->resp_bd_list_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
+
+	dword = ((1 << ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT) |
+		 (bnx2i_conn->gen_pdu.resp_buf_size <<
+		  ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
+	login_wqe->resp_buffer = dword;
+	login_wqe->flags = 0;
+	login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
+	login_wqe->bd_list_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
+	login_wqe->num_bds = 1;
+	login_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware
+ * @conn:	iscsi connection
+ * @mtask:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
+			 struct iscsi_task *mtask)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_tm *tmfabort_hdr;
+	struct scsi_cmnd *ref_sc;
+	struct iscsi_task *ctask;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_tmf_request *tmfabort_wqe;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
+	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
+	tmfabort_wqe = (struct bnx2i_tmf_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+
+	tmfabort_wqe->op_code = tmfabort_hdr->opcode;
+	tmfabort_wqe->op_attr = 0;
+	tmfabort_wqe->op_attr =
+		ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
+	tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
+	tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
+
+	tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
+	tmfabort_wqe->reserved2 = 0;
+	tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
+
+	ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
+	if (!ctask || ctask->sc)
+		/*
+		 * the iscsi layer must have completed the cmd while this
+		 * was starting up.
+		 */
+		return 0;
+	ref_sc = ctask->sc;
+
+	if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
+		dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	else
+		dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
+
+	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+	tmfabort_wqe->bd_list_addr_hi = (u32)
+				((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+	tmfabort_wqe->num_bds = 1;
+	tmfabort_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI SCSI-CMD request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn,
+			     struct bnx2i_cmd *cmd)
+{
+	struct bnx2i_cmd_request *scsi_cmd_wqe;
+
+	scsi_cmd_wqe = (struct bnx2i_cmd_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+	memcpy(scsi_cmd_wqe, &cmd->req, sizeof(struct bnx2i_cmd_request));
+	scsi_cmd_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware
+ * @conn:		iscsi connection
+ * @cmd:		driver command structure which is requesting
+ *			a WQE to sent to chip for further processing
+ * @ttt:		TTT to be used when building pdu header
+ * @datap:		payload buffer pointer
+ * @data_len:		payload data length
+ * @unsol:		indicated whether nopout pdu is unsolicited pdu or
+ *			in response to target's NOPIN w/ TTT != FFFFFFFF
+ *
+ * prepare and post a nopout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
+			    struct iscsi_task *task, u32 ttt,
+			    char *datap, int data_len, int unsol)
+{
+	struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_nop_out_request *nopout_wqe;
+	struct iscsi_nopout *nopout_hdr;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	nopout_hdr = (struct iscsi_nopout *)task->hdr;
+	nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
+	nopout_wqe->op_code = nopout_hdr->opcode;
+	nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
+	memcpy(nopout_wqe->lun, nopout_hdr->lun, 8);
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		u32 tmp = nopout_hdr->lun[0];
+		/* 57710 requires LUN field to be swapped */
+		nopout_hdr->lun[0] = nopout_hdr->lun[1];
+		nopout_hdr->lun[1] = tmp;
+	}
+
+	nopout_wqe->itt = ((u16)task->itt |
+			   (ISCSI_TASK_TYPE_MPATH <<
+			    ISCSI_TMF_REQUEST_TYPE_SHIFT));
+	nopout_wqe->ttt = ttt;
+	nopout_wqe->flags = 0;
+	if (!unsol)
+		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+	else if (nopout_hdr->itt == RESERVED_ITT)
+		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+
+	nopout_wqe->cmd_sn = be32_to_cpu(nopout_hdr->cmdsn);
+	nopout_wqe->data_length = data_len;
+	if (data_len) {
+		/* handle payload data, not required in first release */
+		printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
+	} else {
+		nopout_wqe->bd_list_addr_lo = (u32)
+					bnx2i_conn->hba->mp_bd_dma;
+		nopout_wqe->bd_list_addr_hi =
+			(u32) ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+		nopout_wqe->num_bds = 1;
+	}
+	nopout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
+ * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware
+ * @conn:	iscsi connection
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post logout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
+			    struct iscsi_task *task)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_logout_request *logout_wqe;
+	struct iscsi_logout *logout_hdr;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+	logout_hdr = (struct iscsi_logout *)task->hdr;
+
+	logout_wqe = (struct bnx2i_logout_request *)
+						bnx2i_conn->ep->qp.sq_prod_qe;
+	memset(logout_wqe, 0x00, sizeof(struct bnx2i_logout_request));
+
+	logout_wqe->op_code = logout_hdr->opcode;
+	logout_wqe->cmd_sn = be32_to_cpu(logout_hdr->cmdsn);
+	logout_wqe->op_attr =
+			logout_hdr->flags | ISCSI_LOGOUT_REQUEST_ALWAYS_ONE;
+	logout_wqe->itt = ((u16)task->itt |
+			   (ISCSI_TASK_TYPE_MPATH <<
+			    ISCSI_LOGOUT_REQUEST_TYPE_SHIFT));
+	logout_wqe->data_length = 0;
+	logout_wqe->cid = 0;
+
+	logout_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+	logout_wqe->bd_list_addr_hi = (u32)
+				((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+	logout_wqe->num_bds = 1;
+	logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
+ * bnx2i_update_iscsi_conn - post iSCSI logout request WQE to hardware
+ * @conn:	iscsi connection which requires iscsi parameter update
+ *
+ * sends down iSCSI Conn Update request to move iSCSI conn to FFP
+ */
+void bnx2i_update_iscsi_conn(struct iscsi_conn *conn)
+{
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_hba *hba = bnx2i_conn->hba;
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_update *update_wqe;
+	struct iscsi_kwqe_conn_update conn_update_kwqe;
+
+	update_wqe = &conn_update_kwqe;
+
+	update_wqe->hdr.op_code = ISCSI_KWQE_OPCODE_UPDATE_CONN;
+	update_wqe->hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	/* 5771x requires conn context id to be passed as is */
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_conn->ep->hba->cnic_dev_type))
+		update_wqe->context_id = bnx2i_conn->ep->ep_cid;
+	else
+		update_wqe->context_id = (bnx2i_conn->ep->ep_cid >> 7);
+	update_wqe->conn_flags = 0;
+	if (conn->hdrdgst_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST;
+	if (conn->datadgst_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST;
+	if (conn->session->initial_r2t_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T;
+	if (conn->session->imm_data_en)
+		update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA;
+
+	update_wqe->max_send_pdu_length = conn->max_xmit_dlength;
+	update_wqe->max_recv_pdu_length = conn->max_recv_dlength;
+	update_wqe->first_burst_length = conn->session->first_burst;
+	update_wqe->max_burst_length = conn->session->max_burst;
+	update_wqe->exp_stat_sn = conn->exp_statsn;
+	update_wqe->max_outstanding_r2ts = conn->session->max_r2t;
+	update_wqe->session_error_recovery_level = conn->session->erl;
+	iscsi_conn_printk(KERN_ALERT, conn,
+			  "bnx2i: conn update - MBL 0x%x FBL 0x%x"
+			  "MRDSL_I 0x%x MRDSL_T 0x%x \n",
+			  update_wqe->max_burst_length,
+			  update_wqe->first_burst_length,
+			  update_wqe->max_recv_pdu_length,
+			  update_wqe->max_send_pdu_length);
+
+	kwqe_arr[0] = (struct kwqe *) update_wqe;
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_ep_ofld_timer - post iSCSI logout request WQE to hardware
+ * @data:	endpoint (transport handle) structure pointer
+ *
+ * routine to handle connection offload/destroy request timeout
+ */
+void bnx2i_ep_ofld_timer(unsigned long data)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) data;
+
+	if (ep->state == EP_STATE_OFLD_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
+		ep->state = EP_STATE_OFLD_FAILED;
+	} else if (ep->state == EP_STATE_DISCONN_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
+		ep->state = EP_STATE_DISCONN_TIMEDOUT;
+	} else if (ep->state == EP_STATE_CLEANUP_START) {
+		printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
+		ep->state = EP_STATE_CLEANUP_FAILED;
+	}
+
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+static int bnx2i_power_of2(u32 val)
+{
+	u32 power = 0;
+	if (val & (val - 1))
+		return power;
+	val--;
+	while (val) {
+		val = val >> 1;
+		power++;
+	}
+	return power;
+}
+
+
+/**
+ * bnx2i_send_cmd_cleanup_req - send iscsi cmd context clean-up request
+ * @hba:	adapter structure pointer
+ * @cmd:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+	struct bnx2i_cleanup_request *cmd_cleanup;
+
+	cmd_cleanup =
+		(struct bnx2i_cleanup_request *)cmd->conn->ep->qp.sq_prod_qe;
+	memset(cmd_cleanup, 0x00, sizeof(struct bnx2i_cleanup_request));
+
+	cmd_cleanup->op_code = ISCSI_OPCODE_CLEANUP_REQUEST;
+	cmd_cleanup->itt = cmd->req.itt;
+	cmd_cleanup->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(cmd->conn, 1);
+}
+
+
+/**
+ * bnx2i_send_conn_destroy - initiates iscsi connection teardown process
+ * @hba:	adapter structure pointer
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
+ * 	iscsi connection context clean-up process
+ */
+void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_destroy conn_cleanup;
+
+	memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
+
+	conn_cleanup.hdr.op_code = ISCSI_KWQE_OPCODE_DESTROY_CONN;
+	conn_cleanup.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+	/* 5771x requires conn context id to be passed as is */
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		conn_cleanup.context_id = ep->ep_cid;
+	else
+		conn_cleanup.context_id = (ep->ep_cid >> 7);
+
+	conn_cleanup.reserved0 = (u16)ep->ep_iscsi_cid;
+
+	kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_570x_send_conn_ofld_req - initiates iscsi conn context setup process
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					  struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[2];
+	struct iscsi_kwqe_conn_offload1 ofld_req1;
+	struct iscsi_kwqe_conn_offload2 ofld_req2;
+	dma_addr_t dma_addr;
+	int num_kwqes = 2;
+	u32 *ptbl;
+
+	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+	ofld_req1.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+	dma_addr = ep->qp.sq_pgtbl_phys;
+	ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	dma_addr = ep->qp.cq_pgtbl_phys;
+	ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+	ofld_req2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	dma_addr = ep->qp.rq_pgtbl_phys;
+	ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+
+	ofld_req2.sq_first_pte.hi = *ptbl++;
+	ofld_req2.sq_first_pte.lo = *ptbl;
+
+	ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+	ofld_req2.cq_first_pte.hi = *ptbl++;
+	ofld_req2.cq_first_pte.lo = *ptbl;
+
+	kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+	kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+	ofld_req2.num_additional_wqes = 0;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+
+/**
+ * bnx2i_5771x_send_conn_ofld_req - initiates iscsi connection context creation
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					   struct bnx2i_endpoint *ep)
+{
+	struct kwqe *kwqe_arr[5];
+	struct iscsi_kwqe_conn_offload1 ofld_req1;
+	struct iscsi_kwqe_conn_offload2 ofld_req2;
+	struct iscsi_kwqe_conn_offload3 ofld_req3[1];
+	dma_addr_t dma_addr;
+	int num_kwqes = 2;
+	u32 *ptbl;
+
+	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+	ofld_req1.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+	dma_addr = ep->qp.sq_pgtbl_phys + ISCSI_SQ_DB_SIZE;
+	ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	dma_addr = ep->qp.cq_pgtbl_phys + ISCSI_CQ_DB_SIZE;
+	ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+	ofld_req2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	dma_addr = ep->qp.rq_pgtbl_phys + ISCSI_RQ_DB_SIZE;
+	ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+	ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+	ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+	ofld_req2.sq_first_pte.hi = *ptbl++;
+	ofld_req2.sq_first_pte.lo = *ptbl;
+
+	ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+	ofld_req2.cq_first_pte.hi = *ptbl++;
+	ofld_req2.cq_first_pte.lo = *ptbl;
+
+	kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+	kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+
+	ofld_req2.num_additional_wqes = 1;
+	memset(ofld_req3, 0x00, sizeof(ofld_req3[0]));
+	ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+	ofld_req3[0].qp_first_pte[0].hi = *ptbl++;
+	ofld_req3[0].qp_first_pte[0].lo = *ptbl;
+
+	kwqe_arr[2] = (struct kwqe *) ofld_req3;
+	/* need if we decide to go with multiple KCQE's per conn */
+	num_kwqes += 1;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+/**
+ * bnx2i_send_conn_ofld_req - initiates iscsi connection context setup process
+ *
+ * @hba: 		adapter structure pointer
+ * @ep: 		endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		bnx2i_5771x_send_conn_ofld_req(hba, ep);
+	else
+		bnx2i_570x_send_conn_ofld_req(hba, ep);
+}
+
+
+/**
+ * setup_qp_page_tables - iscsi QP page table setup function
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * Sets up page tables for SQ/RQ/CQ, 1G/sec (5706/5708/5709) devices requires
+ * 	64-bit address in big endian format. Whereas 10G/sec (57710) requires
+ * 	PT in little endian format
+ */
+static void setup_qp_page_tables(struct bnx2i_endpoint *ep)
+{
+	int num_pages;
+	u32 *ptbl;
+	dma_addr_t page;
+	int cnic_dev_10g;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+		cnic_dev_10g = 1;
+	else
+		cnic_dev_10g = 0;
+
+	/* SQ page table */
+	memset(ep->qp.sq_pgtbl_virt, 0, ep->qp.sq_pgtbl_size);
+	num_pages = ep->qp.sq_mem_size / PAGE_SIZE;
+	page = ep->qp.sq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+
+	/* RQ page table */
+	memset(ep->qp.rq_pgtbl_virt, 0, ep->qp.rq_pgtbl_size);
+	num_pages = ep->qp.rq_mem_size / PAGE_SIZE;
+	page = ep->qp.rq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.rq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+
+	/* CQ page table */
+	memset(ep->qp.cq_pgtbl_virt, 0, ep->qp.cq_pgtbl_size);
+	num_pages = ep->qp.cq_mem_size / PAGE_SIZE;
+	page = ep->qp.cq_phys;
+
+	if (cnic_dev_10g)
+		ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+	else
+		ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+	while (num_pages--) {
+		if (cnic_dev_10g) {
+			/* PTE is written in little endian format for 57710 */
+			*ptbl = (u32) page;
+			ptbl++;
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			page += PAGE_SIZE;
+		} else {
+			/* PTE is written in big endian format for
+			 * 5706/5708/5709 devices */
+			*ptbl = (u32) ((u64) page >> 32);
+			ptbl++;
+			*ptbl = (u32) page;
+			ptbl++;
+			page += PAGE_SIZE;
+		}
+	}
+}
+
+
+/**
+ * bnx2i_alloc_qp_resc - allocates required resources for QP.
+ * @hba:	adapter structure pointer
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * Allocate QP (transport layer for iSCSI connection) resources, DMA'able
+ *	memory for SQ/RQ/CQ and page tables. EP structure elements such
+ *	as producer/consumer indexes/pointers, queue sizes and page table
+ *	contents are setup
+ */
+int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	struct bnx2i_5771x_cq_db *cq_db;
+
+	ep->hba = hba;
+	ep->conn = NULL;
+	ep->ep_cid = ep->ep_iscsi_cid = ep->ep_pg_cid = 0;
+
+	/* Allocate page table memory for SQ which is page aligned */
+	ep->qp.sq_mem_size = hba->max_sqes * BNX2I_SQ_WQE_SIZE;
+	ep->qp.sq_mem_size =
+		(ep->qp.sq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.sq_pgtbl_size =
+		(ep->qp.sq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.sq_pgtbl_size =
+		(ep->qp.sq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.sq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+				   &ep->qp.sq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.sq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
+				  ep->qp.sq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual SQ element */
+	ep->qp.sq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+				   &ep->qp.sq_phys, GFP_KERNEL);
+	if (!ep->qp.sq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
+				  ep->qp.sq_mem_size);
+		goto mem_alloc_err;
+	}
+
+	memset(ep->qp.sq_virt, 0x00, ep->qp.sq_mem_size);
+	ep->qp.sq_first_qe = ep->qp.sq_virt;
+	ep->qp.sq_prod_qe = ep->qp.sq_first_qe;
+	ep->qp.sq_cons_qe = ep->qp.sq_first_qe;
+	ep->qp.sq_last_qe = &ep->qp.sq_first_qe[hba->max_sqes - 1];
+	ep->qp.sq_prod_idx = 0;
+	ep->qp.sq_cons_idx = 0;
+	ep->qp.sqe_left = hba->max_sqes;
+
+	/* Allocate page table memory for CQ which is page aligned */
+	ep->qp.cq_mem_size = hba->max_cqes * BNX2I_CQE_SIZE;
+	ep->qp.cq_mem_size =
+		(ep->qp.cq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.cq_pgtbl_size =
+		(ep->qp.cq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.cq_pgtbl_size =
+		(ep->qp.cq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.cq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+				   &ep->qp.cq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.cq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
+				  ep->qp.cq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual CQ element */
+	ep->qp.cq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+				   &ep->qp.cq_phys, GFP_KERNEL);
+	if (!ep->qp.cq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
+				  ep->qp.cq_mem_size);
+		goto mem_alloc_err;
+	}
+	memset(ep->qp.cq_virt, 0x00, ep->qp.cq_mem_size);
+
+	ep->qp.cq_first_qe = ep->qp.cq_virt;
+	ep->qp.cq_prod_qe = ep->qp.cq_first_qe;
+	ep->qp.cq_cons_qe = ep->qp.cq_first_qe;
+	ep->qp.cq_last_qe = &ep->qp.cq_first_qe[hba->max_cqes - 1];
+	ep->qp.cq_prod_idx = 0;
+	ep->qp.cq_cons_idx = 0;
+	ep->qp.cqe_left = hba->max_cqes;
+	ep->qp.cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+	ep->qp.cqe_size = hba->max_cqes;
+
+	/* Invalidate all EQ CQE index, req only for 57710 */
+	cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+	memset(cq_db->sqn, 0xFF, sizeof(cq_db->sqn[0]) * BNX2X_MAX_CQS);
+
+	/* Allocate page table memory for RQ which is page aligned */
+	ep->qp.rq_mem_size = hba->max_rqes * BNX2I_RQ_WQE_SIZE;
+	ep->qp.rq_mem_size =
+		(ep->qp.rq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	ep->qp.rq_pgtbl_size =
+		(ep->qp.rq_mem_size / PAGE_SIZE) * sizeof(void *);
+	ep->qp.rq_pgtbl_size =
+		(ep->qp.rq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	ep->qp.rq_pgtbl_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+				   &ep->qp.rq_pgtbl_phys, GFP_KERNEL);
+	if (!ep->qp.rq_pgtbl_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
+				  ep->qp.rq_pgtbl_size);
+		goto mem_alloc_err;
+	}
+
+	/* Allocate memory area for actual RQ element */
+	ep->qp.rq_virt =
+		dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+				   &ep->qp.rq_phys, GFP_KERNEL);
+	if (!ep->qp.rq_virt) {
+		printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
+				  ep->qp.rq_mem_size);
+		goto mem_alloc_err;
+	}
+
+	ep->qp.rq_first_qe = ep->qp.rq_virt;
+	ep->qp.rq_prod_qe = ep->qp.rq_first_qe;
+	ep->qp.rq_cons_qe = ep->qp.rq_first_qe;
+	ep->qp.rq_last_qe = &ep->qp.rq_first_qe[hba->max_rqes - 1];
+	ep->qp.rq_prod_idx = 0x8000;
+	ep->qp.rq_cons_idx = 0;
+	ep->qp.rqe_left = hba->max_rqes;
+
+	setup_qp_page_tables(ep);
+
+	return 0;
+
+mem_alloc_err:
+	bnx2i_free_qp_resc(hba, ep);
+	return -ENOMEM;
+}
+
+
+
+/**
+ * bnx2i_free_qp_resc - free memory resources held by QP
+ * @hba:	adapter structure pointer
+ * @ep:	endpoint (transport indentifier) structure
+ *
+ * Free QP resources - SQ/RQ/CQ memory and page tables.
+ */
+void bnx2i_free_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+	if (ep->qp.ctx_base) {
+		iounmap(ep->qp.ctx_base);
+		ep->qp.ctx_base = NULL;
+	}
+	/* Free SQ mem */
+	if (ep->qp.sq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+				  ep->qp.sq_pgtbl_virt, ep->qp.sq_pgtbl_phys);
+		ep->qp.sq_pgtbl_virt = NULL;
+		ep->qp.sq_pgtbl_phys = 0;
+	}
+	if (ep->qp.sq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+				  ep->qp.sq_virt, ep->qp.sq_phys);
+		ep->qp.sq_virt = NULL;
+		ep->qp.sq_phys = 0;
+	}
+
+	/* Free RQ mem */
+	if (ep->qp.rq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+				  ep->qp.rq_pgtbl_virt, ep->qp.rq_pgtbl_phys);
+		ep->qp.rq_pgtbl_virt = NULL;
+		ep->qp.rq_pgtbl_phys = 0;
+	}
+	if (ep->qp.rq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+				  ep->qp.rq_virt, ep->qp.rq_phys);
+		ep->qp.rq_virt = NULL;
+		ep->qp.rq_phys = 0;
+	}
+
+	/* Free CQ mem */
+	if (ep->qp.cq_pgtbl_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+				  ep->qp.cq_pgtbl_virt, ep->qp.cq_pgtbl_phys);
+		ep->qp.cq_pgtbl_virt = NULL;
+		ep->qp.cq_pgtbl_phys = 0;
+	}
+	if (ep->qp.cq_virt) {
+		dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+				  ep->qp.cq_virt, ep->qp.cq_phys);
+		ep->qp.cq_virt = NULL;
+		ep->qp.cq_phys = 0;
+	}
+}
+
+
+/**
+ * bnx2i_send_fw_iscsi_init_msg - initiates initial handshake with iscsi f/w
+ * @hba:	adapter structure pointer
+ *
+ * Send down iscsi_init KWQEs which initiates the initial handshake with the f/w
+ * 	This results in iSCSi support validation and on-chip context manager
+ * 	initialization.  Firmware completes this handshake with a CQE carrying
+ * 	the result of iscsi support validation. Parameter carried by
+ * 	iscsi init request determines the number of offloaded connection and
+ * 	tolerance level for iscsi protocol violation this hba/chip can support
+ */
+int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
+{
+	struct kwqe *kwqe_arr[3];
+	struct iscsi_kwqe_init1 iscsi_init;
+	struct iscsi_kwqe_init2 iscsi_init2;
+	int rc = 0;
+	u64 mask64;
+
+	bnx2i_adjust_qp_size(hba);
+
+	iscsi_init.flags =
+		ISCSI_PAGE_SIZE_4K << ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT;
+	if (en_tcp_dack)
+		iscsi_init.flags |= ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE;
+	iscsi_init.reserved0 = 0;
+	iscsi_init.num_cqs = 1;
+	iscsi_init.hdr.op_code = ISCSI_KWQE_OPCODE_INIT1;
+	iscsi_init.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+	iscsi_init.dummy_buffer_addr_lo = (u32) hba->dummy_buf_dma;
+	iscsi_init.dummy_buffer_addr_hi =
+		(u32) ((u64) hba->dummy_buf_dma >> 32);
+
+	hba->ctx_ccell_tasks =
+			((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16));
+	iscsi_init.num_ccells_per_conn = hba->num_ccell;
+	iscsi_init.num_tasks_per_conn = hba->max_sqes;
+	iscsi_init.sq_wqes_per_page = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+	iscsi_init.sq_num_wqes = hba->max_sqes;
+	iscsi_init.cq_log_wqes_per_page =
+		(u8) bnx2i_power_of2(PAGE_SIZE / BNX2I_CQE_SIZE);
+	iscsi_init.cq_num_wqes = hba->max_cqes;
+	iscsi_init.cq_num_pages = (hba->max_cqes * BNX2I_CQE_SIZE +
+				   (PAGE_SIZE - 1)) / PAGE_SIZE;
+	iscsi_init.sq_num_pages = (hba->max_sqes * BNX2I_SQ_WQE_SIZE +
+				   (PAGE_SIZE - 1)) / PAGE_SIZE;
+	iscsi_init.rq_buffer_size = BNX2I_RQ_WQE_SIZE;
+	iscsi_init.rq_num_wqes = hba->max_rqes;
+
+
+	iscsi_init2.hdr.op_code = ISCSI_KWQE_OPCODE_INIT2;
+	iscsi_init2.hdr.flags =
+		(ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+	iscsi_init2.max_cq_sqn = hba->max_cqes * 2 + 1;
+	mask64 = 0x0ULL;
+	mask64 |= (
+		/* CISCO MDS */
+		(1UL <<
+		  ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV) |
+		/* HP MSA1510i */
+		(1UL <<
+		  ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) |
+		/* EMC */
+		(1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN));
+	if (error_mask1)
+		iscsi_init2.error_bit_map[0] = error_mask1;
+	else
+		iscsi_init2.error_bit_map[0] = (u32) mask64;
+
+	if (error_mask2)
+		iscsi_init2.error_bit_map[1] = error_mask2;
+	else
+		iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32);
+
+	iscsi_error_mask = mask64;
+
+	kwqe_arr[0] = (struct kwqe *) &iscsi_init;
+	kwqe_arr[1] = (struct kwqe *) &iscsi_init2;
+
+	if (hba->cnic && hba->cnic->submit_kwqes)
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 2);
+	return rc;
+}
+
+
+/**
+ * bnx2i_process_scsi_cmd_resp - this function handles scsi cmd completion.
+ * @conn:	iscsi connection
+ * @cqe:	pointer to newly DMA'ed CQE entry for processing
+ *
+ * process SCSI CMD Response CQE & complete the request to SCSI-ML
+ */
+static int bnx2i_process_scsi_cmd_resp(struct iscsi_session *session,
+				       struct bnx2i_conn *bnx2i_conn,
+				       struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_cmd_response *resp_cqe;
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct iscsi_task *task;
+	struct iscsi_cmd_rsp *hdr;
+	u32 datalen = 0;
+
+	resp_cqe = (struct bnx2i_cmd_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 resp_cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
+	if (!task)
+		goto fail;
+
+	bnx2i_cmd = task->dd_data;
+
+	if (bnx2i_cmd->req.op_attr & ISCSI_CMD_REQUEST_READ) {
+		conn->datain_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_data_outs;
+		conn->rxdata_octets +=
+			bnx2i_cmd->req.total_data_transfer_length;
+	} else {
+		conn->dataout_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_data_outs;
+		conn->r2t_pdus_cnt +=
+			resp_cqe->task_stat.read_stat.num_r2ts;
+		conn->txdata_octets +=
+			bnx2i_cmd->req.total_data_transfer_length;
+	}
+	bnx2i_iscsi_unmap_sg_list(bnx2i_cmd);
+
+	hdr = (struct iscsi_cmd_rsp *)task->hdr;
+	resp_cqe = (struct bnx2i_cmd_response *)cqe;
+	hdr->opcode = resp_cqe->op_code;
+	hdr->max_cmdsn = cpu_to_be32(resp_cqe->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(resp_cqe->exp_cmd_sn);
+	hdr->response = resp_cqe->response;
+	hdr->cmd_status = resp_cqe->status;
+	hdr->flags = resp_cqe->response_flags;
+	hdr->residual_count = cpu_to_be32(resp_cqe->residual_count);
+
+	if (resp_cqe->op_code == ISCSI_OP_SCSI_DATA_IN)
+		goto done;
+
+	if (resp_cqe->status == SAM_STAT_CHECK_CONDITION) {
+		datalen = resp_cqe->data_length;
+		if (datalen < 2)
+			goto done;
+
+		if (datalen > BNX2I_RQ_WQE_SIZE) {
+			iscsi_conn_printk(KERN_ERR, conn,
+					  "sense data len %d > RQ sz\n",
+					  datalen);
+			datalen = BNX2I_RQ_WQE_SIZE;
+		} else if (datalen > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+			iscsi_conn_printk(KERN_ERR, conn,
+					  "sense data len %d > conn data\n",
+					  datalen);
+			datalen = ISCSI_DEF_MAX_RECV_SEG_LEN;
+		}
+
+		bnx2i_get_rq_buf(bnx2i_cmd->conn, conn->data, datalen);
+		bnx2i_put_rq_buf(bnx2i_cmd->conn, 1);
+	}
+
+done:
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr,
+			     conn->data, datalen);
+fail:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_process_login_resp - this function handles iscsi login response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process Login Response CQE & complete it to open-iscsi user daemon
+ */
+static int bnx2i_process_login_resp(struct iscsi_session *session,
+				    struct bnx2i_conn *bnx2i_conn,
+				    struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_login_response *login;
+	struct iscsi_login_rsp *resp_hdr;
+	int pld_len;
+	int pad_len;
+
+	login = (struct bnx2i_login_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 login->itt & ISCSI_LOGIN_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_login_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = login->op_code;
+	resp_hdr->flags = login->response_flags;
+	resp_hdr->max_version = login->version_max;
+	resp_hdr->active_version = login->version_active;;
+	resp_hdr->hlength = 0;
+
+	hton24(resp_hdr->dlength, login->data_length);
+	memcpy(resp_hdr->isid, &login->isid_lo, 6);
+	resp_hdr->tsih = cpu_to_be16(login->tsih);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->statsn = cpu_to_be32(login->stat_sn);
+	resp_hdr->exp_cmdsn = cpu_to_be32(login->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(login->max_cmd_sn);
+	resp_hdr->status_class = login->status_class;
+	resp_hdr->status_detail = login->status_detail;
+	pld_len = login->data_length;
+	bnx2i_conn->gen_pdu.resp_wr_ptr =
+					bnx2i_conn->gen_pdu.resp_buf + pld_len;
+
+	pad_len = 0;
+	if (pld_len & 0x3)
+		pad_len = 4 - (pld_len % 4);
+
+	if (pad_len) {
+		int i = 0;
+		for (i = 0; i < pad_len; i++) {
+			bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
+			bnx2i_conn->gen_pdu.resp_wr_ptr++;
+		}
+	}
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
+		bnx2i_conn->gen_pdu.resp_buf,
+		bnx2i_conn->gen_pdu.resp_wr_ptr - bnx2i_conn->gen_pdu.resp_buf);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_tmf_resp - this function handles iscsi TMF response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI TMF Response CQE and wake up the driver eh thread.
+ */
+static int bnx2i_process_tmf_resp(struct iscsi_session *session,
+				  struct bnx2i_conn *bnx2i_conn,
+				  struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_tmf_response *tmf_cqe;
+	struct iscsi_tm_rsp *resp_hdr;
+
+	tmf_cqe = (struct bnx2i_tmf_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 tmf_cqe->itt & ISCSI_TMF_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_tm_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = tmf_cqe->op_code;
+	resp_hdr->max_cmdsn = cpu_to_be32(tmf_cqe->max_cmd_sn);
+	resp_hdr->exp_cmdsn = cpu_to_be32(tmf_cqe->exp_cmd_sn);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->response = tmf_cqe->response;
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_logout_resp - this function handles iscsi logout response
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI Logout Response CQE & make function call to
+ * notify the user daemon.
+ */
+static int bnx2i_process_logout_resp(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_logout_response *logout;
+	struct iscsi_logout_rsp *resp_hdr;
+
+	logout = (struct bnx2i_logout_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 logout->itt & ISCSI_LOGOUT_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_logout_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = logout->op_code;
+	resp_hdr->flags = logout->response;
+	resp_hdr->hlength = 0;
+
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->statsn = task->hdr->exp_statsn;
+	resp_hdr->exp_cmdsn = cpu_to_be32(logout->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(logout->max_cmd_sn);
+
+	resp_hdr->t2wait = cpu_to_be32(logout->time_to_wait);
+	resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
+
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+/**
+ * bnx2i_process_nopin_local_cmpl - this function handles iscsi nopin CQE
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI NOPIN local completion CQE, frees IIT and command structures
+ */
+static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
+					   struct bnx2i_conn *bnx2i_conn,
+					   struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_nop_in_msg *nop_in;
+	struct iscsi_task *task;
+
+	nop_in = (struct bnx2i_nop_in_msg *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+				 nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
+	if (task)
+		iscsi_put_task(task);
+	spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_unsol_pdu_adjust_rq - makes adjustments to RQ after unsol pdu is recvd
+ * @conn:	iscsi connection
+ *
+ * Firmware advances RQ producer index for every unsolicited PDU even if
+ *	payload data length is '0'. This function makes corresponding
+ *	adjustments on the driver side to match this f/w behavior
+ */
+static void bnx2i_unsol_pdu_adjust_rq(struct bnx2i_conn *bnx2i_conn)
+{
+	char dummy_rq_data[2];
+	bnx2i_get_rq_buf(bnx2i_conn, dummy_rq_data, 1);
+	bnx2i_put_rq_buf(bnx2i_conn, 1);
+}
+
+
+/**
+ * bnx2i_process_nopin_mesg - this function handles iscsi nopin CQE
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI target's proactive iSCSI NOPIN request
+ */
+static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_nop_in_msg *nop_in;
+	struct iscsi_nopin *hdr;
+	u32 itt;
+	int tgt_async_nop = 0;
+
+	nop_in = (struct bnx2i_nop_in_msg *)cqe;
+	itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
+
+	spin_lock(&session->lock);
+	hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
+	memset(hdr, 0, sizeof(struct iscsi_hdr));
+	hdr->opcode = nop_in->op_code;
+	hdr->max_cmdsn = cpu_to_be32(nop_in->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
+	hdr->ttt = cpu_to_be32(nop_in->ttt);
+
+	if (itt == (u16) RESERVED_ITT) {
+		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+		hdr->itt = RESERVED_ITT;
+		tgt_async_nop = 1;
+		goto done;
+	}
+
+	/* this is a response to one of our nop-outs */
+	task = iscsi_itt_to_task(conn, itt);
+	if (task) {
+		hdr->flags = ISCSI_FLAG_CMD_FINAL;
+		hdr->itt = task->hdr->itt;
+		hdr->ttt = cpu_to_be32(nop_in->ttt);
+		memcpy(hdr->lun, nop_in->lun, 8);
+	}
+done:
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+	spin_unlock(&session->lock);
+
+	return tgt_async_nop;
+}
+
+
+/**
+ * bnx2i_process_async_mesg - this function handles iscsi async message
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI ASYNC Message
+ */
+static void bnx2i_process_async_mesg(struct iscsi_session *session,
+				     struct bnx2i_conn *bnx2i_conn,
+				     struct cqe *cqe)
+{
+	struct bnx2i_async_msg *async_cqe;
+	struct iscsi_async *resp_hdr;
+	u8 async_event;
+
+	bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+	async_cqe = (struct bnx2i_async_msg *)cqe;
+	async_event = async_cqe->async_event;
+
+	if (async_event == ISCSI_ASYNC_MSG_SCSI_EVENT) {
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				  "async: scsi events not supported\n");
+		return;
+	}
+
+	spin_lock(&session->lock);
+	resp_hdr = (struct iscsi_async *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = async_cqe->op_code;
+	resp_hdr->flags = 0x80;
+
+	memcpy(resp_hdr->lun, async_cqe->lun, 8);
+	resp_hdr->exp_cmdsn = cpu_to_be32(async_cqe->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(async_cqe->max_cmd_sn);
+
+	resp_hdr->async_event = async_cqe->async_event;
+	resp_hdr->async_vcode = async_cqe->async_vcode;
+
+	resp_hdr->param1 = cpu_to_be16(async_cqe->param1);
+	resp_hdr->param2 = cpu_to_be16(async_cqe->param2);
+	resp_hdr->param3 = cpu_to_be16(async_cqe->param3);
+
+	__iscsi_complete_pdu(bnx2i_conn->cls_conn->dd_data,
+			     (struct iscsi_hdr *)resp_hdr, NULL, 0);
+	spin_unlock(&session->lock);
+}
+
+
+/**
+ * bnx2i_process_reject_mesg - process iscsi reject pdu
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI REJECT message
+ */
+static void bnx2i_process_reject_mesg(struct iscsi_session *session,
+				      struct bnx2i_conn *bnx2i_conn,
+				      struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct bnx2i_reject_msg *reject;
+	struct iscsi_reject *hdr;
+
+	reject = (struct bnx2i_reject_msg *) cqe;
+	if (reject->data_length) {
+		bnx2i_get_rq_buf(bnx2i_conn, conn->data, reject->data_length);
+		bnx2i_put_rq_buf(bnx2i_conn, 1);
+	} else
+		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+	spin_lock(&session->lock);
+	hdr = (struct iscsi_reject *) &bnx2i_conn->gen_pdu.resp_hdr;
+	memset(hdr, 0, sizeof(struct iscsi_hdr));
+	hdr->opcode = reject->op_code;
+	hdr->reason = reject->reason;
+	hton24(hdr->dlength, reject->data_length);
+	hdr->max_cmdsn = cpu_to_be32(reject->max_cmd_sn);
+	hdr->exp_cmdsn = cpu_to_be32(reject->exp_cmd_sn);
+	hdr->ffffffff = cpu_to_be32(RESERVED_ITT);
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, conn->data,
+			     reject->data_length);
+	spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_process_cmd_cleanup_resp - process scsi command clean-up completion
+ * @session:		iscsi session pointer
+ * @bnx2i_conn:		iscsi connection pointer
+ * @cqe:		pointer to newly DMA'ed CQE entry for processing
+ *
+ * process command cleanup response CQE during conn shutdown or error recovery
+ */
+static void bnx2i_process_cmd_cleanup_resp(struct iscsi_session *session,
+					   struct bnx2i_conn *bnx2i_conn,
+					   struct cqe *cqe)
+{
+	struct bnx2i_cleanup_response *cmd_clean_rsp;
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+
+	cmd_clean_rsp = (struct bnx2i_cleanup_response *)cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn,
+			cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+	if (!task)
+		printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
+			cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+	spin_unlock(&session->lock);
+	complete(&bnx2i_conn->cmd_cleanup_cmpl);
+}
+
+
+
+/**
+ * bnx2i_process_new_cqes - process newly DMA'ed CQE's
+ * @bnx2i_conn:		iscsi connection
+ *
+ * this function is called by generic KCQ handler to process all pending CQE's
+ */
+static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_session *session = conn->session;
+	struct qp_info *qp = &bnx2i_conn->ep->qp;
+	struct bnx2i_nop_in_msg *nopin;
+	int tgt_async_msg;
+
+	while (1) {
+		nopin = (struct bnx2i_nop_in_msg *) qp->cq_cons_qe;
+		if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
+			break;
+
+		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+			break;
+
+		tgt_async_msg = 0;
+
+		switch (nopin->op_code) {
+		case ISCSI_OP_SCSI_CMD_RSP:
+		case ISCSI_OP_SCSI_DATA_IN:
+			bnx2i_process_scsi_cmd_resp(session, bnx2i_conn,
+						    qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_LOGIN_RSP:
+			bnx2i_process_login_resp(session, bnx2i_conn,
+						 qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_SCSI_TMFUNC_RSP:
+			bnx2i_process_tmf_resp(session, bnx2i_conn,
+					       qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_LOGOUT_RSP:
+			bnx2i_process_logout_resp(session, bnx2i_conn,
+						  qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_NOOP_IN:
+			if (bnx2i_process_nopin_mesg(session, bnx2i_conn,
+						     qp->cq_cons_qe))
+				tgt_async_msg = 1;
+			break;
+		case ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION:
+			bnx2i_process_nopin_local_cmpl(session, bnx2i_conn,
+						       qp->cq_cons_qe);
+			break;
+		case ISCSI_OP_ASYNC_EVENT:
+			bnx2i_process_async_mesg(session, bnx2i_conn,
+						 qp->cq_cons_qe);
+			tgt_async_msg = 1;
+			break;
+		case ISCSI_OP_REJECT:
+			bnx2i_process_reject_mesg(session, bnx2i_conn,
+						  qp->cq_cons_qe);
+			break;
+		case ISCSI_OPCODE_CLEANUP_RESPONSE:
+			bnx2i_process_cmd_cleanup_resp(session, bnx2i_conn,
+						       qp->cq_cons_qe);
+			break;
+		default:
+			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+					  nopin->op_code);
+		}
+
+		if (!tgt_async_msg)
+			bnx2i_conn->ep->num_active_cmds--;
+
+		/* clear out in production version only, till beta keep opcode
+		 * field intact, will be helpful in debugging (context dump)
+		 * nopin->op_code = 0;
+		 */
+		qp->cqe_exp_seq_sn++;
+		if (qp->cqe_exp_seq_sn == (qp->cqe_size * 2 + 1))
+			qp->cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+
+		if (qp->cq_cons_qe == qp->cq_last_qe) {
+			qp->cq_cons_qe = qp->cq_first_qe;
+			qp->cq_cons_idx = 0;
+		} else {
+			qp->cq_cons_qe++;
+			qp->cq_cons_idx++;
+		}
+	}
+	bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+}
+
+/**
+ * bnx2i_fastpath_notification - process global event queue (KCQ)
+ * @hba:		adapter structure pointer
+ * @new_cqe_kcqe:	pointer to newly DMA'ed KCQE entry
+ *
+ * Fast path event notification handler, KCQ entry carries context id
+ *	of the connection that has 1 or more pending CQ entries
+ */
+static void bnx2i_fastpath_notification(struct bnx2i_hba *hba,
+					struct iscsi_kcqe *new_cqe_kcqe)
+{
+	struct bnx2i_conn *conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = new_cqe_kcqe->iscsi_conn_id;
+	conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!conn) {
+		printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
+		return;
+	}
+	if (!conn->ep) {
+		printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
+		return;
+	}
+
+	bnx2i_process_new_cqes(conn);
+}
+
+
+/**
+ * bnx2i_process_update_conn_cmpl - process iscsi conn update completion KCQE
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * CONN_UPDATE completion handler, this completes iSCSI connection FFP migration
+ */
+static void bnx2i_process_update_conn_cmpl(struct bnx2i_hba *hba,
+					   struct iscsi_kcqe *update_kcqe)
+{
+	struct bnx2i_conn *conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = update_kcqe->iscsi_conn_id;
+	conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!conn) {
+		printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
+		return;
+	}
+	if (!conn->ep) {
+		printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
+		return;
+	}
+
+	if (update_kcqe->completion_status) {
+		printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
+		conn->ep->state = EP_STATE_ULP_UPDATE_FAILED;
+	} else
+		conn->ep->state = EP_STATE_ULP_UPDATE_COMPL;
+
+	wake_up_interruptible(&conn->ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_recovery_que_add_conn - add connection to recovery queue
+ * @hba:		adapter structure pointer
+ * @bnx2i_conn:		iscsi connection
+ *
+ * Add connection to recovery queue and schedule adapter eh worker
+ */
+static void bnx2i_recovery_que_add_conn(struct bnx2i_hba *hba,
+					struct bnx2i_conn *bnx2i_conn)
+{
+	iscsi_conn_failure(bnx2i_conn->cls_conn->dd_data,
+			   ISCSI_ERR_CONN_FAILED);
+}
+
+
+/**
+ * bnx2i_process_tcp_error - process error notification on a given connection
+ *
+ * @hba: 		adapter structure pointer
+ * @tcp_err: 		tcp error kcqe pointer
+ *
+ * handles tcp level error notifications from FW.
+ */
+static void bnx2i_process_tcp_error(struct bnx2i_hba *hba,
+				    struct iscsi_kcqe *tcp_err)
+{
+	struct bnx2i_conn *bnx2i_conn;
+	u32 iscsi_cid;
+
+	iscsi_cid = tcp_err->iscsi_conn_id;
+	bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+	if (!bnx2i_conn) {
+		printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+		return;
+	}
+
+	printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
+			  iscsi_cid, tcp_err->completion_status);
+	bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+}
+
+
+/**
+ * bnx2i_process_iscsi_error - process error notification on a given connection
+ * @hba:		adapter structure pointer
+ * @iscsi_err:		iscsi error kcqe pointer
+ *
+ * handles iscsi error notifications from the FW. Firmware based in initial
+ *	handshake classifies iscsi protocol / TCP rfc violation into either
+ *	warning or error indications. If indication is of "Error" type, driver
+ *	will initiate session recovery for that connection/session. For
+ *	"Warning" type indication, driver will put out a system log message
+ *	(there will be only one message for each type for the life of the
+ *	session, this is to avoid un-necessarily overloading the system)
+ */
+static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba,
+				      struct iscsi_kcqe *iscsi_err)
+{
+	struct bnx2i_conn *bnx2i_conn;
+	u32 iscsi_cid;
+	char warn_notice[] = "iscsi_warning";
+	char error_notice[] = "iscsi_error";
+	char additional_notice[64];
+	char *message;
+	int need_recovery;
+	u64 err_mask64;
+
+	iscsi_cid = iscsi_err->iscsi_conn_id;
+	bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+	if (!bnx2i_conn) {
+		printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+		return;
+	}
+
+	err_mask64 = (0x1ULL << iscsi_err->completion_status);
+
+	if (err_mask64 & iscsi_error_mask) {
+		need_recovery = 0;
+		message = warn_notice;
+	} else {
+		need_recovery = 1;
+		message = error_notice;
+	}
+
+	switch (iscsi_err->completion_status) {
+	case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR:
+		strcpy(additional_notice, "hdr digest err");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR:
+		strcpy(additional_notice, "data digest err");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE:
+		strcpy(additional_notice, "wrong opcode rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN:
+		strcpy(additional_notice, "AHS len > 0 rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT:
+		strcpy(additional_notice, "invalid ITT rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN:
+		strcpy(additional_notice, "wrong StatSN rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN:
+		strcpy(additional_notice, "wrong DataSN rcvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T:
+		strcpy(additional_notice, "pend R2T violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0:
+		strcpy(additional_notice, "ERL0, UO");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1:
+		strcpy(additional_notice, "ERL0, U1");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2:
+		strcpy(additional_notice, "ERL0, U2");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3:
+		strcpy(additional_notice, "ERL0, U3");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4:
+		strcpy(additional_notice, "ERL0, U4");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5:
+		strcpy(additional_notice, "ERL0, U5");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6:
+		strcpy(additional_notice, "ERL0, U6");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN:
+		strcpy(additional_notice, "invalid resi len");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN:
+		strcpy(additional_notice, "MRDSL violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO:
+		strcpy(additional_notice, "F-bit not set");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV:
+		strcpy(additional_notice, "invalid TTT");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN:
+		strcpy(additional_notice, "invalid DataSN");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN:
+		strcpy(additional_notice, "burst len violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF:
+		strcpy(additional_notice, "buf offset violation");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN:
+		strcpy(additional_notice, "invalid LUN field");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN:
+		strcpy(additional_notice, "invalid R2TSN field");
+		break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0
+	case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0:
+		strcpy(additional_notice, "invalid cmd len1");
+		break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1
+	case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1:
+		strcpy(additional_notice, "invalid cmd len2");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED:
+		strcpy(additional_notice,
+		       "pend r2t exceeds MaxOutstandingR2T value");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV:
+		strcpy(additional_notice, "TTT is rsvd");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN:
+		strcpy(additional_notice, "MBL violation");
+		break;
+#define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO 	\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO
+	case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO:
+		strcpy(additional_notice, "data seg len != 0");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN:
+		strcpy(additional_notice, "reject pdu len error");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN:
+		strcpy(additional_notice, "async pdu len error");
+		break;
+	case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN:
+		strcpy(additional_notice, "nopin pdu len error");
+		break;
+#define BNX2_ERR_PEND_R2T_IN_CLEANUP			\
+	ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP
+	case BNX2_ERR_PEND_R2T_IN_CLEANUP:
+		strcpy(additional_notice, "pend r2t in cleanup");
+		break;
+
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT:
+		strcpy(additional_notice, "IP fragments rcvd");
+		break;
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS:
+		strcpy(additional_notice, "IP options error");
+		break;
+	case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG:
+		strcpy(additional_notice, "urgent flag error");
+		break;
+	default:
+		printk(KERN_ALERT "iscsi_err - unknown err %x\n",
+				  iscsi_err->completion_status);
+	}
+
+	if (need_recovery) {
+		iscsi_conn_printk(KERN_ALERT,
+				  bnx2i_conn->cls_conn->dd_data,
+				  "bnx2i: %s - %s\n",
+				  message, additional_notice);
+
+		iscsi_conn_printk(KERN_ALERT,
+				  bnx2i_conn->cls_conn->dd_data,
+				  "conn_err - hostno %d conn %p, "
+				  "iscsi_cid %x cid %x\n",
+				  bnx2i_conn->hba->shost->host_no,
+				  bnx2i_conn, bnx2i_conn->ep->ep_iscsi_cid,
+				  bnx2i_conn->ep->ep_cid);
+		bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+	} else
+		if (!test_and_set_bit(iscsi_err->completion_status,
+				      (void *) &bnx2i_conn->violation_notified))
+			iscsi_conn_printk(KERN_ALERT,
+					  bnx2i_conn->cls_conn->dd_data,
+					  "bnx2i: %s - %s\n",
+					  message, additional_notice);
+}
+
+
+/**
+ * bnx2i_process_conn_destroy_cmpl - process iscsi conn destroy completion
+ * @hba:		adapter structure pointer
+ * @conn_destroy:	conn destroy kcqe pointer
+ *
+ * handles connection destroy completion request.
+ */
+static void bnx2i_process_conn_destroy_cmpl(struct bnx2i_hba *hba,
+					    struct iscsi_kcqe *conn_destroy)
+{
+	struct bnx2i_endpoint *ep;
+
+	ep = bnx2i_find_ep_in_destroy_list(hba, conn_destroy->iscsi_conn_id);
+	if (!ep) {
+		printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
+				  "offload request, unexpected complection\n");
+		return;
+	}
+
+	if (hba != ep->hba) {
+		printk(KERN_ALERT "conn destroy- error hba mis-match\n");
+		return;
+	}
+
+	if (conn_destroy->completion_status) {
+		printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
+		ep->state = EP_STATE_CLEANUP_FAILED;
+	} else
+		ep->state = EP_STATE_CLEANUP_CMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_process_ofld_cmpl - process initial iscsi conn offload completion
+ * @hba:		adapter structure pointer
+ * @ofld_kcqe:		conn offload kcqe pointer
+ *
+ * handles initial connection offload completion, ep_connect() thread is
+ *	woken-up to continue with LLP connect process
+ */
+static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
+				    struct iscsi_kcqe *ofld_kcqe)
+{
+	u32 cid_addr;
+	struct bnx2i_endpoint *ep;
+	u32 cid_num;
+
+	ep = bnx2i_find_ep_in_ofld_list(hba, ofld_kcqe->iscsi_conn_id);
+	if (!ep) {
+		printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
+		return;
+	}
+
+	if (hba != ep->hba) {
+		printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n");
+		return;
+	}
+
+	if (ofld_kcqe->completion_status) {
+		if (ofld_kcqe->completion_status ==
+		    ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
+			printk(KERN_ALERT "bnx2i: unable to allocate"
+					  " iSCSI context resources\n");
+		ep->state = EP_STATE_OFLD_FAILED;
+	} else {
+		ep->state = EP_STATE_OFLD_COMPL;
+		cid_addr = ofld_kcqe->iscsi_conn_context_id;
+		cid_num = bnx2i_get_cid_num(ep);
+		ep->ep_cid = cid_addr;
+		ep->qp.ctx_base = NULL;
+	}
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+/**
+ * bnx2i_indicate_kcqe - process iscsi conn update completion KCQE
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * Generic KCQ event handler/dispatcher
+ */
+static void bnx2i_indicate_kcqe(void *context, struct kcqe *kcqe[],
+				u32 num_cqe)
+{
+	struct bnx2i_hba *hba = context;
+	int i = 0;
+	struct iscsi_kcqe *ikcqe = NULL;
+
+	while (i < num_cqe) {
+		ikcqe = (struct iscsi_kcqe *) kcqe[i++];
+
+		if (ikcqe->op_code ==
+		    ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION)
+			bnx2i_fastpath_notification(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_OFFLOAD_CONN)
+			bnx2i_process_ofld_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_UPDATE_CONN)
+			bnx2i_process_update_conn_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_INIT) {
+			if (ikcqe->completion_status !=
+			    ISCSI_KCQE_COMPLETION_STATUS_SUCCESS)
+				bnx2i_iscsi_license_error(hba, ikcqe->\
+							  completion_status);
+			else {
+				set_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+				bnx2i_get_link_state(hba);
+				printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
+						 "ISCSI_INIT passed\n",
+						 (u8)hba->pcidev->bus->number,
+						 hba->pci_devno,
+						 (u8)hba->pci_func);
+
+
+			}
+		} else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_DESTROY_CONN)
+			bnx2i_process_conn_destroy_cmpl(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_ISCSI_ERROR)
+			bnx2i_process_iscsi_error(hba, ikcqe);
+		else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_TCP_ERROR)
+			bnx2i_process_tcp_error(hba, ikcqe);
+		else
+			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+					  ikcqe->op_code);
+	}
+}
+
+
+/**
+ * bnx2i_indicate_netevent - Generic netdev event handler
+ * @context:	adapter structure pointer
+ * @event:	event type
+ *
+ * Handles four netdev events, NETDEV_UP, NETDEV_DOWN,
+ *	NETDEV_GOING_DOWN and NETDEV_CHANGE
+ */
+static void bnx2i_indicate_netevent(void *context, unsigned long event)
+{
+	struct bnx2i_hba *hba = context;
+
+	switch (event) {
+	case NETDEV_UP:
+		if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+			bnx2i_send_fw_iscsi_init_msg(hba);
+		break;
+	case NETDEV_DOWN:
+		clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+		clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+		break;
+	case NETDEV_GOING_DOWN:
+		set_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+		break;
+	case NETDEV_CHANGE:
+		bnx2i_get_link_state(hba);
+		break;
+	default:
+		;
+	}
+}
+
+
+/**
+ * bnx2i_cm_connect_cmpl - process iscsi conn establishment completion
+ * @cm_sk: 		cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 TCP connect request.
+ */
+static void bnx2i_cm_connect_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+		ep->state = EP_STATE_CONNECT_FAILED;
+	else if (test_bit(SK_F_OFFLD_COMPLETE, &cm_sk->flags))
+		ep->state = EP_STATE_CONNECT_COMPL;
+	else
+		ep->state = EP_STATE_CONNECT_FAILED;
+
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_close_cmpl - process tcp conn close completion
+ * @cm_sk:	cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 graceful TCP connect shutdown
+ */
+static void bnx2i_cm_close_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_DISCONN_COMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_abort_cmpl - process abortive tcp conn teardown completion
+ * @cm_sk:	cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate completion of option-2 abortive TCP connect termination
+ */
+static void bnx2i_cm_abort_cmpl(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_DISCONN_COMPL;
+	wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_remote_close - process received TCP FIN
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to indicate
+ *	async TCP events such as FIN
+ */
+static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_TCP_FIN_RCVD;
+	if (ep->conn)
+		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+/**
+ * bnx2i_cm_remote_abort - process TCP RST and start conn cleanup
+ * @hba:		adapter structure pointer
+ * @update_kcqe:	kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *	indicate async TCP events (RST) sent by the peer.
+ */
+static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
+{
+	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+	ep->state = EP_STATE_TCP_RST_RCVD;
+	if (ep->conn)
+		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+
+static void bnx2i_send_nl_mesg(struct cnic_dev *dev, u32 msg_type,
+			       char *buf, u16 buflen)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba)
+		return;
+
+	if (iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
+				   msg_type, buf, buflen))
+		printk(KERN_ALERT "bnx2i: private nl message send error\n");
+
+}
+
+
+/**
+ * bnx2i_cnic_cb - global template of bnx2i - cnic driver interface structure
+ *			carrying callback function pointers
+ *
+ */
+struct cnic_ulp_ops bnx2i_cnic_cb = {
+	.cnic_init = bnx2i_ulp_init,
+	.cnic_exit = bnx2i_ulp_exit,
+	.cnic_start = bnx2i_start,
+	.cnic_stop = bnx2i_stop,
+	.indicate_kcqes = bnx2i_indicate_kcqe,
+	.indicate_netevent = bnx2i_indicate_netevent,
+	.cm_connect_complete = bnx2i_cm_connect_cmpl,
+	.cm_close_complete = bnx2i_cm_close_cmpl,
+	.cm_abort_complete = bnx2i_cm_abort_cmpl,
+	.cm_remote_close = bnx2i_cm_remote_close,
+	.cm_remote_abort = bnx2i_cm_remote_abort,
+	.iscsi_nl_send_msg = bnx2i_send_nl_mesg,
+	.owner = THIS_MODULE
+};
+
+
+/**
+ * bnx2i_map_ep_dbell_regs - map connection doorbell registers
+ * @ep: bnx2i endpoint
+ *
+ * maps connection's SQ and RQ doorbell registers, 5706/5708/5709 hosts these
+ *	register in BAR #0. Whereas in 57710 these register are accessed by
+ *	mapping BAR #1
+ */
+int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
+{
+	u32 cid_num;
+	u32 reg_off;
+	u32 first_l4l5;
+	u32 ctx_sz;
+	u32 config2;
+	resource_size_t reg_base;
+
+	cid_num = bnx2i_get_cid_num(ep);
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+		reg_base = pci_resource_start(ep->hba->pcidev,
+					      BNX2X_DOORBELL_PCI_BAR);
+		reg_off = PAGE_SIZE * (cid_num & 0x1FFFF) + DPM_TRIGER_TYPE;
+		ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
+		goto arm_cq;
+	}
+
+	reg_base = ep->hba->netdev->base_addr;
+	if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
+	    (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
+		config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
+		first_l4l5 = config2 & BNX2_MQ_CONFIG2_FIRST_L4L5;
+		ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
+		if (ctx_sz)
+			reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
+				  + PAGE_SIZE *
+				  (((cid_num - first_l4l5) / ctx_sz) + 256);
+		else
+			reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+	} else
+		/* 5709 device in normal node and 5706/5708 devices */
+		reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+
+	ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+					  MB_KERNEL_CTX_SIZE);
+	if (!ep->qp.ctx_base)
+		return -ENOMEM;
+
+arm_cq:
+	bnx2i_arm_cq_event_coalescing(ep, CNIC_ARM_CQE);
+	return 0;
+}
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 00000000000..ae4b2d588fd
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,438 @@
+/* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+static int bnx2i_reg_device;
+
+#define DRV_MODULE_NAME		"bnx2i"
+#define DRV_MODULE_VERSION	"2.0.1d"
+#define DRV_MODULE_RELDATE	"Mar 25, 2009"
+
+static char version[] __devinitdata =
+		"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+		" v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_RWLOCK(bnx2i_dev_lock);
+
+unsigned int event_coal_div = 1;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, int, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, int, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: 		Adapter structure pointer
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ *	queue mailbox register access method, 5709 requires driver to
+ *	access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba)
+{
+	hba->cnic_dev_type = 0;
+	if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
+		set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
+		set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
+	    (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
+		set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+		hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+	} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+		set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+	struct bnx2i_hba *hba = NULL;
+	struct bnx2i_hba *tmp_hba;
+
+	if (!adapter_count)
+		goto hba_not_found;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry(tmp_hba, &adapter_list, link) {
+		if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+			hba = tmp_hba;
+			break;
+		}
+	}
+	read_unlock(&bnx2i_dev_lock);
+hba_not_found:
+	return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic:	pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+		if (hba->cnic == cnic) {
+			read_unlock(&bnx2i_dev_lock);
+			return hba;
+		}
+	}
+	read_unlock(&bnx2i_dev_lock);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ *	firmware handshake to enable/initialize on chip iscsi components
+ * 	This bnx2i - cnic interface api callback is issued after following
+ *	2 conditions are met -
+ *	  a) underlying network interface is up (marked by event 'NETDEV_UP'
+ *		from netdev
+ *	  b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME	(1000 / HZ)
+	struct bnx2i_hba *hba = handle;
+	int i = HZ;
+
+	bnx2i_send_fw_iscsi_init_msg(hba);
+	while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+		msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ *	the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+	struct bnx2i_hba *hba = handle;
+
+	/* check if cleanup happened in GOING_DOWN context */
+	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
+				&hba->adapter_state))
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+}
+
+/**
+ * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
+ * @hba:	Adapter instance to register
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding the
+ *	adapter structure lock
+ */
+void bnx2i_register_device(struct bnx2i_hba *hba)
+{
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+	    test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		return;
+	}
+
+	hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
+
+	spin_lock(&hba->lock);
+	bnx2i_reg_device++;
+	spin_unlock(&hba->lock);
+
+	set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+
+/**
+ * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
+ *
+ * registers all bnx2i adapter instances with the cnic driver while holding
+ *	the global resource lock
+ */
+void bnx2i_reg_dev_all(void)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link)
+		bnx2i_register_device(hba);
+	read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
+ * @hba:	Adapter instance to unregister
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding
+ *	the adapter structure lock
+ */
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
+{
+	if (hba->ofld_conns_active ||
+	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
+	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
+		return;
+
+	hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+
+	spin_lock(&hba->lock);
+	bnx2i_reg_device--;
+	spin_unlock(&hba->lock);
+
+	/* ep_disconnect could come before NETDEV_DOWN, driver won't
+	 * see NETDEV_DOWN as it already unregistered itself.
+	 */
+	hba->adapter_state = 0;
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+/**
+ * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
+ *
+ * unregisters all bnx2i adapter instances with the cnic driver while holding
+ *	the global resource lock
+ */
+void bnx2i_unreg_dev_all(void)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	read_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link)
+		bnx2i_unreg_one_device(hba);
+	read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba:	bnx2i adapter instance
+ * @cnic:	cnic device handle
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	below. This routine is called from cnic_register_driver() context and
+ *	work horse thread which does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+	int rc;
+
+	read_lock(&bnx2i_dev_lock);
+	if (bnx2i_reg_device &&
+	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+		if (rc)		/* duplicate registration */
+			printk(KERN_ERR "bnx2i- dev reg failed\n");
+
+		spin_lock(&hba->lock);
+		bnx2i_reg_device++;
+		hba->age++;
+		spin_unlock(&hba->lock);
+
+		set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	}
+	read_unlock(&bnx2i_dev_lock);
+
+	write_lock(&bnx2i_dev_lock);
+	list_add_tail(&hba->link, &adapter_list);
+	adapter_count++;
+	write_unlock(&bnx2i_dev_lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev:	cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ *	cnic devices. This routine allocate adapter structure and other
+ *	device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	/* Allocate a HBA structure for this device */
+	hba = bnx2i_alloc_hba(dev);
+	if (!hba) {
+		printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+		return;
+	}
+
+	/* Get PCI related information and update hba struct members */
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	if (bnx2i_init_one(hba, dev)) {
+		printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+		bnx2i_free_hba(hba);
+	} else
+		hba->cnic = dev;
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev:	cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba) {
+		printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+				 "found, dev 0x%p\n", dev);
+		return;
+	}
+	write_lock(&bnx2i_dev_lock);
+	list_del_init(&hba->link);
+	adapter_count--;
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+		clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+
+		spin_lock(&hba->lock);
+		bnx2i_reg_device--;
+		spin_unlock(&hba->lock);
+	}
+	write_unlock(&bnx2i_dev_lock);
+
+	bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ *	tcp port manager/queue, sysfs. finally driver will register itself
+ *	with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+	int err;
+
+	printk(KERN_INFO "%s", version);
+
+	if (!is_power_of_2(sq_size))
+		sq_size = roundup_pow_of_two(sq_size);
+
+	bnx2i_scsi_xport_template =
+			iscsi_register_transport(&bnx2i_iscsi_transport);
+	if (!bnx2i_scsi_xport_template) {
+		printk(KERN_ERR "Could not register bnx2i transport.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+	if (err) {
+		printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+		goto unreg_xport;
+	}
+
+	return 0;
+
+unreg_xport:
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+	return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	in this function. Driver will browse through the adapter list, cleans-up
+ *	each instance, unregisters iscsi transport name and finally driver will
+ *	unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+	struct bnx2i_hba *hba;
+
+	write_lock(&bnx2i_dev_lock);
+	while (!list_empty(&adapter_list)) {
+		hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+		list_del(&hba->link);
+		adapter_count--;
+
+		if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+			hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+			clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+			bnx2i_reg_device--;
+		}
+
+		write_unlock(&bnx2i_dev_lock);
+		bnx2i_free_hba(hba);
+		write_lock(&bnx2i_dev_lock);
+	}
+	write_unlock(&bnx2i_dev_lock);
+
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+	cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
new file mode 100644
index 00000000000..f7412196f2f
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -0,0 +1,2064 @@
+/*
+ * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+struct scsi_transport_template *bnx2i_scsi_xport_template;
+struct iscsi_transport bnx2i_iscsi_transport;
+static struct scsi_host_template bnx2i_host_template;
+
+/*
+ * Global endpoint resource info
+ */
+static DEFINE_SPINLOCK(bnx2i_resc_lock); /* protects global resources */
+
+
+static int bnx2i_adapter_ready(struct bnx2i_hba *hba)
+{
+	int retval = 0;
+
+	if (!hba || !test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+	    test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+		retval = -EPERM;
+	return retval;
+}
+
+/**
+ * bnx2i_get_write_cmd_bd_idx - identifies various BD bookmarks
+ * @cmd:		iscsi cmd struct pointer
+ * @buf_off:		absolute buffer offset
+ * @start_bd_off:	u32 pointer to return the offset within the BD
+ *			indicated by 'start_bd_idx' on which 'buf_off' falls
+ * @start_bd_idx:	index of the BD on which 'buf_off' falls
+ *
+ * identifies & marks various bd info for scsi command's imm data,
+ * unsolicited data and the first solicited data seq.
+ */
+static void bnx2i_get_write_cmd_bd_idx(struct bnx2i_cmd *cmd, u32 buf_off,
+				       u32 *start_bd_off, u32 *start_bd_idx)
+{
+	struct iscsi_bd *bd_tbl = cmd->io_tbl.bd_tbl;
+	u32 cur_offset = 0;
+	u32 cur_bd_idx = 0;
+
+	if (buf_off) {
+		while (buf_off >= (cur_offset + bd_tbl->buffer_length)) {
+			cur_offset += bd_tbl->buffer_length;
+			cur_bd_idx++;
+			bd_tbl++;
+		}
+	}
+
+	*start_bd_off = buf_off - cur_offset;
+	*start_bd_idx = cur_bd_idx;
+}
+
+/**
+ * bnx2i_setup_write_cmd_bd_info - sets up BD various information
+ * @task:	transport layer's cmd struct pointer
+ *
+ * identifies & marks various bd info for scsi command's immediate data,
+ * unsolicited data and first solicited data seq which includes BD start
+ * index & BD buf off. his function takes into account iscsi parameter such
+ * as immediate data and unsolicited data is support on this connection.
+ */
+static void bnx2i_setup_write_cmd_bd_info(struct iscsi_task *task)
+{
+	struct bnx2i_cmd *cmd = task->dd_data;
+	u32 start_bd_offset;
+	u32 start_bd_idx;
+	u32 buffer_offset = 0;
+	u32 cmd_len = cmd->req.total_data_transfer_length;
+
+	/* if ImmediateData is turned off & IntialR2T is turned on,
+	 * there will be no immediate or unsolicited data, just return.
+	 */
+	if (!iscsi_task_has_unsol_data(task) && !task->imm_count)
+		return;
+
+	/* Immediate data */
+	buffer_offset += task->imm_count;
+	if (task->imm_count == cmd_len)
+		return;
+
+	if (iscsi_task_has_unsol_data(task)) {
+		bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+					   &start_bd_offset, &start_bd_idx);
+		cmd->req.ud_buffer_offset = start_bd_offset;
+		cmd->req.ud_start_bd_index = start_bd_idx;
+		buffer_offset += task->unsol_r2t.data_length;
+	}
+
+	if (buffer_offset != cmd_len) {
+		bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+					   &start_bd_offset, &start_bd_idx);
+		if ((start_bd_offset > task->conn->session->first_burst) ||
+		    (start_bd_idx > scsi_sg_count(cmd->scsi_cmd))) {
+			int i = 0;
+
+			iscsi_conn_printk(KERN_ALERT, task->conn,
+					  "bnx2i- error, buf offset 0x%x "
+					  "bd_valid %d use_sg %d\n",
+					  buffer_offset, cmd->io_tbl.bd_valid,
+					  scsi_sg_count(cmd->scsi_cmd));
+			for (i = 0; i < cmd->io_tbl.bd_valid; i++)
+				iscsi_conn_printk(KERN_ALERT, task->conn,
+						  "bnx2i err, bd[%d]: len %x\n",
+						  i, cmd->io_tbl.bd_tbl[i].\
+						  buffer_length);
+		}
+		cmd->req.sd_buffer_offset = start_bd_offset;
+		cmd->req.sd_start_bd_index = start_bd_idx;
+	}
+}
+
+
+
+/**
+ * bnx2i_map_scsi_sg - maps IO buffer and prepares the BD table
+ * @hba:	adapter instance
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * map SG list
+ */
+static int bnx2i_map_scsi_sg(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+	struct scsi_cmnd *sc = cmd->scsi_cmd;
+	struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+	struct scatterlist *sg;
+	int byte_count = 0;
+	int bd_count = 0;
+	int sg_count;
+	int sg_len;
+	u64 addr;
+	int i;
+
+	BUG_ON(scsi_sg_count(sc) > ISCSI_MAX_BDS_PER_CMD);
+
+	sg_count = scsi_dma_map(sc);
+
+	scsi_for_each_sg(sc, sg, sg_count, i) {
+		sg_len = sg_dma_len(sg);
+		addr = (u64) sg_dma_address(sg);
+		bd[bd_count].buffer_addr_lo = addr & 0xffffffff;
+		bd[bd_count].buffer_addr_hi = addr >> 32;
+		bd[bd_count].buffer_length = sg_len;
+		bd[bd_count].flags = 0;
+		if (bd_count == 0)
+			bd[bd_count].flags = ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+		byte_count += sg_len;
+		bd_count++;
+	}
+
+	if (bd_count)
+		bd[bd_count - 1].flags |= ISCSI_BD_LAST_IN_BD_CHAIN;
+
+	BUG_ON(byte_count != scsi_bufflen(sc));
+	return bd_count;
+}
+
+/**
+ * bnx2i_iscsi_map_sg_list - maps SG list
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * creates BD list table for the command
+ */
+static void bnx2i_iscsi_map_sg_list(struct bnx2i_cmd *cmd)
+{
+	int bd_count;
+
+	bd_count  = bnx2i_map_scsi_sg(cmd->conn->hba, cmd);
+	if (!bd_count) {
+		struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+
+		bd[0].buffer_addr_lo = bd[0].buffer_addr_hi = 0;
+		bd[0].buffer_length = bd[0].flags = 0;
+	}
+	cmd->io_tbl.bd_valid = bd_count;
+}
+
+
+/**
+ * bnx2i_iscsi_unmap_sg_list - unmaps SG list
+ * @cmd:	iscsi cmd struct pointer
+ *
+ * unmap IO buffers and invalidate the BD table
+ */
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd)
+{
+	struct scsi_cmnd *sc = cmd->scsi_cmd;
+
+	if (cmd->io_tbl.bd_valid && sc) {
+		scsi_dma_unmap(sc);
+		cmd->io_tbl.bd_valid = 0;
+	}
+}
+
+static void bnx2i_setup_cmd_wqe_template(struct bnx2i_cmd *cmd)
+{
+	memset(&cmd->req, 0x00, sizeof(cmd->req));
+	cmd->req.op_code = 0xFF;
+	cmd->req.bd_list_addr_lo = (u32) cmd->io_tbl.bd_tbl_dma;
+	cmd->req.bd_list_addr_hi =
+		(u32) ((u64) cmd->io_tbl.bd_tbl_dma >> 32);
+
+}
+
+
+/**
+ * bnx2i_bind_conn_to_iscsi_cid - bind conn structure to 'iscsi_cid'
+ * @hba:	pointer to adapter instance
+ * @conn:	pointer to iscsi connection
+ * @iscsi_cid:	iscsi context ID, range 0 - (MAX_CONN - 1)
+ *
+ * update iscsi cid table entry with connection pointer. This enables
+ *	driver to quickly get hold of connection structure pointer in
+ *	completion/interrupt thread using iscsi context ID
+ */
+static int bnx2i_bind_conn_to_iscsi_cid(struct bnx2i_hba *hba,
+					struct bnx2i_conn *bnx2i_conn,
+					u32 iscsi_cid)
+{
+	if (hba && hba->cid_que.conn_cid_tbl[iscsi_cid]) {
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				 "conn bind - entry #%d not free\n", iscsi_cid);
+		return -EBUSY;
+	}
+
+	hba->cid_que.conn_cid_tbl[iscsi_cid] = bnx2i_conn;
+	return 0;
+}
+
+
+/**
+ * bnx2i_get_conn_from_id - maps an iscsi cid to corresponding conn ptr
+ * @hba:	pointer to adapter instance
+ * @iscsi_cid:	iscsi context ID, range 0 - (MAX_CONN - 1)
+ */
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+					  u16 iscsi_cid)
+{
+	if (!hba->cid_que.conn_cid_tbl) {
+		printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n");
+		return NULL;
+
+	} else if (iscsi_cid >= hba->max_active_conns) {
+		printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid);
+		return NULL;
+	}
+	return hba->cid_que.conn_cid_tbl[iscsi_cid];
+}
+
+
+/**
+ * bnx2i_alloc_iscsi_cid - allocates a iscsi_cid from free pool
+ * @hba:	pointer to adapter instance
+ */
+static u32 bnx2i_alloc_iscsi_cid(struct bnx2i_hba *hba)
+{
+	int idx;
+
+	if (!hba->cid_que.cid_free_cnt)
+		return -1;
+
+	idx = hba->cid_que.cid_q_cons_idx;
+	hba->cid_que.cid_q_cons_idx++;
+	if (hba->cid_que.cid_q_cons_idx == hba->cid_que.cid_q_max_idx)
+		hba->cid_que.cid_q_cons_idx = 0;
+
+	hba->cid_que.cid_free_cnt--;
+	return hba->cid_que.cid_que[idx];
+}
+
+
+/**
+ * bnx2i_free_iscsi_cid - returns tcp port to free list
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to free
+ */
+static void bnx2i_free_iscsi_cid(struct bnx2i_hba *hba, u16 iscsi_cid)
+{
+	int idx;
+
+	if (iscsi_cid == (u16) -1)
+		return;
+
+	hba->cid_que.cid_free_cnt++;
+
+	idx = hba->cid_que.cid_q_prod_idx;
+	hba->cid_que.cid_que[idx] = iscsi_cid;
+	hba->cid_que.conn_cid_tbl[iscsi_cid] = NULL;
+	hba->cid_que.cid_q_prod_idx++;
+	if (hba->cid_que.cid_q_prod_idx == hba->cid_que.cid_q_max_idx)
+		hba->cid_que.cid_q_prod_idx = 0;
+}
+
+
+/**
+ * bnx2i_setup_free_cid_que - sets up free iscsi cid queue
+ * @hba:	pointer to adapter instance
+ *
+ * allocates memory for iscsi cid queue & 'cid - conn ptr' mapping table,
+ * 	and initialize table attributes
+ */
+static int bnx2i_setup_free_cid_que(struct bnx2i_hba *hba)
+{
+	int mem_size;
+	int i;
+
+	mem_size = hba->max_active_conns * sizeof(u32);
+	mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+	hba->cid_que.cid_que_base = kmalloc(mem_size, GFP_KERNEL);
+	if (!hba->cid_que.cid_que_base)
+		return -ENOMEM;
+
+	mem_size = hba->max_active_conns * sizeof(struct bnx2i_conn *);
+	mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+	hba->cid_que.conn_cid_tbl = kmalloc(mem_size, GFP_KERNEL);
+	if (!hba->cid_que.conn_cid_tbl) {
+		kfree(hba->cid_que.cid_que_base);
+		hba->cid_que.cid_que_base = NULL;
+		return -ENOMEM;
+	}
+
+	hba->cid_que.cid_que = (u32 *)hba->cid_que.cid_que_base;
+	hba->cid_que.cid_q_prod_idx = 0;
+	hba->cid_que.cid_q_cons_idx = 0;
+	hba->cid_que.cid_q_max_idx = hba->max_active_conns;
+	hba->cid_que.cid_free_cnt = hba->max_active_conns;
+
+	for (i = 0; i < hba->max_active_conns; i++) {
+		hba->cid_que.cid_que[i] = i;
+		hba->cid_que.conn_cid_tbl[i] = NULL;
+	}
+	return 0;
+}
+
+
+/**
+ * bnx2i_release_free_cid_que - releases 'iscsi_cid' queue resources
+ * @hba:	pointer to adapter instance
+ */
+static void bnx2i_release_free_cid_que(struct bnx2i_hba *hba)
+{
+	kfree(hba->cid_que.cid_que_base);
+	hba->cid_que.cid_que_base = NULL;
+
+	kfree(hba->cid_que.conn_cid_tbl);
+	hba->cid_que.conn_cid_tbl = NULL;
+}
+
+
+/**
+ * bnx2i_alloc_ep - allocates ep structure from global pool
+ * @hba:	pointer to adapter instance
+ *
+ * routine allocates a free endpoint structure from global pool and
+ *	a tcp port to be used for this connection.  Global resource lock,
+ *	'bnx2i_resc_lock' is held while accessing shared global data structures
+ */
+static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba)
+{
+	struct iscsi_endpoint *ep;
+	struct bnx2i_endpoint *bnx2i_ep;
+
+	ep = iscsi_create_endpoint(sizeof(*bnx2i_ep));
+	if (!ep) {
+		printk(KERN_ERR "bnx2i: Could not allocate ep\n");
+		return NULL;
+	}
+
+	bnx2i_ep = ep->dd_data;
+	INIT_LIST_HEAD(&bnx2i_ep->link);
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->hba = hba;
+	bnx2i_ep->hba_age = hba->age;
+	hba->ofld_conns_active++;
+	init_waitqueue_head(&bnx2i_ep->ofld_wait);
+	return ep;
+}
+
+
+/**
+ * bnx2i_free_ep - free endpoint
+ * @ep:		pointer to iscsi endpoint structure
+ */
+static void bnx2i_free_ep(struct iscsi_endpoint *ep)
+{
+	struct bnx2i_endpoint *bnx2i_ep = ep->dd_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bnx2i_resc_lock, flags);
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->hba->ofld_conns_active--;
+
+	bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+	if (bnx2i_ep->conn) {
+		bnx2i_ep->conn->ep = NULL;
+		bnx2i_ep->conn = NULL;
+	}
+
+	bnx2i_ep->hba = NULL;
+	spin_unlock_irqrestore(&bnx2i_resc_lock, flags);
+	iscsi_destroy_endpoint(ep);
+}
+
+
+/**
+ * bnx2i_alloc_bdt - allocates buffer descriptor (BD) table for the command
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ * @cmd:	iscsi command structure
+ */
+static int bnx2i_alloc_bdt(struct bnx2i_hba *hba, struct iscsi_session *session,
+			   struct bnx2i_cmd *cmd)
+{
+	struct io_bdt *io = &cmd->io_tbl;
+	struct iscsi_bd *bd;
+
+	io->bd_tbl = dma_alloc_coherent(&hba->pcidev->dev,
+					ISCSI_MAX_BDS_PER_CMD * sizeof(*bd),
+					&io->bd_tbl_dma, GFP_KERNEL);
+	if (!io->bd_tbl) {
+		iscsi_session_printk(KERN_ERR, session, "Could not "
+				     "allocate bdt.\n");
+		return -ENOMEM;
+	}
+	io->bd_valid = 0;
+	return 0;
+}
+
+/**
+ * bnx2i_destroy_cmd_pool - destroys iscsi command pool and release BD table
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ * @cmd:	iscsi command structure
+ */
+static void bnx2i_destroy_cmd_pool(struct bnx2i_hba *hba,
+				   struct iscsi_session *session)
+{
+	int i;
+
+	for (i = 0; i < session->cmds_max; i++) {
+		struct iscsi_task *task = session->cmds[i];
+		struct bnx2i_cmd *cmd = task->dd_data;
+
+		if (cmd->io_tbl.bd_tbl)
+			dma_free_coherent(&hba->pcidev->dev,
+					  ISCSI_MAX_BDS_PER_CMD *
+					  sizeof(struct iscsi_bd),
+					  cmd->io_tbl.bd_tbl,
+					  cmd->io_tbl.bd_tbl_dma);
+	}
+
+}
+
+
+/**
+ * bnx2i_setup_cmd_pool - sets up iscsi command pool for the session
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ */
+static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba,
+				struct iscsi_session *session)
+{
+	int i;
+
+	for (i = 0; i < session->cmds_max; i++) {
+		struct iscsi_task *task = session->cmds[i];
+		struct bnx2i_cmd *cmd = task->dd_data;
+
+		/* Anil */
+		task->hdr = &cmd->hdr;
+		task->hdr_max = sizeof(struct iscsi_hdr);
+
+		if (bnx2i_alloc_bdt(hba, session, cmd))
+			goto free_bdts;
+	}
+
+	return 0;
+
+free_bdts:
+	bnx2i_destroy_cmd_pool(hba, session);
+	return -ENOMEM;
+}
+
+
+/**
+ * bnx2i_setup_mp_bdt - allocate BD table resources
+ * @hba:	pointer to adapter structure
+ *
+ * Allocate memory for dummy buffer and associated BD
+ * table to be used by middle path (MP) requests
+ */
+static int bnx2i_setup_mp_bdt(struct bnx2i_hba *hba)
+{
+	int rc = 0;
+	struct iscsi_bd *mp_bdt;
+	u64 addr;
+
+	hba->mp_bd_tbl = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+					    &hba->mp_bd_dma, GFP_KERNEL);
+	if (!hba->mp_bd_tbl) {
+		printk(KERN_ERR "unable to allocate Middle Path BDT\n");
+		rc = -1;
+		goto out;
+	}
+
+	hba->dummy_buffer = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+					       &hba->dummy_buf_dma, GFP_KERNEL);
+	if (!hba->dummy_buffer) {
+		printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n");
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->mp_bd_tbl, hba->mp_bd_dma);
+		hba->mp_bd_tbl = NULL;
+		rc = -1;
+		goto out;
+	}
+
+	mp_bdt = (struct iscsi_bd *) hba->mp_bd_tbl;
+	addr = (unsigned long) hba->dummy_buf_dma;
+	mp_bdt->buffer_addr_lo = addr & 0xffffffff;
+	mp_bdt->buffer_addr_hi = addr >> 32;
+	mp_bdt->buffer_length = PAGE_SIZE;
+	mp_bdt->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+out:
+	return rc;
+}
+
+
+/**
+ * bnx2i_free_mp_bdt - releases ITT back to free pool
+ * @hba:	pointer to adapter instance
+ *
+ * free MP dummy buffer and associated BD table
+ */
+static void bnx2i_free_mp_bdt(struct bnx2i_hba *hba)
+{
+	if (hba->mp_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->mp_bd_tbl, hba->mp_bd_dma);
+		hba->mp_bd_tbl = NULL;
+	}
+	if (hba->dummy_buffer) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  hba->dummy_buffer, hba->dummy_buf_dma);
+		hba->dummy_buffer = NULL;
+	}
+		return;
+}
+
+/**
+ * bnx2i_drop_session - notifies iscsid of connection error.
+ * @hba:	adapter instance pointer
+ * @session:	iscsi session pointer
+ *
+ * This notifies iscsid that there is a error, so it can initiate
+ * recovery.
+ *
+ * This relies on caller using the iscsi class iterator so the object
+ * is refcounted and does not disapper from under us.
+ */
+void bnx2i_drop_session(struct iscsi_cls_session *cls_session)
+{
+	iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+/**
+ * bnx2i_ep_destroy_list_add - add an entry to EP destroy list
+ * @hba:	pointer to adapter instance
+ * @ep:		pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_add(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_add_tail(&ep->link, &hba->ep_destroy_list);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+/**
+ * bnx2i_ep_destroy_list_del - add an entry to EP destroy list
+ *
+ * @hba: 		pointer to adapter instance
+ * @ep: 		pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_del(struct bnx2i_hba *hba,
+				     struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_del_init(&ep->link);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+
+	return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_add - add an entry to ep offload pending list
+ * @hba:	pointer to adapter instance
+ * @ep:		pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_add(struct bnx2i_hba *hba,
+				  struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_add_tail(&ep->link, &hba->ep_ofld_list);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_del - add an entry to ep offload pending list
+ * @hba: 		pointer to adapter instance
+ * @ep: 		pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_del(struct bnx2i_hba *hba,
+				  struct bnx2i_endpoint *ep)
+{
+	write_lock_bh(&hba->ep_rdwr_lock);
+	list_del_init(&ep->link);
+	write_unlock_bh(&hba->ep_rdwr_lock);
+	return 0;
+}
+
+
+/**
+ * bnx2i_find_ep_in_ofld_list - find iscsi_cid in pending list of endpoints
+ *
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+	struct list_head *list;
+	struct list_head *tmp;
+	struct bnx2i_endpoint *ep;
+
+	read_lock_bh(&hba->ep_rdwr_lock);
+	list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
+		ep = (struct bnx2i_endpoint *)list;
+
+		if (ep->ep_iscsi_cid == iscsi_cid)
+			break;
+		ep = NULL;
+	}
+	read_unlock_bh(&hba->ep_rdwr_lock);
+
+	if (!ep)
+		printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+	return ep;
+}
+
+
+/**
+ * bnx2i_find_ep_in_destroy_list - find iscsi_cid in destroy list
+ * @hba: 		pointer to adapter instance
+ * @iscsi_cid:		iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+	struct list_head *list;
+	struct list_head *tmp;
+	struct bnx2i_endpoint *ep;
+
+	read_lock_bh(&hba->ep_rdwr_lock);
+	list_for_each_safe(list, tmp, &hba->ep_destroy_list) {
+		ep = (struct bnx2i_endpoint *)list;
+
+		if (ep->ep_iscsi_cid == iscsi_cid)
+			break;
+		ep = NULL;
+	}
+	read_unlock_bh(&hba->ep_rdwr_lock);
+
+	if (!ep)
+		printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+
+	return ep;
+}
+
+/**
+ * bnx2i_setup_host_queue_size - assigns shost->can_queue param
+ * @hba:	pointer to adapter instance
+ * @shost:	scsi host pointer
+ *
+ * Initializes 'can_queue' parameter based on how many outstanding commands
+ * 	the device can handle. Each device 5708/5709/57710 has different
+ *	capabilities
+ */
+static void bnx2i_setup_host_queue_size(struct bnx2i_hba *hba,
+					struct Scsi_Host *shost)
+{
+	if (test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+	else if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5709;
+	else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_57710;
+	else
+		shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+}
+
+
+/**
+ * bnx2i_alloc_hba - allocate and init adapter instance
+ * @cnic:	cnic device pointer
+ *
+ * allocate & initialize adapter structure and call other
+ *	support routines to do per adapter initialization
+ */
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
+{
+	struct Scsi_Host *shost;
+	struct bnx2i_hba *hba;
+
+	shost = iscsi_host_alloc(&bnx2i_host_template, sizeof(*hba), 0);
+	if (!shost)
+		return NULL;
+	shost->dma_boundary = cnic->pcidev->dma_mask;
+	shost->transportt = bnx2i_scsi_xport_template;
+	shost->max_id = ISCSI_MAX_CONNS_PER_HBA;
+	shost->max_channel = 0;
+	shost->max_lun = 512;
+	shost->max_cmd_len = 16;
+
+	hba = iscsi_host_priv(shost);
+	hba->shost = shost;
+	hba->netdev = cnic->netdev;
+	/* Get PCI related information and update hba struct members */
+	hba->pcidev = cnic->pcidev;
+	pci_dev_get(hba->pcidev);
+	hba->pci_did = hba->pcidev->device;
+	hba->pci_vid = hba->pcidev->vendor;
+	hba->pci_sdid = hba->pcidev->subsystem_device;
+	hba->pci_svid = hba->pcidev->subsystem_vendor;
+	hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
+	hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
+	bnx2i_identify_device(hba);
+
+	bnx2i_identify_device(hba);
+	bnx2i_setup_host_queue_size(hba, shost);
+
+	if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+		hba->regview = ioremap_nocache(hba->netdev->base_addr,
+					       BNX2_MQ_CONFIG2);
+		if (!hba->regview)
+			goto ioreg_map_err;
+	} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+		if (!hba->regview)
+			goto ioreg_map_err;
+	}
+
+	if (bnx2i_setup_mp_bdt(hba))
+		goto mp_bdt_mem_err;
+
+	INIT_LIST_HEAD(&hba->ep_ofld_list);
+	INIT_LIST_HEAD(&hba->ep_destroy_list);
+	rwlock_init(&hba->ep_rdwr_lock);
+
+	hba->mtu_supported = BNX2I_MAX_MTU_SUPPORTED;
+
+	/* different values for 5708/5709/57710 */
+	hba->max_active_conns = ISCSI_MAX_CONNS_PER_HBA;
+
+	if (bnx2i_setup_free_cid_que(hba))
+		goto cid_que_err;
+
+	/* SQ/RQ/CQ size can be changed via sysfx interface */
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		if (sq_size && sq_size <= BNX2I_5770X_SQ_WQES_MAX)
+			hba->max_sqes = sq_size;
+		else
+			hba->max_sqes = BNX2I_5770X_SQ_WQES_DEFAULT;
+	} else {	/* 5706/5708/5709 */
+		if (sq_size && sq_size <= BNX2I_570X_SQ_WQES_MAX)
+			hba->max_sqes = sq_size;
+		else
+			hba->max_sqes = BNX2I_570X_SQ_WQES_DEFAULT;
+	}
+
+	hba->max_rqes = rq_size;
+	hba->max_cqes = hba->max_sqes + rq_size;
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+		if (hba->max_cqes > BNX2I_5770X_CQ_WQES_MAX)
+			hba->max_cqes = BNX2I_5770X_CQ_WQES_MAX;
+	} else if (hba->max_cqes > BNX2I_570X_CQ_WQES_MAX)
+		hba->max_cqes = BNX2I_570X_CQ_WQES_MAX;
+
+	hba->num_ccell = hba->max_sqes / 2;
+
+	spin_lock_init(&hba->lock);
+	mutex_init(&hba->net_dev_lock);
+
+	if (iscsi_host_add(shost, &hba->pcidev->dev))
+		goto free_dump_mem;
+	return hba;
+
+free_dump_mem:
+	bnx2i_release_free_cid_que(hba);
+cid_que_err:
+	bnx2i_free_mp_bdt(hba);
+mp_bdt_mem_err:
+	if (hba->regview) {
+		iounmap(hba->regview);
+		hba->regview = NULL;
+	}
+ioreg_map_err:
+	pci_dev_put(hba->pcidev);
+	scsi_host_put(shost);
+	return NULL;
+}
+
+/**
+ * bnx2i_free_hba- releases hba structure and resources held by the adapter
+ * @hba:	pointer to adapter instance
+ *
+ * free adapter structure and call various cleanup routines.
+ */
+void bnx2i_free_hba(struct bnx2i_hba *hba)
+{
+	struct Scsi_Host *shost = hba->shost;
+
+	iscsi_host_remove(shost);
+	INIT_LIST_HEAD(&hba->ep_ofld_list);
+	INIT_LIST_HEAD(&hba->ep_destroy_list);
+	pci_dev_put(hba->pcidev);
+
+	if (hba->regview) {
+		iounmap(hba->regview);
+		hba->regview = NULL;
+	}
+	bnx2i_free_mp_bdt(hba);
+	bnx2i_release_free_cid_que(hba);
+	iscsi_host_free(shost);
+}
+
+/**
+ * bnx2i_conn_free_login_resources - free DMA resources used for login process
+ * @hba:		pointer to adapter instance
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Login related resources, mostly BDT & payload DMA memory is freed
+ */
+static void bnx2i_conn_free_login_resources(struct bnx2i_hba *hba,
+					    struct bnx2i_conn *bnx2i_conn)
+{
+	if (bnx2i_conn->gen_pdu.resp_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  bnx2i_conn->gen_pdu.resp_bd_tbl,
+				  bnx2i_conn->gen_pdu.resp_bd_dma);
+		bnx2i_conn->gen_pdu.resp_bd_tbl = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.req_bd_tbl) {
+		dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				  bnx2i_conn->gen_pdu.req_bd_tbl,
+				  bnx2i_conn->gen_pdu.req_bd_dma);
+		bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.resp_buf) {
+		dma_free_coherent(&hba->pcidev->dev,
+				  ISCSI_DEF_MAX_RECV_SEG_LEN,
+				  bnx2i_conn->gen_pdu.resp_buf,
+				  bnx2i_conn->gen_pdu.resp_dma_addr);
+		bnx2i_conn->gen_pdu.resp_buf = NULL;
+	}
+
+	if (bnx2i_conn->gen_pdu.req_buf) {
+		dma_free_coherent(&hba->pcidev->dev,
+				  ISCSI_DEF_MAX_RECV_SEG_LEN,
+				  bnx2i_conn->gen_pdu.req_buf,
+				  bnx2i_conn->gen_pdu.req_dma_addr);
+		bnx2i_conn->gen_pdu.req_buf = NULL;
+	}
+}
+
+/**
+ * bnx2i_conn_alloc_login_resources - alloc DMA resources for login/nop.
+ * @hba:		pointer to adapter instance
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Mgmt task DNA resources are allocated in this routine.
+ */
+static int bnx2i_conn_alloc_login_resources(struct bnx2i_hba *hba,
+					    struct bnx2i_conn *bnx2i_conn)
+{
+	/* Allocate memory for login request/response buffers */
+	bnx2i_conn->gen_pdu.req_buf =
+		dma_alloc_coherent(&hba->pcidev->dev,
+				   ISCSI_DEF_MAX_RECV_SEG_LEN,
+				   &bnx2i_conn->gen_pdu.req_dma_addr,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.req_buf == NULL)
+		goto login_req_buf_failure;
+
+	bnx2i_conn->gen_pdu.req_buf_size = 0;
+	bnx2i_conn->gen_pdu.req_wr_ptr = bnx2i_conn->gen_pdu.req_buf;
+
+	bnx2i_conn->gen_pdu.resp_buf =
+		dma_alloc_coherent(&hba->pcidev->dev,
+				   ISCSI_DEF_MAX_RECV_SEG_LEN,
+				   &bnx2i_conn->gen_pdu.resp_dma_addr,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.resp_buf == NULL)
+		goto login_resp_buf_failure;
+
+	bnx2i_conn->gen_pdu.resp_buf_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
+	bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf;
+
+	bnx2i_conn->gen_pdu.req_bd_tbl =
+		dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				   &bnx2i_conn->gen_pdu.req_bd_dma, GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.req_bd_tbl == NULL)
+		goto login_req_bd_tbl_failure;
+
+	bnx2i_conn->gen_pdu.resp_bd_tbl =
+		dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+				   &bnx2i_conn->gen_pdu.resp_bd_dma,
+				   GFP_KERNEL);
+	if (bnx2i_conn->gen_pdu.resp_bd_tbl == NULL)
+		goto login_resp_bd_tbl_failure;
+
+	return 0;
+
+login_resp_bd_tbl_failure:
+	dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+			  bnx2i_conn->gen_pdu.req_bd_tbl,
+			  bnx2i_conn->gen_pdu.req_bd_dma);
+	bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+
+login_req_bd_tbl_failure:
+	dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+			  bnx2i_conn->gen_pdu.resp_buf,
+			  bnx2i_conn->gen_pdu.resp_dma_addr);
+	bnx2i_conn->gen_pdu.resp_buf = NULL;
+login_resp_buf_failure:
+	dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+			  bnx2i_conn->gen_pdu.req_buf,
+			  bnx2i_conn->gen_pdu.req_dma_addr);
+	bnx2i_conn->gen_pdu.req_buf = NULL;
+login_req_buf_failure:
+	iscsi_conn_printk(KERN_ERR, bnx2i_conn->cls_conn->dd_data,
+			  "login resource alloc failed!!\n");
+	return -ENOMEM;
+
+}
+
+
+/**
+ * bnx2i_iscsi_prep_generic_pdu_bd - prepares BD table.
+ * @bnx2i_conn:		iscsi connection pointer
+ *
+ * Allocates buffers and BD tables before shipping requests to cnic
+ *	for PDUs prepared by 'iscsid' daemon
+ */
+static void bnx2i_iscsi_prep_generic_pdu_bd(struct bnx2i_conn *bnx2i_conn)
+{
+	struct iscsi_bd *bd_tbl;
+
+	bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.req_bd_tbl;
+
+	bd_tbl->buffer_addr_hi =
+		(u32) ((u64) bnx2i_conn->gen_pdu.req_dma_addr >> 32);
+	bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.req_dma_addr;
+	bd_tbl->buffer_length = bnx2i_conn->gen_pdu.req_wr_ptr -
+				bnx2i_conn->gen_pdu.req_buf;
+	bd_tbl->reserved0 = 0;
+	bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+	bd_tbl = (struct iscsi_bd  *) bnx2i_conn->gen_pdu.resp_bd_tbl;
+	bd_tbl->buffer_addr_hi = (u64) bnx2i_conn->gen_pdu.resp_dma_addr >> 32;
+	bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_dma_addr;
+	bd_tbl->buffer_length = ISCSI_DEF_MAX_RECV_SEG_LEN;
+	bd_tbl->reserved0 = 0;
+	bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+			ISCSI_BD_FIRST_IN_BD_CHAIN;
+}
+
+
+/**
+ * bnx2i_iscsi_send_generic_request - called to send mgmt tasks.
+ * @task:	transport layer task pointer
+ *
+ * called to transmit PDUs prepared by the 'iscsid' daemon. iSCSI login,
+ *	Nop-out and Logout requests flow through this path.
+ */
+static int bnx2i_iscsi_send_generic_request(struct iscsi_task *task)
+{
+	struct bnx2i_cmd *cmd = task->dd_data;
+	struct bnx2i_conn *bnx2i_conn = cmd->conn;
+	int rc = 0;
+	char *buf;
+	int data_len;
+
+	bnx2i_iscsi_prep_generic_pdu_bd(bnx2i_conn);
+	switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+	case ISCSI_OP_LOGIN:
+		bnx2i_send_iscsi_login(bnx2i_conn, task);
+		break;
+	case ISCSI_OP_NOOP_OUT:
+		data_len = bnx2i_conn->gen_pdu.req_buf_size;
+		buf = bnx2i_conn->gen_pdu.req_buf;
+		if (data_len)
+			rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+						     RESERVED_ITT,
+						     buf, data_len, 1);
+		else
+			rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+						     RESERVED_ITT,
+						     NULL, 0, 1);
+		break;
+	case ISCSI_OP_LOGOUT:
+		rc = bnx2i_send_iscsi_logout(bnx2i_conn, task);
+		break;
+	case ISCSI_OP_SCSI_TMFUNC:
+		rc = bnx2i_send_iscsi_tmf(bnx2i_conn, task);
+		break;
+	default:
+		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+				  "send_gen: unsupported op 0x%x\n",
+				  task->hdr->opcode);
+	}
+	return rc;
+}
+
+
+/**********************************************************************
+ *		SCSI-ML Interface
+ **********************************************************************/
+
+/**
+ * bnx2i_cpy_scsi_cdb - copies LUN & CDB fields in required format to sq wqe
+ * @sc:		SCSI-ML command pointer
+ * @cmd:	iscsi cmd pointer
+ */
+static void bnx2i_cpy_scsi_cdb(struct scsi_cmnd *sc, struct bnx2i_cmd *cmd)
+{
+	u32 dword;
+	int lpcnt;
+	u8 *srcp;
+	u32 *dstp;
+	u32 scsi_lun[2];
+
+	int_to_scsilun(sc->device->lun, (struct scsi_lun *) scsi_lun);
+	cmd->req.lun[0] = be32_to_cpu(scsi_lun[0]);
+	cmd->req.lun[1] = be32_to_cpu(scsi_lun[1]);
+
+	lpcnt = cmd->scsi_cmd->cmd_len / sizeof(dword);
+	srcp = (u8 *) sc->cmnd;
+	dstp = (u32 *) cmd->req.cdb;
+	while (lpcnt--) {
+		memcpy(&dword, (const void *) srcp, 4);
+		*dstp = cpu_to_be32(dword);
+		srcp += 4;
+		dstp++;
+	}
+	if (sc->cmd_len & 0x3) {
+		dword = (u32) srcp[0] | ((u32) srcp[1] << 8);
+		*dstp = cpu_to_be32(dword);
+	}
+}
+
+static void bnx2i_cleanup_task(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_hba *hba = bnx2i_conn->hba;
+
+	/*
+	 * mgmt task or cmd was never sent to us to transmit.
+	 */
+	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+		return;
+	/*
+	 * need to clean-up task context to claim dma buffers
+	 */
+	if (task->state == ISCSI_TASK_ABRT_TMF) {
+		bnx2i_send_cmd_cleanup_req(hba, task->dd_data);
+
+		spin_unlock_bh(&conn->session->lock);
+		wait_for_completion_timeout(&bnx2i_conn->cmd_cleanup_cmpl,
+				msecs_to_jiffies(ISCSI_CMD_CLEANUP_TIMEOUT));
+		spin_lock_bh(&conn->session->lock);
+	}
+	bnx2i_iscsi_unmap_sg_list(task->dd_data);
+}
+
+/**
+ * bnx2i_mtask_xmit - transmit mtask to chip for further processing
+ * @conn:	transport layer conn structure pointer
+ * @task:	transport layer command structure pointer
+ */
+static int
+bnx2i_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task)
+{
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct bnx2i_cmd *cmd = task->dd_data;
+
+	memset(bnx2i_conn->gen_pdu.req_buf, 0, ISCSI_DEF_MAX_RECV_SEG_LEN);
+
+	bnx2i_setup_cmd_wqe_template(cmd);
+	bnx2i_conn->gen_pdu.req_buf_size = task->data_count;
+	if (task->data_count) {
+		memcpy(bnx2i_conn->gen_pdu.req_buf, task->data,
+		       task->data_count);
+		bnx2i_conn->gen_pdu.req_wr_ptr =
+			bnx2i_conn->gen_pdu.req_buf + task->data_count;
+	}
+	cmd->conn = conn->dd_data;
+	cmd->scsi_cmd = NULL;
+	return bnx2i_iscsi_send_generic_request(task);
+}
+
+/**
+ * bnx2i_task_xmit - transmit iscsi command to chip for further processing
+ * @task:	transport layer command structure pointer
+ *
+ * maps SG buffers and send request to chip/firmware in the form of SQ WQE
+ */
+static int bnx2i_task_xmit(struct iscsi_task *task)
+{
+	struct iscsi_conn *conn = task->conn;
+	struct iscsi_session *session = conn->session;
+	struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct scsi_cmnd *sc = task->sc;
+	struct bnx2i_cmd *cmd = task->dd_data;
+	struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr;
+
+	if (test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+		return -ENOTCONN;
+
+	if (!bnx2i_conn->is_bound)
+		return -ENOTCONN;
+
+	/*
+	 * If there is no scsi_cmnd this must be a mgmt task
+	 */
+	if (!sc)
+		return bnx2i_mtask_xmit(conn, task);
+
+	bnx2i_setup_cmd_wqe_template(cmd);
+	cmd->req.op_code = ISCSI_OP_SCSI_CMD;
+	cmd->conn = bnx2i_conn;
+	cmd->scsi_cmd = sc;
+	cmd->req.total_data_transfer_length = scsi_bufflen(sc);
+	cmd->req.cmd_sn = be32_to_cpu(hdr->cmdsn);
+
+	bnx2i_iscsi_map_sg_list(cmd);
+	bnx2i_cpy_scsi_cdb(sc, cmd);
+
+	cmd->req.op_attr = ISCSI_ATTR_SIMPLE;
+	if (sc->sc_data_direction == DMA_TO_DEVICE) {
+		cmd->req.op_attr |= ISCSI_CMD_REQUEST_WRITE;
+		cmd->req.itt = task->itt |
+			(ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+		bnx2i_setup_write_cmd_bd_info(task);
+	} else {
+		if (scsi_bufflen(sc))
+			cmd->req.op_attr |= ISCSI_CMD_REQUEST_READ;
+		cmd->req.itt = task->itt |
+			(ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+	}
+
+	cmd->req.num_bds = cmd->io_tbl.bd_valid;
+	if (!cmd->io_tbl.bd_valid) {
+		cmd->req.bd_list_addr_lo = (u32) hba->mp_bd_dma;
+		cmd->req.bd_list_addr_hi = (u32) ((u64) hba->mp_bd_dma >> 32);
+		cmd->req.num_bds = 1;
+	}
+
+	bnx2i_send_iscsi_scsicmd(bnx2i_conn, cmd);
+	return 0;
+}
+
+/**
+ * bnx2i_session_create - create a new iscsi session
+ * @cmds_max:		max commands supported
+ * @qdepth:		scsi queue depth to support
+ * @initial_cmdsn:	initial iscsi CMDSN to be used for this session
+ *
+ * Creates a new iSCSI session instance on given device.
+ */
+static struct iscsi_cls_session *
+bnx2i_session_create(struct iscsi_endpoint *ep,
+		     uint16_t cmds_max, uint16_t qdepth,
+		     uint32_t initial_cmdsn)
+{
+	struct Scsi_Host *shost;
+	struct iscsi_cls_session *cls_session;
+	struct bnx2i_hba *hba;
+	struct bnx2i_endpoint *bnx2i_ep;
+
+	if (!ep) {
+		printk(KERN_ERR "bnx2i: missing ep.\n");
+		return NULL;
+	}
+
+	bnx2i_ep = ep->dd_data;
+	shost = bnx2i_ep->hba->shost;
+	hba = iscsi_host_priv(shost);
+	if (bnx2i_adapter_ready(hba))
+		return NULL;
+
+	/*
+	 * user can override hw limit as long as it is within
+	 * the min/max.
+	 */
+	if (cmds_max > hba->max_sqes)
+		cmds_max = hba->max_sqes;
+	else if (cmds_max < BNX2I_SQ_WQES_MIN)
+		cmds_max = BNX2I_SQ_WQES_MIN;
+
+	cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
+					  cmds_max, sizeof(struct bnx2i_cmd),
+					  initial_cmdsn, ISCSI_MAX_TARGET);
+	if (!cls_session)
+		return NULL;
+
+	if (bnx2i_setup_cmd_pool(hba, cls_session->dd_data))
+		goto session_teardown;
+	return cls_session;
+
+session_teardown:
+	iscsi_session_teardown(cls_session);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_session_destroy - destroys iscsi session
+ * @cls_session:	pointer to iscsi cls session
+ *
+ * Destroys previously created iSCSI session instance and releases
+ *	all resources held by it
+ */
+static void bnx2i_session_destroy(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *session = cls_session->dd_data;
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+
+	bnx2i_destroy_cmd_pool(hba, session);
+	iscsi_session_teardown(cls_session);
+}
+
+
+/**
+ * bnx2i_conn_create - create iscsi connection instance
+ * @cls_session:	pointer to iscsi cls session
+ * @cid:		iscsi cid as per rfc (not NX2's CID terminology)
+ *
+ * Creates a new iSCSI connection instance for a given session
+ */
+static struct iscsi_cls_conn *
+bnx2i_conn_create(struct iscsi_cls_session *cls_session, uint32_t cid)
+{
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_conn *bnx2i_conn;
+	struct iscsi_cls_conn *cls_conn;
+	struct iscsi_conn *conn;
+
+	cls_conn = iscsi_conn_setup(cls_session, sizeof(*bnx2i_conn),
+				    cid);
+	if (!cls_conn)
+		return NULL;
+	conn = cls_conn->dd_data;
+
+	bnx2i_conn = conn->dd_data;
+	bnx2i_conn->cls_conn = cls_conn;
+	bnx2i_conn->hba = hba;
+	/* 'ep' ptr will be assigned in bind() call */
+	bnx2i_conn->ep = NULL;
+	init_completion(&bnx2i_conn->cmd_cleanup_cmpl);
+
+	if (bnx2i_conn_alloc_login_resources(hba, bnx2i_conn)) {
+		iscsi_conn_printk(KERN_ALERT, conn,
+				  "conn_new: login resc alloc failed!!\n");
+		goto free_conn;
+	}
+
+	return cls_conn;
+
+free_conn:
+	iscsi_conn_teardown(cls_conn);
+	return NULL;
+}
+
+/**
+ * bnx2i_conn_bind - binds iscsi sess, conn and ep objects together
+ * @cls_session:	pointer to iscsi cls session
+ * @cls_conn:		pointer to iscsi cls conn
+ * @transport_fd:	64-bit EP handle
+ * @is_leading:		leading connection on this session?
+ *
+ * Binds together iSCSI session instance, iSCSI connection instance
+ *	and the TCP connection. This routine returns error code if
+ *	TCP connection does not belong on the device iSCSI sess/conn
+ *	is bound
+ */
+static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
+			   struct iscsi_cls_conn *cls_conn,
+			   uint64_t transport_fd, int is_leading)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct iscsi_endpoint *ep;
+	int ret_code;
+
+	ep = iscsi_lookup_endpoint(transport_fd);
+	if (!ep)
+		return -EINVAL;
+
+	bnx2i_ep = ep->dd_data;
+	if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
+	    (bnx2i_ep->state == EP_STATE_TCP_RST_RCVD))
+		/* Peer disconnect via' FIN or RST */
+		return -EINVAL;
+
+	if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+		return -EINVAL;
+
+	if (bnx2i_ep->hba != hba) {
+		/* Error - TCP connection does not belong to this device
+		 */
+		iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+				  "conn bind, ep=0x%p (%s) does not",
+				  bnx2i_ep, bnx2i_ep->hba->netdev->name);
+		iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+				  "belong to hba (%s)\n",
+				  hba->netdev->name);
+		return -EEXIST;
+	}
+
+	bnx2i_ep->conn = bnx2i_conn;
+	bnx2i_conn->ep = bnx2i_ep;
+	bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
+	bnx2i_conn->fw_cid = bnx2i_ep->ep_cid;
+	bnx2i_conn->is_bound = 1;
+
+	ret_code = bnx2i_bind_conn_to_iscsi_cid(hba, bnx2i_conn,
+						bnx2i_ep->ep_iscsi_cid);
+
+	/* 5706/5708/5709 FW takes RQ as full when initiated, but for 57710
+	 * driver needs to explicitly replenish RQ index during setup.
+	 */
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+		bnx2i_put_rq_buf(bnx2i_conn, 0);
+
+	bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+	return ret_code;
+}
+
+
+/**
+ * bnx2i_conn_destroy - destroy iscsi connection instance & release resources
+ * @cls_conn:	pointer to iscsi cls conn
+ *
+ * Destroy an iSCSI connection instance and release memory resources held by
+ *	this connection
+ */
+static void bnx2i_conn_destroy(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	struct Scsi_Host *shost;
+	struct bnx2i_hba *hba;
+
+	shost = iscsi_session_to_shost(iscsi_conn_to_session(cls_conn));
+	hba = iscsi_host_priv(shost);
+
+	bnx2i_conn_free_login_resources(hba, bnx2i_conn);
+	iscsi_conn_teardown(cls_conn);
+}
+
+
+/**
+ * bnx2i_conn_get_param - return iscsi connection parameter to caller
+ * @cls_conn:	pointer to iscsi cls conn
+ * @param:	parameter type identifier
+ * @buf: 	buffer pointer
+ *
+ * returns iSCSI connection parameters
+ */
+static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
+				enum iscsi_param param, char *buf)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_PORT:
+		if (bnx2i_conn->ep)
+			len = sprintf(buf, "%hu\n",
+				      bnx2i_conn->ep->cm_sk->dst_port);
+		break;
+	case ISCSI_PARAM_CONN_ADDRESS:
+		if (bnx2i_conn->ep)
+			len = sprintf(buf, NIPQUAD_FMT "\n",
+				      NIPQUAD(bnx2i_conn->ep->cm_sk->dst_ip));
+		break;
+	default:
+		return iscsi_conn_get_param(cls_conn, param, buf);
+	}
+
+	return len;
+}
+
+/**
+ * bnx2i_host_get_param - returns host (adapter) related parameters
+ * @shost:	scsi host pointer
+ * @param:	parameter type identifier
+ * @buf:	buffer pointer
+ */
+static int bnx2i_host_get_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf)
+{
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	int len = 0;
+
+	switch (param) {
+	case ISCSI_HOST_PARAM_HWADDRESS:
+		len = sysfs_format_mac(buf, hba->cnic->mac_addr, 6);
+		break;
+	case ISCSI_HOST_PARAM_NETDEV_NAME:
+		len = sprintf(buf, "%s\n", hba->netdev->name);
+		break;
+	default:
+		return iscsi_host_get_param(shost, param, buf);
+	}
+	return len;
+}
+
+/**
+ * bnx2i_conn_start - completes iscsi connection migration to FFP
+ * @cls_conn:	pointer to iscsi cls conn
+ *
+ * last call in FFP migration to handover iscsi conn to the driver
+ */
+static int bnx2i_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+
+	bnx2i_conn->ep->state = EP_STATE_ULP_UPDATE_START;
+	bnx2i_update_iscsi_conn(conn);
+
+	/*
+	 * this should normally not sleep for a long time so it should
+	 * not disrupt the caller.
+	 */
+	bnx2i_conn->ep->ofld_timer.expires = 1 * HZ + jiffies;
+	bnx2i_conn->ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_conn->ep->ofld_timer.data = (unsigned long) bnx2i_conn->ep;
+	add_timer(&bnx2i_conn->ep->ofld_timer);
+	/* update iSCSI context for this conn, wait for CNIC to complete */
+	wait_event_interruptible(bnx2i_conn->ep->ofld_wait,
+			bnx2i_conn->ep->state != EP_STATE_ULP_UPDATE_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_conn->ep->ofld_timer);
+
+	iscsi_conn_start(cls_conn);
+	return 0;
+}
+
+
+/**
+ * bnx2i_conn_get_stats - returns iSCSI stats
+ * @cls_conn:	pointer to iscsi cls conn
+ * @stats:	pointer to iscsi statistic struct
+ */
+static void bnx2i_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+				 struct iscsi_stats *stats)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+
+	stats->txdata_octets = conn->txdata_octets;
+	stats->rxdata_octets = conn->rxdata_octets;
+	stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+	stats->dataout_pdus = conn->dataout_pdus_cnt;
+	stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+	stats->datain_pdus = conn->datain_pdus_cnt;
+	stats->r2t_pdus = conn->r2t_pdus_cnt;
+	stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+	stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+	stats->custom_length = 3;
+	strcpy(stats->custom[2].desc, "eh_abort_cnt");
+	stats->custom[2].value = conn->eh_abort_cnt;
+	stats->digest_err = 0;
+	stats->timeout_err = 0;
+	stats->custom_length = 0;
+}
+
+
+/**
+ * bnx2i_check_route - checks if target IP route belongs to one of NX2 devices
+ * @dst_addr:	target IP address
+ *
+ * check if route resolves to BNX2 device
+ */
+static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
+{
+	struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+	struct bnx2i_hba *hba;
+	struct cnic_dev *cnic = NULL;
+
+	bnx2i_reg_dev_all();
+
+	hba = get_adapter_list_head();
+	if (hba && hba->cnic)
+		cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
+	if (!cnic) {
+		printk(KERN_ALERT "bnx2i: no route,"
+		       "can't connect using cnic\n");
+		goto no_nx2_route;
+	}
+	hba = bnx2i_find_hba_for_cnic(cnic);
+	if (!hba)
+		goto no_nx2_route;
+
+	if (bnx2i_adapter_ready(hba)) {
+		printk(KERN_ALERT "bnx2i: check route, hba not found\n");
+		goto no_nx2_route;
+	}
+	if (hba->netdev->mtu > hba->mtu_supported) {
+		printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n",
+				  hba->netdev->name, hba->netdev->mtu);
+		printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n",
+				  hba->mtu_supported);
+		goto no_nx2_route;
+	}
+	return hba;
+no_nx2_route:
+	return NULL;
+}
+
+
+/**
+ * bnx2i_tear_down_conn - tear down iscsi/tcp connection and free resources
+ * @hba:	pointer to adapter instance
+ * @ep:		endpoint (transport indentifier) structure
+ *
+ * destroys cm_sock structure and on chip iscsi context
+ */
+static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
+				 struct bnx2i_endpoint *ep)
+{
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+		hba->cnic->cm_destroy(ep->cm_sk);
+
+	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+		ep->state = EP_STATE_DISCONN_COMPL;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
+	    ep->state == EP_STATE_DISCONN_TIMEDOUT) {
+		printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
+				  " NW/PCIe trace, driver msgs to developers"
+				  " for analysis\n");
+		return 1;
+	}
+
+	ep->state = EP_STATE_CLEANUP_START;
+	init_timer(&ep->ofld_timer);
+	ep->ofld_timer.expires = 10*HZ + jiffies;
+	ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	ep->ofld_timer.data = (unsigned long) ep;
+	add_timer(&ep->ofld_timer);
+
+	bnx2i_ep_destroy_list_add(hba, ep);
+
+	/* destroy iSCSI context, wait for it to complete */
+	bnx2i_send_conn_destroy(hba, ep);
+	wait_event_interruptible(ep->ofld_wait,
+				 (ep->state != EP_STATE_CLEANUP_START));
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&ep->ofld_timer);
+
+	bnx2i_ep_destroy_list_del(hba, ep);
+
+	if (ep->state != EP_STATE_CLEANUP_CMPL)
+		/* should never happen */
+		printk(KERN_ALERT "bnx2i - conn destroy failed\n");
+
+	return 0;
+}
+
+
+/**
+ * bnx2i_ep_connect - establish TCP connection to target portal
+ * @shost:		scsi host
+ * @dst_addr:		target IP address
+ * @non_blocking:	blocking or non-blocking call
+ *
+ * this routine initiates the TCP/IP connection by invoking Option-2 i/f
+ *	with l5_core and the CNIC. This is a multi-step process of resolving
+ *	route to target, create a iscsi connection context, handshaking with
+ *	CNIC module to create/initialize the socket struct and finally
+ *	sending down option-2 request to complete TCP 3-way handshake
+ */
+static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
+					       struct sockaddr *dst_addr,
+					       int non_blocking)
+{
+	u32 iscsi_cid = BNX2I_CID_RESERVED;
+	struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+	struct sockaddr_in6 *desti6;
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct bnx2i_hba *hba;
+	struct cnic_dev *cnic;
+	struct cnic_sockaddr saddr;
+	struct iscsi_endpoint *ep;
+	int rc = 0;
+
+	if (shost)
+		/* driver is given scsi host to work with */
+		hba = iscsi_host_priv(shost);
+	else
+		/*
+		 * check if the given destination can be reached through
+		 * a iscsi capable NetXtreme2 device
+		 */
+		hba = bnx2i_check_route(dst_addr);
+	if (!hba) {
+		rc = -ENOMEM;
+		goto check_busy;
+	}
+
+	cnic = hba->cnic;
+	ep = bnx2i_alloc_ep(hba);
+	if (!ep) {
+		rc = -ENOMEM;
+		goto check_busy;
+	}
+	bnx2i_ep = ep->dd_data;
+
+	mutex_lock(&hba->net_dev_lock);
+	if (bnx2i_adapter_ready(hba)) {
+		rc = -EPERM;
+		goto net_if_down;
+	}
+
+	bnx2i_ep->state = EP_STATE_IDLE;
+	bnx2i_ep->ep_iscsi_cid = (u16) -1;
+	bnx2i_ep->num_active_cmds = 0;
+	iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
+	if (iscsi_cid == -1) {
+		printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+		rc = -ENOMEM;
+		goto iscsi_cid_err;
+	}
+	bnx2i_ep->hba_age = hba->age;
+
+	rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
+	if (rc != 0) {
+		printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+		rc = -ENOMEM;
+		goto qp_resc_err;
+	}
+
+	bnx2i_ep->ep_iscsi_cid = (u16)iscsi_cid;
+	bnx2i_ep->state = EP_STATE_OFLD_START;
+	bnx2i_ep_ofld_list_add(hba, bnx2i_ep);
+
+	init_timer(&bnx2i_ep->ofld_timer);
+	bnx2i_ep->ofld_timer.expires = 2 * HZ + jiffies;
+	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+	add_timer(&bnx2i_ep->ofld_timer);
+
+	bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+
+	/* Wait for CNIC hardware to setup conn context and return 'cid' */
+	wait_event_interruptible(bnx2i_ep->ofld_wait,
+				 bnx2i_ep->state != EP_STATE_OFLD_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_ep->ofld_timer);
+
+	bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+
+	if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
+		rc = -ENOSPC;
+		goto conn_failed;
+	}
+
+	rc = cnic->cm_create(cnic, CNIC_ULP_ISCSI, bnx2i_ep->ep_cid,
+			     iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
+	if (rc) {
+		rc = -EINVAL;
+		goto conn_failed;
+	}
+
+	bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
+	bnx2i_ep->cm_sk->snd_buf = 256 * 1024;
+	clear_bit(SK_TCP_TIMESTAMP, &bnx2i_ep->cm_sk->tcp_flags);
+
+	memset(&saddr, 0, sizeof(saddr));
+	if (dst_addr->sa_family == AF_INET) {
+		desti = (struct sockaddr_in *) dst_addr;
+		saddr.remote.v4 = *desti;
+		saddr.local.v4.sin_family = desti->sin_family;
+	} else if (dst_addr->sa_family == AF_INET6) {
+		desti6 = (struct sockaddr_in6 *) dst_addr;
+		saddr.remote.v6 = *desti6;
+		saddr.local.v6.sin6_family = desti6->sin6_family;
+	}
+
+	bnx2i_ep->timestamp = jiffies;
+	bnx2i_ep->state = EP_STATE_CONNECT_START;
+	if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		rc = -EINVAL;
+		goto conn_failed;
+	} else
+		rc = cnic->cm_connect(bnx2i_ep->cm_sk, &saddr);
+
+	if (rc)
+		goto release_ep;
+
+	if (bnx2i_map_ep_dbell_regs(bnx2i_ep))
+		goto release_ep;
+	mutex_unlock(&hba->net_dev_lock);
+	return ep;
+
+release_ep:
+	if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+		mutex_unlock(&hba->net_dev_lock);
+		return ERR_PTR(rc);
+	}
+conn_failed:
+net_if_down:
+iscsi_cid_err:
+	bnx2i_free_qp_resc(hba, bnx2i_ep);
+qp_resc_err:
+	bnx2i_free_ep(ep);
+	mutex_unlock(&hba->net_dev_lock);
+check_busy:
+	bnx2i_unreg_dev_all();
+	return ERR_PTR(rc);
+}
+
+
+/**
+ * bnx2i_ep_poll - polls for TCP connection establishement
+ * @ep:			TCP connection (endpoint) handle
+ * @timeout_ms:		timeout value in milli secs
+ *
+ * polls for TCP connect request to complete
+ */
+static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	int rc = 0;
+
+	bnx2i_ep = ep->dd_data;
+	if ((bnx2i_ep->state == EP_STATE_IDLE) ||
+	    (bnx2i_ep->state == EP_STATE_CONNECT_FAILED) ||
+	    (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+		return -1;
+	if (bnx2i_ep->state == EP_STATE_CONNECT_COMPL)
+		return 1;
+
+	rc = wait_event_interruptible_timeout(bnx2i_ep->ofld_wait,
+					      ((bnx2i_ep->state ==
+						EP_STATE_OFLD_FAILED) ||
+					       (bnx2i_ep->state ==
+						EP_STATE_CONNECT_FAILED) ||
+					       (bnx2i_ep->state ==
+						EP_STATE_CONNECT_COMPL)),
+					      msecs_to_jiffies(timeout_ms));
+	if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+		rc = -1;
+
+	if (rc > 0)
+		return 1;
+	else if (!rc)
+		return 0;	/* timeout */
+	else
+		return rc;
+}
+
+
+/**
+ * bnx2i_ep_tcp_conn_active - check EP state transition
+ * @ep:		endpoint pointer
+ *
+ * check if underlying TCP connection is active
+ */
+static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
+{
+	int ret;
+	int cnic_dev_10g = 0;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+		cnic_dev_10g = 1;
+
+	switch (bnx2i_ep->state) {
+	case EP_STATE_CONNECT_START:
+	case EP_STATE_CLEANUP_FAILED:
+	case EP_STATE_OFLD_FAILED:
+	case EP_STATE_DISCONN_TIMEDOUT:
+		ret = 0;
+		break;
+	case EP_STATE_CONNECT_COMPL:
+	case EP_STATE_ULP_UPDATE_START:
+	case EP_STATE_ULP_UPDATE_COMPL:
+	case EP_STATE_TCP_FIN_RCVD:
+	case EP_STATE_ULP_UPDATE_FAILED:
+		ret = 1;
+		break;
+	case EP_STATE_TCP_RST_RCVD:
+		ret = 0;
+		break;
+	case EP_STATE_CONNECT_FAILED:
+		if (cnic_dev_10g)
+			ret = 1;
+		else
+			ret = 0;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+
+/**
+ * bnx2i_ep_disconnect - executes TCP connection teardown process
+ * @ep:		TCP connection (endpoint) handle
+ *
+ * executes  TCP connection teardown process
+ */
+static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct bnx2i_conn *bnx2i_conn = NULL;
+	struct iscsi_session *session = NULL;
+	struct iscsi_conn *conn;
+	struct cnic_dev *cnic;
+	struct bnx2i_hba *hba;
+
+	bnx2i_ep = ep->dd_data;
+
+	/* driver should not attempt connection cleanup untill TCP_CONNECT
+	 * completes either successfully or fails. Timeout is 9-secs, so
+	 * wait for it to complete
+	 */
+	while ((bnx2i_ep->state == EP_STATE_CONNECT_START) &&
+		!time_after(jiffies, bnx2i_ep->timestamp + (12 * HZ)))
+		msleep(250);
+
+	if (bnx2i_ep->conn) {
+		bnx2i_conn = bnx2i_ep->conn;
+		conn = bnx2i_conn->cls_conn->dd_data;
+		session = conn->session;
+
+		spin_lock_bh(&session->lock);
+		bnx2i_conn->is_bound = 0;
+		spin_unlock_bh(&session->lock);
+	}
+
+	hba = bnx2i_ep->hba;
+	if (bnx2i_ep->state == EP_STATE_IDLE)
+		goto return_bnx2i_ep;
+	cnic = hba->cnic;
+
+	mutex_lock(&hba->net_dev_lock);
+
+	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+		goto free_resc;
+	if (bnx2i_ep->hba_age != hba->age)
+		goto free_resc;
+
+	if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
+		goto destory_conn;
+
+	bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+	init_timer(&bnx2i_ep->ofld_timer);
+	bnx2i_ep->ofld_timer.expires = 10*HZ + jiffies;
+	bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+	add_timer(&bnx2i_ep->ofld_timer);
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		int close = 0;
+
+		if (session) {
+			spin_lock_bh(&session->lock);
+			if (session->state == ISCSI_STATE_LOGGING_OUT)
+				close = 1;
+			spin_unlock_bh(&session->lock);
+		}
+		if (close)
+			cnic->cm_close(bnx2i_ep->cm_sk);
+		else
+			cnic->cm_abort(bnx2i_ep->cm_sk);
+	} else
+		goto free_resc;
+
+	/* wait for option-2 conn teardown */
+	wait_event_interruptible(bnx2i_ep->ofld_wait,
+				 bnx2i_ep->state != EP_STATE_DISCONN_START);
+
+	if (signal_pending(current))
+		flush_signals(current);
+	del_timer_sync(&bnx2i_ep->ofld_timer);
+
+destory_conn:
+	if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+		mutex_unlock(&hba->net_dev_lock);
+		return;
+	}
+free_resc:
+	mutex_unlock(&hba->net_dev_lock);
+	bnx2i_free_qp_resc(hba, bnx2i_ep);
+return_bnx2i_ep:
+	if (bnx2i_conn)
+		bnx2i_conn->ep = NULL;
+
+	bnx2i_free_ep(ep);
+
+	if (!hba->ofld_conns_active)
+		bnx2i_unreg_dev_all();
+}
+
+
+/**
+ * bnx2i_nl_set_path - ISCSI_UEVENT_PATH_UPDATE user message handler
+ * @buf:	pointer to buffer containing iscsi path message
+ *
+ */
+static int bnx2i_nl_set_path(struct Scsi_Host *shost, struct iscsi_path *params)
+{
+	struct bnx2i_hba *hba = iscsi_host_priv(shost);
+	char *buf = (char *) params;
+	u16 len = sizeof(*params);
+
+	/* handled by cnic driver */
+	hba->cnic->iscsi_nl_msg_recv(hba->cnic, ISCSI_UEVENT_PATH_UPDATE, buf,
+				     len);
+
+	return 0;
+}
+
+
+/*
+ * 'Scsi_Host_Template' structure and 'iscsi_tranport' structure template
+ * used while registering with the scsi host and iSCSI transport module.
+ */
+static struct scsi_host_template bnx2i_host_template = {
+	.module			= THIS_MODULE,
+	.name			= "Broadcom Offload iSCSI Initiator",
+	.proc_name		= "bnx2i",
+	.queuecommand		= iscsi_queuecommand,
+	.eh_abort_handler	= iscsi_eh_abort,
+	.eh_device_reset_handler = iscsi_eh_device_reset,
+	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.can_queue		= 1024,
+	.max_sectors		= 127,
+	.cmd_per_lun		= 32,
+	.this_id		= -1,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.sg_tablesize		= ISCSI_MAX_BDS_PER_CMD,
+	.shost_attrs		= bnx2i_dev_attributes,
+};
+
+struct iscsi_transport bnx2i_iscsi_transport = {
+	.owner			= THIS_MODULE,
+	.name			= "bnx2i",
+	.caps			= CAP_RECOVERY_L0 | CAP_HDRDGST |
+				  CAP_MULTI_R2T | CAP_DATADGST |
+				  CAP_DATA_PATH_OFFLOAD,
+	.param_mask		= ISCSI_MAX_RECV_DLENGTH |
+				  ISCSI_MAX_XMIT_DLENGTH |
+				  ISCSI_HDRDGST_EN |
+				  ISCSI_DATADGST_EN |
+				  ISCSI_INITIAL_R2T_EN |
+				  ISCSI_MAX_R2T |
+				  ISCSI_IMM_DATA_EN |
+				  ISCSI_FIRST_BURST |
+				  ISCSI_MAX_BURST |
+				  ISCSI_PDU_INORDER_EN |
+				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_ERL |
+				  ISCSI_CONN_PORT |
+				  ISCSI_CONN_ADDRESS |
+				  ISCSI_EXP_STATSN |
+				  ISCSI_PERSISTENT_PORT |
+				  ISCSI_PERSISTENT_ADDRESS |
+				  ISCSI_TARGET_NAME | ISCSI_TPGT |
+				  ISCSI_USERNAME | ISCSI_PASSWORD |
+				  ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+				  ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+				  ISCSI_LU_RESET_TMO |
+				  ISCSI_PING_TMO | ISCSI_RECV_TMO |
+				  ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+	.host_param_mask	= ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME,
+	.create_session		= bnx2i_session_create,
+	.destroy_session	= bnx2i_session_destroy,
+	.create_conn		= bnx2i_conn_create,
+	.bind_conn		= bnx2i_conn_bind,
+	.destroy_conn		= bnx2i_conn_destroy,
+	.set_param		= iscsi_set_param,
+	.get_conn_param		= bnx2i_conn_get_param,
+	.get_session_param	= iscsi_session_get_param,
+	.get_host_param		= bnx2i_host_get_param,
+	.start_conn		= bnx2i_conn_start,
+	.stop_conn		= iscsi_conn_stop,
+	.send_pdu		= iscsi_conn_send_pdu,
+	.xmit_task		= bnx2i_task_xmit,
+	.get_stats		= bnx2i_conn_get_stats,
+	/* TCP connect - disconnect - option-2 interface calls */
+	.ep_connect		= bnx2i_ep_connect,
+	.ep_poll		= bnx2i_ep_poll,
+	.ep_disconnect		= bnx2i_ep_disconnect,
+	.set_path		= bnx2i_nl_set_path,
+	/* Error recovery timeout call */
+	.session_recovery_timedout = iscsi_session_recovery_timedout,
+	.cleanup_task		= bnx2i_cleanup_task,
+};
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
new file mode 100644
index 00000000000..96426b751eb
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -0,0 +1,142 @@
+/* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2004 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+/**
+ * bnx2i_dev_to_hba - maps dev pointer to adapter struct
+ * @dev:	device pointer
+ *
+ * Map device to hba structure
+ */
+static inline struct bnx2i_hba *bnx2i_dev_to_hba(struct device *dev)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	return iscsi_host_priv(shost);
+}
+
+
+/**
+ * bnx2i_show_sq_info - return(s currently configured send queue (SQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ *
+ * Returns current SQ size parameter, this paramater determines the number
+ * outstanding iSCSI commands supported on a connection
+ */
+static ssize_t bnx2i_show_sq_info(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	return sprintf(buf, "0x%x\n", hba->max_sqes);
+}
+
+
+/**
+ * bnx2i_set_sq_info - update send queue (SQ) size parameter
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ * @count:	parameter buffer size
+ *
+ * Interface for user to change shared queue size allocated for each conn
+ * Must be within SQ limits and a power of 2. For the latter this is needed
+ * because of how libiscsi preallocates tasks.
+ */
+static ssize_t bnx2i_set_sq_info(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+	u32 val;
+	int max_sq_size;
+
+	if (hba->ofld_conns_active)
+		goto skip_config;
+
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		max_sq_size = BNX2I_5770X_SQ_WQES_MAX;
+	else
+		max_sq_size = BNX2I_570X_SQ_WQES_MAX;
+
+	if (sscanf(buf, " 0x%x ", &val) > 0) {
+		if ((val >= BNX2I_SQ_WQES_MIN) && (val <= max_sq_size) &&
+		    (is_power_of_2(val)))
+			hba->max_sqes = val;
+	}
+
+	return count;
+
+skip_config:
+	printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n");
+	return 0;
+}
+
+
+/**
+ * bnx2i_show_ccell_info - returns command cell (HQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ *
+ * returns per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_show_ccell_info(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	return sprintf(buf, "0x%x\n", hba->num_ccell);
+}
+
+
+/**
+ * bnx2i_get_link_state - set command cell (HQ) size
+ * @dev:	device pointer
+ * @buf:	buffer to return current SQ size parameter
+ * @count:	parameter buffer size
+ *
+ * updates per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_set_ccell_info(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	u32 val;
+	struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+	if (hba->ofld_conns_active)
+		goto skip_config;
+
+	if (sscanf(buf, " 0x%x ", &val) > 0) {
+		if ((val >= BNX2I_CCELLS_MIN) &&
+		    (val <= BNX2I_CCELLS_MAX)) {
+			hba->num_ccell = val;
+		}
+	}
+
+	return count;
+
+skip_config:
+	printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n");
+	return 0;
+}
+
+
+static DEVICE_ATTR(sq_size, S_IRUGO | S_IWUSR,
+		   bnx2i_show_sq_info, bnx2i_set_sq_info);
+static DEVICE_ATTR(num_ccell, S_IRUGO | S_IWUSR,
+		   bnx2i_show_ccell_info, bnx2i_set_ccell_info);
+
+struct device_attribute *bnx2i_dev_attributes[] = {
+	&dev_attr_sq_size,
+	&dev_attr_num_ccell,
+	NULL
+};
diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index 59b0958d2d1..e3133b58e59 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -144,7 +144,6 @@ struct cxgb3i_adapter *cxgb3i_adapter_find_by_tdev(struct t3cdev *);
 void cxgb3i_adapter_open(struct t3cdev *);
 void cxgb3i_adapter_close(struct t3cdev *);
 
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *);
 struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *,
 				       struct net_device *);
 void cxgb3i_hba_host_remove(struct cxgb3i_hba *);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 9212400b9b1..74369a3f963 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
 
 #include <linux/inet.h>
 #include <linux/crypto.h>
+#include <net/dst.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -178,7 +179,7 @@ void cxgb3i_adapter_close(struct t3cdev *t3dev)
  * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure via net_device
  * @t3dev: t3cdev adapter
  */
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
+static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
 {
 	struct cxgb3i_adapter *snic;
 	int i;
@@ -261,20 +262,27 @@ void cxgb3i_hba_host_remove(struct cxgb3i_hba *hba)
 
 /**
  * cxgb3i_ep_connect - establish TCP connection to target portal
+ * @shost:		scsi host to use
  * @dst_addr:		target IP address
  * @non_blocking:	blocking or non-blocking call
  *
  * Initiates a TCP/IP connection to the dst_addr
  */
-static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr,
+static struct iscsi_endpoint *cxgb3i_ep_connect(struct Scsi_Host *shost,
+						struct sockaddr *dst_addr,
 						int non_blocking)
 {
 	struct iscsi_endpoint *ep;
 	struct cxgb3i_endpoint *cep;
-	struct cxgb3i_hba *hba;
+	struct cxgb3i_hba *hba = NULL;
 	struct s3_conn *c3cn = NULL;
 	int err = 0;
 
+	if (shost)
+		hba = iscsi_host_priv(shost);
+
+	cxgb3i_api_debug("shost 0x%p, hba 0x%p.\n", shost, hba);
+
 	c3cn = cxgb3i_c3cn_create();
 	if (!c3cn) {
 		cxgb3i_log_info("ep connect OOM.\n");
@@ -282,17 +290,27 @@ static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr,
 		goto release_conn;
 	}
 
-	err = cxgb3i_c3cn_connect(c3cn, (struct sockaddr_in *)dst_addr);
+	err = cxgb3i_c3cn_connect(hba ? hba->ndev : NULL, c3cn,
+				 (struct sockaddr_in *)dst_addr);
 	if (err < 0) {
 		cxgb3i_log_info("ep connect failed.\n");
 		goto release_conn;
 	}
+
 	hba = cxgb3i_hba_find_by_netdev(c3cn->dst_cache->dev);
 	if (!hba) {
 		err = -ENOSPC;
 		cxgb3i_log_info("NOT going through cxgbi device.\n");
 		goto release_conn;
 	}
+
+	if (shost && hba != iscsi_host_priv(shost)) {
+		err = -ENOSPC;
+		cxgb3i_log_info("Could not connect through request host%u\n",
+				shost->host_no);
+		goto release_conn;
+	}
+
 	if (c3cn_is_closing(c3cn)) {
 		err = -ENOSPC;
 		cxgb3i_log_info("ep connect unable to connect.\n");
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index e11c9c180f3..c1d5be4adf9 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1479,12 +1479,13 @@ static struct net_device *cxgb3_egress_dev(struct net_device *root_dev,
 	return NULL;
 }
 
-static struct rtable *find_route(__be32 saddr, __be32 daddr,
+static struct rtable *find_route(struct net_device *dev,
+				 __be32 saddr, __be32 daddr,
 				 __be16 sport, __be16 dport)
 {
 	struct rtable *rt;
 	struct flowi fl = {
-		.oif = 0,
+		.oif = dev ? dev->ifindex : 0,
 		.nl_u = {
 			 .ip4_u = {
 				   .daddr = daddr,
@@ -1573,36 +1574,40 @@ out_err:
  *
  * return 0 if active open request is sent, < 0 otherwise.
  */
-int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin)
+int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn,
+			struct sockaddr_in *usin)
 {
 	struct rtable *rt;
-	struct net_device *dev;
 	struct cxgb3i_sdev_data *cdata;
 	struct t3cdev *cdev;
 	__be32 sipv4;
 	int err;
 
+	c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
+
 	if (usin->sin_family != AF_INET)
 		return -EAFNOSUPPORT;
 
 	c3cn->daddr.sin_port = usin->sin_port;
 	c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
 
-	rt = find_route(c3cn->saddr.sin_addr.s_addr,
+	rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
 			c3cn->daddr.sin_addr.s_addr,
 			c3cn->saddr.sin_port,
 			c3cn->daddr.sin_port);
 	if (rt == NULL) {
-		c3cn_conn_debug("NO route to 0x%x, port %u.\n",
+		c3cn_conn_debug("NO route to 0x%x, port %u, dev %s.\n",
 				c3cn->daddr.sin_addr.s_addr,
-				ntohs(c3cn->daddr.sin_port));
+				ntohs(c3cn->daddr.sin_port),
+				dev ? dev->name : "any");
 		return -ENETUNREACH;
 	}
 
 	if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) {
-		c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n",
+		c3cn_conn_debug("multi-cast route to 0x%x, port %u, dev %s.\n",
 				c3cn->daddr.sin_addr.s_addr,
-				ntohs(c3cn->daddr.sin_port));
+				ntohs(c3cn->daddr.sin_port),
+				dev ? dev->name : "any");
 		ip_rt_put(rt);
 		return -ENETUNREACH;
 	}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h
index ebfca960c0a..6a1d86b1faf 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h
@@ -169,7 +169,8 @@ void cxgb3i_sdev_add(struct t3cdev *, struct cxgb3_client *);
 void cxgb3i_sdev_remove(struct t3cdev *);
 
 struct s3_conn *cxgb3i_c3cn_create(void);
-int cxgb3i_c3cn_connect(struct s3_conn *, struct sockaddr_in *);
+int cxgb3i_c3cn_connect(struct net_device *, struct s3_conn *,
+			struct sockaddr_in *);
 void cxgb3i_c3cn_rx_credits(struct s3_conn *, int);
 int cxgb3i_c3cn_send_pdus(struct s3_conn *, struct sk_buff *);
 void cxgb3i_c3cn_release(struct s3_conn *);
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 43b8c51e98d..fd0544f7da8 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -561,6 +561,12 @@ static int rdac_check_sense(struct scsi_device *sdev,
 	struct rdac_dh_data *h = get_rdac_data(sdev);
 	switch (sense_hdr->sense_key) {
 	case NOT_READY:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
+			/* LUN Not Ready - Logical Unit Not Ready and is in
+			* the process of becoming ready
+			* Just retry.
+			*/
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
 			/* LUN Not Ready - Storage firmware incompatible
 			 * Manual code synchonisation required.
diff --git a/drivers/scsi/dpt/osd_util.h b/drivers/scsi/dpt/osd_util.h
index 4b56c0436ba..b2613c2eaac 100644
--- a/drivers/scsi/dpt/osd_util.h
+++ b/drivers/scsi/dpt/osd_util.h
@@ -342,7 +342,7 @@ uLONG osdGetThreadID(void);
 /* wakes up the specifed thread */
 void osdWakeThread(uLONG);
 
-/* osd sleep for x miliseconds */
+/* osd sleep for x milliseconds */
 void osdSleep(uLONG);
 
 #define DPT_THREAD_PRIORITY_LOWEST 0x00
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index be5099dd94b..c7076ce25e2 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1825,7 +1825,7 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
 	if (linked_comm && SCpnt->device->queue_depth > 2
 	    && TLDEV(SCpnt->device->type)) {
 		ha->cp_stat[i] = READY;
-		flush_dev(SCpnt->device, SCpnt->request->sector, ha, 0);
+		flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0);
 		return 0;
 	}
 
@@ -2144,13 +2144,13 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
 		if (!cpp->din)
 			input_only = 0;
 
-		if (SCpnt->request->sector < minsec)
-			minsec = SCpnt->request->sector;
-		if (SCpnt->request->sector > maxsec)
-			maxsec = SCpnt->request->sector;
+		if (blk_rq_pos(SCpnt->request) < minsec)
+			minsec = blk_rq_pos(SCpnt->request);
+		if (blk_rq_pos(SCpnt->request) > maxsec)
+			maxsec = blk_rq_pos(SCpnt->request);
 
-		sl[n] = SCpnt->request->sector;
-		ioseek += SCpnt->request->nr_sectors;
+		sl[n] = blk_rq_pos(SCpnt->request);
+		ioseek += blk_rq_sectors(SCpnt->request);
 
 		if (!n)
 			continue;
@@ -2190,7 +2190,7 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
 			k = il[n];
 			cpp = &ha->cp[k];
 			SCpnt = cpp->SCpnt;
-			ll[n] = SCpnt->request->nr_sectors;
+			ll[n] = blk_rq_sectors(SCpnt->request);
 			pl[n] = SCpnt->serial_number;
 
 			if (!n)
@@ -2236,12 +2236,12 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
 			cpp = &ha->cp[k];
 			SCpnt = cpp->SCpnt;
 			scmd_printk(KERN_INFO, SCpnt,
-			    "%s pid %ld mb %d fc %d nr %d sec %ld ns %ld"
+			    "%s pid %ld mb %d fc %d nr %d sec %ld ns %u"
 			     " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
 			     (ihdlr ? "ihdlr" : "qcomm"),
 			     SCpnt->serial_number, k, flushcount,
-			     n_ready, SCpnt->request->sector,
-			     SCpnt->request->nr_sectors, cursec, YESNO(s),
+			     n_ready, blk_rq_pos(SCpnt->request),
+			     blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
 			     YESNO(r), YESNO(rev), YESNO(input_only),
 			     YESNO(overlap), cpp->din);
 		}
@@ -2408,7 +2408,7 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost)
 
 	if (linked_comm && SCpnt->device->queue_depth > 2
 	    && TLDEV(SCpnt->device->type))
-		flush_dev(SCpnt->device, SCpnt->request->sector, ha, 1);
+		flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1);
 
 	tstatus = status_byte(spp->target_status);
 
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 03e1926f40b..e606b4829d4 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -54,7 +54,6 @@ MODULE_LICENSE("GPL v2");
 /* fcoe host list */
 LIST_HEAD(fcoe_hostlist);
 DEFINE_RWLOCK(fcoe_hostlist_lock);
-DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
 DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
 
 /* Function Prototypes */
@@ -71,7 +70,7 @@ static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
 static int fcoe_hostlist_add(const struct fc_lport *);
 static int fcoe_hostlist_remove(const struct fc_lport *);
 
-static int fcoe_check_wait_queue(struct fc_lport *);
+static void fcoe_check_wait_queue(struct fc_lport *, struct sk_buff *);
 static int fcoe_device_notification(struct notifier_block *, ulong, void *);
 static void fcoe_dev_setup(void);
 static void fcoe_dev_cleanup(void);
@@ -146,6 +145,7 @@ static int fcoe_lport_config(struct fc_lport *lp)
 	lp->link_up = 0;
 	lp->qfull = 0;
 	lp->max_retry_count = 3;
+	lp->max_rport_retry_count = 3;
 	lp->e_d_tov = 2 * 1000;	/* FC-FS default */
 	lp->r_a_tov = 2 * 2 * 1000;
 	lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
@@ -167,6 +167,18 @@ static int fcoe_lport_config(struct fc_lport *lp)
 }
 
 /**
+ * fcoe_queue_timer() - fcoe queue timer
+ * @lp: the fc_lport pointer
+ *
+ * Calls fcoe_check_wait_queue on timeout
+ *
+ */
+static void fcoe_queue_timer(ulong lp)
+{
+	fcoe_check_wait_queue((struct fc_lport *)lp, NULL);
+}
+
+/**
  * fcoe_netdev_config() - Set up netdev for SW FCoE
  * @lp : ptr to the fc_lport
  * @netdev : ptr to the associated netdevice struct
@@ -236,6 +248,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	}
 	skb_queue_head_init(&fc->fcoe_pending_queue);
 	fc->fcoe_pending_queue_active = 0;
+	setup_timer(&fc->timer, fcoe_queue_timer, (unsigned long)lp);
 
 	/* setup Source Mac Address */
 	memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
@@ -386,6 +399,9 @@ static int fcoe_if_destroy(struct net_device *netdev)
 	/* Free existing skbs */
 	fcoe_clean_pending_queue(lp);
 
+	/* Stop the timer */
+	del_timer_sync(&fc->timer);
+
 	/* Free memory used by statistical counters */
 	fc_lport_free_stats(lp);
 
@@ -988,7 +1004,7 @@ u32 fcoe_fc_crc(struct fc_frame *fp)
  */
 int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 {
-	int wlen, rc = 0;
+	int wlen;
 	u32 crc;
 	struct ethhdr *eh;
 	struct fcoe_crc_eof *cp;
@@ -1021,8 +1037,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 	sof = fr_sof(fp);
 	eof = fr_eof(fp);
 
-	elen = (fc->real_dev->priv_flags & IFF_802_1Q_VLAN) ?
-		sizeof(struct vlan_ethhdr) : sizeof(struct ethhdr);
+	elen = sizeof(struct ethhdr);
 	hlen = sizeof(struct fcoe_hdr);
 	tlen = sizeof(struct fcoe_crc_eof);
 	wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE;
@@ -1107,18 +1122,9 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 	/* send down to lld */
 	fr_dev(fp) = lp;
 	if (fc->fcoe_pending_queue.qlen)
-		rc = fcoe_check_wait_queue(lp);
-
-	if (rc == 0)
-		rc = fcoe_start_io(skb);
-
-	if (rc) {
-		spin_lock_bh(&fc->fcoe_pending_queue.lock);
-		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
-		spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-		if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-			lp->qfull = 1;
-	}
+		fcoe_check_wait_queue(lp, skb);
+	else if (fcoe_start_io(skb))
+		fcoe_check_wait_queue(lp, skb);
 
 	return 0;
 }
@@ -1268,32 +1274,6 @@ int fcoe_percpu_receive_thread(void *arg)
 }
 
 /**
- * fcoe_watchdog() - fcoe timer callback
- * @vp:
- *
- * This checks the pending queue length for fcoe and set lport qfull
- * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
- * fcoe_hostlist.
- *
- * Returns: 0 for success
- */
-void fcoe_watchdog(ulong vp)
-{
-	struct fcoe_softc *fc;
-
-	read_lock(&fcoe_hostlist_lock);
-	list_for_each_entry(fc, &fcoe_hostlist, list) {
-		if (fc->ctlr.lp)
-			fcoe_check_wait_queue(fc->ctlr.lp);
-	}
-	read_unlock(&fcoe_hostlist_lock);
-
-	fcoe_timer.expires = jiffies + (1 * HZ);
-	add_timer(&fcoe_timer);
-}
-
-
-/**
  * fcoe_check_wait_queue() - attempt to clear the transmit backlog
  * @lp: the fc_lport
  *
@@ -1305,16 +1285,17 @@ void fcoe_watchdog(ulong vp)
  * The wait_queue is used when the skb transmit fails. skb will go
  * in the wait_queue which will be emptied by the timer function or
  * by the next skb transmit.
- *
- * Returns: 0 for success
  */
-static int fcoe_check_wait_queue(struct fc_lport *lp)
+static void fcoe_check_wait_queue(struct fc_lport *lp, struct sk_buff *skb)
 {
 	struct fcoe_softc *fc = lport_priv(lp);
-	struct sk_buff *skb;
-	int rc = -1;
+	int rc;
 
 	spin_lock_bh(&fc->fcoe_pending_queue.lock);
+
+	if (skb)
+		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
+
 	if (fc->fcoe_pending_queue_active)
 		goto out;
 	fc->fcoe_pending_queue_active = 1;
@@ -1340,23 +1321,26 @@ static int fcoe_check_wait_queue(struct fc_lport *lp)
 
 	if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
 		lp->qfull = 0;
+	if (fc->fcoe_pending_queue.qlen && !timer_pending(&fc->timer))
+		mod_timer(&fc->timer, jiffies + 2);
 	fc->fcoe_pending_queue_active = 0;
-	rc = fc->fcoe_pending_queue.qlen;
 out:
+	if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
+		lp->qfull = 1;
 	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-	return rc;
+	return;
 }
 
 /**
  * fcoe_dev_setup() - setup link change notification interface
  */
-static void fcoe_dev_setup()
+static void fcoe_dev_setup(void)
 {
 	register_netdevice_notifier(&fcoe_notifier);
 }
 
 /**
- * fcoe_dev_setup() - cleanup link change notification interface
+ * fcoe_dev_cleanup() - cleanup link change notification interface
  */
 static void fcoe_dev_cleanup(void)
 {
@@ -1815,10 +1799,6 @@ static int __init fcoe_init(void)
 	/* Setup link change notification */
 	fcoe_dev_setup();
 
-	setup_timer(&fcoe_timer, fcoe_watchdog, 0);
-
-	mod_timer(&fcoe_timer, jiffies + (10 * HZ));
-
 	fcoe_if_init();
 
 	return 0;
@@ -1844,9 +1824,6 @@ static void __exit fcoe_exit(void)
 
 	fcoe_dev_cleanup();
 
-	/* Stop the timer */
-	del_timer_sync(&fcoe_timer);
-
 	/* releases the associated fcoe hosts */
 	list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
 		fcoe_if_destroy(fc->real_dev);
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index 917aae88689..a1eb8c1988b 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -61,6 +61,7 @@ struct fcoe_softc {
 	struct packet_type  fip_packet_type;
 	struct sk_buff_head fcoe_pending_queue;
 	u8	fcoe_pending_queue_active;
+	struct timer_list timer;		/* queue timer */
 	struct fcoe_ctlr ctlr;
 };
 
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 62ba0f39c6b..929411880e4 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -213,7 +213,7 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
 	sol->desc.size.fd_size = htons(fcoe_size);
 
 	skb_put(skb, sizeof(*sol));
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -365,7 +365,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, int ports, u8 *sa)
 	}
 
 	skb_put(skb, len);
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -424,7 +424,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip,
 	if (dtype != ELS_FLOGI)
 		memcpy(mac->fd_mac, fip->data_src_addr, ETH_ALEN);
 
-	skb->protocol = htons(ETH_P_802_3);
+	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	return 0;
@@ -447,14 +447,10 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	u16 old_xid;
 	u8 op;
 
-	if (fip->state == FIP_ST_NON_FIP)
-		return 0;
-
 	fh = (struct fc_frame_header *)skb->data;
 	op = *(u8 *)(fh + 1);
 
-	switch (op) {
-	case ELS_FLOGI:
+	if (op == ELS_FLOGI) {
 		old_xid = fip->flogi_oxid;
 		fip->flogi_oxid = ntohs(fh->fh_ox_id);
 		if (fip->state == FIP_ST_AUTO) {
@@ -466,6 +462,15 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 			fip->map_dest = 1;
 			return 0;
 		}
+		if (fip->state == FIP_ST_NON_FIP)
+			fip->map_dest = 1;
+	}
+
+	if (fip->state == FIP_ST_NON_FIP)
+		return 0;
+
+	switch (op) {
+	case ELS_FLOGI:
 		op = FIP_DT_FLOGI;
 		break;
 	case ELS_FDISC:
diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile
new file mode 100644
index 00000000000..37c3440bc17
--- /dev/null
+++ b/drivers/scsi/fnic/Makefile
@@ -0,0 +1,15 @@
+obj-$(CONFIG_FCOE_FNIC) += fnic.o
+
+fnic-y	:= \
+	fnic_attrs.o \
+	fnic_isr.o \
+	fnic_main.o \
+	fnic_res.o \
+	fnic_fcs.o \
+	fnic_scsi.o \
+	vnic_cq.o \
+	vnic_dev.o \
+	vnic_intr.o \
+	vnic_rq.o \
+	vnic_wq_copy.o \
+	vnic_wq.o
diff --git a/drivers/scsi/fnic/cq_desc.h b/drivers/scsi/fnic/cq_desc.h
new file mode 100644
index 00000000000..d1225cf6320
--- /dev/null
+++ b/drivers/scsi/fnic/cq_desc.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_DESC_H_
+#define _CQ_DESC_H_
+
+/*
+ * Completion queue descriptor types
+ */
+enum cq_desc_types {
+	CQ_DESC_TYPE_WQ_ENET = 0,
+	CQ_DESC_TYPE_DESC_COPY = 1,
+	CQ_DESC_TYPE_WQ_EXCH = 2,
+	CQ_DESC_TYPE_RQ_ENET = 3,
+	CQ_DESC_TYPE_RQ_FCP = 4,
+};
+
+/* Completion queue descriptor: 16B
+ *
+ * All completion queues have this basic layout.  The
+ * type_specfic area is unique for each completion
+ * queue type.
+ */
+struct cq_desc {
+	__le16 completed_index;
+	__le16 q_number;
+	u8 type_specfic[11];
+	u8 type_color;
+};
+
+#define CQ_DESC_TYPE_BITS        4
+#define CQ_DESC_TYPE_MASK        ((1 << CQ_DESC_TYPE_BITS) - 1)
+#define CQ_DESC_COLOR_MASK       1
+#define CQ_DESC_COLOR_SHIFT      7
+#define CQ_DESC_Q_NUM_BITS       10
+#define CQ_DESC_Q_NUM_MASK       ((1 << CQ_DESC_Q_NUM_BITS) - 1)
+#define CQ_DESC_COMP_NDX_BITS    12
+#define CQ_DESC_COMP_NDX_MASK    ((1 << CQ_DESC_COMP_NDX_BITS) - 1)
+
+static inline void cq_desc_dec(const struct cq_desc *desc_arg,
+	u8 *type, u8 *color, u16 *q_number, u16 *completed_index)
+{
+	const struct cq_desc *desc = desc_arg;
+	const u8 type_color = desc->type_color;
+
+	*color = (type_color >> CQ_DESC_COLOR_SHIFT) & CQ_DESC_COLOR_MASK;
+
+	/*
+	 * Make sure color bit is read from desc *before* other fields
+	 * are read from desc.  Hardware guarantees color bit is last
+	 * bit (byte) written.  Adding the rmb() prevents the compiler
+	 * and/or CPU from reordering the reads which would potentially
+	 * result in reading stale values.
+	 */
+
+	rmb();
+
+	*type = type_color & CQ_DESC_TYPE_MASK;
+	*q_number = le16_to_cpu(desc->q_number) & CQ_DESC_Q_NUM_MASK;
+	*completed_index = le16_to_cpu(desc->completed_index) &
+		CQ_DESC_COMP_NDX_MASK;
+}
+
+#endif /* _CQ_DESC_H_ */
diff --git a/drivers/scsi/fnic/cq_enet_desc.h b/drivers/scsi/fnic/cq_enet_desc.h
new file mode 100644
index 00000000000..a9fa26f82dd
--- /dev/null
+++ b/drivers/scsi/fnic/cq_enet_desc.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_ENET_DESC_H_
+#define _CQ_ENET_DESC_H_
+
+#include "cq_desc.h"
+
+/* Ethernet completion queue descriptor: 16B */
+struct cq_enet_wq_desc {
+	__le16 completed_index;
+	__le16 q_number;
+	u8 reserved[11];
+	u8 type_color;
+};
+
+static inline void cq_enet_wq_desc_dec(struct cq_enet_wq_desc *desc,
+	u8 *type, u8 *color, u16 *q_number, u16 *completed_index)
+{
+	cq_desc_dec((struct cq_desc *)desc, type,
+		color, q_number, completed_index);
+}
+
+/* Completion queue descriptor: Ethernet receive queue, 16B */
+struct cq_enet_rq_desc {
+	__le16 completed_index_flags;
+	__le16 q_number_rss_type_flags;
+	__le32 rss_hash;
+	__le16 bytes_written_flags;
+	__le16 vlan;
+	__le16 checksum_fcoe;
+	u8 flags;
+	u8 type_color;
+};
+
+#define CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT          (0x1 << 12)
+#define CQ_ENET_RQ_DESC_FLAGS_FCOE                  (0x1 << 13)
+#define CQ_ENET_RQ_DESC_FLAGS_EOP                   (0x1 << 14)
+#define CQ_ENET_RQ_DESC_FLAGS_SOP                   (0x1 << 15)
+
+#define CQ_ENET_RQ_DESC_RSS_TYPE_BITS               4
+#define CQ_ENET_RQ_DESC_RSS_TYPE_MASK \
+	((1 << CQ_ENET_RQ_DESC_RSS_TYPE_BITS) - 1)
+#define CQ_ENET_RQ_DESC_RSS_TYPE_NONE               0
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv4               1
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4           2
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6               3
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6           4
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX            5
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX        6
+
+#define CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC         (0x1 << 14)
+
+#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS          14
+#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK \
+	((1 << CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FLAGS_TRUNCATED             (0x1 << 14)
+#define CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED         (0x1 << 15)
+
+#define CQ_ENET_RQ_DESC_FCOE_SOF_BITS               4
+#define CQ_ENET_RQ_DESC_FCOE_SOF_MASK \
+	((1 << CQ_ENET_RQ_DESC_FCOE_SOF_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FCOE_EOF_BITS               8
+#define CQ_ENET_RQ_DESC_FCOE_EOF_MASK \
+	((1 << CQ_ENET_RQ_DESC_FCOE_EOF_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT              8
+
+#define CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK       (0x1 << 0)
+#define CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK              (0x1 << 0)
+#define CQ_ENET_RQ_DESC_FLAGS_UDP                   (0x1 << 1)
+#define CQ_ENET_RQ_DESC_FCOE_ENC_ERROR              (0x1 << 1)
+#define CQ_ENET_RQ_DESC_FLAGS_TCP                   (0x1 << 2)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK          (0x1 << 3)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV6                  (0x1 << 4)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4                  (0x1 << 5)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT         (0x1 << 6)
+#define CQ_ENET_RQ_DESC_FLAGS_FCS_OK                (0x1 << 7)
+
+static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
+	u8 *type, u8 *color, u16 *q_number, u16 *completed_index,
+	u8 *ingress_port, u8 *fcoe, u8 *eop, u8 *sop, u8 *rss_type,
+	u8 *csum_not_calc, u32 *rss_hash, u16 *bytes_written, u8 *packet_error,
+	u8 *vlan_stripped, u16 *vlan, u16 *checksum, u8 *fcoe_sof,
+	u8 *fcoe_fc_crc_ok, u8 *fcoe_enc_error, u8 *fcoe_eof,
+	u8 *tcp_udp_csum_ok, u8 *udp, u8 *tcp, u8 *ipv4_csum_ok,
+	u8 *ipv6, u8 *ipv4, u8 *ipv4_fragment, u8 *fcs_ok)
+{
+	u16 completed_index_flags = le16_to_cpu(desc->completed_index_flags);
+	u16 q_number_rss_type_flags =
+		le16_to_cpu(desc->q_number_rss_type_flags);
+	u16 bytes_written_flags = le16_to_cpu(desc->bytes_written_flags);
+
+	cq_desc_dec((struct cq_desc *)desc, type,
+		color, q_number, completed_index);
+
+	*ingress_port = (completed_index_flags &
+		CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT) ? 1 : 0;
+	*fcoe = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_FCOE) ?
+		1 : 0;
+	*eop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_EOP) ?
+		1 : 0;
+	*sop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_SOP) ?
+		1 : 0;
+
+	*rss_type = (u8)((q_number_rss_type_flags >> CQ_DESC_Q_NUM_BITS) &
+		CQ_ENET_RQ_DESC_RSS_TYPE_MASK);
+	*csum_not_calc = (q_number_rss_type_flags &
+		CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC) ? 1 : 0;
+
+	*rss_hash = le32_to_cpu(desc->rss_hash);
+
+	*bytes_written = bytes_written_flags &
+		CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK;
+	*packet_error = (bytes_written_flags &
+		CQ_ENET_RQ_DESC_FLAGS_TRUNCATED) ? 1 : 0;
+	*vlan_stripped = (bytes_written_flags &
+		CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED) ? 1 : 0;
+
+	*vlan = le16_to_cpu(desc->vlan);
+
+	if (*fcoe) {
+		*fcoe_sof = (u8)(le16_to_cpu(desc->checksum_fcoe) &
+			CQ_ENET_RQ_DESC_FCOE_SOF_MASK);
+		*fcoe_fc_crc_ok = (desc->flags &
+			CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
+		*fcoe_enc_error = (desc->flags &
+			CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
+		*fcoe_eof = (u8)((desc->checksum_fcoe >>
+			CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
+			CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
+		*checksum = 0;
+	} else {
+		*fcoe_sof = 0;
+		*fcoe_fc_crc_ok = 0;
+		*fcoe_enc_error = 0;
+		*fcoe_eof = 0;
+		*checksum = le16_to_cpu(desc->checksum_fcoe);
+	}
+
+	*tcp_udp_csum_ok =
+		(desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK) ? 1 : 0;
+	*udp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_UDP) ? 1 : 0;
+	*tcp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP) ? 1 : 0;
+	*ipv4_csum_ok =
+		(desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK) ? 1 : 0;
+	*ipv6 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV6) ? 1 : 0;
+	*ipv4 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4) ? 1 : 0;
+	*ipv4_fragment =
+		(desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT) ? 1 : 0;
+	*fcs_ok = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ? 1 : 0;
+}
+
+#endif /* _CQ_ENET_DESC_H_ */
diff --git a/drivers/scsi/fnic/cq_exch_desc.h b/drivers/scsi/fnic/cq_exch_desc.h
new file mode 100644
index 00000000000..501660cfe22
--- /dev/null
+++ b/drivers/scsi/fnic/cq_exch_desc.h
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_EXCH_DESC_H_
+#define _CQ_EXCH_DESC_H_
+
+#include "cq_desc.h"
+
+/* Exchange completion queue descriptor: 16B */
+struct cq_exch_wq_desc {
+	u16 completed_index;
+	u16 q_number;
+	u16 exchange_id;
+	u8  tmpl;
+	u8  reserved0;
+	u32 reserved1;
+	u8  exch_status;
+	u8  reserved2[2];
+	u8  type_color;
+};
+
+#define CQ_EXCH_WQ_STATUS_BITS      2
+#define CQ_EXCH_WQ_STATUS_MASK      ((1 << CQ_EXCH_WQ_STATUS_BITS) - 1)
+
+enum cq_exch_status_types {
+	CQ_EXCH_WQ_STATUS_TYPE_COMPLETE = 0,
+	CQ_EXCH_WQ_STATUS_TYPE_ABORT = 1,
+	CQ_EXCH_WQ_STATUS_TYPE_SGL_EOF = 2,
+	CQ_EXCH_WQ_STATUS_TYPE_TMPL_ERR = 3,
+};
+
+static inline void cq_exch_wq_desc_dec(struct cq_exch_wq_desc *desc_ptr,
+				       u8  *type,
+				       u8  *color,
+				       u16 *q_number,
+				       u16 *completed_index,
+				       u8  *exch_status)
+{
+	cq_desc_dec((struct cq_desc *)desc_ptr, type,
+		    color, q_number, completed_index);
+	*exch_status = desc_ptr->exch_status & CQ_EXCH_WQ_STATUS_MASK;
+}
+
+struct cq_fcp_rq_desc {
+	u16 completed_index_eop_sop_prt;
+	u16 q_number;
+	u16 exchange_id;
+	u16 tmpl;
+	u16 bytes_written;
+	u16 vlan;
+	u8  sof;
+	u8  eof;
+	u8  fcs_fer_fck;
+	u8  type_color;
+};
+
+#define CQ_FCP_RQ_DESC_FLAGS_SOP		(1 << 15)
+#define CQ_FCP_RQ_DESC_FLAGS_EOP		(1 << 14)
+#define CQ_FCP_RQ_DESC_FLAGS_PRT		(1 << 12)
+#define CQ_FCP_RQ_DESC_TMPL_MASK		0x1f
+#define CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK	0x3fff
+#define CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT		14
+#define CQ_FCP_RQ_DESC_PACKET_ERR_MASK (1 << CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT)
+#define CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT	15
+#define CQ_FCP_RQ_DESC_VS_STRIPPED_MASK (1 << CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT)
+#define CQ_FCP_RQ_DESC_FC_CRC_OK_MASK		0x1
+#define CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT		1
+#define CQ_FCP_RQ_DESC_FCOE_ERR_MASK (1 << CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT)
+#define CQ_FCP_RQ_DESC_FCS_OK_SHIFT		7
+#define CQ_FCP_RQ_DESC_FCS_OK_MASK (1 << CQ_FCP_RQ_DESC_FCS_OK_SHIFT)
+
+static inline void cq_fcp_rq_desc_dec(struct cq_fcp_rq_desc *desc_ptr,
+				      u8  *type,
+				      u8  *color,
+				      u16 *q_number,
+				      u16 *completed_index,
+				      u8  *eop,
+				      u8  *sop,
+				      u8  *fck,
+				      u16 *exchange_id,
+				      u16 *tmpl,
+				      u32 *bytes_written,
+				      u8  *sof,
+				      u8  *eof,
+				      u8  *ingress_port,
+				      u8  *packet_err,
+				      u8  *fcoe_err,
+				      u8  *fcs_ok,
+				      u8  *vlan_stripped,
+				      u16 *vlan)
+{
+	cq_desc_dec((struct cq_desc *)desc_ptr, type,
+		    color, q_number, completed_index);
+	*eop = (desc_ptr->completed_index_eop_sop_prt &
+		CQ_FCP_RQ_DESC_FLAGS_EOP) ? 1 : 0;
+	*sop = (desc_ptr->completed_index_eop_sop_prt &
+		CQ_FCP_RQ_DESC_FLAGS_SOP) ? 1 : 0;
+	*ingress_port =
+		(desc_ptr->completed_index_eop_sop_prt &
+		 CQ_FCP_RQ_DESC_FLAGS_PRT) ? 1 : 0;
+	*exchange_id = desc_ptr->exchange_id;
+	*tmpl = desc_ptr->tmpl & CQ_FCP_RQ_DESC_TMPL_MASK;
+	*bytes_written =
+		desc_ptr->bytes_written & CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK;
+	*packet_err =
+		(desc_ptr->bytes_written & CQ_FCP_RQ_DESC_PACKET_ERR_MASK) >>
+		CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT;
+	*vlan_stripped =
+		(desc_ptr->bytes_written & CQ_FCP_RQ_DESC_VS_STRIPPED_MASK) >>
+		CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT;
+	*vlan = desc_ptr->vlan;
+	*sof = desc_ptr->sof;
+	*fck = desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FC_CRC_OK_MASK;
+	*fcoe_err = (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCOE_ERR_MASK) >>
+		CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT;
+	*eof = desc_ptr->eof;
+	*fcs_ok =
+		(desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCS_OK_MASK) >>
+		CQ_FCP_RQ_DESC_FCS_OK_SHIFT;
+}
+
+struct cq_sgl_desc {
+	u16 exchange_id;
+	u16 q_number;
+	u32 active_burst_offset;
+	u32 tot_data_bytes;
+	u16 tmpl;
+	u8  sgl_err;
+	u8  type_color;
+};
+
+enum cq_sgl_err_types {
+	CQ_SGL_ERR_NO_ERROR = 0,
+	CQ_SGL_ERR_OVERFLOW,         /* data ran beyond end of SGL */
+	CQ_SGL_ERR_SGL_LCL_ADDR_ERR, /* sgl access to local vnic addr illegal*/
+	CQ_SGL_ERR_ADDR_RSP_ERR,     /* sgl address error */
+	CQ_SGL_ERR_DATA_RSP_ERR,     /* sgl data rsp error */
+	CQ_SGL_ERR_CNT_ZERO_ERR,     /* SGL count is 0 */
+	CQ_SGL_ERR_CNT_MAX_ERR,      /* SGL count is larger than supported */
+	CQ_SGL_ERR_ORDER_ERR,        /* frames recv on both ports, order err */
+	CQ_SGL_ERR_DATA_LCL_ADDR_ERR,/* sgl data buf to local vnic addr ill */
+	CQ_SGL_ERR_HOST_CQ_ERR,      /* host cq entry to local vnic addr ill */
+};
+
+#define CQ_SGL_SGL_ERR_MASK             0x1f
+#define CQ_SGL_TMPL_MASK                0x1f
+
+static inline void cq_sgl_desc_dec(struct cq_sgl_desc *desc_ptr,
+				   u8  *type,
+				   u8  *color,
+				   u16 *q_number,
+				   u16 *exchange_id,
+				   u32 *active_burst_offset,
+				   u32 *tot_data_bytes,
+				   u16 *tmpl,
+				   u8  *sgl_err)
+{
+	/* Cheat a little by assuming exchange_id is the same as completed
+	   index */
+	cq_desc_dec((struct cq_desc *)desc_ptr, type, color, q_number,
+		    exchange_id);
+	*active_burst_offset = desc_ptr->active_burst_offset;
+	*tot_data_bytes = desc_ptr->tot_data_bytes;
+	*tmpl = desc_ptr->tmpl & CQ_SGL_TMPL_MASK;
+	*sgl_err = desc_ptr->sgl_err & CQ_SGL_SGL_ERR_MASK;
+}
+
+#endif /* _CQ_EXCH_DESC_H_ */
diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h
new file mode 100644
index 00000000000..12d770d885c
--- /dev/null
+++ b/drivers/scsi/fnic/fcpio.h
@@ -0,0 +1,780 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FCPIO_H_
+#define _FCPIO_H_
+
+#include <linux/if_ether.h>
+
+/*
+ * This header file includes all of the data structures used for
+ * communication by the host driver to the fcp firmware.
+ */
+
+/*
+ * Exchange and sequence id space allocated to the host driver
+ */
+#define FCPIO_HOST_EXCH_RANGE_START         0x1000
+#define FCPIO_HOST_EXCH_RANGE_END           0x1fff
+#define FCPIO_HOST_SEQ_ID_RANGE_START       0x80
+#define FCPIO_HOST_SEQ_ID_RANGE_END         0xff
+
+/*
+ * Command entry type
+ */
+enum fcpio_type {
+	/*
+	 * Initiator request types
+	 */
+	FCPIO_ICMND_16 = 0x1,
+	FCPIO_ICMND_32,
+	FCPIO_ICMND_CMPL,
+	FCPIO_ITMF,
+	FCPIO_ITMF_CMPL,
+
+	/*
+	 * Target request types
+	 */
+	FCPIO_TCMND_16 = 0x11,
+	FCPIO_TCMND_32,
+	FCPIO_TDATA,
+	FCPIO_TXRDY,
+	FCPIO_TRSP,
+	FCPIO_TDRSP_CMPL,
+	FCPIO_TTMF,
+	FCPIO_TTMF_ACK,
+	FCPIO_TABORT,
+	FCPIO_TABORT_CMPL,
+
+	/*
+	 * Misc request types
+	 */
+	FCPIO_ACK = 0x20,
+	FCPIO_RESET,
+	FCPIO_RESET_CMPL,
+	FCPIO_FLOGI_REG,
+	FCPIO_FLOGI_REG_CMPL,
+	FCPIO_ECHO,
+	FCPIO_ECHO_CMPL,
+	FCPIO_LUNMAP_CHNG,
+	FCPIO_LUNMAP_REQ,
+	FCPIO_LUNMAP_REQ_CMPL,
+	FCPIO_FLOGI_FIP_REG,
+	FCPIO_FLOGI_FIP_REG_CMPL,
+};
+
+/*
+ * Header status codes from the firmware
+ */
+enum fcpio_status {
+	FCPIO_SUCCESS = 0,              /* request was successful */
+
+	/*
+	 * If a request to the firmware is rejected, the original request
+	 * header will be returned with the status set to one of the following:
+	 */
+	FCPIO_INVALID_HEADER,    /* header contains invalid data */
+	FCPIO_OUT_OF_RESOURCE,   /* out of resources to complete request */
+	FCPIO_INVALID_PARAM,     /* some parameter in request is invalid */
+	FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
+	FCPIO_IO_NOT_FOUND,      /* requested I/O was not found */
+
+	/*
+	 * Once a request is processed, the firmware will usually return
+	 * a cmpl message type.  In cases where errors occurred,
+	 * the header status field would be filled in with one of the following:
+	 */
+	FCPIO_ABORTED = 0x41,     /* request was aborted */
+	FCPIO_TIMEOUT,            /* request was timed out */
+	FCPIO_SGL_INVALID,        /* request was aborted due to sgl error */
+	FCPIO_MSS_INVALID,        /* request was aborted due to mss error */
+	FCPIO_DATA_CNT_MISMATCH,  /* recv/sent more/less data than exp. */
+	FCPIO_FW_ERR,             /* request was terminated due to fw error */
+	FCPIO_ITMF_REJECTED,      /* itmf req was rejected by remote node */
+	FCPIO_ITMF_FAILED,        /* itmf req was failed by remote node */
+	FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
+	FCPIO_CMND_REJECTED,      /* request was invalid and rejected */
+	FCPIO_NO_PATH_AVAIL,      /* no paths to the lun was available */
+	FCPIO_PATH_FAILED,        /* i/o sent to current path failed */
+	FCPIO_LUNMAP_CHNG_PEND,   /* i/o rejected due to lunmap change */
+};
+
+/*
+ * The header command tag.  All host requests will use the "tag" field
+ * to mark commands with a unique tag.  When the firmware responds to
+ * a host request, it will copy the tag field into the response.
+ *
+ * The only firmware requests that will use the rx_id/ox_id fields instead
+ * of the tag field will be the target command and target task management
+ * requests.  These two requests do not have corresponding host requests
+ * since they come directly from the FC initiator on the network.
+ */
+struct fcpio_tag {
+	union {
+		u32 req_id;
+		struct {
+			u16 rx_id;
+			u16 ox_id;
+		} ex_id;
+	} u;
+};
+
+static inline void
+fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
+{
+	tag->u.req_id = id;
+}
+
+static inline void
+fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id)
+{
+	*id = tag->u.req_id;
+}
+
+static inline void
+fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
+{
+	tag->u.ex_id.rx_id = rx_id;
+	tag->u.ex_id.ox_id = ox_id;
+}
+
+static inline void
+fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id)
+{
+	*rx_id = tag->u.ex_id.rx_id;
+	*ox_id = tag->u.ex_id.ox_id;
+}
+
+/*
+ * The header for an fcpio request, whether from the firmware or from the
+ * host driver
+ */
+struct fcpio_header {
+	u8            type;           /* enum fcpio_type */
+	u8            status;         /* header status entry */
+	u16           _resvd;         /* reserved */
+	struct fcpio_tag    tag;      /* header tag */
+};
+
+static inline void
+fcpio_header_enc(struct fcpio_header *hdr,
+		 u8 type, u8 status,
+		 struct fcpio_tag tag)
+{
+	hdr->type = type;
+	hdr->status = status;
+	hdr->_resvd = 0;
+	hdr->tag = tag;
+}
+
+static inline void
+fcpio_header_dec(struct fcpio_header *hdr,
+		 u8 *type, u8 *status,
+		 struct fcpio_tag *tag)
+{
+	*type = hdr->type;
+	*status = hdr->status;
+	*tag = hdr->tag;
+}
+
+#define CDB_16      16
+#define CDB_32      32
+#define LUN_ADDRESS 8
+
+/*
+ * fcpio_icmnd_16: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 16-byte command
+ */
+struct fcpio_icmnd_16 {
+	u32	  lunmap_id;		/* index into lunmap table */
+	u8	  special_req_flags;	/* special exchange request flags */
+	u8	  _resvd0[3];	        /* reserved */
+	u32	  sgl_cnt;		/* scatter-gather list count */
+	u32	  sense_len;		/* sense buffer length */
+	u64	  sgl_addr;		/* scatter-gather list addr */
+	u64	  sense_addr;		/* sense buffer address */
+	u8	  crn;			/* SCSI Command Reference No. */
+	u8	  pri_ta;		/* SCSI Priority and Task attribute */
+	u8	  _resvd1;		/* reserved: should be 0 */
+	u8	  flags;		/* command flags */
+	u8	  scsi_cdb[CDB_16];	/* SCSI Cmnd Descriptor Block */
+	u32	  data_len;		/* length of data expected */
+	u8	  lun[LUN_ADDRESS];	/* FC vNIC only: LUN address */
+	u8	  _resvd2;		/* reserved */
+	u8	  d_id[3];		/* FC vNIC only: Target D_ID */
+	u16	  mss;			/* FC vNIC only: max burst */
+	u16	  _resvd3;		/* reserved */
+	u32	  r_a_tov;		/* FC vNIC only: Res. Alloc Timeout */
+	u32	  e_d_tov;	        /* FC vNIC only: Err Detect Timeout */
+};
+
+/*
+ * Special request flags
+ */
+#define FCPIO_ICMND_SRFLAG_RETRY 0x01   /* Enable Retry handling on exchange */
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_ICMND_PTA_SIMPLE      0   /* simple task attribute */
+#define FCPIO_ICMND_PTA_HEADQ       1   /* head of queue task attribute */
+#define FCPIO_ICMND_PTA_ORDERED     2   /* ordered task attribute */
+#define FCPIO_ICMND_PTA_ACA         4   /* auto contingent allegiance */
+#define FCPIO_ICMND_PRI_SHIFT       3   /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_ICMND_RDDATA      0x02    /* read data */
+#define FCPIO_ICMND_WRDATA      0x01    /* write data */
+
+/*
+ * fcpio_icmnd_32: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 32-byte command
+ */
+struct fcpio_icmnd_32 {
+	u32   lunmap_id;              /* index into lunmap table */
+	u8    special_req_flags;      /* special exchange request flags */
+	u8    _resvd0[3];             /* reserved */
+	u32   sgl_cnt;                /* scatter-gather list count */
+	u32   sense_len;              /* sense buffer length */
+	u64   sgl_addr;               /* scatter-gather list addr */
+	u64   sense_addr;             /* sense buffer address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    pri_ta;                 /* SCSI Priority and Task attribute */
+	u8    _resvd1;                /* reserved: should be 0 */
+	u8    flags;                  /* command flags */
+	u8    scsi_cdb[CDB_32];       /* SCSI Cmnd Descriptor Block */
+	u32   data_len;               /* length of data expected */
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    _resvd2;                /* reserved */
+	u8    d_id[3];		      /* FC vNIC only: Target D_ID */
+	u16   mss;                    /* FC vNIC only: max burst */
+	u16   _resvd3;                /* reserved */
+	u32   r_a_tov;                /* FC vNIC only: Res. Alloc Timeout */
+	u32   e_d_tov;                /* FC vNIC only: Error Detect Timeout */
+};
+
+/*
+ * fcpio_itmf: host -> firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * The t_tag field is only needed when the request type is ABT_TASK.
+ */
+struct fcpio_itmf {
+	u32   lunmap_id;              /* index into lunmap table */
+	u32   tm_req;                 /* SCSI Task Management request */
+	u32   t_tag;                  /* header tag of fcpio to be aborted */
+	u32   _resvd;                 /* _reserved */
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    _resvd1;                /* reserved */
+	u8    d_id[3];		      /* FC vNIC only: Target D_ID */
+	u32   r_a_tov;                /* FC vNIC only: R_A_TOV in msec */
+	u32   e_d_tov;                /* FC vNIC only: E_D_TOV in msec */
+};
+
+/*
+ * Task Management request
+ */
+enum fcpio_itmf_tm_req_type {
+	FCPIO_ITMF_ABT_TASK_TERM = 0x01,    /* abort task and terminate */
+	FCPIO_ITMF_ABT_TASK,                /* abort task and issue abts */
+	FCPIO_ITMF_ABT_TASK_SET,            /* abort task set */
+	FCPIO_ITMF_CLR_TASK_SET,            /* clear task set */
+	FCPIO_ITMF_LUN_RESET,               /* logical unit reset task mgmt */
+	FCPIO_ITMF_CLR_ACA,                 /* Clear ACA condition */
+};
+
+/*
+ * fcpio_tdata: host -> firmware request
+ *
+ * used for requesting the firmware to send out a read data transfer for a
+ * target command
+ */
+struct fcpio_tdata {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   flags;                  /* command flags */
+	u32   rel_offset;             /* data sequence relative offset */
+	u32   sgl_cnt;                /* scatter-gather list count */
+	u32   data_len;               /* length of data expected to send */
+	u64   sgl_addr;               /* scatter-gather list address */
+};
+
+/*
+ * Command flags
+ */
+#define FCPIO_TDATA_SCSI_RSP    0x01    /* send a scsi resp. after last frame */
+
+/*
+ * fcpio_txrdy: host -> firmware request
+ *
+ * used for requesting the firmware to send out a write data transfer for a
+ * target command
+ */
+struct fcpio_txrdy {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   _resvd0;                /* reserved */
+	u32   rel_offset;             /* data sequence relative offset */
+	u32   sgl_cnt;                /* scatter-gather list count */
+	u32   data_len;               /* length of data expected to send */
+	u64   sgl_addr;               /* scatter-gather list address */
+};
+
+/*
+ * fcpio_trsp: host -> firmware request
+ *
+ * used for requesting the firmware to send out a response for a target
+ * command
+ */
+struct fcpio_trsp {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   _resvd0;                /* reserved */
+	u32   sense_len;              /* sense data buffer length */
+	u64   sense_addr;             /* sense data buffer address */
+	u16   _resvd1;                /* reserved */
+	u8    flags;                  /* response request flags */
+	u8    scsi_status;            /* SCSI status */
+	u32   residual;               /* SCSI data residual value of I/O */
+};
+
+/*
+ * resposnse request flags
+ */
+#define FCPIO_TRSP_RESID_UNDER  0x08   /* residual is valid and is underflow */
+#define FCPIO_TRSP_RESID_OVER   0x04   /* residual is valid and is overflow */
+
+/*
+ * fcpio_ttmf_ack: host -> firmware response
+ *
+ * used by the host to indicate to the firmware it has received and processed
+ * the target tmf request
+ */
+struct fcpio_ttmf_ack {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   _resvd0;                /* reserved */
+	u32   tmf_status;             /* SCSI task management status */
+};
+
+/*
+ * fcpio_tabort: host -> firmware request
+ *
+ * used by the host to request the firmware to abort a target request that was
+ * received by the firmware
+ */
+struct fcpio_tabort {
+	u16   rx_id;                  /* rx_id of the target request */
+};
+
+/*
+ * fcpio_reset: host -> firmware request
+ *
+ * used by the host to signal a reset of the driver to the firmware
+ * and to request firmware to clean up all outstanding I/O
+ */
+struct fcpio_reset {
+	u32   _resvd;
+};
+
+enum fcpio_flogi_reg_format_type {
+	FCPIO_FLOGI_REG_DEF_DEST = 0,    /* Use the oui | s_id mac format */
+	FCPIO_FLOGI_REG_GW_DEST,         /* Use the fixed gateway mac */
+};
+
+/*
+ * fcpio_flogi_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_reg {
+	u8 format;
+	u8 s_id[3];			/* FC vNIC only: Source S_ID */
+	u8 gateway_mac[ETH_ALEN];	/* Destination gateway mac */
+	u16 _resvd;
+	u32 r_a_tov;			/* R_A_TOV in msec */
+	u32 e_d_tov;			/* E_D_TOV in msec */
+};
+
+/*
+ * fcpio_echo: host -> firmware request
+ *
+ * sends a heartbeat echo request to the firmware
+ */
+struct fcpio_echo {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req: host -> firmware request
+ *
+ * scsi vnic only
+ * sends a request to retrieve the lunmap table for scsi vnics
+ */
+struct fcpio_lunmap_req {
+	u64 addr;                     /* address of the buffer */
+	u32 len;                      /* len of the buffer */
+};
+
+/*
+ * fcpio_flogi_fip_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_fip_reg {
+	u8    _resvd0;
+	u8     s_id[3];               /* FC vNIC only: Source S_ID */
+	u8     fcf_mac[ETH_ALEN];     /* FCF Target destination mac */
+	u16   _resvd1;
+	u32   r_a_tov;                /* R_A_TOV in msec */
+	u32   e_d_tov;                /* E_D_TOV in msec */
+	u8    ha_mac[ETH_ALEN];       /* Host adapter source mac */
+	u16   _resvd2;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the host to the
+ * firmware.  They are 128 bytes per structure.
+ */
+#define FCPIO_HOST_REQ_LEN      128     /* expected length of host requests */
+
+struct fcpio_host_req {
+	struct fcpio_header hdr;
+
+	union {
+		/*
+		 * Defines space needed for request
+		 */
+		u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];
+
+		/*
+		 * Initiator host requests
+		 */
+		struct fcpio_icmnd_16               icmnd_16;
+		struct fcpio_icmnd_32               icmnd_32;
+		struct fcpio_itmf                   itmf;
+
+		/*
+		 * Target host requests
+		 */
+		struct fcpio_tdata                  tdata;
+		struct fcpio_txrdy                  txrdy;
+		struct fcpio_trsp                   trsp;
+		struct fcpio_ttmf_ack               ttmf_ack;
+		struct fcpio_tabort                 tabort;
+
+		/*
+		 * Misc requests
+		 */
+		struct fcpio_reset                  reset;
+		struct fcpio_flogi_reg              flogi_reg;
+		struct fcpio_echo                   echo;
+		struct fcpio_lunmap_req             lunmap_req;
+		struct fcpio_flogi_fip_reg          flogi_fip_reg;
+	} u;
+};
+
+/*
+ * fcpio_icmnd_cmpl: firmware -> host response
+ *
+ * used for sending the host a response to an initiator command
+ */
+struct fcpio_icmnd_cmpl {
+	u8    _resvd0[6];             /* reserved */
+	u8    flags;                  /* response flags */
+	u8    scsi_status;            /* SCSI status */
+	u32   residual;               /* SCSI data residual length */
+	u32   sense_len;              /* SCSI sense length */
+};
+
+/*
+ * response flags
+ */
+#define FCPIO_ICMND_CMPL_RESID_UNDER    0x08    /* resid under and valid */
+#define FCPIO_ICMND_CMPL_RESID_OVER     0x04    /* resid over and valid */
+
+/*
+ * fcpio_itmf_cmpl: firmware -> host response
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct fcpio_itmf_cmpl {
+	u32    _resvd;                /* reserved */
+};
+
+/*
+ * fcpio_tcmnd_16: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 16-Byte
+ * request
+ */
+struct fcpio_tcmnd_16 {
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    pri_ta;                 /* SCSI Priority and Task attribute */
+	u8    _resvd2;                /* reserved: should be 0 */
+	u8    flags;                  /* command flags */
+	u8    scsi_cdb[CDB_16];       /* SCSI Cmnd Descriptor Block */
+	u32   data_len;               /* length of data expected */
+	u8    _resvd1;                /* reserved */
+	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_TCMND_PTA_SIMPLE      0   /* simple task attribute */
+#define FCPIO_TCMND_PTA_HEADQ       1   /* head of queue task attribute */
+#define FCPIO_TCMND_PTA_ORDERED     2   /* ordered task attribute */
+#define FCPIO_TCMND_PTA_ACA         4   /* auto contingent allegiance */
+#define FCPIO_TCMND_PRI_SHIFT       3   /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_TCMND_RDDATA      0x02    /* read data */
+#define FCPIO_TCMND_WRDATA      0x01    /* write data */
+
+/*
+ * fcpio_tcmnd_32: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 32-Byte
+ * request
+ */
+struct fcpio_tcmnd_32 {
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    pri_ta;                 /* SCSI Priority and Task attribute */
+	u8    _resvd2;                /* reserved: should be 0 */
+	u8    flags;                  /* command flags */
+	u8    scsi_cdb[CDB_32];       /* SCSI Cmnd Descriptor Block */
+	u32   data_len;               /* length of data expected */
+	u8    _resvd0;                /* reserved */
+	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * fcpio_tdrsp_cmpl: firmware -> host response
+ *
+ * used by the firmware to notify the host of a response to a host target
+ * command
+ */
+struct fcpio_tdrsp_cmpl {
+	u16   rx_id;                  /* rx_id of the target request */
+	u16   _resvd0;                /* reserved */
+};
+
+/*
+ * fcpio_ttmf: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming task management
+ * function request
+ */
+struct fcpio_ttmf {
+	u8    _resvd0;                /* reserved */
+	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    _resvd2[3];             /* reserved */
+	u32   tmf_type;               /* task management request type */
+};
+
+/*
+ * Task Management request
+ */
+#define FCPIO_TTMF_CLR_ACA      0x40    /* Clear ACA condition */
+#define FCPIO_TTMF_LUN_RESET    0x10    /* logical unit reset task mgmt */
+#define FCPIO_TTMF_CLR_TASK_SET 0x04    /* clear task set */
+#define FCPIO_TTMF_ABT_TASK_SET 0x02    /* abort task set */
+#define FCPIO_TTMF_ABT_TASK     0x01    /* abort task */
+
+/*
+ * fcpio_tabort_cmpl: firmware -> host response
+ *
+ * used by the firmware to respond to a host's tabort request
+ */
+struct fcpio_tabort_cmpl {
+	u16   rx_id;                  /* rx_id of the target request */
+	u16   _resvd0;                /* reserved */
+};
+
+/*
+ * fcpio_ack: firmware -> host response
+ *
+ * used by firmware to notify the host of the last work request received
+ */
+struct fcpio_ack {
+	u16  request_out;             /* last host entry received */
+	u16  _resvd;
+};
+
+/*
+ * fcpio_reset_cmpl: firmware -> host response
+ *
+ * use by firmware to respond to the host's reset request
+ */
+struct fcpio_reset_cmpl {
+	u16   vnic_id;
+};
+
+/*
+ * fcpio_flogi_reg_cmpl: firmware -> host response
+ *
+ * fc vnic only
+ * response to the fcpio_flogi_reg request
+ */
+struct fcpio_flogi_reg_cmpl {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_echo_cmpl: firmware -> host response
+ *
+ * response to the fcpio_echo request
+ */
+struct fcpio_echo_cmpl {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_chng: firmware -> host notification
+ *
+ * scsi vnic only
+ * notifies the host that the lunmap tables have changed
+ */
+struct fcpio_lunmap_chng {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req_cmpl: firmware -> host response
+ *
+ * scsi vnic only
+ * response for lunmap table request from the host
+ */
+struct fcpio_lunmap_req_cmpl {
+	u32 _resvd;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the firmware to
+ * the host.  They are 64 bytes per structure.
+ */
+#define FCPIO_FW_REQ_LEN        64      /* expected length of fw requests */
+struct fcpio_fw_req {
+	struct fcpio_header hdr;
+
+	union {
+		/*
+		 * Defines space needed for request
+		 */
+		u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];
+
+		/*
+		 * Initiator firmware responses
+		 */
+		struct fcpio_icmnd_cmpl         icmnd_cmpl;
+		struct fcpio_itmf_cmpl          itmf_cmpl;
+
+		/*
+		 * Target firmware new requests
+		 */
+		struct fcpio_tcmnd_16           tcmnd_16;
+		struct fcpio_tcmnd_32           tcmnd_32;
+
+		/*
+		 * Target firmware responses
+		 */
+		struct fcpio_tdrsp_cmpl         tdrsp_cmpl;
+		struct fcpio_ttmf               ttmf;
+		struct fcpio_tabort_cmpl        tabort_cmpl;
+
+		/*
+		 * Firmware response to work received
+		 */
+		struct fcpio_ack                ack;
+
+		/*
+		 * Misc requests
+		 */
+		struct fcpio_reset_cmpl         reset_cmpl;
+		struct fcpio_flogi_reg_cmpl     flogi_reg_cmpl;
+		struct fcpio_echo_cmpl          echo_cmpl;
+		struct fcpio_lunmap_chng        lunmap_chng;
+		struct fcpio_lunmap_req_cmpl    lunmap_req_cmpl;
+	} u;
+};
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the MSB of the structure
+ */
+static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
+{
+	u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+	if (color)
+		*c |= 0x80;
+	else
+		*c &= ~0x80;
+}
+
+static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color)
+{
+	u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+	*color = *c >> 7;
+
+	/*
+	 * Make sure color bit is read from desc *before* other fields
+	 * are read from desc.  Hardware guarantees color bit is last
+	 * bit (byte) written.  Adding the rmb() prevents the compiler
+	 * and/or CPU from reordering the reads which would potentially
+	 * result in reading stale values.
+	 */
+
+	rmb();
+
+}
+
+/*
+ * Lunmap table entry for scsi vnics
+ */
+#define FCPIO_LUNMAP_TABLE_SIZE     256
+#define FCPIO_FLAGS_LUNMAP_VALID    0x80
+#define FCPIO_FLAGS_BOOT            0x01
+struct fcpio_lunmap_entry {
+	u8    bus;
+	u8    target;
+	u8    lun;
+	u8    path_cnt;
+	u16   flags;
+	u16   update_cnt;
+};
+
+struct fcpio_lunmap_tbl {
+	u32                   update_cnt;
+	struct fcpio_lunmap_entry   lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
+};
+
+#endif /* _FCPIO_H_ */
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
new file mode 100644
index 00000000000..e4c0a3d7d87
--- /dev/null
+++ b/drivers/scsi/fnic/fnic.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_H_
+#define _FNIC_H_
+
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/workqueue.h>
+#include <scsi/libfc.h>
+#include "fnic_io.h"
+#include "fnic_res.h"
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_wq_copy.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "vnic_scsi.h"
+
+#define DRV_NAME		"fnic"
+#define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
+#define DRV_VERSION		"1.0.0.1121"
+#define PFX			DRV_NAME ": "
+#define DFX                     DRV_NAME "%d: "
+
+#define DESC_CLEAN_LOW_WATERMARK 8
+#define FNIC_MAX_IO_REQ		2048 /* scsi_cmnd tag map entries */
+#define	FNIC_IO_LOCKS		64 /* IO locks: power of 2 */
+#define FNIC_DFLT_QUEUE_DEPTH	32
+#define	FNIC_STATS_RATE_LIMIT	4 /* limit rate at which stats are pulled up */
+
+/*
+ * Tag bits used for special requests.
+ */
+#define BIT(nr)			(1UL << (nr))
+#define FNIC_TAG_ABORT		BIT(30)		/* tag bit indicating abort */
+#define FNIC_TAG_DEV_RST	BIT(29)		/* indicates device reset */
+#define FNIC_TAG_MASK		(BIT(24) - 1)	/* mask for lookup */
+#define FNIC_NO_TAG             -1
+
+/*
+ * Usage of the scsi_cmnd scratchpad.
+ * These fields are locked by the hashed io_req_lock.
+ */
+#define CMD_SP(Cmnd)		((Cmnd)->SCp.ptr)
+#define CMD_STATE(Cmnd)		((Cmnd)->SCp.phase)
+#define CMD_ABTS_STATUS(Cmnd)	((Cmnd)->SCp.Message)
+#define CMD_LR_STATUS(Cmnd)	((Cmnd)->SCp.have_data_in)
+#define CMD_TAG(Cmnd)           ((Cmnd)->SCp.sent_command)
+
+#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */
+
+#define FNIC_LUN_RESET_TIMEOUT	     10000	/* mSec */
+#define FNIC_HOST_RESET_TIMEOUT	     10000	/* mSec */
+#define FNIC_RMDEVICE_TIMEOUT        1000       /* mSec */
+#define FNIC_HOST_RESET_SETTLE_TIME  30         /* Sec */
+
+#define FNIC_MAX_FCP_TARGET     256
+
+extern unsigned int fnic_log_level;
+
+#define FNIC_MAIN_LOGGING 0x01
+#define FNIC_FCS_LOGGING 0x02
+#define FNIC_SCSI_LOGGING 0x04
+#define FNIC_ISR_LOGGING 0x08
+
+#define FNIC_CHECK_LOGGING(LEVEL, CMD)				\
+do {								\
+	if (unlikely(fnic_log_level & LEVEL))			\
+		do {						\
+			CMD;					\
+		} while (0);					\
+} while (0)
+
+#define FNIC_MAIN_DBG(kern_level, host, fmt, args...)		\
+	FNIC_CHECK_LOGGING(FNIC_MAIN_LOGGING,			\
+			 shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_FCS_DBG(kern_level, host, fmt, args...)		\
+	FNIC_CHECK_LOGGING(FNIC_FCS_LOGGING,			\
+			 shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_SCSI_DBG(kern_level, host, fmt, args...)		\
+	FNIC_CHECK_LOGGING(FNIC_SCSI_LOGGING,			\
+			 shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_ISR_DBG(kern_level, host, fmt, args...)		\
+	FNIC_CHECK_LOGGING(FNIC_ISR_LOGGING,			\
+			 shost_printk(kern_level, host, fmt, ##args);)
+
+extern const char *fnic_state_str[];
+
+enum fnic_intx_intr_index {
+	FNIC_INTX_WQ_RQ_COPYWQ,
+	FNIC_INTX_ERR,
+	FNIC_INTX_NOTIFY,
+	FNIC_INTX_INTR_MAX,
+};
+
+enum fnic_msix_intr_index {
+	FNIC_MSIX_RQ,
+	FNIC_MSIX_WQ,
+	FNIC_MSIX_WQ_COPY,
+	FNIC_MSIX_ERR_NOTIFY,
+	FNIC_MSIX_INTR_MAX,
+};
+
+struct fnic_msix_entry {
+	int requested;
+	char devname[IFNAMSIZ];
+	irqreturn_t (*isr)(int, void *);
+	void *devid;
+};
+
+enum fnic_state {
+	FNIC_IN_FC_MODE = 0,
+	FNIC_IN_FC_TRANS_ETH_MODE,
+	FNIC_IN_ETH_MODE,
+	FNIC_IN_ETH_TRANS_FC_MODE,
+};
+
+#define FNIC_WQ_COPY_MAX 1
+#define FNIC_WQ_MAX 1
+#define FNIC_RQ_MAX 1
+#define FNIC_CQ_MAX (FNIC_WQ_COPY_MAX + FNIC_WQ_MAX + FNIC_RQ_MAX)
+
+struct mempool;
+
+/* Per-instance private data structure */
+struct fnic {
+	struct fc_lport *lport;
+	struct vnic_dev_bar bar0;
+
+	struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX];
+	struct fnic_msix_entry msix[FNIC_MSIX_INTR_MAX];
+
+	struct vnic_stats *stats;
+	unsigned long stats_time;	/* time of stats update */
+	struct vnic_nic_cfg *nic_cfg;
+	char name[IFNAMSIZ];
+	struct timer_list notify_timer; /* used for MSI interrupts */
+
+	unsigned int err_intr_offset;
+	unsigned int link_intr_offset;
+
+	unsigned int wq_count;
+	unsigned int cq_count;
+
+	u32 fcoui_mode:1;		/* use fcoui address*/
+	u32 vlan_hw_insert:1;	        /* let hw insert the tag */
+	u32 in_remove:1;                /* fnic device in removal */
+	u32 stop_rx_link_events:1;      /* stop proc. rx frames, link events */
+
+	struct completion *remove_wait; /* device remove thread blocks */
+
+	struct fc_frame *flogi;
+	struct fc_frame *flogi_resp;
+	u16 flogi_oxid;
+	unsigned long s_id;
+	enum fnic_state state;
+	spinlock_t fnic_lock;
+
+	u16 vlan_id;	                /* VLAN tag including priority */
+	u8 mac_addr[ETH_ALEN];
+	u8 dest_addr[ETH_ALEN];
+	u8 data_src_addr[ETH_ALEN];
+	u64 fcp_input_bytes;		/* internal statistic */
+	u64 fcp_output_bytes;		/* internal statistic */
+	u32 link_down_cnt;
+	int link_status;
+
+	struct list_head list;
+	struct pci_dev *pdev;
+	struct vnic_fc_config config;
+	struct vnic_dev *vdev;
+	unsigned int raw_wq_count;
+	unsigned int wq_copy_count;
+	unsigned int rq_count;
+	int fw_ack_index[FNIC_WQ_COPY_MAX];
+	unsigned short fw_ack_recd[FNIC_WQ_COPY_MAX];
+	unsigned short wq_copy_desc_low[FNIC_WQ_COPY_MAX];
+	unsigned int intr_count;
+	u32 __iomem *legacy_pba;
+	struct fnic_host_tag *tags;
+	mempool_t *io_req_pool;
+	mempool_t *io_sgl_pool[FNIC_SGL_NUM_CACHES];
+	spinlock_t io_req_lock[FNIC_IO_LOCKS];	/* locks for scsi cmnds */
+
+	struct work_struct link_work;
+	struct work_struct frame_work;
+	struct sk_buff_head frame_queue;
+
+	/* copy work queue cache line section */
+	____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX];
+	/* completion queue cache line section */
+	____cacheline_aligned struct vnic_cq cq[FNIC_CQ_MAX];
+
+	spinlock_t wq_copy_lock[FNIC_WQ_COPY_MAX];
+
+	/* work queue cache line section */
+	____cacheline_aligned struct vnic_wq wq[FNIC_WQ_MAX];
+	spinlock_t wq_lock[FNIC_WQ_MAX];
+
+	/* receive queue cache line section */
+	____cacheline_aligned struct vnic_rq rq[FNIC_RQ_MAX];
+
+	/* interrupt resource cache line section */
+	____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX];
+};
+
+extern struct workqueue_struct *fnic_event_queue;
+extern struct device_attribute *fnic_attrs[];
+
+void fnic_clear_intr_mode(struct fnic *fnic);
+int fnic_set_intr_mode(struct fnic *fnic);
+void fnic_free_intr(struct fnic *fnic);
+int fnic_request_intr(struct fnic *fnic);
+
+int fnic_send(struct fc_lport *, struct fc_frame *);
+void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf);
+void fnic_handle_frame(struct work_struct *work);
+void fnic_handle_link(struct work_struct *work);
+int fnic_rq_cmpl_handler(struct fnic *fnic, int);
+int fnic_alloc_rq_frame(struct vnic_rq *rq);
+void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf);
+int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp);
+
+int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+int fnic_abort_cmd(struct scsi_cmnd *);
+int fnic_device_reset(struct scsi_cmnd *);
+int fnic_host_reset(struct scsi_cmnd *);
+int fnic_reset(struct Scsi_Host *);
+void fnic_scsi_cleanup(struct fc_lport *);
+void fnic_scsi_abort_io(struct fc_lport *);
+void fnic_empty_scsi_cleanup(struct fc_lport *);
+void fnic_exch_mgr_reset(struct fc_lport *, u32, u32);
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int);
+int fnic_wq_cmpl_handler(struct fnic *fnic, int);
+int fnic_flogi_reg_handler(struct fnic *fnic);
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+				  struct fcpio_host_req *desc);
+int fnic_fw_reset_handler(struct fnic *fnic);
+void fnic_terminate_rport_io(struct fc_rport *);
+const char *fnic_state_to_str(unsigned int state);
+
+void fnic_log_q_error(struct fnic *fnic);
+void fnic_handle_link_event(struct fnic *fnic);
+
+#endif /* _FNIC_H_ */
diff --git a/drivers/scsi/fnic/fnic_attrs.c b/drivers/scsi/fnic/fnic_attrs.c
new file mode 100644
index 00000000000..aea0c3becfd
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_attrs.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/string.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include "fnic.h"
+
+static ssize_t fnic_show_state(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct fc_lport *lp = shost_priv(class_to_shost(dev));
+	struct fnic *fnic = lport_priv(lp);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", fnic_state_str[fnic->state]);
+}
+
+static ssize_t fnic_show_drv_version(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", DRV_VERSION);
+}
+
+static ssize_t fnic_show_link_state(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct fc_lport *lp = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", (lp->link_up)
+			? "Link Up" : "Link Down");
+}
+
+static DEVICE_ATTR(fnic_state, S_IRUGO, fnic_show_state, NULL);
+static DEVICE_ATTR(drv_version, S_IRUGO, fnic_show_drv_version, NULL);
+static DEVICE_ATTR(link_state, S_IRUGO, fnic_show_link_state, NULL);
+
+struct device_attribute *fnic_attrs[] = {
+	&dev_attr_fnic_state,
+	&dev_attr_drv_version,
+	&dev_attr_link_state,
+	NULL,
+};
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
new file mode 100644
index 00000000000..07e6eedb83c
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -0,0 +1,742 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/fc_frame.h>
+#include <scsi/libfc.h>
+#include "fnic_io.h"
+#include "fnic.h"
+#include "cq_enet_desc.h"
+#include "cq_exch_desc.h"
+
+struct workqueue_struct *fnic_event_queue;
+
+void fnic_handle_link(struct work_struct *work)
+{
+	struct fnic *fnic = container_of(work, struct fnic, link_work);
+	unsigned long flags;
+	int old_link_status;
+	u32 old_link_down_cnt;
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+	if (fnic->stop_rx_link_events) {
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		return;
+	}
+
+	old_link_down_cnt = fnic->link_down_cnt;
+	old_link_status = fnic->link_status;
+	fnic->link_status = vnic_dev_link_status(fnic->vdev);
+	fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev);
+
+	if (old_link_status == fnic->link_status) {
+		if (!fnic->link_status)
+			/* DOWN -> DOWN */
+			spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		else {
+			if (old_link_down_cnt != fnic->link_down_cnt) {
+				/* UP -> DOWN -> UP */
+				fnic->lport->host_stats.link_failure_count++;
+				spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+				FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+					     "link down\n");
+				fc_linkdown(fnic->lport);
+				FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+					     "link up\n");
+				fc_linkup(fnic->lport);
+			} else
+				/* UP -> UP */
+				spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		}
+	} else if (fnic->link_status) {
+		/* DOWN -> UP */
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n");
+		fc_linkup(fnic->lport);
+	} else {
+		/* UP -> DOWN */
+		fnic->lport->host_stats.link_failure_count++;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n");
+		fc_linkdown(fnic->lport);
+	}
+
+}
+
+/*
+ * This function passes incoming fabric frames to libFC
+ */
+void fnic_handle_frame(struct work_struct *work)
+{
+	struct fnic *fnic = container_of(work, struct fnic, frame_work);
+	struct fc_lport *lp = fnic->lport;
+	unsigned long flags;
+	struct sk_buff *skb;
+	struct fc_frame *fp;
+
+	while ((skb = skb_dequeue(&fnic->frame_queue))) {
+
+		spin_lock_irqsave(&fnic->fnic_lock, flags);
+		if (fnic->stop_rx_link_events) {
+			spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+			dev_kfree_skb(skb);
+			return;
+		}
+		fp = (struct fc_frame *)skb;
+		/* if Flogi resp frame, register the address */
+		if (fr_flags(fp)) {
+			vnic_dev_add_addr(fnic->vdev,
+					  fnic->data_src_addr);
+			fr_flags(fp) = 0;
+		}
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+		fc_exch_recv(lp, lp->emp, fp);
+	}
+
+}
+
+static inline void fnic_import_rq_fc_frame(struct sk_buff *skb,
+					   u32 len, u8 sof, u8 eof)
+{
+	struct fc_frame *fp = (struct fc_frame *)skb;
+
+	skb_trim(skb, len);
+	fr_eof(fp) = eof;
+	fr_sof(fp) = sof;
+}
+
+
+static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len)
+{
+	struct fc_frame *fp;
+	struct ethhdr *eh;
+	struct vlan_ethhdr *vh;
+	struct fcoe_hdr *fcoe_hdr;
+	struct fcoe_crc_eof *ft;
+	u32    transport_len = 0;
+
+	eh = (struct ethhdr *)skb->data;
+	vh = (struct vlan_ethhdr *)skb->data;
+	if (vh->h_vlan_proto == htons(ETH_P_8021Q) &&
+	    vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) {
+		skb_pull(skb, sizeof(struct vlan_ethhdr));
+		transport_len += sizeof(struct vlan_ethhdr);
+	} else if (eh->h_proto == htons(ETH_P_FCOE)) {
+		transport_len += sizeof(struct ethhdr);
+		skb_pull(skb, sizeof(struct ethhdr));
+	} else
+		return -1;
+
+	fcoe_hdr = (struct fcoe_hdr *)skb->data;
+	if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER)
+		return -1;
+
+	fp = (struct fc_frame *)skb;
+	fc_frame_init(fp);
+	fr_sof(fp) = fcoe_hdr->fcoe_sof;
+	skb_pull(skb, sizeof(struct fcoe_hdr));
+	transport_len += sizeof(struct fcoe_hdr);
+
+	ft = (struct fcoe_crc_eof *)(skb->data + len -
+				     transport_len - sizeof(*ft));
+	fr_eof(fp) = ft->fcoe_eof;
+	skb_trim(skb, len - transport_len - sizeof(*ft));
+	return 0;
+}
+
+static inline int fnic_handle_flogi_resp(struct fnic *fnic,
+					 struct fc_frame *fp)
+{
+	u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC;
+	struct ethhdr *eth_hdr;
+	struct fc_frame_header *fh;
+	int ret = 0;
+	unsigned long flags;
+	struct fc_frame *old_flogi_resp = NULL;
+
+	fh = (struct fc_frame_header *)fr_hdr(fp);
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+	if (fnic->state == FNIC_IN_ETH_MODE) {
+
+		/*
+		 * Check if oxid matches on taking the lock. A new Flogi
+		 * issued by libFC might have changed the fnic cached oxid
+		 */
+		if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) {
+			FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+				     "Flogi response oxid not"
+				     " matching cached oxid, dropping frame"
+				     "\n");
+			ret = -1;
+			spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+			dev_kfree_skb_irq(fp_skb(fp));
+			goto handle_flogi_resp_end;
+		}
+
+		/* Drop older cached flogi response frame, cache this frame */
+		old_flogi_resp = fnic->flogi_resp;
+		fnic->flogi_resp = fp;
+		fnic->flogi_oxid = FC_XID_UNKNOWN;
+
+		/*
+		 * this frame is part of flogi get the src mac addr from this
+		 * frame if the src mac is fcoui based then we mark the
+		 * address mode flag to use fcoui base for dst mac addr
+		 * otherwise we have to store the fcoe gateway addr
+		 */
+		eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp));
+		memcpy(mac, eth_hdr->h_source, ETH_ALEN);
+
+		if (ntoh24(mac) == FC_FCOE_OUI)
+			fnic->fcoui_mode = 1;
+		else {
+			fnic->fcoui_mode = 0;
+			memcpy(fnic->dest_addr, mac, ETH_ALEN);
+		}
+
+		/*
+		 * Except for Flogi frame, all outbound frames from us have the
+		 * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses
+		 * the vnic MAC address as the Eth Src address
+		 */
+		fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id);
+
+		/* We get our s_id from the d_id of the flogi resp frame */
+		fnic->s_id = ntoh24(fh->fh_d_id);
+
+		/* Change state to reflect transition from Eth to FC mode */
+		fnic->state = FNIC_IN_ETH_TRANS_FC_MODE;
+
+	} else {
+		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+			     "Unexpected fnic state %s while"
+			     " processing flogi resp\n",
+			     fnic_state_to_str(fnic->state));
+		ret = -1;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		dev_kfree_skb_irq(fp_skb(fp));
+		goto handle_flogi_resp_end;
+	}
+
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	/* Drop older cached frame */
+	if (old_flogi_resp)
+		dev_kfree_skb_irq(fp_skb(old_flogi_resp));
+
+	/*
+	 * send flogi reg request to firmware, this will put the fnic in
+	 * in FC mode
+	 */
+	ret = fnic_flogi_reg_handler(fnic);
+
+	if (ret < 0) {
+		int free_fp = 1;
+		spin_lock_irqsave(&fnic->fnic_lock, flags);
+		/*
+		 * free the frame is some other thread is not
+		 * pointing to it
+		 */
+		if (fnic->flogi_resp != fp)
+			free_fp = 0;
+		else
+			fnic->flogi_resp = NULL;
+
+		if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE)
+			fnic->state = FNIC_IN_ETH_MODE;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		if (free_fp)
+			dev_kfree_skb_irq(fp_skb(fp));
+	}
+
+ handle_flogi_resp_end:
+	return ret;
+}
+
+/* Returns 1 for a response that matches cached flogi oxid */
+static inline int is_matching_flogi_resp_frame(struct fnic *fnic,
+					       struct fc_frame *fp)
+{
+	struct fc_frame_header *fh;
+	int ret = 0;
+	u32 f_ctl;
+
+	fh = fc_frame_header_get(fp);
+	f_ctl = ntoh24(fh->fh_f_ctl);
+
+	if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) &&
+	    fh->fh_r_ctl == FC_RCTL_ELS_REP &&
+	    (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX &&
+	    fh->fh_type == FC_TYPE_ELS)
+		ret = 1;
+
+	return ret;
+}
+
+static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc
+				    *cq_desc, struct vnic_rq_buf *buf,
+				    int skipped __attribute__((unused)),
+				    void *opaque)
+{
+	struct fnic *fnic = vnic_dev_priv(rq->vdev);
+	struct sk_buff *skb;
+	struct fc_frame *fp;
+	unsigned int eth_hdrs_stripped;
+	u8 type, color, eop, sop, ingress_port, vlan_stripped;
+	u8 fcoe = 0, fcoe_sof, fcoe_eof;
+	u8 fcoe_fc_crc_ok = 1, fcoe_enc_error = 0;
+	u8 tcp_udp_csum_ok, udp, tcp, ipv4_csum_ok;
+	u8 ipv6, ipv4, ipv4_fragment, rss_type, csum_not_calc;
+	u8 fcs_ok = 1, packet_error = 0;
+	u16 q_number, completed_index, bytes_written = 0, vlan, checksum;
+	u32 rss_hash;
+	u16 exchange_id, tmpl;
+	u8 sof = 0;
+	u8 eof = 0;
+	u32 fcp_bytes_written = 0;
+	unsigned long flags;
+
+	pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
+			 PCI_DMA_FROMDEVICE);
+	skb = buf->os_buf;
+	buf->os_buf = NULL;
+
+	cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index);
+	if (type == CQ_DESC_TYPE_RQ_FCP) {
+		cq_fcp_rq_desc_dec((struct cq_fcp_rq_desc *)cq_desc,
+				   &type, &color, &q_number, &completed_index,
+				   &eop, &sop, &fcoe_fc_crc_ok, &exchange_id,
+				   &tmpl, &fcp_bytes_written, &sof, &eof,
+				   &ingress_port, &packet_error,
+				   &fcoe_enc_error, &fcs_ok, &vlan_stripped,
+				   &vlan);
+		eth_hdrs_stripped = 1;
+
+	} else if (type == CQ_DESC_TYPE_RQ_ENET) {
+		cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc,
+				    &type, &color, &q_number, &completed_index,
+				    &ingress_port, &fcoe, &eop, &sop,
+				    &rss_type, &csum_not_calc, &rss_hash,
+				    &bytes_written, &packet_error,
+				    &vlan_stripped, &vlan, &checksum,
+				    &fcoe_sof, &fcoe_fc_crc_ok,
+				    &fcoe_enc_error, &fcoe_eof,
+				    &tcp_udp_csum_ok, &udp, &tcp,
+				    &ipv4_csum_ok, &ipv6, &ipv4,
+				    &ipv4_fragment, &fcs_ok);
+		eth_hdrs_stripped = 0;
+
+	} else {
+		/* wrong CQ type*/
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "fnic rq_cmpl wrong cq type x%x\n", type);
+		goto drop;
+	}
+
+	if (!fcs_ok || packet_error || !fcoe_fc_crc_ok || fcoe_enc_error) {
+		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+			     "fnic rq_cmpl fcoe x%x fcsok x%x"
+			     " pkterr x%x fcoe_fc_crc_ok x%x, fcoe_enc_err"
+			     " x%x\n",
+			     fcoe, fcs_ok, packet_error,
+			     fcoe_fc_crc_ok, fcoe_enc_error);
+		goto drop;
+	}
+
+	if (eth_hdrs_stripped)
+		fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof);
+	else if (fnic_import_rq_eth_pkt(skb, bytes_written))
+		goto drop;
+
+	fp = (struct fc_frame *)skb;
+
+	/*
+	 * If frame is an ELS response that matches the cached FLOGI OX_ID,
+	 * and is accept, issue flogi_reg_request copy wq request to firmware
+	 * to register the S_ID and determine whether FC_OUI mode or GW mode.
+	 */
+	if (is_matching_flogi_resp_frame(fnic, fp)) {
+		if (!eth_hdrs_stripped) {
+			if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
+				fnic_handle_flogi_resp(fnic, fp);
+				return;
+			}
+			/*
+			 * Recd. Flogi reject. No point registering
+			 * with fw, but forward to libFC
+			 */
+			goto forward;
+		}
+		goto drop;
+	}
+	if (!eth_hdrs_stripped)
+		goto drop;
+
+forward:
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	if (fnic->stop_rx_link_events) {
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		goto drop;
+	}
+	/* Use fr_flags to indicate whether succ. flogi resp or not */
+	fr_flags(fp) = 0;
+	fr_dev(fp) = fnic->lport;
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	skb_queue_tail(&fnic->frame_queue, skb);
+	queue_work(fnic_event_queue, &fnic->frame_work);
+
+	return;
+drop:
+	dev_kfree_skb_irq(skb);
+}
+
+static int fnic_rq_cmpl_handler_cont(struct vnic_dev *vdev,
+				     struct cq_desc *cq_desc, u8 type,
+				     u16 q_number, u16 completed_index,
+				     void *opaque)
+{
+	struct fnic *fnic = vnic_dev_priv(vdev);
+
+	vnic_rq_service(&fnic->rq[q_number], cq_desc, completed_index,
+			VNIC_RQ_RETURN_DESC, fnic_rq_cmpl_frame_recv,
+			NULL);
+	return 0;
+}
+
+int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do)
+{
+	unsigned int tot_rq_work_done = 0, cur_work_done;
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < fnic->rq_count; i++) {
+		cur_work_done = vnic_cq_service(&fnic->cq[i], rq_work_to_do,
+						fnic_rq_cmpl_handler_cont,
+						NULL);
+		if (cur_work_done) {
+			err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
+			if (err)
+				shost_printk(KERN_ERR, fnic->lport->host,
+					     "fnic_alloc_rq_frame cant alloc"
+					     " frame\n");
+		}
+		tot_rq_work_done += cur_work_done;
+	}
+
+	return tot_rq_work_done;
+}
+
+/*
+ * This function is called once at init time to allocate and fill RQ
+ * buffers. Subsequently, it is called in the interrupt context after RQ
+ * buffer processing to replenish the buffers in the RQ
+ */
+int fnic_alloc_rq_frame(struct vnic_rq *rq)
+{
+	struct fnic *fnic = vnic_dev_priv(rq->vdev);
+	struct sk_buff *skb;
+	u16 len;
+	dma_addr_t pa;
+
+	len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM;
+	skb = dev_alloc_skb(len);
+	if (!skb) {
+		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+			     "Unable to allocate RQ sk_buff\n");
+		return -ENOMEM;
+	}
+	skb_reset_mac_header(skb);
+	skb_reset_transport_header(skb);
+	skb_reset_network_header(skb);
+	skb_put(skb, len);
+	pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE);
+	fnic_queue_rq_desc(rq, skb, pa, len);
+	return 0;
+}
+
+void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf)
+{
+	struct fc_frame *fp = buf->os_buf;
+	struct fnic *fnic = vnic_dev_priv(rq->vdev);
+
+	pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
+			 PCI_DMA_FROMDEVICE);
+
+	dev_kfree_skb(fp_skb(fp));
+	buf->os_buf = NULL;
+}
+
+static inline int is_flogi_frame(struct fc_frame_header *fh)
+{
+	return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI;
+}
+
+int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
+{
+	struct vnic_wq *wq = &fnic->wq[0];
+	struct sk_buff *skb;
+	dma_addr_t pa;
+	struct ethhdr *eth_hdr;
+	struct vlan_ethhdr *vlan_hdr;
+	struct fcoe_hdr *fcoe_hdr;
+	struct fc_frame_header *fh;
+	u32 tot_len, eth_hdr_len;
+	int ret = 0;
+	unsigned long flags;
+
+	fh = fc_frame_header_get(fp);
+	skb = fp_skb(fp);
+
+	if (!fnic->vlan_hw_insert) {
+		eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr);
+		vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len);
+		eth_hdr = (struct ethhdr *)vlan_hdr;
+		vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
+		vlan_hdr->h_vlan_encapsulated_proto = htons(ETH_P_FCOE);
+		vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id);
+		fcoe_hdr = (struct fcoe_hdr *)(vlan_hdr + 1);
+	} else {
+		eth_hdr_len = sizeof(*eth_hdr) + sizeof(*fcoe_hdr);
+		eth_hdr = (struct ethhdr *)skb_push(skb, eth_hdr_len);
+		eth_hdr->h_proto = htons(ETH_P_FCOE);
+		fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1);
+	}
+
+	if (is_flogi_frame(fh)) {
+		fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
+		memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN);
+	} else {
+		if (fnic->fcoui_mode)
+			fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
+		else
+			memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN);
+		memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN);
+	}
+
+	tot_len = skb->len;
+	BUG_ON(tot_len % 4);
+
+	memset(fcoe_hdr, 0, sizeof(*fcoe_hdr));
+	fcoe_hdr->fcoe_sof = fr_sof(fp);
+	if (FC_FCOE_VER)
+		FC_FCOE_ENCAPS_VER(fcoe_hdr, FC_FCOE_VER);
+
+	pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE);
+
+	spin_lock_irqsave(&fnic->wq_lock[0], flags);
+
+	if (!vnic_wq_desc_avail(wq)) {
+		pci_unmap_single(fnic->pdev, pa,
+				 tot_len, PCI_DMA_TODEVICE);
+		ret = -1;
+		goto fnic_send_frame_end;
+	}
+
+	fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp),
+			   fnic->vlan_hw_insert, fnic->vlan_id, 1, 1, 1);
+fnic_send_frame_end:
+	spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
+
+	if (ret)
+		dev_kfree_skb_any(fp_skb(fp));
+
+	return ret;
+}
+
+/*
+ * fnic_send
+ * Routine to send a raw frame
+ */
+int fnic_send(struct fc_lport *lp, struct fc_frame *fp)
+{
+	struct fnic *fnic = lport_priv(lp);
+	struct fc_frame_header *fh;
+	int ret = 0;
+	enum fnic_state old_state;
+	unsigned long flags;
+	struct fc_frame *old_flogi = NULL;
+	struct fc_frame *old_flogi_resp = NULL;
+
+	if (fnic->in_remove) {
+		dev_kfree_skb(fp_skb(fp));
+		ret = -1;
+		goto fnic_send_end;
+	}
+
+	fh = fc_frame_header_get(fp);
+	/* if not an Flogi frame, send it out, this is the common case */
+	if (!is_flogi_frame(fh))
+		return fnic_send_frame(fnic, fp);
+
+	/* Flogi frame, now enter the state machine */
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+again:
+	/* Get any old cached frames, free them after dropping lock */
+	old_flogi = fnic->flogi;
+	fnic->flogi = NULL;
+	old_flogi_resp = fnic->flogi_resp;
+	fnic->flogi_resp = NULL;
+
+	fnic->flogi_oxid = FC_XID_UNKNOWN;
+
+	old_state = fnic->state;
+	switch (old_state) {
+	case FNIC_IN_FC_MODE:
+	case FNIC_IN_ETH_TRANS_FC_MODE:
+	default:
+		fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+		vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+		if (old_flogi) {
+			dev_kfree_skb(fp_skb(old_flogi));
+			old_flogi = NULL;
+		}
+		if (old_flogi_resp) {
+			dev_kfree_skb(fp_skb(old_flogi_resp));
+			old_flogi_resp = NULL;
+		}
+
+		ret = fnic_fw_reset_handler(fnic);
+
+		spin_lock_irqsave(&fnic->fnic_lock, flags);
+		if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE)
+			goto again;
+		if (ret) {
+			fnic->state = old_state;
+			spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+			dev_kfree_skb(fp_skb(fp));
+			goto fnic_send_end;
+		}
+		old_flogi = fnic->flogi;
+		fnic->flogi = fp;
+		fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+		old_flogi_resp = fnic->flogi_resp;
+		fnic->flogi_resp = NULL;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		break;
+
+	case FNIC_IN_FC_TRANS_ETH_MODE:
+		/*
+		 * A reset is pending with the firmware. Store the flogi
+		 * and its oxid. The transition out of this state happens
+		 * only when Firmware completes the reset, either with
+		 * success or failed. If success, transition to
+		 * FNIC_IN_ETH_MODE, if fail, then transition to
+		 * FNIC_IN_FC_MODE
+		 */
+		fnic->flogi = fp;
+		fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		break;
+
+	case FNIC_IN_ETH_MODE:
+		/*
+		 * The fw/hw is already in eth mode. Store the oxid,
+		 * and send the flogi frame out. The transition out of this
+		 * state happens only we receive flogi response from the
+		 * network, and the oxid matches the cached oxid when the
+		 * flogi frame was sent out. If they match, then we issue
+		 * a flogi_reg request and transition to state
+		 * FNIC_IN_ETH_TRANS_FC_MODE
+		 */
+		fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		ret = fnic_send_frame(fnic, fp);
+		break;
+	}
+
+fnic_send_end:
+	if (old_flogi)
+		dev_kfree_skb(fp_skb(old_flogi));
+	if (old_flogi_resp)
+		dev_kfree_skb(fp_skb(old_flogi_resp));
+	return ret;
+}
+
+static void fnic_wq_complete_frame_send(struct vnic_wq *wq,
+					struct cq_desc *cq_desc,
+					struct vnic_wq_buf *buf, void *opaque)
+{
+	struct sk_buff *skb = buf->os_buf;
+	struct fc_frame *fp = (struct fc_frame *)skb;
+	struct fnic *fnic = vnic_dev_priv(wq->vdev);
+
+	pci_unmap_single(fnic->pdev, buf->dma_addr,
+			 buf->len, PCI_DMA_TODEVICE);
+	dev_kfree_skb_irq(fp_skb(fp));
+	buf->os_buf = NULL;
+}
+
+static int fnic_wq_cmpl_handler_cont(struct vnic_dev *vdev,
+				     struct cq_desc *cq_desc, u8 type,
+				     u16 q_number, u16 completed_index,
+				     void *opaque)
+{
+	struct fnic *fnic = vnic_dev_priv(vdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fnic->wq_lock[q_number], flags);
+	vnic_wq_service(&fnic->wq[q_number], cq_desc, completed_index,
+			fnic_wq_complete_frame_send, NULL);
+	spin_unlock_irqrestore(&fnic->wq_lock[q_number], flags);
+
+	return 0;
+}
+
+int fnic_wq_cmpl_handler(struct fnic *fnic, int work_to_do)
+{
+	unsigned int wq_work_done = 0;
+	unsigned int i;
+
+	for (i = 0; i < fnic->raw_wq_count; i++) {
+		wq_work_done  += vnic_cq_service(&fnic->cq[fnic->rq_count+i],
+						 work_to_do,
+						 fnic_wq_cmpl_handler_cont,
+						 NULL);
+	}
+
+	return wq_work_done;
+}
+
+
+void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf)
+{
+	struct fc_frame *fp = buf->os_buf;
+	struct fnic *fnic = vnic_dev_priv(wq->vdev);
+
+	pci_unmap_single(fnic->pdev, buf->dma_addr,
+			 buf->len, PCI_DMA_TODEVICE);
+
+	dev_kfree_skb(fp_skb(fp));
+	buf->os_buf = NULL;
+}
diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h
new file mode 100644
index 00000000000..f0b896988cd
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_io.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_IO_H_
+#define _FNIC_IO_H_
+
+#include <scsi/fc/fc_fcp.h>
+
+#define FNIC_DFLT_SG_DESC_CNT  32
+#define FNIC_MAX_SG_DESC_CNT        1024    /* Maximum descriptors per sgl */
+#define FNIC_SG_DESC_ALIGN          16      /* Descriptor address alignment */
+
+struct host_sg_desc {
+	__le64 addr;
+	__le32 len;
+	u32 _resvd;
+};
+
+struct fnic_dflt_sgl_list {
+	struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT];
+};
+
+struct fnic_sgl_list {
+	struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT];
+};
+
+enum fnic_sgl_list_type {
+	FNIC_SGL_CACHE_DFLT = 0,  /* cache with default size sgl */
+	FNIC_SGL_CACHE_MAX,       /* cache with max size sgl */
+	FNIC_SGL_NUM_CACHES       /* number of sgl caches */
+};
+
+enum fnic_ioreq_state {
+	FNIC_IOREQ_CMD_PENDING = 0,
+	FNIC_IOREQ_ABTS_PENDING,
+	FNIC_IOREQ_ABTS_COMPLETE,
+	FNIC_IOREQ_CMD_COMPLETE,
+};
+
+struct fnic_io_req {
+	struct host_sg_desc *sgl_list; /* sgl list */
+	void *sgl_list_alloc; /* sgl list address used for free */
+	dma_addr_t sense_buf_pa; /* dma address for sense buffer*/
+	dma_addr_t sgl_list_pa;	/* dma address for sgl list */
+	u16 sgl_cnt;
+	u8 sgl_type; /* device DMA descriptor list type */
+	u8 io_completed:1; /* set to 1 when fw completes IO */
+	u32 port_id; /* remote port DID */
+	struct completion *abts_done; /* completion for abts */
+	struct completion *dr_done; /* completion for device reset */
+};
+
+#endif /* _FNIC_IO_H_ */
diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c
new file mode 100644
index 00000000000..2b3064828ae
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_isr.c
@@ -0,0 +1,332 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "fnic_io.h"
+#include "fnic.h"
+
+static irqreturn_t fnic_isr_legacy(int irq, void *data)
+{
+	struct fnic *fnic = data;
+	u32 pba;
+	unsigned long work_done = 0;
+
+	pba = vnic_intr_legacy_pba(fnic->legacy_pba);
+	if (!pba)
+		return IRQ_NONE;
+
+	if (pba & (1 << FNIC_INTX_NOTIFY)) {
+		vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_NOTIFY]);
+		fnic_handle_link_event(fnic);
+	}
+
+	if (pba & (1 << FNIC_INTX_ERR)) {
+		vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_ERR]);
+		fnic_log_q_error(fnic);
+	}
+
+	if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) {
+		work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
+		work_done += fnic_wq_cmpl_handler(fnic, 4);
+		work_done += fnic_rq_cmpl_handler(fnic, 4);
+
+		vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ],
+					 work_done,
+					 1 /* unmask intr */,
+					 1 /* reset intr timer */);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msi(int irq, void *data)
+{
+	struct fnic *fnic = data;
+	unsigned long work_done = 0;
+
+	work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
+	work_done += fnic_wq_cmpl_handler(fnic, 4);
+	work_done += fnic_rq_cmpl_handler(fnic, 4);
+
+	vnic_intr_return_credits(&fnic->intr[0],
+				 work_done,
+				 1 /* unmask intr */,
+				 1 /* reset intr timer */);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_rq(int irq, void *data)
+{
+	struct fnic *fnic = data;
+	unsigned long rq_work_done = 0;
+
+	rq_work_done = fnic_rq_cmpl_handler(fnic, 4);
+	vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ],
+				 rq_work_done,
+				 1 /* unmask intr */,
+				 1 /* reset intr timer */);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_wq(int irq, void *data)
+{
+	struct fnic *fnic = data;
+	unsigned long wq_work_done = 0;
+
+	wq_work_done = fnic_wq_cmpl_handler(fnic, 4);
+	vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ],
+				 wq_work_done,
+				 1 /* unmask intr */,
+				 1 /* reset intr timer */);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_wq_copy(int irq, void *data)
+{
+	struct fnic *fnic = data;
+	unsigned long wq_copy_work_done = 0;
+
+	wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8);
+	vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY],
+				 wq_copy_work_done,
+				 1 /* unmask intr */,
+				 1 /* reset intr timer */);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_err_notify(int irq, void *data)
+{
+	struct fnic *fnic = data;
+
+	vnic_intr_return_all_credits(&fnic->intr[FNIC_MSIX_ERR_NOTIFY]);
+	fnic_log_q_error(fnic);
+	fnic_handle_link_event(fnic);
+
+	return IRQ_HANDLED;
+}
+
+void fnic_free_intr(struct fnic *fnic)
+{
+	int i;
+
+	switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+	case VNIC_DEV_INTR_MODE_INTX:
+	case VNIC_DEV_INTR_MODE_MSI:
+		free_irq(fnic->pdev->irq, fnic);
+		break;
+
+	case VNIC_DEV_INTR_MODE_MSIX:
+		for (i = 0; i < ARRAY_SIZE(fnic->msix); i++)
+			if (fnic->msix[i].requested)
+				free_irq(fnic->msix_entry[i].vector,
+					 fnic->msix[i].devid);
+		break;
+
+	default:
+		break;
+	}
+}
+
+int fnic_request_intr(struct fnic *fnic)
+{
+	int err = 0;
+	int i;
+
+	switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+
+	case VNIC_DEV_INTR_MODE_INTX:
+		err = request_irq(fnic->pdev->irq, &fnic_isr_legacy,
+				  IRQF_SHARED, DRV_NAME, fnic);
+		break;
+
+	case VNIC_DEV_INTR_MODE_MSI:
+		err = request_irq(fnic->pdev->irq, &fnic_isr_msi,
+				  0, fnic->name, fnic);
+		break;
+
+	case VNIC_DEV_INTR_MODE_MSIX:
+
+		sprintf(fnic->msix[FNIC_MSIX_RQ].devname,
+			"%.11s-fcs-rq", fnic->name);
+		fnic->msix[FNIC_MSIX_RQ].isr = fnic_isr_msix_rq;
+		fnic->msix[FNIC_MSIX_RQ].devid = fnic;
+
+		sprintf(fnic->msix[FNIC_MSIX_WQ].devname,
+			"%.11s-fcs-wq", fnic->name);
+		fnic->msix[FNIC_MSIX_WQ].isr = fnic_isr_msix_wq;
+		fnic->msix[FNIC_MSIX_WQ].devid = fnic;
+
+		sprintf(fnic->msix[FNIC_MSIX_WQ_COPY].devname,
+			"%.11s-scsi-wq", fnic->name);
+		fnic->msix[FNIC_MSIX_WQ_COPY].isr = fnic_isr_msix_wq_copy;
+		fnic->msix[FNIC_MSIX_WQ_COPY].devid = fnic;
+
+		sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname,
+			"%.11s-err-notify", fnic->name);
+		fnic->msix[FNIC_MSIX_ERR_NOTIFY].isr =
+			fnic_isr_msix_err_notify;
+		fnic->msix[FNIC_MSIX_ERR_NOTIFY].devid = fnic;
+
+		for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) {
+			err = request_irq(fnic->msix_entry[i].vector,
+					  fnic->msix[i].isr, 0,
+					  fnic->msix[i].devname,
+					  fnic->msix[i].devid);
+			if (err) {
+				shost_printk(KERN_ERR, fnic->lport->host,
+					     "MSIX: request_irq"
+					     " failed %d\n", err);
+				fnic_free_intr(fnic);
+				break;
+			}
+			fnic->msix[i].requested = 1;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return err;
+}
+
+int fnic_set_intr_mode(struct fnic *fnic)
+{
+	unsigned int n = ARRAY_SIZE(fnic->rq);
+	unsigned int m = ARRAY_SIZE(fnic->wq);
+	unsigned int o = ARRAY_SIZE(fnic->wq_copy);
+	unsigned int i;
+
+	/*
+	 * Set interrupt mode (INTx, MSI, MSI-X) depending
+	 * system capabilities.
+	 *
+	 * Try MSI-X first
+	 *
+	 * We need n RQs, m WQs, o Copy WQs, n+m+o CQs, and n+m+o+1 INTRs
+	 * (last INTR is used for WQ/RQ errors and notification area)
+	 */
+
+	BUG_ON(ARRAY_SIZE(fnic->msix_entry) < n + m + o + 1);
+	for (i = 0; i < n + m + o + 1; i++)
+		fnic->msix_entry[i].entry = i;
+
+	if (fnic->rq_count >= n &&
+	    fnic->raw_wq_count >= m &&
+	    fnic->wq_copy_count >= o &&
+	    fnic->cq_count >= n + m + o) {
+		if (!pci_enable_msix(fnic->pdev, fnic->msix_entry,
+				    n + m + o + 1)) {
+			fnic->rq_count = n;
+			fnic->raw_wq_count = m;
+			fnic->wq_copy_count = o;
+			fnic->wq_count = m + o;
+			fnic->cq_count = n + m + o;
+			fnic->intr_count = n + m + o + 1;
+			fnic->err_intr_offset = FNIC_MSIX_ERR_NOTIFY;
+
+			FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+				     "Using MSI-X Interrupts\n");
+			vnic_dev_set_intr_mode(fnic->vdev,
+					       VNIC_DEV_INTR_MODE_MSIX);
+			return 0;
+		}
+	}
+
+	/*
+	 * Next try MSI
+	 * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 1 INTR
+	 */
+	if (fnic->rq_count >= 1 &&
+	    fnic->raw_wq_count >= 1 &&
+	    fnic->wq_copy_count >= 1 &&
+	    fnic->cq_count >= 3 &&
+	    fnic->intr_count >= 1 &&
+	    !pci_enable_msi(fnic->pdev)) {
+
+		fnic->rq_count = 1;
+		fnic->raw_wq_count = 1;
+		fnic->wq_copy_count = 1;
+		fnic->wq_count = 2;
+		fnic->cq_count = 3;
+		fnic->intr_count = 1;
+		fnic->err_intr_offset = 0;
+
+		FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+			     "Using MSI Interrupts\n");
+		vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_MSI);
+
+		return 0;
+	}
+
+	/*
+	 * Next try INTx
+	 * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 3 INTRs
+	 * 1 INTR is used for all 3 queues, 1 INTR for queue errors
+	 * 1 INTR for notification area
+	 */
+
+	if (fnic->rq_count >= 1 &&
+	    fnic->raw_wq_count >= 1 &&
+	    fnic->wq_copy_count >= 1 &&
+	    fnic->cq_count >= 3 &&
+	    fnic->intr_count >= 3) {
+
+		fnic->rq_count = 1;
+		fnic->raw_wq_count = 1;
+		fnic->wq_copy_count = 1;
+		fnic->cq_count = 3;
+		fnic->intr_count = 3;
+
+		FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+			     "Using Legacy Interrupts\n");
+		vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX);
+
+		return 0;
+	}
+
+	vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN);
+
+	return -EINVAL;
+}
+
+void fnic_clear_intr_mode(struct fnic *fnic)
+{
+	switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+	case VNIC_DEV_INTR_MODE_MSIX:
+		pci_disable_msix(fnic->pdev);
+		break;
+	case VNIC_DEV_INTR_MODE_MSI:
+		pci_disable_msi(fnic->pdev);
+		break;
+	default:
+		break;
+	}
+
+	vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX);
+}
+
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
new file mode 100644
index 00000000000..a84072865fc
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -0,0 +1,943 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/module.h>
+#include <linux/mempool.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "fnic_io.h"
+#include "fnic.h"
+
+#define PCI_DEVICE_ID_CISCO_FNIC	0x0045
+
+/* Timer to poll notification area for events. Used for MSI interrupts */
+#define FNIC_NOTIFY_TIMER_PERIOD	(2 * HZ)
+
+static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES];
+static struct kmem_cache *fnic_io_req_cache;
+LIST_HEAD(fnic_list);
+DEFINE_SPINLOCK(fnic_list_lock);
+
+/* Supported devices by fnic module */
+static struct pci_device_id fnic_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) },
+	{ 0, }
+};
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Abhijeet Joglekar <abjoglek@cisco.com>, "
+	      "Joseph R. Eykholt <jeykholt@cisco.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, fnic_id_table);
+
+unsigned int fnic_log_level;
+module_param(fnic_log_level, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels");
+
+
+static struct libfc_function_template fnic_transport_template = {
+	.frame_send = fnic_send,
+	.fcp_abort_io = fnic_empty_scsi_cleanup,
+	.fcp_cleanup = fnic_empty_scsi_cleanup,
+	.exch_mgr_reset = fnic_exch_mgr_reset
+};
+
+static int fnic_slave_alloc(struct scsi_device *sdev)
+{
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	struct fc_lport *lp = shost_priv(sdev->host);
+	struct fnic *fnic = lport_priv(lp);
+
+	sdev->tagged_supported = 1;
+
+	if (!rport || fc_remote_port_chkready(rport))
+		return -ENXIO;
+
+	scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH);
+	rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000;
+
+	return 0;
+}
+
+static struct scsi_host_template fnic_host_template = {
+	.module = THIS_MODULE,
+	.name = DRV_NAME,
+	.queuecommand = fnic_queuecommand,
+	.eh_abort_handler = fnic_abort_cmd,
+	.eh_device_reset_handler = fnic_device_reset,
+	.eh_host_reset_handler = fnic_host_reset,
+	.slave_alloc = fnic_slave_alloc,
+	.change_queue_depth = fc_change_queue_depth,
+	.change_queue_type = fc_change_queue_type,
+	.this_id = -1,
+	.cmd_per_lun = 3,
+	.can_queue = FNIC_MAX_IO_REQ,
+	.use_clustering = ENABLE_CLUSTERING,
+	.sg_tablesize = FNIC_MAX_SG_DESC_CNT,
+	.max_sectors = 0xffff,
+	.shost_attrs = fnic_attrs,
+};
+
+static void fnic_get_host_speed(struct Scsi_Host *shost);
+static struct scsi_transport_template *fnic_fc_transport;
+static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *);
+
+static struct fc_function_template fnic_fc_functions = {
+
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+	.show_host_supported_classes = 1,
+	.show_host_supported_fc4s = 1,
+	.show_host_active_fc4s = 1,
+	.show_host_maxframe_size = 1,
+	.show_host_port_id = 1,
+	.show_host_supported_speeds = 1,
+	.get_host_speed = fnic_get_host_speed,
+	.show_host_speed = 1,
+	.show_host_port_type = 1,
+	.get_host_port_state = fc_get_host_port_state,
+	.show_host_port_state = 1,
+	.show_host_symbolic_name = 1,
+	.show_rport_maxframe_size = 1,
+	.show_rport_supported_classes = 1,
+	.show_host_fabric_name = 1,
+	.show_starget_node_name = 1,
+	.show_starget_port_name = 1,
+	.show_starget_port_id = 1,
+	.show_rport_dev_loss_tmo = 1,
+	.issue_fc_host_lip = fnic_reset,
+	.get_fc_host_stats = fnic_get_stats,
+	.dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
+	.terminate_rport_io = fnic_terminate_rport_io,
+};
+
+static void fnic_get_host_speed(struct Scsi_Host *shost)
+{
+	struct fc_lport *lp = shost_priv(shost);
+	struct fnic *fnic = lport_priv(lp);
+	u32 port_speed = vnic_dev_port_speed(fnic->vdev);
+
+	/* Add in other values as they get defined in fw */
+	switch (port_speed) {
+	case 10000:
+		fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+		break;
+	default:
+		fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+		break;
+	}
+}
+
+static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host)
+{
+	int ret;
+	struct fc_lport *lp = shost_priv(host);
+	struct fnic *fnic = lport_priv(lp);
+	struct fc_host_statistics *stats = &lp->host_stats;
+	struct vnic_stats *vs;
+	unsigned long flags;
+
+	if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT))
+		return stats;
+	fnic->stats_time = jiffies;
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	if (ret) {
+		FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host,
+			      "fnic: Get vnic stats failed"
+			      " 0x%x", ret);
+		return stats;
+	}
+	vs = fnic->stats;
+	stats->tx_frames = vs->tx.tx_unicast_frames_ok;
+	stats->tx_words  = vs->tx.tx_unicast_bytes_ok / 4;
+	stats->rx_frames = vs->rx.rx_unicast_frames_ok;
+	stats->rx_words  = vs->rx.rx_unicast_bytes_ok / 4;
+	stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors;
+	stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop;
+	stats->invalid_crc_count = vs->rx.rx_crc_errors;
+	stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ;
+	stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000);
+	stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000);
+
+	return stats;
+}
+
+void fnic_log_q_error(struct fnic *fnic)
+{
+	unsigned int i;
+	u32 error_status;
+
+	for (i = 0; i < fnic->raw_wq_count; i++) {
+		error_status = ioread32(&fnic->wq[i].ctrl->error_status);
+		if (error_status)
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "WQ[%d] error_status"
+				     " %d\n", i, error_status);
+	}
+
+	for (i = 0; i < fnic->rq_count; i++) {
+		error_status = ioread32(&fnic->rq[i].ctrl->error_status);
+		if (error_status)
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "RQ[%d] error_status"
+				     " %d\n", i, error_status);
+	}
+
+	for (i = 0; i < fnic->wq_copy_count; i++) {
+		error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status);
+		if (error_status)
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "CWQ[%d] error_status"
+				     " %d\n", i, error_status);
+	}
+}
+
+void fnic_handle_link_event(struct fnic *fnic)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	if (fnic->stop_rx_link_events) {
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	queue_work(fnic_event_queue, &fnic->link_work);
+
+}
+
+static int fnic_notify_set(struct fnic *fnic)
+{
+	int err;
+
+	switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+	case VNIC_DEV_INTR_MODE_INTX:
+		err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY);
+		break;
+	case VNIC_DEV_INTR_MODE_MSI:
+		err = vnic_dev_notify_set(fnic->vdev, -1);
+		break;
+	case VNIC_DEV_INTR_MODE_MSIX:
+		err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY);
+		break;
+	default:
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Interrupt mode should be set up"
+			     " before devcmd notify set %d\n",
+			     vnic_dev_get_intr_mode(fnic->vdev));
+		err = -1;
+		break;
+	}
+
+	return err;
+}
+
+static void fnic_notify_timer(unsigned long data)
+{
+	struct fnic *fnic = (struct fnic *)data;
+
+	fnic_handle_link_event(fnic);
+	mod_timer(&fnic->notify_timer,
+		  round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD));
+}
+
+static void fnic_notify_timer_start(struct fnic *fnic)
+{
+	switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+	case VNIC_DEV_INTR_MODE_MSI:
+		/*
+		 * Schedule first timeout immediately. The driver is
+		 * initiatialized and ready to look for link up notification
+		 */
+		mod_timer(&fnic->notify_timer, jiffies);
+		break;
+	default:
+		/* Using intr for notification for INTx/MSI-X */
+		break;
+	};
+}
+
+static int fnic_dev_wait(struct vnic_dev *vdev,
+			 int (*start)(struct vnic_dev *, int),
+			 int (*finished)(struct vnic_dev *, int *),
+			 int arg)
+{
+	unsigned long time;
+	int done;
+	int err;
+
+	err = start(vdev, arg);
+	if (err)
+		return err;
+
+	/* Wait for func to complete...2 seconds max */
+	time = jiffies + (HZ * 2);
+	do {
+		err = finished(vdev, &done);
+		if (err)
+			return err;
+		if (done)
+			return 0;
+		schedule_timeout_uninterruptible(HZ / 10);
+	} while (time_after(time, jiffies));
+
+	return -ETIMEDOUT;
+}
+
+static int fnic_cleanup(struct fnic *fnic)
+{
+	unsigned int i;
+	int err;
+	unsigned long flags;
+	struct fc_frame *flogi = NULL;
+	struct fc_frame *flogi_resp = NULL;
+
+	vnic_dev_disable(fnic->vdev);
+	for (i = 0; i < fnic->intr_count; i++)
+		vnic_intr_mask(&fnic->intr[i]);
+
+	for (i = 0; i < fnic->rq_count; i++) {
+		err = vnic_rq_disable(&fnic->rq[i]);
+		if (err)
+			return err;
+	}
+	for (i = 0; i < fnic->raw_wq_count; i++) {
+		err = vnic_wq_disable(&fnic->wq[i]);
+		if (err)
+			return err;
+	}
+	for (i = 0; i < fnic->wq_copy_count; i++) {
+		err = vnic_wq_copy_disable(&fnic->wq_copy[i]);
+		if (err)
+			return err;
+	}
+
+	/* Clean up completed IOs and FCS frames */
+	fnic_wq_copy_cmpl_handler(fnic, -1);
+	fnic_wq_cmpl_handler(fnic, -1);
+	fnic_rq_cmpl_handler(fnic, -1);
+
+	/* Clean up the IOs and FCS frames that have not completed */
+	for (i = 0; i < fnic->raw_wq_count; i++)
+		vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf);
+	for (i = 0; i < fnic->rq_count; i++)
+		vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
+	for (i = 0; i < fnic->wq_copy_count; i++)
+		vnic_wq_copy_clean(&fnic->wq_copy[i],
+				   fnic_wq_copy_cleanup_handler);
+
+	for (i = 0; i < fnic->cq_count; i++)
+		vnic_cq_clean(&fnic->cq[i]);
+	for (i = 0; i < fnic->intr_count; i++)
+		vnic_intr_clean(&fnic->intr[i]);
+
+	/*
+	 * Remove cached flogi and flogi resp frames if any
+	 * These frames are not in any queue, and therefore queue
+	 * cleanup does not clean them. So clean them explicitly
+	 */
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	flogi = fnic->flogi;
+	fnic->flogi = NULL;
+	flogi_resp = fnic->flogi_resp;
+	fnic->flogi_resp = NULL;
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	if (flogi)
+		dev_kfree_skb(fp_skb(flogi));
+
+	if (flogi_resp)
+		dev_kfree_skb(fp_skb(flogi_resp));
+
+	mempool_destroy(fnic->io_req_pool);
+	for (i = 0; i < FNIC_SGL_NUM_CACHES; i++)
+		mempool_destroy(fnic->io_sgl_pool[i]);
+
+	return 0;
+}
+
+static void fnic_iounmap(struct fnic *fnic)
+{
+	if (fnic->bar0.vaddr)
+		iounmap(fnic->bar0.vaddr);
+}
+
+/*
+ * Allocate element for mempools requiring GFP_DMA flag.
+ * Otherwise, checks in kmem_flagcheck() hit BUG_ON().
+ */
+static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data)
+{
+	struct kmem_cache *mem = pool_data;
+
+	return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA);
+}
+
+static int __devinit fnic_probe(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	struct Scsi_Host *host;
+	struct fc_lport *lp;
+	struct fnic *fnic;
+	mempool_t *pool;
+	int err;
+	int i;
+	unsigned long flags;
+
+	/*
+	 * Allocate SCSI Host and set up association between host,
+	 * local port, and fnic
+	 */
+	host = scsi_host_alloc(&fnic_host_template,
+			       sizeof(struct fc_lport) + sizeof(struct fnic));
+	if (!host) {
+		printk(KERN_ERR PFX "Unable to alloc SCSI host\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+	lp = shost_priv(host);
+	lp->host = host;
+	fnic = lport_priv(lp);
+	fnic->lport = lp;
+
+	snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME,
+		 host->host_no);
+
+	host->transportt = fnic_fc_transport;
+
+	err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Unable to alloc shared tag map\n");
+		goto err_out_free_hba;
+	}
+
+	/* Setup PCI resources */
+	pci_set_drvdata(pdev, fnic);
+
+	fnic->pdev = pdev;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Cannot enable PCI device, aborting.\n");
+		goto err_out_free_hba;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Cannot enable PCI resources, aborting\n");
+		goto err_out_disable_device;
+	}
+
+	pci_set_master(pdev);
+
+	/* Query PCI controller on system for DMA addressing
+	 * limitation for the device.  Try 40-bit first, and
+	 * fail to 32-bit.
+	 */
+	err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+	if (err) {
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (err) {
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "No usable DMA configuration "
+				     "aborting\n");
+			goto err_out_release_regions;
+		}
+		err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		if (err) {
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "Unable to obtain 32-bit DMA "
+				     "for consistent allocations, aborting.\n");
+			goto err_out_release_regions;
+		}
+	} else {
+		err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+		if (err) {
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "Unable to obtain 40-bit DMA "
+				     "for consistent allocations, aborting.\n");
+			goto err_out_release_regions;
+		}
+	}
+
+	/* Map vNIC resources from BAR0 */
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "BAR0 not memory-map'able, aborting.\n");
+		err = -ENODEV;
+		goto err_out_release_regions;
+	}
+
+	fnic->bar0.vaddr = pci_iomap(pdev, 0, 0);
+	fnic->bar0.bus_addr = pci_resource_start(pdev, 0);
+	fnic->bar0.len = pci_resource_len(pdev, 0);
+
+	if (!fnic->bar0.vaddr) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Cannot memory-map BAR0 res hdr, "
+			     "aborting.\n");
+		err = -ENODEV;
+		goto err_out_release_regions;
+	}
+
+	fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0);
+	if (!fnic->vdev) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "vNIC registration failed, "
+			     "aborting.\n");
+		err = -ENODEV;
+		goto err_out_iounmap;
+	}
+
+	err = fnic_dev_wait(fnic->vdev, vnic_dev_open,
+			    vnic_dev_open_done, 0);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "vNIC dev open failed, aborting.\n");
+		goto err_out_vnic_unregister;
+	}
+
+	err = vnic_dev_init(fnic->vdev, 0);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "vNIC dev init failed, aborting.\n");
+		goto err_out_dev_close;
+	}
+
+	err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "vNIC get MAC addr failed \n");
+		goto err_out_dev_close;
+	}
+
+	/* Get vNIC configuration */
+	err = fnic_get_vnic_config(fnic);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Get vNIC configuration failed, "
+			     "aborting.\n");
+		goto err_out_dev_close;
+	}
+	host->max_lun = fnic->config.luns_per_tgt;
+	host->max_id = FNIC_MAX_FCP_TARGET;
+
+	fnic_get_res_counts(fnic);
+
+	err = fnic_set_intr_mode(fnic);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Failed to set intr mode, "
+			     "aborting.\n");
+		goto err_out_dev_close;
+	}
+
+	err = fnic_request_intr(fnic);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Unable to request irq.\n");
+		goto err_out_clear_intr;
+	}
+
+	err = fnic_alloc_vnic_resources(fnic);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Failed to alloc vNIC resources, "
+			     "aborting.\n");
+		goto err_out_free_intr;
+	}
+
+
+	/* initialize all fnic locks */
+	spin_lock_init(&fnic->fnic_lock);
+
+	for (i = 0; i < FNIC_WQ_MAX; i++)
+		spin_lock_init(&fnic->wq_lock[i]);
+
+	for (i = 0; i < FNIC_WQ_COPY_MAX; i++) {
+		spin_lock_init(&fnic->wq_copy_lock[i]);
+		fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK;
+		fnic->fw_ack_recd[i] = 0;
+		fnic->fw_ack_index[i] = -1;
+	}
+
+	for (i = 0; i < FNIC_IO_LOCKS; i++)
+		spin_lock_init(&fnic->io_req_lock[i]);
+
+	fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache);
+	if (!fnic->io_req_pool)
+		goto err_out_free_resources;
+
+	pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
+			      fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+	if (!pool)
+		goto err_out_free_ioreq_pool;
+	fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool;
+
+	pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
+			      fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+	if (!pool)
+		goto err_out_free_dflt_pool;
+	fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool;
+
+	/* setup vlan config, hw inserts vlan header */
+	fnic->vlan_hw_insert = 1;
+	fnic->vlan_id = 0;
+
+	fnic->flogi_oxid = FC_XID_UNKNOWN;
+	fnic->flogi = NULL;
+	fnic->flogi_resp = NULL;
+	fnic->state = FNIC_IN_FC_MODE;
+
+	/* Enable hardware stripping of vlan header on ingress */
+	fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1);
+
+	/* Setup notification buffer area */
+	err = fnic_notify_set(fnic);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Failed to alloc notify buffer, aborting.\n");
+		goto err_out_free_max_pool;
+	}
+
+	/* Setup notify timer when using MSI interrupts */
+	if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
+		setup_timer(&fnic->notify_timer,
+			    fnic_notify_timer, (unsigned long)fnic);
+
+	/* allocate RQ buffers and post them to RQ*/
+	for (i = 0; i < fnic->rq_count; i++) {
+		err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
+		if (err) {
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "fnic_alloc_rq_frame can't alloc "
+				     "frame\n");
+			goto err_out_free_rq_buf;
+		}
+	}
+
+	/*
+	 * Initialization done with PCI system, hardware, firmware.
+	 * Add host to SCSI
+	 */
+	err = scsi_add_host(lp->host, &pdev->dev);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "fnic: scsi_add_host failed...exiting\n");
+		goto err_out_free_rq_buf;
+	}
+
+	/* Start local port initiatialization */
+
+	lp->link_up = 0;
+	lp->tt = fnic_transport_template;
+
+	lp->emp = fc_exch_mgr_alloc(lp, FC_CLASS_3,
+				    FCPIO_HOST_EXCH_RANGE_START,
+				    FCPIO_HOST_EXCH_RANGE_END);
+	if (!lp->emp) {
+		err = -ENOMEM;
+		goto err_out_remove_scsi_host;
+	}
+
+	lp->max_retry_count = fnic->config.flogi_retries;
+	lp->max_rport_retry_count = fnic->config.plogi_retries;
+	lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
+			      FCP_SPPF_CONF_COMPL);
+	if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
+		lp->service_params |= FCP_SPPF_RETRY;
+
+	lp->boot_time = jiffies;
+	lp->e_d_tov = fnic->config.ed_tov;
+	lp->r_a_tov = fnic->config.ra_tov;
+	lp->link_supported_speeds = FC_PORTSPEED_10GBIT;
+	fc_set_wwnn(lp, fnic->config.node_wwn);
+	fc_set_wwpn(lp, fnic->config.port_wwn);
+
+	fc_exch_init(lp);
+	fc_lport_init(lp);
+	fc_elsct_init(lp);
+	fc_rport_init(lp);
+	fc_disc_init(lp);
+
+	fc_lport_config(lp);
+
+	if (fc_set_mfs(lp, fnic->config.maxdatafieldsize +
+		       sizeof(struct fc_frame_header))) {
+		err = -EINVAL;
+		goto err_out_free_exch_mgr;
+	}
+	fc_host_maxframe_size(lp->host) = lp->mfs;
+
+	sprintf(fc_host_symbolic_name(lp->host),
+		DRV_NAME " v" DRV_VERSION " over %s", fnic->name);
+
+	spin_lock_irqsave(&fnic_list_lock, flags);
+	list_add_tail(&fnic->list, &fnic_list);
+	spin_unlock_irqrestore(&fnic_list_lock, flags);
+
+	INIT_WORK(&fnic->link_work, fnic_handle_link);
+	INIT_WORK(&fnic->frame_work, fnic_handle_frame);
+	skb_queue_head_init(&fnic->frame_queue);
+
+	/* Enable all queues */
+	for (i = 0; i < fnic->raw_wq_count; i++)
+		vnic_wq_enable(&fnic->wq[i]);
+	for (i = 0; i < fnic->rq_count; i++)
+		vnic_rq_enable(&fnic->rq[i]);
+	for (i = 0; i < fnic->wq_copy_count; i++)
+		vnic_wq_copy_enable(&fnic->wq_copy[i]);
+
+	fc_fabric_login(lp);
+
+	vnic_dev_enable(fnic->vdev);
+	for (i = 0; i < fnic->intr_count; i++)
+		vnic_intr_unmask(&fnic->intr[i]);
+
+	fnic_notify_timer_start(fnic);
+
+	return 0;
+
+err_out_free_exch_mgr:
+	fc_exch_mgr_free(lp->emp);
+err_out_remove_scsi_host:
+	fc_remove_host(fnic->lport->host);
+	scsi_remove_host(fnic->lport->host);
+err_out_free_rq_buf:
+	for (i = 0; i < fnic->rq_count; i++)
+		vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
+	vnic_dev_notify_unset(fnic->vdev);
+err_out_free_max_pool:
+	mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]);
+err_out_free_dflt_pool:
+	mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]);
+err_out_free_ioreq_pool:
+	mempool_destroy(fnic->io_req_pool);
+err_out_free_resources:
+	fnic_free_vnic_resources(fnic);
+err_out_free_intr:
+	fnic_free_intr(fnic);
+err_out_clear_intr:
+	fnic_clear_intr_mode(fnic);
+err_out_dev_close:
+	vnic_dev_close(fnic->vdev);
+err_out_vnic_unregister:
+	vnic_dev_unregister(fnic->vdev);
+err_out_iounmap:
+	fnic_iounmap(fnic);
+err_out_release_regions:
+	pci_release_regions(pdev);
+err_out_disable_device:
+	pci_disable_device(pdev);
+err_out_free_hba:
+	scsi_host_put(lp->host);
+err_out:
+	return err;
+}
+
+static void __devexit fnic_remove(struct pci_dev *pdev)
+{
+	struct fnic *fnic = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	/*
+	 * Mark state so that the workqueue thread stops forwarding
+	 * received frames and link events to the local port. ISR and
+	 * other threads that can queue work items will also stop
+	 * creating work items on the fnic workqueue
+	 */
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	fnic->stop_rx_link_events = 1;
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
+		del_timer_sync(&fnic->notify_timer);
+
+	/*
+	 * Flush the fnic event queue. After this call, there should
+	 * be no event queued for this fnic device in the workqueue
+	 */
+	flush_workqueue(fnic_event_queue);
+	skb_queue_purge(&fnic->frame_queue);
+
+	/*
+	 * Log off the fabric. This stops all remote ports, dns port,
+	 * logs off the fabric. This flushes all rport, disc, lport work
+	 * before returning
+	 */
+	fc_fabric_logoff(fnic->lport);
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	fnic->in_remove = 1;
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	fc_lport_destroy(fnic->lport);
+
+	/*
+	 * This stops the fnic device, masks all interrupts. Completed
+	 * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are
+	 * cleaned up
+	 */
+	fnic_cleanup(fnic);
+
+	BUG_ON(!skb_queue_empty(&fnic->frame_queue));
+
+	spin_lock_irqsave(&fnic_list_lock, flags);
+	list_del(&fnic->list);
+	spin_unlock_irqrestore(&fnic_list_lock, flags);
+
+	fc_remove_host(fnic->lport->host);
+	scsi_remove_host(fnic->lport->host);
+	fc_exch_mgr_free(fnic->lport->emp);
+	vnic_dev_notify_unset(fnic->vdev);
+	fnic_free_vnic_resources(fnic);
+	fnic_free_intr(fnic);
+	fnic_clear_intr_mode(fnic);
+	vnic_dev_close(fnic->vdev);
+	vnic_dev_unregister(fnic->vdev);
+	fnic_iounmap(fnic);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	scsi_host_put(fnic->lport->host);
+}
+
+static struct pci_driver fnic_driver = {
+	.name = DRV_NAME,
+	.id_table = fnic_id_table,
+	.probe = fnic_probe,
+	.remove = __devexit_p(fnic_remove),
+};
+
+static int __init fnic_init_module(void)
+{
+	size_t len;
+	int err = 0;
+
+	printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION);
+
+	/* Create a cache for allocation of default size sgls */
+	len = sizeof(struct fnic_dflt_sgl_list);
+	fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create
+		("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
+		 SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
+		 NULL);
+	if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) {
+		printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n");
+		err = -ENOMEM;
+		goto err_create_fnic_sgl_slab_dflt;
+	}
+
+	/* Create a cache for allocation of max size sgls*/
+	len = sizeof(struct fnic_sgl_list);
+	fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create
+		("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
+		 SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
+		 NULL);
+	if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) {
+		printk(KERN_ERR PFX "failed to create fnic max sgl slab\n");
+		err = -ENOMEM;
+		goto err_create_fnic_sgl_slab_max;
+	}
+
+	/* Create a cache of io_req structs for use via mempool */
+	fnic_io_req_cache = kmem_cache_create("fnic_io_req",
+					      sizeof(struct fnic_io_req),
+					      0, SLAB_HWCACHE_ALIGN, NULL);
+	if (!fnic_io_req_cache) {
+		printk(KERN_ERR PFX "failed to create fnic io_req slab\n");
+		err = -ENOMEM;
+		goto err_create_fnic_ioreq_slab;
+	}
+
+	fnic_event_queue = create_singlethread_workqueue("fnic_event_wq");
+	if (!fnic_event_queue) {
+		printk(KERN_ERR PFX "fnic work queue create failed\n");
+		err = -ENOMEM;
+		goto err_create_fnic_workq;
+	}
+
+	spin_lock_init(&fnic_list_lock);
+	INIT_LIST_HEAD(&fnic_list);
+
+	fnic_fc_transport = fc_attach_transport(&fnic_fc_functions);
+	if (!fnic_fc_transport) {
+		printk(KERN_ERR PFX "fc_attach_transport error\n");
+		err = -ENOMEM;
+		goto err_fc_transport;
+	}
+
+	/* register the driver with PCI system */
+	err = pci_register_driver(&fnic_driver);
+	if (err < 0) {
+		printk(KERN_ERR PFX "pci register error\n");
+		goto err_pci_register;
+	}
+	return err;
+
+err_pci_register:
+	fc_release_transport(fnic_fc_transport);
+err_fc_transport:
+	destroy_workqueue(fnic_event_queue);
+err_create_fnic_workq:
+	kmem_cache_destroy(fnic_io_req_cache);
+err_create_fnic_ioreq_slab:
+	kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+err_create_fnic_sgl_slab_max:
+	kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+err_create_fnic_sgl_slab_dflt:
+	return err;
+}
+
+static void __exit fnic_cleanup_module(void)
+{
+	pci_unregister_driver(&fnic_driver);
+	destroy_workqueue(fnic_event_queue);
+	kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+	kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+	kmem_cache_destroy(fnic_io_req_cache);
+	fc_release_transport(fnic_fc_transport);
+}
+
+module_init(fnic_init_module);
+module_exit(fnic_cleanup_module);
+
diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c
new file mode 100644
index 00000000000..7ba61ec715d
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_res.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+#include "cq_enet_desc.h"
+#include "vnic_resource.h"
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "vnic_nic.h"
+#include "fnic.h"
+
+int fnic_get_vnic_config(struct fnic *fnic)
+{
+	struct vnic_fc_config *c = &fnic->config;
+	int err;
+
+#define GET_CONFIG(m) \
+	do { \
+		err = vnic_dev_spec(fnic->vdev, \
+				    offsetof(struct vnic_fc_config, m), \
+				    sizeof(c->m), &c->m); \
+		if (err) { \
+			shost_printk(KERN_ERR, fnic->lport->host, \
+				     "Error getting %s, %d\n", #m, \
+				     err); \
+			return err; \
+		} \
+	} while (0);
+
+	GET_CONFIG(node_wwn);
+	GET_CONFIG(port_wwn);
+	GET_CONFIG(wq_enet_desc_count);
+	GET_CONFIG(wq_copy_desc_count);
+	GET_CONFIG(rq_desc_count);
+	GET_CONFIG(maxdatafieldsize);
+	GET_CONFIG(ed_tov);
+	GET_CONFIG(ra_tov);
+	GET_CONFIG(intr_timer);
+	GET_CONFIG(intr_timer_type);
+	GET_CONFIG(flags);
+	GET_CONFIG(flogi_retries);
+	GET_CONFIG(flogi_timeout);
+	GET_CONFIG(plogi_retries);
+	GET_CONFIG(plogi_timeout);
+	GET_CONFIG(io_throttle_count);
+	GET_CONFIG(link_down_timeout);
+	GET_CONFIG(port_down_timeout);
+	GET_CONFIG(port_down_io_retries);
+	GET_CONFIG(luns_per_tgt);
+
+	c->wq_enet_desc_count =
+		min_t(u32, VNIC_FNIC_WQ_DESCS_MAX,
+		      max_t(u32, VNIC_FNIC_WQ_DESCS_MIN,
+			    c->wq_enet_desc_count));
+	c->wq_enet_desc_count = ALIGN(c->wq_enet_desc_count, 16);
+
+	c->wq_copy_desc_count =
+		min_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MAX,
+		      max_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MIN,
+			    c->wq_copy_desc_count));
+	c->wq_copy_desc_count = ALIGN(c->wq_copy_desc_count, 16);
+
+	c->rq_desc_count =
+		min_t(u32, VNIC_FNIC_RQ_DESCS_MAX,
+		      max_t(u32, VNIC_FNIC_RQ_DESCS_MIN,
+			    c->rq_desc_count));
+	c->rq_desc_count = ALIGN(c->rq_desc_count, 16);
+
+	c->maxdatafieldsize =
+		min_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MAX,
+		      max_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MIN,
+			    c->maxdatafieldsize));
+	c->ed_tov =
+		min_t(u32, VNIC_FNIC_EDTOV_MAX,
+		      max_t(u32, VNIC_FNIC_EDTOV_MIN,
+			    c->ed_tov));
+
+	c->ra_tov =
+		min_t(u32, VNIC_FNIC_RATOV_MAX,
+		      max_t(u32, VNIC_FNIC_RATOV_MIN,
+			    c->ra_tov));
+
+	c->flogi_retries =
+		min_t(u32, VNIC_FNIC_FLOGI_RETRIES_MAX, c->flogi_retries);
+
+	c->flogi_timeout =
+		min_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MAX,
+		      max_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MIN,
+			    c->flogi_timeout));
+
+	c->plogi_retries =
+		min_t(u32, VNIC_FNIC_PLOGI_RETRIES_MAX, c->plogi_retries);
+
+	c->plogi_timeout =
+		min_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MAX,
+		      max_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MIN,
+			    c->plogi_timeout));
+
+	c->io_throttle_count =
+		min_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MAX,
+		      max_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MIN,
+			    c->io_throttle_count));
+
+	c->link_down_timeout =
+		min_t(u32, VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX,
+		      c->link_down_timeout);
+
+	c->port_down_timeout =
+		min_t(u32, VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX,
+		      c->port_down_timeout);
+
+	c->port_down_io_retries =
+		min_t(u32, VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX,
+		      c->port_down_io_retries);
+
+	c->luns_per_tgt =
+		min_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MAX,
+		      max_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MIN,
+			    c->luns_per_tgt));
+
+	c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer);
+	c->intr_timer_type = c->intr_timer_type;
+
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x "
+		     "wq/wq_copy/rq %d/%d/%d\n",
+		     fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2],
+		     fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5],
+		     c->wq_enet_desc_count, c->wq_copy_desc_count,
+		     c->rq_desc_count);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC node wwn %llx port wwn %llx\n",
+		     c->node_wwn, c->port_wwn);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC ed_tov %d ra_tov %d\n",
+		     c->ed_tov, c->ra_tov);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC mtu %d intr timer %d\n",
+		     c->maxdatafieldsize, c->intr_timer);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC flags 0x%x luns per tgt %d\n",
+		     c->flags, c->luns_per_tgt);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC flogi_retries %d flogi timeout %d\n",
+		     c->flogi_retries, c->flogi_timeout);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC plogi retries %d plogi timeout %d\n",
+		     c->plogi_retries, c->plogi_timeout);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC io throttle count %d link dn timeout %d\n",
+		     c->io_throttle_count, c->link_down_timeout);
+	shost_printk(KERN_INFO, fnic->lport->host,
+		     "vNIC port dn io retries %d port dn timeout %d\n",
+		     c->port_down_io_retries, c->port_down_timeout);
+
+	return 0;
+}
+
+int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
+			u8 rss_hash_type,
+			u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable,
+			u8 tso_ipid_split_en, u8 ig_vlan_strip_en)
+{
+	u64 a0, a1;
+	u32 nic_cfg;
+	int wait = 1000;
+
+	vnic_set_nic_cfg(&nic_cfg, rss_default_cpu,
+		rss_hash_type, rss_hash_bits, rss_base_cpu,
+		rss_enable, tso_ipid_split_en, ig_vlan_strip_en);
+
+	a0 = nic_cfg;
+	a1 = 0;
+
+	return vnic_dev_cmd(fnic->vdev, CMD_NIC_CFG, &a0, &a1, wait);
+}
+
+void fnic_get_res_counts(struct fnic *fnic)
+{
+	fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ);
+	fnic->raw_wq_count = fnic->wq_count - 1;
+	fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count;
+	fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ);
+	fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ);
+	fnic->intr_count = vnic_dev_get_res_count(fnic->vdev,
+		RES_TYPE_INTR_CTRL);
+}
+
+void fnic_free_vnic_resources(struct fnic *fnic)
+{
+	unsigned int i;
+
+	for (i = 0; i < fnic->raw_wq_count; i++)
+		vnic_wq_free(&fnic->wq[i]);
+
+	for (i = 0; i < fnic->wq_copy_count; i++)
+		vnic_wq_copy_free(&fnic->wq_copy[i]);
+
+	for (i = 0; i < fnic->rq_count; i++)
+		vnic_rq_free(&fnic->rq[i]);
+
+	for (i = 0; i < fnic->cq_count; i++)
+		vnic_cq_free(&fnic->cq[i]);
+
+	for (i = 0; i < fnic->intr_count; i++)
+		vnic_intr_free(&fnic->intr[i]);
+}
+
+int fnic_alloc_vnic_resources(struct fnic *fnic)
+{
+	enum vnic_dev_intr_mode intr_mode;
+	unsigned int mask_on_assertion;
+	unsigned int interrupt_offset;
+	unsigned int error_interrupt_enable;
+	unsigned int error_interrupt_offset;
+	unsigned int i, cq_index;
+	unsigned int wq_copy_cq_desc_count;
+	int err;
+
+	intr_mode = vnic_dev_get_intr_mode(fnic->vdev);
+
+	shost_printk(KERN_INFO, fnic->lport->host, "vNIC interrupt mode: %s\n",
+		     intr_mode == VNIC_DEV_INTR_MODE_INTX ? "legacy PCI INTx" :
+		     intr_mode == VNIC_DEV_INTR_MODE_MSI ? "MSI" :
+		     intr_mode == VNIC_DEV_INTR_MODE_MSIX ?
+		     "MSI-X" : "unknown");
+
+	shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: "
+		     "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n",
+		     fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count,
+		     fnic->rq_count, fnic->cq_count, fnic->intr_count);
+
+	/* Allocate Raw WQ used for FCS frames */
+	for (i = 0; i < fnic->raw_wq_count; i++) {
+		err = vnic_wq_alloc(fnic->vdev, &fnic->wq[i], i,
+			fnic->config.wq_enet_desc_count,
+			sizeof(struct wq_enet_desc));
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	/* Allocate Copy WQs used for SCSI IOs */
+	for (i = 0; i < fnic->wq_copy_count; i++) {
+		err = vnic_wq_copy_alloc(fnic->vdev, &fnic->wq_copy[i],
+			(fnic->raw_wq_count + i),
+			fnic->config.wq_copy_desc_count,
+			sizeof(struct fcpio_host_req));
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	/* RQ for receiving FCS frames */
+	for (i = 0; i < fnic->rq_count; i++) {
+		err = vnic_rq_alloc(fnic->vdev, &fnic->rq[i], i,
+			fnic->config.rq_desc_count,
+			sizeof(struct rq_enet_desc));
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	/* CQ for each RQ */
+	for (i = 0; i < fnic->rq_count; i++) {
+		cq_index = i;
+		err = vnic_cq_alloc(fnic->vdev,
+			&fnic->cq[cq_index], cq_index,
+			fnic->config.rq_desc_count,
+			sizeof(struct cq_enet_rq_desc));
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	/* CQ for each WQ */
+	for (i = 0; i < fnic->raw_wq_count; i++) {
+		cq_index = fnic->rq_count + i;
+		err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], cq_index,
+			fnic->config.wq_enet_desc_count,
+			sizeof(struct cq_enet_wq_desc));
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	/* CQ for each COPY WQ */
+	wq_copy_cq_desc_count = (fnic->config.wq_copy_desc_count * 3);
+	for (i = 0; i < fnic->wq_copy_count; i++) {
+		cq_index = fnic->raw_wq_count + fnic->rq_count + i;
+		err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index],
+			cq_index,
+			wq_copy_cq_desc_count,
+			sizeof(struct fcpio_fw_req));
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	for (i = 0; i < fnic->intr_count; i++) {
+		err = vnic_intr_alloc(fnic->vdev, &fnic->intr[i], i);
+		if (err)
+			goto err_out_cleanup;
+	}
+
+	fnic->legacy_pba = vnic_dev_get_res(fnic->vdev,
+				RES_TYPE_INTR_PBA_LEGACY, 0);
+
+	if (!fnic->legacy_pba && intr_mode == VNIC_DEV_INTR_MODE_INTX) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Failed to hook legacy pba resource\n");
+		err = -ENODEV;
+		goto err_out_cleanup;
+	}
+
+	/*
+	 * Init RQ/WQ resources.
+	 *
+	 * RQ[0 to n-1] point to CQ[0 to n-1]
+	 * WQ[0 to m-1] point to CQ[n to n+m-1]
+	 * WQ_COPY[0 to k-1] points to CQ[n+m to n+m+k-1]
+	 *
+	 * Note for copy wq we always initialize with cq_index = 0
+	 *
+	 * Error interrupt is not enabled for MSI.
+	 */
+
+	switch (intr_mode) {
+	case VNIC_DEV_INTR_MODE_INTX:
+	case VNIC_DEV_INTR_MODE_MSIX:
+		error_interrupt_enable = 1;
+		error_interrupt_offset = fnic->err_intr_offset;
+		break;
+	default:
+		error_interrupt_enable = 0;
+		error_interrupt_offset = 0;
+		break;
+	}
+
+	for (i = 0; i < fnic->rq_count; i++) {
+		cq_index = i;
+		vnic_rq_init(&fnic->rq[i],
+			     cq_index,
+			     error_interrupt_enable,
+			     error_interrupt_offset);
+	}
+
+	for (i = 0; i < fnic->raw_wq_count; i++) {
+		cq_index = i + fnic->rq_count;
+		vnic_wq_init(&fnic->wq[i],
+			     cq_index,
+			     error_interrupt_enable,
+			     error_interrupt_offset);
+	}
+
+	for (i = 0; i < fnic->wq_copy_count; i++) {
+		vnic_wq_copy_init(&fnic->wq_copy[i],
+				  0 /* cq_index 0 - always */,
+				  error_interrupt_enable,
+				  error_interrupt_offset);
+	}
+
+	for (i = 0; i < fnic->cq_count; i++) {
+
+		switch (intr_mode) {
+		case VNIC_DEV_INTR_MODE_MSIX:
+			interrupt_offset = i;
+			break;
+		default:
+			interrupt_offset = 0;
+			break;
+		}
+
+		vnic_cq_init(&fnic->cq[i],
+			0 /* flow_control_enable */,
+			1 /* color_enable */,
+			0 /* cq_head */,
+			0 /* cq_tail */,
+			1 /* cq_tail_color */,
+			1 /* interrupt_enable */,
+			1 /* cq_entry_enable */,
+			0 /* cq_message_enable */,
+			interrupt_offset,
+			0 /* cq_message_addr */);
+	}
+
+	/*
+	 * Init INTR resources
+	 *
+	 * mask_on_assertion is not used for INTx due to the level-
+	 * triggered nature of INTx
+	 */
+
+	switch (intr_mode) {
+	case VNIC_DEV_INTR_MODE_MSI:
+	case VNIC_DEV_INTR_MODE_MSIX:
+		mask_on_assertion = 1;
+		break;
+	default:
+		mask_on_assertion = 0;
+		break;
+	}
+
+	for (i = 0; i < fnic->intr_count; i++) {
+		vnic_intr_init(&fnic->intr[i],
+			fnic->config.intr_timer,
+			fnic->config.intr_timer_type,
+			mask_on_assertion);
+	}
+
+	/* init the stats memory by making the first call here */
+	err = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
+	if (err) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "vnic_dev_stats_dump failed - x%x\n", err);
+		goto err_out_cleanup;
+	}
+
+	/* Clear LIF stats */
+	vnic_dev_stats_clear(fnic->vdev);
+
+	return 0;
+
+err_out_cleanup:
+	fnic_free_vnic_resources(fnic);
+
+	return err;
+}
diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h
new file mode 100644
index 00000000000..b6f31026253
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_res.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_RES_H_
+#define _FNIC_RES_H_
+
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "fnic_io.h"
+#include "fcpio.h"
+#include "vnic_wq_copy.h"
+#include "vnic_cq_copy.h"
+
+static inline void fnic_queue_wq_desc(struct vnic_wq *wq,
+				      void *os_buf, dma_addr_t dma_addr,
+				      unsigned int len, unsigned int fc_eof,
+				      int vlan_tag_insert,
+				      unsigned int vlan_tag,
+				      int cq_entry, int sop, int eop)
+{
+	struct wq_enet_desc *desc = vnic_wq_next_desc(wq);
+
+	wq_enet_desc_enc(desc,
+			 (u64)dma_addr | VNIC_PADDR_TARGET,
+			 (u16)len,
+			 0, /* mss_or_csum_offset */
+			 (u16)fc_eof,
+			 0, /* offload_mode */
+			 (u8)eop, (u8)cq_entry,
+			 1, /* fcoe_encap */
+			 (u8)vlan_tag_insert,
+			 (u16)vlan_tag,
+			 0 /* loopback */);
+
+	vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop);
+}
+
+static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq,
+						    u32 req_id,
+						    u32 lunmap_id, u8 spl_flags,
+						    u32 sgl_cnt, u32 sense_len,
+						    u64 sgl_addr, u64 sns_addr,
+						    u8 crn, u8 pri_ta,
+						    u8 flags, u8 *scsi_cdb,
+						    u32 data_len, u8 *lun,
+						    u32 d_id, u16 mss,
+						    u32 ratov, u32 edtov)
+{
+	struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+	desc->hdr.type = FCPIO_ICMND_16; /* enum fcpio_type */
+	desc->hdr.status = 0;            /* header status entry */
+	desc->hdr._resvd = 0;            /* reserved */
+	desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+	desc->u.icmnd_16.lunmap_id = lunmap_id; /* index into lunmap table */
+	desc->u.icmnd_16.special_req_flags = spl_flags; /* exch req flags */
+	desc->u.icmnd_16._resvd0[0] = 0;        /* reserved */
+	desc->u.icmnd_16._resvd0[1] = 0;        /* reserved */
+	desc->u.icmnd_16._resvd0[2] = 0;        /* reserved */
+	desc->u.icmnd_16.sgl_cnt = sgl_cnt;     /* scatter-gather list count */
+	desc->u.icmnd_16.sense_len = sense_len; /* sense buffer length */
+	desc->u.icmnd_16.sgl_addr = sgl_addr;   /* scatter-gather list addr */
+	desc->u.icmnd_16.sense_addr = sns_addr; /* sense buffer address */
+	desc->u.icmnd_16.crn = crn;             /* SCSI Command Reference No.*/
+	desc->u.icmnd_16.pri_ta = pri_ta; 	/* SCSI Pri & Task attribute */
+	desc->u.icmnd_16._resvd1 = 0;           /* reserved: should be 0 */
+	desc->u.icmnd_16.flags = flags;         /* command flags */
+	memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16);    /* SCSI CDB */
+	desc->u.icmnd_16.data_len = data_len;   /* length of data expected */
+	memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS);  /* LUN address */
+	desc->u.icmnd_16._resvd2 = 0;          	/* reserved */
+	hton24(desc->u.icmnd_16.d_id, d_id);	/* FC vNIC only: Target D_ID */
+	desc->u.icmnd_16.mss = mss;            	/* FC vNIC only: max burst */
+	desc->u.icmnd_16.r_a_tov = ratov; /*FC vNIC only: Res. Alloc Timeout */
+	desc->u.icmnd_16.e_d_tov = edtov; /*FC vNIC only: Err Detect Timeout */
+
+	vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_itmf(struct vnic_wq_copy *wq,
+						u32 req_id, u32 lunmap_id,
+						u32 tm_req, u32 tm_id, u8 *lun,
+						u32 d_id, u32 r_a_tov,
+						u32 e_d_tov)
+{
+	struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+	desc->hdr.type = FCPIO_ITMF;     /* enum fcpio_type */
+	desc->hdr.status = 0;            /* header status entry */
+	desc->hdr._resvd = 0;            /* reserved */
+	desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+	desc->u.itmf.lunmap_id = lunmap_id; /* index into lunmap table */
+	desc->u.itmf.tm_req = tm_req;       /* SCSI Task Management request */
+	desc->u.itmf.t_tag = tm_id;         /* tag of fcpio to be aborted */
+	desc->u.itmf._resvd = 0;
+	memcpy(desc->u.itmf.lun, lun, LUN_ADDRESS);  /* LUN address */
+	desc->u.itmf._resvd1 = 0;
+	hton24(desc->u.itmf.d_id, d_id);    /* FC vNIC only: Target D_ID */
+	desc->u.itmf.r_a_tov = r_a_tov;     /* FC vNIC only: R_A_TOV in msec */
+	desc->u.itmf.e_d_tov = e_d_tov;     /* FC vNIC only: E_D_TOV in msec */
+
+	vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq,
+						     u32 req_id, u8 format,
+						     u32 s_id, u8 *gw_mac)
+{
+	struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+	desc->hdr.type = FCPIO_FLOGI_REG;     /* enum fcpio_type */
+	desc->hdr.status = 0;                 /* header status entry */
+	desc->hdr._resvd = 0;                 /* reserved */
+	desc->hdr.tag.u.req_id = req_id;      /* id for this request */
+
+	desc->u.flogi_reg.format = format;
+	hton24(desc->u.flogi_reg.s_id, s_id);
+	memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN);
+
+	vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq,
+						    u32 req_id)
+{
+	struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+	desc->hdr.type = FCPIO_RESET;     /* enum fcpio_type */
+	desc->hdr.status = 0;             /* header status entry */
+	desc->hdr._resvd = 0;             /* reserved */
+	desc->hdr.tag.u.req_id = req_id;  /* id for this request */
+
+	vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_lunmap(struct vnic_wq_copy *wq,
+						  u32 req_id, u64 lunmap_addr,
+						  u32 lunmap_len)
+{
+	struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+	desc->hdr.type = FCPIO_LUNMAP_REQ;	/* enum fcpio_type */
+	desc->hdr.status = 0;			/* header status entry */
+	desc->hdr._resvd = 0;			/* reserved */
+	desc->hdr.tag.u.req_id = req_id;	/* id for this request */
+
+	desc->u.lunmap_req.addr = lunmap_addr;	/* address of the buffer */
+	desc->u.lunmap_req.len = lunmap_len;	/* len of the buffer */
+
+	vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_rq_desc(struct vnic_rq *rq,
+				      void *os_buf, dma_addr_t dma_addr,
+				      u16 len)
+{
+	struct rq_enet_desc *desc = vnic_rq_next_desc(rq);
+
+	rq_enet_desc_enc(desc,
+		(u64)dma_addr | VNIC_PADDR_TARGET,
+		RQ_ENET_TYPE_ONLY_SOP,
+		(u16)len);
+
+	vnic_rq_post(rq, os_buf, 0, dma_addr, len);
+}
+
+
+struct fnic;
+
+int fnic_get_vnic_config(struct fnic *);
+int fnic_alloc_vnic_resources(struct fnic *);
+void fnic_free_vnic_resources(struct fnic *);
+void fnic_get_res_counts(struct fnic *);
+int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
+			u8 rss_hash_type, u8 rss_hash_bits, u8 rss_base_cpu,
+			u8 rss_enable, u8 tso_ipid_split_en,
+			u8 ig_vlan_strip_en);
+
+#endif /* _FNIC_RES_H_ */
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
new file mode 100644
index 00000000000..eabf3650285
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -0,0 +1,1850 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/mempool.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/delay.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+#include "fnic_io.h"
+#include "fnic.h"
+
+const char *fnic_state_str[] = {
+	[FNIC_IN_FC_MODE] =           "FNIC_IN_FC_MODE",
+	[FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE",
+	[FNIC_IN_ETH_MODE] =          "FNIC_IN_ETH_MODE",
+	[FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE",
+};
+
+static const char *fnic_ioreq_state_str[] = {
+	[FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING",
+	[FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING",
+	[FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE",
+	[FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE",
+};
+
+static const char *fcpio_status_str[] =  {
+	[FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/
+	[FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER",
+	[FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE",
+	[FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]",
+	[FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED",
+	[FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND",
+	[FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/
+	[FCPIO_TIMEOUT] = "FCPIO_TIMEOUT",
+	[FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID",
+	[FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID",
+	[FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH",
+	[FCPIO_FW_ERR] = "FCPIO_FW_ERR",
+	[FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED",
+	[FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED",
+	[FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN",
+	[FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED",
+	[FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL",
+	[FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED",
+	[FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND",
+};
+
+const char *fnic_state_to_str(unsigned int state)
+{
+	if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state])
+		return "unknown";
+
+	return fnic_state_str[state];
+}
+
+static const char *fnic_ioreq_state_to_str(unsigned int state)
+{
+	if (state >= ARRAY_SIZE(fnic_ioreq_state_str) ||
+	    !fnic_ioreq_state_str[state])
+		return "unknown";
+
+	return fnic_ioreq_state_str[state];
+}
+
+static const char *fnic_fcpio_status_to_str(unsigned int status)
+{
+	if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status])
+		return "unknown";
+
+	return fcpio_status_str[status];
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
+
+static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
+					    struct scsi_cmnd *sc)
+{
+	u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
+
+	return &fnic->io_req_lock[hash];
+}
+
+/*
+ * Unmap the data buffer and sense buffer for an io_req,
+ * also unmap and free the device-private scatter/gather list.
+ */
+static void fnic_release_ioreq_buf(struct fnic *fnic,
+				   struct fnic_io_req *io_req,
+				   struct scsi_cmnd *sc)
+{
+	if (io_req->sgl_list_pa)
+		pci_unmap_single(fnic->pdev, io_req->sgl_list_pa,
+				 sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt,
+				 PCI_DMA_TODEVICE);
+	scsi_dma_unmap(sc);
+
+	if (io_req->sgl_cnt)
+		mempool_free(io_req->sgl_list_alloc,
+			     fnic->io_sgl_pool[io_req->sgl_type]);
+	if (io_req->sense_buf_pa)
+		pci_unmap_single(fnic->pdev, io_req->sense_buf_pa,
+				 SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
+}
+
+/* Free up Copy Wq descriptors. Called with copy_wq lock held */
+static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq)
+{
+	/* if no Ack received from firmware, then nothing to clean */
+	if (!fnic->fw_ack_recd[0])
+		return 1;
+
+	/*
+	 * Update desc_available count based on number of freed descriptors
+	 * Account for wraparound
+	 */
+	if (wq->to_clean_index <= fnic->fw_ack_index[0])
+		wq->ring.desc_avail += (fnic->fw_ack_index[0]
+					- wq->to_clean_index + 1);
+	else
+		wq->ring.desc_avail += (wq->ring.desc_count
+					- wq->to_clean_index
+					+ fnic->fw_ack_index[0] + 1);
+
+	/*
+	 * just bump clean index to ack_index+1 accounting for wraparound
+	 * this will essentially free up all descriptors between
+	 * to_clean_index and fw_ack_index, both inclusive
+	 */
+	wq->to_clean_index =
+		(fnic->fw_ack_index[0] + 1) % wq->ring.desc_count;
+
+	/* we have processed the acks received so far */
+	fnic->fw_ack_recd[0] = 0;
+	return 0;
+}
+
+
+/*
+ * fnic_fw_reset_handler
+ * Routine to send reset msg to fw
+ */
+int fnic_fw_reset_handler(struct fnic *fnic)
+{
+	struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+	if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+		free_wq_copy_descs(fnic, wq);
+
+	if (!vnic_wq_copy_desc_avail(wq))
+		ret = -EAGAIN;
+	else
+		fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG);
+
+	spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+	if (!ret)
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "Issued fw reset\n");
+	else
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "Failed to issue fw reset\n");
+	return ret;
+}
+
+
+/*
+ * fnic_flogi_reg_handler
+ * Routine to send flogi register msg to fw
+ */
+int fnic_flogi_reg_handler(struct fnic *fnic)
+{
+	struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+	u8 gw_mac[ETH_ALEN];
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+	if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+		free_wq_copy_descs(fnic, wq);
+
+	if (!vnic_wq_copy_desc_avail(wq)) {
+		ret = -EAGAIN;
+		goto flogi_reg_ioreq_end;
+	}
+
+	if (fnic->fcoui_mode)
+		memset(gw_mac, 0xff, ETH_ALEN);
+	else
+		memcpy(gw_mac, fnic->dest_addr, ETH_ALEN);
+
+	fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG,
+					  FCPIO_FLOGI_REG_GW_DEST,
+					  fnic->s_id,
+					  gw_mac);
+
+flogi_reg_ioreq_end:
+	spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+	if (!ret)
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "flog reg issued\n");
+
+	return ret;
+}
+
+/*
+ * fnic_queue_wq_copy_desc
+ * Routine to enqueue a wq copy desc
+ */
+static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
+					  struct vnic_wq_copy *wq,
+					  struct fnic_io_req *io_req,
+					  struct scsi_cmnd *sc,
+					  u32 sg_count)
+{
+	struct scatterlist *sg;
+	struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+	struct fc_rport_libfc_priv *rp = rport->dd_data;
+	struct host_sg_desc *desc;
+	u8 pri_tag = 0;
+	unsigned int i;
+	unsigned long intr_flags;
+	int flags;
+	u8 exch_flags;
+	struct scsi_lun fc_lun;
+	char msg[2];
+
+	if (sg_count) {
+		BUG_ON(sg_count < 0);
+		BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
+
+		/* For each SGE, create a device desc entry */
+		desc = io_req->sgl_list;
+		for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
+			desc->addr = cpu_to_le64(sg_dma_address(sg));
+			desc->len = cpu_to_le32(sg_dma_len(sg));
+			desc->_resvd = 0;
+			desc++;
+		}
+
+		io_req->sgl_list_pa = pci_map_single
+			(fnic->pdev,
+			 io_req->sgl_list,
+			 sizeof(io_req->sgl_list[0]) * sg_count,
+			 PCI_DMA_TODEVICE);
+	}
+
+	io_req->sense_buf_pa = pci_map_single(fnic->pdev,
+					      sc->sense_buffer,
+					      SCSI_SENSE_BUFFERSIZE,
+					      PCI_DMA_FROMDEVICE);
+
+	int_to_scsilun(sc->device->lun, &fc_lun);
+
+	pri_tag = FCPIO_ICMND_PTA_SIMPLE;
+	msg[0] = MSG_SIMPLE_TAG;
+	scsi_populate_tag_msg(sc, msg);
+	if (msg[0] == MSG_ORDERED_TAG)
+		pri_tag = FCPIO_ICMND_PTA_ORDERED;
+
+	/* Enqueue the descriptor in the Copy WQ */
+	spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+	if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+		free_wq_copy_descs(fnic, wq);
+
+	if (unlikely(!vnic_wq_copy_desc_avail(wq))) {
+		spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+		return SCSI_MLQUEUE_HOST_BUSY;
+	}
+
+	flags = 0;
+	if (sc->sc_data_direction == DMA_FROM_DEVICE)
+		flags = FCPIO_ICMND_RDDATA;
+	else if (sc->sc_data_direction == DMA_TO_DEVICE)
+		flags = FCPIO_ICMND_WRDATA;
+
+	exch_flags = 0;
+	if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) &&
+	    (rp->flags & FC_RP_FLAGS_RETRY))
+		exch_flags |= FCPIO_ICMND_SRFLAG_RETRY;
+
+	fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag,
+					 0, exch_flags, io_req->sgl_cnt,
+					 SCSI_SENSE_BUFFERSIZE,
+					 io_req->sgl_list_pa,
+					 io_req->sense_buf_pa,
+					 0, /* scsi cmd ref, always 0 */
+					 pri_tag, /* scsi pri and tag */
+					 flags,	/* command flags */
+					 sc->cmnd, scsi_bufflen(sc),
+					 fc_lun.scsi_lun, io_req->port_id,
+					 rport->maxframe_size, rp->r_a_tov,
+					 rp->e_d_tov);
+
+	spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+	return 0;
+}
+
+/*
+ * fnic_queuecommand
+ * Routine to send a scsi cdb
+ * Called with host_lock held and interrupts disabled.
+ */
+int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+{
+	struct fc_lport *lp;
+	struct fc_rport *rport;
+	struct fnic_io_req *io_req;
+	struct fnic *fnic;
+	struct vnic_wq_copy *wq;
+	int ret;
+	u32 sg_count;
+	unsigned long flags;
+	unsigned long ptr;
+
+	rport = starget_to_rport(scsi_target(sc->device));
+	ret = fc_remote_port_chkready(rport);
+	if (ret) {
+		sc->result = ret;
+		done(sc);
+		return 0;
+	}
+
+	lp = shost_priv(sc->device->host);
+	if (lp->state != LPORT_ST_READY || !(lp->link_up))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	/*
+	 * Release host lock, use driver resource specific locks from here.
+	 * Don't re-enable interrupts in case they were disabled prior to the
+	 * caller disabling them.
+	 */
+	spin_unlock(lp->host->host_lock);
+
+	/* Get a new io_req for this SCSI IO */
+	fnic = lport_priv(lp);
+
+	io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+	if (!io_req) {
+		ret = SCSI_MLQUEUE_HOST_BUSY;
+		goto out;
+	}
+	memset(io_req, 0, sizeof(*io_req));
+
+	/* Map the data buffer */
+	sg_count = scsi_dma_map(sc);
+	if (sg_count < 0) {
+		mempool_free(io_req, fnic->io_req_pool);
+		goto out;
+	}
+
+	/* Determine the type of scatter/gather list we need */
+	io_req->sgl_cnt = sg_count;
+	io_req->sgl_type = FNIC_SGL_CACHE_DFLT;
+	if (sg_count > FNIC_DFLT_SG_DESC_CNT)
+		io_req->sgl_type = FNIC_SGL_CACHE_MAX;
+
+	if (sg_count) {
+		io_req->sgl_list =
+			mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type],
+				      GFP_ATOMIC | GFP_DMA);
+		if (!io_req->sgl_list) {
+			ret = SCSI_MLQUEUE_HOST_BUSY;
+			scsi_dma_unmap(sc);
+			mempool_free(io_req, fnic->io_req_pool);
+			goto out;
+		}
+
+		/* Cache sgl list allocated address before alignment */
+		io_req->sgl_list_alloc = io_req->sgl_list;
+		ptr = (unsigned long) io_req->sgl_list;
+		if (ptr % FNIC_SG_DESC_ALIGN) {
+			io_req->sgl_list = (struct host_sg_desc *)
+				(((unsigned long) ptr
+				  + FNIC_SG_DESC_ALIGN - 1)
+				 & ~(FNIC_SG_DESC_ALIGN - 1));
+		}
+	}
+
+	/* initialize rest of io_req */
+	io_req->port_id = rport->port_id;
+	CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+	CMD_SP(sc) = (char *)io_req;
+	sc->scsi_done = done;
+
+	/* create copy wq desc and enqueue it */
+	wq = &fnic->wq_copy[0];
+	ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count);
+	if (ret) {
+		/*
+		 * In case another thread cancelled the request,
+		 * refetch the pointer under the lock.
+		 */
+		spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
+
+		spin_lock_irqsave(io_lock, flags);
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		CMD_SP(sc) = NULL;
+		CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+		spin_unlock_irqrestore(io_lock, flags);
+		if (io_req) {
+			fnic_release_ioreq_buf(fnic, io_req, sc);
+			mempool_free(io_req, fnic->io_req_pool);
+		}
+	}
+out:
+	/* acquire host lock before returning to SCSI */
+	spin_lock(lp->host->host_lock);
+	return ret;
+}
+
+/*
+ * fnic_fcpio_fw_reset_cmpl_handler
+ * Routine to handle fw reset completion
+ */
+static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
+					    struct fcpio_fw_req *desc)
+{
+	u8 type;
+	u8 hdr_status;
+	struct fcpio_tag tag;
+	int ret = 0;
+	struct fc_frame *flogi;
+	unsigned long flags;
+
+	fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+	/* Clean up all outstanding io requests */
+	fnic_cleanup_io(fnic, SCSI_NO_TAG);
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+	flogi = fnic->flogi;
+	fnic->flogi = NULL;
+
+	/* fnic should be in FC_TRANS_ETH_MODE */
+	if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) {
+		/* Check status of reset completion */
+		if (!hdr_status) {
+			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+				      "reset cmpl success\n");
+			/* Ready to send flogi out */
+			fnic->state = FNIC_IN_ETH_MODE;
+		} else {
+			FNIC_SCSI_DBG(KERN_DEBUG,
+				      fnic->lport->host,
+				      "fnic fw_reset : failed %s\n",
+				      fnic_fcpio_status_to_str(hdr_status));
+
+			/*
+			 * Unable to change to eth mode, cannot send out flogi
+			 * Change state to fc mode, so that subsequent Flogi
+			 * requests from libFC will cause more attempts to
+			 * reset the firmware. Free the cached flogi
+			 */
+			fnic->state = FNIC_IN_FC_MODE;
+			ret = -1;
+		}
+	} else {
+		FNIC_SCSI_DBG(KERN_DEBUG,
+			      fnic->lport->host,
+			      "Unexpected state %s while processing"
+			      " reset cmpl\n", fnic_state_to_str(fnic->state));
+		ret = -1;
+	}
+
+	/* Thread removing device blocks till firmware reset is complete */
+	if (fnic->remove_wait)
+		complete(fnic->remove_wait);
+
+	/*
+	 * If fnic is being removed, or fw reset failed
+	 * free the flogi frame. Else, send it out
+	 */
+	if (fnic->remove_wait || ret) {
+		fnic->flogi_oxid = FC_XID_UNKNOWN;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		if (flogi)
+			dev_kfree_skb_irq(fp_skb(flogi));
+		goto reset_cmpl_handler_end;
+	}
+
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	if (flogi)
+		ret = fnic_send_frame(fnic, flogi);
+
+ reset_cmpl_handler_end:
+	return ret;
+}
+
+/*
+ * fnic_fcpio_flogi_reg_cmpl_handler
+ * Routine to handle flogi register completion
+ */
+static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic,
+					     struct fcpio_fw_req *desc)
+{
+	u8 type;
+	u8 hdr_status;
+	struct fcpio_tag tag;
+	int ret = 0;
+	struct fc_frame *flogi_resp = NULL;
+	unsigned long flags;
+	struct sk_buff *skb;
+
+	fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+	/* Update fnic state based on status of flogi reg completion */
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+	flogi_resp = fnic->flogi_resp;
+	fnic->flogi_resp = NULL;
+
+	if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) {
+
+		/* Check flogi registration completion status */
+		if (!hdr_status) {
+			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+				      "flog reg succeeded\n");
+			fnic->state = FNIC_IN_FC_MODE;
+		} else {
+			FNIC_SCSI_DBG(KERN_DEBUG,
+				      fnic->lport->host,
+				      "fnic flogi reg :failed %s\n",
+				      fnic_fcpio_status_to_str(hdr_status));
+			fnic->state = FNIC_IN_ETH_MODE;
+			ret = -1;
+		}
+	} else {
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "Unexpected fnic state %s while"
+			      " processing flogi reg completion\n",
+			      fnic_state_to_str(fnic->state));
+		ret = -1;
+	}
+
+	/* Successful flogi reg cmpl, pass frame to LibFC */
+	if (!ret && flogi_resp) {
+		if (fnic->stop_rx_link_events) {
+			spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+			goto reg_cmpl_handler_end;
+		}
+		skb = (struct sk_buff *)flogi_resp;
+		/* Use fr_flags to indicate whether flogi resp or not */
+		fr_flags(flogi_resp) = 1;
+		fr_dev(flogi_resp) = fnic->lport;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+		skb_queue_tail(&fnic->frame_queue, skb);
+		queue_work(fnic_event_queue, &fnic->frame_work);
+
+	} else {
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		if (flogi_resp)
+			dev_kfree_skb_irq(fp_skb(flogi_resp));
+	}
+
+reg_cmpl_handler_end:
+	return ret;
+}
+
+static inline int is_ack_index_in_range(struct vnic_wq_copy *wq,
+					u16 request_out)
+{
+	if (wq->to_clean_index <= wq->to_use_index) {
+		/* out of range, stale request_out index */
+		if (request_out < wq->to_clean_index ||
+		    request_out >= wq->to_use_index)
+			return 0;
+	} else {
+		/* out of range, stale request_out index */
+		if (request_out < wq->to_clean_index &&
+		    request_out >= wq->to_use_index)
+			return 0;
+	}
+	/* request_out index is in range */
+	return 1;
+}
+
+
+/*
+ * Mark that ack received and store the Ack index. If there are multiple
+ * acks received before Tx thread cleans it up, the latest value will be
+ * used which is correct behavior. This state should be in the copy Wq
+ * instead of in the fnic
+ */
+static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
+					  unsigned int cq_index,
+					  struct fcpio_fw_req *desc)
+{
+	struct vnic_wq_copy *wq;
+	u16 request_out = desc->u.ack.request_out;
+	unsigned long flags;
+
+	/* mark the ack state */
+	wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count];
+	spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+	if (is_ack_index_in_range(wq, request_out)) {
+		fnic->fw_ack_index[0] = request_out;
+		fnic->fw_ack_recd[0] = 1;
+	}
+	spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+}
+
+/*
+ * fnic_fcpio_icmnd_cmpl_handler
+ * Routine to handle icmnd completions
+ */
+static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
+					 struct fcpio_fw_req *desc)
+{
+	u8 type;
+	u8 hdr_status;
+	struct fcpio_tag tag;
+	u32 id;
+	u64 xfer_len = 0;
+	struct fcpio_icmnd_cmpl *icmnd_cmpl;
+	struct fnic_io_req *io_req;
+	struct scsi_cmnd *sc;
+	unsigned long flags;
+	spinlock_t *io_lock;
+
+	/* Decode the cmpl description to get the io_req id */
+	fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+	fcpio_tag_id_dec(&tag, &id);
+
+	if (id >= FNIC_MAX_IO_REQ)
+		return;
+
+	sc = scsi_host_find_tag(fnic->lport->host, id);
+	WARN_ON_ONCE(!sc);
+	if (!sc)
+		return;
+
+	io_lock = fnic_io_lock_hash(fnic, sc);
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	WARN_ON_ONCE(!io_req);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return;
+	}
+
+	/* firmware completed the io */
+	io_req->io_completed = 1;
+
+	/*
+	 *  if SCSI-ML has already issued abort on this command,
+	 * ignore completion of the IO. The abts path will clean it up
+	 */
+	if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return;
+	}
+
+	/* Mark the IO as complete */
+	CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+
+	icmnd_cmpl = &desc->u.icmnd_cmpl;
+
+	switch (hdr_status) {
+	case FCPIO_SUCCESS:
+		sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status;
+		xfer_len = scsi_bufflen(sc);
+		scsi_set_resid(sc, icmnd_cmpl->residual);
+
+		if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER)
+			xfer_len -= icmnd_cmpl->residual;
+
+		/*
+		 * If queue_full, then try to reduce queue depth for all
+		 * LUNS on the target. Todo: this should be accompanied
+		 * by a periodic queue_depth rampup based on successful
+		 * IO completion.
+		 */
+		if (icmnd_cmpl->scsi_status == QUEUE_FULL) {
+			struct scsi_device *t_sdev;
+			int qd = 0;
+
+			shost_for_each_device(t_sdev, sc->device->host) {
+				if (t_sdev->id != sc->device->id)
+					continue;
+
+				if (t_sdev->queue_depth > 1) {
+					qd = scsi_track_queue_full
+						(t_sdev,
+						 t_sdev->queue_depth - 1);
+					if (qd == -1)
+						qd = t_sdev->host->cmd_per_lun;
+					shost_printk(KERN_INFO,
+						     fnic->lport->host,
+						     "scsi[%d:%d:%d:%d"
+						     "] queue full detected,"
+						     "new depth = %d\n",
+						     t_sdev->host->host_no,
+						     t_sdev->channel,
+						     t_sdev->id, t_sdev->lun,
+						     t_sdev->queue_depth);
+				}
+			}
+		}
+		break;
+
+	case FCPIO_TIMEOUT:          /* request was timed out */
+		sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status;
+		break;
+
+	case FCPIO_ABORTED:          /* request was aborted */
+		sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+		break;
+
+	case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */
+		scsi_set_resid(sc, icmnd_cmpl->residual);
+		sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+		break;
+
+	case FCPIO_OUT_OF_RESOURCE:  /* out of resources to complete request */
+		sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status;
+		break;
+	case FCPIO_INVALID_HEADER:   /* header contains invalid data */
+	case FCPIO_INVALID_PARAM:    /* some parameter in request invalid */
+	case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */
+	case FCPIO_IO_NOT_FOUND:     /* requested I/O was not found */
+	case FCPIO_SGL_INVALID:      /* request was aborted due to sgl error */
+	case FCPIO_MSS_INVALID:      /* request was aborted due to mss error */
+	case FCPIO_FW_ERR:           /* request was terminated due fw error */
+	default:
+		shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n",
+			     fnic_fcpio_status_to_str(hdr_status));
+		sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+		break;
+	}
+
+	/* Break link with the SCSI command */
+	CMD_SP(sc) = NULL;
+
+	spin_unlock_irqrestore(io_lock, flags);
+
+	fnic_release_ioreq_buf(fnic, io_req, sc);
+
+	mempool_free(io_req, fnic->io_req_pool);
+
+	if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+		fnic->lport->host_stats.fcp_input_requests++;
+		fnic->fcp_input_bytes += xfer_len;
+	} else if (sc->sc_data_direction == DMA_TO_DEVICE) {
+		fnic->lport->host_stats.fcp_output_requests++;
+		fnic->fcp_output_bytes += xfer_len;
+	} else
+		fnic->lport->host_stats.fcp_control_requests++;
+
+	/* Call SCSI completion function to complete the IO */
+	if (sc->scsi_done)
+		sc->scsi_done(sc);
+
+}
+
+/* fnic_fcpio_itmf_cmpl_handler
+ * Routine to handle itmf completions
+ */
+static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
+					struct fcpio_fw_req *desc)
+{
+	u8 type;
+	u8 hdr_status;
+	struct fcpio_tag tag;
+	u32 id;
+	struct scsi_cmnd *sc;
+	struct fnic_io_req *io_req;
+	unsigned long flags;
+	spinlock_t *io_lock;
+
+	fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+	fcpio_tag_id_dec(&tag, &id);
+
+	if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ)
+		return;
+
+	sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK);
+	WARN_ON_ONCE(!sc);
+	if (!sc)
+		return;
+
+	io_lock = fnic_io_lock_hash(fnic, sc);
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	WARN_ON_ONCE(!io_req);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return;
+	}
+
+	if (id & FNIC_TAG_ABORT) {
+		/* Completion of abort cmd */
+		if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) {
+			/* This is a late completion. Ignore it */
+			spin_unlock_irqrestore(io_lock, flags);
+			return;
+		}
+		CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
+		CMD_ABTS_STATUS(sc) = hdr_status;
+
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "abts cmpl recd. id %d status %s\n",
+			      (int)(id & FNIC_TAG_MASK),
+			      fnic_fcpio_status_to_str(hdr_status));
+
+		/*
+		 * If scsi_eh thread is blocked waiting for abts to complete,
+		 * signal completion to it. IO will be cleaned in the thread
+		 * else clean it in this context
+		 */
+		if (io_req->abts_done) {
+			complete(io_req->abts_done);
+			spin_unlock_irqrestore(io_lock, flags);
+		} else {
+			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+				      "abts cmpl, completing IO\n");
+			CMD_SP(sc) = NULL;
+			sc->result = (DID_ERROR << 16);
+
+			spin_unlock_irqrestore(io_lock, flags);
+
+			fnic_release_ioreq_buf(fnic, io_req, sc);
+			mempool_free(io_req, fnic->io_req_pool);
+			if (sc->scsi_done)
+				sc->scsi_done(sc);
+		}
+
+	} else if (id & FNIC_TAG_DEV_RST) {
+		/* Completion of device reset */
+		CMD_LR_STATUS(sc) = hdr_status;
+		CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "dev reset cmpl recd. id %d status %s\n",
+			      (int)(id & FNIC_TAG_MASK),
+			      fnic_fcpio_status_to_str(hdr_status));
+		if (io_req->dr_done)
+			complete(io_req->dr_done);
+		spin_unlock_irqrestore(io_lock, flags);
+
+	} else {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "Unexpected itmf io state %s tag %x\n",
+			     fnic_ioreq_state_to_str(CMD_STATE(sc)), id);
+		spin_unlock_irqrestore(io_lock, flags);
+	}
+
+}
+
+/*
+ * fnic_fcpio_cmpl_handler
+ * Routine to service the cq for wq_copy
+ */
+static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
+				   unsigned int cq_index,
+				   struct fcpio_fw_req *desc)
+{
+	struct fnic *fnic = vnic_dev_priv(vdev);
+	int ret = 0;
+
+	switch (desc->hdr.type) {
+	case FCPIO_ACK: /* fw copied copy wq desc to its queue */
+		fnic_fcpio_ack_handler(fnic, cq_index, desc);
+		break;
+
+	case FCPIO_ICMND_CMPL: /* fw completed a command */
+		fnic_fcpio_icmnd_cmpl_handler(fnic, desc);
+		break;
+
+	case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/
+		fnic_fcpio_itmf_cmpl_handler(fnic, desc);
+		break;
+
+	case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
+		ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
+		break;
+
+	case FCPIO_RESET_CMPL: /* fw completed reset */
+		ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
+		break;
+
+	default:
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "firmware completion type %d\n",
+			      desc->hdr.type);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * fnic_wq_copy_cmpl_handler
+ * Routine to process wq copy
+ */
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
+{
+	unsigned int wq_work_done = 0;
+	unsigned int i, cq_index;
+	unsigned int cur_work_done;
+
+	for (i = 0; i < fnic->wq_copy_count; i++) {
+		cq_index = i + fnic->raw_wq_count + fnic->rq_count;
+		cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index],
+						     fnic_fcpio_cmpl_handler,
+						     copy_work_to_do);
+		wq_work_done += cur_work_done;
+	}
+	return wq_work_done;
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
+{
+	unsigned int i;
+	struct fnic_io_req *io_req;
+	unsigned long flags = 0;
+	struct scsi_cmnd *sc;
+	spinlock_t *io_lock;
+
+	for (i = 0; i < FNIC_MAX_IO_REQ; i++) {
+		if (i == exclude_id)
+			continue;
+
+		sc = scsi_host_find_tag(fnic->lport->host, i);
+		if (!sc)
+			continue;
+
+		io_lock = fnic_io_lock_hash(fnic, sc);
+		spin_lock_irqsave(io_lock, flags);
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		if (!io_req) {
+			spin_unlock_irqrestore(io_lock, flags);
+			goto cleanup_scsi_cmd;
+		}
+
+		CMD_SP(sc) = NULL;
+
+		spin_unlock_irqrestore(io_lock, flags);
+
+		/*
+		 * If there is a scsi_cmnd associated with this io_req, then
+		 * free the corresponding state
+		 */
+		fnic_release_ioreq_buf(fnic, io_req, sc);
+		mempool_free(io_req, fnic->io_req_pool);
+
+cleanup_scsi_cmd:
+		sc->result = DID_TRANSPORT_DISRUPTED << 16;
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:"
+			      " DID_TRANSPORT_DISRUPTED\n");
+
+		/* Complete the command to SCSI */
+		if (sc->scsi_done)
+			sc->scsi_done(sc);
+	}
+}
+
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+				  struct fcpio_host_req *desc)
+{
+	u32 id;
+	struct fnic *fnic = vnic_dev_priv(wq->vdev);
+	struct fnic_io_req *io_req;
+	struct scsi_cmnd *sc;
+	unsigned long flags;
+	spinlock_t *io_lock;
+
+	/* get the tag reference */
+	fcpio_tag_id_dec(&desc->hdr.tag, &id);
+	id &= FNIC_TAG_MASK;
+
+	if (id >= FNIC_MAX_IO_REQ)
+		return;
+
+	sc = scsi_host_find_tag(fnic->lport->host, id);
+	if (!sc)
+		return;
+
+	io_lock = fnic_io_lock_hash(fnic, sc);
+	spin_lock_irqsave(io_lock, flags);
+
+	/* Get the IO context which this desc refers to */
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+	/* fnic interrupts are turned off by now */
+
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		goto wq_copy_cleanup_scsi_cmd;
+	}
+
+	CMD_SP(sc) = NULL;
+
+	spin_unlock_irqrestore(io_lock, flags);
+
+	fnic_release_ioreq_buf(fnic, io_req, sc);
+	mempool_free(io_req, fnic->io_req_pool);
+
+wq_copy_cleanup_scsi_cmd:
+	sc->result = DID_NO_CONNECT << 16;
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:"
+		      " DID_NO_CONNECT\n");
+
+	if (sc->scsi_done)
+		sc->scsi_done(sc);
+}
+
+static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
+					  u32 task_req, u8 *fc_lun,
+					  struct fnic_io_req *io_req)
+{
+	struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+	unsigned long flags;
+
+	spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+	if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+		free_wq_copy_descs(fnic, wq);
+
+	if (!vnic_wq_copy_desc_avail(wq)) {
+		spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+		return 1;
+	}
+	fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT,
+				     0, task_req, tag, fc_lun, io_req->port_id,
+				     fnic->config.ra_tov, fnic->config.ed_tov);
+
+	spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+	return 0;
+}
+
+void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
+{
+	int tag;
+	struct fnic_io_req *io_req;
+	spinlock_t *io_lock;
+	unsigned long flags;
+	struct scsi_cmnd *sc;
+	struct scsi_lun fc_lun;
+	enum fnic_ioreq_state old_ioreq_state;
+
+	FNIC_SCSI_DBG(KERN_DEBUG,
+		      fnic->lport->host,
+		      "fnic_rport_reset_exch called portid 0x%06x\n",
+		      port_id);
+
+	if (fnic->in_remove)
+		return;
+
+	for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+		sc = scsi_host_find_tag(fnic->lport->host, tag);
+		if (!sc)
+			continue;
+
+		io_lock = fnic_io_lock_hash(fnic, sc);
+		spin_lock_irqsave(io_lock, flags);
+
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+		if (!io_req || io_req->port_id != port_id) {
+			spin_unlock_irqrestore(io_lock, flags);
+			continue;
+		}
+
+		/*
+		 * Found IO that is still pending with firmware and
+		 * belongs to rport that went away
+		 */
+		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+			spin_unlock_irqrestore(io_lock, flags);
+			continue;
+		}
+		old_ioreq_state = CMD_STATE(sc);
+		CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+		CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+		BUG_ON(io_req->abts_done);
+
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "fnic_rport_reset_exch: Issuing abts\n");
+
+		spin_unlock_irqrestore(io_lock, flags);
+
+		/* Now queue the abort command to firmware */
+		int_to_scsilun(sc->device->lun, &fc_lun);
+
+		if (fnic_queue_abort_io_req(fnic, tag,
+					    FCPIO_ITMF_ABT_TASK_TERM,
+					    fc_lun.scsi_lun, io_req)) {
+			/*
+			 * Revert the cmd state back to old state, if
+			 * it hasnt changed in between. This cmd will get
+			 * aborted later by scsi_eh, or cleaned up during
+			 * lun reset
+			 */
+			io_lock = fnic_io_lock_hash(fnic, sc);
+
+			spin_lock_irqsave(io_lock, flags);
+			if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+				CMD_STATE(sc) = old_ioreq_state;
+			spin_unlock_irqrestore(io_lock, flags);
+		}
+	}
+
+}
+
+void fnic_terminate_rport_io(struct fc_rport *rport)
+{
+	int tag;
+	struct fnic_io_req *io_req;
+	spinlock_t *io_lock;
+	unsigned long flags;
+	struct scsi_cmnd *sc;
+	struct scsi_lun fc_lun;
+	struct fc_rport_libfc_priv *rdata = rport->dd_data;
+	struct fc_lport *lport = rdata->local_port;
+	struct fnic *fnic = lport_priv(lport);
+	struct fc_rport *cmd_rport;
+	enum fnic_ioreq_state old_ioreq_state;
+
+	FNIC_SCSI_DBG(KERN_DEBUG,
+		      fnic->lport->host, "fnic_terminate_rport_io called"
+		      " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n",
+		      rport->port_name, rport->node_name,
+		      rport->port_id);
+
+	if (fnic->in_remove)
+		return;
+
+	for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+		sc = scsi_host_find_tag(fnic->lport->host, tag);
+		if (!sc)
+			continue;
+
+		cmd_rport = starget_to_rport(scsi_target(sc->device));
+		if (rport != cmd_rport)
+			continue;
+
+		io_lock = fnic_io_lock_hash(fnic, sc);
+		spin_lock_irqsave(io_lock, flags);
+
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+		if (!io_req || rport != cmd_rport) {
+			spin_unlock_irqrestore(io_lock, flags);
+			continue;
+		}
+
+		/*
+		 * Found IO that is still pending with firmware and
+		 * belongs to rport that went away
+		 */
+		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+			spin_unlock_irqrestore(io_lock, flags);
+			continue;
+		}
+		old_ioreq_state = CMD_STATE(sc);
+		CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+		CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+		BUG_ON(io_req->abts_done);
+
+		FNIC_SCSI_DBG(KERN_DEBUG,
+			      fnic->lport->host,
+			      "fnic_terminate_rport_io: Issuing abts\n");
+
+		spin_unlock_irqrestore(io_lock, flags);
+
+		/* Now queue the abort command to firmware */
+		int_to_scsilun(sc->device->lun, &fc_lun);
+
+		if (fnic_queue_abort_io_req(fnic, tag,
+					    FCPIO_ITMF_ABT_TASK_TERM,
+					    fc_lun.scsi_lun, io_req)) {
+			/*
+			 * Revert the cmd state back to old state, if
+			 * it hasnt changed in between. This cmd will get
+			 * aborted later by scsi_eh, or cleaned up during
+			 * lun reset
+			 */
+			io_lock = fnic_io_lock_hash(fnic, sc);
+
+			spin_lock_irqsave(io_lock, flags);
+			if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+				CMD_STATE(sc) = old_ioreq_state;
+			spin_unlock_irqrestore(io_lock, flags);
+		}
+	}
+
+}
+
+static void fnic_block_error_handler(struct scsi_cmnd *sc)
+{
+	struct Scsi_Host *shost = sc->device->host;
+	struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+	unsigned long flags;
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+		spin_unlock_irqrestore(shost->host_lock, flags);
+		msleep(1000);
+		spin_lock_irqsave(shost->host_lock, flags);
+	}
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+}
+
+/*
+ * This function is exported to SCSI for sending abort cmnds.
+ * A SCSI IO is represented by a io_req in the driver.
+ * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO.
+ */
+int fnic_abort_cmd(struct scsi_cmnd *sc)
+{
+	struct fc_lport *lp;
+	struct fnic *fnic;
+	struct fnic_io_req *io_req;
+	struct fc_rport *rport;
+	spinlock_t *io_lock;
+	unsigned long flags;
+	int ret = SUCCESS;
+	u32 task_req;
+	struct scsi_lun fc_lun;
+	DECLARE_COMPLETION_ONSTACK(tm_done);
+
+	/* Wait for rport to unblock */
+	fnic_block_error_handler(sc);
+
+	/* Get local-port, check ready and link up */
+	lp = shost_priv(sc->device->host);
+
+	fnic = lport_priv(lp);
+	FNIC_SCSI_DBG(KERN_DEBUG,
+		      fnic->lport->host,
+		      "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
+		      (starget_to_rport(scsi_target(sc->device)))->port_id,
+		      sc->device->lun, sc->request->tag);
+
+	if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
+		ret = FAILED;
+		goto fnic_abort_cmd_end;
+	}
+
+	/*
+	 * Avoid a race between SCSI issuing the abort and the device
+	 * completing the command.
+	 *
+	 * If the command is already completed by the fw cmpl code,
+	 * we just return SUCCESS from here. This means that the abort
+	 * succeeded. In the SCSI ML, since the timeout for command has
+	 * happened, the completion wont actually complete the command
+	 * and it will be considered as an aborted command
+	 *
+	 * The CMD_SP will not be cleared except while holding io_req_lock.
+	 */
+	io_lock = fnic_io_lock_hash(fnic, sc);
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		goto fnic_abort_cmd_end;
+	}
+
+	io_req->abts_done = &tm_done;
+
+	if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+		spin_unlock_irqrestore(io_lock, flags);
+		goto wait_pending;
+	}
+	/*
+	 * Command is still pending, need to abort it
+	 * If the firmware completes the command after this point,
+	 * the completion wont be done till mid-layer, since abort
+	 * has already started.
+	 */
+	CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+	CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+	spin_unlock_irqrestore(io_lock, flags);
+
+	/*
+	 * Check readiness of the remote port. If the path to remote
+	 * port is up, then send abts to the remote port to terminate
+	 * the IO. Else, just locally terminate the IO in the firmware
+	 */
+	rport = starget_to_rport(scsi_target(sc->device));
+	if (fc_remote_port_chkready(rport) == 0)
+		task_req = FCPIO_ITMF_ABT_TASK;
+	else
+		task_req = FCPIO_ITMF_ABT_TASK_TERM;
+
+	/* Now queue the abort command to firmware */
+	int_to_scsilun(sc->device->lun, &fc_lun);
+
+	if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
+				    fc_lun.scsi_lun, io_req)) {
+		spin_lock_irqsave(io_lock, flags);
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		if (io_req)
+			io_req->abts_done = NULL;
+		spin_unlock_irqrestore(io_lock, flags);
+		ret = FAILED;
+		goto fnic_abort_cmd_end;
+	}
+
+	/*
+	 * We queued an abort IO, wait for its completion.
+	 * Once the firmware completes the abort command, it will
+	 * wake up this thread.
+	 */
+ wait_pending:
+	wait_for_completion_timeout(&tm_done,
+				    msecs_to_jiffies
+				    (2 * fnic->config.ra_tov +
+				     fnic->config.ed_tov));
+
+	/* Check the abort status */
+	spin_lock_irqsave(io_lock, flags);
+
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		ret = FAILED;
+		goto fnic_abort_cmd_end;
+	}
+	io_req->abts_done = NULL;
+
+	/* fw did not complete abort, timed out */
+	if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+		spin_unlock_irqrestore(io_lock, flags);
+		ret = FAILED;
+		goto fnic_abort_cmd_end;
+	}
+
+	/*
+	 * firmware completed the abort, check the status,
+	 * free the io_req irrespective of failure or success
+	 */
+	if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
+		ret = FAILED;
+
+	CMD_SP(sc) = NULL;
+
+	spin_unlock_irqrestore(io_lock, flags);
+
+	fnic_release_ioreq_buf(fnic, io_req, sc);
+	mempool_free(io_req, fnic->io_req_pool);
+
+fnic_abort_cmd_end:
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "Returning from abort cmd %s\n",
+		      (ret == SUCCESS) ?
+		      "SUCCESS" : "FAILED");
+	return ret;
+}
+
+static inline int fnic_queue_dr_io_req(struct fnic *fnic,
+				       struct scsi_cmnd *sc,
+				       struct fnic_io_req *io_req)
+{
+	struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+	struct scsi_lun fc_lun;
+	int ret = 0;
+	unsigned long intr_flags;
+
+	spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+	if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+		free_wq_copy_descs(fnic, wq);
+
+	if (!vnic_wq_copy_desc_avail(wq)) {
+		ret = -EAGAIN;
+		goto lr_io_req_end;
+	}
+
+	/* fill in the lun info */
+	int_to_scsilun(sc->device->lun, &fc_lun);
+
+	fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST,
+				     0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG,
+				     fc_lun.scsi_lun, io_req->port_id,
+				     fnic->config.ra_tov, fnic->config.ed_tov);
+
+lr_io_req_end:
+	spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+
+	return ret;
+}
+
+/*
+ * Clean up any pending aborts on the lun
+ * For each outstanding IO on this lun, whose abort is not completed by fw,
+ * issue a local abort. Wait for abort to complete. Return 0 if all commands
+ * successfully aborted, 1 otherwise
+ */
+static int fnic_clean_pending_aborts(struct fnic *fnic,
+				     struct scsi_cmnd *lr_sc)
+{
+	int tag;
+	struct fnic_io_req *io_req;
+	spinlock_t *io_lock;
+	unsigned long flags;
+	int ret = 0;
+	struct scsi_cmnd *sc;
+	struct fc_rport *rport;
+	struct scsi_lun fc_lun;
+	struct scsi_device *lun_dev = lr_sc->device;
+	DECLARE_COMPLETION_ONSTACK(tm_done);
+
+	for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+		sc = scsi_host_find_tag(fnic->lport->host, tag);
+		/*
+		 * ignore this lun reset cmd or cmds that do not belong to
+		 * this lun
+		 */
+		if (!sc || sc == lr_sc || sc->device != lun_dev)
+			continue;
+
+		io_lock = fnic_io_lock_hash(fnic, sc);
+		spin_lock_irqsave(io_lock, flags);
+
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+		if (!io_req || sc->device != lun_dev) {
+			spin_unlock_irqrestore(io_lock, flags);
+			continue;
+		}
+
+		/*
+		 * Found IO that is still pending with firmware and
+		 * belongs to the LUN that we are resetting
+		 */
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "Found IO in %s on lun\n",
+			      fnic_ioreq_state_to_str(CMD_STATE(sc)));
+
+		BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING);
+
+		CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+		io_req->abts_done = &tm_done;
+		spin_unlock_irqrestore(io_lock, flags);
+
+		/* Now queue the abort command to firmware */
+		int_to_scsilun(sc->device->lun, &fc_lun);
+		rport = starget_to_rport(scsi_target(sc->device));
+
+		if (fnic_queue_abort_io_req(fnic, tag,
+					    FCPIO_ITMF_ABT_TASK_TERM,
+					    fc_lun.scsi_lun, io_req)) {
+			spin_lock_irqsave(io_lock, flags);
+			io_req = (struct fnic_io_req *)CMD_SP(sc);
+			if (io_req)
+				io_req->abts_done = NULL;
+			spin_unlock_irqrestore(io_lock, flags);
+			ret = 1;
+			goto clean_pending_aborts_end;
+		}
+
+		wait_for_completion_timeout(&tm_done,
+					    msecs_to_jiffies
+					    (fnic->config.ed_tov));
+
+		/* Recheck cmd state to check if it is now aborted */
+		spin_lock_irqsave(io_lock, flags);
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		if (!io_req) {
+			spin_unlock_irqrestore(io_lock, flags);
+			ret = 1;
+			goto clean_pending_aborts_end;
+		}
+
+		io_req->abts_done = NULL;
+
+		/* if abort is still pending with fw, fail */
+		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+			spin_unlock_irqrestore(io_lock, flags);
+			ret = 1;
+			goto clean_pending_aborts_end;
+		}
+		CMD_SP(sc) = NULL;
+		spin_unlock_irqrestore(io_lock, flags);
+
+		fnic_release_ioreq_buf(fnic, io_req, sc);
+		mempool_free(io_req, fnic->io_req_pool);
+	}
+
+clean_pending_aborts_end:
+	return ret;
+}
+
+/*
+ * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN
+ * fail to get aborted. It calls driver's eh_device_reset with a SCSI command
+ * on the LUN.
+ */
+int fnic_device_reset(struct scsi_cmnd *sc)
+{
+	struct fc_lport *lp;
+	struct fnic *fnic;
+	struct fnic_io_req *io_req;
+	struct fc_rport *rport;
+	int status;
+	int ret = FAILED;
+	spinlock_t *io_lock;
+	unsigned long flags;
+	DECLARE_COMPLETION_ONSTACK(tm_done);
+
+	/* Wait for rport to unblock */
+	fnic_block_error_handler(sc);
+
+	/* Get local-port, check ready and link up */
+	lp = shost_priv(sc->device->host);
+
+	fnic = lport_priv(lp);
+	FNIC_SCSI_DBG(KERN_DEBUG,
+		      fnic->lport->host,
+		      "Device reset called FCID 0x%x, LUN 0x%x\n",
+		      (starget_to_rport(scsi_target(sc->device)))->port_id,
+		      sc->device->lun);
+
+
+	if (lp->state != LPORT_ST_READY || !(lp->link_up))
+		goto fnic_device_reset_end;
+
+	/* Check if remote port up */
+	rport = starget_to_rport(scsi_target(sc->device));
+	if (fc_remote_port_chkready(rport))
+		goto fnic_device_reset_end;
+
+	io_lock = fnic_io_lock_hash(fnic, sc);
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+	/*
+	 * If there is a io_req attached to this command, then use it,
+	 * else allocate a new one.
+	 */
+	if (!io_req) {
+		io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+		if (!io_req) {
+			spin_unlock_irqrestore(io_lock, flags);
+			goto fnic_device_reset_end;
+		}
+		memset(io_req, 0, sizeof(*io_req));
+		io_req->port_id = rport->port_id;
+		CMD_SP(sc) = (char *)io_req;
+	}
+	io_req->dr_done = &tm_done;
+	CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+	CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE;
+	spin_unlock_irqrestore(io_lock, flags);
+
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n",
+		      sc->request->tag);
+
+	/*
+	 * issue the device reset, if enqueue failed, clean up the ioreq
+	 * and break assoc with scsi cmd
+	 */
+	if (fnic_queue_dr_io_req(fnic, sc, io_req)) {
+		spin_lock_irqsave(io_lock, flags);
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		if (io_req)
+			io_req->dr_done = NULL;
+		goto fnic_device_reset_clean;
+	}
+
+	/*
+	 * Wait on the local completion for LUN reset.  The io_req may be
+	 * freed while we wait since we hold no lock.
+	 */
+	wait_for_completion_timeout(&tm_done,
+				    msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT));
+
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		goto fnic_device_reset_end;
+	}
+	io_req->dr_done = NULL;
+
+	status = CMD_LR_STATUS(sc);
+	spin_unlock_irqrestore(io_lock, flags);
+
+	/*
+	 * If lun reset not completed, bail out with failed. io_req
+	 * gets cleaned up during higher levels of EH
+	 */
+	if (status == FCPIO_INVALID_CODE) {
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "Device reset timed out\n");
+		goto fnic_device_reset_end;
+	}
+
+	/* Completed, but not successful, clean up the io_req, return fail */
+	if (status != FCPIO_SUCCESS) {
+		spin_lock_irqsave(io_lock, flags);
+		FNIC_SCSI_DBG(KERN_DEBUG,
+			      fnic->lport->host,
+			      "Device reset completed - failed\n");
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		goto fnic_device_reset_clean;
+	}
+
+	/*
+	 * Clean up any aborts on this lun that have still not
+	 * completed. If any of these fail, then LUN reset fails.
+	 * clean_pending_aborts cleans all cmds on this lun except
+	 * the lun reset cmd. If all cmds get cleaned, the lun reset
+	 * succeeds
+	 */
+	if (fnic_clean_pending_aborts(fnic, sc)) {
+		spin_lock_irqsave(io_lock, flags);
+		io_req = (struct fnic_io_req *)CMD_SP(sc);
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			      "Device reset failed"
+			      " since could not abort all IOs\n");
+		goto fnic_device_reset_clean;
+	}
+
+	/* Clean lun reset command */
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (io_req)
+		/* Completed, and successful */
+		ret = SUCCESS;
+
+fnic_device_reset_clean:
+	if (io_req)
+		CMD_SP(sc) = NULL;
+
+	spin_unlock_irqrestore(io_lock, flags);
+
+	if (io_req) {
+		fnic_release_ioreq_buf(fnic, io_req, sc);
+		mempool_free(io_req, fnic->io_req_pool);
+	}
+
+fnic_device_reset_end:
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "Returning from device reset %s\n",
+		      (ret == SUCCESS) ?
+		      "SUCCESS" : "FAILED");
+	return ret;
+}
+
+/* Clean up all IOs, clean up libFC local port */
+int fnic_reset(struct Scsi_Host *shost)
+{
+	struct fc_lport *lp;
+	struct fnic *fnic;
+	int ret = SUCCESS;
+
+	lp = shost_priv(shost);
+	fnic = lport_priv(lp);
+
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "fnic_reset called\n");
+
+	/*
+	 * Reset local port, this will clean up libFC exchanges,
+	 * reset remote port sessions, and if link is up, begin flogi
+	 */
+	if (lp->tt.lport_reset(lp))
+		ret = FAILED;
+
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "Returning from fnic reset %s\n",
+		      (ret == SUCCESS) ?
+		      "SUCCESS" : "FAILED");
+
+	return ret;
+}
+
+/*
+ * SCSI Error handling calls driver's eh_host_reset if all prior
+ * error handling levels return FAILED. If host reset completes
+ * successfully, and if link is up, then Fabric login begins.
+ *
+ * Host Reset is the highest level of error recovery. If this fails, then
+ * host is offlined by SCSI.
+ *
+ */
+int fnic_host_reset(struct scsi_cmnd *sc)
+{
+	int ret;
+	unsigned long wait_host_tmo;
+	struct Scsi_Host *shost = sc->device->host;
+	struct fc_lport *lp = shost_priv(shost);
+
+	/*
+	 * If fnic_reset is successful, wait for fabric login to complete
+	 * scsi-ml tries to send a TUR to every device if host reset is
+	 * successful, so before returning to scsi, fabric should be up
+	 */
+	ret = fnic_reset(shost);
+	if (ret == SUCCESS) {
+		wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ;
+		ret = FAILED;
+		while (time_before(jiffies, wait_host_tmo)) {
+			if ((lp->state == LPORT_ST_READY) &&
+			    (lp->link_up)) {
+				ret = SUCCESS;
+				break;
+			}
+			ssleep(1);
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * This fxn is called from libFC when host is removed
+ */
+void fnic_scsi_abort_io(struct fc_lport *lp)
+{
+	int err = 0;
+	unsigned long flags;
+	enum fnic_state old_state;
+	struct fnic *fnic = lport_priv(lp);
+	DECLARE_COMPLETION_ONSTACK(remove_wait);
+
+	/* Issue firmware reset for fnic, wait for reset to complete */
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	fnic->remove_wait = &remove_wait;
+	old_state = fnic->state;
+	fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+	vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	err = fnic_fw_reset_handler(fnic);
+	if (err) {
+		spin_lock_irqsave(&fnic->fnic_lock, flags);
+		if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+			fnic->state = old_state;
+		fnic->remove_wait = NULL;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+		return;
+	}
+
+	/* Wait for firmware reset to complete */
+	wait_for_completion_timeout(&remove_wait,
+				    msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT));
+
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	fnic->remove_wait = NULL;
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "fnic_scsi_abort_io %s\n",
+		      (fnic->state == FNIC_IN_ETH_MODE) ?
+		      "SUCCESS" : "FAILED");
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+}
+
+/*
+ * This fxn called from libFC to clean up driver IO state on link down
+ */
+void fnic_scsi_cleanup(struct fc_lport *lp)
+{
+	unsigned long flags;
+	enum fnic_state old_state;
+	struct fnic *fnic = lport_priv(lp);
+
+	/* issue fw reset */
+	spin_lock_irqsave(&fnic->fnic_lock, flags);
+	old_state = fnic->state;
+	fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+	vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+	spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+	if (fnic_fw_reset_handler(fnic)) {
+		spin_lock_irqsave(&fnic->fnic_lock, flags);
+		if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+			fnic->state = old_state;
+		spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+	}
+
+}
+
+void fnic_empty_scsi_cleanup(struct fc_lport *lp)
+{
+}
+
+void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
+{
+	struct fnic *fnic = lport_priv(lp);
+
+	/* Non-zero sid, nothing to do */
+	if (sid)
+		goto call_fc_exch_mgr_reset;
+
+	if (did) {
+		fnic_rport_exch_reset(fnic, did);
+		goto call_fc_exch_mgr_reset;
+	}
+
+	/*
+	 * sid = 0, did = 0
+	 * link down or device being removed
+	 */
+	if (!fnic->in_remove)
+		fnic_scsi_cleanup(lp);
+	else
+		fnic_scsi_abort_io(lp);
+
+	/* call libFC exch mgr reset to reset its exchanges */
+call_fc_exch_mgr_reset:
+	fc_exch_mgr_reset(lp, sid, did);
+
+}
diff --git a/drivers/scsi/fnic/rq_enet_desc.h b/drivers/scsi/fnic/rq_enet_desc.h
new file mode 100644
index 00000000000..92e80ae6b72
--- /dev/null
+++ b/drivers/scsi/fnic/rq_enet_desc.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _RQ_ENET_DESC_H_
+#define _RQ_ENET_DESC_H_
+
+/* Ethernet receive queue descriptor: 16B */
+struct rq_enet_desc {
+	__le64 address;
+	__le16 length_type;
+	u8 reserved[6];
+};
+
+enum rq_enet_type_types {
+	RQ_ENET_TYPE_ONLY_SOP = 0,
+	RQ_ENET_TYPE_NOT_SOP = 1,
+	RQ_ENET_TYPE_RESV2 = 2,
+	RQ_ENET_TYPE_RESV3 = 3,
+};
+
+#define RQ_ENET_ADDR_BITS		64
+#define RQ_ENET_LEN_BITS		14
+#define RQ_ENET_LEN_MASK		((1 << RQ_ENET_LEN_BITS) - 1)
+#define RQ_ENET_TYPE_BITS		2
+#define RQ_ENET_TYPE_MASK		((1 << RQ_ENET_TYPE_BITS) - 1)
+
+static inline void rq_enet_desc_enc(struct rq_enet_desc *desc,
+	u64 address, u8 type, u16 length)
+{
+	desc->address = cpu_to_le64(address);
+	desc->length_type = cpu_to_le16((length & RQ_ENET_LEN_MASK) |
+		((type & RQ_ENET_TYPE_MASK) << RQ_ENET_LEN_BITS));
+}
+
+static inline void rq_enet_desc_dec(struct rq_enet_desc *desc,
+	u64 *address, u8 *type, u16 *length)
+{
+	*address = le64_to_cpu(desc->address);
+	*length = le16_to_cpu(desc->length_type) & RQ_ENET_LEN_MASK;
+	*type = (u8)((le16_to_cpu(desc->length_type) >> RQ_ENET_LEN_BITS) &
+		RQ_ENET_TYPE_MASK);
+}
+
+#endif /* _RQ_ENET_DESC_H_ */
diff --git a/drivers/scsi/fnic/vnic_cq.c b/drivers/scsi/fnic/vnic_cq.c
new file mode 100644
index 00000000000..c5db32eda5e
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_cq.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+void vnic_cq_free(struct vnic_cq *cq)
+{
+	vnic_dev_free_desc_ring(cq->vdev, &cq->ring);
+
+	cq->ctrl = NULL;
+}
+
+int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
+	unsigned int desc_count, unsigned int desc_size)
+{
+	int err;
+
+	cq->index = index;
+	cq->vdev = vdev;
+
+	cq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_CQ, index);
+	if (!cq->ctrl) {
+		printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index);
+		return -EINVAL;
+	}
+
+	err = vnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
+	unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
+	unsigned int cq_tail_color, unsigned int interrupt_enable,
+	unsigned int cq_entry_enable, unsigned int cq_message_enable,
+	unsigned int interrupt_offset, u64 cq_message_addr)
+{
+	u64 paddr;
+
+	paddr = (u64)cq->ring.base_addr | VNIC_PADDR_TARGET;
+	writeq(paddr, &cq->ctrl->ring_base);
+	iowrite32(cq->ring.desc_count, &cq->ctrl->ring_size);
+	iowrite32(flow_control_enable, &cq->ctrl->flow_control_enable);
+	iowrite32(color_enable, &cq->ctrl->color_enable);
+	iowrite32(cq_head, &cq->ctrl->cq_head);
+	iowrite32(cq_tail, &cq->ctrl->cq_tail);
+	iowrite32(cq_tail_color, &cq->ctrl->cq_tail_color);
+	iowrite32(interrupt_enable, &cq->ctrl->interrupt_enable);
+	iowrite32(cq_entry_enable, &cq->ctrl->cq_entry_enable);
+	iowrite32(cq_message_enable, &cq->ctrl->cq_message_enable);
+	iowrite32(interrupt_offset, &cq->ctrl->interrupt_offset);
+	writeq(cq_message_addr, &cq->ctrl->cq_message_addr);
+}
+
+void vnic_cq_clean(struct vnic_cq *cq)
+{
+	cq->to_clean = 0;
+	cq->last_color = 0;
+
+	iowrite32(0, &cq->ctrl->cq_head);
+	iowrite32(0, &cq->ctrl->cq_tail);
+	iowrite32(1, &cq->ctrl->cq_tail_color);
+
+	vnic_dev_clear_desc_ring(&cq->ring);
+}
diff --git a/drivers/scsi/fnic/vnic_cq.h b/drivers/scsi/fnic/vnic_cq.h
new file mode 100644
index 00000000000..4ede6809fb1
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_cq.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_CQ_H_
+#define _VNIC_CQ_H_
+
+#include "cq_desc.h"
+#include "vnic_dev.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_cq_service fnic_cq_service
+#define vnic_cq_free fnic_cq_free
+#define vnic_cq_alloc fnic_cq_alloc
+#define vnic_cq_init fnic_cq_init
+#define vnic_cq_clean fnic_cq_clean
+
+/* Completion queue control */
+struct vnic_cq_ctrl {
+	u64 ring_base;			/* 0x00 */
+	u32 ring_size;			/* 0x08 */
+	u32 pad0;
+	u32 flow_control_enable;	/* 0x10 */
+	u32 pad1;
+	u32 color_enable;		/* 0x18 */
+	u32 pad2;
+	u32 cq_head;			/* 0x20 */
+	u32 pad3;
+	u32 cq_tail;			/* 0x28 */
+	u32 pad4;
+	u32 cq_tail_color;		/* 0x30 */
+	u32 pad5;
+	u32 interrupt_enable;		/* 0x38 */
+	u32 pad6;
+	u32 cq_entry_enable;		/* 0x40 */
+	u32 pad7;
+	u32 cq_message_enable;		/* 0x48 */
+	u32 pad8;
+	u32 interrupt_offset;		/* 0x50 */
+	u32 pad9;
+	u64 cq_message_addr;		/* 0x58 */
+	u32 pad10;
+};
+
+struct vnic_cq {
+	unsigned int index;
+	struct vnic_dev *vdev;
+	struct vnic_cq_ctrl __iomem *ctrl;	/* memory-mapped */
+	struct vnic_dev_ring ring;
+	unsigned int to_clean;
+	unsigned int last_color;
+};
+
+static inline unsigned int vnic_cq_service(struct vnic_cq *cq,
+	unsigned int work_to_do,
+	int (*q_service)(struct vnic_dev *vdev, struct cq_desc *cq_desc,
+	u8 type, u16 q_number, u16 completed_index, void *opaque),
+	void *opaque)
+{
+	struct cq_desc *cq_desc;
+	unsigned int work_done = 0;
+	u16 q_number, completed_index;
+	u8 type, color;
+
+	cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs +
+		cq->ring.desc_size * cq->to_clean);
+	cq_desc_dec(cq_desc, &type, &color,
+		&q_number, &completed_index);
+
+	while (color != cq->last_color) {
+
+		if ((*q_service)(cq->vdev, cq_desc, type,
+			q_number, completed_index, opaque))
+			break;
+
+		cq->to_clean++;
+		if (cq->to_clean == cq->ring.desc_count) {
+			cq->to_clean = 0;
+			cq->last_color = cq->last_color ? 0 : 1;
+		}
+
+		cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs +
+			cq->ring.desc_size * cq->to_clean);
+		cq_desc_dec(cq_desc, &type, &color,
+			&q_number, &completed_index);
+
+		work_done++;
+		if (work_done >= work_to_do)
+			break;
+	}
+
+	return work_done;
+}
+
+void vnic_cq_free(struct vnic_cq *cq);
+int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
+	unsigned int desc_count, unsigned int desc_size);
+void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
+	unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
+	unsigned int cq_tail_color, unsigned int interrupt_enable,
+	unsigned int cq_entry_enable, unsigned int message_enable,
+	unsigned int interrupt_offset, u64 message_addr);
+void vnic_cq_clean(struct vnic_cq *cq);
+
+#endif /* _VNIC_CQ_H_ */
diff --git a/drivers/scsi/fnic/vnic_cq_copy.h b/drivers/scsi/fnic/vnic_cq_copy.h
new file mode 100644
index 00000000000..7901ce255a8
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_cq_copy.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_CQ_COPY_H_
+#define _VNIC_CQ_COPY_H_
+
+#include "fcpio.h"
+
+static inline unsigned int vnic_cq_copy_service(
+	struct vnic_cq *cq,
+	int (*q_service)(struct vnic_dev *vdev,
+			 unsigned int index,
+			 struct fcpio_fw_req *desc),
+	unsigned int work_to_do)
+
+{
+	struct fcpio_fw_req *desc;
+	unsigned int work_done = 0;
+	u8 color;
+
+	desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs +
+		cq->ring.desc_size * cq->to_clean);
+	fcpio_color_dec(desc, &color);
+
+	while (color != cq->last_color) {
+
+		if ((*q_service)(cq->vdev, cq->index, desc))
+			break;
+
+		cq->to_clean++;
+		if (cq->to_clean == cq->ring.desc_count) {
+			cq->to_clean = 0;
+			cq->last_color = cq->last_color ? 0 : 1;
+		}
+
+		desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs +
+			cq->ring.desc_size * cq->to_clean);
+		fcpio_color_dec(desc, &color);
+
+		work_done++;
+		if (work_done >= work_to_do)
+			break;
+	}
+
+	return work_done;
+}
+
+#endif /* _VNIC_CQ_COPY_H_ */
diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
new file mode 100644
index 00000000000..56677064508
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -0,0 +1,690 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+#include "vnic_dev.h"
+#include "vnic_stats.h"
+
+struct vnic_res {
+	void __iomem *vaddr;
+	unsigned int count;
+};
+
+struct vnic_dev {
+	void *priv;
+	struct pci_dev *pdev;
+	struct vnic_res res[RES_TYPE_MAX];
+	enum vnic_dev_intr_mode intr_mode;
+	struct vnic_devcmd __iomem *devcmd;
+	struct vnic_devcmd_notify *notify;
+	struct vnic_devcmd_notify notify_copy;
+	dma_addr_t notify_pa;
+	u32 *linkstatus;
+	dma_addr_t linkstatus_pa;
+	struct vnic_stats *stats;
+	dma_addr_t stats_pa;
+	struct vnic_devcmd_fw_info *fw_info;
+	dma_addr_t fw_info_pa;
+};
+
+#define VNIC_MAX_RES_HDR_SIZE \
+	(sizeof(struct vnic_resource_header) + \
+	sizeof(struct vnic_resource) * RES_TYPE_MAX)
+#define VNIC_RES_STRIDE	128
+
+void *vnic_dev_priv(struct vnic_dev *vdev)
+{
+	return vdev->priv;
+}
+
+static int vnic_dev_discover_res(struct vnic_dev *vdev,
+	struct vnic_dev_bar *bar)
+{
+	struct vnic_resource_header __iomem *rh;
+	struct vnic_resource __iomem *r;
+	u8 type;
+
+	if (bar->len < VNIC_MAX_RES_HDR_SIZE) {
+		printk(KERN_ERR "vNIC BAR0 res hdr length error\n");
+		return -EINVAL;
+	}
+
+	rh = bar->vaddr;
+	if (!rh) {
+		printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n");
+		return -EINVAL;
+	}
+
+	if (ioread32(&rh->magic) != VNIC_RES_MAGIC ||
+	    ioread32(&rh->version) != VNIC_RES_VERSION) {
+		printk(KERN_ERR "vNIC BAR0 res magic/version error "
+			"exp (%lx/%lx) curr (%x/%x)\n",
+			VNIC_RES_MAGIC, VNIC_RES_VERSION,
+			ioread32(&rh->magic), ioread32(&rh->version));
+		return -EINVAL;
+	}
+
+	r = (struct vnic_resource __iomem *)(rh + 1);
+
+	while ((type = ioread8(&r->type)) != RES_TYPE_EOL) {
+
+		u8 bar_num = ioread8(&r->bar);
+		u32 bar_offset = ioread32(&r->bar_offset);
+		u32 count = ioread32(&r->count);
+		u32 len;
+
+		r++;
+
+		if (bar_num != 0)  /* only mapping in BAR0 resources */
+			continue;
+
+		switch (type) {
+		case RES_TYPE_WQ:
+		case RES_TYPE_RQ:
+		case RES_TYPE_CQ:
+		case RES_TYPE_INTR_CTRL:
+			/* each count is stride bytes long */
+			len = count * VNIC_RES_STRIDE;
+			if (len + bar_offset > bar->len) {
+				printk(KERN_ERR "vNIC BAR0 resource %d "
+					"out-of-bounds, offset 0x%x + "
+					"size 0x%x > bar len 0x%lx\n",
+					type, bar_offset,
+					len,
+					bar->len);
+				return -EINVAL;
+			}
+			break;
+		case RES_TYPE_INTR_PBA_LEGACY:
+		case RES_TYPE_DEVCMD:
+			len = count;
+			break;
+		default:
+			continue;
+		}
+
+		vdev->res[type].count = count;
+		vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset;
+	}
+
+	return 0;
+}
+
+unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev,
+	enum vnic_res_type type)
+{
+	return vdev->res[type].count;
+}
+
+void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
+	unsigned int index)
+{
+	if (!vdev->res[type].vaddr)
+		return NULL;
+
+	switch (type) {
+	case RES_TYPE_WQ:
+	case RES_TYPE_RQ:
+	case RES_TYPE_CQ:
+	case RES_TYPE_INTR_CTRL:
+		return (char __iomem *)vdev->res[type].vaddr +
+					index * VNIC_RES_STRIDE;
+	default:
+		return (char __iomem *)vdev->res[type].vaddr;
+	}
+}
+
+unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
+				     unsigned int desc_count,
+				     unsigned int desc_size)
+{
+	/* The base address of the desc rings must be 512 byte aligned.
+	 * Descriptor count is aligned to groups of 32 descriptors.  A
+	 * count of 0 means the maximum 4096 descriptors.  Descriptor
+	 * size is aligned to 16 bytes.
+	 */
+
+	unsigned int count_align = 32;
+	unsigned int desc_align = 16;
+
+	ring->base_align = 512;
+
+	if (desc_count == 0)
+		desc_count = 4096;
+
+	ring->desc_count = ALIGN(desc_count, count_align);
+
+	ring->desc_size = ALIGN(desc_size, desc_align);
+
+	ring->size = ring->desc_count * ring->desc_size;
+	ring->size_unaligned = ring->size + ring->base_align;
+
+	return ring->size_unaligned;
+}
+
+void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring)
+{
+	memset(ring->descs, 0, ring->size);
+}
+
+int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring,
+	unsigned int desc_count, unsigned int desc_size)
+{
+	vnic_dev_desc_ring_size(ring, desc_count, desc_size);
+
+	ring->descs_unaligned = pci_alloc_consistent(vdev->pdev,
+		ring->size_unaligned,
+		&ring->base_addr_unaligned);
+
+	if (!ring->descs_unaligned) {
+		printk(KERN_ERR
+		  "Failed to allocate ring (size=%d), aborting\n",
+			(int)ring->size);
+		return -ENOMEM;
+	}
+
+	ring->base_addr = ALIGN(ring->base_addr_unaligned,
+		ring->base_align);
+	ring->descs = (u8 *)ring->descs_unaligned +
+		(ring->base_addr - ring->base_addr_unaligned);
+
+	vnic_dev_clear_desc_ring(ring);
+
+	ring->desc_avail = ring->desc_count - 1;
+
+	return 0;
+}
+
+void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring)
+{
+	if (ring->descs) {
+		pci_free_consistent(vdev->pdev,
+			ring->size_unaligned,
+			ring->descs_unaligned,
+			ring->base_addr_unaligned);
+		ring->descs = NULL;
+	}
+}
+
+int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+	u64 *a0, u64 *a1, int wait)
+{
+	struct vnic_devcmd __iomem *devcmd = vdev->devcmd;
+	int delay;
+	u32 status;
+	int dev_cmd_err[] = {
+		/* convert from fw's version of error.h to host's version */
+		0,	/* ERR_SUCCESS */
+		EINVAL,	/* ERR_EINVAL */
+		EFAULT,	/* ERR_EFAULT */
+		EPERM,	/* ERR_EPERM */
+		EBUSY,  /* ERR_EBUSY */
+	};
+	int err;
+
+	status = ioread32(&devcmd->status);
+	if (status & STAT_BUSY) {
+		printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd));
+		return -EBUSY;
+	}
+
+	if (_CMD_DIR(cmd) & _CMD_DIR_WRITE) {
+		writeq(*a0, &devcmd->args[0]);
+		writeq(*a1, &devcmd->args[1]);
+		wmb();
+	}
+
+	iowrite32(cmd, &devcmd->cmd);
+
+	if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT))
+			return 0;
+
+	for (delay = 0; delay < wait; delay++) {
+
+		udelay(100);
+
+		status = ioread32(&devcmd->status);
+		if (!(status & STAT_BUSY)) {
+
+			if (status & STAT_ERROR) {
+				err = dev_cmd_err[(int)readq(&devcmd->args[0])];
+				printk(KERN_ERR "Error %d devcmd %d\n",
+					err, _CMD_N(cmd));
+				return -err;
+			}
+
+			if (_CMD_DIR(cmd) & _CMD_DIR_READ) {
+				rmb();
+				*a0 = readq(&devcmd->args[0]);
+				*a1 = readq(&devcmd->args[1]);
+			}
+
+			return 0;
+		}
+	}
+
+	printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd));
+	return -ETIMEDOUT;
+}
+
+int vnic_dev_fw_info(struct vnic_dev *vdev,
+	struct vnic_devcmd_fw_info **fw_info)
+{
+	u64 a0, a1 = 0;
+	int wait = 1000;
+	int err = 0;
+
+	if (!vdev->fw_info) {
+		vdev->fw_info = pci_alloc_consistent(vdev->pdev,
+			sizeof(struct vnic_devcmd_fw_info),
+			&vdev->fw_info_pa);
+		if (!vdev->fw_info)
+			return -ENOMEM;
+
+		a0 = vdev->fw_info_pa;
+
+		/* only get fw_info once and cache it */
+		err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait);
+	}
+
+	*fw_info = vdev->fw_info;
+
+	return err;
+}
+
+int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size,
+	void *value)
+{
+	u64 a0, a1;
+	int wait = 1000;
+	int err;
+
+	a0 = offset;
+	a1 = size;
+
+	err = vnic_dev_cmd(vdev, CMD_DEV_SPEC, &a0, &a1, wait);
+
+	switch (size) {
+	case 1:
+		*(u8 *)value = (u8)a0;
+		break;
+	case 2:
+		*(u16 *)value = (u16)a0;
+		break;
+	case 4:
+		*(u32 *)value = (u32)a0;
+		break;
+	case 8:
+		*(u64 *)value = a0;
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	return err;
+}
+
+int vnic_dev_stats_clear(struct vnic_dev *vdev)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_STATS_CLEAR, &a0, &a1, wait);
+}
+
+int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats)
+{
+	u64 a0, a1;
+	int wait = 1000;
+
+	if (!vdev->stats) {
+		vdev->stats = pci_alloc_consistent(vdev->pdev,
+			sizeof(struct vnic_stats), &vdev->stats_pa);
+		if (!vdev->stats)
+			return -ENOMEM;
+	}
+
+	*stats = vdev->stats;
+	a0 = vdev->stats_pa;
+	a1 = sizeof(struct vnic_stats);
+
+	return vnic_dev_cmd(vdev, CMD_STATS_DUMP, &a0, &a1, wait);
+}
+
+int vnic_dev_close(struct vnic_dev *vdev)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_CLOSE, &a0, &a1, wait);
+}
+
+int vnic_dev_enable(struct vnic_dev *vdev)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait);
+}
+
+int vnic_dev_disable(struct vnic_dev *vdev)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_DISABLE, &a0, &a1, wait);
+}
+
+int vnic_dev_open(struct vnic_dev *vdev, int arg)
+{
+	u64 a0 = (u32)arg, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_OPEN, &a0, &a1, wait);
+}
+
+int vnic_dev_open_done(struct vnic_dev *vdev, int *done)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	int err;
+
+	*done = 0;
+
+	err = vnic_dev_cmd(vdev, CMD_OPEN_STATUS, &a0, &a1, wait);
+	if (err)
+		return err;
+
+	*done = (a0 == 0);
+
+	return 0;
+}
+
+int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg)
+{
+	u64 a0 = (u32)arg, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_SOFT_RESET, &a0, &a1, wait);
+}
+
+int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	int err;
+
+	*done = 0;
+
+	err = vnic_dev_cmd(vdev, CMD_SOFT_RESET_STATUS, &a0, &a1, wait);
+	if (err)
+		return err;
+
+	*done = (a0 == 0);
+
+	return 0;
+}
+
+int vnic_dev_hang_notify(struct vnic_dev *vdev)
+{
+	u64 a0, a1;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait);
+}
+
+int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr)
+{
+	u64 a0, a1;
+	int wait = 1000;
+	int err, i;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		mac_addr[i] = 0;
+
+	err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait);
+	if (err)
+		return err;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		mac_addr[i] = ((u8 *)&a0)[i];
+
+	return 0;
+}
+
+void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
+	int broadcast, int promisc, int allmulti)
+{
+	u64 a0, a1 = 0;
+	int wait = 1000;
+	int err;
+
+	a0 = (directed ? CMD_PFILTER_DIRECTED : 0) |
+	     (multicast ? CMD_PFILTER_MULTICAST : 0) |
+	     (broadcast ? CMD_PFILTER_BROADCAST : 0) |
+	     (promisc ? CMD_PFILTER_PROMISCUOUS : 0) |
+	     (allmulti ? CMD_PFILTER_ALL_MULTICAST : 0);
+
+	err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait);
+	if (err)
+		printk(KERN_ERR "Can't set packet filter\n");
+}
+
+void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	int err;
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		((u8 *)&a0)[i] = addr[i];
+
+	err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait);
+	if (err)
+		printk(KERN_ERR
+			"Can't add addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n",
+			addr[0], addr[1], addr[2], addr[3], addr[4], addr[5],
+			err);
+}
+
+void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
+{
+	u64 a0 = 0, a1 = 0;
+	int wait = 1000;
+	int err;
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		((u8 *)&a0)[i] = addr[i];
+
+	err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait);
+	if (err)
+		printk(KERN_ERR
+			"Can't del addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n",
+			addr[0], addr[1], addr[2], addr[3], addr[4], addr[5],
+			err);
+}
+
+int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr)
+{
+	u64 a0, a1;
+	int wait = 1000;
+
+	if (!vdev->notify) {
+		vdev->notify = pci_alloc_consistent(vdev->pdev,
+			sizeof(struct vnic_devcmd_notify),
+			&vdev->notify_pa);
+		if (!vdev->notify)
+			return -ENOMEM;
+	}
+
+	a0 = vdev->notify_pa;
+	a1 = ((u64)intr << 32) & 0x0000ffff00000000ULL;
+	a1 += sizeof(struct vnic_devcmd_notify);
+
+	return vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait);
+}
+
+void vnic_dev_notify_unset(struct vnic_dev *vdev)
+{
+	u64 a0, a1;
+	int wait = 1000;
+
+	a0 = 0;  /* paddr = 0 to unset notify buffer */
+	a1 = 0x0000ffff00000000ULL; /* intr num = -1 to unreg for intr */
+	a1 += sizeof(struct vnic_devcmd_notify);
+
+	vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait);
+}
+
+static int vnic_dev_notify_ready(struct vnic_dev *vdev)
+{
+	u32 *words;
+	unsigned int nwords = sizeof(struct vnic_devcmd_notify) / 4;
+	unsigned int i;
+	u32 csum;
+
+	if (!vdev->notify)
+		return 0;
+
+	do {
+		csum = 0;
+		memcpy(&vdev->notify_copy, vdev->notify,
+			sizeof(struct vnic_devcmd_notify));
+		words = (u32 *)&vdev->notify_copy;
+		for (i = 1; i < nwords; i++)
+			csum += words[i];
+	} while (csum != words[0]);
+
+	return 1;
+}
+
+int vnic_dev_init(struct vnic_dev *vdev, int arg)
+{
+	u64 a0 = (u32)arg, a1 = 0;
+	int wait = 1000;
+	return vnic_dev_cmd(vdev, CMD_INIT, &a0, &a1, wait);
+}
+
+int vnic_dev_link_status(struct vnic_dev *vdev)
+{
+	if (vdev->linkstatus)
+		return *vdev->linkstatus;
+
+	if (!vnic_dev_notify_ready(vdev))
+		return 0;
+
+	return vdev->notify_copy.link_state;
+}
+
+u32 vnic_dev_port_speed(struct vnic_dev *vdev)
+{
+	if (!vnic_dev_notify_ready(vdev))
+		return 0;
+
+	return vdev->notify_copy.port_speed;
+}
+
+u32 vnic_dev_msg_lvl(struct vnic_dev *vdev)
+{
+	if (!vnic_dev_notify_ready(vdev))
+		return 0;
+
+	return vdev->notify_copy.msglvl;
+}
+
+u32 vnic_dev_mtu(struct vnic_dev *vdev)
+{
+	if (!vnic_dev_notify_ready(vdev))
+		return 0;
+
+	return vdev->notify_copy.mtu;
+}
+
+u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev)
+{
+	if (!vnic_dev_notify_ready(vdev))
+		return 0;
+
+	return vdev->notify_copy.link_down_cnt;
+}
+
+void vnic_dev_set_intr_mode(struct vnic_dev *vdev,
+	enum vnic_dev_intr_mode intr_mode)
+{
+	vdev->intr_mode = intr_mode;
+}
+
+enum vnic_dev_intr_mode vnic_dev_get_intr_mode(
+	struct vnic_dev *vdev)
+{
+	return vdev->intr_mode;
+}
+
+void vnic_dev_unregister(struct vnic_dev *vdev)
+{
+	if (vdev) {
+		if (vdev->notify)
+			pci_free_consistent(vdev->pdev,
+				sizeof(struct vnic_devcmd_notify),
+				vdev->notify,
+				vdev->notify_pa);
+		if (vdev->linkstatus)
+			pci_free_consistent(vdev->pdev,
+				sizeof(u32),
+				vdev->linkstatus,
+				vdev->linkstatus_pa);
+		if (vdev->stats)
+			pci_free_consistent(vdev->pdev,
+				sizeof(struct vnic_dev),
+				vdev->stats, vdev->stats_pa);
+		if (vdev->fw_info)
+			pci_free_consistent(vdev->pdev,
+				sizeof(struct vnic_devcmd_fw_info),
+				vdev->fw_info, vdev->fw_info_pa);
+		kfree(vdev);
+	}
+}
+
+struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
+	void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar)
+{
+	if (!vdev) {
+		vdev = kzalloc(sizeof(struct vnic_dev), GFP_KERNEL);
+		if (!vdev)
+			return NULL;
+	}
+
+	vdev->priv = priv;
+	vdev->pdev = pdev;
+
+	if (vnic_dev_discover_res(vdev, bar))
+		goto err_out;
+
+	vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0);
+	if (!vdev->devcmd)
+		goto err_out;
+
+	return vdev;
+
+err_out:
+	vnic_dev_unregister(vdev);
+	return NULL;
+}
diff --git a/drivers/scsi/fnic/vnic_dev.h b/drivers/scsi/fnic/vnic_dev.h
new file mode 100644
index 00000000000..f9935a8a5a0
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_dev.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_DEV_H_
+#define _VNIC_DEV_H_
+
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_dev_priv fnic_dev_priv
+#define vnic_dev_get_res_count fnic_dev_get_res_count
+#define vnic_dev_get_res fnic_dev_get_res
+#define vnic_dev_desc_ring_size fnic_dev_desc_ring_siz
+#define vnic_dev_clear_desc_ring fnic_dev_clear_desc_ring
+#define vnic_dev_alloc_desc_ring fnic_dev_alloc_desc_ring
+#define vnic_dev_free_desc_ring fnic_dev_free_desc_ring
+#define vnic_dev_cmd fnic_dev_cmd
+#define vnic_dev_fw_info fnic_dev_fw_info
+#define vnic_dev_spec fnic_dev_spec
+#define vnic_dev_stats_clear fnic_dev_stats_clear
+#define vnic_dev_stats_dump fnic_dev_stats_dump
+#define vnic_dev_hang_notify fnic_dev_hang_notify
+#define vnic_dev_packet_filter fnic_dev_packet_filter
+#define vnic_dev_add_addr fnic_dev_add_addr
+#define vnic_dev_del_addr fnic_dev_del_addr
+#define vnic_dev_mac_addr fnic_dev_mac_addr
+#define vnic_dev_notify_set fnic_dev_notify_set
+#define vnic_dev_notify_unset fnic_dev_notify_unset
+#define vnic_dev_link_status fnic_dev_link_status
+#define vnic_dev_port_speed fnic_dev_port_speed
+#define vnic_dev_msg_lvl fnic_dev_msg_lvl
+#define vnic_dev_mtu fnic_dev_mtu
+#define vnic_dev_link_down_cnt fnic_dev_link_down_cnt
+#define vnic_dev_close fnic_dev_close
+#define vnic_dev_enable fnic_dev_enable
+#define vnic_dev_disable fnic_dev_disable
+#define vnic_dev_open fnic_dev_open
+#define vnic_dev_open_done fnic_dev_open_done
+#define vnic_dev_init fnic_dev_init
+#define vnic_dev_soft_reset fnic_dev_soft_reset
+#define vnic_dev_soft_reset_done fnic_dev_soft_reset_done
+#define vnic_dev_set_intr_mode fnic_dev_set_intr_mode
+#define vnic_dev_get_intr_mode fnic_dev_get_intr_mode
+#define vnic_dev_unregister fnic_dev_unregister
+#define vnic_dev_register fnic_dev_register
+
+#ifndef VNIC_PADDR_TARGET
+#define VNIC_PADDR_TARGET	0x0000000000000000ULL
+#endif
+
+#ifndef readq
+static inline u64 readq(void __iomem *reg)
+{
+	return ((u64)readl(reg + 0x4UL) << 32) | (u64)readl(reg);
+}
+
+static inline void writeq(u64 val, void __iomem *reg)
+{
+	writel(val & 0xffffffff, reg);
+	writel(val >> 32, reg + 0x4UL);
+}
+#endif
+
+enum vnic_dev_intr_mode {
+	VNIC_DEV_INTR_MODE_UNKNOWN,
+	VNIC_DEV_INTR_MODE_INTX,
+	VNIC_DEV_INTR_MODE_MSI,
+	VNIC_DEV_INTR_MODE_MSIX,
+};
+
+struct vnic_dev_bar {
+	void __iomem *vaddr;
+	dma_addr_t bus_addr;
+	unsigned long len;
+};
+
+struct vnic_dev_ring {
+	void *descs;
+	size_t size;
+	dma_addr_t base_addr;
+	size_t base_align;
+	void *descs_unaligned;
+	size_t size_unaligned;
+	dma_addr_t base_addr_unaligned;
+	unsigned int desc_size;
+	unsigned int desc_count;
+	unsigned int desc_avail;
+};
+
+struct vnic_dev;
+struct vnic_stats;
+
+void *vnic_dev_priv(struct vnic_dev *vdev);
+unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev,
+				    enum vnic_res_type type);
+void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
+			       unsigned int index);
+unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
+				     unsigned int desc_count,
+				     unsigned int desc_size);
+void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring);
+int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring,
+			     unsigned int desc_count, unsigned int desc_size);
+void vnic_dev_free_desc_ring(struct vnic_dev *vdev,
+			     struct vnic_dev_ring *ring);
+int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+		 u64 *a0, u64 *a1, int wait);
+int vnic_dev_fw_info(struct vnic_dev *vdev,
+		     struct vnic_devcmd_fw_info **fw_info);
+int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset,
+		  unsigned int size, void *value);
+int vnic_dev_stats_clear(struct vnic_dev *vdev);
+int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats);
+int vnic_dev_hang_notify(struct vnic_dev *vdev);
+void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
+			    int broadcast, int promisc, int allmulti);
+void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr);
+void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr);
+int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr);
+int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr);
+void vnic_dev_notify_unset(struct vnic_dev *vdev);
+int vnic_dev_link_status(struct vnic_dev *vdev);
+u32 vnic_dev_port_speed(struct vnic_dev *vdev);
+u32 vnic_dev_msg_lvl(struct vnic_dev *vdev);
+u32 vnic_dev_mtu(struct vnic_dev *vdev);
+u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev);
+int vnic_dev_close(struct vnic_dev *vdev);
+int vnic_dev_enable(struct vnic_dev *vdev);
+int vnic_dev_disable(struct vnic_dev *vdev);
+int vnic_dev_open(struct vnic_dev *vdev, int arg);
+int vnic_dev_open_done(struct vnic_dev *vdev, int *done);
+int vnic_dev_init(struct vnic_dev *vdev, int arg);
+int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg);
+int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done);
+void vnic_dev_set_intr_mode(struct vnic_dev *vdev,
+			    enum vnic_dev_intr_mode intr_mode);
+enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev);
+void vnic_dev_unregister(struct vnic_dev *vdev);
+struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
+				   void *priv, struct pci_dev *pdev,
+				   struct vnic_dev_bar *bar);
+
+#endif /* _VNIC_DEV_H_ */
diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h
new file mode 100644
index 00000000000..d62b9061bf1
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_devcmd.h
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_DEVCMD_H_
+#define _VNIC_DEVCMD_H_
+
+#define _CMD_NBITS      14
+#define _CMD_VTYPEBITS	10
+#define _CMD_FLAGSBITS  6
+#define _CMD_DIRBITS	2
+
+#define _CMD_NMASK      ((1 << _CMD_NBITS)-1)
+#define _CMD_VTYPEMASK  ((1 << _CMD_VTYPEBITS)-1)
+#define _CMD_FLAGSMASK  ((1 << _CMD_FLAGSBITS)-1)
+#define _CMD_DIRMASK    ((1 << _CMD_DIRBITS)-1)
+
+#define _CMD_NSHIFT     0
+#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
+#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
+#define _CMD_DIRSHIFT   (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
+
+/*
+ * Direction bits (from host perspective).
+ */
+#define _CMD_DIR_NONE   0U
+#define _CMD_DIR_WRITE  1U
+#define _CMD_DIR_READ   2U
+#define _CMD_DIR_RW     (_CMD_DIR_WRITE | _CMD_DIR_READ)
+
+/*
+ * Flag bits.
+ */
+#define _CMD_FLAGS_NONE 0U
+#define _CMD_FLAGS_NOWAIT 1U
+
+/*
+ * vNIC type bits.
+ */
+#define _CMD_VTYPE_NONE  0U
+#define _CMD_VTYPE_ENET  1U
+#define _CMD_VTYPE_FC    2U
+#define _CMD_VTYPE_SCSI  4U
+#define _CMD_VTYPE_ALL   (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
+
+/*
+ * Used to create cmds..
+*/
+#define _CMDCF(dir, flags, vtype, nr)  \
+	(((dir)   << _CMD_DIRSHIFT) | \
+	((flags) << _CMD_FLAGSSHIFT) | \
+	((vtype) << _CMD_VTYPESHIFT) | \
+	((nr)    << _CMD_NSHIFT))
+#define _CMDC(dir, vtype, nr)    _CMDCF(dir, 0, vtype, nr)
+#define _CMDCNW(dir, vtype, nr)  _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
+
+/*
+ * Used to decode cmds..
+*/
+#define _CMD_DIR(cmd)            (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
+#define _CMD_FLAGS(cmd)          (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
+#define _CMD_VTYPE(cmd)          (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
+#define _CMD_N(cmd)              (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
+
+enum vnic_devcmd_cmd {
+	CMD_NONE                = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
+
+	/* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */
+	CMD_MCPU_FW_INFO        = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
+
+	/* dev-specific block member:
+	 *    in: (u16)a0=offset,(u8)a1=size
+	 *    out: a0=value */
+	CMD_DEV_SPEC            = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
+
+	/* stats clear */
+	CMD_STATS_CLEAR         = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
+
+	/* stats dump in mem: (u64)a0=paddr to stats area,
+	 *                    (u16)a1=sizeof stats area */
+	CMD_STATS_DUMP          = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
+
+	/* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
+	CMD_PACKET_FILTER	= _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
+
+	/* hang detection notification */
+	CMD_HANG_NOTIFY         = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
+
+	/* MAC address in (u48)a0 */
+	CMD_MAC_ADDR            = _CMDC(_CMD_DIR_READ,
+					_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
+
+	/* disable/enable promisc mode: (u8)a0=0/1 */
+/***** XXX DEPRECATED *****/
+	CMD_PROMISC_MODE        = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10),
+
+	/* disable/enable all-multi mode: (u8)a0=0/1 */
+/***** XXX DEPRECATED *****/
+	CMD_ALLMULTI_MODE       = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11),
+
+	/* add addr from (u48)a0 */
+	CMD_ADDR_ADD            = _CMDCNW(_CMD_DIR_WRITE,
+					_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
+
+	/* del addr from (u48)a0 */
+	CMD_ADDR_DEL            = _CMDCNW(_CMD_DIR_WRITE,
+					_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
+
+	/* add VLAN id in (u16)a0 */
+	CMD_VLAN_ADD            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
+
+	/* del VLAN id in (u16)a0 */
+	CMD_VLAN_DEL            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
+
+	/* nic_cfg in (u32)a0 */
+	CMD_NIC_CFG             = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
+
+	/* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
+	CMD_RSS_KEY             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
+
+	/* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
+	CMD_RSS_CPU             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
+
+	/* initiate softreset */
+	CMD_SOFT_RESET          = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
+
+	/* softreset status:
+	 *    out: a0=0 reset complete, a0=1 reset in progress */
+	CMD_SOFT_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
+
+	/* set struct vnic_devcmd_notify buffer in mem:
+	 * in:
+	 *   (u64)a0=paddr to notify (set paddr=0 to unset)
+	 *   (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
+	 *   (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
+	 * out:
+	 *   (u32)a1 = effective size
+	 */
+	CMD_NOTIFY              = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
+
+	/* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
+	 *           (u8)a1=PXENV_UNDI_xxx */
+	CMD_UNDI                = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
+
+	/* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
+	CMD_OPEN		= _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
+
+	/* open status:
+	 *    out: a0=0 open complete, a0=1 open in progress */
+	CMD_OPEN_STATUS		= _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
+
+	/* close vnic */
+	CMD_CLOSE		= _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
+
+	/* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
+	CMD_INIT		= _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
+
+	/* variant of CMD_INIT, with provisioning info
+	 *     (u64)a0=paddr of vnic_devcmd_provinfo
+	 *     (u32)a1=sizeof provision info */
+	CMD_INIT_PROV_INFO	= _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
+
+	/* enable virtual link */
+	CMD_ENABLE		= _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
+
+	/* disable virtual link */
+	CMD_DISABLE		= _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
+
+	/* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */
+	CMD_STATS_DUMP_ALL	= _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
+
+	/* init status:
+	 *    out: a0=0 init complete, a0=1 init in progress
+	 *         if a0=0, a1=errno */
+	CMD_INIT_STATUS		= _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
+
+	/* INT13 API: (u64)a0=paddr to vnic_int13_params struct
+	 *            (u8)a1=INT13_CMD_xxx */
+	CMD_INT13               = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
+
+	/* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
+	CMD_LOGICAL_UPLINK      = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
+
+	/* undo initialize of virtual link */
+	CMD_DEINIT		= _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
+};
+
+/* flags for CMD_OPEN */
+#define CMD_OPENF_OPROM		0x1	/* open coming from option rom */
+
+/* flags for CMD_INIT */
+#define CMD_INITF_DEFAULT_MAC	0x1	/* init with default mac addr */
+
+/* flags for CMD_PACKET_FILTER */
+#define CMD_PFILTER_DIRECTED		0x01
+#define CMD_PFILTER_MULTICAST		0x02
+#define CMD_PFILTER_BROADCAST		0x04
+#define CMD_PFILTER_PROMISCUOUS		0x08
+#define CMD_PFILTER_ALL_MULTICAST	0x10
+
+enum vnic_devcmd_status {
+	STAT_NONE = 0,
+	STAT_BUSY = 1 << 0,	/* cmd in progress */
+	STAT_ERROR = 1 << 1,	/* last cmd caused error (code in a0) */
+};
+
+enum vnic_devcmd_error {
+	ERR_SUCCESS = 0,
+	ERR_EINVAL = 1,
+	ERR_EFAULT = 2,
+	ERR_EPERM = 3,
+	ERR_EBUSY = 4,
+	ERR_ECMDUNKNOWN = 5,
+	ERR_EBADSTATE = 6,
+	ERR_ENOMEM = 7,
+	ERR_ETIMEDOUT = 8,
+	ERR_ELINKDOWN = 9,
+};
+
+struct vnic_devcmd_fw_info {
+	char fw_version[32];
+	char fw_build[32];
+	char hw_version[32];
+	char hw_serial_number[32];
+};
+
+struct vnic_devcmd_notify {
+	u32 csum;		/* checksum over following words */
+
+	u32 link_state;		/* link up == 1 */
+	u32 port_speed;		/* effective port speed (rate limit) */
+	u32 mtu;		/* MTU */
+	u32 msglvl;		/* requested driver msg lvl */
+	u32 uif;		/* uplink interface */
+	u32 status;		/* status bits (see VNIC_STF_*) */
+	u32 error;		/* error code (see ERR_*) for first ERR */
+	u32 link_down_cnt;	/* running count of link down transitions */
+};
+#define VNIC_STF_FATAL_ERR	0x0001	/* fatal fw error */
+
+struct vnic_devcmd_provinfo {
+	u8 oui[3];
+	u8 type;
+	u8 data[0];
+};
+
+/*
+ * Writing cmd register causes STAT_BUSY to get set in status register.
+ * When cmd completes, STAT_BUSY will be cleared.
+ *
+ * If cmd completed successfully STAT_ERROR will be clear
+ * and args registers contain cmd-specific results.
+ *
+ * If cmd error, STAT_ERROR will be set and args[0] contains error code.
+ *
+ * status register is read-only.  While STAT_BUSY is set,
+ * all other register contents are read-only.
+ */
+
+/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
+#define VNIC_DEVCMD_NARGS 15
+struct vnic_devcmd {
+	u32 status;			/* RO */
+	u32 cmd;			/* RW */
+	u64 args[VNIC_DEVCMD_NARGS];	/* RW cmd args (little-endian) */
+};
+
+#endif /* _VNIC_DEVCMD_H_ */
diff --git a/drivers/scsi/fnic/vnic_intr.c b/drivers/scsi/fnic/vnic_intr.c
new file mode 100644
index 00000000000..4f4dc8793d2
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_intr.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+
+void vnic_intr_free(struct vnic_intr *intr)
+{
+	intr->ctrl = NULL;
+}
+
+int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
+	unsigned int index)
+{
+	intr->index = index;
+	intr->vdev = vdev;
+
+	intr->ctrl = vnic_dev_get_res(vdev, RES_TYPE_INTR_CTRL, index);
+	if (!intr->ctrl) {
+		printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n",
+			index);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
+	unsigned int coalescing_type, unsigned int mask_on_assertion)
+{
+	iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer);
+	iowrite32(coalescing_type, &intr->ctrl->coalescing_type);
+	iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion);
+	iowrite32(0, &intr->ctrl->int_credits);
+}
+
+void vnic_intr_clean(struct vnic_intr *intr)
+{
+	iowrite32(0, &intr->ctrl->int_credits);
+}
diff --git a/drivers/scsi/fnic/vnic_intr.h b/drivers/scsi/fnic/vnic_intr.h
new file mode 100644
index 00000000000..d5fb40e7c98
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_intr.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_INTR_H_
+#define _VNIC_INTR_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_intr_unmask fnic_intr_unmask
+#define vnic_intr_mask fnic_intr_mask
+#define vnic_intr_return_credits fnic_intr_return_credits
+#define vnic_intr_credits fnic_intr_credits
+#define vnic_intr_return_all_credits fnic_intr_return_all_credits
+#define vnic_intr_legacy_pba fnic_intr_legacy_pba
+#define vnic_intr_free fnic_intr_free
+#define vnic_intr_alloc fnic_intr_alloc
+#define vnic_intr_init fnic_intr_init
+#define vnic_intr_clean fnic_intr_clean
+
+#define VNIC_INTR_TIMER_MAX		0xffff
+
+#define VNIC_INTR_TIMER_TYPE_ABS	0
+#define VNIC_INTR_TIMER_TYPE_QUIET	1
+
+/* Interrupt control */
+struct vnic_intr_ctrl {
+	u32 coalescing_timer;		/* 0x00 */
+	u32 pad0;
+	u32 coalescing_value;		/* 0x08 */
+	u32 pad1;
+	u32 coalescing_type;		/* 0x10 */
+	u32 pad2;
+	u32 mask_on_assertion;		/* 0x18 */
+	u32 pad3;
+	u32 mask;			/* 0x20 */
+	u32 pad4;
+	u32 int_credits;		/* 0x28 */
+	u32 pad5;
+	u32 int_credit_return;		/* 0x30 */
+	u32 pad6;
+};
+
+struct vnic_intr {
+	unsigned int index;
+	struct vnic_dev *vdev;
+	struct vnic_intr_ctrl __iomem *ctrl;	/* memory-mapped */
+};
+
+static inline void vnic_intr_unmask(struct vnic_intr *intr)
+{
+	iowrite32(0, &intr->ctrl->mask);
+}
+
+static inline void vnic_intr_mask(struct vnic_intr *intr)
+{
+	iowrite32(1, &intr->ctrl->mask);
+}
+
+static inline void vnic_intr_return_credits(struct vnic_intr *intr,
+	unsigned int credits, int unmask, int reset_timer)
+{
+#define VNIC_INTR_UNMASK_SHIFT		16
+#define VNIC_INTR_RESET_TIMER_SHIFT	17
+
+	u32 int_credit_return = (credits & 0xffff) |
+		(unmask ? (1 << VNIC_INTR_UNMASK_SHIFT) : 0) |
+		(reset_timer ? (1 << VNIC_INTR_RESET_TIMER_SHIFT) : 0);
+
+	iowrite32(int_credit_return, &intr->ctrl->int_credit_return);
+}
+
+static inline unsigned int vnic_intr_credits(struct vnic_intr *intr)
+{
+	return ioread32(&intr->ctrl->int_credits);
+}
+
+static inline void vnic_intr_return_all_credits(struct vnic_intr *intr)
+{
+	unsigned int credits = vnic_intr_credits(intr);
+	int unmask = 1;
+	int reset_timer = 1;
+
+	vnic_intr_return_credits(intr, credits, unmask, reset_timer);
+}
+
+static inline u32 vnic_intr_legacy_pba(u32 __iomem *legacy_pba)
+{
+	/* read PBA without clearing */
+	return ioread32(legacy_pba);
+}
+
+void vnic_intr_free(struct vnic_intr *intr);
+int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
+	unsigned int index);
+void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
+	unsigned int coalescing_type, unsigned int mask_on_assertion);
+void vnic_intr_clean(struct vnic_intr *intr);
+
+#endif /* _VNIC_INTR_H_ */
diff --git a/drivers/scsi/fnic/vnic_nic.h b/drivers/scsi/fnic/vnic_nic.h
new file mode 100644
index 00000000000..f15b83eeace
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_nic.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_NIC_H_
+#define _VNIC_NIC_H_
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_set_nic_cfg fnic_set_nic_cfg
+
+#define NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD	0xffUL
+#define NIC_CFG_RSS_DEFAULT_CPU_SHIFT		0
+#define NIC_CFG_RSS_HASH_TYPE			(0xffUL << 8)
+#define NIC_CFG_RSS_HASH_TYPE_MASK_FIELD	0xffUL
+#define NIC_CFG_RSS_HASH_TYPE_SHIFT		8
+#define NIC_CFG_RSS_HASH_BITS			(7UL << 16)
+#define NIC_CFG_RSS_HASH_BITS_MASK_FIELD	7UL
+#define NIC_CFG_RSS_HASH_BITS_SHIFT		16
+#define NIC_CFG_RSS_BASE_CPU			(7UL << 19)
+#define NIC_CFG_RSS_BASE_CPU_MASK_FIELD		7UL
+#define NIC_CFG_RSS_BASE_CPU_SHIFT		19
+#define NIC_CFG_RSS_ENABLE			(1UL << 22)
+#define NIC_CFG_RSS_ENABLE_MASK_FIELD		1UL
+#define NIC_CFG_RSS_ENABLE_SHIFT		22
+#define NIC_CFG_TSO_IPID_SPLIT_EN		(1UL << 23)
+#define NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD	1UL
+#define NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT		23
+#define NIC_CFG_IG_VLAN_STRIP_EN		(1UL << 24)
+#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD	1UL
+#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT		24
+
+static inline void vnic_set_nic_cfg(u32 *nic_cfg,
+	u8 rss_default_cpu, u8 rss_hash_type,
+	u8 rss_hash_bits, u8 rss_base_cpu,
+	u8 rss_enable, u8 tso_ipid_split_en,
+	u8 ig_vlan_strip_en)
+{
+	*nic_cfg = (rss_default_cpu & NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD) |
+		((rss_hash_type & NIC_CFG_RSS_HASH_TYPE_MASK_FIELD)
+			<< NIC_CFG_RSS_HASH_TYPE_SHIFT) |
+		((rss_hash_bits & NIC_CFG_RSS_HASH_BITS_MASK_FIELD)
+			<< NIC_CFG_RSS_HASH_BITS_SHIFT) |
+		((rss_base_cpu & NIC_CFG_RSS_BASE_CPU_MASK_FIELD)
+			<< NIC_CFG_RSS_BASE_CPU_SHIFT) |
+		((rss_enable & NIC_CFG_RSS_ENABLE_MASK_FIELD)
+			<< NIC_CFG_RSS_ENABLE_SHIFT) |
+		((tso_ipid_split_en & NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD)
+			<< NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT) |
+		((ig_vlan_strip_en & NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD)
+			<< NIC_CFG_IG_VLAN_STRIP_EN_SHIFT);
+}
+
+#endif /* _VNIC_NIC_H_ */
diff --git a/drivers/scsi/fnic/vnic_resource.h b/drivers/scsi/fnic/vnic_resource.h
new file mode 100644
index 00000000000..2d842f79d41
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_resource.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_RESOURCE_H_
+#define _VNIC_RESOURCE_H_
+
+#define VNIC_RES_MAGIC		0x766E6963L	/* 'vnic' */
+#define VNIC_RES_VERSION	0x00000000L
+
+/* vNIC resource types */
+enum vnic_res_type {
+	RES_TYPE_EOL,			/* End-of-list */
+	RES_TYPE_WQ,			/* Work queues */
+	RES_TYPE_RQ,			/* Receive queues */
+	RES_TYPE_CQ,			/* Completion queues */
+	RES_TYPE_RSVD1,
+	RES_TYPE_NIC_CFG,		/* Enet NIC config registers */
+	RES_TYPE_RSVD2,
+	RES_TYPE_RSVD3,
+	RES_TYPE_RSVD4,
+	RES_TYPE_RSVD5,
+	RES_TYPE_INTR_CTRL,		/* Interrupt ctrl table */
+	RES_TYPE_INTR_TABLE,		/* MSI/MSI-X Interrupt table */
+	RES_TYPE_INTR_PBA,		/* MSI/MSI-X PBA table */
+	RES_TYPE_INTR_PBA_LEGACY,	/* Legacy intr status */
+	RES_TYPE_RSVD6,
+	RES_TYPE_RSVD7,
+	RES_TYPE_DEVCMD,		/* Device command region */
+	RES_TYPE_PASS_THRU_PAGE,	/* Pass-thru page */
+
+	RES_TYPE_MAX,			/* Count of resource types */
+};
+
+struct vnic_resource_header {
+	u32 magic;
+	u32 version;
+};
+
+struct vnic_resource {
+	u8 type;
+	u8 bar;
+	u8 pad[2];
+	u32 bar_offset;
+	u32 count;
+};
+
+#endif /* _VNIC_RESOURCE_H_ */
diff --git a/drivers/scsi/fnic/vnic_rq.c b/drivers/scsi/fnic/vnic_rq.c
new file mode 100644
index 00000000000..bedd0d28563
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_rq.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_rq.h"
+
+static int vnic_rq_alloc_bufs(struct vnic_rq *rq)
+{
+	struct vnic_rq_buf *buf;
+	struct vnic_dev *vdev;
+	unsigned int i, j, count = rq->ring.desc_count;
+	unsigned int blks = VNIC_RQ_BUF_BLKS_NEEDED(count);
+
+	vdev = rq->vdev;
+
+	for (i = 0; i < blks; i++) {
+		rq->bufs[i] = kzalloc(VNIC_RQ_BUF_BLK_SZ, GFP_ATOMIC);
+		if (!rq->bufs[i]) {
+			printk(KERN_ERR "Failed to alloc rq_bufs\n");
+			return -ENOMEM;
+		}
+	}
+
+	for (i = 0; i < blks; i++) {
+		buf = rq->bufs[i];
+		for (j = 0; j < VNIC_RQ_BUF_BLK_ENTRIES; j++) {
+			buf->index = i * VNIC_RQ_BUF_BLK_ENTRIES + j;
+			buf->desc = (u8 *)rq->ring.descs +
+				rq->ring.desc_size * buf->index;
+			if (buf->index + 1 == count) {
+				buf->next = rq->bufs[0];
+				break;
+			} else if (j + 1 == VNIC_RQ_BUF_BLK_ENTRIES) {
+				buf->next = rq->bufs[i + 1];
+			} else {
+				buf->next = buf + 1;
+				buf++;
+			}
+		}
+	}
+
+	rq->to_use = rq->to_clean = rq->bufs[0];
+	rq->buf_index = 0;
+
+	return 0;
+}
+
+void vnic_rq_free(struct vnic_rq *rq)
+{
+	struct vnic_dev *vdev;
+	unsigned int i;
+
+	vdev = rq->vdev;
+
+	vnic_dev_free_desc_ring(vdev, &rq->ring);
+
+	for (i = 0; i < VNIC_RQ_BUF_BLKS_MAX; i++) {
+		kfree(rq->bufs[i]);
+		rq->bufs[i] = NULL;
+	}
+
+	rq->ctrl = NULL;
+}
+
+int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
+	unsigned int desc_count, unsigned int desc_size)
+{
+	int err;
+
+	rq->index = index;
+	rq->vdev = vdev;
+
+	rq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_RQ, index);
+	if (!rq->ctrl) {
+		printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index);
+		return -EINVAL;
+	}
+
+	vnic_rq_disable(rq);
+
+	err = vnic_dev_alloc_desc_ring(vdev, &rq->ring, desc_count, desc_size);
+	if (err)
+		return err;
+
+	err = vnic_rq_alloc_bufs(rq);
+	if (err) {
+		vnic_rq_free(rq);
+		return err;
+	}
+
+	return 0;
+}
+
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+	unsigned int error_interrupt_enable,
+	unsigned int error_interrupt_offset)
+{
+	u64 paddr;
+	u32 fetch_index;
+
+	paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET;
+	writeq(paddr, &rq->ctrl->ring_base);
+	iowrite32(rq->ring.desc_count, &rq->ctrl->ring_size);
+	iowrite32(cq_index, &rq->ctrl->cq_index);
+	iowrite32(error_interrupt_enable, &rq->ctrl->error_interrupt_enable);
+	iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset);
+	iowrite32(0, &rq->ctrl->dropped_packet_count);
+	iowrite32(0, &rq->ctrl->error_status);
+
+	/* Use current fetch_index as the ring starting point */
+	fetch_index = ioread32(&rq->ctrl->fetch_index);
+	rq->to_use = rq->to_clean =
+		&rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
+			[fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
+	iowrite32(fetch_index, &rq->ctrl->posted_index);
+
+	rq->buf_index = 0;
+}
+
+unsigned int vnic_rq_error_status(struct vnic_rq *rq)
+{
+	return ioread32(&rq->ctrl->error_status);
+}
+
+void vnic_rq_enable(struct vnic_rq *rq)
+{
+	iowrite32(1, &rq->ctrl->enable);
+}
+
+int vnic_rq_disable(struct vnic_rq *rq)
+{
+	unsigned int wait;
+
+	iowrite32(0, &rq->ctrl->enable);
+
+	/* Wait for HW to ACK disable request */
+	for (wait = 0; wait < 100; wait++) {
+		if (!(ioread32(&rq->ctrl->running)))
+			return 0;
+		udelay(1);
+	}
+
+	printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index);
+
+	return -ETIMEDOUT;
+}
+
+void vnic_rq_clean(struct vnic_rq *rq,
+	void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf))
+{
+	struct vnic_rq_buf *buf;
+	u32 fetch_index;
+
+	BUG_ON(ioread32(&rq->ctrl->enable));
+
+	buf = rq->to_clean;
+
+	while (vnic_rq_desc_used(rq) > 0) {
+
+		(*buf_clean)(rq, buf);
+
+		buf = rq->to_clean = buf->next;
+		rq->ring.desc_avail++;
+	}
+
+	/* Use current fetch_index as the ring starting point */
+	fetch_index = ioread32(&rq->ctrl->fetch_index);
+	rq->to_use = rq->to_clean =
+		&rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
+			[fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
+	iowrite32(fetch_index, &rq->ctrl->posted_index);
+
+	rq->buf_index = 0;
+
+	vnic_dev_clear_desc_ring(&rq->ring);
+}
+
diff --git a/drivers/scsi/fnic/vnic_rq.h b/drivers/scsi/fnic/vnic_rq.h
new file mode 100644
index 00000000000..aebdfbd6ad3
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_rq.h
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_RQ_H_
+#define _VNIC_RQ_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_rq_desc_avail fnic_rq_desc_avail
+#define vnic_rq_desc_used fnic_rq_desc_used
+#define vnic_rq_next_desc fnic_rq_next_desc
+#define vnic_rq_next_index fnic_rq_next_index
+#define vnic_rq_next_buf_index fnic_rq_next_buf_index
+#define vnic_rq_post fnic_rq_post
+#define vnic_rq_posting_soon fnic_rq_posting_soon
+#define vnic_rq_return_descs fnic_rq_return_descs
+#define vnic_rq_service fnic_rq_service
+#define vnic_rq_fill fnic_rq_fill
+#define vnic_rq_free fnic_rq_free
+#define vnic_rq_alloc fnic_rq_alloc
+#define vnic_rq_init fnic_rq_init
+#define vnic_rq_error_status fnic_rq_error_status
+#define vnic_rq_enable fnic_rq_enable
+#define vnic_rq_disable fnic_rq_disable
+#define vnic_rq_clean fnic_rq_clean
+
+/* Receive queue control */
+struct vnic_rq_ctrl {
+	u64 ring_base;			/* 0x00 */
+	u32 ring_size;			/* 0x08 */
+	u32 pad0;
+	u32 posted_index;		/* 0x10 */
+	u32 pad1;
+	u32 cq_index;			/* 0x18 */
+	u32 pad2;
+	u32 enable;			/* 0x20 */
+	u32 pad3;
+	u32 running;			/* 0x28 */
+	u32 pad4;
+	u32 fetch_index;		/* 0x30 */
+	u32 pad5;
+	u32 error_interrupt_enable;	/* 0x38 */
+	u32 pad6;
+	u32 error_interrupt_offset;	/* 0x40 */
+	u32 pad7;
+	u32 error_status;		/* 0x48 */
+	u32 pad8;
+	u32 dropped_packet_count;	/* 0x50 */
+	u32 pad9;
+	u32 dropped_packet_count_rc;	/* 0x58 */
+	u32 pad10;
+};
+
+/* Break the vnic_rq_buf allocations into blocks of 64 entries */
+#define VNIC_RQ_BUF_BLK_ENTRIES 64
+#define VNIC_RQ_BUF_BLK_SZ \
+	(VNIC_RQ_BUF_BLK_ENTRIES * sizeof(struct vnic_rq_buf))
+#define VNIC_RQ_BUF_BLKS_NEEDED(entries) \
+	DIV_ROUND_UP(entries, VNIC_RQ_BUF_BLK_ENTRIES)
+#define VNIC_RQ_BUF_BLKS_MAX VNIC_RQ_BUF_BLKS_NEEDED(4096)
+
+struct vnic_rq_buf {
+	struct vnic_rq_buf *next;
+	dma_addr_t dma_addr;
+	void *os_buf;
+	unsigned int os_buf_index;
+	unsigned int len;
+	unsigned int index;
+	void *desc;
+};
+
+struct vnic_rq {
+	unsigned int index;
+	struct vnic_dev *vdev;
+	struct vnic_rq_ctrl __iomem *ctrl;	/* memory-mapped */
+	struct vnic_dev_ring ring;
+	struct vnic_rq_buf *bufs[VNIC_RQ_BUF_BLKS_MAX];
+	struct vnic_rq_buf *to_use;
+	struct vnic_rq_buf *to_clean;
+	void *os_buf_head;
+	unsigned int buf_index;
+	unsigned int pkts_outstanding;
+};
+
+static inline unsigned int vnic_rq_desc_avail(struct vnic_rq *rq)
+{
+	/* how many does SW own? */
+	return rq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_rq_desc_used(struct vnic_rq *rq)
+{
+	/* how many does HW own? */
+	return rq->ring.desc_count - rq->ring.desc_avail - 1;
+}
+
+static inline void *vnic_rq_next_desc(struct vnic_rq *rq)
+{
+	return rq->to_use->desc;
+}
+
+static inline unsigned int vnic_rq_next_index(struct vnic_rq *rq)
+{
+	return rq->to_use->index;
+}
+
+static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq)
+{
+	return rq->buf_index++;
+}
+
+static inline void vnic_rq_post(struct vnic_rq *rq,
+	void *os_buf, unsigned int os_buf_index,
+	dma_addr_t dma_addr, unsigned int len)
+{
+	struct vnic_rq_buf *buf = rq->to_use;
+
+	buf->os_buf = os_buf;
+	buf->os_buf_index = os_buf_index;
+	buf->dma_addr = dma_addr;
+	buf->len = len;
+
+	buf = buf->next;
+	rq->to_use = buf;
+	rq->ring.desc_avail--;
+
+	/* Move the posted_index every nth descriptor
+	 */
+
+#ifndef VNIC_RQ_RETURN_RATE
+#define VNIC_RQ_RETURN_RATE		0xf	/* keep 2^n - 1 */
+#endif
+
+	if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) {
+		/* Adding write memory barrier prevents compiler and/or CPU
+		 * reordering, thus avoiding descriptor posting before
+		 * descriptor is initialized. Otherwise, hardware can read
+		 * stale descriptor fields.
+		 */
+		wmb();
+		iowrite32(buf->index, &rq->ctrl->posted_index);
+	}
+}
+
+static inline int vnic_rq_posting_soon(struct vnic_rq *rq)
+{
+	return (rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0;
+}
+
+static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count)
+{
+	rq->ring.desc_avail += count;
+}
+
+enum desc_return_options {
+	VNIC_RQ_RETURN_DESC,
+	VNIC_RQ_DEFER_RETURN_DESC,
+};
+
+static inline void vnic_rq_service(struct vnic_rq *rq,
+	struct cq_desc *cq_desc, u16 completed_index,
+	int desc_return, void (*buf_service)(struct vnic_rq *rq,
+	struct cq_desc *cq_desc, struct vnic_rq_buf *buf,
+	int skipped, void *opaque), void *opaque)
+{
+	struct vnic_rq_buf *buf;
+	int skipped;
+
+	buf = rq->to_clean;
+	while (1) {
+
+		skipped = (buf->index != completed_index);
+
+		(*buf_service)(rq, cq_desc, buf, skipped, opaque);
+
+		if (desc_return == VNIC_RQ_RETURN_DESC)
+			rq->ring.desc_avail++;
+
+		rq->to_clean = buf->next;
+
+		if (!skipped)
+			break;
+
+		buf = rq->to_clean;
+	}
+}
+
+static inline int vnic_rq_fill(struct vnic_rq *rq,
+	int (*buf_fill)(struct vnic_rq *rq))
+{
+	int err;
+
+	while (vnic_rq_desc_avail(rq) > 1) {
+
+		err = (*buf_fill)(rq);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+void vnic_rq_free(struct vnic_rq *rq);
+int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
+	unsigned int desc_count, unsigned int desc_size);
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+	unsigned int error_interrupt_enable,
+	unsigned int error_interrupt_offset);
+unsigned int vnic_rq_error_status(struct vnic_rq *rq);
+void vnic_rq_enable(struct vnic_rq *rq);
+int vnic_rq_disable(struct vnic_rq *rq);
+void vnic_rq_clean(struct vnic_rq *rq,
+	void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf));
+
+#endif /* _VNIC_RQ_H_ */
diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h
new file mode 100644
index 00000000000..46baa525400
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_scsi.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_SCSI_H_
+#define _VNIC_SCSI_H_
+
+#define VNIC_FNIC_WQ_COPY_COUNT_MIN         1
+#define VNIC_FNIC_WQ_COPY_COUNT_MAX         1
+
+#define VNIC_FNIC_WQ_DESCS_MIN              64
+#define VNIC_FNIC_WQ_DESCS_MAX              128
+
+#define VNIC_FNIC_WQ_COPY_DESCS_MIN         64
+#define VNIC_FNIC_WQ_COPY_DESCS_MAX         512
+
+#define VNIC_FNIC_RQ_DESCS_MIN              64
+#define VNIC_FNIC_RQ_DESCS_MAX              128
+
+#define VNIC_FNIC_EDTOV_MIN                 1000
+#define VNIC_FNIC_EDTOV_MAX                 255000
+#define VNIC_FNIC_EDTOV_DEF                 2000
+
+#define VNIC_FNIC_RATOV_MIN                 1000
+#define VNIC_FNIC_RATOV_MAX                 255000
+
+#define VNIC_FNIC_MAXDATAFIELDSIZE_MIN      256
+#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX      2112
+
+#define VNIC_FNIC_FLOGI_RETRIES_MIN         0
+#define VNIC_FNIC_FLOGI_RETRIES_MAX         0xffffffff
+#define VNIC_FNIC_FLOGI_RETRIES_DEF         0xffffffff
+
+#define VNIC_FNIC_FLOGI_TIMEOUT_MIN         1000
+#define VNIC_FNIC_FLOGI_TIMEOUT_MAX         255000
+
+#define VNIC_FNIC_PLOGI_RETRIES_MIN         0
+#define VNIC_FNIC_PLOGI_RETRIES_MAX         255
+#define VNIC_FNIC_PLOGI_RETRIES_DEF         8
+
+#define VNIC_FNIC_PLOGI_TIMEOUT_MIN         1000
+#define VNIC_FNIC_PLOGI_TIMEOUT_MAX         255000
+
+#define VNIC_FNIC_IO_THROTTLE_COUNT_MIN     256
+#define VNIC_FNIC_IO_THROTTLE_COUNT_MAX     4096
+
+#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MIN     0
+#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX     240000
+
+#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MIN     0
+#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX     240000
+
+#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MIN  0
+#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX  255
+
+#define VNIC_FNIC_LUNS_PER_TARGET_MIN       1
+#define VNIC_FNIC_LUNS_PER_TARGET_MAX       1024
+
+/* Device-specific region: scsi configuration */
+struct vnic_fc_config {
+	u64 node_wwn;
+	u64 port_wwn;
+	u32 flags;
+	u32 wq_enet_desc_count;
+	u32 wq_copy_desc_count;
+	u32 rq_desc_count;
+	u32 flogi_retries;
+	u32 flogi_timeout;
+	u32 plogi_retries;
+	u32 plogi_timeout;
+	u32 io_throttle_count;
+	u32 link_down_timeout;
+	u32 port_down_timeout;
+	u32 port_down_io_retries;
+	u32 luns_per_tgt;
+	u16 maxdatafieldsize;
+	u16 ed_tov;
+	u16 ra_tov;
+	u16 intr_timer;
+	u8 intr_timer_type;
+};
+
+#define VFCF_FCP_SEQ_LVL_ERR	0x1	/* Enable FCP-2 Error Recovery */
+#define VFCF_PERBI		0x2	/* persistent binding info available */
+
+#endif /* _VNIC_SCSI_H_ */
diff --git a/drivers/scsi/fnic/vnic_stats.h b/drivers/scsi/fnic/vnic_stats.h
new file mode 100644
index 00000000000..5372e23c1cb
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_stats.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_STATS_H_
+#define _VNIC_STATS_H_
+
+/* Tx statistics */
+struct vnic_tx_stats {
+	u64 tx_frames_ok;
+	u64 tx_unicast_frames_ok;
+	u64 tx_multicast_frames_ok;
+	u64 tx_broadcast_frames_ok;
+	u64 tx_bytes_ok;
+	u64 tx_unicast_bytes_ok;
+	u64 tx_multicast_bytes_ok;
+	u64 tx_broadcast_bytes_ok;
+	u64 tx_drops;
+	u64 tx_errors;
+	u64 tx_tso;
+	u64 rsvd[16];
+};
+
+/* Rx statistics */
+struct vnic_rx_stats {
+	u64 rx_frames_ok;
+	u64 rx_frames_total;
+	u64 rx_unicast_frames_ok;
+	u64 rx_multicast_frames_ok;
+	u64 rx_broadcast_frames_ok;
+	u64 rx_bytes_ok;
+	u64 rx_unicast_bytes_ok;
+	u64 rx_multicast_bytes_ok;
+	u64 rx_broadcast_bytes_ok;
+	u64 rx_drop;
+	u64 rx_no_bufs;
+	u64 rx_errors;
+	u64 rx_rss;
+	u64 rx_crc_errors;
+	u64 rx_frames_64;
+	u64 rx_frames_127;
+	u64 rx_frames_255;
+	u64 rx_frames_511;
+	u64 rx_frames_1023;
+	u64 rx_frames_1518;
+	u64 rx_frames_to_max;
+	u64 rsvd[16];
+};
+
+struct vnic_stats {
+	struct vnic_tx_stats tx;
+	struct vnic_rx_stats rx;
+};
+
+#endif /* _VNIC_STATS_H_ */
diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c
new file mode 100644
index 00000000000..1f9ea790d13
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+
+static int vnic_wq_alloc_bufs(struct vnic_wq *wq)
+{
+	struct vnic_wq_buf *buf;
+	struct vnic_dev *vdev;
+	unsigned int i, j, count = wq->ring.desc_count;
+	unsigned int blks = VNIC_WQ_BUF_BLKS_NEEDED(count);
+
+	vdev = wq->vdev;
+
+	for (i = 0; i < blks; i++) {
+		wq->bufs[i] = kzalloc(VNIC_WQ_BUF_BLK_SZ, GFP_ATOMIC);
+		if (!wq->bufs[i]) {
+			printk(KERN_ERR "Failed to alloc wq_bufs\n");
+			return -ENOMEM;
+		}
+	}
+
+	for (i = 0; i < blks; i++) {
+		buf = wq->bufs[i];
+		for (j = 0; j < VNIC_WQ_BUF_BLK_ENTRIES; j++) {
+			buf->index = i * VNIC_WQ_BUF_BLK_ENTRIES + j;
+			buf->desc = (u8 *)wq->ring.descs +
+				wq->ring.desc_size * buf->index;
+			if (buf->index + 1 == count) {
+				buf->next = wq->bufs[0];
+				break;
+			} else if (j + 1 == VNIC_WQ_BUF_BLK_ENTRIES) {
+				buf->next = wq->bufs[i + 1];
+			} else {
+				buf->next = buf + 1;
+				buf++;
+			}
+		}
+	}
+
+	wq->to_use = wq->to_clean = wq->bufs[0];
+
+	return 0;
+}
+
+void vnic_wq_free(struct vnic_wq *wq)
+{
+	struct vnic_dev *vdev;
+	unsigned int i;
+
+	vdev = wq->vdev;
+
+	vnic_dev_free_desc_ring(vdev, &wq->ring);
+
+	for (i = 0; i < VNIC_WQ_BUF_BLKS_MAX; i++) {
+		kfree(wq->bufs[i]);
+		wq->bufs[i] = NULL;
+	}
+
+	wq->ctrl = NULL;
+
+}
+
+int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
+	unsigned int desc_count, unsigned int desc_size)
+{
+	int err;
+
+	wq->index = index;
+	wq->vdev = vdev;
+
+	wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index);
+	if (!wq->ctrl) {
+		printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index);
+		return -EINVAL;
+	}
+
+	vnic_wq_disable(wq);
+
+	err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
+	if (err)
+		return err;
+
+	err = vnic_wq_alloc_bufs(wq);
+	if (err) {
+		vnic_wq_free(wq);
+		return err;
+	}
+
+	return 0;
+}
+
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+	unsigned int error_interrupt_enable,
+	unsigned int error_interrupt_offset)
+{
+	u64 paddr;
+
+	paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
+	writeq(paddr, &wq->ctrl->ring_base);
+	iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
+	iowrite32(0, &wq->ctrl->fetch_index);
+	iowrite32(0, &wq->ctrl->posted_index);
+	iowrite32(cq_index, &wq->ctrl->cq_index);
+	iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
+	iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
+	iowrite32(0, &wq->ctrl->error_status);
+}
+
+unsigned int vnic_wq_error_status(struct vnic_wq *wq)
+{
+	return ioread32(&wq->ctrl->error_status);
+}
+
+void vnic_wq_enable(struct vnic_wq *wq)
+{
+	iowrite32(1, &wq->ctrl->enable);
+}
+
+int vnic_wq_disable(struct vnic_wq *wq)
+{
+	unsigned int wait;
+
+	iowrite32(0, &wq->ctrl->enable);
+
+	/* Wait for HW to ACK disable request */
+	for (wait = 0; wait < 100; wait++) {
+		if (!(ioread32(&wq->ctrl->running)))
+			return 0;
+		udelay(1);
+	}
+
+	printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index);
+
+	return -ETIMEDOUT;
+}
+
+void vnic_wq_clean(struct vnic_wq *wq,
+	void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf))
+{
+	struct vnic_wq_buf *buf;
+
+	BUG_ON(ioread32(&wq->ctrl->enable));
+
+	buf = wq->to_clean;
+
+	while (vnic_wq_desc_used(wq) > 0) {
+
+		(*buf_clean)(wq, buf);
+
+		buf = wq->to_clean = buf->next;
+		wq->ring.desc_avail++;
+	}
+
+	wq->to_use = wq->to_clean = wq->bufs[0];
+
+	iowrite32(0, &wq->ctrl->fetch_index);
+	iowrite32(0, &wq->ctrl->posted_index);
+	iowrite32(0, &wq->ctrl->error_status);
+
+	vnic_dev_clear_desc_ring(&wq->ring);
+}
diff --git a/drivers/scsi/fnic/vnic_wq.h b/drivers/scsi/fnic/vnic_wq.h
new file mode 100644
index 00000000000..5cd094f7928
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_WQ_H_
+#define _VNIC_WQ_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_wq_desc_avail fnic_wq_desc_avail
+#define vnic_wq_desc_used fnic_wq_desc_used
+#define vnic_wq_next_desc fni_cwq_next_desc
+#define vnic_wq_post fnic_wq_post
+#define vnic_wq_service fnic_wq_service
+#define vnic_wq_free fnic_wq_free
+#define vnic_wq_alloc fnic_wq_alloc
+#define vnic_wq_init fnic_wq_init
+#define vnic_wq_error_status fnic_wq_error_status
+#define vnic_wq_enable fnic_wq_enable
+#define vnic_wq_disable fnic_wq_disable
+#define vnic_wq_clean fnic_wq_clean
+
+/* Work queue control */
+struct vnic_wq_ctrl {
+	u64 ring_base;			/* 0x00 */
+	u32 ring_size;			/* 0x08 */
+	u32 pad0;
+	u32 posted_index;		/* 0x10 */
+	u32 pad1;
+	u32 cq_index;			/* 0x18 */
+	u32 pad2;
+	u32 enable;			/* 0x20 */
+	u32 pad3;
+	u32 running;			/* 0x28 */
+	u32 pad4;
+	u32 fetch_index;		/* 0x30 */
+	u32 pad5;
+	u32 dca_value;			/* 0x38 */
+	u32 pad6;
+	u32 error_interrupt_enable;	/* 0x40 */
+	u32 pad7;
+	u32 error_interrupt_offset;	/* 0x48 */
+	u32 pad8;
+	u32 error_status;		/* 0x50 */
+	u32 pad9;
+};
+
+struct vnic_wq_buf {
+	struct vnic_wq_buf *next;
+	dma_addr_t dma_addr;
+	void *os_buf;
+	unsigned int len;
+	unsigned int index;
+	int sop;
+	void *desc;
+};
+
+/* Break the vnic_wq_buf allocations into blocks of 64 entries */
+#define VNIC_WQ_BUF_BLK_ENTRIES 64
+#define VNIC_WQ_BUF_BLK_SZ \
+	(VNIC_WQ_BUF_BLK_ENTRIES * sizeof(struct vnic_wq_buf))
+#define VNIC_WQ_BUF_BLKS_NEEDED(entries) \
+	DIV_ROUND_UP(entries, VNIC_WQ_BUF_BLK_ENTRIES)
+#define VNIC_WQ_BUF_BLKS_MAX VNIC_WQ_BUF_BLKS_NEEDED(4096)
+
+struct vnic_wq {
+	unsigned int index;
+	struct vnic_dev *vdev;
+	struct vnic_wq_ctrl __iomem *ctrl;	/* memory-mapped */
+	struct vnic_dev_ring ring;
+	struct vnic_wq_buf *bufs[VNIC_WQ_BUF_BLKS_MAX];
+	struct vnic_wq_buf *to_use;
+	struct vnic_wq_buf *to_clean;
+	unsigned int pkts_outstanding;
+};
+
+static inline unsigned int vnic_wq_desc_avail(struct vnic_wq *wq)
+{
+	/* how many does SW own? */
+	return wq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_wq_desc_used(struct vnic_wq *wq)
+{
+	/* how many does HW own? */
+	return wq->ring.desc_count - wq->ring.desc_avail - 1;
+}
+
+static inline void *vnic_wq_next_desc(struct vnic_wq *wq)
+{
+	return wq->to_use->desc;
+}
+
+static inline void vnic_wq_post(struct vnic_wq *wq,
+	void *os_buf, dma_addr_t dma_addr,
+	unsigned int len, int sop, int eop)
+{
+	struct vnic_wq_buf *buf = wq->to_use;
+
+	buf->sop = sop;
+	buf->os_buf = eop ? os_buf : NULL;
+	buf->dma_addr = dma_addr;
+	buf->len = len;
+
+	buf = buf->next;
+	if (eop) {
+		/* Adding write memory barrier prevents compiler and/or CPU
+		 * reordering, thus avoiding descriptor posting before
+		 * descriptor is initialized. Otherwise, hardware can read
+		 * stale descriptor fields.
+		 */
+		wmb();
+		iowrite32(buf->index, &wq->ctrl->posted_index);
+	}
+	wq->to_use = buf;
+
+	wq->ring.desc_avail--;
+}
+
+static inline void vnic_wq_service(struct vnic_wq *wq,
+	struct cq_desc *cq_desc, u16 completed_index,
+	void (*buf_service)(struct vnic_wq *wq,
+	struct cq_desc *cq_desc, struct vnic_wq_buf *buf, void *opaque),
+	void *opaque)
+{
+	struct vnic_wq_buf *buf;
+
+	buf = wq->to_clean;
+	while (1) {
+
+		(*buf_service)(wq, cq_desc, buf, opaque);
+
+		wq->ring.desc_avail++;
+
+		wq->to_clean = buf->next;
+
+		if (buf->index == completed_index)
+			break;
+
+		buf = wq->to_clean;
+	}
+}
+
+void vnic_wq_free(struct vnic_wq *wq);
+int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
+	unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+	unsigned int error_interrupt_enable,
+	unsigned int error_interrupt_offset);
+unsigned int vnic_wq_error_status(struct vnic_wq *wq);
+void vnic_wq_enable(struct vnic_wq *wq);
+int vnic_wq_disable(struct vnic_wq *wq);
+void vnic_wq_clean(struct vnic_wq *wq,
+	void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf));
+
+#endif /* _VNIC_WQ_H_ */
diff --git a/drivers/scsi/fnic/vnic_wq_copy.c b/drivers/scsi/fnic/vnic_wq_copy.c
new file mode 100644
index 00000000000..9eab7e7caf3
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq_copy.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_wq_copy.h"
+
+void vnic_wq_copy_enable(struct vnic_wq_copy *wq)
+{
+	iowrite32(1, &wq->ctrl->enable);
+}
+
+int vnic_wq_copy_disable(struct vnic_wq_copy *wq)
+{
+	unsigned int wait;
+
+	iowrite32(0, &wq->ctrl->enable);
+
+	/* Wait for HW to ACK disable request */
+	for (wait = 0; wait < 100; wait++) {
+		if (!(ioread32(&wq->ctrl->running)))
+			return 0;
+		udelay(1);
+	}
+
+	printk(KERN_ERR "Failed to disable Copy WQ[%d],"
+	       " fetch index=%d, posted_index=%d\n",
+	       wq->index, ioread32(&wq->ctrl->fetch_index),
+	       ioread32(&wq->ctrl->posted_index));
+
+	return -ENODEV;
+}
+
+void vnic_wq_copy_clean(struct vnic_wq_copy *wq,
+	void (*q_clean)(struct vnic_wq_copy *wq,
+	struct fcpio_host_req *wq_desc))
+{
+	BUG_ON(ioread32(&wq->ctrl->enable));
+
+	if (vnic_wq_copy_desc_in_use(wq))
+		vnic_wq_copy_service(wq, -1, q_clean);
+
+	wq->to_use_index = wq->to_clean_index = 0;
+
+	iowrite32(0, &wq->ctrl->fetch_index);
+	iowrite32(0, &wq->ctrl->posted_index);
+	iowrite32(0, &wq->ctrl->error_status);
+
+	vnic_dev_clear_desc_ring(&wq->ring);
+}
+
+void vnic_wq_copy_free(struct vnic_wq_copy *wq)
+{
+	struct vnic_dev *vdev;
+
+	vdev = wq->vdev;
+	vnic_dev_free_desc_ring(vdev, &wq->ring);
+	wq->ctrl = NULL;
+}
+
+int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
+		       unsigned int index, unsigned int desc_count,
+		       unsigned int desc_size)
+{
+	int err;
+
+	wq->index = index;
+	wq->vdev = vdev;
+	wq->to_use_index = wq->to_clean_index = 0;
+	wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index);
+	if (!wq->ctrl) {
+		printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index);
+		return -EINVAL;
+	}
+
+	vnic_wq_copy_disable(wq);
+
+	err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
+	unsigned int error_interrupt_enable,
+	unsigned int error_interrupt_offset)
+{
+	u64 paddr;
+
+	paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
+	writeq(paddr, &wq->ctrl->ring_base);
+	iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
+	iowrite32(0, &wq->ctrl->fetch_index);
+	iowrite32(0, &wq->ctrl->posted_index);
+	iowrite32(cq_index, &wq->ctrl->cq_index);
+	iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
+	iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
+}
+
diff --git a/drivers/scsi/fnic/vnic_wq_copy.h b/drivers/scsi/fnic/vnic_wq_copy.h
new file mode 100644
index 00000000000..6aff9740c3d
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq_copy.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_WQ_COPY_H_
+#define _VNIC_WQ_COPY_H_
+
+#include <linux/pci.h>
+#include "vnic_wq.h"
+#include "fcpio.h"
+
+#define	VNIC_WQ_COPY_MAX 1
+
+struct vnic_wq_copy {
+	unsigned int index;
+	struct vnic_dev *vdev;
+	struct vnic_wq_ctrl __iomem *ctrl;	/* memory-mapped */
+	struct vnic_dev_ring ring;
+	unsigned to_use_index;
+	unsigned to_clean_index;
+};
+
+static inline unsigned int vnic_wq_copy_desc_avail(struct vnic_wq_copy *wq)
+{
+	return wq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_wq_copy_desc_in_use(struct vnic_wq_copy *wq)
+{
+	return wq->ring.desc_count - 1 - wq->ring.desc_avail;
+}
+
+static inline void *vnic_wq_copy_next_desc(struct vnic_wq_copy *wq)
+{
+	struct fcpio_host_req *desc = wq->ring.descs;
+	return &desc[wq->to_use_index];
+}
+
+static inline void vnic_wq_copy_post(struct vnic_wq_copy *wq)
+{
+
+	((wq->to_use_index + 1) == wq->ring.desc_count) ?
+		(wq->to_use_index = 0) : (wq->to_use_index++);
+	wq->ring.desc_avail--;
+
+	/* Adding write memory barrier prevents compiler and/or CPU
+	 * reordering, thus avoiding descriptor posting before
+	 * descriptor is initialized. Otherwise, hardware can read
+	 * stale descriptor fields.
+	 */
+	wmb();
+
+	iowrite32(wq->to_use_index, &wq->ctrl->posted_index);
+}
+
+static inline void vnic_wq_copy_desc_process(struct vnic_wq_copy *wq, u16 index)
+{
+	unsigned int cnt;
+
+	if (wq->to_clean_index <= index)
+		cnt = (index - wq->to_clean_index) + 1;
+	else
+		cnt = wq->ring.desc_count - wq->to_clean_index + index + 1;
+
+	wq->to_clean_index = ((index + 1) % wq->ring.desc_count);
+	wq->ring.desc_avail += cnt;
+
+}
+
+static inline void vnic_wq_copy_service(struct vnic_wq_copy *wq,
+	u16 completed_index,
+	void (*q_service)(struct vnic_wq_copy *wq,
+	struct fcpio_host_req *wq_desc))
+{
+	struct fcpio_host_req *wq_desc = wq->ring.descs;
+	unsigned int curr_index;
+
+	while (1) {
+
+		if (q_service)
+			(*q_service)(wq, &wq_desc[wq->to_clean_index]);
+
+		wq->ring.desc_avail++;
+
+		curr_index = wq->to_clean_index;
+
+		/* increment the to-clean index so that we start
+		 * with an unprocessed index next time we enter the loop
+		 */
+		((wq->to_clean_index + 1) == wq->ring.desc_count) ?
+			(wq->to_clean_index = 0) : (wq->to_clean_index++);
+
+		if (curr_index == completed_index)
+			break;
+
+		/* we have cleaned all the entries */
+		if ((completed_index == (u16)-1) &&
+		    (wq->to_clean_index == wq->to_use_index))
+			break;
+	}
+}
+
+void vnic_wq_copy_enable(struct vnic_wq_copy *wq);
+int vnic_wq_copy_disable(struct vnic_wq_copy *wq);
+void vnic_wq_copy_free(struct vnic_wq_copy *wq);
+int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
+	unsigned int index, unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
+	unsigned int error_interrupt_enable,
+	unsigned int error_interrupt_offset);
+void vnic_wq_copy_clean(struct vnic_wq_copy *wq,
+	void (*q_clean)(struct vnic_wq_copy *wq,
+	struct fcpio_host_req *wq_desc));
+
+#endif /* _VNIC_WQ_COPY_H_ */
diff --git a/drivers/scsi/fnic/wq_enet_desc.h b/drivers/scsi/fnic/wq_enet_desc.h
new file mode 100644
index 00000000000..b121cbad18b
--- /dev/null
+++ b/drivers/scsi/fnic/wq_enet_desc.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _WQ_ENET_DESC_H_
+#define _WQ_ENET_DESC_H_
+
+/* Ethernet work queue descriptor: 16B */
+struct wq_enet_desc {
+	__le64 address;
+	__le16 length;
+	__le16 mss_loopback;
+	__le16 header_length_flags;
+	__le16 vlan_tag;
+};
+
+#define WQ_ENET_ADDR_BITS		64
+#define WQ_ENET_LEN_BITS		14
+#define WQ_ENET_LEN_MASK		((1 << WQ_ENET_LEN_BITS) - 1)
+#define WQ_ENET_MSS_BITS		14
+#define WQ_ENET_MSS_MASK		((1 << WQ_ENET_MSS_BITS) - 1)
+#define WQ_ENET_MSS_SHIFT		2
+#define WQ_ENET_LOOPBACK_SHIFT		1
+#define WQ_ENET_HDRLEN_BITS		10
+#define WQ_ENET_HDRLEN_MASK		((1 << WQ_ENET_HDRLEN_BITS) - 1)
+#define WQ_ENET_FLAGS_OM_BITS		2
+#define WQ_ENET_FLAGS_OM_MASK		((1 << WQ_ENET_FLAGS_OM_BITS) - 1)
+#define WQ_ENET_FLAGS_EOP_SHIFT		12
+#define WQ_ENET_FLAGS_CQ_ENTRY_SHIFT	13
+#define WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT	14
+#define WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT	15
+
+#define WQ_ENET_OFFLOAD_MODE_CSUM	0
+#define WQ_ENET_OFFLOAD_MODE_RESERVED	1
+#define WQ_ENET_OFFLOAD_MODE_CSUM_L4	2
+#define WQ_ENET_OFFLOAD_MODE_TSO	3
+
+static inline void wq_enet_desc_enc(struct wq_enet_desc *desc,
+	u64 address, u16 length, u16 mss, u16 header_length,
+	u8 offload_mode, u8 eop, u8 cq_entry, u8 fcoe_encap,
+	u8 vlan_tag_insert, u16 vlan_tag, u8 loopback)
+{
+	desc->address = cpu_to_le64(address);
+	desc->length = cpu_to_le16(length & WQ_ENET_LEN_MASK);
+	desc->mss_loopback = cpu_to_le16((mss & WQ_ENET_MSS_MASK) <<
+		WQ_ENET_MSS_SHIFT | (loopback & 1) << WQ_ENET_LOOPBACK_SHIFT);
+	desc->header_length_flags = cpu_to_le16(
+		(header_length & WQ_ENET_HDRLEN_MASK) |
+		(offload_mode & WQ_ENET_FLAGS_OM_MASK) << WQ_ENET_HDRLEN_BITS |
+		(eop & 1) << WQ_ENET_FLAGS_EOP_SHIFT |
+		(cq_entry & 1) << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT |
+		(fcoe_encap & 1) << WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT |
+		(vlan_tag_insert & 1) << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT);
+	desc->vlan_tag = cpu_to_le16(vlan_tag);
+}
+
+static inline void wq_enet_desc_dec(struct wq_enet_desc *desc,
+	u64 *address, u16 *length, u16 *mss, u16 *header_length,
+	u8 *offload_mode, u8 *eop, u8 *cq_entry, u8 *fcoe_encap,
+	u8 *vlan_tag_insert, u16 *vlan_tag, u8 *loopback)
+{
+	*address = le64_to_cpu(desc->address);
+	*length = le16_to_cpu(desc->length) & WQ_ENET_LEN_MASK;
+	*mss = (le16_to_cpu(desc->mss_loopback) >> WQ_ENET_MSS_SHIFT) &
+		WQ_ENET_MSS_MASK;
+	*loopback = (u8)((le16_to_cpu(desc->mss_loopback) >>
+		WQ_ENET_LOOPBACK_SHIFT) & 1);
+	*header_length = le16_to_cpu(desc->header_length_flags) &
+		WQ_ENET_HDRLEN_MASK;
+	*offload_mode = (u8)((le16_to_cpu(desc->header_length_flags) >>
+		WQ_ENET_HDRLEN_BITS) & WQ_ENET_FLAGS_OM_MASK);
+	*eop = (u8)((le16_to_cpu(desc->header_length_flags) >>
+		WQ_ENET_FLAGS_EOP_SHIFT) & 1);
+	*cq_entry = (u8)((le16_to_cpu(desc->header_length_flags) >>
+		WQ_ENET_FLAGS_CQ_ENTRY_SHIFT) & 1);
+	*fcoe_encap = (u8)((le16_to_cpu(desc->header_length_flags) >>
+		WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT) & 1);
+	*vlan_tag_insert = (u8)((le16_to_cpu(desc->header_length_flags) >>
+		WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT) & 1);
+	*vlan_tag = le16_to_cpu(desc->vlan_tag);
+}
+
+#endif /* _WQ_ENET_DESC_H_ */
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 59349a316e1..1258da34fbc 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -152,6 +152,7 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
                          struct Scsi_Host *host, gdth_ha_str *ha)
 {
     int size = 0,len = 0;
+    int hlen;
     off_t begin = 0,pos = 0;
     int id, i, j, k, sec, flag;
     int no_mdrv = 0, drv_no, is_mirr;
@@ -192,11 +193,11 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
     if (reserve_list[0] == 0xff)
         strcpy(hrec, "--");
     else {
-        sprintf(hrec, "%d", reserve_list[0]);
+        hlen = sprintf(hrec, "%d", reserve_list[0]);
         for (i = 1;  i < MAX_RES_ARGS; i++) {
             if (reserve_list[i] == 0xff) 
                 break;
-            sprintf(hrec,"%s,%d", hrec, reserve_list[i]);
+            hlen += snprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
         }
     }
     size = sprintf(buffer+len,
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ea4abee7a2a..b4b805e8d7d 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -110,7 +110,7 @@ static const struct {
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_DEAD, DID_ERROR, 0, 1, "transport dead" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_CONFIG_ERROR, DID_ERROR, 1, 1, "configuration error" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_NAME_SERVER_FAIL, DID_ERROR, 1, 1, "name server failure" },
-	{ IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 0, 0, "link halted" },
+	{ IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 1, 0, "link halted" },
 	{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_GENERAL, DID_OK, 1, 0, "general transport error" },
 
 	{ IBMVFC_VIOS_FAILURE, IBMVFC_CRQ_FAILURE, DID_REQUEUE, 1, 1, "CRQ failure" },
@@ -143,6 +143,7 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *);
 static void ibmvfc_tgt_send_prli(struct ibmvfc_target *);
 static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *);
 static void ibmvfc_tgt_query_target(struct ibmvfc_target *);
+static void ibmvfc_npiv_logout(struct ibmvfc_host *);
 
 static const char *unknown_error = "unknown error";
 
@@ -275,7 +276,7 @@ static int ibmvfc_get_err_result(struct ibmvfc_cmd *vfc_cmd)
 	int fc_rsp_len = rsp->fcp_rsp_len;
 
 	if ((rsp->flags & FCP_RSP_LEN_VALID) &&
-	    ((!fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
+	    ((fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
 	     rsp->data.info.rsp_code))
 		return DID_ERROR << 16;
 
@@ -431,6 +432,8 @@ static void ibmvfc_set_tgt_action(struct ibmvfc_target *tgt,
 	case IBMVFC_TGT_ACTION_DEL_RPORT:
 		break;
 	default:
+		if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
+			tgt->add_rport = 0;
 		tgt->action = action;
 		break;
 	}
@@ -475,6 +478,10 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 		if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT)
 			vhost->action = action;
 		break;
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
+		if (vhost->action == IBMVFC_HOST_ACTION_LOGO)
+			vhost->action = action;
+		break;
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
 		if (vhost->action == IBMVFC_HOST_ACTION_INIT)
 			vhost->action = action;
@@ -483,7 +490,7 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 		switch (vhost->action) {
 		case IBMVFC_HOST_ACTION_INIT_WAIT:
 		case IBMVFC_HOST_ACTION_NONE:
-		case IBMVFC_HOST_ACTION_TGT_ADD:
+		case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 			vhost->action = action;
 			break;
 		default:
@@ -494,11 +501,11 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 		if (vhost->action == IBMVFC_HOST_ACTION_ALLOC_TGTS)
 			vhost->action = action;
 		break;
+	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_QUERY_TGTS:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
-	case IBMVFC_HOST_ACTION_TGT_ADD:
 	case IBMVFC_HOST_ACTION_NONE:
 	default:
 		vhost->action = action;
@@ -576,7 +583,7 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
 		}
 
 		list_for_each_entry(tgt, &vhost->targets, queue)
-			tgt->need_login = 1;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		scsi_block_requests(vhost->host);
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
 		vhost->job_step = ibmvfc_npiv_login;
@@ -646,6 +653,7 @@ static void ibmvfc_release_crq_queue(struct ibmvfc_host *vhost)
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 
 	vhost->state = IBMVFC_NO_CRQ;
+	vhost->logged_in = 0;
 	dma_unmap_single(vhost->dev, crq->msg_token, PAGE_SIZE, DMA_BIDIRECTIONAL);
 	free_page((unsigned long)crq->msgs);
 }
@@ -692,6 +700,7 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 
 	vhost->state = IBMVFC_NO_CRQ;
+	vhost->logged_in = 0;
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
 
 	/* Clean out the queue */
@@ -807,10 +816,10 @@ static void ibmvfc_purge_requests(struct ibmvfc_host *vhost, int error_code)
 }
 
 /**
- * __ibmvfc_reset_host - Reset the connection to the server (no locking)
+ * ibmvfc_hard_reset_host - Reset the connection to the server by breaking the CRQ
  * @vhost:	struct ibmvfc host to reset
  **/
-static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+static void ibmvfc_hard_reset_host(struct ibmvfc_host *vhost)
 {
 	int rc;
 
@@ -826,9 +835,25 @@ static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
 }
 
 /**
- * ibmvfc_reset_host - Reset the connection to the server
+ * __ibmvfc_reset_host - Reset the connection to the server (no locking)
  * @vhost:	struct ibmvfc host to reset
  **/
+static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+{
+	if (vhost->logged_in && vhost->action != IBMVFC_HOST_ACTION_LOGO_WAIT &&
+	    !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+		scsi_block_requests(vhost->host);
+		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO);
+		vhost->job_step = ibmvfc_npiv_logout;
+		wake_up(&vhost->work_wait_q);
+	} else
+		ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_reset_host - Reset the connection to the server
+ * @vhost:	ibmvfc host struct
+ **/
 static void ibmvfc_reset_host(struct ibmvfc_host *vhost)
 {
 	unsigned long flags;
@@ -842,9 +867,13 @@ static void ibmvfc_reset_host(struct ibmvfc_host *vhost)
  * ibmvfc_retry_host_init - Retry host initialization if allowed
  * @vhost:	ibmvfc host struct
  *
+ * Returns: 1 if init will be retried / 0 if not
+ *
  **/
-static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
+static int ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 {
+	int retry = 0;
+
 	if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT) {
 		vhost->delay_init = 1;
 		if (++vhost->init_retries > IBMVFC_MAX_HOST_INIT_RETRIES) {
@@ -853,11 +882,14 @@ static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 			ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
 		} else if (vhost->init_retries == IBMVFC_MAX_HOST_INIT_RETRIES)
 			__ibmvfc_reset_host(vhost);
-		else
+		else {
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
+			retry = 1;
+		}
 	}
 
 	wake_up(&vhost->work_wait_q);
+	return retry;
 }
 
 /**
@@ -1137,8 +1169,9 @@ static void ibmvfc_set_login_info(struct ibmvfc_host *vhost)
 	login_info->partition_num = vhost->partition_number;
 	login_info->vfc_frame_version = 1;
 	login_info->fcp_version = 3;
+	login_info->flags = IBMVFC_FLUSH_ON_HALT;
 	if (vhost->client_migrated)
-		login_info->flags = IBMVFC_CLIENT_MIGRATED;
+		login_info->flags |= IBMVFC_CLIENT_MIGRATED;
 
 	login_info->max_cmds = max_requests + IBMVFC_NUM_INTERNAL_REQ;
 	login_info->capabilities = IBMVFC_CAN_MIGRATE;
@@ -1452,6 +1485,27 @@ static void ibmvfc_log_error(struct ibmvfc_event *evt)
 }
 
 /**
+ * ibmvfc_relogin - Log back into the specified device
+ * @sdev:	scsi device struct
+ *
+ **/
+static void ibmvfc_relogin(struct scsi_device *sdev)
+{
+	struct ibmvfc_host *vhost = shost_priv(sdev->host);
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	struct ibmvfc_target *tgt;
+
+	list_for_each_entry(tgt, &vhost->targets, queue) {
+		if (rport == tgt->rport) {
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+			break;
+		}
+	}
+
+	ibmvfc_reinit_host(vhost);
+}
+
+/**
  * ibmvfc_scsi_done - Handle responses from commands
  * @evt:	ibmvfc event to be handled
  *
@@ -1483,7 +1537,7 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
 				memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
 			if ((vfc_cmd->status & IBMVFC_VIOS_FAILURE) && (vfc_cmd->error == IBMVFC_PLOGI_REQUIRED))
-				ibmvfc_reinit_host(evt->vhost);
+				ibmvfc_relogin(cmnd->device);
 
 			if (!cmnd->result && (!scsi_get_resid(cmnd) || (rsp->flags & FCP_RESID_OVER)))
 				cmnd->result = (DID_ERROR << 16);
@@ -2148,13 +2202,31 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 				struct ibmvfc_host *vhost)
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
+	struct ibmvfc_target *tgt;
 
 	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
 		   " node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
-	case IBMVFC_AE_LINK_UP:
 	case IBMVFC_AE_RESUME:
+		switch (crq->link_state) {
+		case IBMVFC_AE_LS_LINK_DOWN:
+			ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+			break;
+		case IBMVFC_AE_LS_LINK_DEAD:
+			ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+			break;
+		case IBMVFC_AE_LS_LINK_UP:
+		case IBMVFC_AE_LS_LINK_BOUNCED:
+		default:
+			vhost->events_to_log |= IBMVFC_AE_LINKUP;
+			vhost->delay_init = 1;
+			__ibmvfc_reset_host(vhost);
+			break;
+		};
+
+		break;
+	case IBMVFC_AE_LINK_UP:
 		vhost->events_to_log |= IBMVFC_AE_LINKUP;
 		vhost->delay_init = 1;
 		__ibmvfc_reset_host(vhost);
@@ -2168,9 +2240,23 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 	case IBMVFC_AE_SCN_NPORT:
 	case IBMVFC_AE_SCN_GROUP:
 		vhost->events_to_log |= IBMVFC_AE_RSCN;
+		ibmvfc_reinit_host(vhost);
+		break;
 	case IBMVFC_AE_ELS_LOGO:
 	case IBMVFC_AE_ELS_PRLO:
 	case IBMVFC_AE_ELS_PLOGI:
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (!crq->scsi_id && !crq->wwpn && !crq->node_name)
+				break;
+			if (crq->scsi_id && tgt->scsi_id != crq->scsi_id)
+				continue;
+			if (crq->wwpn && tgt->ids.port_name != crq->wwpn)
+				continue;
+			if (crq->node_name && tgt->ids.node_name != crq->node_name)
+				continue;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+		}
+
 		ibmvfc_reinit_host(vhost);
 		break;
 	case IBMVFC_AE_LINK_DOWN:
@@ -2222,6 +2308,7 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
 		return;
 	case IBMVFC_CRQ_XPORT_EVENT:
 		vhost->state = IBMVFC_NO_CRQ;
+		vhost->logged_in = 0;
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
 		if (crq->format == IBMVFC_PARTITION_MIGRATED) {
 			/* We need to re-setup the interpartition connection */
@@ -2299,7 +2386,7 @@ static int ibmvfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
 		done = 1;
 	}
 
-	if (vhost->state != IBMVFC_NO_CRQ && vhost->action == IBMVFC_HOST_ACTION_NONE)
+	if (vhost->scan_complete)
 		done = 1;
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	return done;
@@ -2434,14 +2521,6 @@ static ssize_t ibmvfc_show_host_partition_name(struct device *dev,
 			vhost->login_buf->resp.partition_name);
 }
 
-static struct device_attribute ibmvfc_host_partition_name = {
-	.attr = {
-		.name = "partition_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_partition_name,
-};
-
 static ssize_t ibmvfc_show_host_device_name(struct device *dev,
 					    struct device_attribute *attr, char *buf)
 {
@@ -2452,14 +2531,6 @@ static ssize_t ibmvfc_show_host_device_name(struct device *dev,
 			vhost->login_buf->resp.device_name);
 }
 
-static struct device_attribute ibmvfc_host_device_name = {
-	.attr = {
-		.name = "device_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_device_name,
-};
-
 static ssize_t ibmvfc_show_host_loc_code(struct device *dev,
 					 struct device_attribute *attr, char *buf)
 {
@@ -2470,14 +2541,6 @@ static ssize_t ibmvfc_show_host_loc_code(struct device *dev,
 			vhost->login_buf->resp.port_loc_code);
 }
 
-static struct device_attribute ibmvfc_host_loc_code = {
-	.attr = {
-		.name = "port_loc_code",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_loc_code,
-};
-
 static ssize_t ibmvfc_show_host_drc_name(struct device *dev,
 					 struct device_attribute *attr, char *buf)
 {
@@ -2488,14 +2551,6 @@ static ssize_t ibmvfc_show_host_drc_name(struct device *dev,
 			vhost->login_buf->resp.drc_name);
 }
 
-static struct device_attribute ibmvfc_host_drc_name = {
-	.attr = {
-		.name = "drc_name",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_drc_name,
-};
-
 static ssize_t ibmvfc_show_host_npiv_version(struct device *dev,
 					     struct device_attribute *attr, char *buf)
 {
@@ -2504,13 +2559,13 @@ static ssize_t ibmvfc_show_host_npiv_version(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "%d\n", vhost->login_buf->resp.version);
 }
 
-static struct device_attribute ibmvfc_host_npiv_version = {
-	.attr = {
-		.name = "npiv_version",
-		.mode = S_IRUGO,
-	},
-	.show = ibmvfc_show_host_npiv_version,
-};
+static ssize_t ibmvfc_show_host_capabilities(struct device *dev,
+					     struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvfc_host *vhost = shost_priv(shost);
+	return snprintf(buf, PAGE_SIZE, "%llx\n", vhost->login_buf->resp.capabilities);
+}
 
 /**
  * ibmvfc_show_log_level - Show the adapter's error logging level
@@ -2556,14 +2611,14 @@ static ssize_t ibmvfc_store_log_level(struct device *dev,
 	return strlen(buf);
 }
 
-static struct device_attribute ibmvfc_log_level_attr = {
-	.attr = {
-		.name =		"log_level",
-		.mode =		S_IRUGO | S_IWUSR,
-	},
-	.show = ibmvfc_show_log_level,
-	.store = ibmvfc_store_log_level
-};
+static DEVICE_ATTR(partition_name, S_IRUGO, ibmvfc_show_host_partition_name, NULL);
+static DEVICE_ATTR(device_name, S_IRUGO, ibmvfc_show_host_device_name, NULL);
+static DEVICE_ATTR(port_loc_code, S_IRUGO, ibmvfc_show_host_loc_code, NULL);
+static DEVICE_ATTR(drc_name, S_IRUGO, ibmvfc_show_host_drc_name, NULL);
+static DEVICE_ATTR(npiv_version, S_IRUGO, ibmvfc_show_host_npiv_version, NULL);
+static DEVICE_ATTR(capabilities, S_IRUGO, ibmvfc_show_host_capabilities, NULL);
+static DEVICE_ATTR(log_level, S_IRUGO | S_IWUSR,
+		   ibmvfc_show_log_level, ibmvfc_store_log_level);
 
 #ifdef CONFIG_SCSI_IBMVFC_TRACE
 /**
@@ -2612,12 +2667,13 @@ static struct bin_attribute ibmvfc_trace_attr = {
 #endif
 
 static struct device_attribute *ibmvfc_attrs[] = {
-	&ibmvfc_host_partition_name,
-	&ibmvfc_host_device_name,
-	&ibmvfc_host_loc_code,
-	&ibmvfc_host_drc_name,
-	&ibmvfc_host_npiv_version,
-	&ibmvfc_log_level_attr,
+	&dev_attr_partition_name,
+	&dev_attr_device_name,
+	&dev_attr_port_loc_code,
+	&dev_attr_drc_name,
+	&dev_attr_npiv_version,
+	&dev_attr_capabilities,
+	&dev_attr_log_level,
 	NULL
 };
 
@@ -2774,15 +2830,19 @@ static void ibmvfc_init_tgt(struct ibmvfc_target *tgt,
  * @tgt:		ibmvfc target struct
  * @job_step:	initialization job step
  *
+ * Returns: 1 if step will be retried / 0 if not
+ *
  **/
-static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
+static int ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
 				  void (*job_step) (struct ibmvfc_target *))
 {
 	if (++tgt->init_retries > IBMVFC_MAX_TGT_INIT_RETRIES) {
 		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		wake_up(&tgt->vhost->work_wait_q);
+		return 0;
 	} else
 		ibmvfc_init_tgt(tgt, job_step);
+	return 1;
 }
 
 /* Defined in FC-LS */
@@ -2831,7 +2891,7 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 	struct ibmvfc_process_login *rsp = &evt->xfer_iu->prli;
 	struct ibmvfc_prli_svc_parms *parms = &rsp->parms;
 	u32 status = rsp->common.status;
-	int index;
+	int index, level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2850,7 +2910,7 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_TARGET;
 					if (parms->service_parms & IBMVFC_PRLI_INITIATOR_FUNC)
 						tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR;
-					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT);
+					tgt->add_rport = 1;
 				} else
 					ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 			} else if (prli_rsp[index].retry)
@@ -2867,13 +2927,14 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error),
-			rsp->status, rsp->error, status);
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error),
+			rsp->status, rsp->error, status);
 		break;
 	};
 
@@ -2932,6 +2993,7 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt)
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_port_login *rsp = &evt->xfer_iu->plogi;
 	u32 status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2960,15 +3022,15 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
-			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
-			ibmvfc_get_ls_explain(rsp->fc_explain), rsp->fc_explain, status);
-
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
+			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
+			ibmvfc_get_ls_explain(rsp->fc_explain), rsp->fc_explain, status);
 		break;
 	};
 
@@ -3129,13 +3191,13 @@ static void ibmvfc_tgt_adisc_done(struct ibmvfc_event *evt)
 	case IBMVFC_MAD_SUCCESS:
 		tgt_dbg(tgt, "ADISC succeeded\n");
 		if (ibmvfc_adisc_needs_plogi(mad, tgt))
-			tgt->need_login = 1;
+			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt->need_login = 1;
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		fc_reason = (mad->fc_iu.response[1] & 0x00ff0000) >> 16;
 		fc_explain = (mad->fc_iu.response[1] & 0x0000ff00) >> 8;
 		tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
@@ -3322,6 +3384,7 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_query_tgt *rsp = &evt->xfer_iu->query_tgt;
 	u32 status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	vhost->discovery_threads--;
 	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -3341,19 +3404,19 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 		break;
 	case IBMVFC_MAD_FAILED:
 	default:
-		tgt_err(tgt, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
-			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
-			ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
-
 		if ((rsp->status & IBMVFC_FABRIC_MAPPED) == IBMVFC_FABRIC_MAPPED &&
 		    rsp->error == IBMVFC_UNABLE_TO_PERFORM_REQ &&
 		    rsp->fc_explain == IBMVFC_PORT_NAME_NOT_REG)
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
 		else if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
+			level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
 		else
 			ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+		tgt_log(tgt, level, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
+			ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
+			ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
 		break;
 	};
 
@@ -3420,7 +3483,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id)
 	}
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
 
-	tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
+	tgt = mempool_alloc(vhost->tgt_pool, GFP_NOIO);
 	if (!tgt) {
 		dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
 			scsi_id);
@@ -3472,6 +3535,7 @@ static void ibmvfc_discover_targets_done(struct ibmvfc_event *evt)
 	struct ibmvfc_host *vhost = evt->vhost;
 	struct ibmvfc_discover_targets *rsp = &evt->xfer_iu->discover_targets;
 	u32 mad_status = rsp->common.status;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	switch (mad_status) {
 	case IBMVFC_MAD_SUCCESS:
@@ -3480,9 +3544,9 @@ static void ibmvfc_discover_targets_done(struct ibmvfc_event *evt)
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_ALLOC_TGTS);
 		break;
 	case IBMVFC_MAD_FAILED:
-		dev_err(vhost->dev, "Discover Targets failed: %s (%x:%x)\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
-		ibmvfc_retry_host_init(vhost);
+		level += ibmvfc_retry_host_init(vhost);
+		ibmvfc_log(vhost, level, "Discover Targets failed: %s (%x:%x)\n",
+			   ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
@@ -3534,18 +3598,19 @@ static void ibmvfc_npiv_login_done(struct ibmvfc_event *evt)
 	u32 mad_status = evt->xfer_iu->npiv_login.common.status;
 	struct ibmvfc_npiv_login_resp *rsp = &vhost->login_buf->resp;
 	unsigned int npiv_max_sectors;
+	int level = IBMVFC_DEFAULT_LOG_LEVEL;
 
 	switch (mad_status) {
 	case IBMVFC_MAD_SUCCESS:
 		ibmvfc_free_event(evt);
 		break;
 	case IBMVFC_MAD_FAILED:
-		dev_err(vhost->dev, "NPIV Login failed: %s (%x:%x)\n",
-			ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		if (ibmvfc_retry_cmd(rsp->status, rsp->error))
-			ibmvfc_retry_host_init(vhost);
+			level += ibmvfc_retry_host_init(vhost);
 		else
 			ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+		ibmvfc_log(vhost, level, "NPIV Login failed: %s (%x:%x)\n",
+			   ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
 		ibmvfc_free_event(evt);
 		return;
 	case IBMVFC_MAD_CRQ_ERROR:
@@ -3578,6 +3643,7 @@ static void ibmvfc_npiv_login_done(struct ibmvfc_event *evt)
 		return;
 	}
 
+	vhost->logged_in = 1;
 	npiv_max_sectors = min((uint)(rsp->max_dma_len >> 9), IBMVFC_MAX_SECTORS);
 	dev_info(vhost->dev, "Host partition: %s, device: %s %s %s max sectors %u\n",
 		 rsp->partition_name, rsp->device_name, rsp->port_loc_code,
@@ -3636,6 +3702,65 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost)
 };
 
 /**
+ * ibmvfc_npiv_logout_done - Completion handler for NPIV Logout
+ * @vhost:		ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout_done(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_host *vhost = evt->vhost;
+	u32 mad_status = evt->xfer_iu->npiv_logout.common.status;
+
+	ibmvfc_free_event(evt);
+
+	switch (mad_status) {
+	case IBMVFC_MAD_SUCCESS:
+		if (list_empty(&vhost->sent) &&
+		    vhost->action == IBMVFC_HOST_ACTION_LOGO_WAIT) {
+			ibmvfc_init_host(vhost, 0);
+			return;
+		}
+		break;
+	case IBMVFC_MAD_FAILED:
+	case IBMVFC_MAD_NOT_SUPPORTED:
+	case IBMVFC_MAD_CRQ_ERROR:
+	case IBMVFC_MAD_DRIVER_FAILED:
+	default:
+		ibmvfc_dbg(vhost, "NPIV Logout failed. 0x%X\n", mad_status);
+		break;
+	}
+
+	ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_npiv_logout - Issue an NPIV Logout
+ * @vhost:		ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout(struct ibmvfc_host *vhost)
+{
+	struct ibmvfc_npiv_logout_mad *mad;
+	struct ibmvfc_event *evt;
+
+	evt = ibmvfc_get_event(vhost);
+	ibmvfc_init_event(evt, ibmvfc_npiv_logout_done, IBMVFC_MAD_FORMAT);
+
+	mad = &evt->iu.npiv_logout;
+	memset(mad, 0, sizeof(*mad));
+	mad->common.version = 1;
+	mad->common.opcode = IBMVFC_NPIV_LOGOUT;
+	mad->common.length = sizeof(struct ibmvfc_npiv_logout_mad);
+
+	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO_WAIT);
+
+	if (!ibmvfc_send_event(evt, vhost, default_timeout))
+		ibmvfc_dbg(vhost, "Sent NPIV logout\n");
+	else
+		ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+}
+
+/**
  * ibmvfc_dev_init_to_do - Is there target initialization work to do?
  * @vhost:		ibmvfc host struct
  *
@@ -3671,6 +3796,7 @@ static int __ibmvfc_work_to_do(struct ibmvfc_host *vhost)
 	switch (vhost->action) {
 	case IBMVFC_HOST_ACTION_NONE:
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
 		return 0;
 	case IBMVFC_HOST_ACTION_TGT_INIT:
 	case IBMVFC_HOST_ACTION_QUERY_TGTS:
@@ -3683,9 +3809,9 @@ static int __ibmvfc_work_to_do(struct ibmvfc_host *vhost)
 			if (tgt->action == IBMVFC_TGT_ACTION_INIT_WAIT)
 				return 0;
 		return 1;
+	case IBMVFC_HOST_ACTION_LOGO:
 	case IBMVFC_HOST_ACTION_INIT:
 	case IBMVFC_HOST_ACTION_ALLOC_TGTS:
-	case IBMVFC_HOST_ACTION_TGT_ADD:
 	case IBMVFC_HOST_ACTION_TGT_DEL:
 	case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
 	case IBMVFC_HOST_ACTION_QUERY:
@@ -3740,25 +3866,26 @@ static void ibmvfc_log_ae(struct ibmvfc_host *vhost, int events)
 static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 {
 	struct ibmvfc_host *vhost = tgt->vhost;
-	struct fc_rport *rport = tgt->rport;
+	struct fc_rport *rport;
 	unsigned long flags;
 
-	if (rport) {
-		tgt_dbg(tgt, "Setting rport roles\n");
-		fc_remote_port_rolechg(rport, tgt->ids.roles);
-		spin_lock_irqsave(vhost->host->host_lock, flags);
-		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+	tgt_dbg(tgt, "Adding rport\n");
+	rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+
+	if (rport && tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
+		tgt_dbg(tgt, "Deleting rport\n");
+		list_del(&tgt->queue);
 		spin_unlock_irqrestore(vhost->host->host_lock, flags);
+		fc_remote_port_delete(rport);
+		del_timer_sync(&tgt->timer);
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 		return;
 	}
 
-	tgt_dbg(tgt, "Adding rport\n");
-	rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
-	spin_lock_irqsave(vhost->host->host_lock, flags);
-	tgt->rport = rport;
-	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
 	if (rport) {
 		tgt_dbg(tgt, "rport add succeeded\n");
+		tgt->rport = rport;
 		rport->maxframe_size = tgt->service_parms.common.bb_rcv_sz & 0x0fff;
 		rport->supported_classes = 0;
 		tgt->target_id = rport->scsi_target_id;
@@ -3789,8 +3916,12 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 	vhost->events_to_log = 0;
 	switch (vhost->action) {
 	case IBMVFC_HOST_ACTION_NONE:
+	case IBMVFC_HOST_ACTION_LOGO_WAIT:
 	case IBMVFC_HOST_ACTION_INIT_WAIT:
 		break;
+	case IBMVFC_HOST_ACTION_LOGO:
+		vhost->job_step(vhost);
+		break;
 	case IBMVFC_HOST_ACTION_INIT:
 		BUG_ON(vhost->state != IBMVFC_INITIALIZING);
 		if (vhost->delay_init) {
@@ -3836,11 +3967,21 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 
 		if (vhost->state == IBMVFC_INITIALIZING) {
 			if (vhost->action == IBMVFC_HOST_ACTION_TGT_DEL_FAILED) {
-				ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
-				ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_ADD);
-				vhost->init_retries = 0;
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				scsi_unblock_requests(vhost->host);
+				if (vhost->reinit) {
+					vhost->reinit = 0;
+					scsi_block_requests(vhost->host);
+					ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+				} else {
+					ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
+					ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
+					wake_up(&vhost->init_wait_q);
+					schedule_work(&vhost->rport_add_work_q);
+					vhost->init_retries = 0;
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					scsi_unblock_requests(vhost->host);
+				}
+
 				return;
 			} else {
 				ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
@@ -3871,24 +4012,6 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 		if (!ibmvfc_dev_init_to_do(vhost))
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_DEL_FAILED);
 		break;
-	case IBMVFC_HOST_ACTION_TGT_ADD:
-		list_for_each_entry(tgt, &vhost->targets, queue) {
-			if (tgt->action == IBMVFC_TGT_ACTION_ADD_RPORT) {
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				ibmvfc_tgt_add_rport(tgt);
-				return;
-			}
-		}
-
-		if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
-			vhost->reinit = 0;
-			scsi_block_requests(vhost->host);
-			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
-		} else {
-			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
-			wake_up(&vhost->init_wait_q);
-		}
-		break;
 	default:
 		break;
 	};
@@ -4118,6 +4241,56 @@ nomem:
 }
 
 /**
+ * ibmvfc_rport_add_thread - Worker thread for rport adds
+ * @work:	work struct
+ *
+ **/
+static void ibmvfc_rport_add_thread(struct work_struct *work)
+{
+	struct ibmvfc_host *vhost = container_of(work, struct ibmvfc_host,
+						 rport_add_work_q);
+	struct ibmvfc_target *tgt;
+	struct fc_rport *rport;
+	unsigned long flags;
+	int did_work;
+
+	ENTER;
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	do {
+		did_work = 0;
+		if (vhost->state != IBMVFC_ACTIVE)
+			break;
+
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (tgt->add_rport) {
+				did_work = 1;
+				tgt->add_rport = 0;
+				kref_get(&tgt->kref);
+				rport = tgt->rport;
+				if (!rport) {
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					ibmvfc_tgt_add_rport(tgt);
+				} else if (get_device(&rport->dev)) {
+					spin_unlock_irqrestore(vhost->host->host_lock, flags);
+					tgt_dbg(tgt, "Setting rport roles\n");
+					fc_remote_port_rolechg(rport, tgt->ids.roles);
+					put_device(&rport->dev);
+				}
+
+				kref_put(&tgt->kref, ibmvfc_release_tgt);
+				spin_lock_irqsave(vhost->host->host_lock, flags);
+				break;
+			}
+		}
+	} while(did_work);
+
+	if (vhost->state == IBMVFC_ACTIVE)
+		vhost->scan_complete = 1;
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	LEAVE;
+}
+
+/**
  * ibmvfc_probe - Adapter hot plug add entry point
  * @vdev:	vio device struct
  * @id:	vio device id struct
@@ -4160,6 +4333,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	strcpy(vhost->partition_name, "UNKNOWN");
 	init_waitqueue_head(&vhost->work_wait_q);
 	init_waitqueue_head(&vhost->init_wait_q);
+	INIT_WORK(&vhost->rport_add_work_q, ibmvfc_rport_add_thread);
 
 	if ((rc = ibmvfc_alloc_mem(vhost)))
 		goto free_scsi_host;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index ca1dcf7a756..c2668d7d67f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.5"
-#define IBMVFC_DRIVER_DATE		"(March 19, 2009)"
+#define IBMVFC_DRIVER_VERSION		"1.0.6"
+#define IBMVFC_DRIVER_DATE		"(May 28, 2009)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	60
 #define IBMVFC_ADISC_CANCEL_TIMEOUT	45
@@ -57,9 +57,10 @@
  * Ensure we have resources for ERP and initialization:
  * 1 for ERP
  * 1 for initialization
+ * 1 for NPIV Logout
  * 2 for each discovery thread
  */
-#define IBMVFC_NUM_INTERNAL_REQ	(1 + 1 + (disc_threads * 2))
+#define IBMVFC_NUM_INTERNAL_REQ	(1 + 1 + 1 + (disc_threads * 2))
 
 #define IBMVFC_MAD_SUCCESS		0x00
 #define IBMVFC_MAD_NOT_SUPPORTED	0xF1
@@ -127,6 +128,7 @@ enum ibmvfc_mad_types {
 	IBMVFC_IMPLICIT_LOGOUT	= 0x0040,
 	IBMVFC_PASSTHRU		= 0x0200,
 	IBMVFC_TMF_MAD		= 0x0100,
+	IBMVFC_NPIV_LOGOUT	= 0x0800,
 };
 
 struct ibmvfc_mad_common {
@@ -143,6 +145,10 @@ struct ibmvfc_npiv_login_mad {
 	struct srp_direct_buf buffer;
 }__attribute__((packed, aligned (8)));
 
+struct ibmvfc_npiv_logout_mad {
+	struct ibmvfc_mad_common common;
+}__attribute__((packed, aligned (8)));
+
 #define IBMVFC_MAX_NAME 256
 
 struct ibmvfc_npiv_login {
@@ -201,7 +207,8 @@ struct ibmvfc_npiv_login_resp {
 #define IBMVFC_NATIVE_FC		0x01
 #define IBMVFC_CAN_FLUSH_ON_HALT	0x08
 	u32 reserved;
-	u64 capabilites;
+	u64 capabilities;
+#define IBMVFC_CAN_FLUSH_ON_HALT	0x08
 	u32 max_cmds;
 	u32 scsi_id_sz;
 	u64 max_dma_len;
@@ -541,9 +548,17 @@ struct ibmvfc_crq_queue {
 	dma_addr_t msg_token;
 };
 
+enum ibmvfc_ae_link_state {
+	IBMVFC_AE_LS_LINK_UP		= 0x01,
+	IBMVFC_AE_LS_LINK_BOUNCED	= 0x02,
+	IBMVFC_AE_LS_LINK_DOWN		= 0x04,
+	IBMVFC_AE_LS_LINK_DEAD		= 0x08,
+};
+
 struct ibmvfc_async_crq {
 	volatile u8 valid;
-	u8 pad[3];
+	u8 link_state;
+	u8 pad[2];
 	u32 pad2;
 	volatile u64 event;
 	volatile u64 scsi_id;
@@ -561,6 +576,7 @@ struct ibmvfc_async_crq_queue {
 union ibmvfc_iu {
 	struct ibmvfc_mad_common mad_common;
 	struct ibmvfc_npiv_login_mad npiv_login;
+	struct ibmvfc_npiv_logout_mad npiv_logout;
 	struct ibmvfc_discover_targets discover_targets;
 	struct ibmvfc_port_login plogi;
 	struct ibmvfc_process_login prli;
@@ -575,7 +591,6 @@ enum ibmvfc_target_action {
 	IBMVFC_TGT_ACTION_NONE = 0,
 	IBMVFC_TGT_ACTION_INIT,
 	IBMVFC_TGT_ACTION_INIT_WAIT,
-	IBMVFC_TGT_ACTION_ADD_RPORT,
 	IBMVFC_TGT_ACTION_DEL_RPORT,
 };
 
@@ -588,6 +603,7 @@ struct ibmvfc_target {
 	int target_id;
 	enum ibmvfc_target_action action;
 	int need_login;
+	int add_rport;
 	int init_retries;
 	u32 cancel_key;
 	struct ibmvfc_service_parms service_parms;
@@ -627,6 +643,8 @@ struct ibmvfc_event_pool {
 
 enum ibmvfc_host_action {
 	IBMVFC_HOST_ACTION_NONE = 0,
+	IBMVFC_HOST_ACTION_LOGO,
+	IBMVFC_HOST_ACTION_LOGO_WAIT,
 	IBMVFC_HOST_ACTION_INIT,
 	IBMVFC_HOST_ACTION_INIT_WAIT,
 	IBMVFC_HOST_ACTION_QUERY,
@@ -635,7 +653,6 @@ enum ibmvfc_host_action {
 	IBMVFC_HOST_ACTION_ALLOC_TGTS,
 	IBMVFC_HOST_ACTION_TGT_INIT,
 	IBMVFC_HOST_ACTION_TGT_DEL_FAILED,
-	IBMVFC_HOST_ACTION_TGT_ADD,
 };
 
 enum ibmvfc_host_state {
@@ -682,6 +699,8 @@ struct ibmvfc_host {
 	int client_migrated;
 	int reinit;
 	int delay_init;
+	int scan_complete;
+	int logged_in;
 	int events_to_log;
 #define IBMVFC_AE_LINKUP	0x0001
 #define IBMVFC_AE_LINKDOWN	0x0002
@@ -692,6 +711,7 @@ struct ibmvfc_host {
 	void (*job_step) (struct ibmvfc_host *);
 	struct task_struct *work_thread;
 	struct tasklet_struct tasklet;
+	struct work_struct rport_add_work_q;
 	wait_queue_head_t init_wait_q;
 	wait_queue_head_t work_wait_q;
 };
@@ -707,6 +727,12 @@ struct ibmvfc_host {
 #define tgt_err(t, fmt, ...)		\
 	dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
+#define tgt_log(t, level, fmt, ...) \
+	do { \
+		if ((t)->vhost->log_level >= level) \
+			tgt_err(t, fmt, ##__VA_ARGS__); \
+	} while (0)
+
 #define ibmvfc_dbg(vhost, ...) \
 	DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index c9aa7611e40..11d2602ae88 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -70,6 +70,7 @@
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
 #include <asm/firmware.h>
@@ -87,9 +88,15 @@
  */
 static int max_id = 64;
 static int max_channel = 3;
-static int init_timeout = 5;
+static int init_timeout = 300;
+static int login_timeout = 60;
+static int info_timeout = 30;
+static int abort_timeout = 60;
+static int reset_timeout = 60;
 static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;
 static int max_events = IBMVSCSI_MAX_REQUESTS_DEFAULT + 2;
+static int fast_fail = 1;
+static int client_reserve = 1;
 
 static struct scsi_transport_template *ibmvscsi_transport_template;
 
@@ -110,6 +117,10 @@ module_param_named(init_timeout, init_timeout, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
 module_param_named(max_requests, max_requests, int, S_IRUGO);
 MODULE_PARM_DESC(max_requests, "Maximum requests for this adapter");
+module_param_named(fast_fail, fast_fail, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(fast_fail, "Enable fast fail. [Default=1]");
+module_param_named(client_reserve, client_reserve, int, S_IRUGO );
+MODULE_PARM_DESC(client_reserve, "Attempt client managed reserve/release");
 
 /* ------------------------------------------------------------
  * Routines for the event pool and event structs
@@ -781,105 +792,53 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 /* ------------------------------------------------------------
  * Routines for driver initialization
  */
+
 /**
- * adapter_info_rsp: - Handle response to MAD adapter info request
- * @evt_struct:	srp_event_struct with the response
+ * map_persist_bufs: - Pre-map persistent data for adapter logins
+ * @hostdata:   ibmvscsi_host_data of host
  *
- * Used as a "done" callback by when sending adapter_info. Gets called
- * by ibmvscsi_handle_crq()
-*/
-static void adapter_info_rsp(struct srp_event_struct *evt_struct)
+ * Map the capabilities and adapter info DMA buffers to avoid runtime failures.
+ * Return 1 on error, 0 on success.
+ */
+static int map_persist_bufs(struct ibmvscsi_host_data *hostdata)
 {
-	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
-	dma_unmap_single(hostdata->dev,
-			 evt_struct->iu.mad.adapter_info.buffer,
-			 evt_struct->iu.mad.adapter_info.common.length,
-			 DMA_BIDIRECTIONAL);
 
-	if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
-		dev_err(hostdata->dev, "error %d getting adapter info\n",
-			evt_struct->xfer_iu->mad.adapter_info.common.status);
-	} else {
-		dev_info(hostdata->dev, "host srp version: %s, "
-			 "host partition %s (%d), OS %d, max io %u\n",
-			 hostdata->madapter_info.srp_version,
-			 hostdata->madapter_info.partition_name,
-			 hostdata->madapter_info.partition_number,
-			 hostdata->madapter_info.os_type,
-			 hostdata->madapter_info.port_max_txu[0]);
-		
-		if (hostdata->madapter_info.port_max_txu[0]) 
-			hostdata->host->max_sectors = 
-				hostdata->madapter_info.port_max_txu[0] >> 9;
-		
-		if (hostdata->madapter_info.os_type == 3 &&
-		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
-			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
-				hostdata->madapter_info.srp_version);
-			dev_err(hostdata->dev, "limiting scatterlists to %d\n",
-				MAX_INDIRECT_BUFS);
-			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
-		}
+	hostdata->caps_addr = dma_map_single(hostdata->dev, &hostdata->caps,
+					     sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+
+	if (dma_mapping_error(hostdata->dev, hostdata->caps_addr)) {
+		dev_err(hostdata->dev, "Unable to map capabilities buffer!\n");
+		return 1;
 	}
+
+	hostdata->adapter_info_addr = dma_map_single(hostdata->dev,
+						     &hostdata->madapter_info,
+						     sizeof(hostdata->madapter_info),
+						     DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(hostdata->dev, hostdata->adapter_info_addr)) {
+		dev_err(hostdata->dev, "Unable to map adapter info buffer!\n");
+		dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+				 sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+		return 1;
+	}
+
+	return 0;
 }
 
 /**
- * send_mad_adapter_info: - Sends the mad adapter info request
- *      and stores the result so it can be retrieved with
- *      sysfs.  We COULD consider causing a failure if the
- *      returned SRP version doesn't match ours.
- * @hostdata:	ibmvscsi_host_data of host
- * 
- * Returns zero if successful.
-*/
-static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+ * unmap_persist_bufs: - Unmap persistent data needed for adapter logins
+ * @hostdata:   ibmvscsi_host_data of host
+ *
+ * Unmap the capabilities and adapter info DMA buffers
+ */
+static void unmap_persist_bufs(struct ibmvscsi_host_data *hostdata)
 {
-	struct viosrp_adapter_info *req;
-	struct srp_event_struct *evt_struct;
-	unsigned long flags;
-	dma_addr_t addr;
-
-	evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev,
-			"couldn't allocate an event for ADAPTER_INFO_REQ!\n");
-		return;
-	}
-
-	init_event_struct(evt_struct,
-			  adapter_info_rsp,
-			  VIOSRP_MAD_FORMAT,
-			  init_timeout);
-	
-	req = &evt_struct->iu.mad.adapter_info;
-	memset(req, 0x00, sizeof(*req));
-	
-	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
-	req->common.length = sizeof(hostdata->madapter_info);
-	req->buffer = addr = dma_map_single(hostdata->dev,
-					    &hostdata->madapter_info,
-					    sizeof(hostdata->madapter_info),
-					    DMA_BIDIRECTIONAL);
+	dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+			 sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(hostdata->dev, req->buffer)) {
-		if (!firmware_has_feature(FW_FEATURE_CMO))
-			dev_err(hostdata->dev,
-			        "Unable to map request_buffer for "
-			        "adapter_info!\n");
-		free_event_struct(&hostdata->pool, evt_struct);
-		return;
-	}
-	
-	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	if (ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2)) {
-		dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
-		dma_unmap_single(hostdata->dev,
-				 addr,
-				 sizeof(hostdata->madapter_info),
-				 DMA_BIDIRECTIONAL);
-	}
-	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-};
+	dma_unmap_single(hostdata->dev, hostdata->adapter_info_addr,
+			 sizeof(hostdata->madapter_info), DMA_BIDIRECTIONAL);
+}
 
 /**
  * login_rsp: - Handle response to SRP login request
@@ -909,9 +868,7 @@ static void login_rsp(struct srp_event_struct *evt_struct)
 	}
 
 	dev_info(hostdata->dev, "SRP_LOGIN succeeded\n");
-
-	if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta < 0)
-		dev_err(hostdata->dev, "Invalid request_limit.\n");
+	hostdata->client_migrated = 0;
 
 	/* Now we know what the real request-limit is.
 	 * This value is set rather than added to request_limit because
@@ -922,15 +879,12 @@ static void login_rsp(struct srp_event_struct *evt_struct)
 
 	/* If we had any pending I/Os, kick them */
 	scsi_unblock_requests(hostdata->host);
-
-	send_mad_adapter_info(hostdata);
-	return;
 }
 
 /**
  * send_srp_login: - Sends the srp login
  * @hostdata:	ibmvscsi_host_data of host
- * 
+ *
  * Returns zero if successful.
 */
 static int send_srp_login(struct ibmvscsi_host_data *hostdata)
@@ -939,22 +893,17 @@ static int send_srp_login(struct ibmvscsi_host_data *hostdata)
 	unsigned long flags;
 	struct srp_login_req *login;
 	struct srp_event_struct *evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev, "couldn't allocate an event for login req!\n");
-		return FAILED;
-	}
 
-	init_event_struct(evt_struct,
-			  login_rsp,
-			  VIOSRP_SRP_FORMAT,
-			  init_timeout);
+	BUG_ON(!evt_struct);
+	init_event_struct(evt_struct, login_rsp,
+			  VIOSRP_SRP_FORMAT, login_timeout);
 
 	login = &evt_struct->iu.srp.login_req;
-	memset(login, 0x00, sizeof(struct srp_login_req));
+	memset(login, 0, sizeof(*login));
 	login->opcode = SRP_LOGIN_REQ;
 	login->req_it_iu_len = sizeof(union srp_iu);
 	login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
-	
+
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
 	/* Start out with a request limit of 0, since this is negotiated in
 	 * the login request we are just sending and login requests always
@@ -962,13 +911,241 @@ static int send_srp_login(struct ibmvscsi_host_data *hostdata)
 	 */
 	atomic_set(&hostdata->request_limit, 0);
 
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, login_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 	dev_info(hostdata->dev, "sent SRP login\n");
 	return rc;
 };
 
 /**
+ * capabilities_rsp: - Handle response to MAD adapter capabilities request
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info.
+ */
+static void capabilities_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+	if (evt_struct->xfer_iu->mad.capabilities.common.status) {
+		dev_err(hostdata->dev, "error 0x%X getting capabilities info\n",
+			evt_struct->xfer_iu->mad.capabilities.common.status);
+	} else {
+		if (hostdata->caps.migration.common.server_support != SERVER_SUPPORTS_CAP)
+			dev_info(hostdata->dev, "Partition migration not supported\n");
+
+		if (client_reserve) {
+			if (hostdata->caps.reserve.common.server_support ==
+			    SERVER_SUPPORTS_CAP)
+				dev_info(hostdata->dev, "Client reserve enabled\n");
+			else
+				dev_info(hostdata->dev, "Client reserve not supported\n");
+		}
+	}
+
+	send_srp_login(hostdata);
+}
+
+/**
+ * send_mad_capabilities: - Sends the mad capabilities request
+ *      and stores the result so it can be retrieved with
+ * @hostdata:	ibmvscsi_host_data of host
+ */
+static void send_mad_capabilities(struct ibmvscsi_host_data *hostdata)
+{
+	struct viosrp_capabilities *req;
+	struct srp_event_struct *evt_struct;
+	unsigned long flags;
+	struct device_node *of_node = hostdata->dev->archdata.of_node;
+	const char *location;
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct, capabilities_rsp,
+			  VIOSRP_MAD_FORMAT, info_timeout);
+
+	req = &evt_struct->iu.mad.capabilities;
+	memset(req, 0, sizeof(*req));
+
+	hostdata->caps.flags = CAP_LIST_SUPPORTED;
+	if (hostdata->client_migrated)
+		hostdata->caps.flags |= CLIENT_MIGRATED;
+
+	strncpy(hostdata->caps.name, dev_name(&hostdata->host->shost_gendev),
+		sizeof(hostdata->caps.name));
+	hostdata->caps.name[sizeof(hostdata->caps.name) - 1] = '\0';
+
+	location = of_get_property(of_node, "ibm,loc-code", NULL);
+	location = location ? location : dev_name(hostdata->dev);
+	strncpy(hostdata->caps.loc, location, sizeof(hostdata->caps.loc));
+	hostdata->caps.loc[sizeof(hostdata->caps.loc) - 1] = '\0';
+
+	req->common.type = VIOSRP_CAPABILITIES_TYPE;
+	req->buffer = hostdata->caps_addr;
+
+	hostdata->caps.migration.common.cap_type = MIGRATION_CAPABILITIES;
+	hostdata->caps.migration.common.length = sizeof(hostdata->caps.migration);
+	hostdata->caps.migration.common.server_support = SERVER_SUPPORTS_CAP;
+	hostdata->caps.migration.ecl = 1;
+
+	if (client_reserve) {
+		hostdata->caps.reserve.common.cap_type = RESERVATION_CAPABILITIES;
+		hostdata->caps.reserve.common.length = sizeof(hostdata->caps.reserve);
+		hostdata->caps.reserve.common.server_support = SERVER_SUPPORTS_CAP;
+		hostdata->caps.reserve.type = CLIENT_RESERVE_SCSI_2;
+		req->common.length = sizeof(hostdata->caps);
+	} else
+		req->common.length = sizeof(hostdata->caps) - sizeof(hostdata->caps.reserve);
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+		dev_err(hostdata->dev, "couldn't send CAPABILITIES_REQ!\n");
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * fast_fail_rsp: - Handle response to MAD enable fast fail
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending enable fast fail. Gets called
+ * by ibmvscsi_handle_crq()
+ */
+static void fast_fail_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+	u8 status = evt_struct->xfer_iu->mad.fast_fail.common.status;
+
+	if (status == VIOSRP_MAD_NOT_SUPPORTED)
+		dev_err(hostdata->dev, "fast_fail not supported in server\n");
+	else if (status == VIOSRP_MAD_FAILED)
+		dev_err(hostdata->dev, "fast_fail request failed\n");
+	else if (status != VIOSRP_MAD_SUCCESS)
+		dev_err(hostdata->dev, "error 0x%X enabling fast_fail\n", status);
+
+	send_mad_capabilities(hostdata);
+}
+
+/**
+ * init_host - Start host initialization
+ * @hostdata:	ibmvscsi_host_data of host
+ *
+ * Returns zero if successful.
+ */
+static int enable_fast_fail(struct ibmvscsi_host_data *hostdata)
+{
+	int rc;
+	unsigned long flags;
+	struct viosrp_fast_fail *fast_fail_mad;
+	struct srp_event_struct *evt_struct;
+
+	if (!fast_fail) {
+		send_mad_capabilities(hostdata);
+		return 0;
+	}
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct, fast_fail_rsp, VIOSRP_MAD_FORMAT, info_timeout);
+
+	fast_fail_mad = &evt_struct->iu.mad.fast_fail;
+	memset(fast_fail_mad, 0, sizeof(*fast_fail_mad));
+	fast_fail_mad->common.type = VIOSRP_ENABLE_FAST_FAIL;
+	fast_fail_mad->common.length = sizeof(*fast_fail_mad);
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+	return rc;
+}
+
+/**
+ * adapter_info_rsp: - Handle response to MAD adapter info request
+ * @evt_struct:	srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info. Gets called
+ * by ibmvscsi_handle_crq()
+*/
+static void adapter_info_rsp(struct srp_event_struct *evt_struct)
+{
+	struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+	if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
+		dev_err(hostdata->dev, "error %d getting adapter info\n",
+			evt_struct->xfer_iu->mad.adapter_info.common.status);
+	} else {
+		dev_info(hostdata->dev, "host srp version: %s, "
+			 "host partition %s (%d), OS %d, max io %u\n",
+			 hostdata->madapter_info.srp_version,
+			 hostdata->madapter_info.partition_name,
+			 hostdata->madapter_info.partition_number,
+			 hostdata->madapter_info.os_type,
+			 hostdata->madapter_info.port_max_txu[0]);
+		
+		if (hostdata->madapter_info.port_max_txu[0]) 
+			hostdata->host->max_sectors = 
+				hostdata->madapter_info.port_max_txu[0] >> 9;
+		
+		if (hostdata->madapter_info.os_type == 3 &&
+		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
+			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
+				hostdata->madapter_info.srp_version);
+			dev_err(hostdata->dev, "limiting scatterlists to %d\n",
+				MAX_INDIRECT_BUFS);
+			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
+		}
+	}
+
+	enable_fast_fail(hostdata);
+}
+
+/**
+ * send_mad_adapter_info: - Sends the mad adapter info request
+ *      and stores the result so it can be retrieved with
+ *      sysfs.  We COULD consider causing a failure if the
+ *      returned SRP version doesn't match ours.
+ * @hostdata:	ibmvscsi_host_data of host
+ * 
+ * Returns zero if successful.
+*/
+static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+	struct viosrp_adapter_info *req;
+	struct srp_event_struct *evt_struct;
+	unsigned long flags;
+
+	evt_struct = get_event_struct(&hostdata->pool);
+	BUG_ON(!evt_struct);
+
+	init_event_struct(evt_struct,
+			  adapter_info_rsp,
+			  VIOSRP_MAD_FORMAT,
+			  info_timeout);
+	
+	req = &evt_struct->iu.mad.adapter_info;
+	memset(req, 0x00, sizeof(*req));
+	
+	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
+	req->common.length = sizeof(hostdata->madapter_info);
+	req->buffer = hostdata->adapter_info_addr;
+
+	spin_lock_irqsave(hostdata->host->host_lock, flags);
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+		dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
+	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * init_adapter: Start virtual adapter initialization sequence
+ *
+ */
+static void init_adapter(struct ibmvscsi_host_data *hostdata)
+{
+	send_mad_adapter_info(hostdata);
+}
+
+/**
  * sync_completion: Signal that a synchronous command has completed
  * Note that after returning from this call, the evt_struct is freed.
  * the caller waiting on this completion shouldn't touch the evt_struct
@@ -1029,7 +1206,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 		init_event_struct(evt,
 				  sync_completion,
 				  VIOSRP_SRP_FORMAT,
-				  init_timeout);
+				  abort_timeout);
 
 		tsk_mgmt = &evt->iu.srp.tsk_mgmt;
 	
@@ -1043,7 +1220,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 		evt->sync_srp = &srp_rsp;
 
 		init_completion(&evt->comp);
-		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, abort_timeout * 2);
 
 		if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
 			break;
@@ -1152,7 +1329,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
 		init_event_struct(evt,
 				  sync_completion,
 				  VIOSRP_SRP_FORMAT,
-				  init_timeout);
+				  reset_timeout);
 
 		tsk_mgmt = &evt->iu.srp.tsk_mgmt;
 
@@ -1165,7 +1342,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
 		evt->sync_srp = &srp_rsp;
 
 		init_completion(&evt->comp);
-		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+		rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, reset_timeout * 2);
 
 		if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
 			break;
@@ -1281,7 +1458,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			if ((rc = ibmvscsi_ops->send_crq(hostdata,
 							 0xC002000000000000LL, 0)) == 0) {
 				/* Now login */
-				send_srp_login(hostdata);
+				init_adapter(hostdata);
 			} else {
 				dev_err(hostdata->dev, "Unable to send init rsp. rc=%ld\n", rc);
 			}
@@ -1291,7 +1468,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			dev_info(hostdata->dev, "partner initialization complete\n");
 
 			/* Now login */
-			send_srp_login(hostdata);
+			init_adapter(hostdata);
 			break;
 		default:
 			dev_err(hostdata->dev, "unknown crq message type: %d\n", crq->format);
@@ -1303,6 +1480,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 		if (crq->format == 0x06) {
 			/* We need to re-setup the interpartition connection */
 			dev_info(hostdata->dev, "Re-enabling adapter!\n");
+			hostdata->client_migrated = 1;
 			purge_requests(hostdata, DID_REQUEUE);
 			if ((ibmvscsi_ops->reenable_crq_queue(&hostdata->queue,
 							      hostdata)) ||
@@ -1397,7 +1575,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 	init_event_struct(evt_struct,
 			  sync_completion,
 			  VIOSRP_MAD_FORMAT,
-			  init_timeout);
+			  info_timeout);
 
 	host_config = &evt_struct->iu.mad.host_config;
 
@@ -1419,7 +1597,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 
 	init_completion(&evt_struct->comp);
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
 	if (rc == 0)
 		wait_for_completion(&evt_struct->comp);
@@ -1444,7 +1622,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev)
 	spin_lock_irqsave(shost->host_lock, lock_flags);
 	if (sdev->type == TYPE_DISK) {
 		sdev->allow_restart = 1;
-		blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
+		blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
 	}
 	scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
 	spin_unlock_irqrestore(shost->host_lock, lock_flags);
@@ -1471,6 +1649,46 @@ static int ibmvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth)
 /* ------------------------------------------------------------
  * sysfs attributes
  */
+static ssize_t show_host_vhost_loc(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+	int len;
+
+	len = snprintf(buf, sizeof(hostdata->caps.loc), "%s\n",
+		       hostdata->caps.loc);
+	return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_loc = {
+	.attr = {
+		 .name = "vhost_loc",
+		 .mode = S_IRUGO,
+		 },
+	.show = show_host_vhost_loc,
+};
+
+static ssize_t show_host_vhost_name(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+	int len;
+
+	len = snprintf(buf, sizeof(hostdata->caps.name), "%s\n",
+		       hostdata->caps.name);
+	return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_name = {
+	.attr = {
+		 .name = "vhost_name",
+		 .mode = S_IRUGO,
+		 },
+	.show = show_host_vhost_name,
+};
+
 static ssize_t show_host_srp_version(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
@@ -1594,6 +1812,8 @@ static struct device_attribute ibmvscsi_host_config = {
 };
 
 static struct device_attribute *ibmvscsi_attrs[] = {
+	&ibmvscsi_host_vhost_loc,
+	&ibmvscsi_host_vhost_name,
 	&ibmvscsi_host_srp_version,
 	&ibmvscsi_host_partition_name,
 	&ibmvscsi_host_partition_number,
@@ -1674,6 +1894,11 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	atomic_set(&hostdata->request_limit, -1);
 	hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
 
+	if (map_persist_bufs(hostdata)) {
+		dev_err(&vdev->dev, "couldn't map persistent buffers\n");
+		goto persist_bufs_failed;
+	}
+
 	rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_events);
 	if (rc != 0 && rc != H_RESOURCE) {
 		dev_err(&vdev->dev, "couldn't initialize crq. rc=%d\n", rc);
@@ -1687,6 +1912,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	host->max_lun = 8;
 	host->max_id = max_id;
 	host->max_channel = max_channel;
+	host->max_cmd_len = 16;
 
 	if (scsi_add_host(hostdata->host, hostdata->dev))
 		goto add_host_failed;
@@ -1733,6 +1959,8 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
       init_pool_failed:
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata, max_events);
       init_crq_failed:
+	unmap_persist_bufs(hostdata);
+      persist_bufs_failed:
 	scsi_host_put(host);
       scsi_host_alloc_failed:
 	return -1;
@@ -1741,6 +1969,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 static int ibmvscsi_remove(struct vio_dev *vdev)
 {
 	struct ibmvscsi_host_data *hostdata = vdev->dev.driver_data;
+	unmap_persist_bufs(hostdata);
 	release_event_pool(&hostdata->pool, hostdata);
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata,
 					max_events);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 2d4339d5e16..76425303def 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -90,6 +90,7 @@ struct event_pool {
 /* all driver data associated with a host adapter */
 struct ibmvscsi_host_data {
 	atomic_t request_limit;
+	int client_migrated;
 	struct device *dev;
 	struct event_pool pool;
 	struct crq_queue queue;
@@ -97,6 +98,9 @@ struct ibmvscsi_host_data {
 	struct list_head sent;
 	struct Scsi_Host *host;
 	struct mad_adapter_info_data madapter_info;
+	struct capabilities caps;
+	dma_addr_t caps_addr;
+	dma_addr_t adapter_info_addr;
 };
 
 /* routines for managing a command/response queue */
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 204604501ad..2cd735d1d19 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -37,6 +37,7 @@
 
 #define SRP_VERSION "16.a"
 #define SRP_MAX_IU_LEN	256
+#define SRP_MAX_LOC_LEN 32
 
 union srp_iu {
 	struct srp_login_req login_req;
@@ -86,7 +87,37 @@ enum viosrp_mad_types {
 	VIOSRP_EMPTY_IU_TYPE = 0x01,
 	VIOSRP_ERROR_LOG_TYPE = 0x02,
 	VIOSRP_ADAPTER_INFO_TYPE = 0x03,
-	VIOSRP_HOST_CONFIG_TYPE = 0x04
+	VIOSRP_HOST_CONFIG_TYPE = 0x04,
+	VIOSRP_CAPABILITIES_TYPE = 0x05,
+	VIOSRP_ENABLE_FAST_FAIL = 0x08,
+};
+
+enum viosrp_mad_status {
+	VIOSRP_MAD_SUCCESS = 0x00,
+	VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
+	VIOSRP_MAD_FAILED = 0xF7,
+};
+
+enum viosrp_capability_type {
+	MIGRATION_CAPABILITIES = 0x01,
+	RESERVATION_CAPABILITIES = 0x02,
+};
+
+enum viosrp_capability_support {
+	SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
+	SERVER_SUPPORTS_CAP = 0x01,
+	SERVER_CAP_DATA = 0x02,
+};
+
+enum viosrp_reserve_type {
+	CLIENT_RESERVE_SCSI_2 = 0x01,
+};
+
+enum viosrp_capability_flag {
+	CLIENT_MIGRATED = 0x01,
+	CLIENT_RECONNECT = 0x02,
+	CAP_LIST_SUPPORTED = 0x04,
+	CAP_LIST_DATA = 0x08,
 };
 
 /* 
@@ -127,11 +158,46 @@ struct viosrp_host_config {
 	u64 buffer;
 };
 
+struct viosrp_fast_fail {
+	struct mad_common common;
+};
+
+struct viosrp_capabilities {
+	struct mad_common common;
+	u64 buffer;
+};
+
+struct mad_capability_common {
+	u32 cap_type;
+	u16 length;
+	u16 server_support;
+};
+
+struct mad_reserve_cap {
+	struct mad_capability_common common;
+	u32 type;
+};
+
+struct mad_migration_cap {
+	struct mad_capability_common common;
+	u32 ecl;
+};
+
+struct capabilities{
+	u32 flags;
+	char name[SRP_MAX_LOC_LEN];
+	char loc[SRP_MAX_LOC_LEN];
+	struct mad_migration_cap migration;
+	struct mad_reserve_cap reserve;
+};
+
 union mad_iu {
 	struct viosrp_empty_iu empty_iu;
 	struct viosrp_error_log error_log;
 	struct viosrp_adapter_info adapter_info;
 	struct viosrp_host_config host_config;
+	struct viosrp_fast_fail fast_fail;
+	struct viosrp_capabilities capabilities;
 };
 
 union viosrp_iu {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index dd689ded860..0f8bc772b11 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -7003,6 +7003,7 @@ static void ipr_pci_perm_failure(struct pci_dev *pdev)
 		ioa_cfg->sdt_state = ABORT_DUMP;
 	ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
 	ioa_cfg->in_ioa_bringdown = 1;
+	ioa_cfg->allow_cmds = 0;
 	ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
 }
@@ -7688,7 +7689,7 @@ static void __ipr_remove(struct pci_dev *pdev)
  * Return value:
  * 	none
  **/
-static void ipr_remove(struct pci_dev *pdev)
+static void __devexit ipr_remove(struct pci_dev *pdev)
 {
 	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
 
@@ -7864,7 +7865,7 @@ static struct pci_driver ipr_driver = {
 	.name = IPR_NAME,
 	.id_table = ipr_pci_table,
 	.probe = ipr_probe,
-	.remove = ipr_remove,
+	.remove = __devexit_p(ipr_remove),
 	.shutdown = ipr_shutdown,
 	.err_handler = &ipr_err_handler,
 };
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 992af05aacf..7af9bceb8aa 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1159,6 +1159,10 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
 		atomic_inc(&mp->stats.xid_not_found);
 		goto out;
 	}
+	if (ep->esb_stat & ESB_ST_COMPLETE) {
+		atomic_inc(&mp->stats.xid_not_found);
+		goto out;
+	}
 	if (ep->rxid == FC_XID_UNKNOWN)
 		ep->rxid = ntohs(fh->fh_rx_id);
 	if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 521f996f9b1..ad8b747837b 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1896,7 +1896,7 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
 		break;
 	case FC_CMD_ABORTED:
-		sc_cmd->result = (DID_ABORT << 16) | fsp->io_status;
+		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
 		break;
 	case FC_CMD_TIME_OUT:
 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 747d73c5c8a..7bfbff7e0ef 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -478,7 +478,7 @@ static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
 	if (PTR_ERR(fp) == -FC_EX_CLOSED)
 		return fc_rport_error(rport, fp);
 
-	if (rdata->retries < rdata->local_port->max_retry_count) {
+	if (rdata->retries < rdata->local_port->max_rport_retry_count) {
 		FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
 			       PTR_ERR(fp), fc_rport_state(rport));
 		rdata->retries++;
@@ -1330,7 +1330,7 @@ int fc_rport_init(struct fc_lport *lport)
 }
 EXPORT_SYMBOL(fc_rport_init);
 
-int fc_setup_rport()
+int fc_setup_rport(void)
 {
 	rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
 	if (!rport_event_queue)
@@ -1339,7 +1339,7 @@ int fc_setup_rport()
 }
 EXPORT_SYMBOL(fc_setup_rport);
 
-void fc_destroy_rport()
+void fc_destroy_rport(void)
 {
 	destroy_workqueue(rport_event_queue);
 }
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index e72b4ad47d3..59908aead53 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -81,7 +81,8 @@ inline void iscsi_conn_queue_work(struct iscsi_conn *conn)
 	struct Scsi_Host *shost = conn->session->host;
 	struct iscsi_host *ihost = shost_priv(shost);
 
-	queue_work(ihost->workq, &conn->xmitwork);
+	if (ihost->workq)
+		queue_work(ihost->workq, &conn->xmitwork);
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_queue_work);
 
@@ -109,11 +110,9 @@ iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr)
 		 * if the window closed with IO queued, then kick the
 		 * xmit thread
 		 */
-		if (!list_empty(&session->leadconn->xmitqueue) ||
-		    !list_empty(&session->leadconn->mgmtqueue)) {
-			if (!(session->tt->caps & CAP_DATA_PATH_OFFLOAD))
-				iscsi_conn_queue_work(session->leadconn);
-		}
+		if (!list_empty(&session->leadconn->cmdqueue) ||
+		    !list_empty(&session->leadconn->mgmtqueue))
+			iscsi_conn_queue_work(session->leadconn);
 	}
 }
 EXPORT_SYMBOL_GPL(iscsi_update_cmdsn);
@@ -257,9 +256,11 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 	itt_t itt;
 	int rc;
 
-	rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
-	if (rc)
-		return rc;
+	if (conn->session->tt->alloc_pdu) {
+		rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
+		if (rc)
+			return rc;
+	}
 	hdr = (struct iscsi_cmd *) task->hdr;
 	itt = hdr->itt;
 	memset(hdr, 0, sizeof(*hdr));
@@ -364,7 +365,6 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 		return -EIO;
 
 	task->state = ISCSI_TASK_RUNNING;
-	list_move_tail(&task->running, &conn->run_list);
 
 	conn->scsicmd_pdus_cnt++;
 	ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x "
@@ -380,26 +380,25 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 }
 
 /**
- * iscsi_complete_command - finish a task
+ * iscsi_free_task - free a task
  * @task: iscsi cmd task
  *
  * Must be called with session lock.
  * This function returns the scsi command to scsi-ml or cleans
  * up mgmt tasks then returns the task to the pool.
  */
-static void iscsi_complete_command(struct iscsi_task *task)
+static void iscsi_free_task(struct iscsi_task *task)
 {
 	struct iscsi_conn *conn = task->conn;
 	struct iscsi_session *session = conn->session;
 	struct scsi_cmnd *sc = task->sc;
 
+	ISCSI_DBG_SESSION(session, "freeing task itt 0x%x state %d sc %p\n",
+			  task->itt, task->state, task->sc);
+
 	session->tt->cleanup_task(task);
-	list_del_init(&task->running);
-	task->state = ISCSI_TASK_COMPLETED;
+	task->state = ISCSI_TASK_FREE;
 	task->sc = NULL;
-
-	if (conn->task == task)
-		conn->task = NULL;
 	/*
 	 * login task is preallocated so do not free
 	 */
@@ -408,9 +407,6 @@ static void iscsi_complete_command(struct iscsi_task *task)
 
 	__kfifo_put(session->cmdpool.queue, (void*)&task, sizeof(void*));
 
-	if (conn->ping_task == task)
-		conn->ping_task = NULL;
-
 	if (sc) {
 		task->sc = NULL;
 		/* SCSI eh reuses commands to verify us */
@@ -433,7 +429,7 @@ EXPORT_SYMBOL_GPL(__iscsi_get_task);
 static void __iscsi_put_task(struct iscsi_task *task)
 {
 	if (atomic_dec_and_test(&task->refcount))
-		iscsi_complete_command(task);
+		iscsi_free_task(task);
 }
 
 void iscsi_put_task(struct iscsi_task *task)
@@ -446,26 +442,74 @@ void iscsi_put_task(struct iscsi_task *task)
 }
 EXPORT_SYMBOL_GPL(iscsi_put_task);
 
+/**
+ * iscsi_complete_task - finish a task
+ * @task: iscsi cmd task
+ * @state: state to complete task with
+ *
+ * Must be called with session lock.
+ */
+static void iscsi_complete_task(struct iscsi_task *task, int state)
+{
+	struct iscsi_conn *conn = task->conn;
+
+	ISCSI_DBG_SESSION(conn->session,
+			  "complete task itt 0x%x state %d sc %p\n",
+			  task->itt, task->state, task->sc);
+	if (task->state == ISCSI_TASK_COMPLETED ||
+	    task->state == ISCSI_TASK_ABRT_TMF ||
+	    task->state == ISCSI_TASK_ABRT_SESS_RECOV)
+		return;
+	WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
+	task->state = state;
+
+	if (!list_empty(&task->running))
+		list_del_init(&task->running);
+
+	if (conn->task == task)
+		conn->task = NULL;
+
+	if (conn->ping_task == task)
+		conn->ping_task = NULL;
+
+	/* release get from queueing */
+	__iscsi_put_task(task);
+}
+
 /*
- * session lock must be held
+ * session lock must be held and if not called for a task that is
+ * still pending or from the xmit thread, then xmit thread must
+ * be suspended.
  */
-static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task,
-			 int err)
+static void fail_scsi_task(struct iscsi_task *task, int err)
 {
+	struct iscsi_conn *conn = task->conn;
 	struct scsi_cmnd *sc;
+	int state;
 
+	/*
+	 * if a command completes and we get a successful tmf response
+	 * we will hit this because the scsi eh abort code does not take
+	 * a ref to the task.
+	 */
 	sc = task->sc;
 	if (!sc)
 		return;
 
-	if (task->state == ISCSI_TASK_PENDING)
+	if (task->state == ISCSI_TASK_PENDING) {
 		/*
 		 * cmd never made it to the xmit thread, so we should not count
 		 * the cmd in the sequencing
 		 */
 		conn->session->queued_cmdsn--;
+		/* it was never sent so just complete like normal */
+		state = ISCSI_TASK_COMPLETED;
+	} else if (err == DID_TRANSPORT_DISRUPTED)
+		state = ISCSI_TASK_ABRT_SESS_RECOV;
+	else
+		state = ISCSI_TASK_ABRT_TMF;
 
-	sc->result = err;
+	sc->result = err << 16;
 	if (!scsi_bidi_cmnd(sc))
 		scsi_set_resid(sc, scsi_bufflen(sc));
 	else {
@@ -473,10 +517,7 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task,
 		scsi_in(sc)->resid = scsi_in(sc)->length;
 	}
 
-	if (conn->task == task)
-		conn->task = NULL;
-	/* release ref from queuecommand */
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, state);
 }
 
 static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
@@ -516,7 +557,6 @@ static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
 		session->state = ISCSI_STATE_LOGGING_OUT;
 
 	task->state = ISCSI_TASK_RUNNING;
-	list_move_tail(&task->running, &conn->mgmt_run_list);
 	ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x "
 			  "datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK,
 			  hdr->itt, task->data_count);
@@ -528,6 +568,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		      char *data, uint32_t data_size)
 {
 	struct iscsi_session *session = conn->session;
+	struct iscsi_host *ihost = shost_priv(session->host);
 	struct iscsi_task *task;
 	itt_t itt;
 
@@ -544,6 +585,9 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		 */
 		task = conn->login_task;
 	else {
+		if (session->state != ISCSI_STATE_LOGGED_IN)
+			return NULL;
+
 		BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
 		BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
 
@@ -559,6 +603,8 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	atomic_set(&task->refcount, 1);
 	task->conn = conn;
 	task->sc = NULL;
+	INIT_LIST_HEAD(&task->running);
+	task->state = ISCSI_TASK_PENDING;
 
 	if (data_size) {
 		memcpy(task->data, data, data_size);
@@ -566,11 +612,14 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	} else
 		task->data_count = 0;
 
-	if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
-		iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
-				 "pdu for mgmt task.\n");
-		goto requeue_task;
+	if (conn->session->tt->alloc_pdu) {
+		if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
+			iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
+					 "pdu for mgmt task.\n");
+			goto free_task;
+		}
 	}
+
 	itt = task->hdr->itt;
 	task->hdr_len = sizeof(struct iscsi_hdr);
 	memcpy(task->hdr, hdr, sizeof(struct iscsi_hdr));
@@ -583,30 +632,22 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 						   task->conn->session->age);
 	}
 
-	INIT_LIST_HEAD(&task->running);
-	list_add_tail(&task->running, &conn->mgmtqueue);
-
-	if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+	if (!ihost->workq) {
 		if (iscsi_prep_mgmt_task(conn, task))
 			goto free_task;
 
 		if (session->tt->xmit_task(task))
 			goto free_task;
-
-	} else
+	} else {
+		list_add_tail(&task->running, &conn->mgmtqueue);
 		iscsi_conn_queue_work(conn);
+	}
 
 	return task;
 
 free_task:
 	__iscsi_put_task(task);
 	return NULL;
-
-requeue_task:
-	if (task != conn->login_task)
-		__kfifo_put(session->cmdpool.queue, (void*)&task,
-			    sizeof(void*));
-	return NULL;
 }
 
 int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr,
@@ -701,11 +742,10 @@ invalid_datalen:
 			sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
 	}
 out:
-	ISCSI_DBG_SESSION(session, "done [sc %p res %d itt 0x%x]\n",
+	ISCSI_DBG_SESSION(session, "cmd rsp done [sc %p res %d itt 0x%x]\n",
 			  sc, sc->result, task->itt);
 	conn->scsirsp_pdus_cnt++;
-
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 }
 
 /**
@@ -724,6 +764,7 @@ iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
 		return;
 
+	iscsi_update_cmdsn(conn->session, (struct iscsi_nopin *)hdr);
 	sc->result = (DID_OK << 16) | rhdr->cmd_status;
 	conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1;
 	if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW |
@@ -738,8 +779,11 @@ iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
 	}
 
+	ISCSI_DBG_SESSION(conn->session, "data in with status done "
+			  "[sc %p res %d itt 0x%x]\n",
+			  sc, sc->result, task->itt);
 	conn->scsirsp_pdus_cnt++;
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 }
 
 static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
@@ -823,7 +867,7 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
  *
  * The session lock must be held.
  */
-static struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
+struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
 {
 	struct iscsi_session *session = conn->session;
 	int i;
@@ -840,6 +884,7 @@ static struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
 
 	return session->cmds[i];
 }
+EXPORT_SYMBOL_GPL(iscsi_itt_to_task);
 
 /**
  * __iscsi_complete_pdu - complete pdu
@@ -959,7 +1004,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		}
 
 		iscsi_tmf_rsp(conn, hdr);
-		__iscsi_put_task(task);
+		iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 		break;
 	case ISCSI_OP_NOOP_IN:
 		iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
@@ -977,7 +1022,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 			goto recv_pdu;
 
 		mod_timer(&conn->transport_timer, jiffies + conn->recv_timeout);
-		__iscsi_put_task(task);
+		iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 		break;
 	default:
 		rc = ISCSI_ERR_BAD_OPCODE;
@@ -989,7 +1034,7 @@ out:
 recv_pdu:
 	if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
 		rc = ISCSI_ERR_CONN_FAILED;
-	__iscsi_put_task(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(__iscsi_complete_pdu);
@@ -1166,7 +1211,12 @@ void iscsi_requeue_task(struct iscsi_task *task)
 {
 	struct iscsi_conn *conn = task->conn;
 
-	list_move_tail(&task->running, &conn->requeue);
+	/*
+	 * this may be on the requeue list already if the xmit_task callout
+	 * is handling the r2ts while we are adding new ones
+	 */
+	if (list_empty(&task->running))
+		list_add_tail(&task->running, &conn->requeue);
 	iscsi_conn_queue_work(conn);
 }
 EXPORT_SYMBOL_GPL(iscsi_requeue_task);
@@ -1206,6 +1256,7 @@ check_mgmt:
 	while (!list_empty(&conn->mgmtqueue)) {
 		conn->task = list_entry(conn->mgmtqueue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		if (iscsi_prep_mgmt_task(conn, conn->task)) {
 			__iscsi_put_task(conn->task);
 			conn->task = NULL;
@@ -1217,23 +1268,26 @@ check_mgmt:
 	}
 
 	/* process pending command queue */
-	while (!list_empty(&conn->xmitqueue)) {
+	while (!list_empty(&conn->cmdqueue)) {
 		if (conn->tmf_state == TMF_QUEUED)
 			break;
 
-		conn->task = list_entry(conn->xmitqueue.next,
+		conn->task = list_entry(conn->cmdqueue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
-			fail_command(conn, conn->task, DID_IMM_RETRY << 16);
+			fail_scsi_task(conn->task, DID_IMM_RETRY);
 			continue;
 		}
 		rc = iscsi_prep_scsi_cmd_pdu(conn->task);
 		if (rc) {
 			if (rc == -ENOMEM) {
+				list_add_tail(&conn->task->running,
+					      &conn->cmdqueue);
 				conn->task = NULL;
 				goto again;
 			} else
-				fail_command(conn, conn->task, DID_ABORT << 16);
+				fail_scsi_task(conn->task, DID_ABORT);
 			continue;
 		}
 		rc = iscsi_xmit_task(conn);
@@ -1260,8 +1314,8 @@ check_mgmt:
 
 		conn->task = list_entry(conn->requeue.next,
 					 struct iscsi_task, running);
+		list_del_init(&conn->task->running);
 		conn->task->state = ISCSI_TASK_RUNNING;
-		list_move_tail(conn->requeue.next, &conn->run_list);
 		rc = iscsi_xmit_task(conn);
 		if (rc)
 			goto again;
@@ -1328,6 +1382,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	struct iscsi_cls_session *cls_session;
 	struct Scsi_Host *host;
+	struct iscsi_host *ihost;
 	int reason = 0;
 	struct iscsi_session *session;
 	struct iscsi_conn *conn;
@@ -1338,6 +1393,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	sc->SCp.ptr = NULL;
 
 	host = sc->device->host;
+	ihost = shost_priv(host);
 	spin_unlock(host->host_lock);
 
 	cls_session = starget_to_session(scsi_target(sc->device));
@@ -1350,13 +1406,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 		goto fault;
 	}
 
-	/*
-	 * ISCSI_STATE_FAILED is a temp. state. The recovery
-	 * code will decide what is best to do with command queued
-	 * during this time
-	 */
-	if (session->state != ISCSI_STATE_LOGGED_IN &&
-	    session->state != ISCSI_STATE_FAILED) {
+	if (session->state != ISCSI_STATE_LOGGED_IN) {
 		/*
 		 * to handle the race between when we set the recovery state
 		 * and block the session we requeue here (commands could
@@ -1364,12 +1414,15 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 		 * up because the block code is not locked)
 		 */
 		switch (session->state) {
+		case ISCSI_STATE_FAILED:
 		case ISCSI_STATE_IN_RECOVERY:
 			reason = FAILURE_SESSION_IN_RECOVERY;
-			goto reject;
+			sc->result = DID_IMM_RETRY << 16;
+			break;
 		case ISCSI_STATE_LOGGING_OUT:
 			reason = FAILURE_SESSION_LOGGING_OUT;
-			goto reject;
+			sc->result = DID_IMM_RETRY << 16;
+			break;
 		case ISCSI_STATE_RECOVERY_FAILED:
 			reason = FAILURE_SESSION_RECOVERY_TIMEOUT;
 			sc->result = DID_TRANSPORT_FAILFAST << 16;
@@ -1402,9 +1455,8 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 		reason = FAILURE_OOM;
 		goto reject;
 	}
-	list_add_tail(&task->running, &conn->xmitqueue);
 
-	if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+	if (!ihost->workq) {
 		reason = iscsi_prep_scsi_cmd_pdu(task);
 		if (reason) {
 			if (reason == -ENOMEM) {
@@ -1419,8 +1471,10 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			reason = FAILURE_SESSION_NOT_READY;
 			goto prepd_reject;
 		}
-	} else
+	} else {
+		list_add_tail(&task->running, &conn->cmdqueue);
 		iscsi_conn_queue_work(conn);
+	}
 
 	session->queued_cmdsn++;
 	spin_unlock(&session->lock);
@@ -1429,7 +1483,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 
 prepd_reject:
 	sc->scsi_done = NULL;
-	iscsi_complete_command(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 reject:
 	spin_unlock(&session->lock);
 	ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n",
@@ -1439,7 +1493,7 @@ reject:
 
 prepd_fault:
 	sc->scsi_done = NULL;
-	iscsi_complete_command(task);
+	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
 fault:
 	spin_unlock(&session->lock);
 	ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n",
@@ -1608,44 +1662,24 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
  * Fail commands. session lock held and recv side suspended and xmit
  * thread flushed
  */
-static void fail_all_commands(struct iscsi_conn *conn, unsigned lun,
-			      int error)
+static void fail_scsi_tasks(struct iscsi_conn *conn, unsigned lun,
+			    int error)
 {
-	struct iscsi_task *task, *tmp;
-
-	if (conn->task) {
-		if (lun == -1 ||
-		    (conn->task->sc && conn->task->sc->device->lun == lun))
-			conn->task = NULL;
-	}
+	struct iscsi_task *task;
+	int i;
 
-	/* flush pending */
-	list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					  "failing pending sc %p itt 0x%x\n",
-					  task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
-	}
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		task = conn->session->cmds[i];
+		if (!task->sc || task->state == ISCSI_TASK_FREE)
+			continue;
 
-	list_for_each_entry_safe(task, tmp, &conn->requeue, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					  "failing requeued sc %p itt 0x%x\n",
-					  task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
-	}
+		if (lun != -1 && lun != task->sc->device->lun)
+			continue;
 
-	/* fail all other running */
-	list_for_each_entry_safe(task, tmp, &conn->run_list, running) {
-		if (lun == task->sc->device->lun || lun == -1) {
-			ISCSI_DBG_SESSION(conn->session,
-					 "failing in progress sc %p itt 0x%x\n",
-					 task->sc, task->itt);
-			fail_command(conn, task, error << 16);
-		}
+		ISCSI_DBG_SESSION(conn->session,
+				  "failing sc %p itt 0x%x state %d\n",
+				  task->sc, task->itt, task->state);
+		fail_scsi_task(task, error);
 	}
 }
 
@@ -1655,7 +1689,7 @@ void iscsi_suspend_tx(struct iscsi_conn *conn)
 	struct iscsi_host *ihost = shost_priv(shost);
 
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
+	if (ihost->workq)
 		flush_workqueue(ihost->workq);
 }
 EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
@@ -1663,8 +1697,23 @@ EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
 static void iscsi_start_tx(struct iscsi_conn *conn)
 {
 	clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
-	if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
-		iscsi_conn_queue_work(conn);
+	iscsi_conn_queue_work(conn);
+}
+
+/*
+ * We want to make sure a ping is in flight. It has timed out.
+ * And we are not busy processing a pdu that is making
+ * progress but got started before the ping and is taking a while
+ * to complete so the ping is just stuck behind it in a queue.
+ */
+static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
+{
+	if (conn->ping_task &&
+	    time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
+			   (conn->ping_timeout * HZ), jiffies))
+		return 1;
+	else
+		return 0;
 }
 
 static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
@@ -1702,16 +1751,20 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
 	 * if the ping timedout then we are in the middle of cleaning up
 	 * and can let the iscsi eh handle it
 	 */
-	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
-			    (conn->ping_timeout * HZ), jiffies))
+	if (iscsi_has_ping_timed_out(conn)) {
 		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
 	/*
 	 * if we are about to check the transport then give the command
 	 * more time
 	 */
 	if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ),
-			   jiffies))
+			   jiffies)) {
 		rc = BLK_EH_RESET_TIMER;
+		goto done;
+	}
+
 	/* if in the middle of checking the transport then give us more time */
 	if (conn->ping_task)
 		rc = BLK_EH_RESET_TIMER;
@@ -1738,13 +1791,13 @@ static void iscsi_check_transport_timeouts(unsigned long data)
 
 	recv_timeout *= HZ;
 	last_recv = conn->last_recv;
-	if (conn->ping_task &&
-	    time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
-			   jiffies)) {
+
+	if (iscsi_has_ping_timed_out(conn)) {
 		iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
-				  "expired, last rx %lu, last ping %lu, "
-				  "now %lu\n", conn->ping_timeout, last_recv,
-				  conn->last_ping, jiffies);
+				  "expired, recv timeout %d, last rx %lu, "
+				  "last ping %lu, now %lu\n",
+				  conn->ping_timeout, conn->recv_timeout,
+				  last_recv, conn->last_ping, jiffies);
 		spin_unlock(&session->lock);
 		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 		return;
@@ -1788,6 +1841,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
 
+	ISCSI_DBG_SESSION(session, "aborting sc %p\n", sc);
+
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
 	/*
@@ -1810,6 +1865,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	    sc->SCp.phase != session->age) {
 		spin_unlock_bh(&session->lock);
 		mutex_unlock(&session->eh_mutex);
+		ISCSI_DBG_SESSION(session, "failing abort due to dropped "
+				  "session.\n");
 		return FAILED;
 	}
 
@@ -1829,7 +1886,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 	}
 
 	if (task->state == ISCSI_TASK_PENDING) {
-		fail_command(conn, task, DID_ABORT << 16);
+		fail_scsi_task(task, DID_ABORT);
 		goto success;
 	}
 
@@ -1860,7 +1917,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		 * then sent more data for the cmd.
 		 */
 		spin_lock(&session->lock);
-		fail_command(conn, task, DID_ABORT << 16);
+		fail_scsi_task(task, DID_ABORT);
 		conn->tmf_state = TMF_INITIAL;
 		spin_unlock(&session->lock);
 		iscsi_start_tx(conn);
@@ -1967,7 +2024,7 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc)
 	iscsi_suspend_tx(conn);
 
 	spin_lock_bh(&session->lock);
-	fail_all_commands(conn, sc->device->lun, DID_ERROR);
+	fail_scsi_tasks(conn, sc->device->lun, DID_ERROR);
 	conn->tmf_state = TMF_INITIAL;
 	spin_unlock_bh(&session->lock);
 
@@ -2274,6 +2331,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
 		if (cmd_task_size)
 			task->dd_data = &task[1];
 		task->itt = cmd_i;
+		task->state = ISCSI_TASK_FREE;
 		INIT_LIST_HEAD(&task->running);
 	}
 
@@ -2360,10 +2418,8 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size,
 	conn->transport_timer.data = (unsigned long)conn;
 	conn->transport_timer.function = iscsi_check_transport_timeouts;
 
-	INIT_LIST_HEAD(&conn->run_list);
-	INIT_LIST_HEAD(&conn->mgmt_run_list);
 	INIT_LIST_HEAD(&conn->mgmtqueue);
-	INIT_LIST_HEAD(&conn->xmitqueue);
+	INIT_LIST_HEAD(&conn->cmdqueue);
 	INIT_LIST_HEAD(&conn->requeue);
 	INIT_WORK(&conn->xmitwork, iscsi_xmitworker);
 
@@ -2531,27 +2587,28 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
 EXPORT_SYMBOL_GPL(iscsi_conn_start);
 
 static void
-flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn)
+fail_mgmt_tasks(struct iscsi_session *session, struct iscsi_conn *conn)
 {
-	struct iscsi_task *task, *tmp;
+	struct iscsi_task *task;
+	int i, state;
 
-	/* handle pending */
-	list_for_each_entry_safe(task, tmp, &conn->mgmtqueue, running) {
-		ISCSI_DBG_SESSION(session, "flushing pending mgmt task "
-				  "itt 0x%x\n", task->itt);
-		/* release ref from prep task */
-		__iscsi_put_task(task);
-	}
+	for (i = 0; i < conn->session->cmds_max; i++) {
+		task = conn->session->cmds[i];
+		if (task->sc)
+			continue;
 
-	/* handle running */
-	list_for_each_entry_safe(task, tmp, &conn->mgmt_run_list, running) {
-		ISCSI_DBG_SESSION(session, "flushing running mgmt task "
-				  "itt 0x%x\n", task->itt);
-		/* release ref from prep task */
-		__iscsi_put_task(task);
-	}
+		if (task->state == ISCSI_TASK_FREE)
+			continue;
+
+		ISCSI_DBG_SESSION(conn->session,
+				  "failing mgmt itt 0x%x state %d\n",
+				  task->itt, task->state);
+		state = ISCSI_TASK_ABRT_SESS_RECOV;
+		if (task->state == ISCSI_TASK_PENDING)
+			state = ISCSI_TASK_COMPLETED;
+		iscsi_complete_task(task, state);
 
-	conn->task = NULL;
+	}
 }
 
 static void iscsi_start_session_recovery(struct iscsi_session *session,
@@ -2559,8 +2616,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 {
 	int old_stop_stage;
 
-	del_timer_sync(&conn->transport_timer);
-
 	mutex_lock(&session->eh_mutex);
 	spin_lock_bh(&session->lock);
 	if (conn->stop_stage == STOP_CONN_TERM) {
@@ -2578,13 +2633,17 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 		session->state = ISCSI_STATE_TERMINATE;
 	else if (conn->stop_stage != STOP_CONN_RECOVER)
 		session->state = ISCSI_STATE_IN_RECOVERY;
+	spin_unlock_bh(&session->lock);
+
+	del_timer_sync(&conn->transport_timer);
+	iscsi_suspend_tx(conn);
 
+	spin_lock_bh(&session->lock);
 	old_stop_stage = conn->stop_stage;
 	conn->stop_stage = flag;
 	conn->c_stage = ISCSI_CONN_STOPPED;
 	spin_unlock_bh(&session->lock);
 
-	iscsi_suspend_tx(conn);
 	/*
 	 * for connection level recovery we should not calculate
 	 * header digest. conn->hdr_size used for optimization
@@ -2605,11 +2664,8 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
 	 * flush queues.
 	 */
 	spin_lock_bh(&session->lock);
-	if (flag == STOP_CONN_RECOVER)
-		fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED);
-	else
-		fail_all_commands(conn, -1, DID_ERROR);
-	flush_control_queues(session, conn);
+	fail_scsi_tasks(conn, -1, DID_TRANSPORT_DISRUPTED);
+	fail_mgmt_tasks(session, conn);
 	spin_unlock_bh(&session->lock);
 	mutex_unlock(&session->eh_mutex);
 }
@@ -2651,6 +2707,23 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_bind);
 
+static int iscsi_switch_str_param(char **param, char *new_val_buf)
+{
+	char *new_val;
+
+	if (*param) {
+		if (!strcmp(*param, new_val_buf))
+			return 0;
+	}
+
+	new_val = kstrdup(new_val_buf, GFP_NOIO);
+	if (!new_val)
+		return -ENOMEM;
+
+	kfree(*param);
+	*param = new_val;
+	return 0;
+}
 
 int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		    enum iscsi_param param, char *buf, int buflen)
@@ -2723,38 +2796,15 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		sscanf(buf, "%u", &conn->exp_statsn);
 		break;
 	case ISCSI_PARAM_USERNAME:
-		kfree(session->username);
-		session->username = kstrdup(buf, GFP_KERNEL);
-		if (!session->username)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->username, buf);
 	case ISCSI_PARAM_USERNAME_IN:
-		kfree(session->username_in);
-		session->username_in = kstrdup(buf, GFP_KERNEL);
-		if (!session->username_in)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->username_in, buf);
 	case ISCSI_PARAM_PASSWORD:
-		kfree(session->password);
-		session->password = kstrdup(buf, GFP_KERNEL);
-		if (!session->password)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->password, buf);
 	case ISCSI_PARAM_PASSWORD_IN:
-		kfree(session->password_in);
-		session->password_in = kstrdup(buf, GFP_KERNEL);
-		if (!session->password_in)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->password_in, buf);
 	case ISCSI_PARAM_TARGET_NAME:
-		/* this should not change between logins */
-		if (session->targetname)
-			break;
-
-		session->targetname = kstrdup(buf, GFP_KERNEL);
-		if (!session->targetname)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&session->targetname, buf);
 	case ISCSI_PARAM_TPGT:
 		sscanf(buf, "%d", &session->tpgt);
 		break;
@@ -2762,25 +2812,11 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		sscanf(buf, "%d", &conn->persistent_port);
 		break;
 	case ISCSI_PARAM_PERSISTENT_ADDRESS:
-		/*
-		 * this is the address returned in discovery so it should
-		 * not change between logins.
-		 */
-		if (conn->persistent_address)
-			break;
-
-		conn->persistent_address = kstrdup(buf, GFP_KERNEL);
-		if (!conn->persistent_address)
-			return -ENOMEM;
-		break;
+		return iscsi_switch_str_param(&conn->persistent_address, buf);
 	case ISCSI_PARAM_IFACE_NAME:
-		if (!session->ifacename)
-			session->ifacename = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&session->ifacename, buf);
 	case ISCSI_PARAM_INITIATOR_NAME:
-		if (!session->initiatorname)
-			session->initiatorname = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&session->initiatorname, buf);
 	default:
 		return -ENOSYS;
 	}
@@ -2851,10 +2887,7 @@ int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
 		len = sprintf(buf, "%s\n", session->ifacename);
 		break;
 	case ISCSI_PARAM_INITIATOR_NAME:
-		if (!session->initiatorname)
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n", session->initiatorname);
+		len = sprintf(buf, "%s\n", session->initiatorname);
 		break;
 	default:
 		return -ENOSYS;
@@ -2920,29 +2953,16 @@ int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param,
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		if (!ihost->netdev)
-			len = sprintf(buf, "%s\n", "default");
-		else
-			len = sprintf(buf, "%s\n", ihost->netdev);
+		len = sprintf(buf, "%s\n", ihost->netdev);
 		break;
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		if (!ihost->hwaddress)
-			len = sprintf(buf, "%s\n", "default");
-		else
-			len = sprintf(buf, "%s\n", ihost->hwaddress);
+		len = sprintf(buf, "%s\n", ihost->hwaddress);
 		break;
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		if (!ihost->initiatorname)
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n", ihost->initiatorname);
+		len = sprintf(buf, "%s\n", ihost->initiatorname);
 		break;
 	case ISCSI_HOST_PARAM_IPADDRESS:
-		if (!strlen(ihost->local_address))
-			len = sprintf(buf, "%s\n", "unknown");
-		else
-			len = sprintf(buf, "%s\n",
-				      ihost->local_address);
+		len = sprintf(buf, "%s\n", ihost->local_address);
 		break;
 	default:
 		return -ENOSYS;
@@ -2959,17 +2979,11 @@ int iscsi_host_set_param(struct Scsi_Host *shost, enum iscsi_host_param param,
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		if (!ihost->netdev)
-			ihost->netdev = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->netdev, buf);
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		if (!ihost->hwaddress)
-			ihost->hwaddress = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->hwaddress, buf);
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		if (!ihost->initiatorname)
-			ihost->initiatorname = kstrdup(buf, GFP_KERNEL);
-		break;
+		return iscsi_switch_str_param(&ihost->initiatorname, buf);
 	default:
 		return -ENOSYS;
 	}
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index b579ca9f483..2bc07090321 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -440,8 +440,8 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task)
 	struct iscsi_tcp_task *tcp_task = task->dd_data;
 	struct iscsi_r2t_info *r2t;
 
-	/* nothing to do for mgmt or pending tasks */
-	if (!task->sc || task->state == ISCSI_TASK_PENDING)
+	/* nothing to do for mgmt */
+	if (!task->sc)
 		return;
 
 	/* flush task's r2t queues */
@@ -473,7 +473,13 @@ static int iscsi_tcp_data_in(struct iscsi_conn *conn, struct iscsi_task *task)
 	int datasn = be32_to_cpu(rhdr->datasn);
 	unsigned total_in_length = scsi_in(task->sc)->length;
 
-	iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+	/*
+	 * lib iscsi will update this in the completion handling if there
+	 * is status.
+	 */
+	if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
+		iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+
 	if (tcp_conn->in.datalen == 0)
 		return 0;
 
@@ -857,6 +863,12 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb,
 	int rc = 0;
 
 	ISCSI_DBG_TCP(conn, "in %d bytes\n", skb->len - offset);
+	/*
+	 * Update for each skb instead of pdu, because over slow networks a
+	 * data_in's data could take a while to read in. We also want to
+	 * account for r2ts.
+	 */
+	conn->last_recv = jiffies;
 
 	if (unlikely(conn->suspend_rx)) {
 		ISCSI_DBG_TCP(conn, "Rx suspended!\n");
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 3da02e43678..54fa1e42dc4 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1927,21 +1927,21 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	/* do we need to support multiple segments? */
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk("%s: multiple segments req %u %u, rsp %u %u\n",
-		       __func__, req->bio->bi_vcnt, req->data_len,
-		       rsp->bio->bi_vcnt, rsp->data_len);
+		       __func__, req->bio->bi_vcnt, blk_rq_bytes(req),
+		       rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
 		return -EINVAL;
 	}
 
-	ret = smp_execute_task(dev, bio_data(req->bio), req->data_len,
-			       bio_data(rsp->bio), rsp->data_len);
+	ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req),
+			       bio_data(rsp->bio), blk_rq_bytes(rsp));
 	if (ret > 0) {
 		/* positive number is the untransferred residual */
-		rsp->data_len = ret;
-		req->data_len = 0;
+		rsp->resid_len = ret;
+		req->resid_len = 0;
 		ret = 0;
 	} else if (ret == 0) {
-		rsp->data_len = 0;
-		req->data_len = 0;
+		rsp->resid_len = 0;
+		req->resid_len = 0;
 	}
 
 	return ret;
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index d110a366c48..1bc3b756799 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -134,24 +134,24 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 {
 	u8 *req_data = NULL, *resp_data = NULL, *buf;
 	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
-	int error = -EINVAL, resp_data_len = rsp->data_len;
+	int error = -EINVAL;
 
 	/* eight is the minimum size for request and response frames */
-	if (req->data_len < 8 || rsp->data_len < 8)
+	if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
 		goto out;
 
-	if (bio_offset(req->bio) + req->data_len > PAGE_SIZE ||
-	    bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) {
+	if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
+	    bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
 		shost_printk(KERN_ERR, shost,
 			"SMP request/response frame crosses page boundary");
 		goto out;
 	}
 
-	req_data = kzalloc(req->data_len, GFP_KERNEL);
+	req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
 
 	/* make sure frame can always be built ... we copy
 	 * back only the requested length */
-	resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL);
+	resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
 
 	if (!req_data || !resp_data) {
 		error = -ENOMEM;
@@ -160,7 +160,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 
 	local_irq_disable();
 	buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
-	memcpy(req_data, buf, req->data_len);
+	memcpy(req_data, buf, blk_rq_bytes(req));
 	kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
 	local_irq_enable();
 
@@ -178,15 +178,15 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 
 	switch (req_data[1]) {
 	case SMP_REPORT_GENERAL:
-		req->data_len -= 8;
-		resp_data_len -= 32;
+		req->resid_len -= 8;
+		rsp->resid_len -= 32;
 		resp_data[2] = SMP_RESP_FUNC_ACC;
 		resp_data[9] = sas_ha->num_phys;
 		break;
 
 	case SMP_REPORT_MANUF_INFO:
-		req->data_len -= 8;
-		resp_data_len -= 64;
+		req->resid_len -= 8;
+		rsp->resid_len -= 64;
 		resp_data[2] = SMP_RESP_FUNC_ACC;
 		memcpy(resp_data + 12, shost->hostt->name,
 		       SAS_EXPANDER_VENDOR_ID_LEN);
@@ -199,13 +199,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 		break;
 
 	case SMP_DISCOVER:
-		req->data_len -= 16;
-		if ((int)req->data_len < 0) {
-			req->data_len = 0;
+		req->resid_len -= 16;
+		if ((int)req->resid_len < 0) {
+			req->resid_len = 0;
 			error = -EINVAL;
 			goto out;
 		}
-		resp_data_len -= 56;
+		rsp->resid_len -= 56;
 		sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
 		break;
 
@@ -215,13 +215,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 		break;
 
 	case SMP_REPORT_PHY_SATA:
-		req->data_len -= 16;
-		if ((int)req->data_len < 0) {
-			req->data_len = 0;
+		req->resid_len -= 16;
+		if ((int)req->resid_len < 0) {
+			req->resid_len = 0;
 			error = -EINVAL;
 			goto out;
 		}
-		resp_data_len -= 60;
+		rsp->resid_len -= 60;
 		sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
 		break;
 
@@ -238,13 +238,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 		break;
 
 	case SMP_PHY_CONTROL:
-		req->data_len -= 44;
-		if ((int)req->data_len < 0) {
-			req->data_len = 0;
+		req->resid_len -= 44;
+		if ((int)req->resid_len < 0) {
+			req->resid_len = 0;
 			error = -EINVAL;
 			goto out;
 		}
-		resp_data_len -= 8;
+		rsp->resid_len -= 8;
 		sas_phy_control(sas_ha, req_data[9], req_data[10],
 				req_data[32] >> 4, req_data[33] >> 4,
 				resp_data);
@@ -261,11 +261,10 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
 
 	local_irq_disable();
 	buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
-	memcpy(buf, resp_data, rsp->data_len);
+	memcpy(buf, resp_data, blk_rq_bytes(rsp));
 	flush_kernel_dcache_page(bio_page(rsp->bio));
 	kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
 	local_irq_enable();
-	rsp->data_len = resp_data_len;
 
  out:
 	kfree(req_data);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1105f9a111b..54056984909 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -23,6 +23,13 @@
 
 struct lpfc_sli2_slim;
 
+#define LPFC_PCI_DEV_LP		0x1
+#define LPFC_PCI_DEV_OC		0x2
+
+#define LPFC_SLI_REV2		2
+#define LPFC_SLI_REV3		3
+#define LPFC_SLI_REV4		4
+
 #define LPFC_MAX_TARGET		4096	/* max number of targets supported */
 #define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
 					   requests */
@@ -98,9 +105,11 @@ struct lpfc_dma_pool {
 };
 
 struct hbq_dmabuf {
+	struct lpfc_dmabuf hbuf;
 	struct lpfc_dmabuf dbuf;
 	uint32_t size;
 	uint32_t tag;
+	struct lpfc_rcqe rcqe;
 };
 
 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
@@ -134,7 +143,10 @@ typedef struct lpfc_vpd {
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t rsvd3  :19;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
@@ -152,7 +164,10 @@ typedef struct lpfc_vpd {
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd3  :19;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;
@@ -264,8 +279,8 @@ enum hba_state {
 };
 
 struct lpfc_vport {
-	struct list_head listentry;
 	struct lpfc_hba *phba;
+	struct list_head listentry;
 	uint8_t port_type;
 #define LPFC_PHYSICAL_PORT 1
 #define LPFC_NPIV_PORT  2
@@ -273,6 +288,9 @@ struct lpfc_vport {
 	enum discovery_state port_state;
 
 	uint16_t vpi;
+	uint16_t vfi;
+	uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED	0x1
 
 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
@@ -385,6 +403,9 @@ struct lpfc_vport {
 #endif
 	uint8_t stat_data_enabled;
 	uint8_t stat_data_blocked;
+	struct list_head rcv_buffer_list;
+	uint32_t vport_flag;
+#define STATIC_VPORT	1
 };
 
 struct hbq_s {
@@ -420,8 +441,66 @@ enum intr_type_t {
 };
 
 struct lpfc_hba {
+	/* SCSI interface function jump table entries */
+	int (*lpfc_new_scsi_buf)
+		(struct lpfc_vport *, int);
+	struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+		(struct lpfc_hba *);
+	int (*lpfc_scsi_prep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_scsi_unprep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_release_scsi_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	void (*lpfc_rampdown_queue_depth)
+		(struct lpfc_hba *);
+	void (*lpfc_scsi_prep_cmnd)
+		(struct lpfc_vport *, struct lpfc_scsi_buf *,
+		 struct lpfc_nodelist *);
+	int (*lpfc_scsi_prep_task_mgmt_cmd)
+		(struct lpfc_vport *, struct lpfc_scsi_buf *,
+		 unsigned int, uint8_t);
+
+	/* IOCB interface function jump table entries */
+	int (*__lpfc_sli_issue_iocb)
+		(struct lpfc_hba *, uint32_t,
+		 struct lpfc_iocbq *, uint32_t);
+	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+			 struct lpfc_iocbq *);
+	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+
+
+	IOCB_t * (*lpfc_get_iocb_from_iocbq)
+		(struct lpfc_iocbq *);
+	void (*lpfc_scsi_cmd_iocb_cmpl)
+		(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+	/* MBOX interface function jump table entries */
+	int (*lpfc_sli_issue_mbox)
+		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+	/* Slow-path IOCB process function jump table entries */
+	void (*lpfc_sli_handle_slow_ring_event)
+		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+		 uint32_t mask);
+	/* INIT device interface function jump table entries */
+	int (*lpfc_sli_hbq_to_firmware)
+		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+	int (*lpfc_sli_brdrestart)
+		(struct lpfc_hba *);
+	int (*lpfc_sli_brdready)
+		(struct lpfc_hba *, uint32_t);
+	void (*lpfc_handle_eratt)
+		(struct lpfc_hba *);
+	void (*lpfc_stop_port)
+		(struct lpfc_hba *);
+
+
+	/* SLI4 specific HBA data structure */
+	struct lpfc_sli4_hba sli4_hba;
+
 	struct lpfc_sli sli;
-	uint32_t sli_rev;		/* SLI2 or SLI3 */
+	uint8_t pci_dev_grp;	/* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+	uint32_t sli_rev;		/* SLI2, SLI3, or SLI4 */
 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
 #define LPFC_SLI3_HBQ_ENABLED		0x01
 #define LPFC_SLI3_NPIV_ENABLED		0x02
@@ -429,6 +508,7 @@ struct lpfc_hba {
 #define LPFC_SLI3_CRP_ENABLED		0x08
 #define LPFC_SLI3_INB_ENABLED		0x10
 #define LPFC_SLI3_BG_ENABLED		0x20
+#define LPFC_SLI3_DSS_ENABLED		0x40
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
@@ -442,8 +522,13 @@ struct lpfc_hba {
 
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT		0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT	0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER	0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT	0x20
+#define ELS_XRI_ABORT_EVENT	0x40
+#define ASYNC_EVENT		0x80
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -502,6 +587,9 @@ struct lpfc_hba {
 	uint32_t cfg_poll;
 	uint32_t cfg_poll_tmo;
 	uint32_t cfg_use_msi;
+	uint32_t cfg_fcp_imax;
+	uint32_t cfg_fcp_wq_count;
+	uint32_t cfg_fcp_eq_count;
 	uint32_t cfg_sg_seg_cnt;
 	uint32_t cfg_prot_sg_seg_cnt;
 	uint32_t cfg_sg_dma_buf_size;
@@ -511,6 +599,8 @@ struct lpfc_hba {
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;
 	uint32_t cfg_enable_bg;
+	uint32_t cfg_enable_fip;
+	uint32_t cfg_log_verbose;
 
 	lpfc_vpd_t vpd;		/* vital product data */
 
@@ -526,11 +616,12 @@ struct lpfc_hba {
 	unsigned long data_flags;
 
 	uint32_t hbq_in_use;		/* HBQs in use flag */
-	struct list_head hbqbuf_in_list;  /* in-fly hbq buffer list */
+	struct list_head rb_pend_list;  /* Received buffers to be processed */
 	uint32_t hbq_count;	        /* Count of configured HBQs */
 	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */
 
 	unsigned long pci_bar0_map;     /* Physical address for PCI BAR0 */
+	unsigned long pci_bar1_map;     /* Physical address for PCI BAR1 */
 	unsigned long pci_bar2_map;     /* Physical address for PCI BAR2 */
 	void __iomem *slim_memmap_p;	/* Kernel memory mapped address for
 					   PCI BAR0 */
@@ -593,7 +684,8 @@ struct lpfc_hba {
 	/* pci_mem_pools */
 	struct pci_pool *lpfc_scsi_dma_buf_pool;
 	struct pci_pool *lpfc_mbuf_pool;
-	struct pci_pool *lpfc_hbq_pool;
+	struct pci_pool *lpfc_hrb_pool;	/* header receive buffer pool */
+	struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
 
 	mempool_t *mbox_mem_pool;
@@ -609,6 +701,14 @@ struct lpfc_hba {
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
 #define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
+	uint16_t max_vports;            /*
+					 * For IOV HBAs max_vpi can change
+					 * after a reset. max_vports is max
+					 * number of vports present. This can
+					 * be greater than max_vpi.
+					 */
+	uint16_t vpi_base;
+	uint16_t vfi_base;
 	unsigned long *vpi_bmask;	/* vpi allocation table */
 
 	/* Data structure used by fabric iocb scheduler */
@@ -667,6 +767,11 @@ struct lpfc_hba {
 /* Maximum number of events that can be outstanding at any time*/
 #define LPFC_MAX_EVT_COUNT 512
 	atomic_t fast_event_count;
+	struct lpfc_fcf fcf;
+	uint8_t fc_map[3];
+	uint8_t valid_vlan;
+	uint16_t vlan_id;
+	struct list_head fcf_conn_rec_list;
 };
 
 static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cbdb12..d73e677201f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -30,8 +30,10 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -505,12 +507,14 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 		return -ENOMEM;
 
 	memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
-	pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
-	pmboxq->mb.mbxOwner = OWN_HOST;
+	pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
+	pmboxq->u.mb.mbxOwner = OWN_HOST;
 
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
 
-	if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+	if ((mbxstatus == MBX_SUCCESS) &&
+	    (pmboxq->u.mb.mbxStatus == 0 ||
+	     pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
 		memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 		lpfc_init_link(phba, pmboxq, phba->cfg_topology,
 			       phba->cfg_link_speed);
@@ -789,7 +793,8 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		  uint32_t *mrpi, uint32_t *arpi,
 		  uint32_t *mvpi, uint32_t *avpi)
 {
-	struct lpfc_sli   *psli = &phba->sli;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mbx_read_config *rd_config;
 	LPFC_MBOXQ_t *pmboxq;
 	MAILBOX_t *pmb;
 	int rc = 0;
@@ -800,7 +805,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
-	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+	    (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
 		return 0;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -811,13 +816,13 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		return 0;
 	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_CONFIG;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
 
 	if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = MBX_NOT_FINISHED;
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -828,18 +833,37 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		return 0;
 	}
 
-	if (mrpi)
-		*mrpi = pmb->un.varRdConfig.max_rpi;
-	if (arpi)
-		*arpi = pmb->un.varRdConfig.avail_rpi;
-	if (mxri)
-		*mxri = pmb->un.varRdConfig.max_xri;
-	if (axri)
-		*axri = pmb->un.varRdConfig.avail_xri;
-	if (mvpi)
-		*mvpi = pmb->un.varRdConfig.max_vpi;
-	if (avpi)
-		*avpi = pmb->un.varRdConfig.avail_vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rd_config = &pmboxq->u.mqe.un.rd_config;
+		if (mrpi)
+			*mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		if (arpi)
+			*arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.rpi_used;
+		if (mxri)
+			*mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		if (axri)
+			*axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.xri_used;
+		if (mvpi)
+			*mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		if (avpi)
+			*avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.vpi_used;
+	} else {
+		if (mrpi)
+			*mrpi = pmb->un.varRdConfig.max_rpi;
+		if (arpi)
+			*arpi = pmb->un.varRdConfig.avail_rpi;
+		if (mxri)
+			*mxri = pmb->un.varRdConfig.max_xri;
+		if (axri)
+			*axri = pmb->un.varRdConfig.avail_xri;
+		if (mvpi)
+			*mvpi = pmb->un.varRdConfig.max_vpi;
+		if (avpi)
+			*avpi = pmb->un.varRdConfig.avail_vpi;
+	}
 
 	mempool_free(pmboxq, phba->mbox_mem_pool);
 	return 1;
@@ -2021,22 +2045,9 @@ static DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
 # lpfc_log_verbose: Only turn this flag on if you are willing to risk being
 # deluged with LOTS of information.
 # You can set a bit mask to record specific types of verbose messages:
-#
-# LOG_ELS                       0x1        ELS events
-# LOG_DISCOVERY                 0x2        Link discovery events
-# LOG_MBOX                      0x4        Mailbox events
-# LOG_INIT                      0x8        Initialization events
-# LOG_LINK_EVENT                0x10       Link events
-# LOG_FCP                       0x40       FCP traffic history
-# LOG_NODE                      0x80       Node table events
-# LOG_BG                        0x200      BlockBuard events
-# LOG_MISC                      0x400      Miscellaneous events
-# LOG_SLI                       0x800      SLI events
-# LOG_FCP_ERROR                 0x1000     Only log FCP errors
-# LOG_LIBDFC                    0x2000     LIBDFC events
-# LOG_ALL_MSG                   0xffff     LOG all messages
+# See lpfc_logmsh.h for definitions.
 */
-LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff,
+LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
 		       "Verbose logging bit-mask");
 
 /*
@@ -2266,6 +2277,36 @@ lpfc_param_init(topology, 0, 0, 6)
 static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
 		lpfc_topology_show, lpfc_topology_store);
 
+/**
+ * lpfc_static_vport_show: Read callback function for
+ *   lpfc_static_vport sysfs file.
+ * @dev: Pointer to class device object.
+ * @attr: device attribute structure.
+ * @buf: Data buffer.
+ *
+ * This function is the read call back function for
+ * lpfc_static_vport sysfs file. The lpfc_static_vport
+ * sysfs file report the mageability of the vport.
+ **/
+static ssize_t
+lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	if (vport->vport_flag & STATIC_VPORT)
+		sprintf(buf, "1\n");
+	else
+		sprintf(buf, "0\n");
+
+	return strlen(buf);
+}
+
+/*
+ * Sysfs attribute to control the statistical data collection.
+ */
+static DEVICE_ATTR(lpfc_static_vport, S_IRUGO,
+		   lpfc_static_vport_show, NULL);
 
 /**
  * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
@@ -2341,7 +2382,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 		if (vports == NULL)
 			return -ENOMEM;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(v_shost->host_lock);
 			/* Block and reset data collection */
@@ -2356,7 +2397,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 		phba->bucket_base = base;
 		phba->bucket_step = step;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 
 			/* Unblock data collection */
@@ -2373,7 +2414,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 		if (vports == NULL)
 			return -ENOMEM;
 
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			v_shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->stat_data_blocked = 1;
@@ -2844,15 +2885,39 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
 /*
 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
 #		support this feature
-#       0  = MSI disabled
+#       0  = MSI disabled (default)
 #       1  = MSI enabled
-#       2  = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+#       2  = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
 */
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
 /*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+	    "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+	    "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+	    "Set the number of fast-path FCP event queues, if possible");
+
+/*
 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
 #       0  = HBA resets disabled
 #       1  = HBA resets enabled (default)
@@ -2876,6 +2941,14 @@ LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
 */
 LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
 
+/*
+# lpfc_enable_fip: When set, FIP is required to start discovery. If not
+# set, the driver will add an FCF record manually if the port has no
+# FCF records available and start discovery.
+# Value range is [0,1]. Default value is 1 (enabled)
+*/
+LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery");
+
 
 /*
 # lpfc_prot_mask: i
@@ -2942,6 +3015,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_peer_port_login,
 	&dev_attr_lpfc_nodev_tmo,
 	&dev_attr_lpfc_devloss_tmo,
+	&dev_attr_lpfc_enable_fip,
 	&dev_attr_lpfc_fcp_class,
 	&dev_attr_lpfc_use_adisc,
 	&dev_attr_lpfc_ack0,
@@ -2969,6 +3043,9 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_poll,
 	&dev_attr_lpfc_poll_tmo,
 	&dev_attr_lpfc_use_msi,
+	&dev_attr_lpfc_fcp_imax,
+	&dev_attr_lpfc_fcp_wq_count,
+	&dev_attr_lpfc_fcp_eq_count,
 	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
 	&dev_attr_lpfc_soft_wwpn,
@@ -2991,6 +3068,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_lun_queue_depth,
 	&dev_attr_lpfc_nodev_tmo,
 	&dev_attr_lpfc_devloss_tmo,
+	&dev_attr_lpfc_enable_fip,
 	&dev_attr_lpfc_hba_queue_depth,
 	&dev_attr_lpfc_peer_port_login,
 	&dev_attr_lpfc_restrict_login,
@@ -3003,6 +3081,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_enable_da_id,
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
+	&dev_attr_lpfc_static_vport,
 	NULL,
 };
 
@@ -3199,7 +3278,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 		}
 	}
 
-	memcpy((uint8_t *) & phba->sysfs_mbox.mbox->mb + off,
+	memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off,
 	       buf, count);
 
 	phba->sysfs_mbox.offset = off + count;
@@ -3241,6 +3320,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 	int rc;
+	MAILBOX_t *pmb;
 
 	if (off > MAILBOX_CMD_SIZE)
 		return -ERANGE;
@@ -3265,8 +3345,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	if (off == 0 &&
 	    phba->sysfs_mbox.state  == SMBOX_WRITING &&
 	    phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
-
-		switch (phba->sysfs_mbox.mbox->mb.mbxCommand) {
+		pmb = &phba->sysfs_mbox.mbox->u.mb;
+		switch (pmb->mbxCommand) {
 			/* Offline only */
 		case MBX_INIT_LINK:
 		case MBX_DOWN_LINK:
@@ -3283,7 +3363,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 			if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
 				printk(KERN_WARNING "mbox_read:Command 0x%x "
 				       "is illegal in on-line state\n",
-				       phba->sysfs_mbox.mbox->mb.mbxCommand);
+				       pmb->mbxCommand);
 				sysfs_mbox_idle(phba);
 				spin_unlock_irq(&phba->hbalock);
 				return -EPERM;
@@ -3319,13 +3399,13 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		case MBX_CONFIG_PORT:
 		case MBX_RUN_BIU_DIAG:
 			printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n",
-			       phba->sysfs_mbox.mbox->mb.mbxCommand);
+			       pmb->mbxCommand);
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EPERM;
 		default:
 			printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n",
-			       phba->sysfs_mbox.mbox->mb.mbxCommand);
+			       pmb->mbxCommand);
 			sysfs_mbox_idle(phba);
 			spin_unlock_irq(&phba->hbalock);
 			return -EPERM;
@@ -3335,14 +3415,14 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		 * or RESTART mailbox commands until the HBA is restarted.
 		 */
 		if (phba->pport->stopped &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS &&
-		    phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN)
+		    pmb->mbxCommand != MBX_DUMP_MEMORY &&
+		    pmb->mbxCommand != MBX_RESTART &&
+		    pmb->mbxCommand != MBX_WRITE_VPARMS &&
+		    pmb->mbxCommand != MBX_WRITE_WWN)
 			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 					"1259 mbox: Issued mailbox cmd "
 					"0x%x while in stopped state.\n",
-					phba->sysfs_mbox.mbox->mb.mbxCommand);
+					pmb->mbxCommand);
 
 		phba->sysfs_mbox.mbox->vport = vport;
 
@@ -3356,7 +3436,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		}
 
 		if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		    (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE))){
+		    (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
 
 			spin_unlock_irq(&phba->hbalock);
 			rc = lpfc_sli_issue_mbox (phba,
@@ -3368,8 +3448,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 			spin_unlock_irq(&phba->hbalock);
 			rc = lpfc_sli_issue_mbox_wait (phba,
 						       phba->sysfs_mbox.mbox,
-				lpfc_mbox_tmo_val(phba,
-				    phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
+				lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
 			spin_lock_irq(&phba->hbalock);
 		}
 
@@ -3391,7 +3470,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		return -EAGAIN;
 	}
 
-	memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
+	memcpy(buf, (uint8_t *) &pmb + off, count);
 
 	phba->sysfs_mbox.offset = off + count;
 
@@ -3585,6 +3664,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 			case LA_8GHZ_LINK:
 				fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
 			break;
+			case LA_10GHZ_LINK:
+				fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+			break;
 			default:
 				fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;
@@ -3652,7 +3734,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	 */
 	if (phba->link_state < LPFC_LINK_DOWN ||
 	    !phba->mbox_mem_pool ||
-	    (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+	    (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
 		return NULL;
 
 	if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -3663,14 +3745,14 @@ lpfc_get_stats(struct Scsi_Host *shost)
 		return NULL;
 	memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmboxq->context1 = NULL;
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3695,7 +3777,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3769,7 +3851,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 		return;
 	memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
 
-	pmb = &pmboxq->mb;
+	pmb = &pmboxq->u.mb;
 	pmb->mbxCommand = MBX_READ_STATUS;
 	pmb->mbxOwner = OWN_HOST;
 	pmb->un.varWords[0] = 0x1; /* reset request */
@@ -3777,7 +3859,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3795,7 +3877,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
 	else
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3962,6 +4044,21 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
 		lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
 }
 
+/**
+ * lpfc_hba_log_verbose_init - Set hba's log verbose level
+ * @phba: Pointer to lpfc_hba struct.
+ *
+ * This function is called by the lpfc_get_cfgparam() routine to set the
+ * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
+ * log messsage according to the module's lpfc_log_verbose parameter setting
+ * before hba port or vport created.
+ **/
+static void
+lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
+{
+	phba->cfg_log_verbose = verbose;
+}
+
 struct fc_function_template lpfc_transport_functions = {
 	/* fixed attributes the driver supports */
 	.show_host_node_name = 1,
@@ -4105,6 +4202,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
+	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+	lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
 	lpfc_enable_bg_init(phba, lpfc_enable_bg);
@@ -4113,26 +4213,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	phba->cfg_soft_wwpn = 0L;
 	lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
 	lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
-	/*
-	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
-	 * used to create the sg_dma_buf_pool must be dynamically calculated.
-	 * 2 segments are added since the IOCB needs a command and response bde.
-	 */
-	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
-			sizeof(struct fcp_rsp) +
-			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
-
-	if (phba->cfg_enable_bg) {
-		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
-		phba->cfg_sg_dma_buf_size +=
-			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
-	}
-
-	/* Also reinitialize the host templates with new values. */
-	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-
 	lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
+	lpfc_enable_fip_init(phba, lpfc_enable_fip);
+	lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+
 	return;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f2619..d2a922997c0 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -23,6 +23,8 @@ typedef int (*node_filter)(struct lpfc_nodelist *, void *);
 struct fc_rport;
 void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
 void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
 void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
@@ -35,17 +37,19 @@ int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
-		   LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+		 LPFC_MBOXQ_t *, uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
 void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
 void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
 
 struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
 void lpfc_cleanup_rpis(struct lpfc_vport *, int);
 int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
 void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
@@ -54,6 +58,7 @@ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -105,6 +110,7 @@ int lpfc_issue_els_adisc(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_logo(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
 int lpfc_issue_els_npiv_logo(struct lpfc_vport *, struct lpfc_nodelist *);
 int lpfc_issue_els_scr(struct lpfc_vport *, uint32_t, uint8_t);
+int lpfc_issue_fabric_reglogin(struct lpfc_vport *);
 int lpfc_els_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_ct_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
 int lpfc_els_rsp_acc(struct lpfc_vport *, uint32_t, struct lpfc_iocbq *,
@@ -149,15 +155,19 @@ int lpfc_online(struct lpfc_hba *);
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
 void lpfc_offline_prep(struct lpfc_hba *);
 void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
 
 int lpfc_sli_setup(struct lpfc_hba *);
 int lpfc_sli_queue_setup(struct lpfc_hba *);
 
 void lpfc_handle_eratt(struct lpfc_hba *);
 void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
 
 void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +175,32 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
 int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
 
 void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
 	uint32_t , LPFC_MBOXQ_t *);
 struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
 void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+			uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
 
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
 void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
 void lpfc_stop_vport_timers(struct lpfc_vport *);
 
 void lpfc_poll_timeout(unsigned long ptr);
@@ -186,6 +212,7 @@ void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
 void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
 			   uint32_t);
+void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
 void lpfc_reset_barrier(struct lpfc_hba * phba);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
@@ -198,12 +225,13 @@ int lpfc_sli_host_down(struct lpfc_vport *);
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
 int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
 void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +265,7 @@ struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *,
 
 int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
 			     struct lpfc_iocbq *, struct lpfc_iocbq *,
 			     uint32_t);
 void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +282,12 @@ void lpfc_in_buf_free(struct lpfc_hba *, struct lpfc_dmabuf *);
 const char* lpfc_info(struct Scsi_Host *);
 int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
 
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
 void lpfc_get_cfgparam(struct lpfc_hba *);
 void lpfc_get_vport_cfgparam(struct lpfc_vport *);
 int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +348,15 @@ lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *,
 				struct lpfc_iocbq *);
 struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
 void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
 
 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
 #define HBA_EVENT_RSCN                   5
 #define HBA_EVENT_LINK_UP                2
 #define HBA_EVENT_LINK_DOWN              3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 896c7b0351e..1dbccfd3d02 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -32,8 +32,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -267,8 +269,6 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
 	     uint32_t tmo, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli  *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	IOCB_t *icmd;
 	struct lpfc_iocbq *geniocb;
 	int rc;
@@ -331,7 +331,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
 	geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
 	geniocb->vport = vport;
 	geniocb->retry = retry;
-	rc = lpfc_sli_issue_iocb(phba, pring, geniocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, geniocb);
@@ -1578,6 +1578,9 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
 				case LA_8GHZ_LINK:
 					ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
 				break;
+				case LA_10GHZ_LINK:
+					ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+				break;
 				default:
 					ae->un.PortSpeed =
 						HBA_PORTSPEED_UNKNOWN;
@@ -1730,7 +1733,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 	uint8_t *fwname;
 
 	if (vp->rev.rBit) {
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			rev = vp->rev.sli2FwRev;
 		else
 			rev = vp->rev.sli1FwRev;
@@ -1756,7 +1759,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 		}
 		b4 = (rev & 0x0000000f);
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			fwname = vp->rev.sli2FwName;
 		else
 			fwname = vp->rev.sli1FwName;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 52be5644e07..2b02b1fb39a 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2007-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -33,8 +33,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -280,6 +282,8 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size)
 	struct lpfc_dmabuf *d_buf;
 	struct hbq_dmabuf *hbq_buf;
 
+	if (phba->sli_rev != 3)
+		return 0;
 	cnt = LPFC_HBQINFO_SIZE;
 	spin_lock_irq(&phba->hbalock);
 
@@ -489,12 +493,15 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
 				 pring->next_cmdidx, pring->local_getidx,
 				 pring->flag, pgpp->rspPutInx, pring->numRiocb);
 	}
-	word0 = readl(phba->HAregaddr);
-	word1 = readl(phba->CAregaddr);
-	word2 = readl(phba->HSregaddr);
-	word3 = readl(phba->HCregaddr);
-	len +=  snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x HC:%08x\n",
-	word0, word1, word2, word3);
+
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		word0 = readl(phba->HAregaddr);
+		word1 = readl(phba->CAregaddr);
+		word2 = readl(phba->HSregaddr);
+		word3 = readl(phba->HCregaddr);
+		len +=  snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
+				 "HC:%08x\n", word0, word1, word2, word3);
+	}
 	spin_unlock_irq(&phba->hbalock);
 	return len;
 }
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index ffd10897207..1142070e948 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -135,6 +135,7 @@ struct lpfc_nodelist {
 #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */
 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
 #define NLP_SC_REQ         0x20000000	/* Target requires authentication */
+#define NLP_RPI_VALID      0x80000000	/* nlp_rpi is valid */
 
 /* ndlp usage management macros */
 #define NLP_CHK_NODE_ACT(ndlp)		(((ndlp)->nlp_usg_map \
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b8b34cf5c3d..6bdeb14878a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -84,7 +86,8 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
 	uint32_t ha_copy;
 
 	if (vport->port_state >= LPFC_VPORT_READY ||
-	    phba->link_state == LPFC_LINK_DOWN)
+	    phba->link_state == LPFC_LINK_DOWN ||
+	    phba->sli_rev > LPFC_SLI_REV3)
 		return 0;
 
 	/* Read the HBA Host Attention Register */
@@ -219,7 +222,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
 		icmd->un.elsreq64.myID = vport->fc_myDID;
 
 		/* For ELS_REQUEST64_CR, use the VPI by default */
-		icmd->ulpContext = vport->vpi;
+		icmd->ulpContext = vport->vpi + phba->vpi_base;
 		icmd->ulpCt_h = 0;
 		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
 		if (elscmd == ELS_CMD_ECHO)
@@ -305,7 +308,7 @@ els_iocb_free_pcmb_exit:
  *   0 - successfully issued fabric registration login for @vport
  *   -ENXIO -- failed to issue fabric registration login for @vport
  **/
-static int
+int
 lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
 {
 	struct lpfc_hba  *phba = vport->phba;
@@ -345,8 +348,7 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
 		err = 4;
 		goto fail;
 	}
-	rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
-			    0);
+	rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
 	if (rc) {
 		err = 5;
 		goto fail_free_mbox;
@@ -386,6 +388,75 @@ fail:
 }
 
 /**
+ * lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
+ * the @vport. This mailbox command is necessary for FCoE only.
+ *
+ * Return code
+ *   0 - successfully issued REG_VFI for @vport
+ *   A failure code otherwise.
+ **/
+static int
+lpfc_issue_reg_vfi(struct lpfc_vport *vport)
+{
+	struct lpfc_hba  *phba = vport->phba;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_nodelist *ndlp;
+	struct serv_parm *sp;
+	struct lpfc_dmabuf *dmabuf;
+	int rc = 0;
+
+	sp = &phba->fc_fabparam;
+	ndlp = lpfc_findnode_did(vport, Fabric_DID);
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+		rc = -ENODEV;
+		goto fail;
+	}
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+	dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+	if (!dmabuf->virt) {
+		rc = -ENOMEM;
+		goto fail_free_dmabuf;
+	}
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		rc = -ENOMEM;
+		goto fail_free_coherent;
+	}
+	vport->port_state = LPFC_FABRIC_CFG_LINK;
+	memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
+	lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
+	mboxq->vport = vport;
+	mboxq->context1 = dmabuf;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		rc = -ENXIO;
+		goto fail_free_mbox;
+	}
+	return 0;
+
+fail_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+fail_free_coherent:
+	lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+fail_free_dmabuf:
+	kfree(dmabuf);
+fail:
+	lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+		"0289 Issue Register VFI failed: Err %d\n", rc);
+	return rc;
+}
+
+/**
  * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -497,17 +568,24 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		}
 	}
 
-	lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
-
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
-	    vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) {
-		lpfc_register_new_vport(phba, vport, ndlp);
-		return 0;
+	if (phba->sli_rev < LPFC_SLI_REV4) {
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
+		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
+		    vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+			lpfc_register_new_vport(phba, vport, ndlp);
+		else
+			lpfc_issue_fabric_reglogin(vport);
+	} else {
+		ndlp->nlp_type |= NLP_FABRIC;
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+		if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+			lpfc_start_fdiscs(phba);
+			lpfc_do_scr_ns_plogi(phba, vport);
+		} else
+			lpfc_issue_reg_vfi(vport);
 	}
-	lpfc_issue_fabric_reglogin(vport);
 	return 0;
 }
-
 /**
  * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
  * @vport: pointer to a host virtual N_Port data structure.
@@ -815,9 +893,14 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (sp->cmn.fcphHigh < FC_PH3)
 		sp->cmn.fcphHigh = FC_PH3;
 
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+	if  (phba->sli_rev == LPFC_SLI_REV4) {
+		elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+		elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+		/* FLOGI needs to be 3 for WQE FCFI */
+		/* Set the fcfi to the fcfi we registered with */
+		elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+	} else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 		sp->cmn.request_multiple_Nport = 1;
-
 		/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
 		icmd->ulpCt_h = 1;
 		icmd->ulpCt_l = 0;
@@ -930,6 +1013,8 @@ lpfc_initial_flogi(struct lpfc_vport *vport)
 		if (!ndlp)
 			return 0;
 		lpfc_nlp_init(vport, ndlp, Fabric_DID);
+		/* Set the node type */
+		ndlp->nlp_type |= NLP_FABRIC;
 		/* Put ndlp onto node list */
 		lpfc_enqueue_node(vport, ndlp);
 	} else if (!NLP_CHK_NODE_ACT(ndlp)) {
@@ -1350,14 +1435,12 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 	IOCB_t *icmd;
 	struct lpfc_nodelist *ndlp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int ret;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	ndlp = lpfc_findnode_did(vport, did);
 	if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
@@ -1391,7 +1474,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 
 	phba->fc_stat.elsXmitPLOGI++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
-	ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (ret == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -1501,14 +1584,9 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	PRLI *npr;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 
-	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
-
 	cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
 	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_PRLI);
@@ -1550,7 +1628,8 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_PRLI_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_PRLI_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -1608,7 +1687,8 @@ lpfc_adisc_done(struct lpfc_vport *vport)
 	 * and continue discovery.
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
@@ -1788,8 +1868,6 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	ADISC *ap;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 
@@ -1822,7 +1900,8 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_ADISC_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_ADISC_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -1937,15 +2016,10 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];
-
 	spin_lock_irq(shost->host_lock);
 	if (ndlp->nlp_flag & NLP_LOGO_SND) {
 		spin_unlock_irq(shost->host_lock);
@@ -1978,7 +2052,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(shost->host_lock);
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
@@ -2058,14 +2132,12 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	struct lpfc_nodelist *ndlp;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	cmdsize = (sizeof(uint32_t) + sizeof(SCR));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2108,7 +2180,8 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 
 	phba->fc_stat.elsXmitSCR++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
 		 * lpfc_els_free_iocb routine to trigger the rlease of
 		 * the node.
@@ -2152,7 +2225,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	FARP *fp;
 	uint8_t *pcmd;
@@ -2162,7 +2234,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_nodelist *ndlp;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	cmdsize = (sizeof(uint32_t) + sizeof(FARP));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2219,7 +2290,8 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 
 	phba->fc_stat.elsXmitFARPR++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		/* The additional lpfc_nlp_put will cause the following
 		 * lpfc_els_free_iocb routine to trigger the release of
 		 * the node.
@@ -2949,6 +3021,14 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 
+	/*
+	 * This routine is used to register and unregister in previous SLI
+	 * modes.
+	 */
+	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+	    (phba->sli_rev == LPFC_SLI_REV4))
+		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
 	pmb->context1 = NULL;
 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
 	kfree(mp);
@@ -2961,6 +3041,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		 */
 		lpfc_nlp_not_used(ndlp);
 	}
+
 	return;
 }
 
@@ -3170,7 +3251,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -3178,7 +3258,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	ELS_PKT *els_pkt_ptr;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 	oldcmd = &oldiocb->iocb;
 
 	switch (flag) {
@@ -3266,7 +3345,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	}
 
 	phba->fc_stat.elsXmitACC++;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3305,15 +3384,12 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
-
 	cmdsize = 2 * sizeof(uint32_t);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -3346,7 +3422,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 
 	phba->fc_stat.elsXmitLSRJT++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -3379,8 +3455,6 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 		       struct lpfc_nodelist *ndlp)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli  *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	ADISC *ap;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
@@ -3422,7 +3496,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3459,14 +3533,12 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	cmdsize = sizeof(uint32_t) + sizeof(PRLI);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -3520,7 +3592,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3562,15 +3634,12 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 	RNID *rn;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
 	psli = &phba->sli;
-	pring = &psli->ring[LPFC_ELS_RING];
-
 	cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
 					+ (2 * sizeof(struct lpfc_name));
 	if (format)
@@ -3626,7 +3695,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 	elsiocb->context1 = NULL;  /* Don't need ndlp for cmpl,
 				    * it could be freed */
 
-	rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
 	if (rc == IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
@@ -3839,7 +3908,9 @@ lpfc_rscn_payload_check(struct lpfc_vport *vport, uint32_t did)
 			payload_len -= sizeof(uint32_t);
 			switch (rscn_did.un.b.resv & RSCN_ADDRESS_FORMAT_MASK) {
 			case RSCN_ADDRESS_FORMAT_PORT:
-				if (ns_did.un.word == rscn_did.un.word)
+				if ((ns_did.un.b.domain == rscn_did.un.b.domain)
+				    && (ns_did.un.b.area == rscn_did.un.b.area)
+				    && (ns_did.un.b.id == rscn_did.un.b.id))
 					goto return_did_out;
 				break;
 			case RSCN_ADDRESS_FORMAT_AREA:
@@ -4300,7 +4371,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 			lpfc_init_link(phba, mbox,
 				       phba->cfg_topology,
 				       phba->cfg_link_speed);
-			mbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+			mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
 			mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 			mbox->vport = vport;
 			rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
@@ -4440,8 +4511,6 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 static void
 lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	MAILBOX_t *mb;
 	IOCB_t *icmd;
 	RPS_RSP *rps_rsp;
@@ -4451,7 +4520,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	uint16_t xri, status;
 	uint32_t cmdsize;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	xri = (uint16_t) ((unsigned long)(pmb->context1));
@@ -4507,7 +4576,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 			 ndlp->nlp_rpi);
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
 		lpfc_els_free_iocb(phba, elsiocb);
 	return;
 }
@@ -4616,8 +4685,6 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
 	IOCB_t *icmd, *oldcmd;
 	RPL_RSP rpl_rsp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	uint8_t *pcmd;
 
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -4654,7 +4721,8 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
 			 ndlp->nlp_rpi);
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		lpfc_els_free_iocb(phba, elsiocb);
 		return 1;
 	}
@@ -4883,7 +4951,10 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		} else {
 			/* FAN verified - skip FLOGI */
 			vport->fc_myDID = vport->fc_prevDID;
-			lpfc_issue_fabric_reglogin(vport);
+			if (phba->sli_rev < LPFC_SLI_REV4)
+				lpfc_issue_fabric_reglogin(vport);
+			else
+				lpfc_issue_reg_vfi(vport);
 		}
 	}
 	return 0;
@@ -5566,11 +5637,10 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 
 dropit:
 	if (vport && !(vport->load_flag & FC_UNLOADING))
-		lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
-			"(%d):0111 Dropping received ELS cmd "
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+			"0111 Dropping received ELS cmd "
 			"Data: x%x x%x x%x\n",
-			vport->vpi, icmd->ulpStatus,
-			icmd->un.ulpWord[4], icmd->ulpTimeout);
+			icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout);
 	phba->fc_stat.elsRcvDrop++;
 }
 
@@ -5646,10 +5716,9 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	     icmd->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
 		if (icmd->unsli3.rcvsli3.vpi == 0xffff)
 			vport = phba->pport;
-		else {
-			uint16_t vpi = icmd->unsli3.rcvsli3.vpi;
-			vport = lpfc_find_vport_by_vpid(phba, vpi);
-		}
+		else
+			vport = lpfc_find_vport_by_vpid(phba,
+				icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
 	}
 	/* If there are no BDEs associated
 	 * with this IOCB, there is nothing to do.
@@ -5781,7 +5850,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	spin_lock_irq(shost->host_lock);
 	vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
@@ -5818,7 +5887,10 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	} else {
 		if (vport == phba->pport)
-			lpfc_issue_fabric_reglogin(vport);
+			if (phba->sli_rev < LPFC_SLI_REV4)
+				lpfc_issue_fabric_reglogin(vport);
+			else
+				lpfc_issue_reg_vfi(vport);
 		else
 			lpfc_do_scr_ns_plogi(phba, vport);
 	}
@@ -5850,7 +5922,7 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport,
 
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (mbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, mbox);
+		lpfc_reg_vpi(vport, mbox);
 		mbox->vport = vport;
 		mbox->context2 = lpfc_nlp_get(ndlp);
 		mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport;
@@ -6139,7 +6211,6 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
@@ -6169,7 +6240,8 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(shost->host_lock);
-	if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+	    IOCB_ERROR) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_LOGO_SND;
 		spin_unlock_irq(shost->host_lock);
@@ -6224,7 +6296,6 @@ lpfc_resume_fabric_iocbs(struct lpfc_hba *phba)
 	struct lpfc_iocbq *iocb;
 	unsigned long iflags;
 	int ret;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	IOCB_t *cmd;
 
 repeat:
@@ -6248,7 +6319,7 @@ repeat:
 			"Fabric sched1:   ste:x%x",
 			iocb->vport->port_state, 0, 0);
 
-		ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
 			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6394,7 +6465,6 @@ static int
 lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
 {
 	unsigned long iflags;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 	int ready;
 	int ret;
 
@@ -6418,7 +6488,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
 			"Fabric sched2:   ste:x%x",
 			iocb->vport->port_state, 0, 0);
 
-		ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
 			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6524,3 +6594,38 @@ void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
 	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
 			      IOERR_SLI_ABORTED);
 }
+
+/**
+ * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the els xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 slow-path
+ * ELS aborted xri.
+ **/
+void
+lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+			&phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+		if (sglq_entry->sli4_xritag == xri) {
+			list_del(&sglq_entry->list);
+			spin_unlock_irqrestore(
+					&phba->sli4_hba.abts_sgl_list_lock,
+					 iflag);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+
+			list_add_tail(&sglq_entry->list,
+				&phba->sli4_hba.lpfc_sgl_list);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e764ce0bf70..35c41ae75be 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -29,10 +29,12 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_scsi.h"
 #include "lpfc.h"
 #include "lpfc_logmsg.h"
@@ -273,6 +275,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
 	    !(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
 	    (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))
 		lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
+
+	lpfc_unregister_unused_fcf(phba);
 }
 
 /**
@@ -295,10 +299,11 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
 
 	ret = kzalloc(sizeof(struct lpfc_fast_path_event),
 			GFP_ATOMIC);
-	if (ret)
+	if (ret) {
 		atomic_inc(&phba->fast_event_count);
-	INIT_LIST_HEAD(&ret->work_evt.evt_listp);
-	ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+		INIT_LIST_HEAD(&ret->work_evt.evt_listp);
+		ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+	}
 	return ret;
 }
 
@@ -491,6 +496,10 @@ lpfc_work_done(struct lpfc_hba *phba)
 	phba->work_ha = 0;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* First, try to post the next mailbox command to SLI4 device */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+		lpfc_sli4_post_async_mbox(phba);
+
 	if (ha_copy & HA_ERATT)
 		/* Handle the error attention event */
 		lpfc_handle_eratt(phba);
@@ -501,9 +510,27 @@ lpfc_work_done(struct lpfc_hba *phba)
 	if (ha_copy & HA_LATT)
 		lpfc_handle_latt(phba);
 
+	/* Process SLI4 events */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+		if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+			lpfc_sli4_fcp_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+			lpfc_sli4_els_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ASYNC_EVENT)
+			lpfc_sli4_async_event_proc(phba);
+		if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+		}
+		if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+			lpfc_sli4_handle_received_buffer(phba);
+	}
+
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi; i++) {
+		for (i = 0; i <= phba->max_vports; i++) {
 			/*
 			 * We could have no vports in array if unloading, so if
 			 * this happens then just use the pport
@@ -555,23 +582,24 @@ lpfc_work_done(struct lpfc_hba *phba)
 		/*
 		 * Turn on Ring interrupts
 		 */
-		spin_lock_irq(&phba->hbalock);
-		control = readl(phba->HCregaddr);
-		if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
-			lpfc_debugfs_slow_ring_trc(phba,
-				"WRK Enable ring: cntl:x%x hacopy:x%x",
-				control, ha_copy, 0);
-
-			control |= (HC_R0INT_ENA << LPFC_ELS_RING);
-			writel(control, phba->HCregaddr);
-			readl(phba->HCregaddr); /* flush */
-		}
-		else {
-			lpfc_debugfs_slow_ring_trc(phba,
-				"WRK Ring ok:     cntl:x%x hacopy:x%x",
-				control, ha_copy, 0);
+		if (phba->sli_rev <= LPFC_SLI_REV3) {
+			spin_lock_irq(&phba->hbalock);
+			control = readl(phba->HCregaddr);
+			if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
+				lpfc_debugfs_slow_ring_trc(phba,
+					"WRK Enable ring: cntl:x%x hacopy:x%x",
+					control, ha_copy, 0);
+
+				control |= (HC_R0INT_ENA << LPFC_ELS_RING);
+				writel(control, phba->HCregaddr);
+				readl(phba->HCregaddr); /* flush */
+			} else {
+				lpfc_debugfs_slow_ring_trc(phba,
+					"WRK Ring ok:     cntl:x%x hacopy:x%x",
+					control, ha_copy, 0);
+			}
+			spin_unlock_irq(&phba->hbalock);
 		}
-		spin_unlock_irq(&phba->hbalock);
 	}
 	lpfc_work_list_done(phba);
 }
@@ -689,7 +717,7 @@ lpfc_port_link_failure(struct lpfc_vport *vport)
 	lpfc_can_disctmo(vport);
 }
 
-static void
+void
 lpfc_linkdown_port(struct lpfc_vport *vport)
 {
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
@@ -716,6 +744,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
 	if (phba->link_state == LPFC_LINK_DOWN)
 		return 0;
 	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
 	if (phba->link_state > LPFC_LINK_DOWN) {
 		phba->link_state = LPFC_LINK_DOWN;
 		phba->pport->fc_flag &= ~FC_LBIT;
@@ -723,7 +752,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			/* Issue a LINK DOWN event to all nodes */
 			lpfc_linkdown_port(vports[i]);
 		}
@@ -833,10 +862,11 @@ lpfc_linkup(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_linkup_port(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+	    (phba->sli_rev < LPFC_SLI_REV4))
 		lpfc_issue_clear_la(phba, phba->pport);
 
 	return 0;
@@ -854,7 +884,7 @@ lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_sli   *psli = &phba->sli;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t control;
 
 	/* Since we don't do discovery right now, turn these off here */
@@ -917,7 +947,7 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
 
-	if (pmb->mb.mbxStatus)
+	if (pmb->u.mb.mbxStatus)
 		goto out;
 
 	mempool_free(pmb, phba->mbox_mem_pool);
@@ -945,7 +975,7 @@ out:
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
 			 "0306 CONFIG_LINK mbxStatus error x%x "
 			 "HBA state x%x\n",
-			 pmb->mb.mbxStatus, vport->port_state);
+			 pmb->u.mb.mbxStatus, vport->port_state);
 	mempool_free(pmb, phba->mbox_mem_pool);
 
 	lpfc_linkdown(phba);
@@ -959,9 +989,592 @@ out:
 }
 
 static void
+lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+	unsigned long flags;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+			 "2017 REG_FCFI mbxStatus error x%x "
+			 "HBA state x%x\n",
+			 mboxq->u.mb.mbxStatus, vport->port_state);
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* Start FCoE discovery by sending a FLOGI. */
+	phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
+	/* Set the FCFI registered flag */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	phba->fcf.fcf_flag |= FCF_REGISTERED;
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	if (vport->port_state != LPFC_FLOGI) {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		lpfc_initial_flogi(vport);
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_fab_name_match - Check if the fcf fabric name match.
+ * @fab_name: pointer to fabric name.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's fabric name with provided
+ * fabric name. If the fabric name are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
+{
+	if ((fab_name[0] ==
+		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) &&
+	    (fab_name[1] ==
+		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) &&
+	    (fab_name[2] ==
+		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) &&
+	    (fab_name[3] ==
+		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) &&
+	    (fab_name[4] ==
+		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) &&
+	    (fab_name[5] ==
+		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) &&
+	    (fab_name[6] ==
+		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) &&
+	    (fab_name[7] ==
+		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_mac_addr_match - Check if the fcf mac address match.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's mac address with HBA's
+ * FCF mac address. If the mac addresses are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_mac_addr_match(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+	if ((phba->fcf.mac_addr[0] ==
+		bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[1] ==
+		bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[2] ==
+		bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[3] ==
+		bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[4] ==
+		bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) &&
+	    (phba->fcf.mac_addr[5] ==
+		bf_get(lpfc_fcf_record_mac_5, new_fcf_record)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine copies the FCF information from the FCF
+ * record to lpfc_hba data structure.
+ **/
+static void
+lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+	phba->fcf.fabric_name[0] =
+		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
+	phba->fcf.fabric_name[1] =
+		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
+	phba->fcf.fabric_name[2] =
+		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
+	phba->fcf.fabric_name[3] =
+		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
+	phba->fcf.fabric_name[4] =
+		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
+	phba->fcf.fabric_name[5] =
+		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
+	phba->fcf.fabric_name[6] =
+		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
+	phba->fcf.fabric_name[7] =
+		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
+	phba->fcf.mac_addr[0] =
+		bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
+	phba->fcf.mac_addr[1] =
+		bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
+	phba->fcf.mac_addr[2] =
+		bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
+	phba->fcf.mac_addr[3] =
+		bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
+	phba->fcf.mac_addr[4] =
+		bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
+	phba->fcf.mac_addr[5] =
+		bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
+	phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+	phba->fcf.priority = new_fcf_record->fip_priority;
+}
+
+/**
+ * lpfc_register_fcf - Register the FCF with hba.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issues a register fcfi mailbox command to register
+ * the fcf with HBA.
+ **/
+static void
+lpfc_register_fcf(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *fcf_mbxq;
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+
+	/* If the FCF is not availabe do nothing. */
+	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		return;
+	}
+
+	/* The FCF is already registered, start discovery */
+	if (phba->fcf.fcf_flag & FCF_REGISTERED) {
+		phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		if (phba->pport->port_state != LPFC_FLOGI)
+			lpfc_initial_flogi(phba->pport);
+		return;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	fcf_mbxq = mempool_alloc(phba->mbox_mem_pool,
+		GFP_KERNEL);
+	if (!fcf_mbxq)
+		return;
+
+	lpfc_reg_fcfi(phba, fcf_mbxq);
+	fcf_mbxq->vport = phba->pport;
+	fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
+	rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		mempool_free(fcf_mbxq, phba->mbox_mem_pool);
+
+	return;
+}
+
+/**
+ * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ * @boot_flag: Indicates if this record used by boot bios.
+ * @addr_mode: The address mode to be used by this FCF
+ *
+ * This routine compare the fcf record with connect list obtained from the
+ * config region to decide if this FCF can be used for SAN discovery. It returns
+ * 1 if this record can be used for SAN discovery else return zero. If this FCF
+ * record can be used for SAN discovery, the boot_flag will indicate if this FCF
+ * is used by boot bios and addr_mode will indicate the addressing mode to be
+ * used for this FCF when the function returns.
+ * If the FCF record need to be used with a particular vlan id, the vlan is
+ * set in the vlan_id on return of the function. If not VLAN tagging need to
+ * be used with the FCF vlan_id will be set to 0xFFFF;
+ **/
+static int
+lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
+			struct fcf_record *new_fcf_record,
+			uint32_t *boot_flag, uint32_t *addr_mode,
+			uint16_t *vlan_id)
+{
+	struct lpfc_fcf_conn_entry *conn_entry;
+
+	if (!phba->cfg_enable_fip) {
+		*boot_flag = 0;
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record);
+		if (phba->valid_vlan)
+			*vlan_id = phba->vlan_id;
+		else
+			*vlan_id = 0xFFFF;
+		return 1;
+	}
+
+	/*
+	 * If there are no FCF connection table entry, driver connect to all
+	 * FCFs.
+	 */
+	if (list_empty(&phba->fcf_conn_rec_list)) {
+		*boot_flag = 0;
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+			new_fcf_record);
+		*vlan_id = 0xFFFF;
+		return 1;
+	}
+
+	list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, list) {
+		if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
+			continue;
+
+		if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
+			!lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
+				new_fcf_record))
+			continue;
+
+		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
+			/*
+			 * If the vlan bit map does not have the bit set for the
+			 * vlan id to be used, then it is not a match.
+			 */
+			if (!(new_fcf_record->vlan_bitmap
+				[conn_entry->conn_rec.vlan_tag / 8] &
+				(1 << (conn_entry->conn_rec.vlan_tag % 8))))
+				continue;
+		}
+
+		/*
+		 * Check if the connection record specifies a required
+		 * addressing mode.
+		 */
+		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
+
+			/*
+			 * If SPMA required but FCF not support this continue.
+			 */
+			if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+				!(bf_get(lpfc_fcf_record_mac_addr_prov,
+					new_fcf_record) & LPFC_FCF_SPMA))
+				continue;
+
+			/*
+			 * If FPMA required but FCF not support this continue.
+			 */
+			if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+				!(bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record) & LPFC_FCF_FPMA))
+				continue;
+		}
+
+		/*
+		 * This fcf record matches filtering criteria.
+		 */
+		if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
+			*boot_flag = 1;
+		else
+			*boot_flag = 0;
+
+		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+				new_fcf_record);
+		/*
+		 * If the user specified a required address mode, assign that
+		 * address mode
+		 */
+		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
+			*addr_mode = (conn_entry->conn_rec.flags &
+				FCFCNCT_AM_SPMA) ?
+				LPFC_FCF_SPMA : LPFC_FCF_FPMA;
+		/*
+		 * If the user specified a prefered address mode, use the
+		 * addr mode only if FCF support the addr_mode.
+		 */
+		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+			(*addr_mode & LPFC_FCF_SPMA))
+				*addr_mode = LPFC_FCF_SPMA;
+		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+			!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+			(*addr_mode & LPFC_FCF_FPMA))
+				*addr_mode = LPFC_FCF_FPMA;
+		/*
+		 * If user did not specify any addressing mode, use FPMA if
+		 * possible else use SPMA.
+		 */
+		else if (*addr_mode & LPFC_FCF_FPMA)
+			*addr_mode = LPFC_FCF_FPMA;
+
+		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
+			*vlan_id = conn_entry->conn_rec.vlan_tag;
+		else
+			*vlan_id = 0xFFFF;
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This function iterate through all the fcf records available in
+ * HBA and choose the optimal FCF record for discovery. After finding
+ * the FCF for discovery it register the FCF record and kick start
+ * discovery.
+ * If FCF_IN_USE flag is set in currently used FCF, the routine try to
+ * use a FCF record which match fabric name and mac address of the
+ * currently used FCF record.
+ * If the driver support only one FCF, it will try to use the FCF record
+ * used by BOOT_BIOS.
+ */
+void
+lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	struct fcf_record *new_fcf_record;
+	int rc;
+	uint32_t boot_flag, addr_mode;
+	uint32_t next_fcf_index;
+	unsigned long flags;
+	uint16_t vlan_id;
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2524 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		goto out;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+
+	shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &shdr->response);
+	/*
+	 * The FCF Record was read and there is no reason for the driver
+	 * to maintain the FCF record data or memory. Instead, just need
+	 * to book keeping the FCFIs can be used.
+	 */
+	if (shdr_status || shdr_add_status) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2521 READ_FCF_RECORD mailbox failed "
+				"with status x%x add_status x%x, mbx\n",
+				shdr_status, shdr_add_status);
+		goto out;
+	}
+	/* Interpreting the returned information of FCF records */
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+	lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
+			      sizeof(struct lpfc_mbx_read_fcf_tbl));
+	next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
+
+	new_fcf_record = (struct fcf_record *)(virt_addr +
+			  sizeof(struct lpfc_mbx_read_fcf_tbl));
+	lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
+			      sizeof(struct fcf_record));
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+
+	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record,
+				      &boot_flag, &addr_mode,
+					&vlan_id);
+	/*
+	 * If the fcf record does not match with connect list entries
+	 * read the next entry.
+	 */
+	if (!rc)
+		goto read_next_fcf;
+	/*
+	 * If this is not the first FCF discovery of the HBA, use last
+	 * FCF record for the discovery.
+	 */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	if (phba->fcf.fcf_flag & FCF_IN_USE) {
+		if (lpfc_fab_name_match(phba->fcf.fabric_name,
+			new_fcf_record) &&
+		    lpfc_mac_addr_match(phba, new_fcf_record)) {
+			phba->fcf.fcf_flag |= FCF_AVAILABLE;
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto out;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto read_next_fcf;
+	}
+	if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
+		/*
+		 * If the current FCF record does not have boot flag
+		 * set and new fcf record has boot flag set, use the
+		 * new fcf record.
+		 */
+		if (boot_flag && !(phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+			/* Use this FCF record */
+			lpfc_copy_fcf_record(phba, new_fcf_record);
+			phba->fcf.addr_mode = addr_mode;
+			phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+			if (vlan_id != 0xFFFF) {
+				phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+				phba->fcf.vlan_id = vlan_id;
+			}
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		/*
+		 * If the current FCF record has boot flag set and the
+		 * new FCF record does not have boot flag, read the next
+		 * FCF record.
+		 */
+		if (!boot_flag && (phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		/*
+		 * If there is a record with lower priority value for
+		 * the current FCF, use that record.
+		 */
+		if (lpfc_fab_name_match(phba->fcf.fabric_name, new_fcf_record)
+			&& (new_fcf_record->fip_priority <
+				phba->fcf.priority)) {
+			/* Use this FCF record */
+			lpfc_copy_fcf_record(phba, new_fcf_record);
+			phba->fcf.addr_mode = addr_mode;
+			if (vlan_id != 0xFFFF) {
+				phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+				phba->fcf.vlan_id = vlan_id;
+			}
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			goto read_next_fcf;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+		goto read_next_fcf;
+	}
+	/*
+	 * This is the first available FCF record, use this
+	 * record.
+	 */
+	lpfc_copy_fcf_record(phba, new_fcf_record);
+	phba->fcf.addr_mode = addr_mode;
+	if (boot_flag)
+		phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+	phba->fcf.fcf_flag |= FCF_AVAILABLE;
+	if (vlan_id != 0xFFFF) {
+		phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+		phba->fcf.vlan_id = vlan_id;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	goto read_next_fcf;
+
+read_next_fcf:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0)
+		lpfc_register_fcf(phba);
+	else
+		lpfc_sli4_read_fcf_record(phba, next_fcf_index);
+	return;
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	lpfc_register_fcf(phba);
+
+	return;
+}
+
+/**
+ * lpfc_start_fdiscs - send fdiscs for each vports on this port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function loops through the list of vports on the @phba and issues an
+ * FDISC if possible.
+ */
+void
+lpfc_start_fdiscs(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
+				continue;
+			/* There are no vpi for this vport */
+			if (vports[i]->vpi > phba->max_vpi) {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_FAILED);
+				continue;
+			}
+			if (phba->fc_topology == TOPOLOGY_LOOP) {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_LINKDOWN);
+				continue;
+			}
+			if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
+				lpfc_initial_fdisc(vports[i]);
+			else {
+				lpfc_vport_set_state(vports[i],
+						     FC_VPORT_NO_FABRIC_SUPP);
+				lpfc_printf_vlog(vports[i], KERN_ERR,
+						 LOG_ELS,
+						 "0259 No NPIV "
+						 "Fabric support\n");
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+}
+
+void
+lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *dmabuf = mboxq->context1;
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+			 "2018 REG_VFI mbxStatus error x%x "
+			 "HBA state x%x\n",
+			 mboxq->u.mb.mbxStatus, vport->port_state);
+		if (phba->fc_topology == TOPOLOGY_LOOP) {
+			/* FLOGI failed, use loop map to make discovery list */
+			lpfc_disc_list_loopmap(vport);
+			/* Start discovery */
+			lpfc_disc_start(vport);
+			goto fail_free_mem;
+		}
+		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+		goto fail_free_mem;
+	}
+	/* Mark the vport has registered with its VFI */
+	vport->vfi_state |= LPFC_VFI_REGISTERED;
+
+	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
+		lpfc_start_fdiscs(phba);
+		lpfc_do_scr_ns_plogi(phba, vport);
+	}
+
+fail_free_mem:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return;
+}
+
+static void
 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
 	struct lpfc_vport  *vport = pmb->vport;
 
@@ -1012,13 +1625,13 @@ static void
 lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 {
 	struct lpfc_vport *vport = phba->pport;
-	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox;
+	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
 	int i;
 	struct lpfc_dmabuf *mp;
 	int rc;
+	struct fcf_record *fcf_record;
 
 	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-	cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 
 	spin_lock_irq(&phba->hbalock);
 	switch (la->UlnkSpeed) {
@@ -1034,6 +1647,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 	case LA_8GHZ_LINK:
 		phba->fc_linkspeed = LA_8GHZ_LINK;
 		break;
+	case LA_10GHZ_LINK:
+		phba->fc_linkspeed = LA_10GHZ_LINK;
+		break;
 	default:
 		phba->fc_linkspeed = LA_UNKNW_LINK;
 		break;
@@ -1115,22 +1731,66 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
 			kfree(mp);
 			mempool_free(sparam_mbox, phba->mbox_mem_pool);
-			if (cfglink_mbox)
-				mempool_free(cfglink_mbox, phba->mbox_mem_pool);
 			goto out;
 		}
 	}
 
-	if (cfglink_mbox) {
+	if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+		if (!cfglink_mbox)
+			goto out;
 		vport->port_state = LPFC_LOCAL_CFG_LINK;
 		lpfc_config_link(phba, cfglink_mbox);
 		cfglink_mbox->vport = vport;
 		cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
 		rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
-		if (rc != MBX_NOT_FINISHED)
-			return;
-		mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+		if (rc == MBX_NOT_FINISHED) {
+			mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+			goto out;
+		}
+	} else {
+		/*
+		 * Add the driver's default FCF record at FCF index 0 now. This
+		 * is phase 1 implementation that support FCF index 0 and driver
+		 * defaults.
+		 */
+		if (phba->cfg_enable_fip == 0) {
+			fcf_record = kzalloc(sizeof(struct fcf_record),
+					GFP_KERNEL);
+			if (unlikely(!fcf_record)) {
+				lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_SLI,
+					"2554 Could not allocate memmory for "
+					"fcf record\n");
+				rc = -ENODEV;
+				goto out;
+			}
+
+			lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
+						LPFC_FCOE_FCF_DEF_INDEX);
+			rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
+			if (unlikely(rc)) {
+				lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_SLI,
+					"2013 Could not manually add FCF "
+					"record 0, status %d\n", rc);
+				rc = -ENODEV;
+				kfree(fcf_record);
+				goto out;
+			}
+			kfree(fcf_record);
+		}
+		/*
+		 * The driver is expected to do FIP/FCF. Call the port
+		 * and get the FCF Table.
+		 */
+		rc = lpfc_sli4_read_fcf_record(phba,
+					LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			goto out;
 	}
+
+	return;
 out:
 	lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
@@ -1147,10 +1807,12 @@ lpfc_enable_la(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag |= LPFC_PROCESS_LA;
-	control = readl(phba->HCregaddr);
-	control |= HC_LAINT_ENA;
-	writel(control, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		control = readl(phba->HCregaddr);
+		control |= HC_LAINT_ENA;
+		writel(control, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -1159,6 +1821,7 @@ lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
 {
 	lpfc_linkdown(phba);
 	lpfc_enable_la(phba);
+	lpfc_unregister_unused_fcf(phba);
 	/* turn on Link Attention interrupts - no CLEAR_LA needed */
 }
 
@@ -1175,7 +1838,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	READ_LA_VAR *la;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 
 	/* Unblock ELS traffic */
@@ -1190,7 +1853,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		goto lpfc_mbx_cmpl_read_la_free_mbuf;
 	}
 
-	la = (READ_LA_VAR *) & pmb->mb.un.varReadLA;
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
 
 	memcpy(&phba->alpa_map[0], mp->virt, 128);
 
@@ -1328,7 +1991,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 static void
 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
@@ -1381,7 +2044,7 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	switch (mb->mbxStatus) {
 	case 0x0011:
@@ -1416,6 +2079,128 @@ out:
 	return;
 }
 
+/**
+ * lpfc_create_static_vport - Read HBA config region to create static vports.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issue a DUMP mailbox command for config region 22 to get
+ * the list of static vports to be created. The function create vports
+ * based on the information returned from the HBA.
+ **/
+void
+lpfc_create_static_vport(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb = NULL;
+	MAILBOX_t *mb;
+	struct static_vport_info *vport_info;
+	int rc, i;
+	struct fc_vport_identifiers vport_id;
+	struct fc_vport *new_fc_vport;
+	struct Scsi_Host *shost;
+	struct lpfc_vport *vport;
+	uint16_t offset = 0;
+	uint8_t *vport_buff;
+
+	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0542 lpfc_create_static_vport failed to"
+				" allocate mailbox memory\n");
+		return;
+	}
+
+	mb = &pmb->u.mb;
+
+	vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
+	if (!vport_info) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0543 lpfc_create_static_vport failed to"
+				" allocate vport_info\n");
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return;
+	}
+
+	vport_buff = (uint8_t *) vport_info;
+	do {
+		lpfc_dump_static_vport(phba, pmb, offset);
+		pmb->vport = phba->pport;
+		rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO);
+
+		if ((rc != MBX_SUCCESS) || mb->mbxStatus) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0544 lpfc_create_static_vport failed to"
+				" issue dump mailbox command ret 0x%x "
+				"status 0x%x\n",
+				rc, mb->mbxStatus);
+			goto out;
+		}
+
+		if (mb->un.varDmp.word_cnt >
+			sizeof(struct static_vport_info) - offset)
+			mb->un.varDmp.word_cnt =
+			sizeof(struct static_vport_info) - offset;
+
+		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+			vport_buff + offset,
+			mb->un.varDmp.word_cnt);
+		offset += mb->un.varDmp.word_cnt;
+
+	} while (mb->un.varDmp.word_cnt &&
+		offset < sizeof(struct static_vport_info));
+
+
+	if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
+		((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
+			!= VPORT_INFO_REV)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0545 lpfc_create_static_vport bad"
+			" information header 0x%x 0x%x\n",
+			le32_to_cpu(vport_info->signature),
+			le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
+
+		goto out;
+	}
+
+	shost = lpfc_shost_from_vport(phba->pport);
+
+	for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
+		memset(&vport_id, 0, sizeof(vport_id));
+		vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
+		vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
+		if (!vport_id.port_name || !vport_id.node_name)
+			continue;
+
+		vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
+		vport_id.vport_type = FC_PORTTYPE_NPIV;
+		vport_id.disable = false;
+		new_fc_vport = fc_vport_create(shost, 0, &vport_id);
+
+		if (!new_fc_vport) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0546 lpfc_create_static_vport failed to"
+				" create vport \n");
+			continue;
+		}
+
+		vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
+		vport->vport_flag |= STATIC_VPORT;
+	}
+
+out:
+	/*
+	 * If this is timed out command, setting NULL to context2 tell SLI
+	 * layer not to use this buffer.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	pmb->context2 = NULL;
+	spin_unlock_irq(&phba->hbalock);
+	kfree(vport_info);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(pmb, phba->mbox_mem_pool);
+
+	return;
+}
+
 /*
  * This routine handles processing a Fabric REG_LOGIN mailbox
  * command upon completion. It is setup in the LPFC_MBOXQ
@@ -1426,16 +2211,17 @@ void
 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp;
-	struct lpfc_vport **vports;
-	int i;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	pmb->context1 = NULL;
 	pmb->context2 = NULL;
 	if (mb->mbxStatus) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+				 "0258 Register Fabric login error: 0x%x\n",
+				 mb->mbxStatus);
 		lpfc_mbuf_free(phba, mp->virt, mp->phys);
 		kfree(mp);
 		mempool_free(pmb, phba->mbox_mem_pool);
@@ -1454,9 +2240,6 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		}
 
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
-				 "0258 Register Fabric login error: 0x%x\n",
-				 mb->mbxStatus);
 		/* Decrement the reference count to ndlp after the reference
 		 * to the ndlp are done.
 		 */
@@ -1465,34 +2248,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
-		vports = lpfc_create_vport_work_array(phba);
-		if (vports != NULL)
-			for(i = 0;
-			    i <= phba->max_vpi && vports[i] != NULL;
-			    i++) {
-				if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
-					continue;
-				if (phba->fc_topology == TOPOLOGY_LOOP) {
-					lpfc_vport_set_state(vports[i],
-							FC_VPORT_LINKDOWN);
-					continue;
-				}
-				if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
-					lpfc_initial_fdisc(vports[i]);
-				else {
-					lpfc_vport_set_state(vports[i],
-						FC_VPORT_NO_FABRIC_SUPP);
-					lpfc_printf_vlog(vport, KERN_ERR,
-							 LOG_ELS,
-							"0259 No NPIV "
-							"Fabric support\n");
-				}
-			}
-		lpfc_destroy_vport_work_array(phba, vports);
+		lpfc_start_fdiscs(phba);
 		lpfc_do_scr_ns_plogi(phba, vport);
 	}
 
@@ -1516,13 +2277,16 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 void
 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 	struct lpfc_vport *vport = pmb->vport;
 
 	if (mb->mbxStatus) {
 out:
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "0260 Register NameServer error: 0x%x\n",
+				 mb->mbxStatus);
 		/* decrement the node reference count held for this
 		 * callback function.
 		 */
@@ -1546,15 +2310,13 @@ out:
 			return;
 		}
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				 "0260 Register NameServer error: 0x%x\n",
-				 mb->mbxStatus);
 		return;
 	}
 
 	pmb->context1 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -2055,7 +2817,7 @@ lpfc_check_sli_ndlp(struct lpfc_hba *phba,
 	if (pring->ringno == LPFC_ELS_RING) {
 		switch (icmd->ulpCommand) {
 		case CMD_GEN_REQUEST64_CR:
-			if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
+			if (iocb->context_un.ndlp == ndlp)
 				return 1;
 		case CMD_ELS_REQUEST64_CR:
 			if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
@@ -2102,7 +2864,7 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	 */
 	psli = &phba->sli;
 	rpi = ndlp->nlp_rpi;
-	if (rpi) {
+	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		/* Now process each ring */
 		for (i = 0; i < psli->num_rings; i++) {
 			pring = &psli->ring[i];
@@ -2150,7 +2912,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	LPFC_MBOXQ_t    *mbox;
 	int rc;
 
-	if (ndlp->nlp_rpi) {
+	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (mbox) {
 			lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
@@ -2162,6 +2924,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		}
 		lpfc_no_rpi(phba, ndlp);
 		ndlp->nlp_rpi = 0;
+		ndlp->nlp_flag &= ~NLP_RPI_VALID;
 		return 1;
 	}
 	return 0;
@@ -2252,7 +3015,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
 	if ((mb = phba->sli.mbox_active)) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mb->context2 = NULL;
 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -2261,7 +3024,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		    (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
@@ -2309,13 +3072,14 @@ lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	int rc;
 
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
-	if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) {
+	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
+	    !(ndlp->nlp_flag & NLP_RPI_VALID)) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */
 		if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
 			!= NULL) {
-			rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID,
+			rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
 			    (uint8_t *) &vport->fc_sparam, mbox, 0);
 			if (rc) {
 				mempool_free(mbox, phba->mbox_mem_pool);
@@ -2553,7 +3317,8 @@ lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	 * clear_la then don't send it.
 	 */
 	if ((phba->link_state >= LPFC_CLEAR_LA) ||
-	    (vport->port_type != LPFC_PHYSICAL_PORT))
+	    (vport->port_type != LPFC_PHYSICAL_PORT) ||
+		(phba->sli_rev == LPFC_SLI_REV4))
 		return;
 
 			/* Link up discovery */
@@ -2582,7 +3347,7 @@ lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 
 	regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (regvpimbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+		lpfc_reg_vpi(vport, regvpimbox);
 		regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
 		regvpimbox->vport = vport;
 		if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2642,7 +3407,8 @@ lpfc_disc_start(struct lpfc_vport *vport)
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
 	    !(vport->fc_flag & FC_PT2PT) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}
@@ -2919,11 +3685,13 @@ restart_disc:
 		 * set port_state to PORT_READY if SLI2.
 		 * cmpl_reg_vpi will set port_state to READY for SLI3.
 		 */
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
-			lpfc_issue_reg_vpi(phba, vport);
-		else  {	/* NPIV Not enabled */
-			lpfc_issue_clear_la(phba, vport);
-			vport->port_state = LPFC_VPORT_READY;
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+				lpfc_issue_reg_vpi(phba, vport);
+			else  {	/* NPIV Not enabled */
+				lpfc_issue_clear_la(phba, vport);
+				vport->port_state = LPFC_VPORT_READY;
+			}
 		}
 
 		/* Setup and issue mailbox INITIALIZE LINK command */
@@ -2939,7 +3707,7 @@ restart_disc:
 		lpfc_linkdown(phba);
 		lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
 			       phba->cfg_link_speed);
-		initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+		initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
 		initlinkmbox->vport = vport;
 		initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
@@ -2959,11 +3727,13 @@ restart_disc:
 		 * set port_state to PORT_READY if SLI2.
 		 * cmpl_reg_vpi will set port_state to READY for SLI3.
 		 */
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
-			lpfc_issue_reg_vpi(phba, vport);
-		else {	/* NPIV Not enabled */
-			lpfc_issue_clear_la(phba, vport);
-			vport->port_state = LPFC_VPORT_READY;
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+				lpfc_issue_reg_vpi(phba, vport);
+			else  {	/* NPIV Not enabled */
+				lpfc_issue_clear_la(phba, vport);
+				vport->port_state = LPFC_VPORT_READY;
+			}
 		}
 		break;
 
@@ -3036,7 +3806,7 @@ restart_disc:
 void
 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf   *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 	struct lpfc_vport    *vport = pmb->vport;
@@ -3044,6 +3814,7 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	pmb->context1 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -3297,3 +4068,395 @@ lpfc_nlp_not_used(struct lpfc_nodelist *ndlp)
 			return 1;
 	return 0;
 }
+
+/**
+ * lpfc_fcf_inuse - Check if FCF can be unregistered.
+ * @phba: Pointer to hba context object.
+ *
+ * This function iterate through all FC nodes associated
+ * will all vports to check if there is any node with
+ * fc_rports associated with it. If there is an fc_rport
+ * associated with the node, then the node is either in
+ * discovered state or its devloss_timer is pending.
+ */
+static int
+lpfc_fcf_inuse(struct lpfc_hba *phba)
+{
+	struct lpfc_vport **vports;
+	int i, ret = 0;
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host  *shost;
+
+	vports = lpfc_create_vport_work_array(phba);
+
+	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+		shost = lpfc_shost_from_vport(vports[i]);
+		spin_lock_irq(shost->host_lock);
+		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
+			if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
+			  (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
+				ret = 1;
+				spin_unlock_irq(shost->host_lock);
+				goto out;
+			}
+		}
+		spin_unlock_irq(shost->host_lock);
+	}
+out:
+	lpfc_destroy_vport_work_array(phba, vports);
+	return ret;
+}
+
+/**
+ * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2555 UNREG_VFI mbxStatus error x%x "
+			"HBA state x%x\n",
+			mboxq->u.mb.mbxStatus, vport->port_state);
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2550 UNREG_FCFI mbxStatus error x%x "
+			"HBA state x%x\n",
+			mboxq->u.mb.mbxStatus, vport->port_state);
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
+ * @phba: Pointer to hba context object.
+ *
+ * This function check if there are any connected remote port for the FCF and
+ * if all the devices are disconnected, this function unregister FCFI.
+ * This function also tries to use another FCF for discovery.
+ */
+void
+lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	struct lpfc_vport **vports;
+	int i;
+
+	spin_lock_irq(&phba->hbalock);
+	/*
+	 * If HBA is not running in FIP mode or
+	 * If HBA does not support FCoE or
+	 * If FCF is not registered.
+	 * do nothing.
+	 */
+	if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+		!(phba->fcf.fcf_flag & FCF_REGISTERED) ||
+		(phba->cfg_enable_fip == 0)) {
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	if (lpfc_fcf_inuse(phba))
+		return;
+
+
+	/* Unregister VPIs */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports &&
+		(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			lpfc_mbx_unreg_vpi(vports[i]);
+			vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+		}
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Unregister VFI */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2556 UNREG_VFI mbox allocation failed"
+			"HBA state x%x\n",
+			phba->pport->port_state);
+		return;
+	}
+
+	lpfc_unreg_vfi(mbox, phba->pport->vfi);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2557 UNREG_VFI issue mbox failed rc x%x "
+			"HBA state x%x\n",
+			rc, phba->pport->port_state);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* Unregister FCF */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2551 UNREG_FCFI mbox allocation failed"
+			"HBA state x%x\n",
+			phba->pport->port_state);
+		return;
+	}
+
+	lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2552 UNREG_FCFI issue mbox failed rc x%x "
+			"HBA state x%x\n",
+			rc, phba->pport->port_state);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_REGISTERED |
+		FCF_DISCOVERED | FCF_BOOT_ENABLE | FCF_IN_USE |
+		FCF_VALID_VLAN);
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * If driver is not unloading, check if there is any other
+	 * FCF record that can be used for discovery.
+	 */
+	if ((phba->pport->load_flag & FC_UNLOADING) ||
+		(phba->link_state < LPFC_LINK_UP))
+		return;
+
+	rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+
+	if (rc)
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+			"2553 lpfc_unregister_unused_fcf failed to read FCF"
+			" record HBA state x%x\n",
+			phba->pport->port_state);
+}
+
+/**
+ * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCF connection table as in the config
+ *         region.
+ * This function create driver data structure for the FCF connection
+ * record table read from config region 23.
+ */
+static void
+lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
+	uint8_t *buff)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+	struct lpfc_fcf_conn_hdr *conn_hdr;
+	struct lpfc_fcf_conn_rec *conn_rec;
+	uint32_t record_count;
+	int i;
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
+	record_count = conn_hdr->length * sizeof(uint32_t)/
+		sizeof(struct lpfc_fcf_conn_rec);
+
+	conn_rec = (struct lpfc_fcf_conn_rec *)
+		(buff + sizeof(struct lpfc_fcf_conn_hdr));
+
+	for (i = 0; i < record_count; i++) {
+		if (!(conn_rec[i].flags & FCFCNCT_VALID))
+			continue;
+		conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
+			GFP_KERNEL);
+		if (!conn_entry) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2566 Failed to allocate connection"
+				" table entry\n");
+			return;
+		}
+
+		memcpy(&conn_entry->conn_rec, &conn_rec[i],
+			sizeof(struct lpfc_fcf_conn_rec));
+		conn_entry->conn_rec.vlan_tag =
+			le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF;
+		conn_entry->conn_rec.flags =
+			le16_to_cpu(conn_entry->conn_rec.flags);
+		list_add_tail(&conn_entry->list,
+			&phba->fcf_conn_rec_list);
+	}
+}
+
+/**
+ * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCoE parameter data structure.
+ *
+ *  This function update driver data structure with config
+ *  parameters read from config region 23.
+ */
+static void
+lpfc_read_fcoe_param(struct lpfc_hba *phba,
+			uint8_t *buff)
+{
+	struct lpfc_fip_param_hdr *fcoe_param_hdr;
+	struct lpfc_fcoe_params *fcoe_param;
+
+	fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
+		buff;
+	fcoe_param = (struct lpfc_fcoe_params *)
+		buff + sizeof(struct lpfc_fip_param_hdr);
+
+	if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
+		(fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
+		return;
+
+	if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+			FIPP_MODE_ON)
+		phba->cfg_enable_fip = 1;
+
+	if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+		FIPP_MODE_OFF)
+		phba->cfg_enable_fip = 0;
+
+	if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
+		phba->valid_vlan = 1;
+		phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
+			0xFFF;
+	}
+
+	phba->fc_map[0] = fcoe_param->fc_map[0];
+	phba->fc_map[1] = fcoe_param->fc_map[1];
+	phba->fc_map[2] = fcoe_param->fc_map[2];
+	return;
+}
+
+/**
+ * lpfc_get_rec_conf23 - Get a record type in config region data.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ * @rec_type: Record type to be searched.
+ *
+ * This function searches config region data to find the begining
+ * of the record specified by record_type. If record found, this
+ * function return pointer to the record else return NULL.
+ */
+static uint8_t *
+lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
+{
+	uint32_t offset = 0, rec_length;
+
+	if ((buff[0] == LPFC_REGION23_LAST_REC) ||
+		(size < sizeof(uint32_t)))
+		return NULL;
+
+	rec_length = buff[offset + 1];
+
+	/*
+	 * One TLV record has one word header and number of data words
+	 * specified in the rec_length field of the record header.
+	 */
+	while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
+		<= size) {
+		if (buff[offset] == rec_type)
+			return &buff[offset];
+
+		if (buff[offset] == LPFC_REGION23_LAST_REC)
+			return NULL;
+
+		offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
+		rec_length = buff[offset + 1];
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
+ * @phba: Pointer to lpfc_hba data structure.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ *
+ * This fuction parse the FCoE config parameters in config region 23 and
+ * populate driver data structure with the parameters.
+ */
+void
+lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
+		uint8_t *buff,
+		uint32_t size)
+{
+	uint32_t offset = 0, rec_length;
+	uint8_t *rec_ptr;
+
+	/*
+	 * If data size is less than 2 words signature and version cannot be
+	 * verified.
+	 */
+	if (size < 2*sizeof(uint32_t))
+		return;
+
+	/* Check the region signature first */
+	if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2567 Config region 23 has bad signature\n");
+		return;
+	}
+
+	offset += 4;
+
+	/* Check the data structure version */
+	if (buff[offset] != LPFC_REGION23_VERSION) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2568 Config region 23 has bad version\n");
+		return;
+	}
+	offset += 4;
+
+	rec_length = buff[offset + 1];
+
+	/* Read FCoE param record */
+	rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+			size - offset, FCOE_PARAM_TYPE);
+	if (rec_ptr)
+		lpfc_read_fcoe_param(phba, rec_ptr);
+
+	/* Read FCF connection table */
+	rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+		size - offset, FCOE_CONN_TBL_TYPE);
+	if (rec_ptr)
+		lpfc_read_fcf_conn_tbl(phba, rec_ptr);
+
+}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b498b..02aa016b93e 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -471,6 +471,35 @@ struct serv_parm {	/* Structure is in Big Endian format */
 };
 
 /*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+	 uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT		24
+#define fc_vft_hdr_r_ctl_MASK		0xFF
+#define fc_vft_hdr_r_ctl_WORD		word0
+#define fc_vft_hdr_ver_SHIFT		22
+#define fc_vft_hdr_ver_MASK		0x3
+#define fc_vft_hdr_ver_WORD		word0
+#define fc_vft_hdr_type_SHIFT		18
+#define fc_vft_hdr_type_MASK		0xF
+#define fc_vft_hdr_type_WORD		word0
+#define fc_vft_hdr_e_SHIFT		16
+#define fc_vft_hdr_e_MASK		0x1
+#define fc_vft_hdr_e_WORD		word0
+#define fc_vft_hdr_priority_SHIFT	13
+#define fc_vft_hdr_priority_MASK	0x7
+#define fc_vft_hdr_priority_WORD	word0
+#define fc_vft_hdr_vf_id_SHIFT		1
+#define fc_vft_hdr_vf_id_MASK		0xFFF
+#define fc_vft_hdr_vf_id_WORD		word0
+	uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT		24
+#define fc_vft_hdr_hopct_MASK		0xFF
+#define fc_vft_hdr_hopct_WORD		word1
+};
+
+/*
  *  Extended Link Service LS_COMMAND codes (Payload Word 0)
  */
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@ typedef struct {
 #define PCI_DEVICE_ID_HORNET        0xfe05
 #define PCI_DEVICE_ID_ZEPHYR_SCSP   0xfe11
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE  0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK    0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
@@ -1342,15 +1374,21 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_READ_LA64       0x95
 #define MBX_REG_VPI	    0x96
 #define MBX_UNREG_VPI	    0x97
-#define MBX_REG_VNPID	    0x96
-#define MBX_UNREG_VNPID	    0x97
 
 #define MBX_WRITE_WWN       0x98
 #define MBX_SET_DEBUG       0x99
 #define MBX_LOAD_EXP_ROM    0x9C
-
-#define MBX_MAX_CMDS        0x9D
+#define MBX_SLI4_CONFIG	    0x9B
+#define MBX_SLI4_REQ_FTRS   0x9D
+#define MBX_MAX_CMDS        0x9E
+#define MBX_RESUME_RPI      0x9E
 #define MBX_SLI2_CMD_MASK   0x80
+#define MBX_REG_VFI         0x9F
+#define MBX_REG_FCFI        0xA0
+#define MBX_UNREG_VFI       0xA1
+#define MBX_UNREG_FCFI	    0xA2
+#define MBX_INIT_VFI        0xA3
+#define MBX_INIT_VPI        0xA4
 
 /* IOCB Commands */
 
@@ -1440,6 +1478,16 @@ typedef struct {		/* FireFly BIU registers */
 #define CMD_IOCB_LOGENTRY_CN		0x94
 #define CMD_IOCB_LOGENTRY_ASYNC_CN	0x96
 
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 		0xD8
+#define DSSCMD_IWRITE64_CX		0xD9
+#define DSSCMD_IREAD64_CR		0xDA
+#define DSSCMD_IREAD64_CX		0xDB
+#define DSSCMD_INVALIDATE_DEK		0xDC
+#define DSSCMD_SET_KEK			0xDD
+#define DSSCMD_GET_KEK_ID		0xDE
+#define DSSCMD_GEN_XFER			0xDF
+
 #define CMD_MAX_IOCB_CMD        0xE6
 #define CMD_IOCB_MASK           0xff
 
@@ -1466,6 +1514,7 @@ typedef struct {		/* FireFly BIU registers */
 #define MBXERR_BAD_RCV_LENGTH       14
 #define MBXERR_DMA_ERROR            15
 #define MBXERR_ERROR                16
+#define MBXERR_LINK_DOWN            0x33
 #define MBX_NOT_FINISHED           255
 
 #define MBX_BUSY                   0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@ struct ulp_bde {
 #endif
 };
 
-struct ulp_bde64 {	/* SLI-2 */
-	union ULP_BDE_TUS {
-		uint32_t w;
-		struct {
-#ifdef __BIG_ENDIAN_BITFIELD
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
-		} f;
-	} tus;
-	uint32_t addrLow;
-	uint32_t addrHigh;
-};
-
 typedef struct ULP_BDL {	/* SLI-2 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t bdeFlags:8;	/* BDL Flags */
@@ -2287,7 +2310,7 @@ typedef struct {
 	uint32_t rsvd3;
 	uint32_t rsvd4;
 	uint32_t rsvd5;
-	uint16_t rsvd6;
+	uint16_t vfi;
 	uint16_t vpi;
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t rsvd1;
@@ -2297,7 +2320,7 @@ typedef struct {
 	uint32_t rsvd4;
 	uint32_t rsvd5;
 	uint16_t vpi;
-	uint16_t rsvd6;
+	uint16_t vfi;
 #endif
 } REG_VPI_VAR;
 
@@ -2457,7 +2480,7 @@ typedef struct {
 	uint32_t entry_index:16;
 #endif
 
-	uint32_t rsvd1;
+	uint32_t sli4_length;
 	uint32_t word_cnt;
 	uint32_t resp_offset;
 } DUMP_VAR;
@@ -2470,9 +2493,32 @@ typedef struct {
 #define  DMP_RSP_OFFSET          0x14   /* word 5 contains first word of rsp */
 #define  DMP_RSP_SIZE            0x6C   /* maximum of 27 words of rsp data */
 
+#define  DMP_REGION_VPORT	 0x16   /* VPort info region */
+#define  DMP_VPORT_REGION_SIZE	 0x200
+#define  DMP_MBOX_OFFSET_WORD	 0x5
+
+#define  DMP_REGION_FCOEPARAM	 0x17   /* fcoe param region */
+#define  DMP_FCOEPARAM_RGN_SIZE	 0x400
+
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
 
+struct vport_rec {
+	uint8_t wwpn[8];
+	uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+	uint32_t 		signature;
+	uint32_t		rev;
+	struct vport_rec 	vport_list[MAX_STATIC_VPORT_COUNT];
+	uint32_t		resvd[66];
+};
+
 /* Option rom version structure */
 struct prog_id {
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@ typedef struct {
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t cmv       :  1;  /* Configure Max VPIs                   */
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
@@ -2717,10 +2765,14 @@ typedef struct {
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
 	uint32_t cmv	   :  1;  /* Configure Max VPIs                   */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
@@ -2740,7 +2792,9 @@ typedef struct {
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@ typedef struct {
 
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 #else	/*  __LITTLE_ENDIAN */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
 #endif
 
-	uint32_t rsvd4;           /* Reserved                             */
+	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 #endif
 
 } CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@ lpfc_error_lost_link(IOCB_t *iocbp)
 #define MENLO_TIMEOUT 30
 #define SETVAR_MLOMNT 0x103107
 #define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 00000000000..39c34b3ad29
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ *	struct temp {
+ *		uint32_t	field1;
+ *		uint32_t	field2;
+ *		uint32_t	field3;
+ *		uint32_t	field4;
+ *	#define example_bit_field_SHIFT		7
+ *	#define example_bit_field_MASK		0x03
+ *	#define example_bit_field_WORD		field4
+ *		uint32_t	field5;
+ *	};
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ *	struct temp t1;
+ *	value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ *	bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ *	bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+	(((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+	((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+		 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+	uint32_t addr_lo;
+	uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0		1
+#define LPFC_SLI4_BAR1		2
+#define LPFC_SLI4_BAR2		4
+
+#define LPFC_SLI4_MBX_EMBED	true
+#define LPFC_SLI4_MBX_NEMBED	false
+
+#define LPFC_SLI4_MB_WORD_COUNT		64
+#define LPFC_MAX_MQ_PAGE		8
+#define LPFC_MAX_WQ_PAGE		8
+#define LPFC_MAX_CQ_PAGE		4
+#define LPFC_MAX_EQ_PAGE		8
+
+#define LPFC_VIR_FUNC_MAX       32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX        5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE	0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE	16
+#define LPFC_ALIGN_64_BYTE	64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET	256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE	0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI	0x2
+#define LPFC_BMBX_BIT1_ADDR_LO	0
+#define LPFC_RPI_HDR_COUNT	64
+#define LPFC_HDR_TEMPLATE_SIZE	4096
+#define LPFC_RPI_ALLOC_ERROR 	0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT	132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX	 0
+
+/* Virtual function numbers */
+#define LPFC_VF0		0
+#define LPFC_VF1		1
+#define LPFC_VF2		2
+#define LPFC_VF3		3
+#define LPFC_VF4		4
+#define LPFC_VF5		5
+#define LPFC_VF6		6
+#define LPFC_VF7		7
+#define LPFC_VF8		8
+#define LPFC_VF9		9
+#define LPFC_VF10		10
+#define LPFC_VF11		11
+#define LPFC_VF12		12
+#define LPFC_VF13		13
+#define LPFC_VF14		14
+#define LPFC_VF15		15
+#define LPFC_VF16		16
+#define LPFC_VF17		17
+#define LPFC_VF18		18
+#define LPFC_VF19		19
+#define LPFC_VF20		20
+#define LPFC_VF21		21
+#define LPFC_VF22		22
+#define LPFC_VF23		23
+#define LPFC_VF24		24
+#define LPFC_VF25		25
+#define LPFC_VF26		26
+#define LPFC_VF27		27
+#define LPFC_VF28		28
+#define LPFC_VF29		29
+#define LPFC_VF30		30
+#define LPFC_VF31		31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0		0
+#define LPFC_PCI_FUNC1		1
+#define LPFC_PCI_FUNC2		2
+#define LPFC_PCI_FUNC3		3
+#define LPFC_PCI_FUNC4		4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT	4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST       651042
+#define LPFC_MIM_IMAX          636
+#define LPFC_FP_DEF_IMAX       10000
+#define LPFC_SP_DEF_IMAX       10000
+
+struct ulp_bde64 {
+	union ULP_BDE_TUS {
+		uint32_t w;
+		struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+#else	/*  __LITTLE_ENDIAN_BITFIELD */
+			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
+			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
+						   VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
+		} f;
+	} tus;
+	uint32_t addrLow;
+	uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+	uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+	uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT	16
+#define lpfc_eqe_resource_id_MASK	0x000000FF
+#define lpfc_eqe_resource_id_WORD	word0
+#define lpfc_eqe_minor_code_SHIFT	4
+#define lpfc_eqe_minor_code_MASK	0x00000FFF
+#define lpfc_eqe_minor_code_WORD	word0
+#define lpfc_eqe_major_code_SHIFT	1
+#define lpfc_eqe_major_code_MASK	0x00000007
+#define lpfc_eqe_major_code_WORD	word0
+#define lpfc_eqe_valid_SHIFT		0
+#define lpfc_eqe_valid_MASK		0x00000001
+#define lpfc_eqe_valid_WORD		word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t word3;
+#define lpfc_cqe_valid_SHIFT		31
+#define lpfc_cqe_valid_MASK		0x00000001
+#define lpfc_cqe_valid_WORD		word3
+#define lpfc_cqe_code_SHIFT		16
+#define lpfc_cqe_code_MASK		0x000000FF
+#define lpfc_cqe_code_WORD		word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS		0x0
+#define CQE_STATUS_FCP_RSP_FAILURE	0x1
+#define CQE_STATUS_REMOTE_STOP		0x2
+#define CQE_STATUS_LOCAL_REJECT		0x3
+#define CQE_STATUS_NPORT_RJT		0x4
+#define CQE_STATUS_FABRIC_RJT		0x5
+#define CQE_STATUS_NPORT_BSY		0x6
+#define CQE_STATUS_FABRIC_BSY		0x7
+#define CQE_STATUS_INTERMED_RSP		0x8
+#define CQE_STATUS_LS_RJT		0x9
+#define CQE_STATUS_CMD_REJECT		0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK	0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY	0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR		0x0
+#define CQE_HW_STATUS_UNDERRUN		0x1
+#define CQE_HW_STATUS_OVERRUN		0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE		0x1
+#define CQE_CODE_RELEASE_WQE		0x2
+#define CQE_CODE_RECEIVE		0x4
+#define CQE_CODE_XRI_ABORTED		0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+	uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT	16
+#define lpfc_wcqe_c_request_tag_MASK	0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD	word0
+#define lpfc_wcqe_c_status_SHIFT	8
+#define lpfc_wcqe_c_status_MASK		0x000000FF
+#define lpfc_wcqe_c_status_WORD		word0
+#define lpfc_wcqe_c_hw_status_SHIFT	0
+#define lpfc_wcqe_c_hw_status_MASK	0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD	word0
+	uint32_t total_data_placed;
+	uint32_t parameter;
+	uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT		28
+#define lpfc_wcqe_c_xb_MASK		0x00000001
+#define lpfc_wcqe_c_xb_WORD		word3
+#define lpfc_wcqe_c_pv_SHIFT		27
+#define lpfc_wcqe_c_pv_MASK		0x00000001
+#define lpfc_wcqe_c_pv_WORD		word3
+#define lpfc_wcqe_c_priority_SHIFT	24
+#define lpfc_wcqe_c_priority_MASK		0x00000007
+#define lpfc_wcqe_c_priority_WORD		word3
+#define lpfc_wcqe_c_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT		16
+#define lpfc_wcqe_r_wq_id_MASK		0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD		word2
+#define lpfc_wcqe_r_wqe_index_SHIFT	0
+#define lpfc_wcqe_r_wqe_index_MASK	0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD	word2
+	uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD		lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+	uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT		8
+#define lpfc_wcqe_xa_status_MASK		0x000000FF
+#define lpfc_wcqe_xa_status_WORD		word0
+	uint32_t parameter;
+	uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT	16
+#define lpfc_wcqe_xa_remote_xid_MASK	0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD	word2
+#define lpfc_wcqe_xa_xri_SHIFT		0
+#define lpfc_wcqe_xa_xri_MASK		0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD		word2
+	uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT	lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT		30
+#define lpfc_wcqe_xa_ia_MASK		0x00000001
+#define lpfc_wcqe_xa_ia_WORD		word3
+#define CQE_XRI_ABORTED_IA_REMOTE	0
+#define CQE_XRI_ABORTED_IA_LOCAL	1
+#define lpfc_wcqe_xa_br_SHIFT		29
+#define lpfc_wcqe_xa_br_MASK		0x00000001
+#define lpfc_wcqe_xa_br_WORD		word3
+#define CQE_XRI_ABORTED_BR_BA_ACC	0
+#define CQE_XRI_ABORTED_BR_BA_RJT	1
+#define lpfc_wcqe_xa_eo_SHIFT		28
+#define lpfc_wcqe_xa_eo_MASK		0x00000001
+#define lpfc_wcqe_xa_eo_WORD		word3
+#define CQE_XRI_ABORTED_EO_REMOTE	0
+#define CQE_XRI_ABORTED_EO_LOCAL	1
+#define lpfc_wcqe_xa_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD		lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+	uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT		16
+#define lpfc_rcqe_bindex_MASK		0x0000FFF
+#define lpfc_rcqe_bindex_WORD		word0
+#define lpfc_rcqe_status_SHIFT		8
+#define lpfc_rcqe_status_MASK		0x000000FF
+#define lpfc_rcqe_status_WORD		word0
+#define FC_STATUS_RQ_SUCCESS		0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 	0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 	0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 	0x13 /* Frame Discard */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rcqe_length_SHIFT		16
+#define lpfc_rcqe_length_MASK		0x0000FFFF
+#define lpfc_rcqe_length_WORD		word2
+#define lpfc_rcqe_rq_id_SHIFT		6
+#define lpfc_rcqe_rq_id_MASK		0x000003FF
+#define lpfc_rcqe_rq_id_WORD		word2
+#define lpfc_rcqe_fcf_id_SHIFT		0
+#define lpfc_rcqe_fcf_id_MASK		0x0000003F
+#define lpfc_rcqe_fcf_id_WORD		word2
+	uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT		lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK		lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD		lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT		30
+#define lpfc_rcqe_port_MASK		0x00000001
+#define lpfc_rcqe_port_WORD		word3
+#define lpfc_rcqe_hdr_length_SHIFT	24
+#define lpfc_rcqe_hdr_length_MASK	0x0000001F
+#define lpfc_rcqe_hdr_length_WORD	word3
+#define lpfc_rcqe_code_SHIFT		lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK		lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD		lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT		8
+#define lpfc_rcqe_eof_MASK		0x000000FF
+#define lpfc_rcqe_eof_WORD		word3
+#define FCOE_EOFn	0x41
+#define FCOE_EOFt	0x42
+#define FCOE_EOFni	0x49
+#define FCOE_EOFa	0x50
+#define lpfc_rcqe_sof_SHIFT		0
+#define lpfc_rcqe_sof_MASK		0x000000FF
+#define lpfc_rcqe_sof_WORD		word3
+#define FCOE_SOFi2	0x2d
+#define FCOE_SOFi3	0x2e
+#define FCOE_SOFn2	0x35
+#define FCOE_SOFn3	0x36
+};
+
+struct lpfc_wqe_generic{
+	struct ulp_bde64 bde;
+	uint32_t word3;
+	uint32_t word4;
+	uint32_t word5;
+	uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT	16
+#define lpfc_wqe_gen_context_MASK	0x0000FFFF
+#define lpfc_wqe_gen_context_WORD	word6
+#define lpfc_wqe_gen_xri_SHIFT		0
+#define lpfc_wqe_gen_xri_MASK		0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD		word6
+	uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT		23
+#define lpfc_wqe_gen_lnk_MASK		0x00000001
+#define lpfc_wqe_gen_lnk_WORD		word7
+#define lpfc_wqe_gen_erp_SHIFT		22
+#define lpfc_wqe_gen_erp_MASK		0x00000001
+#define lpfc_wqe_gen_erp_WORD		word7
+#define lpfc_wqe_gen_pu_SHIFT		20
+#define lpfc_wqe_gen_pu_MASK		0x00000003
+#define lpfc_wqe_gen_pu_WORD		word7
+#define lpfc_wqe_gen_class_SHIFT	16
+#define lpfc_wqe_gen_class_MASK		0x00000007
+#define lpfc_wqe_gen_class_WORD		word7
+#define lpfc_wqe_gen_command_SHIFT	8
+#define lpfc_wqe_gen_command_MASK	0x000000FF
+#define lpfc_wqe_gen_command_WORD	word7
+#define lpfc_wqe_gen_status_SHIFT	4
+#define lpfc_wqe_gen_status_MASK	0x0000000F
+#define lpfc_wqe_gen_status_WORD	word7
+#define lpfc_wqe_gen_ct_SHIFT		2
+#define lpfc_wqe_gen_ct_MASK		0x00000007
+#define lpfc_wqe_gen_ct_WORD		word7
+	uint32_t abort_tag;
+	uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT	0
+#define lpfc_wqe_gen_request_tag_MASK	0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD	word9
+	uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT		24
+#define lpfc_wqe_gen_ccp_MASK		0x000000FF
+#define lpfc_wqe_gen_ccp_WORD		word10
+#define lpfc_wqe_gen_ccpe_SHIFT		23
+#define lpfc_wqe_gen_ccpe_MASK		0x00000001
+#define lpfc_wqe_gen_ccpe_WORD		word10
+#define lpfc_wqe_gen_pv_SHIFT		19
+#define lpfc_wqe_gen_pv_MASK		0x00000001
+#define lpfc_wqe_gen_pv_WORD		word10
+#define lpfc_wqe_gen_pri_SHIFT		16
+#define lpfc_wqe_gen_pri_MASK		0x00000007
+#define lpfc_wqe_gen_pri_WORD		word10
+	uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT	16
+#define lpfc_wqe_gen_cq_id_MASK		0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD		word11
+#define LPFC_WQE_CQ_ID_DEFAULT	0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT		7
+#define lpfc_wqe_gen_wqec_MASK		0x00000001
+#define lpfc_wqe_gen_wqec_WORD		word11
+#define lpfc_wqe_gen_cmd_type_SHIFT	0
+#define lpfc_wqe_gen_cmd_type_MASK	0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD	word11
+	uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+	uint32_t address_hi;
+	uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+	uint32_t word2;
+#define lpfc_bde4_last_SHIFT		31
+#define lpfc_bde4_last_MASK		0x00000001
+#define lpfc_bde4_last_WORD		word2
+#define lpfc_bde4_sge_offset_SHIFT	0
+#define lpfc_bde4_sge_offset_MASK	0x000003FF
+#define lpfc_bde4_sge_offset_WORD	word2
+	uint32_t word3;
+#define lpfc_bde4_length_SHIFT		0
+#define lpfc_bde4_length_MASK		0x000000FF
+#define lpfc_bde4_length_WORD		word3
+};
+
+struct lpfc_register {
+	uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI		0x00A4
+#define LPFC_UERR_STATUS_LO		0x00A0
+#define LPFC_ONLINE0			0x00B0
+#define LPFC_ONLINE1			0x00B4
+#define LPFC_SCRATCHPAD			0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE			0x00AC
+#define lpfc_hst_state_perr_SHIFT	31
+#define lpfc_hst_state_perr_MASK	0x1
+#define lpfc_hst_state_perr_WORD	word0
+#define lpfc_hst_state_sfi_SHIFT	30
+#define lpfc_hst_state_sfi_MASK		0x1
+#define lpfc_hst_state_sfi_WORD		word0
+#define lpfc_hst_state_nip_SHIFT	29
+#define lpfc_hst_state_nip_MASK		0x1
+#define lpfc_hst_state_nip_WORD		word0
+#define lpfc_hst_state_ipc_SHIFT	28
+#define lpfc_hst_state_ipc_MASK		0x1
+#define lpfc_hst_state_ipc_WORD		word0
+#define lpfc_hst_state_xrom_SHIFT	27
+#define lpfc_hst_state_xrom_MASK	0x1
+#define lpfc_hst_state_xrom_WORD	word0
+#define lpfc_hst_state_dl_SHIFT		26
+#define lpfc_hst_state_dl_MASK		0x1
+#define lpfc_hst_state_dl_WORD		word0
+#define lpfc_hst_state_port_status_SHIFT	0
+#define lpfc_hst_state_port_status_MASK		0xFFFF
+#define lpfc_hst_state_port_status_WORD		word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET			0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY		0x0001
+#define LPFC_POST_STAGE_HOST_RDY			0x0002
+#define LPFC_POST_STAGE_BE_RESET			0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START		0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE			0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START		0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE			0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START		0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE		0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START			0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE			0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START		0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE		0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START		0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE		0x0701
+#define LPFC_POST_STAGE_ARMFW_START			0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START		0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE			0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START	0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE	0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET			0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK			0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE		0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP			0x0B03
+#define LPFC_POST_STAGE_PARSE_XML			0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE			0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE			0x0B06
+#define LPFC_POST_STAGE_RC_DONE				0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM			0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS			0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY			0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 			0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT			4
+#define lpfc_scratchpad_slirev_MASK			0xF
+#define lpfc_scratchpad_slirev_WORD			word0
+#define lpfc_scratchpad_chiptype_SHIFT			8
+#define lpfc_scratchpad_chiptype_MASK			0xFF
+#define lpfc_scratchpad_chiptype_WORD			word0
+#define lpfc_scratchpad_featurelevel1_SHIFT		16
+#define lpfc_scratchpad_featurelevel1_MASK		0xFF
+#define lpfc_scratchpad_featurelevel1_WORD		word0
+#define lpfc_scratchpad_featurelevel2_SHIFT		24
+#define lpfc_scratchpad_featurelevel2_MASK		0xFF
+#define lpfc_scratchpad_featurelevel2_WORD		word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL	0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL	0xFFFFFFFF
+
+#define LPFC_HST_ISR0		0x0C18
+#define LPFC_HST_ISR1		0x0C1C
+#define LPFC_HST_ISR2		0x0C20
+#define LPFC_HST_ISR3		0x0C24
+#define LPFC_HST_ISR4		0x0C28
+
+#define LPFC_HST_IMR0		0x0C48
+#define LPFC_HST_IMR1		0x0C4C
+#define LPFC_HST_IMR2		0x0C50
+#define LPFC_HST_IMR3		0x0C54
+#define LPFC_HST_IMR4		0x0C58
+
+#define LPFC_HST_ISCR0		0x0C78
+#define LPFC_HST_ISCR1		0x0C7C
+#define LPFC_HST_ISCR2		0x0C80
+#define LPFC_HST_ISCR3		0x0C84
+#define LPFC_HST_ISCR4		0x0C88
+
+#define LPFC_SLI4_INTR0			BIT0
+#define LPFC_SLI4_INTR1			BIT1
+#define LPFC_SLI4_INTR2			BIT2
+#define LPFC_SLI4_INTR3			BIT3
+#define LPFC_SLI4_INTR4			BIT4
+#define LPFC_SLI4_INTR5			BIT5
+#define LPFC_SLI4_INTR6			BIT6
+#define LPFC_SLI4_INTR7			BIT7
+#define LPFC_SLI4_INTR8			BIT8
+#define LPFC_SLI4_INTR9			BIT9
+#define LPFC_SLI4_INTR10		BIT10
+#define LPFC_SLI4_INTR11		BIT11
+#define LPFC_SLI4_INTR12		BIT12
+#define LPFC_SLI4_INTR13		BIT13
+#define LPFC_SLI4_INTR14		BIT14
+#define LPFC_SLI4_INTR15		BIT15
+#define LPFC_SLI4_INTR16		BIT16
+#define LPFC_SLI4_INTR17		BIT17
+#define LPFC_SLI4_INTR18		BIT18
+#define LPFC_SLI4_INTR19		BIT19
+#define LPFC_SLI4_INTR20		BIT20
+#define LPFC_SLI4_INTR21		BIT21
+#define LPFC_SLI4_INTR22		BIT22
+#define LPFC_SLI4_INTR23		BIT23
+#define LPFC_SLI4_INTR24		BIT24
+#define LPFC_SLI4_INTR25		BIT25
+#define LPFC_SLI4_INTR26		BIT26
+#define LPFC_SLI4_INTR27		BIT27
+#define LPFC_SLI4_INTR28		BIT28
+#define LPFC_SLI4_INTR29		BIT29
+#define LPFC_SLI4_INTR30		BIT30
+#define LPFC_SLI4_INTR31		BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL		0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT	16
+#define lpfc_rq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD	word0
+#define LPFC_RQ_POST_BATCH		8	/* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT		0
+#define lpfc_rq_doorbell_id_MASK		0x03FF
+#define lpfc_rq_doorbell_id_WORD		word0
+
+#define LPFC_WQ_DOORBELL		0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT	24
+#define lpfc_wq_doorbell_num_posted_MASK	0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD	word0
+#define lpfc_wq_doorbell_index_SHIFT		16
+#define lpfc_wq_doorbell_index_MASK		0x00FF
+#define lpfc_wq_doorbell_index_WORD		word0
+#define lpfc_wq_doorbell_id_SHIFT		0
+#define lpfc_wq_doorbell_id_MASK		0xFFFF
+#define lpfc_wq_doorbell_id_WORD		word0
+
+#define LPFC_EQCQ_DOORBELL		0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT		29
+#define lpfc_eqcq_doorbell_arm_MASK		0x0001
+#define lpfc_eqcq_doorbell_arm_WORD		word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT	16
+#define lpfc_eqcq_doorbell_num_released_MASK	0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD	word0
+#define lpfc_eqcq_doorbell_qt_SHIFT		10
+#define lpfc_eqcq_doorbell_qt_MASK		0x0001
+#define lpfc_eqcq_doorbell_qt_WORD		word0
+#define LPFC_QUEUE_TYPE_COMPLETION	0
+#define LPFC_QUEUE_TYPE_EVENT		1
+#define lpfc_eqcq_doorbell_eqci_SHIFT		9
+#define lpfc_eqcq_doorbell_eqci_MASK		0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT		0
+#define lpfc_eqcq_doorbell_cqid_MASK		0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT		0
+#define lpfc_eqcq_doorbell_eqid_MASK		0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD		word0
+
+#define LPFC_BMBX			0x0160
+#define lpfc_bmbx_addr_SHIFT		2
+#define lpfc_bmbx_addr_MASK		0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD		word0
+#define lpfc_bmbx_hi_SHIFT		1
+#define lpfc_bmbx_hi_MASK		0x0001
+#define lpfc_bmbx_hi_WORD		word0
+#define lpfc_bmbx_rdy_SHIFT		0
+#define lpfc_bmbx_rdy_MASK		0x0001
+#define lpfc_bmbx_rdy_WORD		word0
+
+#define LPFC_MQ_DOORBELL			0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT	16
+#define lpfc_mq_doorbell_num_posted_MASK	0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD	word0
+#define lpfc_mq_doorbell_id_SHIFT		0
+#define lpfc_mq_doorbell_id_MASK		0x03FF
+#define lpfc_mq_doorbell_id_WORD		word0
+
+struct lpfc_sli4_cfg_mhdr {
+	uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT		0
+#define lpfc_mbox_hdr_emb_MASK		0x00000001
+#define lpfc_mbox_hdr_emb_WORD		word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT	3
+#define lpfc_mbox_hdr_sge_cnt_MASK	0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD	word1
+	uint32_t payload_length;
+	uint32_t tag_lo;
+	uint32_t tag_hi;
+	uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_port_number_SHIFT		16
+#define lpfc_mbox_hdr_port_number_MASK		0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t timeout;
+		uint32_t request_length;
+		uint32_t reserved9;
+	} request;
+	struct {
+		uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT		0
+#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD		word6
+#define lpfc_mbox_hdr_subsystem_SHIFT		8
+#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD		word6
+#define lpfc_mbox_hdr_domain_SHIFT		24
+#define lpfc_mbox_hdr_domain_MASK		0x000000FF
+#define lpfc_mbox_hdr_domain_WORD		word6
+		uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT		0
+#define lpfc_mbox_hdr_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_status_WORD		word7
+#define lpfc_mbox_hdr_add_status_SHIFT		8
+#define lpfc_mbox_hdr_add_status_MASK		0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD		word7
+		uint32_t response_length;
+		uint32_t actual_response_length;
+	} response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON	0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE	0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0   0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1	0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE		0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE		0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE		0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES	0x20
+#define LPFC_MBOX_OPCODE_NOP			0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY		0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY		0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY		0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET		0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE			0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY		0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES		0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES		0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE			0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY		0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE		0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF			0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF		0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE		0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+	uint32_t word0;
+#define lpfc_eq_context_size_SHIFT	31
+#define lpfc_eq_context_size_MASK	0x00000001
+#define lpfc_eq_context_size_WORD	word0
+#define LPFC_EQE_SIZE_4			0x0
+#define LPFC_EQE_SIZE_16		0x1
+#define lpfc_eq_context_valid_SHIFT	29
+#define lpfc_eq_context_valid_MASK	0x00000001
+#define lpfc_eq_context_valid_WORD	word0
+	uint32_t word1;
+#define lpfc_eq_context_count_SHIFT	26
+#define lpfc_eq_context_count_MASK	0x00000003
+#define lpfc_eq_context_count_WORD	word1
+#define LPFC_EQ_CNT_256		0x0
+#define LPFC_EQ_CNT_512		0x1
+#define LPFC_EQ_CNT_1024	0x2
+#define LPFC_EQ_CNT_2048	0x3
+#define LPFC_EQ_CNT_4096	0x4
+	uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT	13
+#define lpfc_eq_context_delay_multi_MASK	0x000003FF
+#define lpfc_eq_context_delay_multi_WORD	word2
+	uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+	uint32_t sgl_pg0_addr_lo;
+	uint32_t sgl_pg0_addr_hi;
+	uint32_t sgl_pg1_addr_lo;
+	uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+	struct mbox_header header;
+	uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT	0
+#define lpfc_post_sgl_pages_xri_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD	word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT	16
+#define lpfc_post_sgl_pages_xricnt_MASK	0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD	word0
+	struct sgl_page_pairs  sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+	union  lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word0;
+	struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+	uint32_t pa_lo;
+	uint32_t pa_hi;
+	uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+	struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES	19
+	struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+	void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT	0
+#define lpfc_mbx_eq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD	word0
+			struct eq_context context;
+			struct dma_address page[LPFC_MAX_EQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT	0
+#define lpfc_mbx_eq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_eq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_eq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_nop {
+	struct mbox_header header;
+	uint32_t context[2];
+};
+
+struct cq_context {
+	uint32_t word0;
+#define lpfc_cq_context_event_SHIFT	31
+#define lpfc_cq_context_event_MASK	0x00000001
+#define lpfc_cq_context_event_WORD	word0
+#define lpfc_cq_context_valid_SHIFT	29
+#define lpfc_cq_context_valid_MASK	0x00000001
+#define lpfc_cq_context_valid_WORD	word0
+#define lpfc_cq_context_count_SHIFT	27
+#define lpfc_cq_context_count_MASK	0x00000003
+#define lpfc_cq_context_count_WORD	word0
+#define LPFC_CQ_CNT_256		0x0
+#define LPFC_CQ_CNT_512		0x1
+#define LPFC_CQ_CNT_1024	0x2
+	uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT		22
+#define lpfc_cq_eq_id_MASK		0x000000FF
+#define lpfc_cq_eq_id_WORD		word1
+	uint32_t reserved0;
+	uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT	0
+#define lpfc_mbx_cq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD	word0
+			struct cq_context context;
+			struct dma_address page[LPFC_MAX_CQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT	0
+#define lpfc_mbx_cq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_cq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_cq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct wq_context {
+	uint32_t reserved0;
+	uint32_t reserved1;
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT	0
+#define lpfc_mbx_wq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD	word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT		16
+#define lpfc_mbx_wq_create_cq_id_MASK		0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD		word0
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT	0
+#define lpfc_mbx_wq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_wq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_wq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+	uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT	16
+#define lpfc_rq_context_rq_size_MASK	0x0000000F
+#define lpfc_rq_context_rq_size_WORD	word0
+#define LPFC_RQ_RING_SIZE_512		9	/* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024		10	/* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048		11	/* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096		12	/* 4096 entries */
+	uint32_t reserved1;
+	uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT	16
+#define lpfc_rq_context_cq_id_MASK	0x000003FF
+#define lpfc_rq_context_cq_id_WORD	word2
+#define lpfc_rq_context_buf_size_SHIFT	0
+#define lpfc_rq_context_buf_size_MASK	0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD	word2
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT	0
+#define lpfc_mbx_rq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD	word0
+			struct rq_context context;
+			struct dma_address page[LPFC_MAX_WQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT	0
+#define lpfc_mbx_rq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_rq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_rq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct mq_context {
+	uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT	22
+#define lpfc_mq_context_cq_id_MASK	0x000003FF
+#define lpfc_mq_context_cq_id_WORD	word0
+#define lpfc_mq_context_count_SHIFT	16
+#define lpfc_mq_context_count_MASK	0x0000000F
+#define lpfc_mq_context_count_WORD	word0
+#define LPFC_MQ_CNT_16		0x5
+#define LPFC_MQ_CNT_32		0x6
+#define LPFC_MQ_CNT_64		0x7
+#define LPFC_MQ_CNT_128		0x8
+	uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT	31
+#define lpfc_mq_context_valid_MASK	0x00000001
+#define lpfc_mq_context_valid_WORD	word1
+	uint32_t reserved2;
+	uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT	0
+#define lpfc_mbx_mq_create_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD	word0
+			struct mq_context context;
+			struct dma_address page[LPFC_MAX_MQ_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT	0
+#define lpfc_mbx_mq_create_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD	word0
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_mq_destroy {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT	0
+#define lpfc_mbx_mq_destroy_q_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD	word0
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT  0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK   0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD   word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT   16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK    0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD    word10
+	uint32_t rpi_paddr_lo;
+	uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge {	/* SLI-4 */
+	uint32_t addr_hi;
+	uint32_t addr_lo;
+
+	uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT	0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK	0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD	word2
+#define lpfc_sli4_sge_last_SHIFT	31 /* Last SEG in the SGL sets
+						this  flag !! */
+#define lpfc_sli4_sge_last_MASK		0x00000001
+#define lpfc_sli4_sge_last_WORD		word2
+	uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT		0
+#define lpfc_sli4_sge_len_MASK		0x0001FFFF
+#define lpfc_sli4_sge_len_WORD		word3
+};
+
+struct fcf_record {
+	uint32_t max_rcv_size;
+	uint32_t fka_adv_period;
+	uint32_t fip_priority;
+	uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT		0
+#define lpfc_fcf_record_mac_0_MASK		0x000000FF
+#define lpfc_fcf_record_mac_0_WORD		word3
+#define lpfc_fcf_record_mac_1_SHIFT		8
+#define lpfc_fcf_record_mac_1_MASK		0x000000FF
+#define lpfc_fcf_record_mac_1_WORD		word3
+#define lpfc_fcf_record_mac_2_SHIFT		16
+#define lpfc_fcf_record_mac_2_MASK		0x000000FF
+#define lpfc_fcf_record_mac_2_WORD		word3
+#define lpfc_fcf_record_mac_3_SHIFT		24
+#define lpfc_fcf_record_mac_3_MASK		0x000000FF
+#define lpfc_fcf_record_mac_3_WORD		word3
+	uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT		0
+#define lpfc_fcf_record_mac_4_MASK		0x000000FF
+#define lpfc_fcf_record_mac_4_WORD		word4
+#define lpfc_fcf_record_mac_5_SHIFT		8
+#define lpfc_fcf_record_mac_5_MASK		0x000000FF
+#define lpfc_fcf_record_mac_5_WORD		word4
+#define lpfc_fcf_record_fcf_avail_SHIFT		16
+#define lpfc_fcf_record_fcf_avail_MASK		0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD		word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT	24
+#define lpfc_fcf_record_mac_addr_prov_MASK	0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD	word4
+#define LPFC_FCF_FPMA           1 	/* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA           2       /* Server Provided MAC Address */
+	uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT	0
+#define lpfc_fcf_record_fab_name_0_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD		word5
+#define lpfc_fcf_record_fab_name_1_SHIFT	8
+#define lpfc_fcf_record_fab_name_1_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD		word5
+#define lpfc_fcf_record_fab_name_2_SHIFT	16
+#define lpfc_fcf_record_fab_name_2_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD		word5
+#define lpfc_fcf_record_fab_name_3_SHIFT	24
+#define lpfc_fcf_record_fab_name_3_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD		word5
+	uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT	0
+#define lpfc_fcf_record_fab_name_4_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD		word6
+#define lpfc_fcf_record_fab_name_5_SHIFT	8
+#define lpfc_fcf_record_fab_name_5_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD		word6
+#define lpfc_fcf_record_fab_name_6_SHIFT	16
+#define lpfc_fcf_record_fab_name_6_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD		word6
+#define lpfc_fcf_record_fab_name_7_SHIFT	24
+#define lpfc_fcf_record_fab_name_7_MASK		0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD		word6
+	uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT		0
+#define lpfc_fcf_record_fc_map_0_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD		word7
+#define lpfc_fcf_record_fc_map_1_SHIFT		8
+#define lpfc_fcf_record_fc_map_1_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD		word7
+#define lpfc_fcf_record_fc_map_2_SHIFT		16
+#define lpfc_fcf_record_fc_map_2_MASK		0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD		word7
+#define lpfc_fcf_record_fcf_valid_SHIFT		24
+#define lpfc_fcf_record_fcf_valid_MASK		0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD		word7
+	uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT		0
+#define lpfc_fcf_record_fcf_index_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD		word8
+#define lpfc_fcf_record_fcf_state_SHIFT		16
+#define lpfc_fcf_record_fcf_state_MASK		0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD		word8
+	uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	union {
+		struct {
+			uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK		0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD		word10
+		} request;
+		struct {
+			uint32_t eventag;
+		} response;
+	} u;
+	uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT	0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK	0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD	word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+	union lpfc_sli4_cfg_shdr cfg_shdr;
+	uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT        0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK         0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD         word10
+	struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+	struct mbox_header header;
+	uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT	0
+#define lpfc_mbx_del_fcf_tbl_count_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD		word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT	16
+#define lpfc_mbx_del_fcf_tbl_index_MASK		0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD		word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS					0x0
+#define STATUS_FAILED 					0x1
+#define STATUS_ILLEGAL_REQUEST				0x2
+#define STATUS_ILLEGAL_FIELD				0x3
+#define STATUS_INSUFFICIENT_BUFFER 			0x4
+#define STATUS_UNAUTHORIZED_REQUEST			0x5
+#define STATUS_FLASHROM_SAVE_FAILED			0x17
+#define STATUS_FLASHROM_RESTORE_FAILED			0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED			0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 		0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM		0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM		0x1d
+#define STATUS_ASSERT_FAILED				0x1e
+#define STATUS_INVALID_SESSION				0x1f
+#define STATUS_INVALID_CONNECTION			0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT		0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH			0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID			0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND			0x26
+#define STATUS_FLASHROM_READ_FAILED			0x27
+#define STATUS_POLL_IOCTL_TIMEOUT			0x28
+#define STATUS_ERROR_ACITMAIN				0x2a
+#define STATUS_REBOOT_REQUIRED				0x2c
+#define STATUS_FCF_IN_USE				0x3a
+
+struct lpfc_mbx_sli4_config {
+	struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+	uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT		31
+#define lpfc_init_vfi_vr_MASK		0x00000001
+#define lpfc_init_vfi_vr_WORD		word1
+#define lpfc_init_vfi_vt_SHIFT		30
+#define lpfc_init_vfi_vt_MASK		0x00000001
+#define lpfc_init_vfi_vt_WORD		word1
+#define lpfc_init_vfi_vf_SHIFT		29
+#define lpfc_init_vfi_vf_MASK		0x00000001
+#define lpfc_init_vfi_vf_WORD		word1
+#define lpfc_init_vfi_vfi_SHIFT		0
+#define lpfc_init_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT	0
+#define lpfc_init_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD		word2
+	uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT		13
+#define lpfc_init_vfi_pri_MASK		0x00000007
+#define lpfc_init_vfi_pri_WORD		word3
+#define lpfc_init_vfi_vf_id_SHIFT	1
+#define lpfc_init_vfi_vf_id_MASK	0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD	word3
+	uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT	24
+#define lpfc_init_vfi_hop_count_MASK	0x000000FF
+#define lpfc_init_vfi_hop_count_WORD	word4
+};
+
+struct lpfc_mbx_reg_vfi {
+	uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT		28
+#define lpfc_reg_vfi_vp_MASK		0x00000001
+#define lpfc_reg_vfi_vp_WORD		word1
+#define lpfc_reg_vfi_vfi_SHIFT		0
+#define lpfc_reg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT		16
+#define lpfc_reg_vfi_vpi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD		word2
+#define lpfc_reg_vfi_fcfi_SHIFT		0
+#define lpfc_reg_vfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	struct ulp_bde64 bde;
+	uint32_t word8_rsvd;
+	uint32_t word9_rsvd;
+	uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT		0
+#define lpfc_reg_vfi_nport_id_MASK		0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD		word10
+};
+
+struct lpfc_mbx_init_vpi {
+	uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT		16
+#define lpfc_init_vpi_vfi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD		word1
+#define lpfc_init_vpi_vpi_SHIFT		0
+#define lpfc_init_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD		word1
+};
+
+struct lpfc_mbx_read_vpi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT	0
+#define lpfc_mbx_read_vpi_vnportid_MASK		0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD		word2
+	uint32_t word3_rsvd;
+	uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT	0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD		word4
+#define lpfc_mbx_read_vpi_pb_SHIFT		15
+#define lpfc_mbx_read_vpi_pb_MASK		0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD		word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT	16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK	0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD	word4
+#define lpfc_mbx_read_vpi_ns_SHIFT		30
+#define lpfc_mbx_read_vpi_ns_MASK		0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD		word4
+#define lpfc_mbx_read_vpi_hl_SHIFT		31
+#define lpfc_mbx_read_vpi_hl_MASK		0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD		word4
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT		0
+#define lpfc_mbx_read_vpi_vpi_MASK		0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_0_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD		word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_1_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD		word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT		16
+#define lpfc_mbx_read_vpi_mac_2_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD		word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT		24
+#define lpfc_mbx_read_vpi_mac_3_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT		0
+#define lpfc_mbx_read_vpi_mac_4_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD		word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT		8
+#define lpfc_mbx_read_vpi_mac_5_MASK		0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD		word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT	16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK		0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD		word8
+#define lpfc_mbx_read_vpi_vv_SHIFT		28
+#define lpfc_mbx_read_vpi_vv_MASK		0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD		word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+	uint32_t word1_rsvd;
+	uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT	0
+#define lpfc_unreg_vfi_vfi_MASK		0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD		word2
+};
+
+struct lpfc_mbx_resume_rpi {
+	uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT	0
+#define lpfc_resume_rpi_rpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD	word1
+	uint32_t event_tag;
+	uint32_t word3_rsvd;
+	uint32_t word4_rsvd;
+	uint32_t word5_rsvd;
+	uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT	0
+#define lpfc_resume_rpi_vpi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD	word6
+#define lpfc_resume_rpi_vfi_SHIFT	16
+#define lpfc_resume_rpi_vfi_MASK	0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD	word6
+};
+
+#define REG_FCF_INVALID_QID	0xFFFF
+struct lpfc_mbx_reg_fcfi {
+	uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT	0
+#define lpfc_reg_fcfi_info_index_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD	word1
+#define lpfc_reg_fcfi_fcfi_SHIFT	16
+#define lpfc_reg_fcfi_fcfi_MASK		0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD		word1
+	uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT	0
+#define lpfc_reg_fcfi_rq_id1_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD	word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT	16
+#define lpfc_reg_fcfi_rq_id0_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD	word2
+	uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT	0
+#define lpfc_reg_fcfi_rq_id3_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD	word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT	16
+#define lpfc_reg_fcfi_rq_id2_MASK	0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD	word3
+	uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT	24
+#define lpfc_reg_fcfi_type_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD	word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT	16
+#define lpfc_reg_fcfi_type_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD	word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD	word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask0_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD	word4
+	uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT	24
+#define lpfc_reg_fcfi_type_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD	word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT	16
+#define lpfc_reg_fcfi_type_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD	word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD	word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask1_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD	word5
+	uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT	24
+#define lpfc_reg_fcfi_type_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD	word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT	16
+#define lpfc_reg_fcfi_type_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD	word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD	word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask2_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD	word6
+	uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT	24
+#define lpfc_reg_fcfi_type_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD	word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT	16
+#define lpfc_reg_fcfi_type_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD	word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT	8
+#define lpfc_reg_fcfi_rctl_match3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD	word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT	0
+#define lpfc_reg_fcfi_rctl_mask3_MASK	0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD	word7
+	uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT		13
+#define lpfc_reg_fcfi_mam_MASK		0x00000003
+#define lpfc_reg_fcfi_mam_WORD		word8
+#define LPFC_MAM_BOTH		0	/* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA		1	/* Server Provided MAC Address */
+#define LPFC_MAM_FPMA		2	/* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT		12
+#define lpfc_reg_fcfi_vv_MASK		0x00000001
+#define lpfc_reg_fcfi_vv_WORD		word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT	0
+#define lpfc_reg_fcfi_vlan_tag_MASK	0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD	word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+	uint32_t word1_rsv;
+	uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT		0
+#define lpfc_unreg_fcfi_MASK		0x0000FFFF
+#define lpfc_unreg_fcfi_WORD		word2
+};
+
+struct lpfc_mbx_read_rev {
+	uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT  		16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK   		0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD   		word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT		20
+#define lpfc_mbx_rd_rev_fcoe_MASK		0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD		word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT		29
+#define lpfc_mbx_rd_rev_vpd_MASK		0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD		word1
+	uint32_t first_hw_rev;
+	uint32_t second_hw_rev;
+	uint32_t word4_rsvd;
+	uint32_t third_hw_rev;
+	uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT		0
+#define lpfc_mbx_rd_rev_fcph_low_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD		word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT		8
+#define lpfc_mbx_rd_rev_fcph_high_MASK		0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD		word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT	16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD	word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT	24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK	0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD	word6
+	uint32_t word7_rsvd;
+	uint32_t fw_id_rev;
+	uint8_t  fw_name[16];
+	uint32_t ulp_fw_id_rev;
+	uint8_t  ulp_fw_name[16];
+	uint32_t word18_47_rsvd[30];
+	uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT		0
+#define lpfc_mbx_rd_rev_avail_len_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD		word48
+	uint32_t vpd_paddr_low;
+	uint32_t vpd_paddr_high;
+	uint32_t avail_vpd_len;
+	uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+	uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT		0
+#define lpfc_mbx_rd_conf_max_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD		word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT		8
+#define lpfc_mbx_rd_conf_init_bbc_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT	0
+#define lpfc_mbx_rd_conf_nport_did_MASK		0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD		word2
+#define lpfc_mbx_rd_conf_topology_SHIFT		24
+#define lpfc_mbx_rd_conf_topology_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT		0
+#define lpfc_mbx_rd_conf_ao_MASK		0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD		word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT		8
+#define lpfc_mbx_rd_conf_bb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT		12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD		word3
+#define lpfc_mbx_rd_conf_mc_SHIFT		29
+#define lpfc_mbx_rd_conf_mc_MASK		0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD		word3
+	uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD		word4
+	uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_lp_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD		word5
+	uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD		word6
+	uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT		0
+#define lpfc_mbx_rd_conf_al_tov_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD		word8
+	uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT		0
+#define lpfc_mbx_rd_conf_lmt_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD		word9
+	uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT		0
+#define lpfc_mbx_rd_conf_max_alpa_MASK		0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD		word10
+	uint32_t word11_rsvd;
+	uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT		0
+#define lpfc_mbx_rd_conf_xri_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD		word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT	16
+#define lpfc_mbx_rd_conf_xri_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD		word12
+	uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_rpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD		word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_rpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD		word13
+	uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT		0
+#define lpfc_mbx_rd_conf_vpi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD		word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_vpi_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD		word14
+	uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT         0
+#define lpfc_mbx_rd_conf_vfi_base_MASK          0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD          word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT        16
+#define lpfc_mbx_rd_conf_vfi_count_MASK         0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD         word15
+	uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT	0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD		word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT	16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK	0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD	word16
+	uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_rq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD		word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_eq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD		word17
+	uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT		0
+#define lpfc_mbx_rd_conf_wq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD		word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT		16
+#define lpfc_mbx_rd_conf_cq_count_MASK		0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD		word18
+};
+
+struct lpfc_mbx_request_features {
+	uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT		0
+#define lpfc_mbx_rq_ftr_qry_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD		word1
+	uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD		word2
+	uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT		0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT		1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT		2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT		3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT		4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT		5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT		6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT		7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD		word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 			0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES	0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER		0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES	0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
+#define MB_CQE_STATUS_DMA_FAILED		0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+	uint32_t word0;
+#define lpfc_mqe_status_SHIFT		16
+#define lpfc_mqe_status_MASK		0x0000FFFF
+#define lpfc_mqe_status_WORD		word0
+#define lpfc_mqe_command_SHIFT		8
+#define lpfc_mqe_command_MASK		0x000000FF
+#define lpfc_mqe_command_WORD		word0
+	union {
+		uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+		/* sli4 mailbox commands */
+		struct lpfc_mbx_sli4_config sli4_config;
+		struct lpfc_mbx_init_vfi init_vfi;
+		struct lpfc_mbx_reg_vfi reg_vfi;
+		struct lpfc_mbx_reg_vfi unreg_vfi;
+		struct lpfc_mbx_init_vpi init_vpi;
+		struct lpfc_mbx_resume_rpi resume_rpi;
+		struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+		struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+		struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+		struct lpfc_mbx_reg_fcfi reg_fcfi;
+		struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+		struct lpfc_mbx_mq_create mq_create;
+		struct lpfc_mbx_eq_create eq_create;
+		struct lpfc_mbx_cq_create cq_create;
+		struct lpfc_mbx_wq_create wq_create;
+		struct lpfc_mbx_rq_create rq_create;
+		struct lpfc_mbx_mq_destroy mq_destroy;
+		struct lpfc_mbx_eq_destroy eq_destroy;
+		struct lpfc_mbx_cq_destroy cq_destroy;
+		struct lpfc_mbx_wq_destroy wq_destroy;
+		struct lpfc_mbx_rq_destroy rq_destroy;
+		struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+		struct lpfc_mbx_nembed_cmd nembed_cmd;
+		struct lpfc_mbx_read_rev read_rev;
+		struct lpfc_mbx_read_vpi read_vpi;
+		struct lpfc_mbx_read_config rd_config;
+		struct lpfc_mbx_request_features req_ftrs;
+		struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+		struct lpfc_mbx_nop nop;
+	} un;
+};
+
+struct lpfc_mcqe {
+	uint32_t word0;
+#define lpfc_mcqe_status_SHIFT		0
+#define lpfc_mcqe_status_MASK		0x0000FFFF
+#define lpfc_mcqe_status_WORD		word0
+#define lpfc_mcqe_ext_status_SHIFT	16
+#define lpfc_mcqe_ext_status_MASK  	0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD 	word0
+	uint32_t mcqe_tag0;
+	uint32_t mcqe_tag1;
+	uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT	31
+#define lpfc_trailer_valid_MASK		0x00000001
+#define lpfc_trailer_valid_WORD		trailer
+#define lpfc_trailer_async_SHIFT	30
+#define lpfc_trailer_async_MASK		0x00000001
+#define lpfc_trailer_async_WORD		trailer
+#define lpfc_trailer_hpi_SHIFT		29
+#define lpfc_trailer_hpi_MASK		0x00000001
+#define lpfc_trailer_hpi_WORD		trailer
+#define lpfc_trailer_completed_SHIFT	28
+#define lpfc_trailer_completed_MASK	0x00000001
+#define lpfc_trailer_completed_WORD	trailer
+#define lpfc_trailer_consumed_SHIFT	27
+#define lpfc_trailer_consumed_MASK	0x00000001
+#define lpfc_trailer_consumed_WORD	trailer
+#define lpfc_trailer_type_SHIFT		16
+#define lpfc_trailer_type_MASK		0x000000FF
+#define lpfc_trailer_type_WORD		trailer
+#define lpfc_trailer_code_SHIFT		8
+#define lpfc_trailer_code_MASK		0x000000FF
+#define lpfc_trailer_code_WORD		trailer
+#define LPFC_TRAILER_CODE_LINK	0x1
+#define LPFC_TRAILER_CODE_FCOE	0x2
+#define LPFC_TRAILER_CODE_DCBX	0x3
+};
+
+struct lpfc_acqe_link {
+	uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT		24
+#define lpfc_acqe_link_speed_MASK		0x000000FF
+#define lpfc_acqe_link_speed_WORD		word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO		0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS		0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS		0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS		0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS		0x4
+#define lpfc_acqe_link_duplex_SHIFT		16
+#define lpfc_acqe_link_duplex_MASK		0x000000FF
+#define lpfc_acqe_link_duplex_WORD		word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE		0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF		0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL		0x2
+#define lpfc_acqe_link_status_SHIFT		8
+#define lpfc_acqe_link_status_MASK		0x000000FF
+#define lpfc_acqe_link_status_WORD		word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN		0x0
+#define LPFC_ASYNC_LINK_STATUS_UP		0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN	0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP	0x3
+#define lpfc_acqe_link_physical_SHIFT		0
+#define lpfc_acqe_link_physical_MASK		0x000000FF
+#define lpfc_acqe_link_physical_WORD		word0
+#define LPFC_ASYNC_LINK_PORT_A			0x0
+#define LPFC_ASYNC_LINK_PORT_B			0x1
+	uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT	0
+#define lpfc_acqe_link_fault_MASK	0x000000FF
+#define lpfc_acqe_link_fault_WORD	word1
+#define LPFC_ASYNC_LINK_FAULT_NONE	0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL	0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE	0x2
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+	uint32_t fcf_index;
+	uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT		0
+#define lpfc_acqe_fcoe_fcf_count_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD		word1
+#define lpfc_acqe_fcoe_event_type_SHIFT		16
+#define lpfc_acqe_fcoe_event_type_MASK		0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD		word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF		0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL	0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD		0x3
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+	uint32_t tlv_ttl;
+	uint32_t reserved;
+	uint32_t event_tag;
+	uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+	struct lpfc_mqe mqe;
+	struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+	uint32_t word6;
+#define wqe_xri_SHIFT         0
+#define wqe_xri_MASK          0x0000FFFF
+#define wqe_xri_WORD          word6
+#define wqe_ctxt_tag_SHIFT    16
+#define wqe_ctxt_tag_MASK     0x0000FFFF
+#define wqe_ctxt_tag_WORD     word6
+	uint32_t word7;
+#define wqe_ct_SHIFT          2
+#define wqe_ct_MASK           0x00000003
+#define wqe_ct_WORD           word7
+#define wqe_status_SHIFT      4
+#define wqe_status_MASK       0x0000000f
+#define wqe_status_WORD       word7
+#define wqe_cmnd_SHIFT        8
+#define wqe_cmnd_MASK         0x000000ff
+#define wqe_cmnd_WORD         word7
+#define wqe_class_SHIFT       16
+#define wqe_class_MASK        0x00000007
+#define wqe_class_WORD        word7
+#define wqe_pu_SHIFT          20
+#define wqe_pu_MASK           0x00000003
+#define wqe_pu_WORD           word7
+#define wqe_erp_SHIFT         22
+#define wqe_erp_MASK          0x00000001
+#define wqe_erp_WORD          word7
+#define wqe_lnk_SHIFT         23
+#define wqe_lnk_MASK          0x00000001
+#define wqe_lnk_WORD          word7
+#define wqe_tmo_SHIFT         24
+#define wqe_tmo_MASK          0x000000ff
+#define wqe_tmo_WORD          word7
+	uint32_t abort_tag; /* word 8 in WQE */
+	uint32_t word9;
+#define wqe_reqtag_SHIFT      0
+#define wqe_reqtag_MASK       0x0000FFFF
+#define wqe_reqtag_WORD       word9
+#define wqe_rcvoxid_SHIFT     16
+#define wqe_rcvoxid_MASK       0x0000FFFF
+#define wqe_rcvoxid_WORD       word9
+	uint32_t word10;
+#define wqe_pri_SHIFT         16
+#define wqe_pri_MASK          0x00000007
+#define wqe_pri_WORD          word10
+#define wqe_pv_SHIFT          19
+#define wqe_pv_MASK           0x00000001
+#define wqe_pv_WORD           word10
+#define wqe_xc_SHIFT          21
+#define wqe_xc_MASK           0x00000001
+#define wqe_xc_WORD           word10
+#define wqe_ccpe_SHIFT        23
+#define wqe_ccpe_MASK         0x00000001
+#define wqe_ccpe_WORD         word10
+#define wqe_ccp_SHIFT         24
+#define wqe_ccp_MASK         0x000000ff
+#define wqe_ccp_WORD         word10
+	uint32_t word11;
+#define wqe_cmd_type_SHIFT  0
+#define wqe_cmd_type_MASK   0x0000000f
+#define wqe_cmd_type_WORD   word11
+#define wqe_wqec_SHIFT      7
+#define wqe_wqec_MASK       0x00000001
+#define wqe_wqec_WORD       word11
+#define wqe_cqid_SHIFT      16
+#define wqe_cqid_MASK       0x000003ff
+#define wqe_cqid_WORD       word11
+};
+
+struct wqe_did {
+	uint32_t word5;
+#define wqe_els_did_SHIFT         0
+#define wqe_els_did_MASK          0x00FFFFFF
+#define wqe_els_did_WORD          word5
+#define wqe_xmit_bls_ar_SHIFT         30
+#define wqe_xmit_bls_ar_MASK          0x00000001
+#define wqe_xmit_bls_ar_WORD          word5
+#define wqe_xmit_bls_xo_SHIFT         31
+#define wqe_xmit_bls_xo_MASK          0x00000001
+#define wqe_xmit_bls_xo_WORD          word5
+};
+
+struct els_request64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t word4;
+#define els_req64_sid_SHIFT         0
+#define els_req64_sid_MASK          0x00FFFFFF
+#define els_req64_sid_WORD          word4
+#define els_req64_sp_SHIFT          24
+#define els_req64_sp_MASK           0x00000001
+#define els_req64_sp_WORD           word4
+#define els_req64_vf_SHIFT          25
+#define els_req64_vf_MASK           0x00000001
+#define els_req64_vf_WORD           word4
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t word12;
+#define els_req64_vfid_SHIFT        1
+#define els_req64_vfid_MASK         0x00000FFF
+#define els_req64_vfid_WORD         word12
+#define els_req64_pri_SHIFT         13
+#define els_req64_pri_MASK          0x00000007
+#define els_req64_pri_WORD          word12
+	uint32_t word13;
+#define els_req64_hopcnt_SHIFT      24
+#define els_req64_hopcnt_MASK       0x000000ff
+#define els_req64_hopcnt_WORD       word13
+	uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t rsvd3;
+	uint32_t rsvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+	uint32_t payload0;
+	uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT  0
+#define xmit_bls_rsp64_rxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD   word1
+#define xmit_bls_rsp64_oxid_SHIFT  16
+#define xmit_bls_rsp64_oxid_MASK   0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD   word1
+	uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT  0
+#define xmit_bls_rsp64_seqcntlo_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD   word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT  16
+#define xmit_bls_rsp64_seqcnthi_MASK   0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD   word2
+	uint32_t rsrvd3;
+	uint32_t rsrvd4;
+	struct wqe_did	wqe_dest;
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+	uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK  0x000000001
+#define wqe_si_WORD  word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK  0x000000001
+#define wqe_la_WORD  word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK  0x000000001
+#define wqe_ls_WORD  word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK  0x0000000ff
+#define wqe_dfctl_WORD  word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK  0x0000000ff
+#define wqe_type_WORD  word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK  0x0000000ff
+#define wqe_rctl_WORD  word5
+};
+
+struct xmit_seq64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_offset;
+	uint32_t relative_offset;
+	struct wqe_rctl_dfctl wge_ctl;
+	struct wqe_common wqe_com; /* words 6-11 */
+	/* Note: word10 different REVISIT */
+	uint32_t xmit_len;
+	uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t paylaod_len;
+	uint32_t rsvd4;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t command_len;
+	uint32_t payload_len;
+	struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+	uint32_t rsrvd[5];           /* words 0-4 */
+	struct wqe_did	wqe_dest;  /* word 5 */
+	struct wqe_common wqe_com; /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+	uint32_t rsrvd[3];
+	uint32_t word3;
+#define	abort_cmd_ia_SHIFT  0
+#define	abort_cmd_ia_MASK  0x000000001
+#define	abort_cmd_ia_WORD  word3
+#define	abort_cmd_criteria_SHIFT  8
+#define	abort_cmd_criteria_MASK  0x0000000ff
+#define	abort_cmd_criteria_WORD  word3
+	uint32_t rsrvd4;
+	uint32_t rsrvd5;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;
+	uint32_t total_xfer_len;
+	uint32_t initial_xfer_len;
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+	struct ulp_bde64 bde;
+	uint32_t payload_len;          /* word 3 */
+	uint32_t total_xfer_len;       /* word 4 */
+	uint32_t rsrvd5;               /* word 5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+	struct ulp_bde64 bde;	 /* words 0-2 */
+	uint32_t rsrvd[3];             /* words 3-5 */
+	struct wqe_common wqe_com;     /* words 6-11 */
+	uint32_t rsvd_12_15[4];         /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+	uint32_t words[16];
+	struct lpfc_wqe_generic generic;
+	struct fcp_icmnd64_wqe fcp_icmd;
+	struct fcp_iread64_wqe fcp_iread;
+	struct fcp_iwrite64_wqe fcp_iwrite;
+	struct abort_cmd_wqe abort_cmd;
+	struct create_xri_wqe create_xri;
+	struct xmit_bcast64_wqe xmit_bcast64;
+	struct xmit_seq64_wqe xmit_sequence;
+	struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+	struct xmit_els_rsp64_wqe xmit_els_rsp;
+	struct els_request64_wqe els_req;
+	struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 86d1bdcbf2d..2f5907f92ee 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -34,8 +34,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -51,9 +53,23 @@ char *_dump_buf_dif;
 unsigned long _dump_buf_dif_order;
 spinlock_t _dump_buf_lock;
 
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
 static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
 
 static struct scsi_transport_template *lpfc_transport_template = NULL;
 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -92,7 +108,7 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
 		return -ENOMEM;
 	}
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	phba->link_state = LPFC_INIT_MBX_CMDS;
 
 	if (lpfc_is_LC_HBA(phba->pcidev->device)) {
@@ -205,6 +221,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
 					mb->mbxCommand, mb->mbxStatus);
 			mb->un.varDmp.word_cnt = 0;
 		}
+		/* dump mem may return a zero when finished or we got a
+		 * mailbox error, either way we are done.
+		 */
+		if (mb->un.varDmp.word_cnt == 0)
+			break;
 		if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
 			mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
 		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
@@ -233,7 +254,7 @@ out_free_mbox:
 static void
 lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 {
-	if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
+	if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
 		phba->temp_sensor_support = 1;
 	else
 		phba->temp_sensor_support = 0;
@@ -260,7 +281,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 	/* character array used for decoding dist type. */
 	char dist_char[] = "nabx";
 
-	if (pmboxq->mb.mbxStatus != MBX_SUCCESS) {
+	if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
 		mempool_free(pmboxq, phba->mbox_mem_pool);
 		return;
 	}
@@ -268,7 +289,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 	prg = (struct prog_id *) &prog_id_word;
 
 	/* word 7 contain option rom version */
-	prog_id_word = pmboxq->mb.un.varWords[7];
+	prog_id_word = pmboxq->u.mb.un.varWords[7];
 
 	/* Decode the Option rom version word to a readable string */
 	if (prg->dist < 4)
@@ -325,7 +346,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 		phba->link_state = LPFC_HBA_ERROR;
 		return -ENOMEM;
 	}
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	/* Get login parameters for NID.  */
 	lpfc_read_sparam(phba, pmb, 0);
@@ -364,6 +385,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	/* Update the fc_host data structures with new wwn. */
 	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
 	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+	fc_host_max_npiv_vports(shost) = phba->max_vpi;
 
 	/* If no serial number in VPD data, use low 6 bytes of WWNN */
 	/* This should be consolidated into parse_vpd ? - mr */
@@ -460,17 +482,18 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
 					"0352 Config MSI mailbox command "
 					"failed, mbxCmd x%x, mbxStatus x%x\n",
-					pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+					pmb->u.mb.mbxCommand,
+					pmb->u.mb.mbxStatus);
 			mempool_free(pmb, phba->mbox_mem_pool);
 			return -EIO;
 		}
 	}
 
+	spin_lock_irq(&phba->hbalock);
 	/* Initialize ERATT handling flag */
 	phba->hba_flag &= ~HBA_ERATT_HANDLED;
 
 	/* Enable appropriate host interrupts */
-	spin_lock_irq(&phba->hbalock);
 	status = readl(phba->HCregaddr);
 	status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
 	if (psli->num_rings > 0)
@@ -571,16 +594,20 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
 {
 	struct lpfc_vport **vports;
 	int i;
-	/* Disable interrupts */
-	writel(0, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
+
+	if (phba->sli_rev <= LPFC_SLI_REV3) {
+		/* Disable interrupts */
+		writel(0, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
 
 	if (phba->pport->load_flag & FC_UNLOADING)
 		lpfc_cleanup_discovery_resources(phba->pport);
 	else {
 		vports = lpfc_create_vport_work_array(phba);
 		if (vports != NULL)
-			for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+			for (i = 0; i <= phba->max_vports &&
+				vports[i] != NULL; i++)
 				lpfc_cleanup_discovery_resources(vports[i]);
 		lpfc_destroy_vport_work_array(phba, vports);
 	}
@@ -588,7 +615,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
  * @phba: pointer to lpfc HBA data structure.
  *
  * This routine will do uninitialization after the HBA is reset when bring
@@ -598,8 +625,8 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
  *   0 - sucess.
  *   Any other value - error.
  **/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
@@ -642,6 +669,77 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
 
 	return 0;
 }
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb, *psb_next;
+	LIST_HEAD(aborts);
+	int ret;
+	unsigned long iflag = 0;
+	ret = lpfc_hba_down_post_s3(phba);
+	if (ret)
+		return ret;
+	/* At this point in time the HBA is either reset or DOA. Either
+	 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+	 * on the lpfc_sgl_list so that it can either be freed if the
+	 * driver is unloading or reposted if the driver is restarting
+	 * the port.
+	 */
+	spin_lock_irq(&phba->hbalock);  /* required for lpfc_sgl_list and */
+					/* scsl_buf_list */
+	/* abts_sgl_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+			&phba->sli4_hba.lpfc_sgl_list);
+	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+	/* abts_scsi_buf_list_lock required because worker thread uses this
+	 * list.
+	 */
+	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+			&aborts);
+	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+		psb->pCmd = NULL;
+		psb->status = IOSTAT_SUCCESS;
+	}
+	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+	list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+	return (*phba->lpfc_hba_down_post)(phba);
+}
 
 /**
  * lpfc_hb_timeout - The HBA-timer timeout handler
@@ -809,7 +907,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 					"taking this port offline.\n");
 
 			spin_lock_irq(&phba->hbalock);
-			psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+			psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 			spin_unlock_irq(&phba->hbalock);
 
 			lpfc_offline_prep(phba);
@@ -834,13 +932,15 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 	struct lpfc_sli   *psli = &phba->sli;
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 	lpfc_offline_prep(phba);
 
 	lpfc_offline(phba);
 	lpfc_reset_barrier(phba);
+	spin_lock_irq(&phba->hbalock);
 	lpfc_sli_brdreset(phba);
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_hba_down_post(phba);
 	lpfc_sli_brdready(phba, HS_MBRDY);
 	lpfc_unblock_mgmt_io(phba);
@@ -849,6 +949,25 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli4_brdreset(phba);
+	lpfc_hba_down_post(phba);
+	lpfc_sli4_post_status_check(phba);
+	lpfc_unblock_mgmt_io(phba);
+	phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
  * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -864,6 +983,16 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	struct lpfc_sli_ring  *pring;
 	struct lpfc_sli *psli = &phba->sli;
 
+	/* If the pci channel is offline, ignore possible errors,
+	 * since we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev)) {
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~DEFER_ERATT;
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 		"0479 Deferred Adapter Hardware Error "
 		"Data: x%x x%x x%x\n",
@@ -871,7 +1000,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 		phba->work_status[0], phba->work_status[1]);
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 
@@ -909,13 +1038,30 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
 		phba->work_hs = old_host_status & ~HS_FFER1;
 
+	spin_lock_irq(&phba->hbalock);
 	phba->hba_flag &= ~DEFER_ERATT;
+	spin_unlock_irq(&phba->hbalock);
 	phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
 	phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
 }
 
+static void
+lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
+{
+	struct lpfc_board_event_header board_event;
+	struct Scsi_Host *shost;
+
+	board_event.event_type = FC_REG_BOARD_EVENT;
+	board_event.subcategory = LPFC_EVENT_PORTINTERR;
+	shost = lpfc_shost_from_vport(phba->pport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(board_event),
+				  (char *) &board_event,
+				  LPFC_NL_VENDOR_ID);
+}
+
 /**
- * lpfc_handle_eratt - The HBA hardware error handler
+ * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to handle the following HBA hardware error
@@ -924,8 +1070,8 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
  * 2 - DMA ring index out of range
  * 3 - Mailbox command came back as unknown
  **/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
+static void
+lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 {
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_sli   *psli = &phba->sli;
@@ -934,24 +1080,23 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 	unsigned long temperature;
 	struct temp_event temp_event_data;
 	struct Scsi_Host  *shost;
-	struct lpfc_board_event_header board_event;
 
 	/* If the pci channel is offline, ignore possible errors,
-	 * since we cannot communicate with the pci card anyway. */
-	if (pci_channel_offline(phba->pcidev))
+	 * since we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev)) {
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~DEFER_ERATT;
+		spin_unlock_irq(&phba->hbalock);
 		return;
+	}
+
 	/* If resets are disabled then leave the HBA alone and return */
 	if (!phba->cfg_enable_hba_reset)
 		return;
 
 	/* Send an internal error event to mgmt application */
-	board_event.event_type = FC_REG_BOARD_EVENT;
-	board_event.subcategory = LPFC_EVENT_PORTINTERR;
-	shost = lpfc_shost_from_vport(phba->pport);
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-				  sizeof(board_event),
-				  (char *) &board_event,
-				  LPFC_NL_VENDOR_ID);
+	lpfc_board_errevt_to_mgmt(phba);
 
 	if (phba->hba_flag & DEFER_ERATT)
 		lpfc_handle_deferred_eratt(phba);
@@ -965,7 +1110,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 				phba->work_status[0], phba->work_status[1]);
 
 		spin_lock_irq(&phba->hbalock);
-		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+		psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 		spin_unlock_irq(&phba->hbalock);
 
 		/*
@@ -1037,6 +1182,65 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	uint32_t event_data;
+	struct Scsi_Host *shost;
+
+	/* If the pci channel is offline, ignore possible errors, since
+	 * we cannot communicate with the pci card anyway.
+	 */
+	if (pci_channel_offline(phba->pcidev))
+		return;
+	/* If resets are disabled then leave the HBA alone and return */
+	if (!phba->cfg_enable_hba_reset)
+		return;
+
+	/* Send an internal error event to mgmt application */
+	lpfc_board_errevt_to_mgmt(phba);
+
+	/* For now, the actual action for SLI4 device handling is not
+	 * specified yet, just treated it as adaptor hardware failure
+	 */
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+			phba->work_status[0], phba->work_status[1]);
+
+	event_data = FC_REG_DUMP_EVENT;
+	shost = lpfc_shost_from_vport(vport);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(event_data), (char *) &event_data,
+				  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+	lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ *   0 - sucess.
+ *   Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+	(*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
  * lpfc_handle_latt - The HBA link event handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -1137,7 +1341,7 @@ lpfc_handle_latt_err_exit:
  *   0 - pointer to the VPD passed in is NULL
  *   1 - success
  **/
-static int
+int
 lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
 {
 	uint8_t lenlo, lenhi;
@@ -1292,6 +1496,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 	uint16_t dev_id = phba->pcidev->device;
 	int max_speed;
 	int GE = 0;
+	int oneConnect = 0; /* default is not a oneConnect */
 	struct {
 		char * name;
 		int    max_speed;
@@ -1437,6 +1642,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 	case PCI_DEVICE_ID_PROTEUS_S:
 		m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
 		break;
+	case PCI_DEVICE_ID_TIGERSHARK:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+		break;
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		oneConnect = 1;
+		m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+		break;
 	default:
 		m = (typeof(m)){ NULL };
 		break;
@@ -1444,13 +1657,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 
 	if (mdp && mdp[0] == '\0')
 		snprintf(mdp, 79,"%s", m.name);
-	if (descp && descp[0] == '\0')
-		snprintf(descp, 255,
-			"Emulex %s %d%s %s %s",
-			m.name, m.max_speed,
-			(GE) ? "GE" : "Gb",
-			m.bus,
-			(GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+	/* oneConnect hba requires special processing, they are all initiators
+	 * and we put the port number on the end
+	 */
+	if (descp && descp[0] == '\0') {
+		if (oneConnect)
+			snprintf(descp, 255,
+				"Emulex OneConnect %s, FCoE Initiator, Port %s",
+				m.name,
+				phba->Port);
+		else
+			snprintf(descp, 255,
+				"Emulex %s %d%s %s %s",
+				m.name, m.max_speed,
+				(GE) ? "GE" : "Gb",
+				m.bus,
+				(GE) ? "FCoE Adapter" :
+					"Fibre Channel Adapter");
+	}
 }
 
 /**
@@ -1533,7 +1757,8 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
 		icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
 		icmd->ulpLe = 1;
 
-		if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
+		if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
+		    IOCB_ERROR) {
 			lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
 			kfree(mp1);
 			cnt++;
@@ -1761,7 +1986,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
 	 * Lets wait for this to happen, if needed.
 	 */
 	while (!list_empty(&vport->fc_nodes)) {
-
 		if (i++ > 3000) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
 				"0233 Nodelist not empty\n");
@@ -1782,7 +2006,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
 		/* Wait for any activity on ndlps to settle */
 		msleep(10);
 	}
-	return;
 }
 
 /**
@@ -1803,22 +2026,36 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
+ * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine stops all the timers associated with a HBA. This function is
  * invoked before either putting a HBA offline or unloading the driver.
  **/
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
+void
+lpfc_stop_hba_timers(struct lpfc_hba *phba)
 {
-	del_timer_sync(&phba->fcp_poll_timer);
 	lpfc_stop_vport_timers(phba->pport);
 	del_timer_sync(&phba->sli.mbox_tmo);
 	del_timer_sync(&phba->fabric_block_timer);
-	phba->hb_outstanding = 0;
-	del_timer_sync(&phba->hb_tmofunc);
 	del_timer_sync(&phba->eratt_poll);
+	del_timer_sync(&phba->hb_tmofunc);
+	phba->hb_outstanding = 0;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		/* Stop any LightPulse device specific driver timers */
+		del_timer_sync(&phba->fcp_poll_timer);
+		break;
+	case LPFC_PCI_DEV_OC:
+		/* Stop any OneConnect device sepcific driver timers */
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0297 Invalid device group (x%x)\n",
+				phba->pci_dev_grp);
+		break;
+	}
 	return;
 }
 
@@ -1878,14 +2115,21 @@ lpfc_online(struct lpfc_hba *phba)
 		return 1;
 	}
 
-	if (lpfc_sli_hba_setup(phba)) {	/* Initialize the HBA */
-		lpfc_unblock_mgmt_io(phba);
-		return 1;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
+	} else {
+		if (lpfc_sli_hba_setup(phba)) {	/* Initialize SLI2/SLI3 HBA */
+			lpfc_unblock_mgmt_io(phba);
+			return 1;
+		}
 	}
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
@@ -1947,11 +2191,12 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 	/* Issue an unreg_login to all nodes on all vports */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL) {
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			struct Scsi_Host *shost;
 
 			if (vports[i]->load_flag & FC_UNLOADING)
 				continue;
+			vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
 			shost =	lpfc_shost_from_vport(vports[i]);
 			list_for_each_entry_safe(ndlp, next_ndlp,
 						 &vports[i]->fc_nodes,
@@ -1975,7 +2220,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 	}
 	lpfc_destroy_vport_work_array(phba, vports);
 
-	lpfc_sli_flush_mbox_queue(phba);
+	lpfc_sli_mbox_sys_shutdown(phba);
 }
 
 /**
@@ -1996,11 +2241,11 @@ lpfc_offline(struct lpfc_hba *phba)
 	if (phba->pport->fc_flag & FC_OFFLINE_MODE)
 		return;
 
-	/* stop all timers associated with this hba */
-	lpfc_stop_phba_timers(phba);
+	/* stop port and all timers associated with this hba */
+	lpfc_stop_port(phba);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 			lpfc_stop_vport_timers(vports[i]);
 	lpfc_destroy_vport_work_array(phba, vports);
 	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2013,7 +2258,7 @@ lpfc_offline(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			spin_lock_irq(shost->host_lock);
 			vports[i]->work_port_events = 0;
@@ -2106,6 +2351,10 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	shost->max_lun = vport->cfg_max_luns;
 	shost->this_id = -1;
 	shost->max_cmd_len = 16;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+		shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+	}
 
 	/*
 	 * Set initial can_queue value since 0 is no longer supported and
@@ -2123,6 +2372,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 
 	/* Initialize all internally managed lists. */
 	INIT_LIST_HEAD(&vport->fc_nodes);
+	INIT_LIST_HEAD(&vport->rcv_buffer_list);
 	spin_lock_init(&vport->work_port_lock);
 
 	init_timer(&vport->fc_disctmo);
@@ -2314,15 +2564,3461 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s3(struct lpfc_hba *phba)
+{
+	/* Clear all interrupt enable conditions */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	/* Clear all pending interrupts */
+	writel(0xffffffff, phba->HAregaddr);
+	readl(phba->HAregaddr); /* flush */
+
+	/* Reset some HBA SLI setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_stop_port_s4 - Stop SLI4 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
+{
+	/* Reset some HBA SLI4 setup states */
+	lpfc_stop_hba_timers(phba);
+	phba->pport->work_port_events = 0;
+	phba->sli4_hba.intr_enable = 0;
+	/* Hard clear it for now, shall have more graceful way to wait later */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
+
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+	phba->lpfc_stop_port(phba);
+}
+
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port.  This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+	uint32_t mbox_tmo, req_len;
+	uint32_t shdr_status, shdr_add_status;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2020 Failed to allocate mbox for ADD_FCF cmd\n");
+		return;
+	}
+
+	req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr);
+	rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			      LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+			      req_len, LPFC_SLI4_MBX_EMBED);
+	/*
+	 * In phase 1, there is a single FCF index, 0.  In phase2, the driver
+	 * supports multiple FCF indices.
+	 */
+	del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+	bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+	bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+	       phba->fcf.fcf_indx);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	}
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &del_fcf_record->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &del_fcf_record->header.cfg_shdr.response);
+	if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2516 DEL FCF of default FCF Index failed "
+				"mbx status x%x, status x%x add_status x%x\n",
+				rc, shdr_status, shdr_add_status);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+			   struct lpfc_acqe_link *acqe_link)
+{
+	uint16_t latt_fault;
+
+	switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+	case LPFC_ASYNC_LINK_FAULT_NONE:
+	case LPFC_ASYNC_LINK_FAULT_LOCAL:
+	case LPFC_ASYNC_LINK_FAULT_REMOTE:
+		latt_fault = 0;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0398 Invalid link fault code: x%x\n",
+				bf_get(lpfc_acqe_link_fault, acqe_link));
+		latt_fault = MBXERR_ERROR;
+		break;
+	}
+	return latt_fault;
+}
+
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+			  struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t att_type;
+
+	switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+	case LPFC_ASYNC_LINK_STATUS_DOWN:
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+		att_type = AT_LINK_DOWN;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_UP:
+		/* Ignore physical link up events - wait for logical link up */
+		att_type = AT_RESERVED;
+		break;
+	case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+		att_type = AT_LINK_UP;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0399 Invalid link attention type: x%x\n",
+				bf_get(lpfc_acqe_link_status, acqe_link));
+		att_type = AT_RESERVED;
+		break;
+	}
+	return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+				struct lpfc_acqe_link *acqe_link)
+{
+	uint8_t link_speed;
+
+	switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+	case LPFC_ASYNC_LINK_SPEED_ZERO:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_100MBPS:
+		link_speed = LA_UNKNW_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_1GBPS:
+		link_speed = LA_1GHZ_LINK;
+		break;
+	case LPFC_ASYNC_LINK_SPEED_10GBPS:
+		link_speed = LA_10GHZ_LINK;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0483 Invalid link-attention link speed: x%x\n",
+				bf_get(lpfc_acqe_link_speed, acqe_link));
+		link_speed = LA_UNKNW_LINK;
+		break;
+	}
+	return link_speed;
+}
+
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_link *acqe_link)
+{
+	struct lpfc_dmabuf *mp;
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *mb;
+	READ_LA_VAR *la;
+	uint8_t att_type;
+
+	att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+	if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+		return;
+	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0395 The mboxq allocation failed\n");
+		return;
+	}
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!mp) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0396 The lpfc_dmabuf allocation failed\n");
+		goto out_free_pmb;
+	}
+	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+	if (!mp->virt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0397 The mbuf allocation failed\n");
+		goto out_free_dmabuf;
+	}
+
+	/* Cleanup any outstanding ELS commands */
+	lpfc_els_flush_all_cmd(phba);
+
+	/* Block ELS IOCBs until we have done process link event */
+	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+	/* Update link event statistics */
+	phba->sli.slistat.link_event++;
+
+	/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+	lpfc_read_la(phba, pmb, mp);
+	pmb->vport = phba->pport;
+
+	/* Parse and translate status field */
+	mb = &pmb->u.mb;
+	mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+	/* Parse and translate link attention fields */
+	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+	la->eventTag = acqe_link->event_tag;
+	la->attType = att_type;
+	la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+	/* Fake the the following irrelvant fields */
+	la->topology = TOPOLOGY_PT_PT;
+	la->granted_AL_PA = 0;
+	la->il = 0;
+	la->pb = 0;
+	la->fa = 0;
+	la->mm = 0;
+
+	/* Keep the link status for extra SLI4 state machine reference */
+	phba->sli4_hba.link_state.speed =
+				bf_get(lpfc_acqe_link_speed, acqe_link);
+	phba->sli4_hba.link_state.duplex =
+				bf_get(lpfc_acqe_link_duplex, acqe_link);
+	phba->sli4_hba.link_state.status =
+				bf_get(lpfc_acqe_link_status, acqe_link);
+	phba->sli4_hba.link_state.physical =
+				bf_get(lpfc_acqe_link_physical, acqe_link);
+	phba->sli4_hba.link_state.fault =
+				bf_get(lpfc_acqe_link_fault, acqe_link);
+
+	/* Invoke the lpfc_handle_latt mailbox command callback function */
+	lpfc_mbx_cmpl_read_la(phba, pmb);
+
+	return;
+
+out_free_dmabuf:
+	kfree(mp);
+out_free_pmb:
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous fcoe event.
+ **/
+static void
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_fcoe *acqe_fcoe)
+{
+	uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+	int rc;
+
+	switch (event_type) {
+	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2546 New FCF found index 0x%x tag 0x%x \n",
+			acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/*
+		 * If the current FCF is in discovered state,
+		 * do nothing.
+		 */
+		spin_lock_irq(&phba->hbalock);
+		if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+			spin_unlock_irq(&phba->hbalock);
+			break;
+		}
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Read the FCF table and re-discover SAN. */
+		rc = lpfc_sli4_read_fcf_record(phba,
+			LPFC_FCOE_FCF_GET_FIRST);
+		if (rc)
+			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+				"2547 Read FCF record failed 0x%x\n",
+				rc);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2548 FCF Table full count 0x%x tag 0x%x \n",
+			bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+			acqe_fcoe->event_tag);
+		break;
+
+	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2549 FCF disconnected fron network index 0x%x"
+			" tag 0x%x \n", acqe_fcoe->fcf_index,
+			acqe_fcoe->event_tag);
+		/* If the event is not for currently used fcf do nothing */
+		if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+			break;
+		/*
+		 * Currently, driver support only one FCF - so treat this as
+		 * a link down.
+		 */
+		lpfc_linkdown(phba);
+		/* Unregister FCF if no devices connected to it */
+		lpfc_unregister_unused_fcf(phba);
+		break;
+
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0288 Unknown FCoE event type 0x%x event tag "
+			"0x%x\n", event_type, acqe_fcoe->event_tag);
+		break;
+	}
+}
+
+/**
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+			 struct lpfc_acqe_dcbx *acqe_dcbx)
+{
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0290 The SLI4 DCBX asynchronous event is not "
+			"handled yet\n");
+}
+
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the async event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ASYNC_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the async events */
+	while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Process the asynchronous event */
+		switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+		case LPFC_TRAILER_CODE_LINK:
+			lpfc_sli4_async_link_evt(phba,
+						 &cq_event->cqe.acqe_link);
+			break;
+		case LPFC_TRAILER_CODE_FCOE:
+			lpfc_sli4_async_fcoe_evt(phba,
+						 &cq_event->cqe.acqe_fcoe);
+			break;
+		case LPFC_TRAILER_CODE_DCBX:
+			lpfc_sli4_async_dcbx_evt(phba,
+						 &cq_event->cqe.acqe_dcbx);
+			break;
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"1804 Invalid asynchrous event code: "
+					"x%x\n", bf_get(lpfc_trailer_code,
+					&cq_event->cqe.mcqe_cmpl));
+			break;
+		}
+		/* Free the completion event processed to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
+ * @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+	int rc;
+
+	/* Set up lpfc PCI-device group */
+	phba->pci_dev_grp = dev_grp;
+
+	/* The LPFC_PCI_DEV_OC uses SLI4 */
+	if (dev_grp == LPFC_PCI_DEV_OC)
+		phba->sli_rev = LPFC_SLI_REV4;
+
+	/* Set up device INIT API function jump table */
+	rc = lpfc_init_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SCSI API function jump table */
+	rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up SLI API function jump table */
+	rc = lpfc_sli_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+	/* Set up MBOX API function jump table */
+	rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+	if (rc)
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
+ * lpfc_log_intr_mode - Log the active interrupt mode
+ * @phba: pointer to lpfc hba data structure.
+ * @intr_mode: active interrupt mode adopted.
+ *
+ * This routine it invoked to log the currently used active interrupt mode
+ * to the device.
+ **/
+static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+{
+	switch (intr_mode) {
+	case 0:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0470 Enable INTx interrupt mode.\n");
+		break;
+	case 1:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0481 Enabled MSI interrupt mode.\n");
+		break;
+	case 2:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0480 Enabled MSI-X interrupt mode.\n");
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0482 Illegal interrupt mode.\n");
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_enable_pci_dev - Enable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the PCI device that is common to all
+ * PCI devices.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_enable_pci_dev(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	int bars;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		goto out_error;
+	else
+		pdev = phba->pcidev;
+	/* Select PCI BARs */
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	/* Enable PCI device */
+	if (pci_enable_device_mem(pdev))
+		goto out_error;
+	/* Request PCI resource for the device */
+	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+		goto out_disable_device;
+	/* Set up device as PCI master and save state for EEH */
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+	pci_save_state(pdev);
+
+	return 0;
+
+out_disable_device:
+	pci_disable_device(pdev);
+out_error:
+	return -ENODEV;
+}
+
+/**
+ * lpfc_disable_pci_dev - Disable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the PCI device that is common to all
+ * PCI devices.
+ **/
+static void
+lpfc_disable_pci_dev(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	int bars;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+	/* Select PCI BARs */
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	/* Release PCI resource and disable PCI device */
+	pci_release_selected_regions(pdev, bars);
+	pci_disable_device(pdev);
+	/* Null out PCI private reference to driver */
+	pci_set_drvdata(pdev, NULL);
+
+	return;
+}
+
+/**
+ * lpfc_reset_hba - Reset a hba
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to reset a hba device. It brings the HBA
+ * offline, performs a board restart, and then brings the board back
+ * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
+ * on outstanding mailbox commands.
+ **/
+void
+lpfc_reset_hba(struct lpfc_hba *phba)
+{
+	/* If resets are disabled then set error state and return. */
+	if (!phba->cfg_enable_hba_reset) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return;
+	}
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	lpfc_sli_brdrestart(phba);
+	lpfc_online(phba);
+	lpfc_unblock_mgmt_io(phba);
+}
+
+/**
+ * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-3 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* FCP polling mode timer */
+	init_timer(&phba->fcp_poll_timer);
+	phba->fcp_poll_timer.function = lpfc_poll_timeout;
+	phba->fcp_poll_timer.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+
+	/* Host attention work mask setup */
+	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
+	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 */
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+		sizeof(struct fcp_rsp) +
+			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+	if (phba->cfg_enable_bg) {
+		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+		phba->cfg_sg_dma_buf_size +=
+			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+	}
+
+	/* Also reinitialize the host templates with new values. */
+	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after config_port mbox */
+	phba->max_vports = 0;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc HBAs.
+	 */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-3 HBA device it attached to.
+ **/
+static void
+lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
+{
+	/* Free device driver memory allocated */
+	lpfc_mem_free_all(phba);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	int rc;
+	int i, hbq_count;
+
+	/* Before proceed, wait for POST done and device ready */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (rc)
+		return -ENODEV;
+
+	/*
+	 * Initialize timers used by driver
+	 */
+
+	/* Heartbeat timer */
+	init_timer(&phba->hb_tmofunc);
+	phba->hb_tmofunc.function = lpfc_hb_timeout;
+	phba->hb_tmofunc.data = (unsigned long)phba;
+
+	psli = &phba->sli;
+	/* MBOX heartbeat timer */
+	init_timer(&psli->mbox_tmo);
+	psli->mbox_tmo.function = lpfc_mbox_timeout;
+	psli->mbox_tmo.data = (unsigned long) phba;
+	/* Fabric block timer */
+	init_timer(&phba->fabric_block_timer);
+	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+	phba->fabric_block_timer.data = (unsigned long) phba;
+	/* EA polling mode timer */
+	init_timer(&phba->eratt_poll);
+	phba->eratt_poll.function = lpfc_poll_eratt;
+	phba->eratt_poll.data = (unsigned long) phba;
+	/*
+	 * We need to do a READ_CONFIG mailbox command here before
+	 * calling lpfc_get_cfgparam. For VFs this will report the
+	 * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+	 * All of the resources allocated
+	 * for this Port are tied to these values.
+	 */
+	/* Get all the module params for configuring this host */
+	lpfc_get_cfgparam(phba);
+	phba->max_vpi = LPFC_MAX_VPI;
+	/* This will be set to correct value after the read_config mbox */
+	phba->max_vports = 0;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	/*
+	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+	 * used to create the sg_dma_buf_pool must be dynamically calculated.
+	 * 2 segments are added since the IOCB needs a command and response bde.
+	 * To insure that the scsi sgl does not cross a 4k page boundary only
+	 * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+	 * Table of sgl sizes and seg_cnt:
+	 * sgl size, 	sg_seg_cnt	total seg
+	 * 1k		50		52
+	 * 2k		114		116
+	 * 4k		242		244
+	 * 8k		498		500
+	 * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+	 * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+	 * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+	 * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+	 */
+	if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+		phba->cfg_sg_seg_cnt = 50;
+	else if (phba->cfg_sg_seg_cnt <= 114)
+		phba->cfg_sg_seg_cnt = 114;
+	else if (phba->cfg_sg_seg_cnt <= 242)
+		phba->cfg_sg_seg_cnt = 242;
+	else
+		phba->cfg_sg_seg_cnt = 498;
+
+	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+					+ sizeof(struct fcp_rsp);
+	phba->cfg_sg_dma_buf_size +=
+		((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+	/* Initialize buffer queue management fields */
+	hbq_count = lpfc_sli_hbq_count();
+	for (i = 0; i < hbq_count; ++i)
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+	/*
+	 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+	 */
+	/* Initialize the Abort scsi buffer list used by driver */
+	spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+	/* This abort list used by worker thread */
+	spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+	/*
+	 * Initialize dirver internal slow-path work queues
+	 */
+
+	/* Driver internel slow-path CQ Event pool */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+	/* Response IOCB work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Asynchronous event CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+	/* Fast-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+	/* Slow-path XRI aborted CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+	/* Receive queue CQ Event work queue list */
+	INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+	/* Initialize the driver internal SLI layer lists. */
+	lpfc_sli_setup(phba);
+	lpfc_sli_queue_setup(phba);
+
+	/* Allocate device driver memory */
+	rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+	if (rc)
+		return -ENOMEM;
+
+	/* Create the bootstrap mailbox command */
+	rc = lpfc_create_bootstrap_mbox(phba);
+	if (unlikely(rc))
+		goto out_free_mem;
+
+	/* Set up the host's endian order with the device. */
+	rc = lpfc_setup_endian_order(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Set up the hba's configuration parameters. */
+	rc = lpfc_sli4_read_config(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Perform a function reset */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		goto out_free_bsmbx;
+
+	/* Create all the SLI4 queues */
+	rc = lpfc_sli4_queue_create(phba);
+	if (rc)
+		goto out_free_bsmbx;
+
+	/* Create driver internal CQE event pool */
+	rc = lpfc_sli4_cq_event_pool_create(phba);
+	if (rc)
+		goto out_destroy_queue;
+
+	/* Initialize and populate the iocb list per host */
+	rc = lpfc_init_sgl_list(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1400 Failed to initialize sgl list.\n");
+		goto out_destroy_cq_event_pool;
+	}
+	rc = lpfc_init_active_sgl_array(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1430 Failed to initialize sgl list.\n");
+		goto out_free_sgl_list;
+	}
+
+	rc = lpfc_sli4_init_rpi_hdrs(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1432 Failed to initialize rpi headers.\n");
+		goto out_free_active_sgl;
+	}
+
+	phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+				    phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_eq_hdl) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2572 Failed allocate memory for fast-path "
+				"per-EQ handle array\n");
+		goto out_remove_rpi_hdrs;
+	}
+
+	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+				      phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+	if (!phba->sli4_hba.msix_entries) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2573 Failed allocate memory for msi-x "
+				"interrupt vector entries\n");
+		goto out_free_fcp_eq_hdl;
+	}
+
+	return rc;
+
+out_free_fcp_eq_hdl:
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+	lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+	lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+	lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+	lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+	lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+	lpfc_mem_free(phba);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+	/* Free the default FCR table */
+	lpfc_sli_remove_dflt_fcf(phba);
+
+	/* Free memory allocated for msi-x interrupt vector entries */
+	kfree(phba->sli4_hba.msix_entries);
+
+	/* Free memory allocated for fast-path work queue handles */
+	kfree(phba->sli4_hba.fcp_eq_hdl);
+
+	/* Free the allocated rpi headers. */
+	lpfc_sli4_remove_rpi_hdrs(phba);
+
+	/* Free the ELS sgl list */
+	lpfc_free_active_sgl(phba);
+	lpfc_free_sgl_list(phba);
+
+	/* Free the SCSI sgl management array */
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+	/* Free the SLI4 queues */
+	lpfc_sli4_queue_destroy(phba);
+
+	/* Free the completion queue EQ event pool */
+	lpfc_sli4_cq_event_release_all(phba);
+	lpfc_sli4_cq_event_pool_destroy(phba);
+
+	/* Reset SLI4 HBA FCoE function */
+	lpfc_pci_function_reset(phba);
+
+	/* Free the bsmbx region. */
+	lpfc_destroy_bootstrap_mbox(phba);
+
+	/* Free the SLI Layer memory with SLI4 HBAs */
+	lpfc_mem_free_all(phba);
+
+	/* Free the current connect table */
+	list_for_each_entry_safe(conn_entry, next_conn_entry,
+		&phba->fcf_conn_rec_list, list)
+		kfree(conn_entry);
+
+	return;
+}
+
+/**
+ * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the device INIT interface API function jump table
+ * in @phba struct.
+ *
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
+		phba->lpfc_stop_port = lpfc_stop_port_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+		phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+		phba->lpfc_stop_port = lpfc_stop_port_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1431 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources before the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
+{
+	/*
+	 * Driver resources common to all SLI revisions
+	 */
+	atomic_set(&phba->fast_event_count, 0);
+	spin_lock_init(&phba->hbalock);
+
+	/* Initialize ndlp management spinlock */
+	spin_lock_init(&phba->ndlp_lock);
+
+	INIT_LIST_HEAD(&phba->port_list);
+	INIT_LIST_HEAD(&phba->work_list);
+	init_waitqueue_head(&phba->wait_4_mlo_m_q);
+
+	/* Initialize the wait queue head for the kernel thread */
+	init_waitqueue_head(&phba->work_waitq);
+
+	/* Initialize the scsi buffer list used by driver for scsi IO */
+	spin_lock_init(&phba->scsi_buf_list_lock);
+	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+
+	/* Initialize the fabric iocb list */
+	INIT_LIST_HEAD(&phba->fabric_iocb_list);
+
+	/* Initialize list to save ELS buffers */
+	INIT_LIST_HEAD(&phba->elsbuf);
+
+	/* Initialize FCF connection rec list */
+	INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
+
+	return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources after the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
+{
+	int error;
+
+	/* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					  "lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		return error;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up after
+ * the device specific resource setup for supporting the HBA device it
+ * attached to.
+ **/
+static void
+lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
+{
+	/* Stop kernel worker thread */
+	kthread_stop(phba->worker_thread);
+}
+
+/**
+ * lpfc_free_iocb_list - Free iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's IOCB list and memory.
+ **/
+static void
+lpfc_free_iocb_list(struct lpfc_hba *phba)
+{
+	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
+
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(iocbq_entry, iocbq_next,
+				 &phba->lpfc_iocb_list, list) {
+		list_del(&iocbq_entry->list);
+		kfree(iocbq_entry);
+		phba->total_iocbq_bufs--;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	return;
+}
+
+/**
+ * lpfc_init_iocb_list - Allocate and initialize iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's IOCB
+ * list and set up the IOCB tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
+{
+	struct lpfc_iocbq *iocbq_entry = NULL;
+	uint16_t iotag;
+	int i;
+
+	/* Initialize and populate the iocb list per host.  */
+	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
+	for (i = 0; i < iocb_count; i++) {
+		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
+		if (iocbq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d iocbs of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, LPFC_IOCB_LIST_CNT);
+			goto out_free_iocbq;
+		}
+
+		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
+		if (iotag == 0) {
+			kfree(iocbq_entry);
+			printk(KERN_ERR "%s: failed to allocate IOTAG. "
+				"Unloading driver.\n", __func__);
+			goto out_free_iocbq;
+		}
+		iocbq_entry->sli4_xritag = NO_XRI;
+
+		spin_lock_irq(&phba->hbalock);
+		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
+		phba->total_iocbq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	return 0;
+
+out_free_iocbq:
+	lpfc_free_iocb_list(phba);
+
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	LIST_HEAD(sglq_list);
+	int rc = 0;
+
+	spin_lock_irq(&phba->hbalock);
+	list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+	spin_unlock_irq(&phba->hbalock);
+
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+				 &sglq_list, list) {
+		list_del(&sglq_entry->list);
+		lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+		kfree(sglq_entry);
+		phba->sli4_hba.total_sglq_bufs--;
+	}
+	rc = lpfc_sli4_remove_all_sgl_pages(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2005 Unable to deregister pages from HBA: %x", rc);
+	}
+	kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+	int size;
+	size = sizeof(struct lpfc_sglq *);
+	size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+	phba->sli4_hba.lpfc_sglq_active_list =
+		kzalloc(size, GFP_KERNEL);
+	if (!phba->sli4_hba.lpfc_sglq_active_list)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ *	0 - sucessful
+ *	other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry = NULL;
+	int i;
+	int els_xri_cnt;
+
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2400 lpfc_init_sgl_list els %d.\n",
+				els_xri_cnt);
+	/* Initialize and populate the sglq list per host/VF. */
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+	/* Sanity check on XRI management */
+	if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2562 No room left for SCSI XRI allocation: "
+				"max_xri=%d, els_xri=%d\n",
+				phba->sli4_hba.max_cfg_param.max_xri,
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for the ELS XRI management array */
+	phba->sli4_hba.lpfc_els_sgl_array =
+			kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+			GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_els_sgl_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2401 Failed to allocate memory for ELS "
+				"XRI management array of size %d.\n",
+				els_xri_cnt);
+		return -ENOMEM;
+	}
+
+	/* Keep the SCSI XRI into the XRI management array */
+	phba->sli4_hba.scsi_xri_max =
+			phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+	phba->sli4_hba.scsi_xri_cnt = 0;
+
+	phba->sli4_hba.lpfc_scsi_psb_array =
+			kzalloc((sizeof(struct lpfc_scsi_buf *) *
+			phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+	if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2563 Failed to allocate memory for SCSI "
+				"XRI management array of size %d.\n",
+				phba->sli4_hba.scsi_xri_max);
+		kfree(phba->sli4_hba.lpfc_els_sgl_array);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < els_xri_cnt; i++) {
+		sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+		if (sglq_entry == NULL) {
+			printk(KERN_ERR "%s: only allocated %d sgls of "
+				"expected %d count. Unloading driver.\n",
+				__func__, i, els_xri_cnt);
+			goto out_free_mem;
+		}
+
+		sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (sglq_entry->sli4_xritag == NO_XRI) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate XRI.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->buff_type = GEN_BUFF_TYPE;
+		sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+		if (sglq_entry->virt == NULL) {
+			kfree(sglq_entry);
+			printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+				"Unloading driver.\n", __func__);
+			goto out_free_mem;
+		}
+		sglq_entry->sgl = sglq_entry->virt;
+		memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+		/* The list order is used by later block SGL registraton */
+		spin_lock_irq(&phba->hbalock);
+		list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+		phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+		phba->sli4_hba.total_sglq_bufs++;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return 0;
+
+out_free_mem:
+	kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+	lpfc_free_sgl_list(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+	int rc = 0;
+	int longs;
+	uint16_t rpi_count;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * Provision an rpi bitmask range for discovery. The total count
+	 * is the difference between max and base + 1.
+	 */
+	rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+					   GFP_KERNEL);
+	if (!phba->sli4_hba.rpi_bmask)
+		return -ENOMEM;
+
+	rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+	if (!rpi_hdr) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0391 Error during rpi post operation\n");
+		lpfc_sli4_remove_rpis(phba);
+		rc = -ENODEV;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba.  This single region
+ * provides support for up to 64 rpis.  The region is used globally
+ * by the device.
+ *
+ * Returns:
+ *   A valid rpi hdr on success.
+ *   A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+	uint16_t rpi_limit, curr_rpi_range;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+	spin_lock_irq(&phba->hbalock);
+	curr_rpi_range = phba->sli4_hba.next_rpi;
+	spin_unlock_irq(&phba->hbalock);
+
+	/*
+	 * The port has a limited number of rpis. The increment here
+	 * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+	 * and to allow the full max_rpi range per port.
+	 */
+	if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+		return NULL;
+
+	/*
+	 * First allocate the protocol header region for the port.  The
+	 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+	 */
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return NULL;
+
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  LPFC_HDR_TEMPLATE_SIZE,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		rpi_hdr = NULL;
+		goto err_free_dmabuf;
+	}
+
+	memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+	if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+		rpi_hdr = NULL;
+		goto err_free_coherent;
+	}
+
+	/* Save the rpi header data for cleanup later. */
+	rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+	if (!rpi_hdr)
+		goto err_free_coherent;
+
+	rpi_hdr->dmabuf = dmabuf;
+	rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+	rpi_hdr->page_count = 1;
+	spin_lock_irq(&phba->hbalock);
+	rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+	list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+	/*
+	 * The next_rpi stores the next module-64 rpi value to post
+	 * in any subsequent rpi memory region postings.
+	 */
+	phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+	spin_unlock_irq(&phba->hbalock);
+	return rpi_hdr;
+
+ err_free_coherent:
+	dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+			  dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+	kfree(dmabuf);
+	return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+	list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+				 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		list_del(&rpi_hdr->list);
+		dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+				  rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+		kfree(rpi_hdr->dmabuf);
+		kfree(rpi_hdr);
+	}
+
+	phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+	memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
+ * lpfc_hba_alloc - Allocate driver hba data structure for a device.
+ * @pdev: pointer to pci device data structure.
+ *
+ * This routine is invoked to allocate the driver hba data structure for an
+ * HBA device. If the allocation is successful, the phba reference to the
+ * PCI device data structure is set.
+ *
+ * Return codes
+ *      pointer to @phba - sucessful
+ *      NULL - error
+ **/
+static struct lpfc_hba *
+lpfc_hba_alloc(struct pci_dev *pdev)
+{
+	struct lpfc_hba *phba;
+
+	/* Allocate memory for HBA structure */
+	phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
+	if (!phba) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1417 Failed to allocate hba struct.\n");
+		return NULL;
+	}
+
+	/* Set reference to PCI device in HBA structure */
+	phba->pcidev = pdev;
+
+	/* Assign an unused board number */
+	phba->brd_no = lpfc_get_instance();
+	if (phba->brd_no < 0) {
+		kfree(phba);
+		return NULL;
+	}
+
+	return phba;
+}
+
+/**
+ * lpfc_hba_free - Free driver hba data structure with a device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver hba data structure with an
+ * HBA device.
+ **/
+static void
+lpfc_hba_free(struct lpfc_hba *phba)
+{
+	/* Release the driver assigned board number */
+	idr_remove(&lpfc_hba_index, phba->brd_no);
+
+	kfree(phba);
+	return;
+}
+
+/**
+ * lpfc_create_shost - Create hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create HBA physical port and associate a SCSI
+ * host with it.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      other values - error
+ **/
+static int
+lpfc_create_shost(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport;
+	struct Scsi_Host  *shost;
+
+	/* Initialize HBA FC structure */
+	phba->fc_edtov = FF_DEF_EDTOV;
+	phba->fc_ratov = FF_DEF_RATOV;
+	phba->fc_altov = FF_DEF_ALTOV;
+	phba->fc_arbtov = FF_DEF_ARBTOV;
+
+	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
+	if (!vport)
+		return -ENODEV;
+
+	shost = lpfc_shost_from_vport(vport);
+	phba->pport = vport;
+	lpfc_debugfs_initialize(vport);
+	/* Put reference to SCSI host to driver's device private data */
+	pci_set_drvdata(phba->pcidev, shost);
+
+	return 0;
+}
+
+/**
+ * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to destroy HBA physical port and the associated
+ * SCSI host.
+ **/
+static void
+lpfc_destroy_shost(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+
+	/* Destroy physical port that associated with the SCSI host */
+	destroy_port(vport);
+
+	return;
+}
+
+/**
+ * lpfc_setup_bg - Setup Block guard structures and debug areas.
+ * @phba: pointer to lpfc hba data structure.
+ * @shost: the shost to be used to detect Block guard settings.
+ *
+ * This routine sets up the local Block guard protocol settings for @shost.
+ * This routine also allocates memory for debugging bg buffers.
+ **/
+static void
+lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
+{
+	int pagecnt = 10;
+	if (lpfc_prot_mask && lpfc_prot_guard) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"1478 Registering BlockGuard with the "
+				"SCSI layer\n");
+		scsi_host_set_prot(shost, lpfc_prot_mask);
+		scsi_host_set_guard(shost, lpfc_prot_guard);
+	}
+	if (!_dump_buf_data) {
+		while (pagecnt) {
+			spin_lock_init(&_dump_buf_lock);
+			_dump_buf_data =
+				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
+			if (_dump_buf_data) {
+				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				       "_dump_buf_data at 0x%p\n",
+				       (1 << pagecnt), _dump_buf_data);
+				_dump_buf_data_order = pagecnt;
+				memset(_dump_buf_data, 0,
+				       ((1 << PAGE_SHIFT) << pagecnt));
+				break;
+			} else
+				--pagecnt;
+		}
+		if (!_dump_buf_data_order)
+			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			       "memory for hexdump\n");
+	} else
+		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+		       "\n", _dump_buf_data);
+	if (!_dump_buf_dif) {
+		while (pagecnt) {
+			_dump_buf_dif =
+				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
+			if (_dump_buf_dif) {
+				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				       "_dump_buf_dif at 0x%p\n",
+				       (1 << pagecnt), _dump_buf_dif);
+				_dump_buf_dif_order = pagecnt;
+				memset(_dump_buf_dif, 0,
+				       ((1 << PAGE_SHIFT) << pagecnt));
+				break;
+			} else
+				--pagecnt;
+		}
+		if (!_dump_buf_dif_order)
+			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			       "memory for hexdump\n");
+	} else
+		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+		       _dump_buf_dif);
+}
+
+/**
+ * lpfc_post_init_setup - Perform necessary device post initialization setup.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to perform all the necessary post initialization
+ * setup for the device.
+ **/
+static void
+lpfc_post_init_setup(struct lpfc_hba *phba)
+{
+	struct Scsi_Host  *shost;
+	struct lpfc_adapter_event_header adapter_event;
+
+	/* Get the default values for Model Name and Description */
+	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
+	/*
+	 * hba setup may have changed the hba_queue_depth so we need to
+	 * adjust the value of can_queue.
+	 */
+	shost = pci_get_drvdata(phba->pcidev);
+	shost->can_queue = phba->cfg_hba_queue_depth - 10;
+	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+		lpfc_setup_bg(phba, shost);
+
+	lpfc_host_attrib_init(shost);
+
+	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+		spin_lock_irq(shost->host_lock);
+		lpfc_poll_start_timer(phba);
+		spin_unlock_irq(shost->host_lock);
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0428 Perform SCSI scan\n");
+	/* Send board arrival event to upper layer */
+	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
+	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+				  sizeof(adapter_event),
+				  (char *) &adapter_event,
+				  LPFC_NL_VENDOR_ID);
+	return;
+}
+
+/**
+ * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-3 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar2map_len;
+	int i, hbq_count;
+	void *ptr;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of Bar0 and Bar2 and the number of bytes
+	 * required by each mapping.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, 0);
+	bar0map_len = pci_resource_len(pdev, 0);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, 2);
+	bar2map_len = pci_resource_len(pdev, 2);
+
+	/* Map HBA SLIM to a kernel virtual address. */
+	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->slim_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLIM memory.\n");
+		goto out;
+	}
+
+	/* Map HBA Control Registers to a kernel virtual address. */
+	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for HBA control registers.\n");
+		goto out_iounmap_slim;
+	}
+
+	/* Allocate memory for SLI-2 structures */
+	phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
+					       SLI2_SLIM_SIZE,
+					       &phba->slim2p.phys,
+					       GFP_KERNEL);
+	if (!phba->slim2p.virt)
+		goto out_iounmap;
+
+	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
+	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
+	phba->IOCBs = (phba->slim2p.virt +
+		       offsetof(struct lpfc_sli2_slim, IOCBs));
+
+	phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
+						 lpfc_sli_hbq_size(),
+						 &phba->hbqslimp.phys,
+						 GFP_KERNEL);
+	if (!phba->hbqslimp.virt)
+		goto out_free_slim;
+
+	hbq_count = lpfc_sli_hbq_count();
+	ptr = phba->hbqslimp.virt;
+	for (i = 0; i < hbq_count; ++i) {
+		phba->hbqs[i].hbq_virt = ptr;
+		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+		ptr += (lpfc_hbq_defs[i]->entry_count *
+			sizeof(struct lpfc_hbq_entry));
+	}
+	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
+	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
+
+	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
+
+	INIT_LIST_HEAD(&phba->rb_pend_list);
+
+	phba->MBslimaddr = phba->slim_memmap_p;
+	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+	return 0;
+
+out_free_slim:
+	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+			  phba->slim2p.virt, phba->slim2p.phys);
+out_iounmap:
+	iounmap(phba->ctrl_regs_memmap_p);
+out_iounmap_slim:
+	iounmap(phba->slim_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+			  phba->hbqslimp.virt, phba->hbqslimp.phys);
+	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+			  phba->slim2p.virt, phba->slim2p.phys);
+
+	/* I/O memory unmap */
+	iounmap(phba->ctrl_regs_memmap_p);
+	iounmap(phba->slim_memmap_p);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+	struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+	uint32_t onlnreg0, onlnreg1;
+	int i, port_error = -ENODEV;
+
+	if (!phba->sli4_hba.STAregaddr)
+		return -ENODEV;
+
+	/* With uncoverable error, log the error message and return error */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+		uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1422 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerrlo_reg.word0, uerrhi_reg.word0,
+					onlnreg0, onlnreg1);
+		}
+		return -ENODEV;
+	}
+
+	/* Wait up to 30 seconds for the SLI Port POST done and ready */
+	for (i = 0; i < 3000; i++) {
+		sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+		/* Encounter fatal POST error, break out */
+		if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+			port_error = -ENODEV;
+			break;
+		}
+		if (LPFC_POST_STAGE_ARMFW_READY ==
+		    bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+			port_error = 0;
+			break;
+		}
+		msleep(10);
+	}
+
+	if (port_error)
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"1408 Failure HBA POST Status: sta_reg=0x%x, "
+			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+			"dl=x%x, pstatus=x%x\n", sta_reg.word0,
+			bf_get(lpfc_hst_state_perr, &sta_reg),
+			bf_get(lpfc_hst_state_sfi, &sta_reg),
+			bf_get(lpfc_hst_state_nip, &sta_reg),
+			bf_get(lpfc_hst_state_ipc, &sta_reg),
+			bf_get(lpfc_hst_state_xrom, &sta_reg),
+			bf_get(lpfc_hst_state_dl, &sta_reg),
+			bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+	/* Log device information */
+	scratchpad.word0 =  readl(phba->sli4_hba.SCRATCHPADregaddr);
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+			"FeatureL1=0x%x, FeatureL2=0x%x\n",
+			bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+			bf_get(lpfc_scratchpad_slirev, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+			bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+	return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+	phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_LO;
+	phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_UERR_STATUS_HI;
+	phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE0;
+	phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_ONLINE1;
+	phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+					LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+	phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_STATE;
+	phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_ISR0;
+	phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				    LPFC_HST_IMR0;
+	phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+				     LPFC_HST_ISCR0;
+	return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+	if (vf > LPFC_VIR_FUNC_MAX)
+		return -ENODEV;
+
+	phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+	phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+	phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+	phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+	phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+				vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+	return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec.  This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs.  No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	uint32_t bmbx_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address *dma_address;
+	uint32_t pa_addr;
+	uint64_t phys_addr;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * The bootstrap mailbox region is comprised of 2 parts
+	 * plus an alignment restriction of 16 bytes.
+	 */
+	bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  bmbx_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, bmbx_size);
+
+	/*
+	 * Initialize the bootstrap mailbox pointers now so that the register
+	 * operations are simple later.  The mailbox dma address is required
+	 * to be 16-byte aligned.  Also align the virtual memory as each
+	 * maibox is copied into the bmbx mailbox region before issuing the
+	 * command to the port.
+	 */
+	phba->sli4_hba.bmbx.dmabuf = dmabuf;
+	phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+	phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+					      LPFC_ALIGN_16_BYTE);
+	phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+					      LPFC_ALIGN_16_BYTE);
+
+	/*
+	 * Set the high and low physical addresses now.  The SLI4 alignment
+	 * requirement is 16 bytes and the mailbox is posted to the port
+	 * as two 30-bit addresses.  The other data is a bit marking whether
+	 * the 30-bit address is the high or low address.
+	 * Upcast bmbx aphys to 64bits so shift instruction compiles
+	 * clean on 32 bit machines.
+	 */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+	pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+	dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_HI);
+
+	pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+	dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+					   LPFC_BMBX_BIT1_ADDR_LO);
+	return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+	dma_free_coherent(&phba->pcidev->dev,
+			  phba->sli4_hba.bmbx.bmbx_size,
+			  phba->sli4_hba.bmbx.dmabuf->virt,
+			  phba->sli4_hba.bmbx.dmabuf->phys);
+
+	kfree(phba->sli4_hba.bmbx.dmabuf);
+	memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb;
+	struct lpfc_mbx_read_config *rd_config;
+	uint32_t rc = 0;
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2011 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	lpfc_read_config(phba, pmb);
+
+	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2012 Mailbox failed , mbxCmd x%x "
+			"READ_CONFIG, mbxStatus x%x\n",
+			bf_get(lpfc_mqe_command, &pmb->u.mqe),
+			bf_get(lpfc_mqe_status, &pmb->u.mqe));
+		rc = -EIO;
+	} else {
+		rd_config = &pmb->u.mqe.un.rd_config;
+		phba->sli4_hba.max_cfg_param.max_xri =
+			bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		phba->sli4_hba.max_cfg_param.xri_base =
+			bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vpi =
+			bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vpi_base =
+			bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rpi =
+			bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.rpi_base =
+			bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_vfi =
+			bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.vfi_base =
+			bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_fcfi =
+			bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+		phba->sli4_hba.max_cfg_param.fcfi_base =
+			bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+		phba->sli4_hba.max_cfg_param.max_eq =
+			bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_rq =
+			bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_wq =
+			bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+		phba->sli4_hba.max_cfg_param.max_cq =
+			bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+		phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+		phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+		phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+		phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+		phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+		phba->max_vports = phba->max_vpi;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2003 cfg params XRI(B:%d M:%d), "
+				"VPI(B:%d M:%d) "
+				"VFI(B:%d M:%d) "
+				"RPI(B:%d M:%d) "
+				"FCFI(B:%d M:%d)\n",
+				phba->sli4_hba.max_cfg_param.xri_base,
+				phba->sli4_hba.max_cfg_param.max_xri,
+				phba->sli4_hba.max_cfg_param.vpi_base,
+				phba->sli4_hba.max_cfg_param.max_vpi,
+				phba->sli4_hba.max_cfg_param.vfi_base,
+				phba->sli4_hba.max_cfg_param.max_vfi,
+				phba->sli4_hba.max_cfg_param.rpi_base,
+				phba->sli4_hba.max_cfg_param.max_rpi,
+				phba->sli4_hba.max_cfg_param.fcfi_base,
+				phba->sli4_hba.max_cfg_param.max_fcfi);
+	}
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
+	if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+		phba->cfg_hba_queue_depth =
+				phba->sli4_hba.max_cfg_param.max_xri;
+	return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+				      HOST_ENDIAN_HIGH_WORD1};
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0492 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+	 * words to contain special data values and no other data.
+	 */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0493 SLI_CONFIG_SPECIAL mailbox failed with "
+				"status x%x\n",
+				rc);
+		rc = -EIO;
+	}
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+	struct lpfc_queue *qdesc;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int cfg_fcp_wq_count;
+	int cfg_fcp_eq_count;
+
+	/*
+	 * Sanity check for confiugred queue parameters against the run-time
+	 * device parameters
+	 */
+
+	/* Sanity check on FCP fast-path WQ parameters */
+	cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+	if (cfg_fcp_wq_count >
+	    (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+		cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+				   LPFC_SP_WQN_DEF;
+		if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2581 Not enough WQs (%d) from "
+					"the pci function for supporting "
+					"FCP WQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_wq,
+					phba->cfg_fcp_wq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2582 Not enough WQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP WQs (%d), the actual FCP WQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_wq,
+				phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+	}
+	/* The actual number of FCP work queues adopted */
+	phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+	/* Sanity check on FCP fast-path EQ parameters */
+	cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+	if (cfg_fcp_eq_count >
+	    (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+		cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+				   LPFC_SP_EQN_DEF;
+		if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2574 Not enough EQs (%d) from the "
+					"pci function for supporting FCP "
+					"EQs (%d)\n",
+					phba->sli4_hba.max_cfg_param.max_eq,
+					phba->cfg_fcp_eq_count);
+			goto out_error;
+		}
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2575 Not enough EQs (%d) from the pci "
+				"function for supporting the requested "
+				"FCP EQs (%d), the actual FCP EQs can "
+				"be supported: %d\n",
+				phba->sli4_hba.max_cfg_param.max_eq,
+				phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+	}
+	/* It does not make sense to have more EQs than WQs */
+	if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2593 The number of FCP EQs (%d) is more "
+				"than the number of FCP WQs (%d), take "
+				"the number of FCP EQs same as than of "
+				"WQs (%d)\n", cfg_fcp_eq_count,
+				phba->cfg_fcp_wq_count,
+				phba->cfg_fcp_wq_count);
+		cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+	}
+	/* The actual number of FCP event queues adopted */
+	phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+	/* The overall number of event queues used */
+	phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+	/*
+	 * Create Event Queues (EQs)
+	 */
+
+	/* Get EQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+	phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+	/* Create slow path event queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+				      phba->sli4_hba.eq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0496 Failed allocate slow-path EQ\n");
+		goto out_error;
+	}
+	phba->sli4_hba.sp_eq = qdesc;
+
+	/* Create fast-path FCP Event Queue(s) */
+	phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+			       phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2576 Failed allocate memory for fast-path "
+				"EQ record array\n");
+		goto out_free_sp_eq;
+	}
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+					      phba->sli4_hba.eq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0497 Failed allocate fast-path EQ\n");
+			goto out_free_fp_eq;
+		}
+		phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+	}
+
+	/*
+	 * Create Complete Queues (CQs)
+	 */
+
+	/* Get CQ depth from module parameter, fake the default for now */
+	phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+	phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+	/* Create slow-path Mailbox Command Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0500 Failed allocate slow-path mailbox CQ\n");
+		goto out_free_fp_eq;
+	}
+	phba->sli4_hba.mbx_cq = qdesc;
+
+	/* Create slow-path ELS Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0501 Failed allocate slow-path ELS CQ\n");
+		goto out_free_mbx_cq;
+	}
+	phba->sli4_hba.els_cq = qdesc;
+
+	/* Create slow-path Unsolicited Receive Complete Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+				      phba->sli4_hba.cq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0502 Failed allocate slow-path USOL RX CQ\n");
+		goto out_free_els_cq;
+	}
+	phba->sli4_hba.rxq_cq = qdesc;
+
+	/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+	phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_eq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2577 Failed allocate memory for fast-path "
+				"CQ record array\n");
+		goto out_free_rxq_cq;
+	}
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+					      phba->sli4_hba.cq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0499 Failed allocate fast-path FCP "
+					"CQ (%d)\n", fcp_cqidx);
+			goto out_free_fcp_cq;
+		}
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+	}
+
+	/* Create Mailbox Command Queue */
+	phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+	phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+				      phba->sli4_hba.mq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0505 Failed allocate slow-path MQ\n");
+		goto out_free_fcp_cq;
+	}
+	phba->sli4_hba.mbx_wq = qdesc;
+
+	/*
+	 * Create all the Work Queues (WQs)
+	 */
+	phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+	phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+	/* Create slow-path ELS Work Queue */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+				      phba->sli4_hba.wq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0504 Failed allocate slow-path ELS WQ\n");
+		goto out_free_mbx_wq;
+	}
+	phba->sli4_hba.els_wq = qdesc;
+
+	/* Create fast-path FCP Work Queue(s) */
+	phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+				phba->cfg_fcp_wq_count), GFP_KERNEL);
+	if (!phba->sli4_hba.fcp_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2578 Failed allocate memory for fast-path "
+				"WQ record array\n");
+		goto out_free_els_wq;
+	}
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+					      phba->sli4_hba.wq_ecount);
+		if (!qdesc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0503 Failed allocate fast-path FCP "
+					"WQ (%d)\n", fcp_wqidx);
+			goto out_free_fcp_wq;
+		}
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+	phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+	/* Create Receive Queue for header */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0506 Failed allocate receive HRQ\n");
+		goto out_free_fcp_wq;
+	}
+	phba->sli4_hba.hdr_rq = qdesc;
+
+	/* Create Receive Queue for data */
+	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+				      phba->sli4_hba.rq_ecount);
+	if (!qdesc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0507 Failed allocate receive DRQ\n");
+		goto out_free_hdr_rq;
+	}
+	phba->sli4_hba.dat_rq = qdesc;
+
+	return 0;
+
+out_free_hdr_rq:
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+		phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+		phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+		phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+	}
+	kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+out_error:
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Release mailbox command work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+	phba->sli4_hba.mbx_wq = NULL;
+
+	/* Release ELS work queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+	phba->sli4_hba.els_wq = NULL;
+
+	/* Release FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_wq);
+	phba->sli4_hba.fcp_wq = NULL;
+
+	/* Release unsolicited receive queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+	phba->sli4_hba.hdr_rq = NULL;
+	lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+	phba->sli4_hba.dat_rq = NULL;
+
+	/* Release unsolicited receive complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+	phba->sli4_hba.rxq_cq = NULL;
+
+	/* Release ELS complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+	phba->sli4_hba.els_cq = NULL;
+
+	/* Release mailbox command complete queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+	phba->sli4_hba.mbx_cq = NULL;
+
+	/* Release FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+	kfree(phba->sli4_hba.fcp_cq);
+	phba->sli4_hba.fcp_cq = NULL;
+
+	/* Release fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+	kfree(phba->sli4_hba.fp_eq);
+	phba->sli4_hba.fp_eq = NULL;
+
+	/* Release slow-path event queue */
+	lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+	phba->sli4_hba.sp_eq = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+	int rc = -ENOMEM;
+	int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+	int fcp_cq_index = 0;
+
+	/*
+	 * Set up Event Queues (EQs)
+	 */
+
+	/* Set up slow-path event queue */
+	if (!phba->sli4_hba.sp_eq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0520 Slow-path EQ not allocated\n");
+		goto out_error;
+	}
+	rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+			    LPFC_SP_DEF_IMAX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0521 Failed setup of slow-path EQ: "
+				"rc = 0x%x\n", rc);
+		goto out_error;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2583 Slow-path EQ setup: queue-id=%d\n",
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path event queue */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0522 Fast-path EQ (%d) not "
+					"allocated\n", fcp_eqidx);
+			goto out_destroy_fp_eq;
+		}
+		rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+				    phba->cfg_fcp_imax);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0523 Failed setup of fast-path EQ "
+					"(%d), rc = 0x%x\n", fcp_eqidx, rc);
+			goto out_destroy_fp_eq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2584 Fast-path EQ setup: "
+				"queue[%d]-id=%d\n", fcp_eqidx,
+				phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+	}
+
+	/*
+	 * Set up Complete Queues (CQs)
+	 */
+
+	/* Set up slow-path MBOX Complete Queue as the first CQ */
+	if (!phba->sli4_hba.mbx_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0528 Mailbox CQ not allocated\n");
+		goto out_destroy_fp_eq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+			    LPFC_MCQ, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0529 Failed setup of slow-path mailbox CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fp_eq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.mbx_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path ELS Complete Queue */
+	if (!phba->sli4_hba.els_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0530 ELS CQ not allocated\n");
+		goto out_destroy_mbx_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+			    LPFC_WCQ, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0531 Failed setup of slow-path ELS CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.els_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up slow-path Unsolicited Receive Complete Queue */
+	if (!phba->sli4_hba.rxq_cq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0532 USOL RX CQ not allocated\n");
+		goto out_destroy_els_cq;
+	}
+	rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+			    LPFC_RCQ, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0533 Failed setup of slow-path USOL RX CQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_els_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+			phba->sli4_hba.rxq_cq->queue_id,
+			phba->sli4_hba.sp_eq->queue_id);
+
+	/* Set up fast-path FCP Response Complete Queue */
+	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+		if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0526 Fast-path FCP CQ (%d) not "
+					"allocated\n", fcp_cqidx);
+			goto out_destroy_fcp_cq;
+		}
+		rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+				    phba->sli4_hba.fp_eq[fcp_cqidx],
+				    LPFC_WCQ, LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0527 Failed setup of fast-path FCP "
+					"CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+			goto out_destroy_fcp_cq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2588 FCP CQ setup: cq[%d]-id=%d, "
+				"parent eq[%d]-id=%d\n",
+				fcp_cqidx,
+				phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+				fcp_cqidx,
+				phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+	}
+
+	/*
+	 * Set up all the Work Queues (WQs)
+	 */
+
+	/* Set up Mailbox Command Queue */
+	if (!phba->sli4_hba.mbx_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0538 Slow-path MQ not allocated\n");
+		goto out_destroy_fcp_cq;
+	}
+	rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+			    phba->sli4_hba.mbx_cq, LPFC_MBOX);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0539 Failed setup of slow-path MQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_cq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.mbx_wq->queue_id,
+			phba->sli4_hba.mbx_cq->queue_id);
+
+	/* Set up slow-path ELS Work Queue */
+	if (!phba->sli4_hba.els_wq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0536 Slow-path ELS WQ not allocated\n");
+		goto out_destroy_mbx_wq;
+	}
+	rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+			    phba->sli4_hba.els_cq, LPFC_ELS);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0537 Failed setup of slow-path ELS WQ: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_mbx_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+			phba->sli4_hba.els_wq->queue_id,
+			phba->sli4_hba.els_cq->queue_id);
+
+	/* Set up fast-path FCP Work Queue */
+	for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+		if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0534 Fast-path FCP WQ (%d) not "
+					"allocated\n", fcp_wqidx);
+			goto out_destroy_fcp_wq;
+		}
+		rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+				    phba->sli4_hba.fcp_cq[fcp_cq_index],
+				    LPFC_FCP);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0535 Failed setup of fast-path FCP "
+					"WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+			goto out_destroy_fcp_wq;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2591 FCP WQ setup: wq[%d]-id=%d, "
+				"parent cq[%d]-id=%d\n",
+				fcp_wqidx,
+				phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+				fcp_cq_index,
+				phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+		/* Round robin FCP Work Queue's Completion Queue assignment */
+		fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+	}
+
+	/*
+	 * Create Receive Queue (RQ)
+	 */
+	if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0540 Receive Queue not allocated\n");
+		goto out_destroy_fcp_wq;
+	}
+	rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			    phba->sli4_hba.rxq_cq, LPFC_USOL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0541 Failed setup of Receive Queue: "
+				"rc = 0x%x\n", rc);
+		goto out_destroy_fcp_wq;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+			"parent cq-id=%d\n",
+			phba->sli4_hba.hdr_rq->queue_id,
+			phba->sli4_hba.dat_rq->queue_id,
+			phba->sli4_hba.rxq_cq->queue_id);
+	return 0;
+
+out_destroy_fcp_wq:
+	for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+	for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+	for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+	return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+	int fcp_qidx;
+
+	/* Unset mailbox command work queue */
+	lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+	/* Unset ELS work queue */
+	lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+	/* Unset unsolicited receive queue */
+	lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+	/* Unset FCP work queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+		lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+	/* Unset mailbox command complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+	/* Unset ELS complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+	/* Unset unsolicited receive complete queue */
+	lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+	/* Unset FCP response complete queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+	/* Unset fast-path event queue */
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+		lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+	/* Unset slow-path event queue */
+	lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ *   - Mailbox asynchronous events
+ *   - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	int i;
+
+	for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+		cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+		if (!cq_event)
+			goto out_pool_create_fail;
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_cqe_event_pool);
+	}
+	return 0;
+
+out_pool_create_fail:
+	lpfc_sli4_cq_event_pool_destroy(phba);
+	return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event, *next_cq_event;
+
+	list_for_each_entry_safe(cq_event, next_cq_event,
+				 &phba->sli4_hba.sp_cqe_event_pool, list) {
+		list_del(&cq_event->list);
+		kfree(cq_event);
+	}
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event = NULL;
+
+	list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+			 struct lpfc_cq_event, list);
+	return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ *         NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cq_event = __lpfc_sli4_cq_event_alloc(phba);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			     struct lpfc_cq_event *cq_event)
+{
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+			   struct lpfc_cq_event *cq_event)
+{
+	unsigned long iflags;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_sli4_cq_event_release(phba, cq_event);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cqelist);
+	struct lpfc_cq_event *cqe;
+	unsigned long iflags;
+
+	/* Retrieve all the pending WCQEs from pending WCQE lists */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Pending FCP XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending ELS XRI abort events */
+	list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+			 &cqelist);
+	/* Pending asynnc events */
+	list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+			 &cqelist);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	while (!list_empty(&cqelist)) {
+		list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+		lpfc_sli4_cq_event_release(phba, cqe);
+	}
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ *      0 - sucessful
+ *      ENOMEM - No availble memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0494 Unable to allocate memory for issuing "
+				"SLI_FUNCTION_RESET mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+			 LPFC_SLI4_MBX_EMBED);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0495 SLI_FUNCTION_RESET mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int length, cmdsent;
+	uint32_t mbox_tmo;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (cnt == 0) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2518 Requested to send 0 NOP mailbox cmd\n");
+		return cnt;
+	}
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2519 Unable to allocate memory for issuing "
+				"NOP mailbox command\n");
+		return 0;
+	}
+
+	/* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+	length = (sizeof(struct lpfc_mbx_nop) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+		if (!phba->sli4_hba.intr_enable)
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		else
+			rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+		if (rc == MBX_TIMEOUT)
+			break;
+		/* Check return status */
+		shdr = (union lpfc_sli4_cfg_shdr *)
+			&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+					 &shdr->response);
+		if (shdr_status || shdr_add_status || rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"2520 NOP mailbox command failed "
+					"status x%x add_status x%x mbx "
+					"status x%x\n", shdr_status,
+					shdr_add_status, rc);
+			break;
+		}
+	}
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+
+	return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+	LPFC_MBOXQ_t *mbox;
+	uint32_t mbox_tmo;
+	int rc;
+	unsigned long flags;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+	if (!mbox)
+		return;
+
+	lpfc_unreg_fcfi(mbox, fcfi);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2517 Unregister FCFI command failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mbox->u.mqe));
+	else {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		/* Mark the FCFI is no longer registered */
+		phba->fcf.fcf_flag &=
+			~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+	}
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+	unsigned long bar0map_len, bar1map_len, bar2map_len;
+	int error = -ENODEV;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return error;
+	else
+		pdev = phba->pcidev;
+
+	/* Set the device DMA mask size */
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+			return error;
+
+	/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+	 * number of bytes required by each mapping. They are actually
+	 * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+	 */
+	phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+	bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+	phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+	bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+	phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+	bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+	/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+	phba->sli4_hba.conf_regs_memmap_p =
+				ioremap(phba->pci_bar0_map, bar0map_len);
+	if (!phba->sli4_hba.conf_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 PCI config registers.\n");
+		goto out;
+	}
+
+	/* Map SLI4 HBA Control Register base to a kernel virtual address. */
+	phba->sli4_hba.ctrl_regs_memmap_p =
+				ioremap(phba->pci_bar1_map, bar1map_len);
+	if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA control registers.\n");
+		goto out_iounmap_conf;
+	}
+
+	/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+	phba->sli4_hba.drbl_regs_memmap_p =
+				ioremap(phba->pci_bar2_map, bar2map_len);
+	if (!phba->sli4_hba.drbl_regs_memmap_p) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "ioremap failed for SLI4 HBA doorbell registers.\n");
+		goto out_iounmap_ctrl;
+	}
+
+	/* Set up BAR0 PCI config space register memory map */
+	lpfc_sli4_bar0_register_memmap(phba);
+
+	/* Set up BAR1 register memory map */
+	lpfc_sli4_bar1_register_memmap(phba);
+
+	/* Set up BAR2 register memory map */
+	error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+	if (error)
+		goto out_iounmap_all;
+
+	return 0;
+
+out_iounmap_all:
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+	return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+	struct pci_dev *pdev;
+
+	/* Obtain PCI device reference */
+	if (!phba->pcidev)
+		return;
+	else
+		pdev = phba->pcidev;
+
+	/* Free coherent DMA memory allocated */
+
+	/* Unmap I/O memory space */
+	iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+	iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+	iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+	return;
+}
+
+/**
+ * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-3 interface specs. The kernel function pci_enable_msix() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * invoked, enables either all or nothing, depending on the current
+ * availability of PCI vector resources. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
  * later when device is unloading, the driver should always call free_irq()
  * on all MSI-X vectors it has done request_irq() on before calling
  * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
@@ -2333,7 +6029,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
  *   other values - error
  **/
 static int
-lpfc_enable_msix(struct lpfc_hba *phba)
+lpfc_sli_enable_msix(struct lpfc_hba *phba)
 {
 	int rc, i;
 	LPFC_MBOXQ_t *pmb;
@@ -2349,20 +6045,21 @@ lpfc_enable_msix(struct lpfc_hba *phba)
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"0420 PCI enable MSI-X failed (%d)\n", rc);
 		goto msi_fail_out;
-	} else
-		for (i = 0; i < LPFC_MSIX_VECTORS; i++)
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0477 MSI-X entry[%d]: vector=x%x "
-					"message=%d\n", i,
-					phba->msix_entries[i].vector,
-					phba->msix_entries[i].entry);
+	}
+	for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0477 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", i,
+				phba->msix_entries[i].vector,
+				phba->msix_entries[i].entry);
 	/*
 	 * Assign MSI-X vectors to interrupt handlers
 	 */
 
 	/* vector-0 is associated to slow-path handler */
-	rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
-			 IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	rc = request_irq(phba->msix_entries[0].vector,
+			 &lpfc_sli_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
 	if (rc) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"0421 MSI-X slow-path request_irq failed "
@@ -2371,8 +6068,9 @@ lpfc_enable_msix(struct lpfc_hba *phba)
 	}
 
 	/* vector-1 is associated to fast-path handler */
-	rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
-			 IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+	rc = request_irq(phba->msix_entries[1].vector,
+			 &lpfc_sli_fp_intr_handler, IRQF_SHARED,
+			 LPFC_FP_DRIVER_HANDLER_NAME, phba);
 
 	if (rc) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2401,7 +6099,7 @@ lpfc_enable_msix(struct lpfc_hba *phba)
 		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 				"0351 Config MSI mailbox command failed, "
 				"mbxCmd x%x, mbxStatus x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
 		goto mbx_fail_out;
 	}
 
@@ -2428,14 +6126,14 @@ msi_fail_out:
 }
 
 /**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
+ * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * MSI-X interrupt mode to device with SLI-3 interface spec.
  **/
 static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_sli_disable_msix(struct lpfc_hba *phba)
 {
 	int i;
 
@@ -2444,23 +6142,26 @@ lpfc_disable_msix(struct lpfc_hba *phba)
 		free_irq(phba->msix_entries[i].vector, phba);
 	/* Disable MSI-X */
 	pci_disable_msix(phba->pcidev);
+
+	return;
 }
 
 /**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
+ * enable the MSI vector. The device driver is responsible for calling the
+ * request_irq() to register MSI vector with a interrupt the handler, which
+ * is done in this function.
  *
  * Return codes
  * 	0 - sucessful
  * 	other values - error
  */
 static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+lpfc_sli_enable_msi(struct lpfc_hba *phba)
 {
 	int rc;
 
@@ -2474,7 +6175,7 @@ lpfc_enable_msi(struct lpfc_hba *phba)
 		return rc;
 	}
 
-	rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+	rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
 			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
 	if (rc) {
 		pci_disable_msi(phba->pcidev);
@@ -2485,17 +6186,17 @@ lpfc_enable_msi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_disable_msi - Disable MSI interrupt mode
+ * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
  */
-
 static void
-lpfc_disable_msi(struct lpfc_hba *phba)
+lpfc_sli_disable_msi(struct lpfc_hba *phba)
 {
 	free_irq(phba->pcidev->irq, phba);
 	pci_disable_msi(phba->pcidev);
@@ -2503,80 +6204,298 @@ lpfc_disable_msi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_log_intr_mode - Log the active interrupt mode
+ * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
  * @phba: pointer to lpfc hba data structure.
- * @intr_mode: active interrupt mode adopted.
  *
- * This routine it invoked to log the currently used active interrupt mode
- * to the device.
- */
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
+ * spec. Depends on the interrupt mode configured to the driver, the driver
+ * will try to fallback from the configured interrupt mode to an interrupt
+ * mode which is supported by the platform, kernel, and device in the order
+ * of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ *   0 - sucessful
+ *   other values - error
+ **/
+static uint32_t
+lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+	uint32_t intr_mode = LPFC_INTR_ERROR;
+	int retval;
+
+	if (cfg_mode == 2) {
+		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+		retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
+		if (!retval) {
+			/* Now, try to enable MSI-X interrupt mode */
+			retval = lpfc_sli_enable_msix(phba);
+			if (!retval) {
+				/* Indicate initialization to MSI-X mode */
+				phba->intr_type = MSIX;
+				intr_mode = 2;
+			}
+		}
+	}
+
+	/* Fallback to MSI if MSI-X initialization failed */
+	if (cfg_mode >= 1 && phba->intr_type == NONE) {
+		retval = lpfc_sli_enable_msi(phba);
+		if (!retval) {
+			/* Indicate initialization to MSI mode */
+			phba->intr_type = MSI;
+			intr_mode = 1;
+		}
+	}
+
+	/* Fallback to INTx if both MSI-X/MSI initalization failed */
+	if (phba->intr_type == NONE) {
+		retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
+				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+		if (!retval) {
+			/* Indicate initialization to INTx mode */
+			phba->intr_type = INTx;
+			intr_mode = 0;
+		}
+	}
+	return intr_mode;
+}
+
+/**
+ * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate the
+ * driver's interrupt handler(s) from interrupt vector(s) to device with
+ * SLI-3 interface spec. Depending on the interrupt mode, the driver will
+ * release the interrupt vector(s) for the message signaled interrupt.
+ **/
 static void
-lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+lpfc_sli_disable_intr(struct lpfc_hba *phba)
 {
-	switch (intr_mode) {
-	case 0:
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0470 Enable INTx interrupt mode.\n");
-		break;
-	case 1:
+	/* Disable the currently initialized interrupt mode */
+	if (phba->intr_type == MSIX)
+		lpfc_sli_disable_msix(phba);
+	else if (phba->intr_type == MSI)
+		lpfc_sli_disable_msi(phba);
+	else if (phba->intr_type == INTx)
+		free_irq(phba->pcidev->irq, phba);
+
+	/* Reset interrupt management states */
+	phba->intr_type = NONE;
+	phba->sli.slistat.sli_intr = 0;
+
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	/* Set up MSI-X multi-message vectors */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+		phba->sli4_hba.msix_entries[index].entry = index;
+
+	/* Configure MSI-X capability structure */
+	rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+			     phba->sli4_hba.cfg_eqn);
+	if (rc) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0481 Enabled MSI interrupt mode.\n");
-		break;
-	case 2:
+				"0484 PCI enable MSI-X failed (%d)\n", rc);
+		goto msi_fail_out;
+	}
+	/* Log MSI-X vector assignment */
+	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0480 Enabled MSI-X interrupt mode.\n");
-		break;
-	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0482 Illegal interrupt mode.\n");
-		break;
+				"0489 MSI-X entry[%d]: vector=x%x "
+				"message=%d\n", index,
+				phba->sli4_hba.msix_entries[index].vector,
+				phba->sli4_hba.msix_entries[index].entry);
+	/*
+	 * Assign MSI-X vectors to interrupt handlers
+	 */
+
+	/* The first vector must associated to slow-path handler for MQ */
+	rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+			 &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+			 LPFC_SP_DRIVER_HANDLER_NAME, phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0485 MSI-X slow-path request_irq failed "
+				"(%d)\n", rc);
+		goto msi_fail_out;
 	}
-	return;
+
+	/* The rest of the vector(s) are associated to fast-path handler(s) */
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+		phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+		rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+				 &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+				 LPFC_FP_DRIVER_HANDLER_NAME,
+				 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"0486 MSI-X fast-path (%d) "
+					"request_irq failed (%d)\n", index, rc);
+			goto cfg_fail_out;
+		}
+	}
+
+	return rc;
+
+cfg_fail_out:
+	/* free the irq already requested */
+	for (--index; index >= 1; index--)
+		free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+	/* free the irq already requested */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+	/* Unconfigure MSI-X capability structure */
+	pci_disable_msix(phba->pcidev);
+	return rc;
 }
 
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
 static void
-lpfc_stop_port(struct lpfc_hba *phba)
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
 {
-	/* Clear all interrupt enable conditions */
-	writel(0, phba->HCregaddr);
-	readl(phba->HCregaddr); /* flush */
-	/* Clear all pending interrupts */
-	writel(0xffffffff, phba->HAregaddr);
-	readl(phba->HAregaddr); /* flush */
+	int index;
 
-	/* Reset some HBA SLI setup states */
-	lpfc_stop_phba_timers(phba);
-	phba->pport->work_port_events = 0;
+	/* Free up MSI-X multi-message vectors */
+	free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+	for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+		free_irq(phba->sli4_hba.msix_entries[index].vector,
+			 &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+	/* Disable MSI-X */
+	pci_disable_msix(phba->pcidev);
+
+	return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+	int rc, index;
+
+	rc = pci_enable_msi(phba->pcidev);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0487 PCI enable MSI mode success.\n");
+	else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0488 PCI enable MSI mode failed (%d)\n", rc);
+		return rc;
+	}
+
+	rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+	if (rc) {
+		pci_disable_msi(phba->pcidev);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0490 MSI request_irq failed (%d)\n", rc);
+	}
+
+	for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+		phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+		phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+	}
+
+	return rc;
+}
 
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+	free_irq(phba->pcidev->irq, phba);
+	pci_disable_msi(phba->pcidev);
 	return;
 }
 
 /**
- * lpfc_enable_intr - Enable device interrupt
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to enable device interrupt and associate driver's
- * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
- * mode configured to the driver, the driver will try to fallback from the
- * configured interrupt mode to an interrupt mode which is supported by the
- * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
  *
  * Return codes
- *   0 - sucessful
- *   other values - error
+ * 	0 - sucessful
+ * 	other values - error
  **/
 static uint32_t
-lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 {
 	uint32_t intr_mode = LPFC_INTR_ERROR;
-	int retval;
+	int retval, index;
 
 	if (cfg_mode == 2) {
-		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
-		retval = lpfc_sli_config_port(phba, 3);
+		/* Preparation before conf_msi mbox cmd */
+		retval = 0;
 		if (!retval) {
 			/* Now, try to enable MSI-X interrupt mode */
-			retval = lpfc_enable_msix(phba);
+			retval = lpfc_sli4_enable_msix(phba);
 			if (!retval) {
 				/* Indicate initialization to MSI-X mode */
 				phba->intr_type = MSIX;
@@ -2587,7 +6506,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 
 	/* Fallback to MSI if MSI-X initialization failed */
 	if (cfg_mode >= 1 && phba->intr_type == NONE) {
-		retval = lpfc_enable_msi(phba);
+		retval = lpfc_sli4_enable_msi(phba);
 		if (!retval) {
 			/* Indicate initialization to MSI mode */
 			phba->intr_type = MSI;
@@ -2597,34 +6516,39 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 
 	/* Fallback to INTx if both MSI-X/MSI initalization failed */
 	if (phba->intr_type == NONE) {
-		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
 				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
 		if (!retval) {
 			/* Indicate initialization to INTx mode */
 			phba->intr_type = INTx;
 			intr_mode = 0;
+			for (index = 0; index < phba->cfg_fcp_eq_count;
+			     index++) {
+				phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+				phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+			}
 		}
 	}
 	return intr_mode;
 }
 
 /**
- * lpfc_disable_intr - Disable device interrupt
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to disable device interrupt and disassociate the
- * driver's interrupt handler(s) from interrupt vector(s). Depending on the
- * interrupt mode, the driver will release the interrupt vector(s) for the
- * message signaled interrupt.
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
  **/
 static void
-lpfc_disable_intr(struct lpfc_hba *phba)
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
 {
 	/* Disable the currently initialized interrupt mode */
 	if (phba->intr_type == MSIX)
-		lpfc_disable_msix(phba);
+		lpfc_sli4_disable_msix(phba);
 	else if (phba->intr_type == MSI)
-		lpfc_disable_msi(phba);
+		lpfc_sli4_disable_msi(phba);
 	else if (phba->intr_type == INTx)
 		free_irq(phba->pcidev->irq, phba);
 
@@ -2636,263 +6560,233 @@ lpfc_disable_intr(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
- * @pdev: pointer to PCI device
- * @pid: pointer to PCI device identifier
- *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
- * PCI device-specific information of the device and driver to see if the
- * driver state that it can support this kind of device. If the match is
- * successful, the driver core invokes this routine. If this routine
- * determines it can claim the HBA, it does all the initialization that it
- * needs to do to handle the HBA properly.
+ * lpfc_unset_hba - Unset SLI3 hba device initialization
+ * @phba: pointer to lpfc hba data structure.
  *
- * Return code
- *   0 - driver can claim the device
- *   negative value - driver can not claim the device
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-3 interface spec.
  **/
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+static void
+lpfc_unset_hba(struct lpfc_hba *phba)
 {
-	struct lpfc_vport *vport = NULL;
-	struct lpfc_hba   *phba;
-	struct lpfc_sli   *psli;
-	struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
-	struct Scsi_Host  *shost = NULL;
-	void *ptr;
-	unsigned long bar0map_len, bar2map_len;
-	int error = -ENODEV, retval;
-	int  i, hbq_count;
-	uint16_t iotag;
-	uint32_t cfg_mode, intr_mode;
-	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	struct lpfc_adapter_event_header adapter_event;
-
-	if (pci_enable_device_mem(pdev))
-		goto out;
-	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
-		goto out_disable_device;
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
-	phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
-	if (!phba)
-		goto out_release_regions;
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
 
-	atomic_set(&phba->fast_event_count, 0);
-	spin_lock_init(&phba->hbalock);
+	lpfc_stop_hba_timers(phba);
 
-	/* Initialize ndlp management spinlock */
-	spin_lock_init(&phba->ndlp_lock);
+	phba->pport->work_port_events = 0;
 
-	phba->pcidev = pdev;
+	lpfc_sli_hba_down(phba);
 
-	/* Assign an unused board number */
-	if ((phba->brd_no = lpfc_get_instance()) < 0)
-		goto out_free_phba;
+	lpfc_sli_brdrestart(phba);
 
-	INIT_LIST_HEAD(&phba->port_list);
-	init_waitqueue_head(&phba->wait_4_mlo_m_q);
-	/*
-	 * Get all the module params for configuring this host and then
-	 * establish the host.
-	 */
-	lpfc_get_cfgparam(phba);
-	phba->max_vpi = LPFC_MAX_VPI;
+	lpfc_sli_disable_intr(phba);
 
-	/* Initialize timers used by driver */
-	init_timer(&phba->hb_tmofunc);
-	phba->hb_tmofunc.function = lpfc_hb_timeout;
-	phba->hb_tmofunc.data = (unsigned long)phba;
+	return;
+}
 
-	psli = &phba->sli;
-	init_timer(&psli->mbox_tmo);
-	psli->mbox_tmo.function = lpfc_mbox_timeout;
-	psli->mbox_tmo.data = (unsigned long) phba;
-	init_timer(&phba->fcp_poll_timer);
-	phba->fcp_poll_timer.function = lpfc_poll_timeout;
-	phba->fcp_poll_timer.data = (unsigned long) phba;
-	init_timer(&phba->fabric_block_timer);
-	phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
-	phba->fabric_block_timer.data = (unsigned long) phba;
-	init_timer(&phba->eratt_poll);
-	phba->eratt_poll.function = lpfc_poll_eratt;
-	phba->eratt_poll.data = (unsigned long) phba;
+/**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 
-	pci_set_master(pdev);
-	pci_save_state(pdev);
-	pci_try_set_mwi(pdev);
+	spin_lock_irq(shost->host_lock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(shost->host_lock);
 
-	if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(64)) != 0)
-		if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(32)) != 0)
-			goto out_idr_remove;
+	phba->pport->work_port_events = 0;
 
-	/*
-	 * Get the bus address of Bar0 and Bar2 and the number of bytes
-	 * required by each mapping.
-	 */
-	phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
-	bar0map_len        = pci_resource_len(phba->pcidev, 0);
+	lpfc_sli4_hba_down(phba);
 
-	phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
-	bar2map_len        = pci_resource_len(phba->pcidev, 2);
+	lpfc_sli4_disable_intr(phba);
 
-	/* Map HBA SLIM to a kernel virtual address. */
-	phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
-	if (!phba->slim_memmap_p) {
-		error = -ENODEV;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for SLIM memory.\n");
-		goto out_idr_remove;
-	}
-
-	/* Map HBA Control Registers to a kernel virtual address. */
-	phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
-	if (!phba->ctrl_regs_memmap_p) {
-		error = -ENODEV;
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for HBA control registers.\n");
-		goto out_iounmap_slim;
-	}
+	return;
+}
 
-	/* Allocate memory for SLI-2 structures */
-	phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
-					       SLI2_SLIM_SIZE,
-					       &phba->slim2p.phys,
-					       GFP_KERNEL);
-	if (!phba->slim2p.virt)
-		goto out_iounmap;
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+	int wait_cnt = 0;
+	LPFC_MBOXQ_t *mboxq;
 
-	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
-	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
-	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
-	phba->IOCBs = (phba->slim2p.virt +
-		       offsetof(struct lpfc_sli2_slim, IOCBs));
+	lpfc_stop_hba_timers(phba);
+	phba->sli4_hba.intr_enable = 0;
 
-	phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
-						 lpfc_sli_hbq_size(),
-						 &phba->hbqslimp.phys,
-						 GFP_KERNEL);
-	if (!phba->hbqslimp.virt)
-		goto out_free_slim;
+	/*
+	 * Gracefully wait out the potential current outstanding asynchronous
+	 * mailbox command.
+	 */
 
-	hbq_count = lpfc_sli_hbq_count();
-	ptr = phba->hbqslimp.virt;
-	for (i = 0; i < hbq_count; ++i) {
-		phba->hbqs[i].hbq_virt = ptr;
-		INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
-		ptr += (lpfc_hbq_defs[i]->entry_count *
-			sizeof(struct lpfc_hbq_entry));
+	/* First, block any pending async mailbox command from posted */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, trying to wait it out if we can */
+	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		msleep(10);
+		if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+			break;
 	}
-	phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
-	phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer  = lpfc_els_hbq_free;
-
-	memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
-
-	INIT_LIST_HEAD(&phba->hbqbuf_in_list);
-
-	/* Initialize the SLI Layer to run with lpfc HBAs. */
-	lpfc_sli_setup(phba);
-	lpfc_sli_queue_setup(phba);
-
-	retval = lpfc_mem_alloc(phba);
-	if (retval) {
-		error = retval;
-		goto out_free_hbqslimp;
+	/* Forcefully release the outstanding mailbox command if timed out */
+	if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_lock_irq(&phba->hbalock);
+		mboxq = phba->sli.mbox_active;
+		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		__lpfc_mbox_cmpl_put(phba, mboxq);
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
+		spin_unlock_irq(&phba->hbalock);
 	}
 
-	/* Initialize and populate the iocb list per host.  */
-	INIT_LIST_HEAD(&phba->lpfc_iocb_list);
-	for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
-		iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
-		if (iocbq_entry == NULL) {
-			printk(KERN_ERR "%s: only allocated %d iocbs of "
-				"expected %d count. Unloading driver.\n",
-				__func__, i, LPFC_IOCB_LIST_CNT);
-			error = -ENOMEM;
-			goto out_free_iocbq;
-		}
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
 
-		iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
-		if (iotag == 0) {
-			kfree (iocbq_entry);
-			printk(KERN_ERR "%s: failed to allocate IOTAG. "
-			       "Unloading driver.\n",
-				__func__);
-			error = -ENOMEM;
-			goto out_free_iocbq;
-		}
+	/* Disable PCI subsystem interrupt */
+	lpfc_sli4_disable_intr(phba);
 
-		spin_lock_irq(&phba->hbalock);
-		list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
-		phba->total_iocbq_bufs++;
-		spin_unlock_irq(&phba->hbalock);
-	}
+	/* Stop kthread signal shall trigger work_done one more time */
+	kthread_stop(phba->worker_thread);
 
-	/* Initialize HBA structure */
-	phba->fc_edtov = FF_DEF_EDTOV;
-	phba->fc_ratov = FF_DEF_RATOV;
-	phba->fc_altov = FF_DEF_ALTOV;
-	phba->fc_arbtov = FF_DEF_ARBTOV;
+	/* Stop the SLI4 device port */
+	phba->pport->work_port_events = 0;
+}
 
-	INIT_LIST_HEAD(&phba->work_list);
-	phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
-	phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+/**
+ * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be called to attach a device with SLI-3 interface spec
+ * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it can
+ * support this kind of device. If the match is successful, the driver core
+ * invokes this routine. If this routine determines it can claim the HBA, it
+ * does all the initialization that it needs to do to handle the HBA properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
 
-	/* Initialize the wait queue head for the kernel thread */
-	init_waitqueue_head(&phba->work_waitq);
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
 
-	/* Startup the kernel thread for this host adapter. */
-	phba->worker_thread = kthread_run(lpfc_do_work, phba,
-				       "lpfc_worker_%d", phba->brd_no);
-	if (IS_ERR(phba->worker_thread)) {
-		error = PTR_ERR(phba->worker_thread);
-		goto out_free_iocbq;
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1401 Failed to enable pci device.\n");
+		goto out_free_phba;
 	}
 
-	/* Initialize the list of scsi buffers used by driver for scsi IO. */
-	spin_lock_init(&phba->scsi_buf_list_lock);
-	INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+	/* Set up SLI API function jump table for PCI-device group-0 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
+	if (error)
+		goto out_disable_pci_dev;
 
-	/* Initialize list of fabric iocbs */
-	INIT_LIST_HEAD(&phba->fabric_iocb_list);
+	/* Set up SLI-3 specific device PCI memory space */
+	error = lpfc_sli_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1402 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
 
-	/* Initialize list to save ELS buffers */
-	INIT_LIST_HEAD(&phba->elsbuf);
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1403 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s3;
+	}
 
-	vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
-	if (!vport)
-		goto out_kthread_stop;
+	/* Set up SLI-3 specific device driver resources */
+	error = lpfc_sli_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1404 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s3;
+	}
 
-	shost = lpfc_shost_from_vport(vport);
-	phba->pport = vport;
-	lpfc_debugfs_initialize(vport);
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1405 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s3;
+	}
 
-	pci_set_drvdata(pdev, shost);
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1406 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
 
-	phba->MBslimaddr = phba->slim_memmap_p;
-	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
-	phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
-	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
-	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1407 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
 
 	/* Configure sysfs attributes */
-	if (lpfc_alloc_sysfs_attr(vport)) {
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1476 Failed to allocate sysfs attr\n");
-		error = -ENOMEM;
-		goto out_destroy_port;
+		goto out_destroy_shost;
 	}
 
+	/* Now, trying to enable interrupt and bring up the device */
 	cfg_mode = phba->cfg_use_msi;
 	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
 		/* Configure and enable interrupt */
-		intr_mode = lpfc_enable_intr(phba, cfg_mode);
+		intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
 		if (intr_mode == LPFC_INTR_ERROR) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"0426 Failed to enable interrupt.\n");
+					"0431 Failed to enable interrupt.\n");
+			error = -ENODEV;
 			goto out_free_sysfs_attr;
 		}
-		/* HBA SLI setup */
+		/* SLI-3 HBA setup */
 		if (lpfc_sli_hba_setup(phba)) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"1477 Failed to set up hba\n");
@@ -2902,185 +6796,65 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 		/* Wait 50ms for the interrupts of previous mailbox commands */
 		msleep(50);
-		/* Check active interrupts received */
-		if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+		/* Check active interrupts on message signaled interrupts */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
 			/* Log the current active interrupt mode */
 			phba->intr_mode = intr_mode;
 			lpfc_log_intr_mode(phba, intr_mode);
 			break;
 		} else {
 			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0451 Configure interrupt mode (%d) "
+					"0447 Configure interrupt mode (%d) "
 					"failed active interrupt test.\n",
 					intr_mode);
-			if (intr_mode == 0) {
-				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-						"0479 Failed to enable "
-						"interrupt.\n");
-				error = -ENODEV;
-				goto out_remove_device;
-			}
-			/* Stop HBA SLI setups */
-			lpfc_stop_port(phba);
 			/* Disable the current interrupt mode */
-			lpfc_disable_intr(phba);
+			lpfc_sli_disable_intr(phba);
 			/* Try next level of interrupt mode */
 			cfg_mode = --intr_mode;
 		}
 	}
 
-	/*
-	 * hba setup may have changed the hba_queue_depth so we need to adjust
-	 * the value of can_queue.
-	 */
-	shost->can_queue = phba->cfg_hba_queue_depth - 10;
-	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
-
-		if (lpfc_prot_mask && lpfc_prot_guard) {
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"1478 Registering BlockGuard with the "
-					"SCSI layer\n");
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
 
-			scsi_host_set_prot(shost, lpfc_prot_mask);
-			scsi_host_set_guard(shost, lpfc_prot_guard);
-		}
-	}
-
-	if (!_dump_buf_data) {
-		int pagecnt = 10;
-		while (pagecnt) {
-			spin_lock_init(&_dump_buf_lock);
-			_dump_buf_data =
-				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
-			if (_dump_buf_data) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
-						"_dump_buf_data at 0x%p\n",
-						(1 << pagecnt), _dump_buf_data);
-				_dump_buf_data_order = pagecnt;
-				memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT)
-							   << pagecnt));
-				break;
-			} else {
-				--pagecnt;
-			}
-
-		}
-
-		if (!_dump_buf_data_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
-					"memory for hexdump\n");
-
-	} else {
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
-		       "\n", _dump_buf_data);
-	}
-
-
-	if (!_dump_buf_dif) {
-		int pagecnt = 10;
-		while (pagecnt) {
-			_dump_buf_dif =
-				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
-			if (_dump_buf_dif) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
-						"_dump_buf_dif at 0x%p\n",
-						(1 << pagecnt), _dump_buf_dif);
-				_dump_buf_dif_order = pagecnt;
-				memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT)
-							  << pagecnt));
-				break;
-			} else {
-				--pagecnt;
-			}
-
-		}
-
-		if (!_dump_buf_dif_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
-					"memory for hexdump\n");
-
-	} else {
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
-				_dump_buf_dif);
-	}
-
-	lpfc_host_attrib_init(shost);
-
-	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		spin_lock_irq(shost->host_lock);
-		lpfc_poll_start_timer(phba);
-		spin_unlock_irq(shost->host_lock);
-	}
-
-	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-			"0428 Perform SCSI scan\n");
-	/* Send board arrival event to upper layer */
-	adapter_event.event_type = FC_REG_ADAPTER_EVENT;
-	adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-		sizeof(adapter_event),
-		(char *) &adapter_event,
-		LPFC_NL_VENDOR_ID);
+	/* Check if there are static vports to be created. */
+	lpfc_create_static_vport(phba);
 
 	return 0;
 
 out_remove_device:
-	spin_lock_irq(shost->host_lock);
-	vport->load_flag |= FC_UNLOADING;
-	spin_unlock_irq(shost->host_lock);
-	lpfc_stop_phba_timers(phba);
-	phba->pport->work_port_events = 0;
-	lpfc_disable_intr(phba);
-	lpfc_sli_hba_down(phba);
-	lpfc_sli_brdrestart(phba);
+	lpfc_unset_hba(phba);
 out_free_sysfs_attr:
 	lpfc_free_sysfs_attr(vport);
-out_destroy_port:
-	destroy_port(vport);
-out_kthread_stop:
-	kthread_stop(phba->worker_thread);
-out_free_iocbq:
-	list_for_each_entry_safe(iocbq_entry, iocbq_next,
-						&phba->lpfc_iocb_list, list) {
-		kfree(iocbq_entry);
-		phba->total_iocbq_bufs--;
-	}
-	lpfc_mem_free(phba);
-out_free_hbqslimp:
-	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
-			  phba->hbqslimp.virt, phba->hbqslimp.phys);
-out_free_slim:
-	dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
-			  phba->slim2p.virt, phba->slim2p.phys);
-out_iounmap:
-	iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
-	iounmap(phba->slim_memmap_p);
-out_idr_remove:
-	idr_remove(&lpfc_hba_index, phba->brd_no);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s3:
+	lpfc_sli_driver_resource_unset(phba);
+out_unset_pci_mem_s3:
+	lpfc_sli_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
 out_free_phba:
-	kfree(phba);
-out_release_regions:
-	pci_release_selected_regions(pdev, bars);
-out_disable_device:
-	pci_disable_device(pdev);
-out:
-	pci_set_drvdata(pdev, NULL);
-	if (shost)
-		scsi_host_put(shost);
+	lpfc_hba_free(phba);
 	return error;
 }
 
 /**
- * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
+ * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
  * @pdev: pointer to PCI device
  *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
- * for the HBA device to be removed from the PCI subsystem properly.
+ * This routine is to be called to disattach a device with SLI-3 interface
+ * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
  **/
 static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
+lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host  *shost = pci_get_drvdata(pdev);
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3098,7 +6872,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	/* Release all the vports against this physical port */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
 			fc_vport_terminate(vports[i]->fc_vport);
 	lpfc_destroy_vport_work_array(phba, vports);
 
@@ -3120,7 +6894,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	/* Final cleanup of txcmplq and reset the HBA */
 	lpfc_sli_brdrestart(phba);
 
-	lpfc_stop_phba_timers(phba);
+	lpfc_stop_hba_timers(phba);
 	spin_lock_irq(&phba->hbalock);
 	list_del_init(&vport->listentry);
 	spin_unlock_irq(&phba->hbalock);
@@ -3128,7 +6902,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	lpfc_debugfs_terminate(vport);
 
 	/* Disable interrupt */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	pci_set_drvdata(pdev, NULL);
 	scsi_host_put(shost);
@@ -3138,7 +6912,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	 * corresponding pools here.
 	 */
 	lpfc_scsi_free(phba);
-	lpfc_mem_free(phba);
+	lpfc_mem_free_all(phba);
 
 	dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
 			  phba->hbqslimp.virt, phba->hbqslimp.phys);
@@ -3151,36 +6925,35 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	iounmap(phba->ctrl_regs_memmap_p);
 	iounmap(phba->slim_memmap_p);
 
-	idr_remove(&lpfc_hba_index, phba->brd_no);
-
-	kfree(phba);
+	lpfc_hba_free(phba);
 
 	pci_release_selected_regions(pdev, bars);
 	pci_disable_device(pdev);
 }
 
 /**
- * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
+ * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
  * @pdev: pointer to PCI device
  * @msg: power management message
  *
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it quiesces the
- * device by stopping the driver's worker thread for the device, turning off
- * device's interrupt and DMA, and bring the device offline. Note that as the
- * driver implements the minimum PM requirements to a power-aware driver's PM
- * support for suspend/resume -- all the possible PM messages (SUSPEND,
- * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
- * and the driver will fully reinitialize its device during resume() method
- * call, the driver will set device to PCI_D3hot state in PCI config space
- * instead of setting it according to the @msg provided by the PM.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When
+ * PM invokes this method, it quiesces the device by stopping the driver's
+ * worker thread for the device, turning off device's interrupt and DMA,
+ * and bring the device offline. Note that as the driver implements the
+ * minimum PM requirements to a power-aware driver's PM support for the
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver will
+ * fully reinitialize its device during resume() method call, the driver will
+ * set device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
  *
  * Return code
- *   0 - driver suspended the device
- *   Error otherwise
+ * 	0 - driver suspended the device
+ * 	Error otherwise
  **/
 static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3194,7 +6967,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
 	kthread_stop(phba->worker_thread);
 
 	/* Disable interrupt from device */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	/* Save device state to PCI config space */
 	pci_save_state(pdev);
@@ -3204,25 +6977,26 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
 }
 
 /**
- * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
+ * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
  * @pdev: pointer to PCI device
  *
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it restores
- * the device's PCI config space state and fully reinitializes the device
- * and brings it online. Note that as the driver implements the minimum PM
- * requirements to a power-aware driver's PM for suspend/resume -- all
- * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
- * method call will be treated as SUSPEND and the driver will fully
- * reinitialize its device during resume() method call, the device will be
- * set to PCI_D0 directly in PCI config space before restoring the state.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When PM
+ * invokes this method, it restores the device's PCI config space state and
+ * fully reinitializes the device and brings it online. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's
+ * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
+ * FREEZE) to the suspend() method call will be treated as SUSPEND and the
+ * driver will fully reinitialize its device during resume() method call,
+ * the device will be set to PCI_D0 directly in PCI config space before
+ * restoring the state.
  *
  * Return code
- *   0 - driver suspended the device
- *   Error otherwise
+ * 	0 - driver suspended the device
+ * 	Error otherwise
  **/
 static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+lpfc_pci_resume_one_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3250,7 +7024,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
 	}
 
 	/* Configure and enable interrupt */
-	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0430 PM resume Failed to enable interrupt\n");
@@ -3269,23 +7043,24 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
+ * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
  * @pdev: pointer to PCI device.
  * @state: the current PCI connection state.
  *
- * This routine is registered to the PCI subsystem for error handling. This
- * function is called by the PCI subsystem after a PCI bus error affecting
- * this device has been detected. When this function is invoked, it will
- * need to stop all the I/Os and interrupt(s) to the device. Once that is
- * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
- * perform proper recovery as desired.
+ * This routine is called from the PCI subsystem for I/O error handling to
+ * device with SLI-3 interface spec. This function is called by the PCI
+ * subsystem after a PCI bus error affecting this device has been detected.
+ * When this function is invoked, it will need to stop all the I/Os and
+ * interrupt(s) to the device. Once that is done, it will return
+ * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
+ * as desired.
  *
  * Return codes
- *   PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
- *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
  **/
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
-				pci_channel_state_t state)
+static pci_ers_result_t
+lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3312,30 +7087,32 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
 	lpfc_sli_abort_iocb_ring(phba, pring);
 
 	/* Disable interrupt */
-	lpfc_disable_intr(phba);
+	lpfc_sli_disable_intr(phba);
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
 }
 
 /**
- * lpfc_io_slot_reset - Restart a PCI device from scratch
+ * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
  * @pdev: pointer to PCI device.
  *
- * This routine is registered to the PCI subsystem for error handling. This is
- * called after PCI bus has been reset to restart the PCI card from scratch,
- * as if from a cold-boot. During the PCI subsystem error recovery, after the
- * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
- * proper error recovery and then call this routine before calling the .resume
- * method to recover the device. This function will initialize the HBA device,
- * enable the interrupt, but it will just put the HBA to offline state without
- * passing any I/O traffic.
+ * This routine is called from the PCI subsystem for error handling to
+ * device with SLI-3 interface spec. This is called after PCI bus has been
+ * reset to restart the PCI card from scratch, as if from a cold-boot.
+ * During the PCI subsystem error recovery, after driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method
+ * to recover the device. This function will initialize the HBA device,
+ * enable the interrupt, but it will just put the HBA to offline state
+ * without passing any I/O traffic.
  *
  * Return codes
- *   PCI_ERS_RESULT_RECOVERED - the device has been recovered
- *   PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
  */
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+static pci_ers_result_t
+lpfc_io_slot_reset_s3(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3354,11 +7131,11 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
 		pci_set_master(pdev);
 
 	spin_lock_irq(&phba->hbalock);
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Configure and enable interrupt */
-	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0427 Cannot re-enable interrupt after "
@@ -3378,20 +7155,713 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_io_resume - Resume PCI I/O operation
+ * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
  * @pdev: pointer to PCI device
  *
- * This routine is registered to the PCI subsystem for error handling. It is
- * called when kernel error recovery tells the lpfc driver that it is ok to
- * resume normal PCI operation after PCI bus error recovery. After this call,
- * traffic can start to flow from this device again.
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-3 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
  */
-static void lpfc_io_resume(struct pci_dev *pdev)
+static void
+lpfc_io_resume_s3(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	lpfc_online(phba);
+}
+
+/**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+	int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+	if (max_xri <= 100)
+		return 4;
+	else if (max_xri <= 256)
+		return 8;
+	else if (max_xri <= 512)
+		return 16;
+	else if (max_xri <= 1024)
+		return 32;
+	else
+		return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct lpfc_hba   *phba;
+	struct lpfc_vport *vport = NULL;
+	int error;
+	uint32_t cfg_mode, intr_mode;
+	int mcnt;
+
+	/* Allocate memory for HBA structure */
+	phba = lpfc_hba_alloc(pdev);
+	if (!phba)
+		return -ENOMEM;
+
+	/* Perform generic PCI device enabling operation */
+	error = lpfc_enable_pci_dev(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1409 Failed to enable pci device.\n");
+		goto out_free_phba;
+	}
+
+	/* Set up SLI API function jump table for PCI-device group-1 HBAs */
+	error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+	if (error)
+		goto out_disable_pci_dev;
+
+	/* Set up SLI-4 specific device PCI memory space */
+	error = lpfc_sli4_pci_mem_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1410 Failed to set up pci memory space.\n");
+		goto out_disable_pci_dev;
+	}
+
+	/* Set up phase-1 common device driver resources */
+	error = lpfc_setup_driver_resource_phase1(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1411 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Set up SLI-4 Specific device driver resources */
+	error = lpfc_sli4_driver_resource_setup(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1412 Failed to set up driver resource.\n");
+		goto out_unset_pci_mem_s4;
+	}
+
+	/* Initialize and populate the iocb list per host */
+	error = lpfc_init_iocb_list(phba,
+			phba->sli4_hba.max_cfg_param.max_xri);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1413 Failed to initialize iocb list.\n");
+		goto out_unset_driver_resource_s4;
+	}
+
+	/* Set up common device driver resources */
+	error = lpfc_setup_driver_resource_phase2(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1414 Failed to set up driver resource.\n");
+		goto out_free_iocb_list;
+	}
+
+	/* Create SCSI host to the physical port */
+	error = lpfc_create_shost(phba);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1415 Failed to create scsi host.\n");
+		goto out_unset_driver_resource;
+	}
+
+	/* Configure sysfs attributes */
+	vport = phba->pport;
+	error = lpfc_alloc_sysfs_attr(vport);
+	if (error) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1416 Failed to allocate sysfs attr\n");
+		goto out_destroy_shost;
+	}
+
+	/* Now, trying to enable interrupt and bring up the device */
+	cfg_mode = phba->cfg_use_msi;
+	while (true) {
+		/* Put device to a known state before enabling interrupt */
+		lpfc_stop_port(phba);
+		/* Configure and enable interrupt */
+		intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+		if (intr_mode == LPFC_INTR_ERROR) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0426 Failed to enable interrupt.\n");
+			error = -ENODEV;
+			goto out_free_sysfs_attr;
+		}
+		/* Set up SLI-4 HBA */
+		if (lpfc_sli4_hba_setup(phba)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1421 Failed to set up hba\n");
+			error = -ENODEV;
+			goto out_disable_intr;
+		}
+
+		/* Send NOP mbx cmds for non-INTx mode active interrupt test */
+		if (intr_mode != 0)
+			mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+							    LPFC_ACT_INTR_CNT);
+
+		/* Check active interrupts received only for MSI/MSI-X */
+		if (intr_mode == 0 ||
+		    phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+			/* Log the current active interrupt mode */
+			phba->intr_mode = intr_mode;
+			lpfc_log_intr_mode(phba, intr_mode);
+			break;
+		}
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0451 Configure interrupt mode (%d) "
+				"failed active interrupt test.\n",
+				intr_mode);
+		/* Unset the preivous SLI-4 HBA setup */
+		lpfc_sli4_unset_hba(phba);
+		/* Try next level of interrupt mode */
+		cfg_mode = --intr_mode;
+	}
+
+	/* Perform post initialization setup */
+	lpfc_post_init_setup(phba);
+
+	return 0;
+
+out_disable_intr:
+	lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+	lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+	lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+	lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+	lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+	lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+	lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+	lpfc_disable_pci_dev(phba);
+out_free_phba:
+	lpfc_hba_free(phba);
+	return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_vport **vports;
+	struct lpfc_hba *phba = vport->phba;
+	int i;
+
+	/* Mark the device unloading flag */
+	spin_lock_irq(&phba->hbalock);
+	vport->load_flag |= FC_UNLOADING;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Free the HBA sysfs attributes */
+	lpfc_free_sysfs_attr(vport);
+
+	/* Release all the vports against this physical port */
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+			fc_vport_terminate(vports[i]->fc_vport);
+	lpfc_destroy_vport_work_array(phba, vports);
+
+	/* Remove FC host and then SCSI host with the physical port */
+	fc_remove_host(shost);
+	scsi_remove_host(shost);
+
+	/* Perform cleanup on the physical port */
+	lpfc_cleanup(vport);
+
+	/*
+	 * Bring down the SLI Layer. This step disables all interrupts,
+	 * clears the rings, discards all mailbox commands, and resets
+	 * the HBA FCoE function.
+	 */
+	lpfc_debugfs_terminate(vport);
+	lpfc_sli4_hba_unset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	list_del_init(&vport->listentry);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+	 * buffers are released to their corresponding pools here.
+	 */
+	lpfc_scsi_free(phba);
+	lpfc_sli4_driver_resource_unset(phba);
+
+	/* Unmap adapter Control and Doorbell registers */
+	lpfc_sli4_pci_mem_unset(phba);
+
+	/* Release PCI resources and disable device's PCI function */
+	scsi_host_put(shost);
+	lpfc_disable_pci_dev(phba);
+
+	/* Finally, free the driver's device data structure */
+	lpfc_hba_free(phba);
+
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0298 PCI device Power Management suspend.\n");
+
+	/* Bring down the device */
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+	kthread_stop(phba->worker_thread);
+
+	/* Disable interrupt from device */
+	lpfc_sli4_disable_intr(phba);
+
+	/* Save device state to PCI config space */
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	uint32_t intr_mode;
+	int error;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0292 PCI device Power Management resume.\n");
+
+	/* Restore device state from PCI config space */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	if (pdev->is_busmaster)
+		pci_set_master(pdev);
+
+	 /* Startup the kernel thread for this host adapter. */
+	phba->worker_thread = kthread_run(lpfc_do_work, phba,
+					"lpfc_worker_%d", phba->brd_no);
+	if (IS_ERR(phba->worker_thread)) {
+		error = PTR_ERR(phba->worker_thread);
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0293 PM resume failed to start worker "
+				"thread: error=x%x.\n", error);
+		return error;
+	}
+
+	/* Configure and enable interrupt */
+	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+	if (intr_mode == LPFC_INTR_ERROR) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0294 PM resume Failed to enable interrupt\n");
+		return -EIO;
+	} else
+		phba->intr_mode = intr_mode;
+
+	/* Restart HBA and bring it online */
+	lpfc_sli_brdrestart(phba);
 	lpfc_online(phba);
+
+	/* Log the current active interrupt mode */
+	lpfc_log_intr_mode(phba, phba->intr_mode);
+
+	return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+	return;
+}
+
+/**
+ * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
+ * at PCI device-specific information of the device and driver to see if the
+ * driver state that it can support this kind of device. If the match is
+ * successful, the driver core invokes this routine. This routine dispatches
+ * the action to the proper SLI-3 or SLI-4 device probing routine, which will
+ * do all the initialization that it needs to do to handle the HBA device
+ * properly.
+ *
+ * Return code
+ * 	0 - driver can claim the device
+ * 	negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	int rc;
+	uint16_t dev_id;
+
+	if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+		return -ENODEV;
+
+	switch (dev_id) {
+	case PCI_DEVICE_ID_TIGERSHARK:
+	case PCI_DEVICE_ID_TIGERSHARK_S:
+		rc = lpfc_pci_probe_one_s4(pdev, pid);
+		break;
+	default:
+		rc = lpfc_pci_probe_one_s3(pdev, pid);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
+ * This routine dispatches the action to the proper SLI-3 or SLI-4 device
+ * remove routine, which will perform all the necessary cleanup for the
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		lpfc_pci_remove_one_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_pci_remove_one_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1424 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
+ * suspend the device.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	int rc = -ENODEV;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_pci_suspend_one_s3(pdev, msg);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_suspend_one_s4(pdev, msg);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1425 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device resume routine, which will
+ * resume the device.
+ *
+ * Return code
+ * 	0 - driver suspended the device
+ * 	Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	int rc = -ENODEV;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_pci_resume_one_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_pci_resume_one_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1426 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_error_detected - lpfc method for handling PCI I/O error
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called by the PCI subsystem after a PCI bus error affecting
+ * this device has been detected. When this routine is invoked, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device error detected handling
+ * routine, which will perform the proper error detected operation.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_io_error_detected_s3(pdev, state);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_error_detected_s4(pdev, state);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1427 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called after PCI bus has been reset to restart the PCI card
+ * from scratch, as if from a cold-boot. When this routine is invoked, it
+ * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
+ * routine, which will perform the proper device reset.
+ *
+ * Return codes
+ * 	PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * 	PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		rc = lpfc_io_slot_reset_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		rc = lpfc_io_slot_reset_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1428 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_io_resume - lpfc method for resuming PCI I/O operation
+ * @pdev: pointer to PCI device
+ *
+ * This routine is registered to the PCI subsystem for error handling. It
+ * is called when kernel error recovery tells the lpfc driver that it is
+ * OK to resume normal PCI operation after PCI bus error recovery. When
+ * this routine is invoked, it dispatches the action to the proper SLI-3
+ * or SLI-4 device io_resume routine, which will resume the device operation.
+ **/
+static void
+lpfc_io_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+	switch (phba->pci_dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		lpfc_io_resume_s3(pdev);
+		break;
+	case LPFC_PCI_DEV_OC:
+		lpfc_io_resume_s4(pdev);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1429 Invalid PCI device group: 0x%x\n",
+				phba->pci_dev_grp);
+		break;
+	}
+	return;
 }
 
 static struct pci_device_id lpfc_id_table[] = {
@@ -3469,6 +7939,10 @@ static struct pci_device_id lpfc_id_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
 		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
+		PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0 }
 };
 
@@ -3486,7 +7960,7 @@ static struct pci_driver lpfc_driver = {
 	.probe		= lpfc_pci_probe_one,
 	.remove		= __devexit_p(lpfc_pci_remove_one),
 	.suspend        = lpfc_pci_suspend_one,
-	.resume         = lpfc_pci_resume_one,
+	.resume		= lpfc_pci_resume_one,
 	.err_handler    = &lpfc_err_handler,
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 1aa85709b01..954ba57970a 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,33 +18,39 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LOG_ELS                       0x1	/* ELS events */
-#define LOG_DISCOVERY                 0x2	/* Link discovery events */
-#define LOG_MBOX                      0x4	/* Mailbox events */
-#define LOG_INIT                      0x8	/* Initialization events */
-#define LOG_LINK_EVENT                0x10	/* Link events */
-#define LOG_IP                        0x20	/* IP traffic history */
-#define LOG_FCP                       0x40	/* FCP traffic history */
-#define LOG_NODE                      0x80	/* Node table events */
-#define LOG_TEMP                      0x100	/* Temperature sensor events */
-#define LOG_BG			      0x200	/* BlockGuard events */
-#define LOG_MISC                      0x400	/* Miscellaneous events */
-#define LOG_SLI                       0x800	/* SLI events */
-#define LOG_FCP_ERROR                 0x1000	/* log errors, not underruns */
-#define LOG_LIBDFC                    0x2000	/* Libdfc events */
-#define LOG_VPORT                     0x4000	/* NPIV events */
-#define LOG_ALL_MSG                   0xffff	/* LOG all messages */
+#define LOG_ELS		0x00000001	/* ELS events */
+#define LOG_DISCOVERY	0x00000002	/* Link discovery events */
+#define LOG_MBOX	0x00000004	/* Mailbox events */
+#define LOG_INIT	0x00000008	/* Initialization events */
+#define LOG_LINK_EVENT	0x00000010	/* Link events */
+#define LOG_IP		0x00000020	/* IP traffic history */
+#define LOG_FCP		0x00000040	/* FCP traffic history */
+#define LOG_NODE	0x00000080	/* Node table events */
+#define LOG_TEMP	0x00000100	/* Temperature sensor events */
+#define LOG_BG		0x00000200	/* BlockGuard events */
+#define LOG_MISC	0x00000400	/* Miscellaneous events */
+#define LOG_SLI		0x00000800	/* SLI events */
+#define LOG_FCP_ERROR	0x00001000	/* log errors, not underruns */
+#define LOG_LIBDFC	0x00002000	/* Libdfc events */
+#define LOG_VPORT	0x00004000	/* NPIV events */
+#define LOF_SECURITY	0x00008000	/* Security events */
+#define LOG_EVENT	0x00010000	/* CT,TEMP,DUMP, logging */
+#define LOG_ALL_MSG	0xffffffff	/* LOG all messages */
 
 #define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
-	do { \
-	{ if (((mask) &(vport)->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+	{ if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '3')) \
 		dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
 			   fmt, (vport)->phba->brd_no, vport->vpi, ##arg); } \
-	} while (0)
+} while (0)
 
 #define lpfc_printf_log(phba, level, mask, fmt, arg...) \
-	do { \
-	{ if (((mask) &(phba)->pport->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+	{ uint32_t log_verbose = (phba)->pport ? \
+				 (phba)->pport->cfg_log_verbose : \
+				 (phba)->cfg_log_verbose; \
+	  if (((mask) & log_verbose) || (level[1] <= '3')) \
 		dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
-			   fmt, phba->brd_no, ##arg); } \
-	} while (0)
+			   fmt, phba->brd_no, ##arg); \
+	} \
+} while (0)
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7fc212..b9b451c0901 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -39,6 +41,44 @@
 #include "lpfc_compat.h"
 
 /**
+ * lpfc_dump_static_vport - Dump HBA's static vport information.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset for dumping vport info.
+ *
+ * The dump mailbox command provides a method for the device driver to obtain
+ * various types of information from the HBA device.
+ *
+ * This routine prepares the mailbox command for dumping list of static
+ * vports to be created.
+ **/
+void
+lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+		uint16_t offset)
+{
+	MAILBOX_t *mb;
+	void *ctx;
+
+	mb = &pmb->u.mb;
+	ctx = pmb->context2;
+
+	/* Setup to dump vport info region */
+	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+	mb->mbxCommand = MBX_DUMP_MEMORY;
+	mb->un.varDmp.cv = 1;
+	mb->un.varDmp.type = DMP_NV_PARAMS;
+	mb->un.varDmp.entry_index = offset;
+	mb->un.varDmp.region_id = DMP_REGION_VPORT;
+	mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t);
+	mb->un.varDmp.co = 0;
+	mb->un.varDmp.resp_offset = 0;
+	pmb->context2 = ctx;
+	mb->mbxOwner = OWN_HOST;
+
+	return;
+}
+
+/**
  * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -58,7 +98,7 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
 	MAILBOX_t *mb;
 	void *ctx;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	ctx = pmb->context2;
 
 	/* Setup to dump VPD region */
@@ -90,7 +130,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	MAILBOX_t *mb;
 	void *ctx;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	/* Save context so that we can restore after memset */
 	ctx = pmb->context2;
 
@@ -125,7 +165,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_READ_NV;
 	mb->mbxOwner = OWN_HOST;
@@ -151,7 +191,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_ASYNCEVT_ENABLE;
 	mb->un.varCfgAsyncEvent.ring = ring;
@@ -177,7 +217,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_HEARTBEAT;
 	mb->mbxOwner = OWN_HOST;
@@ -211,7 +251,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
 	struct lpfc_sli *psli;
 
 	psli = &phba->sli;
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	INIT_LIST_HEAD(&mp->list);
@@ -248,7 +288,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varClearLA.eventTag = phba->fc_eventTag;
@@ -275,7 +315,7 @@ void
 lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	struct lpfc_vport  *vport = phba->pport;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	/* NEW_FEATURE
@@ -321,7 +361,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 int
 lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t attentionConditions[2];
 
 	/* Sanity check */
@@ -405,7 +445,7 @@ lpfc_init_link(struct lpfc_hba * phba,
 	struct lpfc_sli *psli;
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	psli = &phba->sli;
@@ -492,7 +532,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 	struct lpfc_sli *psli;
 
 	psli = &phba->sli;
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxOwner = OWN_HOST;
@@ -515,7 +555,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 	mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
 	mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
 	mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
-	mb->un.varRdSparm.vpi = vpi;
+	mb->un.varRdSparm.vpi = vpi + phba->vpi_base;
 
 	/* save address for completion */
 	pmb->context1 = mp;
@@ -544,10 +584,12 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varUnregDID.did = did;
+	if (vpi != 0xffff)
+		vpi += phba->vpi_base;
 	mb->un.varUnregDID.vpi = vpi;
 
 	mb->mbxCommand = MBX_UNREG_D_ID;
@@ -573,7 +615,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxCommand = MBX_READ_CONFIG;
@@ -598,7 +640,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->mbxCommand = MBX_READ_LNK_STAT;
@@ -607,7 +649,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_reg_login - Prepare a mailbox command for registering remote login
+ * lpfc_reg_rpi - Prepare a mailbox command for registering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -631,17 +673,23 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
  *    1 - DMA memory allocation failed
  **/
 int
-lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
+lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 	       uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint8_t *sparam;
 	struct lpfc_dmabuf *mp;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varRegLogin.rpi = 0;
-	mb->un.varRegLogin.vpi = vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba);
+		if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
+			return 1;
+	}
+
+	mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
 	mb->un.varRegLogin.did = did;
 	mb->un.varWords[30] = flag;	/* Set flag to issue action on cmpl */
 
@@ -697,15 +745,16 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
 {
 	MAILBOX_t *mb;
 
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	mb->un.varUnregLogin.rpi = (uint16_t) rpi;
 	mb->un.varUnregLogin.rsvd1 = 0;
-	mb->un.varUnregLogin.vpi = vpi;
+	mb->un.varUnregLogin.vpi = vpi + phba->vpi_base;
 
 	mb->mbxCommand = MBX_UNREG_LOGIN;
 	mb->mbxOwner = OWN_HOST;
+
 	return;
 }
 
@@ -725,15 +774,15 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
  * This routine prepares the mailbox command for registering a virtual N_Port.
  **/
 void
-lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
-	     LPFC_MBOXQ_t *pmb)
+lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	mb->un.varRegVpi.vpi = vpi;
-	mb->un.varRegVpi.sid = sid;
+	mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
+	mb->un.varRegVpi.sid = vport->fc_myDID;
+	mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
 
 	mb->mbxCommand = MBX_REG_VPI;
 	mb->mbxOwner = OWN_HOST;
@@ -760,10 +809,10 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
 void
 lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	mb->un.varUnregVpi.vpi = vpi;
+	mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
 
 	mb->mbxCommand = MBX_UNREG_VPI;
 	mb->mbxOwner = OWN_HOST;
@@ -852,7 +901,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
 void
 lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 	mb->un.varRdRev.cv = 1;
 	mb->un.varRdRev.v3req = 1; /* Request SLI3 info */
@@ -945,7 +994,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
 		uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb)
 {
 	int i;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct config_hbq_var *hbqmb = &mb->un.varCfgHbq;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
@@ -1020,7 +1069,7 @@ void
 lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
 {
 	int i;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_sli *psli;
 	struct lpfc_sli_ring *pring;
 
@@ -1075,7 +1124,7 @@ void
 lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	dma_addr_t pdma_addr;
 	uint32_t bar_low, bar_high;
 	size_t offset;
@@ -1099,21 +1148,22 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	/* If HBA supports SLI=3 ask for it */
 
-	if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
+	if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
 		if (phba->cfg_enable_bg)
 			mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
+		mb->un.varCfgPort.cdss = 1; /* Configure Security */
 		mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
 		mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
 		mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
 		mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
 		if (phba->max_vpi && phba->cfg_enable_npiv &&
 		    phba->vpd.sli3Feat.cmv) {
-			mb->un.varCfgPort.max_vpi = phba->max_vpi;
+			mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI;
 			mb->un.varCfgPort.cmv = 1;
 		} else
 			mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
 	} else
-		phba->sli_rev = 2;
+		phba->sli_rev = LPFC_SLI_REV2;
 	mb->un.varCfgPort.sli_mode = phba->sli_rev;
 
 	/* Now setup pcb */
@@ -1245,7 +1295,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 void
 lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 {
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 
 	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
 	mb->mbxCommand = MBX_KILL_BOARD;
@@ -1305,29 +1355,98 @@ lpfc_mbox_get(struct lpfc_hba * phba)
 }
 
 /**
+ * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list
+ * @phba: pointer to lpfc hba data structure.
+ * @mbq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine put the completed mailbox command into the mailbox command
+ * complete list. This is the unlocked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
+ **/
+void
+__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
+{
+	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+}
+
+/**
  * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
  * This routine put the completed mailbox command into the mailbox command
- * complete list. This routine is called from driver interrupt handler
- * context.The mailbox complete list is used by the driver worker thread
- * to process mailbox complete callback functions outside the driver interrupt
- * handler.
+ * complete list. This is the locked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
  **/
 void
-lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
+lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
 {
 	unsigned long iflag;
 
 	/* This function expects to be called from interrupt context */
 	spin_lock_irqsave(&phba->hbalock, iflag);
-	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+	__lpfc_mbox_cmpl_put(phba, mbq);
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 	return;
 }
 
 /**
+ * lpfc_mbox_cmd_check - Check the validality of a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is to check whether a mailbox command is valid to be issued.
+ * This check will be performed by both the mailbox issue API when a client
+ * is to issue a mailbox command to the mailbox transport.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	/* Mailbox command that have a completion handler must also have a
+	 * vport specified.
+	 */
+	if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
+	    mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
+		if (!mboxq->vport) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT,
+					"1814 Mbox x%x failed, no vport\n",
+					mboxq->u.mb.mbxCommand);
+			dump_stack();
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+/**
+ * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to check whether the HBA device is ready for posting a
+ * mailbox command. It is used by the mailbox transport API at the time the
+ * to post a mailbox command to the device.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_dev_check(struct lpfc_hba *phba)
+{
+	/* If the PCI channel is in offline state, do not issue mbox */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -ENODEV;
+
+	/* If the HBA is in error state, do not issue mbox */
+	if (phba->link_state == LPFC_HBA_ERROR)
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
  * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
  * @phba: pointer to lpfc hba data structure.
  * @cmd: mailbox command code.
@@ -1350,6 +1469,475 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
 	case MBX_WRITE_WWN:     /* 0x98 */
 	case MBX_LOAD_EXP_ROM:	/* 0x9C */
 		return LPFC_MBOX_TMO_FLASH_CMD;
+	case MBX_SLI4_CONFIG:	/* 0x9b */
+		return LPFC_MBOX_SLI4_CONFIG_TMO;
 	}
 	return LPFC_MBOX_TMO;
 }
+
+/**
+ * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ * @phyaddr: physical address for the sge
+ * @length: Length of the sge.
+ *
+ * This routine sets up an entry in the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry,
+		      dma_addr_t phyaddr, uint32_t length)
+{
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+	nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+				&mbox->u.mqe.un.nembed_cmd;
+	nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr);
+	nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr);
+	nembed_sge->sge[sgentry].length = length;
+}
+
+/**
+ * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ *
+ * This routine gets an entry from the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry,
+		      struct lpfc_mbx_sge *sge)
+{
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+	nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+				&mbox->u.mqe.un.nembed_cmd;
+	sge->pa_lo = nembed_sge->sge[sgentry].pa_lo;
+	sge->pa_hi = nembed_sge->sge[sgentry].pa_hi;
+	sge->length = nembed_sge->sge[sgentry].length;
+}
+
+/**
+ * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine frees SLI4 specific mailbox command for sending IOCTL command.
+ **/
+void
+lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_config *sli4_cfg;
+	struct lpfc_mbx_sge sge;
+	dma_addr_t phyaddr;
+	uint32_t sgecount, sgentry;
+
+	sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+	/* For embedded mbox command, just free the mbox command */
+	if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+
+	/* For non-embedded mbox command, we need to free the pages first */
+	sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr);
+	/* There is nothing we can do if there is no sge address array */
+	if (unlikely(!mbox->sge_array)) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return;
+	}
+	/* Each non-embedded DMA memory was allocated in the length of a page */
+	for (sgentry = 0; sgentry < sgecount; sgentry++) {
+		lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge);
+		phyaddr = getPaddr(sge.pa_hi, sge.pa_lo);
+		dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE,
+				  mbox->sge_array->addr[sgentry], phyaddr);
+	}
+	/* Free the sge address array memory */
+	kfree(mbox->sge_array);
+	/* Finally, free the mailbox command itself */
+	mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_config - Initialize the  SLI4 Config Mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ * @subsystem: The sli4 config sub mailbox subsystem.
+ * @opcode: The sli4 config sub mailbox command opcode.
+ * @length: Length of the sli4 config mailbox command.
+ *
+ * This routine sets up the header fields of SLI4 specific mailbox command
+ * for sending IOCTL command.
+ *
+ * Return: the actual length of the mbox command allocated (mostly useful
+ *         for none embedded mailbox command).
+ **/
+int
+lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
+		 uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb)
+{
+	struct lpfc_mbx_sli4_config *sli4_config;
+	union lpfc_sli4_cfg_shdr *cfg_shdr = NULL;
+	uint32_t alloc_len;
+	uint32_t resid_len;
+	uint32_t pagen, pcount;
+	void *viraddr;
+	dma_addr_t phyaddr;
+
+	/* Set up SLI4 mailbox command header fields */
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG);
+
+	/* Set up SLI4 ioctl command header fields */
+	sli4_config = &mbox->u.mqe.un.sli4_config;
+
+	/* Setup for the embedded mbox command */
+	if (emb) {
+		/* Set up main header fields */
+		bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
+		sli4_config->header.cfg_mhdr.payload_length =
+					LPFC_MBX_CMD_HDR_LENGTH + length;
+		/* Set up sub-header fields following main header */
+		bf_set(lpfc_mbox_hdr_opcode,
+			&sli4_config->header.cfg_shdr.request, opcode);
+		bf_set(lpfc_mbox_hdr_subsystem,
+			&sli4_config->header.cfg_shdr.request, subsystem);
+		sli4_config->header.cfg_shdr.request.request_length = length;
+		return length;
+	}
+
+	/* Setup for the none-embedded mbox command */
+	pcount = (PAGE_ALIGN(length))/PAGE_SIZE;
+	pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
+				LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
+	/* Allocate record for keeping SGE virtual addresses */
+	mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
+				  GFP_KERNEL);
+	if (!mbox->sge_array)
+		return 0;
+
+	for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
+		/* The DMA memory is always allocated in the length of a
+		 * page even though the last SGE might not fill up to a
+		 * page, this is used as a priori size of PAGE_SIZE for
+		 * the later DMA memory free.
+		 */
+		viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE,
+					     &phyaddr, GFP_KERNEL);
+		/* In case of malloc fails, proceed with whatever we have */
+		if (!viraddr)
+			break;
+		mbox->sge_array->addr[pagen] = viraddr;
+		/* Keep the first page for later sub-header construction */
+		if (pagen == 0)
+			cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr;
+		resid_len = length - alloc_len;
+		if (resid_len > PAGE_SIZE) {
+			lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+					      PAGE_SIZE);
+			alloc_len += PAGE_SIZE;
+		} else {
+			lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+					      resid_len);
+			alloc_len = length;
+		}
+	}
+
+	/* Set up main header fields in mailbox command */
+	sli4_config->header.cfg_mhdr.payload_length = alloc_len;
+	bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen);
+
+	/* Set up sub-header fields into the first page */
+	if (pagen > 0) {
+		bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode);
+		bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem);
+		cfg_shdr->request.request_length =
+				alloc_len - sizeof(union  lpfc_sli4_cfg_shdr);
+	}
+	/* The sub-header is in DMA memory, which needs endian converstion */
+	lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+			      sizeof(union  lpfc_sli4_cfg_shdr));
+
+	return alloc_len;
+}
+
+/**
+ * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine gets the opcode from a SLI4 specific mailbox command for
+ * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
+ * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * returned.
+ **/
+uint8_t
+lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_sli4_config *sli4_cfg;
+	union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+	if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+		return 0;
+	sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+	/* For embedded mbox command, get opcode from embedded sub-header*/
+	if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+		cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+		return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+	}
+
+	/* For non-embedded mbox command, get opcode from first dma page */
+	if (unlikely(!mbox->sge_array))
+		return 0;
+	cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+	return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
+ * @mboxq: pointer to lpfc mbox command.
+ *
+ * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES
+ * mailbox command.
+ **/
+void
+lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
+{
+	/* Set up SLI4 mailbox command header fields */
+	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+	bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS);
+
+	/* Set up host requested features. */
+	bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	/* Virtual fabrics and FIPs are not supported yet. */
+	bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+
+	/* Enable DIF (block guard) only if configured to do so. */
+	if (phba->cfg_enable_bg)
+		bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	/* Enable NPIV only if configured to do so. */
+	if (phba->max_vpi && phba->cfg_enable_npiv)
+		bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1);
+
+	return;
+}
+
+/**
+ * lpfc_init_vfi - Initialize the INIT_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: Vport associated with the VF.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI
+ * in the context of an FCF. The driver issues this command to setup a VFI
+ * before issuing a FLOGI to login to the VSAN. The driver should also issue a
+ * REG_VFI after a successful VSAN login.
+ **/
+void
+lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
+{
+	struct lpfc_mbx_init_vfi *init_vfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	init_vfi = &mbox->u.mqe.un.init_vfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
+	bf_set(lpfc_init_vfi_vr, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
+}
+
+/**
+ * lpfc_reg_vfi - Initialize the REG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: vport associated with the VF.
+ * @phys: BDE DMA bus address used to send the service parameters to the HBA.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport, and uses @buf as a DMAable buffer to send the vport's
+ * fc service parameters to the HBA for this VFI. REG_VFI configures virtual
+ * fabrics identified by VFI in the context of an FCF.
+ **/
+void
+lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
+{
+	struct lpfc_mbx_reg_vfi *reg_vfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	reg_vfi = &mbox->u.mqe.un.reg_vfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI);
+	bf_set(lpfc_reg_vfi_vp, reg_vfi, 1);
+	bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
+	bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+	reg_vfi->bde.addrHigh = putPaddrHigh(phys);
+	reg_vfi->bde.addrLow = putPaddrLow(phys);
+	reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
+	reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+	bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID);
+}
+
+/**
+ * lpfc_init_vpi - Initialize the INIT_VPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vpi: VPI to be initialized.
+ *
+ * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the
+ * command to activate a virtual N_Port. The HBA assigns a MAC address to use
+ * with the virtual N Port.  The SLI Host issues this command before issuing a
+ * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a
+ * successful virtual NPort login.
+ **/
+void
+lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI);
+	bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi);
+}
+
+/**
+ * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vfi: VFI to be unregistered.
+ *
+ * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
+ * (logical NPort) into the inactive state. The SLI Host must have logged out
+ * and unregistered all remote N_Ports to abort any activity on the virtual
+ * fabric. The SLI Port posts the mailbox response after marking the virtual
+ * fabric inactive.
+ **/
+void
+lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
+	bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
+}
+
+/**
+ * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters.
+ * @phba: pointer to the hba structure containing.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * This function create a SLI4 dump mailbox command to dump FCoE
+ * parameters stored in region 23.
+ **/
+int
+lpfc_dump_fcoe_param(struct lpfc_hba *phba,
+		struct lpfcMboxq *mbox)
+{
+	struct lpfc_dmabuf *mp = NULL;
+	MAILBOX_t *mb;
+
+	memset(mbox, 0, sizeof(*mbox));
+	mb = &mbox->u.mb;
+
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (mp)
+		mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+
+	if (!mp || !mp->virt) {
+		kfree(mp);
+		/* dump_fcoe_param failed to allocate memory */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+			"2569 lpfc_dump_fcoe_param: memory"
+			" allocation failed \n");
+		return 1;
+	}
+
+	memset(mp->virt, 0, LPFC_BPL_SIZE);
+	INIT_LIST_HEAD(&mp->list);
+
+	/* save address for completion */
+	mbox->context1 = (uint8_t *) mp;
+
+	mb->mbxCommand = MBX_DUMP_MEMORY;
+	mb->un.varDmp.type = DMP_NV_PARAMS;
+	mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
+	mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+	mb->un.varWords[3] = putPaddrLow(mp->phys);
+	mb->un.varWords[4] = putPaddrHigh(mp->phys);
+	return 0;
+}
+
+/**
+ * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
+ * @phba: pointer to the hba structure containing the FCF index and RQ ID.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The
+ * SLI Host uses the command to activate an FCF after it has acquired FCF
+ * information via a READ_FCF mailbox command. This mailbox command also is used
+ * to indicate where received unsolicited frames from this FCF will be sent. By
+ * default this routine will set up the FCF to forward all unsolicited frames
+ * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * more complicated setups.
+ **/
+void
+lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_mbx_reg_fcfi *reg_fcfi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	reg_fcfi = &mbox->u.mqe.un.reg_fcfi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI);
+	bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id);
+	bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
+	bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+	/* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
+	bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
+		(~phba->fcf.addr_mode) & 0x3);
+	if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+		bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
+		bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+	}
+}
+
+/**
+ * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @fcfi: FCFI to be unregistered.
+ *
+ * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs).
+ * The SLI Host uses the command to inactivate an FCFI.
+ **/
+void
+lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi)
+{
+	memset(mbox, 0, sizeof(*mbox));
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI);
+	bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi);
+}
+
+/**
+ * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @ndlp: The nodelist structure that describes the RPI to resume.
+ *
+ * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a
+ * link event.
+ **/
+void
+lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
+{
+	struct lpfc_mbx_resume_rpi *resume_rpi;
+
+	memset(mbox, 0, sizeof(*mbox));
+	resume_rpi = &mbox->u.mqe.un.resume_rpi;
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
+	bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi);
+	bf_set(lpfc_resume_rpi_vpi, resume_rpi,
+	       ndlp->vport->vpi + ndlp->vport->phba->vpi_base);
+	bf_set(lpfc_resume_rpi_vfi, resume_rpi,
+	       ndlp->vport->vfi + ndlp->vport->phba->vfi_base);
+}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a97673339..e198c917c13 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
  * @phba: HBA to allocate pools for
  *
  * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool.  Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool.  Creates and allocates kmalloc-backed mempools
  * for LPFC_MBOXQ_t and lpfc_nodelist.  Also allocates the VPI bitmask.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.  If any
@@ -56,19 +58,30 @@
  *   -ENOMEM on failure (if any memory allocations fail)
  **/
 int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
 {
 	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 	int longs;
 	int i;
 
-	phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
-				phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev,
+				phba->cfg_sg_dma_buf_size,
+				phba->cfg_sg_dma_buf_size,
+				0);
+	else
+		phba->lpfc_scsi_dma_buf_pool =
+			pci_pool_create("lpfc_scsi_dma_buf_pool",
+				phba->pcidev, phba->cfg_sg_dma_buf_size,
+				align, 0);
 	if (!phba->lpfc_scsi_dma_buf_pool)
 		goto fail;
 
 	phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
-							LPFC_BPL_SIZE, 8,0);
+							LPFC_BPL_SIZE,
+							align, 0);
 	if (!phba->lpfc_mbuf_pool)
 		goto fail_free_dma_buf_pool;
 
@@ -97,23 +110,31 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 						sizeof(struct lpfc_nodelist));
 	if (!phba->nlp_mem_pool)
 		goto fail_free_mbox_pool;
-
-	phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
-					      LPFC_BPL_SIZE, 8, 0);
-	if (!phba->lpfc_hbq_pool)
+	phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+					      phba->pcidev,
+					      LPFC_HDR_BUF_SIZE, align, 0);
+	if (!phba->lpfc_hrb_pool)
 		goto fail_free_nlp_mem_pool;
+	phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+					      phba->pcidev,
+					      LPFC_DATA_BUF_SIZE, align, 0);
+	if (!phba->lpfc_drb_pool)
+		goto fail_free_hbq_pool;
 
 	/* vpi zero is reserved for the physical port so add 1 to max */
 	longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
 	phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
 	if (!phba->vpi_bmask)
-		goto fail_free_hbq_pool;
+		goto fail_free_dbq_pool;
 
 	return 0;
 
+ fail_free_dbq_pool:
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
  fail_free_hbq_pool:
-	lpfc_sli_hbqbuf_free_all(phba);
-	pci_pool_destroy(phba->lpfc_hbq_pool);
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
  fail_free_nlp_mem_pool:
 	mempool_destroy(phba->nlp_mem_pool);
 	phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
  * @phba: HBA to free memory for
  *
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool.  Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist.  Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
  *
  * Returns: None
  **/
 void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
 {
-	struct lpfc_sli *psli = &phba->sli;
-	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
-	LPFC_MBOXQ_t *mbox, *next_mbox;
-	struct lpfc_dmabuf   *mp;
 	int i;
+	struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
 
+	/* Free VPI bitmask memory */
 	kfree(phba->vpi_bmask);
+
+	/* Free HBQ pools */
 	lpfc_sli_hbqbuf_free_all(phba);
+	pci_pool_destroy(phba->lpfc_drb_pool);
+	phba->lpfc_drb_pool = NULL;
+	pci_pool_destroy(phba->lpfc_hrb_pool);
+	phba->lpfc_hrb_pool = NULL;
+
+	/* Free NLP memory pool */
+	mempool_destroy(phba->nlp_mem_pool);
+	phba->nlp_mem_pool = NULL;
+
+	/* Free mbox memory pool */
+	mempool_destroy(phba->mbox_mem_pool);
+	phba->mbox_mem_pool = NULL;
+
+	/* Free MBUF memory pool */
+	for (i = 0; i < pool->current_count; i++)
+		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+			      pool->elements[i].phys);
+	kfree(pool->elements);
+
+	pci_pool_destroy(phba->lpfc_mbuf_pool);
+	phba->lpfc_mbuf_pool = NULL;
 
+	/* Free DMA buffer memory pool */
+	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+	phba->lpfc_scsi_dma_buf_pool = NULL;
+
+	return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mbox, *next_mbox;
+	struct lpfc_dmabuf   *mp;
+
+	/* Free memory used in mailbox queue back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -166,6 +233,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
+	/* Free memory used in mailbox cmpl list back to mailbox memory pool */
 	list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
 		if (mp) {
@@ -175,8 +243,10 @@ lpfc_mem_free(struct lpfc_hba * phba)
 		list_del(&mbox->list);
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
-
+	/* Free the active mailbox command back to the mailbox memory pool */
+	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 	if (psli->mbox_active) {
 		mbox = psli->mbox_active;
 		mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@ lpfc_mem_free(struct lpfc_hba * phba)
 		psli->mbox_active = NULL;
 	}
 
-	for (i = 0; i < pool->current_count; i++)
-		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
-						 pool->elements[i].phys);
-	kfree(pool->elements);
-
-	pci_pool_destroy(phba->lpfc_hbq_pool);
-	mempool_destroy(phba->nlp_mem_pool);
-	mempool_destroy(phba->mbox_mem_pool);
-
-	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
-	pci_pool_destroy(phba->lpfc_mbuf_pool);
-
-	phba->lpfc_hbq_pool = NULL;
-	phba->nlp_mem_pool = NULL;
-	phba->mbox_mem_pool = NULL;
-	phba->lpfc_scsi_dma_buf_pool = NULL;
-	phba->lpfc_mbuf_pool = NULL;
+	/* Free and destroy all the allocated memory pools */
+	lpfc_mem_free(phba);
 
 	/* Free the iocb lookup array */
 	kfree(psli->iocbq_lookup);
 	psli->iocbq_lookup = NULL;
+
+	return;
 }
 
 /**
@@ -305,7 +362,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
  * lpfc_els_hbq_alloc - Allocate an HBQ buffer
  * @phba: HBA to allocate HBQ buffer for
  *
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
  * pool along a non-DMA-mapped container for it.
  *
  * Notes: Not interrupt-safe.  Must be called with no locks held.
@@ -323,7 +380,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 	if (!hbqbp)
 		return NULL;
 
-	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+	hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
 					  &hbqbp->dbuf.phys);
 	if (!hbqbp->dbuf.virt) {
 		kfree(hbqbp);
@@ -334,7 +391,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
  * @phba: HBA buffer was allocated for
  * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
  *
@@ -348,12 +405,73 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 void
 lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
 {
-	pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+	pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
 	kfree(hbqbp);
 	return;
 }
 
 /**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe.  Must be called with no locks held.
+ *
+ * Returns:
+ *   pointer to HBQ on success
+ *   NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+	struct hbq_dmabuf *dma_buf;
+
+	dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+	if (!dma_buf)
+		return NULL;
+
+	dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+					    &dma_buf->hbuf.phys);
+	if (!dma_buf->hbuf.virt) {
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+					    &dma_buf->dbuf.phys);
+	if (!dma_buf->dbuf.virt) {
+		pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+			      dma_buf->hbuf.phys);
+		kfree(dma_buf);
+		return NULL;
+	}
+	dma_buf->size = LPFC_BPL_SIZE;
+	return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+	pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+	pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+	kfree(dmab);
+	return;
+}
+
+/**
  * lpfc_in_buf_free - Free a DMA buffer
  * @phba: HBA buffer is associated with
  * @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77af41..09f659f77bb 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
  /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -361,7 +363,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!mbox)
 		goto out;
 
-	rc = lpfc_reg_login(phba, vport->vpi, icmd->un.rcvels.remoteID,
+	rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
 			    (uint8_t *) sp, mbox, 0);
 	if (rc) {
 		mempool_free(mbox, phba->mbox_mem_pool);
@@ -495,11 +497,19 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
 	else
 		lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+	if ((ndlp->nlp_type & NLP_FABRIC) &&
+		vport->port_type == LPFC_NPIV_PORT) {
+		lpfc_linkdown_port(vport);
+		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
+		spin_lock_irq(shost->host_lock);
+		ndlp->nlp_flag |= NLP_DELAY_TMO;
+		spin_unlock_irq(shost->host_lock);
 
-	if ((!(ndlp->nlp_type & NLP_FABRIC) &&
-	     ((ndlp->nlp_type & NLP_FCP_TARGET) ||
-	      !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
-	    (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
+		ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
+	} else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
+		((ndlp->nlp_type & NLP_FCP_TARGET) ||
+		!(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
+		(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
 		/* Only try to re-login if this is NOT a Fabric Node */
 		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
 		spin_lock_irq(shost->host_lock);
@@ -567,7 +577,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
-	if (!ndlp->nlp_rpi) {
+	if (!(ndlp->nlp_flag & NLP_RPI_VALID)) {
 		ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 		return 0;
 	}
@@ -857,7 +867,7 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport,
 
 	lpfc_unreg_rpi(vport, ndlp);
 
-	if (lpfc_reg_login(phba, vport->vpi, irsp->un.elsreq64.remoteID,
+	if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
 			   (uint8_t *) sp, mbox, 0) == 0) {
 		switch (ndlp->nlp_DID) {
 		case NameServer_DID:
@@ -1068,6 +1078,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
 	IOCB_t *irsp;
 	ADISC *ap;
+	int rc;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
@@ -1093,6 +1104,15 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 		return ndlp->nlp_state;
 	}
 
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_resume_rpi(ndlp);
+		if (rc) {
+			/* Stay in state and retry. */
+			ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
+			return ndlp->nlp_state;
+		}
+	}
+
 	if (ndlp->nlp_type & NLP_FCP_TARGET) {
 		ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
@@ -1100,6 +1120,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 		ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 	}
+
 	return ndlp->nlp_state;
 }
 
@@ -1190,7 +1211,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 
 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
 	if ((mb = phba->sli.mbox_active)) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			lpfc_nlp_put(ndlp);
 			mb->context2 = NULL;
@@ -1200,7 +1221,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
-		if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
@@ -1251,7 +1272,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t *mb = &pmb->mb;
+	MAILBOX_t *mb = &pmb->u.mb;
 	uint32_t did  = mb->un.varWords[1];
 
 	if (mb->mbxStatus) {
@@ -1283,6 +1304,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
+	ndlp->nlp_flag |= NLP_RPI_VALID;
 
 	/* Only if we are not a fabric nport do we issue PRLI */
 	if (!(ndlp->nlp_type & NLP_FABRIC)) {
@@ -1878,11 +1900,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport,
 			    void *arg, uint32_t evt)
 {
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t    *mb = &pmb->mb;
+	MAILBOX_t    *mb = &pmb->u.mb;
 
-	if (!mb->mbxStatus)
+	if (!mb->mbxStatus) {
 		ndlp->nlp_rpi = mb->un.varWords[0];
-	else {
+		ndlp->nlp_flag |= NLP_RPI_VALID;
+	} else {
 		if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
 			lpfc_drop_node(vport, ndlp);
 			return NLP_STE_FREED_NODE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 167b66dd34c..7991ba1980a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -31,8 +31,10 @@
 #include <scsi/scsi_transport_fc.h>
 
 #include "lpfc_version.h"
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -57,6 +59,8 @@ static char *dif_op_str[] = {
 	"SCSI_PROT_READ_CONVERT",
 	"SCSI_PROT_WRITE_CONVERT"
 };
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
 
 static void
 lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -325,7 +329,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				new_queue_depth =
@@ -379,7 +383,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				if (vports[i]->cfg_lun_queue_depth <=
@@ -427,7 +431,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			shost = lpfc_shost_from_vport(vports[i]);
 			shost_for_each_device(sdev, shost) {
 				rport = starget_to_rport(scsi_target(sdev));
@@ -438,22 +442,23 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
  * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
  *
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O.  The non-DMAable buffer region
- * contains information to build the IOCB.  The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL.  In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
  *
  * Return codes:
- *   NULL - Error
- *   Pointer to lpfc_scsi_buf data structure - Success
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
  **/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 {
 	struct lpfc_hba *phba = vport->phba;
 	struct lpfc_scsi_buf *psb;
@@ -463,107 +468,401 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
 	dma_addr_t pdma_phys_fcp_rsp;
 	dma_addr_t pdma_phys_bpl;
 	uint16_t iotag;
+	int bcnt;
 
-	psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
-	if (!psb)
-		return NULL;
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
+
+		/*
+		 * Get memory from the pci pool to map the virt space to pci
+		 * bus space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+					GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
+
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+					psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+		psb->fcp_cmnd = psb->data;
+		psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+		psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
+			sizeof(struct fcp_rsp);
+
+		/* Initialize local short-hand pointers. */
+		bpl = psb->fcp_bpl;
+		pdma_phys_fcp_cmd = psb->dma_handle;
+		pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+		pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+			sizeof(struct fcp_rsp);
+
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+		bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+		bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+		bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+
+		/* Setup the physical region for the FCP RSP */
+		bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+		bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+		bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+		bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+		bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		if ((phba->sli_rev == 3) &&
+				!(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+			/* fill in immediate fcp command BDE */
+			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+			iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+			iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+					unsli3.fcp_ext.icd);
+			iocb->un.fcpi64.bdl.addrHigh = 0;
+			iocb->ulpBdeCount = 0;
+			iocb->ulpLe = 0;
+			/* fill in responce BDE */
+			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+							BUFF_TYPE_BDE_64;
+			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+				sizeof(struct fcp_rsp);
+			iocb->unsli3.fcp_ext.rbde.addrLow =
+				putPaddrLow(pdma_phys_fcp_rsp);
+			iocb->unsli3.fcp_ext.rbde.addrHigh =
+				putPaddrHigh(pdma_phys_fcp_rsp);
+		} else {
+			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+			iocb->un.fcpi64.bdl.bdeSize =
+					(2 * sizeof(struct ulp_bde64));
+			iocb->un.fcpi64.bdl.addrLow =
+					putPaddrLow(pdma_phys_bpl);
+			iocb->un.fcpi64.bdl.addrHigh =
+					putPaddrHigh(pdma_phys_bpl);
+			iocb->ulpBdeCount = 1;
+			iocb->ulpLe = 1;
+		}
+		iocb->ulpClass = CLASS3;
+		psb->status = IOSTAT_SUCCESS;
+		/* Put it back into the SCSI buffer list */
+		lpfc_release_scsi_buf_s4(phba, psb);
 
-	/*
-	 * Get memory from the pci pool to map the virt space to pci bus space
-	 * for an I/O.  The DMA buffer includes space for the struct fcp_cmnd,
-	 * struct fcp_rsp and the number of bde's necessary to support the
-	 * sg_tablesize.
-	 */
-	psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
-							&psb->dma_handle);
-	if (!psb->data) {
-		kfree(psb);
-		return NULL;
 	}
 
-	/* Initialize virtual ptrs to dma_buf region. */
-	memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+	return bcnt;
+}
 
-	/* Allocate iotag for psb->cur_iocbq. */
-	iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
-	if (iotag == 0) {
-		pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
-			      psb->data, psb->dma_handle);
-		kfree (psb);
-		return NULL;
+/**
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+			  struct sli4_wcqe_xri_aborted *axri)
+{
+	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	struct lpfc_scsi_buf *psb, *next_psb;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+	list_for_each_entry_safe(psb, next_psb,
+		&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+		if (psb->cur_iocbq.sli4_xritag == xri) {
+			list_del(&psb->list);
+			psb->status = IOSTAT_SUCCESS;
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+			lpfc_release_scsi_buf_s4(phba, psb);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+				iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_scsi_buf *psb;
+	int index, status, bcnt = 0, rcnt = 0, rc = 0;
+	LIST_HEAD(sblist);
+
+	for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+		psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+		if (psb) {
+			/* Remove from SCSI buffer list */
+			list_del(&psb->list);
+			/* Add it to a local SCSI buffer list */
+			list_add_tail(&psb->list, &sblist);
+			if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				bcnt = rcnt;
+				rcnt = 0;
+			}
+		} else
+			/* A hole present in the XRI array, need to skip */
+			bcnt = rcnt;
+
+		if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+			/* End of XRI array for SCSI buffer, complete */
+			bcnt = rcnt;
+
+		/* Continue until collect up to a nembed page worth of sgls */
+		if (bcnt == 0)
+			continue;
+		/* Now, post the SCSI buffer list sgls as a block */
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		bcnt = 0;
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+					 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
 	}
-	psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+	return rc;
+}
 
-	psb->fcp_cmnd = psb->data;
-	psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
-	psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
-							sizeof(struct fcp_rsp);
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_scsi_buf *psb;
+	struct sli4_sge *sgl;
+	IOCB_t *iocb;
+	dma_addr_t pdma_phys_fcp_cmd;
+	dma_addr_t pdma_phys_fcp_rsp;
+	dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+	uint16_t iotag, last_xritag = NO_XRI;
+	int status = 0, index;
+	int bcnt;
+	int non_sequential_xri = 0;
+	int rc = 0;
+	LIST_HEAD(sblist);
+
+	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+		if (!psb)
+			break;
 
-	/* Initialize local short-hand pointers. */
-	bpl = psb->fcp_bpl;
-	pdma_phys_fcp_cmd = psb->dma_handle;
-	pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
-	pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
-			sizeof(struct fcp_rsp);
+		/*
+		 * Get memory from the pci pool to map the virt space to pci bus
+		 * space for an I/O.  The DMA buffer includes space for the
+		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+		 * necessary to support the sg_tablesize.
+		 */
+		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+						GFP_KERNEL, &psb->dma_handle);
+		if (!psb->data) {
+			kfree(psb);
+			break;
+		}
 
-	/*
-	 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance are sg
-	 * list bdes.  Initialize the first two and leave the rest for
-	 * queuecommand.
-	 */
-	bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
-	bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
-	bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
-	bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-	bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
-
-	/* Setup the physical region for the FCP RSP */
-	bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
-	bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
-	bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
-	bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-	bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+		/* Initialize virtual ptrs to dma_buf region. */
+		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
 
-	/*
-	 * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
-	 * initialize it with all known data now.
-	 */
-	iocb = &psb->cur_iocbq.iocb;
-	iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
-	if ((phba->sli_rev == 3) &&
-	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
-		/* fill in immediate fcp command BDE */
-		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+		/* Allocate iotag for psb->cur_iocbq. */
+		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+		if (iotag == 0) {
+			kfree(psb);
+			break;
+		}
+
+		psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+		if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+			      psb->data, psb->dma_handle);
+			kfree(psb);
+			break;
+		}
+		if (last_xritag != NO_XRI
+			&& psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+			non_sequential_xri = 1;
+		} else
+			list_add_tail(&psb->list, &sblist);
+		last_xritag = psb->cur_iocbq.sli4_xritag;
+
+		index = phba->sli4_hba.scsi_xri_cnt++;
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+		psb->fcp_bpl = psb->data;
+		psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+			- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+					sizeof(struct fcp_cmnd));
+
+		/* Initialize local short-hand pointers. */
+		sgl = (struct sli4_sge *)psb->fcp_bpl;
+		pdma_phys_bpl = psb->dma_handle;
+		pdma_phys_fcp_cmd =
+			(psb->dma_handle + phba->cfg_sg_dma_buf_size)
+			 - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+		pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+		/*
+		 * The first two bdes are the FCP_CMD and FCP_RSP.  The balance
+		 * are sg list bdes.  Initialize the first two and leave the
+		 * rest for queuecommand.
+		 */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+		sgl++;
+
+		/* Setup the physical region for the FCP RSP */
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+		bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->word3 = cpu_to_le32(sgl->word3);
+
+		/*
+		 * Since the IOCB for the FCP I/O is built into this
+		 * lpfc_scsi_buf, initialize it with all known data now.
+		 */
+		iocb = &psb->cur_iocbq.iocb;
+		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+		/* setting the BLP size to 2 * sizeof BDE may not be correct.
+		 * We are setting the bpl to point to out sgl. An sgl's
+		 * entries are 16 bytes, a bpl entries are 12 bytes.
+		 */
 		iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
-		iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
-						       unsli3.fcp_ext.icd);
-		iocb->un.fcpi64.bdl.addrHigh = 0;
-		iocb->ulpBdeCount = 0;
-		iocb->ulpLe = 0;
-		/* fill in responce BDE */
-		iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-		iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
-						sizeof(struct fcp_rsp);
-		iocb->unsli3.fcp_ext.rbde.addrLow =
-						putPaddrLow(pdma_phys_fcp_rsp);
-		iocb->unsli3.fcp_ext.rbde.addrHigh =
-						putPaddrHigh(pdma_phys_fcp_rsp);
-	} else {
-		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
-		iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
-		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
-		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
+		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
 		iocb->ulpBdeCount = 1;
 		iocb->ulpLe = 1;
+		iocb->ulpClass = CLASS3;
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		psb->dma_phys_bpl = pdma_phys_bpl;
+		phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+		if (non_sequential_xri) {
+			status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+						pdma_phys_bpl1,
+						psb->cur_iocbq.sli4_xritag);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+			break;
+		}
+	}
+	if (bcnt) {
+		status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+		/* Reset SCSI buffer count for next round of posting */
+		while (!list_empty(&sblist)) {
+			list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+				 list);
+			if (status) {
+				/* Put this back on the abort scsi list */
+				psb->status = IOSTAT_LOCAL_REJECT;
+				psb->result = IOERR_ABORT_REQUESTED;
+				rc++;
+			} else
+				psb->status = IOSTAT_SUCCESS;
+			/* Put it back into the SCSI buffer list */
+			lpfc_release_scsi_buf_s4(phba, psb);
+		}
 	}
-	iocb->ulpClass = CLASS3;
 
-	return psb;
+	return bcnt + non_sequential_xri - rc;
 }
 
 /**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ *   int - number of scsi buffers that were allocated.
+ *   0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+	return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -591,7 +890,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is being released.
  *
@@ -599,7 +898,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
  * lpfc_scsi_buf_list list.
  **/
 static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	unsigned long iflag = 0;
 
@@ -610,21 +909,69 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 }
 
 /**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	unsigned long iflag = 0;
+
+	if (psb->status == IOSTAT_LOCAL_REJECT
+		&& psb->result == IOERR_ABORT_REQUESTED) {
+		spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list,
+			&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+					iflag);
+	} else {
+
+		spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+		psb->pCmd = NULL;
+		list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	}
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+	phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
  *
  * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
  *
  * Return codes:
  *   1 - Error
  *   0 - Success
  **/
 static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 {
 	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
 	struct scatterlist *sgel = NULL;
@@ -827,8 +1174,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
  * @reftag:         out: ref tag (reference tag)
  *
  * Description:
- *   Extract DIF paramters from the command if possible.  Otherwise,
- *   use default paratmers.
+ *   Extract DIF parameters from the command if possible.  Otherwise,
+ *   use default parameters.
  *
  **/
 static inline void
@@ -1312,10 +1659,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
 	uint32_t bgstat = bgf->bgstat;
 	uint64_t failing_sector = 0;
 
-	printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx "
+	printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x "
 			"bgstat=0x%x bghm=0x%x\n",
 			cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd),
-			cmd->request->nr_sectors, bgstat, bghm);
+			blk_rq_sectors(cmd->request), bgstat, bghm);
 
 	spin_lock(&_dump_buf_lock);
 	if (!_dump_buf_done) {
@@ -1412,6 +1759,133 @@ out:
 }
 
 /**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+	struct scatterlist *sgel = NULL;
+	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+	dma_addr_t physaddr;
+	uint32_t num_bde = 0;
+	uint32_t dma_len;
+	uint32_t dma_offset = 0;
+	int nseg;
+
+	/*
+	 * There are three possibilities here - use scatter-gather segment, use
+	 * the single mapping, or neither.  Start the lpfc command prep by
+	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+	 * data bde entry.
+	 */
+	if (scsi_sg_count(scsi_cmnd)) {
+		/*
+		 * The driver stores the segment count returned from pci_map_sg
+		 * because this a count of dma-mappings used to map the use_sg
+		 * pages.  They are not guaranteed to be the same for those
+		 * architectures that implement an IOMMU.
+		 */
+
+		nseg = scsi_dma_map(scsi_cmnd);
+		if (unlikely(!nseg))
+			return 1;
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl += 1;
+
+		lpfc_cmd->seg_cnt = nseg;
+		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+			printk(KERN_ERR "%s: Too many sg segments from "
+			       "dma_map_sg.  Config %d, seg_cnt %d\n",
+			       __func__, phba->cfg_sg_seg_cnt,
+			       lpfc_cmd->seg_cnt);
+			scsi_dma_unmap(scsi_cmnd);
+			return 1;
+		}
+
+		/*
+		 * The driver established a maximum scatter-gather segment count
+		 * during probe that limits the number of sg elements in any
+		 * single scsi command.  Just run through the seg_cnt and format
+		 * the sge's.
+		 * When using SLI-3 the driver will try to fit all the BDEs into
+		 * the IOCB. If it can't then the BDEs get added to a BPL as it
+		 * does for SLI-2 mode.
+		 */
+		scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+			physaddr = sg_dma_address(sgel);
+			dma_len = sg_dma_len(sgel);
+			bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+			if ((num_bde + 1) == nseg)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			dma_offset += dma_len;
+			sgl++;
+		}
+	} else {
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+	}
+
+	/*
+	 * Finish initializing those IOCB fields that are dependent on the
+	 * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
+	 * explicitly reinitialized.
+	 * all iocb memory resources are reused.
+	 */
+	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+	/*
+	 * Due to difference in data length between DIF/non-DIF paths,
+	 * we need to set word 4 of IOCB here
+	 */
+	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+	return 0;
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 	1 - Error
+ * 	0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
  * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
  * @phba: Pointer to hba context object.
  * @vport: Pointer to vport object.
@@ -1504,15 +1978,15 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
  *
  * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
  **/
 static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	/*
 	 * There are only two special cases to consider.  (1) the scsi command
@@ -1529,6 +2003,36 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
 }
 
 /**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+	phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
+/**
  * lpfc_handler_fcp_err - FCP response handler
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +2180,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
  * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
  * @phba: The Hba for which this call is being executed.
  * @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
  *
  * This routine assigns scsi command result by looking into response IOCB
  * status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2461,16 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
 }
 
 /**
- * lpfc_scsi_prep_cmnd -  Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
  * @pnode: Pointer to lpfc_nodelist.
  *
  * This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
  **/
 static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		    struct lpfc_nodelist *pnode)
 {
 	struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2517,11 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 	if (scsi_sg_count(scsi_cmnd)) {
 		if (datadir == DMA_TO_DEVICE) {
 			iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
-			iocb_cmd->un.fcpi.fcpi_parm = 0;
-			iocb_cmd->ulpPU = 0;
+			if (phba->sli_rev < LPFC_SLI_REV4) {
+				iocb_cmd->un.fcpi.fcpi_parm = 0;
+				iocb_cmd->ulpPU = 0;
+			} else
+				iocb_cmd->ulpPU = PARM_READ_CHECK;
 			fcp_cmnd->fcpCntl3 = WRITE_DATA;
 			phba->fc4OutputRequests++;
 		} else {
@@ -2051,20 +2558,60 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 }
 
 /**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		       struct lpfc_nodelist *pnode)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+		    struct lpfc_nodelist *pnode)
+{
+	vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @lun: Logical unit number.
  * @task_mgmt_cmd: SCSI task management command.
  *
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
  *
  * Return codes:
  *   0 - Error
  *   1 - Success
  **/
 static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
 			     struct lpfc_scsi_buf *lpfc_cmd,
 			     unsigned int lun,
 			     uint8_t task_mgmt_cmd)
@@ -2114,6 +2661,107 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 }
 
 /**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+				struct lpfc_scsi_buf *lpfc_cmd,
+				unsigned int lun,
+				uint8_t task_mgmt_cmd)
+{
+	/*
+	 * The prep cmnd routines do not touch the sgl or its
+	 * entries. We may not have to do anything different.
+	 * I will leave this function in place until we can
+	 * run some IO through the driver and determine if changes
+	 * are needed.
+	 */
+	return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+						task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 	0 - Error
+ * 	1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+			     struct lpfc_scsi_buf *lpfc_cmd,
+			     unsigned int lun,
+			     uint8_t task_mgmt_cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+
+	return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+						  task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s3;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+		phba->lpfc_scsi_prep_task_mgmt_cmd =
+					lpfc_scsi_prep_task_mgmt_cmd_s4;
+		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1418 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+	phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+	return 0;
+}
+
+/**
  * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
  * @phba: The Hba for which this call is being executed.
  * @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2178,9 +2826,8 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 			 "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
 			 tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba,
-				       &phba->sli.ring[phba->sli.fcp_ring],
-				       iocbq, iocbqrsp, lpfc_cmd->timeout);
+	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if (status != IOCB_SUCCESS) {
 		if (status == IOCB_TIMEDOUT) {
 			iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2305,7 +2952,6 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli   *psli = &phba->sli;
 	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
 	struct lpfc_nodelist *ndlp = rdata->pnode;
 	struct lpfc_scsi_buf *lpfc_cmd;
@@ -2378,15 +3024,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 		if (cmnd->cmnd[0] == READ_10)
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					"9035 BLKGRD: READ @ sector %llu, "
-					 "count %lu\n",
-					 (unsigned long long)scsi_get_lba(cmnd),
-					cmnd->request->nr_sectors);
+					"count %u\n",
+					(unsigned long long)scsi_get_lba(cmnd),
+					blk_rq_sectors(cmnd->request));
 		else if (cmnd->cmnd[0] == WRITE_10)
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					"9036 BLKGRD: WRITE @ sector %llu, "
-					"count %lu cmd=%p\n",
+					"count %u cmd=%p\n",
 					(unsigned long long)scsi_get_lba(cmnd),
-					cmnd->request->nr_sectors,
+					blk_rq_sectors(cmnd->request),
 					cmnd);
 
 		err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
@@ -2406,15 +3052,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 		if (cmnd->cmnd[0] == READ_10)
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					 "9040 dbg: READ @ sector %llu, "
-					 "count %lu\n",
+					 "count %u\n",
 					 (unsigned long long)scsi_get_lba(cmnd),
-					 cmnd->request->nr_sectors);
+					 blk_rq_sectors(cmnd->request));
 		else if (cmnd->cmnd[0] == WRITE_10)
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					 "9041 dbg: WRITE @ sector %llu, "
-					 "count %lu cmd=%p\n",
+					 "count %u cmd=%p\n",
 					 (unsigned long long)scsi_get_lba(cmnd),
-					 cmnd->request->nr_sectors, cmnd);
+					 blk_rq_sectors(cmnd->request), cmnd);
 		else
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					 "9042 dbg: parser not implemented\n");
@@ -2427,7 +3073,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
 
 	atomic_inc(&ndlp->cmd_pending);
-	err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+	err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
 				  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
 	if (err) {
 		atomic_dec(&ndlp->cmd_pending);
@@ -2490,7 +3136,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
 	struct lpfc_iocbq *iocb;
 	struct lpfc_iocbq *abtsiocb;
 	struct lpfc_scsi_buf *lpfc_cmd;
@@ -2531,7 +3176,10 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	icmd = &abtsiocb->iocb;
 	icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
 	icmd->un.acxri.abortContextTag = cmd->ulpContext;
-	icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+	else
+		icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
 
 	icmd->ulpLe = 1;
 	icmd->ulpClass = cmd->ulpClass;
@@ -2542,7 +3190,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 
 	abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
 	abtsiocb->vport = vport;
-	if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+	if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+	    IOCB_ERROR) {
 		lpfc_sli_release_iocbq(phba, abtsiocb);
 		ret = FAILED;
 		goto out;
@@ -2668,8 +3317,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 			 "0703 Issue target reset to TGT %d LUN %d "
 			 "rpi x%x nlp_flag x%x\n", cmnd->device->id,
 			 cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba,
-					  &phba->sli.ring[phba->sli.fcp_ring],
+	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
 					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if (status == IOCB_TIMEDOUT) {
 		iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2825,11 +3473,10 @@ lpfc_slave_alloc(struct scsi_device *sdev)
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_scsi_buf *scsi_buf = NULL;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
-	uint32_t total = 0, i;
+	uint32_t total = 0;
 	uint32_t num_to_alloc = 0;
-	unsigned long flags;
+	int num_allocated = 0;
 
 	if (!rport || fc_remote_port_chkready(rport))
 		return -ENXIO;
@@ -2863,20 +3510,13 @@ lpfc_slave_alloc(struct scsi_device *sdev)
 				 (phba->cfg_hba_queue_depth - total));
 		num_to_alloc = phba->cfg_hba_queue_depth - total;
 	}
-
-	for (i = 0; i < num_to_alloc; i++) {
-		scsi_buf = lpfc_new_scsi_buf(vport);
-		if (!scsi_buf) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-					 "0706 Failed to allocate "
-					 "command buffer\n");
-			break;
-		}
-
-		spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
-		phba->total_scsi_bufs++;
-		list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
-		spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+	num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+	if (num_to_alloc != num_allocated) {
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+				 "0708 Allocation request of %d "
+				 "command buffers did not succeed.  "
+				 "Allocated %d buffers.\n",
+				 num_to_alloc, num_allocated);
 	}
 	return 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d5fa2..65dfc8bd5b4 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@ struct lpfc_scsi_buf {
 	struct fcp_rsp *fcp_rsp;
 	struct ulp_bde64 *fcp_bpl;
 
+	dma_addr_t dma_phys_bpl;
+
 	/* cur_iocbq has phys of the dma-able buffer.
 	 * Iotag is in here
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index eb5c75c45ba..ff04daf18f4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -29,9 +29,12 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -40,24 +43,7 @@
 #include "lpfc_logmsg.h"
 #include "lpfc_compat.h"
 #include "lpfc_debugfs.h"
-
-/*
- * Define macro to log: Mailbox command x%x cannot issue Data
- * This allows multiple uses of lpfc_msgBlk0311
- * w/o perturbing log msg utility.
- */
-#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
-			lpfc_printf_log(phba, \
-				KERN_INFO, \
-				LOG_MBOX | LOG_SLI, \
-				"(%d):0311 Mailbox command x%x cannot " \
-				"issue Data: x%x x%x x%x\n", \
-				pmbox->vport ? pmbox->vport->vpi : 0, \
-				pmbox->mb.mbxCommand,		\
-				phba->pport->port_state,	\
-				psli->sli_flag,	\
-				flag)
-
+#include "lpfc_vport.h"
 
 /* There are only four IOCB completion types. */
 typedef enum _lpfc_iocb_type {
@@ -67,6 +53,350 @@ typedef enum _lpfc_iocb_type {
 	LPFC_ABORT_IOCB
 } lpfc_iocb_type;
 
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+				  uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+			    uint8_t *, uint32_t *);
+
+static IOCB_t *
+lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
+{
+	return &iocbq->iocb;
+}
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+{
+	union lpfc_wqe *temp_wqe = q->qe[q->host_index].wqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	/* set consumption flag every once in a while */
+	if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
+		bf_set(lpfc_wqe_gen_wqec, &wqe->generic, 1);
+
+	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_wq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_wq_doorbell_index, &doorbell, host_index);
+	bf_set(lpfc_wq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.WQDBregaddr);
+	readl(q->phba->sli4_hba.WQDBregaddr); /* Flush */
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+	uint32_t released = 0;
+
+	if (q->hba_index == index)
+		return 0;
+	do {
+		q->hba_index = ((q->hba_index + 1) % q->entry_count);
+		released++;
+	} while (q->hba_index != index);
+	return released;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @wqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+	struct lpfc_mqe *temp_mqe = q->qe[q->host_index].mqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	lpfc_sli_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+	/* Save off the mailbox pointer for completion */
+	q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+	readl(q->phba->sli4_hba.MQDBregaddr); /* Flush */
+	return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+	/* Clear the mailbox pointer for completion */
+	q->phba->mbox = NULL;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+	struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe;
+
+	/* If the next EQE is not valid then we are done */
+	if (!bf_get(lpfc_eqe_valid, eqe))
+		return NULL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+		return NULL;
+
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
+{
+	uint32_t released = 0;
+	struct lpfc_eqe *temp_eqe;
+	struct lpfc_register doorbell;
+
+	/* while there are valid entries */
+	while (q->hba_index != q->host_index) {
+		temp_eqe = q->qe[q->host_index].eqe;
+		bf_set(lpfc_eqe_valid, temp_eqe, 0);
+		released++;
+		q->host_index = ((q->host_index + 1) % q->entry_count);
+	}
+	if (unlikely(released == 0 && !arm))
+		return 0;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm) {
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+		bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+	}
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+	bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+	return released;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+	struct lpfc_cqe *cqe;
+
+	/* If the next CQE is not valid then we are done */
+	if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+		return NULL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+		return NULL;
+
+	cqe = q->qe[q->hba_index].cqe;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return cqe;
+}
+
+/**
+ * lpfc_sli4_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
+{
+	uint32_t released = 0;
+	struct lpfc_cqe *temp_qe;
+	struct lpfc_register doorbell;
+
+	/* while there are valid entries */
+	while (q->hba_index != q->host_index) {
+		temp_qe = q->qe[q->host_index].cqe;
+		bf_set(lpfc_cqe_valid, temp_qe, 0);
+		released++;
+		q->host_index = ((q->host_index + 1) % q->entry_count);
+	}
+	if (unlikely(released == 0 && !arm))
+		return 0;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm)
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+	bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+	return released;
+}
+
+/**
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ * @q: The Header Receive Queue to operate on.
+ * @wqe: The Receive Queue Entry to put on the Receive queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+		 struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+	struct lpfc_rqe *temp_hrqe = hq->qe[hq->host_index].rqe;
+	struct lpfc_rqe *temp_drqe = dq->qe[dq->host_index].rqe;
+	struct lpfc_register doorbell;
+	int put_index = hq->host_index;
+
+	if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+		return -EINVAL;
+	if (hq->host_index != dq->host_index)
+		return -EINVAL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+		return -EBUSY;
+	lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+	lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+	/* Update the host index to point to the next slot */
+	hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+	dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+
+	/* Ring The Header Receive Queue Doorbell */
+	if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+		doorbell.word0 = 0;
+		bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
+		       LPFC_RQ_POST_BATCH);
+		bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
+		writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
+	}
+	return put_index;
+}
+
+/**
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ * @q: The Header Receive Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+	if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+		return 0;
+	hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+	dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+	return 1;
+}
+
 /**
  * lpfc_cmd_iocb - Get next command iocb entry in the ring
  * @phba: Pointer to HBA context object.
@@ -121,6 +451,76 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
 }
 
 /**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+	return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	uint16_t adj_xri;
+	struct lpfc_sglq *sglq;
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+		return NULL;
+	sglq =  phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+	return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+	struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+	struct lpfc_sglq *sglq = NULL;
+	uint16_t adj_xri;
+	list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+	return sglq;
+}
+
+/**
  * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
  * @phba: Pointer to HBA context object.
  *
@@ -142,7 +542,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
 }
 
 /**
- * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
  *
@@ -150,9 +550,62 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
  * iocb object to the iocb pool. The iotag in the iocb object
  * does not change for each use of the iocb object. This function
  * clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_sgl_list).
  **/
 static void
-__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	struct lpfc_sglq *sglq;
+	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+	unsigned long iflag;
+
+	if (iocbq->sli4_xritag == NO_XRI)
+		sglq = NULL;
+	else
+		sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+	if (sglq)  {
+		if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
+			|| ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+			&& (iocbq->iocb.un.ulpWord[4]
+				== IOERR_SLI_ABORTED))) {
+			spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
+					iflag);
+			list_add(&sglq->list,
+				&phba->sli4_hba.lpfc_abts_els_sgl_list);
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.abts_sgl_list_lock, iflag);
+		} else
+			list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+	}
+
+
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
+	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 {
 	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
 
@@ -160,10 +613,27 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 	 * Clean all volatile data fields, preserve iotag and node struct.
 	 */
 	memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
 	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
 }
 
 /**
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	phba->__lpfc_sli_release_iocbq(phba, iocbq);
+}
+
+/**
  * lpfc_sli_release_iocbq - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
@@ -281,6 +751,14 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
 	case CMD_GEN_REQUEST64_CR:
 	case CMD_GEN_REQUEST64_CX:
 	case CMD_XMIT_ELS_RSP64_CX:
+	case DSSCMD_IWRITE64_CR:
+	case DSSCMD_IWRITE64_CX:
+	case DSSCMD_IREAD64_CR:
+	case DSSCMD_IREAD64_CX:
+	case DSSCMD_INVALIDATE_DEK:
+	case DSSCMD_SET_KEK:
+	case DSSCMD_GET_KEK_ID:
+	case DSSCMD_GEN_XFER:
 		type = LPFC_SOL_IOCB;
 		break;
 	case CMD_ABORT_XRI_CN:
@@ -348,7 +826,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba)
 	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb)
 		return -ENOMEM;
-	pmbox = &pmb->mb;
+	pmbox = &pmb->u.mb;
 	phba->link_state = LPFC_INIT_MBX_CMDS;
 	for (i = 0; i < psli->num_rings; i++) {
 		lpfc_config_ring(phba, i, pmb);
@@ -779,8 +1257,8 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
 		phba->hbqs[i].buffer_count = 0;
 	}
 	/* Return all HBQ buffer that are in-fly */
-	list_for_each_entry_safe(dmabuf, next_dmabuf,
-			&phba->hbqbuf_in_list, list) {
+	list_for_each_entry_safe(dmabuf, next_dmabuf, &phba->rb_pend_list,
+				 list) {
 		hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
 		list_del(&hbq_buf->dbuf.list);
 		if (hbq_buf->tag == -1) {
@@ -814,10 +1292,28 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
  * pointer to the hbq entry if it successfully post the buffer
  * else it will return NULL.
  **/
-static struct lpfc_hbq_entry *
+static int
 lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
 			 struct hbq_dmabuf *hbq_buf)
 {
+	return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
 	struct lpfc_hbq_entry *hbqe;
 	dma_addr_t physaddr = hbq_buf->dbuf.phys;
 
@@ -838,8 +1334,40 @@ lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
 				/* flush */
 		readl(phba->hbq_put + hbqno);
 		list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
-	}
-	return hbqe;
+		return 0;
+	} else
+		return -ENOMEM;
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
+	int rc;
+	struct lpfc_rqe hrqe;
+	struct lpfc_rqe drqe;
+
+	hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+	hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+	drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+	drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+	rc = lpfc_sli4_rq_put(phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+			      &hrqe, &drqe);
+	if (rc < 0)
+		return rc;
+	hbq_buf->tag = rc;
+	list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+	return 0;
 }
 
 /* HBQ for ELS and CT traffic. */
@@ -914,7 +1442,7 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count)
 				 dbuf.list);
 		hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
 				      (hbqno << 16));
-		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
 			phba->hbqs[hbqno].buffer_count++;
 			posted++;
 		} else
@@ -965,6 +1493,25 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
 }
 
 /**
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+	struct lpfc_dmabuf *d_buf;
+
+	list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+	if (!d_buf)
+		return NULL;
+	return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
  * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
  * @phba: Pointer to HBA context object.
  * @tag: Tag of the hbq buffer.
@@ -985,12 +1532,15 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
 	if (hbqno >= LPFC_MAX_HBQS)
 		return NULL;
 
+	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
 		hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
 		if (hbq_buf->tag == tag) {
+			spin_unlock_irq(&phba->hbalock);
 			return hbq_buf;
 		}
 	}
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
 			"1803 Bad hbq tag. Data: x%x x%x\n",
 			tag, phba->hbqs[tag >> 16].buffer_count);
@@ -1013,9 +1563,8 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
 
 	if (hbq_buffer) {
 		hbqno = hbq_buffer->tag >> 16;
-		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
 			(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
-		}
 	}
 }
 
@@ -1086,6 +1635,15 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 	case MBX_HEARTBEAT:
 	case MBX_PORT_CAPABILITIES:
 	case MBX_PORT_IOV_CONTROL:
+	case MBX_SLI4_CONFIG:
+	case MBX_SLI4_REQ_FTRS:
+	case MBX_REG_FCFI:
+	case MBX_UNREG_FCFI:
+	case MBX_REG_VFI:
+	case MBX_UNREG_VFI:
+	case MBX_INIT_VPI:
+	case MBX_INIT_VFI:
+	case MBX_RESUME_RPI:
 		ret = mbxCommand;
 		break;
 	default:
@@ -1106,7 +1664,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
  * will wake up thread waiting on the wait queue pointed by context1
  * of the mailbox.
  **/
-static void
+void
 lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 {
 	wait_queue_head_t *pdone_q;
@@ -1140,7 +1698,7 @@ void
 lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_dmabuf *mp;
-	uint16_t rpi;
+	uint16_t rpi, vpi;
 	int rc;
 
 	mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1150,24 +1708,30 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		kfree(mp);
 	}
 
+	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+	    (phba->sli_rev == LPFC_SLI_REV4))
+		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
 	/*
 	 * If a REG_LOGIN succeeded  after node is destroyed or node
 	 * is in re-discovery driver need to cleanup the RPI.
 	 */
 	if (!(phba->pport->load_flag & FC_UNLOADING) &&
-	    pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
-	    !pmb->mb.mbxStatus) {
-
-		rpi = pmb->mb.un.varWords[0];
-		lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
+	    pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+	    !pmb->u.mb.mbxStatus) {
+		rpi = pmb->u.mb.un.varWords[0];
+		vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+		lpfc_unreg_login(phba, vpi, rpi, pmb);
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 		if (rc != MBX_NOT_FINISHED)
 			return;
 	}
 
-	mempool_free(pmb, phba->mbox_mem_pool);
-	return;
+	if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, pmb);
+	else
+		mempool_free(pmb, phba->mbox_mem_pool);
 }
 
 /**
@@ -1204,7 +1768,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 		if (pmb == NULL)
 			break;
 
-		pmbox = &pmb->mb;
+		pmbox = &pmb->u.mb;
 
 		if (pmbox->mbxCommand != MBX_HEARTBEAT) {
 			if (pmb->vport) {
@@ -1233,9 +1797,10 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 			/* Unknow mailbox command compl */
 			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 					"(%d):0323 Unknown Mailbox command "
-					"%x Cmpl\n",
+					"x%x (x%x) Cmpl\n",
 					pmb->vport ? pmb->vport->vpi : 0,
-					pmbox->mbxCommand);
+					pmbox->mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, pmb));
 			phba->link_state = LPFC_HBA_ERROR;
 			phba->work_hs = HS_FFER3;
 			lpfc_handle_eratt(phba);
@@ -1250,29 +1815,29 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 						LOG_MBOX | LOG_SLI,
 						"(%d):0305 Mbox cmd cmpl "
 						"error - RETRYing Data: x%x "
-						"x%x x%x x%x\n",
+						"(x%x) x%x x%x x%x\n",
 						pmb->vport ? pmb->vport->vpi :0,
 						pmbox->mbxCommand,
+						lpfc_sli4_mbox_opcode_get(phba,
+									  pmb),
 						pmbox->mbxStatus,
 						pmbox->un.varWords[0],
 						pmb->vport->port_state);
 				pmbox->mbxStatus = 0;
 				pmbox->mbxOwner = OWN_HOST;
-				spin_lock_irq(&phba->hbalock);
-				phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-				spin_unlock_irq(&phba->hbalock);
 				rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
-				if (rc == MBX_SUCCESS)
+				if (rc != MBX_NOT_FINISHED)
 					continue;
 			}
 		}
 
 		/* Mailbox cmd <cmd> Cmpl <cmpl> */
 		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-				"(%d):0307 Mailbox cmd x%x Cmpl x%p "
+				"(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
 				"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
 				pmb->vport ? pmb->vport->vpi : 0,
 				pmbox->mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, pmb),
 				pmb->mbox_cmpl,
 				*((uint32_t *) pmbox),
 				pmbox->un.varWords[0],
@@ -1317,6 +1882,45 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
 	return &hbq_entry->dbuf;
 }
 
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			 struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+			 uint32_t fch_type)
+{
+	int i;
+
+	/* unSolicited Responses */
+	if (pring->prt[0].profile) {
+		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+									saveq);
+		return 1;
+	}
+	/* We must search, based on rctl / type
+	   for the right routine */
+	for (i = 0; i < pring->num_mask; i++) {
+		if ((pring->prt[i].rctl == fch_r_ctl) &&
+		    (pring->prt[i].type == fch_type)) {
+			if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+				(pring->prt[i].lpfc_sli_rcv_unsol_event)
+						(phba, pring, saveq);
+			return 1;
+		}
+	}
+	return 0;
+}
 
 /**
  * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
@@ -1339,7 +1943,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	IOCB_t           * irsp;
 	WORD5            * w5p;
 	uint32_t           Rctl, Type;
-	uint32_t           match, i;
+	uint32_t           match;
 	struct lpfc_iocbq *iocbq;
 	struct lpfc_dmabuf *dmzbuf;
 
@@ -1482,35 +2086,12 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		}
 	}
 
-	/* unSolicited Responses */
-	if (pring->prt[0].profile) {
-		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
-			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
-									saveq);
-		match = 1;
-	} else {
-		/* We must search, based on rctl / type
-		   for the right routine */
-		for (i = 0; i < pring->num_mask; i++) {
-			if ((pring->prt[i].rctl == Rctl)
-			    && (pring->prt[i].type == Type)) {
-				if (pring->prt[i].lpfc_sli_rcv_unsol_event)
-					(pring->prt[i].lpfc_sli_rcv_unsol_event)
-							(phba, pring, saveq);
-				match = 1;
-				break;
-			}
-		}
-	}
-	if (match == 0) {
-		/* Unexpected Rctl / Type received */
-		/* Ring <ringno> handler: unexpected
-		   Rctl <Rctl> Type <Type> received */
+	if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0313 Ring %d handler: unexpected Rctl x%x "
 				"Type x%x received\n",
 				pring->ringno, Rctl, Type);
-	}
+
 	return 1;
 }
 
@@ -1552,6 +2133,37 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
 }
 
 /**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. This function is called with the
+ * hbalock held.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+			     struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+	struct lpfc_iocbq *cmd_iocb;
+
+	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+		cmd_iocb = phba->sli.iocbq_lookup[iotag];
+		list_del_init(&cmd_iocb->list);
+		pring->txcmplq_cnt--;
+		return cmd_iocb;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"0372 iotag x%x is out off range: max iotag (x%x)\n",
+			iotag, phba->sli.last_iotag);
+	return NULL;
+}
+
+/**
  * lpfc_sli_process_sol_iocb - process solicited iocb completion
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -1954,7 +2566,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
 			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
 				(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				lpfc_rampdown_queue_depth(phba);
+				phba->lpfc_rampdown_queue_depth(phba);
 				spin_lock_irqsave(&phba->hbalock, iflag);
 			}
 
@@ -2068,39 +2680,215 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			struct lpfc_iocbq *rspiocbp)
+{
+	struct lpfc_iocbq *saveq;
+	struct lpfc_iocbq *cmdiocbp;
+	struct lpfc_iocbq *next_iocb;
+	IOCB_t *irsp = NULL;
+	uint32_t free_saveq;
+	uint8_t iocb_cmd_type;
+	lpfc_iocb_type type;
+	unsigned long iflag;
+	int rc;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* First add the response iocb to the countinueq list */
+	list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
+	pring->iocb_continueq_cnt++;
+
+	/* Now, determine whetehr the list is completed for processing */
+	irsp = &rspiocbp->iocb;
+	if (irsp->ulpLe) {
+		/*
+		 * By default, the driver expects to free all resources
+		 * associated with this iocb completion.
+		 */
+		free_saveq = 1;
+		saveq = list_get_first(&pring->iocb_continueq,
+				       struct lpfc_iocbq, list);
+		irsp = &(saveq->iocb);
+		list_del_init(&pring->iocb_continueq);
+		pring->iocb_continueq_cnt = 0;
+
+		pring->stats.iocb_rsp++;
+
+		/*
+		 * If resource errors reported from HBA, reduce
+		 * queuedepths of the SCSI device.
+		 */
+		if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+		    (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			phba->lpfc_rampdown_queue_depth(phba);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+		}
+
+		if (irsp->ulpStatus) {
+			/* Rsp ring <ringno> error: IOCB */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0328 Rsp Ring %d error: "
+					"IOCB Data: "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x\n",
+					pring->ringno,
+					irsp->un.ulpWord[0],
+					irsp->un.ulpWord[1],
+					irsp->un.ulpWord[2],
+					irsp->un.ulpWord[3],
+					irsp->un.ulpWord[4],
+					irsp->un.ulpWord[5],
+					*(((uint32_t *) irsp) + 6),
+					*(((uint32_t *) irsp) + 7),
+					*(((uint32_t *) irsp) + 8),
+					*(((uint32_t *) irsp) + 9),
+					*(((uint32_t *) irsp) + 10),
+					*(((uint32_t *) irsp) + 11),
+					*(((uint32_t *) irsp) + 12),
+					*(((uint32_t *) irsp) + 13),
+					*(((uint32_t *) irsp) + 14),
+					*(((uint32_t *) irsp) + 15));
+		}
+
+		/*
+		 * Fetch the IOCB command type and call the correct completion
+		 * routine. Solicited and Unsolicited IOCBs on the ELS ring
+		 * get freed back to the lpfc_iocb_list by the discovery
+		 * kernel thread.
+		 */
+		iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+		type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+		switch (type) {
+		case LPFC_SOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			break;
+
+		case LPFC_UNSOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			if (!rc)
+				free_saveq = 0;
+			break;
+
+		case LPFC_ABORT_IOCB:
+			cmdiocbp = NULL;
+			if (irsp->ulpCommand != CMD_XRI_ABORTED_CX)
+				cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+								 saveq);
+			if (cmdiocbp) {
+				/* Call the specified completion routine */
+				if (cmdiocbp->iocb_cmpl) {
+					spin_unlock_irqrestore(&phba->hbalock,
+							       iflag);
+					(cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
+							      saveq);
+					spin_lock_irqsave(&phba->hbalock,
+							  iflag);
+				} else
+					__lpfc_sli_release_iocbq(phba,
+								 cmdiocbp);
+			}
+			break;
+
+		case LPFC_UNKNOWN_IOCB:
+			if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+				char adaptermsg[LPFC_MAX_ADPTMSG];
+				memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+				memcpy(&adaptermsg[0], (uint8_t *)irsp,
+				       MAX_MSG_DATA);
+				dev_warn(&((phba->pcidev)->dev),
+					 "lpfc%d: %s\n",
+					 phba->brd_no, adaptermsg);
+			} else {
+				/* Unknown IOCB command */
+				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+						"0335 Unknown IOCB "
+						"command Data: x%x "
+						"x%x x%x x%x\n",
+						irsp->ulpCommand,
+						irsp->ulpStatus,
+						irsp->ulpIoTag,
+						irsp->ulpContext);
+			}
+			break;
+		}
+
+		if (free_saveq) {
+			list_for_each_entry_safe(rspiocbp, next_iocb,
+						 &saveq->list, list) {
+				list_del(&rspiocbp->list);
+				__lpfc_sli_release_iocbq(phba, rspiocbp);
+			}
+			__lpfc_sli_release_iocbq(phba, saveq);
+		}
+		rspiocbp = NULL;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @mask: Host attention register mask for this ring.
  *
- * This function is called from the worker thread when there is a ring
- * event for non-fcp rings. The caller does not hold any lock .
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the
- * response iocb indicates a completion of a command iocb. The function
- * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited
- * iocb. The function frees the resources or calls the completion handler if
- * this iocb is an abort completion. The function returns 0 when the allocated
- * iocbs are not freed, otherwise returns 1.
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
  **/
-int
+void
 lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 				struct lpfc_sli_ring *pring, uint32_t mask)
 {
+	phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
 	struct lpfc_pgp *pgp;
 	IOCB_t *entry;
 	IOCB_t *irsp = NULL;
 	struct lpfc_iocbq *rspiocbp = NULL;
-	struct lpfc_iocbq *next_iocb;
-	struct lpfc_iocbq *cmdiocbp;
-	struct lpfc_iocbq *saveq;
-	uint8_t iocb_cmd_type;
-	lpfc_iocb_type type;
-	uint32_t status, free_saveq;
 	uint32_t portRspPut, portRspMax;
-	int rc = 1;
 	unsigned long iflag;
+	uint32_t status;
 
 	pgp = &phba->port_gp[pring->ringno];
 	spin_lock_irqsave(&phba->hbalock, iflag);
@@ -2128,7 +2916,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 		phba->work_hs = HS_FFER3;
 		lpfc_handle_eratt(phba);
 
-		return 1;
+		return;
 	}
 
 	rmb();
@@ -2173,138 +2961,10 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 
 		writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
 
-		list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
-
-		pring->iocb_continueq_cnt++;
-		if (irsp->ulpLe) {
-			/*
-			 * By default, the driver expects to free all resources
-			 * associated with this iocb completion.
-			 */
-			free_saveq = 1;
-			saveq = list_get_first(&pring->iocb_continueq,
-					       struct lpfc_iocbq, list);
-			irsp = &(saveq->iocb);
-			list_del_init(&pring->iocb_continueq);
-			pring->iocb_continueq_cnt = 0;
-
-			pring->stats.iocb_rsp++;
-
-			/*
-			 * If resource errors reported from HBA, reduce
-			 * queuedepths of the SCSI device.
-			 */
-			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
-			     (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				lpfc_rampdown_queue_depth(phba);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-			}
-
-			if (irsp->ulpStatus) {
-				/* Rsp ring <ringno> error: IOCB */
-				lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
-						"0328 Rsp Ring %d error: "
-						"IOCB Data: "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x "
-						"x%x x%x x%x x%x\n",
-						pring->ringno,
-						irsp->un.ulpWord[0],
-						irsp->un.ulpWord[1],
-						irsp->un.ulpWord[2],
-						irsp->un.ulpWord[3],
-						irsp->un.ulpWord[4],
-						irsp->un.ulpWord[5],
-						*(((uint32_t *) irsp) + 6),
-						*(((uint32_t *) irsp) + 7),
-						*(((uint32_t *) irsp) + 8),
-						*(((uint32_t *) irsp) + 9),
-						*(((uint32_t *) irsp) + 10),
-						*(((uint32_t *) irsp) + 11),
-						*(((uint32_t *) irsp) + 12),
-						*(((uint32_t *) irsp) + 13),
-						*(((uint32_t *) irsp) + 14),
-						*(((uint32_t *) irsp) + 15));
-			}
-
-			/*
-			 * Fetch the IOCB command type and call the correct
-			 * completion routine.  Solicited and Unsolicited
-			 * IOCBs on the ELS ring get freed back to the
-			 * lpfc_iocb_list by the discovery kernel thread.
-			 */
-			iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
-			type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
-			if (type == LPFC_SOL_IOCB) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				rc = lpfc_sli_process_sol_iocb(phba, pring,
-							       saveq);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-			} else if (type == LPFC_UNSOL_IOCB) {
-				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				rc = lpfc_sli_process_unsol_iocb(phba, pring,
-								 saveq);
-				spin_lock_irqsave(&phba->hbalock, iflag);
-				if (!rc)
-					free_saveq = 0;
-			} else if (type == LPFC_ABORT_IOCB) {
-				if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
-				    ((cmdiocbp =
-				      lpfc_sli_iocbq_lookup(phba, pring,
-							    saveq)))) {
-					/* Call the specified completion
-					   routine */
-					if (cmdiocbp->iocb_cmpl) {
-						spin_unlock_irqrestore(
-						       &phba->hbalock,
-						       iflag);
-						(cmdiocbp->iocb_cmpl) (phba,
-							     cmdiocbp, saveq);
-						spin_lock_irqsave(
-							  &phba->hbalock,
-							  iflag);
-					} else
-						__lpfc_sli_release_iocbq(phba,
-								      cmdiocbp);
-				}
-			} else if (type == LPFC_UNKNOWN_IOCB) {
-				if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
-
-					char adaptermsg[LPFC_MAX_ADPTMSG];
-
-					memset(adaptermsg, 0,
-					       LPFC_MAX_ADPTMSG);
-					memcpy(&adaptermsg[0], (uint8_t *) irsp,
-					       MAX_MSG_DATA);
-					dev_warn(&((phba->pcidev)->dev),
-						 "lpfc%d: %s\n",
-						 phba->brd_no, adaptermsg);
-				} else {
-					/* Unknown IOCB command */
-					lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-							"0335 Unknown IOCB "
-							"command Data: x%x "
-							"x%x x%x x%x\n",
-							irsp->ulpCommand,
-							irsp->ulpStatus,
-							irsp->ulpIoTag,
-							irsp->ulpContext);
-				}
-			}
-
-			if (free_saveq) {
-				list_for_each_entry_safe(rspiocbp, next_iocb,
-							 &saveq->list, list) {
-					list_del(&rspiocbp->list);
-					__lpfc_sli_release_iocbq(phba,
-								 rspiocbp);
-				}
-				__lpfc_sli_release_iocbq(phba, saveq);
-			}
-			rspiocbp = NULL;
-		}
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Handle the response IOCB */
+		rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+		spin_lock_irqsave(&phba->hbalock, iflag);
 
 		/*
 		 * If the port response put pointer has not been updated, sync
@@ -2338,7 +2998,37 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 	}
 
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
-	return rc;
+	return;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflag;
+
+	while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+		/* Get the response iocb from the head of work queue */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
+				 irspiocbq, struct lpfc_iocbq, list);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Process the response iocb */
+		lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+	}
 }
 
 /**
@@ -2420,7 +3110,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdready - Check for host status bits
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
  * @phba: Pointer to HBA context object.
  * @mask: Bit mask to be checked.
  *
@@ -2432,8 +3122,8 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
  * function returns 1 when HBA fail to restart otherwise returns
  * zero.
  **/
-int
-lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
 {
 	uint32_t status;
 	int i = 0;
@@ -2477,6 +3167,56 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
 	return retval;
 }
 
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+	uint32_t status;
+	int retval = 0;
+
+	/* Read the HBA Host Status Register */
+	status = lpfc_sli4_post_status_check(phba);
+
+	if (status) {
+		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+		lpfc_sli_brdrestart(phba);
+		status = lpfc_sli4_post_status_check(phba);
+	}
+
+	/* Check to see if any errors occurred during init */
+	if (status) {
+		phba->link_state = LPFC_HBA_ERROR;
+		retval = 1;
+	} else
+		phba->sli4_hba.intr_enable = 0;
+
+	return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+	return phba->lpfc_sli_brdready(phba, mask);
+}
+
 #define BARRIER_TEST_PATTERN (0xdeadbeef)
 
 /**
@@ -2532,7 +3272,7 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
 		mdelay(1);
 
 	if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
-		if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
+		if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
 		    phba->pport->stopped)
 			goto restore_hc;
 		else
@@ -2613,7 +3353,9 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 		return 1;
 	}
 
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
 
 	mempool_free(pmb, phba->mbox_mem_pool);
 
@@ -2636,10 +3378,10 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 	}
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	psli->mbox_active = NULL;
 	phba->link_flag &= ~LS_IGNORE_ERATT;
 	spin_unlock_irq(&phba->hbalock);
 
-	psli->mbox_active = NULL;
 	lpfc_hba_down_post(phba);
 	phba->link_state = LPFC_HBA_ERROR;
 
@@ -2647,7 +3389,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdreset - Reset the HBA
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
  * @phba: Pointer to HBA context object.
  *
  * This function resets the HBA by writing HC_INITFF to the control
@@ -2683,7 +3425,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
 			      (cfg_value &
 			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
-	psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
+	psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
 	/* Now toggle INITFF bit in the Host Control Register */
 	writel(HC_INITFF, phba->HCregaddr);
 	mdelay(1);
@@ -2710,7 +3453,66 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint16_t cfg_value;
+	uint8_t qindx;
+
+	/* Reset HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0295 Reset HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	/* perform board reset */
+	phba->fc_eventTag = 0;
+	phba->pport->fc_myDID = 0;
+	phba->pport->fc_prevDID = 0;
+
+	/* Turn off parity checking and serr during the physical reset */
+	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	pci_write_config_word(phba->pcidev, PCI_COMMAND,
+			      (cfg_value &
+			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~(LPFC_PROCESS_LA);
+	phba->fcf.fcf_flag = 0;
+	/* Clean up the child queue list for the CQs */
+	list_del_init(&phba->sli4_hba.mbx_wq->list);
+	list_del_init(&phba->sli4_hba.els_wq->list);
+	list_del_init(&phba->sli4_hba.hdr_rq->list);
+	list_del_init(&phba->sli4_hba.dat_rq->list);
+	list_del_init(&phba->sli4_hba.mbx_cq->list);
+	list_del_init(&phba->sli4_hba.els_cq->list);
+	list_del_init(&phba->sli4_hba.rxq_cq->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+	for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+		list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Now physically reset the device */
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0389 Performing PCI function reset!\n");
+	/* Perform FCoE PCI function reset */
+	lpfc_pci_function_reset(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
  * @phba: Pointer to HBA context object.
  *
  * This function is called in the SLI initialization code path to
@@ -2722,8 +3524,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
  * The function does not guarantee completion of MBX_RESTART mailbox
  * command before the return of this function.
  **/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli;
@@ -2762,7 +3564,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
 	lpfc_sli_brdreset(phba);
 	phba->pport->stopped = 0;
 	phba->link_state = LPFC_INIT_START;
-
+	phba->hba_flag = 0;
 	spin_unlock_irq(&phba->hbalock);
 
 	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2777,6 +3579,55 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+
+
+	/* Restart HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0296 Restart HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	lpfc_sli4_brdreset(phba);
+
+	spin_lock_irq(&phba->hbalock);
+	phba->pport->stopped = 0;
+	phba->link_state = LPFC_INIT_START;
+	phba->hba_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
+
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = get_seconds();
+
+	lpfc_hba_down_post(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+	return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
  * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
  * @phba: Pointer to HBA context object.
  *
@@ -2940,7 +3791,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
 	if (!pmb)
 		return -ENOMEM;
 
-	pmbox = &pmb->mb;
+	pmbox = &pmb->u.mb;
 
 	/* Initialize the struct lpfc_sli_hbq structure for each hbq */
 	phba->link_state = LPFC_INIT_MBX_CMDS;
@@ -2984,6 +3835,26 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+	phba->hbq_in_use = 1;
+	phba->hbqs[0].entry_count = lpfc_hbq_defs[0]->entry_count;
+	phba->hbq_count = 1;
+	/* Initially populate or replenish the HBQs */
+	lpfc_sli_hbqbuf_init_hbqs(phba, 0);
+	return 0;
+}
+
+/**
  * lpfc_sli_config_port - Issue config port mailbox command
  * @phba: Pointer to HBA context object.
  * @sli_mode: sli mode - 2/3
@@ -3047,33 +3918,43 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0442 Adapter failed to init, mbxCmd x%x "
 				"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
-				pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
 			spin_lock_irq(&phba->hbalock);
-			phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
+			phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
 			spin_unlock_irq(&phba->hbalock);
 			rc = -ENXIO;
-		} else
+		} else {
+			/* Allow asynchronous mailbox command to go through */
+			spin_lock_irq(&phba->hbalock);
+			phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+			spin_unlock_irq(&phba->hbalock);
 			done = 1;
+		}
 	}
 	if (!done) {
 		rc = -EINVAL;
 		goto do_prep_failed;
 	}
-	if (pmb->mb.un.varCfgPort.sli_mode == 3) {
-		if (!pmb->mb.un.varCfgPort.cMA) {
+	if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+		if (!pmb->u.mb.un.varCfgPort.cMA) {
 			rc = -ENXIO;
 			goto do_prep_failed;
 		}
-		if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+		if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
 			phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
-			phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+			phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+			phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+				phba->max_vpi : phba->max_vports;
+
 		} else
 			phba->max_vpi = 0;
-		if (pmb->mb.un.varCfgPort.gerbm)
+		if (pmb->u.mb.un.varCfgPort.gdss)
+			phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+		if (pmb->u.mb.un.varCfgPort.gerbm)
 			phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
-		if (pmb->mb.un.varCfgPort.gcrp)
+		if (pmb->u.mb.un.varCfgPort.gcrp)
 			phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
-		if (pmb->mb.un.varCfgPort.ginb) {
+		if (pmb->u.mb.un.varCfgPort.ginb) {
 			phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
 			phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
 			phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
@@ -3089,7 +3970,7 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 		}
 
 		if (phba->cfg_enable_bg) {
-			if (pmb->mb.un.varCfgPort.gbg)
+			if (pmb->u.mb.un.varCfgPort.gbg)
 				phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
 			else
 				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -3184,8 +4065,9 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
 		if (rc)
 			goto lpfc_sli_hba_setup_error;
 	}
-
+	spin_lock_irq(&phba->hbalock);
 	phba->sli.sli_flag |= LPFC_PROCESS_LA;
+	spin_unlock_irq(&phba->hbalock);
 
 	rc = lpfc_config_port_post(phba);
 	if (rc)
@@ -3200,6 +4082,488 @@ lpfc_sli_hba_setup_error:
 	return rc;
 }
 
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+		LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_dmabuf *mp;
+	struct lpfc_mqe *mqe;
+	uint32_t data_length;
+	int rc;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	mqe = &mboxq->u.mqe;
+	if (lpfc_dump_fcoe_param(phba, mboxq))
+		return -ENOMEM;
+
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):2571 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	if (rc) {
+		lpfc_mbuf_free(phba, mp->virt, mp->phys);
+		kfree(mp);
+		return -EIO;
+	}
+	data_length = mqe->un.mb_words[5];
+	if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+		return -EIO;
+
+	lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ *	      On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command.  In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		    uint8_t *vpd, uint32_t *vpd_size)
+{
+	int rc = 0;
+	uint32_t dma_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_mqe *mqe;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * Get a DMA buffer for the vpd data resulting from the READ_REV
+	 * mailbox command.
+	 */
+	dma_size = *vpd_size;
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+					  dma_size,
+					  &dmabuf->phys,
+					  GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+	memset(dmabuf->virt, 0, dma_size);
+
+	/*
+	 * The SLI4 implementation of READ_REV conflicts at word1,
+	 * bits 31:16 and SLI4 adds vpd functionality not present
+	 * in SLI3.  This code corrects the conflicts.
+	 */
+	lpfc_read_rev(phba, mboxq);
+	mqe = &mboxq->u.mqe;
+	mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+	mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+	mqe->un.read_rev.word1 &= 0x0000FFFF;
+	bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+	bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc) {
+		dma_free_coherent(&phba->pcidev->dev, dma_size,
+				  dmabuf->virt, dmabuf->phys);
+		return -EIO;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0380 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	/*
+	 * The available vpd length cannot be bigger than the
+	 * DMA buffer passed to the port.  Catch the less than
+	 * case and update the caller's size.
+	 */
+	if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+		*vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+	lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+	dma_free_coherent(&phba->pcidev->dev, dma_size,
+			  dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+	uint8_t fcp_eqidx;
+
+	lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+	lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+	lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+		lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+				     LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+	int rc;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mqe *mqe;
+	uint8_t *vpd;
+	uint32_t vpd_size;
+	uint32_t ftr_rsp = 0;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+	struct lpfc_vport *vport = phba->pport;
+	struct lpfc_dmabuf *mp;
+
+	/* Perform a PCI function reset to start from clean */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+
+	/* Check the HBA Host Status Register for readyness */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+	else {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	/*
+	 * Allocate a single mailbox container for initializing the
+	 * port.
+	 */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/*
+	 * Continue initialization with default values even if driver failed
+	 * to read FCoE param config regions
+	 */
+	if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+			"2570 Failed to read FCoE parameters \n");
+
+	/* Issue READ_REV to collect vpd and FW information. */
+	vpd_size = PAGE_SIZE;
+	vpd = kzalloc(vpd_size, GFP_KERNEL);
+	if (!vpd) {
+		rc = -ENOMEM;
+		goto out_free_mbox;
+	}
+
+	rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+	if (unlikely(rc))
+		goto out_free_vpd;
+
+	mqe = &mboxq->u.mqe;
+	if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+		    &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+	    (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+			"0376 READ_REV Error. SLI Level %d "
+			"FCoE enabled %d\n",
+			bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+			bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+	/* Single threaded at this point, no need for lock */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag |= HBA_FCOE_SUPPORT;
+	spin_unlock_irq(&phba->hbalock);
+	/*
+	 * Evaluate the read rev and vpd data. Populate the driver
+	 * state with the results. If this routine fails, the failure
+	 * is not fatal as the driver will use generic values.
+	 */
+	rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+	if (unlikely(!rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0377 Error %d parsing vpd. "
+				"Using defaults.\n", rc);
+		rc = 0;
+	}
+
+	/* By now, we should determine the SLI revision, hard code for now */
+	phba->sli_rev = LPFC_SLI_REV4;
+
+	/*
+	 * Discover the port's supported feature set and match it against the
+	 * hosts requests.
+	 */
+	lpfc_request_features(phba, mboxq);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	/*
+	 * The port must support FCP initiator mode as this is the
+	 * only mode running in the host.
+	 */
+	if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0378 No support for fcpi mode.\n");
+		ftr_rsp++;
+	}
+
+	/*
+	 * If the port cannot support the host's requested features
+	 * then turn off the global config parameters to disable the
+	 * feature in the driver.  This is not a fatal error.
+	 */
+	if ((phba->cfg_enable_bg) &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (phba->max_vpi && phba->cfg_enable_npiv &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (ftr_rsp) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0379 Feature Mismatch Data: x%08x %08x "
+				"x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+				mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+				phba->cfg_enable_npiv, phba->max_vpi);
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+			phba->cfg_enable_bg = 0;
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+			phba->cfg_enable_npiv = 0;
+	}
+
+	/* These SLI3 features are assumed in SLI4 */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Read the port's service parameters. */
+	lpfc_read_sparam(phba, mboxq, vport->vpi);
+	mboxq->vport = vport;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	mp = (struct lpfc_dmabuf *) mboxq->context1;
+	if (rc == MBX_SUCCESS) {
+		memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+		rc = 0;
+	}
+
+	/*
+	 * This memory was allocated by the lpfc_read_sparam routine. Release
+	 * it to the mbuf pool.
+	 */
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	mboxq->context1 = NULL;
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0382 READ_SPARAM command failed "
+				"status %d, mbxStatus x%x\n",
+				rc, bf_get(lpfc_mqe_status, mqe));
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -EIO;
+		goto out_free_vpd;
+	}
+
+	if (phba->cfg_soft_wwnn)
+		u64_to_wwn(phba->cfg_soft_wwnn,
+			   vport->fc_sparam.nodeName.u.wwn);
+	if (phba->cfg_soft_wwpn)
+		u64_to_wwn(phba->cfg_soft_wwpn,
+			   vport->fc_sparam.portName.u.wwn);
+	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+	       sizeof(struct lpfc_name));
+	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+	       sizeof(struct lpfc_name));
+
+	/* Update the fc_host data structures with new wwn. */
+	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+	/* Register SGL pool to the device using non-embedded mailbox command */
+	rc = lpfc_sli4_post_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0582 Error %d during sgl post operation", rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Register SCSI SGL pool to the device */
+	rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0383 Error %d during scsi sgl post opeation",
+				rc);
+		/* Some Scsi buffers were moved to the abort scsi list */
+		/* A pci function reset will repost them */
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+
+	/* Post the rpi header region to the device. */
+	rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0393 Error %d during rpi post operation\n",
+				rc);
+		rc = -ENODEV;
+		goto out_free_vpd;
+	}
+	/* Temporary initialization of lpfc_fip_flag to non-fip */
+	bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+	/* Set up all the queues to the device */
+	rc = lpfc_sli4_queue_setup(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0381 Error %d during queue setup.\n ", rc);
+		goto out_stop_timers;
+	}
+
+	/* Arm the CQs and then EQs on device */
+	lpfc_sli4_arm_cqeq_intr(phba);
+
+	/* Indicate device interrupt mode */
+	phba->sli4_hba.intr_enable = 1;
+
+	/* Allow asynchronous mailbox command to go through */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Post receive buffers to the device */
+	lpfc_sli4_rb_setup(phba);
+
+	/* Start the ELS watchdog timer */
+	/*
+	 * The driver for SLI4 is not yet ready to process timeouts
+	 * or interrupts.  Once it is, the comment bars can be removed.
+	 */
+	/* mod_timer(&vport->els_tmofunc,
+	 *           jiffies + HZ * (phba->fc_ratov*2)); */
+
+	/* Start heart beat timer */
+	mod_timer(&phba->hb_tmofunc,
+		  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+	phba->hb_outstanding = 0;
+	phba->last_completion_time = jiffies;
+
+	/* Start error attention (ERATT) polling timer */
+	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+	/*
+	 * The port is ready, set the host's link state to LINK_DOWN
+	 * in preparation for link interrupts.
+	 */
+	lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+	mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	lpfc_set_loopback_flag(phba);
+	/* Change driver state to LPFC_LINK_DOWN right before init link */
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_LINK_DOWN;
+	spin_unlock_irq(&phba->hbalock);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (unlikely(rc != MBX_NOT_FINISHED)) {
+		kfree(vpd);
+		return 0;
+	} else
+		rc = -EIO;
+
+	/* Unset all the queues set up in this routine when error out */
+	if (rc)
+		lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+	if (rc)
+		lpfc_stop_hba_timers(phba);
+out_free_vpd:
+	kfree(vpd);
+out_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
 
 /**
  * lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3244,7 +4608,7 @@ void
 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 {
 	LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
-	MAILBOX_t *mb = &pmbox->mb;
+	MAILBOX_t *mb = &pmbox->u.mb;
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 
@@ -3281,7 +4645,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->pport->work_port_lock);
 	spin_lock_irq(&phba->hbalock);
 	phba->link_state = LPFC_LINK_UNKNOWN;
-	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
 	pring = &psli->ring[psli->fcp_ring];
@@ -3289,32 +4653,20 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0345 Resetting board due to mailbox timeout\n");
-	/*
-	 * lpfc_offline calls lpfc_sli_hba_down which will clean up
-	 * on oustanding mailbox commands.
-	 */
-	/* If resets are disabled then set error state and return. */
-	if (!phba->cfg_enable_hba_reset) {
-		phba->link_state = LPFC_HBA_ERROR;
-		return;
-	}
-	lpfc_offline_prep(phba);
-	lpfc_offline(phba);
-	lpfc_sli_brdrestart(phba);
-	lpfc_online(phba);
-	lpfc_unblock_mgmt_io(phba);
-	return;
+
+	/* Reset the HBA device */
+	lpfc_reset_hba(phba);
 }
 
 /**
- * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
  * @phba: Pointer to HBA context object.
  * @pmbox: Pointer to mailbox object.
  * @flag: Flag indicating how the mailbox need to be processed.
  *
  * This function is called by discovery code and HBA management code
- * to submit a mailbox command to firmware. This function gets the
- * hbalock to protect the data structures.
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
  * The mailbox command can be submitted in polling mode, in which case
  * this function will wait in a polling loop for the completion of the
  * mailbox.
@@ -3332,8 +4684,9 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
  * return codes the caller owns the mailbox command after the return of
  * the function.
  **/
-int
-lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+		       uint32_t flag)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli = &phba->sli;
@@ -3349,6 +4702,10 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 	spin_lock_irqsave(&phba->hbalock, drvr_flag);
 	if (!pmbox) {
 		/* processing mbox queue from intr_handler */
+		if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			return MBX_SUCCESS;
+		}
 		processing_queue = 1;
 		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 		pmbox = lpfc_mbox_get(phba);
@@ -3365,7 +4722,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 			lpfc_printf_log(phba, KERN_ERR,
 					LOG_MBOX | LOG_VPORT,
 					"1806 Mbox x%x failed. No vport\n",
-					pmbox->mb.mbxCommand);
+					pmbox->u.mb.mbxCommand);
 			dump_stack();
 			goto out_not_finished;
 		}
@@ -3385,21 +4742,29 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 	psli = &phba->sli;
 
-	mb = &pmbox->mb;
+	mb = &pmbox->u.mb;
 	status = MBX_SUCCESS;
 
 	if (phba->link_state == LPFC_HBA_ERROR) {
 		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 
 		/* Mbox command <mbxCommand> cannot issue */
-		LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):0311 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
 		goto out_not_finished;
 	}
 
 	if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
 	    !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
 		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
-		LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2528 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
 		goto out_not_finished;
 	}
 
@@ -3413,14 +4778,24 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2529 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 
-		if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2530 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 
@@ -3462,12 +4837,17 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 	/* If we are not polling, we MUST be in SLI2 mode */
 	if (flag != MBX_POLL) {
-		if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
 		    (mb->mbxCommand != MBX_KILL_BOARD)) {
 			psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
 			/* Mbox command <mbxCommand> cannot issue */
-			LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2531 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
 			goto out_not_finished;
 		}
 		/* timeout active mbox command */
@@ -3506,7 +4886,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 	/* next set own bit for the adapter and copy over command word */
 	mb->mbxOwner = OWN_CHIP;
 
-	if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 		/* First copy command data to host SLIM area */
 		lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
 	} else {
@@ -3529,7 +4909,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 		if (mb->mbxCommand == MBX_CONFIG_PORT) {
 			/* switch over to host mailbox */
-			psli->sli_flag |= LPFC_SLI2_ACTIVE;
+			psli->sli_flag |= LPFC_SLI_ACTIVE;
 		}
 	}
 
@@ -3552,7 +4932,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 		writel(CA_MBATT, phba->CAregaddr);
 		readl(phba->CAregaddr); /* flush */
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* First read mbox status word */
 			word0 = *((uint32_t *)phba->mbox);
 			word0 = le32_to_cpu(word0);
@@ -3591,7 +4971,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 				spin_lock_irqsave(&phba->hbalock, drvr_flag);
 			}
 
-			if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+			if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 				/* First copy command data */
 				word0 = *((uint32_t *)phba->mbox);
 				word0 = le32_to_cpu(word0);
@@ -3604,7 +4984,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 					if (((slimword0 & OWN_CHIP) != OWN_CHIP)
 					    && slimmb->mbxStatus) {
 						psli->sli_flag &=
-						    ~LPFC_SLI2_ACTIVE;
+						    ~LPFC_SLI_ACTIVE;
 						word0 = slimword0;
 					}
 				}
@@ -3616,7 +4996,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 			ha_copy = readl(phba->HAregaddr);
 		}
 
-		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* copy results back to user */
 			lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
 		} else {
@@ -3643,13 +5023,420 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 
 out_not_finished:
 	if (processing_queue) {
-		pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+		pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
 		lpfc_mbox_cmpl_put(phba, pmbox);
 	}
 	return MBX_NOT_FINISHED;
 }
 
 /**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port.  The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ *	MBX_SUCCESS - mailbox posted successfully
+ *	Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	int rc = MBX_SUCCESS;
+	unsigned long iflag;
+	uint32_t db_ready;
+	uint32_t mcqe_status;
+	uint32_t mbx_cmnd;
+	unsigned long timeout;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mqe *mb = &mboxq->u.mqe;
+	struct lpfc_bmbx_create *mbox_rgn;
+	struct dma_address *dma_address;
+	struct lpfc_register bmbx_reg;
+
+	/*
+	 * Only one mailbox can be active to the bootstrap mailbox region
+	 * at a time and there is no queueing provided.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2532 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_POLL);
+		return MBXERR_ERROR;
+	}
+	/* The server grabs the token and owns it until release */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/*
+	 * Initialize the bootstrap memory region to avoid stale data areas
+	 * in the mailbox post.  Then copy the caller's mailbox contents to
+	 * the bmbx mailbox region.
+	 */
+	mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+	memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+	lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+			      sizeof(struct lpfc_mqe));
+
+	/* Post the high mailbox dma address to the port and wait for ready. */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/* Post the low mailbox dma address to the port. */
+	writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+				   * 1000) + jiffies;
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout)) {
+			rc = MBXERR_ERROR;
+			goto exit;
+		}
+	} while (!db_ready);
+
+	/*
+	 * Read the CQ to ensure the mailbox has completed.
+	 * If so, update the mailbox status so that the upper layers
+	 * can complete the request normally.
+	 */
+	lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+			      sizeof(struct lpfc_mqe));
+	mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+	lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+			      sizeof(struct lpfc_mcqe));
+	mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+	/* Prefix the mailbox status with range x4000 to note SLI4 status. */
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+		bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+		rc = MBXERR_ERROR;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+			" x%x x%x CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			bf_get(lpfc_mqe_status, mb),
+			mb->un.mb_words[0], mb->un.mb_words[1],
+			mb->un.mb_words[2], mb->un.mb_words[3],
+			mb->un.mb_words[4], mb->un.mb_words[5],
+			mb->un.mb_words[6], mb->un.mb_words[7],
+			mb->un.mb_words[8], mb->un.mb_words[9],
+			mb->un.mb_words[10], mb->un.mb_words[11],
+			mb->un.mb_words[12], mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+exit:
+	/* We are holding the token, no needed for lock when release */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		       uint32_t flag)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	unsigned long iflags;
+	int rc;
+
+	/* Detect polling mode and jump to a handler */
+	if (!phba->sli4_hba.intr_enable) {
+		if (flag == MBX_POLL)
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+		else
+			rc = -EIO;
+		if (rc != MBX_SUCCESS)
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"(%d):2541 Mailbox command x%x "
+					"(x%x) cannot issue Data: x%x x%x\n",
+					mboxq->vport ? mboxq->vport->vpi : 0,
+					mboxq->u.mb.mbxCommand,
+					lpfc_sli4_mbox_opcode_get(phba, mboxq),
+					psli->sli_flag, flag);
+		return rc;
+	} else if (flag == MBX_POLL) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2542 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		return -EIO;
+	}
+
+	/* Now, interrupt mode asynchrous mailbox command */
+	rc = lpfc_mbox_cmd_check(phba, mboxq);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2543 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2544 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	/* Put the mailbox command to the driver internal FIFO */
+	psli->slistat.mbox_busy++;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	lpfc_mbox_put(phba, mboxq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0354 Mbox cmd issue - Enqueue Data: "
+			"x%x (x%x) x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+			bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state,
+			psli->sli_flag, MBX_NOWAIT);
+	/* Wake up worker thread to transport mailbox command from head */
+	lpfc_worker_wake_up(phba);
+
+	return MBX_BUSY;
+
+out_not_finished:
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mboxq;
+	int rc = MBX_SUCCESS;
+	unsigned long iflags;
+	struct lpfc_mqe *mqe;
+	uint32_t mbx_cmnd;
+
+	/* Check interrupt mode before post async mailbox command */
+	if (unlikely(!phba->sli4_hba.intr_enable))
+		return MBX_NOT_FINISHED;
+
+	/* Check for mailbox command service token */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (unlikely(phba->sli.mbox_active)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"0384 There is pending active mailbox cmd\n");
+		return MBX_NOT_FINISHED;
+	}
+	/* Take the mailbox command service token */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+	/* Get the next mailbox command from head of queue */
+	mboxq = lpfc_mbox_get(phba);
+
+	/* If no more mailbox command waiting for post, we're done */
+	if (!mboxq) {
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_SUCCESS;
+	}
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check device readiness for posting mailbox command */
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc))
+		/* Driver clean routine will clean up pending mailbox */
+		goto out_not_finished;
+
+	/* Prepare the mbox command to be posted */
+	mqe = &mboxq->u.mqe;
+	mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+	/* Start timer for the mbox_tmo and log some mailbox post messages */
+	mod_timer(&psli->mbox_tmo, (jiffies +
+		  (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+			"x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+			lpfc_sli4_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state, psli->sli_flag);
+
+	if (mbx_cmnd != MBX_HEARTBEAT) {
+		if (mboxq->vport) {
+			lpfc_debugfs_disc_trc(mboxq->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Send vport: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		} else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Send: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		}
+	}
+	psli->slistat.mbox_cmd++;
+
+	/* Post the mailbox command to the port */
+	rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+				"(%d):2533 Mailbox command x%x (x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli4_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_NOWAIT);
+		goto out_not_finished;
+	}
+
+	return rc;
+
+out_not_finished:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+	__lpfc_mbox_cmpl_put(phba, mboxq);
+	/* Release the token */
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+	return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s3;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s4;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1420 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	return 0;
+}
+
+/**
  * __lpfc_sli_ringtx_put - Add an iocb to the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -3701,35 +5488,34 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
+ * @ring_number: SLI ring number to issue iocb on.
  * @piocb: Pointer to command iocb.
  * @flag: Flag indicating if this command can be put into txq.
  *
- * __lpfc_sli_issue_iocb is used by other functions in the driver
- * to issue an iocb command to the HBA. If the PCI slot is recovering
- * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT
- * flag is turned on, the function returns IOCB_ERROR.
- * When the link is down, this function allows only iocbs for
- * posting buffers.
- * This function finds next available slot in the command ring and
- * posts the command to the available slot and writes the port
- * attention register to request HBA start processing new iocb.
- * If there is no slot available in the ring and
- * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the
- * txq, otherwise the function returns IOCB_BUSY.
- *
- * This function is called with hbalock held.
- * The function will return success after it successfully submit the
- * iocb to firmware or after adding to the txq.
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
  **/
 static int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
 		    struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	struct lpfc_iocbq *nextiocb;
 	IOCB_t *iocb;
+	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
 
 	if (piocb->iocb_cmpl && (!piocb->vport) &&
 	   (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
@@ -3833,6 +5619,498 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	return IOCB_BUSY;
 }
 
+/**
+ * lpfc_sli4_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @sglq: Pointer to the scatter gather queue object.
+ *
+ * This routine converts the bpl or bde that is in the IOCB
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the IOCB contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the IOCB contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The IOCB is still in cpu endianess so the contents of
+ * the bpl can be used without byte swapping.
+ *
+ * Returns valid XRI = Success, NO_XRI = Failure.
+**/
+static uint16_t
+lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
+		struct lpfc_sglq *sglq)
+{
+	uint16_t xritag = NO_XRI;
+	struct ulp_bde64 *bpl = NULL;
+	struct ulp_bde64 bde;
+	struct sli4_sge *sgl  = NULL;
+	IOCB_t *icmd;
+	int numBdes = 0;
+	int i = 0;
+
+	if (!piocbq || !sglq)
+		return xritag;
+
+	sgl  = (struct sli4_sge *)sglq->sgl;
+	icmd = &piocbq->iocb;
+	if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+		numBdes = icmd->un.genreq64.bdl.bdeSize /
+				sizeof(struct ulp_bde64);
+		/* The addrHigh and addrLow fields within the IOCB
+		 * have not been byteswapped yet so there is no
+		 * need to swap them back.
+		 */
+		bpl  = (struct ulp_bde64 *)
+			((struct lpfc_dmabuf *)piocbq->context3)->virt;
+
+		if (!bpl)
+			return xritag;
+
+		for (i = 0; i < numBdes; i++) {
+			/* Should already be byte swapped. */
+			sgl->addr_hi =  bpl->addrHigh;
+			sgl->addr_lo =  bpl->addrLow;
+			/* swap the size field back to the cpu so we
+			 * can assign it to the sgl.
+			 */
+			bde.tus.w  = le32_to_cpu(bpl->tus.w);
+			bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+			if ((i+1) == numBdes)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+			bpl++;
+			sgl++;
+		}
+	} else if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BDE_64) {
+			/* The addrHigh and addrLow fields of the BDE have not
+			 * been byteswapped yet so they need to be swapped
+			 * before putting them in the sgl.
+			 */
+			sgl->addr_hi =
+				cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
+			sgl->addr_lo =
+				cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
+			bf_set(lpfc_sli4_sge_len, sgl,
+				icmd->un.genreq64.bdl.bdeSize);
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			sgl->word3 = cpu_to_le32(sgl->word3);
+	}
+	return sglq->sli4_xritag;
+}
+
+/**
+ * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ *
+ * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * distribution.
+ *
+ * Return: index into SLI4 fast-path FCP queue index.
+ **/
+static uint32_t
+lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+	static uint32_t fcp_qidx;
+
+	return fcp_qidx++ % phba->cfg_fcp_wq_count;
+}
+
+/**
+ * lpfc_sli_iocb2wqe - Convert the IOCB to a work queue entry.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @wqe: Pointer to the work queue entry.
+ *
+ * This routine converts the iocb command to its Work Queue Entry
+ * equivalent. The wqe pointer should not have any fields set when
+ * this routine is called because it will memcpy over them.
+ * This routine does not set the CQ_ID or the WQEC bits in the
+ * wqe.
+ *
+ * Returns: 0 = Success, IOCB_ERROR = Failure.
+ **/
+static int
+lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
+		union lpfc_wqe *wqe)
+{
+	uint32_t payload_len = 0;
+	uint8_t ct = 0;
+	uint32_t fip;
+	uint32_t abort_tag;
+	uint8_t command_type = ELS_COMMAND_NON_FIP;
+	uint8_t cmnd;
+	uint16_t xritag;
+	struct ulp_bde64 *bpl = NULL;
+
+	fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+	/* The fcp commands will set command type */
+	if ((!(iocbq->iocb_flag &  LPFC_IO_FCP)) && (!fip))
+		command_type = ELS_COMMAND_NON_FIP;
+	else if (!(iocbq->iocb_flag &  LPFC_IO_FCP))
+		command_type = ELS_COMMAND_FIP;
+	else if (iocbq->iocb_flag &  LPFC_IO_FCP)
+		command_type = FCP_COMMAND;
+	else {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2019 Invalid cmd 0x%x\n",
+			iocbq->iocb.ulpCommand);
+		return IOCB_ERROR;
+	}
+	/* Some of the fields are in the right position already */
+	memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
+	abort_tag = (uint32_t) iocbq->iotag;
+	xritag = iocbq->sli4_xritag;
+	wqe->words[7] = 0; /* The ct field has moved so reset */
+	/* words0-2 bpl convert bde */
+	if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+		bpl  = (struct ulp_bde64 *)
+			((struct lpfc_dmabuf *)iocbq->context3)->virt;
+		if (!bpl)
+			return IOCB_ERROR;
+
+		/* Should already be byte swapped. */
+		wqe->generic.bde.addrHigh =  le32_to_cpu(bpl->addrHigh);
+		wqe->generic.bde.addrLow =  le32_to_cpu(bpl->addrLow);
+		/* swap the size field back to the cpu so we
+		 * can assign it to the sgl.
+		 */
+		wqe->generic.bde.tus.w  = le32_to_cpu(bpl->tus.w);
+		payload_len = wqe->generic.bde.tus.f.bdeSize;
+	} else
+		payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
+
+	iocbq->iocb.ulpIoTag = iocbq->iotag;
+	cmnd = iocbq->iocb.ulpCommand;
+
+	switch (iocbq->iocb.ulpCommand) {
+	case CMD_ELS_REQUEST64_CR:
+		if (!iocbq->iocb.ulpLe) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2007 Only Limited Edition cmd Format"
+				" supported 0x%x\n",
+				iocbq->iocb.ulpCommand);
+			return IOCB_ERROR;
+		}
+		wqe->els_req.payload_len = payload_len;
+		/* Els_reguest64 has a TMO */
+		bf_set(wqe_tmo, &wqe->els_req.wqe_com,
+			iocbq->iocb.ulpTimeout);
+		/* Need a VF for word 4 set the vf bit*/
+		bf_set(els_req64_vf, &wqe->els_req, 0);
+		/* And a VFID for word 12 */
+		bf_set(els_req64_vfid, &wqe->els_req, 0);
+		/*
+		 * Set ct field to 3, indicates that the context_tag field
+		 * contains the FCFI and remote N_Port_ID is
+		 * in word 5.
+		 */
+
+		ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+		bf_set(lpfc_wqe_gen_context, &wqe->generic,
+				iocbq->iocb.ulpContext);
+
+		if (iocbq->vport->fc_myDID != 0) {
+			bf_set(els_req64_sid, &wqe->els_req,
+				 iocbq->vport->fc_myDID);
+			bf_set(els_req64_sp, &wqe->els_req, 1);
+		}
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+		/* CCP CCPE PV PRI in word10 were set in the memcpy */
+	break;
+	case CMD_XMIT_SEQUENCE64_CR:
+		/* word3 iocb=io_tag32 wqe=payload_offset */
+		/* payload offset used for multilpe outstanding
+		 * sequences on the same exchange
+		 */
+		wqe->words[3] = 0;
+		/* word4 relative_offset memcpy */
+		/* word5 r_ctl/df_ctl memcpy */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+		wqe->xmit_sequence.xmit_len = payload_len;
+	break;
+	case CMD_XMIT_BCAST64_CN:
+		/* word3 iocb=iotag32 wqe=payload_len */
+		wqe->words[3] = 0; /* no definition for this in wqe */
+		/* word4 iocb=rsvd wqe=rsvd */
+		/* word5 iocb=rctl/type/df_ctl wqe=rctl/type/df_ctl memcpy */
+		/* word6 iocb=ctxt_tag/io_tag wqe=ctxt_tag/xri */
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+	break;
+	case CMD_FCP_IWRITE64_CR:
+		command_type = FCP_COMMAND_DATA_OUT;
+		/* The struct for wqe fcp_iwrite has 3 fields that are somewhat
+		 * confusing.
+		 * word3 is payload_len: byte offset to the sgl entry for the
+		 * fcp_command.
+		 * word4 is total xfer len, same as the IOCB->ulpParameter.
+		 * word5 is initial xfer len 0 = wait for xfer-ready
+		 */
+
+		/* Always wait for xfer-ready before sending data */
+		wqe->fcp_iwrite.initial_xfer_len = 0;
+		/* word 4 (xfer length) should have been set on the memcpy */
+
+	/* allow write to fall through to read */
+	case CMD_FCP_IREAD64_CR:
+		/* FCP_CMD is always the 1st sgl entry */
+		wqe->fcp_iread.payload_len =
+			payload_len + sizeof(struct fcp_rsp);
+
+		/* word 4 (xfer length) should have been set on the memcpy */
+
+		bf_set(lpfc_wqe_gen_erp, &wqe->generic,
+			iocbq->iocb.ulpFCP2Rcvy);
+		bf_set(lpfc_wqe_gen_lnk, &wqe->generic, iocbq->iocb.ulpXS);
+		/* The XC bit and the XS bit are similar. The driver never
+		 * tracked whether or not the exchange was previouslly open.
+		 * XC = Exchange create, 0 is create. 1 is already open.
+		 * XS = link cmd: 1 do not close the exchange after command.
+		 * XS = 0 close exchange when command completes.
+		 * The only time we would not set the XC bit is when the XS bit
+		 * is set and we are sending our 2nd or greater command on
+		 * this exchange.
+		 */
+
+	/* ALLOW read & write to fall through to ICMD64 */
+	case CMD_FCP_ICMND64_CR:
+		/* Always open the exchange */
+		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
+
+		wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+	break;
+	case CMD_GEN_REQUEST64_CR:
+		/* word3 command length is described as byte offset to the
+		 * rsp_data. Would always be 16, sizeof(struct sli4_sge)
+		 * sgl[0] = cmnd
+		 * sgl[1] = rsp.
+		 *
+		 */
+		wqe->gen_req.command_len = payload_len;
+		/* Word4 parameter  copied in the memcpy */
+		/* Word5 [rctl, type, df_ctl, la] copied in memcpy */
+		/* word6 context tag copied in memcpy */
+		if (iocbq->iocb.ulpCt_h  || iocbq->iocb.ulpCt_l) {
+			ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2015 Invalid CT %x command 0x%x\n",
+				ct, iocbq->iocb.ulpCommand);
+			return IOCB_ERROR;
+		}
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic, 0);
+		bf_set(wqe_tmo, &wqe->gen_req.wqe_com,
+			iocbq->iocb.ulpTimeout);
+
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		command_type = OTHER_COMMAND;
+	break;
+	case CMD_XMIT_ELS_RSP64_CX:
+		/* words0-2 BDE memcpy */
+		/* word3 iocb=iotag32 wqe=rsvd */
+		wqe->words[3] = 0;
+		/* word4 iocb=did wge=rsvd. */
+		wqe->words[4] = 0;
+		/* word5 iocb=rsvd wge=did */
+		bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+			 iocbq->iocb.un.elsreq64.remoteID);
+
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+		if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
+			bf_set(lpfc_wqe_gen_context, &wqe->generic,
+			       iocbq->vport->vpi + phba->vpi_base);
+		command_type = OTHER_COMMAND;
+	break;
+	case CMD_CLOSE_XRI_CN:
+	case CMD_ABORT_XRI_CN:
+	case CMD_ABORT_XRI_CX:
+		/* words 0-2 memcpy should be 0 rserved */
+		/* port will send abts */
+		if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+			/*
+			 * The link is down so the fw does not need to send abts
+			 * on the wire.
+			 */
+			bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+		else
+			bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+		bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+		abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+		wqe->words[5] = 0;
+		bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+			((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+		abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+		wqe->generic.abort_tag = abort_tag;
+		/*
+		 * The abort handler will send us CMD_ABORT_XRI_CN or
+		 * CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
+		 */
+		bf_set(lpfc_wqe_gen_command, &wqe->generic, CMD_ABORT_XRI_CX);
+		cmnd = CMD_ABORT_XRI_CX;
+		command_type = OTHER_COMMAND;
+		xritag = 0;
+	break;
+	case CMD_XRI_ABORTED_CX:
+	case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
+		/* words0-2 are all 0's no bde */
+		/* word3 and word4 are rsvrd */
+		wqe->words[3] = 0;
+		wqe->words[4] = 0;
+		/* word5 iocb=rsvd wge=did */
+		/* There is no remote port id in the IOCB? */
+		/* Let this fall through and fail */
+	case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
+	case CMD_FCP_TSEND64_CX: /* Target mode send xfer-ready */
+	case CMD_FCP_TRSP64_CX: /* Target mode rcv */
+	case CMD_FCP_AUTO_TRSP_CX: /* Auto target rsp */
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2014 Invalid command 0x%x\n",
+				iocbq->iocb.ulpCommand);
+		return IOCB_ERROR;
+	break;
+
+	}
+	bf_set(lpfc_wqe_gen_xri, &wqe->generic, xritag);
+	bf_set(lpfc_wqe_gen_request_tag, &wqe->generic, iocbq->iotag);
+	wqe->generic.abort_tag = abort_tag;
+	bf_set(lpfc_wqe_gen_cmd_type, &wqe->generic, command_type);
+	bf_set(lpfc_wqe_gen_command, &wqe->generic, cmnd);
+	bf_set(lpfc_wqe_gen_class, &wqe->generic, iocbq->iocb.ulpClass);
+	bf_set(lpfc_wqe_gen_cq_id, &wqe->generic, LPFC_WQE_CQ_ID_DEFAULT);
+
+	return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+			 struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_sglq *sglq;
+	uint16_t xritag;
+	union lpfc_wqe wqe;
+	struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
+	uint32_t fcp_wqidx;
+
+	if (piocb->sli4_xritag == NO_XRI) {
+		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+			piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+			sglq = NULL;
+		else {
+			sglq = __lpfc_sli_get_sglq(phba);
+			if (!sglq)
+				return IOCB_ERROR;
+			piocb->sli4_xritag = sglq->sli4_xritag;
+		}
+	} else if (piocb->iocb_flag &  LPFC_IO_FCP) {
+		sglq = NULL; /* These IO's already have an XRI and
+			      * a mapped sgl.
+			      */
+	} else {
+		/* This is a continuation of a commandi,(CX) so this
+		 * sglq is on the active list
+		 */
+		sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
+		if (!sglq)
+			return IOCB_ERROR;
+	}
+
+	if (sglq) {
+		xritag = lpfc_sli4_bpl2sgl(phba, piocb, sglq);
+		if (xritag != sglq->sli4_xritag)
+			return IOCB_ERROR;
+	}
+
+	if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+		return IOCB_ERROR;
+
+	if (piocb->iocb_flag &  LPFC_IO_FCP) {
+		fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
+		if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+			return IOCB_ERROR;
+	} else {
+		if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+			return IOCB_ERROR;
+	}
+	lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+	return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 	IOCB_ERROR - Error
+ * 	IOCB_SUCCESS - Success
+ * 	IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+		struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1419 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+		break;
+	}
+	phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+	return 0;
+}
 
 /**
  * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
@@ -3848,14 +6126,14 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
  * functions which do not hold hbalock.
  **/
 int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 		    struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	unsigned long iflags;
 	int rc;
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
+	rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 
 	return rc;
@@ -4148,6 +6426,52 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+	LIST_HEAD(completions);
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *pmb;
+	unsigned long iflag;
+
+	/* Flush all the mailbox commands in the mbox system */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* The pending mailbox command queue */
+	list_splice_init(&phba->sli.mboxq, &completions);
+	/* The outstanding active mailbox command */
+	if (psli->mbox_active) {
+		list_add_tail(&psli->mbox_active->list, &completions);
+		psli->mbox_active = NULL;
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	}
+	/* The completed mailbox command queue */
+	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+	while (!list_empty(&completions)) {
+		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+		pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		if (pmb->mbox_cmpl)
+			pmb->mbox_cmpl(phba, pmb);
+	}
+}
+
+/**
  * lpfc_sli_host_down - Vport cleanup function
  * @vport: Pointer to virtual port object.
  *
@@ -4240,9 +6564,11 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_dmabuf *buf_ptr;
-	LPFC_MBOXQ_t *pmb;
-	int i;
 	unsigned long flags = 0;
+	int i;
+
+	/* Shutdown the mailbox command sub-system */
+	lpfc_sli_mbox_sys_shutdown(phba);
 
 	lpfc_hba_down_prep(phba);
 
@@ -4287,28 +6613,42 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 
 	/* Return any active mbox cmds */
 	del_timer_sync(&psli->mbox_tmo);
-	spin_lock_irqsave(&phba->hbalock, flags);
 
-	spin_lock(&phba->pport->work_port_lock);
+	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
-	spin_unlock(&phba->pport->work_port_lock);
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
 
-	/* Return any pending or completed mbox cmds */
-	list_splice_init(&phba->sli.mboxq, &completions);
-	if (psli->mbox_active) {
-		list_add_tail(&psli->mbox_active->list, &completions);
-		psli->mbox_active = NULL;
-		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-	}
-	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
-	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return 1;
+}
+
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+	/* Stop the SLI4 device port */
+	lpfc_stop_port(phba);
+
+	/* Tear down the queues in the HBA */
+	lpfc_sli4_queue_unset(phba);
+
+	/* unregister default FCFI from the HBA */
+	lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
 
-	while (!list_empty(&completions)) {
-		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
-		pmb->mb.mbxStatus = MBX_NOT_FINISHED;
-		if (pmb->mbox_cmpl)
-			pmb->mbox_cmpl(phba,pmb);
-	}
 	return 1;
 }
 
@@ -4639,7 +6979,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	iabt = &abtsiocbp->iocb;
 	iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
 	iabt->un.acxri.abortContextTag = icmd->ulpContext;
-	iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+	else
+		iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
 	iabt->ulpLe = 1;
 	iabt->ulpClass = icmd->ulpClass;
 
@@ -4655,7 +6998,7 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			 "abort cmd iotag x%x\n",
 			 iabt->un.acxri.abortContextTag,
 			 iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
-	retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+	retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
 
 	if (retval)
 		__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -4838,7 +7181,10 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
 		cmd = &iocbq->iocb;
 		abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
 		abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
-		abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+		else
+			abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
 		abtsiocb->iocb.ulpLe = 1;
 		abtsiocb->iocb.ulpClass = cmd->ulpClass;
 		abtsiocb->vport = phba->pport;
@@ -4850,7 +7196,8 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
 
 		/* Setup callback routine and issue the command. */
 		abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
-		ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+		ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+					      abtsiocb, 0);
 		if (ret_val == IOCB_ERROR) {
 			lpfc_sli_release_iocbq(phba, abtsiocb);
 			errcnt++;
@@ -4931,7 +7278,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
  **/
 int
 lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
-			 struct lpfc_sli_ring *pring,
+			 uint32_t ring_number,
 			 struct lpfc_iocbq *piocb,
 			 struct lpfc_iocbq *prspiocbq,
 			 uint32_t timeout)
@@ -4962,7 +7309,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 		readl(phba->HCregaddr); /* flush */
 	}
 
-	retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+	retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
 	if (retval == IOCB_SUCCESS) {
 		timeout_req = timeout * HZ;
 		timeleft = wait_event_timeout(done_q,
@@ -5077,53 +7424,156 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
 }
 
 /**
- * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
  * @phba: Pointer to HBA context.
  *
- * This function is called to cleanup any pending mailbox
- * objects in the driver queue before bringing the HBA offline.
- * This function is called while resetting the HBA.
- * The function is called without any lock held. The function
- * takes hbalock to update SLI data structure.
- * This function returns 1 when there is an active mailbox
- * command pending else returns 0.
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
  **/
-int
-lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
 {
-	struct lpfc_vport *vport = phba->pport;
-	int i = 0;
-	uint32_t ha_copy;
+	struct lpfc_sli *psli = &phba->sli;
+	uint8_t actcmd = MBX_HEARTBEAT;
+	unsigned long timeout;
 
-	while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
-		if (i++ > LPFC_MBOX_TMO * 1000)
-			return 1;
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
 
-		/*
-		 * Call lpfc_sli_handle_mb_event only if a mailbox cmd
-		 * did finish. This way we won't get the misleading
-		 * "Stray Mailbox Interrupt" message.
-		 */
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 		spin_lock_irq(&phba->hbalock);
-		ha_copy = phba->work_ha;
-		phba->work_ha &= ~HA_MBATT;
+		if (phba->sli.mbox_active)
+			actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
 		spin_unlock_irq(&phba->hbalock);
+		/* Determine how long we might wait for the active mailbox
+		 * command to be gracefully completed by firmware.
+		 */
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
+					   1000) + jiffies;
+		while (phba->sli.mbox_active) {
+			/* Check active mailbox complete status every 2ms */
+			msleep(2);
+			if (time_after(jiffies, timeout))
+				/* Timeout, let the mailbox flush routine to
+				 * forcefully release active mailbox command
+				 */
+				break;
+		}
+	}
+	lpfc_sli_mbox_sys_flush(phba);
+}
+
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t ha_copy;
 
-		if (ha_copy & HA_MBATT)
-			if (lpfc_sli_handle_mb_event(phba) == 0)
-				i = 0;
+	/* Read chip Host Attention (HA) register */
+	ha_copy = readl(phba->HAregaddr);
+	if (ha_copy & HA_ERATT) {
+		/* Read host status register to retrieve error event */
+		lpfc_sli_read_hs(phba);
+
+		/* Check if there is a deferred error condition is active */
+		if ((HS_FFER1 & phba->work_hs) &&
+		    ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+		     HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag |= DEFER_ERATT;
+			spin_unlock_irq(&phba->hbalock);
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr);
+		}
 
-		msleep(1);
+		/* Set the driver HA work bitmap */
+		spin_lock_irq(&phba->hbalock);
+		phba->work_ha |= HA_ERATT;
+		/* Indicate polling handles this ERATT */
+		phba->hba_flag |= HBA_ERATT_HANDLED;
+		spin_unlock_irq(&phba->hbalock);
+		return 1;
 	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t uerr_sta_hi, uerr_sta_lo;
+	uint32_t onlnreg0, onlnreg1;
 
-	return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+	/* For now, use the SLI4 device internal unrecoverable error
+	 * registers for error attention. This can be changed later.
+	 */
+	onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+	onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+	if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+		uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+		uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+		if (uerr_sta_lo || uerr_sta_hi) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1423 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"online0_reg=0x%x, online1_reg=0x%x\n",
+					uerr_sta_lo, uerr_sta_hi,
+					onlnreg0, onlnreg1);
+			/* TEMP: as the driver error recover logic is not
+			 * fully developed, we just log the error message
+			 * and the device error attention action is now
+			 * temporarily disabled.
+			 */
+			return 0;
+			phba->work_status[0] = uerr_sta_lo;
+			phba->work_status[1] = uerr_sta_hi;
+			spin_lock_irq(&phba->hbalock);
+			/* Set the driver HA work bitmap */
+			phba->work_ha |= HA_ERATT;
+			/* Indicate polling handles this ERATT */
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			spin_unlock_irq(&phba->hbalock);
+			return 1;
+		}
+	}
+	return 0;
 }
 
 /**
  * lpfc_sli_check_eratt - check error attention events
  * @phba: Pointer to HBA context.
  *
- * This function is called form timer soft interrupt context to check HBA's
+ * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
  * This fucntion returns 1 when there is Error Attention in the Host Attention
@@ -5134,10 +7584,6 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 {
 	uint32_t ha_copy;
 
-	/* If PCI channel is offline, don't process it */
-	if (unlikely(pci_channel_offline(phba->pcidev)))
-		return 0;
-
 	/* If somebody is waiting to handle an eratt, don't process it
 	 * here. The brdkill function will do this.
 	 */
@@ -5161,56 +7607,84 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 		return 0;
 	}
 
-	/* Read chip Host Attention (HA) register */
-	ha_copy = readl(phba->HAregaddr);
-	if (ha_copy & HA_ERATT) {
-		/* Read host status register to retrieve error event */
-		lpfc_sli_read_hs(phba);
-
-		/* Check if there is a deferred error condition is active */
-		if ((HS_FFER1 & phba->work_hs) &&
-			((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
-			HS_FFER6 | HS_FFER7) & phba->work_hs)) {
-			phba->hba_flag |= DEFER_ERATT;
-			/* Clear all interrupt enable conditions */
-			writel(0, phba->HCregaddr);
-			readl(phba->HCregaddr);
-		}
-
-		/* Set the driver HA work bitmap */
-		phba->work_ha |= HA_ERATT;
-		/* Indicate polling handles this ERATT */
-		phba->hba_flag |= HBA_ERATT_HANDLED;
+	/* If PCI channel is offline, don't process it */
+	if (unlikely(pci_channel_offline(phba->pcidev))) {
 		spin_unlock_irq(&phba->hbalock);
-		return 1;
+		return 0;
+	}
+
+	switch (phba->sli_rev) {
+	case LPFC_SLI_REV2:
+	case LPFC_SLI_REV3:
+		/* Read chip Host Attention (HA) register */
+		ha_copy = lpfc_sli_eratt_read(phba);
+		break;
+	case LPFC_SLI_REV4:
+		/* Read devcie Uncoverable Error (UERR) registers */
+		ha_copy = lpfc_sli4_eratt_read(phba);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0299 Invalid SLI revision (%d)\n",
+				phba->sli_rev);
+		ha_copy = 0;
+		break;
 	}
 	spin_unlock_irq(&phba->hbalock);
+
+	return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+	/* If the pci channel is offline, ignore all the interrupts */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -EIO;
+
+	/* Update device level interrupt statistics */
+	phba->sli.slistat.sli_intr++;
+
+	/* Ignore all interrupts during initialization. */
+	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		return -EIO;
+
 	return 0;
 }
 
 /**
- * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
  * This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there are slow-path events in the HBA. However,
- * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
- * this function is called as part of the device-level interrupt handler.
- * When the PCI slot is in error recovery or the HBA is undergoing
- * initialization, the interrupt handler will not process the interrupt.
- * The link attention and ELS ring attention events are handled by the
- * worker thread. The interrupt handler signals the worker thread and
- * and returns for these events. This function is called without any
- * lock held. It gets the hbalock to access and update SLI data
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
  * structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_sp_intr_handler(int irq, void *dev_id)
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	uint32_t ha_copy;
@@ -5240,13 +7714,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 	 * individual interrupt handler in MSI-X multi-message interrupt mode
 	 */
 	if (phba->intr_type == MSIX) {
-		/* If the pci channel is offline, ignore all the interrupts */
-		if (unlikely(pci_channel_offline(phba->pcidev)))
-			return IRQ_NONE;
-		/* Update device-level interrupt statistics */
-		phba->sli.slistat.sli_intr++;
-		/* Ignore all interrupts during initialization. */
-		if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for slow-path events */
 		spin_lock_irqsave(&phba->hbalock, iflag);
@@ -5271,7 +7740,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 		 * interrupt.
 		 */
 		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
-			spin_unlock_irq(&phba->hbalock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return IRQ_NONE;
 		}
 
@@ -5364,7 +7833,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 
 		if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
 			pmb = phba->sli.mbox_active;
-			pmbox = &pmb->mb;
+			pmbox = &pmb->u.mb;
 			mbox = phba->mbox;
 			vport = pmb->vport;
 
@@ -5434,7 +7903,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 							LOG_MBOX | LOG_SLI,
 							"0350 rc should have"
 							"been MBX_BUSY");
-						goto send_current_mbox;
+						if (rc != MBX_NOT_FINISHED)
+							goto send_current_mbox;
 					}
 				}
 				spin_lock_irqsave(
@@ -5471,29 +7941,29 @@ send_current_mbox:
 	}
 	return IRQ_HANDLED;
 
-} /* lpfc_sp_intr_handler */
+} /* lpfc_sli_sp_intr_handler */
 
 /**
- * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
  * This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there is a fast-path FCP IOCB ring event in the
- * HBA. However, when the device is enabled with either MSI or Pin-IRQ
- * interrupt mode, this function is called as part of the device-level
- * interrupt handler. When the PCI slot is in error recovery or the HBA
- * is undergoing initialization, the interrupt handler will not process
- * the interrupt. The SCSI FCP fast-path ring event are handled in the
- * intrrupt context. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_fp_intr_handler(int irq, void *dev_id)
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	uint32_t ha_copy;
@@ -5513,13 +7983,8 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 	 * individual interrupt handler in MSI-X multi-message interrupt mode
 	 */
 	if (phba->intr_type == MSIX) {
-		/* If pci channel is offline, ignore all the interrupts */
-		if (unlikely(pci_channel_offline(phba->pcidev)))
-			return IRQ_NONE;
-		/* Update device-level interrupt statistics */
-		phba->sli.slistat.sli_intr++;
-		/* Ignore all interrupts during initialization. */
-		if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for FCP ring and other ring events */
 		ha_copy = readl(phba->HAregaddr);
@@ -5530,7 +7995,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 		 * any interrupt.
 		 */
 		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
-			spin_unlock_irq(&phba->hbalock);
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			return IRQ_NONE;
 		}
 		writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
@@ -5566,26 +8031,27 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 		}
 	}
 	return IRQ_HANDLED;
-}  /* lpfc_fp_intr_handler */
+}  /* lpfc_sli_fp_intr_handler */
 
 /**
- * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
- * This function is the device-level interrupt handler called from the PCI
- * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
- * an event in the HBA which requires driver attention. This function
- * invokes the slow-path interrupt attention handling function and fast-path
- * interrupt attention handling function in turn to process the relevant
- * HBA attention events. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
  *
  * This function returns IRQ_HANDLED when interrupt is handled, else it
  * returns IRQ_NONE.
  **/
 irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sli_intr_handler(int irq, void *dev_id)
 {
 	struct lpfc_hba  *phba;
 	irqreturn_t sp_irq_rc, fp_irq_rc;
@@ -5600,15 +8066,8 @@ lpfc_intr_handler(int irq, void *dev_id)
 	if (unlikely(!phba))
 		return IRQ_NONE;
 
-	/* If the pci channel is offline, ignore all the interrupts. */
-	if (unlikely(pci_channel_offline(phba->pcidev)))
-		return IRQ_NONE;
-
-	/* Update device level interrupt statistics */
-	phba->sli.slistat.sli_intr++;
-
-	/* Ignore all interrupts during initialization. */
-	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+	/* Check device state for handling interrupt */
+	if (lpfc_intr_state_check(phba))
 		return IRQ_NONE;
 
 	spin_lock(&phba->hbalock);
@@ -5650,7 +8109,7 @@ lpfc_intr_handler(int irq, void *dev_id)
 	status2 >>= (4*LPFC_ELS_RING);
 
 	if (status1 || (status2 & HA_RXMASK))
-		sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+		sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
 	else
 		sp_irq_rc = IRQ_NONE;
 
@@ -5670,10 +8129,3322 @@ lpfc_intr_handler(int irq, void *dev_id)
 		status2 = 0;
 
 	if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
-		fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+		fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
 	else
 		fp_irq_rc = IRQ_NONE;
 
 	/* Return device-level interrupt handling status */
 	return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
-}  /* lpfc_intr_handler */
+}  /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_fcp_xri_abort_event_proc - Process fcp xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 FCP abort XRI events.
+ **/
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the fcp xri abort event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~FCP_XRI_ABORT_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the fcp xri abort events */
+	while (!list_empty(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Notify aborted XRI for FCP work queue */
+		lpfc_sli4_fcp_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* First, declare the els xri abort event has been handled */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+	spin_unlock_irq(&phba->hbalock);
+	/* Now, handle all the els xri abort events */
+	while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		spin_lock_irq(&phba->hbalock);
+		list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irq(&phba->hbalock);
+		/* Notify aborted XRI for ELS work queue */
+		lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+	}
+}
+
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+			      struct lpfc_iocbq *pIocbOut,
+			      struct lpfc_wcqe_complete *wcqe)
+{
+	size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+	memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+	       sizeof(struct lpfc_iocbq) - offset);
+	memset(&pIocbIn->sli4_info, 0,
+	       sizeof(struct lpfc_sli4_rspiocb_info));
+	/* Map WCQE parameters into irspiocb parameters */
+	pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+	if (pIocbOut->iocb_flag & LPFC_IO_FCP)
+		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+			pIocbIn->iocb.un.fcpi.fcpi_parm =
+					pIocbOut->iocb.un.fcpi.fcpi_parm -
+					wcqe->total_data_placed;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	else
+		pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	/* Load in additional WCQE parameters */
+	pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
+	pIocbIn->sli4_info.bfield = 0;
+	if (bf_get(lpfc_wcqe_c_xb, wcqe))
+		pIocbIn->sli4_info.bfield |= LPFC_XB;
+	if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
+		pIocbIn->sli4_info.bfield |= LPFC_PV;
+		pIocbIn->sli4_info.priority =
+					bf_get(lpfc_wcqe_c_priority, wcqe);
+	}
+}
+
+/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchrous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0392 Async Event: word0:x%x, word1:x%x, "
+			"word2:x%x, word3:x%x\n", mcqe->word0,
+			mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0394 Failed to allocate CQ_EVENT entry\n");
+		return false;
+	}
+
+	/* Move the CQE into an asynchronous event entry */
+	memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe));
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+	/* Set the async event flag */
+	phba->hba_flag |= ASYNC_EVENT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	uint32_t mcqe_status;
+	MAILBOX_t *mbox, *pmbox;
+	struct lpfc_mqe *mqe;
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *mp;
+	unsigned long iflags;
+	LPFC_MBOXQ_t *pmb;
+	bool workposted = false;
+	int rc;
+
+	/* If not a mailbox complete MCQE, out by checking mailbox consume */
+	if (!bf_get(lpfc_trailer_completed, mcqe))
+		goto out_no_mqe_complete;
+
+	/* Get the reference to the active mbox command */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pmb = phba->sli.mbox_active;
+	if (unlikely(!pmb)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"1832 No pending MBOX command to handle\n");
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		goto out_no_mqe_complete;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	mqe = &pmb->u.mqe;
+	pmbox = (MAILBOX_t *)&pmb->u.mqe;
+	mbox = phba->mbox;
+	vport = pmb->vport;
+
+	/* Reset heartbeat timer */
+	phba->last_completion_time = jiffies;
+	del_timer(&phba->sli.mbox_tmo);
+
+	/* Move mbox data to caller's mailbox region, do endian swapping */
+	if (pmb->mbox_cmpl && mbox)
+		lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+	/* Set the mailbox status with SLI4 range 0x4000 */
+	mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS)
+		bf_set(lpfc_mqe_status, mqe,
+		       (LPFC_MBX_ERROR_RANGE | mcqe_status));
+
+	if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+		pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+				      "MBOX dflt rpi: status:x%x rpi:x%x",
+				      mcqe_status,
+				      pmbox->un.varWords[0], 0);
+		if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+			mp = (struct lpfc_dmabuf *)(pmb->context1);
+			ndlp = (struct lpfc_nodelist *)pmb->context2;
+			/* Reg_LOGIN of dflt RPI was successful. Now lets get
+			 * RID of the PPI using the same mbox buffer.
+			 */
+			lpfc_unreg_login(phba, vport->vpi,
+					 pmbox->un.varWords[0], pmb);
+			pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+			pmb->context1 = mp;
+			pmb->context2 = ndlp;
+			pmb->vport = vport;
+			rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+			if (rc != MBX_BUSY)
+				lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
+						LOG_SLI, "0385 rc should "
+						"have been MBX_BUSY\n");
+			if (rc != MBX_NOT_FINISHED)
+				goto send_current_mbox;
+		}
+	}
+	spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+	/* There is mailbox completion work to do */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_mbox_cmpl_put(phba, pmb);
+	phba->work_ha |= HA_MBATT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+send_current_mbox:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Release the mailbox command posting token */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	/* Setting active mailbox pointer need to be in sync to flag clear */
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	/* Wake up worker thread to post the next pending mailbox command */
+	lpfc_worker_wake_up(phba);
+out_no_mqe_complete:
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchrous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+	struct lpfc_mcqe mcqe;
+	bool workposted;
+
+	/* Copy the mailbox MCQE and convert endian order as needed */
+	lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+	/* Invoke the proper event handling routine */
+	if (!bf_get(lpfc_trailer_async, &mcqe))
+		workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+	else
+		workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflags;
+	bool workposted = false;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pring->stats.iocb_event++;
+	/* Look up the ELS command IOCB and create pseudo response IOCB */
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0386 ELS complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return workposted;
+	}
+
+	/* Fake the irspiocbq and copy necessary response information */
+	irspiocbq = lpfc_sli_get_iocbq(phba);
+	if (!irspiocbq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0387 Failed to allocate an iocbq\n");
+		return workposted;
+	}
+	lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+	/* Add the irspiocb to the response IOCB work list */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
+	/* Indicate ELS ring attention */
+	phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	/* Check for the slow-path ELS work queue */
+	if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+		lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+				     bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+	else
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2579 Slow-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+				bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+				phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+				   struct lpfc_queue *cq,
+				   struct sli4_wcqe_xri_aborted *wcqe)
+{
+	bool workposted = false;
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0602 Failed to allocate CQ_EVENT entry\n");
+		return false;
+	}
+
+	/* Move the CQE into the proper xri abort event list */
+	memcpy(&cq_event->cqe, wcqe, sizeof(struct sli4_wcqe_xri_aborted));
+	switch (cq->subtype) {
+	case LPFC_FCP:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+		/* Set the fcp xri abort event flag */
+		phba->hba_flag |= FCP_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case LPFC_ELS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+		/* Set the els xri abort event flag */
+		phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0603 Invalid work queue CQE subtype (x%x)\n",
+				cq->subtype);
+		workposted = false;
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_complete wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ complete event */
+		workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+					(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_sp_handle_rel_wcqe(phba,
+					(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+					(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0388 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+	struct lpfc_rcqe rcqe;
+	bool workposted = false;
+	struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+	struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+	struct hbq_dmabuf *dma_buf;
+	uint32_t status;
+	unsigned long iflags;
+
+	/* Copy the receive queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
+	lpfc_sli4_rq_release(hrq, drq);
+	if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
+		goto out;
+	if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+		goto out;
+
+	status = bf_get(lpfc_rcqe_status, &rcqe);
+	switch (status) {
+	case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2537 Receive Frame Truncated!!\n");
+	case FC_STATUS_RQ_SUCCESS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+		if (!dma_buf) {
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			goto out;
+		}
+		memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+		/* save off the frame for the word thread to process */
+		list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+		/* Frame received */
+		phba->hba_flag |= HBA_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case FC_STATUS_INSUFF_BUF_NEED_BUF:
+	case FC_STATUS_INSUFF_BUF_FRM_DISC:
+		/* Post more buffers if possible */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	}
+out:
+	return workposted;
+
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
+{
+	struct lpfc_queue *cq = NULL, *childq, *speq;
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	int ecount = 0;
+	uint16_t cqid;
+
+	if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
+	    bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0359 Not a valid slow-path completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get(lpfc_eqe_major_code, eqe),
+				bf_get(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get(lpfc_eqe_resource_id, eqe);
+
+	/* Search for completion queue pointer matching this cqid */
+	speq = phba->sli4_hba.sp_eq;
+	list_for_each_entry(childq, &speq->child_list, list) {
+		if (childq->queue_id == cqid) {
+			cq = childq;
+			break;
+		}
+	}
+	if (unlikely(!cq)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0365 Slow-path CQ identifier (%d) does "
+				"not exist\n", cqid);
+		return;
+	}
+
+	/* Process all the entries to the CQ */
+	switch (cq->type) {
+	case LPFC_MCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	case LPFC_WCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	case LPFC_RCQ:
+		while ((cqe = lpfc_sli4_cq_get(cq))) {
+			workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+			if (!(++ecount % LPFC_GET_QE_REL_INT))
+				lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+		}
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0370 Invalid completion queue type (%d)\n",
+				cq->type);
+		return;
+	}
+
+	/* Catch the no cq entry condition, log an error */
+	if (unlikely(ecount == 0))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0371 No entry from the CQ: identifier "
+				"(x%x), type (%d)\n", cq->queue_id, cq->type);
+
+	/* In any case, flash and re-arm the RCQ */
+	lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_FCP_RING];
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq irspiocbq;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pring->stats.iocb_event++;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check for response status */
+	if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+		/* If resource errors reported from HBA, reduce queue
+		 * depth of the SCSI device.
+		 */
+		if ((bf_get(lpfc_wcqe_c_status, wcqe) ==
+		     IOSTAT_LOCAL_REJECT) &&
+		    (wcqe->parameter == IOERR_NO_RESOURCES)) {
+			phba->lpfc_rampdown_queue_depth(phba);
+		}
+		/* Log the error status */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0373 FCP complete error: status=x%x, "
+				"hw_status=x%x, total_data_specified=%d, "
+				"parameter=x%x, word3=x%x\n",
+				bf_get(lpfc_wcqe_c_status, wcqe),
+				bf_get(lpfc_wcqe_c_hw_status, wcqe),
+				wcqe->total_data_placed, wcqe->parameter,
+				wcqe->word3);
+	}
+
+	/* Look up the FCP command IOCB and create pseudo response IOCB */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0374 FCP complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+	if (unlikely(!cmdiocbq->iocb_cmpl)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0375 FCP cmdiocb not callback function "
+				"iotag: (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+
+	/* Fake the irspiocb and copy necessary response information */
+	lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+
+	/* Pass the cmd_iocb and the rsp state to the upper layer */
+	(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	struct lpfc_queue *childwq;
+	bool wqid_matched = false;
+	uint16_t fcp_wqid;
+
+	/* Check for fast-path FCP work queue release */
+	fcp_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+	list_for_each_entry(childwq, &cq->child_list, list) {
+		if (childwq->queue_id == fcp_wqid) {
+			lpfc_sli4_wq_release(childwq,
+					bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+			wqid_matched = true;
+			break;
+		}
+	}
+	/* Report warning log message if no match found */
+	if (wqid_matched != true)
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2580 Fast-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x\n", fcp_wqid);
+}
+
+/**
+ * lpfc_sli4_fp_handle_wcqe - Process fast-path work queue completion entry
+ * @cq: Pointer to the completion queue.
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static int
+lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_release wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ complete event */
+		lpfc_sli4_fp_handle_fcp_wcqe(phba,
+				(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+				(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+				(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0144 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+			uint32_t fcp_cqidx)
+{
+	struct lpfc_queue *cq;
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	uint16_t cqid;
+	int ecount = 0;
+
+	if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
+	    unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0366 Not a valid fast-path completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get(lpfc_eqe_major_code, eqe),
+				bf_get(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
+	if (unlikely(!cq)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0367 Fast-path completion queue does not "
+				"exist\n");
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get(lpfc_eqe_resource_id, eqe);
+	if (unlikely(cqid != cq->queue_id)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0368 Miss-matched fast-path completion "
+				"queue identifier: eqcqid=%d, fcpcqid=%d\n",
+				cqid, cq->queue_id);
+		return;
+	}
+
+	/* Process all the entries to the CQ */
+	while ((cqe = lpfc_sli4_cq_get(cq))) {
+		workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Catch the no cq entry condition */
+	if (unlikely(ecount == 0))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0369 No entry from fast-path completion "
+				"queue fcpcqid=%d\n", cq->queue_id);
+
+	/* In any case, flash and re-arm the CQ */
+	lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+static void
+lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	struct lpfc_eqe *eqe;
+
+	/* walk all the EQ entries and drop on the floor */
+	while ((eqe = lpfc_sli4_eq_get(eq)))
+		;
+
+	/* Clear and re-arm the EQ */
+	lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_sp_intr_handler - Slow-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA is
+ * undergoing initialization, the interrupt handler will not process the
+ * interrupt. The link attention and ELS ring attention events are handled
+ * by the worker thread. The interrupt handler signals the worker thread
+ * and returns for these events. This function is called without any lock
+ * held. It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_sp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_queue *speq;
+	struct lpfc_eqe *eqe;
+	unsigned long iflag;
+	int ecount = 0;
+
+	/*
+	 * Get the driver's phba structure from the dev_id
+	 */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	speq = phba->sli4_hba.sp_eq;
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eq_flush(phba, speq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Process all the event on FCP slow-path EQ
+	 */
+	while ((eqe = lpfc_sli4_eq_get(speq))) {
+		lpfc_sli4_sp_handle_eqe(phba, eqe);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_eq_release(speq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Always clear and re-arm the slow-path EQ */
+	lpfc_sli4_eq_release(speq, LPFC_QUEUE_REARM);
+
+	/* Catch the no cq entry condition */
+	if (unlikely(ecount == 0)) {
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0357 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_sp_intr_handler */
+
+/**
+ * lpfc_sli4_fp_intr_handler - Fast-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures. Note that,
+ * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is
+ * equal to that of FCP CQ index.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_fp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl;
+	struct lpfc_queue *fpeq;
+	struct lpfc_eqe *eqe;
+	unsigned long iflag;
+	int ecount = 0;
+	uint32_t fcp_eqidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	fcp_eq_hdl = (struct lpfc_fcp_eq_hdl *)dev_id;
+	phba = fcp_eq_hdl->phba;
+	fcp_eqidx = fcp_eq_hdl->idx;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	fpeq = phba->sli4_hba.fp_eq[fcp_eqidx];
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eq_flush(phba, fpeq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Process all the event on FCP fast-path EQ
+	 */
+	while ((eqe = lpfc_sli4_eq_get(fpeq))) {
+		lpfc_sli4_fp_handle_eqe(phba, eqe, fcp_eqidx);
+		if (!(++ecount % LPFC_GET_QE_REL_INT))
+			lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
+	}
+
+	/* Always clear and re-arm the fast-path EQ */
+	lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+
+	if (unlikely(ecount == 0)) {
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0358 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_fp_intr_handler */
+
+/**
+ * lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler to device with SLI-4
+ * interface spec, called from the PCI layer when either MSI or Pin-IRQ
+ * interrupt mode is enabled and there is an event in the HBA which requires
+ * driver attention. This function invokes the slow-path interrupt attention
+ * handling function and fast-path interrupt attention handling function in
+ * turn to process the relevant HBA attention events. This function is called
+ * without any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	irqreturn_t sp_irq_rc, fp_irq_rc;
+	bool fp_handled = false;
+	uint32_t fcp_eqidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/*
+	 * Invokes slow-path host attention interrupt handling as appropriate.
+	 */
+	sp_irq_rc = lpfc_sli4_sp_intr_handler(irq, dev_id);
+
+	/*
+	 * Invoke fast-path host attention interrupt handling as appropriate.
+	 */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+		fp_irq_rc = lpfc_sli4_fp_intr_handler(irq,
+					&phba->sli4_hba.fcp_eq_hdl[fcp_eqidx]);
+		if (fp_irq_rc == IRQ_HANDLED)
+			fp_handled |= true;
+	}
+
+	return (fp_handled == true) ? IRQ_HANDLED : sp_irq_rc;
+} /* lpfc_sli4_intr_handler */
+
+/**
+ * lpfc_sli4_queue_free - free a queue structure and associated memory
+ * @queue: The queue structure to free.
+ *
+ * This function frees a queue structure and the DMAable memeory used for
+ * the host resident queue. This function must be called after destroying the
+ * queue on the HBA.
+ **/
+void
+lpfc_sli4_queue_free(struct lpfc_queue *queue)
+{
+	struct lpfc_dmabuf *dmabuf;
+
+	if (!queue)
+		return;
+
+	while (!list_empty(&queue->page_list)) {
+		list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
+				 list);
+		dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE,
+				  dmabuf->virt, dmabuf->phys);
+		kfree(dmabuf);
+	}
+	kfree(queue);
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_alloc - Allocate and initialize a queue structure
+ * @phba: The HBA that this queue is being created on.
+ * @entry_size: The size of each queue entry for this queue.
+ * @entry count: The number of entries that this queue will handle.
+ *
+ * This function allocates a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called before creating the
+ * queue on the HBA.
+ **/
+struct lpfc_queue *
+lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
+		      uint32_t entry_count)
+{
+	struct lpfc_queue *queue;
+	struct lpfc_dmabuf *dmabuf;
+	int x, total_qe_count;
+	void *dma_pointer;
+
+
+	queue = kzalloc(sizeof(struct lpfc_queue) +
+			(sizeof(union sli4_qe) * entry_count), GFP_KERNEL);
+	if (!queue)
+		return NULL;
+	queue->page_count = (PAGE_ALIGN(entry_size * entry_count))/PAGE_SIZE;
+	INIT_LIST_HEAD(&queue->list);
+	INIT_LIST_HEAD(&queue->page_list);
+	INIT_LIST_HEAD(&queue->child_list);
+	for (x = 0, total_qe_count = 0; x < queue->page_count; x++) {
+		dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+		if (!dmabuf)
+			goto out_fail;
+		dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+						  PAGE_SIZE, &dmabuf->phys,
+						  GFP_KERNEL);
+		if (!dmabuf->virt) {
+			kfree(dmabuf);
+			goto out_fail;
+		}
+		dmabuf->buffer_tag = x;
+		list_add_tail(&dmabuf->list, &queue->page_list);
+		/* initialize queue's entry array */
+		dma_pointer = dmabuf->virt;
+		for (; total_qe_count < entry_count &&
+		     dma_pointer < (PAGE_SIZE + dmabuf->virt);
+		     total_qe_count++, dma_pointer += entry_size) {
+			queue->qe[total_qe_count].address = dma_pointer;
+		}
+	}
+	queue->entry_size = entry_size;
+	queue->entry_count = entry_count;
+	queue->phba = phba;
+
+	return queue;
+out_fail:
+	lpfc_sli4_queue_free(queue);
+	return NULL;
+}
+
+/**
+ * lpfc_eq_create - Create an Event Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @eq: The queue structure to use to create the event queue.
+ * @imax: The maximum interrupt per second limit.
+ *
+ * This function creates an event queue, as detailed in @eq, on a port,
+ * described by @phba by sending an EQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @eq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the EQ_CREATE mailbox command to the HBA to setup the
+ * event queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
+{
+	struct lpfc_mbx_eq_create *eq_create;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint16_t dmult;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	eq_create = &mbox->u.mqe.un.eq_create;
+	bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
+	       eq->page_count);
+	bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
+	       LPFC_EQE_SIZE);
+	bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+	/* Calculate delay multiper from maximum interrupt per second */
+	dmult = LPFC_DMULT_CONST/imax - 1;
+	bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
+	       dmult);
+	switch (eq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0360 Unsupported EQ count. (%d)\n",
+				eq->entry_count);
+		if (eq->entry_count < 256)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 256:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_4096);
+		break;
+	}
+	list_for_each_entry(dmabuf, &eq->page_list, list) {
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->context1 = NULL;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2500 EQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	eq->type = LPFC_EQ;
+	eq->subtype = LPFC_NONE;
+	eq->queue_id = bf_get(lpfc_mbx_eq_create_q_id, &eq_create->u.response);
+	if (eq->queue_id == 0xFFFF)
+		status = -ENXIO;
+	eq->host_index = 0;
+	eq->hba_index = 0;
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_create - Create a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cq: The queue structure to use to create the completion queue.
+ * @eq: The event queue to bind this completion queue to.
+ *
+ * This function creates a completion queue, as detailed in @wq, on a port,
+ * described by @phba by sending a CQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CQ_CREATE mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
+	       struct lpfc_queue *eq, uint32_t type, uint32_t subtype)
+{
+	struct lpfc_mbx_cq_create *cq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	cq_create = &mbox->u.mqe.un.cq_create;
+	bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
+		    cq->page_count);
+	bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_eq_id, &cq_create->u.request.context, eq->queue_id);
+	switch (cq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0361 Unsupported CQ count. (%d)\n",
+				cq->entry_count);
+		if (cq->entry_count < 256)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 256:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_1024);
+		break;
+	}
+	list_for_each_entry(dmabuf, &cq->page_list, list) {
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2501 CQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	if (cq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	/* link the cq onto the parent eq child list */
+	list_add_tail(&cq->list, &eq->child_list);
+	/* Set up completion queue's type and subtype */
+	cq->type = type;
+	cq->subtype = subtype;
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	cq->host_index = 0;
+	cq->hba_index = 0;
+out:
+
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_mq_create *mq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	mq_create = &mbox->u.mqe.un.mq_create;
+	bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+		    mq->page_count);
+	bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+		    cq->queue_id);
+	bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+	switch (mq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0362 Unsupported MQ count. (%d)\n",
+				mq->entry_count);
+		if (mq->entry_count < 16)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 16:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_16);
+		break;
+	case 32:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_32);
+		break;
+	case 64:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_64);
+		break;
+	case 128:
+		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+		       LPFC_MQ_CNT_128);
+		break;
+	}
+	list_for_each_entry(dmabuf, &mq->page_list, list) {
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2502 MQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response);
+	if (mq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	mq->type = LPFC_MQ;
+	mq->subtype = subtype;
+	mq->host_index = 0;
+	mq->hba_index = 0;
+
+	/* link the mq onto the parent cq child list */
+	list_add_tail(&mq->list, &cq->child_list);
+out:
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_create - Create a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @wq: The queue structure to use to create the work queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a work queue, as detailed in @wq, on a port, described
+ * by @phba by sending a WQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @wq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @cq
+ * is used to indicate which completion queue to bind this work queue to. This
+ * function will send the WQ_CREATE mailbox command to the HBA to setup the
+ * work queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_wq_create *wq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	wq_create = &mbox->u.mqe.un.wq_create;
+	bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
+		    wq->page_count);
+	bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
+		    cq->queue_id);
+	list_for_each_entry(dmabuf, &wq->page_list, list) {
+		wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2503 WQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+	if (wq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	wq->type = LPFC_WQ;
+	wq->subtype = subtype;
+	wq->host_index = 0;
+	wq->hba_index = 0;
+
+	/* link the wq onto the parent cq child list */
+	list_add_tail(&wq->list, &cq->child_list);
+out:
+	if (rc == MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_create - Create a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrq: The queue structure to use to create the header receive queue.
+ * @drq: The queue structure to use to create the data receive queue.
+ * @cq: The completion queue to bind this work queue to.
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+	       struct lpfc_queue *drq, struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_rq_create *rq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (hrq->entry_count != drq->entry_count)
+		return -EINVAL;
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	rq_create = &mbox->u.mqe.un.rq_create;
+	switch (hrq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2535 Unsupported RQ count. (%d)\n",
+				hrq->entry_count);
+		if (hrq->entry_count < 512)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 512:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_512);
+		break;
+	case 1024:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_4096);
+		break;
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       hrq->page_count);
+	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+	       LPFC_HDR_BUF_SIZE);
+	list_for_each_entry(dmabuf, &hrq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2504 RQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (hrq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->type = LPFC_HRQ;
+	hrq->subtype = subtype;
+	hrq->host_index = 0;
+	hrq->hba_index = 0;
+
+	/* now create the data queue */
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	switch (drq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2536 Unsupported RQ count. (%d)\n",
+				drq->entry_count);
+		if (drq->entry_count < 512)
+			return -EINVAL;
+		/* otherwise default to smallest count (drop through) */
+	case 512:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_512);
+		break;
+	case 1024:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+		       LPFC_RQ_RING_SIZE_4096);
+		break;
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       drq->page_count);
+	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+	       LPFC_DATA_BUF_SIZE);
+	list_for_each_entry(dmabuf, &drq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (drq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->type = LPFC_DRQ;
+	drq->subtype = subtype;
+	drq->host_index = 0;
+	drq->hba_index = 0;
+
+	/* link the header and data RQs onto the parent cq child list */
+	list_add_tail(&hrq->list, &cq->child_list);
+	list_add_tail(&drq->list, &cq->child_list);
+
+out:
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_eq_destroy - Destroy an event Queue on the HBA
+ * @eq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @eq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @eq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!eq)
+		return -ENODEV;
+	mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_eq_destroy_q_id, &mbox->u.mqe.un.eq_destroy.u.request,
+	       eq->queue_id);
+	mbox->vport = eq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+
+	rc = lpfc_sli_issue_mbox(eq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.eq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2505 EQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+
+	/* Remove eq from any list */
+	list_del_init(&eq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, eq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_destroy - Destroy a Completion Queue on the HBA
+ * @cq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @cq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @cq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!cq)
+		return -ENODEV;
+	mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_cq_destroy_q_id, &mbox->u.mqe.un.cq_destroy.u.request,
+	       cq->queue_id);
+	mbox->vport = cq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(cq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_create.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2506 CQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove cq from any list */
+	list_del_init(&cq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, cq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @qm: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!mq)
+		return -ENODEV;
+	mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+	       mq->queue_id);
+	mbox->vport = mq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2507 MQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove mq from any list */
+	list_del_init(&mq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, mq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_destroy - Destroy a Work Queue on the HBA
+ * @wq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @wq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @wq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!wq)
+		return -ENODEV;
+	mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_wq_destroy_q_id, &mbox->u.mqe.un.wq_destroy.u.request,
+	       wq->queue_id);
+	mbox->vport = wq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(wq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2508 WQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove wq from any list */
+	list_del_init(&wq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, wq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_destroy - Destroy a Receive Queue on the HBA
+ * @rq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @rq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @rq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+		struct lpfc_queue *drq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (!hrq || !drq)
+		return -ENODEV;
+	mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_destroy) -
+		  sizeof(struct mbox_header));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       hrq->queue_id);
+	mbox->vport = hrq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(hrq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2509 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		if (rc != MBX_TIMEOUT)
+			mempool_free(mbox, hrq->phba->mbox_mem_pool);
+		return -ENXIO;
+	}
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       drq->queue_id);
+	rc = lpfc_sli_issue_mbox(drq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2510 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	list_del_init(&hrq->list);
+	list_del_init(&drq->list);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, hrq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_sli4_post_sgl - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ * @pdma_phys_addr0: Physical address of the 1st SGL page.
+ * @pdma_phys_addr1: Physical address of the 2nd SGL page.
+ * @xritag: the xritag that ties this io to the SGL pages.
+ *
+ * This routine will post the sgl pages for the IO that has the xritag
+ * that is in the iocbq structure. The xritag is assigned during iocbq
+ * creation and persists for as long as the driver is loaded.
+ * if the caller has fewer than 256 scatter gather segments to map then
+ * pdma_phys_addr1 should be 0.
+ * If the caller needs to map more than 256 scatter gather segment then
+ * pdma_phys_addr1 should be a valid physical address.
+ * physical address for SGLs must be 64 byte aligned.
+ * If you are going to map 2 SGL's then the first one must have 256 entries
+ * the second sgl can have between 1 and 256 entries.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_post_sgl(struct lpfc_hba *phba,
+		dma_addr_t pdma_phys_addr0,
+		dma_addr_t pdma_phys_addr1,
+		uint16_t xritag)
+{
+	struct lpfc_mbx_post_sgl_pages *post_sgl_pages;
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (xritag == NO_XRI) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"0364 Invalid param:\n");
+		return -EINVAL;
+	}
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+			sizeof(struct lpfc_mbx_post_sgl_pages) -
+			sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+
+	post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
+				&mbox->u.mqe.un.post_sgl_pages;
+	bf_set(lpfc_post_sgl_pages_xri, post_sgl_pages, xritag);
+	bf_set(lpfc_post_sgl_pages_xricnt, post_sgl_pages, 1);
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr0));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr0));
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr1));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2511 POST_SGL mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return 0;
+}
+/**
+ * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ *
+ * This routine will remove all of the sgl pages registered with the hba.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
+			LPFC_SLI4_MBX_EMBED);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_next_xritag - Get an xritag for the io
+ * @phba: Pointer to HBA context object.
+ *
+ * This function gets an xritag for the iocb. If there is no unused xritag
+ * it will return 0xffff.
+ * The function returns the allocated xritag if successful, else returns zero.
+ * Zero is not a valid xritag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli4_next_xritag(struct lpfc_hba *phba)
+{
+	uint16_t xritag;
+
+	spin_lock_irq(&phba->hbalock);
+	xritag = phba->sli4_hba.next_xri;
+	if ((xritag != (uint16_t) -1) && xritag <
+		(phba->sli4_hba.max_cfg_param.max_xri
+			+ phba->sli4_hba.max_cfg_param.xri_base)) {
+		phba->sli4_hba.next_xri++;
+		phba->sli4_hba.max_cfg_param.xri_used++;
+		spin_unlock_irq(&phba->hbalock);
+		return xritag;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2004 Failed to allocate XRI.last XRITAG is %d"
+			" Max XRI is %d, Used XRI is %d\n",
+			phba->sli4_hba.next_xri,
+			phba->sli4_hba.max_cfg_param.max_xri,
+			phba->sli4_hba.max_cfg_param.xri_used);
+	return -1;
+}
+
+/**
+ * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+int
+lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
+{
+	struct lpfc_sglq *sglq_entry;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int els_xri_cnt, rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* The number of sgls to be posted */
+	els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+
+	reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"2559 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2560 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0285 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	if (unlikely(!mbox->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2525 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
+		sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+				cpu_to_le32(putPaddrLow(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+				cpu_to_le32(putPaddrLow(0));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(0));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = sglq_entry->sli4_xritag;
+		sgl_pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2513 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @sblist: pointer to scsi buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+int
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
+			      int cnt)
+{
+	struct lpfc_scsi_buf *psb;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	dma_addr_t pdma_phys_bpl1;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* Calculate the requested length of the dma memory */
+	reqlen = cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0217 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0283 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+				LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+				LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2561 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	if (unlikely(!mbox->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2565 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	pg_pairs = 0;
+	list_for_each_entry(psb, sblist, list) {
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+			cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+			cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+			cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+			cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = psb->cur_iocbq.sli4_xritag;
+		sgl_pg_pairs++;
+		pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2564 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
+ * @phba: pointer to lpfc_hba struct that the frame was received on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function checks the fields in the @fc_hdr to see if the FC frame is a
+ * valid type of frame that the LPFC driver will handle. This function will
+ * return a zero if the frame is a valid frame or a non zero value when the
+ * frame does not pass the check.
+ **/
+static int
+lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
+{
+	char *rctl_names[] = FC_RCTL_NAMES_INIT;
+	char *type_names[] = FC_TYPE_NAMES_INIT;
+	struct fc_vft_header *fc_vft_hdr;
+
+	switch (fc_hdr->fh_r_ctl) {
+	case FC_RCTL_DD_UNCAT:		/* uncategorized information */
+	case FC_RCTL_DD_SOL_DATA:	/* solicited data */
+	case FC_RCTL_DD_UNSOL_CTL:	/* unsolicited control */
+	case FC_RCTL_DD_SOL_CTL:	/* solicited control or reply */
+	case FC_RCTL_DD_UNSOL_DATA:	/* unsolicited data */
+	case FC_RCTL_DD_DATA_DESC:	/* data descriptor */
+	case FC_RCTL_DD_UNSOL_CMD:	/* unsolicited command */
+	case FC_RCTL_DD_CMD_STATUS:	/* command status */
+	case FC_RCTL_ELS_REQ:	/* extended link services request */
+	case FC_RCTL_ELS_REP:	/* extended link services reply */
+	case FC_RCTL_ELS4_REQ:	/* FC-4 ELS request */
+	case FC_RCTL_ELS4_REP:	/* FC-4 ELS reply */
+	case FC_RCTL_BA_NOP:  	/* basic link service NOP */
+	case FC_RCTL_BA_ABTS: 	/* basic link service abort */
+	case FC_RCTL_BA_RMC: 	/* remove connection */
+	case FC_RCTL_BA_ACC:	/* basic accept */
+	case FC_RCTL_BA_RJT:	/* basic reject */
+	case FC_RCTL_BA_PRMT:
+	case FC_RCTL_ACK_1:	/* acknowledge_1 */
+	case FC_RCTL_ACK_0:	/* acknowledge_0 */
+	case FC_RCTL_P_RJT:	/* port reject */
+	case FC_RCTL_F_RJT:	/* fabric reject */
+	case FC_RCTL_P_BSY:	/* port busy */
+	case FC_RCTL_F_BSY:	/* fabric busy to data frame */
+	case FC_RCTL_F_BSYL:	/* fabric busy to link control frame */
+	case FC_RCTL_LCR:	/* link credit reset */
+	case FC_RCTL_END:	/* end */
+		break;
+	case FC_RCTL_VFTH:	/* Virtual Fabric tagging Header */
+		fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+		fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
+		return lpfc_fc_frame_check(phba, fc_hdr);
+	default:
+		goto drop;
+	}
+	switch (fc_hdr->fh_type) {
+	case FC_TYPE_BLS:
+	case FC_TYPE_ELS:
+	case FC_TYPE_FCP:
+	case FC_TYPE_CT:
+		break;
+	case FC_TYPE_IP:
+	case FC_TYPE_ILS:
+	default:
+		goto drop;
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+			"2538 Received frame rctl:%s type:%s\n",
+			rctl_names[fc_hdr->fh_r_ctl],
+			type_names[fc_hdr->fh_type]);
+	return 0;
+drop:
+	lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+			"2539 Dropped frame rctl:%s type:%s\n",
+			rctl_names[fc_hdr->fh_r_ctl],
+			type_names[fc_hdr->fh_type]);
+	return 1;
+}
+
+/**
+ * lpfc_fc_hdr_get_vfi - Get the VFI from an FC frame
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function processes the FC header to retrieve the VFI from the VF
+ * header, if one exists. This function will return the VFI if one exists
+ * or 0 if no VSAN Header exists.
+ **/
+static uint32_t
+lpfc_fc_hdr_get_vfi(struct fc_frame_header *fc_hdr)
+{
+	struct fc_vft_header *fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+
+	if (fc_hdr->fh_r_ctl != FC_RCTL_VFTH)
+		return 0;
+	return bf_get(fc_vft_hdr_vf_id, fc_vft_hdr);
+}
+
+/**
+ * lpfc_fc_frame_to_vport - Finds the vport that a frame is destined to
+ * @phba: Pointer to the HBA structure to search for the vport on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ * @fcfi: The FC Fabric ID that the frame came from
+ *
+ * This function searches the @phba for a vport that matches the content of the
+ * @fc_hdr passed in and the @fcfi. This function uses the @fc_hdr to fetch the
+ * VFI, if the Virtual Fabric Tagging Header exists, and the DID. This function
+ * returns the matching vport pointer or NULL if unable to match frame to a
+ * vport.
+ **/
+static struct lpfc_vport *
+lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
+		       uint16_t fcfi)
+{
+	struct lpfc_vport **vports;
+	struct lpfc_vport *vport = NULL;
+	int i;
+	uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
+			fc_hdr->fh_d_id[1] << 8 |
+			fc_hdr->fh_d_id[2]);
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL)
+		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+			if (phba->fcf.fcfi == fcfi &&
+			    vports[i]->vfi == lpfc_fc_hdr_get_vfi(fc_hdr) &&
+			    vports[i]->fc_myDID == did) {
+				vport = vports[i];
+				break;
+			}
+		}
+	lpfc_destroy_vport_work_array(phba, vports);
+	return vport;
+}
+
+/**
+ * lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
+ * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
+ *
+ * This function searches through the existing incomplete sequences that have
+ * been sent to this @vport. If the frame matches one of the incomplete
+ * sequences then the dbuf in the @dmabuf is added to the list of frames that
+ * make up that sequence. If no sequence is found that matches this frame then
+ * the function will add the hbuf in the @dmabuf to the @vport's rcv_buffer_list
+ * This function returns a pointer to the first dmabuf in the sequence list that
+ * the frame was linked to.
+ **/
+static struct hbq_dmabuf *
+lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *new_hdr;
+	struct fc_frame_header *temp_hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct lpfc_dmabuf *h_buf;
+	struct hbq_dmabuf *seq_dmabuf = NULL;
+	struct hbq_dmabuf *temp_dmabuf = NULL;
+
+	new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* Use the hdr_buf to find the sequence that this frame belongs to */
+	list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+		temp_hdr = (struct fc_frame_header *)h_buf->virt;
+		if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+		    (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+		    (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+			continue;
+		/* found a pending sequence that matches this frame */
+		seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		break;
+	}
+	if (!seq_dmabuf) {
+		/*
+		 * This indicates first frame received for this sequence.
+		 * Queue the buffer on the vport's rcv_buffer_list.
+		 */
+		list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+		return dmabuf;
+	}
+	temp_hdr = seq_dmabuf->hbuf.virt;
+	if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+		list_add(&seq_dmabuf->dbuf.list, &dmabuf->dbuf.list);
+		return dmabuf;
+	}
+	/* find the correct place in the sequence to insert this frame */
+	list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
+		temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
+		/*
+		 * If the frame's sequence count is greater than the frame on
+		 * the list then insert the frame right after this frame
+		 */
+		if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+			list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
+			return seq_dmabuf;
+		}
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_seq_complete - Indicates if a sequence is complete
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function checks the sequence, starting with the frame described by
+ * @dmabuf, to see if all the frames associated with this sequence are present.
+ * the frames associated with this sequence are linked to the @dmabuf using the
+ * dbuf list. This function looks for two major things. 1) That the first frame
+ * has a sequence count of zero. 2) There is a frame with last frame of sequence
+ * set. 3) That there are no holes in the sequence count. The function will
+ * return 1 when the sequence is complete, otherwise it will return 0.
+ **/
+static int
+lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct hbq_dmabuf *seq_dmabuf;
+	uint32_t fctl;
+	int seq_count = 0;
+
+	hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* make sure first fame of sequence has a sequence count of zero */
+	if (hdr->fh_seq_cnt != seq_count)
+		return 0;
+	fctl = (hdr->fh_f_ctl[0] << 16 |
+		hdr->fh_f_ctl[1] << 8 |
+		hdr->fh_f_ctl[2]);
+	/* If last frame of sequence we can return success. */
+	if (fctl & FC_FC_END_SEQ)
+		return 1;
+	list_for_each_entry(d_buf, &dmabuf->dbuf.list, list) {
+		seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		/* If there is a hole in the sequence count then fail. */
+		if (++seq_count != hdr->fh_seq_cnt)
+			return 0;
+		fctl = (hdr->fh_f_ctl[0] << 16 |
+			hdr->fh_f_ctl[1] << 8 |
+			hdr->fh_f_ctl[2]);
+		/* If last frame of sequence we can return success. */
+		if (fctl & FC_FC_END_SEQ)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_prep_seq - Prep sequence for ULP processing
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function takes a sequence, described by a list of frames, and creates
+ * a list of iocbq structures to describe the sequence. This iocbq list will be
+ * used to issue to the generic unsolicited sequence handler. This routine
+ * returns a pointer to the first iocbq in the list. If the function is unable
+ * to allocate an iocbq then it throw out the received frames that were not
+ * able to be described and return a pointer to the first iocbq. If unable to
+ * allocate any iocbqs (including the first) this function will return NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
+{
+	struct lpfc_dmabuf *d_buf, *n_buf;
+	struct lpfc_iocbq *first_iocbq, *iocbq;
+	struct fc_frame_header *fc_hdr;
+	uint32_t sid;
+
+	fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+	/* remove from receive buffer list */
+	list_del_init(&seq_dmabuf->hbuf.list);
+	/* get the Remote Port's SID */
+	sid = (fc_hdr->fh_s_id[0] << 16 |
+	       fc_hdr->fh_s_id[1] << 8 |
+	       fc_hdr->fh_s_id[2]);
+	/* Get an iocbq struct to fill in. */
+	first_iocbq = lpfc_sli_get_iocbq(vport->phba);
+	if (first_iocbq) {
+		/* Initialize the first IOCB. */
+		first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
+		first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+		first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
+		first_iocbq->iocb.unsli3.rcvsli3.vpi =
+					vport->vpi + vport->phba->vpi_base;
+		/* put the first buffer into the first IOCBq */
+		first_iocbq->context2 = &seq_dmabuf->dbuf;
+		first_iocbq->context3 = NULL;
+		first_iocbq->iocb.ulpBdeCount = 1;
+		first_iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+		first_iocbq->iocb.un.rcvels.remoteID = sid;
+	}
+	iocbq = first_iocbq;
+	/*
+	 * Each IOCBq can have two Buffers assigned, so go through the list
+	 * of buffers for this sequence and save two buffers in each IOCBq
+	 */
+	list_for_each_entry_safe(d_buf, n_buf, &seq_dmabuf->dbuf.list, list) {
+		if (!iocbq) {
+			lpfc_in_buf_free(vport->phba, d_buf);
+			continue;
+		}
+		if (!iocbq->context3) {
+			iocbq->context3 = d_buf;
+			iocbq->iocb.ulpBdeCount++;
+			iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+		} else {
+			iocbq = lpfc_sli_get_iocbq(vport->phba);
+			if (!iocbq) {
+				if (first_iocbq) {
+					first_iocbq->iocb.ulpStatus =
+							IOSTAT_FCP_RSP_ERROR;
+					first_iocbq->iocb.un.ulpWord[4] =
+							IOERR_NO_RESOURCES;
+				}
+				lpfc_in_buf_free(vport->phba, d_buf);
+				continue;
+			}
+			iocbq->context2 = d_buf;
+			iocbq->context3 = NULL;
+			iocbq->iocb.ulpBdeCount = 1;
+			iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+							LPFC_DATA_BUF_SIZE;
+			iocbq->iocb.un.rcvels.remoteID = sid;
+			list_add_tail(&iocbq->list, &first_iocbq->list);
+		}
+	}
+	return first_iocbq;
+}
+
+/**
+ * lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function processes all
+ * the received buffers and gives it to upper layers when a received buffer
+ * indicates that it is the final frame in the sequence. The interrupt
+ * service routine processes received buffers at interrupt contexts and adds
+ * received dma buffers to the rb_pend_list queue and signals the worker thread.
+ * Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
+ * appropriate receive function when the final frame in a sequence is received.
+ **/
+int
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
+{
+	LIST_HEAD(cmplq);
+	struct hbq_dmabuf *dmabuf, *seq_dmabuf;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_vport *vport;
+	uint32_t fcfi;
+	struct lpfc_iocbq *iocbq;
+
+	/* Clear hba flag and get all received buffers into the cmplq */
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag &= ~HBA_RECEIVE_BUFFER;
+	list_splice_init(&phba->rb_pend_list, &cmplq);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Process each received buffer */
+	while ((dmabuf = lpfc_sli_hbqbuf_get(&cmplq)) != NULL) {
+		fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+		/* check to see if this a valid type of frame */
+		if (lpfc_fc_frame_check(phba, fc_hdr)) {
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->rcqe);
+		vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
+		if (!vport) {
+			/* throw out the frame */
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		/* Link this frame */
+		seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+		if (!seq_dmabuf) {
+			/* unable to add frame to vport - throw it out */
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			continue;
+		}
+		/* If not last frame in sequence continue processing frames. */
+		if (!lpfc_seq_complete(seq_dmabuf)) {
+			/*
+			 * When saving off frames post a new one and mark this
+			 * frame to be freed when it is finished.
+			 **/
+			lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
+			dmabuf->tag = -1;
+			continue;
+		}
+		fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+		if (!lpfc_complete_unsol_iocb(phba,
+					      &phba->sli.ring[LPFC_ELS_RING],
+					      iocbq, fc_hdr->fh_r_ctl,
+					      fc_hdr->fh_type))
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"2540 Ring %d handler: unexpected Rctl "
+					"x%x Type x%x received\n",
+					LPFC_ELS_RING,
+					fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+	};
+	return 0;
+}
+
+/**
+ * lpfc_sli4_post_all_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * This routine does not require any locks.  It's usage is expected
+ * to be driver load or reset recovery when the driver is
+ * sequential.
+ *
+ * Return codes
+ * 	0 - sucessful
+ *      EIO - The mailbox failed to complete successfully.
+ * 	When this error occurs, the driver is not guaranteed
+ *	to have any rpi regions posted to the device and
+ *	must either attempt to repost the regions or take a
+ *	fatal error.
+ **/
+int
+lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_page;
+	uint32_t rc = 0;
+
+	/* Post all rpi memory regions to the port. */
+	list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2008 Error %d posting all rpi "
+					"headers\n", rc);
+			rc = -EIO;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_rpi_hdr - Post an rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi_page:  pointer to the rpi memory region.
+ *
+ * This routine is invoked to post a single rpi header to the
+ * HBA consistent with the SLI-4 interface spec.  This memory region
+ * maps up to 64 rpi context regions.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	ENOMEM - No available memory
+ *      EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
+	uint32_t rc = 0;
+	uint32_t mbox_tmo;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2001 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Post all rpi memory regions to the port. */
+	hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
+			 sizeof(struct lpfc_mbx_post_hdr_tmpl) -
+			 sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+	       hdr_tmpl, rpi_page->page_count);
+	bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
+	       rpi_page->start_rpi);
+	hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
+	hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2514 POST_RPI_HDR mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_rpi - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ * 	A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * 	LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+int
+lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
+{
+	int rpi;
+	uint16_t max_rpi, rpi_base, rpi_limit;
+	uint16_t rpi_remaining;
+	struct lpfc_rpi_hdr *rpi_hdr;
+
+	max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+	rpi_base = phba->sli4_hba.max_cfg_param.rpi_base;
+	rpi_limit = phba->sli4_hba.next_rpi;
+
+	/*
+	 * The valid rpi range is not guaranteed to be zero-based.  Start
+	 * the search at the rpi_base as reported by the port.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base);
+	if (rpi >= rpi_limit || rpi < rpi_base)
+		rpi = LPFC_RPI_ALLOC_ERROR;
+	else {
+		set_bit(rpi, phba->sli4_hba.rpi_bmask);
+		phba->sli4_hba.max_cfg_param.rpi_used++;
+		phba->sli4_hba.rpi_count++;
+	}
+
+	/*
+	 * Don't try to allocate more rpi header regions if the device limit
+	 * on available rpis max has been exhausted.
+	 */
+	if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
+	    (phba->sli4_hba.rpi_count >= max_rpi)) {
+		spin_unlock_irq(&phba->hbalock);
+		return rpi;
+	}
+
+	/*
+	 * If the driver is running low on rpi resources, allocate another
+	 * page now.  Note that the next_rpi value is used because
+	 * it represents how many are actually in use whereas max_rpi notes
+	 * how many are supported max by the device.
+	 */
+	rpi_remaining = phba->sli4_hba.next_rpi - rpi_base -
+		phba->sli4_hba.rpi_count;
+	spin_unlock_irq(&phba->hbalock);
+	if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
+		rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+		if (!rpi_hdr) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2002 Error Could not grow rpi "
+					"count\n");
+		} else {
+			lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
+		}
+	}
+
+	return rpi;
+}
+
+/**
+ * lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+	spin_lock_irq(&phba->hbalock);
+	clear_bit(rpi, phba->sli4_hba.rpi_bmask);
+	phba->sli4_hba.rpi_count--;
+	phba->sli4_hba.max_cfg_param.rpi_used--;
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_remove_rpis - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+void
+lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.rpi_bmask);
+}
+
+/**
+ * lpfc_sli4_resume_rpi - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+int
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_hba *phba = ndlp->phba;
+	int rc;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/* Post all rpi memory regions to the port. */
+	lpfc_resume_rpi(mboxq, ndlp);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2010 Resume RPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_init_vpi - Initialize a vpi with the port
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: vpi value to activate with the port.
+ *
+ * This routine is invoked to activate a vpi with the
+ * port when the host intends to use vports with a
+ * nonzero vpi.
+ *
+ * Returns:
+ *    0 success
+ *    -Evalue otherwise
+ **/
+int
+lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int rc = 0;
+	uint32_t mbox_tmo;
+
+	if (vpi == 0)
+		return -EINVAL;
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+	lpfc_init_vpi(mboxq, vpi);
+	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+	rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2022 INIT VPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		rc = -EIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_mbx_cmpl_add_fcf_record - add fcf mbox completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+static void
+lpfc_mbx_cmpl_add_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t shdr_status, shdr_add_status;
+
+	virt_addr = mboxq->sge_array->addr[0];
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+	if ((shdr_status || shdr_add_status) &&
+		(shdr_status != STATUS_FCF_IN_USE))
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2558 ADD_FCF_RECORD mailbox failed with "
+			"status x%x add_status x%x\n",
+			shdr_status, shdr_add_status);
+
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
+ * lpfc_sli4_add_fcf_record - Manually add an FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the initialized fcf record to add.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+int
+lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	uint8_t *bytep;
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	uint32_t fcfindex;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2009 Failed to allocate mbox for ADD_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) + sizeof(union lpfc_sli4_cfg_shdr) +
+		  sizeof(uint32_t);
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+				     LPFC_MBOX_OPCODE_FCOE_ADD_FCF,
+				     req_len, LPFC_SLI4_MBX_NEMBED);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2523 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Get the first SGE entry from the non-embedded DMA memory.  This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2526 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+	/*
+	 * Configure the FCF record for FCFI 0.  This is the driver's
+	 * hardcoded default and gets used in nonFIP mode.
+	 */
+	fcfindex = bf_get(lpfc_fcf_record_fcf_index, fcf_record);
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(&fcfindex, bytep, sizeof(uint32_t));
+
+	/*
+	 * Copy the fcf_index and the FCF Record Data. The data starts after
+	 * the FCoE header plus word10. The data copy needs to be endian
+	 * correct.
+	 */
+	bytep += sizeof(uint32_t);
+	lpfc_sli_pcimem_bcopy(fcf_record, bytep, sizeof(struct fcf_record));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_add_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2515 ADD_FCF_RECORD mailbox failed with "
+			"status 0x%x\n", rc);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		rc = -EIO;
+	} else
+		rc = 0;
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_build_dflt_fcf_record - Build the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the fcf record to write the default data.
+ * @fcf_index: FCF table entry index.
+ *
+ * This routine is invoked to build the driver's default FCF record.  The
+ * values used are hardcoded.  This routine handles memory initialization.
+ *
+ **/
+void
+lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
+				struct fcf_record *fcf_record,
+				uint16_t fcf_index)
+{
+	memset(fcf_record, 0, sizeof(struct fcf_record));
+	fcf_record->max_rcv_size = LPFC_FCOE_MAX_RCV_SIZE;
+	fcf_record->fka_adv_period = LPFC_FCOE_FKA_ADV_PER;
+	fcf_record->fip_priority = LPFC_FCOE_FIP_PRIORITY;
+	bf_set(lpfc_fcf_record_mac_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_mac_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_mac_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_mac_3, fcf_record, LPFC_FCOE_FCF_MAC3);
+	bf_set(lpfc_fcf_record_mac_4, fcf_record, LPFC_FCOE_FCF_MAC4);
+	bf_set(lpfc_fcf_record_mac_5, fcf_record, LPFC_FCOE_FCF_MAC5);
+	bf_set(lpfc_fcf_record_fc_map_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+	bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
+	bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
+		LPFC_FCF_FPMA | LPFC_FCF_SPMA);
+	/* Set the VLAN bit map */
+	if (phba->valid_vlan) {
+		fcf_record->vlan_bitmap[phba->vlan_id / 8]
+			= 1 << (phba->vlan_id % 8);
+	}
+}
+
+/**
+ * lpfc_sli4_read_fcf_record - Read the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read up to @fcf_num of FCF record from the
+ * device starting with the given @fcf_index.
+ **/
+int
+lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+	void *virt_addr;
+	dma_addr_t phys_addr;
+	uint8_t *bytep;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2000 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) +
+		  sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+	/* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0291 Allocated DMA memory size (x%x) is "
+				"less than the requested DMA memory "
+				"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory. This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+	if (unlikely(!mboxq->sge_array)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2527 Failed to get the non-embedded SGE "
+				"virtual address\n");
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+	virt_addr = mboxq->sge_array->addr[0];
+	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+	/* Set up command fields */
+	bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+	/* Perform necessary endian conversion */
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		error = -EIO;
+	} else
+		error = 0;
+	return error;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 883938652a6..7d37eb7459b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@ typedef enum _lpfc_ctx_cmd {
 	LPFC_CTX_HOST
 } lpfc_ctx_cmd;
 
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+	uint8_t hw_status;
+	uint8_t bfield;
+#define LPFC_XB	0x1
+#define LPFC_PV	0x2
+	uint8_t priority;
+	uint8_t reserved;
+};
+
 /* This structure is used to handle IOCB requests / responses */
 struct lpfc_iocbq {
 	/* lpfc_iocbqs are used in double linked lists */
 	struct list_head list;
 	struct list_head clist;
 	uint16_t iotag;         /* pre-assigned IO tag */
-	uint16_t rsvd1;
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 
 	IOCB_t iocb;		/* IOCB cmd */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@ struct lpfc_iocbq {
 			   struct lpfc_iocbq *);
 	void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
 			   struct lpfc_iocbq *);
-
+	struct lpfc_sli4_rspiocb_info sli4_info;
 };
 
 #define SLI_IOCB_RET_IOCB      1	/* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@ struct lpfc_iocbq {
 typedef struct lpfcMboxq {
 	/* MBOXQs are used in single linked lists */
 	struct list_head list;	/* ptr to next mailbox command */
-	MAILBOX_t mb;		/* Mailbox cmd */
-	struct lpfc_vport *vport;/* virutal port pointer */
+	union {
+		MAILBOX_t mb;		/* Mailbox cmd */
+		struct lpfc_mqe mqe;
+	} u;
+	struct lpfc_vport *vport;/* virtual port pointer */
 	void *context1;		/* caller context information */
 	void *context2;		/* caller context information */
 
 	void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
 	uint8_t mbox_flag;
-
+	struct lpfc_mcqe mcqe;
+	struct lpfc_mbx_nembed_sge_virt *sge_array;
 } LPFC_MBOXQ_t;
 
 #define MBX_POLL        1	/* poll mailbox till command done, then
@@ -230,10 +244,11 @@ struct lpfc_sli {
 
 	/* Additional sli_flags */
 #define LPFC_SLI_MBOX_ACTIVE      0x100	/* HBA mailbox is currently active */
-#define LPFC_SLI2_ACTIVE          0x200	/* SLI2 overlay in firmware is active */
+#define LPFC_SLI_ACTIVE           0x200	/* SLI in firmware is active */
 #define LPFC_PROCESS_LA           0x400	/* Able to process link attention */
 #define LPFC_BLOCK_MGMT_IO        0x800	/* Don't allow mgmt mbx or iocb cmds */
 #define LPFC_MENLO_MAINT          0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK    0x2000 /* Async mailbox is blocked */
 
 	struct lpfc_sli_ring ring[LPFC_MAX_RING];
 	int fcp_ring;		/* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@ struct lpfc_sli {
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60	/* Sec tmo for outstanding mbox
+					   command */
 #define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
 					 * or erase cmds. This is especially
 					 * long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 00000000000..5196b46608d
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.emulex.com                                                  *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT               100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL	32
+#define LPFC_GET_QE_REL_INT			32
+#define LPFC_RPI_LOW_WATER_MARK			10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT		254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX       8
+#define LPFC_SP_EQN_DEF       1
+#define LPFC_FP_EQN_DEF       1
+#define LPFC_FP_EQN_MIN       1
+#define LPFC_FP_EQN_MAX       (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX       32
+#define LPFC_SP_WQN_DEF       1
+#define LPFC_FP_WQN_DEF       4
+#define LPFC_FP_WQN_MIN       1
+#define LPFC_FP_WQN_MAX       (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX	0
+#define LPFC_FCOE_FCF_GET_FIRST	0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE	0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3	0xFF
+#define LPFC_FCOE_FCF_MAC4	0xFF
+#define LPFC_FCOE_FCF_MAC5	0xFE
+#define LPFC_FCOE_FCF_MAP0	0x0E
+#define LPFC_FCOE_FCF_MAP1	0xFC
+#define LPFC_FCOE_FCF_MAP2	0x00
+#define LPFC_FCOE_MAX_RCV_SIZE	0x5AC
+#define LPFC_FCOE_FKA_ADV_PER	0
+#define LPFC_FCOE_FIP_PRIORITY	0x80
+
+enum lpfc_sli4_queue_type {
+	LPFC_EQ,
+	LPFC_GCQ,
+	LPFC_MCQ,
+	LPFC_WCQ,
+	LPFC_RCQ,
+	LPFC_MQ,
+	LPFC_WQ,
+	LPFC_HRQ,
+	LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+	LPFC_NONE,
+	LPFC_MBOX,
+	LPFC_FCP,
+	LPFC_ELS,
+	LPFC_USOL
+};
+
+union sli4_qe {
+	void *address;
+	struct lpfc_eqe *eqe;
+	struct lpfc_cqe *cqe;
+	struct lpfc_mcqe *mcqe;
+	struct lpfc_wcqe_complete *wcqe_complete;
+	struct lpfc_wcqe_release *wcqe_release;
+	struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+	struct lpfc_rcqe_complete *rcqe_complete;
+	struct lpfc_mqe *mqe;
+	union  lpfc_wqe *wqe;
+	struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+	struct list_head list;
+	enum lpfc_sli4_queue_type type;
+	enum lpfc_sli4_queue_subtype subtype;
+	struct lpfc_hba *phba;
+	struct list_head child_list;
+	uint32_t entry_count;	/* Number of entries to support on the queue */
+	uint32_t entry_size;	/* Size of each queue entry. */
+	uint32_t queue_id;	/* Queue ID assigned by the hardware */
+	struct list_head page_list;
+	uint32_t page_count;	/* Number of pages allocated for this queue */
+
+	uint32_t host_index;	/* The host's index for putting or getting */
+	uint32_t hba_index;	/* The last known hba index for get or put */
+	union sli4_qe qe[1];	/* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+	struct list_head list;
+	union {
+		struct lpfc_mcqe		mcqe_cmpl;
+		struct lpfc_acqe_link		acqe_link;
+		struct lpfc_acqe_fcoe		acqe_fcoe;
+		struct lpfc_acqe_dcbx		acqe_dcbx;
+		struct lpfc_rcqe		rcqe_cmpl;
+		struct sli4_wcqe_xri_aborted	wcqe_axri;
+	} cqe;
+};
+
+struct lpfc_sli4_link {
+	uint8_t speed;
+	uint8_t duplex;
+	uint8_t status;
+	uint8_t physical;
+	uint8_t fault;
+};
+
+struct lpfc_fcf {
+	uint8_t	 fabric_name[8];
+	uint8_t  mac_addr[6];
+	uint16_t fcf_indx;
+	uint16_t fcfi;
+	uint32_t fcf_flag;
+#define FCF_AVAILABLE	0x01 /* FCF available for discovery */
+#define FCF_REGISTERED	0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED	0x04 /* FCF discovery started  */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE	0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN	0x20 /* Use the vlan id specified */
+	uint32_t priority;
+	uint32_t addr_mode;
+	uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION	1
+#define LPFC_REGION23_LAST_REC  0xff
+struct lpfc_fip_param_hdr {
+	uint8_t type;
+#define FCOE_PARAM_TYPE		0xA0
+	uint8_t length;
+#define FCOE_PARAM_LENGTH	2
+	uint8_t parm_version;
+#define FIPP_VERSION		0x01
+	uint8_t parm_flags;
+#define	lpfc_fip_param_hdr_fipp_mode_SHIFT	6
+#define	lpfc_fip_param_hdr_fipp_mode_MASK	0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD	parm_flags
+#define	FIPP_MODE_ON				0x2
+#define	FIPP_MODE_OFF				0x0
+#define FIPP_VLAN_VALID				0x1
+};
+
+struct lpfc_fcoe_params {
+	uint8_t fc_map[3];
+	uint8_t reserved1;
+	uint16_t vlan_tag;
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+	uint8_t type;
+#define FCOE_CONN_TBL_TYPE		0xA1
+	uint8_t length;   /* words */
+	uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+	uint16_t flags;
+#define	FCFCNCT_VALID		0x0001
+#define	FCFCNCT_BOOT		0x0002
+#define	FCFCNCT_PRIMARY		0x0004   /* if not set, Secondary */
+#define	FCFCNCT_FBNM_VALID	0x0008
+#define	FCFCNCT_SWNM_VALID	0x0010
+#define	FCFCNCT_VLAN_VALID	0x0020
+#define	FCFCNCT_AM_VALID	0x0040
+#define	FCFCNCT_AM_PREFERRED	0x0080   /* if not set, AM Required */
+#define	FCFCNCT_AM_SPMA		0x0100	 /* if not set, FPMA */
+
+	uint16_t vlan_tag;
+	uint8_t fabric_name[8];
+	uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+	struct list_head list;
+	struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox.  This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+	struct lpfc_dmabuf *dmabuf;
+	struct dma_address dma_address;
+	void *avirt;
+	dma_addr_t aphys;
+	uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 	4
+#define LPFC_EQE_SIZE_16B	16
+#define LPFC_CQE_SIZE		16
+#define LPFC_WQE_SIZE		64
+#define LPFC_MQE_SIZE		256
+#define LPFC_RQE_SIZE		8
+
+#define LPFC_EQE_DEF_COUNT	1024
+#define LPFC_CQE_DEF_COUNT      256
+#define LPFC_WQE_DEF_COUNT      64
+#define LPFC_MQE_DEF_COUNT      16
+#define LPFC_RQE_DEF_COUNT	512
+
+#define LPFC_QUEUE_NOARM	false
+#define LPFC_QUEUE_REARM	true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+	uint16_t max_xri;
+	uint16_t xri_base;
+	uint16_t xri_used;
+	uint16_t max_rpi;
+	uint16_t rpi_base;
+	uint16_t rpi_used;
+	uint16_t max_vpi;
+	uint16_t vpi_base;
+	uint16_t vpi_used;
+	uint16_t max_vfi;
+	uint16_t vfi_base;
+	uint16_t vfi_used;
+	uint16_t max_fcfi;
+	uint16_t fcfi_base;
+	uint16_t fcfi_used;
+	uint16_t max_eq;
+	uint16_t max_rq;
+	uint16_t max_cq;
+	uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+	uint32_t idx;
+	struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+	void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR0, config space registers */
+	void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR1, control registers */
+	void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+					     PCI BAR2, doorbell registers */
+	/* BAR0 PCI config space register memory map */
+	void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+	void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+	void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+	void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR	0xFFFFFFFF
+	void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+	/* BAR1 FCoE function CSR register memory map */
+	void __iomem *STAregaddr;    /* Address to HST_STATE register */
+	void __iomem *ISRregaddr;    /* Address to HST_ISR register */
+	void __iomem *IMRregaddr;    /* Address to HST_IMR register */
+	void __iomem *ISCRregaddr;   /* Address to HST_ISCR register */
+	/* BAR2 VF-0 doorbell register memory map */
+	void __iomem *RQDBregaddr;   /* Address to RQ_DOORBELL register */
+	void __iomem *WQDBregaddr;   /* Address to WQ_DOORBELL register */
+	void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+	void __iomem *MQDBregaddr;   /* Address to MQ_DOORBELL register */
+	void __iomem *BMBXregaddr;   /* Address to BootStrap MBX register */
+
+	struct msix_entry *msix_entries;
+	uint32_t cfg_eqn;
+	struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+	/* Pointers to the constructed SLI4 queues */
+	struct lpfc_queue **fp_eq; /* Fast-path event queue */
+	struct lpfc_queue *sp_eq;  /* Slow-path event queue */
+	struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+	struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+	struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+	struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+	struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+	struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+	struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+	struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+	struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+	/* Setup information for various queue parameters */
+	int eq_esize;
+	int eq_ecount;
+	int cq_esize;
+	int cq_ecount;
+	int wq_esize;
+	int wq_ecount;
+	int mq_esize;
+	int mq_ecount;
+	int rq_esize;
+	int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC         10000
+#define LPFC_FP_EQ_MAX_INTR_SEC         10000
+
+	uint32_t intr_enable;
+	struct lpfc_bmbx bmbx;
+	struct lpfc_max_cfg_param max_cfg_param;
+	uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+	uint16_t next_rpi;
+	uint16_t scsi_xri_max;
+	uint16_t scsi_xri_cnt;
+	struct list_head lpfc_free_sgl_list;
+	struct list_head lpfc_sgl_list;
+	struct lpfc_sglq **lpfc_els_sgl_array;
+	struct list_head lpfc_abts_els_sgl_list;
+	struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+	struct list_head lpfc_abts_scsi_buf_list;
+	uint32_t total_sglq_bufs;
+	struct lpfc_sglq **lpfc_sglq_active_list;
+	struct list_head lpfc_rpi_hdr_list;
+	unsigned long *rpi_bmask;
+	uint16_t rpi_count;
+	struct lpfc_sli4_flags sli4_flags;
+	struct list_head sp_rspiocb_work_queue;
+	struct list_head sp_cqe_event_pool;
+	struct list_head sp_asynce_work_queue;
+	struct list_head sp_fcp_xri_aborted_work_queue;
+	struct list_head sp_els_xri_aborted_work_queue;
+	struct list_head sp_unsol_work_queue;
+	struct lpfc_sli4_link link_state;
+	spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+	spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+	GEN_BUFF_TYPE,
+	SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+	/* lpfc_sglqs are used in double linked lists */
+	struct list_head list;
+	struct list_head clist;
+	enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+	uint16_t iotag;         /* pre-assigned IO tag */
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
+	struct sli4_sge *sgl;	/* pre-assigned SGL */
+	void *virt;		/* virtual address. */
+	dma_addr_t phys;	/* physical address */
+};
+
+struct lpfc_rpi_hdr {
+	struct list_head list;
+	uint32_t len;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t page_count;
+	uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+		     uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+			   struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+			uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+			 struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+			       struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index e599519e307..6b8a148f0a5 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.1"
+#define LPFC_DRIVER_VERSION "8.3.2"
 
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56b0af..a6313ee84ac 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -89,6 +91,8 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
 		vpi = 0;
 	else
 		set_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used++;
 	spin_unlock_irq(&phba->hbalock);
 	return vpi;
 }
@@ -96,8 +100,12 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
 static void
 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
 {
+	if (vpi == 0)
+		return;
 	spin_lock_irq(&phba->hbalock);
 	clear_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used--;
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -113,7 +121,7 @@ lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	if (!pmb) {
 		return -ENOMEM;
 	}
-	mb = &pmb->mb;
+	mb = &pmb->u.mb;
 
 	lpfc_read_sparam(phba, pmb, vport->vpi);
 	/*
@@ -243,23 +251,22 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
 		    (vport->fc_flag & wait_flags)  ||
 		    ((vport->port_state > LPFC_VPORT_FAILED) &&
 		     (vport->port_state < LPFC_VPORT_READY))) {
-			lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 					"1833 Vport discovery quiesce Wait:"
-					" vpi x%x state x%x fc_flags x%x"
+					" state x%x fc_flags x%x"
 					" num_nodes x%x, waiting 1000 msecs"
 					" total wait msecs x%x\n",
-					vport->vpi, vport->port_state,
-					vport->fc_flag, vport->num_disc_nodes,
+					vport->port_state, vport->fc_flag,
+					vport->num_disc_nodes,
 					jiffies_to_msecs(jiffies - start_time));
 			msleep(1000);
 		} else {
 			/* Base case.  Wait variants satisfied.  Break out */
-			lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 					 "1834 Vport discovery quiesced:"
-					 " vpi x%x state x%x fc_flags x%x"
+					 " state x%x fc_flags x%x"
 					 " wait msecs x%x\n",
-					 vport->vpi, vport->port_state,
-					 vport->fc_flag,
+					 vport->port_state, vport->fc_flag,
 					 jiffies_to_msecs(jiffies
 						- start_time));
 			break;
@@ -267,12 +274,10 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
 	}
 
 	if (time_after(jiffies, wait_time_max))
-		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 				"1835 Vport discovery quiesce failed:"
-				" vpi x%x state x%x fc_flags x%x"
-				" wait msecs x%x\n",
-				vport->vpi, vport->port_state,
-				vport->fc_flag,
+				" state x%x fc_flags x%x wait msecs x%x\n",
+				vport->port_state, vport->fc_flag,
 				jiffies_to_msecs(jiffies - start_time));
 }
 
@@ -308,6 +313,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 		goto error_out;
 	}
 
+	/*
+	 * In SLI4, the vpi must be activated before it can be used
+	 * by the port.
+	 */
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_init_vpi(phba, vpi);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+					"1838 Failed to INIT_VPI on vpi %d "
+					"status %d\n", vpi, rc);
+			rc = VPORT_NORESOURCES;
+			lpfc_free_vpi(phba, vpi);
+			goto error_out;
+		}
+	}
 
 	/* Assign an unused board number */
 	if ((instance = lpfc_get_instance()) < 0) {
@@ -535,6 +555,16 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 				 "physical host\n");
 		return VPORT_ERROR;
 	}
+
+	/* If the vport is a static vport fail the deletion. */
+	if ((vport->vport_flag & STATIC_VPORT) &&
+		!(phba->pport->load_flag & FC_UNLOADING)) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+				 "1837 vport_delete failed: Cannot delete "
+				 "static vport.\n");
+		return VPORT_ERROR;
+	}
+
 	/*
 	 * If we are not unloading the driver then prevent the vport_delete
 	 * from happening until after this vport's discovery is finished.
@@ -710,7 +740,7 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba)
 	struct lpfc_vport *port_iterator;
 	struct lpfc_vport **vports;
 	int index = 0;
-	vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
+	vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
 			 GFP_KERNEL);
 	if (vports == NULL)
 		return NULL;
@@ -734,7 +764,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
 	int i;
 	if (vports == NULL)
 		return;
-	for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
+	for (i = 0; vports[i] != NULL && i <= phba->max_vports; i++)
 		scsi_host_put(lpfc_shost_from_vport(vports[i]));
 	kfree(vports);
 }
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 795201fa0b4..512c2cc1a33 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -469,7 +469,7 @@ typedef struct {
 	u8	type;		/* Type of the device */
 	u8	cur_status;	/* current status of the device */
 	u8	tag_depth;	/* Level of tagging */
-	u8	sync_neg;	/* sync negotiation - ENABLE or DISBALE */
+	u8	sync_neg;	/* sync negotiation - ENABLE or DISABLE */
 	u32	size;		/* configurable size in terms of 512 byte
 				   blocks */
 }__attribute__ ((packed)) phys_drv;
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index 170399ef06f..b25b74764ec 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -686,7 +686,7 @@ typedef struct {
  * @type	: Type of the device
  * @cur_status	: current status of the device
  * @tag_depth	: Level of tagging
- * @sync_neg	: sync negotiation - ENABLE or DISBALE
+ * @sync_neg	: sync negotiation - ENABLE or DISABLE
  * @size	: configurable size in terms of 512 byte
  */
 typedef struct {
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index babd4cc0cb2..286c185fa9e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -61,6 +61,7 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_sas.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
 
 #include "mpt2sas_debug.h"
 
@@ -68,10 +69,10 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"01.100.02.00"
-#define MPT2SAS_MAJOR_VERSION		00
+#define MPT2SAS_DRIVER_VERSION		"01.100.03.00"
+#define MPT2SAS_MAJOR_VERSION		01
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		02
+#define MPT2SAS_BUILD_VERSION		03
 #define MPT2SAS_RELEASE_VERSION		00
 
 /*
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index ba6ab170bdf..14e473d1fa7 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -473,7 +473,7 @@ _ctl_poll(struct file *filep, poll_table *wait)
 }
 
 /**
- * _ctl_do_task_abort - assign an active smid to the abort_task
+ * _ctl_set_task_mid - assign an active smid to tm request
  * @ioc: per adapter object
  * @karg - (struct mpt2_ioctl_command)
  * @tm_request - pointer to mf from user space
@@ -482,7 +482,7 @@ _ctl_poll(struct file *filep, poll_table *wait)
  * during failure, the reply frame is filled.
  */
 static int
-_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
+_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
     Mpi2SCSITaskManagementRequest_t *tm_request)
 {
 	u8 found = 0;
@@ -494,6 +494,14 @@ _ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 	Mpi2SCSITaskManagementReply_t *tm_reply;
 	u32 sz;
 	u32 lun;
+	char *desc = NULL;
+
+	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+		desc = "abort_task";
+	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+		desc = "query_task";
+	else
+		return 0;
 
 	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
 
@@ -517,13 +525,13 @@ _ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
 	if (!found) {
-		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
-		    "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
-		    tm_request->DevHandle, lun));
+		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
+		    desc, tm_request->DevHandle, lun));
 		tm_reply = ioc->ctl_cmds.reply;
 		tm_reply->DevHandle = tm_request->DevHandle;
 		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-		tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
+		tm_reply->TaskType = tm_request->TaskType;
 		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
 		tm_reply->VP_ID = tm_request->VP_ID;
 		tm_reply->VF_ID = tm_request->VF_ID;
@@ -535,9 +543,9 @@ _ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 		return 1;
 	}
 
-	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
-	    "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name,
-	    tm_request->DevHandle, lun, tm_request->TaskMID));
+	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+	    "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
+	    desc, tm_request->DevHandle, lun, tm_request->TaskMID));
 	return 0;
 }
 
@@ -739,8 +747,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
 
 		if (tm_request->TaskType ==
-		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+		    tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
+			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
 				mpt2sas_base_free_smid(ioc, smid);
 				goto out;
 			}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index e3a7967259e..2a01a5f2a84 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -197,12 +197,12 @@ static struct pci_device_id scsih_pci_table[] = {
 MODULE_DEVICE_TABLE(pci, scsih_pci_table);
 
 /**
- * scsih_set_debug_level - global setting of ioc->logging_level.
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
  *
  * Note: The logging levels are defined in mpt2sas_debug.h.
  */
 static int
-scsih_set_debug_level(const char *val, struct kernel_param *kp)
+_scsih_set_debug_level(const char *val, struct kernel_param *kp)
 {
 	int ret = param_set_int(val, kp);
 	struct MPT2SAS_ADAPTER *ioc;
@@ -215,7 +215,7 @@ scsih_set_debug_level(const char *val, struct kernel_param *kp)
 		ioc->logging_level = logging_level;
 	return 0;
 }
-module_param_call(logging_level, scsih_set_debug_level, param_get_int,
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
     &logging_level, 0644);
 
 /**
@@ -884,6 +884,41 @@ _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
 }
 
 /**
+ * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
+ * @ioc: per adapter object
+ * @id: target id
+ * @lun: lun number
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id:lun in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
+    unsigned int lun, int channel)
+{
+	u8 found;
+	unsigned long	flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	found = 0;
+	for (i = 0 ; i < ioc->request_depth; i++) {
+		if (ioc->scsi_lookup[i].scmd &&
+		    (ioc->scsi_lookup[i].scmd->device->id == id &&
+		    ioc->scsi_lookup[i].scmd->device->channel == channel &&
+		    ioc->scsi_lookup[i].scmd->device->lun == lun)) {
+			found = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return found;
+}
+
+/**
  * _scsih_get_chain_buffer_dma - obtain block of chains (dma address)
  * @ioc: per adapter object
  * @smid: system request message index
@@ -1047,14 +1082,14 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * scsih_change_queue_depth - setting device queue depth
+ * _scsih_change_queue_depth - setting device queue depth
  * @sdev: scsi device struct
  * @qdepth: requested queue depth
  *
  * Returns queue depth.
  */
 static int
-scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
 	struct Scsi_Host *shost = sdev->host;
 	int max_depth;
@@ -1079,14 +1114,14 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 }
 
 /**
- * scsih_change_queue_depth - changing device queue tag type
+ * _scsih_change_queue_depth - changing device queue tag type
  * @sdev: scsi device struct
  * @tag_type: requested tag type
  *
  * Returns queue tag type.
  */
 static int
-scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
+_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
 {
 	if (sdev->tagged_supported) {
 		scsi_set_tag_type(sdev, tag_type);
@@ -1101,14 +1136,14 @@ scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
 }
 
 /**
- * scsih_target_alloc - target add routine
+ * _scsih_target_alloc - target add routine
  * @starget: scsi target struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_target_alloc(struct scsi_target *starget)
+_scsih_target_alloc(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1163,13 +1198,13 @@ scsih_target_alloc(struct scsi_target *starget)
 }
 
 /**
- * scsih_target_destroy - target destroy routine
+ * _scsih_target_destroy - target destroy routine
  * @starget: scsi target struct
  *
  * Returns nothing.
  */
 static void
-scsih_target_destroy(struct scsi_target *starget)
+_scsih_target_destroy(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1212,14 +1247,14 @@ scsih_target_destroy(struct scsi_target *starget)
 }
 
 /**
- * scsih_slave_alloc - device add routine
+ * _scsih_slave_alloc - device add routine
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_alloc(struct scsi_device *sdev)
+_scsih_slave_alloc(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost;
 	struct MPT2SAS_ADAPTER *ioc;
@@ -1273,13 +1308,13 @@ scsih_slave_alloc(struct scsi_device *sdev)
 }
 
 /**
- * scsih_slave_destroy - device destroy routine
+ * _scsih_slave_destroy - device destroy routine
  * @sdev: scsi device struct
  *
  * Returns nothing.
  */
 static void
-scsih_slave_destroy(struct scsi_device *sdev)
+_scsih_slave_destroy(struct scsi_device *sdev)
 {
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct scsi_target *starget;
@@ -1295,13 +1330,13 @@ scsih_slave_destroy(struct scsi_device *sdev)
 }
 
 /**
- * scsih_display_sata_capabilities - sata capabilities
+ * _scsih_display_sata_capabilities - sata capabilities
  * @ioc: per adapter object
  * @sas_device: the sas_device object
  * @sdev: scsi device struct
  */
 static void
-scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
+_scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
     struct _sas_device *sas_device, struct scsi_device *sdev)
 {
 	Mpi2ConfigReply_t mpi_reply;
@@ -1401,14 +1436,14 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * scsih_slave_configure - device configure routine.
+ * _scsih_slave_configure - device configure routine.
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_configure(struct scsi_device *sdev)
+_scsih_slave_configure(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost = sdev->host;
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1489,7 +1524,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 		    r_level, raid_device->handle,
 		    (unsigned long long)raid_device->wwid,
 		    raid_device->num_pds, ds);
-		scsih_change_queue_depth(sdev, qdepth);
+		_scsih_change_queue_depth(sdev, qdepth);
 		return 0;
 	}
 
@@ -1532,10 +1567,10 @@ scsih_slave_configure(struct scsi_device *sdev)
 		    sas_device->slot);
 
 		if (!ssp_target)
-			scsih_display_sata_capabilities(ioc, sas_device, sdev);
+			_scsih_display_sata_capabilities(ioc, sas_device, sdev);
 	}
 
-	scsih_change_queue_depth(sdev, qdepth);
+	_scsih_change_queue_depth(sdev, qdepth);
 
 	if (ssp_target)
 		sas_read_port_mode_page(sdev);
@@ -1543,7 +1578,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 }
 
 /**
- * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * _scsih_bios_param - fetch head, sector, cylinder info for a disk
  * @sdev: scsi device struct
  * @bdev: pointer to block device context
  * @capacity: device size (in 512 byte sectors)
@@ -1555,7 +1590,7 @@ scsih_slave_configure(struct scsi_device *sdev)
  * Return nothing.
  */
 static int
-scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
     sector_t capacity, int params[])
 {
 	int		heads;
@@ -1636,7 +1671,7 @@ _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
 }
 
 /**
- * scsih_tm_done - tm completion routine
+ * _scsih_tm_done - tm completion routine
  * @ioc: per adapter object
  * @smid: system request message index
  * @VF_ID: virtual function id
@@ -1648,7 +1683,7 @@ _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
  * Return nothing.
  */
 static void
-scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 {
 	MPI2DefaultReply_t *mpi_reply;
 
@@ -1823,13 +1858,13 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 }
 
 /**
- * scsih_abort - eh threads main abort routine
+ * _scsih_abort - eh threads main abort routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_abort(struct scsi_cmnd *scmd)
+_scsih_abort(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1889,15 +1924,86 @@ scsih_abort(struct scsi_cmnd *scmd)
 	return r;
 }
 
+/**
+ * _scsih_dev_reset - eh threads main device reset routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT2SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u16	handle;
+	int r;
+
+	printk(MPT2SAS_INFO_FMT "attempting device reset! scmd(%p)\n",
+	    ioc->name, scmd);
+	scsi_print_command(scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+		    ioc->name, scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc,
+		   sas_device_priv_data->sas_target->handle);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	mpt2sas_scsih_issue_tm(ioc, handle, 0,
+	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, scmd->device->lun,
+	    30);
+
+	/*
+	 *  sanity check see whether all commands to this device been
+	 *  completed
+	 */
+	if (_scsih_scsi_lookup_find_by_lun(ioc, scmd->device->id,
+	    scmd->device->lun, scmd->device->channel))
+		r = FAILED;
+	else
+		r = SUCCESS;
+	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+	mutex_unlock(&ioc->tm_cmds.mutex);
+
+ out:
+	printk(MPT2SAS_INFO_FMT "device reset: %s scmd(%p)\n",
+	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	return r;
+}
 
 /**
- * scsih_dev_reset - eh threads main device reset routine
+ * _scsih_target_reset - eh threads main target reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_dev_reset(struct scsi_cmnd *scmd)
+_scsih_target_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1912,7 +2018,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 
 	sas_device_priv_data = scmd->device->hostdata;
 	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+		printk(MPT2SAS_INFO_FMT "target been deleted! scmd(%p)\n",
 		    ioc->name, scmd);
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
@@ -1962,13 +2068,13 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 }
 
 /**
- * scsih_abort - eh threads main host reset routine
+ * _scsih_abort - eh threads main host reset routine
  * @sdev: scsi device struct
  *
  * Returns SUCCESS if command aborted else FAILED
  */
 static int
-scsih_host_reset(struct scsi_cmnd *scmd)
+_scsih_host_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	int r, retval;
@@ -2390,7 +2496,107 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 }
 
 /**
- * scsih_qcmd - main scsi request entry point
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ *
+ * Supporting protection 1 and 3.
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
+{
+	u16 eedp_flags;
+	unsigned char prot_op = scsi_get_prot_op(scmd);
+	unsigned char prot_type = scsi_get_prot_type(scmd);
+
+	if (prot_type == SCSI_PROT_DIF_TYPE0 ||
+	   prot_type == SCSI_PROT_DIF_TYPE2 ||
+	   prot_op == SCSI_PROT_NORMAL)
+		return;
+
+	if (prot_op ==  SCSI_PROT_READ_STRIP)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+	else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+	else
+		return;
+
+	mpi_request->EEDPBlockSize = scmd->device->sector_size;
+
+	switch (prot_type) {
+	case SCSI_PROT_DIF_TYPE1:
+
+		/*
+		* enable ref/guard checking
+		* auto increment ref tag
+		*/
+		mpi_request->EEDPFlags = eedp_flags |
+		    MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+		    cpu_to_be32(scsi_get_lba(scmd));
+
+		break;
+
+	case SCSI_PROT_DIF_TYPE3:
+
+		/*
+		* enable guard checking
+		*/
+		mpi_request->EEDPFlags = eedp_flags |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+		break;
+	}
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ *
+ * Returns nothing
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+	u8 ascq;
+	u8 sk;
+	u8 host_byte;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		ascq = 0x01;
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		ascq = 0x02;
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		ascq = 0x03;
+		break;
+	default:
+		ascq = 0x00;
+		break;
+	}
+
+	if (scmd->sc_data_direction == DMA_TO_DEVICE) {
+		sk = ILLEGAL_REQUEST;
+		host_byte = DID_ABORT;
+	} else {
+		sk = ABORTED_COMMAND;
+		host_byte = DID_OK;
+	}
+
+	scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq);
+	scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) |
+	    SAM_STAT_CHECK_CONDITION;
+}
+
+/**
+ * _scsih_qcmd - main scsi request entry point
  * @scmd: pointer to scsi command object
  * @done: function pointer to be invoked on completion
  *
@@ -2401,7 +2607,7 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
 static int
-scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -2470,6 +2676,7 @@ scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	}
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 	memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+	_scsih_setup_eedp(scmd, mpi_request);
 	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
 	if (sas_device_priv_data->sas_target->flags &
 	    MPT_TARGET_FLAGS_RAID_COMPONENT)
@@ -2604,6 +2811,15 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
 		desc_ioc_state = "scsi ext terminated";
 		break;
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc_ioc_state = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc_ioc_state = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc_ioc_state = "eedp app tag error";
+		break;
 	default:
 		desc_ioc_state = "unknown";
 		break;
@@ -2783,7 +2999,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 }
 
 /**
- * scsih_io_done - scsi request callback
+ * _scsih_io_done - scsi request callback
  * @ioc: per adapter object
  * @smid: system request message index
  * @VF_ID: virtual function id
@@ -2794,7 +3010,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * Return nothing.
  */
 static void
-scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 {
 	Mpi2SCSIIORequest_t *mpi_request;
 	Mpi2SCSIIOReply_t *mpi_reply;
@@ -2939,6 +3155,11 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 			scmd->result = DID_RESET << 16;
 		break;
 
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		_scsih_eedp_error_handling(scmd, ioc_status);
+		break;
 	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
 	case MPI2_IOCSTATUS_INVALID_FUNCTION:
 	case MPI2_IOCSTATUS_INVALID_SGL:
@@ -5130,18 +5351,19 @@ static struct scsi_host_template scsih_driver_template = {
 	.module				= THIS_MODULE,
 	.name				= "Fusion MPT SAS Host",
 	.proc_name			= MPT2SAS_DRIVER_NAME,
-	.queuecommand			= scsih_qcmd,
-	.target_alloc			= scsih_target_alloc,
-	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
-	.target_destroy			= scsih_target_destroy,
-	.slave_destroy			= scsih_slave_destroy,
-	.change_queue_depth 		= scsih_change_queue_depth,
-	.change_queue_type		= scsih_change_queue_type,
-	.eh_abort_handler		= scsih_abort,
-	.eh_device_reset_handler	= scsih_dev_reset,
-	.eh_host_reset_handler		= scsih_host_reset,
-	.bios_param			= scsih_bios_param,
+	.queuecommand			= _scsih_qcmd,
+	.target_alloc			= _scsih_target_alloc,
+	.slave_alloc			= _scsih_slave_alloc,
+	.slave_configure		= _scsih_slave_configure,
+	.target_destroy			= _scsih_target_destroy,
+	.slave_destroy			= _scsih_slave_destroy,
+	.change_queue_depth 		= _scsih_change_queue_depth,
+	.change_queue_type		= _scsih_change_queue_type,
+	.eh_abort_handler		= _scsih_abort,
+	.eh_device_reset_handler	= _scsih_dev_reset,
+	.eh_target_reset_handler	= _scsih_target_reset,
+	.eh_host_reset_handler		= _scsih_host_reset,
+	.bios_param			= _scsih_bios_param,
 	.can_queue			= 1,
 	.this_id			= -1,
 	.sg_tablesize			= MPT2SAS_SG_DEPTH,
@@ -5228,13 +5450,13 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * scsih_remove - detach and remove add host
+ * _scsih_remove - detach and remove add host
  * @pdev: PCI device struct
  *
  * Return nothing.
  */
 static void __devexit
-scsih_remove(struct pci_dev *pdev)
+_scsih_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5442,14 +5664,14 @@ _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
- * scsih_probe - attach and add scsi host
+ * _scsih_probe - attach and add scsi host
  * @pdev: PCI device struct
  * @id: pci device id
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct MPT2SAS_ADAPTER *ioc;
 	struct Scsi_Host *shost;
@@ -5503,6 +5725,9 @@ scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_add_shost_fail;
 	}
 
+	scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+	    | SHOST_DIF_TYPE3_PROTECTION);
+
 	/* event thread */
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
 	    "fw_event%d", ioc->id);
@@ -5536,14 +5761,14 @@ scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 #ifdef CONFIG_PM
 /**
- * scsih_suspend - power management suspend main entry point
+ * _scsih_suspend - power management suspend main entry point
  * @pdev: PCI device struct
  * @state: PM state change to (usually PCI_D3)
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5564,13 +5789,13 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 }
 
 /**
- * scsih_resume - power management resume main entry point
+ * _scsih_resume - power management resume main entry point
  * @pdev: PCI device struct
  *
  * Returns 0 success, anything else error.
  */
 static int
-scsih_resume(struct pci_dev *pdev)
+_scsih_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5599,22 +5824,22 @@ scsih_resume(struct pci_dev *pdev)
 static struct pci_driver scsih_driver = {
 	.name		= MPT2SAS_DRIVER_NAME,
 	.id_table	= scsih_pci_table,
-	.probe		= scsih_probe,
-	.remove		= __devexit_p(scsih_remove),
+	.probe		= _scsih_probe,
+	.remove		= __devexit_p(_scsih_remove),
 #ifdef CONFIG_PM
-	.suspend	= scsih_suspend,
-	.resume		= scsih_resume,
+	.suspend	= _scsih_suspend,
+	.resume		= _scsih_resume,
 #endif
 };
 
 
 /**
- * scsih_init - main entry point for this driver.
+ * _scsih_init - main entry point for this driver.
  *
  * Returns 0 success, anything else error.
  */
 static int __init
-scsih_init(void)
+_scsih_init(void)
 {
 	int error;
 
@@ -5630,10 +5855,10 @@ scsih_init(void)
 	mpt2sas_base_initialize_callback_handler();
 
 	 /* queuecommand callback hander */
-	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done);
+	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
 
 	/* task managment callback handler */
-	tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done);
+	tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
 
 	/* base internal commands callback handler */
 	base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
@@ -5659,12 +5884,12 @@ scsih_init(void)
 }
 
 /**
- * scsih_exit - exit point for this driver (when it is a module).
+ * _scsih_exit - exit point for this driver (when it is a module).
  *
  * Returns 0 success, anything else error.
  */
 static void __exit
-scsih_exit(void)
+_scsih_exit(void)
 {
 	printk(KERN_INFO "mpt2sas version %s unloading\n",
 	    MPT2SAS_DRIVER_VERSION);
@@ -5682,5 +5907,5 @@ scsih_exit(void)
 	mpt2sas_ctl_exit();
 }
 
-module_init(scsih_init);
-module_exit(scsih_exit);
+module_init(_scsih_init);
+module_exit(_scsih_exit);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index e03dc0b1e1a..686695b155c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -264,7 +264,7 @@ struct rep_manu_reply{
 };
 
 /**
- * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
  * @ioc: per adapter object
  * @sas_address: expander sas address
  * @edev: the sas_expander_device object
@@ -274,7 +274,7 @@ struct rep_manu_reply{
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
+_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
     u64 sas_address, struct sas_expander_device *edev)
 {
 	Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -578,7 +578,7 @@ mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
 	    mpt2sas_port->remote_identify.device_type ==
 	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
-		transport_expander_report_manufacture(ioc,
+		_transport_expander_report_manufacture(ioc,
 		    mpt2sas_port->remote_identify.sas_address,
 		    rphy_to_expander_device(rphy));
 
@@ -852,7 +852,7 @@ rphy_to_ioc(struct sas_rphy *rphy)
 }
 
 /**
- * transport_get_linkerrors -
+ * _transport_get_linkerrors -
  * @phy: The sas phy object
  *
  * Only support sas_host direct attached phys.
@@ -860,7 +860,7 @@ rphy_to_ioc(struct sas_rphy *rphy)
  *
  */
 static int
-transport_get_linkerrors(struct sas_phy *phy)
+_transport_get_linkerrors(struct sas_phy *phy)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -903,14 +903,14 @@ transport_get_linkerrors(struct sas_phy *phy)
 }
 
 /**
- * transport_get_enclosure_identifier -
+ * _transport_get_enclosure_identifier -
  * @phy: The sas phy object
  *
  * Obtain the enclosure logical id for an expander.
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_node *sas_expander;
@@ -929,13 +929,13 @@ transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 }
 
 /**
- * transport_get_bay_identifier -
+ * _transport_get_bay_identifier -
  * @phy: The sas phy object
  *
  * Returns the slot id for a device that resides inside an enclosure.
  */
 static int
-transport_get_bay_identifier(struct sas_rphy *rphy)
+_transport_get_bay_identifier(struct sas_rphy *rphy)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_device *sas_device;
@@ -953,7 +953,7 @@ transport_get_bay_identifier(struct sas_rphy *rphy)
 }
 
 /**
- * transport_phy_reset -
+ * _transport_phy_reset -
  * @phy: The sas phy object
  * @hard_reset:
  *
@@ -961,7 +961,7 @@ transport_get_bay_identifier(struct sas_rphy *rphy)
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_phy_reset(struct sas_phy *phy, int hard_reset)
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -1002,7 +1002,7 @@ transport_phy_reset(struct sas_phy *phy, int hard_reset)
 }
 
 /**
- * transport_smp_handler - transport portal for smp passthru
+ * _transport_smp_handler - transport portal for smp passthru
  * @shost: shost object
  * @rphy: sas transport rphy object
  * @req:
@@ -1012,7 +1012,7 @@ transport_phy_reset(struct sas_phy *phy, int hard_reset)
  *           smp_rep_general /sys/class/bsg/expander-5:0
  */
 static int
-transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
     struct request *req)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1041,7 +1041,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, "
 		    "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt,
-		    req->data_len, rsp->bio->bi_vcnt, rsp->data_len);
+		    blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
 		return -EINVAL;
 	}
 
@@ -1104,7 +1104,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	*((u64 *)&mpi_request->SASAddress) = (rphy) ?
 	    cpu_to_le64(rphy->identify.sas_address) :
 	    cpu_to_le64(ioc->sas_hba.sas_address);
-	mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4);
+	mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
 	psge = &mpi_request->SGL;
 
 	/* WRITE sgel first */
@@ -1112,13 +1112,13 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
 	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
 	dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
-	      req->data_len, PCI_DMA_BIDIRECTIONAL);
+		blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_out) {
 		mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
 		goto unmap;
 	}
 
-	ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4),
+	ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4),
 	    dma_addr_out);
 
 	/* incr sgel */
@@ -1129,14 +1129,14 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
 	    MPI2_SGE_FLAGS_END_OF_LIST);
 	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	dma_addr_in =  pci_map_single(ioc->pdev, bio_data(rsp->bio),
-	      rsp->data_len, PCI_DMA_BIDIRECTIONAL);
+	dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
+				     blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
 	if (!dma_addr_in) {
 		mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
 		goto unmap;
 	}
 
-	ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4),
+	ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4),
 	    dma_addr_in);
 
 	dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
@@ -1170,9 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 		memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
 		req->sense_len = sizeof(*mpi_reply);
-		req->data_len = 0;
-		rsp->data_len -= mpi_reply->ResponseDataLength;
-
+		req->resid_len = 0;
+		rsp->resid_len -= mpi_reply->ResponseDataLength;
 	} else {
 		dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
 		    "%s - no reply\n", ioc->name, __func__));
@@ -1188,10 +1187,10 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
  unmap:
 	if (dma_addr_out)
-		pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len,
+		pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
 		    PCI_DMA_BIDIRECTIONAL);
 	if (dma_addr_in)
-		pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len,
+		pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
 		    PCI_DMA_BIDIRECTIONAL);
 
  out:
@@ -1201,11 +1200,11 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 }
 
 struct sas_function_template mpt2sas_transport_functions = {
-	.get_linkerrors		= transport_get_linkerrors,
-	.get_enclosure_identifier = transport_get_enclosure_identifier,
-	.get_bay_identifier	= transport_get_bay_identifier,
-	.phy_reset		= transport_phy_reset,
-	.smp_handler		= transport_smp_handler,
+	.get_linkerrors		= _transport_get_linkerrors,
+	.get_enclosure_identifier = _transport_get_enclosure_identifier,
+	.get_bay_identifier	= _transport_get_bay_identifier,
+	.phy_reset		= _transport_phy_reset,
+	.smp_handler		= _transport_smp_handler,
 };
 
 struct scsi_transport_template *mpt2sas_transport_template;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
deleted file mode 100644
index e4acebd10d1..00000000000
--- a/drivers/scsi/mvsas.c
+++ /dev/null
@@ -1,3222 +0,0 @@
-/*
-	mvsas.c - Marvell 88SE6440 SAS/SATA support
-
-	Copyright 2007 Red Hat, Inc.
-	Copyright 2008 Marvell. <kewei@marvell.com>
-
-	This program is free software; you can redistribute it and/or
-	modify it under the terms of the GNU General Public License as
-	published by the Free Software Foundation; either version 2,
-	or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty
-	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-	See the GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public
-	License along with this program; see the file COPYING.	If not,
-	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
-	MA 02139, USA.
-
-	---------------------------------------------------------------
-
-	Random notes:
-	* hardware supports controlling the endian-ness of data
-	  structures.  this permits elimination of all the le32_to_cpu()
-	  and cpu_to_le32() conversions.
-
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <scsi/libsas.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/sas_ata.h>
-#include <asm/io.h>
-
-#define DRV_NAME	"mvsas"
-#define DRV_VERSION	"0.5.2"
-#define _MV_DUMP	0
-#define MVS_DISABLE_NVRAM
-#define MVS_DISABLE_MSI
-
-#define mr32(reg)	readl(regs + MVS_##reg)
-#define mw32(reg,val)	writel((val), regs + MVS_##reg)
-#define mw32_f(reg,val)	do {			\
-	writel((val), regs + MVS_##reg);	\
-	readl(regs + MVS_##reg);		\
-	} while (0)
-
-#define MVS_ID_NOT_MAPPED	0x7f
-#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
-
-/* offset for D2H FIS in the Received FIS List Structure */
-#define SATA_RECEIVED_D2H_FIS(reg_set)	\
-	((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x40)
-#define SATA_RECEIVED_PIO_FIS(reg_set)	\
-	((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x20)
-#define UNASSOC_D2H_FIS(id)		\
-	((void *) mvi->rx_fis + 0x100 * id)
-
-#define for_each_phy(__lseq_mask, __mc, __lseq, __rest)			\
-	for ((__mc) = (__lseq_mask), (__lseq) = 0;			\
-					(__mc) != 0 && __rest;		\
-					(++__lseq), (__mc) >>= 1)
-
-/* driver compile-time configuration */
-enum driver_configuration {
-	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
-	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
-					/* software requires power-of-2
-					   ring size */
-
-	MVS_SLOTS		= 512,	/* command slots */
-	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
-	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
-	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
-	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
-
-	MVS_RX_FIS_COUNT	= 17,	/* Optional rx'd FISs (max 17) */
-
-	MVS_QUEUE_SIZE		= 30,	/* Support Queue depth */
-	MVS_CAN_QUEUE		= MVS_SLOTS - 1,	/* SCSI Queue depth */
-};
-
-/* unchangeable hardware details */
-enum hardware_details {
-	MVS_MAX_PHYS		= 8,	/* max. possible phys */
-	MVS_MAX_PORTS		= 8,	/* max. possible ports */
-	MVS_RX_FISL_SZ		= 0x400 + (MVS_RX_FIS_COUNT * 0x100),
-};
-
-/* peripheral registers (BAR2) */
-enum peripheral_registers {
-	SPI_CTL			= 0x10,	/* EEPROM control */
-	SPI_CMD			= 0x14,	/* EEPROM command */
-	SPI_DATA		= 0x18, /* EEPROM data */
-};
-
-enum peripheral_register_bits {
-	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
-	TWSI_RD			= (1U << 4),	/* EEPROM read access */
-
-	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
-};
-
-/* enhanced mode registers (BAR4) */
-enum hw_registers {
-	MVS_GBL_CTL		= 0x04,  /* global control */
-	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
-	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
-	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
-
-	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
-	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
-	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
-	MVS_CMD_LIST_HI		= 0x10C,
-	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
-	MVS_RX_FIS_HI		= 0x114,
-
-	MVS_TX_CFG		= 0x120, /* TX configuration */
-	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
-	MVS_TX_HI		= 0x128,
-
-	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
-	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
-	MVS_RX_CFG		= 0x134, /* RX configuration */
-	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
-	MVS_RX_HI		= 0x13C,
-	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
-
-	MVS_INT_COAL		= 0x148, /* Int coalescing config */
-	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
-	MVS_INT_STAT		= 0x150, /* Central int status */
-	MVS_INT_MASK		= 0x154, /* Central int enable */
-	MVS_INT_STAT_SRS	= 0x158, /* SATA register set status */
-	MVS_INT_MASK_SRS	= 0x15C,
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
-	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
-	MVS_P4_INT_STAT		= 0x200, /* Port 4 interrupt status */
-	MVS_P4_INT_MASK		= 0x204, /* Port 4 interrupt enable mask */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
-	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
-
-	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
-	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
-	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
-	MVS_P4_CFG_ADDR		= 0x230, /* Port 4 config address */
-	MVS_P4_CFG_DATA		= 0x234, /* Port 4 config data */
-
-					 /* ports 1-3 follow after this */
-	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
-	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
-	MVS_P4_VSR_ADDR		= 0x250, /* port 4 VSR addr */
-	MVS_P4_VSR_DATA		= 0x254, /* port 4 VSR data */
-};
-
-enum hw_register_bits {
-	/* MVS_GBL_CTL */
-	INT_EN			= (1U << 1),	/* Global int enable */
-	HBA_RST			= (1U << 0),	/* HBA reset */
-
-	/* MVS_GBL_INT_STAT */
-	INT_XOR			= (1U << 4),	/* XOR engine event */
-	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
-
-	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
-	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
-	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
-	MODE_AUTO_DET_PORT6 = (1U << 14),
-	MODE_AUTO_DET_PORT5 = (1U << 13),
-	MODE_AUTO_DET_PORT4 = (1U << 12),
-	MODE_AUTO_DET_PORT3 = (1U << 11),
-	MODE_AUTO_DET_PORT2 = (1U << 10),
-	MODE_AUTO_DET_PORT1 = (1U << 9),
-	MODE_AUTO_DET_PORT0 = (1U << 8),
-	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
-				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
-				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
-				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
-	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
-	MODE_SAS_PORT6_MASK = (1U << 6),
-	MODE_SAS_PORT5_MASK = (1U << 5),
-	MODE_SAS_PORT4_MASK = (1U << 4),
-	MODE_SAS_PORT3_MASK = (1U << 3),
-	MODE_SAS_PORT2_MASK = (1U << 2),
-	MODE_SAS_PORT1_MASK = (1U << 1),
-	MODE_SAS_PORT0_MASK = (1U << 0),
-	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
-				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
-				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
-				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
-
-				/* SAS_MODE value may be
-				 * dictated (in hw) by values
-				 * of SATA_TARGET & AUTO_DET
-				 */
-
-	/* MVS_TX_CFG */
-	TX_EN			= (1U << 16),	/* Enable TX */
-	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
-
-	/* MVS_RX_CFG */
-	RX_EN			= (1U << 16),	/* Enable RX */
-	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
-
-	/* MVS_INT_COAL */
-	COAL_EN			= (1U << 16),	/* Enable int coalescing */
-
-	/* MVS_INT_STAT, MVS_INT_MASK */
-	CINT_I2C		= (1U << 31),	/* I2C event */
-	CINT_SW0		= (1U << 30),	/* software event 0 */
-	CINT_SW1		= (1U << 29),	/* software event 1 */
-	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
-	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
-	CINT_MEM		= (1U << 26),	/* int mem parity err */
-	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
-	CINT_SRS		= (1U << 3),	/* SRS event */
-	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
-	CINT_DONE		= (1U << 0),	/* cmd completion */
-
-						/* shl for ports 1-3 */
-	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
-	CINT_PORT		= (1U << 8),	/* port0 event */
-	CINT_PORT_MASK_OFFSET	= 8,
-	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
-
-	/* TX (delivery) ring bits */
-	TXQ_CMD_SHIFT		= 29,
-	TXQ_CMD_SSP		= 1,		/* SSP protocol */
-	TXQ_CMD_SMP		= 2,		/* SMP protocol */
-	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
-	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
-	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
-	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
-	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
-	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
-	TXQ_SRS_MASK		= 0x7f,
-	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
-	TXQ_PHY_MASK		= 0xff,
-	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
-
-	/* RX (completion) ring bits */
-	RXQ_GOOD		= (1U << 23),	/* Response good */
-	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
-	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
-	RXQ_ATTN		= (1U << 19),	/* attention */
-	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
-	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
-	RXQ_DONE		= (1U << 16),	/* cmd complete */
-	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
-
-	/* mvs_cmd_hdr bits */
-	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
-	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
-
-						/* SSP initiator only */
-	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
-
-						/* SSP initiator or target */
-	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
-
-						/* SSP target only */
-	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
-	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
-	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
-	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
-
-	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
-	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
-	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
-	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
-	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
-	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
-	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
-	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
-	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
-	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
-
-	CCTL_RST		= (1U << 5),	/* port logic reset */
-
-						/* 0(LSB first), 1(MSB first) */
-	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
-	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
-	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
-	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
-
-	/* MVS_Px_SER_CTLSTAT (per-phy control) */
-	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
-	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
-	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
-	PHY_RST			= (1U << 0),	/* phy reset */
-	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
-	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
-	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
-	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
-			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
-	PHY_READY_MASK		= (1U << 20),
-
-	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
-	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
-	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
-	PHYEV_AN		= (1U << 18),	/* SATA async notification */
-	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
-	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
-	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
-	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
-	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
-	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
-	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
-	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
-	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
-	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
-	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
-	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
-	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
-	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
-	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
-
-	/* MVS_PCS */
-	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
-	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
-	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6480 */
-	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
-	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
-	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
-	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
-	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
-	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
-	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
-
-	/* Port n Attached Device Info */
-	PORT_DEV_SSP_TRGT	= (1U << 19),
-	PORT_DEV_SMP_TRGT	= (1U << 18),
-	PORT_DEV_STP_TRGT	= (1U << 17),
-	PORT_DEV_SSP_INIT	= (1U << 11),
-	PORT_DEV_SMP_INIT	= (1U << 10),
-	PORT_DEV_STP_INIT	= (1U << 9),
-	PORT_PHY_ID_MASK	= (0xFFU << 24),
-	PORT_DEV_TRGT_MASK	= (0x7U << 17),
-	PORT_DEV_INIT_MASK	= (0x7U << 9),
-	PORT_DEV_TYPE_MASK	= (0x7U << 0),
-
-	/* Port n PHY Status */
-	PHY_RDY			= (1U << 2),
-	PHY_DW_SYNC		= (1U << 1),
-	PHY_OOB_DTCTD		= (1U << 0),
-
-	/* VSR */
-	/* PHYMODE 6 (CDB) */
-	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
-	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
-	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
-	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
-	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
-	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
-	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
-	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
-	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
-	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
-	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
-	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
-	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
-	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
-};
-
-enum mvs_info_flags {
-	MVF_MSI			= (1U << 0),	/* MSI is enabled */
-	MVF_PHY_PWR_FIX		= (1U << 1),	/* bug workaround */
-};
-
-enum sas_cmd_port_registers {
-	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
-	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
-	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
-	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
-	CMD_OOB_SPACE		= 0x110, /* OOB space control register */
-	CMD_OOB_BURST		= 0x114, /* OOB burst control register */
-	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
-	CMD_PHY_CONFIG0		= 0x11c, /* PHY config register 0 */
-	CMD_PHY_CONFIG1		= 0x120, /* PHY config register 1 */
-	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
-	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
-	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
-	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
-	CMD_ID_TEST		= 0x134, /* ID test register */
-	CMD_PL_TIMER		= 0x138, /* PL timer register */
-	CMD_WD_TIMER		= 0x13c, /* WD timer register */
-	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
-	CMD_APP_MEM_CTL		= 0x144, /* Application Memory Control */
-	CMD_XOR_MEM_CTL		= 0x148, /* XOR Block Memory Control */
-	CMD_DMA_MEM_CTL		= 0x14c, /* DMA Block Memory Control */
-	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
-	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
-	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
-	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
-	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
-	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
-	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
-	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
-	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
-	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
-	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
-	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
-	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
-	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
-	CMD_RESET_COUNT		= 0x188, /* Reset Count */
-	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
-	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
-	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
-	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
-	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
-	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
-	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
-	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
-	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
-	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
-	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
-	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
-	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
-	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
-	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
-};
-
-/* SAS/SATA configuration port registers, aka phy registers */
-enum sas_sata_config_port_regs {
-	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
-	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
-	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
-	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
-	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
-	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
-	PHYR_SATA_CTL		= 0x18,	/* SATA control */
-	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
-	PHYR_SATA_SIG0		= 0x20,	/*port SATA signature FIS(Byte 0-3) */
-	PHYR_SATA_SIG1		= 0x24,	/*port SATA signature FIS(Byte 4-7) */
-	PHYR_SATA_SIG2		= 0x28,	/*port SATA signature FIS(Byte 8-11) */
-	PHYR_SATA_SIG3		= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
-	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
-	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
-	PHYR_WIDE_PORT		= 0x38,	/* wide port participating */
-	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
-	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
-	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
-};
-
-/*  SAS/SATA Vendor Specific Port Registers */
-enum sas_sata_vsp_regs {
-	VSR_PHY_STAT		= 0x00, /* Phy Status */
-	VSR_PHY_MODE1		= 0x01, /* phy tx */
-	VSR_PHY_MODE2		= 0x02, /* tx scc */
-	VSR_PHY_MODE3		= 0x03, /* pll */
-	VSR_PHY_MODE4		= 0x04, /* VCO */
-	VSR_PHY_MODE5		= 0x05, /* Rx */
-	VSR_PHY_MODE6		= 0x06, /* CDR */
-	VSR_PHY_MODE7		= 0x07, /* Impedance */
-	VSR_PHY_MODE8		= 0x08, /* Voltage */
-	VSR_PHY_MODE9		= 0x09, /* Test */
-	VSR_PHY_MODE10		= 0x0A, /* Power */
-	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
-	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
-	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
-};
-
-enum pci_cfg_registers {
-	PCR_PHY_CTL	= 0x40,
-	PCR_PHY_CTL2	= 0x90,
-	PCR_DEV_CTRL	= 0xE8,
-};
-
-enum pci_cfg_register_bits {
-	PCTL_PWR_ON	= (0xFU << 24),
-	PCTL_OFF	= (0xFU << 12),
-	PRD_REQ_SIZE	= (0x4000),
-	PRD_REQ_MASK	= (0x00007000),
-};
-
-enum nvram_layout_offsets {
-	NVR_SIG		= 0x00,		/* 0xAA, 0x55 */
-	NVR_SAS_ADDR	= 0x02,		/* 8-byte SAS address */
-};
-
-enum chip_flavors {
-	chip_6320,
-	chip_6440,
-	chip_6480,
-};
-
-enum port_type {
-	PORT_TYPE_SAS	=  (1L << 1),
-	PORT_TYPE_SATA	=  (1L << 0),
-};
-
-/* Command Table Format */
-enum ct_format {
-	/* SSP */
-	SSP_F_H		=  0x00,
-	SSP_F_IU	=  0x18,
-	SSP_F_MAX	=  0x4D,
-	/* STP */
-	STP_CMD_FIS	=  0x00,
-	STP_ATAPI_CMD	=  0x40,
-	STP_F_MAX	=  0x10,
-	/* SMP */
-	SMP_F_T		=  0x00,
-	SMP_F_DEP	=  0x01,
-	SMP_F_MAX	=  0x101,
-};
-
-enum status_buffer {
-	SB_EIR_OFF	=  0x00,	/* Error Information Record */
-	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
-	SB_RFB_MAX	=  0x400,	/* RFB size*/
-};
-
-enum error_info_rec {
-	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
-	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
-	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
-	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
-	UNK_FIS 	= (1U << 27),	/* unknown FIS */
-	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
-	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
-	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
-	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
-	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
-	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
-	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
-	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
-	INTERLOCK	= (1U << 15),	/* interlock error */
-	NAK		= (1U << 14),	/* NAK rx'd */
-	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
-	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
-	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
-	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
-	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
-	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
-	BREAK		= (1U << 7),	/* break received */
-	BAD_DEST	= (1U << 6),	/* bad destination */
-	BAD_PROTO	= (1U << 5),	/* protocol not supported */
-	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
-	WRONG_DEST	= (1U << 3),	/* wrong destination error */
-	CREDIT_TO	= (1U << 2),	/* credit timeout */
-	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
-	BUF_PAR 	= (1U << 0),	/* buffer parity error */
-};
-
-enum error_info_rec_2 {
-	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
-	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
-	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
-	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
-	USR_BLK_NM	= (1U << 0),	/* User Block Number */
-};
-
-struct mvs_chip_info {
-	u32		n_phy;
-	u32		srs_sz;
-	u32		slot_width;
-};
-
-struct mvs_err_info {
-	__le32			flags;
-	__le32			flags2;
-};
-
-struct mvs_prd {
-	__le64			addr;		/* 64-bit buffer address */
-	__le32			reserved;
-	__le32			len;		/* 16-bit length */
-};
-
-struct mvs_cmd_hdr {
-	__le32			flags;		/* PRD tbl len; SAS, SATA ctl */
-	__le32			lens;		/* cmd, max resp frame len */
-	__le32			tags;		/* targ port xfer tag; tag */
-	__le32			data_len;	/* data xfer len */
-	__le64			cmd_tbl;	/* command table address */
-	__le64			open_frame;	/* open addr frame address */
-	__le64			status_buf;	/* status buffer address */
-	__le64			prd_tbl;	/* PRD tbl address */
-	__le32			reserved[4];
-};
-
-struct mvs_port {
-	struct asd_sas_port	sas_port;
-	u8			port_attached;
-	u8			taskfileset;
-	u8			wide_port_phymap;
-	struct list_head	list;
-};
-
-struct mvs_phy {
-	struct mvs_port		*port;
-	struct asd_sas_phy	sas_phy;
-	struct sas_identify	identify;
-	struct scsi_device	*sdev;
-	u64		dev_sas_addr;
-	u64		att_dev_sas_addr;
-	u32		att_dev_info;
-	u32		dev_info;
-	u32		phy_type;
-	u32		phy_status;
-	u32		irq_status;
-	u32		frame_rcvd_size;
-	u8		frame_rcvd[32];
-	u8		phy_attached;
-	enum sas_linkrate	minimum_linkrate;
-	enum sas_linkrate	maximum_linkrate;
-};
-
-struct mvs_slot_info {
-	struct list_head	list;
-	struct sas_task		*task;
-	u32			n_elem;
-	u32			tx;
-
-	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
-	 * and PRD table
-	 */
-	void			*buf;
-	dma_addr_t		buf_dma;
-#if _MV_DUMP
-	u32			cmd_size;
-#endif
-
-	void			*response;
-	struct mvs_port		*port;
-};
-
-struct mvs_info {
-	unsigned long		flags;
-
-	spinlock_t		lock;		/* host-wide lock */
-	struct pci_dev		*pdev;		/* our device */
-	void __iomem		*regs;		/* enhanced mode registers */
-	void __iomem		*peri_regs;	/* peripheral registers */
-
-	u8			sas_addr[SAS_ADDR_SIZE];
-	struct sas_ha_struct	sas;		/* SCSI/SAS glue */
-	struct Scsi_Host	*shost;
-
-	__le32			*tx;		/* TX (delivery) DMA ring */
-	dma_addr_t		tx_dma;
-	u32			tx_prod;	/* cached next-producer idx */
-
-	__le32			*rx;		/* RX (completion) DMA ring */
-	dma_addr_t		rx_dma;
-	u32			rx_cons;	/* RX consumer idx */
-
-	__le32			*rx_fis;	/* RX'd FIS area */
-	dma_addr_t		rx_fis_dma;
-
-	struct mvs_cmd_hdr	*slot;	/* DMA command header slots */
-	dma_addr_t		slot_dma;
-
-	const struct mvs_chip_info *chip;
-
-	u8			tags[MVS_SLOTS];
-	struct mvs_slot_info	slot_info[MVS_SLOTS];
-				/* further per-slot information */
-	struct mvs_phy		phy[MVS_MAX_PHYS];
-	struct mvs_port		port[MVS_MAX_PHYS];
-#ifdef MVS_USE_TASKLET
-	struct tasklet_struct	tasklet;
-#endif
-};
-
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
-			   void *funcdata);
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port);
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port);
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val);
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port);
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
-static void mvs_detect_porttype(struct mvs_info *mvi, int i);
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
-static void mvs_release_task(struct mvs_info *mvi, int phy_no);
-
-static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
-static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_slave_configure(struct scsi_device *sdev);
-
-static struct scsi_transport_template *mvs_stt;
-
-static const struct mvs_chip_info mvs_chips[] = {
-	[chip_6320] =		{ 2, 16, 9  },
-	[chip_6440] =		{ 4, 16, 9  },
-	[chip_6480] =		{ 8, 32, 10 },
-};
-
-static struct scsi_host_template mvs_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.queuecommand		= sas_queuecommand,
-	.target_alloc		= sas_target_alloc,
-	.slave_configure	= mvs_slave_configure,
-	.slave_destroy		= sas_slave_destroy,
-	.scan_finished		= mvs_scan_finished,
-	.scan_start		= mvs_scan_start,
-	.change_queue_depth	= sas_change_queue_depth,
-	.change_queue_type	= sas_change_queue_type,
-	.bios_param		= sas_bios_param,
-	.can_queue		= 1,
-	.cmd_per_lun		= 1,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.eh_device_reset_handler	= sas_eh_device_reset_handler,
-	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
-	.slave_alloc		= sas_slave_alloc,
-	.target_destroy		= sas_target_destroy,
-	.ioctl			= sas_ioctl,
-};
-
-static void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
-{
-	u32 i;
-	u32 run;
-	u32 offset;
-
-	offset = 0;
-	while (size) {
-		printk("%08X : ", baseaddr + offset);
-		if (size >= 16)
-			run = 16;
-		else
-			run = size;
-		size -= run;
-		for (i = 0; i < 16; i++) {
-			if (i < run)
-				printk("%02X ", (u32)data[i]);
-			else
-				printk("   ");
-		}
-		printk(": ");
-		for (i = 0; i < run; i++)
-			printk("%c", isalnum(data[i]) ? data[i] : '.');
-		printk("\n");
-		data = &data[16];
-		offset += run;
-	}
-	printk("\n");
-}
-
-#if _MV_DUMP
-static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
-				   enum sas_protocol proto)
-{
-	u32 offset;
-	struct pci_dev *pdev = mvi->pdev;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
-	offset = slot->cmd_size + MVS_OAF_SZ +
-	    sizeof(struct mvs_prd) * slot->n_elem;
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Status buffer[%d] :\n",
-			tag);
-	mvs_hexdump(32, (u8 *) slot->response,
-		    (u32) slot->buf_dma + offset);
-}
-#endif
-
-static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
-				enum sas_protocol proto)
-{
-#if _MV_DUMP
-	u32 sz, w_ptr;
-	u64 addr;
-	void __iomem *regs = mvi->regs;
-	struct pci_dev *pdev = mvi->pdev;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
-	/*Delivery Queue */
-	sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
-	w_ptr = slot->tx;
-	addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Delivery Queue Base Address=0x%llX (PA)"
-		"(tx_dma=0x%llX), Entry=%04d\n",
-		addr, mvi->tx_dma, w_ptr);
-	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
-			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
-	/*Command List */
-	addr = mvi->slot_dma;
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Command List Base Address=0x%llX (PA)"
-		"(slot_dma=0x%llX), Header=%03d\n",
-		addr, slot->buf_dma, tag);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
-	/*mvs_cmd_hdr */
-	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
-		(u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
-	/*1.command table area */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Command Table :\n");
-	mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
-	/*2.open address frame area */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->Open Address Frame :\n");
-	mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
-				(u32) slot->buf_dma + slot->cmd_size);
-	/*3.status buffer */
-	mvs_hba_sb_dump(mvi, tag, proto);
-	/*4.PRD table */
-	dev_printk(KERN_DEBUG, &pdev->dev, "+---->PRD table :\n");
-	mvs_hexdump(sizeof(struct mvs_prd) * slot->n_elem,
-		(u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
-		(u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
-#endif
-}
-
-static void mvs_hba_cq_dump(struct mvs_info *mvi)
-{
-#if (_MV_DUMP > 2)
-	u64 addr;
-	void __iomem *regs = mvi->regs;
-	struct pci_dev *pdev = mvi->pdev;
-	u32 entry = mvi->rx_cons + 1;
-	u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
-
-	/*Completion Queue */
-	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
-	dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
-		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Completion List Base Address=0x%llX (PA), "
-		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
-		addr, entry - 1, mvi->rx[0]);
-	mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
-		    mvi->rx_dma + sizeof(u32) * entry);
-#endif
-}
-
-static void mvs_hba_interrupt_enable(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(GBL_CTL);
-
-	mw32(GBL_CTL, tmp | INT_EN);
-}
-
-static void mvs_hba_interrupt_disable(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(GBL_CTL);
-
-	mw32(GBL_CTL, tmp & ~INT_EN);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
-	int rc;
-
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_printk(KERN_ERR, &pdev->dev,
-					   "64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
-
-	return rc;
-}
-
-static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
-{
-	if (task->lldd_task) {
-		struct mvs_slot_info *slot;
-		slot = (struct mvs_slot_info *) task->lldd_task;
-		*tag = slot - mvi->slot_info;
-		return 1;
-	}
-	return 0;
-}
-
-static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
-{
-	void *bitmap = (void *) &mvi->tags;
-	clear_bit(tag, bitmap);
-}
-
-static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
-{
-	mvs_tag_clear(mvi, tag);
-}
-
-static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
-{
-	void *bitmap = (void *) &mvi->tags;
-	set_bit(tag, bitmap);
-}
-
-static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
-{
-	unsigned int index, tag;
-	void *bitmap = (void *) &mvi->tags;
-
-	index = find_first_zero_bit(bitmap, MVS_SLOTS);
-	tag = index;
-	if (tag >= MVS_SLOTS)
-		return -SAS_QUEUE_FULL;
-	mvs_tag_set(mvi, tag);
-	*tag_out = tag;
-	return 0;
-}
-
-static void mvs_tag_init(struct mvs_info *mvi)
-{
-	int i;
-	for (i = 0; i < MVS_SLOTS; ++i)
-		mvs_tag_clear(mvi, i);
-}
-
-#ifndef MVS_DISABLE_NVRAM
-static int mvs_eep_read(void __iomem *regs, u32 addr, u32 *data)
-{
-	int timeout = 1000;
-
-	if (addr & ~SPI_ADDR_MASK)
-		return -EINVAL;
-
-	writel(addr, regs + SPI_CMD);
-	writel(TWSI_RD, regs + SPI_CTL);
-
-	while (timeout-- > 0) {
-		if (readl(regs + SPI_CTL) & TWSI_RDY) {
-			*data = readl(regs + SPI_DATA);
-			return 0;
-		}
-
-		udelay(10);
-	}
-
-	return -EBUSY;
-}
-
-static int mvs_eep_read_buf(void __iomem *regs, u32 addr,
-			    void *buf, u32 buflen)
-{
-	u32 addr_end, tmp_addr, i, j;
-	u32 tmp = 0;
-	int rc;
-	u8 *tmp8, *buf8 = buf;
-
-	addr_end = addr + buflen;
-	tmp_addr = ALIGN(addr, 4);
-	if (addr > 0xff)
-		return -EINVAL;
-
-	j = addr & 0x3;
-	if (j) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		tmp8 = (u8 *)&tmp;
-		for (i = j; i < 4; i++)
-			*buf8++ = tmp8[i];
-
-		tmp_addr += 4;
-	}
-
-	for (j = ALIGN(addr_end, 4); tmp_addr < j; tmp_addr += 4) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		memcpy(buf8, &tmp, 4);
-		buf8 += 4;
-	}
-
-	if (tmp_addr < addr_end) {
-		rc = mvs_eep_read(regs, tmp_addr, &tmp);
-		if (rc)
-			return rc;
-
-		tmp8 = (u8 *)&tmp;
-		j = addr_end - tmp_addr;
-		for (i = 0; i < j; i++)
-			*buf8++ = tmp8[i];
-
-		tmp_addr += 4;
-	}
-
-	return 0;
-}
-#endif
-
-static int mvs_nvram_read(struct mvs_info *mvi, u32 addr,
-			  void *buf, u32 buflen)
-{
-#ifndef MVS_DISABLE_NVRAM
-	void __iomem *regs = mvi->regs;
-	int rc, i;
-	u32 sum;
-	u8 hdr[2], *tmp;
-	const char *msg;
-
-	rc = mvs_eep_read_buf(regs, addr, &hdr, 2);
-	if (rc) {
-		msg = "nvram hdr read failed";
-		goto err_out;
-	}
-	rc = mvs_eep_read_buf(regs, addr + 2, buf, buflen);
-	if (rc) {
-		msg = "nvram read failed";
-		goto err_out;
-	}
-
-	if (hdr[0] != 0x5A) {
-		/* entry id */
-		msg = "invalid nvram entry id";
-		rc = -ENOENT;
-		goto err_out;
-	}
-
-	tmp = buf;
-	sum = ((u32)hdr[0]) + ((u32)hdr[1]);
-	for (i = 0; i < buflen; i++)
-		sum += ((u32)tmp[i]);
-
-	if (sum) {
-		msg = "nvram checksum failure";
-		rc = -EILSEQ;
-		goto err_out;
-	}
-
-	return 0;
-
-err_out:
-	dev_printk(KERN_ERR, &mvi->pdev->dev, "%s", msg);
-	return rc;
-#else
-	/* FIXME , For SAS target mode */
-	memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
-	return 0;
-#endif
-}
-
-static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
-	if (!phy->phy_attached)
-		return;
-
-	if (sas_phy->phy) {
-		struct sas_phy *sphy = sas_phy->phy;
-
-		sphy->negotiated_linkrate = sas_phy->linkrate;
-		sphy->minimum_linkrate = phy->minimum_linkrate;
-		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-		sphy->maximum_linkrate = phy->maximum_linkrate;
-		sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
-	}
-
-	if (phy->phy_type & PORT_TYPE_SAS) {
-		struct sas_identify_frame *id;
-
-		id = (struct sas_identify_frame *)phy->frame_rcvd;
-		id->dev_type = phy->identify.device_type;
-		id->initiator_bits = SAS_PROTOCOL_ALL;
-		id->target_bits = phy->identify.target_port_protocols;
-	} else if (phy->phy_type & PORT_TYPE_SATA) {
-		/* TODO */
-	}
-	mvi->sas.sas_phy[i]->frame_rcvd_size = phy->frame_rcvd_size;
-	mvi->sas.notify_port_event(mvi->sas.sas_phy[i],
-				   PORTE_BYTES_DMAED);
-}
-
-static int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
-	/* give the phy enabling interrupt event time to come in (1s
-	 * is empirically about all it takes) */
-	if (time < HZ)
-		return 0;
-	/* Wait for discovery to finish */
-	scsi_flush_work(shost);
-	return 1;
-}
-
-static void mvs_scan_start(struct Scsi_Host *shost)
-{
-	int i;
-	struct mvs_info *mvi = SHOST_TO_SAS_HA(shost)->lldd_ha;
-
-	for (i = 0; i < mvi->chip->n_phy; ++i) {
-		mvs_bytes_dmaed(mvi, i);
-	}
-}
-
-static int mvs_slave_configure(struct scsi_device *sdev)
-{
-	struct domain_device *dev = sdev_to_domain_dev(sdev);
-	int ret = sas_slave_configure(sdev);
-
-	if (ret)
-		return ret;
-
-	if (dev_is_sata(dev)) {
-		/* struct ata_port *ap = dev->sata_dev.ap; */
-		/* struct ata_device *adev = ap->link.device; */
-
-		/* clamp at no NCQ for the time being */
-		/* adev->flags |= ATA_DFLAG_NCQ_OFF; */
-		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
-	}
-	return 0;
-}
-
-static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
-{
-	struct pci_dev *pdev = mvi->pdev;
-	struct sas_ha_struct *sas_ha = &mvi->sas;
-	struct mvs_phy *phy = &mvi->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
-	phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
-	/*
-	* events is port event now ,
-	* we need check the interrupt status which belongs to per port.
-	*/
-	dev_printk(KERN_DEBUG, &pdev->dev,
-		"Port %d Event = %X\n",
-		phy_no, phy->irq_status);
-
-	if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
-		mvs_release_task(mvi, phy_no);
-		if (!mvs_is_phy_ready(mvi, phy_no)) {
-			sas_phy_disconnected(sas_phy);
-			sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
-			dev_printk(KERN_INFO, &pdev->dev,
-				"Port %d Unplug Notice\n", phy_no);
-
-		} else
-			mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
-	}
-	if (!(phy->irq_status & PHYEV_DEC_ERR)) {
-		if (phy->irq_status & PHYEV_COMWAKE) {
-			u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
-			mvs_write_port_irq_mask(mvi, phy_no,
-						tmp | PHYEV_SIG_FIS);
-		}
-		if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
-			phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
-			if (phy->phy_status) {
-				mvs_detect_porttype(mvi, phy_no);
-
-				if (phy->phy_type & PORT_TYPE_SATA) {
-					u32 tmp = mvs_read_port_irq_mask(mvi,
-								phy_no);
-					tmp &= ~PHYEV_SIG_FIS;
-					mvs_write_port_irq_mask(mvi,
-								phy_no, tmp);
-				}
-
-				mvs_update_phyinfo(mvi, phy_no, 0);
-				sas_ha->notify_phy_event(sas_phy,
-							PHYE_OOB_DONE);
-				mvs_bytes_dmaed(mvi, phy_no);
-			} else {
-				dev_printk(KERN_DEBUG, &pdev->dev,
-					"plugin interrupt but phy is gone\n");
-				mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
-							NULL);
-			}
-		} else if (phy->irq_status & PHYEV_BROAD_CH) {
-			mvs_release_task(mvi, phy_no);
-			sas_ha->notify_port_event(sas_phy,
-						PORTE_BROADCAST_RCVD);
-		}
-	}
-	mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
-}
-
-static void mvs_int_sata(struct mvs_info *mvi)
-{
-	u32 tmp;
-	void __iomem *regs = mvi->regs;
-	tmp = mr32(INT_STAT_SRS);
-	mw32(INT_STAT_SRS, tmp & 0xFFFF);
-}
-
-static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
-				u32 slot_idx)
-{
-	void __iomem *regs = mvi->regs;
-	struct domain_device *dev = task->dev;
-	struct asd_sas_port *sas_port = dev->port;
-	struct mvs_port *port = mvi->slot_info[slot_idx].port;
-	u32 reg_set, phy_mask;
-
-	if (!sas_protocol_ata(task->task_proto)) {
-		reg_set = 0;
-		phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
-				sas_port->phy_mask;
-	} else {
-		reg_set = port->taskfileset;
-		phy_mask = sas_port->phy_mask;
-	}
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
-					(TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
-					(phy_mask << TXQ_PHY_SHIFT) |
-					(reg_set << TXQ_SRS_SHIFT));
-
-	mw32(TX_PROD_IDX, mvi->tx_prod);
-	mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-}
-
-static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
-			u32 slot_idx, int err)
-{
-	struct mvs_port *port = mvi->slot_info[slot_idx].port;
-	struct task_status_struct *tstat = &task->task_status;
-	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
-	int stat = SAM_GOOD;
-
-	resp->frame_len = sizeof(struct dev_to_host_fis);
-	memcpy(&resp->ending_fis[0],
-	       SATA_RECEIVED_D2H_FIS(port->taskfileset),
-	       sizeof(struct dev_to_host_fis));
-	tstat->buf_valid_size = sizeof(*resp);
-	if (unlikely(err))
-		stat = SAS_PROTO_RESPONSE;
-	return stat;
-}
-
-static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
-{
-	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
-	mvs_tag_clear(mvi, slot_idx);
-}
-
-static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
-			  struct mvs_slot_info *slot, u32 slot_idx)
-{
-	if (!sas_protocol_ata(task->task_proto))
-		if (slot->n_elem)
-			pci_unmap_sg(mvi->pdev, task->scatter,
-				     slot->n_elem, task->data_dir);
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SMP:
-		pci_unmap_sg(mvi->pdev, &task->smp_task.smp_resp, 1,
-			     PCI_DMA_FROMDEVICE);
-		pci_unmap_sg(mvi->pdev, &task->smp_task.smp_req, 1,
-			     PCI_DMA_TODEVICE);
-		break;
-
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SSP:
-	default:
-		/* do nothing */
-		break;
-	}
-	list_del(&slot->list);
-	task->lldd_task = NULL;
-	slot->task = NULL;
-	slot->port = NULL;
-}
-
-static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
-			 u32 slot_idx)
-{
-	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
-	u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
-	int stat = SAM_CHECK_COND;
-
-	if (err_dw1 & SLOT_BSY_ERR) {
-		stat = SAS_QUEUE_FULL;
-		mvs_slot_reset(mvi, task, slot_idx);
-	}
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SSP:
-		break;
-	case SAS_PROTOCOL_SMP:
-		break;
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-		if (err_dw0 & TFILE_ERR)
-			stat = mvs_sata_done(mvi, task, slot_idx, 1);
-		break;
-	default:
-		break;
-	}
-
-	mvs_hexdump(16, (u8 *) slot->response, 0);
-	return stat;
-}
-
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
-{
-	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
-	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
-	struct sas_task *task = slot->task;
-	struct task_status_struct *tstat;
-	struct mvs_port *port;
-	bool aborted;
-	void *to;
-
-	if (unlikely(!task || !task->lldd_task))
-		return -1;
-
-	mvs_hba_cq_dump(mvi);
-
-	spin_lock(&task->task_state_lock);
-	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
-	if (!aborted) {
-		task->task_state_flags &=
-		    ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
-		task->task_state_flags |= SAS_TASK_STATE_DONE;
-	}
-	spin_unlock(&task->task_state_lock);
-
-	if (aborted) {
-		mvs_slot_task_free(mvi, task, slot, slot_idx);
-		mvs_slot_free(mvi, rx_desc);
-		return -1;
-	}
-
-	port = slot->port;
-	tstat = &task->task_status;
-	memset(tstat, 0, sizeof(*tstat));
-	tstat->resp = SAS_TASK_COMPLETE;
-
-	if (unlikely(!port->port_attached || flags)) {
-		mvs_slot_err(mvi, task, slot_idx);
-		if (!sas_protocol_ata(task->task_proto))
-			tstat->stat = SAS_PHY_DOWN;
-		goto out;
-	}
-
-	/* error info record present */
-	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
-		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
-		goto out;
-	}
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SSP:
-		/* hw says status == 0, datapres == 0 */
-		if (rx_desc & RXQ_GOOD) {
-			tstat->stat = SAM_GOOD;
-			tstat->resp = SAS_TASK_COMPLETE;
-		}
-		/* response frame present */
-		else if (rx_desc & RXQ_RSP) {
-			struct ssp_response_iu *iu =
-			    slot->response + sizeof(struct mvs_err_info);
-			sas_ssp_task_response(&mvi->pdev->dev, task, iu);
-		}
-
-		/* should never happen? */
-		else
-			tstat->stat = SAM_CHECK_COND;
-		break;
-
-	case SAS_PROTOCOL_SMP: {
-			struct scatterlist *sg_resp = &task->smp_task.smp_resp;
-			tstat->stat = SAM_GOOD;
-			to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
-			memcpy(to + sg_resp->offset,
-				slot->response + sizeof(struct mvs_err_info),
-				sg_dma_len(sg_resp));
-			kunmap_atomic(to, KM_IRQ0);
-			break;
-		}
-
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
-			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
-			break;
-		}
-
-	default:
-		tstat->stat = SAM_CHECK_COND;
-		break;
-	}
-
-out:
-	mvs_slot_task_free(mvi, task, slot, slot_idx);
-	if (unlikely(tstat->stat != SAS_QUEUE_FULL))
-		mvs_slot_free(mvi, rx_desc);
-
-	spin_unlock(&mvi->lock);
-	task->task_done(task);
-	spin_lock(&mvi->lock);
-	return tstat->stat;
-}
-
-static void mvs_release_task(struct mvs_info *mvi, int phy_no)
-{
-	struct list_head *pos, *n;
-	struct mvs_slot_info *slot;
-	struct mvs_phy *phy = &mvi->phy[phy_no];
-	struct mvs_port *port = phy->port;
-	u32 rx_desc;
-
-	if (!port)
-		return;
-
-	list_for_each_safe(pos, n, &port->list) {
-		slot = container_of(pos, struct mvs_slot_info, list);
-		rx_desc = (u32) (slot - mvi->slot_info);
-		mvs_slot_complete(mvi, rx_desc, 1);
-	}
-}
-
-static void mvs_int_full(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp, stat;
-	int i;
-
-	stat = mr32(INT_STAT);
-
-	mvs_int_rx(mvi, false);
-
-	for (i = 0; i < MVS_MAX_PORTS; i++) {
-		tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
-		if (tmp)
-			mvs_int_port(mvi, i, tmp);
-	}
-
-	if (stat & CINT_SRS)
-		mvs_int_sata(mvi);
-
-	mw32(INT_STAT, stat);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
-{
-	void __iomem *regs = mvi->regs;
-	u32 rx_prod_idx, rx_desc;
-	bool attn = false;
-	struct pci_dev *pdev = mvi->pdev;
-
-	/* the first dword in the RX ring is special: it contains
-	 * a mirror of the hardware's RX producer index, so that
-	 * we don't have to stall the CPU reading that register.
-	 * The actual RX ring is offset by one dword, due to this.
-	 */
-	rx_prod_idx = mvi->rx_cons;
-	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
-	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
-		return 0;
-
-	/* The CMPL_Q may come late, read from register and try again
-	* note: if coalescing is enabled,
-	* it will need to read from register every time for sure
-	*/
-	if (mvi->rx_cons == rx_prod_idx)
-		mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
-
-	if (mvi->rx_cons == rx_prod_idx)
-		return 0;
-
-	while (mvi->rx_cons != rx_prod_idx) {
-
-		/* increment our internal RX consumer pointer */
-		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
-
-		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
-
-		if (likely(rx_desc & RXQ_DONE))
-			mvs_slot_complete(mvi, rx_desc, 0);
-		if (rx_desc & RXQ_ATTN) {
-			attn = true;
-			dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
-				rx_desc);
-		} else if (rx_desc & RXQ_ERR) {
-			if (!(rx_desc & RXQ_DONE))
-				mvs_slot_complete(mvi, rx_desc, 0);
-			dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
-				rx_desc);
-		} else if (rx_desc & RXQ_SLOT_RESET) {
-			dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
-				rx_desc);
-			mvs_slot_free(mvi, rx_desc);
-		}
-	}
-
-	if (attn && self_clear)
-		mvs_int_full(mvi);
-
-	return 0;
-}
-
-#ifdef MVS_USE_TASKLET
-static void mvs_tasklet(unsigned long data)
-{
-	struct mvs_info *mvi = (struct mvs_info *) data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-
-#ifdef MVS_DISABLE_MSI
-	mvs_int_full(mvi);
-#else
-	mvs_int_rx(mvi, true);
-#endif
-	spin_unlock_irqrestore(&mvi->lock, flags);
-}
-#endif
-
-static irqreturn_t mvs_interrupt(int irq, void *opaque)
-{
-	struct mvs_info *mvi = opaque;
-	void __iomem *regs = mvi->regs;
-	u32 stat;
-
-	stat = mr32(GBL_INT_STAT);
-
-	if (stat == 0 || stat == 0xffffffff)
-		return IRQ_NONE;
-
-	/* clear CMD_CMPLT ASAP */
-	mw32_f(INT_STAT, CINT_DONE);
-
-#ifndef MVS_USE_TASKLET
-	spin_lock(&mvi->lock);
-
-	mvs_int_full(mvi);
-
-	spin_unlock(&mvi->lock);
-#else
-	tasklet_schedule(&mvi->tasklet);
-#endif
-	return IRQ_HANDLED;
-}
-
-#ifndef MVS_DISABLE_MSI
-static irqreturn_t mvs_msi_interrupt(int irq, void *opaque)
-{
-	struct mvs_info *mvi = opaque;
-
-#ifndef MVS_USE_TASKLET
-	spin_lock(&mvi->lock);
-
-	mvs_int_rx(mvi, true);
-
-	spin_unlock(&mvi->lock);
-#else
-	tasklet_schedule(&mvi->tasklet);
-#endif
-	return IRQ_HANDLED;
-}
-#endif
-
-struct mvs_task_exec_info {
-	struct sas_task *task;
-	struct mvs_cmd_hdr *hdr;
-	struct mvs_port *port;
-	u32 tag;
-	int n_elem;
-};
-
-static int mvs_task_prep_smp(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	int elem, rc, i;
-	struct sas_task *task = tei->task;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct scatterlist *sg_req, *sg_resp;
-	u32 req_len, resp_len, tag = tei->tag;
-	void *buf_tmp;
-	u8 *buf_oaf;
-	dma_addr_t buf_tmp_dma;
-	struct mvs_prd *buf_prd;
-	struct scatterlist *sg;
-	struct mvs_slot_info *slot = &mvi->slot_info[tag];
-	struct asd_sas_port *sas_port = task->dev->port;
-	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-#if _MV_DUMP
-	u8 *buf_cmd;
-	void *from;
-#endif
-	/*
-	 * DMA-map SMP request, response buffers
-	 */
-	sg_req = &task->smp_task.smp_req;
-	elem = pci_map_sg(mvi->pdev, sg_req, 1, PCI_DMA_TODEVICE);
-	if (!elem)
-		return -ENOMEM;
-	req_len = sg_dma_len(sg_req);
-
-	sg_resp = &task->smp_task.smp_resp;
-	elem = pci_map_sg(mvi->pdev, sg_resp, 1, PCI_DMA_FROMDEVICE);
-	if (!elem) {
-		rc = -ENOMEM;
-		goto err_out;
-	}
-	resp_len = sg_dma_len(sg_resp);
-
-	/* must be in dwords */
-	if ((req_len & 0x3) || (resp_len & 0x3)) {
-		rc = -EINVAL;
-		goto err_out_2;
-	}
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
-	buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-#if _MV_DUMP
-	buf_cmd = buf_tmp;
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-	buf_tmp += req_len;
-	buf_tmp_dma += req_len;
-	slot->cmd_size = req_len;
-#else
-	hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	/*
-	 * Fill in TX ring and command slot header
-	 */
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
-					TXQ_MODE_I | tag |
-					(sas_port->phy_mask << TXQ_PHY_SHIFT));
-
-	hdr->flags |= flags;
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
-	hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = 0;
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (0 << 4) | 0x01; /* initiator, SMP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = 0xFFFF;		/* SAS SPEC */
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-#if _MV_DUMP
-	/* copy cmd table */
-	from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
-	memcpy(buf_cmd, from + sg_req->offset, req_len);
-	kunmap_atomic(from, KM_IRQ0);
-#endif
-	return 0;
-
-err_out_2:
-	pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_resp, 1,
-		     PCI_DMA_FROMDEVICE);
-err_out:
-	pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_req, 1,
-		     PCI_DMA_TODEVICE);
-	return rc;
-}
-
-static void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp, offs;
-	u8 *tfs = &port->taskfileset;
-
-	if (*tfs == MVS_ID_NOT_MAPPED)
-		return;
-
-	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
-	if (*tfs < 16) {
-		tmp = mr32(PCS);
-		mw32(PCS, tmp & ~offs);
-	} else {
-		tmp = mr32(CTL);
-		mw32(CTL, tmp & ~offs);
-	}
-
-	tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
-	if (tmp)
-		mw32(INT_STAT_SRS, tmp);
-
-	*tfs = MVS_ID_NOT_MAPPED;
-}
-
-static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
-	int i;
-	u32 tmp, offs;
-	void __iomem *regs = mvi->regs;
-
-	if (port->taskfileset != MVS_ID_NOT_MAPPED)
-		return 0;
-
-	tmp = mr32(PCS);
-
-	for (i = 0; i < mvi->chip->srs_sz; i++) {
-		if (i == 16)
-			tmp = mr32(CTL);
-		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
-		if (!(tmp & offs)) {
-			port->taskfileset = i;
-
-			if (i < 16)
-				mw32(PCS, tmp | offs);
-			else
-				mw32(CTL, tmp | offs);
-			tmp = mr32(INT_STAT_SRS) & (1U << i);
-			if (tmp)
-				mw32(INT_STAT_SRS, tmp);
-			return 0;
-		}
-	}
-	return MVS_ID_NOT_MAPPED;
-}
-
-static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
-{
-	struct ata_queued_cmd *qc = task->uldd_task;
-
-	if (qc) {
-		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
-			qc->tf.command == ATA_CMD_FPDMA_READ) {
-			*tag = qc->tag;
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static int mvs_task_prep_ata(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	struct sas_task *task = tei->task;
-	struct domain_device *dev = task->dev;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct asd_sas_port *sas_port = dev->port;
-	struct mvs_slot_info *slot;
-	struct scatterlist *sg;
-	struct mvs_prd *buf_prd;
-	struct mvs_port *port = tei->port;
-	u32 tag = tei->tag;
-	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-	void *buf_tmp;
-	u8 *buf_cmd, *buf_oaf;
-	dma_addr_t buf_tmp_dma;
-	u32 i, req_len, resp_len;
-	const u32 max_resp_len = SB_RFB_MAX;
-
-	if (mvs_assign_reg_set(mvi, port) == MVS_ID_NOT_MAPPED)
-		return -EBUSY;
-
-	slot = &mvi->slot_info[tag];
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
-					(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
-					(sas_port->phy_mask << TXQ_PHY_SHIFT) |
-					(port->taskfileset << TXQ_SRS_SHIFT));
-
-	if (task->ata_task.use_ncq)
-		flags |= MCH_FPDMA;
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
-		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
-			flags |= MCH_ATAPI;
-	}
-
-	/* FIXME: fill in port multiplier number */
-
-	hdr->flags = cpu_to_le32(flags);
-
-	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
-	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
-		task->ata_task.fis.sector_count |= hdr->tags << 3;
-	else
-		hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
-	buf_cmd = buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_ATA_CMD_SZ;
-	buf_tmp_dma += MVS_ATA_CMD_SZ;
-#if _MV_DUMP
-	slot->cmd_size = MVS_ATA_CMD_SZ;
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	/* used for STP.  unused for SATA? */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	/* FIXME: probably unused, for SATA.  kept here just in case
-	 * we get a STP/SATA error information record
-	 */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	req_len = sizeof(struct host_to_dev_fis);
-	resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
-	    sizeof(struct mvs_err_info) - i;
-
-	/* request, response lengths */
-	resp_len = min(resp_len, max_resp_len);
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
-	task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
-	/* fill in command FIS and ATAPI CDB */
-	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
-	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
-		memcpy(buf_cmd + STP_ATAPI_CMD,
-			task->ata_task.atapi_packet, 16);
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (2 << 4) | 0x1;	/* initiator, STP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-	return 0;
-}
-
-static int mvs_task_prep_ssp(struct mvs_info *mvi,
-			     struct mvs_task_exec_info *tei)
-{
-	struct sas_task *task = tei->task;
-	struct mvs_cmd_hdr *hdr = tei->hdr;
-	struct mvs_port *port = tei->port;
-	struct mvs_slot_info *slot;
-	struct scatterlist *sg;
-	struct mvs_prd *buf_prd;
-	struct ssp_frame_hdr *ssp_hdr;
-	void *buf_tmp;
-	u8 *buf_cmd, *buf_oaf, fburst = 0;
-	dma_addr_t buf_tmp_dma;
-	u32 flags;
-	u32 resp_len, req_len, i, tag = tei->tag;
-	const u32 max_resp_len = SB_RFB_MAX;
-	u8 phy_mask;
-
-	slot = &mvi->slot_info[tag];
-
-	phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
-		task->dev->port->phy_mask;
-	slot->tx = mvi->tx_prod;
-	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
-				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
-				(phy_mask << TXQ_PHY_SHIFT));
-
-	flags = MCH_RETRY;
-	if (task->ssp_task.enable_first_burst) {
-		flags |= MCH_FBURST;
-		fburst = (1 << 7);
-	}
-	hdr->flags = cpu_to_le32(flags |
-				 (tei->n_elem << MCH_PRD_LEN_SHIFT) |
-				 (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT));
-
-	hdr->tags = cpu_to_le32(tag);
-	hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
-	/*
-	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
-	 */
-
-	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
-	buf_cmd = buf_tmp = slot->buf;
-	buf_tmp_dma = slot->buf_dma;
-
-	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_SSP_CMD_SZ;
-	buf_tmp_dma += MVS_SSP_CMD_SZ;
-#if _MV_DUMP
-	slot->cmd_size = MVS_SSP_CMD_SZ;
-#endif
-
-	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
-	buf_oaf = buf_tmp;
-	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
-	buf_tmp += MVS_OAF_SZ;
-	buf_tmp_dma += MVS_OAF_SZ;
-
-	/* region 3: PRD table ********************************************* */
-	buf_prd = buf_tmp;
-	if (tei->n_elem)
-		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
-	else
-		hdr->prd_tbl = 0;
-
-	i = sizeof(struct mvs_prd) * tei->n_elem;
-	buf_tmp += i;
-	buf_tmp_dma += i;
-
-	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
-	slot->response = buf_tmp;
-	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
-	resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
-	    sizeof(struct mvs_err_info) - i;
-	resp_len = min(resp_len, max_resp_len);
-
-	req_len = sizeof(struct ssp_frame_hdr) + 28;
-
-	/* request, response lengths */
-	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
-	/* generate open address frame hdr (first 12 bytes) */
-	buf_oaf[0] = (1 << 7) | (1 << 4) | 0x1;	/* initiator, SSP, ftype 1h */
-	buf_oaf[1] = task->dev->linkrate & 0xf;
-	*(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
-	memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
-	/* fill in SSP frame header (Command Table.SSP frame header) */
-	ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
-	ssp_hdr->frame_type = SSP_COMMAND;
-	memcpy(ssp_hdr->hashed_dest_addr, task->dev->hashed_sas_addr,
-	       HASHED_SAS_ADDR_SIZE);
-	memcpy(ssp_hdr->hashed_src_addr,
-	       task->dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
-	ssp_hdr->tag = cpu_to_be16(tag);
-
-	/* fill in command frame IU */
-	buf_cmd += sizeof(*ssp_hdr);
-	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	buf_cmd[9] = fburst | task->ssp_task.task_attr |
-			(task->ssp_task.task_prio << 3);
-	memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
-
-	/* fill in PRD (scatter/gather) table, if any */
-	for_each_sg(task->scatter, sg, tei->n_elem, i) {
-		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
-		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
-		buf_prd++;
-	}
-
-	return 0;
-}
-
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
-{
-	struct domain_device *dev = task->dev;
-	struct mvs_info *mvi = dev->port->ha->lldd_ha;
-	struct pci_dev *pdev = mvi->pdev;
-	void __iomem *regs = mvi->regs;
-	struct mvs_task_exec_info tei;
-	struct sas_task *t = task;
-	struct mvs_slot_info *slot;
-	u32 tag = 0xdeadbeef, rc, n_elem = 0;
-	unsigned long flags;
-	u32 n = num, pass = 0;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-	do {
-		dev = t->dev;
-		tei.port = &mvi->port[dev->port->id];
-
-		if (!tei.port->port_attached) {
-			if (sas_protocol_ata(t->task_proto)) {
-				rc = SAS_PHY_DOWN;
-				goto out_done;
-			} else {
-				struct task_status_struct *ts = &t->task_status;
-				ts->resp = SAS_TASK_UNDELIVERED;
-				ts->stat = SAS_PHY_DOWN;
-				t->task_done(t);
-				if (n > 1)
-					t = list_entry(t->list.next,
-							struct sas_task, list);
-				continue;
-			}
-		}
-
-		if (!sas_protocol_ata(t->task_proto)) {
-			if (t->num_scatter) {
-				n_elem = pci_map_sg(mvi->pdev, t->scatter,
-						    t->num_scatter,
-						    t->data_dir);
-				if (!n_elem) {
-					rc = -ENOMEM;
-					goto err_out;
-				}
-			}
-		} else {
-			n_elem = t->num_scatter;
-		}
-
-		rc = mvs_tag_alloc(mvi, &tag);
-		if (rc)
-			goto err_out;
-
-		slot = &mvi->slot_info[tag];
-		t->lldd_task = NULL;
-		slot->n_elem = n_elem;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-		tei.task = t;
-		tei.hdr = &mvi->slot[tag];
-		tei.tag = tag;
-		tei.n_elem = n_elem;
-
-		switch (t->task_proto) {
-		case SAS_PROTOCOL_SMP:
-			rc = mvs_task_prep_smp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SSP:
-			rc = mvs_task_prep_ssp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SATA:
-		case SAS_PROTOCOL_STP:
-		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-			rc = mvs_task_prep_ata(mvi, &tei);
-			break;
-		default:
-			dev_printk(KERN_ERR, &pdev->dev,
-				"unknown sas_task proto: 0x%x\n",
-				t->task_proto);
-			rc = -EINVAL;
-			break;
-		}
-
-		if (rc)
-			goto err_out_tag;
-
-		slot->task = t;
-		slot->port = tei.port;
-		t->lldd_task = (void *) slot;
-		list_add_tail(&slot->list, &slot->port->list);
-		/* TODO: select normal or high priority */
-
-		spin_lock(&t->task_state_lock);
-		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
-		spin_unlock(&t->task_state_lock);
-
-		mvs_hba_memory_dump(mvi, tag, t->task_proto);
-
-		++pass;
-		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-		if (n > 1)
-			t = list_entry(t->list.next, struct sas_task, list);
-	} while (--n);
-
-	rc = 0;
-	goto out_done;
-
-err_out_tag:
-	mvs_tag_free(mvi, tag);
-err_out:
-	dev_printk(KERN_ERR, &pdev->dev, "mvsas exec failed[%d]!\n", rc);
-	if (!sas_protocol_ata(t->task_proto))
-		if (n_elem)
-			pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
-				     t->data_dir);
-out_done:
-	if (pass)
-		mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-	spin_unlock_irqrestore(&mvi->lock, flags);
-	return rc;
-}
-
-static int mvs_task_abort(struct sas_task *task)
-{
-	int rc;
-	unsigned long flags;
-	struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
-	struct pci_dev *pdev = mvi->pdev;
-	int tag;
-
-	spin_lock_irqsave(&task->task_state_lock, flags);
-	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
-		rc = TMF_RESP_FUNC_COMPLETE;
-		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		goto out_done;
-	}
-	spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-	switch (task->task_proto) {
-	case SAS_PROTOCOL_SMP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
-		break;
-	case SAS_PROTOCOL_SSP:
-		dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
-		break;
-	case SAS_PROTOCOL_SATA:
-	case SAS_PROTOCOL_STP:
-	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
-		dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
-#if _MV_DUMP
-		dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
-		mvs_hexdump(sizeof(struct host_to_dev_fis),
-				(void *)&task->ata_task.fis, 0);
-		dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
-		mvs_hexdump(16, task->ata_task.atapi_packet, 0);
-#endif
-		spin_lock_irqsave(&task->task_state_lock, flags);
-		if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
-			/* TODO */
-			;
-		}
-		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		break;
-	}
-	default:
-		break;
-	}
-
-	if (mvs_find_tag(mvi, task, &tag)) {
-		spin_lock_irqsave(&mvi->lock, flags);
-		mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
-		spin_unlock_irqrestore(&mvi->lock, flags);
-	}
-	if (!mvs_task_exec(task, 1, GFP_ATOMIC))
-		rc = TMF_RESP_FUNC_COMPLETE;
-	else
-		rc = TMF_RESP_FUNC_FAILED;
-out_done:
-	return rc;
-}
-
-static void mvs_free(struct mvs_info *mvi)
-{
-	int i;
-
-	if (!mvi)
-		return;
-
-	for (i = 0; i < MVS_SLOTS; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		if (slot->buf)
-			dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
-					  slot->buf, slot->buf_dma);
-	}
-
-	if (mvi->tx)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
-				  mvi->tx, mvi->tx_dma);
-	if (mvi->rx_fis)
-		dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
-				  mvi->rx_fis, mvi->rx_fis_dma);
-	if (mvi->rx)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
-				  mvi->rx, mvi->rx_dma);
-	if (mvi->slot)
-		dma_free_coherent(&mvi->pdev->dev,
-				  sizeof(*mvi->slot) * MVS_SLOTS,
-				  mvi->slot, mvi->slot_dma);
-#ifdef MVS_ENABLE_PERI
-	if (mvi->peri_regs)
-		iounmap(mvi->peri_regs);
-#endif
-	if (mvi->regs)
-		iounmap(mvi->regs);
-	if (mvi->shost)
-		scsi_host_put(mvi->shost);
-	kfree(mvi->sas.sas_port);
-	kfree(mvi->sas.sas_phy);
-	kfree(mvi);
-}
-
-/* FIXME: locking? */
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
-			   void *funcdata)
-{
-	struct mvs_info *mvi = sas_phy->ha->lldd_ha;
-	int rc = 0, phy_id = sas_phy->id;
-	u32 tmp;
-
-	tmp = mvs_read_phy_ctl(mvi, phy_id);
-
-	switch (func) {
-	case PHY_FUNC_SET_LINK_RATE:{
-			struct sas_phy_linkrates *rates = funcdata;
-			u32 lrmin = 0, lrmax = 0;
-
-			lrmin = (rates->minimum_linkrate << 8);
-			lrmax = (rates->maximum_linkrate << 12);
-
-			if (lrmin) {
-				tmp &= ~(0xf << 8);
-				tmp |= lrmin;
-			}
-			if (lrmax) {
-				tmp &= ~(0xf << 12);
-				tmp |= lrmax;
-			}
-			mvs_write_phy_ctl(mvi, phy_id, tmp);
-			break;
-		}
-
-	case PHY_FUNC_HARD_RESET:
-		if (tmp & PHY_RST_HARD)
-			break;
-		mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST_HARD);
-		break;
-
-	case PHY_FUNC_LINK_RESET:
-		mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST);
-		break;
-
-	case PHY_FUNC_DISABLE:
-	case PHY_FUNC_RELEASE_SPINUP_HOLD:
-	default:
-		rc = -EOPNOTSUPP;
-	}
-
-	return rc;
-}
-
-static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
-{
-	struct mvs_phy *phy = &mvi->phy[phy_id];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
-	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
-	sas_phy->class = SAS;
-	sas_phy->iproto = SAS_PROTOCOL_ALL;
-	sas_phy->tproto = 0;
-	sas_phy->type = PHY_TYPE_PHYSICAL;
-	sas_phy->role = PHY_ROLE_INITIATOR;
-	sas_phy->oob_mode = OOB_NOT_CONNECTED;
-	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
-
-	sas_phy->id = phy_id;
-	sas_phy->sas_addr = &mvi->sas_addr[0];
-	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
-	sas_phy->ha = &mvi->sas;
-	sas_phy->lldd_phy = phy;
-}
-
-static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
-					    const struct pci_device_id *ent)
-{
-	struct mvs_info *mvi;
-	unsigned long res_start, res_len, res_flag;
-	struct asd_sas_phy **arr_phy;
-	struct asd_sas_port **arr_port;
-	const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
-	int i;
-
-	/*
-	 * alloc and init our per-HBA mvs_info struct
-	 */
-
-	mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
-	if (!mvi)
-		return NULL;
-
-	spin_lock_init(&mvi->lock);
-#ifdef MVS_USE_TASKLET
-	tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
-#endif
-	mvi->pdev = pdev;
-	mvi->chip = chip;
-
-	if (pdev->device == 0x6440 && pdev->revision == 0)
-		mvi->flags |= MVF_PHY_PWR_FIX;
-
-	/*
-	 * alloc and init SCSI, SAS glue
-	 */
-
-	mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
-	if (!mvi->shost)
-		goto err_out;
-
-	arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
-	arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
-	if (!arr_phy || !arr_port)
-		goto err_out;
-
-	for (i = 0; i < MVS_MAX_PHYS; i++) {
-		mvs_phy_init(mvi, i);
-		arr_phy[i] = &mvi->phy[i].sas_phy;
-		arr_port[i] = &mvi->port[i].sas_port;
-		mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
-		mvi->port[i].wide_port_phymap = 0;
-		mvi->port[i].port_attached = 0;
-		INIT_LIST_HEAD(&mvi->port[i].list);
-	}
-
-	SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
-	mvi->shost->transportt = mvs_stt;
-	mvi->shost->max_id = 21;
-	mvi->shost->max_lun = ~0;
-	mvi->shost->max_channel = 0;
-	mvi->shost->max_cmd_len = 16;
-
-	mvi->sas.sas_ha_name = DRV_NAME;
-	mvi->sas.dev = &pdev->dev;
-	mvi->sas.lldd_module = THIS_MODULE;
-	mvi->sas.sas_addr = &mvi->sas_addr[0];
-	mvi->sas.sas_phy = arr_phy;
-	mvi->sas.sas_port = arr_port;
-	mvi->sas.num_phys = chip->n_phy;
-	mvi->sas.lldd_max_execute_num = 1;
-	mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
-	mvi->shost->can_queue = MVS_CAN_QUEUE;
-	mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
-	mvi->sas.lldd_ha = mvi;
-	mvi->sas.core.shost = mvi->shost;
-
-	mvs_tag_init(mvi);
-
-	/*
-	 * ioremap main and peripheral registers
-	 */
-
-#ifdef MVS_ENABLE_PERI
-	res_start = pci_resource_start(pdev, 2);
-	res_len = pci_resource_len(pdev, 2);
-	if (!res_start || !res_len)
-		goto err_out;
-
-	mvi->peri_regs = ioremap_nocache(res_start, res_len);
-	if (!mvi->peri_regs)
-		goto err_out;
-#endif
-
-	res_start = pci_resource_start(pdev, 4);
-	res_len = pci_resource_len(pdev, 4);
-	if (!res_start || !res_len)
-		goto err_out;
-
-	res_flag = pci_resource_flags(pdev, 4);
-	if (res_flag & IORESOURCE_CACHEABLE)
-		mvi->regs = ioremap(res_start, res_len);
-	else
-		mvi->regs = ioremap_nocache(res_start, res_len);
-
-	if (!mvi->regs)
-		goto err_out;
-
-	/*
-	 * alloc and init our DMA areas
-	 */
-
-	mvi->tx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
-				     &mvi->tx_dma, GFP_KERNEL);
-	if (!mvi->tx)
-		goto err_out;
-	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
-
-	mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
-					 &mvi->rx_fis_dma, GFP_KERNEL);
-	if (!mvi->rx_fis)
-		goto err_out;
-	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
-
-	mvi->rx = dma_alloc_coherent(&pdev->dev,
-				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
-				     &mvi->rx_dma, GFP_KERNEL);
-	if (!mvi->rx)
-		goto err_out;
-	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
-
-	mvi->rx[0] = cpu_to_le32(0xfff);
-	mvi->rx_cons = 0xfff;
-
-	mvi->slot = dma_alloc_coherent(&pdev->dev,
-				       sizeof(*mvi->slot) * MVS_SLOTS,
-				       &mvi->slot_dma, GFP_KERNEL);
-	if (!mvi->slot)
-		goto err_out;
-	memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
-
-	for (i = 0; i < MVS_SLOTS; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
-					       &slot->buf_dma, GFP_KERNEL);
-		if (!slot->buf)
-			goto err_out;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-	}
-
-	/* finally, read NVRAM to get our SAS address */
-	if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
-		goto err_out;
-	return mvi;
-
-err_out:
-	mvs_free(mvi);
-	return NULL;
-}
-
-static u32 mvs_cr32(void __iomem *regs, u32 addr)
-{
-	mw32(CMD_ADDR, addr);
-	return mr32(CMD_DATA);
-}
-
-static void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
-{
-	mw32(CMD_ADDR, addr);
-	mw32(CMD_DATA, val);
-}
-
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
-{
-	void __iomem *regs = mvi->regs;
-	return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
-		mr32(P4_SER_CTLSTAT + (port - 4) * 4);
-}
-
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
-{
-	void __iomem *regs = mvi->regs;
-	if (port < 4)
-		mw32(P0_SER_CTLSTAT + port * 4, val);
-	else
-		mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
-}
-
-static u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
-{
-	void __iomem *regs = mvi->regs + off;
-	void __iomem *regs2 = mvi->regs + off2;
-	return (port < 4)?readl(regs + port * 8):
-		readl(regs2 + (port - 4) * 8);
-}
-
-static void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
-				u32 port, u32 val)
-{
-	void __iomem *regs = mvi->regs + off;
-	void __iomem *regs2 = mvi->regs + off2;
-	if (port < 4)
-		writel(val, regs + port * 8);
-	else
-		writel(val, regs2 + (port - 4) * 8);
-}
-
-static u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port);
-}
-
-static void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port, val);
-}
-
-static void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
-	mvs_write_port(mvi, MVS_P0_CFG_ADDR, MVS_P4_CFG_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port);
-}
-
-static void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port, val);
-}
-
-static void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
-	mvs_write_port(mvi, MVS_P0_VSR_ADDR, MVS_P4_VSR_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port);
-}
-
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port, val);
-}
-
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
-{
-	return mvs_read_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port);
-}
-
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
-{
-	mvs_write_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port, val);
-}
-
-static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	/* workaround for SATA R-ERR, to ignore phy glitch */
-	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
-	tmp &= ~(1 << 9);
-	tmp |= (1 << 10);
-	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
-	/* enable retry 127 times */
-	mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
-
-	/* extend open frame timeout to max */
-	tmp = mvs_cr32(regs, CMD_SAS_CTL0);
-	tmp &= ~0xffff;
-	tmp |= 0x3fff;
-	mvs_cw32(regs, CMD_SAS_CTL0, tmp);
-
-	/* workaround for WDTIMEOUT , set to 550 ms */
-	mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
-
-	/* not to halt for different port op during wideport link change */
-	mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
-
-	/* workaround for Seagate disk not-found OOB sequence, recv
-	 * COMINIT before sending out COMWAKE */
-	tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
-	tmp &= 0x0000ffff;
-	tmp |= 0x00fa0000;
-	mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
-
-	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
-	tmp &= 0x1fffffff;
-	tmp |= (2U << 29);	/* 8 ms retry */
-	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
-	/* TEST - for phy decoding error, adjust voltage levels */
-	mw32(P0_VSR_ADDR + 0, 0x8);
-	mw32(P0_VSR_DATA + 0, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 8, 0x8);
-	mw32(P0_VSR_DATA + 8, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 16, 0x8);
-	mw32(P0_VSR_DATA + 16, 0x2F0);
-
-	mw32(P0_VSR_ADDR + 24, 0x8);
-	mw32(P0_VSR_DATA + 24, 0x2F0);
-
-}
-
-static void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
-{
-	void __iomem *regs = mvi->regs;
-	u32 tmp;
-
-	tmp = mr32(PCS);
-	if (mvi->chip->n_phy <= 4)
-		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
-	else
-		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
-	mw32(PCS, tmp);
-}
-
-static void mvs_detect_porttype(struct mvs_info *mvi, int i)
-{
-	void __iomem *regs = mvi->regs;
-	u32 reg;
-	struct mvs_phy *phy = &mvi->phy[i];
-
-	/* TODO check & save device type */
-	reg = mr32(GBL_PORT_TYPE);
-
-	if (reg & MODE_SAS_SATA & (1 << i))
-		phy->phy_type |= PORT_TYPE_SAS;
-	else
-		phy->phy_type |= PORT_TYPE_SATA;
-}
-
-static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
-{
-	u32 *s = (u32 *) buf;
-
-	if (!s)
-		return NULL;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
-	s[3] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
-	s[2] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
-	s[1] = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
-	s[0] = mvs_read_port_cfg_data(mvi, i);
-
-	return (void *)s;
-}
-
-static u32 mvs_is_sig_fis_received(u32 irq_status)
-{
-	return irq_status & PHYEV_SIG_FIS;
-}
-
-static void mvs_update_wideport(struct mvs_info *mvi, int i)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port = phy->port;
-	int j, no;
-
-	for_each_phy(port->wide_port_phymap, no, j, mvi->chip->n_phy)
-		if (no & 1) {
-			mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
-			mvs_write_port_cfg_data(mvi, no,
-						port->wide_port_phymap);
-		} else {
-			mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
-			mvs_write_port_cfg_data(mvi, no, 0);
-		}
-}
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
-{
-	u32 tmp;
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct mvs_port *port = phy->port;;
-
-	tmp = mvs_read_phy_ctl(mvi, i);
-
-	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
-		if (!port)
-			phy->phy_attached = 1;
-		return tmp;
-	}
-
-	if (port) {
-		if (phy->phy_type & PORT_TYPE_SAS) {
-			port->wide_port_phymap &= ~(1U << i);
-			if (!port->wide_port_phymap)
-				port->port_attached = 0;
-			mvs_update_wideport(mvi, i);
-		} else if (phy->phy_type & PORT_TYPE_SATA)
-			port->port_attached = 0;
-		mvs_free_reg_set(mvi, phy->port);
-		phy->port = NULL;
-		phy->phy_attached = 0;
-		phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
-	}
-	return 0;
-}
-
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
-					int get_st)
-{
-	struct mvs_phy *phy = &mvi->phy[i];
-	struct pci_dev *pdev = mvi->pdev;
-	u32 tmp;
-	u64 tmp64;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
-	phy->dev_info = mvs_read_port_cfg_data(mvi, i);
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
-	phy->dev_sas_addr = (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
-	mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
-	phy->dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
-	if (get_st) {
-		phy->irq_status = mvs_read_port_irq_stat(mvi, i);
-		phy->phy_status = mvs_is_phy_ready(mvi, i);
-	}
-
-	if (phy->phy_status) {
-		u32 phy_st;
-		struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
-		mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
-		phy_st = mvs_read_port_cfg_data(mvi, i);
-
-		sas_phy->linkrate =
-			(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
-				PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-		phy->minimum_linkrate =
-			(phy->phy_status &
-				PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
-		phy->maximum_linkrate =
-			(phy->phy_status &
-				PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
-
-		if (phy->phy_type & PORT_TYPE_SAS) {
-			/* Updated attached_sas_addr */
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
-			phy->att_dev_sas_addr =
-				(u64) mvs_read_port_cfg_data(mvi, i) << 32;
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
-			phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-			mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
-			phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
-			phy->identify.device_type =
-			    phy->att_dev_info & PORT_DEV_TYPE_MASK;
-
-			if (phy->identify.device_type == SAS_END_DEV)
-				phy->identify.target_port_protocols =
-							SAS_PROTOCOL_SSP;
-			else if (phy->identify.device_type != NO_DEVICE)
-				phy->identify.target_port_protocols =
-							SAS_PROTOCOL_SMP;
-			if (phy_st & PHY_OOB_DTCTD)
-				sas_phy->oob_mode = SAS_OOB_MODE;
-			phy->frame_rcvd_size =
-			    sizeof(struct sas_identify_frame);
-		} else if (phy->phy_type & PORT_TYPE_SATA) {
-			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
-			if (mvs_is_sig_fis_received(phy->irq_status)) {
-				phy->att_dev_sas_addr = i;	/* temp */
-				if (phy_st & PHY_OOB_DTCTD)
-					sas_phy->oob_mode = SATA_OOB_MODE;
-				phy->frame_rcvd_size =
-				    sizeof(struct dev_to_host_fis);
-				mvs_get_d2h_reg(mvi, i,
-						(void *)sas_phy->frame_rcvd);
-			} else {
-				dev_printk(KERN_DEBUG, &pdev->dev,
-					"No sig fis\n");
-				phy->phy_type &= ~(PORT_TYPE_SATA);
-				goto out_done;
-			}
-		}
-		tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
-		memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
-
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"phy[%d] Get Attached Address 0x%llX ,"
-			" SAS Address 0x%llX\n",
-			i,
-			(unsigned long long)phy->att_dev_sas_addr,
-			(unsigned long long)phy->dev_sas_addr);
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"Rate = %x , type = %d\n",
-			sas_phy->linkrate, phy->phy_type);
-
-		/* workaround for HW phy decoding error on 1.5g disk drive */
-		mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
-		tmp = mvs_read_port_vsr_data(mvi, i);
-		if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
-		     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
-			SAS_LINK_RATE_1_5_GBPS)
-			tmp &= ~PHY_MODE6_LATECLK;
-		else
-			tmp |= PHY_MODE6_LATECLK;
-		mvs_write_port_vsr_data(mvi, i, tmp);
-
-	}
-out_done:
-	if (get_st)
-		mvs_write_port_irq_stat(mvi, i, phy->irq_status);
-}
-
-static void mvs_port_formed(struct asd_sas_phy *sas_phy)
-{
-	struct sas_ha_struct *sas_ha = sas_phy->ha;
-	struct mvs_info *mvi = sas_ha->lldd_ha;
-	struct asd_sas_port *sas_port = sas_phy->port;
-	struct mvs_phy *phy = sas_phy->lldd_phy;
-	struct mvs_port *port = &mvi->port[sas_port->id];
-	unsigned long flags;
-
-	spin_lock_irqsave(&mvi->lock, flags);
-	port->port_attached = 1;
-	phy->port = port;
-	port->taskfileset = MVS_ID_NOT_MAPPED;
-	if (phy->phy_type & PORT_TYPE_SAS) {
-		port->wide_port_phymap = sas_port->phy_mask;
-		mvs_update_wideport(mvi, sas_phy->id);
-	}
-	spin_unlock_irqrestore(&mvi->lock, flags);
-}
-
-static int mvs_I_T_nexus_reset(struct domain_device *dev)
-{
-	return TMF_RESP_FUNC_FAILED;
-}
-
-static int __devinit mvs_hw_init(struct mvs_info *mvi)
-{
-	void __iomem *regs = mvi->regs;
-	int i;
-	u32 tmp, cctl;
-
-	/* make sure interrupts are masked immediately (paranoia) */
-	mw32(GBL_CTL, 0);
-	tmp = mr32(GBL_CTL);
-
-	/* Reset Controller */
-	if (!(tmp & HBA_RST)) {
-		if (mvi->flags & MVF_PHY_PWR_FIX) {
-			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
-			tmp &= ~PCTL_PWR_ON;
-			tmp |= PCTL_OFF;
-			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
-			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
-			tmp &= ~PCTL_PWR_ON;
-			tmp |= PCTL_OFF;
-			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-		}
-
-		/* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
-		mw32_f(GBL_CTL, HBA_RST);
-	}
-
-	/* wait for reset to finish; timeout is just a guess */
-	i = 1000;
-	while (i-- > 0) {
-		msleep(10);
-
-		if (!(mr32(GBL_CTL) & HBA_RST))
-			break;
-	}
-	if (mr32(GBL_CTL) & HBA_RST) {
-		dev_printk(KERN_ERR, &mvi->pdev->dev, "HBA reset failed\n");
-		return -EBUSY;
-	}
-
-	/* Init Chip */
-	/* make sure RST is set; HBA_RST /should/ have done that for us */
-	cctl = mr32(CTL);
-	if (cctl & CCTL_RST)
-		cctl &= ~CCTL_RST;
-	else
-		mw32_f(CTL, cctl | CCTL_RST);
-
-	/* write to device control _AND_ device status register? - A.C. */
-	pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
-	tmp &= ~PRD_REQ_MASK;
-	tmp |= PRD_REQ_SIZE;
-	pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
-
-	pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
-	tmp |= PCTL_PWR_ON;
-	tmp &= ~PCTL_OFF;
-	pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
-	pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
-	tmp |= PCTL_PWR_ON;
-	tmp &= ~PCTL_OFF;
-	pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-
-	mw32_f(CTL, cctl);
-
-	/* reset control */
-	mw32(PCS, 0);		/*MVS_PCS */
-
-	mvs_phy_hacks(mvi);
-
-	mw32(CMD_LIST_LO, mvi->slot_dma);
-	mw32(CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
-
-	mw32(RX_FIS_LO, mvi->rx_fis_dma);
-	mw32(RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
-
-	mw32(TX_CFG, MVS_CHIP_SLOT_SZ);
-	mw32(TX_LO, mvi->tx_dma);
-	mw32(TX_HI, (mvi->tx_dma >> 16) >> 16);
-
-	mw32(RX_CFG, MVS_RX_RING_SZ);
-	mw32(RX_LO, mvi->rx_dma);
-	mw32(RX_HI, (mvi->rx_dma >> 16) >> 16);
-
-	/* enable auto port detection */
-	mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
-	msleep(1100);
-	/* init and reset phys */
-	for (i = 0; i < mvi->chip->n_phy; i++) {
-		u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
-		u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
-
-		mvs_detect_porttype(mvi, i);
-
-		/* set phy local SAS address */
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
-		mvs_write_port_cfg_data(mvi, i, lo);
-		mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
-		mvs_write_port_cfg_data(mvi, i, hi);
-
-		/* reset phy */
-		tmp = mvs_read_phy_ctl(mvi, i);
-		tmp |= PHY_RST;
-		mvs_write_phy_ctl(mvi, i, tmp);
-	}
-
-	msleep(100);
-
-	for (i = 0; i < mvi->chip->n_phy; i++) {
-		/* clear phy int status */
-		tmp = mvs_read_port_irq_stat(mvi, i);
-		tmp &= ~PHYEV_SIG_FIS;
-		mvs_write_port_irq_stat(mvi, i, tmp);
-
-		/* set phy int mask */
-		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
-			PHYEV_ID_DONE | PHYEV_DEC_ERR;
-		mvs_write_port_irq_mask(mvi, i, tmp);
-
-		msleep(100);
-		mvs_update_phyinfo(mvi, i, 1);
-		mvs_enable_xmt(mvi, i);
-	}
-
-	/* FIXME: update wide port bitmaps */
-
-	/* little endian for open address and command table, etc. */
-	/* A.C.
-	 * it seems that ( from the spec ) turning on big-endian won't
-	 * do us any good on big-endian machines, need further confirmation
-	 */
-	cctl = mr32(CTL);
-	cctl |= CCTL_ENDIAN_CMD;
-	cctl |= CCTL_ENDIAN_DATA;
-	cctl &= ~CCTL_ENDIAN_OPEN;
-	cctl |= CCTL_ENDIAN_RSP;
-	mw32_f(CTL, cctl);
-
-	/* reset CMD queue */
-	tmp = mr32(PCS);
-	tmp |= PCS_CMD_RST;
-	mw32(PCS, tmp);
-	/* interrupt coalescing may cause missing HW interrput in some case,
-	 * and the max count is 0x1ff, while our max slot is 0x200,
-	 * it will make count 0.
-	 */
-	tmp = 0;
-	mw32(INT_COAL, tmp);
-
-	tmp = 0x100;
-	mw32(INT_COAL_TMOUT, tmp);
-
-	/* ladies and gentlemen, start your engines */
-	mw32(TX_CFG, 0);
-	mw32(TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
-	mw32(RX_CFG, MVS_RX_RING_SZ | RX_EN);
-	/* enable CMD/CMPL_Q/RESP mode */
-	mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
-
-	/* enable completion queue interrupt */
-	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
-	mw32(INT_MASK, tmp);
-
-	/* Enable SRS interrupt */
-	mw32(INT_MASK_SRS, 0xFF);
-	return 0;
-}
-
-static void __devinit mvs_print_info(struct mvs_info *mvi)
-{
-	struct pci_dev *pdev = mvi->pdev;
-	static int printed_version;
-
-	if (!printed_version++)
-		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
-
-	dev_printk(KERN_INFO, &pdev->dev, "%u phys, addr %llx\n",
-		   mvi->chip->n_phy, SAS_ADDR(mvi->sas_addr));
-}
-
-static int __devinit mvs_pci_init(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
-{
-	int rc;
-	struct mvs_info *mvi;
-	irq_handler_t irq_handler = mvs_interrupt;
-
-	rc = pci_enable_device(pdev);
-	if (rc)
-		return rc;
-
-	pci_set_master(pdev);
-
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc)
-		goto err_out_disable;
-
-	rc = pci_go_64(pdev);
-	if (rc)
-		goto err_out_regions;
-
-	mvi = mvs_alloc(pdev, ent);
-	if (!mvi) {
-		rc = -ENOMEM;
-		goto err_out_regions;
-	}
-
-	rc = mvs_hw_init(mvi);
-	if (rc)
-		goto err_out_mvi;
-
-#ifndef MVS_DISABLE_MSI
-	if (!pci_enable_msi(pdev)) {
-		u32 tmp;
-		void __iomem *regs = mvi->regs;
-		mvi->flags |= MVF_MSI;
-		irq_handler = mvs_msi_interrupt;
-		tmp = mr32(PCS);
-		mw32(PCS, tmp | PCS_SELF_CLEAR);
-	}
-#endif
-
-	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
-	if (rc)
-		goto err_out_msi;
-
-	rc = scsi_add_host(mvi->shost, &pdev->dev);
-	if (rc)
-		goto err_out_irq;
-
-	rc = sas_register_ha(&mvi->sas);
-	if (rc)
-		goto err_out_shost;
-
-	pci_set_drvdata(pdev, mvi);
-
-	mvs_print_info(mvi);
-
-	mvs_hba_interrupt_enable(mvi);
-
-	scsi_scan_host(mvi->shost);
-
-	return 0;
-
-err_out_shost:
-	scsi_remove_host(mvi->shost);
-err_out_irq:
-	free_irq(pdev->irq, mvi);
-err_out_msi:
-	if (mvi->flags |= MVF_MSI)
-		pci_disable_msi(pdev);
-err_out_mvi:
-	mvs_free(mvi);
-err_out_regions:
-	pci_release_regions(pdev);
-err_out_disable:
-	pci_disable_device(pdev);
-	return rc;
-}
-
-static void __devexit mvs_pci_remove(struct pci_dev *pdev)
-{
-	struct mvs_info *mvi = pci_get_drvdata(pdev);
-
-	pci_set_drvdata(pdev, NULL);
-
-	if (mvi) {
-		sas_unregister_ha(&mvi->sas);
-		mvs_hba_interrupt_disable(mvi);
-		sas_remove_host(mvi->shost);
-		scsi_remove_host(mvi->shost);
-
-		free_irq(pdev->irq, mvi);
-		if (mvi->flags & MVF_MSI)
-			pci_disable_msi(pdev);
-		mvs_free(mvi);
-		pci_release_regions(pdev);
-	}
-	pci_disable_device(pdev);
-}
-
-static struct sas_domain_function_template mvs_transport_ops = {
-	.lldd_execute_task	= mvs_task_exec,
-	.lldd_control_phy	= mvs_phy_control,
-	.lldd_abort_task	= mvs_task_abort,
-	.lldd_port_formed	= mvs_port_formed,
-	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
-};
-
-static struct pci_device_id __devinitdata mvs_pci_table[] = {
-	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
-	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
-	{
-		.vendor 	= PCI_VENDOR_ID_MARVELL,
-		.device 	= 0x6440,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= 0x6480,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= chip_6480,
-	},
-	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
-	{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
-
-	{ }	/* terminate list */
-};
-
-static struct pci_driver mvs_pci_driver = {
-	.name		= DRV_NAME,
-	.id_table	= mvs_pci_table,
-	.probe		= mvs_pci_init,
-	.remove		= __devexit_p(mvs_pci_remove),
-};
-
-static int __init mvs_init(void)
-{
-	int rc;
-
-	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
-	if (!mvs_stt)
-		return -ENOMEM;
-
-	rc = pci_register_driver(&mvs_pci_driver);
-	if (rc)
-		goto err_out;
-
-	return 0;
-
-err_out:
-	sas_release_transport(mvs_stt);
-	return rc;
-}
-
-static void __exit mvs_exit(void)
-{
-	pci_unregister_driver(&mvs_pci_driver);
-	sas_release_transport(mvs_stt);
-}
-
-module_init(mvs_init);
-module_exit(mvs_exit);
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, mvs_pci_table);
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
new file mode 100644
index 00000000000..6de7af27e50
--- /dev/null
+++ b/drivers/scsi/mvsas/Kconfig
@@ -0,0 +1,42 @@
+#
+# Kernel configuration file for 88SE64XX/88SE94XX SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the 88SE64XX/88SE94XX driver.
+#
+# The 88SE64XX/88SE94XX driver is free software; you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The 88SE64XX/88SE94XX driver is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with 88SE64XX/88SE94XX Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+
+config SCSI_MVSAS
+	tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
+	depends on PCI
+	select SCSI_SAS_LIBSAS
+	select FW_LOADER
+	help
+		This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s
+		PCI-E 88SE94XX chip based host adapters.
+
+config SCSI_MVSAS_DEBUG
+	bool "Compile in debug mode"
+	default y
+	depends on SCSI_MVSAS
+	help
+		Compiles the 88SE64XX/88SE94XX driver in debug mode.  In debug mode,
+		the driver prints some messages to the console.
diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile
new file mode 100644
index 00000000000..52ac4264677
--- /dev/null
+++ b/drivers/scsi/mvsas/Makefile
@@ -0,0 +1,32 @@
+#
+# Makefile for Marvell 88SE64xx/88SE84xx SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y)
+	EXTRA_CFLAGS += -DMV_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
+mvsas-y +=  mv_init.o  \
+           mv_sas.o   \
+           mv_64xx.o  \
+           mv_94xx.o
diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c
new file mode 100644
index 00000000000..10a5077b6ae
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.c
@@ -0,0 +1,793 @@
+/*
+ * Marvell 88SE64xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+static void mvs_64xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+
+	/* TODO check & save device type */
+	reg = mr32(MVS_GBL_PORT_TYPE);
+	phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	if (reg & MODE_SAS_SATA & (1 << i))
+		phy->phy_type |= PORT_TYPE_SAS;
+	else
+		phy->phy_type |= PORT_TYPE_SATA;
+}
+
+static void __devinit mvs_64xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_PCS);
+	if (mvi->chip->n_phy <= 4)
+		tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT);
+	else
+		tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(MVS_PCS, tmp);
+}
+
+static void __devinit mvs_64xx_phy_hacks(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+
+	mvs_phy_hacks(mvi);
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		/* TEST - for phy decoding error, adjust voltage levels */
+		mw32(MVS_P0_VSR_ADDR + 0, 0x8);
+		mw32(MVS_P0_VSR_DATA + 0, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 8, 0x8);
+		mw32(MVS_P0_VSR_DATA + 8, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 16, 0x8);
+		mw32(MVS_P0_VSR_DATA + 16, 0x2F0);
+
+		mw32(MVS_P0_VSR_ADDR + 24, 0x8);
+		mw32(MVS_P0_VSR_DATA + 24, 0x2F0);
+	} else {
+		int i;
+		/* disable auto port detection */
+		mw32(MVS_GBL_PORT_TYPE, 0);
+		for (i = 0; i < mvi->chip->n_phy; i++) {
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE7);
+			mvs_write_port_vsr_data(mvi, i, 0x90000000);
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE9);
+			mvs_write_port_vsr_data(mvi, i, 0x50f2);
+			mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE11);
+			mvs_write_port_vsr_data(mvi, i, 0x0e);
+		}
+	}
+}
+
+static void mvs_64xx_stp_reset(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg, tmp;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		if (phy_id < 4)
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &reg);
+		else
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &reg);
+
+	} else
+		reg = mr32(MVS_PHY_CTL);
+
+	tmp = reg;
+	if (phy_id < 4)
+		tmp |= (1U << phy_id) << PCTL_LINK_OFFS;
+	else
+		tmp |= (1U << (phy_id - 4)) << PCTL_LINK_OFFS;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		if (phy_id < 4) {
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+			mdelay(10);
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, reg);
+		} else {
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+			mdelay(10);
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, reg);
+		}
+	} else {
+		mw32(MVS_PHY_CTL, tmp);
+		mdelay(10);
+		mw32(MVS_PHY_CTL, reg);
+	}
+}
+
+static void mvs_64xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+	u32 tmp;
+	tmp = mvs_read_port_irq_stat(mvi, phy_id);
+	tmp &= ~PHYEV_RDY_CH;
+	mvs_write_port_irq_stat(mvi, phy_id, tmp);
+	tmp = mvs_read_phy_ctl(mvi, phy_id);
+	if (hard)
+		tmp |= PHY_RST_HARD;
+	else
+		tmp |= PHY_RST;
+	mvs_write_phy_ctl(mvi, phy_id, tmp);
+	if (hard) {
+		do {
+			tmp = mvs_read_phy_ctl(mvi, phy_id);
+		} while (tmp & PHY_RST_HARD);
+	}
+}
+
+static int __devinit mvs_64xx_chip_reset(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	int i;
+
+	/* make sure interrupts are masked immediately (paranoia) */
+	mw32(MVS_GBL_CTL, 0);
+	tmp = mr32(MVS_GBL_CTL);
+
+	/* Reset Controller */
+	if (!(tmp & HBA_RST)) {
+		if (mvi->flags & MVF_PHY_PWR_FIX) {
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+			tmp &= ~PCTL_PWR_OFF;
+			tmp |= PCTL_PHY_DSBL;
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+			pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+			tmp &= ~PCTL_PWR_OFF;
+			tmp |= PCTL_PHY_DSBL;
+			pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+		}
+	}
+
+	/* make sure interrupts are masked immediately (paranoia) */
+	mw32(MVS_GBL_CTL, 0);
+	tmp = mr32(MVS_GBL_CTL);
+
+	/* Reset Controller */
+	if (!(tmp & HBA_RST)) {
+		/* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
+		mw32_f(MVS_GBL_CTL, HBA_RST);
+	}
+
+	/* wait for reset to finish; timeout is just a guess */
+	i = 1000;
+	while (i-- > 0) {
+		msleep(10);
+
+		if (!(mr32(MVS_GBL_CTL) & HBA_RST))
+			break;
+	}
+	if (mr32(MVS_GBL_CTL) & HBA_RST) {
+		dev_printk(KERN_ERR, mvi->dev, "HBA reset failed\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static void mvs_64xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		u32 offs;
+		if (phy_id < 4)
+			offs = PCR_PHY_CTL;
+		else {
+			offs = PCR_PHY_CTL2;
+			phy_id -= 4;
+		}
+		pci_read_config_dword(mvi->pdev, offs, &tmp);
+		tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+		pci_write_config_dword(mvi->pdev, offs, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+		mw32(MVS_PHY_CTL, tmp);
+	}
+}
+
+static void mvs_64xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		u32 offs;
+		if (phy_id < 4)
+			offs = PCR_PHY_CTL;
+		else {
+			offs = PCR_PHY_CTL2;
+			phy_id -= 4;
+		}
+		pci_read_config_dword(mvi->pdev, offs, &tmp);
+		tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+		pci_write_config_dword(mvi->pdev, offs, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+		mw32(MVS_PHY_CTL, tmp);
+	}
+}
+
+static int __devinit mvs_64xx_init(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	int i;
+	u32 tmp, cctl;
+
+	if (mvi->pdev && mvi->pdev->revision == 0)
+		mvi->flags |= MVF_PHY_PWR_FIX;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		mvs_show_pcie_usage(mvi);
+		tmp = mvs_64xx_chip_reset(mvi);
+		if (tmp)
+			return tmp;
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_PHY_DSBL;
+		mw32(MVS_PHY_CTL, tmp);
+	}
+
+	/* Init Chip */
+	/* make sure RST is set; HBA_RST /should/ have done that for us */
+	cctl = mr32(MVS_CTL) & 0xFFFF;
+	if (cctl & CCTL_RST)
+		cctl &= ~CCTL_RST;
+	else
+		mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		/* write to device control _AND_ device status register */
+		pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
+		tmp &= ~PRD_REQ_MASK;
+		tmp |= PRD_REQ_SIZE;
+		pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
+
+		pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp &= ~PCTL_PHY_DSBL;
+		pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+		pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+		tmp &= PCTL_PWR_OFF;
+		tmp &= ~PCTL_PHY_DSBL;
+		pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+	} else {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_COM_ON;
+		tmp &= ~PCTL_PHY_DSBL;
+		tmp |= PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+		tmp &= ~PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+	}
+
+	/* reset control */
+	mw32(MVS_PCS, 0);		/* MVS_PCS */
+	/* init phys */
+	mvs_64xx_phy_hacks(mvi);
+
+	/* enable auto port detection */
+	mw32(MVS_GBL_PORT_TYPE, MODE_AUTO_DET_EN);
+
+	mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+	mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+	mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+	mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+	mw32(MVS_TX_LO, mvi->tx_dma);
+	mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+	mw32(MVS_RX_LO, mvi->rx_dma);
+	mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* set phy local SAS address */
+		/* should set little endian SAS address to 64xx chip */
+		mvs_set_sas_addr(mvi, i, PHYR_ADDR_LO, PHYR_ADDR_HI,
+				cpu_to_be64(mvi->phy[i].dev_sas_addr));
+
+		mvs_64xx_enable_xmt(mvi, i);
+
+		mvs_64xx_phy_reset(mvi, i, 1);
+		msleep(500);
+		mvs_64xx_detect_porttype(mvi, i);
+	}
+	if (mvi->flags & MVF_FLAG_SOC) {
+		/* set select registers */
+		writel(0x0E008000, regs + 0x000);
+		writel(0x59000008, regs + 0x004);
+		writel(0x20, regs + 0x008);
+		writel(0x20, regs + 0x00c);
+		writel(0x20, regs + 0x010);
+		writel(0x20, regs + 0x014);
+		writel(0x20, regs + 0x018);
+		writel(0x20, regs + 0x01c);
+	}
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* clear phy int status */
+		tmp = mvs_read_port_irq_stat(mvi, i);
+		tmp &= ~PHYEV_SIG_FIS;
+		mvs_write_port_irq_stat(mvi, i, tmp);
+
+		/* set phy int mask */
+		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
+			PHYEV_ID_DONE | PHYEV_DCDR_ERR | PHYEV_CRC_ERR |
+			PHYEV_DEC_ERR;
+		mvs_write_port_irq_mask(mvi, i, tmp);
+
+		msleep(100);
+		mvs_update_phyinfo(mvi, i, 1);
+	}
+
+	/* FIXME: update wide port bitmaps */
+
+	/* little endian for open address and command table, etc. */
+	/*
+	 * it seems that ( from the spec ) turning on big-endian won't
+	 * do us any good on big-endian machines, need further confirmation
+	 */
+	cctl = mr32(MVS_CTL);
+	cctl |= CCTL_ENDIAN_CMD;
+	cctl |= CCTL_ENDIAN_DATA;
+	cctl &= ~CCTL_ENDIAN_OPEN;
+	cctl |= CCTL_ENDIAN_RSP;
+	mw32_f(MVS_CTL, cctl);
+
+	/* reset CMD queue */
+	tmp = mr32(MVS_PCS);
+	tmp |= PCS_CMD_RST;
+	mw32(MVS_PCS, tmp);
+	/* interrupt coalescing may cause missing HW interrput in some case,
+	 * and the max count is 0x1ff, while our max slot is 0x200,
+	 * it will make count 0.
+	 */
+	tmp = 0;
+	mw32(MVS_INT_COAL, tmp);
+
+	tmp = 0x100;
+	mw32(MVS_INT_COAL_TMOUT, tmp);
+
+	/* ladies and gentlemen, start your engines */
+	mw32(MVS_TX_CFG, 0);
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+	/* enable CMD/CMPL_Q/RESP mode */
+	mw32(MVS_PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN |
+		PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+	/* enable completion queue interrupt */
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+		CINT_DMA_PCIE);
+
+	mw32(MVS_INT_MASK, tmp);
+
+	/* Enable SRS interrupt */
+	mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+	return 0;
+}
+
+static int mvs_64xx_ioremap(struct mvs_info *mvi)
+{
+	if (!mvs_ioremap(mvi, 4, 2))
+		return 0;
+	return -1;
+}
+
+static void mvs_64xx_iounmap(struct mvs_info *mvi)
+{
+	mvs_iounmap(mvi->regs);
+	mvs_iounmap(mvi->regs_ex);
+}
+
+static void mvs_64xx_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	mw32(MVS_GBL_CTL, tmp | INT_EN);
+}
+
+static void mvs_64xx_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	mw32(MVS_GBL_CTL, tmp & ~INT_EN);
+}
+
+static u32 mvs_64xx_isr_status(struct mvs_info *mvi, int irq)
+{
+	void __iomem *regs = mvi->regs;
+	u32 stat;
+
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		stat = mr32(MVS_GBL_INT_STAT);
+
+		if (stat == 0 || stat == 0xffffffff)
+			return 0;
+	} else
+		stat = 1;
+	return stat;
+}
+
+static irqreturn_t mvs_64xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+	void __iomem *regs = mvi->regs;
+
+	/* clear CMD_CMPLT ASAP */
+	mw32_f(MVS_INT_STAT, CINT_DONE);
+#ifndef MVS_USE_TASKLET
+	spin_lock(&mvi->lock);
+#endif
+	mvs_int_full(mvi);
+#ifndef MVS_USE_TASKLET
+	spin_unlock(&mvi->lock);
+#endif
+	return IRQ_HANDLED;
+}
+
+static void mvs_64xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+	u32 tmp;
+	mvs_cw32(mvi, 0x40 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	mvs_cw32(mvi, 0x00 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x00 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x40 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_64xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	if (type == PORT_TYPE_SATA) {
+		tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	}
+	mw32(MVS_INT_STAT, CINT_CI_STOP);
+	tmp = mr32(MVS_PCS) | 0xFF00;
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_64xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, offs;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+	if (*tfs < 16) {
+		tmp = mr32(MVS_PCS);
+		mw32(MVS_PCS, tmp & ~offs);
+	} else {
+		tmp = mr32(MVS_CTL);
+		mw32(MVS_CTL, tmp & ~offs);
+	}
+
+	tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << *tfs);
+	if (tmp)
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+
+	*tfs = MVS_ID_NOT_MAPPED;
+	return;
+}
+
+static u8 mvs_64xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	int i;
+	u32 tmp, offs;
+	void __iomem *regs = mvi->regs;
+
+	if (*tfs != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	tmp = mr32(MVS_PCS);
+
+	for (i = 0; i < mvi->chip->srs_sz; i++) {
+		if (i == 16)
+			tmp = mr32(MVS_CTL);
+		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+		if (!(tmp & offs)) {
+			*tfs = i;
+
+			if (i < 16)
+				mw32(MVS_PCS, tmp | offs);
+			else
+				mw32(MVS_CTL, tmp | offs);
+			tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << i);
+			if (tmp)
+				mw32(MVS_INT_STAT_SRS_0, tmp);
+			return 0;
+		}
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+
+void mvs_64xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct mvs_prd *buf_prd = prd;
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd++;
+	}
+}
+
+static int mvs_64xx_oob_done(struct mvs_info *mvi, int i)
+{
+	u32 phy_st;
+	mvs_write_port_cfg_addr(mvi, i,
+			PHYR_PHY_STAT);
+	phy_st = mvs_read_port_cfg_data(mvi, i);
+	if (phy_st & PHY_OOB_DTCTD)
+		return 1;
+	return 0;
+}
+
+static void mvs_64xx_fix_phy_info(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id)
+
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	sas_phy->linkrate =
+		(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+			PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+
+	phy->minimum_linkrate =
+		(phy->phy_status &
+			PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+	phy->maximum_linkrate =
+		(phy->phy_status &
+			PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
+	phy->dev_info = mvs_read_port_cfg_data(mvi, i);
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
+	phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
+
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+	phy->att_dev_sas_addr =
+	     (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+	mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+	phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
+	phy->att_dev_sas_addr = SAS_ADDR(&phy->att_dev_sas_addr);
+}
+
+static void mvs_64xx_phy_work_around(struct mvs_info *mvi, int i)
+{
+	u32 tmp;
+	struct mvs_phy *phy = &mvi->phy[i];
+	/* workaround for HW phy decoding error on 1.5g disk drive */
+	mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
+	tmp = mvs_read_port_vsr_data(mvi, i);
+	if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+	     PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
+		SAS_LINK_RATE_1_5_GBPS)
+		tmp &= ~PHY_MODE6_LATECLK;
+	else
+		tmp |= PHY_MODE6_LATECLK;
+	mvs_write_port_vsr_data(mvi, i, tmp);
+}
+
+void mvs_64xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+			struct sas_phy_linkrates *rates)
+{
+	u32 lrmin = 0, lrmax = 0;
+	u32 tmp;
+
+	tmp = mvs_read_phy_ctl(mvi, phy_id);
+	lrmin = (rates->minimum_linkrate << 8);
+	lrmax = (rates->maximum_linkrate << 12);
+
+	if (lrmin) {
+		tmp &= ~(0xf << 8);
+		tmp |= lrmin;
+	}
+	if (lrmax) {
+		tmp &= ~(0xf << 12);
+		tmp |= lrmax;
+	}
+	mvs_write_phy_ctl(mvi, phy_id, tmp);
+	mvs_64xx_phy_reset(mvi, phy_id, 1);
+}
+
+static void mvs_64xx_clear_active_cmds(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_PCS);
+	mw32(MVS_PCS, tmp & 0xFFFF);
+	mw32(MVS_PCS, tmp);
+	tmp = mr32(MVS_CTL);
+	mw32(MVS_CTL, tmp & 0xFFFF);
+	mw32(MVS_CTL, tmp);
+}
+
+
+u32 mvs_64xx_spi_read_data(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	return ior32(SPI_DATA_REG_64XX);
+}
+
+void mvs_64xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+	void __iomem *regs = mvi->regs_ex;
+	 iow32(SPI_DATA_REG_64XX, data);
+}
+
+
+int mvs_64xx_spi_buildcmd(struct mvs_info *mvi,
+			u32      *dwCmd,
+			u8       cmd,
+			u8       read,
+			u8       length,
+			u32      addr
+			)
+{
+	u32  dwTmp;
+
+	dwTmp = ((u32)cmd << 24) | ((u32)length << 19);
+	if (read)
+		dwTmp |= 1U<<23;
+
+	if (addr != MV_MAX_U32) {
+		dwTmp |= 1U<<22;
+		dwTmp |= (addr & 0x0003FFFF);
+	}
+
+	*dwCmd = dwTmp;
+	return 0;
+}
+
+
+int mvs_64xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+	void __iomem *regs = mvi->regs_ex;
+	int     retry;
+
+	for (retry = 0; retry < 1; retry++) {
+		iow32(SPI_CTRL_REG_64XX, SPI_CTRL_VENDOR_ENABLE);
+		iow32(SPI_CMD_REG_64XX, cmd);
+		iow32(SPI_CTRL_REG_64XX,
+			SPI_CTRL_VENDOR_ENABLE | SPI_CTRL_SPISTART);
+	}
+
+	return 0;
+}
+
+int mvs_64xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 i, dwTmp;
+
+	for (i = 0; i < timeout; i++) {
+		dwTmp = ior32(SPI_CTRL_REG_64XX);
+		if (!(dwTmp & SPI_CTRL_SPISTART))
+			return 0;
+		msleep(10);
+	}
+
+	return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_64xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+	int i;
+	struct mvs_prd *buf_prd = prd;
+	buf_prd	+= from;
+	for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+		buf_prd->addr = cpu_to_le64(buf_dma);
+		buf_prd->len = cpu_to_le32(buf_len);
+		++buf_prd;
+	}
+}
+#endif
+
+const struct mvs_dispatch mvs_64xx_dispatch = {
+	"mv64xx",
+	mvs_64xx_init,
+	NULL,
+	mvs_64xx_ioremap,
+	mvs_64xx_iounmap,
+	mvs_64xx_isr,
+	mvs_64xx_isr_status,
+	mvs_64xx_interrupt_enable,
+	mvs_64xx_interrupt_disable,
+	mvs_read_phy_ctl,
+	mvs_write_phy_ctl,
+	mvs_read_port_cfg_data,
+	mvs_write_port_cfg_data,
+	mvs_write_port_cfg_addr,
+	mvs_read_port_vsr_data,
+	mvs_write_port_vsr_data,
+	mvs_write_port_vsr_addr,
+	mvs_read_port_irq_stat,
+	mvs_write_port_irq_stat,
+	mvs_read_port_irq_mask,
+	mvs_write_port_irq_mask,
+	mvs_get_sas_addr,
+	mvs_64xx_command_active,
+	mvs_64xx_issue_stop,
+	mvs_start_delivery,
+	mvs_rx_update,
+	mvs_int_full,
+	mvs_64xx_assign_reg_set,
+	mvs_64xx_free_reg_set,
+	mvs_get_prd_size,
+	mvs_get_prd_count,
+	mvs_64xx_make_prd,
+	mvs_64xx_detect_porttype,
+	mvs_64xx_oob_done,
+	mvs_64xx_fix_phy_info,
+	mvs_64xx_phy_work_around,
+	mvs_64xx_phy_set_link_rate,
+	mvs_hw_max_link_rate,
+	mvs_64xx_phy_disable,
+	mvs_64xx_phy_enable,
+	mvs_64xx_phy_reset,
+	mvs_64xx_stp_reset,
+	mvs_64xx_clear_active_cmds,
+	mvs_64xx_spi_read_data,
+	mvs_64xx_spi_write_data,
+	mvs_64xx_spi_buildcmd,
+	mvs_64xx_spi_issuecmd,
+	mvs_64xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvs_64xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
new file mode 100644
index 00000000000..42e947d9795
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -0,0 +1,151 @@
+/*
+ * Marvell 88SE64xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_3_0_GBPS
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x200, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x204, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
+
+	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x230, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x234, /* Port4 config data */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
+	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_VSR_ADDR		= 0x250, /* port4 VSR addr */
+	MVS_P4_VSR_DATA		= 0x254, /* port4 VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0xE8,
+	PCR_LINK_STAT		= 0xF2,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01, /* phy tx */
+	VSR_PHY_MODE2		= 0x02, /* tx scc */
+	VSR_PHY_MODE3		= 0x03, /* pll */
+	VSR_PHY_MODE4		= 0x04, /* VCO */
+	VSR_PHY_MODE5		= 0x05, /* Rx */
+	VSR_PHY_MODE6		= 0x06, /* CDR */
+	VSR_PHY_MODE7		= 0x07, /* Impedance */
+	VSR_PHY_MODE8		= 0x08, /* Voltage */
+	VSR_PHY_MODE9		= 0x09, /* Test */
+	VSR_PHY_MODE10		= 0x0A, /* Power */
+	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+#define MAX_SG_ENTRY		64
+
+struct mvs_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	__le32			reserved;
+	__le32			len;		/* 16-bit length */
+};
+
+#define SPI_CTRL_REG				0xc0
+#define SPI_CTRL_VENDOR_ENABLE		(1U<<29)
+#define SPI_CTRL_SPIRDY         		(1U<<22)
+#define SPI_CTRL_SPISTART			(1U<<20)
+
+#define SPI_CMD_REG		0xc4
+#define SPI_DATA_REG		0xc8
+
+#define SPI_CTRL_REG_64XX		0x10
+#define SPI_CMD_REG_64XX		0x14
+#define SPI_DATA_REG_64XX		0x18
+
+#endif
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
new file mode 100644
index 00000000000..0940fae19d2
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -0,0 +1,672 @@
+/*
+ * Marvell 88SE94xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_94xx.h"
+#include "mv_chips.h"
+
+static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+	u32 phy_status;
+
+	mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE3);
+	reg = mvs_read_port_vsr_data(mvi, i);
+	phy_status = ((reg & 0x3f0000) >> 16) & 0xff;
+	phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	switch (phy_status) {
+	case 0x10:
+		phy->phy_type |= PORT_TYPE_SAS;
+		break;
+	case 0x1d:
+	default:
+		phy->phy_type |= PORT_TYPE_SATA;
+		break;
+	}
+}
+
+static void __devinit mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(MVS_PCS);
+	tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+	u32 tmp;
+
+	tmp = mvs_read_port_irq_stat(mvi, phy_id);
+	tmp &= ~PHYEV_RDY_CH;
+	mvs_write_port_irq_stat(mvi, phy_id, tmp);
+	if (hard) {
+		tmp = mvs_read_phy_ctl(mvi, phy_id);
+		tmp |= PHY_RST_HARD;
+		mvs_write_phy_ctl(mvi, phy_id, tmp);
+		do {
+			tmp = mvs_read_phy_ctl(mvi, phy_id);
+		} while (tmp & PHY_RST_HARD);
+	} else {
+		mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_STAT);
+		tmp = mvs_read_port_vsr_data(mvi, phy_id);
+		tmp |= PHY_RST;
+		mvs_write_port_vsr_data(mvi, phy_id, tmp);
+	}
+}
+
+static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+	u32 tmp;
+	mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+	tmp = mvs_read_port_vsr_data(mvi, phy_id);
+	mvs_write_port_vsr_data(mvi, phy_id, tmp | 0x00800000);
+}
+
+static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+	mvs_write_port_vsr_addr(mvi, phy_id, 0x1B4);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
+	mvs_write_port_vsr_addr(mvi, phy_id, 0x104);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x00018080);
+	mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+	mvs_write_port_vsr_data(mvi, phy_id, 0x00207fff);
+}
+
+static int __devinit mvs_94xx_init(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	int i;
+	u32 tmp, cctl;
+
+	mvs_show_pcie_usage(mvi);
+	if (mvi->flags & MVF_FLAG_SOC) {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_PHY_DSBL;
+		mw32(MVS_PHY_CTL, tmp);
+	}
+
+	/* Init Chip */
+	/* make sure RST is set; HBA_RST /should/ have done that for us */
+	cctl = mr32(MVS_CTL) & 0xFFFF;
+	if (cctl & CCTL_RST)
+		cctl &= ~CCTL_RST;
+	else
+		mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+	if (mvi->flags & MVF_FLAG_SOC) {
+		tmp = mr32(MVS_PHY_CTL);
+		tmp &= ~PCTL_PWR_OFF;
+		tmp |= PCTL_COM_ON;
+		tmp &= ~PCTL_PHY_DSBL;
+		tmp |= PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+		tmp &= ~PCTL_LINK_RST;
+		mw32(MVS_PHY_CTL, tmp);
+		msleep(100);
+	}
+
+	/* reset control */
+	mw32(MVS_PCS, 0);		/* MVS_PCS */
+	mw32(MVS_STP_REG_SET_0, 0);
+	mw32(MVS_STP_REG_SET_1, 0);
+
+	/* init phys */
+	mvs_phy_hacks(mvi);
+
+	/* disable Multiplexing, enable phy implemented */
+	mw32(MVS_PORTS_IMP, 0xFF);
+
+
+	mw32(MVS_PA_VSR_ADDR, 0x00000104);
+	mw32(MVS_PA_VSR_PORT, 0x00018080);
+	mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE8);
+	mw32(MVS_PA_VSR_PORT, 0x0084ffff);
+
+	/* set LED blink when IO*/
+	mw32(MVS_PA_VSR_ADDR, 0x00000030);
+	tmp = mr32(MVS_PA_VSR_PORT);
+	tmp &= 0xFFFF00FF;
+	tmp |= 0x00003300;
+	mw32(MVS_PA_VSR_PORT, tmp);
+
+	mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+	mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+	mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+	mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+	mw32(MVS_TX_LO, mvi->tx_dma);
+	mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+	mw32(MVS_RX_LO, mvi->rx_dma);
+	mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvs_94xx_phy_disable(mvi, i);
+		/* set phy local SAS address */
+		mvs_set_sas_addr(mvi, i, CONFIG_ID_FRAME3, CONFIG_ID_FRAME4,
+						(mvi->phy[i].dev_sas_addr));
+
+		mvs_94xx_enable_xmt(mvi, i);
+		mvs_94xx_phy_enable(mvi, i);
+
+		mvs_94xx_phy_reset(mvi, i, 1);
+		msleep(500);
+		mvs_94xx_detect_porttype(mvi, i);
+	}
+
+	if (mvi->flags & MVF_FLAG_SOC) {
+		/* set select registers */
+		writel(0x0E008000, regs + 0x000);
+		writel(0x59000008, regs + 0x004);
+		writel(0x20, regs + 0x008);
+		writel(0x20, regs + 0x00c);
+		writel(0x20, regs + 0x010);
+		writel(0x20, regs + 0x014);
+		writel(0x20, regs + 0x018);
+		writel(0x20, regs + 0x01c);
+	}
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		/* clear phy int status */
+		tmp = mvs_read_port_irq_stat(mvi, i);
+		tmp &= ~PHYEV_SIG_FIS;
+		mvs_write_port_irq_stat(mvi, i, tmp);
+
+		/* set phy int mask */
+		tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH |
+			PHYEV_ID_DONE  | PHYEV_DCDR_ERR | PHYEV_CRC_ERR ;
+		mvs_write_port_irq_mask(mvi, i, tmp);
+
+		msleep(100);
+		mvs_update_phyinfo(mvi, i, 1);
+	}
+
+	/* FIXME: update wide port bitmaps */
+
+	/* little endian for open address and command table, etc. */
+	/*
+	 * it seems that ( from the spec ) turning on big-endian won't
+	 * do us any good on big-endian machines, need further confirmation
+	 */
+	cctl = mr32(MVS_CTL);
+	cctl |= CCTL_ENDIAN_CMD;
+	cctl |= CCTL_ENDIAN_DATA;
+	cctl &= ~CCTL_ENDIAN_OPEN;
+	cctl |= CCTL_ENDIAN_RSP;
+	mw32_f(MVS_CTL, cctl);
+
+	/* reset CMD queue */
+	tmp = mr32(MVS_PCS);
+	tmp |= PCS_CMD_RST;
+	mw32(MVS_PCS, tmp);
+	/* interrupt coalescing may cause missing HW interrput in some case,
+	 * and the max count is 0x1ff, while our max slot is 0x200,
+	 * it will make count 0.
+	 */
+	tmp = 0;
+	mw32(MVS_INT_COAL, tmp);
+
+	tmp = 0x100;
+	mw32(MVS_INT_COAL_TMOUT, tmp);
+
+	/* ladies and gentlemen, start your engines */
+	mw32(MVS_TX_CFG, 0);
+	mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+	mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+	/* enable CMD/CMPL_Q/RESP mode */
+	mw32(MVS_PCS, PCS_SATA_RETRY_2 | PCS_FIS_RX_EN |
+		PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+	/* enable completion queue interrupt */
+	tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+		CINT_DMA_PCIE);
+	tmp |= CINT_PHY_MASK;
+	mw32(MVS_INT_MASK, tmp);
+
+	/* Enable SRS interrupt */
+	mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+	return 0;
+}
+
+static int mvs_94xx_ioremap(struct mvs_info *mvi)
+{
+	if (!mvs_ioremap(mvi, 2, -1)) {
+		mvi->regs_ex = mvi->regs + 0x10200;
+		mvi->regs += 0x20000;
+		if (mvi->id == 1)
+			mvi->regs += 0x4000;
+		return 0;
+	}
+	return -1;
+}
+
+static void mvs_94xx_iounmap(struct mvs_info *mvi)
+{
+	if (mvi->regs) {
+		mvi->regs -= 0x20000;
+		if (mvi->id == 1)
+			mvi->regs -= 0x4000;
+		mvs_iounmap(mvi->regs);
+	}
+}
+
+static void mvs_94xx_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+	tmp |= (IRQ_SAS_A | IRQ_SAS_B);
+	mw32(MVS_GBL_INT_STAT, tmp);
+	writel(tmp, regs + 0x0C);
+	writel(tmp, regs + 0x10);
+	writel(tmp, regs + 0x14);
+	writel(tmp, regs + 0x18);
+	mw32(MVS_GBL_CTL, tmp);
+}
+
+static void mvs_94xx_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 tmp;
+
+	tmp = mr32(MVS_GBL_CTL);
+
+	tmp &= ~(IRQ_SAS_A | IRQ_SAS_B);
+	mw32(MVS_GBL_INT_STAT, tmp);
+	writel(tmp, regs + 0x0C);
+	writel(tmp, regs + 0x10);
+	writel(tmp, regs + 0x14);
+	writel(tmp, regs + 0x18);
+	mw32(MVS_GBL_CTL, tmp);
+}
+
+static u32 mvs_94xx_isr_status(struct mvs_info *mvi, int irq)
+{
+	void __iomem *regs = mvi->regs_ex;
+	u32 stat = 0;
+	if (!(mvi->flags & MVF_FLAG_SOC)) {
+		stat = mr32(MVS_GBL_INT_STAT);
+
+		if (!(stat & (IRQ_SAS_A | IRQ_SAS_B)))
+			return 0;
+	}
+	return stat;
+}
+
+static irqreturn_t mvs_94xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+	void __iomem *regs = mvi->regs;
+
+	if (((stat & IRQ_SAS_A) && mvi->id == 0) ||
+			((stat & IRQ_SAS_B) && mvi->id == 1)) {
+		mw32_f(MVS_INT_STAT, CINT_DONE);
+	#ifndef MVS_USE_TASKLET
+		spin_lock(&mvi->lock);
+	#endif
+		mvs_int_full(mvi);
+	#ifndef MVS_USE_TASKLET
+		spin_unlock(&mvi->lock);
+	#endif
+	}
+	return IRQ_HANDLED;
+}
+
+static void mvs_94xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+	u32 tmp;
+	mvs_cw32(mvi, 0x300 + (slot_idx >> 3), 1 << (slot_idx % 32));
+	do {
+		tmp = mvs_cr32(mvi, 0x300 + (slot_idx >> 3));
+	} while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_94xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	if (type == PORT_TYPE_SATA) {
+		tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	}
+	mw32(MVS_INT_STAT, CINT_CI_STOP);
+	tmp = mr32(MVS_PCS) | 0xFF00;
+	mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+	u8 reg_set = *tfs;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	mvi->sata_reg_set &= ~bit(reg_set);
+	if (reg_set < 32) {
+		w_reg_set_enable(reg_set, (u32)mvi->sata_reg_set);
+		tmp = mr32(MVS_INT_STAT_SRS_0) & (u32)mvi->sata_reg_set;
+		if (tmp)
+			mw32(MVS_INT_STAT_SRS_0, tmp);
+	} else {
+		w_reg_set_enable(reg_set, mvi->sata_reg_set);
+		tmp = mr32(MVS_INT_STAT_SRS_1) & mvi->sata_reg_set;
+		if (tmp)
+			mw32(MVS_INT_STAT_SRS_1, tmp);
+	}
+
+	*tfs = MVS_ID_NOT_MAPPED;
+
+	return;
+}
+
+static u8 mvs_94xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+	int i;
+	void __iomem *regs = mvi->regs;
+
+	if (*tfs != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	i = mv_ffc64(mvi->sata_reg_set);
+	if (i > 32) {
+		mvi->sata_reg_set |= bit(i);
+		w_reg_set_enable(i, (u32)(mvi->sata_reg_set >> 32));
+		*tfs = i;
+		return 0;
+	} else if (i >= 0) {
+		mvi->sata_reg_set |= bit(i);
+		w_reg_set_enable(i, (u32)mvi->sata_reg_set);
+		*tfs = i;
+		return 0;
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+
+static void mvs_94xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct mvs_prd *buf_prd = prd;
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd++;
+	}
+}
+
+static int mvs_94xx_oob_done(struct mvs_info *mvi, int i)
+{
+	u32 phy_st;
+	phy_st = mvs_read_phy_ctl(mvi, i);
+	if (phy_st & PHY_READY_MASK)	/* phy ready */
+		return 1;
+	return 0;
+}
+
+static void mvs_94xx_get_dev_identify_frame(struct mvs_info *mvi, int port_id,
+					struct sas_identify_frame *id)
+{
+	int i;
+	u32 id_frame[7];
+
+	for (i = 0; i < 7; i++) {
+		mvs_write_port_cfg_addr(mvi, port_id,
+					CONFIG_ID_FRAME0 + i * 4);
+		id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+	}
+	memcpy(id, id_frame, 28);
+}
+
+static void mvs_94xx_get_att_identify_frame(struct mvs_info *mvi, int port_id,
+					struct sas_identify_frame *id)
+{
+	int i;
+	u32 id_frame[7];
+
+	/* mvs_hexdump(28, (u8 *)id_frame, 0); */
+	for (i = 0; i < 7; i++) {
+		mvs_write_port_cfg_addr(mvi, port_id,
+					CONFIG_ATT_ID_FRAME0 + i * 4);
+		id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+		mv_dprintk("94xx phy %d atta frame %d %x.\n",
+			port_id + mvi->id * mvi->chip->n_phy, i, id_frame[i]);
+	}
+	/* mvs_hexdump(28, (u8 *)id_frame, 0); */
+	memcpy(id, id_frame, 28);
+}
+
+static u32 mvs_94xx_make_dev_info(struct sas_identify_frame *id)
+{
+	u32 att_dev_info = 0;
+
+	att_dev_info |= id->dev_type;
+	if (id->stp_iport)
+		att_dev_info |= PORT_DEV_STP_INIT;
+	if (id->smp_iport)
+		att_dev_info |= PORT_DEV_SMP_INIT;
+	if (id->ssp_iport)
+		att_dev_info |= PORT_DEV_SSP_INIT;
+	if (id->stp_tport)
+		att_dev_info |= PORT_DEV_STP_TRGT;
+	if (id->smp_tport)
+		att_dev_info |= PORT_DEV_SMP_TRGT;
+	if (id->ssp_tport)
+		att_dev_info |= PORT_DEV_SSP_TRGT;
+
+	att_dev_info |= (u32)id->phy_id<<24;
+	return att_dev_info;
+}
+
+static u32 mvs_94xx_make_att_info(struct sas_identify_frame *id)
+{
+	return mvs_94xx_make_dev_info(id);
+}
+
+static void mvs_94xx_fix_phy_info(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	mv_dprintk("get all reg link rate is 0x%x\n", phy->phy_status);
+	sas_phy->linkrate =
+		(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+			PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+	sas_phy->linkrate += 0x8;
+	mv_dprintk("get link rate is %d\n", sas_phy->linkrate);
+	phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+	mvs_94xx_get_dev_identify_frame(mvi, i, id);
+	phy->dev_info = mvs_94xx_make_dev_info(id);
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		mvs_94xx_get_att_identify_frame(mvi, i, id);
+		phy->att_dev_info = mvs_94xx_make_att_info(id);
+		phy->att_dev_sas_addr = *(u64 *)id->sas_addr;
+	} else {
+		phy->att_dev_info = PORT_DEV_STP_TRGT | 1;
+	}
+
+}
+
+void mvs_94xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+			struct sas_phy_linkrates *rates)
+{
+	/* TODO */
+}
+
+static void mvs_94xx_clear_active_cmds(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_STP_REG_SET_0);
+	mw32(MVS_STP_REG_SET_0, 0);
+	mw32(MVS_STP_REG_SET_0, tmp);
+	tmp = mr32(MVS_STP_REG_SET_1);
+	mw32(MVS_STP_REG_SET_1, 0);
+	mw32(MVS_STP_REG_SET_1, tmp);
+}
+
+
+u32 mvs_94xx_spi_read_data(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	return mr32(SPI_RD_DATA_REG_94XX);
+}
+
+void mvs_94xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	 mw32(SPI_RD_DATA_REG_94XX, data);
+}
+
+
+int mvs_94xx_spi_buildcmd(struct mvs_info *mvi,
+				u32      *dwCmd,
+				u8       cmd,
+				u8       read,
+				u8       length,
+				u32      addr
+				)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	u32  dwTmp;
+
+	dwTmp = ((u32)cmd << 8) | ((u32)length << 4);
+	if (read)
+		dwTmp |= SPI_CTRL_READ_94XX;
+
+	if (addr != MV_MAX_U32) {
+		mw32(SPI_ADDR_REG_94XX, (addr & 0x0003FFFFL));
+		dwTmp |= SPI_ADDR_VLD_94XX;
+	}
+
+	*dwCmd = dwTmp;
+	return 0;
+}
+
+
+int mvs_94xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	mw32(SPI_CTRL_REG_94XX, cmd | SPI_CTRL_SpiStart_94XX);
+
+	return 0;
+}
+
+int mvs_94xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+	void __iomem *regs = mvi->regs_ex - 0x10200;
+	u32   i, dwTmp;
+
+	for (i = 0; i < timeout; i++) {
+		dwTmp = mr32(SPI_CTRL_REG_94XX);
+		if (!(dwTmp & SPI_CTRL_SpiStart_94XX))
+			return 0;
+		msleep(10);
+	}
+
+	return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_94xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+	int i;
+	struct mvs_prd *buf_prd = prd;
+	buf_prd += from;
+	for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+		buf_prd->addr = cpu_to_le64(buf_dma);
+		buf_prd->im_len.len = cpu_to_le32(buf_len);
+		++buf_prd;
+	}
+}
+#endif
+
+const struct mvs_dispatch mvs_94xx_dispatch = {
+	"mv94xx",
+	mvs_94xx_init,
+	NULL,
+	mvs_94xx_ioremap,
+	mvs_94xx_iounmap,
+	mvs_94xx_isr,
+	mvs_94xx_isr_status,
+	mvs_94xx_interrupt_enable,
+	mvs_94xx_interrupt_disable,
+	mvs_read_phy_ctl,
+	mvs_write_phy_ctl,
+	mvs_read_port_cfg_data,
+	mvs_write_port_cfg_data,
+	mvs_write_port_cfg_addr,
+	mvs_read_port_vsr_data,
+	mvs_write_port_vsr_data,
+	mvs_write_port_vsr_addr,
+	mvs_read_port_irq_stat,
+	mvs_write_port_irq_stat,
+	mvs_read_port_irq_mask,
+	mvs_write_port_irq_mask,
+	mvs_get_sas_addr,
+	mvs_94xx_command_active,
+	mvs_94xx_issue_stop,
+	mvs_start_delivery,
+	mvs_rx_update,
+	mvs_int_full,
+	mvs_94xx_assign_reg_set,
+	mvs_94xx_free_reg_set,
+	mvs_get_prd_size,
+	mvs_get_prd_count,
+	mvs_94xx_make_prd,
+	mvs_94xx_detect_porttype,
+	mvs_94xx_oob_done,
+	mvs_94xx_fix_phy_info,
+	NULL,
+	mvs_94xx_phy_set_link_rate,
+	mvs_hw_max_link_rate,
+	mvs_94xx_phy_disable,
+	mvs_94xx_phy_enable,
+	mvs_94xx_phy_reset,
+	NULL,
+	mvs_94xx_clear_active_cmds,
+	mvs_94xx_spi_read_data,
+	mvs_94xx_spi_write_data,
+	mvs_94xx_spi_buildcmd,
+	mvs_94xx_spi_issuecmd,
+	mvs_94xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvs_94xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
new file mode 100644
index 00000000000..23ed9b16466
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -0,0 +1,222 @@
+/*
+ * Marvell 88SE94xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS94XX_REG_H_
+#define _MVS94XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_6_0_GBPS
+
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x00,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+	MVS_STP_REG_SET_0	= 0x118, /* STP/SATA Register Set Enable */
+	MVS_STP_REG_SET_1	= 0x11C,
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+	MVS_INT_STAT_SRS_1	= 0x160,
+	MVS_INT_MASK_SRS_1	= 0x164,
+	MVS_NON_NCQ_ERR_0	= 0x168, /* SRS Non-specific NCQ Error */
+	MVS_NON_NCQ_ERR_1	= 0x16C,
+	MVS_CMD_ADDR		= 0x170, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x174, /* Command register port (data) */
+	MVS_MEM_PARITY_ERR	= 0x178, /* Memory parity error */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x180, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x184, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x1A0, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x1A4, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x1D0, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x1E0, /* port4 serial control/status */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x200, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x204, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x220, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x224, /* Port4 config data */
+
+					 /* phys 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x250, /* phy0 VSR address */
+	MVS_P0_VSR_DATA		= 0x254, /* phy0 VSR data */
+					 /* phys 1-3 follow after this */
+					 /* multiplexing */
+	MVS_P4_VSR_ADDR 	= 0x250, /* phy4 VSR address */
+	MVS_P4_VSR_DATA 	= 0x254, /* phy4 VSR data */
+	MVS_PA_VSR_ADDR		= 0x290, /* All port VSR addr */
+	MVS_PA_VSR_PORT		= 0x294, /* All port VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0x78,
+	PCR_LINK_STAT		= 0x82,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00 * 4, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01 * 4, /* phy tx */
+	VSR_PHY_MODE2		= 0x02 * 4, /* tx scc */
+	VSR_PHY_MODE3		= 0x03 * 4, /* pll */
+	VSR_PHY_MODE4		= 0x04 * 4, /* VCO */
+	VSR_PHY_MODE5		= 0x05 * 4, /* Rx */
+	VSR_PHY_MODE6		= 0x06 * 4, /* CDR */
+	VSR_PHY_MODE7		= 0x07 * 4, /* Impedance */
+	VSR_PHY_MODE8		= 0x08 * 4, /* Voltage */
+	VSR_PHY_MODE9		= 0x09 * 4, /* Test */
+	VSR_PHY_MODE10		= 0x0A * 4, /* Power */
+	VSR_PHY_MODE11		= 0x0B * 4, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C * 4, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D * 4, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+enum pci_interrupt_cause {
+	/*  MAIN_IRQ_CAUSE (R10200) Bits*/
+	IRQ_COM_IN_I2O_IOP0            = (1 << 0),
+	IRQ_COM_IN_I2O_IOP1            = (1 << 1),
+	IRQ_COM_IN_I2O_IOP2            = (1 << 2),
+	IRQ_COM_IN_I2O_IOP3            = (1 << 3),
+	IRQ_COM_OUT_I2O_HOS0           = (1 << 4),
+	IRQ_COM_OUT_I2O_HOS1           = (1 << 5),
+	IRQ_COM_OUT_I2O_HOS2           = (1 << 6),
+	IRQ_COM_OUT_I2O_HOS3           = (1 << 7),
+	IRQ_PCIF_TO_CPU_DRBL0          = (1 << 8),
+	IRQ_PCIF_TO_CPU_DRBL1          = (1 << 9),
+	IRQ_PCIF_TO_CPU_DRBL2          = (1 << 10),
+	IRQ_PCIF_TO_CPU_DRBL3          = (1 << 11),
+	IRQ_PCIF_DRBL0                 = (1 << 12),
+	IRQ_PCIF_DRBL1                 = (1 << 13),
+	IRQ_PCIF_DRBL2                 = (1 << 14),
+	IRQ_PCIF_DRBL3                 = (1 << 15),
+	IRQ_XOR_A                      = (1 << 16),
+	IRQ_XOR_B                      = (1 << 17),
+	IRQ_SAS_A                      = (1 << 18),
+	IRQ_SAS_B                      = (1 << 19),
+	IRQ_CPU_CNTRL                  = (1 << 20),
+	IRQ_GPIO                       = (1 << 21),
+	IRQ_UART                       = (1 << 22),
+	IRQ_SPI                        = (1 << 23),
+	IRQ_I2C                        = (1 << 24),
+	IRQ_SGPIO                      = (1 << 25),
+	IRQ_COM_ERR                    = (1 << 29),
+	IRQ_I2O_ERR                    = (1 << 30),
+	IRQ_PCIE_ERR                   = (1 << 31),
+};
+
+#define MAX_SG_ENTRY		255
+
+struct mvs_prd_imt {
+	__le32			len:22;
+	u8			_r_a:2;
+	u8			misc_ctl:4;
+	u8			inter_sel:4;
+};
+
+struct mvs_prd {
+	/* 64-bit buffer address */
+	__le64			addr;
+	/* 22-bit length */
+	struct mvs_prd_imt	im_len;
+} __attribute__ ((packed));
+
+#define SPI_CTRL_REG_94XX           	0xc800
+#define SPI_ADDR_REG_94XX            	0xc804
+#define SPI_WR_DATA_REG_94XX         0xc808
+#define SPI_RD_DATA_REG_94XX         	0xc80c
+#define SPI_CTRL_READ_94XX         	(1U << 2)
+#define SPI_ADDR_VLD_94XX         	(1U << 1)
+#define SPI_CTRL_SpiStart_94XX     	(1U << 0)
+
+#define mv_ffc(x)   ffz(x)
+
+static inline int
+mv_ffc64(u64 v)
+{
+	int i;
+	i = mv_ffc((u32)v);
+	if (i >= 0)
+		return i;
+	i = mv_ffc((u32)(v>>32));
+
+	if (i != 0)
+		return 32 + i;
+
+	return -1;
+}
+
+#define r_reg_set_enable(i) \
+	(((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \
+	mr32(MVS_STP_REG_SET_0))
+
+#define w_reg_set_enable(i, tmp) \
+	(((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \
+	mw32(MVS_STP_REG_SET_0, tmp))
+
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+#endif
+
diff --git a/drivers/scsi/mvsas/mv_chips.h b/drivers/scsi/mvsas/mv_chips.h
new file mode 100644
index 00000000000..a67e1c4172f
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_chips.h
@@ -0,0 +1,280 @@
+/*
+ * Marvell 88SE64xx/88SE94xx register IO interface
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#ifndef _MV_CHIPS_H_
+#define _MV_CHIPS_H_
+
+#define mr32(reg)	readl(regs + reg)
+#define mw32(reg, val)	writel((val), regs + reg)
+#define mw32_f(reg, val)	do {			\
+				mw32(reg, val);	\
+				mr32(reg);	\
+			} while (0)
+
+#define iow32(reg, val) 	outl(val, (unsigned long)(regs + reg))
+#define ior32(reg) 		inl((unsigned long)(regs + reg))
+#define iow16(reg, val) 	outw((unsigned long)(val, regs + reg))
+#define ior16(reg) 		inw((unsigned long)(regs + reg))
+#define iow8(reg, val) 		outb((unsigned long)(val, regs + reg))
+#define ior8(reg) 		inb((unsigned long)(regs + reg))
+
+static inline u32 mvs_cr32(struct mvs_info *mvi, u32 addr)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_CMD_ADDR, addr);
+	return mr32(MVS_CMD_DATA);
+}
+
+static inline void mvs_cw32(struct mvs_info *mvi, u32 addr, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_CMD_ADDR, addr);
+	mw32(MVS_CMD_DATA, val);
+}
+
+static inline u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
+{
+	void __iomem *regs = mvi->regs;
+	return (port < 4) ? mr32(MVS_P0_SER_CTLSTAT + port * 4) :
+		mr32(MVS_P4_SER_CTLSTAT + (port - 4) * 4);
+}
+
+static inline void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs;
+	if (port < 4)
+		mw32(MVS_P0_SER_CTLSTAT + port * 4, val);
+	else
+		mw32(MVS_P4_SER_CTLSTAT + (port - 4) * 4, val);
+}
+
+static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off,
+				u32 off2, u32 port)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	return (port < 4) ? readl(regs + port * 8) :
+		readl(regs2 + (port - 4) * 8);
+}
+
+static inline void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
+				u32 port, u32 val)
+{
+	void __iomem *regs = mvi->regs + off;
+	void __iomem *regs2 = mvi->regs + off2;
+	if (port < 4)
+		writel(val, regs + port * 8);
+	else
+		writel(val, regs2 + (port - 4) * 8);
+}
+
+static inline u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port);
+}
+
+static inline void mvs_write_port_cfg_data(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_DATA,
+			MVS_P4_CFG_DATA, port, val);
+}
+
+static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi,
+						u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_CFG_ADDR,
+			MVS_P4_CFG_ADDR, port, addr);
+	mdelay(10);
+}
+
+static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port);
+}
+
+static inline void mvs_write_port_vsr_data(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_DATA,
+			MVS_P4_VSR_DATA, port, val);
+}
+
+static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi,
+						u32 port, u32 addr)
+{
+	mvs_write_port(mvi, MVS_P0_VSR_ADDR,
+			MVS_P4_VSR_ADDR, port, addr);
+	mdelay(10);
+}
+
+static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port);
+}
+
+static inline void mvs_write_port_irq_stat(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_STAT,
+			MVS_P4_INT_STAT, port, val);
+}
+
+static inline u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
+{
+	return mvs_read_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port);
+
+}
+
+static inline void mvs_write_port_irq_mask(struct mvs_info *mvi,
+						u32 port, u32 val)
+{
+	mvs_write_port(mvi, MVS_P0_INT_MASK,
+			MVS_P4_INT_MASK, port, val);
+}
+
+static inline void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+	u32 tmp;
+
+	/* workaround for SATA R-ERR, to ignore phy glitch */
+	tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+	tmp &= ~(1 << 9);
+	tmp |= (1 << 10);
+	mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+
+	/* enable retry 127 times */
+	mvs_cw32(mvi, CMD_SAS_CTL1, 0x7f7f);
+
+	/* extend open frame timeout to max */
+	tmp = mvs_cr32(mvi, CMD_SAS_CTL0);
+	tmp &= ~0xffff;
+	tmp |= 0x3fff;
+	mvs_cw32(mvi, CMD_SAS_CTL0, tmp);
+
+	/* workaround for WDTIMEOUT , set to 550 ms */
+	mvs_cw32(mvi, CMD_WD_TIMER, 0x7a0000);
+
+	/* not to halt for different port op during wideport link change */
+	mvs_cw32(mvi, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+	/* workaround for Seagate disk not-found OOB sequence, recv
+	 * COMINIT before sending out COMWAKE */
+	tmp = mvs_cr32(mvi, CMD_PHY_MODE_21);
+	tmp &= 0x0000ffff;
+	tmp |= 0x00fa0000;
+	mvs_cw32(mvi, CMD_PHY_MODE_21, tmp);
+
+	tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+	tmp &= 0x1fffffff;
+	tmp |= (2U << 29);	/* 8 ms retry */
+	mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+}
+
+static inline void mvs_int_sata(struct mvs_info *mvi)
+{
+	u32 tmp;
+	void __iomem *regs = mvi->regs;
+	tmp = mr32(MVS_INT_STAT_SRS_0);
+	if (tmp)
+		mw32(MVS_INT_STAT_SRS_0, tmp);
+	MVS_CHIP_DISP->clear_active_cmds(mvi);
+}
+
+static inline void mvs_int_full(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, stat;
+	int i;
+
+	stat = mr32(MVS_INT_STAT);
+	mvs_int_rx(mvi, false);
+
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
+		if (tmp)
+			mvs_int_port(mvi, i, tmp);
+	}
+
+	if (stat & CINT_SRS)
+		mvs_int_sata(mvi);
+
+	mw32(MVS_INT_STAT, stat);
+}
+
+static inline void mvs_start_delivery(struct mvs_info *mvi, u32 tx)
+{
+	void __iomem *regs = mvi->regs;
+	mw32(MVS_TX_PROD_IDX, tx);
+}
+
+static inline u32 mvs_rx_update(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	return mr32(MVS_RX_CONS_IDX);
+}
+
+static inline u32 mvs_get_prd_size(void)
+{
+	return sizeof(struct mvs_prd);
+}
+
+static inline u32 mvs_get_prd_count(void)
+{
+	return MAX_SG_ENTRY;
+}
+
+static inline void mvs_show_pcie_usage(struct mvs_info *mvi)
+{
+	u16 link_stat, link_spd;
+	const char *spd[] = {
+		"UnKnown",
+		"2.5",
+		"5.0",
+	};
+	if (mvi->flags & MVF_FLAG_SOC || mvi->id > 0)
+		return;
+
+	pci_read_config_word(mvi->pdev, PCR_LINK_STAT, &link_stat);
+	link_spd = (link_stat & PLS_LINK_SPD) >> PLS_LINK_SPD_OFFS;
+	if (link_spd >= 3)
+		link_spd = 0;
+	dev_printk(KERN_INFO, mvi->dev,
+		"mvsas: PCI-E x%u, Bandwidth Usage: %s Gbps\n",
+	       (link_stat & PLS_NEG_LINK_WD) >> PLS_NEG_LINK_WD_OFFS,
+	       spd[link_spd]);
+}
+
+static inline u32 mvs_hw_max_link_rate(void)
+{
+	return MAX_LINK_RATE;
+}
+
+#endif  /* _MV_CHIPS_H_ */
+
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
new file mode 100644
index 00000000000..f8cb9defb96
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -0,0 +1,502 @@
+/*
+ * Marvell 88SE64xx/88SE94xx const head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_DEFS_H_
+#define _MV_DEFS_H_
+
+
+enum chip_flavors {
+	chip_6320,
+	chip_6440,
+	chip_6485,
+	chip_9480,
+	chip_9180,
+};
+
+/* driver compile-time configuration */
+enum driver_configuration {
+	MVS_SLOTS		= 512,	/* command slots */
+	MVS_TX_RING_SZ		= 1024,	/* TX ring size (12-bit) */
+	MVS_RX_RING_SZ		= 1024, /* RX ring size (12-bit) */
+					/* software requires power-of-2
+					   ring size */
+	MVS_SOC_SLOTS		= 64,
+	MVS_SOC_TX_RING_SZ	= MVS_SOC_SLOTS * 2,
+	MVS_SOC_RX_RING_SZ	= MVS_SOC_SLOTS * 2,
+
+	MVS_SLOT_BUF_SZ		= 8192, /* cmd tbl + IU + status + PRD */
+	MVS_SSP_CMD_SZ		= 64,	/* SSP command table buffer size */
+	MVS_ATA_CMD_SZ		= 96,	/* SATA command table buffer size */
+	MVS_OAF_SZ		= 64,	/* Open address frame buffer size */
+	MVS_QUEUE_SIZE	= 32,	/* Support Queue depth */
+	MVS_CAN_QUEUE		= MVS_SLOTS - 2,	/* SCSI Queue depth */
+	MVS_SOC_CAN_QUEUE	= MVS_SOC_SLOTS - 2,
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+	MVS_MAX_PHYS		= 8,	/* max. possible phys */
+	MVS_MAX_PORTS		= 8,	/* max. possible ports */
+	MVS_SOC_PHYS		= 4,	/* soc phys */
+	MVS_SOC_PORTS		= 4,	/* soc phys */
+	MVS_MAX_DEVICES	= 1024,	/* max supported device */
+};
+
+/* peripheral registers (BAR2) */
+enum peripheral_registers {
+	SPI_CTL			= 0x10,	/* EEPROM control */
+	SPI_CMD			= 0x14,	/* EEPROM command */
+	SPI_DATA		= 0x18, /* EEPROM data */
+};
+
+enum peripheral_register_bits {
+	TWSI_RDY		= (1U << 7),	/* EEPROM interface ready */
+	TWSI_RD			= (1U << 4),	/* EEPROM read access */
+
+	SPI_ADDR_MASK		= 0x3ffff,	/* bits 17:0 */
+};
+
+enum hw_register_bits {
+	/* MVS_GBL_CTL */
+	INT_EN			= (1U << 1),	/* Global int enable */
+	HBA_RST			= (1U << 0),	/* HBA reset */
+
+	/* MVS_GBL_INT_STAT */
+	INT_XOR			= (1U << 4),	/* XOR engine event */
+	INT_SAS_SATA		= (1U << 0),	/* SAS/SATA event */
+
+	/* MVS_GBL_PORT_TYPE */			/* shl for ports 1-3 */
+	SATA_TARGET		= (1U << 16),	/* port0 SATA target enable */
+	MODE_AUTO_DET_PORT7 = (1U << 15),	/* port0 SAS/SATA autodetect */
+	MODE_AUTO_DET_PORT6 = (1U << 14),
+	MODE_AUTO_DET_PORT5 = (1U << 13),
+	MODE_AUTO_DET_PORT4 = (1U << 12),
+	MODE_AUTO_DET_PORT3 = (1U << 11),
+	MODE_AUTO_DET_PORT2 = (1U << 10),
+	MODE_AUTO_DET_PORT1 = (1U << 9),
+	MODE_AUTO_DET_PORT0 = (1U << 8),
+	MODE_AUTO_DET_EN    =	MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
+				MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
+				MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
+				MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
+	MODE_SAS_PORT7_MASK = (1U << 7),  /* port0 SAS(1), SATA(0) mode */
+	MODE_SAS_PORT6_MASK = (1U << 6),
+	MODE_SAS_PORT5_MASK = (1U << 5),
+	MODE_SAS_PORT4_MASK = (1U << 4),
+	MODE_SAS_PORT3_MASK = (1U << 3),
+	MODE_SAS_PORT2_MASK = (1U << 2),
+	MODE_SAS_PORT1_MASK = (1U << 1),
+	MODE_SAS_PORT0_MASK = (1U << 0),
+	MODE_SAS_SATA	=	MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
+				MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
+				MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
+				MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
+
+				/* SAS_MODE value may be
+				 * dictated (in hw) by values
+				 * of SATA_TARGET & AUTO_DET
+				 */
+
+	/* MVS_TX_CFG */
+	TX_EN			= (1U << 16),	/* Enable TX */
+	TX_RING_SZ_MASK		= 0xfff,	/* TX ring size, bits 11:0 */
+
+	/* MVS_RX_CFG */
+	RX_EN			= (1U << 16),	/* Enable RX */
+	RX_RING_SZ_MASK		= 0xfff,	/* RX ring size, bits 11:0 */
+
+	/* MVS_INT_COAL */
+	COAL_EN			= (1U << 16),	/* Enable int coalescing */
+
+	/* MVS_INT_STAT, MVS_INT_MASK */
+	CINT_I2C		= (1U << 31),	/* I2C event */
+	CINT_SW0		= (1U << 30),	/* software event 0 */
+	CINT_SW1		= (1U << 29),	/* software event 1 */
+	CINT_PRD_BC		= (1U << 28),	/* PRD BC err for read cmd */
+	CINT_DMA_PCIE		= (1U << 27),	/* DMA to PCIE timeout */
+	CINT_MEM		= (1U << 26),	/* int mem parity err */
+	CINT_I2C_SLAVE		= (1U << 25),	/* slave I2C event */
+	CINT_SRS		= (1U << 3),	/* SRS event */
+	CINT_CI_STOP		= (1U << 1),	/* cmd issue stopped */
+	CINT_DONE		= (1U << 0),	/* cmd completion */
+
+						/* shl for ports 1-3 */
+	CINT_PORT_STOPPED	= (1U << 16),	/* port0 stopped */
+	CINT_PORT		= (1U << 8),	/* port0 event */
+	CINT_PORT_MASK_OFFSET	= 8,
+	CINT_PORT_MASK		= (0xFF << CINT_PORT_MASK_OFFSET),
+	CINT_PHY_MASK_OFFSET	= 4,
+	CINT_PHY_MASK		= (0x0F << CINT_PHY_MASK_OFFSET),
+
+	/* TX (delivery) ring bits */
+	TXQ_CMD_SHIFT		= 29,
+	TXQ_CMD_SSP		= 1,		/* SSP protocol */
+	TXQ_CMD_SMP		= 2,		/* SMP protocol */
+	TXQ_CMD_STP		= 3,		/* STP/SATA protocol */
+	TXQ_CMD_SSP_FREE_LIST	= 4,		/* add to SSP targ free list */
+	TXQ_CMD_SLOT_RESET	= 7,		/* reset command slot */
+	TXQ_MODE_I		= (1U << 28),	/* mode: 0=target,1=initiator */
+	TXQ_MODE_TARGET 	= 0,
+	TXQ_MODE_INITIATOR	= 1,
+	TXQ_PRIO_HI		= (1U << 27),	/* priority: 0=normal, 1=high */
+	TXQ_PRI_NORMAL		= 0,
+	TXQ_PRI_HIGH		= 1,
+	TXQ_SRS_SHIFT		= 20,		/* SATA register set */
+	TXQ_SRS_MASK		= 0x7f,
+	TXQ_PHY_SHIFT		= 12,		/* PHY bitmap */
+	TXQ_PHY_MASK		= 0xff,
+	TXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* RX (completion) ring bits */
+	RXQ_GOOD		= (1U << 23),	/* Response good */
+	RXQ_SLOT_RESET		= (1U << 21),	/* Slot reset complete */
+	RXQ_CMD_RX		= (1U << 20),	/* target cmd received */
+	RXQ_ATTN		= (1U << 19),	/* attention */
+	RXQ_RSP			= (1U << 18),	/* response frame xfer'd */
+	RXQ_ERR			= (1U << 17),	/* err info rec xfer'd */
+	RXQ_DONE		= (1U << 16),	/* cmd complete */
+	RXQ_SLOT_MASK		= 0xfff,	/* slot number */
+
+	/* mvs_cmd_hdr bits */
+	MCH_PRD_LEN_SHIFT	= 16,		/* 16-bit PRD table len */
+	MCH_SSP_FR_TYPE_SHIFT	= 13,		/* SSP frame type */
+
+						/* SSP initiator only */
+	MCH_SSP_FR_CMD		= 0x0,		/* COMMAND frame */
+
+						/* SSP initiator or target */
+	MCH_SSP_FR_TASK		= 0x1,		/* TASK frame */
+
+						/* SSP target only */
+	MCH_SSP_FR_XFER_RDY	= 0x4,		/* XFER_RDY frame */
+	MCH_SSP_FR_RESP		= 0x5,		/* RESPONSE frame */
+	MCH_SSP_FR_READ		= 0x6,		/* Read DATA frame(s) */
+	MCH_SSP_FR_READ_RESP	= 0x7,		/* ditto, plus RESPONSE */
+
+	MCH_SSP_MODE_PASSTHRU	= 1,
+	MCH_SSP_MODE_NORMAL	= 0,
+	MCH_PASSTHRU		= (1U << 12),	/* pass-through (SSP) */
+	MCH_FBURST		= (1U << 11),	/* first burst (SSP) */
+	MCH_CHK_LEN		= (1U << 10),	/* chk xfer len (SSP) */
+	MCH_RETRY		= (1U << 9),	/* tport layer retry (SSP) */
+	MCH_PROTECTION		= (1U << 8),	/* protection info rec (SSP) */
+	MCH_RESET		= (1U << 7),	/* Reset (STP/SATA) */
+	MCH_FPDMA		= (1U << 6),	/* First party DMA (STP/SATA) */
+	MCH_ATAPI		= (1U << 5),	/* ATAPI (STP/SATA) */
+	MCH_BIST		= (1U << 4),	/* BIST activate (STP/SATA) */
+	MCH_PMP_MASK		= 0xf,		/* PMP from cmd FIS (STP/SATA)*/
+
+	CCTL_RST		= (1U << 5),	/* port logic reset */
+
+						/* 0(LSB first), 1(MSB first) */
+	CCTL_ENDIAN_DATA	= (1U << 3),	/* PRD data */
+	CCTL_ENDIAN_RSP		= (1U << 2),	/* response frame */
+	CCTL_ENDIAN_OPEN	= (1U << 1),	/* open address frame */
+	CCTL_ENDIAN_CMD		= (1U << 0),	/* command table */
+
+	/* MVS_Px_SER_CTLSTAT (per-phy control) */
+	PHY_SSP_RST		= (1U << 3),	/* reset SSP link layer */
+	PHY_BCAST_CHG		= (1U << 2),	/* broadcast(change) notif */
+	PHY_RST_HARD		= (1U << 1),	/* hard reset + phy reset */
+	PHY_RST			= (1U << 0),	/* phy reset */
+	PHY_READY_MASK		= (1U << 20),
+
+	/* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+	PHYEV_DEC_ERR		= (1U << 24),	/* Phy Decoding Error */
+	PHYEV_DCDR_ERR		= (1U << 23),	/* STP Deocder Error */
+	PHYEV_CRC_ERR		= (1U << 22),	/* STP CRC Error */
+	PHYEV_UNASSOC_FIS	= (1U << 19),	/* unassociated FIS rx'd */
+	PHYEV_AN		= (1U << 18),	/* SATA async notification */
+	PHYEV_BIST_ACT		= (1U << 17),	/* BIST activate FIS */
+	PHYEV_SIG_FIS		= (1U << 16),	/* signature FIS */
+	PHYEV_POOF		= (1U << 12),	/* phy ready from 1 -> 0 */
+	PHYEV_IU_BIG		= (1U << 11),	/* IU too long err */
+	PHYEV_IU_SMALL		= (1U << 10),	/* IU too short err */
+	PHYEV_UNK_TAG		= (1U << 9),	/* unknown tag */
+	PHYEV_BROAD_CH		= (1U << 8),	/* broadcast(CHANGE) */
+	PHYEV_COMWAKE		= (1U << 7),	/* COMWAKE rx'd */
+	PHYEV_PORT_SEL		= (1U << 6),	/* port selector present */
+	PHYEV_HARD_RST		= (1U << 5),	/* hard reset rx'd */
+	PHYEV_ID_TMOUT		= (1U << 4),	/* identify timeout */
+	PHYEV_ID_FAIL		= (1U << 3),	/* identify failed */
+	PHYEV_ID_DONE		= (1U << 2),	/* identify done */
+	PHYEV_HARD_RST_DONE	= (1U << 1),	/* hard reset done */
+	PHYEV_RDY_CH		= (1U << 0),	/* phy ready changed state */
+
+	/* MVS_PCS */
+	PCS_EN_SATA_REG_SHIFT	= (16),		/* Enable SATA Register Set */
+	PCS_EN_PORT_XMT_SHIFT	= (12),		/* Enable Port Transmit */
+	PCS_EN_PORT_XMT_SHIFT2	= (8),		/* For 6485 */
+	PCS_SATA_RETRY		= (1U << 8),	/* retry ctl FIS on R_ERR */
+	PCS_RSP_RX_EN		= (1U << 7),	/* raw response rx */
+	PCS_SATA_RETRY_2	= (1U << 6),	/* For 9180 */
+	PCS_SELF_CLEAR		= (1U << 5),	/* self-clearing int mode */
+	PCS_FIS_RX_EN		= (1U << 4),	/* FIS rx enable */
+	PCS_CMD_STOP_ERR	= (1U << 3),	/* cmd stop-on-err enable */
+	PCS_CMD_RST		= (1U << 1),	/* reset cmd issue */
+	PCS_CMD_EN		= (1U << 0),	/* enable cmd issue */
+
+	/* Port n Attached Device Info */
+	PORT_DEV_SSP_TRGT	= (1U << 19),
+	PORT_DEV_SMP_TRGT	= (1U << 18),
+	PORT_DEV_STP_TRGT	= (1U << 17),
+	PORT_DEV_SSP_INIT	= (1U << 11),
+	PORT_DEV_SMP_INIT	= (1U << 10),
+	PORT_DEV_STP_INIT	= (1U << 9),
+	PORT_PHY_ID_MASK	= (0xFFU << 24),
+	PORT_SSP_TRGT_MASK	= (0x1U << 19),
+	PORT_SSP_INIT_MASK	= (0x1U << 11),
+	PORT_DEV_TRGT_MASK	= (0x7U << 17),
+	PORT_DEV_INIT_MASK	= (0x7U << 9),
+	PORT_DEV_TYPE_MASK	= (0x7U << 0),
+
+	/* Port n PHY Status */
+	PHY_RDY			= (1U << 2),
+	PHY_DW_SYNC		= (1U << 1),
+	PHY_OOB_DTCTD		= (1U << 0),
+
+	/* VSR */
+	/* PHYMODE 6 (CDB) */
+	PHY_MODE6_LATECLK	= (1U << 29),	/* Lock Clock */
+	PHY_MODE6_DTL_SPEED	= (1U << 27),	/* Digital Loop Speed */
+	PHY_MODE6_FC_ORDER	= (1U << 26),	/* Fibre Channel Mode Order*/
+	PHY_MODE6_MUCNT_EN	= (1U << 24),	/* u Count Enable */
+	PHY_MODE6_SEL_MUCNT_LEN	= (1U << 22),	/* Training Length Select */
+	PHY_MODE6_SELMUPI	= (1U << 20),	/* Phase Multi Select (init) */
+	PHY_MODE6_SELMUPF	= (1U << 18),	/* Phase Multi Select (final) */
+	PHY_MODE6_SELMUFF	= (1U << 16),	/* Freq Loop Multi Sel(final) */
+	PHY_MODE6_SELMUFI	= (1U << 14),	/* Freq Loop Multi Sel(init) */
+	PHY_MODE6_FREEZE_LOOP	= (1U << 12),	/* Freeze Rx CDR Loop */
+	PHY_MODE6_INT_RXFOFFS	= (1U << 3),	/* Rx CDR Freq Loop Enable */
+	PHY_MODE6_FRC_RXFOFFS	= (1U << 2),	/* Initial Rx CDR Offset */
+	PHY_MODE6_STAU_0D8	= (1U << 1),	/* Rx CDR Freq Loop Saturate */
+	PHY_MODE6_RXSAT_DIS	= (1U << 0),	/* Saturate Ctl */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+	PHYR_IDENTIFY		= 0x00,	/* info for IDENTIFY frame */
+	PHYR_ADDR_LO		= 0x04,	/* my SAS address (low) */
+	PHYR_ADDR_HI		= 0x08,	/* my SAS address (high) */
+	PHYR_ATT_DEV_INFO	= 0x0C,	/* attached device info */
+	PHYR_ATT_ADDR_LO	= 0x10,	/* attached dev SAS addr (low) */
+	PHYR_ATT_ADDR_HI	= 0x14,	/* attached dev SAS addr (high) */
+	PHYR_SATA_CTL		= 0x18,	/* SATA control */
+	PHYR_PHY_STAT		= 0x1C,	/* PHY status */
+	PHYR_SATA_SIG0	= 0x20,	/*port SATA signature FIS(Byte 0-3) */
+	PHYR_SATA_SIG1	= 0x24,	/*port SATA signature FIS(Byte 4-7) */
+	PHYR_SATA_SIG2	= 0x28,	/*port SATA signature FIS(Byte 8-11) */
+	PHYR_SATA_SIG3	= 0x2c,	/*port SATA signature FIS(Byte 12-15) */
+	PHYR_R_ERR_COUNT	= 0x30, /* port R_ERR count register */
+	PHYR_CRC_ERR_COUNT	= 0x34, /* port CRC error count register */
+	PHYR_WIDE_PORT	= 0x38,	/* wide port participating */
+	PHYR_CURRENT0		= 0x80,	/* current connection info 0 */
+	PHYR_CURRENT1		= 0x84,	/* current connection info 1 */
+	PHYR_CURRENT2		= 0x88,	/* current connection info 2 */
+	CONFIG_ID_FRAME0       = 0x100, /* Port device ID frame register 0 */
+	CONFIG_ID_FRAME1       = 0x104, /* Port device ID frame register 1 */
+	CONFIG_ID_FRAME2       = 0x108, /* Port device ID frame register 2 */
+	CONFIG_ID_FRAME3       = 0x10c, /* Port device ID frame register 3 */
+	CONFIG_ID_FRAME4       = 0x110, /* Port device ID frame register 4 */
+	CONFIG_ID_FRAME5       = 0x114, /* Port device ID frame register 5 */
+	CONFIG_ID_FRAME6       = 0x118, /* Port device ID frame register 6 */
+	CONFIG_ATT_ID_FRAME0   = 0x11c, /* attached ID frame register 0 */
+	CONFIG_ATT_ID_FRAME1   = 0x120, /* attached ID frame register 1 */
+	CONFIG_ATT_ID_FRAME2   = 0x124, /* attached ID frame register 2 */
+	CONFIG_ATT_ID_FRAME3   = 0x128, /* attached ID frame register 3 */
+	CONFIG_ATT_ID_FRAME4   = 0x12c, /* attached ID frame register 4 */
+	CONFIG_ATT_ID_FRAME5   = 0x130, /* attached ID frame register 5 */
+	CONFIG_ATT_ID_FRAME6   = 0x134, /* attached ID frame register 6 */
+};
+
+enum sas_cmd_port_registers {
+	CMD_CMRST_OOB_DET	= 0x100, /* COMRESET OOB detect register */
+	CMD_CMWK_OOB_DET	= 0x104, /* COMWAKE OOB detect register */
+	CMD_CMSAS_OOB_DET	= 0x108, /* COMSAS OOB detect register */
+	CMD_BRST_OOB_DET	= 0x10c, /* burst OOB detect register */
+	CMD_OOB_SPACE	= 0x110, /* OOB space control register */
+	CMD_OOB_BURST	= 0x114, /* OOB burst control register */
+	CMD_PHY_TIMER		= 0x118, /* PHY timer control register */
+	CMD_PHY_CONFIG0	= 0x11c, /* PHY config register 0 */
+	CMD_PHY_CONFIG1	= 0x120, /* PHY config register 1 */
+	CMD_SAS_CTL0		= 0x124, /* SAS control register 0 */
+	CMD_SAS_CTL1		= 0x128, /* SAS control register 1 */
+	CMD_SAS_CTL2		= 0x12c, /* SAS control register 2 */
+	CMD_SAS_CTL3		= 0x130, /* SAS control register 3 */
+	CMD_ID_TEST		= 0x134, /* ID test register */
+	CMD_PL_TIMER		= 0x138, /* PL timer register */
+	CMD_WD_TIMER		= 0x13c, /* WD timer register */
+	CMD_PORT_SEL_COUNT	= 0x140, /* port selector count register */
+	CMD_APP_MEM_CTL	= 0x144, /* Application Memory Control */
+	CMD_XOR_MEM_CTL	= 0x148, /* XOR Block Memory Control */
+	CMD_DMA_MEM_CTL	= 0x14c, /* DMA Block Memory Control */
+	CMD_PORT_MEM_CTL0	= 0x150, /* Port Memory Control 0 */
+	CMD_PORT_MEM_CTL1	= 0x154, /* Port Memory Control 1 */
+	CMD_SATA_PORT_MEM_CTL0	= 0x158, /* SATA Port Memory Control 0 */
+	CMD_SATA_PORT_MEM_CTL1	= 0x15c, /* SATA Port Memory Control 1 */
+	CMD_XOR_MEM_BIST_CTL	= 0x160, /* XOR Memory BIST Control */
+	CMD_XOR_MEM_BIST_STAT	= 0x164, /* XOR Memroy BIST Status */
+	CMD_DMA_MEM_BIST_CTL	= 0x168, /* DMA Memory BIST Control */
+	CMD_DMA_MEM_BIST_STAT	= 0x16c, /* DMA Memory BIST Status */
+	CMD_PORT_MEM_BIST_CTL	= 0x170, /* Port Memory BIST Control */
+	CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+	CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+	CMD_STP_MEM_BIST_CTL	= 0x17c, /* STP Memory BIST Control */
+	CMD_STP_MEM_BIST_STAT0	= 0x180, /* STP Memory BIST Status 0 */
+	CMD_STP_MEM_BIST_STAT1	= 0x184, /* STP Memory BIST Status 1 */
+	CMD_RESET_COUNT		= 0x188, /* Reset Count */
+	CMD_MONTR_DATA_SEL	= 0x18C, /* Monitor Data/Select */
+	CMD_PLL_PHY_CONFIG	= 0x190, /* PLL/PHY Configuration */
+	CMD_PHY_CTL		= 0x194, /* PHY Control and Status */
+	CMD_PHY_TEST_COUNT0	= 0x198, /* Phy Test Count 0 */
+	CMD_PHY_TEST_COUNT1	= 0x19C, /* Phy Test Count 1 */
+	CMD_PHY_TEST_COUNT2	= 0x1A0, /* Phy Test Count 2 */
+	CMD_APP_ERR_CONFIG	= 0x1A4, /* Application Error Configuration */
+	CMD_PND_FIFO_CTL0	= 0x1A8, /* Pending FIFO Control 0 */
+	CMD_HOST_CTL		= 0x1AC, /* Host Control Status */
+	CMD_HOST_WR_DATA	= 0x1B0, /* Host Write Data */
+	CMD_HOST_RD_DATA	= 0x1B4, /* Host Read Data */
+	CMD_PHY_MODE_21		= 0x1B8, /* Phy Mode 21 */
+	CMD_SL_MODE0		= 0x1BC, /* SL Mode 0 */
+	CMD_SL_MODE1		= 0x1C0, /* SL Mode 1 */
+	CMD_PND_FIFO_CTL1	= 0x1C4, /* Pending FIFO Control 1 */
+};
+
+enum mvs_info_flags {
+	MVF_MSI		= (1U << 0),	/* MSI is enabled */
+	MVF_PHY_PWR_FIX	= (1U << 1),	/* bug workaround */
+	MVF_FLAG_SOC		= (1U << 2),	/* SoC integrated controllers */
+};
+
+enum mvs_event_flags {
+	PHY_PLUG_EVENT	= (3U),
+	PHY_PLUG_IN		= (1U << 0),	/* phy plug in */
+	PHY_PLUG_OUT		= (1U << 1),	/* phy plug out */
+};
+
+enum mvs_port_type {
+	PORT_TGT_MASK	=  (1U << 5),
+	PORT_INIT_PORT	=  (1U << 4),
+	PORT_TGT_PORT	=  (1U << 3),
+	PORT_INIT_TGT_PORT = (PORT_INIT_PORT | PORT_TGT_PORT),
+	PORT_TYPE_SAS	=  (1U << 1),
+	PORT_TYPE_SATA	=  (1U << 0),
+};
+
+/* Command Table Format */
+enum ct_format {
+	/* SSP */
+	SSP_F_H		=  0x00,
+	SSP_F_IU	=  0x18,
+	SSP_F_MAX	=  0x4D,
+	/* STP */
+	STP_CMD_FIS	=  0x00,
+	STP_ATAPI_CMD	=  0x40,
+	STP_F_MAX	=  0x10,
+	/* SMP */
+	SMP_F_T		=  0x00,
+	SMP_F_DEP	=  0x01,
+	SMP_F_MAX	=  0x101,
+};
+
+enum status_buffer {
+	SB_EIR_OFF	=  0x00,	/* Error Information Record */
+	SB_RFB_OFF	=  0x08,	/* Response Frame Buffer */
+	SB_RFB_MAX	=  0x400,	/* RFB size*/
+};
+
+enum error_info_rec {
+	CMD_ISS_STPD	= (1U << 31),	/* Cmd Issue Stopped */
+	CMD_PI_ERR	= (1U << 30),	/* Protection info error.  see flags2 */
+	RSP_OVER	= (1U << 29),	/* rsp buffer overflow */
+	RETRY_LIM	= (1U << 28),	/* FIS/frame retry limit exceeded */
+	UNK_FIS 	= (1U << 27),	/* unknown FIS */
+	DMA_TERM	= (1U << 26),	/* DMA terminate primitive rx'd */
+	SYNC_ERR	= (1U << 25),	/* SYNC rx'd during frame xmit */
+	TFILE_ERR	= (1U << 24),	/* SATA taskfile Error bit set */
+	R_ERR		= (1U << 23),	/* SATA returned R_ERR prim */
+	RD_OFS		= (1U << 20),	/* Read DATA frame invalid offset */
+	XFER_RDY_OFS	= (1U << 19),	/* XFER_RDY offset error */
+	UNEXP_XFER_RDY	= (1U << 18),	/* unexpected XFER_RDY error */
+	DATA_OVER_UNDER = (1U << 16),	/* data overflow/underflow */
+	INTERLOCK	= (1U << 15),	/* interlock error */
+	NAK		= (1U << 14),	/* NAK rx'd */
+	ACK_NAK_TO	= (1U << 13),	/* ACK/NAK timeout */
+	CXN_CLOSED	= (1U << 12),	/* cxn closed w/out ack/nak */
+	OPEN_TO 	= (1U << 11),	/* I_T nexus lost, open cxn timeout */
+	PATH_BLOCKED	= (1U << 10),	/* I_T nexus lost, pathway blocked */
+	NO_DEST 	= (1U << 9),	/* I_T nexus lost, no destination */
+	STP_RES_BSY	= (1U << 8),	/* STP resources busy */
+	BREAK		= (1U << 7),	/* break received */
+	BAD_DEST	= (1U << 6),	/* bad destination */
+	BAD_PROTO	= (1U << 5),	/* protocol not supported */
+	BAD_RATE	= (1U << 4),	/* cxn rate not supported */
+	WRONG_DEST	= (1U << 3),	/* wrong destination error */
+	CREDIT_TO	= (1U << 2),	/* credit timeout */
+	WDOG_TO 	= (1U << 1),	/* watchdog timeout */
+	BUF_PAR 	= (1U << 0),	/* buffer parity error */
+};
+
+enum error_info_rec_2 {
+	SLOT_BSY_ERR	= (1U << 31),	/* Slot Busy Error */
+	GRD_CHK_ERR	= (1U << 14),	/* Guard Check Error */
+	APP_CHK_ERR	= (1U << 13),	/* Application Check error */
+	REF_CHK_ERR	= (1U << 12),	/* Reference Check Error */
+	USR_BLK_NM	= (1U << 0),	/* User Block Number */
+};
+
+enum pci_cfg_register_bits {
+	PCTL_PWR_OFF	= (0xFU << 24),
+	PCTL_COM_ON	= (0xFU << 20),
+	PCTL_LINK_RST	= (0xFU << 16),
+	PCTL_LINK_OFFS	= (16),
+	PCTL_PHY_DSBL	= (0xFU << 12),
+	PCTL_PHY_DSBL_OFFS	= (12),
+	PRD_REQ_SIZE	= (0x4000),
+	PRD_REQ_MASK	= (0x00007000),
+	PLS_NEG_LINK_WD		= (0x3FU << 4),
+	PLS_NEG_LINK_WD_OFFS	= 4,
+	PLS_LINK_SPD		= (0x0FU << 0),
+	PLS_LINK_SPD_OFFS	= 0,
+};
+
+enum open_frame_protocol {
+	PROTOCOL_SMP	= 0x0,
+	PROTOCOL_SSP	= 0x1,
+	PROTOCOL_STP	= 0x2,
+};
+
+/* define for response frame datapres field */
+enum datapres_field {
+	NO_DATA		= 0,
+	RESPONSE_DATA	= 1,
+	SENSE_DATA	= 2,
+};
+
+/* define task management IU */
+struct mvs_tmf_task{
+	u8 tmf;
+	u16 tag_of_task_to_be_managed;
+};
+#endif
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
new file mode 100644
index 00000000000..8646a19f999
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -0,0 +1,703 @@
+/*
+ * Marvell 88SE64xx/88SE94xx pci init
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#include "mv_sas.h"
+
+static struct scsi_transport_template *mvs_stt;
+static const struct mvs_chip_info mvs_chips[] = {
+	[chip_6320] =	{ 1, 2, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_6440] =	{ 1, 4, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
+	[chip_6485] =	{ 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
+	[chip_9180] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+	[chip_9480] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+};
+
+#define SOC_SAS_NUM 2
+
+static struct scsi_host_template mvs_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= mvs_slave_configure,
+	.slave_destroy		= sas_slave_destroy,
+	.scan_finished		= mvs_scan_finished,
+	.scan_start		= mvs_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.change_queue_type	= sas_change_queue_type,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.cmd_per_lun		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler	= sas_eh_device_reset_handler,
+	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
+	.slave_alloc		= mvs_slave_alloc,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+};
+
+static struct sas_domain_function_template mvs_transport_ops = {
+	.lldd_dev_found 	= mvs_dev_found,
+	.lldd_dev_gone	= mvs_dev_gone,
+
+	.lldd_execute_task	= mvs_queue_command,
+	.lldd_control_phy	= mvs_phy_control,
+
+	.lldd_abort_task	= mvs_abort_task,
+	.lldd_abort_task_set    = mvs_abort_task_set,
+	.lldd_clear_aca         = mvs_clear_aca,
+       .lldd_clear_task_set    = mvs_clear_task_set,
+	.lldd_I_T_nexus_reset	= mvs_I_T_nexus_reset,
+	.lldd_lu_reset 		= mvs_lu_reset,
+	.lldd_query_task	= mvs_query_task,
+
+	.lldd_port_formed	= mvs_port_formed,
+	.lldd_port_deformed     = mvs_port_deformed,
+
+};
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+	struct mvs_phy *phy = &mvi->phy[phy_id];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	phy->mvi = mvi;
+	init_timer(&phy->timer);
+	sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+	sas_phy->class = SAS;
+	sas_phy->iproto = SAS_PROTOCOL_ALL;
+	sas_phy->tproto = 0;
+	sas_phy->type = PHY_TYPE_PHYSICAL;
+	sas_phy->role = PHY_ROLE_INITIATOR;
+	sas_phy->oob_mode = OOB_NOT_CONNECTED;
+	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+	sas_phy->id = phy_id;
+	sas_phy->sas_addr = &mvi->sas_addr[0];
+	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+	sas_phy->ha = (struct sas_ha_struct *)mvi->shost->hostdata;
+	sas_phy->lldd_phy = phy;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+	int i;
+	struct mvs_wq *mwq;
+	int slot_nr;
+
+	if (!mvi)
+		return;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		slot_nr = MVS_SOC_SLOTS;
+	else
+		slot_nr = MVS_SLOTS;
+
+	for (i = 0; i < mvi->tags_num; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+		if (slot->buf)
+			dma_free_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+					  slot->buf, slot->buf_dma);
+	}
+
+	if (mvi->tx)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				  mvi->tx, mvi->tx_dma);
+	if (mvi->rx_fis)
+		dma_free_coherent(mvi->dev, MVS_RX_FISL_SZ,
+				  mvi->rx_fis, mvi->rx_fis_dma);
+	if (mvi->rx)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				  mvi->rx, mvi->rx_dma);
+	if (mvi->slot)
+		dma_free_coherent(mvi->dev,
+				  sizeof(*mvi->slot) * slot_nr,
+				  mvi->slot, mvi->slot_dma);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (mvi->bulk_buffer)
+		dma_free_coherent(mvi->dev, TRASH_BUCKET_SIZE,
+				  mvi->bulk_buffer, mvi->bulk_buffer_dma);
+#endif
+
+	MVS_CHIP_DISP->chip_iounmap(mvi);
+	if (mvi->shost)
+		scsi_host_put(mvi->shost);
+	list_for_each_entry(mwq, &mvi->wq_list, entry)
+		cancel_delayed_work(&mwq->work_q);
+	kfree(mvi);
+}
+
+#ifdef MVS_USE_TASKLET
+struct tasklet_struct	mv_tasklet;
+static void mvs_tasklet(unsigned long opaque)
+{
+	unsigned long flags;
+	u32 stat;
+	u16 core_nr, i = 0;
+
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = (struct sas_ha_struct *)opaque;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+	if (unlikely(!mvi))
+		BUG_ON(1);
+
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		stat = MVS_CHIP_DISP->isr_status(mvi, mvi->irq);
+		if (stat)
+			MVS_CHIP_DISP->isr(mvi, mvi->irq, stat);
+	}
+
+}
+#endif
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque)
+{
+	u32 core_nr, i = 0;
+	u32 stat;
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = opaque;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+	if (unlikely(!mvi))
+		return IRQ_NONE;
+
+	stat = MVS_CHIP_DISP->isr_status(mvi, irq);
+	if (!stat)
+		return IRQ_NONE;
+
+#ifdef MVS_USE_TASKLET
+	tasklet_schedule(&mv_tasklet);
+#else
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		MVS_CHIP_DISP->isr(mvi, irq, stat);
+	}
+#endif
+	return IRQ_HANDLED;
+}
+
+static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
+{
+	int i, slot_nr;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		slot_nr = MVS_SOC_SLOTS;
+	else
+		slot_nr = MVS_SLOTS;
+
+	spin_lock_init(&mvi->lock);
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvs_phy_init(mvi, i);
+		mvi->port[i].wide_port_phymap = 0;
+		mvi->port[i].port_attached = 0;
+		INIT_LIST_HEAD(&mvi->port[i].list);
+	}
+	for (i = 0; i < MVS_MAX_DEVICES; i++) {
+		mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED;
+		mvi->devices[i].dev_type = NO_DEVICE;
+		mvi->devices[i].device_id = i;
+		mvi->devices[i].dev_status = MVS_DEV_NORMAL;
+	}
+
+	/*
+	 * alloc and init our DMA areas
+	 */
+	mvi->tx = dma_alloc_coherent(mvi->dev,
+				     sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+				     &mvi->tx_dma, GFP_KERNEL);
+	if (!mvi->tx)
+		goto err_out;
+	memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
+	mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
+					 &mvi->rx_fis_dma, GFP_KERNEL);
+	if (!mvi->rx_fis)
+		goto err_out;
+	memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+	mvi->rx = dma_alloc_coherent(mvi->dev,
+				     sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+				     &mvi->rx_dma, GFP_KERNEL);
+	if (!mvi->rx)
+		goto err_out;
+	memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
+	mvi->rx[0] = cpu_to_le32(0xfff);
+	mvi->rx_cons = 0xfff;
+
+	mvi->slot = dma_alloc_coherent(mvi->dev,
+				       sizeof(*mvi->slot) * slot_nr,
+				       &mvi->slot_dma, GFP_KERNEL);
+	if (!mvi->slot)
+		goto err_out;
+	memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	mvi->bulk_buffer = dma_alloc_coherent(mvi->dev,
+				       TRASH_BUCKET_SIZE,
+				       &mvi->bulk_buffer_dma, GFP_KERNEL);
+	if (!mvi->bulk_buffer)
+		goto err_out;
+#endif
+	for (i = 0; i < slot_nr; i++) {
+		struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+		slot->buf = dma_alloc_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+					       &slot->buf_dma, GFP_KERNEL);
+		if (!slot->buf) {
+			printk(KERN_DEBUG"failed to allocate slot->buf.\n");
+			goto err_out;
+		}
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+		++mvi->tags_num;
+	}
+	/* Initialize tags */
+	mvs_tag_init(mvi);
+	return 0;
+err_out:
+	return 1;
+}
+
+
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex)
+{
+	unsigned long res_start, res_len, res_flag, res_flag_ex = 0;
+	struct pci_dev *pdev = mvi->pdev;
+	if (bar_ex != -1) {
+		/*
+		 * ioremap main and peripheral registers
+		 */
+		res_start = pci_resource_start(pdev, bar_ex);
+		res_len = pci_resource_len(pdev, bar_ex);
+		if (!res_start || !res_len)
+			goto err_out;
+
+		res_flag_ex = pci_resource_flags(pdev, bar_ex);
+		if (res_flag_ex & IORESOURCE_MEM) {
+			if (res_flag_ex & IORESOURCE_CACHEABLE)
+				mvi->regs_ex = ioremap(res_start, res_len);
+			else
+				mvi->regs_ex = ioremap_nocache(res_start,
+						res_len);
+		} else
+			mvi->regs_ex = (void *)res_start;
+		if (!mvi->regs_ex)
+			goto err_out;
+	}
+
+	res_start = pci_resource_start(pdev, bar);
+	res_len = pci_resource_len(pdev, bar);
+	if (!res_start || !res_len)
+		goto err_out;
+
+	res_flag = pci_resource_flags(pdev, bar);
+	if (res_flag & IORESOURCE_CACHEABLE)
+		mvi->regs = ioremap(res_start, res_len);
+	else
+		mvi->regs = ioremap_nocache(res_start, res_len);
+
+	if (!mvi->regs) {
+		if (mvi->regs_ex && (res_flag_ex & IORESOURCE_MEM))
+			iounmap(mvi->regs_ex);
+		mvi->regs_ex = NULL;
+		goto err_out;
+	}
+
+	return 0;
+err_out:
+	return -1;
+}
+
+void mvs_iounmap(void __iomem *regs)
+{
+	iounmap(regs);
+}
+
+static struct mvs_info *__devinit mvs_pci_alloc(struct pci_dev *pdev,
+				const struct pci_device_id *ent,
+				struct Scsi_Host *shost, unsigned int id)
+{
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	mvi = kzalloc(sizeof(*mvi) + MVS_SLOTS * sizeof(struct mvs_slot_info),
+			GFP_KERNEL);
+	if (!mvi)
+		return NULL;
+
+	mvi->pdev = pdev;
+	mvi->dev = &pdev->dev;
+	mvi->chip_id = ent->driver_data;
+	mvi->chip = &mvs_chips[mvi->chip_id];
+	INIT_LIST_HEAD(&mvi->wq_list);
+	mvi->irq = pdev->irq;
+
+	((struct mvs_prv_info *)sha->lldd_ha)->mvi[id] = mvi;
+	((struct mvs_prv_info *)sha->lldd_ha)->n_phy = mvi->chip->n_phy;
+
+	mvi->id = id;
+	mvi->sas = sha;
+	mvi->shost = shost;
+#ifdef MVS_USE_TASKLET
+	tasklet_init(&mv_tasklet, mvs_tasklet, (unsigned long)sha);
+#endif
+
+	if (MVS_CHIP_DISP->chip_ioremap(mvi))
+		goto err_out;
+	if (!mvs_alloc(mvi, shost))
+		return mvi;
+err_out:
+	mvs_free(mvi);
+	return NULL;
+}
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
+static int __devinit mvs_prep_sas_ha_init(struct Scsi_Host *shost,
+				const struct mvs_chip_info *chip_info)
+{
+	int phy_nr, port_nr; unsigned short core_nr;
+	struct asd_sas_phy **arr_phy;
+	struct asd_sas_port **arr_port;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	core_nr = chip_info->n_host;
+	phy_nr  = core_nr * chip_info->n_phy;
+	port_nr = phy_nr;
+
+	memset(sha, 0x00, sizeof(struct sas_ha_struct));
+	arr_phy  = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+	arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+	if (!arr_phy || !arr_port)
+		goto exit_free;
+
+	sha->sas_phy = arr_phy;
+	sha->sas_port = arr_port;
+
+	sha->lldd_ha = kzalloc(sizeof(struct mvs_prv_info), GFP_KERNEL);
+	if (!sha->lldd_ha)
+		goto exit_free;
+
+	((struct mvs_prv_info *)sha->lldd_ha)->n_host = core_nr;
+
+	shost->transportt = mvs_stt;
+	shost->max_id = 128;
+	shost->max_lun = ~0;
+	shost->max_channel = 1;
+	shost->max_cmd_len = 16;
+
+	return 0;
+exit_free:
+	kfree(arr_phy);
+	kfree(arr_port);
+	return -1;
+
+}
+
+static void  __devinit mvs_post_sas_ha_init(struct Scsi_Host *shost,
+			const struct mvs_chip_info *chip_info)
+{
+	int can_queue, i = 0, j = 0;
+	struct mvs_info *mvi = NULL;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	unsigned short nr_core = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+	for (j = 0; j < nr_core; j++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+		for (i = 0; i < chip_info->n_phy; i++) {
+			sha->sas_phy[j * chip_info->n_phy  + i] =
+				&mvi->phy[i].sas_phy;
+			sha->sas_port[j * chip_info->n_phy + i] =
+				&mvi->port[i].sas_port;
+		}
+	}
+
+	sha->sas_ha_name = DRV_NAME;
+	sha->dev = mvi->dev;
+	sha->lldd_module = THIS_MODULE;
+	sha->sas_addr = &mvi->sas_addr[0];
+
+	sha->num_phys = nr_core * chip_info->n_phy;
+
+	sha->lldd_max_execute_num = 1;
+
+	if (mvi->flags & MVF_FLAG_SOC)
+		can_queue = MVS_SOC_CAN_QUEUE;
+	else
+		can_queue = MVS_CAN_QUEUE;
+
+	sha->lldd_queue_size = can_queue;
+	shost->can_queue = can_queue;
+	mvi->shost->cmd_per_lun = MVS_SLOTS/sha->num_phys;
+	sha->core.shost = mvi->shost;
+}
+
+static void mvs_init_sas_add(struct mvs_info *mvi)
+{
+	u8 i;
+	for (i = 0; i < mvi->chip->n_phy; i++) {
+		mvi->phy[i].dev_sas_addr = 0x5005043011ab0000ULL;
+		mvi->phy[i].dev_sas_addr =
+			cpu_to_be64((u64)(*(u64 *)&mvi->phy[i].dev_sas_addr));
+	}
+
+	memcpy(mvi->sas_addr, &mvi->phy[0].dev_sas_addr, SAS_ADDR_SIZE);
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	unsigned int rc, nhost = 0;
+	struct mvs_info *mvi;
+	irq_handler_t irq_handler = mvs_interrupt;
+	struct Scsi_Host *shost = NULL;
+	const struct mvs_chip_info *chip;
+
+	dev_printk(KERN_INFO, &pdev->dev,
+		"mvsas: driver version %s\n", DRV_VERSION);
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out_enable;
+
+	pci_set_master(pdev);
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_disable;
+
+	rc = pci_go_64(pdev);
+	if (rc)
+		goto err_out_regions;
+
+	shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+	if (!shost) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	chip = &mvs_chips[ent->driver_data];
+	SHOST_TO_SAS_HA(shost) =
+		kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+	if (!SHOST_TO_SAS_HA(shost)) {
+		kfree(shost);
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	rc = mvs_prep_sas_ha_init(shost, chip);
+	if (rc) {
+		kfree(shost);
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+
+	do {
+		mvi = mvs_pci_alloc(pdev, ent, shost, nhost);
+		if (!mvi) {
+			rc = -ENOMEM;
+			goto err_out_regions;
+		}
+
+		mvs_init_sas_add(mvi);
+
+		mvi->instance = nhost;
+		rc = MVS_CHIP_DISP->chip_init(mvi);
+		if (rc) {
+			mvs_free(mvi);
+			goto err_out_regions;
+		}
+		nhost++;
+	} while (nhost < chip->n_host);
+
+	mvs_post_sas_ha_init(shost, chip);
+
+	rc = scsi_add_host(shost, &pdev->dev);
+	if (rc)
+		goto err_out_shost;
+
+	rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_out_shost;
+	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED,
+		DRV_NAME, SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_not_sas;
+
+	MVS_CHIP_DISP->interrupt_enable(mvi);
+
+	scsi_scan_host(mvi->shost);
+
+	return 0;
+
+err_not_sas:
+	sas_unregister_ha(SHOST_TO_SAS_HA(shost));
+err_out_shost:
+	scsi_remove_host(mvi->shost);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_enable:
+	return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+	unsigned short core_nr, i = 0;
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct mvs_info *mvi = NULL;
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+#ifdef MVS_USE_TASKLET
+	tasklet_kill(&mv_tasklet);
+#endif
+
+	pci_set_drvdata(pdev, NULL);
+	sas_unregister_ha(sha);
+	sas_remove_host(mvi->shost);
+	scsi_remove_host(mvi->shost);
+
+	MVS_CHIP_DISP->interrupt_disable(mvi);
+	free_irq(mvi->irq, sha);
+	for (i = 0; i < core_nr; i++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+		mvs_free(mvi);
+	}
+	kfree(sha->sas_phy);
+	kfree(sha->sas_port);
+	kfree(sha);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	return;
+}
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+	{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+	{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+	{
+		.vendor 	= PCI_VENDOR_ID_MARVELL,
+		.device 	= 0x6440,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x6480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_6485,
+	},
+	{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+	{ PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
+	{ PCI_VDEVICE(MARVELL, 0x9480), chip_9480 },
+	{ PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
+
+	{ }	/* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= mvs_pci_table,
+	.probe		= mvs_pci_init,
+	.remove		= __devexit_p(mvs_pci_remove),
+};
+
+/* task handler */
+struct task_struct *mvs_th;
+static int __init mvs_init(void)
+{
+	int rc;
+	mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+	if (!mvs_stt)
+		return -ENOMEM;
+
+	rc = pci_register_driver(&mvs_pci_driver);
+
+	if (rc)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	sas_release_transport(mvs_stt);
+	return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+	pci_unregister_driver(&mvs_pci_driver);
+	sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+#ifdef CONFIG_PCI
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);
+#endif
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
new file mode 100644
index 00000000000..0d213864121
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -0,0 +1,2154 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+	if (task->lldd_task) {
+		struct mvs_slot_info *slot;
+		slot = task->lldd_task;
+		*tag = slot->slot_tag;
+		return 1;
+	}
+	return 0;
+}
+
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
+{
+	void *bitmap = &mvi->tags;
+	clear_bit(tag, bitmap);
+}
+
+void mvs_tag_free(struct mvs_info *mvi, u32 tag)
+{
+	mvs_tag_clear(mvi, tag);
+}
+
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+	void *bitmap = &mvi->tags;
+	set_bit(tag, bitmap);
+}
+
+inline int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
+{
+	unsigned int index, tag;
+	void *bitmap = &mvi->tags;
+
+	index = find_first_zero_bit(bitmap, mvi->tags_num);
+	tag = index;
+	if (tag >= mvi->tags_num)
+		return -SAS_QUEUE_FULL;
+	mvs_tag_set(mvi, tag);
+	*tag_out = tag;
+	return 0;
+}
+
+void mvs_tag_init(struct mvs_info *mvi)
+{
+	int i;
+	for (i = 0; i < mvi->tags_num; ++i)
+		mvs_tag_clear(mvi, i);
+}
+
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
+{
+	u32 i;
+	u32 run;
+	u32 offset;
+
+	offset = 0;
+	while (size) {
+		printk(KERN_DEBUG"%08X : ", baseaddr + offset);
+		if (size >= 16)
+			run = 16;
+		else
+			run = size;
+		size -= run;
+		for (i = 0; i < 16; i++) {
+			if (i < run)
+				printk(KERN_DEBUG"%02X ", (u32)data[i]);
+			else
+				printk(KERN_DEBUG"   ");
+		}
+		printk(KERN_DEBUG": ");
+		for (i = 0; i < run; i++)
+			printk(KERN_DEBUG"%c",
+				isalnum(data[i]) ? data[i] : '.');
+		printk(KERN_DEBUG"\n");
+		data = &data[16];
+		offset += run;
+	}
+	printk(KERN_DEBUG"\n");
+}
+
+#if (_MV_DUMP > 1)
+static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
+				   enum sas_protocol proto)
+{
+	u32 offset;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+	offset = slot->cmd_size + MVS_OAF_SZ +
+	    MVS_CHIP_DISP->prd_size() * slot->n_elem;
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Status buffer[%d] :\n",
+			tag);
+	mvs_hexdump(32, (u8 *) slot->response,
+		    (u32) slot->buf_dma + offset);
+}
+#endif
+
+static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
+				enum sas_protocol proto)
+{
+#if (_MV_DUMP > 1)
+	u32 sz, w_ptr;
+	u64 addr;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+	/*Delivery Queue */
+	sz = MVS_CHIP_SLOT_SZ;
+	w_ptr = slot->tx;
+	addr = mvi->tx_dma;
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Delivery Queue Base Address=0x%llX (PA)"
+		"(tx_dma=0x%llX), Entry=%04d\n",
+		addr, (unsigned long long)mvi->tx_dma, w_ptr);
+	mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
+			(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
+	/*Command List */
+	addr = mvi->slot_dma;
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Command List Base Address=0x%llX (PA)"
+		"(slot_dma=0x%llX), Header=%03d\n",
+		addr, (unsigned long long)slot->buf_dma, tag);
+	dev_printk(KERN_DEBUG, mvi->dev, "Command Header[%03d]:\n", tag);
+	/*mvs_cmd_hdr */
+	mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
+		(u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
+	/*1.command table area */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Command Table :\n");
+	mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
+	/*2.open address frame area */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->Open Address Frame :\n");
+	mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
+				(u32) slot->buf_dma + slot->cmd_size);
+	/*3.status buffer */
+	mvs_hba_sb_dump(mvi, tag, proto);
+	/*4.PRD table */
+	dev_printk(KERN_DEBUG, mvi->dev, "+---->PRD table :\n");
+	mvs_hexdump(MVS_CHIP_DISP->prd_size() * slot->n_elem,
+		(u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
+		(u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
+#endif
+}
+
+static void mvs_hba_cq_dump(struct mvs_info *mvi)
+{
+#if (_MV_DUMP > 2)
+	u64 addr;
+	void __iomem *regs = mvi->regs;
+	u32 entry = mvi->rx_cons + 1;
+	u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
+
+	/*Completion Queue */
+	addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
+	dev_printk(KERN_DEBUG, mvi->dev, "Completion Task = 0x%p\n",
+		   mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+	dev_printk(KERN_DEBUG, mvi->dev,
+		"Completion List Base Address=0x%llX (PA), "
+		"CQ_Entry=%04d, CQ_WP=0x%08X\n",
+		addr, entry - 1, mvi->rx[0]);
+	mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
+		    mvi->rx_dma + sizeof(u32) * entry);
+#endif
+}
+
+void mvs_get_sas_addr(void *buf, u32 buflen)
+{
+	/*memcpy(buf, "\x50\x05\x04\x30\x11\xab\x64\x40", 8);*/
+}
+
+struct mvs_info *mvs_find_dev_mvi(struct domain_device *dev)
+{
+	unsigned long i = 0, j = 0, hi = 0;
+	struct sas_ha_struct *sha = dev->port->ha;
+	struct mvs_info *mvi = NULL;
+	struct asd_sas_phy *phy;
+
+	while (sha->sas_port[i]) {
+		if (sha->sas_port[i] == dev->port) {
+			phy =  container_of(sha->sas_port[i]->phy_list.next,
+				struct asd_sas_phy, port_phy_el);
+			j = 0;
+			while (sha->sas_phy[j]) {
+				if (sha->sas_phy[j] == phy)
+					break;
+				j++;
+			}
+			break;
+		}
+		i++;
+	}
+	hi = j/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+	return mvi;
+
+}
+
+/* FIXME */
+int mvs_find_dev_phyno(struct domain_device *dev, int *phyno)
+{
+	unsigned long i = 0, j = 0, n = 0, num = 0;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct sas_ha_struct *sha = dev->port->ha;
+
+	while (sha->sas_port[i]) {
+		if (sha->sas_port[i] == dev->port) {
+			struct asd_sas_phy *phy;
+			list_for_each_entry(phy,
+				&sha->sas_port[i]->phy_list, port_phy_el) {
+				j = 0;
+				while (sha->sas_phy[j]) {
+					if (sha->sas_phy[j] == phy)
+						break;
+					j++;
+				}
+				phyno[n] = (j >= mvi->chip->n_phy) ?
+					(j - mvi->chip->n_phy) : j;
+				num++;
+				n++;
+			}
+			break;
+		}
+		i++;
+	}
+	return num;
+}
+
+static inline void mvs_free_reg_set(struct mvs_info *mvi,
+				struct mvs_device *dev)
+{
+	if (!dev) {
+		mv_printk("device has been free.\n");
+		return;
+	}
+	if (dev->runing_req != 0)
+		return;
+	if (dev->taskfileset == MVS_ID_NOT_MAPPED)
+		return;
+	MVS_CHIP_DISP->free_reg_set(mvi, &dev->taskfileset);
+}
+
+static inline u8 mvs_assign_reg_set(struct mvs_info *mvi,
+				struct mvs_device *dev)
+{
+	if (dev->taskfileset != MVS_ID_NOT_MAPPED)
+		return 0;
+	return MVS_CHIP_DISP->assign_reg_set(mvi, &dev->taskfileset);
+}
+
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard)
+{
+	u32 no;
+	for_each_phy(phy_mask, phy_mask, no) {
+		if (!(phy_mask & 1))
+			continue;
+		MVS_CHIP_DISP->phy_reset(mvi, no, hard);
+	}
+}
+
+/* FIXME: locking? */
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata)
+{
+	int rc = 0, phy_id = sas_phy->id;
+	u32 tmp, i = 0, hi;
+	struct sas_ha_struct *sha = sas_phy->ha;
+	struct mvs_info *mvi = NULL;
+
+	while (sha->sas_phy[i]) {
+		if (sha->sas_phy[i] == sas_phy)
+			break;
+		i++;
+	}
+	hi = i/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+	switch (func) {
+	case PHY_FUNC_SET_LINK_RATE:
+		MVS_CHIP_DISP->phy_set_link_rate(mvi, phy_id, funcdata);
+		break;
+
+	case PHY_FUNC_HARD_RESET:
+		tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_id);
+		if (tmp & PHY_RST_HARD)
+			break;
+		MVS_CHIP_DISP->phy_reset(mvi, phy_id, 1);
+		break;
+
+	case PHY_FUNC_LINK_RESET:
+		MVS_CHIP_DISP->phy_enable(mvi, phy_id);
+		MVS_CHIP_DISP->phy_reset(mvi, phy_id, 0);
+		break;
+
+	case PHY_FUNC_DISABLE:
+		MVS_CHIP_DISP->phy_disable(mvi, phy_id);
+		break;
+	case PHY_FUNC_RELEASE_SPINUP_HOLD:
+	default:
+		rc = -EOPNOTSUPP;
+	}
+	msleep(200);
+	return rc;
+}
+
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+				u32 off_lo, u32 off_hi, u64 sas_addr)
+{
+	u32 lo = (u32)sas_addr;
+	u32 hi = (u32)(sas_addr>>32);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_lo);
+	MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, lo);
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_hi);
+	MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, hi);
+}
+
+static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	struct sas_ha_struct *sas_ha;
+	if (!phy->phy_attached)
+		return;
+
+	if (!(phy->att_dev_info & PORT_DEV_TRGT_MASK)
+		&& phy->phy_type & PORT_TYPE_SAS) {
+		return;
+	}
+
+	sas_ha = mvi->sas;
+	sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+	if (sas_phy->phy) {
+		struct sas_phy *sphy = sas_phy->phy;
+
+		sphy->negotiated_linkrate = sas_phy->linkrate;
+		sphy->minimum_linkrate = phy->minimum_linkrate;
+		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		sphy->maximum_linkrate = phy->maximum_linkrate;
+		sphy->maximum_linkrate_hw = MVS_CHIP_DISP->phy_max_link_rate();
+	}
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		struct sas_identify_frame *id;
+
+		id = (struct sas_identify_frame *)phy->frame_rcvd;
+		id->dev_type = phy->identify.device_type;
+		id->initiator_bits = SAS_PROTOCOL_ALL;
+		id->target_bits = phy->identify.target_port_protocols;
+	} else if (phy->phy_type & PORT_TYPE_SATA) {
+		/*Nothing*/
+	}
+	mv_dprintk("phy %d byte dmaded.\n", i + mvi->id * mvi->chip->n_phy);
+
+	sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+
+	mvi->sas->notify_port_event(sas_phy,
+				   PORTE_BYTES_DMAED);
+}
+
+int mvs_slave_alloc(struct scsi_device *scsi_dev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+	if (dev_is_sata(dev)) {
+		/* We don't need to rescan targets
+		 * if REPORT_LUNS request is failed
+		 */
+		if (scsi_dev->lun > 0)
+			return -ENXIO;
+		scsi_dev->tagged_supported = 1;
+	}
+
+	return sas_slave_alloc(scsi_dev);
+}
+
+int mvs_slave_configure(struct scsi_device *sdev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(sdev);
+	int ret = sas_slave_configure(sdev);
+
+	if (ret)
+		return ret;
+	if (dev_is_sata(dev)) {
+		/* may set PIO mode */
+	#if MV_DISABLE_NCQ
+		struct ata_port *ap = dev->sata_dev.ap;
+		struct ata_device *adev = ap->link.device;
+		adev->flags |= ATA_DFLAG_NCQ_OFF;
+		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+	#endif
+	}
+	return 0;
+}
+
+void mvs_scan_start(struct Scsi_Host *shost)
+{
+	int i, j;
+	unsigned short core_nr;
+	struct mvs_info *mvi;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+	for (j = 0; j < core_nr; j++) {
+		mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+		for (i = 0; i < mvi->chip->n_phy; ++i)
+			mvs_bytes_dmaed(mvi, i);
+	}
+}
+
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	/* give the phy enabling interrupt event time to come in (1s
+	 * is empirically about all it takes) */
+	if (time < HZ)
+		return 0;
+	/* Wait for discovery to finish */
+	scsi_flush_work(shost);
+	return 1;
+}
+
+static int mvs_task_prep_smp(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei)
+{
+	int elem, rc, i;
+	struct sas_task *task = tei->task;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct domain_device *dev = task->dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct scatterlist *sg_req, *sg_resp;
+	u32 req_len, resp_len, tag = tei->tag;
+	void *buf_tmp;
+	u8 *buf_oaf;
+	dma_addr_t buf_tmp_dma;
+	void *buf_prd;
+	struct mvs_slot_info *slot = &mvi->slot_info[tag];
+	u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#if _MV_DUMP
+	u8 *buf_cmd;
+	void *from;
+#endif
+	/*
+	 * DMA-map SMP request, response buffers
+	 */
+	sg_req = &task->smp_task.smp_req;
+	elem = dma_map_sg(mvi->dev, sg_req, 1, PCI_DMA_TODEVICE);
+	if (!elem)
+		return -ENOMEM;
+	req_len = sg_dma_len(sg_req);
+
+	sg_resp = &task->smp_task.smp_resp;
+	elem = dma_map_sg(mvi->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+	if (!elem) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	resp_len = SB_RFB_MAX;
+
+	/* must be in dwords */
+	if ((req_len & 0x3) || (resp_len & 0x3)) {
+		rc = -EINVAL;
+		goto err_out_2;
+	}
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ***** */
+	buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+#if _MV_DUMP
+	buf_cmd = buf_tmp;
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+	buf_tmp += req_len;
+	buf_tmp_dma += req_len;
+	slot->cmd_size = req_len;
+#else
+	hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table *********************************** */
+	buf_prd = buf_tmp;
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+
+	i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	/*
+	 * Fill in TX ring and command slot header
+	 */
+	slot->tx = mvi->tx_prod;
+	mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
+					TXQ_MODE_I | tag |
+					(sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+	hdr->flags |= flags;
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
+	hdr->tags = cpu_to_le32(tag);
+	hdr->data_len = 0;
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, SMP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_SMP << 4) | 0x01;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = 0xFFFF;		/* SAS SPEC */
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+
+#if _MV_DUMP
+	/* copy cmd table */
+	from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
+	memcpy(buf_cmd, from + sg_req->offset, req_len);
+	kunmap_atomic(from, KM_IRQ0);
+#endif
+	return 0;
+
+err_out_2:
+	dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_resp, 1,
+		     PCI_DMA_FROMDEVICE);
+err_out:
+	dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_req, 1,
+		     PCI_DMA_TODEVICE);
+	return rc;
+}
+
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int mvs_task_prep_ata(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei)
+{
+	struct sas_task *task = tei->task;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_slot_info *slot;
+	void *buf_prd;
+	u32 tag = tei->tag, hdr_tag;
+	u32 flags, del_q;
+	void *buf_tmp;
+	u8 *buf_cmd, *buf_oaf;
+	dma_addr_t buf_tmp_dma;
+	u32 i, req_len, resp_len;
+	const u32 max_resp_len = SB_RFB_MAX;
+
+	if (mvs_assign_reg_set(mvi, mvi_dev) == MVS_ID_NOT_MAPPED) {
+		mv_dprintk("Have not enough regiset for dev %d.\n",
+			mvi_dev->device_id);
+		return -EBUSY;
+	}
+	slot = &mvi->slot_info[tag];
+	slot->tx = mvi->tx_prod;
+	del_q = TXQ_MODE_I | tag |
+		(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
+		(sas_port->phy_mask << TXQ_PHY_SHIFT) |
+		(mvi_dev->taskfileset << TXQ_SRS_SHIFT);
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (task->data_dir == DMA_FROM_DEVICE)
+		flags = (MVS_CHIP_DISP->prd_count() << MCH_PRD_LEN_SHIFT);
+	else
+		flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#else
+	flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#endif
+	if (task->ata_task.use_ncq)
+		flags |= MCH_FPDMA;
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
+		if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
+			flags |= MCH_ATAPI;
+	}
+
+	/* FIXME: fill in port multiplier number */
+
+	hdr->flags = cpu_to_le32(flags);
+
+	/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
+	if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr_tag))
+		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+	else
+		hdr_tag = tag;
+
+	hdr->tags = cpu_to_le32(hdr_tag);
+
+	hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
+	buf_cmd = buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_ATA_CMD_SZ;
+	buf_tmp_dma += MVS_ATA_CMD_SZ;
+#if _MV_DUMP
+	slot->cmd_size = MVS_ATA_CMD_SZ;
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	/* used for STP.  unused for SATA? */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table ********************************************* */
+	buf_prd = buf_tmp;
+
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+	i = MVS_CHIP_DISP->prd_size() * MVS_CHIP_DISP->prd_count();
+
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	/* FIXME: probably unused, for SATA.  kept here just in case
+	 * we get a STP/SATA error information record
+	 */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	req_len = sizeof(struct host_to_dev_fis);
+	resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
+	    sizeof(struct mvs_err_info) - i;
+
+	/* request, response lengths */
+	resp_len = min(resp_len, max_resp_len);
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+	if (likely(!task->ata_task.device_control_reg_update))
+		task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+	/* fill in command FIS and ATAPI CDB */
+	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+	if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+		memcpy(buf_cmd + STP_ATAPI_CMD,
+			task->ata_task.atapi_packet, 16);
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, STP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_STP << 4) | 0x1;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	if (task->data_dir == DMA_FROM_DEVICE)
+		MVS_CHIP_DISP->dma_fix(mvi->bulk_buffer_dma,
+				TRASH_BUCKET_SIZE, tei->n_elem, buf_prd);
+#endif
+	return 0;
+}
+
+static int mvs_task_prep_ssp(struct mvs_info *mvi,
+			     struct mvs_task_exec_info *tei, int is_tmf,
+			     struct mvs_tmf_task *tmf)
+{
+	struct sas_task *task = tei->task;
+	struct mvs_cmd_hdr *hdr = tei->hdr;
+	struct mvs_port *port = tei->port;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct asd_sas_port *sas_port = dev->port;
+	struct mvs_slot_info *slot;
+	void *buf_prd;
+	struct ssp_frame_hdr *ssp_hdr;
+	void *buf_tmp;
+	u8 *buf_cmd, *buf_oaf, fburst = 0;
+	dma_addr_t buf_tmp_dma;
+	u32 flags;
+	u32 resp_len, req_len, i, tag = tei->tag;
+	const u32 max_resp_len = SB_RFB_MAX;
+	u32 phy_mask;
+
+	slot = &mvi->slot_info[tag];
+
+	phy_mask = ((port->wide_port_phymap) ? port->wide_port_phymap :
+		sas_port->phy_mask) & TXQ_PHY_MASK;
+
+	slot->tx = mvi->tx_prod;
+	mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
+				(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
+				(phy_mask << TXQ_PHY_SHIFT));
+
+	flags = MCH_RETRY;
+	if (task->ssp_task.enable_first_burst) {
+		flags |= MCH_FBURST;
+		fburst = (1 << 7);
+	}
+	if (is_tmf)
+		flags |= (MCH_SSP_FR_TASK << MCH_SSP_FR_TYPE_SHIFT);
+	else
+		flags |= (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT);
+	hdr->flags = cpu_to_le32(flags | (tei->n_elem << MCH_PRD_LEN_SHIFT));
+	hdr->tags = cpu_to_le32(tag);
+	hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+	/*
+	 * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+	 */
+
+	/* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
+	buf_cmd = buf_tmp = slot->buf;
+	buf_tmp_dma = slot->buf_dma;
+
+	hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_SSP_CMD_SZ;
+	buf_tmp_dma += MVS_SSP_CMD_SZ;
+#if _MV_DUMP
+	slot->cmd_size = MVS_SSP_CMD_SZ;
+#endif
+
+	/* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+	buf_oaf = buf_tmp;
+	hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+	buf_tmp += MVS_OAF_SZ;
+	buf_tmp_dma += MVS_OAF_SZ;
+
+	/* region 3: PRD table ********************************************* */
+	buf_prd = buf_tmp;
+	if (tei->n_elem)
+		hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+	else
+		hdr->prd_tbl = 0;
+
+	i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+	buf_tmp += i;
+	buf_tmp_dma += i;
+
+	/* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+	slot->response = buf_tmp;
+	hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+	if (mvi->flags & MVF_FLAG_SOC)
+		hdr->reserved[0] = 0;
+
+	resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
+	    sizeof(struct mvs_err_info) - i;
+	resp_len = min(resp_len, max_resp_len);
+
+	req_len = sizeof(struct ssp_frame_hdr) + 28;
+
+	/* request, response lengths */
+	hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+	/* generate open address frame hdr (first 12 bytes) */
+	/* initiator, SSP, ftype 1h */
+	buf_oaf[0] = (1 << 7) | (PROTOCOL_SSP << 4) | 0x1;
+	buf_oaf[1] = dev->linkrate & 0xf;
+	*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+	memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+	/* fill in SSP frame header (Command Table.SSP frame header) */
+	ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
+
+	if (is_tmf)
+		ssp_hdr->frame_type = SSP_TASK;
+	else
+		ssp_hdr->frame_type = SSP_COMMAND;
+
+	memcpy(ssp_hdr->hashed_dest_addr, dev->hashed_sas_addr,
+	       HASHED_SAS_ADDR_SIZE);
+	memcpy(ssp_hdr->hashed_src_addr,
+	       dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+	ssp_hdr->tag = cpu_to_be16(tag);
+
+	/* fill in IU for TASK and Command Frame */
+	buf_cmd += sizeof(*ssp_hdr);
+	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+
+	if (ssp_hdr->frame_type != SSP_TASK) {
+		buf_cmd[9] = fburst | task->ssp_task.task_attr |
+				(task->ssp_task.task_prio << 3);
+		memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
+	} else{
+		buf_cmd[10] = tmf->tmf;
+		switch (tmf->tmf) {
+		case TMF_ABORT_TASK:
+		case TMF_QUERY_TASK:
+			buf_cmd[12] =
+				(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+			buf_cmd[13] =
+				tmf->tag_of_task_to_be_managed & 0xff;
+			break;
+		default:
+			break;
+		}
+	}
+	/* fill in PRD (scatter/gather) table, if any */
+	MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+	return 0;
+}
+
+#define	DEV_IS_GONE(mvi_dev)	((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+				struct completion *completion,int is_tmf,
+				struct mvs_tmf_task *tmf)
+{
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct mvs_task_exec_info tei;
+	struct sas_task *t = task;
+	struct mvs_slot_info *slot;
+	u32 tag = 0xdeadbeef, rc, n_elem = 0;
+	u32 n = num, pass = 0;
+	unsigned long flags = 0;
+
+	if (!dev->port) {
+		struct task_status_struct *tsm = &t->task_status;
+
+		tsm->resp = SAS_TASK_UNDELIVERED;
+		tsm->stat = SAS_PHY_DOWN;
+		t->task_done(t);
+		return 0;
+	}
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	do {
+		dev = t->dev;
+		mvi_dev = dev->lldd_dev;
+		if (DEV_IS_GONE(mvi_dev)) {
+			if (mvi_dev)
+				mv_dprintk("device %d not ready.\n",
+					mvi_dev->device_id);
+			else
+				mv_dprintk("device %016llx not ready.\n",
+					SAS_ADDR(dev->sas_addr));
+
+			rc = SAS_PHY_DOWN;
+			goto out_done;
+		}
+
+		if (dev->port->id >= mvi->chip->n_phy)
+			tei.port = &mvi->port[dev->port->id - mvi->chip->n_phy];
+		else
+			tei.port = &mvi->port[dev->port->id];
+
+		if (!tei.port->port_attached) {
+			if (sas_protocol_ata(t->task_proto)) {
+				mv_dprintk("port %d does not"
+					"attached device.\n", dev->port->id);
+				rc = SAS_PHY_DOWN;
+				goto out_done;
+			} else {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+				t->task_done(t);
+				if (n > 1)
+					t = list_entry(t->list.next,
+							struct sas_task, list);
+				continue;
+			}
+		}
+
+		if (!sas_protocol_ata(t->task_proto)) {
+			if (t->num_scatter) {
+				n_elem = dma_map_sg(mvi->dev,
+						    t->scatter,
+						    t->num_scatter,
+						    t->data_dir);
+				if (!n_elem) {
+					rc = -ENOMEM;
+					goto err_out;
+				}
+			}
+		} else {
+			n_elem = t->num_scatter;
+		}
+
+		rc = mvs_tag_alloc(mvi, &tag);
+		if (rc)
+			goto err_out;
+
+		slot = &mvi->slot_info[tag];
+
+
+		t->lldd_task = NULL;
+		slot->n_elem = n_elem;
+		slot->slot_tag = tag;
+		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+		tei.task = t;
+		tei.hdr = &mvi->slot[tag];
+		tei.tag = tag;
+		tei.n_elem = n_elem;
+		switch (t->task_proto) {
+		case SAS_PROTOCOL_SMP:
+			rc = mvs_task_prep_smp(mvi, &tei);
+			break;
+		case SAS_PROTOCOL_SSP:
+			rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
+			break;
+		case SAS_PROTOCOL_SATA:
+		case SAS_PROTOCOL_STP:
+		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+			rc = mvs_task_prep_ata(mvi, &tei);
+			break;
+		default:
+			dev_printk(KERN_ERR, mvi->dev,
+				"unknown sas_task proto: 0x%x\n",
+				t->task_proto);
+			rc = -EINVAL;
+			break;
+		}
+
+		if (rc) {
+			mv_dprintk("rc is %x\n", rc);
+			goto err_out_tag;
+		}
+		slot->task = t;
+		slot->port = tei.port;
+		t->lldd_task = slot;
+		list_add_tail(&slot->entry, &tei.port->list);
+		/* TODO: select normal or high priority */
+		spin_lock(&t->task_state_lock);
+		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+		spin_unlock(&t->task_state_lock);
+
+		mvs_hba_memory_dump(mvi, tag, t->task_proto);
+		mvi_dev->runing_req++;
+		++pass;
+		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+		if (n > 1)
+			t = list_entry(t->list.next, struct sas_task, list);
+	} while (--n);
+	rc = 0;
+	goto out_done;
+
+err_out_tag:
+	mvs_tag_free(mvi, tag);
+err_out:
+
+	dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+	if (!sas_protocol_ata(t->task_proto))
+		if (n_elem)
+			dma_unmap_sg(mvi->dev, t->scatter, n_elem,
+				     t->data_dir);
+out_done:
+	if (likely(pass)) {
+		MVS_CHIP_DISP->start_delivery(mvi,
+			(mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+	}
+	spin_unlock_irqrestore(&mvi->lock, flags);
+	return rc;
+}
+
+int mvs_queue_command(struct sas_task *task, const int num,
+			gfp_t gfp_flags)
+{
+	return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
+			  struct mvs_slot_info *slot, u32 slot_idx)
+{
+	if (!slot->task)
+		return;
+	if (!sas_protocol_ata(task->task_proto))
+		if (slot->n_elem)
+			dma_unmap_sg(mvi->dev, task->scatter,
+				     slot->n_elem, task->data_dir);
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SMP:
+		dma_unmap_sg(mvi->dev, &task->smp_task.smp_resp, 1,
+			     PCI_DMA_FROMDEVICE);
+		dma_unmap_sg(mvi->dev, &task->smp_task.smp_req, 1,
+			     PCI_DMA_TODEVICE);
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SSP:
+	default:
+		/* do nothing */
+		break;
+	}
+	list_del_init(&slot->entry);
+	task->lldd_task = NULL;
+	slot->task = NULL;
+	slot->port = NULL;
+	slot->slot_tag = 0xFFFFFFFF;
+	mvs_slot_free(mvi, slot_idx);
+}
+
+static void mvs_update_wideport(struct mvs_info *mvi, int i)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct mvs_port *port = phy->port;
+	int j, no;
+
+	for_each_phy(port->wide_port_phymap, j, no) {
+		if (j & 1) {
+			MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+						PHYR_WIDE_PORT);
+			MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+						port->wide_port_phymap);
+		} else {
+			MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+						PHYR_WIDE_PORT);
+			MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+						0);
+		}
+	}
+}
+
+static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
+{
+	u32 tmp;
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct mvs_port *port = phy->port;
+
+	tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, i);
+	if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
+		if (!port)
+			phy->phy_attached = 1;
+		return tmp;
+	}
+
+	if (port) {
+		if (phy->phy_type & PORT_TYPE_SAS) {
+			port->wide_port_phymap &= ~(1U << i);
+			if (!port->wide_port_phymap)
+				port->port_attached = 0;
+			mvs_update_wideport(mvi, i);
+		} else if (phy->phy_type & PORT_TYPE_SATA)
+			port->port_attached = 0;
+		phy->port = NULL;
+		phy->phy_attached = 0;
+		phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+	}
+	return 0;
+}
+
+static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
+{
+	u32 *s = (u32 *) buf;
+
+	if (!s)
+		return NULL;
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
+	s[3] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
+	s[2] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
+	s[1] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
+	s[0] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+	/* Workaround: take some ATAPI devices for ATA */
+	if (((s[1] & 0x00FFFFFF) == 0x00EB1401) && (*(u8 *)&s[3] == 0x01))
+		s[1] = 0x00EB1401 | (*((u8 *)&s[1] + 3) & 0x10);
+
+	return s;
+}
+
+static u32 mvs_is_sig_fis_received(u32 irq_status)
+{
+	return irq_status & PHYEV_SIG_FIS;
+}
+
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st)
+{
+	struct mvs_phy *phy = &mvi->phy[i];
+	struct sas_identify_frame *id;
+
+	id = (struct sas_identify_frame *)phy->frame_rcvd;
+
+	if (get_st) {
+		phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, i);
+		phy->phy_status = mvs_is_phy_ready(mvi, i);
+	}
+
+	if (phy->phy_status) {
+		int oob_done = 0;
+		struct asd_sas_phy *sas_phy = &mvi->phy[i].sas_phy;
+
+		oob_done = MVS_CHIP_DISP->oob_done(mvi, i);
+
+		MVS_CHIP_DISP->fix_phy_info(mvi, i, id);
+		if (phy->phy_type & PORT_TYPE_SATA) {
+			phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
+			if (mvs_is_sig_fis_received(phy->irq_status)) {
+				phy->phy_attached = 1;
+				phy->att_dev_sas_addr =
+					i + mvi->id * mvi->chip->n_phy;
+				if (oob_done)
+					sas_phy->oob_mode = SATA_OOB_MODE;
+				phy->frame_rcvd_size =
+				    sizeof(struct dev_to_host_fis);
+				mvs_get_d2h_reg(mvi, i, id);
+			} else {
+				u32 tmp;
+				dev_printk(KERN_DEBUG, mvi->dev,
+					"Phy%d : No sig fis\n", i);
+				tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, i);
+				MVS_CHIP_DISP->write_port_irq_mask(mvi, i,
+						tmp | PHYEV_SIG_FIS);
+				phy->phy_attached = 0;
+				phy->phy_type &= ~PORT_TYPE_SATA;
+				MVS_CHIP_DISP->phy_reset(mvi, i, 0);
+				goto out_done;
+			}
+		}		else if (phy->phy_type & PORT_TYPE_SAS
+			|| phy->att_dev_info & PORT_SSP_INIT_MASK) {
+			phy->phy_attached = 1;
+			phy->identify.device_type =
+				phy->att_dev_info & PORT_DEV_TYPE_MASK;
+
+			if (phy->identify.device_type == SAS_END_DEV)
+				phy->identify.target_port_protocols =
+							SAS_PROTOCOL_SSP;
+			else if (phy->identify.device_type != NO_DEVICE)
+				phy->identify.target_port_protocols =
+							SAS_PROTOCOL_SMP;
+			if (oob_done)
+				sas_phy->oob_mode = SAS_OOB_MODE;
+			phy->frame_rcvd_size =
+			    sizeof(struct sas_identify_frame);
+		}
+		memcpy(sas_phy->attached_sas_addr,
+			&phy->att_dev_sas_addr, SAS_ADDR_SIZE);
+
+		if (MVS_CHIP_DISP->phy_work_around)
+			MVS_CHIP_DISP->phy_work_around(mvi, i);
+	}
+	mv_dprintk("port %d attach dev info is %x\n",
+		i + mvi->id * mvi->chip->n_phy, phy->att_dev_info);
+	mv_dprintk("port %d attach sas addr is %llx\n",
+		i + mvi->id * mvi->chip->n_phy, phy->att_dev_sas_addr);
+out_done:
+	if (get_st)
+		MVS_CHIP_DISP->write_port_irq_stat(mvi, i, phy->irq_status);
+}
+
+static void mvs_port_notify_formed(struct asd_sas_phy *sas_phy, int lock)
+{
+	struct sas_ha_struct *sas_ha = sas_phy->ha;
+	struct mvs_info *mvi = NULL; int i = 0, hi;
+	struct mvs_phy *phy = sas_phy->lldd_phy;
+	struct asd_sas_port *sas_port = sas_phy->port;
+	struct mvs_port *port;
+	unsigned long flags = 0;
+	if (!sas_port)
+		return;
+
+	while (sas_ha->sas_phy[i]) {
+		if (sas_ha->sas_phy[i] == sas_phy)
+			break;
+		i++;
+	}
+	hi = i/((struct mvs_prv_info *)sas_ha->lldd_ha)->n_phy;
+	mvi = ((struct mvs_prv_info *)sas_ha->lldd_ha)->mvi[hi];
+	if (sas_port->id >= mvi->chip->n_phy)
+		port = &mvi->port[sas_port->id - mvi->chip->n_phy];
+	else
+		port = &mvi->port[sas_port->id];
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+	port->port_attached = 1;
+	phy->port = port;
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		port->wide_port_phymap = sas_port->phy_mask;
+		mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
+		mvs_update_wideport(mvi, sas_phy->id);
+	}
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+static void mvs_port_notify_deformed(struct asd_sas_phy *sas_phy, int lock)
+{
+	/*Nothing*/
+}
+
+
+void mvs_port_formed(struct asd_sas_phy *sas_phy)
+{
+	mvs_port_notify_formed(sas_phy, 1);
+}
+
+void mvs_port_deformed(struct asd_sas_phy *sas_phy)
+{
+	mvs_port_notify_deformed(sas_phy, 1);
+}
+
+struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi)
+{
+	u32 dev;
+	for (dev = 0; dev < MVS_MAX_DEVICES; dev++) {
+		if (mvi->devices[dev].dev_type == NO_DEVICE) {
+			mvi->devices[dev].device_id = dev;
+			return &mvi->devices[dev];
+		}
+	}
+
+	if (dev == MVS_MAX_DEVICES)
+		mv_printk("max support %d devices, ignore ..\n",
+			MVS_MAX_DEVICES);
+
+	return NULL;
+}
+
+void mvs_free_dev(struct mvs_device *mvi_dev)
+{
+	u32 id = mvi_dev->device_id;
+	memset(mvi_dev, 0, sizeof(*mvi_dev));
+	mvi_dev->device_id = id;
+	mvi_dev->dev_type = NO_DEVICE;
+	mvi_dev->dev_status = MVS_DEV_NORMAL;
+	mvi_dev->taskfileset = MVS_ID_NOT_MAPPED;
+}
+
+int mvs_dev_found_notify(struct domain_device *dev, int lock)
+{
+	unsigned long flags = 0;
+	int res = 0;
+	struct mvs_info *mvi = NULL;
+	struct domain_device *parent_dev = dev->parent;
+	struct mvs_device *mvi_device;
+
+	mvi = mvs_find_dev_mvi(dev);
+
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+
+	mvi_device = mvs_alloc_dev(mvi);
+	if (!mvi_device) {
+		res = -1;
+		goto found_out;
+	}
+	dev->lldd_dev = mvi_device;
+	mvi_device->dev_type = dev->dev_type;
+	mvi_device->mvi_info = mvi;
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+		int phy_id;
+		u8 phy_num = parent_dev->ex_dev.num_phys;
+		struct ex_phy *phy;
+		for (phy_id = 0; phy_id < phy_num; phy_id++) {
+			phy = &parent_dev->ex_dev.ex_phy[phy_id];
+			if (SAS_ADDR(phy->attached_sas_addr) ==
+				SAS_ADDR(dev->sas_addr)) {
+				mvi_device->attached_phy = phy_id;
+				break;
+			}
+		}
+
+		if (phy_id == phy_num) {
+			mv_printk("Error: no attached dev:%016llx"
+				"at ex:%016llx.\n",
+				SAS_ADDR(dev->sas_addr),
+				SAS_ADDR(parent_dev->sas_addr));
+			res = -1;
+		}
+	}
+
+found_out:
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	return res;
+}
+
+int mvs_dev_found(struct domain_device *dev)
+{
+	return mvs_dev_found_notify(dev, 1);
+}
+
+void mvs_dev_gone_notify(struct domain_device *dev, int lock)
+{
+	unsigned long flags = 0;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	if (lock)
+		spin_lock_irqsave(&mvi->lock, flags);
+
+	if (mvi_dev) {
+		mv_dprintk("found dev[%d:%x] is gone.\n",
+			mvi_dev->device_id, mvi_dev->dev_type);
+		mvs_free_reg_set(mvi, mvi_dev);
+		mvs_free_dev(mvi_dev);
+	} else {
+		mv_dprintk("found dev has gone.\n");
+	}
+	dev->lldd_dev = NULL;
+
+	if (lock)
+		spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+
+void mvs_dev_gone(struct domain_device *dev)
+{
+	mvs_dev_gone_notify(dev, 1);
+}
+
+static  struct sas_task *mvs_alloc_task(void)
+{
+	struct sas_task *task = kzalloc(sizeof(struct sas_task), GFP_KERNEL);
+
+	if (task) {
+		INIT_LIST_HEAD(&task->list);
+		spin_lock_init(&task->task_state_lock);
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_timer(&task->timer);
+		init_completion(&task->completion);
+	}
+	return task;
+}
+
+static  void mvs_free_task(struct sas_task *task)
+{
+	if (task) {
+		BUG_ON(!list_empty(&task->list));
+		kfree(task);
+	}
+}
+
+static void mvs_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+static void mvs_tmf_timedout(unsigned long data)
+{
+	struct sas_task *task = (struct sas_task *)data;
+
+	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	complete(&task->completion);
+}
+
+/* XXX */
+#define MVS_TASK_TIMEOUT 20
+static int mvs_exec_internal_tmf_task(struct domain_device *dev,
+			void *parameter, u32 para_len, struct mvs_tmf_task *tmf)
+{
+	int res, retry;
+	struct sas_task *task = NULL;
+
+	for (retry = 0; retry < 3; retry++) {
+		task = mvs_alloc_task();
+		if (!task)
+			return -ENOMEM;
+
+		task->dev = dev;
+		task->task_proto = dev->tproto;
+
+		memcpy(&task->ssp_task, parameter, para_len);
+		task->task_done = mvs_task_done;
+
+		task->timer.data = (unsigned long) task;
+		task->timer.function = mvs_tmf_timedout;
+		task->timer.expires = jiffies + MVS_TASK_TIMEOUT*HZ;
+		add_timer(&task->timer);
+
+		res = mvs_task_exec(task, 1, GFP_KERNEL, NULL, 1, tmf);
+
+		if (res) {
+			del_timer(&task->timer);
+			mv_printk("executing internel task failed:%d\n", res);
+			goto ex_err;
+		}
+
+		wait_for_completion(&task->completion);
+		res = -TMF_RESP_FUNC_FAILED;
+		/* Even TMF timed out, return direct. */
+		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				mv_printk("TMF task[%x] timeout.\n", tmf->tmf);
+				goto ex_err;
+			}
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		    task->task_status.stat == SAM_GOOD) {
+			res = TMF_RESP_FUNC_COMPLETE;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		      task->task_status.stat == SAS_DATA_UNDERRUN) {
+			/* no error, but return the number of bytes of
+			 * underrun */
+			res = task->task_status.residual;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		      task->task_status.stat == SAS_DATA_OVERRUN) {
+			mv_dprintk("blocked task error.\n");
+			res = -EMSGSIZE;
+			break;
+		} else {
+			mv_dprintk(" task to dev %016llx response: 0x%x "
+				    "status 0x%x\n",
+				    SAS_ADDR(dev->sas_addr),
+				    task->task_status.resp,
+				    task->task_status.stat);
+			mvs_free_task(task);
+			task = NULL;
+
+		}
+	}
+ex_err:
+	BUG_ON(retry == 3 && task != NULL);
+	if (task != NULL)
+		mvs_free_task(task);
+	return res;
+}
+
+static int mvs_debug_issue_ssp_tmf(struct domain_device *dev,
+				u8 *lun, struct mvs_tmf_task *tmf)
+{
+	struct sas_ssp_task ssp_task;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	if (!(dev->tproto & SAS_PROTOCOL_SSP))
+		return TMF_RESP_FUNC_ESUPP;
+
+	strncpy((u8 *)&ssp_task.LUN, lun, 8);
+
+	return mvs_exec_internal_tmf_task(dev, &ssp_task,
+				sizeof(ssp_task), tmf);
+}
+
+
+/*  Standard mandates link reset for ATA  (type 0)
+    and hard reset for SSP (type 1) , only for RECOVERY */
+static int mvs_debug_I_T_nexus_reset(struct domain_device *dev)
+{
+	int rc;
+	struct sas_phy *phy = sas_find_local_phy(dev);
+	int reset_type = (dev->dev_type == SATA_DEV ||
+			(dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+	rc = sas_phy_reset(phy, reset_type);
+	msleep(2000);
+	return rc;
+}
+
+/* mandatory SAM-3 */
+int mvs_lu_reset(struct domain_device *dev, u8 *lun)
+{
+	unsigned long flags;
+	int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+	struct mvs_device * mvi_dev = dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	tmf_task.tmf = TMF_LU_RESET;
+	mvi_dev->dev_status = MVS_DEV_EH;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+	if (rc == TMF_RESP_FUNC_COMPLETE) {
+		num = mvs_find_dev_phyno(dev, phyno);
+		spin_lock_irqsave(&mvi->lock, flags);
+		for (i = 0; i < num; i++)
+			mvs_release_task(mvi, phyno[i], dev);
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	}
+	/* If failed, fall-through I_T_Nexus reset */
+	mv_printk("%s for device[%x]:rc= %d\n", __func__,
+			mvi_dev->device_id, rc);
+	return rc;
+}
+
+int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+	unsigned long flags;
+	int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_device * mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+
+	if (mvi_dev->dev_status != MVS_DEV_EH)
+		return TMF_RESP_FUNC_COMPLETE;
+	rc = mvs_debug_I_T_nexus_reset(dev);
+	mv_printk("%s for device[%x]:rc= %d\n",
+		__func__, mvi_dev->device_id, rc);
+
+	/* housekeeper */
+	num = mvs_find_dev_phyno(dev, phyno);
+	spin_lock_irqsave(&mvi->lock, flags);
+	for (i = 0; i < num; i++)
+		mvs_release_task(mvi, phyno[i], dev);
+	spin_unlock_irqrestore(&mvi->lock, flags);
+
+	return rc;
+}
+/* optional SAM-3 */
+int mvs_query_task(struct sas_task *task)
+{
+	u32 tag;
+	struct scsi_lun lun;
+	struct mvs_tmf_task tmf_task;
+	int rc = TMF_RESP_FUNC_FAILED;
+
+	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+		struct domain_device *dev = task->dev;
+		struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+		struct mvs_info *mvi = mvi_dev->mvi_info;
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = mvs_find_tag(mvi, task, &tag);
+		if (rc == 0) {
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+
+		tmf_task.tmf = TMF_QUERY_TASK;
+		tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+		rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+		switch (rc) {
+		/* The task is still in Lun, release it then */
+		case TMF_RESP_FUNC_SUCC:
+		/* The task is not in Lun or failed, reset the phy */
+		case TMF_RESP_FUNC_FAILED:
+		case TMF_RESP_FUNC_COMPLETE:
+			break;
+		}
+	}
+	mv_printk("%s:rc= %d\n", __func__, rc);
+	return rc;
+}
+
+/*  mandatory SAM-3, still need free task/slot info */
+int mvs_abort_task(struct sas_task *task)
+{
+	struct scsi_lun lun;
+	struct mvs_tmf_task tmf_task;
+	struct domain_device *dev = task->dev;
+	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+	struct mvs_info *mvi = mvi_dev->mvi_info;
+	int rc = TMF_RESP_FUNC_FAILED;
+	unsigned long flags;
+	u32 tag;
+
+	if (mvi->exp_req)
+		mvi->exp_req--;
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		rc = TMF_RESP_FUNC_COMPLETE;
+		goto out;
+	}
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = mvs_find_tag(mvi, task, &tag);
+		if (rc == 0) {
+			mv_printk("No such tag in %s\n", __func__);
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+
+		tmf_task.tmf = TMF_ABORT_TASK;
+		tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+		rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+
+		/* if successful, clear the task and callback forwards.*/
+		if (rc == TMF_RESP_FUNC_COMPLETE) {
+			u32 slot_no;
+			struct mvs_slot_info *slot;
+
+			if (task->lldd_task) {
+				slot = task->lldd_task;
+				slot_no = (u32) (slot - mvi->slot_info);
+				mvs_slot_complete(mvi, slot_no, 1);
+			}
+		}
+	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
+		task->task_proto & SAS_PROTOCOL_STP) {
+		/* to do free register_set */
+	} else {
+		/* SMP */
+
+	}
+out:
+	if (rc != TMF_RESP_FUNC_COMPLETE)
+		mv_printk("%s:rc= %d\n", __func__, rc);
+	return rc;
+}
+
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_ABORT_TASK_SET;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int mvs_clear_aca(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_ACA;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int mvs_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct mvs_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_TASK_SET;
+	rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+			u32 slot_idx, int err)
+{
+	struct mvs_device *mvi_dev = task->dev->lldd_dev;
+	struct task_status_struct *tstat = &task->task_status;
+	struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+	int stat = SAM_GOOD;
+
+
+	resp->frame_len = sizeof(struct dev_to_host_fis);
+	memcpy(&resp->ending_fis[0],
+	       SATA_RECEIVED_D2H_FIS(mvi_dev->taskfileset),
+	       sizeof(struct dev_to_host_fis));
+	tstat->buf_valid_size = sizeof(*resp);
+	if (unlikely(err))
+		stat = SAS_PROTO_RESPONSE;
+	return stat;
+}
+
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+			 u32 slot_idx)
+{
+	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+	int stat;
+	u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+	u32 tfs = 0;
+	enum mvs_port_type type = PORT_TYPE_SAS;
+
+	if (err_dw0 & CMD_ISS_STPD)
+		MVS_CHIP_DISP->issue_stop(mvi, type, tfs);
+
+	MVS_CHIP_DISP->command_active(mvi, slot_idx);
+
+	stat = SAM_CHECK_COND;
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		stat = SAS_ABORTED_TASK;
+		break;
+	case SAS_PROTOCOL_SMP:
+		stat = SAM_CHECK_COND;
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+	{
+		if (err_dw0 == 0x80400002)
+			mv_printk("find reserved error, why?\n");
+
+		task->ata_task.use_ncq = 0;
+		stat = SAS_PROTO_RESPONSE;
+		mvs_sata_done(mvi, task, slot_idx, 1);
+
+	}
+		break;
+	default:
+		break;
+	}
+
+	return stat;
+}
+
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
+{
+	u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+	struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+	struct sas_task *task = slot->task;
+	struct mvs_device *mvi_dev = NULL;
+	struct task_status_struct *tstat;
+
+	bool aborted;
+	void *to;
+	enum exec_status sts;
+
+	if (mvi->exp_req)
+		mvi->exp_req--;
+	if (unlikely(!task || !task->lldd_task))
+		return -1;
+
+	tstat = &task->task_status;
+	mvi_dev = task->dev->lldd_dev;
+
+	mvs_hba_cq_dump(mvi);
+
+	spin_lock(&task->task_state_lock);
+	task->task_state_flags &=
+		~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+	task->task_state_flags |= SAS_TASK_STATE_DONE;
+	/* race condition*/
+	aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
+	spin_unlock(&task->task_state_lock);
+
+	memset(tstat, 0, sizeof(*tstat));
+	tstat->resp = SAS_TASK_COMPLETE;
+
+	if (unlikely(aborted)) {
+		tstat->stat = SAS_ABORTED_TASK;
+		if (mvi_dev)
+			mvi_dev->runing_req--;
+		if (sas_protocol_ata(task->task_proto))
+			mvs_free_reg_set(mvi, mvi_dev);
+
+		mvs_slot_task_free(mvi, task, slot, slot_idx);
+		return -1;
+	}
+
+	if (unlikely(!mvi_dev || !slot->port->port_attached || flags)) {
+		mv_dprintk("port has not device.\n");
+		tstat->stat = SAS_PHY_DOWN;
+		goto out;
+	}
+
+	/*
+	if (unlikely((rx_desc & RXQ_ERR) || (*(u64 *) slot->response))) {
+		 mv_dprintk("Find device[%016llx] RXQ_ERR %X,
+		 err info:%016llx\n",
+		 SAS_ADDR(task->dev->sas_addr),
+		 rx_desc, (u64)(*(u64 *) slot->response));
+	}
+	*/
+
+	/* error info record present */
+	if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+		tstat->stat = mvs_slot_err(mvi, task, slot_idx);
+		goto out;
+	}
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SSP:
+		/* hw says status == 0, datapres == 0 */
+		if (rx_desc & RXQ_GOOD) {
+			tstat->stat = SAM_GOOD;
+			tstat->resp = SAS_TASK_COMPLETE;
+		}
+		/* response frame present */
+		else if (rx_desc & RXQ_RSP) {
+			struct ssp_response_iu *iu = slot->response +
+						sizeof(struct mvs_err_info);
+			sas_ssp_task_response(mvi->dev, task, iu);
+		} else
+			tstat->stat = SAM_CHECK_COND;
+		break;
+
+	case SAS_PROTOCOL_SMP: {
+			struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+			tstat->stat = SAM_GOOD;
+			to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
+			memcpy(to + sg_resp->offset,
+				slot->response + sizeof(struct mvs_err_info),
+				sg_dma_len(sg_resp));
+			kunmap_atomic(to, KM_IRQ0);
+			break;
+		}
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
+			tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
+			break;
+		}
+
+	default:
+		tstat->stat = SAM_CHECK_COND;
+		break;
+	}
+
+out:
+	if (mvi_dev) {
+		mvi_dev->runing_req--;
+		if (sas_protocol_ata(task->task_proto))
+			mvs_free_reg_set(mvi, mvi_dev);
+	}
+	mvs_slot_task_free(mvi, task, slot, slot_idx);
+	sts = tstat->stat;
+
+	spin_unlock(&mvi->lock);
+	if (task->task_done)
+		task->task_done(task);
+	else
+		mv_dprintk("why has not task_done.\n");
+	spin_lock(&mvi->lock);
+
+	return sts;
+}
+
+void mvs_release_task(struct mvs_info *mvi,
+		int phy_no, struct domain_device *dev)
+{
+	int i = 0; u32 slot_idx;
+	struct mvs_phy *phy;
+	struct mvs_port *port;
+	struct mvs_slot_info *slot, *slot2;
+
+	phy = &mvi->phy[phy_no];
+	port = phy->port;
+	if (!port)
+		return;
+
+	list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+		struct sas_task *task;
+		slot_idx = (u32) (slot - mvi->slot_info);
+		task = slot->task;
+
+		if (dev && task->dev != dev)
+			continue;
+
+		mv_printk("Release slot [%x] tag[%x], task [%p]:\n",
+			slot_idx, slot->slot_tag, task);
+
+		if (task->task_proto & SAS_PROTOCOL_SSP) {
+			mv_printk("attached with SSP task CDB[");
+			for (i = 0; i < 16; i++)
+				mv_printk(" %02x", task->ssp_task.cdb[i]);
+			mv_printk(" ]\n");
+		}
+
+		mvs_slot_complete(mvi, slot_idx, 1);
+	}
+}
+
+static void mvs_phy_disconnected(struct mvs_phy *phy)
+{
+	phy->phy_attached = 0;
+	phy->att_dev_info = 0;
+	phy->att_dev_sas_addr = 0;
+}
+
+static void mvs_work_queue(struct work_struct *work)
+{
+	struct delayed_work *dw = container_of(work, struct delayed_work, work);
+	struct mvs_wq *mwq = container_of(dw, struct mvs_wq, work_q);
+	struct mvs_info *mvi = mwq->mvi;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	if (mwq->handler & PHY_PLUG_EVENT) {
+		u32 phy_no = (unsigned long) mwq->data;
+		struct sas_ha_struct *sas_ha = mvi->sas;
+		struct mvs_phy *phy = &mvi->phy[phy_no];
+		struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+		if (phy->phy_event & PHY_PLUG_OUT) {
+			u32 tmp;
+			struct sas_identify_frame *id;
+			id = (struct sas_identify_frame *)phy->frame_rcvd;
+			tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no);
+			phy->phy_event &= ~PHY_PLUG_OUT;
+			if (!(tmp & PHY_READY_MASK)) {
+				sas_phy_disconnected(sas_phy);
+				mvs_phy_disconnected(phy);
+				sas_ha->notify_phy_event(sas_phy,
+					PHYE_LOSS_OF_SIGNAL);
+				mv_dprintk("phy%d Removed Device\n", phy_no);
+			} else {
+				MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+				mvs_update_phyinfo(mvi, phy_no, 1);
+				mvs_bytes_dmaed(mvi, phy_no);
+				mvs_port_notify_formed(sas_phy, 0);
+				mv_dprintk("phy%d Attached Device\n", phy_no);
+			}
+		}
+	}
+	list_del(&mwq->entry);
+	spin_unlock_irqrestore(&mvi->lock, flags);
+	kfree(mwq);
+}
+
+static int mvs_handle_event(struct mvs_info *mvi, void *data, int handler)
+{
+	struct mvs_wq *mwq;
+	int ret = 0;
+
+	mwq = kmalloc(sizeof(struct mvs_wq), GFP_ATOMIC);
+	if (mwq) {
+		mwq->mvi = mvi;
+		mwq->data = data;
+		mwq->handler = handler;
+		MV_INIT_DELAYED_WORK(&mwq->work_q, mvs_work_queue, mwq);
+		list_add_tail(&mwq->entry, &mvi->wq_list);
+		schedule_delayed_work(&mwq->work_q, HZ * 2);
+	} else
+		ret = -ENOMEM;
+
+	return ret;
+}
+
+static void mvs_sig_time_out(unsigned long tphy)
+{
+	struct mvs_phy *phy = (struct mvs_phy *)tphy;
+	struct mvs_info *mvi = phy->mvi;
+	u8 phy_no;
+
+	for (phy_no = 0; phy_no < mvi->chip->n_phy; phy_no++) {
+		if (&mvi->phy[phy_no] == phy) {
+			mv_dprintk("Get signature time out, reset phy %d\n",
+				phy_no+mvi->id*mvi->chip->n_phy);
+			MVS_CHIP_DISP->phy_reset(mvi, phy_no, 1);
+		}
+	}
+}
+
+static void mvs_sig_remove_timer(struct mvs_phy *phy)
+{
+	if (phy->timer.function)
+		del_timer(&phy->timer);
+	phy->timer.function = NULL;
+}
+
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
+{
+	u32 tmp;
+	struct sas_ha_struct *sas_ha = mvi->sas;
+	struct mvs_phy *phy = &mvi->phy[phy_no];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+	phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, phy_no);
+	mv_dprintk("port %d ctrl sts=0x%X.\n", phy_no+mvi->id*mvi->chip->n_phy,
+		MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no));
+	mv_dprintk("Port %d irq sts = 0x%X\n", phy_no+mvi->id*mvi->chip->n_phy,
+		phy->irq_status);
+
+	/*
+	* events is port event now ,
+	* we need check the interrupt status which belongs to per port.
+	*/
+
+	if (phy->irq_status & PHYEV_DCDR_ERR)
+		mv_dprintk("port %d STP decoding error.\n",
+		phy_no+mvi->id*mvi->chip->n_phy);
+
+	if (phy->irq_status & PHYEV_POOF) {
+		if (!(phy->phy_event & PHY_PLUG_OUT)) {
+			int dev_sata = phy->phy_type & PORT_TYPE_SATA;
+			int ready;
+			mvs_release_task(mvi, phy_no, NULL);
+			phy->phy_event |= PHY_PLUG_OUT;
+			mvs_handle_event(mvi,
+				(void *)(unsigned long)phy_no,
+				PHY_PLUG_EVENT);
+			ready = mvs_is_phy_ready(mvi, phy_no);
+			if (!ready)
+				mv_dprintk("phy%d Unplug Notice\n",
+					phy_no +
+					mvi->id * mvi->chip->n_phy);
+			if (ready || dev_sata) {
+				if (MVS_CHIP_DISP->stp_reset)
+					MVS_CHIP_DISP->stp_reset(mvi,
+							phy_no);
+				else
+					MVS_CHIP_DISP->phy_reset(mvi,
+							phy_no, 0);
+				return;
+			}
+		}
+	}
+
+	if (phy->irq_status & PHYEV_COMWAKE) {
+		tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, phy_no);
+		MVS_CHIP_DISP->write_port_irq_mask(mvi, phy_no,
+					tmp | PHYEV_SIG_FIS);
+		if (phy->timer.function == NULL) {
+			phy->timer.data = (unsigned long)phy;
+			phy->timer.function = mvs_sig_time_out;
+			phy->timer.expires = jiffies + 10*HZ;
+			add_timer(&phy->timer);
+		}
+	}
+	if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
+		phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
+		mvs_sig_remove_timer(phy);
+		mv_dprintk("notify plug in on phy[%d]\n", phy_no);
+		if (phy->phy_status) {
+			mdelay(10);
+			MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+			if (phy->phy_type & PORT_TYPE_SATA) {
+				tmp = MVS_CHIP_DISP->read_port_irq_mask(
+						mvi, phy_no);
+				tmp &= ~PHYEV_SIG_FIS;
+				MVS_CHIP_DISP->write_port_irq_mask(mvi,
+							phy_no, tmp);
+			}
+			mvs_update_phyinfo(mvi, phy_no, 0);
+			mvs_bytes_dmaed(mvi, phy_no);
+			/* whether driver is going to handle hot plug */
+			if (phy->phy_event & PHY_PLUG_OUT) {
+				mvs_port_notify_formed(sas_phy, 0);
+				phy->phy_event &= ~PHY_PLUG_OUT;
+			}
+		} else {
+			mv_dprintk("plugin interrupt but phy%d is gone\n",
+				phy_no + mvi->id*mvi->chip->n_phy);
+		}
+	} else if (phy->irq_status & PHYEV_BROAD_CH) {
+		mv_dprintk("port %d broadcast change.\n",
+			phy_no + mvi->id*mvi->chip->n_phy);
+		/* exception for Samsung disk drive*/
+		mdelay(1000);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+	}
+	MVS_CHIP_DISP->write_port_irq_stat(mvi, phy_no, phy->irq_status);
+}
+
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
+{
+	u32 rx_prod_idx, rx_desc;
+	bool attn = false;
+
+	/* the first dword in the RX ring is special: it contains
+	 * a mirror of the hardware's RX producer index, so that
+	 * we don't have to stall the CPU reading that register.
+	 * The actual RX ring is offset by one dword, due to this.
+	 */
+	rx_prod_idx = mvi->rx_cons;
+	mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+	if (mvi->rx_cons == 0xfff)	/* h/w hasn't touched RX ring yet */
+		return 0;
+
+	/* The CMPL_Q may come late, read from register and try again
+	* note: if coalescing is enabled,
+	* it will need to read from register every time for sure
+	*/
+	if (unlikely(mvi->rx_cons == rx_prod_idx))
+		mvi->rx_cons = MVS_CHIP_DISP->rx_update(mvi) & RX_RING_SZ_MASK;
+
+	if (mvi->rx_cons == rx_prod_idx)
+		return 0;
+
+	while (mvi->rx_cons != rx_prod_idx) {
+		/* increment our internal RX consumer pointer */
+		rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
+		rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
+
+		if (likely(rx_desc & RXQ_DONE))
+			mvs_slot_complete(mvi, rx_desc, 0);
+		if (rx_desc & RXQ_ATTN) {
+			attn = true;
+		} else if (rx_desc & RXQ_ERR) {
+			if (!(rx_desc & RXQ_DONE))
+				mvs_slot_complete(mvi, rx_desc, 0);
+		} else if (rx_desc & RXQ_SLOT_RESET) {
+			mvs_slot_free(mvi, rx_desc);
+		}
+	}
+
+	if (attn && self_clear)
+		MVS_CHIP_DISP->int_full(mvi);
+	return 0;
+}
+
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
new file mode 100644
index 00000000000..aa2270af1ba
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -0,0 +1,406 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/version.h>
+#include "mv_defs.h"
+
+#define DRV_NAME		"mvsas"
+#define DRV_VERSION		"0.8.2"
+#define _MV_DUMP		0
+#define MVS_ID_NOT_MAPPED	0x7f
+/* #define DISABLE_HOTPLUG_DMA_FIX */
+#define MAX_EXP_RUNNING_REQ	2
+#define WIDE_PORT_MAX_PHY		4
+#define	MV_DISABLE_NCQ	0
+#define mv_printk(fmt, arg ...)	\
+	printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg)
+#ifdef MV_DEBUG
+#define mv_dprintk(format, arg...)	\
+	printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg)
+#else
+#define mv_dprintk(format, arg...)
+#endif
+#define MV_MAX_U32			0xffffffff
+
+extern struct mvs_tgt_initiator mvs_tgt;
+extern struct mvs_info *tgt_mvi;
+extern const struct mvs_dispatch mvs_64xx_dispatch;
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+
+#define DEV_IS_EXPANDER(type)	\
+	((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define bit(n) ((u32)1 << n)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq)			\
+	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\
+					(__mc) != 0 ;		\
+					(++__lseq), (__mc) >>= 1)
+
+#define MV_INIT_DELAYED_WORK(w, f, d)	INIT_DELAYED_WORK(w, f)
+#define UNASSOC_D2H_FIS(id)		\
+	((void *) mvi->rx_fis + 0x100 * id)
+#define SATA_RECEIVED_FIS_LIST(reg_set)	\
+	((void *) mvi->rx_fis + mvi->chip->fis_offs + 0x100 * reg_set)
+#define SATA_RECEIVED_SDB_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x58)
+#define SATA_RECEIVED_D2H_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x40)
+#define SATA_RECEIVED_PIO_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x20)
+#define SATA_RECEIVED_DMA_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x00)
+
+enum dev_status {
+	MVS_DEV_NORMAL = 0x0,
+	MVS_DEV_EH	= 0x1,
+};
+
+
+struct mvs_info;
+
+struct mvs_dispatch {
+	char *name;
+	int (*chip_init)(struct mvs_info *mvi);
+	int (*spi_init)(struct mvs_info *mvi);
+	int (*chip_ioremap)(struct mvs_info *mvi);
+	void (*chip_iounmap)(struct mvs_info *mvi);
+	irqreturn_t (*isr)(struct mvs_info *mvi, int irq, u32 stat);
+	u32 (*isr_status)(struct mvs_info *mvi, int irq);
+	void (*interrupt_enable)(struct mvs_info *mvi);
+	void (*interrupt_disable)(struct mvs_info *mvi);
+
+	u32 (*read_phy_ctl)(struct mvs_info *mvi, u32 port);
+	void (*write_phy_ctl)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_cfg_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_cfg_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_cfg_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_vsr_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_vsr_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_vsr_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_irq_stat)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_stat)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_irq_mask)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_mask)(struct mvs_info *mvi, u32 port, u32 val);
+
+	void (*get_sas_addr)(void *buf, u32 buflen);
+	void (*command_active)(struct mvs_info *mvi, u32 slot_idx);
+	void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs);
+	void (*start_delivery)(struct mvs_info *mvi, u32 tx);
+	u32 (*rx_update)(struct mvs_info *mvi);
+	void (*int_full)(struct mvs_info *mvi);
+	u8 (*assign_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	void (*free_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	u32 (*prd_size)(void);
+	u32 (*prd_count)(void);
+	void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+	void (*detect_porttype)(struct mvs_info *mvi, int i);
+	int (*oob_done)(struct mvs_info *mvi, int i);
+	void (*fix_phy_info)(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id);
+	void (*phy_work_around)(struct mvs_info *mvi, int i);
+	void (*phy_set_link_rate)(struct mvs_info *mvi, u32 phy_id,
+				struct sas_phy_linkrates *rates);
+	u32 (*phy_max_link_rate)(void);
+	void (*phy_disable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_enable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_reset)(struct mvs_info *mvi, u32 phy_id, int hard);
+	void (*stp_reset)(struct mvs_info *mvi, u32 phy_id);
+	void (*clear_active_cmds)(struct mvs_info *mvi);
+	u32 (*spi_read_data)(struct mvs_info *mvi);
+	void (*spi_write_data)(struct mvs_info *mvi, u32 data);
+	int (*spi_buildcmd)(struct mvs_info *mvi,
+						u32      *dwCmd,
+						u8       cmd,
+						u8       read,
+						u8       length,
+						u32      addr
+						);
+	int (*spi_issuecmd)(struct mvs_info *mvi, u32 cmd);
+	int (*spi_waitdataready)(struct mvs_info *mvi, u32 timeout);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	void (*dma_fix)(dma_addr_t buf_dma, int buf_len, int from, void *prd);
+#endif
+
+};
+
+struct mvs_chip_info {
+	u32 		n_host;
+	u32 		n_phy;
+	u32 		fis_offs;
+	u32 		fis_count;
+	u32 		srs_sz;
+	u32 		slot_width;
+	const struct mvs_dispatch *dispatch;
+};
+#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
+#define MVS_RX_FISL_SZ		\
+	(mvi->chip->fis_offs + (mvi->chip->fis_count * 0x100))
+#define MVS_CHIP_DISP		(mvi->chip->dispatch)
+
+struct mvs_err_info {
+	__le32			flags;
+	__le32			flags2;
+};
+
+struct mvs_cmd_hdr {
+	__le32			flags;	/* PRD tbl len; SAS, SATA ctl */
+	__le32			lens;	/* cmd, max resp frame len */
+	__le32			tags;	/* targ port xfer tag; tag */
+	__le32			data_len;	/* data xfer len */
+	__le64			cmd_tbl;  	/* command table address */
+	__le64			open_frame;	/* open addr frame address */
+	__le64			status_buf;	/* status buffer address */
+	__le64			prd_tbl;		/* PRD tbl address */
+	__le32			reserved[4];
+};
+
+struct mvs_port {
+	struct asd_sas_port	sas_port;
+	u8			port_attached;
+	u8			wide_port_phymap;
+	struct list_head	list;
+};
+
+struct mvs_phy {
+	struct mvs_info 		*mvi;
+	struct mvs_port		*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	struct timer_list timer;
+	u64		dev_sas_addr;
+	u64		att_dev_sas_addr;
+	u32		att_dev_info;
+	u32		dev_info;
+	u32		phy_type;
+	u32		phy_status;
+	u32		irq_status;
+	u32		frame_rcvd_size;
+	u8		frame_rcvd[32];
+	u8		phy_attached;
+	u8		phy_mode;
+	u8		reserved[2];
+	u32		phy_event;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct mvs_device {
+	struct list_head		dev_entry;
+	enum sas_dev_type dev_type;
+	struct mvs_info *mvi_info;
+	struct domain_device *sas_device;
+	u32 attached_phy;
+	u32 device_id;
+	u32 runing_req;
+	u8 taskfileset;
+	u8 dev_status;
+	u16 reserved;
+};
+
+struct mvs_slot_info {
+	struct list_head entry;
+	union {
+		struct sas_task *task;
+		void *tdata;
+	};
+	u32 n_elem;
+	u32 tx;
+	u32 slot_tag;
+
+	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+	 * and PRD table
+	 */
+	void *buf;
+	dma_addr_t buf_dma;
+#if _MV_DUMP
+	u32 cmd_size;
+#endif
+	void *response;
+	struct mvs_port *port;
+	struct mvs_device	*device;
+	void *open_frame;
+};
+
+struct mvs_info {
+	unsigned long flags;
+
+	/* host-wide lock */
+	spinlock_t lock;
+
+	/* our device */
+	struct pci_dev *pdev;
+	struct device *dev;
+
+	/* enhanced mode registers */
+	void __iomem *regs;
+
+	/* peripheral or soc registers */
+	void __iomem *regs_ex;
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* SCSI/SAS glue */
+	struct sas_ha_struct *sas;
+	struct Scsi_Host *shost;
+
+	/* TX (delivery) DMA ring */
+	__le32 *tx;
+	dma_addr_t tx_dma;
+
+	/* cached next-producer idx */
+	u32 tx_prod;
+
+	/* RX (completion) DMA ring */
+	__le32	*rx;
+	dma_addr_t rx_dma;
+
+	/* RX consumer idx */
+	u32 rx_cons;
+
+	/* RX'd FIS area */
+	__le32 *rx_fis;
+	dma_addr_t rx_fis_dma;
+
+	/* DMA command header slots */
+	struct mvs_cmd_hdr *slot;
+	dma_addr_t slot_dma;
+
+	u32 chip_id;
+	const struct mvs_chip_info *chip;
+
+	int tags_num;
+	DECLARE_BITMAP(tags, MVS_SLOTS);
+	/* further per-slot information */
+	struct mvs_phy phy[MVS_MAX_PHYS];
+	struct mvs_port port[MVS_MAX_PHYS];
+	u32 irq;
+	u32 exp_req;
+	u32 id;
+	u64 sata_reg_set;
+	struct list_head *hba_list;
+	struct list_head soc_entry;
+	struct list_head wq_list;
+	unsigned long instance;
+	u16 flashid;
+	u32 flashsize;
+	u32 flashsectSize;
+
+	void *addon;
+	struct mvs_device	devices[MVS_MAX_DEVICES];
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+	void *bulk_buffer;
+	dma_addr_t bulk_buffer_dma;
+#define TRASH_BUCKET_SIZE    	0x20000
+#endif
+	struct mvs_slot_info slot_info[0];
+};
+
+struct mvs_prv_info{
+	u8 n_host;
+	u8 n_phy;
+	u16 reserve;
+	struct mvs_info *mvi[2];
+};
+
+struct mvs_wq {
+	struct delayed_work work_q;
+	struct mvs_info *mvi;
+	void *data;
+	int handler;
+	struct list_head entry;
+};
+
+struct mvs_task_exec_info {
+	struct sas_task *task;
+	struct mvs_cmd_hdr *hdr;
+	struct mvs_port *port;
+	u32 tag;
+	int n_elem;
+};
+
+
+/******************** function prototype *********************/
+void mvs_get_sas_addr(void *buf, u32 buflen);
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
+void mvs_tag_free(struct mvs_info *mvi, u32 tag);
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag);
+int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out);
+void mvs_tag_init(struct mvs_info *mvi);
+void mvs_iounmap(void __iomem *regs);
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex);
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard);
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata);
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+				u32 off_lo, u32 off_hi, u64 sas_addr);
+int mvs_slave_alloc(struct scsi_device *scsi_dev);
+int mvs_slave_configure(struct scsi_device *sdev);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_queue_command(struct sas_task *task, const int num,
+			gfp_t gfp_flags);
+int mvs_abort_task(struct sas_task *task);
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
+int mvs_clear_aca(struct domain_device *dev, u8 *lun);
+int mvs_clear_task_set(struct domain_device *dev, u8 * lun);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+void mvs_port_deformed(struct asd_sas_phy *sas_phy);
+int mvs_dev_found(struct domain_device *dev);
+void mvs_dev_gone(struct domain_device *dev);
+int mvs_lu_reset(struct domain_device *dev, u8 *lun);
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+int mvs_query_task(struct sas_task *task);
+void mvs_release_task(struct mvs_info *mvi, int phy_no,
+			struct domain_device *dev);
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr);
+#endif
+
diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild
index 0e207aa67d1..5fd73d77c3a 100644
--- a/drivers/scsi/osd/Kbuild
+++ b/drivers/scsi/osd/Kbuild
@@ -11,31 +11,6 @@
 # it under the terms of the GNU General Public License version 2
 #
 
-ifneq ($(OSD_INC),)
-# we are built out-of-tree Kconfigure everything as on
-
-CONFIG_SCSI_OSD_INITIATOR=m
-ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE
-
-CONFIG_SCSI_OSD_ULD=m
-ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE
-
-# CONFIG_SCSI_OSD_DPRINT_SENSE =
-#	0 - no print of errors
-#	1 - print errors
-#	2 - errors + warrnings
-ccflags-y += -DCONFIG_SCSI_OSD_DPRINT_SENSE=1
-
-# Uncomment to turn debug on
-# ccflags-y += -DCONFIG_SCSI_OSD_DEBUG
-
-# if we are built out-of-tree and the hosting kernel has OSD headers
-# then "ccflags-y +=" will not pick the out-off-tree headers. Only by doing
-# this it will work. This might break in future kernels
-LINUXINCLUDE := -I$(OSD_INC) $(LINUXINCLUDE)
-
-endif
-
 # libosd.ko - osd-initiator library
 libosd-y := osd_initiator.o
 obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o
diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile
deleted file mode 100755
index d905344f83b..00000000000
--- a/drivers/scsi/osd/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Makefile for the OSD modules (out of tree)
-#
-# Copyright (C) 2008 Panasas Inc.  All rights reserved.
-#
-# Authors:
-#   Boaz Harrosh <bharrosh@panasas.com>
-#   Benny Halevy <bhalevy@panasas.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2
-#
-# This Makefile is used to call the kernel Makefile in case of an out-of-tree
-# build.
-# $KSRC should point to a Kernel source tree otherwise host's default is
-# used. (eg. /lib/modules/`uname -r`/build)
-
-# include path for out-of-tree Headers
-OSD_INC ?= `pwd`/../../../include
-
-# allow users to override these
-# e.g. to compile for a kernel that you aren't currently running
-KSRC ?= /lib/modules/$(shell uname -r)/build
-KBUILD_OUTPUT ?=
-ARCH ?=
-V ?= 0
-
-# this is the basic Kbuild out-of-tree invocation, with the M= option
-KBUILD_BASE = +$(MAKE) -C $(KSRC) M=`pwd` KBUILD_OUTPUT=$(KBUILD_OUTPUT) ARCH=$(ARCH) V=$(V)
-
-all: libosd
-
-libosd: ;
-	$(KBUILD_BASE) OSD_INC=$(OSD_INC) modules
-
-clean:
-	$(KBUILD_BASE) clean
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 1ce6b24abab..7a117c18114 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -118,39 +118,39 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps)
 		_osd_ver_desc(or));
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_VENDOR_IDENTIFICATION [%s]\n",
+	OSD_INFO("VENDOR_IDENTIFICATION  [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_IDENTIFICATION [%s]\n",
+	OSD_INFO("PRODUCT_IDENTIFICATION [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_MODEL [%s]\n",
+	OSD_INFO("PRODUCT_MODEL          [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n",
+	OSD_INFO("PRODUCT_REVISION_LEVEL [%u]\n",
 		pFirst ? get_unaligned_be32(pFirst) : ~0U);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n",
+	OSD_INFO("PRODUCT_SERIAL_NUMBER  [%s]\n",
 		(char *)pFirst);
 
 	pFirst = get_attrs[a].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_OSD_NAME [%s]\n", (char *)pFirst);
+	OSD_INFO("OSD_NAME               [%s]\n", (char *)pFirst);
 	a++;
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n",
+	OSD_INFO("TOTAL_CAPACITY         [0x%llx]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n",
+	OSD_INFO("USED_CAPACITY          [0x%llx]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n",
+	OSD_INFO("NUMBER_OF_PARTITIONS   [%llu]\n",
 		pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
 
 	if (a >= nelem)
@@ -158,7 +158,7 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps)
 
 	/* FIXME: Where are the time utilities */
 	pFirst = get_attrs[a++].val_ptr;
-	OSD_INFO("OSD_ATTR_RI_CLOCK [0x%02x%02x%02x%02x%02x%02x]\n",
+	OSD_INFO("CLOCK                  [0x%02x%02x%02x%02x%02x%02x]\n",
 		((char *)pFirst)[0], ((char *)pFirst)[1],
 		((char *)pFirst)[2], ((char *)pFirst)[3],
 		((char *)pFirst)[4], ((char *)pFirst)[5]);
@@ -169,7 +169,8 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps)
 
 		hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1,
 				   sid_dump, sizeof(sid_dump), true);
-		OSD_INFO("OSD_ATTR_RI_OSD_SYSTEM_ID(%d) [%s]\n", len, sid_dump);
+		OSD_INFO("OSD_SYSTEM_ID(%d)\n"
+			 "        [%s]\n", len, sid_dump);
 		a++;
 	}
 out:
@@ -669,7 +670,7 @@ static int _osd_req_list_objects(struct osd_request *or,
 	__be16 action, const struct osd_obj_id *obj, osd_id initial_id,
 	struct osd_obj_id_list *list, unsigned nelem)
 {
-	struct request_queue *q = or->osd_dev->scsi_device->request_queue;
+	struct request_queue *q = osd_request_queue(or->osd_dev);
 	u64 len = nelem * sizeof(osd_id) + sizeof(*list);
 	struct bio *bio;
 
@@ -778,16 +779,32 @@ EXPORT_SYMBOL(osd_req_remove_object);
 */
 
 void osd_req_write(struct osd_request *or,
-	const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+	const struct osd_obj_id *obj, u64 offset,
+	struct bio *bio, u64 len)
 {
-	_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, bio->bi_size);
+	_osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len);
 	WARN_ON(or->out.bio || or->out.total_bytes);
-	bio->bi_rw |= (1 << BIO_RW);
+	WARN_ON(0 ==  bio_rw_flagged(bio, BIO_RW));
 	or->out.bio = bio;
-	or->out.total_bytes = bio->bi_size;
+	or->out.total_bytes = len;
 }
 EXPORT_SYMBOL(osd_req_write);
 
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+	struct request_queue *req_q = osd_request_queue(or->osd_dev);
+	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
+
+	bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+	osd_req_write(or, obj, offset, bio, len);
+	return 0;
+}
+EXPORT_SYMBOL(osd_req_write_kern);
+
 /*TODO: void osd_req_append(struct osd_request *,
 	const struct osd_obj_id *, struct bio *data_out); */
 /*TODO: void osd_req_create_write(struct osd_request *,
@@ -813,16 +830,31 @@ void osd_req_flush_object(struct osd_request *or,
 EXPORT_SYMBOL(osd_req_flush_object);
 
 void osd_req_read(struct osd_request *or,
-	const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+	const struct osd_obj_id *obj, u64 offset,
+	struct bio *bio, u64 len)
 {
-	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, bio->bi_size);
+	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
 	WARN_ON(or->in.bio || or->in.total_bytes);
-	bio->bi_rw &= ~(1 << BIO_RW);
+	WARN_ON(1 == bio_rw_flagged(bio, BIO_RW));
 	or->in.bio = bio;
-	or->in.total_bytes = bio->bi_size;
+	or->in.total_bytes = len;
 }
 EXPORT_SYMBOL(osd_req_read);
 
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+	struct request_queue *req_q = osd_request_queue(or->osd_dev);
+	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
+
+	osd_req_read(or, obj, offset, bio, len);
+	return 0;
+}
+EXPORT_SYMBOL(osd_req_read_kern);
+
 void osd_req_get_attributes(struct osd_request *or,
 	const struct osd_obj_id *obj)
 {
@@ -889,26 +921,6 @@ int osd_req_add_set_attr_list(struct osd_request *or,
 }
 EXPORT_SYMBOL(osd_req_add_set_attr_list);
 
-static int _append_map_kern(struct request *req,
-	void *buff, unsigned len, gfp_t flags)
-{
-	struct bio *bio;
-	int ret;
-
-	bio = bio_map_kern(req->q, buff, len, flags);
-	if (IS_ERR(bio)) {
-		OSD_ERR("Failed bio_map_kern(%p, %d) => %ld\n", buff, len,
-			PTR_ERR(bio));
-		return PTR_ERR(bio);
-	}
-	ret = blk_rq_append_bio(req->q, req, bio);
-	if (ret) {
-		OSD_ERR("Failed blk_rq_append_bio(%p) => %d\n", bio, ret);
-		bio_put(bio);
-	}
-	return ret;
-}
-
 static int _req_append_segment(struct osd_request *or,
 	unsigned padding, struct _osd_req_data_segment *seg,
 	struct _osd_req_data_segment *last_seg, struct _osd_io_info *io)
@@ -924,14 +936,14 @@ static int _req_append_segment(struct osd_request *or,
 		else
 			pad_buff = io->pad_buff;
 
-		ret = _append_map_kern(io->req, pad_buff, padding,
+		ret = blk_rq_map_kern(io->req->q, io->req, pad_buff, padding,
 				       or->alloc_flags);
 		if (ret)
 			return ret;
 		io->total_bytes += padding;
 	}
 
-	ret = _append_map_kern(io->req, seg->buff, seg->total_bytes,
+	ret = blk_rq_map_kern(io->req->q, io->req, seg->buff, seg->total_bytes,
 			       or->alloc_flags);
 	if (ret)
 		return ret;
@@ -1233,7 +1245,7 @@ static inline void osd_sec_parms_set_in_offset(bool is_v1,
 }
 
 static int _osd_req_finalize_data_integrity(struct osd_request *or,
-	bool has_in, bool has_out, const u8 *cap_key)
+	bool has_in, bool has_out, u64 out_data_bytes, const u8 *cap_key)
 {
 	struct osd_security_parameters *sec_parms = _osd_req_sec_params(or);
 	int ret;
@@ -1248,8 +1260,7 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
 		};
 		unsigned pad;
 
-		or->out_data_integ.data_bytes = cpu_to_be64(
-			or->out.bio ? or->out.bio->bi_size : 0);
+		or->out_data_integ.data_bytes = cpu_to_be64(out_data_bytes);
 		or->out_data_integ.set_attributes_bytes = cpu_to_be64(
 			or->set_attr.total_bytes);
 		or->out_data_integ.get_attributes_bytes = cpu_to_be64(
@@ -1293,6 +1304,21 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
 /*
  * osd_finalize_request and helpers
  */
+static struct request *_make_request(struct request_queue *q, bool has_write,
+			      struct _osd_io_info *oii, gfp_t flags)
+{
+	if (oii->bio)
+		return blk_make_request(q, oii->bio, flags);
+	else {
+		struct request *req;
+
+		req = blk_get_request(q, has_write ? WRITE : READ, flags);
+		if (unlikely(!req))
+			return ERR_PTR(-ENOMEM);
+
+		return req;
+	}
+}
 
 static int _init_blk_request(struct osd_request *or,
 	bool has_in, bool has_out)
@@ -1301,14 +1327,18 @@ static int _init_blk_request(struct osd_request *or,
 	struct scsi_device *scsi_device = or->osd_dev->scsi_device;
 	struct request_queue *q = scsi_device->request_queue;
 	struct request *req;
-	int ret = -ENOMEM;
+	int ret;
 
-	req = blk_get_request(q, has_out, flags);
-	if (!req)
+	req = _make_request(q, has_out, has_out ? &or->out : &or->in, flags);
+	if (IS_ERR(req)) {
+		ret = PTR_ERR(req);
 		goto out;
+	}
 
 	or->request = req;
 	req->cmd_type = REQ_TYPE_BLOCK_PC;
+	req->cmd_flags |= REQ_QUIET;
+
 	req->timeout = or->timeout;
 	req->retries = or->retries;
 	req->sense = or->sense;
@@ -1318,9 +1348,10 @@ static int _init_blk_request(struct osd_request *or,
 		or->out.req = req;
 		if (has_in) {
 			/* allocate bidi request */
-			req = blk_get_request(q, READ, flags);
-			if (!req) {
+			req = _make_request(q, false, &or->in, flags);
+			if (IS_ERR(req)) {
 				OSD_DEBUG("blk_get_request for bidi failed\n");
+				ret = PTR_ERR(req);
 				goto out;
 			}
 			req->cmd_type = REQ_TYPE_BLOCK_PC;
@@ -1341,6 +1372,7 @@ int osd_finalize_request(struct osd_request *or,
 {
 	struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb);
 	bool has_in, has_out;
+	u64 out_data_bytes = or->out.total_bytes;
 	int ret;
 
 	if (options & OSD_REQ_FUA)
@@ -1364,26 +1396,6 @@ int osd_finalize_request(struct osd_request *or,
 		return ret;
 	}
 
-	if (or->out.bio) {
-		ret = blk_rq_append_bio(or->request->q, or->out.req,
-					or->out.bio);
-		if (ret) {
-			OSD_DEBUG("blk_rq_append_bio out failed\n");
-			return ret;
-		}
-		OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n",
-			_LLU(or->out.total_bytes), or->out.req->data_len);
-	}
-	if (or->in.bio) {
-		ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio);
-		if (ret) {
-			OSD_DEBUG("blk_rq_append_bio in failed\n");
-			return ret;
-		}
-		OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n",
-			_LLU(or->in.total_bytes), or->in.req->data_len);
-	}
-
 	or->out.pad_buff = sg_out_pad_buffer;
 	or->in.pad_buff = sg_in_pad_buffer;
 
@@ -1410,7 +1422,8 @@ int osd_finalize_request(struct osd_request *or,
 		}
 	}
 
-	ret = _osd_req_finalize_data_integrity(or, has_in, has_out, cap_key);
+	ret = _osd_req_finalize_data_integrity(or, has_in, has_out,
+					       out_data_bytes, cap_key);
 	if (ret)
 		return ret;
 
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index 22b59e13ba8..0bdef339090 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -49,6 +49,7 @@
 #include <linux/device.h>
 #include <linux/idr.h>
 #include <linux/major.h>
+#include <linux/file.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_driver.h>
@@ -175,10 +176,9 @@ static const struct file_operations osd_fops = {
 
 struct osd_dev *osduld_path_lookup(const char *name)
 {
-	struct path path;
-	struct inode *inode;
-	struct cdev *cdev;
-	struct osd_uld_device *uninitialized_var(oud);
+	struct osd_uld_device *oud;
+	struct osd_dev *od;
+	struct file *file;
 	int error;
 
 	if (!name || !*name) {
@@ -186,52 +186,46 @@ struct osd_dev *osduld_path_lookup(const char *name)
 		return ERR_PTR(-EINVAL);
 	}
 
-	error = kern_path(name, LOOKUP_FOLLOW, &path);
-	if (error) {
-		OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
-		return ERR_PTR(error);
-	}
+	od = kzalloc(sizeof(*od), GFP_KERNEL);
+	if (!od)
+		return ERR_PTR(-ENOMEM);
 
-	inode = path.dentry->d_inode;
-	error = -EINVAL; /* Not the right device e.g osd_uld_device */
-	if (!S_ISCHR(inode->i_mode)) {
-		OSD_DEBUG("!S_ISCHR()\n");
-		goto out;
+	file = filp_open(name, O_RDWR, 0);
+	if (IS_ERR(file)) {
+		error = PTR_ERR(file);
+		goto free_od;
 	}
 
-	cdev = inode->i_cdev;
-	if (!cdev) {
-		OSD_ERR("Before mounting an OSD Based filesystem\n");
-		OSD_ERR("  user-mode must open+close the %s device\n", name);
-		OSD_ERR("  Example: bash: echo < %s\n", name);
-		goto out;
+	if (file->f_op != &osd_fops){
+		error = -EINVAL;
+		goto close_file;
 	}
 
-	/* The Magic wand. Is it our char-dev */
-	/* TODO: Support sg devices */
-	if (cdev->owner != THIS_MODULE) {
-		OSD_ERR("Error mounting %s - is not an OSD device\n", name);
-		goto out;
-	}
+	oud = file->private_data;
 
-	oud = container_of(cdev, struct osd_uld_device, cdev);
+	*od = oud->od;
+	od->file = file;
 
-	__uld_get(oud);
-	error = 0;
+	return od;
 
-out:
-	path_put(&path);
-	return error ? ERR_PTR(error) : &oud->od;
+close_file:
+	fput(file);
+free_od:
+	kfree(od);
+	return ERR_PTR(error);
 }
 EXPORT_SYMBOL(osduld_path_lookup);
 
 void osduld_put_device(struct osd_dev *od)
 {
-	if (od) {
-		struct osd_uld_device *oud = container_of(od,
-						struct osd_uld_device, od);
 
-		__uld_put(oud);
+	if (od && !IS_ERR(od)) {
+		struct osd_uld_device *oud = od->file->private_data;
+
+		BUG_ON(od->scsi_device != oud->od.scsi_device);
+
+		fput(od->file);
+		kfree(od);
 	}
 }
 EXPORT_SYMBOL(osduld_put_device);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5defe5ea5ed..8371d917a9a 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,12 @@
 * General Public License for more details.
 *
 ******************************************************************************/
-#define QLA1280_VERSION      "3.26"
+#define QLA1280_VERSION      "3.27"
 /*****************************************************************************
     Revision History:
+    Rev  3.27, February 10, 2009, Michael Reed
+	- General code cleanup.
+	- Improve error recovery.
     Rev  3.26, January 16, 2006 Jes Sorensen
 	- Ditch all < 2.6 support
     Rev  3.25.1, February 10, 2005 Christoph Hellwig
@@ -435,7 +438,6 @@ static int qla1280_mailbox_command(struct scsi_qla_host *,
 				   uint8_t, uint16_t *);
 static int qla1280_bus_reset(struct scsi_qla_host *, int);
 static int qla1280_device_reset(struct scsi_qla_host *, int, int);
-static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
 static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
 static int qla1280_abort_isp(struct scsi_qla_host *);
 #ifdef QLA_64BIT_PTR
@@ -698,7 +700,7 @@ qla1280_info(struct Scsi_Host *host)
 }
 
 /**************************************************************************
- *   qla1200_queuecommand
+ *   qla1280_queuecommand
  *     Queue a command to the controller.
  *
  * Note:
@@ -713,12 +715,14 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-	struct srb *sp = (struct srb *)&cmd->SCp;
+	struct srb *sp = (struct srb *)CMD_SP(cmd);
 	int status;
 
 	cmd->scsi_done = fn;
 	sp->cmd = cmd;
 	sp->flags = 0;
+	sp->wait = NULL;
+	CMD_HANDLE(cmd) = (unsigned char *)NULL;
 
 	qla1280_print_scsi_cmd(5, cmd);
 
@@ -738,21 +742,11 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 
 enum action {
 	ABORT_COMMAND,
-	ABORT_DEVICE,
 	DEVICE_RESET,
 	BUS_RESET,
 	ADAPTER_RESET,
-	FAIL
 };
 
-/* timer action for error action processor */
-static void qla1280_error_wait_timeout(unsigned long __data)
-{
-	struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
-	struct srb *sp = (struct srb *)CMD_SP(cmd);
-
-	complete(sp->wait);
-}
 
 static void qla1280_mailbox_timeout(unsigned long __data)
 {
@@ -767,8 +761,67 @@ static void qla1280_mailbox_timeout(unsigned long __data)
 	complete(ha->mailbox_wait);
 }
 
+static int
+_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
+				 struct completion *wait)
+{
+	int	status = FAILED;
+	struct scsi_cmnd *cmd = sp->cmd;
+
+	spin_unlock_irq(ha->host->host_lock);
+	wait_for_completion_timeout(wait, 4*HZ);
+	spin_lock_irq(ha->host->host_lock);
+	sp->wait = NULL;
+	if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
+		status = SUCCESS;
+		(*cmd->scsi_done)(cmd);
+	}
+	return status;
+}
+
+static int
+qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
+{
+	DECLARE_COMPLETION_ONSTACK(wait);
+
+	sp->wait = &wait;
+	return _qla1280_wait_for_single_command(ha, sp, &wait);
+}
+
+static int
+qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
+{
+	int		cnt;
+	int		status;
+	struct srb	*sp;
+	struct scsi_cmnd *cmd;
+
+	status = SUCCESS;
+
+	/*
+	 * Wait for all commands with the designated bus/target
+	 * to be completed by the firmware
+	 */
+	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = ha->outstanding_cmds[cnt];
+		if (sp) {
+			cmd = sp->cmd;
+
+			if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
+				continue;
+			if (target >= 0 && SCSI_TCN_32(cmd) != target)
+				continue;
+
+			status = qla1280_wait_for_single_command(ha, sp);
+			if (status == FAILED)
+				break;
+		}
+	}
+	return status;
+}
+
 /**************************************************************************
- * qla1200_error_action
+ * qla1280_error_action
  *    The function will attempt to perform a specified error action and
  *    wait for the results (or time out).
  *
@@ -780,11 +833,6 @@ static void qla1280_mailbox_timeout(unsigned long __data)
  * Returns:
  *      SUCCESS or FAILED
  *
- * Note:
- *      Resetting the bus always succeeds - is has to, otherwise the
- *      kernel will panic! Try a surgical technique - sending a BUS
- *      DEVICE RESET message - on the offending target before pulling
- *      the SCSI bus reset line.
  **************************************************************************/
 static int
 qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
@@ -792,13 +840,19 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 	struct scsi_qla_host *ha;
 	int bus, target, lun;
 	struct srb *sp;
-	uint16_t data;
-	unsigned char *handle;
-	int result, i;
+	int i, found;
+	int result=FAILED;
+	int wait_for_bus=-1;
+	int wait_for_target = -1;
 	DECLARE_COMPLETION_ONSTACK(wait);
-	struct timer_list timer;
+
+	ENTER("qla1280_error_action");
 
 	ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
+	sp = (struct srb *)CMD_SP(cmd);
+	bus = SCSI_BUS_32(cmd);
+	target = SCSI_TCN_32(cmd);
+	lun = SCSI_LUN_32(cmd);
 
 	dprintk(4, "error_action %i, istatus 0x%04x\n", action,
 		RD_REG_WORD(&ha->iobase->istatus));
@@ -807,99 +861,47 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 		RD_REG_WORD(&ha->iobase->host_cmd),
 		RD_REG_WORD(&ha->iobase->ictrl), jiffies);
 
-	ENTER("qla1280_error_action");
 	if (qla1280_verbose)
 		printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
 		       "Handle=0x%p, action=0x%x\n",
 		       ha->host_no, cmd, CMD_HANDLE(cmd), action);
 
-	if (cmd == NULL) {
-		printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
-		       "si_Cmnd pointer, failing.\n");
-		LEAVE("qla1280_error_action");
-		return FAILED;
-	}
-
-	ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
-	sp = (struct srb *)CMD_SP(cmd);
-	handle = CMD_HANDLE(cmd);
-
-	/* Check for pending interrupts. */
-	data = qla1280_debounce_register(&ha->iobase->istatus);
-	/*
-	 * The io_request_lock is held when the reset handler is called, hence
-	 * the interrupt handler cannot be running in parallel as it also
-	 * grabs the lock. /Jes
-	 */
-	if (data & RISC_INT)
-		qla1280_isr(ha, &ha->done_q);
-
 	/*
-	 * Determine the suggested action that the mid-level driver wants
-	 * us to perform.
+	 * Check to see if we have the command in the outstanding_cmds[]
+	 * array.  If not then it must have completed before this error
+	 * action was initiated.  If the error_action isn't ABORT_COMMAND
+	 * then the driver must proceed with the requested action.
 	 */
-	if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
-		if(action == ABORT_COMMAND) {
-			/* we never got this command */
-			printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
-			return SUCCESS;	/* no action - we don't have command */
+	found = -1;
+	for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
+		if (sp == ha->outstanding_cmds[i]) {
+			found = i;
+			sp->wait = &wait; /* we'll wait for it to complete */
+			break;
 		}
-	} else {
-		sp->wait = &wait;
 	}
 
-	bus = SCSI_BUS_32(cmd);
-	target = SCSI_TCN_32(cmd);
-	lun = SCSI_LUN_32(cmd);
+	if (found < 0) {	/* driver doesn't have command */
+		result = SUCCESS;
+		if (qla1280_verbose) {
+			printk(KERN_INFO
+			       "scsi(%ld:%d:%d:%d): specified command has "
+			       "already completed.\n", ha->host_no, bus,
+				target, lun);
+		}
+	}
 
-	/* Overloading result.  Here it means the success or fail of the
-	 * *issue* of the action.  When we return from the routine, it must
-	 * mean the actual success or fail of the action */
-	result = FAILED;
 	switch (action) {
-	case FAIL:
-		break;
 
 	case ABORT_COMMAND:
-		if ((sp->flags & SRB_ABORT_PENDING)) {
-			printk(KERN_WARNING
-			       "scsi(): Command has a pending abort "
-			       "message - ABORT_PENDING.\n");
-			/* This should technically be impossible since we
-			 * now wait for abort completion */
-			break;
-		}
-
-		for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
-			if (sp == ha->outstanding_cmds[i]) {
-				dprintk(1, "qla1280: RISC aborting command\n");
-				if (qla1280_abort_command(ha, sp, i) == 0)
-					result = SUCCESS;
-				else {
-					/*
-					 * Since we don't know what might
-					 * have happend to the command, it
-					 * is unsafe to remove it from the
-					 * device's queue at this point.
-					 * Wait and let the escalation
-					 * process take care of it.
-					 */
-					printk(KERN_WARNING
-					       "scsi(%li:%i:%i:%i): Unable"
-					       " to abort command!\n",
-					       ha->host_no, bus, target, lun);
-				}
-			}
-		}
-		break;
-
-	case ABORT_DEVICE:
-		if (qla1280_verbose)
-			printk(KERN_INFO
-			       "scsi(%ld:%d:%d:%d): Queueing abort device "
-			       "command.\n", ha->host_no, bus, target, lun);
-		if (qla1280_abort_device(ha, bus, target, lun) == 0)
-			result = SUCCESS;
+		dprintk(1, "qla1280: RISC aborting command\n");
+		/*
+		 * The abort might fail due to race when the host_lock
+		 * is released to issue the abort.  As such, we
+		 * don't bother to check the return status.
+		 */
+		if (found >= 0)
+			qla1280_abort_command(ha, sp, found);
 		break;
 
 	case DEVICE_RESET:
@@ -907,16 +909,21 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 			printk(KERN_INFO
 			       "scsi(%ld:%d:%d:%d): Queueing device reset "
 			       "command.\n", ha->host_no, bus, target, lun);
-		if (qla1280_device_reset(ha, bus, target) == 0)
-			result = SUCCESS;
+		if (qla1280_device_reset(ha, bus, target) == 0) {
+			/* issued device reset, set wait conditions */
+			wait_for_bus = bus;
+			wait_for_target = target;
+		}
 		break;
 
 	case BUS_RESET:
 		if (qla1280_verbose)
 			printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
 			       "reset.\n", ha->host_no, bus);
-		if (qla1280_bus_reset(ha, bus) == 0)
-			result = SUCCESS;
+		if (qla1280_bus_reset(ha, bus) == 0) {
+			/* issued bus reset, set wait conditions */
+			wait_for_bus = bus;
+		}
 		break;
 
 	case ADAPTER_RESET:
@@ -929,55 +936,48 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
 			       "continue automatically\n", ha->host_no);
 		}
 		ha->flags.reset_active = 1;
-		/*
-		 * We restarted all of the commands automatically, so the
-		 * mid-level code can expect completions momentitarily.
-		 */
-		if (qla1280_abort_isp(ha) == 0)
-			result = SUCCESS;
+
+		if (qla1280_abort_isp(ha) != 0) {	/* it's dead */
+			result = FAILED;
+		}
 
 		ha->flags.reset_active = 0;
 	}
 
-	if (!list_empty(&ha->done_q))
-		qla1280_done(ha);
-
-	/* If we didn't manage to issue the action, or we have no
-	 * command to wait for, exit here */
-	if (result == FAILED || handle == NULL ||
-	    handle == (unsigned char *)INVALID_HANDLE) {
-		/*
-		 * Clear completion queue to avoid qla1280_done() trying
-		 * to complete the command at a later stage after we
-		 * have exited the current context
-		 */
-		sp->wait = NULL;
-		goto leave;
-	}
+	/*
+	 * At this point, the host_lock has been released and retaken
+	 * by the issuance of the mailbox command.
+	 * Wait for the command passed in by the mid-layer if it
+	 * was found by the driver.  It might have been returned
+	 * between eh recovery steps, hence the check of the "found"
+	 * variable.
+	 */
 
-	/* set up a timer just in case we're really jammed */
-	init_timer(&timer);
-	timer.expires = jiffies + 4*HZ;
-	timer.data = (unsigned long)cmd;
-	timer.function = qla1280_error_wait_timeout;
-	add_timer(&timer);
+	if (found >= 0)
+		result = _qla1280_wait_for_single_command(ha, sp, &wait);
 
-	/* wait for the action to complete (or the timer to expire) */
-	spin_unlock_irq(ha->host->host_lock);
-	wait_for_completion(&wait);
-	del_timer_sync(&timer);
-	spin_lock_irq(ha->host->host_lock);
-	sp->wait = NULL;
+	if (action == ABORT_COMMAND && result != SUCCESS) {
+		printk(KERN_WARNING
+		       "scsi(%li:%i:%i:%i): "
+		       "Unable to abort command!\n",
+		       ha->host_no, bus, target, lun);
+	}
 
-	/* the only action we might get a fail for is abort */
-	if (action == ABORT_COMMAND) {
-		if(sp->flags & SRB_ABORTED)
-			result = SUCCESS;
-		else
-			result = FAILED;
+	/*
+	 * If the command passed in by the mid-layer has been
+	 * returned by the board, then wait for any additional
+	 * commands which are supposed to complete based upon
+	 * the error action.
+	 *
+	 * All commands are unconditionally returned during a
+	 * call to qla1280_abort_isp(), ADAPTER_RESET.  No need
+	 * to wait for them.
+	 */
+	if (result == SUCCESS && wait_for_bus >= 0) {
+		result = qla1280_wait_for_pending_commands(ha,
+					wait_for_bus, wait_for_target);
 	}
 
- leave:
 	dprintk(1, "RESET returning %d\n", result);
 
 	LEAVE("qla1280_error_action");
@@ -1280,13 +1280,12 @@ qla1280_done(struct scsi_qla_host *ha)
 		switch ((CMD_RESULT(cmd) >> 16)) {
 		case DID_RESET:
 			/* Issue marker command. */
-			qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
+			if (!ha->flags.abort_isp_active)
+				qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
 			break;
 		case DID_ABORT:
 			sp->flags &= ~SRB_ABORT_PENDING;
 			sp->flags |= SRB_ABORTED;
-			if (sp->flags & SRB_TIMEOUT)
-				CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
 			break;
 		default:
 			break;
@@ -1296,12 +1295,11 @@ qla1280_done(struct scsi_qla_host *ha)
 		scsi_dma_unmap(cmd);
 
 		/* Call the mid-level driver interrupt handler */
-		CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
 		ha->actthreads--;
 
-		(*(cmd)->scsi_done)(cmd);
-
-		if(sp->wait != NULL)
+		if (sp->wait == NULL)
+			(*(cmd)->scsi_done)(cmd);
+		else
 			complete(sp->wait);
 	}
 	LEAVE("qla1280_done");
@@ -2417,9 +2415,6 @@ static int
 qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
 {
 	struct device_reg __iomem *reg = ha->iobase;
-#if 0
-	LIST_HEAD(done_q);
-#endif
 	int status = 0;
 	int cnt;
 	uint16_t *optr, *iptr;
@@ -2493,19 +2488,9 @@ qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
 	mr = MAILBOX_REGISTER_COUNT;
 	memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
 
-#if 0
-	/* Go check for any response interrupts pending. */
-	qla1280_isr(ha, &done_q);
-#endif
-
 	if (ha->flags.reset_marker)
 		qla1280_rst_aen(ha);
 
-#if 0
-	if (!list_empty(&done_q))
-		qla1280_done(ha, &done_q);
-#endif
-
 	if (status)
 		dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
 			"0x%x ****\n", mb[0]);
@@ -2641,41 +2626,6 @@ qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
 }
 
 /*
- * qla1280_abort_device
- *      Issue an abort message to the device
- *
- * Input:
- *      ha     = adapter block pointer.
- *      bus    = SCSI BUS.
- *      target = SCSI ID.
- *      lun    = SCSI LUN.
- *
- * Returns:
- *      0 = success
- */
-static int
-qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
-{
-	uint16_t mb[MAILBOX_REGISTER_COUNT];
-	int status;
-
-	ENTER("qla1280_abort_device");
-
-	mb[0] = MBC_ABORT_DEVICE;
-	mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
-	status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
-
-	/* Issue marker command. */
-	qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
-
-	if (status)
-		dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
-
-	LEAVE("qla1280_abort_device");
-	return status;
-}
-
-/*
  * qla1280_abort_command
  *      Abort command aborts a specified IOCB.
  *
@@ -2833,7 +2783,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	/* If room for request in request ring. */
 	if ((req_cnt + 2) >= ha->req_q_cnt) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_start_scsi: in-ptr=0x%x  req_q_cnt="
 			"0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
 			req_cnt);
@@ -2845,7 +2795,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 		     ha->outstanding_cmds[cnt] != NULL; cnt++);
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_start_scsi: NO ROOM IN "
 			"OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
 		goto out;
@@ -3108,7 +3058,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 		ha->req_q_cnt, seg_cnt);
 	/* If room for request in request ring. */
 	if ((req_cnt + 2) >= ha->req_q_cnt) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
 			"req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
 			ha->req_q_cnt, req_cnt);
@@ -3120,7 +3070,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 		     (ha->outstanding_cmds[cnt] != 0); cnt++) ;
 
 	if (cnt >= MAX_OUTSTANDING_COMMANDS) {
-		status = 1;
+		status = SCSI_MLQUEUE_HOST_BUSY;
 		dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
 			"ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
 		goto out;
@@ -3487,6 +3437,7 @@ qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
 
 					/* Save ISP completion status */
 					CMD_RESULT(sp->cmd) = 0;
+					CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
 
 					/* Place block on done queue */
 					list_add_tail(&sp->list, done_q);
@@ -3495,7 +3446,7 @@ qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
 					 * If we get here we have a real problem!
 					 */
 					printk(KERN_WARNING
-					       "qla1280: ISP invalid handle");
+					       "qla1280: ISP invalid handle\n");
 				}
 			}
 			break;
@@ -3753,6 +3704,8 @@ qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
 		}
 	}
 
+	CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
 	/* Place command on done queue. */
 	list_add_tail(&sp->list, done_q);
  out:
@@ -3808,6 +3761,8 @@ qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
 			CMD_RESULT(sp->cmd) = DID_ERROR << 16;
 		}
 
+		CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
 		/* Place command on done queue. */
 		list_add_tail(&sp->list, done_q);
 	}
@@ -3858,19 +3813,16 @@ qla1280_abort_isp(struct scsi_qla_host *ha)
 		struct scsi_cmnd *cmd;
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
-
 			cmd = sp->cmd;
 			CMD_RESULT(cmd) = DID_RESET << 16;
-
-			sp->cmd = NULL;
+			CMD_HANDLE(cmd) = COMPLETED_HANDLE;
 			ha->outstanding_cmds[cnt] = NULL;
-
-			(*cmd->scsi_done)(cmd);
-
-			sp->flags = 0;
+			list_add_tail(&sp->list, &ha->done_q);
 		}
 	}
 
+	qla1280_done(ha);
+
 	status = qla1280_load_firmware(ha);
 	if (status)
 		goto out;
@@ -3955,13 +3907,6 @@ qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
 
 		if (scsi_control == SCSI_PHASE_INVALID) {
 			ha->bus_settings[bus].scsi_bus_dead = 1;
-#if 0
-			CMD_RESULT(cp) = DID_NO_CONNECT << 16;
-			CMD_HANDLE(cp) = INVALID_HANDLE;
-			/* ha->actthreads--; */
-
-			(*(cp)->scsi_done)(cp);
-#endif
 			return 1;	/* bus is dead */
 		} else {
 			ha->bus_settings[bus].scsi_bus_dead = 0;
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index d7c44b8d2b4..834884b9eed 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -88,7 +88,8 @@
 
 /* Maximum outstanding commands in ISP queues */
 #define MAX_OUTSTANDING_COMMANDS	512
-#define INVALID_HANDLE			(MAX_OUTSTANDING_COMMANDS + 2)
+#define COMPLETED_HANDLE		((unsigned char *) \
+					(MAX_OUTSTANDING_COMMANDS + 2))
 
 /* ISP request and response entry counts (37-65535) */
 #define REQUEST_ENTRY_CNT		255 /* Number of request entries. */
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index b09993a0657..0f879620150 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -97,7 +97,7 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj,
 		return 0;
 
 	if (IS_NOCACHE_VPD_TYPE(ha))
-		ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_nvram << 2,
+		ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2,
 		    ha->nvram_size);
 	return memory_read_from_buffer(buf, count, &off, ha->nvram,
 					ha->nvram_size);
@@ -692,6 +692,109 @@ static struct bin_attribute sysfs_edc_status_attr = {
 	.read = qla2x00_sysfs_read_edc_status,
 };
 
+static ssize_t
+qla2x00_sysfs_read_xgmac_stats(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	struct qla_hw_data *ha = vha->hw;
+	int rval;
+	uint16_t actual_size;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count > XGMAC_DATA_SIZE)
+		return 0;
+
+	if (ha->xgmac_data)
+		goto do_read;
+
+	ha->xgmac_data = dma_alloc_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+	    &ha->xgmac_data_dma, GFP_KERNEL);
+	if (!ha->xgmac_data) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to allocate memory for XGMAC read-data.\n");
+		return 0;
+	}
+
+do_read:
+	actual_size = 0;
+	memset(ha->xgmac_data, 0, XGMAC_DATA_SIZE);
+
+	rval = qla2x00_get_xgmac_stats(vha, ha->xgmac_data_dma,
+	    XGMAC_DATA_SIZE, &actual_size);
+	if (rval != QLA_SUCCESS) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to read XGMAC data (%x).\n", rval);
+		count = 0;
+	}
+
+	count = actual_size > count ? count: actual_size;
+	memcpy(buf, ha->xgmac_data, count);
+
+	return count;
+}
+
+static struct bin_attribute sysfs_xgmac_stats_attr = {
+	.attr = {
+		.name = "xgmac_stats",
+		.mode = S_IRUSR,
+	},
+	.size = 0,
+	.read = qla2x00_sysfs_read_xgmac_stats,
+};
+
+static ssize_t
+qla2x00_sysfs_read_dcbx_tlv(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	struct qla_hw_data *ha = vha->hw;
+	int rval;
+	uint16_t actual_size;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count > DCBX_TLV_DATA_SIZE)
+		return 0;
+
+	if (ha->dcbx_tlv)
+		goto do_read;
+
+	ha->dcbx_tlv = dma_alloc_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+	    &ha->dcbx_tlv_dma, GFP_KERNEL);
+	if (!ha->dcbx_tlv) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to allocate memory for DCBX TLV read-data.\n");
+		return 0;
+	}
+
+do_read:
+	actual_size = 0;
+	memset(ha->dcbx_tlv, 0, DCBX_TLV_DATA_SIZE);
+
+	rval = qla2x00_get_dcbx_params(vha, ha->dcbx_tlv_dma,
+	    DCBX_TLV_DATA_SIZE);
+	if (rval != QLA_SUCCESS) {
+		qla_printk(KERN_WARNING, ha,
+		    "Unable to read DCBX TLV data (%x).\n", rval);
+		count = 0;
+	}
+
+	memcpy(buf, ha->dcbx_tlv, count);
+
+	return count;
+}
+
+static struct bin_attribute sysfs_dcbx_tlv_attr = {
+	.attr = {
+		.name = "dcbx_tlv",
+		.mode = S_IRUSR,
+	},
+	.size = 0,
+	.read = qla2x00_sysfs_read_dcbx_tlv,
+};
+
 static struct sysfs_entry {
 	char *name;
 	struct bin_attribute *attr;
@@ -706,6 +809,8 @@ static struct sysfs_entry {
 	{ "reset", &sysfs_reset_attr, },
 	{ "edc", &sysfs_edc_attr, 2 },
 	{ "edc_status", &sysfs_edc_status_attr, 2 },
+	{ "xgmac_stats", &sysfs_xgmac_stats_attr, 3 },
+	{ "dcbx_tlv", &sysfs_dcbx_tlv_attr, 3 },
 	{ NULL },
 };
 
@@ -721,6 +826,8 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *vha)
 			continue;
 		if (iter->is4GBp_only == 2 && !IS_QLA25XX(vha->hw))
 			continue;
+		if (iter->is4GBp_only == 3 && !IS_QLA81XX(vha->hw))
+			continue;
 
 		ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
@@ -743,6 +850,8 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *vha)
 			continue;
 		if (iter->is4GBp_only == 2 && !IS_QLA25XX(ha))
 			continue;
+		if (iter->is4GBp_only == 3 && !IS_QLA81XX(ha))
+			continue;
 
 		sysfs_remove_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
@@ -1088,6 +1197,58 @@ qla2x00_flash_block_size_show(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "0x%x\n", ha->fdt_block_size);
 }
 
+static ssize_t
+qla2x00_vlan_id_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA81XX(vha->hw))
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", vha->fcoe_vlan_id);
+}
+
+static ssize_t
+qla2x00_vn_port_mac_address_show(struct device *dev,
+    struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	if (!IS_QLA81XX(vha->hw))
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+	    vha->fcoe_vn_port_mac[5], vha->fcoe_vn_port_mac[4],
+	    vha->fcoe_vn_port_mac[3], vha->fcoe_vn_port_mac[2],
+	    vha->fcoe_vn_port_mac[1], vha->fcoe_vn_port_mac[0]);
+}
+
+static ssize_t
+qla2x00_fabric_param_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", vha->hw->switch_cap);
+}
+
+static ssize_t
+qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
+    char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+	int rval;
+	uint16_t state[5];
+
+	rval = qla2x00_get_firmware_state(vha, state);
+	if (rval != QLA_SUCCESS)
+		memset(state, -1, sizeof(state));
+
+	return snprintf(buf, PAGE_SIZE, "0x%x 0x%x 0x%x 0x%x 0x%x\n", state[0],
+	    state[1], state[2], state[3], state[4]);
+}
+
 static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
 static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
 static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -1116,6 +1277,11 @@ static DEVICE_ATTR(mpi_version, S_IRUGO, qla2x00_mpi_version_show, NULL);
 static DEVICE_ATTR(phy_version, S_IRUGO, qla2x00_phy_version_show, NULL);
 static DEVICE_ATTR(flash_block_size, S_IRUGO, qla2x00_flash_block_size_show,
 		   NULL);
+static DEVICE_ATTR(vlan_id, S_IRUGO, qla2x00_vlan_id_show, NULL);
+static DEVICE_ATTR(vn_port_mac_address, S_IRUGO,
+		   qla2x00_vn_port_mac_address_show, NULL);
+static DEVICE_ATTR(fabric_param, S_IRUGO, qla2x00_fabric_param_show, NULL);
+static DEVICE_ATTR(fw_state, S_IRUGO, qla2x00_fw_state_show, NULL);
 
 struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_driver_version,
@@ -1138,6 +1304,10 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_mpi_version,
 	&dev_attr_phy_version,
 	&dev_attr_flash_block_size,
+	&dev_attr_vlan_id,
+	&dev_attr_vn_port_mac_address,
+	&dev_attr_fabric_param,
+	&dev_attr_fw_state,
 	NULL,
 };
 
@@ -1313,7 +1483,8 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
 	 */
-	if (fcport->loop_id != FC_NO_LOOP_ID)
+	if (fcport->loop_id != FC_NO_LOOP_ID &&
+	    !test_bit(UNLOADING, &fcport->vha->dpc_flags))
 		fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
 			fcport->loop_id, fcport->d_id.b.domain,
 			fcport->d_id.b.area, fcport->d_id.b.al_pa);
@@ -1437,11 +1608,13 @@ static int
 qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 {
 	int	ret = 0;
-	int	cnt = 0;
-	uint8_t	qos = QLA_DEFAULT_QUE_QOS;
+	uint8_t	qos = 0;
 	scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
 	scsi_qla_host_t *vha = NULL;
 	struct qla_hw_data *ha = base_vha->hw;
+	uint16_t options = 0;
+	int	cnt;
+	struct req_que *req = ha->req_q_map[0];
 
 	ret = qla24xx_vport_create_req_sanity_check(fc_vport);
 	if (ret) {
@@ -1497,23 +1670,39 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	qla24xx_vport_disable(fc_vport, disable);
 
-	/* Create a queue pair for the vport */
-	if (ha->mqenable) {
-		if (ha->npiv_info) {
-			for (; cnt < ha->nvram_npiv_size; cnt++) {
-				if (ha->npiv_info[cnt].port_name ==
-					vha->port_name &&
-					ha->npiv_info[cnt].node_name ==
-					vha->node_name) {
-					qos = ha->npiv_info[cnt].q_qos;
-					break;
-				}
-			}
+	if (ql2xmultique_tag) {
+		req = ha->req_q_map[1];
+		goto vport_queue;
+	} else if (ql2xmaxqueues == 1 || !ha->npiv_info)
+		goto vport_queue;
+	/* Create a request queue in QoS mode for the vport */
+	for (cnt = 0; cnt < ha->nvram_npiv_size; cnt++) {
+		if (memcmp(ha->npiv_info[cnt].port_name, vha->port_name, 8) == 0
+			&& memcmp(ha->npiv_info[cnt].node_name, vha->node_name,
+					8) == 0) {
+			qos = ha->npiv_info[cnt].q_qos;
+			break;
+		}
+	}
+	if (qos) {
+		ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, 0,
+			qos);
+		if (!ret)
+			qla_printk(KERN_WARNING, ha,
+			"Can't create request queue for vp_idx:%d\n",
+			vha->vp_idx);
+		else {
+			DEBUG2(qla_printk(KERN_INFO, ha,
+			"Request Que:%d (QoS: %d) created for vp_idx:%d\n",
+			ret, qos, vha->vp_idx));
+			req = ha->req_q_map[ret];
 		}
-		qla25xx_create_queues(vha, qos);
 	}
 
+vport_queue:
+	vha->req = req;
 	return 0;
+
 vport_create_failed_2:
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
@@ -1554,8 +1743,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 		    vha->host_no, vha->vp_idx, vha));
         }
 
-	if (ha->mqenable) {
-		if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+	if (vha->req->id && !ql2xmultique_tag) {
+		if (qla25xx_delete_req_que(vha, vha->req) != QLA_SUCCESS)
 			qla_printk(KERN_WARNING, ha,
 				"Queue delete failed.\n");
 	}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 34760f8d4f1..4a990f4da4e 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -149,11 +149,9 @@ qla24xx_pause_risc(struct device_reg_24xx __iomem *reg)
 	int rval = QLA_SUCCESS;
 	uint32_t cnt;
 
-	if (RD_REG_DWORD(&reg->hccr) & HCCRX_RISC_PAUSE)
-		return rval;
-
 	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
-	for (cnt = 30000; (RD_REG_DWORD(&reg->hccr) & HCCRX_RISC_PAUSE) == 0 &&
+	for (cnt = 30000;
+	    ((RD_REG_DWORD(&reg->host_status) & HSRX_RISC_PAUSED) == 0) &&
 	    rval == QLA_SUCCESS; cnt--) {
 		if (cnt)
 			udelay(100);
@@ -351,7 +349,7 @@ static inline void *
 qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 {
 	uint32_t cnt, que_idx;
-	uint8_t req_cnt, rsp_cnt, que_cnt;
+	uint8_t que_cnt;
 	struct qla2xxx_mq_chain *mq = ptr;
 	struct device_reg_25xxmq __iomem *reg;
 
@@ -363,9 +361,8 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 	mq->type = __constant_htonl(DUMP_CHAIN_MQ);
 	mq->chain_size = __constant_htonl(sizeof(struct qla2xxx_mq_chain));
 
-	req_cnt = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
-	rsp_cnt = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
-	que_cnt = req_cnt > rsp_cnt ? req_cnt : rsp_cnt;
+	que_cnt = ha->max_req_queues > ha->max_rsp_queues ?
+		ha->max_req_queues : ha->max_rsp_queues;
 	mq->count = htonl(que_cnt);
 	for (cnt = 0; cnt < que_cnt; cnt++) {
 		reg = (struct device_reg_25xxmq *) ((void *)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 714ee67567e..00aa48d975a 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -93,6 +93,7 @@
 #define LSD(x)	((uint32_t)((uint64_t)(x)))
 #define MSD(x)	((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
 
+#define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
 
 /*
  * I/O register
@@ -179,6 +180,7 @@
 #define REQUEST_ENTRY_CNT_24XX		2048	/* Number of request entries. */
 #define RESPONSE_ENTRY_CNT_2100		64	/* Number of response entries.*/
 #define RESPONSE_ENTRY_CNT_2300		512	/* Number of response entries.*/
+#define RESPONSE_ENTRY_CNT_MQ		128	/* Number of response entries.*/
 
 struct req_que;
 
@@ -186,7 +188,6 @@ struct req_que;
  * SCSI Request Block
  */
 typedef struct srb {
-	struct req_que *que;
 	struct fc_port *fcport;
 
 	struct scsi_cmnd *cmd;		/* Linux SCSI command pkt */
@@ -2008,7 +2009,7 @@ typedef struct vport_params {
 #define VP_RET_CODE_NOT_FOUND		6
 
 struct qla_hw_data;
-
+struct rsp_que;
 /*
  * ISP operations
  */
@@ -2030,10 +2031,9 @@ struct isp_operations {
 	void (*enable_intrs) (struct qla_hw_data *);
 	void (*disable_intrs) (struct qla_hw_data *);
 
-	int (*abort_command) (struct scsi_qla_host *, srb_t *,
-		struct req_que *);
-	int (*target_reset) (struct fc_port *, unsigned int);
-	int (*lun_reset) (struct fc_port *, unsigned int);
+	int (*abort_command) (srb_t *);
+	int (*target_reset) (struct fc_port *, unsigned int, int);
+	int (*lun_reset) (struct fc_port *, unsigned int, int);
 	int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
 		uint8_t, uint8_t, uint16_t *, uint8_t);
 	int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
@@ -2079,7 +2079,6 @@ struct isp_operations {
 #define QLA_PCI_MSIX_CONTROL	0xa2
 
 struct scsi_qla_host;
-struct rsp_que;
 
 struct qla_msix_entry {
 	int have_irq;
@@ -2140,7 +2139,6 @@ struct qla_statistics {
 #define MBC_INITIALIZE_MULTIQ 0x1f
 #define QLA_QUE_PAGE 0X1000
 #define QLA_MQ_SIZE 32
-#define QLA_MAX_HOST_QUES 16
 #define QLA_MAX_QUEUES 256
 #define ISP_QUE_REG(ha, id) \
 	((ha->mqenable) ? \
@@ -2170,6 +2168,8 @@ struct rsp_que {
 	struct qla_hw_data *hw;
 	struct qla_msix_entry *msix;
 	struct req_que *req;
+	srb_t *status_srb; /* status continuation entry */
+	struct work_struct q_work;
 };
 
 /* Request queue data structure */
@@ -2222,6 +2222,8 @@ struct qla_hw_data {
 		uint32_t	fce_enabled		:1;
 		uint32_t	fac_supported		:1;
 		uint32_t	chip_reset_done		:1;
+		uint32_t	port0			:1;
+		uint32_t	running_gold_fw		:1;
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -2246,7 +2248,8 @@ struct qla_hw_data {
 	struct rsp_que **rsp_q_map;
 	unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
 	unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
-	uint16_t 	max_queues;
+	uint8_t 	max_req_queues;
+	uint8_t 	max_rsp_queues;
 	struct qla_npiv_entry *npiv_info;
 	uint16_t	nvram_npiv_size;
 
@@ -2255,6 +2258,9 @@ struct qla_hw_data {
 #define FLOGI_MID_SUPPORT       BIT_10
 #define FLOGI_VSAN_SUPPORT      BIT_12
 #define FLOGI_SP_SUPPORT        BIT_13
+
+	uint8_t		port_no;		/* Physical port of adapter */
+
 	/* Timeout timers. */
 	uint8_t 	loop_down_abort_time;    /* port down timer */
 	atomic_t	loop_down_timer;         /* loop down timer */
@@ -2392,6 +2398,14 @@ struct qla_hw_data {
 	dma_addr_t	edc_data_dma;
 	uint16_t	edc_data_len;
 
+#define XGMAC_DATA_SIZE	PAGE_SIZE
+	void		*xgmac_data;
+	dma_addr_t	xgmac_data_dma;
+
+#define DCBX_TLV_DATA_SIZE PAGE_SIZE
+	void		*dcbx_tlv;
+	dma_addr_t	dcbx_tlv_dma;
+
 	struct task_struct	*dpc_thread;
 	uint8_t dpc_active;                  /* DPC routine is active */
 
@@ -2510,6 +2524,7 @@ struct qla_hw_data {
 	uint32_t        flt_region_vpd;
 	uint32_t        flt_region_nvram;
 	uint32_t        flt_region_npiv_conf;
+	uint32_t	flt_region_gold_fw;
 
 	/* Needed for BEACON */
 	uint16_t        beacon_blink_led;
@@ -2536,6 +2551,7 @@ struct qla_hw_data {
 	struct qla_chip_state_84xx *cs84xx;
 	struct qla_statistics qla_stats;
 	struct isp_operations *isp_ops;
+	struct workqueue_struct *wq;
 };
 
 /*
@@ -2545,6 +2561,8 @@ typedef struct scsi_qla_host {
 	struct list_head list;
 	struct list_head vp_fcports;	/* list of fcports */
 	struct list_head work_list;
+	spinlock_t work_lock;
+
 	/* Commonly used flags and state information. */
 	struct Scsi_Host *host;
 	unsigned long	host_no;
@@ -2591,8 +2609,6 @@ typedef struct scsi_qla_host {
 #define SWITCH_FOUND		BIT_0
 #define DFLG_NO_CABLE		BIT_1
 
-	srb_t		*status_srb;	/* Status continuation entry. */
-
 	/* ISP configuration data. */
 	uint16_t	loop_id;		/* Host adapter loop id */
 
@@ -2618,6 +2634,11 @@ typedef struct scsi_qla_host {
 	uint8_t		node_name[WWN_SIZE];
 	uint8_t		port_name[WWN_SIZE];
 	uint8_t		fabric_node_name[WWN_SIZE];
+
+	uint16_t	fcoe_vlan_id;
+	uint16_t	fcoe_fcf_idx;
+	uint8_t		fcoe_vn_port_mac[6];
+
 	uint32_t   	vp_abort_cnt;
 
 	struct fc_vport	*fc_vport;	/* holds fc_vport * for each vport */
@@ -2643,7 +2664,7 @@ typedef struct scsi_qla_host {
 #define VP_ERR_FAB_LOGOUT	4
 #define VP_ERR_ADAP_NORESOURCES	5
 	struct qla_hw_data *hw;
-	int	req_ques[QLA_MAX_HOST_QUES];
+	struct req_que *req;
 } scsi_qla_host_t;
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 96ccb9642ba..dfde2dd865c 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -878,7 +878,6 @@ struct device_reg_24xx {
 					/* HCCR statuses. */
 #define HCCRX_HOST_INT		BIT_6	/* Host to RISC interrupt bit. */
 #define HCCRX_RISC_RESET	BIT_5	/* RISC Reset mode bit. */
-#define HCCRX_RISC_PAUSE	BIT_4	/* RISC Pause mode bit. */
 					/* HCCR commands. */
 					/* NOOP. */
 #define HCCRX_NOOP		0x00000000
@@ -1241,6 +1240,7 @@ struct qla_flt_header {
 #define FLT_REG_HW_EVENT_1	0x1f
 #define FLT_REG_NPIV_CONF_0	0x29
 #define FLT_REG_NPIV_CONF_1	0x2a
+#define FLT_REG_GOLD_FW		0x2f
 
 struct qla_flt_region {
 	uint32_t code;
@@ -1405,6 +1405,8 @@ struct access_chip_rsp_84xx {
 #define MBC_IDC_ACK		0x101
 #define MBC_RESTART_MPI_FW	0x3d
 #define MBC_FLASH_ACCESS_CTRL	0x3e	/* Control flash access. */
+#define MBC_GET_XGMAC_STATS	0x7a
+#define MBC_GET_DCBX_PARAMS	0x51
 
 /* Flash access control option field bit definitions */
 #define FAC_OPT_FORCE_SEMAPHORE		BIT_15
@@ -1711,7 +1713,7 @@ struct ex_init_cb_81xx {
 #define FA_VPD0_ADDR_81		0xD0000
 #define FA_VPD1_ADDR_81		0xD0400
 #define FA_NVRAM0_ADDR_81	0xD0080
-#define FA_NVRAM1_ADDR_81	0xD0480
+#define FA_NVRAM1_ADDR_81	0xD0180
 #define FA_FEATURE_ADDR_81	0xD4000
 #define FA_FLASH_DESCR_ADDR_81	0xD8000
 #define FA_FLASH_LAYOUT_ADDR_81	0xD8400
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 528913f6bed..65b12d82867 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -65,8 +65,11 @@ extern int ql2xfdmienable;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xqfullrampup;
+extern int ql2xqfulltracking;
 extern int ql2xiidmaenable;
 extern int ql2xmaxqueues;
+extern int ql2xmultique_tag;
+extern int ql2xfwloadbin;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -145,7 +148,7 @@ qla2x00_dump_ram(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
 extern int
 qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
 
-extern void
+extern int
 qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *,
     uint16_t *, uint32_t *, uint8_t *, uint32_t *, uint8_t *);
 
@@ -165,13 +168,13 @@ extern int
 qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
 
 extern int
-qla2x00_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
+qla2x00_abort_command(srb_t *);
 
 extern int
-qla2x00_abort_target(struct fc_port *, unsigned int);
+qla2x00_abort_target(struct fc_port *, unsigned int, int);
 
 extern int
-qla2x00_lun_reset(struct fc_port *, unsigned int);
+qla2x00_lun_reset(struct fc_port *, unsigned int, int);
 
 extern int
 qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
@@ -236,9 +239,11 @@ extern int
 qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *,
     dma_addr_t);
 
-extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
-extern int qla24xx_abort_target(struct fc_port *, unsigned int);
-extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
+extern int qla24xx_abort_command(srb_t *);
+extern int
+qla24xx_abort_target(struct fc_port *, unsigned int, int);
+extern int
+qla24xx_lun_reset(struct fc_port *, unsigned int, int);
 
 extern int
 qla2x00_system_error(scsi_qla_host_t *);
@@ -288,6 +293,18 @@ qla81xx_fac_do_write_enable(scsi_qla_host_t *, int);
 extern int
 qla81xx_fac_erase_sector(scsi_qla_host_t *, uint32_t, uint32_t);
 
+extern int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t *);
+
+extern int
+qla2x00_get_dcbx_params(scsi_qla_host_t *, dma_addr_t, uint16_t);
+
+extern int
+qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *);
+
+extern int
+qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
@@ -295,8 +312,8 @@ extern irqreturn_t qla2100_intr_handler(int, void *);
 extern irqreturn_t qla2300_intr_handler(int, void *);
 extern irqreturn_t qla24xx_intr_handler(int, void *);
 extern void qla2x00_process_response_queue(struct rsp_que *);
-extern void qla24xx_process_response_queue(struct rsp_que *);
-
+extern void
+qla24xx_process_response_queue(struct scsi_qla_host *, struct rsp_que *);
 extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *);
 extern void qla2x00_free_irqs(scsi_qla_host_t *);
 
@@ -401,19 +418,21 @@ extern int qla25xx_request_irq(struct rsp_que *);
 extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
 extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
-	uint16_t, uint8_t, uint8_t);
+	uint16_t, int, uint8_t);
 extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
-	uint16_t);
+	uint16_t, int);
 extern int qla25xx_update_req_que(struct scsi_qla_host *, uint8_t, uint8_t);
 extern void qla2x00_init_response_q_entries(struct rsp_que *);
 extern int qla25xx_delete_req_que(struct scsi_qla_host *, struct req_que *);
 extern int qla25xx_delete_rsp_que(struct scsi_qla_host *, struct rsp_que *);
 extern int qla25xx_create_queues(struct scsi_qla_host *, uint8_t);
-extern int qla25xx_delete_queues(struct scsi_qla_host *, uint8_t);
+extern int qla25xx_delete_queues(struct scsi_qla_host *);
 extern uint16_t qla24xx_rd_req_reg(struct qla_hw_data *, uint16_t);
 extern uint16_t qla25xx_rd_req_reg(struct qla_hw_data *, uint16_t);
 extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
+extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
+
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 557f58d5bf8..917534b9f22 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1107,7 +1107,7 @@ qla2x00_mgmt_svr_login(scsi_qla_host_t *vha)
 		return ret;
 
 	ha->isp_ops->fabric_login(vha, vha->mgmt_svr_loop_id, 0xff, 0xff, 0xfa,
-	    mb, BIT_1);
+	    mb, BIT_1|BIT_0);
 	if (mb[0] != MBS_COMMAND_COMPLETE) {
 		DEBUG2_13(printk("%s(%ld): Failed MANAGEMENT_SERVER login: "
 		    "loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x\n",
@@ -1879,6 +1879,9 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list)
 			case BIT_13:
 				list[i].fp_speed = PORT_SPEED_4GB;
 				break;
+			case BIT_12:
+				list[i].fp_speed = PORT_SPEED_10GB;
+				break;
 			case BIT_11:
 				list[i].fp_speed = PORT_SPEED_8GB;
 				break;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bd7dd84c064..26202612932 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -634,7 +634,7 @@ qla2x00_chip_diag(scsi_qla_host_t *vha)
 		goto chip_diag_failed;
 
 	DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
-	    ha->host_no));
+	    vha->host_no));
 
 	/* Reset RISC processor. */
 	WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
@@ -655,7 +655,7 @@ qla2x00_chip_diag(scsi_qla_host_t *vha)
 		goto chip_diag_failed;
 
 	/* Check product ID of chip */
-	DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", ha->host_no));
+	DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", vha->host_no));
 
 	mb[1] = RD_MAILBOX_REG(ha, reg, 1);
 	mb[2] = RD_MAILBOX_REG(ha, reg, 2);
@@ -730,9 +730,6 @@ qla24xx_chip_diag(scsi_qla_host_t *vha)
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
 
-	/* Perform RISC reset. */
-	qla24xx_reset_risc(vha);
-
 	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;
 
 	rval = qla2x00_mbx_reg_test(vha);
@@ -786,7 +783,6 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 		    sizeof(uint32_t);
 		if (ha->mqenable)
 			mq_size = sizeof(struct qla2xxx_mq_chain);
-
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
 			goto try_eft;
@@ -850,8 +846,7 @@ cont_alloc:
 	rsp_q_size = rsp->length * sizeof(response_t);
 
 	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
-	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
-	    eft_size;
+	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size;
 	ha->chain_offset = dump_size;
 	dump_size += mq_size + fce_size;
 
@@ -891,6 +886,56 @@ cont_alloc:
 	    htonl(offsetof(struct qla2xxx_fw_dump, isp));
 }
 
+static int
+qla81xx_mpi_sync(scsi_qla_host_t *vha)
+{
+#define MPS_MASK	0xe0
+	int rval;
+	uint16_t dc;
+	uint32_t dw;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_SUCCESS;
+
+	rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to acquire semaphore.\n"));
+		goto done;
+	}
+
+	pci_read_config_word(vha->hw->pdev, 0x54, &dc);
+	rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to read sync.\n"));
+		goto done_release;
+	}
+
+	dc &= MPS_MASK;
+	if (dc == (dw & MPS_MASK))
+		goto done_release;
+
+	dw &= ~MPS_MASK;
+	dw |= dc;
+	rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to gain sync.\n"));
+	}
+
+done_release:
+	rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "Sync-MPI: Unable to release semaphore.\n"));
+	}
+
+done:
+	return rval;
+}
+
 /**
  * qla2x00_setup_chip() - Load and start RISC firmware.
  * @ha: HA context
@@ -915,6 +960,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	}
 
+	qla81xx_mpi_sync(vha);
+
 	/* Load firmware sequences */
 	rval = ha->isp_ops->load_risc(vha, &srisc_address);
 	if (rval == QLA_SUCCESS) {
@@ -931,13 +978,16 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			/* Retrieve firmware information. */
 			if (rval == QLA_SUCCESS) {
 				fw_major_version = ha->fw_major_version;
-				qla2x00_get_fw_version(vha,
+				rval = qla2x00_get_fw_version(vha,
 				    &ha->fw_major_version,
 				    &ha->fw_minor_version,
 				    &ha->fw_subminor_version,
 				    &ha->fw_attributes, &ha->fw_memory_size,
 				    ha->mpi_version, &ha->mpi_capabilities,
 				    ha->phy_version);
+				if (rval != QLA_SUCCESS)
+					goto failed;
+
 				ha->flags.npiv_supported = 0;
 				if (IS_QLA2XXX_MIDTYPE(ha) &&
 					 (ha->fw_attributes & BIT_2)) {
@@ -989,7 +1039,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			    ha->fw_subminor_version);
 		}
 	}
-
+failed:
 	if (rval) {
 		DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
 		    vha->host_no));
@@ -1013,12 +1063,14 @@ qla2x00_init_response_q_entries(struct rsp_que *rsp)
 	uint16_t cnt;
 	response_t *pkt;
 
+	rsp->ring_ptr = rsp->ring;
+	rsp->ring_index    = 0;
+	rsp->status_srb = NULL;
 	pkt = rsp->ring_ptr;
 	for (cnt = 0; cnt < rsp->length; cnt++) {
 		pkt->signature = RESPONSE_PROCESSED;
 		pkt++;
 	}
-
 }
 
 /**
@@ -1176,7 +1228,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
 		if (ha->flags.msix_enabled) {
 			msix = &ha->msix_entries[1];
 			DEBUG2_17(printk(KERN_INFO
-			"Reistering vector 0x%x for base que\n", msix->entry));
+			"Registering vector 0x%x for base que\n", msix->entry));
 			icb->msix = cpu_to_le16(msix->entry);
 		}
 		/* Use alternate PCI bus number */
@@ -1230,14 +1282,14 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
 	/* Clear outstanding commands array. */
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
-		for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
 			req->outstanding_cmds[cnt] = NULL;
 
-		req->current_outstanding_cmd = 0;
+		req->current_outstanding_cmd = 1;
 
 		/* Initialize firmware. */
 		req->ring_ptr  = req->ring;
@@ -1245,13 +1297,10 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 		req->cnt      = req->length;
 	}
 
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_rsp_queues; que++) {
 		rsp = ha->rsp_q_map[que];
 		if (!rsp)
 			continue;
-		rsp->ring_ptr = rsp->ring;
-		rsp->ring_index    = 0;
-
 		/* Initialize response queue entries */
 		qla2x00_init_response_q_entries(rsp);
 	}
@@ -1307,7 +1356,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 	unsigned long	wtime, mtime, cs84xx_time;
 	uint16_t	min_wait;	/* Minimum wait time if loop is down */
 	uint16_t	wait_time;	/* Wait time if loop is coming ready */
-	uint16_t	state[3];
+	uint16_t	state[5];
 	struct qla_hw_data *ha = vha->hw;
 
 	rval = QLA_SUCCESS;
@@ -1406,8 +1455,9 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 		    vha->host_no, state[0], jiffies));
 	} while (1);
 
-	DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
-	    vha->host_no, state[0], jiffies));
+	DEBUG(printk("scsi(%ld): fw_state=%x (%x, %x, %x, %x) curr time=%lx.\n",
+	    vha->host_no, state[0], state[1], state[2], state[3], state[4],
+	    jiffies));
 
 	if (rval) {
 		DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
@@ -1541,6 +1591,7 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
 	char *st, *en;
 	uint16_t index;
 	struct qla_hw_data *ha = vha->hw;
+	int use_tbl = !IS_QLA25XX(ha) && !IS_QLA81XX(ha);
 
 	if (memcmp(model, BINZERO, len) != 0) {
 		strncpy(ha->model_number, model, len);
@@ -1553,14 +1604,16 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len,
 		}
 
 		index = (ha->pdev->subsystem_device & 0xff);
-		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+		if (use_tbl &&
+		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES)
 			strncpy(ha->model_desc,
 			    qla2x00_model_name[index * 2 + 1],
 			    sizeof(ha->model_desc) - 1);
 	} else {
 		index = (ha->pdev->subsystem_device & 0xff);
-		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+		if (use_tbl &&
+		    ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES) {
 			strcpy(ha->model_number,
 			    qla2x00_model_name[index * 2]);
@@ -2061,8 +2114,10 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 	if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
 		if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
 			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
-		if (test_bit(RSCN_UPDATE, &save_flags))
+		if (test_bit(RSCN_UPDATE, &save_flags)) {
 			set_bit(RSCN_UPDATE, &vha->dpc_flags);
+			vha->flags.rscn_queue_overflow = 1;
+		}
 	}
 
 	return (rval);
@@ -2110,7 +2165,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 		goto cleanup_allocation;
 
 	DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
-	    ha->host_no, entries));
+	    vha->host_no, entries));
 	DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
 	    entries * sizeof(struct gid_list_info)));
 
@@ -2243,7 +2298,8 @@ static void
 qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 #define LS_UNKNOWN      2
-	static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
+	static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
+	char *link_speed;
 	int rval;
 	uint16_t mb[6];
 	struct qla_hw_data *ha = vha->hw;
@@ -2266,10 +2322,15 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		    fcport->port_name[6], fcport->port_name[7], rval,
 		    fcport->fp_speed, mb[0], mb[1]));
 	} else {
+		link_speed = link_speeds[LS_UNKNOWN];
+		if (fcport->fp_speed < 5)
+			link_speed = link_speeds[fcport->fp_speed];
+		else if (fcport->fp_speed == 0x13)
+			link_speed = link_speeds[5];
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "iIDMA adjusted to %s GB/s on "
 		    "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
-		    link_speeds[fcport->fp_speed], fcport->port_name[0],
+		    link_speed, fcport->port_name[0],
 		    fcport->port_name[1], fcport->port_name[2],
 		    fcport->port_name[3], fcport->port_name[4],
 		    fcport->port_name[5], fcport->port_name[6],
@@ -3180,9 +3241,14 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
 {
 	int rval = QLA_SUCCESS;
 	uint32_t wait_time;
-	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
-	struct rsp_que *rsp = req->rsp;
+	struct req_que *req;
+	struct rsp_que *rsp;
+
+	if (ql2xmultique_tag)
+		req = vha->hw->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
 
 	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
@@ -3448,7 +3514,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 	int ret = -1;
 	int i;
 
-	for (i = 1; i < ha->max_queues; i++) {
+	for (i = 1; i < ha->max_rsp_queues; i++) {
 		rsp = ha->rsp_q_map[i];
 		if (rsp) {
 			rsp->options &= ~BIT_0;
@@ -3462,6 +3528,8 @@ qla25xx_init_queues(struct qla_hw_data *ha)
 					"%s Rsp que:%d inited\n", __func__,
 						rsp->id));
 		}
+	}
+	for (i = 1; i < ha->max_req_queues; i++) {
 		req = ha->req_q_map[i];
 		if (req) {
 		/* Clear outstanding commands array. */
@@ -3566,14 +3634,15 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	nv = ha->nvram;
 
 	/* Determine NVRAM starting address. */
-	ha->nvram_size = sizeof(struct nvram_24xx);
-	ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
-	ha->vpd_size = FA_NVRAM_VPD_SIZE;
-	ha->vpd_base = FA_NVRAM_VPD0_ADDR;
-	if (PCI_FUNC(ha->pdev->devfn)) {
+	if (ha->flags.port0) {
+		ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+		ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+	} else {
 		ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
 		ha->vpd_base = FA_NVRAM_VPD1_ADDR;
 	}
+	ha->nvram_size = sizeof(struct nvram_24xx);
+	ha->vpd_size = FA_NVRAM_VPD_SIZE;
 
 	/* Get VPD data into cache */
 	ha->vpd = ha->nvram + VPD_OFFSET;
@@ -3587,7 +3656,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
 		chksum += le32_to_cpu(*dptr++);
 
-	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
 	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
 
 	/* Bad NVRAM data, set defaults parameters. */
@@ -3612,7 +3681,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->hard_address = __constant_cpu_to_le16(124);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -3798,11 +3867,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 }
 
 static int
-qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
+    uint32_t faddr)
 {
 	int	rval = QLA_SUCCESS;
 	int	segments, fragment;
-	uint32_t faddr;
 	uint32_t *dcode, dlen;
 	uint32_t risc_addr;
 	uint32_t risc_size;
@@ -3811,12 +3880,11 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	struct req_que *req = ha->req_q_map[0];
 
 	qla_printk(KERN_INFO, ha,
-	    "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+	    "FW: Loading from flash (%x)...\n", faddr);
 
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
-	faddr = ha->flt_region_fw;
 	dcode = (uint32_t *)req->ring;
 	*srisc_addr = 0;
 
@@ -4104,6 +4172,9 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int rval;
 
+	if (ql2xfwloadbin == 1)
+		return qla81xx_load_risc(vha, srisc_addr);
+
 	/*
 	 * FW Load priority:
 	 * 1) Firmware via request-firmware interface (.bin file).
@@ -4113,24 +4184,45 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	if (rval == QLA_SUCCESS)
 		return rval;
 
-	return qla24xx_load_risc_flash(vha, srisc_addr);
+	return qla24xx_load_risc_flash(vha, srisc_addr,
+	    vha->hw->flt_region_fw);
 }
 
 int
 qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int rval;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ql2xfwloadbin == 2)
+		goto try_blob_fw;
 
 	/*
 	 * FW Load priority:
 	 * 1) Firmware residing in flash.
 	 * 2) Firmware via request-firmware interface (.bin file).
+	 * 3) Golden-Firmware residing in flash -- limited operation.
 	 */
-	rval = qla24xx_load_risc_flash(vha, srisc_addr);
+	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
 	if (rval == QLA_SUCCESS)
 		return rval;
 
-	return qla24xx_load_risc_blob(vha, srisc_addr);
+try_blob_fw:
+	rval = qla24xx_load_risc_blob(vha, srisc_addr);
+	if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
+		return rval;
+
+	qla_printk(KERN_ERR, ha,
+	    "FW: Attempting to fallback to golden firmware...\n");
+	rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
+	if (rval != QLA_SUCCESS)
+		return rval;
+
+	qla_printk(KERN_ERR, ha,
+	    "FW: Please update operational firmware...\n");
+	ha->flags.running_gold_fw = 1;
+
+	return rval;
 }
 
 void
@@ -4146,7 +4238,7 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 
 	ret = qla2x00_stop_firmware(vha);
 	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
-	    retries ; retries--) {
+	    ret != QLA_INVALID_COMMAND && retries ; retries--) {
 		ha->isp_ops->reset_chip(vha);
 		if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
 			continue;
@@ -4165,13 +4257,19 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha)
 	uint16_t mb[MAILBOX_REGISTER_COUNT];
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
-	struct rsp_que *rsp = req->rsp;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	if (!vha->vp_idx)
 		return -EINVAL;
 
 	rval = qla2x00_fw_ready(base_vha);
+	if (ql2xmultique_tag)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
+
 	if (rval == QLA_SUCCESS) {
 		clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
 		qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
@@ -4305,7 +4403,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
 		chksum += le32_to_cpu(*dptr++);
 
-	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
 	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
 
 	/* Bad NVRAM data, set defaults parameters. */
@@ -4329,7 +4427,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -4358,12 +4456,12 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		nv->max_luns_per_target = __constant_cpu_to_le16(128);
 		nv->port_down_retry_count = __constant_cpu_to_le16(30);
 		nv->link_down_timeout = __constant_cpu_to_le16(30);
-		nv->enode_mac[0] = 0x01;
+		nv->enode_mac[0] = 0x00;
 		nv->enode_mac[1] = 0x02;
 		nv->enode_mac[2] = 0x03;
 		nv->enode_mac[3] = 0x04;
 		nv->enode_mac[4] = 0x05;
-		nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		nv->enode_mac[5] = 0x06 + ha->port_no;
 
 		rval = 1;
 	}
@@ -4396,7 +4494,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		icb->enode_mac[2] = 0x03;
 		icb->enode_mac[3] = 0x04;
 		icb->enode_mac[4] = 0x05;
-		icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		icb->enode_mac[5] = 0x06 + ha->port_no;
 	}
 
 	/* Use extended-initialization control block. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index a8abbb95730..13396beae2c 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -15,6 +15,7 @@ static request_t *qla2x00_req_pkt(struct scsi_qla_host *, struct req_que *,
 							struct rsp_que *rsp);
 static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
 
+static void qla25xx_set_que(srb_t *, struct rsp_que **);
 /**
  * qla2x00_get_cmd_direction() - Determine control_flag data direction.
  * @cmd: SCSI command
@@ -92,9 +93,10 @@ qla2x00_calc_iocbs_64(uint16_t dsds)
  * Returns a pointer to the Continuation Type 0 IOCB packet.
  */
 static inline cont_entry_t *
-qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
+qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
 {
 	cont_entry_t *cont_pkt;
+	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -120,10 +122,11 @@ qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
  * Returns a pointer to the continuation type 1 IOCB packet.
  */
 static inline cont_a64_entry_t *
-qla2x00_prep_cont_type1_iocb(struct req_que *req, scsi_qla_host_t *vha)
+qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
 {
 	cont_a64_entry_t *cont_pkt;
 
+	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -159,7 +162,6 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 	struct scsi_cmnd *cmd;
 	struct scatterlist *sg;
 	int i;
-	struct req_que *req;
 
 	cmd = sp->cmd;
 
@@ -174,8 +176,6 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
-
 	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Three DSDs are available in the Command Type 2 IOCB */
@@ -192,7 +192,7 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 			 * Seven DSDs are available in the Continuation
 			 * Type 0 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type0_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type0_iocb(vha);
 			cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
 			avail_dsds = 7;
 		}
@@ -220,7 +220,6 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 	struct scsi_cmnd *cmd;
 	struct scatterlist *sg;
 	int i;
-	struct req_que *req;
 
 	cmd = sp->cmd;
 
@@ -235,8 +234,6 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
-
 	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Two DSDs are available in the Command Type 3 IOCB */
@@ -254,7 +251,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -353,7 +350,6 @@ qla2x00_start_scsi(srb_t *sp)
 	/* Build command packet */
 	req->current_outstanding_cmd = handle;
 	req->outstanding_cmds[handle] = sp;
-	sp->que = req;
 	sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
 	req->cnt -= req_cnt;
 
@@ -453,6 +449,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
 			mrk24->lun[2] = MSB(lun);
 			host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
 			mrk24->vp_index = vha->vp_idx;
+			mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle);
 		} else {
 			SET_TARGET_ID(ha, mrk->target, loop_id);
 			mrk->lun = cpu_to_le16(lun);
@@ -531,9 +528,6 @@ qla2x00_req_pkt(struct scsi_qla_host *vha, struct req_que *req,
 			for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
 				*dword_ptr++ = 0;
 
-			/* Set system defined field. */
-			pkt->sys_define = (uint8_t)req->ring_index;
-
 			/* Set entry count. */
 			pkt->entry_count = 1;
 
@@ -656,7 +650,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
 	}
 
 	vha = sp->fcport->vha;
-	req = sp->que;
+	req = vha->req;
 
 	/* Set transfer direction */
 	if (cmd->sc_data_direction == DMA_TO_DEVICE) {
@@ -687,7 +681,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -724,19 +718,13 @@ qla24xx_start_scsi(srb_t *sp)
 	struct scsi_cmnd *cmd = sp->cmd;
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
-	uint16_t que_id;
 
 	/* Setup device pointers. */
 	ret = 0;
-	que_id = vha->req_ques[0];
 
-	req = ha->req_q_map[que_id];
-	sp->que = req;
+	qla25xx_set_que(sp, &rsp);
+	req = vha->req;
 
-	if (req->rsp)
-		rsp = req->rsp;
-	else
-		rsp = ha->rsp_q_map[que_id];
 	/* So we know we haven't pci_map'ed anything yet */
 	tot_dsds = 0;
 
@@ -794,7 +782,7 @@ qla24xx_start_scsi(srb_t *sp)
 	req->cnt -= req_cnt;
 
 	cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
-	cmd_pkt->handle = handle;
+	cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
 
 	/* Zero out remaining portion of packet. */
 	/*    tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -823,6 +811,8 @@ qla24xx_start_scsi(srb_t *sp)
 
 	/* Set total data segment count. */
 	cmd_pkt->entry_count = (uint8_t)req_cnt;
+	/* Specify response queue number where completion should happen */
+	cmd_pkt->entry_status = (uint8_t) rsp->id;
 	wmb();
 
 	/* Adjust ring index. */
@@ -842,7 +832,7 @@ qla24xx_start_scsi(srb_t *sp)
 	/* Manage unprocessed RIO/ZIO commands in response queue. */
 	if (vha->flags.process_response_queue &&
 		rsp->ring_ptr->signature != RESPONSE_PROCESSED)
-		qla24xx_process_response_queue(rsp);
+		qla24xx_process_response_queue(vha, rsp);
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return QLA_SUCCESS;
@@ -855,3 +845,16 @@ queuing_error:
 
 	return QLA_FUNCTION_FAILED;
 }
+
+static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp)
+{
+	struct scsi_cmnd *cmd = sp->cmd;
+	struct qla_hw_data *ha = sp->fcport->vha->hw;
+	int affinity = cmd->request->cpu;
+
+	if (ql2xmultique_tag && affinity >= 0 &&
+		affinity < ha->max_rsp_queues - 1)
+		*rsp = ha->rsp_q_map[affinity + 1];
+	 else
+		*rsp = ha->rsp_q_map[0];
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d04981848e5..c8d0a176fea 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -13,10 +13,9 @@ static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
 static void qla2x00_process_completed_request(struct scsi_qla_host *,
 	struct req_que *, uint32_t);
 static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
-static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
+static void qla2x00_status_cont_entry(struct rsp_que *, sts_cont_entry_t *);
 static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 	sts_entry_t *);
-static struct scsi_qla_host *qla2x00_get_rsp_host(struct rsp_que *);
 
 /**
  * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
@@ -51,7 +50,7 @@ qla2100_intr_handler(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		hccr = RD_REG_WORD(&reg->hccr);
 		if (hccr & HCCR_RISC_PAUSE) {
@@ -147,7 +146,7 @@ qla2300_intr_handler(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
 		if (stat & HSR_RISC_PAUSED) {
@@ -685,7 +684,7 @@ skip_rio:
 		    vha->host_no));
 
 		if (IS_FWI2_CAPABLE(ha))
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 		else
 			qla2x00_process_response_queue(rsp);
 		break;
@@ -766,7 +765,10 @@ qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data)
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = NULL;
 
-	req = ha->req_q_map[vha->req_ques[0]];
+	if (!ql2xqfulltracking)
+		return;
+
+	req = vha->req;
 	if (!req)
 		return;
 	if (req->max_q_depth <= sdev->queue_depth)
@@ -808,6 +810,9 @@ qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req,
 	fc_port_t *fcport;
 	struct scsi_device *sdev;
 
+	if (!ql2xqfulltracking)
+		return;
+
 	sdev = sp->cmd->device;
 	if (sdev->queue_depth >= req->max_q_depth)
 		return;
@@ -858,8 +863,8 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 		qla2x00_ramp_up_queue_depth(vha, req, sp);
 		qla2x00_sp_compl(ha, sp);
 	} else {
-		DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
-		    vha->host_no));
+		DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion"
+			" handle(%d)\n", vha->host_no, req->id, index));
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid ISP SCSI completion handle\n");
 
@@ -881,7 +886,7 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 	uint16_t        handle_cnt;
 	uint16_t        cnt;
 
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 
 	if (!vha->flags.online)
 		return;
@@ -926,7 +931,7 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 			}
 			break;
 		case STATUS_CONT_TYPE:
-			qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
 			break;
 		default:
 			/* Type Not Supported. */
@@ -945,7 +950,8 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 }
 
 static inline void
-qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
+qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len,
+	struct rsp_que *rsp)
 {
 	struct scsi_cmnd *cp = sp->cmd;
 
@@ -962,7 +968,7 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
 	sp->request_sense_ptr += sense_len;
 	sp->request_sense_length -= sense_len;
 	if (sp->request_sense_length != 0)
-		sp->fcport->vha->status_srb = sp;
+		rsp->status_srb = sp;
 
 	DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
 	    "cmd=%p pid=%ld\n", __func__, sp->fcport->vha->host_no,
@@ -992,7 +998,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	uint32_t	sense_len, rsp_info_len, resid_len, fw_resid_len;
 	uint8_t		*rsp_info, *sense_data;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = rsp->req;
+	uint32_t handle;
+	uint16_t que;
+	struct req_que *req;
 
 	sts = (sts_entry_t *) pkt;
 	sts24 = (struct sts_entry_24xx *) pkt;
@@ -1003,18 +1011,20 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		comp_status = le16_to_cpu(sts->comp_status);
 		scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
 	}
-
+	handle = (uint32_t) LSW(sts->handle);
+	que = MSW(sts->handle);
+	req = ha->req_q_map[que];
 	/* Fast path completion. */
 	if (comp_status == CS_COMPLETE && scsi_status == 0) {
-		qla2x00_process_completed_request(vha, req, sts->handle);
+		qla2x00_process_completed_request(vha, req, handle);
 
 		return;
 	}
 
 	/* Validate handle. */
-	if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
-		sp = req->outstanding_cmds[sts->handle];
-		req->outstanding_cmds[sts->handle] = NULL;
+	if (handle < MAX_OUTSTANDING_COMMANDS) {
+		sp = req->outstanding_cmds[handle];
+		req->outstanding_cmds[handle] = NULL;
 	} else
 		sp = NULL;
 
@@ -1030,7 +1040,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	cp = sp->cmd;
 	if (cp == NULL) {
 		DEBUG2(printk("scsi(%ld): Command already returned back to OS "
-		    "pkt->handle=%d sp=%p.\n", vha->host_no, sts->handle, sp));
+		    "pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp));
 		qla_printk(KERN_WARNING, ha,
 		    "Command is NULL: already returned to OS (sp=%p)\n", sp);
 
@@ -1121,6 +1131,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 			    scsi_status));
 
 			/* Adjust queue depth for all luns on the port. */
+			if (!ql2xqfulltracking)
+				break;
 			fcport->last_queue_full = jiffies;
 			starget_for_each_device(cp->device->sdev_target,
 			    fcport, qla2x00_adjust_sdev_qdepth_down);
@@ -1133,7 +1145,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		if (!(scsi_status & SS_SENSE_LEN_VALID))
 			break;
 
-		qla2x00_handle_sense(sp, sense_data, sense_len);
+		qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
 		break;
 
 	case CS_DATA_UNDERRUN:
@@ -1179,6 +1191,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 				 * Adjust queue depth for all luns on the
 				 * port.
 				 */
+				if (!ql2xqfulltracking)
+					break;
 				fcport->last_queue_full = jiffies;
 				starget_for_each_device(
 				    cp->device->sdev_target, fcport,
@@ -1192,12 +1206,12 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 			if (!(scsi_status & SS_SENSE_LEN_VALID))
 				break;
 
-			qla2x00_handle_sense(sp, sense_data, sense_len);
+			qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
 		} else {
 			/*
 			 * If RISC reports underrun and target does not report
 			 * it then we must have a lost frame, so tell upper
-			 * layer to retry it by reporting a bus busy.
+			 * layer to retry it by reporting an error.
 			 */
 			if (!(scsi_status & SS_RESIDUAL_UNDER)) {
 				DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
@@ -1207,7 +1221,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 					cp->device->id, cp->device->lun, resid,
 					scsi_bufflen(cp)));
 
-				cp->result = DID_BUS_BUSY << 16;
+				cp->result = DID_ERROR << 16;
 				break;
 			}
 
@@ -1334,7 +1348,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	}
 
 	/* Place command on done queue. */
-	if (vha->status_srb == NULL)
+	if (rsp->status_srb == NULL)
 		qla2x00_sp_compl(ha, sp);
 }
 
@@ -1346,11 +1360,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
  * Extended sense data.
  */
 static void
-qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
+qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
 {
 	uint8_t		sense_sz = 0;
-	struct qla_hw_data *ha = vha->hw;
-	srb_t		*sp = vha->status_srb;
+	struct qla_hw_data *ha = rsp->hw;
+	srb_t		*sp = rsp->status_srb;
 	struct scsi_cmnd *cp;
 
 	if (sp != NULL && sp->request_sense_length != 0) {
@@ -1362,7 +1376,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
 			    "cmd is NULL: already returned to OS (sp=%p)\n",
 			    sp);
 
-			vha->status_srb = NULL;
+			rsp->status_srb = NULL;
 			return;
 		}
 
@@ -1383,7 +1397,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
 
 		/* Place command on done queue. */
 		if (sp->request_sense_length == 0) {
-			vha->status_srb = NULL;
+			rsp->status_srb = NULL;
 			qla2x00_sp_compl(ha, sp);
 		}
 	}
@@ -1399,7 +1413,9 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 {
 	srb_t *sp;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = rsp->req;
+	uint32_t handle = LSW(pkt->handle);
+	uint16_t que = MSW(pkt->handle);
+	struct req_que *req = ha->req_q_map[que];
 #if defined(QL_DEBUG_LEVEL_2)
 	if (pkt->entry_status & RF_INV_E_ORDER)
 		qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
@@ -1417,14 +1433,14 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 #endif
 
 	/* Validate handle. */
-	if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
-		sp = req->outstanding_cmds[pkt->handle];
+	if (handle < MAX_OUTSTANDING_COMMANDS)
+		sp = req->outstanding_cmds[handle];
 	else
 		sp = NULL;
 
 	if (sp) {
 		/* Free outstanding command slot. */
-		req->outstanding_cmds[pkt->handle] = NULL;
+		req->outstanding_cmds[handle] = NULL;
 
 		/* Bad payload or header */
 		if (pkt->entry_status &
@@ -1486,13 +1502,10 @@ qla24xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
  * qla24xx_process_response_queue() - Process response queue entries.
  * @ha: SCSI driver HA context
  */
-void
-qla24xx_process_response_queue(struct rsp_que *rsp)
+void qla24xx_process_response_queue(struct scsi_qla_host *vha,
+	struct rsp_que *rsp)
 {
 	struct sts_entry_24xx *pkt;
-	struct scsi_qla_host *vha;
-
-	vha = qla2x00_get_rsp_host(rsp);
 
 	if (!vha->flags.online)
 		return;
@@ -1523,7 +1536,7 @@ qla24xx_process_response_queue(struct rsp_que *rsp)
 			qla2x00_status_entry(vha, rsp, pkt);
 			break;
 		case STATUS_CONT_TYPE:
-			qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
 			break;
 		case VP_RPT_ID_IOCB_TYPE:
 			qla24xx_report_id_acquisition(vha,
@@ -1626,7 +1639,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1664,7 +1677,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 			break;
 		case 0x13:
 		case 0x14:
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 			break;
 		default:
 			DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1692,6 +1705,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_24xx __iomem *reg;
+	struct scsi_qla_host *vha;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1704,7 +1718,8 @@ qla24xx_msix_rsp_q(int irq, void *dev_id)
 
 	spin_lock_irq(&ha->hardware_lock);
 
-	qla24xx_process_response_queue(rsp);
+	vha = qla25xx_get_host(rsp);
+	qla24xx_process_response_queue(vha, rsp);
 	WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 
 	spin_unlock_irq(&ha->hardware_lock);
@@ -1717,7 +1732,6 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
 {
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
-	struct device_reg_24xx __iomem *reg;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1726,13 +1740,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id)
 		return IRQ_NONE;
 	}
 	ha = rsp->hw;
-	reg = &ha->iobase->isp24;
 
-	spin_lock_irq(&ha->hardware_lock);
-
-	qla24xx_process_response_queue(rsp);
-
-	spin_unlock_irq(&ha->hardware_lock);
+	queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
 
 	return IRQ_HANDLED;
 }
@@ -1760,7 +1769,7 @@ qla24xx_msix_default(int irq, void *dev_id)
 	status = 0;
 
 	spin_lock_irq(&ha->hardware_lock);
-	vha = qla2x00_get_rsp_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
@@ -1798,7 +1807,7 @@ qla24xx_msix_default(int irq, void *dev_id)
 			break;
 		case 0x13:
 		case 0x14:
-			qla24xx_process_response_queue(rsp);
+			qla24xx_process_response_queue(vha, rsp);
 			break;
 		default:
 			DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1822,31 +1831,14 @@ qla24xx_msix_default(int irq, void *dev_id)
 /* Interrupt handling helpers. */
 
 struct qla_init_msix_entry {
-	uint16_t entry;
-	uint16_t index;
 	const char *name;
 	irq_handler_t handler;
 };
 
-static struct qla_init_msix_entry base_queue = {
-	.entry = 0,
-	.index = 0,
-	.name = "qla2xxx (default)",
-	.handler = qla24xx_msix_default,
-};
-
-static struct qla_init_msix_entry base_rsp_queue = {
-	.entry = 1,
-	.index = 1,
-	.name = "qla2xxx (rsp_q)",
-	.handler = qla24xx_msix_rsp_q,
-};
-
-static struct qla_init_msix_entry multi_rsp_queue = {
-	.entry = 1,
-	.index = 1,
-	.name = "qla2xxx (multi_q)",
-	.handler = qla25xx_msix_rsp_q,
+static struct qla_init_msix_entry msix_entries[3] = {
+	{ "qla2xxx (default)", qla24xx_msix_default },
+	{ "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
+	{ "qla2xxx (multiq)", qla25xx_msix_rsp_q },
 };
 
 static void
@@ -1873,7 +1865,6 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 	int i, ret;
 	struct msix_entry *entries;
 	struct qla_msix_entry *qentry;
-	struct qla_init_msix_entry *msix_queue;
 
 	entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count,
 					GFP_KERNEL);
@@ -1900,7 +1891,7 @@ msix_failed:
 				ha->msix_count, ret);
 			goto msix_out;
 		}
-		ha->max_queues = ha->msix_count - 1;
+		ha->max_rsp_queues = ha->msix_count - 1;
 	}
 	ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
 				ha->msix_count, GFP_KERNEL);
@@ -1918,45 +1909,27 @@ msix_failed:
 		qentry->rsp = NULL;
 	}
 
-	/* Enable MSI-X for AENs for queue 0 */
-	qentry = &ha->msix_entries[0];
-	ret = request_irq(qentry->vector, base_queue.handler, 0,
-					base_queue.name, rsp);
-	if (ret) {
-		qla_printk(KERN_WARNING, ha,
+	/* Enable MSI-X vectors for the base queue */
+	for (i = 0; i < 2; i++) {
+		qentry = &ha->msix_entries[i];
+		ret = request_irq(qentry->vector, msix_entries[i].handler,
+					0, msix_entries[i].name, rsp);
+		if (ret) {
+			qla_printk(KERN_WARNING, ha,
 			"MSI-X: Unable to register handler -- %x/%d.\n",
 			qentry->vector, ret);
-		qla24xx_disable_msix(ha);
-		goto msix_out;
+			qla24xx_disable_msix(ha);
+			ha->mqenable = 0;
+			goto msix_out;
+		}
+		qentry->have_irq = 1;
+		qentry->rsp = rsp;
+		rsp->msix = qentry;
 	}
-	qentry->have_irq = 1;
-	qentry->rsp = rsp;
 
 	/* Enable MSI-X vector for response queue update for queue 0 */
-	if (ha->max_queues > 1 && ha->mqiobase) {
+	if (ha->mqiobase &&  (ha->max_rsp_queues > 1 || ha->max_req_queues > 1))
 		ha->mqenable = 1;
-		msix_queue = &multi_rsp_queue;
-		qla_printk(KERN_INFO, ha,
-				"MQ enabled, Number of Queue Resources: %d \n",
-				ha->max_queues);
-	} else {
-		ha->mqenable = 0;
-		msix_queue = &base_rsp_queue;
-	}
-
-	qentry = &ha->msix_entries[1];
-	ret = request_irq(qentry->vector, msix_queue->handler, 0,
-						msix_queue->name, rsp);
-	if (ret) {
-		qla_printk(KERN_WARNING, ha,
-			"MSI-X: Unable to register handler -- %x/%d.\n",
-			qentry->vector, ret);
-		qla24xx_disable_msix(ha);
-		ha->mqenable = 0;
-		goto msix_out;
-	}
-	qentry->have_irq = 1;
-	qentry->rsp = rsp;
 
 msix_out:
 	kfree(entries);
@@ -2063,35 +2036,11 @@ qla2x00_free_irqs(scsi_qla_host_t *vha)
 	}
 }
 
-static struct scsi_qla_host *
-qla2x00_get_rsp_host(struct rsp_que *rsp)
-{
-	srb_t *sp;
-	struct qla_hw_data *ha = rsp->hw;
-	struct scsi_qla_host *vha = NULL;
-	struct sts_entry_24xx *pkt;
-	struct req_que *req;
-
-	if (rsp->id) {
-		pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
-		req = rsp->req;
-		if (pkt && pkt->handle < MAX_OUTSTANDING_COMMANDS) {
-			sp = req->outstanding_cmds[pkt->handle];
-			if (sp)
-				vha = sp->fcport->vha;
-		}
-	}
-	if (!vha)
-	/* handle it in base queue */
-		vha = pci_get_drvdata(ha->pdev);
-
-	return vha;
-}
 
 int qla25xx_request_irq(struct rsp_que *rsp)
 {
 	struct qla_hw_data *ha = rsp->hw;
-	struct qla_init_msix_entry *intr = &multi_rsp_queue;
+	struct qla_init_msix_entry *intr = &msix_entries[2];
 	struct qla_msix_entry *msix = rsp->msix;
 	int ret;
 
@@ -2106,3 +2055,30 @@ int qla25xx_request_irq(struct rsp_que *rsp)
 	msix->rsp = rsp;
 	return ret;
 }
+
+struct scsi_qla_host *
+qla25xx_get_host(struct rsp_que *rsp)
+{
+	srb_t *sp;
+	struct qla_hw_data *ha = rsp->hw;
+	struct scsi_qla_host *vha = NULL;
+	struct sts_entry_24xx *pkt;
+	struct req_que *req;
+	uint16_t que;
+	uint32_t handle;
+
+	pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
+	que = MSW(pkt->handle);
+	handle = (uint32_t) LSW(pkt->handle);
+	req = ha->req_q_map[que];
+	if (handle < MAX_OUTSTANDING_COMMANDS) {
+		sp = req->outstanding_cmds[handle];
+		if (sp)
+			return  sp->fcport->vha;
+		else
+			goto base_que;
+	}
+base_que:
+	vha = pci_get_drvdata(ha->pdev);
+	return vha;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e67c1660bf4..451ece0760b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -408,7 +408,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
  * Context:
  *	Kernel context.
  */
-void
+int
 qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
     uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi,
     uint32_t *mpi_caps, uint8_t *phy)
@@ -427,6 +427,8 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
 	mcp->flags = 0;
 	mcp->tov = MBX_TOV_SECONDS;
 	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS)
+		goto failed;
 
 	/* Return mailbox data. */
 	*major = mcp->mb[1];
@@ -446,7 +448,7 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
 		phy[1] = mcp->mb[9] >> 8;
 		phy[2] = mcp->mb[9] & 0xff;
 	}
-
+failed:
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
@@ -455,6 +457,7 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
 		/*EMPTY*/
 		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
+	return rval;
 }
 
 /*
@@ -748,20 +751,20 @@ qla2x00_issue_iocb(scsi_qla_host_t *vha, void *buffer, dma_addr_t phys_addr,
  *	Kernel context.
  */
 int
-qla2x00_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla2x00_abort_command(srb_t *sp)
 {
 	unsigned long   flags = 0;
-	fc_port_t	*fcport;
 	int		rval;
 	uint32_t	handle = 0;
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
+	fc_port_t	*fcport = sp->fcport;
+	scsi_qla_host_t *vha = fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = vha->req;
 
 	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha->host_no));
 
-	fcport = sp->fcport;
-
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
@@ -800,7 +803,7 @@ qla2x00_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
 }
 
 int
-qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
+qla2x00_abort_target(struct fc_port *fcport, unsigned int l, int tag)
 {
 	int rval, rval2;
 	mbx_cmd_t  mc;
@@ -813,8 +816,8 @@ qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
 
 	l = l;
 	vha = fcport->vha;
-	req = vha->hw->req_q_map[0];
-	rsp = vha->hw->rsp_q_map[0];
+	req = vha->hw->req_q_map[tag];
+	rsp = vha->hw->rsp_q_map[tag];
 	mcp->mb[0] = MBC_ABORT_TARGET;
 	mcp->out_mb = MBX_9|MBX_2|MBX_1|MBX_0;
 	if (HAS_EXTENDED_IDS(vha->hw)) {
@@ -850,7 +853,7 @@ qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
 }
 
 int
-qla2x00_lun_reset(struct fc_port *fcport, unsigned int l)
+qla2x00_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
 {
 	int rval, rval2;
 	mbx_cmd_t  mc;
@@ -862,8 +865,8 @@ qla2x00_lun_reset(struct fc_port *fcport, unsigned int l)
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no));
 
 	vha = fcport->vha;
-	req = vha->hw->req_q_map[0];
-	rsp = vha->hw->rsp_q_map[0];
+	req = vha->hw->req_q_map[tag];
+	rsp = vha->hw->rsp_q_map[tag];
 	mcp->mb[0] = MBC_LUN_RESET;
 	mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
 	if (HAS_EXTENDED_IDS(vha->hw))
@@ -931,6 +934,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa,
 	mcp->mb[9] = vha->vp_idx;
 	mcp->out_mb = MBX_9|MBX_0;
 	mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	if (IS_QLA81XX(vha->hw))
+		mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -952,9 +957,19 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa,
 		DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
 		    vha->host_no, rval));
 	} else {
-		/*EMPTY*/
 		DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
 		    vha->host_no));
+
+		if (IS_QLA81XX(vha->hw)) {
+			vha->fcoe_vlan_id = mcp->mb[9] & 0xfff;
+			vha->fcoe_fcf_idx = mcp->mb[10];
+			vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8;
+			vha->fcoe_vn_port_mac[4] = mcp->mb[11] & 0xff;
+			vha->fcoe_vn_port_mac[3] = mcp->mb[12] >> 8;
+			vha->fcoe_vn_port_mac[2] = mcp->mb[12] & 0xff;
+			vha->fcoe_vn_port_mac[1] = mcp->mb[13] >> 8;
+			vha->fcoe_vn_port_mac[0] = mcp->mb[13] & 0xff;
+		}
 	}
 
 	return rval;
@@ -1252,7 +1267,7 @@ qla2x00_get_firmware_state(scsi_qla_host_t *vha, uint16_t *states)
 
 	mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
 	mcp->out_mb = MBX_0;
-	mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -1261,6 +1276,8 @@ qla2x00_get_firmware_state(scsi_qla_host_t *vha, uint16_t *states)
 	states[0] = mcp->mb[1];
 	states[1] = mcp->mb[2];
 	states[2] = mcp->mb[3];
+	states[3] = mcp->mb[4];
+	states[4] = mcp->mb[5];
 
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
@@ -1480,9 +1497,17 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	dma_addr_t	lg_dma;
 	uint32_t	iop[2];
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (ql2xmultique_tag)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
+
 	lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
 	if (lg == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
@@ -1493,6 +1518,7 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
+	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI);
 	if (opt & BIT_0)
@@ -1741,6 +1767,8 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	struct logio_entry_24xx *lg;
 	dma_addr_t	lg_dma;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req;
+	struct rsp_que *rsp;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
@@ -1752,8 +1780,14 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	}
 	memset(lg, 0, sizeof(struct logio_entry_24xx));
 
+	if (ql2xmaxqueues > 1)
+		req = ha->req_q_map[0];
+	else
+		req = vha->req;
+	rsp = req->rsp;
 	lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
 	lg->entry_count = 1;
+	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags =
 	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
@@ -1864,9 +1898,6 @@ qla2x00_full_login_lip(scsi_qla_host_t *vha)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (IS_QLA81XX(vha->hw))
-	    return QLA_SUCCESS;
-
 	DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
 	    vha->host_no));
 
@@ -2195,21 +2226,21 @@ qla24xx_get_isp_stats(scsi_qla_host_t *vha, struct link_statistics *stats,
 }
 
 int
-qla24xx_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla24xx_abort_command(srb_t *sp)
 {
 	int		rval;
-	fc_port_t	*fcport;
 	unsigned long   flags = 0;
 
 	struct abort_entry_24xx *abt;
 	dma_addr_t	abt_dma;
 	uint32_t	handle;
+	fc_port_t	*fcport = sp->fcport;
+	struct scsi_qla_host *vha = fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = vha->req;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
-	fcport = sp->fcport;
-
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (req->outstanding_cmds[handle] == sp)
@@ -2231,6 +2262,7 @@ qla24xx_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
 
 	abt->entry_type = ABORT_IOCB_TYPE;
 	abt->entry_count = 1;
+	abt->handle = MAKE_HANDLE(req->id, abt->handle);
 	abt->nport_handle = cpu_to_le16(fcport->loop_id);
 	abt->handle_to_abort = handle;
 	abt->port_id[0] = fcport->d_id.b.al_pa;
@@ -2272,7 +2304,7 @@ struct tsk_mgmt_cmd {
 
 static int
 __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
-    unsigned int l)
+    unsigned int l, int tag)
 {
 	int		rval, rval2;
 	struct tsk_mgmt_cmd *tsk;
@@ -2286,8 +2318,11 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	vha = fcport->vha;
 	ha = vha->hw;
-	req = ha->req_q_map[0];
-	rsp = ha->rsp_q_map[0];
+	req = vha->req;
+	if (ql2xmultique_tag)
+		rsp = ha->rsp_q_map[tag + 1];
+	else
+		rsp = req->rsp;
 	tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
 	if (tsk == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
@@ -2298,6 +2333,7 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
 	tsk->p.tsk.entry_count = 1;
+	tsk->p.tsk.handle = MAKE_HANDLE(req->id, tsk->p.tsk.handle);
 	tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
 	tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
 	tsk->p.tsk.control_flags = cpu_to_le32(type);
@@ -2344,15 +2380,15 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 }
 
 int
-qla24xx_abort_target(struct fc_port *fcport, unsigned int l)
+qla24xx_abort_target(struct fc_port *fcport, unsigned int l, int tag)
 {
-	return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l);
+	return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l, tag);
 }
 
 int
-qla24xx_lun_reset(struct fc_port *fcport, unsigned int l)
+qla24xx_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
 {
-	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
+	return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l, tag);
 }
 
 int
@@ -2446,6 +2482,8 @@ qla2x00_stop_firmware(scsi_qla_host_t *vha)
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
 		    vha->host_no, rval));
+		if (mcp->mb[0] == MBS_INVALID_COMMAND)
+			rval = QLA_INVALID_COMMAND;
 	} else {
 		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
@@ -2717,8 +2755,11 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 		if (vp_idx == 0)
 			return;
 
-		if (MSB(stat) == 1)
+		if (MSB(stat) == 1) {
+			DEBUG2(printk("scsi(%ld): Could not acquire ID for "
+			    "VP[%d].\n", vha->host_no, vp_idx));
 			return;
+		}
 
 		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
 			if (vp_idx == vp->vp_idx)
@@ -3141,6 +3182,8 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
 		WRT_REG_DWORD(&reg->req_q_in, 0);
 		WRT_REG_DWORD(&reg->req_q_out, 0);
 	}
+	req->req_q_in = &reg->req_q_in;
+	req->req_q_out = &reg->req_q_out;
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -3167,7 +3210,6 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 	mcp->mb[6] = MSW(MSD(rsp->dma));
 	mcp->mb[7] = LSW(MSD(rsp->dma));
 	mcp->mb[5] = rsp->length;
-	mcp->mb[11] = rsp->vp_idx;
 	mcp->mb[14] = rsp->msix->entry;
 	mcp->mb[13] = rsp->rid;
 
@@ -3179,7 +3221,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 	mcp->mb[8] = 0;
 	/* que out ptr index */
 	mcp->mb[9] = 0;
-	mcp->out_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|MBX_7
+	mcp->out_mb = MBX_14|MBX_13|MBX_9|MBX_8|MBX_7
 			|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
 	mcp->flags = MBX_DMA_OUT;
@@ -3384,7 +3426,7 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
 		    vha->host_no, rval, mcp->mb[0]));
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
 	}
 
 	return rval;
@@ -3428,3 +3470,141 @@ qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 
 	return rval;
 }
+
+int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma,
+    uint16_t size_in_bytes, uint16_t *actual_size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_GET_XGMAC_STATS;
+	mcp->mb[2] = MSW(stats_dma);
+	mcp->mb[3] = LSW(stats_dma);
+	mcp->mb[6] = MSW(MSD(stats_dma));
+	mcp->mb[7] = LSW(MSD(stats_dma));
+	mcp->mb[8] = size_in_bytes >> 2;
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+		    "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+
+		*actual_size = mcp->mb[2] << 2;
+	}
+
+	return rval;
+}
+
+int
+qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma,
+    uint16_t size)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA81XX(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_GET_DCBX_PARAMS;
+	mcp->mb[1] = 0;
+	mcp->mb[2] = MSW(tlv_dma);
+	mcp->mb[3] = LSW(tlv_dma);
+	mcp->mb[6] = MSW(MSD(tlv_dma));
+	mcp->mb[7] = LSW(MSD(tlv_dma));
+	mcp->mb[8] = size;
+	mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+		    "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
+
+int
+qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_READ_RAM_EXTENDED;
+	mcp->mb[1] = LSW(risc_addr);
+	mcp->mb[8] = MSW(risc_addr);
+	mcp->out_mb = MBX_8|MBX_1|MBX_0;
+	mcp->in_mb = MBX_3|MBX_2|MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+		*data = mcp->mb[3] << 16 | mcp->mb[2];
+	}
+
+	return rval;
+}
+
+int
+qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_FWI2_CAPABLE(vha->hw))
+                return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_WRITE_RAM_WORD_EXTENDED;
+	mcp->mb[1] = LSW(risc_addr);
+	mcp->mb[2] = LSW(data);
+	mcp->mb[3] = MSW(data);
+	mcp->mb[8] = MSW(risc_addr);
+	mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+	}
+
+	return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 51716c7e300..650bcef08f2 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -398,9 +398,8 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 
 	qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
 
-	memset(vha->req_ques, 0, sizeof(vha->req_ques));
-	vha->req_ques[0] = ha->req_q_map[0]->id;
-	host->can_queue = ha->req_q_map[0]->length + 128;
+	vha->req = base_vha->req;
+	host->can_queue = base_vha->req->length + 128;
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
 	host->max_cmd_len = MAX_CMDSZ;
@@ -515,76 +514,53 @@ int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos)
 
 /* Delete all queues for a given vhost */
 int
-qla25xx_delete_queues(struct scsi_qla_host *vha, uint8_t que_no)
+qla25xx_delete_queues(struct scsi_qla_host *vha)
 {
 	int cnt, ret = 0;
 	struct req_que *req = NULL;
 	struct rsp_que *rsp = NULL;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (que_no) {
-	/* Delete request queue */
-		req = ha->req_q_map[que_no];
+	/* Delete request queues */
+	for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
+		req = ha->req_q_map[cnt];
 		if (req) {
-			rsp = req->rsp;
 			ret = qla25xx_delete_req_que(vha, req);
 			if (ret != QLA_SUCCESS) {
 				qla_printk(KERN_WARNING, ha,
-				"Couldn't delete req que %d\n", req->id);
+				"Couldn't delete req que %d\n",
+				req->id);
 				return ret;
 			}
-			/* Delete associated response queue */
-			if (rsp) {
-				ret = qla25xx_delete_rsp_que(vha, rsp);
-				if (ret != QLA_SUCCESS) {
-					qla_printk(KERN_WARNING, ha,
-						"Couldn't delete rsp que %d\n",
-						rsp->id);
-					return ret;
-				}
-			}
 		}
-	} else {  /* delete all queues of this host */
-		for (cnt = 0; cnt < QLA_MAX_HOST_QUES; cnt++) {
-			/* Delete request queues */
-			req = ha->req_q_map[vha->req_ques[cnt]];
-			if (req && req->id) {
-				rsp = req->rsp;
-				ret = qla25xx_delete_req_que(vha, req);
-				if (ret != QLA_SUCCESS) {
-					qla_printk(KERN_WARNING, ha,
-						"Couldn't delete req que %d\n",
-						vha->req_ques[cnt]);
-					return ret;
-				}
-				vha->req_ques[cnt] = ha->req_q_map[0]->id;
-			/* Delete associated response queue */
-				if (rsp && rsp->id) {
-					ret = qla25xx_delete_rsp_que(vha, rsp);
-					if (ret != QLA_SUCCESS) {
-						qla_printk(KERN_WARNING, ha,
-						"Couldn't delete rsp que %d\n",
-						rsp->id);
-						return ret;
-					}
-				}
+	}
+
+	/* Delete response queues */
+	for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
+		rsp = ha->rsp_q_map[cnt];
+		if (rsp) {
+			ret = qla25xx_delete_rsp_que(vha, rsp);
+			if (ret != QLA_SUCCESS) {
+				qla_printk(KERN_WARNING, ha,
+				"Couldn't delete rsp que %d\n",
+				rsp->id);
+				return ret;
 			}
 		}
 	}
-	qla_printk(KERN_INFO, ha, "Queues deleted for vport:%d\n",
-		vha->vp_idx);
 	return ret;
 }
 
 int
 qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
-	uint8_t vp_idx, uint16_t rid, uint8_t rsp_que, uint8_t qos)
+	uint8_t vp_idx, uint16_t rid, int rsp_que, uint8_t qos)
 {
 	int ret = 0;
 	struct req_que *req = NULL;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 	uint16_t que_id = 0;
 	device_reg_t __iomem *reg;
+	uint32_t cnt;
 
 	req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
 	if (req == NULL) {
@@ -604,8 +580,8 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	}
 
 	mutex_lock(&ha->vport_lock);
-	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
-	if (que_id >= ha->max_queues) {
+	que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues);
+	if (que_id >= ha->max_req_queues) {
 		mutex_unlock(&ha->vport_lock);
 		qla_printk(KERN_INFO, ha, "No resources to create "
 			 "additional request queue\n");
@@ -617,10 +593,10 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	req->vp_idx = vp_idx;
 	req->qos = qos;
 
-	if (ha->rsp_q_map[rsp_que]) {
+	if (rsp_que < 0)
+		req->rsp = NULL;
+	else
 		req->rsp = ha->rsp_q_map[rsp_que];
-		req->rsp->req = req;
-	}
 	/* Use alternate PCI bus number */
 	if (MSB(req->rid))
 		options |= BIT_4;
@@ -628,13 +604,16 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 	if (LSB(req->rid))
 		options |= BIT_5;
 	req->options = options;
+
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+		req->outstanding_cmds[cnt] = NULL;
+	req->current_outstanding_cmd = 1;
+
 	req->ring_ptr = req->ring;
 	req->ring_index = 0;
 	req->cnt = req->length;
 	req->id = que_id;
 	reg = ISP_QUE_REG(ha, que_id);
-	req->req_q_in = &reg->isp25mq.req_q_in;
-	req->req_q_out = &reg->isp25mq.req_q_out;
 	req->max_q_depth = ha->req_q_map[0]->max_q_depth;
 	mutex_unlock(&ha->vport_lock);
 
@@ -654,10 +633,19 @@ que_failed:
 	return 0;
 }
 
+static void qla_do_work(struct work_struct *work)
+{
+	struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
+	struct scsi_qla_host *vha;
+
+	vha = qla25xx_get_host(rsp);
+	qla24xx_process_response_queue(vha, rsp);
+}
+
 /* create response queue */
 int
 qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
-	uint8_t vp_idx, uint16_t rid)
+	uint8_t vp_idx, uint16_t rid, int req)
 {
 	int ret = 0;
 	struct rsp_que *rsp = NULL;
@@ -672,7 +660,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 		goto que_failed;
 	}
 
-	rsp->length = RESPONSE_ENTRY_CNT_2300;
+	rsp->length = RESPONSE_ENTRY_CNT_MQ;
 	rsp->ring = dma_alloc_coherent(&ha->pdev->dev,
 			(rsp->length + 1) * sizeof(response_t),
 			&rsp->dma, GFP_KERNEL);
@@ -683,8 +671,8 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	}
 
 	mutex_lock(&ha->vport_lock);
-	que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
-	if (que_id >= ha->max_queues) {
+	que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_rsp_queues);
+	if (que_id >= ha->max_rsp_queues) {
 		mutex_unlock(&ha->vport_lock);
 		qla_printk(KERN_INFO, ha, "No resources to create "
 			 "additional response queue\n");
@@ -708,8 +696,6 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 	if (LSB(rsp->rid))
 		options |= BIT_5;
 	rsp->options = options;
-	rsp->ring_ptr = rsp->ring;
-	rsp->ring_index = 0;
 	rsp->id = que_id;
 	reg = ISP_QUE_REG(ha, que_id);
 	rsp->rsp_q_in = &reg->isp25mq.rsp_q_in;
@@ -728,9 +714,14 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 		mutex_unlock(&ha->vport_lock);
 		goto que_failed;
 	}
+	if (req >= 0)
+		rsp->req = ha->req_q_map[req];
+	else
+		rsp->req = NULL;
 
 	qla2x00_init_response_q_entries(rsp);
-
+	if (rsp->hw->wq)
+		INIT_WORK(&rsp->q_work, qla_do_work);
 	return rsp->id;
 
 que_failed:
@@ -744,14 +735,16 @@ qla25xx_create_queues(struct scsi_qla_host *vha, uint8_t qos)
 	uint16_t options = 0;
 	uint8_t ret = 0;
 	struct qla_hw_data *ha = vha->hw;
+	struct rsp_que *rsp;
 
 	options |= BIT_1;
-	ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0);
+	ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0, -1);
 	if (!ret) {
 		qla_printk(KERN_WARNING, ha, "Response Que create failed\n");
 		return ret;
 	} else
 		qla_printk(KERN_INFO, ha, "Response Que:%d created.\n", ret);
+	rsp = ha->rsp_q_map[ret];
 
 	options = 0;
 	if (qos & BIT_7)
@@ -759,10 +752,11 @@ qla25xx_create_queues(struct scsi_qla_host *vha, uint8_t qos)
 	ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, ret,
 					qos & ~BIT_7);
 	if (ret) {
-		vha->req_ques[0] = ret;
+		vha->req = ha->req_q_map[ret];
 		qla_printk(KERN_INFO, ha, "Request Que:%d created.\n", ret);
 	} else
 		qla_printk(KERN_WARNING, ha, "Request Que create failed\n");
+	rsp->req = ha->req_q_map[ret];
 
 	return ret;
 }
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e4fdcdad80d..dcf011679c8 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -77,6 +77,14 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to report for target devices.");
 
+int ql2xqfulltracking = 1;
+module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xqfulltracking,
+		"Controls whether the driver tracks queue full status "
+		"returns and dynamically adjusts a scsi device's queue "
+		"depth.  Default is 1, perform tracking.  Set to 0 to "
+		"disable dynamic tracking and adjustment of queue depth.");
+
 int ql2xqfullrampup = 120;
 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xqfullrampup,
@@ -96,6 +104,23 @@ MODULE_PARM_DESC(ql2xmaxqueues,
 		"Enables MQ settings "
 		"Default is 1 for single queue. Set it to number \
 			of queues in MQ mode.");
+
+int ql2xmultique_tag;
+module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xmultique_tag,
+		"Enables CPU affinity settings for the driver "
+		"Default is 0 for no affinity of request and response IO. "
+		"Set it to 1 to turn on the cpu affinity.");
+
+int ql2xfwloadbin;
+module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfwloadbin,
+		"Option to specify location from which to load ISP firmware:\n"
+		" 2 -- load firmware via the request_firmware() (hotplug)\n"
+		"      interface.\n"
+		" 1 -- load firmware from flash.\n"
+		" 0 -- use default semantics.\n");
+
 /*
  * SCSI host template entry points
  */
@@ -187,7 +212,7 @@ static void qla2x00_sp_free_dma(srb_t *);
 /* -------------------------------------------------------------------------- */
 static int qla2x00_alloc_queues(struct qla_hw_data *ha)
 {
-	ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_queues,
+	ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
 				GFP_KERNEL);
 	if (!ha->req_q_map) {
 		qla_printk(KERN_WARNING, ha,
@@ -195,7 +220,7 @@ static int qla2x00_alloc_queues(struct qla_hw_data *ha)
 		goto fail_req_map;
 	}
 
-	ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_queues,
+	ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
 				GFP_KERNEL);
 	if (!ha->rsp_q_map) {
 		qla_printk(KERN_WARNING, ha,
@@ -213,16 +238,8 @@ fail_req_map:
 	return -ENOMEM;
 }
 
-static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
-	struct rsp_que *rsp)
+static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
 {
-	if (rsp && rsp->ring)
-		dma_free_coherent(&ha->pdev->dev,
-		(rsp->length + 1) * sizeof(response_t),
-		rsp->ring, rsp->dma);
-
-	kfree(rsp);
-	rsp = NULL;
 	if (req && req->ring)
 		dma_free_coherent(&ha->pdev->dev,
 		(req->length + 1) * sizeof(request_t),
@@ -232,22 +249,77 @@ static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
 	req = NULL;
 }
 
+static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
+{
+	if (rsp && rsp->ring)
+		dma_free_coherent(&ha->pdev->dev,
+		(rsp->length + 1) * sizeof(response_t),
+		rsp->ring, rsp->dma);
+
+	kfree(rsp);
+	rsp = NULL;
+}
+
 static void qla2x00_free_queues(struct qla_hw_data *ha)
 {
 	struct req_que *req;
 	struct rsp_que *rsp;
 	int cnt;
 
-	for (cnt = 0; cnt < ha->max_queues; cnt++) {
-		rsp = ha->rsp_q_map[cnt];
+	for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
 		req = ha->req_q_map[cnt];
-		qla2x00_free_que(ha, req, rsp);
+		qla2x00_free_req_que(ha, req);
+	}
+	kfree(ha->req_q_map);
+	ha->req_q_map = NULL;
+
+	for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+		rsp = ha->rsp_q_map[cnt];
+		qla2x00_free_rsp_que(ha, rsp);
 	}
 	kfree(ha->rsp_q_map);
 	ha->rsp_q_map = NULL;
+}
 
-	kfree(ha->req_q_map);
-	ha->req_q_map = NULL;
+static int qla25xx_setup_mode(struct scsi_qla_host *vha)
+{
+	uint16_t options = 0;
+	int ques, req, ret;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ql2xmultique_tag) {
+		/* CPU affinity mode */
+		ha->wq = create_workqueue("qla2xxx_wq");
+		/* create a request queue for IO */
+		options |= BIT_7;
+		req = qla25xx_create_req_que(ha, options, 0, 0, -1,
+			QLA_DEFAULT_QUE_QOS);
+		if (!req) {
+			qla_printk(KERN_WARNING, ha,
+				"Can't create request queue\n");
+			goto fail;
+		}
+		vha->req = ha->req_q_map[req];
+		options |= BIT_1;
+		for (ques = 1; ques < ha->max_rsp_queues; ques++) {
+			ret = qla25xx_create_rsp_que(ha, options, 0, 0, req);
+			if (!ret) {
+				qla_printk(KERN_WARNING, ha,
+					"Response Queue create failed\n");
+				goto fail2;
+			}
+		}
+		DEBUG2(qla_printk(KERN_INFO, ha,
+			"CPU affinity mode enabled, no. of response"
+			" queues:%d, no. of request queues:%d\n",
+			ha->max_rsp_queues, ha->max_req_queues));
+	}
+	return 0;
+fail2:
+	qla25xx_delete_queues(vha);
+fail:
+	ha->mqenable = 0;
+	return 1;
 }
 
 static char *
@@ -387,7 +459,6 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 
 	sp->fcport = fcport;
 	sp->cmd = cmd;
-	sp->que = ha->req_q_map[0];
 	sp->flags = 0;
 	CMD_SP(cmd) = (void *)sp;
 	cmd->scsi_done = done;
@@ -612,7 +683,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
 void
 qla2x00_abort_fcport_cmds(fc_port_t *fcport)
 {
-	int cnt, que, id;
+	int cnt;
 	unsigned long flags;
 	srb_t *sp;
 	scsi_qla_host_t *vha = fcport->vha;
@@ -620,32 +691,27 @@ qla2x00_abort_fcport_cmds(fc_port_t *fcport)
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
-		id = vha->req_ques[que];
-		req = ha->req_q_map[id];
-		if (!req)
+	req = vha->req;
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = req->outstanding_cmds[cnt];
+		if (!sp)
+			continue;
+		if (sp->fcport != fcport)
 			continue;
-		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-			sp = req->outstanding_cmds[cnt];
-			if (!sp)
-				continue;
-			if (sp->fcport != fcport)
-				continue;
 
-			spin_unlock_irqrestore(&ha->hardware_lock, flags);
-			if (ha->isp_ops->abort_command(vha, sp, req)) {
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		if (ha->isp_ops->abort_command(sp)) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			"Abort failed --  %lx\n",
+			sp->cmd->serial_number));
+		} else {
+			if (qla2x00_eh_wait_on_command(sp->cmd) !=
+				QLA_SUCCESS)
 				DEBUG2(qla_printk(KERN_WARNING, ha,
-				"Abort failed --  %lx\n",
+				"Abort failed while waiting --  %lx\n",
 				sp->cmd->serial_number));
-			} else {
-				if (qla2x00_eh_wait_on_command(sp->cmd) !=
-					QLA_SUCCESS)
-					DEBUG2(qla_printk(KERN_WARNING, ha,
-					"Abort failed while waiting --  %lx\n",
-					sp->cmd->serial_number));
-			}
-			spin_lock_irqsave(&ha->hardware_lock, flags);
 		}
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
@@ -693,7 +759,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	unsigned long flags;
 	int wait = 0;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req;
+	struct req_que *req = vha->req;
 	srb_t *spt;
 
 	qla2x00_block_error_handler(cmd);
@@ -709,7 +775,6 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	spt = (srb_t *) CMD_SP(cmd);
 	if (!spt)
 		return SUCCESS;
-	req = spt->que;
 
 	/* Check active list for command command. */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -726,7 +791,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		" pid=%ld.\n", __func__, vha->host_no, sp, serial));
 
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
-		if (ha->isp_ops->abort_command(vha, sp, req)) {
+		if (ha->isp_ops->abort_command(sp)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			"mbx failed.\n", __func__, vha->host_no));
 			ret = FAILED;
@@ -777,7 +842,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
 		return status;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	req = sp->que;
+	req = vha->req;
 	for (cnt = 1; status == QLA_SUCCESS &&
 		cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 		sp = req->outstanding_cmds[cnt];
@@ -820,7 +885,7 @@ static char *reset_errors[] = {
 
 static int
 __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
-    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
+    struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int, int))
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -841,7 +906,8 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 	if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
 		goto eh_reset_failed;
 	err = 2;
-	if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
+	if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
+		!= QLA_SUCCESS)
 		goto eh_reset_failed;
 	err = 3;
 	if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
@@ -996,6 +1062,9 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 		if (qla2x00_vp_abort_isp(vha))
 			goto eh_host_reset_lock;
 	} else {
+		if (ha->wq)
+			flush_workqueue(ha->wq);
+
 		set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 		if (qla2x00_abort_isp(base_vha)) {
 			clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
@@ -1037,7 +1106,8 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
 	struct fc_port *fcport;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (ha->flags.enable_lip_full_login && !vha->vp_idx) {
+	if (ha->flags.enable_lip_full_login && !vha->vp_idx &&
+	    !IS_QLA81XX(ha)) {
 		ret = qla2x00_full_login_lip(vha);
 		if (ret != QLA_SUCCESS) {
 			DEBUG2_3(printk("%s(%ld): failed: "
@@ -1064,7 +1134,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
 			if (fcport->port_type != FCT_TARGET)
 				continue;
 
-			ret = ha->isp_ops->target_reset(fcport, 0);
+			ret = ha->isp_ops->target_reset(fcport, 0, 0);
 			if (ret != QLA_SUCCESS) {
 				DEBUG2_3(printk("%s(%ld): bus_reset failed: "
 				    "target_reset=%d d_id=%x.\n", __func__,
@@ -1088,7 +1158,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < ha->max_queues; que++) {
+	for (que = 0; que < ha->max_req_queues; que++) {
 		req = ha->req_q_map[que];
 		if (!req)
 			continue;
@@ -1123,7 +1193,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
-	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+	struct req_que *req = vha->req;
 
 	if (sdev->tagged_supported)
 		scsi_activate_tcq(sdev, req->max_q_depth);
@@ -1511,6 +1581,13 @@ qla2x00_set_isp_flags(struct qla_hw_data *ha)
 		ha->fw_srisc_address = RISC_START_ADDRESS_2400;
 		break;
 	}
+
+	/* Get adapter physical port no from interrupt pin register. */
+	pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
+	if (ha->port_no & 1)
+		ha->flags.port0 = 1;
+	else
+		ha->flags.port0 = 0;
 }
 
 static int
@@ -1518,6 +1595,7 @@ qla2x00_iospace_config(struct qla_hw_data *ha)
 {
 	resource_size_t pio;
 	uint16_t msix;
+	int cpus;
 
 	if (pci_request_selected_regions(ha->pdev, ha->bars,
 	    QLA2XXX_DRIVER_NAME)) {
@@ -1571,8 +1649,9 @@ skip_pio:
 	}
 
 	/* Determine queue resources */
-	ha->max_queues = 1;
-	if (ql2xmaxqueues <= 1 || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
+	ha->max_req_queues = ha->max_rsp_queues = 1;
+	if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+		(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
 	ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
 			pci_resource_len(ha->pdev, 3));
@@ -1582,18 +1661,24 @@ skip_pio:
 		ha->msix_count = msix;
 		/* Max queues are bounded by available msix vectors */
 		/* queue 0 uses two msix vectors */
-		if (ha->msix_count - 1 < ql2xmaxqueues)
-			ha->max_queues = ha->msix_count - 1;
-		else if (ql2xmaxqueues > QLA_MQ_SIZE)
-			ha->max_queues = QLA_MQ_SIZE;
-		else
-			ha->max_queues = ql2xmaxqueues;
+		if (ql2xmultique_tag) {
+			cpus = num_online_cpus();
+			ha->max_rsp_queues = (ha->msix_count - 1 - cpus) ?
+				(cpus + 1) : (ha->msix_count - 1);
+			ha->max_req_queues = 2;
+		} else if (ql2xmaxqueues > 1) {
+			ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ?
+						QLA_MQ_SIZE : ql2xmaxqueues;
+			DEBUG2(qla_printk(KERN_INFO, ha, "QoS mode set, max no"
+			" of request queues:%d\n", ha->max_req_queues));
+		}
 		qla_printk(KERN_INFO, ha,
 			"MSI-X vector count: %d\n", msix);
-	}
+	} else
+		qla_printk(KERN_INFO, ha, "BAR 3 not enabled\n");
 
 mqiobase_exit:
-	ha->msix_count = ha->max_queues + 1;
+	ha->msix_count = ha->max_rsp_queues + 1;
 	return (0);
 
 iospace_error_exit:
@@ -1605,6 +1690,9 @@ qla2xxx_scan_start(struct Scsi_Host *shost)
 {
 	scsi_qla_host_t *vha = shost_priv(shost);
 
+	if (vha->hw->flags.running_gold_fw)
+		return;
+
 	set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
 	set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
 	set_bit(RSCN_UPDATE, &vha->dpc_flags);
@@ -1768,6 +1856,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
 		ha->gid_list_info_size = 8;
 		ha->optrom_size = OPTROM_SIZE_81XX;
+		ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
 		ha->isp_ops = &qla81xx_isp_ops;
 		ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
 		ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
@@ -1803,14 +1892,15 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 		ret = -ENOMEM;
 		qla2x00_mem_free(ha);
-		qla2x00_free_que(ha, req, rsp);
+		qla2x00_free_req_que(ha, req);
+		qla2x00_free_rsp_que(ha, rsp);
 		goto probe_hw_failed;
 	}
 
 	pci_set_drvdata(pdev, base_vha);
 
 	host = base_vha->host;
-	base_vha->req_ques[0] = req->id;
+	base_vha->req = req;
 	host->can_queue = req->length + 128;
 	if (IS_QLA2XXX_MIDTYPE(ha))
 		base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
@@ -1841,7 +1931,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	ha->rsp_q_map[0] = rsp;
 	ha->req_q_map[0] = req;
-
+	rsp->req = req;
+	req->rsp = rsp;
+	set_bit(0, ha->req_qid_map);
+	set_bit(0, ha->rsp_qid_map);
 	/* FWI2-capable only. */
 	req->req_q_in = &ha->iobase->isp24.req_q_in;
 	req->req_q_out = &ha->iobase->isp24.req_q_out;
@@ -1866,6 +1959,15 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto probe_failed;
 	}
 
+	if (ha->mqenable)
+		if (qla25xx_setup_mode(base_vha))
+			qla_printk(KERN_WARNING, ha,
+				"Can't create queues, falling back to single"
+				" queue mode\n");
+
+	if (ha->flags.running_gold_fw)
+		goto skip_dpc;
+
 	/*
 	 * Startup the kernel thread for this host adapter
 	 */
@@ -1878,6 +1980,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto probe_failed;
 	}
 
+skip_dpc:
 	list_add_tail(&base_vha->list, &ha->vp_list);
 	base_vha->host->irq = ha->pdev->irq;
 
@@ -1917,8 +2020,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 probe_init_failed:
-	qla2x00_free_que(ha, req, rsp);
-	ha->max_queues = 0;
+	qla2x00_free_req_que(ha, req);
+	qla2x00_free_rsp_que(ha, rsp);
+	ha->max_req_queues = ha->max_rsp_queues = 0;
 
 probe_failed:
 	if (base_vha->timer_active)
@@ -1976,6 +2080,13 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	base_vha->flags.online = 0;
 
+	/* Flush the work queue and remove it */
+	if (ha->wq) {
+		flush_workqueue(ha->wq);
+		destroy_workqueue(ha->wq);
+		ha->wq = NULL;
+	}
+
 	/* Kill the kernel thread for this host */
 	if (ha->dpc_thread) {
 		struct task_struct *t = ha->dpc_thread;
@@ -2017,6 +2128,8 @@ qla2x00_free_device(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
 
+	qla25xx_delete_queues(vha);
+
 	if (ha->flags.fce_enabled)
 		qla2x00_disable_fce_trace(vha, NULL, NULL);
 
@@ -2329,6 +2442,14 @@ qla2x00_mem_free(struct qla_hw_data *ha)
 		vfree(ha->fw_dump);
 	}
 
+	if (ha->dcbx_tlv)
+		dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+		    ha->dcbx_tlv, ha->dcbx_tlv_dma);
+
+	if (ha->xgmac_data)
+		dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+		    ha->xgmac_data, ha->xgmac_data_dma);
+
 	if (ha->sns_cmd)
 		dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
 		ha->sns_cmd, ha->sns_cmd_dma);
@@ -2412,6 +2533,8 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
 	INIT_LIST_HEAD(&vha->work_list);
 	INIT_LIST_HEAD(&vha->list);
 
+	spin_lock_init(&vha->work_lock);
+
 	sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
 	return vha;
 
@@ -2420,13 +2543,11 @@ fail:
 }
 
 static struct qla_work_evt *
-qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
-    int locked)
+qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
 {
 	struct qla_work_evt *e;
 
-	e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
-	    GFP_KERNEL);
+	e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
 	if (!e)
 		return NULL;
 
@@ -2437,17 +2558,15 @@ qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
 }
 
 static int
-qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e, int locked)
+qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
 {
-	unsigned long uninitialized_var(flags);
-	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags;
 
-	if (!locked)
-		spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&vha->work_lock, flags);
 	list_add_tail(&e->list, &vha->work_list);
+	spin_unlock_irqrestore(&vha->work_lock, flags);
 	qla2xxx_wake_dpc(vha);
-	if (!locked)
-		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
 	return QLA_SUCCESS;
 }
 
@@ -2457,13 +2576,13 @@ qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code,
 {
 	struct qla_work_evt *e;
 
-	e = qla2x00_alloc_work(vha, QLA_EVT_AEN, 1);
+	e = qla2x00_alloc_work(vha, QLA_EVT_AEN);
 	if (!e)
 		return QLA_FUNCTION_FAILED;
 
 	e->u.aen.code = code;
 	e->u.aen.data = data;
-	return qla2x00_post_work(vha, e, 1);
+	return qla2x00_post_work(vha, e);
 }
 
 int
@@ -2471,25 +2590,27 @@ qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
 {
 	struct qla_work_evt *e;
 
-	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+	e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK);
 	if (!e)
 		return QLA_FUNCTION_FAILED;
 
 	memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
-	return qla2x00_post_work(vha, e, 1);
+	return qla2x00_post_work(vha, e);
 }
 
 static void
 qla2x00_do_work(struct scsi_qla_host *vha)
 {
-	struct qla_work_evt *e;
-	struct qla_hw_data *ha = vha->hw;
+	struct qla_work_evt *e, *tmp;
+	unsigned long flags;
+	LIST_HEAD(work);
 
-	spin_lock_irq(&ha->hardware_lock);
-	while (!list_empty(&vha->work_list)) {
-		e = list_entry(vha->work_list.next, struct qla_work_evt, list);
+	spin_lock_irqsave(&vha->work_lock, flags);
+	list_splice_init(&vha->work_list, &work);
+	spin_unlock_irqrestore(&vha->work_lock, flags);
+
+	list_for_each_entry_safe(e, tmp, &work, list) {
 		list_del_init(&e->list);
-		spin_unlock_irq(&ha->hardware_lock);
 
 		switch (e->type) {
 		case QLA_EVT_AEN:
@@ -2502,10 +2623,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
-		spin_lock_irq(&ha->hardware_lock);
 	}
-	spin_unlock_irq(&ha->hardware_lock);
 }
+
 /* Relogins all the fcports of a vport
  * Context: dpc thread
  */
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 152ecfc26cd..6260505dceb 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -219,8 +219,8 @@ qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, uint16_t data)
 	wait_cnt = NVR_WAIT_CNT;
 	do {
 		if (!--wait_cnt) {
-			DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
-			    __func__, vha->host_no));
+			DEBUG9_10(qla_printk(KERN_WARNING, ha,
+			    "NVRAM didn't go ready...\n"));
 			break;
 		}
 		NVRAM_DELAY();
@@ -349,7 +349,7 @@ qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
 		wait_cnt = NVR_WAIT_CNT;
 		do {
 			if (!--wait_cnt) {
-				DEBUG9_10(qla_printk(
+				DEBUG9_10(qla_printk(KERN_WARNING, ha,
 				    "NVRAM didn't go ready...\n"));
 				break;
 			}
@@ -408,7 +408,8 @@ qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
 	wait_cnt = NVR_WAIT_CNT;
 	do {
 		if (!--wait_cnt) {
-			DEBUG9_10(qla_printk("NVRAM didn't go ready...\n"));
+			DEBUG9_10(qla_printk(KERN_WARNING, ha,
+			    "NVRAM didn't go ready...\n"));
 			break;
 		}
 		NVRAM_DELAY();
@@ -701,32 +702,35 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 			break;
 		case FLT_REG_VPD_0:
 			ha->flt_region_vpd_nvram = start;
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_VPD_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_NVRAM_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_NVRAM_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_FDT:
 			ha->flt_region_fdt = start;
 			break;
 		case FLT_REG_NPIV_CONF_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
 		case FLT_REG_NPIV_CONF_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
+		case FLT_REG_GOLD_FW:
+			ha->flt_region_gold_fw = start;
+			break;
 		}
 	}
 	goto done;
@@ -744,12 +748,12 @@ no_flash_data:
 	ha->flt_region_fw = def_fw[def];
 	ha->flt_region_boot = def_boot[def];
 	ha->flt_region_vpd_nvram = def_vpd_nvram[def];
-	ha->flt_region_vpd = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_vpd = ha->flags.port0 ?
 	    def_vpd0[def]: def_vpd1[def];
-	ha->flt_region_nvram = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_nvram = ha->flags.port0 ?
 	    def_nvram0[def]: def_nvram1[def];
 	ha->flt_region_fdt = def_fdt[def];
-	ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_npiv_conf = ha->flags.port0 ?
 	    def_npiv_conf0[def]: def_npiv_conf1[def];
 done:
 	DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
@@ -924,6 +928,8 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 		struct fc_vport_identifiers vid;
 		struct fc_vport *vport;
 
+		memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
+
 		flags = le16_to_cpu(entry->flags);
 		if (flags == 0xffff)
 			continue;
@@ -937,9 +943,7 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 		vid.port_name = wwn_to_u64(entry->port_name);
 		vid.node_name = wwn_to_u64(entry->node_name);
 
-		memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
-
-		DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx "
+		DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
 			"wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
 			vid.port_name, vid.node_name, le16_to_cpu(entry->vf_id),
 			entry->q_qos, entry->f_qos));
@@ -955,7 +959,6 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
 	}
 done:
 	kfree(data);
-	ha->npiv_info = NULL;
 }
 
 static int
@@ -1079,8 +1082,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 				    0xff0000) | ((fdata >> 16) & 0xff));
 			ret = qla24xx_erase_sector(vha, fdata);
 			if (ret != QLA_SUCCESS) {
-				DEBUG9(qla_printk("Unable to erase sector: "
-				    "address=%x.\n", faddr));
+				DEBUG9(qla_printk(KERN_WARNING, ha,
+				    "Unable to erase sector: address=%x.\n",
+				    faddr));
 				break;
 			}
 		}
@@ -1240,8 +1244,9 @@ qla24xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr,
 		ret = qla24xx_write_flash_dword(ha,
 		    nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
 		if (ret != QLA_SUCCESS) {
-			DEBUG9(qla_printk("Unable to program nvram address=%x "
-			    "data=%x.\n", naddr, *dwptr));
+			DEBUG9(qla_printk(KERN_WARNING, ha,
+			    "Unable to program nvram address=%x data=%x.\n",
+			    naddr, *dwptr));
 			break;
 		}
 	}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 19d1afc3a34..b63feaf4312 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.01-k1"
+#define QLA2XXX_VERSION      "8.03.01-k3"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 166417a6afb..2de5f3ad640 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1225,8 +1225,8 @@ EXPORT_SYMBOL(__scsi_device_lookup_by_target);
  * @starget:	SCSI target pointer
  * @lun:	SCSI Logical Unit Number
  *
- * Description: Looks up the scsi_device with the specified @channel, @id, @lun
- * for a given host.  The returned scsi_device has an additional reference that
+ * Description: Looks up the scsi_device with the specified @lun for a given
+ * @starget.  The returned scsi_device has an additional reference that
  * needs to be released with scsi_device_put once you're done with it.
  **/
 struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 213123b0486..41a21772df1 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -887,7 +887,7 @@ static int resp_start_stop(struct scsi_cmnd * scp,
 static sector_t get_sdebug_capacity(void)
 {
 	if (scsi_debug_virtual_gb > 0)
-		return 2048 * 1024 * scsi_debug_virtual_gb;
+		return 2048 * 1024 * (sector_t)scsi_debug_virtual_gb;
 	else
 		return sdebug_store_sectors;
 }
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 0c2c73be197..a1689353d7f 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -641,9 +641,9 @@ EXPORT_SYMBOL(scsi_eh_prep_cmnd);
 /**
  * scsi_eh_restore_cmnd  - Restore a scsi command info as part of error recory
  * @scmd:       SCSI command structure to restore
- * @ses:        saved information from a coresponding call to scsi_prep_eh_cmnd
+ * @ses:        saved information from a coresponding call to scsi_eh_prep_cmnd
  *
- * Undo any damage done by above scsi_prep_eh_cmnd().
+ * Undo any damage done by above scsi_eh_prep_cmnd().
  */
 void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 {
@@ -1451,28 +1451,21 @@ static void eh_lock_door_done(struct request *req, int uptodate)
  * @sdev:	SCSI device to prevent medium removal
  *
  * Locking:
- * 	We must be called from process context; scsi_allocate_request()
- * 	may sleep.
+ * 	We must be called from process context.
  *
  * Notes:
  * 	We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
  * 	head of the devices request queue, and continue.
- *
- * Bugs:
- * 	scsi_allocate_request() may sleep waiting for existing requests to
- * 	be processed.  However, since we haven't kicked off any request
- * 	processing for this host, this may deadlock.
- *
- *	If scsi_allocate_request() fails for what ever reason, we
- *	completely forget to lock the door.
  */
 static void scsi_eh_lock_door(struct scsi_device *sdev)
 {
 	struct request *req;
 
+	/*
+	 * blk_get_request with GFP_KERNEL (__GFP_WAIT) sleeps until a
+	 * request becomes available
+	 */
 	req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL);
-	if (!req)
-		return;
 
 	req->cmd[0] = ALLOW_MEDIUM_REMOVAL;
 	req->cmd[1] = 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index bb218c8b6e9..30f3275e119 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -240,11 +240,11 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	 * is invalid.  Prevent the garbage from being misinterpreted
 	 * and prevent security leaks by zeroing out the excess data.
 	 */
-	if (unlikely(req->data_len > 0 && req->data_len <= bufflen))
-		memset(buffer + (bufflen - req->data_len), 0, req->data_len);
+	if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
+		memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
 
 	if (resid)
-		*resid = req->data_len;
+		*resid = req->resid_len;
 	ret = req->errors;
  out:
 	blk_put_request(req);
@@ -546,14 +546,9 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
 	 * to queue the remainder of them.
 	 */
 	if (blk_end_request(req, error, bytes)) {
-		int leftover = (req->hard_nr_sectors << 9);
-
-		if (blk_pc_request(req))
-			leftover = req->data_len;
-
 		/* kill remainder if no retrys */
 		if (error && scsi_noretry_cmd(cmd))
-			blk_end_request(req, error, leftover);
+			blk_end_request_all(req, error);
 		else {
 			if (requeue) {
 				/*
@@ -673,34 +668,6 @@ void scsi_release_buffers(struct scsi_cmnd *cmd)
 EXPORT_SYMBOL(scsi_release_buffers);
 
 /*
- * Bidi commands Must be complete as a whole, both sides at once.
- * If part of the bytes were written and lld returned
- * scsi_in()->resid and/or scsi_out()->resid this information will be left
- * in req->data_len and req->next_rq->data_len. The upper-layer driver can
- * decide what to do with this information.
- */
-static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
-{
-	struct request *req = cmd->request;
-	unsigned int dlen = req->data_len;
-	unsigned int next_dlen = req->next_rq->data_len;
-
-	req->data_len = scsi_out(cmd)->resid;
-	req->next_rq->data_len = scsi_in(cmd)->resid;
-
-	/* The req and req->next_rq have not been completed */
-	BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen));
-
-	scsi_release_buffers(cmd);
-
-	/*
-	 * This will goose the queue request function at the end, so we don't
-	 * need to worry about launching another command.
-	 */
-	scsi_next_command(cmd);
-}
-
-/*
  * Function:    scsi_io_completion()
  *
  * Purpose:     Completion processing for block device I/O requests.
@@ -739,7 +706,6 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
 void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
 	int result = cmd->result;
-	int this_count;
 	struct request_queue *q = cmd->device->request_queue;
 	struct request *req = cmd->request;
 	int error = 0;
@@ -773,12 +739,22 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 			if (!sense_deferred)
 				error = -EIO;
 		}
+
+		req->resid_len = scsi_get_resid(cmd);
+
 		if (scsi_bidi_cmnd(cmd)) {
-			/* will also release_buffers */
-			scsi_end_bidi_request(cmd);
+			/*
+			 * Bidi commands Must be complete as a whole,
+			 * both sides at once.
+			 */
+			req->next_rq->resid_len = scsi_in(cmd)->resid;
+
+			blk_end_request_all(req, 0);
+
+			scsi_release_buffers(cmd);
+			scsi_next_command(cmd);
 			return;
 		}
-		req->data_len = scsi_get_resid(cmd);
 	}
 
 	BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */
@@ -787,9 +763,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	 * Next deal with any sectors which we were able to correctly
 	 * handle.
 	 */
-	SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, "
+	SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, "
 				      "%d bytes done.\n",
-				      req->nr_sectors, good_bytes));
+				      blk_rq_sectors(req), good_bytes));
 
 	/*
 	 * Recovered errors need reporting, but they're always treated
@@ -812,7 +788,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	 */
 	if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
 		return;
-	this_count = blk_rq_bytes(req);
 
 	error = -EIO;
 
@@ -922,7 +897,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 			if (driver_byte(result) & DRIVER_SENSE)
 				scsi_print_sense("", cmd);
 		}
-		blk_end_request(req, -EIO, blk_rq_bytes(req));
+		blk_end_request_all(req, -EIO);
 		scsi_next_command(cmd);
 		break;
 	case ACTION_REPREP:
@@ -965,10 +940,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
 	count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
 	BUG_ON(count > sdb->table.nents);
 	sdb->table.nents = count;
-	if (blk_pc_request(req))
-		sdb->length = req->data_len;
-	else
-		sdb->length = req->nr_sectors << 9;
+	sdb->length = blk_rq_bytes(req);
 	return BLKPREP_OK;
 }
 
@@ -1087,22 +1059,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
 		if (unlikely(ret))
 			return ret;
 	} else {
-		BUG_ON(req->data_len);
-		BUG_ON(req->data);
+		BUG_ON(blk_rq_bytes(req));
 
 		memset(&cmd->sdb, 0, sizeof(cmd->sdb));
 		req->buffer = NULL;
 	}
 
 	cmd->cmd_len = req->cmd_len;
-	if (!req->data_len)
+	if (!blk_rq_bytes(req))
 		cmd->sc_data_direction = DMA_NONE;
 	else if (rq_data_dir(req) == WRITE)
 		cmd->sc_data_direction = DMA_TO_DEVICE;
 	else
 		cmd->sc_data_direction = DMA_FROM_DEVICE;
 	
-	cmd->transfersize = req->data_len;
+	cmd->transfersize = blk_rq_bytes(req);
 	cmd->allowed = req->retries;
 	return BLKPREP_OK;
 }
@@ -1212,7 +1183,7 @@ int scsi_prep_return(struct request_queue *q, struct request *req, int ret)
 		break;
 	case BLKPREP_DEFER:
 		/*
-		 * If we defer, the elv_next_request() returns NULL, but the
+		 * If we defer, the blk_peek_request() returns NULL, but the
 		 * queue must be restarted, so we plug here if no returning
 		 * command will automatically do that.
 		 */
@@ -1388,7 +1359,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q)
 	struct scsi_target *starget = scsi_target(sdev);
 	struct Scsi_Host *shost = sdev->host;
 
-	blkdev_dequeue_request(req);
+	blk_start_request(req);
 
 	if (unlikely(cmd == NULL)) {
 		printk(KERN_CRIT "impossible request in %s.\n",
@@ -1480,7 +1451,7 @@ static void scsi_request_fn(struct request_queue *q)
 
 	if (!sdev) {
 		printk("scsi: killing requests for dead queue\n");
-		while ((req = elv_next_request(q)) != NULL)
+		while ((req = blk_peek_request(q)) != NULL)
 			scsi_kill_request(req, q);
 		return;
 	}
@@ -1501,7 +1472,7 @@ static void scsi_request_fn(struct request_queue *q)
 		 * that the request is fully prepared even if we cannot 
 		 * accept it.
 		 */
-		req = elv_next_request(q);
+		req = blk_peek_request(q);
 		if (!req || !scsi_dev_queue_ready(q, sdev))
 			break;
 
@@ -1517,7 +1488,7 @@ static void scsi_request_fn(struct request_queue *q)
 		 * Remove the request from the request list.
 		 */
 		if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req)))
-			blkdev_dequeue_request(req);
+			blk_start_request(req);
 		sdev->device_busy++;
 
 		spin_unlock(q->queue_lock);
@@ -2441,20 +2412,18 @@ int
 scsi_internal_device_unblock(struct scsi_device *sdev)
 {
 	struct request_queue *q = sdev->request_queue; 
-	int err;
 	unsigned long flags;
 	
 	/* 
 	 * Try to transition the scsi device to SDEV_RUNNING
 	 * and goose the device queue if successful.  
 	 */
-	err = scsi_device_set_state(sdev, SDEV_RUNNING);
-	if (err) {
-		err = scsi_device_set_state(sdev, SDEV_CREATED);
-
-		if (err)
-			return err;
-	}
+	if (sdev->sdev_state == SDEV_BLOCK)
+		sdev->sdev_state = SDEV_RUNNING;
+	else if (sdev->sdev_state == SDEV_CREATED_BLOCK)
+		sdev->sdev_state = SDEV_CREATED;
+	else
+		return -EINVAL;
 
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_start_queue(q);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 6f51ca485f3..c4478380140 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -115,12 +115,12 @@ MODULE_PARM_DESC(max_report_luns,
 		 "REPORT LUNS maximum number of LUNS received (should be"
 		 " between 1 and 16384)");
 
-static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
 
 module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(inq_timeout, 
 		 "Timeout (in seconds) waiting for devices to answer INQUIRY."
-		 " Default is 5. Some non-compliant devices need more.");
+		 " Default is 20. Some devices may need more; most need less.");
 
 /* This lock protects only this list */
 static DEFINE_SPINLOCK(async_scan_lock);
@@ -425,6 +425,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 	INIT_LIST_HEAD(&starget->devices);
 	starget->state = STARGET_CREATED;
 	starget->scsi_level = SCSI_2;
+	starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
  retry:
 	spin_lock_irqsave(shost->host_lock, flags);
 
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 48ba413f7f6..10303272ba4 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
 	 * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
 	 * length for us.
 	 */
-	cmd->sdb.length = rq->data_len;
+	cmd->sdb.length = blk_rq_bytes(rq);
 
 	return 0;
 
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 09479545529..f3e664628d7 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -37,7 +37,6 @@
 #define ISCSI_TRANSPORT_VERSION "2.0-870"
 
 struct iscsi_internal {
-	int daemon_pid;
 	struct scsi_transport_template t;
 	struct iscsi_transport *iscsi_transport;
 	struct list_head list;
@@ -357,7 +356,7 @@ int iscsi_session_chkready(struct iscsi_cls_session *session)
 		err = 0;
 		break;
 	case ISCSI_SESSION_FAILED:
-		err = DID_TRANSPORT_DISRUPTED << 16;
+		err = DID_IMM_RETRY << 16;
 		break;
 	case ISCSI_SESSION_FREE:
 		err = DID_TRANSPORT_FAILFAST << 16;
@@ -938,23 +937,9 @@ iscsi_if_transport_lookup(struct iscsi_transport *tt)
 }
 
 static int
-iscsi_broadcast_skb(struct sk_buff *skb, gfp_t gfp)
+iscsi_multicast_skb(struct sk_buff *skb, uint32_t group, gfp_t gfp)
 {
-	return netlink_broadcast(nls, skb, 0, 1, gfp);
-}
-
-static int
-iscsi_unicast_skb(struct sk_buff *skb, int pid)
-{
-	int rc;
-
-	rc = netlink_unicast(nls, skb, pid, MSG_DONTWAIT);
-	if (rc < 0) {
-		printk(KERN_ERR "iscsi: can not unicast skb (%d)\n", rc);
-		return rc;
-	}
-
-	return 0;
+	return nlmsg_multicast(nls, skb, 0, group, gfp);
 }
 
 int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
@@ -980,7 +965,7 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	memset(ev, 0, sizeof(*ev));
 	ev->transport_handle = iscsi_handle(conn->transport);
@@ -991,10 +976,45 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 	memcpy(pdu, hdr, sizeof(struct iscsi_hdr));
 	memcpy(pdu + sizeof(struct iscsi_hdr), data, data_size);
 
-	return iscsi_unicast_skb(skb, priv->daemon_pid);
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(iscsi_recv_pdu);
 
+int iscsi_offload_mesg(struct Scsi_Host *shost,
+		       struct iscsi_transport *transport, uint32_t type,
+		       char *data, uint16_t data_size)
+{
+	struct nlmsghdr	*nlh;
+	struct sk_buff *skb;
+	struct iscsi_uevent *ev;
+	int len = NLMSG_SPACE(sizeof(*ev) + data_size);
+
+	skb = alloc_skb(len, GFP_NOIO);
+	if (!skb) {
+		printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
+		return -ENOMEM;
+	}
+
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
+	ev = NLMSG_DATA(nlh);
+	memset(ev, 0, sizeof(*ev));
+	ev->type = type;
+	ev->transport_handle = iscsi_handle(transport);
+	switch (type) {
+	case ISCSI_KEVENT_PATH_REQ:
+		ev->r.req_path.host_no = shost->host_no;
+		break;
+	case ISCSI_KEVENT_IF_DOWN:
+		ev->r.notify_if_down.host_no = shost->host_no;
+		break;
+	}
+
+	memcpy((char *)ev + sizeof(*ev), data, data_size);
+
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+}
+EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
+
 void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 {
 	struct nlmsghdr	*nlh;
@@ -1014,7 +1034,7 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 		return;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	ev->transport_handle = iscsi_handle(conn->transport);
 	ev->type = ISCSI_KEVENT_CONN_ERROR;
@@ -1022,7 +1042,7 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 	ev->r.connerror.cid = conn->cid;
 	ev->r.connerror.sid = iscsi_conn_get_sid(conn);
 
-	iscsi_broadcast_skb(skb, GFP_ATOMIC);
+	iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
 
 	iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n",
 			      error);
@@ -1030,8 +1050,8 @@ void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
 EXPORT_SYMBOL_GPL(iscsi_conn_error_event);
 
 static int
-iscsi_if_send_reply(int pid, int seq, int type, int done, int multi,
-		      void *payload, int size)
+iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi,
+		    void *payload, int size)
 {
 	struct sk_buff	*skb;
 	struct nlmsghdr	*nlh;
@@ -1045,10 +1065,10 @@ iscsi_if_send_reply(int pid, int seq, int type, int done, int multi,
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, pid, seq, t, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, t, (len - sizeof(*nlh)), 0);
 	nlh->nlmsg_flags = flags;
 	memcpy(NLMSG_DATA(nlh), payload, size);
-	return iscsi_unicast_skb(skb, pid);
+	return iscsi_multicast_skb(skb, group, GFP_ATOMIC);
 }
 
 static int
@@ -1085,7 +1105,7 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh)
 			return -ENOMEM;
 		}
 
-		nlhstat = __nlmsg_put(skbstat, priv->daemon_pid, 0, 0,
+		nlhstat = __nlmsg_put(skbstat, 0, 0, 0,
 				      (len - sizeof(*nlhstat)), 0);
 		evstat = NLMSG_DATA(nlhstat);
 		memset(evstat, 0, sizeof(*evstat));
@@ -1109,7 +1129,8 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh)
 		skb_trim(skbstat, NLMSG_ALIGN(actual_size));
 		nlhstat->nlmsg_len = actual_size;
 
-		err = iscsi_unicast_skb(skbstat, priv->daemon_pid);
+		err = iscsi_multicast_skb(skbstat, ISCSI_NL_GRP_ISCSID,
+					  GFP_ATOMIC);
 	} while (err < 0 && err != -ECONNREFUSED);
 
 	return err;
@@ -1143,7 +1164,7 @@ int iscsi_session_event(struct iscsi_cls_session *session,
 		return -ENOMEM;
 	}
 
-	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
 	ev = NLMSG_DATA(nlh);
 	ev->transport_handle = iscsi_handle(session->transport);
 
@@ -1172,7 +1193,7 @@ int iscsi_session_event(struct iscsi_cls_session *session,
 	 * this will occur if the daemon is not up, so we just warn
 	 * the user and when the daemon is restarted it will handle it
 	 */
-	rc = iscsi_broadcast_skb(skb, GFP_KERNEL);
+	rc = iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL);
 	if (rc == -ESRCH)
 		iscsi_cls_session_printk(KERN_ERR, session,
 					 "Cannot notify userspace of session "
@@ -1268,26 +1289,54 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 	return err;
 }
 
+static int iscsi_if_ep_connect(struct iscsi_transport *transport,
+			       struct iscsi_uevent *ev, int msg_type)
+{
+	struct iscsi_endpoint *ep;
+	struct sockaddr *dst_addr;
+	struct Scsi_Host *shost = NULL;
+	int non_blocking, err = 0;
+
+	if (!transport->ep_connect)
+		return -EINVAL;
+
+	if (msg_type == ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST) {
+		shost = scsi_host_lookup(ev->u.ep_connect_through_host.host_no);
+		if (!shost) {
+			printk(KERN_ERR "ep connect failed. Could not find "
+			       "host no %u\n",
+			       ev->u.ep_connect_through_host.host_no);
+			return -ENODEV;
+		}
+		non_blocking = ev->u.ep_connect_through_host.non_blocking;
+	} else
+		non_blocking = ev->u.ep_connect.non_blocking;
+
+	dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
+	ep = transport->ep_connect(shost, dst_addr, non_blocking);
+	if (IS_ERR(ep)) {
+		err = PTR_ERR(ep);
+		goto release_host;
+	}
+
+	ev->r.ep_connect_ret.handle = ep->id;
+release_host:
+	if (shost)
+		scsi_host_put(shost);
+	return err;
+}
+
 static int
 iscsi_if_transport_ep(struct iscsi_transport *transport,
 		      struct iscsi_uevent *ev, int msg_type)
 {
 	struct iscsi_endpoint *ep;
-	struct sockaddr *dst_addr;
 	int rc = 0;
 
 	switch (msg_type) {
+	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
 	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
-		if (!transport->ep_connect)
-			return -EINVAL;
-
-		dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
-		ep = transport->ep_connect(dst_addr,
-					   ev->u.ep_connect.non_blocking);
-		if (IS_ERR(ep))
-			return PTR_ERR(ep);
-
-		ev->r.ep_connect_ret.handle = ep->id;
+		rc = iscsi_if_ep_connect(transport, ev, msg_type);
 		break;
 	case ISCSI_UEVENT_TRANSPORT_EP_POLL:
 		if (!transport->ep_poll)
@@ -1365,7 +1414,31 @@ iscsi_set_host_param(struct iscsi_transport *transport,
 }
 
 static int
-iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
+iscsi_set_path(struct iscsi_transport *transport, struct iscsi_uevent *ev)
+{
+	struct Scsi_Host *shost;
+	struct iscsi_path *params;
+	int err;
+
+	if (!transport->set_path)
+		return -ENOSYS;
+
+	shost = scsi_host_lookup(ev->u.set_path.host_no);
+	if (!shost) {
+		printk(KERN_ERR "set path could not find host no %u\n",
+		       ev->u.set_path.host_no);
+		return -ENODEV;
+	}
+
+	params = (struct iscsi_path *)((char *)ev + sizeof(*ev));
+	err = transport->set_path(shost, params);
+
+	scsi_host_put(shost);
+	return err;
+}
+
+static int
+iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
 {
 	int err = 0;
 	struct iscsi_uevent *ev = NLMSG_DATA(nlh);
@@ -1375,6 +1448,11 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	struct iscsi_cls_conn *conn;
 	struct iscsi_endpoint *ep = NULL;
 
+	if (nlh->nlmsg_type == ISCSI_UEVENT_PATH_UPDATE)
+		*group = ISCSI_NL_GRP_UIP;
+	else
+		*group = ISCSI_NL_GRP_ISCSID;
+
 	priv = iscsi_if_transport_lookup(iscsi_ptr(ev->transport_handle));
 	if (!priv)
 		return -EINVAL;
@@ -1383,8 +1461,6 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	if (!try_module_get(transport->owner))
 		return -EINVAL;
 
-	priv->daemon_pid = NETLINK_CREDS(skb)->pid;
-
 	switch (nlh->nlmsg_type) {
 	case ISCSI_UEVENT_CREATE_SESSION:
 		err = iscsi_if_create_session(priv, ep, ev,
@@ -1469,6 +1545,7 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
 	case ISCSI_UEVENT_TRANSPORT_EP_POLL:
 	case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT:
+	case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
 		err = iscsi_if_transport_ep(transport, ev, nlh->nlmsg_type);
 		break;
 	case ISCSI_UEVENT_TGT_DSCVR:
@@ -1477,6 +1554,9 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case ISCSI_UEVENT_SET_HOST_PARAM:
 		err = iscsi_set_host_param(transport, ev);
 		break;
+	case ISCSI_UEVENT_PATH_UPDATE:
+		err = iscsi_set_path(transport, ev);
+		break;
 	default:
 		err = -ENOSYS;
 		break;
@@ -1499,6 +1579,7 @@ iscsi_if_rx(struct sk_buff *skb)
 		uint32_t rlen;
 		struct nlmsghdr	*nlh;
 		struct iscsi_uevent *ev;
+		uint32_t group;
 
 		nlh = nlmsg_hdr(skb);
 		if (nlh->nlmsg_len < sizeof(*nlh) ||
@@ -1511,7 +1592,7 @@ iscsi_if_rx(struct sk_buff *skb)
 		if (rlen > skb->len)
 			rlen = skb->len;
 
-		err = iscsi_if_recv_msg(skb, nlh);
+		err = iscsi_if_recv_msg(skb, nlh, &group);
 		if (err) {
 			ev->type = ISCSI_KEVENT_IF_ERROR;
 			ev->iferror = err;
@@ -1525,8 +1606,7 @@ iscsi_if_rx(struct sk_buff *skb)
 			 */
 			if (ev->type == ISCSI_UEVENT_GET_STATS && !err)
 				break;
-			err = iscsi_if_send_reply(
-				NETLINK_CREDS(skb)->pid, nlh->nlmsg_seq,
+			err = iscsi_if_send_reply(group, nlh->nlmsg_seq,
 				nlh->nlmsg_type, 0, 0, ev, sizeof(*ev));
 		} while (err < 0 && err != -ECONNREFUSED);
 		skb_pull(skb, rlen);
@@ -1774,7 +1854,6 @@ iscsi_register_transport(struct iscsi_transport *tt)
 	if (!priv)
 		return NULL;
 	INIT_LIST_HEAD(&priv->list);
-	priv->daemon_pid = -1;
 	priv->iscsi_transport = tt;
 	priv->t.user_scan = iscsi_user_scan;
 	priv->t.create_work_queue = 1;
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 50988cbf7b2..d606452297c 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -163,12 +163,10 @@ static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost,
 	int (*handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
 
 	while (!blk_queue_plugged(q)) {
-		req = elv_next_request(q);
+		req = blk_fetch_request(q);
 		if (!req)
 			break;
 
-		blkdev_dequeue_request(req);
-
 		spin_unlock_irq(q->queue_lock);
 
 		handler = to_sas_internal(shost->transportt)->f->smp_handler;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 84044233b63..878b17a9af3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -384,9 +384,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	struct scsi_device *sdp = q->queuedata;
 	struct gendisk *disk = rq->rq_disk;
 	struct scsi_disk *sdkp;
-	sector_t block = rq->sector;
+	sector_t block = blk_rq_pos(rq);
 	sector_t threshold;
-	unsigned int this_count = rq->nr_sectors;
+	unsigned int this_count = blk_rq_sectors(rq);
 	int ret, host_dif;
 
 	if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
@@ -413,10 +413,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 					this_count));
 
 	if (!sdp || !scsi_device_online(sdp) ||
- 	    block + rq->nr_sectors > get_capacity(disk)) {
+	    block + blk_rq_sectors(rq) > get_capacity(disk)) {
 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
-						"Finishing %ld sectors\n",
-						rq->nr_sectors));
+						"Finishing %u sectors\n",
+						blk_rq_sectors(rq)));
 		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
 						"Retry with 0x%p\n", SCpnt));
 		goto out;
@@ -463,7 +463,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	 * for this.
 	 */
 	if (sdp->sector_size == 1024) {
-		if ((block & 1) || (rq->nr_sectors & 1)) {
+		if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
 			scmd_printk(KERN_ERR, SCpnt,
 				    "Bad block number requested\n");
 			goto out;
@@ -473,7 +473,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		}
 	}
 	if (sdp->sector_size == 2048) {
-		if ((block & 3) || (rq->nr_sectors & 3)) {
+		if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
 			scmd_printk(KERN_ERR, SCpnt,
 				    "Bad block number requested\n");
 			goto out;
@@ -483,7 +483,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		}
 	}
 	if (sdp->sector_size == 4096) {
-		if ((block & 7) || (rq->nr_sectors & 7)) {
+		if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
 			scmd_printk(KERN_ERR, SCpnt,
 				    "Bad block number requested\n");
 			goto out;
@@ -512,10 +512,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	}
 
 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
-					"%s %d/%ld 512 byte blocks.\n",
+					"%s %d/%u 512 byte blocks.\n",
 					(rq_data_dir(rq) == WRITE) ?
 					"writing" : "reading", this_count,
-					rq->nr_sectors));
+					blk_rq_sectors(rq)));
 
 	/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
 	host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
@@ -971,8 +971,8 @@ static struct block_device_operations sd_fops = {
 
 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 {
-	u64 start_lba = scmd->request->sector;
-	u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512);
+	u64 start_lba = blk_rq_pos(scmd->request);
+	u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
 	u64 bad_lba;
 	int info_valid;
 
@@ -1510,7 +1510,7 @@ got_data:
 		 */
 		sector_size = 512;
 	}
-	blk_queue_hardsect_size(sdp->request_queue, sector_size);
+	blk_queue_logical_block_size(sdp->request_queue, sector_size);
 
 	{
 		char cap_str_2[10], cap_str_10[10];
@@ -1902,24 +1902,6 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 	index = sdkp->index;
 	dev = &sdp->sdev_gendev;
 
-	if (!sdp->request_queue->rq_timeout) {
-		if (sdp->type != TYPE_MOD)
-			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
-		else
-			blk_queue_rq_timeout(sdp->request_queue,
-					     SD_MOD_TIMEOUT);
-	}
-
-	device_initialize(&sdkp->dev);
-	sdkp->dev.parent = &sdp->sdev_gendev;
-	sdkp->dev.class = &sd_disk_class;
-	dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
-
-	if (device_add(&sdkp->dev))
-		goto out_free_index;
-
-	get_device(&sdp->sdev_gendev);
-
 	if (index < SD_MAX_DISKS) {
 		gd->major = sd_major((index & 0xf0) >> 4);
 		gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
@@ -1954,11 +1936,6 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
-
-	return;
-
- out_free_index:
-	ida_remove(&sd_index_ida, index);
 }
 
 /**
@@ -2026,6 +2003,24 @@ static int sd_probe(struct device *dev)
 	sdkp->openers = 0;
 	sdkp->previous_state = 1;
 
+	if (!sdp->request_queue->rq_timeout) {
+		if (sdp->type != TYPE_MOD)
+			blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
+		else
+			blk_queue_rq_timeout(sdp->request_queue,
+					     SD_MOD_TIMEOUT);
+	}
+
+	device_initialize(&sdkp->dev);
+	sdkp->dev.parent = &sdp->sdev_gendev;
+	sdkp->dev.class = &sd_disk_class;
+	dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
+
+	if (device_add(&sdkp->dev))
+		goto out_free_index;
+
+	get_device(&sdp->sdev_gendev);
+
 	async_schedule(sd_probe_async, sdkp);
 
 	return 0;
@@ -2055,8 +2050,10 @@ static int sd_probe(struct device *dev)
  **/
 static int sd_remove(struct device *dev)
 {
-	struct scsi_disk *sdkp = dev_get_drvdata(dev);
+	struct scsi_disk *sdkp;
 
+	async_synchronize_full();
+	sdkp = dev_get_drvdata(dev);
 	device_del(&sdkp->dev);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 184dff49279..82f14a9482d 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -507,7 +507,7 @@ void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes)
 	sector_sz = scmd->device->sector_size;
 	sectors = good_bytes / sector_sz;
 
-	phys = scmd->request->sector & 0xffffffff;
+	phys = blk_rq_pos(scmd->request) & 0xffffffff;
 	if (sector_sz == 4096)
 		phys >>= 3;
 
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index e1716f14cd4..8201387b4da 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -289,8 +289,8 @@ sg_open(struct inode *inode, struct file *filp)
 	if (list_empty(&sdp->sfds)) {	/* no existing opens on this device */
 		sdp->sgdebug = 0;
 		q = sdp->device->request_queue;
-		sdp->sg_tablesize = min(q->max_hw_segments,
-					q->max_phys_segments);
+		sdp->sg_tablesize = min(queue_max_hw_segments(q),
+					queue_max_phys_segments(q));
 	}
 	if ((sfp = sg_add_sfp(sdp, dev)))
 		filp->private_data = sfp;
@@ -909,7 +909,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
                 if (val < 0)
                         return -EINVAL;
 		val = min_t(int, val,
-				sdp->device->request_queue->max_sectors * 512);
+			    queue_max_sectors(sdp->device->request_queue) * 512);
 		if (val != sfp->reserve.bufflen) {
 			if (sg_res_in_use(sfp) || sfp->mmap_called)
 				return -EBUSY;
@@ -919,7 +919,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 		return 0;
 	case SG_GET_RESERVED_SIZE:
 		val = min_t(int, sfp->reserve.bufflen,
-				sdp->device->request_queue->max_sectors * 512);
+			    queue_max_sectors(sdp->device->request_queue) * 512);
 		return put_user(val, ip);
 	case SG_SET_COMMAND_Q:
 		result = get_user(val, ip);
@@ -1059,12 +1059,13 @@ sg_ioctl(struct inode *inode, struct file *filp,
 			return -ENODEV;
 		return scsi_ioctl(sdp->device, cmd_in, p);
 	case BLKSECTGET:
-		return put_user(sdp->device->request_queue->max_sectors * 512,
+		return put_user(queue_max_sectors(sdp->device->request_queue) * 512,
 				ip);
 	case BLKTRACESETUP:
 		return blk_trace_setup(sdp->device->request_queue,
 				       sdp->disk->disk_name,
 				       MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
+				       NULL,
 				       (char *)arg);
 	case BLKTRACESTART:
 		return blk_trace_startstop(sdp->device->request_queue, 1);
@@ -1260,7 +1261,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate)
 
 	sense = rq->sense;
 	result = rq->errors;
-	resid = rq->data_len;
+	resid = rq->resid_len;
 
 	SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n",
 		sdp->disk->disk_name, srp->header.pack_id, result));
@@ -1377,7 +1378,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp)
 	sdp->device = scsidp;
 	INIT_LIST_HEAD(&sdp->sfds);
 	init_waitqueue_head(&sdp->o_excl_wait);
-	sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments);
+	sdp->sg_tablesize = min(queue_max_hw_segments(q),
+				queue_max_phys_segments(q));
 	sdp->index = k;
 	kref_init(&sdp->d_ref);
 
@@ -2055,7 +2057,7 @@ sg_add_sfp(Sg_device * sdp, int dev)
 		sg_big_buff = def_reserved_size;
 
 	bufflen = min_t(int, sg_big_buff,
-			sdp->device->request_queue->max_sectors * 512);
+			queue_max_sectors(sdp->device->request_queue) * 512);
 	sg_build_reserve(sfp, bufflen);
 	SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp:   bufflen=%d, k_use_sg=%d\n",
 			   sfp->reserve.bufflen, sfp->reserve.k_use_sg));
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 0e1a0f2d2ad..cd350dfc121 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -292,7 +292,8 @@ static int sr_done(struct scsi_cmnd *SCpnt)
 			if (cd->device->sector_size == 2048)
 				error_sector <<= 2;
 			error_sector &= ~(block_sectors - 1);
-			good_bytes = (error_sector - SCpnt->request->sector) << 9;
+			good_bytes = (error_sector -
+				      blk_rq_pos(SCpnt->request)) << 9;
 			if (good_bytes < 0 || good_bytes >= this_count)
 				good_bytes = 0;
 			/*
@@ -349,8 +350,8 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
 				cd->disk->disk_name, block));
 
 	if (!cd->device || !scsi_device_online(cd->device)) {
-		SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
-					rq->nr_sectors));
+		SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n",
+					   blk_rq_sectors(rq)));
 		SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
 		goto out;
 	}
@@ -413,7 +414,7 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
 	/*
 	 * request doesn't start on hw block boundary, add scatter pads
 	 */
-	if (((unsigned int)rq->sector % (s_size >> 9)) ||
+	if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) ||
 	    (scsi_bufflen(SCpnt) % s_size)) {
 		scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
 		goto out;
@@ -422,14 +423,14 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq)
 	this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
 
 
-	SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
+	SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n",
 				cd->cdi.name,
 				(rq_data_dir(rq) == WRITE) ?
 					"writing" : "reading",
-				this_count, rq->nr_sectors));
+				this_count, blk_rq_sectors(rq)));
 
 	SCpnt->cmnd[1] = 0;
-	block = (unsigned int)rq->sector / (s_size >> 9);
+	block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9);
 
 	if (this_count > 0xffff) {
 		this_count = 0xffff;
@@ -726,7 +727,7 @@ static void get_sectorsize(struct scsi_cd *cd)
 	}
 
 	queue = cd->device->request_queue;
-	blk_queue_hardsect_size(queue, sector_size);
+	blk_queue_logical_block_size(queue, sector_size);
 
 	return;
 }
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index eb24efea8f1..b33d04250bb 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -463,7 +463,7 @@ static void st_scsi_execute_end(struct request *req, int uptodate)
 	struct scsi_tape *STp = SRpnt->stp;
 
 	STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
-	STp->buffer->cmdstat.residual = req->data_len;
+	STp->buffer->cmdstat.residual = req->resid_len;
 
 	if (SRpnt->waiting)
 		complete(SRpnt->waiting);
@@ -2964,7 +2964,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 			    !(STp->use_pf & PF_TESTED)) {
 				/* Try the other possible state of Page Format if not
 				   already tried */
-				STp->use_pf = !STp->use_pf | PF_TESTED;
+				STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
 				st_release_request(SRpnt);
 				SRpnt = NULL;
 				return st_int_ioctl(STp, cmd_in, arg);
@@ -3983,8 +3983,8 @@ static int st_probe(struct device *dev)
 		return -ENODEV;
 	}
 
-	i = min(SDp->request_queue->max_hw_segments,
-		SDp->request_queue->max_phys_segments);
+	i = min(queue_max_hw_segments(SDp->request_queue),
+		queue_max_phys_segments(SDp->request_queue));
 	if (st_max_sg_segs < i)
 		i = st_max_sg_segs;
 	buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 583966ec826..45374d66d26 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -737,11 +737,14 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 	struct sym_hcb *np = sym_get_hcb(sdev->host);
 	struct sym_tcb *tp = &np->target[sdev->id];
 	struct sym_lcb *lp;
+	unsigned long flags;
+	int error;
 
 	if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
 		return -ENXIO;
 
-	tp->starget = sdev->sdev_target;
+	spin_lock_irqsave(np->s.host->host_lock, flags);
+
 	/*
 	 * Fail the device init if the device is flagged NOSCAN at BOOT in
 	 * the NVRAM.  This may speed up boot and maintain coherency with
@@ -753,26 +756,37 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 
 	if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) {
 		tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
-		starget_printk(KERN_INFO, tp->starget,
+		starget_printk(KERN_INFO, sdev->sdev_target,
 				"Scan at boot disabled in NVRAM\n");
-		return -ENXIO;
+		error = -ENXIO;
+		goto out;
 	}
 
 	if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) {
-		if (sdev->lun != 0)
-			return -ENXIO;
-		starget_printk(KERN_INFO, tp->starget,
+		if (sdev->lun != 0) {
+			error = -ENXIO;
+			goto out;
+		}
+		starget_printk(KERN_INFO, sdev->sdev_target,
 				"Multiple LUNs disabled in NVRAM\n");
 	}
 
 	lp = sym_alloc_lcb(np, sdev->id, sdev->lun);
-	if (!lp)
-		return -ENOMEM;
+	if (!lp) {
+		error = -ENOMEM;
+		goto out;
+	}
+	if (tp->nlcb == 1)
+		tp->starget = sdev->sdev_target;
 
 	spi_min_period(tp->starget) = tp->usr_period;
 	spi_max_width(tp->starget) = tp->usr_width;
 
-	return 0;
+	error = 0;
+out:
+	spin_unlock_irqrestore(np->s.host->host_lock, flags);
+
+	return error;
 }
 
 /*
@@ -819,12 +833,34 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev)
 static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
 {
 	struct sym_hcb *np = sym_get_hcb(sdev->host);
-	struct sym_lcb *lp = sym_lp(&np->target[sdev->id], sdev->lun);
+	struct sym_tcb *tp = &np->target[sdev->id];
+	struct sym_lcb *lp = sym_lp(tp, sdev->lun);
+	unsigned long flags;
+
+	spin_lock_irqsave(np->s.host->host_lock, flags);
+
+	if (lp->busy_itlq || lp->busy_itl) {
+		/*
+		 * This really shouldn't happen, but we can't return an error
+		 * so let's try to stop all on-going I/O.
+		 */
+		starget_printk(KERN_WARNING, tp->starget,
+			       "Removing busy LCB (%d)\n", sdev->lun);
+		sym_reset_scsi_bus(np, 1);
+	}
 
-	if (lp->itlq_tbl)
-		sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK * 4, "ITLQ_TBL");
-	kfree(lp->cb_tags);
-	sym_mfree_dma(lp, sizeof(*lp), "LCB");
+	if (sym_free_lcb(np, sdev->id, sdev->lun) == 0) {
+		/*
+		 * It was the last unit for this target.
+		 */
+		tp->head.sval        = 0;
+		tp->head.wval        = np->rv_scntl3;
+		tp->head.uval        = 0;
+		tp->tgoal.check_nego = 1;
+		tp->starget	     = NULL;
+	}
+
+	spin_unlock_irqrestore(np->s.host->host_lock, flags);
 }
 
 /*
@@ -890,6 +926,8 @@ static void sym_exec_user_command (struct sym_hcb *np, struct sym_usrcmd *uc)
 			if (!((uc->target >> t) & 1))
 				continue;
 			tp = &np->target[t];
+			if (!tp->nlcb)
+				continue;
 
 			switch (uc->cmd) {
 
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index ffa70d1ed18..69ad4945c93 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -1896,6 +1896,15 @@ void sym_start_up(struct Scsi_Host *shost, int reason)
 		tp->head.sval = 0;
 		tp->head.wval = np->rv_scntl3;
 		tp->head.uval = 0;
+		if (tp->lun0p)
+			tp->lun0p->to_clear = 0;
+		if (tp->lunmp) {
+			int ln;
+
+			for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
+				if (tp->lunmp[ln])
+					tp->lunmp[ln]->to_clear = 0;
+		}
 	}
 
 	/*
@@ -4988,7 +4997,7 @@ struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
 	 */
 	if (ln && !tp->lunmp) {
 		tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
-				GFP_KERNEL);
+				GFP_ATOMIC);
 		if (!tp->lunmp)
 			goto fail;
 	}
@@ -5008,6 +5017,7 @@ struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
 		tp->lun0p = lp;
 		tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
 	}
+	tp->nlcb++;
 
 	/*
 	 *  Let the itl task point to error handling.
@@ -5085,6 +5095,43 @@ fail:
 }
 
 /*
+ *  Lun control block deallocation. Returns the number of valid remaing LCBs
+ *  for the target.
+ */
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
+{
+	struct sym_tcb *tp = &np->target[tn];
+	struct sym_lcb *lp = sym_lp(tp, ln);
+
+	tp->nlcb--;
+
+	if (ln) {
+		if (!tp->nlcb) {
+			kfree(tp->lunmp);
+			sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
+			tp->lunmp = NULL;
+			tp->luntbl = NULL;
+			tp->head.luntbl_sa = cpu_to_scr(vtobus(np->badluntbl));
+		} else {
+			tp->luntbl[ln] = cpu_to_scr(vtobus(&np->badlun_sa));
+			tp->lunmp[ln] = NULL;
+		}
+	} else {
+		tp->lun0p = NULL;
+		tp->head.lun0_sa = cpu_to_scr(vtobus(&np->badlun_sa));
+	}
+
+	if (lp->itlq_tbl) {
+		sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
+		kfree(lp->cb_tags);
+	}
+
+	sym_mfree_dma(lp, sizeof(*lp), "LCB");
+
+	return tp->nlcb;
+}
+
+/*
  *  Queue a SCSI IO to the controller.
  */
 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 9ebc8706b6b..053e63c8682 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -401,6 +401,7 @@ struct sym_tcb {
 	 *  An array of bus addresses is used on reselection.
 	 */
 	u32	*luntbl;	/* LCBs bus address table	*/
+	int	nlcb;		/* Number of valid LCBs (including LUN #0) */
 
 	/*
 	 *  LUN table used by the C code.
@@ -1065,6 +1066,7 @@ int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int
 struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order);
 void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp);
 struct sym_lcb *sym_alloc_lcb(struct sym_hcb *np, u_char tn, u_char ln);
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln);
 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
 int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *ccb, int timed_out);
 int sym_reset_scsi_target(struct sym_hcb *np, int target);
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 601e95141cb..54023d41fd1 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1306,7 +1306,7 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs
    if (linked_comm && SCpnt->device->queue_depth > 2
                                      && TLDEV(SCpnt->device->type)) {
       HD(j)->cp_stat[i] = READY;
-      flush_dev(SCpnt->device, SCpnt->request->sector, j, FALSE);
+      flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, FALSE);
       return 0;
       }
 
@@ -1610,11 +1610,13 @@ static int reorder(unsigned int j, unsigned long cursec,
 
       if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
 
-      if (SCpnt->request->sector < minsec) minsec = SCpnt->request->sector;
-      if (SCpnt->request->sector > maxsec) maxsec = SCpnt->request->sector;
+      if (blk_rq_pos(SCpnt->request) < minsec)
+	 minsec = blk_rq_pos(SCpnt->request);
+      if (blk_rq_pos(SCpnt->request) > maxsec)
+	 maxsec = blk_rq_pos(SCpnt->request);
 
-      sl[n] = SCpnt->request->sector;
-      ioseek += SCpnt->request->nr_sectors;
+      sl[n] = blk_rq_pos(SCpnt->request);
+      ioseek += blk_rq_sectors(SCpnt->request);
 
       if (!n) continue;
 
@@ -1642,7 +1644,7 @@ static int reorder(unsigned int j, unsigned long cursec,
 
    if (!input_only) for (n = 0; n < n_ready; n++) {
       k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
-      ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->serial_number;
+      ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number;
 
       if (!n) continue;
 
@@ -1666,12 +1668,12 @@ static int reorder(unsigned int j, unsigned long cursec,
    if (link_statistics && (overlap || !(flushcount % link_statistics)))
       for (n = 0; n < n_ready; n++) {
          k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
-         printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\
+         printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\
                 " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
                 (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
                 SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
-                SCpnt->request->sector, SCpnt->request->nr_sectors, cursec,
-                YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
+                blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request),
+		cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
                 YESNO(overlap), cpp->xdir);
          }
 #endif
@@ -1799,7 +1801,7 @@ static irqreturn_t ihdlr(unsigned int j)
 
    if (linked_comm && SCpnt->device->queue_depth > 2
                                      && TLDEV(SCpnt->device->type))
-      flush_dev(SCpnt->device, SCpnt->request->sector, j, TRUE);
+      flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, TRUE);
 
    tstatus = status_byte(spp->target_status);
 
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b4b39811b44..fb867a9f55e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -137,6 +137,7 @@ struct uart_8250_port {
 	unsigned char		mcr;
 	unsigned char		mcr_mask;	/* mask of user bits */
 	unsigned char		mcr_force;	/* mask of forced bits */
+	unsigned char		cur_iotype;	/* Running I/O type */
 
 	/*
 	 * Some bits in registers are cleared on a read, so they must
@@ -286,6 +287,13 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_AR7] = {
+		.name		= "AR7",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 #if defined (CONFIG_SERIAL_8250_AU1X00)
@@ -471,6 +479,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 
 static void set_io_from_upio(struct uart_port *p)
 {
+	struct uart_8250_port *up = (struct uart_8250_port *)p;
 	switch (p->iotype) {
 	case UPIO_HUB6:
 		p->serial_in = hub6_serial_in;
@@ -509,6 +518,8 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = io_serial_out;
 		break;
 	}
+	/* Remember loaded iotype */
+	up->cur_iotype = p->iotype;
 }
 
 static void
@@ -1937,6 +1948,9 @@ static int serial8250_startup(struct uart_port *port)
 	up->capabilities = uart_config[up->port.type].flags;
 	up->mcr = 0;
 
+	if (up->port.iotype != up->cur_iotype)
+		set_io_from_upio(port);
+
 	if (up->port.type == PORT_16C950) {
 		/* Wake up and initialize UART */
 		up->acr = 0;
@@ -2563,6 +2577,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (ret < 0)
 		probeflags &= ~PROBE_RSA;
 
+	if (up->port.iotype != up->cur_iotype)
+		set_io_from_upio(port);
+
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up, probeflags);
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
@@ -2671,6 +2688,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 {
 	int i;
 
+	for (i = 0; i < nr_uarts; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+		up->cur_iotype = 0xFF;
+	}
+
 	serial8250_isa_init_ports();
 
 	for (i = 0; i < nr_uarts; i++) {
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 418b4fe9a0a..33149d982e8 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
 		 */
 		if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
 			printk(KERN_INFO
-				"Serial: device 0x%lx not configured.\n"
+				"Serial: device 0x%llx not configured.\n"
 				"Enable support for Wax, Lasi, Asp or Dino.\n",
-				dev->hpa.start);
+				(unsigned long long)dev->hpa.start);
 		return -ENODEV;
 	}
 
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 938bc1b6c3f..e371a9c1534 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2776,6 +2776,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_2_1130000 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+		PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+		pbn_b0_1_921600 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_115200 },
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 343e3a35b6a..1132c5cae7a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -833,6 +833,7 @@ config SERIAL_IMX
 	bool "IMX serial port support"
 	depends on ARM && (ARCH_IMX || ARCH_MXC)
 	select SERIAL_CORE
+	select RATIONAL
 	help
 	  If you have a machine based on a Motorola IMX CPU you
 	  can enable its onboard serial port by enabling this option.
@@ -860,7 +861,7 @@ config SERIAL_UARTLITE
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called uartlite.ko.
+	  module will be called uartlite.
 
 config SERIAL_UARTLITE_CONSOLE
 	bool "Support for console on Xilinx uartlite serial port"
@@ -1433,4 +1434,11 @@ config SPORT_BAUD_RATE
 	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
 	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
 
+config SERIAL_TIMBERDALE
+	tristate "Support for timberdale UART"
+	depends on MFD_TIMBERDALE
+	select SERIAL_CORE
+	---help---
+	Add support for UART controller on timberdale.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d438eb2a73d..45a8658f54d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e3a5ad5ef1d..58a4879c7e4 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -665,7 +665,7 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
 	void __iomem *base;
@@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, void *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 8b2b9700f3e..bf82e28770a 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
 	struct clk		*clk;
 	unsigned int		im;	/* interrupt mask */
 	unsigned int		old_status;
+	unsigned int		ifls;	/* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+	unsigned int		ifls;
+	unsigned int		fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.fifosize		= 16,
+};
+
+static struct vendor_data vendor_st = {
+	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+	.fifosize		= 64,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-	       uap->port.membase + UART011_IFLS);
+	writew(uap->ifls, uap->port.membase + UART011_IFLS);
 
 	/*
 	 * Provoke TX FIFO interrupt into asserting.
@@ -729,9 +745,10 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
+	struct vendor_data *vendor = id->data;
 	void __iomem *base;
 	int i, ret;
 
@@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, void *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, void *id)
 		goto unmap;
 	}
 
+	uap->ifls = vendor->ifls;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
 	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = dev->irq[0];
-	uap->port.fifosize = 16;
+	uap->port.fifosize = vendor->fifosize;
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
 	{
 		.id	= 0x00041011,
 		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		.id	= 0x00380802,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_st,
 	},
 	{ 0, 0 },
 };
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
 	uart_unregister_driver(&amba_reg);
 }
 
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
 module_exit(pl011_exit);
 
 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d86123e0339..e2f6b1bfac9 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -330,6 +330,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		/* Clear TFI bit */
 		UART_PUT_LSR(uart, TFI);
 #endif
+		/* Anomaly notes:
+		 *  05000215 -	we always clear ETBEI within last UART TX
+		 *		interrupt to end a string. It is always set
+		 *		when start a new tx.
+		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		return;
 	}
@@ -415,6 +420,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 	set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
 	set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
 	set_dma_x_modify(uart->tx_dma_channel, 1);
+	SSYNC();
 	enable_dma(uart->tx_dma_channel);
 
 	UART_SET_IER(uart, ETBEI);
@@ -473,27 +479,41 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
-	unsigned long flags;
-
-	spin_lock_irqsave(&uart->port.lock, flags);
 
+	dma_disable_irq(uart->rx_dma_channel);
+	spin_lock_bh(&uart->port.lock);
+
+	/* 2D DMA RX buffer ring is used. Because curr_y_count and
+	 * curr_x_count can't be read as an atomic operation,
+	 * curr_y_count should be read before curr_x_count. When
+	 * curr_x_count is read, curr_y_count may already indicate
+	 * next buffer line. But, the position calculated here is
+	 * still indicate the old line. The wrong position data may
+	 * be smaller than current buffer tail, which cause garbages
+	 * are received if it is not prohibit.
+	 */
 	uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
 	x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
 	uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
-	if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+	if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
 		uart->rx_dma_nrows = 0;
 	x_pos = DMA_RX_XCOUNT - x_pos;
 	if (x_pos == DMA_RX_XCOUNT)
 		x_pos = 0;
 
 	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
-	if (pos != uart->rx_dma_buf.tail) {
+	/* Ignore receiving data if new position is in the same line of
+	 * current buffer tail and small.
+	 */
+	if (pos > uart->rx_dma_buf.tail ||
+		uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
 		uart->rx_dma_buf.head = pos;
 		bfin_serial_dma_rx_chars(uart);
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock_irqrestore(&uart->port.lock, flags);
+	spin_unlock_bh(&uart->port.lock);
+	dma_enable_irq(uart->rx_dma_channel);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
 }
@@ -514,6 +534,11 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 	if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
 		disable_dma(uart->tx_dma_channel);
 		clear_dma_irqstat(uart->tx_dma_channel);
+		/* Anomaly notes:
+		 *  05000215 -	we always clear ETBEI within last UART TX
+		 *		interrupt to end a string. It is always set
+		 *		when start a new tx.
+		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
 		uart->port.icount.tx += uart->tx_count;
@@ -532,11 +557,26 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 	unsigned short irqstat;
+	int x_pos, pos;
 
 	spin_lock(&uart->port.lock);
 	irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
 	clear_dma_irqstat(uart->rx_dma_channel);
-	bfin_serial_dma_rx_chars(uart);
+
+	uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+	x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+	uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+	if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
+		uart->rx_dma_nrows = 0;
+
+	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT;
+	if (pos > uart->rx_dma_buf.tail ||
+		uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
+		uart->rx_dma_buf.head = pos;
+		bfin_serial_dma_rx_chars(uart);
+		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
+	}
+
 	spin_unlock(&uart->port.lock);
 
 	return IRQ_HANDLED;
@@ -789,8 +829,16 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 			__func__);
 	}
 
-	if (termios->c_cflag & CSTOPB)
-		lcr |= STB;
+	/* Anomaly notes:
+	 *  05000231 -  STOP bit is always set to 1 whatever the user is set.
+	 */
+	if (termios->c_cflag & CSTOPB) {
+		if (ANOMALY_05000231)
+			printk(KERN_WARNING "STOP bits other than 1 is not "
+				"supported in case of anomaly 05000231.\n");
+		else
+			lcr |= STB;
+	}
 	if (termios->c_cflag & PARENB)
 		lcr |= PEN;
 	if (!(termios->c_cflag & PARODD))
@@ -940,6 +988,10 @@ static void bfin_serial_reset_irda(struct uart_port *port)
 }
 
 #ifdef CONFIG_CONSOLE_POLL
+/* Anomaly notes:
+ *  05000099 -  Because we only use THRE in poll_put and DR in poll_get,
+ *		losing other bits of UART_LSR is not a problem here.
+ */
 static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -1245,12 +1297,17 @@ static __init void early_serial_write(struct console *con, const char *s,
 	}
 }
 
+/*
+ * This should have a .setup or .early_setup in it, but then things get called
+ * without the command line options, and the baud rate gets messed up - so
+ * don't let the common infrastructure play with things. (see calls to setup
+ * & earlysetup in ./kernel/printk.c:register_console()
+ */
 static struct __initdata console bfin_early_serial_console = {
 	.name = "early_BFuart",
 	.write = early_serial_write,
 	.device = uart_console_device,
 	.flags = CON_PRINTBUFFER,
-	.setup = bfin_serial_console_setup,
 	.index = -1,
 	.data  = &bfin_serial_reg,
 };
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 529c0ff7952..34b4ae0fe76 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -101,15 +101,16 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 {
 	pr_debug("%s value:%x\n", __func__, value);
 	/* Place a Start and Stop bit */
-	__asm__ volatile (
-		"R2 = b#01111111100;\n\t"
-		"R3 = b#10000000001;\n\t"
-		"%0 <<= 2;\n\t"
-		"%0 = %0 & R2;\n\t"
-		"%0 = %0 | R3;\n\t"
-		:"=r"(value)
-		:"0"(value)
-		:"R2", "R3");
+	__asm__ __volatile__ (
+		"R2 = b#01111111100;"
+		"R3 = b#10000000001;"
+		"%0 <<= 2;"
+		"%0 = %0 & R2;"
+		"%0 = %0 | R3;"
+		: "=d"(value)
+		: "d"(value)
+		: "ASTAT", "R2", "R3"
+	);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	SPORT_PUT_TX(up, value);
@@ -118,27 +119,30 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 static inline unsigned int rx_one_byte(struct sport_uart_port *up)
 {
 	unsigned int value, extract;
+	u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
 
 	value = SPORT_GET_RX32(up);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	/* Extract 8 bits data */
-	__asm__ volatile (
-		"R5 = 0;\n\t"
-		"P0 = 8;\n\t"
-		"R1 = 0x1801(Z);\n\t"
-		"R3 = 0x0300(Z);\n\t"
-		"R4 = 0;\n\t"
-		"LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
-		"R2 = extract(%1, R1.L)(Z);\n\t"
-		"R2 <<= R4;\n\t"
-		"R5 = R5 | R2;\n\t"
-		"R1 = R1 - R3;\nloop_e:\t"
-		"R4 += 1;\n\t"
-		"%0 = R5;\n\t"
-		:"=r"(extract)
-		:"r"(value)
-		:"P0", "R1", "R2","R3","R4", "R5");
+	__asm__ __volatile__ (
+		"%[extr] = 0;"
+		"%[mask1] = 0x1801(Z);"
+		"%[mask2] = 0x0300(Z);"
+		"%[shift] = 0;"
+		"LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
+		".Lloop_s:"
+		"%[tmp] = extract(%[val], %[mask1].L)(Z);"
+		"%[tmp] <<= %[shift];"
+		"%[extr] = %[extr] | %[tmp];"
+		"%[mask1] = %[mask1] - %[mask2];"
+		".Lloop_e:"
+		"%[shift] += 1;"
+		: [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp),
+		  [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2)
+		: "d"(value), [lc]"a"(8)
+		: "ASTAT", "LB0", "LC0", "LT0"
+	);
 
 	pr_debug("	extract:%x\n", extract);
 	return extract;
@@ -149,7 +153,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
 	int tclkdiv, tfsdiv, rclkdiv;
 
 	/* Set TCR1 and TCR2 */
-	SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
+	SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
 	SPORT_PUT_TCR2(up, 10);
 	pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
 
@@ -419,7 +423,7 @@ static void sport_shutdown(struct uart_port *port)
 }
 
 static void sport_set_termios(struct uart_port *port,
-		struct termios *termios, struct termios *old)
+		struct ktermios *termios, struct ktermios *old)
 {
 	pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
 	uart_update_timeout(port, CS8 ,port->uartclk);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 6579e2be1dd..9f2891c2c4a 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -137,7 +137,12 @@ static LIST_HEAD(icom_adapter_head);
 static spinlock_t icom_lock;
 
 #ifdef ICOM_TRACE
-static inline void trace(struct icom_port *, char *, unsigned long) {};
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+			unsigned long trace_data)
+{
+	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+	icom_port->port, trace_pt, trace_data);
+}
 #else
 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
 #endif
@@ -408,7 +413,7 @@ static void load_code(struct icom_port *icom_port)
 	release_firmware(fw);
 
 	/* Set Hardware level */
-	if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2)
+	if (icom_port->adapter->version == ADAPTER_V2)
 		writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
 
 	/* Start the processor in Adapter */
@@ -861,7 +866,7 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id)
 	/* find icom_port for this interrupt */
 	icom_adapter = (struct icom_adapter *) dev_id;
 
-	if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) {
+	if (icom_adapter->version == ADAPTER_V2) {
 		int_reg = icom_adapter->base_addr + 0x8024;
 
 		adapter_interrupts = readl(int_reg);
@@ -1472,8 +1477,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter)
 
 	free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
 	iounmap(icom_adapter->base_addr);
-	icom_free_adapter(icom_adapter);
 	pci_release_regions(icom_adapter->pci_dev);
+	icom_free_adapter(icom_adapter);
 }
 
 static void icom_kref_release(struct kref *kref)
@@ -1647,15 +1652,6 @@ static void __exit icom_exit(void)
 module_init(icom_init);
 module_exit(icom_exit);
 
-#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *icom_port, char *trace_pt,
-		  unsigned long trace_data)
-{
-	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
-		 icom_port->port, trace_pt, trace_data);
-}
-#endif
-
 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
 MODULE_SUPPORTED_DEVICE
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c5..285b414f305 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -8,6 +8,9 @@
  *  Author: Sascha Hauer <sascha@saschahauer.de>
  *  Copyright (C) 2004 Pengutronix
  *
+ *  Copyright (C) 2009 emlix GmbH
+ *  Author: Fabian Godehardt (added IrDA support for iMX)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -41,6 +44,8 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -66,7 +71,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +101,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -127,7 +132,7 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -148,6 +153,7 @@
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
 #define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
 #define  USR1_RTSS  	 (1<<14) /* RTS pin status */
@@ -180,13 +186,6 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR	204
-#define MINOR_START		41
-#define DEV_NAME		"ttySMX"
-#define MAX_INTERNAL_IRQ	IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
@@ -211,10 +210,20 @@ struct imx_port {
 	struct timer_list	timer;
 	unsigned int		old_status;
 	int			txirq,rxirq,rtsirq;
-	int			have_rtscts:1;
+	unsigned int		have_rtscts:1;
+	unsigned int		use_irda:1;
+	unsigned int		irda_inv_rx:1;
+	unsigned int		irda_inv_tx:1;
+	unsigned short		trcv_delay; /* transceiver delay */
 	struct clk		*clk;
 };
 
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport)	((sport)->use_irda)
+#else
+#define USE_IRDA(sport)	(0)
+#endif
+
 /*
  * Handle any change of modem status signal since we were last called.
  */
@@ -268,6 +277,48 @@ static void imx_stop_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (USE_IRDA(sport)) {
+		/* half duplex - wait for end of transmission */
+		int n = 256;
+		while ((--n > 0) &&
+		      !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+			udelay(5);
+			barrier();
+		}
+		/*
+		 * irda transceiver - wait a bit more to avoid
+		 * cutoff, hardware dependent
+		 */
+		udelay(sport->trcv_delay);
+
+		/*
+		 * half duplex - reactivate receive mode,
+		 * flush receive pipe echo crap
+		 */
+		if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+			temp = readl(sport->port.membase + UCR1);
+			temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+			writel(temp, sport->port.membase + UCR1);
+
+			temp = readl(sport->port.membase + UCR4);
+			temp &= ~(UCR4_TCEN);
+			writel(temp, sport->port.membase + UCR4);
+
+			while (readl(sport->port.membase + URXD0) &
+			       URXD_CHARRDY)
+				barrier();
+
+			temp = readl(sport->port.membase + UCR1);
+			temp |= UCR1_RRDYEN;
+			writel(temp, sport->port.membase + UCR1);
+
+			temp = readl(sport->port.membase + UCR4);
+			temp |= UCR4_DREN;
+			writel(temp, sport->port.membase + UCR4);
+		}
+		return;
+	}
+
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
 }
@@ -302,13 +353,15 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
 		/* send xmit->buf[xmit->tail]
 		 * out the port here */
 		writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
-		xmit->tail = (xmit->tail + 1) &
-		         (UART_XMIT_SIZE - 1);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		sport->port.icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
 	}
 
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
 	if (uart_circ_empty(xmit))
 		imx_stop_tx(&sport->port);
 }
@@ -321,9 +374,30 @@ static void imx_start_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (USE_IRDA(sport)) {
+		/* half duplex in IrDA mode; have to disable receive mode */
+		temp = readl(sport->port.membase + UCR4);
+		temp &= ~(UCR4_DREN);
+		writel(temp, sport->port.membase + UCR4);
+
+		temp = readl(sport->port.membase + UCR1);
+		temp &= ~(UCR1_RRDYEN);
+		writel(temp, sport->port.membase + UCR1);
+	}
+
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
 
+	if (USE_IRDA(sport)) {
+		temp = readl(sport->port.membase + UCR1);
+		temp |= UCR1_TRDYEN;
+		writel(temp, sport->port.membase + UCR1);
+
+		temp = readl(sport->port.membase + UCR4);
+		temp |= UCR4_TCEN;
+		writel(temp, sport->port.membase + UCR4);
+	}
+
 	if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
 		imx_transmit_buffer(sport);
 }
@@ -395,8 +469,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 				continue;
 		}
 
-		if (uart_handle_sysrq_char
-		            (&sport->port, (unsigned char)rx))
+		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
 			continue;
 
 		if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
@@ -471,26 +544,26 @@ static unsigned int imx_tx_empty(struct uart_port *port)
  */
 static unsigned int imx_get_mctrl(struct uart_port *port)
 {
-        struct imx_port *sport = (struct imx_port *)port;
-        unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+	struct imx_port *sport = (struct imx_port *)port;
+	unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
 
-        if (readl(sport->port.membase + USR1) & USR1_RTSS)
-                tmp |= TIOCM_CTS;
+	if (readl(sport->port.membase + USR1) & USR1_RTSS)
+		tmp |= TIOCM_CTS;
 
-        if (readl(sport->port.membase + UCR2) & UCR2_CTS)
-                tmp |= TIOCM_RTS;
+	if (readl(sport->port.membase + UCR2) & UCR2_CTS)
+		tmp |= TIOCM_RTS;
 
-        return tmp;
+	return tmp;
 }
 
 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        struct imx_port *sport = (struct imx_port *)port;
+	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
 	temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
 
-        if (mctrl & TIOCM_RTS)
+	if (mctrl & TIOCM_RTS)
 		temp |= UCR2_CTS;
 
 	writel(temp, sport->port.membase + UCR2);
@@ -534,12 +607,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	if(!ufcr_rfdiv)
 		ufcr_rfdiv = 1;
 
-	if(ufcr_rfdiv >= 7)
-		ufcr_rfdiv = 6;
-	else
-		ufcr_rfdiv = 6 - ufcr_rfdiv;
-
-	val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
 	writel(val, sport->port.membase + UFCR);
 
@@ -558,8 +626,24 @@ static int imx_startup(struct uart_port *port)
 	 * requesting IRQs
 	 */
 	temp = readl(sport->port.membase + UCR4);
+
+	if (USE_IRDA(sport))
+		temp |= UCR4_IRSC;
+
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
+	if (USE_IRDA(sport)) {
+		/* reset fifo's and state machines */
+		int i = 100;
+		temp = readl(sport->port.membase + UCR2);
+		temp &= ~UCR2_SRST;
+		writel(temp, sport->port.membase + UCR2);
+		while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+		    (--i > 0)) {
+			udelay(1);
+		}
+	}
+
 	/*
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
 	 * chips only have one interrupt.
@@ -575,12 +659,16 @@ static int imx_startup(struct uart_port *port)
 		if (retval)
 			goto error_out2;
 
-		retval = request_irq(sport->rtsirq, imx_rtsint,
-			     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
-			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-				DRIVER_NAME, sport);
-		if (retval)
-			goto error_out3;
+		/* do not use RTS IRQ on IrDA */
+		if (!USE_IRDA(sport)) {
+			retval = request_irq(sport->rtsirq, imx_rtsint,
+				     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+				       IRQF_TRIGGER_FALLING |
+				       IRQF_TRIGGER_RISING,
+					DRIVER_NAME, sport);
+			if (retval)
+				goto error_out3;
+		}
 	} else {
 		retval = request_irq(sport->port.irq, imx_int, 0,
 				DRIVER_NAME, sport);
@@ -597,18 +685,49 @@ static int imx_startup(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR1);
 	temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+	if (USE_IRDA(sport)) {
+		temp |= UCR1_IREN;
+		temp &= ~(UCR1_RTSDEN);
+	}
+
 	writel(temp, sport->port.membase + UCR1);
 
 	temp = readl(sport->port.membase + UCR2);
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+	if (USE_IRDA(sport)) {
+		/* clear RX-FIFO */
+		int i = 64;
+		while ((--i > 0) &&
+			(readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+			barrier();
+		}
+	}
+
 #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
 	temp = readl(sport->port.membase + UCR3);
 	temp |= UCR3_RXDMUXSEL;
 	writel(temp, sport->port.membase + UCR3);
 #endif
 
+	if (USE_IRDA(sport)) {
+		temp = readl(sport->port.membase + UCR4);
+		if (sport->irda_inv_rx)
+			temp |= UCR4_INVR;
+		else
+			temp &= ~(UCR4_INVR);
+		writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+		temp = readl(sport->port.membase + UCR3);
+		if (sport->irda_inv_tx)
+			temp |= UCR3_INVT;
+		else
+			temp &= ~(UCR3_INVT);
+		writel(temp, sport->port.membase + UCR3);
+	}
+
 	/*
 	 * Enable modem status interrupts
 	 */
@@ -616,6 +735,16 @@ static int imx_startup(struct uart_port *port)
 	imx_enable_ms(&sport->port);
 	spin_unlock_irqrestore(&sport->port.lock,flags);
 
+	if (USE_IRDA(sport)) {
+		struct imxuart_platform_data *pdata;
+		pdata = sport->port.dev->platform_data;
+		sport->irda_inv_rx = pdata->irda_inv_rx;
+		sport->irda_inv_tx = pdata->irda_inv_tx;
+		sport->trcv_delay = pdata->transceiver_delay;
+		if (pdata->irda_enable)
+			pdata->irda_enable(1);
+	}
+
 	return 0;
 
 error_out3:
@@ -633,6 +762,17 @@ static void imx_shutdown(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	temp = readl(sport->port.membase + UCR2);
+	temp &= ~(UCR2_TXEN);
+	writel(temp, sport->port.membase + UCR2);
+
+	if (USE_IRDA(sport)) {
+		struct imxuart_platform_data *pdata;
+		pdata = sport->port.dev->platform_data;
+		if (pdata->irda_enable)
+			pdata->irda_enable(0);
+	}
+
 	/*
 	 * Stop our timer.
 	 */
@@ -642,7 +782,8 @@ static void imx_shutdown(struct uart_port *port)
 	 * Free the interrupts
 	 */
 	if (sport->txirq > 0) {
-		free_irq(sport->rtsirq, sport);
+		if (!USE_IRDA(sport))
+			free_irq(sport->rtsirq, sport);
 		free_irq(sport->txirq, sport);
 		free_irq(sport->rxirq, sport);
 	} else
@@ -654,6 +795,9 @@ static void imx_shutdown(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR1);
 	temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+	if (USE_IRDA(sport))
+		temp &= ~(UCR1_IREN);
+
 	writel(temp, sport->port.membase + UCR1);
 }
 
@@ -665,7 +809,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-	unsigned int div, num, denom, ufcr;
+	unsigned int div, ufcr;
+	unsigned long num, denom;
+	uint64_t tdiv64;
 
 	/*
 	 * If we don't support modem control lines, don't allow
@@ -761,38 +907,39 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			sport->port.membase + UCR2);
 	old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-	div = sport->port.uartclk / (baud * 16);
-	if (div > 7)
-		div = 7;
-	if (!div)
+	if (USE_IRDA(sport)) {
+		/*
+		 * use maximum available submodule frequency to
+		 * avoid missing short pulses due to low sampling rate
+		 */
 		div = 1;
-
-	num = baud;
-	denom = port->uartclk / div / 16;
-
-	/* shift num and denom right until they fit into 16 bits */
-	while (num > 0x10000 || denom > 0x10000) {
-		num >>= 1;
-		denom >>= 1;
+	} else {
+		div = sport->port.uartclk / (baud * 16);
+		if (div > 7)
+			div = 7;
+		if (!div)
+			div = 1;
 	}
-	if (num > 0)
-		num -= 1;
-	if (denom > 0)
-		denom -= 1;
 
-	writel(num, sport->port.membase + UBIR);
-	writel(denom, sport->port.membase + UBMR);
+	rational_best_approximation(16 * div * baud, sport->port.uartclk,
+		1 << 16, 1 << 16, &num, &denom);
 
-	if (div == 7)
-		div = 6; /* 6 in RFDIV means divide by 7 */
-	else
-		div = 6 - div;
+	tdiv64 = sport->port.uartclk;
+	tdiv64 *= num;
+	do_div(tdiv64, denom * 16 * div);
+	tty_encode_baud_rate(sport->port.info->port.tty,
+		(speed_t)tdiv64, (speed_t)tdiv64);
+
+	num -= 1;
+	denom -= 1;
 
 	ufcr = readl(sport->port.membase + UFCR);
-	ufcr = (ufcr & (~UFCR_RFDIV)) |
-	    (div << 7);
+	ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
 	writel(ufcr, sport->port.membase + UFCR);
 
+	writel(num, sport->port.membase + UBIR);
+	writel(denom, sport->port.membase + UBMR);
+
 #ifdef ONEMS
 	writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
 #endif
@@ -1031,6 +1178,8 @@ imx_console_setup(struct console *co, char *options)
 	if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
 		co->index = 0;
 	sport = imx_ports[co->index];
+	if(sport == NULL)
+		return -ENODEV;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1070,22 +1219,22 @@ static struct uart_driver imx_reg = {
 
 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+	struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_suspend_port(&imx_reg, &sport->port);
+	if (sport)
+		uart_suspend_port(&imx_reg, &sport->port);
 
-        return 0;
+	return 0;
 }
 
 static int serial_imx_resume(struct platform_device *dev)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+	struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_resume_port(&imx_reg, &sport->port);
+	if (sport)
+		uart_resume_port(&imx_reg, &sport->port);
 
-        return 0;
+	return 0;
 }
 
 static int serial_imx_probe(struct platform_device *pdev)
@@ -1141,19 +1290,29 @@ static int serial_imx_probe(struct platform_device *pdev)
 	imx_ports[pdev->id] = sport;
 
 	pdata = pdev->dev.platform_data;
-	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+	if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
+#ifdef CONFIG_IRDA
+	if (pdata && (pdata->flags & IMXUART_IRDA))
+		sport->use_irda = 1;
+#endif
+
 	if (pdata->init) {
 		ret = pdata->init(pdev);
 		if (ret)
 			goto clkput;
 	}
 
-	uart_add_one_port(&imx_reg, &sport->port);
+	ret = uart_add_one_port(&imx_reg, &sport->port);
+	if (ret)
+		goto deinit;
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+deinit:
+	if (pdata->exit)
+		pdata->exit(pdev);
 clkput:
 	clk_put(sport->clk);
 	clk_disable(sport->clk);
@@ -1191,13 +1350,13 @@ static int serial_imx_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver serial_imx_driver = {
-        .probe          = serial_imx_probe,
-        .remove         = serial_imx_remove,
+	.probe		= serial_imx_probe,
+	.remove		= serial_imx_remove,
 
 	.suspend	= serial_imx_suspend,
 	.resume		= serial_imx_resume,
 	.driver		= {
-	        .name	= "imx-uart",
+		.name	= "imx-uart",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index c0a3e2734e2..4e5f3bde046 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -61,6 +61,7 @@ enum {
 	if ((DBG_##nlevel & jsm_debug))			\
 	dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
 
+#define	MAXLINES	256
 #define MAXPORTS	8
 #define MAX_STOPS_SENT	5
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 31496dc0a0d..107ce2e187b 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -33,6 +33,8 @@
 
 #include "jsm.h"
 
+static DECLARE_BITMAP(linemap, MAXLINES);
+
 static void jsm_carrier(struct jsm_channel *ch);
 
 static inline int jsm_get_mstat(struct jsm_channel *ch)
@@ -433,6 +435,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 int __devinit jsm_uart_port_init(struct jsm_board *brd)
 {
 	int i;
+	unsigned int line;
 	struct jsm_channel *ch;
 
 	if (!brd)
@@ -459,9 +462,15 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
 		brd->channels[i]->uart_port.membase = brd->re_map_membase;
 		brd->channels[i]->uart_port.fifosize = 16;
 		brd->channels[i]->uart_port.ops = &jsm_ops;
-		brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+		line = find_first_zero_bit(linemap, MAXLINES);
+		if (line >= MAXLINES) {
+			printk(KERN_INFO "jsm: linemap is full, added device failed\n");
+			continue;
+		} else
+			set_bit((int)line, linemap);
+		brd->channels[i]->uart_port.line = line;
 		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
-			printk(KERN_INFO "Added device failed\n");
+			printk(KERN_INFO "jsm: add device failed\n");
 		else
 			printk(KERN_INFO "Added device \n");
 	}
@@ -494,6 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 
 		ch = brd->channels[i];
 
+		clear_bit((int)(ch->uart_port.line), linemap);
 		uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
 	}
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7f72f8ceaa6..b3feb6198d5 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options)
 	pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
 		 co, co->index, options);
 
-	if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+	if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
 		pr_debug("PSC%x out of range\n", co->index);
 		return -EINVAL;
 	}
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 32f3eaf0d26..9e150b19d72 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 		ch = dcr_read(up->dcr_host, UART_RX);
 		if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
 			tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	} while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+	} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
 
 	tty_flip_buffer_push(tty);
 	ret = IRQ_HANDLED;
 
+	/* clear interrupt */
+	dcr_write(up->dcr_host, UART_IIR, 1);
 out:
 	spin_unlock(&up->port.lock);
 	return ret;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index dbf5357a77b..a4cf1079b31 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -47,12 +47,17 @@
 #include <linux/clk.h>
 #include <linux/ctype.h>
 #include <linux/err.h>
+#include <linux/list.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
 #endif
 
+#ifdef CONFIG_H8300
+#include <asm/gpio.h>
+#endif
+
 #include "sh-sci.h"
 
 struct sci_port {
@@ -75,14 +80,22 @@ struct sci_port {
 	int			break_flag;
 
 #ifdef CONFIG_HAVE_CLK
-	/* Port clock */
-	struct clk		*clk;
+	/* Interface clock */
+	struct clk		*iclk;
+	/* Data clock */
+	struct clk		*dclk;
 #endif
+	struct list_head	node;
 };
 
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port;
+struct sh_sci_priv {
+	spinlock_t lock;
+	struct list_head ports;
+
+#ifdef CONFIG_HAVE_CLK
+	struct notifier_block clk_nb;
 #endif
+};
 
 /* Function prototypes */
 static void sci_stop_tx(struct uart_port *port);
@@ -138,9 +151,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TDxE(port)));
 
-	sci_in(port, SCxSR);            /* Dummy read */
-	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 	sci_out(port, SCxTDR, c);
+	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 }
 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
@@ -159,12 +171,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
 		*mstpcrl &= ~mask;
 }
 
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
 {
 	h8300_sci_config(port, sci_enable);
 }
 
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
 {
 	h8300_sci_config(port, sci_disable);
 }
@@ -611,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
 	struct tty_struct *tty = port->info->port.tty;
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	if (uart_handle_break(port))
 		return 0;
@@ -726,19 +738,43 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
 			unsigned long phase, void *p)
 {
-	int i;
+	struct sh_sci_priv *priv = container_of(self,
+						struct sh_sci_priv, clk_nb);
+	struct sci_port *sci_port;
+	unsigned long flags;
 
 	if ((phase == CPUFREQ_POSTCHANGE) ||
-	    (phase == CPUFREQ_RESUMECHANGE))
-		for (i = 0; i < SCI_NPORTS; i++) {
-			struct sci_port *s = &sci_ports[i];
-			s->port.uartclk = clk_get_rate(s->clk);
-		}
+	    (phase == CPUFREQ_RESUMECHANGE)) {
+		spin_lock_irqsave(&priv->lock, flags);
+		list_for_each_entry(sci_port, &priv->ports, node)
+			sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
 
 	return NOTIFY_OK;
 }
 
-static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+static void sci_clk_enable(struct uart_port *port)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	clk_enable(sci_port->dclk);
+	sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+	if (sci_port->iclk)
+		clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	if (sci_port->iclk)
+		clk_disable(sci_port->iclk);
+
+	clk_disable(sci_port->dclk);
+}
 #endif
 
 static int sci_request_irq(struct sci_port *port)
@@ -865,15 +901,11 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
 
 static int sci_startup(struct uart_port *port)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	if (s->enable)
 		s->enable(port);
 
-#ifdef CONFIG_HAVE_CLK
-	s->clk = clk_get(NULL, "module_clk");
-#endif
-
 	sci_request_irq(s);
 	sci_start_tx(port);
 	sci_start_rx(port, 1);
@@ -883,7 +915,7 @@ static int sci_startup(struct uart_port *port)
 
 static void sci_shutdown(struct uart_port *port)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	sci_stop_rx(port);
 	sci_stop_tx(port);
@@ -891,11 +923,6 @@ static void sci_shutdown(struct uart_port *port)
 
 	if (s->disable)
 		s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
-	clk_put(s->clk);
-	s->clk = NULL;
-#endif
 }
 
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -980,25 +1007,31 @@ static int sci_request_port(struct uart_port *port)
 
 static void sci_config_port(struct uart_port *port, int flags)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	port->type = s->type;
 
-	if (port->flags & UPF_IOREMAP && !port->membase) {
-#if defined(CONFIG_SUPERH64)
-		port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
-		port->membase = (void __iomem *)port->mapbase;
-#else
+	if (port->membase)
+		return;
+
+	if (port->flags & UPF_IOREMAP) {
 		port->membase = ioremap_nocache(port->mapbase, 0x40);
-#endif
 
-		dev_err(port->dev, "can't remap port#%d\n", port->line);
+		if (IS_ERR(port->membase))
+			dev_err(port->dev, "can't remap port#%d\n", port->line);
+	} else {
+		/*
+		 * For the simple (and majority of) cases where we don't
+		 * need to do any remapping, just cast the cookie
+		 * directly.
+		 */
+		port->membase = (void __iomem *)port->mapbase;
 	}
 }
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
 		return -EINVAL;
@@ -1032,63 +1065,60 @@ static struct uart_ops sci_uart_ops = {
 #endif
 };
 
-static void __init sci_init_ports(void)
+static void __devinit sci_init_single(struct platform_device *dev,
+				      struct sci_port *sci_port,
+				      unsigned int index,
+				      struct plat_sci_port *p)
 {
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-
-	first = 0;
-
-	for (i = 0; i < SCI_NPORTS; i++) {
-		sci_ports[i].port.ops		= &sci_uart_ops;
-		sci_ports[i].port.iotype	= UPIO_MEM;
-		sci_ports[i].port.line		= i;
-		sci_ports[i].port.fifosize	= 1;
+	sci_port->port.ops	= &sci_uart_ops;
+	sci_port->port.iotype	= UPIO_MEM;
+	sci_port->port.line	= index;
+	sci_port->port.fifosize	= 1;
 
 #if defined(__H8300H__) || defined(__H8300S__)
 #ifdef __H8300S__
-		sci_ports[i].enable	= h8300_sci_enable;
-		sci_ports[i].disable	= h8300_sci_disable;
+	sci_port->enable	= h8300_sci_enable;
+	sci_port->disable	= h8300_sci_disable;
 #endif
-		sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
+	sci_port->port.uartclk	= CONFIG_CPU_CLOCK;
 #elif defined(CONFIG_HAVE_CLK)
-		/*
-		 * XXX: We should use a proper SCI/SCIF clock
-		 */
-		{
-			struct clk *clk = clk_get(NULL, "module_clk");
-			sci_ports[i].port.uartclk = clk_get_rate(clk);
-			clk_put(clk);
-		}
+	sci_port->iclk		= p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+	sci_port->dclk		= clk_get(&dev->dev, "peripheral_clk");
+	sci_port->enable	= sci_clk_enable;
+	sci_port->disable	= sci_clk_disable;
 #else
 #error "Need a valid uartclk"
 #endif
 
-		sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
-		sci_ports[i].break_timer.function = sci_break_timer;
+	sci_port->break_timer.data = (unsigned long)sci_port;
+	sci_port->break_timer.function = sci_break_timer;
+	init_timer(&sci_port->break_timer);
 
-		init_timer(&sci_ports[i].break_timer);
-	}
-}
-
-int __init early_sci_setup(struct uart_port *port)
-{
-	if (unlikely(port->line > SCI_NPORTS))
-		return -ENODEV;
+	sci_port->port.mapbase	= p->mapbase;
+	sci_port->port.membase	= p->membase;
 
-	sci_init_ports();
+	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
+	sci_port->port.flags	= p->flags;
+	sci_port->port.dev	= &dev->dev;
+	sci_port->type		= sci_port->port.type = p->type;
 
-	sci_ports[port->line].port.membase	= port->membase;
-	sci_ports[port->line].port.mapbase	= port->mapbase;
-	sci_ports[port->line].port.type		= port->type;
+	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
 
-	return 0;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct tty_driver *serial_console_device(struct console *co, int *index)
+{
+	struct uart_driver *p = &sci_uart_driver;
+	*index = co->index;
+	return p->tty_driver;
+}
+
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+	sci_poll_put_char(port, ch);
+}
+
 /*
  *	Print a string to the serial port trying not to disturb
  *	any possible real use of the port...
@@ -1096,25 +1126,27 @@ int __init early_sci_setup(struct uart_port *port)
 static void serial_console_write(struct console *co, const char *s,
 				 unsigned count)
 {
-	struct uart_port *port = &serial_console_port->port;
+	struct uart_port *port = co->data;
+	struct sci_port *sci_port = to_sci_port(port);
 	unsigned short bits;
-	int i;
 
-	for (i = 0; i < count; i++) {
-		if (*s == 10)
-			sci_poll_put_char(port, '\r');
+	if (sci_port->enable)
+		sci_port->enable(port);
 
-		sci_poll_put_char(port, *s++);
-	}
+	uart_console_write(port, s, count, serial_console_putchar);
 
 	/* wait until fifo is empty and last bit has been transmitted */
 	bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
 	while ((sci_in(port, SCxSR) & bits) != bits)
 		cpu_relax();
+
+	if (sci_port->disable);
+		sci_port->disable(port);
 }
 
 static int __init serial_console_setup(struct console *co, char *options)
 {
+	struct sci_port *sci_port;
 	struct uart_port *port;
 	int baud = 115200;
 	int bits = 8;
@@ -1130,8 +1162,9 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (co->index >= SCI_NPORTS)
 		co->index = 0;
 
-	serial_console_port = &sci_ports[co->index];
-	port = &serial_console_port->port;
+	sci_port = &sci_ports[co->index];
+	port = &sci_port->port;
+	co->data = port;
 
 	/*
 	 * Also need to check port->type, we don't actually have any
@@ -1141,21 +1174,11 @@ static int __init serial_console_setup(struct console *co, char *options)
 	 */
 	if (!port->type)
 		return -ENODEV;
-	if (!port->membase || !port->mapbase)
-		return -ENODEV;
-
-	port->type = serial_console_port->type;
-
-#ifdef CONFIG_HAVE_CLK
-	if (!serial_console_port->clk)
-		serial_console_port->clk = clk_get(NULL, "module_clk");
-#endif
 
-	if (port->flags & UPF_IOREMAP)
-		sci_config_port(port, 0);
+	sci_config_port(port, 0);
 
-	if (serial_console_port->enable)
-		serial_console_port->enable(port);
+	if (sci_port->enable)
+		sci_port->enable(port);
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1166,22 +1189,21 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (ret == 0)
 		sci_stop_rx(port);
 #endif
+	/* TODO: disable clock */
 	return ret;
 }
 
 static struct console serial_console = {
 	.name		= "ttySC",
-	.device		= uart_console_device,
+	.device		= serial_console_device,
 	.write		= serial_console_write,
 	.setup		= serial_console_setup,
 	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
-	.data		= &sci_uart_driver,
 };
 
 static int __init sci_console_init(void)
 {
-	sci_init_ports();
 	register_console(&serial_console);
 	return 0;
 }
@@ -1207,6 +1229,61 @@ static struct uart_driver sci_uart_driver = {
 	.cons		= SCI_CONSOLE,
 };
 
+
+static int sci_remove(struct platform_device *dev)
+{
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sci_port *p;
+	unsigned long flags;
+
+#ifdef CONFIG_HAVE_CLK
+	cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(p, &priv->ports, node)
+		uart_remove_one_port(&sci_uart_driver, &p->port);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	kfree(priv);
+	return 0;
+}
+
+static int __devinit sci_probe_single(struct platform_device *dev,
+				      unsigned int index,
+				      struct plat_sci_port *p,
+				      struct sci_port *sciport)
+{
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	unsigned long flags;
+	int ret;
+
+	/* Sanity check */
+	if (unlikely(index >= SCI_NPORTS)) {
+		dev_notice(&dev->dev, "Attempting to register port "
+			   "%d when only %d are available.\n",
+			   index+1, SCI_NPORTS);
+		dev_notice(&dev->dev, "Consider bumping "
+			   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+		return 0;
+	}
+
+	sci_init_single(dev, sciport, index, p);
+
+	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+	if (ret)
+		return ret;
+
+	INIT_LIST_HEAD(&sciport->node);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	list_add(&sciport->node, &priv->ports);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
 /*
  * Register a set of serial devices attached to a platform device.  The
  * list is terminated with a zero flags entry, which means we expect
@@ -1216,57 +1293,34 @@ static struct uart_driver sci_uart_driver = {
 static int __devinit sci_probe(struct platform_device *dev)
 {
 	struct plat_sci_port *p = dev->dev.platform_data;
+	struct sh_sci_priv *priv;
 	int i, ret = -EINVAL;
 
-	for (i = 0; p && p->flags != 0; p++, i++) {
-		struct sci_port *sciport = &sci_ports[i];
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-		/* Sanity check */
-		if (unlikely(i == SCI_NPORTS)) {
-			dev_notice(&dev->dev, "Attempting to register port "
-				   "%d when only %d are available.\n",
-				   i+1, SCI_NPORTS);
-			dev_notice(&dev->dev, "Consider bumping "
-				   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
-			break;
-		}
+	INIT_LIST_HEAD(&priv->ports);
+	spin_lock_init(&priv->lock);
+	platform_set_drvdata(dev, priv);
 
-		sciport->port.mapbase	= p->mapbase;
+#ifdef CONFIG_HAVE_CLK
+	priv->clk_nb.notifier_call = sci_notifier;
+	cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
 
-		if (p->mapbase && !p->membase) {
-			if (p->flags & UPF_IOREMAP) {
-				p->membase = ioremap_nocache(p->mapbase, 0x40);
-				if (IS_ERR(p->membase)) {
-					ret = PTR_ERR(p->membase);
-					goto err_unreg;
-				}
-			} else {
-				/*
-				 * For the simple (and majority of) cases
-				 * where we don't need to do any remapping,
-				 * just cast the cookie directly.
-				 */
-				p->membase = (void __iomem *)p->mapbase;
-			}
+	if (dev->id != -1) {
+		ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
+		if (ret)
+			goto err_unreg;
+	} else {
+		for (i = 0; p && p->flags != 0; p++, i++) {
+			ret = sci_probe_single(dev, i, p, &sci_ports[i]);
+			if (ret)
+				goto err_unreg;
 		}
-
-		sciport->port.membase	= p->membase;
-
-		sciport->port.irq	= p->irqs[SCIx_TXI_IRQ];
-		sciport->port.flags	= p->flags;
-		sciport->port.dev	= &dev->dev;
-
-		sciport->type		= sciport->port.type = p->type;
-
-		memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
-
-		uart_add_one_port(&sci_uart_driver, &sciport->port);
 	}
 
-#ifdef CONFIG_HAVE_CLK
-	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 	sh_bios_gdb_detach();
 #endif
@@ -1274,50 +1328,36 @@ static int __devinit sci_probe(struct platform_device *dev)
 	return 0;
 
 err_unreg:
-	for (i = i - 1; i >= 0; i--)
-		uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
+	sci_remove(dev);
 	return ret;
 }
 
-static int __devexit sci_remove(struct platform_device *dev)
-{
-	int i;
-
-#ifdef CONFIG_HAVE_CLK
-	cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
-	for (i = 0; i < SCI_NPORTS; i++)
-		uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
-	return 0;
-}
-
 static int sci_suspend(struct platform_device *dev, pm_message_t state)
 {
-	int i;
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sci_port *p;
+	unsigned long flags;
 
-	for (i = 0; i < SCI_NPORTS; i++) {
-		struct sci_port *p = &sci_ports[i];
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(p, &priv->ports, node)
+		uart_suspend_port(&sci_uart_driver, &p->port);
 
-		if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
-			uart_suspend_port(&sci_uart_driver, &p->port);
-	}
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
 
 static int sci_resume(struct platform_device *dev)
 {
-	int i;
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sci_port *p;
+	unsigned long flags;
 
-	for (i = 0; i < SCI_NPORTS; i++) {
-		struct sci_port *p = &sci_ports[i];
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(p, &priv->ports, node)
+		uart_resume_port(&sci_uart_driver, &p->port);
 
-		if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
-			uart_resume_port(&sci_uart_driver, &p->port);
-	}
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -1339,8 +1379,6 @@ static int __init sci_init(void)
 
 	printk(banner);
 
-	sci_init_ports();
-
 	ret = uart_register_driver(&sci_uart_driver);
 	if (likely(ret == 0)) {
 		ret = platform_driver_register(&sci_driver);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d0aa82d7fce..38072c15b84 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -91,6 +91,9 @@
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCIF_ORER              0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -314,7 +317,18 @@
     }									\
   }
 
-#define CPU_SCIF_FNS(name, scif_offset, scif_size)				\
+#ifdef CONFIG_H8300
+/* h8300 don't have SCIF */
+#define CPU_SCIF_FNS(name)						\
+  static inline unsigned int sci_##name##_in(struct uart_port *port)	\
+  {									\
+    return 0;								\
+  }									\
+  static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+  {									\
+  }
+#else
+#define CPU_SCIF_FNS(name, scif_offset, scif_size)			\
   static inline unsigned int sci_##name##_in(struct uart_port *port)	\
   {									\
     SCI_IN(scif_size, scif_offset);					\
@@ -323,6 +337,7 @@
   {									\
     SCI_OUT(scif_size, scif_offset, value);				\
   }
+#endif
 
 #define CPU_SCI_FNS(name, sci_offset, sci_size)				\
   static inline unsigned int sci_##name##_in(struct uart_port* port)	\
@@ -360,8 +375,10 @@
 		 sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
                  h8_sci_offset, h8_sci_size) \
   CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
-#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+  CPU_SCIF_FNS(name)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
         #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
                 CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
         #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
@@ -390,7 +407,8 @@ SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
 SCIF_FNS(SCLSR,  0x24, 16)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
 SCIx_FNS(SCBRR,  0x04,  8, 0x04,  8)
 SCIx_FNS(SCSCR,  0x08, 16, 0x08, 16)
@@ -604,10 +622,21 @@ static inline int sci_rxd_in(struct uart_port *port)
                 return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
         return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#  define SCFSR    0x0010
+#  define SCASSR   0x0014
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->type == PORT_SCIF)
+		return ctrl_inw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
+	if (port->type == PORT_SCIFA)
+		return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-         return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+         return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
 }
 #elif defined(__H8300H__) || defined(__H8300S__)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -757,7 +786,8 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
 {
 	if (port->type == PORT_SCIF)
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
new file mode 100644
index 00000000000..ac9e5d5f742
--- /dev/null
+++ b/drivers/serial/timbuart.c
@@ -0,0 +1,526 @@
+/*
+ * timbuart.c timberdale FPGA UART driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+
+#include "timbuart.h"
+
+struct timbuart_port {
+	struct uart_port	port;
+	struct tasklet_struct	tasklet;
+	int			usedma;
+	u8			last_ier;
+	struct platform_device  *dev;
+};
+
+static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
+	921600, 1843200, 3250000};
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
+
+static void timbuart_stop_rx(struct uart_port *port)
+{
+	/* spin lock held by upper layer, disable all RX interrupts */
+	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
+	iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_stop_tx(struct uart_port *port)
+{
+	/* spinlock held by upper layer, disable TX interrupt */
+	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
+	iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_start_tx(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+
+	/* do not transfer anything here -> fire off the tasklet */
+	tasklet_schedule(&uart->tasklet);
+}
+
+static void timbuart_flush_buffer(struct uart_port *port)
+{
+	u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+
+	iowrite8(ctl, port->membase + TIMBUART_CTRL);
+	iowrite8(TXBF, port->membase + TIMBUART_ISR);
+}
+
+static void timbuart_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+
+	while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+		port->icount.rx++;
+		tty_insert_flip_char(tty, ch, TTY_NORMAL);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(port->info->port.tty);
+	spin_lock(&port->lock);
+
+	dev_dbg(port->dev, "%s - total read %d bytes\n",
+		__func__, port->icount.rx);
+}
+
+static void timbuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+
+	while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+		!uart_circ_empty(xmit)) {
+		iowrite8(xmit->buf[xmit->tail],
+			port->membase + TIMBUART_TXFIFO);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	dev_dbg(port->dev,
+		"%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
+		 __func__,
+		port->icount.tx,
+		ioread8(port->membase + TIMBUART_CTRL),
+		port->mctrl & TIOCM_RTS,
+		ioread8(port->membase + TIMBUART_BAUDRATE));
+}
+
+static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+	struct circ_buf *xmit = &port->info->xmit;
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+		return;
+
+	if (port->x_char)
+		return;
+
+	if (isr & TXFLAGS) {
+		timbuart_tx_chars(port);
+		/* clear all TX interrupts */
+		iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+
+		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+			uart_write_wakeup(port);
+	} else
+		/* Re-enable any tx interrupt */
+		*ier |= uart->last_ier & TXFLAGS;
+
+	/* enable interrupts if there are chars in the transmit buffer,
+	 * Or if we delivered some bytes and want the almost empty interrupt
+	 * we wake up the upper layer later when we got the interrupt
+	 * to give it some time to go out...
+	 */
+	if (!uart_circ_empty(xmit))
+		*ier |= TXBAE;
+
+	dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+	if (isr & RXFLAGS) {
+		/* Some RX status is set */
+		if (isr & RXBF) {
+			u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+				TIMBUART_CTRL_FLSHRX;
+			iowrite8(ctl, port->membase + TIMBUART_CTRL);
+			port->icount.overrun++;
+		} else if (isr & (RXDP))
+			timbuart_rx_chars(port);
+
+		/* ack all RX interrupts */
+		iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+	}
+
+	/* always have the RX interrupts enabled */
+	*ier |= RXBAF | RXBF | RXTT;
+
+	dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_tasklet(unsigned long arg)
+{
+	struct timbuart_port *uart = (struct timbuart_port *)arg;
+	u8 isr, ier = 0;
+
+	spin_lock(&uart->port.lock);
+
+	isr = ioread8(uart->port.membase + TIMBUART_ISR);
+	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
+
+	if (!uart->usedma)
+		timbuart_handle_tx_port(&uart->port, isr, &ier);
+
+	timbuart_mctrl_check(&uart->port, isr, &ier);
+
+	if (!uart->usedma)
+		timbuart_handle_rx_port(&uart->port, isr, &ier);
+
+	iowrite8(ier, uart->port.membase + TIMBUART_IER);
+
+	spin_unlock(&uart->port.lock);
+	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
+}
+
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+	u8 isr = ioread8(port->membase + TIMBUART_ISR);
+
+	return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int timbuart_get_mctrl(struct uart_port *port)
+{
+	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
+
+	if (cts & TIMBUART_CTRL_CTS)
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	else
+		return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
+
+	if (mctrl & TIOCM_RTS)
+		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+	else
+		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+}
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+{
+	unsigned int cts;
+
+	if (isr & CTS_DELTA) {
+		/* ack */
+		iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+		cts = timbuart_get_mctrl(port);
+		uart_handle_cts_change(port, cts & TIOCM_CTS);
+		wake_up_interruptible(&port->info->delta_msr_wait);
+	}
+
+	*ier |= CTS_DELTA;
+}
+
+static void timbuart_enable_ms(struct uart_port *port)
+{
+	/* N/A */
+}
+
+static void timbuart_break_ctl(struct uart_port *port, int ctl)
+{
+	/* N/A */
+}
+
+static int timbuart_startup(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+
+	dev_dbg(port->dev, "%s\n", __func__);
+
+	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
+	iowrite8(0xff, port->membase + TIMBUART_ISR);
+	/* Enable all but TX interrupts */
+	iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+		port->membase + TIMBUART_IER);
+
+	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
+		"timb-uart", uart);
+}
+
+static void timbuart_shutdown(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+	dev_dbg(port->dev, "%s\n", __func__);
+	free_irq(port->irq, uart);
+	iowrite8(0, port->membase + TIMBUART_IER);
+}
+
+static int get_bindex(int baud)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(baudrates); i++)
+		if (baud <= baudrates[i])
+			return i;
+
+	return -1;
+}
+
+static void timbuart_set_termios(struct uart_port *port,
+	struct ktermios *termios,
+	struct ktermios *old)
+{
+	unsigned int baud;
+	short bindex;
+	unsigned long flags;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	bindex = get_bindex(baud);
+	dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
+
+	if (bindex < 0)
+		bindex = 0;
+	baud = baudrates[bindex];
+
+	/* The serial layer calls into this once with old = NULL when setting
+	   up initially */
+	if (old)
+		tty_termios_copy_hw(termios, old);
+	tty_termios_encode_baud_rate(termios, baud, baud);
+
+	spin_lock_irqsave(&port->lock, flags);
+	iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
+	uart_update_timeout(port, termios->c_cflag, baud);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *timbuart_type(struct uart_port *port)
+{
+	return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
+}
+
+/* We do not request/release mappings of the registers here,
+ * currently it's done in the proble function.
+ */
+static void timbuart_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	int size =
+		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+	if (port->flags & UPF_IOREMAP) {
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+
+	release_mem_region(port->mapbase, size);
+}
+
+static int timbuart_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	int size =
+		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+	if (!request_mem_region(port->mapbase, size, "timb-uart"))
+		return -EBUSY;
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = ioremap(port->mapbase, size);
+		if (port->membase == NULL) {
+			release_mem_region(port->mapbase, size);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
+{
+	struct timbuart_port *uart = (struct timbuart_port *)devid;
+
+	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
+		uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+
+		/* disable interrupts, the tasklet enables them again */
+		iowrite8(0, uart->port.membase + TIMBUART_IER);
+
+		/* fire off bottom half */
+		tasklet_schedule(&uart->tasklet);
+
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void timbuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_TIMBUART;
+		timbuart_request_port(port);
+	}
+}
+
+static int timbuart_verify_port(struct uart_port *port,
+	struct serial_struct *ser)
+{
+	/* we don't want the core code to modify any port params */
+	return -EINVAL;
+}
+
+static struct uart_ops timbuart_ops = {
+	.tx_empty = timbuart_tx_empty,
+	.set_mctrl = timbuart_set_mctrl,
+	.get_mctrl = timbuart_get_mctrl,
+	.stop_tx = timbuart_stop_tx,
+	.start_tx = timbuart_start_tx,
+	.flush_buffer = timbuart_flush_buffer,
+	.stop_rx = timbuart_stop_rx,
+	.enable_ms = timbuart_enable_ms,
+	.break_ctl = timbuart_break_ctl,
+	.startup = timbuart_startup,
+	.shutdown = timbuart_shutdown,
+	.set_termios = timbuart_set_termios,
+	.type = timbuart_type,
+	.release_port = timbuart_release_port,
+	.request_port = timbuart_request_port,
+	.config_port = timbuart_config_port,
+	.verify_port = timbuart_verify_port
+};
+
+static struct uart_driver timbuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "timberdale_uart",
+	.dev_name = "ttyTU",
+	.major = TIMBUART_MAJOR,
+	.minor = TIMBUART_MINOR,
+	.nr = 1
+};
+
+static int timbuart_probe(struct platform_device *dev)
+{
+	int err;
+	struct timbuart_port *uart;
+	struct resource *iomem;
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	uart = kzalloc(sizeof(*uart), GFP_KERNEL);
+	if (!uart) {
+		err = -EINVAL;
+		goto err_mem;
+	}
+
+	uart->usedma = 0;
+
+	uart->port.uartclk = 3250000 * 16;
+	uart->port.fifosize  = TIMBUART_FIFO_SIZE;
+	uart->port.regshift  = 2;
+	uart->port.iotype  = UPIO_MEM;
+	uart->port.ops = &timbuart_ops;
+	uart->port.irq = 0;
+	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	uart->port.line  = 0;
+	uart->port.dev	= &dev->dev;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		err = -ENOMEM;
+		goto err_register;
+	}
+	uart->port.mapbase = iomem->start;
+	uart->port.membase = NULL;
+
+	uart->port.irq = platform_get_irq(dev, 0);
+	if (uart->port.irq < 0) {
+		err = -EINVAL;
+		goto err_register;
+	}
+
+	tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
+
+	err = uart_register_driver(&timbuart_driver);
+	if (err)
+		goto err_register;
+
+	err = uart_add_one_port(&timbuart_driver, &uart->port);
+	if (err)
+		goto err_add_port;
+
+	platform_set_drvdata(dev, uart);
+
+	return 0;
+
+err_add_port:
+	uart_unregister_driver(&timbuart_driver);
+err_register:
+	kfree(uart);
+err_mem:
+	printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
+		err);
+
+	return err;
+}
+
+static int timbuart_remove(struct platform_device *dev)
+{
+	struct timbuart_port *uart = platform_get_drvdata(dev);
+
+	tasklet_kill(&uart->tasklet);
+	uart_remove_one_port(&timbuart_driver, &uart->port);
+	uart_unregister_driver(&timbuart_driver);
+	kfree(uart);
+
+	return 0;
+}
+
+static struct platform_driver timbuart_platform_driver = {
+	.driver = {
+		.name	= "timb-uart",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= timbuart_probe,
+	.remove		= timbuart_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbuart_init(void)
+{
+	return platform_driver_register(&timbuart_platform_driver);
+}
+
+static void __exit timbuart_exit(void)
+{
+	platform_driver_unregister(&timbuart_platform_driver);
+}
+
+module_init(timbuart_init);
+module_exit(timbuart_exit);
+
+MODULE_DESCRIPTION("Timberdale UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:timb-uart");
+
diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h
new file mode 100644
index 00000000000..7e566766bc4
--- /dev/null
+++ b/drivers/serial/timbuart.h
@@ -0,0 +1,58 @@
+/*
+ * timbuart.c timberdale FPGA GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#ifndef _TIMBUART_H
+#define _TIMBUART_H
+
+#define TIMBUART_FIFO_SIZE	2048
+
+#define TIMBUART_RXFIFO		0x08
+#define TIMBUART_TXFIFO		0x0c
+#define TIMBUART_IER		0x10
+#define TIMBUART_IPR		0x14
+#define TIMBUART_ISR		0x18
+#define TIMBUART_CTRL		0x1c
+#define TIMBUART_BAUDRATE	0x20
+
+#define TIMBUART_CTRL_RTS	0x01
+#define TIMBUART_CTRL_CTS	0x02
+#define TIMBUART_CTRL_FLSHTX	0x40
+#define TIMBUART_CTRL_FLSHRX	0x80
+
+#define TXBF		0x01
+#define TXBAE		0x02
+#define CTS_DELTA	0x04
+#define RXDP		0x08
+#define RXBAF		0x10
+#define RXBF		0x20
+#define RXTT		0x40
+#define RXBNAE		0x80
+#define TXBE		0x100
+
+#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE)
+#define TXFLAGS (TXBF | TXBAE)
+
+#define TIMBUART_MAJOR 204
+#define TIMBUART_MINOR 192
+
+#endif /* _TIMBUART_H */
+
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 12d13d99b6f..d687a9b93d0 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -24,6 +24,7 @@
 #include <linux/sh_intc.h>
 #include <linux/sysdev.h>
 #include <linux/list.h>
+#include <linux/topology.h>
 
 #define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
 	((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
@@ -770,11 +771,19 @@ void __init register_intc_controller(struct intc_desc *desc)
 	/* register the vectors one by one */
 	for (i = 0; i < desc->nr_vectors; i++) {
 		struct intc_vect *vect = desc->vectors + i;
+		unsigned int irq = evt2irq(vect->vect);
+		struct irq_desc *irq_desc;
 
 		if (!vect->enum_id)
 			continue;
 
-		intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect));
+		irq_desc = irq_to_desc_alloc_node(irq, numa_node_id());
+		if (unlikely(!irq_desc)) {
+			printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+			continue;
+		}
+
+		intc_register_irq(desc, d, vect->enum_id, irq);
 	}
 }
 
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d5296..e8aae227b5e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
 
 config SPI_IMX
 	tristate "Freescale iMX SPI controller"
-	depends on ARCH_IMX && EXPERIMENTAL
+	depends on ARCH_MX1 && EXPERIMENTAL
 	help
 	  This enables using the Freescale iMX SPI controller in master
 	  mode.
@@ -171,6 +171,15 @@ config SPI_ORION
 	help
 	  This enables using the SPI master controller on the Orion chips.
 
+config SPI_PL022
+	tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
+	depends on ARM_AMBA && EXPERIMENTAL
+	default y if MACH_U300
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+	  controller. If you have an embedded system with an AMBA(R)
+	  bus and a PL022 controller, say Y or M here.
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on ARCH_PXA && EXPERIMENTAL
@@ -212,7 +221,7 @@ config SPI_TXX9
 
 config SPI_XILINX
 	tristate "Xilinx SPI controller"
-	depends on XILINX_VIRTEX && EXPERIMENTAL
+	depends on (XILINX_VIRTEX || MICROBLAZE) && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  This exposes the SPI controller IP from the Xilinx EDK.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d0451936d8..ecfadb18048 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
+obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
new file mode 100644
index 00000000000..da76797ce8b
--- /dev/null
+++ b/drivers/spi/amba-pl022.c
@@ -0,0 +1,1866 @@
+/*
+ * drivers/spi/amba-pl022.c
+ *
+ * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * TODO:
+ * - add timeout on polled transfers
+ * - add generic DMA framework support
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+/*
+ * This macro is used to define some register default values.
+ * reg is masked with mask, the OR:ed with an (again masked)
+ * val shifted sb steps to the left.
+ */
+#define SSP_WRITE_BITS(reg, val, mask, sb) \
+ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
+
+/*
+ * This macro is also used to define some default values.
+ * It will just shift val by sb steps to the left and mask
+ * the result with mask.
+ */
+#define GEN_MASK_BITS(val, mask, sb) \
+ (((val)<<(sb)) & (mask))
+
+#define DRIVE_TX		0
+#define DO_NOT_DRIVE_TX		1
+
+#define DO_NOT_QUEUE_DMA	0
+#define QUEUE_DMA		1
+
+#define RX_TRANSFER		1
+#define TX_TRANSFER		2
+
+/*
+ * Macros to access SSP Registers with their offsets
+ */
+#define SSP_CR0(r)	(r + 0x000)
+#define SSP_CR1(r)	(r + 0x004)
+#define SSP_DR(r)	(r + 0x008)
+#define SSP_SR(r)	(r + 0x00C)
+#define SSP_CPSR(r)	(r + 0x010)
+#define SSP_IMSC(r)	(r + 0x014)
+#define SSP_RIS(r)	(r + 0x018)
+#define SSP_MIS(r)	(r + 0x01C)
+#define SSP_ICR(r)	(r + 0x020)
+#define SSP_DMACR(r)	(r + 0x024)
+#define SSP_ITCR(r)	(r + 0x080)
+#define SSP_ITIP(r)	(r + 0x084)
+#define SSP_ITOP(r)	(r + 0x088)
+#define SSP_TDR(r)	(r + 0x08C)
+
+#define SSP_PID0(r)	(r + 0xFE0)
+#define SSP_PID1(r)	(r + 0xFE4)
+#define SSP_PID2(r)	(r + 0xFE8)
+#define SSP_PID3(r)	(r + 0xFEC)
+
+#define SSP_CID0(r)	(r + 0xFF0)
+#define SSP_CID1(r)	(r + 0xFF4)
+#define SSP_CID2(r)	(r + 0xFF8)
+#define SSP_CID3(r)	(r + 0xFFC)
+
+/*
+ * SSP Control Register 0  - SSP_CR0
+ */
+#define SSP_CR0_MASK_DSS	(0x1FUL << 0)
+#define SSP_CR0_MASK_HALFDUP	(0x1UL << 5)
+#define SSP_CR0_MASK_SPO	(0x1UL << 6)
+#define SSP_CR0_MASK_SPH	(0x1UL << 7)
+#define SSP_CR0_MASK_SCR	(0xFFUL << 8)
+#define SSP_CR0_MASK_CSS	(0x1FUL << 16)
+#define SSP_CR0_MASK_FRF	(0x3UL << 21)
+
+/*
+ * SSP Control Register 0  - SSP_CR1
+ */
+#define SSP_CR1_MASK_LBM	(0x1UL << 0)
+#define SSP_CR1_MASK_SSE	(0x1UL << 1)
+#define SSP_CR1_MASK_MS		(0x1UL << 2)
+#define SSP_CR1_MASK_SOD	(0x1UL << 3)
+#define SSP_CR1_MASK_RENDN	(0x1UL << 4)
+#define SSP_CR1_MASK_TENDN	(0x1UL << 5)
+#define SSP_CR1_MASK_MWAIT	(0x1UL << 6)
+#define SSP_CR1_MASK_RXIFLSEL	(0x7UL << 7)
+#define SSP_CR1_MASK_TXIFLSEL	(0x7UL << 10)
+
+/*
+ * SSP Data Register - SSP_DR
+ */
+#define SSP_DR_MASK_DATA	0xFFFFFFFF
+
+/*
+ * SSP Status Register - SSP_SR
+ */
+#define SSP_SR_MASK_TFE		(0x1UL << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF		(0x1UL << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE		(0x1UL << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF 	(0x1UL << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY		(0x1UL << 4) /* Busy Flag */
+
+/*
+ * SSP Clock Prescale Register  - SSP_CPSR
+ */
+#define SSP_CPSR_MASK_CPSDVSR	(0xFFUL << 0)
+
+/*
+ * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
+ */
+#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
+#define SSP_IMSC_MASK_RTIM  (0x1UL << 1) /* Receive timeout Interrupt mask */
+#define SSP_IMSC_MASK_RXIM  (0x1UL << 2) /* Receive FIFO Interrupt mask */
+#define SSP_IMSC_MASK_TXIM  (0x1UL << 3) /* Transmit FIFO Interrupt mask */
+
+/*
+ * SSP Raw Interrupt Status Register - SSP_RIS
+ */
+/* Receive Overrun Raw Interrupt status */
+#define SSP_RIS_MASK_RORRIS		(0x1UL << 0)
+/* Receive Timeout Raw Interrupt status */
+#define SSP_RIS_MASK_RTRIS		(0x1UL << 1)
+/* Receive FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_RXRIS		(0x1UL << 2)
+/* Transmit FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_TXRIS		(0x1UL << 3)
+
+/*
+ * SSP Masked Interrupt Status Register - SSP_MIS
+ */
+/* Receive Overrun Masked Interrupt status */
+#define SSP_MIS_MASK_RORMIS		(0x1UL << 0)
+/* Receive Timeout Masked Interrupt status */
+#define SSP_MIS_MASK_RTMIS		(0x1UL << 1)
+/* Receive FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_RXMIS		(0x1UL << 2)
+/* Transmit FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_TXMIS		(0x1UL << 3)
+
+/*
+ * SSP Interrupt Clear Register - SSP_ICR
+ */
+/* Receive Overrun Raw Clear Interrupt bit */
+#define SSP_ICR_MASK_RORIC		(0x1UL << 0)
+/* Receive Timeout Clear Interrupt bit */
+#define SSP_ICR_MASK_RTIC		(0x1UL << 1)
+
+/*
+ * SSP DMA Control Register - SSP_DMACR
+ */
+/* Receive DMA Enable bit */
+#define SSP_DMACR_MASK_RXDMAE		(0x1UL << 0)
+/* Transmit DMA Enable bit */
+#define SSP_DMACR_MASK_TXDMAE		(0x1UL << 1)
+
+/*
+ * SSP Integration Test control Register - SSP_ITCR
+ */
+#define SSP_ITCR_MASK_ITEN		(0x1UL << 0)
+#define SSP_ITCR_MASK_TESTFIFO		(0x1UL << 1)
+
+/*
+ * SSP Integration Test Input Register - SSP_ITIP
+ */
+#define ITIP_MASK_SSPRXD		 (0x1UL << 0)
+#define ITIP_MASK_SSPFSSIN		 (0x1UL << 1)
+#define ITIP_MASK_SSPCLKIN		 (0x1UL << 2)
+#define ITIP_MASK_RXDMAC		 (0x1UL << 3)
+#define ITIP_MASK_TXDMAC		 (0x1UL << 4)
+#define ITIP_MASK_SSPTXDIN		 (0x1UL << 5)
+
+/*
+ * SSP Integration Test output Register - SSP_ITOP
+ */
+#define ITOP_MASK_SSPTXD		 (0x1UL << 0)
+#define ITOP_MASK_SSPFSSOUT		 (0x1UL << 1)
+#define ITOP_MASK_SSPCLKOUT		 (0x1UL << 2)
+#define ITOP_MASK_SSPOEn		 (0x1UL << 3)
+#define ITOP_MASK_SSPCTLOEn		 (0x1UL << 4)
+#define ITOP_MASK_RORINTR		 (0x1UL << 5)
+#define ITOP_MASK_RTINTR		 (0x1UL << 6)
+#define ITOP_MASK_RXINTR		 (0x1UL << 7)
+#define ITOP_MASK_TXINTR		 (0x1UL << 8)
+#define ITOP_MASK_INTR			 (0x1UL << 9)
+#define ITOP_MASK_RXDMABREQ		 (0x1UL << 10)
+#define ITOP_MASK_RXDMASREQ		 (0x1UL << 11)
+#define ITOP_MASK_TXDMABREQ		 (0x1UL << 12)
+#define ITOP_MASK_TXDMASREQ		 (0x1UL << 13)
+
+/*
+ * SSP Test Data Register - SSP_TDR
+ */
+#define TDR_MASK_TESTDATA 		(0xFFFFFFFF)
+
+/*
+ * Message State
+ * we use the spi_message.state (void *) pointer to
+ * hold a single state value, that's why all this
+ * (void *) casting is done here.
+ */
+#define STATE_START                     ((void *) 0)
+#define STATE_RUNNING                   ((void *) 1)
+#define STATE_DONE                      ((void *) 2)
+#define STATE_ERROR                     ((void *) -1)
+
+/*
+ * Queue State
+ */
+#define QUEUE_RUNNING                   (0)
+#define QUEUE_STOPPED                   (1)
+/*
+ * SSP State - Whether Enabled or Disabled
+ */
+#define SSP_DISABLED 			(0)
+#define SSP_ENABLED 			(1)
+
+/*
+ * SSP DMA State - Whether DMA Enabled or Disabled
+ */
+#define SSP_DMA_DISABLED 		(0)
+#define SSP_DMA_ENABLED 		(1)
+
+/*
+ * SSP Clock Defaults
+ */
+#define NMDK_SSP_DEFAULT_CLKRATE 0x2
+#define NMDK_SSP_DEFAULT_PRESCALE 0x40
+
+/*
+ * SSP Clock Parameter ranges
+ */
+#define CPSDVR_MIN 0x02
+#define CPSDVR_MAX 0xFE
+#define SCR_MIN 0x00
+#define SCR_MAX 0xFF
+
+/*
+ * SSP Interrupt related Macros
+ */
+#define DEFAULT_SSP_REG_IMSC  0x0UL
+#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
+#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+
+#define CLEAR_ALL_INTERRUPTS  0x3
+
+
+/*
+ * The type of reading going on on this chip
+ */
+enum ssp_reading {
+	READING_NULL,
+	READING_U8,
+	READING_U16,
+	READING_U32
+};
+
+/**
+ * The type of writing going on on this chip
+ */
+enum ssp_writing {
+	WRITING_NULL,
+	WRITING_U8,
+	WRITING_U16,
+	WRITING_U32
+};
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL022 derivates
+ * @fifodepth: depth of FIFOs (both)
+ * @max_bpw: maximum number of bits per word
+ * @unidir: supports unidirection transfers
+ */
+struct vendor_data {
+	int fifodepth;
+	int max_bpw;
+	bool unidir;
+};
+
+/**
+ * struct pl022 - This is the private SSP driver data structure
+ * @adev: AMBA device model hookup
+ * @phybase: The physical memory where the SSP device resides
+ * @virtbase: The virtual memory where the SSP is mapped
+ * @master: SPI framework hookup
+ * @master_info: controller-specific data from machine setup
+ * @regs: SSP controller register's virtual address
+ * @pump_messages: Work struct for scheduling work to the workqueue
+ * @lock: spinlock to syncronise access to driver data
+ * @workqueue: a workqueue on which any spi_message request is queued
+ * @busy: workqueue is busy
+ * @run: workqueue is running
+ * @pump_transfers: Tasklet used in Interrupt Transfer mode
+ * @cur_msg: Pointer to current spi_message being processed
+ * @cur_transfer: Pointer to current spi_transfer
+ * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @tx: current position in TX buffer to be read
+ * @tx_end: end position in TX buffer to be read
+ * @rx: current position in RX buffer to be written
+ * @rx_end: end position in RX buffer to be written
+ * @readingtype: the type of read currently going on
+ * @writingtype: the type or write currently going on
+ */
+struct pl022 {
+	struct amba_device		*adev;
+	struct vendor_data		*vendor;
+	resource_size_t			phybase;
+	void __iomem			*virtbase;
+	struct clk			*clk;
+	struct spi_master		*master;
+	struct pl022_ssp_controller	*master_info;
+	/* Driver message queue */
+	struct workqueue_struct		*workqueue;
+	struct work_struct		pump_messages;
+	spinlock_t			queue_lock;
+	struct list_head		queue;
+	int				busy;
+	int				run;
+	/* Message transfer pump */
+	struct tasklet_struct		pump_transfers;
+	struct spi_message		*cur_msg;
+	struct spi_transfer		*cur_transfer;
+	struct chip_data		*cur_chip;
+	void				*tx;
+	void				*tx_end;
+	void				*rx;
+	void				*rx_end;
+	enum ssp_reading		read;
+	enum ssp_writing		write;
+};
+
+/**
+ * struct chip_data - To maintain runtime state of SSP for each client chip
+ * @cr0: Value of control register CR0 of SSP
+ * @cr1: Value of control register CR1 of SSP
+ * @dmacr: Value of DMA control Register of SSP
+ * @cpsr: Value of Clock prescale register
+ * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
+ * @enable_dma: Whether to enable DMA or not
+ * @write: function ptr to be used to write when doing xfer for this chip
+ * @read: function ptr to be used to read when doing xfer for this chip
+ * @cs_control: chip select callback provided by chip
+ * @xfer_type: polling/interrupt/DMA
+ *
+ * Runtime state of the SSP controller, maintained per chip,
+ * This would be set according to the current message that would be served
+ */
+struct chip_data {
+	u16 cr0;
+	u16 cr1;
+	u16 dmacr;
+	u16 cpsr;
+	u8 n_bytes;
+	u8 enable_dma:1;
+	enum ssp_reading read;
+	enum ssp_writing write;
+	void (*cs_control) (u32 command);
+	int xfer_type;
+};
+
+/**
+ * null_cs_control - Dummy chip select function
+ * @command: select/delect the chip
+ *
+ * If no chip select function is provided by client this is used as dummy
+ * chip select
+ */
+static void null_cs_control(u32 command)
+{
+	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
+}
+
+/**
+ * giveback - current spi_message is over, schedule next message and call
+ * callback of this message. Assumes that caller already
+ * set message->status; dma and pio irqs are blocked
+ * @pl022: SSP driver private data structure
+ */
+static void giveback(struct pl022 *pl022)
+{
+	struct spi_transfer *last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+	void (*curr_cs_control) (u32 command);
+
+	/*
+	 * This local reference to the chip select function
+	 * is needed because we set curr_chip to NULL
+	 * as a step toward termininating the message.
+	 */
+	curr_cs_control = pl022->cur_chip->cs_control;
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	msg = pl022->cur_msg;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		/*
+		 * FIXME: This runs in interrupt context.
+		 * Is this really smart?
+		 */
+		udelay(last_transfer->delay_usecs);
+
+	/*
+	 * Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
+	if (!last_transfer->cs_change)
+		curr_cs_control(SSP_CHIP_DESELECT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+		if (list_empty(&pl022->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(pl022->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == STATE_ERROR)
+			curr_cs_control(SSP_CHIP_DESELECT);
+	}
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+	/* This message is completed, so let's turn off the clock! */
+	clk_disable(pl022->clk);
+}
+
+/**
+ * flush - flush the FIFO to reach a clean state
+ * @pl022: SSP driver private data structure
+ */
+static int flush(struct pl022 *pl022)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	dev_dbg(&pl022->adev->dev, "flush\n");
+	do {
+		while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+			readw(SSP_DR(pl022->virtbase));
+	} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+	return limit;
+}
+
+/**
+ * restore_state - Load configuration of current chip
+ * @pl022: SSP driver private data structure
+ */
+static void restore_state(struct pl022 *pl022)
+{
+	struct chip_data *chip = pl022->cur_chip;
+
+	writew(chip->cr0, SSP_CR0(pl022->virtbase));
+	writew(chip->cr1, SSP_CR1(pl022->virtbase));
+	writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
+	writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * load_ssp_default_config - Load default configuration for SSP
+ * @pl022: SSP driver private data structure
+ */
+
+/*
+ * Default SSP Register Values
+ */
+#define DEFAULT_SSP_REG_CR0 ( \
+	GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0)	| \
+	GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
+	GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
+	GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
+	GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16)	| \
+	GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
+)
+
+#define DEFAULT_SSP_REG_CR1 ( \
+	GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
+	GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
+	GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
+	GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
+	GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
+	GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
+	GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
+	GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
+	GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
+)
+
+#define DEFAULT_SSP_REG_CPSR ( \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
+)
+
+#define DEFAULT_SSP_REG_DMACR (\
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
+)
+
+
+static void load_ssp_default_config(struct pl022 *pl022)
+{
+	writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * This will write to TX and read from RX according to the parameters
+ * set in pl022.
+ */
+static void readwriter(struct pl022 *pl022)
+{
+
+	/*
+	 * The FIFO depth is different inbetween primecell variants.
+	 * I believe filling in too much in the FIFO might cause
+	 * errons in 8bit wide transfers on ARM variants (just 8 words
+	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
+	 *
+	 * FIXME: currently we have no logic to account for this.
+	 * perhaps there is even something broken in HW regarding
+	 * 8bit transfers (it doesn't fail on 16bit) so this needs
+	 * more investigation...
+	 */
+	dev_dbg(&pl022->adev->dev,
+		"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
+		__func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
+
+	/* Read as much as you can */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+	       && (pl022->rx < pl022->rx_end)) {
+		switch (pl022->read) {
+		case READING_NULL:
+			readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U8:
+			*(u8 *) (pl022->rx) =
+				readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+			break;
+		case READING_U16:
+			*(u16 *) (pl022->rx) =
+				(u16) readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U32:
+			*(u32 *) (pl022->rx) =
+				readl(SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->rx += (pl022->cur_chip->n_bytes);
+	}
+	/*
+	 * Write as much as you can, while keeping an eye on the RX FIFO!
+	 */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+	       && (pl022->tx < pl022->tx_end)) {
+		switch (pl022->write) {
+		case WRITING_NULL:
+			writew(0x0, SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U8:
+			writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U16:
+			writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U32:
+			writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->tx += (pl022->cur_chip->n_bytes);
+		/*
+		 * This inner reader takes care of things appearing in the RX
+		 * FIFO as we're transmitting. This will happen a lot since the
+		 * clock starts running when you put things into the TX FIFO,
+		 * and then things are continously clocked into the RX FIFO.
+		 */
+		while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+		       && (pl022->rx < pl022->rx_end)) {
+			switch (pl022->read) {
+			case READING_NULL:
+				readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U8:
+				*(u8 *) (pl022->rx) =
+					readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+				break;
+			case READING_U16:
+				*(u16 *) (pl022->rx) =
+					(u16) readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U32:
+				*(u32 *) (pl022->rx) =
+					readl(SSP_DR(pl022->virtbase));
+				break;
+			}
+			pl022->rx += (pl022->cur_chip->n_bytes);
+		}
+	}
+	/*
+	 * When we exit here the TX FIFO should be full and the RX FIFO
+	 * should be empty
+	 */
+}
+
+
+/**
+ * next_transfer - Move to the Next transfer in the current spi message
+ * @pl022: SSP driver private data structure
+ *
+ * This function moves though the linked list of spi transfers in the
+ * current spi message and returns with the state of current spi
+ * message i.e whether its last transfer is done(STATE_DONE) or
+ * Next transfer is ready(STATE_RUNNING)
+ */
+static void *next_transfer(struct pl022 *pl022)
+{
+	struct spi_message *msg = pl022->cur_msg;
+	struct spi_transfer *trans = pl022->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		pl022->cur_transfer =
+		    list_entry(trans->transfer_list.next,
+			       struct spi_transfer, transfer_list);
+		return STATE_RUNNING;
+	}
+	return STATE_DONE;
+}
+/**
+ * pl022_interrupt_handler - Interrupt handler for SSP controller
+ *
+ * This function handles interrupts generated for an interrupt based transfer.
+ * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
+ * current message's state as STATE_ERROR and schedule the tasklet
+ * pump_transfers which will do the postprocessing of the current message by
+ * calling giveback(). Otherwise it reads data from RX FIFO till there is no
+ * more data, and writes data in TX FIFO till it is not full. If we complete
+ * the transfer we move to the next transfer and schedule the tasklet.
+ */
+static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
+{
+	struct pl022 *pl022 = dev_id;
+	struct spi_message *msg = pl022->cur_msg;
+	u16 irq_status = 0;
+	u16 flag = 0;
+
+	if (unlikely(!msg)) {
+		dev_err(&pl022->adev->dev,
+			"bad message state in interrupt handler");
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	/* Read the Interrupt Status Register */
+	irq_status = readw(SSP_MIS(pl022->virtbase));
+
+	if (unlikely(!irq_status))
+		return IRQ_NONE;
+
+	/* This handles the error code interrupts */
+	if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
+		/*
+		 * Overrun interrupt - bail out since our Data has been
+		 * corrupted
+		 */
+		dev_err(&pl022->adev->dev,
+			"FIFO overrun\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
+			dev_err(&pl022->adev->dev,
+				"RXFIFO is full\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+			dev_err(&pl022->adev->dev,
+				"TXFIFO is full\n");
+
+		/*
+		 * Disable and clear interrupts, disable SSP,
+		 * mark message with bad status so it can be
+		 * retried.
+		 */
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		writew((readw(SSP_CR1(pl022->virtbase)) &
+			(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+		msg->state = STATE_ERROR;
+
+		/* Schedule message queue handler */
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	readwriter(pl022);
+
+	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
+		flag = 1;
+		/* Disable Transmit interrupt */
+		writew(readw(SSP_IMSC(pl022->virtbase)) &
+		       (~SSP_IMSC_MASK_TXIM),
+		       SSP_IMSC(pl022->virtbase));
+	}
+
+	/*
+	 * Since all transactions must write as much as shall be read,
+	 * we can conclude the entire transaction once RX is complete.
+	 * At this point, all TX will always be finished.
+	 */
+	if (pl022->rx >= pl022->rx_end) {
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		if (unlikely(pl022->rx > pl022->rx_end)) {
+			dev_warn(&pl022->adev->dev, "read %u surplus "
+				 "bytes (did you request an odd "
+				 "number of bytes on a 16bit bus?)\n",
+				 (u32) (pl022->rx - pl022->rx_end));
+		}
+		/* Update total bytes transfered */
+		msg->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->
+				cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		msg->state = next_transfer(pl022);
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * This sets up the pointers to memory for the next message to
+ * send out on the SPI bus.
+ */
+static int set_up_next_transfer(struct pl022 *pl022,
+				struct spi_transfer *transfer)
+{
+	int residue;
+
+	/* Sanity check the message for this bus width */
+	residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
+	if (unlikely(residue != 0)) {
+		dev_err(&pl022->adev->dev,
+			"message of %u bytes to transmit but the current "
+			"chip bus has a data width of %u bytes!\n",
+			pl022->cur_transfer->len,
+			pl022->cur_chip->n_bytes);
+		dev_err(&pl022->adev->dev, "skipping this message\n");
+		return -EIO;
+	}
+	pl022->tx = (void *)transfer->tx_buf;
+	pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
+	pl022->rx = (void *)transfer->rx_buf;
+	pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
+	pl022->write =
+	    pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
+	pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
+	return 0;
+}
+
+/**
+ * pump_transfers - Tasklet function which schedules next interrupt transfer
+ * when running in interrupt transfer mode.
+ * @data: SSP driver private data structure
+ *
+ */
+static void pump_transfers(unsigned long data)
+{
+	struct pl022 *pl022 = (struct pl022 *) data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+
+	/* Get current state information */
+	message = pl022->cur_msg;
+	transfer = pl022->cur_transfer;
+
+	/* Handle for abort */
+	if (message->state == STATE_ERROR) {
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE) {
+		message->status = 0;
+		giveback(pl022);
+		return;
+	}
+
+	/* Delay if requested at end of transfer before CS change */
+	if (message->state == STATE_RUNNING) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			/*
+			 * FIXME: This runs in interrupt context.
+			 * Is this really smart?
+			 */
+			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	} else {
+		/* STATE_START */
+		message->state = STATE_RUNNING;
+	}
+
+	if (set_up_next_transfer(pl022, transfer)) {
+		message->state = STATE_ERROR;
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Flush the FIFOs and let's go! */
+	flush(pl022);
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+/**
+ * NOT IMPLEMENTED
+ * configure_dma - It configures the DMA pipes for DMA transfers
+ * @data: SSP driver's private data structure
+ *
+ */
+static int configure_dma(void *data)
+{
+	struct pl022 *pl022 = data;
+	dev_dbg(&pl022->adev->dev, "configure DMA\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * do_dma_transfer - It handles transfers of the current message
+ * if it is DMA xfer.
+ * NOT FULLY IMPLEMENTED
+ * @data: SSP driver's private data structure
+ */
+static void do_dma_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	if (configure_dma(data)) {
+		dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
+		goto err_config_dma;
+	}
+
+	/* TODO: Implememt DMA setup of pipes here */
+
+	/* Enable target chip, set up transfer */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+
+	/* TODO: Enable the DMA transfer here */
+	return;
+
+ err_config_dma:
+	pl022->cur_msg->state = STATE_ERROR;
+	pl022->cur_msg->status = -EIO;
+	giveback(pl022);
+	return;
+}
+
+static void do_interrupt_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	/* Enable target chip */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP, turn on interrupts */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+static void do_polling_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip;
+
+	chip = pl022->cur_chip;
+	message = pl022->cur_msg;
+
+	while (message->state != STATE_DONE) {
+		/* Handle for abort */
+		if (message->state == STATE_ERROR)
+			break;
+		transfer = pl022->cur_transfer;
+
+		/* Delay if requested at end of transfer */
+		if (message->state == STATE_RUNNING) {
+			previous =
+			    list_entry(transfer->transfer_list.prev,
+				       struct spi_transfer, transfer_list);
+			if (previous->delay_usecs)
+				udelay(previous->delay_usecs);
+			if (previous->cs_change)
+				pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		} else {
+			/* STATE_START */
+			message->state = STATE_RUNNING;
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		}
+
+		/* Configuration Changing Per Transfer */
+		if (set_up_next_transfer(pl022, transfer)) {
+			/* Error path */
+			message->state = STATE_ERROR;
+			break;
+		}
+		/* Flush FIFOs and enable SSP */
+		flush(pl022);
+		writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+		       SSP_CR1(pl022->virtbase));
+
+		dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
+		/* FIXME: insert a timeout so we don't hang here indefinately */
+		while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
+			readwriter(pl022);
+
+		/* Update total byte transfered */
+		message->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		message->state = next_transfer(pl022);
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE)
+		message->status = 0;
+	else
+		message->status = -EIO;
+
+	giveback(pl022);
+	return;
+}
+
+/**
+ * pump_messages - Workqueue function which processes spi message queue
+ * @data: pointer to private data of SSP driver
+ *
+ * This function checks if there is any spi message in the queue that
+ * needs processing and delegate control to appropriate function
+ * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
+ * based on the kind of the transfer
+ *
+ */
+static void pump_messages(struct work_struct *work)
+{
+	struct pl022 *pl022 =
+		container_of(work, struct pl022, pump_messages);
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
+		pl022->busy = 0;
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Make sure we are not already running a message */
+	if (pl022->cur_msg) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Extract head of queue */
+	pl022->cur_msg =
+	    list_entry(pl022->queue.next, struct spi_message, queue);
+
+	list_del_init(&pl022->cur_msg->queue);
+	pl022->busy = 1;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	/* Initial message state */
+	pl022->cur_msg->state = STATE_START;
+	pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
+					    struct spi_transfer,
+					    transfer_list);
+
+	/* Setup the SPI using the per chip configuration */
+	pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
+	/*
+	 * We enable the clock here, then the clock will be disabled when
+	 * giveback() is called in each method (poll/interrupt/DMA)
+	 */
+	clk_enable(pl022->clk);
+	restore_state(pl022);
+	flush(pl022);
+
+	if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
+		do_polling_transfer(pl022);
+	else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
+		do_interrupt_transfer(pl022);
+	else
+		do_dma_transfer(pl022);
+}
+
+
+static int __init init_queue(struct pl022 *pl022)
+{
+	INIT_LIST_HEAD(&pl022->queue);
+	spin_lock_init(&pl022->queue_lock);
+
+	pl022->run = QUEUE_STOPPED;
+	pl022->busy = 0;
+
+	tasklet_init(&pl022->pump_transfers,
+			pump_transfers,	(unsigned long)pl022);
+
+	INIT_WORK(&pl022->pump_messages, pump_messages);
+	pl022->workqueue = create_singlethread_workqueue(
+					dev_name(pl022->master->dev.parent));
+	if (pl022->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+
+static int start_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -EBUSY;
+	}
+
+	pl022->run = QUEUE_RUNNING;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	return 0;
+}
+
+
+static int stop_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the pl022->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	pl022->run = QUEUE_STOPPED;
+	while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+	}
+
+	if (!list_empty(&pl022->queue) || pl022->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct pl022 *pl022)
+{
+	int status;
+
+	status = stop_queue(pl022);
+	/* we are unloading the module or failing to load (only two calls
+	 * to this routine), and neither call can handle a return value.
+	 * However, destroy_workqueue calls flush_workqueue, and that will
+	 * block until all work is done.  If the reason that stop_queue
+	 * timed out is that the work will never finish, then it does no
+	 * good to call destroy_workqueue, so return anyway. */
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(pl022->workqueue);
+
+	return 0;
+}
+
+static int verify_controller_parameters(struct pl022 *pl022,
+					struct pl022_config_chip *chip_info)
+{
+	if ((chip_info->lbm != LOOPBACK_ENABLED)
+	    && (chip_info->lbm != LOOPBACK_DISABLED)) {
+		dev_err(chip_info->dev,
+			"loopback Mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
+	    || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
+		dev_err(chip_info->dev,
+			"interface is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
+	    (!pl022->vendor->unidir)) {
+		dev_err(chip_info->dev,
+			"unidirectional mode not supported in this "
+			"hardware version\n");
+		return -EINVAL;
+	}
+	if ((chip_info->hierarchy != SSP_MASTER)
+	    && (chip_info->hierarchy != SSP_SLAVE)) {
+		dev_err(chip_info->dev,
+			"hierarchy is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
+	    || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
+		dev_err(chip_info->dev,
+			"cpsdvsr is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_rx != SSP_RX_MSB)
+	    && (chip_info->endian_rx != SSP_RX_LSB)) {
+		dev_err(chip_info->dev,
+			"RX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_tx != SSP_TX_MSB)
+	    && (chip_info->endian_tx != SSP_TX_LSB)) {
+		dev_err(chip_info->dev,
+			"TX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->data_size < SSP_DATA_BITS_4)
+	    || (chip_info->data_size > SSP_DATA_BITS_32)) {
+		dev_err(chip_info->dev,
+			"DATA Size is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->com_mode != INTERRUPT_TRANSFER)
+	    && (chip_info->com_mode != DMA_TRANSFER)
+	    && (chip_info->com_mode != POLLING_TRANSFER)) {
+		dev_err(chip_info->dev,
+			"Communication mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
+	    || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
+		dev_err(chip_info->dev,
+			"RX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
+	    || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
+		dev_err(chip_info->dev,
+			"TX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
+		if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
+		    && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+			dev_err(chip_info->dev,
+				"Clock Phase is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
+		    && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
+			dev_err(chip_info->dev,
+				"Clock Polarity is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
+		if ((chip_info->ctrl_len < SSP_BITS_4)
+		    || (chip_info->ctrl_len > SSP_BITS_32)) {
+			dev_err(chip_info->dev,
+				"CTRL LEN is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
+		    && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
+			dev_err(chip_info->dev,
+				"Wait State is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+		    && (chip_info->duplex !=
+			SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
+			dev_err(chip_info->dev,
+				"DUPLEX is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->cs_control == NULL) {
+		dev_warn(chip_info->dev,
+			"Chip Select Function is NULL for this chip\n");
+		chip_info->cs_control = null_cs_control;
+	}
+	return 0;
+}
+
+/**
+ * pl022_transfer - transfer function registered to SPI master framework
+ * @spi: spi device which is requesting transfer
+ * @msg: spi message which is to handled is queued to driver queue
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will queue the spi_message in the queue of driver if
+ * the queue is not stopped and return.
+ */
+static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -ESHUTDOWN;
+	}
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = STATE_START;
+
+	list_add_tail(&msg->queue, &pl022->queue);
+	if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+		queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+	return 0;
+}
+
+static int calculate_effective_freq(struct pl022 *pl022,
+				    int freq,
+				    struct ssp_clock_params *clk_freq)
+{
+	/* Lets calculate the frequency parameters */
+	u16 cpsdvsr = 2;
+	u16 scr = 0;
+	bool freq_found = false;
+	u32 rate;
+	u32 max_tclk;
+	u32 min_tclk;
+
+	rate = clk_get_rate(pl022->clk);
+	/* cpsdvscr = 2 & scr 0 */
+	max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+	/* cpsdvsr = 254 & scr = 255 */
+	min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+
+	if ((freq <= max_tclk) && (freq >= min_tclk)) {
+		while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
+			while (scr <= SCR_MAX && !freq_found) {
+				if ((rate /
+				     (cpsdvsr * (1 + scr))) > freq)
+					scr += 1;
+				else {
+					/*
+					 * This bool is made true when
+					 * effective frequency >=
+					 * target frequency is found
+					 */
+					freq_found = true;
+					if ((rate /
+					     (cpsdvsr * (1 + scr))) != freq) {
+						if (scr == SCR_MIN) {
+							cpsdvsr -= 2;
+							scr = SCR_MAX;
+						} else
+							scr -= 1;
+					}
+				}
+			}
+			if (!freq_found) {
+				cpsdvsr += 2;
+				scr = SCR_MIN;
+			}
+		}
+		if (cpsdvsr != 0) {
+			dev_dbg(&pl022->adev->dev,
+				"SSP Effective Frequency is %u\n",
+				(rate / (cpsdvsr * (1 + scr))));
+			clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
+			clk_freq->scr = (u8) (scr & 0xFF);
+			dev_dbg(&pl022->adev->dev,
+				"SSP cpsdvsr = %d, scr = %d\n",
+				clk_freq->cpsdvsr, clk_freq->scr);
+		}
+	} else {
+		dev_err(&pl022->adev->dev,
+			"controller data is incorrect: out of range frequency");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * NOT IMPLEMENTED
+ * process_dma_info - Processes the DMA info provided by client drivers
+ * @chip_info: chip info provided by client device
+ * @chip: Runtime state maintained by the SSP controller for each spi device
+ *
+ * This function processes and stores DMA config provided by client driver
+ * into the runtime state maintained by the SSP controller driver
+ */
+static int process_dma_info(struct pl022_config_chip *chip_info,
+			    struct chip_data *chip)
+{
+	dev_err(chip_info->dev,
+		"cannot process DMA info, DMA not implemented!\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * pl022_setup - setup function registered to SPI master framework
+ * @spi: spi device which is requesting setup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. If it is the first time when setup is called by this device,
+ * this function will initialize the runtime state for this chip and save
+ * the same in the device structure. Else it will update the runtime info
+ * with the updated chip info. Nothing is really being written to the
+ * controller hardware here, that is not done until the actual transfer
+ * commence.
+ */
+
+/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
+#define MODEBITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+			| SPI_LSB_FIRST | SPI_LOOP)
+
+static int pl022_setup(struct spi_device *spi)
+{
+	struct pl022_config_chip *chip_info;
+	struct chip_data *chip;
+	int status = 0;
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+
+	if (spi->mode & ~MODEBITS) {
+		dev_dbg(&spi->dev, "unsupported mode bits %x\n",
+			spi->mode & ~MODEBITS);
+		return -EINVAL;
+	}
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	/* Get controller_state if one is supplied */
+	chip = spi_get_ctldata(spi);
+
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip) {
+			dev_err(&spi->dev,
+				"cannot allocate controller state\n");
+			return -ENOMEM;
+		}
+		dev_dbg(&spi->dev,
+			"allocated memory for controller's runtime state\n");
+	}
+
+	/* Get controller data if one is supplied */
+	chip_info = spi->controller_data;
+
+	if (chip_info == NULL) {
+		/* spi_board_info.controller_data not is supplied */
+		dev_dbg(&spi->dev,
+			"using default controller_data settings\n");
+
+		chip_info =
+			kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
+
+		if (!chip_info) {
+			dev_err(&spi->dev,
+				"cannot allocate controller data\n");
+			status = -ENOMEM;
+			goto err_first_setup;
+		}
+
+		dev_dbg(&spi->dev, "allocated memory for controller data\n");
+
+		/* Pointer back to the SPI device */
+		chip_info->dev = &spi->dev;
+		/*
+		 * Set controller data default values:
+		 * Polling is supported by default
+		 */
+		chip_info->lbm = LOOPBACK_DISABLED;
+		chip_info->com_mode = POLLING_TRANSFER;
+		chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
+		chip_info->hierarchy = SSP_SLAVE;
+		chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
+		chip_info->endian_tx = SSP_TX_LSB;
+		chip_info->endian_rx = SSP_RX_LSB;
+		chip_info->data_size = SSP_DATA_BITS_12;
+		chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
+		chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
+		chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+		chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
+		chip_info->ctrl_len = SSP_BITS_8;
+		chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
+		chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
+		chip_info->cs_control = null_cs_control;
+	} else {
+		dev_dbg(&spi->dev,
+			"using user supplied controller_data settings\n");
+	}
+
+	/*
+	 * We can override with custom divisors, else we use the board
+	 * frequency setting
+	 */
+	if ((0 == chip_info->clk_freq.cpsdvsr)
+	    && (0 == chip_info->clk_freq.scr)) {
+		status = calculate_effective_freq(pl022,
+						  spi->max_speed_hz,
+						  &chip_info->clk_freq);
+		if (status < 0)
+			goto err_config_params;
+	} else {
+		if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
+			chip_info->clk_freq.cpsdvsr =
+				chip_info->clk_freq.cpsdvsr - 1;
+	}
+	status = verify_controller_parameters(pl022, chip_info);
+	if (status) {
+		dev_err(&spi->dev, "controller data is incorrect");
+		goto err_config_params;
+	}
+	/* Now set controller state based on controller data */
+	chip->xfer_type = chip_info->com_mode;
+	chip->cs_control = chip_info->cs_control;
+
+	if (chip_info->data_size <= 8) {
+		dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
+		chip->n_bytes = 1;
+		chip->read = READING_U8;
+		chip->write = WRITING_U8;
+	} else if (chip_info->data_size <= 16) {
+		dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
+		chip->n_bytes = 2;
+		chip->read = READING_U16;
+		chip->write = WRITING_U16;
+	} else {
+		if (pl022->vendor->max_bpw >= 32) {
+			dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+			chip->n_bytes = 4;
+			chip->read = READING_U32;
+			chip->write = WRITING_U32;
+		} else {
+			dev_err(&spi->dev,
+				"illegal data size for this controller!\n");
+			dev_err(&spi->dev,
+				"a standard pl022 can only handle "
+				"1 <= n <= 16 bit words\n");
+			goto err_config_params;
+		}
+	}
+
+	/* Now Initialize all register settings required for this chip */
+	chip->cr0 = 0;
+	chip->cr1 = 0;
+	chip->dmacr = 0;
+	chip->cpsr = 0;
+	if ((chip_info->com_mode == DMA_TRANSFER)
+	    && ((pl022->master_info)->enable_dma)) {
+		chip->enable_dma = 1;
+		dev_dbg(&spi->dev, "DMA mode set in controller state\n");
+		status = process_dma_info(chip_info, chip);
+		if (status < 0)
+			goto err_config_params;
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	} else {
+		chip->enable_dma = 0;
+		dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	}
+
+	chip->cpsr = chip_info->clk_freq.cpsdvsr;
+
+	SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
+	SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
+	SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
+	SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
+	SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
+	SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
+	SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
+	SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
+	SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
+	SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
+	SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
+
+	/* Save controller_state */
+	spi_set_ctldata(spi, chip);
+	return status;
+ err_config_params:
+ err_first_setup:
+	kfree(chip);
+	return status;
+}
+
+/**
+ * pl022_cleanup - cleanup function registered to SPI master framework
+ * @spi: spi device which is requesting cleanup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will free the runtime state of chip.
+ */
+static void pl022_cleanup(struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata(spi);
+
+	spi_set_ctldata(spi, NULL);
+	kfree(chip);
+}
+
+
+static int __init
+pl022_probe(struct amba_device *adev, struct amba_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
+	struct spi_master *master;
+	struct pl022 *pl022 = NULL;	/*Data for this driver */
+	int status = 0;
+
+	dev_info(&adev->dev,
+		 "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
+	if (platform_info == NULL) {
+		dev_err(&adev->dev, "probe - no platform data supplied\n");
+		status = -ENODEV;
+		goto err_no_pdata;
+	}
+
+	/* Allocate master with space for data */
+	master = spi_alloc_master(dev, sizeof(struct pl022));
+	if (master == NULL) {
+		dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
+		status = -ENOMEM;
+		goto err_no_master;
+	}
+
+	pl022 = spi_master_get_devdata(master);
+	pl022->master = master;
+	pl022->master_info = platform_info;
+	pl022->adev = adev;
+	pl022->vendor = id->data;
+
+	/*
+	 * Bus Number Which has been Assigned to this SSP controller
+	 * on this board
+	 */
+	master->bus_num = platform_info->bus_id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = pl022_cleanup;
+	master->setup = pl022_setup;
+	master->transfer = pl022_transfer;
+
+	dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
+
+	status = amba_request_regions(adev, NULL);
+	if (status)
+		goto err_no_ioregion;
+
+	pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+	if (pl022->virtbase == NULL) {
+		status = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
+	       adev->res.start, pl022->virtbase);
+
+	pl022->clk = clk_get(&adev->dev, NULL);
+	if (IS_ERR(pl022->clk)) {
+		status = PTR_ERR(pl022->clk);
+		dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
+		goto err_no_clk;
+	}
+
+	/* Disable SSP */
+	clk_enable(pl022->clk);
+	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
+	       SSP_CR1(pl022->virtbase));
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+
+	status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
+			     pl022);
+	if (status < 0) {
+		dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
+		goto err_no_irq;
+	}
+	/* Initialize and start queue */
+	status = init_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem initializing queue\n");
+		goto err_init_queue;
+	}
+	status = start_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem starting queue\n");
+		goto err_start_queue;
+	}
+	/* Register with the SPI framework */
+	amba_set_drvdata(adev, pl022);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"probe - problem registering spi master\n");
+		goto err_spi_register;
+	}
+	dev_dbg(dev, "probe succeded\n");
+	return 0;
+
+ err_spi_register:
+ err_start_queue:
+ err_init_queue:
+	destroy_queue(pl022);
+	free_irq(adev->irq[0], pl022);
+ err_no_irq:
+	clk_put(pl022->clk);
+ err_no_clk:
+	iounmap(pl022->virtbase);
+ err_no_ioremap:
+	amba_release_regions(adev);
+ err_no_ioregion:
+	spi_master_put(master);
+ err_no_master:
+ err_no_pdata:
+	return status;
+}
+
+static int __exit
+pl022_remove(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+	if (!pl022)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"queue remove failed (%d)\n", status);
+		return status;
+	}
+	load_ssp_default_config(pl022);
+	free_irq(adev->irq[0], pl022);
+	clk_disable(pl022->clk);
+	clk_put(pl022->clk);
+	iounmap(pl022->virtbase);
+	amba_release_regions(adev);
+	tasklet_disable(&pl022->pump_transfers);
+	spi_unregister_master(pl022->master);
+	spi_master_put(pl022->master);
+	amba_set_drvdata(adev, NULL);
+	dev_dbg(&adev->dev, "remove succeded\n");
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	status = stop_queue(pl022);
+	if (status) {
+		dev_warn(&adev->dev, "suspend cannot stop queue\n");
+		return status;
+	}
+
+	clk_enable(pl022->clk);
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+	dev_dbg(&adev->dev, "suspended\n");
+	return 0;
+}
+
+static int pl022_resume(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	/* Start the queue running */
+	status = start_queue(pl022);
+	if (status)
+		dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+	else
+		dev_dbg(&adev->dev, "resumed\n");
+
+	return status;
+}
+#else
+#define pl022_suspend NULL
+#define pl022_resume NULL
+#endif	/* CONFIG_PM */
+
+static struct vendor_data vendor_arm = {
+	.fifodepth = 8,
+	.max_bpw = 16,
+	.unidir = false,
+};
+
+
+static struct vendor_data vendor_st = {
+	.fifodepth = 32,
+	.max_bpw = 32,
+	.unidir = false,
+};
+
+static struct amba_id pl022_ids[] = {
+	{
+		/*
+		 * ARM PL022 variant, this has a 16bit wide
+		 * and 8 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00041022,
+		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		/*
+		 * ST Micro derivative, this has 32bit wide
+		 * and 32 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00108022,
+		.mask	= 0xffffffff,
+		.data	= &vendor_st,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl022_driver = {
+	.drv = {
+		.name	= "ssp-pl022",
+	},
+	.id_table	= pl022_ids,
+	.probe		= pl022_probe,
+	.remove		= __exit_p(pl022_remove),
+	.suspend        = pl022_suspend,
+	.resume         = pl022_resume,
+};
+
+
+static int __init pl022_init(void)
+{
+	return amba_driver_register(&pl022_driver);
+}
+
+module_init(pl022_init);
+
+static void __exit pl022_exit(void)
+{
+	amba_driver_unregister(&pl022_driver);
+}
+
+module_exit(pl022_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5476b..bbf9371cd28 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
index 7dc3a6b4139..a0e0d246b59 100644
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -29,6 +29,7 @@ int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL(ssb_watchdog_timer_set);
 
 u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
 {
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt
index 9f6772bc68c..1c2907c1dc8 100644
--- a/drivers/staging/go7007/go7007.txt
+++ b/drivers/staging/go7007/go7007.txt
@@ -2,7 +2,7 @@ This is a driver for the WIS GO7007SB multi-format video encoder.
 
 Pete Eberlein <pete@sensoray.com>
 
-The driver was orignally released under the GPL and is currently hosted at:
+The driver was originally released under the GPL and is currently hosted at:
 http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
 The go7007 firmware can be acquired from the package on the site above.
 
@@ -24,7 +24,7 @@ These should be used instead of the non-standard GO7007 ioctls described
 below.
 
 
-The README files from the orignal package appear below:
+The README files from the original package appears below:
 
 ---------------------------------------------------------------------------
                      WIS GO7007SB Public Linux Driver
diff --git a/drivers/staging/panel/lcd-panel-cgram.txt b/drivers/staging/panel/lcd-panel-cgram.txt
index f9ceef4322a..7f82c905763 100644
--- a/drivers/staging/panel/lcd-panel-cgram.txt
+++ b/drivers/staging/panel/lcd-panel-cgram.txt
@@ -3,7 +3,7 @@ characters 0 to 7. The escape code to define a new character is
 '\e[LG' followed by one digit from 0 to 7, representing the character
 number, and up to 8 couples of hex digits terminated by a semi-colon
 (';'). Each couple of digits represents a line, with 1-bits for each
-illuminated pixel with LSB on the right. Lines are numberred from the
+illuminated pixel with LSB on the right. Lines are numbered from the
 top of the character to the bottom. On a 5x7 matrix, only the 5 lower
 bits of the 7 first bytes are used for each character. If the string
 is incomplete, only complete lines will be redefined. Here are some
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index c00f9ab9c46..2edf2999f5c 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -5664,7 +5664,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index 8a82cee8bf2..a26bc033337 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -5561,7 +5561,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 0ffbfa36699..0189bab013c 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -5575,7 +5575,7 @@ VOID 	AsicUpdateProtect(
 	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
 	MacReg &= 0xFF0000FF;
 
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
     if ((
 #ifdef DOT11_N_SUPPORT
 		(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 888198c9a10..824e65bdc43 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -2424,7 +2424,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 *	0		success
 *	>0		f/w reported error - f/w status code
 *	<0		driver reported error
-*	-ETIMEOUT	timout waiting for the cmd regs to become
+*	-ETIMEDOUT	timout waiting for the cmd regs to become
 *			available, or waiting for the control reg
 *			to indicate the Aux port is enabled.
 *	-ENODATA	the buffer does NOT contain a valid PDA.
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index d0b093b66ad..5e38ba10a3a 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 		switch (trip_type) {
 		case THERMAL_TRIP_CRITICAL:
-			if (temp > trip_temp) {
+			if (temp >= trip_temp) {
 				if (tz->ops->notify)
 					ret = tz->ops->notify(tz, count,
 							      trip_type);
@@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 			}
 			break;
 		case THERMAL_TRIP_HOT:
-			if (temp > trip_temp)
+			if (temp >= trip_temp)
 				if (tz->ops->notify)
 					tz->ops->notify(tz, count, trip_type);
 			break;
@@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 				cdev = instance->cdev;
 
-				if (temp > trip_temp)
+				if (temp >= trip_temp)
 					cdev->ops->set_cur_state(cdev, 1);
 				else
 					cdev->ops->set_cur_state(cdev, 0);
 			}
 			break;
 		case THERMAL_TRIP_PASSIVE:
-			if (temp > trip_temp || tz->passive)
+			if (temp >= trip_temp || tz->passive)
 				thermal_zone_device_passive(tz, temp,
 							    trip_temp, count);
 			break;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index c6c816b7ecb..5eee3f82be5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
 	default y if SUPERH				# r8a66597-hcd
+	default y if MICROBLAZE
 	default PCI
 
 # many non-PCI SOC chips embed OHCI
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0716cdb44cd..0a3dc5ece63 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON)		+= mon/
 obj-$(CONFIG_PCI)		+= host/
 obj-$(CONFIG_USB_EHCI_HCD)	+= host/
 obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
-obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/
 obj-$(CONFIG_USB_UHCI_HCD)	+= host/
 obj-$(CONFIG_USB_FHCI_HCD)	+= host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0a69c0977e3..ddeb6919253 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -16,7 +16,8 @@
  *	v0.9  - thorough cleaning, URBification, almost a rewrite
  *	v0.10 - some more cleanups
  *	v0.11 - fixed flow control, read error doesn't stop reads
- *	v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced
+ *	v0.12 - added TIOCM ioctls, added break handling, made struct acm
+ *		kmalloced
  *	v0.13 - added termios, added hangup
  *	v0.14 - sized down struct acm
  *	v0.15 - fixed flow control again - characters could be lost
@@ -62,7 +63,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/cdc.h>
 #include <asm/byteorder.h>
@@ -87,7 +88,10 @@ static struct acm *acm_table[ACM_TTY_MINORS];
 
 static DEFINE_MUTEX(open_mutex);
 
-#define ACM_READY(acm)	(acm && acm->dev && acm->used)
+#define ACM_READY(acm)	(acm && acm->dev && acm->port.count)
+
+static const struct tty_port_operations acm_port_ops = {
+};
 
 #ifdef VERBOSE_DEBUG
 #define verbose	1
@@ -99,13 +103,15 @@ static DEFINE_MUTEX(open_mutex);
  * Functions for ACM control messages.
  */
 
-static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len)
+static int acm_ctrl_msg(struct acm *acm, int request, int value,
+							void *buf, int len)
 {
 	int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
 		request, USB_RT_ACM, value,
 		acm->control->altsetting[0].desc.bInterfaceNumber,
 		buf, len, 5000);
-	dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval);
+	dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d",
+						request, value, len, retval);
 	return retval < 0 ? retval : 0;
 }
 
@@ -150,9 +156,8 @@ static int acm_wb_is_avail(struct acm *acm)
 
 	n = ACM_NW;
 	spin_lock_irqsave(&acm->write_lock, flags);
-	for (i = 0; i < ACM_NW; i++) {
+	for (i = 0; i < ACM_NW; i++)
 		n -= acm->wb[i].use;
-	}
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 	return n;
 }
@@ -183,7 +188,8 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 	wb->urb->transfer_buffer_length = wb->len;
 	wb->urb->dev = acm->dev;
 
-	if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) {
+	rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
+	if (rc < 0) {
 		dbg("usb_submit_urb(write bulk) failed: %d", rc);
 		acm_write_done(acm, wb);
 	}
@@ -262,6 +268,7 @@ static void acm_ctrl_irq(struct urb *urb)
 {
 	struct acm *acm = urb->context;
 	struct usb_cdc_notification *dr = urb->transfer_buffer;
+	struct tty_struct *tty;
 	unsigned char *data;
 	int newctrl;
 	int retval;
@@ -287,40 +294,45 @@ static void acm_ctrl_irq(struct urb *urb)
 
 	data = (unsigned char *)(dr + 1);
 	switch (dr->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		dbg("%s network", dr->wValue ?
+					"connected to" : "disconnected from");
+		break;
 
-		case USB_CDC_NOTIFY_NETWORK_CONNECTION:
-
-			dbg("%s network", dr->wValue ? "connected to" : "disconnected from");
-			break;
-
-		case USB_CDC_NOTIFY_SERIAL_STATE:
-
-			newctrl = get_unaligned_le16(data);
+	case USB_CDC_NOTIFY_SERIAL_STATE:
+		tty = tty_port_tty_get(&acm->port);
+		newctrl = get_unaligned_le16(data);
 
-			if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
+		if (tty) {
+			if (!acm->clocal &&
+				(acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
 				dbg("calling hangup");
-				tty_hangup(acm->tty);
+				tty_hangup(tty);
 			}
+			tty_kref_put(tty);
+		}
 
-			acm->ctrlin = newctrl;
-
-			dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
-				acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',	acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',	acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',	acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
+		acm->ctrlin = newctrl;
 
+		dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
+			acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
 			break;
 
-		default:
-			dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
-				dr->bNotificationType, dr->wIndex,
-				dr->wLength, data[0], data[1]);
-			break;
+	default:
+		dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
+			dr->bNotificationType, dr->wIndex,
+			dr->wLength, data[0], data[1]);
+		break;
 	}
 exit:
 	usb_mark_last_busy(acm->dev);
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with "
 			"result %d", __func__, retval);
@@ -371,15 +383,14 @@ static void acm_rx_tasklet(unsigned long _acm)
 {
 	struct acm *acm = (void *)_acm;
 	struct acm_rb *buf;
-	struct tty_struct *tty = acm->tty;
+	struct tty_struct *tty;
 	struct acm_ru *rcv;
 	unsigned long flags;
 	unsigned char throttled;
 
 	dbg("Entering acm_rx_tasklet");
 
-	if (!ACM_READY(acm))
-	{
+	if (!ACM_READY(acm)) {
 		dbg("acm_rx_tasklet: ACM not ready");
 		return;
 	}
@@ -387,12 +398,13 @@ static void acm_rx_tasklet(unsigned long _acm)
 	spin_lock_irqsave(&acm->throttle_lock, flags);
 	throttled = acm->throttle;
 	spin_unlock_irqrestore(&acm->throttle_lock, flags);
-	if (throttled)
-	{
+	if (throttled) {
 		dbg("acm_rx_tasklet: throttled");
 		return;
 	}
 
+	tty = tty_port_tty_get(&acm->port);
+
 next_buffer:
 	spin_lock_irqsave(&acm->read_lock, flags);
 	if (list_empty(&acm->filled_read_bufs)) {
@@ -406,20 +418,22 @@ next_buffer:
 
 	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
-	tty_buffer_request_room(tty, buf->size);
-	spin_lock_irqsave(&acm->throttle_lock, flags);
-	throttled = acm->throttle;
-	spin_unlock_irqrestore(&acm->throttle_lock, flags);
-	if (!throttled)
-		tty_insert_flip_string(tty, buf->base, buf->size);
-	tty_flip_buffer_push(tty);
-
-	if (throttled) {
-		dbg("Throttling noticed");
-		spin_lock_irqsave(&acm->read_lock, flags);
-		list_add(&buf->list, &acm->filled_read_bufs);
-		spin_unlock_irqrestore(&acm->read_lock, flags);
-		return;
+	if (tty) {
+		spin_lock_irqsave(&acm->throttle_lock, flags);
+		throttled = acm->throttle;
+		spin_unlock_irqrestore(&acm->throttle_lock, flags);
+		if (!throttled) {
+			tty_buffer_request_room(tty, buf->size);
+			tty_insert_flip_string(tty, buf->base, buf->size);
+			tty_flip_buffer_push(tty);
+		} else {
+			tty_kref_put(tty);
+			dbg("Throttling noticed");
+			spin_lock_irqsave(&acm->read_lock, flags);
+			list_add(&buf->list, &acm->filled_read_bufs);
+			spin_unlock_irqrestore(&acm->read_lock, flags);
+			return;
+		}
 	}
 
 	spin_lock_irqsave(&acm->read_lock, flags);
@@ -428,6 +442,8 @@ next_buffer:
 	goto next_buffer;
 
 urbs:
+	tty_kref_put(tty);
+
 	while (!list_empty(&acm->spare_read_bufs)) {
 		spin_lock_irqsave(&acm->read_lock, flags);
 		if (list_empty(&acm->spare_read_urbs)) {
@@ -454,10 +470,11 @@ urbs:
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-		/* This shouldn't kill the driver as unsuccessful URBs are returned to the
-		   free-urbs-pool and resubmited ASAP */
+		/* This shouldn't kill the driver as unsuccessful URBs are
+		   returned to the free-urbs-pool and resubmited ASAP */
 		spin_lock_irqsave(&acm->read_lock, flags);
-		if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
+		if (acm->susp_count ||
+				usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
 			list_add(&buf->list, &acm->spare_read_bufs);
 			list_add(&rcv->list, &acm->spare_read_urbs);
 			acm->processing = 0;
@@ -499,11 +516,14 @@ static void acm_write_bulk(struct urb *urb)
 static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
+	struct tty_struct *tty;
 
 	dev_vdbg(&acm->data->dev, "tx work\n");
 	if (!ACM_READY(acm))
 		return;
-	tty_wakeup(acm->tty);
+	tty = tty_port_tty_get(&acm->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void acm_waker(struct work_struct *waker)
@@ -543,8 +563,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		rv = 0;
 
 	set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+
 	tty->driver_data = acm;
-	acm->tty = tty;
+	tty_port_tty_set(&acm->port, tty);
 
 	if (usb_autopm_get_interface(acm->control) < 0)
 		goto early_bail;
@@ -552,11 +573,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		acm->control->needs_remote_wakeup = 1;
 
 	mutex_lock(&acm->mutex);
-	if (acm->used++) {
+	if (acm->port.count++) {
 		usb_autopm_put_interface(acm->control);
 		goto done;
-        }
-
+	}
 
 	acm->ctrlurb->dev = acm->dev;
 	if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) {
@@ -567,22 +587,22 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
 	    (acm->ctrl_caps & USB_CDC_CAP_LINE))
 		goto full_bailout;
+
 	usb_autopm_put_interface(acm->control);
 
 	INIT_LIST_HEAD(&acm->spare_read_urbs);
 	INIT_LIST_HEAD(&acm->spare_read_bufs);
 	INIT_LIST_HEAD(&acm->filled_read_bufs);
-	for (i = 0; i < acm->rx_buflimit; i++) {
+
+	for (i = 0; i < acm->rx_buflimit; i++)
 		list_add(&(acm->ru[i].list), &acm->spare_read_urbs);
-	}
-	for (i = 0; i < acm->rx_buflimit; i++) {
+	for (i = 0; i < acm->rx_buflimit; i++)
 		list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
-	}
 
 	acm->throttle = 0;
 
 	tasklet_schedule(&acm->urb_task);
-
+	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 done:
 	mutex_unlock(&acm->mutex);
 err_out:
@@ -593,16 +613,17 @@ full_bailout:
 	usb_kill_urb(acm->ctrlurb);
 bail_out:
 	usb_autopm_put_interface(acm->control);
-	acm->used--;
+	acm->port.count--;
 	mutex_unlock(&acm->mutex);
 early_bail:
 	mutex_unlock(&open_mutex);
+	tty_port_tty_set(&acm->port, NULL);
 	return -EIO;
 }
 
 static void acm_tty_unregister(struct acm *acm)
 {
-	int i,nr;
+	int i, nr;
 
 	nr = acm->rx_buflimit;
 	tty_unregister_device(acm_tty_driver, acm->minor);
@@ -619,41 +640,56 @@ static void acm_tty_unregister(struct acm *acm)
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty);
 
+static void acm_port_down(struct acm *acm, int drain)
+{
+	int i, nr = acm->rx_buflimit;
+	mutex_lock(&open_mutex);
+	if (acm->dev) {
+		usb_autopm_get_interface(acm->control);
+		acm_set_control(acm, acm->ctrlout = 0);
+		/* try letting the last writes drain naturally */
+		if (drain) {
+			wait_event_interruptible_timeout(acm->drain_wait,
+				(ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
+					ACM_CLOSE_TIMEOUT * HZ);
+		}
+		usb_kill_urb(acm->ctrlurb);
+		for (i = 0; i < ACM_NW; i++)
+			usb_kill_urb(acm->wb[i].urb);
+		for (i = 0; i < nr; i++)
+			usb_kill_urb(acm->ru[i].urb);
+		acm->control->needs_remote_wakeup = 0;
+		usb_autopm_put_interface(acm->control);
+	}
+	mutex_unlock(&open_mutex);
+}
+
+static void acm_tty_hangup(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+	tty_port_hangup(&acm->port);
+	acm_port_down(acm, 0);
+}
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
-	int i,nr;
 
-	if (!acm || !acm->used)
+	/* Perform the closing process and see if we need to do the hardware
+	   shutdown */
+	if (tty_port_close_start(&acm->port, tty, filp) == 0)
 		return;
-
-	nr = acm->rx_buflimit;
+	acm_port_down(acm, 0);
+	tty_port_close_end(&acm->port, tty);
 	mutex_lock(&open_mutex);
-	if (!--acm->used) {
-		if (acm->dev) {
-			usb_autopm_get_interface(acm->control);
-			acm_set_control(acm, acm->ctrlout = 0);
-
-			/* try letting the last writes drain naturally */
-			wait_event_interruptible_timeout(acm->drain_wait,
-					(ACM_NW == acm_wb_is_avail(acm))
-						|| !acm->dev,
-					ACM_CLOSE_TIMEOUT * HZ);
-
-			usb_kill_urb(acm->ctrlurb);
-			for (i = 0; i < ACM_NW; i++)
-				usb_kill_urb(acm->wb[i].urb);
-			for (i = 0; i < nr; i++)
-				usb_kill_urb(acm->ru[i].urb);
-			acm->control->needs_remote_wakeup = 0;
-			usb_autopm_put_interface(acm->control);
-		} else
-			acm_tty_unregister(acm);
-	}
+	tty_port_tty_set(&acm->port, NULL);
+	if (!acm->dev)
+		acm_tty_unregister(acm);
 	mutex_unlock(&open_mutex);
 }
 
-static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int acm_tty_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
 {
 	struct acm *acm = tty->driver_data;
 	int stat;
@@ -669,7 +705,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 		return 0;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
-	if ((wbn = acm_wb_alloc(acm)) < 0) {
+	wbn = acm_wb_alloc(acm);
+	if (wbn < 0) {
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;
 	}
@@ -681,7 +718,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 	wb->len = count;
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 
-	if ((stat = acm_write_start(acm, wbn)) < 0)
+	stat = acm_write_start(acm, wbn);
+	if (stat < 0)
 		return stat;
 	return count;
 }
@@ -767,8 +805,10 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 		return -EINVAL;
 
 	newctrl = acm->ctrlout;
-	set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
-	clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+	set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+					(set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+	clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+					(clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
 
 	newctrl = (newctrl & ~clear) | set;
 
@@ -777,7 +817,8 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 	return acm_set_control(acm, acm->ctrlout = newctrl);
 }
 
-static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int acm_tty_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct acm *acm = tty->driver_data;
 
@@ -799,7 +840,8 @@ static const __u8 acm_tty_size[] = {
 	5, 6, 7, 8
 };
 
-static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old)
+static void acm_tty_set_termios(struct tty_struct *tty,
+						struct ktermios *termios_old)
 {
 	struct acm *acm = tty->driver_data;
 	struct ktermios *termios = tty->termios;
@@ -809,19 +851,23 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios
 	if (!ACM_READY(acm))
 		return;
 
+	/* FIXME: Needs to support the tty_baud interface */
+	/* FIXME: Broken on sparc */
 	newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
 		(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
 	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
 	newline.bParityType = termios->c_cflag & PARENB ?
-		(termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0;
+				(termios->c_cflag & PARODD ? 1 : 2) +
+				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
 	newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
-
+	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
 	if (!newline.dwDTERate) {
 		newline.dwDTERate = acm->line.dwDTERate;
 		newctrl &= ~ACM_CTRL_DTR;
-	} else  newctrl |=  ACM_CTRL_DTR;
+	} else
+		newctrl |=  ACM_CTRL_DTR;
 
 	if (newctrl != acm->ctrlout)
 		acm_set_control(acm, acm->ctrlout = newctrl);
@@ -846,9 +892,8 @@ static void acm_write_buffers_free(struct acm *acm)
 	struct acm_wb *wb;
 	struct usb_device *usb_dev = interface_to_usbdev(acm->control);
 
-	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
+	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
 		usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah);
-	}
 }
 
 static void acm_read_buffers_free(struct acm *acm)
@@ -857,7 +902,8 @@ static void acm_read_buffers_free(struct acm *acm)
 	int i, n = acm->rx_buflimit;
 
 	for (i = 0; i < n; i++)
-		usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
+		usb_buffer_free(usb_dev, acm->readsize,
+					acm->rb[i].base, acm->rb[i].dma);
 }
 
 /* Little helper: write buffers allocate */
@@ -882,8 +928,8 @@ static int acm_write_buffers_alloc(struct acm *acm)
 	return 0;
 }
 
-static int acm_probe (struct usb_interface *intf,
-		      const struct usb_device_id *id)
+static int acm_probe(struct usb_interface *intf,
+		     const struct usb_device_id *id)
 {
 	struct usb_cdc_union_desc *union_header = NULL;
 	struct usb_cdc_country_functional_desc *cfd = NULL;
@@ -897,7 +943,7 @@ static int acm_probe (struct usb_interface *intf,
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct acm *acm;
 	int minor;
-	int ctrlsize,readsize;
+	int ctrlsize, readsize;
 	u8 *buf;
 	u8 ac_management_function = 0;
 	u8 call_management_function = 0;
@@ -917,7 +963,7 @@ static int acm_probe (struct usb_interface *intf,
 		control_interface = usb_ifnum_to_if(usb_dev, 0);
 		goto skip_normal_probe;
 	}
-	
+
 	/* normal probing*/
 	if (!buffer) {
 		dev_err(&intf->dev, "Weird descriptor references\n");
@@ -925,8 +971,10 @@ static int acm_probe (struct usb_interface *intf,
 	}
 
 	if (!buflen) {
-		if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+		if (intf->cur_altsetting->endpoint->extralen &&
+				intf->cur_altsetting->endpoint->extra) {
+			dev_dbg(&intf->dev,
+				"Seeking extra descriptors on endpoint\n");
 			buflen = intf->cur_altsetting->endpoint->extralen;
 			buffer = intf->cur_altsetting->endpoint->extra;
 		} else {
@@ -937,47 +985,43 @@ static int acm_probe (struct usb_interface *intf,
 	}
 
 	while (buflen > 0) {
-		if (buffer [1] != USB_DT_CS_INTERFACE) {
+		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
 		}
 
-		switch (buffer [2]) {
-			case USB_CDC_UNION_TYPE: /* we've found it */
-				if (union_header) {
-					dev_err(&intf->dev, "More than one "
-						"union descriptor, "
-						"skipping ...\n");
-					goto next_desc;
-				}
-				union_header = (struct usb_cdc_union_desc *)
-							buffer;
-				break;
-			case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
-				cfd = (struct usb_cdc_country_functional_desc *)buffer;
-				break;
-			case USB_CDC_HEADER_TYPE: /* maybe check version */ 
-				break; /* for now we ignore it */ 
-			case USB_CDC_ACM_TYPE:
-				ac_management_function = buffer[3];
-				break;
-			case USB_CDC_CALL_MANAGEMENT_TYPE:
-				call_management_function = buffer[3];
-				call_interface_num = buffer[4];
-				if ((call_management_function & 3) != 3)
-					dev_err(&intf->dev, "This device "
-						"cannot do calls on its own. "
-						"It is no modem.\n");
-				break;
-			default:
-				/* there are LOTS more CDC descriptors that
-				 * could legitimately be found here.
-				 */
-				dev_dbg(&intf->dev, "Ignoring descriptor: "
-						"type %02x, length %d\n",
-						buffer[2], buffer[0]);
-				break;
+		switch (buffer[2]) {
+		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (union_header) {
+				dev_err(&intf->dev, "More than one "
+					"union descriptor, skipping ...\n");
+				goto next_desc;
 			}
+			union_header = (struct usb_cdc_union_desc *)buffer;
+			break;
+		case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+			cfd = (struct usb_cdc_country_functional_desc *)buffer;
+			break;
+		case USB_CDC_HEADER_TYPE: /* maybe check version */
+			break; /* for now we ignore it */
+		case USB_CDC_ACM_TYPE:
+			ac_management_function = buffer[3];
+			break;
+		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			call_management_function = buffer[3];
+			call_interface_num = buffer[4];
+			if ((call_management_function & 3) != 3)
+				dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
+			break;
+		default:
+			/* there are LOTS more CDC descriptors that
+			 * could legitimately be found here.
+			 */
+			dev_dbg(&intf->dev, "Ignoring descriptor: "
+					"type %02x, length %d\n",
+					buffer[2], buffer[0]);
+			break;
+		}
 next_desc:
 		buflen -= buffer[0];
 		buffer += buffer[0];
@@ -985,33 +1029,36 @@ next_desc:
 
 	if (!union_header) {
 		if (call_interface_num > 0) {
-			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+			dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+			dev_dbg(&intf->dev,
+					"No union descriptor, giving up\n");
 			return -ENODEV;
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
 		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev,"no interfaces\n");
+			dev_dbg(&intf->dev, "no interfaces\n");
 			return -ENODEV;
 		}
 	}
-	
+
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
 
 skip_normal_probe:
 
 	/*workaround for switched interfaces */
-	if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
-		if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
+	if (data_interface->cur_altsetting->desc.bInterfaceClass
+						!= CDC_DATA_INTERFACE_TYPE) {
+		if (control_interface->cur_altsetting->desc.bInterfaceClass
+						== CDC_DATA_INTERFACE_TYPE) {
 			struct usb_interface *t;
-			dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
-
+			dev_dbg(&intf->dev,
+				"Your device has switched interfaces.\n");
 			t = control_interface;
 			control_interface = data_interface;
 			data_interface = t;
@@ -1023,9 +1070,9 @@ skip_normal_probe:
 	/* Accept probe requests only for the control interface */
 	if (intf != control_interface)
 		return -ENODEV;
-	
+
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
-		dev_dbg(&intf->dev,"The data interface isn't available\n");
+		dev_dbg(&intf->dev, "The data interface isn't available\n");
 		return -EBUSY;
 	}
 
@@ -1042,8 +1089,8 @@ skip_normal_probe:
 	if (!usb_endpoint_dir_in(epread)) {
 		/* descriptors are swapped */
 		struct usb_endpoint_descriptor *t;
-		dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
-		
+		dev_dbg(&intf->dev,
+			"The data interface has switched endpoints\n");
 		t = epread;
 		epread = epwrite;
 		epwrite = t;
@@ -1056,13 +1103,15 @@ skip_normal_probe:
 		return -ENODEV;
 	}
 
-	if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
+	acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
+	if (acm == NULL) {
 		dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
 		goto alloc_fail;
 	}
 
 	ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
-	readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2);
+	readsize = le16_to_cpu(epread->wMaxPacketSize) *
+				(quirks == SINGLE_RX_URB ? 1 : 2);
 	acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
@@ -1082,6 +1131,8 @@ skip_normal_probe:
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+	tty_port_init(&acm->port);
+	acm->port.ops = &acm_port_ops;
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
@@ -1103,8 +1154,10 @@ skip_normal_probe:
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_ru *rcv = &(acm->ru[i]);
 
-		if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+		rcv->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (rcv->urb == NULL) {
+			dev_dbg(&intf->dev,
+				"out of memory (read urbs usb_alloc_urb)\n");
 			goto alloc_fail7;
 		}
 
@@ -1117,26 +1170,29 @@ skip_normal_probe:
 		rb->base = usb_buffer_alloc(acm->dev, readsize,
 				GFP_KERNEL, &rb->dma);
 		if (!rb->base) {
-			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+			dev_dbg(&intf->dev,
+				"out of memory (read bufs usb_buffer_alloc)\n");
 			goto alloc_fail7;
 		}
 	}
-	for(i = 0; i < ACM_NW; i++)
-	{
+	for (i = 0; i < ACM_NW; i++) {
 		struct acm_wb *snd = &(acm->wb[i]);
 
-		if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)");
+		snd->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (snd->urb == NULL) {
+			dev_dbg(&intf->dev,
+				"out of memory (write urbs usb_alloc_urb)");
 			goto alloc_fail7;
 		}
 
-		usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
-				NULL, acm->writesize, acm_write_bulk, snd);
+		usb_fill_bulk_urb(snd->urb, usb_dev,
+			usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+			NULL, acm->writesize, acm_write_bulk, snd);
 		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 		snd->instance = acm;
 	}
 
-	usb_set_intfdata (intf, acm);
+	usb_set_intfdata(intf, acm);
 
 	i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
 	if (i < 0)
@@ -1147,7 +1203,8 @@ skip_normal_probe:
 		if (!acm->country_codes)
 			goto skip_countries;
 		acm->country_code_size = cfd->bLength - 4;
-		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4);
+		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
+							cfd->bLength - 4);
 		acm->country_rel_date = cfd->iCountryCodeRelDate;
 
 		i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
@@ -1156,7 +1213,8 @@ skip_normal_probe:
 			goto skip_countries;
 		}
 
-		i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+		i = device_create_file(&intf->dev,
+						&dev_attr_iCountryCodeRelDate);
 		if (i < 0) {
 			kfree(acm->country_codes);
 			goto skip_countries;
@@ -1164,8 +1222,10 @@ skip_normal_probe:
 	}
 
 skip_countries:
-	usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
-			 acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
+	usb_fill_int_urb(acm->ctrlurb, usb_dev,
+			usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+			acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+			epctrl->bInterval);
 	acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	acm->ctrlurb->transfer_dma = acm->ctrl_dma;
 
@@ -1212,7 +1272,7 @@ static void stop_data_traffic(struct acm *acm)
 	tasklet_disable(&acm->urb_task);
 
 	usb_kill_urb(acm->ctrlurb);
-	for(i = 0; i < ACM_NW; i++)
+	for (i = 0; i < ACM_NW; i++)
 		usb_kill_urb(acm->wb[i].urb);
 	for (i = 0; i < acm->rx_buflimit; i++)
 		usb_kill_urb(acm->ru[i].urb);
@@ -1227,13 +1287,14 @@ static void acm_disconnect(struct usb_interface *intf)
 {
 	struct acm *acm = usb_get_intfdata(intf);
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct tty_struct *tty;
 
 	/* sibling interface is already cleaning up */
 	if (!acm)
 		return;
 
 	mutex_lock(&open_mutex);
-	if (acm->country_codes){
+	if (acm->country_codes) {
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
 		device_remove_file(&acm->control->dev,
@@ -1247,22 +1308,25 @@ static void acm_disconnect(struct usb_interface *intf)
 	stop_data_traffic(acm);
 
 	acm_write_buffers_free(acm);
-	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
+								acm->ctrl_dma);
 	acm_read_buffers_free(acm);
 
 	usb_driver_release_interface(&acm_driver, intf == acm->control ?
 					acm->data : acm->control);
 
-	if (!acm->used) {
+	if (acm->port.count == 0) {
 		acm_tty_unregister(acm);
 		mutex_unlock(&open_mutex);
 		return;
 	}
 
 	mutex_unlock(&open_mutex);
-
-	if (acm->tty)
-		tty_hangup(acm->tty);
+	tty = tty_port_tty_get(&acm->port);
+	if (tty) {
+		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
 }
 
 #ifdef CONFIG_PM
@@ -1297,7 +1361,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 	*/
 	mutex_lock(&acm->mutex);
 
-	if (acm->used)
+	if (acm->port.count)
 		stop_data_traffic(acm);
 
 	mutex_unlock(&acm->mutex);
@@ -1319,7 +1383,7 @@ static int acm_resume(struct usb_interface *intf)
 		return 0;
 
 	mutex_lock(&acm->mutex);
-	if (acm->used) {
+	if (acm->port.count) {
 		rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
 		if (rv < 0)
 			goto err_out;
@@ -1375,6 +1439,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
 	},
 	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
@@ -1395,7 +1462,7 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_GSM) },
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
-		USB_CDC_ACM_PROTO_AT_3G	) },
+		USB_CDC_ACM_PROTO_AT_3G) },
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_CDMA) },
 
@@ -1403,7 +1470,7 @@ static struct usb_device_id acm_ids[] = {
 	{ }
 };
 
-MODULE_DEVICE_TABLE (usb, acm_ids);
+MODULE_DEVICE_TABLE(usb, acm_ids);
 
 static struct usb_driver acm_driver = {
 	.name =		"cdc_acm",
@@ -1426,6 +1493,7 @@ static struct usb_driver acm_driver = {
 static const struct tty_operations acm_ops = {
 	.open =			acm_tty_open,
 	.close =		acm_tty_close,
+	.hangup =		acm_tty_hangup,
 	.write =		acm_tty_write,
 	.write_room =		acm_tty_write_room,
 	.ioctl =		acm_tty_ioctl,
@@ -1457,7 +1525,8 @@ static int __init acm_init(void)
 	acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
 	acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	acm_tty_driver->init_termios = tty_std_termios;
-	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
+								HUPCL | CLOCAL;
 	tty_set_operations(acm_tty_driver, &acm_ops);
 
 	retval = tty_register_driver(acm_tty_driver);
@@ -1489,7 +1558,7 @@ static void __exit acm_exit(void)
 module_init(acm_init);
 module_exit(acm_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1f95e7aa1b6..4c3856420ad 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -89,8 +89,8 @@ struct acm {
 	struct usb_device *dev;				/* the corresponding usb device */
 	struct usb_interface *control;			/* control interface */
 	struct usb_interface *data;			/* data interface */
-	struct tty_struct *tty;				/* the corresponding tty */
-	struct urb *ctrlurb;			/* urbs */
+	struct tty_port port;			 	/* our tty port data */
+	struct urb *ctrlurb;				/* urbs */
 	u8 *ctrl_buffer;				/* buffers of urbs */
 	dma_addr_t ctrl_dma;				/* dma handles of buffers */
 	u8 *country_codes;				/* country codes from device */
@@ -120,7 +120,6 @@ struct acm {
 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
 	unsigned int writesize;				/* max packet size for the output bulk endpoint */
 	unsigned int readsize,ctrlsize;			/* buffer sizes for freeing */
-	unsigned int used;				/* someone has this acm's device open */
 	unsigned int minor;				/* acm minor number */
 	unsigned char throttle;				/* throttled by tty layer */
 	unsigned char clocal;				/* termios CLOCAL */
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index dff5760a37f..ffe75e83787 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,6 +39,7 @@
 #include <linux/parser.h>
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <asm/byteorder.h>
 #include "usb.h"
 #include "hcd.h"
@@ -265,9 +266,13 @@ static int remount(struct super_block *sb, int *flags, char *data)
 		return -EINVAL;
 	}
 
+	lock_kernel();
+
 	if (usbfs_mount && usbfs_mount->mnt_sb)
 		update_sb(usbfs_mount->mnt_sb);
 
+	unlock_kernel();
+
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 563d5727544..05c913cc365 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	if (ep->desc) {
 		list_add_tail(&req->queue, &ep->queue);
 
-		if (ep->is_in || (ep_is_control(ep)
+		if ((!ep_is_control(ep) && ep->is_in) ||
+			(ep_is_control(ep)
 				&& (ep->state == DATA_STAGE_IN
 					|| ep->state == STATUS_STAGE_IN)))
 			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
@@ -1940,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 	clk_disable(pclk);
 
-	usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+	usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
 			  GFP_KERNEL);
 	if (!usba_ep)
 		goto err_alloc_ep;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index cd07ea3f0c6..15438469f21 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 	u32 reg_base, or_reg, skip_reg;
 	unsigned long flags;
 	struct ptd ptd;
+	packet_enqueue *pe;
 
 	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_ISOCHRONOUS:
@@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 		reg_base = INT_REGS_OFFSET;
 		or_reg = HC_INT_IRQ_MASK_OR_REG;
 		skip_reg = HC_INT_PTD_SKIPMAP_REG;
+		pe = enqueue_an_INT_packet;
 		break;
 
 	default:
@@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 		reg_base = ATL_REGS_OFFSET;
 		or_reg = HC_ATL_IRQ_MASK_OR_REG;
 		skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+		pe =  enqueue_an_ATL_packet;
 		break;
 	}
 
@@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 			u32 skip_map;
 			u32 or_map;
 			struct isp1760_qtd *qtd;
+			struct isp1760_qh *qh = ints->qh;
 
 			skip_map = isp1760_readl(hcd->regs + skip_reg);
 			skip_map |= 1 << i;
@@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 			priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
 					+ i * sizeof(ptd), sizeof(ptd));
 			qtd = ints->qtd;
-
-			clean_up_qtdlist(qtd);
+			qtd = clean_up_qtdlist(qtd);
 
 			free_mem(priv, ints->payload);
 
@@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 			ints->payload = 0;
 
 			isp1760_urb_done(priv, urb, status);
+			if (qtd)
+				pe(hcd, qh, qtd);
 			break;
+
+		} else if (ints->qtd) {
+			struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+
+			for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+				if (qtd->urb == urb) {
+					prev_qtd->hw_next = clean_up_qtdlist(qtd);
+					isp1760_urb_done(priv, urb, status);
+					break;
+				}
+				prev_qtd = qtd;
+			}
+			/* we found the urb before the end of the list */
+			if (qtd)
+				break;
 		}
 		ints++;
 	}
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 7cf74f8c2db..b0dbf4157d2 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 	struct usb_hcd *hcd;
 
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		dbg("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
 	}
 
@@ -65,12 +65,18 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (hcd->regs == NULL) {
-		pr_debug("ioremap failed");
+		dbg("ioremap failed");
 		retval = -ENOMEM;
 		goto err2;
 	}
 
-	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	usb_host_clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb_host_clock)) {
+		dbg("clk_get failed");
+		retval = PTR_ERR(usb_host_clock);
+		goto err3;
+	}
+
 	ep93xx_start_hc(&pdev->dev);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -80,6 +86,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 		return retval;
 
 	ep93xx_stop_hc(&pdev->dev);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index b7eacad4d48..2bfd6dd85b5 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -93,8 +93,7 @@ static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_shutdown(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios * old);
@@ -244,8 +243,7 @@ exit:
 } /* belkin_sa_open */
 
 
-static void belkin_sa_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ab4cc277aa6..2830766f5b3 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -262,32 +262,40 @@ error:	kfree(priv);
 	return r;
 }
 
-static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & CH341_BIT_DCD)
+		return 1;
+	return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
 
 	dbg("%s - port %d", __func__, port->number);
+	/* drop DTR and RTS */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+	else
+		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	ch341_set_handshake(port->serial->dev, priv->line_control);
+	wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
+	dbg("%s - port %d", __func__, port->number);
 
 	/* shutdown our urbs */
 	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
-
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			ch341_set_handshake(port->serial->dev, 0);
-		}
-	}
-	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
 
@@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("ch341_open()");
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
@@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (r) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, r);
-		ch341_close(tty, port, NULL);
+		ch341_close(port);
 		return -EPROTO;
 	}
 
@@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	dbg("ch341_set_termios()");
 
-	if (!tty || !tty->termios)
-		return;
-
 	baud_rate = tty_get_baud_rate(tty);
 
 	priv->baud_rate = baud_rate;
@@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = {
 	.usb_driver        = &ch341_driver,
 	.num_ports         = 1,
 	.open              = ch341_open,
+	.dtr_rts	   = ch341_dtr_rts,
+	.carrier_raised	   = ch341_carrier_raised,
 	.close             = ch341_close,
 	.ioctl             = ch341_ioctl,
 	.set_termios       = ch341_set_termios,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 19e24045b13..247b61bfb7f 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree(tty);
 		}
 	}
-
+	/* So we know not to kill the hardware on a hangup on this
+	   port. We have also bumped the use count by one so it won't go
+	   idle */
 	port->console = 1;
 	retval = 0;
 
@@ -182,7 +184,7 @@ free_tty:
 	kfree(tty);
 reset_open_count:
 	port->port.count = 0;
-goto out;
+	goto out;
 }
 
 static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e8d5133ce9c..16a154d3b2f 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1,5 +1,5 @@
 /*
- * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
  *
  * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
  *
@@ -27,44 +27,46 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.08"
-#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
+#define DRIVER_VERSION "v0.09"
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
 
 /*
  * Function Prototypes
  */
-static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
 							struct file *);
-static void cp2101_cleanup(struct usb_serial_port *);
-static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
-							struct file*);
-static void cp2101_get_termios(struct tty_struct *,
+static void cp210x_cleanup(struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
-static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
-static int cp2101_tiocmget(struct tty_struct *, struct file *);
-static int cp2101_tiocmset(struct tty_struct *, struct file *,
+static int cp210x_tiocmget(struct tty_struct *, struct file *);
+static int cp210x_tiocmset(struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 		unsigned int, unsigned int);
-static void cp2101_break_ctl(struct tty_struct *, int);
-static int cp2101_startup(struct usb_serial *);
-static void cp2101_shutdown(struct usb_serial *);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_shutdown(struct usb_serial *);
 
 static int debug;
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -85,10 +87,12 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
@@ -99,7 +103,9 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
 	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
 	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
@@ -108,53 +114,70 @@ static struct usb_device_id id_table [] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver cp2101_driver = {
-	.name		= "cp2101",
+static struct usb_driver cp210x_driver = {
+	.name		= "cp210x",
 	.probe		= usb_serial_probe,
 	.disconnect	= usb_serial_disconnect,
 	.id_table	= id_table,
 	.no_dynamic_id	= 	1,
 };
 
-static struct usb_serial_driver cp2101_device = {
+static struct usb_serial_driver cp210x_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name = 	"cp2101",
+		.name = 	"cp210x",
 	},
-	.usb_driver		= &cp2101_driver,
+	.usb_driver		= &cp210x_driver,
 	.id_table		= id_table,
 	.num_ports		= 1,
-	.open			= cp2101_open,
-	.close			= cp2101_close,
-	.break_ctl		= cp2101_break_ctl,
-	.set_termios		= cp2101_set_termios,
-	.tiocmget 		= cp2101_tiocmget,
-	.tiocmset		= cp2101_tiocmset,
-	.attach			= cp2101_startup,
-	.shutdown		= cp2101_shutdown,
+	.open			= cp210x_open,
+	.close			= cp210x_close,
+	.break_ctl		= cp210x_break_ctl,
+	.set_termios		= cp210x_set_termios,
+	.tiocmget 		= cp210x_tiocmget,
+	.tiocmset		= cp210x_tiocmset,
+	.attach			= cp210x_startup,
+	.shutdown		= cp210x_shutdown,
 };
 
 /* Config request types */
 #define REQTYPE_HOST_TO_DEVICE	0x41
 #define REQTYPE_DEVICE_TO_HOST	0xc1
 
-/* Config SET requests. To GET, add 1 to the request number */
-#define CP2101_UART 		0x00	/* Enable / Disable */
-#define CP2101_BAUDRATE		0x01	/* (BAUD_RATE_GEN_FREQ / baudrate) */
-#define CP2101_BITS		0x03	/* 0x(0)(databits)(parity)(stopbits) */
-#define CP2101_BREAK		0x05	/* On / Off */
-#define CP2101_CONTROL		0x07	/* Flow control line states */
-#define CP2101_MODEMCTL		0x13	/* Modem controls */
-#define CP2101_CONFIG_6		0x19	/* 6 bytes of config data ??? */
-
-/* CP2101_UART */
+/* Config request codes */
+#define CP210X_IFC_ENABLE	0x00
+#define CP210X_SET_BAUDDIV	0x01
+#define CP210X_GET_BAUDDIV	0x02
+#define CP210X_SET_LINE_CTL	0x03
+#define CP210X_GET_LINE_CTL	0x04
+#define CP210X_SET_BREAK	0x05
+#define CP210X_IMM_CHAR		0x06
+#define CP210X_SET_MHS		0x07
+#define CP210X_GET_MDMSTS	0x08
+#define CP210X_SET_XON		0x09
+#define CP210X_SET_XOFF		0x0A
+#define CP210X_SET_EVENTMASK	0x0B
+#define CP210X_GET_EVENTMASK	0x0C
+#define CP210X_SET_CHAR		0x0D
+#define CP210X_GET_CHARS	0x0E
+#define CP210X_GET_PROPS	0x0F
+#define CP210X_GET_COMM_STATUS	0x10
+#define CP210X_RESET		0x11
+#define CP210X_PURGE		0x12
+#define CP210X_SET_FLOW		0x13
+#define CP210X_GET_FLOW		0x14
+#define CP210X_EMBED_EVENTS	0x15
+#define CP210X_GET_EVENTSTATE	0x16
+#define CP210X_SET_CHARS	0x19
+
+/* CP210X_IFC_ENABLE */
 #define UART_ENABLE		0x0001
 #define UART_DISABLE		0x0000
 
-/* CP2101_BAUDRATE */
+/* CP210X_(SET|GET)_BAUDDIV */
 #define BAUD_RATE_GEN_FREQ	0x384000
 
-/* CP2101_BITS */
+/* CP210X_(SET|GET)_LINE_CTL */
 #define BITS_DATA_MASK		0X0f00
 #define BITS_DATA_5		0X0500
 #define BITS_DATA_6		0X0600
@@ -174,11 +197,11 @@ static struct usb_serial_driver cp2101_device = {
 #define BITS_STOP_1_5		0x0001
 #define BITS_STOP_2		0x0002
 
-/* CP2101_BREAK */
+/* CP210X_SET_BREAK */
 #define BREAK_ON		0x0000
 #define BREAK_OFF		0x0001
 
-/* CP2101_CONTROL */
+/* CP210X_(SET_MHS|GET_MDMSTS) */
 #define CONTROL_DTR		0x0001
 #define CONTROL_RTS		0x0002
 #define CONTROL_CTS		0x0010
@@ -189,13 +212,13 @@ static struct usb_serial_driver cp2101_device = {
 #define CONTROL_WRITE_RTS	0x0200
 
 /*
- * cp2101_get_config
- * Reads from the CP2101 configuration registers
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
  * 'size' is specified in bytes.
  * 'data' is a pointer to a pre-allocated array of integers large
  * enough to hold 'size' bytes (with 4 bytes to each integer)
  */
-static int cp2101_get_config(struct usb_serial_port *port, u8 request,
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -211,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 		return -ENOMEM;
 	}
 
-	/* For get requests, the request number must be incremented */
-	request++;
-
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
@@ -236,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 }
 
 /*
- * cp2101_set_config
- * Writes to the CP2101 configuration registers
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
  * Values less than 16 bits wide are sent directly
  * 'size' is specified in bytes.
  */
-static int cp2101_set_config(struct usb_serial_port *port, u8 request,
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -292,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 }
 
 /*
- * cp2101_set_config_single
- * Convenience function for calling cp2101_set_config on single data values
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
  * without requiring an integer pointer
  */
-static inline int cp2101_set_config_single(struct usb_serial_port *port,
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
 		u8 request, unsigned int data)
 {
-	return cp2101_set_config(port, request, &data, 2);
+	return cp210x_set_config(port, request, &data, 2);
 }
 
 /*
- * cp2101_quantise_baudrate
+ * cp210x_quantise_baudrate
  * Quantises the baud rate as per AN205 Table 1
  */
-static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	if      (baud <= 56)       baud = 0;
 	else if (baud <= 300)      baud = 300;
 	else if (baud <= 600)      baud = 600;
@@ -343,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
 	return baud;
 }
 
-static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -351,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
+	if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n",
 				__func__);
 		return -EPROTO;
@@ -373,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* Configure the termios structure */
-	cp2101_get_termios(tty, port);
+	cp210x_get_termios(tty, port);
 
 	/* Set the DTR and RTS pins low */
-	cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+	cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
 			: port,
 		NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
 	return 0;
 }
 
-static void cp2101_cleanup(struct usb_serial_port *port)
+static void cp210x_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
@@ -398,8 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port)
 	}
 }
 
-static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static void cp210x_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -410,23 +429,23 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected)
-		cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+		cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
 /*
- * cp2101_get_termios
+ * cp210x_get_termios
  * Reads the baud rate, data bits, parity, stop bits and flow control mode
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios(struct tty_struct *tty,
+static void cp210x_get_termios(struct tty_struct *tty,
 	struct usb_serial_port *port)
 {
 	unsigned int baud;
 
 	if (tty) {
-		cp2101_get_termios_port(tty->driver_data,
+		cp210x_get_termios_port(tty->driver_data,
 			&tty->termios->c_cflag, &baud);
 		tty_encode_baud_rate(tty, baud, baud);
 	}
@@ -434,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty,
 	else {
 		unsigned int cflag;
 		cflag = 0;
-		cp2101_get_termios_port(port, &cflag, &baud);
+		cp210x_get_termios_port(port, &cflag, &baud);
 	}
 }
 
 /*
- * cp2101_get_termios_port
- * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ * cp210x_get_termios_port
+ * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
  */
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp)
 {
 	unsigned int cflag, modem_ctl[4];
@@ -451,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+	cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
 	/* Convert to baudrate */
 	if (baud)
-		baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+		baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
 
 	dbg("%s - baud rate = %d", __func__, baud);
 	*baudp = baud;
 
 	cflag = *cflagp;
 
-	cp2101_get_config(port, CP2101_BITS, &bits, 2);
+	cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 	cflag &= ~CSIZE;
 	switch (bits & BITS_DATA_MASK) {
 	case BITS_DATA_5:
@@ -486,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	default:
 		dbg("%s - Unknown number of data bits, using 8", __func__);
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
@@ -516,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 				__func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	case BITS_PARITY_SPACE:
 		dbg("%s - parity = SPACE (not supported, disabling parity)",
 				__func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	default:
 		dbg("%s - Unknown parity mode, disabling parity", __func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
@@ -542,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
 								__func__);
 		bits &= ~BITS_STOP_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	case BITS_STOP_2:
 		dbg("%s - stop bits = 2", __func__);
@@ -552,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		dbg("%s - Unknown number of stop bits, using 1 stop bit",
 								__func__);
 		bits &= ~BITS_STOP_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
-	cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 	if (modem_ctl[0] & 0x0008) {
 		dbg("%s - flow control = CRTSCTS", __func__);
 		cflag |= CRTSCTS;
@@ -568,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 	*cflagp = cflag;
 }
 
-static void cp2101_set_termios(struct tty_struct *tty,
+static void cp210x_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
@@ -583,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 	tty->termios->c_cflag &= ~CMSPAR;
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
+	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
 
 	/* If the baud rate is to be updated*/
 	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
 		dbg("%s - Setting baud rate to %d baud", __func__,
 				baud);
-		if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
 					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
 			dbg("Baud rate requested not supported by device\n");
 			baud = tty_termios_baud_rate(old_termios);
@@ -600,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
 		case CS5:
@@ -624,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			dbg("%s - data bits = 9", __func__);
 			break;*/
 		default:
-			dbg("cp2101 driver does not "
+			dbg("cp210x driver does not "
 					"support the number of bits requested,"
 					" using 8 bit mode\n");
 				bits |= BITS_DATA_8;
 				break;
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of data bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
 			if (cflag & PARODD) {
@@ -647,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 				dbg("%s - parity = EVEN", __func__);
 			}
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Parity mode not supported "
 					"by device\n");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_STOP_MASK;
 		if (cflag & CSTOPB) {
 			bits |= BITS_STOP_2;
@@ -662,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			bits |= BITS_STOP_1;
 			dbg("%s - stop bits = 1", __func__);
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of stop bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
-		cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 		dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 				__func__, modem_ctl[0], modem_ctl[1],
 				modem_ctl[2], modem_ctl[3]);
@@ -688,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
 		dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 				__func__, modem_ctl[0], modem_ctl[1],
 				modem_ctl[2], modem_ctl[3]);
-		cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
 	}
 
 }
 
-static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	return cp2101_tiocmset_port(port, file, set, clear);
+	return cp210x_tiocmset_port(port, file, set, clear);
 }
 
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	unsigned int control = 0;
@@ -726,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
 
 	dbg("%s - control = 0x%.4x", __func__, control);
 
-	return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+	return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
 }
 
-static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control;
@@ -737,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -751,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int state;
@@ -763,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __func__,
 			state == BREAK_OFF ? "off" : "on");
-	cp2101_set_config(port, CP2101_BREAK, &state, 2);
+	cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
 }
 
-static int cp2101_startup(struct usb_serial *serial)
+static int cp210x_startup(struct usb_serial *serial)
 {
-	/* CP2101 buffers behave strangely unless device is reset */
+	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 	return 0;
 }
 
-static void cp2101_shutdown(struct usb_serial *serial)
+static void cp210x_shutdown(struct usb_serial *serial)
 {
 	int i;
 
@@ -781,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial)
 
 	/* Stop reads and writes on all ports */
 	for (i = 0; i < serial->num_ports; ++i)
-		cp2101_cleanup(serial->port[i]);
+		cp210x_cleanup(serial->port[i]);
 }
 
-static int __init cp2101_init(void)
+static int __init cp210x_init(void)
 {
 	int retval;
 
-	retval = usb_serial_register(&cp2101_device);
+	retval = usb_serial_register(&cp210x_device);
 	if (retval)
 		return retval; /* Failed to register */
 
-	retval = usb_register(&cp2101_driver);
+	retval = usb_register(&cp210x_driver);
 	if (retval) {
 		/* Failed to register */
-		usb_serial_deregister(&cp2101_device);
+		usb_serial_deregister(&cp210x_device);
 		return retval;
 	}
 
@@ -805,14 +824,14 @@ static int __init cp2101_init(void)
 	return 0;
 }
 
-static void __exit cp2101_exit(void)
+static void __exit cp210x_exit(void)
 {
-	usb_deregister(&cp2101_driver);
-	usb_serial_deregister(&cp2101_device);
+	usb_deregister(&cp210x_driver);
+	usb_serial_deregister(&cp210x_device);
 }
 
-module_init(cp2101_init);
-module_exit(cp2101_exit);
+module_init(cp210x_init);
+module_exit(cp210x_exit);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index dd501bb63ed..933ba913e66 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_shutdown(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 static int cyberjack_write_room(struct tty_struct *tty);
@@ -185,8 +184,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 	return result;
 }
 
-static void cyberjack_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e568710b263..669f9384853 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -174,8 +174,8 @@ static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_shutdown(struct usb_serial *serial);
 static int  cypress_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct usb_serial_port *port);
+static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static void cypress_send(struct usb_serial_port *port);
@@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty,
 	priv->rx_flags = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* raise both lines and set termios */
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->line_control = CONTROL_DTR | CONTROL_RTS;
-	priv->cmd_ctrl = 1;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	/* Set termios */
 	result = cypress_write(tty, port, NULL, 0);
 
 	if (result) {
@@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty,
 							__func__, result);
 		cypress_set_dead(port);
 	}
-
+	port->port.drain_delay = 256;
 	return result;
 } /* cypress_open */
 
+static void cypress_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	/* drop dtr and rts */
+	priv = usb_get_serial_port_data(port);
+	spin_lock_irq(&priv->lock);
+	if (on == 0)
+		priv->line_control = 0;
+	else 
+		priv->line_control = CONTROL_DTR | CONTROL_RTS;
+	priv->cmd_ctrl = 1;
+	spin_unlock_irq(&priv->lock);
+	cypress_write(NULL, port, NULL, 0);
+}
 
-static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void cypress_close(struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from buffer */
-	spin_lock_irq(&priv->lock);
-	timeout = CYPRESS_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (cypress_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		/* without mutex, allowed due to harmless failure mode */
-		|| port->serial->disconnected)
-			break;
-		spin_unlock_irq(&priv->lock);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irq(&priv->lock);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	/* clear out any remaining data in the buffer */
-	cypress_buf_clear(priv->buf);
-	spin_unlock_irq(&priv->lock);
-
 	/* writing is potentially harmful, lock must be taken */
 	mutex_lock(&port->serial->disc_mutex);
 	if (port->serial->disconnected) {
 		mutex_unlock(&port->serial->disc_mutex);
 		return;
 	}
-	/* wait for characters to drain from device */
-	if (tty) {
-		bps = tty_get_baud_rate(tty);
-		if (bps > 1200)
-			timeout = max((HZ * 2560) / bps, HZ / 10);
-		else
-			timeout = 2 * HZ;
-		schedule_timeout_interruptible(timeout);
-	}
-
+	cypress_buf_clear(priv->buf);
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_out_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop dtr and rts */
-			priv = usb_get_serial_port_data(port);
-			spin_lock_irq(&priv->lock);
-			priv->line_control = 0;
-			priv->cmd_ctrl = 1;
-			spin_unlock_irq(&priv->lock);
-			cypress_write(tty, port, NULL, 0);
-		}
-	}
 
 	if (stats)
 		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 38ba4ea8b6b..30f5140eff0 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -422,7 +422,6 @@ struct digi_port {
 	int dp_throttled;
 	int dp_throttle_restart;
 	wait_queue_head_t dp_flush_wait;
-	int dp_in_close;			/* close in progress */
 	wait_queue_head_t dp_close_wait;	/* wait queue for close */
 	struct work_struct dp_wakeup_work;
 	struct usb_serial_port *dp_port;
@@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	struct file *filp);
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static void digi_close(struct usb_serial_port *port);
+static int digi_carrier_raised(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
 static void digi_shutdown(struct usb_serial *serial);
@@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.num_ports =			3,
 	.open =				digi_open,
 	.close =			digi_close,
+	.dtr_rts =			digi_dtr_rts,
+	.carrier_raised =		digi_carrier_raised,
 	.write =			digi_write,
 	.write_room =			digi_write_room,
 	.write_bulk_callback = 		digi_write_bulk_callback,
@@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty)
 
 }
 
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	/* Adjust DTR and RTS */
+	digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
+}
+
+static int digi_carrier_raised(struct usb_serial_port *port)
+{
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	if (priv->dp_modem_signals & TIOCM_CD)
+		return 1;
+	return 0;
+}
 
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
@@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	unsigned char buf[32];
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	struct ktermios not_termios;
-	unsigned long flags = 0;
 
 	dbg("digi_open: TOP: port=%d, open_count=%d",
 		priv->dp_port_num, port->port.count);
@@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (digi_startup_device(port->serial) != 0)
 		return -ENXIO;
 
-	spin_lock_irqsave(&priv->dp_port_lock, flags);
-
-	/* don't wait on a close in progress for non-blocking opens */
-	if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
-		spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-		return -EAGAIN;
-	}
-
-	/* wait for a close in progress to finish */
-	while (priv->dp_in_close) {
-		cond_wait_interruptible_timeout_irqrestore(
-			&priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
-			&priv->dp_port_lock, flags);
-		if (signal_pending(current))
-			return -EINTR;
-		spin_lock_irqsave(&priv->dp_port_lock, flags);
-	}
-
-	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-
 	/* read modem signals automatically whenever they change */
 	buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
 	buf[1] = priv->dp_port_num;
@@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 		not_termios.c_iflag = ~tty->termios->c_iflag;
 		digi_set_termios(tty, port, &not_termios);
 	}
-
-	/* set DTR and RTS */
-	digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
-
 	return 0;
 }
 
 
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static void digi_close(struct usb_serial_port *port)
 {
 	DEFINE_WAIT(wait);
 	int ret;
@@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 	if (port->serial->disconnected)
 		goto exit;
 
-	/* do cleanup only after final close on this port */
-	spin_lock_irq(&priv->dp_port_lock);
-	priv->dp_in_close = 1;
-	spin_unlock_irq(&priv->dp_port_lock);
-
-	/* tell line discipline to process only XON/XOFF */
-	tty->closing = 1;
-
-	/* wait for output to drain */
-	if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
-		tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT);
-
-	/* flush driver and line discipline buffers */
-	tty_driver_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-
 	if (port->serial->dev) {
-		/* wait for transmit idle */
-		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
-			digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-		/* drop DTR and RTS */
-		digi_set_modem_signals(port, 0, 0);
+		/* FIXME: Transmit idle belongs in the wait_unti_sent path */
+		digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
 
 		/* disable input flow control */
 		buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
@@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 		/* shutdown any outstanding bulk writes */
 		usb_kill_urb(port->write_urb);
 	}
-	tty->closing = 0;
 exit:
 	spin_lock_irq(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	priv->dp_in_close = 0;
 	wake_up_interruptible(&priv->dp_close_wait);
 	spin_unlock_irq(&priv->dp_port_lock);
 	mutex_unlock(&port->serial->disc_mutex);
@@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial)
 		priv->dp_throttled = 0;
 		priv->dp_throttle_restart = 0;
 		init_waitqueue_head(&priv->dp_flush_wait);
-		priv->dp_in_close = 0;
 		init_waitqueue_head(&priv->dp_close_wait);
 		INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
 		priv->dp_port = serial->port[i];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index c709ec474a8..2b141ccb0cd 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -81,8 +81,7 @@ static int debug;
 /* function prototypes for an empeg-car player */
 static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 						struct file *filp);
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
 						int count);
@@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 }
 
 
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static void empeg_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0ab8474b00c..683304d6061 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -89,6 +89,7 @@ struct ftdi_private {
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always
 				   be enabled */
 
+	unsigned int latency;		/* latency setting in use */
 	spinlock_t tx_lock;	/* spinlock for transmit state */
 	unsigned long tx_bytes;
 	unsigned long tx_outstanding_bytes;
@@ -719,8 +720,8 @@ static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static int  ftdi_write_room(struct tty_struct *tty);
@@ -758,6 +759,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.port_remove =		ftdi_sio_port_remove,
 	.open =			ftdi_open,
 	.close =		ftdi_close,
+	.dtr_rts =		ftdi_dtr_rts,
 	.throttle =		ftdi_throttle,
 	.unthrottle =		ftdi_unthrottle,
 	.write =		ftdi_write,
@@ -1037,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 	return rv;
 }
 
+static int write_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	char buf[1];
+	int rv = 0;
+	int l = priv->latency;
+
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		l = 1;
+
+	dbg("%s: setting latency timer = %i", __func__, l);
+
+	rv = usb_control_msg(udev,
+			     usb_sndctrlpipe(udev, 0),
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+			     l, priv->interface,
+			     buf, 0, WDR_TIMEOUT);
+
+	if (rv < 0)
+		dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+	return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	unsigned short latency = 0;
+	int rv = 0;
+
+
+	dbg("%s", __func__);
 
+	rv = usb_control_msg(udev,
+			     usb_rcvctrlpipe(udev, 0),
+			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+			     0, priv->interface,
+			     (char *) &latency, 1, WDR_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+		return -EIO;
+	}
+	return latency;
+}
 
 static int get_serial_info(struct usb_serial_port *port,
 				struct serial_struct __user *retinfo)
@@ -1097,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty,
 	priv->custom_divisor = new_serial.custom_divisor;
 
 	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	write_latency_timer(port);
 
 check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
@@ -1192,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev,
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct usb_device *udev = port->serial->dev;
-	unsigned short latency = 0;
-	int rv = 0;
-
-
-	dbg("%s", __func__);
-
-	rv = usb_control_msg(udev,
-			     usb_rcvctrlpipe(udev, 0),
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
-			     0, priv->interface,
-			     (char *) &latency, 1, WDR_TIMEOUT);
-
-	if (rv < 0) {
-		dev_err(dev, "Unable to read latency timer: %i\n", rv);
-		return -EIO;
-	}
-	return sprintf(buf, "%i\n", latency);
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "%i\n", priv->latency);
 }
 
+
 /* Write a new value of the latency timer, in units of milliseconds. */
 static ssize_t store_latency_timer(struct device *dev,
 			struct device_attribute *attr, const char *valbuf,
@@ -1220,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev,
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct usb_device *udev = port->serial->dev;
-	char buf[1];
 	int v = simple_strtoul(valbuf, NULL, 10);
 	int rv = 0;
 
-	dbg("%s: setting latency timer = %i", __func__, v);
-
-	rv = usb_control_msg(udev,
-			     usb_sndctrlpipe(udev, 0),
-			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
-			     v, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
-	if (rv < 0) {
-		dev_err(dev, "Unable to write latency timer: %i\n", rv);
+	priv->latency = v;
+	rv = write_latency_timer(port);
+	if (rv < 0)
 		return -EIO;
-	}
-
 	return count;
 }
 
@@ -1392,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	usb_set_serial_port_data(port, priv);
 
 	ftdi_determine_type(port);
+	read_latency_timer(port);
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1487,14 +1512,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	remove_sysfs_attrs(port);
 
-	/* all open ports are closed at this point
-	 *    (by usbserial.c:__serial_close, which calls ftdi_close)
-	 */
-
-	if (priv) {
-		usb_set_serial_port_data(port, NULL);
-		kref_put(&priv->kref, ftdi_sio_priv_release);
-	}
+	kref_put(&priv->kref, ftdi_sio_priv_release);
 
 	return 0;
 }
@@ -1521,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty,
 	if (tty)
 		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
+	write_latency_timer(port);
+
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
 	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1536,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty,
 	if (tty)
 		ftdi_set_termios(tty, port, tty->termios);
 
-	/* FIXME: Flow control might be enabled, so it should be checked -
-	   we have no control of defaults! */
-	/* Turn on RTS and DTR since we are not flow controlling by default */
-	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
 	/* Not throttled */
 	spin_lock_irqsave(&priv->rx_lock, flags);
 	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
@@ -1565,6 +1580,30 @@ static int ftdi_open(struct tty_struct *tty,
 } /* ftdi_open */
 
 
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char buf[1];
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* Disable flow control */
+		if (!on && usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+			    0, priv->interface, buf, 0,
+			    WDR_TIMEOUT) < 0) {
+			    dev_err(&port->dev, "error from flowcontrol urb\n");
+		}
+		/* drop RTS and DTR */
+		if (on)
+			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+		else
+			clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
 
 /*
  * usbserial:__serial_close  only calls ftdi_close if the point is open
@@ -1574,31 +1613,12 @@ static int ftdi_open(struct tty_struct *tty,
  *
  */
 
-static void ftdi_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
 { /* ftdi_close */
-	unsigned int c_cflag = tty->termios->c_cflag;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char buf[1];
 
 	dbg("%s", __func__);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (c_cflag & HUPCL && !port->serial->disconnected) {
-		/* Disable flow control */
-		if (usb_control_msg(port->serial->dev,
-				    usb_sndctrlpipe(port->serial->dev, 0),
-				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
-				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-				    0, priv->interface, buf, 0,
-				    WDR_TIMEOUT) < 0) {
-			dev_err(&port->dev, "error from flowcontrol urb\n");
-		}
-
-		/* drop RTS and DTR */
-		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-	} /* Note change no line if hupcl is off */
-	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
 	cancel_delayed_work_sync(&priv->rx_work);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 586d30ff450..ee25a3fe3b0 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty,
 }
 
 
-static void garmin_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void garmin_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4cec9906ccf..be82ea95672 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
 
-void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+void usb_serial_generic_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup(port);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index fb4a73d090f..53ef5996e33 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb);
 /* function prototypes for the usbserial callbacks */
 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filp);
-static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static int edge_write_room(struct tty_struct *tty);
@@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty,
 
 	if (!edge_port->txfifo.fifo) {
 		dbg("%s - no memory", __func__);
-		edge_close(tty, port, filp);
+		edge_close(port);
 		return -ENOMEM;
 	}
 
@@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty,
 
 	if (!edge_port->write_urb) {
 		dbg("%s - no memory", __func__);
-		edge_close(tty, port, filp);
+		edge_close(port);
 		return -ENOMEM;
 	}
 
@@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port)
  * edge_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 513b25e044c..db964db42d3 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -102,7 +102,7 @@ struct edgeport_port {
 	__u8 shadow_mcr;
 	__u8 shadow_lsr;
 	__u8 lsr_mask;
-	__u32 ump_read_timeout;		/* Number of miliseconds the UMP will
+	__u32 ump_read_timeout;		/* Number of milliseconds the UMP will
 					   wait without data before completing
 					   a read short */
 	int baud_rate;
@@ -2009,8 +2009,7 @@ release_es_lock:
 	return status;
 }
 
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd62825a9ac..c610a99fa47 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -76,8 +76,7 @@ static int initial_wait;
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void ipaq_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
@@ -714,8 +713,7 @@ error:
 }
 
 
-static void ipaq_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct usb_serial_port *port)
 {
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index da2a2b46644..29ad038b9c8 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty,
 	return 0;
 }
 
-static void ipw_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_device *dev = port->serial->dev;
 	int result;
 
-	if (tty_hung_up_p(filp)) {
-		dbg("%s: tty_hung_up_p ...", __func__);
-		return;
-	}
-
 	/*--1: drop the dtr */
 	dbg("%s:dropping dtr", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN,
 			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_CLRDTR,
+			 on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
 			 0,
 			 NULL,
 			 0,
@@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty,
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
 			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_CLRRTS,
+			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
 			 0,
 			 NULL,
 			 0,
@@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty,
 	if (result < 0)
 		dev_err(&port->dev,
 				"dropping rts failed (error = %d)\n", result);
+}
 
+static void ipw_close(struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	int result;
 
 	/*--3: purge */
 	dbg("%s:sending purge", __func__);
@@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = {
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,
+	.dtr_rts =		ipw_dtr_rts,
 	.port_probe = 		ipw_probe,
 	.port_remove =		ipw_disconnect,
 	.write =		ipw_write,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4e2cda93da5..66009b6b763 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -88,8 +88,7 @@ static int xbof = -1;
 static int  ir_startup (struct usb_serial *serial);
 static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filep);
-static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static void ir_write_bulk_callback (struct urb *urb);
@@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty,
 	return result;
 }
 
-static void ir_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+static void ir_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 4473d442b2a..76a3cc327bb 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -40,7 +40,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.10"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
 static struct usb_device_id id_table[] = {
@@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb);
 struct iuu_private {
 	spinlock_t lock;	/* store irq state */
 	wait_queue_head_t delta_msr_wait;
-	u8 line_control;
 	u8 line_status;
 	u8 termios_initialized;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
@@ -651,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port)
 	unsigned long flags;
 	int result;
 	int i;
+	int buf_len;
 	char *buf_ptr = port->write_urb->transfer_buffer;
 	dbg("%s - enter", __func__);
 
+	spin_lock_irqsave(&priv->lock, flags);
 	*buf_ptr++ = IUU_UART_ESC;
 	*buf_ptr++ = IUU_UART_TX;
 	*buf_ptr++ = priv->writelen;
 
-	memcpy(buf_ptr, priv->writebuf,
-	       priv->writelen);
+	memcpy(buf_ptr, priv->writebuf, priv->writelen);
+	buf_len = priv->writelen;
+	priv->writelen = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
 	if (debug == 1) {
-		for (i = 0; i < priv->writelen; i++)
+		for (i = 0; i < buf_len; i++)
 			sprintf(priv->dbgbuf + i*2 ,
 				"%02X", priv->writebuf[i]);
-		priv->dbgbuf[priv->writelen+i*2] = 0;
+		priv->dbgbuf[buf_len+i*2] = 0;
 		dbg("%s - writing %i chars : %s", __func__,
-		    priv->writelen, priv->dbgbuf);
+		    buf_len, priv->dbgbuf);
 	}
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			  usb_sndbulkpipe(port->serial->dev,
 					  port->bulk_out_endpointAddress),
-			  port->write_urb->transfer_buffer, priv->writelen + 3,
+			  port->write_urb->transfer_buffer, buf_len + 3,
 			  iuu_rxcmd, port);
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->writelen = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
 	usb_serial_port_softint(port);
 	return result;
 }
@@ -770,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->writelen > 0) {
-		/* buffer already filled but not commited */
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return 0;
-	}
+
 	/* fill the buffer */
-	memcpy(priv->writebuf, buf, count);
-	priv->writelen = count;
+	memcpy(priv->writebuf + priv->writelen, buf, count);
+	priv->writelen += count;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return count;
@@ -819,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port)
 	buf[0] = IUU_UART_ENABLE;
 	buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
 	buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
-	buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN);
+	buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
 
 	status = bulk_immediate(port, buf, 4);
 	if (status != IUU_OPERATION_OK) {
@@ -946,19 +942,59 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
 	return status;
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
+static void iuu_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	return 0;
+	const u32 supported_mask = CMSPAR|PARENB|PARODD;
+
+	unsigned int cflag = tty->termios->c_cflag;
+	int status;
+	u32 actual;
+	u32 parity;
+	int csize = CS7;
+	int baud = 9600;	/* Fixed for the moment */
+	u32 newval = cflag & supported_mask;
+
+	/* compute the parity parameter */
+	parity = 0;
+	if (cflag & CMSPAR) {	/* Using mark space */
+		if (cflag & PARODD)
+			parity |= IUU_PARITY_SPACE;
+		else
+			parity |= IUU_PARITY_MARK;
+	} else if (!(cflag & PARENB)) {
+		parity |= IUU_PARITY_NONE;
+		csize = CS8;
+	} else if (cflag & PARODD)
+		parity |= IUU_PARITY_ODD;
+	else
+		parity |= IUU_PARITY_EVEN;
+
+	parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
+
+	/* set it */
+	status = iuu_uart_baud(port,
+			(clockmode == 2) ? 16457 : 9600 * boost / 100,
+			&actual, parity);
+
+	/* set the termios value to the real one, so the user now what has
+	 * changed. We support few fields so its easies to copy the old hw
+	 * settings back over and then adjust them
+	 */
+ 	if (old_termios)
+ 		tty_termios_copy_hw(tty->termios, old_termios);
+	if (status != 0)	/* Set failed - return old bits */
+		return;
+	/* Re-encode speed, parity and csize */
+	tty_encode_baud_rate(tty, baud, baud);
+	tty->termios->c_cflag &= ~(supported_mask|CSIZE);
+	tty->termios->c_cflag |= newval | csize;
 }
 
-static void iuu_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct usb_serial_port *port)
 {
 	/* iuu_led (port,255,0,0,0); */
 	struct usb_serial *serial;
-	struct iuu_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	unsigned int c_cflag;
 
 	serial = port->serial;
 	if (!serial)
@@ -968,17 +1004,6 @@ static void iuu_close(struct tty_struct *tty,
 
 	iuu_uart_off(port);
 	if (serial->dev) {
-		if (tty) {
-			c_cflag = tty->termios->c_cflag;
-			if (c_cflag & HUPCL) {
-				/* drop DTR and RTS */
-				priv = usb_get_serial_port_data(port);
-				spin_lock_irqsave(&priv->lock, flags);
-				priv->line_control = 0;
-				spin_unlock_irqrestore(&priv->lock, flags);
-				set_control_lines(port->serial->dev, 0);
-			}
-		}
 		/* free writebuf */
 		/* shutdown our urbs */
 		dbg("%s - shutting down urbs", __func__);
@@ -1154,7 +1179,7 @@ static int iuu_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		iuu_close(tty, port, NULL);
+		iuu_close(port);
 		return -EPROTO;
 	} else {
 		dbg("%s - rxcmd OK", __func__);
@@ -1175,6 +1200,7 @@ static struct usb_serial_driver iuu_device = {
 	.read_bulk_callback = iuu_uart_read_callback,
 	.tiocmget = iuu_tiocmget,
 	.tiocmset = iuu_tiocmset,
+	.set_termios = iuu_set_termios,
 	.attach = iuu_startup,
 	.shutdown = iuu_shutdown,
 };
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 00daa8f7759..f1195a98f31 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb)
 		usb_kill_urb(urb);
 }
 
-static void keyspan_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+	p_priv->rts_state = on;
+	p_priv->dtr_state = on;
+	keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
 {
 	int			i;
 	struct usb_serial	*serial = port->serial;
@@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty,
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	tty_port_tty_set(&port->port, NULL);
 }
 
 /* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 38b4582e073..0d4569b6076 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -38,9 +38,8 @@
 static int  keyspan_open		(struct tty_struct *tty,
 					 struct usb_serial_port *port,
 					 struct file *filp);
-static void keyspan_close		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+static void keyspan_close		(struct usb_serial_port *port);
+static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
 static void keyspan_shutdown		(struct usb_serial *serial);
 static int  keyspan_write_room		(struct tty_struct *tty);
@@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.num_ports		= 1,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
@@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.num_ports		= 2,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
@@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.num_ports		= 4,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index bf1ae247da6..ab769dbea1b 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
 }
 
 
+static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+
+	if (serial->dev) {
+		if (on)
+			keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
+		else
+			keyspan_pda_set_modem_info(serial, 0);
+	}
+}
+
+static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	unsigned char modembits;
+
+	/* If we can read the modem status and the DCD is low then
+	   carrier is not raised yet */
+	if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
+		if (!(modembits & (1>>6)))
+			return 0;
+	}
+	/* Carrier raised, or we failed (eg disconnected) so
+	   progress accordingly */
+	return 1;
+}
+
+
 static int keyspan_pda_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
@@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty,
 	priv->tx_room = room;
 	priv->tx_throttled = room ? 0 : 1;
 
-	/* the normal serial device seems to always turn on DTR and RTS here,
-	   so do the same */
-	if (tty && (tty->termios->c_cflag & CBAUD))
-		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
-	else
-		keyspan_pda_set_modem_info(serial, 0);
-
 	/*Start reading from the device*/
 	port->interrupt_in_urb->dev = serial->dev;
 	rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
@@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty,
 error:
 	return rc;
 }
-
-
-static void keyspan_pda_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
 	if (serial->dev) {
-		/* the normal serial device seems to always shut
-		   off DTR and RTS now */
-		if (tty->termios->c_cflag & HUPCL)
-			keyspan_pda_set_modem_info(serial, 0);
-
 		/* shutdown our bulk reads and writes */
 		usb_kill_urb(port->write_urb);
 		usb_kill_urb(port->interrupt_in_urb);
@@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
 	.num_ports =		1,
+	.dtr_rts =		keyspan_pda_dtr_rts,
+	.carrier_raised	=	keyspan_pda_carrier_raised,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,
 	.write =		keyspan_pda_write,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fcd9082f3e7..fa817c66b3e 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -76,8 +76,7 @@ static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_shutdown(struct usb_serial *serial);
 static int  klsi_105_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void klsi_105_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 static void klsi_105_write_bulk_callback(struct urb *urb);
@@ -447,8 +446,7 @@ exit:
 } /* klsi_105_open */
 
 
-static void klsi_105_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c148544953b..6b570498287 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -72,8 +72,7 @@ static int  kobil_startup(struct usb_serial *serial);
 static void kobil_shutdown(struct usb_serial *serial);
 static int  kobil_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp);
+static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
 static int  kobil_write_room(struct tty_struct *tty);
@@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		while (serial->port[i]->port.count > 0)
-			kobil_close(NULL, serial->port[i], NULL);
+			kobil_close(serial->port[i]);
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty,
 }
 
 
-static void kobil_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
+	/* FIXME: Add rts/dtr methods */
 	if (port->write_urb) {
 		usb_kill_urb(port->write_urb);
 		usb_free_urb(port->write_urb);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 82930a7d509..873795548fc 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -95,8 +95,8 @@ static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_shutdown(struct usb_serial *serial);
 static int  mct_u232_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void mct_u232_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void mct_u232_close(struct usb_serial_port *port);
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
 static void mct_u232_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
@@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = {
 	.num_ports =	     1,
 	.open =		     mct_u232_open,
 	.close =	     mct_u232_close,
+	.dtr_rts =	     mct_u232_dtr_rts,
 	.throttle =	     mct_u232_throttle,
 	.unthrottle =	     mct_u232_unthrottle,
 	.read_int_callback = mct_u232_read_int_callback,
@@ -496,29 +497,29 @@ error:
 	return retval;
 } /* mct_u232_open */
 
-
-static void mct_u232_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	unsigned int c_cflag;
 	unsigned int control_state;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	dbg("%s port %d", __func__, port->number);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		mutex_lock(&port->serial->disc_mutex);
-		if (c_cflag & HUPCL && !port->serial->disconnected) {
-			/* drop DTR and RTS */
-			spin_lock_irq(&priv->lock);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* drop DTR and RTS */
+		spin_lock_irq(&priv->lock);
+		if (on)
+			priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+		else
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-			control_state = priv->control_state;
-			spin_unlock_irq(&priv->lock);
-			mct_u232_set_modem_ctrl(port->serial, control_state);
-		}
-		mutex_unlock(&port->serial->disc_mutex);
+		control_state = priv->control_state;
+		spin_unlock_irq(&priv->lock);
+		mct_u232_set_modem_ctrl(port->serial, control_state);
 	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
 
+static void mct_u232_close(struct usb_serial_port *port)
+{
+	dbg("%s port %d", __func__, port->number);
 
 	if (port->serial->dev) {
 		/* shutdown our urbs */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 24e3b5d4b4d..9e1a013ee7f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
 	return chars;
 }
 
-static void mos7720_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 84fb1dcd30d..10b78a37214 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 
 }
 
-/************************************************************************
- *
- * mos7840_block_until_tx_empty
- *
- *	This function will block the close until one of the following:
- *		1. TX count are 0
- *		2. The mos7840 has stopped
- *		3. A timeout of 3 seconds without activity has expired
- *
- ************************************************************************/
-static void mos7840_block_until_tx_empty(struct tty_struct *tty,
-				struct moschip_port *mos7840_port)
-{
-	int timeout = HZ / 10;
-	int wait = 30;
-	int count;
-
-	while (1) {
-
-		count = mos7840_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0)
-			return;
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
-					       timeout);
-
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timeout value back to seconds */
-			wait = 30;
-		}
-	}
-}
-
 /*****************************************************************************
  * mos7840_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
 
-static void mos7840_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty,
 		}
 	}
 
-	if (serial->dev)
-		/* flush and block until tx is empty */
-		mos7840_block_until_tx_empty(tty, mos7840_port);
-
 	/* While closing port, shutdown all bulk read, write  *
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index bcdcbb82270..f5f3751a888 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty,
 	return result;
 }
 
-static void navman_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index df653971272..1104617334f 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -66,8 +66,7 @@ static int debug;
 /* function prototypes */
 static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
-static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
 static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty,
 	return result;
 }
 
-static void omninet_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void omninet_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index b500ad10b75..c20480aa975 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return result;
 }
 
-static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
-			  struct file *filp)
+static void opticon_close(struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7817b82889c..a16d69fadba 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,9 @@
 /* Function prototypes */
 static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static void option_close(struct usb_serial_port *port);
+static void option_dtr_rts(struct usb_serial_port *port, int on);
+
 static int  option_startup(struct usb_serial *serial);
 static void option_shutdown(struct usb_serial *serial);
 static int  option_write_room(struct tty_struct *tty);
@@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty,
 static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int  option_send_setup(struct usb_serial_port *port);
 static int  option_suspend(struct usb_serial *serial, pm_message_t message);
 static int  option_resume(struct usb_serial *serial);
 
@@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = {
 	.num_ports         = 1,
 	.open              = option_open,
 	.close             = option_close,
+	.dtr_rts	   = option_dtr_rts,
 	.write             = option_write,
 	.write_room        = option_write_room,
 	.chars_in_buffer   = option_chars_in_buffer,
@@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty,
 	dbg("%s", __func__);
 	/* Doesn't support option setting */
 	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(tty, port);
+	option_send_setup(port);
 }
 
 static int option_tiocmget(struct tty_struct *tty, struct file *file)
@@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return option_send_setup(tty, port);
+	return option_send_setup(port);
 }
 
 /* Write */
@@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty,
 
 	dbg("%s", __func__);
 
-	/* Set some sane defaults */
-	portdata->rts_state = 1;
-	portdata->dtr_state = 1;
-
 	/* Reset low level data toggle and start reading from endpoints */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
@@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty,
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	option_send_setup(tty, port);
+	option_send_setup(port);
 
 	return 0;
 }
 
-static void option_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void option_dtr_rts(struct usb_serial_port *port, int on)
 {
-	int i;
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
 
 	dbg("%s", __func__);
 	portdata = usb_get_serial_port_data(port);
+	mutex_lock(&serial->disc_mutex);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+	if (serial->dev)
+		option_send_setup(port);
+	mutex_unlock(&serial->disc_mutex);
+}
 
-	portdata->rts_state = 0;
-	portdata->dtr_state = 0;
 
-	if (serial->dev) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
-			option_send_setup(tty, port);
-		mutex_unlock(&serial->disc_mutex);
+static void option_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct option_port_private *portdata;
+
+	dbg("%s", __func__);
+	portdata = usb_get_serial_port_data(port);
 
+	if (serial->dev) {
 		/* Stop reading/writing urbs */
 		for (i = 0; i < N_IN_URB; i++)
 			usb_kill_urb(portdata->in_urbs[i]);
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	tty_port_tty_set(&port->port, NULL);
 }
 
 /* Helper functions used by option_setup_urbs */
@@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial)
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
  * CDC.
 */
-static int option_send_setup(struct tty_struct *tty,
-						struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	int val = 0;
 	dbg("%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (tty) {
-		int val = 0;
-		if (portdata->dtr_state)
-			val |= 0x01;
-		if (portdata->rts_state)
-			val |= 0x02;
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
 
-		return usb_control_msg(serial->dev,
-			usb_rcvctrlpipe(serial->dev, 0),
-			0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	}
-	return 0;
+	return usb_control_msg(serial->dev,
+		usb_rcvctrlpipe(serial->dev, 0),
+		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 static int option_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index ba551f00f16..7de54781fe6 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -143,8 +143,7 @@ struct oti6858_control_pkt {
 /* function prototypes */
 static int oti6858_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
@@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty,
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
-		oti6858_close(tty, port, NULL);
+		oti6858_close(port);
 		return -EPROTO;
 	}
 
 	/* setup termios */
 	if (tty)
 		oti6858_set_termios(tty, port, &tmp_termios);
-
+	port->port.drain_delay = 256;	/* FIXME: check the FIFO length */
 	return 0;
 }
 
-static void oti6858_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = 30 * HZ;	/* PL2303_CLOSING_WAIT */
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	dbg("%s(): entering wait loop", __func__);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (oti6858_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		|| port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	dbg("%s(): after wait loop", __func__);
-
 	/* clear out any remaining data in the buffer */
 	oti6858_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	/* FIXME
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
-	else
-	*/
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-	dbg("%s(): after schedule_timeout_interruptible()", __func__);
+	dbg("%s(): after buf_clear()", __func__);
 
 	/* cancel scheduled setup */
 	cancel_delayed_work(&priv->delayed_setup_work);
@@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty,
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
-
-	/*
-	if (tty && (tty->termios->c_cflag) & HUPCL) {
-		// drop DTR and RTS
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->pending_setup.control &= ~CONTROL_MASK;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-	*/
 }
 
 static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 751a533a434..e02dc3d643c 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	kfree(buf);
 }
 
-static void pl2303_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = PL2303_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (pl2303_buf_data_avail(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current) ||
-		    port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	pl2303_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-
 	/* shutdown our urbs */
 	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			set_control_lines(port->serial->dev, 0);
-		}
-	}
 }
 
 static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
 
@@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = {
 	.num_ports =		1,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
+	.dtr_rts = 		pl2303_dtr_rts,
+	.carrier_raised =	pl2303_carrier_raised,
 	.write =		pl2303_write,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 913225c6161..17ac34f4d66 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -26,12 +26,10 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <linux/usb/ch9.h>
 
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 
-/* per port private data */
 #define N_IN_URB	4
 #define N_OUT_URB	4
 #define IN_BUFLEN	4096
@@ -39,6 +37,12 @@
 static int debug;
 static int nmea;
 
+/* Used in interface blacklisting */
+struct sierra_iface_info {
+	const u32 infolen;	/* number of interface numbers on blacklist */
+	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
+};
+
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
@@ -85,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 	return result;
 }
 
+static int is_blacklisted(const u8 ifnum,
+				const struct sierra_iface_info *blacklist)
+{
+	const u8  *info;
+	int i;
+
+	if (blacklist) {
+		info = blacklist->ifaceinfo;
+
+		for (i = 0; i < blacklist->infolen; i++) {
+			if (info[i] == ifnum)
+				return 1;
+		}
+	}
+	return 0;
+}
+
 static int sierra_calc_interface(struct usb_serial *serial)
 {
 	int interface;
@@ -153,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial,
 	 */
 	usb_set_serial_data(serial, (void *)num_ports);
 
+	/* ifnum could have changed - by calling usb_set_interface */
+	ifnum = sierra_calc_interface(serial);
+
+	if (is_blacklisted(ifnum,
+				(struct sierra_iface_info *)id->driver_info)) {
+		dev_dbg(&serial->dev->dev,
+			"Ignoring blacklisted interface #%d\n", ifnum);
+		return -ENODEV;
+	}
+
 	return result;
 }
 
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const struct sierra_iface_info direct_ip_interface_blacklist = {
+	.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
+	.ifaceinfo = direct_ip_non_serial_ifaces,
+};
+
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
@@ -188,9 +225,11 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
 	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
-	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
-	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
-	{ USB_DEVICE(0x1199, 0x683E) },	/* Sierra Wireless MC8790 */
+	/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8791 Composite */
+	/* Sierra Wireless MC8790, MC8791, MC8792 */
+	{ USB_DEVICE(0x1199, 0x683E) },
 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
@@ -211,6 +250,10 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
+	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
+
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -229,7 +272,6 @@ struct sierra_port_private {
 
 	/* Input endpoints and buffers for this port */
 	struct urb *in_urbs[N_IN_URB];
-	char *in_buffer[N_IN_URB];
 
 	/* Settings for the port */
 	int rts_state;	/* Handshaking pins (outputs) */
@@ -240,57 +282,50 @@ struct sierra_port_private {
 	int ri_state;
 };
 
-static int sierra_send_setup(struct tty_struct *tty,
-						struct usb_serial_port *port)
+static int sierra_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 	__u16 interface = 0;
+	int val = 0;
 
 	dev_dbg(&port->dev, "%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (tty) {
-		int val = 0;
-		if (portdata->dtr_state)
-			val |= 0x01;
-		if (portdata->rts_state)
-			val |= 0x02;
-
-		/* If composite device then properly report interface */
-		if (serial->num_ports == 1) {
-			interface = sierra_calc_interface(serial);
-
-			/* Control message is sent only to interfaces with
-			 * interrupt_in endpoints
-			 */
-			if (port->interrupt_in_urb) {
-				/* send control message */
-				return usb_control_msg(serial->dev,
-					usb_rcvctrlpipe(serial->dev, 0),
-					0x22, 0x21, val, interface,
-					NULL, 0, USB_CTRL_SET_TIMEOUT);
-			}
-		}
-
-		/* Otherwise the need to do non-composite mapping */
-		else {
-			if (port->bulk_out_endpointAddress == 2)
-				interface = 0;
-			else if (port->bulk_out_endpointAddress == 4)
-				interface = 1;
-			else if (port->bulk_out_endpointAddress == 5)
-				interface = 2;
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
 
+	/* If composite device then properly report interface */
+	if (serial->num_ports == 1) {
+		interface = sierra_calc_interface(serial);
+		/* Control message is sent only to interfaces with
+		 * interrupt_in endpoints
+		 */
+		if (port->interrupt_in_urb) {
+			/* send control message */
 			return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22, 0x21, val, interface,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
-
 		}
 	}
 
+	/* Otherwise the need to do non-composite mapping */
+	else {
+		if (port->bulk_out_endpointAddress == 2)
+			interface = 0;
+		else if (port->bulk_out_endpointAddress == 4)
+			interface = 1;
+		else if (port->bulk_out_endpointAddress == 5)
+			interface = 2;
+		return usb_control_msg(serial->dev,
+			usb_rcvctrlpipe(serial->dev, 0),
+			0x22, 0x21, val, interface,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	}
 	return 0;
 }
 
@@ -299,7 +334,7 @@ static void sierra_set_termios(struct tty_struct *tty,
 {
 	dev_dbg(&port->dev, "%s", __func__);
 	tty_termios_copy_hw(tty->termios, old_termios);
-	sierra_send_setup(tty, port);
+	sierra_send_setup(port);
 }
 
 static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
@@ -338,7 +373,18 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return sierra_send_setup(tty, port);
+	return sierra_send_setup(port);
+}
+
+static void sierra_release_urb(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	if (urb) {
+		port =  urb->context;
+		dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
 }
 
 static void sierra_outdat_callback(struct urb *urb)
@@ -465,7 +511,7 @@ static void sierra_indat_callback(struct urb *urb)
 				" received", __func__);
 
 		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				dev_err(&port->dev, "resubmit read urb failed."
@@ -557,67 +603,99 @@ static int sierra_write_room(struct tty_struct *tty)
 	return 2048;
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void sierra_stop_rx_urbs(struct usb_serial_port *port)
 {
-	struct sierra_port_private *portdata;
-	struct usb_serial *serial = port->serial;
 	int i;
-	struct urb *urb;
-	int result;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 
-	portdata = usb_get_serial_port_data(port);
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++)
+		usb_kill_urb(portdata->in_urbs[i]);
 
-	dev_dbg(&port->dev, "%s", __func__);
+	usb_kill_urb(port->interrupt_in_urb);
+}
 
-	/* Set some sane defaults */
-	portdata->rts_state = 1;
-	portdata->dtr_state = 1;
+static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	int ok_cnt;
+	int err = -EINVAL;
+	int i;
+	struct urb *urb;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 
-	/* Reset low level data toggle and start reading from endpoints */
-	for (i = 0; i < N_IN_URB; i++) {
+	ok_cnt = 0;
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
 		urb = portdata->in_urbs[i];
 		if (!urb)
 			continue;
-		if (urb->dev != serial->dev) {
-			dev_dbg(&port->dev, "%s: dev %p != %p",
-				 __func__, urb->dev, serial->dev);
-			continue;
+		err = usb_submit_urb(urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit urb failed: %d\n",
+				__func__, err);
+		} else {
+			ok_cnt++;
 		}
+	}
 
-		/*
-		 * make sure endpoint data toggle is synchronized with the
-		 * device
-		 */
-		usb_clear_halt(urb->dev, urb->pipe);
-
-		result = usb_submit_urb(urb, GFP_KERNEL);
-		if (result) {
-			dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
-				i, result, urb->transfer_buffer_length);
+	if (ok_cnt && port->interrupt_in_urb) {
+		err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
+				__func__, err);
 		}
 	}
 
-	sierra_send_setup(tty, port);
+	if (ok_cnt > 0) /* at least one rx urb submitted */
+		return 0;
+	else
+		return err;
+}
+
+static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
+					int dir, void *ctx, int len,
+					gfp_t mem_flags,
+					usb_complete_t callback)
+{
+	struct urb	*urb;
+	u8		*buf;
+
+	if (endpoint == -1)
+		return NULL;
 
-	/* start up the interrupt endpoint if we have one */
-	if (port->interrupt_in_urb) {
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev, "submit irq_in urb failed %d\n",
-				result);
+	urb = usb_alloc_urb(0, mem_flags);
+	if (urb == NULL) {
+		dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
+			__func__, endpoint);
+		return NULL;
 	}
-	return 0;
+
+	buf = kmalloc(len, mem_flags);
+	if (buf) {
+		/* Fill URB using supplied data */
+		usb_fill_bulk_urb(urb, serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			buf, len, callback, ctx);
+
+		/* debug */
+		dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+	} else {
+		dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+
+		sierra_release_urb(urb);
+		urb = NULL;
+	}
+
+	return urb;
 }
 
-static void sierra_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void sierra_close(struct usb_serial_port *port)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	portdata->rts_state = 0;
@@ -626,25 +704,83 @@ static void sierra_close(struct tty_struct *tty,
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			sierra_send_setup(tty, port);
+			sierra_send_setup(port);
 		mutex_unlock(&serial->disc_mutex);
 
-		/* Stop reading/writing urbs */
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
+		/* Stop reading urbs */
+		sierra_stop_rx_urbs(port);
+		/* .. and release them */
+		for (i = 0; i < N_IN_URB; i++) {
+			sierra_release_urb(portdata->in_urbs[i]);
+			portdata->in_urbs[i] = NULL;
+		}
 	}
+}
 
-	usb_kill_urb(port->interrupt_in_urb);
-	tty_port_tty_set(&port->port, NULL);
+static int sierra_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
+{
+	struct sierra_port_private *portdata;
+	struct usb_serial *serial = port->serial;
+	int i;
+	int err;
+	int endpoint;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dev_dbg(&port->dev, "%s", __func__);
+
+	/* Set some sane defaults */
+	portdata->rts_state = 1;
+	portdata->dtr_state = 1;
+
+
+	endpoint = port->bulk_in_endpointAddress;
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
+		urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
+					IN_BUFLEN, GFP_KERNEL,
+					sierra_indat_callback);
+		portdata->in_urbs[i] = urb;
+	}
+	/* clear halt condition */
+	usb_clear_halt(serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
+
+	err = sierra_submit_rx_urbs(port, GFP_KERNEL);
+	if (err) {
+		/* get rid of everything as in close */
+		sierra_close(port);
+		return err;
+	}
+	sierra_send_setup(port);
+
+	return 0;
+}
+
+
+static void sierra_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+
+	if (serial->dev) {
+		mutex_lock(&serial->disc_mutex);
+		if (!serial->disconnected)
+			sierra_send_setup(port);
+		mutex_unlock(&serial->disc_mutex);
+	}
 }
 
 static int sierra_startup(struct usb_serial *serial)
 {
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
-	struct urb *urb;
 	int i;
-	int j;
 
 	dev_dbg(&serial->dev->dev, "%s", __func__);
 
@@ -666,34 +802,8 @@ static int sierra_startup(struct usb_serial *serial)
 			return -ENOMEM;
 		}
 		spin_lock_init(&portdata->lock);
-		for (j = 0; j < N_IN_URB; j++) {
-			portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
-			if (!portdata->in_buffer[j]) {
-				for (--j; j >= 0; j--)
-					kfree(portdata->in_buffer[j]);
-				kfree(portdata);
-				return -ENOMEM;
-			}
-		}
-
+		/* Set the port private data pointer */
 		usb_set_serial_port_data(port, portdata);
-
-		/* initialize the in urbs */
-		for (j = 0; j < N_IN_URB; ++j) {
-			urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (urb == NULL) {
-				dev_dbg(&port->dev, "%s: alloc for in "
-					"port failed.", __func__);
-				continue;
-			}
-			/* Fill URB using supplied data. */
-			usb_fill_bulk_urb(urb, serial->dev,
-					  usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-					  portdata->in_buffer[j], IN_BUFLEN,
-					  sierra_indat_callback, port);
-			portdata->in_urbs[j] = urb;
-		}
 	}
 
 	return 0;
@@ -701,7 +811,7 @@ static int sierra_startup(struct usb_serial *serial)
 
 static void sierra_shutdown(struct usb_serial *serial)
 {
-	int i, j;
+	int i;
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
@@ -714,12 +824,6 @@ static void sierra_shutdown(struct usb_serial *serial)
 		portdata = usb_get_serial_port_data(port);
 		if (!portdata)
 			continue;
-
-		for (j = 0; j < N_IN_URB; j++) {
-			usb_kill_urb(portdata->in_urbs[j]);
-			usb_free_urb(portdata->in_urbs[j]);
-			kfree(portdata->in_buffer[j]);
-		}
 		kfree(portdata);
 		usb_set_serial_port_data(port, NULL);
 	}
@@ -737,6 +841,7 @@ static struct usb_serial_driver sierra_device = {
 	.probe		   = sierra_probe,
 	.open              = sierra_open,
 	.close             = sierra_close,
+	.dtr_rts	   = sierra_dtr_rts,
 	.write             = sierra_write,
 	.write_room        = sierra_write_room,
 	.set_termios       = sierra_set_termios,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5e7528cc81a..8f7ed8f1399 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
 			"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
 }
 
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & MSR_STATUS_LINE_DCD)
+		return 1;
+	return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control = MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS;
+	else
+		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
 /* close the serial port. We should wait for data sending to device 1st and
  * then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct usb_serial_port *port)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = SPCP8x5_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (ringbuf_avail_data(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current))
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-
 	/* clear out any remaining data in the buffer */
 	clear_ringbuf(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device (this is long enough
-	 * for the entire all byte spcp8x5 hardware buffer to drain with no
-	 * flow control for data rates of 1200 bps or more, for lower rates we
-	 * should really know how much data is in the buffer to compute a delay
-	 * that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560) / bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(timeout);
-
-	/* clear control lines */
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
-		}
-	}
-
 	/* kill urb */
 	if (port->write_urb != NULL) {
 		result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty,
 	if (ret)
 		return ret;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && (tty->termios->c_cflag & CBAUD))
-		priv->line_control = MCR_DTR | MCR_RTS;
-	else
-		priv->line_control = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 
 	/* Setup termios */
@@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty,
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (ret) {
-		spcp8x5_close(tty, port, NULL);
+		spcp8x5_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = {
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.close 			= spcp8x5_close,
+	.dtr_rts		= spcp8x5_dtr_rts,
+	.carrier_raised		= spcp8x5_carrier_raised,
 	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
 	.ioctl 			= spcp8x5_ioctl,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 69879e43794..8b07ebc6bae 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return result;
 }
 
-static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
-			  struct file *filp)
+static void symbol_close(struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 0a64bac306e..42cb04c403b 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial);
 static void ti_shutdown(struct usb_serial *serial);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
 		struct file *file);
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
 static int ti_write_room(struct tty_struct *tty);
@@ -647,8 +646,7 @@ release_lock:
 }
 
 
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *file)
+static void ti_close(struct usb_serial_port *port)
 {
 	struct ti_device *tdev;
 	struct ti_port *tport;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 0a566eea49c..1967a7edc10 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);
 	}
-
 	mutex_unlock(&port->mutex);
-	return 0;
+	/* Now do the correct tty layer semantics */
+	retval = tty_port_block_til_ready(&port->port, tty, filp);
+	if (retval == 0)
+		return 0;
 
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
@@ -259,64 +261,89 @@ bailout_serial_put:
 	return retval;
 }
 
-static void serial_close(struct tty_struct *tty, struct file *filp)
+/**
+ *	serial_do_down		-	shut down hardware
+ *	@port: port to shut down
+ *
+ *	Shut down a USB port unless it is the console. We never shut down the
+ *	console hardware as it will always be in use.
+ *
+ *	Don't free any resources at this point
+ */
+static void serial_do_down(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial_driver *drv = port->serial->type;
 	struct usb_serial *serial;
 	struct module *owner;
-	int count;
 
-	if (!port)
+	/* The console is magical, do not hang up the console hardware
+	   or there will be tears */
+	if (port->console)
 		return;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	mutex_lock(&port->mutex);
 	serial = port->serial;
 	owner = serial->type->driver.owner;
 
-	if (port->port.count == 0) {
-		mutex_unlock(&port->mutex);
-		return;
-	}
-
-	if (port->port.count == 1)
-		/* only call the device specific close if this
-		 * port is being closed by the last owner. Ensure we do
-		 * this before we drop the port count. The call is protected
-		 * by the port mutex
-		 */
-		serial->type->close(tty, port, filp);
-
-	if (port->port.count == (port->console ? 2 : 1)) {
-		struct tty_struct *tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			/* We must do this before we drop the port count to
-			   zero. */
-			if (tty->driver_data)
-				tty->driver_data = NULL;
-			tty_port_tty_set(&port->port, NULL);
-			tty_kref_put(tty);
-		}
-	}
+	if (drv->close)
+		drv->close(port);
 
-	--port->port.count;
-	count = port->port.count;
 	mutex_unlock(&port->mutex);
-	put_device(&port->dev);
+}
+
+/**
+ *	serial_do_free		-	free resources post close/hangup
+ *	@port: port to free up
+ *
+ *	Do the resource freeing and refcount dropping for the port. We must
+ *	be careful about ordering and we must avoid freeing up the console.
+ */
 
+static void serial_do_free(struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct module *owner;
+
+	/* The console is magical, do not hang up the console hardware
+	   or there will be tears */
+	if (port->console)
+		return;
+
+	serial = port->serial;
+	owner = serial->type->driver.owner;
+	put_device(&port->dev);
 	/* Mustn't dereference port any more */
-	if (count == 0) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
-			usb_autopm_put_interface(serial->interface);
-		mutex_unlock(&serial->disc_mutex);
-	}
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		usb_autopm_put_interface(serial->interface);
+	mutex_unlock(&serial->disc_mutex);
 	usb_serial_put(serial);
-
 	/* Mustn't dereference serial any more */
-	if (count == 0)
-		module_put(owner);
+	module_put(owner);
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s - port %d", __func__, port->number);
+
+
+	if (tty_port_close_start(&port->port, tty, filp) == 0)
+		return;
+
+	serial_do_down(port);		
+	tty_port_close_end(&port->port, tty);
+	tty_port_tty_set(&port->port, NULL);
+	serial_do_free(port);
+}
+
+static void serial_hangup(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	serial_do_down(port);
+	tty_port_hangup(&port->port);
+	serial_do_free(port);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device(
 	return NULL;
 }
 
+static int serial_carrier_raised(struct tty_port *port)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+	if (drv->carrier_raised)
+		return drv->carrier_raised(p);
+	/* No carrier control - don't block */
+	return 1;	
+}
+
+static void serial_dtr_rts(struct tty_port *port, int on)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+	if (drv->dtr_rts)
+		drv->dtr_rts(p, on);
+}
+
+static const struct tty_port_operations serial_port_ops = {
+	.carrier_raised = serial_carrier_raised,
+	.dtr_rts = serial_dtr_rts,
+};
+
 int usb_serial_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
@@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (!port)
 			goto probe_error;
 		tty_port_init(&port->port);
+		port->port.ops = &serial_port_ops;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
 		mutex_init(&port->mutex);
@@ -974,6 +1025,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (retval > 0) {
 			/* quietly accept this device, but don't bind to a
 			   serial port as it's about to disappear */
+			serial->num_ports = 0;
 			goto exit;
 		}
 	}
@@ -1070,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface)
 		if (port) {
 			struct tty_struct *tty = tty_port_tty_get(&port->port);
 			if (tty) {
+				/* The hangup will occur asynchronously but
+				   the object refcounts will sort out all the
+				   cleanup */
 				tty_hangup(tty);
 				tty_kref_put(tty);
 			}
@@ -1134,6 +1189,7 @@ static const struct tty_operations serial_ops = {
 	.open =			serial_open,
 	.close =		serial_close,
 	.write =		serial_write,
+	.hangup = 		serial_hangup,
 	.write_room =		serial_write_room,
 	.ioctl =		serial_ioctl,
 	.set_termios =		serial_set_termios,
@@ -1146,6 +1202,7 @@ static const struct tty_operations serial_ops = {
 	.proc_fops =		&serial_proc_fops,
 };
 
+
 struct tty_driver *usb_serial_tty_driver;
 
 static int __init usb_serial_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 5ac414bda71..b15f1c0e1d4 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -38,8 +38,7 @@
 /* function prototypes for a handspring visor */
 static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filp);
-static void visor_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static int  visor_write_room(struct tty_struct *tty);
@@ -324,8 +323,7 @@ exit:
 }
 
 
-static void visor_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void visor_close(struct usb_serial_port *port)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5335d3211c0..7c7295d09f3 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -147,8 +147,7 @@ static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_shutdown(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
 			const unsigned char *buf, int count);
@@ -712,8 +711,7 @@ exit:
 }
 
 
-static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void whiteheat_close(struct usb_serial_port *port)
 {
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
@@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	mutex_lock(&port->serial->disc_mutex);
-	/* filp is NULL when called from usb_serial_disconnect */
-	if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
-		mutex_unlock(&port->serial->disc_mutex);
-		return;
-	}
-	mutex_unlock(&port->serial->disc_mutex);
-
-	tty->closing = 1;
-
-/*
- * Not currently in use; tty_wait_until_sent() calls
- * serial_chars_in_buffer() which deadlocks on the second semaphore
- * acquisition. This should be fixed at some point. Greg's been
- * notified.
-	if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
-		tty_wait_until_sent(tty, CLOSING_DELAY);
-	}
-*/
-
-	tty_driver_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-
 	firm_report_tx_done(port);
-
 	firm_close(port);
 
 	/* shutdown our bulk reads and writes */
@@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty,
 	}
 	spin_unlock_irq(&info->lock);
 	mutex_unlock(&info->deathwarrant);
-
 	stop_command_port(port->serial);
-
-	tty->closing = 0;
 }
 
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 4ca3b586064..cfa26d56ce6 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -132,7 +132,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 		if (us->fflags & US_FL_MAX_SECTORS_MIN)
 			max_sectors = PAGE_CACHE_SIZE >> 9;
-		if (sdev->request_queue->max_sectors > max_sectors)
+		if (queue_max_sectors(sdev->request_queue) > max_sectors)
 			blk_queue_max_sectors(sdev->request_queue,
 					      max_sectors);
 	} else if (sdev->type == TYPE_TAPE) {
@@ -483,7 +483,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 
-	return sprintf(buf, "%u\n", sdev->request_queue->max_sectors);
+	return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue));
 }
 
 /* Input routine for the sysfs max_sectors file */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0048f1185a6..2b5a691064b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_IMX || ARCH_MX2)
+	depends on FB && (ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1759,6 +1759,16 @@ config FB_68328
 	  Say Y here if you want to support the built-in frame buffer of
 	  the Motorola 68328 CPU family.
 
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
 config FB_PXA
 	tristate "PXA LCD framebuffer support"
 	depends on FB && ARCH_PXA
@@ -1996,7 +2006,7 @@ config FB_PS3_DEFAULT_SIZE_M
 
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
-	depends on FB && XILINX_VIRTEX
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index d8d0be5151e..01a819f4737 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE)              += gbefb.o
 obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
 obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
 obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
 obj-$(CONFIG_FB_W100)		  += w100fb.o
 obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
 obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 61050ab1412..fb8163d181a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -351,7 +351,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	}
 
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
-	fb->fb.fix.mmio_len	= 4096;
+	fb->fb.fix.mmio_len	= resource_size(&fb->dev->res);
 
 	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
 	if (!fb->regs) {
@@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	return ret;
 }
 
-static int clcdfb_probe(struct amba_device *dev, void *id)
+static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct clcd_board *board = dev->dev.platform_data;
 	struct clcd_fb *fb;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 9a577a800db..2fb63f6ea2f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -29,14 +29,8 @@
 
 /* configurable parameters */
 #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN	8
-
-#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
-	defined(CONFIG_ARCH_AT91SAM9RL)
-#define ATMEL_LCDC_FIFO_SIZE		2048
-#else
-#define ATMEL_LCDC_FIFO_SIZE		512
-#endif
+#define ATMEL_LCDC_DMA_BURST_LEN	8	/* words */
+#define ATMEL_LCDC_FIFO_SIZE		512	/* words */
 
 #if defined(CONFIG_ARCH_AT91)
 #define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 35e8eb02b9e..e4e4d433b00 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -354,7 +354,7 @@ static int default_crt_on __devinitdata = 0;
 static int default_lcd_on __devinitdata = 1;
 
 #ifdef CONFIG_MTRR
-static int mtrr = 1;
+static bool mtrr = true;
 #endif
 
 #ifdef CONFIG_PMAC_BACKLIGHT
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 38e86b84dce..59d7d5ec17a 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -180,7 +180,7 @@ static inline void vga_set_mem_top(struct vc_data *c)
 }
 
 #ifdef CONFIG_VGACON_SOFT_SCROLLBACK
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 /* software scrollback */
 static void *vgacon_scrollback;
 static int vgacon_scrollback_tail;
@@ -210,8 +210,7 @@ static void vgacon_scrollback_init(int pitch)
  */
 static void __init_refok vgacon_scrollback_startup(void)
 {
-	vgacon_scrollback = alloc_bootmem(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE
-					  * 1024);
+	vgacon_scrollback = kcalloc(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024, GFP_NOWAIT);
 	vgacon_scrollback_init(vga_video_num_columns * 2);
 }
 
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 83c5cefc266..da7c01b39be 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1736,10 +1736,8 @@ static int __init cyber2000fb_init(void)
 
 #ifdef CONFIG_ARCH_SHARK
 	err = cyberpro_vl_probe();
-	if (!err) {
+	if (!err)
 		ret = 0;
-		__module_get(THIS_MODULE);
-	}
 #endif
 #ifdef CONFIG_PCI
 	err = pci_register_driver(&cyberpro_driver);
@@ -1749,14 +1747,15 @@ static int __init cyber2000fb_init(void)
 
 	return ret ? err : 0;
 }
+module_init(cyber2000fb_init);
 
+#ifndef CONFIG_ARCH_SHARK
 static void __exit cyberpro_exit(void)
 {
 	pci_unregister_driver(&cyberpro_driver);
 }
-
-module_init(cyber2000fb_init);
 module_exit(cyberpro_exit);
+#endif
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index fe5b519860b..1a83709f961 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -75,7 +75,7 @@ struct gbefb_par {
 static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
 static void *gbe_mem;
 static dma_addr_t gbe_dma_addr;
-unsigned long gbe_mem_phys;
+static unsigned long gbe_mem_phys;
 
 static struct {
 	uint16_t *cpu;
@@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
 
 static int flat_panel_enabled = 0;
 
@@ -205,7 +205,7 @@ static void gbe_reset(void)
  *              console.
  */
 
-void gbe_turn_off(void)
+static void gbe_turn_off(void)
 {
 	int i;
 	unsigned int val, x, y, vpixen_off;
@@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev)
  * Initialization
  */
 
-int __init gbefb_setup(char *options)
+static int __init gbefb_setup(char *options)
 {
 	char *this_opt;
 
@@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = {
 
 static struct platform_device *gbefb_device;
 
-int __init gbefb_init(void)
+static int __init gbefb_init(void)
 {
 	int ret = platform_driver_register(&gbefb_driver);
 	if (!ret) {
@@ -1301,7 +1301,7 @@ int __init gbefb_init(void)
 	return ret;
 }
 
-void __exit gbefb_exit(void)
+static void __exit gbefb_exit(void)
 {
 	platform_device_unregister(gbefb_device);
 	platform_driver_unregister(&gbefb_driver);
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index e6467cf9f19..020db7fc915 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -335,9 +335,9 @@ static int __init hitfb_probe(struct platform_device *dev)
 	if (fb_get_options("hitfb", NULL))
 		return -ENODEV;
 
-	hitfb_fix.mmio_start = CONFIG_HD64461_IOBASE+0x1000;
+	hitfb_fix.mmio_start = HD64461_IO_OFFSET(0x1000);
 	hitfb_fix.mmio_len = 0x1000;
-	hitfb_fix.smem_start = CONFIG_HD64461_IOBASE + 0x02000000;
+	hitfb_fix.smem_start = HD64461_IO_OFFSET(0x02000000);
 	hitfb_fix.smem_len = 512 * 1024;
 
 	lcdclor = fb_readw(HD64461_LCDCLOR);
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1c9b9..b7af5256e88 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg)
 	dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
 
 	/* We only need one interrupt, it will be re-enabled as needed */
-	disable_irq(ichannel->eof_irq);
+	disable_irq_nosync(ichannel->eof_irq);
 
 	complete(&mx3_fbi->flip_cmpl);
 }
@@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
 	mx3fb_blank(FB_BLANK_UNBLANK, fbi);
 
-	dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+	dev_info(dev, "registered, using mode %s\n", fb_mode);
 
 	ret = register_framebuffer(fbi);
 	if (ret < 0)
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index dfb72f5e4c9..148cbcc3960 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
 
 static int get_dss_clocks(void)
 {
-	if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) {
-		dev_err(dispc.fbdev->dev, "can't get dss_ick\n");
+	dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick");
+	if (IS_ERR(dispc.dss_ick)) {
+		dev_err(dispc.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(dispc.dss_ick);
 	}
 
-	if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) {
+	dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck");
+	if (IS_ERR(dispc.dss1_fck)) {
 		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(dispc.dss_ick);
 		return PTR_ERR(dispc.dss1_fck);
 	}
 
-	if (IS_ERR((dispc.dss_54m_fck =
-				clk_get(dispc.fbdev->dev, "dss_54m_fck")))) {
-		dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n");
+	dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck");
+	if (IS_ERR(dispc.dss_54m_fck)) {
+		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
 		clk_put(dispc.dss_ick);
 		clk_put(dispc.dss1_fck);
 		return PTR_ERR(dispc.dss_54m_fck);
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47202b..5d4f34887a2 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@ struct {
 	struct lcd_ctrl_extif	*extif;
 	struct lcd_ctrl		*int_ctrl;
 
-	void			(*power_up)(struct device *dev);
-	void			(*power_down)(struct device *dev);
+	struct clk		*sys_ck;
 } hwa742;
 
 struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@ static void hwa742_suspend(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	/* Enable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 static void hwa742_resume(void)
 {
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(hwa742.fbdev->dev);
+	clk_enable(hwa742.sys_ck);
+
 	/* Disable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 0);
 	while (1) {
@@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	omapfb_conf = fbdev->dev->platform_data;
 	ctrl_conf = omapfb_conf->ctrl_platform_data;
 
-	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+	if (ctrl_conf == NULL) {
 		dev_err(fbdev->dev, "HWA742: missing platform data\n");
 		r = -ENOENT;
 		goto err1;
 	}
 
-	hwa742.power_down = ctrl_conf->power_down;
-	hwa742.power_up = ctrl_conf->power_up;
+	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
 
 	spin_lock_init(&hwa742.req_lock);
 
@@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	if ((r = hwa742.extif->init(fbdev)) < 0)
 		goto err2;
 
-	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+	ext_clk = clk_get_rate(hwa742.sys_ck);
 	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
 		goto err3;
 	hwa742.extif->set_timings(&hwa742.reg_timings);
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(fbdev->dev);
+	clk_enable(hwa742.sys_ck);
 
 	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
 	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 
 	return 0;
 err4:
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 err3:
 	hwa742.extif->cleanup();
 err2:
@@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	hwa742.extif->cleanup();
 	hwa742.int_ctrl->cleanup();
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 struct lcd_ctrl hwa742_ctrl = {
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index a13c8dcad2a..9332d6ca645 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx)
 
 static int rfbi_get_clocks(void)
 {
-	if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) {
-		dev_err(rfbi.fbdev->dev, "can't get dss_ick\n");
+	rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick");
+	if (IS_ERR(rfbi.dss_ick)) {
+		dev_err(rfbi.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(rfbi.dss_ick);
 	}
 
-	if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) {
+	rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck");
+	if (IS_ERR(rfbi.dss1_fck)) {
 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(rfbi.dss_ick);
 		return PTR_ERR(rfbi.dss1_fck);
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
new file mode 100644
index 00000000000..84d8327e47d
--- /dev/null
+++ b/drivers/video/pxa168fb.c
@@ -0,0 +1,803 @@
+/*
+ * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
+ *
+ *  Copyright (C) 2008 Marvell International Ltd.
+ *  All rights reserved.
+ *
+ *  2009-02-16  adapted from original version for PXA168/910
+ *              Jun Nie <njun@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <video/pxa168fb.h>
+
+#include "pxa168fb.h"
+
+#define DEFAULT_REFRESH		60	/* Hz */
+
+static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
+{
+	/*
+	 * Pseudocolor mode?
+	 */
+	if (var->bits_per_pixel == 8)
+		return PIX_FMT_PSEUDOCOLOR;
+
+	/*
+	 * Check for 565/1555.
+	 */
+	if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
+	    var->green.length <= 6 && var->blue.length <= 5) {
+		if (var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB565;
+			else
+				return PIX_FMT_BGR565;
+		}
+
+		if (var->transp.length == 1 && var->green.length <= 5) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB1555;
+			else
+				return PIX_FMT_BGR1555;
+		}
+
+		/* fall through */
+	}
+
+	/*
+	 * Check for 888/A888.
+	 */
+	if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
+	    var->green.length <= 8 && var->blue.length <= 8) {
+		if (var->bits_per_pixel == 24 && var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888PACK;
+			else
+				return PIX_FMT_BGR888PACK;
+		}
+
+		if (var->bits_per_pixel == 32 && var->transp.length == 8) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGBA888;
+			else
+				return PIX_FMT_BGRA888;
+		} else {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888UNPACK;
+			else
+				return PIX_FMT_BGR888UNPACK;
+		}
+
+		/* fall through */
+	}
+
+	return -EINVAL;
+}
+
+static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
+{
+	switch (pix_fmt) {
+	case PIX_FMT_RGB565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 11;   var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGB1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_BGR1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 10;   var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_RGB888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGBA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_BGRA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_PSEUDOCOLOR:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 0;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	}
+}
+
+static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
+		     struct fb_videomode *mode, int pix_fmt, int ystretch)
+{
+	struct fb_info *info = fbi->info;
+
+	set_pix_fmt(var, pix_fmt);
+
+	var->xres = mode->xres;
+	var->yres = mode->yres;
+	var->xres_virtual = max(var->xres, var->xres_virtual);
+	if (ystretch)
+		var->yres_virtual = info->fix.smem_len /
+			(var->xres_virtual * (var->bits_per_pixel >> 3));
+	else
+		var->yres_virtual = max(var->yres, var->yres_virtual);
+	var->grayscale = 0;
+	var->accel_flags = FB_ACCEL_NONE;
+	var->pixclock = mode->pixclock;
+	var->left_margin = mode->left_margin;
+	var->right_margin = mode->right_margin;
+	var->upper_margin = mode->upper_margin;
+	var->lower_margin = mode->lower_margin;
+	var->hsync_len = mode->hsync_len;
+	var->vsync_len = mode->vsync_len;
+	var->sync = mode->sync;
+	var->vmode = FB_VMODE_NONINTERLACED;
+	var->rotate = FB_ROTATE_UR;
+}
+
+static int pxa168fb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	int pix_fmt;
+
+	/*
+	 * Determine which pixel format we're going to use.
+	 */
+	pix_fmt = determine_best_pix_fmt(var);
+	if (pix_fmt < 0)
+		return pix_fmt;
+	set_pix_fmt(var, pix_fmt);
+	fbi->pix_fmt = pix_fmt;
+
+	/*
+	 * Basic geometry sanity checks.
+	 */
+	if (var->xoffset + var->xres > var->xres_virtual)
+		return -EINVAL;
+	if (var->yoffset + var->yres > var->yres_virtual)
+		return -EINVAL;
+	if (var->xres + var->right_margin +
+	    var->hsync_len + var->left_margin > 2048)
+		return -EINVAL;
+	if (var->yres + var->lower_margin +
+	    var->vsync_len + var->upper_margin > 2048)
+		return -EINVAL;
+
+	/*
+	 * Check size of framebuffer.
+	 */
+	if (var->xres_virtual * var->yres_virtual *
+	    (var->bits_per_pixel >> 3) > info->fix.smem_len)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * The hardware clock divider has an integer and a fractional
+ * stage:
+ *
+ *	clk2 = clk_in / integer_divider
+ *	clk_out = clk2 * (1 - (fractional_divider >> 12))
+ *
+ * Calculate integer and fractional divider for given clk_in
+ * and clk_out.
+ */
+static void set_clock_divider(struct pxa168fb_info *fbi,
+			      const struct fb_videomode *m)
+{
+	int divider_int;
+	int needed_pixclk;
+	u64 div_result;
+	u32 x = 0;
+
+	/*
+	 * Notice: The field pixclock is used by linux fb
+	 * is in pixel second. E.g. struct fb_videomode &
+	 * struct fb_var_screeninfo
+	 */
+
+	/*
+	 * Check input values.
+	 */
+	if (!m || !m->pixclock || !m->refresh) {
+		dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
+		return;
+	}
+
+	/*
+	 * Using PLL/AXI clock.
+	 */
+	x = 0x80000000;
+
+	/*
+	 * Calc divider according to refresh rate.
+	 */
+	div_result = 1000000000000ll;
+	do_div(div_result, m->pixclock);
+	needed_pixclk = (u32)div_result;
+
+	divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
+
+	/* check whether divisor is too small. */
+	if (divider_int < 2) {
+		dev_warn(fbi->dev, "Warning: clock source is too slow."
+				"Try smaller resolution\n");
+		divider_int = 2;
+	}
+
+	/*
+	 * Set setting to reg.
+	 */
+	x |= divider_int;
+	writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
+}
+
+static void set_dma_control0(struct pxa168fb_info *fbi)
+{
+	u32 x;
+
+	/*
+	 * Set bit to enable graphics DMA.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+	x |= fbi->active ? 0x00000100 : 0;
+	fbi->active = 0;
+
+	/*
+	 * If we are in a pseudo-color mode, we need to enable
+	 * palette lookup.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		x |= 0x10000000;
+
+	/*
+	 * Configure hardware pixel format.
+	 */
+	x &= ~(0xF << 16);
+	x |= (fbi->pix_fmt >> 1) << 16;
+
+	/*
+	 * Check red and blue pixel swap.
+	 * 1. source data swap
+	 * 2. panel output data swap
+	 */
+	x &= ~(1 << 12);
+	x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+}
+
+static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
+{
+	u32 x;
+
+	/*
+	 * Configure default bits: vsync triggers DMA, gated clock
+	 * enable, power save enable, configure alpha registers to
+	 * display 100% graphics, and set pixel command.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
+	x |= 0x2032ff81;
+
+	/*
+	 * We trigger DMA on the falling edge of vsync if vsync is
+	 * active low, or on the rising edge if vsync is active high.
+	 */
+	if (!(sync & FB_SYNC_VERT_HIGH_ACT))
+		x |= 0x08000000;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
+}
+
+static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int pixel_offset;
+	unsigned long addr;
+
+	pixel_offset = (yoffset * var->xres_virtual) + xoffset;
+
+	addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
+	writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
+}
+
+static void set_dumb_panel_control(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
+	u32 x;
+
+	/*
+	 * Preserve enable flag.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
+
+	x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
+	x |= mi->gpio_output_data << 20;
+	x |= mi->gpio_output_mask << 12;
+	x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
+	x |= mi->invert_composite_blank ? 0x00000040 : 0;
+	x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
+	x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
+	x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
+	x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
+	x |= mi->invert_pixclock ? 0x00000002 : 0;
+
+	writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+}
+
+static void set_dumb_screen_dimensions(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *v = &info->var;
+	int x;
+	int y;
+
+	x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
+	y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
+
+	writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
+}
+
+static int pxa168fb_set_par(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	struct fb_videomode mode;
+	u32 x;
+	struct pxa168fb_mach_info *mi;
+
+	mi = fbi->dev->platform_data;
+
+	/*
+	 * Set additional mode info.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+	info->fix.ypanstep = var->yres;
+
+	/*
+	 * Disable panel output while we setup the display.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	/*
+	 * Configure global panel parameters.
+	 */
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_V_H_ACTIVE);
+
+	/*
+	 * convet var to video mode
+	 */
+	fb_var_to_videomode(&mode, &info->var);
+
+	/* Calculate clock divisor. */
+	set_clock_divider(fbi, &mode);
+
+	/* Configure dma ctrl regs. */
+	set_dma_control0(fbi);
+	set_dma_control1(fbi, info->var.sync);
+
+	/*
+	 * Configure graphics DMA parameters.
+	 */
+	x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
+	x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
+	writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
+
+	/*
+	 * Configure dumb panel ctrl regs & timings.
+	 */
+	set_dumb_panel_control(info);
+	set_dumb_screen_dimensions(info);
+
+	writel((var->left_margin << 16) | var->right_margin,
+			fbi->reg_base + LCD_SPU_H_PORCH);
+	writel((var->upper_margin << 16) | var->lower_margin,
+			fbi->reg_base + LCD_SPU_V_PORCH);
+
+	/*
+	 * Re-enable panel output.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	return 0;
+}
+
+static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+	return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
+}
+
+static u32 to_rgb(u16 red, u16 green, u16 blue)
+{
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	return (red << 16) | (green << 8) | blue;
+}
+
+static int
+pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+		 unsigned int blue, unsigned int trans, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	u32 val;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+					7471 * blue) >> 16;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
+		val =  chan_to_field(red,   &info->var.red);
+		val |= chan_to_field(green, &info->var.green);
+		val |= chan_to_field(blue , &info->var.blue);
+		fbi->pseudo_palette[regno] = val;
+	}
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+		val = to_rgb(red, green, blue);
+		writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
+		writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
+	}
+
+	return 0;
+}
+
+static int pxa168fb_blank(int blank, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+
+	fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
+	set_dumb_panel_control(info);
+
+	return 0;
+}
+
+static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	set_graphics_start(info, var->xoffset, var->yoffset);
+
+	return 0;
+}
+
+static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
+{
+	struct pxa168fb_info *fbi = dev_id;
+	u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
+
+	if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
+
+		writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
+			fbi->reg_base + SPU_IRQ_ISR);
+
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static struct fb_ops pxa168fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= pxa168fb_check_var,
+	.fb_set_par	= pxa168fb_set_par,
+	.fb_setcolreg	= pxa168fb_setcolreg,
+	.fb_blank	= pxa168fb_blank,
+	.fb_pan_display	= pxa168fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int __init pxa168fb_init_mode(struct fb_info *info,
+			      struct pxa168fb_mach_info *mi)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int ret = 0;
+	u32 total_w, total_h, refresh;
+	u64 div_result;
+	const struct fb_videomode *m;
+
+	/*
+	 * Set default value
+	 */
+	refresh = DEFAULT_REFRESH;
+
+	/* try to find best video mode. */
+	m = fb_find_best_mode(&info->var, &info->modelist);
+	if (m)
+		fb_videomode_to_var(&info->var, m);
+
+	/* Init settings. */
+	var->xres_virtual = var->xres;
+	var->yres_virtual = info->fix.smem_len /
+		(var->xres_virtual * (var->bits_per_pixel >> 3));
+	dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
+				var->xres, var->yres);
+
+	/* correct pixclock. */
+	total_w = var->xres + var->left_margin + var->right_margin +
+		  var->hsync_len;
+	total_h = var->yres + var->upper_margin + var->lower_margin +
+		  var->vsync_len;
+
+	div_result = 1000000000000ll;
+	do_div(div_result, total_w * total_h * refresh);
+	var->pixclock = (u32)div_result;
+
+	return ret;
+}
+
+static int __init pxa168fb_probe(struct platform_device *pdev)
+{
+	struct pxa168fb_mach_info *mi;
+	struct fb_info *info = 0;
+	struct pxa168fb_info *fbi = 0;
+	struct resource *res;
+	struct clk *clk;
+	int irq, ret;
+
+	mi = pdev->dev.platform_data;
+	if (mi == NULL) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	clk = clk_get(&pdev->dev, "LCDCLK");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get LCDCLK");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no IO memory defined\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ defined\n");
+		return -ENOENT;
+	}
+
+	info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
+	if (info == NULL) {
+		clk_put(clk);
+		return -ENOMEM;
+	}
+
+	/* Initialize private data */
+	fbi = info->par;
+	fbi->info = info;
+	fbi->clk = clk;
+	fbi->dev = info->dev = &pdev->dev;
+	fbi->panel_rbswap = mi->panel_rbswap;
+	fbi->is_blanked = 0;
+	fbi->active = mi->active;
+
+	/*
+	 * Initialise static fb parameters.
+	 */
+	info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
+		      FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+	info->node = -1;
+	strlcpy(info->fix.id, mi->id, 16);
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux = 0;
+	info->fix.xpanstep = 0;
+	info->fix.ypanstep = 0;
+	info->fix.ywrapstep = 0;
+	info->fix.mmio_start = res->start;
+	info->fix.mmio_len = res->end - res->start + 1;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->fbops = &pxa168fb_ops;
+	info->pseudo_palette = fbi->pseudo_palette;
+
+	/*
+	 * Map LCD controller registers.
+	 */
+	fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+	if (fbi->reg_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	/*
+	 * Allocate framebuffer memory.
+	 */
+	info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
+						&fbi->fb_start_dma, GFP_KERNEL);
+	if (info->screen_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+
+	/*
+	 * Set video mode according to platform data.
+	 */
+	set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
+
+	fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
+
+	/*
+	 * init video mode data.
+	 */
+	pxa168fb_init_mode(info, mi);
+
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed_free_fbmem;
+
+	/*
+	 * Fill in sane defaults.
+	 */
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed;
+
+	/*
+	 * enable controller clock
+	 */
+	clk_enable(fbi->clk);
+
+	pxa168fb_set_par(info);
+
+	/*
+	 * Configure default register values.
+	 */
+	writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
+	writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
+	writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
+	writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
+	writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
+	writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
+		fbi->reg_base + LCD_SPU_SRAM_PARA1);
+
+	/*
+	 * Allocate color map.
+	 */
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		ret = -ENOMEM;
+		goto failed_free_clk;
+	}
+
+	/*
+	 * Register irq handler.
+	 */
+	ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
+					info->fix.id, fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to request IRQ\n");
+		ret = -ENXIO;
+		goto failed_free_cmap;
+	}
+
+	/*
+	 * Enable GFX interrupt
+	 */
+	writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
+
+	/*
+	 * Register framebuffer.
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
+		ret = -ENXIO;
+		goto failed_free_irq;
+	}
+
+	platform_set_drvdata(pdev, fbi);
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, fbi);
+failed_free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+failed_free_clk:
+	clk_disable(fbi->clk);
+failed_free_fbmem:
+	dma_free_coherent(fbi->dev, info->fix.smem_len,
+			info->screen_base, fbi->fb_start_dma);
+failed:
+	kfree(info);
+	clk_put(clk);
+
+	dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
+	return ret;
+}
+
+static struct platform_driver pxa168fb_driver = {
+	.driver		= {
+		.name	= "pxa168-fb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pxa168fb_probe,
+};
+
+static int __devinit pxa168fb_init(void)
+{
+	return platform_driver_register(&pxa168fb_driver);
+}
+module_init(pxa168fb_init);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
+	      "Green Wan <gwan@marvell.com>");
+MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h
new file mode 100644
index 00000000000..eee09279c52
--- /dev/null
+++ b/drivers/video/pxa168fb.h
@@ -0,0 +1,558 @@
+#ifndef __PXA168FB_H__
+#define __PXA168FB_H__
+
+/* ------------< LCD register >------------ */
+/* Video Frame 0&1 start address registers */
+#define	LCD_SPU_DMA_START_ADDR_Y0		0x00C0
+#define	LCD_SPU_DMA_START_ADDR_U0		0x00C4
+#define	LCD_SPU_DMA_START_ADDR_V0		0x00C8
+#define LCD_CFG_DMA_START_ADDR_0		0x00CC /* Cmd address */
+#define	LCD_SPU_DMA_START_ADDR_Y1		0x00D0
+#define	LCD_SPU_DMA_START_ADDR_U1		0x00D4
+#define	LCD_SPU_DMA_START_ADDR_V1		0x00D8
+#define LCD_CFG_DMA_START_ADDR_1		0x00DC /* Cmd address */
+
+/* YC & UV Pitch */
+#define LCD_SPU_DMA_PITCH_YC			0x00E0
+#define     SPU_DMA_PITCH_C(c)			((c) << 16)
+#define     SPU_DMA_PITCH_Y(y)			(y)
+#define LCD_SPU_DMA_PITCH_UV			0x00E4
+#define     SPU_DMA_PITCH_V(v)			((v) << 16)
+#define     SPU_DMA_PITCH_U(u)			(u)
+
+/* Video Starting Point on Screen Register */
+#define LCD_SPUT_DMA_OVSA_HPXL_VLN		0x00E8
+#define     CFG_DMA_OVSA_VLN(y)			((y) << 16) /* 0~0xfff */
+#define     CFG_DMA_OVSA_HPXL(x)		(x)     /* 0~0xfff */
+
+/* Video Size Register */
+#define LCD_SPU_DMA_HPXL_VLN			0x00EC
+#define     CFG_DMA_VLN(y)			((y) << 16)
+#define     CFG_DMA_HPXL(x)			(x)
+
+/* Video Size After zooming Register */
+#define LCD_SPU_DZM_HPXL_VLN			0x00F0
+#define     CFG_DZM_VLN(y)			((y) << 16)
+#define     CFG_DZM_HPXL(x)			(x)
+
+/* Graphic Frame 0&1 Starting Address Register */
+#define LCD_CFG_GRA_START_ADDR0			0x00F4
+#define LCD_CFG_GRA_START_ADDR1			0x00F8
+
+/* Graphic Frame Pitch */
+#define LCD_CFG_GRA_PITCH			0x00FC
+
+/* Graphic Starting Point on Screen Register */
+#define LCD_SPU_GRA_OVSA_HPXL_VLN		0x0100
+#define     CFG_GRA_OVSA_VLN(y)			((y) << 16)
+#define     CFG_GRA_OVSA_HPXL(x)		(x)
+
+/* Graphic Size Register */
+#define LCD_SPU_GRA_HPXL_VLN			0x0104
+#define     CFG_GRA_VLN(y)			((y) << 16)
+#define     CFG_GRA_HPXL(x)			(x)
+
+/* Graphic Size after Zooming Register */
+#define LCD_SPU_GZM_HPXL_VLN			0x0108
+#define     CFG_GZM_VLN(y)			((y) << 16)
+#define     CFG_GZM_HPXL(x)			(x)
+
+/* HW Cursor Starting Point on Screen Register */
+#define LCD_SPU_HWC_OVSA_HPXL_VLN		0x010C
+#define     CFG_HWC_OVSA_VLN(y)			((y) << 16)
+#define     CFG_HWC_OVSA_HPXL(x)		(x)
+
+/* HW Cursor Size */
+#define LCD_SPU_HWC_HPXL_VLN			0x0110
+#define     CFG_HWC_VLN(y)			((y) << 16)
+#define     CFG_HWC_HPXL(x)			(x)
+
+/* Total Screen Size Register */
+#define LCD_SPUT_V_H_TOTAL			0x0114
+#define     CFG_V_TOTAL(y)			((y) << 16)
+#define     CFG_H_TOTAL(x)			(x)
+
+/* Total Screen Active Size Register */
+#define LCD_SPU_V_H_ACTIVE			0x0118
+#define     CFG_V_ACTIVE(y)			((y) << 16)
+#define     CFG_H_ACTIVE(x)			(x)
+
+/* Screen H&V Porch Register */
+#define LCD_SPU_H_PORCH				0x011C
+#define     CFG_H_BACK_PORCH(b)			((b) << 16)
+#define     CFG_H_FRONT_PORCH(f)		(f)
+#define LCD_SPU_V_PORCH				0x0120
+#define     CFG_V_BACK_PORCH(b)			((b) << 16)
+#define     CFG_V_FRONT_PORCH(f)		(f)
+
+/* Screen Blank Color Register */
+#define LCD_SPU_BLANKCOLOR			0x0124
+#define     CFG_BLANKCOLOR_MASK			0x00FFFFFF
+#define     CFG_BLANKCOLOR_R_MASK		0x000000FF
+#define     CFG_BLANKCOLOR_G_MASK		0x0000FF00
+#define     CFG_BLANKCOLOR_B_MASK		0x00FF0000
+
+/* HW Cursor Color 1&2 Register */
+#define LCD_SPU_ALPHA_COLOR1			0x0128
+#define     CFG_HWC_COLOR1			0x00FFFFFF
+#define     CFG_HWC_COLOR1_R(red)		((red) << 16)
+#define     CFG_HWC_COLOR1_G(green)		((green) << 8)
+#define     CFG_HWC_COLOR1_B(blue)		(blue)
+#define     CFG_HWC_COLOR1_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR1_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR1_B_MASK		0x00FF0000
+#define LCD_SPU_ALPHA_COLOR2			0x012C
+#define     CFG_HWC_COLOR2			0x00FFFFFF
+#define     CFG_HWC_COLOR2_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR2_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR2_B_MASK		0x00FF0000
+
+/* Video YUV Color Key Control */
+#define LCD_SPU_COLORKEY_Y			0x0130
+#define     CFG_CKEY_Y2(y2)			((y2) << 24)
+#define     CFG_CKEY_Y2_MASK			0xFF000000
+#define     CFG_CKEY_Y1(y1)			((y1) << 16)
+#define     CFG_CKEY_Y1_MASK			0x00FF0000
+#define     CFG_CKEY_Y(y)			((y) << 8)
+#define     CFG_CKEY_Y_MASK			0x0000FF00
+#define     CFG_ALPHA_Y(y)			(y)
+#define     CFG_ALPHA_Y_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_U			0x0134
+#define     CFG_CKEY_U2(u2)			((u2) << 24)
+#define     CFG_CKEY_U2_MASK			0xFF000000
+#define     CFG_CKEY_U1(u1)			((u1) << 16)
+#define     CFG_CKEY_U1_MASK			0x00FF0000
+#define     CFG_CKEY_U(u)			((u) << 8)
+#define     CFG_CKEY_U_MASK			0x0000FF00
+#define     CFG_ALPHA_U(u)			(u)
+#define     CFG_ALPHA_U_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_V			0x0138
+#define     CFG_CKEY_V2(v2)			((v2) << 24)
+#define     CFG_CKEY_V2_MASK			0xFF000000
+#define     CFG_CKEY_V1(v1)			((v1) << 16)
+#define     CFG_CKEY_V1_MASK			0x00FF0000
+#define     CFG_CKEY_V(v)			((v) << 8)
+#define     CFG_CKEY_V_MASK			0x0000FF00
+#define     CFG_ALPHA_V(v)			(v)
+#define     CFG_ALPHA_V_MASK			0x000000FF
+
+/* SPI Read Data Register */
+#define LCD_SPU_SPI_RXDATA			0x0140
+
+/* Smart Panel Read Data Register */
+#define LCD_SPU_ISA_RSDATA			0x0144
+#define     ISA_RXDATA_16BIT_1_DATA_MASK	0x000000FF
+#define     ISA_RXDATA_16BIT_2_DATA_MASK	0x0000FF00
+#define     ISA_RXDATA_16BIT_3_DATA_MASK	0x00FF0000
+#define     ISA_RXDATA_16BIT_4_DATA_MASK	0xFF000000
+#define     ISA_RXDATA_32BIT_1_DATA_MASK	0x00FFFFFF
+
+/* HWC SRAM Read Data Register */
+#define LCD_SPU_HWC_RDDAT			0x0158
+
+/* Gamma Table SRAM Read Data Register */
+#define LCD_SPU_GAMMA_RDDAT			0x015c
+#define     CFG_GAMMA_RDDAT_MASK		0x000000FF
+
+/* Palette Table SRAM Read Data Register */
+#define LCD_SPU_PALETTE_RDDAT			0x0160
+#define     CFG_PALETTE_RDDAT_MASK		0x00FFFFFF
+
+/* I/O Pads Input Read Only Register */
+#define LCD_SPU_IOPAD_IN			0x0178
+#define     CFG_IOPAD_IN_MASK			0x0FFFFFFF
+
+/* Reserved Read Only Registers */
+#define LCD_CFG_RDREG5F				0x017C
+#define     IRE_FRAME_CNT_MASK			0x000000C0
+#define     IPE_FRAME_CNT_MASK			0x00000030
+#define     GRA_FRAME_CNT_MASK			0x0000000C  /* Graphic */
+#define     DMA_FRAME_CNT_MASK			0x00000003  /* Video */
+
+/* SPI Control Register. */
+#define LCD_SPU_SPI_CTRL			0x0180
+#define     CFG_SCLKCNT(div)			((div) << 24)  /* 0xFF~0x2 */
+#define     CFG_SCLKCNT_MASK			0xFF000000
+#define     CFG_RXBITS(rx)			((rx) << 16)   /* 0x1F~0x1 */
+#define     CFG_RXBITS_MASK			0x00FF0000
+#define     CFG_TXBITS(tx)			((tx) << 8)    /* 0x1F~0x1 */
+#define     CFG_TXBITS_MASK			0x0000FF00
+#define     CFG_CLKINV(clk)			((clk) << 7)
+#define     CFG_CLKINV_MASK			0x00000080
+#define     CFG_KEEPXFER(transfer)		((transfer) << 6)
+#define     CFG_KEEPXFER_MASK			0x00000040
+#define     CFG_RXBITSTO0(rx)			((rx) << 5)
+#define     CFG_RXBITSTO0_MASK			0x00000020
+#define     CFG_TXBITSTO0(tx)			((tx) << 4)
+#define     CFG_TXBITSTO0_MASK			0x00000010
+#define     CFG_SPI_ENA(spi)			((spi) << 3)
+#define     CFG_SPI_ENA_MASK			0x00000008
+#define     CFG_SPI_SEL(spi)			((spi) << 2)
+#define     CFG_SPI_SEL_MASK			0x00000004
+#define     CFG_SPI_3W4WB(wire)			((wire) << 1)
+#define     CFG_SPI_3W4WB_MASK			0x00000002
+#define     CFG_SPI_START(start)		(start)
+#define     CFG_SPI_START_MASK			0x00000001
+
+/* SPI Tx Data Register */
+#define LCD_SPU_SPI_TXDATA			0x0184
+
+/*
+   1. Smart Pannel 8-bit Bus Control Register.
+   2. AHB Slave Path Data Port Register
+*/
+#define LCD_SPU_SMPN_CTRL			0x0188
+
+/* DMA Control 0 Register */
+#define LCD_SPU_DMA_CTRL0			0x0190
+#define     CFG_NOBLENDING(nb)			((nb) << 31)
+#define     CFG_NOBLENDING_MASK			0x80000000
+#define     CFG_GAMMA_ENA(gn)			((gn) << 30)
+#define     CFG_GAMMA_ENA_MASK			0x40000000
+#define     CFG_CBSH_ENA(cn)			((cn) << 29)
+#define     CFG_CBSH_ENA_MASK			0x20000000
+#define     CFG_PALETTE_ENA(pn)			((pn) << 28)
+#define     CFG_PALETTE_ENA_MASK		0x10000000
+#define     CFG_ARBFAST_ENA(an)			((an) << 27)
+#define     CFG_ARBFAST_ENA_MASK		0x08000000
+#define     CFG_HWC_1BITMOD(mode)		((mode) << 26)
+#define     CFG_HWC_1BITMOD_MASK		0x04000000
+#define     CFG_HWC_1BITENA(mn)			((mn) << 25)
+#define     CFG_HWC_1BITENA_MASK		0x02000000
+#define     CFG_HWC_ENA(cn)		        ((cn) << 24)
+#define     CFG_HWC_ENA_MASK			0x01000000
+#define     CFG_DMAFORMAT(dmaformat)		((dmaformat) << 20)
+#define     CFG_DMAFORMAT_MASK			0x00F00000
+#define     CFG_GRAFORMAT(graformat)		((graformat) << 16)
+#define     CFG_GRAFORMAT_MASK			0x000F0000
+/* for graphic part */
+#define     CFG_GRA_FTOGGLE(toggle)		((toggle) << 15)
+#define     CFG_GRA_FTOGGLE_MASK		0x00008000
+#define     CFG_GRA_HSMOOTH(smooth)		((smooth) << 14)
+#define     CFG_GRA_HSMOOTH_MASK		0x00004000
+#define     CFG_GRA_TSTMODE(test)		((test) << 13)
+#define     CFG_GRA_TSTMODE_MASK		0x00002000
+#define     CFG_GRA_SWAPRB(swap)		((swap) << 12)
+#define     CFG_GRA_SWAPRB_MASK			0x00001000
+#define     CFG_GRA_SWAPUV(swap)		((swap) << 11)
+#define     CFG_GRA_SWAPUV_MASK			0x00000800
+#define     CFG_GRA_SWAPYU(swap)		((swap) << 10)
+#define     CFG_GRA_SWAPYU_MASK			0x00000400
+#define     CFG_YUV2RGB_GRA(cvrt)		((cvrt) << 9)
+#define     CFG_YUV2RGB_GRA_MASK		0x00000200
+#define     CFG_GRA_ENA(gra)			((gra) << 8)
+#define     CFG_GRA_ENA_MASK			0x00000100
+/* for video part */
+#define     CFG_DMA_FTOGGLE(toggle)		((toggle) << 7)
+#define     CFG_DMA_FTOGGLE_MASK		0x00000080
+#define     CFG_DMA_HSMOOTH(smooth)		((smooth) << 6)
+#define     CFG_DMA_HSMOOTH_MASK		0x00000040
+#define     CFG_DMA_TSTMODE(test)		((test) << 5)
+#define     CFG_DMA_TSTMODE_MASK		0x00000020
+#define     CFG_DMA_SWAPRB(swap)		((swap) << 4)
+#define     CFG_DMA_SWAPRB_MASK			0x00000010
+#define     CFG_DMA_SWAPUV(swap)		((swap) << 3)
+#define     CFG_DMA_SWAPUV_MASK			0x00000008
+#define     CFG_DMA_SWAPYU(swap)		((swap) << 2)
+#define     CFG_DMA_SWAPYU_MASK			0x00000004
+#define     CFG_DMA_SWAP_MASK			0x0000001C
+#define     CFG_YUV2RGB_DMA(cvrt)		((cvrt) << 1)
+#define     CFG_YUV2RGB_DMA_MASK		0x00000002
+#define     CFG_DMA_ENA(video)			(video)
+#define     CFG_DMA_ENA_MASK			0x00000001
+
+/* DMA Control 1 Register */
+#define LCD_SPU_DMA_CTRL1			0x0194
+#define     CFG_FRAME_TRIG(trig)		((trig) << 31)
+#define     CFG_FRAME_TRIG_MASK			0x80000000
+#define     CFG_VSYNC_TRIG(trig)		((trig) << 28)
+#define     CFG_VSYNC_TRIG_MASK			0x70000000
+#define     CFG_VSYNC_INV(inv)			((inv) << 27)
+#define     CFG_VSYNC_INV_MASK			0x08000000
+#define     CFG_COLOR_KEY_MODE(cmode)		((cmode) << 24)
+#define     CFG_COLOR_KEY_MASK			0x07000000
+#define     CFG_CARRY(carry)			((carry) << 23)
+#define     CFG_CARRY_MASK			0x00800000
+#define     CFG_LNBUF_ENA(lnbuf)		((lnbuf) << 22)
+#define     CFG_LNBUF_ENA_MASK			0x00400000
+#define     CFG_GATED_ENA(gated)		((gated) << 21)
+#define     CFG_GATED_ENA_MASK			0x00200000
+#define     CFG_PWRDN_ENA(power)		((power) << 20)
+#define     CFG_PWRDN_ENA_MASK			0x00100000
+#define     CFG_DSCALE(dscale)			((dscale) << 18)
+#define     CFG_DSCALE_MASK			0x000C0000
+#define     CFG_ALPHA_MODE(amode)		((amode) << 16)
+#define     CFG_ALPHA_MODE_MASK			0x00030000
+#define     CFG_ALPHA(alpha)			((alpha) << 8)
+#define     CFG_ALPHA_MASK			0x0000FF00
+#define     CFG_PXLCMD(pxlcmd)			(pxlcmd)
+#define     CFG_PXLCMD_MASK			0x000000FF
+
+/* SRAM Control Register */
+#define LCD_SPU_SRAM_CTRL			0x0198
+#define     CFG_SRAM_INIT_WR_RD(mode)		((mode) << 14)
+#define     CFG_SRAM_INIT_WR_RD_MASK		0x0000C000
+#define     CFG_SRAM_ADDR_LCDID(id)		((id) << 8)
+#define     CFG_SRAM_ADDR_LCDID_MASK		0x00000F00
+#define     CFG_SRAM_ADDR(addr)			(addr)
+#define     CFG_SRAM_ADDR_MASK			0x000000FF
+
+/* SRAM Write Data Register */
+#define LCD_SPU_SRAM_WRDAT			0x019C
+
+/* SRAM RTC/WTC Control Register */
+#define LCD_SPU_SRAM_PARA0			0x01A0
+
+/* SRAM Power Down Control Register */
+#define LCD_SPU_SRAM_PARA1			0x01A4
+#define     CFG_CSB_256x32(hwc)			((hwc) << 15)	/* HWC */
+#define     CFG_CSB_256x32_MASK			0x00008000
+#define     CFG_CSB_256x24(palette)		((palette) << 14)	/* Palette */
+#define     CFG_CSB_256x24_MASK			0x00004000
+#define     CFG_CSB_256x8(gamma)		((gamma) << 13)	/* Gamma */
+#define     CFG_CSB_256x8_MASK			0x00002000
+#define     CFG_PDWN256x32(pdwn)		((pdwn) << 7)	/* HWC */
+#define     CFG_PDWN256x32_MASK			0x00000080
+#define     CFG_PDWN256x24(pdwn)		((pdwn) << 6)	/* Palette */
+#define     CFG_PDWN256x24_MASK			0x00000040
+#define     CFG_PDWN256x8(pdwn)			((pdwn) << 5)	/* Gamma */
+#define     CFG_PDWN256x8_MASK			0x00000020
+#define     CFG_PDWN32x32(pdwn)			((pdwn) << 3)
+#define     CFG_PDWN32x32_MASK			0x00000008
+#define     CFG_PDWN16x66(pdwn)			((pdwn) << 2)
+#define     CFG_PDWN16x66_MASK			0x00000004
+#define     CFG_PDWN32x66(pdwn)			((pdwn) << 1)
+#define     CFG_PDWN32x66_MASK			0x00000002
+#define     CFG_PDWN64x66(pdwn)			(pdwn)
+#define     CFG_PDWN64x66_MASK			0x00000001
+
+/* Smart or Dumb Panel Clock Divider */
+#define LCD_CFG_SCLK_DIV			0x01A8
+#define     SCLK_SOURCE_SELECT(src)		((src) << 31)
+#define     SCLK_SOURCE_SELECT_MASK		0x80000000
+#define     CLK_FRACDIV(frac)			((frac) << 16)
+#define     CLK_FRACDIV_MASK			0x0FFF0000
+#define     CLK_INT_DIV(div)			(div)
+#define     CLK_INT_DIV_MASK			0x0000FFFF
+
+/* Video Contrast Register */
+#define LCD_SPU_CONTRAST			0x01AC
+#define     CFG_BRIGHTNESS(bright)		((bright) << 16)
+#define     CFG_BRIGHTNESS_MASK			0xFFFF0000
+#define     CFG_CONTRAST(contrast)		(contrast)
+#define     CFG_CONTRAST_MASK			0x0000FFFF
+
+/* Video Saturation Register */
+#define LCD_SPU_SATURATION			0x01B0
+#define     CFG_C_MULTS(mult)			((mult) << 16)
+#define     CFG_C_MULTS_MASK			0xFFFF0000
+#define     CFG_SATURATION(sat)			(sat)
+#define     CFG_SATURATION_MASK			0x0000FFFF
+
+/* Video Hue Adjust Register */
+#define LCD_SPU_CBSH_HUE			0x01B4
+#define     CFG_SIN0(sin0)			((sin0) << 16)
+#define     CFG_SIN0_MASK			0xFFFF0000
+#define     CFG_COS0(con0)			(con0)
+#define     CFG_COS0_MASK			0x0000FFFF
+
+/* Dump LCD Panel Control Register */
+#define LCD_SPU_DUMB_CTRL			0x01B8
+#define     CFG_DUMBMODE(mode)			((mode) << 28)
+#define     CFG_DUMBMODE_MASK			0xF0000000
+#define     CFG_LCDGPIO_O(data)			((data) << 20)
+#define     CFG_LCDGPIO_O_MASK			0x0FF00000
+#define     CFG_LCDGPIO_ENA(gpio)		((gpio) << 12)
+#define     CFG_LCDGPIO_ENA_MASK		0x000FF000
+#define     CFG_BIAS_OUT(bias)			((bias) << 8)
+#define     CFG_BIAS_OUT_MASK			0x00000100
+#define     CFG_REVERSE_RGB(rRGB)		((rRGB) << 7)
+#define     CFG_REVERSE_RGB_MASK		0x00000080
+#define     CFG_INV_COMPBLANK(blank)		((blank) << 6)
+#define     CFG_INV_COMPBLANK_MASK		0x00000040
+#define     CFG_INV_COMPSYNC(sync)		((sync) << 5)
+#define     CFG_INV_COMPSYNC_MASK		0x00000020
+#define     CFG_INV_HENA(hena)			((hena) << 4)
+#define     CFG_INV_HENA_MASK			0x00000010
+#define     CFG_INV_VSYNC(vsync)		((vsync) << 3)
+#define     CFG_INV_VSYNC_MASK			0x00000008
+#define     CFG_INV_HSYNC(hsync)		((hsync) << 2)
+#define     CFG_INV_HSYNC_MASK			0x00000004
+#define     CFG_INV_PCLK(pclk)			((pclk) << 1)
+#define     CFG_INV_PCLK_MASK			0x00000002
+#define     CFG_DUMB_ENA(dumb)			(dumb)
+#define     CFG_DUMB_ENA_MASK			0x00000001
+
+/* LCD I/O Pads Control Register */
+#define SPU_IOPAD_CONTROL			0x01BC
+#define     CFG_GRA_VM_ENA(vm)			((vm) << 15)        /* gfx */
+#define     CFG_GRA_VM_ENA_MASK			0x00008000
+#define     CFG_DMA_VM_ENA(vm)			((vm) << 13)	/* video */
+#define     CFG_DMA_VM_ENA_MASK			0x00002000
+#define     CFG_CMD_VM_ENA(vm)			((vm) << 13)
+#define     CFG_CMD_VM_ENA_MASK			0x00000800
+#define     CFG_CSC(csc)			((csc) << 8)	/* csc */
+#define     CFG_CSC_MASK			0x00000300
+#define     CFG_AXICTRL(axi)			((axi) << 4)
+#define     CFG_AXICTRL_MASK			0x000000F0
+#define     CFG_IOPADMODE(iopad)		(iopad)
+#define     CFG_IOPADMODE_MASK			0x0000000F
+
+/* LCD Interrupt Control Register */
+#define SPU_IRQ_ENA				0x01C0
+#define     DMA_FRAME_IRQ0_ENA(irq)		((irq) << 31)
+#define     DMA_FRAME_IRQ0_ENA_MASK		0x80000000
+#define     DMA_FRAME_IRQ1_ENA(irq)		((irq) << 30)
+#define     DMA_FRAME_IRQ1_ENA_MASK		0x40000000
+#define     DMA_FF_UNDERFLOW_ENA(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_ENA_MASK		0x20000000
+#define     GRA_FRAME_IRQ0_ENA(irq)		((irq) << 27)
+#define     GRA_FRAME_IRQ0_ENA_MASK		0x08000000
+#define     GRA_FRAME_IRQ1_ENA(irq)		((irq) << 26)
+#define     GRA_FRAME_IRQ1_ENA_MASK		0x04000000
+#define     GRA_FF_UNDERFLOW_ENA(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_ENA_MASK		0x02000000
+#define     VSYNC_IRQ_ENA(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_ENA_MASK			0x00800000
+#define     DUMB_FRAMEDONE_ENA(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_ENA_MASK		0x00400000
+#define     TWC_FRAMEDONE_ENA(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_ENA_MASK		0x00200000
+#define     HWC_FRAMEDONE_ENA(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_ENA_MASK		0x00100000
+#define     SLV_IRQ_ENA(irq)			((irq) << 19)
+#define     SLV_IRQ_ENA_MASK			0x00080000
+#define     SPI_IRQ_ENA(irq)			((irq) << 18)
+#define     SPI_IRQ_ENA_MASK			0x00040000
+#define     PWRDN_IRQ_ENA(irq)			((irq) << 17)
+#define     PWRDN_IRQ_ENA_MASK			0x00020000
+#define     ERR_IRQ_ENA(irq)			((irq) << 16)
+#define     ERR_IRQ_ENA_MASK			0x00010000
+#define     CLEAN_SPU_IRQ_ISR(irq)		(irq)
+#define     CLEAN_SPU_IRQ_ISR_MASK		0x0000FFFF
+
+/* LCD Interrupt Status Register */
+#define SPU_IRQ_ISR				0x01C4
+#define     DMA_FRAME_IRQ0(irq)			((irq) << 31)
+#define     DMA_FRAME_IRQ0_MASK			0x80000000
+#define     DMA_FRAME_IRQ1(irq)			((irq) << 30)
+#define     DMA_FRAME_IRQ1_MASK			0x40000000
+#define     DMA_FF_UNDERFLOW(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_MASK		0x20000000
+#define     GRA_FRAME_IRQ0(irq)			((irq) << 27)
+#define     GRA_FRAME_IRQ0_MASK			0x08000000
+#define     GRA_FRAME_IRQ1(irq)			((irq) << 26)
+#define     GRA_FRAME_IRQ1_MASK			0x04000000
+#define     GRA_FF_UNDERFLOW(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_MASK		0x02000000
+#define     VSYNC_IRQ(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_MASK			0x00800000
+#define     DUMB_FRAMEDONE(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_MASK			0x00400000
+#define     TWC_FRAMEDONE(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_MASK			0x00200000
+#define     HWC_FRAMEDONE(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_MASK			0x00100000
+#define     SLV_IRQ(irq)			((irq) << 19)
+#define     SLV_IRQ_MASK			0x00080000
+#define     SPI_IRQ(irq)			((irq) << 18)
+#define     SPI_IRQ_MASK			0x00040000
+#define     PWRDN_IRQ(irq)			((irq) << 17)
+#define     PWRDN_IRQ_MASK			0x00020000
+#define     ERR_IRQ(irq)			((irq) << 16)
+#define     ERR_IRQ_MASK			0x00010000
+/* read-only */
+#define     DMA_FRAME_IRQ0_LEVEL_MASK		0x00008000
+#define     DMA_FRAME_IRQ1_LEVEL_MASK		0x00004000
+#define     DMA_FRAME_CNT_ISR_MASK		0x00003000
+#define     GRA_FRAME_IRQ0_LEVEL_MASK		0x00000800
+#define     GRA_FRAME_IRQ1_LEVEL_MASK		0x00000400
+#define     GRA_FRAME_CNT_ISR_MASK		0x00000300
+#define     VSYNC_IRQ_LEVEL_MASK		0x00000080
+#define     DUMB_FRAMEDONE_LEVEL_MASK		0x00000040
+#define     TWC_FRAMEDONE_LEVEL_MASK		0x00000020
+#define     HWC_FRAMEDONE_LEVEL_MASK		0x00000010
+#define     SLV_FF_EMPTY_MASK			0x00000008
+#define     DMA_FF_ALLEMPTY_MASK		0x00000004
+#define     GRA_FF_ALLEMPTY_MASK		0x00000002
+#define     PWRDN_IRQ_LEVEL_MASK		0x00000001
+
+
+/*
+ * defined Video Memory Color format for DMA control 0 register
+ * DMA0 bit[23:20]
+ */
+#define VMODE_RGB565		0x0
+#define VMODE_RGB1555		0x1
+#define VMODE_RGB888PACKED	0x2
+#define VMODE_RGB888UNPACKED	0x3
+#define VMODE_RGBA888		0x4
+#define VMODE_YUV422PACKED	0x5
+#define VMODE_YUV422PLANAR	0x6
+#define VMODE_YUV420PLANAR	0x7
+#define VMODE_SMPNCMD		0x8
+#define VMODE_PALETTE4BIT	0x9
+#define VMODE_PALETTE8BIT	0xa
+#define VMODE_RESERVED		0xb
+
+/*
+ * defined Graphic Memory Color format for DMA control 0 register
+ * DMA0 bit[19:16]
+ */
+#define GMODE_RGB565		0x0
+#define GMODE_RGB1555		0x1
+#define GMODE_RGB888PACKED	0x2
+#define GMODE_RGB888UNPACKED	0x3
+#define GMODE_RGBA888		0x4
+#define GMODE_YUV422PACKED	0x5
+#define GMODE_YUV422PLANAR	0x6
+#define GMODE_YUV420PLANAR	0x7
+#define GMODE_SMPNCMD		0x8
+#define GMODE_PALETTE4BIT	0x9
+#define GMODE_PALETTE8BIT	0xa
+#define GMODE_RESERVED		0xb
+
+/*
+ * define for DMA control 1 register
+ */
+#define DMA1_FRAME_TRIG		31 /* bit location */
+#define DMA1_VSYNC_MODE		28
+#define DMA1_VSYNC_INV		27
+#define DMA1_CKEY		24
+#define DMA1_CARRY		23
+#define DMA1_LNBUF_ENA		22
+#define DMA1_GATED_ENA		21
+#define DMA1_PWRDN_ENA		20
+#define DMA1_DSCALE		18
+#define DMA1_ALPHA_MODE		16
+#define DMA1_ALPHA		08
+#define DMA1_PXLCMD		00
+
+/*
+ * defined for Configure Dumb Mode
+ * DUMB LCD Panel bit[31:28]
+ */
+#define DUMB16_RGB565_0		0x0
+#define DUMB16_RGB565_1		0x1
+#define DUMB18_RGB666_0		0x2
+#define DUMB18_RGB666_1		0x3
+#define DUMB12_RGB444_0		0x4
+#define DUMB12_RGB444_1		0x5
+#define DUMB24_RGB888_0		0x6
+#define DUMB_BLANK		0x7
+
+/*
+ * defined for Configure I/O Pin Allocation Mode
+ * LCD LCD I/O Pads control register bit[3:0]
+ */
+#define IOPAD_DUMB24		0x0
+#define IOPAD_DUMB18SPI		0x1
+#define IOPAD_DUMB18GPIO	0x2
+#define IOPAD_DUMB16SPI		0x3
+#define IOPAD_DUMB16GPIO	0x4
+#define IOPAD_DUMB12		0x5
+#define IOPAD_SMART18SPI	0x6
+#define IOPAD_SMART16SPI	0x7
+#define IOPAD_SMART8BOTH	0x8
+
+#endif /* __PXA168FB_H__ */
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5e9c6302433..d3a568e6b16 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -947,7 +947,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 	int win;
 
 	for (win = 0; win <= S3C_FB_MAX_WIN; win++)
-		s3c_fb_release_win(sfb, sfb->windows[win]);
+		if (sfb->windows[win])
+			s3c_fb_release_win(sfb, sfb->windows[win]);
 
 	iounmap(sfb->regs);
 
@@ -985,11 +986,20 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
 static int s3c_fb_resume(struct platform_device *pdev)
 {
 	struct s3c_fb *sfb = platform_get_drvdata(pdev);
+	struct s3c_fb_platdata *pd = sfb->pdata;
 	struct s3c_fb_win *win;
 	int win_no;
 
 	clk_enable(sfb->bus_clk);
 
+	/* setup registers */
+	writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+	/* zero all windows before we do anything */
+	for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+		s3c_fb_clear_win(sfb, win_no);
+
+	/* restore framebuffers */
 	for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
 		win = sfb->windows[win_no];
 		if (!win)
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 92ea0ab44ce..f10d2fbeda0 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -47,6 +47,7 @@ struct sh_mobile_lcdc_priv {
 #endif
 	unsigned long lddckr;
 	struct sh_mobile_lcdc_chan ch[2];
+	int started;
 };
 
 /* shared registers */
@@ -451,6 +452,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 	/* start the lcdc */
 	sh_mobile_lcdc_start_stop(priv, 1);
+	priv->started = 1;
 
 	/* tell the board code to enable the panel */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
@@ -493,7 +495,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 	}
 
 	/* stop the lcdc */
-	sh_mobile_lcdc_start_stop(priv, 0);
+	if (priv->started) {
+		sh_mobile_lcdc_start_stop(priv, 0);
+		priv->started = 0;
+	}
 
 	/* stop clocks */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 421770b5e6a..ca5b4643a40 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -45,7 +45,7 @@ static struct fb_fix_screeninfo uvesafb_fix __devinitdata = {
 static int mtrr		__devinitdata = 3; /* enable mtrr by default */
 static int blank	= 1;		   /* enable blanking by default */
 static int ypan		= 1; 		 /* 0: scroll, 1: ypan, 2: ywrap */
-static int pmi_setpal	__devinitdata = 1; /* use PMI for palette changes */
+static bool pmi_setpal	__devinitdata = true; /* use PMI for palette changes */
 static int nocrtc	__devinitdata; /* ignore CRTC settings */
 static int noedid	__devinitdata; /* don't try DDC transfers */
 static int vram_remap	__devinitdata; /* set amt. of memory to be used */
@@ -2002,11 +2002,7 @@ static void __devexit uvesafb_exit(void)
 
 module_exit(uvesafb_exit);
 
-static int param_get_scroll(char *buffer, struct kernel_param *kp)
-{
-	return 0;
-}
-
+#define param_get_scroll NULL
 static int param_set_scroll(const char *val, struct kernel_param *kp)
 {
 	ypan = 0;
@@ -2017,6 +2013,8 @@ static int param_set_scroll(const char *val, struct kernel_param *kp)
 		ypan = 1;
 	else if (!strcmp(val, "ywrap"))
 		ypan = 2;
+	else
+		return -EINVAL;
 
 	return 0;
 }
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 018c070a357..3a43ebf83a4 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -31,21 +31,37 @@ static ssize_t modalias_show(struct device *_d,
 	return sprintf(buf, "virtio:d%08Xv%08X\n",
 		       dev->id.device, dev->id.vendor);
 }
+static ssize_t features_show(struct device *_d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct virtio_device *dev = container_of(_d, struct virtio_device, dev);
+	unsigned int i;
+	ssize_t len = 0;
+
+	/* We actually represent this as a bitstring, as it could be
+	 * arbitrary length in future. */
+	for (i = 0; i < ARRAY_SIZE(dev->features)*BITS_PER_LONG; i++)
+		len += sprintf(buf+len, "%c",
+			       test_bit(i, dev->features) ? '1' : '0');
+	len += sprintf(buf+len, "\n");
+	return len;
+}
 static struct device_attribute virtio_dev_attrs[] = {
 	__ATTR_RO(device),
 	__ATTR_RO(vendor),
 	__ATTR_RO(status),
 	__ATTR_RO(modalias),
+	__ATTR_RO(features),
 	__ATTR_NULL
 };
 
 static inline int virtio_id_match(const struct virtio_device *dev,
 				  const struct virtio_device_id *id)
 {
-	if (id->device != dev->id.device)
+	if (id->device != dev->id.device && id->device != VIRTIO_DEV_ANY_ID)
 		return 0;
 
-	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor != dev->id.vendor;
+	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor == dev->id.vendor;
 }
 
 /* This looks through all the IDs a driver claims to support.  If any of them
@@ -118,13 +134,14 @@ static int virtio_dev_probe(struct device *_d)
 		if (device_features & (1 << i))
 			set_bit(i, dev->features);
 
+	dev->config->finalize_features(dev);
+
 	err = drv->probe(dev);
 	if (err)
 		add_status(dev, VIRTIO_CONFIG_S_FAILED);
-	else {
-		dev->config->finalize_features(dev);
+	else
 		add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
-	}
+
 	return err;
 }
 
@@ -185,6 +202,8 @@ int register_virtio_device(struct virtio_device *dev)
 	/* Acknowledge that we've seen the device. */
 	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 
+	INIT_LIST_HEAD(&dev->vqs);
+
 	/* device_register() causes the bus infrastructure to look for a
 	 * matching driver. */
 	err = device_register(&dev->dev);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 9c76a061a04..26b27826479 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -204,6 +204,9 @@ static int balloon(void *_vballoon)
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
+	struct virtqueue *vqs[2];
+	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack };
+	const char *names[] = { "inflate", "deflate" };
 	int err;
 
 	vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
@@ -218,22 +221,17 @@ static int virtballoon_probe(struct virtio_device *vdev)
 	vb->vdev = vdev;
 
 	/* We expect two virtqueues. */
-	vb->inflate_vq = vdev->config->find_vq(vdev, 0, balloon_ack);
-	if (IS_ERR(vb->inflate_vq)) {
-		err = PTR_ERR(vb->inflate_vq);
+	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	if (err)
 		goto out_free_vb;
-	}
 
-	vb->deflate_vq = vdev->config->find_vq(vdev, 1, balloon_ack);
-	if (IS_ERR(vb->deflate_vq)) {
-		err = PTR_ERR(vb->deflate_vq);
-		goto out_del_inflate_vq;
-	}
+	vb->inflate_vq = vqs[0];
+	vb->deflate_vq = vqs[1];
 
 	vb->thread = kthread_run(balloon, vb, "vballoon");
 	if (IS_ERR(vb->thread)) {
 		err = PTR_ERR(vb->thread);
-		goto out_del_deflate_vq;
+		goto out_del_vqs;
 	}
 
 	vb->tell_host_first
@@ -241,10 +239,8 @@ static int virtballoon_probe(struct virtio_device *vdev)
 
 	return 0;
 
-out_del_deflate_vq:
-	vdev->config->del_vq(vb->deflate_vq);
-out_del_inflate_vq:
-	vdev->config->del_vq(vb->inflate_vq);
+out_del_vqs:
+	vdev->config->del_vqs(vdev);
 out_free_vb:
 	kfree(vb);
 out:
@@ -264,8 +260,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
 	/* Now we reset the device so we can clean up the queues. */
 	vdev->config->reset(vdev);
 
-	vdev->config->del_vq(vb->deflate_vq);
-	vdev->config->del_vq(vb->inflate_vq);
+	vdev->config->del_vqs(vdev);
 	kfree(vb);
 }
 
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 330aacbdec1..193c8f0e5cc 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -42,6 +42,26 @@ struct virtio_pci_device
 	/* a list of queues so we can dispatch IRQs */
 	spinlock_t lock;
 	struct list_head virtqueues;
+
+	/* MSI-X support */
+	int msix_enabled;
+	int intx_enabled;
+	struct msix_entry *msix_entries;
+	/* Name strings for interrupts. This size should be enough,
+	 * and I'm too lazy to allocate each name separately. */
+	char (*msix_names)[256];
+	/* Number of available vectors */
+	unsigned msix_vectors;
+	/* Vectors allocated */
+	unsigned msix_used_vectors;
+};
+
+/* Constants for MSI-X */
+/* Use first vector for configuration changes, second and the rest for
+ * virtqueues Thus, we need at least 2 vectors for MSI. */
+enum {
+	VP_MSIX_CONFIG_VECTOR = 0,
+	VP_MSIX_VQ_VECTOR = 1,
 };
 
 struct virtio_pci_vq_info
@@ -60,6 +80,9 @@ struct virtio_pci_vq_info
 
 	/* the list node for the virtqueues list */
 	struct list_head node;
+
+	/* MSI-X vector (or none) */
+	unsigned vector;
 };
 
 /* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
@@ -109,7 +132,8 @@ static void vp_get(struct virtio_device *vdev, unsigned offset,
 		   void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
 	u8 *ptr = buf;
 	int i;
 
@@ -123,7 +147,8 @@ static void vp_set(struct virtio_device *vdev, unsigned offset,
 		   const void *buf, unsigned len)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
-	void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	void __iomem *ioaddr = vp_dev->ioaddr +
+				VIRTIO_PCI_CONFIG(vp_dev) + offset;
 	const u8 *ptr = buf;
 	int i;
 
@@ -164,6 +189,37 @@ static void vp_notify(struct virtqueue *vq)
 	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
 }
 
+/* Handle a configuration change: Tell driver if it wants to know. */
+static irqreturn_t vp_config_changed(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	struct virtio_driver *drv;
+	drv = container_of(vp_dev->vdev.dev.driver,
+			   struct virtio_driver, driver);
+
+	if (drv && drv->config_changed)
+		drv->config_changed(&vp_dev->vdev);
+	return IRQ_HANDLED;
+}
+
+/* Notify all virtqueues on an interrupt. */
+static irqreturn_t vp_vring_interrupt(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	struct virtio_pci_vq_info *info;
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vp_dev->lock, flags);
+	list_for_each_entry(info, &vp_dev->virtqueues, node) {
+		if (vring_interrupt(irq, info->vq) == IRQ_HANDLED)
+			ret = IRQ_HANDLED;
+	}
+	spin_unlock_irqrestore(&vp_dev->lock, flags);
+
+	return ret;
+}
+
 /* A small wrapper to also acknowledge the interrupt when it's handled.
  * I really need an EIO hook for the vring so I can ack the interrupt once we
  * know that we'll be handling the IRQ but before we invoke the callback since
@@ -173,9 +229,6 @@ static void vp_notify(struct virtqueue *vq)
 static irqreturn_t vp_interrupt(int irq, void *opaque)
 {
 	struct virtio_pci_device *vp_dev = opaque;
-	struct virtio_pci_vq_info *info;
-	irqreturn_t ret = IRQ_NONE;
-	unsigned long flags;
 	u8 isr;
 
 	/* reading the ISR has the effect of also clearing it so it's very
@@ -187,34 +240,137 @@ static irqreturn_t vp_interrupt(int irq, void *opaque)
 		return IRQ_NONE;
 
 	/* Configuration change?  Tell driver if it wants to know. */
-	if (isr & VIRTIO_PCI_ISR_CONFIG) {
-		struct virtio_driver *drv;
-		drv = container_of(vp_dev->vdev.dev.driver,
-				   struct virtio_driver, driver);
+	if (isr & VIRTIO_PCI_ISR_CONFIG)
+		vp_config_changed(irq, opaque);
 
-		if (drv && drv->config_changed)
-			drv->config_changed(&vp_dev->vdev);
+	return vp_vring_interrupt(irq, opaque);
+}
+
+static void vp_free_vectors(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	int i;
+
+	if (vp_dev->intx_enabled) {
+		free_irq(vp_dev->pci_dev->irq, vp_dev);
+		vp_dev->intx_enabled = 0;
 	}
 
-	spin_lock_irqsave(&vp_dev->lock, flags);
-	list_for_each_entry(info, &vp_dev->virtqueues, node) {
-		if (vring_interrupt(irq, info->vq) == IRQ_HANDLED)
-			ret = IRQ_HANDLED;
+	for (i = 0; i < vp_dev->msix_used_vectors; ++i)
+		free_irq(vp_dev->msix_entries[i].vector, vp_dev);
+	vp_dev->msix_used_vectors = 0;
+
+	if (vp_dev->msix_enabled) {
+		/* Disable the vector used for configuration */
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		/* Flush the write out to device */
+		ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+
+		vp_dev->msix_enabled = 0;
+		pci_disable_msix(vp_dev->pci_dev);
 	}
-	spin_unlock_irqrestore(&vp_dev->lock, flags);
+}
 
-	return ret;
+static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
+			  int *options, int noptions)
+{
+	int i;
+	for (i = 0; i < noptions; ++i)
+		if (!pci_enable_msix(dev, entries, options[i]))
+			return options[i];
+	return -EBUSY;
+}
+
+static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	const char *name = dev_name(&vp_dev->vdev.dev);
+	unsigned i, v;
+	int err = -ENOMEM;
+	/* We want at most one vector per queue and one for config changes.
+	 * Fallback to separate vectors for config and a shared for queues.
+	 * Finally fall back to regular interrupts. */
+	int options[] = { max_vqs + 1, 2 };
+	int nvectors = max(options[0], options[1]);
+
+	vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
+				       GFP_KERNEL);
+	if (!vp_dev->msix_entries)
+		goto error_entries;
+	vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
+				     GFP_KERNEL);
+	if (!vp_dev->msix_names)
+		goto error_names;
+
+	for (i = 0; i < nvectors; ++i)
+		vp_dev->msix_entries[i].entry = i;
+
+	err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
+			     options, ARRAY_SIZE(options));
+	if (err < 0) {
+		/* Can't allocate enough MSI-X vectors, use regular interrupt */
+		vp_dev->msix_vectors = 0;
+		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+				  IRQF_SHARED, name, vp_dev);
+		if (err)
+			goto error_irq;
+		vp_dev->intx_enabled = 1;
+	} else {
+		vp_dev->msix_vectors = err;
+		vp_dev->msix_enabled = 1;
+
+		/* Set the vector used for configuration */
+		v = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+			 "%s-config", name);
+		err = request_irq(vp_dev->msix_entries[v].vector,
+				  vp_config_changed, 0, vp_dev->msix_names[v],
+				  vp_dev);
+		if (err)
+			goto error_irq;
+		++vp_dev->msix_used_vectors;
+
+		iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		/* Verify we had enough resources to assign the vector */
+		v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+		if (v == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto error_irq;
+		}
+	}
+
+	if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+		/* Shared vector for all VQs */
+		v = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+			 "%s-virtqueues", name);
+		err = request_irq(vp_dev->msix_entries[v].vector,
+				  vp_vring_interrupt, 0, vp_dev->msix_names[v],
+				  vp_dev);
+		if (err)
+			goto error_irq;
+		++vp_dev->msix_used_vectors;
+	}
+	return 0;
+error_irq:
+	vp_free_vectors(vdev);
+	kfree(vp_dev->msix_names);
+error_names:
+	kfree(vp_dev->msix_entries);
+error_entries:
+	return err;
 }
 
-/* the config->find_vq() implementation */
 static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
-				    void (*callback)(struct virtqueue *vq))
+				    void (*callback)(struct virtqueue *vq),
+				    const char *name)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtio_pci_vq_info *info;
 	struct virtqueue *vq;
 	unsigned long flags, size;
-	u16 num;
+	u16 num, vector;
 	int err;
 
 	/* Select the queue we're interested in */
@@ -233,6 +389,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
 	info->queue_index = index;
 	info->num = num;
+	info->vector = VIRTIO_MSI_NO_VECTOR;
 
 	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
 	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -247,7 +404,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
 	/* create the vring */
 	vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN,
-				 vdev, info->queue, vp_notify, callback);
+				 vdev, info->queue, vp_notify, callback, name);
 	if (!vq) {
 		err = -ENOMEM;
 		goto out_activate_queue;
@@ -256,12 +413,43 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 	vq->priv = info;
 	info->vq = vq;
 
+	/* allocate per-vq vector if available and necessary */
+	if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
+		vector = vp_dev->msix_used_vectors;
+		snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+			 "%s-%s", dev_name(&vp_dev->vdev.dev), name);
+		err = request_irq(vp_dev->msix_entries[vector].vector,
+				  vring_interrupt, 0,
+				  vp_dev->msix_names[vector], vq);
+		if (err)
+			goto out_request_irq;
+		info->vector = vector;
+		++vp_dev->msix_used_vectors;
+	} else
+		vector = VP_MSIX_VQ_VECTOR;
+
+	 if (callback && vp_dev->msix_enabled) {
+		iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		if (vector == VIRTIO_MSI_NO_VECTOR) {
+			err = -EBUSY;
+			goto out_assign;
+		}
+	}
+
 	spin_lock_irqsave(&vp_dev->lock, flags);
 	list_add(&info->node, &vp_dev->virtqueues);
 	spin_unlock_irqrestore(&vp_dev->lock, flags);
 
 	return vq;
 
+out_assign:
+	if (info->vector != VIRTIO_MSI_NO_VECTOR) {
+		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+		--vp_dev->msix_used_vectors;
+	}
+out_request_irq:
+	vring_del_virtqueue(vq);
 out_activate_queue:
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 	free_pages_exact(info->queue, size);
@@ -270,21 +458,27 @@ out_info:
 	return ERR_PTR(err);
 }
 
-/* the config->del_vq() implementation */
 static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
 	struct virtio_pci_vq_info *info = vq->priv;
-	unsigned long flags, size;
+	unsigned long size;
 
-	spin_lock_irqsave(&vp_dev->lock, flags);
-	list_del(&info->node);
-	spin_unlock_irqrestore(&vp_dev->lock, flags);
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+
+	if (info->vector != VIRTIO_MSI_NO_VECTOR)
+		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+
+	if (vp_dev->msix_enabled) {
+		iowrite16(VIRTIO_MSI_NO_VECTOR,
+			  vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
+		/* Flush the write out to device */
+		ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+	}
 
 	vring_del_virtqueue(vq);
 
 	/* Select and deactivate the queue */
-	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
 
 	size = PAGE_ALIGN(vring_size(info->num, VIRTIO_PCI_VRING_ALIGN));
@@ -292,14 +486,57 @@ static void vp_del_vq(struct virtqueue *vq)
 	kfree(info);
 }
 
+/* the config->del_vqs() implementation */
+static void vp_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		vp_del_vq(vq);
+
+	vp_free_vectors(vdev);
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	int vectors = 0;
+	int i, err;
+
+	/* How many vectors would we like? */
+	for (i = 0; i < nvqs; ++i)
+		if (callbacks[i])
+			++vectors;
+
+	err = vp_request_vectors(vdev, vectors);
+	if (err)
+		goto error_request;
+
+	for (i = 0; i < nvqs; ++i) {
+		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
+		if (IS_ERR(vqs[i]))
+			goto error_find;
+	}
+	return 0;
+
+error_find:
+	vp_del_vqs(vdev);
+
+error_request:
+	return PTR_ERR(vqs[i]);
+}
+
 static struct virtio_config_ops virtio_pci_config_ops = {
 	.get		= vp_get,
 	.set		= vp_set,
 	.get_status	= vp_get_status,
 	.set_status	= vp_set_status,
 	.reset		= vp_reset,
-	.find_vq	= vp_find_vq,
-	.del_vq		= vp_del_vq,
+	.find_vqs	= vp_find_vqs,
+	.del_vqs	= vp_del_vqs,
 	.get_features	= vp_get_features,
 	.finalize_features = vp_finalize_features,
 };
@@ -310,7 +547,7 @@ static void virtio_pci_release_dev(struct device *_d)
 	struct virtio_pci_device *vp_dev = to_vp_device(dev);
 	struct pci_dev *pci_dev = vp_dev->pci_dev;
 
-	free_irq(pci_dev->irq, vp_dev);
+	vp_del_vqs(dev);
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
 	pci_release_regions(pci_dev);
@@ -369,21 +606,13 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
 	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
 	vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
-	/* register a handler for the queue with the PCI device's interrupt */
-	err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, IRQF_SHARED,
-			  dev_name(&vp_dev->vdev.dev), vp_dev);
-	if (err)
-		goto out_set_drvdata;
-
 	/* finally register the virtio device */
 	err = register_virtio_device(&vp_dev->vdev);
 	if (err)
-		goto out_req_irq;
+		goto out_set_drvdata;
 
 	return 0;
 
-out_req_irq:
-	free_irq(pci_dev->irq, vp_dev);
 out_set_drvdata:
 	pci_set_drvdata(pci_dev, NULL);
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5c52369ab9b..a882f260651 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -23,21 +23,30 @@
 
 #ifdef DEBUG
 /* For development, we want to crash whenever the ring is screwed. */
-#define BAD_RING(_vq, fmt...)			\
-	do { dev_err(&(_vq)->vq.vdev->dev, fmt); BUG(); } while(0)
+#define BAD_RING(_vq, fmt, args...)				\
+	do {							\
+		dev_err(&(_vq)->vq.vdev->dev,			\
+			"%s:"fmt, (_vq)->vq.name, ##args);	\
+		BUG();						\
+	} while (0)
 /* Caller is supposed to guarantee no reentry. */
 #define START_USE(_vq)						\
 	do {							\
 		if ((_vq)->in_use)				\
-			panic("in_use = %i\n", (_vq)->in_use);	\
+			panic("%s:in_use = %i\n",		\
+			      (_vq)->vq.name, (_vq)->in_use);	\
 		(_vq)->in_use = __LINE__;			\
 		mb();						\
-	} while(0)
+	} while (0)
 #define END_USE(_vq) \
 	do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0)
 #else
-#define BAD_RING(_vq, fmt...)			\
-	do { dev_err(&_vq->vq.vdev->dev, fmt); (_vq)->broken = true; } while(0)
+#define BAD_RING(_vq, fmt, args...)				\
+	do {							\
+		dev_err(&_vq->vq.vdev->dev,			\
+			"%s:"fmt, (_vq)->vq.name, ##args);	\
+		(_vq)->broken = true;				\
+	} while (0)
 #define START_USE(vq)
 #define END_USE(vq)
 #endif
@@ -52,6 +61,9 @@ struct vring_virtqueue
 	/* Other side has made a mess, don't try any more. */
 	bool broken;
 
+	/* Host supports indirect buffers */
+	bool indirect;
+
 	/* Number of free buffers */
 	unsigned int num_free;
 	/* Head of free buffer list. */
@@ -76,6 +88,55 @@ struct vring_virtqueue
 
 #define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
 
+/* Set up an indirect table of descriptors and add it to the queue. */
+static int vring_add_indirect(struct vring_virtqueue *vq,
+			      struct scatterlist sg[],
+			      unsigned int out,
+			      unsigned int in)
+{
+	struct vring_desc *desc;
+	unsigned head;
+	int i;
+
+	desc = kmalloc((out + in) * sizeof(struct vring_desc), GFP_ATOMIC);
+	if (!desc)
+		return vq->vring.num;
+
+	/* Transfer entries from the sg list into the indirect page */
+	for (i = 0; i < out; i++) {
+		desc[i].flags = VRING_DESC_F_NEXT;
+		desc[i].addr = sg_phys(sg);
+		desc[i].len = sg->length;
+		desc[i].next = i+1;
+		sg++;
+	}
+	for (; i < (out + in); i++) {
+		desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
+		desc[i].addr = sg_phys(sg);
+		desc[i].len = sg->length;
+		desc[i].next = i+1;
+		sg++;
+	}
+
+	/* Last one doesn't continue. */
+	desc[i-1].flags &= ~VRING_DESC_F_NEXT;
+	desc[i-1].next = 0;
+
+	/* We're about to use a buffer */
+	vq->num_free--;
+
+	/* Use a single buffer which doesn't continue */
+	head = vq->free_head;
+	vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT;
+	vq->vring.desc[head].addr = virt_to_phys(desc);
+	vq->vring.desc[head].len = i * sizeof(struct vring_desc);
+
+	/* Update free pointer */
+	vq->free_head = vq->vring.desc[head].next;
+
+	return head;
+}
+
 static int vring_add_buf(struct virtqueue *_vq,
 			 struct scatterlist sg[],
 			 unsigned int out,
@@ -85,12 +146,21 @@ static int vring_add_buf(struct virtqueue *_vq,
 	struct vring_virtqueue *vq = to_vvq(_vq);
 	unsigned int i, avail, head, uninitialized_var(prev);
 
+	START_USE(vq);
+
 	BUG_ON(data == NULL);
+
+	/* If the host supports indirect descriptor tables, and we have multiple
+	 * buffers, then go indirect. FIXME: tune this threshold */
+	if (vq->indirect && (out + in) > 1 && vq->num_free) {
+		head = vring_add_indirect(vq, sg, out, in);
+		if (head != vq->vring.num)
+			goto add_head;
+	}
+
 	BUG_ON(out + in > vq->vring.num);
 	BUG_ON(out + in == 0);
 
-	START_USE(vq);
-
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
@@ -127,6 +197,7 @@ static int vring_add_buf(struct virtqueue *_vq,
 	/* Update free pointer */
 	vq->free_head = i;
 
+add_head:
 	/* Set token. */
 	vq->data[head] = data;
 
@@ -170,6 +241,11 @@ static void detach_buf(struct vring_virtqueue *vq, unsigned int head)
 
 	/* Put back on free list: find end */
 	i = head;
+
+	/* Free the indirect table */
+	if (vq->vring.desc[i].flags & VRING_DESC_F_INDIRECT)
+		kfree(phys_to_virt(vq->vring.desc[i].addr));
+
 	while (vq->vring.desc[i].flags & VRING_DESC_F_NEXT) {
 		i = vq->vring.desc[i].next;
 		vq->num_free++;
@@ -284,7 +360,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *),
-				      void (*callback)(struct virtqueue *))
+				      void (*callback)(struct virtqueue *),
+				      const char *name)
 {
 	struct vring_virtqueue *vq;
 	unsigned int i;
@@ -303,14 +380,18 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 	vq->vq.callback = callback;
 	vq->vq.vdev = vdev;
 	vq->vq.vq_ops = &vring_vq_ops;
+	vq->vq.name = name;
 	vq->notify = notify;
 	vq->broken = false;
 	vq->last_used_idx = 0;
 	vq->num_added = 0;
+	list_add_tail(&vq->vq.list, &vdev->vqs);
 #ifdef DEBUG
 	vq->in_use = false;
 #endif
 
+	vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC);
+
 	/* No callback?  Tell other side not to bother us. */
 	if (!callback)
 		vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
@@ -327,6 +408,7 @@ EXPORT_SYMBOL_GPL(vring_new_virtqueue);
 
 void vring_del_virtqueue(struct virtqueue *vq)
 {
+	list_del(&vq->list);
 	kfree(to_vvq(vq));
 }
 EXPORT_SYMBOL_GPL(vring_del_virtqueue);
@@ -338,6 +420,8 @@ void vring_transport_features(struct virtio_device *vdev)
 
 	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) {
 		switch (i) {
+		case VIRTIO_RING_F_INDIRECT_DESC:
+			break;
 		default:
 			/* We don't understand this bit. */
 			clear_bit(i, vdev->features);
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9adbb4f9047..fd2c7bd9dfb 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -8,7 +8,7 @@ menuconfig W1
 	  If you want W1 support, you should say Y here.
 
 	  This W1 support can also be built as a module.  If so, the module
-	  will be called wire.ko.
+	  will be called wire.
 
 if W1
 
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 96d2f8e4c27..3195fb8b7d9 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
 	  using Matrox's G400 GPIO pins.
 
 	  This support is also available as a module.  If so, the module
-	  will be called matrox_w1.ko.
+	  will be called matrox_w1.
 
 config W1_MASTER_DS2490
 	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
 	  for example DS9490*.
 
   	  This support is also available as a module.  If so, the module
-	  will be called ds2490.ko.
+	  will be called ds2490.
 
 config W1_MASTER_DS2482
 	tristate "Maxim DS2482 I2C to 1-Wire bridge"
@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
 	  GPIO pins. This driver uses the GPIO API to control the wire.
 
 	  This support is also available as a module.  If so, the module
-	  will be called w1-gpio.ko.
+	  will be called w1-gpio.
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21da82..b166f2852a6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -231,14 +231,14 @@ config DAVINCI_WATCHDOG
 	  NOTE: once enabled, this timer cannot be disabled.
 	  Say N if you are unsure.
 
-config ORION5X_WATCHDOG
-	tristate "Orion5x watchdog"
-	depends on ARCH_ORION5X
+config ORION_WATCHDOG
+	tristate "Orion watchdog"
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD
 	help
 	  Say Y here if to include support for the watchdog timer
-	  in the Orion5x ARM SoCs.
+	  in the Marvell Orion5x and Kirkwood ARM SoCs.
 	  To compile this driver as a module, choose M here: the
-	  module will be called orion5x_wdt.
+	  module will be called orion_wdt.
 
 # AVR32 Architecture
 
@@ -531,7 +531,7 @@ config SBC8360_WDT
 	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called sbc8360.ko.
+	  module will be called sbc8360.
 
 	  Most people will say N.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7f8c56b14f5..c3afa14d5be 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
 obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index 96eb2cbe587..0c905967669 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -192,7 +192,7 @@ static int iop_wdt_release(struct inode *inode, struct file *file)
 		if (test_bit(WDT_ENABLED, &wdt_status))
 			state = wdt_disable();
 
-	/* if the timer is not disbaled reload and notify that we are still
+	/* if the timer is not disabled reload and notify that we are still
 	 * going down
 	 */
 	if (state != 0) {
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion_wdt.c
index 2cde568e4fb..2d9fb96a9ee 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -1,7 +1,7 @@
 /*
- * drivers/watchdog/orion5x_wdt.c
+ * drivers/watchdog/orion_wdt.c
  *
- * Watchdog driver for Orion5x processors
+ * Watchdog driver for Orion/Kirkwood processors
  *
  * Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
  *
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <mach/bridge-regs.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 
 /*
  * Watchdog timer block registers.
@@ -43,7 +43,7 @@ static unsigned int wdt_tclk;
 static unsigned long wdt_status;
 static spinlock_t wdt_lock;
 
-static void orion5x_wdt_ping(void)
+static void orion_wdt_ping(void)
 {
 	spin_lock(&wdt_lock);
 
@@ -53,7 +53,7 @@ static void orion5x_wdt_ping(void)
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_enable(void)
+static void orion_wdt_enable(void)
 {
 	u32 reg;
 
@@ -73,23 +73,23 @@ static void orion5x_wdt_enable(void)
 	writel(reg, TIMER_CTRL);
 
 	/* Enable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg |= WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg |= WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_disable(void)
+static void orion_wdt_disable(void)
 {
 	u32 reg;
 
 	spin_lock(&wdt_lock);
 
 	/* Disable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg &= ~WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg &= ~WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	/* Disable watchdog timer */
 	reg = readl(TIMER_CTRL);
@@ -99,7 +99,7 @@ static void orion5x_wdt_disable(void)
 	spin_unlock(&wdt_lock);
 }
 
-static int orion5x_wdt_get_timeleft(int *time_left)
+static int orion_wdt_get_timeleft(int *time_left)
 {
 	spin_lock(&wdt_lock);
 	*time_left = readl(WDT_VAL) / wdt_tclk;
@@ -107,16 +107,16 @@ static int orion5x_wdt_get_timeleft(int *time_left)
 	return 0;
 }
 
-static int orion5x_wdt_open(struct inode *inode, struct file *file)
+static int orion_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-	orion5x_wdt_enable();
+	orion_wdt_enable();
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t orion5x_wdt_write(struct file *file, const char *data,
+static ssize_t orion_wdt_write(struct file *file, const char *data,
 					size_t len, loff_t *ppos)
 {
 	if (len) {
@@ -133,18 +133,18 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data,
 					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
 			}
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 	}
 	return len;
 }
 
-static int orion5x_wdt_settimeout(int new_time)
+static int orion_wdt_settimeout(int new_time)
 {
 	if ((new_time <= 0) || (new_time > wdt_max_duration))
 		return -EINVAL;
 
 	/* Set new watchdog time to be used when
-	 * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+	 * orion_wdt_enable() or orion_wdt_ping() is called. */
 	heartbeat = new_time;
 	return 0;
 }
@@ -152,10 +152,10 @@ static int orion5x_wdt_settimeout(int new_time)
 static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING,
-	.identity	= "Orion5x Watchdog",
+	.identity	= "Orion Watchdog",
 };
 
-static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long orion_wdt_ioctl(struct file *file, unsigned int cmd,
 				unsigned long arg)
 {
 	int ret = -ENOTTY;
@@ -173,7 +173,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_KEEPALIVE:
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		ret = 0;
 		break;
 
@@ -182,11 +182,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		if (ret)
 			break;
 
-		if (orion5x_wdt_settimeout(time)) {
+		if (orion_wdt_settimeout(time)) {
 			ret = -EINVAL;
 			break;
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		/* Fall through */
 
 	case WDIOC_GETTIMEOUT:
@@ -194,7 +194,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_GETTIMELEFT:
-		if (orion5x_wdt_get_timeleft(&time)) {
+		if (orion_wdt_get_timeleft(&time)) {
 			ret = -EINVAL;
 			break;
 		}
@@ -204,10 +204,10 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static int orion5x_wdt_release(struct inode *inode, struct file *file)
+static int orion_wdt_release(struct inode *inode, struct file *file)
 {
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
@@ -218,98 +218,98 @@ static int orion5x_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations orion5x_wdt_fops = {
+static const struct file_operations orion_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.write		= orion5x_wdt_write,
-	.unlocked_ioctl	= orion5x_wdt_ioctl,
-	.open		= orion5x_wdt_open,
-	.release	= orion5x_wdt_release,
+	.write		= orion_wdt_write,
+	.unlocked_ioctl	= orion_wdt_ioctl,
+	.open		= orion_wdt_open,
+	.release	= orion_wdt_release,
 };
 
-static struct miscdevice orion5x_wdt_miscdev = {
+static struct miscdevice orion_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
-	.fops		= &orion5x_wdt_fops,
+	.fops		= &orion_wdt_fops,
 };
 
-static int __devinit orion5x_wdt_probe(struct platform_device *pdev)
+static int __devinit orion_wdt_probe(struct platform_device *pdev)
 {
-	struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data;
+	struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 
 	if (pdata) {
 		wdt_tclk = pdata->tclk;
 	} else {
-		printk(KERN_ERR "Orion5x Watchdog misses platform data\n");
+		printk(KERN_ERR "Orion Watchdog misses platform data\n");
 		return -ENODEV;
 	}
 
-	if (orion5x_wdt_miscdev.parent)
+	if (orion_wdt_miscdev.parent)
 		return -EBUSY;
-	orion5x_wdt_miscdev.parent = &pdev->dev;
+	orion_wdt_miscdev.parent = &pdev->dev;
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
-	if (orion5x_wdt_settimeout(heartbeat))
+	if (orion_wdt_settimeout(heartbeat))
 		heartbeat = wdt_max_duration;
 
-	ret = misc_register(&orion5x_wdt_miscdev);
+	ret = misc_register(&orion_wdt_miscdev);
 	if (ret)
 		return ret;
 
-	printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n",
+	printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n",
 				heartbeat, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
-static int __devexit orion5x_wdt_remove(struct platform_device *pdev)
+static int __devexit orion_wdt_remove(struct platform_device *pdev)
 {
 	int ret;
 
 	if (test_bit(WDT_IN_USE, &wdt_status)) {
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 		clear_bit(WDT_IN_USE, &wdt_status);
 	}
 
-	ret = misc_deregister(&orion5x_wdt_miscdev);
+	ret = misc_deregister(&orion_wdt_miscdev);
 	if (!ret)
-		orion5x_wdt_miscdev.parent = NULL;
+		orion_wdt_miscdev.parent = NULL;
 
 	return ret;
 }
 
-static void orion5x_wdt_shutdown(struct platform_device *pdev)
+static void orion_wdt_shutdown(struct platform_device *pdev)
 {
 	if (test_bit(WDT_IN_USE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 }
 
-static struct platform_driver orion5x_wdt_driver = {
-	.probe		= orion5x_wdt_probe,
-	.remove		= __devexit_p(orion5x_wdt_remove),
-	.shutdown	= orion5x_wdt_shutdown,
+static struct platform_driver orion_wdt_driver = {
+	.probe		= orion_wdt_probe,
+	.remove		= __devexit_p(orion_wdt_remove),
+	.shutdown	= orion_wdt_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "orion5x_wdt",
+		.name	= "orion_wdt",
 	},
 };
 
-static int __init orion5x_wdt_init(void)
+static int __init orion_wdt_init(void)
 {
 	spin_lock_init(&wdt_lock);
-	return platform_driver_register(&orion5x_wdt_driver);
+	return platform_driver_register(&orion_wdt_driver);
 }
 
-static void __exit orion5x_wdt_exit(void)
+static void __exit orion_wdt_exit(void)
 {
-	platform_driver_unregister(&orion5x_wdt_driver);
+	platform_driver_unregister(&orion_wdt_driver);
 }
 
-module_init(orion5x_wdt_init);
-module_exit(orion5x_wdt_exit);
+module_init(orion_wdt_init);
+module_exit(orion_wdt_exit);
 
 MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
-MODULE_DESCRIPTION("Orion5x Processor Watchdog");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 8ac9cddac57..cab100acf98 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -18,6 +18,16 @@ config XEN_SCRUB_PAGES
 	  secure, but slightly less efficient.
 	  If in doubt, say yes.
 
+config XEN_DEV_EVTCHN
+	tristate "Xen /dev/xen/evtchn device"
+	depends on XEN
+	default y
+	help
+	  The evtchn driver allows a userspace process to triger event
+	  channels and to receive notification of an event channel
+	  firing.
+	  If in doubt, say yes.
+
 config XENFS
 	tristate "Xen filesystem"
 	depends on XEN
@@ -41,3 +51,13 @@ config XEN_COMPAT_XENFS
          a xen platform.
          If in doubt, say yes.
 
+config XEN_SYS_HYPERVISOR
+       bool "Create xen entries under /sys/hypervisor"
+       depends on XEN && SYSFS
+       select SYS_HYPERVISOR
+       default y
+       help
+         Create entries under /sys/hypervisor describing the Xen
+	 hypervisor environment.  When running native or in another
+	 virtual environment, /sys/hypervisor will still be present,
+	 but will have no xen contents.
\ No newline at end of file
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index ff8accc9e10..ec2a39b1e26 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -4,4 +4,6 @@ obj-y	+= xenbus/
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu_hotplug.o
 obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
 obj-$(CONFIG_XEN_BALLOON)	+= balloon.o
-obj-$(CONFIG_XENFS)		+= xenfs/
\ No newline at end of file
+obj-$(CONFIG_XEN_DEV_EVTCHN)	+= evtchn.o
+obj-$(CONFIG_XENFS)		+= xenfs/
+obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
\ No newline at end of file
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 30963af5dba..891d2e90753 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -151,6 +151,12 @@ static unsigned int evtchn_from_irq(unsigned irq)
 	return info_for_irq(irq)->evtchn;
 }
 
+unsigned irq_from_evtchn(unsigned int evtchn)
+{
+	return evtchn_to_irq[evtchn];
+}
+EXPORT_SYMBOL_GPL(irq_from_evtchn);
+
 static enum ipi_vector ipi_from_irq(unsigned irq)
 {
 	struct irq_info *info = info_for_irq(irq);
@@ -335,7 +341,7 @@ static int find_unbound_irq(void)
 	if (irq == nr_irqs)
 		panic("No available IRQ to bind to: increase nr_irqs!\n");
 
-	desc = irq_to_desc_alloc_cpu(irq, 0);
+	desc = irq_to_desc_alloc_node(irq, 0);
 	if (WARN_ON(desc == NULL))
 		return -1;
 
@@ -688,13 +694,13 @@ void rebind_evtchn_irq(int evtchn, int irq)
 }
 
 /* Rebind an evtchn so that it gets delivered to a specific cpu */
-static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
+static int rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
 {
 	struct evtchn_bind_vcpu bind_vcpu;
 	int evtchn = evtchn_from_irq(irq);
 
 	if (!VALID_EVTCHN(evtchn))
-		return;
+		return -1;
 
 	/* Send future instances of this interrupt to other vcpu. */
 	bind_vcpu.port = evtchn;
@@ -707,13 +713,15 @@ static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
 	 */
 	if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0)
 		bind_evtchn_to_cpu(evtchn, tcpu);
-}
 
+	return 0;
+}
 
-static void set_affinity_irq(unsigned irq, const struct cpumask *dest)
+static int set_affinity_irq(unsigned irq, const struct cpumask *dest)
 {
 	unsigned tcpu = cpumask_first(dest);
-	rebind_irq_to_cpu(irq, tcpu);
+
+	return rebind_irq_to_cpu(irq, tcpu);
 }
 
 int resend_irq_on_evtchn(unsigned int irq)
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
new file mode 100644
index 00000000000..af031950f9b
--- /dev/null
+++ b/drivers/xen/evtchn.c
@@ -0,0 +1,507 @@
+/******************************************************************************
+ * evtchn.c
+ *
+ * Driver for receiving and demuxing event-channel signals.
+ *
+ * Copyright (c) 2004-2005, K A Fraser
+ * Multi-process extensions Copyright (c) 2004, Steven Smith
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/major.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/poll.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <xen/events.h>
+#include <xen/evtchn.h>
+#include <asm/xen/hypervisor.h>
+
+struct per_user_data {
+	struct mutex bind_mutex; /* serialize bind/unbind operations */
+
+	/* Notification ring, accessed via /dev/xen/evtchn. */
+#define EVTCHN_RING_SIZE     (PAGE_SIZE / sizeof(evtchn_port_t))
+#define EVTCHN_RING_MASK(_i) ((_i)&(EVTCHN_RING_SIZE-1))
+	evtchn_port_t *ring;
+	unsigned int ring_cons, ring_prod, ring_overflow;
+	struct mutex ring_cons_mutex; /* protect against concurrent readers */
+
+	/* Processes wait on this queue when ring is empty. */
+	wait_queue_head_t evtchn_wait;
+	struct fasync_struct *evtchn_async_queue;
+	const char *name;
+};
+
+/* Who's bound to each port? */
+static struct per_user_data *port_user[NR_EVENT_CHANNELS];
+static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */
+
+irqreturn_t evtchn_interrupt(int irq, void *data)
+{
+	unsigned int port = (unsigned long)data;
+	struct per_user_data *u;
+
+	spin_lock(&port_user_lock);
+
+	u = port_user[port];
+
+	disable_irq_nosync(irq);
+
+	if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) {
+		u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port;
+		wmb(); /* Ensure ring contents visible */
+		if (u->ring_cons == u->ring_prod++) {
+			wake_up_interruptible(&u->evtchn_wait);
+			kill_fasync(&u->evtchn_async_queue,
+				    SIGIO, POLL_IN);
+		}
+	} else {
+		u->ring_overflow = 1;
+	}
+
+	spin_unlock(&port_user_lock);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t evtchn_read(struct file *file, char __user *buf,
+			   size_t count, loff_t *ppos)
+{
+	int rc;
+	unsigned int c, p, bytes1 = 0, bytes2 = 0;
+	struct per_user_data *u = file->private_data;
+
+	/* Whole number of ports. */
+	count &= ~(sizeof(evtchn_port_t)-1);
+
+	if (count == 0)
+		return 0;
+
+	if (count > PAGE_SIZE)
+		count = PAGE_SIZE;
+
+	for (;;) {
+		mutex_lock(&u->ring_cons_mutex);
+
+		rc = -EFBIG;
+		if (u->ring_overflow)
+			goto unlock_out;
+
+		c = u->ring_cons;
+		p = u->ring_prod;
+		if (c != p)
+			break;
+
+		mutex_unlock(&u->ring_cons_mutex);
+
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		rc = wait_event_interruptible(u->evtchn_wait,
+					      u->ring_cons != u->ring_prod);
+		if (rc)
+			return rc;
+	}
+
+	/* Byte lengths of two chunks. Chunk split (if any) is at ring wrap. */
+	if (((c ^ p) & EVTCHN_RING_SIZE) != 0) {
+		bytes1 = (EVTCHN_RING_SIZE - EVTCHN_RING_MASK(c)) *
+			sizeof(evtchn_port_t);
+		bytes2 = EVTCHN_RING_MASK(p) * sizeof(evtchn_port_t);
+	} else {
+		bytes1 = (p - c) * sizeof(evtchn_port_t);
+		bytes2 = 0;
+	}
+
+	/* Truncate chunks according to caller's maximum byte count. */
+	if (bytes1 > count) {
+		bytes1 = count;
+		bytes2 = 0;
+	} else if ((bytes1 + bytes2) > count) {
+		bytes2 = count - bytes1;
+	}
+
+	rc = -EFAULT;
+	rmb(); /* Ensure that we see the port before we copy it. */
+	if (copy_to_user(buf, &u->ring[EVTCHN_RING_MASK(c)], bytes1) ||
+	    ((bytes2 != 0) &&
+	     copy_to_user(&buf[bytes1], &u->ring[0], bytes2)))
+		goto unlock_out;
+
+	u->ring_cons += (bytes1 + bytes2) / sizeof(evtchn_port_t);
+	rc = bytes1 + bytes2;
+
+ unlock_out:
+	mutex_unlock(&u->ring_cons_mutex);
+	return rc;
+}
+
+static ssize_t evtchn_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	int rc, i;
+	evtchn_port_t *kbuf = (evtchn_port_t *)__get_free_page(GFP_KERNEL);
+	struct per_user_data *u = file->private_data;
+
+	if (kbuf == NULL)
+		return -ENOMEM;
+
+	/* Whole number of ports. */
+	count &= ~(sizeof(evtchn_port_t)-1);
+
+	rc = 0;
+	if (count == 0)
+		goto out;
+
+	if (count > PAGE_SIZE)
+		count = PAGE_SIZE;
+
+	rc = -EFAULT;
+	if (copy_from_user(kbuf, buf, count) != 0)
+		goto out;
+
+	spin_lock_irq(&port_user_lock);
+	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++)
+		if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u))
+			enable_irq(irq_from_evtchn(kbuf[i]));
+	spin_unlock_irq(&port_user_lock);
+
+	rc = count;
+
+ out:
+	free_page((unsigned long)kbuf);
+	return rc;
+}
+
+static int evtchn_bind_to_user(struct per_user_data *u, int port)
+{
+	int rc = 0;
+
+	/*
+	 * Ports are never reused, so every caller should pass in a
+	 * unique port.
+	 *
+	 * (Locking not necessary because we haven't registered the
+	 * interrupt handler yet, and our caller has already
+	 * serialized bind operations.)
+	 */
+	BUG_ON(port_user[port] != NULL);
+	port_user[port] = u;
+
+	rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED,
+				       u->name, (void *)(unsigned long)port);
+	if (rc >= 0)
+		rc = 0;
+
+	return rc;
+}
+
+static void evtchn_unbind_from_user(struct per_user_data *u, int port)
+{
+	int irq = irq_from_evtchn(port);
+
+	unbind_from_irqhandler(irq, (void *)(unsigned long)port);
+
+	/* make sure we unbind the irq handler before clearing the port */
+	barrier();
+
+	port_user[port] = NULL;
+}
+
+static long evtchn_ioctl(struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	int rc;
+	struct per_user_data *u = file->private_data;
+	void __user *uarg = (void __user *) arg;
+
+	/* Prevent bind from racing with unbind */
+	mutex_lock(&u->bind_mutex);
+
+	switch (cmd) {
+	case IOCTL_EVTCHN_BIND_VIRQ: {
+		struct ioctl_evtchn_bind_virq bind;
+		struct evtchn_bind_virq bind_virq;
+
+		rc = -EFAULT;
+		if (copy_from_user(&bind, uarg, sizeof(bind)))
+			break;
+
+		bind_virq.virq = bind.virq;
+		bind_virq.vcpu = 0;
+		rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq,
+						 &bind_virq);
+		if (rc != 0)
+			break;
+
+		rc = evtchn_bind_to_user(u, bind_virq.port);
+		if (rc == 0)
+			rc = bind_virq.port;
+		break;
+	}
+
+	case IOCTL_EVTCHN_BIND_INTERDOMAIN: {
+		struct ioctl_evtchn_bind_interdomain bind;
+		struct evtchn_bind_interdomain bind_interdomain;
+
+		rc = -EFAULT;
+		if (copy_from_user(&bind, uarg, sizeof(bind)))
+			break;
+
+		bind_interdomain.remote_dom  = bind.remote_domain;
+		bind_interdomain.remote_port = bind.remote_port;
+		rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_interdomain,
+						 &bind_interdomain);
+		if (rc != 0)
+			break;
+
+		rc = evtchn_bind_to_user(u, bind_interdomain.local_port);
+		if (rc == 0)
+			rc = bind_interdomain.local_port;
+		break;
+	}
+
+	case IOCTL_EVTCHN_BIND_UNBOUND_PORT: {
+		struct ioctl_evtchn_bind_unbound_port bind;
+		struct evtchn_alloc_unbound alloc_unbound;
+
+		rc = -EFAULT;
+		if (copy_from_user(&bind, uarg, sizeof(bind)))
+			break;
+
+		alloc_unbound.dom        = DOMID_SELF;
+		alloc_unbound.remote_dom = bind.remote_domain;
+		rc = HYPERVISOR_event_channel_op(EVTCHNOP_alloc_unbound,
+						 &alloc_unbound);
+		if (rc != 0)
+			break;
+
+		rc = evtchn_bind_to_user(u, alloc_unbound.port);
+		if (rc == 0)
+			rc = alloc_unbound.port;
+		break;
+	}
+
+	case IOCTL_EVTCHN_UNBIND: {
+		struct ioctl_evtchn_unbind unbind;
+
+		rc = -EFAULT;
+		if (copy_from_user(&unbind, uarg, sizeof(unbind)))
+			break;
+
+		rc = -EINVAL;
+		if (unbind.port >= NR_EVENT_CHANNELS)
+			break;
+
+		spin_lock_irq(&port_user_lock);
+
+		rc = -ENOTCONN;
+		if (port_user[unbind.port] != u) {
+			spin_unlock_irq(&port_user_lock);
+			break;
+		}
+
+		evtchn_unbind_from_user(u, unbind.port);
+
+		spin_unlock_irq(&port_user_lock);
+
+		rc = 0;
+		break;
+	}
+
+	case IOCTL_EVTCHN_NOTIFY: {
+		struct ioctl_evtchn_notify notify;
+
+		rc = -EFAULT;
+		if (copy_from_user(&notify, uarg, sizeof(notify)))
+			break;
+
+		if (notify.port >= NR_EVENT_CHANNELS) {
+			rc = -EINVAL;
+		} else if (port_user[notify.port] != u) {
+			rc = -ENOTCONN;
+		} else {
+			notify_remote_via_evtchn(notify.port);
+			rc = 0;
+		}
+		break;
+	}
+
+	case IOCTL_EVTCHN_RESET: {
+		/* Initialise the ring to empty. Clear errors. */
+		mutex_lock(&u->ring_cons_mutex);
+		spin_lock_irq(&port_user_lock);
+		u->ring_cons = u->ring_prod = u->ring_overflow = 0;
+		spin_unlock_irq(&port_user_lock);
+		mutex_unlock(&u->ring_cons_mutex);
+		rc = 0;
+		break;
+	}
+
+	default:
+		rc = -ENOSYS;
+		break;
+	}
+	mutex_unlock(&u->bind_mutex);
+
+	return rc;
+}
+
+static unsigned int evtchn_poll(struct file *file, poll_table *wait)
+{
+	unsigned int mask = POLLOUT | POLLWRNORM;
+	struct per_user_data *u = file->private_data;
+
+	poll_wait(file, &u->evtchn_wait, wait);
+	if (u->ring_cons != u->ring_prod)
+		mask |= POLLIN | POLLRDNORM;
+	if (u->ring_overflow)
+		mask = POLLERR;
+	return mask;
+}
+
+static int evtchn_fasync(int fd, struct file *filp, int on)
+{
+	struct per_user_data *u = filp->private_data;
+	return fasync_helper(fd, filp, on, &u->evtchn_async_queue);
+}
+
+static int evtchn_open(struct inode *inode, struct file *filp)
+{
+	struct per_user_data *u;
+
+	u = kzalloc(sizeof(*u), GFP_KERNEL);
+	if (u == NULL)
+		return -ENOMEM;
+
+	u->name = kasprintf(GFP_KERNEL, "evtchn:%s", current->comm);
+	if (u->name == NULL) {
+		kfree(u);
+		return -ENOMEM;
+	}
+
+	init_waitqueue_head(&u->evtchn_wait);
+
+	u->ring = (evtchn_port_t *)__get_free_page(GFP_KERNEL);
+	if (u->ring == NULL) {
+		kfree(u->name);
+		kfree(u);
+		return -ENOMEM;
+	}
+
+	mutex_init(&u->bind_mutex);
+	mutex_init(&u->ring_cons_mutex);
+
+	filp->private_data = u;
+
+	return 0;
+}
+
+static int evtchn_release(struct inode *inode, struct file *filp)
+{
+	int i;
+	struct per_user_data *u = filp->private_data;
+
+	spin_lock_irq(&port_user_lock);
+
+	free_page((unsigned long)u->ring);
+
+	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
+		if (port_user[i] != u)
+			continue;
+
+		evtchn_unbind_from_user(port_user[i], i);
+	}
+
+	spin_unlock_irq(&port_user_lock);
+
+	kfree(u->name);
+	kfree(u);
+
+	return 0;
+}
+
+static const struct file_operations evtchn_fops = {
+	.owner   = THIS_MODULE,
+	.read    = evtchn_read,
+	.write   = evtchn_write,
+	.unlocked_ioctl = evtchn_ioctl,
+	.poll    = evtchn_poll,
+	.fasync  = evtchn_fasync,
+	.open    = evtchn_open,
+	.release = evtchn_release,
+};
+
+static struct miscdevice evtchn_miscdev = {
+	.minor        = MISC_DYNAMIC_MINOR,
+	.name         = "evtchn",
+	.fops         = &evtchn_fops,
+};
+static int __init evtchn_init(void)
+{
+	int err;
+
+	if (!xen_domain())
+		return -ENODEV;
+
+	spin_lock_init(&port_user_lock);
+	memset(port_user, 0, sizeof(port_user));
+
+	/* Create '/dev/misc/evtchn'. */
+	err = misc_register(&evtchn_miscdev);
+	if (err != 0) {
+		printk(KERN_ALERT "Could not register /dev/misc/evtchn\n");
+		return err;
+	}
+
+	printk(KERN_INFO "Event-channel device installed.\n");
+
+	return 0;
+}
+
+static void __exit evtchn_cleanup(void)
+{
+	misc_deregister(&evtchn_miscdev);
+}
+
+module_init(evtchn_init);
+module_exit(evtchn_cleanup);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 4b5b84837ee..10d03d7931c 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -43,7 +43,7 @@ static int xen_suspend(void *data)
 	if (err) {
 		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
 			err);
-		device_power_up(PMSG_RESUME);
+		dpm_resume_noirq(PMSG_RESUME);
 		return err;
 	}
 
@@ -69,7 +69,7 @@ static int xen_suspend(void *data)
 	}
 
 	sysdev_resume();
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 	return 0;
 }
@@ -92,19 +92,18 @@ static void do_suspend(void)
 	}
 #endif
 
-	err = device_suspend(PMSG_SUSPEND);
+	err = dpm_suspend_start(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
+		printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
 		goto out;
 	}
 
-	printk("suspending xenbus...\n");
-	/* XXX use normal device tree? */
-	xenbus_suspend();
+	printk(KERN_DEBUG "suspending xenstore...\n");
+	xs_suspend();
 
-	err = device_power_down(PMSG_SUSPEND);
+	err = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "device_power_down failed: %d\n", err);
+		printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
 		goto resume_devices;
 	}
 
@@ -116,14 +115,14 @@ static void do_suspend(void)
 
 	if (!cancelled) {
 		xen_arch_resume();
-		xenbus_resume();
+		xs_resume();
 	} else
-		xenbus_suspend_cancel();
+		xs_suspend_cancel();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 resume_devices:
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 
 	/* Make sure timer events get retriggered on all CPUs */
 	clock_was_set();
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
new file mode 100644
index 00000000000..88a60e03ccf
--- /dev/null
+++ b/drivers/xen/sys-hypervisor.c
@@ -0,0 +1,445 @@
+/*
+ *  copyright (c) 2006 IBM Corporation
+ *  Authored by: Mike D. Day <ncmike@us.ibm.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kobject.h>
+
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/xenbus.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/version.h>
+
+#define HYPERVISOR_ATTR_RO(_name) \
+static struct hyp_sysfs_attr  _name##_attr = __ATTR_RO(_name)
+
+#define HYPERVISOR_ATTR_RW(_name) \
+static struct hyp_sysfs_attr _name##_attr = \
+	__ATTR(_name, 0644, _name##_show, _name##_store)
+
+struct hyp_sysfs_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct hyp_sysfs_attr *, char *);
+	ssize_t (*store)(struct hyp_sysfs_attr *, const char *, size_t);
+	void *hyp_attr_data;
+};
+
+static ssize_t type_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	return sprintf(buffer, "xen\n");
+}
+
+HYPERVISOR_ATTR_RO(type);
+
+static int __init xen_sysfs_type_init(void)
+{
+	return sysfs_create_file(hypervisor_kobj, &type_attr.attr);
+}
+
+static void xen_sysfs_type_destroy(void)
+{
+	sysfs_remove_file(hypervisor_kobj, &type_attr.attr);
+}
+
+/* xen version attributes */
+static ssize_t major_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int version = HYPERVISOR_xen_version(XENVER_version, NULL);
+	if (version)
+		return sprintf(buffer, "%d\n", version >> 16);
+	return -ENODEV;
+}
+
+HYPERVISOR_ATTR_RO(major);
+
+static ssize_t minor_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int version = HYPERVISOR_xen_version(XENVER_version, NULL);
+	if (version)
+		return sprintf(buffer, "%d\n", version & 0xff);
+	return -ENODEV;
+}
+
+HYPERVISOR_ATTR_RO(minor);
+
+static ssize_t extra_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	char *extra;
+
+	extra = kmalloc(XEN_EXTRAVERSION_LEN, GFP_KERNEL);
+	if (extra) {
+		ret = HYPERVISOR_xen_version(XENVER_extraversion, extra);
+		if (!ret)
+			ret = sprintf(buffer, "%s\n", extra);
+		kfree(extra);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(extra);
+
+static struct attribute *version_attrs[] = {
+	&major_attr.attr,
+	&minor_attr.attr,
+	&extra_attr.attr,
+	NULL
+};
+
+static struct attribute_group version_group = {
+	.name = "version",
+	.attrs = version_attrs,
+};
+
+static int __init xen_sysfs_version_init(void)
+{
+	return sysfs_create_group(hypervisor_kobj, &version_group);
+}
+
+static void xen_sysfs_version_destroy(void)
+{
+	sysfs_remove_group(hypervisor_kobj, &version_group);
+}
+
+/* UUID */
+
+static ssize_t uuid_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	char *vm, *val;
+	int ret;
+	extern int xenstored_ready;
+
+	if (!xenstored_ready)
+		return -EBUSY;
+
+	vm = xenbus_read(XBT_NIL, "vm", "", NULL);
+	if (IS_ERR(vm))
+		return PTR_ERR(vm);
+	val = xenbus_read(XBT_NIL, vm, "uuid", NULL);
+	kfree(vm);
+	if (IS_ERR(val))
+		return PTR_ERR(val);
+	ret = sprintf(buffer, "%s\n", val);
+	kfree(val);
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(uuid);
+
+static int __init xen_sysfs_uuid_init(void)
+{
+	return sysfs_create_file(hypervisor_kobj, &uuid_attr.attr);
+}
+
+static void xen_sysfs_uuid_destroy(void)
+{
+	sysfs_remove_file(hypervisor_kobj, &uuid_attr.attr);
+}
+
+/* xen compilation attributes */
+
+static ssize_t compiler_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	struct xen_compile_info *info;
+
+	info = kmalloc(sizeof(struct xen_compile_info), GFP_KERNEL);
+	if (info) {
+		ret = HYPERVISOR_xen_version(XENVER_compile_info, info);
+		if (!ret)
+			ret = sprintf(buffer, "%s\n", info->compiler);
+		kfree(info);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(compiler);
+
+static ssize_t compiled_by_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	struct xen_compile_info *info;
+
+	info = kmalloc(sizeof(struct xen_compile_info), GFP_KERNEL);
+	if (info) {
+		ret = HYPERVISOR_xen_version(XENVER_compile_info, info);
+		if (!ret)
+			ret = sprintf(buffer, "%s\n", info->compile_by);
+		kfree(info);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(compiled_by);
+
+static ssize_t compile_date_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	struct xen_compile_info *info;
+
+	info = kmalloc(sizeof(struct xen_compile_info), GFP_KERNEL);
+	if (info) {
+		ret = HYPERVISOR_xen_version(XENVER_compile_info, info);
+		if (!ret)
+			ret = sprintf(buffer, "%s\n", info->compile_date);
+		kfree(info);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(compile_date);
+
+static struct attribute *xen_compile_attrs[] = {
+	&compiler_attr.attr,
+	&compiled_by_attr.attr,
+	&compile_date_attr.attr,
+	NULL
+};
+
+static struct attribute_group xen_compilation_group = {
+	.name = "compilation",
+	.attrs = xen_compile_attrs,
+};
+
+int __init static xen_compilation_init(void)
+{
+	return sysfs_create_group(hypervisor_kobj, &xen_compilation_group);
+}
+
+static void xen_compilation_destroy(void)
+{
+	sysfs_remove_group(hypervisor_kobj, &xen_compilation_group);
+}
+
+/* xen properties info */
+
+static ssize_t capabilities_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	char *caps;
+
+	caps = kmalloc(XEN_CAPABILITIES_INFO_LEN, GFP_KERNEL);
+	if (caps) {
+		ret = HYPERVISOR_xen_version(XENVER_capabilities, caps);
+		if (!ret)
+			ret = sprintf(buffer, "%s\n", caps);
+		kfree(caps);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(capabilities);
+
+static ssize_t changeset_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	char *cset;
+
+	cset = kmalloc(XEN_CHANGESET_INFO_LEN, GFP_KERNEL);
+	if (cset) {
+		ret = HYPERVISOR_xen_version(XENVER_changeset, cset);
+		if (!ret)
+			ret = sprintf(buffer, "%s\n", cset);
+		kfree(cset);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(changeset);
+
+static ssize_t virtual_start_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret = -ENOMEM;
+	struct xen_platform_parameters *parms;
+
+	parms = kmalloc(sizeof(struct xen_platform_parameters), GFP_KERNEL);
+	if (parms) {
+		ret = HYPERVISOR_xen_version(XENVER_platform_parameters,
+					     parms);
+		if (!ret)
+			ret = sprintf(buffer, "%lx\n", parms->virt_start);
+		kfree(parms);
+	}
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(virtual_start);
+
+static ssize_t pagesize_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	int ret;
+
+	ret = HYPERVISOR_xen_version(XENVER_pagesize, NULL);
+	if (ret > 0)
+		ret = sprintf(buffer, "%x\n", ret);
+
+	return ret;
+}
+
+HYPERVISOR_ATTR_RO(pagesize);
+
+static ssize_t xen_feature_show(int index, char *buffer)
+{
+	ssize_t ret;
+	struct xen_feature_info info;
+
+	info.submap_idx = index;
+	ret = HYPERVISOR_xen_version(XENVER_get_features, &info);
+	if (!ret)
+		ret = sprintf(buffer, "%08x", info.submap);
+
+	return ret;
+}
+
+static ssize_t features_show(struct hyp_sysfs_attr *attr, char *buffer)
+{
+	ssize_t len;
+	int i;
+
+	len = 0;
+	for (i = XENFEAT_NR_SUBMAPS-1; i >= 0; i--) {
+		int ret = xen_feature_show(i, buffer + len);
+		if (ret < 0) {
+			if (len == 0)
+				len = ret;
+			break;
+		}
+		len += ret;
+	}
+	if (len > 0)
+		buffer[len++] = '\n';
+
+	return len;
+}
+
+HYPERVISOR_ATTR_RO(features);
+
+static struct attribute *xen_properties_attrs[] = {
+	&capabilities_attr.attr,
+	&changeset_attr.attr,
+	&virtual_start_attr.attr,
+	&pagesize_attr.attr,
+	&features_attr.attr,
+	NULL
+};
+
+static struct attribute_group xen_properties_group = {
+	.name = "properties",
+	.attrs = xen_properties_attrs,
+};
+
+static int __init xen_properties_init(void)
+{
+	return sysfs_create_group(hypervisor_kobj, &xen_properties_group);
+}
+
+static void xen_properties_destroy(void)
+{
+	sysfs_remove_group(hypervisor_kobj, &xen_properties_group);
+}
+
+static int __init hyper_sysfs_init(void)
+{
+	int ret;
+
+	if (!xen_domain())
+		return -ENODEV;
+
+	ret = xen_sysfs_type_init();
+	if (ret)
+		goto out;
+	ret = xen_sysfs_version_init();
+	if (ret)
+		goto version_out;
+	ret = xen_compilation_init();
+	if (ret)
+		goto comp_out;
+	ret = xen_sysfs_uuid_init();
+	if (ret)
+		goto uuid_out;
+	ret = xen_properties_init();
+	if (ret)
+		goto prop_out;
+
+	goto out;
+
+prop_out:
+	xen_sysfs_uuid_destroy();
+uuid_out:
+	xen_compilation_destroy();
+comp_out:
+	xen_sysfs_version_destroy();
+version_out:
+	xen_sysfs_type_destroy();
+out:
+	return ret;
+}
+
+static void __exit hyper_sysfs_exit(void)
+{
+	xen_properties_destroy();
+	xen_compilation_destroy();
+	xen_sysfs_uuid_destroy();
+	xen_sysfs_version_destroy();
+	xen_sysfs_type_destroy();
+
+}
+module_init(hyper_sysfs_init);
+module_exit(hyper_sysfs_exit);
+
+static ssize_t hyp_sysfs_show(struct kobject *kobj,
+			      struct attribute *attr,
+			      char *buffer)
+{
+	struct hyp_sysfs_attr *hyp_attr;
+	hyp_attr = container_of(attr, struct hyp_sysfs_attr, attr);
+	if (hyp_attr->show)
+		return hyp_attr->show(hyp_attr, buffer);
+	return 0;
+}
+
+static ssize_t hyp_sysfs_store(struct kobject *kobj,
+			       struct attribute *attr,
+			       const char *buffer,
+			       size_t len)
+{
+	struct hyp_sysfs_attr *hyp_attr;
+	hyp_attr = container_of(attr, struct hyp_sysfs_attr, attr);
+	if (hyp_attr->store)
+		return hyp_attr->store(hyp_attr, buffer, len);
+	return 0;
+}
+
+static struct sysfs_ops hyp_sysfs_ops = {
+	.show = hyp_sysfs_show,
+	.store = hyp_sysfs_store,
+};
+
+static struct kobj_type hyp_sysfs_kobj_type = {
+	.sysfs_ops = &hyp_sysfs_ops,
+};
+
+static int __init hypervisor_subsys_init(void)
+{
+	if (!xen_domain())
+		return -ENODEV;
+
+	hypervisor_kobj->ktype = &hyp_sysfs_kobj_type;
+	return 0;
+}
+device_initcall(hypervisor_subsys_init);
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 773d1cf2328..d42e25d5968 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -71,6 +71,9 @@ static int xenbus_probe_frontend(const char *type, const char *name);
 
 static void xenbus_dev_shutdown(struct device *_dev);
 
+static int xenbus_dev_suspend(struct device *dev, pm_message_t state);
+static int xenbus_dev_resume(struct device *dev);
+
 /* If something in array of ids matches this device, return it. */
 static const struct xenbus_device_id *
 match_device(const struct xenbus_device_id *arr, struct xenbus_device *dev)
@@ -188,6 +191,9 @@ static struct xen_bus_type xenbus_frontend = {
 		.remove    = xenbus_dev_remove,
 		.shutdown  = xenbus_dev_shutdown,
 		.dev_attrs = xenbus_dev_attrs,
+
+		.suspend   = xenbus_dev_suspend,
+		.resume    = xenbus_dev_resume,
 	},
 };
 
@@ -654,6 +660,7 @@ void xenbus_dev_changed(const char *node, struct xen_bus_type *bus)
 
 	kfree(root);
 }
+EXPORT_SYMBOL_GPL(xenbus_dev_changed);
 
 static void frontend_changed(struct xenbus_watch *watch,
 			     const char **vec, unsigned int len)
@@ -669,7 +676,7 @@ static struct xenbus_watch fe_watch = {
 	.callback = frontend_changed,
 };
 
-static int suspend_dev(struct device *dev, void *data)
+static int xenbus_dev_suspend(struct device *dev, pm_message_t state)
 {
 	int err = 0;
 	struct xenbus_driver *drv;
@@ -682,35 +689,14 @@ static int suspend_dev(struct device *dev, void *data)
 	drv = to_xenbus_driver(dev->driver);
 	xdev = container_of(dev, struct xenbus_device, dev);
 	if (drv->suspend)
-		err = drv->suspend(xdev);
+		err = drv->suspend(xdev, state);
 	if (err)
 		printk(KERN_WARNING
 		       "xenbus: suspend %s failed: %i\n", dev_name(dev), err);
 	return 0;
 }
 
-static int suspend_cancel_dev(struct device *dev, void *data)
-{
-	int err = 0;
-	struct xenbus_driver *drv;
-	struct xenbus_device *xdev;
-
-	DPRINTK("");
-
-	if (dev->driver == NULL)
-		return 0;
-	drv = to_xenbus_driver(dev->driver);
-	xdev = container_of(dev, struct xenbus_device, dev);
-	if (drv->suspend_cancel)
-		err = drv->suspend_cancel(xdev);
-	if (err)
-		printk(KERN_WARNING
-		       "xenbus: suspend_cancel %s failed: %i\n",
-		       dev_name(dev), err);
-	return 0;
-}
-
-static int resume_dev(struct device *dev, void *data)
+static int xenbus_dev_resume(struct device *dev)
 {
 	int err;
 	struct xenbus_driver *drv;
@@ -755,33 +741,6 @@ static int resume_dev(struct device *dev, void *data)
 	return 0;
 }
 
-void xenbus_suspend(void)
-{
-	DPRINTK("");
-
-	bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, suspend_dev);
-	xenbus_backend_suspend(suspend_dev);
-	xs_suspend();
-}
-EXPORT_SYMBOL_GPL(xenbus_suspend);
-
-void xenbus_resume(void)
-{
-	xb_init_comms();
-	xs_resume();
-	bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, resume_dev);
-	xenbus_backend_resume(resume_dev);
-}
-EXPORT_SYMBOL_GPL(xenbus_resume);
-
-void xenbus_suspend_cancel(void)
-{
-	xs_suspend_cancel();
-	bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, suspend_cancel_dev);
-	xenbus_backend_resume(suspend_cancel_dev);
-}
-EXPORT_SYMBOL_GPL(xenbus_suspend_cancel);
-
 /* A flag to determine if xenstored is 'ready' (i.e. has started) */
 int xenstored_ready = 0;
 
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index e325eab4724..eab33f1dbdf 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -673,6 +673,8 @@ void xs_resume(void)
 	struct xenbus_watch *watch;
 	char token[sizeof(watch) * 2 + 1];
 
+	xb_init_comms();
+
 	mutex_unlock(&xs_state.response_mutex);
 	mutex_unlock(&xs_state.request_mutex);
 	up_write(&xs_state.transaction_mutex);
diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index 515741a8e6b..6559e0c752c 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -20,10 +20,27 @@
 MODULE_DESCRIPTION("Xen filesystem");
 MODULE_LICENSE("GPL");
 
+static ssize_t capabilities_read(struct file *file, char __user *buf,
+				 size_t size, loff_t *off)
+{
+	char *tmp = "";
+
+	if (xen_initial_domain())
+		tmp = "control_d\n";
+
+	return simple_read_from_buffer(buf, size, off, tmp, strlen(tmp));
+}
+
+static const struct file_operations capabilities_file_ops = {
+	.read = capabilities_read,
+};
+
 static int xenfs_fill_super(struct super_block *sb, void *data, int silent)
 {
 	static struct tree_descr xenfs_files[] = {
-		[2] = {"xenbus", &xenbus_file_ops, S_IRUSR|S_IWUSR},
+		[1] = {},
+		{ "xenbus", &xenbus_file_ops, S_IRUSR|S_IWUSR },
+		{ "capabilities", &capabilities_file_ops, S_IRUGO },
 		{""},
 	};
 
diff --git a/firmware/cis/.gitignore b/firmware/cis/.gitignore
new file mode 100644
index 00000000000..1de39847f26
--- /dev/null
+++ b/firmware/cis/.gitignore
@@ -0,0 +1 @@
+*.cis
diff --git a/fs/Kconfig b/fs/Kconfig
index 9f7270f36b2..525da2e8f73 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -62,6 +62,16 @@ source "fs/autofs/Kconfig"
 source "fs/autofs4/Kconfig"
 source "fs/fuse/Kconfig"
 
+config CUSE
+	tristate "Character device in Userpace support"
+	depends on FUSE_FS
+	help
+	  This FUSE extension allows character devices to be
+	  implemented in userspace.
+
+	  If you want to develop or use userspace character device
+	  based on CUSE, answer Y or M.
+
 config GENERIC_ACL
 	bool
 	select FS_POSIX_ACL
diff --git a/fs/adfs/adfs.h b/fs/adfs/adfs.h
index e0a85dbeeb8..a6665f37f45 100644
--- a/fs/adfs/adfs.h
+++ b/fs/adfs/adfs.h
@@ -53,6 +53,7 @@ struct adfs_dir_ops {
 	int	(*update)(struct adfs_dir *dir, struct object_info *obj);
 	int	(*create)(struct adfs_dir *dir, struct object_info *obj);
 	int	(*remove)(struct adfs_dir *dir, struct object_info *obj);
+	int	(*sync)(struct adfs_dir *dir);
 	void	(*free)(struct adfs_dir *dir);
 };
 
@@ -90,7 +91,8 @@ extern const struct dentry_operations adfs_dentry_operations;
 extern struct adfs_dir_ops adfs_f_dir_ops;
 extern struct adfs_dir_ops adfs_fplus_dir_ops;
 
-extern int adfs_dir_update(struct super_block *sb, struct object_info *obj);
+extern int adfs_dir_update(struct super_block *sb, struct object_info *obj,
+			   int wait);
 
 /* file.c */
 extern const struct inode_operations adfs_file_inode_operations;
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index e867ccf3724..4d4073447d1 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -83,7 +83,7 @@ out:
 }
 
 int
-adfs_dir_update(struct super_block *sb, struct object_info *obj)
+adfs_dir_update(struct super_block *sb, struct object_info *obj, int wait)
 {
 	int ret = -EINVAL;
 #ifdef CONFIG_ADFS_FS_RW
@@ -106,6 +106,12 @@ adfs_dir_update(struct super_block *sb, struct object_info *obj)
 	ret = ops->update(&dir, obj);
 	write_unlock(&adfs_dir_lock);
 
+	if (wait) {
+		int err = ops->sync(&dir);
+		if (!ret)
+			ret = err;
+	}
+
 	ops->free(&dir);
 out:
 #endif
@@ -199,7 +205,7 @@ const struct file_operations adfs_dir_operations = {
 	.read		= generic_read_dir,
 	.llseek		= generic_file_llseek,
 	.readdir	= adfs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 };
 
 static int
diff --git a/fs/adfs/dir_f.c b/fs/adfs/dir_f.c
index ea7df214692..31df6adf0de 100644
--- a/fs/adfs/dir_f.c
+++ b/fs/adfs/dir_f.c
@@ -437,6 +437,22 @@ bad_dir:
 #endif
 }
 
+static int
+adfs_f_sync(struct adfs_dir *dir)
+{
+	int err = 0;
+	int i;
+
+	for (i = dir->nr_buffers - 1; i >= 0; i--) {
+		struct buffer_head *bh = dir->bh[i];
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			err = -EIO;
+	}
+
+	return err;
+}
+
 static void
 adfs_f_free(struct adfs_dir *dir)
 {
@@ -456,5 +472,6 @@ struct adfs_dir_ops adfs_f_dir_ops = {
 	.setpos		= adfs_f_setpos,
 	.getnext	= adfs_f_getnext,
 	.update		= adfs_f_update,
+	.sync		= adfs_f_sync,
 	.free		= adfs_f_free
 };
diff --git a/fs/adfs/dir_fplus.c b/fs/adfs/dir_fplus.c
index 1ec644e32df..139e0f345f1 100644
--- a/fs/adfs/dir_fplus.c
+++ b/fs/adfs/dir_fplus.c
@@ -161,6 +161,22 @@ out:
 	return ret;
 }
 
+static int
+adfs_fplus_sync(struct adfs_dir *dir)
+{
+	int err = 0;
+	int i;
+
+	for (i = dir->nr_buffers - 1; i >= 0; i--) {
+		struct buffer_head *bh = dir->bh[i];
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			err = -EIO;
+	}
+
+	return err;
+}
+
 static void
 adfs_fplus_free(struct adfs_dir *dir)
 {
@@ -175,5 +191,6 @@ struct adfs_dir_ops adfs_fplus_dir_ops = {
 	.read		= adfs_fplus_read,
 	.setpos		= adfs_fplus_setpos,
 	.getnext	= adfs_fplus_getnext,
+	.sync		= adfs_fplus_sync,
 	.free		= adfs_fplus_free
 };
diff --git a/fs/adfs/file.c b/fs/adfs/file.c
index 36e381c6a99..8224d54a2af 100644
--- a/fs/adfs/file.c
+++ b/fs/adfs/file.c
@@ -30,7 +30,7 @@ const struct file_operations adfs_file_operations = {
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
 	.mmap		= generic_file_mmap,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
 	.splice_read	= generic_file_splice_read,
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index e647200262a..05b3a677201 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -376,7 +376,7 @@ out:
  * The adfs-specific inode data has already been updated by
  * adfs_notify_change()
  */
-int adfs_write_inode(struct inode *inode, int unused)
+int adfs_write_inode(struct inode *inode, int wait)
 {
 	struct super_block *sb = inode->i_sb;
 	struct object_info obj;
@@ -391,7 +391,7 @@ int adfs_write_inode(struct inode *inode, int unused)
 	obj.attr	= ADFS_I(inode)->attr;
 	obj.size	= inode->i_size;
 
-	ret = adfs_dir_update(sb, &obj);
+	ret = adfs_dir_update(sb, &obj, wait);
 	unlock_kernel();
 	return ret;
 }
diff --git a/fs/adfs/map.c b/fs/adfs/map.c
index 92ab4fbc203..568081b93f7 100644
--- a/fs/adfs/map.c
+++ b/fs/adfs/map.c
@@ -62,7 +62,7 @@ static DEFINE_RWLOCK(adfs_map_lock);
 #define GET_FRAG_ID(_map,_start,_idmask)				\
 	({								\
 		unsigned char *_m = _map + (_start >> 3);		\
-		u32 _frag = get_unaligned((u32 *)_m);			\
+		u32 _frag = get_unaligned_le32(_m);			\
 		_frag >>= (_start & 7);					\
 		_frag & _idmask;					\
 	})
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index dd9becca424..0ec5aaf47aa 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -132,11 +132,15 @@ static void adfs_put_super(struct super_block *sb)
 	int i;
 	struct adfs_sb_info *asb = ADFS_SB(sb);
 
+	lock_kernel();
+
 	for (i = 0; i < asb->s_map_size; i++)
 		brelse(asb->s_map[i].dm_bh);
 	kfree(asb->s_map);
 	kfree(asb);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int adfs_show_options(struct seq_file *seq, struct vfsmount *mnt)
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 1a2d5e3c7f4..e511dc621a2 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -182,6 +182,7 @@ extern int			 affs_add_entry(struct inode *dir, struct inode *inode, struct dent
 
 void		affs_free_prealloc(struct inode *inode);
 extern void	affs_truncate(struct inode *);
+int		affs_file_fsync(struct file *, struct dentry *, int);
 
 /* dir.c */
 
diff --git a/fs/affs/dir.c b/fs/affs/dir.c
index 7b36904dbea..8ca8f3a5559 100644
--- a/fs/affs/dir.c
+++ b/fs/affs/dir.c
@@ -21,7 +21,7 @@ const struct file_operations affs_dir_operations = {
 	.read		= generic_read_dir,
 	.llseek		= generic_file_llseek,
 	.readdir	= affs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= affs_file_fsync,
 };
 
 /*
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 9246cb4aa01..184e55c1c9b 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -34,7 +34,7 @@ const struct file_operations affs_file_operations = {
 	.mmap		= generic_file_mmap,
 	.open		= affs_file_open,
 	.release	= affs_file_release,
-	.fsync		= file_fsync,
+	.fsync		= affs_file_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -915,3 +915,15 @@ affs_truncate(struct inode *inode)
 	}
 	affs_free_prealloc(inode);
 }
+
+int affs_file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+{
+	struct inode * inode = dentry->d_inode;
+	int ret, err;
+
+	ret = write_inode_now(inode, 0);
+	err = sync_blockdev(inode->i_sb->s_bdev);
+	if (!ret)
+		ret = err;
+	return ret;
+}
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 63f5183f263..104fdcb3a7f 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -16,6 +16,7 @@
 #include <linux/parser.h>
 #include <linux/magic.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include "affs.h"
 
 extern struct timezone sys_tz;
@@ -24,49 +25,67 @@ static int affs_statfs(struct dentry *dentry, struct kstatfs *buf);
 static int affs_remount (struct super_block *sb, int *flags, char *data);
 
 static void
+affs_commit_super(struct super_block *sb, int clean)
+{
+	struct affs_sb_info *sbi = AFFS_SB(sb);
+	struct buffer_head *bh = sbi->s_root_bh;
+	struct affs_root_tail *tail = AFFS_ROOT_TAIL(sb, bh);
+
+	tail->bm_flag = cpu_to_be32(clean);
+	secs_to_datestamp(get_seconds(), &tail->disk_change);
+	affs_fix_checksum(sb, bh);
+	mark_buffer_dirty(bh);
+}
+
+static void
 affs_put_super(struct super_block *sb)
 {
 	struct affs_sb_info *sbi = AFFS_SB(sb);
 	pr_debug("AFFS: put_super()\n");
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->bm_flag = cpu_to_be32(1);
-		secs_to_datestamp(get_seconds(),
-				  &AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->disk_change);
-		affs_fix_checksum(sb, sbi->s_root_bh);
-		mark_buffer_dirty(sbi->s_root_bh);
-	}
+	lock_kernel();
+
+	if (!(sb->s_flags & MS_RDONLY))
+		affs_commit_super(sb, 1);
 
 	kfree(sbi->s_prefix);
 	affs_free_bitmap(sb);
 	affs_brelse(sbi->s_root_bh);
 	kfree(sbi);
 	sb->s_fs_info = NULL;
-	return;
+
+	unlock_kernel();
 }
 
 static void
 affs_write_super(struct super_block *sb)
 {
 	int clean = 2;
-	struct affs_sb_info *sbi = AFFS_SB(sb);
 
+	lock_super(sb);
 	if (!(sb->s_flags & MS_RDONLY)) {
 		//	if (sbi->s_bitmap[i].bm_bh) {
 		//		if (buffer_dirty(sbi->s_bitmap[i].bm_bh)) {
 		//			clean = 0;
-		AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->bm_flag = cpu_to_be32(clean);
-		secs_to_datestamp(get_seconds(),
-				  &AFFS_ROOT_TAIL(sb, sbi->s_root_bh)->disk_change);
-		affs_fix_checksum(sb, sbi->s_root_bh);
-		mark_buffer_dirty(sbi->s_root_bh);
+		affs_commit_super(sb, clean);
 		sb->s_dirt = !clean;	/* redo until bitmap synced */
 	} else
 		sb->s_dirt = 0;
+	unlock_super(sb);
 
 	pr_debug("AFFS: write_super() at %lu, clean=%d\n", get_seconds(), clean);
 }
 
+static int
+affs_sync_fs(struct super_block *sb, int wait)
+{
+	lock_super(sb);
+	affs_commit_super(sb, 2);
+	sb->s_dirt = 0;
+	unlock_super(sb);
+	return 0;
+}
+
 static struct kmem_cache * affs_inode_cachep;
 
 static struct inode *affs_alloc_inode(struct super_block *sb)
@@ -124,6 +143,7 @@ static const struct super_operations affs_sops = {
 	.clear_inode	= affs_clear_inode,
 	.put_super	= affs_put_super,
 	.write_super	= affs_write_super,
+	.sync_fs	= affs_sync_fs,
 	.statfs		= affs_statfs,
 	.remount_fs	= affs_remount,
 	.show_options	= generic_show_options,
@@ -507,6 +527,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 		kfree(new_opts);
 		return -EINVAL;
 	}
+	lock_kernel();
 	replace_mount_options(sb, new_opts);
 
 	sbi->s_flags = mount_flags;
@@ -514,8 +535,10 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 	sbi->s_uid   = uid;
 	sbi->s_gid   = gid;
 
-	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
+		unlock_kernel();
 		return 0;
+	}
 	if (*flags & MS_RDONLY) {
 		sb->s_dirt = 1;
 		while (sb->s_dirt)
@@ -524,6 +547,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 	} else
 		res = affs_init_bitmap(sb, flags);
 
+	unlock_kernel();
 	return res;
 }
 
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index 2b9e2d03a39..c52be53f694 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -244,7 +244,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd)
 	case -EBUSY:
 		/* someone else made a mount here whilst we were busy */
 		while (d_mountpoint(nd->path.dentry) &&
-		       follow_down(&nd->path.mnt, &nd->path.dentry))
+		       follow_down(&nd->path))
 			;
 		err = 0;
 	default:
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 76828e5f8a3..ad0514d0115 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -440,8 +440,12 @@ static void afs_put_super(struct super_block *sb)
 
 	_enter("");
 
+	lock_kernel();
+
 	afs_put_volume(as->volume);
 
+	unlock_kernel();
+
 	_leave("");
 }
 
diff --git a/fs/autofs/dirhash.c b/fs/autofs/dirhash.c
index 4eb4d8dfb2f..2316e944a10 100644
--- a/fs/autofs/dirhash.c
+++ b/fs/autofs/dirhash.c
@@ -85,13 +85,12 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb,
 		}
 		path.mnt = mnt;
 		path_get(&path);
-		if (!follow_down(&path.mnt, &path.dentry)) {
+		if (!follow_down(&path)) {
 			path_put(&path);
 			DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
 			continue;
 		}
-		while (d_mountpoint(path.dentry) &&
-		       follow_down(&path.mnt, &path.dentry))
+		while (d_mountpoint(path.dentry) && follow_down(&path));
 			;
 		umount_ok = may_umount(path.mnt);
 		path_put(&path);
diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index b7ff33c6310..8f7cdde4173 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -223,12 +223,12 @@ int autofs4_wait(struct autofs_sb_info *,struct dentry *, enum autofs_notify);
 int autofs4_wait_release(struct autofs_sb_info *,autofs_wqt_t,int);
 void autofs4_catatonic_mode(struct autofs_sb_info *);
 
-static inline int autofs4_follow_mount(struct vfsmount **mnt, struct dentry **dentry)
+static inline int autofs4_follow_mount(struct path *path)
 {
 	int res = 0;
 
-	while (d_mountpoint(*dentry)) {
-		int followed = follow_down(mnt, dentry);
+	while (d_mountpoint(path->dentry)) {
+		int followed = follow_down(path);
 		if (!followed)
 			break;
 		res = 1;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 84168c0dcc2..f3da2eb51f5 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -192,77 +192,42 @@ static int autofs_dev_ioctl_protosubver(struct file *fp,
 	return 0;
 }
 
-/*
- * Walk down the mount stack looking for an autofs mount that
- * has the requested device number (aka. new_encode_dev(sb->s_dev).
- */
-static int autofs_dev_ioctl_find_super(struct nameidata *nd, dev_t devno)
+static int find_autofs_mount(const char *pathname,
+			     struct path *res,
+			     int test(struct path *path, void *data),
+			     void *data)
 {
-	struct dentry *dentry;
-	struct inode *inode;
-	struct super_block *sb;
-	dev_t s_dev;
-	unsigned int err;
-
+	struct path path;
+	int err = kern_path(pathname, 0, &path);
+	if (err)
+		return err;
 	err = -ENOENT;
-
-	/* Lookup the dentry name at the base of our mount point */
-	dentry = d_lookup(nd->path.dentry, &nd->last);
-	if (!dentry)
-		goto out;
-
-	dput(nd->path.dentry);
-	nd->path.dentry = dentry;
-
-	/* And follow the mount stack looking for our autofs mount */
-	while (follow_down(&nd->path.mnt, &nd->path.dentry)) {
-		inode = nd->path.dentry->d_inode;
-		if (!inode)
-			break;
-
-		sb = inode->i_sb;
-		s_dev = new_encode_dev(sb->s_dev);
-		if (devno == s_dev) {
-			if (sb->s_magic == AUTOFS_SUPER_MAGIC) {
+	while (path.dentry == path.mnt->mnt_root) {
+		if (path.mnt->mnt_sb->s_magic == AUTOFS_SUPER_MAGIC) {
+			if (test(&path, data)) {
+				path_get(&path);
+				if (!err) /* already found some */
+					path_put(res);
+				*res = path;
 				err = 0;
-				break;
 			}
 		}
+		if (!follow_up(&path))
+			break;
 	}
-out:
+	path_put(&path);
 	return err;
 }
 
-/*
- * Walk down the mount stack looking for an autofs mount that
- * has the requested mount type (ie. indirect, direct or offset).
- */
-static int autofs_dev_ioctl_find_sbi_type(struct nameidata *nd, unsigned int type)
+static int test_by_dev(struct path *path, void *p)
 {
-	struct dentry *dentry;
-	struct autofs_info *ino;
-	unsigned int err;
-
-	err = -ENOENT;
-
-	/* Lookup the dentry name at the base of our mount point */
-	dentry = d_lookup(nd->path.dentry, &nd->last);
-	if (!dentry)
-		goto out;
-
-	dput(nd->path.dentry);
-	nd->path.dentry = dentry;
+	return path->mnt->mnt_sb->s_dev == *(dev_t *)p;
+}
 
-	/* And follow the mount stack looking for our autofs mount */
-	while (follow_down(&nd->path.mnt, &nd->path.dentry)) {
-		ino = autofs4_dentry_ino(nd->path.dentry);
-		if (ino && ino->sbi->type & type) {
-			err = 0;
-			break;
-		}
-	}
-out:
-	return err;
+static int test_by_type(struct path *path, void *p)
+{
+	struct autofs_info *ino = autofs4_dentry_ino(path->dentry);
+	return ino && ino->sbi->type & *(unsigned *)p;
 }
 
 static void autofs_dev_ioctl_fd_install(unsigned int fd, struct file *file)
@@ -283,31 +248,25 @@ static void autofs_dev_ioctl_fd_install(unsigned int fd, struct file *file)
  * Open a file descriptor on the autofs mount point corresponding
  * to the given path and device number (aka. new_encode_dev(sb->s_dev)).
  */
-static int autofs_dev_ioctl_open_mountpoint(const char *path, dev_t devid)
+static int autofs_dev_ioctl_open_mountpoint(const char *name, dev_t devid)
 {
-	struct file *filp;
-	struct nameidata nd;
 	int err, fd;
 
 	fd = get_unused_fd();
 	if (likely(fd >= 0)) {
-		/* Get nameidata of the parent directory */
-		err = path_lookup(path, LOOKUP_PARENT, &nd);
+		struct file *filp;
+		struct path path;
+
+		err = find_autofs_mount(name, &path, test_by_dev, &devid);
 		if (err)
 			goto out;
 
 		/*
-		 * Search down, within the parent, looking for an
-		 * autofs super block that has the device number
+		 * Find autofs super block that has the device number
 		 * corresponding to the autofs fs we want to open.
 		 */
-		err = autofs_dev_ioctl_find_super(&nd, devid);
-		if (err) {
-			path_put(&nd.path);
-			goto out;
-		}
 
-		filp = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
+		filp = dentry_open(path.dentry, path.mnt, O_RDONLY,
 				   current_cred());
 		if (IS_ERR(filp)) {
 			err = PTR_ERR(filp);
@@ -340,7 +299,7 @@ static int autofs_dev_ioctl_openmount(struct file *fp,
 	param->ioctlfd = -1;
 
 	path = param->path;
-	devid = param->openmount.devid;
+	devid = new_decode_dev(param->openmount.devid);
 
 	err = 0;
 	fd = autofs_dev_ioctl_open_mountpoint(path, devid);
@@ -475,8 +434,7 @@ static int autofs_dev_ioctl_requester(struct file *fp,
 				      struct autofs_dev_ioctl *param)
 {
 	struct autofs_info *ino;
-	struct nameidata nd;
-	const char *path;
+	struct path path;
 	dev_t devid;
 	int err = -ENOENT;
 
@@ -485,32 +443,24 @@ static int autofs_dev_ioctl_requester(struct file *fp,
 		goto out;
 	}
 
-	path = param->path;
-	devid = new_encode_dev(sbi->sb->s_dev);
+	devid = sbi->sb->s_dev;
 
 	param->requester.uid = param->requester.gid = -1;
 
-	/* Get nameidata of the parent directory */
-	err = path_lookup(path, LOOKUP_PARENT, &nd);
+	err = find_autofs_mount(param->path, &path, test_by_dev, &devid);
 	if (err)
 		goto out;
 
-	err = autofs_dev_ioctl_find_super(&nd, devid);
-	if (err)
-		goto out_release;
-
-	ino = autofs4_dentry_ino(nd.path.dentry);
+	ino = autofs4_dentry_ino(path.dentry);
 	if (ino) {
 		err = 0;
-		autofs4_expire_wait(nd.path.dentry);
+		autofs4_expire_wait(path.dentry);
 		spin_lock(&sbi->fs_lock);
 		param->requester.uid = ino->uid;
 		param->requester.gid = ino->gid;
 		spin_unlock(&sbi->fs_lock);
 	}
-
-out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return err;
 }
@@ -569,8 +519,8 @@ static int autofs_dev_ioctl_ismountpoint(struct file *fp,
 					 struct autofs_sb_info *sbi,
 					 struct autofs_dev_ioctl *param)
 {
-	struct nameidata nd;
-	const char *path;
+	struct path path;
+	const char *name;
 	unsigned int type;
 	unsigned int devid, magic;
 	int err = -ENOENT;
@@ -580,71 +530,46 @@ static int autofs_dev_ioctl_ismountpoint(struct file *fp,
 		goto out;
 	}
 
-	path = param->path;
+	name = param->path;
 	type = param->ismountpoint.in.type;
 
 	param->ismountpoint.out.devid = devid = 0;
 	param->ismountpoint.out.magic = magic = 0;
 
 	if (!fp || param->ioctlfd == -1) {
-		if (autofs_type_any(type)) {
-			struct super_block *sb;
-
-			err = path_lookup(path, LOOKUP_FOLLOW, &nd);
-			if (err)
-				goto out;
-
-			sb = nd.path.dentry->d_sb;
-			devid = new_encode_dev(sb->s_dev);
-		} else {
-			struct autofs_info *ino;
-
-			err = path_lookup(path, LOOKUP_PARENT, &nd);
-			if (err)
-				goto out;
-
-			err = autofs_dev_ioctl_find_sbi_type(&nd, type);
-			if (err)
-				goto out_release;
-
-			ino = autofs4_dentry_ino(nd.path.dentry);
-			devid = autofs4_get_dev(ino->sbi);
-		}
-
+		if (autofs_type_any(type))
+			err = kern_path(name, LOOKUP_FOLLOW, &path);
+		else
+			err = find_autofs_mount(name, &path, test_by_type, &type);
+		if (err)
+			goto out;
+		devid = new_encode_dev(path.mnt->mnt_sb->s_dev);
 		err = 0;
-		if (nd.path.dentry->d_inode &&
-		    nd.path.mnt->mnt_root == nd.path.dentry) {
+		if (path.dentry->d_inode &&
+		    path.mnt->mnt_root == path.dentry) {
 			err = 1;
-			magic = nd.path.dentry->d_inode->i_sb->s_magic;
+			magic = path.dentry->d_inode->i_sb->s_magic;
 		}
 	} else {
-		dev_t dev = autofs4_get_dev(sbi);
+		dev_t dev = sbi->sb->s_dev;
 
-		err = path_lookup(path, LOOKUP_PARENT, &nd);
+		err = find_autofs_mount(name, &path, test_by_dev, &dev);
 		if (err)
 			goto out;
 
-		err = autofs_dev_ioctl_find_super(&nd, dev);
-		if (err)
-			goto out_release;
-
-		devid = dev;
+		devid = new_encode_dev(dev);
 
-		err = have_submounts(nd.path.dentry);
+		err = have_submounts(path.dentry);
 
-		if (nd.path.mnt->mnt_mountpoint != nd.path.mnt->mnt_root) {
-			if (follow_down(&nd.path.mnt, &nd.path.dentry)) {
-				struct inode *inode = nd.path.dentry->d_inode;
-				magic = inode->i_sb->s_magic;
-			}
+		if (path.mnt->mnt_mountpoint != path.mnt->mnt_root) {
+			if (follow_down(&path))
+				magic = path.mnt->mnt_sb->s_magic;
 		}
 	}
 
 	param->ismountpoint.out.devid = devid;
 	param->ismountpoint.out.magic = magic;
-
-out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return err;
 }
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 3077d8f1652..aa39ae83f01 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -48,19 +48,19 @@ static inline int autofs4_can_expire(struct dentry *dentry,
 static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 {
 	struct dentry *top = dentry;
+	struct path path = {.mnt = mnt, .dentry = dentry};
 	int status = 1;
 
 	DPRINTK("dentry %p %.*s",
 		dentry, (int)dentry->d_name.len, dentry->d_name.name);
 
-	mntget(mnt);
-	dget(dentry);
+	path_get(&path);
 
-	if (!follow_down(&mnt, &dentry))
+	if (!follow_down(&path))
 		goto done;
 
-	if (is_autofs4_dentry(dentry)) {
-		struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	if (is_autofs4_dentry(path.dentry)) {
+		struct autofs_sb_info *sbi = autofs4_sbi(path.dentry->d_sb);
 
 		/* This is an autofs submount, we can't expire it */
 		if (autofs_type_indirect(sbi->type))
@@ -70,7 +70,7 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 		 * Otherwise it's an offset mount and we need to check
 		 * if we can umount its mount, if there is one.
 		 */
-		if (!d_mountpoint(dentry)) {
+		if (!d_mountpoint(path.dentry)) {
 			status = 0;
 			goto done;
 		}
@@ -86,8 +86,7 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 	status = 0;
 done:
 	DPRINTK("returning = %d", status);
-	dput(dentry);
-	mntput(mnt);
+	path_put(&path);
 	return status;
 }
 
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index e383bf0334f..b96a3c57359 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -181,7 +181,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 		nd->flags);
 	/*
 	 * For an expire of a covered direct or offset mount we need
-	 * to beeak out of follow_down() at the autofs mount trigger
+	 * to break out of follow_down() at the autofs mount trigger
 	 * (d_mounted--), so we can see the expiring flag, and manage
 	 * the blocking and following here until the expire is completed.
 	 */
@@ -190,7 +190,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 		if (ino->flags & AUTOFS_INF_EXPIRING) {
 			spin_unlock(&sbi->fs_lock);
 			/* Follow down to our covering mount. */
-			if (!follow_down(&nd->path.mnt, &nd->path.dentry))
+			if (!follow_down(&nd->path))
 				goto done;
 			goto follow;
 		}
@@ -230,8 +230,7 @@ follow:
 	 * to follow it.
 	 */
 	if (d_mountpoint(dentry)) {
-		if (!autofs4_follow_mount(&nd->path.mnt,
-					  &nd->path.dentry)) {
+		if (!autofs4_follow_mount(&nd->path)) {
 			status = -ENOENT;
 			goto out_error;
 		}
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index eeb24684590..2341375386f 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -297,20 +297,14 @@ static int validate_request(struct autofs_wait_queue **wait,
 	 */
 	if (notify == NFY_MOUNT) {
 		/*
-		 * If the dentry isn't hashed just go ahead and try the
-		 * mount again with a new wait (not much else we can do).
-		*/
-		if (!d_unhashed(dentry)) {
-			/*
-			 * But if the dentry is hashed, that means that we
-			 * got here through the revalidate path.  Thus, we
-			 * need to check if the dentry has been mounted
-			 * while we waited on the wq_mutex. If it has,
-			 * simply return success.
-			 */
-			if (d_mountpoint(dentry))
-				return 0;
-		}
+		 * If the dentry was successfully mounted while we slept
+		 * on the wait queue mutex we can return success. If it
+		 * isn't mounted (doesn't have submounts for the case of
+		 * a multi-mount with no mount at it's base) we can
+		 * continue on and create a new request.
+		 */
+		if (have_submounts(dentry))
+			return 0;
 	}
 
 	return 1;
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 76afd0d6b86..9367b6297d8 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -737,6 +737,8 @@ parse_options(char *options, befs_mount_options * opts)
 static void
 befs_put_super(struct super_block *sb)
 {
+	lock_kernel();
+
 	kfree(BEFS_SB(sb)->mount_opts.iocharset);
 	BEFS_SB(sb)->mount_opts.iocharset = NULL;
 
@@ -747,7 +749,8 @@ befs_put_super(struct super_block *sb)
 
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
-	return;
+
+	unlock_kernel();
 }
 
 /* Allocate private field of the superblock, fill it.
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 4dd1b623f93..54bd07d44e6 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -79,7 +79,7 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 const struct file_operations bfs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= bfs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 	.llseek		= generic_file_llseek,
 };
 
@@ -205,7 +205,7 @@ static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 		inode->i_nlink = 1;
 	}
 	de->ino = 0;
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
 	mark_inode_dirty(dir);
 	inode->i_ctime = dir->i_ctime;
@@ -267,7 +267,7 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		new_inode->i_ctime = CURRENT_TIME_SEC;
 		inode_dec_link_count(new_inode);
 	}
-	mark_buffer_dirty(old_bh);
+	mark_buffer_dirty_inode(old_bh, old_dir);
 	error = 0;
 
 end_rename:
@@ -320,7 +320,7 @@ static int bfs_add_entry(struct inode *dir, const unsigned char *name,
 				for (i = 0; i < BFS_NAMELEN; i++)
 					de->name[i] =
 						(i < namelen) ? name[i] : 0;
-				mark_buffer_dirty(bh);
+				mark_buffer_dirty_inode(bh, dir);
 				brelse(bh);
 				return 0;
 			}
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index cc4062d12ca..6f60336c662 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -30,6 +30,7 @@ MODULE_LICENSE("GPL");
 #define dprintf(x...)
 #endif
 
+static void bfs_write_super(struct super_block *s);
 void dump_imap(const char *prefix, struct super_block *s);
 
 struct inode *bfs_iget(struct super_block *sb, unsigned long ino)
@@ -97,14 +98,15 @@ error:
 	return ERR_PTR(-EIO);
 }
 
-static int bfs_write_inode(struct inode *inode, int unused)
+static int bfs_write_inode(struct inode *inode, int wait)
 {
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 	unsigned int ino = (u16)inode->i_ino;
         unsigned long i_sblock;
 	struct bfs_inode *di;
 	struct buffer_head *bh;
 	int block, off;
-	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
+	int err = 0;
 
         dprintf("ino=%08x\n", ino);
 
@@ -145,9 +147,14 @@ static int bfs_write_inode(struct inode *inode, int unused)
 	di->i_eoffset = cpu_to_le32(i_sblock * BFS_BSIZE + inode->i_size - 1);
 
 	mark_buffer_dirty(bh);
+	if (wait) {
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			err = -EIO;
+	}
 	brelse(bh);
 	mutex_unlock(&info->bfs_lock);
-	return 0;
+	return err;
 }
 
 static void bfs_delete_inode(struct inode *inode)
@@ -209,6 +216,26 @@ static void bfs_delete_inode(struct inode *inode)
 	clear_inode(inode);
 }
 
+static int bfs_sync_fs(struct super_block *sb, int wait)
+{
+	struct bfs_sb_info *info = BFS_SB(sb);
+
+	mutex_lock(&info->bfs_lock);
+	mark_buffer_dirty(info->si_sbh);
+	sb->s_dirt = 0;
+	mutex_unlock(&info->bfs_lock);
+
+	return 0;
+}
+
+static void bfs_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		bfs_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
+}
+
 static void bfs_put_super(struct super_block *s)
 {
 	struct bfs_sb_info *info = BFS_SB(s);
@@ -216,11 +243,18 @@ static void bfs_put_super(struct super_block *s)
 	if (!info)
 		return;
 
+	lock_kernel();
+
+	if (s->s_dirt)
+		bfs_write_super(s);
+
 	brelse(info->si_sbh);
 	mutex_destroy(&info->bfs_lock);
 	kfree(info->si_imap);
 	kfree(info);
 	s->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -240,17 +274,6 @@ static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	return 0;
 }
 
-static void bfs_write_super(struct super_block *s)
-{
-	struct bfs_sb_info *info = BFS_SB(s);
-
-	mutex_lock(&info->bfs_lock);
-	if (!(s->s_flags & MS_RDONLY))
-		mark_buffer_dirty(info->si_sbh);
-	s->s_dirt = 0;
-	mutex_unlock(&info->bfs_lock);
-}
-
 static struct kmem_cache *bfs_inode_cachep;
 
 static struct inode *bfs_alloc_inode(struct super_block *sb)
@@ -298,6 +321,7 @@ static const struct super_operations bfs_sops = {
 	.delete_inode	= bfs_delete_inode,
 	.put_super	= bfs_put_super,
 	.write_super	= bfs_write_super,
+	.sync_fs	= bfs_sync_fs,
 	.statfs		= bfs_statfs,
 };
 
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 5cebf0b3779..697f6b5f131 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -41,6 +41,7 @@
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
+#include <asm/page.h>
 
 /****************************************************************************/
 
@@ -54,6 +55,18 @@
 #define	DBG_FLT(a...)
 #endif
 
+/*
+ * User data (stack, data section and bss) needs to be aligned
+ * for the same reasons as SLAB memory is, and to the same amount.
+ * Avoid duplicating architecture specific code by using the same
+ * macro as with SLAB allocation:
+ */
+#ifdef ARCH_SLAB_MINALIGN
+#define FLAT_DATA_ALIGN	(ARCH_SLAB_MINALIGN)
+#else
+#define FLAT_DATA_ALIGN	(sizeof(void *))
+#endif
+
 #define RELOC_FAILED 0xff00ff01		/* Relocation incorrect somewhere */
 #define UNLOADED_LIB 0x7ff000ff		/* Placeholder for unused library */
 
@@ -114,20 +127,18 @@ static unsigned long create_flat_tables(
 	int envc = bprm->envc;
 	char uninitialized_var(dummy);
 
-	sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p);
+	sp = (unsigned long *)p;
+	sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+	sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+	argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+	envp = argv + (argc + 1);
 
-	sp -= envc+1;
-	envp = sp;
-	sp -= argc+1;
-	argv = sp;
-
-	flat_stack_align(sp);
 	if (flat_argvp_envp_on_stack()) {
-		--sp; put_user((unsigned long) envp, sp);
-		--sp; put_user((unsigned long) argv, sp);
+		put_user((unsigned long) envp, sp + 2);
+		put_user((unsigned long) argv, sp + 1);
 	}
 
-	put_user(argc,--sp);
+	put_user(argc, sp);
 	current->mm->arg_start = (unsigned long) p;
 	while (argc-->0) {
 		put_user((unsigned long) p, argv++);
@@ -558,7 +569,9 @@ static int load_flat_file(struct linux_binprm * bprm,
 			ret = realdatastart;
 			goto err;
 		}
-		datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+		datapos = ALIGN(realdatastart +
+				MAX_SHARED_LIBS * sizeof(unsigned long),
+				FLAT_DATA_ALIGN);
 
 		DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
 				(int)(data_len + bss_len + stack_len), (int)datapos);
@@ -604,9 +617,12 @@ static int load_flat_file(struct linux_binprm * bprm,
 		}
 
 		realdatastart = textpos + ntohl(hdr->data_start);
-		datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
-		reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
-				MAX_SHARED_LIBS * sizeof(unsigned long));
+		datapos = ALIGN(realdatastart +
+				MAX_SHARED_LIBS * sizeof(unsigned long),
+				FLAT_DATA_ALIGN);
+
+		reloc = (unsigned long *)
+			(datapos + (ntohl(hdr->reloc_start) - text_len));
 		memp = textpos;
 		memp_size = len;
 #ifdef CONFIG_BINFMT_ZFLAT
@@ -854,7 +870,7 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	stack_len = TOP_OF_ARGS - bprm->p;             /* the strings */
 	stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
 	stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-
+	stack_len += FLAT_DATA_ALIGN - 1;  /* reserve for upcoming alignment */
 	
 	res = load_flat_file(bprm, &libinfo, 0, &stack_len);
 	if (res > (unsigned long)-4096)
diff --git a/fs/bio.c b/fs/bio.c
index 98711647ece..5f80848c320 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -26,10 +26,9 @@
 #include <linux/mempool.h>
 #include <linux/workqueue.h>
 #include <linux/blktrace_api.h>
-#include <trace/block.h>
 #include <scsi/sg.h>		/* for struct sg_iovec */
 
-DEFINE_TRACE(block_split);
+#include <trace/events/block.h>
 
 /*
  * Test patch to inline a certain number of bi_io_vec's inside the bio
@@ -359,9 +358,9 @@ static void bio_kmalloc_destructor(struct bio *bio)
  *
  *   If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
  *   a bio. This is due to the mempool guarantees. To make this work, callers
- *   must never allocate more than 1 bio at the time from this pool. Callers
+ *   must never allocate more than 1 bio at a time from this pool. Callers
  *   that need to allocate more than 1 bio must always submit the previously
- *   allocate bio for IO before attempting to allocate a new one. Failure to
+ *   allocated bio for IO before attempting to allocate a new one. Failure to
  *   do so can cause livelocks under memory pressure.
  *
  **/
@@ -499,11 +498,11 @@ int bio_get_nr_vecs(struct block_device *bdev)
 	struct request_queue *q = bdev_get_queue(bdev);
 	int nr_pages;
 
-	nr_pages = ((q->max_sectors << 9) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	if (nr_pages > q->max_phys_segments)
-		nr_pages = q->max_phys_segments;
-	if (nr_pages > q->max_hw_segments)
-		nr_pages = q->max_hw_segments;
+	nr_pages = ((queue_max_sectors(q) << 9) + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	if (nr_pages > queue_max_phys_segments(q))
+		nr_pages = queue_max_phys_segments(q);
+	if (nr_pages > queue_max_hw_segments(q))
+		nr_pages = queue_max_hw_segments(q);
 
 	return nr_pages;
 }
@@ -562,8 +561,8 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
 	 * make this too complex.
 	 */
 
-	while (bio->bi_phys_segments >= q->max_phys_segments
-	       || bio->bi_phys_segments >= q->max_hw_segments) {
+	while (bio->bi_phys_segments >= queue_max_phys_segments(q)
+	       || bio->bi_phys_segments >= queue_max_hw_segments(q)) {
 
 		if (retried_segments)
 			return 0;
@@ -634,7 +633,8 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
 int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page *page,
 		    unsigned int len, unsigned int offset)
 {
-	return __bio_add_page(q, bio, page, len, offset, q->max_hw_sectors);
+	return __bio_add_page(q, bio, page, len, offset,
+			      queue_max_hw_sectors(q));
 }
 
 /**
@@ -654,7 +654,7 @@ int bio_add_page(struct bio *bio, struct page *page, unsigned int len,
 		 unsigned int offset)
 {
 	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
-	return __bio_add_page(q, bio, page, len, offset, q->max_sectors);
+	return __bio_add_page(q, bio, page, len, offset, queue_max_sectors(q));
 }
 
 struct bio_map_data {
@@ -721,7 +721,7 @@ static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
 
 		while (bv_len && iov_idx < iov_count) {
 			unsigned int bytes;
-			char *iov_addr;
+			char __user *iov_addr;
 
 			bytes = min_t(unsigned int,
 				      iov[iov_idx].iov_len - iov_off, bv_len);
@@ -1201,7 +1201,7 @@ static void bio_copy_kern_endio(struct bio *bio, int err)
 		char *addr = page_address(bvec->bv_page);
 		int len = bmd->iovecs[i].bv_len;
 
-		if (read && !err)
+		if (read)
 			memcpy(p, addr, len);
 
 		__free_page(bvec->bv_page);
@@ -1490,11 +1490,12 @@ struct bio_pair *bio_split(struct bio *bi, int first_sectors)
 sector_t bio_sector_offset(struct bio *bio, unsigned short index,
 			   unsigned int offset)
 {
-	unsigned int sector_sz = queue_hardsect_size(bio->bi_bdev->bd_disk->queue);
+	unsigned int sector_sz;
 	struct bio_vec *bv;
 	sector_t sectors;
 	int i;
 
+	sector_sz = queue_logical_block_size(bio->bi_bdev->bd_disk->queue);
 	sectors = 0;
 
 	if (index >= bio->bi_idx)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index f45dbc18dd1..3a6d4fb2a32 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -25,6 +25,7 @@
 #include <linux/uio.h>
 #include <linux/namei.h>
 #include <linux/log2.h>
+#include <linux/kmemleak.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
@@ -76,7 +77,7 @@ int set_blocksize(struct block_device *bdev, int size)
 		return -EINVAL;
 
 	/* Size cannot be smaller than the size supported by the device */
-	if (size < bdev_hardsect_size(bdev))
+	if (size < bdev_logical_block_size(bdev))
 		return -EINVAL;
 
 	/* Don't change the size if it is same as current */
@@ -106,7 +107,7 @@ EXPORT_SYMBOL(sb_set_blocksize);
 
 int sb_min_blocksize(struct super_block *sb, int size)
 {
-	int minsize = bdev_hardsect_size(sb->s_bdev);
+	int minsize = bdev_logical_block_size(sb->s_bdev);
 	if (size < minsize)
 		size = minsize;
 	return sb_set_blocksize(sb, size);
@@ -175,17 +176,22 @@ blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
 				iov, offset, nr_segs, blkdev_get_blocks, NULL);
 }
 
+int __sync_blockdev(struct block_device *bdev, int wait)
+{
+	if (!bdev)
+		return 0;
+	if (!wait)
+		return filemap_flush(bdev->bd_inode->i_mapping);
+	return filemap_write_and_wait(bdev->bd_inode->i_mapping);
+}
+
 /*
  * Write out and wait upon all the dirty data associated with a block
  * device via its mapping.  Does not take the superblock lock.
  */
 int sync_blockdev(struct block_device *bdev)
 {
-	int ret = 0;
-
-	if (bdev)
-		ret = filemap_write_and_wait(bdev->bd_inode->i_mapping);
-	return ret;
+	return __sync_blockdev(bdev, 1);
 }
 EXPORT_SYMBOL(sync_blockdev);
 
@@ -198,7 +204,7 @@ int fsync_bdev(struct block_device *bdev)
 {
 	struct super_block *sb = get_super(bdev);
 	if (sb) {
-		int res = fsync_super(sb);
+		int res = sync_filesystem(sb);
 		drop_super(sb);
 		return res;
 	}
@@ -240,7 +246,7 @@ struct super_block *freeze_bdev(struct block_device *bdev)
 		sb->s_frozen = SB_FREEZE_WRITE;
 		smp_wmb();
 
-		__fsync_super(sb);
+		sync_filesystem(sb);
 
 		sb->s_frozen = SB_FREEZE_TRANS;
 		smp_wmb();
@@ -492,6 +498,11 @@ void __init bdev_cache_init(void)
 	bd_mnt = kern_mount(&bd_type);
 	if (IS_ERR(bd_mnt))
 		panic("Cannot create bdev pseudo-fs");
+	/*
+	 * This vfsmount structure is only used to obtain the
+	 * blockdev_superblock, so tell kmemleak not to report it.
+	 */
+	kmemleak_not_leak(bd_mnt);
 	blockdev_superblock = bd_mnt->mnt_sb;	/* For writeback */
 }
 
@@ -1111,7 +1122,7 @@ EXPORT_SYMBOL(check_disk_change);
 
 void bd_set_size(struct block_device *bdev, loff_t size)
 {
-	unsigned bsize = bdev_hardsect_size(bdev);
+	unsigned bsize = bdev_logical_block_size(bdev);
 
 	bdev->bd_inode->i_size = size;
 	while (bsize < PAGE_CACHE_SIZE) {
diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile
index 94212844a9b..a35eb36b32f 100644
--- a/fs/btrfs/Makefile
+++ b/fs/btrfs/Makefile
@@ -6,5 +6,5 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
 	   transaction.o inode.o file.o tree-defrag.o \
 	   extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
 	   extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
-	   ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \
-	   compression.o delayed-ref.o
+	   export.o tree-log.o acl.o free-space-cache.o zlib.o \
+	   compression.o delayed-ref.o relocation.o
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index cbba000dccb..603972576f0 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -351,9 +351,4 @@ int btrfs_init_acl(struct inode *inode, struct inode *dir)
 	return 0;
 }
 
-int btrfs_check_acl(struct inode *inode, int mask)
-{
-	return 0;
-}
-
 #endif /* CONFIG_FS_POSIX_ACL */
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 502c3d61de6..7f88628a1a7 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -294,10 +294,10 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
 		INIT_LIST_HEAD(&worker->worker_list);
 		spin_lock_init(&worker->lock);
 		atomic_set(&worker->num_pending, 0);
+		worker->workers = workers;
 		worker->task = kthread_run(worker_loop, worker,
 					   "btrfs-%s-%d", workers->name,
 					   workers->num_workers + i);
-		worker->workers = workers;
 		if (IS_ERR(worker->task)) {
 			kfree(worker);
 			ret = PTR_ERR(worker->task);
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index b30986f00b9..acb4f351758 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -72,6 +72,9 @@ struct btrfs_inode {
 	 */
 	struct list_head ordered_operations;
 
+	/* node for the red-black tree that links inodes in subvolume root */
+	struct rb_node rb_node;
+
 	/* the space_info for where this inode's data allocations are done */
 	struct btrfs_space_info *space_info;
 
@@ -154,5 +157,4 @@ static inline void btrfs_i_size_write(struct inode *inode, u64 size)
 	BTRFS_I(inode)->disk_i_size = size;
 }
 
-
 #endif
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index ab07627084f..de1e2fd3208 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -123,7 +123,7 @@ static int check_compressed_csum(struct inode *inode,
 	u32 csum;
 	u32 *cb_sum = &cb->sums;
 
-	if (btrfs_test_flag(inode, NODATASUM))
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
 		return 0;
 
 	for (i = 0; i < cb->nr_pages; i++) {
@@ -670,7 +670,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
 			 */
 			atomic_inc(&cb->pending_bios);
 
-			if (!btrfs_test_flag(inode, NODATASUM)) {
+			if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) {
 				btrfs_lookup_bio_sums(root, inode, comp_bio,
 						      sums);
 			}
@@ -697,7 +697,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
 	ret = btrfs_bio_wq_end_io(root->fs_info, comp_bio, 0);
 	BUG_ON(ret);
 
-	if (!btrfs_test_flag(inode, NODATASUM))
+	if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM))
 		btrfs_lookup_bio_sums(root, inode, comp_bio, sums);
 
 	ret = btrfs_map_bio(root, READ, comp_bio, mirror_num, 0);
diff --git a/fs/btrfs/crc32c.h b/fs/btrfs/crc32c.h
deleted file mode 100644
index 6e1b3de3670..00000000000
--- a/fs/btrfs/crc32c.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2008 Oracle.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License v2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- */
-
-#ifndef __BTRFS_CRC32C__
-#define __BTRFS_CRC32C__
-#include <linux/crc32c.h>
-
-/*
- * this file used to do more for selecting the HW version of crc32c,
- * perhaps it will one day again soon.
- */
-#define btrfs_crc32c(seed, data, length) crc32c(seed, data, length)
-#endif
-
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index a99f1c2a710..60a45f3a4e9 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -197,14 +197,7 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 	u32 nritems;
 	int ret = 0;
 	int level;
-	struct btrfs_root *new_root;
-
-	new_root = kmalloc(sizeof(*new_root), GFP_NOFS);
-	if (!new_root)
-		return -ENOMEM;
-
-	memcpy(new_root, root, sizeof(*new_root));
-	new_root->root_key.objectid = new_root_objectid;
+	struct btrfs_disk_key disk_key;
 
 	WARN_ON(root->ref_cows && trans->transid !=
 		root->fs_info->running_transaction->transid);
@@ -212,28 +205,37 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 
 	level = btrfs_header_level(buf);
 	nritems = btrfs_header_nritems(buf);
+	if (level == 0)
+		btrfs_item_key(buf, &disk_key, 0);
+	else
+		btrfs_node_key(buf, &disk_key, 0);
 
-	cow = btrfs_alloc_free_block(trans, new_root, buf->len, 0,
-				     new_root_objectid, trans->transid,
-				     level, buf->start, 0);
-	if (IS_ERR(cow)) {
-		kfree(new_root);
+	cow = btrfs_alloc_free_block(trans, root, buf->len, 0,
+				     new_root_objectid, &disk_key, level,
+				     buf->start, 0);
+	if (IS_ERR(cow))
 		return PTR_ERR(cow);
-	}
 
 	copy_extent_buffer(cow, buf, 0, 0, cow->len);
 	btrfs_set_header_bytenr(cow, cow->start);
 	btrfs_set_header_generation(cow, trans->transid);
-	btrfs_set_header_owner(cow, new_root_objectid);
-	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN);
+	btrfs_set_header_backref_rev(cow, BTRFS_MIXED_BACKREF_REV);
+	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN |
+				     BTRFS_HEADER_FLAG_RELOC);
+	if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
+		btrfs_set_header_flag(cow, BTRFS_HEADER_FLAG_RELOC);
+	else
+		btrfs_set_header_owner(cow, new_root_objectid);
 
 	write_extent_buffer(cow, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(cow),
 			    BTRFS_FSID_SIZE);
 
 	WARN_ON(btrfs_header_generation(buf) > trans->transid);
-	ret = btrfs_inc_ref(trans, new_root, buf, cow, NULL);
-	kfree(new_root);
+	if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
+		ret = btrfs_inc_ref(trans, root, cow, 1);
+	else
+		ret = btrfs_inc_ref(trans, root, cow, 0);
 
 	if (ret)
 		return ret;
@@ -244,6 +246,125 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 }
 
 /*
+ * check if the tree block can be shared by multiple trees
+ */
+int btrfs_block_can_be_shared(struct btrfs_root *root,
+			      struct extent_buffer *buf)
+{
+	/*
+	 * Tree blocks not in refernece counted trees and tree roots
+	 * are never shared. If a block was allocated after the last
+	 * snapshot and the block was not allocated by tree relocation,
+	 * we know the block is not shared.
+	 */
+	if (root->ref_cows &&
+	    buf != root->node && buf != root->commit_root &&
+	    (btrfs_header_generation(buf) <=
+	     btrfs_root_last_snapshot(&root->root_item) ||
+	     btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
+		return 1;
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (root->ref_cows &&
+	    btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
+		return 1;
+#endif
+	return 0;
+}
+
+static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
+				       struct btrfs_root *root,
+				       struct extent_buffer *buf,
+				       struct extent_buffer *cow)
+{
+	u64 refs;
+	u64 owner;
+	u64 flags;
+	u64 new_flags = 0;
+	int ret;
+
+	/*
+	 * Backrefs update rules:
+	 *
+	 * Always use full backrefs for extent pointers in tree block
+	 * allocated by tree relocation.
+	 *
+	 * If a shared tree block is no longer referenced by its owner
+	 * tree (btrfs_header_owner(buf) == root->root_key.objectid),
+	 * use full backrefs for extent pointers in tree block.
+	 *
+	 * If a tree block is been relocating
+	 * (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID),
+	 * use full backrefs for extent pointers in tree block.
+	 * The reason for this is some operations (such as drop tree)
+	 * are only allowed for blocks use full backrefs.
+	 */
+
+	if (btrfs_block_can_be_shared(root, buf)) {
+		ret = btrfs_lookup_extent_info(trans, root, buf->start,
+					       buf->len, &refs, &flags);
+		BUG_ON(ret);
+		BUG_ON(refs == 0);
+	} else {
+		refs = 1;
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
+		    btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
+			flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+		else
+			flags = 0;
+	}
+
+	owner = btrfs_header_owner(buf);
+	BUG_ON(owner == BTRFS_TREE_RELOC_OBJECTID &&
+	       !(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+
+	if (refs > 1) {
+		if ((owner == root->root_key.objectid ||
+		     root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) &&
+		    !(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)) {
+			ret = btrfs_inc_ref(trans, root, buf, 1);
+			BUG_ON(ret);
+
+			if (root->root_key.objectid ==
+			    BTRFS_TREE_RELOC_OBJECTID) {
+				ret = btrfs_dec_ref(trans, root, buf, 0);
+				BUG_ON(ret);
+				ret = btrfs_inc_ref(trans, root, cow, 1);
+				BUG_ON(ret);
+			}
+			new_flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
+		} else {
+
+			if (root->root_key.objectid ==
+			    BTRFS_TREE_RELOC_OBJECTID)
+				ret = btrfs_inc_ref(trans, root, cow, 1);
+			else
+				ret = btrfs_inc_ref(trans, root, cow, 0);
+			BUG_ON(ret);
+		}
+		if (new_flags != 0) {
+			ret = btrfs_set_disk_extent_flags(trans, root,
+							  buf->start,
+							  buf->len,
+							  new_flags, 0);
+			BUG_ON(ret);
+		}
+	} else {
+		if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
+			if (root->root_key.objectid ==
+			    BTRFS_TREE_RELOC_OBJECTID)
+				ret = btrfs_inc_ref(trans, root, cow, 1);
+			else
+				ret = btrfs_inc_ref(trans, root, cow, 0);
+			BUG_ON(ret);
+			ret = btrfs_dec_ref(trans, root, buf, 1);
+			BUG_ON(ret);
+		}
+		clean_tree_block(trans, root, buf);
+	}
+	return 0;
+}
+
+/*
  * does the dirty work in cow of a single block.  The parent block (if
  * supplied) is updated to point to the new cow copy.  The new buffer is marked
  * dirty and returned locked.  If you modify the block it needs to be marked
@@ -262,34 +383,39 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 			     struct extent_buffer **cow_ret,
 			     u64 search_start, u64 empty_size)
 {
-	u64 parent_start;
+	struct btrfs_disk_key disk_key;
 	struct extent_buffer *cow;
-	u32 nritems;
-	int ret = 0;
 	int level;
 	int unlock_orig = 0;
+	u64 parent_start;
 
 	if (*cow_ret == buf)
 		unlock_orig = 1;
 
 	btrfs_assert_tree_locked(buf);
 
-	if (parent)
-		parent_start = parent->start;
-	else
-		parent_start = 0;
-
 	WARN_ON(root->ref_cows && trans->transid !=
 		root->fs_info->running_transaction->transid);
 	WARN_ON(root->ref_cows && trans->transid != root->last_trans);
 
 	level = btrfs_header_level(buf);
-	nritems = btrfs_header_nritems(buf);
 
-	cow = btrfs_alloc_free_block(trans, root, buf->len,
-				     parent_start, root->root_key.objectid,
-				     trans->transid, level,
-				     search_start, empty_size);
+	if (level == 0)
+		btrfs_item_key(buf, &disk_key, 0);
+	else
+		btrfs_node_key(buf, &disk_key, 0);
+
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
+		if (parent)
+			parent_start = parent->start;
+		else
+			parent_start = 0;
+	} else
+		parent_start = 0;
+
+	cow = btrfs_alloc_free_block(trans, root, buf->len, parent_start,
+				     root->root_key.objectid, &disk_key,
+				     level, search_start, empty_size);
 	if (IS_ERR(cow))
 		return PTR_ERR(cow);
 
@@ -298,83 +424,53 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 	copy_extent_buffer(cow, buf, 0, 0, cow->len);
 	btrfs_set_header_bytenr(cow, cow->start);
 	btrfs_set_header_generation(cow, trans->transid);
-	btrfs_set_header_owner(cow, root->root_key.objectid);
-	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN);
+	btrfs_set_header_backref_rev(cow, BTRFS_MIXED_BACKREF_REV);
+	btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN |
+				     BTRFS_HEADER_FLAG_RELOC);
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		btrfs_set_header_flag(cow, BTRFS_HEADER_FLAG_RELOC);
+	else
+		btrfs_set_header_owner(cow, root->root_key.objectid);
 
 	write_extent_buffer(cow, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(cow),
 			    BTRFS_FSID_SIZE);
 
-	WARN_ON(btrfs_header_generation(buf) > trans->transid);
-	if (btrfs_header_generation(buf) != trans->transid) {
-		u32 nr_extents;
-		ret = btrfs_inc_ref(trans, root, buf, cow, &nr_extents);
-		if (ret)
-			return ret;
-
-		ret = btrfs_cache_ref(trans, root, buf, nr_extents);
-		WARN_ON(ret);
-	} else if (btrfs_header_owner(buf) == BTRFS_TREE_RELOC_OBJECTID) {
-		/*
-		 * There are only two places that can drop reference to
-		 * tree blocks owned by living reloc trees, one is here,
-		 * the other place is btrfs_drop_subtree. In both places,
-		 * we check reference count while tree block is locked.
-		 * Furthermore, if reference count is one, it won't get
-		 * increased by someone else.
-		 */
-		u32 refs;
-		ret = btrfs_lookup_extent_ref(trans, root, buf->start,
-					      buf->len, &refs);
-		BUG_ON(ret);
-		if (refs == 1) {
-			ret = btrfs_update_ref(trans, root, buf, cow,
-					       0, nritems);
-			clean_tree_block(trans, root, buf);
-		} else {
-			ret = btrfs_inc_ref(trans, root, buf, cow, NULL);
-		}
-		BUG_ON(ret);
-	} else {
-		ret = btrfs_update_ref(trans, root, buf, cow, 0, nritems);
-		if (ret)
-			return ret;
-		clean_tree_block(trans, root, buf);
-	}
-
-	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
-		ret = btrfs_reloc_tree_cache_ref(trans, root, cow, buf->start);
-		WARN_ON(ret);
-	}
+	update_ref_for_cow(trans, root, buf, cow);
 
 	if (buf == root->node) {
 		WARN_ON(parent && parent != buf);
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
+		    btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
+			parent_start = buf->start;
+		else
+			parent_start = 0;
 
 		spin_lock(&root->node_lock);
 		root->node = cow;
 		extent_buffer_get(cow);
 		spin_unlock(&root->node_lock);
 
-		if (buf != root->commit_root) {
-			btrfs_free_extent(trans, root, buf->start,
-					  buf->len, buf->start,
-					  root->root_key.objectid,
-					  btrfs_header_generation(buf),
-					  level, 1);
-		}
+		btrfs_free_extent(trans, root, buf->start, buf->len,
+				  parent_start, root->root_key.objectid,
+				  level, 0);
 		free_extent_buffer(buf);
 		add_root_to_dirty_list(root);
 	} else {
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+			parent_start = parent->start;
+		else
+			parent_start = 0;
+
+		WARN_ON(trans->transid != btrfs_header_generation(parent));
 		btrfs_set_node_blockptr(parent, parent_slot,
 					cow->start);
-		WARN_ON(trans->transid == 0);
 		btrfs_set_node_ptr_generation(parent, parent_slot,
 					      trans->transid);
 		btrfs_mark_buffer_dirty(parent);
-		WARN_ON(btrfs_header_generation(parent) != trans->transid);
 		btrfs_free_extent(trans, root, buf->start, buf->len,
-				  parent_start, btrfs_header_owner(parent),
-				  btrfs_header_generation(parent), level, 1);
+				  parent_start, root->root_key.objectid,
+				  level, 0);
 	}
 	if (unlock_orig)
 		btrfs_tree_unlock(buf);
@@ -384,6 +480,18 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
+static inline int should_cow_block(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct extent_buffer *buf)
+{
+	if (btrfs_header_generation(buf) == trans->transid &&
+	    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) &&
+	    !(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID &&
+	      btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
+		return 0;
+	return 1;
+}
+
 /*
  * cows a single block, see __btrfs_cow_block for the real work.
  * This version of it has extra checks so that a block isn't cow'd more than
@@ -411,9 +519,7 @@ noinline int btrfs_cow_block(struct btrfs_trans_handle *trans,
 		WARN_ON(1);
 	}
 
-	if (btrfs_header_generation(buf) == trans->transid &&
-	    btrfs_header_owner(buf) == root->root_key.objectid &&
-	    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
+	if (!should_cow_block(trans, root, buf)) {
 		*cow_ret = buf;
 		return 0;
 	}
@@ -469,7 +575,7 @@ static int comp_keys(struct btrfs_disk_key *disk, struct btrfs_key *k2)
 /*
  * same as comp_keys only with two btrfs_key's
  */
-static int comp_cpu_keys(struct btrfs_key *k1, struct btrfs_key *k2)
+int btrfs_comp_cpu_keys(struct btrfs_key *k1, struct btrfs_key *k2)
 {
 	if (k1->objectid > k2->objectid)
 		return 1;
@@ -845,6 +951,12 @@ static int bin_search(struct extent_buffer *eb, struct btrfs_key *key,
 	return -1;
 }
 
+int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
+		     int level, int *slot)
+{
+	return bin_search(eb, key, level, slot);
+}
+
 /* given a node and slot number, this reads the blocks it points to.  The
  * extent buffer is returned with a reference taken (but unlocked).
  * NULL is returned on error.
@@ -921,13 +1033,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 		root->node = child;
 		spin_unlock(&root->node_lock);
 
-		ret = btrfs_update_extent_ref(trans, root, child->start,
-					      child->len,
-					      mid->start, child->start,
-					      root->root_key.objectid,
-					      trans->transid, level - 1);
-		BUG_ON(ret);
-
 		add_root_to_dirty_list(root);
 		btrfs_tree_unlock(child);
 
@@ -938,9 +1043,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 		/* once for the path */
 		free_extent_buffer(mid);
 		ret = btrfs_free_extent(trans, root, mid->start, mid->len,
-					mid->start, root->root_key.objectid,
-					btrfs_header_generation(mid),
-					level, 1);
+					0, root->root_key.objectid, level, 1);
 		/* once for the root ptr */
 		free_extent_buffer(mid);
 		return ret;
@@ -949,8 +1052,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 	    BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
 		return 0;
 
-	if (trans->transaction->delayed_refs.flushing &&
-	    btrfs_header_nritems(mid) > 2)
+	if (btrfs_header_nritems(mid) > 2)
 		return 0;
 
 	if (btrfs_header_nritems(mid) < 2)
@@ -998,7 +1100,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 			ret = wret;
 		if (btrfs_header_nritems(right) == 0) {
 			u64 bytenr = right->start;
-			u64 generation = btrfs_header_generation(parent);
 			u32 blocksize = right->len;
 
 			clean_tree_block(trans, root, right);
@@ -1010,9 +1111,9 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 			if (wret)
 				ret = wret;
 			wret = btrfs_free_extent(trans, root, bytenr,
-						 blocksize, parent->start,
-						 btrfs_header_owner(parent),
-						 generation, level, 1);
+						 blocksize, 0,
+						 root->root_key.objectid,
+						 level, 0);
 			if (wret)
 				ret = wret;
 		} else {
@@ -1047,7 +1148,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 	}
 	if (btrfs_header_nritems(mid) == 0) {
 		/* we've managed to empty the middle node, drop it */
-		u64 root_gen = btrfs_header_generation(parent);
 		u64 bytenr = mid->start;
 		u32 blocksize = mid->len;
 
@@ -1059,9 +1159,8 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 		if (wret)
 			ret = wret;
 		wret = btrfs_free_extent(trans, root, bytenr, blocksize,
-					 parent->start,
-					 btrfs_header_owner(parent),
-					 root_gen, level, 1);
+					 0, root->root_key.objectid,
+					 level, 0);
 		if (wret)
 			ret = wret;
 	} else {
@@ -1437,7 +1536,7 @@ noinline void btrfs_unlock_up_safe(struct btrfs_path *path, int level)
 {
 	int i;
 
-	if (path->keep_locks || path->lowest_level)
+	if (path->keep_locks)
 		return;
 
 	for (i = level; i < BTRFS_MAX_LEVEL; i++) {
@@ -1469,6 +1568,7 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	u32 blocksize;
 	struct extent_buffer *b = *eb_ret;
 	struct extent_buffer *tmp;
+	int ret;
 
 	blocknr = btrfs_node_blockptr(b, slot);
 	gen = btrfs_node_ptr_generation(b, slot);
@@ -1476,6 +1576,10 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 
 	tmp = btrfs_find_tree_block(root, blocknr, blocksize);
 	if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+		/*
+		 * we found an up to date block without sleeping, return
+		 * right away
+		 */
 		*eb_ret = tmp;
 		return 0;
 	}
@@ -1483,7 +1587,9 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	/*
 	 * reduce lock contention at high levels
 	 * of the btree by dropping locks before
-	 * we read.
+	 * we read.  Don't release the lock on the current
+	 * level because we need to walk this node to figure
+	 * out which blocks to read.
 	 */
 	btrfs_unlock_up_safe(p, level + 1);
 	btrfs_set_path_blocking(p);
@@ -1494,10 +1600,21 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 		reada_for_search(root, p, level, slot, key->objectid);
 
 	btrfs_release_path(NULL, p);
+
+	ret = -EAGAIN;
 	tmp = read_tree_block(root, blocknr, blocksize, gen);
-	if (tmp)
+	if (tmp) {
+		/*
+		 * If the read above didn't mark this buffer up to date,
+		 * it will never end up being up to date.  Set ret to EIO now
+		 * and give up so that our caller doesn't loop forever
+		 * on our EAGAINs.
+		 */
+		if (!btrfs_buffer_uptodate(tmp, 0))
+			ret = -EIO;
 		free_extent_buffer(tmp);
-	return -EAGAIN;
+	}
+	return ret;
 }
 
 /*
@@ -1534,7 +1651,7 @@ setup_nodes_for_search(struct btrfs_trans_handle *trans,
 		}
 		b = p->nodes[level];
 	} else if (ins_len < 0 && btrfs_header_nritems(b) <
-		   BTRFS_NODEPTRS_PER_BLOCK(root) / 4) {
+		   BTRFS_NODEPTRS_PER_BLOCK(root) / 2) {
 		int sret;
 
 		sret = reada_for_balance(root, p, level);
@@ -1596,10 +1713,17 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root
 		lowest_unlock = 2;
 
 again:
-	if (p->skip_locking)
-		b = btrfs_root_node(root);
-	else
-		b = btrfs_lock_root_node(root);
+	if (p->search_commit_root) {
+		b = root->commit_root;
+		extent_buffer_get(b);
+		if (!p->skip_locking)
+			btrfs_tree_lock(b);
+	} else {
+		if (p->skip_locking)
+			b = btrfs_root_node(root);
+		else
+			b = btrfs_lock_root_node(root);
+	}
 
 	while (b) {
 		level = btrfs_header_level(b);
@@ -1620,11 +1744,9 @@ again:
 			 * then we don't want to set the path blocking,
 			 * so we test it here
 			 */
-			if (btrfs_header_generation(b) == trans->transid &&
-			    btrfs_header_owner(b) == root->root_key.objectid &&
-			    !btrfs_header_flag(b, BTRFS_HEADER_FLAG_WRITTEN)) {
+			if (!should_cow_block(trans, root, b))
 				goto cow_done;
-			}
+
 			btrfs_set_path_blocking(p);
 
 			wret = btrfs_cow_block(trans, root, b,
@@ -1696,6 +1818,9 @@ cow_done:
 			if (ret == -EAGAIN)
 				goto again;
 
+			if (ret == -EIO)
+				goto done;
+
 			if (!p->skip_locking) {
 				int lret;
 
@@ -1738,141 +1863,11 @@ done:
 	 */
 	if (!p->leave_spinning)
 		btrfs_set_path_blocking(p);
+	if (ret < 0)
+		btrfs_release_path(root, p);
 	return ret;
 }
 
-int btrfs_merge_path(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root,
-		     struct btrfs_key *node_keys,
-		     u64 *nodes, int lowest_level)
-{
-	struct extent_buffer *eb;
-	struct extent_buffer *parent;
-	struct btrfs_key key;
-	u64 bytenr;
-	u64 generation;
-	u32 blocksize;
-	int level;
-	int slot;
-	int key_match;
-	int ret;
-
-	eb = btrfs_lock_root_node(root);
-	ret = btrfs_cow_block(trans, root, eb, NULL, 0, &eb);
-	BUG_ON(ret);
-
-	btrfs_set_lock_blocking(eb);
-
-	parent = eb;
-	while (1) {
-		level = btrfs_header_level(parent);
-		if (level == 0 || level <= lowest_level)
-			break;
-
-		ret = bin_search(parent, &node_keys[lowest_level], level,
-				 &slot);
-		if (ret && slot > 0)
-			slot--;
-
-		bytenr = btrfs_node_blockptr(parent, slot);
-		if (nodes[level - 1] == bytenr)
-			break;
-
-		blocksize = btrfs_level_size(root, level - 1);
-		generation = btrfs_node_ptr_generation(parent, slot);
-		btrfs_node_key_to_cpu(eb, &key, slot);
-		key_match = !memcmp(&key, &node_keys[level - 1], sizeof(key));
-
-		if (generation == trans->transid) {
-			eb = read_tree_block(root, bytenr, blocksize,
-					     generation);
-			btrfs_tree_lock(eb);
-			btrfs_set_lock_blocking(eb);
-		}
-
-		/*
-		 * if node keys match and node pointer hasn't been modified
-		 * in the running transaction, we can merge the path. for
-		 * blocks owened by reloc trees, the node pointer check is
-		 * skipped, this is because these blocks are fully controlled
-		 * by the space balance code, no one else can modify them.
-		 */
-		if (!nodes[level - 1] || !key_match ||
-		    (generation == trans->transid &&
-		     btrfs_header_owner(eb) != BTRFS_TREE_RELOC_OBJECTID)) {
-			if (level == 1 || level == lowest_level + 1) {
-				if (generation == trans->transid) {
-					btrfs_tree_unlock(eb);
-					free_extent_buffer(eb);
-				}
-				break;
-			}
-
-			if (generation != trans->transid) {
-				eb = read_tree_block(root, bytenr, blocksize,
-						generation);
-				btrfs_tree_lock(eb);
-				btrfs_set_lock_blocking(eb);
-			}
-
-			ret = btrfs_cow_block(trans, root, eb, parent, slot,
-					      &eb);
-			BUG_ON(ret);
-
-			if (root->root_key.objectid ==
-			    BTRFS_TREE_RELOC_OBJECTID) {
-				if (!nodes[level - 1]) {
-					nodes[level - 1] = eb->start;
-					memcpy(&node_keys[level - 1], &key,
-					       sizeof(node_keys[0]));
-				} else {
-					WARN_ON(1);
-				}
-			}
-
-			btrfs_tree_unlock(parent);
-			free_extent_buffer(parent);
-			parent = eb;
-			continue;
-		}
-
-		btrfs_set_node_blockptr(parent, slot, nodes[level - 1]);
-		btrfs_set_node_ptr_generation(parent, slot, trans->transid);
-		btrfs_mark_buffer_dirty(parent);
-
-		ret = btrfs_inc_extent_ref(trans, root,
-					nodes[level - 1],
-					blocksize, parent->start,
-					btrfs_header_owner(parent),
-					btrfs_header_generation(parent),
-					level - 1);
-		BUG_ON(ret);
-
-		/*
-		 * If the block was created in the running transaction,
-		 * it's possible this is the last reference to it, so we
-		 * should drop the subtree.
-		 */
-		if (generation == trans->transid) {
-			ret = btrfs_drop_subtree(trans, root, eb, parent);
-			BUG_ON(ret);
-			btrfs_tree_unlock(eb);
-			free_extent_buffer(eb);
-		} else {
-			ret = btrfs_free_extent(trans, root, bytenr,
-					blocksize, parent->start,
-					btrfs_header_owner(parent),
-					btrfs_header_generation(parent),
-					level - 1, 1);
-			BUG_ON(ret);
-		}
-		break;
-	}
-	btrfs_tree_unlock(parent);
-	free_extent_buffer(parent);
-	return 0;
-}
-
 /*
  * adjust the pointers going up the tree, starting at level
  * making sure the right key of each node is points to 'key'.
@@ -1998,9 +1993,6 @@ static int push_node_left(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(src);
 	btrfs_mark_buffer_dirty(dst);
 
-	ret = btrfs_update_ref(trans, root, src, dst, dst_nritems, push_items);
-	BUG_ON(ret);
-
 	return ret;
 }
 
@@ -2060,9 +2052,6 @@ static int balance_node_right(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(src);
 	btrfs_mark_buffer_dirty(dst);
 
-	ret = btrfs_update_ref(trans, root, src, dst, 0, push_items);
-	BUG_ON(ret);
-
 	return ret;
 }
 
@@ -2082,7 +2071,6 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
 	struct extent_buffer *c;
 	struct extent_buffer *old;
 	struct btrfs_disk_key lower_key;
-	int ret;
 
 	BUG_ON(path->nodes[level]);
 	BUG_ON(path->nodes[level-1] != root->node);
@@ -2094,16 +2082,17 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
 		btrfs_node_key(lower, &lower_key, 0);
 
 	c = btrfs_alloc_free_block(trans, root, root->nodesize, 0,
-				   root->root_key.objectid, trans->transid,
+				   root->root_key.objectid, &lower_key,
 				   level, root->node->start, 0);
 	if (IS_ERR(c))
 		return PTR_ERR(c);
 
-	memset_extent_buffer(c, 0, 0, root->nodesize);
+	memset_extent_buffer(c, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_nritems(c, 1);
 	btrfs_set_header_level(c, level);
 	btrfs_set_header_bytenr(c, c->start);
 	btrfs_set_header_generation(c, trans->transid);
+	btrfs_set_header_backref_rev(c, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(c, root->root_key.objectid);
 
 	write_extent_buffer(c, root->fs_info->fsid,
@@ -2128,12 +2117,6 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
 	root->node = c;
 	spin_unlock(&root->node_lock);
 
-	ret = btrfs_update_extent_ref(trans, root, lower->start,
-				      lower->len, lower->start, c->start,
-				      root->root_key.objectid,
-				      trans->transid, level - 1);
-	BUG_ON(ret);
-
 	/* the super has an extra ref to root->node */
 	free_extent_buffer(old);
 
@@ -2210,7 +2193,7 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 		ret = insert_new_root(trans, root, path, level + 1);
 		if (ret)
 			return ret;
-	} else if (!trans->transaction->delayed_refs.flushing) {
+	} else {
 		ret = push_nodes_for_insert(trans, root, path, level);
 		c = path->nodes[level];
 		if (!ret && btrfs_header_nritems(c) <
@@ -2221,20 +2204,21 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 	}
 
 	c_nritems = btrfs_header_nritems(c);
+	mid = (c_nritems + 1) / 2;
+	btrfs_node_key(c, &disk_key, mid);
 
-	split = btrfs_alloc_free_block(trans, root, root->nodesize,
-					path->nodes[level + 1]->start,
+	split = btrfs_alloc_free_block(trans, root, root->nodesize, 0,
 					root->root_key.objectid,
-					trans->transid, level, c->start, 0);
+					&disk_key, level, c->start, 0);
 	if (IS_ERR(split))
 		return PTR_ERR(split);
 
-	btrfs_set_header_flags(split, btrfs_header_flags(c));
+	memset_extent_buffer(split, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_level(split, btrfs_header_level(c));
 	btrfs_set_header_bytenr(split, split->start);
 	btrfs_set_header_generation(split, trans->transid);
+	btrfs_set_header_backref_rev(split, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(split, root->root_key.objectid);
-	btrfs_set_header_flags(split, 0);
 	write_extent_buffer(split, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(split),
 			    BTRFS_FSID_SIZE);
@@ -2242,7 +2226,6 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 			    (unsigned long)btrfs_header_chunk_tree_uuid(split),
 			    BTRFS_UUID_SIZE);
 
-	mid = (c_nritems + 1) / 2;
 
 	copy_extent_buffer(split, c,
 			   btrfs_node_key_ptr_offset(0),
@@ -2255,16 +2238,12 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(c);
 	btrfs_mark_buffer_dirty(split);
 
-	btrfs_node_key(split, &disk_key, 0);
 	wret = insert_ptr(trans, root, path, &disk_key, split->start,
 			  path->slots[level + 1] + 1,
 			  level + 1);
 	if (wret)
 		ret = wret;
 
-	ret = btrfs_update_ref(trans, root, c, split, 0, c_nritems - mid);
-	BUG_ON(ret);
-
 	if (path->slots[level] >= mid) {
 		path->slots[level] -= mid;
 		btrfs_tree_unlock(c);
@@ -2337,7 +2316,6 @@ static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 	u32 right_nritems;
 	u32 data_end;
 	u32 this_item_size;
-	int ret;
 
 	if (empty)
 		nr = 0;
@@ -2450,9 +2428,6 @@ static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 		btrfs_mark_buffer_dirty(left);
 	btrfs_mark_buffer_dirty(right);
 
-	ret = btrfs_update_ref(trans, root, left, right, 0, push_items);
-	BUG_ON(ret);
-
 	btrfs_item_key(right, &disk_key, 0);
 	btrfs_set_node_key(upper, &disk_key, slot + 1);
 	btrfs_mark_buffer_dirty(upper);
@@ -2697,10 +2672,6 @@ static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
 	if (right_nritems)
 		btrfs_mark_buffer_dirty(right);
 
-	ret = btrfs_update_ref(trans, root, right, left,
-			       old_left_nritems, push_items);
-	BUG_ON(ret);
-
 	btrfs_item_key(right, &disk_key, 0);
 	wret = fixup_low_keys(trans, root, path, &disk_key, 1);
 	if (wret)
@@ -2857,9 +2828,6 @@ static noinline int copy_for_split(struct btrfs_trans_handle *trans,
 	btrfs_mark_buffer_dirty(l);
 	BUG_ON(path->slots[0] != slot);
 
-	ret = btrfs_update_ref(trans, root, l, right, 0, nritems);
-	BUG_ON(ret);
-
 	if (mid <= slot) {
 		btrfs_tree_unlock(path->nodes[0]);
 		free_extent_buffer(path->nodes[0]);
@@ -2888,6 +2856,7 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 			       struct btrfs_path *path, int data_size,
 			       int extend)
 {
+	struct btrfs_disk_key disk_key;
 	struct extent_buffer *l;
 	u32 nritems;
 	int mid;
@@ -2895,12 +2864,11 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 	struct extent_buffer *right;
 	int ret = 0;
 	int wret;
-	int double_split;
+	int split;
 	int num_doubles = 0;
 
 	/* first try to make some room by pushing left and right */
-	if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY &&
-	    !trans->transaction->delayed_refs.flushing) {
+	if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
 		wret = push_leaf_right(trans, root, path, data_size, 0);
 		if (wret < 0)
 			return wret;
@@ -2922,16 +2890,53 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
 			return ret;
 	}
 again:
-	double_split = 0;
+	split = 1;
 	l = path->nodes[0];
 	slot = path->slots[0];
 	nritems = btrfs_header_nritems(l);
 	mid = (nritems + 1) / 2;
 
-	right = btrfs_alloc_free_block(trans, root, root->leafsize,
-					path->nodes[1]->start,
+	if (mid <= slot) {
+		if (nritems == 1 ||
+		    leaf_space_used(l, mid, nritems - mid) + data_size >
+			BTRFS_LEAF_DATA_SIZE(root)) {
+			if (slot >= nritems) {
+				split = 0;
+			} else {
+				mid = slot;
+				if (mid != nritems &&
+				    leaf_space_used(l, mid, nritems - mid) +
+				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					split = 2;
+				}
+			}
+		}
+	} else {
+		if (leaf_space_used(l, 0, mid) + data_size >
+			BTRFS_LEAF_DATA_SIZE(root)) {
+			if (!extend && data_size && slot == 0) {
+				split = 0;
+			} else if ((extend || !data_size) && slot == 0) {
+				mid = 1;
+			} else {
+				mid = slot;
+				if (mid != nritems &&
+				    leaf_space_used(l, mid, nritems - mid) +
+				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					split = 2 ;
+				}
+			}
+		}
+	}
+
+	if (split == 0)
+		btrfs_cpu_key_to_disk(&disk_key, ins_key);
+	else
+		btrfs_item_key(l, &disk_key, mid);
+
+	right = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
 					root->root_key.objectid,
-					trans->transid, 0, l->start, 0);
+					&disk_key, 0, l->start, 0);
 	if (IS_ERR(right)) {
 		BUG_ON(1);
 		return PTR_ERR(right);
@@ -2940,6 +2945,7 @@ again:
 	memset_extent_buffer(right, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_bytenr(right, right->start);
 	btrfs_set_header_generation(right, trans->transid);
+	btrfs_set_header_backref_rev(right, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(right, root->root_key.objectid);
 	btrfs_set_header_level(right, 0);
 	write_extent_buffer(right, root->fs_info->fsid,
@@ -2950,79 +2956,47 @@ again:
 			    (unsigned long)btrfs_header_chunk_tree_uuid(right),
 			    BTRFS_UUID_SIZE);
 
-	if (mid <= slot) {
-		if (nritems == 1 ||
-		    leaf_space_used(l, mid, nritems - mid) + data_size >
-			BTRFS_LEAF_DATA_SIZE(root)) {
-			if (slot >= nritems) {
-				struct btrfs_disk_key disk_key;
-
-				btrfs_cpu_key_to_disk(&disk_key, ins_key);
-				btrfs_set_header_nritems(right, 0);
-				wret = insert_ptr(trans, root, path,
-						  &disk_key, right->start,
-						  path->slots[1] + 1, 1);
-				if (wret)
-					ret = wret;
+	if (split == 0) {
+		if (mid <= slot) {
+			btrfs_set_header_nritems(right, 0);
+			wret = insert_ptr(trans, root, path,
+					  &disk_key, right->start,
+					  path->slots[1] + 1, 1);
+			if (wret)
+				ret = wret;
 
-				btrfs_tree_unlock(path->nodes[0]);
-				free_extent_buffer(path->nodes[0]);
-				path->nodes[0] = right;
-				path->slots[0] = 0;
-				path->slots[1] += 1;
-				btrfs_mark_buffer_dirty(right);
-				return ret;
-			}
-			mid = slot;
-			if (mid != nritems &&
-			    leaf_space_used(l, mid, nritems - mid) +
-			    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
-				double_split = 1;
-			}
-		}
-	} else {
-		if (leaf_space_used(l, 0, mid) + data_size >
-			BTRFS_LEAF_DATA_SIZE(root)) {
-			if (!extend && data_size && slot == 0) {
-				struct btrfs_disk_key disk_key;
-
-				btrfs_cpu_key_to_disk(&disk_key, ins_key);
-				btrfs_set_header_nritems(right, 0);
-				wret = insert_ptr(trans, root, path,
-						  &disk_key,
-						  right->start,
-						  path->slots[1], 1);
+			btrfs_tree_unlock(path->nodes[0]);
+			free_extent_buffer(path->nodes[0]);
+			path->nodes[0] = right;
+			path->slots[0] = 0;
+			path->slots[1] += 1;
+		} else {
+			btrfs_set_header_nritems(right, 0);
+			wret = insert_ptr(trans, root, path,
+					  &disk_key,
+					  right->start,
+					  path->slots[1], 1);
+			if (wret)
+				ret = wret;
+			btrfs_tree_unlock(path->nodes[0]);
+			free_extent_buffer(path->nodes[0]);
+			path->nodes[0] = right;
+			path->slots[0] = 0;
+			if (path->slots[1] == 0) {
+				wret = fixup_low_keys(trans, root,
+						path, &disk_key, 1);
 				if (wret)
 					ret = wret;
-				btrfs_tree_unlock(path->nodes[0]);
-				free_extent_buffer(path->nodes[0]);
-				path->nodes[0] = right;
-				path->slots[0] = 0;
-				if (path->slots[1] == 0) {
-					wret = fixup_low_keys(trans, root,
-						      path, &disk_key, 1);
-					if (wret)
-						ret = wret;
-				}
-				btrfs_mark_buffer_dirty(right);
-				return ret;
-			} else if ((extend || !data_size) && slot == 0) {
-				mid = 1;
-			} else {
-				mid = slot;
-				if (mid != nritems &&
-				    leaf_space_used(l, mid, nritems - mid) +
-				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
-					double_split = 1;
-				}
 			}
 		}
+		btrfs_mark_buffer_dirty(right);
+		return ret;
 	}
 
 	ret = copy_for_split(trans, root, path, l, right, slot, mid, nritems);
 	BUG_ON(ret);
 
-	if (double_split) {
+	if (split == 2) {
 		BUG_ON(num_doubles != 0);
 		num_doubles++;
 		goto again;
@@ -3424,7 +3398,7 @@ int btrfs_insert_some_items(struct btrfs_trans_handle *trans,
 		/* figure out how many keys we can insert in here */
 		total_data = data_size[0];
 		for (i = 1; i < nr; i++) {
-			if (comp_cpu_keys(&found_key, cpu_key + i) <= 0)
+			if (btrfs_comp_cpu_keys(&found_key, cpu_key + i) <= 0)
 				break;
 			total_data += data_size[i];
 		}
@@ -3722,9 +3696,7 @@ static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 
 /*
  * a helper function to delete the leaf pointed to by path->slots[1] and
- * path->nodes[1].  bytenr is the node block pointer, but since the callers
- * already know it, it is faster to have them pass it down than to
- * read it out of the node again.
+ * path->nodes[1].
  *
  * This deletes the pointer in path->nodes[1] and frees the leaf
  * block extent.  zero is returned if it all worked out, < 0 otherwise.
@@ -3732,15 +3704,14 @@ static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
  * The path must have already been setup for deleting the leaf, including
  * all the proper balancing.  path->nodes[1] must be locked.
  */
-noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root,
-			    struct btrfs_path *path, u64 bytenr)
+static noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct btrfs_path *path,
+				   struct extent_buffer *leaf)
 {
 	int ret;
-	u64 root_gen = btrfs_header_generation(path->nodes[1]);
-	u64 parent_start = path->nodes[1]->start;
-	u64 parent_owner = btrfs_header_owner(path->nodes[1]);
 
+	WARN_ON(btrfs_header_generation(leaf) != trans->transid);
 	ret = del_ptr(trans, root, path, 1, path->slots[1]);
 	if (ret)
 		return ret;
@@ -3751,10 +3722,8 @@ noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
 	 */
 	btrfs_unlock_up_safe(path, 0);
 
-	ret = btrfs_free_extent(trans, root, bytenr,
-				btrfs_level_size(root, 0),
-				parent_start, parent_owner,
-				root_gen, 0, 1);
+	ret = btrfs_free_extent(trans, root, leaf->start, leaf->len,
+				0, root->root_key.objectid, 0, 0);
 	return ret;
 }
 /*
@@ -3822,7 +3791,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		if (leaf == root->node) {
 			btrfs_set_header_level(leaf, 0);
 		} else {
-			ret = btrfs_del_leaf(trans, root, path, leaf->start);
+			ret = btrfs_del_leaf(trans, root, path, leaf);
 			BUG_ON(ret);
 		}
 	} else {
@@ -3838,8 +3807,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		}
 
 		/* delete the leaf if it is mostly empty */
-		if (used < BTRFS_LEAF_DATA_SIZE(root) / 4 &&
-		    !trans->transaction->delayed_refs.flushing) {
+		if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
 			/* push_leaf_left fixes the path.
 			 * make sure the path still points to our leaf
 			 * for possible call to del_ptr below
@@ -3861,8 +3829,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 
 			if (btrfs_header_nritems(leaf) == 0) {
 				path->slots[1] = slot;
-				ret = btrfs_del_leaf(trans, root, path,
-						     leaf->start);
+				ret = btrfs_del_leaf(trans, root, path, leaf);
 				BUG_ON(ret);
 				free_extent_buffer(leaf);
 			} else {
@@ -4212,6 +4179,11 @@ again:
 		if (ret == -EAGAIN)
 			goto again;
 
+		if (ret < 0) {
+			btrfs_release_path(root, path);
+			goto done;
+		}
+
 		if (!path->skip_locking) {
 			ret = btrfs_try_spin_lock(next);
 			if (!ret) {
@@ -4246,6 +4218,11 @@ again:
 		if (ret == -EAGAIN)
 			goto again;
 
+		if (ret < 0) {
+			btrfs_release_path(root, path);
+			goto done;
+		}
+
 		if (!path->skip_locking) {
 			btrfs_assert_tree_locked(path->nodes[level]);
 			ret = btrfs_try_spin_lock(next);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 4414a5d9983..03441a99ea3 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -45,6 +45,8 @@ struct btrfs_ordered_sum;
 
 #define BTRFS_MAX_LEVEL 8
 
+#define BTRFS_COMPAT_EXTENT_TREE_V0
+
 /*
  * files bigger than this get some pre-flushing when they are added
  * to the ordered operations list.  That way we limit the total
@@ -267,7 +269,18 @@ static inline unsigned long btrfs_chunk_item_size(int num_stripes)
 }
 
 #define BTRFS_FSID_SIZE 16
-#define BTRFS_HEADER_FLAG_WRITTEN (1 << 0)
+#define BTRFS_HEADER_FLAG_WRITTEN	(1ULL << 0)
+#define BTRFS_HEADER_FLAG_RELOC		(1ULL << 1)
+#define BTRFS_SUPER_FLAG_SEEDING	(1ULL << 32)
+#define BTRFS_SUPER_FLAG_METADUMP	(1ULL << 33)
+
+#define BTRFS_BACKREF_REV_MAX		256
+#define BTRFS_BACKREF_REV_SHIFT		56
+#define BTRFS_BACKREF_REV_MASK		(((u64)BTRFS_BACKREF_REV_MAX - 1) << \
+					 BTRFS_BACKREF_REV_SHIFT)
+
+#define BTRFS_OLD_BACKREF_REV		0
+#define BTRFS_MIXED_BACKREF_REV		1
 
 /*
  * every tree block (leaf or node) starts with this header.
@@ -296,7 +309,6 @@ struct btrfs_header {
 					sizeof(struct btrfs_item) - \
 					sizeof(struct btrfs_file_extent_item))
 
-#define BTRFS_SUPER_FLAG_SEEDING (1ULL << 32)
 
 /*
  * this is a very generous portion of the super block, giving us
@@ -355,9 +367,12 @@ struct btrfs_super_block {
  * Compat flags that we support.  If any incompat flags are set other than the
  * ones specified below then we will fail to mount
  */
-#define BTRFS_FEATURE_COMPAT_SUPP	0x0
-#define BTRFS_FEATURE_COMPAT_RO_SUPP	0x0
-#define BTRFS_FEATURE_INCOMPAT_SUPP	0x0
+#define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF	(1ULL << 0)
+
+#define BTRFS_FEATURE_COMPAT_SUPP		0ULL
+#define BTRFS_FEATURE_COMPAT_RO_SUPP		0ULL
+#define BTRFS_FEATURE_INCOMPAT_SUPP		\
+	BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF
 
 /*
  * A leaf is full of items. offset and size tell us where to find
@@ -421,23 +436,65 @@ struct btrfs_path {
 	unsigned int keep_locks:1;
 	unsigned int skip_locking:1;
 	unsigned int leave_spinning:1;
+	unsigned int search_commit_root:1;
 };
 
 /*
  * items in the extent btree are used to record the objectid of the
  * owner of the block and the number of references
  */
+
 struct btrfs_extent_item {
+	__le64 refs;
+	__le64 generation;
+	__le64 flags;
+} __attribute__ ((__packed__));
+
+struct btrfs_extent_item_v0 {
 	__le32 refs;
 } __attribute__ ((__packed__));
 
-struct btrfs_extent_ref {
+#define BTRFS_MAX_EXTENT_ITEM_SIZE(r) ((BTRFS_LEAF_DATA_SIZE(r) >> 4) - \
+					sizeof(struct btrfs_item))
+
+#define BTRFS_EXTENT_FLAG_DATA		(1ULL << 0)
+#define BTRFS_EXTENT_FLAG_TREE_BLOCK	(1ULL << 1)
+
+/* following flags only apply to tree blocks */
+
+/* use full backrefs for extent pointers in the block */
+#define BTRFS_BLOCK_FLAG_FULL_BACKREF	(1ULL << 8)
+
+struct btrfs_tree_block_info {
+	struct btrfs_disk_key key;
+	u8 level;
+} __attribute__ ((__packed__));
+
+struct btrfs_extent_data_ref {
+	__le64 root;
+	__le64 objectid;
+	__le64 offset;
+	__le32 count;
+} __attribute__ ((__packed__));
+
+struct btrfs_shared_data_ref {
+	__le32 count;
+} __attribute__ ((__packed__));
+
+struct btrfs_extent_inline_ref {
+	u8 type;
+	u64 offset;
+} __attribute__ ((__packed__));
+
+/* old style backrefs item */
+struct btrfs_extent_ref_v0 {
 	__le64 root;
 	__le64 generation;
 	__le64 objectid;
-	__le32 num_refs;
+	__le32 count;
 } __attribute__ ((__packed__));
 
+
 /* dev extents record free space on individual devices.  The owner
  * field points back to the chunk allocation mapping tree that allocated
  * the extent.  The chunk tree uuid field is a way to double check the owner
@@ -695,12 +752,7 @@ struct btrfs_block_group_cache {
 	struct list_head cluster_list;
 };
 
-struct btrfs_leaf_ref_tree {
-	struct rb_root root;
-	struct list_head list;
-	spinlock_t lock;
-};
-
+struct reloc_control;
 struct btrfs_device;
 struct btrfs_fs_devices;
 struct btrfs_fs_info {
@@ -831,18 +883,11 @@ struct btrfs_fs_info {
 	struct task_struct *cleaner_kthread;
 	int thread_pool_size;
 
-	/* tree relocation relocated fields */
-	struct list_head dead_reloc_roots;
-	struct btrfs_leaf_ref_tree reloc_ref_tree;
-	struct btrfs_leaf_ref_tree shared_ref_tree;
-
 	struct kobject super_kobj;
 	struct completion kobj_unregister;
 	int do_barriers;
 	int closing;
 	int log_root_recovering;
-	atomic_t throttles;
-	atomic_t throttle_gen;
 
 	u64 total_pinned;
 
@@ -861,6 +906,8 @@ struct btrfs_fs_info {
 	 */
 	struct list_head space_info;
 
+	struct reloc_control *reloc_ctl;
+
 	spinlock_t delalloc_lock;
 	spinlock_t new_trans_lock;
 	u64 delalloc_bytes;
@@ -891,7 +938,6 @@ struct btrfs_fs_info {
  * in ram representation of the tree.  extent_root is used for all allocations
  * and for the extent tree extent_root root.
  */
-struct btrfs_dirty_root;
 struct btrfs_root {
 	struct extent_buffer *node;
 
@@ -899,9 +945,6 @@ struct btrfs_root {
 	spinlock_t node_lock;
 
 	struct extent_buffer *commit_root;
-	struct btrfs_leaf_ref_tree *ref_tree;
-	struct btrfs_leaf_ref_tree ref_tree_struct;
-	struct btrfs_dirty_root *dirty_root;
 	struct btrfs_root *log_root;
 	struct btrfs_root *reloc_root;
 
@@ -952,10 +995,15 @@ struct btrfs_root {
 	/* the dirty list is only used by non-reference counted roots */
 	struct list_head dirty_list;
 
+	struct list_head root_list;
+
 	spinlock_t list_lock;
-	struct list_head dead_list;
 	struct list_head orphan_list;
 
+	spinlock_t inode_lock;
+	/* red-black tree that keeps track of in-memory inodes */
+	struct rb_root inode_tree;
+
 	/*
 	 * right now this just gets used so that a root has its own devid
 	 * for stat.  It may be used for more later
@@ -1017,7 +1065,16 @@ struct btrfs_root {
  * are used, and how many references there are to each block
  */
 #define BTRFS_EXTENT_ITEM_KEY	168
-#define BTRFS_EXTENT_REF_KEY	180
+
+#define BTRFS_TREE_BLOCK_REF_KEY	176
+
+#define BTRFS_EXTENT_DATA_REF_KEY	178
+
+#define BTRFS_EXTENT_REF_V0_KEY		180
+
+#define BTRFS_SHARED_BLOCK_REF_KEY	182
+
+#define BTRFS_SHARED_DATA_REF_KEY	184
 
 /*
  * block groups give us hints into the extent allocation trees.  Which
@@ -1043,6 +1100,8 @@ struct btrfs_root {
 #define BTRFS_MOUNT_COMPRESS		(1 << 5)
 #define BTRFS_MOUNT_NOTREELOG           (1 << 6)
 #define BTRFS_MOUNT_FLUSHONCOMMIT       (1 << 7)
+#define BTRFS_MOUNT_SSD_SPREAD		(1 << 8)
+#define BTRFS_MOUNT_NOSSD		(1 << 9)
 
 #define btrfs_clear_opt(o, opt)		((o) &= ~BTRFS_MOUNT_##opt)
 #define btrfs_set_opt(o, opt)		((o) |= BTRFS_MOUNT_##opt)
@@ -1056,12 +1115,14 @@ struct btrfs_root {
 #define BTRFS_INODE_READONLY		(1 << 2)
 #define BTRFS_INODE_NOCOMPRESS		(1 << 3)
 #define BTRFS_INODE_PREALLOC		(1 << 4)
-#define btrfs_clear_flag(inode, flag)	(BTRFS_I(inode)->flags &= \
-					 ~BTRFS_INODE_##flag)
-#define btrfs_set_flag(inode, flag)	(BTRFS_I(inode)->flags |= \
-					 BTRFS_INODE_##flag)
-#define btrfs_test_flag(inode, flag)	(BTRFS_I(inode)->flags & \
-					 BTRFS_INODE_##flag)
+#define BTRFS_INODE_SYNC		(1 << 5)
+#define BTRFS_INODE_IMMUTABLE		(1 << 6)
+#define BTRFS_INODE_APPEND		(1 << 7)
+#define BTRFS_INODE_NODUMP		(1 << 8)
+#define BTRFS_INODE_NOATIME		(1 << 9)
+#define BTRFS_INODE_DIRSYNC		(1 << 10)
+
+
 /* some macros to generate set/get funcs for the struct fields.  This
  * assumes there is a lefoo_to_cpu for every type, so lets make a simple
  * one for u8:
@@ -1317,24 +1378,67 @@ static inline u8 *btrfs_dev_extent_chunk_tree_uuid(struct btrfs_dev_extent *dev)
 	return (u8 *)((unsigned long)dev + ptr);
 }
 
-/* struct btrfs_extent_ref */
-BTRFS_SETGET_FUNCS(ref_root, struct btrfs_extent_ref, root, 64);
-BTRFS_SETGET_FUNCS(ref_generation, struct btrfs_extent_ref, generation, 64);
-BTRFS_SETGET_FUNCS(ref_objectid, struct btrfs_extent_ref, objectid, 64);
-BTRFS_SETGET_FUNCS(ref_num_refs, struct btrfs_extent_ref, num_refs, 32);
+BTRFS_SETGET_FUNCS(extent_refs, struct btrfs_extent_item, refs, 64);
+BTRFS_SETGET_FUNCS(extent_generation, struct btrfs_extent_item,
+		   generation, 64);
+BTRFS_SETGET_FUNCS(extent_flags, struct btrfs_extent_item, flags, 64);
 
-BTRFS_SETGET_STACK_FUNCS(stack_ref_root, struct btrfs_extent_ref, root, 64);
-BTRFS_SETGET_STACK_FUNCS(stack_ref_generation, struct btrfs_extent_ref,
-			 generation, 64);
-BTRFS_SETGET_STACK_FUNCS(stack_ref_objectid, struct btrfs_extent_ref,
-			 objectid, 64);
-BTRFS_SETGET_STACK_FUNCS(stack_ref_num_refs, struct btrfs_extent_ref,
-			 num_refs, 32);
+BTRFS_SETGET_FUNCS(extent_refs_v0, struct btrfs_extent_item_v0, refs, 32);
+
+
+BTRFS_SETGET_FUNCS(tree_block_level, struct btrfs_tree_block_info, level, 8);
+
+static inline void btrfs_tree_block_key(struct extent_buffer *eb,
+					struct btrfs_tree_block_info *item,
+					struct btrfs_disk_key *key)
+{
+	read_eb_member(eb, item, struct btrfs_tree_block_info, key, key);
+}
+
+static inline void btrfs_set_tree_block_key(struct extent_buffer *eb,
+					    struct btrfs_tree_block_info *item,
+					    struct btrfs_disk_key *key)
+{
+	write_eb_member(eb, item, struct btrfs_tree_block_info, key, key);
+}
+
+BTRFS_SETGET_FUNCS(extent_data_ref_root, struct btrfs_extent_data_ref,
+		   root, 64);
+BTRFS_SETGET_FUNCS(extent_data_ref_objectid, struct btrfs_extent_data_ref,
+		   objectid, 64);
+BTRFS_SETGET_FUNCS(extent_data_ref_offset, struct btrfs_extent_data_ref,
+		   offset, 64);
+BTRFS_SETGET_FUNCS(extent_data_ref_count, struct btrfs_extent_data_ref,
+		   count, 32);
+
+BTRFS_SETGET_FUNCS(shared_data_ref_count, struct btrfs_shared_data_ref,
+		   count, 32);
 
-/* struct btrfs_extent_item */
-BTRFS_SETGET_FUNCS(extent_refs, struct btrfs_extent_item, refs, 32);
-BTRFS_SETGET_STACK_FUNCS(stack_extent_refs, struct btrfs_extent_item,
-			 refs, 32);
+BTRFS_SETGET_FUNCS(extent_inline_ref_type, struct btrfs_extent_inline_ref,
+		   type, 8);
+BTRFS_SETGET_FUNCS(extent_inline_ref_offset, struct btrfs_extent_inline_ref,
+		   offset, 64);
+
+static inline u32 btrfs_extent_inline_ref_size(int type)
+{
+	if (type == BTRFS_TREE_BLOCK_REF_KEY ||
+	    type == BTRFS_SHARED_BLOCK_REF_KEY)
+		return sizeof(struct btrfs_extent_inline_ref);
+	if (type == BTRFS_SHARED_DATA_REF_KEY)
+		return sizeof(struct btrfs_shared_data_ref) +
+		       sizeof(struct btrfs_extent_inline_ref);
+	if (type == BTRFS_EXTENT_DATA_REF_KEY)
+		return sizeof(struct btrfs_extent_data_ref) +
+		       offsetof(struct btrfs_extent_inline_ref, offset);
+	BUG();
+	return 0;
+}
+
+BTRFS_SETGET_FUNCS(ref_root_v0, struct btrfs_extent_ref_v0, root, 64);
+BTRFS_SETGET_FUNCS(ref_generation_v0, struct btrfs_extent_ref_v0,
+		   generation, 64);
+BTRFS_SETGET_FUNCS(ref_objectid_v0, struct btrfs_extent_ref_v0, objectid, 64);
+BTRFS_SETGET_FUNCS(ref_count_v0, struct btrfs_extent_ref_v0, count, 32);
 
 /* struct btrfs_node */
 BTRFS_SETGET_FUNCS(key_blockptr, struct btrfs_key_ptr, blockptr, 64);
@@ -1558,6 +1662,21 @@ static inline int btrfs_clear_header_flag(struct extent_buffer *eb, u64 flag)
 	return (flags & flag) == flag;
 }
 
+static inline int btrfs_header_backref_rev(struct extent_buffer *eb)
+{
+	u64 flags = btrfs_header_flags(eb);
+	return flags >> BTRFS_BACKREF_REV_SHIFT;
+}
+
+static inline void btrfs_set_header_backref_rev(struct extent_buffer *eb,
+						int rev)
+{
+	u64 flags = btrfs_header_flags(eb);
+	flags &= ~BTRFS_BACKREF_REV_MASK;
+	flags |= (u64)rev << BTRFS_BACKREF_REV_SHIFT;
+	btrfs_set_header_flags(eb, flags);
+}
+
 static inline u8 *btrfs_header_fsid(struct extent_buffer *eb)
 {
 	unsigned long ptr = offsetof(struct btrfs_header, fsid);
@@ -1790,39 +1909,32 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root, struct extent_buffer *leaf);
 int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root, u64 objectid, u64 bytenr);
+			  struct btrfs_root *root,
+			  u64 objectid, u64 offset, u64 bytenr);
 int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy);
 struct btrfs_block_group_cache *btrfs_lookup_block_group(
 						 struct btrfs_fs_info *info,
 						 u64 bytenr);
+void btrfs_put_block_group(struct btrfs_block_group_cache *cache);
 u64 btrfs_find_block_group(struct btrfs_root *root,
 			   u64 search_start, u64 search_hint, int owner);
 struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
-					     struct btrfs_root *root,
-					     u32 blocksize, u64 parent,
-					     u64 root_objectid,
-					     u64 ref_generation,
-					     int level,
-					     u64 hint,
-					     u64 empty_size);
+					struct btrfs_root *root, u32 blocksize,
+					u64 parent, u64 root_objectid,
+					struct btrfs_disk_key *key, int level,
+					u64 hint, u64 empty_size);
 struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
 					    struct btrfs_root *root,
 					    u64 bytenr, u32 blocksize,
 					    int level);
-int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
-		       struct btrfs_root *root,
-		       u64 num_bytes, u64 parent, u64 min_bytes,
-		       u64 root_objectid, u64 ref_generation,
-		       u64 owner, u64 empty_size, u64 hint_byte,
-		       u64 search_end, struct btrfs_key *ins, u64 data);
-int btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins);
-int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins);
+int btrfs_alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 root_objectid, u64 owner,
+				     u64 offset, struct btrfs_key *ins);
+int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   u64 root_objectid, u64 owner, u64 offset,
+				   struct btrfs_key *ins);
 int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 				  struct btrfs_root *root,
 				  u64 num_bytes, u64 min_alloc_size,
@@ -1830,18 +1942,18 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 				  u64 search_end, struct btrfs_key *ins,
 				  u64 data);
 int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
-		  struct extent_buffer *orig_buf, struct extent_buffer *buf,
-		  u32 *nr_extents);
-int btrfs_cache_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
-		    struct extent_buffer *buf, u32 nr_extents);
-int btrfs_update_ref(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root, struct extent_buffer *orig_buf,
-		     struct extent_buffer *buf, int start_slot, int nr);
+		  struct extent_buffer *buf, int full_backref);
+int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+		  struct extent_buffer *buf, int full_backref);
+int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 flags,
+				int is_data);
 int btrfs_free_extent(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      u64 bytenr, u64 num_bytes, u64 parent,
-		      u64 root_objectid, u64 ref_generation,
-		      u64 owner_objectid, int pin);
+		      u64 root_objectid, u64 owner, u64 offset);
+
 int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len);
 int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 			       struct btrfs_root *root,
@@ -1849,13 +1961,8 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
 			 struct btrfs_root *root,
 			 u64 bytenr, u64 num_bytes, u64 parent,
-			 u64 root_objectid, u64 ref_generation,
-			 u64 owner_objectid);
-int btrfs_update_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr, u64 num_bytes,
-			    u64 orig_parent, u64 parent,
-			    u64 root_objectid, u64 ref_generation,
-			    u64 owner_objectid);
+			 u64 root_objectid, u64 owner, u64 offset);
+
 int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
 				    struct btrfs_root *root);
 int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr);
@@ -1867,16 +1974,9 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
 			   u64 size);
 int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root, u64 group_start);
-int btrfs_relocate_block_group(struct btrfs_root *root, u64 group_start);
-int btrfs_free_reloc_root(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root);
-int btrfs_drop_dead_reloc_roots(struct btrfs_root *root);
-int btrfs_reloc_tree_cache_ref(struct btrfs_trans_handle *trans,
-			       struct btrfs_root *root,
-			       struct extent_buffer *buf, u64 orig_start);
-int btrfs_add_dead_reloc_root(struct btrfs_root *root);
-int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
-int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
+int btrfs_prepare_block_group_relocation(struct btrfs_root *root,
+				struct btrfs_block_group_cache *group);
+
 u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
 void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
 void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
@@ -1891,13 +1991,12 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
 void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
 			      u64 bytes);
 /* ctree.c */
+int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
+		     int level, int *slot);
+int btrfs_comp_cpu_keys(struct btrfs_key *k1, struct btrfs_key *k2);
 int btrfs_previous_item(struct btrfs_root *root,
 			struct btrfs_path *path, u64 min_objectid,
 			int type);
-int btrfs_merge_path(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root,
-		     struct btrfs_key *node_keys,
-		     u64 *nodes, int lowest_level);
 int btrfs_set_item_key_safe(struct btrfs_trans_handle *trans,
 			    struct btrfs_root *root, struct btrfs_path *path,
 			    struct btrfs_key *new_key);
@@ -1918,6 +2017,8 @@ int btrfs_copy_root(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      struct extent_buffer *buf,
 		      struct extent_buffer **cow_ret, u64 new_root_objectid);
+int btrfs_block_can_be_shared(struct btrfs_root *root,
+			      struct extent_buffer *buf);
 int btrfs_extend_item(struct btrfs_trans_handle *trans, struct btrfs_root
 		      *root, struct btrfs_path *path, u32 data_size);
 int btrfs_truncate_item(struct btrfs_trans_handle *trans,
@@ -1944,9 +2045,6 @@ void btrfs_unlock_up_safe(struct btrfs_path *p, int level);
 
 int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		   struct btrfs_path *path, int slot, int nr);
-int btrfs_del_leaf(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root,
-			    struct btrfs_path *path, u64 bytenr);
 static inline int btrfs_del_item(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct btrfs_path *path)
@@ -2005,8 +2103,9 @@ int btrfs_find_last_root(struct btrfs_root *root, u64 objectid, struct
 			 btrfs_root_item *item, struct btrfs_key *key);
 int btrfs_search_root(struct btrfs_root *root, u64 search_start,
 		      u64 *found_objectid);
-int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid,
-			  struct btrfs_root *latest_root);
+int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid);
+int btrfs_set_root_node(struct btrfs_root_item *item,
+			struct extent_buffer *node);
 /* dir-item.c */
 int btrfs_insert_dir_item(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root, const char *name,
@@ -2139,7 +2238,6 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
 int btrfs_readpage(struct file *file, struct page *page);
 void btrfs_delete_inode(struct inode *inode);
 void btrfs_put_inode(struct inode *inode);
-void btrfs_read_locked_inode(struct inode *inode);
 int btrfs_write_inode(struct inode *inode, int wait);
 void btrfs_dirty_inode(struct inode *inode);
 struct inode *btrfs_alloc_inode(struct super_block *sb);
@@ -2147,12 +2245,8 @@ void btrfs_destroy_inode(struct inode *inode);
 int btrfs_init_cachep(void);
 void btrfs_destroy_cachep(void);
 long btrfs_ioctl_trans_end(struct file *file);
-struct inode *btrfs_ilookup(struct super_block *s, u64 objectid,
-			    struct btrfs_root *root, int wait);
-struct inode *btrfs_iget_locked(struct super_block *s, u64 objectid,
-				struct btrfs_root *root);
 struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
-			 struct btrfs_root *root, int *is_new);
+			 struct btrfs_root *root);
 int btrfs_commit_write(struct file *file, struct page *page,
 		       unsigned from, unsigned to);
 struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page,
@@ -2168,6 +2262,8 @@ int btrfs_cont_expand(struct inode *inode, loff_t size);
 
 /* ioctl.c */
 long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+void btrfs_update_iflags(struct inode *inode);
+void btrfs_inherit_iflags(struct inode *inode, struct inode *dir);
 
 /* file.c */
 int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync);
@@ -2205,8 +2301,20 @@ int btrfs_parse_options(struct btrfs_root *root, char *options);
 int btrfs_sync_fs(struct super_block *sb, int wait);
 
 /* acl.c */
+#ifdef CONFIG_FS_POSIX_ACL
 int btrfs_check_acl(struct inode *inode, int mask);
+#else
+#define btrfs_check_acl NULL
+#endif
 int btrfs_init_acl(struct inode *inode, struct inode *dir);
 int btrfs_acl_chmod(struct inode *inode);
 
+/* relocation.c */
+int btrfs_relocate_block_group(struct btrfs_root *root, u64 group_start);
+int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root);
+int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
+			    struct btrfs_root *root);
+int btrfs_recover_relocation(struct btrfs_root *root);
+int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
 #endif
diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c
index d6c01c096a4..84e6781413b 100644
--- a/fs/btrfs/delayed-ref.c
+++ b/fs/btrfs/delayed-ref.c
@@ -29,27 +29,87 @@
  * add extents in the middle of btrfs_search_slot, and it allows
  * us to buffer up frequently modified backrefs in an rb tree instead
  * of hammering updates on the extent allocation tree.
- *
- * Right now this code is only used for reference counted trees, but
- * the long term goal is to get rid of the similar code for delayed
- * extent tree modifications.
  */
 
 /*
- * entries in the rb tree are ordered by the byte number of the extent
- * and by the byte number of the parent block.
+ * compare two delayed tree backrefs with same bytenr and type
+ */
+static int comp_tree_refs(struct btrfs_delayed_tree_ref *ref2,
+			  struct btrfs_delayed_tree_ref *ref1)
+{
+	if (ref1->node.type == BTRFS_TREE_BLOCK_REF_KEY) {
+		if (ref1->root < ref2->root)
+			return -1;
+		if (ref1->root > ref2->root)
+			return 1;
+	} else {
+		if (ref1->parent < ref2->parent)
+			return -1;
+		if (ref1->parent > ref2->parent)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * compare two delayed data backrefs with same bytenr and type
  */
-static int comp_entry(struct btrfs_delayed_ref_node *ref,
-		      u64 bytenr, u64 parent)
+static int comp_data_refs(struct btrfs_delayed_data_ref *ref2,
+			  struct btrfs_delayed_data_ref *ref1)
 {
-	if (bytenr < ref->bytenr)
+	if (ref1->node.type == BTRFS_EXTENT_DATA_REF_KEY) {
+		if (ref1->root < ref2->root)
+			return -1;
+		if (ref1->root > ref2->root)
+			return 1;
+		if (ref1->objectid < ref2->objectid)
+			return -1;
+		if (ref1->objectid > ref2->objectid)
+			return 1;
+		if (ref1->offset < ref2->offset)
+			return -1;
+		if (ref1->offset > ref2->offset)
+			return 1;
+	} else {
+		if (ref1->parent < ref2->parent)
+			return -1;
+		if (ref1->parent > ref2->parent)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * entries in the rb tree are ordered by the byte number of the extent,
+ * type of the delayed backrefs and content of delayed backrefs.
+ */
+static int comp_entry(struct btrfs_delayed_ref_node *ref2,
+		      struct btrfs_delayed_ref_node *ref1)
+{
+	if (ref1->bytenr < ref2->bytenr)
 		return -1;
-	if (bytenr > ref->bytenr)
+	if (ref1->bytenr > ref2->bytenr)
 		return 1;
-	if (parent < ref->parent)
+	if (ref1->is_head && ref2->is_head)
+		return 0;
+	if (ref2->is_head)
 		return -1;
-	if (parent > ref->parent)
+	if (ref1->is_head)
 		return 1;
+	if (ref1->type < ref2->type)
+		return -1;
+	if (ref1->type > ref2->type)
+		return 1;
+	if (ref1->type == BTRFS_TREE_BLOCK_REF_KEY ||
+	    ref1->type == BTRFS_SHARED_BLOCK_REF_KEY) {
+		return comp_tree_refs(btrfs_delayed_node_to_tree_ref(ref2),
+				      btrfs_delayed_node_to_tree_ref(ref1));
+	} else if (ref1->type == BTRFS_EXTENT_DATA_REF_KEY ||
+		   ref1->type == BTRFS_SHARED_DATA_REF_KEY) {
+		return comp_data_refs(btrfs_delayed_node_to_data_ref(ref2),
+				      btrfs_delayed_node_to_data_ref(ref1));
+	}
+	BUG();
 	return 0;
 }
 
@@ -59,20 +119,21 @@ static int comp_entry(struct btrfs_delayed_ref_node *ref,
  * inserted.
  */
 static struct btrfs_delayed_ref_node *tree_insert(struct rb_root *root,
-						  u64 bytenr, u64 parent,
 						  struct rb_node *node)
 {
 	struct rb_node **p = &root->rb_node;
 	struct rb_node *parent_node = NULL;
 	struct btrfs_delayed_ref_node *entry;
+	struct btrfs_delayed_ref_node *ins;
 	int cmp;
 
+	ins = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
 	while (*p) {
 		parent_node = *p;
 		entry = rb_entry(parent_node, struct btrfs_delayed_ref_node,
 				 rb_node);
 
-		cmp = comp_entry(entry, bytenr, parent);
+		cmp = comp_entry(entry, ins);
 		if (cmp < 0)
 			p = &(*p)->rb_left;
 		else if (cmp > 0)
@@ -81,18 +142,17 @@ static struct btrfs_delayed_ref_node *tree_insert(struct rb_root *root,
 			return entry;
 	}
 
-	entry = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
 	rb_link_node(node, parent_node, p);
 	rb_insert_color(node, root);
 	return NULL;
 }
 
 /*
- * find an entry based on (bytenr,parent).  This returns the delayed
- * ref if it was able to find one, or NULL if nothing was in that spot
+ * find an head entry based on bytenr. This returns the delayed ref
+ * head if it was able to find one, or NULL if nothing was in that spot
  */
-static struct btrfs_delayed_ref_node *tree_search(struct rb_root *root,
-				  u64 bytenr, u64 parent,
+static struct btrfs_delayed_ref_node *find_ref_head(struct rb_root *root,
+				  u64 bytenr,
 				  struct btrfs_delayed_ref_node **last)
 {
 	struct rb_node *n = root->rb_node;
@@ -105,7 +165,15 @@ static struct btrfs_delayed_ref_node *tree_search(struct rb_root *root,
 		if (last)
 			*last = entry;
 
-		cmp = comp_entry(entry, bytenr, parent);
+		if (bytenr < entry->bytenr)
+			cmp = -1;
+		else if (bytenr > entry->bytenr)
+			cmp = 1;
+		else if (!btrfs_delayed_ref_is_head(entry))
+			cmp = 1;
+		else
+			cmp = 0;
+
 		if (cmp < 0)
 			n = n->rb_left;
 		else if (cmp > 0)
@@ -154,7 +222,7 @@ int btrfs_find_ref_cluster(struct btrfs_trans_handle *trans,
 		node = rb_first(&delayed_refs->root);
 	} else {
 		ref = NULL;
-		tree_search(&delayed_refs->root, start, (u64)-1, &ref);
+		find_ref_head(&delayed_refs->root, start, &ref);
 		if (ref) {
 			struct btrfs_delayed_ref_node *tmp;
 
@@ -234,7 +302,7 @@ int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr)
 	delayed_refs = &trans->transaction->delayed_refs;
 	spin_lock(&delayed_refs->lock);
 
-	ref = tree_search(&delayed_refs->root, bytenr, (u64)-1, NULL);
+	ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
 	if (ref) {
 		prev_node = rb_prev(&ref->rb_node);
 		if (!prev_node)
@@ -250,25 +318,28 @@ out:
 }
 
 /*
- * helper function to lookup reference count
+ * helper function to lookup reference count and flags of extent.
  *
  * the head node for delayed ref is used to store the sum of all the
- * reference count modifications queued up in the rbtree.  This way you
- * can check to see what the reference count would be if all of the
- * delayed refs are processed.
+ * reference count modifications queued up in the rbtree. the head
+ * node may also store the extent flags to set. This way you can check
+ * to see what the reference count and extent flags would be if all of
+ * the delayed refs are not processed.
  */
-int btrfs_lookup_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr,
-			    u64 num_bytes, u32 *refs)
+int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root, u64 bytenr,
+			     u64 num_bytes, u64 *refs, u64 *flags)
 {
 	struct btrfs_delayed_ref_node *ref;
 	struct btrfs_delayed_ref_head *head;
 	struct btrfs_delayed_ref_root *delayed_refs;
 	struct btrfs_path *path;
-	struct extent_buffer *leaf;
 	struct btrfs_extent_item *ei;
+	struct extent_buffer *leaf;
 	struct btrfs_key key;
-	u32 num_refs;
+	u32 item_size;
+	u64 num_refs;
+	u64 extent_flags;
 	int ret;
 
 	path = btrfs_alloc_path();
@@ -287,37 +358,60 @@ again:
 
 	if (ret == 0) {
 		leaf = path->nodes[0];
-		ei = btrfs_item_ptr(leaf, path->slots[0],
-				    struct btrfs_extent_item);
-		num_refs = btrfs_extent_refs(leaf, ei);
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+		if (item_size >= sizeof(*ei)) {
+			ei = btrfs_item_ptr(leaf, path->slots[0],
+					    struct btrfs_extent_item);
+			num_refs = btrfs_extent_refs(leaf, ei);
+			extent_flags = btrfs_extent_flags(leaf, ei);
+		} else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+			struct btrfs_extent_item_v0 *ei0;
+			BUG_ON(item_size != sizeof(*ei0));
+			ei0 = btrfs_item_ptr(leaf, path->slots[0],
+					     struct btrfs_extent_item_v0);
+			num_refs = btrfs_extent_refs_v0(leaf, ei0);
+			/* FIXME: this isn't correct for data */
+			extent_flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+#else
+			BUG();
+#endif
+		}
+		BUG_ON(num_refs == 0);
 	} else {
 		num_refs = 0;
+		extent_flags = 0;
 		ret = 0;
 	}
 
 	spin_lock(&delayed_refs->lock);
-	ref = tree_search(&delayed_refs->root, bytenr, (u64)-1, NULL);
+	ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
 	if (ref) {
 		head = btrfs_delayed_node_to_head(ref);
-		if (mutex_trylock(&head->mutex)) {
-			num_refs += ref->ref_mod;
-			mutex_unlock(&head->mutex);
-			*refs = num_refs;
-			goto out;
-		}
+		if (!mutex_trylock(&head->mutex)) {
+			atomic_inc(&ref->refs);
+			spin_unlock(&delayed_refs->lock);
 
-		atomic_inc(&ref->refs);
-		spin_unlock(&delayed_refs->lock);
+			btrfs_release_path(root->fs_info->extent_root, path);
 
-		btrfs_release_path(root->fs_info->extent_root, path);
+			mutex_lock(&head->mutex);
+			mutex_unlock(&head->mutex);
+			btrfs_put_delayed_ref(ref);
+			goto again;
+		}
+		if (head->extent_op && head->extent_op->update_flags)
+			extent_flags |= head->extent_op->flags_to_set;
+		else
+			BUG_ON(num_refs == 0);
 
-		mutex_lock(&head->mutex);
+		num_refs += ref->ref_mod;
 		mutex_unlock(&head->mutex);
-		btrfs_put_delayed_ref(ref);
-		goto again;
-	} else {
-		*refs = num_refs;
 	}
+	WARN_ON(num_refs == 0);
+	if (refs)
+		*refs = num_refs;
+	if (flags)
+		*flags = extent_flags;
 out:
 	spin_unlock(&delayed_refs->lock);
 	btrfs_free_path(path);
@@ -338,16 +432,7 @@ update_existing_ref(struct btrfs_trans_handle *trans,
 		    struct btrfs_delayed_ref_node *existing,
 		    struct btrfs_delayed_ref_node *update)
 {
-	struct btrfs_delayed_ref *existing_ref;
-	struct btrfs_delayed_ref *ref;
-
-	existing_ref = btrfs_delayed_node_to_ref(existing);
-	ref = btrfs_delayed_node_to_ref(update);
-
-	if (ref->pin)
-		existing_ref->pin = 1;
-
-	if (ref->action != existing_ref->action) {
+	if (update->action != existing->action) {
 		/*
 		 * this is effectively undoing either an add or a
 		 * drop.  We decrement the ref_mod, and if it goes
@@ -363,20 +448,13 @@ update_existing_ref(struct btrfs_trans_handle *trans,
 			delayed_refs->num_entries--;
 			if (trans->delayed_ref_updates)
 				trans->delayed_ref_updates--;
+		} else {
+			WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY ||
+				existing->type == BTRFS_SHARED_BLOCK_REF_KEY);
 		}
 	} else {
-		if (existing_ref->action == BTRFS_ADD_DELAYED_REF) {
-			/* if we're adding refs, make sure all the
-			 * details match up.  The extent could
-			 * have been totally freed and reallocated
-			 * by a different owner before the delayed
-			 * ref entries were removed.
-			 */
-			existing_ref->owner_objectid = ref->owner_objectid;
-			existing_ref->generation = ref->generation;
-			existing_ref->root = ref->root;
-			existing->num_bytes = update->num_bytes;
-		}
+		WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY ||
+			existing->type == BTRFS_SHARED_BLOCK_REF_KEY);
 		/*
 		 * the action on the existing ref matches
 		 * the action on the ref we're trying to add.
@@ -401,6 +479,7 @@ update_existing_head_ref(struct btrfs_delayed_ref_node *existing,
 
 	existing_ref = btrfs_delayed_node_to_head(existing);
 	ref = btrfs_delayed_node_to_head(update);
+	BUG_ON(existing_ref->is_data != ref->is_data);
 
 	if (ref->must_insert_reserved) {
 		/* if the extent was freed and then
@@ -420,6 +499,24 @@ update_existing_head_ref(struct btrfs_delayed_ref_node *existing,
 
 	}
 
+	if (ref->extent_op) {
+		if (!existing_ref->extent_op) {
+			existing_ref->extent_op = ref->extent_op;
+		} else {
+			if (ref->extent_op->update_key) {
+				memcpy(&existing_ref->extent_op->key,
+				       &ref->extent_op->key,
+				       sizeof(ref->extent_op->key));
+				existing_ref->extent_op->update_key = 1;
+			}
+			if (ref->extent_op->update_flags) {
+				existing_ref->extent_op->flags_to_set |=
+					ref->extent_op->flags_to_set;
+				existing_ref->extent_op->update_flags = 1;
+			}
+			kfree(ref->extent_op);
+		}
+	}
 	/*
 	 * update the reference mod on the head to reflect this new operation
 	 */
@@ -427,19 +524,16 @@ update_existing_head_ref(struct btrfs_delayed_ref_node *existing,
 }
 
 /*
- * helper function to actually insert a delayed ref into the rbtree.
+ * helper function to actually insert a head node into the rbtree.
  * this does all the dirty work in terms of maintaining the correct
- * overall modification count in the head node and properly dealing
- * with updating existing nodes as new modifications are queued.
+ * overall modification count.
  */
-static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
-			  struct btrfs_delayed_ref_node *ref,
-			  u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid, int action,
-			  int pin)
+static noinline int add_delayed_ref_head(struct btrfs_trans_handle *trans,
+					struct btrfs_delayed_ref_node *ref,
+					u64 bytenr, u64 num_bytes,
+					int action, int is_data)
 {
 	struct btrfs_delayed_ref_node *existing;
-	struct btrfs_delayed_ref *full_ref;
 	struct btrfs_delayed_ref_head *head_ref = NULL;
 	struct btrfs_delayed_ref_root *delayed_refs;
 	int count_mod = 1;
@@ -449,12 +543,10 @@ static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 	 * the head node stores the sum of all the mods, so dropping a ref
 	 * should drop the sum in the head node by one.
 	 */
-	if (parent == (u64)-1) {
-		if (action == BTRFS_DROP_DELAYED_REF)
-			count_mod = -1;
-		else if (action == BTRFS_UPDATE_DELAYED_HEAD)
-			count_mod = 0;
-	}
+	if (action == BTRFS_UPDATE_DELAYED_HEAD)
+		count_mod = 0;
+	else if (action == BTRFS_DROP_DELAYED_REF)
+		count_mod = -1;
 
 	/*
 	 * BTRFS_ADD_DELAYED_EXTENT means that we need to update
@@ -467,57 +559,148 @@ static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 	 * Once we record must_insert_reserved, switch the action to
 	 * BTRFS_ADD_DELAYED_REF because other special casing is not required.
 	 */
-	if (action == BTRFS_ADD_DELAYED_EXTENT) {
+	if (action == BTRFS_ADD_DELAYED_EXTENT)
 		must_insert_reserved = 1;
-		action = BTRFS_ADD_DELAYED_REF;
-	} else {
+	else
 		must_insert_reserved = 0;
-	}
-
 
 	delayed_refs = &trans->transaction->delayed_refs;
 
 	/* first set the basic ref node struct up */
 	atomic_set(&ref->refs, 1);
 	ref->bytenr = bytenr;
-	ref->parent = parent;
+	ref->num_bytes = num_bytes;
 	ref->ref_mod = count_mod;
+	ref->type  = 0;
+	ref->action  = 0;
+	ref->is_head = 1;
 	ref->in_tree = 1;
+
+	head_ref = btrfs_delayed_node_to_head(ref);
+	head_ref->must_insert_reserved = must_insert_reserved;
+	head_ref->is_data = is_data;
+
+	INIT_LIST_HEAD(&head_ref->cluster);
+	mutex_init(&head_ref->mutex);
+
+	existing = tree_insert(&delayed_refs->root, &ref->rb_node);
+
+	if (existing) {
+		update_existing_head_ref(existing, ref);
+		/*
+		 * we've updated the existing ref, free the newly
+		 * allocated ref
+		 */
+		kfree(ref);
+	} else {
+		delayed_refs->num_heads++;
+		delayed_refs->num_heads_ready++;
+		delayed_refs->num_entries++;
+		trans->delayed_ref_updates++;
+	}
+	return 0;
+}
+
+/*
+ * helper to insert a delayed tree ref into the rbtree.
+ */
+static noinline int add_delayed_tree_ref(struct btrfs_trans_handle *trans,
+					 struct btrfs_delayed_ref_node *ref,
+					 u64 bytenr, u64 num_bytes, u64 parent,
+					 u64 ref_root, int level, int action)
+{
+	struct btrfs_delayed_ref_node *existing;
+	struct btrfs_delayed_tree_ref *full_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+
+	if (action == BTRFS_ADD_DELAYED_EXTENT)
+		action = BTRFS_ADD_DELAYED_REF;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+
+	/* first set the basic ref node struct up */
+	atomic_set(&ref->refs, 1);
+	ref->bytenr = bytenr;
 	ref->num_bytes = num_bytes;
+	ref->ref_mod = 1;
+	ref->action = action;
+	ref->is_head = 0;
+	ref->in_tree = 1;
 
-	if (btrfs_delayed_ref_is_head(ref)) {
-		head_ref = btrfs_delayed_node_to_head(ref);
-		head_ref->must_insert_reserved = must_insert_reserved;
-		INIT_LIST_HEAD(&head_ref->cluster);
-		mutex_init(&head_ref->mutex);
+	full_ref = btrfs_delayed_node_to_tree_ref(ref);
+	if (parent) {
+		full_ref->parent = parent;
+		ref->type = BTRFS_SHARED_BLOCK_REF_KEY;
 	} else {
-		full_ref = btrfs_delayed_node_to_ref(ref);
 		full_ref->root = ref_root;
-		full_ref->generation = ref_generation;
-		full_ref->owner_objectid = owner_objectid;
-		full_ref->pin = pin;
-		full_ref->action = action;
+		ref->type = BTRFS_TREE_BLOCK_REF_KEY;
 	}
+	full_ref->level = level;
 
-	existing = tree_insert(&delayed_refs->root, bytenr,
-			       parent, &ref->rb_node);
+	existing = tree_insert(&delayed_refs->root, &ref->rb_node);
 
 	if (existing) {
-		if (btrfs_delayed_ref_is_head(ref))
-			update_existing_head_ref(existing, ref);
-		else
-			update_existing_ref(trans, delayed_refs, existing, ref);
+		update_existing_ref(trans, delayed_refs, existing, ref);
+		/*
+		 * we've updated the existing ref, free the newly
+		 * allocated ref
+		 */
+		kfree(ref);
+	} else {
+		delayed_refs->num_entries++;
+		trans->delayed_ref_updates++;
+	}
+	return 0;
+}
+
+/*
+ * helper to insert a delayed data ref into the rbtree.
+ */
+static noinline int add_delayed_data_ref(struct btrfs_trans_handle *trans,
+					 struct btrfs_delayed_ref_node *ref,
+					 u64 bytenr, u64 num_bytes, u64 parent,
+					 u64 ref_root, u64 owner, u64 offset,
+					 int action)
+{
+	struct btrfs_delayed_ref_node *existing;
+	struct btrfs_delayed_data_ref *full_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+
+	if (action == BTRFS_ADD_DELAYED_EXTENT)
+		action = BTRFS_ADD_DELAYED_REF;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+
+	/* first set the basic ref node struct up */
+	atomic_set(&ref->refs, 1);
+	ref->bytenr = bytenr;
+	ref->num_bytes = num_bytes;
+	ref->ref_mod = 1;
+	ref->action = action;
+	ref->is_head = 0;
+	ref->in_tree = 1;
+
+	full_ref = btrfs_delayed_node_to_data_ref(ref);
+	if (parent) {
+		full_ref->parent = parent;
+		ref->type = BTRFS_SHARED_DATA_REF_KEY;
+	} else {
+		full_ref->root = ref_root;
+		ref->type = BTRFS_EXTENT_DATA_REF_KEY;
+	}
+	full_ref->objectid = owner;
+	full_ref->offset = offset;
 
+	existing = tree_insert(&delayed_refs->root, &ref->rb_node);
+
+	if (existing) {
+		update_existing_ref(trans, delayed_refs, existing, ref);
 		/*
 		 * we've updated the existing ref, free the newly
 		 * allocated ref
 		 */
 		kfree(ref);
 	} else {
-		if (btrfs_delayed_ref_is_head(ref)) {
-			delayed_refs->num_heads++;
-			delayed_refs->num_heads_ready++;
-		}
 		delayed_refs->num_entries++;
 		trans->delayed_ref_updates++;
 	}
@@ -525,37 +708,78 @@ static noinline int __btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 }
 
 /*
- * add a delayed ref to the tree.  This does all of the accounting required
+ * add a delayed tree ref.  This does all of the accounting required
  * to make sure the delayed ref is eventually processed before this
  * transaction commits.
  */
-int btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
-			  u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid, int action,
-			  int pin)
+int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes, u64 parent,
+			       u64 ref_root,  int level, int action,
+			       struct btrfs_delayed_extent_op *extent_op)
 {
-	struct btrfs_delayed_ref *ref;
+	struct btrfs_delayed_tree_ref *ref;
 	struct btrfs_delayed_ref_head *head_ref;
 	struct btrfs_delayed_ref_root *delayed_refs;
 	int ret;
 
+	BUG_ON(extent_op && extent_op->is_data);
 	ref = kmalloc(sizeof(*ref), GFP_NOFS);
 	if (!ref)
 		return -ENOMEM;
 
+	head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS);
+	if (!head_ref) {
+		kfree(ref);
+		return -ENOMEM;
+	}
+
+	head_ref->extent_op = extent_op;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+	spin_lock(&delayed_refs->lock);
+
 	/*
-	 * the parent = 0 case comes from cases where we don't actually
-	 * know the parent yet.  It will get updated later via a add/drop
-	 * pair.
+	 * insert both the head node and the new ref without dropping
+	 * the spin lock
 	 */
-	if (parent == 0)
-		parent = bytenr;
+	ret = add_delayed_ref_head(trans, &head_ref->node, bytenr, num_bytes,
+				   action, 0);
+	BUG_ON(ret);
+
+	ret = add_delayed_tree_ref(trans, &ref->node, bytenr, num_bytes,
+				   parent, ref_root, level, action);
+	BUG_ON(ret);
+	spin_unlock(&delayed_refs->lock);
+	return 0;
+}
+
+/*
+ * add a delayed data ref. it's similar to btrfs_add_delayed_tree_ref.
+ */
+int btrfs_add_delayed_data_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes,
+			       u64 parent, u64 ref_root,
+			       u64 owner, u64 offset, int action,
+			       struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_delayed_data_ref *ref;
+	struct btrfs_delayed_ref_head *head_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+	int ret;
+
+	BUG_ON(extent_op && !extent_op->is_data);
+	ref = kmalloc(sizeof(*ref), GFP_NOFS);
+	if (!ref)
+		return -ENOMEM;
 
 	head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS);
 	if (!head_ref) {
 		kfree(ref);
 		return -ENOMEM;
 	}
+
+	head_ref->extent_op = extent_op;
+
 	delayed_refs = &trans->transaction->delayed_refs;
 	spin_lock(&delayed_refs->lock);
 
@@ -563,14 +787,39 @@ int btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
 	 * insert both the head node and the new ref without dropping
 	 * the spin lock
 	 */
-	ret = __btrfs_add_delayed_ref(trans, &head_ref->node, bytenr, num_bytes,
-				      (u64)-1, 0, 0, 0, action, pin);
+	ret = add_delayed_ref_head(trans, &head_ref->node, bytenr, num_bytes,
+				   action, 1);
 	BUG_ON(ret);
 
-	ret = __btrfs_add_delayed_ref(trans, &ref->node, bytenr, num_bytes,
-				      parent, ref_root, ref_generation,
-				      owner_objectid, action, pin);
+	ret = add_delayed_data_ref(trans, &ref->node, bytenr, num_bytes,
+				   parent, ref_root, owner, offset, action);
+	BUG_ON(ret);
+	spin_unlock(&delayed_refs->lock);
+	return 0;
+}
+
+int btrfs_add_delayed_extent_op(struct btrfs_trans_handle *trans,
+				u64 bytenr, u64 num_bytes,
+				struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_delayed_ref_head *head_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+	int ret;
+
+	head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS);
+	if (!head_ref)
+		return -ENOMEM;
+
+	head_ref->extent_op = extent_op;
+
+	delayed_refs = &trans->transaction->delayed_refs;
+	spin_lock(&delayed_refs->lock);
+
+	ret = add_delayed_ref_head(trans, &head_ref->node, bytenr,
+				   num_bytes, BTRFS_UPDATE_DELAYED_HEAD,
+				   extent_op->is_data);
 	BUG_ON(ret);
+
 	spin_unlock(&delayed_refs->lock);
 	return 0;
 }
@@ -587,7 +836,7 @@ btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr)
 	struct btrfs_delayed_ref_root *delayed_refs;
 
 	delayed_refs = &trans->transaction->delayed_refs;
-	ref = tree_search(&delayed_refs->root, bytenr, (u64)-1, NULL);
+	ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
 	if (ref)
 		return btrfs_delayed_node_to_head(ref);
 	return NULL;
@@ -603,6 +852,7 @@ btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr)
  *
  * It is the same as doing a ref add and delete in two separate calls.
  */
+#if 0
 int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
 			  u64 bytenr, u64 num_bytes, u64 orig_parent,
 			  u64 parent, u64 orig_ref_root, u64 ref_root,
@@ -666,3 +916,4 @@ int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
 	spin_unlock(&delayed_refs->lock);
 	return 0;
 }
+#endif
diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h
index 3bec2ff0b15..f6fc67ddad3 100644
--- a/fs/btrfs/delayed-ref.h
+++ b/fs/btrfs/delayed-ref.h
@@ -30,9 +30,6 @@ struct btrfs_delayed_ref_node {
 	/* the starting bytenr of the extent */
 	u64 bytenr;
 
-	/* the parent our backref will point to */
-	u64 parent;
-
 	/* the size of the extent */
 	u64 num_bytes;
 
@@ -50,10 +47,21 @@ struct btrfs_delayed_ref_node {
 	 */
 	int ref_mod;
 
+	unsigned int action:8;
+	unsigned int type:8;
 	/* is this node still in the rbtree? */
+	unsigned int is_head:1;
 	unsigned int in_tree:1;
 };
 
+struct btrfs_delayed_extent_op {
+	struct btrfs_disk_key key;
+	u64 flags_to_set;
+	unsigned int update_key:1;
+	unsigned int update_flags:1;
+	unsigned int is_data:1;
+};
+
 /*
  * the head refs are used to hold a lock on a given extent, which allows us
  * to make sure that only one process is running the delayed refs
@@ -71,6 +79,7 @@ struct btrfs_delayed_ref_head {
 
 	struct list_head cluster;
 
+	struct btrfs_delayed_extent_op *extent_op;
 	/*
 	 * when a new extent is allocated, it is just reserved in memory
 	 * The actual extent isn't inserted into the extent allocation tree
@@ -84,27 +93,26 @@ struct btrfs_delayed_ref_head {
 	 * the free has happened.
 	 */
 	unsigned int must_insert_reserved:1;
+	unsigned int is_data:1;
 };
 
-struct btrfs_delayed_ref {
+struct btrfs_delayed_tree_ref {
 	struct btrfs_delayed_ref_node node;
+	union {
+		u64 root;
+		u64 parent;
+	};
+	int level;
+};
 
-	/* the root objectid our ref will point to */
-	u64 root;
-
-	/* the generation for the backref */
-	u64 generation;
-
-	/* owner_objectid of the backref  */
-	u64 owner_objectid;
-
-	/* operation done by this entry in the rbtree */
-	u8 action;
-
-	/* if pin == 1, when the extent is freed it will be pinned until
-	 * transaction commit
-	 */
-	unsigned int pin:1;
+struct btrfs_delayed_data_ref {
+	struct btrfs_delayed_ref_node node;
+	union {
+		u64 root;
+		u64 parent;
+	};
+	u64 objectid;
+	u64 offset;
 };
 
 struct btrfs_delayed_ref_root {
@@ -143,17 +151,25 @@ static inline void btrfs_put_delayed_ref(struct btrfs_delayed_ref_node *ref)
 	}
 }
 
-int btrfs_add_delayed_ref(struct btrfs_trans_handle *trans,
-			  u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid, int action,
-			  int pin);
+int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes, u64 parent,
+			       u64 ref_root, int level, int action,
+			       struct btrfs_delayed_extent_op *extent_op);
+int btrfs_add_delayed_data_ref(struct btrfs_trans_handle *trans,
+			       u64 bytenr, u64 num_bytes,
+			       u64 parent, u64 ref_root,
+			       u64 owner, u64 offset, int action,
+			       struct btrfs_delayed_extent_op *extent_op);
+int btrfs_add_delayed_extent_op(struct btrfs_trans_handle *trans,
+				u64 bytenr, u64 num_bytes,
+				struct btrfs_delayed_extent_op *extent_op);
 
 struct btrfs_delayed_ref_head *
 btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr);
 int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr);
-int btrfs_lookup_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr,
-			    u64 num_bytes, u32 *refs);
+int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root, u64 bytenr,
+			     u64 num_bytes, u64 *refs, u64 *flags);
 int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
 			  u64 bytenr, u64 num_bytes, u64 orig_parent,
 			  u64 parent, u64 orig_ref_root, u64 ref_root,
@@ -169,18 +185,24 @@ int btrfs_find_ref_cluster(struct btrfs_trans_handle *trans,
  */
 static int btrfs_delayed_ref_is_head(struct btrfs_delayed_ref_node *node)
 {
-	return node->parent == (u64)-1;
+	return node->is_head;
 }
 
 /*
  * helper functions to cast a node into its container
  */
-static inline struct btrfs_delayed_ref *
-btrfs_delayed_node_to_ref(struct btrfs_delayed_ref_node *node)
+static inline struct btrfs_delayed_tree_ref *
+btrfs_delayed_node_to_tree_ref(struct btrfs_delayed_ref_node *node)
 {
 	WARN_ON(btrfs_delayed_ref_is_head(node));
-	return container_of(node, struct btrfs_delayed_ref, node);
+	return container_of(node, struct btrfs_delayed_tree_ref, node);
+}
 
+static inline struct btrfs_delayed_data_ref *
+btrfs_delayed_node_to_data_ref(struct btrfs_delayed_ref_node *node)
+{
+	WARN_ON(btrfs_delayed_ref_is_head(node));
+	return container_of(node, struct btrfs_delayed_data_ref, node);
 }
 
 static inline struct btrfs_delayed_ref_head *
@@ -188,6 +210,5 @@ btrfs_delayed_node_to_head(struct btrfs_delayed_ref_node *node)
 {
 	WARN_ON(!btrfs_delayed_ref_is_head(node));
 	return container_of(node, struct btrfs_delayed_ref_head, node);
-
 }
 #endif
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 0ff16d3331d..0d50d49d990 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -26,8 +26,8 @@
 #include <linux/workqueue.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/crc32c.h>
 #include "compat.h"
-#include "crc32c.h"
 #include "ctree.h"
 #include "disk-io.h"
 #include "transaction.h"
@@ -36,7 +36,6 @@
 #include "print-tree.h"
 #include "async-thread.h"
 #include "locking.h"
-#include "ref-cache.h"
 #include "tree-log.h"
 #include "free-space-cache.h"
 
@@ -172,7 +171,7 @@ out:
 
 u32 btrfs_csum_data(struct btrfs_root *root, char *data, u32 seed, size_t len)
 {
-	return btrfs_crc32c(seed, data, len);
+	return crc32c(seed, data, len);
 }
 
 void btrfs_csum_final(u32 crc, char *result)
@@ -848,8 +847,6 @@ struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
 
 	if (ret == 0)
 		set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
-	else
-		WARN_ON(1);
 	return buf;
 
 }
@@ -886,7 +883,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 {
 	root->node = NULL;
 	root->commit_root = NULL;
-	root->ref_tree = NULL;
 	root->sectorsize = sectorsize;
 	root->nodesize = nodesize;
 	root->leafsize = leafsize;
@@ -901,12 +897,14 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 	root->last_inode_alloc = 0;
 	root->name = NULL;
 	root->in_sysfs = 0;
+	root->inode_tree.rb_node = NULL;
 
 	INIT_LIST_HEAD(&root->dirty_list);
 	INIT_LIST_HEAD(&root->orphan_list);
-	INIT_LIST_HEAD(&root->dead_list);
+	INIT_LIST_HEAD(&root->root_list);
 	spin_lock_init(&root->node_lock);
 	spin_lock_init(&root->list_lock);
+	spin_lock_init(&root->inode_lock);
 	mutex_init(&root->objectid_mutex);
 	mutex_init(&root->log_mutex);
 	init_waitqueue_head(&root->log_writer_wait);
@@ -920,9 +918,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize,
 	extent_io_tree_init(&root->dirty_log_pages,
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
 
-	btrfs_leaf_ref_tree_init(&root->ref_tree_struct);
-	root->ref_tree = &root->ref_tree_struct;
-
 	memset(&root->root_key, 0, sizeof(root->root_key));
 	memset(&root->root_item, 0, sizeof(root->root_item));
 	memset(&root->defrag_progress, 0, sizeof(root->defrag_progress));
@@ -961,6 +956,7 @@ static int find_and_setup_root(struct btrfs_root *tree_root,
 	blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
 	root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
 				     blocksize, generation);
+	root->commit_root = btrfs_root_node(root);
 	BUG_ON(!root->node);
 	return 0;
 }
@@ -1027,20 +1023,19 @@ static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
 	 */
 	root->ref_cows = 0;
 
-	leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
-				      0, BTRFS_TREE_LOG_OBJECTID,
-				      trans->transid, 0, 0, 0);
+	leaf = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
+				      BTRFS_TREE_LOG_OBJECTID, NULL, 0, 0, 0);
 	if (IS_ERR(leaf)) {
 		kfree(root);
 		return ERR_CAST(leaf);
 	}
 
+	memset_extent_buffer(leaf, 0, 0, sizeof(struct btrfs_header));
+	btrfs_set_header_bytenr(leaf, leaf->start);
+	btrfs_set_header_generation(leaf, trans->transid);
+	btrfs_set_header_backref_rev(leaf, BTRFS_MIXED_BACKREF_REV);
+	btrfs_set_header_owner(leaf, BTRFS_TREE_LOG_OBJECTID);
 	root->node = leaf;
-	btrfs_set_header_nritems(root->node, 0);
-	btrfs_set_header_level(root->node, 0);
-	btrfs_set_header_bytenr(root->node, root->node->start);
-	btrfs_set_header_generation(root->node, trans->transid);
-	btrfs_set_header_owner(root->node, BTRFS_TREE_LOG_OBJECTID);
 
 	write_extent_buffer(root->node, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(root->node),
@@ -1083,8 +1078,7 @@ int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
 	inode_item->nbytes = cpu_to_le64(root->leafsize);
 	inode_item->mode = cpu_to_le32(S_IFDIR | 0755);
 
-	btrfs_set_root_bytenr(&log_root->root_item, log_root->node->start);
-	btrfs_set_root_generation(&log_root->root_item, trans->transid);
+	btrfs_set_root_node(&log_root->root_item, log_root->node);
 
 	WARN_ON(root->log_root);
 	root->log_root = log_root;
@@ -1146,6 +1140,7 @@ out:
 	blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
 	root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
 				     blocksize, generation);
+	root->commit_root = btrfs_root_node(root);
 	BUG_ON(!root->node);
 insert:
 	if (location->objectid != BTRFS_TREE_LOG_OBJECTID) {
@@ -1212,7 +1207,7 @@ struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info,
 	}
 	if (!(fs_info->sb->s_flags & MS_RDONLY)) {
 		ret = btrfs_find_dead_roots(fs_info->tree_root,
-					    root->root_key.objectid, root);
+					    root->root_key.objectid);
 		BUG_ON(ret);
 		btrfs_orphan_cleanup(root);
 	}
@@ -1571,8 +1566,6 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	atomic_set(&fs_info->async_delalloc_pages, 0);
 	atomic_set(&fs_info->async_submit_draining, 0);
 	atomic_set(&fs_info->nr_async_bios, 0);
-	atomic_set(&fs_info->throttles, 0);
-	atomic_set(&fs_info->throttle_gen, 0);
 	fs_info->sb = sb;
 	fs_info->max_extent = (u64)-1;
 	fs_info->max_inline = 8192 * 1024;
@@ -1600,6 +1593,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->btree_inode->i_mapping->a_ops = &btree_aops;
 	fs_info->btree_inode->i_mapping->backing_dev_info = &fs_info->bdi;
 
+	RB_CLEAR_NODE(&BTRFS_I(fs_info->btree_inode)->rb_node);
 	extent_io_tree_init(&BTRFS_I(fs_info->btree_inode)->io_tree,
 			     fs_info->btree_inode->i_mapping,
 			     GFP_NOFS);
@@ -1615,10 +1609,6 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
 	fs_info->do_barriers = 1;
 
-	INIT_LIST_HEAD(&fs_info->dead_reloc_roots);
-	btrfs_leaf_ref_tree_init(&fs_info->reloc_ref_tree);
-	btrfs_leaf_ref_tree_init(&fs_info->shared_ref_tree);
-
 	BTRFS_I(fs_info->btree_inode)->root = tree_root;
 	memset(&BTRFS_I(fs_info->btree_inode)->location, 0,
 	       sizeof(struct btrfs_key));
@@ -1676,6 +1666,12 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 		goto fail_iput;
 	}
 
+	features = btrfs_super_incompat_flags(disk_super);
+	if (!(features & BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF)) {
+		features |= BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF;
+		btrfs_set_super_incompat_flags(disk_super, features);
+	}
+
 	features = btrfs_super_compat_ro_flags(disk_super) &
 		~BTRFS_FEATURE_COMPAT_RO_SUPP;
 	if (!(sb->s_flags & MS_RDONLY) && features) {
@@ -1773,7 +1769,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	if (ret) {
 		printk(KERN_WARNING "btrfs: failed to read the system "
 		       "array on %s\n", sb->s_id);
-		goto fail_sys_array;
+		goto fail_sb_buffer;
 	}
 
 	blocksize = btrfs_level_size(tree_root,
@@ -1787,6 +1783,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					   btrfs_super_chunk_root(disk_super),
 					   blocksize, generation);
 	BUG_ON(!chunk_root->node);
+	btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
+	chunk_root->commit_root = btrfs_root_node(chunk_root);
 
 	read_extent_buffer(chunk_root->node, fs_info->chunk_tree_uuid,
 	   (unsigned long)btrfs_header_chunk_tree_uuid(chunk_root->node),
@@ -1812,7 +1810,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					  blocksize, generation);
 	if (!tree_root->node)
 		goto fail_chunk_root;
-
+	btrfs_set_root_node(&tree_root->root_item, tree_root->node);
+	tree_root->commit_root = btrfs_root_node(tree_root);
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_EXTENT_TREE_OBJECTID, extent_root);
@@ -1822,14 +1821,14 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_DEV_TREE_OBJECTID, dev_root);
-	dev_root->track_dirty = 1;
 	if (ret)
 		goto fail_extent_root;
+	dev_root->track_dirty = 1;
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_CSUM_TREE_OBJECTID, csum_root);
 	if (ret)
-		goto fail_extent_root;
+		goto fail_dev_root;
 
 	csum_root->track_dirty = 1;
 
@@ -1851,6 +1850,14 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	if (IS_ERR(fs_info->transaction_kthread))
 		goto fail_cleaner;
 
+	if (!btrfs_test_opt(tree_root, SSD) &&
+	    !btrfs_test_opt(tree_root, NOSSD) &&
+	    !fs_info->fs_devices->rotating) {
+		printk(KERN_INFO "Btrfs detected SSD devices, enabling SSD "
+		       "mode\n");
+		btrfs_set_opt(fs_info->mount_opt, SSD);
+	}
+
 	if (btrfs_super_log_root(disk_super) != 0) {
 		u64 bytenr = btrfs_super_log_root(disk_super);
 
@@ -1883,7 +1890,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	}
 
 	if (!(sb->s_flags & MS_RDONLY)) {
-		ret = btrfs_cleanup_reloc_trees(tree_root);
+		ret = btrfs_recover_relocation(tree_root);
 		BUG_ON(ret);
 	}
 
@@ -1894,6 +1901,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->fs_root = btrfs_read_fs_root_no_name(fs_info, &location);
 	if (!fs_info->fs_root)
 		goto fail_trans_kthread;
+
 	return tree_root;
 
 fail_trans_kthread:
@@ -1910,14 +1918,19 @@ fail_cleaner:
 
 fail_csum_root:
 	free_extent_buffer(csum_root->node);
+	free_extent_buffer(csum_root->commit_root);
+fail_dev_root:
+	free_extent_buffer(dev_root->node);
+	free_extent_buffer(dev_root->commit_root);
 fail_extent_root:
 	free_extent_buffer(extent_root->node);
+	free_extent_buffer(extent_root->commit_root);
 fail_tree_root:
 	free_extent_buffer(tree_root->node);
+	free_extent_buffer(tree_root->commit_root);
 fail_chunk_root:
 	free_extent_buffer(chunk_root->node);
-fail_sys_array:
-	free_extent_buffer(dev_root->node);
+	free_extent_buffer(chunk_root->commit_root);
 fail_sb_buffer:
 	btrfs_stop_workers(&fs_info->fixup_workers);
 	btrfs_stop_workers(&fs_info->delalloc_workers);
@@ -2007,6 +2020,17 @@ struct buffer_head *btrfs_read_dev_super(struct block_device *bdev)
 	return latest;
 }
 
+/*
+ * this should be called twice, once with wait == 0 and
+ * once with wait == 1.  When wait == 0 is done, all the buffer heads
+ * we write are pinned.
+ *
+ * They are released when wait == 1 is done.
+ * max_mirrors must be the same for both runs, and it indicates how
+ * many supers on this one device should be written.
+ *
+ * max_mirrors == 0 means to write them all.
+ */
 static int write_dev_supers(struct btrfs_device *device,
 			    struct btrfs_super_block *sb,
 			    int do_barriers, int wait, int max_mirrors)
@@ -2042,12 +2066,16 @@ static int write_dev_supers(struct btrfs_device *device,
 			bh = __find_get_block(device->bdev, bytenr / 4096,
 					      BTRFS_SUPER_INFO_SIZE);
 			BUG_ON(!bh);
-			brelse(bh);
 			wait_on_buffer(bh);
-			if (buffer_uptodate(bh)) {
-				brelse(bh);
-				continue;
-			}
+			if (!buffer_uptodate(bh))
+				errors++;
+
+			/* drop our reference */
+			brelse(bh);
+
+			/* drop the reference from the wait == 0 run */
+			brelse(bh);
+			continue;
 		} else {
 			btrfs_set_super_bytenr(sb, bytenr);
 
@@ -2058,12 +2086,18 @@ static int write_dev_supers(struct btrfs_device *device,
 					      BTRFS_CSUM_SIZE);
 			btrfs_csum_final(crc, sb->csum);
 
+			/*
+			 * one reference for us, and we leave it for the
+			 * caller
+			 */
 			bh = __getblk(device->bdev, bytenr / 4096,
 				      BTRFS_SUPER_INFO_SIZE);
 			memcpy(bh->b_data, sb, BTRFS_SUPER_INFO_SIZE);
 
-			set_buffer_uptodate(bh);
+			/* one reference for submit_bh */
 			get_bh(bh);
+
+			set_buffer_uptodate(bh);
 			lock_buffer(bh);
 			bh->b_end_io = btrfs_end_buffer_write_sync;
 		}
@@ -2075,6 +2109,7 @@ static int write_dev_supers(struct btrfs_device *device,
 				       device->name);
 				set_buffer_uptodate(bh);
 				device->barriers = 0;
+				/* one reference for submit_bh */
 				get_bh(bh);
 				lock_buffer(bh);
 				ret = submit_bh(WRITE_SYNC, bh);
@@ -2083,22 +2118,15 @@ static int write_dev_supers(struct btrfs_device *device,
 			ret = submit_bh(WRITE_SYNC, bh);
 		}
 
-		if (!ret && wait) {
-			wait_on_buffer(bh);
-			if (!buffer_uptodate(bh))
-				errors++;
-		} else if (ret) {
+		if (ret)
 			errors++;
-		}
-		if (wait)
-			brelse(bh);
 	}
 	return errors < i ? 0 : -1;
 }
 
 int write_all_supers(struct btrfs_root *root, int max_mirrors)
 {
-	struct list_head *head = &root->fs_info->fs_devices->devices;
+	struct list_head *head;
 	struct btrfs_device *dev;
 	struct btrfs_super_block *sb;
 	struct btrfs_dev_item *dev_item;
@@ -2113,6 +2141,9 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors)
 
 	sb = &root->fs_info->super_for_commit;
 	dev_item = &sb->dev_item;
+
+	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
+	head = &root->fs_info->fs_devices->devices;
 	list_for_each_entry(dev, head, dev_list) {
 		if (!dev->bdev) {
 			total_errors++;
@@ -2156,6 +2187,7 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors)
 		if (ret)
 			total_errors++;
 	}
+	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 	if (total_errors > max_errors) {
 		printk(KERN_ERR "btrfs: %d errors while writing supers\n",
 		       total_errors);
@@ -2175,6 +2207,7 @@ int write_ctree_super(struct btrfs_trans_handle *trans,
 
 int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root)
 {
+	WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
 	radix_tree_delete(&fs_info->fs_roots_radix,
 			  (unsigned long)root->root_key.objectid);
 	if (root->anon_super.s_dev) {
@@ -2221,10 +2254,12 @@ int btrfs_cleanup_fs_roots(struct btrfs_fs_info *fs_info)
 					     ARRAY_SIZE(gang));
 		if (!ret)
 			break;
+
+		root_objectid = gang[ret - 1]->root_key.objectid + 1;
 		for (i = 0; i < ret; i++) {
 			root_objectid = gang[i]->root_key.objectid;
 			ret = btrfs_find_dead_roots(fs_info->tree_root,
-						    root_objectid, gang[i]);
+						    root_objectid);
 			BUG_ON(ret);
 			btrfs_orphan_cleanup(gang[i]);
 		}
@@ -2280,20 +2315,16 @@ int close_ctree(struct btrfs_root *root)
 		       (unsigned long long)fs_info->total_ref_cache_size);
 	}
 
-	if (fs_info->extent_root->node)
-		free_extent_buffer(fs_info->extent_root->node);
-
-	if (fs_info->tree_root->node)
-		free_extent_buffer(fs_info->tree_root->node);
-
-	if (root->fs_info->chunk_root->node)
-		free_extent_buffer(root->fs_info->chunk_root->node);
-
-	if (root->fs_info->dev_root->node)
-		free_extent_buffer(root->fs_info->dev_root->node);
-
-	if (root->fs_info->csum_root->node)
-		free_extent_buffer(root->fs_info->csum_root->node);
+	free_extent_buffer(fs_info->extent_root->node);
+	free_extent_buffer(fs_info->extent_root->commit_root);
+	free_extent_buffer(fs_info->tree_root->node);
+	free_extent_buffer(fs_info->tree_root->commit_root);
+	free_extent_buffer(root->fs_info->chunk_root->node);
+	free_extent_buffer(root->fs_info->chunk_root->commit_root);
+	free_extent_buffer(root->fs_info->dev_root->node);
+	free_extent_buffer(root->fs_info->dev_root->commit_root);
+	free_extent_buffer(root->fs_info->csum_root->node);
+	free_extent_buffer(root->fs_info->csum_root->commit_root);
 
 	btrfs_free_block_groups(root->fs_info);
 
@@ -2375,17 +2406,14 @@ void btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr)
 	 * looks as though older kernels can get into trouble with
 	 * this code, they end up stuck in balance_dirty_pages forever
 	 */
-	struct extent_io_tree *tree;
 	u64 num_dirty;
-	u64 start = 0;
 	unsigned long thresh = 32 * 1024 * 1024;
-	tree = &BTRFS_I(root->fs_info->btree_inode)->io_tree;
 
 	if (current->flags & PF_MEMALLOC)
 		return;
 
-	num_dirty = count_range_bits(tree, &start, (u64)-1,
-				     thresh, EXTENT_DIRTY);
+	num_dirty = root->fs_info->dirty_metadata_bytes;
+
 	if (num_dirty > thresh) {
 		balance_dirty_pages_ratelimited_nr(
 				   root->fs_info->btree_inode->i_mapping, 1);
diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index 85315d2c90d..9596b40caa4 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -78,7 +78,7 @@ static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
 	btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
 	key.offset = 0;
 
-	inode = btrfs_iget(sb, &key, root, NULL);
+	inode = btrfs_iget(sb, &key, root);
 	if (IS_ERR(inode))
 		return (void *)inode;
 
@@ -192,7 +192,7 @@ static struct dentry *btrfs_get_parent(struct dentry *child)
 	btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
 	key.offset = 0;
 
-	return d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root, NULL));
+	return d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
 }
 
 const struct export_operations btrfs_export_ops = {
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index e4966444811..edc7d208c5c 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -23,50 +23,39 @@
 #include <linux/rcupdate.h>
 #include "compat.h"
 #include "hash.h"
-#include "crc32c.h"
 #include "ctree.h"
 #include "disk-io.h"
 #include "print-tree.h"
 #include "transaction.h"
 #include "volumes.h"
 #include "locking.h"
-#include "ref-cache.h"
 #include "free-space-cache.h"
 
-#define PENDING_EXTENT_INSERT 0
-#define PENDING_EXTENT_DELETE 1
-#define PENDING_BACKREF_UPDATE 2
-
-struct pending_extent_op {
-	int type;
-	u64 bytenr;
-	u64 num_bytes;
-	u64 parent;
-	u64 orig_parent;
-	u64 generation;
-	u64 orig_generation;
-	int level;
-	struct list_head list;
-	int del;
-};
-
-static int __btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-					 struct btrfs_root *root, u64 parent,
-					 u64 root_objectid, u64 ref_generation,
-					 u64 owner, struct btrfs_key *ins,
-					 int ref_mod);
 static int update_reserved_extents(struct btrfs_root *root,
 				   u64 bytenr, u64 num, int reserve);
 static int update_block_group(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *root,
 			      u64 bytenr, u64 num_bytes, int alloc,
 			      int mark_free);
-static noinline int __btrfs_free_extent(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					u64 bytenr, u64 num_bytes, u64 parent,
-					u64 root_objectid, u64 ref_generation,
-					u64 owner_objectid, int pin,
-					int ref_to_drop);
+static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 parent,
+				u64 root_objectid, u64 owner_objectid,
+				u64 owner_offset, int refs_to_drop,
+				struct btrfs_delayed_extent_op *extra_op);
+static void __run_delayed_extent_op(struct btrfs_delayed_extent_op *extent_op,
+				    struct extent_buffer *leaf,
+				    struct btrfs_extent_item *ei);
+static int alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *root,
+				      u64 parent, u64 root_objectid,
+				      u64 flags, u64 owner, u64 offset,
+				      struct btrfs_key *ins, int ref_mod);
+static int alloc_reserved_tree_block(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 parent, u64 root_objectid,
+				     u64 flags, struct btrfs_disk_key *key,
+				     int level, struct btrfs_key *ins);
 
 static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *extent_root, u64 alloc_bytes,
@@ -312,7 +301,7 @@ btrfs_lookup_first_block_group(struct btrfs_fs_info *info, u64 bytenr)
 }
 
 /*
- * return the block group that contains teh given bytenr
+ * return the block group that contains the given bytenr
  */
 struct btrfs_block_group_cache *btrfs_lookup_block_group(
 						 struct btrfs_fs_info *info,
@@ -453,196 +442,966 @@ int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len)
  *    maintenance.  This is actually the same as #2, but with a slightly
  *    different use case.
  *
+ * There are two kinds of back refs. The implicit back refs is optimized
+ * for pointers in non-shared tree blocks. For a given pointer in a block,
+ * back refs of this kind provide information about the block's owner tree
+ * and the pointer's key. These information allow us to find the block by
+ * b-tree searching. The full back refs is for pointers in tree blocks not
+ * referenced by their owner trees. The location of tree block is recorded
+ * in the back refs. Actually the full back refs is generic, and can be
+ * used in all cases the implicit back refs is used. The major shortcoming
+ * of the full back refs is its overhead. Every time a tree block gets
+ * COWed, we have to update back refs entry for all pointers in it.
+ *
+ * For a newly allocated tree block, we use implicit back refs for
+ * pointers in it. This means most tree related operations only involve
+ * implicit back refs. For a tree block created in old transaction, the
+ * only way to drop a reference to it is COW it. So we can detect the
+ * event that tree block loses its owner tree's reference and do the
+ * back refs conversion.
+ *
+ * When a tree block is COW'd through a tree, there are four cases:
+ *
+ * The reference count of the block is one and the tree is the block's
+ * owner tree. Nothing to do in this case.
+ *
+ * The reference count of the block is one and the tree is not the
+ * block's owner tree. In this case, full back refs is used for pointers
+ * in the block. Remove these full back refs, add implicit back refs for
+ * every pointers in the new block.
+ *
+ * The reference count of the block is greater than one and the tree is
+ * the block's owner tree. In this case, implicit back refs is used for
+ * pointers in the block. Add full back refs for every pointers in the
+ * block, increase lower level extents' reference counts. The original
+ * implicit back refs are entailed to the new block.
+ *
+ * The reference count of the block is greater than one and the tree is
+ * not the block's owner tree. Add implicit back refs for every pointer in
+ * the new block, increase lower level extents' reference count.
+ *
+ * Back Reference Key composing:
+ *
+ * The key objectid corresponds to the first byte in the extent,
+ * The key type is used to differentiate between types of back refs.
+ * There are different meanings of the key offset for different types
+ * of back refs.
+ *
  * File extents can be referenced by:
  *
  * - multiple snapshots, subvolumes, or different generations in one subvol
  * - different files inside a single subvolume
  * - different offsets inside a file (bookend extents in file.c)
  *
- * The extent ref structure has fields for:
+ * The extent ref structure for the implicit back refs has fields for:
  *
  * - Objectid of the subvolume root
- * - Generation number of the tree holding the reference
  * - objectid of the file holding the reference
- * - number of references holding by parent node (alway 1 for tree blocks)
- *
- * Btree leaf may hold multiple references to a file extent. In most cases,
- * these references are from same file and the corresponding offsets inside
- * the file are close together.
- *
- * When a file extent is allocated the fields are filled in:
- *     (root_key.objectid, trans->transid, inode objectid, 1)
+ * - original offset in the file
+ * - how many bookend extents
  *
- * When a leaf is cow'd new references are added for every file extent found
- * in the leaf.  It looks similar to the create case, but trans->transid will
- * be different when the block is cow'd.
+ * The key offset for the implicit back refs is hash of the first
+ * three fields.
  *
- *     (root_key.objectid, trans->transid, inode objectid,
- *      number of references in the leaf)
+ * The extent ref structure for the full back refs has field for:
  *
- * When a file extent is removed either during snapshot deletion or
- * file truncation, we find the corresponding back reference and check
- * the following fields:
+ * - number of pointers in the tree leaf
  *
- *     (btrfs_header_owner(leaf), btrfs_header_generation(leaf),
- *      inode objectid)
+ * The key offset for the implicit back refs is the first byte of
+ * the tree leaf
  *
- * Btree extents can be referenced by:
- *
- * - Different subvolumes
- * - Different generations of the same subvolume
- *
- * When a tree block is created, back references are inserted:
+ * When a file extent is allocated, The implicit back refs is used.
+ * the fields are filled in:
  *
- * (root->root_key.objectid, trans->transid, level, 1)
+ *     (root_key.objectid, inode objectid, offset in file, 1)
  *
- * When a tree block is cow'd, new back references are added for all the
- * blocks it points to. If the tree block isn't in reference counted root,
- * the old back references are removed. These new back references are of
- * the form (trans->transid will have increased since creation):
+ * When a file extent is removed file truncation, we find the
+ * corresponding implicit back refs and check the following fields:
  *
- * (root->root_key.objectid, trans->transid, level, 1)
+ *     (btrfs_header_owner(leaf), inode objectid, offset in file)
  *
- * When a backref is in deleting, the following fields are checked:
+ * Btree extents can be referenced by:
  *
- * if backref was for a tree root:
- *     (btrfs_header_owner(itself), btrfs_header_generation(itself), level)
- * else
- *     (btrfs_header_owner(parent), btrfs_header_generation(parent), level)
+ * - Different subvolumes
  *
- * Back Reference Key composing:
+ * Both the implicit back refs and the full back refs for tree blocks
+ * only consist of key. The key offset for the implicit back refs is
+ * objectid of block's owner tree. The key offset for the full back refs
+ * is the first byte of parent block.
  *
- * The key objectid corresponds to the first byte in the extent, the key
- * type is set to BTRFS_EXTENT_REF_KEY, and the key offset is the first
- * byte of parent extent. If a extent is tree root, the key offset is set
- * to the key objectid.
+ * When implicit back refs is used, information about the lowest key and
+ * level of the tree block are required. These information are stored in
+ * tree block info structure.
  */
 
-static noinline int lookup_extent_backref(struct btrfs_trans_handle *trans,
-					  struct btrfs_root *root,
-					  struct btrfs_path *path,
-					  u64 bytenr, u64 parent,
-					  u64 ref_root, u64 ref_generation,
-					  u64 owner_objectid, int del)
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static int convert_extent_item_v0(struct btrfs_trans_handle *trans,
+				  struct btrfs_root *root,
+				  struct btrfs_path *path,
+				  u64 owner, u32 extra_size)
 {
+	struct btrfs_extent_item *item;
+	struct btrfs_extent_item_v0 *ei0;
+	struct btrfs_extent_ref_v0 *ref0;
+	struct btrfs_tree_block_info *bi;
+	struct extent_buffer *leaf;
 	struct btrfs_key key;
-	struct btrfs_extent_ref *ref;
+	struct btrfs_key found_key;
+	u32 new_size = sizeof(*item);
+	u64 refs;
+	int ret;
+
+	leaf = path->nodes[0];
+	BUG_ON(btrfs_item_size_nr(leaf, path->slots[0]) != sizeof(*ei0));
+
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+	ei0 = btrfs_item_ptr(leaf, path->slots[0],
+			     struct btrfs_extent_item_v0);
+	refs = btrfs_extent_refs_v0(leaf, ei0);
+
+	if (owner == (u64)-1) {
+		while (1) {
+			if (path->slots[0] >= btrfs_header_nritems(leaf)) {
+				ret = btrfs_next_leaf(root, path);
+				if (ret < 0)
+					return ret;
+				BUG_ON(ret > 0);
+				leaf = path->nodes[0];
+			}
+			btrfs_item_key_to_cpu(leaf, &found_key,
+					      path->slots[0]);
+			BUG_ON(key.objectid != found_key.objectid);
+			if (found_key.type != BTRFS_EXTENT_REF_V0_KEY) {
+				path->slots[0]++;
+				continue;
+			}
+			ref0 = btrfs_item_ptr(leaf, path->slots[0],
+					      struct btrfs_extent_ref_v0);
+			owner = btrfs_ref_objectid_v0(leaf, ref0);
+			break;
+		}
+	}
+	btrfs_release_path(root, path);
+
+	if (owner < BTRFS_FIRST_FREE_OBJECTID)
+		new_size += sizeof(*bi);
+
+	new_size -= sizeof(*ei0);
+	ret = btrfs_search_slot(trans, root, &key, path,
+				new_size + extra_size, 1);
+	if (ret < 0)
+		return ret;
+	BUG_ON(ret);
+
+	ret = btrfs_extend_item(trans, root, path, new_size);
+	BUG_ON(ret);
+
+	leaf = path->nodes[0];
+	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	btrfs_set_extent_refs(leaf, item, refs);
+	/* FIXME: get real generation */
+	btrfs_set_extent_generation(leaf, item, 0);
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		btrfs_set_extent_flags(leaf, item,
+				       BTRFS_EXTENT_FLAG_TREE_BLOCK |
+				       BTRFS_BLOCK_FLAG_FULL_BACKREF);
+		bi = (struct btrfs_tree_block_info *)(item + 1);
+		/* FIXME: get first key of the block */
+		memset_extent_buffer(leaf, 0, (unsigned long)bi, sizeof(*bi));
+		btrfs_set_tree_block_level(leaf, bi, (int)owner);
+	} else {
+		btrfs_set_extent_flags(leaf, item, BTRFS_EXTENT_FLAG_DATA);
+	}
+	btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+#endif
+
+static u64 hash_extent_data_ref(u64 root_objectid, u64 owner, u64 offset)
+{
+	u32 high_crc = ~(u32)0;
+	u32 low_crc = ~(u32)0;
+	__le64 lenum;
+
+	lenum = cpu_to_le64(root_objectid);
+	high_crc = crc32c(high_crc, &lenum, sizeof(lenum));
+	lenum = cpu_to_le64(owner);
+	low_crc = crc32c(low_crc, &lenum, sizeof(lenum));
+	lenum = cpu_to_le64(offset);
+	low_crc = crc32c(low_crc, &lenum, sizeof(lenum));
+
+	return ((u64)high_crc << 31) ^ (u64)low_crc;
+}
+
+static u64 hash_extent_data_ref_item(struct extent_buffer *leaf,
+				     struct btrfs_extent_data_ref *ref)
+{
+	return hash_extent_data_ref(btrfs_extent_data_ref_root(leaf, ref),
+				    btrfs_extent_data_ref_objectid(leaf, ref),
+				    btrfs_extent_data_ref_offset(leaf, ref));
+}
+
+static int match_extent_data_ref(struct extent_buffer *leaf,
+				 struct btrfs_extent_data_ref *ref,
+				 u64 root_objectid, u64 owner, u64 offset)
+{
+	if (btrfs_extent_data_ref_root(leaf, ref) != root_objectid ||
+	    btrfs_extent_data_ref_objectid(leaf, ref) != owner ||
+	    btrfs_extent_data_ref_offset(leaf, ref) != offset)
+		return 0;
+	return 1;
+}
+
+static noinline int lookup_extent_data_ref(struct btrfs_trans_handle *trans,
+					   struct btrfs_root *root,
+					   struct btrfs_path *path,
+					   u64 bytenr, u64 parent,
+					   u64 root_objectid,
+					   u64 owner, u64 offset)
+{
+	struct btrfs_key key;
+	struct btrfs_extent_data_ref *ref;
 	struct extent_buffer *leaf;
-	u64 ref_objectid;
+	u32 nritems;
 	int ret;
+	int recow;
+	int err = -ENOENT;
 
 	key.objectid = bytenr;
-	key.type = BTRFS_EXTENT_REF_KEY;
-	key.offset = parent;
+	if (parent) {
+		key.type = BTRFS_SHARED_DATA_REF_KEY;
+		key.offset = parent;
+	} else {
+		key.type = BTRFS_EXTENT_DATA_REF_KEY;
+		key.offset = hash_extent_data_ref(root_objectid,
+						  owner, offset);
+	}
+again:
+	recow = 0;
+	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+	if (ret < 0) {
+		err = ret;
+		goto fail;
+	}
 
-	ret = btrfs_search_slot(trans, root, &key, path, del ? -1 : 0, 1);
-	if (ret < 0)
-		goto out;
-	if (ret > 0) {
-		ret = -ENOENT;
-		goto out;
+	if (parent) {
+		if (!ret)
+			return 0;
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		key.type = BTRFS_EXTENT_REF_V0_KEY;
+		btrfs_release_path(root, path);
+		ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+		if (ret < 0) {
+			err = ret;
+			goto fail;
+		}
+		if (!ret)
+			return 0;
+#endif
+		goto fail;
 	}
 
 	leaf = path->nodes[0];
-	ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_ref);
-	ref_objectid = btrfs_ref_objectid(leaf, ref);
-	if (btrfs_ref_root(leaf, ref) != ref_root ||
-	    btrfs_ref_generation(leaf, ref) != ref_generation ||
-	    (ref_objectid != owner_objectid &&
-	     ref_objectid != BTRFS_MULTIPLE_OBJECTIDS)) {
-		ret = -EIO;
-		WARN_ON(1);
-		goto out;
+	nritems = btrfs_header_nritems(leaf);
+	while (1) {
+		if (path->slots[0] >= nritems) {
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0)
+				err = ret;
+			if (ret)
+				goto fail;
+
+			leaf = path->nodes[0];
+			nritems = btrfs_header_nritems(leaf);
+			recow = 1;
+		}
+
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		if (key.objectid != bytenr ||
+		    key.type != BTRFS_EXTENT_DATA_REF_KEY)
+			goto fail;
+
+		ref = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_extent_data_ref);
+
+		if (match_extent_data_ref(leaf, ref, root_objectid,
+					  owner, offset)) {
+			if (recow) {
+				btrfs_release_path(root, path);
+				goto again;
+			}
+			err = 0;
+			break;
+		}
+		path->slots[0]++;
 	}
-	ret = 0;
-out:
-	return ret;
+fail:
+	return err;
 }
 
-static noinline int insert_extent_backref(struct btrfs_trans_handle *trans,
-					  struct btrfs_root *root,
-					  struct btrfs_path *path,
-					  u64 bytenr, u64 parent,
-					  u64 ref_root, u64 ref_generation,
-					  u64 owner_objectid,
-					  int refs_to_add)
+static noinline int insert_extent_data_ref(struct btrfs_trans_handle *trans,
+					   struct btrfs_root *root,
+					   struct btrfs_path *path,
+					   u64 bytenr, u64 parent,
+					   u64 root_objectid, u64 owner,
+					   u64 offset, int refs_to_add)
 {
 	struct btrfs_key key;
 	struct extent_buffer *leaf;
-	struct btrfs_extent_ref *ref;
+	u32 size;
 	u32 num_refs;
 	int ret;
 
 	key.objectid = bytenr;
-	key.type = BTRFS_EXTENT_REF_KEY;
-	key.offset = parent;
+	if (parent) {
+		key.type = BTRFS_SHARED_DATA_REF_KEY;
+		key.offset = parent;
+		size = sizeof(struct btrfs_shared_data_ref);
+	} else {
+		key.type = BTRFS_EXTENT_DATA_REF_KEY;
+		key.offset = hash_extent_data_ref(root_objectid,
+						  owner, offset);
+		size = sizeof(struct btrfs_extent_data_ref);
+	}
 
-	ret = btrfs_insert_empty_item(trans, root, path, &key, sizeof(*ref));
-	if (ret == 0) {
-		leaf = path->nodes[0];
-		ref = btrfs_item_ptr(leaf, path->slots[0],
-				     struct btrfs_extent_ref);
-		btrfs_set_ref_root(leaf, ref, ref_root);
-		btrfs_set_ref_generation(leaf, ref, ref_generation);
-		btrfs_set_ref_objectid(leaf, ref, owner_objectid);
-		btrfs_set_ref_num_refs(leaf, ref, refs_to_add);
-	} else if (ret == -EEXIST) {
-		u64 existing_owner;
-
-		BUG_ON(owner_objectid < BTRFS_FIRST_FREE_OBJECTID);
-		leaf = path->nodes[0];
+	ret = btrfs_insert_empty_item(trans, root, path, &key, size);
+	if (ret && ret != -EEXIST)
+		goto fail;
+
+	leaf = path->nodes[0];
+	if (parent) {
+		struct btrfs_shared_data_ref *ref;
 		ref = btrfs_item_ptr(leaf, path->slots[0],
-				     struct btrfs_extent_ref);
-		if (btrfs_ref_root(leaf, ref) != ref_root ||
-		    btrfs_ref_generation(leaf, ref) != ref_generation) {
-			ret = -EIO;
-			WARN_ON(1);
-			goto out;
+				     struct btrfs_shared_data_ref);
+		if (ret == 0) {
+			btrfs_set_shared_data_ref_count(leaf, ref, refs_to_add);
+		} else {
+			num_refs = btrfs_shared_data_ref_count(leaf, ref);
+			num_refs += refs_to_add;
+			btrfs_set_shared_data_ref_count(leaf, ref, num_refs);
 		}
+	} else {
+		struct btrfs_extent_data_ref *ref;
+		while (ret == -EEXIST) {
+			ref = btrfs_item_ptr(leaf, path->slots[0],
+					     struct btrfs_extent_data_ref);
+			if (match_extent_data_ref(leaf, ref, root_objectid,
+						  owner, offset))
+				break;
+			btrfs_release_path(root, path);
+			key.offset++;
+			ret = btrfs_insert_empty_item(trans, root, path, &key,
+						      size);
+			if (ret && ret != -EEXIST)
+				goto fail;
 
-		num_refs = btrfs_ref_num_refs(leaf, ref);
-		BUG_ON(num_refs == 0);
-		btrfs_set_ref_num_refs(leaf, ref, num_refs + refs_to_add);
-
-		existing_owner = btrfs_ref_objectid(leaf, ref);
-		if (existing_owner != owner_objectid &&
-		    existing_owner != BTRFS_MULTIPLE_OBJECTIDS) {
-			btrfs_set_ref_objectid(leaf, ref,
-					BTRFS_MULTIPLE_OBJECTIDS);
+			leaf = path->nodes[0];
+		}
+		ref = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_extent_data_ref);
+		if (ret == 0) {
+			btrfs_set_extent_data_ref_root(leaf, ref,
+						       root_objectid);
+			btrfs_set_extent_data_ref_objectid(leaf, ref, owner);
+			btrfs_set_extent_data_ref_offset(leaf, ref, offset);
+			btrfs_set_extent_data_ref_count(leaf, ref, refs_to_add);
+		} else {
+			num_refs = btrfs_extent_data_ref_count(leaf, ref);
+			num_refs += refs_to_add;
+			btrfs_set_extent_data_ref_count(leaf, ref, num_refs);
 		}
-		ret = 0;
-	} else {
-		goto out;
 	}
-	btrfs_unlock_up_safe(path, 1);
-	btrfs_mark_buffer_dirty(path->nodes[0]);
-out:
+	btrfs_mark_buffer_dirty(leaf);
+	ret = 0;
+fail:
 	btrfs_release_path(root, path);
 	return ret;
 }
 
-static noinline int remove_extent_backref(struct btrfs_trans_handle *trans,
-					  struct btrfs_root *root,
-					  struct btrfs_path *path,
-					  int refs_to_drop)
+static noinline int remove_extent_data_ref(struct btrfs_trans_handle *trans,
+					   struct btrfs_root *root,
+					   struct btrfs_path *path,
+					   int refs_to_drop)
 {
+	struct btrfs_key key;
+	struct btrfs_extent_data_ref *ref1 = NULL;
+	struct btrfs_shared_data_ref *ref2 = NULL;
 	struct extent_buffer *leaf;
-	struct btrfs_extent_ref *ref;
-	u32 num_refs;
+	u32 num_refs = 0;
 	int ret = 0;
 
 	leaf = path->nodes[0];
-	ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_ref);
-	num_refs = btrfs_ref_num_refs(leaf, ref);
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+
+	if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+		ref1 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_data_ref);
+		num_refs = btrfs_extent_data_ref_count(leaf, ref1);
+	} else if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+		ref2 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_shared_data_ref);
+		num_refs = btrfs_shared_data_ref_count(leaf, ref2);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	} else if (key.type == BTRFS_EXTENT_REF_V0_KEY) {
+		struct btrfs_extent_ref_v0 *ref0;
+		ref0 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_ref_v0);
+		num_refs = btrfs_ref_count_v0(leaf, ref0);
+#endif
+	} else {
+		BUG();
+	}
+
 	BUG_ON(num_refs < refs_to_drop);
 	num_refs -= refs_to_drop;
+
 	if (num_refs == 0) {
 		ret = btrfs_del_item(trans, root, path);
 	} else {
-		btrfs_set_ref_num_refs(leaf, ref, num_refs);
+		if (key.type == BTRFS_EXTENT_DATA_REF_KEY)
+			btrfs_set_extent_data_ref_count(leaf, ref1, num_refs);
+		else if (key.type == BTRFS_SHARED_DATA_REF_KEY)
+			btrfs_set_shared_data_ref_count(leaf, ref2, num_refs);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		else {
+			struct btrfs_extent_ref_v0 *ref0;
+			ref0 = btrfs_item_ptr(leaf, path->slots[0],
+					struct btrfs_extent_ref_v0);
+			btrfs_set_ref_count_v0(leaf, ref0, num_refs);
+		}
+#endif
 		btrfs_mark_buffer_dirty(leaf);
 	}
+	return ret;
+}
+
+static noinline u32 extent_data_ref_count(struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  struct btrfs_extent_inline_ref *iref)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	struct btrfs_extent_data_ref *ref1;
+	struct btrfs_shared_data_ref *ref2;
+	u32 num_refs = 0;
+
+	leaf = path->nodes[0];
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+	if (iref) {
+		if (btrfs_extent_inline_ref_type(leaf, iref) ==
+		    BTRFS_EXTENT_DATA_REF_KEY) {
+			ref1 = (struct btrfs_extent_data_ref *)(&iref->offset);
+			num_refs = btrfs_extent_data_ref_count(leaf, ref1);
+		} else {
+			ref2 = (struct btrfs_shared_data_ref *)(iref + 1);
+			num_refs = btrfs_shared_data_ref_count(leaf, ref2);
+		}
+	} else if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+		ref1 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_data_ref);
+		num_refs = btrfs_extent_data_ref_count(leaf, ref1);
+	} else if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+		ref2 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_shared_data_ref);
+		num_refs = btrfs_shared_data_ref_count(leaf, ref2);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	} else if (key.type == BTRFS_EXTENT_REF_V0_KEY) {
+		struct btrfs_extent_ref_v0 *ref0;
+		ref0 = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_extent_ref_v0);
+		num_refs = btrfs_ref_count_v0(leaf, ref0);
+#endif
+	} else {
+		WARN_ON(1);
+	}
+	return num_refs;
+}
+
+static noinline int lookup_tree_block_ref(struct btrfs_trans_handle *trans,
+					  struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  u64 bytenr, u64 parent,
+					  u64 root_objectid)
+{
+	struct btrfs_key key;
+	int ret;
+
+	key.objectid = bytenr;
+	if (parent) {
+		key.type = BTRFS_SHARED_BLOCK_REF_KEY;
+		key.offset = parent;
+	} else {
+		key.type = BTRFS_TREE_BLOCK_REF_KEY;
+		key.offset = root_objectid;
+	}
+
+	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+	if (ret > 0)
+		ret = -ENOENT;
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (ret == -ENOENT && parent) {
+		btrfs_release_path(root, path);
+		key.type = BTRFS_EXTENT_REF_V0_KEY;
+		ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+		if (ret > 0)
+			ret = -ENOENT;
+	}
+#endif
+	return ret;
+}
+
+static noinline int insert_tree_block_ref(struct btrfs_trans_handle *trans,
+					  struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  u64 bytenr, u64 parent,
+					  u64 root_objectid)
+{
+	struct btrfs_key key;
+	int ret;
+
+	key.objectid = bytenr;
+	if (parent) {
+		key.type = BTRFS_SHARED_BLOCK_REF_KEY;
+		key.offset = parent;
+	} else {
+		key.type = BTRFS_TREE_BLOCK_REF_KEY;
+		key.offset = root_objectid;
+	}
+
+	ret = btrfs_insert_empty_item(trans, root, path, &key, 0);
+	btrfs_release_path(root, path);
+	return ret;
+}
+
+static inline int extent_ref_type(u64 parent, u64 owner)
+{
+	int type;
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		if (parent > 0)
+			type = BTRFS_SHARED_BLOCK_REF_KEY;
+		else
+			type = BTRFS_TREE_BLOCK_REF_KEY;
+	} else {
+		if (parent > 0)
+			type = BTRFS_SHARED_DATA_REF_KEY;
+		else
+			type = BTRFS_EXTENT_DATA_REF_KEY;
+	}
+	return type;
+}
+
+static int find_next_key(struct btrfs_path *path, struct btrfs_key *key)
+
+{
+	int level;
+	BUG_ON(!path->keep_locks);
+	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+		if (!path->nodes[level])
+			break;
+		btrfs_assert_tree_locked(path->nodes[level]);
+		if (path->slots[level] + 1 >=
+		    btrfs_header_nritems(path->nodes[level]))
+			continue;
+		if (level == 0)
+			btrfs_item_key_to_cpu(path->nodes[level], key,
+					      path->slots[level] + 1);
+		else
+			btrfs_node_key_to_cpu(path->nodes[level], key,
+					      path->slots[level] + 1);
+		return 0;
+	}
+	return 1;
+}
+
+/*
+ * look for inline back ref. if back ref is found, *ref_ret is set
+ * to the address of inline back ref, and 0 is returned.
+ *
+ * if back ref isn't found, *ref_ret is set to the address where it
+ * should be inserted, and -ENOENT is returned.
+ *
+ * if insert is true and there are too many inline back refs, the path
+ * points to the extent item, and -EAGAIN is returned.
+ *
+ * NOTE: inline back refs are ordered in the same way that back ref
+ *	 items in the tree are ordered.
+ */
+static noinline_for_stack
+int lookup_inline_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref **ref_ret,
+				 u64 bytenr, u64 num_bytes,
+				 u64 parent, u64 root_objectid,
+				 u64 owner, u64 offset, int insert)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *iref;
+	u64 flags;
+	u64 item_size;
+	unsigned long ptr;
+	unsigned long end;
+	int extra_size;
+	int type;
+	int want;
+	int ret;
+	int err = 0;
+
+	key.objectid = bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = num_bytes;
+
+	want = extent_ref_type(parent, owner);
+	if (insert) {
+		extra_size = btrfs_extent_inline_ref_size(want);
+		path->keep_locks = 1;
+	} else
+		extra_size = -1;
+	ret = btrfs_search_slot(trans, root, &key, path, extra_size, 1);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+	BUG_ON(ret);
+
+	leaf = path->nodes[0];
+	item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		if (!insert) {
+			err = -ENOENT;
+			goto out;
+		}
+		ret = convert_extent_item_v0(trans, root, path, owner,
+					     extra_size);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		leaf = path->nodes[0];
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+	}
+#endif
+	BUG_ON(item_size < sizeof(*ei));
+
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	flags = btrfs_extent_flags(leaf, ei);
+
+	ptr = (unsigned long)(ei + 1);
+	end = (unsigned long)ei + item_size;
+
+	if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+		ptr += sizeof(struct btrfs_tree_block_info);
+		BUG_ON(ptr > end);
+	} else {
+		BUG_ON(!(flags & BTRFS_EXTENT_FLAG_DATA));
+	}
+
+	err = -ENOENT;
+	while (1) {
+		if (ptr >= end) {
+			WARN_ON(ptr > end);
+			break;
+		}
+		iref = (struct btrfs_extent_inline_ref *)ptr;
+		type = btrfs_extent_inline_ref_type(leaf, iref);
+		if (want < type)
+			break;
+		if (want > type) {
+			ptr += btrfs_extent_inline_ref_size(type);
+			continue;
+		}
+
+		if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+			struct btrfs_extent_data_ref *dref;
+			dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+			if (match_extent_data_ref(leaf, dref, root_objectid,
+						  owner, offset)) {
+				err = 0;
+				break;
+			}
+			if (hash_extent_data_ref_item(leaf, dref) <
+			    hash_extent_data_ref(root_objectid, owner, offset))
+				break;
+		} else {
+			u64 ref_offset;
+			ref_offset = btrfs_extent_inline_ref_offset(leaf, iref);
+			if (parent > 0) {
+				if (parent == ref_offset) {
+					err = 0;
+					break;
+				}
+				if (ref_offset < parent)
+					break;
+			} else {
+				if (root_objectid == ref_offset) {
+					err = 0;
+					break;
+				}
+				if (ref_offset < root_objectid)
+					break;
+			}
+		}
+		ptr += btrfs_extent_inline_ref_size(type);
+	}
+	if (err == -ENOENT && insert) {
+		if (item_size + extra_size >=
+		    BTRFS_MAX_EXTENT_ITEM_SIZE(root)) {
+			err = -EAGAIN;
+			goto out;
+		}
+		/*
+		 * To add new inline back ref, we have to make sure
+		 * there is no corresponding back ref item.
+		 * For simplicity, we just do not add new inline back
+		 * ref if there is any kind of item for this block
+		 */
+		if (find_next_key(path, &key) == 0 && key.objectid == bytenr &&
+		    key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) {
+			err = -EAGAIN;
+			goto out;
+		}
+	}
+	*ref_ret = (struct btrfs_extent_inline_ref *)ptr;
+out:
+	if (insert) {
+		path->keep_locks = 0;
+		btrfs_unlock_up_safe(path, 1);
+	}
+	return err;
+}
+
+/*
+ * helper to add new inline back ref
+ */
+static noinline_for_stack
+int setup_inline_extent_backref(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				struct btrfs_path *path,
+				struct btrfs_extent_inline_ref *iref,
+				u64 parent, u64 root_objectid,
+				u64 owner, u64 offset, int refs_to_add,
+				struct btrfs_delayed_extent_op *extent_op)
+{
+	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	unsigned long ptr;
+	unsigned long end;
+	unsigned long item_offset;
+	u64 refs;
+	int size;
+	int type;
+	int ret;
+
+	leaf = path->nodes[0];
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	item_offset = (unsigned long)iref - (unsigned long)ei;
+
+	type = extent_ref_type(parent, owner);
+	size = btrfs_extent_inline_ref_size(type);
+
+	ret = btrfs_extend_item(trans, root, path, size);
+	BUG_ON(ret);
+
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	refs = btrfs_extent_refs(leaf, ei);
+	refs += refs_to_add;
+	btrfs_set_extent_refs(leaf, ei, refs);
+	if (extent_op)
+		__run_delayed_extent_op(extent_op, leaf, ei);
+
+	ptr = (unsigned long)ei + item_offset;
+	end = (unsigned long)ei + btrfs_item_size_nr(leaf, path->slots[0]);
+	if (ptr < end - size)
+		memmove_extent_buffer(leaf, ptr + size, ptr,
+				      end - size - ptr);
+
+	iref = (struct btrfs_extent_inline_ref *)ptr;
+	btrfs_set_extent_inline_ref_type(leaf, iref, type);
+	if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+		struct btrfs_extent_data_ref *dref;
+		dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+		btrfs_set_extent_data_ref_root(leaf, dref, root_objectid);
+		btrfs_set_extent_data_ref_objectid(leaf, dref, owner);
+		btrfs_set_extent_data_ref_offset(leaf, dref, offset);
+		btrfs_set_extent_data_ref_count(leaf, dref, refs_to_add);
+	} else if (type == BTRFS_SHARED_DATA_REF_KEY) {
+		struct btrfs_shared_data_ref *sref;
+		sref = (struct btrfs_shared_data_ref *)(iref + 1);
+		btrfs_set_shared_data_ref_count(leaf, sref, refs_to_add);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+	} else if (type == BTRFS_SHARED_BLOCK_REF_KEY) {
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+	} else {
+		btrfs_set_extent_inline_ref_offset(leaf, iref, root_objectid);
+	}
+	btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+
+static int lookup_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref **ref_ret,
+				 u64 bytenr, u64 num_bytes, u64 parent,
+				 u64 root_objectid, u64 owner, u64 offset)
+{
+	int ret;
+
+	ret = lookup_inline_extent_backref(trans, root, path, ref_ret,
+					   bytenr, num_bytes, parent,
+					   root_objectid, owner, offset, 0);
+	if (ret != -ENOENT)
+		return ret;
+
 	btrfs_release_path(root, path);
+	*ref_ret = NULL;
+
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		ret = lookup_tree_block_ref(trans, root, path, bytenr, parent,
+					    root_objectid);
+	} else {
+		ret = lookup_extent_data_ref(trans, root, path, bytenr, parent,
+					     root_objectid, owner, offset);
+	}
+	return ret;
+}
+
+/*
+ * helper to update/remove inline back ref
+ */
+static noinline_for_stack
+int update_inline_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref *iref,
+				 int refs_to_mod,
+				 struct btrfs_delayed_extent_op *extent_op)
+{
+	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_data_ref *dref = NULL;
+	struct btrfs_shared_data_ref *sref = NULL;
+	unsigned long ptr;
+	unsigned long end;
+	u32 item_size;
+	int size;
+	int type;
+	int ret;
+	u64 refs;
+
+	leaf = path->nodes[0];
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	refs = btrfs_extent_refs(leaf, ei);
+	WARN_ON(refs_to_mod < 0 && refs + refs_to_mod <= 0);
+	refs += refs_to_mod;
+	btrfs_set_extent_refs(leaf, ei, refs);
+	if (extent_op)
+		__run_delayed_extent_op(extent_op, leaf, ei);
+
+	type = btrfs_extent_inline_ref_type(leaf, iref);
+
+	if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+		dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+		refs = btrfs_extent_data_ref_count(leaf, dref);
+	} else if (type == BTRFS_SHARED_DATA_REF_KEY) {
+		sref = (struct btrfs_shared_data_ref *)(iref + 1);
+		refs = btrfs_shared_data_ref_count(leaf, sref);
+	} else {
+		refs = 1;
+		BUG_ON(refs_to_mod != -1);
+	}
+
+	BUG_ON(refs_to_mod < 0 && refs < -refs_to_mod);
+	refs += refs_to_mod;
+
+	if (refs > 0) {
+		if (type == BTRFS_EXTENT_DATA_REF_KEY)
+			btrfs_set_extent_data_ref_count(leaf, dref, refs);
+		else
+			btrfs_set_shared_data_ref_count(leaf, sref, refs);
+	} else {
+		size =  btrfs_extent_inline_ref_size(type);
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+		ptr = (unsigned long)iref;
+		end = (unsigned long)ei + item_size;
+		if (ptr + size < end)
+			memmove_extent_buffer(leaf, ptr, ptr + size,
+					      end - ptr - size);
+		item_size -= size;
+		ret = btrfs_truncate_item(trans, root, path, item_size, 1);
+		BUG_ON(ret);
+	}
+	btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+
+static noinline_for_stack
+int insert_inline_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 u64 bytenr, u64 num_bytes, u64 parent,
+				 u64 root_objectid, u64 owner,
+				 u64 offset, int refs_to_add,
+				 struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_extent_inline_ref *iref;
+	int ret;
+
+	ret = lookup_inline_extent_backref(trans, root, path, &iref,
+					   bytenr, num_bytes, parent,
+					   root_objectid, owner, offset, 1);
+	if (ret == 0) {
+		BUG_ON(owner < BTRFS_FIRST_FREE_OBJECTID);
+		ret = update_inline_extent_backref(trans, root, path, iref,
+						   refs_to_add, extent_op);
+	} else if (ret == -ENOENT) {
+		ret = setup_inline_extent_backref(trans, root, path, iref,
+						  parent, root_objectid,
+						  owner, offset, refs_to_add,
+						  extent_op);
+	}
+	return ret;
+}
+
+static int insert_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 u64 bytenr, u64 parent, u64 root_objectid,
+				 u64 owner, u64 offset, int refs_to_add)
+{
+	int ret;
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		BUG_ON(refs_to_add != 1);
+		ret = insert_tree_block_ref(trans, root, path, bytenr,
+					    parent, root_objectid);
+	} else {
+		ret = insert_extent_data_ref(trans, root, path, bytenr,
+					     parent, root_objectid,
+					     owner, offset, refs_to_add);
+	}
+	return ret;
+}
+
+static int remove_extent_backref(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct btrfs_extent_inline_ref *iref,
+				 int refs_to_drop, int is_data)
+{
+	int ret;
+
+	BUG_ON(!is_data && refs_to_drop != 1);
+	if (iref) {
+		ret = update_inline_extent_backref(trans, root, path, iref,
+						   -refs_to_drop, NULL);
+	} else if (is_data) {
+		ret = remove_extent_data_ref(trans, root, path, refs_to_drop);
+	} else {
+		ret = btrfs_del_item(trans, root, path);
+	}
 	return ret;
 }
 
@@ -686,71 +1445,40 @@ static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr,
 #endif
 }
 
-static int __btrfs_update_extent_ref(struct btrfs_trans_handle *trans,
-				     struct btrfs_root *root, u64 bytenr,
-				     u64 num_bytes,
-				     u64 orig_parent, u64 parent,
-				     u64 orig_root, u64 ref_root,
-				     u64 orig_generation, u64 ref_generation,
-				     u64 owner_objectid)
+int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
+			 struct btrfs_root *root,
+			 u64 bytenr, u64 num_bytes, u64 parent,
+			 u64 root_objectid, u64 owner, u64 offset)
 {
 	int ret;
-	int pin = owner_objectid < BTRFS_FIRST_FREE_OBJECTID;
+	BUG_ON(owner < BTRFS_FIRST_FREE_OBJECTID &&
+	       root_objectid == BTRFS_TREE_LOG_OBJECTID);
 
-	ret = btrfs_update_delayed_ref(trans, bytenr, num_bytes,
-				       orig_parent, parent, orig_root,
-				       ref_root, orig_generation,
-				       ref_generation, owner_objectid, pin);
-	BUG_ON(ret);
+	if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		ret = btrfs_add_delayed_tree_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, (int)owner,
+					BTRFS_ADD_DELAYED_REF, NULL);
+	} else {
+		ret = btrfs_add_delayed_data_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, owner, offset,
+					BTRFS_ADD_DELAYED_REF, NULL);
+	}
 	return ret;
 }
 
-int btrfs_update_extent_ref(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root, u64 bytenr,
-			    u64 num_bytes, u64 orig_parent, u64 parent,
-			    u64 ref_root, u64 ref_generation,
-			    u64 owner_objectid)
-{
-	int ret;
-	if (ref_root == BTRFS_TREE_LOG_OBJECTID &&
-	    owner_objectid < BTRFS_FIRST_FREE_OBJECTID)
-		return 0;
-
-	ret = __btrfs_update_extent_ref(trans, root, bytenr, num_bytes,
-					orig_parent, parent, ref_root,
-					ref_root, ref_generation,
-					ref_generation, owner_objectid);
-	return ret;
-}
 static int __btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
-				  struct btrfs_root *root, u64 bytenr,
-				  u64 num_bytes,
-				  u64 orig_parent, u64 parent,
-				  u64 orig_root, u64 ref_root,
-				  u64 orig_generation, u64 ref_generation,
-				  u64 owner_objectid)
-{
-	int ret;
-
-	ret = btrfs_add_delayed_ref(trans, bytenr, num_bytes, parent, ref_root,
-				    ref_generation, owner_objectid,
-				    BTRFS_ADD_DELAYED_REF, 0);
-	BUG_ON(ret);
-	return ret;
-}
-
-static noinline_for_stack int add_extent_ref(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root, u64 bytenr,
-			  u64 num_bytes, u64 parent, u64 ref_root,
-			  u64 ref_generation, u64 owner_objectid,
-			  int refs_to_add)
+				  struct btrfs_root *root,
+				  u64 bytenr, u64 num_bytes,
+				  u64 parent, u64 root_objectid,
+				  u64 owner, u64 offset, int refs_to_add,
+				  struct btrfs_delayed_extent_op *extent_op)
 {
 	struct btrfs_path *path;
-	int ret;
-	struct btrfs_key key;
-	struct extent_buffer *l;
+	struct extent_buffer *leaf;
 	struct btrfs_extent_item *item;
-	u32 refs;
+	u64 refs;
+	int ret;
+	int err = 0;
 
 	path = btrfs_alloc_path();
 	if (!path)
@@ -758,43 +1486,27 @@ static noinline_for_stack int add_extent_ref(struct btrfs_trans_handle *trans,
 
 	path->reada = 1;
 	path->leave_spinning = 1;
-	key.objectid = bytenr;
-	key.type = BTRFS_EXTENT_ITEM_KEY;
-	key.offset = num_bytes;
-
-	/* first find the extent item and update its reference count */
-	ret = btrfs_search_slot(trans, root->fs_info->extent_root, &key,
-				path, 0, 1);
-	if (ret < 0) {
-		btrfs_set_path_blocking(path);
-		return ret;
-	}
-
-	if (ret > 0) {
-		WARN_ON(1);
-		btrfs_free_path(path);
-		return -EIO;
-	}
-	l = path->nodes[0];
+	/* this will setup the path even if it fails to insert the back ref */
+	ret = insert_inline_extent_backref(trans, root->fs_info->extent_root,
+					   path, bytenr, num_bytes, parent,
+					   root_objectid, owner, offset,
+					   refs_to_add, extent_op);
+	if (ret == 0)
+		goto out;
 
-	btrfs_item_key_to_cpu(l, &key, path->slots[0]);
-	if (key.objectid != bytenr) {
-		btrfs_print_leaf(root->fs_info->extent_root, path->nodes[0]);
-		printk(KERN_ERR "btrfs wanted %llu found %llu\n",
-		       (unsigned long long)bytenr,
-		       (unsigned long long)key.objectid);
-		BUG();
+	if (ret != -EAGAIN) {
+		err = ret;
+		goto out;
 	}
-	BUG_ON(key.type != BTRFS_EXTENT_ITEM_KEY);
 
-	item = btrfs_item_ptr(l, path->slots[0], struct btrfs_extent_item);
-
-	refs = btrfs_extent_refs(l, item);
-	btrfs_set_extent_refs(l, item, refs + refs_to_add);
-	btrfs_unlock_up_safe(path, 1);
-
-	btrfs_mark_buffer_dirty(path->nodes[0]);
+	leaf = path->nodes[0];
+	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	refs = btrfs_extent_refs(leaf, item);
+	btrfs_set_extent_refs(leaf, item, refs + refs_to_add);
+	if (extent_op)
+		__run_delayed_extent_op(extent_op, leaf, item);
 
+	btrfs_mark_buffer_dirty(leaf);
 	btrfs_release_path(root->fs_info->extent_root, path);
 
 	path->reada = 1;
@@ -802,56 +1514,197 @@ static noinline_for_stack int add_extent_ref(struct btrfs_trans_handle *trans,
 
 	/* now insert the actual backref */
 	ret = insert_extent_backref(trans, root->fs_info->extent_root,
-				    path, bytenr, parent,
-				    ref_root, ref_generation,
-				    owner_objectid, refs_to_add);
+				    path, bytenr, parent, root_objectid,
+				    owner, offset, refs_to_add);
 	BUG_ON(ret);
+out:
 	btrfs_free_path(path);
-	return 0;
+	return err;
 }
 
-int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
-			 struct btrfs_root *root,
-			 u64 bytenr, u64 num_bytes, u64 parent,
-			 u64 ref_root, u64 ref_generation,
-			 u64 owner_objectid)
+static int run_delayed_data_ref(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				struct btrfs_delayed_ref_node *node,
+				struct btrfs_delayed_extent_op *extent_op,
+				int insert_reserved)
 {
-	int ret;
-	if (ref_root == BTRFS_TREE_LOG_OBJECTID &&
-	    owner_objectid < BTRFS_FIRST_FREE_OBJECTID)
-		return 0;
+	int ret = 0;
+	struct btrfs_delayed_data_ref *ref;
+	struct btrfs_key ins;
+	u64 parent = 0;
+	u64 ref_root = 0;
+	u64 flags = 0;
+
+	ins.objectid = node->bytenr;
+	ins.offset = node->num_bytes;
+	ins.type = BTRFS_EXTENT_ITEM_KEY;
+
+	ref = btrfs_delayed_node_to_data_ref(node);
+	if (node->type == BTRFS_SHARED_DATA_REF_KEY)
+		parent = ref->parent;
+	else
+		ref_root = ref->root;
 
-	ret = __btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0, parent,
-				     0, ref_root, 0, ref_generation,
-				     owner_objectid);
+	if (node->action == BTRFS_ADD_DELAYED_REF && insert_reserved) {
+		if (extent_op) {
+			BUG_ON(extent_op->update_key);
+			flags |= extent_op->flags_to_set;
+		}
+		ret = alloc_reserved_file_extent(trans, root,
+						 parent, ref_root, flags,
+						 ref->objectid, ref->offset,
+						 &ins, node->ref_mod);
+		update_reserved_extents(root, ins.objectid, ins.offset, 0);
+	} else if (node->action == BTRFS_ADD_DELAYED_REF) {
+		ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
+					     node->num_bytes, parent,
+					     ref_root, ref->objectid,
+					     ref->offset, node->ref_mod,
+					     extent_op);
+	} else if (node->action == BTRFS_DROP_DELAYED_REF) {
+		ret = __btrfs_free_extent(trans, root, node->bytenr,
+					  node->num_bytes, parent,
+					  ref_root, ref->objectid,
+					  ref->offset, node->ref_mod,
+					  extent_op);
+	} else {
+		BUG();
+	}
 	return ret;
 }
 
-static int drop_delayed_ref(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					struct btrfs_delayed_ref_node *node)
+static void __run_delayed_extent_op(struct btrfs_delayed_extent_op *extent_op,
+				    struct extent_buffer *leaf,
+				    struct btrfs_extent_item *ei)
+{
+	u64 flags = btrfs_extent_flags(leaf, ei);
+	if (extent_op->update_flags) {
+		flags |= extent_op->flags_to_set;
+		btrfs_set_extent_flags(leaf, ei, flags);
+	}
+
+	if (extent_op->update_key) {
+		struct btrfs_tree_block_info *bi;
+		BUG_ON(!(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK));
+		bi = (struct btrfs_tree_block_info *)(ei + 1);
+		btrfs_set_tree_block_key(leaf, bi, &extent_op->key);
+	}
+}
+
+static int run_delayed_extent_op(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_delayed_ref_node *node,
+				 struct btrfs_delayed_extent_op *extent_op)
+{
+	struct btrfs_key key;
+	struct btrfs_path *path;
+	struct btrfs_extent_item *ei;
+	struct extent_buffer *leaf;
+	u32 item_size;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	key.objectid = node->bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = node->num_bytes;
+
+	path->reada = 1;
+	path->leave_spinning = 1;
+	ret = btrfs_search_slot(trans, root->fs_info->extent_root, &key,
+				path, 0, 1);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+	if (ret > 0) {
+		err = -EIO;
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		ret = convert_extent_item_v0(trans, root->fs_info->extent_root,
+					     path, (u64)-1, 0);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		leaf = path->nodes[0];
+		item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+	}
+#endif
+	BUG_ON(item_size < sizeof(*ei));
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
+	__run_delayed_extent_op(extent_op, leaf, ei);
+
+	btrfs_mark_buffer_dirty(leaf);
+out:
+	btrfs_free_path(path);
+	return err;
+}
+
+static int run_delayed_tree_ref(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				struct btrfs_delayed_ref_node *node,
+				struct btrfs_delayed_extent_op *extent_op,
+				int insert_reserved)
 {
 	int ret = 0;
-	struct btrfs_delayed_ref *ref = btrfs_delayed_node_to_ref(node);
+	struct btrfs_delayed_tree_ref *ref;
+	struct btrfs_key ins;
+	u64 parent = 0;
+	u64 ref_root = 0;
 
-	BUG_ON(node->ref_mod == 0);
-	ret = __btrfs_free_extent(trans, root, node->bytenr, node->num_bytes,
-				  node->parent, ref->root, ref->generation,
-				  ref->owner_objectid, ref->pin, node->ref_mod);
+	ins.objectid = node->bytenr;
+	ins.offset = node->num_bytes;
+	ins.type = BTRFS_EXTENT_ITEM_KEY;
 
+	ref = btrfs_delayed_node_to_tree_ref(node);
+	if (node->type == BTRFS_SHARED_BLOCK_REF_KEY)
+		parent = ref->parent;
+	else
+		ref_root = ref->root;
+
+	BUG_ON(node->ref_mod != 1);
+	if (node->action == BTRFS_ADD_DELAYED_REF && insert_reserved) {
+		BUG_ON(!extent_op || !extent_op->update_flags ||
+		       !extent_op->update_key);
+		ret = alloc_reserved_tree_block(trans, root,
+						parent, ref_root,
+						extent_op->flags_to_set,
+						&extent_op->key,
+						ref->level, &ins);
+		update_reserved_extents(root, ins.objectid, ins.offset, 0);
+	} else if (node->action == BTRFS_ADD_DELAYED_REF) {
+		ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
+					     node->num_bytes, parent, ref_root,
+					     ref->level, 0, 1, extent_op);
+	} else if (node->action == BTRFS_DROP_DELAYED_REF) {
+		ret = __btrfs_free_extent(trans, root, node->bytenr,
+					  node->num_bytes, parent, ref_root,
+					  ref->level, 0, 1, extent_op);
+	} else {
+		BUG();
+	}
 	return ret;
 }
 
+
 /* helper function to actually process a single delayed ref entry */
-static noinline int run_one_delayed_ref(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					struct btrfs_delayed_ref_node *node,
-					int insert_reserved)
+static int run_one_delayed_ref(struct btrfs_trans_handle *trans,
+			       struct btrfs_root *root,
+			       struct btrfs_delayed_ref_node *node,
+			       struct btrfs_delayed_extent_op *extent_op,
+			       int insert_reserved)
 {
 	int ret;
-	struct btrfs_delayed_ref *ref;
-
-	if (node->parent == (u64)-1) {
+	if (btrfs_delayed_ref_is_head(node)) {
 		struct btrfs_delayed_ref_head *head;
 		/*
 		 * we've hit the end of the chain and we were supposed
@@ -859,44 +1712,35 @@ static noinline int run_one_delayed_ref(struct btrfs_trans_handle *trans,
 		 * deleted before we ever needed to insert it, so all
 		 * we have to do is clean up the accounting
 		 */
+		BUG_ON(extent_op);
+		head = btrfs_delayed_node_to_head(node);
 		if (insert_reserved) {
+			if (head->is_data) {
+				ret = btrfs_del_csums(trans, root,
+						      node->bytenr,
+						      node->num_bytes);
+				BUG_ON(ret);
+			}
+			btrfs_update_pinned_extents(root, node->bytenr,
+						    node->num_bytes, 1);
 			update_reserved_extents(root, node->bytenr,
 						node->num_bytes, 0);
 		}
-		head = btrfs_delayed_node_to_head(node);
 		mutex_unlock(&head->mutex);
 		return 0;
 	}
 
-	ref = btrfs_delayed_node_to_ref(node);
-	if (ref->action == BTRFS_ADD_DELAYED_REF) {
-		if (insert_reserved) {
-			struct btrfs_key ins;
-
-			ins.objectid = node->bytenr;
-			ins.offset = node->num_bytes;
-			ins.type = BTRFS_EXTENT_ITEM_KEY;
-
-			/* record the full extent allocation */
-			ret = __btrfs_alloc_reserved_extent(trans, root,
-					node->parent, ref->root,
-					ref->generation, ref->owner_objectid,
-					&ins, node->ref_mod);
-			update_reserved_extents(root, node->bytenr,
-						node->num_bytes, 0);
-		} else {
-			/* just add one backref */
-			ret = add_extent_ref(trans, root, node->bytenr,
-				     node->num_bytes,
-				     node->parent, ref->root, ref->generation,
-				     ref->owner_objectid, node->ref_mod);
-		}
-		BUG_ON(ret);
-	} else if (ref->action == BTRFS_DROP_DELAYED_REF) {
-		WARN_ON(insert_reserved);
-		ret = drop_delayed_ref(trans, root, node);
-	}
-	return 0;
+	if (node->type == BTRFS_TREE_BLOCK_REF_KEY ||
+	    node->type == BTRFS_SHARED_BLOCK_REF_KEY)
+		ret = run_delayed_tree_ref(trans, root, node, extent_op,
+					   insert_reserved);
+	else if (node->type == BTRFS_EXTENT_DATA_REF_KEY ||
+		 node->type == BTRFS_SHARED_DATA_REF_KEY)
+		ret = run_delayed_data_ref(trans, root, node, extent_op,
+					   insert_reserved);
+	else
+		BUG();
+	return ret;
 }
 
 static noinline struct btrfs_delayed_ref_node *
@@ -919,7 +1763,7 @@ again:
 				rb_node);
 		if (ref->bytenr != head->node.bytenr)
 			break;
-		if (btrfs_delayed_node_to_ref(ref)->action == action)
+		if (ref->action == action)
 			return ref;
 		node = rb_prev(node);
 	}
@@ -937,6 +1781,7 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 	struct btrfs_delayed_ref_root *delayed_refs;
 	struct btrfs_delayed_ref_node *ref;
 	struct btrfs_delayed_ref_head *locked_ref = NULL;
+	struct btrfs_delayed_extent_op *extent_op;
 	int ret;
 	int count = 0;
 	int must_insert_reserved = 0;
@@ -975,6 +1820,9 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 		must_insert_reserved = locked_ref->must_insert_reserved;
 		locked_ref->must_insert_reserved = 0;
 
+		extent_op = locked_ref->extent_op;
+		locked_ref->extent_op = NULL;
+
 		/*
 		 * locked_ref is the head node, so we have to go one
 		 * node back for any delayed ref updates
@@ -986,6 +1834,25 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 			 * so that any accounting fixes can happen
 			 */
 			ref = &locked_ref->node;
+
+			if (extent_op && must_insert_reserved) {
+				kfree(extent_op);
+				extent_op = NULL;
+			}
+
+			if (extent_op) {
+				spin_unlock(&delayed_refs->lock);
+
+				ret = run_delayed_extent_op(trans, root,
+							    ref, extent_op);
+				BUG_ON(ret);
+				kfree(extent_op);
+
+				cond_resched();
+				spin_lock(&delayed_refs->lock);
+				continue;
+			}
+
 			list_del_init(&locked_ref->cluster);
 			locked_ref = NULL;
 		}
@@ -993,14 +1860,17 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans,
 		ref->in_tree = 0;
 		rb_erase(&ref->rb_node, &delayed_refs->root);
 		delayed_refs->num_entries--;
+
 		spin_unlock(&delayed_refs->lock);
 
-		ret = run_one_delayed_ref(trans, root, ref,
+		ret = run_one_delayed_ref(trans, root, ref, extent_op,
 					  must_insert_reserved);
 		BUG_ON(ret);
-		btrfs_put_delayed_ref(ref);
 
+		btrfs_put_delayed_ref(ref);
+		kfree(extent_op);
 		count++;
+
 		cond_resched();
 		spin_lock(&delayed_refs->lock);
 	}
@@ -1095,25 +1965,112 @@ out:
 	return 0;
 }
 
-int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root, u64 objectid, u64 bytenr)
+int btrfs_set_disk_extent_flags(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 flags,
+				int is_data)
+{
+	struct btrfs_delayed_extent_op *extent_op;
+	int ret;
+
+	extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
+	if (!extent_op)
+		return -ENOMEM;
+
+	extent_op->flags_to_set = flags;
+	extent_op->update_flags = 1;
+	extent_op->update_key = 0;
+	extent_op->is_data = is_data ? 1 : 0;
+
+	ret = btrfs_add_delayed_extent_op(trans, bytenr, num_bytes, extent_op);
+	if (ret)
+		kfree(extent_op);
+	return ret;
+}
+
+static noinline int check_delayed_ref(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *root,
+				      struct btrfs_path *path,
+				      u64 objectid, u64 offset, u64 bytenr)
+{
+	struct btrfs_delayed_ref_head *head;
+	struct btrfs_delayed_ref_node *ref;
+	struct btrfs_delayed_data_ref *data_ref;
+	struct btrfs_delayed_ref_root *delayed_refs;
+	struct rb_node *node;
+	int ret = 0;
+
+	ret = -ENOENT;
+	delayed_refs = &trans->transaction->delayed_refs;
+	spin_lock(&delayed_refs->lock);
+	head = btrfs_find_delayed_ref_head(trans, bytenr);
+	if (!head)
+		goto out;
+
+	if (!mutex_trylock(&head->mutex)) {
+		atomic_inc(&head->node.refs);
+		spin_unlock(&delayed_refs->lock);
+
+		btrfs_release_path(root->fs_info->extent_root, path);
+
+		mutex_lock(&head->mutex);
+		mutex_unlock(&head->mutex);
+		btrfs_put_delayed_ref(&head->node);
+		return -EAGAIN;
+	}
+
+	node = rb_prev(&head->node.rb_node);
+	if (!node)
+		goto out_unlock;
+
+	ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
+
+	if (ref->bytenr != bytenr)
+		goto out_unlock;
+
+	ret = 1;
+	if (ref->type != BTRFS_EXTENT_DATA_REF_KEY)
+		goto out_unlock;
+
+	data_ref = btrfs_delayed_node_to_data_ref(ref);
+
+	node = rb_prev(node);
+	if (node) {
+		ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
+		if (ref->bytenr == bytenr)
+			goto out_unlock;
+	}
+
+	if (data_ref->root != root->root_key.objectid ||
+	    data_ref->objectid != objectid || data_ref->offset != offset)
+		goto out_unlock;
+
+	ret = 0;
+out_unlock:
+	mutex_unlock(&head->mutex);
+out:
+	spin_unlock(&delayed_refs->lock);
+	return ret;
+}
+
+static noinline int check_committed_ref(struct btrfs_trans_handle *trans,
+					struct btrfs_root *root,
+					struct btrfs_path *path,
+					u64 objectid, u64 offset, u64 bytenr)
 {
 	struct btrfs_root *extent_root = root->fs_info->extent_root;
-	struct btrfs_path *path;
 	struct extent_buffer *leaf;
-	struct btrfs_extent_ref *ref_item;
+	struct btrfs_extent_data_ref *ref;
+	struct btrfs_extent_inline_ref *iref;
+	struct btrfs_extent_item *ei;
 	struct btrfs_key key;
-	struct btrfs_key found_key;
-	u64 ref_root;
-	u64 last_snapshot;
-	u32 nritems;
+	u32 item_size;
 	int ret;
 
 	key.objectid = bytenr;
 	key.offset = (u64)-1;
 	key.type = BTRFS_EXTENT_ITEM_KEY;
 
-	path = btrfs_alloc_path();
 	ret = btrfs_search_slot(NULL, extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto out;
@@ -1125,55 +2082,83 @@ int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
 
 	path->slots[0]--;
 	leaf = path->nodes[0];
-	btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
+	btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
 
-	if (found_key.objectid != bytenr ||
-	    found_key.type != BTRFS_EXTENT_ITEM_KEY)
+	if (key.objectid != bytenr || key.type != BTRFS_EXTENT_ITEM_KEY)
 		goto out;
 
-	last_snapshot = btrfs_root_last_snapshot(&root->root_item);
-	while (1) {
-		leaf = path->nodes[0];
-		nritems = btrfs_header_nritems(leaf);
-		if (path->slots[0] >= nritems) {
-			ret = btrfs_next_leaf(extent_root, path);
-			if (ret < 0)
-				goto out;
-			if (ret == 0)
-				continue;
-			break;
-		}
-		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
-		if (found_key.objectid != bytenr)
-			break;
+	ret = 1;
+	item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		WARN_ON(item_size != sizeof(struct btrfs_extent_item_v0));
+		goto out;
+	}
+#endif
+	ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item);
 
-		if (found_key.type != BTRFS_EXTENT_REF_KEY) {
-			path->slots[0]++;
-			continue;
-		}
+	if (item_size != sizeof(*ei) +
+	    btrfs_extent_inline_ref_size(BTRFS_EXTENT_DATA_REF_KEY))
+		goto out;
 
-		ref_item = btrfs_item_ptr(leaf, path->slots[0],
-					  struct btrfs_extent_ref);
-		ref_root = btrfs_ref_root(leaf, ref_item);
-		if ((ref_root != root->root_key.objectid &&
-		     ref_root != BTRFS_TREE_LOG_OBJECTID) ||
-		     objectid != btrfs_ref_objectid(leaf, ref_item)) {
-			ret = 1;
-			goto out;
-		}
-		if (btrfs_ref_generation(leaf, ref_item) <= last_snapshot) {
-			ret = 1;
+	if (btrfs_extent_generation(leaf, ei) <=
+	    btrfs_root_last_snapshot(&root->root_item))
+		goto out;
+
+	iref = (struct btrfs_extent_inline_ref *)(ei + 1);
+	if (btrfs_extent_inline_ref_type(leaf, iref) !=
+	    BTRFS_EXTENT_DATA_REF_KEY)
+		goto out;
+
+	ref = (struct btrfs_extent_data_ref *)(&iref->offset);
+	if (btrfs_extent_refs(leaf, ei) !=
+	    btrfs_extent_data_ref_count(leaf, ref) ||
+	    btrfs_extent_data_ref_root(leaf, ref) !=
+	    root->root_key.objectid ||
+	    btrfs_extent_data_ref_objectid(leaf, ref) != objectid ||
+	    btrfs_extent_data_ref_offset(leaf, ref) != offset)
+		goto out;
+
+	ret = 0;
+out:
+	return ret;
+}
+
+int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root,
+			  u64 objectid, u64 offset, u64 bytenr)
+{
+	struct btrfs_path *path;
+	int ret;
+	int ret2;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOENT;
+
+	do {
+		ret = check_committed_ref(trans, root, path, objectid,
+					  offset, bytenr);
+		if (ret && ret != -ENOENT)
 			goto out;
-		}
 
-		path->slots[0]++;
+		ret2 = check_delayed_ref(trans, root, path, objectid,
+					 offset, bytenr);
+	} while (ret2 == -EAGAIN);
+
+	if (ret2 && ret2 != -ENOENT) {
+		ret = ret2;
+		goto out;
 	}
-	ret = 0;
+
+	if (ret != -ENOENT || ret2 != -ENOENT)
+		ret = 0;
 out:
 	btrfs_free_path(path);
 	return ret;
 }
 
+#if 0
 int btrfs_cache_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		    struct extent_buffer *buf, u32 nr_extents)
 {
@@ -1291,62 +2276,44 @@ static int refsort_cmp(const void *a_void, const void *b_void)
 		return 1;
 	return 0;
 }
+#endif
 
-
-noinline int btrfs_inc_ref(struct btrfs_trans_handle *trans,
+static int __btrfs_mod_ref(struct btrfs_trans_handle *trans,
 			   struct btrfs_root *root,
-			   struct extent_buffer *orig_buf,
-			   struct extent_buffer *buf, u32 *nr_extents)
+			   struct extent_buffer *buf,
+			   int full_backref, int inc)
 {
 	u64 bytenr;
+	u64 num_bytes;
+	u64 parent;
 	u64 ref_root;
-	u64 orig_root;
-	u64 ref_generation;
-	u64 orig_generation;
-	struct refsort *sorted;
 	u32 nritems;
-	u32 nr_file_extents = 0;
 	struct btrfs_key key;
 	struct btrfs_file_extent_item *fi;
 	int i;
 	int level;
 	int ret = 0;
-	int faili = 0;
-	int refi = 0;
-	int slot;
 	int (*process_func)(struct btrfs_trans_handle *, struct btrfs_root *,
-			    u64, u64, u64, u64, u64, u64, u64, u64, u64);
+			    u64, u64, u64, u64, u64, u64);
 
 	ref_root = btrfs_header_owner(buf);
-	ref_generation = btrfs_header_generation(buf);
-	orig_root = btrfs_header_owner(orig_buf);
-	orig_generation = btrfs_header_generation(orig_buf);
-
 	nritems = btrfs_header_nritems(buf);
 	level = btrfs_header_level(buf);
 
-	sorted = kmalloc(sizeof(struct refsort) * nritems, GFP_NOFS);
-	BUG_ON(!sorted);
+	if (!root->ref_cows && level == 0)
+		return 0;
 
-	if (root->ref_cows) {
-		process_func = __btrfs_inc_extent_ref;
-	} else {
-		if (level == 0 &&
-		    root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID)
-			goto out;
-		if (level != 0 &&
-		    root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID)
-			goto out;
-		process_func = __btrfs_update_extent_ref;
-	}
+	if (inc)
+		process_func = btrfs_inc_extent_ref;
+	else
+		process_func = btrfs_free_extent;
+
+	if (full_backref)
+		parent = buf->start;
+	else
+		parent = 0;
 
-	/*
-	 * we make two passes through the items.  In the first pass we
-	 * only record the byte number and slot.  Then we sort based on
-	 * byte number and do the actual work based on the sorted results
-	 */
 	for (i = 0; i < nritems; i++) {
-		cond_resched();
 		if (level == 0) {
 			btrfs_item_key_to_cpu(buf, &key, i);
 			if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
@@ -1360,151 +2327,38 @@ noinline int btrfs_inc_ref(struct btrfs_trans_handle *trans,
 			if (bytenr == 0)
 				continue;
 
-			nr_file_extents++;
-			sorted[refi].bytenr = bytenr;
-			sorted[refi].slot = i;
-			refi++;
-		} else {
-			bytenr = btrfs_node_blockptr(buf, i);
-			sorted[refi].bytenr = bytenr;
-			sorted[refi].slot = i;
-			refi++;
-		}
-	}
-	/*
-	 * if refi == 0, we didn't actually put anything into the sorted
-	 * array and we're done
-	 */
-	if (refi == 0)
-		goto out;
-
-	sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
-
-	for (i = 0; i < refi; i++) {
-		cond_resched();
-		slot = sorted[i].slot;
-		bytenr = sorted[i].bytenr;
-
-		if (level == 0) {
-			btrfs_item_key_to_cpu(buf, &key, slot);
-			fi = btrfs_item_ptr(buf, slot,
-					    struct btrfs_file_extent_item);
-
-			bytenr = btrfs_file_extent_disk_bytenr(buf, fi);
-			if (bytenr == 0)
-				continue;
-
-			ret = process_func(trans, root, bytenr,
-				   btrfs_file_extent_disk_num_bytes(buf, fi),
-				   orig_buf->start, buf->start,
-				   orig_root, ref_root,
-				   orig_generation, ref_generation,
-				   key.objectid);
-
-			if (ret) {
-				faili = slot;
-				WARN_ON(1);
+			num_bytes = btrfs_file_extent_disk_num_bytes(buf, fi);
+			key.offset -= btrfs_file_extent_offset(buf, fi);
+			ret = process_func(trans, root, bytenr, num_bytes,
+					   parent, ref_root, key.objectid,
+					   key.offset);
+			if (ret)
 				goto fail;
-			}
 		} else {
-			ret = process_func(trans, root, bytenr, buf->len,
-					   orig_buf->start, buf->start,
-					   orig_root, ref_root,
-					   orig_generation, ref_generation,
-					   level - 1);
-			if (ret) {
-				faili = slot;
-				WARN_ON(1);
+			bytenr = btrfs_node_blockptr(buf, i);
+			num_bytes = btrfs_level_size(root, level - 1);
+			ret = process_func(trans, root, bytenr, num_bytes,
+					   parent, ref_root, level - 1, 0);
+			if (ret)
 				goto fail;
-			}
 		}
 	}
-out:
-	kfree(sorted);
-	if (nr_extents) {
-		if (level == 0)
-			*nr_extents = nr_file_extents;
-		else
-			*nr_extents = nritems;
-	}
 	return 0;
 fail:
-	kfree(sorted);
-	WARN_ON(1);
+	BUG();
 	return ret;
 }
 
-int btrfs_update_ref(struct btrfs_trans_handle *trans,
-		     struct btrfs_root *root, struct extent_buffer *orig_buf,
-		     struct extent_buffer *buf, int start_slot, int nr)
-
+int btrfs_inc_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+		  struct extent_buffer *buf, int full_backref)
 {
-	u64 bytenr;
-	u64 ref_root;
-	u64 orig_root;
-	u64 ref_generation;
-	u64 orig_generation;
-	struct btrfs_key key;
-	struct btrfs_file_extent_item *fi;
-	int i;
-	int ret;
-	int slot;
-	int level;
-
-	BUG_ON(start_slot < 0);
-	BUG_ON(start_slot + nr > btrfs_header_nritems(buf));
-
-	ref_root = btrfs_header_owner(buf);
-	ref_generation = btrfs_header_generation(buf);
-	orig_root = btrfs_header_owner(orig_buf);
-	orig_generation = btrfs_header_generation(orig_buf);
-	level = btrfs_header_level(buf);
-
-	if (!root->ref_cows) {
-		if (level == 0 &&
-		    root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID)
-			return 0;
-		if (level != 0 &&
-		    root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID)
-			return 0;
-	}
+	return __btrfs_mod_ref(trans, root, buf, full_backref, 1);
+}
 
-	for (i = 0, slot = start_slot; i < nr; i++, slot++) {
-		cond_resched();
-		if (level == 0) {
-			btrfs_item_key_to_cpu(buf, &key, slot);
-			if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
-				continue;
-			fi = btrfs_item_ptr(buf, slot,
-					    struct btrfs_file_extent_item);
-			if (btrfs_file_extent_type(buf, fi) ==
-			    BTRFS_FILE_EXTENT_INLINE)
-				continue;
-			bytenr = btrfs_file_extent_disk_bytenr(buf, fi);
-			if (bytenr == 0)
-				continue;
-			ret = __btrfs_update_extent_ref(trans, root, bytenr,
-				    btrfs_file_extent_disk_num_bytes(buf, fi),
-				    orig_buf->start, buf->start,
-				    orig_root, ref_root, orig_generation,
-				    ref_generation, key.objectid);
-			if (ret)
-				goto fail;
-		} else {
-			bytenr = btrfs_node_blockptr(buf, slot);
-			ret = __btrfs_update_extent_ref(trans, root, bytenr,
-					    buf->len, orig_buf->start,
-					    buf->start, orig_root, ref_root,
-					    orig_generation, ref_generation,
-					    level - 1);
-			if (ret)
-				goto fail;
-		}
-	}
-	return 0;
-fail:
-	WARN_ON(1);
-	return -1;
+int btrfs_dec_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root,
+		  struct extent_buffer *buf, int full_backref)
+{
+	return __btrfs_mod_ref(trans, root, buf, full_backref, 0);
 }
 
 static int write_one_cache_group(struct btrfs_trans_handle *trans,
@@ -2007,6 +2861,24 @@ static int update_block_group(struct btrfs_trans_handle *trans,
 	u64 old_val;
 	u64 byte_in_group;
 
+	/* block accounting for super block */
+	spin_lock(&info->delalloc_lock);
+	old_val = btrfs_super_bytes_used(&info->super_copy);
+	if (alloc)
+		old_val += num_bytes;
+	else
+		old_val -= num_bytes;
+	btrfs_set_super_bytes_used(&info->super_copy, old_val);
+
+	/* block accounting for root item */
+	old_val = btrfs_root_used(&root->root_item);
+	if (alloc)
+		old_val += num_bytes;
+	else
+		old_val -= num_bytes;
+	btrfs_set_root_used(&root->root_item, old_val);
+	spin_unlock(&info->delalloc_lock);
+
 	while (total) {
 		cache = btrfs_lookup_block_group(info, bytenr);
 		if (!cache)
@@ -2216,8 +3088,6 @@ static int pin_down_bytes(struct btrfs_trans_handle *trans,
 		u64 header_owner = btrfs_header_owner(buf);
 		u64 header_transid = btrfs_header_generation(buf);
 		if (header_owner != BTRFS_TREE_LOG_OBJECTID &&
-		    header_owner != BTRFS_TREE_RELOC_OBJECTID &&
-		    header_owner != BTRFS_DATA_RELOC_TREE_OBJECTID &&
 		    header_transid == trans->transid &&
 		    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
 			*must_clean = buf;
@@ -2235,63 +3105,77 @@ pinit:
 	return 0;
 }
 
-/*
- * remove an extent from the root, returns 0 on success
- */
-static int __free_extent(struct btrfs_trans_handle *trans,
-			 struct btrfs_root *root,
-			 u64 bytenr, u64 num_bytes, u64 parent,
-			 u64 root_objectid, u64 ref_generation,
-			 u64 owner_objectid, int pin, int mark_free,
-			 int refs_to_drop)
+
+static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root,
+				u64 bytenr, u64 num_bytes, u64 parent,
+				u64 root_objectid, u64 owner_objectid,
+				u64 owner_offset, int refs_to_drop,
+				struct btrfs_delayed_extent_op *extent_op)
 {
-	struct btrfs_path *path;
 	struct btrfs_key key;
+	struct btrfs_path *path;
 	struct btrfs_fs_info *info = root->fs_info;
 	struct btrfs_root *extent_root = info->extent_root;
 	struct extent_buffer *leaf;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *iref;
 	int ret;
+	int is_data;
 	int extent_slot = 0;
 	int found_extent = 0;
 	int num_to_del = 1;
-	struct btrfs_extent_item *ei;
-	u32 refs;
+	u32 item_size;
+	u64 refs;
 
-	key.objectid = bytenr;
-	btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
-	key.offset = num_bytes;
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
 
 	path->reada = 1;
 	path->leave_spinning = 1;
-	ret = lookup_extent_backref(trans, extent_root, path,
-				    bytenr, parent, root_objectid,
-				    ref_generation, owner_objectid, 1);
+
+	is_data = owner_objectid >= BTRFS_FIRST_FREE_OBJECTID;
+	BUG_ON(!is_data && refs_to_drop != 1);
+
+	ret = lookup_extent_backref(trans, extent_root, path, &iref,
+				    bytenr, num_bytes, parent,
+				    root_objectid, owner_objectid,
+				    owner_offset);
 	if (ret == 0) {
-		struct btrfs_key found_key;
 		extent_slot = path->slots[0];
-		while (extent_slot > 0) {
-			extent_slot--;
-			btrfs_item_key_to_cpu(path->nodes[0], &found_key,
+		while (extent_slot >= 0) {
+			btrfs_item_key_to_cpu(path->nodes[0], &key,
 					      extent_slot);
-			if (found_key.objectid != bytenr)
+			if (key.objectid != bytenr)
 				break;
-			if (found_key.type == BTRFS_EXTENT_ITEM_KEY &&
-			    found_key.offset == num_bytes) {
+			if (key.type == BTRFS_EXTENT_ITEM_KEY &&
+			    key.offset == num_bytes) {
 				found_extent = 1;
 				break;
 			}
 			if (path->slots[0] - extent_slot > 5)
 				break;
+			extent_slot--;
 		}
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		item_size = btrfs_item_size_nr(path->nodes[0], extent_slot);
+		if (found_extent && item_size < sizeof(*ei))
+			found_extent = 0;
+#endif
 		if (!found_extent) {
+			BUG_ON(iref);
 			ret = remove_extent_backref(trans, extent_root, path,
-						    refs_to_drop);
+						    NULL, refs_to_drop,
+						    is_data);
 			BUG_ON(ret);
 			btrfs_release_path(extent_root, path);
 			path->leave_spinning = 1;
+
+			key.objectid = bytenr;
+			key.type = BTRFS_EXTENT_ITEM_KEY;
+			key.offset = num_bytes;
+
 			ret = btrfs_search_slot(trans, extent_root,
 						&key, path, -1, 1);
 			if (ret) {
@@ -2307,82 +3191,98 @@ static int __free_extent(struct btrfs_trans_handle *trans,
 		btrfs_print_leaf(extent_root, path->nodes[0]);
 		WARN_ON(1);
 		printk(KERN_ERR "btrfs unable to find ref byte nr %llu "
-		       "parent %llu root %llu gen %llu owner %llu\n",
+		       "parent %llu root %llu  owner %llu offset %llu\n",
 		       (unsigned long long)bytenr,
 		       (unsigned long long)parent,
 		       (unsigned long long)root_objectid,
-		       (unsigned long long)ref_generation,
-		       (unsigned long long)owner_objectid);
+		       (unsigned long long)owner_objectid,
+		       (unsigned long long)owner_offset);
 	}
 
 	leaf = path->nodes[0];
+	item_size = btrfs_item_size_nr(leaf, extent_slot);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		BUG_ON(found_extent || extent_slot != path->slots[0]);
+		ret = convert_extent_item_v0(trans, extent_root, path,
+					     owner_objectid, 0);
+		BUG_ON(ret < 0);
+
+		btrfs_release_path(extent_root, path);
+		path->leave_spinning = 1;
+
+		key.objectid = bytenr;
+		key.type = BTRFS_EXTENT_ITEM_KEY;
+		key.offset = num_bytes;
+
+		ret = btrfs_search_slot(trans, extent_root, &key, path,
+					-1, 1);
+		if (ret) {
+			printk(KERN_ERR "umm, got %d back from search"
+			       ", was looking for %llu\n", ret,
+			       (unsigned long long)bytenr);
+			btrfs_print_leaf(extent_root, path->nodes[0]);
+		}
+		BUG_ON(ret);
+		extent_slot = path->slots[0];
+		leaf = path->nodes[0];
+		item_size = btrfs_item_size_nr(leaf, extent_slot);
+	}
+#endif
+	BUG_ON(item_size < sizeof(*ei));
 	ei = btrfs_item_ptr(leaf, extent_slot,
 			    struct btrfs_extent_item);
-	refs = btrfs_extent_refs(leaf, ei);
-
-	/*
-	 * we're not allowed to delete the extent item if there
-	 * are other delayed ref updates pending
-	 */
+	if (owner_objectid < BTRFS_FIRST_FREE_OBJECTID) {
+		struct btrfs_tree_block_info *bi;
+		BUG_ON(item_size < sizeof(*ei) + sizeof(*bi));
+		bi = (struct btrfs_tree_block_info *)(ei + 1);
+		WARN_ON(owner_objectid != btrfs_tree_block_level(leaf, bi));
+	}
 
+	refs = btrfs_extent_refs(leaf, ei);
 	BUG_ON(refs < refs_to_drop);
 	refs -= refs_to_drop;
-	btrfs_set_extent_refs(leaf, ei, refs);
-	btrfs_mark_buffer_dirty(leaf);
 
-	if (refs == 0 && found_extent &&
-	    path->slots[0] == extent_slot + 1) {
-		struct btrfs_extent_ref *ref;
-		ref = btrfs_item_ptr(leaf, path->slots[0],
-				     struct btrfs_extent_ref);
-		BUG_ON(btrfs_ref_num_refs(leaf, ref) != refs_to_drop);
-		/* if the back ref and the extent are next to each other
-		 * they get deleted below in one shot
+	if (refs > 0) {
+		if (extent_op)
+			__run_delayed_extent_op(extent_op, leaf, ei);
+		/*
+		 * In the case of inline back ref, reference count will
+		 * be updated by remove_extent_backref
 		 */
-		path->slots[0] = extent_slot;
-		num_to_del = 2;
-	} else if (found_extent) {
-		/* otherwise delete the extent back ref */
-		ret = remove_extent_backref(trans, extent_root, path,
-					    refs_to_drop);
-		BUG_ON(ret);
-		/* if refs are 0, we need to setup the path for deletion */
-		if (refs == 0) {
-			btrfs_release_path(extent_root, path);
-			path->leave_spinning = 1;
-			ret = btrfs_search_slot(trans, extent_root, &key, path,
-						-1, 1);
+		if (iref) {
+			BUG_ON(!found_extent);
+		} else {
+			btrfs_set_extent_refs(leaf, ei, refs);
+			btrfs_mark_buffer_dirty(leaf);
+		}
+		if (found_extent) {
+			ret = remove_extent_backref(trans, extent_root, path,
+						    iref, refs_to_drop,
+						    is_data);
 			BUG_ON(ret);
 		}
-	}
-
-	if (refs == 0) {
-		u64 super_used;
-		u64 root_used;
+	} else {
+		int mark_free = 0;
 		struct extent_buffer *must_clean = NULL;
 
-		if (pin) {
-			ret = pin_down_bytes(trans, root, path,
-				bytenr, num_bytes,
-				owner_objectid >= BTRFS_FIRST_FREE_OBJECTID,
-				&must_clean);
-			if (ret > 0)
-				mark_free = 1;
-			BUG_ON(ret < 0);
+		if (found_extent) {
+			BUG_ON(is_data && refs_to_drop !=
+			       extent_data_ref_count(root, path, iref));
+			if (iref) {
+				BUG_ON(path->slots[0] != extent_slot);
+			} else {
+				BUG_ON(path->slots[0] != extent_slot + 1);
+				path->slots[0] = extent_slot;
+				num_to_del = 2;
+			}
 		}
 
-		/* block accounting for super block */
-		spin_lock(&info->delalloc_lock);
-		super_used = btrfs_super_bytes_used(&info->super_copy);
-		btrfs_set_super_bytes_used(&info->super_copy,
-					   super_used - num_bytes);
-
-		/* block accounting for root item */
-		root_used = btrfs_root_used(&root->root_item);
-		btrfs_set_root_used(&root->root_item,
-					   root_used - num_bytes);
-		spin_unlock(&info->delalloc_lock);
-
+		ret = pin_down_bytes(trans, root, path, bytenr,
+				     num_bytes, is_data, &must_clean);
+		if (ret > 0)
+			mark_free = 1;
+		BUG_ON(ret < 0);
 		/*
 		 * it is going to be very rare for someone to be waiting
 		 * on the block we're freeing.  del_items might need to
@@ -2403,7 +3303,7 @@ static int __free_extent(struct btrfs_trans_handle *trans,
 			free_extent_buffer(must_clean);
 		}
 
-		if (owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) {
+		if (is_data) {
 			ret = btrfs_del_csums(trans, root, bytenr, num_bytes);
 			BUG_ON(ret);
 		} else {
@@ -2421,34 +3321,6 @@ static int __free_extent(struct btrfs_trans_handle *trans,
 }
 
 /*
- * remove an extent from the root, returns 0 on success
- */
-static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
-					struct btrfs_root *root,
-					u64 bytenr, u64 num_bytes, u64 parent,
-					u64 root_objectid, u64 ref_generation,
-					u64 owner_objectid, int pin,
-					int refs_to_drop)
-{
-	WARN_ON(num_bytes < root->sectorsize);
-
-	/*
-	 * if metadata always pin
-	 * if data pin when any transaction has committed this
-	 */
-	if (owner_objectid < BTRFS_FIRST_FREE_OBJECTID ||
-	    ref_generation != trans->transid)
-		pin = 1;
-
-	if (ref_generation != trans->transid)
-		pin = 1;
-
-	return __free_extent(trans, root, bytenr, num_bytes, parent,
-			    root_objectid, ref_generation,
-			    owner_objectid, pin, pin == 0, refs_to_drop);
-}
-
-/*
  * when we free an extent, it is possible (and likely) that we free the last
  * delayed ref for that extent as well.  This searches the delayed ref tree for
  * a given extent, and if there are no other delayed refs to be processed, it
@@ -2479,6 +3351,13 @@ static noinline int check_ref_cleanup(struct btrfs_trans_handle *trans,
 	if (ref->bytenr == bytenr)
 		goto out;
 
+	if (head->extent_op) {
+		if (!head->must_insert_reserved)
+			goto out;
+		kfree(head->extent_op);
+		head->extent_op = NULL;
+	}
+
 	/*
 	 * waiting for the lock here would deadlock.  If someone else has it
 	 * locked they are already in the process of dropping it anyway
@@ -2507,7 +3386,8 @@ static noinline int check_ref_cleanup(struct btrfs_trans_handle *trans,
 	spin_unlock(&delayed_refs->lock);
 
 	ret = run_one_delayed_ref(trans, root->fs_info->tree_root,
-				  &head->node, head->must_insert_reserved);
+				  &head->node, head->extent_op,
+				  head->must_insert_reserved);
 	BUG_ON(ret);
 	btrfs_put_delayed_ref(&head->node);
 	return 0;
@@ -2519,32 +3399,32 @@ out:
 int btrfs_free_extent(struct btrfs_trans_handle *trans,
 		      struct btrfs_root *root,
 		      u64 bytenr, u64 num_bytes, u64 parent,
-		      u64 root_objectid, u64 ref_generation,
-		      u64 owner_objectid, int pin)
+		      u64 root_objectid, u64 owner, u64 offset)
 {
 	int ret;
 
 	/*
 	 * tree log blocks never actually go into the extent allocation
 	 * tree, just update pinning info and exit early.
-	 *
-	 * data extents referenced by the tree log do need to have
-	 * their reference counts bumped.
 	 */
-	if (root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID &&
-	    owner_objectid < BTRFS_FIRST_FREE_OBJECTID) {
+	if (root_objectid == BTRFS_TREE_LOG_OBJECTID) {
+		WARN_ON(owner >= BTRFS_FIRST_FREE_OBJECTID);
 		/* unlocks the pinned mutex */
 		btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
 		update_reserved_extents(root, bytenr, num_bytes, 0);
 		ret = 0;
-	} else {
-		ret = btrfs_add_delayed_ref(trans, bytenr, num_bytes, parent,
-				       root_objectid, ref_generation,
-				       owner_objectid,
-				       BTRFS_DROP_DELAYED_REF, 1);
+	} else if (owner < BTRFS_FIRST_FREE_OBJECTID) {
+		ret = btrfs_add_delayed_tree_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, (int)owner,
+					BTRFS_DROP_DELAYED_REF, NULL);
 		BUG_ON(ret);
 		ret = check_ref_cleanup(trans, root, bytenr);
 		BUG_ON(ret);
+	} else {
+		ret = btrfs_add_delayed_data_ref(trans, bytenr, num_bytes,
+					parent, root_objectid, owner,
+					offset, BTRFS_DROP_DELAYED_REF, NULL);
+		BUG_ON(ret);
 	}
 	return ret;
 }
@@ -2622,7 +3502,18 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
 						       search_start);
 		if (block_group && block_group_bits(block_group, data)) {
 			down_read(&space_info->groups_sem);
-			goto have_block_group;
+			if (list_empty(&block_group->list) ||
+			    block_group->ro) {
+				/*
+				 * someone is removing this block group,
+				 * we can't jump into the have_block_group
+				 * target because our list pointers are not
+				 * valid
+				 */
+				btrfs_put_block_group(block_group);
+				up_read(&space_info->groups_sem);
+			} else
+				goto have_block_group;
 		} else if (block_group) {
 			btrfs_put_block_group(block_group);
 		}
@@ -2656,6 +3547,13 @@ have_block_group:
 			 * people trying to start a new cluster
 			 */
 			spin_lock(&last_ptr->refill_lock);
+			if (last_ptr->block_group &&
+			    (last_ptr->block_group->ro ||
+			    !block_group_bits(last_ptr->block_group, data))) {
+				offset = 0;
+				goto refill_cluster;
+			}
+
 			offset = btrfs_alloc_from_cluster(block_group, last_ptr,
 						 num_bytes, search_start);
 			if (offset) {
@@ -2681,10 +3579,17 @@ have_block_group:
 
 				last_ptr_loop = 1;
 				search_start = block_group->key.objectid;
+				/*
+				 * we know this block group is properly
+				 * in the list because
+				 * btrfs_remove_block_group, drops the
+				 * cluster before it removes the block
+				 * group from the list
+				 */
 				goto have_block_group;
 			}
 			spin_unlock(&last_ptr->lock);
-
+refill_cluster:
 			/*
 			 * this cluster didn't work out, free it and
 			 * start over
@@ -2694,7 +3599,7 @@ have_block_group:
 			last_ptr_loop = 0;
 
 			/* allocate a cluster in this block group */
-			ret = btrfs_find_space_cluster(trans,
+			ret = btrfs_find_space_cluster(trans, root,
 					       block_group, last_ptr,
 					       offset, num_bytes,
 					       empty_cluster + empty_size);
@@ -2944,99 +3849,147 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
-static int __btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-					 struct btrfs_root *root, u64 parent,
-					 u64 root_objectid, u64 ref_generation,
-					 u64 owner, struct btrfs_key *ins,
-					 int ref_mod)
+static int alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *root,
+				      u64 parent, u64 root_objectid,
+				      u64 flags, u64 owner, u64 offset,
+				      struct btrfs_key *ins, int ref_mod)
 {
 	int ret;
-	u64 super_used;
-	u64 root_used;
-	u64 num_bytes = ins->offset;
-	u32 sizes[2];
-	struct btrfs_fs_info *info = root->fs_info;
-	struct btrfs_root *extent_root = info->extent_root;
+	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct btrfs_extent_item *extent_item;
-	struct btrfs_extent_ref *ref;
+	struct btrfs_extent_inline_ref *iref;
 	struct btrfs_path *path;
-	struct btrfs_key keys[2];
-
-	if (parent == 0)
-		parent = ins->objectid;
-
-	/* block accounting for super block */
-	spin_lock(&info->delalloc_lock);
-	super_used = btrfs_super_bytes_used(&info->super_copy);
-	btrfs_set_super_bytes_used(&info->super_copy, super_used + num_bytes);
+	struct extent_buffer *leaf;
+	int type;
+	u32 size;
 
-	/* block accounting for root item */
-	root_used = btrfs_root_used(&root->root_item);
-	btrfs_set_root_used(&root->root_item, root_used + num_bytes);
-	spin_unlock(&info->delalloc_lock);
+	if (parent > 0)
+		type = BTRFS_SHARED_DATA_REF_KEY;
+	else
+		type = BTRFS_EXTENT_DATA_REF_KEY;
 
-	memcpy(&keys[0], ins, sizeof(*ins));
-	keys[1].objectid = ins->objectid;
-	keys[1].type = BTRFS_EXTENT_REF_KEY;
-	keys[1].offset = parent;
-	sizes[0] = sizeof(*extent_item);
-	sizes[1] = sizeof(*ref);
+	size = sizeof(*extent_item) + btrfs_extent_inline_ref_size(type);
 
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
 	path->leave_spinning = 1;
-	ret = btrfs_insert_empty_items(trans, extent_root, path, keys,
-				       sizes, 2);
+	ret = btrfs_insert_empty_item(trans, fs_info->extent_root, path,
+				      ins, size);
 	BUG_ON(ret);
 
-	extent_item = btrfs_item_ptr(path->nodes[0], path->slots[0],
+	leaf = path->nodes[0];
+	extent_item = btrfs_item_ptr(leaf, path->slots[0],
 				     struct btrfs_extent_item);
-	btrfs_set_extent_refs(path->nodes[0], extent_item, ref_mod);
-	ref = btrfs_item_ptr(path->nodes[0], path->slots[0] + 1,
-			     struct btrfs_extent_ref);
-
-	btrfs_set_ref_root(path->nodes[0], ref, root_objectid);
-	btrfs_set_ref_generation(path->nodes[0], ref, ref_generation);
-	btrfs_set_ref_objectid(path->nodes[0], ref, owner);
-	btrfs_set_ref_num_refs(path->nodes[0], ref, ref_mod);
+	btrfs_set_extent_refs(leaf, extent_item, ref_mod);
+	btrfs_set_extent_generation(leaf, extent_item, trans->transid);
+	btrfs_set_extent_flags(leaf, extent_item,
+			       flags | BTRFS_EXTENT_FLAG_DATA);
+
+	iref = (struct btrfs_extent_inline_ref *)(extent_item + 1);
+	btrfs_set_extent_inline_ref_type(leaf, iref, type);
+	if (parent > 0) {
+		struct btrfs_shared_data_ref *ref;
+		ref = (struct btrfs_shared_data_ref *)(iref + 1);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+		btrfs_set_shared_data_ref_count(leaf, ref, ref_mod);
+	} else {
+		struct btrfs_extent_data_ref *ref;
+		ref = (struct btrfs_extent_data_ref *)(&iref->offset);
+		btrfs_set_extent_data_ref_root(leaf, ref, root_objectid);
+		btrfs_set_extent_data_ref_objectid(leaf, ref, owner);
+		btrfs_set_extent_data_ref_offset(leaf, ref, offset);
+		btrfs_set_extent_data_ref_count(leaf, ref, ref_mod);
+	}
 
 	btrfs_mark_buffer_dirty(path->nodes[0]);
-
-	trans->alloc_exclude_start = 0;
-	trans->alloc_exclude_nr = 0;
 	btrfs_free_path(path);
 
-	if (ret)
-		goto out;
-
-	ret = update_block_group(trans, root, ins->objectid,
-				 ins->offset, 1, 0);
+	ret = update_block_group(trans, root, ins->objectid, ins->offset,
+				 1, 0);
 	if (ret) {
 		printk(KERN_ERR "btrfs update block group failed for %llu "
 		       "%llu\n", (unsigned long long)ins->objectid,
 		       (unsigned long long)ins->offset);
 		BUG();
 	}
-out:
 	return ret;
 }
 
-int btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins)
+static int alloc_reserved_tree_block(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 parent, u64 root_objectid,
+				     u64 flags, struct btrfs_disk_key *key,
+				     int level, struct btrfs_key *ins)
 {
 	int ret;
+	struct btrfs_fs_info *fs_info = root->fs_info;
+	struct btrfs_extent_item *extent_item;
+	struct btrfs_tree_block_info *block_info;
+	struct btrfs_extent_inline_ref *iref;
+	struct btrfs_path *path;
+	struct extent_buffer *leaf;
+	u32 size = sizeof(*extent_item) + sizeof(*block_info) + sizeof(*iref);
 
-	if (root_objectid == BTRFS_TREE_LOG_OBJECTID)
-		return 0;
+	path = btrfs_alloc_path();
+	BUG_ON(!path);
 
-	ret = btrfs_add_delayed_ref(trans, ins->objectid,
-				    ins->offset, parent, root_objectid,
-				    ref_generation, owner,
-				    BTRFS_ADD_DELAYED_EXTENT, 0);
+	path->leave_spinning = 1;
+	ret = btrfs_insert_empty_item(trans, fs_info->extent_root, path,
+				      ins, size);
 	BUG_ON(ret);
+
+	leaf = path->nodes[0];
+	extent_item = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_extent_item);
+	btrfs_set_extent_refs(leaf, extent_item, 1);
+	btrfs_set_extent_generation(leaf, extent_item, trans->transid);
+	btrfs_set_extent_flags(leaf, extent_item,
+			       flags | BTRFS_EXTENT_FLAG_TREE_BLOCK);
+	block_info = (struct btrfs_tree_block_info *)(extent_item + 1);
+
+	btrfs_set_tree_block_key(leaf, block_info, key);
+	btrfs_set_tree_block_level(leaf, block_info, level);
+
+	iref = (struct btrfs_extent_inline_ref *)(block_info + 1);
+	if (parent > 0) {
+		BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+		btrfs_set_extent_inline_ref_type(leaf, iref,
+						 BTRFS_SHARED_BLOCK_REF_KEY);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, parent);
+	} else {
+		btrfs_set_extent_inline_ref_type(leaf, iref,
+						 BTRFS_TREE_BLOCK_REF_KEY);
+		btrfs_set_extent_inline_ref_offset(leaf, iref, root_objectid);
+	}
+
+	btrfs_mark_buffer_dirty(leaf);
+	btrfs_free_path(path);
+
+	ret = update_block_group(trans, root, ins->objectid, ins->offset,
+				 1, 0);
+	if (ret) {
+		printk(KERN_ERR "btrfs update block group failed for %llu "
+		       "%llu\n", (unsigned long long)ins->objectid,
+		       (unsigned long long)ins->offset);
+		BUG();
+	}
+	return ret;
+}
+
+int btrfs_alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
+				     struct btrfs_root *root,
+				     u64 root_objectid, u64 owner,
+				     u64 offset, struct btrfs_key *ins)
+{
+	int ret;
+
+	BUG_ON(root_objectid == BTRFS_TREE_LOG_OBJECTID);
+
+	ret = btrfs_add_delayed_data_ref(trans, ins->objectid, ins->offset,
+					 0, root_objectid, owner, offset,
+					 BTRFS_ADD_DELAYED_EXTENT, NULL);
 	return ret;
 }
 
@@ -3045,10 +3998,10 @@ int btrfs_alloc_reserved_extent(struct btrfs_trans_handle *trans,
  * an extent has been allocated and makes sure to clear the free
  * space cache bits as well
  */
-int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root, u64 parent,
-				u64 root_objectid, u64 ref_generation,
-				u64 owner, struct btrfs_key *ins)
+int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   u64 root_objectid, u64 owner, u64 offset,
+				   struct btrfs_key *ins)
 {
 	int ret;
 	struct btrfs_block_group_cache *block_group;
@@ -3062,8 +4015,8 @@ int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
 				      ins->offset);
 	BUG_ON(ret);
 	btrfs_put_block_group(block_group);
-	ret = __btrfs_alloc_reserved_extent(trans, root, parent, root_objectid,
-					    ref_generation, owner, ins, 1);
+	ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
+					 0, owner, offset, ins, 1);
 	return ret;
 }
 
@@ -3074,26 +4027,48 @@ int btrfs_alloc_logged_extent(struct btrfs_trans_handle *trans,
  *
  * returns 0 if everything worked, non-zero otherwise.
  */
-int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
-		       struct btrfs_root *root,
-		       u64 num_bytes, u64 parent, u64 min_alloc_size,
-		       u64 root_objectid, u64 ref_generation,
-		       u64 owner_objectid, u64 empty_size, u64 hint_byte,
-		       u64 search_end, struct btrfs_key *ins, u64 data)
+static int alloc_tree_block(struct btrfs_trans_handle *trans,
+			    struct btrfs_root *root,
+			    u64 num_bytes, u64 parent, u64 root_objectid,
+			    struct btrfs_disk_key *key, int level,
+			    u64 empty_size, u64 hint_byte, u64 search_end,
+			    struct btrfs_key *ins)
 {
 	int ret;
-	ret = __btrfs_reserve_extent(trans, root, num_bytes,
-				     min_alloc_size, empty_size, hint_byte,
-				     search_end, ins, data);
+	u64 flags = 0;
+
+	ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
+				     empty_size, hint_byte, search_end,
+				     ins, 0);
 	BUG_ON(ret);
+
+	if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
+		if (parent == 0)
+			parent = ins->objectid;
+		flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
+	} else
+		BUG_ON(parent > 0);
+
+	update_reserved_extents(root, ins->objectid, ins->offset, 1);
 	if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
-		ret = btrfs_add_delayed_ref(trans, ins->objectid,
-					    ins->offset, parent, root_objectid,
-					    ref_generation, owner_objectid,
-					    BTRFS_ADD_DELAYED_EXTENT, 0);
+		struct btrfs_delayed_extent_op *extent_op;
+		extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
+		BUG_ON(!extent_op);
+		if (key)
+			memcpy(&extent_op->key, key, sizeof(extent_op->key));
+		else
+			memset(&extent_op->key, 0, sizeof(extent_op->key));
+		extent_op->flags_to_set = flags;
+		extent_op->update_key = 1;
+		extent_op->update_flags = 1;
+		extent_op->is_data = 0;
+
+		ret = btrfs_add_delayed_tree_ref(trans, ins->objectid,
+					ins->offset, parent, root_objectid,
+					level, BTRFS_ADD_DELAYED_EXTENT,
+					extent_op);
 		BUG_ON(ret);
 	}
-	update_reserved_extents(root, ins->objectid, ins->offset, 1);
 	return ret;
 }
 
@@ -3132,21 +4107,17 @@ struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
  * returns the tree buffer or NULL.
  */
 struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
-					     struct btrfs_root *root,
-					     u32 blocksize, u64 parent,
-					     u64 root_objectid,
-					     u64 ref_generation,
-					     int level,
-					     u64 hint,
-					     u64 empty_size)
+					struct btrfs_root *root, u32 blocksize,
+					u64 parent, u64 root_objectid,
+					struct btrfs_disk_key *key, int level,
+					u64 hint, u64 empty_size)
 {
 	struct btrfs_key ins;
 	int ret;
 	struct extent_buffer *buf;
 
-	ret = btrfs_alloc_extent(trans, root, blocksize, parent, blocksize,
-				 root_objectid, ref_generation, level,
-				 empty_size, hint, (u64)-1, &ins, 0);
+	ret = alloc_tree_block(trans, root, blocksize, parent, root_objectid,
+			       key, level, empty_size, hint, (u64)-1, &ins);
 	if (ret) {
 		BUG_ON(ret > 0);
 		return ERR_PTR(ret);
@@ -3160,32 +4131,19 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root, struct extent_buffer *leaf)
 {
-	u64 leaf_owner;
-	u64 leaf_generation;
-	struct refsort *sorted;
+	u64 disk_bytenr;
+	u64 num_bytes;
 	struct btrfs_key key;
 	struct btrfs_file_extent_item *fi;
+	u32 nritems;
 	int i;
-	int nritems;
 	int ret;
-	int refi = 0;
-	int slot;
 
 	BUG_ON(!btrfs_is_leaf(leaf));
 	nritems = btrfs_header_nritems(leaf);
-	leaf_owner = btrfs_header_owner(leaf);
-	leaf_generation = btrfs_header_generation(leaf);
 
-	sorted = kmalloc(sizeof(*sorted) * nritems, GFP_NOFS);
-	/* we do this loop twice.  The first time we build a list
-	 * of the extents we have a reference on, then we sort the list
-	 * by bytenr.  The second time around we actually do the
-	 * extent freeing.
-	 */
 	for (i = 0; i < nritems; i++) {
-		u64 disk_bytenr;
 		cond_resched();
-
 		btrfs_item_key_to_cpu(leaf, &key, i);
 
 		/* only extents have references, skip everything else */
@@ -3205,45 +4163,16 @@ int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 		if (disk_bytenr == 0)
 			continue;
 
-		sorted[refi].bytenr = disk_bytenr;
-		sorted[refi].slot = i;
-		refi++;
-	}
-
-	if (refi == 0)
-		goto out;
-
-	sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
-
-	for (i = 0; i < refi; i++) {
-		u64 disk_bytenr;
-
-		disk_bytenr = sorted[i].bytenr;
-		slot = sorted[i].slot;
-
-		cond_resched();
-
-		btrfs_item_key_to_cpu(leaf, &key, slot);
-		if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
-			continue;
-
-		fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
-
-		ret = btrfs_free_extent(trans, root, disk_bytenr,
-				btrfs_file_extent_disk_num_bytes(leaf, fi),
-				leaf->start, leaf_owner, leaf_generation,
-				key.objectid, 0);
+		num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
+		ret = btrfs_free_extent(trans, root, disk_bytenr, num_bytes,
+					leaf->start, 0, key.objectid, 0);
 		BUG_ON(ret);
-
-		atomic_inc(&root->fs_info->throttle_gen);
-		wake_up(&root->fs_info->transaction_throttle);
-		cond_resched();
 	}
-out:
-	kfree(sorted);
 	return 0;
 }
 
+#if 0
+
 static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
 					struct btrfs_root *root,
 					struct btrfs_leaf_ref *ref)
@@ -3286,13 +4215,14 @@ static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
+
 static int drop_snap_lookup_refcount(struct btrfs_trans_handle *trans,
 				     struct btrfs_root *root, u64 start,
 				     u64 len, u32 *refs)
 {
 	int ret;
 
-	ret = btrfs_lookup_extent_ref(trans, root, start, len, refs);
+	ret = btrfs_lookup_extent_refs(trans, root, start, len, refs);
 	BUG_ON(ret);
 
 #if 0 /* some debugging code in case we see problems here */
@@ -3327,6 +4257,7 @@ static int drop_snap_lookup_refcount(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
+
 /*
  * this is used while deleting old snapshots, and it drops the refs
  * on a whole subtree starting from a level 1 node.
@@ -3620,32 +4551,36 @@ out:
 	cond_resched();
 	return 0;
 }
+#endif
 
 /*
  * helper function for drop_subtree, this function is similar to
  * walk_down_tree. The main difference is that it checks reference
  * counts while tree blocks are locked.
  */
-static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
-				      struct btrfs_root *root,
-				      struct btrfs_path *path, int *level)
+static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct btrfs_path *path, int *level)
 {
 	struct extent_buffer *next;
 	struct extent_buffer *cur;
 	struct extent_buffer *parent;
 	u64 bytenr;
 	u64 ptr_gen;
+	u64 refs;
+	u64 flags;
 	u32 blocksize;
-	u32 refs;
 	int ret;
 
 	cur = path->nodes[*level];
-	ret = btrfs_lookup_extent_ref(trans, root, cur->start, cur->len,
-				      &refs);
+	ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len,
+				       &refs, &flags);
 	BUG_ON(ret);
 	if (refs > 1)
 		goto out;
 
+	BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+
 	while (*level >= 0) {
 		cur = path->nodes[*level];
 		if (*level == 0) {
@@ -3667,16 +4602,15 @@ static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
 		btrfs_tree_lock(next);
 		btrfs_set_lock_blocking(next);
 
-		ret = btrfs_lookup_extent_ref(trans, root, bytenr, blocksize,
-					      &refs);
+		ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+					       &refs, &flags);
 		BUG_ON(ret);
 		if (refs > 1) {
 			parent = path->nodes[*level];
 			ret = btrfs_free_extent(trans, root, bytenr,
-					blocksize, parent->start,
-					btrfs_header_owner(parent),
-					btrfs_header_generation(parent),
-					*level - 1, 1);
+						blocksize, parent->start,
+						btrfs_header_owner(parent),
+						*level - 1, 0);
 			BUG_ON(ret);
 			path->slots[*level]++;
 			btrfs_tree_unlock(next);
@@ -3684,6 +4618,8 @@ static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
 			continue;
 		}
 
+		BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
+
 		*level = btrfs_header_level(next);
 		path->nodes[*level] = next;
 		path->slots[*level] = 0;
@@ -3691,13 +4627,15 @@ static noinline int walk_down_subtree(struct btrfs_trans_handle *trans,
 		cond_resched();
 	}
 out:
-	parent = path->nodes[*level + 1];
+	if (path->nodes[*level] == root->node)
+		parent = path->nodes[*level];
+	else
+		parent = path->nodes[*level + 1];
 	bytenr = path->nodes[*level]->start;
 	blocksize = path->nodes[*level]->len;
 
-	ret = btrfs_free_extent(trans, root, bytenr, blocksize,
-			parent->start, btrfs_header_owner(parent),
-			btrfs_header_generation(parent), *level, 1);
+	ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start,
+				btrfs_header_owner(parent), *level, 0);
 	BUG_ON(ret);
 
 	if (path->locks[*level]) {
@@ -3721,8 +4659,6 @@ static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 				 struct btrfs_path *path,
 				 int *level, int max_level)
 {
-	u64 root_owner;
-	u64 root_gen;
 	struct btrfs_root_item *root_item = &root->root_item;
 	int i;
 	int slot;
@@ -3730,24 +4666,22 @@ static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 
 	for (i = *level; i < max_level && path->nodes[i]; i++) {
 		slot = path->slots[i];
-		if (slot < btrfs_header_nritems(path->nodes[i]) - 1) {
-			struct extent_buffer *node;
-			struct btrfs_disk_key disk_key;
-
+		if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
 			/*
 			 * there is more work to do in this level.
 			 * Update the drop_progress marker to reflect
 			 * the work we've done so far, and then bump
 			 * the slot number
 			 */
-			node = path->nodes[i];
 			path->slots[i]++;
-			*level = i;
 			WARN_ON(*level == 0);
-			btrfs_node_key(node, &disk_key, path->slots[i]);
-			memcpy(&root_item->drop_progress,
-			       &disk_key, sizeof(disk_key));
-			root_item->drop_level = i;
+			if (max_level == BTRFS_MAX_LEVEL) {
+				btrfs_node_key(path->nodes[i],
+					       &root_item->drop_progress,
+					       path->slots[i]);
+				root_item->drop_level = i;
+			}
+			*level = i;
 			return 0;
 		} else {
 			struct extent_buffer *parent;
@@ -3761,22 +4695,20 @@ static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 			else
 				parent = path->nodes[*level + 1];
 
-			root_owner = btrfs_header_owner(parent);
-			root_gen = btrfs_header_generation(parent);
-
-			clean_tree_block(trans, root, path->nodes[*level]);
+			clean_tree_block(trans, root, path->nodes[i]);
 			ret = btrfs_free_extent(trans, root,
-						path->nodes[*level]->start,
-						path->nodes[*level]->len,
-						parent->start, root_owner,
-						root_gen, *level, 1);
+						path->nodes[i]->start,
+						path->nodes[i]->len,
+						parent->start,
+						btrfs_header_owner(parent),
+						*level, 0);
 			BUG_ON(ret);
 			if (path->locks[*level]) {
-				btrfs_tree_unlock(path->nodes[*level]);
-				path->locks[*level] = 0;
+				btrfs_tree_unlock(path->nodes[i]);
+				path->locks[i] = 0;
 			}
-			free_extent_buffer(path->nodes[*level]);
-			path->nodes[*level] = NULL;
+			free_extent_buffer(path->nodes[i]);
+			path->nodes[i] = NULL;
 			*level = i + 1;
 		}
 	}
@@ -3795,21 +4727,18 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 	int wret;
 	int level;
 	struct btrfs_path *path;
-	int i;
-	int orig_level;
 	int update_count;
 	struct btrfs_root_item *root_item = &root->root_item;
 
-	WARN_ON(!mutex_is_locked(&root->fs_info->drop_mutex));
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
 	level = btrfs_header_level(root->node);
-	orig_level = level;
 	if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
-		path->nodes[level] = root->node;
-		extent_buffer_get(root->node);
+		path->nodes[level] = btrfs_lock_root_node(root);
+		btrfs_set_lock_blocking(path->nodes[level]);
 		path->slots[level] = 0;
+		path->locks[level] = 1;
 	} else {
 		struct btrfs_key key;
 		struct btrfs_disk_key found_key;
@@ -3831,12 +4760,7 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 		 * unlock our path, this is safe because only this
 		 * function is allowed to delete this snapshot
 		 */
-		for (i = 0; i < BTRFS_MAX_LEVEL; i++) {
-			if (path->nodes[i] && path->locks[i]) {
-				path->locks[i] = 0;
-				btrfs_tree_unlock(path->nodes[i]);
-			}
-		}
+		btrfs_unlock_up_safe(path, 0);
 	}
 	while (1) {
 		unsigned long update;
@@ -3857,8 +4781,6 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 			ret = -EAGAIN;
 			break;
 		}
-		atomic_inc(&root->fs_info->throttle_gen);
-		wake_up(&root->fs_info->transaction_throttle);
 		for (update_count = 0; update_count < 16; update_count++) {
 			update = trans->delayed_ref_updates;
 			trans->delayed_ref_updates = 0;
@@ -3868,12 +4790,6 @@ int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
 				break;
 		}
 	}
-	for (i = 0; i <= orig_level; i++) {
-		if (path->nodes[i]) {
-			free_extent_buffer(path->nodes[i]);
-			path->nodes[i] = NULL;
-		}
-	}
 out:
 	btrfs_free_path(path);
 	return ret;
@@ -3906,7 +4822,7 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 	path->slots[level] = 0;
 
 	while (1) {
-		wret = walk_down_subtree(trans, root, path, &level);
+		wret = walk_down_tree(trans, root, path, &level);
 		if (wret < 0)
 			ret = wret;
 		if (wret != 0)
@@ -3923,6 +4839,7 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
+#if 0
 static unsigned long calc_ra(unsigned long start, unsigned long last,
 			     unsigned long nr)
 {
@@ -5404,6 +6321,7 @@ out:
 	kfree(ref_path);
 	return ret;
 }
+#endif
 
 static u64 update_block_group_flags(struct btrfs_root *root, u64 flags)
 {
@@ -5452,7 +6370,8 @@ static int __alloc_chunk_for_shrink(struct btrfs_root *root,
 	u64 calc;
 
 	spin_lock(&shrink_block_group->lock);
-	if (btrfs_block_group_used(&shrink_block_group->item) > 0) {
+	if (btrfs_block_group_used(&shrink_block_group->item) +
+	    shrink_block_group->reserved > 0) {
 		spin_unlock(&shrink_block_group->lock);
 
 		trans = btrfs_start_transaction(root, 1);
@@ -5477,6 +6396,17 @@ static int __alloc_chunk_for_shrink(struct btrfs_root *root,
 	return 0;
 }
 
+
+int btrfs_prepare_block_group_relocation(struct btrfs_root *root,
+					 struct btrfs_block_group_cache *group)
+
+{
+	__alloc_chunk_for_shrink(root, group, 1);
+	set_block_group_readonly(group);
+	return 0;
+}
+
+#if 0
 static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 u64 objectid, u64 size)
@@ -5756,6 +6686,7 @@ out:
 	btrfs_free_path(path);
 	return ret;
 }
+#endif
 
 static int find_first_block_group(struct btrfs_root *root,
 		struct btrfs_path *path, struct btrfs_key *key)
@@ -5968,6 +6899,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 {
 	struct btrfs_path *path;
 	struct btrfs_block_group_cache *block_group;
+	struct btrfs_free_cluster *cluster;
 	struct btrfs_key key;
 	int ret;
 
@@ -5979,6 +6911,21 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 
 	memcpy(&key, &block_group->key, sizeof(key));
 
+	/* make sure this block group isn't part of an allocation cluster */
+	cluster = &root->fs_info->data_alloc_cluster;
+	spin_lock(&cluster->refill_lock);
+	btrfs_return_cluster_to_free_space(block_group, cluster);
+	spin_unlock(&cluster->refill_lock);
+
+	/*
+	 * make sure this block group isn't part of a metadata
+	 * allocation cluster
+	 */
+	cluster = &root->fs_info->meta_alloc_cluster;
+	spin_lock(&cluster->refill_lock);
+	btrfs_return_cluster_to_free_space(block_group, cluster);
+	spin_unlock(&cluster->refill_lock);
+
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
@@ -5988,7 +6935,11 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	spin_unlock(&root->fs_info->block_group_cache_lock);
 	btrfs_remove_free_space_cache(block_group);
 	down_write(&block_group->space_info->groups_sem);
-	list_del(&block_group->list);
+	/*
+	 * we must use list_del_init so people can check to see if they
+	 * are still on the list after taking the semaphore
+	 */
+	list_del_init(&block_group->list);
 	up_write(&block_group->space_info->groups_sem);
 
 	spin_lock(&block_group->space_info->lock);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index fe9eb990e44..68260180f58 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -476,6 +476,7 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
 	struct extent_state *state;
 	struct extent_state *prealloc = NULL;
 	struct rb_node *node;
+	u64 last_end;
 	int err;
 	int set = 0;
 
@@ -498,6 +499,7 @@ again:
 	if (state->start > end)
 		goto out;
 	WARN_ON(state->end < start);
+	last_end = state->end;
 
 	/*
 	 *     | ---- desired range ---- |
@@ -524,9 +526,11 @@ again:
 		if (err)
 			goto out;
 		if (state->end <= end) {
-			start = state->end + 1;
 			set |= clear_state_bit(tree, state, bits,
 					wake, delete);
+			if (last_end == (u64)-1)
+				goto out;
+			start = last_end + 1;
 		} else {
 			start = state->start;
 		}
@@ -552,8 +556,10 @@ again:
 		goto out;
 	}
 
-	start = state->end + 1;
 	set |= clear_state_bit(tree, state, bits, wake, delete);
+	if (last_end == (u64)-1)
+		goto out;
+	start = last_end + 1;
 	goto search_again;
 
 out:
@@ -707,8 +713,10 @@ again:
 			goto out;
 		}
 		set_state_bits(tree, state, bits);
-		start = state->end + 1;
 		merge_state(tree, state);
+		if (last_end == (u64)-1)
+			goto out;
+		start = last_end + 1;
 		goto search_again;
 	}
 
@@ -742,8 +750,10 @@ again:
 			goto out;
 		if (state->end <= end) {
 			set_state_bits(tree, state, bits);
-			start = state->end + 1;
 			merge_state(tree, state);
+			if (last_end == (u64)-1)
+				goto out;
+			start = last_end + 1;
 		} else {
 			start = state->start;
 		}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 1d51dc38bb4..126477eaecf 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -291,16 +291,12 @@ noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
 {
 	u64 extent_end = 0;
 	u64 search_start = start;
-	u64 leaf_start;
 	u64 ram_bytes = 0;
-	u64 orig_parent = 0;
 	u64 disk_bytenr = 0;
 	u64 orig_locked_end = locked_end;
 	u8 compression;
 	u8 encryption;
 	u16 other_encoding = 0;
-	u64 root_gen;
-	u64 root_owner;
 	struct extent_buffer *leaf;
 	struct btrfs_file_extent_item *extent;
 	struct btrfs_path *path;
@@ -340,9 +336,6 @@ next_slot:
 		bookend = 0;
 		found_extent = 0;
 		found_inline = 0;
-		leaf_start = 0;
-		root_gen = 0;
-		root_owner = 0;
 		compression = 0;
 		encryption = 0;
 		extent = NULL;
@@ -417,9 +410,6 @@ next_slot:
 		if (found_extent) {
 			read_extent_buffer(leaf, &old, (unsigned long)extent,
 					   sizeof(old));
-			root_gen = btrfs_header_generation(leaf);
-			root_owner = btrfs_header_owner(leaf);
-			leaf_start = leaf->start;
 		}
 
 		if (end < extent_end && end >= key.offset) {
@@ -443,14 +433,14 @@ next_slot:
 				}
 				locked_end = extent_end;
 			}
-			orig_parent = path->nodes[0]->start;
 			disk_bytenr = le64_to_cpu(old.disk_bytenr);
 			if (disk_bytenr != 0) {
 				ret = btrfs_inc_extent_ref(trans, root,
 					   disk_bytenr,
-					   le64_to_cpu(old.disk_num_bytes),
-					   orig_parent, root->root_key.objectid,
-					   trans->transid, inode->i_ino);
+					   le64_to_cpu(old.disk_num_bytes), 0,
+					   root->root_key.objectid,
+					   key.objectid, key.offset -
+					   le64_to_cpu(old.offset));
 				BUG_ON(ret);
 			}
 		}
@@ -568,17 +558,6 @@ next_slot:
 			btrfs_mark_buffer_dirty(path->nodes[0]);
 			btrfs_set_lock_blocking(path->nodes[0]);
 
-			if (disk_bytenr != 0) {
-				ret = btrfs_update_extent_ref(trans, root,
-						disk_bytenr,
-						le64_to_cpu(old.disk_num_bytes),
-						orig_parent,
-						leaf->start,
-						root->root_key.objectid,
-						trans->transid, ins.objectid);
-
-				BUG_ON(ret);
-			}
 			path->leave_spinning = 0;
 			btrfs_release_path(root, path);
 			if (disk_bytenr != 0)
@@ -594,8 +573,9 @@ next_slot:
 				ret = btrfs_free_extent(trans, root,
 						old_disk_bytenr,
 						le64_to_cpu(old.disk_num_bytes),
-						leaf_start, root_owner,
-						root_gen, key.objectid, 0);
+						0, root->root_key.objectid,
+						key.objectid, key.offset -
+						le64_to_cpu(old.offset));
 				BUG_ON(ret);
 				*hint_byte = old_disk_bytenr;
 			}
@@ -664,12 +644,11 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
 	u64 bytenr;
 	u64 num_bytes;
 	u64 extent_end;
-	u64 extent_offset;
+	u64 orig_offset;
 	u64 other_start;
 	u64 other_end;
 	u64 split = start;
 	u64 locked_end = end;
-	u64 orig_parent;
 	int extent_type;
 	int split_end = 1;
 	int ret;
@@ -703,7 +682,7 @@ again:
 
 	bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
 	num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
-	extent_offset = btrfs_file_extent_offset(leaf, fi);
+	orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi);
 
 	if (key.offset == start)
 		split = end;
@@ -711,8 +690,6 @@ again:
 	if (key.offset == start && extent_end == end) {
 		int del_nr = 0;
 		int del_slot = 0;
-		u64 leaf_owner = btrfs_header_owner(leaf);
-		u64 leaf_gen = btrfs_header_generation(leaf);
 		other_start = end;
 		other_end = 0;
 		if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino,
@@ -721,8 +698,8 @@ again:
 			del_slot = path->slots[0] + 1;
 			del_nr++;
 			ret = btrfs_free_extent(trans, root, bytenr, num_bytes,
-						leaf->start, leaf_owner,
-						leaf_gen, inode->i_ino, 0);
+						0, root->root_key.objectid,
+						inode->i_ino, orig_offset);
 			BUG_ON(ret);
 		}
 		other_start = 0;
@@ -733,8 +710,8 @@ again:
 			del_slot = path->slots[0];
 			del_nr++;
 			ret = btrfs_free_extent(trans, root, bytenr, num_bytes,
-						leaf->start, leaf_owner,
-						leaf_gen, inode->i_ino, 0);
+						0, root->root_key.objectid,
+						inode->i_ino, orig_offset);
 			BUG_ON(ret);
 		}
 		split_end = 0;
@@ -768,13 +745,12 @@ again:
 			locked_end = extent_end;
 		}
 		btrfs_set_file_extent_num_bytes(leaf, fi, split - key.offset);
-		extent_offset += split - key.offset;
 	} else  {
 		BUG_ON(key.offset != start);
-		btrfs_set_file_extent_offset(leaf, fi, extent_offset +
-					     split - key.offset);
-		btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - split);
 		key.offset = split;
+		btrfs_set_file_extent_offset(leaf, fi, key.offset -
+					     orig_offset);
+		btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - split);
 		btrfs_set_item_key_safe(trans, root, path, &key);
 		extent_end = split;
 	}
@@ -793,7 +769,8 @@ again:
 					    struct btrfs_file_extent_item);
 			key.offset = split;
 			btrfs_set_item_key_safe(trans, root, path, &key);
-			btrfs_set_file_extent_offset(leaf, fi, extent_offset);
+			btrfs_set_file_extent_offset(leaf, fi, key.offset -
+						     orig_offset);
 			btrfs_set_file_extent_num_bytes(leaf, fi,
 							other_end - split);
 			goto done;
@@ -815,10 +792,9 @@ again:
 
 	btrfs_mark_buffer_dirty(leaf);
 
-	orig_parent = leaf->start;
-	ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes,
-				   orig_parent, root->root_key.objectid,
-				   trans->transid, inode->i_ino);
+	ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0,
+				   root->root_key.objectid,
+				   inode->i_ino, orig_offset);
 	BUG_ON(ret);
 	btrfs_release_path(root, path);
 
@@ -833,20 +809,12 @@ again:
 	btrfs_set_file_extent_type(leaf, fi, extent_type);
 	btrfs_set_file_extent_disk_bytenr(leaf, fi, bytenr);
 	btrfs_set_file_extent_disk_num_bytes(leaf, fi, num_bytes);
-	btrfs_set_file_extent_offset(leaf, fi, extent_offset);
+	btrfs_set_file_extent_offset(leaf, fi, key.offset - orig_offset);
 	btrfs_set_file_extent_num_bytes(leaf, fi, extent_end - key.offset);
 	btrfs_set_file_extent_ram_bytes(leaf, fi, num_bytes);
 	btrfs_set_file_extent_compression(leaf, fi, 0);
 	btrfs_set_file_extent_encryption(leaf, fi, 0);
 	btrfs_set_file_extent_other_encoding(leaf, fi, 0);
-
-	if (orig_parent != leaf->start) {
-		ret = btrfs_update_extent_ref(trans, root, bytenr, num_bytes,
-					      orig_parent, leaf->start,
-					      root->root_key.objectid,
-					      trans->transid, inode->i_ino);
-		BUG_ON(ret);
-	}
 done:
 	btrfs_mark_buffer_dirty(leaf);
 
@@ -1189,6 +1157,8 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 	btrfs_wait_ordered_range(inode, 0, (u64)-1);
 	root->log_batch++;
 
+	if (datasync && !(inode->i_state & I_DIRTY_PAGES))
+		goto out;
 	/*
 	 * ok we haven't committed the transaction yet, lets do a commit
 	 */
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 0bc93657b46..4538e48581a 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -579,6 +579,7 @@ out:
  * it returns -enospc
  */
 int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root,
 			     struct btrfs_block_group_cache *block_group,
 			     struct btrfs_free_cluster *cluster,
 			     u64 offset, u64 bytes, u64 empty_size)
@@ -595,7 +596,9 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
 	int ret;
 
 	/* for metadata, allow allocates with more holes */
-	if (block_group->flags & BTRFS_BLOCK_GROUP_METADATA) {
+	if (btrfs_test_opt(root, SSD_SPREAD)) {
+		min_bytes = bytes + empty_size;
+	} else if (block_group->flags & BTRFS_BLOCK_GROUP_METADATA) {
 		/*
 		 * we want to do larger allocations when we are
 		 * flushing out the delayed refs, it helps prevent
@@ -645,14 +648,15 @@ again:
 		 * we haven't filled the empty size and the window is
 		 * very large.  reset and try again
 		 */
-		if (next->offset - window_start > (bytes + empty_size) * 2) {
+		if (next->offset - (last->offset + last->bytes) > 128 * 1024 ||
+		    next->offset - window_start > (bytes + empty_size) * 2) {
 			entry = next;
 			window_start = entry->offset;
 			window_free = entry->bytes;
 			last = entry;
 			max_extent = 0;
 			total_retries++;
-			if (total_retries % 256 == 0) {
+			if (total_retries % 64 == 0) {
 				if (min_bytes >= (bytes + empty_size)) {
 					ret = -ENOSPC;
 					goto out;
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index ab0bdc0a63c..266fb876405 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -31,6 +31,7 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
 			   u64 bytes);
 u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group);
 int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root,
 			     struct btrfs_block_group_cache *block_group,
 			     struct btrfs_free_cluster *cluster,
 			     u64 offset, u64 bytes, u64 empty_size);
diff --git a/fs/btrfs/hash.h b/fs/btrfs/hash.h
index 2a020b27676..db2ff9773b9 100644
--- a/fs/btrfs/hash.h
+++ b/fs/btrfs/hash.h
@@ -19,9 +19,9 @@
 #ifndef __HASH__
 #define __HASH__
 
-#include "crc32c.h"
+#include <linux/crc32c.h>
 static inline u64 btrfs_name_hash(const char *name, int len)
 {
-	return btrfs_crc32c((u32)~1, name, len);
+	return crc32c((u32)~1, name, len);
 }
 #endif
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 90c23eb2882..8612b3a0981 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -48,7 +48,6 @@
 #include "ordered-data.h"
 #include "xattr.h"
 #include "tree-log.h"
-#include "ref-cache.h"
 #include "compression.h"
 #include "locking.h"
 
@@ -369,7 +368,7 @@ again:
 	 * inode has not been flagged as nocompress.  This flag can
 	 * change at any time if we discover bad compression ratios.
 	 */
-	if (!btrfs_test_flag(inode, NOCOMPRESS) &&
+	if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NOCOMPRESS) &&
 	    btrfs_test_opt(root, COMPRESS)) {
 		WARN_ON(pages);
 		pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS);
@@ -470,7 +469,7 @@ again:
 		nr_pages_ret = 0;
 
 		/* flag the file so we don't compress in the future */
-		btrfs_set_flag(inode, NOCOMPRESS);
+		BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
 	}
 	if (will_compress) {
 		*num_added += 1;
@@ -863,7 +862,7 @@ static int cow_file_range_async(struct inode *inode, struct page *locked_page,
 		async_cow->locked_page = locked_page;
 		async_cow->start = start;
 
-		if (btrfs_test_flag(inode, NOCOMPRESS))
+		if (BTRFS_I(inode)->flags & BTRFS_INODE_NOCOMPRESS)
 			cur_end = end;
 		else
 			cur_end = min(end, start + 512 * 1024 - 1);
@@ -944,6 +943,7 @@ static noinline int run_delalloc_nocow(struct inode *inode,
 	u64 cow_start;
 	u64 cur_offset;
 	u64 extent_end;
+	u64 extent_offset;
 	u64 disk_bytenr;
 	u64 num_bytes;
 	int extent_type;
@@ -1005,6 +1005,7 @@ next_slot:
 		if (extent_type == BTRFS_FILE_EXTENT_REG ||
 		    extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
 			disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+			extent_offset = btrfs_file_extent_offset(leaf, fi);
 			extent_end = found_key.offset +
 				btrfs_file_extent_num_bytes(leaf, fi);
 			if (extent_end <= start) {
@@ -1022,9 +1023,10 @@ next_slot:
 			if (btrfs_extent_readonly(root, disk_bytenr))
 				goto out_check;
 			if (btrfs_cross_ref_exist(trans, root, inode->i_ino,
-						  disk_bytenr))
+						  found_key.offset -
+						  extent_offset, disk_bytenr))
 				goto out_check;
-			disk_bytenr += btrfs_file_extent_offset(leaf, fi);
+			disk_bytenr += extent_offset;
 			disk_bytenr += cur_offset - found_key.offset;
 			num_bytes = min(end + 1, extent_end) - cur_offset;
 			/*
@@ -1131,10 +1133,10 @@ static int run_delalloc_range(struct inode *inode, struct page *locked_page,
 	int ret;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 
-	if (btrfs_test_flag(inode, NODATACOW))
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 1, nr_written);
-	else if (btrfs_test_flag(inode, PREALLOC))
+	else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 0, nr_written);
 	else if (!btrfs_test_opt(root, COMPRESS))
@@ -1288,7 +1290,7 @@ static int btrfs_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
 	int ret = 0;
 	int skip_sum;
 
-	skip_sum = btrfs_test_flag(inode, NODATASUM);
+	skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
 
 	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
 	BUG_ON(ret);
@@ -1489,9 +1491,9 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
 	ins.objectid = disk_bytenr;
 	ins.offset = disk_num_bytes;
 	ins.type = BTRFS_EXTENT_ITEM_KEY;
-	ret = btrfs_alloc_reserved_extent(trans, root, leaf->start,
-					  root->root_key.objectid,
-					  trans->transid, inode->i_ino, &ins);
+	ret = btrfs_alloc_reserved_file_extent(trans, root,
+					root->root_key.objectid,
+					inode->i_ino, file_pos, &ins);
 	BUG_ON(ret);
 	btrfs_free_path(path);
 
@@ -1788,7 +1790,8 @@ static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end,
 		ClearPageChecked(page);
 		goto good;
 	}
-	if (btrfs_test_flag(inode, NODATASUM))
+
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
 		return 0;
 
 	if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
@@ -1956,23 +1959,13 @@ void btrfs_orphan_cleanup(struct btrfs_root *root)
 		 * crossing root thing.  we store the inode number in the
 		 * offset of the orphan item.
 		 */
-		inode = btrfs_iget_locked(root->fs_info->sb,
-					  found_key.offset, root);
-		if (!inode)
+		found_key.objectid = found_key.offset;
+		found_key.type = BTRFS_INODE_ITEM_KEY;
+		found_key.offset = 0;
+		inode = btrfs_iget(root->fs_info->sb, &found_key, root);
+		if (IS_ERR(inode))
 			break;
 
-		if (inode->i_state & I_NEW) {
-			BTRFS_I(inode)->root = root;
-
-			/* have to set the location manually */
-			BTRFS_I(inode)->location.objectid = inode->i_ino;
-			BTRFS_I(inode)->location.type = BTRFS_INODE_ITEM_KEY;
-			BTRFS_I(inode)->location.offset = 0;
-
-			btrfs_read_locked_inode(inode);
-			unlock_new_inode(inode);
-		}
-
 		/*
 		 * add this inode to the orphan list so btrfs_orphan_del does
 		 * the proper thing when we hit it
@@ -2069,7 +2062,7 @@ static noinline int acls_after_inode_item(struct extent_buffer *leaf,
 /*
  * read an inode from the btree into the in-memory inode
  */
-void btrfs_read_locked_inode(struct inode *inode)
+static void btrfs_read_locked_inode(struct inode *inode)
 {
 	struct btrfs_path *path;
 	struct extent_buffer *leaf;
@@ -2164,6 +2157,8 @@ void btrfs_read_locked_inode(struct inode *inode)
 		init_special_inode(inode, inode->i_mode, rdev);
 		break;
 	}
+
+	btrfs_update_iflags(inode);
 	return;
 
 make_bad:
@@ -2327,7 +2322,6 @@ err:
 	btrfs_update_inode(trans, root, dir);
 	btrfs_drop_nlink(inode);
 	ret = btrfs_update_inode(trans, root, inode);
-	dir->i_sb->s_dirt = 1;
 out:
 	return ret;
 }
@@ -2599,9 +2593,8 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 	struct btrfs_file_extent_item *fi;
 	u64 extent_start = 0;
 	u64 extent_num_bytes = 0;
+	u64 extent_offset = 0;
 	u64 item_end = 0;
-	u64 root_gen = 0;
-	u64 root_owner = 0;
 	int found_extent;
 	int del_item;
 	int pending_del_nr = 0;
@@ -2716,6 +2709,9 @@ search_again:
 				extent_num_bytes =
 					btrfs_file_extent_disk_num_bytes(leaf,
 									 fi);
+				extent_offset = found_key.offset -
+					btrfs_file_extent_offset(leaf, fi);
+
 				/* FIXME blocksize != 4096 */
 				num_dec = btrfs_file_extent_num_bytes(leaf, fi);
 				if (extent_start != 0) {
@@ -2723,8 +2719,6 @@ search_again:
 					if (root->ref_cows)
 						inode_sub_bytes(inode, num_dec);
 				}
-				root_gen = btrfs_header_generation(leaf);
-				root_owner = btrfs_header_owner(leaf);
 			}
 		} else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
 			/*
@@ -2768,12 +2762,12 @@ delete:
 		} else {
 			break;
 		}
-		if (found_extent) {
+		if (found_extent && root->ref_cows) {
 			btrfs_set_path_blocking(path);
 			ret = btrfs_free_extent(trans, root, extent_start,
-						extent_num_bytes,
-						leaf->start, root_owner,
-						root_gen, inode->i_ino, 0);
+						extent_num_bytes, 0,
+						btrfs_header_owner(leaf),
+						inode->i_ino, extent_offset);
 			BUG_ON(ret);
 		}
 next:
@@ -2811,7 +2805,6 @@ error:
 				      pending_del_nr);
 	}
 	btrfs_free_path(path);
-	inode->i_sb->s_dirt = 1;
 	return ret;
 }
 
@@ -3105,6 +3098,45 @@ static int fixup_tree_root_location(struct btrfs_root *root,
 	return 0;
 }
 
+static void inode_tree_add(struct inode *inode)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_inode *entry;
+	struct rb_node **p = &root->inode_tree.rb_node;
+	struct rb_node *parent = NULL;
+
+	spin_lock(&root->inode_lock);
+	while (*p) {
+		parent = *p;
+		entry = rb_entry(parent, struct btrfs_inode, rb_node);
+
+		if (inode->i_ino < entry->vfs_inode.i_ino)
+			p = &(*p)->rb_left;
+		else if (inode->i_ino > entry->vfs_inode.i_ino)
+			p = &(*p)->rb_right;
+		else {
+			WARN_ON(!(entry->vfs_inode.i_state &
+				  (I_WILL_FREE | I_FREEING | I_CLEAR)));
+			break;
+		}
+	}
+	rb_link_node(&BTRFS_I(inode)->rb_node, parent, p);
+	rb_insert_color(&BTRFS_I(inode)->rb_node, &root->inode_tree);
+	spin_unlock(&root->inode_lock);
+}
+
+static void inode_tree_del(struct inode *inode)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+
+	if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
+		spin_lock(&root->inode_lock);
+		rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
+		spin_unlock(&root->inode_lock);
+		RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
+	}
+}
+
 static noinline void init_btrfs_i(struct inode *inode)
 {
 	struct btrfs_inode *bi = BTRFS_I(inode);
@@ -3122,6 +3154,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 	bi->flags = 0;
 	bi->index_cnt = (u64)-1;
 	bi->last_unlink_trans = 0;
+	bi->ordered_data_close = 0;
 	extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
 	extent_io_tree_init(&BTRFS_I(inode)->io_tree,
 			     inode->i_mapping, GFP_NOFS);
@@ -3129,6 +3162,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 			     inode->i_mapping, GFP_NOFS);
 	INIT_LIST_HEAD(&BTRFS_I(inode)->delalloc_inodes);
 	INIT_LIST_HEAD(&BTRFS_I(inode)->ordered_operations);
+	RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
 	btrfs_ordered_inode_tree_init(&BTRFS_I(inode)->ordered_tree);
 	mutex_init(&BTRFS_I(inode)->extent_mutex);
 	mutex_init(&BTRFS_I(inode)->log_mutex);
@@ -3151,26 +3185,9 @@ static int btrfs_find_actor(struct inode *inode, void *opaque)
 		args->root == BTRFS_I(inode)->root;
 }
 
-struct inode *btrfs_ilookup(struct super_block *s, u64 objectid,
-			    struct btrfs_root *root, int wait)
-{
-	struct inode *inode;
-	struct btrfs_iget_args args;
-	args.ino = objectid;
-	args.root = root;
-
-	if (wait) {
-		inode = ilookup5(s, objectid, btrfs_find_actor,
-				 (void *)&args);
-	} else {
-		inode = ilookup5_nowait(s, objectid, btrfs_find_actor,
-					(void *)&args);
-	}
-	return inode;
-}
-
-struct inode *btrfs_iget_locked(struct super_block *s, u64 objectid,
-				struct btrfs_root *root)
+static struct inode *btrfs_iget_locked(struct super_block *s,
+				       u64 objectid,
+				       struct btrfs_root *root)
 {
 	struct inode *inode;
 	struct btrfs_iget_args args;
@@ -3187,24 +3204,21 @@ struct inode *btrfs_iget_locked(struct super_block *s, u64 objectid,
  * Returns in *is_new if the inode was read from disk
  */
 struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location,
-			 struct btrfs_root *root, int *is_new)
+			 struct btrfs_root *root)
 {
 	struct inode *inode;
 
 	inode = btrfs_iget_locked(s, location->objectid, root);
 	if (!inode)
-		return ERR_PTR(-EACCES);
+		return ERR_PTR(-ENOMEM);
 
 	if (inode->i_state & I_NEW) {
 		BTRFS_I(inode)->root = root;
 		memcpy(&BTRFS_I(inode)->location, location, sizeof(*location));
 		btrfs_read_locked_inode(inode);
+
+		inode_tree_add(inode);
 		unlock_new_inode(inode);
-		if (is_new)
-			*is_new = 1;
-	} else {
-		if (is_new)
-			*is_new = 0;
 	}
 
 	return inode;
@@ -3217,7 +3231,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 	struct btrfs_root *root = bi->root;
 	struct btrfs_root *sub_root = root;
 	struct btrfs_key location;
-	int ret, new;
+	int ret;
 
 	if (dentry->d_name.len > BTRFS_NAME_LEN)
 		return ERR_PTR(-ENAMETOOLONG);
@@ -3235,7 +3249,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 			return ERR_PTR(ret);
 		if (ret > 0)
 			return ERR_PTR(-ENOENT);
-		inode = btrfs_iget(dir->i_sb, &location, sub_root, &new);
+		inode = btrfs_iget(dir->i_sb, &location, sub_root);
 		if (IS_ERR(inode))
 			return ERR_CAST(inode);
 	}
@@ -3573,9 +3587,9 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 			btrfs_find_block_group(root, 0, alloc_hint, owner);
 	if ((mode & S_IFREG)) {
 		if (btrfs_test_opt(root, NODATASUM))
-			btrfs_set_flag(inode, NODATASUM);
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
 		if (btrfs_test_opt(root, NODATACOW))
-			btrfs_set_flag(inode, NODATACOW);
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
 	}
 
 	key[0].objectid = objectid;
@@ -3629,7 +3643,10 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 	location->offset = 0;
 	btrfs_set_key_type(location, BTRFS_INODE_ITEM_KEY);
 
+	btrfs_inherit_iflags(inode, dir);
+
 	insert_inode_hash(inode);
+	inode_tree_add(inode);
 	return inode;
 fail:
 	if (dir)
@@ -3749,7 +3766,6 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 		init_special_inode(inode, inode->i_mode, rdev);
 		btrfs_update_inode(trans, root, inode);
 	}
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 out_unlock:
@@ -3814,7 +3830,6 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 		inode->i_op = &btrfs_file_inode_operations;
 		BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
 	}
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 out_unlock:
@@ -3861,7 +3876,6 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	if (err)
 		drop_inode = 1;
 
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, dir);
 	err = btrfs_update_inode(trans, root, inode);
 
@@ -3943,7 +3957,6 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 
 	d_instantiate(dentry, inode);
 	drop_on_err = 0;
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 
@@ -4295,7 +4308,6 @@ out:
 	}
 	if (err) {
 		free_extent_map(em);
-		WARN_ON(1);
 		return ERR_PTR(err);
 	}
 	return em;
@@ -4683,6 +4695,7 @@ void btrfs_destroy_inode(struct inode *inode)
 			btrfs_put_ordered_extent(ordered);
 		}
 	}
+	inode_tree_del(inode);
 	btrfs_drop_extent_cache(inode, 0, (u64)-1, 0);
 	kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
 }
@@ -4972,7 +4985,6 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 		inode->i_op = &btrfs_file_inode_operations;
 		BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
 	}
-	dir->i_sb->s_dirt = 1;
 	btrfs_update_inode_block_group(trans, inode);
 	btrfs_update_inode_block_group(trans, dir);
 	if (drop_inode)
@@ -5061,7 +5073,7 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans,
 out:
 	if (cur_offset > start) {
 		inode->i_ctime = CURRENT_TIME;
-		btrfs_set_flag(inode, PREALLOC);
+		BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
 		if (!(mode & FALLOC_FL_KEEP_SIZE) &&
 		    cur_offset > i_size_read(inode))
 			btrfs_i_size_write(inode, cur_offset);
@@ -5182,7 +5194,7 @@ static int btrfs_set_page_dirty(struct page *page)
 
 static int btrfs_permission(struct inode *inode, int mask)
 {
-	if (btrfs_test_flag(inode, READONLY) && (mask & MAY_WRITE))
+	if ((BTRFS_I(inode)->flags & BTRFS_INODE_READONLY) && (mask & MAY_WRITE))
 		return -EACCES;
 	return generic_permission(inode, mask, btrfs_check_acl);
 }
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 5e94ea6e1cb..eff18f5b536 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -50,7 +50,177 @@
 #include "volumes.h"
 #include "locking.h"
 
+/* Mask out flags that are inappropriate for the given type of inode. */
+static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
+{
+	if (S_ISDIR(mode))
+		return flags;
+	else if (S_ISREG(mode))
+		return flags & ~FS_DIRSYNC_FL;
+	else
+		return flags & (FS_NODUMP_FL | FS_NOATIME_FL);
+}
+
+/*
+ * Export inode flags to the format expected by the FS_IOC_GETFLAGS ioctl.
+ */
+static unsigned int btrfs_flags_to_ioctl(unsigned int flags)
+{
+	unsigned int iflags = 0;
+
+	if (flags & BTRFS_INODE_SYNC)
+		iflags |= FS_SYNC_FL;
+	if (flags & BTRFS_INODE_IMMUTABLE)
+		iflags |= FS_IMMUTABLE_FL;
+	if (flags & BTRFS_INODE_APPEND)
+		iflags |= FS_APPEND_FL;
+	if (flags & BTRFS_INODE_NODUMP)
+		iflags |= FS_NODUMP_FL;
+	if (flags & BTRFS_INODE_NOATIME)
+		iflags |= FS_NOATIME_FL;
+	if (flags & BTRFS_INODE_DIRSYNC)
+		iflags |= FS_DIRSYNC_FL;
+
+	return iflags;
+}
+
+/*
+ * Update inode->i_flags based on the btrfs internal flags.
+ */
+void btrfs_update_iflags(struct inode *inode)
+{
+	struct btrfs_inode *ip = BTRFS_I(inode);
+
+	inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC);
+
+	if (ip->flags & BTRFS_INODE_SYNC)
+		inode->i_flags |= S_SYNC;
+	if (ip->flags & BTRFS_INODE_IMMUTABLE)
+		inode->i_flags |= S_IMMUTABLE;
+	if (ip->flags & BTRFS_INODE_APPEND)
+		inode->i_flags |= S_APPEND;
+	if (ip->flags & BTRFS_INODE_NOATIME)
+		inode->i_flags |= S_NOATIME;
+	if (ip->flags & BTRFS_INODE_DIRSYNC)
+		inode->i_flags |= S_DIRSYNC;
+}
+
+/*
+ * Inherit flags from the parent inode.
+ *
+ * Unlike extN we don't have any flags we don't want to inherit currently.
+ */
+void btrfs_inherit_iflags(struct inode *inode, struct inode *dir)
+{
+	unsigned int flags;
+
+	if (!dir)
+		return;
+
+	flags = BTRFS_I(dir)->flags;
+
+	if (S_ISREG(inode->i_mode))
+		flags &= ~BTRFS_INODE_DIRSYNC;
+	else if (!S_ISDIR(inode->i_mode))
+		flags &= (BTRFS_INODE_NODUMP | BTRFS_INODE_NOATIME);
+
+	BTRFS_I(inode)->flags = flags;
+	btrfs_update_iflags(inode);
+}
+
+static int btrfs_ioctl_getflags(struct file *file, void __user *arg)
+{
+	struct btrfs_inode *ip = BTRFS_I(file->f_path.dentry->d_inode);
+	unsigned int flags = btrfs_flags_to_ioctl(ip->flags);
+
+	if (copy_to_user(arg, &flags, sizeof(flags)))
+		return -EFAULT;
+	return 0;
+}
+
+static int btrfs_ioctl_setflags(struct file *file, void __user *arg)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	struct btrfs_inode *ip = BTRFS_I(inode);
+	struct btrfs_root *root = ip->root;
+	struct btrfs_trans_handle *trans;
+	unsigned int flags, oldflags;
+	int ret;
+
+	if (copy_from_user(&flags, arg, sizeof(flags)))
+		return -EFAULT;
+
+	if (flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | \
+		      FS_NOATIME_FL | FS_NODUMP_FL | \
+		      FS_SYNC_FL | FS_DIRSYNC_FL))
+		return -EOPNOTSUPP;
+
+	if (!is_owner_or_cap(inode))
+		return -EACCES;
 
+	mutex_lock(&inode->i_mutex);
+
+	flags = btrfs_mask_flags(inode->i_mode, flags);
+	oldflags = btrfs_flags_to_ioctl(ip->flags);
+	if ((flags ^ oldflags) & (FS_APPEND_FL | FS_IMMUTABLE_FL)) {
+		if (!capable(CAP_LINUX_IMMUTABLE)) {
+			ret = -EPERM;
+			goto out_unlock;
+		}
+	}
+
+	ret = mnt_want_write(file->f_path.mnt);
+	if (ret)
+		goto out_unlock;
+
+	if (flags & FS_SYNC_FL)
+		ip->flags |= BTRFS_INODE_SYNC;
+	else
+		ip->flags &= ~BTRFS_INODE_SYNC;
+	if (flags & FS_IMMUTABLE_FL)
+		ip->flags |= BTRFS_INODE_IMMUTABLE;
+	else
+		ip->flags &= ~BTRFS_INODE_IMMUTABLE;
+	if (flags & FS_APPEND_FL)
+		ip->flags |= BTRFS_INODE_APPEND;
+	else
+		ip->flags &= ~BTRFS_INODE_APPEND;
+	if (flags & FS_NODUMP_FL)
+		ip->flags |= BTRFS_INODE_NODUMP;
+	else
+		ip->flags &= ~BTRFS_INODE_NODUMP;
+	if (flags & FS_NOATIME_FL)
+		ip->flags |= BTRFS_INODE_NOATIME;
+	else
+		ip->flags &= ~BTRFS_INODE_NOATIME;
+	if (flags & FS_DIRSYNC_FL)
+		ip->flags |= BTRFS_INODE_DIRSYNC;
+	else
+		ip->flags &= ~BTRFS_INODE_DIRSYNC;
+
+
+	trans = btrfs_join_transaction(root, 1);
+	BUG_ON(!trans);
+
+	ret = btrfs_update_inode(trans, root, inode);
+	BUG_ON(ret);
+
+	btrfs_update_iflags(inode);
+	inode->i_ctime = CURRENT_TIME;
+	btrfs_end_transaction(trans, root);
+
+	mnt_drop_write(file->f_path.mnt);
+ out_unlock:
+	mutex_unlock(&inode->i_mutex);
+	return 0;
+}
+
+static int btrfs_ioctl_getversion(struct file *file, int __user *arg)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+
+	return put_user(inode->i_generation, arg);
+}
 
 static noinline int create_subvol(struct btrfs_root *root,
 				  struct dentry *dentry,
@@ -82,22 +252,25 @@ static noinline int create_subvol(struct btrfs_root *root,
 	if (ret)
 		goto fail;
 
-	leaf = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
-				      objectid, trans->transid, 0, 0, 0);
+	leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
+				      0, objectid, NULL, 0, 0, 0);
 	if (IS_ERR(leaf)) {
 		ret = PTR_ERR(leaf);
 		goto fail;
 	}
 
-	btrfs_set_header_nritems(leaf, 0);
-	btrfs_set_header_level(leaf, 0);
+	memset_extent_buffer(leaf, 0, 0, sizeof(struct btrfs_header));
 	btrfs_set_header_bytenr(leaf, leaf->start);
 	btrfs_set_header_generation(leaf, trans->transid);
+	btrfs_set_header_backref_rev(leaf, BTRFS_MIXED_BACKREF_REV);
 	btrfs_set_header_owner(leaf, objectid);
 
 	write_extent_buffer(leaf, root->fs_info->fsid,
 			    (unsigned long)btrfs_header_fsid(leaf),
 			    BTRFS_FSID_SIZE);
+	write_extent_buffer(leaf, root->fs_info->chunk_tree_uuid,
+			    (unsigned long)btrfs_header_chunk_tree_uuid(leaf),
+			    BTRFS_UUID_SIZE);
 	btrfs_mark_buffer_dirty(leaf);
 
 	inode_item = &root_item.inode;
@@ -125,7 +298,7 @@ static noinline int create_subvol(struct btrfs_root *root,
 	btrfs_set_root_dirid(&root_item, new_dirid);
 
 	key.objectid = objectid;
-	key.offset = 1;
+	key.offset = 0;
 	btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
 	ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
 				&root_item);
@@ -437,10 +610,6 @@ out_unlock:
 	return 0;
 }
 
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-
 static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
 {
 	u64 new_size;
@@ -915,10 +1084,10 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 				if (disko) {
 					inode_add_bytes(inode, datal);
 					ret = btrfs_inc_extent_ref(trans, root,
-						   disko, diskl, leaf->start,
-						   root->root_key.objectid,
-						   trans->transid,
-						   inode->i_ino);
+							disko, diskl, 0,
+							root->root_key.objectid,
+							inode->i_ino,
+							new_key.offset - datao);
 					BUG_ON(ret);
 				}
 			} else if (type == BTRFS_FILE_EXTENT_INLINE) {
@@ -1078,6 +1247,12 @@ long btrfs_ioctl(struct file *file, unsigned int
 	void __user *argp = (void __user *)arg;
 
 	switch (cmd) {
+	case FS_IOC_GETFLAGS:
+		return btrfs_ioctl_getflags(file, argp);
+	case FS_IOC_SETFLAGS:
+		return btrfs_ioctl_setflags(file, argp);
+	case FS_IOC_GETVERSION:
+		return btrfs_ioctl_getversion(file, argp);
 	case BTRFS_IOC_SNAP_CREATE:
 		return btrfs_ioctl_snap_create(file, argp, 0);
 	case BTRFS_IOC_SUBVOL_CREATE:
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index 5f8f218c100..6d6523da0a3 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -45,22 +45,132 @@ static void print_dev_item(struct extent_buffer *eb,
 	       (unsigned long long)btrfs_device_total_bytes(eb, dev_item),
 	       (unsigned long long)btrfs_device_bytes_used(eb, dev_item));
 }
+static void print_extent_data_ref(struct extent_buffer *eb,
+				  struct btrfs_extent_data_ref *ref)
+{
+	printk(KERN_INFO "\t\textent data backref root %llu "
+	       "objectid %llu offset %llu count %u\n",
+	       (unsigned long long)btrfs_extent_data_ref_root(eb, ref),
+	       (unsigned long long)btrfs_extent_data_ref_objectid(eb, ref),
+	       (unsigned long long)btrfs_extent_data_ref_offset(eb, ref),
+	       btrfs_extent_data_ref_count(eb, ref));
+}
+
+static void print_extent_item(struct extent_buffer *eb, int slot)
+{
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *iref;
+	struct btrfs_extent_data_ref *dref;
+	struct btrfs_shared_data_ref *sref;
+	struct btrfs_disk_key key;
+	unsigned long end;
+	unsigned long ptr;
+	int type;
+	u32 item_size = btrfs_item_size_nr(eb, slot);
+	u64 flags;
+	u64 offset;
+
+	if (item_size < sizeof(*ei)) {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		struct btrfs_extent_item_v0 *ei0;
+		BUG_ON(item_size != sizeof(*ei0));
+		ei0 = btrfs_item_ptr(eb, slot, struct btrfs_extent_item_v0);
+		printk(KERN_INFO "\t\textent refs %u\n",
+		       btrfs_extent_refs_v0(eb, ei0));
+		return;
+#else
+		BUG();
+#endif
+	}
+
+	ei = btrfs_item_ptr(eb, slot, struct btrfs_extent_item);
+	flags = btrfs_extent_flags(eb, ei);
+
+	printk(KERN_INFO "\t\textent refs %llu gen %llu flags %llu\n",
+	       (unsigned long long)btrfs_extent_refs(eb, ei),
+	       (unsigned long long)btrfs_extent_generation(eb, ei),
+	       (unsigned long long)flags);
+
+	if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+		struct btrfs_tree_block_info *info;
+		info = (struct btrfs_tree_block_info *)(ei + 1);
+		btrfs_tree_block_key(eb, info, &key);
+		printk(KERN_INFO "\t\ttree block key (%llu %x %llu) "
+		       "level %d\n",
+		       (unsigned long long)btrfs_disk_key_objectid(&key),
+		       key.type,
+		       (unsigned long long)btrfs_disk_key_offset(&key),
+		       btrfs_tree_block_level(eb, info));
+		iref = (struct btrfs_extent_inline_ref *)(info + 1);
+	} else {
+		iref = (struct btrfs_extent_inline_ref *)(ei + 1);
+	}
+
+	ptr = (unsigned long)iref;
+	end = (unsigned long)ei + item_size;
+	while (ptr < end) {
+		iref = (struct btrfs_extent_inline_ref *)ptr;
+		type = btrfs_extent_inline_ref_type(eb, iref);
+		offset = btrfs_extent_inline_ref_offset(eb, iref);
+		switch (type) {
+		case BTRFS_TREE_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\ttree block backref "
+				"root %llu\n", (unsigned long long)offset);
+			break;
+		case BTRFS_SHARED_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\tshared block backref "
+				"parent %llu\n", (unsigned long long)offset);
+			break;
+		case BTRFS_EXTENT_DATA_REF_KEY:
+			dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+			print_extent_data_ref(eb, dref);
+			break;
+		case BTRFS_SHARED_DATA_REF_KEY:
+			sref = (struct btrfs_shared_data_ref *)(iref + 1);
+			printk(KERN_INFO "\t\tshared data backref "
+			       "parent %llu count %u\n",
+			       (unsigned long long)offset,
+			       btrfs_shared_data_ref_count(eb, sref));
+			break;
+		default:
+			BUG();
+		}
+		ptr += btrfs_extent_inline_ref_size(type);
+	}
+	WARN_ON(ptr > end);
+}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static void print_extent_ref_v0(struct extent_buffer *eb, int slot)
+{
+	struct btrfs_extent_ref_v0 *ref0;
+
+	ref0 = btrfs_item_ptr(eb, slot, struct btrfs_extent_ref_v0);
+	printk("\t\textent back ref root %llu gen %llu "
+		"owner %llu num_refs %lu\n",
+		(unsigned long long)btrfs_ref_root_v0(eb, ref0),
+		(unsigned long long)btrfs_ref_generation_v0(eb, ref0),
+		(unsigned long long)btrfs_ref_objectid_v0(eb, ref0),
+		(unsigned long)btrfs_ref_count_v0(eb, ref0));
+}
+#endif
+
 void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 {
 	int i;
+	u32 type;
 	u32 nr = btrfs_header_nritems(l);
 	struct btrfs_item *item;
-	struct btrfs_extent_item *ei;
 	struct btrfs_root_item *ri;
 	struct btrfs_dir_item *di;
 	struct btrfs_inode_item *ii;
 	struct btrfs_block_group_item *bi;
 	struct btrfs_file_extent_item *fi;
+	struct btrfs_extent_data_ref *dref;
+	struct btrfs_shared_data_ref *sref;
+	struct btrfs_dev_extent *dev_extent;
 	struct btrfs_key key;
 	struct btrfs_key found_key;
-	struct btrfs_extent_ref *ref;
-	struct btrfs_dev_extent *dev_extent;
-	u32 type;
 
 	printk(KERN_INFO "leaf %llu total ptrs %d free space %d\n",
 		(unsigned long long)btrfs_header_bytenr(l), nr,
@@ -100,20 +210,25 @@ void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 				btrfs_disk_root_refs(l, ri));
 			break;
 		case BTRFS_EXTENT_ITEM_KEY:
-			ei = btrfs_item_ptr(l, i, struct btrfs_extent_item);
-			printk(KERN_INFO "\t\textent data refs %u\n",
-				btrfs_extent_refs(l, ei));
-			break;
-		case BTRFS_EXTENT_REF_KEY:
-			ref = btrfs_item_ptr(l, i, struct btrfs_extent_ref);
-			printk(KERN_INFO "\t\textent back ref root %llu "
-			       "gen %llu owner %llu num_refs %lu\n",
-			       (unsigned long long)btrfs_ref_root(l, ref),
-			       (unsigned long long)btrfs_ref_generation(l, ref),
-			       (unsigned long long)btrfs_ref_objectid(l, ref),
-			       (unsigned long)btrfs_ref_num_refs(l, ref));
+			print_extent_item(l, i);
+			break;
+		case BTRFS_TREE_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\ttree block backref\n");
+			break;
+		case BTRFS_SHARED_BLOCK_REF_KEY:
+			printk(KERN_INFO "\t\tshared block backref\n");
+			break;
+		case BTRFS_EXTENT_DATA_REF_KEY:
+			dref = btrfs_item_ptr(l, i,
+					      struct btrfs_extent_data_ref);
+			print_extent_data_ref(l, dref);
+			break;
+		case BTRFS_SHARED_DATA_REF_KEY:
+			sref = btrfs_item_ptr(l, i,
+					      struct btrfs_shared_data_ref);
+			printk(KERN_INFO "\t\tshared data backref count %u\n",
+			       btrfs_shared_data_ref_count(l, sref));
 			break;
-
 		case BTRFS_EXTENT_DATA_KEY:
 			fi = btrfs_item_ptr(l, i,
 					    struct btrfs_file_extent_item);
@@ -139,6 +254,12 @@ void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 			       (unsigned long long)
 			       btrfs_file_extent_ram_bytes(l, fi));
 			break;
+		case BTRFS_EXTENT_REF_V0_KEY:
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+			print_extent_ref_v0(l, i);
+#else
+			BUG();
+#endif
 		case BTRFS_BLOCK_GROUP_ITEM_KEY:
 			bi = btrfs_item_ptr(l, i,
 					    struct btrfs_block_group_item);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
new file mode 100644
index 00000000000..b23dc209ae1
--- /dev/null
+++ b/fs/btrfs/relocation.c
@@ -0,0 +1,3711 @@
+/*
+ * Copyright (C) 2009 Oracle.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/writeback.h>
+#include <linux/blkdev.h>
+#include <linux/rbtree.h>
+#include "ctree.h"
+#include "disk-io.h"
+#include "transaction.h"
+#include "volumes.h"
+#include "locking.h"
+#include "btrfs_inode.h"
+#include "async-thread.h"
+
+/*
+ * backref_node, mapping_node and tree_block start with this
+ */
+struct tree_entry {
+	struct rb_node rb_node;
+	u64 bytenr;
+};
+
+/*
+ * present a tree block in the backref cache
+ */
+struct backref_node {
+	struct rb_node rb_node;
+	u64 bytenr;
+	/* objectid tree block owner */
+	u64 owner;
+	/* list of upper level blocks reference this block */
+	struct list_head upper;
+	/* list of child blocks in the cache */
+	struct list_head lower;
+	/* NULL if this node is not tree root */
+	struct btrfs_root *root;
+	/* extent buffer got by COW the block */
+	struct extent_buffer *eb;
+	/* level of tree block */
+	unsigned int level:8;
+	/* 1 if the block is root of old snapshot */
+	unsigned int old_root:1;
+	/* 1 if no child blocks in the cache */
+	unsigned int lowest:1;
+	/* is the extent buffer locked */
+	unsigned int locked:1;
+	/* has the block been processed */
+	unsigned int processed:1;
+	/* have backrefs of this block been checked */
+	unsigned int checked:1;
+};
+
+/*
+ * present a block pointer in the backref cache
+ */
+struct backref_edge {
+	struct list_head list[2];
+	struct backref_node *node[2];
+	u64 blockptr;
+};
+
+#define LOWER	0
+#define UPPER	1
+
+struct backref_cache {
+	/* red black tree of all backref nodes in the cache */
+	struct rb_root rb_root;
+	/* list of backref nodes with no child block in the cache */
+	struct list_head pending[BTRFS_MAX_LEVEL];
+	spinlock_t lock;
+};
+
+/*
+ * map address of tree root to tree
+ */
+struct mapping_node {
+	struct rb_node rb_node;
+	u64 bytenr;
+	void *data;
+};
+
+struct mapping_tree {
+	struct rb_root rb_root;
+	spinlock_t lock;
+};
+
+/*
+ * present a tree block to process
+ */
+struct tree_block {
+	struct rb_node rb_node;
+	u64 bytenr;
+	struct btrfs_key key;
+	unsigned int level:8;
+	unsigned int key_ready:1;
+};
+
+/* inode vector */
+#define INODEVEC_SIZE 16
+
+struct inodevec {
+	struct list_head list;
+	struct inode *inode[INODEVEC_SIZE];
+	int nr;
+};
+
+struct reloc_control {
+	/* block group to relocate */
+	struct btrfs_block_group_cache *block_group;
+	/* extent tree */
+	struct btrfs_root *extent_root;
+	/* inode for moving data */
+	struct inode *data_inode;
+	struct btrfs_workers workers;
+	/* tree blocks have been processed */
+	struct extent_io_tree processed_blocks;
+	/* map start of tree root to corresponding reloc tree */
+	struct mapping_tree reloc_root_tree;
+	/* list of reloc trees */
+	struct list_head reloc_roots;
+	u64 search_start;
+	u64 extents_found;
+	u64 extents_skipped;
+	int stage;
+	int create_reloc_root;
+	unsigned int found_file_extent:1;
+	unsigned int found_old_snapshot:1;
+};
+
+/* stages of data relocation */
+#define MOVE_DATA_EXTENTS	0
+#define UPDATE_DATA_PTRS	1
+
+/*
+ * merge reloc tree to corresponding fs tree in worker threads
+ */
+struct async_merge {
+	struct btrfs_work work;
+	struct reloc_control *rc;
+	struct btrfs_root *root;
+	struct completion *done;
+	atomic_t *num_pending;
+};
+
+static void mapping_tree_init(struct mapping_tree *tree)
+{
+	tree->rb_root.rb_node = NULL;
+	spin_lock_init(&tree->lock);
+}
+
+static void backref_cache_init(struct backref_cache *cache)
+{
+	int i;
+	cache->rb_root.rb_node = NULL;
+	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
+		INIT_LIST_HEAD(&cache->pending[i]);
+	spin_lock_init(&cache->lock);
+}
+
+static void backref_node_init(struct backref_node *node)
+{
+	memset(node, 0, sizeof(*node));
+	INIT_LIST_HEAD(&node->upper);
+	INIT_LIST_HEAD(&node->lower);
+	RB_CLEAR_NODE(&node->rb_node);
+}
+
+static struct rb_node *tree_insert(struct rb_root *root, u64 bytenr,
+				   struct rb_node *node)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct tree_entry *entry;
+
+	while (*p) {
+		parent = *p;
+		entry = rb_entry(parent, struct tree_entry, rb_node);
+
+		if (bytenr < entry->bytenr)
+			p = &(*p)->rb_left;
+		else if (bytenr > entry->bytenr)
+			p = &(*p)->rb_right;
+		else
+			return parent;
+	}
+
+	rb_link_node(node, parent, p);
+	rb_insert_color(node, root);
+	return NULL;
+}
+
+static struct rb_node *tree_search(struct rb_root *root, u64 bytenr)
+{
+	struct rb_node *n = root->rb_node;
+	struct tree_entry *entry;
+
+	while (n) {
+		entry = rb_entry(n, struct tree_entry, rb_node);
+
+		if (bytenr < entry->bytenr)
+			n = n->rb_left;
+		else if (bytenr > entry->bytenr)
+			n = n->rb_right;
+		else
+			return n;
+	}
+	return NULL;
+}
+
+/*
+ * walk up backref nodes until reach node presents tree root
+ */
+static struct backref_node *walk_up_backref(struct backref_node *node,
+					    struct backref_edge *edges[],
+					    int *index)
+{
+	struct backref_edge *edge;
+	int idx = *index;
+
+	while (!list_empty(&node->upper)) {
+		edge = list_entry(node->upper.next,
+				  struct backref_edge, list[LOWER]);
+		edges[idx++] = edge;
+		node = edge->node[UPPER];
+	}
+	*index = idx;
+	return node;
+}
+
+/*
+ * walk down backref nodes to find start of next reference path
+ */
+static struct backref_node *walk_down_backref(struct backref_edge *edges[],
+					      int *index)
+{
+	struct backref_edge *edge;
+	struct backref_node *lower;
+	int idx = *index;
+
+	while (idx > 0) {
+		edge = edges[idx - 1];
+		lower = edge->node[LOWER];
+		if (list_is_last(&edge->list[LOWER], &lower->upper)) {
+			idx--;
+			continue;
+		}
+		edge = list_entry(edge->list[LOWER].next,
+				  struct backref_edge, list[LOWER]);
+		edges[idx - 1] = edge;
+		*index = idx;
+		return edge->node[UPPER];
+	}
+	*index = 0;
+	return NULL;
+}
+
+static void drop_node_buffer(struct backref_node *node)
+{
+	if (node->eb) {
+		if (node->locked) {
+			btrfs_tree_unlock(node->eb);
+			node->locked = 0;
+		}
+		free_extent_buffer(node->eb);
+		node->eb = NULL;
+	}
+}
+
+static void drop_backref_node(struct backref_cache *tree,
+			      struct backref_node *node)
+{
+	BUG_ON(!node->lowest);
+	BUG_ON(!list_empty(&node->upper));
+
+	drop_node_buffer(node);
+	list_del(&node->lower);
+
+	rb_erase(&node->rb_node, &tree->rb_root);
+	kfree(node);
+}
+
+/*
+ * remove a backref node from the backref cache
+ */
+static void remove_backref_node(struct backref_cache *cache,
+				struct backref_node *node)
+{
+	struct backref_node *upper;
+	struct backref_edge *edge;
+
+	if (!node)
+		return;
+
+	BUG_ON(!node->lowest);
+	while (!list_empty(&node->upper)) {
+		edge = list_entry(node->upper.next, struct backref_edge,
+				  list[LOWER]);
+		upper = edge->node[UPPER];
+		list_del(&edge->list[LOWER]);
+		list_del(&edge->list[UPPER]);
+		kfree(edge);
+		/*
+		 * add the node to pending list if no other
+		 * child block cached.
+		 */
+		if (list_empty(&upper->lower)) {
+			list_add_tail(&upper->lower,
+				      &cache->pending[upper->level]);
+			upper->lowest = 1;
+		}
+	}
+	drop_backref_node(cache, node);
+}
+
+/*
+ * find reloc tree by address of tree root
+ */
+static struct btrfs_root *find_reloc_root(struct reloc_control *rc,
+					  u64 bytenr)
+{
+	struct rb_node *rb_node;
+	struct mapping_node *node;
+	struct btrfs_root *root = NULL;
+
+	spin_lock(&rc->reloc_root_tree.lock);
+	rb_node = tree_search(&rc->reloc_root_tree.rb_root, bytenr);
+	if (rb_node) {
+		node = rb_entry(rb_node, struct mapping_node, rb_node);
+		root = (struct btrfs_root *)node->data;
+	}
+	spin_unlock(&rc->reloc_root_tree.lock);
+	return root;
+}
+
+static int is_cowonly_root(u64 root_objectid)
+{
+	if (root_objectid == BTRFS_ROOT_TREE_OBJECTID ||
+	    root_objectid == BTRFS_EXTENT_TREE_OBJECTID ||
+	    root_objectid == BTRFS_CHUNK_TREE_OBJECTID ||
+	    root_objectid == BTRFS_DEV_TREE_OBJECTID ||
+	    root_objectid == BTRFS_TREE_LOG_OBJECTID ||
+	    root_objectid == BTRFS_CSUM_TREE_OBJECTID)
+		return 1;
+	return 0;
+}
+
+static struct btrfs_root *read_fs_root(struct btrfs_fs_info *fs_info,
+					u64 root_objectid)
+{
+	struct btrfs_key key;
+
+	key.objectid = root_objectid;
+	key.type = BTRFS_ROOT_ITEM_KEY;
+	if (is_cowonly_root(root_objectid))
+		key.offset = 0;
+	else
+		key.offset = (u64)-1;
+
+	return btrfs_read_fs_root_no_name(fs_info, &key);
+}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static noinline_for_stack
+struct btrfs_root *find_tree_root(struct reloc_control *rc,
+				  struct extent_buffer *leaf,
+				  struct btrfs_extent_ref_v0 *ref0)
+{
+	struct btrfs_root *root;
+	u64 root_objectid = btrfs_ref_root_v0(leaf, ref0);
+	u64 generation = btrfs_ref_generation_v0(leaf, ref0);
+
+	BUG_ON(root_objectid == BTRFS_TREE_RELOC_OBJECTID);
+
+	root = read_fs_root(rc->extent_root->fs_info, root_objectid);
+	BUG_ON(IS_ERR(root));
+
+	if (root->ref_cows &&
+	    generation != btrfs_root_generation(&root->root_item))
+		return NULL;
+
+	return root;
+}
+#endif
+
+static noinline_for_stack
+int find_inline_backref(struct extent_buffer *leaf, int slot,
+			unsigned long *ptr, unsigned long *end)
+{
+	struct btrfs_extent_item *ei;
+	struct btrfs_tree_block_info *bi;
+	u32 item_size;
+
+	item_size = btrfs_item_size_nr(leaf, slot);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (item_size < sizeof(*ei)) {
+		WARN_ON(item_size != sizeof(struct btrfs_extent_item_v0));
+		return 1;
+	}
+#endif
+	ei = btrfs_item_ptr(leaf, slot, struct btrfs_extent_item);
+	WARN_ON(!(btrfs_extent_flags(leaf, ei) &
+		  BTRFS_EXTENT_FLAG_TREE_BLOCK));
+
+	if (item_size <= sizeof(*ei) + sizeof(*bi)) {
+		WARN_ON(item_size < sizeof(*ei) + sizeof(*bi));
+		return 1;
+	}
+
+	bi = (struct btrfs_tree_block_info *)(ei + 1);
+	*ptr = (unsigned long)(bi + 1);
+	*end = (unsigned long)ei + item_size;
+	return 0;
+}
+
+/*
+ * build backref tree for a given tree block. root of the backref tree
+ * corresponds the tree block, leaves of the backref tree correspond
+ * roots of b-trees that reference the tree block.
+ *
+ * the basic idea of this function is check backrefs of a given block
+ * to find upper level blocks that refernece the block, and then check
+ * bakcrefs of these upper level blocks recursively. the recursion stop
+ * when tree root is reached or backrefs for the block is cached.
+ *
+ * NOTE: if we find backrefs for a block are cached, we know backrefs
+ * for all upper level blocks that directly/indirectly reference the
+ * block are also cached.
+ */
+static struct backref_node *build_backref_tree(struct reloc_control *rc,
+					       struct backref_cache *cache,
+					       struct btrfs_key *node_key,
+					       int level, u64 bytenr)
+{
+	struct btrfs_path *path1;
+	struct btrfs_path *path2;
+	struct extent_buffer *eb;
+	struct btrfs_root *root;
+	struct backref_node *cur;
+	struct backref_node *upper;
+	struct backref_node *lower;
+	struct backref_node *node = NULL;
+	struct backref_node *exist = NULL;
+	struct backref_edge *edge;
+	struct rb_node *rb_node;
+	struct btrfs_key key;
+	unsigned long end;
+	unsigned long ptr;
+	LIST_HEAD(list);
+	int ret;
+	int err = 0;
+
+	path1 = btrfs_alloc_path();
+	path2 = btrfs_alloc_path();
+	if (!path1 || !path2) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	node = kmalloc(sizeof(*node), GFP_NOFS);
+	if (!node) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	backref_node_init(node);
+	node->bytenr = bytenr;
+	node->owner = 0;
+	node->level = level;
+	node->lowest = 1;
+	cur = node;
+again:
+	end = 0;
+	ptr = 0;
+	key.objectid = cur->bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = (u64)-1;
+
+	path1->search_commit_root = 1;
+	path1->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, rc->extent_root, &key, path1,
+				0, 0);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+	BUG_ON(!ret || !path1->slots[0]);
+
+	path1->slots[0]--;
+
+	WARN_ON(cur->checked);
+	if (!list_empty(&cur->upper)) {
+		/*
+		 * the backref was added previously when processsing
+		 * backref of type BTRFS_TREE_BLOCK_REF_KEY
+		 */
+		BUG_ON(!list_is_singular(&cur->upper));
+		edge = list_entry(cur->upper.next, struct backref_edge,
+				  list[LOWER]);
+		BUG_ON(!list_empty(&edge->list[UPPER]));
+		exist = edge->node[UPPER];
+		/*
+		 * add the upper level block to pending list if we need
+		 * check its backrefs
+		 */
+		if (!exist->checked)
+			list_add_tail(&edge->list[UPPER], &list);
+	} else {
+		exist = NULL;
+	}
+
+	while (1) {
+		cond_resched();
+		eb = path1->nodes[0];
+
+		if (ptr >= end) {
+			if (path1->slots[0] >= btrfs_header_nritems(eb)) {
+				ret = btrfs_next_leaf(rc->extent_root, path1);
+				if (ret < 0) {
+					err = ret;
+					goto out;
+				}
+				if (ret > 0)
+					break;
+				eb = path1->nodes[0];
+			}
+
+			btrfs_item_key_to_cpu(eb, &key, path1->slots[0]);
+			if (key.objectid != cur->bytenr) {
+				WARN_ON(exist);
+				break;
+			}
+
+			if (key.type == BTRFS_EXTENT_ITEM_KEY) {
+				ret = find_inline_backref(eb, path1->slots[0],
+							  &ptr, &end);
+				if (ret)
+					goto next;
+			}
+		}
+
+		if (ptr < end) {
+			/* update key for inline back ref */
+			struct btrfs_extent_inline_ref *iref;
+			iref = (struct btrfs_extent_inline_ref *)ptr;
+			key.type = btrfs_extent_inline_ref_type(eb, iref);
+			key.offset = btrfs_extent_inline_ref_offset(eb, iref);
+			WARN_ON(key.type != BTRFS_TREE_BLOCK_REF_KEY &&
+				key.type != BTRFS_SHARED_BLOCK_REF_KEY);
+		}
+
+		if (exist &&
+		    ((key.type == BTRFS_TREE_BLOCK_REF_KEY &&
+		      exist->owner == key.offset) ||
+		     (key.type == BTRFS_SHARED_BLOCK_REF_KEY &&
+		      exist->bytenr == key.offset))) {
+			exist = NULL;
+			goto next;
+		}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		if (key.type == BTRFS_SHARED_BLOCK_REF_KEY ||
+		    key.type == BTRFS_EXTENT_REF_V0_KEY) {
+			if (key.objectid == key.offset &&
+			    key.type == BTRFS_EXTENT_REF_V0_KEY) {
+				struct btrfs_extent_ref_v0 *ref0;
+				ref0 = btrfs_item_ptr(eb, path1->slots[0],
+						struct btrfs_extent_ref_v0);
+				root = find_tree_root(rc, eb, ref0);
+				if (root)
+					cur->root = root;
+				else
+					cur->old_root = 1;
+				break;
+			}
+#else
+		BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
+		if (key.type == BTRFS_SHARED_BLOCK_REF_KEY) {
+#endif
+			if (key.objectid == key.offset) {
+				/*
+				 * only root blocks of reloc trees use
+				 * backref of this type.
+				 */
+				root = find_reloc_root(rc, cur->bytenr);
+				BUG_ON(!root);
+				cur->root = root;
+				break;
+			}
+
+			edge = kzalloc(sizeof(*edge), GFP_NOFS);
+			if (!edge) {
+				err = -ENOMEM;
+				goto out;
+			}
+			rb_node = tree_search(&cache->rb_root, key.offset);
+			if (!rb_node) {
+				upper = kmalloc(sizeof(*upper), GFP_NOFS);
+				if (!upper) {
+					kfree(edge);
+					err = -ENOMEM;
+					goto out;
+				}
+				backref_node_init(upper);
+				upper->bytenr = key.offset;
+				upper->owner = 0;
+				upper->level = cur->level + 1;
+				/*
+				 *  backrefs for the upper level block isn't
+				 *  cached, add the block to pending list
+				 */
+				list_add_tail(&edge->list[UPPER], &list);
+			} else {
+				upper = rb_entry(rb_node, struct backref_node,
+						 rb_node);
+				INIT_LIST_HEAD(&edge->list[UPPER]);
+			}
+			list_add(&edge->list[LOWER], &cur->upper);
+			edge->node[UPPER] = upper;
+			edge->node[LOWER] = cur;
+
+			goto next;
+		} else if (key.type != BTRFS_TREE_BLOCK_REF_KEY) {
+			goto next;
+		}
+
+		/* key.type == BTRFS_TREE_BLOCK_REF_KEY */
+		root = read_fs_root(rc->extent_root->fs_info, key.offset);
+		if (IS_ERR(root)) {
+			err = PTR_ERR(root);
+			goto out;
+		}
+
+		if (btrfs_root_level(&root->root_item) == cur->level) {
+			/* tree root */
+			BUG_ON(btrfs_root_bytenr(&root->root_item) !=
+			       cur->bytenr);
+			cur->root = root;
+			break;
+		}
+
+		level = cur->level + 1;
+
+		/*
+		 * searching the tree to find upper level blocks
+		 * reference the block.
+		 */
+		path2->search_commit_root = 1;
+		path2->skip_locking = 1;
+		path2->lowest_level = level;
+		ret = btrfs_search_slot(NULL, root, node_key, path2, 0, 0);
+		path2->lowest_level = 0;
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+
+		eb = path2->nodes[level];
+		WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
+			cur->bytenr);
+
+		lower = cur;
+		for (; level < BTRFS_MAX_LEVEL; level++) {
+			if (!path2->nodes[level]) {
+				BUG_ON(btrfs_root_bytenr(&root->root_item) !=
+				       lower->bytenr);
+				lower->root = root;
+				break;
+			}
+
+			edge = kzalloc(sizeof(*edge), GFP_NOFS);
+			if (!edge) {
+				err = -ENOMEM;
+				goto out;
+			}
+
+			eb = path2->nodes[level];
+			rb_node = tree_search(&cache->rb_root, eb->start);
+			if (!rb_node) {
+				upper = kmalloc(sizeof(*upper), GFP_NOFS);
+				if (!upper) {
+					kfree(edge);
+					err = -ENOMEM;
+					goto out;
+				}
+				backref_node_init(upper);
+				upper->bytenr = eb->start;
+				upper->owner = btrfs_header_owner(eb);
+				upper->level = lower->level + 1;
+
+				/*
+				 * if we know the block isn't shared
+				 * we can void checking its backrefs.
+				 */
+				if (btrfs_block_can_be_shared(root, eb))
+					upper->checked = 0;
+				else
+					upper->checked = 1;
+
+				/*
+				 * add the block to pending list if we
+				 * need check its backrefs. only block
+				 * at 'cur->level + 1' is added to the
+				 * tail of pending list. this guarantees
+				 * we check backrefs from lower level
+				 * blocks to upper level blocks.
+				 */
+				if (!upper->checked &&
+				    level == cur->level + 1) {
+					list_add_tail(&edge->list[UPPER],
+						      &list);
+				} else
+					INIT_LIST_HEAD(&edge->list[UPPER]);
+			} else {
+				upper = rb_entry(rb_node, struct backref_node,
+						 rb_node);
+				BUG_ON(!upper->checked);
+				INIT_LIST_HEAD(&edge->list[UPPER]);
+			}
+			list_add_tail(&edge->list[LOWER], &lower->upper);
+			edge->node[UPPER] = upper;
+			edge->node[LOWER] = lower;
+
+			if (rb_node)
+				break;
+			lower = upper;
+			upper = NULL;
+		}
+		btrfs_release_path(root, path2);
+next:
+		if (ptr < end) {
+			ptr += btrfs_extent_inline_ref_size(key.type);
+			if (ptr >= end) {
+				WARN_ON(ptr > end);
+				ptr = 0;
+				end = 0;
+			}
+		}
+		if (ptr >= end)
+			path1->slots[0]++;
+	}
+	btrfs_release_path(rc->extent_root, path1);
+
+	cur->checked = 1;
+	WARN_ON(exist);
+
+	/* the pending list isn't empty, take the first block to process */
+	if (!list_empty(&list)) {
+		edge = list_entry(list.next, struct backref_edge, list[UPPER]);
+		list_del_init(&edge->list[UPPER]);
+		cur = edge->node[UPPER];
+		goto again;
+	}
+
+	/*
+	 * everything goes well, connect backref nodes and insert backref nodes
+	 * into the cache.
+	 */
+	BUG_ON(!node->checked);
+	rb_node = tree_insert(&cache->rb_root, node->bytenr, &node->rb_node);
+	BUG_ON(rb_node);
+
+	list_for_each_entry(edge, &node->upper, list[LOWER])
+		list_add_tail(&edge->list[UPPER], &list);
+
+	while (!list_empty(&list)) {
+		edge = list_entry(list.next, struct backref_edge, list[UPPER]);
+		list_del_init(&edge->list[UPPER]);
+		upper = edge->node[UPPER];
+
+		if (!RB_EMPTY_NODE(&upper->rb_node)) {
+			if (upper->lowest) {
+				list_del_init(&upper->lower);
+				upper->lowest = 0;
+			}
+
+			list_add_tail(&edge->list[UPPER], &upper->lower);
+			continue;
+		}
+
+		BUG_ON(!upper->checked);
+		rb_node = tree_insert(&cache->rb_root, upper->bytenr,
+				      &upper->rb_node);
+		BUG_ON(rb_node);
+
+		list_add_tail(&edge->list[UPPER], &upper->lower);
+
+		list_for_each_entry(edge, &upper->upper, list[LOWER])
+			list_add_tail(&edge->list[UPPER], &list);
+	}
+out:
+	btrfs_free_path(path1);
+	btrfs_free_path(path2);
+	if (err) {
+		INIT_LIST_HEAD(&list);
+		upper = node;
+		while (upper) {
+			if (RB_EMPTY_NODE(&upper->rb_node)) {
+				list_splice_tail(&upper->upper, &list);
+				kfree(upper);
+			}
+
+			if (list_empty(&list))
+				break;
+
+			edge = list_entry(list.next, struct backref_edge,
+					  list[LOWER]);
+			upper = edge->node[UPPER];
+			kfree(edge);
+		}
+		return ERR_PTR(err);
+	}
+	return node;
+}
+
+/*
+ * helper to add 'address of tree root -> reloc tree' mapping
+ */
+static int __add_reloc_root(struct btrfs_root *root)
+{
+	struct rb_node *rb_node;
+	struct mapping_node *node;
+	struct reloc_control *rc = root->fs_info->reloc_ctl;
+
+	node = kmalloc(sizeof(*node), GFP_NOFS);
+	BUG_ON(!node);
+
+	node->bytenr = root->node->start;
+	node->data = root;
+
+	spin_lock(&rc->reloc_root_tree.lock);
+	rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
+			      node->bytenr, &node->rb_node);
+	spin_unlock(&rc->reloc_root_tree.lock);
+	BUG_ON(rb_node);
+
+	list_add_tail(&root->root_list, &rc->reloc_roots);
+	return 0;
+}
+
+/*
+ * helper to update/delete the 'address of tree root -> reloc tree'
+ * mapping
+ */
+static int __update_reloc_root(struct btrfs_root *root, int del)
+{
+	struct rb_node *rb_node;
+	struct mapping_node *node = NULL;
+	struct reloc_control *rc = root->fs_info->reloc_ctl;
+
+	spin_lock(&rc->reloc_root_tree.lock);
+	rb_node = tree_search(&rc->reloc_root_tree.rb_root,
+			      root->commit_root->start);
+	if (rb_node) {
+		node = rb_entry(rb_node, struct mapping_node, rb_node);
+		rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
+	}
+	spin_unlock(&rc->reloc_root_tree.lock);
+
+	BUG_ON((struct btrfs_root *)node->data != root);
+
+	if (!del) {
+		spin_lock(&rc->reloc_root_tree.lock);
+		node->bytenr = root->node->start;
+		rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
+				      node->bytenr, &node->rb_node);
+		spin_unlock(&rc->reloc_root_tree.lock);
+		BUG_ON(rb_node);
+	} else {
+		list_del_init(&root->root_list);
+		kfree(node);
+	}
+	return 0;
+}
+
+/*
+ * create reloc tree for a given fs tree. reloc tree is just a
+ * snapshot of the fs tree with special root objectid.
+ */
+int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *root)
+{
+	struct btrfs_root *reloc_root;
+	struct extent_buffer *eb;
+	struct btrfs_root_item *root_item;
+	struct btrfs_key root_key;
+	int ret;
+
+	if (root->reloc_root) {
+		reloc_root = root->reloc_root;
+		reloc_root->last_trans = trans->transid;
+		return 0;
+	}
+
+	if (!root->fs_info->reloc_ctl ||
+	    !root->fs_info->reloc_ctl->create_reloc_root ||
+	    root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		return 0;
+
+	root_item = kmalloc(sizeof(*root_item), GFP_NOFS);
+	BUG_ON(!root_item);
+
+	root_key.objectid = BTRFS_TREE_RELOC_OBJECTID;
+	root_key.type = BTRFS_ROOT_ITEM_KEY;
+	root_key.offset = root->root_key.objectid;
+
+	ret = btrfs_copy_root(trans, root, root->commit_root, &eb,
+			      BTRFS_TREE_RELOC_OBJECTID);
+	BUG_ON(ret);
+
+	btrfs_set_root_last_snapshot(&root->root_item, trans->transid - 1);
+	memcpy(root_item, &root->root_item, sizeof(*root_item));
+	btrfs_set_root_refs(root_item, 1);
+	btrfs_set_root_bytenr(root_item, eb->start);
+	btrfs_set_root_level(root_item, btrfs_header_level(eb));
+	btrfs_set_root_generation(root_item, trans->transid);
+	memset(&root_item->drop_progress, 0, sizeof(struct btrfs_disk_key));
+	root_item->drop_level = 0;
+
+	btrfs_tree_unlock(eb);
+	free_extent_buffer(eb);
+
+	ret = btrfs_insert_root(trans, root->fs_info->tree_root,
+				&root_key, root_item);
+	BUG_ON(ret);
+	kfree(root_item);
+
+	reloc_root = btrfs_read_fs_root_no_radix(root->fs_info->tree_root,
+						 &root_key);
+	BUG_ON(IS_ERR(reloc_root));
+	reloc_root->last_trans = trans->transid;
+
+	__add_reloc_root(reloc_root);
+	root->reloc_root = reloc_root;
+	return 0;
+}
+
+/*
+ * update root item of reloc tree
+ */
+int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
+			    struct btrfs_root *root)
+{
+	struct btrfs_root *reloc_root;
+	struct btrfs_root_item *root_item;
+	int del = 0;
+	int ret;
+
+	if (!root->reloc_root)
+		return 0;
+
+	reloc_root = root->reloc_root;
+	root_item = &reloc_root->root_item;
+
+	if (btrfs_root_refs(root_item) == 0) {
+		root->reloc_root = NULL;
+		del = 1;
+	}
+
+	__update_reloc_root(reloc_root, del);
+
+	if (reloc_root->commit_root != reloc_root->node) {
+		btrfs_set_root_node(root_item, reloc_root->node);
+		free_extent_buffer(reloc_root->commit_root);
+		reloc_root->commit_root = btrfs_root_node(reloc_root);
+	}
+
+	ret = btrfs_update_root(trans, root->fs_info->tree_root,
+				&reloc_root->root_key, root_item);
+	BUG_ON(ret);
+	return 0;
+}
+
+/*
+ * helper to find first cached inode with inode number >= objectid
+ * in a subvolume
+ */
+static struct inode *find_next_inode(struct btrfs_root *root, u64 objectid)
+{
+	struct rb_node *node;
+	struct rb_node *prev;
+	struct btrfs_inode *entry;
+	struct inode *inode;
+
+	spin_lock(&root->inode_lock);
+again:
+	node = root->inode_tree.rb_node;
+	prev = NULL;
+	while (node) {
+		prev = node;
+		entry = rb_entry(node, struct btrfs_inode, rb_node);
+
+		if (objectid < entry->vfs_inode.i_ino)
+			node = node->rb_left;
+		else if (objectid > entry->vfs_inode.i_ino)
+			node = node->rb_right;
+		else
+			break;
+	}
+	if (!node) {
+		while (prev) {
+			entry = rb_entry(prev, struct btrfs_inode, rb_node);
+			if (objectid <= entry->vfs_inode.i_ino) {
+				node = prev;
+				break;
+			}
+			prev = rb_next(prev);
+		}
+	}
+	while (node) {
+		entry = rb_entry(node, struct btrfs_inode, rb_node);
+		inode = igrab(&entry->vfs_inode);
+		if (inode) {
+			spin_unlock(&root->inode_lock);
+			return inode;
+		}
+
+		objectid = entry->vfs_inode.i_ino + 1;
+		if (cond_resched_lock(&root->inode_lock))
+			goto again;
+
+		node = rb_next(node);
+	}
+	spin_unlock(&root->inode_lock);
+	return NULL;
+}
+
+static int in_block_group(u64 bytenr,
+			  struct btrfs_block_group_cache *block_group)
+{
+	if (bytenr >= block_group->key.objectid &&
+	    bytenr < block_group->key.objectid + block_group->key.offset)
+		return 1;
+	return 0;
+}
+
+/*
+ * get new location of data
+ */
+static int get_new_location(struct inode *reloc_inode, u64 *new_bytenr,
+			    u64 bytenr, u64 num_bytes)
+{
+	struct btrfs_root *root = BTRFS_I(reloc_inode)->root;
+	struct btrfs_path *path;
+	struct btrfs_file_extent_item *fi;
+	struct extent_buffer *leaf;
+	int ret;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	bytenr -= BTRFS_I(reloc_inode)->index_cnt;
+	ret = btrfs_lookup_file_extent(NULL, root, path, reloc_inode->i_ino,
+				       bytenr, 0);
+	if (ret < 0)
+		goto out;
+	if (ret > 0) {
+		ret = -ENOENT;
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	fi = btrfs_item_ptr(leaf, path->slots[0],
+			    struct btrfs_file_extent_item);
+
+	BUG_ON(btrfs_file_extent_offset(leaf, fi) ||
+	       btrfs_file_extent_compression(leaf, fi) ||
+	       btrfs_file_extent_encryption(leaf, fi) ||
+	       btrfs_file_extent_other_encoding(leaf, fi));
+
+	if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
+		ret = 1;
+		goto out;
+	}
+
+	if (new_bytenr)
+		*new_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+	ret = 0;
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * update file extent items in the tree leaf to point to
+ * the new locations.
+ */
+static int replace_file_extents(struct btrfs_trans_handle *trans,
+				struct reloc_control *rc,
+				struct btrfs_root *root,
+				struct extent_buffer *leaf,
+				struct list_head *inode_list)
+{
+	struct btrfs_key key;
+	struct btrfs_file_extent_item *fi;
+	struct inode *inode = NULL;
+	struct inodevec *ivec = NULL;
+	u64 parent;
+	u64 bytenr;
+	u64 new_bytenr;
+	u64 num_bytes;
+	u64 end;
+	u32 nritems;
+	u32 i;
+	int ret;
+	int first = 1;
+	int dirty = 0;
+
+	if (rc->stage != UPDATE_DATA_PTRS)
+		return 0;
+
+	/* reloc trees always use full backref */
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+		parent = leaf->start;
+	else
+		parent = 0;
+
+	nritems = btrfs_header_nritems(leaf);
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		btrfs_item_key_to_cpu(leaf, &key, i);
+		if (key.type != BTRFS_EXTENT_DATA_KEY)
+			continue;
+		fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
+		if (btrfs_file_extent_type(leaf, fi) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			continue;
+		bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+		num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
+		if (bytenr == 0)
+			continue;
+		if (!in_block_group(bytenr, rc->block_group))
+			continue;
+
+		/*
+		 * if we are modifying block in fs tree, wait for readpage
+		 * to complete and drop the extent cache
+		 */
+		if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID) {
+			if (!ivec || ivec->nr == INODEVEC_SIZE) {
+				ivec = kmalloc(sizeof(*ivec), GFP_NOFS);
+				BUG_ON(!ivec);
+				ivec->nr = 0;
+				list_add_tail(&ivec->list, inode_list);
+			}
+			if (first) {
+				inode = find_next_inode(root, key.objectid);
+				if (inode)
+					ivec->inode[ivec->nr++] = inode;
+				first = 0;
+			} else if (inode && inode->i_ino < key.objectid) {
+				inode = find_next_inode(root, key.objectid);
+				if (inode)
+					ivec->inode[ivec->nr++] = inode;
+			}
+			if (inode && inode->i_ino == key.objectid) {
+				end = key.offset +
+				      btrfs_file_extent_num_bytes(leaf, fi);
+				WARN_ON(!IS_ALIGNED(key.offset,
+						    root->sectorsize));
+				WARN_ON(!IS_ALIGNED(end, root->sectorsize));
+				end--;
+				ret = try_lock_extent(&BTRFS_I(inode)->io_tree,
+						      key.offset, end,
+						      GFP_NOFS);
+				if (!ret)
+					continue;
+
+				btrfs_drop_extent_cache(inode, key.offset, end,
+							1);
+				unlock_extent(&BTRFS_I(inode)->io_tree,
+					      key.offset, end, GFP_NOFS);
+			}
+		}
+
+		ret = get_new_location(rc->data_inode, &new_bytenr,
+				       bytenr, num_bytes);
+		if (ret > 0)
+			continue;
+		BUG_ON(ret < 0);
+
+		btrfs_set_file_extent_disk_bytenr(leaf, fi, new_bytenr);
+		dirty = 1;
+
+		key.offset -= btrfs_file_extent_offset(leaf, fi);
+		ret = btrfs_inc_extent_ref(trans, root, new_bytenr,
+					   num_bytes, parent,
+					   btrfs_header_owner(leaf),
+					   key.objectid, key.offset);
+		BUG_ON(ret);
+
+		ret = btrfs_free_extent(trans, root, bytenr, num_bytes,
+					parent, btrfs_header_owner(leaf),
+					key.objectid, key.offset);
+		BUG_ON(ret);
+	}
+	if (dirty)
+		btrfs_mark_buffer_dirty(leaf);
+	return 0;
+}
+
+static noinline_for_stack
+int memcmp_node_keys(struct extent_buffer *eb, int slot,
+		     struct btrfs_path *path, int level)
+{
+	struct btrfs_disk_key key1;
+	struct btrfs_disk_key key2;
+	btrfs_node_key(eb, &key1, slot);
+	btrfs_node_key(path->nodes[level], &key2, path->slots[level]);
+	return memcmp(&key1, &key2, sizeof(key1));
+}
+
+/*
+ * try to replace tree blocks in fs tree with the new blocks
+ * in reloc tree. tree blocks haven't been modified since the
+ * reloc tree was create can be replaced.
+ *
+ * if a block was replaced, level of the block + 1 is returned.
+ * if no block got replaced, 0 is returned. if there are other
+ * errors, a negative error number is returned.
+ */
+static int replace_path(struct btrfs_trans_handle *trans,
+			struct btrfs_root *dest, struct btrfs_root *src,
+			struct btrfs_path *path, struct btrfs_key *next_key,
+			struct extent_buffer **leaf,
+			int lowest_level, int max_level)
+{
+	struct extent_buffer *eb;
+	struct extent_buffer *parent;
+	struct btrfs_key key;
+	u64 old_bytenr;
+	u64 new_bytenr;
+	u64 old_ptr_gen;
+	u64 new_ptr_gen;
+	u64 last_snapshot;
+	u32 blocksize;
+	int level;
+	int ret;
+	int slot;
+
+	BUG_ON(src->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
+	BUG_ON(dest->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
+	BUG_ON(lowest_level > 1 && leaf);
+
+	last_snapshot = btrfs_root_last_snapshot(&src->root_item);
+
+	slot = path->slots[lowest_level];
+	btrfs_node_key_to_cpu(path->nodes[lowest_level], &key, slot);
+
+	eb = btrfs_lock_root_node(dest);
+	btrfs_set_lock_blocking(eb);
+	level = btrfs_header_level(eb);
+
+	if (level < lowest_level) {
+		btrfs_tree_unlock(eb);
+		free_extent_buffer(eb);
+		return 0;
+	}
+
+	ret = btrfs_cow_block(trans, dest, eb, NULL, 0, &eb);
+	BUG_ON(ret);
+	btrfs_set_lock_blocking(eb);
+
+	if (next_key) {
+		next_key->objectid = (u64)-1;
+		next_key->type = (u8)-1;
+		next_key->offset = (u64)-1;
+	}
+
+	parent = eb;
+	while (1) {
+		level = btrfs_header_level(parent);
+		BUG_ON(level < lowest_level);
+
+		ret = btrfs_bin_search(parent, &key, level, &slot);
+		if (ret && slot > 0)
+			slot--;
+
+		if (next_key && slot + 1 < btrfs_header_nritems(parent))
+			btrfs_node_key_to_cpu(parent, next_key, slot + 1);
+
+		old_bytenr = btrfs_node_blockptr(parent, slot);
+		blocksize = btrfs_level_size(dest, level - 1);
+		old_ptr_gen = btrfs_node_ptr_generation(parent, slot);
+
+		if (level <= max_level) {
+			eb = path->nodes[level];
+			new_bytenr = btrfs_node_blockptr(eb,
+							path->slots[level]);
+			new_ptr_gen = btrfs_node_ptr_generation(eb,
+							path->slots[level]);
+		} else {
+			new_bytenr = 0;
+			new_ptr_gen = 0;
+		}
+
+		if (new_bytenr > 0 && new_bytenr == old_bytenr) {
+			WARN_ON(1);
+			ret = level;
+			break;
+		}
+
+		if (new_bytenr == 0 || old_ptr_gen > last_snapshot ||
+		    memcmp_node_keys(parent, slot, path, level)) {
+			if (level <= lowest_level && !leaf) {
+				ret = 0;
+				break;
+			}
+
+			eb = read_tree_block(dest, old_bytenr, blocksize,
+					     old_ptr_gen);
+			btrfs_tree_lock(eb);
+			ret = btrfs_cow_block(trans, dest, eb, parent,
+					      slot, &eb);
+			BUG_ON(ret);
+			btrfs_set_lock_blocking(eb);
+
+			if (level <= lowest_level) {
+				*leaf = eb;
+				ret = 0;
+				break;
+			}
+
+			btrfs_tree_unlock(parent);
+			free_extent_buffer(parent);
+
+			parent = eb;
+			continue;
+		}
+
+		btrfs_node_key_to_cpu(path->nodes[level], &key,
+				      path->slots[level]);
+		btrfs_release_path(src, path);
+
+		path->lowest_level = level;
+		ret = btrfs_search_slot(trans, src, &key, path, 0, 1);
+		path->lowest_level = 0;
+		BUG_ON(ret);
+
+		/*
+		 * swap blocks in fs tree and reloc tree.
+		 */
+		btrfs_set_node_blockptr(parent, slot, new_bytenr);
+		btrfs_set_node_ptr_generation(parent, slot, new_ptr_gen);
+		btrfs_mark_buffer_dirty(parent);
+
+		btrfs_set_node_blockptr(path->nodes[level],
+					path->slots[level], old_bytenr);
+		btrfs_set_node_ptr_generation(path->nodes[level],
+					      path->slots[level], old_ptr_gen);
+		btrfs_mark_buffer_dirty(path->nodes[level]);
+
+		ret = btrfs_inc_extent_ref(trans, src, old_bytenr, blocksize,
+					path->nodes[level]->start,
+					src->root_key.objectid, level - 1, 0);
+		BUG_ON(ret);
+		ret = btrfs_inc_extent_ref(trans, dest, new_bytenr, blocksize,
+					0, dest->root_key.objectid, level - 1,
+					0);
+		BUG_ON(ret);
+
+		ret = btrfs_free_extent(trans, src, new_bytenr, blocksize,
+					path->nodes[level]->start,
+					src->root_key.objectid, level - 1, 0);
+		BUG_ON(ret);
+
+		ret = btrfs_free_extent(trans, dest, old_bytenr, blocksize,
+					0, dest->root_key.objectid, level - 1,
+					0);
+		BUG_ON(ret);
+
+		btrfs_unlock_up_safe(path, 0);
+
+		ret = level;
+		break;
+	}
+	btrfs_tree_unlock(parent);
+	free_extent_buffer(parent);
+	return ret;
+}
+
+/*
+ * helper to find next relocated block in reloc tree
+ */
+static noinline_for_stack
+int walk_up_reloc_tree(struct btrfs_root *root, struct btrfs_path *path,
+		       int *level)
+{
+	struct extent_buffer *eb;
+	int i;
+	u64 last_snapshot;
+	u32 nritems;
+
+	last_snapshot = btrfs_root_last_snapshot(&root->root_item);
+
+	for (i = 0; i < *level; i++) {
+		free_extent_buffer(path->nodes[i]);
+		path->nodes[i] = NULL;
+	}
+
+	for (i = *level; i < BTRFS_MAX_LEVEL && path->nodes[i]; i++) {
+		eb = path->nodes[i];
+		nritems = btrfs_header_nritems(eb);
+		while (path->slots[i] + 1 < nritems) {
+			path->slots[i]++;
+			if (btrfs_node_ptr_generation(eb, path->slots[i]) <=
+			    last_snapshot)
+				continue;
+
+			*level = i;
+			return 0;
+		}
+		free_extent_buffer(path->nodes[i]);
+		path->nodes[i] = NULL;
+	}
+	return 1;
+}
+
+/*
+ * walk down reloc tree to find relocated block of lowest level
+ */
+static noinline_for_stack
+int walk_down_reloc_tree(struct btrfs_root *root, struct btrfs_path *path,
+			 int *level)
+{
+	struct extent_buffer *eb = NULL;
+	int i;
+	u64 bytenr;
+	u64 ptr_gen = 0;
+	u64 last_snapshot;
+	u32 blocksize;
+	u32 nritems;
+
+	last_snapshot = btrfs_root_last_snapshot(&root->root_item);
+
+	for (i = *level; i > 0; i--) {
+		eb = path->nodes[i];
+		nritems = btrfs_header_nritems(eb);
+		while (path->slots[i] < nritems) {
+			ptr_gen = btrfs_node_ptr_generation(eb, path->slots[i]);
+			if (ptr_gen > last_snapshot)
+				break;
+			path->slots[i]++;
+		}
+		if (path->slots[i] >= nritems) {
+			if (i == *level)
+				break;
+			*level = i + 1;
+			return 0;
+		}
+		if (i == 1) {
+			*level = i;
+			return 0;
+		}
+
+		bytenr = btrfs_node_blockptr(eb, path->slots[i]);
+		blocksize = btrfs_level_size(root, i - 1);
+		eb = read_tree_block(root, bytenr, blocksize, ptr_gen);
+		BUG_ON(btrfs_header_level(eb) != i - 1);
+		path->nodes[i - 1] = eb;
+		path->slots[i - 1] = 0;
+	}
+	return 1;
+}
+
+/*
+ * invalidate extent cache for file extents whose key in range of
+ * [min_key, max_key)
+ */
+static int invalidate_extent_cache(struct btrfs_root *root,
+				   struct btrfs_key *min_key,
+				   struct btrfs_key *max_key)
+{
+	struct inode *inode = NULL;
+	u64 objectid;
+	u64 start, end;
+
+	objectid = min_key->objectid;
+	while (1) {
+		cond_resched();
+		iput(inode);
+
+		if (objectid > max_key->objectid)
+			break;
+
+		inode = find_next_inode(root, objectid);
+		if (!inode)
+			break;
+
+		if (inode->i_ino > max_key->objectid) {
+			iput(inode);
+			break;
+		}
+
+		objectid = inode->i_ino + 1;
+		if (!S_ISREG(inode->i_mode))
+			continue;
+
+		if (unlikely(min_key->objectid == inode->i_ino)) {
+			if (min_key->type > BTRFS_EXTENT_DATA_KEY)
+				continue;
+			if (min_key->type < BTRFS_EXTENT_DATA_KEY)
+				start = 0;
+			else {
+				start = min_key->offset;
+				WARN_ON(!IS_ALIGNED(start, root->sectorsize));
+			}
+		} else {
+			start = 0;
+		}
+
+		if (unlikely(max_key->objectid == inode->i_ino)) {
+			if (max_key->type < BTRFS_EXTENT_DATA_KEY)
+				continue;
+			if (max_key->type > BTRFS_EXTENT_DATA_KEY) {
+				end = (u64)-1;
+			} else {
+				if (max_key->offset == 0)
+					continue;
+				end = max_key->offset;
+				WARN_ON(!IS_ALIGNED(end, root->sectorsize));
+				end--;
+			}
+		} else {
+			end = (u64)-1;
+		}
+
+		/* the lock_extent waits for readpage to complete */
+		lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+		btrfs_drop_extent_cache(inode, start, end, 1);
+		unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+	}
+	return 0;
+}
+
+static int find_next_key(struct btrfs_path *path, int level,
+			 struct btrfs_key *key)
+
+{
+	while (level < BTRFS_MAX_LEVEL) {
+		if (!path->nodes[level])
+			break;
+		if (path->slots[level] + 1 <
+		    btrfs_header_nritems(path->nodes[level])) {
+			btrfs_node_key_to_cpu(path->nodes[level], key,
+					      path->slots[level] + 1);
+			return 0;
+		}
+		level++;
+	}
+	return 1;
+}
+
+/*
+ * merge the relocated tree blocks in reloc tree with corresponding
+ * fs tree.
+ */
+static noinline_for_stack int merge_reloc_root(struct reloc_control *rc,
+					       struct btrfs_root *root)
+{
+	LIST_HEAD(inode_list);
+	struct btrfs_key key;
+	struct btrfs_key next_key;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *reloc_root;
+	struct btrfs_root_item *root_item;
+	struct btrfs_path *path;
+	struct extent_buffer *leaf = NULL;
+	unsigned long nr;
+	int level;
+	int max_level;
+	int replaced = 0;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	reloc_root = root->reloc_root;
+	root_item = &reloc_root->root_item;
+
+	if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
+		level = btrfs_root_level(root_item);
+		extent_buffer_get(reloc_root->node);
+		path->nodes[level] = reloc_root->node;
+		path->slots[level] = 0;
+	} else {
+		btrfs_disk_key_to_cpu(&key, &root_item->drop_progress);
+
+		level = root_item->drop_level;
+		BUG_ON(level == 0);
+		path->lowest_level = level;
+		ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+		if (ret < 0) {
+			btrfs_free_path(path);
+			return ret;
+		}
+
+		btrfs_node_key_to_cpu(path->nodes[level], &next_key,
+				      path->slots[level]);
+		WARN_ON(memcmp(&key, &next_key, sizeof(key)));
+
+		btrfs_unlock_up_safe(path, 0);
+	}
+
+	if (level == 0 && rc->stage == UPDATE_DATA_PTRS) {
+		trans = btrfs_start_transaction(root, 1);
+
+		leaf = path->nodes[0];
+		btrfs_item_key_to_cpu(leaf, &key, 0);
+		btrfs_release_path(reloc_root, path);
+
+		ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+
+		leaf = path->nodes[0];
+		btrfs_unlock_up_safe(path, 1);
+		ret = replace_file_extents(trans, rc, root, leaf,
+					   &inode_list);
+		if (ret < 0)
+			err = ret;
+		goto out;
+	}
+
+	memset(&next_key, 0, sizeof(next_key));
+
+	while (1) {
+		leaf = NULL;
+		replaced = 0;
+		trans = btrfs_start_transaction(root, 1);
+		max_level = level;
+
+		ret = walk_down_reloc_tree(reloc_root, path, &level);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		if (ret > 0)
+			break;
+
+		if (!find_next_key(path, level, &key) &&
+		    btrfs_comp_cpu_keys(&next_key, &key) >= 0) {
+			ret = 0;
+		} else if (level == 1 && rc->stage == UPDATE_DATA_PTRS) {
+			ret = replace_path(trans, root, reloc_root,
+					   path, &next_key, &leaf,
+					   level, max_level);
+		} else {
+			ret = replace_path(trans, root, reloc_root,
+					   path, &next_key, NULL,
+					   level, max_level);
+		}
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+
+		if (ret > 0) {
+			level = ret;
+			btrfs_node_key_to_cpu(path->nodes[level], &key,
+					      path->slots[level]);
+			replaced = 1;
+		} else if (leaf) {
+			/*
+			 * no block got replaced, try replacing file extents
+			 */
+			btrfs_item_key_to_cpu(leaf, &key, 0);
+			ret = replace_file_extents(trans, rc, root, leaf,
+						   &inode_list);
+			btrfs_tree_unlock(leaf);
+			free_extent_buffer(leaf);
+			BUG_ON(ret < 0);
+		}
+
+		ret = walk_up_reloc_tree(reloc_root, path, &level);
+		if (ret > 0)
+			break;
+
+		BUG_ON(level == 0);
+		/*
+		 * save the merging progress in the drop_progress.
+		 * this is OK since root refs == 1 in this case.
+		 */
+		btrfs_node_key(path->nodes[level], &root_item->drop_progress,
+			       path->slots[level]);
+		root_item->drop_level = level;
+
+		nr = trans->blocks_used;
+		btrfs_end_transaction(trans, root);
+
+		btrfs_btree_balance_dirty(root, nr);
+
+		if (replaced && rc->stage == UPDATE_DATA_PTRS)
+			invalidate_extent_cache(root, &key, &next_key);
+	}
+
+	/*
+	 * handle the case only one block in the fs tree need to be
+	 * relocated and the block is tree root.
+	 */
+	leaf = btrfs_lock_root_node(root);
+	ret = btrfs_cow_block(trans, root, leaf, NULL, 0, &leaf);
+	btrfs_tree_unlock(leaf);
+	free_extent_buffer(leaf);
+	if (ret < 0)
+		err = ret;
+out:
+	btrfs_free_path(path);
+
+	if (err == 0) {
+		memset(&root_item->drop_progress, 0,
+		       sizeof(root_item->drop_progress));
+		root_item->drop_level = 0;
+		btrfs_set_root_refs(root_item, 0);
+	}
+
+	nr = trans->blocks_used;
+	btrfs_end_transaction(trans, root);
+
+	btrfs_btree_balance_dirty(root, nr);
+
+	/*
+	 * put inodes while we aren't holding the tree locks
+	 */
+	while (!list_empty(&inode_list)) {
+		struct inodevec *ivec;
+		ivec = list_entry(inode_list.next, struct inodevec, list);
+		list_del(&ivec->list);
+		while (ivec->nr > 0) {
+			ivec->nr--;
+			iput(ivec->inode[ivec->nr]);
+		}
+		kfree(ivec);
+	}
+
+	if (replaced && rc->stage == UPDATE_DATA_PTRS)
+		invalidate_extent_cache(root, &key, &next_key);
+
+	return err;
+}
+
+/*
+ * callback for the work threads.
+ * this function merges reloc tree with corresponding fs tree,
+ * and then drops the reloc tree.
+ */
+static void merge_func(struct btrfs_work *work)
+{
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *root;
+	struct btrfs_root *reloc_root;
+	struct async_merge *async;
+
+	async = container_of(work, struct async_merge, work);
+	reloc_root = async->root;
+
+	if (btrfs_root_refs(&reloc_root->root_item) > 0) {
+		root = read_fs_root(reloc_root->fs_info,
+				    reloc_root->root_key.offset);
+		BUG_ON(IS_ERR(root));
+		BUG_ON(root->reloc_root != reloc_root);
+
+		merge_reloc_root(async->rc, root);
+
+		trans = btrfs_start_transaction(root, 1);
+		btrfs_update_reloc_root(trans, root);
+		btrfs_end_transaction(trans, root);
+	}
+
+	btrfs_drop_dead_root(reloc_root);
+
+	if (atomic_dec_and_test(async->num_pending))
+		complete(async->done);
+
+	kfree(async);
+}
+
+static int merge_reloc_roots(struct reloc_control *rc)
+{
+	struct async_merge *async;
+	struct btrfs_root *root;
+	struct completion done;
+	atomic_t num_pending;
+
+	init_completion(&done);
+	atomic_set(&num_pending, 1);
+
+	while (!list_empty(&rc->reloc_roots)) {
+		root = list_entry(rc->reloc_roots.next,
+				  struct btrfs_root, root_list);
+		list_del_init(&root->root_list);
+
+		async = kmalloc(sizeof(*async), GFP_NOFS);
+		BUG_ON(!async);
+		async->work.func = merge_func;
+		async->work.flags = 0;
+		async->rc = rc;
+		async->root = root;
+		async->done = &done;
+		async->num_pending = &num_pending;
+		atomic_inc(&num_pending);
+		btrfs_queue_worker(&rc->workers, &async->work);
+	}
+
+	if (!atomic_dec_and_test(&num_pending))
+		wait_for_completion(&done);
+
+	BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
+	return 0;
+}
+
+static void free_block_list(struct rb_root *blocks)
+{
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	while ((rb_node = rb_first(blocks))) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+		rb_erase(rb_node, blocks);
+		kfree(block);
+	}
+}
+
+static int record_reloc_root_in_trans(struct btrfs_trans_handle *trans,
+				      struct btrfs_root *reloc_root)
+{
+	struct btrfs_root *root;
+
+	if (reloc_root->last_trans == trans->transid)
+		return 0;
+
+	root = read_fs_root(reloc_root->fs_info, reloc_root->root_key.offset);
+	BUG_ON(IS_ERR(root));
+	BUG_ON(root->reloc_root != reloc_root);
+
+	return btrfs_record_root_in_trans(trans, root);
+}
+
+/*
+ * select one tree from trees that references the block.
+ * for blocks in refernce counted trees, we preper reloc tree.
+ * if no reloc tree found and reloc_only is true, NULL is returned.
+ */
+static struct btrfs_root *__select_one_root(struct btrfs_trans_handle *trans,
+					    struct backref_node *node,
+					    struct backref_edge *edges[],
+					    int *nr, int reloc_only)
+{
+	struct backref_node *next;
+	struct btrfs_root *root;
+	int index;
+	int loop = 0;
+again:
+	index = 0;
+	next = node;
+	while (1) {
+		cond_resched();
+		next = walk_up_backref(next, edges, &index);
+		root = next->root;
+		if (!root) {
+			BUG_ON(!node->old_root);
+			goto skip;
+		}
+
+		/* no other choice for non-refernce counted tree */
+		if (!root->ref_cows) {
+			BUG_ON(reloc_only);
+			break;
+		}
+
+		if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
+			record_reloc_root_in_trans(trans, root);
+			break;
+		}
+
+		if (loop) {
+			btrfs_record_root_in_trans(trans, root);
+			break;
+		}
+
+		if (reloc_only || next != node) {
+			if (!root->reloc_root)
+				btrfs_record_root_in_trans(trans, root);
+			root = root->reloc_root;
+			/*
+			 * if the reloc tree was created in current
+			 * transation, there is no node in backref tree
+			 * corresponds to the root of the reloc tree.
+			 */
+			if (btrfs_root_last_snapshot(&root->root_item) ==
+			    trans->transid - 1)
+				break;
+		}
+skip:
+		root = NULL;
+		next = walk_down_backref(edges, &index);
+		if (!next || next->level <= node->level)
+			break;
+	}
+
+	if (!root && !loop && !reloc_only) {
+		loop = 1;
+		goto again;
+	}
+
+	if (root)
+		*nr = index;
+	else
+		*nr = 0;
+
+	return root;
+}
+
+static noinline_for_stack
+struct btrfs_root *select_one_root(struct btrfs_trans_handle *trans,
+				   struct backref_node *node)
+{
+	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	int nr;
+	return __select_one_root(trans, node, edges, &nr, 0);
+}
+
+static noinline_for_stack
+struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
+				     struct backref_node *node,
+				     struct backref_edge *edges[], int *nr)
+{
+	return __select_one_root(trans, node, edges, nr, 1);
+}
+
+static void grab_path_buffers(struct btrfs_path *path,
+			      struct backref_node *node,
+			      struct backref_edge *edges[], int nr)
+{
+	int i = 0;
+	while (1) {
+		drop_node_buffer(node);
+		node->eb = path->nodes[node->level];
+		BUG_ON(!node->eb);
+		if (path->locks[node->level])
+			node->locked = 1;
+		path->nodes[node->level] = NULL;
+		path->locks[node->level] = 0;
+
+		if (i >= nr)
+			break;
+
+		edges[i]->blockptr = node->eb->start;
+		node = edges[i]->node[UPPER];
+		i++;
+	}
+}
+
+/*
+ * relocate a block tree, and then update pointers in upper level
+ * blocks that reference the block to point to the new location.
+ *
+ * if called by link_to_upper, the block has already been relocated.
+ * in that case this function just updates pointers.
+ */
+static int do_relocation(struct btrfs_trans_handle *trans,
+			 struct backref_node *node,
+			 struct btrfs_key *key,
+			 struct btrfs_path *path, int lowest)
+{
+	struct backref_node *upper;
+	struct backref_edge *edge;
+	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	struct btrfs_root *root;
+	struct extent_buffer *eb;
+	u32 blocksize;
+	u64 bytenr;
+	u64 generation;
+	int nr;
+	int slot;
+	int ret;
+	int err = 0;
+
+	BUG_ON(lowest && node->eb);
+
+	path->lowest_level = node->level + 1;
+	list_for_each_entry(edge, &node->upper, list[LOWER]) {
+		cond_resched();
+		if (node->eb && node->eb->start == edge->blockptr)
+			continue;
+
+		upper = edge->node[UPPER];
+		root = select_reloc_root(trans, upper, edges, &nr);
+		if (!root)
+			continue;
+
+		if (upper->eb && !upper->locked)
+			drop_node_buffer(upper);
+
+		if (!upper->eb) {
+			ret = btrfs_search_slot(trans, root, key, path, 0, 1);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			BUG_ON(ret > 0);
+
+			slot = path->slots[upper->level];
+
+			btrfs_unlock_up_safe(path, upper->level + 1);
+			grab_path_buffers(path, upper, edges, nr);
+
+			btrfs_release_path(NULL, path);
+		} else {
+			ret = btrfs_bin_search(upper->eb, key, upper->level,
+					       &slot);
+			BUG_ON(ret);
+		}
+
+		bytenr = btrfs_node_blockptr(upper->eb, slot);
+		if (!lowest) {
+			if (node->eb->start == bytenr) {
+				btrfs_tree_unlock(upper->eb);
+				upper->locked = 0;
+				continue;
+			}
+		} else {
+			BUG_ON(node->bytenr != bytenr);
+		}
+
+		blocksize = btrfs_level_size(root, node->level);
+		generation = btrfs_node_ptr_generation(upper->eb, slot);
+		eb = read_tree_block(root, bytenr, blocksize, generation);
+		btrfs_tree_lock(eb);
+		btrfs_set_lock_blocking(eb);
+
+		if (!node->eb) {
+			ret = btrfs_cow_block(trans, root, eb, upper->eb,
+					      slot, &eb);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			btrfs_set_lock_blocking(eb);
+			node->eb = eb;
+			node->locked = 1;
+		} else {
+			btrfs_set_node_blockptr(upper->eb, slot,
+						node->eb->start);
+			btrfs_set_node_ptr_generation(upper->eb, slot,
+						      trans->transid);
+			btrfs_mark_buffer_dirty(upper->eb);
+
+			ret = btrfs_inc_extent_ref(trans, root,
+						node->eb->start, blocksize,
+						upper->eb->start,
+						btrfs_header_owner(upper->eb),
+						node->level, 0);
+			BUG_ON(ret);
+
+			ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
+			BUG_ON(ret);
+
+			btrfs_tree_unlock(eb);
+			free_extent_buffer(eb);
+		}
+		if (!lowest) {
+			btrfs_tree_unlock(upper->eb);
+			upper->locked = 0;
+		}
+	}
+	path->lowest_level = 0;
+	return err;
+}
+
+static int link_to_upper(struct btrfs_trans_handle *trans,
+			 struct backref_node *node,
+			 struct btrfs_path *path)
+{
+	struct btrfs_key key;
+	if (!node->eb || list_empty(&node->upper))
+		return 0;
+
+	btrfs_node_key_to_cpu(node->eb, &key, 0);
+	return do_relocation(trans, node, &key, path, 0);
+}
+
+static int finish_pending_nodes(struct btrfs_trans_handle *trans,
+				struct backref_cache *cache,
+				struct btrfs_path *path)
+{
+	struct backref_node *node;
+	int level;
+	int ret;
+	int err = 0;
+
+	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+		while (!list_empty(&cache->pending[level])) {
+			node = list_entry(cache->pending[level].next,
+					  struct backref_node, lower);
+			BUG_ON(node->level != level);
+
+			ret = link_to_upper(trans, node, path);
+			if (ret < 0)
+				err = ret;
+			/*
+			 * this remove the node from the pending list and
+			 * may add some other nodes to the level + 1
+			 * pending list
+			 */
+			remove_backref_node(cache, node);
+		}
+	}
+	BUG_ON(!RB_EMPTY_ROOT(&cache->rb_root));
+	return err;
+}
+
+static void mark_block_processed(struct reloc_control *rc,
+				 struct backref_node *node)
+{
+	u32 blocksize;
+	if (node->level == 0 ||
+	    in_block_group(node->bytenr, rc->block_group)) {
+		blocksize = btrfs_level_size(rc->extent_root, node->level);
+		set_extent_bits(&rc->processed_blocks, node->bytenr,
+				node->bytenr + blocksize - 1, EXTENT_DIRTY,
+				GFP_NOFS);
+	}
+	node->processed = 1;
+}
+
+/*
+ * mark a block and all blocks directly/indirectly reference the block
+ * as processed.
+ */
+static void update_processed_blocks(struct reloc_control *rc,
+				    struct backref_node *node)
+{
+	struct backref_node *next = node;
+	struct backref_edge *edge;
+	struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+	int index = 0;
+
+	while (next) {
+		cond_resched();
+		while (1) {
+			if (next->processed)
+				break;
+
+			mark_block_processed(rc, next);
+
+			if (list_empty(&next->upper))
+				break;
+
+			edge = list_entry(next->upper.next,
+					  struct backref_edge, list[LOWER]);
+			edges[index++] = edge;
+			next = edge->node[UPPER];
+		}
+		next = walk_down_backref(edges, &index);
+	}
+}
+
+static int tree_block_processed(u64 bytenr, u32 blocksize,
+				struct reloc_control *rc)
+{
+	if (test_range_bit(&rc->processed_blocks, bytenr,
+			   bytenr + blocksize - 1, EXTENT_DIRTY, 1))
+		return 1;
+	return 0;
+}
+
+/*
+ * check if there are any file extent pointers in the leaf point to
+ * data require processing
+ */
+static int check_file_extents(struct reloc_control *rc,
+			      u64 bytenr, u32 blocksize, u64 ptr_gen)
+{
+	struct btrfs_key found_key;
+	struct btrfs_file_extent_item *fi;
+	struct extent_buffer *leaf;
+	u32 nritems;
+	int i;
+	int ret = 0;
+
+	leaf = read_tree_block(rc->extent_root, bytenr, blocksize, ptr_gen);
+
+	nritems = btrfs_header_nritems(leaf);
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		btrfs_item_key_to_cpu(leaf, &found_key, i);
+		if (found_key.type != BTRFS_EXTENT_DATA_KEY)
+			continue;
+		fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
+		if (btrfs_file_extent_type(leaf, fi) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			continue;
+		bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+		if (bytenr == 0)
+			continue;
+		if (in_block_group(bytenr, rc->block_group)) {
+			ret = 1;
+			break;
+		}
+	}
+	free_extent_buffer(leaf);
+	return ret;
+}
+
+/*
+ * scan child blocks of a given block to find blocks require processing
+ */
+static int add_child_blocks(struct btrfs_trans_handle *trans,
+			    struct reloc_control *rc,
+			    struct backref_node *node,
+			    struct rb_root *blocks)
+{
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	u64 bytenr;
+	u64 ptr_gen;
+	u32 blocksize;
+	u32 nritems;
+	int i;
+	int err = 0;
+
+	nritems = btrfs_header_nritems(node->eb);
+	blocksize = btrfs_level_size(rc->extent_root, node->level - 1);
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		bytenr = btrfs_node_blockptr(node->eb, i);
+		ptr_gen = btrfs_node_ptr_generation(node->eb, i);
+		if (ptr_gen == trans->transid)
+			continue;
+		if (!in_block_group(bytenr, rc->block_group) &&
+		    (node->level > 1 || rc->stage == MOVE_DATA_EXTENTS))
+			continue;
+		if (tree_block_processed(bytenr, blocksize, rc))
+			continue;
+
+		readahead_tree_block(rc->extent_root,
+				     bytenr, blocksize, ptr_gen);
+	}
+
+	for (i = 0; i < nritems; i++) {
+		cond_resched();
+		bytenr = btrfs_node_blockptr(node->eb, i);
+		ptr_gen = btrfs_node_ptr_generation(node->eb, i);
+		if (ptr_gen == trans->transid)
+			continue;
+		if (!in_block_group(bytenr, rc->block_group) &&
+		    (node->level > 1 || rc->stage == MOVE_DATA_EXTENTS))
+			continue;
+		if (tree_block_processed(bytenr, blocksize, rc))
+			continue;
+		if (!in_block_group(bytenr, rc->block_group) &&
+		    !check_file_extents(rc, bytenr, blocksize, ptr_gen))
+			continue;
+
+		block = kmalloc(sizeof(*block), GFP_NOFS);
+		if (!block) {
+			err = -ENOMEM;
+			break;
+		}
+		block->bytenr = bytenr;
+		btrfs_node_key_to_cpu(node->eb, &block->key, i);
+		block->level = node->level - 1;
+		block->key_ready = 1;
+		rb_node = tree_insert(blocks, block->bytenr, &block->rb_node);
+		BUG_ON(rb_node);
+	}
+	if (err)
+		free_block_list(blocks);
+	return err;
+}
+
+/*
+ * find adjacent blocks require processing
+ */
+static noinline_for_stack
+int add_adjacent_blocks(struct btrfs_trans_handle *trans,
+			struct reloc_control *rc,
+			struct backref_cache *cache,
+			struct rb_root *blocks, int level,
+			struct backref_node **upper)
+{
+	struct backref_node *node;
+	int ret = 0;
+
+	WARN_ON(!list_empty(&cache->pending[level]));
+
+	if (list_empty(&cache->pending[level + 1]))
+		return 1;
+
+	node = list_entry(cache->pending[level + 1].next,
+			  struct backref_node, lower);
+	if (node->eb)
+		ret = add_child_blocks(trans, rc, node, blocks);
+
+	*upper = node;
+	return ret;
+}
+
+static int get_tree_block_key(struct reloc_control *rc,
+			      struct tree_block *block)
+{
+	struct extent_buffer *eb;
+
+	BUG_ON(block->key_ready);
+	eb = read_tree_block(rc->extent_root, block->bytenr,
+			     block->key.objectid, block->key.offset);
+	WARN_ON(btrfs_header_level(eb) != block->level);
+	if (block->level == 0)
+		btrfs_item_key_to_cpu(eb, &block->key, 0);
+	else
+		btrfs_node_key_to_cpu(eb, &block->key, 0);
+	free_extent_buffer(eb);
+	block->key_ready = 1;
+	return 0;
+}
+
+static int reada_tree_block(struct reloc_control *rc,
+			    struct tree_block *block)
+{
+	BUG_ON(block->key_ready);
+	readahead_tree_block(rc->extent_root, block->bytenr,
+			     block->key.objectid, block->key.offset);
+	return 0;
+}
+
+/*
+ * helper function to relocate a tree block
+ */
+static int relocate_tree_block(struct btrfs_trans_handle *trans,
+				struct reloc_control *rc,
+				struct backref_node *node,
+				struct btrfs_key *key,
+				struct btrfs_path *path)
+{
+	struct btrfs_root *root;
+	int ret;
+
+	root = select_one_root(trans, node);
+	if (unlikely(!root)) {
+		rc->found_old_snapshot = 1;
+		update_processed_blocks(rc, node);
+		return 0;
+	}
+
+	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
+		ret = do_relocation(trans, node, key, path, 1);
+		if (ret < 0)
+			goto out;
+		if (node->level == 0 && rc->stage == UPDATE_DATA_PTRS) {
+			ret = replace_file_extents(trans, rc, root,
+						   node->eb, NULL);
+			if (ret < 0)
+				goto out;
+		}
+		drop_node_buffer(node);
+	} else if (!root->ref_cows) {
+		path->lowest_level = node->level;
+		ret = btrfs_search_slot(trans, root, key, path, 0, 1);
+		btrfs_release_path(root, path);
+		if (ret < 0)
+			goto out;
+	} else if (root != node->root) {
+		WARN_ON(node->level > 0 || rc->stage != UPDATE_DATA_PTRS);
+	}
+
+	update_processed_blocks(rc, node);
+	ret = 0;
+out:
+	drop_node_buffer(node);
+	return ret;
+}
+
+/*
+ * relocate a list of blocks
+ */
+static noinline_for_stack
+int relocate_tree_blocks(struct btrfs_trans_handle *trans,
+			 struct reloc_control *rc, struct rb_root *blocks)
+{
+	struct backref_cache *cache;
+	struct backref_node *node;
+	struct btrfs_path *path;
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	int level = -1;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	cache = kmalloc(sizeof(*cache), GFP_NOFS);
+	if (!cache) {
+		btrfs_free_path(path);
+		return -ENOMEM;
+	}
+
+	backref_cache_init(cache);
+
+	rb_node = rb_first(blocks);
+	while (rb_node) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+		if (level == -1)
+			level = block->level;
+		else
+			BUG_ON(level != block->level);
+		if (!block->key_ready)
+			reada_tree_block(rc, block);
+		rb_node = rb_next(rb_node);
+	}
+
+	rb_node = rb_first(blocks);
+	while (rb_node) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+		if (!block->key_ready)
+			get_tree_block_key(rc, block);
+		rb_node = rb_next(rb_node);
+	}
+
+	rb_node = rb_first(blocks);
+	while (rb_node) {
+		block = rb_entry(rb_node, struct tree_block, rb_node);
+
+		node = build_backref_tree(rc, cache, &block->key,
+					  block->level, block->bytenr);
+		if (IS_ERR(node)) {
+			err = PTR_ERR(node);
+			goto out;
+		}
+
+		ret = relocate_tree_block(trans, rc, node, &block->key,
+					  path);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		remove_backref_node(cache, node);
+		rb_node = rb_next(rb_node);
+	}
+
+	if (level > 0)
+		goto out;
+
+	free_block_list(blocks);
+
+	/*
+	 * now backrefs of some upper level tree blocks have been cached,
+	 * try relocating blocks referenced by these upper level blocks.
+	 */
+	while (1) {
+		struct backref_node *upper = NULL;
+		if (trans->transaction->in_commit ||
+		    trans->transaction->delayed_refs.flushing)
+			break;
+
+		ret = add_adjacent_blocks(trans, rc, cache, blocks, level,
+					  &upper);
+		if (ret < 0)
+			err = ret;
+		if (ret != 0)
+			break;
+
+		rb_node = rb_first(blocks);
+		while (rb_node) {
+			block = rb_entry(rb_node, struct tree_block, rb_node);
+			if (trans->transaction->in_commit ||
+			    trans->transaction->delayed_refs.flushing)
+				goto out;
+			BUG_ON(!block->key_ready);
+			node = build_backref_tree(rc, cache, &block->key,
+						  level, block->bytenr);
+			if (IS_ERR(node)) {
+				err = PTR_ERR(node);
+				goto out;
+			}
+
+			ret = relocate_tree_block(trans, rc, node,
+						  &block->key, path);
+			if (ret < 0) {
+				err = ret;
+				goto out;
+			}
+			remove_backref_node(cache, node);
+			rb_node = rb_next(rb_node);
+		}
+		free_block_list(blocks);
+
+		if (upper) {
+			ret = link_to_upper(trans, upper, path);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			remove_backref_node(cache, upper);
+		}
+	}
+out:
+	free_block_list(blocks);
+
+	ret = finish_pending_nodes(trans, cache, path);
+	if (ret < 0)
+		err = ret;
+
+	kfree(cache);
+	btrfs_free_path(path);
+	return err;
+}
+
+static noinline_for_stack
+int relocate_inode_pages(struct inode *inode, u64 start, u64 len)
+{
+	u64 page_start;
+	u64 page_end;
+	unsigned long i;
+	unsigned long first_index;
+	unsigned long last_index;
+	unsigned int total_read = 0;
+	unsigned int total_dirty = 0;
+	struct page *page;
+	struct file_ra_state *ra;
+	struct btrfs_ordered_extent *ordered;
+	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+	int ret = 0;
+
+	ra = kzalloc(sizeof(*ra), GFP_NOFS);
+	if (!ra)
+		return -ENOMEM;
+
+	mutex_lock(&inode->i_mutex);
+	first_index = start >> PAGE_CACHE_SHIFT;
+	last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
+
+	/* make sure the dirty trick played by the caller work */
+	ret = invalidate_inode_pages2_range(inode->i_mapping,
+					    first_index, last_index);
+	if (ret)
+		goto out_unlock;
+
+	file_ra_state_init(ra, inode->i_mapping);
+
+	for (i = first_index ; i <= last_index; i++) {
+		if (total_read % ra->ra_pages == 0) {
+			btrfs_force_ra(inode->i_mapping, ra, NULL, i,
+				min(last_index, ra->ra_pages + i - 1));
+		}
+		total_read++;
+again:
+		if (((u64)i << PAGE_CACHE_SHIFT) > i_size_read(inode))
+			BUG_ON(1);
+		page = grab_cache_page(inode->i_mapping, i);
+		if (!page) {
+			ret = -ENOMEM;
+			goto out_unlock;
+		}
+		if (!PageUptodate(page)) {
+			btrfs_readpage(NULL, page);
+			lock_page(page);
+			if (!PageUptodate(page)) {
+				unlock_page(page);
+				page_cache_release(page);
+				ret = -EIO;
+				goto out_unlock;
+			}
+		}
+		wait_on_page_writeback(page);
+
+		page_start = (u64)page->index << PAGE_CACHE_SHIFT;
+		page_end = page_start + PAGE_CACHE_SIZE - 1;
+		lock_extent(io_tree, page_start, page_end, GFP_NOFS);
+
+		ordered = btrfs_lookup_ordered_extent(inode, page_start);
+		if (ordered) {
+			unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+			unlock_page(page);
+			page_cache_release(page);
+			btrfs_start_ordered_extent(inode, ordered, 1);
+			btrfs_put_ordered_extent(ordered);
+			goto again;
+		}
+		set_page_extent_mapped(page);
+
+		if (i == first_index)
+			set_extent_bits(io_tree, page_start, page_end,
+					EXTENT_BOUNDARY, GFP_NOFS);
+		btrfs_set_extent_delalloc(inode, page_start, page_end);
+
+		set_page_dirty(page);
+		total_dirty++;
+
+		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		unlock_page(page);
+		page_cache_release(page);
+	}
+out_unlock:
+	mutex_unlock(&inode->i_mutex);
+	kfree(ra);
+	balance_dirty_pages_ratelimited_nr(inode->i_mapping, total_dirty);
+	return ret;
+}
+
+static noinline_for_stack
+int relocate_data_extent(struct inode *inode, struct btrfs_key *extent_key)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+	struct extent_map *em;
+	u64 start = extent_key->objectid - BTRFS_I(inode)->index_cnt;
+	u64 end = start + extent_key->offset - 1;
+
+	em = alloc_extent_map(GFP_NOFS);
+	em->start = start;
+	em->len = extent_key->offset;
+	em->block_len = extent_key->offset;
+	em->block_start = extent_key->objectid;
+	em->bdev = root->fs_info->fs_devices->latest_bdev;
+	set_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+	/* setup extent map to cheat btrfs_readpage */
+	lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+	while (1) {
+		int ret;
+		spin_lock(&em_tree->lock);
+		ret = add_extent_mapping(em_tree, em);
+		spin_unlock(&em_tree->lock);
+		if (ret != -EEXIST) {
+			free_extent_map(em);
+			break;
+		}
+		btrfs_drop_extent_cache(inode, start, end, 0);
+	}
+	unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+
+	return relocate_inode_pages(inode, start, extent_key->offset);
+}
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+static int get_ref_objectid_v0(struct reloc_control *rc,
+			       struct btrfs_path *path,
+			       struct btrfs_key *extent_key,
+			       u64 *ref_objectid, int *path_change)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	struct btrfs_extent_ref_v0 *ref0;
+	int ret;
+	int slot;
+
+	leaf = path->nodes[0];
+	slot = path->slots[0];
+	while (1) {
+		if (slot >= btrfs_header_nritems(leaf)) {
+			ret = btrfs_next_leaf(rc->extent_root, path);
+			if (ret < 0)
+				return ret;
+			BUG_ON(ret > 0);
+			leaf = path->nodes[0];
+			slot = path->slots[0];
+			if (path_change)
+				*path_change = 1;
+		}
+		btrfs_item_key_to_cpu(leaf, &key, slot);
+		if (key.objectid != extent_key->objectid)
+			return -ENOENT;
+
+		if (key.type != BTRFS_EXTENT_REF_V0_KEY) {
+			slot++;
+			continue;
+		}
+		ref0 = btrfs_item_ptr(leaf, slot,
+				struct btrfs_extent_ref_v0);
+		*ref_objectid = btrfs_ref_objectid_v0(leaf, ref0);
+		break;
+	}
+	return 0;
+}
+#endif
+
+/*
+ * helper to add a tree block to the list.
+ * the major work is getting the generation and level of the block
+ */
+static int add_tree_block(struct reloc_control *rc,
+			  struct btrfs_key *extent_key,
+			  struct btrfs_path *path,
+			  struct rb_root *blocks)
+{
+	struct extent_buffer *eb;
+	struct btrfs_extent_item *ei;
+	struct btrfs_tree_block_info *bi;
+	struct tree_block *block;
+	struct rb_node *rb_node;
+	u32 item_size;
+	int level = -1;
+	int generation;
+
+	eb =  path->nodes[0];
+	item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+	if (item_size >= sizeof(*ei) + sizeof(*bi)) {
+		ei = btrfs_item_ptr(eb, path->slots[0],
+				struct btrfs_extent_item);
+		bi = (struct btrfs_tree_block_info *)(ei + 1);
+		generation = btrfs_extent_generation(eb, ei);
+		level = btrfs_tree_block_level(eb, bi);
+	} else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		u64 ref_owner;
+		int ret;
+
+		BUG_ON(item_size != sizeof(struct btrfs_extent_item_v0));
+		ret = get_ref_objectid_v0(rc, path, extent_key,
+					  &ref_owner, NULL);
+		BUG_ON(ref_owner >= BTRFS_MAX_LEVEL);
+		level = (int)ref_owner;
+		/* FIXME: get real generation */
+		generation = 0;
+#else
+		BUG();
+#endif
+	}
+
+	btrfs_release_path(rc->extent_root, path);
+
+	BUG_ON(level == -1);
+
+	block = kmalloc(sizeof(*block), GFP_NOFS);
+	if (!block)
+		return -ENOMEM;
+
+	block->bytenr = extent_key->objectid;
+	block->key.objectid = extent_key->offset;
+	block->key.offset = generation;
+	block->level = level;
+	block->key_ready = 0;
+
+	rb_node = tree_insert(blocks, block->bytenr, &block->rb_node);
+	BUG_ON(rb_node);
+
+	return 0;
+}
+
+/*
+ * helper to add tree blocks for backref of type BTRFS_SHARED_DATA_REF_KEY
+ */
+static int __add_tree_block(struct reloc_control *rc,
+			    u64 bytenr, u32 blocksize,
+			    struct rb_root *blocks)
+{
+	struct btrfs_path *path;
+	struct btrfs_key key;
+	int ret;
+
+	if (tree_block_processed(bytenr, blocksize, rc))
+		return 0;
+
+	if (tree_search(blocks, bytenr))
+		return 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	key.objectid = bytenr;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = blocksize;
+
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, rc->extent_root, &key, path, 0, 0);
+	if (ret < 0)
+		goto out;
+	BUG_ON(ret);
+
+	btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+	ret = add_tree_block(rc, &key, path, blocks);
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * helper to check if the block use full backrefs for pointers in it
+ */
+static int block_use_full_backref(struct reloc_control *rc,
+				  struct extent_buffer *eb)
+{
+	struct btrfs_path *path;
+	struct btrfs_extent_item *ei;
+	struct btrfs_key key;
+	u64 flags;
+	int ret;
+
+	if (btrfs_header_flag(eb, BTRFS_HEADER_FLAG_RELOC) ||
+	    btrfs_header_backref_rev(eb) < BTRFS_MIXED_BACKREF_REV)
+		return 1;
+
+	path = btrfs_alloc_path();
+	BUG_ON(!path);
+
+	key.objectid = eb->start;
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.offset = eb->len;
+
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, rc->extent_root,
+				&key, path, 0, 0);
+	BUG_ON(ret);
+
+	ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+			    struct btrfs_extent_item);
+	flags = btrfs_extent_flags(path->nodes[0], ei);
+	BUG_ON(!(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK));
+	if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+		ret = 1;
+	else
+		ret = 0;
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * helper to add tree blocks for backref of type BTRFS_EXTENT_DATA_REF_KEY
+ * this function scans fs tree to find blocks reference the data extent
+ */
+static int find_data_references(struct reloc_control *rc,
+				struct btrfs_key *extent_key,
+				struct extent_buffer *leaf,
+				struct btrfs_extent_data_ref *ref,
+				struct rb_root *blocks)
+{
+	struct btrfs_path *path;
+	struct tree_block *block;
+	struct btrfs_root *root;
+	struct btrfs_file_extent_item *fi;
+	struct rb_node *rb_node;
+	struct btrfs_key key;
+	u64 ref_root;
+	u64 ref_objectid;
+	u64 ref_offset;
+	u32 ref_count;
+	u32 nritems;
+	int err = 0;
+	int added = 0;
+	int counted;
+	int ret;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	ref_root = btrfs_extent_data_ref_root(leaf, ref);
+	ref_objectid = btrfs_extent_data_ref_objectid(leaf, ref);
+	ref_offset = btrfs_extent_data_ref_offset(leaf, ref);
+	ref_count = btrfs_extent_data_ref_count(leaf, ref);
+
+	root = read_fs_root(rc->extent_root->fs_info, ref_root);
+	if (IS_ERR(root)) {
+		err = PTR_ERR(root);
+		goto out;
+	}
+
+	key.objectid = ref_objectid;
+	key.offset = ref_offset;
+	key.type = BTRFS_EXTENT_DATA_KEY;
+
+	path->search_commit_root = 1;
+	path->skip_locking = 1;
+	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	if (ret < 0) {
+		err = ret;
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	nritems = btrfs_header_nritems(leaf);
+	/*
+	 * the references in tree blocks that use full backrefs
+	 * are not counted in
+	 */
+	if (block_use_full_backref(rc, leaf))
+		counted = 0;
+	else
+		counted = 1;
+	rb_node = tree_search(blocks, leaf->start);
+	if (rb_node) {
+		if (counted)
+			added = 1;
+		else
+			path->slots[0] = nritems;
+	}
+
+	while (ref_count > 0) {
+		while (path->slots[0] >= nritems) {
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0) {
+				err = ret;
+				goto out;
+			}
+			if (ret > 0) {
+				WARN_ON(1);
+				goto out;
+			}
+
+			leaf = path->nodes[0];
+			nritems = btrfs_header_nritems(leaf);
+			added = 0;
+
+			if (block_use_full_backref(rc, leaf))
+				counted = 0;
+			else
+				counted = 1;
+			rb_node = tree_search(blocks, leaf->start);
+			if (rb_node) {
+				if (counted)
+					added = 1;
+				else
+					path->slots[0] = nritems;
+			}
+		}
+
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		if (key.objectid != ref_objectid ||
+		    key.type != BTRFS_EXTENT_DATA_KEY) {
+			WARN_ON(1);
+			break;
+		}
+
+		fi = btrfs_item_ptr(leaf, path->slots[0],
+				    struct btrfs_file_extent_item);
+
+		if (btrfs_file_extent_type(leaf, fi) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			goto next;
+
+		if (btrfs_file_extent_disk_bytenr(leaf, fi) !=
+		    extent_key->objectid)
+			goto next;
+
+		key.offset -= btrfs_file_extent_offset(leaf, fi);
+		if (key.offset != ref_offset)
+			goto next;
+
+		if (counted)
+			ref_count--;
+		if (added)
+			goto next;
+
+		if (!tree_block_processed(leaf->start, leaf->len, rc)) {
+			block = kmalloc(sizeof(*block), GFP_NOFS);
+			if (!block) {
+				err = -ENOMEM;
+				break;
+			}
+			block->bytenr = leaf->start;
+			btrfs_item_key_to_cpu(leaf, &block->key, 0);
+			block->level = 0;
+			block->key_ready = 1;
+			rb_node = tree_insert(blocks, block->bytenr,
+					      &block->rb_node);
+			BUG_ON(rb_node);
+		}
+		if (counted)
+			added = 1;
+		else
+			path->slots[0] = nritems;
+next:
+		path->slots[0]++;
+
+	}
+out:
+	btrfs_free_path(path);
+	return err;
+}
+
+/*
+ * hepler to find all tree blocks that reference a given data extent
+ */
+static noinline_for_stack
+int add_data_references(struct reloc_control *rc,
+			struct btrfs_key *extent_key,
+			struct btrfs_path *path,
+			struct rb_root *blocks)
+{
+	struct btrfs_key key;
+	struct extent_buffer *eb;
+	struct btrfs_extent_data_ref *dref;
+	struct btrfs_extent_inline_ref *iref;
+	unsigned long ptr;
+	unsigned long end;
+	u32 blocksize;
+	int ret;
+	int err = 0;
+
+	ret = get_new_location(rc->data_inode, NULL, extent_key->objectid,
+			       extent_key->offset);
+	BUG_ON(ret < 0);
+	if (ret > 0) {
+		/* the relocated data is fragmented */
+		rc->extents_skipped++;
+		btrfs_release_path(rc->extent_root, path);
+		return 0;
+	}
+
+	blocksize = btrfs_level_size(rc->extent_root, 0);
+
+	eb = path->nodes[0];
+	ptr = btrfs_item_ptr_offset(eb, path->slots[0]);
+	end = ptr + btrfs_item_size_nr(eb, path->slots[0]);
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+	if (ptr + sizeof(struct btrfs_extent_item_v0) == end)
+		ptr = end;
+	else
+#endif
+		ptr += sizeof(struct btrfs_extent_item);
+
+	while (ptr < end) {
+		iref = (struct btrfs_extent_inline_ref *)ptr;
+		key.type = btrfs_extent_inline_ref_type(eb, iref);
+		if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+			key.offset = btrfs_extent_inline_ref_offset(eb, iref);
+			ret = __add_tree_block(rc, key.offset, blocksize,
+					       blocks);
+		} else if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+			dref = (struct btrfs_extent_data_ref *)(&iref->offset);
+			ret = find_data_references(rc, extent_key,
+						   eb, dref, blocks);
+		} else {
+			BUG();
+		}
+		ptr += btrfs_extent_inline_ref_size(key.type);
+	}
+	WARN_ON(ptr > end);
+
+	while (1) {
+		cond_resched();
+		eb = path->nodes[0];
+		if (path->slots[0] >= btrfs_header_nritems(eb)) {
+			ret = btrfs_next_leaf(rc->extent_root, path);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+			if (ret > 0)
+				break;
+			eb = path->nodes[0];
+		}
+
+		btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+		if (key.objectid != extent_key->objectid)
+			break;
+
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+		if (key.type == BTRFS_SHARED_DATA_REF_KEY ||
+		    key.type == BTRFS_EXTENT_REF_V0_KEY) {
+#else
+		BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
+		if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+#endif
+			ret = __add_tree_block(rc, key.offset, blocksize,
+					       blocks);
+		} else if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+			dref = btrfs_item_ptr(eb, path->slots[0],
+					      struct btrfs_extent_data_ref);
+			ret = find_data_references(rc, extent_key,
+						   eb, dref, blocks);
+		} else {
+			ret = 0;
+		}
+		if (ret) {
+			err = ret;
+			break;
+		}
+		path->slots[0]++;
+	}
+	btrfs_release_path(rc->extent_root, path);
+	if (err)
+		free_block_list(blocks);
+	return err;
+}
+
+/*
+ * hepler to find next unprocessed extent
+ */
+static noinline_for_stack
+int find_next_extent(struct btrfs_trans_handle *trans,
+		     struct reloc_control *rc, struct btrfs_path *path)
+{
+	struct btrfs_key key;
+	struct extent_buffer *leaf;
+	u64 start, end, last;
+	int ret;
+
+	last = rc->block_group->key.objectid + rc->block_group->key.offset;
+	while (1) {
+		cond_resched();
+		if (rc->search_start >= last) {
+			ret = 1;
+			break;
+		}
+
+		key.objectid = rc->search_start;
+		key.type = BTRFS_EXTENT_ITEM_KEY;
+		key.offset = 0;
+
+		path->search_commit_root = 1;
+		path->skip_locking = 1;
+		ret = btrfs_search_slot(NULL, rc->extent_root, &key, path,
+					0, 0);
+		if (ret < 0)
+			break;
+next:
+		leaf = path->nodes[0];
+		if (path->slots[0] >= btrfs_header_nritems(leaf)) {
+			ret = btrfs_next_leaf(rc->extent_root, path);
+			if (ret != 0)
+				break;
+			leaf = path->nodes[0];
+		}
+
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		if (key.objectid >= last) {
+			ret = 1;
+			break;
+		}
+
+		if (key.type != BTRFS_EXTENT_ITEM_KEY ||
+		    key.objectid + key.offset <= rc->search_start) {
+			path->slots[0]++;
+			goto next;
+		}
+
+		ret = find_first_extent_bit(&rc->processed_blocks,
+					    key.objectid, &start, &end,
+					    EXTENT_DIRTY);
+
+		if (ret == 0 && start <= key.objectid) {
+			btrfs_release_path(rc->extent_root, path);
+			rc->search_start = end + 1;
+		} else {
+			rc->search_start = key.objectid + key.offset;
+			return 0;
+		}
+	}
+	btrfs_release_path(rc->extent_root, path);
+	return ret;
+}
+
+static void set_reloc_control(struct reloc_control *rc)
+{
+	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
+	mutex_lock(&fs_info->trans_mutex);
+	fs_info->reloc_ctl = rc;
+	mutex_unlock(&fs_info->trans_mutex);
+}
+
+static void unset_reloc_control(struct reloc_control *rc)
+{
+	struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
+	mutex_lock(&fs_info->trans_mutex);
+	fs_info->reloc_ctl = NULL;
+	mutex_unlock(&fs_info->trans_mutex);
+}
+
+static int check_extent_flags(u64 flags)
+{
+	if ((flags & BTRFS_EXTENT_FLAG_DATA) &&
+	    (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK))
+		return 1;
+	if (!(flags & BTRFS_EXTENT_FLAG_DATA) &&
+	    !(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK))
+		return 1;
+	if ((flags & BTRFS_EXTENT_FLAG_DATA) &&
+	    (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+		return 1;
+	return 0;
+}
+
+static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
+{
+	struct rb_root blocks = RB_ROOT;
+	struct btrfs_key key;
+	struct btrfs_trans_handle *trans = NULL;
+	struct btrfs_path *path;
+	struct btrfs_extent_item *ei;
+	unsigned long nr;
+	u64 flags;
+	u32 item_size;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	rc->search_start = rc->block_group->key.objectid;
+	clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
+			  GFP_NOFS);
+
+	rc->create_reloc_root = 1;
+	set_reloc_control(rc);
+
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+
+	while (1) {
+		trans = btrfs_start_transaction(rc->extent_root, 1);
+
+		ret = find_next_extent(trans, rc, path);
+		if (ret < 0)
+			err = ret;
+		if (ret != 0)
+			break;
+
+		rc->extents_found++;
+
+		ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+				    struct btrfs_extent_item);
+		btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+		item_size = btrfs_item_size_nr(path->nodes[0],
+					       path->slots[0]);
+		if (item_size >= sizeof(*ei)) {
+			flags = btrfs_extent_flags(path->nodes[0], ei);
+			ret = check_extent_flags(flags);
+			BUG_ON(ret);
+
+		} else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+			u64 ref_owner;
+			int path_change = 0;
+
+			BUG_ON(item_size !=
+			       sizeof(struct btrfs_extent_item_v0));
+			ret = get_ref_objectid_v0(rc, path, &key, &ref_owner,
+						  &path_change);
+			if (ref_owner < BTRFS_FIRST_FREE_OBJECTID)
+				flags = BTRFS_EXTENT_FLAG_TREE_BLOCK;
+			else
+				flags = BTRFS_EXTENT_FLAG_DATA;
+
+			if (path_change) {
+				btrfs_release_path(rc->extent_root, path);
+
+				path->search_commit_root = 1;
+				path->skip_locking = 1;
+				ret = btrfs_search_slot(NULL, rc->extent_root,
+							&key, path, 0, 0);
+				if (ret < 0) {
+					err = ret;
+					break;
+				}
+				BUG_ON(ret > 0);
+			}
+#else
+			BUG();
+#endif
+		}
+
+		if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+			ret = add_tree_block(rc, &key, path, &blocks);
+		} else if (rc->stage == UPDATE_DATA_PTRS &&
+			 (flags & BTRFS_EXTENT_FLAG_DATA)) {
+			ret = add_data_references(rc, &key, path, &blocks);
+		} else {
+			btrfs_release_path(rc->extent_root, path);
+			ret = 0;
+		}
+		if (ret < 0) {
+			err = 0;
+			break;
+		}
+
+		if (!RB_EMPTY_ROOT(&blocks)) {
+			ret = relocate_tree_blocks(trans, rc, &blocks);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+		}
+
+		nr = trans->blocks_used;
+		btrfs_end_transaction_throttle(trans, rc->extent_root);
+		trans = NULL;
+		btrfs_btree_balance_dirty(rc->extent_root, nr);
+
+		if (rc->stage == MOVE_DATA_EXTENTS &&
+		    (flags & BTRFS_EXTENT_FLAG_DATA)) {
+			rc->found_file_extent = 1;
+			ret = relocate_data_extent(rc->data_inode, &key);
+			if (ret < 0) {
+				err = ret;
+				break;
+			}
+		}
+	}
+	btrfs_free_path(path);
+
+	if (trans) {
+		nr = trans->blocks_used;
+		btrfs_end_transaction(trans, rc->extent_root);
+		btrfs_btree_balance_dirty(rc->extent_root, nr);
+	}
+
+	rc->create_reloc_root = 0;
+	smp_mb();
+
+	if (rc->extents_found > 0) {
+		trans = btrfs_start_transaction(rc->extent_root, 1);
+		btrfs_commit_transaction(trans, rc->extent_root);
+	}
+
+	merge_reloc_roots(rc);
+
+	unset_reloc_control(rc);
+
+	/* get rid of pinned extents */
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+
+	return err;
+}
+
+static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 u64 objectid, u64 size)
+{
+	struct btrfs_path *path;
+	struct btrfs_inode_item *item;
+	struct extent_buffer *leaf;
+	int ret;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	ret = btrfs_insert_empty_inode(trans, root, path, objectid);
+	if (ret)
+		goto out;
+
+	leaf = path->nodes[0];
+	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item);
+	memset_extent_buffer(leaf, 0, (unsigned long)item, sizeof(*item));
+	btrfs_set_inode_generation(leaf, item, 1);
+	btrfs_set_inode_size(leaf, item, size);
+	btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
+	btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
+	btrfs_mark_buffer_dirty(leaf);
+	btrfs_release_path(root, path);
+out:
+	btrfs_free_path(path);
+	return ret;
+}
+
+/*
+ * helper to create inode for data relocation.
+ * the inode is in data relocation tree and its link count is 0
+ */
+static struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
+					struct btrfs_block_group_cache *group)
+{
+	struct inode *inode = NULL;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *root;
+	struct btrfs_key key;
+	unsigned long nr;
+	u64 objectid = BTRFS_FIRST_FREE_OBJECTID;
+	int err = 0;
+
+	root = read_fs_root(fs_info, BTRFS_DATA_RELOC_TREE_OBJECTID);
+	if (IS_ERR(root))
+		return ERR_CAST(root);
+
+	trans = btrfs_start_transaction(root, 1);
+	BUG_ON(!trans);
+
+	err = btrfs_find_free_objectid(trans, root, objectid, &objectid);
+	if (err)
+		goto out;
+
+	err = __insert_orphan_inode(trans, root, objectid, group->key.offset);
+	BUG_ON(err);
+
+	err = btrfs_insert_file_extent(trans, root, objectid, 0, 0, 0,
+				       group->key.offset, 0, group->key.offset,
+				       0, 0, 0);
+	BUG_ON(err);
+
+	key.objectid = objectid;
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.offset = 0;
+	inode = btrfs_iget(root->fs_info->sb, &key, root);
+	BUG_ON(IS_ERR(inode) || is_bad_inode(inode));
+	BTRFS_I(inode)->index_cnt = group->key.objectid;
+
+	err = btrfs_orphan_add(trans, inode);
+out:
+	nr = trans->blocks_used;
+	btrfs_end_transaction(trans, root);
+
+	btrfs_btree_balance_dirty(root, nr);
+	if (err) {
+		if (inode)
+			iput(inode);
+		inode = ERR_PTR(err);
+	}
+	return inode;
+}
+
+/*
+ * function to relocate all extents in a block group.
+ */
+int btrfs_relocate_block_group(struct btrfs_root *extent_root, u64 group_start)
+{
+	struct btrfs_fs_info *fs_info = extent_root->fs_info;
+	struct reloc_control *rc;
+	int ret;
+	int err = 0;
+
+	rc = kzalloc(sizeof(*rc), GFP_NOFS);
+	if (!rc)
+		return -ENOMEM;
+
+	mapping_tree_init(&rc->reloc_root_tree);
+	extent_io_tree_init(&rc->processed_blocks, NULL, GFP_NOFS);
+	INIT_LIST_HEAD(&rc->reloc_roots);
+
+	rc->block_group = btrfs_lookup_block_group(fs_info, group_start);
+	BUG_ON(!rc->block_group);
+
+	btrfs_init_workers(&rc->workers, "relocate",
+			   fs_info->thread_pool_size);
+
+	rc->extent_root = extent_root;
+	btrfs_prepare_block_group_relocation(extent_root, rc->block_group);
+
+	rc->data_inode = create_reloc_inode(fs_info, rc->block_group);
+	if (IS_ERR(rc->data_inode)) {
+		err = PTR_ERR(rc->data_inode);
+		rc->data_inode = NULL;
+		goto out;
+	}
+
+	printk(KERN_INFO "btrfs: relocating block group %llu flags %llu\n",
+	       (unsigned long long)rc->block_group->key.objectid,
+	       (unsigned long long)rc->block_group->flags);
+
+	btrfs_start_delalloc_inodes(fs_info->tree_root);
+	btrfs_wait_ordered_extents(fs_info->tree_root, 0);
+
+	while (1) {
+		mutex_lock(&fs_info->cleaner_mutex);
+		btrfs_clean_old_snapshots(fs_info->tree_root);
+		mutex_unlock(&fs_info->cleaner_mutex);
+
+		rc->extents_found = 0;
+		rc->extents_skipped = 0;
+
+		ret = relocate_block_group(rc);
+		if (ret < 0) {
+			err = ret;
+			break;
+		}
+
+		if (rc->extents_found == 0)
+			break;
+
+		printk(KERN_INFO "btrfs: found %llu extents\n",
+			(unsigned long long)rc->extents_found);
+
+		if (rc->stage == MOVE_DATA_EXTENTS && rc->found_file_extent) {
+			btrfs_wait_ordered_range(rc->data_inode, 0, (u64)-1);
+			invalidate_mapping_pages(rc->data_inode->i_mapping,
+						 0, -1);
+			rc->stage = UPDATE_DATA_PTRS;
+		} else if (rc->stage == UPDATE_DATA_PTRS &&
+			   rc->extents_skipped >= rc->extents_found) {
+			iput(rc->data_inode);
+			rc->data_inode = create_reloc_inode(fs_info,
+							    rc->block_group);
+			if (IS_ERR(rc->data_inode)) {
+				err = PTR_ERR(rc->data_inode);
+				rc->data_inode = NULL;
+				break;
+			}
+			rc->stage = MOVE_DATA_EXTENTS;
+			rc->found_file_extent = 0;
+		}
+	}
+
+	filemap_fdatawrite_range(fs_info->btree_inode->i_mapping,
+				 rc->block_group->key.objectid,
+				 rc->block_group->key.objectid +
+				 rc->block_group->key.offset - 1);
+
+	WARN_ON(rc->block_group->pinned > 0);
+	WARN_ON(rc->block_group->reserved > 0);
+	WARN_ON(btrfs_block_group_used(&rc->block_group->item) > 0);
+out:
+	iput(rc->data_inode);
+	btrfs_stop_workers(&rc->workers);
+	btrfs_put_block_group(rc->block_group);
+	kfree(rc);
+	return err;
+}
+
+/*
+ * recover relocation interrupted by system crash.
+ *
+ * this function resumes merging reloc trees with corresponding fs trees.
+ * this is important for keeping the sharing of tree blocks
+ */
+int btrfs_recover_relocation(struct btrfs_root *root)
+{
+	LIST_HEAD(reloc_roots);
+	struct btrfs_key key;
+	struct btrfs_root *fs_root;
+	struct btrfs_root *reloc_root;
+	struct btrfs_path *path;
+	struct extent_buffer *leaf;
+	struct reloc_control *rc = NULL;
+	struct btrfs_trans_handle *trans;
+	int ret;
+	int err = 0;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	key.objectid = BTRFS_TREE_RELOC_OBJECTID;
+	key.type = BTRFS_ROOT_ITEM_KEY;
+	key.offset = (u64)-1;
+
+	while (1) {
+		ret = btrfs_search_slot(NULL, root->fs_info->tree_root, &key,
+					path, 0, 0);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		if (ret > 0) {
+			if (path->slots[0] == 0)
+				break;
+			path->slots[0]--;
+		}
+		leaf = path->nodes[0];
+		btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+		btrfs_release_path(root->fs_info->tree_root, path);
+
+		if (key.objectid != BTRFS_TREE_RELOC_OBJECTID ||
+		    key.type != BTRFS_ROOT_ITEM_KEY)
+			break;
+
+		reloc_root = btrfs_read_fs_root_no_radix(root, &key);
+		if (IS_ERR(reloc_root)) {
+			err = PTR_ERR(reloc_root);
+			goto out;
+		}
+
+		list_add(&reloc_root->root_list, &reloc_roots);
+
+		if (btrfs_root_refs(&reloc_root->root_item) > 0) {
+			fs_root = read_fs_root(root->fs_info,
+					       reloc_root->root_key.offset);
+			if (IS_ERR(fs_root)) {
+				err = PTR_ERR(fs_root);
+				goto out;
+			}
+		}
+
+		if (key.offset == 0)
+			break;
+
+		key.offset--;
+	}
+	btrfs_release_path(root->fs_info->tree_root, path);
+
+	if (list_empty(&reloc_roots))
+		goto out;
+
+	rc = kzalloc(sizeof(*rc), GFP_NOFS);
+	if (!rc) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	mapping_tree_init(&rc->reloc_root_tree);
+	INIT_LIST_HEAD(&rc->reloc_roots);
+	btrfs_init_workers(&rc->workers, "relocate",
+			   root->fs_info->thread_pool_size);
+	rc->extent_root = root->fs_info->extent_root;
+
+	set_reloc_control(rc);
+
+	while (!list_empty(&reloc_roots)) {
+		reloc_root = list_entry(reloc_roots.next,
+					struct btrfs_root, root_list);
+		list_del(&reloc_root->root_list);
+
+		if (btrfs_root_refs(&reloc_root->root_item) == 0) {
+			list_add_tail(&reloc_root->root_list,
+				      &rc->reloc_roots);
+			continue;
+		}
+
+		fs_root = read_fs_root(root->fs_info,
+				       reloc_root->root_key.offset);
+		BUG_ON(IS_ERR(fs_root));
+
+		__add_reloc_root(reloc_root);
+		fs_root->reloc_root = reloc_root;
+	}
+
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+
+	merge_reloc_roots(rc);
+
+	unset_reloc_control(rc);
+
+	trans = btrfs_start_transaction(rc->extent_root, 1);
+	btrfs_commit_transaction(trans, rc->extent_root);
+out:
+	if (rc) {
+		btrfs_stop_workers(&rc->workers);
+		kfree(rc);
+	}
+	while (!list_empty(&reloc_roots)) {
+		reloc_root = list_entry(reloc_roots.next,
+					struct btrfs_root, root_list);
+		list_del(&reloc_root->root_list);
+		free_extent_buffer(reloc_root->node);
+		free_extent_buffer(reloc_root->commit_root);
+		kfree(reloc_root);
+	}
+	btrfs_free_path(path);
+
+	if (err == 0) {
+		/* cleanup orphan inode in data relocation tree */
+		fs_root = read_fs_root(root->fs_info,
+				       BTRFS_DATA_RELOC_TREE_OBJECTID);
+		if (IS_ERR(fs_root))
+			err = PTR_ERR(fs_root);
+	}
+	return err;
+}
+
+/*
+ * helper to add ordered checksum for data relocation.
+ *
+ * cloning checksum properly handles the nodatasum extents.
+ * it also saves CPU time to re-calculate the checksum.
+ */
+int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
+{
+	struct btrfs_ordered_sum *sums;
+	struct btrfs_sector_sum *sector_sum;
+	struct btrfs_ordered_extent *ordered;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	size_t offset;
+	int ret;
+	u64 disk_bytenr;
+	LIST_HEAD(list);
+
+	ordered = btrfs_lookup_ordered_extent(inode, file_pos);
+	BUG_ON(ordered->file_offset != file_pos || ordered->len != len);
+
+	disk_bytenr = file_pos + BTRFS_I(inode)->index_cnt;
+	ret = btrfs_lookup_csums_range(root->fs_info->csum_root, disk_bytenr,
+				       disk_bytenr + len - 1, &list);
+
+	while (!list_empty(&list)) {
+		sums = list_entry(list.next, struct btrfs_ordered_sum, list);
+		list_del_init(&sums->list);
+
+		sector_sum = sums->sums;
+		sums->bytenr = ordered->start;
+
+		offset = 0;
+		while (offset < sums->len) {
+			sector_sum->bytenr += ordered->start - disk_bytenr;
+			sector_sum++;
+			offset += root->sectorsize;
+		}
+
+		btrfs_add_ordered_sum(inode, ordered, sums);
+	}
+	btrfs_put_ordered_extent(ordered);
+	return 0;
+}
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index b48650de447..0ddc6d61c55 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -111,6 +111,15 @@ out:
 	return ret;
 }
 
+int btrfs_set_root_node(struct btrfs_root_item *item,
+			struct extent_buffer *node)
+{
+	btrfs_set_root_bytenr(item, node->start);
+	btrfs_set_root_level(item, btrfs_header_level(node));
+	btrfs_set_root_generation(item, btrfs_header_generation(node));
+	return 0;
+}
+
 /*
  * copy the data in 'item' into the btree
  */
@@ -164,8 +173,7 @@ int btrfs_insert_root(struct btrfs_trans_handle *trans, struct btrfs_root
  * offset lower than the latest root.  They need to be queued for deletion to
  * finish what was happening when we crashed.
  */
-int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid,
-			  struct btrfs_root *latest)
+int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid)
 {
 	struct btrfs_root *dead_root;
 	struct btrfs_item *item;
@@ -227,10 +235,7 @@ again:
 			goto err;
 		}
 
-		if (objectid == BTRFS_TREE_RELOC_OBJECTID)
-			ret = btrfs_add_dead_reloc_root(dead_root);
-		else
-			ret = btrfs_add_dead_root(dead_root, latest);
+		ret = btrfs_add_dead_root(dead_root);
 		if (ret)
 			goto err;
 		goto again;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 6dfae5b28f5..9f179d4832d 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -52,7 +52,6 @@
 #include "export.h"
 #include "compression.h"
 
-
 static struct super_operations btrfs_super_ops;
 
 static void btrfs_put_super(struct super_block *sb)
@@ -67,8 +66,8 @@ static void btrfs_put_super(struct super_block *sb)
 enum {
 	Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
 	Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
-	Opt_ssd, Opt_thread_pool, Opt_noacl,  Opt_compress, Opt_notreelog,
-	Opt_ratio, Opt_flushoncommit, Opt_err,
+	Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
+	Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_err,
 };
 
 static match_table_t tokens = {
@@ -84,6 +83,8 @@ static match_table_t tokens = {
 	{Opt_thread_pool, "thread_pool=%d"},
 	{Opt_compress, "compress"},
 	{Opt_ssd, "ssd"},
+	{Opt_ssd_spread, "ssd_spread"},
+	{Opt_nossd, "nossd"},
 	{Opt_noacl, "noacl"},
 	{Opt_notreelog, "notreelog"},
 	{Opt_flushoncommit, "flushoncommit"},
@@ -158,7 +159,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			 */
 			break;
 		case Opt_nodatasum:
-			printk(KERN_INFO "btrfs: setting nodatacsum\n");
+			printk(KERN_INFO "btrfs: setting nodatasum\n");
 			btrfs_set_opt(info->mount_opt, NODATASUM);
 			break;
 		case Opt_nodatacow:
@@ -174,6 +175,19 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			printk(KERN_INFO "btrfs: use ssd allocation scheme\n");
 			btrfs_set_opt(info->mount_opt, SSD);
 			break;
+		case Opt_ssd_spread:
+			printk(KERN_INFO "btrfs: use spread ssd "
+			       "allocation scheme\n");
+			btrfs_set_opt(info->mount_opt, SSD);
+			btrfs_set_opt(info->mount_opt, SSD_SPREAD);
+			break;
+		case Opt_nossd:
+			printk(KERN_INFO "btrfs: not using ssd allocation "
+			       "scheme\n");
+			btrfs_set_opt(info->mount_opt, NOSSD);
+			btrfs_clear_opt(info->mount_opt, SSD);
+			btrfs_clear_opt(info->mount_opt, SSD_SPREAD);
+			break;
 		case Opt_nobarrier:
 			printk(KERN_INFO "btrfs: turning off barriers\n");
 			btrfs_set_opt(info->mount_opt, NOBARRIER);
@@ -322,7 +336,7 @@ static int btrfs_fill_super(struct super_block *sb,
 	struct dentry *root_dentry;
 	struct btrfs_super_block *disk_super;
 	struct btrfs_root *tree_root;
-	struct btrfs_inode *bi;
+	struct btrfs_key key;
 	int err;
 
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
@@ -341,23 +355,15 @@ static int btrfs_fill_super(struct super_block *sb,
 	}
 	sb->s_fs_info = tree_root;
 	disk_super = &tree_root->fs_info->super_copy;
-	inode = btrfs_iget_locked(sb, BTRFS_FIRST_FREE_OBJECTID,
-				  tree_root->fs_info->fs_root);
-	bi = BTRFS_I(inode);
-	bi->location.objectid = inode->i_ino;
-	bi->location.offset = 0;
-	bi->root = tree_root->fs_info->fs_root;
-
-	btrfs_set_key_type(&bi->location, BTRFS_INODE_ITEM_KEY);
 
-	if (!inode) {
-		err = -ENOMEM;
+	key.objectid = BTRFS_FIRST_FREE_OBJECTID;
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.offset = 0;
+	inode = btrfs_iget(sb, &key, tree_root->fs_info->fs_root);
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
 		goto fail_close;
 	}
-	if (inode->i_state & I_NEW) {
-		btrfs_read_locked_inode(inode);
-		unlock_new_inode(inode);
-	}
 
 	root_dentry = d_alloc_root(inode);
 	if (!root_dentry) {
@@ -388,10 +394,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait)
 	struct btrfs_root *root = btrfs_sb(sb);
 	int ret;
 
-	if (sb->s_flags & MS_RDONLY)
-		return 0;
-
-	sb->s_dirt = 0;
 	if (!wait) {
 		filemap_flush(root->fs_info->btree_inode->i_mapping);
 		return 0;
@@ -402,7 +404,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait)
 
 	trans = btrfs_start_transaction(root, 1);
 	ret = btrfs_commit_transaction(trans, root);
-	sb->s_dirt = 0;
 	return ret;
 }
 
@@ -433,22 +434,21 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 		seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
 	if (btrfs_test_opt(root, COMPRESS))
 		seq_puts(seq, ",compress");
-	if (btrfs_test_opt(root, SSD))
+	if (btrfs_test_opt(root, NOSSD))
+		seq_puts(seq, ",nossd");
+	if (btrfs_test_opt(root, SSD_SPREAD))
+		seq_puts(seq, ",ssd_spread");
+	else if (btrfs_test_opt(root, SSD))
 		seq_puts(seq, ",ssd");
 	if (btrfs_test_opt(root, NOTREELOG))
-		seq_puts(seq, ",no-treelog");
+		seq_puts(seq, ",notreelog");
 	if (btrfs_test_opt(root, FLUSHONCOMMIT))
-		seq_puts(seq, ",flush-on-commit");
+		seq_puts(seq, ",flushoncommit");
 	if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
 		seq_puts(seq, ",noacl");
 	return 0;
 }
 
-static void btrfs_write_super(struct super_block *sb)
-{
-	sb->s_dirt = 0;
-}
-
 static int btrfs_test_super(struct super_block *s, void *data)
 {
 	struct btrfs_fs_devices *test_fs_devices = data;
@@ -584,7 +584,8 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data)
 		if (btrfs_super_log_root(&root->fs_info->super_copy) != 0)
 			return -EINVAL;
 
-		ret = btrfs_cleanup_reloc_trees(root);
+		/* recover relocation */
+		ret = btrfs_recover_relocation(root);
 		WARN_ON(ret);
 
 		ret = btrfs_cleanup_fs_roots(root->fs_info);
@@ -678,7 +679,6 @@ static int btrfs_unfreeze(struct super_block *sb)
 static struct super_operations btrfs_super_ops = {
 	.delete_inode	= btrfs_delete_inode,
 	.put_super	= btrfs_put_super,
-	.write_super	= btrfs_write_super,
 	.sync_fs	= btrfs_sync_fs,
 	.show_options	= btrfs_show_options,
 	.write_inode	= btrfs_write_inode,
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 01b143605ec..2e177d7f4bb 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -25,7 +25,6 @@
 #include "disk-io.h"
 #include "transaction.h"
 #include "locking.h"
-#include "ref-cache.h"
 #include "tree-log.h"
 
 #define BTRFS_ROOT_TRANS_TAG 0
@@ -94,45 +93,37 @@ static noinline int join_transaction(struct btrfs_root *root)
  * to make sure the old root from before we joined the transaction is deleted
  * when the transaction commits
  */
-noinline int btrfs_record_root_in_trans(struct btrfs_root *root)
+static noinline int record_root_in_trans(struct btrfs_trans_handle *trans,
+					 struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
-	u64 running_trans_id = root->fs_info->running_transaction->transid;
-	if (root->ref_cows && root->last_trans < running_trans_id) {
+	if (root->ref_cows && root->last_trans < trans->transid) {
 		WARN_ON(root == root->fs_info->extent_root);
-		if (root->root_item.refs != 0) {
-			radix_tree_tag_set(&root->fs_info->fs_roots_radix,
-				   (unsigned long)root->root_key.objectid,
-				   BTRFS_ROOT_TRANS_TAG);
-
-			dirty = kmalloc(sizeof(*dirty), GFP_NOFS);
-			BUG_ON(!dirty);
-			dirty->root = kmalloc(sizeof(*dirty->root), GFP_NOFS);
-			BUG_ON(!dirty->root);
-			dirty->latest_root = root;
-			INIT_LIST_HEAD(&dirty->list);
-
-			root->commit_root = btrfs_root_node(root);
-
-			memcpy(dirty->root, root, sizeof(*root));
-			spin_lock_init(&dirty->root->node_lock);
-			spin_lock_init(&dirty->root->list_lock);
-			mutex_init(&dirty->root->objectid_mutex);
-			mutex_init(&dirty->root->log_mutex);
-			INIT_LIST_HEAD(&dirty->root->dead_list);
-			dirty->root->node = root->commit_root;
-			dirty->root->commit_root = NULL;
+		WARN_ON(root->root_item.refs == 0);
+		WARN_ON(root->commit_root != root->node);
+
+		radix_tree_tag_set(&root->fs_info->fs_roots_radix,
+			   (unsigned long)root->root_key.objectid,
+			   BTRFS_ROOT_TRANS_TAG);
+		root->last_trans = trans->transid;
+		btrfs_init_reloc_root(trans, root);
+	}
+	return 0;
+}
 
-			spin_lock(&root->list_lock);
-			list_add(&dirty->root->dead_list, &root->dead_list);
-			spin_unlock(&root->list_lock);
+int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+			       struct btrfs_root *root)
+{
+	if (!root->ref_cows)
+		return 0;
 
-			root->dirty_root = dirty;
-		} else {
-			WARN_ON(1);
-		}
-		root->last_trans = running_trans_id;
+	mutex_lock(&root->fs_info->trans_mutex);
+	if (root->last_trans == trans->transid) {
+		mutex_unlock(&root->fs_info->trans_mutex);
+		return 0;
 	}
+
+	record_root_in_trans(trans, root);
+	mutex_unlock(&root->fs_info->trans_mutex);
 	return 0;
 }
 
@@ -181,7 +172,6 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
 	ret = join_transaction(root);
 	BUG_ON(ret);
 
-	btrfs_record_root_in_trans(root);
 	h->transid = root->fs_info->running_transaction->transid;
 	h->transaction = root->fs_info->running_transaction;
 	h->blocks_reserved = num_blocks;
@@ -192,6 +182,7 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
 	h->delayed_ref_updates = 0;
 
 	root->fs_info->running_transaction->use_count++;
+	record_root_in_trans(h, root);
 	mutex_unlock(&root->fs_info->trans_mutex);
 	return h;
 }
@@ -233,6 +224,7 @@ static noinline int wait_for_commit(struct btrfs_root *root,
 	return 0;
 }
 
+#if 0
 /*
  * rate limit against the drop_snapshot code.  This helps to slow down new
  * operations if the drop_snapshot code isn't able to keep up.
@@ -273,6 +265,7 @@ harder:
 			goto harder;
 	}
 }
+#endif
 
 void btrfs_throttle(struct btrfs_root *root)
 {
@@ -280,7 +273,6 @@ void btrfs_throttle(struct btrfs_root *root)
 	if (!root->fs_info->open_ioctl_trans)
 		wait_current_trans(root);
 	mutex_unlock(&root->fs_info->trans_mutex);
-	throttle_on_drops(root);
 }
 
 static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
@@ -323,9 +315,6 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
 	memset(trans, 0, sizeof(*trans));
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
 
-	if (throttle)
-		throttle_on_drops(root);
-
 	return 0;
 }
 
@@ -462,12 +451,8 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 		old_root_bytenr = btrfs_root_bytenr(&root->root_item);
 		if (old_root_bytenr == root->node->start)
 			break;
-		btrfs_set_root_bytenr(&root->root_item,
-				       root->node->start);
-		btrfs_set_root_level(&root->root_item,
-				     btrfs_header_level(root->node));
-		btrfs_set_root_generation(&root->root_item, trans->transid);
 
+		btrfs_set_root_node(&root->root_item, root->node);
 		ret = btrfs_update_root(trans, tree_root,
 					&root->root_key,
 					&root->root_item);
@@ -477,14 +462,16 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 		ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
 		BUG_ON(ret);
 	}
+	free_extent_buffer(root->commit_root);
+	root->commit_root = btrfs_root_node(root);
 	return 0;
 }
 
 /*
  * update all the cowonly tree roots on disk
  */
-int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
-			    struct btrfs_root *root)
+static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans,
+					 struct btrfs_root *root)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct list_head *next;
@@ -520,118 +507,54 @@ int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
  * a dirty root struct and adds it into the list of dead roots that need to
  * be deleted
  */
-int btrfs_add_dead_root(struct btrfs_root *root, struct btrfs_root *latest)
+int btrfs_add_dead_root(struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
-
-	dirty = kmalloc(sizeof(*dirty), GFP_NOFS);
-	if (!dirty)
-		return -ENOMEM;
-	dirty->root = root;
-	dirty->latest_root = latest;
-
 	mutex_lock(&root->fs_info->trans_mutex);
-	list_add(&dirty->list, &latest->fs_info->dead_roots);
+	list_add(&root->root_list, &root->fs_info->dead_roots);
 	mutex_unlock(&root->fs_info->trans_mutex);
 	return 0;
 }
 
 /*
- * at transaction commit time we need to schedule the old roots for
- * deletion via btrfs_drop_snapshot.  This runs through all the
- * reference counted roots that were modified in the current
- * transaction and puts them into the drop list
+ * update all the cowonly tree roots on disk
  */
-static noinline int add_dirty_roots(struct btrfs_trans_handle *trans,
-				    struct radix_tree_root *radix,
-				    struct list_head *list)
+static noinline int commit_fs_roots(struct btrfs_trans_handle *trans,
+				    struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
 	struct btrfs_root *gang[8];
-	struct btrfs_root *root;
+	struct btrfs_fs_info *fs_info = root->fs_info;
 	int i;
 	int ret;
 	int err = 0;
-	u32 refs;
 
 	while (1) {
-		ret = radix_tree_gang_lookup_tag(radix, (void **)gang, 0,
+		ret = radix_tree_gang_lookup_tag(&fs_info->fs_roots_radix,
+						 (void **)gang, 0,
 						 ARRAY_SIZE(gang),
 						 BTRFS_ROOT_TRANS_TAG);
 		if (ret == 0)
 			break;
 		for (i = 0; i < ret; i++) {
 			root = gang[i];
-			radix_tree_tag_clear(radix,
-				     (unsigned long)root->root_key.objectid,
-				     BTRFS_ROOT_TRANS_TAG);
-
-			BUG_ON(!root->ref_tree);
-			dirty = root->dirty_root;
+			radix_tree_tag_clear(&fs_info->fs_roots_radix,
+					(unsigned long)root->root_key.objectid,
+					BTRFS_ROOT_TRANS_TAG);
 
 			btrfs_free_log(trans, root);
-			btrfs_free_reloc_root(trans, root);
-
-			if (root->commit_root == root->node) {
-				WARN_ON(root->node->start !=
-					btrfs_root_bytenr(&root->root_item));
-
-				free_extent_buffer(root->commit_root);
-				root->commit_root = NULL;
-				root->dirty_root = NULL;
-
-				spin_lock(&root->list_lock);
-				list_del_init(&dirty->root->dead_list);
-				spin_unlock(&root->list_lock);
+			btrfs_update_reloc_root(trans, root);
 
-				kfree(dirty->root);
-				kfree(dirty);
-
-				/* make sure to update the root on disk
-				 * so we get any updates to the block used
-				 * counts
-				 */
-				err = btrfs_update_root(trans,
-						root->fs_info->tree_root,
-						&root->root_key,
-						&root->root_item);
+			if (root->commit_root == root->node)
 				continue;
-			}
 
-			memset(&root->root_item.drop_progress, 0,
-			       sizeof(struct btrfs_disk_key));
-			root->root_item.drop_level = 0;
-			root->commit_root = NULL;
-			root->dirty_root = NULL;
-			root->root_key.offset = root->fs_info->generation;
-			btrfs_set_root_bytenr(&root->root_item,
-					      root->node->start);
-			btrfs_set_root_level(&root->root_item,
-					     btrfs_header_level(root->node));
-			btrfs_set_root_generation(&root->root_item,
-						  root->root_key.offset);
-
-			err = btrfs_insert_root(trans, root->fs_info->tree_root,
+			free_extent_buffer(root->commit_root);
+			root->commit_root = btrfs_root_node(root);
+
+			btrfs_set_root_node(&root->root_item, root->node);
+			err = btrfs_update_root(trans, fs_info->tree_root,
 						&root->root_key,
 						&root->root_item);
 			if (err)
 				break;
-
-			refs = btrfs_root_refs(&dirty->root->root_item);
-			btrfs_set_root_refs(&dirty->root->root_item, refs - 1);
-			err = btrfs_update_root(trans, root->fs_info->tree_root,
-						&dirty->root->root_key,
-						&dirty->root->root_item);
-
-			BUG_ON(err);
-			if (refs == 1) {
-				list_add(&dirty->list, list);
-			} else {
-				WARN_ON(1);
-				free_extent_buffer(dirty->root->node);
-				kfree(dirty->root);
-				kfree(dirty);
-			}
 		}
 	}
 	return err;
@@ -688,12 +611,8 @@ static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info)
 				TASK_UNINTERRUPTIBLE);
 		mutex_unlock(&info->trans_mutex);
 
-		atomic_dec(&info->throttles);
-		wake_up(&info->transaction_throttle);
-
 		schedule();
 
-		atomic_inc(&info->throttles);
 		mutex_lock(&info->trans_mutex);
 		finish_wait(&info->transaction_wait, &wait);
 	}
@@ -705,111 +624,61 @@ static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info)
  * Given a list of roots that need to be deleted, call btrfs_drop_snapshot on
  * all of them
  */
-static noinline int drop_dirty_roots(struct btrfs_root *tree_root,
-				     struct list_head *list)
+int btrfs_drop_dead_root(struct btrfs_root *root)
 {
-	struct btrfs_dirty_root *dirty;
 	struct btrfs_trans_handle *trans;
+	struct btrfs_root *tree_root = root->fs_info->tree_root;
 	unsigned long nr;
-	u64 num_bytes;
-	u64 bytes_used;
-	u64 max_useless;
-	int ret = 0;
-	int err;
-
-	while (!list_empty(list)) {
-		struct btrfs_root *root;
-
-		dirty = list_entry(list->prev, struct btrfs_dirty_root, list);
-		list_del_init(&dirty->list);
-
-		num_bytes = btrfs_root_used(&dirty->root->root_item);
-		root = dirty->latest_root;
-		atomic_inc(&root->fs_info->throttles);
-
-		while (1) {
-			/*
-			 * we don't want to jump in and create a bunch of
-			 * delayed refs if the transaction is starting to close
-			 */
-			wait_transaction_pre_flush(tree_root->fs_info);
-			trans = btrfs_start_transaction(tree_root, 1);
-
-			/*
-			 * we've joined a transaction, make sure it isn't
-			 * closing right now
-			 */
-			if (trans->transaction->delayed_refs.flushing) {
-				btrfs_end_transaction(trans, tree_root);
-				continue;
-			}
-
-			mutex_lock(&root->fs_info->drop_mutex);
-			ret = btrfs_drop_snapshot(trans, dirty->root);
-			if (ret != -EAGAIN)
-				break;
-			mutex_unlock(&root->fs_info->drop_mutex);
+	int ret;
 
-			err = btrfs_update_root(trans,
-					tree_root,
-					&dirty->root->root_key,
-					&dirty->root->root_item);
-			if (err)
-				ret = err;
-			nr = trans->blocks_used;
-			ret = btrfs_end_transaction(trans, tree_root);
-			BUG_ON(ret);
+	while (1) {
+		/*
+		 * we don't want to jump in and create a bunch of
+		 * delayed refs if the transaction is starting to close
+		 */
+		wait_transaction_pre_flush(tree_root->fs_info);
+		trans = btrfs_start_transaction(tree_root, 1);
 
-			btrfs_btree_balance_dirty(tree_root, nr);
-			cond_resched();
+		/*
+		 * we've joined a transaction, make sure it isn't
+		 * closing right now
+		 */
+		if (trans->transaction->delayed_refs.flushing) {
+			btrfs_end_transaction(trans, tree_root);
+			continue;
 		}
-		BUG_ON(ret);
-		atomic_dec(&root->fs_info->throttles);
-		wake_up(&root->fs_info->transaction_throttle);
 
-		num_bytes -= btrfs_root_used(&dirty->root->root_item);
-		bytes_used = btrfs_root_used(&root->root_item);
-		if (num_bytes) {
-			mutex_lock(&root->fs_info->trans_mutex);
-			btrfs_record_root_in_trans(root);
-			mutex_unlock(&root->fs_info->trans_mutex);
-			btrfs_set_root_used(&root->root_item,
-					    bytes_used - num_bytes);
-		}
+		ret = btrfs_drop_snapshot(trans, root);
+		if (ret != -EAGAIN)
+			break;
 
-		ret = btrfs_del_root(trans, tree_root, &dirty->root->root_key);
-		if (ret) {
-			BUG();
+		ret = btrfs_update_root(trans, tree_root,
+					&root->root_key,
+					&root->root_item);
+		if (ret)
 			break;
-		}
-		mutex_unlock(&root->fs_info->drop_mutex);
-
-		spin_lock(&root->list_lock);
-		list_del_init(&dirty->root->dead_list);
-		if (!list_empty(&root->dead_list)) {
-			struct btrfs_root *oldest;
-			oldest = list_entry(root->dead_list.prev,
-					    struct btrfs_root, dead_list);
-			max_useless = oldest->root_key.offset - 1;
-		} else {
-			max_useless = root->root_key.offset - 1;
-		}
-		spin_unlock(&root->list_lock);
 
 		nr = trans->blocks_used;
 		ret = btrfs_end_transaction(trans, tree_root);
 		BUG_ON(ret);
 
-		ret = btrfs_remove_leaf_refs(root, max_useless, 0);
-		BUG_ON(ret);
-
-		free_extent_buffer(dirty->root->node);
-		kfree(dirty->root);
-		kfree(dirty);
-
 		btrfs_btree_balance_dirty(tree_root, nr);
 		cond_resched();
 	}
+	BUG_ON(ret);
+
+	ret = btrfs_del_root(trans, tree_root, &root->root_key);
+	BUG_ON(ret);
+
+	nr = trans->blocks_used;
+	ret = btrfs_end_transaction(trans, tree_root);
+	BUG_ON(ret);
+
+	free_extent_buffer(root->node);
+	free_extent_buffer(root->commit_root);
+	kfree(root);
+
+	btrfs_btree_balance_dirty(tree_root, nr);
 	return ret;
 }
 
@@ -839,24 +708,23 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	if (ret)
 		goto fail;
 
-	btrfs_record_root_in_trans(root);
+	record_root_in_trans(trans, root);
 	btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
 	memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
 
 	key.objectid = objectid;
-	key.offset = trans->transid;
+	key.offset = 0;
 	btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
 
 	old = btrfs_lock_root_node(root);
 	btrfs_cow_block(trans, root, old, NULL, 0, &old);
+	btrfs_set_lock_blocking(old);
 
 	btrfs_copy_root(trans, root, old, &tmp, objectid);
 	btrfs_tree_unlock(old);
 	free_extent_buffer(old);
 
-	btrfs_set_root_bytenr(new_root_item, tmp->start);
-	btrfs_set_root_level(new_root_item, btrfs_header_level(tmp));
-	btrfs_set_root_generation(new_root_item, trans->transid);
+	btrfs_set_root_node(new_root_item, tmp);
 	ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
 				new_root_item);
 	btrfs_tree_unlock(tmp);
@@ -964,6 +832,24 @@ static noinline int finish_pending_snapshots(struct btrfs_trans_handle *trans,
 	return 0;
 }
 
+static void update_super_roots(struct btrfs_root *root)
+{
+	struct btrfs_root_item *root_item;
+	struct btrfs_super_block *super;
+
+	super = &root->fs_info->super_copy;
+
+	root_item = &root->fs_info->chunk_root->root_item;
+	super->chunk_root = root_item->bytenr;
+	super->chunk_root_generation = root_item->generation;
+	super->chunk_root_level = root_item->level;
+
+	root_item = &root->fs_info->tree_root->root_item;
+	super->root = root_item->bytenr;
+	super->generation = root_item->generation;
+	super->root_level = root_item->level;
+}
+
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root)
 {
@@ -971,8 +857,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	unsigned long timeout = 1;
 	struct btrfs_transaction *cur_trans;
 	struct btrfs_transaction *prev_trans = NULL;
-	struct btrfs_root *chunk_root = root->fs_info->chunk_root;
-	struct list_head dirty_fs_roots;
 	struct extent_io_tree *pinned_copy;
 	DEFINE_WAIT(wait);
 	int ret;
@@ -999,7 +883,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	BUG_ON(ret);
 
 	mutex_lock(&root->fs_info->trans_mutex);
-	INIT_LIST_HEAD(&dirty_fs_roots);
 	if (cur_trans->in_commit) {
 		cur_trans->use_count++;
 		mutex_unlock(&root->fs_info->trans_mutex);
@@ -1105,41 +988,36 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	 * with the tree-log code.
 	 */
 	mutex_lock(&root->fs_info->tree_log_mutex);
-	/*
-	 * keep tree reloc code from adding new reloc trees
-	 */
-	mutex_lock(&root->fs_info->tree_reloc_mutex);
-
 
-	ret = add_dirty_roots(trans, &root->fs_info->fs_roots_radix,
-			      &dirty_fs_roots);
+	ret = commit_fs_roots(trans, root);
 	BUG_ON(ret);
 
-	/* add_dirty_roots gets rid of all the tree log roots, it is now
+	/* commit_fs_roots gets rid of all the tree log roots, it is now
 	 * safe to free the root of tree log roots
 	 */
 	btrfs_free_log_root_tree(trans, root->fs_info);
 
-	ret = btrfs_commit_tree_roots(trans, root);
+	ret = commit_cowonly_roots(trans, root);
 	BUG_ON(ret);
 
 	cur_trans = root->fs_info->running_transaction;
 	spin_lock(&root->fs_info->new_trans_lock);
 	root->fs_info->running_transaction = NULL;
 	spin_unlock(&root->fs_info->new_trans_lock);
-	btrfs_set_super_generation(&root->fs_info->super_copy,
-				   cur_trans->transid);
-	btrfs_set_super_root(&root->fs_info->super_copy,
-			     root->fs_info->tree_root->node->start);
-	btrfs_set_super_root_level(&root->fs_info->super_copy,
-			   btrfs_header_level(root->fs_info->tree_root->node));
-
-	btrfs_set_super_chunk_root(&root->fs_info->super_copy,
-				   chunk_root->node->start);
-	btrfs_set_super_chunk_root_level(&root->fs_info->super_copy,
-					 btrfs_header_level(chunk_root->node));
-	btrfs_set_super_chunk_root_generation(&root->fs_info->super_copy,
-				btrfs_header_generation(chunk_root->node));
+
+	btrfs_set_root_node(&root->fs_info->tree_root->root_item,
+			    root->fs_info->tree_root->node);
+	free_extent_buffer(root->fs_info->tree_root->commit_root);
+	root->fs_info->tree_root->commit_root =
+				btrfs_root_node(root->fs_info->tree_root);
+
+	btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
+			    root->fs_info->chunk_root->node);
+	free_extent_buffer(root->fs_info->chunk_root->commit_root);
+	root->fs_info->chunk_root->commit_root =
+				btrfs_root_node(root->fs_info->chunk_root);
+
+	update_super_roots(root);
 
 	if (!root->fs_info->log_root_recovering) {
 		btrfs_set_super_log_root(&root->fs_info->super_copy, 0);
@@ -1153,7 +1031,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	trans->transaction->blocked = 0;
 
-	wake_up(&root->fs_info->transaction_throttle);
 	wake_up(&root->fs_info->transaction_wait);
 
 	mutex_unlock(&root->fs_info->trans_mutex);
@@ -1170,9 +1047,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	btrfs_finish_extent_commit(trans, root, pinned_copy);
 	kfree(pinned_copy);
 
-	btrfs_drop_dead_reloc_roots(root);
-	mutex_unlock(&root->fs_info->tree_reloc_mutex);
-
 	/* do the directory inserts of any pending snapshot creations */
 	finish_pending_snapshots(trans, root->fs_info);
 
@@ -1186,16 +1060,9 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	put_transaction(cur_trans);
 	put_transaction(cur_trans);
 
-	list_splice_init(&dirty_fs_roots, &root->fs_info->dead_roots);
-	if (root->fs_info->closing)
-		list_splice_init(&root->fs_info->dead_roots, &dirty_fs_roots);
-
 	mutex_unlock(&root->fs_info->trans_mutex);
 
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
-
-	if (root->fs_info->closing)
-		drop_dirty_roots(root->fs_info->tree_root, &dirty_fs_roots);
 	return ret;
 }
 
@@ -1204,16 +1071,17 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
  */
 int btrfs_clean_old_snapshots(struct btrfs_root *root)
 {
-	struct list_head dirty_roots;
-	INIT_LIST_HEAD(&dirty_roots);
-again:
-	mutex_lock(&root->fs_info->trans_mutex);
-	list_splice_init(&root->fs_info->dead_roots, &dirty_roots);
-	mutex_unlock(&root->fs_info->trans_mutex);
+	LIST_HEAD(list);
+	struct btrfs_fs_info *fs_info = root->fs_info;
+
+	mutex_lock(&fs_info->trans_mutex);
+	list_splice_init(&fs_info->dead_roots, &list);
+	mutex_unlock(&fs_info->trans_mutex);
 
-	if (!list_empty(&dirty_roots)) {
-		drop_dirty_roots(root, &dirty_roots);
-		goto again;
+	while (!list_empty(&list)) {
+		root = list_entry(list.next, struct btrfs_root, root_list);
+		list_del_init(&root->root_list);
+		btrfs_drop_dead_root(root);
 	}
 	return 0;
 }
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 94f5bde2b58..961c3ee5a2e 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -62,12 +62,6 @@ struct btrfs_pending_snapshot {
 	struct list_head list;
 };
 
-struct btrfs_dirty_root {
-	struct list_head list;
-	struct btrfs_root *root;
-	struct btrfs_root *latest_root;
-};
-
 static inline void btrfs_set_trans_block_group(struct btrfs_trans_handle *trans,
 					       struct inode *inode)
 {
@@ -100,7 +94,8 @@ int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
 int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
 			    struct btrfs_root *root);
 
-int btrfs_add_dead_root(struct btrfs_root *root, struct btrfs_root *latest);
+int btrfs_add_dead_root(struct btrfs_root *root);
+int btrfs_drop_dead_root(struct btrfs_root *root);
 int btrfs_defrag_root(struct btrfs_root *root, int cacheonly);
 int btrfs_clean_old_snapshots(struct btrfs_root *root);
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
@@ -108,7 +103,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root);
 void btrfs_throttle(struct btrfs_root *root);
-int btrfs_record_root_in_trans(struct btrfs_root *root);
+int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root);
 int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 					struct extent_io_tree *dirty_pages);
 #endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index db5e212e844..c13922206d1 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -430,18 +430,16 @@ no_copy:
 static noinline struct inode *read_one_inode(struct btrfs_root *root,
 					     u64 objectid)
 {
+	struct btrfs_key key;
 	struct inode *inode;
-	inode = btrfs_iget_locked(root->fs_info->sb, objectid, root);
-	if (inode->i_state & I_NEW) {
-		BTRFS_I(inode)->root = root;
-		BTRFS_I(inode)->location.objectid = objectid;
-		BTRFS_I(inode)->location.type = BTRFS_INODE_ITEM_KEY;
-		BTRFS_I(inode)->location.offset = 0;
-		btrfs_read_locked_inode(inode);
-		unlock_new_inode(inode);
 
-	}
-	if (is_bad_inode(inode)) {
+	key.objectid = objectid;
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.offset = 0;
+	inode = btrfs_iget(root->fs_info->sb, &key, root);
+	if (IS_ERR(inode)) {
+		inode = NULL;
+	} else if (is_bad_inode(inode)) {
 		iput(inode);
 		inode = NULL;
 	}
@@ -541,6 +539,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 
 	if (found_type == BTRFS_FILE_EXTENT_REG ||
 	    found_type == BTRFS_FILE_EXTENT_PREALLOC) {
+		u64 offset;
 		unsigned long dest_offset;
 		struct btrfs_key ins;
 
@@ -555,6 +554,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 		ins.objectid = btrfs_file_extent_disk_bytenr(eb, item);
 		ins.offset = btrfs_file_extent_disk_num_bytes(eb, item);
 		ins.type = BTRFS_EXTENT_ITEM_KEY;
+		offset = key->offset - btrfs_file_extent_offset(eb, item);
 
 		if (ins.objectid > 0) {
 			u64 csum_start;
@@ -569,19 +569,16 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 			if (ret == 0) {
 				ret = btrfs_inc_extent_ref(trans, root,
 						ins.objectid, ins.offset,
-						path->nodes[0]->start,
-						root->root_key.objectid,
-						trans->transid, key->objectid);
+						0, root->root_key.objectid,
+						key->objectid, offset);
 			} else {
 				/*
 				 * insert the extent pointer in the extent
 				 * allocation tree
 				 */
-				ret = btrfs_alloc_logged_extent(trans, root,
-						path->nodes[0]->start,
-						root->root_key.objectid,
-						trans->transid, key->objectid,
-						&ins);
+				ret = btrfs_alloc_logged_file_extent(trans,
+						root, root->root_key.objectid,
+						key->objectid, offset, &ins);
 				BUG_ON(ret);
 			}
 			btrfs_release_path(root, path);
@@ -1706,9 +1703,6 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans,
 				btrfs_wait_tree_block_writeback(next);
 				btrfs_tree_unlock(next);
 
-				ret = btrfs_drop_leaf_ref(trans, root, next);
-				BUG_ON(ret);
-
 				WARN_ON(root_owner !=
 					BTRFS_TREE_LOG_OBJECTID);
 				ret = btrfs_free_reserved_extent(root,
@@ -1753,10 +1747,6 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans,
 		btrfs_wait_tree_block_writeback(next);
 		btrfs_tree_unlock(next);
 
-		if (*level == 0) {
-			ret = btrfs_drop_leaf_ref(trans, root, next);
-			BUG_ON(ret);
-		}
 		WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
 		ret = btrfs_free_reserved_extent(root, bytenr, blocksize);
 		BUG_ON(ret);
@@ -1811,12 +1801,6 @@ static noinline int walk_up_log_tree(struct btrfs_trans_handle *trans,
 				btrfs_wait_tree_block_writeback(next);
 				btrfs_tree_unlock(next);
 
-				if (*level == 0) {
-					ret = btrfs_drop_leaf_ref(trans, root,
-								  next);
-					BUG_ON(ret);
-				}
-
 				WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
 				ret = btrfs_free_reserved_extent(root,
 						path->nodes[*level]->start,
@@ -1884,11 +1868,6 @@ static int walk_log_tree(struct btrfs_trans_handle *trans,
 			btrfs_wait_tree_block_writeback(next);
 			btrfs_tree_unlock(next);
 
-			if (orig_level == 0) {
-				ret = btrfs_drop_leaf_ref(trans, log,
-							  next);
-				BUG_ON(ret);
-			}
 			WARN_ON(log->root_key.objectid !=
 				BTRFS_TREE_LOG_OBJECTID);
 			ret = btrfs_free_reserved_extent(log, next->start,
@@ -2027,9 +2006,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
 	ret = btrfs_write_and_wait_marked_extents(log, &log->dirty_log_pages);
 	BUG_ON(ret);
 
-	btrfs_set_root_bytenr(&log->root_item, log->node->start);
-	btrfs_set_root_generation(&log->root_item, trans->transid);
-	btrfs_set_root_level(&log->root_item, btrfs_header_level(log->node));
+	btrfs_set_root_node(&log->root_item, log->node);
 
 	root->log_batch = 0;
 	root->log_transid++;
@@ -2581,7 +2558,7 @@ static noinline int copy_items(struct btrfs_trans_handle *trans,
 				       ins_keys, ins_sizes, nr);
 	BUG_ON(ret);
 
-	for (i = 0; i < nr; i++) {
+	for (i = 0; i < nr; i++, dst_path->slots[0]++) {
 		dst_offset = btrfs_item_ptr_offset(dst_path->nodes[0],
 						   dst_path->slots[0]);
 
@@ -2617,36 +2594,31 @@ static noinline int copy_items(struct btrfs_trans_handle *trans,
 			found_type = btrfs_file_extent_type(src, extent);
 			if (found_type == BTRFS_FILE_EXTENT_REG ||
 			    found_type == BTRFS_FILE_EXTENT_PREALLOC) {
-				u64 ds = btrfs_file_extent_disk_bytenr(src,
-								   extent);
-				u64 dl = btrfs_file_extent_disk_num_bytes(src,
-								      extent);
-				u64 cs = btrfs_file_extent_offset(src, extent);
-				u64 cl = btrfs_file_extent_num_bytes(src,
-								     extent);;
+				u64 ds, dl, cs, cl;
+				ds = btrfs_file_extent_disk_bytenr(src,
+								extent);
+				/* ds == 0 is a hole */
+				if (ds == 0)
+					continue;
+
+				dl = btrfs_file_extent_disk_num_bytes(src,
+								extent);
+				cs = btrfs_file_extent_offset(src, extent);
+				cl = btrfs_file_extent_num_bytes(src,
+								extent);;
 				if (btrfs_file_extent_compression(src,
 								  extent)) {
 					cs = 0;
 					cl = dl;
 				}
-				/* ds == 0 is a hole */
-				if (ds != 0) {
-					ret = btrfs_inc_extent_ref(trans, log,
-						   ds, dl,
-						   dst_path->nodes[0]->start,
-						   BTRFS_TREE_LOG_OBJECTID,
-						   trans->transid,
-						   ins_keys[i].objectid);
-					BUG_ON(ret);
-					ret = btrfs_lookup_csums_range(
-						   log->fs_info->csum_root,
-						   ds + cs, ds + cs + cl - 1,
-						   &ordered_sums);
-					BUG_ON(ret);
-				}
+
+				ret = btrfs_lookup_csums_range(
+						log->fs_info->csum_root,
+						ds + cs, ds + cs + cl - 1,
+						&ordered_sums);
+				BUG_ON(ret);
 			}
 		}
-		dst_path->slots[0]++;
 	}
 
 	btrfs_mark_buffer_dirty(dst_path->nodes[0]);
@@ -3029,9 +3001,7 @@ again:
 		BUG_ON(!wc.replay_dest);
 
 		wc.replay_dest->log_root = log;
-		mutex_lock(&fs_info->trans_mutex);
-		btrfs_record_root_in_trans(wc.replay_dest);
-		mutex_unlock(&fs_info->trans_mutex);
+		btrfs_record_root_in_trans(trans, wc.replay_dest);
 		ret = walk_log_tree(trans, log, &wc);
 		BUG_ON(ret);
 
@@ -3049,6 +3019,7 @@ again:
 		key.offset = found_key.offset - 1;
 		wc.replay_dest->log_root = NULL;
 		free_extent_buffer(log->node);
+		free_extent_buffer(log->commit_root);
 		kfree(log);
 
 		if (found_key.offset == 0)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 5f01dad4b69..3ab80e9cd76 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -161,8 +161,10 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 	int again = 0;
 	unsigned long num_run;
 	unsigned long num_sync_run;
+	unsigned long batch_run = 0;
 	unsigned long limit;
 	unsigned long last_waited = 0;
+	int force_reg = 0;
 
 	bdi = blk_get_backing_dev_info(device->bdev);
 	fs_info = device->dev_root->fs_info;
@@ -176,19 +178,22 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 
 loop:
 	spin_lock(&device->io_lock);
-	num_run = 0;
 
 loop_lock:
+	num_run = 0;
 
 	/* take all the bios off the list at once and process them
 	 * later on (without the lock held).  But, remember the
 	 * tail and other pointers so the bios can be properly reinserted
 	 * into the list if we hit congestion
 	 */
-	if (device->pending_sync_bios.head)
+	if (!force_reg && device->pending_sync_bios.head) {
 		pending_bios = &device->pending_sync_bios;
-	else
+		force_reg = 1;
+	} else {
 		pending_bios = &device->pending_bios;
+		force_reg = 0;
+	}
 
 	pending = pending_bios->head;
 	tail = pending_bios->tail;
@@ -228,10 +233,14 @@ loop_lock:
 	while (pending) {
 
 		rmb();
-		if (pending_bios != &device->pending_sync_bios &&
-		    device->pending_sync_bios.head &&
-		    num_run > 16) {
-			cond_resched();
+		/* we want to work on both lists, but do more bios on the
+		 * sync list than the regular list
+		 */
+		if ((num_run > 32 &&
+		    pending_bios != &device->pending_sync_bios &&
+		    device->pending_sync_bios.head) ||
+		   (num_run > 64 && pending_bios == &device->pending_sync_bios &&
+		    device->pending_bios.head)) {
 			spin_lock(&device->io_lock);
 			requeue_list(pending_bios, pending, tail);
 			goto loop_lock;
@@ -249,6 +258,8 @@ loop_lock:
 		BUG_ON(atomic_read(&cur->bi_cnt) == 0);
 		submit_bio(cur->bi_rw, cur);
 		num_run++;
+		batch_run++;
+
 		if (bio_sync(cur))
 			num_sync_run++;
 
@@ -265,7 +276,7 @@ loop_lock:
 		 * is now congested.  Back off and let other work structs
 		 * run instead
 		 */
-		if (pending && bdi_write_congested(bdi) && num_run > 16 &&
+		if (pending && bdi_write_congested(bdi) && batch_run > 32 &&
 		    fs_info->fs_devices->open_devices > 1) {
 			struct io_context *ioc;
 
@@ -366,6 +377,7 @@ static noinline int device_list_add(const char *path,
 		memcpy(fs_devices->fsid, disk_super->fsid, BTRFS_FSID_SIZE);
 		fs_devices->latest_devid = devid;
 		fs_devices->latest_trans = found_transid;
+		mutex_init(&fs_devices->device_list_mutex);
 		device = NULL;
 	} else {
 		device = __find_device(&fs_devices->devices, devid,
@@ -392,7 +404,11 @@ static noinline int device_list_add(const char *path,
 			return -ENOMEM;
 		}
 		INIT_LIST_HEAD(&device->dev_alloc_list);
+
+		mutex_lock(&fs_devices->device_list_mutex);
 		list_add(&device->dev_list, &fs_devices->devices);
+		mutex_unlock(&fs_devices->device_list_mutex);
+
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
 	}
@@ -418,10 +434,12 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 	INIT_LIST_HEAD(&fs_devices->devices);
 	INIT_LIST_HEAD(&fs_devices->alloc_list);
 	INIT_LIST_HEAD(&fs_devices->list);
+	mutex_init(&fs_devices->device_list_mutex);
 	fs_devices->latest_devid = orig->latest_devid;
 	fs_devices->latest_trans = orig->latest_trans;
 	memcpy(fs_devices->fsid, orig->fsid, sizeof(fs_devices->fsid));
 
+	mutex_lock(&orig->device_list_mutex);
 	list_for_each_entry(orig_dev, &orig->devices, dev_list) {
 		device = kzalloc(sizeof(*device), GFP_NOFS);
 		if (!device)
@@ -443,8 +461,10 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
 	}
+	mutex_unlock(&orig->device_list_mutex);
 	return fs_devices;
 error:
+	mutex_unlock(&orig->device_list_mutex);
 	free_fs_devices(fs_devices);
 	return ERR_PTR(-ENOMEM);
 }
@@ -455,6 +475,7 @@ int btrfs_close_extra_devices(struct btrfs_fs_devices *fs_devices)
 
 	mutex_lock(&uuid_mutex);
 again:
+	mutex_lock(&fs_devices->device_list_mutex);
 	list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
 		if (device->in_fs_metadata)
 			continue;
@@ -474,6 +495,7 @@ again:
 		kfree(device->name);
 		kfree(device);
 	}
+	mutex_unlock(&fs_devices->device_list_mutex);
 
 	if (fs_devices->seed) {
 		fs_devices = fs_devices->seed;
@@ -594,6 +616,9 @@ static int __btrfs_open_devices(struct btrfs_fs_devices *fs_devices,
 		device->in_fs_metadata = 0;
 		device->mode = flags;
 
+		if (!blk_queue_nonrot(bdev_get_queue(bdev)))
+			fs_devices->rotating = 1;
+
 		fs_devices->open_devices++;
 		if (device->writeable) {
 			fs_devices->rw_devices++;
@@ -1121,12 +1146,14 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path)
 
 		device = NULL;
 		devices = &root->fs_info->fs_devices->devices;
+		mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 		list_for_each_entry(tmp, devices, dev_list) {
 			if (tmp->in_fs_metadata && !tmp->bdev) {
 				device = tmp;
 				break;
 			}
 		}
+		mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 		bdev = NULL;
 		bh = NULL;
 		disk_super = NULL;
@@ -1181,7 +1208,16 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path)
 		goto error_brelse;
 
 	device->in_fs_metadata = 0;
+
+	/*
+	 * the device list mutex makes sure that we don't change
+	 * the device list while someone else is writing out all
+	 * the device supers.
+	 */
+	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 	list_del_init(&device->dev_list);
+	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
+
 	device->fs_devices->num_devices--;
 
 	next_device = list_entry(root->fs_info->fs_devices->devices.next,
@@ -1275,6 +1311,7 @@ static int btrfs_prepare_sprout(struct btrfs_trans_handle *trans,
 	seed_devices->opened = 1;
 	INIT_LIST_HEAD(&seed_devices->devices);
 	INIT_LIST_HEAD(&seed_devices->alloc_list);
+	mutex_init(&seed_devices->device_list_mutex);
 	list_splice_init(&fs_devices->devices, &seed_devices->devices);
 	list_splice_init(&fs_devices->alloc_list, &seed_devices->alloc_list);
 	list_for_each_entry(device, &seed_devices->devices, dev_list) {
@@ -1400,6 +1437,10 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	mutex_lock(&root->fs_info->volume_mutex);
 
 	devices = &root->fs_info->fs_devices->devices;
+	/*
+	 * we have the volume lock, so we don't need the extra
+	 * device list mutex while reading the list here.
+	 */
 	list_for_each_entry(device, devices, dev_list) {
 		if (device->bdev == bdev) {
 			ret = -EEXIST;
@@ -1440,6 +1481,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	device->io_align = root->sectorsize;
 	device->sector_size = root->sectorsize;
 	device->total_bytes = i_size_read(bdev->bd_inode);
+	device->disk_total_bytes = device->total_bytes;
 	device->dev_root = root->fs_info->dev_root;
 	device->bdev = bdev;
 	device->in_fs_metadata = 1;
@@ -1453,6 +1495,12 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	}
 
 	device->fs_devices = root->fs_info->fs_devices;
+
+	/*
+	 * we don't want write_supers to jump in here with our device
+	 * half setup
+	 */
+	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 	list_add(&device->dev_list, &root->fs_info->fs_devices->devices);
 	list_add(&device->dev_alloc_list,
 		 &root->fs_info->fs_devices->alloc_list);
@@ -1461,6 +1509,9 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	root->fs_info->fs_devices->rw_devices++;
 	root->fs_info->fs_devices->total_rw_bytes += device->total_bytes;
 
+	if (!blk_queue_nonrot(bdev_get_queue(bdev)))
+		root->fs_info->fs_devices->rotating = 1;
+
 	total_bytes = btrfs_super_total_bytes(&root->fs_info->super_copy);
 	btrfs_set_super_total_bytes(&root->fs_info->super_copy,
 				    total_bytes + device->total_bytes);
@@ -1468,6 +1519,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 	total_bytes = btrfs_super_num_devices(&root->fs_info->super_copy);
 	btrfs_set_super_num_devices(&root->fs_info->super_copy,
 				    total_bytes + 1);
+	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 
 	if (seeding_dev) {
 		ret = init_first_rw_device(trans, root, device);
@@ -1670,8 +1722,6 @@ static int btrfs_relocate_chunk(struct btrfs_root *root,
 	int ret;
 	int i;
 
-	printk(KERN_INFO "btrfs relocating chunk %llu\n",
-	       (unsigned long long)chunk_offset);
 	root = root->fs_info->chunk_root;
 	extent_root = root->fs_info->extent_root;
 	em_tree = &root->fs_info->mapping_tree.map_tree;
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 5c3ff6d02fd..5139a833f72 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -96,7 +96,12 @@ struct btrfs_fs_devices {
 	u64 rw_devices;
 	u64 total_rw_bytes;
 	struct block_device *latest_bdev;
-	/* all of the devices in the FS */
+
+	/* all of the devices in the FS, protected by a mutex
+	 * so we can safely walk it to write out the supers without
+	 * worrying about add/remove by the multi-device code
+	 */
+	struct mutex device_list_mutex;
 	struct list_head devices;
 
 	/* devices not currently being allocated */
@@ -107,6 +112,11 @@ struct btrfs_fs_devices {
 	int seeding;
 
 	int opened;
+
+	/* set when we find or add a device that doesn't have the
+	 * nonrot flag set
+	 */
+	int rotating;
 };
 
 struct btrfs_bio_stripe {
diff --git a/fs/buffer.c b/fs/buffer.c
index aed297739eb..a3ef091a45b 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1085,12 +1085,12 @@ static struct buffer_head *
 __getblk_slow(struct block_device *bdev, sector_t block, int size)
 {
 	/* Size must be multiple of hard sectorsize */
-	if (unlikely(size & (bdev_hardsect_size(bdev)-1) ||
+	if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
 			(size < 512 || size > PAGE_SIZE))) {
 		printk(KERN_ERR "getblk(): invalid block size %d requested\n",
 					size);
-		printk(KERN_ERR "hardsect size: %d\n",
-					bdev_hardsect_size(bdev));
+		printk(KERN_ERR "logical block size: %d\n",
+					bdev_logical_block_size(bdev));
 
 		dump_stack();
 		return NULL;
@@ -2736,6 +2736,8 @@ has_buffers:
 		pos += blocksize;
 	}
 
+	map_bh.b_size = blocksize;
+	map_bh.b_state = 0;
 	err = get_block(inode, iblock, &map_bh, 0);
 	if (err)
 		goto unlock;
@@ -2933,6 +2935,8 @@ int submit_bh(int rw, struct buffer_head * bh)
 	BUG_ON(!buffer_locked(bh));
 	BUG_ON(!buffer_mapped(bh));
 	BUG_ON(!bh->b_end_io);
+	BUG_ON(buffer_delay(bh));
+	BUG_ON(buffer_unwritten(bh));
 
 	/*
 	 * Mask in barrier bit for a write (could be either a WRITE or a
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 1e962348d11..431accd475a 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -354,7 +354,9 @@ static void cachefiles_sync_cache(struct fscache_cache *_cache)
 	/* make sure all pages pinned by operations on behalf of the netfs are
 	 * written to disc */
 	cachefiles_begin_secure(cache, &saved_cred);
-	ret = fsync_super(cache->mnt->mnt_sb);
+	down_read(&cache->mnt->mnt_sb->s_umount);
+	ret = sync_filesystem(cache->mnt->mnt_sb);
+	up_read(&cache->mnt->mnt_sb->s_umount);
 	cachefiles_end_secure(cache, saved_cred);
 
 	if (ret == -EIO)
diff --git a/fs/cachefiles/internal.h b/fs/cachefiles/internal.h
index 19218e1463d..f7c255f9c62 100644
--- a/fs/cachefiles/internal.h
+++ b/fs/cachefiles/internal.h
@@ -122,13 +122,13 @@ static inline void cachefiles_state_changed(struct cachefiles_cache *cache)
 }
 
 /*
- * cf-bind.c
+ * bind.c
  */
 extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args);
 extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache);
 
 /*
- * cf-daemon.c
+ * daemon.c
  */
 extern const struct file_operations cachefiles_daemon_fops;
 
@@ -136,17 +136,17 @@ extern int cachefiles_has_space(struct cachefiles_cache *cache,
 				unsigned fnr, unsigned bnr);
 
 /*
- * cf-interface.c
+ * interface.c
  */
 extern const struct fscache_cache_ops cachefiles_cache_ops;
 
 /*
- * cf-key.c
+ * key.c
  */
 extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type);
 
 /*
- * cf-namei.c
+ * namei.c
  */
 extern int cachefiles_delete_object(struct cachefiles_cache *cache,
 				    struct cachefiles_object *object);
@@ -165,7 +165,7 @@ extern int cachefiles_check_in_use(struct cachefiles_cache *cache,
 				   struct dentry *dir, char *filename);
 
 /*
- * cf-proc.c
+ * proc.c
  */
 #ifdef CONFIG_CACHEFILES_HISTOGRAM
 extern atomic_t cachefiles_lookup_histogram[HZ];
@@ -190,7 +190,7 @@ void cachefiles_hist(atomic_t histogram[], unsigned long start_jif)
 #endif
 
 /*
- * cf-rdwr.c
+ * rdwr.c
  */
 extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *,
 					 struct page *, gfp_t);
@@ -205,7 +205,7 @@ extern int cachefiles_write_page(struct fscache_storage *, struct page *);
 extern void cachefiles_uncache_page(struct fscache_object *, struct page *);
 
 /*
- * cf-security.c
+ * security.c
  */
 extern int cachefiles_get_security_ID(struct cachefiles_cache *cache);
 extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache,
@@ -225,7 +225,7 @@ static inline void cachefiles_end_secure(struct cachefiles_cache *cache,
 }
 
 /*
- * cf-xattr.c
+ * xattr.c
  */
 extern int cachefiles_check_object_type(struct cachefiles_object *object);
 extern int cachefiles_set_object_xattr(struct cachefiles_object *object,
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 38f71222a55..b7c9d5187a7 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -375,7 +375,6 @@ static int chrdev_open(struct inode *inode, struct file *filp)
 		p = inode->i_cdev;
 		if (!p) {
 			inode->i_cdev = p = new;
-			inode->i_cindex = idx;
 			list_add(&inode->i_devices, &p->list);
 			new = NULL;
 		} else if (!cdev_get(p))
@@ -405,6 +404,18 @@ static int chrdev_open(struct inode *inode, struct file *filp)
 	return ret;
 }
 
+int cdev_index(struct inode *inode)
+{
+	int idx;
+	struct kobject *kobj;
+
+	kobj = kobj_lookup(cdev_map, inode->i_rdev, &idx);
+	if (!kobj)
+		return -1;
+	kobject_put(kobj);
+	return idx;
+}
+
 void cd_forget(struct inode *inode)
 {
 	spin_lock(&cdev_lock);
@@ -557,6 +568,7 @@ EXPORT_SYMBOL(cdev_init);
 EXPORT_SYMBOL(cdev_alloc);
 EXPORT_SYMBOL(cdev_del);
 EXPORT_SYMBOL(cdev_add);
+EXPORT_SYMBOL(cdev_index);
 EXPORT_SYMBOL(register_chrdev);
 EXPORT_SYMBOL(unregister_chrdev);
 EXPORT_SYMBOL(directly_mappable_cdev_bdi);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index f20c4069c22..b4868983942 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,12 @@
+Version 1.59
+------------
+Client uses server inode numbers (which are persistent) rather than
+client generated ones by default (mount option "serverino" turned
+on by default if server supports it).  Add forceuid and forcegid
+mount options (so that when negotiating unix extensions specifying
+which uid mounted does not immediately force the server's reported
+uids to be overridden).
+
 Version 1.58
 ------------
 Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
@@ -10,6 +19,8 @@ we converted from).  Fix endianness of the vcnum field used during
 session setup to distinguish multiple mounts to same server from different
 userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
 flag to be set to 2, and mount must enable krb5 to turn on extended security).
+Performance of file create to Samba improved (posix create on lookup
+removes 1 of 2 network requests sent on file create)
  
 Version 1.57
 ------------
diff --git a/fs/cifs/README b/fs/cifs/README
index db208ddb989..ad92921dbde 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -262,7 +262,8 @@ A partial list of the supported mount options follows:
 		mount.	
   domain	Set the SMB/CIFS workgroup name prepended to the
 		username during CIFS session establishment
-  uid		Set the default uid for inodes. For mounts to servers
+  forceuid	Set the default uid for inodes based on the uid
+		passed in. For mounts to servers
 		which do support the CIFS Unix extensions, such as a
 		properly configured Samba server, the server provides
 		the uid, gid and mode so this parameter should  not be
@@ -292,6 +293,12 @@ A partial list of the supported mount options follows:
 		the client.  Note that the mount.cifs helper must be
 		at version 1.10 or higher to support specifying the uid
 		(or gid) in non-numeric form.
+  forcegid	(similar to above but for the groupid instead of uid)
+  uid		Set the default uid for inodes, and indicate to the
+		cifs kernel driver which local user mounted . If the server
+		supports the unix extensions the default uid is
+		not used to fill in the owner fields of inodes (files)
+		unless the "forceuid" parameter is specified.
   gid		Set the default gid for inodes (similar to above).
   file_mode     If CIFS Unix extensions are not supported by the server
 		this overrides the default mode for file inodes.
@@ -388,8 +395,13 @@ A partial list of the supported mount options follows:
 		or the CIFS Unix Extensions equivalent and for those
 		this mount option will have no effect.  Exporting cifs mounts
 		under nfsd requires this mount option on the cifs mount.
+		This is now the default if server supports the 
+		required network operation.
   noserverino   Client generates inode numbers (rather than using the actual one
-		from the server) by default.
+		from the server). These inode numbers will vary after
+		unmount or reboot which can confuse some applications,
+		but not all server filesystems support unique inode
+		numbers.
   setuids       If the CIFS Unix extensions are negotiated with the server
 		the client will attempt to set the effective uid and gid of
 		the local process on newly created files, directories, and
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 83d62759c7c..3bb11be8b6a 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -275,7 +275,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
 	case -EBUSY:
 		/* someone else made a mount here whilst we were busy */
 		while (d_mountpoint(nd->path.dentry) &&
-		       follow_down(&nd->path.mnt, &nd->path.dentry))
+		       follow_down(&nd->path))
 			;
 		err = 0;
 	default:
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 67bf93a40d2..4a4581cb2b5 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -23,6 +23,7 @@
 #include <linux/string.h>
 #include <keys/user-type.h>
 #include <linux/key-type.h>
+#include <linux/inet.h>
 #include "cifsglob.h"
 #include "cifs_spnego.h"
 #include "cifs_debug.h"
@@ -73,9 +74,6 @@ struct key_type cifs_spnego_key_type = {
  * strlen(";sec=ntlmsspi") */
 #define MAX_MECH_STR_LEN	13
 
-/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/128 */
-#define MAX_IPV6_ADDR_LEN	43
-
 /* strlen of "host=" */
 #define HOST_KEY_LEN		5
 
@@ -102,7 +100,7 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 	   host=hostname sec=mechanism uid=0xFF user=username */
 	desc_len = MAX_VER_STR_LEN +
 		   HOST_KEY_LEN + strlen(hostname) +
-		   IP_KEY_LEN + MAX_IPV6_ADDR_LEN +
+		   IP_KEY_LEN + INET6_ADDRSTRLEN +
 		   MAX_MECH_STR_LEN +
 		   UID_KEY_LEN + (sizeof(uid_t) * 2) +
 		   USER_KEY_LEN + strlen(sesInfo->userName) + 1;
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 57ecdc83c26..1403b5d86a7 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -552,130 +552,138 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
 	return rc;
 }
 
-
-/* Retrieve an ACL from the server */
-static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode,
-				       const char *path, const __u16 *pfid)
+static struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb,
+		__u16 fid, u32 *pacllen)
 {
-	struct cifsFileInfo *open_file = NULL;
-	bool unlock_file = false;
-	int xid;
-	int rc = -EIO;
-	__u16 fid;
-	struct super_block *sb;
-	struct cifs_sb_info *cifs_sb;
 	struct cifs_ntsd *pntsd = NULL;
+	int xid, rc;
+
+	xid = GetXid();
+	rc = CIFSSMBGetCIFSACL(xid, cifs_sb->tcon, fid, &pntsd, pacllen);
+	FreeXid(xid);
 
-	cFYI(1, ("get mode from ACL for %s", path));
 
-	if (inode == NULL)
-		return NULL;
+	cFYI(1, ("GetCIFSACL rc = %d ACL len %d", rc, *pacllen));
+	return pntsd;
+}
+
+static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb,
+		const char *path, u32 *pacllen)
+{
+	struct cifs_ntsd *pntsd = NULL;
+	int oplock = 0;
+	int xid, rc;
+	__u16 fid;
 
 	xid = GetXid();
-	if (pfid == NULL)
-		open_file = find_readable_file(CIFS_I(inode));
-	else
-		fid = *pfid;
 
-	sb = inode->i_sb;
-	if (sb == NULL) {
-		FreeXid(xid);
-		return NULL;
-	}
-	cifs_sb = CIFS_SB(sb);
-
-	if (open_file) {
-		unlock_file = true;
-		fid = open_file->netfid;
-	} else if (pfid == NULL) {
-		int oplock = 0;
-		/* open file */
-		rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN,
-				READ_CONTROL, 0, &fid, &oplock, NULL,
-				cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
-		if (rc != 0) {
-			cERROR(1, ("Unable to open file to get ACL"));
-			FreeXid(xid);
-			return NULL;
-		}
+	rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN, READ_CONTROL, 0,
+			 &fid, &oplock, NULL, cifs_sb->local_nls,
+			 cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+	if (rc) {
+		cERROR(1, ("Unable to open file to get ACL"));
+		goto out;
 	}
 
 	rc = CIFSSMBGetCIFSACL(xid, cifs_sb->tcon, fid, &pntsd, pacllen);
 	cFYI(1, ("GetCIFSACL rc = %d ACL len %d", rc, *pacllen));
-	if (unlock_file == true) /* find_readable_file increments ref count */
-		atomic_dec(&open_file->wrtPending);
-	else if (pfid == NULL) /* if opened above we have to close the handle */
-		CIFSSMBClose(xid, cifs_sb->tcon, fid);
-	/* else handle was passed in by caller */
 
+	CIFSSMBClose(xid, cifs_sb->tcon, fid);
+ out:
 	FreeXid(xid);
 	return pntsd;
 }
 
-/* Set an ACL on the server */
-static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
-				struct inode *inode, const char *path)
+/* Retrieve an ACL from the server */
+static struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
+				      struct inode *inode, const char *path,
+				      u32 *pacllen)
 {
-	struct cifsFileInfo *open_file;
-	bool unlock_file = false;
-	int xid;
-	int rc = -EIO;
-	__u16 fid;
-	struct super_block *sb;
-	struct cifs_sb_info *cifs_sb;
+	struct cifs_ntsd *pntsd = NULL;
+	struct cifsFileInfo *open_file = NULL;
 
-	cFYI(DBG2, ("set ACL for %s from mode 0x%x", path, inode->i_mode));
+	if (inode)
+		open_file = find_readable_file(CIFS_I(inode));
+	if (!open_file)
+		return get_cifs_acl_by_path(cifs_sb, path, pacllen);
 
-	if (!inode)
-		return rc;
+	pntsd = get_cifs_acl_by_fid(cifs_sb, open_file->netfid, pacllen);
+	atomic_dec(&open_file->wrtPending);
+	return pntsd;
+}
 
-	sb = inode->i_sb;
-	if (sb == NULL)
-		return rc;
+static int set_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb, __u16 fid,
+		struct cifs_ntsd *pnntsd, u32 acllen)
+{
+	int xid, rc;
 
-	cifs_sb = CIFS_SB(sb);
 	xid = GetXid();
+	rc = CIFSSMBSetCIFSACL(xid, cifs_sb->tcon, fid, pnntsd, acllen);
+	FreeXid(xid);
 
-	open_file = find_readable_file(CIFS_I(inode));
-	if (open_file) {
-		unlock_file = true;
-		fid = open_file->netfid;
-	} else {
-		int oplock = 0;
-		/* open file */
-		rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN,
-				WRITE_DAC, 0, &fid, &oplock, NULL,
-				cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
-		if (rc != 0) {
-			cERROR(1, ("Unable to open file to set ACL"));
-			FreeXid(xid);
-			return rc;
-		}
+	cFYI(DBG2, ("SetCIFSACL rc = %d", rc));
+	return rc;
+}
+
+static int set_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, const char *path,
+		struct cifs_ntsd *pnntsd, u32 acllen)
+{
+	int oplock = 0;
+	int xid, rc;
+	__u16 fid;
+
+	xid = GetXid();
+
+	rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN, WRITE_DAC, 0,
+			 &fid, &oplock, NULL, cifs_sb->local_nls,
+			 cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+	if (rc) {
+		cERROR(1, ("Unable to open file to set ACL"));
+		goto out;
 	}
 
 	rc = CIFSSMBSetCIFSACL(xid, cifs_sb->tcon, fid, pnntsd, acllen);
 	cFYI(DBG2, ("SetCIFSACL rc = %d", rc));
-	if (unlock_file)
-		atomic_dec(&open_file->wrtPending);
-	else
-		CIFSSMBClose(xid, cifs_sb->tcon, fid);
 
+	CIFSSMBClose(xid, cifs_sb->tcon, fid);
+ out:
 	FreeXid(xid);
+	return rc;
+}
 
+/* Set an ACL on the server */
+static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
+				struct inode *inode, const char *path)
+{
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsFileInfo *open_file;
+	int rc;
+
+	cFYI(DBG2, ("set ACL for %s from mode 0x%x", path, inode->i_mode));
+
+	open_file = find_readable_file(CIFS_I(inode));
+	if (!open_file)
+		return set_cifs_acl_by_path(cifs_sb, path, pnntsd, acllen);
+
+	rc = set_cifs_acl_by_fid(cifs_sb, open_file->netfid, pnntsd, acllen);
+	atomic_dec(&open_file->wrtPending);
 	return rc;
 }
 
 /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid)
+void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
+		     const char *path, const __u16 *pfid)
 {
 	struct cifs_ntsd *pntsd = NULL;
 	u32 acllen = 0;
 	int rc = 0;
 
 	cFYI(DBG2, ("converting ACL to mode for %s", path));
-	pntsd = get_cifs_acl(&acllen, inode, path, pfid);
+
+	if (pfid)
+		pntsd = get_cifs_acl_by_fid(cifs_sb, *pfid, &acllen);
+	else
+		pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen);
 
 	/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
 	if (pntsd)
@@ -698,7 +706,7 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 	cFYI(DBG2, ("set ACL from mode for %s", path));
 
 	/* Get the security descriptor */
-	pntsd = get_cifs_acl(&secdesclen, inode, path, NULL);
+	pntsd = get_cifs_acl(CIFS_SB(inode->i_sb), inode, path, &secdesclen);
 
 	/* Add three ACEs for owner, group, everyone getting rid of
 	   other ACEs as chmod disables ACEs and set the security descriptor */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 5e6d35804d7..0d92114195a 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -146,7 +146,7 @@ cifs_read_super(struct super_block *sb, void *data,
 #endif
 	sb->s_blocksize = CIFS_MAX_MSGSIZE;
 	sb->s_blocksize_bits = 14;	/* default 2**14 = CIFS_MAX_MSGSIZE */
-	inode = cifs_iget(sb, ROOT_I);
+	inode = cifs_root_iget(sb, ROOT_I);
 
 	if (IS_ERR(inode)) {
 		rc = PTR_ERR(inode);
@@ -204,6 +204,9 @@ cifs_put_super(struct super_block *sb)
 		cFYI(1, ("Empty cifs superblock info passed to unmount"));
 		return;
 	}
+
+	lock_kernel();
+
 	rc = cifs_umount(sb, cifs_sb);
 	if (rc)
 		cERROR(1, ("cifs_umount failed with return code %d", rc));
@@ -216,7 +219,8 @@ cifs_put_super(struct super_block *sb)
 
 	unload_nls(cifs_sb->local_nls);
 	kfree(cifs_sb);
-	return;
+
+	unlock_kernel();
 }
 
 static int
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 051b71cfdea..9570a0e8023 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -36,7 +36,7 @@ extern void cifs_read_inode(struct inode *);
 
 /* Functions related to inodes */
 extern const struct inode_operations cifs_dir_inode_ops;
-extern struct inode *cifs_iget(struct super_block *, unsigned long);
+extern struct inode *cifs_root_iget(struct super_block *, unsigned long);
 extern int cifs_create(struct inode *, struct dentry *, int,
 		       struct nameidata *);
 extern struct dentry *cifs_lookup(struct inode *, struct dentry *,
@@ -100,5 +100,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.58"
+#define CIFS_VERSION   "1.59"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index fae083930ee..f9452329bcc 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -90,10 +90,10 @@ extern struct oplock_q_entry *AllocOplockQEntry(struct inode *, u16,
 						 struct cifsTconInfo *);
 extern void DeleteOplockQEntry(struct oplock_q_entry *);
 extern void DeleteTconOplockQEntries(struct cifsTconInfo *);
-extern struct timespec cifs_NTtimeToUnix(u64 utc_nanoseconds_since_1601);
+extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
 extern u64 cifs_UnixTimeToNT(struct timespec);
-extern __le64 cnvrtDosCifsTm(__u16 date, __u16 time);
-extern struct timespec cnvrtDosUnixTm(__u16 date, __u16 time);
+extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
+				      int offset);
 
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
 			   struct super_block *sb, int mode, int oflags,
@@ -108,8 +108,8 @@ extern int cifs_get_inode_info(struct inode **pinode,
 extern int cifs_get_inode_info_unix(struct inode **pinode,
 			const unsigned char *search_path,
 			struct super_block *sb, int xid);
-extern void acl_to_uid_mode(struct inode *inode, const char *path,
-			    const __u16 *pfid);
+extern void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
+			    const char *path, const __u16 *pfid);
 extern int mode_to_acl(struct inode *inode, const char *path, __u64);
 
 extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 75e6623a863..b84c61d5bca 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -524,8 +524,8 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 			int val, seconds, remain, result;
 			struct timespec ts, utc;
 			utc = CURRENT_TIME;
-			ts = cnvrtDosUnixTm(le16_to_cpu(rsp->SrvTime.Date),
-						le16_to_cpu(rsp->SrvTime.Time));
+			ts = cnvrtDosUnixTm(rsp->SrvTime.Date,
+					    rsp->SrvTime.Time, 0);
 			cFYI(1, ("SrvTime %d sec since 1970 (utc: %d) diff: %d",
 				(int)ts.tv_sec, (int)utc.tv_sec,
 				(int)(utc.tv_sec - ts.tv_sec)));
@@ -2427,8 +2427,7 @@ querySymLinkRetry:
 	params = 2 /* level */  + 4 /* rsrvd */  + name_len /* incl null */ ;
 	pSMB->TotalDataCount = 0;
 	pSMB->MaxParameterCount = cpu_to_le16(2);
-	/* BB find exact max data count below from sess structure BB */
-	pSMB->MaxDataCount = cpu_to_le16(4000);
+	pSMB->MaxDataCount = cpu_to_le16(CIFSMaxBufSize);
 	pSMB->MaxSetupCount = 0;
 	pSMB->Reserved = 0;
 	pSMB->Flags = 0;
@@ -2475,7 +2474,7 @@ querySymLinkRetry:
 			/* BB FIXME investigate remapping reserved chars here */
 			*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
 						    is_unicode, nls_codepage);
-			if (!symlinkinfo)
+			if (!*symlinkinfo)
 				rc = -ENOMEM;
 		}
 	}
@@ -3976,9 +3975,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		max_len = data_end - temp;
 		node->path_name = cifs_strndup_from_ucs(temp, max_len,
 						      is_unicode, nls_codepage);
-		if (IS_ERR(node->path_name)) {
-			rc = PTR_ERR(node->path_name);
-			node->path_name = NULL;
+		if (!node->path_name) {
+			rc = -ENOMEM;
 			goto parse_DFS_referrals_exit;
 		}
 
@@ -3987,11 +3985,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		max_len = data_end - temp;
 		node->node_name = cifs_strndup_from_ucs(temp, max_len,
 						      is_unicode, nls_codepage);
-		if (IS_ERR(node->node_name)) {
-			rc = PTR_ERR(node->node_name);
-			node->node_name = NULL;
-			goto parse_DFS_referrals_exit;
-		}
+		if (!node->node_name)
+			rc = -ENOMEM;
 	}
 
 parse_DFS_referrals_exit:
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4aa81a507b7..97f4311b9a8 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -35,6 +35,7 @@
 #include <linux/namei.h>
 #include <asm/uaccess.h>
 #include <asm/processor.h>
+#include <linux/inet.h>
 #include <net/ipv6.h>
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -61,7 +62,6 @@ struct smb_vol {
 	char *domainname;
 	char *UNC;
 	char *UNCip;
-	char *in6_addr;   /* ipv6 address as human readable form of in6_addr */
 	char *iocharset;  /* local code page for mapping to and from Unicode */
 	char source_rfc1001_name[16]; /* netbios name of client */
 	char target_rfc1001_name[16]; /* netbios name of server for Win9x/ME */
@@ -827,14 +827,16 @@ cifs_parse_mount_options(char *options, const char *devname,
 	vol->target_rfc1001_name[0] = 0;
 	vol->linux_uid = current_uid();  /* use current_euid() instead? */
 	vol->linux_gid = current_gid();
-	vol->dir_mode = S_IRWXUGO;
-	/* 2767 perms indicate mandatory locking support */
-	vol->file_mode = (S_IRWXUGO | S_ISGID) & (~S_IXGRP);
+
+	/* default to only allowing write access to owner of the mount */
+	vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR;
 
 	/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
 	vol->rw = true;
 	/* default is always to request posix paths. */
 	vol->posix_paths = 1;
+	/* default to using server inode numbers where available */
+	vol->server_ino = 1;
 
 	if (!options)
 		return 1;
@@ -955,10 +957,12 @@ cifs_parse_mount_options(char *options, const char *devname,
 				}
 				strcpy(vol->password, value);
 			}
-		} else if (strnicmp(data, "ip", 2) == 0) {
+		} else if (!strnicmp(data, "ip", 2) ||
+			   !strnicmp(data, "addr", 4)) {
 			if (!value || !*value) {
 				vol->UNCip = NULL;
-			} else if (strnlen(value, 35) < 35) {
+			} else if (strnlen(value, INET6_ADDRSTRLEN) <
+							INET6_ADDRSTRLEN) {
 				vol->UNCip = value;
 			} else {
 				printk(KERN_WARNING "CIFS: ip address "
@@ -1092,17 +1096,17 @@ cifs_parse_mount_options(char *options, const char *devname,
 				return 1;
 			}
 		} else if (strnicmp(data, "uid", 3) == 0) {
-			if (value && *value) {
+			if (value && *value)
 				vol->linux_uid =
 					simple_strtoul(value, &value, 0);
+		} else if (strnicmp(data, "forceuid", 8) == 0) {
 				vol->override_uid = 1;
-			}
 		} else if (strnicmp(data, "gid", 3) == 0) {
-			if (value && *value) {
+			if (value && *value)
 				vol->linux_gid =
 					simple_strtoul(value, &value, 0);
+		} else if (strnicmp(data, "forcegid", 8) == 0) {
 				vol->override_gid = 1;
-			}
 		} else if (strnicmp(data, "file_mode", 4) == 0) {
 			if (value && *value) {
 				vol->file_mode =
@@ -1315,16 +1319,6 @@ cifs_parse_mount_options(char *options, const char *devname,
 			vol->direct_io = 1;
 		} else if (strnicmp(data, "forcedirectio", 13) == 0) {
 			vol->direct_io = 1;
-		} else if (strnicmp(data, "in6_addr", 8) == 0) {
-			if (!value || !*value) {
-				vol->in6_addr = NULL;
-			} else if (strnlen(value, 49) == 48) {
-				vol->in6_addr = value;
-			} else {
-				printk(KERN_WARNING "CIFS: ip v6 address not "
-						    "48 characters long\n");
-				return 1;
-			}
 		} else if (strnicmp(data, "noac", 4) == 0) {
 			printk(KERN_WARNING "CIFS: Mount option noac not "
 				"supported. Instead set "
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 11431ed72a7..3758965d73d 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -225,6 +225,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 	if (!(oflags & FMODE_READ))
 		write_only = true;
 
+	mode &= ~current_umask();
 	rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
 			pnetfid, presp_data, &oplock, full_path,
 			cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
@@ -310,7 +311,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		return -ENOMEM;
 	}
 
-	mode &= ~current_umask();
 	if (oplockEnabled)
 		oplock = REQ_OPLOCK;
 
@@ -336,7 +336,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 			else /* success, no need to query */
 				goto cifs_create_set_dentry;
 		} else if ((rc != -EIO) && (rc != -EREMOTE) &&
-			 (rc != -EOPNOTSUPP)) /* path not found or net err */
+			 (rc != -EOPNOTSUPP) && (rc != -EINVAL))
 			goto cifs_create_out;
 		/* else fallthrough to retry, using older open call, this is
 		   case where server does not support this SMB level, and
@@ -609,7 +609,6 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	int xid;
 	int rc = 0; /* to get around spurious gcc warning, set to zero here */
 	int oplock = 0;
-	int mode;
 	__u16 fileHandle = 0;
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
@@ -658,30 +657,36 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	}
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
 
+	/* Posix open is only called (at lookup time) for file create now.
+	 * For opens (rather than creates), because we do not know if it
+	 * is a file or directory yet, and current Samba no longer allows
+	 * us to do posix open on dirs, we could end up wasting an open call
+	 * on what turns out to be a dir. For file opens, we wait to call posix
+	 * open till cifs_open.  It could be added here (lookup) in the future
+	 * but the performance tradeoff of the extra network request when EISDIR
+	 * or EACCES is returned would have to be weighed against the 50%
+	 * reduction in network traffic in the other paths.
+	 */
 	if (pTcon->unix_ext) {
 		if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
-				(nd->flags & LOOKUP_OPEN)) {
-			if (!((nd->intent.open.flags & O_CREAT) &&
-					(nd->intent.open.flags & O_EXCL))) {
-				mode = nd->intent.open.create_mode &
-						~current_umask();
-				rc = cifs_posix_open(full_path, &newInode,
-					parent_dir_inode->i_sb, mode,
+		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
+		     (nd->intent.open.flags & O_CREAT)) {
+			rc = cifs_posix_open(full_path, &newInode,
+					parent_dir_inode->i_sb,
+					nd->intent.open.create_mode,
 					nd->intent.open.flags, &oplock,
 					&fileHandle, xid);
-				/*
-				 * This code works around a bug in
-				 * samba posix open in samba versions 3.3.1
-				 * and earlier where create works
-				 * but open fails with invalid parameter.
-				 * If either of these error codes are
-				 * returned, follow the normal lookup.
-				 * Otherwise, the error during posix open
-				 * is handled.
-				 */
-				if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
-					posix_open = true;
-			}
+			/*
+			 * The check below works around a bug in POSIX
+			 * open in samba versions 3.3.1 and earlier where
+			 * open could incorrectly fail with invalid parameter.
+			 * If either that or op not supported returned, follow
+			 * the normal lookup.
+			 */
+			if ((rc == 0) || (rc == -ENOENT))
+				posix_open = true;
+			else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP))
+				pTcon->broken_posix_open = true;
 		}
 		if (!posix_open)
 			rc = cifs_get_inode_info_unix(&newInode, full_path,
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 38c06f82657..06866841b97 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -130,10 +130,6 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
 			struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
 {
 
-	file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-	if (file->private_data == NULL)
-		return -ENOMEM;
-	pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
 	write_lock(&GlobalSMBSeslock);
 
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
@@ -184,6 +180,38 @@ psx_client_can_cache:
 	return 0;
 }
 
+static struct cifsFileInfo *
+cifs_fill_filedata(struct file *file)
+{
+	struct list_head *tmp;
+	struct cifsFileInfo *pCifsFile = NULL;
+	struct cifsInodeInfo *pCifsInode = NULL;
+
+	/* search inode for this file and fill in file->private_data */
+	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+	read_lock(&GlobalSMBSeslock);
+	list_for_each(tmp, &pCifsInode->openFileList) {
+		pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
+		if ((pCifsFile->pfile == NULL) &&
+		    (pCifsFile->pid == current->tgid)) {
+			/* mode set in cifs_create */
+
+			/* needed for writepage */
+			pCifsFile->pfile = file;
+			file->private_data = pCifsFile;
+			break;
+		}
+	}
+	read_unlock(&GlobalSMBSeslock);
+
+	if (file->private_data != NULL) {
+		return pCifsFile;
+	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+			cERROR(1, ("could not find file instance for "
+				   "new file %p", file));
+	return NULL;
+}
+
 /* all arguments to this function must be checked for validity in caller */
 static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
 	struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
@@ -213,7 +241,7 @@ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
 	/* BB need same check in cifs_create too? */
 	/* if not oplocked, invalidate inode pages if mtime or file
 	   size changed */
-	temp = cifs_NTtimeToUnix(le64_to_cpu(buf->LastWriteTime));
+	temp = cifs_NTtimeToUnix(buf->LastWriteTime);
 	if (timespec_equal(&file->f_path.dentry->d_inode->i_mtime, &temp) &&
 			   (file->f_path.dentry->d_inode->i_size ==
 			    (loff_t)le64_to_cpu(buf->EndOfFile))) {
@@ -258,7 +286,6 @@ int cifs_open(struct inode *inode, struct file *file)
 	struct cifsTconInfo *tcon;
 	struct cifsFileInfo *pCifsFile;
 	struct cifsInodeInfo *pCifsInode;
-	struct list_head *tmp;
 	char *full_path = NULL;
 	int desiredAccess;
 	int disposition;
@@ -270,32 +297,12 @@ int cifs_open(struct inode *inode, struct file *file)
 	cifs_sb = CIFS_SB(inode->i_sb);
 	tcon = cifs_sb->tcon;
 
-	/* search inode for this file and fill in file->private_data */
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	read_lock(&GlobalSMBSeslock);
-	list_for_each(tmp, &pCifsInode->openFileList) {
-		pCifsFile = list_entry(tmp, struct cifsFileInfo,
-				       flist);
-		if ((pCifsFile->pfile == NULL) &&
-		    (pCifsFile->pid == current->tgid)) {
-			/* mode set in cifs_create */
-
-			/* needed for writepage */
-			pCifsFile->pfile = file;
-
-			file->private_data = pCifsFile;
-			break;
-		}
-	}
-	read_unlock(&GlobalSMBSeslock);
-
-	if (file->private_data != NULL) {
-		rc = 0;
+	pCifsFile = cifs_fill_filedata(file);
+	if (pCifsFile) {
 		FreeXid(xid);
-		return rc;
-	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
-			cERROR(1, ("could not find file instance for "
-				   "new file %p", file));
+		return 0;
+	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -325,6 +332,7 @@ int cifs_open(struct inode *inode, struct file *file)
 			/* no need for special case handling of setting mode
 			   on read only files needed here */
 
+			pCifsFile = cifs_fill_filedata(file);
 			cifs_posix_open_inode_helper(inode, file, pCifsInode,
 						     pCifsFile, oplock, netfid);
 			goto out;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 9c869a6dcba..fad882b075b 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -85,10 +85,10 @@ static void cifs_unix_info_to_inode(struct inode *inode,
 	__u64 num_of_bytes = le64_to_cpu(info->NumOfBytes);
 	__u64 end_of_file = le64_to_cpu(info->EndOfFile);
 
-	inode->i_atime = cifs_NTtimeToUnix(le64_to_cpu(info->LastAccessTime));
+	inode->i_atime = cifs_NTtimeToUnix(info->LastAccessTime);
 	inode->i_mtime =
-		cifs_NTtimeToUnix(le64_to_cpu(info->LastModificationTime));
-	inode->i_ctime = cifs_NTtimeToUnix(le64_to_cpu(info->LastStatusChange));
+		cifs_NTtimeToUnix(info->LastModificationTime);
+	inode->i_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
 	inode->i_mode = le64_to_cpu(info->Permissions);
 
 	/*
@@ -554,14 +554,11 @@ int cifs_get_inode_info(struct inode **pinode,
 
 	/* Linux can not store file creation time so ignore it */
 	if (pfindData->LastAccessTime)
-		inode->i_atime = cifs_NTtimeToUnix
-			(le64_to_cpu(pfindData->LastAccessTime));
+		inode->i_atime = cifs_NTtimeToUnix(pfindData->LastAccessTime);
 	else /* do not need to use current_fs_time - time not stored */
 		inode->i_atime = CURRENT_TIME;
-	inode->i_mtime =
-		    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
-	inode->i_ctime =
-	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
+	inode->i_mtime = cifs_NTtimeToUnix(pfindData->LastWriteTime);
+	inode->i_ctime = cifs_NTtimeToUnix(pfindData->ChangeTime);
 	cFYI(DBG2, ("Attributes came in as 0x%x", attr));
 	if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
 		inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
@@ -629,7 +626,7 @@ int cifs_get_inode_info(struct inode **pinode,
 	/* fill in 0777 bits from ACL */
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
 		cFYI(1, ("Getting mode bits from ACL"));
-		acl_to_uid_mode(inode, full_path, pfid);
+		acl_to_uid_mode(cifs_sb, inode, full_path, pfid);
 	}
 #endif
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
@@ -699,7 +696,7 @@ char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
 }
 
 /* gets root inode */
-struct inode *cifs_iget(struct super_block *sb, unsigned long ino)
+struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 {
 	int xid;
 	struct cifs_sb_info *cifs_sb;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index ea9d11e3dcb..cd83c53fcbb 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -107,48 +107,48 @@ void *
 cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 {
 	struct inode *inode = direntry->d_inode;
-	int rc = -EACCES;
+	int rc = -ENOMEM;
 	int xid;
 	char *full_path = NULL;
-	char *target_path = ERR_PTR(-ENOMEM);
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
+	char *target_path = NULL;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *tcon = cifs_sb->tcon;
 
 	xid = GetXid();
 
-	full_path = build_path_from_dentry(direntry);
+	/*
+	 * For now, we just handle symlinks with unix extensions enabled.
+	 * Eventually we should handle NTFS reparse points, and MacOS
+	 * symlink support. For instance...
+	 *
+	 * rc = CIFSSMBQueryReparseLinkInfo(...)
+	 *
+	 * For now, just return -EACCES when the server doesn't support posix
+	 * extensions. Note that we still allow querying symlinks when posix
+	 * extensions are manually disabled. We could disable these as well
+	 * but there doesn't seem to be any harm in allowing the client to
+	 * read them.
+	 */
+	if (!(tcon->ses->capabilities & CAP_UNIX)) {
+		rc = -EACCES;
+		goto out;
+	}
 
+	full_path = build_path_from_dentry(direntry);
 	if (!full_path)
 		goto out;
 
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
-	cifs_sb = CIFS_SB(inode->i_sb);
-	pTcon = cifs_sb->tcon;
-
-	/* We could change this to:
-		if (pTcon->unix_ext)
-	   but there does not seem any point in refusing to
-	   get symlink info if we can, even if unix extensions
-	   turned off for this mount */
-
-	if (pTcon->ses->capabilities & CAP_UNIX)
-		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-					     &target_path,
-					     cifs_sb->local_nls);
-	else {
-		/* BB add read reparse point symlink code here */
-		/* rc = CIFSSMBQueryReparseLinkInfo */
-		/* BB Add code to Query ReparsePoint info */
-		/* BB Add MAC style xsymlink check here if enabled */
-	}
 
+	rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path,
+				     cifs_sb->local_nls);
+	kfree(full_path);
+out:
 	if (rc != 0) {
 		kfree(target_path);
 		target_path = ERR_PTR(rc);
 	}
 
-	kfree(full_path);
-out:
 	FreeXid(xid);
 	nd_set_link(nd, target_path);
 	return NULL;
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index e2fe998989a..32d6baa0a54 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -853,12 +853,12 @@ smbCalcSize_LE(struct smb_hdr *ptr)
 
 #define NTFS_TIME_OFFSET ((u64)(369*365 + 89) * 24 * 3600 * 10000000)
 
-    /*
-     * Convert the NT UTC (based 1601-01-01, in hundred nanosecond units)
-     * into Unix UTC (based 1970-01-01, in seconds).
-     */
+/*
+ * Convert the NT UTC (based 1601-01-01, in hundred nanosecond units)
+ * into Unix UTC (based 1970-01-01, in seconds).
+ */
 struct timespec
-cifs_NTtimeToUnix(u64 ntutc)
+cifs_NTtimeToUnix(__le64 ntutc)
 {
 	struct timespec ts;
 	/* BB what about the timezone? BB */
@@ -866,7 +866,7 @@ cifs_NTtimeToUnix(u64 ntutc)
 	/* Subtract the NTFS time offset, then convert to 1s intervals. */
 	u64 t;
 
-	t = ntutc - NTFS_TIME_OFFSET;
+	t = le64_to_cpu(ntutc) - NTFS_TIME_OFFSET;
 	ts.tv_nsec = do_div(t, 10000000) * 100;
 	ts.tv_sec = t;
 	return ts;
@@ -883,16 +883,12 @@ cifs_UnixTimeToNT(struct timespec t)
 static int total_days_of_prev_months[] =
 {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
 
-
-__le64 cnvrtDosCifsTm(__u16 date, __u16 time)
-{
-	return cpu_to_le64(cifs_UnixTimeToNT(cnvrtDosUnixTm(date, time)));
-}
-
-struct timespec cnvrtDosUnixTm(__u16 date, __u16 time)
+struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time, int offset)
 {
 	struct timespec ts;
 	int sec, min, days, month, year;
+	u16 date = le16_to_cpu(le_date);
+	u16 time = le16_to_cpu(le_time);
 	SMB_TIME *st = (SMB_TIME *)&time;
 	SMB_DATE *sd = (SMB_DATE *)&date;
 
@@ -933,7 +929,7 @@ struct timespec cnvrtDosUnixTm(__u16 date, __u16 time)
 		days -= ((year & 0x03) == 0) && (month < 2 ? 1 : 0);
 	sec += 24 * 60 * 60 * days;
 
-	ts.tv_sec = sec;
+	ts.tv_sec = sec + offset;
 
 	/* cFYI(1,("sec after cnvrt dos to unix time %d",sec)); */
 
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 964e097c820..86d0055dc52 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -115,17 +115,6 @@ construct_dentry(struct qstr *qstring, struct file *file,
 	return rc;
 }
 
-static void AdjustForTZ(struct cifsTconInfo *tcon, struct inode *inode)
-{
-	if ((tcon) && (tcon->ses) && (tcon->ses->server)) {
-		inode->i_ctime.tv_sec += tcon->ses->server->timeAdj;
-		inode->i_mtime.tv_sec += tcon->ses->server->timeAdj;
-		inode->i_atime.tv_sec += tcon->ses->server->timeAdj;
-	}
-	return;
-}
-
-
 static void fill_in_inode(struct inode *tmp_inode, int new_buf_type,
 			  char *buf, unsigned int *pobject_type, int isNewInode)
 {
@@ -150,26 +139,25 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type,
 		allocation_size = le64_to_cpu(pfindData->AllocationSize);
 		end_of_file = le64_to_cpu(pfindData->EndOfFile);
 		tmp_inode->i_atime =
-		      cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastAccessTime));
+			cifs_NTtimeToUnix(pfindData->LastAccessTime);
 		tmp_inode->i_mtime =
-		      cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
+			cifs_NTtimeToUnix(pfindData->LastWriteTime);
 		tmp_inode->i_ctime =
-		      cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
+			cifs_NTtimeToUnix(pfindData->ChangeTime);
 	} else { /* legacy, OS2 and DOS style */
-/*		struct timespec ts;*/
+		int offset = cifs_sb->tcon->ses->server->timeAdj;
 		FIND_FILE_STANDARD_INFO *pfindData =
 			(FIND_FILE_STANDARD_INFO *)buf;
 
-		tmp_inode->i_mtime = cnvrtDosUnixTm(
-				le16_to_cpu(pfindData->LastWriteDate),
-				le16_to_cpu(pfindData->LastWriteTime));
-		tmp_inode->i_atime = cnvrtDosUnixTm(
-				le16_to_cpu(pfindData->LastAccessDate),
-				le16_to_cpu(pfindData->LastAccessTime));
-		tmp_inode->i_ctime = cnvrtDosUnixTm(
-				le16_to_cpu(pfindData->LastWriteDate),
-				le16_to_cpu(pfindData->LastWriteTime));
-		AdjustForTZ(cifs_sb->tcon, tmp_inode);
+		tmp_inode->i_mtime = cnvrtDosUnixTm(pfindData->LastWriteDate,
+						    pfindData->LastWriteTime,
+						    offset);
+		tmp_inode->i_atime = cnvrtDosUnixTm(pfindData->LastAccessDate,
+						    pfindData->LastAccessTime,
+						    offset);
+		tmp_inode->i_ctime = cnvrtDosUnixTm(pfindData->LastWriteDate,
+						    pfindData->LastWriteTime,
+						    offset);
 		attr = le16_to_cpu(pfindData->Attributes);
 		allocation_size = le32_to_cpu(pfindData->AllocationSize);
 		end_of_file = le32_to_cpu(pfindData->DataSize);
@@ -331,11 +319,11 @@ static void unix_fill_in_inode(struct inode *tmp_inode,
 	local_size  = tmp_inode->i_size;
 
 	tmp_inode->i_atime =
-	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastAccessTime));
+	    cifs_NTtimeToUnix(pfindData->LastAccessTime);
 	tmp_inode->i_mtime =
-	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastModificationTime));
+	    cifs_NTtimeToUnix(pfindData->LastModificationTime);
 	tmp_inode->i_ctime =
-	    cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastStatusChange));
+	    cifs_NTtimeToUnix(pfindData->LastStatusChange);
 
 	tmp_inode->i_mode = le64_to_cpu(pfindData->Permissions);
 	/* since we set the inode type below we need to mask off type
diff --git a/fs/coda/file.c b/fs/coda/file.c
index 6a347fbc998..ffd42815fda 100644
--- a/fs/coda/file.c
+++ b/fs/coda/file.c
@@ -47,6 +47,8 @@ coda_file_splice_read(struct file *coda_file, loff_t *ppos,
 		      struct pipe_inode_info *pipe, size_t count,
 		      unsigned int flags)
 {
+	ssize_t (*splice_read)(struct file *, loff_t *,
+			       struct pipe_inode_info *, size_t, unsigned int);
 	struct coda_file_info *cfi;
 	struct file *host_file;
 
@@ -54,10 +56,11 @@ coda_file_splice_read(struct file *coda_file, loff_t *ppos,
 	BUG_ON(!cfi || cfi->cfi_magic != CODA_MAGIC);
 	host_file = cfi->cfi_container;
 
-	if (!host_file->f_op || !host_file->f_op->splice_read)
-		return -EINVAL;
+	splice_read = host_file->f_op->splice_read;
+	if (!splice_read)
+		splice_read = default_file_splice_read;
 
-	return host_file->f_op->splice_read(host_file, ppos, pipe, count,flags);
+	return splice_read(host_file, ppos, pipe, count, flags);
 }
 
 static ssize_t
diff --git a/fs/compat.c b/fs/compat.c
index 681ed81e6be..cdd51a3a7c5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -471,7 +471,7 @@ asmlinkage long compat_sys_fcntl64(unsigned int fd, unsigned int cmd,
 		ret = sys_fcntl(fd, cmd, (unsigned long)&f);
 		set_fs(old_fs);
 		if (cmd == F_GETLK && ret == 0) {
-			/* GETLK was successfule and we need to return the data...
+			/* GETLK was successful and we need to return the data...
 			 * but it needs to fit in the compat structure.
 			 * l_start shouldn't be too big, unless the original
 			 * start + end is greater than COMPAT_OFF_T_MAX, in which
@@ -812,10 +812,8 @@ asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name,
 		}
 	}
 
-	lock_kernel();
 	retval = do_mount((char*)dev_page, dir_page, (char*)type_page,
 			flags, (void*)data_page);
-	unlock_kernel();
 
  out4:
 	free_page(data_page);
@@ -1488,7 +1486,7 @@ int compat_do_execve(char * filename,
 	if (!bprm)
 		goto out_files;
 
-	retval = mutex_lock_interruptible(&current->cred_exec_mutex);
+	retval = mutex_lock_interruptible(&current->cred_guard_mutex);
 	if (retval < 0)
 		goto out_free;
 	current->in_execve = 1;
@@ -1550,7 +1548,7 @@ int compat_do_execve(char * filename,
 	/* execve succeeded */
 	current->fs->in_exec = 0;
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_exec_mutex);
+	mutex_unlock(&current->cred_guard_mutex);
 	acct_update_integrals(current);
 	free_bprm(bprm);
 	if (displaced)
@@ -1573,7 +1571,7 @@ out_unmark:
 
 out_unlock:
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_exec_mutex);
+	mutex_unlock(&current->cred_guard_mutex);
 
 out_free:
 	free_bprm(bprm);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index b83f6bcfa51..0aac371bff0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1765,7 +1765,7 @@ static int do_i2c_smbus_ioctl(unsigned int fd, unsigned int cmd, unsigned long a
 
 /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
  * for some operations; this forces use of the newer bridge-utils that
- * use compatiable ioctls
+ * use compatible ioctls
  */
 static int old_bridge_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
 {
diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h
index 762d287123c..da6061a6df4 100644
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -39,6 +39,9 @@ struct configfs_dirent {
 	umode_t			s_mode;
 	struct dentry		* s_dentry;
 	struct iattr		* s_iattr;
+#ifdef CONFIG_LOCKDEP
+	int			s_depth;
+#endif
 };
 
 #define CONFIGFS_ROOT		0x0001
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 05373db21a4..8e48b52205a 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -78,11 +78,97 @@ static const struct dentry_operations configfs_dentry_ops = {
 	.d_delete	= configfs_d_delete,
 };
 
+#ifdef CONFIG_LOCKDEP
+
+/*
+ * Helpers to make lockdep happy with our recursive locking of default groups'
+ * inodes (see configfs_attach_group() and configfs_detach_group()).
+ * We put default groups i_mutexes in separate classes according to their depth
+ * from the youngest non-default group ancestor.
+ *
+ * For a non-default group A having default groups A/B, A/C, and A/C/D, default
+ * groups A/B and A/C will have their inode's mutex in class
+ * default_group_class[0], and default group A/C/D will be in
+ * default_group_class[1].
+ *
+ * The lock classes are declared and assigned in inode.c, according to the
+ * s_depth value.
+ * The s_depth value is initialized to -1, adjusted to >= 0 when attaching
+ * default groups, and reset to -1 when all default groups are attached. During
+ * attachment, if configfs_create() sees s_depth > 0, the lock class of the new
+ * inode's mutex is set to default_group_class[s_depth - 1].
+ */
+
+static void configfs_init_dirent_depth(struct configfs_dirent *sd)
+{
+	sd->s_depth = -1;
+}
+
+static void configfs_set_dir_dirent_depth(struct configfs_dirent *parent_sd,
+					  struct configfs_dirent *sd)
+{
+	int parent_depth = parent_sd->s_depth;
+
+	if (parent_depth >= 0)
+		sd->s_depth = parent_depth + 1;
+}
+
+static void
+configfs_adjust_dir_dirent_depth_before_populate(struct configfs_dirent *sd)
+{
+	/*
+	 * item's i_mutex class is already setup, so s_depth is now only
+	 * used to set new sub-directories s_depth, which is always done
+	 * with item's i_mutex locked.
+	 */
+	/*
+	 *  sd->s_depth == -1 iff we are a non default group.
+	 *  else (we are a default group) sd->s_depth > 0 (see
+	 *  create_dir()).
+	 */
+	if (sd->s_depth == -1)
+		/*
+		 * We are a non default group and we are going to create
+		 * default groups.
+		 */
+		sd->s_depth = 0;
+}
+
+static void
+configfs_adjust_dir_dirent_depth_after_populate(struct configfs_dirent *sd)
+{
+	/* We will not create default groups anymore. */
+	sd->s_depth = -1;
+}
+
+#else /* CONFIG_LOCKDEP */
+
+static void configfs_init_dirent_depth(struct configfs_dirent *sd)
+{
+}
+
+static void configfs_set_dir_dirent_depth(struct configfs_dirent *parent_sd,
+					  struct configfs_dirent *sd)
+{
+}
+
+static void
+configfs_adjust_dir_dirent_depth_before_populate(struct configfs_dirent *sd)
+{
+}
+
+static void
+configfs_adjust_dir_dirent_depth_after_populate(struct configfs_dirent *sd)
+{
+}
+
+#endif /* CONFIG_LOCKDEP */
+
 /*
  * Allocates a new configfs_dirent and links it to the parent configfs_dirent
  */
-static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * parent_sd,
-						void * element)
+static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent *parent_sd,
+						   void *element, int type)
 {
 	struct configfs_dirent * sd;
 
@@ -94,6 +180,8 @@ static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * pare
 	INIT_LIST_HEAD(&sd->s_links);
 	INIT_LIST_HEAD(&sd->s_children);
 	sd->s_element = element;
+	sd->s_type = type;
+	configfs_init_dirent_depth(sd);
 	spin_lock(&configfs_dirent_lock);
 	if (parent_sd->s_type & CONFIGFS_USET_DROPPING) {
 		spin_unlock(&configfs_dirent_lock);
@@ -138,12 +226,11 @@ int configfs_make_dirent(struct configfs_dirent * parent_sd,
 {
 	struct configfs_dirent * sd;
 
-	sd = configfs_new_dirent(parent_sd, element);
+	sd = configfs_new_dirent(parent_sd, element, type);
 	if (IS_ERR(sd))
 		return PTR_ERR(sd);
 
 	sd->s_mode = mode;
-	sd->s_type = type;
 	sd->s_dentry = dentry;
 	if (dentry) {
 		dentry->d_fsdata = configfs_get(sd);
@@ -187,6 +274,7 @@ static int create_dir(struct config_item * k, struct dentry * p,
 		error = configfs_make_dirent(p->d_fsdata, d, k, mode,
 					     CONFIGFS_DIR | CONFIGFS_USET_CREATING);
 	if (!error) {
+		configfs_set_dir_dirent_depth(p->d_fsdata, d->d_fsdata);
 		error = configfs_create(d, mode, init_dir);
 		if (!error) {
 			inc_nlink(p->d_inode);
@@ -789,11 +877,13 @@ static int configfs_attach_group(struct config_item *parent_item,
 		 * error, as rmdir() would.
 		 */
 		mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+		configfs_adjust_dir_dirent_depth_before_populate(sd);
 		ret = populate_groups(to_config_group(item));
 		if (ret) {
 			configfs_detach_item(item);
 			dentry->d_inode->i_flags |= S_DEAD;
 		}
+		configfs_adjust_dir_dirent_depth_after_populate(sd);
 		mutex_unlock(&dentry->d_inode->i_mutex);
 		if (ret)
 			d_delete(dentry);
@@ -916,11 +1006,11 @@ static int configfs_dump(struct configfs_dirent *sd, int level)
  * Note, btw, that this can be called at *any* time, even when a configfs
  * subsystem isn't registered, or when configfs is loading or unloading.
  * Just like configfs_register_subsystem().  So we take the same
- * precautions.  We pin the filesystem.  We lock each i_mutex _in_order_
- * on our way down the tree.  If we can find the target item in the
+ * precautions.  We pin the filesystem.  We lock configfs_dirent_lock.
+ * If we can find the target item in the
  * configfs tree, it must be part of the subsystem tree as well, so we
- * do not need the subsystem semaphore.  Holding the i_mutex chain locks
- * out mkdir() and rmdir(), who might be racing us.
+ * do not need the subsystem semaphore.  Holding configfs_dirent_lock helps
+ * locking out mkdir() and rmdir(), who might be racing us.
  */
 
 /*
@@ -933,17 +1023,21 @@ static int configfs_dump(struct configfs_dirent *sd, int level)
  * do that so we can unlock it if we find nothing.
  *
  * Here we do a depth-first search of the dentry hierarchy looking for
- * our object.  We take i_mutex on each step of the way down.  IT IS
- * ESSENTIAL THAT i_mutex LOCKING IS ORDERED.  If we come back up a branch,
- * we'll drop the i_mutex.
+ * our object.
+ * We deliberately ignore items tagged as dropping since they are virtually
+ * dead, as well as items in the middle of attachment since they virtually
+ * do not exist yet. This completes the locking out of racing mkdir() and
+ * rmdir().
+ * Note: subdirectories in the middle of attachment start with s_type =
+ * CONFIGFS_DIR|CONFIGFS_USET_CREATING set by create_dir().  When
+ * CONFIGFS_USET_CREATING is set, we ignore the item.  The actual set of
+ * s_type is in configfs_new_dirent(), which has configfs_dirent_lock.
  *
- * If the target is not found, -ENOENT is bubbled up and we have released
- * all locks.  If the target was found, the locks will be cleared by
- * configfs_depend_rollback().
+ * If the target is not found, -ENOENT is bubbled up.
  *
  * This adds a requirement that all config_items be unique!
  *
- * This is recursive because the locking traversal is tricky.  There isn't
+ * This is recursive.  There isn't
  * much on the stack, though, so folks that need this function - be careful
  * about your stack!  Patches will be accepted to make it iterative.
  */
@@ -955,13 +1049,13 @@ static int configfs_depend_prep(struct dentry *origin,
 
 	BUG_ON(!origin || !sd);
 
-	/* Lock this guy on the way down */
-	mutex_lock(&sd->s_dentry->d_inode->i_mutex);
 	if (sd->s_element == target)  /* Boo-yah */
 		goto out;
 
 	list_for_each_entry(child_sd, &sd->s_children, s_sibling) {
-		if (child_sd->s_type & CONFIGFS_DIR) {
+		if ((child_sd->s_type & CONFIGFS_DIR) &&
+		    !(child_sd->s_type & CONFIGFS_USET_DROPPING) &&
+		    !(child_sd->s_type & CONFIGFS_USET_CREATING)) {
 			ret = configfs_depend_prep(child_sd->s_dentry,
 						   target);
 			if (!ret)
@@ -970,33 +1064,12 @@ static int configfs_depend_prep(struct dentry *origin,
 	}
 
 	/* We looped all our children and didn't find target */
-	mutex_unlock(&sd->s_dentry->d_inode->i_mutex);
 	ret = -ENOENT;
 
 out:
 	return ret;
 }
 
-/*
- * This is ONLY called if configfs_depend_prep() did its job.  So we can
- * trust the entire path from item back up to origin.
- *
- * We walk backwards from item, unlocking each i_mutex.  We finish by
- * unlocking origin.
- */
-static void configfs_depend_rollback(struct dentry *origin,
-				     struct config_item *item)
-{
-	struct dentry *dentry = item->ci_dentry;
-
-	while (dentry != origin) {
-		mutex_unlock(&dentry->d_inode->i_mutex);
-		dentry = dentry->d_parent;
-	}
-
-	mutex_unlock(&origin->d_inode->i_mutex);
-}
-
 int configfs_depend_item(struct configfs_subsystem *subsys,
 			 struct config_item *target)
 {
@@ -1037,17 +1110,21 @@ int configfs_depend_item(struct configfs_subsystem *subsys,
 
 	/* Ok, now we can trust subsys/s_item */
 
-	/* Scan the tree, locking i_mutex recursively, return 0 if found */
+	spin_lock(&configfs_dirent_lock);
+	/* Scan the tree, return 0 if found */
 	ret = configfs_depend_prep(subsys_sd->s_dentry, target);
 	if (ret)
-		goto out_unlock_fs;
+		goto out_unlock_dirent_lock;
 
-	/* We hold all i_mutexes from the subsystem down to the target */
+	/*
+	 * We are sure that the item is not about to be removed by rmdir(), and
+	 * not in the middle of attachment by mkdir().
+	 */
 	p = target->ci_dentry->d_fsdata;
 	p->s_dependent_count += 1;
 
-	configfs_depend_rollback(subsys_sd->s_dentry, target);
-
+out_unlock_dirent_lock:
+	spin_unlock(&configfs_dirent_lock);
 out_unlock_fs:
 	mutex_unlock(&configfs_sb->s_root->d_inode->i_mutex);
 
@@ -1072,10 +1149,10 @@ void configfs_undepend_item(struct configfs_subsystem *subsys,
 	struct configfs_dirent *sd;
 
 	/*
-	 * Since we can trust everything is pinned, we just need i_mutex
-	 * on the item.
+	 * Since we can trust everything is pinned, we just need
+	 * configfs_dirent_lock.
 	 */
-	mutex_lock(&target->ci_dentry->d_inode->i_mutex);
+	spin_lock(&configfs_dirent_lock);
 
 	sd = target->ci_dentry->d_fsdata;
 	BUG_ON(sd->s_dependent_count < 1);
@@ -1086,7 +1163,7 @@ void configfs_undepend_item(struct configfs_subsystem *subsys,
 	 * After this unlock, we cannot trust the item to stay alive!
 	 * DO NOT REFERENCE item after this unlock.
 	 */
-	mutex_unlock(&target->ci_dentry->d_inode->i_mutex);
+	spin_unlock(&configfs_dirent_lock);
 }
 EXPORT_SYMBOL(configfs_undepend_item);
 
@@ -1286,13 +1363,6 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	if (sd->s_type & CONFIGFS_USET_DEFAULT)
 		return -EPERM;
 
-	/*
-	 * Here's where we check for dependents.  We're protected by
-	 * i_mutex.
-	 */
-	if (sd->s_dependent_count)
-		return -EBUSY;
-
 	/* Get a working ref until we have the child */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	subsys = to_config_group(parent_item)->cg_subsys;
@@ -1316,9 +1386,17 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 
 		mutex_lock(&configfs_symlink_mutex);
 		spin_lock(&configfs_dirent_lock);
-		ret = configfs_detach_prep(dentry, &wait_mutex);
-		if (ret)
-			configfs_detach_rollback(dentry);
+		/*
+		 * Here's where we check for dependents.  We're protected by
+		 * configfs_dirent_lock.
+		 * If no dependent, atomically tag the item as dropping.
+		 */
+		ret = sd->s_dependent_count ? -EBUSY : 0;
+		if (!ret) {
+			ret = configfs_detach_prep(dentry, &wait_mutex);
+			if (ret)
+				configfs_detach_rollback(dentry);
+		}
 		spin_unlock(&configfs_dirent_lock);
 		mutex_unlock(&configfs_symlink_mutex);
 
@@ -1429,7 +1507,7 @@ static int configfs_dir_open(struct inode *inode, struct file *file)
 	 */
 	err = -ENOENT;
 	if (configfs_dirent_is_ready(parent_sd)) {
-		file->private_data = configfs_new_dirent(parent_sd, NULL);
+		file->private_data = configfs_new_dirent(parent_sd, NULL, 0);
 		if (IS_ERR(file->private_data))
 			err = PTR_ERR(file->private_data);
 		else
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 5d349d38e05..4921e7426d9 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -33,10 +33,15 @@
 #include <linux/backing-dev.h>
 #include <linux/capability.h>
 #include <linux/sched.h>
+#include <linux/lockdep.h>
 
 #include <linux/configfs.h>
 #include "configfs_internal.h"
 
+#ifdef CONFIG_LOCKDEP
+static struct lock_class_key default_group_class[MAX_LOCK_DEPTH];
+#endif
+
 extern struct super_block * configfs_sb;
 
 static const struct address_space_operations configfs_aops = {
@@ -150,6 +155,38 @@ struct inode * configfs_new_inode(mode_t mode, struct configfs_dirent * sd)
 	return inode;
 }
 
+#ifdef CONFIG_LOCKDEP
+
+static void configfs_set_inode_lock_class(struct configfs_dirent *sd,
+					  struct inode *inode)
+{
+	int depth = sd->s_depth;
+
+	if (depth > 0) {
+		if (depth <= ARRAY_SIZE(default_group_class)) {
+			lockdep_set_class(&inode->i_mutex,
+					  &default_group_class[depth - 1]);
+		} else {
+			/*
+			 * In practice the maximum level of locking depth is
+			 * already reached. Just inform about possible reasons.
+			 */
+			printk(KERN_INFO "configfs: Too many levels of inodes"
+			       " for the locking correctness validator.\n");
+			printk(KERN_INFO "Spurious warnings may appear.\n");
+		}
+	}
+}
+
+#else /* CONFIG_LOCKDEP */
+
+static void configfs_set_inode_lock_class(struct configfs_dirent *sd,
+					  struct inode *inode)
+{
+}
+
+#endif /* CONFIG_LOCKDEP */
+
 int configfs_create(struct dentry * dentry, int mode, int (*init)(struct inode *))
 {
 	int error = 0;
@@ -162,6 +199,7 @@ int configfs_create(struct dentry * dentry, int mode, int (*init)(struct inode *
 					struct inode *p_inode = dentry->d_parent->d_inode;
 					p_inode->i_mtime = p_inode->i_ctime = CURRENT_TIME;
 				}
+				configfs_set_inode_lock_class(sd, inode);
 				goto Proceed;
 			}
 			else
diff --git a/fs/dcache.c b/fs/dcache.c
index 75659a6fd1f..9e5cd3c3a6b 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1910,7 +1910,7 @@ char *__d_path(const struct path *path, struct path *root,
 
 	spin_lock(&vfsmount_lock);
 	prepend(&end, &buflen, "\0", 1);
-	if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
+	if (d_unlinked(dentry) &&
 		(prepend(&end, &buflen, " (deleted)", 10) != 0))
 			goto Elong;
 
@@ -2035,7 +2035,7 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen)
 
 	spin_lock(&dcache_lock);
 	prepend(&end, &buflen, "\0", 1);
-	if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
+	if (d_unlinked(dentry) &&
 		(prepend(&end, &buflen, "//deleted", 9) != 0))
 			goto Elong;
 	if (buflen < 1)
@@ -2097,9 +2097,8 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 	read_unlock(&current->fs->lock);
 
 	error = -ENOENT;
-	/* Has the current directory has been unlinked? */
 	spin_lock(&dcache_lock);
-	if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) {
+	if (!d_unlinked(pwd.dentry)) {
 		unsigned long len;
 		struct path tmp = root;
 		char * cwd;
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 21165cf934f..9b1d285f9fe 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -90,6 +90,15 @@ static inline struct super_block *pts_sb_from_inode(struct inode *inode)
 #define PARSE_MOUNT	0
 #define PARSE_REMOUNT	1
 
+/*
+ * parse_mount_options():
+ * 	Set @opts to mount options specified in @data. If an option is not
+ * 	specified in @data, set it to its default value. The exception is
+ * 	'newinstance' option which can only be set/cleared on a mount (i.e.
+ * 	cannot be changed during remount).
+ *
+ * Note: @data may be NULL (in which case all options are set to default).
+ */
 static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts)
 {
 	char *p;
@@ -355,12 +364,9 @@ static int devpts_get_sb(struct file_system_type *fs_type,
 	struct pts_mount_opts opts;
 	struct super_block *s;
 
-	memset(&opts, 0, sizeof(opts));
-	if (data) {
-		error = parse_mount_options(data, PARSE_MOUNT, &opts);
-		if (error)
-			return error;
-	}
+	error = parse_mount_options(data, PARSE_MOUNT, &opts);
+	if (error)
+		return error;
 
 	if (opts.newinstance)
 		s = sget(fs_type, NULL, set_anon_super, NULL);
@@ -551,8 +557,10 @@ static int __init init_devpts_fs(void)
 	int err = register_filesystem(&devpts_fs_type);
 	if (!err) {
 		devpts_mnt = kern_mount(&devpts_fs_type);
-		if (IS_ERR(devpts_mnt))
+		if (IS_ERR(devpts_mnt)) {
 			err = PTR_ERR(devpts_mnt);
+			unregister_filesystem(&devpts_fs_type);
+		}
 	}
 	return err;
 }
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 05763bbc205..8b10b87dc01 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -1127,7 +1127,7 @@ __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
 		rw = WRITE_ODIRECT;
 
 	if (bdev)
-		bdev_blkbits = blksize_bits(bdev_hardsect_size(bdev));
+		bdev_blkbits = blksize_bits(bdev_logical_block_size(bdev));
 
 	if (offset & blocksize_mask) {
 		if (bdev)
diff --git a/fs/dlm/dir.c b/fs/dlm/dir.c
index 858fba14aaa..c4dfa1dcc86 100644
--- a/fs/dlm/dir.c
+++ b/fs/dlm/dir.c
@@ -49,7 +49,8 @@ static struct dlm_direntry *get_free_de(struct dlm_ls *ls, int len)
 	spin_unlock(&ls->ls_recover_list_lock);
 
 	if (!found)
-		de = kzalloc(sizeof(struct dlm_direntry) + len, GFP_KERNEL);
+		de = kzalloc(sizeof(struct dlm_direntry) + len,
+			     ls->ls_allocation);
 	return de;
 }
 
@@ -211,7 +212,7 @@ int dlm_recover_directory(struct dlm_ls *ls)
 
 	dlm_dir_clear(ls);
 
-	last_name = kmalloc(DLM_RESNAME_MAXLEN, GFP_KERNEL);
+	last_name = kmalloc(DLM_RESNAME_MAXLEN, ls->ls_allocation);
 	if (!last_name)
 		goto out;
 
@@ -322,7 +323,7 @@ static int get_entry(struct dlm_ls *ls, int nodeid, char *name,
 	if (namelen > DLM_RESNAME_MAXLEN)
 		return -EINVAL;
 
-	de = kzalloc(sizeof(struct dlm_direntry) + namelen, GFP_KERNEL);
+	de = kzalloc(sizeof(struct dlm_direntry) + namelen, ls->ls_allocation);
 	if (!de)
 		return -ENOMEM;
 
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index cd8e2df3c29..d489fcc8671 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -384,7 +384,7 @@ static void threads_stop(void)
 	dlm_astd_stop();
 }
 
-static int new_lockspace(char *name, int namelen, void **lockspace,
+static int new_lockspace(const char *name, int namelen, void **lockspace,
 			 uint32_t flags, int lvblen)
 {
 	struct dlm_ls *ls;
@@ -419,16 +419,14 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 			break;
 		}
 		ls->ls_create_count++;
-		module_put(THIS_MODULE);
-		error = 1; /* not an error, return 0 */
+		*lockspace = ls;
+		error = 1;
 		break;
 	}
 	spin_unlock(&lslist_lock);
 
-	if (error < 0)
-		goto out;
 	if (error)
-		goto ret_zero;
+		goto out;
 
 	error = -ENOMEM;
 
@@ -583,7 +581,6 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 	dlm_create_debug_file(ls);
 
 	log_debug(ls, "join complete");
- ret_zero:
 	*lockspace = ls;
 	return 0;
 
@@ -614,7 +611,7 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 	return error;
 }
 
-int dlm_new_lockspace(char *name, int namelen, void **lockspace,
+int dlm_new_lockspace(const char *name, int namelen, void **lockspace,
 		      uint32_t flags, int lvblen)
 {
 	int error = 0;
@@ -628,7 +625,9 @@ int dlm_new_lockspace(char *name, int namelen, void **lockspace,
 	error = new_lockspace(name, namelen, lockspace, flags, lvblen);
 	if (!error)
 		ls_count++;
-	else if (!ls_count)
+	if (error > 0)
+		error = 0;
+	if (!ls_count)
 		threads_stop();
  out:
 	mutex_unlock(&ls_lock);
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 609108a8326..cdb580a9c7a 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -309,6 +309,20 @@ static void lowcomms_state_change(struct sock *sk)
 		lowcomms_write_space(sk);
 }
 
+int dlm_lowcomms_connect_node(int nodeid)
+{
+	struct connection *con;
+
+	if (nodeid == dlm_our_nodeid())
+		return 0;
+
+	con = nodeid2con(nodeid, GFP_NOFS);
+	if (!con)
+		return -ENOMEM;
+	lowcomms_connect_sock(con);
+	return 0;
+}
+
 /* Make a socket active */
 static int add_sock(struct socket *sock, struct connection *con)
 {
@@ -486,7 +500,7 @@ static void process_sctp_notification(struct connection *con,
 				return;
 			}
 
-			new_con = nodeid2con(nodeid, GFP_KERNEL);
+			new_con = nodeid2con(nodeid, GFP_NOFS);
 			if (!new_con)
 				return;
 
@@ -722,7 +736,7 @@ static int tcp_accept_from_sock(struct connection *con)
 	 *  the same time and the connections cross on the wire.
 	 *  In this case we store the incoming one in "othercon"
 	 */
-	newcon = nodeid2con(nodeid, GFP_KERNEL);
+	newcon = nodeid2con(nodeid, GFP_NOFS);
 	if (!newcon) {
 		result = -ENOMEM;
 		goto accept_err;
@@ -732,7 +746,7 @@ static int tcp_accept_from_sock(struct connection *con)
 		struct connection *othercon = newcon->othercon;
 
 		if (!othercon) {
-			othercon = kmem_cache_zalloc(con_cache, GFP_KERNEL);
+			othercon = kmem_cache_zalloc(con_cache, GFP_NOFS);
 			if (!othercon) {
 				log_print("failed to allocate incoming socket");
 				mutex_unlock(&newcon->sock_mutex);
@@ -1421,7 +1435,7 @@ static int work_start(void)
 static void stop_conn(struct connection *con)
 {
 	con->flags |= 0x0F;
-	if (con->sock)
+	if (con->sock && con->sock->sk)
 		con->sock->sk->sk_user_data = NULL;
 }
 
diff --git a/fs/dlm/lowcomms.h b/fs/dlm/lowcomms.h
index a9a9618c0d3..1311e642628 100644
--- a/fs/dlm/lowcomms.h
+++ b/fs/dlm/lowcomms.h
@@ -2,7 +2,7 @@
 *******************************************************************************
 **
 **  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2005 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2004-2009 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -19,6 +19,7 @@ void dlm_lowcomms_stop(void);
 int dlm_lowcomms_close(int nodeid);
 void *dlm_lowcomms_get_buffer(int nodeid, int len, gfp_t allocation, char **ppc);
 void dlm_lowcomms_commit_buffer(void *mh);
+int dlm_lowcomms_connect_node(int nodeid);
 
 #endif				/* __LOWCOMMS_DOT_H__ */
 
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 26133f05ae3..b128775913b 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -1,7 +1,7 @@
 /******************************************************************************
 *******************************************************************************
 **
-**  Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2005-2009 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -17,6 +17,7 @@
 #include "recover.h"
 #include "rcom.h"
 #include "config.h"
+#include "lowcomms.h"
 
 static void add_ordered_member(struct dlm_ls *ls, struct dlm_member *new)
 {
@@ -45,9 +46,9 @@ static void add_ordered_member(struct dlm_ls *ls, struct dlm_member *new)
 static int dlm_add_member(struct dlm_ls *ls, int nodeid)
 {
 	struct dlm_member *memb;
-	int w;
+	int w, error;
 
-	memb = kzalloc(sizeof(struct dlm_member), GFP_KERNEL);
+	memb = kzalloc(sizeof(struct dlm_member), ls->ls_allocation);
 	if (!memb)
 		return -ENOMEM;
 
@@ -57,6 +58,12 @@ static int dlm_add_member(struct dlm_ls *ls, int nodeid)
 		return w;
 	}
 
+	error = dlm_lowcomms_connect_node(nodeid);
+	if (error < 0) {
+		kfree(memb);
+		return error;
+	}
+
 	memb->nodeid = nodeid;
 	memb->weight = w;
 	add_ordered_member(ls, memb);
@@ -136,7 +143,7 @@ static void make_member_array(struct dlm_ls *ls)
 
 	ls->ls_total_weight = total;
 
-	array = kmalloc(sizeof(int) * total, GFP_KERNEL);
+	array = kmalloc(sizeof(int) * total, ls->ls_allocation);
 	if (!array)
 		return;
 
@@ -219,7 +226,7 @@ int dlm_recover_members(struct dlm_ls *ls, struct dlm_recover *rv, int *neg_out)
 			continue;
 		log_debug(ls, "new nodeid %d is a re-added member", rv->new[i]);
 
-		memb = kzalloc(sizeof(struct dlm_member), GFP_KERNEL);
+		memb = kzalloc(sizeof(struct dlm_member), ls->ls_allocation);
 		if (!memb)
 			return -ENOMEM;
 		memb->nodeid = rv->new[i];
@@ -334,7 +341,7 @@ int dlm_ls_start(struct dlm_ls *ls)
 	int *ids = NULL, *new = NULL;
 	int error, ids_count = 0, new_count = 0;
 
-	rv = kzalloc(sizeof(struct dlm_recover), GFP_KERNEL);
+	rv = kzalloc(sizeof(struct dlm_recover), ls->ls_allocation);
 	if (!rv)
 		return -ENOMEM;
 
diff --git a/fs/dlm/requestqueue.c b/fs/dlm/requestqueue.c
index daa4183fbb8..7a2307c0891 100644
--- a/fs/dlm/requestqueue.c
+++ b/fs/dlm/requestqueue.c
@@ -35,7 +35,7 @@ void dlm_add_requestqueue(struct dlm_ls *ls, int nodeid, struct dlm_message *ms)
 	struct rq_entry *e;
 	int length = ms->m_header.h_length - sizeof(struct dlm_message);
 
-	e = kmalloc(sizeof(struct rq_entry) + length, GFP_KERNEL);
+	e = kmalloc(sizeof(struct rq_entry) + length, ls->ls_allocation);
 	if (!e) {
 		log_print("dlm_add_requestqueue: out of memory len %d", length);
 		return;
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index fa4c7e7d15d..12d649602d3 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -27,6 +27,7 @@
 #include <linux/mount.h>
 #include <linux/key.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/file.h>
 #include <linux/crypto.h>
 #include "ecryptfs_kernel.h"
@@ -120,9 +121,13 @@ static void ecryptfs_put_super(struct super_block *sb)
 {
 	struct ecryptfs_sb_info *sb_info = ecryptfs_superblock_to_private(sb);
 
+	lock_kernel();
+
 	ecryptfs_destroy_mount_crypt_stat(&sb_info->mount_crypt_stat);
 	kmem_cache_free(ecryptfs_sb_info_cache, sb_info);
 	ecryptfs_set_superblock_private(sb, NULL);
+
+	unlock_kernel();
 }
 
 /**
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 2a701d593d3..3f0e1974abd 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -16,6 +16,7 @@
 #include <linux/anon_inodes.h>
 #include <linux/eventfd.h>
 #include <linux/syscalls.h>
+#include <linux/module.h>
 
 struct eventfd_ctx {
 	wait_queue_head_t wqh;
@@ -56,6 +57,7 @@ int eventfd_signal(struct file *file, int n)
 
 	return n;
 }
+EXPORT_SYMBOL_GPL(eventfd_signal);
 
 static int eventfd_release(struct inode *inode, struct file *file)
 {
@@ -197,6 +199,7 @@ struct file *eventfd_fget(int fd)
 
 	return file;
 }
+EXPORT_SYMBOL_GPL(eventfd_fget);
 
 SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
diff --git a/fs/exec.c b/fs/exec.c
index 895823d0149..e639957d7a5 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -33,6 +33,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
+#include <linux/perf_counter.h>
 #include <linux/highmem.h>
 #include <linux/spinlock.h>
 #include <linux/key.h>
@@ -922,6 +923,7 @@ void set_task_comm(struct task_struct *tsk, char *buf)
 	task_lock(tsk);
 	strlcpy(tsk->comm, buf, sizeof(tsk->comm));
 	task_unlock(tsk);
+	perf_counter_comm(tsk);
 }
 
 int flush_old_exec(struct linux_binprm * bprm)
@@ -990,6 +992,13 @@ int flush_old_exec(struct linux_binprm * bprm)
 
 	current->personality &= ~bprm->per_clear;
 
+	/*
+	 * Flush performance counters when crossing a
+	 * security domain:
+	 */
+	if (!get_dumpable(current->mm))
+		perf_counter_exit_task(current);
+
 	/* An exec changes our domain. We are no longer part of the thread
 	   group */
 
@@ -1016,7 +1025,7 @@ void install_exec_creds(struct linux_binprm *bprm)
 	commit_creds(bprm->cred);
 	bprm->cred = NULL;
 
-	/* cred_exec_mutex must be held at least to this point to prevent
+	/* cred_guard_mutex must be held at least to this point to prevent
 	 * ptrace_attach() from altering our determination of the task's
 	 * credentials; any time after this it may be unlocked */
 
@@ -1026,7 +1035,7 @@ EXPORT_SYMBOL(install_exec_creds);
 
 /*
  * determine how safe it is to execute the proposed program
- * - the caller must hold current->cred_exec_mutex to protect against
+ * - the caller must hold current->cred_guard_mutex to protect against
  *   PTRACE_ATTACH
  */
 int check_unsafe_exec(struct linux_binprm *bprm)
@@ -1268,7 +1277,7 @@ int do_execve(char * filename,
 	if (!bprm)
 		goto out_files;
 
-	retval = mutex_lock_interruptible(&current->cred_exec_mutex);
+	retval = mutex_lock_interruptible(&current->cred_guard_mutex);
 	if (retval < 0)
 		goto out_free;
 	current->in_execve = 1;
@@ -1331,7 +1340,7 @@ int do_execve(char * filename,
 	/* execve succeeded */
 	current->fs->in_exec = 0;
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_exec_mutex);
+	mutex_unlock(&current->cred_guard_mutex);
 	acct_update_integrals(current);
 	free_bprm(bprm);
 	if (displaced)
@@ -1354,7 +1363,7 @@ out_unmark:
 
 out_unlock:
 	current->in_execve = 0;
-	mutex_unlock(&current->cred_exec_mutex);
+	mutex_unlock(&current->cred_guard_mutex);
 
 out_free:
 	free_bprm(bprm);
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index b1512c4bb8c..24667eedc02 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -175,10 +175,4 @@ int exofs_async_op(struct osd_request *or,
 
 int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr);
 
-int osd_req_read_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
-int osd_req_write_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
 #endif /*ifndef __EXOFS_COM_H__*/
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index ba8d9fab469..77d0a295eb1 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -59,10 +59,9 @@ static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
 		struct inode *inode)
 {
 	struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
-	struct request_queue *req_q = sbi->s_dev->scsi_device->request_queue;
 
 	pcol->sbi = sbi;
-	pcol->req_q = req_q;
+	pcol->req_q = osd_request_queue(sbi->s_dev);
 	pcol->inode = inode;
 	pcol->expected_pages = expected_pages;
 
@@ -266,7 +265,7 @@ static int read_exec(struct page_collect *pcol, bool is_sync)
 		goto err;
 	}
 
-	osd_req_read(or, &obj, pcol->bio, i_start);
+	osd_req_read(or, &obj, i_start, pcol->bio, pcol->length);
 
 	if (is_sync) {
 		exofs_sync_op(or, pcol->sbi->s_timeout, oi->i_cred);
@@ -522,7 +521,8 @@ static int write_exec(struct page_collect *pcol)
 
 	*pcol_copy = *pcol;
 
-	osd_req_write(or, &obj, pcol_copy->bio, i_start);
+	pcol_copy->bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+	osd_req_write(or, &obj, i_start, pcol_copy->bio, pcol_copy->length);
 	ret = exofs_async_op(or, writepages_done, pcol_copy, oi->i_cred);
 	if (unlikely(ret)) {
 		EXOFS_ERR("write_exec: exofs_async_op() Faild\n");
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index b249ae97fb1..b3d2ccb87aa 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -50,10 +50,10 @@ int exofs_check_ok_resid(struct osd_request *or, u64 *in_resid, u64 *out_resid)
 
 	/* FIXME: should be include in osd_sense_info */
 	if (in_resid)
-		*in_resid = or->in.req ? or->in.req->data_len : 0;
+		*in_resid = or->in.req ? or->in.req->resid_len : 0;
 
 	if (out_resid)
-		*out_resid = or->out.req ? or->out.req->data_len : 0;
+		*out_resid = or->out.req ? or->out.req->resid_len : 0;
 
 	return ret;
 }
@@ -125,29 +125,3 @@ int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
 
 	return -EIO;
 }
-
-int osd_req_read_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
-	struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
-	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
-	if (!bio)
-		return -ENOMEM;
-
-	osd_req_read(or, obj, bio, offset);
-	return 0;
-}
-
-int osd_req_write_kern(struct osd_request *or,
-	const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
-	struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
-	struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
-	if (!bio)
-		return -ENOMEM;
-
-	osd_req_write(or, obj, bio, offset);
-	return 0;
-}
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 9f1985e857e..8216c5b77b5 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -200,20 +200,21 @@ static const struct export_operations exofs_export_ops;
 /*
  * Write the superblock to the OSD
  */
-static void exofs_write_super(struct super_block *sb)
+static int exofs_sync_fs(struct super_block *sb, int wait)
 {
 	struct exofs_sb_info *sbi;
 	struct exofs_fscb *fscb;
 	struct osd_request *or;
 	struct osd_obj_id obj;
-	int ret;
+	int ret = -ENOMEM;
 
 	fscb = kzalloc(sizeof(struct exofs_fscb), GFP_KERNEL);
 	if (!fscb) {
 		EXOFS_ERR("exofs_write_super: memory allocation failed.\n");
-		return;
+		return -ENOMEM;
 	}
 
+	lock_super(sb);
 	lock_kernel();
 	sbi = sb->s_fs_info;
 	fscb->s_nextid = cpu_to_le64(sbi->s_nextid);
@@ -246,7 +247,17 @@ out:
 	if (or)
 		osd_end_request(or);
 	unlock_kernel();
+	unlock_super(sb);
 	kfree(fscb);
+	return ret;
+}
+
+static void exofs_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		exofs_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 /*
@@ -258,6 +269,11 @@ static void exofs_put_super(struct super_block *sb)
 	int num_pend;
 	struct exofs_sb_info *sbi = sb->s_fs_info;
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		exofs_write_super(sb);
+
 	/* make sure there are no pending commands */
 	for (num_pend = atomic_read(&sbi->s_curr_pending); num_pend > 0;
 	     num_pend = atomic_read(&sbi->s_curr_pending)) {
@@ -271,6 +287,8 @@ static void exofs_put_super(struct super_block *sb)
 	osduld_put_device(sbi->s_dev);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 /*
@@ -484,6 +502,7 @@ static const struct super_operations exofs_sops = {
 	.delete_inode   = exofs_delete_inode,
 	.put_super      = exofs_put_super,
 	.write_super    = exofs_write_super,
+	.sync_fs	= exofs_sync_fs,
 	.statfs         = exofs_statfs,
 };
 
diff --git a/fs/ext2/Makefile b/fs/ext2/Makefile
index e0b2b43c1fd..f42af45cfd8 100644
--- a/fs/ext2/Makefile
+++ b/fs/ext2/Makefile
@@ -4,7 +4,7 @@
 
 obj-$(CONFIG_EXT2_FS) += ext2.o
 
-ext2-y := balloc.o dir.o file.o fsync.o ialloc.o inode.o \
+ext2-y := balloc.o dir.o file.o ialloc.o inode.o \
 	  ioctl.o namei.o super.o symlink.o
 
 ext2-$(CONFIG_EXT2_FS_XATTR)	 += xattr.o xattr_user.o xattr_trusted.o
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 2999d72153b..003500498c2 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -720,5 +720,5 @@ const struct file_operations ext2_dir_operations = {
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ext2_compat_ioctl,
 #endif
-	.fsync		= ext2_sync_file,
+	.fsync		= simple_fsync,
 };
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 3203042b36e..f2e5811936d 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -27,7 +27,7 @@ struct ext2_inode_info {
 	/*
 	 * i_block_group is the number of the block group which contains
 	 * this file's inode.  Constant across the lifetime of the inode,
-	 * it is ued for making block allocation decisions - we try to
+	 * it is used for making block allocation decisions - we try to
 	 * place a file's data blocks near its inode block, and new inodes
 	 * near to their parent directory's inode.
 	 */
@@ -113,9 +113,6 @@ extern int ext2_empty_dir (struct inode *);
 extern struct ext2_dir_entry_2 * ext2_dotdot (struct inode *, struct page **);
 extern void ext2_set_link(struct inode *, struct ext2_dir_entry_2 *, struct page *, struct inode *);
 
-/* fsync.c */
-extern int ext2_sync_file (struct file *, struct dentry *, int);
-
 /* ialloc.c */
 extern struct inode * ext2_new_inode (struct inode *, int);
 extern void ext2_free_inode (struct inode *);
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 45ed0712218..2b9e47dc922 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -55,7 +55,7 @@ const struct file_operations ext2_file_operations = {
 	.mmap		= generic_file_mmap,
 	.open		= generic_file_open,
 	.release	= ext2_release_file,
-	.fsync		= ext2_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= generic_file_splice_write,
 };
@@ -72,7 +72,7 @@ const struct file_operations ext2_xip_file_operations = {
 	.mmap		= xip_file_mmap,
 	.open		= generic_file_open,
 	.release	= ext2_release_file,
-	.fsync		= ext2_sync_file,
+	.fsync		= simple_fsync,
 };
 #endif
 
diff --git a/fs/ext2/fsync.c b/fs/ext2/fsync.c
deleted file mode 100644
index fc66c93fcb5..00000000000
--- a/fs/ext2/fsync.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/fs/ext2/fsync.c
- *
- *  Copyright (C) 1993  Stephen Tweedie (sct@dcs.ed.ac.uk)
- *  from
- *  Copyright (C) 1992  Remy Card (card@masi.ibp.fr)
- *                      Laboratoire MASI - Institut Blaise Pascal
- *                      Universite Pierre et Marie Curie (Paris VI)
- *  from
- *  linux/fs/minix/truncate.c   Copyright (C) 1991, 1992  Linus Torvalds
- * 
- *  ext2fs fsync primitive
- *
- *  Big-endian to little-endian byte-swapping/bitmaps by
- *        David S. Miller (davem@caip.rutgers.edu), 1995
- * 
- *  Removed unnecessary code duplication for little endian machines
- *  and excessive __inline__s. 
- *        Andi Kleen, 1997
- *
- * Major simplications and cleanup - we only need to do the metadata, because
- * we can depend on generic_block_fdatasync() to sync the data blocks.
- */
-
-#include "ext2.h"
-#include <linux/buffer_head.h>		/* for sync_mapping_buffers() */
-
-
-/*
- *	File may be NULL when we are called. Perhaps we shouldn't
- *	even pass file to fsync ?
- */
-
-int ext2_sync_file(struct file *file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-	int ret;
-
-	ret = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return ret;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return ret;
-
-	err = ext2_sync_inode(inode);
-	if (ret == 0)
-		ret = err;
-	return ret;
-}
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index acf67883110..29ed682061f 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -41,8 +41,6 @@ MODULE_AUTHOR("Remy Card and others");
 MODULE_DESCRIPTION("Second Extended Filesystem");
 MODULE_LICENSE("GPL");
 
-static int ext2_update_inode(struct inode * inode, int do_sync);
-
 /*
  * Test whether an inode is a fast symlink.
  */
@@ -66,7 +64,7 @@ void ext2_delete_inode (struct inode * inode)
 		goto no_delete;
 	EXT2_I(inode)->i_dtime	= get_seconds();
 	mark_inode_dirty(inode);
-	ext2_update_inode(inode, inode_needs_sync(inode));
+	ext2_write_inode(inode, inode_needs_sync(inode));
 
 	inode->i_size = 0;
 	if (inode->i_blocks)
@@ -1337,7 +1335,7 @@ bad_inode:
 	return ERR_PTR(ret);
 }
 
-static int ext2_update_inode(struct inode * inode, int do_sync)
+int ext2_write_inode(struct inode *inode, int do_sync)
 {
 	struct ext2_inode_info *ei = EXT2_I(inode);
 	struct super_block *sb = inode->i_sb;
@@ -1442,11 +1440,6 @@ static int ext2_update_inode(struct inode * inode, int do_sync)
 	return err;
 }
 
-int ext2_write_inode(struct inode *inode, int wait)
-{
-	return ext2_update_inode(inode, wait);
-}
-
 int ext2_sync_inode(struct inode *inode)
 {
 	struct writeback_control wbc = {
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 5c4afe65224..458999638c3 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -42,6 +42,7 @@ static void ext2_sync_super(struct super_block *sb,
 			    struct ext2_super_block *es);
 static int ext2_remount (struct super_block * sb, int * flags, char * data);
 static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf);
+static int ext2_sync_fs(struct super_block *sb, int wait);
 
 void ext2_error (struct super_block * sb, const char * function,
 		 const char * fmt, ...)
@@ -114,6 +115,11 @@ static void ext2_put_super (struct super_block * sb)
 	int i;
 	struct ext2_sb_info *sbi = EXT2_SB(sb);
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		ext2_write_super(sb);
+
 	ext2_xattr_put_super(sb);
 	if (!(sb->s_flags & MS_RDONLY)) {
 		struct ext2_super_block *es = sbi->s_es;
@@ -135,7 +141,7 @@ static void ext2_put_super (struct super_block * sb)
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 
-	return;
+	unlock_kernel();
 }
 
 static struct kmem_cache * ext2_inode_cachep;
@@ -304,6 +310,7 @@ static const struct super_operations ext2_sops = {
 	.delete_inode	= ext2_delete_inode,
 	.put_super	= ext2_put_super,
 	.write_super	= ext2_write_super,
+	.sync_fs	= ext2_sync_fs,
 	.statfs		= ext2_statfs,
 	.remount_fs	= ext2_remount,
 	.clear_inode	= ext2_clear_inode,
@@ -1093,6 +1100,7 @@ failed_mount:
 	brelse(bh);
 failed_sbi:
 	sb->s_fs_info = NULL;
+	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 	return ret;
 }
@@ -1126,25 +1134,36 @@ static void ext2_sync_super(struct super_block *sb, struct ext2_super_block *es)
  * set s_state to EXT2_VALID_FS after some corrections.
  */
 
-void ext2_write_super (struct super_block * sb)
+static int ext2_sync_fs(struct super_block *sb, int wait)
 {
-	struct ext2_super_block * es;
+	struct ext2_super_block *es = EXT2_SB(sb)->s_es;
+
 	lock_kernel();
-	if (!(sb->s_flags & MS_RDONLY)) {
-		es = EXT2_SB(sb)->s_es;
-
-		if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
-			ext2_debug ("setting valid to 0\n");
-			es->s_state &= cpu_to_le16(~EXT2_VALID_FS);
-			es->s_free_blocks_count = cpu_to_le32(ext2_count_free_blocks(sb));
-			es->s_free_inodes_count = cpu_to_le32(ext2_count_free_inodes(sb));
-			es->s_mtime = cpu_to_le32(get_seconds());
-			ext2_sync_super(sb, es);
-		} else
-			ext2_commit_super (sb, es);
+	if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
+		ext2_debug("setting valid to 0\n");
+		es->s_state &= cpu_to_le16(~EXT2_VALID_FS);
+		es->s_free_blocks_count =
+			cpu_to_le32(ext2_count_free_blocks(sb));
+		es->s_free_inodes_count =
+			cpu_to_le32(ext2_count_free_inodes(sb));
+		es->s_mtime = cpu_to_le32(get_seconds());
+		ext2_sync_super(sb, es);
+	} else {
+		ext2_commit_super(sb, es);
 	}
 	sb->s_dirt = 0;
 	unlock_kernel();
+
+	return 0;
+}
+
+
+void ext2_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		ext2_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static int ext2_remount (struct super_block * sb, int * flags, char * data)
@@ -1156,6 +1175,8 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
 	unsigned long old_sb_flags;
 	int err;
 
+	lock_kernel();
+
 	/* Store the old options */
 	old_sb_flags = sb->s_flags;
 	old_opts.s_mount_opt = sbi->s_mount_opt;
@@ -1191,12 +1212,16 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
 		sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
 		sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
 	}
-	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
+		unlock_kernel();
 		return 0;
+	}
 	if (*flags & MS_RDONLY) {
 		if (le16_to_cpu(es->s_state) & EXT2_VALID_FS ||
-		    !(sbi->s_mount_state & EXT2_VALID_FS))
+		    !(sbi->s_mount_state & EXT2_VALID_FS)) {
+			unlock_kernel();
 			return 0;
+		}
 		/*
 		 * OK, we are remounting a valid rw partition rdonly, so set
 		 * the rdonly flag and then mark the partition as valid again.
@@ -1223,12 +1248,14 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
 			sb->s_flags &= ~MS_RDONLY;
 	}
 	ext2_sync_super(sb, es);
+	unlock_kernel();
 	return 0;
 restore_opts:
 	sbi->s_mount_opt = old_opts.s_mount_opt;
 	sbi->s_resuid = old_opts.s_resuid;
 	sbi->s_resgid = old_opts.s_resgid;
 	sb->s_flags = old_sb_flags;
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 225202db897..27967f92e82 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -649,7 +649,7 @@ do_more:
 		count = overflow;
 		goto do_more;
 	}
-	sb->s_dirt = 1;
+
 error_return:
 	brelse(bitmap_bh);
 	ext3_std_error(sb, err);
@@ -1708,7 +1708,6 @@ allocated:
 	if (!fatal)
 		fatal = err;
 
-	sb->s_dirt = 1;
 	if (fatal)
 		goto out;
 
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index dd13d60d524..b3999128513 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -181,7 +181,7 @@ void ext3_free_inode (handle_t *handle, struct inode * inode)
 	err = ext3_journal_dirty_metadata(handle, bitmap_bh);
 	if (!fatal)
 		fatal = err;
-	sb->s_dirt = 1;
+
 error_return:
 	brelse(bitmap_bh);
 	ext3_std_error(sb, fatal);
@@ -537,7 +537,6 @@ got:
 	percpu_counter_dec(&sbi->s_freeinodes_counter);
 	if (S_ISDIR(mode))
 		percpu_counter_inc(&sbi->s_dirs_counter);
-	sb->s_dirt = 1;
 
 	inode->i_uid = current_fsuid();
 	if (test_opt (sb, GRPID))
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index fcfa2436185..b0248c6d5d4 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2960,7 +2960,6 @@ static int ext3_do_update_inode(handle_t *handle,
 				ext3_update_dynamic_rev(sb);
 				EXT3_SET_RO_COMPAT_FEATURE(sb,
 					EXT3_FEATURE_RO_COMPAT_LARGE_FILE);
-				sb->s_dirt = 1;
 				handle->h_sync = 1;
 				err = ext3_journal_dirty_metadata(handle,
 						EXT3_SB(sb)->s_sbh);
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 78fdf383637..8a0b26340b5 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -934,7 +934,6 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input)
 			   EXT3_INODES_PER_GROUP(sb));
 
 	ext3_journal_dirty_metadata(handle, sbi->s_sbh);
-	sb->s_dirt = 1;
 
 exit_journal:
 	unlock_super(sb);
@@ -1066,7 +1065,6 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
 	}
 	es->s_blocks_count = cpu_to_le32(o_blocks_count + add);
 	ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
-	sb->s_dirt = 1;
 	unlock_super(sb);
 	ext3_debug("freeing blocks %lu through "E3FSBLK"\n", o_blocks_count,
 		   o_blocks_count + add);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 599dbfe504c..26aa64dee6a 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -67,7 +67,6 @@ static const char *ext3_decode_error(struct super_block * sb, int errno,
 static int ext3_remount (struct super_block * sb, int * flags, char * data);
 static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf);
 static int ext3_unfreeze(struct super_block *sb);
-static void ext3_write_super (struct super_block * sb);
 static int ext3_freeze(struct super_block *sb);
 
 /*
@@ -399,6 +398,8 @@ static void ext3_put_super (struct super_block * sb)
 	struct ext3_super_block *es = sbi->s_es;
 	int i, err;
 
+	lock_kernel();
+
 	ext3_xattr_put_super(sb);
 	err = journal_destroy(sbi->s_journal);
 	sbi->s_journal = NULL;
@@ -447,7 +448,8 @@ static void ext3_put_super (struct super_block * sb)
 	sb->s_fs_info = NULL;
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
-	return;
+
+	unlock_kernel();
 }
 
 static struct kmem_cache *ext3_inode_cachep;
@@ -761,7 +763,6 @@ static const struct super_operations ext3_sops = {
 	.dirty_inode	= ext3_dirty_inode,
 	.delete_inode	= ext3_delete_inode,
 	.put_super	= ext3_put_super,
-	.write_super	= ext3_write_super,
 	.sync_fs	= ext3_sync_fs,
 	.freeze_fs	= ext3_freeze,
 	.unfreeze_fs	= ext3_unfreeze,
@@ -1696,7 +1697,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 		goto failed_mount;
 	}
 
-	hblock = bdev_hardsect_size(sb->s_bdev);
+	hblock = bdev_logical_block_size(sb->s_bdev);
 	if (sb->s_blocksize != blocksize) {
 		/*
 		 * Make sure the blocksize for the filesystem is larger
@@ -1785,7 +1786,6 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 #else
 		es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
 #endif
-		sb->s_dirt = 1;
 	}
 
 	if (sbi->s_blocks_per_group > blocksize * 8) {
@@ -2021,6 +2021,7 @@ failed_mount:
 	brelse(bh);
 out_fail:
 	sb->s_fs_info = NULL;
+	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 	lock_kernel();
 	return ret;
@@ -2119,7 +2120,7 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
 	}
 
 	blocksize = sb->s_blocksize;
-	hblock = bdev_hardsect_size(bdev);
+	hblock = bdev_logical_block_size(bdev);
 	if (blocksize < hblock) {
 		printk(KERN_ERR
 			"EXT3-fs: blocksize too small for journal device.\n");
@@ -2264,7 +2265,6 @@ static int ext3_load_journal(struct super_block *sb,
 	if (journal_devnum &&
 	    journal_devnum != le32_to_cpu(es->s_journal_dev)) {
 		es->s_journal_dev = cpu_to_le32(journal_devnum);
-		sb->s_dirt = 1;
 
 		/* Make sure we flush the recovery flag to disk. */
 		ext3_commit_super(sb, es, 1);
@@ -2307,7 +2307,6 @@ static int ext3_create_journal(struct super_block * sb,
 	EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL);
 
 	es->s_journal_inum = cpu_to_le32(journal_inum);
-	sb->s_dirt = 1;
 
 	/* Make sure we flush the recovery flag to disk. */
 	ext3_commit_super(sb, es, 1);
@@ -2353,7 +2352,6 @@ static void ext3_mark_recovery_complete(struct super_block * sb,
 	if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
 	    sb->s_flags & MS_RDONLY) {
 		EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
-		sb->s_dirt = 0;
 		ext3_commit_super(sb, es, 1);
 	}
 	unlock_super(sb);
@@ -2412,29 +2410,14 @@ int ext3_force_commit(struct super_block *sb)
 		return 0;
 
 	journal = EXT3_SB(sb)->s_journal;
-	sb->s_dirt = 0;
 	ret = ext3_journal_force_commit(journal);
 	return ret;
 }
 
-/*
- * Ext3 always journals updates to the superblock itself, so we don't
- * have to propagate any other updates to the superblock on disk at this
- * point.  (We can probably nuke this function altogether, and remove
- * any mention to sb->s_dirt in all of fs/ext3; eventual cleanup...)
- */
-static void ext3_write_super (struct super_block * sb)
-{
-	if (mutex_trylock(&sb->s_lock) != 0)
-		BUG();
-	sb->s_dirt = 0;
-}
-
 static int ext3_sync_fs(struct super_block *sb, int wait)
 {
 	tid_t target;
 
-	sb->s_dirt = 0;
 	if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
 		if (wait)
 			log_wait_commit(EXT3_SB(sb)->s_journal, target);
@@ -2450,7 +2433,6 @@ static int ext3_freeze(struct super_block *sb)
 {
 	int error = 0;
 	journal_t *journal;
-	sb->s_dirt = 0;
 
 	if (!(sb->s_flags & MS_RDONLY)) {
 		journal = EXT3_SB(sb)->s_journal;
@@ -2508,7 +2490,10 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
 	int i;
 #endif
 
+	lock_kernel();
+
 	/* Store the original options */
+	lock_super(sb);
 	old_sb_flags = sb->s_flags;
 	old_opts.s_mount_opt = sbi->s_mount_opt;
 	old_opts.s_resuid = sbi->s_resuid;
@@ -2616,6 +2601,8 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
 		    old_opts.s_qf_names[i] != sbi->s_qf_names[i])
 			kfree(old_opts.s_qf_names[i]);
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return 0;
 restore_opts:
 	sb->s_flags = old_sb_flags;
@@ -2632,6 +2619,8 @@ restore_opts:
 		sbi->s_qf_names[i] = old_opts.s_qf_names[i];
 	}
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index 83b7be849bd..545e37c4b91 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -463,7 +463,6 @@ static void ext3_xattr_update_super_block(handle_t *handle,
 
 	if (ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh) == 0) {
 		EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_EXT_ATTR);
-		sb->s_dirt = 1;
 		ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
 	}
 }
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index a8ff003a00f..8a34710ecf4 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -5,8 +5,8 @@
 obj-$(CONFIG_EXT4_FS) += ext4.o
 
 ext4-y	:= balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
-		   ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \
-		   ext4_jbd2.o migrate.o mballoc.o
+		ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \
+		ext4_jbd2.o migrate.o mballoc.o block_validity.o
 
 ext4-$(CONFIG_EXT4_FS_XATTR)		+= xattr.o xattr_user.o xattr_trusted.o
 ext4-$(CONFIG_EXT4_FS_POSIX_ACL)	+= acl.o
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 53c72ad8587..e2126d70dff 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -19,7 +19,6 @@
 #include <linux/buffer_head.h>
 #include "ext4.h"
 #include "ext4_jbd2.h"
-#include "group.h"
 #include "mballoc.h"
 
 /*
@@ -88,6 +87,7 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
 		 ext4_group_t block_group, struct ext4_group_desc *gdp)
 {
 	int bit, bit_max;
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	unsigned free_blocks, group_blocks;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
@@ -123,7 +123,7 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
 		bit_max += ext4_bg_num_gdb(sb, block_group);
 	}
 
-	if (block_group == sbi->s_groups_count - 1) {
+	if (block_group == ngroups - 1) {
 		/*
 		 * Even though mke2fs always initialize first and last group
 		 * if some other tool enabled the EXT4_BG_BLOCK_UNINIT we need
@@ -131,7 +131,7 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
 		 */
 		group_blocks = ext4_blocks_count(sbi->s_es) -
 			le32_to_cpu(sbi->s_es->s_first_data_block) -
-			(EXT4_BLOCKS_PER_GROUP(sb) * (sbi->s_groups_count - 1));
+			(EXT4_BLOCKS_PER_GROUP(sb) * (ngroups - 1));
 	} else {
 		group_blocks = EXT4_BLOCKS_PER_GROUP(sb);
 	}
@@ -205,18 +205,18 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb,
 {
 	unsigned int group_desc;
 	unsigned int offset;
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	struct ext4_group_desc *desc;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
-	if (block_group >= sbi->s_groups_count) {
+	if (block_group >= ngroups) {
 		ext4_error(sb, "ext4_get_group_desc",
 			   "block_group >= groups_count - "
 			   "block_group = %u, groups_count = %u",
-			   block_group, sbi->s_groups_count);
+			   block_group, ngroups);
 
 		return NULL;
 	}
-	smp_rmb();
 
 	group_desc = block_group >> EXT4_DESC_PER_BLOCK_BITS(sb);
 	offset = block_group & (EXT4_DESC_PER_BLOCK(sb) - 1);
@@ -326,16 +326,16 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group)
 		unlock_buffer(bh);
 		return bh;
 	}
-	spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	ext4_lock_group(sb, block_group);
 	if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 		ext4_init_block_bitmap(sb, bh, block_group, desc);
 		set_bitmap_uptodate(bh);
 		set_buffer_uptodate(bh);
-		spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+		ext4_unlock_group(sb, block_group);
 		unlock_buffer(bh);
 		return bh;
 	}
-	spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	ext4_unlock_group(sb, block_group);
 	if (buffer_uptodate(bh)) {
 		/*
 		 * if not uninit if bh is uptodate,
@@ -451,7 +451,7 @@ void ext4_add_groupblocks(handle_t *handle, struct super_block *sb,
 	down_write(&grp->alloc_sem);
 	for (i = 0, blocks_freed = 0; i < count; i++) {
 		BUFFER_TRACE(bitmap_bh, "clear bit");
-		if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
+		if (!ext4_clear_bit_atomic(ext4_group_lock_ptr(sb, block_group),
 						bit + i, bitmap_bh->b_data)) {
 			ext4_error(sb, __func__,
 				   "bit already cleared for block %llu",
@@ -461,11 +461,11 @@ void ext4_add_groupblocks(handle_t *handle, struct super_block *sb,
 			blocks_freed++;
 		}
 	}
-	spin_lock(sb_bgl_lock(sbi, block_group));
+	ext4_lock_group(sb, block_group);
 	blk_free_count = blocks_freed + ext4_free_blks_count(sb, desc);
 	ext4_free_blks_set(sb, desc, blk_free_count);
 	desc->bg_checksum = ext4_group_desc_csum(sbi, block_group, desc);
-	spin_unlock(sb_bgl_lock(sbi, block_group));
+	ext4_unlock_group(sb, block_group);
 	percpu_counter_add(&sbi->s_freeblocks_counter, blocks_freed);
 
 	if (sbi->s_log_groups_per_flex) {
@@ -665,7 +665,7 @@ ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb)
 	ext4_fsblk_t desc_count;
 	struct ext4_group_desc *gdp;
 	ext4_group_t i;
-	ext4_group_t ngroups = EXT4_SB(sb)->s_groups_count;
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 #ifdef EXT4FS_DEBUG
 	struct ext4_super_block *es;
 	ext4_fsblk_t bitmap_count;
@@ -677,7 +677,6 @@ ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb)
 	bitmap_count = 0;
 	gdp = NULL;
 
-	smp_rmb();
 	for (i = 0; i < ngroups; i++) {
 		gdp = ext4_get_group_desc(sb, i, NULL);
 		if (!gdp)
@@ -700,7 +699,6 @@ ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb)
 	return bitmap_count;
 #else
 	desc_count = 0;
-	smp_rmb();
 	for (i = 0; i < ngroups; i++) {
 		gdp = ext4_get_group_desc(sb, i, NULL);
 		if (!gdp)
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
new file mode 100644
index 00000000000..50784ef0756
--- /dev/null
+++ b/fs/ext4/block_validity.c
@@ -0,0 +1,244 @@
+/*
+ *  linux/fs/ext4/block_validity.c
+ *
+ * Copyright (C) 2009
+ * Theodore Ts'o (tytso@mit.edu)
+ *
+ * Track which blocks in the filesystem are metadata blocks that
+ * should never be used as data blocks by files or directories.
+ */
+
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/namei.h>
+#include <linux/quotaops.h>
+#include <linux/buffer_head.h>
+#include <linux/module.h>
+#include <linux/swap.h>
+#include <linux/pagemap.h>
+#include <linux/version.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include "ext4.h"
+
+struct ext4_system_zone {
+	struct rb_node	node;
+	ext4_fsblk_t	start_blk;
+	unsigned int	count;
+};
+
+static struct kmem_cache *ext4_system_zone_cachep;
+
+int __init init_ext4_system_zone(void)
+{
+	ext4_system_zone_cachep = KMEM_CACHE(ext4_system_zone,
+					     SLAB_RECLAIM_ACCOUNT);
+	if (ext4_system_zone_cachep == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+void exit_ext4_system_zone(void)
+{
+	kmem_cache_destroy(ext4_system_zone_cachep);
+}
+
+static inline int can_merge(struct ext4_system_zone *entry1,
+		     struct ext4_system_zone *entry2)
+{
+	if ((entry1->start_blk + entry1->count) == entry2->start_blk)
+		return 1;
+	return 0;
+}
+
+/*
+ * Mark a range of blocks as belonging to the "system zone" --- that
+ * is, filesystem metadata blocks which should never be used by
+ * inodes.
+ */
+static int add_system_zone(struct ext4_sb_info *sbi,
+			   ext4_fsblk_t start_blk,
+			   unsigned int count)
+{
+	struct ext4_system_zone *new_entry = NULL, *entry;
+	struct rb_node **n = &sbi->system_blks.rb_node, *node;
+	struct rb_node *parent = NULL, *new_node = NULL;
+
+	while (*n) {
+		parent = *n;
+		entry = rb_entry(parent, struct ext4_system_zone, node);
+		if (start_blk < entry->start_blk)
+			n = &(*n)->rb_left;
+		else if (start_blk >= (entry->start_blk + entry->count))
+			n = &(*n)->rb_right;
+		else {
+			if (start_blk + count > (entry->start_blk + 
+						 entry->count))
+				entry->count = (start_blk + count - 
+						entry->start_blk);
+			new_node = *n;
+			new_entry = rb_entry(new_node, struct ext4_system_zone,
+					     node);
+			break;
+		}
+	}
+
+	if (!new_entry) {
+		new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
+					     GFP_KERNEL);
+		if (!new_entry)
+			return -ENOMEM;
+		new_entry->start_blk = start_blk;
+		new_entry->count = count;
+		new_node = &new_entry->node;
+
+		rb_link_node(new_node, parent, n);
+		rb_insert_color(new_node, &sbi->system_blks);
+	}
+
+	/* Can we merge to the left? */
+	node = rb_prev(new_node);
+	if (node) {
+		entry = rb_entry(node, struct ext4_system_zone, node);
+		if (can_merge(entry, new_entry)) {
+			new_entry->start_blk = entry->start_blk;
+			new_entry->count += entry->count;
+			rb_erase(node, &sbi->system_blks);
+			kmem_cache_free(ext4_system_zone_cachep, entry);
+		}
+	}
+
+	/* Can we merge to the right? */
+	node = rb_next(new_node);
+	if (node) {
+		entry = rb_entry(node, struct ext4_system_zone, node);
+		if (can_merge(new_entry, entry)) {
+			new_entry->count += entry->count;
+			rb_erase(node, &sbi->system_blks);
+			kmem_cache_free(ext4_system_zone_cachep, entry);
+		}
+	}
+	return 0;
+}
+
+static void debug_print_tree(struct ext4_sb_info *sbi)
+{
+	struct rb_node *node;
+	struct ext4_system_zone *entry;
+	int first = 1;
+
+	printk(KERN_INFO "System zones: ");
+	node = rb_first(&sbi->system_blks);
+	while (node) {
+		entry = rb_entry(node, struct ext4_system_zone, node);
+		printk("%s%llu-%llu", first ? "" : ", ",
+		       entry->start_blk, entry->start_blk + entry->count - 1);
+		first = 0;
+		node = rb_next(node);
+	}
+	printk("\n");
+}
+
+int ext4_setup_system_zone(struct super_block *sb)
+{
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	struct ext4_group_desc *gdp;
+	ext4_group_t i;
+	int flex_size = ext4_flex_bg_size(sbi);
+	int ret;
+
+	if (!test_opt(sb, BLOCK_VALIDITY)) {
+		if (EXT4_SB(sb)->system_blks.rb_node)
+			ext4_release_system_zone(sb);
+		return 0;
+	}
+	if (EXT4_SB(sb)->system_blks.rb_node)
+		return 0;
+
+	for (i=0; i < ngroups; i++) {
+		if (ext4_bg_has_super(sb, i) &&
+		    ((i < 5) || ((i % flex_size) == 0)))
+			add_system_zone(sbi, ext4_group_first_block_no(sb, i),
+					sbi->s_gdb_count + 1);
+		gdp = ext4_get_group_desc(sb, i, NULL);
+		ret = add_system_zone(sbi, ext4_block_bitmap(sb, gdp), 1);
+		if (ret)
+			return ret;
+		ret = add_system_zone(sbi, ext4_inode_bitmap(sb, gdp), 1);
+		if (ret)
+			return ret;
+		ret = add_system_zone(sbi, ext4_inode_table(sb, gdp),
+				sbi->s_itb_per_group);
+		if (ret)
+			return ret;
+	}
+
+	if (test_opt(sb, DEBUG))
+		debug_print_tree(EXT4_SB(sb));
+	return 0;
+}
+
+/* Called when the filesystem is unmounted */
+void ext4_release_system_zone(struct super_block *sb)
+{
+	struct rb_node	*n = EXT4_SB(sb)->system_blks.rb_node;
+	struct rb_node	*parent;
+	struct ext4_system_zone	*entry;
+
+	while (n) {
+		/* Do the node's children first */
+		if (n->rb_left) {
+			n = n->rb_left;
+			continue;
+		}
+		if (n->rb_right) {
+			n = n->rb_right;
+			continue;
+		}
+		/*
+		 * The node has no children; free it, and then zero
+		 * out parent's link to it.  Finally go to the
+		 * beginning of the loop and try to free the parent
+		 * node.
+		 */
+		parent = rb_parent(n);
+		entry = rb_entry(n, struct ext4_system_zone, node);
+		kmem_cache_free(ext4_system_zone_cachep, entry);
+		if (!parent)
+			EXT4_SB(sb)->system_blks.rb_node = NULL;
+		else if (parent->rb_left == n)
+			parent->rb_left = NULL;
+		else if (parent->rb_right == n)
+			parent->rb_right = NULL;
+		n = parent;
+	}
+	EXT4_SB(sb)->system_blks.rb_node = NULL;
+}
+
+/*
+ * Returns 1 if the passed-in block region (start_blk,
+ * start_blk+count) is valid; 0 if some part of the block region
+ * overlaps with filesystem metadata blocks.
+ */
+int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk,
+			  unsigned int count)
+{
+	struct ext4_system_zone *entry;
+	struct rb_node *n = sbi->system_blks.rb_node;
+
+	if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
+	    (start_blk + count > ext4_blocks_count(sbi->s_es)))
+		return 0;
+	while (n) {
+		entry = rb_entry(n, struct ext4_system_zone, node);
+		if (start_blk + count - 1 < entry->start_blk)
+			n = n->rb_left;
+		else if (start_blk >= (entry->start_blk + entry->count))
+			n = n->rb_right;
+		else
+			return 0;
+	}
+	return 1;
+}
+
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index b64789929a6..9dc93168e26 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -131,8 +131,7 @@ static int ext4_readdir(struct file *filp,
 		struct buffer_head *bh = NULL;
 
 		map_bh.b_state = 0;
-		err = ext4_get_blocks_wrap(NULL, inode, blk, 1, &map_bh,
-						0, 0, 0);
+		err = ext4_get_blocks(NULL, inode, blk, 1, &map_bh, 0);
 		if (err > 0) {
 			pgoff_t index = map_bh.b_blocknr >>
 					(PAGE_CACHE_SHIFT - inode->i_blkbits);
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index d0f15ef56de..cc7d5edc38c 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -21,7 +21,14 @@
 #include <linux/magic.h>
 #include <linux/jbd2.h>
 #include <linux/quota.h>
-#include "ext4_i.h"
+#include <linux/rwsem.h>
+#include <linux/rbtree.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/blockgroup_lock.h>
+#include <linux/percpu_counter.h>
 
 /*
  * The fourth extended filesystem constants/structures
@@ -46,6 +53,19 @@
 #define ext4_debug(f, a...)	do {} while (0)
 #endif
 
+/* data type for block offset of block group */
+typedef int ext4_grpblk_t;
+
+/* data type for filesystem-wide blocks number */
+typedef unsigned long long ext4_fsblk_t;
+
+/* data type for file logical block number */
+typedef __u32 ext4_lblk_t;
+
+/* data type for block group number */
+typedef unsigned int ext4_group_t;
+
+
 /* prefer goal again. length */
 #define EXT4_MB_HINT_MERGE		1
 /* blocks already reserved */
@@ -179,9 +199,6 @@ struct flex_groups {
 #define EXT4_BG_BLOCK_UNINIT	0x0002 /* Block bitmap not in use */
 #define EXT4_BG_INODE_ZEROED	0x0004 /* On-disk itable initialized to zero */
 
-#ifdef __KERNEL__
-#include "ext4_sb.h"
-#endif
 /*
  * Macro-instructions used to manage group descriptors
  */
@@ -297,10 +314,23 @@ struct ext4_new_group_data {
 };
 
 /*
- * Following is used by preallocation code to tell get_blocks() that we
- * want uninitialzed extents.
+ * Flags used by ext4_get_blocks()
  */
-#define EXT4_CREATE_UNINITIALIZED_EXT		2
+	/* Allocate any needed blocks and/or convert an unitialized
+	   extent to be an initialized ext4 */
+#define EXT4_GET_BLOCKS_CREATE			0x0001
+	/* Request the creation of an unitialized extent */
+#define EXT4_GET_BLOCKS_UNINIT_EXT		0x0002
+#define EXT4_GET_BLOCKS_CREATE_UNINIT_EXT	(EXT4_GET_BLOCKS_UNINIT_EXT|\
+						 EXT4_GET_BLOCKS_CREATE)
+	/* Caller is from the delayed allocation writeout path,
+	   so set the magic i_delalloc_reserve_flag after taking the 
+	   inode allocation semaphore for */
+#define EXT4_GET_BLOCKS_DELALLOC_RESERVE	0x0004
+	/* Call ext4_da_update_reserve_space() after successfully 
+	   allocating the blocks */
+#define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE	0x0008
+
 
 /*
  * ioctl commands
@@ -516,6 +546,110 @@ do {									       \
 #endif /* defined(__KERNEL__) || defined(__linux__) */
 
 /*
+ * storage for cached extent
+ */
+struct ext4_ext_cache {
+	ext4_fsblk_t	ec_start;
+	ext4_lblk_t	ec_block;
+	__u32		ec_len; /* must be 32bit to return holes */
+	__u32		ec_type;
+};
+
+/*
+ * fourth extended file system inode data in memory
+ */
+struct ext4_inode_info {
+	__le32	i_data[15];	/* unconverted */
+	__u32	i_flags;
+	ext4_fsblk_t	i_file_acl;
+	__u32	i_dtime;
+
+	/*
+	 * i_block_group is the number of the block group which contains
+	 * this file's inode.  Constant across the lifetime of the inode,
+	 * it is ued for making block allocation decisions - we try to
+	 * place a file's data blocks near its inode block, and new inodes
+	 * near to their parent directory's inode.
+	 */
+	ext4_group_t	i_block_group;
+	__u32	i_state;		/* Dynamic state flags for ext4 */
+
+	ext4_lblk_t		i_dir_start_lookup;
+#ifdef CONFIG_EXT4_FS_XATTR
+	/*
+	 * Extended attributes can be read independently of the main file
+	 * data. Taking i_mutex even when reading would cause contention
+	 * between readers of EAs and writers of regular file data, so
+	 * instead we synchronize on xattr_sem when reading or changing
+	 * EAs.
+	 */
+	struct rw_semaphore xattr_sem;
+#endif
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
+	struct list_head i_orphan;	/* unlinked but open inodes */
+
+	/*
+	 * i_disksize keeps track of what the inode size is ON DISK, not
+	 * in memory.  During truncate, i_size is set to the new size by
+	 * the VFS prior to calling ext4_truncate(), but the filesystem won't
+	 * set i_disksize to 0 until the truncate is actually under way.
+	 *
+	 * The intent is that i_disksize always represents the blocks which
+	 * are used by this file.  This allows recovery to restart truncate
+	 * on orphans if we crash during truncate.  We actually write i_disksize
+	 * into the on-disk inode when writing inodes out, instead of i_size.
+	 *
+	 * The only time when i_disksize and i_size may be different is when
+	 * a truncate is in progress.  The only things which change i_disksize
+	 * are ext4_get_block (growth) and ext4_truncate (shrinkth).
+	 */
+	loff_t	i_disksize;
+
+	/*
+	 * i_data_sem is for serialising ext4_truncate() against
+	 * ext4_getblock().  In the 2.4 ext2 design, great chunks of inode's
+	 * data tree are chopped off during truncate. We can't do that in
+	 * ext4 because whenever we perform intermediate commits during
+	 * truncate, the inode and all the metadata blocks *must* be in a
+	 * consistent state which allows truncation of the orphans to restart
+	 * during recovery.  Hence we must fix the get_block-vs-truncate race
+	 * by other means, so we have i_data_sem.
+	 */
+	struct rw_semaphore i_data_sem;
+	struct inode vfs_inode;
+	struct jbd2_inode jinode;
+
+	struct ext4_ext_cache i_cached_extent;
+	/*
+	 * File creation time. Its function is same as that of
+	 * struct timespec i_{a,c,m}time in the generic inode.
+	 */
+	struct timespec i_crtime;
+
+	/* mballoc */
+	struct list_head i_prealloc_list;
+	spinlock_t i_prealloc_lock;
+
+	/* ialloc */
+	ext4_group_t	i_last_alloc_group;
+
+	/* allocation reservation info for delalloc */
+	unsigned int i_reserved_data_blocks;
+	unsigned int i_reserved_meta_blocks;
+	unsigned int i_allocated_meta_blocks;
+	unsigned short i_delalloc_reserved_flag;
+
+	/* on-disk additional length */
+	__u16 i_extra_isize;
+
+	spinlock_t i_block_reservation_lock;
+};
+
+/*
  * File system states
  */
 #define	EXT4_VALID_FS			0x0001	/* Unmounted cleanly */
@@ -560,6 +694,7 @@ do {									       \
 #define EXT4_MOUNT_I_VERSION            0x2000000 /* i_version support */
 #define EXT4_MOUNT_DELALLOC		0x8000000 /* Delalloc support */
 #define EXT4_MOUNT_DATA_ERR_ABORT	0x10000000 /* Abort on file data write */
+#define EXT4_MOUNT_BLOCK_VALIDITY	0x20000000 /* Block validity checking */
 
 /* Compatibility, for having both ext2_fs.h and ext4_fs.h included at once */
 #ifndef _LINUX_EXT2_FS_H
@@ -689,6 +824,137 @@ struct ext4_super_block {
 };
 
 #ifdef __KERNEL__
+/*
+ * fourth extended-fs super-block data in memory
+ */
+struct ext4_sb_info {
+	unsigned long s_desc_size;	/* Size of a group descriptor in bytes */
+	unsigned long s_inodes_per_block;/* Number of inodes per block */
+	unsigned long s_blocks_per_group;/* Number of blocks in a group */
+	unsigned long s_inodes_per_group;/* Number of inodes in a group */
+	unsigned long s_itb_per_group;	/* Number of inode table blocks per group */
+	unsigned long s_gdb_count;	/* Number of group descriptor blocks */
+	unsigned long s_desc_per_block;	/* Number of group descriptors per block */
+	ext4_group_t s_groups_count;	/* Number of groups in the fs */
+	unsigned long s_overhead_last;  /* Last calculated overhead */
+	unsigned long s_blocks_last;    /* Last seen block count */
+	loff_t s_bitmap_maxbytes;	/* max bytes for bitmap files */
+	struct buffer_head * s_sbh;	/* Buffer containing the super block */
+	struct ext4_super_block *s_es;	/* Pointer to the super block in the buffer */
+	struct buffer_head **s_group_desc;
+	unsigned long  s_mount_opt;
+	ext4_fsblk_t s_sb_block;
+	uid_t s_resuid;
+	gid_t s_resgid;
+	unsigned short s_mount_state;
+	unsigned short s_pad;
+	int s_addr_per_block_bits;
+	int s_desc_per_block_bits;
+	int s_inode_size;
+	int s_first_ino;
+	unsigned int s_inode_readahead_blks;
+	spinlock_t s_next_gen_lock;
+	u32 s_next_generation;
+	u32 s_hash_seed[4];
+	int s_def_hash_version;
+	int s_hash_unsigned;	/* 3 if hash should be signed, 0 if not */
+	struct percpu_counter s_freeblocks_counter;
+	struct percpu_counter s_freeinodes_counter;
+	struct percpu_counter s_dirs_counter;
+	struct percpu_counter s_dirtyblocks_counter;
+	struct blockgroup_lock *s_blockgroup_lock;
+	struct proc_dir_entry *s_proc;
+	struct kobject s_kobj;
+	struct completion s_kobj_unregister;
+
+	/* Journaling */
+	struct inode *s_journal_inode;
+	struct journal_s *s_journal;
+	struct list_head s_orphan;
+	struct mutex s_orphan_lock;
+	struct mutex s_resize_lock;
+	unsigned long s_commit_interval;
+	u32 s_max_batch_time;
+	u32 s_min_batch_time;
+	struct block_device *journal_bdev;
+#ifdef CONFIG_JBD2_DEBUG
+	struct timer_list turn_ro_timer;	/* For turning read-only (crash simulation) */
+	wait_queue_head_t ro_wait_queue;	/* For people waiting for the fs to go read-only */
+#endif
+#ifdef CONFIG_QUOTA
+	char *s_qf_names[MAXQUOTAS];		/* Names of quota files with journalled quota */
+	int s_jquota_fmt;			/* Format of quota to use */
+#endif
+	unsigned int s_want_extra_isize; /* New inodes should reserve # bytes */
+	struct rb_root system_blks;
+
+#ifdef EXTENTS_STATS
+	/* ext4 extents stats */
+	unsigned long s_ext_min;
+	unsigned long s_ext_max;
+	unsigned long s_depth_max;
+	spinlock_t s_ext_stats_lock;
+	unsigned long s_ext_blocks;
+	unsigned long s_ext_extents;
+#endif
+
+	/* for buddy allocator */
+	struct ext4_group_info ***s_group_info;
+	struct inode *s_buddy_cache;
+	long s_blocks_reserved;
+	spinlock_t s_reserve_lock;
+	spinlock_t s_md_lock;
+	tid_t s_last_transaction;
+	unsigned short *s_mb_offsets;
+	unsigned int *s_mb_maxs;
+
+	/* tunables */
+	unsigned long s_stripe;
+	unsigned int s_mb_stream_request;
+	unsigned int s_mb_max_to_scan;
+	unsigned int s_mb_min_to_scan;
+	unsigned int s_mb_stats;
+	unsigned int s_mb_order2_reqs;
+	unsigned int s_mb_group_prealloc;
+	/* where last allocation was done - for stream allocation */
+	unsigned long s_mb_last_group;
+	unsigned long s_mb_last_start;
+
+	/* history to debug policy */
+	struct ext4_mb_history *s_mb_history;
+	int s_mb_history_cur;
+	int s_mb_history_max;
+	int s_mb_history_num;
+	spinlock_t s_mb_history_lock;
+	int s_mb_history_filter;
+
+	/* stats for buddy allocator */
+	spinlock_t s_mb_pa_lock;
+	atomic_t s_bal_reqs;	/* number of reqs with len > 1 */
+	atomic_t s_bal_success;	/* we found long enough chunks */
+	atomic_t s_bal_allocated;	/* in blocks */
+	atomic_t s_bal_ex_scanned;	/* total extents scanned */
+	atomic_t s_bal_goals;	/* goal hits */
+	atomic_t s_bal_breaks;	/* too long searches */
+	atomic_t s_bal_2orders;	/* 2^order hits */
+	spinlock_t s_bal_lock;
+	unsigned long s_mb_buddies_generated;
+	unsigned long long s_mb_generation_time;
+	atomic_t s_mb_lost_chunks;
+	atomic_t s_mb_preallocated;
+	atomic_t s_mb_discarded;
+
+	/* locality groups */
+	struct ext4_locality_group *s_locality_groups;
+
+	/* for write statistics */
+	unsigned long s_sectors_written_start;
+	u64 s_kbytes_written;
+
+	unsigned int s_log_groups_per_flex;
+	struct flex_groups *s_flex_groups;
+};
+
 static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
 {
 	return sb->s_fs_info;
@@ -704,7 +970,6 @@ static inline struct timespec ext4_current_time(struct inode *inode)
 		current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
 }
 
-
 static inline int ext4_valid_inum(struct super_block *sb, unsigned long ino)
 {
 	return ino == EXT4_ROOT_INO ||
@@ -1014,6 +1279,14 @@ extern struct ext4_group_desc * ext4_get_group_desc(struct super_block * sb,
 						    ext4_group_t block_group,
 						    struct buffer_head ** bh);
 extern int ext4_should_retry_alloc(struct super_block *sb, int *retries);
+struct buffer_head *ext4_read_block_bitmap(struct super_block *sb,
+				      ext4_group_t block_group);
+extern unsigned ext4_init_block_bitmap(struct super_block *sb,
+				       struct buffer_head *bh,
+				       ext4_group_t group,
+				       struct ext4_group_desc *desc);
+#define ext4_free_blocks_after_init(sb, group, desc)			\
+		ext4_init_block_bitmap(sb, NULL, group, desc)
 
 /* dir.c */
 extern int ext4_check_dir_entry(const char *, struct inode *,
@@ -1038,6 +1311,11 @@ extern struct inode * ext4_orphan_get(struct super_block *, unsigned long);
 extern unsigned long ext4_count_free_inodes(struct super_block *);
 extern unsigned long ext4_count_dirs(struct super_block *);
 extern void ext4_check_inodes_bitmap(struct super_block *);
+extern unsigned ext4_init_inode_bitmap(struct super_block *sb,
+				       struct buffer_head *bh,
+				       ext4_group_t group,
+				       struct ext4_group_desc *desc);
+extern void mark_bitmap_end(int start_bit, int end_bit, char *bitmap);
 
 /* mballoc.c */
 extern long ext4_mb_stats;
@@ -1123,6 +1401,8 @@ extern void ext4_abort(struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
 extern void ext4_warning(struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
+extern void ext4_msg(struct super_block *, const char *, const char *, ...)
+	__attribute__ ((format (printf, 3, 4)));
 extern void ext4_grp_locked_error(struct super_block *, ext4_group_t,
 				const char *, const char *, ...)
 	__attribute__ ((format (printf, 4, 5)));
@@ -1161,6 +1441,10 @@ extern void ext4_used_dirs_set(struct super_block *sb,
 				struct ext4_group_desc *bg, __u32 count);
 extern void ext4_itable_unused_set(struct super_block *sb,
 				   struct ext4_group_desc *bg, __u32 count);
+extern __le16 ext4_group_desc_csum(struct ext4_sb_info *sbi, __u32 group,
+				   struct ext4_group_desc *gdp);
+extern int ext4_group_desc_csum_verify(struct ext4_sb_info *sbi, __u32 group,
+				       struct ext4_group_desc *gdp);
 
 static inline ext4_fsblk_t ext4_blocks_count(struct ext4_super_block *es)
 {
@@ -1228,6 +1512,18 @@ struct ext4_group_info *ext4_get_group_info(struct super_block *sb,
 	 return grp_info[indexv][indexh];
 }
 
+/*
+ * Reading s_groups_count requires using smp_rmb() afterwards.  See
+ * the locking protocol documented in the comments of ext4_group_add()
+ * in resize.c
+ */
+static inline ext4_group_t ext4_get_groups_count(struct super_block *sb)
+{
+	ext4_group_t	ngroups = EXT4_SB(sb)->s_groups_count;
+
+	smp_rmb();
+	return ngroups;
+}
 
 static inline ext4_group_t ext4_flex_group(struct ext4_sb_info *sbi,
 					     ext4_group_t block_group)
@@ -1283,33 +1579,25 @@ struct ext4_group_info {
 };
 
 #define EXT4_GROUP_INFO_NEED_INIT_BIT	0
-#define EXT4_GROUP_INFO_LOCKED_BIT	1
 
 #define EXT4_MB_GRP_NEED_INIT(grp)	\
 	(test_bit(EXT4_GROUP_INFO_NEED_INIT_BIT, &((grp)->bb_state)))
 
-static inline void ext4_lock_group(struct super_block *sb, ext4_group_t group)
+static inline spinlock_t *ext4_group_lock_ptr(struct super_block *sb,
+					      ext4_group_t group)
 {
-	struct ext4_group_info *grinfo = ext4_get_group_info(sb, group);
-
-	bit_spin_lock(EXT4_GROUP_INFO_LOCKED_BIT, &(grinfo->bb_state));
+	return bgl_lock_ptr(EXT4_SB(sb)->s_blockgroup_lock, group);
 }
 
-static inline void ext4_unlock_group(struct super_block *sb,
-					ext4_group_t group)
+static inline void ext4_lock_group(struct super_block *sb, ext4_group_t group)
 {
-	struct ext4_group_info *grinfo = ext4_get_group_info(sb, group);
-
-	bit_spin_unlock(EXT4_GROUP_INFO_LOCKED_BIT, &(grinfo->bb_state));
+	spin_lock(ext4_group_lock_ptr(sb, group));
 }
 
-static inline int ext4_is_group_locked(struct super_block *sb,
+static inline void ext4_unlock_group(struct super_block *sb,
 					ext4_group_t group)
 {
-	struct ext4_group_info *grinfo = ext4_get_group_info(sb, group);
-
-	return bit_spin_is_locked(EXT4_GROUP_INFO_LOCKED_BIT,
-						&(grinfo->bb_state));
+	spin_unlock(ext4_group_lock_ptr(sb, group));
 }
 
 /*
@@ -1326,11 +1614,21 @@ extern const struct file_operations ext4_file_operations;
 /* namei.c */
 extern const struct inode_operations ext4_dir_inode_operations;
 extern const struct inode_operations ext4_special_inode_operations;
+extern struct dentry *ext4_get_parent(struct dentry *child);
 
 /* symlink.c */
 extern const struct inode_operations ext4_symlink_inode_operations;
 extern const struct inode_operations ext4_fast_symlink_inode_operations;
 
+/* block_validity */
+extern void ext4_release_system_zone(struct super_block *sb);
+extern int ext4_setup_system_zone(struct super_block *sb);
+extern int __init init_ext4_system_zone(void);
+extern void exit_ext4_system_zone(void);
+extern int ext4_data_block_valid(struct ext4_sb_info *sbi,
+				 ext4_fsblk_t start_blk,
+				 unsigned int count);
+
 /* extents.c */
 extern int ext4_ext_tree_init(handle_t *handle, struct inode *);
 extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
@@ -1338,17 +1636,15 @@ extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
 				       int chunk);
 extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 			       ext4_lblk_t iblock, unsigned int max_blocks,
-			       struct buffer_head *bh_result,
-			       int create, int extend_disksize);
+			       struct buffer_head *bh_result, int flags);
 extern void ext4_ext_truncate(struct inode *);
 extern void ext4_ext_init(struct super_block *);
 extern void ext4_ext_release(struct super_block *);
 extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset,
 			  loff_t len);
-extern int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode,
-			sector_t block, unsigned int max_blocks,
-			struct buffer_head *bh, int create,
-			int extend_disksize, int flag);
+extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
+			   sector_t block, unsigned int max_blocks,
+			   struct buffer_head *bh, int flags);
 extern int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			__u64 start, __u64 len);
 
diff --git a/fs/ext4/ext4_i.h b/fs/ext4/ext4_i.h
deleted file mode 100644
index 4ce2187123a..00000000000
--- a/fs/ext4/ext4_i.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  ext4_i.h
- *
- * Copyright (C) 1992, 1993, 1994, 1995
- * Remy Card (card@masi.ibp.fr)
- * Laboratoire MASI - Institut Blaise Pascal
- * Universite Pierre et Marie Curie (Paris VI)
- *
- *  from
- *
- *  linux/include/linux/minix_fs_i.h
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-#ifndef _EXT4_I
-#define _EXT4_I
-
-#include <linux/rwsem.h>
-#include <linux/rbtree.h>
-#include <linux/seqlock.h>
-#include <linux/mutex.h>
-
-/* data type for block offset of block group */
-typedef int ext4_grpblk_t;
-
-/* data type for filesystem-wide blocks number */
-typedef unsigned long long ext4_fsblk_t;
-
-/* data type for file logical block number */
-typedef __u32 ext4_lblk_t;
-
-/* data type for block group number */
-typedef unsigned int ext4_group_t;
-
-/*
- * storage for cached extent
- */
-struct ext4_ext_cache {
-	ext4_fsblk_t	ec_start;
-	ext4_lblk_t	ec_block;
-	__u32		ec_len; /* must be 32bit to return holes */
-	__u32		ec_type;
-};
-
-/*
- * fourth extended file system inode data in memory
- */
-struct ext4_inode_info {
-	__le32	i_data[15];	/* unconverted */
-	__u32	i_flags;
-	ext4_fsblk_t	i_file_acl;
-	__u32	i_dtime;
-
-	/*
-	 * i_block_group is the number of the block group which contains
-	 * this file's inode.  Constant across the lifetime of the inode,
-	 * it is ued for making block allocation decisions - we try to
-	 * place a file's data blocks near its inode block, and new inodes
-	 * near to their parent directory's inode.
-	 */
-	ext4_group_t	i_block_group;
-	__u32	i_state;		/* Dynamic state flags for ext4 */
-
-	ext4_lblk_t		i_dir_start_lookup;
-#ifdef CONFIG_EXT4_FS_XATTR
-	/*
-	 * Extended attributes can be read independently of the main file
-	 * data. Taking i_mutex even when reading would cause contention
-	 * between readers of EAs and writers of regular file data, so
-	 * instead we synchronize on xattr_sem when reading or changing
-	 * EAs.
-	 */
-	struct rw_semaphore xattr_sem;
-#endif
-#ifdef CONFIG_EXT4_FS_POSIX_ACL
-	struct posix_acl	*i_acl;
-	struct posix_acl	*i_default_acl;
-#endif
-
-	struct list_head i_orphan;	/* unlinked but open inodes */
-
-	/*
-	 * i_disksize keeps track of what the inode size is ON DISK, not
-	 * in memory.  During truncate, i_size is set to the new size by
-	 * the VFS prior to calling ext4_truncate(), but the filesystem won't
-	 * set i_disksize to 0 until the truncate is actually under way.
-	 *
-	 * The intent is that i_disksize always represents the blocks which
-	 * are used by this file.  This allows recovery to restart truncate
-	 * on orphans if we crash during truncate.  We actually write i_disksize
-	 * into the on-disk inode when writing inodes out, instead of i_size.
-	 *
-	 * The only time when i_disksize and i_size may be different is when
-	 * a truncate is in progress.  The only things which change i_disksize
-	 * are ext4_get_block (growth) and ext4_truncate (shrinkth).
-	 */
-	loff_t	i_disksize;
-
-	/*
-	 * i_data_sem is for serialising ext4_truncate() against
-	 * ext4_getblock().  In the 2.4 ext2 design, great chunks of inode's
-	 * data tree are chopped off during truncate. We can't do that in
-	 * ext4 because whenever we perform intermediate commits during
-	 * truncate, the inode and all the metadata blocks *must* be in a
-	 * consistent state which allows truncation of the orphans to restart
-	 * during recovery.  Hence we must fix the get_block-vs-truncate race
-	 * by other means, so we have i_data_sem.
-	 */
-	struct rw_semaphore i_data_sem;
-	struct inode vfs_inode;
-	struct jbd2_inode jinode;
-
-	struct ext4_ext_cache i_cached_extent;
-	/*
-	 * File creation time. Its function is same as that of
-	 * struct timespec i_{a,c,m}time in the generic inode.
-	 */
-	struct timespec i_crtime;
-
-	/* mballoc */
-	struct list_head i_prealloc_list;
-	spinlock_t i_prealloc_lock;
-
-	/* ialloc */
-	ext4_group_t	i_last_alloc_group;
-
-	/* allocation reservation info for delalloc */
-	unsigned int i_reserved_data_blocks;
-	unsigned int i_reserved_meta_blocks;
-	unsigned int i_allocated_meta_blocks;
-	unsigned short i_delalloc_reserved_flag;
-
-	/* on-disk additional length */
-	__u16 i_extra_isize;
-
-	spinlock_t i_block_reservation_lock;
-};
-
-#endif	/* _EXT4_I */
diff --git a/fs/ext4/ext4_sb.h b/fs/ext4/ext4_sb.h
deleted file mode 100644
index 57b71fefbcc..00000000000
--- a/fs/ext4/ext4_sb.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  ext4_sb.h
- *
- * Copyright (C) 1992, 1993, 1994, 1995
- * Remy Card (card@masi.ibp.fr)
- * Laboratoire MASI - Institut Blaise Pascal
- * Universite Pierre et Marie Curie (Paris VI)
- *
- *  from
- *
- *  linux/include/linux/minix_fs_sb.h
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-#ifndef _EXT4_SB
-#define _EXT4_SB
-
-#ifdef __KERNEL__
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/blockgroup_lock.h>
-#include <linux/percpu_counter.h>
-#endif
-#include <linux/rbtree.h>
-
-/*
- * fourth extended-fs super-block data in memory
- */
-struct ext4_sb_info {
-	unsigned long s_desc_size;	/* Size of a group descriptor in bytes */
-	unsigned long s_inodes_per_block;/* Number of inodes per block */
-	unsigned long s_blocks_per_group;/* Number of blocks in a group */
-	unsigned long s_inodes_per_group;/* Number of inodes in a group */
-	unsigned long s_itb_per_group;	/* Number of inode table blocks per group */
-	unsigned long s_gdb_count;	/* Number of group descriptor blocks */
-	unsigned long s_desc_per_block;	/* Number of group descriptors per block */
-	ext4_group_t s_groups_count;	/* Number of groups in the fs */
-	unsigned long s_overhead_last;  /* Last calculated overhead */
-	unsigned long s_blocks_last;    /* Last seen block count */
-	loff_t s_bitmap_maxbytes;	/* max bytes for bitmap files */
-	struct buffer_head * s_sbh;	/* Buffer containing the super block */
-	struct ext4_super_block *s_es;	/* Pointer to the super block in the buffer */
-	struct buffer_head **s_group_desc;
-	unsigned long  s_mount_opt;
-	ext4_fsblk_t s_sb_block;
-	uid_t s_resuid;
-	gid_t s_resgid;
-	unsigned short s_mount_state;
-	unsigned short s_pad;
-	int s_addr_per_block_bits;
-	int s_desc_per_block_bits;
-	int s_inode_size;
-	int s_first_ino;
-	unsigned int s_inode_readahead_blks;
-	spinlock_t s_next_gen_lock;
-	u32 s_next_generation;
-	u32 s_hash_seed[4];
-	int s_def_hash_version;
-	int s_hash_unsigned;	/* 3 if hash should be signed, 0 if not */
-	struct percpu_counter s_freeblocks_counter;
-	struct percpu_counter s_freeinodes_counter;
-	struct percpu_counter s_dirs_counter;
-	struct percpu_counter s_dirtyblocks_counter;
-	struct blockgroup_lock *s_blockgroup_lock;
-	struct proc_dir_entry *s_proc;
-	struct kobject s_kobj;
-	struct completion s_kobj_unregister;
-
-	/* Journaling */
-	struct inode *s_journal_inode;
-	struct journal_s *s_journal;
-	struct list_head s_orphan;
-	unsigned long s_commit_interval;
-	u32 s_max_batch_time;
-	u32 s_min_batch_time;
-	struct block_device *journal_bdev;
-#ifdef CONFIG_JBD2_DEBUG
-	struct timer_list turn_ro_timer;	/* For turning read-only (crash simulation) */
-	wait_queue_head_t ro_wait_queue;	/* For people waiting for the fs to go read-only */
-#endif
-#ifdef CONFIG_QUOTA
-	char *s_qf_names[MAXQUOTAS];		/* Names of quota files with journalled quota */
-	int s_jquota_fmt;			/* Format of quota to use */
-#endif
-	unsigned int s_want_extra_isize; /* New inodes should reserve # bytes */
-
-#ifdef EXTENTS_STATS
-	/* ext4 extents stats */
-	unsigned long s_ext_min;
-	unsigned long s_ext_max;
-	unsigned long s_depth_max;
-	spinlock_t s_ext_stats_lock;
-	unsigned long s_ext_blocks;
-	unsigned long s_ext_extents;
-#endif
-
-	/* for buddy allocator */
-	struct ext4_group_info ***s_group_info;
-	struct inode *s_buddy_cache;
-	long s_blocks_reserved;
-	spinlock_t s_reserve_lock;
-	spinlock_t s_md_lock;
-	tid_t s_last_transaction;
-	unsigned short *s_mb_offsets;
-	unsigned int *s_mb_maxs;
-
-	/* tunables */
-	unsigned long s_stripe;
-	unsigned int s_mb_stream_request;
-	unsigned int s_mb_max_to_scan;
-	unsigned int s_mb_min_to_scan;
-	unsigned int s_mb_stats;
-	unsigned int s_mb_order2_reqs;
-	unsigned int s_mb_group_prealloc;
-	/* where last allocation was done - for stream allocation */
-	unsigned long s_mb_last_group;
-	unsigned long s_mb_last_start;
-
-	/* history to debug policy */
-	struct ext4_mb_history *s_mb_history;
-	int s_mb_history_cur;
-	int s_mb_history_max;
-	int s_mb_history_num;
-	spinlock_t s_mb_history_lock;
-	int s_mb_history_filter;
-
-	/* stats for buddy allocator */
-	spinlock_t s_mb_pa_lock;
-	atomic_t s_bal_reqs;	/* number of reqs with len > 1 */
-	atomic_t s_bal_success;	/* we found long enough chunks */
-	atomic_t s_bal_allocated;	/* in blocks */
-	atomic_t s_bal_ex_scanned;	/* total extents scanned */
-	atomic_t s_bal_goals;	/* goal hits */
-	atomic_t s_bal_breaks;	/* too long searches */
-	atomic_t s_bal_2orders;	/* 2^order hits */
-	spinlock_t s_bal_lock;
-	unsigned long s_mb_buddies_generated;
-	unsigned long long s_mb_generation_time;
-	atomic_t s_mb_lost_chunks;
-	atomic_t s_mb_preallocated;
-	atomic_t s_mb_discarded;
-
-	/* locality groups */
-	struct ext4_locality_group *s_locality_groups;
-
-	/* for write statistics */
-	unsigned long s_sectors_written_start;
-	u64 s_kbytes_written;
-
-	unsigned int s_log_groups_per_flex;
-	struct flex_groups *s_flex_groups;
-};
-
-static inline spinlock_t *
-sb_bgl_lock(struct ext4_sb_info *sbi, unsigned int block_group)
-{
-	return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group);
-}
-
-#endif	/* _EXT4_SB */
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e4033215834..2593f748c3a 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -326,32 +326,18 @@ ext4_ext_max_entries(struct inode *inode, int depth)
 
 static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
 {
-	ext4_fsblk_t block = ext_pblock(ext), valid_block;
+	ext4_fsblk_t block = ext_pblock(ext);
 	int len = ext4_ext_get_actual_len(ext);
-	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
 
-	valid_block = le32_to_cpu(es->s_first_data_block) +
-		EXT4_SB(inode->i_sb)->s_gdb_count;
-	if (unlikely(block <= valid_block ||
-		     ((block + len) > ext4_blocks_count(es))))
-		return 0;
-	else
-		return 1;
+	return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, len);
 }
 
 static int ext4_valid_extent_idx(struct inode *inode,
 				struct ext4_extent_idx *ext_idx)
 {
-	ext4_fsblk_t block = idx_pblock(ext_idx), valid_block;
-	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
+	ext4_fsblk_t block = idx_pblock(ext_idx);
 
-	valid_block = le32_to_cpu(es->s_first_data_block) +
-		EXT4_SB(inode->i_sb)->s_gdb_count;
-	if (unlikely(block <= valid_block ||
-		     (block >= ext4_blocks_count(es))))
-		return 0;
-	else
-		return 1;
+	return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, 1);
 }
 
 static int ext4_valid_extent_entries(struct inode *inode,
@@ -1841,11 +1827,13 @@ ext4_ext_put_in_cache(struct inode *inode, ext4_lblk_t block,
 {
 	struct ext4_ext_cache *cex;
 	BUG_ON(len == 0);
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
 	cex = &EXT4_I(inode)->i_cached_extent;
 	cex->ec_type = type;
 	cex->ec_block = block;
 	cex->ec_len = len;
 	cex->ec_start = start;
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 }
 
 /*
@@ -1902,12 +1890,17 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
 			struct ext4_extent *ex)
 {
 	struct ext4_ext_cache *cex;
+	int ret = EXT4_EXT_CACHE_NO;
 
+	/* 
+	 * We borrow i_block_reservation_lock to protect i_cached_extent
+	 */
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
 	cex = &EXT4_I(inode)->i_cached_extent;
 
 	/* has cache valid data? */
 	if (cex->ec_type == EXT4_EXT_CACHE_NO)
-		return EXT4_EXT_CACHE_NO;
+		goto errout;
 
 	BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP &&
 			cex->ec_type != EXT4_EXT_CACHE_EXTENT);
@@ -1918,11 +1911,11 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
 		ext_debug("%u cached by %u:%u:%llu\n",
 				block,
 				cex->ec_block, cex->ec_len, cex->ec_start);
-		return cex->ec_type;
+		ret = cex->ec_type;
 	}
-
-	/* not in cache */
-	return EXT4_EXT_CACHE_NO;
+errout:
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+	return ret;
 }
 
 /*
@@ -2090,12 +2083,16 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 	ex = EXT_LAST_EXTENT(eh);
 
 	ex_ee_block = le32_to_cpu(ex->ee_block);
-	if (ext4_ext_is_uninitialized(ex))
-		uninitialized = 1;
 	ex_ee_len = ext4_ext_get_actual_len(ex);
 
 	while (ex >= EXT_FIRST_EXTENT(eh) &&
 			ex_ee_block + ex_ee_len > start) {
+
+		if (ext4_ext_is_uninitialized(ex))
+			uninitialized = 1;
+		else
+			uninitialized = 0;
+
 		ext_debug("remove ext %lu:%u\n", ex_ee_block, ex_ee_len);
 		path[depth].p_ext = ex;
 
@@ -2777,7 +2774,7 @@ fix_extent_len:
 int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 			ext4_lblk_t iblock,
 			unsigned int max_blocks, struct buffer_head *bh_result,
-			int create, int extend_disksize)
+			int flags)
 {
 	struct ext4_ext_path *path = NULL;
 	struct ext4_extent_header *eh;
@@ -2786,7 +2783,6 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	int err = 0, depth, ret, cache_type;
 	unsigned int allocated = 0;
 	struct ext4_allocation_request ar;
-	loff_t disksize;
 
 	__clear_bit(BH_New, &bh_result->b_state);
 	ext_debug("blocks %u/%u requested for inode %u\n",
@@ -2796,7 +2792,7 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	cache_type = ext4_ext_in_cache(inode, iblock, &newex);
 	if (cache_type) {
 		if (cache_type == EXT4_EXT_CACHE_GAP) {
-			if (!create) {
+			if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
 				/*
 				 * block isn't allocated yet and
 				 * user doesn't want to allocate it
@@ -2862,9 +2858,11 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 							EXT4_EXT_CACHE_EXTENT);
 				goto out;
 			}
-			if (create == EXT4_CREATE_UNINITIALIZED_EXT)
+			if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
 				goto out;
-			if (!create) {
+			if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
+				if (allocated > max_blocks)
+					allocated = max_blocks;
 				/*
 				 * We have blocks reserved already.  We
 				 * return allocated blocks so that delalloc
@@ -2872,9 +2870,9 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 				 * the buffer head will be unmapped so that
 				 * a read from the block returns 0s.
 				 */
-				if (allocated > max_blocks)
-					allocated = max_blocks;
 				set_buffer_unwritten(bh_result);
+				bh_result->b_bdev = inode->i_sb->s_bdev;
+				bh_result->b_blocknr = newblock;
 				goto out2;
 			}
 
@@ -2894,7 +2892,7 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	 * requested block isn't allocated yet;
 	 * we couldn't try to create block if create flag is zero
 	 */
-	if (!create) {
+	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
 		/*
 		 * put just found gap into cache to speed up
 		 * subsequent requests
@@ -2923,10 +2921,10 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	 * EXT_UNINIT_MAX_LEN.
 	 */
 	if (max_blocks > EXT_INIT_MAX_LEN &&
-	    create != EXT4_CREATE_UNINITIALIZED_EXT)
+	    !(flags & EXT4_GET_BLOCKS_UNINIT_EXT))
 		max_blocks = EXT_INIT_MAX_LEN;
 	else if (max_blocks > EXT_UNINIT_MAX_LEN &&
-		 create == EXT4_CREATE_UNINITIALIZED_EXT)
+		 (flags & EXT4_GET_BLOCKS_UNINIT_EXT))
 		max_blocks = EXT_UNINIT_MAX_LEN;
 
 	/* Check if we can really insert (iblock)::(iblock+max_blocks) extent */
@@ -2957,7 +2955,7 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	/* try to insert new extent into found leaf and return */
 	ext4_ext_store_pblock(&newex, newblock);
 	newex.ee_len = cpu_to_le16(ar.len);
-	if (create == EXT4_CREATE_UNINITIALIZED_EXT)  /* Mark uninitialized */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)  /* Mark uninitialized */
 		ext4_ext_mark_uninitialized(&newex);
 	err = ext4_ext_insert_extent(handle, inode, path, &newex);
 	if (err) {
@@ -2974,18 +2972,10 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 	newblock = ext_pblock(&newex);
 	allocated = ext4_ext_get_actual_len(&newex);
 outnew:
-	if (extend_disksize) {
-		disksize = ((loff_t) iblock + ar.len) << inode->i_blkbits;
-		if (disksize > i_size_read(inode))
-			disksize = i_size_read(inode);
-		if (disksize > EXT4_I(inode)->i_disksize)
-			EXT4_I(inode)->i_disksize = disksize;
-	}
-
 	set_buffer_new(bh_result);
 
 	/* Cache only when it is _not_ an uninitialized extent */
-	if (create != EXT4_CREATE_UNINITIALIZED_EXT)
+	if ((flags & EXT4_GET_BLOCKS_UNINIT_EXT) == 0)
 		ext4_ext_put_in_cache(inode, iblock, allocated, newblock,
 						EXT4_EXT_CACHE_EXTENT);
 out:
@@ -3141,9 +3131,10 @@ retry:
 			ret = PTR_ERR(handle);
 			break;
 		}
-		ret = ext4_get_blocks_wrap(handle, inode, block,
-					  max_blocks, &map_bh,
-					  EXT4_CREATE_UNINITIALIZED_EXT, 0, 0);
+		map_bh.b_state = 0;
+		ret = ext4_get_blocks(handle, inode, block,
+				      max_blocks, &map_bh,
+				      EXT4_GET_BLOCKS_CREATE_UNINIT_EXT);
 		if (ret <= 0) {
 #ifdef EXT4FS_DEBUG
 			WARN_ON(ret <= 0);
@@ -3186,7 +3177,7 @@ static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path,
 		       void *data)
 {
 	struct fiemap_extent_info *fieinfo = data;
-	unsigned long blksize_bits = inode->i_sb->s_blocksize_bits;
+	unsigned char blksize_bits = inode->i_sb->s_blocksize_bits;
 	__u64	logical;
 	__u64	physical;
 	__u64	length;
@@ -3233,9 +3224,16 @@ static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path,
 	 *
 	 * XXX this might miss a single-block extent at EXT_MAX_BLOCK
 	 */
-	if (logical + length - 1 == EXT_MAX_BLOCK ||
-	    ext4_ext_next_allocated_block(path) == EXT_MAX_BLOCK)
+	if (ext4_ext_next_allocated_block(path) == EXT_MAX_BLOCK ||
+	    newex->ec_block + newex->ec_len - 1 == EXT_MAX_BLOCK) {
+		loff_t size = i_size_read(inode);
+		loff_t bs = EXT4_BLOCK_SIZE(inode->i_sb);
+
 		flags |= FIEMAP_EXTENT_LAST;
+		if ((flags & FIEMAP_EXTENT_DELALLOC) &&
+		    logical+length > size)
+			length = (size - logical + bs - 1) & ~(bs-1);
+	}
 
 	error = fiemap_fill_next_extent(fieinfo, logical, physical,
 					length, flags);
@@ -3309,10 +3307,10 @@ int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		 * Walk the extent tree gathering extent information.
 		 * ext4_ext_fiemap_cb will push extents back to user.
 		 */
-		down_write(&EXT4_I(inode)->i_data_sem);
+		down_read(&EXT4_I(inode)->i_data_sem);
 		error = ext4_ext_walk_space(inode, start_blk, len_blks,
 					  ext4_ext_fiemap_cb, fieinfo);
-		up_write(&EXT4_I(inode)->i_data_sem);
+		up_read(&EXT4_I(inode)->i_data_sem);
 	}
 
 	return error;
diff --git a/fs/ext4/group.h b/fs/ext4/group.h
deleted file mode 100644
index c2c0a8d06d0..00000000000
--- a/fs/ext4/group.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  linux/fs/ext4/group.h
- *
- * Copyright (C) 2007 Cluster File Systems, Inc
- *
- * Author: Andreas Dilger <adilger@clusterfs.com>
- */
-
-#ifndef _LINUX_EXT4_GROUP_H
-#define _LINUX_EXT4_GROUP_H
-
-extern __le16 ext4_group_desc_csum(struct ext4_sb_info *sbi, __u32 group,
-				   struct ext4_group_desc *gdp);
-extern int ext4_group_desc_csum_verify(struct ext4_sb_info *sbi, __u32 group,
-				       struct ext4_group_desc *gdp);
-struct buffer_head *ext4_read_block_bitmap(struct super_block *sb,
-				      ext4_group_t block_group);
-extern unsigned ext4_init_block_bitmap(struct super_block *sb,
-				       struct buffer_head *bh,
-				       ext4_group_t group,
-				       struct ext4_group_desc *desc);
-#define ext4_free_blocks_after_init(sb, group, desc)			\
-		ext4_init_block_bitmap(sb, NULL, group, desc)
-extern unsigned ext4_init_inode_bitmap(struct super_block *sb,
-				       struct buffer_head *bh,
-				       ext4_group_t group,
-				       struct ext4_group_desc *desc);
-extern void mark_bitmap_end(int start_bit, int end_bit, char *bitmap);
-#endif /* _LINUX_EXT4_GROUP_H */
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f18e0a08a6b..3743bd849bc 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -27,7 +27,6 @@
 #include "ext4_jbd2.h"
 #include "xattr.h"
 #include "acl.h"
-#include "group.h"
 
 /*
  * ialloc.c contains the inodes allocation and deallocation routines
@@ -123,16 +122,16 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
 		unlock_buffer(bh);
 		return bh;
 	}
-	spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	ext4_lock_group(sb, block_group);
 	if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
 		ext4_init_inode_bitmap(sb, bh, block_group, desc);
 		set_bitmap_uptodate(bh);
 		set_buffer_uptodate(bh);
-		spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+		ext4_unlock_group(sb, block_group);
 		unlock_buffer(bh);
 		return bh;
 	}
-	spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group));
+	ext4_unlock_group(sb, block_group);
 	if (buffer_uptodate(bh)) {
 		/*
 		 * if not uninit if bh is uptodate,
@@ -247,9 +246,8 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
 		goto error_return;
 
 	/* Ok, now we can actually update the inode bitmaps.. */
-	spin_lock(sb_bgl_lock(sbi, block_group));
-	cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
-	spin_unlock(sb_bgl_lock(sbi, block_group));
+	cleared = ext4_clear_bit_atomic(ext4_group_lock_ptr(sb, block_group),
+					bit, bitmap_bh->b_data);
 	if (!cleared)
 		ext4_error(sb, "ext4_free_inode",
 			   "bit already cleared for inode %lu", ino);
@@ -261,7 +259,7 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
 		if (fatal) goto error_return;
 
 		if (gdp) {
-			spin_lock(sb_bgl_lock(sbi, block_group));
+			ext4_lock_group(sb, block_group);
 			count = ext4_free_inodes_count(sb, gdp) + 1;
 			ext4_free_inodes_set(sb, gdp, count);
 			if (is_directory) {
@@ -277,7 +275,7 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
 			}
 			gdp->bg_checksum = ext4_group_desc_csum(sbi,
 							block_group, gdp);
-			spin_unlock(sb_bgl_lock(sbi, block_group));
+			ext4_unlock_group(sb, block_group);
 			percpu_counter_inc(&sbi->s_freeinodes_counter);
 			if (is_directory)
 				percpu_counter_dec(&sbi->s_dirs_counter);
@@ -316,7 +314,7 @@ error_return:
 static int find_group_dir(struct super_block *sb, struct inode *parent,
 				ext4_group_t *best_group)
 {
-	ext4_group_t ngroups = EXT4_SB(sb)->s_groups_count;
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	unsigned int freei, avefreei;
 	struct ext4_group_desc *desc, *best_desc = NULL;
 	ext4_group_t group;
@@ -349,11 +347,10 @@ static int find_group_flex(struct super_block *sb, struct inode *parent,
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_group_desc *desc;
-	struct buffer_head *bh;
 	struct flex_groups *flex_group = sbi->s_flex_groups;
 	ext4_group_t parent_group = EXT4_I(parent)->i_block_group;
 	ext4_group_t parent_fbg_group = ext4_flex_group(sbi, parent_group);
-	ext4_group_t ngroups = sbi->s_groups_count;
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	int flex_size = ext4_flex_bg_size(sbi);
 	ext4_group_t best_flex = parent_fbg_group;
 	int blocks_per_flex = sbi->s_blocks_per_group * flex_size;
@@ -362,7 +359,7 @@ static int find_group_flex(struct super_block *sb, struct inode *parent,
 	ext4_group_t n_fbg_groups;
 	ext4_group_t i;
 
-	n_fbg_groups = (sbi->s_groups_count + flex_size - 1) >>
+	n_fbg_groups = (ngroups + flex_size - 1) >>
 		sbi->s_log_groups_per_flex;
 
 find_close_to_parent:
@@ -404,7 +401,7 @@ find_close_to_parent:
 found_flexbg:
 	for (i = best_flex * flex_size; i < ngroups &&
 		     i < (best_flex + 1) * flex_size; i++) {
-		desc = ext4_get_group_desc(sb, i, &bh);
+		desc = ext4_get_group_desc(sb, i, NULL);
 		if (ext4_free_inodes_count(sb, desc)) {
 			*best_group = i;
 			goto out;
@@ -478,20 +475,21 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent,
 {
 	ext4_group_t parent_group = EXT4_I(parent)->i_block_group;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	ext4_group_t ngroups = sbi->s_groups_count;
+	ext4_group_t real_ngroups = ext4_get_groups_count(sb);
 	int inodes_per_group = EXT4_INODES_PER_GROUP(sb);
 	unsigned int freei, avefreei;
 	ext4_fsblk_t freeb, avefreeb;
 	unsigned int ndirs;
 	int max_dirs, min_inodes;
 	ext4_grpblk_t min_blocks;
-	ext4_group_t i, grp, g;
+	ext4_group_t i, grp, g, ngroups;
 	struct ext4_group_desc *desc;
 	struct orlov_stats stats;
 	int flex_size = ext4_flex_bg_size(sbi);
 
+	ngroups = real_ngroups;
 	if (flex_size > 1) {
-		ngroups = (ngroups + flex_size - 1) >>
+		ngroups = (real_ngroups + flex_size - 1) >>
 			sbi->s_log_groups_per_flex;
 		parent_group >>= sbi->s_log_groups_per_flex;
 	}
@@ -543,7 +541,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent,
 		 */
 		grp *= flex_size;
 		for (i = 0; i < flex_size; i++) {
-			if (grp+i >= sbi->s_groups_count)
+			if (grp+i >= real_ngroups)
 				break;
 			desc = ext4_get_group_desc(sb, grp+i, NULL);
 			if (desc && ext4_free_inodes_count(sb, desc)) {
@@ -583,7 +581,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent,
 	}
 
 fallback:
-	ngroups = sbi->s_groups_count;
+	ngroups = real_ngroups;
 	avefreei = freei / ngroups;
 fallback_retry:
 	parent_group = EXT4_I(parent)->i_block_group;
@@ -613,9 +611,8 @@ static int find_group_other(struct super_block *sb, struct inode *parent,
 			    ext4_group_t *group, int mode)
 {
 	ext4_group_t parent_group = EXT4_I(parent)->i_block_group;
-	ext4_group_t ngroups = EXT4_SB(sb)->s_groups_count;
+	ext4_group_t i, last, ngroups = ext4_get_groups_count(sb);
 	struct ext4_group_desc *desc;
-	ext4_group_t i, last;
 	int flex_size = ext4_flex_bg_size(EXT4_SB(sb));
 
 	/*
@@ -708,10 +705,10 @@ static int find_group_other(struct super_block *sb, struct inode *parent,
 
 /*
  * claim the inode from the inode bitmap. If the group
- * is uninit we need to take the groups's sb_bgl_lock
+ * is uninit we need to take the groups's ext4_group_lock
  * and clear the uninit flag. The inode bitmap update
  * and group desc uninit flag clear should be done
- * after holding sb_bgl_lock so that ext4_read_inode_bitmap
+ * after holding ext4_group_lock so that ext4_read_inode_bitmap
  * doesn't race with the ext4_claim_inode
  */
 static int ext4_claim_inode(struct super_block *sb,
@@ -722,7 +719,7 @@ static int ext4_claim_inode(struct super_block *sb,
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_group_desc *gdp = ext4_get_group_desc(sb, group, NULL);
 
-	spin_lock(sb_bgl_lock(sbi, group));
+	ext4_lock_group(sb, group);
 	if (ext4_set_bit(ino, inode_bitmap_bh->b_data)) {
 		/* not a free inode */
 		retval = 1;
@@ -731,7 +728,7 @@ static int ext4_claim_inode(struct super_block *sb,
 	ino++;
 	if ((group == 0 && ino < EXT4_FIRST_INO(sb)) ||
 			ino > EXT4_INODES_PER_GROUP(sb)) {
-		spin_unlock(sb_bgl_lock(sbi, group));
+		ext4_unlock_group(sb, group);
 		ext4_error(sb, __func__,
 			   "reserved inode or inode > inodes count - "
 			   "block_group = %u, inode=%lu", group,
@@ -780,7 +777,7 @@ static int ext4_claim_inode(struct super_block *sb,
 	}
 	gdp->bg_checksum = ext4_group_desc_csum(sbi, group, gdp);
 err_ret:
-	spin_unlock(sb_bgl_lock(sbi, group));
+	ext4_unlock_group(sb, group);
 	return retval;
 }
 
@@ -799,11 +796,10 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 	struct super_block *sb;
 	struct buffer_head *inode_bitmap_bh = NULL;
 	struct buffer_head *group_desc_bh;
-	ext4_group_t group = 0;
+	ext4_group_t ngroups, group = 0;
 	unsigned long ino = 0;
 	struct inode *inode;
 	struct ext4_group_desc *gdp = NULL;
-	struct ext4_super_block *es;
 	struct ext4_inode_info *ei;
 	struct ext4_sb_info *sbi;
 	int ret2, err = 0;
@@ -818,15 +814,14 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 		return ERR_PTR(-EPERM);
 
 	sb = dir->i_sb;
+	ngroups = ext4_get_groups_count(sb);
 	trace_mark(ext4_request_inode, "dev %s dir %lu mode %d", sb->s_id,
 		   dir->i_ino, mode);
 	inode = new_inode(sb);
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 	ei = EXT4_I(inode);
-
 	sbi = EXT4_SB(sb);
-	es = sbi->s_es;
 
 	if (sbi->s_log_groups_per_flex && test_opt(sb, OLDALLOC)) {
 		ret2 = find_group_flex(sb, dir, &group);
@@ -856,7 +851,7 @@ got_group:
 	if (ret2 == -1)
 		goto out;
 
-	for (i = 0; i < sbi->s_groups_count; i++) {
+	for (i = 0; i < ngroups; i++) {
 		err = -EIO;
 
 		gdp = ext4_get_group_desc(sb, group, &group_desc_bh);
@@ -917,7 +912,7 @@ repeat_in_this_group:
 		 * group descriptor metadata has not yet been updated.
 		 * So we just go onto the next blockgroup.
 		 */
-		if (++group == sbi->s_groups_count)
+		if (++group == ngroups)
 			group = 0;
 	}
 	err = -ENOSPC;
@@ -938,7 +933,7 @@ got:
 		}
 
 		free = 0;
-		spin_lock(sb_bgl_lock(sbi, group));
+		ext4_lock_group(sb, group);
 		/* recheck and clear flag under lock if we still need to */
 		if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 			free = ext4_free_blocks_after_init(sb, group, gdp);
@@ -947,7 +942,7 @@ got:
 			gdp->bg_checksum = ext4_group_desc_csum(sbi, group,
 								gdp);
 		}
-		spin_unlock(sb_bgl_lock(sbi, group));
+		ext4_unlock_group(sb, group);
 
 		/* Don't need to dirty bitmap block if we didn't change it */
 		if (free) {
@@ -1158,7 +1153,7 @@ unsigned long ext4_count_free_inodes(struct super_block *sb)
 {
 	unsigned long desc_count;
 	struct ext4_group_desc *gdp;
-	ext4_group_t i;
+	ext4_group_t i, ngroups = ext4_get_groups_count(sb);
 #ifdef EXT4FS_DEBUG
 	struct ext4_super_block *es;
 	unsigned long bitmap_count, x;
@@ -1168,7 +1163,7 @@ unsigned long ext4_count_free_inodes(struct super_block *sb)
 	desc_count = 0;
 	bitmap_count = 0;
 	gdp = NULL;
-	for (i = 0; i < EXT4_SB(sb)->s_groups_count; i++) {
+	for (i = 0; i < ngroups; i++) {
 		gdp = ext4_get_group_desc(sb, i, NULL);
 		if (!gdp)
 			continue;
@@ -1190,7 +1185,7 @@ unsigned long ext4_count_free_inodes(struct super_block *sb)
 	return desc_count;
 #else
 	desc_count = 0;
-	for (i = 0; i < EXT4_SB(sb)->s_groups_count; i++) {
+	for (i = 0; i < ngroups; i++) {
 		gdp = ext4_get_group_desc(sb, i, NULL);
 		if (!gdp)
 			continue;
@@ -1205,9 +1200,9 @@ unsigned long ext4_count_free_inodes(struct super_block *sb)
 unsigned long ext4_count_dirs(struct super_block * sb)
 {
 	unsigned long count = 0;
-	ext4_group_t i;
+	ext4_group_t i, ngroups = ext4_get_groups_count(sb);
 
-	for (i = 0; i < EXT4_SB(sb)->s_groups_count; i++) {
+	for (i = 0; i < ngroups; i++) {
 		struct ext4_group_desc *gdp = ext4_get_group_desc(sb, i, NULL);
 		if (!gdp)
 			continue;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index e91f978c7f1..875db944b22 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -372,20 +372,21 @@ static int ext4_block_to_path(struct inode *inode,
 }
 
 static int __ext4_check_blockref(const char *function, struct inode *inode,
-				 __le32 *p, unsigned int max) {
-
-	unsigned int maxblocks = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es);
+				 __le32 *p, unsigned int max)
+{
 	__le32 *bref = p;
+	unsigned int blk;
+
 	while (bref < p+max) {
-		if (unlikely(le32_to_cpu(*bref) >= maxblocks)) {
+		blk = le32_to_cpu(*bref++);
+		if (blk && 
+		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), 
+						    blk, 1))) {
 			ext4_error(inode->i_sb, function,
-				   "block reference %u >= max (%u) "
-				   "in inode #%lu, offset=%d",
-				   le32_to_cpu(*bref), maxblocks,
-				   inode->i_ino, (int)(bref-p));
+				   "invalid block reference %u "
+				   "in inode #%lu", blk, inode->i_ino);
  			return -EIO;
  		}
-		bref++;
  	}
  	return 0;
 }
@@ -892,6 +893,10 @@ err_out:
 }
 
 /*
+ * The ext4_ind_get_blocks() function handles non-extents inodes
+ * (i.e., using the traditional indirect/double-indirect i_blocks
+ * scheme) for ext4_get_blocks().
+ *
  * Allocation strategy is simple: if we have to allocate something, we will
  * have to go the whole way to leaf. So let's do it before attaching anything
  * to tree, set linkage between the newborn blocks, write them if sync is
@@ -909,15 +914,16 @@ err_out:
  * return = 0, if plain lookup failed.
  * return < 0, error case.
  *
- *
- * Need to be called with
- * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system block
- * (ie, create is zero). Otherwise down_write(&EXT4_I(inode)->i_data_sem)
+ * The ext4_ind_get_blocks() function should be called with
+ * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem
+ * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or
+ * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
+ * blocks.
  */
-static int ext4_get_blocks_handle(handle_t *handle, struct inode *inode,
+static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode,
 				  ext4_lblk_t iblock, unsigned int maxblocks,
 				  struct buffer_head *bh_result,
-				  int create, int extend_disksize)
+				  int flags)
 {
 	int err = -EIO;
 	ext4_lblk_t offsets[4];
@@ -927,14 +933,11 @@ static int ext4_get_blocks_handle(handle_t *handle, struct inode *inode,
 	int indirect_blks;
 	int blocks_to_boundary = 0;
 	int depth;
-	struct ext4_inode_info *ei = EXT4_I(inode);
 	int count = 0;
 	ext4_fsblk_t first_block = 0;
-	loff_t disksize;
-
 
 	J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL));
-	J_ASSERT(handle != NULL || create == 0);
+	J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0);
 	depth = ext4_block_to_path(inode, iblock, offsets,
 					&blocks_to_boundary);
 
@@ -963,7 +966,7 @@ static int ext4_get_blocks_handle(handle_t *handle, struct inode *inode,
 	}
 
 	/* Next simple case - plain lookup or failed read of indirect block */
-	if (!create || err == -EIO)
+	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO)
 		goto cleanup;
 
 	/*
@@ -997,19 +1000,7 @@ static int ext4_get_blocks_handle(handle_t *handle, struct inode *inode,
 	if (!err)
 		err = ext4_splice_branch(handle, inode, iblock,
 					partial, indirect_blks, count);
-	/*
-	 * i_disksize growing is protected by i_data_sem.  Don't forget to
-	 * protect it if you're about to implement concurrent
-	 * ext4_get_block() -bzzz
-	*/
-	if (!err && extend_disksize) {
-		disksize = ((loff_t) iblock + count) << inode->i_blkbits;
-		if (disksize > i_size_read(inode))
-			disksize = i_size_read(inode);
-		if (disksize > ei->i_disksize)
-			ei->i_disksize = disksize;
-	}
-	if (err)
+	else 
 		goto cleanup;
 
 	set_buffer_new(bh_result);
@@ -1120,8 +1111,23 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used)
 		ext4_discard_preallocations(inode);
 }
 
+static int check_block_validity(struct inode *inode, sector_t logical,
+				sector_t phys, int len)
+{
+	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), phys, len)) {
+		ext4_error(inode->i_sb, "check_block_validity",
+			   "inode #%lu logical block %llu mapped to %llu "
+			   "(size %d)", inode->i_ino,
+			   (unsigned long long) logical,
+			   (unsigned long long) phys, len);
+		WARN_ON(1);
+		return -EIO;
+	}
+	return 0;
+}
+
 /*
- * The ext4_get_blocks_wrap() function try to look up the requested blocks,
+ * The ext4_get_blocks() function tries to look up the requested blocks,
  * and returns if the blocks are already mapped.
  *
  * Otherwise it takes the write lock of the i_data_sem and allocate blocks
@@ -1129,7 +1135,7 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used)
  * mapped.
  *
  * If file type is extents based, it will call ext4_ext_get_blocks(),
- * Otherwise, call with ext4_get_blocks_handle() to handle indirect mapping
+ * Otherwise, call with ext4_ind_get_blocks() to handle indirect mapping
  * based files
  *
  * On success, it returns the number of blocks being mapped or allocate.
@@ -1142,30 +1148,38 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used)
  *
  * It returns the error in case of allocation failure.
  */
-int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
-			unsigned int max_blocks, struct buffer_head *bh,
-			int create, int extend_disksize, int flag)
+int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block,
+		    unsigned int max_blocks, struct buffer_head *bh,
+		    int flags)
 {
 	int retval;
 
 	clear_buffer_mapped(bh);
+	clear_buffer_unwritten(bh);
 
 	/*
-	 * Try to see if we can get  the block without requesting
-	 * for new file system block.
+	 * Try to see if we can get the block without requesting a new
+	 * file system block.
 	 */
 	down_read((&EXT4_I(inode)->i_data_sem));
 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) {
 		retval =  ext4_ext_get_blocks(handle, inode, block, max_blocks,
-				bh, 0, 0);
+				bh, 0);
 	} else {
-		retval = ext4_get_blocks_handle(handle,
-				inode, block, max_blocks, bh, 0, 0);
+		retval = ext4_ind_get_blocks(handle, inode, block, max_blocks,
+					     bh, 0);
 	}
 	up_read((&EXT4_I(inode)->i_data_sem));
 
+	if (retval > 0 && buffer_mapped(bh)) {
+		int ret = check_block_validity(inode, block, 
+					       bh->b_blocknr, retval);
+		if (ret != 0)
+			return ret;
+	}
+
 	/* If it is only a block(s) look up */
-	if (!create)
+	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0)
 		return retval;
 
 	/*
@@ -1179,6 +1193,18 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 		return retval;
 
 	/*
+	 * When we call get_blocks without the create flag, the
+	 * BH_Unwritten flag could have gotten set if the blocks
+	 * requested were part of a uninitialized extent.  We need to
+	 * clear this flag now that we are committed to convert all or
+	 * part of the uninitialized extent to be an initialized
+	 * extent.  This is because we need to avoid the combination
+	 * of BH_Unwritten and BH_Mapped flags being simultaneously
+	 * set on the buffer_head.
+	 */
+	clear_buffer_unwritten(bh);
+
+	/*
 	 * New blocks allocate and/or writing to uninitialized extent
 	 * will possibly result in updating i_data, so we take
 	 * the write lock of i_data_sem, and call get_blocks()
@@ -1192,7 +1218,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	 * let the underlying get_block() function know to
 	 * avoid double accounting
 	 */
-	if (flag)
+	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
 		EXT4_I(inode)->i_delalloc_reserved_flag = 1;
 	/*
 	 * We need to check for EXT4 here because migrate
@@ -1200,10 +1226,10 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	 */
 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) {
 		retval =  ext4_ext_get_blocks(handle, inode, block, max_blocks,
-				bh, create, extend_disksize);
+					      bh, flags);
 	} else {
-		retval = ext4_get_blocks_handle(handle, inode, block,
-				max_blocks, bh, create, extend_disksize);
+		retval = ext4_ind_get_blocks(handle, inode, block,
+					     max_blocks, bh, flags);
 
 		if (retval > 0 && buffer_new(bh)) {
 			/*
@@ -1216,18 +1242,23 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 		}
 	}
 
-	if (flag) {
+	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
 		EXT4_I(inode)->i_delalloc_reserved_flag = 0;
-		/*
-		 * Update reserved blocks/metadata blocks
-		 * after successful block allocation
-		 * which were deferred till now
-		 */
-		if ((retval > 0) && buffer_delay(bh))
-			ext4_da_update_reserve_space(inode, retval);
-	}
+
+	/*
+	 * Update reserved blocks/metadata blocks after successful
+	 * block allocation which had been deferred till now.
+	 */
+	if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE))
+		ext4_da_update_reserve_space(inode, retval);
 
 	up_write((&EXT4_I(inode)->i_data_sem));
+	if (retval > 0 && buffer_mapped(bh)) {
+		int ret = check_block_validity(inode, block, 
+					       bh->b_blocknr, retval);
+		if (ret != 0)
+			return ret;
+	}
 	return retval;
 }
 
@@ -1255,8 +1286,8 @@ int ext4_get_block(struct inode *inode, sector_t iblock,
 		started = 1;
 	}
 
-	ret = ext4_get_blocks_wrap(handle, inode, iblock,
-					max_blocks, bh_result, create, 0, 0);
+	ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
+			      create ? EXT4_GET_BLOCKS_CREATE : 0);
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
@@ -1275,17 +1306,19 @@ struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode,
 {
 	struct buffer_head dummy;
 	int fatal = 0, err;
+	int flags = 0;
 
 	J_ASSERT(handle != NULL || create == 0);
 
 	dummy.b_state = 0;
 	dummy.b_blocknr = -1000;
 	buffer_trace_init(&dummy.b_history);
-	err = ext4_get_blocks_wrap(handle, inode, block, 1,
-					&dummy, create, 1, 0);
+	if (create)
+		flags |= EXT4_GET_BLOCKS_CREATE;
+	err = ext4_get_blocks(handle, inode, block, 1, &dummy, flags);
 	/*
-	 * ext4_get_blocks_handle() returns number of blocks
-	 * mapped. 0 in case of a HOLE.
+	 * ext4_get_blocks() returns number of blocks mapped. 0 in
+	 * case of a HOLE.
 	 */
 	if (err > 0) {
 		if (err > 1)
@@ -1426,7 +1459,7 @@ static int ext4_write_begin(struct file *file, struct address_space *mapping,
 				struct page **pagep, void **fsdata)
 {
 	struct inode *inode = mapping->host;
-	int ret, needed_blocks = ext4_writepage_trans_blocks(inode);
+	int ret, needed_blocks;
 	handle_t *handle;
 	int retries = 0;
 	struct page *page;
@@ -1437,6 +1470,11 @@ static int ext4_write_begin(struct file *file, struct address_space *mapping,
 		   "dev %s ino %lu pos %llu len %u flags %u",
 		   inode->i_sb->s_id, inode->i_ino,
 		   (unsigned long long) pos, len, flags);
+	/*
+	 * Reserve one block more for addition to orphan list in case
+	 * we allocate blocks but write fails for some reason
+	 */
+	needed_blocks = ext4_writepage_trans_blocks(inode) + 1;
  	index = pos >> PAGE_CACHE_SHIFT;
 	from = pos & (PAGE_CACHE_SIZE - 1);
 	to = from + len;
@@ -1470,15 +1508,30 @@ retry:
 
 	if (ret) {
 		unlock_page(page);
-		ext4_journal_stop(handle);
 		page_cache_release(page);
 		/*
 		 * block_write_begin may have instantiated a few blocks
 		 * outside i_size.  Trim these off again. Don't need
 		 * i_size_read because we hold i_mutex.
+		 *
+		 * Add inode to orphan list in case we crash before
+		 * truncate finishes
 		 */
 		if (pos + len > inode->i_size)
+			ext4_orphan_add(handle, inode);
+
+		ext4_journal_stop(handle);
+		if (pos + len > inode->i_size) {
 			vmtruncate(inode, inode->i_size);
+			/* 
+			 * If vmtruncate failed early the inode might
+			 * still be on the orphan list; we need to
+			 * make sure the inode is removed from the
+			 * orphan list in that case.
+			 */
+			if (inode->i_nlink)
+				ext4_orphan_del(NULL, inode);
+		}
 	}
 
 	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -1496,6 +1549,52 @@ static int write_end_fn(handle_t *handle, struct buffer_head *bh)
 	return ext4_handle_dirty_metadata(handle, NULL, bh);
 }
 
+static int ext4_generic_write_end(struct file *file,
+				struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned copied,
+				struct page *page, void *fsdata)
+{
+	int i_size_changed = 0;
+	struct inode *inode = mapping->host;
+	handle_t *handle = ext4_journal_current_handle();
+
+	copied = block_write_end(file, mapping, pos, len, copied, page, fsdata);
+
+	/*
+	 * No need to use i_size_read() here, the i_size
+	 * cannot change under us because we hold i_mutex.
+	 *
+	 * But it's important to update i_size while still holding page lock:
+	 * page writeout could otherwise come in and zero beyond i_size.
+	 */
+	if (pos + copied > inode->i_size) {
+		i_size_write(inode, pos + copied);
+		i_size_changed = 1;
+	}
+
+	if (pos + copied >  EXT4_I(inode)->i_disksize) {
+		/* We need to mark inode dirty even if
+		 * new_i_size is less that inode->i_size
+		 * bu greater than i_disksize.(hint delalloc)
+		 */
+		ext4_update_i_disksize(inode, (pos + copied));
+		i_size_changed = 1;
+	}
+	unlock_page(page);
+	page_cache_release(page);
+
+	/*
+	 * Don't mark the inode dirty under page lock. First, it unnecessarily
+	 * makes the holding time of page lock longer. Second, it forces lock
+	 * ordering of page lock and transaction start for journaling
+	 * filesystems.
+	 */
+	if (i_size_changed)
+		ext4_mark_inode_dirty(handle, inode);
+
+	return copied;
+}
+
 /*
  * We need to pick up the new inode size which generic_commit_write gave us
  * `file' can be NULL - eg, when called from page_symlink().
@@ -1519,21 +1618,15 @@ static int ext4_ordered_write_end(struct file *file,
 	ret = ext4_jbd2_file_inode(handle, inode);
 
 	if (ret == 0) {
-		loff_t new_i_size;
-
-		new_i_size = pos + copied;
-		if (new_i_size > EXT4_I(inode)->i_disksize) {
-			ext4_update_i_disksize(inode, new_i_size);
-			/* We need to mark inode dirty even if
-			 * new_i_size is less that inode->i_size
-			 * bu greater than i_disksize.(hint delalloc)
-			 */
-			ext4_mark_inode_dirty(handle, inode);
-		}
-
-		ret2 = generic_write_end(file, mapping, pos, len, copied,
+		ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
 							page, fsdata);
 		copied = ret2;
+		if (pos + len > inode->i_size)
+			/* if we have allocated more blocks and copied
+			 * less. We will have blocks allocated outside
+			 * inode->i_size. So truncate them
+			 */
+			ext4_orphan_add(handle, inode);
 		if (ret2 < 0)
 			ret = ret2;
 	}
@@ -1541,6 +1634,18 @@ static int ext4_ordered_write_end(struct file *file,
 	if (!ret)
 		ret = ret2;
 
+	if (pos + len > inode->i_size) {
+		vmtruncate(inode, inode->i_size);
+		/* 
+		 * If vmtruncate failed early the inode might still be
+		 * on the orphan list; we need to make sure the inode
+		 * is removed from the orphan list in that case.
+		 */
+		if (inode->i_nlink)
+			ext4_orphan_del(NULL, inode);
+	}
+
+
 	return ret ? ret : copied;
 }
 
@@ -1552,25 +1657,21 @@ static int ext4_writeback_write_end(struct file *file,
 	handle_t *handle = ext4_journal_current_handle();
 	struct inode *inode = mapping->host;
 	int ret = 0, ret2;
-	loff_t new_i_size;
 
 	trace_mark(ext4_writeback_write_end,
 		   "dev %s ino %lu pos %llu len %u copied %u",
 		   inode->i_sb->s_id, inode->i_ino,
 		   (unsigned long long) pos, len, copied);
-	new_i_size = pos + copied;
-	if (new_i_size > EXT4_I(inode)->i_disksize) {
-		ext4_update_i_disksize(inode, new_i_size);
-		/* We need to mark inode dirty even if
-		 * new_i_size is less that inode->i_size
-		 * bu greater than i_disksize.(hint delalloc)
-		 */
-		ext4_mark_inode_dirty(handle, inode);
-	}
-
-	ret2 = generic_write_end(file, mapping, pos, len, copied,
+	ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
 							page, fsdata);
 	copied = ret2;
+	if (pos + len > inode->i_size)
+		/* if we have allocated more blocks and copied
+		 * less. We will have blocks allocated outside
+		 * inode->i_size. So truncate them
+		 */
+		ext4_orphan_add(handle, inode);
+
 	if (ret2 < 0)
 		ret = ret2;
 
@@ -1578,6 +1679,17 @@ static int ext4_writeback_write_end(struct file *file,
 	if (!ret)
 		ret = ret2;
 
+	if (pos + len > inode->i_size) {
+		vmtruncate(inode, inode->i_size);
+		/* 
+		 * If vmtruncate failed early the inode might still be
+		 * on the orphan list; we need to make sure the inode
+		 * is removed from the orphan list in that case.
+		 */
+		if (inode->i_nlink)
+			ext4_orphan_del(NULL, inode);
+	}
+
 	return ret ? ret : copied;
 }
 
@@ -1622,10 +1734,27 @@ static int ext4_journalled_write_end(struct file *file,
 	}
 
 	unlock_page(page);
+	page_cache_release(page);
+	if (pos + len > inode->i_size)
+		/* if we have allocated more blocks and copied
+		 * less. We will have blocks allocated outside
+		 * inode->i_size. So truncate them
+		 */
+		ext4_orphan_add(handle, inode);
+
 	ret2 = ext4_journal_stop(handle);
 	if (!ret)
 		ret = ret2;
-	page_cache_release(page);
+	if (pos + len > inode->i_size) {
+		vmtruncate(inode, inode->i_size);
+		/* 
+		 * If vmtruncate failed early the inode might still be
+		 * on the orphan list; we need to make sure the inode
+		 * is removed from the orphan list in that case.
+		 */
+		if (inode->i_nlink)
+			ext4_orphan_del(NULL, inode);
+	}
 
 	return ret ? ret : copied;
 }
@@ -1839,7 +1968,7 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
  * @logical - first logical block to start assignment with
  *
  * the function goes through all passed space and put actual disk
- * block numbers into buffer heads, dropping BH_Delay
+ * block numbers into buffer heads, dropping BH_Delay and BH_Unwritten
  */
 static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 				 struct buffer_head *exbh)
@@ -1889,16 +2018,24 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 			do {
 				if (cur_logical >= logical + blocks)
 					break;
-				if (buffer_delay(bh)) {
-					bh->b_blocknr = pblock;
-					clear_buffer_delay(bh);
-					bh->b_bdev = inode->i_sb->s_bdev;
-				} else if (buffer_unwritten(bh)) {
-					bh->b_blocknr = pblock;
-					clear_buffer_unwritten(bh);
-					set_buffer_mapped(bh);
-					set_buffer_new(bh);
-					bh->b_bdev = inode->i_sb->s_bdev;
+
+				if (buffer_delay(bh) ||
+						buffer_unwritten(bh)) {
+
+					BUG_ON(bh->b_bdev != inode->i_sb->s_bdev);
+
+					if (buffer_delay(bh)) {
+						clear_buffer_delay(bh);
+						bh->b_blocknr = pblock;
+					} else {
+						/*
+						 * unwritten already should have
+						 * blocknr assigned. Verify that
+						 */
+						clear_buffer_unwritten(bh);
+						BUG_ON(bh->b_blocknr != pblock);
+					}
+
 				} else if (buffer_mapped(bh))
 					BUG_ON(bh->b_blocknr != pblock);
 
@@ -1977,51 +2114,6 @@ static void ext4_print_free_blocks(struct inode *inode)
 	return;
 }
 
-#define		EXT4_DELALLOC_RSVED	1
-static int ext4_da_get_block_write(struct inode *inode, sector_t iblock,
-				   struct buffer_head *bh_result, int create)
-{
-	int ret;
-	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
-	loff_t disksize = EXT4_I(inode)->i_disksize;
-	handle_t *handle = NULL;
-
-	handle = ext4_journal_current_handle();
-	BUG_ON(!handle);
-	ret = ext4_get_blocks_wrap(handle, inode, iblock, max_blocks,
-				   bh_result, create, 0, EXT4_DELALLOC_RSVED);
-	if (ret <= 0)
-		return ret;
-
-	bh_result->b_size = (ret << inode->i_blkbits);
-
-	if (ext4_should_order_data(inode)) {
-		int retval;
-		retval = ext4_jbd2_file_inode(handle, inode);
-		if (retval)
-			/*
-			 * Failed to add inode for ordered mode. Don't
-			 * update file size
-			 */
-			return retval;
-	}
-
-	/*
-	 * Update on-disk size along with block allocation we don't
-	 * use 'extend_disksize' as size may change within already
-	 * allocated block -bzzz
-	 */
-	disksize = ((loff_t) iblock + ret) << inode->i_blkbits;
-	if (disksize > i_size_read(inode))
-		disksize = i_size_read(inode);
-	if (disksize > EXT4_I(inode)->i_disksize) {
-		ext4_update_i_disksize(inode, disksize);
-		ret = ext4_mark_inode_dirty(handle, inode);
-		return ret;
-	}
-	return 0;
-}
-
 /*
  * mpage_da_map_blocks - go through given space
  *
@@ -2032,29 +2124,57 @@ static int ext4_da_get_block_write(struct inode *inode, sector_t iblock,
  */
 static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 {
-	int err = 0;
+	int err, blks, get_blocks_flags;
 	struct buffer_head new;
-	sector_t next;
+	sector_t next = mpd->b_blocknr;
+	unsigned max_blocks = mpd->b_size >> mpd->inode->i_blkbits;
+	loff_t disksize = EXT4_I(mpd->inode)->i_disksize;
+	handle_t *handle = NULL;
 
 	/*
 	 * We consider only non-mapped and non-allocated blocks
 	 */
 	if ((mpd->b_state  & (1 << BH_Mapped)) &&
-	    !(mpd->b_state & (1 << BH_Delay)))
+		!(mpd->b_state & (1 << BH_Delay)) &&
+		!(mpd->b_state & (1 << BH_Unwritten)))
 		return 0;
-	new.b_state = mpd->b_state;
-	new.b_blocknr = 0;
-	new.b_size = mpd->b_size;
-	next = mpd->b_blocknr;
+
 	/*
-	 * If we didn't accumulate anything
-	 * to write simply return
+	 * If we didn't accumulate anything to write simply return
 	 */
-	if (!new.b_size)
+	if (!mpd->b_size)
 		return 0;
 
-	err = ext4_da_get_block_write(mpd->inode, next, &new, 1);
-	if (err) {
+	handle = ext4_journal_current_handle();
+	BUG_ON(!handle);
+
+	/*
+	 * Call ext4_get_blocks() to allocate any delayed allocation
+	 * blocks, or to convert an uninitialized extent to be
+	 * initialized (in the case where we have written into
+	 * one or more preallocated blocks).
+	 *
+	 * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE to
+	 * indicate that we are on the delayed allocation path.  This
+	 * affects functions in many different parts of the allocation
+	 * call path.  This flag exists primarily because we don't
+	 * want to change *many* call functions, so ext4_get_blocks()
+	 * will set the magic i_delalloc_reserved_flag once the
+	 * inode's allocation semaphore is taken.
+	 *
+	 * If the blocks in questions were delalloc blocks, set
+	 * EXT4_GET_BLOCKS_DELALLOC_RESERVE so the delalloc accounting
+	 * variables are updated after the blocks have been allocated.
+	 */
+	new.b_state = 0;
+	get_blocks_flags = (EXT4_GET_BLOCKS_CREATE |
+			    EXT4_GET_BLOCKS_DELALLOC_RESERVE);
+	if (mpd->b_state & (1 << BH_Delay))
+		get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE;
+	blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks,
+			       &new, get_blocks_flags);
+	if (blks < 0) {
+		err = blks;
 		/*
 		 * If get block returns with error we simply
 		 * return. Later writepage will redirty the page and
@@ -2087,12 +2207,14 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 		if (err == -ENOSPC) {
 			ext4_print_free_blocks(mpd->inode);
 		}
-		/* invlaidate all the pages */
+		/* invalidate all the pages */
 		ext4_da_block_invalidatepages(mpd, next,
 				mpd->b_size >> mpd->inode->i_blkbits);
 		return err;
 	}
-	BUG_ON(new.b_size == 0);
+	BUG_ON(blks == 0);
+
+	new.b_size = (blks << mpd->inode->i_blkbits);
 
 	if (buffer_new(&new))
 		__unmap_underlying_blocks(mpd->inode, &new);
@@ -2105,6 +2227,23 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 	    (mpd->b_state & (1 << BH_Unwritten)))
 		mpage_put_bnr_to_bhs(mpd, next, &new);
 
+	if (ext4_should_order_data(mpd->inode)) {
+		err = ext4_jbd2_file_inode(handle, mpd->inode);
+		if (err)
+			return err;
+	}
+
+	/*
+	 * Update on-disk size along with block allocation.
+	 */
+	disksize = ((loff_t) next + blks) << mpd->inode->i_blkbits;
+	if (disksize > i_size_read(mpd->inode))
+		disksize = i_size_read(mpd->inode);
+	if (disksize > EXT4_I(mpd->inode)->i_disksize) {
+		ext4_update_i_disksize(mpd->inode, disksize);
+		return ext4_mark_inode_dirty(handle, mpd->inode);
+	}
+
 	return 0;
 }
 
@@ -2179,6 +2318,17 @@ flush_it:
 	return;
 }
 
+static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh)
+{
+	/*
+	 * unmapped buffer is possible for holes.
+	 * delay buffer is possible with delayed allocation.
+	 * We also need to consider unwritten buffer as unmapped.
+	 */
+	return (!buffer_mapped(bh) || buffer_delay(bh) ||
+				buffer_unwritten(bh)) && buffer_dirty(bh);
+}
+
 /*
  * __mpage_da_writepage - finds extent of pages and blocks
  *
@@ -2263,8 +2413,7 @@ static int __mpage_da_writepage(struct page *page,
 			 * Otherwise we won't make progress
 			 * with the page in ext4_da_writepage
 			 */
-			if (buffer_dirty(bh) &&
-			    (!buffer_mapped(bh) || buffer_delay(bh))) {
+			if (ext4_bh_unmapped_or_delay(NULL, bh)) {
 				mpage_add_bh_to_extent(mpd, logical,
 						       bh->b_size,
 						       bh->b_state);
@@ -2290,13 +2439,25 @@ static int __mpage_da_writepage(struct page *page,
 }
 
 /*
- * this is a special callback for ->write_begin() only
- * it's intention is to return mapped block or reserve space
+ * This is a special get_blocks_t callback which is used by
+ * ext4_da_write_begin().  It will either return mapped block or
+ * reserve space for a single block.
+ *
+ * For delayed buffer_head we have BH_Mapped, BH_New, BH_Delay set.
+ * We also have b_blocknr = -1 and b_bdev initialized properly
+ *
+ * For unwritten buffer_head we have BH_Mapped, BH_New, BH_Unwritten set.
+ * We also have b_blocknr = physicalblock mapping unwritten extent and b_bdev
+ * initialized properly.
  */
 static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 				  struct buffer_head *bh_result, int create)
 {
 	int ret = 0;
+	sector_t invalid_block = ~((sector_t) 0xffff);
+
+	if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+		invalid_block = ~0;
 
 	BUG_ON(create == 0);
 	BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
@@ -2306,7 +2467,7 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 	 * preallocated blocks are unmapped but should treated
 	 * the same as allocated blocks.
 	 */
-	ret = ext4_get_blocks_wrap(NULL, inode, iblock, 1,  bh_result, 0, 0, 0);
+	ret = ext4_get_blocks(NULL, inode, iblock, 1,  bh_result, 0);
 	if ((ret == 0) && !buffer_delay(bh_result)) {
 		/* the block isn't (pre)allocated yet, let's reserve space */
 		/*
@@ -2318,38 +2479,58 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 			/* not enough space to reserve */
 			return ret;
 
-		map_bh(bh_result, inode->i_sb, 0);
+		map_bh(bh_result, inode->i_sb, invalid_block);
 		set_buffer_new(bh_result);
 		set_buffer_delay(bh_result);
 	} else if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
+		if (buffer_unwritten(bh_result)) {
+			/* A delayed write to unwritten bh should
+			 * be marked new and mapped.  Mapped ensures
+			 * that we don't do get_block multiple times
+			 * when we write to the same offset and new
+			 * ensures that we do proper zero out for
+			 * partial write.
+			 */
+			set_buffer_new(bh_result);
+			set_buffer_mapped(bh_result);
+		}
 		ret = 0;
 	}
 
 	return ret;
 }
 
-static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh)
-{
-	/*
-	 * unmapped buffer is possible for holes.
-	 * delay buffer is possible with delayed allocation
-	 */
-	return ((!buffer_mapped(bh) || buffer_delay(bh)) && buffer_dirty(bh));
-}
-
-static int ext4_normal_get_block_write(struct inode *inode, sector_t iblock,
+/*
+ * This function is used as a standard get_block_t calback function
+ * when there is no desire to allocate any blocks.  It is used as a
+ * callback function for block_prepare_write(), nobh_writepage(), and
+ * block_write_full_page().  These functions should only try to map a
+ * single block at a time.
+ *
+ * Since this function doesn't do block allocations even if the caller
+ * requests it by passing in create=1, it is critically important that
+ * any caller checks to make sure that any buffer heads are returned
+ * by this function are either all already mapped or marked for
+ * delayed allocation before calling nobh_writepage() or
+ * block_write_full_page().  Otherwise, b_blocknr could be left
+ * unitialized, and the page write functions will be taken by
+ * surprise.
+ */
+static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
 				   struct buffer_head *bh_result, int create)
 {
 	int ret = 0;
 	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
 
+	BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
+
 	/*
 	 * we don't want to do block allocation in writepage
 	 * so call get_block_wrap with create = 0
 	 */
-	ret = ext4_get_blocks_wrap(NULL, inode, iblock, max_blocks,
-				   bh_result, 0, 0, 0);
+	ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0);
+	BUG_ON(create && ret == 0);
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
@@ -2358,10 +2539,11 @@ static int ext4_normal_get_block_write(struct inode *inode, sector_t iblock,
 }
 
 /*
- * get called vi ext4_da_writepages after taking page lock (have journal handle)
- * get called via journal_submit_inode_data_buffers (no journal handle)
- * get called via shrink_page_list via pdflush (no journal handle)
- * or grab_page_cache when doing write_begin (have journal handle)
+ * This function can get called via...
+ *   - ext4_da_writepages after taking page lock (have journal handle)
+ *   - journal_submit_inode_data_buffers (no journal handle)
+ *   - shrink_page_list via pdflush (no journal handle)
+ *   - grab_page_cache when doing write_begin (have journal handle)
  */
 static int ext4_da_writepage(struct page *page,
 				struct writeback_control *wbc)
@@ -2412,7 +2594,7 @@ static int ext4_da_writepage(struct page *page,
 		 * do block allocation here.
 		 */
 		ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
-						ext4_normal_get_block_write);
+					  noalloc_get_block_write);
 		if (!ret) {
 			page_bufs = page_buffers(page);
 			/* check whether all are mapped and non delay */
@@ -2437,11 +2619,10 @@ static int ext4_da_writepage(struct page *page,
 	}
 
 	if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
-		ret = nobh_writepage(page, ext4_normal_get_block_write, wbc);
+		ret = nobh_writepage(page, noalloc_get_block_write, wbc);
 	else
-		ret = block_write_full_page(page,
-						ext4_normal_get_block_write,
-						wbc);
+		ret = block_write_full_page(page, noalloc_get_block_write,
+					    wbc);
 
 	return ret;
 }
@@ -2753,7 +2934,7 @@ retry:
 	*pagep = page;
 
 	ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
-							ext4_da_get_block_prep);
+				ext4_da_get_block_prep);
 	if (ret < 0) {
 		unlock_page(page);
 		ext4_journal_stop(handle);
@@ -2791,7 +2972,7 @@ static int ext4_da_should_update_i_disksize(struct page *page,
 	for (i = 0; i < idx; i++)
 		bh = bh->b_this_page;
 
-	if (!buffer_mapped(bh) || (buffer_delay(bh)))
+	if (!buffer_mapped(bh) || (buffer_delay(bh)) || buffer_unwritten(bh))
 		return 0;
 	return 1;
 }
@@ -3061,12 +3242,10 @@ static int __ext4_normal_writepage(struct page *page,
 	struct inode *inode = page->mapping->host;
 
 	if (test_opt(inode->i_sb, NOBH))
-		return nobh_writepage(page,
-					ext4_normal_get_block_write, wbc);
+		return nobh_writepage(page, noalloc_get_block_write, wbc);
 	else
-		return block_write_full_page(page,
-						ext4_normal_get_block_write,
-						wbc);
+		return block_write_full_page(page, noalloc_get_block_write,
+					     wbc);
 }
 
 static int ext4_normal_writepage(struct page *page,
@@ -3118,7 +3297,7 @@ static int __ext4_journalled_writepage(struct page *page,
 	int err;
 
 	ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
-					ext4_normal_get_block_write);
+				  noalloc_get_block_write);
 	if (ret != 0)
 		goto out_unlock;
 
@@ -3203,9 +3382,8 @@ static int ext4_journalled_writepage(struct page *page,
 		 * really know unless we go poke around in the buffer_heads.
 		 * But block_write_full_page will do the right thing.
 		 */
-		return block_write_full_page(page,
-						ext4_normal_get_block_write,
-						wbc);
+		return block_write_full_page(page, noalloc_get_block_write,
+					     wbc);
 	}
 no_write:
 	redirty_page_for_writepage(wbc, page);
@@ -3949,7 +4127,8 @@ void ext4_truncate(struct inode *inode)
 	if (!ext4_can_truncate(inode))
 		return;
 
-	if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC))
+	if (ei->i_disksize && inode->i_size == 0 &&
+	    !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC))
 		ei->i_state |= EXT4_STATE_DA_ALLOC_CLOSE;
 
 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) {
@@ -4691,25 +4870,6 @@ int ext4_write_inode(struct inode *inode, int wait)
 	return ext4_force_commit(inode->i_sb);
 }
 
-int __ext4_write_dirty_metadata(struct inode *inode, struct buffer_head *bh)
-{
-	int err = 0;
-
-	mark_buffer_dirty(bh);
-	if (inode && inode_needs_sync(inode)) {
-		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh)) {
-			ext4_error(inode->i_sb, __func__,
-				   "IO error syncing inode, "
-				   "inode=%lu, block=%llu",
-				   inode->i_ino,
-				   (unsigned long long)bh->b_blocknr);
-			err = -EIO;
-		}
-	}
-	return err;
-}
-
 /*
  * ext4_setattr()
  *
@@ -4906,7 +5066,8 @@ static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
  */
 int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
 {
-	int groups, gdpblocks;
+	ext4_group_t groups, ngroups = ext4_get_groups_count(inode->i_sb);
+	int gdpblocks;
 	int idxblocks;
 	int ret = 0;
 
@@ -4933,8 +5094,8 @@ int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
 		groups += nrblocks;
 
 	gdpblocks = groups;
-	if (groups > EXT4_SB(inode->i_sb)->s_groups_count)
-		groups = EXT4_SB(inode->i_sb)->s_groups_count;
+	if (groups > ngroups)
+		groups = ngroups;
 	if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
 		gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
 
@@ -4974,7 +5135,7 @@ int ext4_writepage_trans_blocks(struct inode *inode)
  * Calculate the journal credits for a chunk of data modification.
  *
  * This is called from DIO, fallocate or whoever calling
- * ext4_get_blocks_wrap() to map/allocate a chunk of contigous disk blocks.
+ * ext4_get_blocks() to map/allocate a chunk of contigous disk blocks.
  *
  * journal buffers for data blocks are not included here, as DIO
  * and fallocate do no need to journal data buffers.
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index f871677a798..ed8482e22c0 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -372,24 +372,12 @@ static inline void mb_set_bit(int bit, void *addr)
 	ext4_set_bit(bit, addr);
 }
 
-static inline void mb_set_bit_atomic(spinlock_t *lock, int bit, void *addr)
-{
-	addr = mb_correct_addr_and_bit(&bit, addr);
-	ext4_set_bit_atomic(lock, bit, addr);
-}
-
 static inline void mb_clear_bit(int bit, void *addr)
 {
 	addr = mb_correct_addr_and_bit(&bit, addr);
 	ext4_clear_bit(bit, addr);
 }
 
-static inline void mb_clear_bit_atomic(spinlock_t *lock, int bit, void *addr)
-{
-	addr = mb_correct_addr_and_bit(&bit, addr);
-	ext4_clear_bit_atomic(lock, bit, addr);
-}
-
 static inline int mb_find_next_zero_bit(void *addr, int max, int start)
 {
 	int fix = 0, ret, tmpmax;
@@ -448,7 +436,7 @@ static void mb_free_blocks_double(struct inode *inode, struct ext4_buddy *e4b,
 
 	if (unlikely(e4b->bd_info->bb_bitmap == NULL))
 		return;
-	BUG_ON(!ext4_is_group_locked(sb, e4b->bd_group));
+	assert_spin_locked(ext4_group_lock_ptr(sb, e4b->bd_group));
 	for (i = 0; i < count; i++) {
 		if (!mb_test_bit(first + i, e4b->bd_info->bb_bitmap)) {
 			ext4_fsblk_t blocknr;
@@ -472,7 +460,7 @@ static void mb_mark_used_double(struct ext4_buddy *e4b, int first, int count)
 
 	if (unlikely(e4b->bd_info->bb_bitmap == NULL))
 		return;
-	BUG_ON(!ext4_is_group_locked(e4b->bd_sb, e4b->bd_group));
+	assert_spin_locked(ext4_group_lock_ptr(e4b->bd_sb, e4b->bd_group));
 	for (i = 0; i < count; i++) {
 		BUG_ON(mb_test_bit(first + i, e4b->bd_info->bb_bitmap));
 		mb_set_bit(first + i, e4b->bd_info->bb_bitmap);
@@ -739,6 +727,7 @@ static void ext4_mb_generate_buddy(struct super_block *sb,
 
 static int ext4_mb_init_cache(struct page *page, char *incore)
 {
+	ext4_group_t ngroups;
 	int blocksize;
 	int blocks_per_page;
 	int groups_per_page;
@@ -757,6 +746,7 @@ static int ext4_mb_init_cache(struct page *page, char *incore)
 
 	inode = page->mapping->host;
 	sb = inode->i_sb;
+	ngroups = ext4_get_groups_count(sb);
 	blocksize = 1 << inode->i_blkbits;
 	blocks_per_page = PAGE_CACHE_SIZE / blocksize;
 
@@ -780,7 +770,7 @@ static int ext4_mb_init_cache(struct page *page, char *incore)
 	for (i = 0; i < groups_per_page; i++) {
 		struct ext4_group_desc *desc;
 
-		if (first_group + i >= EXT4_SB(sb)->s_groups_count)
+		if (first_group + i >= ngroups)
 			break;
 
 		err = -EIO;
@@ -801,17 +791,17 @@ static int ext4_mb_init_cache(struct page *page, char *incore)
 			unlock_buffer(bh[i]);
 			continue;
 		}
-		spin_lock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
+		ext4_lock_group(sb, first_group + i);
 		if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 			ext4_init_block_bitmap(sb, bh[i],
 						first_group + i, desc);
 			set_bitmap_uptodate(bh[i]);
 			set_buffer_uptodate(bh[i]);
-			spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
+			ext4_unlock_group(sb, first_group + i);
 			unlock_buffer(bh[i]);
 			continue;
 		}
-		spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i));
+		ext4_unlock_group(sb, first_group + i);
 		if (buffer_uptodate(bh[i])) {
 			/*
 			 * if not uninit if bh is uptodate,
@@ -852,7 +842,7 @@ static int ext4_mb_init_cache(struct page *page, char *incore)
 		struct ext4_group_info *grinfo;
 
 		group = (first_block + i) >> 1;
-		if (group >= EXT4_SB(sb)->s_groups_count)
+		if (group >= ngroups)
 			break;
 
 		/*
@@ -1078,7 +1068,7 @@ static int mb_find_order_for_block(struct ext4_buddy *e4b, int block)
 	return 0;
 }
 
-static void mb_clear_bits(spinlock_t *lock, void *bm, int cur, int len)
+static void mb_clear_bits(void *bm, int cur, int len)
 {
 	__u32 *addr;
 
@@ -1091,15 +1081,12 @@ static void mb_clear_bits(spinlock_t *lock, void *bm, int cur, int len)
 			cur += 32;
 			continue;
 		}
-		if (lock)
-			mb_clear_bit_atomic(lock, cur, bm);
-		else
-			mb_clear_bit(cur, bm);
+		mb_clear_bit(cur, bm);
 		cur++;
 	}
 }
 
-static void mb_set_bits(spinlock_t *lock, void *bm, int cur, int len)
+static void mb_set_bits(void *bm, int cur, int len)
 {
 	__u32 *addr;
 
@@ -1112,10 +1099,7 @@ static void mb_set_bits(spinlock_t *lock, void *bm, int cur, int len)
 			cur += 32;
 			continue;
 		}
-		if (lock)
-			mb_set_bit_atomic(lock, cur, bm);
-		else
-			mb_set_bit(cur, bm);
+		mb_set_bit(cur, bm);
 		cur++;
 	}
 }
@@ -1131,7 +1115,7 @@ static void mb_free_blocks(struct inode *inode, struct ext4_buddy *e4b,
 	struct super_block *sb = e4b->bd_sb;
 
 	BUG_ON(first + count > (sb->s_blocksize << 3));
-	BUG_ON(!ext4_is_group_locked(sb, e4b->bd_group));
+	assert_spin_locked(ext4_group_lock_ptr(sb, e4b->bd_group));
 	mb_check_buddy(e4b);
 	mb_free_blocks_double(inode, e4b, first, count);
 
@@ -1212,7 +1196,7 @@ static int mb_find_extent(struct ext4_buddy *e4b, int order, int block,
 	int ord;
 	void *buddy;
 
-	BUG_ON(!ext4_is_group_locked(e4b->bd_sb, e4b->bd_group));
+	assert_spin_locked(ext4_group_lock_ptr(e4b->bd_sb, e4b->bd_group));
 	BUG_ON(ex == NULL);
 
 	buddy = mb_find_buddy(e4b, order, &max);
@@ -1276,7 +1260,7 @@ static int mb_mark_used(struct ext4_buddy *e4b, struct ext4_free_extent *ex)
 
 	BUG_ON(start + len > (e4b->bd_sb->s_blocksize << 3));
 	BUG_ON(e4b->bd_group != ex->fe_group);
-	BUG_ON(!ext4_is_group_locked(e4b->bd_sb, e4b->bd_group));
+	assert_spin_locked(ext4_group_lock_ptr(e4b->bd_sb, e4b->bd_group));
 	mb_check_buddy(e4b);
 	mb_mark_used_double(e4b, start, len);
 
@@ -1330,8 +1314,7 @@ static int mb_mark_used(struct ext4_buddy *e4b, struct ext4_free_extent *ex)
 		e4b->bd_info->bb_counters[ord]++;
 	}
 
-	mb_set_bits(sb_bgl_lock(EXT4_SB(e4b->bd_sb), ex->fe_group),
-			EXT4_MB_BITMAP(e4b), ex->fe_start, len0);
+	mb_set_bits(EXT4_MB_BITMAP(e4b), ex->fe_start, len0);
 	mb_check_buddy(e4b);
 
 	return ret;
@@ -1726,7 +1709,6 @@ static int ext4_mb_good_group(struct ext4_allocation_context *ac,
 	unsigned free, fragments;
 	unsigned i, bits;
 	int flex_size = ext4_flex_bg_size(EXT4_SB(ac->ac_sb));
-	struct ext4_group_desc *desc;
 	struct ext4_group_info *grp = ext4_get_group_info(ac->ac_sb, group);
 
 	BUG_ON(cr < 0 || cr >= 4);
@@ -1742,10 +1724,6 @@ static int ext4_mb_good_group(struct ext4_allocation_context *ac,
 	switch (cr) {
 	case 0:
 		BUG_ON(ac->ac_2order == 0);
-		/* If this group is uninitialized, skip it initially */
-		desc = ext4_get_group_desc(ac->ac_sb, group, NULL);
-		if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))
-			return 0;
 
 		/* Avoid using the first bg of a flexgroup for data files */
 		if ((ac->ac_flags & EXT4_MB_HINT_DATA) &&
@@ -1788,6 +1766,7 @@ int ext4_mb_get_buddy_cache_lock(struct super_block *sb, ext4_group_t group)
 	int block, pnum;
 	int blocks_per_page;
 	int groups_per_page;
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	ext4_group_t first_group;
 	struct ext4_group_info *grp;
 
@@ -1807,7 +1786,7 @@ int ext4_mb_get_buddy_cache_lock(struct super_block *sb, ext4_group_t group)
 	/* read all groups the page covers into the cache */
 	for (i = 0; i < groups_per_page; i++) {
 
-		if ((first_group + i) >= EXT4_SB(sb)->s_groups_count)
+		if ((first_group + i) >= ngroups)
 			break;
 		grp = ext4_get_group_info(sb, first_group + i);
 		/* take all groups write allocation
@@ -1945,8 +1924,7 @@ err:
 static noinline_for_stack int
 ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
 {
-	ext4_group_t group;
-	ext4_group_t i;
+	ext4_group_t ngroups, group, i;
 	int cr;
 	int err = 0;
 	int bsbits;
@@ -1957,6 +1935,7 @@ ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
 
 	sb = ac->ac_sb;
 	sbi = EXT4_SB(sb);
+	ngroups = ext4_get_groups_count(sb);
 	BUG_ON(ac->ac_status == AC_STATUS_FOUND);
 
 	/* first, try the goal */
@@ -2017,11 +1996,11 @@ repeat:
 		 */
 		group = ac->ac_g_ex.fe_group;
 
-		for (i = 0; i < EXT4_SB(sb)->s_groups_count; group++, i++) {
+		for (i = 0; i < ngroups; group++, i++) {
 			struct ext4_group_info *grp;
 			struct ext4_group_desc *desc;
 
-			if (group == EXT4_SB(sb)->s_groups_count)
+			if (group == ngroups)
 				group = 0;
 
 			/* quick check to skip empty groups */
@@ -2064,9 +2043,7 @@ repeat:
 
 			ac->ac_groups_scanned++;
 			desc = ext4_get_group_desc(sb, group, NULL);
-			if (cr == 0 || (desc->bg_flags &
-					cpu_to_le16(EXT4_BG_BLOCK_UNINIT) &&
-					ac->ac_2order != 0))
+			if (cr == 0)
 				ext4_mb_simple_scan_group(ac, &e4b);
 			else if (cr == 1 &&
 					ac->ac_g_ex.fe_len == sbi->s_stripe)
@@ -2315,12 +2292,10 @@ static struct file_operations ext4_mb_seq_history_fops = {
 static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos)
 {
 	struct super_block *sb = seq->private;
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	ext4_group_t group;
 
-	if (*pos < 0 || *pos >= sbi->s_groups_count)
+	if (*pos < 0 || *pos >= ext4_get_groups_count(sb))
 		return NULL;
-
 	group = *pos + 1;
 	return (void *) ((unsigned long) group);
 }
@@ -2328,11 +2303,10 @@ static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos)
 static void *ext4_mb_seq_groups_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	struct super_block *sb = seq->private;
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	ext4_group_t group;
 
 	++*pos;
-	if (*pos < 0 || *pos >= sbi->s_groups_count)
+	if (*pos < 0 || *pos >= ext4_get_groups_count(sb))
 		return NULL;
 	group = *pos + 1;
 	return (void *) ((unsigned long) group);
@@ -2420,7 +2394,8 @@ static void ext4_mb_history_release(struct super_block *sb)
 
 	if (sbi->s_proc != NULL) {
 		remove_proc_entry("mb_groups", sbi->s_proc);
-		remove_proc_entry("mb_history", sbi->s_proc);
+		if (sbi->s_mb_history_max)
+			remove_proc_entry("mb_history", sbi->s_proc);
 	}
 	kfree(sbi->s_mb_history);
 }
@@ -2431,17 +2406,17 @@ static void ext4_mb_history_init(struct super_block *sb)
 	int i;
 
 	if (sbi->s_proc != NULL) {
-		proc_create_data("mb_history", S_IRUGO, sbi->s_proc,
-				 &ext4_mb_seq_history_fops, sb);
+		if (sbi->s_mb_history_max)
+			proc_create_data("mb_history", S_IRUGO, sbi->s_proc,
+					 &ext4_mb_seq_history_fops, sb);
 		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
 				 &ext4_mb_seq_groups_fops, sb);
 	}
 
-	sbi->s_mb_history_max = 1000;
 	sbi->s_mb_history_cur = 0;
 	spin_lock_init(&sbi->s_mb_history_lock);
 	i = sbi->s_mb_history_max * sizeof(struct ext4_mb_history);
-	sbi->s_mb_history = kzalloc(i, GFP_KERNEL);
+	sbi->s_mb_history = i ? kzalloc(i, GFP_KERNEL) : NULL;
 	/* if we can't allocate history, then we simple won't use it */
 }
 
@@ -2451,7 +2426,7 @@ ext4_mb_store_history(struct ext4_allocation_context *ac)
 	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
 	struct ext4_mb_history h;
 
-	if (unlikely(sbi->s_mb_history == NULL))
+	if (sbi->s_mb_history == NULL)
 		return;
 
 	if (!(ac->ac_op & sbi->s_mb_history_filter))
@@ -2587,6 +2562,7 @@ void ext4_mb_update_group_info(struct ext4_group_info *grp, ext4_grpblk_t add)
 
 static int ext4_mb_init_backend(struct super_block *sb)
 {
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	ext4_group_t i;
 	int metalen;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -2598,7 +2574,7 @@ static int ext4_mb_init_backend(struct super_block *sb)
 	struct ext4_group_desc *desc;
 
 	/* This is the number of blocks used by GDT */
-	num_meta_group_infos = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) -
+	num_meta_group_infos = (ngroups + EXT4_DESC_PER_BLOCK(sb) -
 				1) >> EXT4_DESC_PER_BLOCK_BITS(sb);
 
 	/*
@@ -2644,7 +2620,7 @@ static int ext4_mb_init_backend(struct super_block *sb)
 	for (i = 0; i < num_meta_group_infos; i++) {
 		if ((i + 1) == num_meta_group_infos)
 			metalen = sizeof(*meta_group_info) *
-				(sbi->s_groups_count -
+				(ngroups -
 					(i << EXT4_DESC_PER_BLOCK_BITS(sb)));
 		meta_group_info = kmalloc(metalen, GFP_KERNEL);
 		if (meta_group_info == NULL) {
@@ -2655,7 +2631,7 @@ static int ext4_mb_init_backend(struct super_block *sb)
 		sbi->s_group_info[i] = meta_group_info;
 	}
 
-	for (i = 0; i < sbi->s_groups_count; i++) {
+	for (i = 0; i < ngroups; i++) {
 		desc = ext4_get_group_desc(sb, i, NULL);
 		if (desc == NULL) {
 			printk(KERN_ERR
@@ -2761,7 +2737,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
 	return 0;
 }
 
-/* need to called with ext4 group lock (ext4_lock_group) */
+/* need to called with the ext4 group lock held */
 static void ext4_mb_cleanup_pa(struct ext4_group_info *grp)
 {
 	struct ext4_prealloc_space *pa;
@@ -2781,13 +2757,14 @@ static void ext4_mb_cleanup_pa(struct ext4_group_info *grp)
 
 int ext4_mb_release(struct super_block *sb)
 {
+	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	ext4_group_t i;
 	int num_meta_group_infos;
 	struct ext4_group_info *grinfo;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
 	if (sbi->s_group_info) {
-		for (i = 0; i < sbi->s_groups_count; i++) {
+		for (i = 0; i < ngroups; i++) {
 			grinfo = ext4_get_group_info(sb, i);
 #ifdef DOUBLE_CHECK
 			kfree(grinfo->bb_bitmap);
@@ -2797,7 +2774,7 @@ int ext4_mb_release(struct super_block *sb)
 			ext4_unlock_group(sb, i);
 			kfree(grinfo);
 		}
-		num_meta_group_infos = (sbi->s_groups_count +
+		num_meta_group_infos = (ngroups +
 				EXT4_DESC_PER_BLOCK(sb) - 1) >>
 			EXT4_DESC_PER_BLOCK_BITS(sb);
 		for (i = 0; i < num_meta_group_infos; i++)
@@ -2984,27 +2961,25 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 		+ le32_to_cpu(es->s_first_data_block);
 
 	len = ac->ac_b_ex.fe_len;
-	if (in_range(ext4_block_bitmap(sb, gdp), block, len) ||
-	    in_range(ext4_inode_bitmap(sb, gdp), block, len) ||
-	    in_range(block, ext4_inode_table(sb, gdp),
-		     EXT4_SB(sb)->s_itb_per_group) ||
-	    in_range(block + len - 1, ext4_inode_table(sb, gdp),
-		     EXT4_SB(sb)->s_itb_per_group)) {
+	if (!ext4_data_block_valid(sbi, block, len)) {
 		ext4_error(sb, __func__,
-			   "Allocating block %llu in system zone of %d group\n",
-			   block, ac->ac_b_ex.fe_group);
+			   "Allocating blocks %llu-%llu which overlap "
+			   "fs metadata\n", block, block+len);
 		/* File system mounted not to panic on error
 		 * Fix the bitmap and repeat the block allocation
 		 * We leak some of the blocks here.
 		 */
-		mb_set_bits(sb_bgl_lock(sbi, ac->ac_b_ex.fe_group),
-				bitmap_bh->b_data, ac->ac_b_ex.fe_start,
-				ac->ac_b_ex.fe_len);
+		ext4_lock_group(sb, ac->ac_b_ex.fe_group);
+		mb_set_bits(bitmap_bh->b_data, ac->ac_b_ex.fe_start,
+			    ac->ac_b_ex.fe_len);
+		ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
 		err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
 		if (!err)
 			err = -EAGAIN;
 		goto out_err;
 	}
+
+	ext4_lock_group(sb, ac->ac_b_ex.fe_group);
 #ifdef AGGRESSIVE_CHECK
 	{
 		int i;
@@ -3014,9 +2989,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 		}
 	}
 #endif
-	spin_lock(sb_bgl_lock(sbi, ac->ac_b_ex.fe_group));
-	mb_set_bits(NULL, bitmap_bh->b_data,
-				ac->ac_b_ex.fe_start, ac->ac_b_ex.fe_len);
+	mb_set_bits(bitmap_bh->b_data, ac->ac_b_ex.fe_start,ac->ac_b_ex.fe_len);
 	if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
 		gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
 		ext4_free_blks_set(sb, gdp,
@@ -3026,7 +2999,8 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 	len = ext4_free_blks_count(sb, gdp) - ac->ac_b_ex.fe_len;
 	ext4_free_blks_set(sb, gdp, len);
 	gdp->bg_checksum = ext4_group_desc_csum(sbi, ac->ac_b_ex.fe_group, gdp);
-	spin_unlock(sb_bgl_lock(sbi, ac->ac_b_ex.fe_group));
+
+	ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
 	percpu_counter_sub(&sbi->s_freeblocks_counter, ac->ac_b_ex.fe_len);
 	/*
 	 * Now reduce the dirty block count also. Should not go negative
@@ -3459,7 +3433,7 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
  * the function goes through all block freed in the group
  * but not yet committed and marks them used in in-core bitmap.
  * buddy must be generated from this bitmap
- * Need to be called with ext4 group lock (ext4_lock_group)
+ * Need to be called with the ext4 group lock held
  */
 static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
 						ext4_group_t group)
@@ -3473,9 +3447,7 @@ static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
 
 	while (n) {
 		entry = rb_entry(n, struct ext4_free_data, node);
-		mb_set_bits(sb_bgl_lock(EXT4_SB(sb), group),
-				bitmap, entry->start_blk,
-				entry->count);
+		mb_set_bits(bitmap, entry->start_blk, entry->count);
 		n = rb_next(n);
 	}
 	return;
@@ -3484,7 +3456,7 @@ static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
 /*
  * the function goes through all preallocation in this group and marks them
  * used in in-core bitmap. buddy must be generated from this bitmap
- * Need to be called with ext4 group lock (ext4_lock_group)
+ * Need to be called with ext4 group lock held
  */
 static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
 					ext4_group_t group)
@@ -3516,8 +3488,7 @@ static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
 		if (unlikely(len == 0))
 			continue;
 		BUG_ON(groupnr != group);
-		mb_set_bits(sb_bgl_lock(EXT4_SB(sb), group),
-						bitmap, start, len);
+		mb_set_bits(bitmap, start, len);
 		preallocated += len;
 		count++;
 	}
@@ -4121,7 +4092,7 @@ static void ext4_mb_return_to_preallocation(struct inode *inode,
 static void ext4_mb_show_ac(struct ext4_allocation_context *ac)
 {
 	struct super_block *sb = ac->ac_sb;
-	ext4_group_t i;
+	ext4_group_t ngroups, i;
 
 	printk(KERN_ERR "EXT4-fs: Can't allocate:"
 			" Allocation context details:\n");
@@ -4145,7 +4116,8 @@ static void ext4_mb_show_ac(struct ext4_allocation_context *ac)
 	printk(KERN_ERR "EXT4-fs: %lu scanned, %d found\n", ac->ac_ex_scanned,
 		ac->ac_found);
 	printk(KERN_ERR "EXT4-fs: groups: \n");
-	for (i = 0; i < EXT4_SB(sb)->s_groups_count; i++) {
+	ngroups = ext4_get_groups_count(sb);
+	for (i = 0; i < ngroups; i++) {
 		struct ext4_group_info *grp = ext4_get_group_info(sb, i);
 		struct ext4_prealloc_space *pa;
 		ext4_grpblk_t start;
@@ -4469,13 +4441,13 @@ static int ext4_mb_release_context(struct ext4_allocation_context *ac)
 
 static int ext4_mb_discard_preallocations(struct super_block *sb, int needed)
 {
-	ext4_group_t i;
+	ext4_group_t i, ngroups = ext4_get_groups_count(sb);
 	int ret;
 	int freed = 0;
 
 	trace_mark(ext4_mb_discard_preallocations, "dev %s needed %d",
 		   sb->s_id, needed);
-	for (i = 0; i < EXT4_SB(sb)->s_groups_count && needed > 0; i++) {
+	for (i = 0; i < ngroups && needed > 0; i++) {
 		ret = ext4_mb_discard_group_preallocations(sb, i, needed);
 		freed += ret;
 		needed -= ret;
@@ -4859,29 +4831,25 @@ do_more:
 		new_entry->group  = block_group;
 		new_entry->count = count;
 		new_entry->t_tid = handle->h_transaction->t_tid;
+
 		ext4_lock_group(sb, block_group);
-		mb_clear_bits(sb_bgl_lock(sbi, block_group), bitmap_bh->b_data,
-				bit, count);
+		mb_clear_bits(bitmap_bh->b_data, bit, count);
 		ext4_mb_free_metadata(handle, &e4b, new_entry);
-		ext4_unlock_group(sb, block_group);
 	} else {
-		ext4_lock_group(sb, block_group);
 		/* need to update group_info->bb_free and bitmap
 		 * with group lock held. generate_buddy look at
 		 * them with group lock_held
 		 */
-		mb_clear_bits(sb_bgl_lock(sbi, block_group), bitmap_bh->b_data,
-				bit, count);
+		ext4_lock_group(sb, block_group);
+		mb_clear_bits(bitmap_bh->b_data, bit, count);
 		mb_free_blocks(inode, &e4b, bit, count);
 		ext4_mb_return_to_preallocation(inode, &e4b, block, count);
-		ext4_unlock_group(sb, block_group);
 	}
 
-	spin_lock(sb_bgl_lock(sbi, block_group));
 	ret = ext4_free_blks_count(sb, gdp) + count;
 	ext4_free_blks_set(sb, gdp, ret);
 	gdp->bg_checksum = ext4_group_desc_csum(sbi, block_group, gdp);
-	spin_unlock(sb_bgl_lock(sbi, block_group));
+	ext4_unlock_group(sb, block_group);
 	percpu_counter_add(&sbi->s_freeblocks_counter, count);
 
 	if (sbi->s_log_groups_per_flex) {
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index dd9e6cd5f6c..75e34f69215 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -23,7 +23,6 @@
 #include <linux/mutex.h>
 #include "ext4_jbd2.h"
 #include "ext4.h"
-#include "group.h"
 
 /*
  * with AGGRESSIVE_CHECK allocator runs consistency checks over
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 22098e1cd08..07eb6649e4f 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -37,7 +37,6 @@
 #include "ext4.h"
 #include "ext4_jbd2.h"
 
-#include "namei.h"
 #include "xattr.h"
 #include "acl.h"
 
@@ -750,7 +749,7 @@ static int dx_make_map(struct ext4_dir_entry_2 *de, unsigned blocksize,
 			ext4fs_dirhash(de->name, de->name_len, &h);
 			map_tail--;
 			map_tail->hash = h.hash;
-			map_tail->offs = (u16) ((char *) de - base);
+			map_tail->offs = ((char *) de - base)>>2;
 			map_tail->size = le16_to_cpu(de->rec_len);
 			count++;
 			cond_resched();
@@ -1148,7 +1147,8 @@ dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count,
 	unsigned rec_len = 0;
 
 	while (count--) {
-		struct ext4_dir_entry_2 *de = (struct ext4_dir_entry_2 *) (from + map->offs);
+		struct ext4_dir_entry_2 *de = (struct ext4_dir_entry_2 *) 
+						(from + (map->offs<<2));
 		rec_len = EXT4_DIR_REC_LEN(de->name_len);
 		memcpy (to, de, rec_len);
 		((struct ext4_dir_entry_2 *) to)->rec_len =
@@ -1997,7 +1997,7 @@ int ext4_orphan_add(handle_t *handle, struct inode *inode)
 	if (!ext4_handle_valid(handle))
 		return 0;
 
-	lock_super(sb);
+	mutex_lock(&EXT4_SB(sb)->s_orphan_lock);
 	if (!list_empty(&EXT4_I(inode)->i_orphan))
 		goto out_unlock;
 
@@ -2006,9 +2006,13 @@ int ext4_orphan_add(handle_t *handle, struct inode *inode)
 
 	/* @@@ FIXME: Observation from aviro:
 	 * I think I can trigger J_ASSERT in ext4_orphan_add().  We block
-	 * here (on lock_super()), so race with ext4_link() which might bump
+	 * here (on s_orphan_lock), so race with ext4_link() which might bump
 	 * ->i_nlink. For, say it, character device. Not a regular file,
 	 * not a directory, not a symlink and ->i_nlink > 0.
+	 *
+	 * tytso, 4/25/2009: I'm not sure how that could happen;
+	 * shouldn't the fs core protect us from these sort of
+	 * unlink()/link() races?
 	 */
 	J_ASSERT((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 		  S_ISLNK(inode->i_mode)) || inode->i_nlink == 0);
@@ -2045,7 +2049,7 @@ int ext4_orphan_add(handle_t *handle, struct inode *inode)
 	jbd_debug(4, "orphan inode %lu will point to %d\n",
 			inode->i_ino, NEXT_ORPHAN(inode));
 out_unlock:
-	unlock_super(sb);
+	mutex_unlock(&EXT4_SB(sb)->s_orphan_lock);
 	ext4_std_error(inode->i_sb, err);
 	return err;
 }
@@ -2066,11 +2070,9 @@ int ext4_orphan_del(handle_t *handle, struct inode *inode)
 	if (!ext4_handle_valid(handle))
 		return 0;
 
-	lock_super(inode->i_sb);
-	if (list_empty(&ei->i_orphan)) {
-		unlock_super(inode->i_sb);
-		return 0;
-	}
+	mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock);
+	if (list_empty(&ei->i_orphan))
+		goto out;
 
 	ino_next = NEXT_ORPHAN(inode);
 	prev = ei->i_orphan.prev;
@@ -2120,7 +2122,7 @@ int ext4_orphan_del(handle_t *handle, struct inode *inode)
 out_err:
 	ext4_std_error(inode->i_sb, err);
 out:
-	unlock_super(inode->i_sb);
+	mutex_unlock(&EXT4_SB(inode->i_sb)->s_orphan_lock);
 	return err;
 
 out_brelse:
@@ -2533,6 +2535,7 @@ const struct inode_operations ext4_dir_inode_operations = {
 	.removexattr	= generic_removexattr,
 #endif
 	.permission	= ext4_permission,
+	.fiemap         = ext4_fiemap,
 };
 
 const struct inode_operations ext4_special_inode_operations = {
diff --git a/fs/ext4/namei.h b/fs/ext4/namei.h
deleted file mode 100644
index 5e4dfff36a0..00000000000
--- a/fs/ext4/namei.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*  linux/fs/ext4/namei.h
- *
- * Copyright (C) 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
-*/
-
-extern struct dentry *ext4_get_parent(struct dentry *child);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 546c7dd869e..27eb289eea3 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 
 #include "ext4_jbd2.h"
-#include "group.h"
 
 #define outside(b, first, last)	((b) < (first) || (b) >= (last))
 #define inside(b, first, last)	((b) >= (first) && (b) < (last))
@@ -193,7 +192,7 @@ static int setup_new_group_blocks(struct super_block *sb,
 	if (IS_ERR(handle))
 		return PTR_ERR(handle);
 
-	lock_super(sb);
+	mutex_lock(&sbi->s_resize_lock);
 	if (input->group != sbi->s_groups_count) {
 		err = -EBUSY;
 		goto exit_journal;
@@ -302,7 +301,7 @@ exit_bh:
 	brelse(bh);
 
 exit_journal:
-	unlock_super(sb);
+	mutex_unlock(&sbi->s_resize_lock);
 	if ((err2 = ext4_journal_stop(handle)) && !err)
 		err = err2;
 
@@ -643,11 +642,12 @@ exit_free:
  * important part is that the new block and inode counts are in the backup
  * superblocks, and the location of the new group metadata in the GDT backups.
  *
- * We do not need lock_super() for this, because these blocks are not
- * otherwise touched by the filesystem code when it is mounted.  We don't
- * need to worry about last changing from sbi->s_groups_count, because the
- * worst that can happen is that we do not copy the full number of backups
- * at this time.  The resize which changed s_groups_count will backup again.
+ * We do not need take the s_resize_lock for this, because these
+ * blocks are not otherwise touched by the filesystem code when it is
+ * mounted.  We don't need to worry about last changing from
+ * sbi->s_groups_count, because the worst that can happen is that we
+ * do not copy the full number of backups at this time.  The resize
+ * which changed s_groups_count will backup again.
  */
 static void update_backups(struct super_block *sb,
 			   int blk_off, char *data, int size)
@@ -809,7 +809,7 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 		goto exit_put;
 	}
 
-	lock_super(sb);
+	mutex_lock(&sbi->s_resize_lock);
 	if (input->group != sbi->s_groups_count) {
 		ext4_warning(sb, __func__,
 			     "multiple resizers run on filesystem!");
@@ -840,7 +840,7 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
         /*
          * OK, now we've set up the new group.  Time to make it active.
          *
-         * Current kernels don't lock all allocations via lock_super(),
+         * We do not lock all allocations via s_resize_lock
          * so we have to be safe wrt. concurrent accesses the group
          * data.  So we need to be careful to set all of the relevant
          * group descriptor data etc. *before* we enable the group.
@@ -900,12 +900,12 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	 *
 	 * The precise rules we use are:
 	 *
-	 * * Writers of s_groups_count *must* hold lock_super
+	 * * Writers of s_groups_count *must* hold s_resize_lock
 	 * AND
 	 * * Writers must perform a smp_wmb() after updating all dependent
 	 *   data and before modifying the groups count
 	 *
-	 * * Readers must hold lock_super() over the access
+	 * * Readers must hold s_resize_lock over the access
 	 * OR
 	 * * Readers must perform an smp_rmb() after reading the groups count
 	 *   and before reading any dependent data.
@@ -948,7 +948,7 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	sb->s_dirt = 1;
 
 exit_journal:
-	unlock_super(sb);
+	mutex_unlock(&sbi->s_resize_lock);
 	if ((err2 = ext4_journal_stop(handle)) && !err)
 		err = err2;
 	if (!err) {
@@ -986,7 +986,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 
 	/* We don't need to worry about locking wrt other resizers just
 	 * yet: we're going to revalidate es->s_blocks_count after
-	 * taking lock_super() below. */
+	 * taking the s_resize_lock below. */
 	o_blocks_count = ext4_blocks_count(es);
 	o_groups_count = EXT4_SB(sb)->s_groups_count;
 
@@ -1056,11 +1056,11 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 		goto exit_put;
 	}
 
-	lock_super(sb);
+	mutex_lock(&EXT4_SB(sb)->s_resize_lock);
 	if (o_blocks_count != ext4_blocks_count(es)) {
 		ext4_warning(sb, __func__,
 			     "multiple resizers run on filesystem!");
-		unlock_super(sb);
+		mutex_unlock(&EXT4_SB(sb)->s_resize_lock);
 		ext4_journal_stop(handle);
 		err = -EBUSY;
 		goto exit_put;
@@ -1070,14 +1070,14 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 						 EXT4_SB(sb)->s_sbh))) {
 		ext4_warning(sb, __func__,
 			     "error %d on journal write access", err);
-		unlock_super(sb);
+		mutex_unlock(&EXT4_SB(sb)->s_resize_lock);
 		ext4_journal_stop(handle);
 		goto exit_put;
 	}
 	ext4_blocks_count_set(es, o_blocks_count + add);
 	ext4_handle_dirty_metadata(handle, NULL, EXT4_SB(sb)->s_sbh);
 	sb->s_dirt = 1;
-	unlock_super(sb);
+	mutex_unlock(&EXT4_SB(sb)->s_resize_lock);
 	ext4_debug("freeing blocks %llu through %llu\n", o_blocks_count,
 		   o_blocks_count + add);
 	/* We add the blocks to the bitmap and set the group need init bit */
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 2958f4e6f22..012c4251397 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/time.h>
+#include <linux/vmalloc.h>
 #include <linux/jbd2.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -45,16 +46,20 @@
 #include "ext4_jbd2.h"
 #include "xattr.h"
 #include "acl.h"
-#include "namei.h"
-#include "group.h"
+
+static int default_mb_history_length = 1000;
+
+module_param_named(default_mb_history_length, default_mb_history_length,
+		   int, 0644);
+MODULE_PARM_DESC(default_mb_history_length,
+		 "Default number of entries saved for mb_history");
 
 struct proc_dir_entry *ext4_proc_root;
 static struct kset *ext4_kset;
 
 static int ext4_load_journal(struct super_block *, struct ext4_super_block *,
 			     unsigned long journal_devnum);
-static int ext4_commit_super(struct super_block *sb,
-			      struct ext4_super_block *es, int sync);
+static int ext4_commit_super(struct super_block *sb, int sync);
 static void ext4_mark_recovery_complete(struct super_block *sb,
 					struct ext4_super_block *es);
 static void ext4_clear_journal_err(struct super_block *sb,
@@ -74,7 +79,7 @@ ext4_fsblk_t ext4_block_bitmap(struct super_block *sb,
 {
 	return le32_to_cpu(bg->bg_block_bitmap_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(ext4_fsblk_t)le32_to_cpu(bg->bg_block_bitmap_hi) << 32 : 0);
+		 (ext4_fsblk_t)le32_to_cpu(bg->bg_block_bitmap_hi) << 32 : 0);
 }
 
 ext4_fsblk_t ext4_inode_bitmap(struct super_block *sb,
@@ -82,7 +87,7 @@ ext4_fsblk_t ext4_inode_bitmap(struct super_block *sb,
 {
 	return le32_to_cpu(bg->bg_inode_bitmap_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_bitmap_hi) << 32 : 0);
+		 (ext4_fsblk_t)le32_to_cpu(bg->bg_inode_bitmap_hi) << 32 : 0);
 }
 
 ext4_fsblk_t ext4_inode_table(struct super_block *sb,
@@ -90,7 +95,7 @@ ext4_fsblk_t ext4_inode_table(struct super_block *sb,
 {
 	return le32_to_cpu(bg->bg_inode_table_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_table_hi) << 32 : 0);
+		 (ext4_fsblk_t)le32_to_cpu(bg->bg_inode_table_hi) << 32 : 0);
 }
 
 __u32 ext4_free_blks_count(struct super_block *sb,
@@ -98,7 +103,7 @@ __u32 ext4_free_blks_count(struct super_block *sb,
 {
 	return le16_to_cpu(bg->bg_free_blocks_count_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(__u32)le16_to_cpu(bg->bg_free_blocks_count_hi) << 16 : 0);
+		 (__u32)le16_to_cpu(bg->bg_free_blocks_count_hi) << 16 : 0);
 }
 
 __u32 ext4_free_inodes_count(struct super_block *sb,
@@ -106,7 +111,7 @@ __u32 ext4_free_inodes_count(struct super_block *sb,
 {
 	return le16_to_cpu(bg->bg_free_inodes_count_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(__u32)le16_to_cpu(bg->bg_free_inodes_count_hi) << 16 : 0);
+		 (__u32)le16_to_cpu(bg->bg_free_inodes_count_hi) << 16 : 0);
 }
 
 __u32 ext4_used_dirs_count(struct super_block *sb,
@@ -114,7 +119,7 @@ __u32 ext4_used_dirs_count(struct super_block *sb,
 {
 	return le16_to_cpu(bg->bg_used_dirs_count_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(__u32)le16_to_cpu(bg->bg_used_dirs_count_hi) << 16 : 0);
+		 (__u32)le16_to_cpu(bg->bg_used_dirs_count_hi) << 16 : 0);
 }
 
 __u32 ext4_itable_unused_count(struct super_block *sb,
@@ -122,7 +127,7 @@ __u32 ext4_itable_unused_count(struct super_block *sb,
 {
 	return le16_to_cpu(bg->bg_itable_unused_lo) |
 		(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
-		(__u32)le16_to_cpu(bg->bg_itable_unused_hi) << 16 : 0);
+		 (__u32)le16_to_cpu(bg->bg_itable_unused_hi) << 16 : 0);
 }
 
 void ext4_block_bitmap_set(struct super_block *sb,
@@ -202,8 +207,7 @@ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
 	journal = EXT4_SB(sb)->s_journal;
 	if (journal) {
 		if (is_journal_aborted(journal)) {
-			ext4_abort(sb, __func__,
-				   "Detected aborted journal");
+			ext4_abort(sb, __func__, "Detected aborted journal");
 			return ERR_PTR(-EROFS);
 		}
 		return jbd2_journal_start(journal, nblocks);
@@ -302,10 +306,10 @@ static void ext4_handle_error(struct super_block *sb)
 			jbd2_journal_abort(journal, -EIO);
 	}
 	if (test_opt(sb, ERRORS_RO)) {
-		printk(KERN_CRIT "Remounting filesystem read-only\n");
+		ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
 		sb->s_flags |= MS_RDONLY;
 	}
-	ext4_commit_super(sb, es, 1);
+	ext4_commit_super(sb, 1);
 	if (test_opt(sb, ERRORS_PANIC))
 		panic("EXT4-fs (device %s): panic forced after error\n",
 			sb->s_id);
@@ -395,8 +399,6 @@ void ext4_abort(struct super_block *sb, const char *function,
 {
 	va_list args;
 
-	printk(KERN_CRIT "ext4_abort called.\n");
-
 	va_start(args, fmt);
 	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
 	vprintk(fmt, args);
@@ -409,7 +411,7 @@ void ext4_abort(struct super_block *sb, const char *function,
 	if (sb->s_flags & MS_RDONLY)
 		return;
 
-	printk(KERN_CRIT "Remounting filesystem read-only\n");
+	ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
 	EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 	sb->s_flags |= MS_RDONLY;
 	EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT;
@@ -417,6 +419,18 @@ void ext4_abort(struct super_block *sb, const char *function,
 		jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
 }
 
+void ext4_msg (struct super_block * sb, const char *prefix,
+		   const char *fmt, ...)
+{
+	va_list args;
+
+	va_start(args, fmt);
+	printk("%sEXT4-fs (%s): ", prefix, sb->s_id);
+	vprintk(fmt, args);
+	printk("\n");
+	va_end(args);
+}
+
 void ext4_warning(struct super_block *sb, const char *function,
 		  const char *fmt, ...)
 {
@@ -431,7 +445,7 @@ void ext4_warning(struct super_block *sb, const char *function,
 }
 
 void ext4_grp_locked_error(struct super_block *sb, ext4_group_t grp,
-				const char *function, const char *fmt, ...)
+			   const char *function, const char *fmt, ...)
 __releases(bitlock)
 __acquires(bitlock)
 {
@@ -447,7 +461,7 @@ __acquires(bitlock)
 	if (test_opt(sb, ERRORS_CONT)) {
 		EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 		es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
-		ext4_commit_super(sb, es, 0);
+		ext4_commit_super(sb, 0);
 		return;
 	}
 	ext4_unlock_group(sb, grp);
@@ -467,7 +481,6 @@ __acquires(bitlock)
 	return;
 }
 
-
 void ext4_update_dynamic_rev(struct super_block *sb)
 {
 	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
@@ -496,7 +509,7 @@ void ext4_update_dynamic_rev(struct super_block *sb)
 /*
  * Open the external journal device
  */
-static struct block_device *ext4_blkdev_get(dev_t dev)
+static struct block_device *ext4_blkdev_get(dev_t dev, struct super_block *sb)
 {
 	struct block_device *bdev;
 	char b[BDEVNAME_SIZE];
@@ -507,7 +520,7 @@ static struct block_device *ext4_blkdev_get(dev_t dev)
 	return bdev;
 
 fail:
-	printk(KERN_ERR "EXT4-fs: failed to open journal device %s: %ld\n",
+	ext4_msg(sb, KERN_ERR, "failed to open journal device %s: %ld",
 			__bdevname(dev, b), PTR_ERR(bdev));
 	return NULL;
 }
@@ -543,8 +556,8 @@ static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi)
 {
 	struct list_head *l;
 
-	printk(KERN_ERR "sb orphan head is %d\n",
-	       le32_to_cpu(sbi->s_es->s_last_orphan));
+	ext4_msg(sb, KERN_ERR, "sb orphan head is %d",
+		 le32_to_cpu(sbi->s_es->s_last_orphan));
 
 	printk(KERN_ERR "sb_info orphan list:\n");
 	list_for_each(l, &sbi->s_orphan) {
@@ -563,6 +576,12 @@ static void ext4_put_super(struct super_block *sb)
 	struct ext4_super_block *es = sbi->s_es;
 	int i, err;
 
+	lock_super(sb);
+	lock_kernel();
+	if (sb->s_dirt)
+		ext4_commit_super(sb, 1);
+
+	ext4_release_system_zone(sb);
 	ext4_mb_release(sb);
 	ext4_ext_release(sb);
 	ext4_xattr_put_super(sb);
@@ -576,7 +595,7 @@ static void ext4_put_super(struct super_block *sb)
 	if (!(sb->s_flags & MS_RDONLY)) {
 		EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
 		es->s_state = cpu_to_le16(sbi->s_mount_state);
-		ext4_commit_super(sb, es, 1);
+		ext4_commit_super(sb, 1);
 	}
 	if (sbi->s_proc) {
 		remove_proc_entry(sb->s_id, ext4_proc_root);
@@ -586,7 +605,10 @@ static void ext4_put_super(struct super_block *sb)
 	for (i = 0; i < sbi->s_gdb_count; i++)
 		brelse(sbi->s_group_desc[i]);
 	kfree(sbi->s_group_desc);
-	kfree(sbi->s_flex_groups);
+	if (is_vmalloc_addr(sbi->s_flex_groups))
+		vfree(sbi->s_flex_groups);
+	else
+		kfree(sbi->s_flex_groups);
 	percpu_counter_destroy(&sbi->s_freeblocks_counter);
 	percpu_counter_destroy(&sbi->s_freeinodes_counter);
 	percpu_counter_destroy(&sbi->s_dirs_counter);
@@ -625,11 +647,8 @@ static void ext4_put_super(struct super_block *sb)
 	unlock_super(sb);
 	kobject_put(&sbi->s_kobj);
 	wait_for_completion(&sbi->s_kobj_unregister);
-	lock_super(sb);
-	lock_kernel();
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
-	return;
 }
 
 static struct kmem_cache *ext4_inode_cachep;
@@ -644,6 +663,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS);
 	if (!ei)
 		return NULL;
+
 #ifdef CONFIG_EXT4_FS_POSIX_ACL
 	ei->i_acl = EXT4_ACL_NOT_CACHED;
 	ei->i_default_acl = EXT4_ACL_NOT_CACHED;
@@ -664,14 +684,16 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 	ei->i_allocated_meta_blocks = 0;
 	ei->i_delalloc_reserved_flag = 0;
 	spin_lock_init(&(ei->i_block_reservation_lock));
+
 	return &ei->vfs_inode;
 }
 
 static void ext4_destroy_inode(struct inode *inode)
 {
 	if (!list_empty(&(EXT4_I(inode)->i_orphan))) {
-		printk("EXT4 Inode %p: orphan list check failed!\n",
-			EXT4_I(inode));
+		ext4_msg(inode->i_sb, KERN_ERR,
+			 "Inode %lu (%p): orphan list check failed!",
+			 inode->i_ino, EXT4_I(inode));
 		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4,
 				EXT4_I(inode), sizeof(struct ext4_inode_info),
 				true);
@@ -870,12 +892,12 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
 		seq_puts(seq, ",noauto_da_alloc");
 
 	ext4_show_quota_options(seq, sb);
+
 	return 0;
 }
 
-
 static struct inode *ext4_nfs_get_inode(struct super_block *sb,
-		u64 ino, u32 generation)
+					u64 ino, u32 generation)
 {
 	struct inode *inode;
 
@@ -904,14 +926,14 @@ static struct inode *ext4_nfs_get_inode(struct super_block *sb,
 }
 
 static struct dentry *ext4_fh_to_dentry(struct super_block *sb, struct fid *fid,
-		int fh_len, int fh_type)
+					int fh_len, int fh_type)
 {
 	return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
 				    ext4_nfs_get_inode);
 }
 
 static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid,
-		int fh_len, int fh_type)
+					int fh_len, int fh_type)
 {
 	return generic_fh_to_parent(sb, fid, fh_len, fh_type,
 				    ext4_nfs_get_inode);
@@ -923,7 +945,8 @@ static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid,
  * which would prevent try_to_free_buffers() from freeing them, we must use
  * jbd2 layer's try_to_free_buffers() function to release them.
  */
-static int bdev_try_to_free_page(struct super_block *sb, struct page *page, gfp_t wait)
+static int bdev_try_to_free_page(struct super_block *sb, struct page *page,
+				 gfp_t wait)
 {
 	journal_t *journal = EXT4_SB(sb)->s_journal;
 
@@ -992,7 +1015,6 @@ static const struct super_operations ext4_sops = {
 	.dirty_inode	= ext4_dirty_inode,
 	.delete_inode	= ext4_delete_inode,
 	.put_super	= ext4_put_super,
-	.write_super	= ext4_write_super,
 	.sync_fs	= ext4_sync_fs,
 	.freeze_fs	= ext4_freeze,
 	.unfreeze_fs	= ext4_unfreeze,
@@ -1007,6 +1029,25 @@ static const struct super_operations ext4_sops = {
 	.bdev_try_to_free_page = bdev_try_to_free_page,
 };
 
+static const struct super_operations ext4_nojournal_sops = {
+	.alloc_inode	= ext4_alloc_inode,
+	.destroy_inode	= ext4_destroy_inode,
+	.write_inode	= ext4_write_inode,
+	.dirty_inode	= ext4_dirty_inode,
+	.delete_inode	= ext4_delete_inode,
+	.write_super	= ext4_write_super,
+	.put_super	= ext4_put_super,
+	.statfs		= ext4_statfs,
+	.remount_fs	= ext4_remount,
+	.clear_inode	= ext4_clear_inode,
+	.show_options	= ext4_show_options,
+#ifdef CONFIG_QUOTA
+	.quota_read	= ext4_quota_read,
+	.quota_write	= ext4_quota_write,
+#endif
+	.bdev_try_to_free_page = bdev_try_to_free_page,
+};
+
 static const struct export_operations ext4_export_ops = {
 	.fh_to_dentry = ext4_fh_to_dentry,
 	.fh_to_parent = ext4_fh_to_parent,
@@ -1023,12 +1064,13 @@ enum {
 	Opt_journal_update, Opt_journal_dev,
 	Opt_journal_checksum, Opt_journal_async_commit,
 	Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
-	Opt_data_err_abort, Opt_data_err_ignore,
+	Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length,
 	Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
 	Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize,
 	Opt_usrquota, Opt_grpquota, Opt_i_version,
 	Opt_stripe, Opt_delalloc, Opt_nodelalloc,
+	Opt_block_validity, Opt_noblock_validity,
 	Opt_inode_readahead_blks, Opt_journal_ioprio
 };
 
@@ -1069,6 +1111,7 @@ static const match_table_t tokens = {
 	{Opt_data_writeback, "data=writeback"},
 	{Opt_data_err_abort, "data_err=abort"},
 	{Opt_data_err_ignore, "data_err=ignore"},
+	{Opt_mb_history_length, "mb_history_length=%u"},
 	{Opt_offusrjquota, "usrjquota="},
 	{Opt_usrjquota, "usrjquota=%s"},
 	{Opt_offgrpjquota, "grpjquota="},
@@ -1087,6 +1130,8 @@ static const match_table_t tokens = {
 	{Opt_resize, "resize"},
 	{Opt_delalloc, "delalloc"},
 	{Opt_nodelalloc, "nodelalloc"},
+	{Opt_block_validity, "block_validity"},
+	{Opt_noblock_validity, "noblock_validity"},
 	{Opt_inode_readahead_blks, "inode_readahead_blks=%u"},
 	{Opt_journal_ioprio, "journal_ioprio=%u"},
 	{Opt_auto_da_alloc, "auto_da_alloc=%u"},
@@ -1102,8 +1147,9 @@ static ext4_fsblk_t get_sb_block(void **data)
 
 	if (!options || strncmp(options, "sb=", 3) != 0)
 		return 1;	/* Default location */
+
 	options += 3;
-	/*todo: use simple_strtoll with >32bit ext4 */
+	/* TODO: use simple_strtoll with >32bit ext4 */
 	sb_block = simple_strtoul(options, &options, 0);
 	if (*options && *options != ',') {
 		printk(KERN_ERR "EXT4-fs: Invalid sb specification: %s\n",
@@ -1113,6 +1159,7 @@ static ext4_fsblk_t get_sb_block(void **data)
 	if (*options == ',')
 		options++;
 	*data = (void *) options;
+
 	return sb_block;
 }
 
@@ -1206,8 +1253,7 @@ static int parse_options(char *options, struct super_block *sb,
 #else
 		case Opt_user_xattr:
 		case Opt_nouser_xattr:
-			printk(KERN_ERR "EXT4 (no)user_xattr options "
-			       "not supported\n");
+			ext4_msg(sb, KERN_ERR, "(no)user_xattr options not supported");
 			break;
 #endif
 #ifdef CONFIG_EXT4_FS_POSIX_ACL
@@ -1220,8 +1266,7 @@ static int parse_options(char *options, struct super_block *sb,
 #else
 		case Opt_acl:
 		case Opt_noacl:
-			printk(KERN_ERR "EXT4 (no)acl options "
-			       "not supported\n");
+			ext4_msg(sb, KERN_ERR, "(no)acl options not supported");
 			break;
 #endif
 		case Opt_journal_update:
@@ -1231,16 +1276,16 @@ static int parse_options(char *options, struct super_block *sb,
 			   user to specify an existing inode to be the
 			   journal file. */
 			if (is_remount) {
-				printk(KERN_ERR "EXT4-fs: cannot specify "
-				       "journal on remount\n");
+				ext4_msg(sb, KERN_ERR,
+					 "Cannot specify journal on remount");
 				return 0;
 			}
 			set_opt(sbi->s_mount_opt, UPDATE_JOURNAL);
 			break;
 		case Opt_journal_dev:
 			if (is_remount) {
-				printk(KERN_ERR "EXT4-fs: cannot specify "
-				       "journal on remount\n");
+				ext4_msg(sb, KERN_ERR,
+					"Cannot specify journal on remount");
 				return 0;
 			}
 			if (match_int(&args[0], &option))
@@ -1294,9 +1339,8 @@ static int parse_options(char *options, struct super_block *sb,
 			if (is_remount) {
 				if ((sbi->s_mount_opt & EXT4_MOUNT_DATA_FLAGS)
 						!= data_opt) {
-					printk(KERN_ERR
-						"EXT4-fs: cannot change data "
-						"mode on remount\n");
+					ext4_msg(sb, KERN_ERR,
+						"Cannot change data mode on remount");
 					return 0;
 				}
 			} else {
@@ -1310,6 +1354,13 @@ static int parse_options(char *options, struct super_block *sb,
 		case Opt_data_err_ignore:
 			clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
 			break;
+		case Opt_mb_history_length:
+			if (match_int(&args[0], &option))
+				return 0;
+			if (option < 0)
+				return 0;
+			sbi->s_mb_history_max = option;
+			break;
 #ifdef CONFIG_QUOTA
 		case Opt_usrjquota:
 			qtype = USRQUOTA;
@@ -1319,31 +1370,31 @@ static int parse_options(char *options, struct super_block *sb,
 set_qf_name:
 			if (sb_any_quota_loaded(sb) &&
 			    !sbi->s_qf_names[qtype]) {
-				printk(KERN_ERR
-				       "EXT4-fs: Cannot change journaled "
-				       "quota options when quota turned on.\n");
+				ext4_msg(sb, KERN_ERR,
+				       "Cannot change journaled "
+				       "quota options when quota turned on");
 				return 0;
 			}
 			qname = match_strdup(&args[0]);
 			if (!qname) {
-				printk(KERN_ERR
-					"EXT4-fs: not enough memory for "
-					"storing quotafile name.\n");
+				ext4_msg(sb, KERN_ERR,
+					"Not enough memory for "
+					"storing quotafile name");
 				return 0;
 			}
 			if (sbi->s_qf_names[qtype] &&
 			    strcmp(sbi->s_qf_names[qtype], qname)) {
-				printk(KERN_ERR
-					"EXT4-fs: %s quota file already "
-					"specified.\n", QTYPE2NAME(qtype));
+				ext4_msg(sb, KERN_ERR,
+					"%s quota file already "
+					"specified", QTYPE2NAME(qtype));
 				kfree(qname);
 				return 0;
 			}
 			sbi->s_qf_names[qtype] = qname;
 			if (strchr(sbi->s_qf_names[qtype], '/')) {
-				printk(KERN_ERR
-					"EXT4-fs: quotafile must be on "
-					"filesystem root.\n");
+				ext4_msg(sb, KERN_ERR,
+					"quotafile must be on "
+					"filesystem root");
 				kfree(sbi->s_qf_names[qtype]);
 				sbi->s_qf_names[qtype] = NULL;
 				return 0;
@@ -1358,9 +1409,9 @@ set_qf_name:
 clear_qf_name:
 			if (sb_any_quota_loaded(sb) &&
 			    sbi->s_qf_names[qtype]) {
-				printk(KERN_ERR "EXT4-fs: Cannot change "
+				ext4_msg(sb, KERN_ERR, "Cannot change "
 					"journaled quota options when "
-					"quota turned on.\n");
+					"quota turned on");
 				return 0;
 			}
 			/*
@@ -1377,9 +1428,9 @@ clear_qf_name:
 set_qf_format:
 			if (sb_any_quota_loaded(sb) &&
 			    sbi->s_jquota_fmt != qfmt) {
-				printk(KERN_ERR "EXT4-fs: Cannot change "
+				ext4_msg(sb, KERN_ERR, "Cannot change "
 					"journaled quota options when "
-					"quota turned on.\n");
+					"quota turned on");
 				return 0;
 			}
 			sbi->s_jquota_fmt = qfmt;
@@ -1395,8 +1446,8 @@ set_qf_format:
 			break;
 		case Opt_noquota:
 			if (sb_any_quota_loaded(sb)) {
-				printk(KERN_ERR "EXT4-fs: Cannot change quota "
-					"options when quota turned on.\n");
+				ext4_msg(sb, KERN_ERR, "Cannot change quota "
+					"options when quota turned on");
 				return 0;
 			}
 			clear_opt(sbi->s_mount_opt, QUOTA);
@@ -1407,8 +1458,8 @@ set_qf_format:
 		case Opt_quota:
 		case Opt_usrquota:
 		case Opt_grpquota:
-			printk(KERN_ERR
-				"EXT4-fs: quota options not supported.\n");
+			ext4_msg(sb, KERN_ERR,
+				"quota options not supported");
 			break;
 		case Opt_usrjquota:
 		case Opt_grpjquota:
@@ -1416,9 +1467,8 @@ set_qf_format:
 		case Opt_offgrpjquota:
 		case Opt_jqfmt_vfsold:
 		case Opt_jqfmt_vfsv0:
-			printk(KERN_ERR
-				"EXT4-fs: journaled quota options not "
-				"supported.\n");
+			ext4_msg(sb, KERN_ERR,
+				"journaled quota options not supported");
 			break;
 		case Opt_noquota:
 			break;
@@ -1443,8 +1493,9 @@ set_qf_format:
 			break;
 		case Opt_resize:
 			if (!is_remount) {
-				printk("EXT4-fs: resize option only available "
-					"for remount\n");
+				ext4_msg(sb, KERN_ERR,
+					"resize option only available "
+					"for remount");
 				return 0;
 			}
 			if (match_int(&args[0], &option) != 0)
@@ -1474,14 +1525,21 @@ set_qf_format:
 		case Opt_delalloc:
 			set_opt(sbi->s_mount_opt, DELALLOC);
 			break;
+		case Opt_block_validity:
+			set_opt(sbi->s_mount_opt, BLOCK_VALIDITY);
+			break;
+		case Opt_noblock_validity:
+			clear_opt(sbi->s_mount_opt, BLOCK_VALIDITY);
+			break;
 		case Opt_inode_readahead_blks:
 			if (match_int(&args[0], &option))
 				return 0;
 			if (option < 0 || option > (1 << 30))
 				return 0;
-			if (option & (option - 1)) {
-				printk(KERN_ERR "EXT4-fs: inode_readahead_blks"
-				       " must be a power of 2\n");
+			if (!is_power_of_2(option)) {
+				ext4_msg(sb, KERN_ERR,
+					 "EXT4-fs: inode_readahead_blks"
+					 " must be a power of 2");
 				return 0;
 			}
 			sbi->s_inode_readahead_blks = option;
@@ -1508,9 +1566,9 @@ set_qf_format:
 				set_opt(sbi->s_mount_opt,NO_AUTO_DA_ALLOC);
 			break;
 		default:
-			printk(KERN_ERR
-			       "EXT4-fs: Unrecognized mount option \"%s\" "
-			       "or missing value\n", p);
+			ext4_msg(sb, KERN_ERR,
+			       "Unrecognized mount option \"%s\" "
+			       "or missing value", p);
 			return 0;
 		}
 	}
@@ -1528,21 +1586,21 @@ set_qf_format:
 				(sbi->s_mount_opt & EXT4_MOUNT_GRPQUOTA)) ||
 		    (sbi->s_qf_names[GRPQUOTA] &&
 				(sbi->s_mount_opt & EXT4_MOUNT_USRQUOTA))) {
-			printk(KERN_ERR "EXT4-fs: old and new quota "
-					"format mixing.\n");
+			ext4_msg(sb, KERN_ERR, "old and new quota "
+					"format mixing");
 			return 0;
 		}
 
 		if (!sbi->s_jquota_fmt) {
-			printk(KERN_ERR "EXT4-fs: journaled quota format "
-					"not specified.\n");
+			ext4_msg(sb, KERN_ERR, "journaled quota format "
+					"not specified");
 			return 0;
 		}
 	} else {
 		if (sbi->s_jquota_fmt) {
-			printk(KERN_ERR "EXT4-fs: journaled quota format "
+			ext4_msg(sb, KERN_ERR, "journaled quota format "
 					"specified with no journaling "
-					"enabled.\n");
+					"enabled");
 			return 0;
 		}
 	}
@@ -1557,32 +1615,32 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 	int res = 0;
 
 	if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) {
-		printk(KERN_ERR "EXT4-fs warning: revision level too high, "
-		       "forcing read-only mode\n");
+		ext4_msg(sb, KERN_ERR, "revision level too high, "
+			 "forcing read-only mode");
 		res = MS_RDONLY;
 	}
 	if (read_only)
 		return res;
 	if (!(sbi->s_mount_state & EXT4_VALID_FS))
-		printk(KERN_WARNING "EXT4-fs warning: mounting unchecked fs, "
-		       "running e2fsck is recommended\n");
+		ext4_msg(sb, KERN_WARNING, "warning: mounting unchecked fs, "
+			 "running e2fsck is recommended");
 	else if ((sbi->s_mount_state & EXT4_ERROR_FS))
-		printk(KERN_WARNING
-		       "EXT4-fs warning: mounting fs with errors, "
-		       "running e2fsck is recommended\n");
+		ext4_msg(sb, KERN_WARNING,
+			 "warning: mounting fs with errors, "
+			 "running e2fsck is recommended");
 	else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
 		 le16_to_cpu(es->s_mnt_count) >=
 		 (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
-		printk(KERN_WARNING
-		       "EXT4-fs warning: maximal mount count reached, "
-		       "running e2fsck is recommended\n");
+		ext4_msg(sb, KERN_WARNING,
+			 "warning: maximal mount count reached, "
+			 "running e2fsck is recommended");
 	else if (le32_to_cpu(es->s_checkinterval) &&
 		(le32_to_cpu(es->s_lastcheck) +
 			le32_to_cpu(es->s_checkinterval) <= get_seconds()))
-		printk(KERN_WARNING
-		       "EXT4-fs warning: checktime reached, "
-		       "running e2fsck is recommended\n");
-	if (!sbi->s_journal) 
+		ext4_msg(sb, KERN_WARNING,
+			 "warning: checktime reached, "
+			 "running e2fsck is recommended");
+	if (!sbi->s_journal)
 		es->s_state &= cpu_to_le16(~EXT4_VALID_FS);
 	if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
 		es->s_max_mnt_count = cpu_to_le16(EXT4_DFL_MAX_MNT_COUNT);
@@ -1592,7 +1650,7 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 	if (sbi->s_journal)
 		EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
 
-	ext4_commit_super(sb, es, 1);
+	ext4_commit_super(sb, 1);
 	if (test_opt(sb, DEBUG))
 		printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
 				"bpg=%lu, ipg=%lu, mo=%04lx]\n",
@@ -1603,11 +1661,11 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
 			sbi->s_mount_opt);
 
 	if (EXT4_SB(sb)->s_journal) {
-		printk(KERN_INFO "EXT4 FS on %s, %s journal on %s\n",
-		       sb->s_id, EXT4_SB(sb)->s_journal->j_inode ? "internal" :
+		ext4_msg(sb, KERN_INFO, "%s journal on %s",
+		       EXT4_SB(sb)->s_journal->j_inode ? "internal" :
 		       "external", EXT4_SB(sb)->s_journal->j_devname);
 	} else {
-		printk(KERN_INFO "EXT4 FS on %s, no journal\n", sb->s_id);
+		ext4_msg(sb, KERN_INFO, "no journal");
 	}
 	return res;
 }
@@ -1616,10 +1674,10 @@ static int ext4_fill_flex_info(struct super_block *sb)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	struct ext4_group_desc *gdp = NULL;
-	struct buffer_head *bh;
 	ext4_group_t flex_group_count;
 	ext4_group_t flex_group;
 	int groups_per_flex = 0;
+	size_t size;
 	int i;
 
 	if (!sbi->s_es->s_log_groups_per_flex) {
@@ -1634,16 +1692,21 @@ static int ext4_fill_flex_info(struct super_block *sb)
 	flex_group_count = ((sbi->s_groups_count + groups_per_flex - 1) +
 			((le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) + 1) <<
 			      EXT4_DESC_PER_BLOCK_BITS(sb))) / groups_per_flex;
-	sbi->s_flex_groups = kzalloc(flex_group_count *
-				     sizeof(struct flex_groups), GFP_KERNEL);
+	size = flex_group_count * sizeof(struct flex_groups);
+	sbi->s_flex_groups = kzalloc(size, GFP_KERNEL);
+	if (sbi->s_flex_groups == NULL) {
+		sbi->s_flex_groups = vmalloc(size);
+		if (sbi->s_flex_groups)
+			memset(sbi->s_flex_groups, 0, size);
+	}
 	if (sbi->s_flex_groups == NULL) {
-		printk(KERN_ERR "EXT4-fs: not enough memory for "
-				"%u flex groups\n", flex_group_count);
+		ext4_msg(sb, KERN_ERR, "not enough memory for "
+				"%u flex groups", flex_group_count);
 		goto failed;
 	}
 
 	for (i = 0; i < sbi->s_groups_count; i++) {
-		gdp = ext4_get_group_desc(sb, i, &bh);
+		gdp = ext4_get_group_desc(sb, i, NULL);
 
 		flex_group = ext4_flex_group(sbi, i);
 		atomic_set(&sbi->s_flex_groups[flex_group].free_inodes,
@@ -1724,44 +1787,44 @@ static int ext4_check_descriptors(struct super_block *sb)
 
 		block_bitmap = ext4_block_bitmap(sb, gdp);
 		if (block_bitmap < first_block || block_bitmap > last_block) {
-			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
+			ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
 			       "Block bitmap for group %u not in group "
-			       "(block %llu)!\n", i, block_bitmap);
+			       "(block %llu)!", i, block_bitmap);
 			return 0;
 		}
 		inode_bitmap = ext4_inode_bitmap(sb, gdp);
 		if (inode_bitmap < first_block || inode_bitmap > last_block) {
-			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
+			ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
 			       "Inode bitmap for group %u not in group "
-			       "(block %llu)!\n", i, inode_bitmap);
+			       "(block %llu)!", i, inode_bitmap);
 			return 0;
 		}
 		inode_table = ext4_inode_table(sb, gdp);
 		if (inode_table < first_block ||
 		    inode_table + sbi->s_itb_per_group - 1 > last_block) {
-			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
+			ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
 			       "Inode table for group %u not in group "
-			       "(block %llu)!\n", i, inode_table);
+			       "(block %llu)!", i, inode_table);
 			return 0;
 		}
-		spin_lock(sb_bgl_lock(sbi, i));
+		ext4_lock_group(sb, i);
 		if (!ext4_group_desc_csum_verify(sbi, i, gdp)) {
-			printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: "
-			       "Checksum for group %u failed (%u!=%u)\n",
-			       i, le16_to_cpu(ext4_group_desc_csum(sbi, i,
-			       gdp)), le16_to_cpu(gdp->bg_checksum));
+			ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
+				 "Checksum for group %u failed (%u!=%u)",
+				 i, le16_to_cpu(ext4_group_desc_csum(sbi, i,
+				     gdp)), le16_to_cpu(gdp->bg_checksum));
 			if (!(sb->s_flags & MS_RDONLY)) {
-				spin_unlock(sb_bgl_lock(sbi, i));
+				ext4_unlock_group(sb, i);
 				return 0;
 			}
 		}
-		spin_unlock(sb_bgl_lock(sbi, i));
+		ext4_unlock_group(sb, i);
 		if (!flexbg_flag)
 			first_block += EXT4_BLOCKS_PER_GROUP(sb);
 	}
 
 	ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb));
-	sbi->s_es->s_free_inodes_count = cpu_to_le32(ext4_count_free_inodes(sb));
+	sbi->s_es->s_free_inodes_count =cpu_to_le32(ext4_count_free_inodes(sb));
 	return 1;
 }
 
@@ -1796,8 +1859,8 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 	}
 
 	if (bdev_read_only(sb->s_bdev)) {
-		printk(KERN_ERR "EXT4-fs: write access "
-			"unavailable, skipping orphan cleanup.\n");
+		ext4_msg(sb, KERN_ERR, "write access "
+			"unavailable, skipping orphan cleanup");
 		return;
 	}
 
@@ -1811,8 +1874,7 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 	}
 
 	if (s_flags & MS_RDONLY) {
-		printk(KERN_INFO "EXT4-fs: %s: orphan cleanup on readonly fs\n",
-		       sb->s_id);
+		ext4_msg(sb, KERN_INFO, "orphan cleanup on readonly fs");
 		sb->s_flags &= ~MS_RDONLY;
 	}
 #ifdef CONFIG_QUOTA
@@ -1823,9 +1885,9 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 		if (EXT4_SB(sb)->s_qf_names[i]) {
 			int ret = ext4_quota_on_mount(sb, i);
 			if (ret < 0)
-				printk(KERN_ERR
-					"EXT4-fs: Cannot turn on journaled "
-					"quota: error %d\n", ret);
+				ext4_msg(sb, KERN_ERR,
+					"Cannot turn on journaled "
+					"quota: error %d", ret);
 		}
 	}
 #endif
@@ -1842,16 +1904,16 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 		list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan);
 		vfs_dq_init(inode);
 		if (inode->i_nlink) {
-			printk(KERN_DEBUG
-				"%s: truncating inode %lu to %lld bytes\n",
+			ext4_msg(sb, KERN_DEBUG,
+				"%s: truncating inode %lu to %lld bytes",
 				__func__, inode->i_ino, inode->i_size);
 			jbd_debug(2, "truncating inode %lu to %lld bytes\n",
 				  inode->i_ino, inode->i_size);
 			ext4_truncate(inode);
 			nr_truncates++;
 		} else {
-			printk(KERN_DEBUG
-				"%s: deleting unreferenced inode %lu\n",
+			ext4_msg(sb, KERN_DEBUG,
+				"%s: deleting unreferenced inode %lu",
 				__func__, inode->i_ino);
 			jbd_debug(2, "deleting unreferenced inode %lu\n",
 				  inode->i_ino);
@@ -1863,11 +1925,11 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 #define PLURAL(x) (x), ((x) == 1) ? "" : "s"
 
 	if (nr_orphans)
-		printk(KERN_INFO "EXT4-fs: %s: %d orphan inode%s deleted\n",
-		       sb->s_id, PLURAL(nr_orphans));
+		ext4_msg(sb, KERN_INFO, "%d orphan inode%s deleted",
+		       PLURAL(nr_orphans));
 	if (nr_truncates)
-		printk(KERN_INFO "EXT4-fs: %s: %d truncate%s cleaned up\n",
-		       sb->s_id, PLURAL(nr_truncates));
+		ext4_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
+		       PLURAL(nr_truncates));
 #ifdef CONFIG_QUOTA
 	/* Turn quotas off */
 	for (i = 0; i < MAXQUOTAS; i++) {
@@ -1877,6 +1939,7 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 #endif
 	sb->s_flags = s_flags; /* Restore MS_RDONLY status */
 }
+
 /*
  * Maximal extent format file size.
  * Resulting logical blkno at s_maxbytes must fit in our on-disk
@@ -1927,19 +1990,19 @@ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files)
 	loff_t res = EXT4_NDIR_BLOCKS;
 	int meta_blocks;
 	loff_t upper_limit;
-	/* This is calculated to be the largest file size for a
-	 * dense, bitmapped file such that the total number of
-	 * sectors in the file, including data and all indirect blocks,
-	 * does not exceed 2^48 -1
-	 * __u32 i_blocks_lo and _u16 i_blocks_high representing the
-	 * total number of  512 bytes blocks of the file
+	/* This is calculated to be the largest file size for a dense, block
+	 * mapped file such that the file's total number of 512-byte sectors,
+	 * including data and all indirect blocks, does not exceed (2^48 - 1).
+	 *
+	 * __u32 i_blocks_lo and _u16 i_blocks_high represent the total
+	 * number of 512-byte sectors of the file.
 	 */
 
 	if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
 		/*
-		 * !has_huge_files or CONFIG_LBD is not enabled
-		 * implies the inode i_block represent total blocks in
-		 * 512 bytes 32 == size of vfs inode i_blocks * 8
+		 * !has_huge_files or CONFIG_LBD not enabled implies that
+		 * the inode i_block field represents total file blocks in
+		 * 2^32 512-byte sectors == size of vfs inode i_blocks * 8
 		 */
 		upper_limit = (1LL << 32) - 1;
 
@@ -1981,7 +2044,7 @@ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files)
 }
 
 static ext4_fsblk_t descriptor_loc(struct super_block *sb,
-				ext4_fsblk_t logical_sb_block, int nr)
+				   ext4_fsblk_t logical_sb_block, int nr)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	ext4_group_t bg, first_meta_bg;
@@ -1995,6 +2058,7 @@ static ext4_fsblk_t descriptor_loc(struct super_block *sb,
 	bg = sbi->s_desc_per_block * nr;
 	if (ext4_bg_has_super(sb, bg))
 		has_super = 1;
+
 	return (has_super + ext4_group_first_block_no(sb, bg));
 }
 
@@ -2091,8 +2155,7 @@ static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
 	if (parse_strtoul(buf, 0x40000000, &t))
 		return -EINVAL;
 
-	/* inode_readahead_blks must be a power of 2 */
-	if (t & (t-1))
+	if (!is_power_of_2(t))
 		return -EINVAL;
 
 	sbi->s_inode_readahead_blks = t;
@@ -2100,7 +2163,7 @@ static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
 }
 
 static ssize_t sbi_ui_show(struct ext4_attr *a,
-				struct ext4_sb_info *sbi, char *buf)
+			   struct ext4_sb_info *sbi, char *buf)
 {
 	unsigned int *ui = (unsigned int *) (((char *) sbi) + a->offset);
 
@@ -2205,7 +2268,6 @@ static struct kobj_type ext4_ktype = {
 static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 				__releases(kernel_lock)
 				__acquires(kernel_lock)
-
 {
 	struct buffer_head *bh;
 	struct ext4_super_block *es = NULL;
@@ -2256,7 +2318,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 
 	blocksize = sb_min_blocksize(sb, EXT4_MIN_BLOCK_SIZE);
 	if (!blocksize) {
-		printk(KERN_ERR "EXT4-fs: unable to set blocksize\n");
+		ext4_msg(sb, KERN_ERR, "unable to set blocksize");
 		goto out_fail;
 	}
 
@@ -2272,7 +2334,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	if (!(bh = sb_bread(sb, logical_sb_block))) {
-		printk(KERN_ERR "EXT4-fs: unable to read superblock\n");
+		ext4_msg(sb, KERN_ERR, "unable to read superblock");
 		goto out_fail;
 	}
 	/*
@@ -2321,6 +2383,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
 	sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
 	sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
+	sbi->s_mb_history_max = default_mb_history_length;
 
 	set_opt(sbi->s_mount_opt, BARRIER);
 
@@ -2330,7 +2393,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	 */
 	set_opt(sbi->s_mount_opt, DELALLOC);
 
-
 	if (!parse_options((char *) data, sb, &journal_devnum,
 			   &journal_ioprio, NULL, 0))
 		goto failed_mount;
@@ -2342,9 +2404,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	    (EXT4_HAS_COMPAT_FEATURE(sb, ~0U) ||
 	     EXT4_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
 	     EXT4_HAS_INCOMPAT_FEATURE(sb, ~0U)))
-		printk(KERN_WARNING
-		       "EXT4-fs warning: feature flags set on rev 0 fs, "
-		       "running e2fsck is recommended\n");
+		ext4_msg(sb, KERN_WARNING,
+		       "feature flags set on rev 0 fs, "
+		       "running e2fsck is recommended");
 
 	/*
 	 * Check feature flags regardless of the revision level, since we
@@ -2353,16 +2415,18 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	 */
 	features = EXT4_HAS_INCOMPAT_FEATURE(sb, ~EXT4_FEATURE_INCOMPAT_SUPP);
 	if (features) {
-		printk(KERN_ERR "EXT4-fs: %s: couldn't mount because of "
-		       "unsupported optional features (%x).\n", sb->s_id,
+		ext4_msg(sb, KERN_ERR,
+			"Couldn't mount because of "
+			"unsupported optional features (%x)",
 			(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_incompat) &
 			~EXT4_FEATURE_INCOMPAT_SUPP));
 		goto failed_mount;
 	}
 	features = EXT4_HAS_RO_COMPAT_FEATURE(sb, ~EXT4_FEATURE_RO_COMPAT_SUPP);
 	if (!(sb->s_flags & MS_RDONLY) && features) {
-		printk(KERN_ERR "EXT4-fs: %s: couldn't mount RDWR because of "
-		       "unsupported optional features (%x).\n", sb->s_id,
+		ext4_msg(sb, KERN_ERR,
+			"Couldn't mount RDWR because of "
+			"unsupported optional features (%x)",
 			(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_ro_compat) &
 			~EXT4_FEATURE_RO_COMPAT_SUPP));
 		goto failed_mount;
@@ -2376,9 +2440,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		 */
 		if (sizeof(root->i_blocks) < sizeof(u64) &&
 				!(sb->s_flags & MS_RDONLY)) {
-			printk(KERN_ERR "EXT4-fs: %s: Filesystem with huge "
+			ext4_msg(sb, KERN_ERR, "Filesystem with huge "
 					"files cannot be mounted read-write "
-					"without CONFIG_LBD.\n", sb->s_id);
+					"without CONFIG_LBD");
 			goto failed_mount;
 		}
 	}
@@ -2386,17 +2450,15 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 
 	if (blocksize < EXT4_MIN_BLOCK_SIZE ||
 	    blocksize > EXT4_MAX_BLOCK_SIZE) {
-		printk(KERN_ERR
-		       "EXT4-fs: Unsupported filesystem blocksize %d on %s.\n",
-		       blocksize, sb->s_id);
+		ext4_msg(sb, KERN_ERR,
+		       "Unsupported filesystem blocksize %d", blocksize);
 		goto failed_mount;
 	}
 
 	if (sb->s_blocksize != blocksize) {
-
 		/* Validate the filesystem blocksize */
 		if (!sb_set_blocksize(sb, blocksize)) {
-			printk(KERN_ERR "EXT4-fs: bad block size %d.\n",
+			ext4_msg(sb, KERN_ERR, "bad block size %d",
 					blocksize);
 			goto failed_mount;
 		}
@@ -2406,15 +2468,15 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		offset = do_div(logical_sb_block, blocksize);
 		bh = sb_bread(sb, logical_sb_block);
 		if (!bh) {
-			printk(KERN_ERR
-			       "EXT4-fs: Can't read superblock on 2nd try.\n");
+			ext4_msg(sb, KERN_ERR,
+			       "Can't read superblock on 2nd try");
 			goto failed_mount;
 		}
 		es = (struct ext4_super_block *)(((char *)bh->b_data) + offset);
 		sbi->s_es = es;
 		if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) {
-			printk(KERN_ERR
-			       "EXT4-fs: Magic mismatch, very weird !\n");
+			ext4_msg(sb, KERN_ERR,
+			       "Magic mismatch, very weird!");
 			goto failed_mount;
 		}
 	}
@@ -2432,30 +2494,33 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) ||
 		    (!is_power_of_2(sbi->s_inode_size)) ||
 		    (sbi->s_inode_size > blocksize)) {
-			printk(KERN_ERR
-			       "EXT4-fs: unsupported inode size: %d\n",
+			ext4_msg(sb, KERN_ERR,
+			       "unsupported inode size: %d",
 			       sbi->s_inode_size);
 			goto failed_mount;
 		}
 		if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE)
 			sb->s_time_gran = 1 << (EXT4_EPOCH_BITS - 2);
 	}
+
 	sbi->s_desc_size = le16_to_cpu(es->s_desc_size);
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) {
 		if (sbi->s_desc_size < EXT4_MIN_DESC_SIZE_64BIT ||
 		    sbi->s_desc_size > EXT4_MAX_DESC_SIZE ||
 		    !is_power_of_2(sbi->s_desc_size)) {
-			printk(KERN_ERR
-			       "EXT4-fs: unsupported descriptor size %lu\n",
+			ext4_msg(sb, KERN_ERR,
+			       "unsupported descriptor size %lu",
 			       sbi->s_desc_size);
 			goto failed_mount;
 		}
 	} else
 		sbi->s_desc_size = EXT4_MIN_DESC_SIZE;
+
 	sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
 	sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
 	if (EXT4_INODE_SIZE(sb) == 0 || EXT4_INODES_PER_GROUP(sb) == 0)
 		goto cantfind_ext4;
+
 	sbi->s_inodes_per_block = blocksize / EXT4_INODE_SIZE(sb);
 	if (sbi->s_inodes_per_block == 0)
 		goto cantfind_ext4;
@@ -2466,6 +2531,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_mount_state = le16_to_cpu(es->s_state);
 	sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
 	sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
+
 	for (i = 0; i < 4; i++)
 		sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
 	sbi->s_def_hash_version = es->s_def_hash_version;
@@ -2483,25 +2549,24 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	if (sbi->s_blocks_per_group > blocksize * 8) {
-		printk(KERN_ERR
-		       "EXT4-fs: #blocks per group too big: %lu\n",
+		ext4_msg(sb, KERN_ERR,
+		       "#blocks per group too big: %lu",
 		       sbi->s_blocks_per_group);
 		goto failed_mount;
 	}
 	if (sbi->s_inodes_per_group > blocksize * 8) {
-		printk(KERN_ERR
-		       "EXT4-fs: #inodes per group too big: %lu\n",
+		ext4_msg(sb, KERN_ERR,
+		       "#inodes per group too big: %lu",
 		       sbi->s_inodes_per_group);
 		goto failed_mount;
 	}
 
 	if (ext4_blocks_count(es) >
 		    (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) {
-		printk(KERN_ERR "EXT4-fs: filesystem on %s:"
-			" too large to mount safely\n", sb->s_id);
+		ext4_msg(sb, KERN_ERR, "filesystem"
+			" too large to mount safely");
 		if (sizeof(sector_t) < 8)
-			printk(KERN_WARNING "EXT4-fs: CONFIG_LBD not "
-					"enabled\n");
+			ext4_msg(sb, KERN_WARNING, "CONFIG_LBD not enabled");
 		goto failed_mount;
 	}
 
@@ -2511,21 +2576,21 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	/* check blocks count against device size */
 	blocks_count = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
 	if (blocks_count && ext4_blocks_count(es) > blocks_count) {
-		printk(KERN_WARNING "EXT4-fs: bad geometry: block count %llu "
-		       "exceeds size of device (%llu blocks)\n",
+		ext4_msg(sb, KERN_WARNING, "bad geometry: block count %llu "
+		       "exceeds size of device (%llu blocks)",
 		       ext4_blocks_count(es), blocks_count);
 		goto failed_mount;
 	}
 
-        /*
-         * It makes no sense for the first data block to be beyond the end
-         * of the filesystem.
-         */
-        if (le32_to_cpu(es->s_first_data_block) >= ext4_blocks_count(es)) {
-                printk(KERN_WARNING "EXT4-fs: bad geometry: first data"
-		       "block %u is beyond end of filesystem (%llu)\n",
-		       le32_to_cpu(es->s_first_data_block),
-		       ext4_blocks_count(es));
+	/*
+	 * It makes no sense for the first data block to be beyond the end
+	 * of the filesystem.
+	 */
+	if (le32_to_cpu(es->s_first_data_block) >= ext4_blocks_count(es)) {
+                ext4_msg(sb, KERN_WARNING, "bad geometry: first data"
+			 "block %u is beyond end of filesystem (%llu)",
+			 le32_to_cpu(es->s_first_data_block),
+			 ext4_blocks_count(es));
 		goto failed_mount;
 	}
 	blocks_count = (ext4_blocks_count(es) -
@@ -2533,9 +2598,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 			EXT4_BLOCKS_PER_GROUP(sb) - 1);
 	do_div(blocks_count, EXT4_BLOCKS_PER_GROUP(sb));
 	if (blocks_count > ((uint64_t)1<<32) - EXT4_DESC_PER_BLOCK(sb)) {
-		printk(KERN_WARNING "EXT4-fs: groups count too large: %u "
+		ext4_msg(sb, KERN_WARNING, "groups count too large: %u "
 		       "(block count %llu, first data block %u, "
-		       "blocks per group %lu)\n", sbi->s_groups_count,
+		       "blocks per group %lu)", sbi->s_groups_count,
 		       ext4_blocks_count(es),
 		       le32_to_cpu(es->s_first_data_block),
 		       EXT4_BLOCKS_PER_GROUP(sb));
@@ -2547,7 +2612,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_group_desc = kmalloc(db_count * sizeof(struct buffer_head *),
 				    GFP_KERNEL);
 	if (sbi->s_group_desc == NULL) {
-		printk(KERN_ERR "EXT4-fs: not enough memory\n");
+		ext4_msg(sb, KERN_ERR, "not enough memory");
 		goto failed_mount;
 	}
 
@@ -2562,21 +2627,21 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		block = descriptor_loc(sb, logical_sb_block, i);
 		sbi->s_group_desc[i] = sb_bread(sb, block);
 		if (!sbi->s_group_desc[i]) {
-			printk(KERN_ERR "EXT4-fs: "
-			       "can't read group descriptor %d\n", i);
+			ext4_msg(sb, KERN_ERR,
+			       "can't read group descriptor %d", i);
 			db_count = i;
 			goto failed_mount2;
 		}
 	}
 	if (!ext4_check_descriptors(sb)) {
-		printk(KERN_ERR "EXT4-fs: group descriptors corrupted!\n");
+		ext4_msg(sb, KERN_ERR, "group descriptors corrupted!");
 		goto failed_mount2;
 	}
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
 		if (!ext4_fill_flex_info(sb)) {
-			printk(KERN_ERR
-			       "EXT4-fs: unable to initialize "
-			       "flex_bg meta info!\n");
+			ext4_msg(sb, KERN_ERR,
+			       "unable to initialize "
+			       "flex_bg meta info!");
 			goto failed_mount2;
 		}
 
@@ -2598,7 +2663,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
 	}
 	if (err) {
-		printk(KERN_ERR "EXT4-fs: insufficient memory\n");
+		ext4_msg(sb, KERN_ERR, "insufficient memory");
 		goto failed_mount3;
 	}
 
@@ -2607,7 +2672,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	/*
 	 * set up enough so that it can read an inode
 	 */
-	sb->s_op = &ext4_sops;
+	if (!test_opt(sb, NOLOAD) &&
+	    EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
+		sb->s_op = &ext4_sops;
+	else
+		sb->s_op = &ext4_nojournal_sops;
 	sb->s_export_op = &ext4_export_ops;
 	sb->s_xattr = ext4_xattr_handlers;
 #ifdef CONFIG_QUOTA
@@ -2615,6 +2684,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sb->dq_op = &ext4_quota_operations;
 #endif
 	INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
+	mutex_init(&sbi->s_orphan_lock);
+	mutex_init(&sbi->s_resize_lock);
 
 	sb->s_root = NULL;
 
@@ -2632,13 +2703,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 			goto failed_mount3;
 		if (!(sb->s_flags & MS_RDONLY) &&
 		    EXT4_SB(sb)->s_journal->j_failed_commit) {
-			printk(KERN_CRIT "EXT4-fs error (device %s): "
+			ext4_msg(sb, KERN_CRIT, "error: "
 			       "ext4_fill_super: Journal transaction "
-			       "%u is corrupt\n", sb->s_id,
+			       "%u is corrupt",
 			       EXT4_SB(sb)->s_journal->j_failed_commit);
 			if (test_opt(sb, ERRORS_RO)) {
-				printk(KERN_CRIT
-				       "Mounting filesystem read-only\n");
+				ext4_msg(sb, KERN_CRIT,
+				       "Mounting filesystem read-only");
 				sb->s_flags |= MS_RDONLY;
 				EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 				es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
@@ -2646,14 +2717,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 			if (test_opt(sb, ERRORS_PANIC)) {
 				EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 				es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
-				ext4_commit_super(sb, es, 1);
+				ext4_commit_super(sb, 1);
 				goto failed_mount4;
 			}
 		}
 	} else if (test_opt(sb, NOLOAD) && !(sb->s_flags & MS_RDONLY) &&
 	      EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
-		printk(KERN_ERR "EXT4-fs: required journal recovery "
-		       "suppressed and not mounted read-only\n");
+		ext4_msg(sb, KERN_ERR, "required journal recovery "
+		       "suppressed and not mounted read-only");
 		goto failed_mount4;
 	} else {
 		clear_opt(sbi->s_mount_opt, DATA_FLAGS);
@@ -2666,7 +2737,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	if (ext4_blocks_count(es) > 0xffffffffULL &&
 	    !jbd2_journal_set_features(EXT4_SB(sb)->s_journal, 0, 0,
 				       JBD2_FEATURE_INCOMPAT_64BIT)) {
-		printk(KERN_ERR "EXT4-fs: Failed to set 64-bit journal feature\n");
+		ext4_msg(sb, KERN_ERR, "Failed to set 64-bit journal feature");
 		goto failed_mount4;
 	}
 
@@ -2704,8 +2775,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	case EXT4_MOUNT_WRITEBACK_DATA:
 		if (!jbd2_journal_check_available_features
 		    (sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE)) {
-			printk(KERN_ERR "EXT4-fs: Journal does not support "
-			       "requested data journaling mode\n");
+			ext4_msg(sb, KERN_ERR, "Journal does not support "
+			       "requested data journaling mode");
 			goto failed_mount4;
 		}
 	default:
@@ -2717,8 +2788,8 @@ no_journal:
 
 	if (test_opt(sb, NOBH)) {
 		if (!(test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)) {
-			printk(KERN_WARNING "EXT4-fs: Ignoring nobh option - "
-				"its supported only with writeback mode\n");
+			ext4_msg(sb, KERN_WARNING, "Ignoring nobh option - "
+				"its supported only with writeback mode");
 			clear_opt(sbi->s_mount_opt, NOBH);
 		}
 	}
@@ -2729,18 +2800,18 @@ no_journal:
 
 	root = ext4_iget(sb, EXT4_ROOT_INO);
 	if (IS_ERR(root)) {
-		printk(KERN_ERR "EXT4-fs: get root inode failed\n");
+		ext4_msg(sb, KERN_ERR, "get root inode failed");
 		ret = PTR_ERR(root);
 		goto failed_mount4;
 	}
 	if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
 		iput(root);
-		printk(KERN_ERR "EXT4-fs: corrupt root inode, run e2fsck\n");
+		ext4_msg(sb, KERN_ERR, "corrupt root inode, run e2fsck");
 		goto failed_mount4;
 	}
 	sb->s_root = d_alloc_root(root);
 	if (!sb->s_root) {
-		printk(KERN_ERR "EXT4-fs: get root dentry failed\n");
+		ext4_msg(sb, KERN_ERR, "get root dentry failed");
 		iput(root);
 		ret = -ENOMEM;
 		goto failed_mount4;
@@ -2769,22 +2840,29 @@ no_journal:
 							sbi->s_inode_size) {
 		sbi->s_want_extra_isize = sizeof(struct ext4_inode) -
 						       EXT4_GOOD_OLD_INODE_SIZE;
-		printk(KERN_INFO "EXT4-fs: required extra inode space not"
-			"available.\n");
+		ext4_msg(sb, KERN_INFO, "required extra inode space not"
+			 "available");
 	}
 
 	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
-		printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - "
-				"requested data journaling mode\n");
+		ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
+			 "requested data journaling mode");
 		clear_opt(sbi->s_mount_opt, DELALLOC);
 	} else if (test_opt(sb, DELALLOC))
-		printk(KERN_INFO "EXT4-fs: delayed allocation enabled\n");
+		ext4_msg(sb, KERN_INFO, "delayed allocation enabled");
+
+	err = ext4_setup_system_zone(sb);
+	if (err) {
+		ext4_msg(sb, KERN_ERR, "failed to initialize system "
+			 "zone (%d)\n", err);
+		goto failed_mount4;
+	}
 
 	ext4_ext_init(sb);
 	err = ext4_mb_init(sb, needs_recovery);
 	if (err) {
-		printk(KERN_ERR "EXT4-fs: failed to initalize mballoc (%d)\n",
-		       err);
+		ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)",
+			 err);
 		goto failed_mount4;
 	}
 
@@ -2798,19 +2876,11 @@ no_journal:
 		goto failed_mount4;
 	};
 
-	/*
-	 * akpm: core read_super() calls in here with the superblock locked.
-	 * That deadlocks, because orphan cleanup needs to lock the superblock
-	 * in numerous places.  Here we just pop the lock - it's relatively
-	 * harmless, because we are now ready to accept write_super() requests,
-	 * and aviro says that's the only reason for hanging onto the
-	 * superblock lock.
-	 */
 	EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;
 	ext4_orphan_cleanup(sb, es);
 	EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
 	if (needs_recovery) {
-		printk(KERN_INFO "EXT4-fs: recovery complete.\n");
+		ext4_msg(sb, KERN_INFO, "recovery complete");
 		ext4_mark_recovery_complete(sb, es);
 	}
 	if (EXT4_SB(sb)->s_journal) {
@@ -2823,25 +2893,30 @@ no_journal:
 	} else
 		descr = "out journal";
 
-	printk(KERN_INFO "EXT4-fs: mounted filesystem %s with%s\n",
-	       sb->s_id, descr);
+	ext4_msg(sb, KERN_INFO, "mounted filesystem with%s", descr);
 
 	lock_kernel();
 	return 0;
 
 cantfind_ext4:
 	if (!silent)
-		printk(KERN_ERR "VFS: Can't find ext4 filesystem on dev %s.\n",
-		       sb->s_id);
+		ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
 	goto failed_mount;
 
 failed_mount4:
-	printk(KERN_ERR "EXT4-fs (device %s): mount failed\n", sb->s_id);
+	ext4_msg(sb, KERN_ERR, "mount failed");
+	ext4_release_system_zone(sb);
 	if (sbi->s_journal) {
 		jbd2_journal_destroy(sbi->s_journal);
 		sbi->s_journal = NULL;
 	}
 failed_mount3:
+	if (sbi->s_flex_groups) {
+		if (is_vmalloc_addr(sbi->s_flex_groups))
+			vfree(sbi->s_flex_groups);
+		else
+			kfree(sbi->s_flex_groups);
+	}
 	percpu_counter_destroy(&sbi->s_freeblocks_counter);
 	percpu_counter_destroy(&sbi->s_freeinodes_counter);
 	percpu_counter_destroy(&sbi->s_dirs_counter);
@@ -2862,6 +2937,7 @@ failed_mount:
 	brelse(bh);
 out_fail:
 	sb->s_fs_info = NULL;
+	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 	lock_kernel();
 	return ret;
@@ -2906,27 +2982,27 @@ static journal_t *ext4_get_journal(struct super_block *sb,
 
 	journal_inode = ext4_iget(sb, journal_inum);
 	if (IS_ERR(journal_inode)) {
-		printk(KERN_ERR "EXT4-fs: no journal found.\n");
+		ext4_msg(sb, KERN_ERR, "no journal found");
 		return NULL;
 	}
 	if (!journal_inode->i_nlink) {
 		make_bad_inode(journal_inode);
 		iput(journal_inode);
-		printk(KERN_ERR "EXT4-fs: journal inode is deleted.\n");
+		ext4_msg(sb, KERN_ERR, "journal inode is deleted");
 		return NULL;
 	}
 
 	jbd_debug(2, "Journal inode found at %p: %lld bytes\n",
 		  journal_inode, journal_inode->i_size);
 	if (!S_ISREG(journal_inode->i_mode)) {
-		printk(KERN_ERR "EXT4-fs: invalid journal inode.\n");
+		ext4_msg(sb, KERN_ERR, "invalid journal inode");
 		iput(journal_inode);
 		return NULL;
 	}
 
 	journal = jbd2_journal_init_inode(journal_inode);
 	if (!journal) {
-		printk(KERN_ERR "EXT4-fs: Could not load journal inode\n");
+		ext4_msg(sb, KERN_ERR, "Could not load journal inode");
 		iput(journal_inode);
 		return NULL;
 	}
@@ -2950,22 +3026,22 @@ static journal_t *ext4_get_dev_journal(struct super_block *sb,
 
 	BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
 
-	bdev = ext4_blkdev_get(j_dev);
+	bdev = ext4_blkdev_get(j_dev, sb);
 	if (bdev == NULL)
 		return NULL;
 
 	if (bd_claim(bdev, sb)) {
-		printk(KERN_ERR
-			"EXT4-fs: failed to claim external journal device.\n");
+		ext4_msg(sb, KERN_ERR,
+			"failed to claim external journal device");
 		blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 		return NULL;
 	}
 
 	blocksize = sb->s_blocksize;
-	hblock = bdev_hardsect_size(bdev);
+	hblock = bdev_logical_block_size(bdev);
 	if (blocksize < hblock) {
-		printk(KERN_ERR
-			"EXT4-fs: blocksize too small for journal device.\n");
+		ext4_msg(sb, KERN_ERR,
+			"blocksize too small for journal device");
 		goto out_bdev;
 	}
 
@@ -2973,8 +3049,8 @@ static journal_t *ext4_get_dev_journal(struct super_block *sb,
 	offset = EXT4_MIN_BLOCK_SIZE % blocksize;
 	set_blocksize(bdev, blocksize);
 	if (!(bh = __bread(bdev, sb_block, blocksize))) {
-		printk(KERN_ERR "EXT4-fs: couldn't read superblock of "
-		       "external journal\n");
+		ext4_msg(sb, KERN_ERR, "couldn't read superblock of "
+		       "external journal");
 		goto out_bdev;
 	}
 
@@ -2982,14 +3058,14 @@ static journal_t *ext4_get_dev_journal(struct super_block *sb,
 	if ((le16_to_cpu(es->s_magic) != EXT4_SUPER_MAGIC) ||
 	    !(le32_to_cpu(es->s_feature_incompat) &
 	      EXT4_FEATURE_INCOMPAT_JOURNAL_DEV)) {
-		printk(KERN_ERR "EXT4-fs: external journal has "
-					"bad superblock\n");
+		ext4_msg(sb, KERN_ERR, "external journal has "
+					"bad superblock");
 		brelse(bh);
 		goto out_bdev;
 	}
 
 	if (memcmp(EXT4_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
-		printk(KERN_ERR "EXT4-fs: journal UUID does not match\n");
+		ext4_msg(sb, KERN_ERR, "journal UUID does not match");
 		brelse(bh);
 		goto out_bdev;
 	}
@@ -3001,25 +3077,26 @@ static journal_t *ext4_get_dev_journal(struct super_block *sb,
 	journal = jbd2_journal_init_dev(bdev, sb->s_bdev,
 					start, len, blocksize);
 	if (!journal) {
-		printk(KERN_ERR "EXT4-fs: failed to create device journal\n");
+		ext4_msg(sb, KERN_ERR, "failed to create device journal");
 		goto out_bdev;
 	}
 	journal->j_private = sb;
 	ll_rw_block(READ, 1, &journal->j_sb_buffer);
 	wait_on_buffer(journal->j_sb_buffer);
 	if (!buffer_uptodate(journal->j_sb_buffer)) {
-		printk(KERN_ERR "EXT4-fs: I/O error on journal device\n");
+		ext4_msg(sb, KERN_ERR, "I/O error on journal device");
 		goto out_journal;
 	}
 	if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
-		printk(KERN_ERR "EXT4-fs: External journal has more than one "
-					"user (unsupported) - %d\n",
+		ext4_msg(sb, KERN_ERR, "External journal has more than one "
+					"user (unsupported) - %d",
 			be32_to_cpu(journal->j_superblock->s_nr_users));
 		goto out_journal;
 	}
 	EXT4_SB(sb)->journal_bdev = bdev;
 	ext4_init_journal_params(sb, journal);
 	return journal;
+
 out_journal:
 	jbd2_journal_destroy(journal);
 out_bdev:
@@ -3041,8 +3118,8 @@ static int ext4_load_journal(struct super_block *sb,
 
 	if (journal_devnum &&
 	    journal_devnum != le32_to_cpu(es->s_journal_dev)) {
-		printk(KERN_INFO "EXT4-fs: external journal device major/minor "
-			"numbers have changed\n");
+		ext4_msg(sb, KERN_INFO, "external journal device major/minor "
+			"numbers have changed");
 		journal_dev = new_decode_dev(journal_devnum);
 	} else
 		journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
@@ -3054,24 +3131,23 @@ static int ext4_load_journal(struct super_block *sb,
 	 * crash?  For recovery, we need to check in advance whether we
 	 * can get read-write access to the device.
 	 */
-
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
 		if (sb->s_flags & MS_RDONLY) {
-			printk(KERN_INFO "EXT4-fs: INFO: recovery "
-					"required on readonly filesystem.\n");
+			ext4_msg(sb, KERN_INFO, "INFO: recovery "
+					"required on readonly filesystem");
 			if (really_read_only) {
-				printk(KERN_ERR "EXT4-fs: write access "
-					"unavailable, cannot proceed.\n");
+				ext4_msg(sb, KERN_ERR, "write access "
+					"unavailable, cannot proceed");
 				return -EROFS;
 			}
-			printk(KERN_INFO "EXT4-fs: write access will "
-			       "be enabled during recovery.\n");
+			ext4_msg(sb, KERN_INFO, "write access will "
+			       "be enabled during recovery");
 		}
 	}
 
 	if (journal_inum && journal_dev) {
-		printk(KERN_ERR "EXT4-fs: filesystem has both journal "
-		       "and inode journals!\n");
+		ext4_msg(sb, KERN_ERR, "filesystem has both journal "
+		       "and inode journals!");
 		return -EINVAL;
 	}
 
@@ -3084,14 +3160,14 @@ static int ext4_load_journal(struct super_block *sb,
 	}
 
 	if (journal->j_flags & JBD2_BARRIER)
-		printk(KERN_INFO "EXT4-fs: barriers enabled\n");
+		ext4_msg(sb, KERN_INFO, "barriers enabled");
 	else
-		printk(KERN_INFO "EXT4-fs: barriers disabled\n");
+		ext4_msg(sb, KERN_INFO, "barriers disabled");
 
 	if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
 		err = jbd2_journal_update_format(journal);
 		if (err)  {
-			printk(KERN_ERR "EXT4-fs: error updating journal.\n");
+			ext4_msg(sb, KERN_ERR, "error updating journal");
 			jbd2_journal_destroy(journal);
 			return err;
 		}
@@ -3103,7 +3179,7 @@ static int ext4_load_journal(struct super_block *sb,
 		err = jbd2_journal_load(journal);
 
 	if (err) {
-		printk(KERN_ERR "EXT4-fs: error loading journal.\n");
+		ext4_msg(sb, KERN_ERR, "error loading journal");
 		jbd2_journal_destroy(journal);
 		return err;
 	}
@@ -3114,18 +3190,17 @@ static int ext4_load_journal(struct super_block *sb,
 	if (journal_devnum &&
 	    journal_devnum != le32_to_cpu(es->s_journal_dev)) {
 		es->s_journal_dev = cpu_to_le32(journal_devnum);
-		sb->s_dirt = 1;
 
 		/* Make sure we flush the recovery flag to disk. */
-		ext4_commit_super(sb, es, 1);
+		ext4_commit_super(sb, 1);
 	}
 
 	return 0;
 }
 
-static int ext4_commit_super(struct super_block *sb,
-			      struct ext4_super_block *es, int sync)
+static int ext4_commit_super(struct super_block *sb, int sync)
 {
+	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
 	struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
 	int error = 0;
 
@@ -3140,8 +3215,8 @@ static int ext4_commit_super(struct super_block *sb,
 		 * be remapped.  Nothing we can do but to retry the
 		 * write and hope for the best.
 		 */
-		printk(KERN_ERR "EXT4-fs: previous I/O error to "
-		       "superblock detected for %s.\n", sb->s_id);
+		ext4_msg(sb, KERN_ERR, "previous I/O error to "
+		       "superblock detected");
 		clear_buffer_write_io_error(sbh);
 		set_buffer_uptodate(sbh);
 	}
@@ -3154,7 +3229,7 @@ static int ext4_commit_super(struct super_block *sb,
 					&EXT4_SB(sb)->s_freeblocks_counter));
 	es->s_free_inodes_count = cpu_to_le32(percpu_counter_sum_positive(
 					&EXT4_SB(sb)->s_freeinodes_counter));
-
+	sb->s_dirt = 0;
 	BUFFER_TRACE(sbh, "marking dirty");
 	mark_buffer_dirty(sbh);
 	if (sync) {
@@ -3164,8 +3239,8 @@ static int ext4_commit_super(struct super_block *sb,
 
 		error = buffer_write_io_error(sbh);
 		if (error) {
-			printk(KERN_ERR "EXT4-fs: I/O error while writing "
-			       "superblock for %s.\n", sb->s_id);
+			ext4_msg(sb, KERN_ERR, "I/O error while writing "
+			       "superblock");
 			clear_buffer_write_io_error(sbh);
 			set_buffer_uptodate(sbh);
 		}
@@ -3173,7 +3248,6 @@ static int ext4_commit_super(struct super_block *sb,
 	return error;
 }
 
-
 /*
  * Have we just finished recovery?  If so, and if we are mounting (or
  * remounting) the filesystem readonly, then we will end up with a
@@ -3192,14 +3266,11 @@ static void ext4_mark_recovery_complete(struct super_block *sb,
 	if (jbd2_journal_flush(journal) < 0)
 		goto out;
 
-	lock_super(sb);
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER) &&
 	    sb->s_flags & MS_RDONLY) {
 		EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
-		sb->s_dirt = 0;
-		ext4_commit_super(sb, es, 1);
+		ext4_commit_super(sb, 1);
 	}
-	unlock_super(sb);
 
 out:
 	jbd2_journal_unlock_updates(journal);
@@ -3238,7 +3309,7 @@ static void ext4_clear_journal_err(struct super_block *sb,
 
 		EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
 		es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
-		ext4_commit_super(sb, es, 1);
+		ext4_commit_super(sb, 1);
 
 		jbd2_journal_clear_err(journal);
 	}
@@ -3257,29 +3328,17 @@ int ext4_force_commit(struct super_block *sb)
 		return 0;
 
 	journal = EXT4_SB(sb)->s_journal;
-	if (journal) {
-		sb->s_dirt = 0;
+	if (journal)
 		ret = ext4_journal_force_commit(journal);
-	}
 
 	return ret;
 }
 
-/*
- * Ext4 always journals updates to the superblock itself, so we don't
- * have to propagate any other updates to the superblock on disk at this
- * point.  (We can probably nuke this function altogether, and remove
- * any mention to sb->s_dirt in all of fs/ext4; eventual cleanup...)
- */
 static void ext4_write_super(struct super_block *sb)
 {
-	if (EXT4_SB(sb)->s_journal) {
-		if (mutex_trylock(&sb->s_lock) != 0)
-			BUG();
-		sb->s_dirt = 0;
-	} else {
-		ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
-	}
+	lock_super(sb);
+	ext4_commit_super(sb, 1);
+	unlock_super(sb);
 }
 
 static int ext4_sync_fs(struct super_block *sb, int wait)
@@ -3288,16 +3347,9 @@ static int ext4_sync_fs(struct super_block *sb, int wait)
 	tid_t target;
 
 	trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait);
-	sb->s_dirt = 0;
-	if (EXT4_SB(sb)->s_journal) {
-		if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal,
-					      &target)) {
-			if (wait)
-				jbd2_log_wait_commit(EXT4_SB(sb)->s_journal,
-						     target);
-		}
-	} else {
-		ext4_commit_super(sb, EXT4_SB(sb)->s_es, wait);
+	if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
+		if (wait)
+			jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
 	}
 	return ret;
 }
@@ -3310,34 +3362,32 @@ static int ext4_freeze(struct super_block *sb)
 {
 	int error = 0;
 	journal_t *journal;
-	sb->s_dirt = 0;
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		journal = EXT4_SB(sb)->s_journal;
+	if (sb->s_flags & MS_RDONLY)
+		return 0;
 
-		if (journal) {
-			/* Now we set up the journal barrier. */
-			jbd2_journal_lock_updates(journal);
+	journal = EXT4_SB(sb)->s_journal;
 
-			/*
-			 * We don't want to clear needs_recovery flag when we
-			 * failed to flush the journal.
-			 */
-			error = jbd2_journal_flush(journal);
-			if (error < 0)
-				goto out;
-		}
+	/* Now we set up the journal barrier. */
+	jbd2_journal_lock_updates(journal);
 
-		/* Journal blocked and flushed, clear needs_recovery flag. */
-		EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
-		error = ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
-		if (error)
-			goto out;
+	/*
+	 * Don't clear the needs_recovery flag if we failed to flush
+	 * the journal.
+	 */
+	error = jbd2_journal_flush(journal);
+	if (error < 0) {
+	out:
+		jbd2_journal_unlock_updates(journal);
+		return error;
 	}
+
+	/* Journal blocked and flushed, clear needs_recovery flag. */
+	EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+	error = ext4_commit_super(sb, 1);
+	if (error)
+		goto out;
 	return 0;
-out:
-	jbd2_journal_unlock_updates(journal);
-	return error;
 }
 
 /*
@@ -3346,14 +3396,15 @@ out:
  */
 static int ext4_unfreeze(struct super_block *sb)
 {
-	if (EXT4_SB(sb)->s_journal && !(sb->s_flags & MS_RDONLY)) {
-		lock_super(sb);
-		/* Reser the needs_recovery flag before the fs is unlocked. */
-		EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
-		ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
-		unlock_super(sb);
-		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
-	}
+	if (sb->s_flags & MS_RDONLY)
+		return 0;
+
+	lock_super(sb);
+	/* Reset the needs_recovery flag before the fs is unlocked. */
+	EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
+	ext4_commit_super(sb, 1);
+	unlock_super(sb);
+	jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
 	return 0;
 }
 
@@ -3371,7 +3422,10 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	int i;
 #endif
 
+	lock_kernel();
+
 	/* Store the original options */
+	lock_super(sb);
 	old_sb_flags = sb->s_flags;
 	old_opts.s_mount_opt = sbi->s_mount_opt;
 	old_opts.s_resuid = sbi->s_resuid;
@@ -3432,22 +3486,15 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 			    (sbi->s_mount_state & EXT4_VALID_FS))
 				es->s_state = cpu_to_le16(sbi->s_mount_state);
 
-			/*
-			 * We have to unlock super so that we can wait for
-			 * transactions.
-			 */
-			if (sbi->s_journal) {
-				unlock_super(sb);
+			if (sbi->s_journal)
 				ext4_mark_recovery_complete(sb, es);
-				lock_super(sb);
-			}
 		} else {
 			int ret;
 			if ((ret = EXT4_HAS_RO_COMPAT_FEATURE(sb,
 					~EXT4_FEATURE_RO_COMPAT_SUPP))) {
-				printk(KERN_WARNING "EXT4-fs: %s: couldn't "
+				ext4_msg(sb, KERN_WARNING, "couldn't "
 				       "remount RDWR because of unsupported "
-				       "optional features (%x).\n", sb->s_id,
+				       "optional features (%x)",
 				(le32_to_cpu(sbi->s_es->s_feature_ro_compat) &
 					~EXT4_FEATURE_RO_COMPAT_SUPP));
 				err = -EROFS;
@@ -3456,17 +3503,15 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 
 			/*
 			 * Make sure the group descriptor checksums
-			 * are sane.  If they aren't, refuse to
-			 * remount r/w.
+			 * are sane.  If they aren't, refuse to remount r/w.
 			 */
 			for (g = 0; g < sbi->s_groups_count; g++) {
 				struct ext4_group_desc *gdp =
 					ext4_get_group_desc(sb, g, NULL);
 
 				if (!ext4_group_desc_csum_verify(sbi, g, gdp)) {
-					printk(KERN_ERR
-	       "EXT4-fs: ext4_remount: "
-		"Checksum for group %u failed (%u!=%u)\n",
+					ext4_msg(sb, KERN_ERR,
+	       "ext4_remount: Checksum for group %u failed (%u!=%u)",
 		g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)),
 					       le16_to_cpu(gdp->bg_checksum));
 					err = -EINVAL;
@@ -3480,11 +3525,10 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 			 * require a full umount/remount for now.
 			 */
 			if (es->s_last_orphan) {
-				printk(KERN_WARNING "EXT4-fs: %s: couldn't "
+				ext4_msg(sb, KERN_WARNING, "Couldn't "
 				       "remount RDWR because of unprocessed "
 				       "orphan inode list.  Please "
-				       "umount/remount instead.\n",
-				       sb->s_id);
+				       "umount/remount instead");
 				err = -EINVAL;
 				goto restore_opts;
 			}
@@ -3504,8 +3548,9 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 				sb->s_flags &= ~MS_RDONLY;
 		}
 	}
+	ext4_setup_system_zone(sb);
 	if (sbi->s_journal == NULL)
-		ext4_commit_super(sb, es, 1);
+		ext4_commit_super(sb, 1);
 
 #ifdef CONFIG_QUOTA
 	/* Release old quota file names */
@@ -3514,7 +3559,10 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 		    old_opts.s_qf_names[i] != sbi->s_qf_names[i])
 			kfree(old_opts.s_qf_names[i]);
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return 0;
+
 restore_opts:
 	sb->s_flags = old_sb_flags;
 	sbi->s_mount_opt = old_opts.s_mount_opt;
@@ -3532,6 +3580,8 @@ restore_opts:
 		sbi->s_qf_names[i] = old_opts.s_qf_names[i];
 	}
 #endif
+	unlock_super(sb);
+	unlock_kernel();
 	return err;
 }
 
@@ -3545,9 +3595,8 @@ static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
 	if (test_opt(sb, MINIX_DF)) {
 		sbi->s_overhead_last = 0;
 	} else if (sbi->s_blocks_last != ext4_blocks_count(es)) {
-		ext4_group_t ngroups = sbi->s_groups_count, i;
+		ext4_group_t i, ngroups = ext4_get_groups_count(sb);
 		ext4_fsblk_t overhead = 0;
-		smp_rmb();
 
 		/*
 		 * Compute the overhead (FS structures).  This is constant
@@ -3599,11 +3648,12 @@ static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
 	       le64_to_cpup((void *)es->s_uuid + sizeof(u64));
 	buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
 	buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
+
 	return 0;
 }
 
-/* Helper function for writing quotas on sync - we need to start transaction before quota file
- * is locked for write. Otherwise the are possible deadlocks:
+/* Helper function for writing quotas on sync - we need to start transaction
+ * before quota file is locked for write. Otherwise the are possible deadlocks:
  * Process 1                         Process 2
  * ext4_create()                     quota_sync()
  *   jbd2_journal_start()                  write_dquot()
@@ -3627,7 +3677,7 @@ static int ext4_write_dquot(struct dquot *dquot)
 
 	inode = dquot_to_inode(dquot);
 	handle = ext4_journal_start(inode,
-					EXT4_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
+				    EXT4_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
 	if (IS_ERR(handle))
 		return PTR_ERR(handle);
 	ret = dquot_commit(dquot);
@@ -3643,7 +3693,7 @@ static int ext4_acquire_dquot(struct dquot *dquot)
 	handle_t *handle;
 
 	handle = ext4_journal_start(dquot_to_inode(dquot),
-					EXT4_QUOTA_INIT_BLOCKS(dquot->dq_sb));
+				    EXT4_QUOTA_INIT_BLOCKS(dquot->dq_sb));
 	if (IS_ERR(handle))
 		return PTR_ERR(handle);
 	ret = dquot_acquire(dquot);
@@ -3659,7 +3709,7 @@ static int ext4_release_dquot(struct dquot *dquot)
 	handle_t *handle;
 
 	handle = ext4_journal_start(dquot_to_inode(dquot),
-					EXT4_QUOTA_DEL_BLOCKS(dquot->dq_sb));
+				    EXT4_QUOTA_DEL_BLOCKS(dquot->dq_sb));
 	if (IS_ERR(handle)) {
 		/* Release dquot anyway to avoid endless cycle in dqput() */
 		dquot_release(dquot);
@@ -3707,7 +3757,7 @@ static int ext4_write_info(struct super_block *sb, int type)
 static int ext4_quota_on_mount(struct super_block *sb, int type)
 {
 	return vfs_quota_on_mount(sb, EXT4_SB(sb)->s_qf_names[type],
-			EXT4_SB(sb)->s_jquota_fmt, type);
+				  EXT4_SB(sb)->s_jquota_fmt, type);
 }
 
 /*
@@ -3738,9 +3788,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 	if (EXT4_SB(sb)->s_qf_names[type]) {
 		/* Quotafile not in fs root? */
 		if (path.dentry->d_parent != sb->s_root)
-			printk(KERN_WARNING
-				"EXT4-fs: Quota file not on filesystem root. "
-				"Journaled quota will not work.\n");
+			ext4_msg(sb, KERN_WARNING,
+				"Quota file not on filesystem root. "
+				"Journaled quota will not work");
 	}
 
 	/*
@@ -3823,8 +3873,8 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type,
 	handle_t *handle = journal_current_handle();
 
 	if (EXT4_SB(sb)->s_journal && !handle) {
-		printk(KERN_WARNING "EXT4-fs: Quota write (off=%llu, len=%llu)"
-			" cancelled because transaction is not started.\n",
+		ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
+			" cancelled because transaction is not started",
 			(unsigned long long)off, (unsigned long long)len);
 		return -EIO;
 	}
@@ -3878,10 +3928,10 @@ out:
 
 #endif
 
-static int ext4_get_sb(struct file_system_type *fs_type,
-	int flags, const char *dev_name, void *data, struct vfsmount *mnt)
+static int ext4_get_sb(struct file_system_type *fs_type, int flags,
+		       const char *dev_name, void *data, struct vfsmount *mnt)
 {
-	return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super, mnt);
+	return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
 }
 
 static struct file_system_type ext4_fs_type = {
@@ -3893,14 +3943,14 @@ static struct file_system_type ext4_fs_type = {
 };
 
 #ifdef CONFIG_EXT4DEV_COMPAT
-static int ext4dev_get_sb(struct file_system_type *fs_type,
-	int flags, const char *dev_name, void *data, struct vfsmount *mnt)
+static int ext4dev_get_sb(struct file_system_type *fs_type, int flags,
+			  const char *dev_name, void *data,struct vfsmount *mnt)
 {
-	printk(KERN_WARNING "EXT4-fs: Update your userspace programs "
-	       "to mount using ext4\n");
-	printk(KERN_WARNING "EXT4-fs: ext4dev backwards compatibility "
-	       "will go away by 2.6.31\n");
-	return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super, mnt);
+	printk(KERN_WARNING "EXT4-fs (%s): Update your userspace programs "
+	       "to mount using ext4\n", dev_name);
+	printk(KERN_WARNING "EXT4-fs (%s): ext4dev backwards compatibility "
+	       "will go away by 2.6.31\n", dev_name);
+	return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
 }
 
 static struct file_system_type ext4dev_fs_type = {
@@ -3917,13 +3967,16 @@ static int __init init_ext4_fs(void)
 {
 	int err;
 
+	err = init_ext4_system_zone();
+	if (err)
+		return err;
 	ext4_kset = kset_create_and_add("ext4", NULL, fs_kobj);
 	if (!ext4_kset)
-		return -ENOMEM;
+		goto out4;
 	ext4_proc_root = proc_mkdir("fs/ext4", NULL);
 	err = init_ext4_mballoc();
 	if (err)
-		return err;
+		goto out3;
 
 	err = init_ext4_xattr();
 	if (err)
@@ -3948,6 +4001,11 @@ out1:
 	exit_ext4_xattr();
 out2:
 	exit_ext4_mballoc();
+out3:
+	remove_proc_entry("fs/ext4", NULL);
+	kset_unregister(ext4_kset);
+out4:
+	exit_ext4_system_zone();
 	return err;
 }
 
@@ -3962,6 +4020,7 @@ static void __exit exit_ext4_fs(void)
 	exit_ext4_mballoc();
 	remove_proc_entry("fs/ext4", NULL);
 	kset_unregister(ext4_kset);
+	exit_ext4_system_zone();
 }
 
 MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 3a7f603b698..f3500294eec 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -840,7 +840,7 @@ const struct file_operations fat_dir_operations = {
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= fat_compat_dir_ioctl,
 #endif
-	.fsync		= file_fsync,
+	.fsync		= fat_file_fsync,
 };
 
 static int fat_get_short_entry(struct inode *dir, loff_t *pos,
@@ -967,7 +967,7 @@ static int __fat_remove_entries(struct inode *dir, loff_t pos, int nr_slots)
 			de++;
 			nr_slots--;
 		}
-		mark_buffer_dirty(bh);
+		mark_buffer_dirty_inode(bh, dir);
 		if (IS_DIRSYNC(dir))
 			err = sync_dirty_buffer(bh);
 		brelse(bh);
@@ -1001,7 +1001,7 @@ int fat_remove_entries(struct inode *dir, struct fat_slot_info *sinfo)
 		de--;
 		nr_slots--;
 	}
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	if (IS_DIRSYNC(dir))
 		err = sync_dirty_buffer(bh);
 	brelse(bh);
@@ -1051,7 +1051,7 @@ static int fat_zeroed_cluster(struct inode *dir, sector_t blknr, int nr_used,
 		}
 		memset(bhs[n]->b_data, 0, sb->s_blocksize);
 		set_buffer_uptodate(bhs[n]);
-		mark_buffer_dirty(bhs[n]);
+		mark_buffer_dirty_inode(bhs[n], dir);
 
 		n++;
 		blknr++;
@@ -1131,7 +1131,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 	de[0].size = de[1].size = 0;
 	memset(de + 2, 0, sb->s_blocksize - 2 * sizeof(*de));
 	set_buffer_uptodate(bhs[0]);
-	mark_buffer_dirty(bhs[0]);
+	mark_buffer_dirty_inode(bhs[0], dir);
 
 	err = fat_zeroed_cluster(dir, blknr, 1, bhs, MAX_BUF_PER_PAGE);
 	if (err)
@@ -1193,7 +1193,7 @@ static int fat_add_new_entries(struct inode *dir, void *slots, int nr_slots,
 			slots += copy;
 			size -= copy;
 			set_buffer_uptodate(bhs[n]);
-			mark_buffer_dirty(bhs[n]);
+			mark_buffer_dirty_inode(bhs[n], dir);
 			if (!size)
 				break;
 			n++;
@@ -1293,7 +1293,7 @@ found:
 		for (i = 0; i < long_bhs; i++) {
 			int copy = min_t(int, sb->s_blocksize - offset, size);
 			memcpy(bhs[i]->b_data + offset, slots, copy);
-			mark_buffer_dirty(bhs[i]);
+			mark_buffer_dirty_inode(bhs[i], dir);
 			offset = 0;
 			slots += copy;
 			size -= copy;
@@ -1304,7 +1304,7 @@ found:
 			/* Fill the short name slot. */
 			int copy = min_t(int, sb->s_blocksize - offset, size);
 			memcpy(bhs[i]->b_data + offset, slots, copy);
-			mark_buffer_dirty(bhs[i]);
+			mark_buffer_dirty_inode(bhs[i], dir);
 			if (IS_DIRSYNC(dir))
 				err = sync_dirty_buffer(bhs[i]);
 		}
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index ea440d65819..e4d88527b5d 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -74,6 +74,7 @@ struct msdos_sb_info {
 
 	int fatent_shift;
 	struct fatent_operations *fatent_ops;
+	struct inode *fat_inode;
 
 	spinlock_t inode_hash_lock;
 	struct hlist_head inode_hashtable[FAT_HASH_SIZE];
@@ -251,6 +252,7 @@ struct fat_entry {
 	} u;
 	int nr_bhs;
 	struct buffer_head *bhs[2];
+	struct inode *fat_inode;
 };
 
 static inline void fatent_init(struct fat_entry *fatent)
@@ -259,6 +261,7 @@ static inline void fatent_init(struct fat_entry *fatent)
 	fatent->entry = 0;
 	fatent->u.ent32_p = NULL;
 	fatent->bhs[0] = fatent->bhs[1] = NULL;
+	fatent->fat_inode = NULL;
 }
 
 static inline void fatent_set_entry(struct fat_entry *fatent, int entry)
@@ -275,6 +278,7 @@ static inline void fatent_brelse(struct fat_entry *fatent)
 		brelse(fatent->bhs[i]);
 	fatent->nr_bhs = 0;
 	fatent->bhs[0] = fatent->bhs[1] = NULL;
+	fatent->fat_inode = NULL;
 }
 
 extern void fat_ent_access_init(struct super_block *sb);
@@ -296,6 +300,8 @@ extern int fat_setattr(struct dentry * dentry, struct iattr * attr);
 extern void fat_truncate(struct inode *inode);
 extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		       struct kstat *stat);
+extern int fat_file_fsync(struct file *file, struct dentry *dentry,
+			  int datasync);
 
 /* fat/inode.c */
 extern void fat_attach(struct inode *inode, loff_t i_pos);
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index da6eea47872..618f5305c2e 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -73,6 +73,8 @@ static int fat12_ent_bread(struct super_block *sb, struct fat_entry *fatent,
 	struct buffer_head **bhs = fatent->bhs;
 
 	WARN_ON(blocknr < MSDOS_SB(sb)->fat_start);
+	fatent->fat_inode = MSDOS_SB(sb)->fat_inode;
+
 	bhs[0] = sb_bread(sb, blocknr);
 	if (!bhs[0])
 		goto err;
@@ -103,6 +105,7 @@ static int fat_ent_bread(struct super_block *sb, struct fat_entry *fatent,
 	struct fatent_operations *ops = MSDOS_SB(sb)->fatent_ops;
 
 	WARN_ON(blocknr < MSDOS_SB(sb)->fat_start);
+	fatent->fat_inode = MSDOS_SB(sb)->fat_inode;
 	fatent->bhs[0] = sb_bread(sb, blocknr);
 	if (!fatent->bhs[0]) {
 		printk(KERN_ERR "FAT: FAT read failed (blocknr %llu)\n",
@@ -167,9 +170,9 @@ static void fat12_ent_put(struct fat_entry *fatent, int new)
 	}
 	spin_unlock(&fat12_entry_lock);
 
-	mark_buffer_dirty(fatent->bhs[0]);
+	mark_buffer_dirty_inode(fatent->bhs[0], fatent->fat_inode);
 	if (fatent->nr_bhs == 2)
-		mark_buffer_dirty(fatent->bhs[1]);
+		mark_buffer_dirty_inode(fatent->bhs[1], fatent->fat_inode);
 }
 
 static void fat16_ent_put(struct fat_entry *fatent, int new)
@@ -178,7 +181,7 @@ static void fat16_ent_put(struct fat_entry *fatent, int new)
 		new = EOF_FAT16;
 
 	*fatent->u.ent16_p = cpu_to_le16(new);
-	mark_buffer_dirty(fatent->bhs[0]);
+	mark_buffer_dirty_inode(fatent->bhs[0], fatent->fat_inode);
 }
 
 static void fat32_ent_put(struct fat_entry *fatent, int new)
@@ -189,7 +192,7 @@ static void fat32_ent_put(struct fat_entry *fatent, int new)
 	WARN_ON(new & 0xf0000000);
 	new |= le32_to_cpu(*fatent->u.ent32_p) & ~0x0fffffff;
 	*fatent->u.ent32_p = cpu_to_le32(new);
-	mark_buffer_dirty(fatent->bhs[0]);
+	mark_buffer_dirty_inode(fatent->bhs[0], fatent->fat_inode);
 }
 
 static int fat12_ent_next(struct fat_entry *fatent)
@@ -381,7 +384,7 @@ static int fat_mirror_bhs(struct super_block *sb, struct buffer_head **bhs,
 			}
 			memcpy(c_bh->b_data, bhs[n]->b_data, sb->s_blocksize);
 			set_buffer_uptodate(c_bh);
-			mark_buffer_dirty(c_bh);
+			mark_buffer_dirty_inode(c_bh, sbi->fat_inode);
 			if (sb->s_flags & MS_SYNCHRONOUS)
 				err = sync_dirty_buffer(c_bh);
 			brelse(c_bh);
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 0a7f4a9918b..e955a56b4e5 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -133,6 +133,18 @@ static int fat_file_release(struct inode *inode, struct file *filp)
 	return 0;
 }
 
+int fat_file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+{
+	struct inode *inode = dentry->d_inode;
+	int res, err;
+
+	res = simple_fsync(filp, dentry, datasync);
+	err = sync_mapping_buffers(MSDOS_SB(inode->i_sb)->fat_inode->i_mapping);
+
+	return res ? res : err;
+}
+
+
 const struct file_operations fat_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
@@ -142,7 +154,7 @@ const struct file_operations fat_file_operations = {
 	.mmap		= generic_file_mmap,
 	.release	= fat_file_release,
 	.ioctl		= fat_generic_ioctl,
-	.fsync		= file_fsync,
+	.fsync		= fat_file_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 296785a0dec..51a5ecf9000 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -441,16 +441,35 @@ static void fat_clear_inode(struct inode *inode)
 
 static void fat_write_super(struct super_block *sb)
 {
+	lock_super(sb);
 	sb->s_dirt = 0;
 
 	if (!(sb->s_flags & MS_RDONLY))
 		fat_clusters_flush(sb);
+	unlock_super(sb);
+}
+
+static int fat_sync_fs(struct super_block *sb, int wait)
+{
+	lock_super(sb);
+	fat_clusters_flush(sb);
+	sb->s_dirt = 0;
+	unlock_super(sb);
+
+	return 0;
 }
 
 static void fat_put_super(struct super_block *sb)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		fat_write_super(sb);
+
+	iput(sbi->fat_inode);
+
 	if (sbi->nls_disk) {
 		unload_nls(sbi->nls_disk);
 		sbi->nls_disk = NULL;
@@ -467,6 +486,8 @@ static void fat_put_super(struct super_block *sb)
 
 	sb->s_fs_info = NULL;
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 static struct kmem_cache *fat_inode_cachep;
@@ -632,6 +653,7 @@ static const struct super_operations fat_sops = {
 	.delete_inode	= fat_delete_inode,
 	.put_super	= fat_put_super,
 	.write_super	= fat_write_super,
+	.sync_fs	= fat_sync_fs,
 	.statfs		= fat_statfs,
 	.clear_inode	= fat_clear_inode,
 	.remount_fs	= fat_remount,
@@ -1174,7 +1196,7 @@ static int fat_read_root(struct inode *inode)
 int fat_fill_super(struct super_block *sb, void *data, int silent,
 		   const struct inode_operations *fs_dir_inode_ops, int isvfat)
 {
-	struct inode *root_inode = NULL;
+	struct inode *root_inode = NULL, *fat_inode = NULL;
 	struct buffer_head *bh;
 	struct fat_boot_sector *b;
 	struct msdos_sb_info *sbi;
@@ -1414,6 +1436,11 @@ int fat_fill_super(struct super_block *sb, void *data, int silent,
 	}
 
 	error = -ENOMEM;
+	fat_inode = new_inode(sb);
+	if (!fat_inode)
+		goto out_fail;
+	MSDOS_I(fat_inode)->i_pos = 0;
+	sbi->fat_inode = fat_inode;
 	root_inode = new_inode(sb);
 	if (!root_inode)
 		goto out_fail;
@@ -1439,6 +1466,8 @@ out_invalid:
 		       " on dev %s.\n", sb->s_id);
 
 out_fail:
+	if (fat_inode)
+		iput(fat_inode);
 	if (root_inode)
 		iput(root_inode);
 	if (sbi->nls_io)
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index da3f361a37d..20f52286135 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -544,7 +544,7 @@ static int do_msdos_rename(struct inode *old_dir, unsigned char *old_name,
 		int start = MSDOS_I(new_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		if (IS_DIRSYNC(new_dir)) {
 			err = sync_dirty_buffer(dotdot_bh);
 			if (err)
@@ -586,7 +586,7 @@ error_dotdot:
 		int start = MSDOS_I(old_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		corrupt |= sync_dirty_buffer(dotdot_bh);
 	}
 error_inode:
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index a0e00e3a46e..b50ecbe97f8 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -965,7 +965,7 @@ static int vfat_rename(struct inode *old_dir, struct dentry *old_dentry,
 		int start = MSDOS_I(new_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		if (IS_DIRSYNC(new_dir)) {
 			err = sync_dirty_buffer(dotdot_bh);
 			if (err)
@@ -1009,7 +1009,7 @@ error_dotdot:
 		int start = MSDOS_I(old_dir)->i_logstart;
 		dotdot_de->start = cpu_to_le16(start);
 		dotdot_de->starthi = cpu_to_le16(start >> 16);
-		mark_buffer_dirty(dotdot_bh);
+		mark_buffer_dirty_inode(dotdot_bh, old_inode);
 		corrupt |= sync_dirty_buffer(dotdot_bh);
 	}
 error_inode:
diff --git a/fs/file_table.c b/fs/file_table.c
index 54018fe4884..334ce39881f 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -214,7 +214,7 @@ int init_file(struct file *file, struct vfsmount *mnt, struct dentry *dentry,
 	 */
 	if ((mode & FMODE_WRITE) && !special_file(dentry->d_inode->i_mode)) {
 		file_take_write(file);
-		error = mnt_want_write(mnt);
+		error = mnt_clone_write(mnt);
 		WARN_ON(error);
 	}
 	return error;
@@ -399,6 +399,44 @@ too_bad:
 	return 0;
 }
 
+/**
+ *	mark_files_ro - mark all files read-only
+ *	@sb: superblock in question
+ *
+ *	All files are marked read-only.  We don't care about pending
+ *	delete files so this should be used in 'force' mode only.
+ */
+void mark_files_ro(struct super_block *sb)
+{
+	struct file *f;
+
+retry:
+	file_list_lock();
+	list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
+		struct vfsmount *mnt;
+		if (!S_ISREG(f->f_path.dentry->d_inode->i_mode))
+		       continue;
+		if (!file_count(f))
+			continue;
+		if (!(f->f_mode & FMODE_WRITE))
+			continue;
+		f->f_mode &= ~FMODE_WRITE;
+		if (file_check_writeable(f) != 0)
+			continue;
+		file_release_write(f);
+		mnt = mntget(f->f_path.mnt);
+		file_list_unlock();
+		/*
+		 * This can sleep, so we can't hold
+		 * the file_list_lock() spinlock.
+		 */
+		mnt_drop_write(mnt);
+		mntput(mnt);
+		goto retry;
+	}
+	file_list_unlock();
+}
+
 void __init files_init(unsigned long mempages)
 { 
 	int n; 
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 1dacda83157..cdbd1654e4c 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -80,12 +80,16 @@ vxfs_put_super(struct super_block *sbp)
 {
 	struct vxfs_sb_info	*infp = VXFS_SBI(sbp);
 
+	lock_kernel();
+
 	vxfs_put_fake_inode(infp->vsi_fship);
 	vxfs_put_fake_inode(infp->vsi_ilist);
 	vxfs_put_fake_inode(infp->vsi_stilist);
 
 	brelse(infp->vsi_bp);
 	kfree(infp);
+
+	unlock_kernel();
 }
 
 /**
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 91013ff7dd5..40308e98c6a 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -64,6 +64,28 @@ static void writeback_release(struct backing_dev_info *bdi)
 	clear_bit(BDI_pdflush, &bdi->state);
 }
 
+static noinline void block_dump___mark_inode_dirty(struct inode *inode)
+{
+	if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
+		struct dentry *dentry;
+		const char *name = "?";
+
+		dentry = d_find_alias(inode);
+		if (dentry) {
+			spin_lock(&dentry->d_lock);
+			name = (const char *) dentry->d_name.name;
+		}
+		printk(KERN_DEBUG
+		       "%s(%d): dirtied inode %lu (%s) on %s\n",
+		       current->comm, task_pid_nr(current), inode->i_ino,
+		       name, inode->i_sb->s_id);
+		if (dentry) {
+			spin_unlock(&dentry->d_lock);
+			dput(dentry);
+		}
+	}
+}
+
 /**
  *	__mark_inode_dirty -	internal function
  *	@inode: inode to mark
@@ -114,23 +136,8 @@ void __mark_inode_dirty(struct inode *inode, int flags)
 	if ((inode->i_state & flags) == flags)
 		return;
 
-	if (unlikely(block_dump)) {
-		struct dentry *dentry = NULL;
-		const char *name = "?";
-
-		if (!list_empty(&inode->i_dentry)) {
-			dentry = list_entry(inode->i_dentry.next,
-					    struct dentry, d_alias);
-			if (dentry && dentry->d_name.name)
-				name = (const char *) dentry->d_name.name;
-		}
-
-		if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev"))
-			printk(KERN_DEBUG
-			       "%s(%d): dirtied inode %lu (%s) on %s\n",
-			       current->comm, task_pid_nr(current), inode->i_ino,
-			       name, inode->i_sb->s_id);
-	}
+	if (unlikely(block_dump))
+		block_dump___mark_inode_dirty(inode);
 
 	spin_lock(&inode_lock);
 	if ((inode->i_state & flags) != flags) {
@@ -289,7 +296,6 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 	int ret;
 
 	BUG_ON(inode->i_state & I_SYNC);
-	WARN_ON(inode->i_state & I_NEW);
 
 	/* Set I_SYNC, reset I_DIRTY */
 	dirty = inode->i_state & I_DIRTY;
@@ -314,7 +320,6 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 	}
 
 	spin_lock(&inode_lock);
-	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state &= ~I_SYNC;
 	if (!(inode->i_state & I_FREEING)) {
 		if (!(inode->i_state & I_DIRTY) &&
@@ -679,55 +684,6 @@ void sync_inodes_sb(struct super_block *sb, int wait)
 }
 
 /**
- * sync_inodes - writes all inodes to disk
- * @wait: wait for completion
- *
- * sync_inodes() goes through each super block's dirty inode list, writes the
- * inodes out, waits on the writeout and puts the inodes back on the normal
- * list.
- *
- * This is for sys_sync().  fsync_dev() uses the same algorithm.  The subtle
- * part of the sync functions is that the blockdev "superblock" is processed
- * last.  This is because the write_inode() function of a typical fs will
- * perform no I/O, but will mark buffers in the blockdev mapping as dirty.
- * What we want to do is to perform all that dirtying first, and then write
- * back all those inode blocks via the blockdev mapping in one sweep.  So the
- * additional (somewhat redundant) sync_blockdev() calls here are to make
- * sure that really happens.  Because if we call sync_inodes_sb(wait=1) with
- * outstanding dirty inodes, the writeback goes block-at-a-time within the
- * filesystem's write_inode().  This is extremely slow.
- */
-static void __sync_inodes(int wait)
-{
-	struct super_block *sb;
-
-	spin_lock(&sb_lock);
-restart:
-	list_for_each_entry(sb, &super_blocks, s_list) {
-		sb->s_count++;
-		spin_unlock(&sb_lock);
-		down_read(&sb->s_umount);
-		if (sb->s_root) {
-			sync_inodes_sb(sb, wait);
-			sync_blockdev(sb->s_bdev);
-		}
-		up_read(&sb->s_umount);
-		spin_lock(&sb_lock);
-		if (__put_super_and_need_restart(sb))
-			goto restart;
-	}
-	spin_unlock(&sb_lock);
-}
-
-void sync_inodes(int wait)
-{
-	__sync_inodes(0);
-
-	if (wait)
-		__sync_inodes(1);
-}
-
-/**
  * write_inode_now	-	write an inode to disk
  * @inode: inode to write to disk
  * @sync: whether the write should be synchronous or not
diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h
index e0cbd16f6dc..1c341304621 100644
--- a/fs/fscache/internal.h
+++ b/fs/fscache/internal.h
@@ -28,7 +28,7 @@
 #define FSCACHE_MAX_THREADS	32
 
 /*
- * fsc-cache.c
+ * cache.c
  */
 extern struct list_head fscache_cache_list;
 extern struct rw_semaphore fscache_addremove_sem;
@@ -37,7 +37,7 @@ extern struct fscache_cache *fscache_select_cache_for_object(
 	struct fscache_cookie *);
 
 /*
- * fsc-cookie.c
+ * cookie.c
  */
 extern struct kmem_cache *fscache_cookie_jar;
 
@@ -45,13 +45,13 @@ extern void fscache_cookie_init_once(void *);
 extern void __fscache_cookie_put(struct fscache_cookie *);
 
 /*
- * fsc-fsdef.c
+ * fsdef.c
  */
 extern struct fscache_cookie fscache_fsdef_index;
 extern struct fscache_cookie_def fscache_fsdef_netfs_def;
 
 /*
- * fsc-histogram.c
+ * histogram.c
  */
 #ifdef CONFIG_FSCACHE_HISTOGRAM
 extern atomic_t fscache_obj_instantiate_histogram[HZ];
@@ -75,7 +75,7 @@ extern const struct file_operations fscache_histogram_fops;
 #endif
 
 /*
- * fsc-main.c
+ * main.c
  */
 extern unsigned fscache_defer_lookup;
 extern unsigned fscache_defer_create;
@@ -86,14 +86,14 @@ extern int fscache_wait_bit(void *);
 extern int fscache_wait_bit_interruptible(void *);
 
 /*
- * fsc-object.c
+ * object.c
  */
 extern void fscache_withdrawing_object(struct fscache_cache *,
 				       struct fscache_object *);
 extern void fscache_enqueue_object(struct fscache_object *);
 
 /*
- * fsc-operation.c
+ * operation.c
  */
 extern int fscache_submit_exclusive_op(struct fscache_object *,
 				       struct fscache_operation *);
@@ -104,7 +104,7 @@ extern void fscache_start_operations(struct fscache_object *);
 extern void fscache_operation_gc(struct work_struct *);
 
 /*
- * fsc-proc.c
+ * proc.c
  */
 #ifdef CONFIG_PROC_FS
 extern int __init fscache_proc_init(void);
@@ -115,7 +115,7 @@ extern void fscache_proc_cleanup(void);
 #endif
 
 /*
- * fsc-stats.c
+ * stats.c
  */
 #ifdef CONFIG_FSCACHE_STATS
 extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS];
diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
index 72437065f6a..e95eeb445e5 100644
--- a/fs/fuse/Makefile
+++ b/fs/fuse/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_FUSE_FS) += fuse.o
+obj-$(CONFIG_CUSE) += cuse.o
 
 fuse-objs := dev.o dir.o file.o inode.o control.o
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
new file mode 100644
index 00000000000..de792dcf327
--- /dev/null
+++ b/fs/fuse/cuse.c
@@ -0,0 +1,610 @@
+/*
+ * CUSE: Character device in Userspace
+ *
+ * Copyright (C) 2008-2009  SUSE Linux Products GmbH
+ * Copyright (C) 2008-2009  Tejun Heo <tj@kernel.org>
+ *
+ * This file is released under the GPLv2.
+ *
+ * CUSE enables character devices to be implemented from userland much
+ * like FUSE allows filesystems.  On initialization /dev/cuse is
+ * created.  By opening the file and replying to the CUSE_INIT request
+ * userland CUSE server can create a character device.  After that the
+ * operation is very similar to FUSE.
+ *
+ * A CUSE instance involves the following objects.
+ *
+ * cuse_conn	: contains fuse_conn and serves as bonding structure
+ * channel	: file handle connected to the userland CUSE server
+ * cdev		: the implemented character device
+ * dev		: generic device for cdev
+ *
+ * Note that 'channel' is what 'dev' is in FUSE.  As CUSE deals with
+ * devices, it's called 'channel' to reduce confusion.
+ *
+ * channel determines when the character device dies.  When channel is
+ * closed, everything begins to destruct.  The cuse_conn is taken off
+ * the lookup table preventing further access from cdev, cdev and
+ * generic device are removed and the base reference of cuse_conn is
+ * put.
+ *
+ * On each open, the matching cuse_conn is looked up and if found an
+ * additional reference is taken which is released when the file is
+ * closed.
+ */
+
+#include <linux/fuse.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kdev_t.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/magic.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+
+#include "fuse_i.h"
+
+#define CUSE_CONNTBL_LEN	64
+
+struct cuse_conn {
+	struct list_head	list;	/* linked on cuse_conntbl */
+	struct fuse_conn	fc;	/* fuse connection */
+	struct cdev		*cdev;	/* associated character device */
+	struct device		*dev;	/* device representing @cdev */
+
+	/* init parameters, set once during initialization */
+	bool			unrestricted_ioctl;
+};
+
+static DEFINE_SPINLOCK(cuse_lock);		/* protects cuse_conntbl */
+static struct list_head cuse_conntbl[CUSE_CONNTBL_LEN];
+static struct class *cuse_class;
+
+static struct cuse_conn *fc_to_cc(struct fuse_conn *fc)
+{
+	return container_of(fc, struct cuse_conn, fc);
+}
+
+static struct list_head *cuse_conntbl_head(dev_t devt)
+{
+	return &cuse_conntbl[(MAJOR(devt) + MINOR(devt)) % CUSE_CONNTBL_LEN];
+}
+
+
+/**************************************************************************
+ * CUSE frontend operations
+ *
+ * These are file operations for the character device.
+ *
+ * On open, CUSE opens a file from the FUSE mnt and stores it to
+ * private_data of the open file.  All other ops call FUSE ops on the
+ * FUSE file.
+ */
+
+static ssize_t cuse_read(struct file *file, char __user *buf, size_t count,
+			 loff_t *ppos)
+{
+	loff_t pos = 0;
+
+	return fuse_direct_io(file, buf, count, &pos, 0);
+}
+
+static ssize_t cuse_write(struct file *file, const char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	loff_t pos = 0;
+	/*
+	 * No locking or generic_write_checks(), the server is
+	 * responsible for locking and sanity checks.
+	 */
+	return fuse_direct_io(file, buf, count, &pos, 1);
+}
+
+static int cuse_open(struct inode *inode, struct file *file)
+{
+	dev_t devt = inode->i_cdev->dev;
+	struct cuse_conn *cc = NULL, *pos;
+	int rc;
+
+	/* look up and get the connection */
+	spin_lock(&cuse_lock);
+	list_for_each_entry(pos, cuse_conntbl_head(devt), list)
+		if (pos->dev->devt == devt) {
+			fuse_conn_get(&pos->fc);
+			cc = pos;
+			break;
+		}
+	spin_unlock(&cuse_lock);
+
+	/* dead? */
+	if (!cc)
+		return -ENODEV;
+
+	/*
+	 * Generic permission check is already done against the chrdev
+	 * file, proceed to open.
+	 */
+	rc = fuse_do_open(&cc->fc, 0, file, 0);
+	if (rc)
+		fuse_conn_put(&cc->fc);
+	return rc;
+}
+
+static int cuse_release(struct inode *inode, struct file *file)
+{
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
+
+	fuse_sync_release(ff, file->f_flags);
+	fuse_conn_put(fc);
+
+	return 0;
+}
+
+static long cuse_file_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
+{
+	struct fuse_file *ff = file->private_data;
+	struct cuse_conn *cc = fc_to_cc(ff->fc);
+	unsigned int flags = 0;
+
+	if (cc->unrestricted_ioctl)
+		flags |= FUSE_IOCTL_UNRESTRICTED;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
+
+static long cuse_file_compat_ioctl(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	struct fuse_file *ff = file->private_data;
+	struct cuse_conn *cc = fc_to_cc(ff->fc);
+	unsigned int flags = FUSE_IOCTL_COMPAT;
+
+	if (cc->unrestricted_ioctl)
+		flags |= FUSE_IOCTL_UNRESTRICTED;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
+
+static const struct file_operations cuse_frontend_fops = {
+	.owner			= THIS_MODULE,
+	.read			= cuse_read,
+	.write			= cuse_write,
+	.open			= cuse_open,
+	.release		= cuse_release,
+	.unlocked_ioctl		= cuse_file_ioctl,
+	.compat_ioctl		= cuse_file_compat_ioctl,
+	.poll			= fuse_file_poll,
+};
+
+
+/**************************************************************************
+ * CUSE channel initialization and destruction
+ */
+
+struct cuse_devinfo {
+	const char		*name;
+};
+
+/**
+ * cuse_parse_one - parse one key=value pair
+ * @pp: i/o parameter for the current position
+ * @end: points to one past the end of the packed string
+ * @keyp: out parameter for key
+ * @valp: out parameter for value
+ *
+ * *@pp points to packed strings - "key0=val0\0key1=val1\0" which ends
+ * at @end - 1.  This function parses one pair and set *@keyp to the
+ * start of the key and *@valp to the start of the value.  Note that
+ * the original string is modified such that the key string is
+ * terminated with '\0'.  *@pp is updated to point to the next string.
+ *
+ * RETURNS:
+ * 1 on successful parse, 0 on EOF, -errno on failure.
+ */
+static int cuse_parse_one(char **pp, char *end, char **keyp, char **valp)
+{
+	char *p = *pp;
+	char *key, *val;
+
+	while (p < end && *p == '\0')
+		p++;
+	if (p == end)
+		return 0;
+
+	if (end[-1] != '\0') {
+		printk(KERN_ERR "CUSE: info not properly terminated\n");
+		return -EINVAL;
+	}
+
+	key = val = p;
+	p += strlen(p);
+
+	if (valp) {
+		strsep(&val, "=");
+		if (!val)
+			val = key + strlen(key);
+		key = strstrip(key);
+		val = strstrip(val);
+	} else
+		key = strstrip(key);
+
+	if (!strlen(key)) {
+		printk(KERN_ERR "CUSE: zero length info key specified\n");
+		return -EINVAL;
+	}
+
+	*pp = p;
+	*keyp = key;
+	if (valp)
+		*valp = val;
+
+	return 1;
+}
+
+/**
+ * cuse_parse_dev_info - parse device info
+ * @p: device info string
+ * @len: length of device info string
+ * @devinfo: out parameter for parsed device info
+ *
+ * Parse @p to extract device info and store it into @devinfo.  String
+ * pointed to by @p is modified by parsing and @devinfo points into
+ * them, so @p shouldn't be freed while @devinfo is in use.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_parse_devinfo(char *p, size_t len, struct cuse_devinfo *devinfo)
+{
+	char *end = p + len;
+	char *key, *val;
+	int rc;
+
+	while (true) {
+		rc = cuse_parse_one(&p, end, &key, &val);
+		if (rc < 0)
+			return rc;
+		if (!rc)
+			break;
+		if (strcmp(key, "DEVNAME") == 0)
+			devinfo->name = val;
+		else
+			printk(KERN_WARNING "CUSE: unknown device info \"%s\"\n",
+			       key);
+	}
+
+	if (!devinfo->name || !strlen(devinfo->name)) {
+		printk(KERN_ERR "CUSE: DEVNAME unspecified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void cuse_gendev_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+/**
+ * cuse_process_init_reply - finish initializing CUSE channel
+ *
+ * This function creates the character device and sets up all the
+ * required data structures for it.  Please read the comment at the
+ * top of this file for high level overview.
+ */
+static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
+{
+	struct cuse_conn *cc = fc_to_cc(fc);
+	struct cuse_init_out *arg = &req->misc.cuse_init_out;
+	struct page *page = req->pages[0];
+	struct cuse_devinfo devinfo = { };
+	struct device *dev;
+	struct cdev *cdev;
+	dev_t devt;
+	int rc;
+
+	if (req->out.h.error ||
+	    arg->major != FUSE_KERNEL_VERSION || arg->minor < 11) {
+		goto err;
+	}
+
+	fc->minor = arg->minor;
+	fc->max_read = max_t(unsigned, arg->max_read, 4096);
+	fc->max_write = max_t(unsigned, arg->max_write, 4096);
+
+	/* parse init reply */
+	cc->unrestricted_ioctl = arg->flags & CUSE_UNRESTRICTED_IOCTL;
+
+	rc = cuse_parse_devinfo(page_address(page), req->out.args[1].size,
+				&devinfo);
+	if (rc)
+		goto err;
+
+	/* determine and reserve devt */
+	devt = MKDEV(arg->dev_major, arg->dev_minor);
+	if (!MAJOR(devt))
+		rc = alloc_chrdev_region(&devt, MINOR(devt), 1, devinfo.name);
+	else
+		rc = register_chrdev_region(devt, 1, devinfo.name);
+	if (rc) {
+		printk(KERN_ERR "CUSE: failed to register chrdev region\n");
+		goto err;
+	}
+
+	/* devt determined, create device */
+	rc = -ENOMEM;
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto err_region;
+
+	device_initialize(dev);
+	dev_set_uevent_suppress(dev, 1);
+	dev->class = cuse_class;
+	dev->devt = devt;
+	dev->release = cuse_gendev_release;
+	dev_set_drvdata(dev, cc);
+	dev_set_name(dev, "%s", devinfo.name);
+
+	rc = device_add(dev);
+	if (rc)
+		goto err_device;
+
+	/* register cdev */
+	rc = -ENOMEM;
+	cdev = cdev_alloc();
+	if (!cdev)
+		goto err_device;
+
+	cdev->owner = THIS_MODULE;
+	cdev->ops = &cuse_frontend_fops;
+
+	rc = cdev_add(cdev, devt, 1);
+	if (rc)
+		goto err_cdev;
+
+	cc->dev = dev;
+	cc->cdev = cdev;
+
+	/* make the device available */
+	spin_lock(&cuse_lock);
+	list_add(&cc->list, cuse_conntbl_head(devt));
+	spin_unlock(&cuse_lock);
+
+	/* announce device availability */
+	dev_set_uevent_suppress(dev, 0);
+	kobject_uevent(&dev->kobj, KOBJ_ADD);
+out:
+	__free_page(page);
+	return;
+
+err_cdev:
+	cdev_del(cdev);
+err_device:
+	put_device(dev);
+err_region:
+	unregister_chrdev_region(devt, 1);
+err:
+	fc->conn_error = 1;
+	goto out;
+}
+
+static int cuse_send_init(struct cuse_conn *cc)
+{
+	int rc;
+	struct fuse_req *req;
+	struct page *page;
+	struct fuse_conn *fc = &cc->fc;
+	struct cuse_init_in *arg;
+
+	BUILD_BUG_ON(CUSE_INIT_INFO_MAX > PAGE_SIZE);
+
+	req = fuse_get_req(fc);
+	if (IS_ERR(req)) {
+		rc = PTR_ERR(req);
+		goto err;
+	}
+
+	rc = -ENOMEM;
+	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+	if (!page)
+		goto err_put_req;
+
+	arg = &req->misc.cuse_init_in;
+	arg->major = FUSE_KERNEL_VERSION;
+	arg->minor = FUSE_KERNEL_MINOR_VERSION;
+	arg->flags |= CUSE_UNRESTRICTED_IOCTL;
+	req->in.h.opcode = CUSE_INIT;
+	req->in.numargs = 1;
+	req->in.args[0].size = sizeof(struct cuse_init_in);
+	req->in.args[0].value = arg;
+	req->out.numargs = 2;
+	req->out.args[0].size = sizeof(struct cuse_init_out);
+	req->out.args[0].value = &req->misc.cuse_init_out;
+	req->out.args[1].size = CUSE_INIT_INFO_MAX;
+	req->out.argvar = 1;
+	req->out.argpages = 1;
+	req->pages[0] = page;
+	req->num_pages = 1;
+	req->end = cuse_process_init_reply;
+	fuse_request_send_background(fc, req);
+
+	return 0;
+
+err_put_req:
+	fuse_put_request(fc, req);
+err:
+	return rc;
+}
+
+static void cuse_fc_release(struct fuse_conn *fc)
+{
+	struct cuse_conn *cc = fc_to_cc(fc);
+	kfree(cc);
+}
+
+/**
+ * cuse_channel_open - open method for /dev/cuse
+ * @inode: inode for /dev/cuse
+ * @file: file struct being opened
+ *
+ * Userland CUSE server can create a CUSE device by opening /dev/cuse
+ * and replying to the initilaization request kernel sends.  This
+ * function is responsible for handling CUSE device initialization.
+ * Because the fd opened by this function is used during
+ * initialization, this function only creates cuse_conn and sends
+ * init.  The rest is delegated to a kthread.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_channel_open(struct inode *inode, struct file *file)
+{
+	struct cuse_conn *cc;
+	int rc;
+
+	/* set up cuse_conn */
+	cc = kzalloc(sizeof(*cc), GFP_KERNEL);
+	if (!cc)
+		return -ENOMEM;
+
+	fuse_conn_init(&cc->fc);
+
+	INIT_LIST_HEAD(&cc->list);
+	cc->fc.release = cuse_fc_release;
+
+	cc->fc.connected = 1;
+	cc->fc.blocked = 0;
+	rc = cuse_send_init(cc);
+	if (rc) {
+		fuse_conn_put(&cc->fc);
+		return rc;
+	}
+	file->private_data = &cc->fc;	/* channel owns base reference to cc */
+
+	return 0;
+}
+
+/**
+ * cuse_channel_release - release method for /dev/cuse
+ * @inode: inode for /dev/cuse
+ * @file: file struct being closed
+ *
+ * Disconnect the channel, deregister CUSE device and initiate
+ * destruction by putting the default reference.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int cuse_channel_release(struct inode *inode, struct file *file)
+{
+	struct cuse_conn *cc = fc_to_cc(file->private_data);
+	int rc;
+
+	/* remove from the conntbl, no more access from this point on */
+	spin_lock(&cuse_lock);
+	list_del_init(&cc->list);
+	spin_unlock(&cuse_lock);
+
+	/* remove device */
+	if (cc->dev)
+		device_unregister(cc->dev);
+	if (cc->cdev) {
+		unregister_chrdev_region(cc->cdev->dev, 1);
+		cdev_del(cc->cdev);
+	}
+
+	/* kill connection and shutdown channel */
+	fuse_conn_kill(&cc->fc);
+	rc = fuse_dev_release(inode, file);	/* puts the base reference */
+
+	return rc;
+}
+
+static struct file_operations cuse_channel_fops; /* initialized during init */
+
+
+/**************************************************************************
+ * Misc stuff and module initializatiion
+ *
+ * CUSE exports the same set of attributes to sysfs as fusectl.
+ */
+
+static ssize_t cuse_class_waiting_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct cuse_conn *cc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", atomic_read(&cc->fc.num_waiting));
+}
+
+static ssize_t cuse_class_abort_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct cuse_conn *cc = dev_get_drvdata(dev);
+
+	fuse_abort_conn(&cc->fc);
+	return count;
+}
+
+static struct device_attribute cuse_class_dev_attrs[] = {
+	__ATTR(waiting, S_IFREG | 0400, cuse_class_waiting_show, NULL),
+	__ATTR(abort, S_IFREG | 0200, NULL, cuse_class_abort_store),
+	{ }
+};
+
+static struct miscdevice cuse_miscdev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "cuse",
+	.fops		= &cuse_channel_fops,
+};
+
+static int __init cuse_init(void)
+{
+	int i, rc;
+
+	/* init conntbl */
+	for (i = 0; i < CUSE_CONNTBL_LEN; i++)
+		INIT_LIST_HEAD(&cuse_conntbl[i]);
+
+	/* inherit and extend fuse_dev_operations */
+	cuse_channel_fops		= fuse_dev_operations;
+	cuse_channel_fops.owner		= THIS_MODULE;
+	cuse_channel_fops.open		= cuse_channel_open;
+	cuse_channel_fops.release	= cuse_channel_release;
+
+	cuse_class = class_create(THIS_MODULE, "cuse");
+	if (IS_ERR(cuse_class))
+		return PTR_ERR(cuse_class);
+
+	cuse_class->dev_attrs = cuse_class_dev_attrs;
+
+	rc = misc_register(&cuse_miscdev);
+	if (rc) {
+		class_destroy(cuse_class);
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit cuse_exit(void)
+{
+	misc_deregister(&cuse_miscdev);
+	class_destroy(cuse_class);
+}
+
+module_init(cuse_init);
+module_exit(cuse_exit);
+
+MODULE_AUTHOR("Tejun Heo <tj@kernel.org>");
+MODULE_DESCRIPTION("Character device in Userspace");
+MODULE_LICENSE("GPL");
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index ba76b68c52f..8fed2ed12f3 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -46,6 +46,7 @@ struct fuse_req *fuse_request_alloc(void)
 		fuse_request_init(req);
 	return req;
 }
+EXPORT_SYMBOL_GPL(fuse_request_alloc);
 
 struct fuse_req *fuse_request_alloc_nofs(void)
 {
@@ -124,6 +125,7 @@ struct fuse_req *fuse_get_req(struct fuse_conn *fc)
 	atomic_dec(&fc->num_waiting);
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL_GPL(fuse_get_req);
 
 /*
  * Return request in fuse_file->reserved_req.  However that may
@@ -208,6 +210,7 @@ void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req)
 			fuse_request_free(req);
 	}
 }
+EXPORT_SYMBOL_GPL(fuse_put_request);
 
 static unsigned len_args(unsigned numargs, struct fuse_arg *args)
 {
@@ -282,7 +285,7 @@ __releases(&fc->lock)
 			wake_up_all(&fc->blocked_waitq);
 		}
 		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
-		    fc->connected) {
+		    fc->connected && fc->bdi_initialized) {
 			clear_bdi_congested(&fc->bdi, READ);
 			clear_bdi_congested(&fc->bdi, WRITE);
 		}
@@ -400,6 +403,7 @@ void fuse_request_send(struct fuse_conn *fc, struct fuse_req *req)
 	}
 	spin_unlock(&fc->lock);
 }
+EXPORT_SYMBOL_GPL(fuse_request_send);
 
 static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 					    struct fuse_req *req)
@@ -408,7 +412,8 @@ static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 	fc->num_background++;
 	if (fc->num_background == FUSE_MAX_BACKGROUND)
 		fc->blocked = 1;
-	if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+	if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+	    fc->bdi_initialized) {
 		set_bdi_congested(&fc->bdi, READ);
 		set_bdi_congested(&fc->bdi, WRITE);
 	}
@@ -439,6 +444,7 @@ void fuse_request_send_background(struct fuse_conn *fc, struct fuse_req *req)
 	req->isreply = 1;
 	fuse_request_send_nowait(fc, req);
 }
+EXPORT_SYMBOL_GPL(fuse_request_send_background);
 
 /*
  * Called under fc->lock
@@ -1105,8 +1111,9 @@ void fuse_abort_conn(struct fuse_conn *fc)
 	}
 	spin_unlock(&fc->lock);
 }
+EXPORT_SYMBOL_GPL(fuse_abort_conn);
 
-static int fuse_dev_release(struct inode *inode, struct file *file)
+int fuse_dev_release(struct inode *inode, struct file *file)
 {
 	struct fuse_conn *fc = fuse_get_conn(file);
 	if (fc) {
@@ -1120,6 +1127,7 @@ static int fuse_dev_release(struct inode *inode, struct file *file)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(fuse_dev_release);
 
 static int fuse_dev_fasync(int fd, struct file *file, int on)
 {
@@ -1142,6 +1150,7 @@ const struct file_operations fuse_dev_operations = {
 	.release	= fuse_dev_release,
 	.fasync		= fuse_dev_fasync,
 };
+EXPORT_SYMBOL_GPL(fuse_dev_operations);
 
 static struct miscdevice fuse_miscdevice = {
 	.minor = FUSE_MINOR,
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 8b8eebc5614..b3089a083d3 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -362,19 +362,6 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 }
 
 /*
- * Synchronous release for the case when something goes wrong in CREATE_OPEN
- */
-static void fuse_sync_release(struct fuse_conn *fc, struct fuse_file *ff,
-			      u64 nodeid, int flags)
-{
-	fuse_release_fill(ff, nodeid, flags, FUSE_RELEASE);
-	ff->reserved_req->force = 1;
-	fuse_request_send(fc, ff->reserved_req);
-	fuse_put_request(fc, ff->reserved_req);
-	kfree(ff);
-}
-
-/*
  * Atomic create+open operation
  *
  * If the filesystem doesn't support this, then fall back to separate
@@ -445,12 +432,14 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 		goto out_free_ff;
 
 	fuse_put_request(fc, req);
+	ff->fh = outopen.fh;
+	ff->nodeid = outentry.nodeid;
+	ff->open_flags = outopen.open_flags;
 	inode = fuse_iget(dir->i_sb, outentry.nodeid, outentry.generation,
 			  &outentry.attr, entry_attr_timeout(&outentry), 0);
 	if (!inode) {
 		flags &= ~(O_CREAT | O_EXCL | O_TRUNC);
-		ff->fh = outopen.fh;
-		fuse_sync_release(fc, ff, outentry.nodeid, flags);
+		fuse_sync_release(ff, flags);
 		fuse_send_forget(fc, forget_req, outentry.nodeid, 1);
 		return -ENOMEM;
 	}
@@ -460,11 +449,11 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 	fuse_invalidate_attr(dir);
 	file = lookup_instantiate_filp(nd, entry, generic_file_open);
 	if (IS_ERR(file)) {
-		ff->fh = outopen.fh;
-		fuse_sync_release(fc, ff, outentry.nodeid, flags);
+		fuse_sync_release(ff, flags);
 		return PTR_ERR(file);
 	}
-	fuse_finish_open(inode, file, ff, &outopen);
+	file->private_data = fuse_file_get(ff);
+	fuse_finish_open(inode, file);
 	return 0;
 
  out_free_ff:
@@ -1035,7 +1024,7 @@ static int fuse_readdir(struct file *file, void *dstbuf, filldir_t filldir)
 	req->out.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = page;
-	fuse_read_fill(req, file, inode, file->f_pos, PAGE_SIZE, FUSE_READDIR);
+	fuse_read_fill(req, file, file->f_pos, PAGE_SIZE, FUSE_READDIR);
 	fuse_request_send(fc, req);
 	nbytes = req->out.args[0].size;
 	err = req->out.h.error;
@@ -1101,12 +1090,14 @@ static void fuse_put_link(struct dentry *dentry, struct nameidata *nd, void *c)
 
 static int fuse_dir_open(struct inode *inode, struct file *file)
 {
-	return fuse_open_common(inode, file, 1);
+	return fuse_open_common(inode, file, true);
 }
 
 static int fuse_dir_release(struct inode *inode, struct file *file)
 {
-	return fuse_release_common(inode, file, 1);
+	fuse_release_common(file, FUSE_RELEASEDIR);
+
+	return 0;
 }
 
 static int fuse_dir_fsync(struct file *file, struct dentry *de, int datasync)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 06f30e96567..fce6ce694fd 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -12,13 +12,13 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 static const struct file_operations fuse_direct_io_file_operations;
 
-static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
-			  struct fuse_open_out *outargp)
+static int fuse_send_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+			  int opcode, struct fuse_open_out *outargp)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_open_in inarg;
 	struct fuse_req *req;
 	int err;
@@ -31,8 +31,8 @@ static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
 	inarg.flags = file->f_flags & ~(O_CREAT | O_EXCL | O_NOCTTY);
 	if (!fc->atomic_o_trunc)
 		inarg.flags &= ~O_TRUNC;
-	req->in.h.opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.opcode = opcode;
+	req->in.h.nodeid = nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -49,22 +49,27 @@ static int fuse_send_open(struct inode *inode, struct file *file, int isdir,
 struct fuse_file *fuse_file_alloc(struct fuse_conn *fc)
 {
 	struct fuse_file *ff;
+
 	ff = kmalloc(sizeof(struct fuse_file), GFP_KERNEL);
-	if (ff) {
-		ff->reserved_req = fuse_request_alloc();
-		if (!ff->reserved_req) {
-			kfree(ff);
-			return NULL;
-		} else {
-			INIT_LIST_HEAD(&ff->write_entry);
-			atomic_set(&ff->count, 0);
-			spin_lock(&fc->lock);
-			ff->kh = ++fc->khctr;
-			spin_unlock(&fc->lock);
-		}
-		RB_CLEAR_NODE(&ff->polled_node);
-		init_waitqueue_head(&ff->poll_wait);
+	if (unlikely(!ff))
+		return NULL;
+
+	ff->fc = fc;
+	ff->reserved_req = fuse_request_alloc();
+	if (unlikely(!ff->reserved_req)) {
+		kfree(ff);
+		return NULL;
 	}
+
+	INIT_LIST_HEAD(&ff->write_entry);
+	atomic_set(&ff->count, 0);
+	RB_CLEAR_NODE(&ff->polled_node);
+	init_waitqueue_head(&ff->poll_wait);
+
+	spin_lock(&fc->lock);
+	ff->kh = ++fc->khctr;
+	spin_unlock(&fc->lock);
+
 	return ff;
 }
 
@@ -74,7 +79,7 @@ void fuse_file_free(struct fuse_file *ff)
 	kfree(ff);
 }
 
-static struct fuse_file *fuse_file_get(struct fuse_file *ff)
+struct fuse_file *fuse_file_get(struct fuse_file *ff)
 {
 	atomic_inc(&ff->count);
 	return ff;
@@ -82,40 +87,65 @@ static struct fuse_file *fuse_file_get(struct fuse_file *ff)
 
 static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req)
 {
-	dput(req->misc.release.dentry);
-	mntput(req->misc.release.vfsmount);
+	path_put(&req->misc.release.path);
 }
 
 static void fuse_file_put(struct fuse_file *ff)
 {
 	if (atomic_dec_and_test(&ff->count)) {
 		struct fuse_req *req = ff->reserved_req;
-		struct inode *inode = req->misc.release.dentry->d_inode;
-		struct fuse_conn *fc = get_fuse_conn(inode);
+
 		req->end = fuse_release_end;
-		fuse_request_send_background(fc, req);
+		fuse_request_send_background(ff->fc, req);
 		kfree(ff);
 	}
 }
 
-void fuse_finish_open(struct inode *inode, struct file *file,
-		      struct fuse_file *ff, struct fuse_open_out *outarg)
+int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+		 bool isdir)
 {
-	if (outarg->open_flags & FOPEN_DIRECT_IO)
+	struct fuse_open_out outarg;
+	struct fuse_file *ff;
+	int err;
+	int opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
+
+	ff = fuse_file_alloc(fc);
+	if (!ff)
+		return -ENOMEM;
+
+	err = fuse_send_open(fc, nodeid, file, opcode, &outarg);
+	if (err) {
+		fuse_file_free(ff);
+		return err;
+	}
+
+	if (isdir)
+		outarg.open_flags &= ~FOPEN_DIRECT_IO;
+
+	ff->fh = outarg.fh;
+	ff->nodeid = nodeid;
+	ff->open_flags = outarg.open_flags;
+	file->private_data = fuse_file_get(ff);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fuse_do_open);
+
+void fuse_finish_open(struct inode *inode, struct file *file)
+{
+	struct fuse_file *ff = file->private_data;
+
+	if (ff->open_flags & FOPEN_DIRECT_IO)
 		file->f_op = &fuse_direct_io_file_operations;
-	if (!(outarg->open_flags & FOPEN_KEEP_CACHE))
+	if (!(ff->open_flags & FOPEN_KEEP_CACHE))
 		invalidate_inode_pages2(inode->i_mapping);
-	if (outarg->open_flags & FOPEN_NONSEEKABLE)
+	if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
-	ff->fh = outarg->fh;
-	file->private_data = fuse_file_get(ff);
 }
 
-int fuse_open_common(struct inode *inode, struct file *file, int isdir)
+int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
-	struct fuse_open_out outarg;
-	struct fuse_file *ff;
 	int err;
 
 	/* VFS checks this, but only _after_ ->open() */
@@ -126,78 +156,85 @@ int fuse_open_common(struct inode *inode, struct file *file, int isdir)
 	if (err)
 		return err;
 
-	ff = fuse_file_alloc(fc);
-	if (!ff)
-		return -ENOMEM;
-
-	err = fuse_send_open(inode, file, isdir, &outarg);
+	err = fuse_do_open(fc, get_node_id(inode), file, isdir);
 	if (err)
-		fuse_file_free(ff);
-	else {
-		if (isdir)
-			outarg.open_flags &= ~FOPEN_DIRECT_IO;
-		fuse_finish_open(inode, file, ff, &outarg);
-	}
+		return err;
 
-	return err;
+	fuse_finish_open(inode, file);
+
+	return 0;
 }
 
-void fuse_release_fill(struct fuse_file *ff, u64 nodeid, int flags, int opcode)
+static void fuse_prepare_release(struct fuse_file *ff, int flags, int opcode)
 {
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_req *req = ff->reserved_req;
 	struct fuse_release_in *inarg = &req->misc.release.in;
 
+	spin_lock(&fc->lock);
+	list_del(&ff->write_entry);
+	if (!RB_EMPTY_NODE(&ff->polled_node))
+		rb_erase(&ff->polled_node, &fc->polled_files);
+	spin_unlock(&fc->lock);
+
+	wake_up_interruptible_sync(&ff->poll_wait);
+
 	inarg->fh = ff->fh;
 	inarg->flags = flags;
 	req->in.h.opcode = opcode;
-	req->in.h.nodeid = nodeid;
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(struct fuse_release_in);
 	req->in.args[0].value = inarg;
 }
 
-int fuse_release_common(struct inode *inode, struct file *file, int isdir)
+void fuse_release_common(struct file *file, int opcode)
 {
-	struct fuse_file *ff = file->private_data;
-	if (ff) {
-		struct fuse_conn *fc = get_fuse_conn(inode);
-		struct fuse_req *req = ff->reserved_req;
-
-		fuse_release_fill(ff, get_node_id(inode), file->f_flags,
-				  isdir ? FUSE_RELEASEDIR : FUSE_RELEASE);
+	struct fuse_file *ff;
+	struct fuse_req *req;
 
-		/* Hold vfsmount and dentry until release is finished */
-		req->misc.release.vfsmount = mntget(file->f_path.mnt);
-		req->misc.release.dentry = dget(file->f_path.dentry);
+	ff = file->private_data;
+	if (unlikely(!ff))
+		return;
 
-		spin_lock(&fc->lock);
-		list_del(&ff->write_entry);
-		if (!RB_EMPTY_NODE(&ff->polled_node))
-			rb_erase(&ff->polled_node, &fc->polled_files);
-		spin_unlock(&fc->lock);
+	req = ff->reserved_req;
+	fuse_prepare_release(ff, file->f_flags, opcode);
 
-		wake_up_interruptible_sync(&ff->poll_wait);
-		/*
-		 * Normally this will send the RELEASE request,
-		 * however if some asynchronous READ or WRITE requests
-		 * are outstanding, the sending will be delayed
-		 */
-		fuse_file_put(ff);
-	}
+	/* Hold vfsmount and dentry until release is finished */
+	path_get(&file->f_path);
+	req->misc.release.path = file->f_path;
 
-	/* Return value is ignored by VFS */
-	return 0;
+	/*
+	 * Normally this will send the RELEASE request, however if
+	 * some asynchronous READ or WRITE requests are outstanding,
+	 * the sending will be delayed.
+	 */
+	fuse_file_put(ff);
 }
 
 static int fuse_open(struct inode *inode, struct file *file)
 {
-	return fuse_open_common(inode, file, 0);
+	return fuse_open_common(inode, file, false);
 }
 
 static int fuse_release(struct inode *inode, struct file *file)
 {
-	return fuse_release_common(inode, file, 0);
+	fuse_release_common(file, FUSE_RELEASE);
+
+	/* return value is ignored by VFS */
+	return 0;
+}
+
+void fuse_sync_release(struct fuse_file *ff, int flags)
+{
+	WARN_ON(atomic_read(&ff->count) > 1);
+	fuse_prepare_release(ff, flags, FUSE_RELEASE);
+	ff->reserved_req->force = 1;
+	fuse_request_send(ff->fc, ff->reserved_req);
+	fuse_put_request(ff->fc, ff->reserved_req);
+	kfree(ff);
 }
+EXPORT_SYMBOL_GPL(fuse_sync_release);
 
 /*
  * Scramble the ID space with XTEA, so that the value of the files_struct
@@ -371,8 +408,8 @@ static int fuse_fsync(struct file *file, struct dentry *de, int datasync)
 	return fuse_fsync_common(file, de, datasync, 0);
 }
 
-void fuse_read_fill(struct fuse_req *req, struct file *file,
-		    struct inode *inode, loff_t pos, size_t count, int opcode)
+void fuse_read_fill(struct fuse_req *req, struct file *file, loff_t pos,
+		    size_t count, int opcode)
 {
 	struct fuse_read_in *inarg = &req->misc.read.in;
 	struct fuse_file *ff = file->private_data;
@@ -382,7 +419,7 @@ void fuse_read_fill(struct fuse_req *req, struct file *file,
 	inarg->size = count;
 	inarg->flags = file->f_flags;
 	req->in.h.opcode = opcode;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(struct fuse_read_in);
 	req->in.args[0].value = inarg;
@@ -392,12 +429,12 @@ void fuse_read_fill(struct fuse_req *req, struct file *file,
 }
 
 static size_t fuse_send_read(struct fuse_req *req, struct file *file,
-			     struct inode *inode, loff_t pos, size_t count,
-			     fl_owner_t owner)
+			     loff_t pos, size_t count, fl_owner_t owner)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 
-	fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+	fuse_read_fill(req, file, pos, count, FUSE_READ);
 	if (owner != NULL) {
 		struct fuse_read_in *inarg = &req->misc.read.in;
 
@@ -455,7 +492,7 @@ static int fuse_readpage(struct file *file, struct page *page)
 	req->out.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = page;
-	num_read = fuse_send_read(req, file, inode, pos, count, NULL);
+	num_read = fuse_send_read(req, file, pos, count, NULL);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 
@@ -504,19 +541,18 @@ static void fuse_readpages_end(struct fuse_conn *fc, struct fuse_req *req)
 		fuse_file_put(req->ff);
 }
 
-static void fuse_send_readpages(struct fuse_req *req, struct file *file,
-				struct inode *inode)
+static void fuse_send_readpages(struct fuse_req *req, struct file *file)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 	loff_t pos = page_offset(req->pages[0]);
 	size_t count = req->num_pages << PAGE_CACHE_SHIFT;
 
 	req->out.argpages = 1;
 	req->out.page_zeroing = 1;
-	fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+	fuse_read_fill(req, file, pos, count, FUSE_READ);
 	req->misc.read.attr_ver = fuse_get_attr_version(fc);
 	if (fc->async_read) {
-		struct fuse_file *ff = file->private_data;
 		req->ff = fuse_file_get(ff);
 		req->end = fuse_readpages_end;
 		fuse_request_send_background(fc, req);
@@ -546,7 +582,7 @@ static int fuse_readpages_fill(void *_data, struct page *page)
 	    (req->num_pages == FUSE_MAX_PAGES_PER_REQ ||
 	     (req->num_pages + 1) * PAGE_CACHE_SIZE > fc->max_read ||
 	     req->pages[req->num_pages - 1]->index + 1 != page->index)) {
-		fuse_send_readpages(req, data->file, inode);
+		fuse_send_readpages(req, data->file);
 		data->req = req = fuse_get_req(fc);
 		if (IS_ERR(req)) {
 			unlock_page(page);
@@ -580,7 +616,7 @@ static int fuse_readpages(struct file *file, struct address_space *mapping,
 	err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
 	if (!err) {
 		if (data.req->num_pages)
-			fuse_send_readpages(data.req, file, inode);
+			fuse_send_readpages(data.req, file);
 		else
 			fuse_put_request(fc, data.req);
 	}
@@ -607,24 +643,19 @@ static ssize_t fuse_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
 	return generic_file_aio_read(iocb, iov, nr_segs, pos);
 }
 
-static void fuse_write_fill(struct fuse_req *req, struct file *file,
-			    struct fuse_file *ff, struct inode *inode,
-			    loff_t pos, size_t count, int writepage)
+static void fuse_write_fill(struct fuse_req *req, struct fuse_file *ff,
+			    loff_t pos, size_t count)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_write_in *inarg = &req->misc.write.in;
 	struct fuse_write_out *outarg = &req->misc.write.out;
 
-	memset(inarg, 0, sizeof(struct fuse_write_in));
 	inarg->fh = ff->fh;
 	inarg->offset = pos;
 	inarg->size = count;
-	inarg->write_flags = writepage ? FUSE_WRITE_CACHE : 0;
-	inarg->flags = file ? file->f_flags : 0;
 	req->in.h.opcode = FUSE_WRITE;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 2;
-	if (fc->minor < 9)
+	if (ff->fc->minor < 9)
 		req->in.args[0].size = FUSE_COMPAT_WRITE_IN_SIZE;
 	else
 		req->in.args[0].size = sizeof(struct fuse_write_in);
@@ -636,13 +667,15 @@ static void fuse_write_fill(struct fuse_req *req, struct file *file,
 }
 
 static size_t fuse_send_write(struct fuse_req *req, struct file *file,
-			      struct inode *inode, loff_t pos, size_t count,
-			      fl_owner_t owner)
+			      loff_t pos, size_t count, fl_owner_t owner)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
-	fuse_write_fill(req, file, file->private_data, inode, pos, count, 0);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
+	struct fuse_write_in *inarg = &req->misc.write.in;
+
+	fuse_write_fill(req, ff, pos, count);
+	inarg->flags = file->f_flags;
 	if (owner != NULL) {
-		struct fuse_write_in *inarg = &req->misc.write.in;
 		inarg->write_flags |= FUSE_WRITE_LOCKOWNER;
 		inarg->lock_owner = fuse_lock_owner_id(fc, owner);
 	}
@@ -700,7 +733,7 @@ static int fuse_buffered_write(struct file *file, struct inode *inode,
 	req->num_pages = 1;
 	req->pages[0] = page;
 	req->page_offset = offset;
-	nres = fuse_send_write(req, file, inode, pos, count, NULL);
+	nres = fuse_send_write(req, file, pos, count, NULL);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 	if (!err && !nres)
@@ -741,7 +774,7 @@ static size_t fuse_send_write_pages(struct fuse_req *req, struct file *file,
 	for (i = 0; i < req->num_pages; i++)
 		fuse_wait_on_page_writeback(inode, req->pages[i]->index);
 
-	res = fuse_send_write(req, file, inode, pos, count, NULL);
+	res = fuse_send_write(req, file, pos, count, NULL);
 
 	offset = req->page_offset;
 	count = res;
@@ -979,25 +1012,23 @@ static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
 	return 0;
 }
 
-static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
-			      size_t count, loff_t *ppos, int write)
+ssize_t fuse_direct_io(struct file *file, const char __user *buf,
+		       size_t count, loff_t *ppos, int write)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = ff->fc;
 	size_t nmax = write ? fc->max_write : fc->max_read;
 	loff_t pos = *ppos;
 	ssize_t res = 0;
 	struct fuse_req *req;
 
-	if (is_bad_inode(inode))
-		return -EIO;
-
 	req = fuse_get_req(fc);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
 	while (count) {
 		size_t nres;
+		fl_owner_t owner = current->files;
 		size_t nbytes = min(count, nmax);
 		int err = fuse_get_user_pages(req, buf, &nbytes, write);
 		if (err) {
@@ -1006,11 +1037,10 @@ static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
 		}
 
 		if (write)
-			nres = fuse_send_write(req, file, inode, pos, nbytes,
-					       current->files);
+			nres = fuse_send_write(req, file, pos, nbytes, owner);
 		else
-			nres = fuse_send_read(req, file, inode, pos, nbytes,
-					      current->files);
+			nres = fuse_send_read(req, file, pos, nbytes, owner);
+
 		fuse_release_user_pages(req, !write);
 		if (req->out.h.error) {
 			if (!res)
@@ -1034,20 +1064,27 @@ static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
 		}
 	}
 	fuse_put_request(fc, req);
-	if (res > 0) {
-		if (write)
-			fuse_write_update_size(inode, pos);
+	if (res > 0)
 		*ppos = pos;
-	}
-	fuse_invalidate_attr(inode);
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(fuse_direct_io);
 
 static ssize_t fuse_direct_read(struct file *file, char __user *buf,
 				     size_t count, loff_t *ppos)
 {
-	return fuse_direct_io(file, buf, count, ppos, 0);
+	ssize_t res;
+	struct inode *inode = file->f_path.dentry->d_inode;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
+	res = fuse_direct_io(file, buf, count, ppos, 0);
+
+	fuse_invalidate_attr(inode);
+
+	return res;
 }
 
 static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
@@ -1055,12 +1092,22 @@ static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
 {
 	struct inode *inode = file->f_path.dentry->d_inode;
 	ssize_t res;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
 	/* Don't allow parallel writes to the same file */
 	mutex_lock(&inode->i_mutex);
 	res = generic_write_checks(file, ppos, &count, 0);
-	if (!res)
+	if (!res) {
 		res = fuse_direct_io(file, buf, count, ppos, 1);
+		if (res > 0)
+			fuse_write_update_size(inode, *ppos);
+	}
 	mutex_unlock(&inode->i_mutex);
+
+	fuse_invalidate_attr(inode);
+
 	return res;
 }
 
@@ -1177,9 +1224,10 @@ static int fuse_writepage_locked(struct page *page)
 	req->ff = fuse_file_get(ff);
 	spin_unlock(&fc->lock);
 
-	fuse_write_fill(req, NULL, ff, inode, page_offset(page), 0, 1);
+	fuse_write_fill(req, ff, page_offset(page), 0);
 
 	copy_highpage(tmp_page, page);
+	req->misc.write.in.write_flags |= FUSE_WRITE_CACHE;
 	req->in.argpages = 1;
 	req->num_pages = 1;
 	req->pages[0] = tmp_page;
@@ -1603,12 +1651,11 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov,
  * limits ioctl data transfers to well-formed ioctls and is the forced
  * behavior for all FUSE servers.
  */
-static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
-			       unsigned long arg, unsigned int flags)
+long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
+		   unsigned int flags)
 {
-	struct inode *inode = file->f_dentry->d_inode;
 	struct fuse_file *ff = file->private_data;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_ioctl_in inarg = {
 		.fh = ff->fh,
 		.cmd = cmd,
@@ -1627,13 +1674,6 @@ static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
 	/* assume all the iovs returned by client always fits in a page */
 	BUILD_BUG_ON(sizeof(struct iovec) * FUSE_IOCTL_MAX_IOV > PAGE_SIZE);
 
-	if (!fuse_allow_task(fc, current))
-		return -EACCES;
-
-	err = -EIO;
-	if (is_bad_inode(inode))
-		goto out;
-
 	err = -ENOMEM;
 	pages = kzalloc(sizeof(pages[0]) * FUSE_MAX_PAGES_PER_REQ, GFP_KERNEL);
 	iov_page = alloc_page(GFP_KERNEL);
@@ -1694,7 +1734,7 @@ static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
 
 	/* okay, let's send it to the client */
 	req->in.h.opcode = FUSE_IOCTL;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -1777,17 +1817,33 @@ static long fuse_file_do_ioctl(struct file *file, unsigned int cmd,
 
 	return err ? err : outarg.result;
 }
+EXPORT_SYMBOL_GPL(fuse_do_ioctl);
+
+static long fuse_file_ioctl_common(struct file *file, unsigned int cmd,
+				   unsigned long arg, unsigned int flags)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	struct fuse_conn *fc = get_fuse_conn(inode);
+
+	if (!fuse_allow_task(fc, current))
+		return -EACCES;
+
+	if (is_bad_inode(inode))
+		return -EIO;
+
+	return fuse_do_ioctl(file, cmd, arg, flags);
+}
 
 static long fuse_file_ioctl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
 {
-	return fuse_file_do_ioctl(file, cmd, arg, 0);
+	return fuse_file_ioctl_common(file, cmd, arg, 0);
 }
 
 static long fuse_file_compat_ioctl(struct file *file, unsigned int cmd,
 				   unsigned long arg)
 {
-	return fuse_file_do_ioctl(file, cmd, arg, FUSE_IOCTL_COMPAT);
+	return fuse_file_ioctl_common(file, cmd, arg, FUSE_IOCTL_COMPAT);
 }
 
 /*
@@ -1841,11 +1897,10 @@ static void fuse_register_polled_file(struct fuse_conn *fc,
 	spin_unlock(&fc->lock);
 }
 
-static unsigned fuse_file_poll(struct file *file, poll_table *wait)
+unsigned fuse_file_poll(struct file *file, poll_table *wait)
 {
-	struct inode *inode = file->f_dentry->d_inode;
 	struct fuse_file *ff = file->private_data;
-	struct fuse_conn *fc = get_fuse_conn(inode);
+	struct fuse_conn *fc = ff->fc;
 	struct fuse_poll_in inarg = { .fh = ff->fh, .kh = ff->kh };
 	struct fuse_poll_out outarg;
 	struct fuse_req *req;
@@ -1870,7 +1925,7 @@ static unsigned fuse_file_poll(struct file *file, poll_table *wait)
 		return PTR_ERR(req);
 
 	req->in.h.opcode = FUSE_POLL;
-	req->in.h.nodeid = get_node_id(inode);
+	req->in.h.nodeid = ff->nodeid;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(inarg);
 	req->in.args[0].value = &inarg;
@@ -1889,6 +1944,7 @@ static unsigned fuse_file_poll(struct file *file, poll_table *wait)
 	}
 	return POLLERR;
 }
+EXPORT_SYMBOL_GPL(fuse_file_poll);
 
 /*
  * This is called from fuse_handle_notify() on FUSE_NOTIFY_POLL and
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 6fc5aedaa0d..aaf2f9ff970 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -97,8 +97,13 @@ struct fuse_inode {
 	struct list_head writepages;
 };
 
+struct fuse_conn;
+
 /** FUSE specific file data */
 struct fuse_file {
+	/** Fuse connection for this file */
+	struct fuse_conn *fc;
+
 	/** Request reserved for flush and release */
 	struct fuse_req *reserved_req;
 
@@ -108,9 +113,15 @@ struct fuse_file {
 	/** File handle used by userspace */
 	u64 fh;
 
+	/** Node id of this file */
+	u64 nodeid;
+
 	/** Refcount */
 	atomic_t count;
 
+	/** FOPEN_* flags returned by open */
+	u32 open_flags;
+
 	/** Entry on inode's write_files list */
 	struct list_head write_entry;
 
@@ -185,8 +196,6 @@ enum fuse_req_state {
 	FUSE_REQ_FINISHED
 };
 
-struct fuse_conn;
-
 /**
  * A request to the client
  */
@@ -248,11 +257,12 @@ struct fuse_req {
 		struct fuse_forget_in forget_in;
 		struct {
 			struct fuse_release_in in;
-			struct vfsmount *vfsmount;
-			struct dentry *dentry;
+			struct path path;
 		} release;
 		struct fuse_init_in init_in;
 		struct fuse_init_out init_out;
+		struct cuse_init_in cuse_init_in;
+		struct cuse_init_out cuse_init_out;
 		struct {
 			struct fuse_read_in in;
 			u64 attr_ver;
@@ -386,6 +396,9 @@ struct fuse_conn {
 	/** Filesystem supports NFS exporting.  Only set in INIT */
 	unsigned export_support:1;
 
+	/** Set if bdi is valid */
+	unsigned bdi_initialized:1;
+
 	/*
 	 * The following bitfields are only for optimization purposes
 	 * and hence races in setting them will not cause malfunction
@@ -515,25 +528,24 @@ void fuse_send_forget(struct fuse_conn *fc, struct fuse_req *req,
  * Initialize READ or READDIR request
  */
 void fuse_read_fill(struct fuse_req *req, struct file *file,
-		    struct inode *inode, loff_t pos, size_t count, int opcode);
+		    loff_t pos, size_t count, int opcode);
 
 /**
  * Send OPEN or OPENDIR request
  */
-int fuse_open_common(struct inode *inode, struct file *file, int isdir);
+int fuse_open_common(struct inode *inode, struct file *file, bool isdir);
 
 struct fuse_file *fuse_file_alloc(struct fuse_conn *fc);
+struct fuse_file *fuse_file_get(struct fuse_file *ff);
 void fuse_file_free(struct fuse_file *ff);
-void fuse_finish_open(struct inode *inode, struct file *file,
-		      struct fuse_file *ff, struct fuse_open_out *outarg);
+void fuse_finish_open(struct inode *inode, struct file *file);
 
-/** Fill in ff->reserved_req with a RELEASE request */
-void fuse_release_fill(struct fuse_file *ff, u64 nodeid, int flags, int opcode);
+void fuse_sync_release(struct fuse_file *ff, int flags);
 
 /**
  * Send RELEASE or RELEASEDIR request
  */
-int fuse_release_common(struct inode *inode, struct file *file, int isdir);
+void fuse_release_common(struct file *file, int opcode);
 
 /**
  * Send FSYNC or FSYNCDIR request
@@ -652,10 +664,12 @@ void fuse_invalidate_entry_cache(struct dentry *entry);
  */
 struct fuse_conn *fuse_conn_get(struct fuse_conn *fc);
 
+void fuse_conn_kill(struct fuse_conn *fc);
+
 /**
  * Initialize fuse_conn
  */
-int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb);
+void fuse_conn_init(struct fuse_conn *fc);
 
 /**
  * Release reference to fuse_conn
@@ -694,4 +708,13 @@ void fuse_release_nowrite(struct inode *inode);
 
 u64 fuse_get_attr_version(struct fuse_conn *fc);
 
+int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
+		 bool isdir);
+ssize_t fuse_direct_io(struct file *file, const char __user *buf,
+		       size_t count, loff_t *ppos, int write);
+long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
+		   unsigned int flags);
+unsigned fuse_file_poll(struct file *file, poll_table *wait);
+int fuse_dev_release(struct inode *inode, struct file *file);
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 91f7c85f1ff..f0df55a5292 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -277,11 +277,14 @@ static void fuse_send_destroy(struct fuse_conn *fc)
 	}
 }
 
-static void fuse_put_super(struct super_block *sb)
+static void fuse_bdi_destroy(struct fuse_conn *fc)
 {
-	struct fuse_conn *fc = get_fuse_conn_super(sb);
+	if (fc->bdi_initialized)
+		bdi_destroy(&fc->bdi);
+}
 
-	fuse_send_destroy(fc);
+void fuse_conn_kill(struct fuse_conn *fc)
+{
 	spin_lock(&fc->lock);
 	fc->connected = 0;
 	fc->blocked = 0;
@@ -295,7 +298,16 @@ static void fuse_put_super(struct super_block *sb)
 	list_del(&fc->entry);
 	fuse_ctl_remove_conn(fc);
 	mutex_unlock(&fuse_mutex);
-	bdi_destroy(&fc->bdi);
+	fuse_bdi_destroy(fc);
+}
+EXPORT_SYMBOL_GPL(fuse_conn_kill);
+
+static void fuse_put_super(struct super_block *sb)
+{
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+	fuse_send_destroy(fc);
+	fuse_conn_kill(fc);
 	fuse_conn_put(fc);
 }
 
@@ -466,10 +478,8 @@ static int fuse_show_options(struct seq_file *m, struct vfsmount *mnt)
 	return 0;
 }
 
-int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb)
+void fuse_conn_init(struct fuse_conn *fc)
 {
-	int err;
-
 	memset(fc, 0, sizeof(*fc));
 	spin_lock_init(&fc->lock);
 	mutex_init(&fc->inst_mutex);
@@ -484,49 +494,12 @@ int fuse_conn_init(struct fuse_conn *fc, struct super_block *sb)
 	INIT_LIST_HEAD(&fc->bg_queue);
 	INIT_LIST_HEAD(&fc->entry);
 	atomic_set(&fc->num_waiting, 0);
-	fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
-	fc->bdi.unplug_io_fn = default_unplug_io_fn;
-	/* fuse does it's own writeback accounting */
-	fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
 	fc->khctr = 0;
 	fc->polled_files = RB_ROOT;
-	fc->dev = sb->s_dev;
-	err = bdi_init(&fc->bdi);
-	if (err)
-		goto error_mutex_destroy;
-	if (sb->s_bdev) {
-		err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
-				   MAJOR(fc->dev), MINOR(fc->dev));
-	} else {
-		err = bdi_register_dev(&fc->bdi, fc->dev);
-	}
-	if (err)
-		goto error_bdi_destroy;
-	/*
-	 * For a single fuse filesystem use max 1% of dirty +
-	 * writeback threshold.
-	 *
-	 * This gives about 1M of write buffer for memory maps on a
-	 * machine with 1G and 10% dirty_ratio, which should be more
-	 * than enough.
-	 *
-	 * Privileged users can raise it by writing to
-	 *
-	 *    /sys/class/bdi/<bdi>/max_ratio
-	 */
-	bdi_set_max_ratio(&fc->bdi, 1);
 	fc->reqctr = 0;
 	fc->blocked = 1;
 	fc->attr_version = 1;
 	get_random_bytes(&fc->scramble_key, sizeof(fc->scramble_key));
-
-	return 0;
-
- error_bdi_destroy:
-	bdi_destroy(&fc->bdi);
- error_mutex_destroy:
-	mutex_destroy(&fc->inst_mutex);
-	return err;
 }
 EXPORT_SYMBOL_GPL(fuse_conn_init);
 
@@ -539,12 +512,14 @@ void fuse_conn_put(struct fuse_conn *fc)
 		fc->release(fc);
 	}
 }
+EXPORT_SYMBOL_GPL(fuse_conn_put);
 
 struct fuse_conn *fuse_conn_get(struct fuse_conn *fc)
 {
 	atomic_inc(&fc->count);
 	return fc;
 }
+EXPORT_SYMBOL_GPL(fuse_conn_get);
 
 static struct inode *fuse_get_root_inode(struct super_block *sb, unsigned mode)
 {
@@ -797,6 +772,48 @@ static void fuse_free_conn(struct fuse_conn *fc)
 	kfree(fc);
 }
 
+static int fuse_bdi_init(struct fuse_conn *fc, struct super_block *sb)
+{
+	int err;
+
+	fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
+	fc->bdi.unplug_io_fn = default_unplug_io_fn;
+	/* fuse does it's own writeback accounting */
+	fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
+
+	err = bdi_init(&fc->bdi);
+	if (err)
+		return err;
+
+	fc->bdi_initialized = 1;
+
+	if (sb->s_bdev) {
+		err =  bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+				    MAJOR(fc->dev), MINOR(fc->dev));
+	} else {
+		err = bdi_register_dev(&fc->bdi, fc->dev);
+	}
+
+	if (err)
+		return err;
+
+	/*
+	 * For a single fuse filesystem use max 1% of dirty +
+	 * writeback threshold.
+	 *
+	 * This gives about 1M of write buffer for memory maps on a
+	 * machine with 1G and 10% dirty_ratio, which should be more
+	 * than enough.
+	 *
+	 * Privileged users can raise it by writing to
+	 *
+	 *    /sys/class/bdi/<bdi>/max_ratio
+	 */
+	bdi_set_max_ratio(&fc->bdi, 1);
+
+	return 0;
+}
+
 static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct fuse_conn *fc;
@@ -843,11 +860,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	if (!fc)
 		goto err_fput;
 
-	err = fuse_conn_init(fc, sb);
-	if (err) {
-		kfree(fc);
-		goto err_fput;
-	}
+	fuse_conn_init(fc);
+
+	fc->dev = sb->s_dev;
+	err = fuse_bdi_init(fc, sb);
+	if (err)
+		goto err_put_conn;
 
 	fc->release = fuse_free_conn;
 	fc->flags = d.flags;
@@ -911,7 +929,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
  err_put_root:
 	dput(root_dentry);
  err_put_conn:
-	bdi_destroy(&fc->bdi);
+	fuse_bdi_destroy(fc);
 	fuse_conn_put(fc);
  err_fput:
 	fput(file);
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index 3a981b7f64c..cad957cdb1e 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -7,6 +7,7 @@ config GFS2_FS
 	select IP_SCTP if DLM_SCTP
 	select FS_POSIX_ACL
 	select CRC32
+	select SLOW_WORK
 	help
 	  A cluster filesystem.
 
diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile
index a851ea4bdf7..3da2f1f4f73 100644
--- a/fs/gfs2/Makefile
+++ b/fs/gfs2/Makefile
@@ -1,8 +1,9 @@
+EXTRA_CFLAGS := -I$(src)
 obj-$(CONFIG_GFS2_FS) += gfs2.o
 gfs2-y := acl.o bmap.o dir.o eaops.o eattr.o glock.o \
 	glops.o inode.o log.o lops.o main.o meta_io.o \
-	mount.o ops_address.o ops_dentry.o ops_export.o ops_file.o \
-	ops_fstype.o ops_inode.o ops_super.o quota.o \
+	aops.o dentry.o export.o file.o \
+	ops_fstype.o ops_inode.o quota.o \
 	recovery.o rgrp.o super.o sys.o trans.o util.o
 
 gfs2-$(CONFIG_GFS2_FS_LOCKING_DLM) += lock_dlm.o
diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/aops.c
index a6dde1751e1..03ebb439ace 100644
--- a/fs/gfs2/ops_address.c
+++ b/fs/gfs2/aops.c
@@ -28,7 +28,6 @@
 #include "inode.h"
 #include "log.h"
 #include "meta_io.h"
-#include "ops_address.h"
 #include "quota.h"
 #include "trans.h"
 #include "rgrp.h"
@@ -781,10 +780,12 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 	unlock_page(page);
 	page_cache_release(page);
 
-	if (inode->i_size < to) {
-		i_size_write(inode, to);
-		ip->i_disksize = inode->i_size;
-		di->di_size = cpu_to_be64(inode->i_size);
+	if (copied) {
+		if (inode->i_size < to) {
+			i_size_write(inode, to);
+			ip->i_disksize = inode->i_size;
+		}
+		gfs2_dinode_out(ip, di);
 		mark_inode_dirty(inode);
 	}
 
@@ -824,7 +825,6 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
 	struct buffer_head *dibh;
 	struct gfs2_alloc *al = ip->i_alloc;
-	struct gfs2_dinode *di;
 	unsigned int from = pos & (PAGE_CACHE_SIZE - 1);
 	unsigned int to = from + len;
 	int ret;
@@ -847,11 +847,10 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
 		gfs2_page_add_databufs(ip, page, from, to);
 
 	ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
-
-	if (likely(ret >= 0) && (inode->i_size > ip->i_disksize)) {
-		di = (struct gfs2_dinode *)dibh->b_data;
-		ip->i_disksize = inode->i_size;
-		di->di_size = cpu_to_be64(inode->i_size);
+	if (ret > 0) {
+		if (inode->i_size > ip->i_disksize)
+			ip->i_disksize = inode->i_size;
+		gfs2_dinode_out(ip, dibh->b_data);
 		mark_inode_dirty(inode);
 	}
 
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 3a5d3f883e1..6d47379e794 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -25,7 +25,7 @@
 #include "trans.h"
 #include "dir.h"
 #include "util.h"
-#include "ops_address.h"
+#include "trace_gfs2.h"
 
 /* This doesn't need to be that large as max 64 bit pointers in a 4k
  * block is 512, so __u16 is fine for that. It saves stack space to
@@ -136,7 +136,9 @@ int gfs2_unstuff_dinode(struct gfs2_inode *ip, struct page *page)
 		   and write it out to disk */
 
 		unsigned int n = 1;
-		block = gfs2_alloc_block(ip, &n);
+		error = gfs2_alloc_block(ip, &block, &n);
+		if (error)
+			goto out_brelse;
 		if (isdir) {
 			gfs2_trans_add_unrevoke(GFS2_SB(&ip->i_inode), block, 1);
 			error = gfs2_dir_get_new_buffer(ip, block, &bh);
@@ -476,8 +478,11 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock,
 	blks = dblks + iblks;
 	i = sheight;
 	do {
+		int error;
 		n = blks - alloced;
-		bn = gfs2_alloc_block(ip, &n);
+		error = gfs2_alloc_block(ip, &bn, &n);
+		if (error)
+			return error;
 		alloced += n;
 		if (state != ALLOC_DATA || gfs2_is_jdata(ip))
 			gfs2_trans_add_unrevoke(sdp, bn, n);
@@ -585,6 +590,7 @@ int gfs2_block_map(struct inode *inode, sector_t lblock,
 	clear_buffer_mapped(bh_map);
 	clear_buffer_new(bh_map);
 	clear_buffer_boundary(bh_map);
+	trace_gfs2_bmap(ip, bh_map, lblock, create, 1);
 	if (gfs2_is_dir(ip)) {
 		bsize = sdp->sd_jbsize;
 		arr = sdp->sd_jheightsize;
@@ -619,6 +625,7 @@ int gfs2_block_map(struct inode *inode, sector_t lblock,
 	ret = 0;
 out:
 	release_metapath(&mp);
+	trace_gfs2_bmap(ip, bh_map, lblock, create, ret);
 	bmap_unlock(ip, create);
 	return ret;
 
@@ -1008,7 +1015,7 @@ static int gfs2_block_truncate_page(struct address_space *mapping)
 		gfs2_trans_add_bh(ip->i_gl, bh, 0);
 
 	zero_user(page, offset, length);
-
+	mark_buffer_dirty(bh);
 unlock:
 	unlock_page(page);
 	page_cache_release(page);
diff --git a/fs/gfs2/ops_dentry.c b/fs/gfs2/dentry.c
index 022c66cd560..022c66cd560 100644
--- a/fs/gfs2/ops_dentry.c
+++ b/fs/gfs2/dentry.c
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index aef4d0c0674..297d7e5ceba 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -803,13 +803,20 @@ static struct gfs2_leaf *new_leaf(struct inode *inode, struct buffer_head **pbh,
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	unsigned int n = 1;
-	u64 bn = gfs2_alloc_block(ip, &n);
-	struct buffer_head *bh = gfs2_meta_new(ip->i_gl, bn);
+	u64 bn;
+	int error;
+	struct buffer_head *bh;
 	struct gfs2_leaf *leaf;
 	struct gfs2_dirent *dent;
 	struct qstr name = { .name = "", .len = 0, .hash = 0 };
+
+	error = gfs2_alloc_block(ip, &bn, &n);
+	if (error)
+		return NULL;
+	bh = gfs2_meta_new(ip->i_gl, bn);
 	if (!bh)
 		return NULL;
+
 	gfs2_trans_add_unrevoke(GFS2_SB(inode), bn, 1);
 	gfs2_trans_add_bh(ip->i_gl, bh, 1);
 	gfs2_metatype_set(bh, GFS2_METATYPE_LF, GFS2_FORMAT_LF);
diff --git a/fs/gfs2/eattr.c b/fs/gfs2/eattr.c
index 899763aed21..07ea9529add 100644
--- a/fs/gfs2/eattr.c
+++ b/fs/gfs2/eattr.c
@@ -582,8 +582,11 @@ static int ea_alloc_blk(struct gfs2_inode *ip, struct buffer_head **bhp)
 	struct gfs2_ea_header *ea;
 	unsigned int n = 1;
 	u64 block;
+	int error;
 
-	block = gfs2_alloc_block(ip, &n);
+	error = gfs2_alloc_block(ip, &block, &n);
+	if (error)
+		return error;
 	gfs2_trans_add_unrevoke(sdp, block, 1);
 	*bhp = gfs2_meta_new(ip->i_gl, block);
 	gfs2_trans_add_bh(ip->i_gl, *bhp, 1);
@@ -617,6 +620,7 @@ static int ea_write(struct gfs2_inode *ip, struct gfs2_ea_header *ea,
 		    struct gfs2_ea_request *er)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	int error;
 
 	ea->ea_data_len = cpu_to_be32(er->er_data_len);
 	ea->ea_name_len = er->er_name_len;
@@ -642,7 +646,9 @@ static int ea_write(struct gfs2_inode *ip, struct gfs2_ea_header *ea,
 			int mh_size = sizeof(struct gfs2_meta_header);
 			unsigned int n = 1;
 
-			block = gfs2_alloc_block(ip, &n);
+			error = gfs2_alloc_block(ip, &block, &n);
+			if (error)
+				return error;
 			gfs2_trans_add_unrevoke(sdp, block, 1);
 			bh = gfs2_meta_new(ip->i_gl, block);
 			gfs2_trans_add_bh(ip->i_gl, bh, 1);
@@ -963,7 +969,9 @@ static int ea_set_block(struct gfs2_inode *ip, struct gfs2_ea_request *er,
 	} else {
 		u64 blk;
 		unsigned int n = 1;
-		blk = gfs2_alloc_block(ip, &n);
+		error = gfs2_alloc_block(ip, &blk, &n);
+		if (error)
+			return error;
 		gfs2_trans_add_unrevoke(sdp, blk, 1);
 		indbh = gfs2_meta_new(ip->i_gl, blk);
 		gfs2_trans_add_bh(ip->i_gl, indbh, 1);
diff --git a/fs/gfs2/ops_export.c b/fs/gfs2/export.c
index 9200ef22171..9200ef22171 100644
--- a/fs/gfs2/ops_export.c
+++ b/fs/gfs2/export.c
diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/file.c
index 5d82e91887e..73318a3ce6f 100644
--- a/fs/gfs2/ops_file.c
+++ b/fs/gfs2/file.c
@@ -39,7 +39,6 @@
 #include "trans.h"
 #include "util.h"
 #include "eaops.h"
-#include "ops_address.h"
 
 /**
  * gfs2_llseek - seek to a location in a file
@@ -425,33 +424,36 @@ static struct vm_operations_struct gfs2_vm_ops = {
 	.page_mkwrite = gfs2_page_mkwrite,
 };
 
-
 /**
  * gfs2_mmap -
  * @file: The file to map
  * @vma: The VMA which described the mapping
  *
- * Returns: 0 or error code
+ * There is no need to get a lock here unless we should be updating
+ * atime. We ignore any locking errors since the only consequence is
+ * a missed atime update (which will just be deferred until later).
+ *
+ * Returns: 0
  */
 
 static int gfs2_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct gfs2_inode *ip = GFS2_I(file->f_mapping->host);
-	struct gfs2_holder i_gh;
-	int error;
 
-	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
-	error = gfs2_glock_nq(&i_gh);
-	if (error) {
-		gfs2_holder_uninit(&i_gh);
-		return error;
-	}
+	if (!(file->f_flags & O_NOATIME)) {
+		struct gfs2_holder i_gh;
+		int error;
 
+		gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
+		error = gfs2_glock_nq(&i_gh);
+		file_accessed(file);
+		if (error == 0)
+			gfs2_glock_dq_uninit(&i_gh);
+	}
 	vma->vm_ops = &gfs2_vm_ops;
+	vma->vm_flags |= VM_CAN_NONLINEAR;
 
-	gfs2_glock_dq_uninit(&i_gh);
-
-	return error;
+	return 0;
 }
 
 /**
@@ -692,12 +694,10 @@ static void do_unflock(struct file *file, struct file_lock *fl)
 
 static int gfs2_flock(struct file *file, int cmd, struct file_lock *fl)
 {
-	struct gfs2_inode *ip = GFS2_I(file->f_mapping->host);
-
 	if (!(fl->fl_flags & FL_FLOCK))
 		return -ENOLCK;
-	if (__mandatory_lock(&ip->i_inode))
-		return -ENOLCK;
+	if (fl->fl_type & LOCK_MAND)
+		return -EOPNOTSUPP;
 
 	if (fl->fl_type == F_UNLCK) {
 		do_unflock(file, fl);
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ff498109048..297421c0427 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -39,6 +39,8 @@
 #include "super.h"
 #include "util.h"
 #include "bmap.h"
+#define CREATE_TRACE_POINTS
+#include "trace_gfs2.h"
 
 struct gfs2_gl_hash_bucket {
         struct hlist_head hb_list;
@@ -155,7 +157,7 @@ static void glock_free(struct gfs2_glock *gl)
 
 	if (aspace)
 		gfs2_aspace_put(aspace);
-
+	trace_gfs2_glock_put(gl);
 	sdp->sd_lockstruct.ls_ops->lm_put_lock(gfs2_glock_cachep, gl);
 }
 
@@ -317,14 +319,17 @@ restart:
 						return 2;
 					gh->gh_error = ret;
 					list_del_init(&gh->gh_list);
+					trace_gfs2_glock_queue(gh, 0);
 					gfs2_holder_wake(gh);
 					goto restart;
 				}
 				set_bit(HIF_HOLDER, &gh->gh_iflags);
+				trace_gfs2_promote(gh, 1);
 				gfs2_holder_wake(gh);
 				goto restart;
 			}
 			set_bit(HIF_HOLDER, &gh->gh_iflags);
+			trace_gfs2_promote(gh, 0);
 			gfs2_holder_wake(gh);
 			continue;
 		}
@@ -354,6 +359,7 @@ static inline void do_error(struct gfs2_glock *gl, const int ret)
 		else
 			continue;
 		list_del_init(&gh->gh_list);
+		trace_gfs2_glock_queue(gh, 0);
 		gfs2_holder_wake(gh);
 	}
 }
@@ -422,6 +428,7 @@ static void finish_xmote(struct gfs2_glock *gl, unsigned int ret)
 	int rv;
 
 	spin_lock(&gl->gl_spin);
+	trace_gfs2_glock_state_change(gl, state);
 	state_change(gl, state);
 	gh = find_first_waiter(gl);
 
@@ -796,22 +803,37 @@ void gfs2_holder_uninit(struct gfs2_holder *gh)
 	gh->gh_ip = 0;
 }
 
-static int just_schedule(void *word)
+/**
+ * gfs2_glock_holder_wait
+ * @word: unused
+ *
+ * This function and gfs2_glock_demote_wait both show up in the WCHAN
+ * field. Thus I've separated these otherwise identical functions in
+ * order to be more informative to the user.
+ */
+
+static int gfs2_glock_holder_wait(void *word)
 {
         schedule();
         return 0;
 }
 
+static int gfs2_glock_demote_wait(void *word)
+{
+	schedule();
+	return 0;
+}
+
 static void wait_on_holder(struct gfs2_holder *gh)
 {
 	might_sleep();
-	wait_on_bit(&gh->gh_iflags, HIF_WAIT, just_schedule, TASK_UNINTERRUPTIBLE);
+	wait_on_bit(&gh->gh_iflags, HIF_WAIT, gfs2_glock_holder_wait, TASK_UNINTERRUPTIBLE);
 }
 
 static void wait_on_demote(struct gfs2_glock *gl)
 {
 	might_sleep();
-	wait_on_bit(&gl->gl_flags, GLF_DEMOTE, just_schedule, TASK_UNINTERRUPTIBLE);
+	wait_on_bit(&gl->gl_flags, GLF_DEMOTE, gfs2_glock_demote_wait, TASK_UNINTERRUPTIBLE);
 }
 
 /**
@@ -836,6 +858,7 @@ static void handle_callback(struct gfs2_glock *gl, unsigned int state,
 			gl->gl_demote_state != state) {
 		gl->gl_demote_state = LM_ST_UNLOCKED;
 	}
+	trace_gfs2_demote_rq(gl);
 }
 
 /**
@@ -921,6 +944,7 @@ fail:
 			goto do_cancel;
 		return;
 	}
+	trace_gfs2_glock_queue(gh, 1);
 	list_add_tail(&gh->gh_list, insert_pt);
 do_cancel:
 	gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
@@ -1017,6 +1041,7 @@ void gfs2_glock_dq(struct gfs2_holder *gh)
 		    !test_bit(GLF_DEMOTE, &gl->gl_flags))
 			fast_path = 1;
 	}
+	trace_gfs2_glock_queue(gh, 0);
 	spin_unlock(&gl->gl_spin);
 	if (likely(fast_path))
 		return;
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 70f87f43afa..d5e4ab155ca 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -310,24 +310,6 @@ static void rgrp_go_unlock(struct gfs2_holder *gh)
 }
 
 /**
- * rgrp_go_dump - print out an rgrp
- * @seq: The iterator
- * @gl: The glock in question
- *
- */
-
-static int rgrp_go_dump(struct seq_file *seq, const struct gfs2_glock *gl)
-{
-	const struct gfs2_rgrpd *rgd = gl->gl_object;
-	if (rgd == NULL)
-		return 0;
-	gfs2_print_dbg(seq, " R: n:%llu f:%02x b:%u/%u i:%u\n",
-		       (unsigned long long)rgd->rd_addr, rgd->rd_flags,
-		       rgd->rd_free, rgd->rd_free_clone, rgd->rd_dinodes);
-	return 0;
-}
-
-/**
  * trans_go_sync - promote/demote the transaction glock
  * @gl: the glock
  * @state: the requested state
@@ -410,7 +392,7 @@ const struct gfs2_glock_operations gfs2_rgrp_glops = {
 	.go_demote_ok = rgrp_go_demote_ok,
 	.go_lock = rgrp_go_lock,
 	.go_unlock = rgrp_go_unlock,
-	.go_dump = rgrp_go_dump,
+	.go_dump = gfs2_rgrp_dump,
 	.go_type = LM_TYPE_RGRP,
 	.go_min_hold_time = HZ / 5,
 };
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 399d1b97804..225347fbff3 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -12,6 +12,7 @@
 
 #include <linux/fs.h>
 #include <linux/workqueue.h>
+#include <linux/slow-work.h>
 #include <linux/dlm.h>
 #include <linux/buffer_head.h>
 
@@ -63,9 +64,12 @@ struct gfs2_log_element {
 	const struct gfs2_log_operations *le_ops;
 };
 
+#define GBF_FULL 1
+
 struct gfs2_bitmap {
 	struct buffer_head *bi_bh;
 	char *bi_clone;
+	unsigned long bi_flags;
 	u32 bi_offset;
 	u32 bi_start;
 	u32 bi_len;
@@ -90,10 +94,11 @@ struct gfs2_rgrpd {
 	struct gfs2_sbd *rd_sbd;
 	unsigned int rd_bh_count;
 	u32 rd_last_alloc;
-	unsigned char rd_flags;
-#define GFS2_RDF_CHECK        0x01      /* Need to check for unlinked inodes */
-#define GFS2_RDF_NOALLOC      0x02      /* rg prohibits allocation */
-#define GFS2_RDF_UPTODATE     0x04      /* rg is up to date */
+	u32 rd_flags;
+#define GFS2_RDF_CHECK		0x10000000 /* check for unlinked inodes */
+#define GFS2_RDF_UPTODATE	0x20000000 /* rg is up to date */
+#define GFS2_RDF_ERROR		0x40000000 /* error in rg */
+#define GFS2_RDF_MASK		0xf0000000 /* mask for internal flags */
 };
 
 enum gfs2_state_bits {
@@ -376,11 +381,11 @@ struct gfs2_journal_extent {
 struct gfs2_jdesc {
 	struct list_head jd_list;
 	struct list_head extent_list;
-
+	struct slow_work jd_work;
 	struct inode *jd_inode;
+	unsigned long jd_flags;
+#define JDF_RECOVERY 1
 	unsigned int jd_jid;
-	int jd_dirty;
-
 	unsigned int jd_blocks;
 };
 
@@ -390,9 +395,6 @@ struct gfs2_statfs_change_host {
 	s64 sc_dinodes;
 };
 
-#define GFS2_GLOCKD_DEFAULT	1
-#define GFS2_GLOCKD_MAX		16
-
 #define GFS2_QUOTA_DEFAULT	GFS2_QUOTA_OFF
 #define GFS2_QUOTA_OFF		0
 #define GFS2_QUOTA_ACCOUNT	1
@@ -418,6 +420,7 @@ struct gfs2_args {
 	unsigned int ar_data:2;			/* ordered/writeback */
 	unsigned int ar_meta:1;			/* mount metafs */
 	unsigned int ar_discard:1;		/* discard requests */
+	int ar_commit;				/* Commit interval */
 };
 
 struct gfs2_tune {
@@ -426,7 +429,6 @@ struct gfs2_tune {
 	unsigned int gt_incore_log_blocks;
 	unsigned int gt_log_flush_secs;
 
-	unsigned int gt_recoverd_secs;
 	unsigned int gt_logd_secs;
 
 	unsigned int gt_quota_simul_sync; /* Max quotavals to sync at once */
@@ -447,6 +449,7 @@ enum {
 	SDF_JOURNAL_LIVE	= 1,
 	SDF_SHUTDOWN		= 2,
 	SDF_NOBARRIERS		= 3,
+	SDF_NORECOVERY		= 4,
 };
 
 #define GFS2_FSNAME_LEN		256
@@ -493,7 +496,6 @@ struct lm_lockstruct {
 	unsigned long ls_flags;
 	dlm_lockspace_t *ls_dlm;
 
-	int ls_recover_jid;
 	int ls_recover_jid_done;
 	int ls_recover_jid_status;
 };
@@ -582,7 +584,6 @@ struct gfs2_sbd {
 
 	/* Daemon stuff */
 
-	struct task_struct *sd_recoverd_process;
 	struct task_struct *sd_logd_process;
 	struct task_struct *sd_quotad_process;
 
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 5a31d426116..2f94bd72369 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -30,7 +30,6 @@
 #include "inode.h"
 #include "log.h"
 #include "meta_io.h"
-#include "ops_address.h"
 #include "quota.h"
 #include "rgrp.h"
 #include "trans.h"
@@ -1047,154 +1046,7 @@ fail:
 	return ERR_PTR(error);
 }
 
-/**
- * gfs2_rmdiri - Remove a directory
- * @dip: The parent directory of the directory to be removed
- * @name: The name of the directory to be removed
- * @ip: The GFS2 inode of the directory to be removed
- *
- * Assumes Glocks on dip and ip are held
- *
- * Returns: errno
- */
-
-int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
-		struct gfs2_inode *ip)
-{
-	struct qstr dotname;
-	int error;
-
-	if (ip->i_entries != 2) {
-		if (gfs2_consist_inode(ip))
-			gfs2_dinode_print(ip);
-		return -EIO;
-	}
-
-	error = gfs2_dir_del(dip, name);
-	if (error)
-		return error;
-
-	error = gfs2_change_nlink(dip, -1);
-	if (error)
-		return error;
-
-	gfs2_str2qstr(&dotname, ".");
-	error = gfs2_dir_del(ip, &dotname);
-	if (error)
-		return error;
-
-	gfs2_str2qstr(&dotname, "..");
-	error = gfs2_dir_del(ip, &dotname);
-	if (error)
-		return error;
-
-	/* It looks odd, but it really should be done twice */
-	error = gfs2_change_nlink(ip, -1);
-	if (error)
-		return error;
-
-	error = gfs2_change_nlink(ip, -1);
-	if (error)
-		return error;
-
-	return error;
-}
-
-/*
- * gfs2_unlink_ok - check to see that a inode is still in a directory
- * @dip: the directory
- * @name: the name of the file
- * @ip: the inode
- *
- * Assumes that the lock on (at least) @dip is held.
- *
- * Returns: 0 if the parent/child relationship is correct, errno if it isn't
- */
-
-int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
-		   const struct gfs2_inode *ip)
-{
-	int error;
-
-	if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
-		return -EPERM;
-
-	if ((dip->i_inode.i_mode & S_ISVTX) &&
-	    dip->i_inode.i_uid != current_fsuid() &&
-	    ip->i_inode.i_uid != current_fsuid() && !capable(CAP_FOWNER))
-		return -EPERM;
-
-	if (IS_APPEND(&dip->i_inode))
-		return -EPERM;
-
-	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC);
-	if (error)
-		return error;
-
-	error = gfs2_dir_check(&dip->i_inode, name, ip);
-	if (error)
-		return error;
-
-	return 0;
-}
-
-/**
- * gfs2_readlinki - return the contents of a symlink
- * @ip: the symlink's inode
- * @buf: a pointer to the buffer to be filled
- * @len: a pointer to the length of @buf
- *
- * If @buf is too small, a piece of memory is kmalloc()ed and needs
- * to be freed by the caller.
- *
- * Returns: errno
- */
-
-int gfs2_readlinki(struct gfs2_inode *ip, char **buf, unsigned int *len)
-{
-	struct gfs2_holder i_gh;
-	struct buffer_head *dibh;
-	unsigned int x;
-	int error;
-
-	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
-	error = gfs2_glock_nq(&i_gh);
-	if (error) {
-		gfs2_holder_uninit(&i_gh);
-		return error;
-	}
-
-	if (!ip->i_disksize) {
-		gfs2_consist_inode(ip);
-		error = -EIO;
-		goto out;
-	}
-
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-	if (error)
-		goto out;
-
-	x = ip->i_disksize + 1;
-	if (x > *len) {
-		*buf = kmalloc(x, GFP_NOFS);
-		if (!*buf) {
-			error = -ENOMEM;
-			goto out_brelse;
-		}
-	}
-
-	memcpy(*buf, dibh->b_data + sizeof(struct gfs2_dinode), x);
-	*len = x;
-
-out_brelse:
-	brelse(dibh);
-out:
-	gfs2_glock_dq_uninit(&i_gh);
-	return error;
-}
-
-static int
-__gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
+static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
 {
 	struct buffer_head *dibh;
 	int error;
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index c30be2b6658..c341aaf67ad 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -11,8 +11,16 @@
 #define __INODE_DOT_H__
 
 #include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <linux/mm.h>
 #include "util.h"
 
+extern int gfs2_releasepage(struct page *page, gfp_t gfp_mask);
+extern int gfs2_internal_read(struct gfs2_inode *ip,
+			      struct file_ra_state *ra_state,
+			      char *buf, loff_t *pos, unsigned size);
+extern void gfs2_set_aops(struct inode *inode);
+
 static inline int gfs2_is_stuffed(const struct gfs2_inode *ip)
 {
 	return !ip->i_height;
@@ -73,30 +81,26 @@ static inline void gfs2_inum_out(const struct gfs2_inode *ip,
 }
 
 
-void gfs2_set_iop(struct inode *inode);
-struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type, 
-				u64 no_addr, u64 no_formal_ino,
-				int skip_freeing);
-struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
-
-int gfs2_inode_refresh(struct gfs2_inode *ip);
-
-int gfs2_dinode_dealloc(struct gfs2_inode *inode);
-int gfs2_change_nlink(struct gfs2_inode *ip, int diff);
-struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
-			   int is_root);
-struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
-			   unsigned int mode, dev_t dev);
-int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
-		struct gfs2_inode *ip);
-int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
-		   const struct gfs2_inode *ip);
-int gfs2_permission(struct inode *inode, int mask);
-int gfs2_readlinki(struct gfs2_inode *ip, char **buf, unsigned int *len);
-int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr);
-struct inode *gfs2_lookup_simple(struct inode *dip, const char *name);
-void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf);
-void gfs2_dinode_print(const struct gfs2_inode *ip);
+extern void gfs2_set_iop(struct inode *inode);
+extern struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type, 
+				       u64 no_addr, u64 no_formal_ino,
+				       int skip_freeing);
+extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
+
+extern int gfs2_inode_refresh(struct gfs2_inode *ip);
+
+extern int gfs2_dinode_dealloc(struct gfs2_inode *inode);
+extern int gfs2_change_nlink(struct gfs2_inode *ip, int diff);
+extern struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
+				  int is_root);
+extern struct inode *gfs2_createi(struct gfs2_holder *ghs,
+				  const struct qstr *name,
+				  unsigned int mode, dev_t dev);
+extern int gfs2_permission(struct inode *inode, int mask);
+extern int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr);
+extern struct inode *gfs2_lookup_simple(struct inode *dip, const char *name);
+extern void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf);
+extern void gfs2_dinode_print(const struct gfs2_inode *ip);
 
 extern const struct inode_operations gfs2_file_iops;
 extern const struct inode_operations gfs2_dir_iops;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 98918a75641..13c6237c5f6 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -28,6 +28,7 @@
 #include "meta_io.h"
 #include "util.h"
 #include "dir.h"
+#include "trace_gfs2.h"
 
 #define PULL 1
 
@@ -120,7 +121,7 @@ __acquires(&sdp->sd_log_lock)
 			lock_buffer(bh);
 			if (test_clear_buffer_dirty(bh)) {
 				bh->b_end_io = end_buffer_write_sync;
-				submit_bh(WRITE, bh);
+				submit_bh(WRITE_SYNC_PLUG, bh);
 			} else {
 				unlock_buffer(bh);
 				brelse(bh);
@@ -313,6 +314,7 @@ int gfs2_log_reserve(struct gfs2_sbd *sdp, unsigned int blks)
 		gfs2_log_lock(sdp);
 	}
 	atomic_sub(blks, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, -blks);
 	gfs2_log_unlock(sdp);
 	mutex_unlock(&sdp->sd_log_reserve_mutex);
 
@@ -333,6 +335,7 @@ void gfs2_log_release(struct gfs2_sbd *sdp, unsigned int blks)
 
 	gfs2_log_lock(sdp);
 	atomic_add(blks, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, blks);
 	gfs2_assert_withdraw(sdp,
 			     atomic_read(&sdp->sd_log_blks_free) <= sdp->sd_jdesc->jd_blocks);
 	gfs2_log_unlock(sdp);
@@ -558,6 +561,7 @@ static void log_pull_tail(struct gfs2_sbd *sdp, unsigned int new_tail)
 
 	gfs2_log_lock(sdp);
 	atomic_add(dist, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, dist);
 	gfs2_assert_withdraw(sdp, atomic_read(&sdp->sd_log_blks_free) <= sdp->sd_jdesc->jd_blocks);
 	gfs2_log_unlock(sdp);
 
@@ -604,7 +608,7 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull)
 	if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
 		goto skip_barrier;
 	get_bh(bh);
-	submit_bh(WRITE_BARRIER | (1 << BIO_RW_META), bh);
+	submit_bh(WRITE_SYNC | (1 << BIO_RW_BARRIER) | (1 << BIO_RW_META), bh);
 	wait_on_buffer(bh);
 	if (buffer_eopnotsupp(bh)) {
 		clear_buffer_eopnotsupp(bh);
@@ -664,7 +668,7 @@ static void gfs2_ordered_write(struct gfs2_sbd *sdp)
 		lock_buffer(bh);
 		if (buffer_mapped(bh) && test_clear_buffer_dirty(bh)) {
 			bh->b_end_io = end_buffer_write_sync;
-			submit_bh(WRITE, bh);
+			submit_bh(WRITE_SYNC_PLUG, bh);
 		} else {
 			unlock_buffer(bh);
 			brelse(bh);
@@ -715,6 +719,7 @@ void __gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl)
 		up_write(&sdp->sd_log_flush_lock);
 		return;
 	}
+	trace_gfs2_log_flush(sdp, 1);
 
 	ai = kzalloc(sizeof(struct gfs2_ail), GFP_NOFS | __GFP_NOFAIL);
 	INIT_LIST_HEAD(&ai->ai_ail1_list);
@@ -746,6 +751,7 @@ void __gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl)
 	else if (sdp->sd_log_tail != current_tail(sdp) && !sdp->sd_log_idle){
 		gfs2_log_lock(sdp);
 		atomic_dec(&sdp->sd_log_blks_free); /* Adjust for unreserved buffer */
+		trace_gfs2_log_blocks(sdp, -1);
 		gfs2_log_unlock(sdp);
 		log_write_header(sdp, 0, PULL);
 	}
@@ -763,8 +769,7 @@ void __gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl)
 		ai = NULL;
 	}
 	gfs2_log_unlock(sdp);
-
-	sdp->sd_vfs->s_dirt = 0;
+	trace_gfs2_log_flush(sdp, 0);
 	up_write(&sdp->sd_log_flush_lock);
 
 	kfree(ai);
@@ -788,6 +793,7 @@ static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 	gfs2_assert_withdraw(sdp, sdp->sd_log_blks_reserved + tr->tr_reserved >= reserved);
 	unused = sdp->sd_log_blks_reserved - reserved + tr->tr_reserved;
 	atomic_add(unused, &sdp->sd_log_blks_free);
+	trace_gfs2_log_blocks(sdp, unused);
 	gfs2_assert_withdraw(sdp, atomic_read(&sdp->sd_log_blks_free) <=
 			     sdp->sd_jdesc->jd_blocks);
 	sdp->sd_log_blks_reserved = reserved;
@@ -823,7 +829,6 @@ void gfs2_log_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 	log_refund(sdp, tr);
 	buf_lo_incore_commit(sdp, tr);
 
-	sdp->sd_vfs->s_dirt = 1;
 	up_read(&sdp->sd_log_flush_lock);
 
 	gfs2_log_lock(sdp);
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 80e4f5f898b..9969ff062c5 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -13,6 +13,8 @@
 #include <linux/completion.h>
 #include <linux/buffer_head.h>
 #include <linux/gfs2_ondisk.h>
+#include <linux/bio.h>
+#include <linux/fs.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -25,6 +27,7 @@
 #include "rgrp.h"
 #include "trans.h"
 #include "util.h"
+#include "trace_gfs2.h"
 
 /**
  * gfs2_pin - Pin a buffer in memory
@@ -51,6 +54,7 @@ static void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh)
 	if (bd->bd_ail)
 		list_move(&bd->bd_ail_st_list, &bd->bd_ail->ai_ail2_list);
 	get_bh(bh);
+	trace_gfs2_pin(bd, 1);
 }
 
 /**
@@ -87,6 +91,7 @@ static void gfs2_unpin(struct gfs2_sbd *sdp, struct buffer_head *bh,
 	bd->bd_ail = ai;
 	list_add(&bd->bd_ail_st_list, &ai->ai_ail1_list);
 	clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
+	trace_gfs2_pin(bd, 0);
 	gfs2_log_unlock(sdp);
 	unlock_buffer(bh);
 }
@@ -189,7 +194,7 @@ static void buf_lo_before_commit(struct gfs2_sbd *sdp)
 		}
 
 		gfs2_log_unlock(sdp);
-		submit_bh(WRITE, bh);
+		submit_bh(WRITE_SYNC_PLUG, bh);
 		gfs2_log_lock(sdp);
 
 		n = 0;
@@ -199,7 +204,7 @@ static void buf_lo_before_commit(struct gfs2_sbd *sdp)
 			gfs2_log_unlock(sdp);
 			lock_buffer(bd2->bd_bh);
 			bh = gfs2_log_fake_buf(sdp, bd2->bd_bh);
-			submit_bh(WRITE, bh);
+			submit_bh(WRITE_SYNC_PLUG, bh);
 			gfs2_log_lock(sdp);
 			if (++n >= num)
 				break;
@@ -341,7 +346,7 @@ static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
 		sdp->sd_log_num_revoke--;
 
 		if (offset + sizeof(u64) > sdp->sd_sb.sb_bsize) {
-			submit_bh(WRITE, bh);
+			submit_bh(WRITE_SYNC_PLUG, bh);
 
 			bh = gfs2_log_get_buf(sdp);
 			mh = (struct gfs2_meta_header *)bh->b_data;
@@ -358,7 +363,7 @@ static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
 	}
 	gfs2_assert_withdraw(sdp, !sdp->sd_log_num_revoke);
 
-	submit_bh(WRITE, bh);
+	submit_bh(WRITE_SYNC_PLUG, bh);
 }
 
 static void revoke_lo_before_scan(struct gfs2_jdesc *jd,
@@ -560,7 +565,7 @@ static void gfs2_write_blocks(struct gfs2_sbd *sdp, struct buffer_head *bh,
 	ptr = bh_log_ptr(bh);
 	
 	get_bh(bh);
-	submit_bh(WRITE, bh);
+	submit_bh(WRITE_SYNC_PLUG, bh);
 	gfs2_log_lock(sdp);
 	while(!list_empty(list)) {
 		bd = list_entry(list->next, struct gfs2_bufdata, bd_le.le_list);
@@ -586,7 +591,7 @@ static void gfs2_write_blocks(struct gfs2_sbd *sdp, struct buffer_head *bh,
 		} else {
 			bh1 = gfs2_log_fake_buf(sdp, bd->bd_bh);
 		}
-		submit_bh(WRITE, bh1);
+		submit_bh(WRITE_SYNC_PLUG, bh1);
 		gfs2_log_lock(sdp);
 		ptr += 2;
 	}
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index a6892ed0840..eacd78a5d08 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/gfs2_ondisk.h>
 #include <asm/atomic.h>
+#include <linux/slow-work.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -113,12 +114,18 @@ static int __init init_gfs2_fs(void)
 	if (error)
 		goto fail_unregister;
 
+	error = slow_work_register_user();
+	if (error)
+		goto fail_slow;
+
 	gfs2_register_debugfs();
 
 	printk("GFS2 (built %s %s) installed\n", __DATE__, __TIME__);
 
 	return 0;
 
+fail_slow:
+	unregister_filesystem(&gfs2meta_fs_type);
 fail_unregister:
 	unregister_filesystem(&gfs2_fs_type);
 fail:
@@ -156,6 +163,7 @@ static void __exit exit_gfs2_fs(void)
 	gfs2_unregister_debugfs();
 	unregister_filesystem(&gfs2_fs_type);
 	unregister_filesystem(&gfs2meta_fs_type);
+	slow_work_unregister_user();
 
 	kmem_cache_destroy(gfs2_quotad_cachep);
 	kmem_cache_destroy(gfs2_rgrpd_cachep);
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 8d6f13256b2..cb8d7a93d5e 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -31,19 +31,66 @@
 #include "rgrp.h"
 #include "trans.h"
 #include "util.h"
-#include "ops_address.h"
 
-static int aspace_get_block(struct inode *inode, sector_t lblock,
-			    struct buffer_head *bh_result, int create)
+static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wbc)
 {
-	gfs2_assert_warn(inode->i_sb->s_fs_info, 0);
-	return -EOPNOTSUPP;
-}
+	int err;
+	struct buffer_head *bh, *head;
+	int nr_underway = 0;
+	int write_op = (1 << BIO_RW_META) | ((wbc->sync_mode == WB_SYNC_ALL ?
+			WRITE_SYNC_PLUG : WRITE));
+
+	BUG_ON(!PageLocked(page));
+	BUG_ON(!page_has_buffers(page));
+
+	head = page_buffers(page);
+	bh = head;
+
+	do {
+		if (!buffer_mapped(bh))
+			continue;
+		/*
+		 * If it's a fully non-blocking write attempt and we cannot
+		 * lock the buffer then redirty the page.  Note that this can
+		 * potentially cause a busy-wait loop from pdflush and kswapd
+		 * activity, but those code paths have their own higher-level
+		 * throttling.
+		 */
+		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
+			lock_buffer(bh);
+		} else if (!trylock_buffer(bh)) {
+			redirty_page_for_writepage(wbc, page);
+			continue;
+		}
+		if (test_clear_buffer_dirty(bh)) {
+			mark_buffer_async_write(bh);
+		} else {
+			unlock_buffer(bh);
+		}
+	} while ((bh = bh->b_this_page) != head);
+
+	/*
+	 * The page and its buffers are protected by PageWriteback(), so we can
+	 * drop the bh refcounts early.
+	 */
+	BUG_ON(PageWriteback(page));
+	set_page_writeback(page);
+
+	do {
+		struct buffer_head *next = bh->b_this_page;
+		if (buffer_async_write(bh)) {
+			submit_bh(write_op, bh);
+			nr_underway++;
+		}
+		bh = next;
+	} while (bh != head);
+	unlock_page(page);
 
-static int gfs2_aspace_writepage(struct page *page,
-				 struct writeback_control *wbc)
-{
-	return block_write_full_page(page, aspace_get_block, wbc);
+	err = 0;
+	if (nr_underway == 0)
+		end_page_writeback(page);
+
+	return err;
 }
 
 static const struct address_space_operations aspace_aops = {
@@ -201,16 +248,32 @@ struct buffer_head *gfs2_meta_new(struct gfs2_glock *gl, u64 blkno)
 int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags,
 		   struct buffer_head **bhp)
 {
-	*bhp = gfs2_getbuf(gl, blkno, CREATE);
-	if (!buffer_uptodate(*bhp)) {
-		ll_rw_block(READ_META, 1, bhp);
-		if (flags & DIO_WAIT) {
-			int error = gfs2_meta_wait(gl->gl_sbd, *bhp);
-			if (error) {
-				brelse(*bhp);
-				return error;
-			}
-		}
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	struct buffer_head *bh;
+
+	if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
+		return -EIO;
+
+	*bhp = bh = gfs2_getbuf(gl, blkno, CREATE);
+
+	lock_buffer(bh);
+	if (buffer_uptodate(bh)) {
+		unlock_buffer(bh);
+		return 0;
+	}
+	bh->b_end_io = end_buffer_read_sync;
+	get_bh(bh);
+	submit_bh(READ_SYNC | (1 << BIO_RW_META), bh);
+	if (!(flags & DIO_WAIT))
+		return 0;
+
+	wait_on_buffer(bh);
+	if (unlikely(!buffer_uptodate(bh))) {
+		struct gfs2_trans *tr = current->journal_info;
+		if (tr && tr->tr_touched)
+			gfs2_io_error_bh(sdp, bh);
+		brelse(bh);
+		return -EIO;
 	}
 
 	return 0;
@@ -404,7 +467,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen)
 	if (buffer_uptodate(first_bh))
 		goto out;
 	if (!buffer_locked(first_bh))
-		ll_rw_block(READ_META, 1, &first_bh);
+		ll_rw_block(READ_SYNC | (1 << BIO_RW_META), 1, &first_bh);
 
 	dblock++;
 	extlen--;
diff --git a/fs/gfs2/mount.c b/fs/gfs2/mount.c
deleted file mode 100644
index f7e8527a21e..00000000000
--- a/fs/gfs2/mount.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/buffer_head.h>
-#include <linux/gfs2_ondisk.h>
-#include <linux/parser.h>
-
-#include "gfs2.h"
-#include "incore.h"
-#include "super.h"
-#include "sys.h"
-#include "util.h"
-
-enum {
-	Opt_lockproto,
-	Opt_locktable,
-	Opt_hostdata,
-	Opt_spectator,
-	Opt_ignore_local_fs,
-	Opt_localflocks,
-	Opt_localcaching,
-	Opt_debug,
-	Opt_nodebug,
-	Opt_upgrade,
-	Opt_acl,
-	Opt_noacl,
-	Opt_quota_off,
-	Opt_quota_account,
-	Opt_quota_on,
-	Opt_quota,
-	Opt_noquota,
-	Opt_suiddir,
-	Opt_nosuiddir,
-	Opt_data_writeback,
-	Opt_data_ordered,
-	Opt_meta,
-	Opt_discard,
-	Opt_nodiscard,
-	Opt_err,
-};
-
-static const match_table_t tokens = {
-	{Opt_lockproto, "lockproto=%s"},
-	{Opt_locktable, "locktable=%s"},
-	{Opt_hostdata, "hostdata=%s"},
-	{Opt_spectator, "spectator"},
-	{Opt_ignore_local_fs, "ignore_local_fs"},
-	{Opt_localflocks, "localflocks"},
-	{Opt_localcaching, "localcaching"},
-	{Opt_debug, "debug"},
-	{Opt_nodebug, "nodebug"},
-	{Opt_upgrade, "upgrade"},
-	{Opt_acl, "acl"},
-	{Opt_noacl, "noacl"},
-	{Opt_quota_off, "quota=off"},
-	{Opt_quota_account, "quota=account"},
-	{Opt_quota_on, "quota=on"},
-	{Opt_quota, "quota"},
-	{Opt_noquota, "noquota"},
-	{Opt_suiddir, "suiddir"},
-	{Opt_nosuiddir, "nosuiddir"},
-	{Opt_data_writeback, "data=writeback"},
-	{Opt_data_ordered, "data=ordered"},
-	{Opt_meta, "meta"},
-	{Opt_discard, "discard"},
-	{Opt_nodiscard, "nodiscard"},
-	{Opt_err, NULL}
-};
-
-/**
- * gfs2_mount_args - Parse mount options
- * @sdp:
- * @data:
- *
- * Return: errno
- */
-
-int gfs2_mount_args(struct gfs2_sbd *sdp, struct gfs2_args *args, char *options)
-{
-	char *o;
-	int token;
-	substring_t tmp[MAX_OPT_ARGS];
-
-	/* Split the options into tokens with the "," character and
-	   process them */
-
-	while (1) {
-		o = strsep(&options, ",");
-		if (o == NULL)
-			break;
-		if (*o == '\0')
-			continue;
-
-		token = match_token(o, tokens, tmp);
-		switch (token) {
-		case Opt_lockproto:
-			match_strlcpy(args->ar_lockproto, &tmp[0],
-				      GFS2_LOCKNAME_LEN);
-			break;
-		case Opt_locktable:
-			match_strlcpy(args->ar_locktable, &tmp[0],
-				      GFS2_LOCKNAME_LEN);
-			break;
-		case Opt_hostdata:
-			match_strlcpy(args->ar_hostdata, &tmp[0],
-				      GFS2_LOCKNAME_LEN);
-			break;
-		case Opt_spectator:
-			args->ar_spectator = 1;
-			break;
-		case Opt_ignore_local_fs:
-			args->ar_ignore_local_fs = 1;
-			break;
-		case Opt_localflocks:
-			args->ar_localflocks = 1;
-			break;
-		case Opt_localcaching:
-			args->ar_localcaching = 1;
-			break;
-		case Opt_debug:
-			args->ar_debug = 1;
-			break;
-		case Opt_nodebug:
-			args->ar_debug = 0;
-			break;
-		case Opt_upgrade:
-			args->ar_upgrade = 1;
-			break;
-		case Opt_acl:
-			args->ar_posix_acl = 1;
-			break;
-		case Opt_noacl:
-			args->ar_posix_acl = 0;
-			break;
-		case Opt_quota_off:
-		case Opt_noquota:
-			args->ar_quota = GFS2_QUOTA_OFF;
-			break;
-		case Opt_quota_account:
-			args->ar_quota = GFS2_QUOTA_ACCOUNT;
-			break;
-		case Opt_quota_on:
-		case Opt_quota:
-			args->ar_quota = GFS2_QUOTA_ON;
-			break;
-		case Opt_suiddir:
-			args->ar_suiddir = 1;
-			break;
-		case Opt_nosuiddir:
-			args->ar_suiddir = 0;
-			break;
-		case Opt_data_writeback:
-			args->ar_data = GFS2_DATA_WRITEBACK;
-			break;
-		case Opt_data_ordered:
-			args->ar_data = GFS2_DATA_ORDERED;
-			break;
-		case Opt_meta:
-			args->ar_meta = 1;
-			break;
-		case Opt_discard:
-			args->ar_discard = 1;
-			break;
-		case Opt_nodiscard:
-			args->ar_discard = 0;
-			break;
-		case Opt_err:
-		default:
-			fs_info(sdp, "invalid mount option: %s\n", o);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
diff --git a/fs/gfs2/ops_address.h b/fs/gfs2/ops_address.h
deleted file mode 100644
index 5da21285bba..00000000000
--- a/fs/gfs2/ops_address.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#ifndef __OPS_ADDRESS_DOT_H__
-#define __OPS_ADDRESS_DOT_H__
-
-#include <linux/fs.h>
-#include <linux/buffer_head.h>
-#include <linux/mm.h>
-
-extern int gfs2_releasepage(struct page *page, gfp_t gfp_mask);
-extern int gfs2_internal_read(struct gfs2_inode *ip,
-			      struct file_ra_state *ra_state,
-			      char *buf, loff_t *pos, unsigned size);
-extern void gfs2_set_aops(struct inode *inode);
-
-#endif /* __OPS_ADDRESS_DOT_H__ */
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 1ff9473ea75..7bc3c45cd67 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -17,6 +17,7 @@
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/gfs2_ondisk.h>
+#include <linux/slow-work.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -32,6 +33,7 @@
 #include "log.h"
 #include "quota.h"
 #include "dir.h"
+#include "trace_gfs2.h"
 
 #define DO 0
 #define UNDO 1
@@ -55,8 +57,6 @@ static void gfs2_tune_init(struct gfs2_tune *gt)
 	spin_lock_init(&gt->gt_spin);
 
 	gt->gt_incore_log_blocks = 1024;
-	gt->gt_log_flush_secs = 60;
-	gt->gt_recoverd_secs = 60;
 	gt->gt_logd_secs = 1;
 	gt->gt_quota_simul_sync = 64;
 	gt->gt_quota_warn_period = 10;
@@ -526,11 +526,11 @@ static int init_sb(struct gfs2_sbd *sdp, int silent)
 	}
 
 	/* Set up the buffer cache and SB for real */
-	if (sdp->sd_sb.sb_bsize < bdev_hardsect_size(sb->s_bdev)) {
+	if (sdp->sd_sb.sb_bsize < bdev_logical_block_size(sb->s_bdev)) {
 		ret = -EINVAL;
 		fs_err(sdp, "FS block size (%u) is too small for device "
 		       "block size (%u)\n",
-		       sdp->sd_sb.sb_bsize, bdev_hardsect_size(sb->s_bdev));
+		       sdp->sd_sb.sb_bsize, bdev_logical_block_size(sb->s_bdev));
 		goto out;
 	}
 	if (sdp->sd_sb.sb_bsize > PAGE_SIZE) {
@@ -676,6 +676,7 @@ static int gfs2_jindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ji_gh)
 			break;
 
 		INIT_LIST_HEAD(&jd->extent_list);
+		slow_work_init(&jd->jd_work, &gfs2_recover_ops);
 		jd->jd_inode = gfs2_lookupi(sdp->sd_jindex, &name, 1);
 		if (!jd->jd_inode || IS_ERR(jd->jd_inode)) {
 			if (!jd->jd_inode)
@@ -701,14 +702,13 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
 {
 	struct inode *master = sdp->sd_master_dir->d_inode;
 	struct gfs2_holder ji_gh;
-	struct task_struct *p;
 	struct gfs2_inode *ip;
 	int jindex = 1;
 	int error = 0;
 
 	if (undo) {
 		jindex = 0;
-		goto fail_recoverd;
+		goto fail_jinode_gh;
 	}
 
 	sdp->sd_jindex = gfs2_lookup_simple(master, "jindex");
@@ -776,6 +776,7 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
 		/* Map the extents for this journal's blocks */
 		map_journal_extents(sdp);
 	}
+	trace_gfs2_log_blocks(sdp, atomic_read(&sdp->sd_log_blks_free));
 
 	if (sdp->sd_lockstruct.ls_first) {
 		unsigned int x;
@@ -801,18 +802,8 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
 	gfs2_glock_dq_uninit(&ji_gh);
 	jindex = 0;
 
-	p = kthread_run(gfs2_recoverd, sdp, "gfs2_recoverd");
-	error = IS_ERR(p);
-	if (error) {
-		fs_err(sdp, "can't start recoverd thread: %d\n", error);
-		goto fail_jinode_gh;
-	}
-	sdp->sd_recoverd_process = p;
-
 	return 0;
 
-fail_recoverd:
-	kthread_stop(sdp->sd_recoverd_process);
 fail_jinode_gh:
 	if (!sdp->sd_args.ar_spectator)
 		gfs2_glock_dq_uninit(&sdp->sd_jinode_gh);
@@ -1165,6 +1156,7 @@ static int fill_super(struct super_block *sb, void *data, int silent)
 
 	sdp->sd_args.ar_quota = GFS2_QUOTA_DEFAULT;
 	sdp->sd_args.ar_data = GFS2_DATA_DEFAULT;
+	sdp->sd_args.ar_commit = 60;
 
 	error = gfs2_mount_args(sdp, &sdp->sd_args, data);
 	if (error) {
@@ -1172,8 +1164,10 @@ static int fill_super(struct super_block *sb, void *data, int silent)
 		goto fail;
 	}
 
-	if (sdp->sd_args.ar_spectator)
+	if (sdp->sd_args.ar_spectator) {
                 sb->s_flags |= MS_RDONLY;
+		set_bit(SDF_NORECOVERY, &sdp->sd_flags);
+	}
 	if (sdp->sd_args.ar_posix_acl)
 		sb->s_flags |= MS_POSIXACL;
 
@@ -1191,6 +1185,8 @@ static int fill_super(struct super_block *sb, void *data, int silent)
                                GFS2_BASIC_BLOCK_SHIFT;
 	sdp->sd_fsb2bb = 1 << sdp->sd_fsb2bb_shift;
 
+	sdp->sd_tune.gt_log_flush_secs = sdp->sd_args.ar_commit;
+
 	error = init_names(sdp, silent);
 	if (error)
 		goto fail;
@@ -1279,9 +1275,22 @@ static int gfs2_get_sb(struct file_system_type *fs_type, int flags,
 	return get_sb_bdev(fs_type, flags, dev_name, data, fill_super, mnt);
 }
 
-static struct super_block *get_gfs2_sb(const char *dev_name)
+static int test_meta_super(struct super_block *s, void *ptr)
+{
+	struct block_device *bdev = ptr;
+	return (bdev == s->s_bdev);
+}
+
+static int set_meta_super(struct super_block *s, void *ptr)
 {
-	struct super_block *sb;
+	return -EINVAL;
+}
+
+static int gfs2_get_sb_meta(struct file_system_type *fs_type, int flags,
+			    const char *dev_name, void *data, struct vfsmount *mnt)
+{
+	struct super_block *s;
+	struct gfs2_sbd *sdp;
 	struct path path;
 	int error;
 
@@ -1289,30 +1298,17 @@ static struct super_block *get_gfs2_sb(const char *dev_name)
 	if (error) {
 		printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n",
 		       dev_name, error);
-		return NULL;
+		return error;
 	}
-	sb = path.dentry->d_inode->i_sb;
-	if (sb && (sb->s_type == &gfs2_fs_type))
-		atomic_inc(&sb->s_active);
-	else
-		sb = NULL;
+	s = sget(&gfs2_fs_type, test_meta_super, set_meta_super,
+		 path.dentry->d_inode->i_sb->s_bdev);
 	path_put(&path);
-	return sb;
-}
-
-static int gfs2_get_sb_meta(struct file_system_type *fs_type, int flags,
-			    const char *dev_name, void *data, struct vfsmount *mnt)
-{
-	struct super_block *sb = NULL;
-	struct gfs2_sbd *sdp;
-
-	sb = get_gfs2_sb(dev_name);
-	if (!sb) {
+	if (IS_ERR(s)) {
 		printk(KERN_WARNING "GFS2: gfs2 mount does not exist\n");
-		return -ENOENT;
+		return PTR_ERR(s);
 	}
-	sdp = sb->s_fs_info;
-	mnt->mnt_sb = sb;
+	sdp = s->s_fs_info;
+	mnt->mnt_sb = s;
 	mnt->mnt_root = dget(sdp->sd_master_dir);
 	return 0;
 }
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 1c70fa5168d..f8bd20baf99 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -262,6 +262,44 @@ out_parent:
 	return error;
 }
 
+/*
+ * gfs2_unlink_ok - check to see that a inode is still in a directory
+ * @dip: the directory
+ * @name: the name of the file
+ * @ip: the inode
+ *
+ * Assumes that the lock on (at least) @dip is held.
+ *
+ * Returns: 0 if the parent/child relationship is correct, errno if it isn't
+ */
+
+static int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
+			  const struct gfs2_inode *ip)
+{
+	int error;
+
+	if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
+		return -EPERM;
+
+	if ((dip->i_inode.i_mode & S_ISVTX) &&
+	    dip->i_inode.i_uid != current_fsuid() &&
+	    ip->i_inode.i_uid != current_fsuid() && !capable(CAP_FOWNER))
+		return -EPERM;
+
+	if (IS_APPEND(&dip->i_inode))
+		return -EPERM;
+
+	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC);
+	if (error)
+		return error;
+
+	error = gfs2_dir_check(&dip->i_inode, name, ip);
+	if (error)
+		return error;
+
+	return 0;
+}
+
 /**
  * gfs2_unlink - Unlink a file
  * @dir: The inode of the directory containing the file to unlink
@@ -473,6 +511,59 @@ static int gfs2_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 }
 
 /**
+ * gfs2_rmdiri - Remove a directory
+ * @dip: The parent directory of the directory to be removed
+ * @name: The name of the directory to be removed
+ * @ip: The GFS2 inode of the directory to be removed
+ *
+ * Assumes Glocks on dip and ip are held
+ *
+ * Returns: errno
+ */
+
+static int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
+		       struct gfs2_inode *ip)
+{
+	struct qstr dotname;
+	int error;
+
+	if (ip->i_entries != 2) {
+		if (gfs2_consist_inode(ip))
+			gfs2_dinode_print(ip);
+		return -EIO;
+	}
+
+	error = gfs2_dir_del(dip, name);
+	if (error)
+		return error;
+
+	error = gfs2_change_nlink(dip, -1);
+	if (error)
+		return error;
+
+	gfs2_str2qstr(&dotname, ".");
+	error = gfs2_dir_del(ip, &dotname);
+	if (error)
+		return error;
+
+	gfs2_str2qstr(&dotname, "..");
+	error = gfs2_dir_del(ip, &dotname);
+	if (error)
+		return error;
+
+	/* It looks odd, but it really should be done twice */
+	error = gfs2_change_nlink(ip, -1);
+	if (error)
+		return error;
+
+	error = gfs2_change_nlink(ip, -1);
+	if (error)
+		return error;
+
+	return error;
+}
+
+/**
  * gfs2_rmdir - Remove a directory
  * @dir: The parent directory of the directory to be removed
  * @dentry: The dentry of the directory to remove
@@ -885,6 +976,61 @@ out:
 }
 
 /**
+ * gfs2_readlinki - return the contents of a symlink
+ * @ip: the symlink's inode
+ * @buf: a pointer to the buffer to be filled
+ * @len: a pointer to the length of @buf
+ *
+ * If @buf is too small, a piece of memory is kmalloc()ed and needs
+ * to be freed by the caller.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_readlinki(struct gfs2_inode *ip, char **buf, unsigned int *len)
+{
+	struct gfs2_holder i_gh;
+	struct buffer_head *dibh;
+	unsigned int x;
+	int error;
+
+	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
+	error = gfs2_glock_nq(&i_gh);
+	if (error) {
+		gfs2_holder_uninit(&i_gh);
+		return error;
+	}
+
+	if (!ip->i_disksize) {
+		gfs2_consist_inode(ip);
+		error = -EIO;
+		goto out;
+	}
+
+	error = gfs2_meta_inode_buffer(ip, &dibh);
+	if (error)
+		goto out;
+
+	x = ip->i_disksize + 1;
+	if (x > *len) {
+		*buf = kmalloc(x, GFP_NOFS);
+		if (!*buf) {
+			error = -ENOMEM;
+			goto out_brelse;
+		}
+	}
+
+	memcpy(*buf, dibh->b_data + sizeof(struct gfs2_dinode), x);
+	*len = x;
+
+out_brelse:
+	brelse(dibh);
+out:
+	gfs2_glock_dq_uninit(&i_gh);
+	return error;
+}
+
+/**
  * gfs2_readlink - Read the value of a symlink
  * @dentry: the symlink
  * @buf: the buffer to read the symlink data into
diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c
deleted file mode 100644
index 458019569dc..00000000000
--- a/fs/gfs2/ops_super.c
+++ /dev/null
@@ -1,723 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2008 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/buffer_head.h>
-#include <linux/statfs.h>
-#include <linux/seq_file.h>
-#include <linux/mount.h>
-#include <linux/kthread.h>
-#include <linux/delay.h>
-#include <linux/gfs2_ondisk.h>
-#include <linux/crc32.h>
-#include <linux/time.h>
-
-#include "gfs2.h"
-#include "incore.h"
-#include "glock.h"
-#include "inode.h"
-#include "log.h"
-#include "quota.h"
-#include "recovery.h"
-#include "rgrp.h"
-#include "super.h"
-#include "sys.h"
-#include "util.h"
-#include "trans.h"
-#include "dir.h"
-#include "eattr.h"
-#include "bmap.h"
-#include "meta_io.h"
-
-#define args_neq(a1, a2, x) ((a1)->ar_##x != (a2)->ar_##x)
-
-/**
- * gfs2_write_inode - Make sure the inode is stable on the disk
- * @inode: The inode
- * @sync: synchronous write flag
- *
- * Returns: errno
- */
-
-static int gfs2_write_inode(struct inode *inode, int sync)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_sbd *sdp = GFS2_SB(inode);
-	struct gfs2_holder gh;
-	struct buffer_head *bh;
-	struct timespec atime;
-	struct gfs2_dinode *di;
-	int ret = 0;
-
-	/* Check this is a "normal" inode, etc */
-	if (!test_bit(GIF_USER, &ip->i_flags) ||
-	    (current->flags & PF_MEMALLOC))
-		return 0;
-	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
-	if (ret)
-		goto do_flush;
-	ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
-	if (ret)
-		goto do_unlock;
-	ret = gfs2_meta_inode_buffer(ip, &bh);
-	if (ret == 0) {
-		di = (struct gfs2_dinode *)bh->b_data;
-		atime.tv_sec = be64_to_cpu(di->di_atime);
-		atime.tv_nsec = be32_to_cpu(di->di_atime_nsec);
-		if (timespec_compare(&inode->i_atime, &atime) > 0) {
-			gfs2_trans_add_bh(ip->i_gl, bh, 1);
-			gfs2_dinode_out(ip, bh->b_data);
-		}
-		brelse(bh);
-	}
-	gfs2_trans_end(sdp);
-do_unlock:
-	gfs2_glock_dq_uninit(&gh);
-do_flush:
-	if (sync != 0)
-		gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
-	return ret;
-}
-
-/**
- * gfs2_make_fs_ro - Turn a Read-Write FS into a Read-Only one
- * @sdp: the filesystem
- *
- * Returns: errno
- */
-
-static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
-{
-	struct gfs2_holder t_gh;
-	int error;
-
-	gfs2_quota_sync(sdp);
-	gfs2_statfs_sync(sdp);
-
-	error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, GL_NOCACHE,
-				   &t_gh);
-	if (error && !test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
-		return error;
-
-	gfs2_meta_syncfs(sdp);
-	gfs2_log_shutdown(sdp);
-
-	clear_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
-
-	if (t_gh.gh_gl)
-		gfs2_glock_dq_uninit(&t_gh);
-
-	gfs2_quota_cleanup(sdp);
-
-	return error;
-}
-
-/**
- * gfs2_put_super - Unmount the filesystem
- * @sb: The VFS superblock
- *
- */
-
-static void gfs2_put_super(struct super_block *sb)
-{
-	struct gfs2_sbd *sdp = sb->s_fs_info;
-	int error;
-
-	/*  Unfreeze the filesystem, if we need to  */
-
-	mutex_lock(&sdp->sd_freeze_lock);
-	if (sdp->sd_freeze_count)
-		gfs2_glock_dq_uninit(&sdp->sd_freeze_gh);
-	mutex_unlock(&sdp->sd_freeze_lock);
-
-	kthread_stop(sdp->sd_quotad_process);
-	kthread_stop(sdp->sd_logd_process);
-	kthread_stop(sdp->sd_recoverd_process);
-
-	if (!(sb->s_flags & MS_RDONLY)) {
-		error = gfs2_make_fs_ro(sdp);
-		if (error)
-			gfs2_io_error(sdp);
-	}
-	/*  At this point, we're through modifying the disk  */
-
-	/*  Release stuff  */
-
-	iput(sdp->sd_jindex);
-	iput(sdp->sd_inum_inode);
-	iput(sdp->sd_statfs_inode);
-	iput(sdp->sd_rindex);
-	iput(sdp->sd_quota_inode);
-
-	gfs2_glock_put(sdp->sd_rename_gl);
-	gfs2_glock_put(sdp->sd_trans_gl);
-
-	if (!sdp->sd_args.ar_spectator) {
-		gfs2_glock_dq_uninit(&sdp->sd_journal_gh);
-		gfs2_glock_dq_uninit(&sdp->sd_jinode_gh);
-		gfs2_glock_dq_uninit(&sdp->sd_ir_gh);
-		gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
-		gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
-		iput(sdp->sd_ir_inode);
-		iput(sdp->sd_sc_inode);
-		iput(sdp->sd_qc_inode);
-	}
-
-	gfs2_glock_dq_uninit(&sdp->sd_live_gh);
-	gfs2_clear_rgrpd(sdp);
-	gfs2_jindex_free(sdp);
-	/*  Take apart glock structures and buffer lists  */
-	gfs2_gl_hash_clear(sdp);
-	/*  Unmount the locking protocol  */
-	gfs2_lm_unmount(sdp);
-
-	/*  At this point, we're through participating in the lockspace  */
-	gfs2_sys_fs_del(sdp);
-}
-
-/**
- * gfs2_write_super
- * @sb: the superblock
- *
- */
-
-static void gfs2_write_super(struct super_block *sb)
-{
-	sb->s_dirt = 0;
-}
-
-/**
- * gfs2_sync_fs - sync the filesystem
- * @sb: the superblock
- *
- * Flushes the log to disk.
- */
-
-static int gfs2_sync_fs(struct super_block *sb, int wait)
-{
-	sb->s_dirt = 0;
-	if (wait && sb->s_fs_info)
-		gfs2_log_flush(sb->s_fs_info, NULL);
-	return 0;
-}
-
-/**
- * gfs2_freeze - prevent further writes to the filesystem
- * @sb: the VFS structure for the filesystem
- *
- */
-
-static int gfs2_freeze(struct super_block *sb)
-{
-	struct gfs2_sbd *sdp = sb->s_fs_info;
-	int error;
-
-	if (test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
-		return -EINVAL;
-
-	for (;;) {
-		error = gfs2_freeze_fs(sdp);
-		if (!error)
-			break;
-
-		switch (error) {
-		case -EBUSY:
-			fs_err(sdp, "waiting for recovery before freeze\n");
-			break;
-
-		default:
-			fs_err(sdp, "error freezing FS: %d\n", error);
-			break;
-		}
-
-		fs_err(sdp, "retrying...\n");
-		msleep(1000);
-	}
-	return 0;
-}
-
-/**
- * gfs2_unfreeze - reallow writes to the filesystem
- * @sb: the VFS structure for the filesystem
- *
- */
-
-static int gfs2_unfreeze(struct super_block *sb)
-{
-	gfs2_unfreeze_fs(sb->s_fs_info);
-	return 0;
-}
-
-/**
- * statfs_fill - fill in the sg for a given RG
- * @rgd: the RG
- * @sc: the sc structure
- *
- * Returns: 0 on success, -ESTALE if the LVB is invalid
- */
-
-static int statfs_slow_fill(struct gfs2_rgrpd *rgd,
-			    struct gfs2_statfs_change_host *sc)
-{
-	gfs2_rgrp_verify(rgd);
-	sc->sc_total += rgd->rd_data;
-	sc->sc_free += rgd->rd_free;
-	sc->sc_dinodes += rgd->rd_dinodes;
-	return 0;
-}
-
-/**
- * gfs2_statfs_slow - Stat a filesystem using asynchronous locking
- * @sdp: the filesystem
- * @sc: the sc info that will be returned
- *
- * Any error (other than a signal) will cause this routine to fall back
- * to the synchronous version.
- *
- * FIXME: This really shouldn't busy wait like this.
- *
- * Returns: errno
- */
-
-static int gfs2_statfs_slow(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
-{
-	struct gfs2_holder ri_gh;
-	struct gfs2_rgrpd *rgd_next;
-	struct gfs2_holder *gha, *gh;
-	unsigned int slots = 64;
-	unsigned int x;
-	int done;
-	int error = 0, err;
-
-	memset(sc, 0, sizeof(struct gfs2_statfs_change_host));
-	gha = kcalloc(slots, sizeof(struct gfs2_holder), GFP_KERNEL);
-	if (!gha)
-		return -ENOMEM;
-
-	error = gfs2_rindex_hold(sdp, &ri_gh);
-	if (error)
-		goto out;
-
-	rgd_next = gfs2_rgrpd_get_first(sdp);
-
-	for (;;) {
-		done = 1;
-
-		for (x = 0; x < slots; x++) {
-			gh = gha + x;
-
-			if (gh->gh_gl && gfs2_glock_poll(gh)) {
-				err = gfs2_glock_wait(gh);
-				if (err) {
-					gfs2_holder_uninit(gh);
-					error = err;
-				} else {
-					if (!error)
-						error = statfs_slow_fill(
-							gh->gh_gl->gl_object, sc);
-					gfs2_glock_dq_uninit(gh);
-				}
-			}
-
-			if (gh->gh_gl)
-				done = 0;
-			else if (rgd_next && !error) {
-				error = gfs2_glock_nq_init(rgd_next->rd_gl,
-							   LM_ST_SHARED,
-							   GL_ASYNC,
-							   gh);
-				rgd_next = gfs2_rgrpd_get_next(rgd_next);
-				done = 0;
-			}
-
-			if (signal_pending(current))
-				error = -ERESTARTSYS;
-		}
-
-		if (done)
-			break;
-
-		yield();
-	}
-
-	gfs2_glock_dq_uninit(&ri_gh);
-
-out:
-	kfree(gha);
-	return error;
-}
-
-/**
- * gfs2_statfs_i - Do a statfs
- * @sdp: the filesystem
- * @sg: the sg structure
- *
- * Returns: errno
- */
-
-static int gfs2_statfs_i(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
-{
-	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
-	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
-
-	spin_lock(&sdp->sd_statfs_spin);
-
-	*sc = *m_sc;
-	sc->sc_total += l_sc->sc_total;
-	sc->sc_free += l_sc->sc_free;
-	sc->sc_dinodes += l_sc->sc_dinodes;
-
-	spin_unlock(&sdp->sd_statfs_spin);
-
-	if (sc->sc_free < 0)
-		sc->sc_free = 0;
-	if (sc->sc_free > sc->sc_total)
-		sc->sc_free = sc->sc_total;
-	if (sc->sc_dinodes < 0)
-		sc->sc_dinodes = 0;
-
-	return 0;
-}
-
-/**
- * gfs2_statfs - Gather and return stats about the filesystem
- * @sb: The superblock
- * @statfsbuf: The buffer
- *
- * Returns: 0 on success or error code
- */
-
-static int gfs2_statfs(struct dentry *dentry, struct kstatfs *buf)
-{
-	struct super_block *sb = dentry->d_inode->i_sb;
-	struct gfs2_sbd *sdp = sb->s_fs_info;
-	struct gfs2_statfs_change_host sc;
-	int error;
-
-	if (gfs2_tune_get(sdp, gt_statfs_slow))
-		error = gfs2_statfs_slow(sdp, &sc);
-	else
-		error = gfs2_statfs_i(sdp, &sc);
-
-	if (error)
-		return error;
-
-	buf->f_type = GFS2_MAGIC;
-	buf->f_bsize = sdp->sd_sb.sb_bsize;
-	buf->f_blocks = sc.sc_total;
-	buf->f_bfree = sc.sc_free;
-	buf->f_bavail = sc.sc_free;
-	buf->f_files = sc.sc_dinodes + sc.sc_free;
-	buf->f_ffree = sc.sc_free;
-	buf->f_namelen = GFS2_FNAMESIZE;
-
-	return 0;
-}
-
-/**
- * gfs2_remount_fs - called when the FS is remounted
- * @sb:  the filesystem
- * @flags:  the remount flags
- * @data:  extra data passed in (not used right now)
- *
- * Returns: errno
- */
-
-static int gfs2_remount_fs(struct super_block *sb, int *flags, char *data)
-{
-	struct gfs2_sbd *sdp = sb->s_fs_info;
-	struct gfs2_args args = sdp->sd_args; /* Default to current settings */
-	int error;
-
-	error = gfs2_mount_args(sdp, &args, data);
-	if (error)
-		return error;
-
-	/* Not allowed to change locking details */
-	if (strcmp(args.ar_lockproto, sdp->sd_args.ar_lockproto) ||
-	    strcmp(args.ar_locktable, sdp->sd_args.ar_locktable) ||
-	    strcmp(args.ar_hostdata, sdp->sd_args.ar_hostdata))
-		return -EINVAL;
-
-	/* Some flags must not be changed */
-	if (args_neq(&args, &sdp->sd_args, spectator) ||
-	    args_neq(&args, &sdp->sd_args, ignore_local_fs) ||
-	    args_neq(&args, &sdp->sd_args, localflocks) ||
-	    args_neq(&args, &sdp->sd_args, localcaching) ||
-	    args_neq(&args, &sdp->sd_args, meta))
-		return -EINVAL;
-
-	if (sdp->sd_args.ar_spectator)
-		*flags |= MS_RDONLY;
-
-	if ((sb->s_flags ^ *flags) & MS_RDONLY) {
-		if (*flags & MS_RDONLY)
-			error = gfs2_make_fs_ro(sdp);
-		else
-			error = gfs2_make_fs_rw(sdp);
-		if (error)
-			return error;
-	}
-
-	sdp->sd_args = args;
-	if (sdp->sd_args.ar_posix_acl)
-		sb->s_flags |= MS_POSIXACL;
-	else
-		sb->s_flags &= ~MS_POSIXACL;
-	return 0;
-}
-
-/**
- * gfs2_drop_inode - Drop an inode (test for remote unlink)
- * @inode: The inode to drop
- *
- * If we've received a callback on an iopen lock then its because a
- * remote node tried to deallocate the inode but failed due to this node
- * still having the inode open. Here we mark the link count zero
- * since we know that it must have reached zero if the GLF_DEMOTE flag
- * is set on the iopen glock. If we didn't do a disk read since the
- * remote node removed the final link then we might otherwise miss
- * this event. This check ensures that this node will deallocate the
- * inode's blocks, or alternatively pass the baton on to another
- * node for later deallocation.
- */
-
-static void gfs2_drop_inode(struct inode *inode)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-
-	if (test_bit(GIF_USER, &ip->i_flags) && inode->i_nlink) {
-		struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
-		if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
-			clear_nlink(inode);
-	}
-	generic_drop_inode(inode);
-}
-
-/**
- * gfs2_clear_inode - Deallocate an inode when VFS is done with it
- * @inode: The VFS inode
- *
- */
-
-static void gfs2_clear_inode(struct inode *inode)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-
-	/* This tells us its a "real" inode and not one which only
-	 * serves to contain an address space (see rgrp.c, meta_io.c)
-	 * which therefore doesn't have its own glocks.
-	 */
-	if (test_bit(GIF_USER, &ip->i_flags)) {
-		ip->i_gl->gl_object = NULL;
-		gfs2_glock_put(ip->i_gl);
-		ip->i_gl = NULL;
-		if (ip->i_iopen_gh.gh_gl) {
-			ip->i_iopen_gh.gh_gl->gl_object = NULL;
-			gfs2_glock_dq_uninit(&ip->i_iopen_gh);
-		}
-	}
-}
-
-static int is_ancestor(const struct dentry *d1, const struct dentry *d2)
-{
-	do {
-		if (d1 == d2)
-			return 1;
-		d1 = d1->d_parent;
-	} while (!IS_ROOT(d1));
-	return 0;
-}
-
-/**
- * gfs2_show_options - Show mount options for /proc/mounts
- * @s: seq_file structure
- * @mnt: vfsmount
- *
- * Returns: 0 on success or error code
- */
-
-static int gfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
-{
-	struct gfs2_sbd *sdp = mnt->mnt_sb->s_fs_info;
-	struct gfs2_args *args = &sdp->sd_args;
-
-	if (is_ancestor(mnt->mnt_root, sdp->sd_master_dir))
-		seq_printf(s, ",meta");
-	if (args->ar_lockproto[0])
-		seq_printf(s, ",lockproto=%s", args->ar_lockproto);
-	if (args->ar_locktable[0])
-		seq_printf(s, ",locktable=%s", args->ar_locktable);
-	if (args->ar_hostdata[0])
-		seq_printf(s, ",hostdata=%s", args->ar_hostdata);
-	if (args->ar_spectator)
-		seq_printf(s, ",spectator");
-	if (args->ar_ignore_local_fs)
-		seq_printf(s, ",ignore_local_fs");
-	if (args->ar_localflocks)
-		seq_printf(s, ",localflocks");
-	if (args->ar_localcaching)
-		seq_printf(s, ",localcaching");
-	if (args->ar_debug)
-		seq_printf(s, ",debug");
-	if (args->ar_upgrade)
-		seq_printf(s, ",upgrade");
-	if (args->ar_posix_acl)
-		seq_printf(s, ",acl");
-	if (args->ar_quota != GFS2_QUOTA_DEFAULT) {
-		char *state;
-		switch (args->ar_quota) {
-		case GFS2_QUOTA_OFF:
-			state = "off";
-			break;
-		case GFS2_QUOTA_ACCOUNT:
-			state = "account";
-			break;
-		case GFS2_QUOTA_ON:
-			state = "on";
-			break;
-		default:
-			state = "unknown";
-			break;
-		}
-		seq_printf(s, ",quota=%s", state);
-	}
-	if (args->ar_suiddir)
-		seq_printf(s, ",suiddir");
-	if (args->ar_data != GFS2_DATA_DEFAULT) {
-		char *state;
-		switch (args->ar_data) {
-		case GFS2_DATA_WRITEBACK:
-			state = "writeback";
-			break;
-		case GFS2_DATA_ORDERED:
-			state = "ordered";
-			break;
-		default:
-			state = "unknown";
-			break;
-		}
-		seq_printf(s, ",data=%s", state);
-	}
-	if (args->ar_discard)
-		seq_printf(s, ",discard");
-
-	return 0;
-}
-
-/*
- * We have to (at the moment) hold the inodes main lock to cover
- * the gap between unlocking the shared lock on the iopen lock and
- * taking the exclusive lock. I'd rather do a shared -> exclusive
- * conversion on the iopen lock, but we can change that later. This
- * is safe, just less efficient.
- */
-
-static void gfs2_delete_inode(struct inode *inode)
-{
-	struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int error;
-
-	if (!test_bit(GIF_USER, &ip->i_flags))
-		goto out;
-
-	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
-	if (unlikely(error)) {
-		gfs2_glock_dq_uninit(&ip->i_iopen_gh);
-		goto out;
-	}
-
-	gfs2_glock_dq_wait(&ip->i_iopen_gh);
-	gfs2_holder_reinit(LM_ST_EXCLUSIVE, LM_FLAG_TRY_1CB | GL_NOCACHE, &ip->i_iopen_gh);
-	error = gfs2_glock_nq(&ip->i_iopen_gh);
-	if (error)
-		goto out_truncate;
-
-	if (S_ISDIR(inode->i_mode) &&
-	    (ip->i_diskflags & GFS2_DIF_EXHASH)) {
-		error = gfs2_dir_exhash_dealloc(ip);
-		if (error)
-			goto out_unlock;
-	}
-
-	if (ip->i_eattr) {
-		error = gfs2_ea_dealloc(ip);
-		if (error)
-			goto out_unlock;
-	}
-
-	if (!gfs2_is_stuffed(ip)) {
-		error = gfs2_file_dealloc(ip);
-		if (error)
-			goto out_unlock;
-	}
-
-	error = gfs2_dinode_dealloc(ip);
-	if (error)
-		goto out_unlock;
-
-out_truncate:
-	error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
-	if (error)
-		goto out_unlock;
-	/* Needs to be done before glock release & also in a transaction */
-	truncate_inode_pages(&inode->i_data, 0);
-	gfs2_trans_end(sdp);
-
-out_unlock:
-	if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags))
-		gfs2_glock_dq(&ip->i_iopen_gh);
-	gfs2_holder_uninit(&ip->i_iopen_gh);
-	gfs2_glock_dq_uninit(&gh);
-	if (error && error != GLR_TRYFAILED)
-		fs_warn(sdp, "gfs2_delete_inode: %d\n", error);
-out:
-	truncate_inode_pages(&inode->i_data, 0);
-	clear_inode(inode);
-}
-
-static struct inode *gfs2_alloc_inode(struct super_block *sb)
-{
-	struct gfs2_inode *ip;
-
-	ip = kmem_cache_alloc(gfs2_inode_cachep, GFP_KERNEL);
-	if (ip) {
-		ip->i_flags = 0;
-		ip->i_gl = NULL;
-	}
-	return &ip->i_inode;
-}
-
-static void gfs2_destroy_inode(struct inode *inode)
-{
-	kmem_cache_free(gfs2_inode_cachep, inode);
-}
-
-const struct super_operations gfs2_super_ops = {
-	.alloc_inode		= gfs2_alloc_inode,
-	.destroy_inode		= gfs2_destroy_inode,
-	.write_inode		= gfs2_write_inode,
-	.delete_inode		= gfs2_delete_inode,
-	.put_super		= gfs2_put_super,
-	.write_super		= gfs2_write_super,
-	.sync_fs		= gfs2_sync_fs,
-	.freeze_fs 		= gfs2_freeze,
-	.unfreeze_fs		= gfs2_unfreeze,
-	.statfs			= gfs2_statfs,
-	.remount_fs		= gfs2_remount_fs,
-	.clear_inode		= gfs2_clear_inode,
-	.drop_inode		= gfs2_drop_inode,
-	.show_options		= gfs2_show_options,
-};
-
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 152e6c4a0dc..2e9b9326bfc 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -60,7 +60,6 @@
 #include "super.h"
 #include "trans.h"
 #include "inode.h"
-#include "ops_address.h"
 #include "util.h"
 
 #define QUOTA_USER 1
diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c
index 247e8f7d6b3..59d2695509d 100644
--- a/fs/gfs2/recovery.c
+++ b/fs/gfs2/recovery.c
@@ -13,8 +13,7 @@
 #include <linux/buffer_head.h>
 #include <linux/gfs2_ondisk.h>
 #include <linux/crc32.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
+#include <linux/slow-work.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -441,18 +440,25 @@ static void gfs2_recovery_done(struct gfs2_sbd *sdp, unsigned int jid,
         kobject_uevent_env(&sdp->sd_kobj, KOBJ_CHANGE, envp);
 }
 
-/**
- * gfs2_recover_journal - recover a given journal
- * @jd: the struct gfs2_jdesc describing the journal
- *
- * Acquire the journal's lock, check to see if the journal is clean, and
- * do recovery if necessary.
- *
- * Returns: errno
- */
+static int gfs2_recover_get_ref(struct slow_work *work)
+{
+	struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
+	if (test_and_set_bit(JDF_RECOVERY, &jd->jd_flags))
+		return -EBUSY;
+	return 0;
+}
 
-int gfs2_recover_journal(struct gfs2_jdesc *jd)
+static void gfs2_recover_put_ref(struct slow_work *work)
+{
+	struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
+	clear_bit(JDF_RECOVERY, &jd->jd_flags);
+	smp_mb__after_clear_bit();
+	wake_up_bit(&jd->jd_flags, JDF_RECOVERY);
+}
+
+static void gfs2_recover_work(struct slow_work *work)
 {
+	struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
 	struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
 	struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
 	struct gfs2_log_header_host head;
@@ -569,7 +575,7 @@ int gfs2_recover_journal(struct gfs2_jdesc *jd)
 		gfs2_glock_dq_uninit(&j_gh);
 
 	fs_info(sdp, "jid=%u: Done\n", jd->jd_jid);
-	return 0;
+	return;
 
 fail_gunlock_tr:
 	gfs2_glock_dq_uninit(&t_gh);
@@ -584,70 +590,28 @@ fail_gunlock_j:
 
 fail:
 	gfs2_recovery_done(sdp, jd->jd_jid, LM_RD_GAVEUP);
-	return error;
 }
 
-static struct gfs2_jdesc *gfs2_jdesc_find_dirty(struct gfs2_sbd *sdp)
-{
-	struct gfs2_jdesc *jd;
-	int found = 0;
-
-	spin_lock(&sdp->sd_jindex_spin);
+struct slow_work_ops gfs2_recover_ops = {
+	.get_ref = gfs2_recover_get_ref,
+	.put_ref = gfs2_recover_put_ref,
+	.execute = gfs2_recover_work,
+};
 
-	list_for_each_entry(jd, &sdp->sd_jindex_list, jd_list) {
-		if (jd->jd_dirty) {
-			jd->jd_dirty = 0;
-			found = 1;
-			break;
-		}
-	}
-	spin_unlock(&sdp->sd_jindex_spin);
-
-	if (!found)
-		jd = NULL;
 
-	return jd;
-}
-
-/**
- * gfs2_check_journals - Recover any dirty journals
- * @sdp: the filesystem
- *
- */
-
-static void gfs2_check_journals(struct gfs2_sbd *sdp)
+static int gfs2_recovery_wait(void *word)
 {
-	struct gfs2_jdesc *jd;
-
-	for (;;) {
-		jd = gfs2_jdesc_find_dirty(sdp);
-		if (!jd)
-			break;
-
-		if (jd != sdp->sd_jdesc)
-			gfs2_recover_journal(jd);
-	}
+	schedule();
+	return 0;
 }
 
-/**
- * gfs2_recoverd - Recover dead machine's journals
- * @sdp: Pointer to GFS2 superblock
- *
- */
-
-int gfs2_recoverd(void *data)
+int gfs2_recover_journal(struct gfs2_jdesc *jd)
 {
-	struct gfs2_sbd *sdp = data;
-	unsigned long t;
-
-	while (!kthread_should_stop()) {
-		gfs2_check_journals(sdp);
-		t = gfs2_tune_get(sdp,  gt_recoverd_secs) * HZ;
-		if (freezing(current))
-			refrigerator();
-		schedule_timeout_interruptible(t);
-	}
-
+	int rv;
+	rv = slow_work_enqueue(&jd->jd_work);
+	if (rv)
+		return rv;
+	wait_on_bit(&jd->jd_flags, JDF_RECOVERY, gfs2_recovery_wait, TASK_UNINTERRUPTIBLE);
 	return 0;
 }
 
diff --git a/fs/gfs2/recovery.h b/fs/gfs2/recovery.h
index a8218ea15b5..1616ac22569 100644
--- a/fs/gfs2/recovery.h
+++ b/fs/gfs2/recovery.h
@@ -28,7 +28,7 @@ extern void gfs2_revoke_clean(struct gfs2_sbd *sdp);
 extern int gfs2_find_jhead(struct gfs2_jdesc *jd,
 		    struct gfs2_log_header_host *head);
 extern int gfs2_recover_journal(struct gfs2_jdesc *gfs2_jd);
-extern int gfs2_recoverd(void *data);
+extern struct slow_work_ops gfs2_recover_ops;
 
 #endif /* __RECOVERY_DOT_H__ */
 
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 565038243fa..daa4ae341a2 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -29,7 +29,7 @@
 #include "util.h"
 #include "log.h"
 #include "inode.h"
-#include "ops_address.h"
+#include "trace_gfs2.h"
 
 #define BFITNOENT ((u32)~0)
 #define NO_BLOCK ((u64)~0)
@@ -442,6 +442,7 @@ static int compute_bitstructs(struct gfs2_rgrpd *rgd)
 	for (x = 0; x < length; x++) {
 		bi = rgd->rd_bits + x;
 
+		bi->bi_flags = 0;
 		/* small rgrp; bitmap stored completely in header block */
 		if (length == 1) {
 			bytes = bytes_left;
@@ -580,7 +581,6 @@ static int read_rindex_entry(struct gfs2_inode *ip,
 
 	rgd->rd_gl->gl_object = rgd;
 	rgd->rd_flags &= ~GFS2_RDF_UPTODATE;
-	rgd->rd_flags |= GFS2_RDF_CHECK;
 	return error;
 }
 
@@ -701,10 +701,9 @@ static void gfs2_rgrp_in(struct gfs2_rgrpd *rgd, const void *buf)
 	u32 rg_flags;
 
 	rg_flags = be32_to_cpu(str->rg_flags);
-	if (rg_flags & GFS2_RGF_NOALLOC)
-		rgd->rd_flags |= GFS2_RDF_NOALLOC;
-	else
-		rgd->rd_flags &= ~GFS2_RDF_NOALLOC;
+	rg_flags &= ~GFS2_RDF_MASK;
+	rgd->rd_flags &= GFS2_RDF_MASK;
+	rgd->rd_flags |= rg_flags;
 	rgd->rd_free = be32_to_cpu(str->rg_free);
 	rgd->rd_dinodes = be32_to_cpu(str->rg_dinodes);
 	rgd->rd_igeneration = be64_to_cpu(str->rg_igeneration);
@@ -713,11 +712,8 @@ static void gfs2_rgrp_in(struct gfs2_rgrpd *rgd, const void *buf)
 static void gfs2_rgrp_out(struct gfs2_rgrpd *rgd, void *buf)
 {
 	struct gfs2_rgrp *str = buf;
-	u32 rg_flags = 0;
 
-	if (rgd->rd_flags & GFS2_RDF_NOALLOC)
-		rg_flags |= GFS2_RGF_NOALLOC;
-	str->rg_flags = cpu_to_be32(rg_flags);
+	str->rg_flags = cpu_to_be32(rgd->rd_flags & ~GFS2_RDF_MASK);
 	str->rg_free = cpu_to_be32(rgd->rd_free);
 	str->rg_dinodes = cpu_to_be32(rgd->rd_dinodes);
 	str->__pad = cpu_to_be32(0);
@@ -775,8 +771,10 @@ int gfs2_rgrp_bh_get(struct gfs2_rgrpd *rgd)
 	}
 
 	if (!(rgd->rd_flags & GFS2_RDF_UPTODATE)) {
+		for (x = 0; x < length; x++)
+			clear_bit(GBF_FULL, &rgd->rd_bits[x].bi_flags);
 		gfs2_rgrp_in(rgd, (rgd->rd_bits[0].bi_bh)->b_data);
-		rgd->rd_flags |= GFS2_RDF_UPTODATE;
+		rgd->rd_flags |= (GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
 	}
 
 	spin_lock(&sdp->sd_rindex_spin);
@@ -845,7 +843,7 @@ static void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
 	struct super_block *sb = sdp->sd_vfs;
 	struct block_device *bdev = sb->s_bdev;
 	const unsigned int sects_per_blk = sdp->sd_sb.sb_bsize /
-					   bdev_hardsect_size(sb->s_bdev);
+					   bdev_logical_block_size(sb->s_bdev);
 	u64 blk;
 	sector_t start = 0;
 	sector_t nr_sects = 0;
@@ -903,6 +901,7 @@ void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd)
 			continue;
 		if (sdp->sd_args.ar_discard)
 			gfs2_rgrp_send_discards(sdp, rgd->rd_data0, bi);
+		clear_bit(GBF_FULL, &bi->bi_flags);
 		memcpy(bi->bi_clone + bi->bi_offset,
 		       bi->bi_bh->b_data + bi->bi_offset, bi->bi_len);
 	}
@@ -942,7 +941,7 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
 	struct gfs2_sbd *sdp = rgd->rd_sbd;
 	int ret = 0;
 
-	if (rgd->rd_flags & GFS2_RDF_NOALLOC)
+	if (rgd->rd_flags & (GFS2_RGF_NOALLOC | GFS2_RDF_ERROR))
 		return 0;
 
 	spin_lock(&sdp->sd_rindex_spin);
@@ -1315,30 +1314,37 @@ static u32 rgblk_search(struct gfs2_rgrpd *rgd, u32 goal,
 {
 	struct gfs2_bitmap *bi = NULL;
 	const u32 length = rgd->rd_length;
-	u32 blk = 0;
+	u32 blk = BFITNOENT;
 	unsigned int buf, x;
 	const unsigned int elen = *n;
-	const u8 *buffer;
+	const u8 *buffer = NULL;
 
 	*n = 0;
 	/* Find bitmap block that contains bits for goal block */
 	for (buf = 0; buf < length; buf++) {
 		bi = rgd->rd_bits + buf;
-		if (goal < (bi->bi_start + bi->bi_len) * GFS2_NBBY)
-			break;
+		/* Convert scope of "goal" from rgrp-wide to within found bit block */
+		if (goal < (bi->bi_start + bi->bi_len) * GFS2_NBBY) {
+			goal -= bi->bi_start * GFS2_NBBY;
+			goto do_search;
+		}
 	}
+	buf = 0;
+	goal = 0;
 
-	gfs2_assert(rgd->rd_sbd, buf < length);
-
-	/* Convert scope of "goal" from rgrp-wide to within found bit block */
-	goal -= bi->bi_start * GFS2_NBBY;
-
+do_search:
 	/* Search (up to entire) bitmap in this rgrp for allocatable block.
 	   "x <= length", instead of "x < length", because we typically start
 	   the search in the middle of a bit block, but if we can't find an
 	   allocatable block anywhere else, we want to be able wrap around and
 	   search in the first part of our first-searched bit block.  */
 	for (x = 0; x <= length; x++) {
+		bi = rgd->rd_bits + buf;
+
+		if (test_bit(GBF_FULL, &bi->bi_flags) &&
+		    (old_state == GFS2_BLKST_FREE))
+			goto skip;
+
 		/* The GFS2_BLKST_UNLINKED state doesn't apply to the clone
 		   bitmaps, so we must search the originals for that. */
 		buffer = bi->bi_bh->b_data + bi->bi_offset;
@@ -1349,33 +1355,39 @@ static u32 rgblk_search(struct gfs2_rgrpd *rgd, u32 goal,
 		if (blk != BFITNOENT)
 			break;
 
+		if ((goal == 0) && (old_state == GFS2_BLKST_FREE))
+			set_bit(GBF_FULL, &bi->bi_flags);
+
 		/* Try next bitmap block (wrap back to rgrp header if at end) */
-		buf = (buf + 1) % length;
-		bi = rgd->rd_bits + buf;
+skip:
+		buf++;
+		buf %= length;
 		goal = 0;
 	}
 
-	if (blk != BFITNOENT && old_state != new_state) {
-		*n = 1;
-		gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
+	if (blk == BFITNOENT)
+		return blk;
+	*n = 1;
+	if (old_state == new_state)
+		goto out;
+
+	gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
+	gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone, bi->bi_offset,
+		    bi->bi_len, blk, new_state);
+	goal = blk;
+	while (*n < elen) {
+		goal++;
+		if (goal >= (bi->bi_len * GFS2_NBBY))
+			break;
+		if (gfs2_testbit(rgd, buffer, bi->bi_len, goal) !=
+		    GFS2_BLKST_FREE)
+			break;
 		gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone, bi->bi_offset,
-			    bi->bi_len, blk, new_state);
-		goal = blk;
-		while (*n < elen) {
-			goal++;
-			if (goal >= (bi->bi_len * GFS2_NBBY))
-				break;
-			if (gfs2_testbit(rgd, buffer, bi->bi_len, goal) !=
-			    GFS2_BLKST_FREE)
-				break;
-			gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone,
-				    bi->bi_offset, bi->bi_len, goal,
-				    new_state);
-			(*n)++;
-		}
+			    bi->bi_len, goal, new_state);
+		(*n)++;
 	}
-
-	return (blk == BFITNOENT) ? blk : (bi->bi_start * GFS2_NBBY) + blk;
+out:
+	return (bi->bi_start * GFS2_NBBY) + blk;
 }
 
 /**
@@ -1435,13 +1447,33 @@ static struct gfs2_rgrpd *rgblk_free(struct gfs2_sbd *sdp, u64 bstart,
 }
 
 /**
- * gfs2_alloc_block - Allocate a block
+ * gfs2_rgrp_dump - print out an rgrp
+ * @seq: The iterator
+ * @gl: The glock in question
+ *
+ */
+
+int gfs2_rgrp_dump(struct seq_file *seq, const struct gfs2_glock *gl)
+{
+	const struct gfs2_rgrpd *rgd = gl->gl_object;
+	if (rgd == NULL)
+		return 0;
+	gfs2_print_dbg(seq, " R: n:%llu f:%02x b:%u/%u i:%u\n",
+		       (unsigned long long)rgd->rd_addr, rgd->rd_flags,
+		       rgd->rd_free, rgd->rd_free_clone, rgd->rd_dinodes);
+	return 0;
+}
+
+/**
+ * gfs2_alloc_block - Allocate one or more blocks
  * @ip: the inode to allocate the block for
+ * @bn: Used to return the starting block number
+ * @n: requested number of blocks/extent length (value/result)
  *
- * Returns: the allocated block
+ * Returns: 0 or error
  */
 
-u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
+int gfs2_alloc_block(struct gfs2_inode *ip, u64 *bn, unsigned int *n)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct buffer_head *dibh;
@@ -1457,7 +1489,10 @@ u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
 		goal = rgd->rd_last_alloc;
 
 	blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, GFS2_BLKST_USED, n);
-	BUG_ON(blk == BFITNOENT);
+
+	/* Since all blocks are reserved in advance, this shouldn't happen */
+	if (blk == BFITNOENT)
+		goto rgrp_error;
 
 	rgd->rd_last_alloc = blk;
 	block = rgd->rd_data0 + blk;
@@ -1469,7 +1504,9 @@ u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
 		di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal);
 		brelse(dibh);
 	}
-	gfs2_assert_withdraw(sdp, rgd->rd_free >= *n);
+	if (rgd->rd_free < *n)
+		goto rgrp_error;
+
 	rgd->rd_free -= *n;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1483,8 +1520,17 @@ u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
 	spin_lock(&sdp->sd_rindex_spin);
 	rgd->rd_free_clone -= *n;
 	spin_unlock(&sdp->sd_rindex_spin);
+	trace_gfs2_block_alloc(ip, block, *n, GFS2_BLKST_USED);
+	*bn = block;
+	return 0;
 
-	return block;
+rgrp_error:
+	fs_warn(sdp, "rgrp %llu has an error, marking it readonly until umount\n",
+	        (unsigned long long)rgd->rd_addr);
+	fs_warn(sdp, "umount on all nodes and run fsck.gfs2 to fix the error\n");
+	gfs2_rgrp_dump(NULL, rgd->rd_gl);
+	rgd->rd_flags |= GFS2_RDF_ERROR;
+	return -EIO;
 }
 
 /**
@@ -1526,7 +1572,7 @@ u64 gfs2_alloc_di(struct gfs2_inode *dip, u64 *generation)
 	spin_lock(&sdp->sd_rindex_spin);
 	rgd->rd_free_clone--;
 	spin_unlock(&sdp->sd_rindex_spin);
-
+	trace_gfs2_block_alloc(dip, block, 1, GFS2_BLKST_DINODE);
 	return block;
 }
 
@@ -1546,7 +1592,7 @@ void gfs2_free_data(struct gfs2_inode *ip, u64 bstart, u32 blen)
 	rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
 	if (!rgd)
 		return;
-
+	trace_gfs2_block_alloc(ip, bstart, blen, GFS2_BLKST_FREE);
 	rgd->rd_free += blen;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1574,7 +1620,7 @@ void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen)
 	rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
 	if (!rgd)
 		return;
-
+	trace_gfs2_block_alloc(ip, bstart, blen, GFS2_BLKST_FREE);
 	rgd->rd_free += blen;
 
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
@@ -1597,6 +1643,7 @@ void gfs2_unlink_di(struct inode *inode)
 	rgd = rgblk_free(sdp, blkno, 1, GFS2_BLKST_UNLINKED);
 	if (!rgd)
 		return;
+	trace_gfs2_block_alloc(ip, blkno, 1, GFS2_BLKST_UNLINKED);
 	gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
 	gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
 	gfs2_trans_add_rg(rgd);
@@ -1628,6 +1675,7 @@ static void gfs2_free_uninit_di(struct gfs2_rgrpd *rgd, u64 blkno)
 void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip)
 {
 	gfs2_free_uninit_di(rgd, ip->i_no_addr);
+	trace_gfs2_block_alloc(ip, ip->i_no_addr, 1, GFS2_BLKST_FREE);
 	gfs2_quota_change(ip, -1, ip->i_inode.i_uid, ip->i_inode.i_gid);
 	gfs2_meta_wipe(ip, ip->i_no_addr, 1);
 }
diff --git a/fs/gfs2/rgrp.h b/fs/gfs2/rgrp.h
index 3181c7e624b..1e76ff0f3e0 100644
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -14,22 +14,22 @@ struct gfs2_rgrpd;
 struct gfs2_sbd;
 struct gfs2_holder;
 
-void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd);
+extern void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd);
 
 struct gfs2_rgrpd *gfs2_blk2rgrpd(struct gfs2_sbd *sdp, u64 blk);
 struct gfs2_rgrpd *gfs2_rgrpd_get_first(struct gfs2_sbd *sdp);
 struct gfs2_rgrpd *gfs2_rgrpd_get_next(struct gfs2_rgrpd *rgd);
 
-void gfs2_clear_rgrpd(struct gfs2_sbd *sdp);
-int gfs2_rindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ri_gh);
+extern void gfs2_clear_rgrpd(struct gfs2_sbd *sdp);
+extern int gfs2_rindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ri_gh);
 
-int gfs2_rgrp_bh_get(struct gfs2_rgrpd *rgd);
-void gfs2_rgrp_bh_hold(struct gfs2_rgrpd *rgd);
-void gfs2_rgrp_bh_put(struct gfs2_rgrpd *rgd);
+extern int gfs2_rgrp_bh_get(struct gfs2_rgrpd *rgd);
+extern void gfs2_rgrp_bh_hold(struct gfs2_rgrpd *rgd);
+extern void gfs2_rgrp_bh_put(struct gfs2_rgrpd *rgd);
 
-void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd);
+extern void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd);
 
-struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip);
+extern struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip);
 static inline void gfs2_alloc_put(struct gfs2_inode *ip)
 {
 	BUG_ON(ip->i_alloc == NULL);
@@ -37,22 +37,22 @@ static inline void gfs2_alloc_put(struct gfs2_inode *ip)
 	ip->i_alloc = NULL;
 }
 
-int gfs2_inplace_reserve_i(struct gfs2_inode *ip,
-			 char *file, unsigned int line);
+extern int gfs2_inplace_reserve_i(struct gfs2_inode *ip, char *file,
+				  unsigned int line);
 #define gfs2_inplace_reserve(ip) \
 gfs2_inplace_reserve_i((ip), __FILE__, __LINE__)
 
-void gfs2_inplace_release(struct gfs2_inode *ip);
+extern void gfs2_inplace_release(struct gfs2_inode *ip);
 
-unsigned char gfs2_get_block_type(struct gfs2_rgrpd *rgd, u64 block);
+extern unsigned char gfs2_get_block_type(struct gfs2_rgrpd *rgd, u64 block);
 
-u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n);
-u64 gfs2_alloc_di(struct gfs2_inode *ip, u64 *generation);
+extern int gfs2_alloc_block(struct gfs2_inode *ip, u64 *bn, unsigned int *n);
+extern u64 gfs2_alloc_di(struct gfs2_inode *ip, u64 *generation);
 
-void gfs2_free_data(struct gfs2_inode *ip, u64 bstart, u32 blen);
-void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen);
-void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip);
-void gfs2_unlink_di(struct inode *inode);
+extern void gfs2_free_data(struct gfs2_inode *ip, u64 bstart, u32 blen);
+extern void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen);
+extern void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip);
+extern void gfs2_unlink_di(struct inode *inode);
 
 struct gfs2_rgrp_list {
 	unsigned int rl_rgrps;
@@ -61,10 +61,11 @@ struct gfs2_rgrp_list {
 	struct gfs2_holder *rl_ghs;
 };
 
-void gfs2_rlist_add(struct gfs2_sbd *sdp, struct gfs2_rgrp_list *rlist,
-		    u64 block);
-void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist, unsigned int state);
-void gfs2_rlist_free(struct gfs2_rgrp_list *rlist);
-u64 gfs2_ri_total(struct gfs2_sbd *sdp);
+extern void gfs2_rlist_add(struct gfs2_sbd *sdp, struct gfs2_rgrp_list *rlist,
+			   u64 block);
+extern void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist, unsigned int state);
+extern void gfs2_rlist_free(struct gfs2_rgrp_list *rlist);
+extern u64 gfs2_ri_total(struct gfs2_sbd *sdp);
+extern int gfs2_rgrp_dump(struct seq_file *seq, const struct gfs2_glock *gl);
 
 #endif /* __RGRP_DOT_H__ */
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 601913e0a48..0a680133647 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -7,14 +7,20 @@
  * of the GNU General Public License version 2.
  */
 
+#include <linux/bio.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/buffer_head.h>
-#include <linux/crc32.h>
+#include <linux/statfs.h>
+#include <linux/seq_file.h>
+#include <linux/mount.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
 #include <linux/gfs2_ondisk.h>
-#include <linux/bio.h>
+#include <linux/crc32.h>
+#include <linux/time.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -31,6 +37,183 @@
 #include "super.h"
 #include "trans.h"
 #include "util.h"
+#include "sys.h"
+#include "eattr.h"
+
+#define args_neq(a1, a2, x) ((a1)->ar_##x != (a2)->ar_##x)
+
+enum {
+	Opt_lockproto,
+	Opt_locktable,
+	Opt_hostdata,
+	Opt_spectator,
+	Opt_ignore_local_fs,
+	Opt_localflocks,
+	Opt_localcaching,
+	Opt_debug,
+	Opt_nodebug,
+	Opt_upgrade,
+	Opt_acl,
+	Opt_noacl,
+	Opt_quota_off,
+	Opt_quota_account,
+	Opt_quota_on,
+	Opt_quota,
+	Opt_noquota,
+	Opt_suiddir,
+	Opt_nosuiddir,
+	Opt_data_writeback,
+	Opt_data_ordered,
+	Opt_meta,
+	Opt_discard,
+	Opt_nodiscard,
+	Opt_commit,
+	Opt_error,
+};
+
+static const match_table_t tokens = {
+	{Opt_lockproto, "lockproto=%s"},
+	{Opt_locktable, "locktable=%s"},
+	{Opt_hostdata, "hostdata=%s"},
+	{Opt_spectator, "spectator"},
+	{Opt_ignore_local_fs, "ignore_local_fs"},
+	{Opt_localflocks, "localflocks"},
+	{Opt_localcaching, "localcaching"},
+	{Opt_debug, "debug"},
+	{Opt_nodebug, "nodebug"},
+	{Opt_upgrade, "upgrade"},
+	{Opt_acl, "acl"},
+	{Opt_noacl, "noacl"},
+	{Opt_quota_off, "quota=off"},
+	{Opt_quota_account, "quota=account"},
+	{Opt_quota_on, "quota=on"},
+	{Opt_quota, "quota"},
+	{Opt_noquota, "noquota"},
+	{Opt_suiddir, "suiddir"},
+	{Opt_nosuiddir, "nosuiddir"},
+	{Opt_data_writeback, "data=writeback"},
+	{Opt_data_ordered, "data=ordered"},
+	{Opt_meta, "meta"},
+	{Opt_discard, "discard"},
+	{Opt_nodiscard, "nodiscard"},
+	{Opt_commit, "commit=%d"},
+	{Opt_error, NULL}
+};
+
+/**
+ * gfs2_mount_args - Parse mount options
+ * @sdp:
+ * @data:
+ *
+ * Return: errno
+ */
+
+int gfs2_mount_args(struct gfs2_sbd *sdp, struct gfs2_args *args, char *options)
+{
+	char *o;
+	int token;
+	substring_t tmp[MAX_OPT_ARGS];
+	int rv;
+
+	/* Split the options into tokens with the "," character and
+	   process them */
+
+	while (1) {
+		o = strsep(&options, ",");
+		if (o == NULL)
+			break;
+		if (*o == '\0')
+			continue;
+
+		token = match_token(o, tokens, tmp);
+		switch (token) {
+		case Opt_lockproto:
+			match_strlcpy(args->ar_lockproto, &tmp[0],
+				      GFS2_LOCKNAME_LEN);
+			break;
+		case Opt_locktable:
+			match_strlcpy(args->ar_locktable, &tmp[0],
+				      GFS2_LOCKNAME_LEN);
+			break;
+		case Opt_hostdata:
+			match_strlcpy(args->ar_hostdata, &tmp[0],
+				      GFS2_LOCKNAME_LEN);
+			break;
+		case Opt_spectator:
+			args->ar_spectator = 1;
+			break;
+		case Opt_ignore_local_fs:
+			args->ar_ignore_local_fs = 1;
+			break;
+		case Opt_localflocks:
+			args->ar_localflocks = 1;
+			break;
+		case Opt_localcaching:
+			args->ar_localcaching = 1;
+			break;
+		case Opt_debug:
+			args->ar_debug = 1;
+			break;
+		case Opt_nodebug:
+			args->ar_debug = 0;
+			break;
+		case Opt_upgrade:
+			args->ar_upgrade = 1;
+			break;
+		case Opt_acl:
+			args->ar_posix_acl = 1;
+			break;
+		case Opt_noacl:
+			args->ar_posix_acl = 0;
+			break;
+		case Opt_quota_off:
+		case Opt_noquota:
+			args->ar_quota = GFS2_QUOTA_OFF;
+			break;
+		case Opt_quota_account:
+			args->ar_quota = GFS2_QUOTA_ACCOUNT;
+			break;
+		case Opt_quota_on:
+		case Opt_quota:
+			args->ar_quota = GFS2_QUOTA_ON;
+			break;
+		case Opt_suiddir:
+			args->ar_suiddir = 1;
+			break;
+		case Opt_nosuiddir:
+			args->ar_suiddir = 0;
+			break;
+		case Opt_data_writeback:
+			args->ar_data = GFS2_DATA_WRITEBACK;
+			break;
+		case Opt_data_ordered:
+			args->ar_data = GFS2_DATA_ORDERED;
+			break;
+		case Opt_meta:
+			args->ar_meta = 1;
+			break;
+		case Opt_discard:
+			args->ar_discard = 1;
+			break;
+		case Opt_nodiscard:
+			args->ar_discard = 0;
+			break;
+		case Opt_commit:
+			rv = match_int(&tmp[0], &args->ar_commit);
+			if (rv || args->ar_commit <= 0) {
+				fs_info(sdp, "commit mount option requires a positive numeric argument\n");
+				return rv ? rv : -EINVAL;
+			}
+			break;
+		case Opt_error:
+		default:
+			fs_info(sdp, "invalid mount option: %s\n", o);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
 
 /**
  * gfs2_jindex_free - Clear all the journal index information
@@ -436,3 +619,706 @@ void gfs2_unfreeze_fs(struct gfs2_sbd *sdp)
 	mutex_unlock(&sdp->sd_freeze_lock);
 }
 
+
+/**
+ * gfs2_write_inode - Make sure the inode is stable on the disk
+ * @inode: The inode
+ * @sync: synchronous write flag
+ *
+ * Returns: errno
+ */
+
+static int gfs2_write_inode(struct inode *inode, int sync)
+{
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_holder gh;
+	struct buffer_head *bh;
+	struct timespec atime;
+	struct gfs2_dinode *di;
+	int ret = 0;
+
+	/* Check this is a "normal" inode, etc */
+	if (!test_bit(GIF_USER, &ip->i_flags) ||
+	    (current->flags & PF_MEMALLOC))
+		return 0;
+	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+	if (ret)
+		goto do_flush;
+	ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
+	if (ret)
+		goto do_unlock;
+	ret = gfs2_meta_inode_buffer(ip, &bh);
+	if (ret == 0) {
+		di = (struct gfs2_dinode *)bh->b_data;
+		atime.tv_sec = be64_to_cpu(di->di_atime);
+		atime.tv_nsec = be32_to_cpu(di->di_atime_nsec);
+		if (timespec_compare(&inode->i_atime, &atime) > 0) {
+			gfs2_trans_add_bh(ip->i_gl, bh, 1);
+			gfs2_dinode_out(ip, bh->b_data);
+		}
+		brelse(bh);
+	}
+	gfs2_trans_end(sdp);
+do_unlock:
+	gfs2_glock_dq_uninit(&gh);
+do_flush:
+	if (sync != 0)
+		gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
+	return ret;
+}
+
+/**
+ * gfs2_make_fs_ro - Turn a Read-Write FS into a Read-Only one
+ * @sdp: the filesystem
+ *
+ * Returns: errno
+ */
+
+static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
+{
+	struct gfs2_holder t_gh;
+	int error;
+
+	gfs2_quota_sync(sdp);
+	gfs2_statfs_sync(sdp);
+
+	error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, GL_NOCACHE,
+				   &t_gh);
+	if (error && !test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
+		return error;
+
+	gfs2_meta_syncfs(sdp);
+	gfs2_log_shutdown(sdp);
+
+	clear_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
+
+	if (t_gh.gh_gl)
+		gfs2_glock_dq_uninit(&t_gh);
+
+	gfs2_quota_cleanup(sdp);
+
+	return error;
+}
+
+static int gfs2_umount_recovery_wait(void *word)
+{
+	schedule();
+	return 0;
+}
+
+/**
+ * gfs2_put_super - Unmount the filesystem
+ * @sb: The VFS superblock
+ *
+ */
+
+static void gfs2_put_super(struct super_block *sb)
+{
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	int error;
+	struct gfs2_jdesc *jd;
+
+	/*  Unfreeze the filesystem, if we need to  */
+
+	mutex_lock(&sdp->sd_freeze_lock);
+	if (sdp->sd_freeze_count)
+		gfs2_glock_dq_uninit(&sdp->sd_freeze_gh);
+	mutex_unlock(&sdp->sd_freeze_lock);
+
+	/* No more recovery requests */
+	set_bit(SDF_NORECOVERY, &sdp->sd_flags);
+	smp_mb();
+
+	/* Wait on outstanding recovery */
+restart:
+	spin_lock(&sdp->sd_jindex_spin);
+	list_for_each_entry(jd, &sdp->sd_jindex_list, jd_list) {
+		if (!test_bit(JDF_RECOVERY, &jd->jd_flags))
+			continue;
+		spin_unlock(&sdp->sd_jindex_spin);
+		wait_on_bit(&jd->jd_flags, JDF_RECOVERY,
+			    gfs2_umount_recovery_wait, TASK_UNINTERRUPTIBLE);
+		goto restart;
+	}
+	spin_unlock(&sdp->sd_jindex_spin);
+
+	kthread_stop(sdp->sd_quotad_process);
+	kthread_stop(sdp->sd_logd_process);
+
+	if (!(sb->s_flags & MS_RDONLY)) {
+		error = gfs2_make_fs_ro(sdp);
+		if (error)
+			gfs2_io_error(sdp);
+	}
+	/*  At this point, we're through modifying the disk  */
+
+	/*  Release stuff  */
+
+	iput(sdp->sd_jindex);
+	iput(sdp->sd_inum_inode);
+	iput(sdp->sd_statfs_inode);
+	iput(sdp->sd_rindex);
+	iput(sdp->sd_quota_inode);
+
+	gfs2_glock_put(sdp->sd_rename_gl);
+	gfs2_glock_put(sdp->sd_trans_gl);
+
+	if (!sdp->sd_args.ar_spectator) {
+		gfs2_glock_dq_uninit(&sdp->sd_journal_gh);
+		gfs2_glock_dq_uninit(&sdp->sd_jinode_gh);
+		gfs2_glock_dq_uninit(&sdp->sd_ir_gh);
+		gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
+		gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
+		iput(sdp->sd_ir_inode);
+		iput(sdp->sd_sc_inode);
+		iput(sdp->sd_qc_inode);
+	}
+
+	gfs2_glock_dq_uninit(&sdp->sd_live_gh);
+	gfs2_clear_rgrpd(sdp);
+	gfs2_jindex_free(sdp);
+	/*  Take apart glock structures and buffer lists  */
+	gfs2_gl_hash_clear(sdp);
+	/*  Unmount the locking protocol  */
+	gfs2_lm_unmount(sdp);
+
+	/*  At this point, we're through participating in the lockspace  */
+	gfs2_sys_fs_del(sdp);
+}
+
+/**
+ * gfs2_sync_fs - sync the filesystem
+ * @sb: the superblock
+ *
+ * Flushes the log to disk.
+ */
+
+static int gfs2_sync_fs(struct super_block *sb, int wait)
+{
+	if (wait && sb->s_fs_info)
+		gfs2_log_flush(sb->s_fs_info, NULL);
+	return 0;
+}
+
+/**
+ * gfs2_freeze - prevent further writes to the filesystem
+ * @sb: the VFS structure for the filesystem
+ *
+ */
+
+static int gfs2_freeze(struct super_block *sb)
+{
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	int error;
+
+	if (test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
+		return -EINVAL;
+
+	for (;;) {
+		error = gfs2_freeze_fs(sdp);
+		if (!error)
+			break;
+
+		switch (error) {
+		case -EBUSY:
+			fs_err(sdp, "waiting for recovery before freeze\n");
+			break;
+
+		default:
+			fs_err(sdp, "error freezing FS: %d\n", error);
+			break;
+		}
+
+		fs_err(sdp, "retrying...\n");
+		msleep(1000);
+	}
+	return 0;
+}
+
+/**
+ * gfs2_unfreeze - reallow writes to the filesystem
+ * @sb: the VFS structure for the filesystem
+ *
+ */
+
+static int gfs2_unfreeze(struct super_block *sb)
+{
+	gfs2_unfreeze_fs(sb->s_fs_info);
+	return 0;
+}
+
+/**
+ * statfs_fill - fill in the sg for a given RG
+ * @rgd: the RG
+ * @sc: the sc structure
+ *
+ * Returns: 0 on success, -ESTALE if the LVB is invalid
+ */
+
+static int statfs_slow_fill(struct gfs2_rgrpd *rgd,
+			    struct gfs2_statfs_change_host *sc)
+{
+	gfs2_rgrp_verify(rgd);
+	sc->sc_total += rgd->rd_data;
+	sc->sc_free += rgd->rd_free;
+	sc->sc_dinodes += rgd->rd_dinodes;
+	return 0;
+}
+
+/**
+ * gfs2_statfs_slow - Stat a filesystem using asynchronous locking
+ * @sdp: the filesystem
+ * @sc: the sc info that will be returned
+ *
+ * Any error (other than a signal) will cause this routine to fall back
+ * to the synchronous version.
+ *
+ * FIXME: This really shouldn't busy wait like this.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_statfs_slow(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
+{
+	struct gfs2_holder ri_gh;
+	struct gfs2_rgrpd *rgd_next;
+	struct gfs2_holder *gha, *gh;
+	unsigned int slots = 64;
+	unsigned int x;
+	int done;
+	int error = 0, err;
+
+	memset(sc, 0, sizeof(struct gfs2_statfs_change_host));
+	gha = kcalloc(slots, sizeof(struct gfs2_holder), GFP_KERNEL);
+	if (!gha)
+		return -ENOMEM;
+
+	error = gfs2_rindex_hold(sdp, &ri_gh);
+	if (error)
+		goto out;
+
+	rgd_next = gfs2_rgrpd_get_first(sdp);
+
+	for (;;) {
+		done = 1;
+
+		for (x = 0; x < slots; x++) {
+			gh = gha + x;
+
+			if (gh->gh_gl && gfs2_glock_poll(gh)) {
+				err = gfs2_glock_wait(gh);
+				if (err) {
+					gfs2_holder_uninit(gh);
+					error = err;
+				} else {
+					if (!error)
+						error = statfs_slow_fill(
+							gh->gh_gl->gl_object, sc);
+					gfs2_glock_dq_uninit(gh);
+				}
+			}
+
+			if (gh->gh_gl)
+				done = 0;
+			else if (rgd_next && !error) {
+				error = gfs2_glock_nq_init(rgd_next->rd_gl,
+							   LM_ST_SHARED,
+							   GL_ASYNC,
+							   gh);
+				rgd_next = gfs2_rgrpd_get_next(rgd_next);
+				done = 0;
+			}
+
+			if (signal_pending(current))
+				error = -ERESTARTSYS;
+		}
+
+		if (done)
+			break;
+
+		yield();
+	}
+
+	gfs2_glock_dq_uninit(&ri_gh);
+
+out:
+	kfree(gha);
+	return error;
+}
+
+/**
+ * gfs2_statfs_i - Do a statfs
+ * @sdp: the filesystem
+ * @sg: the sg structure
+ *
+ * Returns: errno
+ */
+
+static int gfs2_statfs_i(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
+{
+	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
+	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+
+	spin_lock(&sdp->sd_statfs_spin);
+
+	*sc = *m_sc;
+	sc->sc_total += l_sc->sc_total;
+	sc->sc_free += l_sc->sc_free;
+	sc->sc_dinodes += l_sc->sc_dinodes;
+
+	spin_unlock(&sdp->sd_statfs_spin);
+
+	if (sc->sc_free < 0)
+		sc->sc_free = 0;
+	if (sc->sc_free > sc->sc_total)
+		sc->sc_free = sc->sc_total;
+	if (sc->sc_dinodes < 0)
+		sc->sc_dinodes = 0;
+
+	return 0;
+}
+
+/**
+ * gfs2_statfs - Gather and return stats about the filesystem
+ * @sb: The superblock
+ * @statfsbuf: The buffer
+ *
+ * Returns: 0 on success or error code
+ */
+
+static int gfs2_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	struct super_block *sb = dentry->d_inode->i_sb;
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	struct gfs2_statfs_change_host sc;
+	int error;
+
+	if (gfs2_tune_get(sdp, gt_statfs_slow))
+		error = gfs2_statfs_slow(sdp, &sc);
+	else
+		error = gfs2_statfs_i(sdp, &sc);
+
+	if (error)
+		return error;
+
+	buf->f_type = GFS2_MAGIC;
+	buf->f_bsize = sdp->sd_sb.sb_bsize;
+	buf->f_blocks = sc.sc_total;
+	buf->f_bfree = sc.sc_free;
+	buf->f_bavail = sc.sc_free;
+	buf->f_files = sc.sc_dinodes + sc.sc_free;
+	buf->f_ffree = sc.sc_free;
+	buf->f_namelen = GFS2_FNAMESIZE;
+
+	return 0;
+}
+
+/**
+ * gfs2_remount_fs - called when the FS is remounted
+ * @sb:  the filesystem
+ * @flags:  the remount flags
+ * @data:  extra data passed in (not used right now)
+ *
+ * Returns: errno
+ */
+
+static int gfs2_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	struct gfs2_args args = sdp->sd_args; /* Default to current settings */
+	struct gfs2_tune *gt = &sdp->sd_tune;
+	int error;
+
+	spin_lock(&gt->gt_spin);
+	args.ar_commit = gt->gt_log_flush_secs;
+	spin_unlock(&gt->gt_spin);
+	error = gfs2_mount_args(sdp, &args, data);
+	if (error)
+		return error;
+
+	/* Not allowed to change locking details */
+	if (strcmp(args.ar_lockproto, sdp->sd_args.ar_lockproto) ||
+	    strcmp(args.ar_locktable, sdp->sd_args.ar_locktable) ||
+	    strcmp(args.ar_hostdata, sdp->sd_args.ar_hostdata))
+		return -EINVAL;
+
+	/* Some flags must not be changed */
+	if (args_neq(&args, &sdp->sd_args, spectator) ||
+	    args_neq(&args, &sdp->sd_args, ignore_local_fs) ||
+	    args_neq(&args, &sdp->sd_args, localflocks) ||
+	    args_neq(&args, &sdp->sd_args, localcaching) ||
+	    args_neq(&args, &sdp->sd_args, meta))
+		return -EINVAL;
+
+	if (sdp->sd_args.ar_spectator)
+		*flags |= MS_RDONLY;
+
+	if ((sb->s_flags ^ *flags) & MS_RDONLY) {
+		if (*flags & MS_RDONLY)
+			error = gfs2_make_fs_ro(sdp);
+		else
+			error = gfs2_make_fs_rw(sdp);
+		if (error)
+			return error;
+	}
+
+	sdp->sd_args = args;
+	if (sdp->sd_args.ar_posix_acl)
+		sb->s_flags |= MS_POSIXACL;
+	else
+		sb->s_flags &= ~MS_POSIXACL;
+	spin_lock(&gt->gt_spin);
+	gt->gt_log_flush_secs = args.ar_commit;
+	spin_unlock(&gt->gt_spin);
+
+	return 0;
+}
+
+/**
+ * gfs2_drop_inode - Drop an inode (test for remote unlink)
+ * @inode: The inode to drop
+ *
+ * If we've received a callback on an iopen lock then its because a
+ * remote node tried to deallocate the inode but failed due to this node
+ * still having the inode open. Here we mark the link count zero
+ * since we know that it must have reached zero if the GLF_DEMOTE flag
+ * is set on the iopen glock. If we didn't do a disk read since the
+ * remote node removed the final link then we might otherwise miss
+ * this event. This check ensures that this node will deallocate the
+ * inode's blocks, or alternatively pass the baton on to another
+ * node for later deallocation.
+ */
+
+static void gfs2_drop_inode(struct inode *inode)
+{
+	struct gfs2_inode *ip = GFS2_I(inode);
+
+	if (test_bit(GIF_USER, &ip->i_flags) && inode->i_nlink) {
+		struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
+		if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
+			clear_nlink(inode);
+	}
+	generic_drop_inode(inode);
+}
+
+/**
+ * gfs2_clear_inode - Deallocate an inode when VFS is done with it
+ * @inode: The VFS inode
+ *
+ */
+
+static void gfs2_clear_inode(struct inode *inode)
+{
+	struct gfs2_inode *ip = GFS2_I(inode);
+
+	/* This tells us its a "real" inode and not one which only
+	 * serves to contain an address space (see rgrp.c, meta_io.c)
+	 * which therefore doesn't have its own glocks.
+	 */
+	if (test_bit(GIF_USER, &ip->i_flags)) {
+		ip->i_gl->gl_object = NULL;
+		gfs2_glock_put(ip->i_gl);
+		ip->i_gl = NULL;
+		if (ip->i_iopen_gh.gh_gl) {
+			ip->i_iopen_gh.gh_gl->gl_object = NULL;
+			gfs2_glock_dq_uninit(&ip->i_iopen_gh);
+		}
+	}
+}
+
+static int is_ancestor(const struct dentry *d1, const struct dentry *d2)
+{
+	do {
+		if (d1 == d2)
+			return 1;
+		d1 = d1->d_parent;
+	} while (!IS_ROOT(d1));
+	return 0;
+}
+
+/**
+ * gfs2_show_options - Show mount options for /proc/mounts
+ * @s: seq_file structure
+ * @mnt: vfsmount
+ *
+ * Returns: 0 on success or error code
+ */
+
+static int gfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
+{
+	struct gfs2_sbd *sdp = mnt->mnt_sb->s_fs_info;
+	struct gfs2_args *args = &sdp->sd_args;
+	int lfsecs;
+
+	if (is_ancestor(mnt->mnt_root, sdp->sd_master_dir))
+		seq_printf(s, ",meta");
+	if (args->ar_lockproto[0])
+		seq_printf(s, ",lockproto=%s", args->ar_lockproto);
+	if (args->ar_locktable[0])
+		seq_printf(s, ",locktable=%s", args->ar_locktable);
+	if (args->ar_hostdata[0])
+		seq_printf(s, ",hostdata=%s", args->ar_hostdata);
+	if (args->ar_spectator)
+		seq_printf(s, ",spectator");
+	if (args->ar_ignore_local_fs)
+		seq_printf(s, ",ignore_local_fs");
+	if (args->ar_localflocks)
+		seq_printf(s, ",localflocks");
+	if (args->ar_localcaching)
+		seq_printf(s, ",localcaching");
+	if (args->ar_debug)
+		seq_printf(s, ",debug");
+	if (args->ar_upgrade)
+		seq_printf(s, ",upgrade");
+	if (args->ar_posix_acl)
+		seq_printf(s, ",acl");
+	if (args->ar_quota != GFS2_QUOTA_DEFAULT) {
+		char *state;
+		switch (args->ar_quota) {
+		case GFS2_QUOTA_OFF:
+			state = "off";
+			break;
+		case GFS2_QUOTA_ACCOUNT:
+			state = "account";
+			break;
+		case GFS2_QUOTA_ON:
+			state = "on";
+			break;
+		default:
+			state = "unknown";
+			break;
+		}
+		seq_printf(s, ",quota=%s", state);
+	}
+	if (args->ar_suiddir)
+		seq_printf(s, ",suiddir");
+	if (args->ar_data != GFS2_DATA_DEFAULT) {
+		char *state;
+		switch (args->ar_data) {
+		case GFS2_DATA_WRITEBACK:
+			state = "writeback";
+			break;
+		case GFS2_DATA_ORDERED:
+			state = "ordered";
+			break;
+		default:
+			state = "unknown";
+			break;
+		}
+		seq_printf(s, ",data=%s", state);
+	}
+	if (args->ar_discard)
+		seq_printf(s, ",discard");
+	lfsecs = sdp->sd_tune.gt_log_flush_secs;
+	if (lfsecs != 60)
+		seq_printf(s, ",commit=%d", lfsecs);
+	return 0;
+}
+
+/*
+ * We have to (at the moment) hold the inodes main lock to cover
+ * the gap between unlocking the shared lock on the iopen lock and
+ * taking the exclusive lock. I'd rather do a shared -> exclusive
+ * conversion on the iopen lock, but we can change that later. This
+ * is safe, just less efficient.
+ */
+
+static void gfs2_delete_inode(struct inode *inode)
+{
+	struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder gh;
+	int error;
+
+	if (!test_bit(GIF_USER, &ip->i_flags))
+		goto out;
+
+	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+	if (unlikely(error)) {
+		gfs2_glock_dq_uninit(&ip->i_iopen_gh);
+		goto out;
+	}
+
+	gfs2_glock_dq_wait(&ip->i_iopen_gh);
+	gfs2_holder_reinit(LM_ST_EXCLUSIVE, LM_FLAG_TRY_1CB | GL_NOCACHE, &ip->i_iopen_gh);
+	error = gfs2_glock_nq(&ip->i_iopen_gh);
+	if (error)
+		goto out_truncate;
+
+	if (S_ISDIR(inode->i_mode) &&
+	    (ip->i_diskflags & GFS2_DIF_EXHASH)) {
+		error = gfs2_dir_exhash_dealloc(ip);
+		if (error)
+			goto out_unlock;
+	}
+
+	if (ip->i_eattr) {
+		error = gfs2_ea_dealloc(ip);
+		if (error)
+			goto out_unlock;
+	}
+
+	if (!gfs2_is_stuffed(ip)) {
+		error = gfs2_file_dealloc(ip);
+		if (error)
+			goto out_unlock;
+	}
+
+	error = gfs2_dinode_dealloc(ip);
+	if (error)
+		goto out_unlock;
+
+out_truncate:
+	error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
+	if (error)
+		goto out_unlock;
+	/* Needs to be done before glock release & also in a transaction */
+	truncate_inode_pages(&inode->i_data, 0);
+	gfs2_trans_end(sdp);
+
+out_unlock:
+	if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags))
+		gfs2_glock_dq(&ip->i_iopen_gh);
+	gfs2_holder_uninit(&ip->i_iopen_gh);
+	gfs2_glock_dq_uninit(&gh);
+	if (error && error != GLR_TRYFAILED && error != -EROFS)
+		fs_warn(sdp, "gfs2_delete_inode: %d\n", error);
+out:
+	truncate_inode_pages(&inode->i_data, 0);
+	clear_inode(inode);
+}
+
+static struct inode *gfs2_alloc_inode(struct super_block *sb)
+{
+	struct gfs2_inode *ip;
+
+	ip = kmem_cache_alloc(gfs2_inode_cachep, GFP_KERNEL);
+	if (ip) {
+		ip->i_flags = 0;
+		ip->i_gl = NULL;
+	}
+	return &ip->i_inode;
+}
+
+static void gfs2_destroy_inode(struct inode *inode)
+{
+	kmem_cache_free(gfs2_inode_cachep, inode);
+}
+
+const struct super_operations gfs2_super_ops = {
+	.alloc_inode		= gfs2_alloc_inode,
+	.destroy_inode		= gfs2_destroy_inode,
+	.write_inode		= gfs2_write_inode,
+	.delete_inode		= gfs2_delete_inode,
+	.put_super		= gfs2_put_super,
+	.sync_fs		= gfs2_sync_fs,
+	.freeze_fs 		= gfs2_freeze,
+	.unfreeze_fs		= gfs2_unfreeze,
+	.statfs			= gfs2_statfs,
+	.remount_fs		= gfs2_remount_fs,
+	.clear_inode		= gfs2_clear_inode,
+	.drop_inode		= gfs2_drop_inode,
+	.show_options		= gfs2_show_options,
+};
+
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 7655f5025fe..23419dc3027 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -26,6 +26,36 @@
 #include "util.h"
 #include "glops.h"
 
+struct gfs2_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct gfs2_sbd *, char *);
+	ssize_t (*store)(struct gfs2_sbd *, const char *, size_t);
+};
+
+static ssize_t gfs2_attr_show(struct kobject *kobj, struct attribute *attr,
+			      char *buf)
+{
+	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
+	struct gfs2_attr *a = container_of(attr, struct gfs2_attr, attr);
+	return a->show ? a->show(sdp, buf) : 0;
+}
+
+static ssize_t gfs2_attr_store(struct kobject *kobj, struct attribute *attr,
+			       const char *buf, size_t len)
+{
+	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
+	struct gfs2_attr *a = container_of(attr, struct gfs2_attr, attr);
+	return a->store ? a->store(sdp, buf, len) : len;
+}
+
+static struct sysfs_ops gfs2_attr_ops = {
+	.show  = gfs2_attr_show,
+	.store = gfs2_attr_store,
+};
+
+
+static struct kset *gfs2_kset;
+
 static ssize_t id_show(struct gfs2_sbd *sdp, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%u:%u\n",
@@ -212,11 +242,6 @@ static ssize_t demote_rq_store(struct gfs2_sbd *sdp, const char *buf, size_t len
 	return len;
 }
 
-struct gfs2_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct gfs2_sbd *, char *);
-	ssize_t (*store)(struct gfs2_sbd *, const char *, size_t);
-};
 
 #define GFS2_ATTR(name, mode, show, store) \
 static struct gfs2_attr gfs2_attr_##name = __ATTR(name, mode, show, store)
@@ -246,58 +271,11 @@ static struct attribute *gfs2_attrs[] = {
 	NULL,
 };
 
-static ssize_t gfs2_attr_show(struct kobject *kobj, struct attribute *attr,
-			      char *buf)
-{
-	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
-	struct gfs2_attr *a = container_of(attr, struct gfs2_attr, attr);
-	return a->show ? a->show(sdp, buf) : 0;
-}
-
-static ssize_t gfs2_attr_store(struct kobject *kobj, struct attribute *attr,
-			       const char *buf, size_t len)
-{
-	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
-	struct gfs2_attr *a = container_of(attr, struct gfs2_attr, attr);
-	return a->store ? a->store(sdp, buf, len) : len;
-}
-
-static struct sysfs_ops gfs2_attr_ops = {
-	.show  = gfs2_attr_show,
-	.store = gfs2_attr_store,
-};
-
 static struct kobj_type gfs2_ktype = {
 	.default_attrs = gfs2_attrs,
 	.sysfs_ops     = &gfs2_attr_ops,
 };
 
-static struct kset *gfs2_kset;
-
-/*
- * display struct lm_lockstruct fields
- */
-
-struct lockstruct_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct gfs2_sbd *, char *);
-};
-
-#define LOCKSTRUCT_ATTR(name, fmt)                                          \
-static ssize_t name##_show(struct gfs2_sbd *sdp, char *buf)                 \
-{                                                                           \
-	return snprintf(buf, PAGE_SIZE, fmt, sdp->sd_lockstruct.ls_##name); \
-}                                                                           \
-static struct lockstruct_attr lockstruct_attr_##name = __ATTR_RO(name)
-
-LOCKSTRUCT_ATTR(jid,      "%u\n");
-LOCKSTRUCT_ATTR(first,    "%u\n");
-
-static struct attribute *lockstruct_attrs[] = {
-	&lockstruct_attr_jid.attr,
-	&lockstruct_attr_first.attr,
-	NULL,
-};
 
 /*
  * lock_module. Originally from lock_dlm
@@ -359,34 +337,33 @@ static ssize_t first_done_show(struct gfs2_sbd *sdp, char *buf)
 	return sprintf(buf, "%d\n", ls->ls_first_done);
 }
 
-static ssize_t recover_show(struct gfs2_sbd *sdp, char *buf)
-{
-	struct lm_lockstruct *ls = &sdp->sd_lockstruct;
-	return sprintf(buf, "%d\n", ls->ls_recover_jid);
-}
-
-static void gfs2_jdesc_make_dirty(struct gfs2_sbd *sdp, unsigned int jid)
+static ssize_t recover_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
 {
+	unsigned jid;
 	struct gfs2_jdesc *jd;
+	int rv;
+
+	rv = sscanf(buf, "%u", &jid);
+	if (rv != 1)
+		return -EINVAL;
 
+	rv = -ESHUTDOWN;
 	spin_lock(&sdp->sd_jindex_spin);
+	if (test_bit(SDF_NORECOVERY, &sdp->sd_flags))
+		goto out;
+	rv = -EBUSY;
+	if (sdp->sd_jdesc->jd_jid == jid)
+		goto out;
+	rv = -ENOENT;
 	list_for_each_entry(jd, &sdp->sd_jindex_list, jd_list) {
 		if (jd->jd_jid != jid)
 			continue;
-		jd->jd_dirty = 1;
+		rv = slow_work_enqueue(&jd->jd_work);
 		break;
 	}
+out:
 	spin_unlock(&sdp->sd_jindex_spin);
-}
-
-static ssize_t recover_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
-{
-	struct lm_lockstruct *ls = &sdp->sd_lockstruct;
-	ls->ls_recover_jid = simple_strtol(buf, NULL, 0);
-	gfs2_jdesc_make_dirty(sdp, ls->ls_recover_jid);
-	if (sdp->sd_recoverd_process)
-		wake_up_process(sdp->sd_recoverd_process);
-	return len;
+	return rv ? rv : len;
 }
 
 static ssize_t recover_done_show(struct gfs2_sbd *sdp, char *buf)
@@ -401,31 +378,31 @@ static ssize_t recover_status_show(struct gfs2_sbd *sdp, char *buf)
 	return sprintf(buf, "%d\n", ls->ls_recover_jid_status);
 }
 
-struct gdlm_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct gfs2_sbd *sdp, char *);
-	ssize_t (*store)(struct gfs2_sbd *sdp, const char *, size_t);
-};
+static ssize_t jid_show(struct gfs2_sbd *sdp, char *buf)
+{
+	return sprintf(buf, "%u\n", sdp->sd_lockstruct.ls_jid);
+}
 
 #define GDLM_ATTR(_name,_mode,_show,_store) \
-static struct gdlm_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-GDLM_ATTR(proto_name,     0444, proto_name_show,     NULL);
-GDLM_ATTR(block,          0644, block_show,          block_store);
-GDLM_ATTR(withdraw,       0644, withdraw_show,       withdraw_store);
-GDLM_ATTR(id,             0444, lkid_show,           NULL);
-GDLM_ATTR(first,          0444, lkfirst_show,        NULL);
-GDLM_ATTR(first_done,     0444, first_done_show,     NULL);
-GDLM_ATTR(recover,        0644, recover_show,        recover_store);
-GDLM_ATTR(recover_done,   0444, recover_done_show,   NULL);
-GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
+static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+GDLM_ATTR(proto_name,     0444, proto_name_show,	NULL);
+GDLM_ATTR(block,          0644, block_show,		block_store);
+GDLM_ATTR(withdraw,       0644, withdraw_show,		withdraw_store);
+GDLM_ATTR(id,             0444, lkid_show,		NULL);
+GDLM_ATTR(jid,		  0444, jid_show,		NULL);
+GDLM_ATTR(first,          0444, lkfirst_show,		NULL);
+GDLM_ATTR(first_done,     0444, first_done_show,	NULL);
+GDLM_ATTR(recover,        0200, NULL,			recover_store);
+GDLM_ATTR(recover_done,   0444, recover_done_show,	NULL);
+GDLM_ATTR(recover_status, 0444, recover_status_show,	NULL);
 
 static struct attribute *lock_module_attrs[] = {
 	&gdlm_attr_proto_name.attr,
 	&gdlm_attr_block.attr,
 	&gdlm_attr_withdraw.attr,
 	&gdlm_attr_id.attr,
-	&lockstruct_attr_jid.attr,
+	&gdlm_attr_jid.attr,
 	&gdlm_attr_first.attr,
 	&gdlm_attr_first_done.attr,
 	&gdlm_attr_recover.attr,
@@ -435,53 +412,6 @@ static struct attribute *lock_module_attrs[] = {
 };
 
 /*
- * display struct gfs2_args fields
- */
-
-struct args_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct gfs2_sbd *, char *);
-};
-
-#define ARGS_ATTR(name, fmt)                                                \
-static ssize_t name##_show(struct gfs2_sbd *sdp, char *buf)                 \
-{                                                                           \
-	return snprintf(buf, PAGE_SIZE, fmt, sdp->sd_args.ar_##name);       \
-}                                                                           \
-static struct args_attr args_attr_##name = __ATTR_RO(name)
-
-ARGS_ATTR(lockproto,       "%s\n");
-ARGS_ATTR(locktable,       "%s\n");
-ARGS_ATTR(hostdata,        "%s\n");
-ARGS_ATTR(spectator,       "%d\n");
-ARGS_ATTR(ignore_local_fs, "%d\n");
-ARGS_ATTR(localcaching,    "%d\n");
-ARGS_ATTR(localflocks,     "%d\n");
-ARGS_ATTR(debug,           "%d\n");
-ARGS_ATTR(upgrade,         "%d\n");
-ARGS_ATTR(posix_acl,       "%d\n");
-ARGS_ATTR(quota,           "%u\n");
-ARGS_ATTR(suiddir,         "%d\n");
-ARGS_ATTR(data,            "%d\n");
-
-static struct attribute *args_attrs[] = {
-	&args_attr_lockproto.attr,
-	&args_attr_locktable.attr,
-	&args_attr_hostdata.attr,
-	&args_attr_spectator.attr,
-	&args_attr_ignore_local_fs.attr,
-	&args_attr_localcaching.attr,
-	&args_attr_localflocks.attr,
-	&args_attr_debug.attr,
-	&args_attr_upgrade.attr,
-	&args_attr_posix_acl.attr,
-	&args_attr_quota.attr,
-	&args_attr_suiddir.attr,
-	&args_attr_data.attr,
-	NULL,
-};
-
-/*
  * get and set struct gfs2_tune fields
  */
 
@@ -531,14 +461,8 @@ static ssize_t tune_set(struct gfs2_sbd *sdp, unsigned int *field,
 	return len;
 }
 
-struct tune_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct gfs2_sbd *, char *);
-	ssize_t (*store)(struct gfs2_sbd *, const char *, size_t);
-};
-
 #define TUNE_ATTR_3(name, show, store)                                        \
-static struct tune_attr tune_attr_##name = __ATTR(name, 0644, show, store)
+static struct gfs2_attr tune_attr_##name = __ATTR(name, 0644, show, store)
 
 #define TUNE_ATTR_2(name, store)                                              \
 static ssize_t name##_show(struct gfs2_sbd *sdp, char *buf)                   \
@@ -554,15 +478,6 @@ static ssize_t name##_store(struct gfs2_sbd *sdp, const char *buf, size_t len)\
 }                                                                             \
 TUNE_ATTR_2(name, name##_store)
 
-#define TUNE_ATTR_DAEMON(name, process)                                       \
-static ssize_t name##_store(struct gfs2_sbd *sdp, const char *buf, size_t len)\
-{                                                                             \
-	ssize_t r = tune_set(sdp, &sdp->sd_tune.gt_##name, 1, buf, len);      \
-	wake_up_process(sdp->sd_##process);                                   \
-	return r;                                                             \
-}                                                                             \
-TUNE_ATTR_2(name, name##_store)
-
 TUNE_ATTR(incore_log_blocks, 0);
 TUNE_ATTR(log_flush_secs, 0);
 TUNE_ATTR(quota_warn_period, 0);
@@ -574,8 +489,6 @@ TUNE_ATTR(new_files_jdata, 0);
 TUNE_ATTR(quota_simul_sync, 1);
 TUNE_ATTR(stall_secs, 1);
 TUNE_ATTR(statfs_quantum, 1);
-TUNE_ATTR_DAEMON(recoverd_secs, recoverd_process);
-TUNE_ATTR_DAEMON(logd_secs, logd_process);
 TUNE_ATTR_3(quota_scale, quota_scale_show, quota_scale_store);
 
 static struct attribute *tune_attrs[] = {
@@ -589,23 +502,11 @@ static struct attribute *tune_attrs[] = {
 	&tune_attr_quota_simul_sync.attr,
 	&tune_attr_stall_secs.attr,
 	&tune_attr_statfs_quantum.attr,
-	&tune_attr_recoverd_secs.attr,
-	&tune_attr_logd_secs.attr,
 	&tune_attr_quota_scale.attr,
 	&tune_attr_new_files_jdata.attr,
 	NULL,
 };
 
-static struct attribute_group lockstruct_group = {
-	.name = "lockstruct",
-	.attrs = lockstruct_attrs,
-};
-
-static struct attribute_group args_group = {
-	.name = "args",
-	.attrs = args_attrs,
-};
-
 static struct attribute_group tune_group = {
 	.name = "tune",
 	.attrs = tune_attrs,
@@ -626,17 +527,9 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
 	if (error)
 		goto fail;
 
-	error = sysfs_create_group(&sdp->sd_kobj, &lockstruct_group);
-	if (error)
-		goto fail_reg;
-
-	error = sysfs_create_group(&sdp->sd_kobj, &args_group);
-	if (error)
-		goto fail_lockstruct;
-
 	error = sysfs_create_group(&sdp->sd_kobj, &tune_group);
 	if (error)
-		goto fail_args;
+		goto fail_reg;
 
 	error = sysfs_create_group(&sdp->sd_kobj, &lock_module_group);
 	if (error)
@@ -647,10 +540,6 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
 
 fail_tune:
 	sysfs_remove_group(&sdp->sd_kobj, &tune_group);
-fail_args:
-	sysfs_remove_group(&sdp->sd_kobj, &args_group);
-fail_lockstruct:
-	sysfs_remove_group(&sdp->sd_kobj, &lockstruct_group);
 fail_reg:
 	kobject_put(&sdp->sd_kobj);
 fail:
@@ -661,8 +550,6 @@ fail:
 void gfs2_sys_fs_del(struct gfs2_sbd *sdp)
 {
 	sysfs_remove_group(&sdp->sd_kobj, &tune_group);
-	sysfs_remove_group(&sdp->sd_kobj, &args_group);
-	sysfs_remove_group(&sdp->sd_kobj, &lockstruct_group);
 	sysfs_remove_group(&sdp->sd_kobj, &lock_module_group);
 	kobject_put(&sdp->sd_kobj);
 }
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
new file mode 100644
index 00000000000..98d6ef1c1dc
--- /dev/null
+++ b/fs/gfs2/trace_gfs2.h
@@ -0,0 +1,407 @@
+#if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_GFS2_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+#define TRACE_INCLUDE_FILE trace_gfs2
+
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <linux/dlmconstants.h>
+#include <linux/gfs2_ondisk.h>
+#include "incore.h"
+#include "glock.h"
+
+#define dlm_state_name(nn) { DLM_LOCK_##nn, #nn }
+#define glock_trace_name(x) __print_symbolic(x,		\
+			    dlm_state_name(IV),		\
+			    dlm_state_name(NL),		\
+			    dlm_state_name(CR),		\
+			    dlm_state_name(CW),		\
+			    dlm_state_name(PR),		\
+			    dlm_state_name(PW),		\
+			    dlm_state_name(EX))
+
+#define block_state_name(x) __print_symbolic(x,			\
+			    { GFS2_BLKST_FREE, "free" },	\
+			    { GFS2_BLKST_USED, "used" },	\
+			    { GFS2_BLKST_DINODE, "dinode" },	\
+			    { GFS2_BLKST_UNLINKED, "unlinked" })
+
+#define show_glock_flags(flags) __print_flags(flags, "",	\
+	{(1UL << GLF_LOCK),			"l" },		\
+	{(1UL << GLF_DEMOTE),			"D" },		\
+	{(1UL << GLF_PENDING_DEMOTE),		"d" },		\
+	{(1UL << GLF_DEMOTE_IN_PROGRESS),	"p" },		\
+	{(1UL << GLF_DIRTY),			"y" },		\
+	{(1UL << GLF_LFLUSH),			"f" },		\
+	{(1UL << GLF_INVALIDATE_IN_PROGRESS),	"i" },		\
+	{(1UL << GLF_REPLY_PENDING),		"r" },		\
+	{(1UL << GLF_INITIAL),			"I" },		\
+	{(1UL << GLF_FROZEN),			"F" })
+
+#ifndef NUMPTY
+#define NUMPTY
+static inline u8 glock_trace_state(unsigned int state)
+{
+	switch(state) {
+	case LM_ST_SHARED:
+		return DLM_LOCK_PR;
+	case LM_ST_DEFERRED:
+		return DLM_LOCK_CW;
+	case LM_ST_EXCLUSIVE:
+		return DLM_LOCK_EX;
+	}
+	return DLM_LOCK_NL;
+}
+#endif
+
+/* Section 1 - Locking
+ *
+ * Objectives:
+ * Latency: Remote demote request to state change
+ * Latency: Local lock request to state change
+ * Latency: State change to lock grant
+ * Correctness: Ordering of local lock state vs. I/O requests
+ * Correctness: Responses to remote demote requests
+ */
+
+/* General glock state change (DLM lock request completes) */
+TRACE_EVENT(gfs2_glock_state_change,
+
+	TP_PROTO(const struct gfs2_glock *gl, unsigned int new_state),
+
+	TP_ARGS(gl, new_state),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	u8,	new_state		)
+		__field(	u8,	dmt_state		)
+		__field(	u8,	tgt_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->new_state	= glock_trace_state(new_state);
+		__entry->tgt_state	= glock_trace_state(gl->gl_target);
+		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld state %s to %s tgt:%s dmt:%s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		 (unsigned long long)__entry->glnum,
+		  glock_trace_name(__entry->cur_state),
+		  glock_trace_name(__entry->new_state),
+		  glock_trace_name(__entry->tgt_state),
+		  glock_trace_name(__entry->dmt_state),
+		  show_glock_flags(__entry->flags))
+);
+
+/* State change -> unlocked, glock is being deallocated */
+TRACE_EVENT(gfs2_glock_put,
+
+	TP_PROTO(const struct gfs2_glock *gl),
+
+	TP_ARGS(gl),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld state %s => %s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+                  __entry->gltype, (unsigned long long)__entry->glnum,
+                  glock_trace_name(__entry->cur_state),
+		  glock_trace_name(DLM_LOCK_IV),
+		  show_glock_flags(__entry->flags))
+
+);
+
+/* Callback (local or remote) requesting lock demotion */
+TRACE_EVENT(gfs2_demote_rq,
+
+	TP_PROTO(const struct gfs2_glock *gl),
+
+	TP_ARGS(gl),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	u8,	cur_state		)
+		__field(	u8,	dmt_state		)
+		__field(	unsigned long,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= gl->gl_sbd->sd_vfs->s_dev;
+		__entry->gltype		= gl->gl_name.ln_type;
+		__entry->glnum		= gl->gl_name.ln_number;
+		__entry->cur_state	= glock_trace_state(gl->gl_state);
+		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
+		__entry->flags		= gl->gl_flags;
+	),
+
+	TP_printk("%u,%u glock %d:%lld demote %s to %s flags:%s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+                  glock_trace_name(__entry->cur_state),
+                  glock_trace_name(__entry->dmt_state),
+		  show_glock_flags(__entry->flags))
+
+);
+
+/* Promotion/grant of a glock */
+TRACE_EVENT(gfs2_promote,
+
+	TP_PROTO(const struct gfs2_holder *gh, int first),
+
+	TP_ARGS(gh, first),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	int,	first			)
+		__field(	u8,	state			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= gh->gh_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum	= gh->gh_gl->gl_name.ln_number;
+		__entry->gltype	= gh->gh_gl->gl_name.ln_type;
+		__entry->first	= first;
+		__entry->state	= glock_trace_state(gh->gh_state);
+	),
+
+	TP_printk("%u,%u glock %u:%llu promote %s %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+		  __entry->first ? "first": "other",
+		  glock_trace_name(__entry->state))
+);
+
+/* Queue/dequeue a lock request */
+TRACE_EVENT(gfs2_glock_queue,
+
+	TP_PROTO(const struct gfs2_holder *gh, int queue),
+
+	TP_ARGS(gh, queue),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	glnum			)
+		__field(	u32,	gltype			)
+		__field(	int,	queue			)
+		__field(	u8,	state			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= gh->gh_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->glnum	= gh->gh_gl->gl_name.ln_number;
+		__entry->gltype	= gh->gh_gl->gl_name.ln_type;
+		__entry->queue	= queue;
+		__entry->state	= glock_trace_state(gh->gh_state);
+	),
+
+	TP_printk("%u,%u glock %u:%llu %squeue %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->gltype,
+		  (unsigned long long)__entry->glnum,
+		  __entry->queue ? "" : "de",
+		  glock_trace_name(__entry->state))
+);
+
+/* Section 2 - Log/journal
+ *
+ * Objectives:
+ * Latency: Log flush time
+ * Correctness: pin/unpin vs. disk I/O ordering
+ * Performance: Log usage stats
+ */
+
+/* Pin/unpin a block in the log */
+TRACE_EVENT(gfs2_pin,
+
+	TP_PROTO(const struct gfs2_bufdata *bd, int pin),
+
+	TP_ARGS(bd, pin),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	pin			)
+		__field(	u32,	len			)
+		__field(	sector_t,	block		)
+		__field(	u64,	ino			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bd->bd_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->pin		= pin;
+		__entry->len		= bd->bd_bh->b_size;
+		__entry->block		= bd->bd_bh->b_blocknr;
+		__entry->ino		= bd->bd_gl->gl_name.ln_number;
+	),
+
+	TP_printk("%u,%u log %s %llu/%lu inode %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->pin ? "pin" : "unpin",
+		  (unsigned long long)__entry->block,
+		  (unsigned long)__entry->len,
+		  (unsigned long long)__entry->ino)
+);
+
+/* Flushing the log */
+TRACE_EVENT(gfs2_log_flush,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, int start),
+
+	TP_ARGS(sdp, start),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	start			)
+		__field(	u64,	log_seq			)
+	),
+
+	TP_fast_assign(
+		__entry->dev            = sdp->sd_vfs->s_dev;
+		__entry->start		= start;
+		__entry->log_seq	= sdp->sd_log_sequence;
+	),
+
+	TP_printk("%u,%u log flush %s %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->start ? "start" : "end",
+		  (unsigned long long)__entry->log_seq)
+);
+
+/* Reserving/releasing blocks in the log */
+TRACE_EVENT(gfs2_log_blocks,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, int blocks),
+
+	TP_ARGS(sdp, blocks),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	int,	blocks			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sdp->sd_vfs->s_dev;
+		__entry->blocks		= blocks;
+	),
+
+	TP_printk("%u,%u log reserve %d", MAJOR(__entry->dev),
+		  MINOR(__entry->dev), __entry->blocks)
+);
+
+/* Section 3 - bmap
+ *
+ * Objectives:
+ * Latency: Bmap request time
+ * Performance: Block allocator tracing
+ * Correctness: Test of disard generation vs. blocks allocated
+ */
+
+/* Map an extent of blocks, possibly a new allocation */
+TRACE_EVENT(gfs2_bmap,
+
+	TP_PROTO(const struct gfs2_inode *ip, const struct buffer_head *bh,
+		sector_t lblock, int create, int errno),
+
+	TP_ARGS(ip, bh, lblock, create, errno),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	sector_t, lblock		)
+		__field(	sector_t, pblock		)
+		__field(	u64,	inum			)
+		__field(	unsigned long, state		)
+		__field(	u32,	len			)
+		__field(	int,	create			)
+		__field(	int,	errno			)
+	),
+
+	TP_fast_assign(
+		__entry->dev            = ip->i_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->lblock		= lblock;
+		__entry->pblock		= buffer_mapped(bh) ?  bh->b_blocknr : 0;
+		__entry->inum		= ip->i_no_addr;
+		__entry->state		= bh->b_state;
+		__entry->len		= bh->b_size;
+		__entry->create		= create;
+		__entry->errno		= errno;
+	),
+
+	TP_printk("%u,%u bmap %llu map %llu/%lu to %llu flags:%08lx %s %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long long)__entry->inum,
+		  (unsigned long long)__entry->lblock,
+		  (unsigned long)__entry->len,
+		  (unsigned long long)__entry->pblock,
+		  __entry->state, __entry->create ? "create " : "nocreate",
+		  __entry->errno)
+);
+
+/* Keep track of blocks as they are allocated/freed */
+TRACE_EVENT(gfs2_block_alloc,
+
+	TP_PROTO(const struct gfs2_inode *ip, u64 block, unsigned len,
+		u8 block_state),
+
+	TP_ARGS(ip, block, len, block_state),
+
+	TP_STRUCT__entry(
+		__field(        dev_t,  dev                     )
+		__field(	u64,	start			)
+		__field(	u64,	inum			)
+		__field(	u32,	len			)
+		__field(	u8,	block_state		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ip->i_gl->gl_sbd->sd_vfs->s_dev;
+		__entry->start		= block;
+		__entry->inum		= ip->i_no_addr;
+		__entry->len		= len;
+		__entry->block_state	= block_state;
+	),
+
+	TP_printk("%u,%u bmap %llu alloc %llu/%lu %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long long)__entry->inum,
+		  (unsigned long long)__entry->start,
+		  (unsigned long)__entry->len,
+		  block_state_name(__entry->block_state))
+);
+
+#endif /* _TRACE_GFS2_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
+
diff --git a/fs/gfs2/trans.c b/fs/gfs2/trans.c
index 053752d4b27..4ef0e9fa354 100644
--- a/fs/gfs2/trans.c
+++ b/fs/gfs2/trans.c
@@ -33,6 +33,9 @@ int gfs2_trans_begin(struct gfs2_sbd *sdp, unsigned int blocks,
 	BUG_ON(current->journal_info);
 	BUG_ON(blocks == 0 && revokes == 0);
 
+	if (!test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags))
+		return -EROFS;
+
 	tr = kzalloc(sizeof(struct gfs2_trans), GFP_NOFS);
 	if (!tr)
 		return -ENOMEM;
@@ -54,12 +57,6 @@ int gfs2_trans_begin(struct gfs2_sbd *sdp, unsigned int blocks,
 	if (error)
 		goto fail_holder_uninit;
 
-	if (!test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
-		tr->tr_t_gh.gh_flags |= GL_NOCACHE;
-		error = -EROFS;
-		goto fail_gunlock;
-	}
-
 	error = gfs2_log_reserve(sdp, tr->tr_reserved);
 	if (error)
 		goto fail_gunlock;
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index a36bb749926..6f833dc8e91 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -49,11 +49,23 @@ MODULE_LICENSE("GPL");
  */
 static void hfs_write_super(struct super_block *sb)
 {
+	lock_super(sb);
 	sb->s_dirt = 0;
-	if (sb->s_flags & MS_RDONLY)
-		return;
+
 	/* sync everything to the buffers */
+	if (!(sb->s_flags & MS_RDONLY))
+		hfs_mdb_commit(sb);
+	unlock_super(sb);
+}
+
+static int hfs_sync_fs(struct super_block *sb, int wait)
+{
+	lock_super(sb);
 	hfs_mdb_commit(sb);
+	sb->s_dirt = 0;
+	unlock_super(sb);
+
+	return 0;
 }
 
 /*
@@ -65,9 +77,15 @@ static void hfs_write_super(struct super_block *sb)
  */
 static void hfs_put_super(struct super_block *sb)
 {
+	lock_kernel();
+
+	if (sb->s_dirt)
+		hfs_write_super(sb);
 	hfs_mdb_close(sb);
 	/* release the MDB's resources */
 	hfs_mdb_put(sb);
+
+	unlock_kernel();
 }
 
 /*
@@ -164,6 +182,7 @@ static const struct super_operations hfs_super_operations = {
 	.clear_inode	= hfs_clear_inode,
 	.put_super	= hfs_put_super,
 	.write_super	= hfs_write_super,
+	.sync_fs	= hfs_sync_fs,
 	.statfs		= hfs_statfs,
 	.remount_fs     = hfs_remount,
 	.show_options	= hfs_show_options,
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index f2a64020f42..9fc3af0c0da 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -152,15 +152,14 @@ static void hfsplus_clear_inode(struct inode *inode)
 	}
 }
 
-static void hfsplus_write_super(struct super_block *sb)
+static int hfsplus_sync_fs(struct super_block *sb, int wait)
 {
 	struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
 
 	dprint(DBG_SUPER, "hfsplus_write_super\n");
+
+	lock_super(sb);
 	sb->s_dirt = 0;
-	if (sb->s_flags & MS_RDONLY)
-		/* warn? */
-		return;
 
 	vhdr->free_blocks = cpu_to_be32(HFSPLUS_SB(sb).free_blocks);
 	vhdr->next_alloc = cpu_to_be32(HFSPLUS_SB(sb).next_alloc);
@@ -192,6 +191,16 @@ static void hfsplus_write_super(struct super_block *sb)
 		}
 		HFSPLUS_SB(sb).flags &= ~HFSPLUS_SB_WRITEBACKUP;
 	}
+	unlock_super(sb);
+	return 0;
+}
+
+static void hfsplus_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		hfsplus_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static void hfsplus_put_super(struct super_block *sb)
@@ -199,6 +208,11 @@ static void hfsplus_put_super(struct super_block *sb)
 	dprint(DBG_SUPER, "hfsplus_put_super\n");
 	if (!sb->s_fs_info)
 		return;
+
+	lock_kernel();
+
+	if (sb->s_dirt)
+		hfsplus_write_super(sb);
 	if (!(sb->s_flags & MS_RDONLY) && HFSPLUS_SB(sb).s_vhdr) {
 		struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
 
@@ -218,6 +232,8 @@ static void hfsplus_put_super(struct super_block *sb)
 		unload_nls(HFSPLUS_SB(sb).nls);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int hfsplus_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -279,6 +295,7 @@ static const struct super_operations hfsplus_sops = {
 	.clear_inode	= hfsplus_clear_inode,
 	.put_super	= hfsplus_put_super,
 	.write_super	= hfsplus_write_super,
+	.sync_fs	= hfsplus_sync_fs,
 	.statfs		= hfsplus_statfs,
 	.remount_fs	= hfsplus_remount,
 	.show_options	= hfsplus_show_options,
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index fc77965be84..f2feaa06bf2 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -13,6 +13,7 @@
 #include <linux/statfs.h>
 #include <linux/magic.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 
 /* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
 
@@ -99,11 +100,16 @@ int hpfs_stop_cycles(struct super_block *s, int key, int *c1, int *c2,
 static void hpfs_put_super(struct super_block *s)
 {
 	struct hpfs_sb_info *sbi = hpfs_sb(s);
+
+	lock_kernel();
+
 	kfree(sbi->sb_cp_table);
 	kfree(sbi->sb_bmp_dir);
 	unmark_dirty(s);
 	s->s_fs_info = NULL;
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 unsigned hpfs_count_one_bitmap(struct super_block *s, secno secno)
@@ -393,6 +399,8 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 	
 	*flags |= MS_NOATIME;
 	
+	lock_kernel();
+	lock_super(s);
 	uid = sbi->sb_uid; gid = sbi->sb_gid;
 	umask = 0777 & ~sbi->sb_mode;
 	lowercase = sbi->sb_lowercase; conv = sbi->sb_conv;
@@ -425,9 +433,13 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 
 	replace_mount_options(s, new_opts);
 
+	unlock_super(s);
+	unlock_kernel();
 	return 0;
 
 out_err:
+	unlock_super(s);
+	unlock_kernel();
 	kfree(new_opts);
 	return -EINVAL;
 }
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index c1462d43e72..941c8425c10 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -30,6 +30,7 @@
 #include <linux/dnotify.h>
 #include <linux/statfs.h>
 #include <linux/security.h>
+#include <linux/ima.h>
 
 #include <asm/uaccess.h>
 
@@ -986,6 +987,7 @@ struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
 			&hugetlbfs_file_operations);
 	if (!file)
 		goto out_dentry; /* inode is already attached */
+	ima_counts_get(file);
 
 	return file;
 
diff --git a/fs/inode.c b/fs/inode.c
index 0571983755d..f643be565df 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -22,6 +22,7 @@
 #include <linux/cdev.h>
 #include <linux/bootmem.h>
 #include <linux/inotify.h>
+#include <linux/fsnotify.h>
 #include <linux/mount.h>
 #include <linux/async.h>
 
@@ -189,6 +190,10 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
 	inode->i_private = NULL;
 	inode->i_mapping = mapping;
 
+#ifdef CONFIG_FSNOTIFY
+	inode->i_fsnotify_mask = 0;
+#endif
+
 	return inode;
 
 out_free_security:
@@ -219,7 +224,9 @@ static struct inode *alloc_inode(struct super_block *sb)
 void destroy_inode(struct inode *inode)
 {
 	BUG_ON(inode_has_buffers(inode));
+	ima_inode_free(inode);
 	security_inode_free(inode);
+	fsnotify_inode_delete(inode);
 	if (inode->i_sb->s_op->destroy_inode)
 		inode->i_sb->s_op->destroy_inode(inode);
 	else
@@ -251,6 +258,9 @@ void inode_init_once(struct inode *inode)
 	INIT_LIST_HEAD(&inode->inotify_watches);
 	mutex_init(&inode->inotify_mutex);
 #endif
+#ifdef CONFIG_FSNOTIFY
+	INIT_HLIST_HEAD(&inode->i_fsnotify_mark_entries);
+#endif
 }
 EXPORT_SYMBOL(inode_init_once);
 
@@ -397,6 +407,7 @@ int invalidate_inodes(struct super_block *sb)
 	mutex_lock(&iprune_mutex);
 	spin_lock(&inode_lock);
 	inotify_unmount_inodes(&sb->s_inodes);
+	fsnotify_unmount_inodes(&sb->s_inodes);
 	busy = invalidate_list(&sb->s_inodes, &throw_away);
 	spin_unlock(&inode_lock);
 
@@ -1053,13 +1064,22 @@ int insert_inode_locked(struct inode *inode)
 	struct super_block *sb = inode->i_sb;
 	ino_t ino = inode->i_ino;
 	struct hlist_head *head = inode_hashtable + hash(sb, ino);
-	struct inode *old;
 
 	inode->i_state |= I_LOCK|I_NEW;
 	while (1) {
+		struct hlist_node *node;
+		struct inode *old = NULL;
 		spin_lock(&inode_lock);
-		old = find_inode_fast(sb, head, ino);
-		if (likely(!old)) {
+		hlist_for_each_entry(old, node, head, i_hash) {
+			if (old->i_ino != ino)
+				continue;
+			if (old->i_sb != sb)
+				continue;
+			if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+				continue;
+			break;
+		}
+		if (likely(!node)) {
 			hlist_add_head(&inode->i_hash, head);
 			spin_unlock(&inode_lock);
 			return 0;
@@ -1081,14 +1101,24 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval,
 {
 	struct super_block *sb = inode->i_sb;
 	struct hlist_head *head = inode_hashtable + hash(sb, hashval);
-	struct inode *old;
 
 	inode->i_state |= I_LOCK|I_NEW;
 
 	while (1) {
+		struct hlist_node *node;
+		struct inode *old = NULL;
+
 		spin_lock(&inode_lock);
-		old = find_inode(sb, head, test, data);
-		if (likely(!old)) {
+		hlist_for_each_entry(old, node, head, i_hash) {
+			if (old->i_sb != sb)
+				continue;
+			if (!test(old, data))
+				continue;
+			if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+				continue;
+			break;
+		}
+		if (likely(!node)) {
 			hlist_add_head(&inode->i_hash, head);
 			spin_unlock(&inode_lock);
 			return 0;
@@ -1378,7 +1408,7 @@ EXPORT_SYMBOL(touch_atime);
  *	for writeback.  Note that this function is meant exclusively for
  *	usage in the file write path of filesystems, and filesystems may
  *	choose to explicitly ignore update via this function with the
- *	S_NOCTIME inode flag, e.g. for network filesystem where these
+ *	S_NOCMTIME inode flag, e.g. for network filesystem where these
  *	timestamps are handled by the server.
  */
 
@@ -1392,7 +1422,7 @@ void file_update_time(struct file *file)
 	if (IS_NOCMTIME(inode))
 		return;
 
-	err = mnt_want_write(file->f_path.mnt);
+	err = mnt_want_write_file(file);
 	if (err)
 		return;
 
diff --git a/fs/internal.h b/fs/internal.h
index b4dac4fb6b6..d55ef562f0b 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -25,6 +25,8 @@ static inline int sb_is_blkdev_sb(struct super_block *sb)
 	return sb == blockdev_superblock;
 }
 
+extern int __sync_blockdev(struct block_device *bdev, int wait);
+
 #else
 static inline void bdev_cache_init(void)
 {
@@ -34,6 +36,11 @@ static inline int sb_is_blkdev_sb(struct super_block *sb)
 {
 	return 0;
 }
+
+static inline int __sync_blockdev(struct block_device *bdev, int wait)
+{
+	return 0;
+}
 #endif
 
 /*
@@ -66,3 +73,13 @@ extern void __init mnt_init(void);
  * fs_struct.c
  */
 extern void chroot_fs_refs(struct path *, struct path *);
+
+/*
+ * file_table.c
+ */
+extern void mark_files_ro(struct super_block *);
+
+/*
+ * super.c
+ */
+extern int do_remount_sb(struct super_block *, int, void *, int);
diff --git a/fs/ioctl.c b/fs/ioctl.c
index 82d9c42b8ba..286f38dfc6c 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -414,10 +414,6 @@ static int file_ioctl(struct file *filp, unsigned int cmd,
 	switch (cmd) {
 	case FIBMAP:
 		return ioctl_fibmap(filp, p);
-	case FS_IOC_FIEMAP:
-		return ioctl_fiemap(filp, arg);
-	case FIGETBSZ:
-		return put_user(inode->i_sb->s_blocksize, p);
 	case FIONREAD:
 		return put_user(i_size_read(inode) - filp->f_pos, p);
 	}
@@ -557,6 +553,16 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		error = ioctl_fsthaw(filp);
 		break;
 
+	case FS_IOC_FIEMAP:
+		return ioctl_fiemap(filp, arg);
+
+	case FIGETBSZ:
+	{
+		struct inode *inode = filp->f_path.dentry->d_inode;
+		int __user *p = (int __user *)arg;
+		return put_user(inode->i_sb->s_blocksize, p);
+	}
+
 	default:
 		if (S_ISREG(filp->f_path.dentry->d_inode->i_mode))
 			error = file_ioctl(filp, cmd, arg);
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index b4cbe9603c7..068b34b5a10 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -42,11 +42,16 @@ static int isofs_dentry_cmp_ms(struct dentry *dentry, struct qstr *a, struct qst
 static void isofs_put_super(struct super_block *sb)
 {
 	struct isofs_sb_info *sbi = ISOFS_SB(sb);
+
 #ifdef CONFIG_JOLIET
+	lock_kernel();
+
 	if (sbi->s_nls_iocharset) {
 		unload_nls(sbi->s_nls_iocharset);
 		sbi->s_nls_iocharset = NULL;
 	}
+
+	unlock_kernel();
 #endif
 
 	kfree(sbi);
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 06560c520f4..618e21c0b7a 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -241,7 +241,7 @@ write_out_data:
 			spin_lock(&journal->j_list_lock);
 		}
 		/* Someone already cleaned up the buffer? */
-		if (!buffer_jbd(bh)
+		if (!buffer_jbd(bh) || bh2jh(bh) != jh
 			|| jh->b_transaction != commit_transaction
 			|| jh->b_jlist != BJ_SyncData) {
 			jbd_unlock_bh_state(bh);
@@ -478,7 +478,9 @@ void journal_commit_transaction(journal_t *journal)
 			spin_lock(&journal->j_list_lock);
 			continue;
 		}
-		if (buffer_jbd(bh) && jh->b_jlist == BJ_Locked) {
+		if (buffer_jbd(bh) && bh2jh(bh) == jh &&
+		    jh->b_transaction == commit_transaction &&
+		    jh->b_jlist == BJ_Locked) {
 			__journal_unfile_buffer(jh);
 			jbd_unlock_bh_state(bh);
 			journal_remove_journal_head(bh);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 58144102bf2..62be7d294ec 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1781,7 +1781,7 @@ int jbd2_journal_wipe(journal_t *journal, int write)
  * Journal abort has very specific semantics, which we describe
  * for journal abort.
  *
- * Two internal function, which provide abort to te jbd layer
+ * Two internal functions, which provide abort to the jbd layer
  * itself are here.
  */
 
@@ -1879,7 +1879,7 @@ void jbd2_journal_abort(journal_t *journal, int errno)
  * int jbd2_journal_errno () - returns the journal's error state.
  * @journal: journal to examine.
  *
- * This is the errno numbet set with jbd2_journal_abort(), the last
+ * This is the errno number set with jbd2_journal_abort(), the last
  * time the journal was mounted - if the journal was stopped
  * without calling abort this will be 0.
  *
@@ -1903,7 +1903,7 @@ int jbd2_journal_errno(journal_t *journal)
  * int jbd2_journal_clear_err () - clears the journal's error state
  * @journal: journal to act on.
  *
- * An error must be cleared or Acked to take a FS out of readonly
+ * An error must be cleared or acked to take a FS out of readonly
  * mode.
  */
 int jbd2_journal_clear_err(journal_t *journal)
@@ -1923,7 +1923,7 @@ int jbd2_journal_clear_err(journal_t *journal)
  * void jbd2_journal_ack_err() - Ack journal err.
  * @journal: journal to act on.
  *
- * An error must be cleared or Acked to take a FS out of readonly
+ * An error must be cleared or acked to take a FS out of readonly
  * mode.
  */
 void jbd2_journal_ack_err(journal_t *journal)
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index c32b4a1ad6c..a0244740b75 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -480,13 +480,6 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
 	return;
 
 filebad:
-	mutex_lock(&c->erase_free_sem);
-	spin_lock(&c->erase_completion_lock);
-	/* Stick it on a list (any list) so erase_failed can take it
-	   right off again.  Silly, but shouldn't happen often. */
-	list_move(&jeb->list, &c->erasing_list);
-	spin_unlock(&c->erase_completion_lock);
-	mutex_unlock(&c->erase_free_sem);
 	jffs2_erase_failed(c, jeb, bad_offset);
 	return;
 
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 249305d65d5..3451a81b214 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -20,6 +20,7 @@
 #include <linux/vmalloc.h>
 #include <linux/vfs.h>
 #include <linux/crc32.h>
+#include <linux/smp_lock.h>
 #include "nodelist.h"
 
 static int jffs2_flash_setup(struct jffs2_sb_info *c);
@@ -387,6 +388,7 @@ int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
 	   This also catches the case where it was stopped and this
 	   is just a remount to restart it.
 	   Flush the writebuffer, if neccecary, else we loose it */
+	lock_kernel();
 	if (!(sb->s_flags & MS_RDONLY)) {
 		jffs2_stop_garbage_collect_thread(c);
 		mutex_lock(&c->alloc_sem);
@@ -399,24 +401,10 @@ int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
 
 	*flags |= MS_NOATIME;
 
+	unlock_kernel();
 	return 0;
 }
 
-void jffs2_write_super (struct super_block *sb)
-{
-	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
-	sb->s_dirt = 0;
-
-	if (sb->s_flags & MS_RDONLY)
-		return;
-
-	D1(printk(KERN_DEBUG "jffs2_write_super()\n"));
-	jffs2_garbage_collect_trigger(c);
-	jffs2_erase_pending_blocks(c, 0);
-	jffs2_flush_wbuf_gc(c, 0);
-}
-
-
 /* jffs2_new_inode: allocate a new inode and inocache, add it to the hash,
    fill in the raw_inode while you're at it. */
 struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_inode *ri)
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 5e194a5c8e2..2228380c47b 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -181,7 +181,6 @@ void jffs2_dirty_inode(struct inode *inode);
 struct inode *jffs2_new_inode (struct inode *dir_i, int mode,
 			       struct jffs2_raw_inode *ri);
 int jffs2_statfs (struct dentry *, struct kstatfs *);
-void jffs2_write_super (struct super_block *);
 int jffs2_remount_fs (struct super_block *, int *, char *);
 int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
 void jffs2_gc_release_inode(struct jffs2_sb_info *c,
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 4c4e18c54a5..07a22caf268 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -53,10 +53,29 @@ static void jffs2_i_init_once(void *foo)
 	inode_init_once(&f->vfs_inode);
 }
 
+static void jffs2_write_super(struct super_block *sb)
+{
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
+
+	lock_super(sb);
+	sb->s_dirt = 0;
+
+	if (!(sb->s_flags & MS_RDONLY)) {
+		D1(printk(KERN_DEBUG "jffs2_write_super()\n"));
+		jffs2_garbage_collect_trigger(c);
+		jffs2_erase_pending_blocks(c, 0);
+		jffs2_flush_wbuf_gc(c, 0);
+	}
+
+	unlock_super(sb);
+}
+
 static int jffs2_sync_fs(struct super_block *sb, int wait)
 {
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
 
+	jffs2_write_super(sb);
+
 	mutex_lock(&c->alloc_sem);
 	jffs2_flush_wbuf_pad(c);
 	mutex_unlock(&c->alloc_sem);
@@ -174,6 +193,11 @@ static void jffs2_put_super (struct super_block *sb)
 
 	D2(printk(KERN_DEBUG "jffs2: jffs2_put_super()\n"));
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		jffs2_write_super(sb);
+
 	mutex_lock(&c->alloc_sem);
 	jffs2_flush_wbuf_pad(c);
 	mutex_unlock(&c->alloc_sem);
@@ -192,6 +216,8 @@ static void jffs2_put_super (struct super_block *sb)
 	if (c->mtd->sync)
 		c->mtd->sync(c->mtd);
 
+	unlock_kernel();
+
 	D1(printk(KERN_DEBUG "jffs2_put_super returning\n"));
 }
 
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 346057218ed..0fc30407f03 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -2571,6 +2571,7 @@ diNewIAG(struct inomap * imap, int *iagnop, int agno, struct metapage ** mpp)
 
 			txAbort(tid, 0);
 			txEnd(tid);
+			mutex_unlock(&JFS_IP(ipimap)->commit_mutex);
 
 			/* release the inode map lock */
 			IWRITE_UNLOCK(ipimap);
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 6f21adf9479..09b1b6ee218 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -32,6 +32,7 @@
 #include <linux/crc32.h>
 #include <asm/uaccess.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 
 #include "jfs_incore.h"
 #include "jfs_filsys.h"
@@ -183,6 +184,9 @@ static void jfs_put_super(struct super_block *sb)
 	int rc;
 
 	jfs_info("In jfs_put_super");
+
+	lock_kernel();
+
 	rc = jfs_umount(sb);
 	if (rc)
 		jfs_err("jfs_umount failed with return code %d", rc);
@@ -195,6 +199,8 @@ static void jfs_put_super(struct super_block *sb)
 	sbi->direct_inode = NULL;
 
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 enum {
@@ -370,19 +376,24 @@ static int jfs_remount(struct super_block *sb, int *flags, char *data)
 	s64 newLVSize = 0;
 	int rc = 0;
 	int flag = JFS_SBI(sb)->flag;
+	int ret;
 
 	if (!parse_options(data, sb, &newLVSize, &flag)) {
 		return -EINVAL;
 	}
+	lock_kernel();
 	if (newLVSize) {
 		if (sb->s_flags & MS_RDONLY) {
 			printk(KERN_ERR
 		  "JFS: resize requires volume to be mounted read-write\n");
+			unlock_kernel();
 			return -EROFS;
 		}
 		rc = jfs_extendfs(sb, newLVSize, 0);
-		if (rc)
+		if (rc) {
+			unlock_kernel();
 			return rc;
+		}
 	}
 
 	if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
@@ -393,23 +404,31 @@ static int jfs_remount(struct super_block *sb, int *flags, char *data)
 		truncate_inode_pages(JFS_SBI(sb)->direct_inode->i_mapping, 0);
 
 		JFS_SBI(sb)->flag = flag;
-		return jfs_mount_rw(sb, 1);
+		ret = jfs_mount_rw(sb, 1);
+		unlock_kernel();
+		return ret;
 	}
 	if ((!(sb->s_flags & MS_RDONLY)) && (*flags & MS_RDONLY)) {
 		rc = jfs_umount_rw(sb);
 		JFS_SBI(sb)->flag = flag;
+		unlock_kernel();
 		return rc;
 	}
 	if ((JFS_SBI(sb)->flag & JFS_NOINTEGRITY) != (flag & JFS_NOINTEGRITY))
 		if (!(sb->s_flags & MS_RDONLY)) {
 			rc = jfs_umount_rw(sb);
-			if (rc)
+			if (rc) {
+				unlock_kernel();
 				return rc;
+			}
 			JFS_SBI(sb)->flag = flag;
-			return jfs_mount_rw(sb, 1);
+			ret = jfs_mount_rw(sb, 1);
+			unlock_kernel();
+			return ret;
 		}
 	JFS_SBI(sb)->flag = flag;
 
+	unlock_kernel();
 	return 0;
 }
 
@@ -720,8 +739,10 @@ static ssize_t jfs_quota_write(struct super_block *sb, int type,
 		blk++;
 	}
 out:
-	if (len == towrite)
+	if (len == towrite) {
+		mutex_unlock(&inode->i_mutex);
 		return err;
+	}
 	if (inode->i_size < off+len-towrite)
 		i_size_write(inode, off+len-towrite);
 	inode->i_version++;
diff --git a/fs/libfs.c b/fs/libfs.c
index 80046ddf506..ddfa89948c3 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -9,6 +9,8 @@
 #include <linux/vfs.h>
 #include <linux/mutex.h>
 #include <linux/exportfs.h>
+#include <linux/writeback.h>
+#include <linux/buffer_head.h>
 
 #include <asm/uaccess.h>
 
@@ -807,6 +809,29 @@ struct dentry *generic_fh_to_parent(struct super_block *sb, struct fid *fid,
 }
 EXPORT_SYMBOL_GPL(generic_fh_to_parent);
 
+int simple_fsync(struct file *file, struct dentry *dentry, int datasync)
+{
+	struct writeback_control wbc = {
+		.sync_mode = WB_SYNC_ALL,
+		.nr_to_write = 0, /* metadata-only; caller takes care of data */
+	};
+	struct inode *inode = dentry->d_inode;
+	int err;
+	int ret;
+
+	ret = sync_mapping_buffers(inode->i_mapping);
+	if (!(inode->i_state & I_DIRTY))
+		return ret;
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		return ret;
+
+	err = sync_inode(inode, &wbc);
+	if (ret == 0)
+		ret = err;
+	return ret;
+}
+EXPORT_SYMBOL(simple_fsync);
+
 EXPORT_SYMBOL(dcache_dir_close);
 EXPORT_SYMBOL(dcache_dir_lseek);
 EXPORT_SYMBOL(dcache_dir_open);
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index d4946c4c90e..e5f206467e4 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -22,7 +22,7 @@ static int minix_readdir(struct file *, void *, filldir_t);
 const struct file_operations minix_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= minix_readdir,
-	.fsync		= minix_sync_file,
+	.fsync		= simple_fsync,
 };
 
 static inline void dir_put_page(struct page *page)
diff --git a/fs/minix/file.c b/fs/minix/file.c
index 17765f697e5..3eec3e607a8 100644
--- a/fs/minix/file.c
+++ b/fs/minix/file.c
@@ -6,15 +6,12 @@
  *  minix regular file handling primitives
  */
 
-#include <linux/buffer_head.h>		/* for fsync_inode_buffers() */
 #include "minix.h"
 
 /*
  * We have mostly NULLs here: the current defaults are OK for
  * the minix filesystem.
  */
-int minix_sync_file(struct file *, struct dentry *, int);
-
 const struct file_operations minix_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
@@ -22,7 +19,7 @@ const struct file_operations minix_file_operations = {
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
 	.mmap		= generic_file_mmap,
-	.fsync		= minix_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -30,18 +27,3 @@ const struct inode_operations minix_file_inode_operations = {
 	.truncate	= minix_truncate,
 	.getattr	= minix_getattr,
 };
-
-int minix_sync_file(struct file * file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-	
-	err |= minix_sync_inode(inode);
-	return err ? -EIO : 0;
-}
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index daad3c2740d..f91a2369359 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -35,6 +35,8 @@ static void minix_put_super(struct super_block *sb)
 	int i;
 	struct minix_sb_info *sbi = minix_sb(sb);
 
+	lock_kernel();
+
 	if (!(sb->s_flags & MS_RDONLY)) {
 		if (sbi->s_version != MINIX_V3)	 /* s_state is now out from V3 sb */
 			sbi->s_ms->s_state = sbi->s_mount_state;
@@ -49,7 +51,7 @@ static void minix_put_super(struct super_block *sb)
 	sb->s_fs_info = NULL;
 	kfree(sbi);
 
-	return;
+	unlock_kernel();
 }
 
 static struct kmem_cache * minix_inode_cachep;
@@ -554,38 +556,25 @@ static struct buffer_head * V2_minix_update_inode(struct inode * inode)
 	return bh;
 }
 
-static struct buffer_head *minix_update_inode(struct inode *inode)
-{
-	if (INODE_VERSION(inode) == MINIX_V1)
-		return V1_minix_update_inode(inode);
-	else
-		return V2_minix_update_inode(inode);
-}
-
-static int minix_write_inode(struct inode * inode, int wait)
-{
-	brelse(minix_update_inode(inode));
-	return 0;
-}
-
-int minix_sync_inode(struct inode * inode)
+static int minix_write_inode(struct inode *inode, int wait)
 {
 	int err = 0;
 	struct buffer_head *bh;
 
-	bh = minix_update_inode(inode);
-	if (bh && buffer_dirty(bh))
-	{
+	if (INODE_VERSION(inode) == MINIX_V1)
+		bh = V1_minix_update_inode(inode);
+	else
+		bh = V2_minix_update_inode(inode);
+	if (!bh)
+		return -EIO;
+	if (wait && buffer_dirty(bh)) {
 		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh))
-		{
+		if (buffer_req(bh) && !buffer_uptodate(bh)) {
 			printk("IO error syncing minix inode [%s:%08lx]\n",
 				inode->i_sb->s_id, inode->i_ino);
-			err = -1;
+			err = -EIO;
 		}
 	}
-	else if (!bh)
-		err = -1;
 	brelse (bh);
 	return err;
 }
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index e6a0b193bea..cb7fdd11f9a 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -57,7 +57,6 @@ extern int __minix_write_begin(struct file *file, struct address_space *mapping,
 extern void V1_minix_truncate(struct inode *);
 extern void V2_minix_truncate(struct inode *);
 extern void minix_truncate(struct inode *);
-extern int minix_sync_inode(struct inode *);
 extern void minix_set_inode(struct inode *, dev_t);
 extern int V1_minix_get_block(struct inode *, long, struct buffer_head *, int);
 extern int V2_minix_get_block(struct inode *, long, struct buffer_head *, int);
@@ -72,7 +71,6 @@ extern int minix_empty_dir(struct inode*);
 extern void minix_set_link(struct minix_dir_entry*, struct page*, struct inode*);
 extern struct minix_dir_entry *minix_dotdot(struct inode*, struct page**);
 extern ino_t minix_inode_by_name(struct dentry*);
-extern int minix_sync_file(struct file *, struct dentry *, int);
 
 extern const struct inode_operations minix_file_inode_operations;
 extern const struct inode_operations minix_dir_inode_operations;
diff --git a/fs/mpage.c b/fs/mpage.c
index 680ba60863f..42381bd6543 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -379,7 +379,8 @@ mpage_readpages(struct address_space *mapping, struct list_head *pages,
 	struct buffer_head map_bh;
 	unsigned long first_logical_block = 0;
 
-	clear_buffer_mapped(&map_bh);
+	map_bh.b_state = 0;
+	map_bh.b_size = 0;
 	for (page_idx = 0; page_idx < nr_pages; page_idx++) {
 		struct page *page = list_entry(pages->prev, struct page, lru);
 
@@ -412,7 +413,8 @@ int mpage_readpage(struct page *page, get_block_t get_block)
 	struct buffer_head map_bh;
 	unsigned long first_logical_block = 0;
 
-	clear_buffer_mapped(&map_bh);
+	map_bh.b_state = 0;
+	map_bh.b_size = 0;
 	bio = do_mpage_readpage(bio, page, 1, &last_block_in_bio,
 			&map_bh, &first_logical_block, get_block);
 	if (bio)
diff --git a/fs/namei.c b/fs/namei.c
index 967c3db9272..527119afb6a 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -552,6 +552,17 @@ static __always_inline int link_path_walk(const char *name, struct nameidata *nd
 	return result;
 }
 
+static __always_inline void set_root(struct nameidata *nd)
+{
+	if (!nd->root.mnt) {
+		struct fs_struct *fs = current->fs;
+		read_lock(&fs->lock);
+		nd->root = fs->root;
+		path_get(&nd->root);
+		read_unlock(&fs->lock);
+	}
+}
+
 static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
 {
 	int res = 0;
@@ -560,14 +571,10 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 		goto fail;
 
 	if (*link == '/') {
-		struct fs_struct *fs = current->fs;
-
+		set_root(nd);
 		path_put(&nd->path);
-
-		read_lock(&fs->lock);
-		nd->path = fs->root;
-		path_get(&fs->root);
-		read_unlock(&fs->lock);
+		nd->path = nd->root;
+		path_get(&nd->root);
 	}
 
 	res = link_path_walk(link, nd);
@@ -668,23 +675,23 @@ loop:
 	return err;
 }
 
-int follow_up(struct vfsmount **mnt, struct dentry **dentry)
+int follow_up(struct path *path)
 {
 	struct vfsmount *parent;
 	struct dentry *mountpoint;
 	spin_lock(&vfsmount_lock);
-	parent=(*mnt)->mnt_parent;
-	if (parent == *mnt) {
+	parent = path->mnt->mnt_parent;
+	if (parent == path->mnt) {
 		spin_unlock(&vfsmount_lock);
 		return 0;
 	}
 	mntget(parent);
-	mountpoint=dget((*mnt)->mnt_mountpoint);
+	mountpoint = dget(path->mnt->mnt_mountpoint);
 	spin_unlock(&vfsmount_lock);
-	dput(*dentry);
-	*dentry = mountpoint;
-	mntput(*mnt);
-	*mnt = parent;
+	dput(path->dentry);
+	path->dentry = mountpoint;
+	mntput(path->mnt);
+	path->mnt = parent;
 	return 1;
 }
 
@@ -695,7 +702,7 @@ static int __follow_mount(struct path *path)
 {
 	int res = 0;
 	while (d_mountpoint(path->dentry)) {
-		struct vfsmount *mounted = lookup_mnt(path->mnt, path->dentry);
+		struct vfsmount *mounted = lookup_mnt(path);
 		if (!mounted)
 			break;
 		dput(path->dentry);
@@ -708,32 +715,32 @@ static int __follow_mount(struct path *path)
 	return res;
 }
 
-static void follow_mount(struct vfsmount **mnt, struct dentry **dentry)
+static void follow_mount(struct path *path)
 {
-	while (d_mountpoint(*dentry)) {
-		struct vfsmount *mounted = lookup_mnt(*mnt, *dentry);
+	while (d_mountpoint(path->dentry)) {
+		struct vfsmount *mounted = lookup_mnt(path);
 		if (!mounted)
 			break;
-		dput(*dentry);
-		mntput(*mnt);
-		*mnt = mounted;
-		*dentry = dget(mounted->mnt_root);
+		dput(path->dentry);
+		mntput(path->mnt);
+		path->mnt = mounted;
+		path->dentry = dget(mounted->mnt_root);
 	}
 }
 
 /* no need for dcache_lock, as serialization is taken care in
  * namespace.c
  */
-int follow_down(struct vfsmount **mnt, struct dentry **dentry)
+int follow_down(struct path *path)
 {
 	struct vfsmount *mounted;
 
-	mounted = lookup_mnt(*mnt, *dentry);
+	mounted = lookup_mnt(path);
 	if (mounted) {
-		dput(*dentry);
-		mntput(*mnt);
-		*mnt = mounted;
-		*dentry = dget(mounted->mnt_root);
+		dput(path->dentry);
+		mntput(path->mnt);
+		path->mnt = mounted;
+		path->dentry = dget(mounted->mnt_root);
 		return 1;
 	}
 	return 0;
@@ -741,19 +748,16 @@ int follow_down(struct vfsmount **mnt, struct dentry **dentry)
 
 static __always_inline void follow_dotdot(struct nameidata *nd)
 {
-	struct fs_struct *fs = current->fs;
+	set_root(nd);
 
 	while(1) {
 		struct vfsmount *parent;
 		struct dentry *old = nd->path.dentry;
 
-                read_lock(&fs->lock);
-		if (nd->path.dentry == fs->root.dentry &&
-		    nd->path.mnt == fs->root.mnt) {
-                        read_unlock(&fs->lock);
+		if (nd->path.dentry == nd->root.dentry &&
+		    nd->path.mnt == nd->root.mnt) {
 			break;
 		}
-                read_unlock(&fs->lock);
 		spin_lock(&dcache_lock);
 		if (nd->path.dentry != nd->path.mnt->mnt_root) {
 			nd->path.dentry = dget(nd->path.dentry->d_parent);
@@ -775,7 +779,7 @@ static __always_inline void follow_dotdot(struct nameidata *nd)
 		mntput(nd->path.mnt);
 		nd->path.mnt = parent;
 	}
-	follow_mount(&nd->path.mnt, &nd->path.dentry);
+	follow_mount(&nd->path);
 }
 
 /*
@@ -853,7 +857,8 @@ static int __link_path_walk(const char *name, struct nameidata *nd)
 			err = inode_permission(nd->path.dentry->d_inode,
 					       MAY_EXEC);
 		if (!err)
-			err = ima_path_check(&nd->path, MAY_EXEC);
+			err = ima_path_check(&nd->path, MAY_EXEC,
+				             IMA_COUNT_UPDATE);
  		if (err)
 			break;
 
@@ -1016,25 +1021,23 @@ static int path_walk(const char *name, struct nameidata *nd)
 	return link_path_walk(name, nd);
 }
 
-/* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
-static int do_path_lookup(int dfd, const char *name,
-				unsigned int flags, struct nameidata *nd)
+static int path_init(int dfd, const char *name, unsigned int flags, struct nameidata *nd)
 {
 	int retval = 0;
 	int fput_needed;
 	struct file *file;
-	struct fs_struct *fs = current->fs;
 
 	nd->last_type = LAST_ROOT; /* if there are only slashes... */
 	nd->flags = flags;
 	nd->depth = 0;
+	nd->root.mnt = NULL;
 
 	if (*name=='/') {
-		read_lock(&fs->lock);
-		nd->path = fs->root;
-		path_get(&fs->root);
-		read_unlock(&fs->lock);
+		set_root(nd);
+		nd->path = nd->root;
+		path_get(&nd->root);
 	} else if (dfd == AT_FDCWD) {
+		struct fs_struct *fs = current->fs;
 		read_lock(&fs->lock);
 		nd->path = fs->pwd;
 		path_get(&fs->pwd);
@@ -1062,17 +1065,29 @@ static int do_path_lookup(int dfd, const char *name,
 
 		fput_light(file, fput_needed);
 	}
+	return 0;
 
-	retval = path_walk(name, nd);
+fput_fail:
+	fput_light(file, fput_needed);
+out_fail:
+	return retval;
+}
+
+/* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
+static int do_path_lookup(int dfd, const char *name,
+				unsigned int flags, struct nameidata *nd)
+{
+	int retval = path_init(dfd, name, flags, nd);
+	if (!retval)
+		retval = path_walk(name, nd);
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
 				nd->path.dentry->d_inode))
 		audit_inode(name, nd->path.dentry);
-out_fail:
+	if (nd->root.mnt) {
+		path_put(&nd->root);
+		nd->root.mnt = NULL;
+	}
 	return retval;
-
-fput_fail:
-	fput_light(file, fput_needed);
-	goto out_fail;
 }
 
 int path_lookup(const char *name, unsigned int flags,
@@ -1112,14 +1127,18 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
 	nd->path.dentry = dentry;
 	nd->path.mnt = mnt;
 	path_get(&nd->path);
+	nd->root = nd->path;
+	path_get(&nd->root);
 
 	retval = path_walk(name, nd);
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
 				nd->path.dentry->d_inode))
 		audit_inode(name, nd->path.dentry);
 
-	return retval;
+	path_put(&nd->root);
+	nd->root.mnt = NULL;
 
+	return retval;
 }
 
 /**
@@ -1515,7 +1534,8 @@ int may_open(struct path *path, int acc_mode, int flag)
 		return error;
 
 	error = ima_path_check(path,
-			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
+			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC),
+			       IMA_COUNT_UPDATE);
 	if (error)
 		return error;
 	/*
@@ -1674,9 +1694,14 @@ struct file *do_filp_open(int dfd, const char *pathname,
 	/*
 	 * Create - we need to know the parent.
 	 */
-	error = do_path_lookup(dfd, pathname, LOOKUP_PARENT, &nd);
+	error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
 	if (error)
 		return ERR_PTR(error);
+	error = path_walk(pathname, &nd);
+	if (error)
+		return ERR_PTR(error);
+	if (unlikely(!audit_dummy_context()))
+		audit_inode(pathname, nd.path.dentry);
 
 	/*
 	 * We have the parent and last component. First of all, check
@@ -1804,6 +1829,8 @@ exit:
 	if (!IS_ERR(nd.intent.open.file))
 		release_open_intent(&nd);
 exit_parent:
+	if (nd.root.mnt)
+		path_put(&nd.root);
 	path_put(&nd.path);
 	return ERR_PTR(error);
 
diff --git a/fs/namespace.c b/fs/namespace.c
index 134d494158d..2dd333b0fe7 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -131,10 +131,20 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 		INIT_LIST_HEAD(&mnt->mnt_share);
 		INIT_LIST_HEAD(&mnt->mnt_slave_list);
 		INIT_LIST_HEAD(&mnt->mnt_slave);
-		atomic_set(&mnt->__mnt_writers, 0);
+#ifdef CONFIG_SMP
+		mnt->mnt_writers = alloc_percpu(int);
+		if (!mnt->mnt_writers)
+			goto out_free_devname;
+#else
+		mnt->mnt_writers = 0;
+#endif
 	}
 	return mnt;
 
+#ifdef CONFIG_SMP
+out_free_devname:
+	kfree(mnt->mnt_devname);
+#endif
 out_free_id:
 	mnt_free_id(mnt);
 out_free_cache:
@@ -171,65 +181,38 @@ int __mnt_is_readonly(struct vfsmount *mnt)
 }
 EXPORT_SYMBOL_GPL(__mnt_is_readonly);
 
-struct mnt_writer {
-	/*
-	 * If holding multiple instances of this lock, they
-	 * must be ordered by cpu number.
-	 */
-	spinlock_t lock;
-	struct lock_class_key lock_class; /* compiles out with !lockdep */
-	unsigned long count;
-	struct vfsmount *mnt;
-} ____cacheline_aligned_in_smp;
-static DEFINE_PER_CPU(struct mnt_writer, mnt_writers);
+static inline void inc_mnt_writers(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	(*per_cpu_ptr(mnt->mnt_writers, smp_processor_id()))++;
+#else
+	mnt->mnt_writers++;
+#endif
+}
 
-static int __init init_mnt_writers(void)
+static inline void dec_mnt_writers(struct vfsmount *mnt)
 {
-	int cpu;
-	for_each_possible_cpu(cpu) {
-		struct mnt_writer *writer = &per_cpu(mnt_writers, cpu);
-		spin_lock_init(&writer->lock);
-		lockdep_set_class(&writer->lock, &writer->lock_class);
-		writer->count = 0;
-	}
-	return 0;
+#ifdef CONFIG_SMP
+	(*per_cpu_ptr(mnt->mnt_writers, smp_processor_id()))--;
+#else
+	mnt->mnt_writers--;
+#endif
 }
-fs_initcall(init_mnt_writers);
 
-static void unlock_mnt_writers(void)
+static unsigned int count_mnt_writers(struct vfsmount *mnt)
 {
+#ifdef CONFIG_SMP
+	unsigned int count = 0;
 	int cpu;
-	struct mnt_writer *cpu_writer;
 
 	for_each_possible_cpu(cpu) {
-		cpu_writer = &per_cpu(mnt_writers, cpu);
-		spin_unlock(&cpu_writer->lock);
+		count += *per_cpu_ptr(mnt->mnt_writers, cpu);
 	}
-}
 
-static inline void __clear_mnt_count(struct mnt_writer *cpu_writer)
-{
-	if (!cpu_writer->mnt)
-		return;
-	/*
-	 * This is in case anyone ever leaves an invalid,
-	 * old ->mnt and a count of 0.
-	 */
-	if (!cpu_writer->count)
-		return;
-	atomic_add(cpu_writer->count, &cpu_writer->mnt->__mnt_writers);
-	cpu_writer->count = 0;
-}
- /*
- * must hold cpu_writer->lock
- */
-static inline void use_cpu_writer_for_mount(struct mnt_writer *cpu_writer,
-					  struct vfsmount *mnt)
-{
-	if (cpu_writer->mnt == mnt)
-		return;
-	__clear_mnt_count(cpu_writer);
-	cpu_writer->mnt = mnt;
+	return count;
+#else
+	return mnt->mnt_writers;
+#endif
 }
 
 /*
@@ -253,74 +236,73 @@ static inline void use_cpu_writer_for_mount(struct mnt_writer *cpu_writer,
 int mnt_want_write(struct vfsmount *mnt)
 {
 	int ret = 0;
-	struct mnt_writer *cpu_writer;
 
-	cpu_writer = &get_cpu_var(mnt_writers);
-	spin_lock(&cpu_writer->lock);
+	preempt_disable();
+	inc_mnt_writers(mnt);
+	/*
+	 * The store to inc_mnt_writers must be visible before we pass
+	 * MNT_WRITE_HOLD loop below, so that the slowpath can see our
+	 * incremented count after it has set MNT_WRITE_HOLD.
+	 */
+	smp_mb();
+	while (mnt->mnt_flags & MNT_WRITE_HOLD)
+		cpu_relax();
+	/*
+	 * After the slowpath clears MNT_WRITE_HOLD, mnt_is_readonly will
+	 * be set to match its requirements. So we must not load that until
+	 * MNT_WRITE_HOLD is cleared.
+	 */
+	smp_rmb();
 	if (__mnt_is_readonly(mnt)) {
+		dec_mnt_writers(mnt);
 		ret = -EROFS;
 		goto out;
 	}
-	use_cpu_writer_for_mount(cpu_writer, mnt);
-	cpu_writer->count++;
 out:
-	spin_unlock(&cpu_writer->lock);
-	put_cpu_var(mnt_writers);
+	preempt_enable();
 	return ret;
 }
 EXPORT_SYMBOL_GPL(mnt_want_write);
 
-static void lock_mnt_writers(void)
-{
-	int cpu;
-	struct mnt_writer *cpu_writer;
-
-	for_each_possible_cpu(cpu) {
-		cpu_writer = &per_cpu(mnt_writers, cpu);
-		spin_lock(&cpu_writer->lock);
-		__clear_mnt_count(cpu_writer);
-		cpu_writer->mnt = NULL;
-	}
+/**
+ * mnt_clone_write - get write access to a mount
+ * @mnt: the mount on which to take a write
+ *
+ * This is effectively like mnt_want_write, except
+ * it must only be used to take an extra write reference
+ * on a mountpoint that we already know has a write reference
+ * on it. This allows some optimisation.
+ *
+ * After finished, mnt_drop_write must be called as usual to
+ * drop the reference.
+ */
+int mnt_clone_write(struct vfsmount *mnt)
+{
+	/* superblock may be r/o */
+	if (__mnt_is_readonly(mnt))
+		return -EROFS;
+	preempt_disable();
+	inc_mnt_writers(mnt);
+	preempt_enable();
+	return 0;
 }
+EXPORT_SYMBOL_GPL(mnt_clone_write);
 
-/*
- * These per-cpu write counts are not guaranteed to have
- * matched increments and decrements on any given cpu.
- * A file open()ed for write on one cpu and close()d on
- * another cpu will imbalance this count.  Make sure it
- * does not get too far out of whack.
+/**
+ * mnt_want_write_file - get write access to a file's mount
+ * @file: the file who's mount on which to take a write
+ *
+ * This is like mnt_want_write, but it takes a file and can
+ * do some optimisations if the file is open for write already
  */
-static void handle_write_count_underflow(struct vfsmount *mnt)
+int mnt_want_write_file(struct file *file)
 {
-	if (atomic_read(&mnt->__mnt_writers) >=
-	    MNT_WRITER_UNDERFLOW_LIMIT)
-		return;
-	/*
-	 * It isn't necessary to hold all of the locks
-	 * at the same time, but doing it this way makes
-	 * us share a lot more code.
-	 */
-	lock_mnt_writers();
-	/*
-	 * vfsmount_lock is for mnt_flags.
-	 */
-	spin_lock(&vfsmount_lock);
-	/*
-	 * If coalescing the per-cpu writer counts did not
-	 * get us back to a positive writer count, we have
-	 * a bug.
-	 */
-	if ((atomic_read(&mnt->__mnt_writers) < 0) &&
-	    !(mnt->mnt_flags & MNT_IMBALANCED_WRITE_COUNT)) {
-		WARN(1, KERN_DEBUG "leak detected on mount(%p) writers "
-				"count: %d\n",
-			mnt, atomic_read(&mnt->__mnt_writers));
-		/* use the flag to keep the dmesg spam down */
-		mnt->mnt_flags |= MNT_IMBALANCED_WRITE_COUNT;
-	}
-	spin_unlock(&vfsmount_lock);
-	unlock_mnt_writers();
+	if (!(file->f_mode & FMODE_WRITE))
+		return mnt_want_write(file->f_path.mnt);
+	else
+		return mnt_clone_write(file->f_path.mnt);
 }
+EXPORT_SYMBOL_GPL(mnt_want_write_file);
 
 /**
  * mnt_drop_write - give up write access to a mount
@@ -332,37 +314,9 @@ static void handle_write_count_underflow(struct vfsmount *mnt)
  */
 void mnt_drop_write(struct vfsmount *mnt)
 {
-	int must_check_underflow = 0;
-	struct mnt_writer *cpu_writer;
-
-	cpu_writer = &get_cpu_var(mnt_writers);
-	spin_lock(&cpu_writer->lock);
-
-	use_cpu_writer_for_mount(cpu_writer, mnt);
-	if (cpu_writer->count > 0) {
-		cpu_writer->count--;
-	} else {
-		must_check_underflow = 1;
-		atomic_dec(&mnt->__mnt_writers);
-	}
-
-	spin_unlock(&cpu_writer->lock);
-	/*
-	 * Logically, we could call this each time,
-	 * but the __mnt_writers cacheline tends to
-	 * be cold, and makes this expensive.
-	 */
-	if (must_check_underflow)
-		handle_write_count_underflow(mnt);
-	/*
-	 * This could be done right after the spinlock
-	 * is taken because the spinlock keeps us on
-	 * the cpu, and disables preemption.  However,
-	 * putting it here bounds the amount that
-	 * __mnt_writers can underflow.  Without it,
-	 * we could theoretically wrap __mnt_writers.
-	 */
-	put_cpu_var(mnt_writers);
+	preempt_disable();
+	dec_mnt_writers(mnt);
+	preempt_enable();
 }
 EXPORT_SYMBOL_GPL(mnt_drop_write);
 
@@ -370,24 +324,41 @@ static int mnt_make_readonly(struct vfsmount *mnt)
 {
 	int ret = 0;
 
-	lock_mnt_writers();
+	spin_lock(&vfsmount_lock);
+	mnt->mnt_flags |= MNT_WRITE_HOLD;
 	/*
-	 * With all the locks held, this value is stable
+	 * After storing MNT_WRITE_HOLD, we'll read the counters. This store
+	 * should be visible before we do.
 	 */
-	if (atomic_read(&mnt->__mnt_writers) > 0) {
-		ret = -EBUSY;
-		goto out;
-	}
+	smp_mb();
+
 	/*
-	 * nobody can do a successful mnt_want_write() with all
-	 * of the counts in MNT_DENIED_WRITE and the locks held.
+	 * With writers on hold, if this value is zero, then there are
+	 * definitely no active writers (although held writers may subsequently
+	 * increment the count, they'll have to wait, and decrement it after
+	 * seeing MNT_READONLY).
+	 *
+	 * It is OK to have counter incremented on one CPU and decremented on
+	 * another: the sum will add up correctly. The danger would be when we
+	 * sum up each counter, if we read a counter before it is incremented,
+	 * but then read another CPU's count which it has been subsequently
+	 * decremented from -- we would see more decrements than we should.
+	 * MNT_WRITE_HOLD protects against this scenario, because
+	 * mnt_want_write first increments count, then smp_mb, then spins on
+	 * MNT_WRITE_HOLD, so it can't be decremented by another CPU while
+	 * we're counting up here.
 	 */
-	spin_lock(&vfsmount_lock);
-	if (!ret)
+	if (count_mnt_writers(mnt) > 0)
+		ret = -EBUSY;
+	else
 		mnt->mnt_flags |= MNT_READONLY;
+	/*
+	 * MNT_READONLY must become visible before ~MNT_WRITE_HOLD, so writers
+	 * that become unheld will see MNT_READONLY.
+	 */
+	smp_wmb();
+	mnt->mnt_flags &= ~MNT_WRITE_HOLD;
 	spin_unlock(&vfsmount_lock);
-out:
-	unlock_mnt_writers();
 	return ret;
 }
 
@@ -410,6 +381,9 @@ void free_vfsmnt(struct vfsmount *mnt)
 {
 	kfree(mnt->mnt_devname);
 	mnt_free_id(mnt);
+#ifdef CONFIG_SMP
+	free_percpu(mnt->mnt_writers);
+#endif
 	kmem_cache_free(mnt_cache, mnt);
 }
 
@@ -442,11 +416,11 @@ struct vfsmount *__lookup_mnt(struct vfsmount *mnt, struct dentry *dentry,
  * lookup_mnt increments the ref count before returning
  * the vfsmount struct.
  */
-struct vfsmount *lookup_mnt(struct vfsmount *mnt, struct dentry *dentry)
+struct vfsmount *lookup_mnt(struct path *path)
 {
 	struct vfsmount *child_mnt;
 	spin_lock(&vfsmount_lock);
-	if ((child_mnt = __lookup_mnt(mnt, dentry, 1)))
+	if ((child_mnt = __lookup_mnt(path->mnt, path->dentry, 1)))
 		mntget(child_mnt);
 	spin_unlock(&vfsmount_lock);
 	return child_mnt;
@@ -604,38 +578,18 @@ static struct vfsmount *clone_mnt(struct vfsmount *old, struct dentry *root,
 
 static inline void __mntput(struct vfsmount *mnt)
 {
-	int cpu;
 	struct super_block *sb = mnt->mnt_sb;
 	/*
-	 * We don't have to hold all of the locks at the
-	 * same time here because we know that we're the
-	 * last reference to mnt and that no new writers
-	 * can come in.
-	 */
-	for_each_possible_cpu(cpu) {
-		struct mnt_writer *cpu_writer = &per_cpu(mnt_writers, cpu);
-		spin_lock(&cpu_writer->lock);
-		if (cpu_writer->mnt != mnt) {
-			spin_unlock(&cpu_writer->lock);
-			continue;
-		}
-		atomic_add(cpu_writer->count, &mnt->__mnt_writers);
-		cpu_writer->count = 0;
-		/*
-		 * Might as well do this so that no one
-		 * ever sees the pointer and expects
-		 * it to be valid.
-		 */
-		cpu_writer->mnt = NULL;
-		spin_unlock(&cpu_writer->lock);
-	}
-	/*
 	 * This probably indicates that somebody messed
 	 * up a mnt_want/drop_write() pair.  If this
 	 * happens, the filesystem was probably unable
 	 * to make r/w->r/o transitions.
 	 */
-	WARN_ON(atomic_read(&mnt->__mnt_writers));
+	/*
+	 * atomic_dec_and_lock() used to deal with ->mnt_count decrements
+	 * provides barriers, so count_mnt_writers() below is safe.  AV
+	 */
+	WARN_ON(count_mnt_writers(mnt));
 	dput(mnt->mnt_root);
 	free_vfsmnt(mnt);
 	deactivate_super(sb);
@@ -1106,11 +1060,8 @@ static int do_umount(struct vfsmount *mnt, int flags)
 		 * we just try to remount it readonly.
 		 */
 		down_write(&sb->s_umount);
-		if (!(sb->s_flags & MS_RDONLY)) {
-			lock_kernel();
+		if (!(sb->s_flags & MS_RDONLY))
 			retval = do_remount_sb(sb, MS_RDONLY, NULL, 0);
-			unlock_kernel();
-		}
 		up_write(&sb->s_umount);
 		return retval;
 	}
@@ -1253,11 +1204,11 @@ Enomem:
 	return NULL;
 }
 
-struct vfsmount *collect_mounts(struct vfsmount *mnt, struct dentry *dentry)
+struct vfsmount *collect_mounts(struct path *path)
 {
 	struct vfsmount *tree;
 	down_write(&namespace_sem);
-	tree = copy_tree(mnt, dentry, CL_COPY_ALL | CL_PRIVATE);
+	tree = copy_tree(path->mnt, path->dentry, CL_COPY_ALL | CL_PRIVATE);
 	up_write(&namespace_sem);
 	return tree;
 }
@@ -1430,7 +1381,7 @@ static int graft_tree(struct vfsmount *mnt, struct path *path)
 		goto out_unlock;
 
 	err = -ENOENT;
-	if (IS_ROOT(path->dentry) || !d_unhashed(path->dentry))
+	if (!d_unlinked(path->dentry))
 		err = attach_recursive_mnt(mnt, path, NULL);
 out_unlock:
 	mutex_unlock(&path->dentry->d_inode->i_mutex);
@@ -1601,7 +1552,7 @@ static int do_move_mount(struct path *path, char *old_name)
 
 	down_write(&namespace_sem);
 	while (d_mountpoint(path->dentry) &&
-	       follow_down(&path->mnt, &path->dentry))
+	       follow_down(path))
 		;
 	err = -EINVAL;
 	if (!check_mnt(path->mnt) || !check_mnt(old_path.mnt))
@@ -1612,7 +1563,7 @@ static int do_move_mount(struct path *path, char *old_name)
 	if (IS_DEADDIR(path->dentry->d_inode))
 		goto out1;
 
-	if (!IS_ROOT(path->dentry) && d_unhashed(path->dentry))
+	if (d_unlinked(path->dentry))
 		goto out1;
 
 	err = -EINVAL;
@@ -1676,7 +1627,9 @@ static int do_new_mount(struct path *path, char *type, int flags,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
+	lock_kernel();
 	mnt = do_kern_mount(type, flags, name, data);
+	unlock_kernel();
 	if (IS_ERR(mnt))
 		return PTR_ERR(mnt);
 
@@ -1695,10 +1648,10 @@ int do_add_mount(struct vfsmount *newmnt, struct path *path,
 	down_write(&namespace_sem);
 	/* Something was mounted here while we slept */
 	while (d_mountpoint(path->dentry) &&
-	       follow_down(&path->mnt, &path->dentry))
+	       follow_down(path))
 		;
 	err = -EINVAL;
-	if (!check_mnt(path->mnt))
+	if (!(mnt_flags & MNT_SHRINKABLE) && !check_mnt(path->mnt))
 		goto unlock;
 
 	/* Refuse the same filesystem on the same mount point */
@@ -2092,10 +2045,8 @@ SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
 	if (retval < 0)
 		goto out3;
 
-	lock_kernel();
 	retval = do_mount((char *)dev_page, dir_page, (char *)type_page,
 			  flags, (void *)data_page);
-	unlock_kernel();
 	free_page(data_page);
 
 out3:
@@ -2175,9 +2126,9 @@ SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
 	error = -ENOENT;
 	if (IS_DEADDIR(new.dentry->d_inode))
 		goto out2;
-	if (d_unhashed(new.dentry) && !IS_ROOT(new.dentry))
+	if (d_unlinked(new.dentry))
 		goto out2;
-	if (d_unhashed(old.dentry) && !IS_ROOT(old.dentry))
+	if (d_unlinked(old.dentry))
 		goto out2;
 	error = -EBUSY;
 	if (new.mnt == root.mnt ||
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index d642f0e5b36..b99ce205b1b 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -736,6 +736,8 @@ static void ncp_put_super(struct super_block *sb)
 {
 	struct ncp_server *server = NCP_SBP(sb);
 
+	lock_kernel();
+
 	ncp_lock_server(server);
 	ncp_disconnect(server);
 	ncp_unlock_server(server);
@@ -769,6 +771,8 @@ static void ncp_put_super(struct super_block *sb)
 	vfree(server->packet);
 	sb->s_fs_info = NULL;
 	kfree(server);
+
+	unlock_kernel();
 }
 
 static int ncp_statfs(struct dentry *dentry, struct kstatfs *buf)
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 370b190a09d..89f98e9a024 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1943,7 +1943,8 @@ int nfs_permission(struct inode *inode, int mask)
 		case S_IFREG:
 			/* NFSv4 has atomic_open... */
 			if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
-					&& (mask & MAY_OPEN))
+					&& (mask & MAY_OPEN)
+					&& !(mask & MAY_EXEC))
 				goto out;
 			break;
 		case S_IFDIR:
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 64a288ee046..f01caec8446 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -154,7 +154,7 @@ out_err:
 	goto out;
 out_follow:
 	while (d_mountpoint(nd->path.dentry) &&
-	       follow_down(&nd->path.mnt, &nd->path.dentry))
+	       follow_down(&nd->path))
 		;
 	err = 0;
 	goto out;
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index a4d24268029..4674f8092da 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2594,12 +2594,9 @@ static void nfs4_renew_done(struct rpc_task *task, void *data)
 	unsigned long timestamp = (unsigned long)data;
 
 	if (task->tk_status < 0) {
-		switch (task->tk_status) {
-			case -NFS4ERR_STALE_CLIENTID:
-			case -NFS4ERR_EXPIRED:
-			case -NFS4ERR_CB_PATH_DOWN:
-				nfs4_schedule_state_recovery(clp);
-		}
+		/* Unless we're shutting down, schedule state recovery! */
+		if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0)
+			nfs4_schedule_state_recovery(clp);
 		return;
 	}
 	spin_lock(&clp->cl_lock);
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index d9ef602fbc5..e3ed5908820 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -129,7 +129,7 @@ enum {
 	Opt_err
 };
 
-static match_table_t __initconst tokens = {
+static const match_table_t tokens __initconst = {
 	{Opt_port, "port=%u"},
 	{Opt_rsize, "rsize=%u"},
 	{Opt_wsize, "wsize=%u"},
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index d2d67781c57..26127b69a27 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1813,6 +1813,7 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	if (data == NULL)
 		return -ENOMEM;
 
+	lock_kernel();
 	/* fill out struct with values from existing mount */
 	data->flags = nfss->flags;
 	data->rsize = nfss->rsize;
@@ -1837,6 +1838,7 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	error = nfs_compare_remount_data(nfss, data);
 out:
 	kfree(data);
+	unlock_kernel();
 	return error;
 }
 
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 5839b229cd0..8b1f8efb469 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -847,9 +847,8 @@ exp_get_fsid_key(svc_client *clp, int fsid)
 	return exp_find_key(clp, FSID_NUM, fsidv, NULL);
 }
 
-static svc_export *exp_get_by_name(svc_client *clp, struct vfsmount *mnt,
-				   struct dentry *dentry,
-				   struct cache_req *reqp)
+static svc_export *exp_get_by_name(svc_client *clp, const struct path *path,
+				     struct cache_req *reqp)
 {
 	struct svc_export *exp, key;
 	int err;
@@ -858,8 +857,7 @@ static svc_export *exp_get_by_name(svc_client *clp, struct vfsmount *mnt,
 		return ERR_PTR(-ENOENT);
 
 	key.ex_client = clp;
-	key.ex_path.mnt = mnt;
-	key.ex_path.dentry = dentry;
+	key.ex_path = *path;
 
 	exp = svc_export_lookup(&key);
 	if (exp == NULL)
@@ -873,24 +871,19 @@ static svc_export *exp_get_by_name(svc_client *clp, struct vfsmount *mnt,
 /*
  * Find the export entry for a given dentry.
  */
-static struct svc_export *exp_parent(svc_client *clp, struct vfsmount *mnt,
-				     struct dentry *dentry,
-				     struct cache_req *reqp)
+static struct svc_export *exp_parent(svc_client *clp, struct path *path)
 {
-	svc_export *exp;
-
-	dget(dentry);
-	exp = exp_get_by_name(clp, mnt, dentry, reqp);
-
-	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(dentry)) {
-		struct dentry *parent;
-
-		parent = dget_parent(dentry);
-		dput(dentry);
-		dentry = parent;
-		exp = exp_get_by_name(clp, mnt, dentry, reqp);
+	struct dentry *saved = dget(path->dentry);
+	svc_export *exp = exp_get_by_name(clp, path, NULL);
+
+	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(path->dentry)) {
+		struct dentry *parent = dget_parent(path->dentry);
+		dput(path->dentry);
+		path->dentry = parent;
+		exp = exp_get_by_name(clp, path, NULL);
 	}
-	dput(dentry);
+	dput(path->dentry);
+	path->dentry = saved;
 	return exp;
 }
 
@@ -1018,7 +1011,7 @@ exp_export(struct nfsctl_export *nxp)
 		goto out_put_clp;
 	err = -EINVAL;
 
-	exp = exp_get_by_name(clp, path.mnt, path.dentry, NULL);
+	exp = exp_get_by_name(clp, &path, NULL);
 
 	memset(&new, 0, sizeof(new));
 
@@ -1135,7 +1128,7 @@ exp_unexport(struct nfsctl_export *nxp)
 		goto out_domain;
 
 	err = -EINVAL;
-	exp = exp_get_by_name(dom, path.mnt, path.dentry, NULL);
+	exp = exp_get_by_name(dom, &path, NULL);
 	path_put(&path);
 	if (IS_ERR(exp))
 		goto out_domain;
@@ -1177,7 +1170,7 @@ exp_rootfh(svc_client *clp, char *name, struct knfsd_fh *f, int maxsize)
 	dprintk("nfsd: exp_rootfh(%s [%p] %s:%s/%ld)\n",
 		 name, path.dentry, clp->name,
 		 inode->i_sb->s_id, inode->i_ino);
-	exp = exp_parent(clp, path.mnt, path.dentry, NULL);
+	exp = exp_parent(clp, &path);
 	if (IS_ERR(exp)) {
 		err = PTR_ERR(exp);
 		goto out;
@@ -1207,7 +1200,7 @@ static struct svc_export *exp_find(struct auth_domain *clp, int fsid_type,
 	if (IS_ERR(ek))
 		return ERR_CAST(ek);
 
-	exp = exp_get_by_name(clp, ek->ek_path.mnt, ek->ek_path.dentry, reqp);
+	exp = exp_get_by_name(clp, &ek->ek_path, reqp);
 	cache_put(&ek->h, &svc_expkey_cache);
 
 	if (IS_ERR(exp))
@@ -1247,8 +1240,7 @@ __be32 check_nfsd_access(struct svc_export *exp, struct svc_rqst *rqstp)
  * use exp_get_by_name() or exp_find().
  */
 struct svc_export *
-rqst_exp_get_by_name(struct svc_rqst *rqstp, struct vfsmount *mnt,
-		struct dentry *dentry)
+rqst_exp_get_by_name(struct svc_rqst *rqstp, struct path *path)
 {
 	struct svc_export *gssexp, *exp = ERR_PTR(-ENOENT);
 
@@ -1256,8 +1248,7 @@ rqst_exp_get_by_name(struct svc_rqst *rqstp, struct vfsmount *mnt,
 		goto gss;
 
 	/* First try the auth_unix client: */
-	exp = exp_get_by_name(rqstp->rq_client, mnt, dentry,
-						&rqstp->rq_chandle);
+	exp = exp_get_by_name(rqstp->rq_client, path, &rqstp->rq_chandle);
 	if (PTR_ERR(exp) == -ENOENT)
 		goto gss;
 	if (IS_ERR(exp))
@@ -1269,8 +1260,7 @@ gss:
 	/* Otherwise, try falling back on gss client */
 	if (rqstp->rq_gssclient == NULL)
 		return exp;
-	gssexp = exp_get_by_name(rqstp->rq_gssclient, mnt, dentry,
-						&rqstp->rq_chandle);
+	gssexp = exp_get_by_name(rqstp->rq_gssclient, path, &rqstp->rq_chandle);
 	if (PTR_ERR(gssexp) == -ENOENT)
 		return exp;
 	if (!IS_ERR(exp))
@@ -1309,23 +1299,19 @@ gss:
 }
 
 struct svc_export *
-rqst_exp_parent(struct svc_rqst *rqstp, struct vfsmount *mnt,
-		struct dentry *dentry)
+rqst_exp_parent(struct svc_rqst *rqstp, struct path *path)
 {
-	struct svc_export *exp;
-
-	dget(dentry);
-	exp = rqst_exp_get_by_name(rqstp, mnt, dentry);
-
-	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(dentry)) {
-		struct dentry *parent;
-
-		parent = dget_parent(dentry);
-		dput(dentry);
-		dentry = parent;
-		exp = rqst_exp_get_by_name(rqstp, mnt, dentry);
+	struct dentry *saved = dget(path->dentry);
+	struct svc_export *exp = rqst_exp_get_by_name(rqstp, path);
+
+	while (PTR_ERR(exp) == -ENOENT && !IS_ROOT(path->dentry)) {
+		struct dentry *parent = dget_parent(path->dentry);
+		dput(path->dentry);
+		path->dentry = parent;
+		exp = rqst_exp_get_by_name(rqstp, path);
 	}
-	dput(dentry);
+	dput(path->dentry);
+	path->dentry = saved;
 	return exp;
 }
 
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 6c68ffd6b4b..99f83575359 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -55,6 +55,7 @@
 #include <linux/security.h>
 #endif /* CONFIG_NFSD_V4 */
 #include <linux/jhash.h>
+#include <linux/ima.h>
 
 #include <asm/uaccess.h>
 
@@ -100,36 +101,35 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp,
 {
 	struct svc_export *exp = *expp, *exp2 = NULL;
 	struct dentry *dentry = *dpp;
-	struct vfsmount *mnt = mntget(exp->ex_path.mnt);
-	struct dentry *mounts = dget(dentry);
+	struct path path = {.mnt = mntget(exp->ex_path.mnt),
+			    .dentry = dget(dentry)};
 	int err = 0;
 
-	while (follow_down(&mnt,&mounts)&&d_mountpoint(mounts));
+	while (d_mountpoint(path.dentry) && follow_down(&path))
+		;
 
-	exp2 = rqst_exp_get_by_name(rqstp, mnt, mounts);
+	exp2 = rqst_exp_get_by_name(rqstp, &path);
 	if (IS_ERR(exp2)) {
 		if (PTR_ERR(exp2) != -ENOENT)
 			err = PTR_ERR(exp2);
-		dput(mounts);
-		mntput(mnt);
+		path_put(&path);
 		goto out;
 	}
 	if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
 		/* successfully crossed mount point */
 		/*
-		 * This is subtle: dentry is *not* under mnt at this point.
-		 * The only reason we are safe is that original mnt is pinned
-		 * down by exp, so we should dput before putting exp.
+		 * This is subtle: path.dentry is *not* on path.mnt
+		 * at this point.  The only reason we are safe is that
+		 * original mnt is pinned down by exp, so we should
+		 * put path *before* putting exp
 		 */
-		dput(dentry);
-		*dpp = mounts;
-		exp_put(exp);
+		*dpp = path.dentry;
+		path.dentry = dentry;
 		*expp = exp2;
-	} else {
-		exp_put(exp2);
-		dput(mounts);
+		exp2 = exp;
 	}
-	mntput(mnt);
+	path_put(&path);
+	exp_put(exp2);
 out:
 	return err;
 }
@@ -168,28 +168,29 @@ nfsd_lookup_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp,
 			/* checking mountpoint crossing is very different when stepping up */
 			struct svc_export *exp2 = NULL;
 			struct dentry *dp;
-			struct vfsmount *mnt = mntget(exp->ex_path.mnt);
-			dentry = dget(dparent);
-			while(dentry == mnt->mnt_root && follow_up(&mnt, &dentry))
+			struct path path = {.mnt = mntget(exp->ex_path.mnt),
+					    .dentry = dget(dparent)};
+
+			while (path.dentry == path.mnt->mnt_root &&
+			       follow_up(&path))
 				;
-			dp = dget_parent(dentry);
-			dput(dentry);
-			dentry = dp;
+			dp = dget_parent(path.dentry);
+			dput(path.dentry);
+			path.dentry = dp;
 
-			exp2 = rqst_exp_parent(rqstp, mnt, dentry);
+			exp2 = rqst_exp_parent(rqstp, &path);
 			if (PTR_ERR(exp2) == -ENOENT) {
-				dput(dentry);
 				dentry = dget(dparent);
 			} else if (IS_ERR(exp2)) {
 				host_err = PTR_ERR(exp2);
-				dput(dentry);
-				mntput(mnt);
+				path_put(&path);
 				goto out_nfserr;
 			} else {
+				dentry = dget(path.dentry);
 				exp_put(exp);
 				exp = exp2;
 			}
-			mntput(mnt);
+			path_put(&path);
 		}
 	} else {
 		fh_lock(fhp);
@@ -735,6 +736,8 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
 			    flags, cred);
 	if (IS_ERR(*filp))
 		host_err = PTR_ERR(*filp);
+	else
+		ima_counts_get(*filp);
 out_nfserr:
 	err = nfserrno(host_err);
 out:
@@ -1015,6 +1018,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 	host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
 	set_fs(oldfs);
 	if (host_err >= 0) {
+		*cnt = host_err;
 		nfsdstats.io_write += host_err;
 		fsnotify_modify(file->f_path.dentry);
 	}
@@ -1060,10 +1064,9 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 	}
 
 	dprintk("nfsd: write complete host_err=%d\n", host_err);
-	if (host_err >= 0) {
+	if (host_err >= 0)
 		err = 0;
-		*cnt = host_err;
-	} else
+	else
 		err = nfserrno(host_err);
 out:
 	return err;
@@ -2024,6 +2027,7 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp,
 					struct dentry *dentry, int acc)
 {
 	struct inode	*inode = dentry->d_inode;
+	struct path	path;
 	int		err;
 
 	if (acc == NFSD_MAY_NOP)
@@ -2096,7 +2100,17 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp,
 	if (err == -EACCES && S_ISREG(inode->i_mode) &&
 	    acc == (NFSD_MAY_READ | NFSD_MAY_OWNER_OVERRIDE))
 		err = inode_permission(inode, MAY_EXEC);
+	if (err)
+		goto nfsd_out;
 
+	/* Do integrity (permission) checking now, but defer incrementing
+	 * IMA counts to the actual file open.
+	 */
+	path.mnt = exp->ex_path.mnt;
+	path.dentry = dentry;
+	err = ima_path_check(&path, acc & (MAY_READ | MAY_WRITE | MAY_EXEC),
+			     IMA_COUNT_LEAVE);
+nfsd_out:
 	return err? nfserrno(err) : 0;
 }
 
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index e90b60dfced..cadd36b14d0 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -311,7 +311,7 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 		ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
 		if (ret < 0) {
 			if (ret != -ENOENT)
-				goto out_sem;
+				goto out_header;
 			/* skip hole */
 			ret = 0;
 			continue;
@@ -344,7 +344,7 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 					continue;
 				printk(KERN_ERR "%s: cannot delete block\n",
 				       __func__);
-				goto out_sem;
+				goto out_header;
 			}
 		}
 
@@ -361,6 +361,8 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 		nilfs_mdt_mark_dirty(cpfile);
 		kunmap_atomic(kaddr, KM_USER0);
 	}
+
+ out_header:
 	brelse(header_bh);
 
  out_sem:
@@ -862,11 +864,11 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode)
 	case NILFS_CHECKPOINT:
 		/*
 		 * Check for protecting existing snapshot mounts:
-		 * bd_mount_sem is used to make this operation atomic and
+		 * ns_mount_mutex is used to make this operation atomic and
 		 * exclusive with a new mount job.  Though it doesn't cover
 		 * umount, it's enough for the purpose.
 		 */
-		down(&nilfs->ns_bdev->bd_mount_sem);
+		mutex_lock(&nilfs->ns_mount_mutex);
 		if (nilfs_checkpoint_is_mounted(nilfs, cno, 1)) {
 			/* Current implementation does not have to protect
 			   plain read-only mounts since they are exclusive
@@ -875,7 +877,7 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode)
 			ret = -EBUSY;
 		} else
 			ret = nilfs_cpfile_clear_snapshot(cpfile, cno);
-		up(&nilfs->ns_bdev->bd_mount_sem);
+		mutex_unlock(&nilfs->ns_mount_mutex);
 		return ret;
 	case NILFS_SNAPSHOT:
 		return nilfs_cpfile_set_snapshot(cpfile, cno);
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 50ff3f2cdf2..d6759b92006 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -576,7 +576,7 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
 	ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
 
  out_free:
-	while (--n > 0)
+	while (--n >= 0)
 		vfree(kbufs[n]);
 	kfree(kbufs[4]);
 	return ret;
diff --git a/fs/nilfs2/sb.h b/fs/nilfs2/sb.h
index adccd4fc654..0776ccc2504 100644
--- a/fs/nilfs2/sb.h
+++ b/fs/nilfs2/sb.h
@@ -60,6 +60,7 @@ struct nilfs_sb_info {
 	struct super_block *s_super;	/* reverse pointer to super_block */
 	struct the_nilfs *s_nilfs;
 	struct list_head s_list;	/* list head for nilfs->ns_supers */
+	atomic_t s_count;		/* reference count */
 
 	/* Segment constructor */
 	struct list_head s_dirty_files;	/* dirty files list */
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 6989b03e97a..1777a3467bd 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -65,9 +65,8 @@ MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem "
 		   "(NILFS)");
 MODULE_LICENSE("GPL");
 
+static void nilfs_write_super(struct super_block *sb);
 static int nilfs_remount(struct super_block *sb, int *flags, char *data);
-static int test_exclusive_mount(struct file_system_type *fs_type,
-				struct block_device *bdev, int flags);
 
 /**
  * nilfs_error() - report failure condition on a filesystem
@@ -315,6 +314,11 @@ static void nilfs_put_super(struct super_block *sb)
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		nilfs_write_super(sb);
+
 	nilfs_detach_segment_constructor(sbi);
 
 	if (!(sb->s_flags & MS_RDONLY)) {
@@ -323,12 +327,18 @@ static void nilfs_put_super(struct super_block *sb)
 		nilfs_commit_super(sbi, 1);
 		up_write(&nilfs->ns_sem);
 	}
+	down_write(&nilfs->ns_super_sem);
+	if (nilfs->ns_current == sbi)
+		nilfs->ns_current = NULL;
+	up_write(&nilfs->ns_super_sem);
 
 	nilfs_detach_checkpoint(sbi);
 	put_nilfs(sbi->s_nilfs);
 	sbi->s_super = NULL;
 	sb->s_fs_info = NULL;
-	kfree(sbi);
+	nilfs_put_sbinfo(sbi);
+
+	unlock_kernel();
 }
 
 /**
@@ -383,6 +393,8 @@ static int nilfs_sync_fs(struct super_block *sb, int wait)
 {
 	int err = 0;
 
+	nilfs_write_super(sb);
+
 	/* This function is called when super block should be written back */
 	if (wait)
 		err = nilfs_construct_segment(sb);
@@ -396,9 +408,9 @@ int nilfs_attach_checkpoint(struct nilfs_sb_info *sbi, __u64 cno)
 	struct buffer_head *bh_cp;
 	int err;
 
-	down_write(&nilfs->ns_sem);
+	down_write(&nilfs->ns_super_sem);
 	list_add(&sbi->s_list, &nilfs->ns_supers);
-	up_write(&nilfs->ns_sem);
+	up_write(&nilfs->ns_super_sem);
 
 	sbi->s_ifile = nilfs_mdt_new(
 		nilfs, sbi->s_super, NILFS_IFILE_INO, NILFS_IFILE_GFP);
@@ -436,9 +448,9 @@ int nilfs_attach_checkpoint(struct nilfs_sb_info *sbi, __u64 cno)
 	nilfs_mdt_destroy(sbi->s_ifile);
 	sbi->s_ifile = NULL;
 
-	down_write(&nilfs->ns_sem);
+	down_write(&nilfs->ns_super_sem);
 	list_del_init(&sbi->s_list);
-	up_write(&nilfs->ns_sem);
+	up_write(&nilfs->ns_super_sem);
 
 	return err;
 }
@@ -450,9 +462,9 @@ void nilfs_detach_checkpoint(struct nilfs_sb_info *sbi)
 	nilfs_mdt_clear(sbi->s_ifile);
 	nilfs_mdt_destroy(sbi->s_ifile);
 	sbi->s_ifile = NULL;
-	down_write(&nilfs->ns_sem);
+	down_write(&nilfs->ns_super_sem);
 	list_del_init(&sbi->s_list);
-	up_write(&nilfs->ns_sem);
+	up_write(&nilfs->ns_super_sem);
 }
 
 static int nilfs_mark_recovery_complete(struct nilfs_sb_info *sbi)
@@ -752,7 +764,7 @@ int nilfs_store_magic_and_option(struct super_block *sb,
  * @silent: silent mode flag
  * @nilfs: the_nilfs struct
  *
- * This function is called exclusively by bd_mount_mutex.
+ * This function is called exclusively by nilfs->ns_mount_mutex.
  * So, the recovery process is protected from other simultaneous mounts.
  */
 static int
@@ -773,6 +785,7 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
 	get_nilfs(nilfs);
 	sbi->s_nilfs = nilfs;
 	sbi->s_super = sb;
+	atomic_set(&sbi->s_count, 1);
 
 	err = init_nilfs(nilfs, sbi, (char *)data);
 	if (err)
@@ -870,6 +883,11 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
 		goto failed_root;
 	}
 
+	down_write(&nilfs->ns_super_sem);
+	if (!nilfs_test_opt(sbi, SNAPSHOT))
+		nilfs->ns_current = sbi;
+	up_write(&nilfs->ns_super_sem);
+
 	return 0;
 
  failed_root:
@@ -885,7 +903,7 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
  failed_sbi:
 	put_nilfs(nilfs);
 	sb->s_fs_info = NULL;
-	kfree(sbi);
+	nilfs_put_sbinfo(sbi);
 	return err;
 }
 
@@ -898,6 +916,9 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 	struct nilfs_mount_options old_opts;
 	int err;
 
+	lock_kernel();
+
+	down_write(&nilfs->ns_super_sem);
 	old_sb_flags = sb->s_flags;
 	old_opts.mount_opt = sbi->s_mount_opt;
 	old_opts.snapshot_cno = sbi->s_snapshot_cno;
@@ -945,14 +966,12 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 		 * store the current valid flag.  (It may have been changed
 		 * by fsck since we originally mounted the partition.)
 		 */
-		down(&sb->s_bdev->bd_mount_sem);
-		/* Check existing RW-mount */
-		if (test_exclusive_mount(sb->s_type, sb->s_bdev, 0)) {
+		if (nilfs->ns_current && nilfs->ns_current != sbi) {
 			printk(KERN_WARNING "NILFS (device %s): couldn't "
-			       "remount because a RW-mount exists.\n",
+			       "remount because an RW-mount exists.\n",
 			       sb->s_id);
 			err = -EBUSY;
-			goto rw_remount_failed;
+			goto restore_opts;
 		}
 		if (sbi->s_snapshot_cno != nilfs_last_cno(nilfs)) {
 			printk(KERN_WARNING "NILFS (device %s): couldn't "
@@ -960,7 +979,7 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 			       "the latest one.\n",
 			       sb->s_id);
 			err = -EINVAL;
-			goto rw_remount_failed;
+			goto restore_opts;
 		}
 		sb->s_flags &= ~MS_RDONLY;
 		nilfs_clear_opt(sbi, SNAPSHOT);
@@ -968,28 +987,31 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 
 		err = nilfs_attach_segment_constructor(sbi);
 		if (err)
-			goto rw_remount_failed;
+			goto restore_opts;
 
 		down_write(&nilfs->ns_sem);
 		nilfs_setup_super(sbi);
 		up_write(&nilfs->ns_sem);
 
-		up(&sb->s_bdev->bd_mount_sem);
+		nilfs->ns_current = sbi;
 	}
  out:
+	up_write(&nilfs->ns_super_sem);
+	unlock_kernel();
 	return 0;
 
- rw_remount_failed:
-	up(&sb->s_bdev->bd_mount_sem);
  restore_opts:
 	sb->s_flags = old_sb_flags;
 	sbi->s_mount_opt = old_opts.mount_opt;
 	sbi->s_snapshot_cno = old_opts.snapshot_cno;
+	up_write(&nilfs->ns_super_sem);
+	unlock_kernel();
 	return err;
 }
 
 struct nilfs_super_data {
 	struct block_device *bdev;
+	struct nilfs_sb_info *sbi;
 	__u64 cno;
 	int flags;
 };
@@ -1048,33 +1070,7 @@ static int nilfs_test_bdev_super(struct super_block *s, void *data)
 {
 	struct nilfs_super_data *sd = data;
 
-	return s->s_bdev == sd->bdev;
-}
-
-static int nilfs_test_bdev_super2(struct super_block *s, void *data)
-{
-	struct nilfs_super_data *sd = data;
-	int ret;
-
-	if (s->s_bdev != sd->bdev)
-		return 0;
-
-	if (!((s->s_flags | sd->flags) & MS_RDONLY))
-		return 1; /* Reuse an old R/W-mode super_block */
-
-	if (s->s_flags & sd->flags & MS_RDONLY) {
-		if (down_read_trylock(&s->s_umount)) {
-			ret = s->s_root &&
-				(sd->cno == NILFS_SB(s)->s_snapshot_cno);
-			up_read(&s->s_umount);
-			/*
-			 * This path is locked with sb_lock by sget().
-			 * So, drop_super() causes deadlock.
-			 */
-			return ret;
-		}
-	}
-	return 0;
+	return sd->sbi && s->s_fs_info == (void *)sd->sbi;
 }
 
 static int
@@ -1082,8 +1078,8 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 	     const char *dev_name, void *data, struct vfsmount *mnt)
 {
 	struct nilfs_super_data sd;
-	struct super_block *s, *s2;
-	struct the_nilfs *nilfs = NULL;
+	struct super_block *s;
+	struct the_nilfs *nilfs;
 	int err, need_to_close = 1;
 
 	sd.bdev = open_bdev_exclusive(dev_name, flags, fs_type);
@@ -1095,7 +1091,6 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 	 * much more information than normal filesystems to identify mount
 	 * instance.  For snapshot mounts, not only a mount type (ro-mount
 	 * or rw-mount) but also a checkpoint number is required.
-	 * The results are passed in sget() using nilfs_super_data.
 	 */
 	sd.cno = 0;
 	sd.flags = flags;
@@ -1104,64 +1099,59 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 		goto failed;
 	}
 
-	/*
-	 * once the super is inserted into the list by sget, s_umount
-	 * will protect the lockfs code from trying to start a snapshot
-	 * while we are mounting
-	 */
-	down(&sd.bdev->bd_mount_sem);
-	if (!sd.cno &&
-	    (err = test_exclusive_mount(fs_type, sd.bdev, flags ^ MS_RDONLY))) {
-		err = (err < 0) ? : -EBUSY;
-		goto failed_unlock;
+	nilfs = find_or_create_nilfs(sd.bdev);
+	if (!nilfs) {
+		err = -ENOMEM;
+		goto failed;
 	}
 
-	/*
-	 * Phase-1: search any existent instance and get the_nilfs
-	 */
-	s = sget(fs_type, nilfs_test_bdev_super, nilfs_set_bdev_super, &sd);
-	if (IS_ERR(s))
-		goto error_s;
-
-	if (!s->s_root) {
-		err = -ENOMEM;
-		nilfs = alloc_nilfs(sd.bdev);
-		if (!nilfs)
-			goto cancel_new;
-	} else {
-		struct nilfs_sb_info *sbi = NILFS_SB(s);
+	mutex_lock(&nilfs->ns_mount_mutex);
 
+	if (!sd.cno) {
 		/*
-		 * s_umount protects super_block from unmount process;
-		 * It covers pointers of nilfs_sb_info and the_nilfs.
+		 * Check if an exclusive mount exists or not.
+		 * Snapshot mounts coexist with a current mount
+		 * (i.e. rw-mount or ro-mount), whereas rw-mount and
+		 * ro-mount are mutually exclusive.
 		 */
-		nilfs = sbi->s_nilfs;
-		get_nilfs(nilfs);
-		up_write(&s->s_umount);
+		down_read(&nilfs->ns_super_sem);
+		if (nilfs->ns_current &&
+		    ((nilfs->ns_current->s_super->s_flags ^ flags)
+		     & MS_RDONLY)) {
+			up_read(&nilfs->ns_super_sem);
+			err = -EBUSY;
+			goto failed_unlock;
+		}
+		up_read(&nilfs->ns_super_sem);
+	}
 
-		/*
-		 * Phase-2: search specified snapshot or R/W mode super_block
-		 */
-		if (!sd.cno)
-			/* trying to get the latest checkpoint.  */
-			sd.cno = nilfs_last_cno(nilfs);
+	/*
+	 * Find existing nilfs_sb_info struct
+	 */
+	sd.sbi = nilfs_find_sbinfo(nilfs, !(flags & MS_RDONLY), sd.cno);
 
-		s2 = sget(fs_type, nilfs_test_bdev_super2,
-			  nilfs_set_bdev_super, &sd);
-		deactivate_super(s);
-		/*
-		 * Although deactivate_super() invokes close_bdev_exclusive() at
-		 * kill_block_super().  Here, s is an existent mount; we need
-		 * one more close_bdev_exclusive() call.
-		 */
-		s = s2;
-		if (IS_ERR(s))
-			goto error_s;
+	if (!sd.cno)
+		/* trying to get the latest checkpoint.  */
+		sd.cno = nilfs_last_cno(nilfs);
+
+	/*
+	 * Get super block instance holding the nilfs_sb_info struct.
+	 * A new instance is allocated if no existing mount is present or
+	 * existing instance has been unmounted.
+	 */
+	s = sget(fs_type, nilfs_test_bdev_super, nilfs_set_bdev_super, &sd);
+	if (sd.sbi)
+		nilfs_put_sbinfo(sd.sbi);
+
+	if (IS_ERR(s)) {
+		err = PTR_ERR(s);
+		goto failed_unlock;
 	}
 
 	if (!s->s_root) {
 		char b[BDEVNAME_SIZE];
 
+		/* New superblock instance created */
 		s->s_flags = flags;
 		strlcpy(s->s_id, bdevname(sd.bdev, b), sizeof(s->s_id));
 		sb_set_blocksize(s, block_size(sd.bdev));
@@ -1172,26 +1162,18 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 
 		s->s_flags |= MS_ACTIVE;
 		need_to_close = 0;
-	} else if (!(s->s_flags & MS_RDONLY)) {
-		err = -EBUSY;
 	}
 
-	up(&sd.bdev->bd_mount_sem);
+	mutex_unlock(&nilfs->ns_mount_mutex);
 	put_nilfs(nilfs);
 	if (need_to_close)
 		close_bdev_exclusive(sd.bdev, flags);
 	simple_set_mnt(mnt, s);
 	return 0;
 
- error_s:
-	up(&sd.bdev->bd_mount_sem);
-	if (nilfs)
-		put_nilfs(nilfs);
-	close_bdev_exclusive(sd.bdev, flags);
-	return PTR_ERR(s);
-
  failed_unlock:
-	up(&sd.bdev->bd_mount_sem);
+	mutex_unlock(&nilfs->ns_mount_mutex);
+	put_nilfs(nilfs);
  failed:
 	close_bdev_exclusive(sd.bdev, flags);
 
@@ -1199,70 +1181,18 @@ nilfs_get_sb(struct file_system_type *fs_type, int flags,
 
  cancel_new:
 	/* Abandoning the newly allocated superblock */
-	up(&sd.bdev->bd_mount_sem);
-	if (nilfs)
-		put_nilfs(nilfs);
+	mutex_unlock(&nilfs->ns_mount_mutex);
+	put_nilfs(nilfs);
 	up_write(&s->s_umount);
 	deactivate_super(s);
 	/*
 	 * deactivate_super() invokes close_bdev_exclusive().
 	 * We must finish all post-cleaning before this call;
-	 * put_nilfs() and unlocking bd_mount_sem need the block device.
+	 * put_nilfs() needs the block device.
 	 */
 	return err;
 }
 
-static int nilfs_test_bdev_super3(struct super_block *s, void *data)
-{
-	struct nilfs_super_data *sd = data;
-	int ret;
-
-	if (s->s_bdev != sd->bdev)
-		return 0;
-	if (down_read_trylock(&s->s_umount)) {
-		ret = (s->s_flags & MS_RDONLY) && s->s_root &&
-			nilfs_test_opt(NILFS_SB(s), SNAPSHOT);
-		up_read(&s->s_umount);
-		if (ret)
-			return 0; /* ignore snapshot mounts */
-	}
-	return !((sd->flags ^ s->s_flags) & MS_RDONLY);
-}
-
-static int __false_bdev_super(struct super_block *s, void *data)
-{
-#if 0 /* XXX: workaround for lock debug. This is not good idea */
-	up_write(&s->s_umount);
-#endif
-	return -EFAULT;
-}
-
-/**
- * test_exclusive_mount - check whether an exclusive RW/RO mount exists or not.
- * fs_type: filesystem type
- * bdev: block device
- * flag: 0 (check rw-mount) or MS_RDONLY (check ro-mount)
- * res: pointer to an integer to store result
- *
- * This function must be called within a section protected by bd_mount_mutex.
- */
-static int test_exclusive_mount(struct file_system_type *fs_type,
-				struct block_device *bdev, int flags)
-{
-	struct super_block *s;
-	struct nilfs_super_data sd = { .flags = flags, .bdev = bdev };
-
-	s = sget(fs_type, nilfs_test_bdev_super3, __false_bdev_super, &sd);
-	if (IS_ERR(s)) {
-		if (PTR_ERR(s) != -EFAULT)
-			return PTR_ERR(s);
-		return 0;  /* Not found */
-	}
-	up_write(&s->s_umount);
-	deactivate_super(s);
-	return 1;  /* Found */
-}
-
 struct file_system_type nilfs_fs_type = {
 	.owner    = THIS_MODULE,
 	.name     = "nilfs2",
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 7f65b3be4aa..e4e5c78bcc9 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -35,6 +35,10 @@
 #include "seglist.h"
 #include "segbuf.h"
 
+
+static LIST_HEAD(nilfs_objects);
+static DEFINE_SPINLOCK(nilfs_lock);
+
 void nilfs_set_last_segment(struct the_nilfs *nilfs,
 			    sector_t start_blocknr, u64 seq, __u64 cno)
 {
@@ -55,7 +59,7 @@ void nilfs_set_last_segment(struct the_nilfs *nilfs,
  * Return Value: On success, pointer to the_nilfs is returned.
  * On error, NULL is returned.
  */
-struct the_nilfs *alloc_nilfs(struct block_device *bdev)
+static struct the_nilfs *alloc_nilfs(struct block_device *bdev)
 {
 	struct the_nilfs *nilfs;
 
@@ -68,7 +72,10 @@ struct the_nilfs *alloc_nilfs(struct block_device *bdev)
 	atomic_set(&nilfs->ns_writer_refcount, -1);
 	atomic_set(&nilfs->ns_ndirtyblks, 0);
 	init_rwsem(&nilfs->ns_sem);
+	init_rwsem(&nilfs->ns_super_sem);
+	mutex_init(&nilfs->ns_mount_mutex);
 	mutex_init(&nilfs->ns_writer_mutex);
+	INIT_LIST_HEAD(&nilfs->ns_list);
 	INIT_LIST_HEAD(&nilfs->ns_supers);
 	spin_lock_init(&nilfs->ns_last_segment_lock);
 	nilfs->ns_gc_inodes_h = NULL;
@@ -78,6 +85,45 @@ struct the_nilfs *alloc_nilfs(struct block_device *bdev)
 }
 
 /**
+ * find_or_create_nilfs - find or create nilfs object
+ * @bdev: block device to which the_nilfs is related
+ *
+ * find_nilfs() looks up an existent nilfs object created on the
+ * device and gets the reference count of the object.  If no nilfs object
+ * is found on the device, a new nilfs object is allocated.
+ *
+ * Return Value: On success, pointer to the nilfs object is returned.
+ * On error, NULL is returned.
+ */
+struct the_nilfs *find_or_create_nilfs(struct block_device *bdev)
+{
+	struct the_nilfs *nilfs, *new = NULL;
+
+ retry:
+	spin_lock(&nilfs_lock);
+	list_for_each_entry(nilfs, &nilfs_objects, ns_list) {
+		if (nilfs->ns_bdev == bdev) {
+			get_nilfs(nilfs);
+			spin_unlock(&nilfs_lock);
+			if (new)
+				put_nilfs(new);
+			return nilfs; /* existing object */
+		}
+	}
+	if (new) {
+		list_add_tail(&new->ns_list, &nilfs_objects);
+		spin_unlock(&nilfs_lock);
+		return new; /* new object */
+	}
+	spin_unlock(&nilfs_lock);
+
+	new = alloc_nilfs(bdev);
+	if (new)
+		goto retry;
+	return NULL; /* insufficient memory */
+}
+
+/**
  * put_nilfs - release a reference to the_nilfs
  * @nilfs: the_nilfs structure to be released
  *
@@ -86,13 +132,20 @@ struct the_nilfs *alloc_nilfs(struct block_device *bdev)
  */
 void put_nilfs(struct the_nilfs *nilfs)
 {
-	if (!atomic_dec_and_test(&nilfs->ns_count))
+	spin_lock(&nilfs_lock);
+	if (!atomic_dec_and_test(&nilfs->ns_count)) {
+		spin_unlock(&nilfs_lock);
 		return;
+	}
+	list_del_init(&nilfs->ns_list);
+	spin_unlock(&nilfs_lock);
+
 	/*
-	 * Increment of ns_count never occur below because the caller
+	 * Increment of ns_count never occurs below because the caller
 	 * of get_nilfs() holds at least one reference to the_nilfs.
 	 * Thus its exclusion control is not required here.
 	 */
+
 	might_sleep();
 	if (nilfs_loaded(nilfs)) {
 		nilfs_mdt_clear(nilfs->ns_sufile);
@@ -515,7 +568,7 @@ int init_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, char *data)
 
 	blocksize = BLOCK_SIZE << le32_to_cpu(sbp->s_log_block_size);
 	if (sb->s_blocksize != blocksize) {
-		int hw_blocksize = bdev_hardsect_size(sb->s_bdev);
+		int hw_blocksize = bdev_logical_block_size(sb->s_bdev);
 
 		if (blocksize < hw_blocksize) {
 			printk(KERN_ERR
@@ -613,13 +666,63 @@ int nilfs_near_disk_full(struct the_nilfs *nilfs)
 	return ret;
 }
 
+/**
+ * nilfs_find_sbinfo - find existing nilfs_sb_info structure
+ * @nilfs: nilfs object
+ * @rw_mount: mount type (non-zero value for read/write mount)
+ * @cno: checkpoint number (zero for read-only mount)
+ *
+ * nilfs_find_sbinfo() returns the nilfs_sb_info structure which
+ * @rw_mount and @cno (in case of snapshots) matched.  If no instance
+ * was found, NULL is returned.  Although the super block instance can
+ * be unmounted after this function returns, the nilfs_sb_info struct
+ * is kept on memory until nilfs_put_sbinfo() is called.
+ */
+struct nilfs_sb_info *nilfs_find_sbinfo(struct the_nilfs *nilfs,
+					int rw_mount, __u64 cno)
+{
+	struct nilfs_sb_info *sbi;
+
+	down_read(&nilfs->ns_super_sem);
+	/*
+	 * The SNAPSHOT flag and sb->s_flags are supposed to be
+	 * protected with nilfs->ns_super_sem.
+	 */
+	sbi = nilfs->ns_current;
+	if (rw_mount) {
+		if (sbi && !(sbi->s_super->s_flags & MS_RDONLY))
+			goto found; /* read/write mount */
+		else
+			goto out;
+	} else if (cno == 0) {
+		if (sbi && (sbi->s_super->s_flags & MS_RDONLY))
+			goto found; /* read-only mount */
+		else
+			goto out;
+	}
+
+	list_for_each_entry(sbi, &nilfs->ns_supers, s_list) {
+		if (nilfs_test_opt(sbi, SNAPSHOT) &&
+		    sbi->s_snapshot_cno == cno)
+			goto found; /* snapshot mount */
+	}
+ out:
+	up_read(&nilfs->ns_super_sem);
+	return NULL;
+
+ found:
+	atomic_inc(&sbi->s_count);
+	up_read(&nilfs->ns_super_sem);
+	return sbi;
+}
+
 int nilfs_checkpoint_is_mounted(struct the_nilfs *nilfs, __u64 cno,
 				int snapshot_mount)
 {
 	struct nilfs_sb_info *sbi;
 	int ret = 0;
 
-	down_read(&nilfs->ns_sem);
+	down_read(&nilfs->ns_super_sem);
 	if (cno == 0 || cno > nilfs->ns_cno)
 		goto out_unlock;
 
@@ -636,6 +739,6 @@ int nilfs_checkpoint_is_mounted(struct the_nilfs *nilfs, __u64 cno,
 		ret++;
 
  out_unlock:
-	up_read(&nilfs->ns_sem);
+	up_read(&nilfs->ns_super_sem);
 	return ret;
 }
diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h
index 30fe58778d0..e8adbffc626 100644
--- a/fs/nilfs2/the_nilfs.h
+++ b/fs/nilfs2/the_nilfs.h
@@ -43,12 +43,16 @@ enum {
  * struct the_nilfs - struct to supervise multiple nilfs mount points
  * @ns_flags: flags
  * @ns_count: reference count
+ * @ns_list: list head for nilfs_list
  * @ns_bdev: block device
  * @ns_bdi: backing dev info
  * @ns_writer: back pointer to writable nilfs_sb_info
  * @ns_sem: semaphore for shared states
+ * @ns_super_sem: semaphore for global operations across super block instances
+ * @ns_mount_mutex: mutex protecting mount process of nilfs
  * @ns_writer_mutex: mutex protecting ns_writer attach/detach
  * @ns_writer_refcount: number of referrers on ns_writer
+ * @ns_current: back pointer to current mount
  * @ns_sbh: buffer heads of on-disk super blocks
  * @ns_sbp: pointers to super block data
  * @ns_sbwtime: previous write time of super blocks
@@ -88,15 +92,24 @@ enum {
 struct the_nilfs {
 	unsigned long		ns_flags;
 	atomic_t		ns_count;
+	struct list_head	ns_list;
 
 	struct block_device    *ns_bdev;
 	struct backing_dev_info *ns_bdi;
 	struct nilfs_sb_info   *ns_writer;
 	struct rw_semaphore	ns_sem;
+	struct rw_semaphore	ns_super_sem;
+	struct mutex		ns_mount_mutex;
 	struct mutex		ns_writer_mutex;
 	atomic_t		ns_writer_refcount;
 
 	/*
+	 * components protected by ns_super_sem
+	 */
+	struct nilfs_sb_info   *ns_current;
+	struct list_head	ns_supers;
+
+	/*
 	 * used for
 	 * - loading the latest checkpoint exclusively.
 	 * - allocating a new full segment.
@@ -108,7 +121,6 @@ struct the_nilfs {
 	time_t			ns_sbwtime[2];
 	unsigned		ns_sbsize;
 	unsigned		ns_mount_state;
-	struct list_head	ns_supers;
 
 	/*
 	 * Following fields are dedicated to a writable FS-instance.
@@ -191,11 +203,12 @@ THE_NILFS_FNS(DISCONTINUED, discontinued)
 #define NILFS_ALTSB_FREQ	60  /* spare superblock */
 
 void nilfs_set_last_segment(struct the_nilfs *, sector_t, u64, __u64);
-struct the_nilfs *alloc_nilfs(struct block_device *);
+struct the_nilfs *find_or_create_nilfs(struct block_device *);
 void put_nilfs(struct the_nilfs *);
 int init_nilfs(struct the_nilfs *, struct nilfs_sb_info *, char *);
 int load_nilfs(struct the_nilfs *, struct nilfs_sb_info *);
 int nilfs_count_free_blocks(struct the_nilfs *, sector_t *);
+struct nilfs_sb_info *nilfs_find_sbinfo(struct the_nilfs *, int, __u64);
 int nilfs_checkpoint_is_mounted(struct the_nilfs *, __u64, int);
 int nilfs_near_disk_full(struct the_nilfs *);
 void nilfs_fall_back_super_block(struct the_nilfs *);
@@ -238,6 +251,12 @@ nilfs_detach_writer(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 	mutex_unlock(&nilfs->ns_writer_mutex);
 }
 
+static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi)
+{
+	if (!atomic_dec_and_test(&sbi->s_count))
+		kfree(sbi);
+}
+
 static inline void
 nilfs_get_segment_range(struct the_nilfs *nilfs, __u64 segnum,
 			sector_t *seg_start, sector_t *seg_end)
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 50914d7303c..31dac7e3b0f 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -1,2 +1,15 @@
+config FSNOTIFY
+	bool "Filesystem notification backend"
+	default y
+	---help---
+	   fsnotify is a backend for filesystem notification.  fsnotify does
+	   not provide any userspace interface but does provide the basis
+	   needed for other notification schemes such as dnotify, inotify,
+	   and fanotify.
+
+	   Say Y here to enable fsnotify suport.
+
+	   If unsure, say Y.
+
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
diff --git a/fs/notify/Makefile b/fs/notify/Makefile
index 5a95b6010ce..0922cc826c4 100644
--- a/fs/notify/Makefile
+++ b/fs/notify/Makefile
@@ -1,2 +1,4 @@
+obj-$(CONFIG_FSNOTIFY)		+= fsnotify.o notification.o group.o inode_mark.o
+
 obj-y			+= dnotify/
 obj-y			+= inotify/
diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig
index 26adf5dfa64..904ff8d5405 100644
--- a/fs/notify/dnotify/Kconfig
+++ b/fs/notify/dnotify/Kconfig
@@ -1,5 +1,6 @@
 config DNOTIFY
 	bool "Dnotify support"
+	depends on FSNOTIFY
 	default y
 	help
 	  Dnotify is a directory-based per-fd file change notification system
diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c
index b0aa2cde80b..828a889be90 100644
--- a/fs/notify/dnotify/dnotify.c
+++ b/fs/notify/dnotify/dnotify.c
@@ -3,6 +3,9 @@
  *
  * Copyright (C) 2000,2001,2002 Stephen Rothwell
  *
+ * Copyright (C) 2009 Eric Paris <Red Hat Inc>
+ * dnotify was largly rewritten to use the new fsnotify infrastructure
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
@@ -21,24 +24,173 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/fdtable.h>
+#include <linux/fsnotify_backend.h>
 
 int dir_notify_enable __read_mostly = 1;
 
-static struct kmem_cache *dn_cache __read_mostly;
+static struct kmem_cache *dnotify_struct_cache __read_mostly;
+static struct kmem_cache *dnotify_mark_entry_cache __read_mostly;
+static struct fsnotify_group *dnotify_group __read_mostly;
+static DEFINE_MUTEX(dnotify_mark_mutex);
+
+/*
+ * dnotify will attach one of these to each inode (i_fsnotify_mark_entries) which
+ * is being watched by dnotify.  If multiple userspace applications are watching
+ * the same directory with dnotify their information is chained in dn
+ */
+struct dnotify_mark_entry {
+	struct fsnotify_mark_entry fsn_entry;
+	struct dnotify_struct *dn;
+};
 
-static void redo_inode_mask(struct inode *inode)
+/*
+ * When a process starts or stops watching an inode the set of events which
+ * dnotify cares about for that inode may change.  This function runs the
+ * list of everything receiving dnotify events about this directory and calculates
+ * the set of all those events.  After it updates what dnotify is interested in
+ * it calls the fsnotify function so it can update the set of all events relevant
+ * to this inode.
+ */
+static void dnotify_recalc_inode_mask(struct fsnotify_mark_entry *entry)
 {
-	unsigned long new_mask;
+	__u32 new_mask, old_mask;
 	struct dnotify_struct *dn;
+	struct dnotify_mark_entry *dnentry  = container_of(entry,
+							   struct dnotify_mark_entry,
+							   fsn_entry);
+
+	assert_spin_locked(&entry->lock);
 
+	old_mask = entry->mask;
 	new_mask = 0;
-	for (dn = inode->i_dnotify; dn != NULL; dn = dn->dn_next)
-		new_mask |= dn->dn_mask & ~DN_MULTISHOT;
-	inode->i_dnotify_mask = new_mask;
+	for (dn = dnentry->dn; dn != NULL; dn = dn->dn_next)
+		new_mask |= (dn->dn_mask & ~FS_DN_MULTISHOT);
+	entry->mask = new_mask;
+
+	if (old_mask == new_mask)
+		return;
+
+	if (entry->inode)
+		fsnotify_recalc_inode_mask(entry->inode);
+}
+
+/*
+ * Mains fsnotify call where events are delivered to dnotify.
+ * Find the dnotify mark on the relevant inode, run the list of dnotify structs
+ * on that mark and determine which of them has expressed interest in receiving
+ * events of this type.  When found send the correct process and signal and
+ * destroy the dnotify struct if it was not registered to receive multiple
+ * events.
+ */
+static int dnotify_handle_event(struct fsnotify_group *group,
+				struct fsnotify_event *event)
+{
+	struct fsnotify_mark_entry *entry = NULL;
+	struct dnotify_mark_entry *dnentry;
+	struct inode *to_tell;
+	struct dnotify_struct *dn;
+	struct dnotify_struct **prev;
+	struct fown_struct *fown;
+
+	to_tell = event->to_tell;
+
+	spin_lock(&to_tell->i_lock);
+	entry = fsnotify_find_mark_entry(group, to_tell);
+	spin_unlock(&to_tell->i_lock);
+
+	/* unlikely since we alreay passed dnotify_should_send_event() */
+	if (unlikely(!entry))
+		return 0;
+	dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+
+	spin_lock(&entry->lock);
+	prev = &dnentry->dn;
+	while ((dn = *prev) != NULL) {
+		if ((dn->dn_mask & event->mask) == 0) {
+			prev = &dn->dn_next;
+			continue;
+		}
+		fown = &dn->dn_filp->f_owner;
+		send_sigio(fown, dn->dn_fd, POLL_MSG);
+		if (dn->dn_mask & FS_DN_MULTISHOT)
+			prev = &dn->dn_next;
+		else {
+			*prev = dn->dn_next;
+			kmem_cache_free(dnotify_struct_cache, dn);
+			dnotify_recalc_inode_mask(entry);
+		}
+	}
+
+	spin_unlock(&entry->lock);
+	fsnotify_put_mark(entry);
+
+	return 0;
+}
+
+/*
+ * Given an inode and mask determine if dnotify would be interested in sending
+ * userspace notification for that pair.
+ */
+static bool dnotify_should_send_event(struct fsnotify_group *group,
+				      struct inode *inode, __u32 mask)
+{
+	struct fsnotify_mark_entry *entry;
+	bool send;
+
+	/* !dir_notify_enable should never get here, don't waste time checking
+	if (!dir_notify_enable)
+		return 0; */
+
+	/* not a dir, dnotify doesn't care */
+	if (!S_ISDIR(inode->i_mode))
+		return false;
+
+	spin_lock(&inode->i_lock);
+	entry = fsnotify_find_mark_entry(group, inode);
+	spin_unlock(&inode->i_lock);
+
+	/* no mark means no dnotify watch */
+	if (!entry)
+		return false;
+
+	mask = (mask & ~FS_EVENT_ON_CHILD);
+	send = (mask & entry->mask);
+
+	fsnotify_put_mark(entry); /* matches fsnotify_find_mark_entry */
+
+	return send;
+}
+
+static void dnotify_free_mark(struct fsnotify_mark_entry *entry)
+{
+	struct dnotify_mark_entry *dnentry = container_of(entry,
+							  struct dnotify_mark_entry,
+							  fsn_entry);
+
+	BUG_ON(dnentry->dn);
+
+	kmem_cache_free(dnotify_mark_entry_cache, dnentry);
 }
 
+static struct fsnotify_ops dnotify_fsnotify_ops = {
+	.handle_event = dnotify_handle_event,
+	.should_send_event = dnotify_should_send_event,
+	.free_group_priv = NULL,
+	.freeing_mark = NULL,
+	.free_event_priv = NULL,
+};
+
+/*
+ * Called every time a file is closed.  Looks first for a dnotify mark on the
+ * inode.  If one is found run all of the ->dn entries attached to that
+ * mark for one relevant to this process closing the file and remove that
+ * dnotify_struct.  If that was the last dnotify_struct also remove the
+ * fsnotify_mark_entry.
+ */
 void dnotify_flush(struct file *filp, fl_owner_t id)
 {
+	struct fsnotify_mark_entry *entry;
+	struct dnotify_mark_entry *dnentry;
 	struct dnotify_struct *dn;
 	struct dnotify_struct **prev;
 	struct inode *inode;
@@ -46,145 +198,243 @@ void dnotify_flush(struct file *filp, fl_owner_t id)
 	inode = filp->f_path.dentry->d_inode;
 	if (!S_ISDIR(inode->i_mode))
 		return;
+
 	spin_lock(&inode->i_lock);
-	prev = &inode->i_dnotify;
+	entry = fsnotify_find_mark_entry(dnotify_group, inode);
+	spin_unlock(&inode->i_lock);
+	if (!entry)
+		return;
+	dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+
+	mutex_lock(&dnotify_mark_mutex);
+
+	spin_lock(&entry->lock);
+	prev = &dnentry->dn;
 	while ((dn = *prev) != NULL) {
 		if ((dn->dn_owner == id) && (dn->dn_filp == filp)) {
 			*prev = dn->dn_next;
-			redo_inode_mask(inode);
-			kmem_cache_free(dn_cache, dn);
+			kmem_cache_free(dnotify_struct_cache, dn);
+			dnotify_recalc_inode_mask(entry);
 			break;
 		}
 		prev = &dn->dn_next;
 	}
-	spin_unlock(&inode->i_lock);
+
+	spin_unlock(&entry->lock);
+
+	/* nothing else could have found us thanks to the dnotify_mark_mutex */
+	if (dnentry->dn == NULL)
+		fsnotify_destroy_mark_by_entry(entry);
+
+	fsnotify_recalc_group_mask(dnotify_group);
+
+	mutex_unlock(&dnotify_mark_mutex);
+
+	fsnotify_put_mark(entry);
+}
+
+/* this conversion is done only at watch creation */
+static __u32 convert_arg(unsigned long arg)
+{
+	__u32 new_mask = FS_EVENT_ON_CHILD;
+
+	if (arg & DN_MULTISHOT)
+		new_mask |= FS_DN_MULTISHOT;
+	if (arg & DN_DELETE)
+		new_mask |= (FS_DELETE | FS_MOVED_FROM);
+	if (arg & DN_MODIFY)
+		new_mask |= FS_MODIFY;
+	if (arg & DN_ACCESS)
+		new_mask |= FS_ACCESS;
+	if (arg & DN_ATTRIB)
+		new_mask |= FS_ATTRIB;
+	if (arg & DN_RENAME)
+		new_mask |= FS_DN_RENAME;
+	if (arg & DN_CREATE)
+		new_mask |= (FS_CREATE | FS_MOVED_TO);
+
+	return new_mask;
 }
 
+/*
+ * If multiple processes watch the same inode with dnotify there is only one
+ * dnotify mark in inode->i_fsnotify_mark_entries but we chain a dnotify_struct
+ * onto that mark.  This function either attaches the new dnotify_struct onto
+ * that list, or it |= the mask onto an existing dnofiy_struct.
+ */
+static int attach_dn(struct dnotify_struct *dn, struct dnotify_mark_entry *dnentry,
+		     fl_owner_t id, int fd, struct file *filp, __u32 mask)
+{
+	struct dnotify_struct *odn;
+
+	odn = dnentry->dn;
+	while (odn != NULL) {
+		/* adding more events to existing dnofiy_struct? */
+		if ((odn->dn_owner == id) && (odn->dn_filp == filp)) {
+			odn->dn_fd = fd;
+			odn->dn_mask |= mask;
+			return -EEXIST;
+		}
+		odn = odn->dn_next;
+	}
+
+	dn->dn_mask = mask;
+	dn->dn_fd = fd;
+	dn->dn_filp = filp;
+	dn->dn_owner = id;
+	dn->dn_next = dnentry->dn;
+	dnentry->dn = dn;
+
+	return 0;
+}
+
+/*
+ * When a process calls fcntl to attach a dnotify watch to a directory it ends
+ * up here.  Allocate both a mark for fsnotify to add and a dnotify_struct to be
+ * attached to the fsnotify_mark.
+ */
 int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
 {
+	struct dnotify_mark_entry *new_dnentry, *dnentry;
+	struct fsnotify_mark_entry *new_entry, *entry;
 	struct dnotify_struct *dn;
-	struct dnotify_struct *odn;
-	struct dnotify_struct **prev;
 	struct inode *inode;
 	fl_owner_t id = current->files;
 	struct file *f;
-	int error = 0;
+	int destroy = 0, error = 0;
+	__u32 mask;
+
+	/* we use these to tell if we need to kfree */
+	new_entry = NULL;
+	dn = NULL;
+
+	if (!dir_notify_enable) {
+		error = -EINVAL;
+		goto out_err;
+	}
 
+	/* a 0 mask means we are explicitly removing the watch */
 	if ((arg & ~DN_MULTISHOT) == 0) {
 		dnotify_flush(filp, id);
-		return 0;
+		error = 0;
+		goto out_err;
 	}
-	if (!dir_notify_enable)
-		return -EINVAL;
+
+	/* dnotify only works on directories */
 	inode = filp->f_path.dentry->d_inode;
-	if (!S_ISDIR(inode->i_mode))
-		return -ENOTDIR;
-	dn = kmem_cache_alloc(dn_cache, GFP_KERNEL);
-	if (dn == NULL)
-		return -ENOMEM;
-	spin_lock(&inode->i_lock);
-	prev = &inode->i_dnotify;
-	while ((odn = *prev) != NULL) {
-		if ((odn->dn_owner == id) && (odn->dn_filp == filp)) {
-			odn->dn_fd = fd;
-			odn->dn_mask |= arg;
-			inode->i_dnotify_mask |= arg & ~DN_MULTISHOT;
-			goto out_free;
-		}
-		prev = &odn->dn_next;
+	if (!S_ISDIR(inode->i_mode)) {
+		error = -ENOTDIR;
+		goto out_err;
 	}
 
-	rcu_read_lock();
-	f = fcheck(fd);
-	rcu_read_unlock();
-	/* we'd lost the race with close(), sod off silently */
-	/* note that inode->i_lock prevents reordering problems
-	 * between accesses to descriptor table and ->i_dnotify */
-	if (f != filp)
-		goto out_free;
+	/* expect most fcntl to add new rather than augment old */
+	dn = kmem_cache_alloc(dnotify_struct_cache, GFP_KERNEL);
+	if (!dn) {
+		error = -ENOMEM;
+		goto out_err;
+	}
 
-	error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
-	if (error)
-		goto out_free;
+	/* new fsnotify mark, we expect most fcntl calls to add a new mark */
+	new_dnentry = kmem_cache_alloc(dnotify_mark_entry_cache, GFP_KERNEL);
+	if (!new_dnentry) {
+		error = -ENOMEM;
+		goto out_err;
+	}
 
-	dn->dn_mask = arg;
-	dn->dn_fd = fd;
-	dn->dn_filp = filp;
-	dn->dn_owner = id;
-	inode->i_dnotify_mask |= arg & ~DN_MULTISHOT;
-	dn->dn_next = inode->i_dnotify;
-	inode->i_dnotify = dn;
-	spin_unlock(&inode->i_lock);
-	return 0;
+	/* convert the userspace DN_* "arg" to the internal FS_* defines in fsnotify */
+	mask = convert_arg(arg);
 
-out_free:
-	spin_unlock(&inode->i_lock);
-	kmem_cache_free(dn_cache, dn);
-	return error;
-}
+	/* set up the new_entry and new_dnentry */
+	new_entry = &new_dnentry->fsn_entry;
+	fsnotify_init_mark(new_entry, dnotify_free_mark);
+	new_entry->mask = mask;
+	new_dnentry->dn = NULL;
 
-void __inode_dir_notify(struct inode *inode, unsigned long event)
-{
-	struct dnotify_struct *	dn;
-	struct dnotify_struct **prev;
-	struct fown_struct *	fown;
-	int			changed = 0;
+	/* this is needed to prevent the fcntl/close race described below */
+	mutex_lock(&dnotify_mark_mutex);
 
+	/* add the new_entry or find an old one. */
 	spin_lock(&inode->i_lock);
-	prev = &inode->i_dnotify;
-	while ((dn = *prev) != NULL) {
-		if ((dn->dn_mask & event) == 0) {
-			prev = &dn->dn_next;
-			continue;
-		}
-		fown = &dn->dn_filp->f_owner;
-		send_sigio(fown, dn->dn_fd, POLL_MSG);
-		if (dn->dn_mask & DN_MULTISHOT)
-			prev = &dn->dn_next;
-		else {
-			*prev = dn->dn_next;
-			changed = 1;
-			kmem_cache_free(dn_cache, dn);
-		}
-	}
-	if (changed)
-		redo_inode_mask(inode);
+	entry = fsnotify_find_mark_entry(dnotify_group, inode);
 	spin_unlock(&inode->i_lock);
-}
-
-EXPORT_SYMBOL(__inode_dir_notify);
+	if (entry) {
+		dnentry = container_of(entry, struct dnotify_mark_entry, fsn_entry);
+		spin_lock(&entry->lock);
+	} else {
+		fsnotify_add_mark(new_entry, dnotify_group, inode);
+		spin_lock(&new_entry->lock);
+		entry = new_entry;
+		dnentry = new_dnentry;
+		/* we used new_entry, so don't free it */
+		new_entry = NULL;
+	}
 
-/*
- * This is hopelessly wrong, but unfixable without API changes.  At
- * least it doesn't oops the kernel...
- *
- * To safely access ->d_parent we need to keep d_move away from it.  Use the
- * dentry's d_lock for this.
- */
-void dnotify_parent(struct dentry *dentry, unsigned long event)
-{
-	struct dentry *parent;
+	rcu_read_lock();
+	f = fcheck(fd);
+	rcu_read_unlock();
 
-	if (!dir_notify_enable)
-		return;
+	/* if (f != filp) means that we lost a race and another task/thread
+	 * actually closed the fd we are still playing with before we grabbed
+	 * the dnotify_mark_mutex and entry->lock.  Since closing the fd is the
+	 * only time we clean up the mark entries we need to get our mark off
+	 * the list. */
+	if (f != filp) {
+		/* if we added ourselves, shoot ourselves, it's possible that
+		 * the flush actually did shoot this entry.  That's fine too
+		 * since multiple calls to destroy_mark is perfectly safe, if
+		 * we found a dnentry already attached to the inode, just sod
+		 * off silently as the flush at close time dealt with it.
+		 */
+		if (dnentry == new_dnentry)
+			destroy = 1;
+		goto out;
+	}
 
-	spin_lock(&dentry->d_lock);
-	parent = dentry->d_parent;
-	if (parent->d_inode->i_dnotify_mask & event) {
-		dget(parent);
-		spin_unlock(&dentry->d_lock);
-		__inode_dir_notify(parent->d_inode, event);
-		dput(parent);
-	} else {
-		spin_unlock(&dentry->d_lock);
+	error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
+	if (error) {
+		/* if we added, we must shoot */
+		if (dnentry == new_dnentry)
+			destroy = 1;
+		goto out;
 	}
+
+	error = attach_dn(dn, dnentry, id, fd, filp, mask);
+	/* !error means that we attached the dn to the dnentry, so don't free it */
+	if (!error)
+		dn = NULL;
+	/* -EEXIST means that we didn't add this new dn and used an old one.
+	 * that isn't an error (and the unused dn should be freed) */
+	else if (error == -EEXIST)
+		error = 0;
+
+	dnotify_recalc_inode_mask(entry);
+out:
+	spin_unlock(&entry->lock);
+
+	if (destroy)
+		fsnotify_destroy_mark_by_entry(entry);
+
+	fsnotify_recalc_group_mask(dnotify_group);
+
+	mutex_unlock(&dnotify_mark_mutex);
+	fsnotify_put_mark(entry);
+out_err:
+	if (new_entry)
+		fsnotify_put_mark(new_entry);
+	if (dn)
+		kmem_cache_free(dnotify_struct_cache, dn);
+	return error;
 }
-EXPORT_SYMBOL_GPL(dnotify_parent);
 
 static int __init dnotify_init(void)
 {
-	dn_cache = kmem_cache_create("dnotify_cache",
-		sizeof(struct dnotify_struct), 0, SLAB_PANIC, NULL);
+	dnotify_struct_cache = KMEM_CACHE(dnotify_struct, SLAB_PANIC);
+	dnotify_mark_entry_cache = KMEM_CACHE(dnotify_mark_entry, SLAB_PANIC);
+
+	dnotify_group = fsnotify_obtain_group(DNOTIFY_GROUP_NUM,
+					      0, &dnotify_fsnotify_ops);
+	if (IS_ERR(dnotify_group))
+		panic("unable to allocate fsnotify group for dnotify\n");
 	return 0;
 }
 
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
new file mode 100644
index 00000000000..ec2f7bd7681
--- /dev/null
+++ b/fs/notify/fsnotify.c
@@ -0,0 +1,186 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dcache.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/srcu.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+/*
+ * Clear all of the marks on an inode when it is being evicted from core
+ */
+void __fsnotify_inode_delete(struct inode *inode)
+{
+	fsnotify_clear_marks_by_inode(inode);
+}
+EXPORT_SYMBOL_GPL(__fsnotify_inode_delete);
+
+/*
+ * Given an inode, first check if we care what happens to our children.  Inotify
+ * and dnotify both tell their parents about events.  If we care about any event
+ * on a child we run all of our children and set a dentry flag saying that the
+ * parent cares.  Thus when an event happens on a child it can quickly tell if
+ * if there is a need to find a parent and send the event to the parent.
+ */
+void __fsnotify_update_child_dentry_flags(struct inode *inode)
+{
+	struct dentry *alias;
+	int watched;
+
+	if (!S_ISDIR(inode->i_mode))
+		return;
+
+	/* determine if the children should tell inode about their events */
+	watched = fsnotify_inode_watches_children(inode);
+
+	spin_lock(&dcache_lock);
+	/* run all of the dentries associated with this inode.  Since this is a
+	 * directory, there damn well better only be one item on this list */
+	list_for_each_entry(alias, &inode->i_dentry, d_alias) {
+		struct dentry *child;
+
+		/* run all of the children of the original inode and fix their
+		 * d_flags to indicate parental interest (their parent is the
+		 * original inode) */
+		list_for_each_entry(child, &alias->d_subdirs, d_u.d_child) {
+			if (!child->d_inode)
+				continue;
+
+			spin_lock(&child->d_lock);
+			if (watched)
+				child->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
+			else
+				child->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
+			spin_unlock(&child->d_lock);
+		}
+	}
+	spin_unlock(&dcache_lock);
+}
+
+/* Notify this dentry's parent about a child's events. */
+void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+{
+	struct dentry *parent;
+	struct inode *p_inode;
+	bool send = false;
+	bool should_update_children = false;
+
+	if (!(dentry->d_flags & DCACHE_FSNOTIFY_PARENT_WATCHED))
+		return;
+
+	spin_lock(&dentry->d_lock);
+	parent = dentry->d_parent;
+	p_inode = parent->d_inode;
+
+	if (fsnotify_inode_watches_children(p_inode)) {
+		if (p_inode->i_fsnotify_mask & mask) {
+			dget(parent);
+			send = true;
+		}
+	} else {
+		/*
+		 * The parent doesn't care about events on it's children but
+		 * at least one child thought it did.  We need to run all the
+		 * children and update their d_flags to let them know p_inode
+		 * doesn't care about them any more.
+		 */
+		dget(parent);
+		should_update_children = true;
+	}
+
+	spin_unlock(&dentry->d_lock);
+
+	if (send) {
+		/* we are notifying a parent so come up with the new mask which
+		 * specifies these are events which came from a child. */
+		mask |= FS_EVENT_ON_CHILD;
+
+		fsnotify(p_inode, mask, dentry->d_inode, FSNOTIFY_EVENT_INODE,
+			 dentry->d_name.name, 0);
+		dput(parent);
+	}
+
+	if (unlikely(should_update_children)) {
+		__fsnotify_update_child_dentry_flags(p_inode);
+		dput(parent);
+	}
+}
+EXPORT_SYMBOL_GPL(__fsnotify_parent);
+
+/*
+ * This is the main call to fsnotify.  The VFS calls into hook specific functions
+ * in linux/fsnotify.h.  Those functions then in turn call here.  Here will call
+ * out to all of the registered fsnotify_group.  Those groups can then use the
+ * notification event in whatever means they feel necessary.
+ */
+void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *file_name, u32 cookie)
+{
+	struct fsnotify_group *group;
+	struct fsnotify_event *event = NULL;
+	int idx;
+	/* global tests shouldn't care about events on child only the specific event */
+	__u32 test_mask = (mask & ~FS_EVENT_ON_CHILD);
+
+	if (list_empty(&fsnotify_groups))
+		return;
+
+	if (!(test_mask & fsnotify_mask))
+		return;
+
+	if (!(test_mask & to_tell->i_fsnotify_mask))
+		return;
+	/*
+	 * SRCU!!  the groups list is very very much read only and the path is
+	 * very hot.  The VAST majority of events are not going to need to do
+	 * anything other than walk the list so it's crazy to pre-allocate.
+	 */
+	idx = srcu_read_lock(&fsnotify_grp_srcu);
+	list_for_each_entry_rcu(group, &fsnotify_groups, group_list) {
+		if (test_mask & group->mask) {
+			if (!group->ops->should_send_event(group, to_tell, mask))
+				continue;
+			if (!event) {
+				event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+				/* shit, we OOM'd and now we can't tell, maybe
+				 * someday someone else will want to do something
+				 * here */
+				if (!event)
+					break;
+			}
+			group->ops->handle_event(group, event);
+		}
+	}
+	srcu_read_unlock(&fsnotify_grp_srcu, idx);
+	/*
+	 * fsnotify_create_event() took a reference so the event can't be cleaned
+	 * up while we are still trying to add it to lists, drop that one.
+	 */
+	if (event)
+		fsnotify_put_event(event);
+}
+EXPORT_SYMBOL_GPL(fsnotify);
+
+static __init int fsnotify_init(void)
+{
+	return init_srcu_struct(&fsnotify_grp_srcu);
+}
+subsys_initcall(fsnotify_init);
diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h
new file mode 100644
index 00000000000..4dc240824b2
--- /dev/null
+++ b/fs/notify/fsnotify.h
@@ -0,0 +1,34 @@
+#ifndef __FS_NOTIFY_FSNOTIFY_H_
+#define __FS_NOTIFY_FSNOTIFY_H_
+
+#include <linux/list.h>
+#include <linux/fsnotify.h>
+#include <linux/srcu.h>
+#include <linux/types.h>
+
+/* protects reads of fsnotify_groups */
+extern struct srcu_struct fsnotify_grp_srcu;
+/* all groups which receive fsnotify events */
+extern struct list_head fsnotify_groups;
+/* all bitwise OR of all event types (FS_*) for all fsnotify_groups */
+extern __u32 fsnotify_mask;
+
+/* destroy all events sitting in this groups notification queue */
+extern void fsnotify_flush_notify(struct fsnotify_group *group);
+
+/* final kfree of a group */
+extern void fsnotify_final_destroy_group(struct fsnotify_group *group);
+
+/* run the list of all marks associated with inode and flag them to be freed */
+extern void fsnotify_clear_marks_by_inode(struct inode *inode);
+/*
+ * update the dentry->d_flags of all of inode's children to indicate if inode cares
+ * about events that happen to its children.
+ */
+extern void __fsnotify_update_child_dentry_flags(struct inode *inode);
+
+/* allocate and destroy and event holder to attach events to notification/access queues */
+extern struct fsnotify_event_holder *fsnotify_alloc_event_holder(void);
+extern void fsnotify_destroy_event_holder(struct fsnotify_event_holder *holder);
+
+#endif	/* __FS_NOTIFY_FSNOTIFY_H_ */
diff --git a/fs/notify/group.c b/fs/notify/group.c
new file mode 100644
index 00000000000..0e1677144bc
--- /dev/null
+++ b/fs/notify/group.c
@@ -0,0 +1,254 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/srcu.h>
+#include <linux/rculist.h>
+#include <linux/wait.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+#include <asm/atomic.h>
+
+/* protects writes to fsnotify_groups and fsnotify_mask */
+static DEFINE_MUTEX(fsnotify_grp_mutex);
+/* protects reads while running the fsnotify_groups list */
+struct srcu_struct fsnotify_grp_srcu;
+/* all groups registered to receive filesystem notifications */
+LIST_HEAD(fsnotify_groups);
+/* bitwise OR of all events (FS_*) interesting to some group on this system */
+__u32 fsnotify_mask;
+
+/*
+ * When a new group registers or changes it's set of interesting events
+ * this function updates the fsnotify_mask to contain all interesting events
+ */
+void fsnotify_recalc_global_mask(void)
+{
+	struct fsnotify_group *group;
+	__u32 mask = 0;
+	int idx;
+
+	idx = srcu_read_lock(&fsnotify_grp_srcu);
+	list_for_each_entry_rcu(group, &fsnotify_groups, group_list)
+		mask |= group->mask;
+	srcu_read_unlock(&fsnotify_grp_srcu, idx);
+	fsnotify_mask = mask;
+}
+
+/*
+ * Update the group->mask by running all of the marks associated with this
+ * group and finding the bitwise | of all of the mark->mask.  If we change
+ * the group->mask we need to update the global mask of events interesting
+ * to the system.
+ */
+void fsnotify_recalc_group_mask(struct fsnotify_group *group)
+{
+	__u32 mask = 0;
+	__u32 old_mask = group->mask;
+	struct fsnotify_mark_entry *entry;
+
+	spin_lock(&group->mark_lock);
+	list_for_each_entry(entry, &group->mark_entries, g_list)
+		mask |= entry->mask;
+	spin_unlock(&group->mark_lock);
+
+	group->mask = mask;
+
+	if (old_mask != mask)
+		fsnotify_recalc_global_mask();
+}
+
+/*
+ * Take a reference to a group so things found under the fsnotify_grp_mutex
+ * can't get freed under us
+ */
+static void fsnotify_get_group(struct fsnotify_group *group)
+{
+	atomic_inc(&group->refcnt);
+}
+
+/*
+ * Final freeing of a group
+ */
+void fsnotify_final_destroy_group(struct fsnotify_group *group)
+{
+	/* clear the notification queue of all events */
+	fsnotify_flush_notify(group);
+
+	if (group->ops->free_group_priv)
+		group->ops->free_group_priv(group);
+
+	kfree(group);
+}
+
+/*
+ * Trying to get rid of a group.  We need to first get rid of any outstanding
+ * allocations and then free the group.  Remember that fsnotify_clear_marks_by_group
+ * could miss marks that are being freed by inode and those marks could still
+ * hold a reference to this group (via group->num_marks)  If we get into that
+ * situtation, the fsnotify_final_destroy_group will get called when that final
+ * mark is freed.
+ */
+static void fsnotify_destroy_group(struct fsnotify_group *group)
+{
+	/* clear all inode mark entries for this group */
+	fsnotify_clear_marks_by_group(group);
+
+	/* past the point of no return, matches the initial value of 1 */
+	if (atomic_dec_and_test(&group->num_marks))
+		fsnotify_final_destroy_group(group);
+}
+
+/*
+ * Remove this group from the global list of groups that will get events
+ * this can be done even if there are still references and things still using
+ * this group.  This just stops the group from getting new events.
+ */
+static void __fsnotify_evict_group(struct fsnotify_group *group)
+{
+	BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
+
+	if (group->on_group_list)
+		list_del_rcu(&group->group_list);
+	group->on_group_list = 0;
+}
+
+/*
+ * Called when a group is no longer interested in getting events.  This can be
+ * used if a group is misbehaving or if for some reason a group should no longer
+ * get any filesystem events.
+ */
+void fsnotify_evict_group(struct fsnotify_group *group)
+{
+	mutex_lock(&fsnotify_grp_mutex);
+	__fsnotify_evict_group(group);
+	mutex_unlock(&fsnotify_grp_mutex);
+}
+
+/*
+ * Drop a reference to a group.  Free it if it's through.
+ */
+void fsnotify_put_group(struct fsnotify_group *group)
+{
+	if (!atomic_dec_and_mutex_lock(&group->refcnt, &fsnotify_grp_mutex))
+		return;
+
+	/*
+	 * OK, now we know that there's no other users *and* we hold mutex,
+	 * so no new references will appear
+	 */
+	__fsnotify_evict_group(group);
+
+	/*
+	 * now it's off the list, so the only thing we might care about is
+	 * srcu access....
+	 */
+	mutex_unlock(&fsnotify_grp_mutex);
+	synchronize_srcu(&fsnotify_grp_srcu);
+
+	/* and now it is really dead. _Nothing_ could be seeing it */
+	fsnotify_recalc_global_mask();
+	fsnotify_destroy_group(group);
+}
+
+/*
+ * Simply run the fsnotify_groups list and find a group which matches
+ * the given parameters.  If a group is found we take a reference to that
+ * group.
+ */
+static struct fsnotify_group *fsnotify_find_group(unsigned int group_num, __u32 mask,
+						  const struct fsnotify_ops *ops)
+{
+	struct fsnotify_group *group_iter;
+	struct fsnotify_group *group = NULL;
+
+	BUG_ON(!mutex_is_locked(&fsnotify_grp_mutex));
+
+	list_for_each_entry_rcu(group_iter, &fsnotify_groups, group_list) {
+		if (group_iter->group_num == group_num) {
+			if ((group_iter->mask == mask) &&
+			    (group_iter->ops == ops)) {
+				fsnotify_get_group(group_iter);
+				group = group_iter;
+			} else
+				group = ERR_PTR(-EEXIST);
+		}
+	}
+	return group;
+}
+
+/*
+ * Either finds an existing group which matches the group_num, mask, and ops or
+ * creates a new group and adds it to the global group list.  In either case we
+ * take a reference for the group returned.
+ */
+struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask,
+					     const struct fsnotify_ops *ops)
+{
+	struct fsnotify_group *group, *tgroup;
+
+	/* very low use, simpler locking if we just always alloc */
+	group = kmalloc(sizeof(struct fsnotify_group), GFP_KERNEL);
+	if (!group)
+		return ERR_PTR(-ENOMEM);
+
+	atomic_set(&group->refcnt, 1);
+
+	group->on_group_list = 0;
+	group->group_num = group_num;
+	group->mask = mask;
+
+	mutex_init(&group->notification_mutex);
+	INIT_LIST_HEAD(&group->notification_list);
+	init_waitqueue_head(&group->notification_waitq);
+	group->q_len = 0;
+	group->max_events = UINT_MAX;
+
+	spin_lock_init(&group->mark_lock);
+	atomic_set(&group->num_marks, 0);
+	INIT_LIST_HEAD(&group->mark_entries);
+
+	group->ops = ops;
+
+	mutex_lock(&fsnotify_grp_mutex);
+	tgroup = fsnotify_find_group(group_num, mask, ops);
+	if (tgroup) {
+		/* group already exists */
+		mutex_unlock(&fsnotify_grp_mutex);
+		/* destroy the new one we made */
+		fsnotify_put_group(group);
+		return tgroup;
+	}
+
+	/* group not found, add a new one */
+	list_add_rcu(&group->group_list, &fsnotify_groups);
+	group->on_group_list = 1;
+	/* being on the fsnotify_groups list holds one num_marks */
+	atomic_inc(&group->num_marks);
+
+	mutex_unlock(&fsnotify_grp_mutex);
+
+	if (mask)
+		fsnotify_recalc_global_mask();
+
+	return group;
+}
diff --git a/fs/notify/inode_mark.c b/fs/notify/inode_mark.c
new file mode 100644
index 00000000000..c8a07c65482
--- /dev/null
+++ b/fs/notify/inode_mark.c
@@ -0,0 +1,426 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * fsnotify inode mark locking/lifetime/and refcnting
+ *
+ * REFCNT:
+ * The mark->refcnt tells how many "things" in the kernel currently are
+ * referencing this object.  The object typically will live inside the kernel
+ * with a refcnt of 2, one for each list it is on (i_list, g_list).  Any task
+ * which can find this object holding the appropriete locks, can take a reference
+ * and the object itself is guarenteed to survive until the reference is dropped.
+ *
+ * LOCKING:
+ * There are 3 spinlocks involved with fsnotify inode marks and they MUST
+ * be taken in order as follows:
+ *
+ * entry->lock
+ * group->mark_lock
+ * inode->i_lock
+ *
+ * entry->lock protects 2 things, entry->group and entry->inode.  You must hold
+ * that lock to dereference either of these things (they could be NULL even with
+ * the lock)
+ *
+ * group->mark_lock protects the mark_entries list anchored inside a given group
+ * and each entry is hooked via the g_list.  It also sorta protects the
+ * free_g_list, which when used is anchored by a private list on the stack of the
+ * task which held the group->mark_lock.
+ *
+ * inode->i_lock protects the i_fsnotify_mark_entries list anchored inside a
+ * given inode and each entry is hooked via the i_list. (and sorta the
+ * free_i_list)
+ *
+ *
+ * LIFETIME:
+ * Inode marks survive between when they are added to an inode and when their
+ * refcnt==0.
+ *
+ * The inode mark can be cleared for a number of different reasons including:
+ * - The inode is unlinked for the last time.  (fsnotify_inode_remove)
+ * - The inode is being evicted from cache. (fsnotify_inode_delete)
+ * - The fs the inode is on is unmounted.  (fsnotify_inode_delete/fsnotify_unmount_inodes)
+ * - Something explicitly requests that it be removed.  (fsnotify_destroy_mark_by_entry)
+ * - The fsnotify_group associated with the mark is going away and all such marks
+ *   need to be cleaned up. (fsnotify_clear_marks_by_group)
+ *
+ * Worst case we are given an inode and need to clean up all the marks on that
+ * inode.  We take i_lock and walk the i_fsnotify_mark_entries safely.  For each
+ * mark on the list we take a reference (so the mark can't disappear under us).
+ * We remove that mark form the inode's list of marks and we add this mark to a
+ * private list anchored on the stack using i_free_list;  At this point we no
+ * longer fear anything finding the mark using the inode's list of marks.
+ *
+ * We can safely and locklessly run the private list on the stack of everything
+ * we just unattached from the original inode.  For each mark on the private list
+ * we grab the mark-> and can thus dereference mark->group and mark->inode.  If
+ * we see the group and inode are not NULL we take those locks.  Now holding all
+ * 3 locks we can completely remove the mark from other tasks finding it in the
+ * future.  Remember, 10 things might already be referencing this mark, but they
+ * better be holding a ref.  We drop our reference we took before we unhooked it
+ * from the inode.  When the ref hits 0 we can free the mark.
+ *
+ * Very similarly for freeing by group, except we use free_g_list.
+ *
+ * This has the very interesting property of being able to run concurrently with
+ * any (or all) other directions.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/writeback.h> /* for inode_lock */
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+void fsnotify_get_mark(struct fsnotify_mark_entry *entry)
+{
+	atomic_inc(&entry->refcnt);
+}
+
+void fsnotify_put_mark(struct fsnotify_mark_entry *entry)
+{
+	if (atomic_dec_and_test(&entry->refcnt))
+		entry->free_mark(entry);
+}
+
+/*
+ * Recalculate the mask of events relevant to a given inode locked.
+ */
+static void fsnotify_recalc_inode_mask_locked(struct inode *inode)
+{
+	struct fsnotify_mark_entry *entry;
+	struct hlist_node *pos;
+	__u32 new_mask = 0;
+
+	assert_spin_locked(&inode->i_lock);
+
+	hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list)
+		new_mask |= entry->mask;
+	inode->i_fsnotify_mask = new_mask;
+}
+
+/*
+ * Recalculate the inode->i_fsnotify_mask, or the mask of all FS_* event types
+ * any notifier is interested in hearing for this inode.
+ */
+void fsnotify_recalc_inode_mask(struct inode *inode)
+{
+	spin_lock(&inode->i_lock);
+	fsnotify_recalc_inode_mask_locked(inode);
+	spin_unlock(&inode->i_lock);
+
+	__fsnotify_update_child_dentry_flags(inode);
+}
+
+/*
+ * Any time a mark is getting freed we end up here.
+ * The caller had better be holding a reference to this mark so we don't actually
+ * do the final put under the entry->lock
+ */
+void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry)
+{
+	struct fsnotify_group *group;
+	struct inode *inode;
+
+	spin_lock(&entry->lock);
+
+	group = entry->group;
+	inode = entry->inode;
+
+	BUG_ON(group && !inode);
+	BUG_ON(!group && inode);
+
+	/* if !group something else already marked this to die */
+	if (!group) {
+		spin_unlock(&entry->lock);
+		return;
+	}
+
+	/* 1 from caller and 1 for being on i_list/g_list */
+	BUG_ON(atomic_read(&entry->refcnt) < 2);
+
+	spin_lock(&group->mark_lock);
+	spin_lock(&inode->i_lock);
+
+	hlist_del_init(&entry->i_list);
+	entry->inode = NULL;
+
+	list_del_init(&entry->g_list);
+	entry->group = NULL;
+
+	fsnotify_put_mark(entry); /* for i_list and g_list */
+
+	/*
+	 * this mark is now off the inode->i_fsnotify_mark_entries list and we
+	 * hold the inode->i_lock, so this is the perfect time to update the
+	 * inode->i_fsnotify_mask
+	 */
+	fsnotify_recalc_inode_mask_locked(inode);
+
+	spin_unlock(&inode->i_lock);
+	spin_unlock(&group->mark_lock);
+	spin_unlock(&entry->lock);
+
+	/*
+	 * Some groups like to know that marks are being freed.  This is a
+	 * callback to the group function to let it know that this entry
+	 * is being freed.
+	 */
+	if (group->ops->freeing_mark)
+		group->ops->freeing_mark(entry, group);
+
+	/*
+	 * __fsnotify_update_child_dentry_flags(inode);
+	 *
+	 * I really want to call that, but we can't, we have no idea if the inode
+	 * still exists the second we drop the entry->lock.
+	 *
+	 * The next time an event arrive to this inode from one of it's children
+	 * __fsnotify_parent will see that the inode doesn't care about it's
+	 * children and will update all of these flags then.  So really this
+	 * is just a lazy update (and could be a perf win...)
+	 */
+
+
+	iput(inode);
+
+	/*
+	 * it's possible that this group tried to destroy itself, but this
+	 * this mark was simultaneously being freed by inode.  If that's the
+	 * case, we finish freeing the group here.
+	 */
+	if (unlikely(atomic_dec_and_test(&group->num_marks)))
+		fsnotify_final_destroy_group(group);
+}
+
+/*
+ * Given a group, destroy all of the marks associated with that group.
+ */
+void fsnotify_clear_marks_by_group(struct fsnotify_group *group)
+{
+	struct fsnotify_mark_entry *lentry, *entry;
+	LIST_HEAD(free_list);
+
+	spin_lock(&group->mark_lock);
+	list_for_each_entry_safe(entry, lentry, &group->mark_entries, g_list) {
+		list_add(&entry->free_g_list, &free_list);
+		list_del_init(&entry->g_list);
+		fsnotify_get_mark(entry);
+	}
+	spin_unlock(&group->mark_lock);
+
+	list_for_each_entry_safe(entry, lentry, &free_list, free_g_list) {
+		fsnotify_destroy_mark_by_entry(entry);
+		fsnotify_put_mark(entry);
+	}
+}
+
+/*
+ * Given an inode, destroy all of the marks associated with that inode.
+ */
+void fsnotify_clear_marks_by_inode(struct inode *inode)
+{
+	struct fsnotify_mark_entry *entry, *lentry;
+	struct hlist_node *pos, *n;
+	LIST_HEAD(free_list);
+
+	spin_lock(&inode->i_lock);
+	hlist_for_each_entry_safe(entry, pos, n, &inode->i_fsnotify_mark_entries, i_list) {
+		list_add(&entry->free_i_list, &free_list);
+		hlist_del_init(&entry->i_list);
+		fsnotify_get_mark(entry);
+	}
+	spin_unlock(&inode->i_lock);
+
+	list_for_each_entry_safe(entry, lentry, &free_list, free_i_list) {
+		fsnotify_destroy_mark_by_entry(entry);
+		fsnotify_put_mark(entry);
+	}
+}
+
+/*
+ * given a group and inode, find the mark associated with that combination.
+ * if found take a reference to that mark and return it, else return NULL
+ */
+struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group,
+						     struct inode *inode)
+{
+	struct fsnotify_mark_entry *entry;
+	struct hlist_node *pos;
+
+	assert_spin_locked(&inode->i_lock);
+
+	hlist_for_each_entry(entry, pos, &inode->i_fsnotify_mark_entries, i_list) {
+		if (entry->group == group) {
+			fsnotify_get_mark(entry);
+			return entry;
+		}
+	}
+	return NULL;
+}
+
+/*
+ * Nothing fancy, just initialize lists and locks and counters.
+ */
+void fsnotify_init_mark(struct fsnotify_mark_entry *entry,
+			void (*free_mark)(struct fsnotify_mark_entry *entry))
+
+{
+	spin_lock_init(&entry->lock);
+	atomic_set(&entry->refcnt, 1);
+	INIT_HLIST_NODE(&entry->i_list);
+	entry->group = NULL;
+	entry->mask = 0;
+	entry->inode = NULL;
+	entry->free_mark = free_mark;
+}
+
+/*
+ * Attach an initialized mark entry to a given group and inode.
+ * These marks may be used for the fsnotify backend to determine which
+ * event types should be delivered to which group and for which inodes.
+ */
+int fsnotify_add_mark(struct fsnotify_mark_entry *entry,
+		      struct fsnotify_group *group, struct inode *inode)
+{
+	struct fsnotify_mark_entry *lentry;
+	int ret = 0;
+
+	inode = igrab(inode);
+	if (unlikely(!inode))
+		return -EINVAL;
+
+	/*
+	 * LOCKING ORDER!!!!
+	 * entry->lock
+	 * group->mark_lock
+	 * inode->i_lock
+	 */
+	spin_lock(&entry->lock);
+	spin_lock(&group->mark_lock);
+	spin_lock(&inode->i_lock);
+
+	entry->group = group;
+	entry->inode = inode;
+
+	lentry = fsnotify_find_mark_entry(group, inode);
+	if (!lentry) {
+		hlist_add_head(&entry->i_list, &inode->i_fsnotify_mark_entries);
+		list_add(&entry->g_list, &group->mark_entries);
+
+		fsnotify_get_mark(entry); /* for i_list and g_list */
+
+		atomic_inc(&group->num_marks);
+
+		fsnotify_recalc_inode_mask_locked(inode);
+	}
+
+	spin_unlock(&inode->i_lock);
+	spin_unlock(&group->mark_lock);
+	spin_unlock(&entry->lock);
+
+	if (lentry) {
+		ret = -EEXIST;
+		iput(inode);
+		fsnotify_put_mark(lentry);
+	} else {
+		__fsnotify_update_child_dentry_flags(inode);
+	}
+
+	return ret;
+}
+
+/**
+ * fsnotify_unmount_inodes - an sb is unmounting.  handle any watched inodes.
+ * @list: list of inodes being unmounted (sb->s_inodes)
+ *
+ * Called with inode_lock held, protecting the unmounting super block's list
+ * of inodes, and with iprune_mutex held, keeping shrink_icache_memory() at bay.
+ * We temporarily drop inode_lock, however, and CAN block.
+ */
+void fsnotify_unmount_inodes(struct list_head *list)
+{
+	struct inode *inode, *next_i, *need_iput = NULL;
+
+	list_for_each_entry_safe(inode, next_i, list, i_sb_list) {
+		struct inode *need_iput_tmp;
+
+		/*
+		 * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
+		 * I_WILL_FREE, or I_NEW which is fine because by that point
+		 * the inode cannot have any associated watches.
+		 */
+		if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
+			continue;
+
+		/*
+		 * If i_count is zero, the inode cannot have any watches and
+		 * doing an __iget/iput with MS_ACTIVE clear would actually
+		 * evict all inodes with zero i_count from icache which is
+		 * unnecessarily violent and may in fact be illegal to do.
+		 */
+		if (!atomic_read(&inode->i_count))
+			continue;
+
+		need_iput_tmp = need_iput;
+		need_iput = NULL;
+
+		/* In case fsnotify_inode_delete() drops a reference. */
+		if (inode != need_iput_tmp)
+			__iget(inode);
+		else
+			need_iput_tmp = NULL;
+
+		/* In case the dropping of a reference would nuke next_i. */
+		if ((&next_i->i_sb_list != list) &&
+		    atomic_read(&next_i->i_count) &&
+		    !(next_i->i_state & (I_CLEAR | I_FREEING | I_WILL_FREE))) {
+			__iget(next_i);
+			need_iput = next_i;
+		}
+
+		/*
+		 * We can safely drop inode_lock here because we hold
+		 * references on both inode and next_i.  Also no new inodes
+		 * will be added since the umount has begun.  Finally,
+		 * iprune_mutex keeps shrink_icache_memory() away.
+		 */
+		spin_unlock(&inode_lock);
+
+		if (need_iput_tmp)
+			iput(need_iput_tmp);
+
+		/* for each watch, send FS_UNMOUNT and then remove it */
+		fsnotify(inode, FS_UNMOUNT, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+
+		fsnotify_inode_delete(inode);
+
+		iput(inode);
+
+		spin_lock(&inode_lock);
+	}
+}
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 44679284102..5356884289a 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -1,26 +1,30 @@
 config INOTIFY
 	bool "Inotify file change notification support"
-	default y
+	default n
 	---help---
-	  Say Y here to enable inotify support.  Inotify is a file change
-	  notification system and a replacement for dnotify.  Inotify fixes
-	  numerous shortcomings in dnotify and introduces several new features
-	  including multiple file events, one-shot support, and unmount
-	  notification.
+	  Say Y here to enable legacy in kernel inotify support.  Inotify is a
+	  file change notification system.  It is a replacement for dnotify.
+	  This option only provides the legacy inotify in kernel API.  There
+	  are no in tree kernel users of this interface since it is deprecated.
+	  You only need this if you are loading an out of tree kernel module
+	  that uses inotify.
 
 	  For more information, see <file:Documentation/filesystems/inotify.txt>
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config INOTIFY_USER
 	bool "Inotify support for userspace"
-	depends on INOTIFY
+	depends on FSNOTIFY
 	default y
 	---help---
 	  Say Y here to enable inotify support for userspace, including the
 	  associated system calls.  Inotify allows monitoring of both files and
 	  directories via a single open fd.  Events are read from the file
 	  descriptor, which is also select()- and poll()-able.
+	  Inotify fixes numerous shortcomings in dnotify and introduces several
+	  new features including multiple file events, one-shot support, and
+	  unmount notification.
 
 	  For more information, see <file:Documentation/filesystems/inotify.txt>
 
diff --git a/fs/notify/inotify/Makefile b/fs/notify/inotify/Makefile
index e290f3bb9d8..94382817136 100644
--- a/fs/notify/inotify/Makefile
+++ b/fs/notify/inotify/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_INOTIFY)		+= inotify.o
-obj-$(CONFIG_INOTIFY_USER)	+= inotify_user.o
+obj-$(CONFIG_INOTIFY_USER)	+= inotify_fsnotify.o inotify_user.o
diff --git a/fs/notify/inotify/inotify.c b/fs/notify/inotify/inotify.c
index 220c13f0d73..40b1cf914cc 100644
--- a/fs/notify/inotify/inotify.c
+++ b/fs/notify/inotify/inotify.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/writeback.h>
 #include <linux/inotify.h>
+#include <linux/fsnotify_backend.h>
 
 static atomic_t inotify_cookie;
 
@@ -905,6 +906,25 @@ EXPORT_SYMBOL_GPL(inotify_rm_watch);
  */
 static int __init inotify_setup(void)
 {
+	BUILD_BUG_ON(IN_ACCESS != FS_ACCESS);
+	BUILD_BUG_ON(IN_MODIFY != FS_MODIFY);
+	BUILD_BUG_ON(IN_ATTRIB != FS_ATTRIB);
+	BUILD_BUG_ON(IN_CLOSE_WRITE != FS_CLOSE_WRITE);
+	BUILD_BUG_ON(IN_CLOSE_NOWRITE != FS_CLOSE_NOWRITE);
+	BUILD_BUG_ON(IN_OPEN != FS_OPEN);
+	BUILD_BUG_ON(IN_MOVED_FROM != FS_MOVED_FROM);
+	BUILD_BUG_ON(IN_MOVED_TO != FS_MOVED_TO);
+	BUILD_BUG_ON(IN_CREATE != FS_CREATE);
+	BUILD_BUG_ON(IN_DELETE != FS_DELETE);
+	BUILD_BUG_ON(IN_DELETE_SELF != FS_DELETE_SELF);
+	BUILD_BUG_ON(IN_MOVE_SELF != FS_MOVE_SELF);
+	BUILD_BUG_ON(IN_Q_OVERFLOW != FS_Q_OVERFLOW);
+
+	BUILD_BUG_ON(IN_UNMOUNT != FS_UNMOUNT);
+	BUILD_BUG_ON(IN_ISDIR != FS_IN_ISDIR);
+	BUILD_BUG_ON(IN_IGNORED != FS_IN_IGNORED);
+	BUILD_BUG_ON(IN_ONESHOT != FS_IN_ONESHOT);
+
 	atomic_set(&inotify_cookie, 0);
 
 	return 0;
diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h
new file mode 100644
index 00000000000..ea2605a58b8
--- /dev/null
+++ b/fs/notify/inotify/inotify.h
@@ -0,0 +1,21 @@
+#include <linux/fsnotify_backend.h>
+#include <linux/inotify.h>
+#include <linux/slab.h> /* struct kmem_cache */
+
+extern struct kmem_cache *event_priv_cachep;
+
+struct inotify_event_private_data {
+	struct fsnotify_event_private_data fsnotify_event_priv_data;
+	int wd;
+};
+
+struct inotify_inode_mark_entry {
+	/* fsnotify_mark_entry MUST be the first thing */
+	struct fsnotify_mark_entry fsn_entry;
+	int wd;
+};
+
+extern void inotify_destroy_mark_entry(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+extern void inotify_free_event_priv(struct fsnotify_event_private_data *event_priv);
+
+extern const struct fsnotify_ops inotify_fsnotify_ops;
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
new file mode 100644
index 00000000000..7ef75b83247
--- /dev/null
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -0,0 +1,138 @@
+/*
+ * fs/inotify_user.c - inotify support for userspace
+ *
+ * Authors:
+ *	John McCutchan	<ttb@tentacle.dhs.org>
+ *	Robert Love	<rml@novell.com>
+ *
+ * Copyright (C) 2005 John McCutchan
+ * Copyright 2006 Hewlett-Packard Development Company, L.P.
+ *
+ * Copyright (C) 2009 Eric Paris <Red Hat Inc>
+ * inotify was largely rewriten to make use of the fsnotify infrastructure
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/fs.h> /* struct inode */
+#include <linux/fsnotify_backend.h>
+#include <linux/inotify.h>
+#include <linux/path.h> /* struct path */
+#include <linux/slab.h> /* kmem_* */
+#include <linux/types.h>
+
+#include "inotify.h"
+
+static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+	struct fsnotify_mark_entry *entry;
+	struct inotify_inode_mark_entry *ientry;
+	struct inode *to_tell;
+	struct inotify_event_private_data *event_priv;
+	struct fsnotify_event_private_data *fsn_event_priv;
+	int wd, ret;
+
+	to_tell = event->to_tell;
+
+	spin_lock(&to_tell->i_lock);
+	entry = fsnotify_find_mark_entry(group, to_tell);
+	spin_unlock(&to_tell->i_lock);
+	/* race with watch removal?  We already passes should_send */
+	if (unlikely(!entry))
+		return 0;
+	ientry = container_of(entry, struct inotify_inode_mark_entry,
+			      fsn_entry);
+	wd = ientry->wd;
+
+	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+	if (unlikely(!event_priv))
+		return -ENOMEM;
+
+	fsn_event_priv = &event_priv->fsnotify_event_priv_data;
+
+	fsn_event_priv->group = group;
+	event_priv->wd = wd;
+
+	ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
+	/* EEXIST is not an error */
+	if (ret == -EEXIST)
+		ret = 0;
+
+	/* did event_priv get attached? */
+	if (list_empty(&fsn_event_priv->event_list))
+		inotify_free_event_priv(fsn_event_priv);
+
+	/*
+	 * If we hold the entry until after the event is on the queue
+	 * IN_IGNORED won't be able to pass this event in the queue
+	 */
+	fsnotify_put_mark(entry);
+
+	return ret;
+}
+
+static void inotify_freeing_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+{
+	inotify_destroy_mark_entry(entry, group);
+}
+
+static bool inotify_should_send_event(struct fsnotify_group *group, struct inode *inode, __u32 mask)
+{
+	struct fsnotify_mark_entry *entry;
+	bool send;
+
+	spin_lock(&inode->i_lock);
+	entry = fsnotify_find_mark_entry(group, inode);
+	spin_unlock(&inode->i_lock);
+	if (!entry)
+		return false;
+
+	mask = (mask & ~FS_EVENT_ON_CHILD);
+	send = (entry->mask & mask);
+
+	/* find took a reference */
+	fsnotify_put_mark(entry);
+
+	return send;
+}
+
+static int idr_callback(int id, void *p, void *data)
+{
+	BUG();
+	return 0;
+}
+
+static void inotify_free_group_priv(struct fsnotify_group *group)
+{
+	/* ideally the idr is empty and we won't hit the BUG in teh callback */
+	idr_for_each(&group->inotify_data.idr, idr_callback, NULL);
+	idr_remove_all(&group->inotify_data.idr);
+	idr_destroy(&group->inotify_data.idr);
+}
+
+void inotify_free_event_priv(struct fsnotify_event_private_data *fsn_event_priv)
+{
+	struct inotify_event_private_data *event_priv;
+
+
+	event_priv = container_of(fsn_event_priv, struct inotify_event_private_data,
+				  fsnotify_event_priv_data);
+
+	kmem_cache_free(event_priv_cachep, event_priv);
+}
+
+const struct fsnotify_ops inotify_fsnotify_ops = {
+	.handle_event = inotify_handle_event,
+	.should_send_event = inotify_should_send_event,
+	.free_group_priv = inotify_free_group_priv,
+	.free_event_priv = inotify_free_event_priv,
+	.freeing_mark = inotify_freeing_mark,
+};
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 1634319e240..982a412ac5b 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -8,6 +8,9 @@
  * Copyright (C) 2005 John McCutchan
  * Copyright 2006 Hewlett-Packard Development Company, L.P.
  *
+ * Copyright (C) 2009 Eric Paris <Red Hat Inc>
+ * inotify was largely rewriten to make use of the fsnotify infrastructure
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
@@ -19,94 +22,48 @@
  * General Public License for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
 #include <linux/file.h>
-#include <linux/mount.h>
-#include <linux/namei.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/list.h>
+#include <linux/fs.h> /* struct inode */
+#include <linux/fsnotify_backend.h>
+#include <linux/idr.h>
+#include <linux/init.h> /* module_init */
 #include <linux/inotify.h>
+#include <linux/kernel.h> /* roundup() */
+#include <linux/magic.h> /* superblock magic number */
+#include <linux/mount.h> /* mntget */
+#include <linux/namei.h> /* LOOKUP_FOLLOW */
+#include <linux/path.h> /* struct path */
+#include <linux/sched.h> /* struct user */
+#include <linux/slab.h> /* struct kmem_cache */
 #include <linux/syscalls.h>
-#include <linux/magic.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
 
-#include <asm/ioctls.h>
+#include "inotify.h"
 
-static struct kmem_cache *watch_cachep __read_mostly;
-static struct kmem_cache *event_cachep __read_mostly;
+#include <asm/ioctls.h>
 
 static struct vfsmount *inotify_mnt __read_mostly;
 
+/* this just sits here and wastes global memory.  used to just pad userspace messages with zeros */
+static struct inotify_event nul_inotify_event;
+
 /* these are configurable via /proc/sys/fs/inotify/ */
 static int inotify_max_user_instances __read_mostly;
-static int inotify_max_user_watches __read_mostly;
 static int inotify_max_queued_events __read_mostly;
+int inotify_max_user_watches __read_mostly;
 
-/*
- * Lock ordering:
- *
- * inotify_dev->up_mutex (ensures we don't re-add the same watch)
- * 	inode->inotify_mutex (protects inode's watch list)
- * 		inotify_handle->mutex (protects inotify_handle's watch list)
- * 			inotify_dev->ev_mutex (protects device's event queue)
- */
+static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
+struct kmem_cache *event_priv_cachep __read_mostly;
+static struct fsnotify_event *inotify_ignored_event;
 
 /*
- * Lifetimes of the main data structures:
- *
- * inotify_device: Lifetime is managed by reference count, from
- * sys_inotify_init() until release.  Additional references can bump the count
- * via get_inotify_dev() and drop the count via put_inotify_dev().
- *
- * inotify_user_watch: Lifetime is from create_watch() to the receipt of an
- * IN_IGNORED event from inotify, or when using IN_ONESHOT, to receipt of the
- * first event, or to inotify_destroy().
+ * When inotify registers a new group it increments this and uses that
+ * value as an offset to set the fsnotify group "name" and priority.
  */
-
-/*
- * struct inotify_device - represents an inotify instance
- *
- * This structure is protected by the mutex 'mutex'.
- */
-struct inotify_device {
-	wait_queue_head_t 	wq;		/* wait queue for i/o */
-	struct mutex		ev_mutex;	/* protects event queue */
-	struct mutex		up_mutex;	/* synchronizes watch updates */
-	struct list_head 	events;		/* list of queued events */
-	struct user_struct	*user;		/* user who opened this dev */
-	struct inotify_handle	*ih;		/* inotify handle */
-	struct fasync_struct    *fa;            /* async notification */
-	atomic_t		count;		/* reference count */
-	unsigned int		queue_size;	/* size of the queue (bytes) */
-	unsigned int		event_count;	/* number of pending events */
-	unsigned int		max_events;	/* maximum number of events */
-};
-
-/*
- * struct inotify_kernel_event - An inotify event, originating from a watch and
- * queued for user-space.  A list of these is attached to each instance of the
- * device.  In read(), this list is walked and all events that can fit in the
- * buffer are returned.
- *
- * Protected by dev->ev_mutex of the device in which we are queued.
- */
-struct inotify_kernel_event {
-	struct inotify_event	event;	/* the user-space event */
-	struct list_head        list;	/* entry in inotify_device's list */
-	char			*name;	/* filename, if any */
-};
-
-/*
- * struct inotify_user_watch - our version of an inotify_watch, we add
- * a reference to the associated inotify_device.
- */
-struct inotify_user_watch {
-	struct inotify_device	*dev;	/* associated device */
-	struct inotify_watch	wdata;	/* inotify watch data */
-};
+static atomic_t inotify_grp_num;
 
 #ifdef CONFIG_SYSCTL
 
@@ -149,280 +106,36 @@ ctl_table inotify_table[] = {
 };
 #endif /* CONFIG_SYSCTL */
 
-static inline void get_inotify_dev(struct inotify_device *dev)
-{
-	atomic_inc(&dev->count);
-}
-
-static inline void put_inotify_dev(struct inotify_device *dev)
-{
-	if (atomic_dec_and_test(&dev->count)) {
-		atomic_dec(&dev->user->inotify_devs);
-		free_uid(dev->user);
-		kfree(dev);
-	}
-}
-
-/*
- * free_inotify_user_watch - cleans up the watch and its references
- */
-static void free_inotify_user_watch(struct inotify_watch *w)
-{
-	struct inotify_user_watch *watch;
-	struct inotify_device *dev;
-
-	watch = container_of(w, struct inotify_user_watch, wdata);
-	dev = watch->dev;
-
-	atomic_dec(&dev->user->inotify_watches);
-	put_inotify_dev(dev);
-	kmem_cache_free(watch_cachep, watch);
-}
-
-/*
- * kernel_event - create a new kernel event with the given parameters
- *
- * This function can sleep.
- */
-static struct inotify_kernel_event * kernel_event(s32 wd, u32 mask, u32 cookie,
-						  const char *name)
-{
-	struct inotify_kernel_event *kevent;
-
-	kevent = kmem_cache_alloc(event_cachep, GFP_NOFS);
-	if (unlikely(!kevent))
-		return NULL;
-
-	/* we hand this out to user-space, so zero it just in case */
-	memset(&kevent->event, 0, sizeof(struct inotify_event));
-
-	kevent->event.wd = wd;
-	kevent->event.mask = mask;
-	kevent->event.cookie = cookie;
-
-	INIT_LIST_HEAD(&kevent->list);
-
-	if (name) {
-		size_t len, rem, event_size = sizeof(struct inotify_event);
-
-		/*
-		 * We need to pad the filename so as to properly align an
-		 * array of inotify_event structures.  Because the structure is
-		 * small and the common case is a small filename, we just round
-		 * up to the next multiple of the structure's sizeof.  This is
-		 * simple and safe for all architectures.
-		 */
-		len = strlen(name) + 1;
-		rem = event_size - len;
-		if (len > event_size) {
-			rem = event_size - (len % event_size);
-			if (len % event_size == 0)
-				rem = 0;
-		}
-
-		kevent->name = kmalloc(len + rem, GFP_NOFS);
-		if (unlikely(!kevent->name)) {
-			kmem_cache_free(event_cachep, kevent);
-			return NULL;
-		}
-		memcpy(kevent->name, name, len);
-		if (rem)
-			memset(kevent->name + len, 0, rem);
-		kevent->event.len = len + rem;
-	} else {
-		kevent->event.len = 0;
-		kevent->name = NULL;
-	}
-
-	return kevent;
-}
-
-/*
- * inotify_dev_get_event - return the next event in the given dev's queue
- *
- * Caller must hold dev->ev_mutex.
- */
-static inline struct inotify_kernel_event *
-inotify_dev_get_event(struct inotify_device *dev)
-{
-	return list_entry(dev->events.next, struct inotify_kernel_event, list);
-}
-
-/*
- * inotify_dev_get_last_event - return the last event in the given dev's queue
- *
- * Caller must hold dev->ev_mutex.
- */
-static inline struct inotify_kernel_event *
-inotify_dev_get_last_event(struct inotify_device *dev)
+static inline __u32 inotify_arg_to_mask(u32 arg)
 {
-	if (list_empty(&dev->events))
-		return NULL;
-	return list_entry(dev->events.prev, struct inotify_kernel_event, list);
-}
+	__u32 mask;
 
-/*
- * inotify_dev_queue_event - event handler registered with core inotify, adds
- * a new event to the given device
- *
- * Can sleep (calls kernel_event()).
- */
-static void inotify_dev_queue_event(struct inotify_watch *w, u32 wd, u32 mask,
-				    u32 cookie, const char *name,
-				    struct inode *ignored)
-{
-	struct inotify_user_watch *watch;
-	struct inotify_device *dev;
-	struct inotify_kernel_event *kevent, *last;
+	/* everything should accept their own ignored and cares about children */
+	mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD);
 
-	watch = container_of(w, struct inotify_user_watch, wdata);
-	dev = watch->dev;
+	/* mask off the flags used to open the fd */
+	mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT));
 
-	mutex_lock(&dev->ev_mutex);
-
-	/* we can safely put the watch as we don't reference it while
-	 * generating the event
-	 */
-	if (mask & IN_IGNORED || w->mask & IN_ONESHOT)
-		put_inotify_watch(w); /* final put */
-
-	/* coalescing: drop this event if it is a dupe of the previous */
-	last = inotify_dev_get_last_event(dev);
-	if (last && last->event.mask == mask && last->event.wd == wd &&
-			last->event.cookie == cookie) {
-		const char *lastname = last->name;
-
-		if (!name && !lastname)
-			goto out;
-		if (name && lastname && !strcmp(lastname, name))
-			goto out;
-	}
-
-	/* the queue overflowed and we already sent the Q_OVERFLOW event */
-	if (unlikely(dev->event_count > dev->max_events))
-		goto out;
-
-	/* if the queue overflows, we need to notify user space */
-	if (unlikely(dev->event_count == dev->max_events))
-		kevent = kernel_event(-1, IN_Q_OVERFLOW, cookie, NULL);
-	else
-		kevent = kernel_event(wd, mask, cookie, name);
-
-	if (unlikely(!kevent))
-		goto out;
-
-	/* queue the event and wake up anyone waiting */
-	dev->event_count++;
-	dev->queue_size += sizeof(struct inotify_event) + kevent->event.len;
-	list_add_tail(&kevent->list, &dev->events);
-	wake_up_interruptible(&dev->wq);
-	kill_fasync(&dev->fa, SIGIO, POLL_IN);
-
-out:
-	mutex_unlock(&dev->ev_mutex);
-}
-
-/*
- * remove_kevent - cleans up the given kevent
- *
- * Caller must hold dev->ev_mutex.
- */
-static void remove_kevent(struct inotify_device *dev,
-			  struct inotify_kernel_event *kevent)
-{
-	list_del(&kevent->list);
-
-	dev->event_count--;
-	dev->queue_size -= sizeof(struct inotify_event) + kevent->event.len;
-}
-
-/*
- * free_kevent - frees the given kevent.
- */
-static void free_kevent(struct inotify_kernel_event *kevent)
-{
-	kfree(kevent->name);
-	kmem_cache_free(event_cachep, kevent);
-}
-
-/*
- * inotify_dev_event_dequeue - destroy an event on the given device
- *
- * Caller must hold dev->ev_mutex.
- */
-static void inotify_dev_event_dequeue(struct inotify_device *dev)
-{
-	if (!list_empty(&dev->events)) {
-		struct inotify_kernel_event *kevent;
-		kevent = inotify_dev_get_event(dev);
-		remove_kevent(dev, kevent);
-		free_kevent(kevent);
-	}
-}
-
-/*
- * find_inode - resolve a user-given path to a specific inode
- */
-static int find_inode(const char __user *dirname, struct path *path,
-		      unsigned flags)
-{
-	int error;
-
-	error = user_path_at(AT_FDCWD, dirname, flags, path);
-	if (error)
-		return error;
-	/* you can only watch an inode if you have read permissions on it */
-	error = inode_permission(path->dentry->d_inode, MAY_READ);
-	if (error)
-		path_put(path);
-	return error;
+	return mask;
 }
 
-/*
- * create_watch - creates a watch on the given device.
- *
- * Callers must hold dev->up_mutex.
- */
-static int create_watch(struct inotify_device *dev, struct inode *inode,
-			u32 mask)
+static inline u32 inotify_mask_to_arg(__u32 mask)
 {
-	struct inotify_user_watch *watch;
-	int ret;
-
-	if (atomic_read(&dev->user->inotify_watches) >=
-			inotify_max_user_watches)
-		return -ENOSPC;
-
-	watch = kmem_cache_alloc(watch_cachep, GFP_KERNEL);
-	if (unlikely(!watch))
-		return -ENOMEM;
-
-	/* save a reference to device and bump the count to make it official */
-	get_inotify_dev(dev);
-	watch->dev = dev;
-
-	atomic_inc(&dev->user->inotify_watches);
-
-	inotify_init_watch(&watch->wdata);
-	ret = inotify_add_watch(dev->ih, &watch->wdata, inode, mask);
-	if (ret < 0)
-		free_inotify_user_watch(&watch->wdata);
-
-	return ret;
+	return mask & (IN_ALL_EVENTS | IN_ISDIR | IN_UNMOUNT | IN_IGNORED |
+		       IN_Q_OVERFLOW);
 }
 
-/* Device Interface */
-
+/* intofiy userspace file descriptor functions */
 static unsigned int inotify_poll(struct file *file, poll_table *wait)
 {
-	struct inotify_device *dev = file->private_data;
+	struct fsnotify_group *group = file->private_data;
 	int ret = 0;
 
-	poll_wait(file, &dev->wq, wait);
-	mutex_lock(&dev->ev_mutex);
-	if (!list_empty(&dev->events))
+	poll_wait(file, &group->notification_waitq, wait);
+	mutex_lock(&group->notification_mutex);
+	if (!fsnotify_notify_queue_is_empty(group))
 		ret = POLLIN | POLLRDNORM;
-	mutex_unlock(&dev->ev_mutex);
+	mutex_unlock(&group->notification_mutex);
 
 	return ret;
 }
@@ -432,26 +145,29 @@ static unsigned int inotify_poll(struct file *file, poll_table *wait)
  * enough to fit in "count". Return an error pointer if
  * not large enough.
  *
- * Called with the device ev_mutex held.
+ * Called with the group->notification_mutex held.
  */
-static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
-						  size_t count)
+static struct fsnotify_event *get_one_event(struct fsnotify_group *group,
+					    size_t count)
 {
 	size_t event_size = sizeof(struct inotify_event);
-	struct inotify_kernel_event *kevent;
+	struct fsnotify_event *event;
 
-	if (list_empty(&dev->events))
+	if (fsnotify_notify_queue_is_empty(group))
 		return NULL;
 
-	kevent = inotify_dev_get_event(dev);
-	if (kevent->name)
-		event_size += kevent->event.len;
+	event = fsnotify_peek_notify_event(group);
+
+	event_size += roundup(event->name_len, event_size);
 
 	if (event_size > count)
 		return ERR_PTR(-EINVAL);
 
-	remove_kevent(dev, kevent);
-	return kevent;
+	/* held the notification_mutex the whole time, so this is the
+	 * same event we peeked above */
+	fsnotify_remove_notify_event(group);
+
+	return event;
 }
 
 /*
@@ -460,51 +176,90 @@ static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
  * We already checked that the event size is smaller than the
  * buffer we had in "get_one_event()" above.
  */
-static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent,
+static ssize_t copy_event_to_user(struct fsnotify_group *group,
+				  struct fsnotify_event *event,
 				  char __user *buf)
 {
+	struct inotify_event inotify_event;
+	struct fsnotify_event_private_data *fsn_priv;
+	struct inotify_event_private_data *priv;
 	size_t event_size = sizeof(struct inotify_event);
+	size_t name_len;
+
+	/* we get the inotify watch descriptor from the event private data */
+	spin_lock(&event->lock);
+	fsn_priv = fsnotify_remove_priv_from_event(group, event);
+	spin_unlock(&event->lock);
+
+	if (!fsn_priv)
+		inotify_event.wd = -1;
+	else {
+		priv = container_of(fsn_priv, struct inotify_event_private_data,
+				    fsnotify_event_priv_data);
+		inotify_event.wd = priv->wd;
+		inotify_free_event_priv(fsn_priv);
+	}
+
+	/* round up event->name_len so it is a multiple of event_size */
+	name_len = roundup(event->name_len, event_size);
+	inotify_event.len = name_len;
+
+	inotify_event.mask = inotify_mask_to_arg(event->mask);
+	inotify_event.cookie = event->sync_cookie;
 
-	if (copy_to_user(buf, &kevent->event, event_size))
+	/* send the main event */
+	if (copy_to_user(buf, &inotify_event, event_size))
 		return -EFAULT;
 
-	if (kevent->name) {
-		buf += event_size;
+	buf += event_size;
 
-		if (copy_to_user(buf, kevent->name, kevent->event.len))
+	/*
+	 * fsnotify only stores the pathname, so here we have to send the pathname
+	 * and then pad that pathname out to a multiple of sizeof(inotify_event)
+	 * with zeros.  I get my zeros from the nul_inotify_event.
+	 */
+	if (name_len) {
+		unsigned int len_to_zero = name_len - event->name_len;
+		/* copy the path name */
+		if (copy_to_user(buf, event->file_name, event->name_len))
 			return -EFAULT;
+		buf += event->name_len;
 
-		event_size += kevent->event.len;
+		/* fill userspace with 0's from nul_inotify_event */
+		if (copy_to_user(buf, &nul_inotify_event, len_to_zero))
+			return -EFAULT;
+		buf += len_to_zero;
+		event_size += name_len;
 	}
+
 	return event_size;
 }
 
 static ssize_t inotify_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *pos)
 {
-	struct inotify_device *dev;
+	struct fsnotify_group *group;
+	struct fsnotify_event *kevent;
 	char __user *start;
 	int ret;
 	DEFINE_WAIT(wait);
 
 	start = buf;
-	dev = file->private_data;
+	group = file->private_data;
 
 	while (1) {
-		struct inotify_kernel_event *kevent;
+		prepare_to_wait(&group->notification_waitq, &wait, TASK_INTERRUPTIBLE);
 
-		prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
-
-		mutex_lock(&dev->ev_mutex);
-		kevent = get_one_event(dev, count);
-		mutex_unlock(&dev->ev_mutex);
+		mutex_lock(&group->notification_mutex);
+		kevent = get_one_event(group, count);
+		mutex_unlock(&group->notification_mutex);
 
 		if (kevent) {
 			ret = PTR_ERR(kevent);
 			if (IS_ERR(kevent))
 				break;
-			ret = copy_event_to_user(kevent, buf);
-			free_kevent(kevent);
+			ret = copy_event_to_user(group, kevent, buf);
+			fsnotify_put_event(kevent);
 			if (ret < 0)
 				break;
 			buf += ret;
@@ -525,7 +280,7 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 		schedule();
 	}
 
-	finish_wait(&dev->wq, &wait);
+	finish_wait(&group->notification_waitq, &wait);
 	if (start != buf && ret != -EFAULT)
 		ret = buf - start;
 	return ret;
@@ -533,25 +288,19 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 
 static int inotify_fasync(int fd, struct file *file, int on)
 {
-	struct inotify_device *dev = file->private_data;
+	struct fsnotify_group *group = file->private_data;
 
-	return fasync_helper(fd, file, on, &dev->fa) >= 0 ? 0 : -EIO;
+	return fasync_helper(fd, file, on, &group->inotify_data.fa) >= 0 ? 0 : -EIO;
 }
 
 static int inotify_release(struct inode *ignored, struct file *file)
 {
-	struct inotify_device *dev = file->private_data;
-
-	inotify_destroy(dev->ih);
+	struct fsnotify_group *group = file->private_data;
 
-	/* destroy all of the events on this device */
-	mutex_lock(&dev->ev_mutex);
-	while (!list_empty(&dev->events))
-		inotify_dev_event_dequeue(dev);
-	mutex_unlock(&dev->ev_mutex);
+	fsnotify_clear_marks_by_group(group);
 
-	/* free this device: the put matching the get in inotify_init() */
-	put_inotify_dev(dev);
+	/* free this group, matching get was inotify_init->fsnotify_obtain_group */
+	fsnotify_put_group(group);
 
 	return 0;
 }
@@ -559,16 +308,27 @@ static int inotify_release(struct inode *ignored, struct file *file)
 static long inotify_ioctl(struct file *file, unsigned int cmd,
 			  unsigned long arg)
 {
-	struct inotify_device *dev;
+	struct fsnotify_group *group;
+	struct fsnotify_event_holder *holder;
+	struct fsnotify_event *event;
 	void __user *p;
 	int ret = -ENOTTY;
+	size_t send_len = 0;
 
-	dev = file->private_data;
+	group = file->private_data;
 	p = (void __user *) arg;
 
 	switch (cmd) {
 	case FIONREAD:
-		ret = put_user(dev->queue_size, (int __user *) p);
+		mutex_lock(&group->notification_mutex);
+		list_for_each_entry(holder, &group->notification_list, event_list) {
+			event = holder->event;
+			send_len += sizeof(struct inotify_event);
+			send_len += roundup(event->name_len,
+					     sizeof(struct inotify_event));
+		}
+		mutex_unlock(&group->notification_mutex);
+		ret = put_user(send_len, (int __user *) p);
 		break;
 	}
 
@@ -576,23 +336,233 @@ static long inotify_ioctl(struct file *file, unsigned int cmd,
 }
 
 static const struct file_operations inotify_fops = {
-	.poll           = inotify_poll,
-	.read           = inotify_read,
-	.fasync         = inotify_fasync,
-	.release        = inotify_release,
-	.unlocked_ioctl = inotify_ioctl,
+	.poll		= inotify_poll,
+	.read		= inotify_read,
+	.fasync		= inotify_fasync,
+	.release	= inotify_release,
+	.unlocked_ioctl	= inotify_ioctl,
 	.compat_ioctl	= inotify_ioctl,
 };
 
-static const struct inotify_operations inotify_user_ops = {
-	.handle_event	= inotify_dev_queue_event,
-	.destroy_watch	= free_inotify_user_watch,
-};
 
+/*
+ * find_inode - resolve a user-given path to a specific inode
+ */
+static int inotify_find_inode(const char __user *dirname, struct path *path, unsigned flags)
+{
+	int error;
+
+	error = user_path_at(AT_FDCWD, dirname, flags, path);
+	if (error)
+		return error;
+	/* you can only watch an inode if you have read permissions on it */
+	error = inode_permission(path->dentry->d_inode, MAY_READ);
+	if (error)
+		path_put(path);
+	return error;
+}
+
+/*
+ * When, for whatever reason, inotify is done with a mark (or what used to be a
+ * watch) we need to remove that watch from the idr and we need to send IN_IGNORED
+ * for the given wd.
+ *
+ * There is a bit of recursion here.  The loop looks like:
+ * 	inotify_destroy_mark_entry -> fsnotify_destroy_mark_by_entry ->
+ *	inotify_freeing_mark -> inotify_destory_mark_entry -> restart
+ * But the loop is broken in 2 places.  fsnotify_destroy_mark_by_entry sets
+ * entry->group = NULL before the call to inotify_freeing_mark, so the if (egroup)
+ * test below will not call back to fsnotify again.  But even if that test wasn't
+ * there this would still be safe since fsnotify_destroy_mark_by_entry() is
+ * safe from recursion.
+ */
+void inotify_destroy_mark_entry(struct fsnotify_mark_entry *entry, struct fsnotify_group *group)
+{
+	struct inotify_inode_mark_entry *ientry;
+	struct inotify_event_private_data *event_priv;
+	struct fsnotify_event_private_data *fsn_event_priv;
+	struct fsnotify_group *egroup;
+	struct idr *idr;
+
+	spin_lock(&entry->lock);
+	egroup = entry->group;
+
+	/* if egroup we aren't really done and something might still send events
+	 * for this inode, on the callback we'll send the IN_IGNORED */
+	if (egroup) {
+		spin_unlock(&entry->lock);
+		fsnotify_destroy_mark_by_entry(entry);
+		return;
+	}
+	spin_unlock(&entry->lock);
+
+	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+
+	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+	if (unlikely(!event_priv))
+		goto skip_send_ignore;
+
+	fsn_event_priv = &event_priv->fsnotify_event_priv_data;
+
+	fsn_event_priv->group = group;
+	event_priv->wd = ientry->wd;
+
+	fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
+
+	/* did the private data get added? */
+	if (list_empty(&fsn_event_priv->event_list))
+		inotify_free_event_priv(fsn_event_priv);
+
+skip_send_ignore:
+
+	/* remove this entry from the idr */
+	spin_lock(&group->inotify_data.idr_lock);
+	idr = &group->inotify_data.idr;
+	idr_remove(idr, ientry->wd);
+	spin_unlock(&group->inotify_data.idr_lock);
+
+	/* removed from idr, drop that reference */
+	fsnotify_put_mark(entry);
+}
+
+/* ding dong the mark is dead */
+static void inotify_free_mark(struct fsnotify_mark_entry *entry)
+{
+	struct inotify_inode_mark_entry *ientry = (struct inotify_inode_mark_entry *)entry;
+
+	kmem_cache_free(inotify_inode_mark_cachep, ientry);
+}
+
+static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+{
+	struct fsnotify_mark_entry *entry = NULL;
+	struct inotify_inode_mark_entry *ientry;
+	int ret = 0;
+	int add = (arg & IN_MASK_ADD);
+	__u32 mask;
+	__u32 old_mask, new_mask;
+
+	/* don't allow invalid bits: we don't want flags set */
+	mask = inotify_arg_to_mask(arg);
+	if (unlikely(!mask))
+		return -EINVAL;
+
+	ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+	if (unlikely(!ientry))
+		return -ENOMEM;
+	/* we set the mask at the end after attaching it */
+	fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
+	ientry->wd = 0;
+
+find_entry:
+	spin_lock(&inode->i_lock);
+	entry = fsnotify_find_mark_entry(group, inode);
+	spin_unlock(&inode->i_lock);
+	if (entry) {
+		kmem_cache_free(inotify_inode_mark_cachep, ientry);
+		ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+	} else {
+		if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
+			ret = -ENOSPC;
+			goto out_err;
+		}
+
+		ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
+		if (ret == -EEXIST)
+			goto find_entry;
+		else if (ret)
+			goto out_err;
+
+		entry = &ientry->fsn_entry;
+retry:
+		ret = -ENOMEM;
+		if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
+			goto out_err;
+
+		spin_lock(&group->inotify_data.idr_lock);
+		/* if entry is added to the idr we keep the reference obtained
+		 * through fsnotify_mark_add.  remember to drop this reference
+		 * when entry is removed from idr */
+		ret = idr_get_new_above(&group->inotify_data.idr, entry,
+					++group->inotify_data.last_wd,
+					&ientry->wd);
+		spin_unlock(&group->inotify_data.idr_lock);
+		if (ret) {
+			if (ret == -EAGAIN)
+				goto retry;
+			goto out_err;
+		}
+		atomic_inc(&group->inotify_data.user->inotify_watches);
+	}
+
+	spin_lock(&entry->lock);
+
+	old_mask = entry->mask;
+	if (add) {
+		entry->mask |= mask;
+		new_mask = entry->mask;
+	} else {
+		entry->mask = mask;
+		new_mask = entry->mask;
+	}
+
+	spin_unlock(&entry->lock);
+
+	if (old_mask != new_mask) {
+		/* more bits in old than in new? */
+		int dropped = (old_mask & ~new_mask);
+		/* more bits in this entry than the inode's mask? */
+		int do_inode = (new_mask & ~inode->i_fsnotify_mask);
+		/* more bits in this entry than the group? */
+		int do_group = (new_mask & ~group->mask);
+
+		/* update the inode with this new entry */
+		if (dropped || do_inode)
+			fsnotify_recalc_inode_mask(inode);
+
+		/* update the group mask with the new mask */
+		if (dropped || do_group)
+			fsnotify_recalc_group_mask(group);
+	}
+
+	return ientry->wd;
+
+out_err:
+	/* see this isn't supposed to happen, just kill the watch */
+	if (entry) {
+		fsnotify_destroy_mark_by_entry(entry);
+		fsnotify_put_mark(entry);
+	}
+	return ret;
+}
+
+static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events)
+{
+	struct fsnotify_group *group;
+	unsigned int grp_num;
+
+	/* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
+	grp_num = (INOTIFY_GROUP_NUM - atomic_inc_return(&inotify_grp_num));
+	group = fsnotify_obtain_group(grp_num, 0, &inotify_fsnotify_ops);
+	if (IS_ERR(group))
+		return group;
+
+	group->max_events = max_events;
+
+	spin_lock_init(&group->inotify_data.idr_lock);
+	idr_init(&group->inotify_data.idr);
+	group->inotify_data.last_wd = 0;
+	group->inotify_data.user = user;
+	group->inotify_data.fa = NULL;
+
+	return group;
+}
+
+
+/* inotify syscalls */
 SYSCALL_DEFINE1(inotify_init1, int, flags)
 {
-	struct inotify_device *dev;
-	struct inotify_handle *ih;
+	struct fsnotify_group *group;
 	struct user_struct *user;
 	struct file *filp;
 	int fd, ret;
@@ -621,45 +591,27 @@ SYSCALL_DEFINE1(inotify_init1, int, flags)
 		goto out_free_uid;
 	}
 
-	dev = kmalloc(sizeof(struct inotify_device), GFP_KERNEL);
-	if (unlikely(!dev)) {
-		ret = -ENOMEM;
+	/* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
+	group = inotify_new_group(user, inotify_max_queued_events);
+	if (IS_ERR(group)) {
+		ret = PTR_ERR(group);
 		goto out_free_uid;
 	}
 
-	ih = inotify_init(&inotify_user_ops);
-	if (IS_ERR(ih)) {
-		ret = PTR_ERR(ih);
-		goto out_free_dev;
-	}
-	dev->ih = ih;
-	dev->fa = NULL;
-
 	filp->f_op = &inotify_fops;
 	filp->f_path.mnt = mntget(inotify_mnt);
 	filp->f_path.dentry = dget(inotify_mnt->mnt_root);
 	filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
 	filp->f_mode = FMODE_READ;
 	filp->f_flags = O_RDONLY | (flags & O_NONBLOCK);
-	filp->private_data = dev;
-
-	INIT_LIST_HEAD(&dev->events);
-	init_waitqueue_head(&dev->wq);
-	mutex_init(&dev->ev_mutex);
-	mutex_init(&dev->up_mutex);
-	dev->event_count = 0;
-	dev->queue_size = 0;
-	dev->max_events = inotify_max_queued_events;
-	dev->user = user;
-	atomic_set(&dev->count, 0);
-
-	get_inotify_dev(dev);
+	filp->private_data = group;
+
 	atomic_inc(&user->inotify_devs);
+
 	fd_install(fd, filp);
 
 	return fd;
-out_free_dev:
-	kfree(dev);
+
 out_free_uid:
 	free_uid(user);
 	put_filp(filp);
@@ -676,8 +628,8 @@ SYSCALL_DEFINE0(inotify_init)
 SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
 		u32, mask)
 {
+	struct fsnotify_group *group;
 	struct inode *inode;
-	struct inotify_device *dev;
 	struct path path;
 	struct file *filp;
 	int ret, fput_needed;
@@ -698,20 +650,20 @@ SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
 	if (mask & IN_ONLYDIR)
 		flags |= LOOKUP_DIRECTORY;
 
-	ret = find_inode(pathname, &path, flags);
-	if (unlikely(ret))
+	ret = inotify_find_inode(pathname, &path, flags);
+	if (ret)
 		goto fput_and_out;
 
-	/* inode held in place by reference to path; dev by fget on fd */
+	/* inode held in place by reference to path; group by fget on fd */
 	inode = path.dentry->d_inode;
-	dev = filp->private_data;
+	group = filp->private_data;
 
-	mutex_lock(&dev->up_mutex);
-	ret = inotify_find_update_watch(dev->ih, inode, mask);
-	if (ret == -ENOENT)
-		ret = create_watch(dev, inode, mask);
-	mutex_unlock(&dev->up_mutex);
+	/* create/update an inode mark */
+	ret = inotify_update_watch(group, inode, mask);
+	if (unlikely(ret))
+		goto path_put_and_out;
 
+path_put_and_out:
 	path_put(&path);
 fput_and_out:
 	fput_light(filp, fput_needed);
@@ -720,9 +672,10 @@ fput_and_out:
 
 SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 {
+	struct fsnotify_group *group;
+	struct fsnotify_mark_entry *entry;
 	struct file *filp;
-	struct inotify_device *dev;
-	int ret, fput_needed;
+	int ret = 0, fput_needed;
 
 	filp = fget_light(fd, &fput_needed);
 	if (unlikely(!filp))
@@ -734,10 +687,20 @@ SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 		goto out;
 	}
 
-	dev = filp->private_data;
+	group = filp->private_data;
 
-	/* we free our watch data when we get IN_IGNORED */
-	ret = inotify_rm_wd(dev->ih, wd);
+	spin_lock(&group->inotify_data.idr_lock);
+	entry = idr_find(&group->inotify_data.idr, wd);
+	if (unlikely(!entry)) {
+		spin_unlock(&group->inotify_data.idr_lock);
+		ret = -EINVAL;
+		goto out;
+	}
+	fsnotify_get_mark(entry);
+	spin_unlock(&group->inotify_data.idr_lock);
+
+	inotify_destroy_mark_entry(entry, group);
+	fsnotify_put_mark(entry);
 
 out:
 	fput_light(filp, fput_needed);
@@ -753,9 +716,9 @@ inotify_get_sb(struct file_system_type *fs_type, int flags,
 }
 
 static struct file_system_type inotify_fs_type = {
-    .name           = "inotifyfs",
-    .get_sb         = inotify_get_sb,
-    .kill_sb        = kill_anon_super,
+    .name	= "inotifyfs",
+    .get_sb	= inotify_get_sb,
+    .kill_sb	= kill_anon_super,
 };
 
 /*
@@ -775,18 +738,16 @@ static int __init inotify_user_setup(void)
 	if (IS_ERR(inotify_mnt))
 		panic("inotify: kern_mount ret %ld!\n", PTR_ERR(inotify_mnt));
 
+	inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
+	event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
+	inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
+	if (!inotify_ignored_event)
+		panic("unable to allocate the inotify ignored event\n");
+
 	inotify_max_queued_events = 16384;
 	inotify_max_user_instances = 128;
 	inotify_max_user_watches = 8192;
 
-	watch_cachep = kmem_cache_create("inotify_watch_cache",
-					 sizeof(struct inotify_user_watch),
-					 0, SLAB_PANIC, NULL);
-	event_cachep = kmem_cache_create("inotify_event_cache",
-					 sizeof(struct inotify_kernel_event),
-					 0, SLAB_PANIC, NULL);
-
 	return 0;
 }
-
 module_init(inotify_user_setup);
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
new file mode 100644
index 00000000000..959b73e756f
--- /dev/null
+++ b/fs/notify/notification.c
@@ -0,0 +1,411 @@
+/*
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Basic idea behind the notification queue: An fsnotify group (like inotify)
+ * sends the userspace notification about events asyncronously some time after
+ * the event happened.  When inotify gets an event it will need to add that
+ * event to the group notify queue.  Since a single event might need to be on
+ * multiple group's notification queues we can't add the event directly to each
+ * queue and instead add a small "event_holder" to each queue.  This event_holder
+ * has a pointer back to the original event.  Since the majority of events are
+ * going to end up on one, and only one, notification queue we embed one
+ * event_holder into each event.  This means we have a single allocation instead
+ * of always needing two.  If the embedded event_holder is already in use by
+ * another group a new event_holder (from fsnotify_event_holder_cachep) will be
+ * allocated and used.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/mutex.h>
+#include <linux/namei.h>
+#include <linux/path.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/atomic.h>
+
+#include <linux/fsnotify_backend.h>
+#include "fsnotify.h"
+
+static struct kmem_cache *fsnotify_event_cachep;
+static struct kmem_cache *fsnotify_event_holder_cachep;
+/*
+ * This is a magic event we send when the q is too full.  Since it doesn't
+ * hold real event information we just keep one system wide and use it any time
+ * it is needed.  It's refcnt is set 1 at kernel init time and will never
+ * get set to 0 so it will never get 'freed'
+ */
+static struct fsnotify_event q_overflow_event;
+static atomic_t fsnotify_sync_cookie = ATOMIC_INIT(0);
+
+/**
+ * fsnotify_get_cookie - return a unique cookie for use in synchronizing events.
+ * Called from fsnotify_move, which is inlined into filesystem modules.
+ */
+u32 fsnotify_get_cookie(void)
+{
+	return atomic_inc_return(&fsnotify_sync_cookie);
+}
+EXPORT_SYMBOL_GPL(fsnotify_get_cookie);
+
+/* return true if the notify queue is empty, false otherwise */
+bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group)
+{
+	BUG_ON(!mutex_is_locked(&group->notification_mutex));
+	return list_empty(&group->notification_list) ? true : false;
+}
+
+void fsnotify_get_event(struct fsnotify_event *event)
+{
+	atomic_inc(&event->refcnt);
+}
+
+void fsnotify_put_event(struct fsnotify_event *event)
+{
+	if (!event)
+		return;
+
+	if (atomic_dec_and_test(&event->refcnt)) {
+		if (event->data_type == FSNOTIFY_EVENT_PATH)
+			path_put(&event->path);
+
+		BUG_ON(!list_empty(&event->private_data_list));
+
+		kfree(event->file_name);
+		kmem_cache_free(fsnotify_event_cachep, event);
+	}
+}
+
+struct fsnotify_event_holder *fsnotify_alloc_event_holder(void)
+{
+	return kmem_cache_alloc(fsnotify_event_holder_cachep, GFP_KERNEL);
+}
+
+void fsnotify_destroy_event_holder(struct fsnotify_event_holder *holder)
+{
+	kmem_cache_free(fsnotify_event_holder_cachep, holder);
+}
+
+/*
+ * Find the private data that the group previously attached to this event when
+ * the group added the event to the notification queue (fsnotify_add_notify_event)
+ */
+struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group, struct fsnotify_event *event)
+{
+	struct fsnotify_event_private_data *lpriv;
+	struct fsnotify_event_private_data *priv = NULL;
+
+	assert_spin_locked(&event->lock);
+
+	list_for_each_entry(lpriv, &event->private_data_list, event_list) {
+		if (lpriv->group == group) {
+			priv = lpriv;
+			list_del(&priv->event_list);
+			break;
+		}
+	}
+	return priv;
+}
+
+/*
+ * Check if 2 events contain the same information.  We do not compare private data
+ * but at this moment that isn't a problem for any know fsnotify listeners.
+ */
+static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new)
+{
+	if ((old->mask == new->mask) &&
+	    (old->to_tell == new->to_tell) &&
+	    (old->data_type == new->data_type)) {
+		switch (old->data_type) {
+		case (FSNOTIFY_EVENT_INODE):
+			if (old->inode == new->inode)
+				return true;
+			break;
+		case (FSNOTIFY_EVENT_PATH):
+			if ((old->path.mnt == new->path.mnt) &&
+			    (old->path.dentry == new->path.dentry))
+				return true;
+		case (FSNOTIFY_EVENT_NONE):
+			return true;
+		};
+	}
+	return false;
+}
+
+/*
+ * Add an event to the group notification queue.  The group can later pull this
+ * event off the queue to deal with.  If the event is successfully added to the
+ * group's notification queue, a reference is taken on event.
+ */
+int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
+			      struct fsnotify_event_private_data *priv)
+{
+	struct fsnotify_event_holder *holder = NULL;
+	struct list_head *list = &group->notification_list;
+	struct fsnotify_event_holder *last_holder;
+	struct fsnotify_event *last_event;
+
+	/* easy to tell if priv was attached to the event */
+	INIT_LIST_HEAD(&priv->event_list);
+
+	/*
+	 * There is one fsnotify_event_holder embedded inside each fsnotify_event.
+	 * Check if we expect to be able to use that holder.  If not alloc a new
+	 * holder.
+	 * For the overflow event it's possible that something will use the in
+	 * event holder before we get the lock so we may need to jump back and
+	 * alloc a new holder, this can't happen for most events...
+	 */
+	if (!list_empty(&event->holder.event_list)) {
+alloc_holder:
+		holder = fsnotify_alloc_event_holder();
+		if (!holder)
+			return -ENOMEM;
+	}
+
+	mutex_lock(&group->notification_mutex);
+
+	if (group->q_len >= group->max_events) {
+		event = &q_overflow_event;
+		/* sorry, no private data on the overflow event */
+		priv = NULL;
+	}
+
+	spin_lock(&event->lock);
+
+	if (list_empty(&event->holder.event_list)) {
+		if (unlikely(holder))
+			fsnotify_destroy_event_holder(holder);
+		holder = &event->holder;
+	} else if (unlikely(!holder)) {
+		/* between the time we checked above and got the lock the in
+		 * event holder was used, go back and get a new one */
+		spin_unlock(&event->lock);
+		mutex_unlock(&group->notification_mutex);
+		goto alloc_holder;
+	}
+
+	if (!list_empty(list)) {
+		last_holder = list_entry(list->prev, struct fsnotify_event_holder, event_list);
+		last_event = last_holder->event;
+		if (event_compare(last_event, event)) {
+			spin_unlock(&event->lock);
+			mutex_unlock(&group->notification_mutex);
+			if (holder != &event->holder)
+				fsnotify_destroy_event_holder(holder);
+			return -EEXIST;
+		}
+	}
+
+	group->q_len++;
+	holder->event = event;
+
+	fsnotify_get_event(event);
+	list_add_tail(&holder->event_list, list);
+	if (priv)
+		list_add_tail(&priv->event_list, &event->private_data_list);
+	spin_unlock(&event->lock);
+	mutex_unlock(&group->notification_mutex);
+
+	wake_up(&group->notification_waitq);
+	return 0;
+}
+
+/*
+ * Remove and return the first event from the notification list.  There is a
+ * reference held on this event since it was on the list.  It is the responsibility
+ * of the caller to drop this reference.
+ */
+struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group)
+{
+	struct fsnotify_event *event;
+	struct fsnotify_event_holder *holder;
+
+	BUG_ON(!mutex_is_locked(&group->notification_mutex));
+
+	holder = list_first_entry(&group->notification_list, struct fsnotify_event_holder, event_list);
+
+	event = holder->event;
+
+	spin_lock(&event->lock);
+	holder->event = NULL;
+	list_del_init(&holder->event_list);
+	spin_unlock(&event->lock);
+
+	/* event == holder means we are referenced through the in event holder */
+	if (holder != &event->holder)
+		fsnotify_destroy_event_holder(holder);
+
+	group->q_len--;
+
+	return event;
+}
+
+/*
+ * This will not remove the event, that must be done with fsnotify_remove_notify_event()
+ */
+struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group)
+{
+	struct fsnotify_event *event;
+	struct fsnotify_event_holder *holder;
+
+	BUG_ON(!mutex_is_locked(&group->notification_mutex));
+
+	holder = list_first_entry(&group->notification_list, struct fsnotify_event_holder, event_list);
+	event = holder->event;
+
+	return event;
+}
+
+/*
+ * Called when a group is being torn down to clean up any outstanding
+ * event notifications.
+ */
+void fsnotify_flush_notify(struct fsnotify_group *group)
+{
+	struct fsnotify_event *event;
+	struct fsnotify_event_private_data *priv;
+
+	mutex_lock(&group->notification_mutex);
+	while (!fsnotify_notify_queue_is_empty(group)) {
+		event = fsnotify_remove_notify_event(group);
+		/* if they don't implement free_event_priv they better not have attached any */
+		if (group->ops->free_event_priv) {
+			spin_lock(&event->lock);
+			priv = fsnotify_remove_priv_from_event(group, event);
+			spin_unlock(&event->lock);
+			if (priv)
+				group->ops->free_event_priv(priv);
+		}
+		fsnotify_put_event(event); /* matches fsnotify_add_notify_event */
+	}
+	mutex_unlock(&group->notification_mutex);
+}
+
+static void initialize_event(struct fsnotify_event *event)
+{
+	event->holder.event = NULL;
+	INIT_LIST_HEAD(&event->holder.event_list);
+	atomic_set(&event->refcnt, 1);
+
+	spin_lock_init(&event->lock);
+
+	event->path.dentry = NULL;
+	event->path.mnt = NULL;
+	event->inode = NULL;
+	event->data_type = FSNOTIFY_EVENT_NONE;
+
+	INIT_LIST_HEAD(&event->private_data_list);
+
+	event->to_tell = NULL;
+
+	event->file_name = NULL;
+	event->name_len = 0;
+
+	event->sync_cookie = 0;
+}
+
+/*
+ * fsnotify_create_event - Allocate a new event which will be sent to each
+ * group's handle_event function if the group was interested in this
+ * particular event.
+ *
+ * @to_tell the inode which is supposed to receive the event (sometimes a
+ *	parent of the inode to which the event happened.
+ * @mask what actually happened.
+ * @data pointer to the object which was actually affected
+ * @data_type flag indication if the data is a file, path, inode, nothing...
+ * @name the filename, if available
+ */
+struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
+					     int data_type, const char *name, u32 cookie)
+{
+	struct fsnotify_event *event;
+
+	event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+	if (!event)
+		return NULL;
+
+	initialize_event(event);
+
+	if (name) {
+		event->file_name = kstrdup(name, GFP_KERNEL);
+		if (!event->file_name) {
+			kmem_cache_free(fsnotify_event_cachep, event);
+			return NULL;
+		}
+		event->name_len = strlen(event->file_name);
+	}
+
+	event->sync_cookie = cookie;
+	event->to_tell = to_tell;
+
+	switch (data_type) {
+	case FSNOTIFY_EVENT_FILE: {
+		struct file *file = data;
+		struct path *path = &file->f_path;
+		event->path.dentry = path->dentry;
+		event->path.mnt = path->mnt;
+		path_get(&event->path);
+		event->data_type = FSNOTIFY_EVENT_PATH;
+		break;
+	}
+	case FSNOTIFY_EVENT_PATH: {
+		struct path *path = data;
+		event->path.dentry = path->dentry;
+		event->path.mnt = path->mnt;
+		path_get(&event->path);
+		event->data_type = FSNOTIFY_EVENT_PATH;
+		break;
+	}
+	case FSNOTIFY_EVENT_INODE:
+		event->inode = data;
+		event->data_type = FSNOTIFY_EVENT_INODE;
+		break;
+	case FSNOTIFY_EVENT_NONE:
+		event->inode = NULL;
+		event->path.dentry = NULL;
+		event->path.mnt = NULL;
+		break;
+	default:
+		BUG();
+	}
+
+	event->mask = mask;
+
+	return event;
+}
+
+__init int fsnotify_notification_init(void)
+{
+	fsnotify_event_cachep = KMEM_CACHE(fsnotify_event, SLAB_PANIC);
+	fsnotify_event_holder_cachep = KMEM_CACHE(fsnotify_event_holder, SLAB_PANIC);
+
+	initialize_event(&q_overflow_event);
+	q_overflow_event.mask = FS_Q_OVERFLOW;
+
+	return 0;
+}
+subsys_initcall(fsnotify_notification_init);
+
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index f76951dcd4a..abaaa1cbf8d 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
-#include <linux/blkdev.h>	/* For bdev_hardsect_size(). */
+#include <linux/blkdev.h>	/* For bdev_logical_block_size(). */
 #include <linux/backing-dev.h>
 #include <linux/buffer_head.h>
 #include <linux/vfs.h>
@@ -443,6 +443,8 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 	ntfs_volume *vol = NTFS_SB(sb);
 
 	ntfs_debug("Entering with remount options string: %s", opt);
+
+	lock_kernel();
 #ifndef NTFS_RW
 	/* For read-only compiled driver, enforce read-only flag. */
 	*flags |= MS_RDONLY;
@@ -466,15 +468,18 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 		if (NVolErrors(vol)) {
 			ntfs_error(sb, "Volume has errors and is read-only%s",
 					es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (vol->vol_flags & VOLUME_IS_DIRTY) {
 			ntfs_error(sb, "Volume is dirty and read-only%s", es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
 			ntfs_error(sb, "Volume has been modified by chkdsk "
 					"and is read-only%s", es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
@@ -482,11 +487,13 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 					"(0x%x) and is read-only%s",
 					(unsigned)le16_to_cpu(vol->vol_flags),
 					es);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (ntfs_set_volume_flags(vol, VOLUME_IS_DIRTY)) {
 			ntfs_error(sb, "Failed to set dirty bit in volume "
 					"information flags%s", es);
+			unlock_kernel();
 			return -EROFS;
 		}
 #if 0
@@ -506,18 +513,21 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 			ntfs_error(sb, "Failed to empty journal $LogFile%s",
 					es);
 			NVolSetErrors(vol);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (!ntfs_mark_quotas_out_of_date(vol)) {
 			ntfs_error(sb, "Failed to mark quotas out of date%s",
 					es);
 			NVolSetErrors(vol);
+			unlock_kernel();
 			return -EROFS;
 		}
 		if (!ntfs_stamp_usnjrnl(vol)) {
 			ntfs_error(sb, "Failed to stamp transation log "
 					"($UsnJrnl)%s", es);
 			NVolSetErrors(vol);
+			unlock_kernel();
 			return -EROFS;
 		}
 	} else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) {
@@ -533,8 +543,11 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 
 	// TODO: Deal with *flags.
 
-	if (!parse_options(vol, opt))
+	if (!parse_options(vol, opt)) {
+		unlock_kernel();
 		return -EINVAL;
+	}
+	unlock_kernel();
 	ntfs_debug("Done.");
 	return 0;
 }
@@ -2246,6 +2259,9 @@ static void ntfs_put_super(struct super_block *sb)
 	ntfs_volume *vol = NTFS_SB(sb);
 
 	ntfs_debug("Entering.");
+
+	lock_kernel();
+
 #ifdef NTFS_RW
 	/*
 	 * Commit all inodes while they are still open in case some of them
@@ -2373,39 +2389,12 @@ static void ntfs_put_super(struct super_block *sb)
 		vol->mftmirr_ino = NULL;
 	}
 	/*
-	 * If any dirty inodes are left, throw away all mft data page cache
-	 * pages to allow a clean umount.  This should never happen any more
-	 * due to mft.c::ntfs_mft_writepage() cleaning all the dirty pages as
-	 * the underlying mft records are written out and cleaned.  If it does,
-	 * happen anyway, we want to know...
+	 * We should have no dirty inodes left, due to
+	 * mft.c::ntfs_mft_writepage() cleaning all the dirty pages as
+	 * the underlying mft records are written out and cleaned.
 	 */
 	ntfs_commit_inode(vol->mft_ino);
 	write_inode_now(vol->mft_ino, 1);
-	if (sb_has_dirty_inodes(sb)) {
-		const char *s1, *s2;
-
-		mutex_lock(&vol->mft_ino->i_mutex);
-		truncate_inode_pages(vol->mft_ino->i_mapping, 0);
-		mutex_unlock(&vol->mft_ino->i_mutex);
-		write_inode_now(vol->mft_ino, 1);
-		if (sb_has_dirty_inodes(sb)) {
-			static const char *_s1 = "inodes";
-			static const char *_s2 = "";
-			s1 = _s1;
-			s2 = _s2;
-		} else {
-			static const char *_s1 = "mft pages";
-			static const char *_s2 = "They have been thrown "
-					"away.  ";
-			s1 = _s1;
-			s2 = _s2;
-		}
-		ntfs_error(sb, "Dirty %s found at umount time.  %sYou should "
-				"run chkdsk.  Please email "
-				"linux-ntfs-dev@lists.sourceforge.net and say "
-				"that you saw this message.  Thank you.", s1,
-				s2);
-	}
 #endif /* NTFS_RW */
 
 	iput(vol->mft_ino);
@@ -2444,7 +2433,8 @@ static void ntfs_put_super(struct super_block *sb)
 	}
 	sb->s_fs_info = NULL;
 	kfree(vol);
-	return;
+
+	unlock_kernel();
 }
 
 /**
@@ -2785,13 +2775,13 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent)
 		goto err_out_now;
 
 	/* We support sector sizes up to the PAGE_CACHE_SIZE. */
-	if (bdev_hardsect_size(sb->s_bdev) > PAGE_CACHE_SIZE) {
+	if (bdev_logical_block_size(sb->s_bdev) > PAGE_CACHE_SIZE) {
 		if (!silent)
 			ntfs_error(sb, "Device has unsupported sector size "
 					"(%i).  The maximum supported sector "
 					"size on this architecture is %lu "
 					"bytes.",
-					bdev_hardsect_size(sb->s_bdev),
+					bdev_logical_block_size(sb->s_bdev),
 					PAGE_CACHE_SIZE);
 		goto err_out_now;
 	}
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 4f85eceab37..09cc25d0461 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -1371,7 +1371,7 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg,
 
 	bdevname(reg->hr_bdev, reg->hr_dev_name);
 
-	sectsize = bdev_hardsect_size(reg->hr_bdev);
+	sectsize = bdev_logical_block_size(reg->hr_bdev);
 	if (sectsize != reg->hr_block_bytes) {
 		mlog(ML_ERROR,
 		     "blocksize %u incorrect for device, expected %d",
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 79ff8d9d37e..201b40a441f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -42,6 +42,7 @@
 #include <linux/mount.h>
 #include <linux/seq_file.h>
 #include <linux/quotaops.h>
+#include <linux/smp_lock.h>
 
 #define MLOG_MASK_PREFIX ML_SUPER
 #include <cluster/masklog.h>
@@ -126,7 +127,6 @@ static int ocfs2_get_sector(struct super_block *sb,
 			    struct buffer_head **bh,
 			    int block,
 			    int sect_size);
-static void ocfs2_write_super(struct super_block *sb);
 static struct inode *ocfs2_alloc_inode(struct super_block *sb);
 static void ocfs2_destroy_inode(struct inode *inode);
 static int ocfs2_susp_quotas(struct ocfs2_super *osb, int unsuspend);
@@ -141,7 +141,6 @@ static const struct super_operations ocfs2_sops = {
 	.clear_inode	= ocfs2_clear_inode,
 	.delete_inode	= ocfs2_delete_inode,
 	.sync_fs	= ocfs2_sync_fs,
-	.write_super	= ocfs2_write_super,
 	.put_super	= ocfs2_put_super,
 	.remount_fs	= ocfs2_remount,
 	.show_options   = ocfs2_show_options,
@@ -365,24 +364,12 @@ static struct file_operations ocfs2_osb_debug_fops = {
 	.llseek =	generic_file_llseek,
 };
 
-/*
- * write_super and sync_fs ripped right out of ext3.
- */
-static void ocfs2_write_super(struct super_block *sb)
-{
-	if (mutex_trylock(&sb->s_lock) != 0)
-		BUG();
-	sb->s_dirt = 0;
-}
-
 static int ocfs2_sync_fs(struct super_block *sb, int wait)
 {
 	int status;
 	tid_t target;
 	struct ocfs2_super *osb = OCFS2_SB(sb);
 
-	sb->s_dirt = 0;
-
 	if (ocfs2_is_hard_readonly(osb))
 		return -EROFS;
 
@@ -595,6 +582,8 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data)
 	struct mount_options parsed_options;
 	struct ocfs2_super *osb = OCFS2_SB(sb);
 
+	lock_kernel();
+
 	if (!ocfs2_parse_options(sb, data, &parsed_options, 1)) {
 		ret = -EINVAL;
 		goto out;
@@ -698,6 +687,7 @@ unlock_osb:
 			ocfs2_set_journal_params(osb);
 	}
 out:
+	unlock_kernel();
 	return ret;
 }
 
@@ -713,7 +703,7 @@ static int ocfs2_sb_probe(struct super_block *sb,
 	*bh = NULL;
 
 	/* may be > 512 */
-	*sector_size = bdev_hardsect_size(sb->s_bdev);
+	*sector_size = bdev_logical_block_size(sb->s_bdev);
 	if (*sector_size > OCFS2_MAX_BLOCKSIZE) {
 		mlog(ML_ERROR, "Hardware sector size too large: %d (max=%d)\n",
 		     *sector_size, OCFS2_MAX_BLOCKSIZE);
@@ -1550,9 +1540,13 @@ static void ocfs2_put_super(struct super_block *sb)
 {
 	mlog_entry("(0x%p)\n", sb);
 
+	lock_kernel();
+
 	ocfs2_sync_blockdev(sb);
 	ocfs2_dismount_volume(sb, 0);
 
+	unlock_kernel();
+
 	mlog_exit_void();
 }
 
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 834b2331f6b..d17e774eaf4 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -11,21 +11,6 @@
 #include <linux/mpage.h>
 #include "omfs.h"
 
-static int omfs_sync_file(struct file *file, struct dentry *dentry,
-		int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-	err |= omfs_sync_inode(inode);
-	return err ? -EIO : 0;
-}
-
 static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset)
 {
 	return (sbi->s_sys_blocksize - offset -
@@ -344,7 +329,7 @@ struct file_operations omfs_file_operations = {
 	.aio_read = generic_file_aio_read,
 	.aio_write = generic_file_aio_write,
 	.mmap = generic_file_mmap,
-	.fsync = omfs_sync_file,
+	.fsync = simple_fsync,
 	.splice_read = generic_file_splice_read,
 };
 
diff --git a/fs/open.c b/fs/open.c
index bdfbf03615a..7200e23d925 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -612,7 +612,7 @@ SYSCALL_DEFINE2(fchmod, unsigned int, fd, mode_t, mode)
 
 	audit_inode(NULL, dentry);
 
-	err = mnt_want_write(file->f_path.mnt);
+	err = mnt_want_write_file(file);
 	if (err)
 		goto out_putf;
 	mutex_lock(&inode->i_mutex);
@@ -761,7 +761,7 @@ SYSCALL_DEFINE3(fchown, unsigned int, fd, uid_t, user, gid_t, group)
 	if (!file)
 		goto out;
 
-	error = mnt_want_write(file->f_path.mnt);
+	error = mnt_want_write_file(file);
 	if (error)
 		goto out_fput;
 	dentry = file->f_path.dentry;
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 99e33ef40be..1a9c7878f86 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -219,6 +219,13 @@ ssize_t part_size_show(struct device *dev,
 	return sprintf(buf, "%llu\n",(unsigned long long)p->nr_sects);
 }
 
+ssize_t part_alignment_offset_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct hd_struct *p = dev_to_part(dev);
+	return sprintf(buf, "%llu\n", (unsigned long long)p->alignment_offset);
+}
+
 ssize_t part_stat_show(struct device *dev,
 		       struct device_attribute *attr, char *buf)
 {
@@ -272,6 +279,7 @@ ssize_t part_fail_store(struct device *dev,
 static DEVICE_ATTR(partition, S_IRUGO, part_partition_show, NULL);
 static DEVICE_ATTR(start, S_IRUGO, part_start_show, NULL);
 static DEVICE_ATTR(size, S_IRUGO, part_size_show, NULL);
+static DEVICE_ATTR(alignment_offset, S_IRUGO, part_alignment_offset_show, NULL);
 static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL);
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 static struct device_attribute dev_attr_fail =
@@ -282,6 +290,7 @@ static struct attribute *part_attrs[] = {
 	&dev_attr_partition.attr,
 	&dev_attr_start.attr,
 	&dev_attr_size.attr,
+	&dev_attr_alignment_offset.attr,
 	&dev_attr_stat.attr,
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 	&dev_attr_fail.attr,
@@ -383,6 +392,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 	pdev = part_to_dev(p);
 
 	p->start_sect = start;
+	p->alignment_offset = queue_sector_alignment_offset(disk->queue, start);
 	p->nr_sects = len;
 	p->partno = partno;
 	p->policy = get_disk_ro(disk);
@@ -546,27 +556,49 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 
 	/* add partitions */
 	for (p = 1; p < state->limit; p++) {
-		sector_t size = state->parts[p].size;
-		sector_t from = state->parts[p].from;
+		sector_t size, from;
+try_scan:
+		size = state->parts[p].size;
 		if (!size)
 			continue;
+
+		from = state->parts[p].from;
 		if (from >= get_capacity(disk)) {
 			printk(KERN_WARNING
 			       "%s: p%d ignored, start %llu is behind the end of the disk\n",
 			       disk->disk_name, p, (unsigned long long) from);
 			continue;
 		}
+
 		if (from + size > get_capacity(disk)) {
-			/*
-			 * we can not ignore partitions of broken tables
-			 * created by for example camera firmware, but we
-			 * limit them to the end of the disk to avoid
-			 * creating invalid block devices
-			 */
+			struct block_device_operations *bdops = disk->fops;
+			unsigned long long capacity;
+
 			printk(KERN_WARNING
-			       "%s: p%d size %llu limited to end of disk\n",
+			       "%s: p%d size %llu exceeds device capacity, ",
 			       disk->disk_name, p, (unsigned long long) size);
-			size = get_capacity(disk) - from;
+
+			if (bdops->set_capacity &&
+			    (disk->flags & GENHD_FL_NATIVE_CAPACITY) == 0) {
+				printk(KERN_CONT "enabling native capacity\n");
+				capacity = bdops->set_capacity(disk, ~0ULL);
+				disk->flags |= GENHD_FL_NATIVE_CAPACITY;
+				if (capacity > get_capacity(disk)) {
+					set_capacity(disk, capacity);
+					check_disk_size_change(disk, bdev);
+					bdev->bd_invalidated = 0;
+				}
+				goto try_scan;
+			} else {
+				/*
+				 * we can not ignore partitions of broken tables
+				 * created by for example camera firmware, but
+				 * we limit them to the end of the disk to avoid
+				 * creating invalid block devices
+				 */
+				printk(KERN_CONT "limited to end of disk\n");
+				size = get_capacity(disk) - from;
+			}
 		}
 		part = add_partition(disk, p, from, size,
 				     state->parts[p].flags);
diff --git a/fs/partitions/ibm.c b/fs/partitions/ibm.c
index 46297683cd3..fc71aab0846 100644
--- a/fs/partitions/ibm.c
+++ b/fs/partitions/ibm.c
@@ -76,7 +76,7 @@ ibm_partition(struct parsed_partitions *state, struct block_device *bdev)
 	Sector sect;
 
 	res = 0;
-	blocksize = bdev_hardsect_size(bdev);
+	blocksize = bdev_logical_block_size(bdev);
 	if (blocksize <= 0)
 		goto out_exit;
 	i_size = i_size_read(bdev->bd_inode);
diff --git a/fs/partitions/msdos.c b/fs/partitions/msdos.c
index 796511886f2..0028d2ef066 100644
--- a/fs/partitions/msdos.c
+++ b/fs/partitions/msdos.c
@@ -110,7 +110,7 @@ parse_extended(struct parsed_partitions *state, struct block_device *bdev,
 	Sector sect;
 	unsigned char *data;
 	u32 this_sector, this_size;
-	int sector_size = bdev_hardsect_size(bdev) / 512;
+	int sector_size = bdev_logical_block_size(bdev) / 512;
 	int loopct = 0;		/* number of links followed
 				   without finding a data partition */
 	int i;
@@ -415,7 +415,7 @@ static struct {
  
 int msdos_partition(struct parsed_partitions *state, struct block_device *bdev)
 {
-	int sector_size = bdev_hardsect_size(bdev) / 512;
+	int sector_size = bdev_logical_block_size(bdev) / 512;
 	Sector sect;
 	unsigned char *data;
 	struct partition *p;
diff --git a/fs/pipe.c b/fs/pipe.c
index 13414ec45b8..f7dd21ad85a 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -302,6 +302,20 @@ int generic_pipe_buf_confirm(struct pipe_inode_info *info,
 	return 0;
 }
 
+/**
+ * generic_pipe_buf_release - put a reference to a &struct pipe_buffer
+ * @pipe:	the pipe that the buffer belongs to
+ * @buf:	the buffer to put a reference to
+ *
+ * Description:
+ *	This function releases a reference to @buf.
+ */
+void generic_pipe_buf_release(struct pipe_inode_info *pipe,
+			      struct pipe_buffer *buf)
+{
+	page_cache_release(buf->page);
+}
+
 static const struct pipe_buf_operations anon_pipe_buf_ops = {
 	.can_merge = 1,
 	.map = generic_pipe_buf_map,
diff --git a/fs/proc/base.c b/fs/proc/base.c
index fb45615943c..1539e630c47 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1956,7 +1956,7 @@ static struct dentry *proc_pident_instantiate(struct inode *dir,
 	const struct pid_entry *p = ptr;
 	struct inode *inode;
 	struct proc_inode *ei;
-	struct dentry *error = ERR_PTR(-EINVAL);
+	struct dentry *error = ERR_PTR(-ENOENT);
 
 	inode = proc_pid_make_inode(dir->i_sb, task);
 	if (!inode)
@@ -2128,9 +2128,15 @@ static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf,
 	if (copy_from_user(page, buf, count))
 		goto out_free;
 
+	/* Guard against adverse ptrace interaction */
+	length = mutex_lock_interruptible(&task->cred_guard_mutex);
+	if (length < 0)
+		goto out_free;
+
 	length = security_setprocattr(task,
 				      (char*)file->f_path.dentry->d_name.name,
 				      (void*)page, count);
+	mutex_unlock(&task->cred_guard_mutex);
 out_free:
 	free_page((unsigned long) page);
 out:
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index f6db9618a88..753ca37002c 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -92,3 +92,28 @@ struct pde_opener {
 	struct list_head lh;
 };
 void pde_users_dec(struct proc_dir_entry *pde);
+
+extern spinlock_t proc_subdir_lock;
+
+struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
+int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
+unsigned long task_vsize(struct mm_struct *);
+int task_statm(struct mm_struct *, int *, int *, int *, int *);
+void task_mem(struct seq_file *, struct mm_struct *);
+
+struct proc_dir_entry *de_get(struct proc_dir_entry *de);
+void de_put(struct proc_dir_entry *de);
+
+extern struct vfsmount *proc_mnt;
+int proc_fill_super(struct super_block *);
+struct inode *proc_get_inode(struct super_block *, unsigned int, struct proc_dir_entry *);
+
+/*
+ * These are generic /proc routines that use the internal
+ * "struct proc_dir_entry" tree to traverse the filesystem.
+ *
+ * The /proc root directory has extended versions to take care
+ * of the /proc/<pid> subdirectories.
+ */
+int proc_readdir(struct file *, void *, filldir_t);
+struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
diff --git a/fs/proc/loadavg.c b/fs/proc/loadavg.c
index 9bca39cf99e..1afa4dd4cae 100644
--- a/fs/proc/loadavg.c
+++ b/fs/proc/loadavg.c
@@ -12,20 +12,14 @@
 
 static int loadavg_proc_show(struct seq_file *m, void *v)
 {
-	int a, b, c;
-	unsigned long seq;
+	unsigned long avnrun[3];
 
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		a = avenrun[0] + (FIXED_1/200);
-		b = avenrun[1] + (FIXED_1/200);
-		c = avenrun[2] + (FIXED_1/200);
-	} while (read_seqretry(&xtime_lock, seq));
+	get_avenrun(avnrun, FIXED_1/200, 0);
 
-	seq_printf(m, "%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
-		LOAD_INT(a), LOAD_FRAC(a),
-		LOAD_INT(b), LOAD_FRAC(b),
-		LOAD_INT(c), LOAD_FRAC(c),
+	seq_printf(m, "%lu.%02lu %lu.%02lu %lu.%02lu %ld/%d %d\n",
+		LOAD_INT(avnrun[0]), LOAD_FRAC(avnrun[0]),
+		LOAD_INT(avnrun[1]), LOAD_FRAC(avnrun[1]),
+		LOAD_INT(avnrun[2]), LOAD_FRAC(avnrun[2]),
 		nr_running(), nr_threads,
 		task_active_pid_ns(current)->last_pid);
 	return 0;
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index de2bba5a344..fc6c3025bef 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -11,6 +11,7 @@
 #include <linux/string.h>
 #include <asm/prom.h>
 #include <asm/uaccess.h>
+#include "internal.h"
 
 #ifndef HAVE_ARCH_DEVTREE_FIXUPS
 static inline void set_node_proc_entry(struct device_node *np,
diff --git a/fs/qnx4/Makefile b/fs/qnx4/Makefile
index 502d7fe98ba..e4d408cc547 100644
--- a/fs/qnx4/Makefile
+++ b/fs/qnx4/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_QNX4FS_FS) += qnx4.o
 
-qnx4-objs := inode.o dir.o namei.o file.o bitmap.o truncate.o fsync.o
+qnx4-objs := inode.o dir.o namei.o file.o bitmap.o truncate.o
diff --git a/fs/qnx4/bitmap.c b/fs/qnx4/bitmap.c
index 8425cf6e962..e1cd061a25f 100644
--- a/fs/qnx4/bitmap.c
+++ b/fs/qnx4/bitmap.c
@@ -13,14 +13,9 @@
  * 28-06-1998 by Frank Denis : qnx4_free_inode (to be fixed) .
  */
 
-#include <linux/time.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-#include <linux/stat.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
 #include <linux/buffer_head.h>
 #include <linux/bitops.h>
+#include "qnx4.h"
 
 #if 0
 int qnx4_new_block(struct super_block *sb)
diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index ea9ffefb48a..003c68f3238 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -11,14 +11,9 @@
  * 20-06-1998 by Frank Denis : Linux 2.1.99+ & dcache support.
  */
 
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-#include <linux/stat.h>
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
-
+#include "qnx4.h"
 
 static int qnx4_readdir(struct file *filp, void *dirent, filldir_t filldir)
 {
@@ -84,7 +79,7 @@ const struct file_operations qnx4_dir_operations =
 {
 	.read		= generic_read_dir,
 	.readdir	= qnx4_readdir,
-	.fsync		= file_fsync,
+	.fsync		= simple_fsync,
 };
 
 const struct inode_operations qnx4_dir_inode_operations =
diff --git a/fs/qnx4/file.c b/fs/qnx4/file.c
index 867f42b0203..09b170ac936 100644
--- a/fs/qnx4/file.c
+++ b/fs/qnx4/file.c
@@ -12,8 +12,7 @@
  * 27-06-1998 by Frank Denis : file overwriting.
  */
 
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
+#include "qnx4.h"
 
 /*
  * We have mostly NULL's here: the current defaults are ok for
@@ -29,7 +28,7 @@ const struct file_operations qnx4_file_operations =
 #ifdef CONFIG_QNX4FS_RW
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
-	.fsync		= qnx4_sync_file,
+	.fsync		= simple_fsync,
 #endif
 };
 
diff --git a/fs/qnx4/fsync.c b/fs/qnx4/fsync.c
deleted file mode 100644
index aa3b19544be..00000000000
--- a/fs/qnx4/fsync.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/* 
- * QNX4 file system, Linux implementation.
- * 
- * Version : 0.1
- * 
- * Using parts of the xiafs filesystem.
- * 
- * History :
- * 
- * 24-03-1998 by Richard Frowijn : first release.
- */
-
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/stat.h>
-#include <linux/fcntl.h>
-#include <linux/smp_lock.h>
-#include <linux/buffer_head.h>
-
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-
-#include <asm/system.h>
-
-/*
- * The functions for qnx4 fs file synchronization.
- */
-
-#ifdef CONFIG_QNX4FS_RW
-
-static int sync_block(struct inode *inode, unsigned short *block, int wait)
-{
-	struct buffer_head *bh;
-	unsigned short tmp;
-
-	if (!*block)
-		return 0;
-	tmp = *block;
-	bh = sb_find_get_block(inode->i_sb, *block);
-	if (!bh)
-		return 0;
-	if (*block != tmp) {
-		brelse(bh);
-		return 1;
-	}
-	if (wait && buffer_req(bh) && !buffer_uptodate(bh)) {
-		brelse(bh);
-		return -1;
-	}
-	if (wait || !buffer_uptodate(bh) || !buffer_dirty(bh)) {
-		brelse(bh);
-		return 0;
-	}
-	ll_rw_block(WRITE, 1, &bh);
-	atomic_dec(&bh->b_count);
-	return 0;
-}
-
-#ifdef WTF
-static int sync_iblock(struct inode *inode, unsigned short *iblock,
-		       struct buffer_head **bh, int wait)
-{
-	int rc;
-	unsigned short tmp;
-
-	*bh = NULL;
-	tmp = *iblock;
-	if (!tmp)
-		return 0;
-	rc = sync_block(inode, iblock, wait);
-	if (rc)
-		return rc;
-	*bh = sb_bread(inode->i_sb, tmp);
-	if (tmp != *iblock) {
-		brelse(*bh);
-		*bh = NULL;
-		return 1;
-	}
-	if (!*bh)
-		return -1;
-	return 0;
-}
-#endif
-
-static int sync_direct(struct inode *inode, int wait)
-{
-	int i;
-	int rc, err = 0;
-
-	for (i = 0; i < 7; i++) {
-		rc = sync_block(inode,
-				(unsigned short *) qnx4_raw_inode(inode)->di_first_xtnt.xtnt_blk + i, wait);
-		if (rc > 0)
-			break;
-		if (rc)
-			err = rc;
-	}
-	return err;
-}
-
-#ifdef WTF
-static int sync_indirect(struct inode *inode, unsigned short *iblock, int wait)
-{
-	int i;
-	struct buffer_head *ind_bh;
-	int rc, err = 0;
-
-	rc = sync_iblock(inode, iblock, &ind_bh, wait);
-	if (rc || !ind_bh)
-		return rc;
-
-	for (i = 0; i < 512; i++) {
-		rc = sync_block(inode,
-				((unsigned short *) ind_bh->b_data) + i,
-				wait);
-		if (rc > 0)
-			break;
-		if (rc)
-			err = rc;
-	}
-	brelse(ind_bh);
-	return err;
-}
-
-static int sync_dindirect(struct inode *inode, unsigned short *diblock,
-			  int wait)
-{
-	int i;
-	struct buffer_head *dind_bh;
-	int rc, err = 0;
-
-	rc = sync_iblock(inode, diblock, &dind_bh, wait);
-	if (rc || !dind_bh)
-		return rc;
-
-	for (i = 0; i < 512; i++) {
-		rc = sync_indirect(inode,
-				((unsigned short *) dind_bh->b_data) + i,
-				   wait);
-		if (rc > 0)
-			break;
-		if (rc)
-			err = rc;
-	}
-	brelse(dind_bh);
-	return err;
-}
-#endif
-
-int qnx4_sync_file(struct file *file, struct dentry *dentry, int unused)
-{
-        struct inode *inode = dentry->d_inode;
-	int wait, err = 0;
-        
-        (void) file;
-	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
-	      S_ISLNK(inode->i_mode)))
-		return -EINVAL;
-
-	lock_kernel();
-	for (wait = 0; wait <= 1; wait++) {
-		err |= sync_direct(inode, wait);
-	}
-	err |= qnx4_sync_inode(inode);
-	unlock_kernel();
-	return (err < 0) ? -EIO : 0;
-}
-
-#endif
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index fe1f0f31d11..681df5fcd16 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -13,19 +13,15 @@
  */
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/highuid.h>
 #include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/buffer_head.h>
-#include <linux/vfs.h>
-#include <asm/uaccess.h>
+#include <linux/writeback.h>
+#include <linux/statfs.h>
+#include "qnx4.h"
 
 #define QNX4_VERSION  4
 #define QNX4_BMNAME   ".bitmap"
@@ -34,31 +30,6 @@ static const struct super_operations qnx4_sops;
 
 #ifdef CONFIG_QNX4FS_RW
 
-int qnx4_sync_inode(struct inode *inode)
-{
-	int err = 0;
-# if 0
-	struct buffer_head *bh;
-
-   	bh = qnx4_update_inode(inode);
-	if (bh && buffer_dirty(bh))
-	{
-		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh))
-		{
-			printk ("IO error syncing qnx4 inode [%s:%08lx]\n",
-				inode->i_sb->s_id, inode->i_ino);
-			err = -1;
-		}
-	        brelse (bh);
-	} else if (!bh) {
-		err = -1;
-	}
-# endif
-
-	return err;
-}
-
 static void qnx4_delete_inode(struct inode *inode)
 {
 	QNX4DEBUG(("qnx4: deleting inode [%lu]\n", (unsigned long) inode->i_ino));
@@ -70,15 +41,7 @@ static void qnx4_delete_inode(struct inode *inode)
 	unlock_kernel();
 }
 
-static void qnx4_write_super(struct super_block *sb)
-{
-	lock_kernel();
-	QNX4DEBUG(("qnx4: write_super\n"));
-	sb->s_dirt = 0;
-	unlock_kernel();
-}
-
-static int qnx4_write_inode(struct inode *inode, int unused)
+static int qnx4_write_inode(struct inode *inode, int do_sync)
 {
 	struct qnx4_inode_entry *raw_inode;
 	int block, ino;
@@ -115,6 +78,16 @@ static int qnx4_write_inode(struct inode *inode, int unused)
 	raw_inode->di_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
 	raw_inode->di_first_xtnt.xtnt_size = cpu_to_le32(inode->i_blocks);
 	mark_buffer_dirty(bh);
+	if (do_sync) {
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh)) {
+			printk("qnx4: IO error syncing inode [%s:%08x]\n",
+					inode->i_sb->s_id, ino);
+			brelse(bh);
+			unlock_kernel();
+			return -EIO;
+		}
+	}
 	brelse(bh);
 	unlock_kernel();
 	return 0;
@@ -138,7 +111,6 @@ static const struct super_operations qnx4_sops =
 #ifdef CONFIG_QNX4FS_RW
 	.write_inode	= qnx4_write_inode,
 	.delete_inode	= qnx4_delete_inode,
-	.write_super	= qnx4_write_super,
 #endif
 };
 
diff --git a/fs/qnx4/namei.c b/fs/qnx4/namei.c
index 775eed3a408..5972ed21493 100644
--- a/fs/qnx4/namei.c
+++ b/fs/qnx4/namei.c
@@ -12,16 +12,9 @@
  * 04-07-1998 by Frank Denis : first step for rmdir/unlink.
  */
 
-#include <linux/time.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/stat.h>
-#include <linux/fcntl.h>
-#include <linux/errno.h>
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
+#include "qnx4.h"
 
 
 /*
@@ -187,7 +180,7 @@ int qnx4_rmdir(struct inode *dir, struct dentry *dentry)
 	de->di_status = 0;
 	memset(de->di_fname, 0, sizeof de->di_fname);
 	de->di_mode = 0;
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	clear_nlink(inode);
 	mark_inode_dirty(inode);
 	inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
@@ -232,7 +225,7 @@ int qnx4_unlink(struct inode *dir, struct dentry *dentry)
 	de->di_status = 0;
 	memset(de->di_fname, 0, sizeof de->di_fname);
 	de->di_mode = 0;
-	mark_buffer_dirty(bh);
+	mark_buffer_dirty_inode(bh, dir);
 	dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
 	mark_inode_dirty(dir);
 	inode->i_ctime = dir->i_ctime;
diff --git a/fs/qnx4/qnx4.h b/fs/qnx4/qnx4.h
new file mode 100644
index 00000000000..9efc089454f
--- /dev/null
+++ b/fs/qnx4/qnx4.h
@@ -0,0 +1,57 @@
+#include <linux/fs.h>
+#include <linux/qnx4_fs.h>
+
+#define QNX4_DEBUG 0
+
+#if QNX4_DEBUG
+#define QNX4DEBUG(X) printk X
+#else
+#define QNX4DEBUG(X) (void) 0
+#endif
+
+struct qnx4_sb_info {
+	struct buffer_head	*sb_buf;	/* superblock buffer */
+	struct qnx4_super_block	*sb;		/* our superblock */
+	unsigned int		Version;	/* may be useful */
+	struct qnx4_inode_entry	*BitMap;	/* useful */
+};
+
+struct qnx4_inode_info {
+	struct qnx4_inode_entry raw;
+	loff_t mmu_private;
+	struct inode vfs_inode;
+};
+
+extern struct inode *qnx4_iget(struct super_block *, unsigned long);
+extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd);
+extern unsigned long qnx4_count_free_blocks(struct super_block *sb);
+extern unsigned long qnx4_block_map(struct inode *inode, long iblock);
+
+extern struct buffer_head *qnx4_bread(struct inode *, int, int);
+
+extern const struct inode_operations qnx4_file_inode_operations;
+extern const struct inode_operations qnx4_dir_inode_operations;
+extern const struct file_operations qnx4_file_operations;
+extern const struct file_operations qnx4_dir_operations;
+extern int qnx4_is_free(struct super_block *sb, long block);
+extern int qnx4_set_bitmap(struct super_block *sb, long block, int busy);
+extern int qnx4_create(struct inode *inode, struct dentry *dentry, int mode, struct nameidata *nd);
+extern void qnx4_truncate(struct inode *inode);
+extern void qnx4_free_inode(struct inode *inode);
+extern int qnx4_unlink(struct inode *dir, struct dentry *dentry);
+extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry);
+
+static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+static inline struct qnx4_inode_info *qnx4_i(struct inode *inode)
+{
+	return container_of(inode, struct qnx4_inode_info, vfs_inode);
+}
+
+static inline struct qnx4_inode_entry *qnx4_raw_inode(struct inode *inode)
+{
+	return &qnx4_i(inode)->raw;
+}
diff --git a/fs/qnx4/truncate.c b/fs/qnx4/truncate.c
index 6437c1c3d1d..d94d9ee241f 100644
--- a/fs/qnx4/truncate.c
+++ b/fs/qnx4/truncate.c
@@ -10,12 +10,8 @@
  * 30-06-1998 by Frank DENIS : ugly filler.
  */
 
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/qnx4_fs.h>
 #include <linux/smp_lock.h>
-#include <asm/uaccess.h>
+#include "qnx4.h"
 
 #ifdef CONFIG_QNX4FS_RW
 
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index b7f5a468f07..95c5b42384b 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -159,10 +159,14 @@ static int check_quotactl_valid(struct super_block *sb, int type, int cmd,
 	return error;
 }
 
-static void quota_sync_sb(struct super_block *sb, int type)
+#ifdef CONFIG_QUOTA
+void sync_quota_sb(struct super_block *sb, int type)
 {
 	int cnt;
 
+	if (!sb->s_qcop->quota_sync)
+		return;
+
 	sb->s_qcop->quota_sync(sb, type);
 
 	if (sb_dqopt(sb)->flags & DQUOT_QUOTA_SYS_FILE)
@@ -191,17 +195,13 @@ static void quota_sync_sb(struct super_block *sb, int type)
 	}
 	mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
 }
+#endif
 
-void sync_dquots(struct super_block *sb, int type)
+static void sync_dquots(int type)
 {
+	struct super_block *sb;
 	int cnt;
 
-	if (sb) {
-		if (sb->s_qcop->quota_sync)
-			quota_sync_sb(sb, type);
-		return;
-	}
-
 	spin_lock(&sb_lock);
 restart:
 	list_for_each_entry(sb, &super_blocks, s_list) {
@@ -222,8 +222,8 @@ restart:
 		sb->s_count++;
 		spin_unlock(&sb_lock);
 		down_read(&sb->s_umount);
-		if (sb->s_root && sb->s_qcop->quota_sync)
-			quota_sync_sb(sb, type);
+		if (sb->s_root)
+			sync_quota_sb(sb, type);
 		up_read(&sb->s_umount);
 		spin_lock(&sb_lock);
 		if (__put_super_and_need_restart(sb))
@@ -301,7 +301,10 @@ static int do_quotactl(struct super_block *sb, int type, int cmd, qid_t id,
 			return sb->s_qcop->set_dqblk(sb, type, id, &idq);
 		}
 		case Q_SYNC:
-			sync_dquots(sb, type);
+			if (sb)
+				sync_quota_sb(sb, type);
+			else
+				sync_dquots(type);
 			return 0;
 
 		case Q_XQUOTAON:
diff --git a/fs/read_write.c b/fs/read_write.c
index 9d1e76bb9ee..6c8c55dec2b 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -805,12 +805,6 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
 		goto out;
 	if (!(in_file->f_mode & FMODE_READ))
 		goto fput_in;
-	retval = -EINVAL;
-	in_inode = in_file->f_path.dentry->d_inode;
-	if (!in_inode)
-		goto fput_in;
-	if (!in_file->f_op || !in_file->f_op->splice_read)
-		goto fput_in;
 	retval = -ESPIPE;
 	if (!ppos)
 		ppos = &in_file->f_pos;
@@ -834,6 +828,7 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
 	retval = -EINVAL;
 	if (!out_file->f_op || !out_file->f_op->sendpage)
 		goto fput_out;
+	in_inode = in_file->f_path.dentry->d_inode;
 	out_inode = out_file->f_path.dentry->d_inode;
 	retval = rw_verify_area(WRITE, out_file, &out_file->f_pos, count);
 	if (retval < 0)
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 45ee3d357c7..6d2668fdc38 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -44,13 +44,11 @@ static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
 static inline bool is_privroot_deh(struct dentry *dir,
 				   struct reiserfs_de_head *deh)
 {
-	int ret = 0;
-#ifdef CONFIG_REISERFS_FS_XATTR
 	struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
-	ret = (dir == dir->d_parent && privroot->d_inode &&
-	       deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
-#endif
-	return ret;
+	if (reiserfs_expose_privroot(dir->d_sb))
+		return 0;
+	return (dir == dir->d_parent && privroot->d_inode &&
+	        deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
 }
 
 int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1215a4f50cd..2969773cfc2 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -28,6 +28,7 @@
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/crc32.h>
+#include <linux/smp_lock.h>
 
 struct file_system_type reiserfs_fs_type;
 
@@ -64,18 +65,15 @@ static int reiserfs_statfs(struct dentry *dentry, struct kstatfs *buf);
 
 static int reiserfs_sync_fs(struct super_block *s, int wait)
 {
-	if (!(s->s_flags & MS_RDONLY)) {
-		struct reiserfs_transaction_handle th;
-		reiserfs_write_lock(s);
-		if (!journal_begin(&th, s, 1))
-			if (!journal_end_sync(&th, s, 1))
-				reiserfs_flush_old_commits(s);
-		s->s_dirt = 0;	/* Even if it's not true.
-				 * We'll loop forever in sync_supers otherwise */
-		reiserfs_write_unlock(s);
-	} else {
-		s->s_dirt = 0;
-	}
+	struct reiserfs_transaction_handle th;
+
+	reiserfs_write_lock(s);
+	if (!journal_begin(&th, s, 1))
+		if (!journal_end_sync(&th, s, 1))
+			reiserfs_flush_old_commits(s);
+	s->s_dirt = 0;	/* Even if it's not true.
+			 * We'll loop forever in sync_supers otherwise */
+	reiserfs_write_unlock(s);
 	return 0;
 }
 
@@ -448,13 +446,11 @@ int remove_save_link(struct inode *inode, int truncate)
 static void reiserfs_kill_sb(struct super_block *s)
 {
 	if (REISERFS_SB(s)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
 		if (REISERFS_SB(s)->xattr_root) {
 			d_invalidate(REISERFS_SB(s)->xattr_root);
 			dput(REISERFS_SB(s)->xattr_root);
 			REISERFS_SB(s)->xattr_root = NULL;
 		}
-#endif
 		if (REISERFS_SB(s)->priv_root) {
 			d_invalidate(REISERFS_SB(s)->priv_root);
 			dput(REISERFS_SB(s)->priv_root);
@@ -470,6 +466,11 @@ static void reiserfs_put_super(struct super_block *s)
 	struct reiserfs_transaction_handle th;
 	th.t_trans_id = 0;
 
+	lock_kernel();
+
+	if (s->s_dirt)
+		reiserfs_write_super(s);
+
 	/* change file system state to current state if it was mounted with read-write permissions */
 	if (!(s->s_flags & MS_RDONLY)) {
 		if (!journal_begin(&th, s, 10)) {
@@ -502,7 +503,7 @@ static void reiserfs_put_super(struct super_block *s)
 	kfree(s->s_fs_info);
 	s->s_fs_info = NULL;
 
-	return;
+	unlock_kernel();
 }
 
 static struct kmem_cache *reiserfs_inode_cachep;
@@ -900,6 +901,7 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 		{"conv",.setmask = 1 << REISERFS_CONVERT},
 		{"attrs",.setmask = 1 << REISERFS_ATTRS},
 		{"noattrs",.clrmask = 1 << REISERFS_ATTRS},
+		{"expose_privroot", .setmask = 1 << REISERFS_EXPOSE_PRIVROOT},
 #ifdef CONFIG_REISERFS_FS_XATTR
 		{"user_xattr",.setmask = 1 << REISERFS_XATTRS_USER},
 		{"nouser_xattr",.clrmask = 1 << REISERFS_XATTRS_USER},
@@ -1195,6 +1197,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 	memcpy(qf_names, REISERFS_SB(s)->s_qf_names, sizeof(qf_names));
 #endif
 
+	lock_kernel();
 	rs = SB_DISK_SUPER_BLOCK(s);
 
 	if (!reiserfs_parse_options
@@ -1317,10 +1320,12 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 
 out_ok:
 	replace_mount_options(s, new_opts);
+	unlock_kernel();
 	return 0;
 
 out_err:
 	kfree(new_opts);
+	unlock_kernel();
 	return err;
 }
 
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 2237e10c7c7..f3d47d85684 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -123,7 +123,9 @@ static struct dentry *open_xa_root(struct super_block *sb, int flags)
 	mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
 
 	xaroot = dget(REISERFS_SB(sb)->xattr_root);
-	if (!xaroot->d_inode) {
+	if (!xaroot)
+		xaroot = ERR_PTR(-ENODATA);
+	else if (!xaroot->d_inode) {
 		int err = -ENODATA;
 		if (xattr_may_create(flags))
 			err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
@@ -685,20 +687,6 @@ out:
 	return err;
 }
 
-/* Actual operations that are exported to VFS-land */
-struct xattr_handler *reiserfs_xattr_handlers[] = {
-	&reiserfs_xattr_user_handler,
-	&reiserfs_xattr_trusted_handler,
-#ifdef CONFIG_REISERFS_FS_SECURITY
-	&reiserfs_xattr_security_handler,
-#endif
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
-	&reiserfs_posix_acl_access_handler,
-	&reiserfs_posix_acl_default_handler,
-#endif
-	NULL
-};
-
 /*
  * In order to implement different sets of xattr operations for each xattr
  * prefix with the generic xattr API, a filesystem should create a
@@ -883,23 +871,6 @@ static int reiserfs_check_acl(struct inode *inode, int mask)
 	return error;
 }
 
-int reiserfs_permission(struct inode *inode, int mask)
-{
-	/*
-	 * We don't do permission checks on the internal objects.
-	 * Permissions are determined by the "owning" object.
-	 */
-	if (IS_PRIVATE(inode))
-		return 0;
-	/*
-	 * Stat data v1 doesn't support ACLs.
-	 */
-	if (get_inode_sd_version(inode) == STAT_DATA_V1)
-		return generic_permission(inode, mask, NULL);
-	else
-		return generic_permission(inode, mask, reiserfs_check_acl);
-}
-
 static int create_privroot(struct dentry *dentry)
 {
 	int err;
@@ -922,6 +893,28 @@ static int create_privroot(struct dentry *dentry)
 	return 0;
 }
 
+#else
+int __init reiserfs_xattr_register_handlers(void) { return 0; }
+void reiserfs_xattr_unregister_handlers(void) {}
+static int create_privroot(struct dentry *dentry) { return 0; }
+#endif
+
+/* Actual operations that are exported to VFS-land */
+struct xattr_handler *reiserfs_xattr_handlers[] = {
+#ifdef CONFIG_REISERFS_FS_XATTR
+	&reiserfs_xattr_user_handler,
+	&reiserfs_xattr_trusted_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_SECURITY
+	&reiserfs_xattr_security_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_POSIX_ACL
+	&reiserfs_posix_acl_access_handler,
+	&reiserfs_posix_acl_default_handler,
+#endif
+	NULL
+};
+
 static int xattr_mount_check(struct super_block *s)
 {
 	/* We need generation numbers to ensure that the oid mapping is correct
@@ -941,10 +934,24 @@ static int xattr_mount_check(struct super_block *s)
 	return 0;
 }
 
-#else
-int __init reiserfs_xattr_register_handlers(void) { return 0; }
-void reiserfs_xattr_unregister_handlers(void) {}
+int reiserfs_permission(struct inode *inode, int mask)
+{
+	/*
+	 * We don't do permission checks on the internal objects.
+	 * Permissions are determined by the "owning" object.
+	 */
+	if (IS_PRIVATE(inode))
+		return 0;
+
+#ifdef CONFIG_REISERFS_FS_XATTR
+	/*
+	 * Stat data v1 doesn't support ACLs.
+	 */
+	if (get_inode_sd_version(inode) != STAT_DATA_V1)
+		return generic_permission(inode, mask, reiserfs_check_acl);
 #endif
+	return generic_permission(inode, mask, NULL);
+}
 
 /* This will catch lookups from the fs root to .reiserfs_priv */
 static int
@@ -974,7 +981,8 @@ int reiserfs_lookup_privroot(struct super_block *s)
 				strlen(PRIVROOT_NAME));
 	if (!IS_ERR(dentry)) {
 		REISERFS_SB(s)->priv_root = dentry;
-		s->s_root->d_op = &xattr_lookup_poison_ops;
+		if (!reiserfs_expose_privroot(s))
+			s->s_root->d_op = &xattr_lookup_poison_ops;
 		if (dentry->d_inode)
 			dentry->d_inode->i_flags |= S_PRIVATE;
 	} else
@@ -992,7 +1000,6 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 	int err = 0;
 	struct dentry *privroot = REISERFS_SB(s)->priv_root;
 
-#ifdef CONFIG_REISERFS_FS_XATTR
 	err = xattr_mount_check(s);
 	if (err)
 		goto error;
@@ -1023,14 +1030,11 @@ error:
 		clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt));
 		clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt));
 	}
-#endif
 
 	/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
 	if (reiserfs_posixacl(s))
 		s->s_flags |= MS_POSIXACL;
 	else
-#endif
 		s->s_flags &= ~MS_POSIXACL;
 
 	return err;
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index fc27fbfc539..1402d2d54f5 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -474,6 +474,8 @@ smb_put_super(struct super_block *sb)
 {
 	struct smb_sb_info *server = SMB_SB(sb);
 
+	lock_kernel();
+
 	smb_lock_server(server);
 	server->state = CONN_INVALID;
 	smbiod_unregister_server(server);
@@ -489,6 +491,8 @@ smb_put_super(struct super_block *sb)
 	smb_unlock_server(server);
 	put_pid(server->conn_pid);
 	kfree(server);
+
+	unlock_kernel();
 }
 
 static int smb_fill_super(struct super_block *sb, void *raw_data, int silent)
diff --git a/fs/splice.c b/fs/splice.c
index 666953d59a3..73766d24f97 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -507,9 +507,131 @@ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
 
 	return ret;
 }
-
 EXPORT_SYMBOL(generic_file_splice_read);
 
+static const struct pipe_buf_operations default_pipe_buf_ops = {
+	.can_merge = 0,
+	.map = generic_pipe_buf_map,
+	.unmap = generic_pipe_buf_unmap,
+	.confirm = generic_pipe_buf_confirm,
+	.release = generic_pipe_buf_release,
+	.steal = generic_pipe_buf_steal,
+	.get = generic_pipe_buf_get,
+};
+
+static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
+			    unsigned long vlen, loff_t offset)
+{
+	mm_segment_t old_fs;
+	loff_t pos = offset;
+	ssize_t res;
+
+	old_fs = get_fs();
+	set_fs(get_ds());
+	/* The cast to a user pointer is valid due to the set_fs() */
+	res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos);
+	set_fs(old_fs);
+
+	return res;
+}
+
+static ssize_t kernel_write(struct file *file, const char *buf, size_t count,
+			    loff_t pos)
+{
+	mm_segment_t old_fs;
+	ssize_t res;
+
+	old_fs = get_fs();
+	set_fs(get_ds());
+	/* The cast to a user pointer is valid due to the set_fs() */
+	res = vfs_write(file, (const char __user *)buf, count, &pos);
+	set_fs(old_fs);
+
+	return res;
+}
+
+ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
+				 struct pipe_inode_info *pipe, size_t len,
+				 unsigned int flags)
+{
+	unsigned int nr_pages;
+	unsigned int nr_freed;
+	size_t offset;
+	struct page *pages[PIPE_BUFFERS];
+	struct partial_page partial[PIPE_BUFFERS];
+	struct iovec vec[PIPE_BUFFERS];
+	pgoff_t index;
+	ssize_t res;
+	size_t this_len;
+	int error;
+	int i;
+	struct splice_pipe_desc spd = {
+		.pages = pages,
+		.partial = partial,
+		.flags = flags,
+		.ops = &default_pipe_buf_ops,
+		.spd_release = spd_release_page,
+	};
+
+	index = *ppos >> PAGE_CACHE_SHIFT;
+	offset = *ppos & ~PAGE_CACHE_MASK;
+	nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+	for (i = 0; i < nr_pages && i < PIPE_BUFFERS && len; i++) {
+		struct page *page;
+
+		page = alloc_page(GFP_USER);
+		error = -ENOMEM;
+		if (!page)
+			goto err;
+
+		this_len = min_t(size_t, len, PAGE_CACHE_SIZE - offset);
+		vec[i].iov_base = (void __user *) page_address(page);
+		vec[i].iov_len = this_len;
+		pages[i] = page;
+		spd.nr_pages++;
+		len -= this_len;
+		offset = 0;
+	}
+
+	res = kernel_readv(in, vec, spd.nr_pages, *ppos);
+	if (res < 0) {
+		error = res;
+		goto err;
+	}
+
+	error = 0;
+	if (!res)
+		goto err;
+
+	nr_freed = 0;
+	for (i = 0; i < spd.nr_pages; i++) {
+		this_len = min_t(size_t, vec[i].iov_len, res);
+		partial[i].offset = 0;
+		partial[i].len = this_len;
+		if (!this_len) {
+			__free_page(pages[i]);
+			pages[i] = NULL;
+			nr_freed++;
+		}
+		res -= this_len;
+	}
+	spd.nr_pages -= nr_freed;
+
+	res = splice_to_pipe(pipe, &spd);
+	if (res > 0)
+		*ppos += res;
+
+	return res;
+
+err:
+	for (i = 0; i < spd.nr_pages; i++)
+		__free_page(pages[i]);
+
+	return error;
+}
+EXPORT_SYMBOL(default_file_splice_read);
+
 /*
  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
  * using sendpage(). Return the number of bytes sent.
@@ -881,6 +1003,36 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 
 EXPORT_SYMBOL(generic_file_splice_write);
 
+static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+			  struct splice_desc *sd)
+{
+	int ret;
+	void *data;
+
+	ret = buf->ops->confirm(pipe, buf);
+	if (ret)
+		return ret;
+
+	data = buf->ops->map(pipe, buf, 0);
+	ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
+	buf->ops->unmap(pipe, buf, data);
+
+	return ret;
+}
+
+static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
+					 struct file *out, loff_t *ppos,
+					 size_t len, unsigned int flags)
+{
+	ssize_t ret;
+
+	ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
+	if (ret > 0)
+		*ppos += ret;
+
+	return ret;
+}
+
 /**
  * generic_splice_sendpage - splice data from a pipe to a socket
  * @pipe:	pipe to splice from
@@ -908,11 +1060,10 @@ EXPORT_SYMBOL(generic_splice_sendpage);
 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 			   loff_t *ppos, size_t len, unsigned int flags)
 {
+	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
+				loff_t *, size_t, unsigned int);
 	int ret;
 
-	if (unlikely(!out->f_op || !out->f_op->splice_write))
-		return -EINVAL;
-
 	if (unlikely(!(out->f_mode & FMODE_WRITE)))
 		return -EBADF;
 
@@ -923,7 +1074,11 @@ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 	if (unlikely(ret < 0))
 		return ret;
 
-	return out->f_op->splice_write(pipe, out, ppos, len, flags);
+	splice_write = out->f_op->splice_write;
+	if (!splice_write)
+		splice_write = default_file_splice_write;
+
+	return splice_write(pipe, out, ppos, len, flags);
 }
 
 /*
@@ -933,11 +1088,10 @@ static long do_splice_to(struct file *in, loff_t *ppos,
 			 struct pipe_inode_info *pipe, size_t len,
 			 unsigned int flags)
 {
+	ssize_t (*splice_read)(struct file *, loff_t *,
+			       struct pipe_inode_info *, size_t, unsigned int);
 	int ret;
 
-	if (unlikely(!in->f_op || !in->f_op->splice_read))
-		return -EINVAL;
-
 	if (unlikely(!(in->f_mode & FMODE_READ)))
 		return -EBADF;
 
@@ -945,7 +1099,11 @@ static long do_splice_to(struct file *in, loff_t *ppos,
 	if (unlikely(ret < 0))
 		return ret;
 
-	return in->f_op->splice_read(in, ppos, pipe, len, flags);
+	splice_read = in->f_op->splice_read;
+	if (!splice_read)
+		splice_read = default_file_splice_read;
+
+	return splice_read(in, ppos, pipe, len, flags);
 }
 
 /**
@@ -1112,6 +1270,9 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
 	return ret;
 }
 
+static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
+			       struct pipe_inode_info *opipe,
+			       size_t len, unsigned int flags);
 /*
  * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
  * location, so checking ->i_pipe is not enough to verify that this is a
@@ -1132,12 +1293,32 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		      struct file *out, loff_t __user *off_out,
 		      size_t len, unsigned int flags)
 {
-	struct pipe_inode_info *pipe;
+	struct pipe_inode_info *ipipe;
+	struct pipe_inode_info *opipe;
 	loff_t offset, *off;
 	long ret;
 
-	pipe = pipe_info(in->f_path.dentry->d_inode);
-	if (pipe) {
+	ipipe = pipe_info(in->f_path.dentry->d_inode);
+	opipe = pipe_info(out->f_path.dentry->d_inode);
+
+	if (ipipe && opipe) {
+		if (off_in || off_out)
+			return -ESPIPE;
+
+		if (!(in->f_mode & FMODE_READ))
+			return -EBADF;
+
+		if (!(out->f_mode & FMODE_WRITE))
+			return -EBADF;
+
+		/* Splicing to self would be fun, but... */
+		if (ipipe == opipe)
+			return -EINVAL;
+
+		return splice_pipe_to_pipe(ipipe, opipe, len, flags);
+	}
+
+	if (ipipe) {
 		if (off_in)
 			return -ESPIPE;
 		if (off_out) {
@@ -1149,7 +1330,7 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		} else
 			off = &out->f_pos;
 
-		ret = do_splice_from(pipe, out, off, len, flags);
+		ret = do_splice_from(ipipe, out, off, len, flags);
 
 		if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
 			ret = -EFAULT;
@@ -1157,8 +1338,7 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		return ret;
 	}
 
-	pipe = pipe_info(out->f_path.dentry->d_inode);
-	if (pipe) {
+	if (opipe) {
 		if (off_out)
 			return -ESPIPE;
 		if (off_in) {
@@ -1170,7 +1350,7 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		} else
 			off = &in->f_pos;
 
-		ret = do_splice_to(in, off, pipe, len, flags);
+		ret = do_splice_to(in, off, opipe, len, flags);
 
 		if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
 			ret = -EFAULT;
@@ -1511,7 +1691,7 @@ SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
  * Make sure there's data to read. Wait for input if we can, otherwise
  * return an appropriate error.
  */
-static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
+static int ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 {
 	int ret;
 
@@ -1549,7 +1729,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
  * Make sure there's writeable room. Wait for room if we can, otherwise
  * return an appropriate error.
  */
-static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
+static int opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 {
 	int ret;
 
@@ -1587,6 +1767,124 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 }
 
 /*
+ * Splice contents of ipipe to opipe.
+ */
+static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
+			       struct pipe_inode_info *opipe,
+			       size_t len, unsigned int flags)
+{
+	struct pipe_buffer *ibuf, *obuf;
+	int ret = 0, nbuf;
+	bool input_wakeup = false;
+
+
+retry:
+	ret = ipipe_prep(ipipe, flags);
+	if (ret)
+		return ret;
+
+	ret = opipe_prep(opipe, flags);
+	if (ret)
+		return ret;
+
+	/*
+	 * Potential ABBA deadlock, work around it by ordering lock
+	 * grabbing by pipe info address. Otherwise two different processes
+	 * could deadlock (one doing tee from A -> B, the other from B -> A).
+	 */
+	pipe_double_lock(ipipe, opipe);
+
+	do {
+		if (!opipe->readers) {
+			send_sig(SIGPIPE, current, 0);
+			if (!ret)
+				ret = -EPIPE;
+			break;
+		}
+
+		if (!ipipe->nrbufs && !ipipe->writers)
+			break;
+
+		/*
+		 * Cannot make any progress, because either the input
+		 * pipe is empty or the output pipe is full.
+		 */
+		if (!ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS) {
+			/* Already processed some buffers, break */
+			if (ret)
+				break;
+
+			if (flags & SPLICE_F_NONBLOCK) {
+				ret = -EAGAIN;
+				break;
+			}
+
+			/*
+			 * We raced with another reader/writer and haven't
+			 * managed to process any buffers.  A zero return
+			 * value means EOF, so retry instead.
+			 */
+			pipe_unlock(ipipe);
+			pipe_unlock(opipe);
+			goto retry;
+		}
+
+		ibuf = ipipe->bufs + ipipe->curbuf;
+		nbuf = (opipe->curbuf + opipe->nrbufs) % PIPE_BUFFERS;
+		obuf = opipe->bufs + nbuf;
+
+		if (len >= ibuf->len) {
+			/*
+			 * Simply move the whole buffer from ipipe to opipe
+			 */
+			*obuf = *ibuf;
+			ibuf->ops = NULL;
+			opipe->nrbufs++;
+			ipipe->curbuf = (ipipe->curbuf + 1) % PIPE_BUFFERS;
+			ipipe->nrbufs--;
+			input_wakeup = true;
+		} else {
+			/*
+			 * Get a reference to this pipe buffer,
+			 * so we can copy the contents over.
+			 */
+			ibuf->ops->get(ipipe, ibuf);
+			*obuf = *ibuf;
+
+			/*
+			 * Don't inherit the gift flag, we need to
+			 * prevent multiple steals of this page.
+			 */
+			obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
+
+			obuf->len = len;
+			opipe->nrbufs++;
+			ibuf->offset += obuf->len;
+			ibuf->len -= obuf->len;
+		}
+		ret += obuf->len;
+		len -= obuf->len;
+	} while (len);
+
+	pipe_unlock(ipipe);
+	pipe_unlock(opipe);
+
+	/*
+	 * If we put data in the output pipe, wakeup any potential readers.
+	 */
+	if (ret > 0) {
+		smp_mb();
+		if (waitqueue_active(&opipe->wait))
+			wake_up_interruptible(&opipe->wait);
+		kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
+	}
+	if (input_wakeup)
+		wakeup_pipe_writers(ipipe);
+
+	return ret;
+}
+
+/*
  * Link contents of ipipe to opipe.
  */
 static int link_pipe(struct pipe_inode_info *ipipe,
@@ -1690,9 +1988,9 @@ static long do_tee(struct file *in, struct file *out, size_t len,
 		 * Keep going, unless we encounter an error. The ipipe/opipe
 		 * ordering doesn't really matter.
 		 */
-		ret = link_ipipe_prep(ipipe, flags);
+		ret = ipipe_prep(ipipe, flags);
 		if (!ret) {
-			ret = link_opipe_prep(opipe, flags);
+			ret = opipe_prep(opipe, flags);
 			if (!ret)
 				ret = link_pipe(ipipe, opipe, len, flags);
 		}
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 0adc624c956..3b52770f46f 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -338,6 +338,8 @@ static int squashfs_remount(struct super_block *sb, int *flags, char *data)
 
 static void squashfs_put_super(struct super_block *sb)
 {
+	lock_kernel();
+
 	if (sb->s_fs_info) {
 		struct squashfs_sb_info *sbi = sb->s_fs_info;
 		squashfs_cache_delete(sbi->block_cache);
@@ -350,6 +352,8 @@ static void squashfs_put_super(struct super_block *sb)
 		kfree(sb->s_fs_info);
 		sb->s_fs_info = NULL;
 	}
+
+	unlock_kernel();
 }
 
 
diff --git a/fs/super.c b/fs/super.c
index 1943fdf655f..83b47416d00 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -28,7 +28,6 @@
 #include <linux/blkdev.h>
 #include <linux/quotaops.h>
 #include <linux/namei.h>
-#include <linux/buffer_head.h>		/* for fsync_super() */
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
@@ -38,7 +37,6 @@
 #include <linux/kobject.h>
 #include <linux/mutex.h>
 #include <linux/file.h>
-#include <linux/async.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
@@ -72,7 +70,6 @@ static struct super_block *alloc_super(struct file_system_type *type)
 		INIT_HLIST_HEAD(&s->s_anon);
 		INIT_LIST_HEAD(&s->s_inodes);
 		INIT_LIST_HEAD(&s->s_dentry_lru);
-		INIT_LIST_HEAD(&s->s_async_list);
 		init_rwsem(&s->s_umount);
 		mutex_init(&s->s_lock);
 		lockdep_set_class(&s->s_umount, &type->s_umount_key);
@@ -285,38 +282,6 @@ void unlock_super(struct super_block * sb)
 EXPORT_SYMBOL(lock_super);
 EXPORT_SYMBOL(unlock_super);
 
-/*
- * Write out and wait upon all dirty data associated with this
- * superblock.  Filesystem data as well as the underlying block
- * device.  Takes the superblock lock.  Requires a second blkdev
- * flush by the caller to complete the operation.
- */
-void __fsync_super(struct super_block *sb)
-{
-	sync_inodes_sb(sb, 0);
-	vfs_dq_sync(sb);
-	lock_super(sb);
-	if (sb->s_dirt && sb->s_op->write_super)
-		sb->s_op->write_super(sb);
-	unlock_super(sb);
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
-	sync_blockdev(sb->s_bdev);
-	sync_inodes_sb(sb, 1);
-}
-
-/*
- * Write out and wait upon all dirty data associated with this
- * superblock.  Filesystem data as well as the underlying block
- * device.  Takes the superblock lock.
- */
-int fsync_super(struct super_block *sb)
-{
-	__fsync_super(sb);
-	return sync_blockdev(sb->s_bdev);
-}
-EXPORT_SYMBOL_GPL(fsync_super);
-
 /**
  *	generic_shutdown_super	-	common helper for ->kill_sb()
  *	@sb: superblock to kill
@@ -338,21 +303,13 @@ void generic_shutdown_super(struct super_block *sb)
 
 	if (sb->s_root) {
 		shrink_dcache_for_umount(sb);
-		fsync_super(sb);
-		lock_super(sb);
+		sync_filesystem(sb);
+		get_fs_excl();
 		sb->s_flags &= ~MS_ACTIVE;
 
-		/*
-		 * wait for asynchronous fs operations to finish before going further
-		 */
-		async_synchronize_full_domain(&sb->s_async_list);
-
 		/* bad name - it should be evict_inodes() */
 		invalidate_inodes(sb);
-		lock_kernel();
 
-		if (sop->write_super && sb->s_dirt)
-			sop->write_super(sb);
 		if (sop->put_super)
 			sop->put_super(sb);
 
@@ -362,9 +319,7 @@ void generic_shutdown_super(struct super_block *sb)
 			   "Self-destruct in 5 seconds.  Have a nice day...\n",
 			   sb->s_id);
 		}
-
-		unlock_kernel();
-		unlock_super(sb);
+		put_fs_excl();
 	}
 	spin_lock(&sb_lock);
 	/* should be initialized for __put_super_and_need_restart() */
@@ -441,16 +396,14 @@ void drop_super(struct super_block *sb)
 
 EXPORT_SYMBOL(drop_super);
 
-static inline void write_super(struct super_block *sb)
-{
-	lock_super(sb);
-	if (sb->s_root && sb->s_dirt)
-		if (sb->s_op->write_super)
-			sb->s_op->write_super(sb);
-	unlock_super(sb);
-}
-
-/*
+/**
+ * sync_supers - helper for periodic superblock writeback
+ *
+ * Call the write_super method if present on all dirty superblocks in
+ * the system.  This is for the periodic writeback used by most older
+ * filesystems.  For data integrity superblock writeback use
+ * sync_filesystems() instead.
+ *
  * Note: check the dirty flag before waiting, so we don't
  * hold up the sync while mounting a device. (The newly
  * mounted device won't need syncing.)
@@ -462,12 +415,15 @@ void sync_supers(void)
 	spin_lock(&sb_lock);
 restart:
 	list_for_each_entry(sb, &super_blocks, s_list) {
-		if (sb->s_dirt) {
+		if (sb->s_op->write_super && sb->s_dirt) {
 			sb->s_count++;
 			spin_unlock(&sb_lock);
+
 			down_read(&sb->s_umount);
-			write_super(sb);
+			if (sb->s_root && sb->s_dirt)
+				sb->s_op->write_super(sb);
 			up_read(&sb->s_umount);
+
 			spin_lock(&sb_lock);
 			if (__put_super_and_need_restart(sb))
 				goto restart;
@@ -476,60 +432,6 @@ restart:
 	spin_unlock(&sb_lock);
 }
 
-/*
- * Call the ->sync_fs super_op against all filesystems which are r/w and
- * which implement it.
- *
- * This operation is careful to avoid the livelock which could easily happen
- * if two or more filesystems are being continuously dirtied.  s_need_sync_fs
- * is used only here.  We set it against all filesystems and then clear it as
- * we sync them.  So redirtied filesystems are skipped.
- *
- * But if process A is currently running sync_filesystems and then process B
- * calls sync_filesystems as well, process B will set all the s_need_sync_fs
- * flags again, which will cause process A to resync everything.  Fix that with
- * a local mutex.
- *
- * (Fabian) Avoid sync_fs with clean fs & wait mode 0
- */
-void sync_filesystems(int wait)
-{
-	struct super_block *sb;
-	static DEFINE_MUTEX(mutex);
-
-	mutex_lock(&mutex);		/* Could be down_interruptible */
-	spin_lock(&sb_lock);
-	list_for_each_entry(sb, &super_blocks, s_list) {
-		if (!sb->s_op->sync_fs)
-			continue;
-		if (sb->s_flags & MS_RDONLY)
-			continue;
-		sb->s_need_sync_fs = 1;
-	}
-
-restart:
-	list_for_each_entry(sb, &super_blocks, s_list) {
-		if (!sb->s_need_sync_fs)
-			continue;
-		sb->s_need_sync_fs = 0;
-		if (sb->s_flags & MS_RDONLY)
-			continue;	/* hm.  Was remounted r/o meanwhile */
-		sb->s_count++;
-		spin_unlock(&sb_lock);
-		down_read(&sb->s_umount);
-		async_synchronize_full_domain(&sb->s_async_list);
-		if (sb->s_root && (wait || sb->s_dirt))
-			sb->s_op->sync_fs(sb, wait);
-		up_read(&sb->s_umount);
-		/* restart only when sb is no longer on the list */
-		spin_lock(&sb_lock);
-		if (__put_super_and_need_restart(sb))
-			goto restart;
-	}
-	spin_unlock(&sb_lock);
-	mutex_unlock(&mutex);
-}
-
 /**
  *	get_super - get the superblock of a device
  *	@bdev: device to get the superblock for
@@ -616,45 +518,6 @@ out:
 }
 
 /**
- *	mark_files_ro - mark all files read-only
- *	@sb: superblock in question
- *
- *	All files are marked read-only.  We don't care about pending
- *	delete files so this should be used in 'force' mode only.
- */
-
-static void mark_files_ro(struct super_block *sb)
-{
-	struct file *f;
-
-retry:
-	file_list_lock();
-	list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
-		struct vfsmount *mnt;
-		if (!S_ISREG(f->f_path.dentry->d_inode->i_mode))
-		       continue;
-		if (!file_count(f))
-			continue;
-		if (!(f->f_mode & FMODE_WRITE))
-			continue;
-		f->f_mode &= ~FMODE_WRITE;
-		if (file_check_writeable(f) != 0)
-			continue;
-		file_release_write(f);
-		mnt = mntget(f->f_path.mnt);
-		file_list_unlock();
-		/*
-		 * This can sleep, so we can't hold
-		 * the file_list_lock() spinlock.
-		 */
-		mnt_drop_write(mnt);
-		mntput(mnt);
-		goto retry;
-	}
-	file_list_unlock();
-}
-
-/**
  *	do_remount_sb - asks filesystem to change mount options.
  *	@sb:	superblock in question
  *	@flags:	numeric part of options
@@ -675,27 +538,31 @@ int do_remount_sb(struct super_block *sb, int flags, void *data, int force)
 	if (flags & MS_RDONLY)
 		acct_auto_close(sb);
 	shrink_dcache_sb(sb);
-	fsync_super(sb);
+	sync_filesystem(sb);
 
 	/* If we are remounting RDONLY and current sb is read/write,
 	   make sure there are no rw files opened */
 	if ((flags & MS_RDONLY) && !(sb->s_flags & MS_RDONLY)) {
 		if (force)
 			mark_files_ro(sb);
-		else if (!fs_may_remount_ro(sb))
+		else if (!fs_may_remount_ro(sb)) {
+			unlock_kernel();
 			return -EBUSY;
+		}
 		retval = vfs_dq_off(sb, 1);
-		if (retval < 0 && retval != -ENOSYS)
+		if (retval < 0 && retval != -ENOSYS) {
+			unlock_kernel();
 			return -EBUSY;
+		}
 	}
 	remount_rw = !(flags & MS_RDONLY) && (sb->s_flags & MS_RDONLY);
 
 	if (sb->s_op->remount_fs) {
-		lock_super(sb);
 		retval = sb->s_op->remount_fs(sb, &flags, data);
-		unlock_super(sb);
-		if (retval)
+		if (retval) {
+			unlock_kernel();
 			return retval;
+		}
 	}
 	sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
 	if (remount_rw)
@@ -711,18 +578,17 @@ static void do_emergency_remount(struct work_struct *work)
 	list_for_each_entry(sb, &super_blocks, s_list) {
 		sb->s_count++;
 		spin_unlock(&sb_lock);
-		down_read(&sb->s_umount);
+		down_write(&sb->s_umount);
 		if (sb->s_root && sb->s_bdev && !(sb->s_flags & MS_RDONLY)) {
 			/*
 			 * ->remount_fs needs lock_kernel().
 			 *
 			 * What lock protects sb->s_flags??
 			 */
-			lock_kernel();
 			do_remount_sb(sb, MS_RDONLY, NULL, 1);
-			unlock_kernel();
 		}
-		drop_super(sb);
+		up_write(&sb->s_umount);
+		put_super(sb);
 		spin_lock(&sb_lock);
 	}
 	spin_unlock(&sb_lock);
diff --git a/fs/sync.c b/fs/sync.c
index 7abc65fbf21..dd200025af8 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -13,38 +13,123 @@
 #include <linux/pagemap.h>
 #include <linux/quotaops.h>
 #include <linux/buffer_head.h>
+#include "internal.h"
 
 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
 			SYNC_FILE_RANGE_WAIT_AFTER)
 
 /*
- * sync everything.  Start out by waking pdflush, because that writes back
- * all queues in parallel.
+ * Do the filesystem syncing work. For simple filesystems sync_inodes_sb(sb, 0)
+ * just dirties buffers with inodes so we have to submit IO for these buffers
+ * via __sync_blockdev(). This also speeds up the wait == 1 case since in that
+ * case write_inode() functions do sync_dirty_buffer() and thus effectively
+ * write one block at a time.
  */
-static void do_sync(unsigned long wait)
+static int __sync_filesystem(struct super_block *sb, int wait)
 {
-	wakeup_pdflush(0);
-	sync_inodes(0);		/* All mappings, inodes and their blockdevs */
-	vfs_dq_sync(NULL);
-	sync_supers();		/* Write the superblocks */
-	sync_filesystems(0);	/* Start syncing the filesystems */
-	sync_filesystems(wait);	/* Waitingly sync the filesystems */
-	sync_inodes(wait);	/* Mappings, inodes and blockdevs, again. */
+	/* Avoid doing twice syncing and cache pruning for quota sync */
 	if (!wait)
-		printk("Emergency Sync complete\n");
-	if (unlikely(laptop_mode))
-		laptop_sync_completion();
+		writeout_quota_sb(sb, -1);
+	else
+		sync_quota_sb(sb, -1);
+	sync_inodes_sb(sb, wait);
+	if (sb->s_op->sync_fs)
+		sb->s_op->sync_fs(sb, wait);
+	return __sync_blockdev(sb->s_bdev, wait);
+}
+
+/*
+ * Write out and wait upon all dirty data associated with this
+ * superblock.  Filesystem data as well as the underlying block
+ * device.  Takes the superblock lock.
+ */
+int sync_filesystem(struct super_block *sb)
+{
+	int ret;
+
+	/*
+	 * We need to be protected against the filesystem going from
+	 * r/o to r/w or vice versa.
+	 */
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+	/*
+	 * No point in syncing out anything if the filesystem is read-only.
+	 */
+	if (sb->s_flags & MS_RDONLY)
+		return 0;
+
+	ret = __sync_filesystem(sb, 0);
+	if (ret < 0)
+		return ret;
+	return __sync_filesystem(sb, 1);
+}
+EXPORT_SYMBOL_GPL(sync_filesystem);
+
+/*
+ * Sync all the data for all the filesystems (called by sys_sync() and
+ * emergency sync)
+ *
+ * This operation is careful to avoid the livelock which could easily happen
+ * if two or more filesystems are being continuously dirtied.  s_need_sync
+ * is used only here.  We set it against all filesystems and then clear it as
+ * we sync them.  So redirtied filesystems are skipped.
+ *
+ * But if process A is currently running sync_filesystems and then process B
+ * calls sync_filesystems as well, process B will set all the s_need_sync
+ * flags again, which will cause process A to resync everything.  Fix that with
+ * a local mutex.
+ */
+static void sync_filesystems(int wait)
+{
+	struct super_block *sb;
+	static DEFINE_MUTEX(mutex);
+
+	mutex_lock(&mutex);		/* Could be down_interruptible */
+	spin_lock(&sb_lock);
+	list_for_each_entry(sb, &super_blocks, s_list)
+		sb->s_need_sync = 1;
+
+restart:
+	list_for_each_entry(sb, &super_blocks, s_list) {
+		if (!sb->s_need_sync)
+			continue;
+		sb->s_need_sync = 0;
+		sb->s_count++;
+		spin_unlock(&sb_lock);
+
+		down_read(&sb->s_umount);
+		if (!(sb->s_flags & MS_RDONLY) && sb->s_root)
+			__sync_filesystem(sb, wait);
+		up_read(&sb->s_umount);
+
+		/* restart only when sb is no longer on the list */
+		spin_lock(&sb_lock);
+		if (__put_super_and_need_restart(sb))
+			goto restart;
+	}
+	spin_unlock(&sb_lock);
+	mutex_unlock(&mutex);
 }
 
 SYSCALL_DEFINE0(sync)
 {
-	do_sync(1);
+	sync_filesystems(0);
+	sync_filesystems(1);
+	if (unlikely(laptop_mode))
+		laptop_sync_completion();
 	return 0;
 }
 
 static void do_sync_work(struct work_struct *work)
 {
-	do_sync(0);
+	/*
+	 * Sync twice to reduce the possibility we skipped some inodes / pages
+	 * because they were temporarily locked
+	 */
+	sync_filesystems(0);
+	sync_filesystems(0);
+	printk("Emergency Sync complete\n");
 	kfree(work);
 }
 
@@ -75,10 +160,8 @@ int file_fsync(struct file *filp, struct dentry *dentry, int datasync)
 
 	/* sync the superblock to buffers */
 	sb = inode->i_sb;
-	lock_super(sb);
 	if (sb->s_dirt && sb->s_op->write_super)
 		sb->s_op->write_super(sb);
-	unlock_super(sb);
 
 	/* .. finally sync the buffers to disk */
 	err = sync_blockdev(sb->s_bdev);
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index b1606e07b7a..561a9c050ce 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -723,7 +723,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
 	mutex_unlock(&sysfs_workq_mutex);
 
 	if (sysfs_workqueue == NULL) {
-		sysfs_workqueue = create_workqueue("sysfsd");
+		sysfs_workqueue = create_singlethread_workqueue("sysfsd");
 		if (sysfs_workqueue == NULL) {
 			module_put(owner);
 			return -ENOMEM;
diff --git a/fs/sysv/dir.c b/fs/sysv/dir.c
index 56f655254bf..c7798079e64 100644
--- a/fs/sysv/dir.c
+++ b/fs/sysv/dir.c
@@ -24,7 +24,7 @@ static int sysv_readdir(struct file *, void *, filldir_t);
 const struct file_operations sysv_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= sysv_readdir,
-	.fsync		= sysv_sync_file,
+	.fsync		= simple_fsync,
 };
 
 static inline void dir_put_page(struct page *page)
diff --git a/fs/sysv/file.c b/fs/sysv/file.c
index 589be21d884..96340c01f4a 100644
--- a/fs/sysv/file.c
+++ b/fs/sysv/file.c
@@ -26,7 +26,7 @@ const struct file_operations sysv_file_operations = {
 	.write		= do_sync_write,
 	.aio_write	= generic_file_aio_write,
 	.mmap		= generic_file_mmap,
-	.fsync		= sysv_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 };
 
@@ -34,18 +34,3 @@ const struct inode_operations sysv_file_inode_operations = {
 	.truncate	= sysv_truncate,
 	.getattr	= sysv_getattr,
 };
-
-int sysv_sync_file(struct file * file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-	
-	err |= sysv_sync_inode(inode);
-	return err ? -EIO : 0;
-}
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index da20b48d350..479923456a5 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -31,15 +31,13 @@
 #include <asm/byteorder.h>
 #include "sysv.h"
 
-/* This is only called on sync() and umount(), when s_dirt=1. */
-static void sysv_write_super(struct super_block *sb)
+static int sysv_sync_fs(struct super_block *sb, int wait)
 {
 	struct sysv_sb_info *sbi = SYSV_SB(sb);
 	unsigned long time = get_seconds(), old_time;
 
+	lock_super(sb);
 	lock_kernel();
-	if (sb->s_flags & MS_RDONLY)
-		goto clean;
 
 	/*
 	 * If we are going to write out the super block,
@@ -53,18 +51,30 @@ static void sysv_write_super(struct super_block *sb)
 		*sbi->s_sb_time = cpu_to_fs32(sbi, time);
 		mark_buffer_dirty(sbi->s_bh2);
 	}
-clean:
-	sb->s_dirt = 0;
+
 	unlock_kernel();
+	unlock_super(sb);
+
+	return 0;
+}
+
+static void sysv_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		sysv_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static int sysv_remount(struct super_block *sb, int *flags, char *data)
 {
 	struct sysv_sb_info *sbi = SYSV_SB(sb);
+	lock_super(sb);
 	if (sbi->s_forced_ro)
 		*flags |= MS_RDONLY;
 	if (!(*flags & MS_RDONLY))
 		sb->s_dirt = 1;
+	unlock_super(sb);
 	return 0;
 }
 
@@ -72,6 +82,11 @@ static void sysv_put_super(struct super_block *sb)
 {
 	struct sysv_sb_info *sbi = SYSV_SB(sb);
 
+	lock_kernel();
+
+	if (sb->s_dirt)
+		sysv_write_super(sb);
+
 	if (!(sb->s_flags & MS_RDONLY)) {
 		/* XXX ext2 also updates the state here */
 		mark_buffer_dirty(sbi->s_bh1);
@@ -84,6 +99,8 @@ static void sysv_put_super(struct super_block *sb)
 		brelse(sbi->s_bh2);
 
 	kfree(sbi);
+
+	unlock_kernel();
 }
 
 static int sysv_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -236,7 +253,7 @@ bad_inode:
 	return ERR_PTR(-EIO);
 }
 
-static struct buffer_head * sysv_update_inode(struct inode * inode)
+int sysv_write_inode(struct inode *inode, int wait)
 {
 	struct super_block * sb = inode->i_sb;
 	struct sysv_sb_info * sbi = SYSV_SB(sb);
@@ -244,19 +261,21 @@ static struct buffer_head * sysv_update_inode(struct inode * inode)
 	struct sysv_inode * raw_inode;
 	struct sysv_inode_info * si;
 	unsigned int ino, block;
+	int err = 0;
 
 	ino = inode->i_ino;
 	if (!ino || ino > sbi->s_ninodes) {
 		printk("Bad inode number on dev %s: %d is out of range\n",
 		       inode->i_sb->s_id, ino);
-		return NULL;
+		return -EIO;
 	}
 	raw_inode = sysv_raw_inode(sb, ino, &bh);
 	if (!raw_inode) {
 		printk("unable to read i-node block\n");
-		return NULL;
+		return -EIO;
 	}
 
+	lock_kernel();
 	raw_inode->i_mode = cpu_to_fs16(sbi, inode->i_mode);
 	raw_inode->i_uid = cpu_to_fs16(sbi, fs_high2lowuid(inode->i_uid));
 	raw_inode->i_gid = cpu_to_fs16(sbi, fs_high2lowgid(inode->i_gid));
@@ -272,38 +291,23 @@ static struct buffer_head * sysv_update_inode(struct inode * inode)
 	for (block = 0; block < 10+1+1+1; block++)
 		write3byte(sbi, (u8 *)&si->i_data[block],
 			&raw_inode->i_data[3*block]);
+	unlock_kernel();
 	mark_buffer_dirty(bh);
-	return bh;
-}
-
-int sysv_write_inode(struct inode * inode, int wait)
-{
-	struct buffer_head *bh;
-	lock_kernel();
-	bh = sysv_update_inode(inode);
+	if (wait) {
+                sync_dirty_buffer(bh);
+                if (buffer_req(bh) && !buffer_uptodate(bh)) {
+                        printk ("IO error syncing sysv inode [%s:%08x]\n",
+                                sb->s_id, ino);
+                        err = -EIO;
+                }
+        }
 	brelse(bh);
-	unlock_kernel();
 	return 0;
 }
 
-int sysv_sync_inode(struct inode * inode)
+int sysv_sync_inode(struct inode *inode)
 {
-        int err = 0;
-        struct buffer_head *bh;
-
-        bh = sysv_update_inode(inode);
-        if (bh && buffer_dirty(bh)) {
-                sync_dirty_buffer(bh);
-                if (buffer_req(bh) && !buffer_uptodate(bh)) {
-                        printk ("IO error syncing sysv inode [%s:%08lx]\n",
-                                inode->i_sb->s_id, inode->i_ino);
-                        err = -1;
-                }
-        }
-        else if (!bh)
-                err = -1;
-        brelse (bh);
-        return err;
+	return sysv_write_inode(inode, 1);
 }
 
 static void sysv_delete_inode(struct inode *inode)
@@ -347,6 +351,7 @@ const struct super_operations sysv_sops = {
 	.delete_inode	= sysv_delete_inode,
 	.put_super	= sysv_put_super,
 	.write_super	= sysv_write_super,
+	.sync_fs	= sysv_sync_fs,
 	.remount_fs	= sysv_remount,
 	.statfs		= sysv_statfs,
 };
diff --git a/fs/sysv/sysv.h b/fs/sysv/sysv.h
index 5784a318c88..53786eb5cf6 100644
--- a/fs/sysv/sysv.h
+++ b/fs/sysv/sysv.h
@@ -144,7 +144,6 @@ extern int __sysv_write_begin(struct file *file, struct address_space *mapping,
 extern struct inode *sysv_iget(struct super_block *, unsigned int);
 extern int sysv_write_inode(struct inode *, int);
 extern int sysv_sync_inode(struct inode *);
-extern int sysv_sync_file(struct file *, struct dentry *, int);
 extern void sysv_set_inode(struct inode *, dev_t);
 extern int sysv_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 extern int sysv_init_icache(void);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index e9f7a754c4f..3589eab02a2 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -36,6 +36,7 @@
 #include <linux/mount.h>
 #include <linux/math64.h>
 #include <linux/writeback.h>
+#include <linux/smp_lock.h>
 #include "ubifs.h"
 
 /*
@@ -447,9 +448,6 @@ static int ubifs_sync_fs(struct super_block *sb, int wait)
 	if (!wait)
 		return 0;
 
-	if (sb->s_flags & MS_RDONLY)
-		return 0;
-
 	/*
 	 * VFS calls '->sync_fs()' before synchronizing all dirty inodes and
 	 * pages, so synchronize them first, then commit the journal. Strictly
@@ -1687,6 +1685,9 @@ static void ubifs_put_super(struct super_block *sb)
 
 	ubifs_msg("un-mount UBI device %d, volume %d", c->vi.ubi_num,
 		  c->vi.vol_id);
+
+	lock_kernel();
+
 	/*
 	 * The following asserts are only valid if there has not been a failure
 	 * of the media. For example, there will be dirty inodes if we failed
@@ -1753,6 +1754,8 @@ static void ubifs_put_super(struct super_block *sb)
 	ubi_close_volume(c->ubi);
 	mutex_unlock(&c->umount_mutex);
 	kfree(c);
+
+	unlock_kernel();
 }
 
 static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
@@ -1768,17 +1771,22 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 		return err;
 	}
 
+	lock_kernel();
 	if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
 		if (c->ro_media) {
 			ubifs_msg("cannot re-mount due to prior errors");
+			unlock_kernel();
 			return -EROFS;
 		}
 		err = ubifs_remount_rw(c);
-		if (err)
+		if (err) {
+			unlock_kernel();
 			return err;
+		}
 	} else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) {
 		if (c->ro_media) {
 			ubifs_msg("cannot re-mount due to prior errors");
+			unlock_kernel();
 			return -EROFS;
 		}
 		ubifs_remount_ro(c);
@@ -1793,6 +1801,7 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 	}
 
 	ubifs_assert(c->lst.taken_empty_lebs > 0);
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/fs/udf/Makefile b/fs/udf/Makefile
index 0d4503f7446..eb880f66c23 100644
--- a/fs/udf/Makefile
+++ b/fs/udf/Makefile
@@ -5,5 +5,5 @@
 obj-$(CONFIG_UDF_FS) += udf.o
 
 udf-objs     := balloc.o dir.o file.o ialloc.o inode.o lowlevel.o namei.o \
-		partition.o super.o truncate.o symlink.o fsync.o \
+		partition.o super.o truncate.o symlink.o \
 		directory.o misc.o udftime.o unicode.o
diff --git a/fs/udf/dir.c b/fs/udf/dir.c
index 2efd4d5291b..61d9a76a3a6 100644
--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -210,5 +210,5 @@ const struct file_operations udf_dir_operations = {
 	.read			= generic_read_dir,
 	.readdir		= udf_readdir,
 	.ioctl			= udf_ioctl,
-	.fsync			= udf_fsync_file,
+	.fsync			= simple_fsync,
 };
diff --git a/fs/udf/file.c b/fs/udf/file.c
index eb91f3b7032..7464305382b 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -209,7 +209,7 @@ const struct file_operations udf_file_operations = {
 	.write			= do_sync_write,
 	.aio_write		= udf_file_aio_write,
 	.release		= udf_release_file,
-	.fsync			= udf_fsync_file,
+	.fsync			= simple_fsync,
 	.splice_read		= generic_file_splice_read,
 	.llseek			= generic_file_llseek,
 };
diff --git a/fs/udf/fsync.c b/fs/udf/fsync.c
deleted file mode 100644
index b2c472b733b..00000000000
--- a/fs/udf/fsync.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * fsync.c
- *
- * PURPOSE
- *  Fsync handling routines for the OSTA-UDF(tm) filesystem.
- *
- * COPYRIGHT
- *  This file is distributed under the terms of the GNU General Public
- *  License (GPL). Copies of the GPL can be obtained from:
- *      ftp://prep.ai.mit.edu/pub/gnu/GPL
- *  Each contributing author retains all rights to their own work.
- *
- *  (C) 1999-2001 Ben Fennema
- *  (C) 1999-2000 Stelias Computing Inc
- *
- * HISTORY
- *
- *  05/22/99 blf  Created.
- */
-
-#include "udfdecl.h"
-
-#include <linux/fs.h>
-
-static int udf_fsync_inode(struct inode *, int);
-
-/*
- *	File may be NULL when we are called. Perhaps we shouldn't
- *	even pass file to fsync ?
- */
-
-int udf_fsync_file(struct file *file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-
-	return udf_fsync_inode(inode, datasync);
-}
-
-static int udf_fsync_inode(struct inode *inode, int datasync)
-{
-	int err;
-
-	err = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return err;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return err;
-
-	err |= udf_sync_inode(inode);
-
-	return err ? -EIO : 0;
-}
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 72348cc855a..6832135159b 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -568,6 +568,7 @@ static int udf_remount_fs(struct super_block *sb, int *flags, char *options)
 	if (!udf_parse_options(options, &uopt, true))
 		return -EINVAL;
 
+	lock_kernel();
 	sbi->s_flags = uopt.flags;
 	sbi->s_uid   = uopt.uid;
 	sbi->s_gid   = uopt.gid;
@@ -581,13 +582,16 @@ static int udf_remount_fs(struct super_block *sb, int *flags, char *options)
 			*flags |= MS_RDONLY;
 	}
 
-	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
+		unlock_kernel();
 		return 0;
+	}
 	if (*flags & MS_RDONLY)
 		udf_close_lvid(sb);
 	else
 		udf_open_lvid(sb);
 
+	unlock_kernel();
 	return 0;
 }
 
@@ -1915,7 +1919,7 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent)
 	if (uopt.flags & (1 << UDF_FLAG_BLOCKSIZE_SET)) {
 		ret = udf_load_vrs(sb, &uopt, silent, &fileset);
 	} else {
-		uopt.blocksize = bdev_hardsect_size(sb->s_bdev);
+		uopt.blocksize = bdev_logical_block_size(sb->s_bdev);
 		ret = udf_load_vrs(sb, &uopt, silent, &fileset);
 		if (!ret && uopt.blocksize != UDF_DEFAULT_BLOCKSIZE) {
 			if (!silent)
@@ -2062,6 +2066,9 @@ static void udf_put_super(struct super_block *sb)
 	struct udf_sb_info *sbi;
 
 	sbi = UDF_SB(sb);
+
+	lock_kernel();
+
 	if (sbi->s_vat_inode)
 		iput(sbi->s_vat_inode);
 	if (sbi->s_partitions)
@@ -2077,6 +2084,8 @@ static void udf_put_super(struct super_block *sb)
 	kfree(sbi->s_partmaps);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
+
+	unlock_kernel();
 }
 
 static int udf_sync_fs(struct super_block *sb, int wait)
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index cac51b77a5d..8d46f4294ee 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -223,9 +223,6 @@ extern int udf_prealloc_blocks(struct super_block *, struct inode *, uint16_t,
 extern int udf_new_block(struct super_block *, struct inode *, uint16_t,
 			 uint32_t, int *);
 
-/* fsync.c */
-extern int udf_fsync_file(struct file *, struct dentry *, int);
-
 /* directory.c */
 extern struct fileIdentDesc *udf_fileident_read(struct inode *, loff_t *,
 						struct udf_fileident_bh *,
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index 6321b797061..6f671f1ac27 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -666,6 +666,6 @@ not_empty:
 const struct file_operations ufs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= ufs_readdir,
-	.fsync		= ufs_sync_file,
+	.fsync		= simple_fsync,
 	.llseek		= generic_file_llseek,
 };
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index 2bd3a161571..73655c61240 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -24,31 +24,10 @@
  */
 
 #include <linux/fs.h>
-#include <linux/buffer_head.h>	/* for sync_mapping_buffers() */
 
 #include "ufs_fs.h"
 #include "ufs.h"
 
-
-int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
-{
-	struct inode *inode = dentry->d_inode;
-	int err;
-	int ret;
-
-	ret = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY))
-		return ret;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return ret;
-
-	err = ufs_sync_inode(inode);
-	if (ret == 0)
-		ret = err;
-	return ret;
-}
-
-
 /*
  * We have mostly NULL's here: the current defaults are ok for
  * the ufs filesystem.
@@ -62,6 +41,6 @@ const struct file_operations ufs_file_operations = {
 	.aio_write	= generic_file_aio_write,
 	.mmap		= generic_file_mmap,
 	.open           = generic_file_open,
-	.fsync		= ufs_sync_file,
+	.fsync		= simple_fsync,
 	.splice_read	= generic_file_splice_read,
 };
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 60359291761..5faed7954d0 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -263,6 +263,7 @@ void ufs_panic (struct super_block * sb, const char * function,
 	struct ufs_super_block_first * usb1;
 	va_list args;
 	
+	lock_kernel();
 	uspi = UFS_SB(sb)->s_uspi;
 	usb1 = ubh_get_usb_first(uspi);
 	
@@ -594,6 +595,9 @@ static void ufs_put_super_internal(struct super_block *sb)
 
 	
 	UFSD("ENTER\n");
+
+	lock_kernel();
+
 	ufs_put_cstotal(sb);
 	size = uspi->s_cssize;
 	blks = (size + uspi->s_fsize - 1) >> uspi->s_fshift;
@@ -621,6 +625,9 @@ static void ufs_put_super_internal(struct super_block *sb)
 		brelse (sbi->s_ucg[i]);
 	kfree (sbi->s_ucg);
 	kfree (base);
+
+	unlock_kernel();
+
 	UFSD("EXIT\n");
 }
 
@@ -1118,32 +1125,45 @@ failed_nomem:
 	return -ENOMEM;
 }
 
-static void ufs_write_super(struct super_block *sb)
+static int ufs_sync_fs(struct super_block *sb, int wait)
 {
 	struct ufs_sb_private_info * uspi;
 	struct ufs_super_block_first * usb1;
 	struct ufs_super_block_third * usb3;
 	unsigned flags;
 
+	lock_super(sb);
 	lock_kernel();
+
 	UFSD("ENTER\n");
+
 	flags = UFS_SB(sb)->s_flags;
 	uspi = UFS_SB(sb)->s_uspi;
 	usb1 = ubh_get_usb_first(uspi);
 	usb3 = ubh_get_usb_third(uspi);
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		usb1->fs_time = cpu_to_fs32(sb, get_seconds());
-		if ((flags & UFS_ST_MASK) == UFS_ST_SUN 
-		  || (flags & UFS_ST_MASK) == UFS_ST_SUNOS
-		  || (flags & UFS_ST_MASK) == UFS_ST_SUNx86)
-			ufs_set_fs_state(sb, usb1, usb3,
-					UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
-		ufs_put_cstotal(sb);
-	}
+	usb1->fs_time = cpu_to_fs32(sb, get_seconds());
+	if ((flags & UFS_ST_MASK) == UFS_ST_SUN  ||
+	    (flags & UFS_ST_MASK) == UFS_ST_SUNOS ||
+	    (flags & UFS_ST_MASK) == UFS_ST_SUNx86)
+		ufs_set_fs_state(sb, usb1, usb3,
+				UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time));
+	ufs_put_cstotal(sb);
 	sb->s_dirt = 0;
+
 	UFSD("EXIT\n");
 	unlock_kernel();
+	unlock_super(sb);
+
+	return 0;
+}
+
+static void ufs_write_super(struct super_block *sb)
+{
+	if (!(sb->s_flags & MS_RDONLY))
+		ufs_sync_fs(sb, 1);
+	else
+		sb->s_dirt = 0;
 }
 
 static void ufs_put_super(struct super_block *sb)
@@ -1152,6 +1172,9 @@ static void ufs_put_super(struct super_block *sb)
 		
 	UFSD("ENTER\n");
 
+	if (sb->s_dirt)
+		ufs_write_super(sb);
+
 	if (!(sb->s_flags & MS_RDONLY))
 		ufs_put_super_internal(sb);
 	
@@ -1171,7 +1194,9 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 	struct ufs_super_block_third * usb3;
 	unsigned new_mount_opt, ufstype;
 	unsigned flags;
-	
+
+	lock_kernel();
+	lock_super(sb);
 	uspi = UFS_SB(sb)->s_uspi;
 	flags = UFS_SB(sb)->s_flags;
 	usb1 = ubh_get_usb_first(uspi);
@@ -1184,17 +1209,24 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 	ufstype = UFS_SB(sb)->s_mount_opt & UFS_MOUNT_UFSTYPE;
 	new_mount_opt = 0;
 	ufs_set_opt (new_mount_opt, ONERROR_LOCK);
-	if (!ufs_parse_options (data, &new_mount_opt))
+	if (!ufs_parse_options (data, &new_mount_opt)) {
+		unlock_super(sb);
+		unlock_kernel();
 		return -EINVAL;
+	}
 	if (!(new_mount_opt & UFS_MOUNT_UFSTYPE)) {
 		new_mount_opt |= ufstype;
 	} else if ((new_mount_opt & UFS_MOUNT_UFSTYPE) != ufstype) {
 		printk("ufstype can't be changed during remount\n");
+		unlock_super(sb);
+		unlock_kernel();
 		return -EINVAL;
 	}
 
 	if ((*mount_flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
 		UFS_SB(sb)->s_mount_opt = new_mount_opt;
+		unlock_super(sb);
+		unlock_kernel();
 		return 0;
 	}
 	
@@ -1219,6 +1251,8 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 #ifndef CONFIG_UFS_FS_WRITE
 		printk("ufs was compiled with read-only support, "
 		"can't be mounted as read-write\n");
+		unlock_super(sb);
+		unlock_kernel();
 		return -EINVAL;
 #else
 		if (ufstype != UFS_MOUNT_UFSTYPE_SUN && 
@@ -1227,16 +1261,22 @@ static int ufs_remount (struct super_block *sb, int *mount_flags, char *data)
 		    ufstype != UFS_MOUNT_UFSTYPE_SUNx86 &&
 		    ufstype != UFS_MOUNT_UFSTYPE_UFS2) {
 			printk("this ufstype is read-only supported\n");
+			unlock_super(sb);
+			unlock_kernel();
 			return -EINVAL;
 		}
 		if (!ufs_read_cylinder_structures(sb)) {
 			printk("failed during remounting\n");
+			unlock_super(sb);
+			unlock_kernel();
 			return -EPERM;
 		}
 		sb->s_flags &= ~MS_RDONLY;
 #endif
 	}
 	UFS_SB(sb)->s_mount_opt = new_mount_opt;
+	unlock_super(sb);
+	unlock_kernel();
 	return 0;
 }
 
@@ -1352,6 +1392,7 @@ static const struct super_operations ufs_super_ops = {
 	.delete_inode	= ufs_delete_inode,
 	.put_super	= ufs_put_super,
 	.write_super	= ufs_write_super,
+	.sync_fs	= ufs_sync_fs,
 	.statfs		= ufs_statfs,
 	.remount_fs	= ufs_remount,
 	.show_options   = ufs_show_options,
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index d0c4acd4f1f..644e77e1359 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -99,7 +99,6 @@ extern void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de,
 extern const struct inode_operations ufs_file_inode_operations;
 extern const struct file_operations ufs_file_operations;
 extern const struct address_space_operations ufs_aops;
-extern int ufs_sync_file(struct file *, struct dentry *, int);
 
 /* ialloc.c */
 extern void ufs_free_inode (struct inode *inode);
diff --git a/fs/xattr.c b/fs/xattr.c
index d51b8f9db92..1c3d0af59dd 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -297,7 +297,7 @@ SYSCALL_DEFINE5(fsetxattr, int, fd, const char __user *, name,
 		return error;
 	dentry = f->f_path.dentry;
 	audit_inode(NULL, dentry);
-	error = mnt_want_write(f->f_path.mnt);
+	error = mnt_want_write_file(f);
 	if (!error) {
 		error = setxattr(dentry, name, value, size, flags);
 		mnt_drop_write(f->f_path.mnt);
@@ -524,7 +524,7 @@ SYSCALL_DEFINE2(fremovexattr, int, fd, const char __user *, name)
 		return error;
 	dentry = f->f_path.dentry;
 	audit_inode(NULL, dentry);
-	error = mnt_want_write(f->f_path.mnt);
+	error = mnt_want_write_file(f);
 	if (!error) {
 		error = removexattr(dentry, name);
 		mnt_drop_write(f->f_path.mnt);
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 29228f5899c..480f28127f0 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -39,6 +39,7 @@ config XFS_QUOTA
 config XFS_POSIX_ACL
 	bool "XFS POSIX ACL support"
 	depends on XFS_FS
+	select FS_POSIX_ACL
 	help
 	  POSIX Access Control Lists (ACLs) support permissions for users and
 	  groups beyond the owner/group/world scheme.
diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index 60f107e47fe..7a59daed178 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -40,7 +40,7 @@ xfs-$(CONFIG_PROC_FS)		+= quota/xfs_qm_stats.o
 endif
 
 xfs-$(CONFIG_XFS_RT)		+= xfs_rtalloc.o
-xfs-$(CONFIG_XFS_POSIX_ACL)	+= xfs_acl.o
+xfs-$(CONFIG_XFS_POSIX_ACL)	+= $(XFS_LINUX)/xfs_acl.o
 xfs-$(CONFIG_PROC_FS)		+= $(XFS_LINUX)/xfs_stats.o
 xfs-$(CONFIG_SYSCTL)		+= $(XFS_LINUX)/xfs_sysctl.o
 xfs-$(CONFIG_COMPAT)		+= $(XFS_LINUX)/xfs_ioctl32.o
@@ -88,8 +88,7 @@ xfs-y				+= xfs_alloc.o \
 				   xfs_utils.o \
 				   xfs_vnodeops.o \
 				   xfs_rw.o \
-				   xfs_dmops.o \
-				   xfs_qmops.o
+				   xfs_dmops.o
 
 xfs-$(CONFIG_XFS_TRACE)		+= xfs_btree_trace.o \
 				   xfs_dir2_trace.o
diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h
index af6843c7ee4..179cbd630f6 100644
--- a/fs/xfs/linux-2.6/kmem.h
+++ b/fs/xfs/linux-2.6/kmem.h
@@ -103,7 +103,7 @@ extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast);
 static inline int
 kmem_shake_allow(gfp_t gfp_mask)
 {
-	return (gfp_mask & __GFP_WAIT) != 0;
+	return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS));
 }
 
 #endif /* __XFS_SUPPORT_KMEM_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
new file mode 100644
index 00000000000..1e9d1246eeb
--- /dev/null
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -0,0 +1,523 @@
+/*
+ * Copyright (c) 2008, Christoph Hellwig
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include "xfs.h"
+#include "xfs_acl.h"
+#include "xfs_attr.h"
+#include "xfs_bmap_btree.h"
+#include "xfs_inode.h"
+#include "xfs_vnodeops.h"
+#include <linux/xattr.h>
+#include <linux/posix_acl_xattr.h>
+
+
+#define XFS_ACL_NOT_CACHED	((void *)-1)
+
+/*
+ * Locking scheme:
+ *  - all ACL updates are protected by inode->i_mutex, which is taken before
+ *    calling into this file.
+ *  - access and updates to the ip->i_acl and ip->i_default_acl pointers are
+ *    protected by inode->i_lock.
+ */
+
+STATIC struct posix_acl *
+xfs_acl_from_disk(struct xfs_acl *aclp)
+{
+	struct posix_acl_entry *acl_e;
+	struct posix_acl *acl;
+	struct xfs_acl_entry *ace;
+	int count, i;
+
+	count = be32_to_cpu(aclp->acl_cnt);
+
+	acl = posix_acl_alloc(count, GFP_KERNEL);
+	if (!acl)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < count; i++) {
+		acl_e = &acl->a_entries[i];
+		ace = &aclp->acl_entry[i];
+
+		/*
+		 * The tag is 32 bits on disk and 16 bits in core.
+		 *
+		 * Because every access to it goes through the core
+		 * format first this is not a problem.
+		 */
+		acl_e->e_tag = be32_to_cpu(ace->ae_tag);
+		acl_e->e_perm = be16_to_cpu(ace->ae_perm);
+
+		switch (acl_e->e_tag) {
+		case ACL_USER:
+		case ACL_GROUP:
+			acl_e->e_id = be32_to_cpu(ace->ae_id);
+			break;
+		case ACL_USER_OBJ:
+		case ACL_GROUP_OBJ:
+		case ACL_MASK:
+		case ACL_OTHER:
+			acl_e->e_id = ACL_UNDEFINED_ID;
+			break;
+		default:
+			goto fail;
+		}
+	}
+	return acl;
+
+fail:
+	posix_acl_release(acl);
+	return ERR_PTR(-EINVAL);
+}
+
+STATIC void
+xfs_acl_to_disk(struct xfs_acl *aclp, const struct posix_acl *acl)
+{
+	const struct posix_acl_entry *acl_e;
+	struct xfs_acl_entry *ace;
+	int i;
+
+	aclp->acl_cnt = cpu_to_be32(acl->a_count);
+	for (i = 0; i < acl->a_count; i++) {
+		ace = &aclp->acl_entry[i];
+		acl_e = &acl->a_entries[i];
+
+		ace->ae_tag = cpu_to_be32(acl_e->e_tag);
+		ace->ae_id = cpu_to_be32(acl_e->e_id);
+		ace->ae_perm = cpu_to_be16(acl_e->e_perm);
+	}
+}
+
+/*
+ * Update the cached ACL pointer in the inode.
+ *
+ * Because we don't hold any locks while reading/writing the attribute
+ * from/to disk another thread could have raced and updated the cached
+ * ACL value before us. In that case we release the previous cached value
+ * and update it with our new value.
+ */
+STATIC void
+xfs_update_cached_acl(struct inode *inode, struct posix_acl **p_acl,
+		struct posix_acl *acl)
+{
+	spin_lock(&inode->i_lock);
+	if (*p_acl && *p_acl != XFS_ACL_NOT_CACHED)
+		posix_acl_release(*p_acl);
+	*p_acl = posix_acl_dup(acl);
+	spin_unlock(&inode->i_lock);
+}
+
+struct posix_acl *
+xfs_get_acl(struct inode *inode, int type)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	struct posix_acl *acl = NULL, **p_acl;
+	struct xfs_acl *xfs_acl;
+	int len = sizeof(struct xfs_acl);
+	char *ea_name;
+	int error;
+
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		ea_name = SGI_ACL_FILE;
+		p_acl = &ip->i_acl;
+		break;
+	case ACL_TYPE_DEFAULT:
+		ea_name = SGI_ACL_DEFAULT;
+		p_acl = &ip->i_default_acl;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	spin_lock(&inode->i_lock);
+	if (*p_acl != XFS_ACL_NOT_CACHED)
+		acl = posix_acl_dup(*p_acl);
+	spin_unlock(&inode->i_lock);
+
+	/*
+	 * If we have a cached ACLs value just return it, not need to
+	 * go out to the disk.
+	 */
+	if (acl)
+		return acl;
+
+	xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+	if (!xfs_acl)
+		return ERR_PTR(-ENOMEM);
+
+	error = -xfs_attr_get(ip, ea_name, (char *)xfs_acl, &len, ATTR_ROOT);
+	if (error) {
+		/*
+		 * If the attribute doesn't exist make sure we have a negative
+		 * cache entry, for any other error assume it is transient and
+		 * leave the cache entry as XFS_ACL_NOT_CACHED.
+		 */
+		if (error == -ENOATTR) {
+			acl = NULL;
+			goto out_update_cache;
+		}
+		goto out;
+	}
+
+	acl = xfs_acl_from_disk(xfs_acl);
+	if (IS_ERR(acl))
+		goto out;
+
+ out_update_cache:
+	xfs_update_cached_acl(inode, p_acl, acl);
+ out:
+	kfree(xfs_acl);
+	return acl;
+}
+
+STATIC int
+xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	struct posix_acl **p_acl;
+	char *ea_name;
+	int error;
+
+	if (S_ISLNK(inode->i_mode))
+		return -EOPNOTSUPP;
+
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		ea_name = SGI_ACL_FILE;
+		p_acl = &ip->i_acl;
+		break;
+	case ACL_TYPE_DEFAULT:
+		if (!S_ISDIR(inode->i_mode))
+			return acl ? -EACCES : 0;
+		ea_name = SGI_ACL_DEFAULT;
+		p_acl = &ip->i_default_acl;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (acl) {
+		struct xfs_acl *xfs_acl;
+		int len;
+
+		xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+		if (!xfs_acl)
+			return -ENOMEM;
+
+		xfs_acl_to_disk(xfs_acl, acl);
+		len = sizeof(struct xfs_acl) -
+			(sizeof(struct xfs_acl_entry) *
+			 (XFS_ACL_MAX_ENTRIES - acl->a_count));
+
+		error = -xfs_attr_set(ip, ea_name, (char *)xfs_acl,
+				len, ATTR_ROOT);
+
+		kfree(xfs_acl);
+	} else {
+		/*
+		 * A NULL ACL argument means we want to remove the ACL.
+		 */
+		error = -xfs_attr_remove(ip, ea_name, ATTR_ROOT);
+
+		/*
+		 * If the attribute didn't exist to start with that's fine.
+		 */
+		if (error == -ENOATTR)
+			error = 0;
+	}
+
+	if (!error)
+		xfs_update_cached_acl(inode, p_acl, acl);
+	return error;
+}
+
+int
+xfs_check_acl(struct inode *inode, int mask)
+{
+	struct xfs_inode *ip = XFS_I(inode);
+	struct posix_acl *acl;
+	int error = -EAGAIN;
+
+	xfs_itrace_entry(ip);
+
+	/*
+	 * If there is no attribute fork no ACL exists on this inode and
+	 * we can skip the whole exercise.
+	 */
+	if (!XFS_IFORK_Q(ip))
+		return -EAGAIN;
+
+	acl = xfs_get_acl(inode, ACL_TYPE_ACCESS);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
+	if (acl) {
+		error = posix_acl_permission(inode, acl, mask);
+		posix_acl_release(acl);
+	}
+
+	return error;
+}
+
+static int
+xfs_set_mode(struct inode *inode, mode_t mode)
+{
+	int error = 0;
+
+	if (mode != inode->i_mode) {
+		struct iattr iattr;
+
+		iattr.ia_valid = ATTR_MODE;
+		iattr.ia_mode = mode;
+
+		error = -xfs_setattr(XFS_I(inode), &iattr, XFS_ATTR_NOACL);
+	}
+
+	return error;
+}
+
+static int
+xfs_acl_exists(struct inode *inode, char *name)
+{
+	int len = sizeof(struct xfs_acl);
+
+	return (xfs_attr_get(XFS_I(inode), name, NULL, &len,
+			    ATTR_ROOT|ATTR_KERNOVAL) == 0);
+}
+
+int
+posix_acl_access_exists(struct inode *inode)
+{
+	return xfs_acl_exists(inode, SGI_ACL_FILE);
+}
+
+int
+posix_acl_default_exists(struct inode *inode)
+{
+	if (!S_ISDIR(inode->i_mode))
+		return 0;
+	return xfs_acl_exists(inode, SGI_ACL_DEFAULT);
+}
+
+/*
+ * No need for i_mutex because the inode is not yet exposed to the VFS.
+ */
+int
+xfs_inherit_acl(struct inode *inode, struct posix_acl *default_acl)
+{
+	struct posix_acl *clone;
+	mode_t mode;
+	int error = 0, inherit = 0;
+
+	if (S_ISDIR(inode->i_mode)) {
+		error = xfs_set_acl(inode, ACL_TYPE_DEFAULT, default_acl);
+		if (error)
+			return error;
+	}
+
+	clone = posix_acl_clone(default_acl, GFP_KERNEL);
+	if (!clone)
+		return -ENOMEM;
+
+	mode = inode->i_mode;
+	error = posix_acl_create_masq(clone, &mode);
+	if (error < 0)
+		goto out_release_clone;
+
+	/*
+	 * If posix_acl_create_masq returns a positive value we need to
+	 * inherit a permission that can't be represented using the Unix
+	 * mode bits and we actually need to set an ACL.
+	 */
+	if (error > 0)
+		inherit = 1;
+
+	error = xfs_set_mode(inode, mode);
+	if (error)
+		goto out_release_clone;
+
+	if (inherit)
+		error = xfs_set_acl(inode, ACL_TYPE_ACCESS, clone);
+
+ out_release_clone:
+	posix_acl_release(clone);
+	return error;
+}
+
+int
+xfs_acl_chmod(struct inode *inode)
+{
+	struct posix_acl *acl, *clone;
+	int error;
+
+	if (S_ISLNK(inode->i_mode))
+		return -EOPNOTSUPP;
+
+	acl = xfs_get_acl(inode, ACL_TYPE_ACCESS);
+	if (IS_ERR(acl) || !acl)
+		return PTR_ERR(acl);
+
+	clone = posix_acl_clone(acl, GFP_KERNEL);
+	posix_acl_release(acl);
+	if (!clone)
+		return -ENOMEM;
+
+	error = posix_acl_chmod_masq(clone, inode->i_mode);
+	if (!error)
+		error = xfs_set_acl(inode, ACL_TYPE_ACCESS, clone);
+
+	posix_acl_release(clone);
+	return error;
+}
+
+void
+xfs_inode_init_acls(struct xfs_inode *ip)
+{
+	/*
+	 * No need for locking, inode is not live yet.
+	 */
+	ip->i_acl = XFS_ACL_NOT_CACHED;
+	ip->i_default_acl = XFS_ACL_NOT_CACHED;
+}
+
+void
+xfs_inode_clear_acls(struct xfs_inode *ip)
+{
+	/*
+	 * No need for locking here, the inode is not live anymore
+	 * and just about to be freed.
+	 */
+	if (ip->i_acl != XFS_ACL_NOT_CACHED)
+		posix_acl_release(ip->i_acl);
+	if (ip->i_default_acl != XFS_ACL_NOT_CACHED)
+		posix_acl_release(ip->i_default_acl);
+}
+
+
+/*
+ * System xattr handlers.
+ *
+ * Currently Posix ACLs are the only system namespace extended attribute
+ * handlers supported by XFS, so we just implement the handlers here.
+ * If we ever support other system extended attributes this will need
+ * some refactoring.
+ */
+
+static int
+xfs_decode_acl(const char *name)
+{
+	if (strcmp(name, "posix_acl_access") == 0)
+		return ACL_TYPE_ACCESS;
+	else if (strcmp(name, "posix_acl_default") == 0)
+		return ACL_TYPE_DEFAULT;
+	return -EINVAL;
+}
+
+static int
+xfs_xattr_system_get(struct inode *inode, const char *name,
+		void *value, size_t size)
+{
+	struct posix_acl *acl;
+	int type, error;
+
+	type = xfs_decode_acl(name);
+	if (type < 0)
+		return type;
+
+	acl = xfs_get_acl(inode, type);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
+	if (acl == NULL)
+		return -ENODATA;
+
+	error = posix_acl_to_xattr(acl, value, size);
+	posix_acl_release(acl);
+
+	return error;
+}
+
+static int
+xfs_xattr_system_set(struct inode *inode, const char *name,
+		const void *value, size_t size, int flags)
+{
+	struct posix_acl *acl = NULL;
+	int error = 0, type;
+
+	type = xfs_decode_acl(name);
+	if (type < 0)
+		return type;
+	if (flags & XATTR_CREATE)
+		return -EINVAL;
+	if (type == ACL_TYPE_DEFAULT && !S_ISDIR(inode->i_mode))
+		return value ? -EACCES : 0;
+	if ((current_fsuid() != inode->i_uid) && !capable(CAP_FOWNER))
+		return -EPERM;
+
+	if (!value)
+		goto set_acl;
+
+	acl = posix_acl_from_xattr(value, size);
+	if (!acl) {
+		/*
+		 * acl_set_file(3) may request that we set default ACLs with
+		 * zero length -- defend (gracefully) against that here.
+		 */
+		goto out;
+	}
+	if (IS_ERR(acl)) {
+		error = PTR_ERR(acl);
+		goto out;
+	}
+
+	error = posix_acl_valid(acl);
+	if (error)
+		goto out_release;
+
+	error = -EINVAL;
+	if (acl->a_count > XFS_ACL_MAX_ENTRIES)
+		goto out_release;
+
+	if (type == ACL_TYPE_ACCESS) {
+		mode_t mode = inode->i_mode;
+		error = posix_acl_equiv_mode(acl, &mode);
+
+		if (error <= 0) {
+			posix_acl_release(acl);
+			acl = NULL;
+
+			if (error < 0)
+				return error;
+		}
+
+		error = xfs_set_mode(inode, mode);
+		if (error)
+			goto out_release;
+	}
+
+ set_acl:
+	error = xfs_set_acl(inode, type, acl);
+ out_release:
+	posix_acl_release(acl);
+ out:
+	return error;
+}
+
+struct xattr_handler xfs_xattr_system_handler = {
+	.prefix	= XATTR_SYSTEM_PREFIX,
+	.get	= xfs_xattr_system_get,
+	.set	= xfs_xattr_system_set,
+};
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index e28800a9f2b..1418b916fc2 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -1501,7 +1501,7 @@ xfs_setsize_buftarg_early(
 	struct block_device	*bdev)
 {
 	return xfs_setsize_buftarg_flags(btp,
-			PAGE_CACHE_SIZE, bdev_hardsect_size(bdev), 0);
+			PAGE_CACHE_SIZE, bdev_logical_block_size(bdev), 0);
 }
 
 int
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 34eaab608e6..5bb523d7f37 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -41,7 +41,6 @@
 #include "xfs_itable.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_bmap.h"
 #include "xfs_buf_item.h"
@@ -899,7 +898,8 @@ xfs_ioctl_setattr(
 	struct xfs_mount	*mp = ip->i_mount;
 	struct xfs_trans	*tp;
 	unsigned int		lock_flags = 0;
-	struct xfs_dquot	*udqp = NULL, *gdqp = NULL;
+	struct xfs_dquot	*udqp = NULL;
+	struct xfs_dquot	*gdqp = NULL;
 	struct xfs_dquot	*olddquot = NULL;
 	int			code;
 
@@ -919,7 +919,7 @@ xfs_ioctl_setattr(
 	 * because the i_*dquot fields will get updated anyway.
 	 */
 	if (XFS_IS_QUOTA_ON(mp) && (mask & FSX_PROJID)) {
-		code = XFS_QM_DQVOPALLOC(mp, ip, ip->i_d.di_uid,
+		code = xfs_qm_vop_dqalloc(ip, ip->i_d.di_uid,
 					 ip->i_d.di_gid, fa->fsx_projid,
 					 XFS_QMOPT_PQUOTA, &udqp, &gdqp);
 		if (code)
@@ -954,10 +954,11 @@ xfs_ioctl_setattr(
 	 * Do a quota reservation only if projid is actually going to change.
 	 */
 	if (mask & FSX_PROJID) {
-		if (XFS_IS_PQUOTA_ON(mp) &&
+		if (XFS_IS_QUOTA_RUNNING(mp) &&
+		    XFS_IS_PQUOTA_ON(mp) &&
 		    ip->i_d.di_projid != fa->fsx_projid) {
 			ASSERT(tp);
-			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
+			code = xfs_qm_vop_chown_reserve(tp, ip, udqp, gdqp,
 						capable(CAP_FOWNER) ?
 						XFS_QMOPT_FORCE_RES : 0);
 			if (code)	/* out of quota */
@@ -1059,8 +1060,8 @@ xfs_ioctl_setattr(
 		 * in the transaction.
 		 */
 		if (ip->i_d.di_projid != fa->fsx_projid) {
-			if (XFS_IS_PQUOTA_ON(mp)) {
-				olddquot = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+			if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_PQUOTA_ON(mp)) {
+				olddquot = xfs_qm_vop_chown(tp, ip,
 							&ip->i_gdquot, gdqp);
 			}
 			ip->i_d.di_projid = fa->fsx_projid;
@@ -1106,9 +1107,9 @@ xfs_ioctl_setattr(
 	/*
 	 * Release any dquot(s) the inode had kept before chown.
 	 */
-	XFS_QM_DQRELE(mp, olddquot);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(olddquot);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	if (code)
 		return code;
@@ -1122,8 +1123,8 @@ xfs_ioctl_setattr(
 	return 0;
 
  error_return:
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 	xfs_trans_cancel(tp, 0);
 	if (lock_flags)
 		xfs_iunlock(ip, lock_flags);
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 6075382336d..58973bb4603 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -17,6 +17,7 @@
  */
 #include "xfs.h"
 #include "xfs_fs.h"
+#include "xfs_acl.h"
 #include "xfs_bit.h"
 #include "xfs_log.h"
 #include "xfs_inum.h"
@@ -51,6 +52,7 @@
 #include <linux/capability.h>
 #include <linux/xattr.h>
 #include <linux/namei.h>
+#include <linux/posix_acl.h>
 #include <linux/security.h>
 #include <linux/falloc.h>
 #include <linux/fiemap.h>
@@ -202,9 +204,8 @@ xfs_vn_mknod(
 {
 	struct inode	*inode;
 	struct xfs_inode *ip = NULL;
-	xfs_acl_t	*default_acl = NULL;
+	struct posix_acl *default_acl = NULL;
 	struct xfs_name	name;
-	int (*test_default_acl)(struct inode *) = _ACL_DEFAULT_EXISTS;
 	int		error;
 
 	/*
@@ -219,18 +220,14 @@ xfs_vn_mknod(
 		rdev = 0;
 	}
 
-	if (test_default_acl && test_default_acl(dir)) {
-		if (!_ACL_ALLOC(default_acl)) {
-			return -ENOMEM;
-		}
-		if (!_ACL_GET_DEFAULT(dir, default_acl)) {
-			_ACL_FREE(default_acl);
-			default_acl = NULL;
-		}
-	}
+	if (IS_POSIXACL(dir)) {
+		default_acl = xfs_get_acl(dir, ACL_TYPE_DEFAULT);
+		if (IS_ERR(default_acl))
+			return -PTR_ERR(default_acl);
 
-	if (IS_POSIXACL(dir) && !default_acl)
-		mode &= ~current_umask();
+		if (!default_acl)
+			mode &= ~current_umask();
+	}
 
 	xfs_dentry_to_name(&name, dentry);
 	error = xfs_create(XFS_I(dir), &name, mode, rdev, &ip, NULL);
@@ -244,10 +241,10 @@ xfs_vn_mknod(
 		goto out_cleanup_inode;
 
 	if (default_acl) {
-		error = _ACL_INHERIT(inode, mode, default_acl);
+		error = -xfs_inherit_acl(inode, default_acl);
 		if (unlikely(error))
 			goto out_cleanup_inode;
-		_ACL_FREE(default_acl);
+		posix_acl_release(default_acl);
 	}
 
 
@@ -257,8 +254,7 @@ xfs_vn_mknod(
  out_cleanup_inode:
 	xfs_cleanup_inode(dir, inode, dentry);
  out_free_acl:
-	if (default_acl)
-		_ACL_FREE(default_acl);
+	posix_acl_release(default_acl);
 	return -error;
 }
 
@@ -488,26 +484,6 @@ xfs_vn_put_link(
 		kfree(s);
 }
 
-#ifdef CONFIG_XFS_POSIX_ACL
-STATIC int
-xfs_check_acl(
-	struct inode		*inode,
-	int			mask)
-{
-	struct xfs_inode	*ip = XFS_I(inode);
-	int			error;
-
-	xfs_itrace_entry(ip);
-
-	if (XFS_IFORK_Q(ip)) {
-		error = xfs_acl_iaccess(ip, mask, NULL);
-		if (error != -1)
-			return -error;
-	}
-
-	return -EAGAIN;
-}
-
 STATIC int
 xfs_vn_permission(
 	struct inode		*inode,
@@ -515,9 +491,6 @@ xfs_vn_permission(
 {
 	return generic_permission(inode, mask, xfs_check_acl);
 }
-#else
-#define xfs_vn_permission NULL
-#endif
 
 STATIC int
 xfs_vn_getattr(
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 9142192ccbe..7078974a6ee 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_inode_item.h"
 #include "xfs_buf_item.h"
diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c
index 94d9a633d3d..cb6e2cca214 100644
--- a/fs/xfs/linux-2.6/xfs_quotaops.c
+++ b/fs/xfs/linux-2.6/xfs_quotaops.c
@@ -50,9 +50,11 @@ xfs_fs_quota_sync(
 {
 	struct xfs_mount	*mp = XFS_M(sb);
 
+	if (sb->s_flags & MS_RDONLY)
+		return -EROFS;
 	if (!XFS_IS_QUOTA_RUNNING(mp))
 		return -ENOSYS;
-	return -xfs_sync_inodes(mp, SYNC_DELWRI);
+	return -xfs_sync_data(mp, 0);
 }
 
 STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index bb685269f83..2e09efbca8d 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -43,7 +43,6 @@
 #include "xfs_itable.h"
 #include "xfs_fsops.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -405,6 +404,14 @@ xfs_parseargs(
 		return EINVAL;
 	}
 
+#ifndef CONFIG_XFS_QUOTA
+	if (XFS_IS_QUOTA_RUNNING(mp)) {
+		cmn_err(CE_WARN,
+			"XFS: quota support not available in this kernel.");
+		return EINVAL;
+	}
+#endif
+
 	if ((mp->m_qflags & (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE)) &&
 	    (mp->m_qflags & (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE))) {
 		cmn_err(CE_WARN,
@@ -1063,7 +1070,18 @@ xfs_fs_put_super(
 	int			unmount_event_flags = 0;
 
 	xfs_syncd_stop(mp);
-	xfs_sync_inodes(mp, SYNC_ATTR|SYNC_DELWRI);
+
+	if (!(sb->s_flags & MS_RDONLY)) {
+		/*
+		 * XXX(hch): this should be SYNC_WAIT.
+		 *
+		 * Or more likely not needed at all because the VFS is already
+		 * calling ->sync_fs after shutting down all filestem
+		 * operations and just before calling ->put_super.
+		 */
+		xfs_sync_data(mp, 0);
+		xfs_sync_attr(mp, 0);
+	}
 
 #ifdef HAVE_DMAPI
 	if (mp->m_flags & XFS_MOUNT_DMAPI) {
@@ -1098,21 +1116,11 @@ xfs_fs_put_super(
 	xfs_freesb(mp);
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
-	xfs_qmops_put(mp);
 	xfs_dmops_put(mp);
 	xfs_free_fsname(mp);
 	kfree(mp);
 }
 
-STATIC void
-xfs_fs_write_super(
-	struct super_block	*sb)
-{
-	if (!(sb->s_flags & MS_RDONLY))
-		xfs_sync_fsdata(XFS_M(sb), 0);
-	sb->s_dirt = 0;
-}
-
 STATIC int
 xfs_fs_sync_super(
 	struct super_block	*sb,
@@ -1137,7 +1145,6 @@ xfs_fs_sync_super(
 		error = xfs_quiesce_data(mp);
 	else
 		error = xfs_sync_fsdata(mp, 0);
-	sb->s_dirt = 0;
 
 	if (unlikely(laptop_mode)) {
 		int	prev_sync_seq = mp->m_sync_seq;
@@ -1168,6 +1175,7 @@ xfs_fs_statfs(
 {
 	struct xfs_mount	*mp = XFS_M(dentry->d_sb);
 	xfs_sb_t		*sbp = &mp->m_sb;
+	struct xfs_inode	*ip = XFS_I(dentry->d_inode);
 	__uint64_t		fakeinos, id;
 	xfs_extlen_t		lsize;
 
@@ -1196,7 +1204,10 @@ xfs_fs_statfs(
 	statp->f_ffree = statp->f_files - (sbp->sb_icount - sbp->sb_ifree);
 	spin_unlock(&mp->m_sb_lock);
 
-	XFS_QM_DQSTATVFS(XFS_I(dentry->d_inode), statp);
+	if ((ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) ||
+	    ((mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))) ==
+			      (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
+		xfs_qm_statvfs(ip, statp);
 	return 0;
 }
 
@@ -1404,16 +1415,13 @@ xfs_fs_fill_super(
 	error = xfs_dmops_get(mp);
 	if (error)
 		goto out_free_fsname;
-	error = xfs_qmops_get(mp);
-	if (error)
-		goto out_put_dmops;
 
 	if (silent)
 		flags |= XFS_MFSI_QUIET;
 
 	error = xfs_open_devices(mp);
 	if (error)
-		goto out_put_qmops;
+		goto out_put_dmops;
 
 	if (xfs_icsb_init_counters(mp))
 		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
@@ -1443,7 +1451,6 @@ xfs_fs_fill_super(
 
 	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, mtpt, mp->m_fsname);
 
-	sb->s_dirt = 1;
 	sb->s_magic = XFS_SB_MAGIC;
 	sb->s_blocksize = mp->m_sb.sb_blocksize;
 	sb->s_blocksize_bits = ffs(sb->s_blocksize) - 1;
@@ -1482,8 +1489,6 @@ xfs_fs_fill_super(
  out_destroy_counters:
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
- out_put_qmops:
-	xfs_qmops_put(mp);
  out_put_dmops:
 	xfs_dmops_put(mp);
  out_free_fsname:
@@ -1533,7 +1538,6 @@ static struct super_operations xfs_super_operations = {
 	.write_inode		= xfs_fs_write_inode,
 	.clear_inode		= xfs_fs_clear_inode,
 	.put_super		= xfs_fs_put_super,
-	.write_super		= xfs_fs_write_super,
 	.sync_fs		= xfs_fs_sync_super,
 	.freeze_fs		= xfs_fs_freeze,
 	.statfs			= xfs_fs_statfs,
@@ -1718,18 +1722,8 @@ xfs_init_zones(void)
 	if (!xfs_ili_zone)
 		goto out_destroy_inode_zone;
 
-#ifdef CONFIG_XFS_POSIX_ACL
-	xfs_acl_zone = kmem_zone_init(sizeof(xfs_acl_t), "xfs_acl");
-	if (!xfs_acl_zone)
-		goto out_destroy_ili_zone;
-#endif
-
 	return 0;
 
-#ifdef CONFIG_XFS_POSIX_ACL
- out_destroy_ili_zone:
-#endif
-	kmem_zone_destroy(xfs_ili_zone);
  out_destroy_inode_zone:
 	kmem_zone_destroy(xfs_inode_zone);
  out_destroy_efi_zone:
@@ -1763,9 +1757,6 @@ xfs_init_zones(void)
 STATIC void
 xfs_destroy_zones(void)
 {
-#ifdef CONFIG_XFS_POSIX_ACL
-	kmem_zone_destroy(xfs_acl_zone);
-#endif
 	kmem_zone_destroy(xfs_ili_zone);
 	kmem_zone_destroy(xfs_inode_zone);
 	kmem_zone_destroy(xfs_efi_zone);
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index f7ba76633c2..b619d6b8ca4 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -43,166 +43,267 @@
 #include "xfs_buf_item.h"
 #include "xfs_inode_item.h"
 #include "xfs_rw.h"
+#include "xfs_quota.h"
 
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-/*
- * Sync all the inodes in the given AG according to the
- * direction given by the flags.
- */
-STATIC int
-xfs_sync_inodes_ag(
-	xfs_mount_t	*mp,
-	int		ag,
-	int		flags)
-{
-	xfs_perag_t	*pag = &mp->m_perag[ag];
-	int		nr_found;
-	uint32_t	first_index = 0;
-	int		error = 0;
-	int		last_error = 0;
 
-	do {
-		struct inode	*inode;
-		xfs_inode_t	*ip = NULL;
-		int		lock_flags = XFS_ILOCK_SHARED;
+STATIC xfs_inode_t *
+xfs_inode_ag_lookup(
+	struct xfs_mount	*mp,
+	struct xfs_perag	*pag,
+	uint32_t		*first_index,
+	int			tag)
+{
+	int			nr_found;
+	struct xfs_inode	*ip;
 
-		/*
-		 * use a gang lookup to find the next inode in the tree
-		 * as the tree is sparse and a gang lookup walks to find
-		 * the number of objects requested.
-		 */
-		read_lock(&pag->pag_ici_lock);
+	/*
+	 * use a gang lookup to find the next inode in the tree
+	 * as the tree is sparse and a gang lookup walks to find
+	 * the number of objects requested.
+	 */
+	read_lock(&pag->pag_ici_lock);
+	if (tag == XFS_ICI_NO_TAG) {
 		nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
-				(void**)&ip, first_index, 1);
+				(void **)&ip, *first_index, 1);
+	} else {
+		nr_found = radix_tree_gang_lookup_tag(&pag->pag_ici_root,
+				(void **)&ip, *first_index, 1, tag);
+	}
+	if (!nr_found)
+		goto unlock;
 
-		if (!nr_found) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
+	/*
+	 * Update the index for the next lookup. Catch overflows
+	 * into the next AG range which can occur if we have inodes
+	 * in the last block of the AG and we are currently
+	 * pointing to the last inode.
+	 */
+	*first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
+	if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
+		goto unlock;
 
-		/*
-		 * Update the index for the next lookup. Catch overflows
-		 * into the next AG range which can occur if we have inodes
-		 * in the last block of the AG and we are currently
-		 * pointing to the last inode.
-		 */
-		first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
-		if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
+	return ip;
 
-		/* nothing to sync during shutdown */
-		if (XFS_FORCED_SHUTDOWN(mp)) {
-			read_unlock(&pag->pag_ici_lock);
-			return 0;
-		}
+unlock:
+	read_unlock(&pag->pag_ici_lock);
+	return NULL;
+}
 
-		/*
-		 * If we can't get a reference on the inode, it must be
-		 * in reclaim. Leave it for the reclaim code to flush.
-		 */
-		inode = VFS_I(ip);
-		if (!igrab(inode)) {
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
-		read_unlock(&pag->pag_ici_lock);
+STATIC int
+xfs_inode_ag_walk(
+	struct xfs_mount	*mp,
+	xfs_agnumber_t		ag,
+	int			(*execute)(struct xfs_inode *ip,
+					   struct xfs_perag *pag, int flags),
+	int			flags,
+	int			tag)
+{
+	struct xfs_perag	*pag = &mp->m_perag[ag];
+	uint32_t		first_index;
+	int			last_error = 0;
+	int			skipped;
 
-		/* avoid new or bad inodes */
-		if (is_bad_inode(inode) ||
-		    xfs_iflags_test(ip, XFS_INEW)) {
-			IRELE(ip);
-			continue;
-		}
+restart:
+	skipped = 0;
+	first_index = 0;
+	do {
+		int		error = 0;
+		xfs_inode_t	*ip;
 
-		/*
-		 * If we have to flush data or wait for I/O completion
-		 * we need to hold the iolock.
-		 */
-		if (flags & SYNC_DELWRI) {
-			if (VN_DIRTY(inode)) {
-				if (flags & SYNC_TRYLOCK) {
-					if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
-						lock_flags |= XFS_IOLOCK_SHARED;
-				} else {
-					xfs_ilock(ip, XFS_IOLOCK_SHARED);
-					lock_flags |= XFS_IOLOCK_SHARED;
-				}
-				if (lock_flags & XFS_IOLOCK_SHARED) {
-					error = xfs_flush_pages(ip, 0, -1,
-							(flags & SYNC_WAIT) ? 0
-								: XFS_B_ASYNC,
-							FI_NONE);
-				}
-			}
-			if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
-				xfs_ioend_wait(ip);
-		}
-		xfs_ilock(ip, XFS_ILOCK_SHARED);
-
-		if ((flags & SYNC_ATTR) && !xfs_inode_clean(ip)) {
-			if (flags & SYNC_WAIT) {
-				xfs_iflock(ip);
-				if (!xfs_inode_clean(ip))
-					error = xfs_iflush(ip, XFS_IFLUSH_SYNC);
-				else
-					xfs_ifunlock(ip);
-			} else if (xfs_iflock_nowait(ip)) {
-				if (!xfs_inode_clean(ip))
-					error = xfs_iflush(ip, XFS_IFLUSH_DELWRI);
-				else
-					xfs_ifunlock(ip);
-			}
-		}
-		xfs_iput(ip, lock_flags);
+		ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag);
+		if (!ip)
+			break;
 
+		error = execute(ip, pag, flags);
+		if (error == EAGAIN) {
+			skipped++;
+			continue;
+		}
 		if (error)
 			last_error = error;
 		/*
 		 * bail out if the filesystem is corrupted.
 		 */
 		if (error == EFSCORRUPTED)
-			return XFS_ERROR(error);
+			break;
 
-	} while (nr_found);
+	} while (1);
+
+	if (skipped) {
+		delay(1);
+		goto restart;
+	}
 
+	xfs_put_perag(mp, pag);
 	return last_error;
 }
 
 int
-xfs_sync_inodes(
-	xfs_mount_t	*mp,
-	int		flags)
+xfs_inode_ag_iterator(
+	struct xfs_mount	*mp,
+	int			(*execute)(struct xfs_inode *ip,
+					   struct xfs_perag *pag, int flags),
+	int			flags,
+	int			tag)
 {
-	int		error;
-	int		last_error;
-	int		i;
-	int		lflags = XFS_LOG_FORCE;
+	int			error = 0;
+	int			last_error = 0;
+	xfs_agnumber_t		ag;
 
-	if (mp->m_flags & XFS_MOUNT_RDONLY)
-		return 0;
-	error = 0;
-	last_error = 0;
+	for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
+		if (!mp->m_perag[ag].pag_ici_init)
+			continue;
+		error = xfs_inode_ag_walk(mp, ag, execute, flags, tag);
+		if (error) {
+			last_error = error;
+			if (error == EFSCORRUPTED)
+				break;
+		}
+	}
+	return XFS_ERROR(last_error);
+}
+
+/* must be called with pag_ici_lock held and releases it */
+int
+xfs_sync_inode_valid(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag)
+{
+	struct inode		*inode = VFS_I(ip);
+
+	/* nothing to sync during shutdown */
+	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+		read_unlock(&pag->pag_ici_lock);
+		return EFSCORRUPTED;
+	}
+
+	/*
+	 * If we can't get a reference on the inode, it must be in reclaim.
+	 * Leave it for the reclaim code to flush. Also avoid inodes that
+	 * haven't been fully initialised.
+	 */
+	if (!igrab(inode)) {
+		read_unlock(&pag->pag_ici_lock);
+		return ENOENT;
+	}
+	read_unlock(&pag->pag_ici_lock);
+
+	if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) {
+		IRELE(ip);
+		return ENOENT;
+	}
+
+	return 0;
+}
+
+STATIC int
+xfs_sync_inode_data(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
+{
+	struct inode		*inode = VFS_I(ip);
+	struct address_space *mapping = inode->i_mapping;
+	int			error = 0;
+
+	error = xfs_sync_inode_valid(ip, pag);
+	if (error)
+		return error;
+
+	if (!mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
+		goto out_wait;
+
+	if (!xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED)) {
+		if (flags & SYNC_TRYLOCK)
+			goto out_wait;
+		xfs_ilock(ip, XFS_IOLOCK_SHARED);
+	}
+
+	error = xfs_flush_pages(ip, 0, -1, (flags & SYNC_WAIT) ?
+				0 : XFS_B_ASYNC, FI_NONE);
+	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
 
+ out_wait:
 	if (flags & SYNC_WAIT)
-		lflags |= XFS_LOG_SYNC;
+		xfs_ioend_wait(ip);
+	IRELE(ip);
+	return error;
+}
 
-	for (i = 0; i < mp->m_sb.sb_agcount; i++) {
-		if (!mp->m_perag[i].pag_ici_init)
-			continue;
-		error = xfs_sync_inodes_ag(mp, i, flags);
-		if (error)
-			last_error = error;
-		if (error == EFSCORRUPTED)
-			break;
+STATIC int
+xfs_sync_inode_attr(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
+{
+	int			error = 0;
+
+	error = xfs_sync_inode_valid(ip, pag);
+	if (error)
+		return error;
+
+	xfs_ilock(ip, XFS_ILOCK_SHARED);
+	if (xfs_inode_clean(ip))
+		goto out_unlock;
+	if (!xfs_iflock_nowait(ip)) {
+		if (!(flags & SYNC_WAIT))
+			goto out_unlock;
+		xfs_iflock(ip);
 	}
-	if (flags & SYNC_DELWRI)
-		xfs_log_force(mp, 0, lflags);
 
-	return XFS_ERROR(last_error);
+	if (xfs_inode_clean(ip)) {
+		xfs_ifunlock(ip);
+		goto out_unlock;
+	}
+
+	error = xfs_iflush(ip, (flags & SYNC_WAIT) ?
+			   XFS_IFLUSH_SYNC : XFS_IFLUSH_DELWRI);
+
+ out_unlock:
+	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+	IRELE(ip);
+	return error;
+}
+
+/*
+ * Write out pagecache data for the whole filesystem.
+ */
+int
+xfs_sync_data(
+	struct xfs_mount	*mp,
+	int			flags)
+{
+	int			error;
+
+	ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
+
+	error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
+				      XFS_ICI_NO_TAG);
+	if (error)
+		return XFS_ERROR(error);
+
+	xfs_log_force(mp, 0,
+		      (flags & SYNC_WAIT) ?
+		       XFS_LOG_FORCE | XFS_LOG_SYNC :
+		       XFS_LOG_FORCE);
+	return 0;
+}
+
+/*
+ * Write out inode metadata (attributes) for the whole filesystem.
+ */
+int
+xfs_sync_attr(
+	struct xfs_mount	*mp,
+	int			flags)
+{
+	ASSERT((flags & ~SYNC_WAIT) == 0);
+
+	return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
+				     XFS_ICI_NO_TAG);
 }
 
 STATIC int
@@ -252,7 +353,7 @@ xfs_sync_fsdata(
 	 * If this is xfssyncd() then only sync the superblock if we can
 	 * lock it without sleeping and it is not pinned.
 	 */
-	if (flags & SYNC_BDFLUSH) {
+	if (flags & SYNC_TRYLOCK) {
 		ASSERT(!(flags & SYNC_WAIT));
 
 		bp = xfs_getsb(mp, XFS_BUF_TRYLOCK);
@@ -316,13 +417,13 @@ xfs_quiesce_data(
 	int error;
 
 	/* push non-blocking */
-	xfs_sync_inodes(mp, SYNC_DELWRI|SYNC_BDFLUSH);
-	XFS_QM_DQSYNC(mp, SYNC_BDFLUSH);
+	xfs_sync_data(mp, 0);
+	xfs_qm_sync(mp, SYNC_TRYLOCK);
 	xfs_filestream_flush(mp);
 
 	/* push and block */
-	xfs_sync_inodes(mp, SYNC_DELWRI|SYNC_WAIT|SYNC_IOWAIT);
-	XFS_QM_DQSYNC(mp, SYNC_WAIT);
+	xfs_sync_data(mp, SYNC_WAIT);
+	xfs_qm_sync(mp, SYNC_WAIT);
 
 	/* write superblock and hoover up shutdown errors */
 	error = xfs_sync_fsdata(mp, 0);
@@ -341,7 +442,7 @@ xfs_quiesce_fs(
 	int	count = 0, pincount;
 
 	xfs_flush_buftarg(mp->m_ddev_targp, 0);
-	xfs_reclaim_inodes(mp, 0, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
+	xfs_reclaim_inodes(mp, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
 
 	/*
 	 * This loop must run at least twice.  The first instance of the loop
@@ -350,7 +451,7 @@ xfs_quiesce_fs(
 	 * logged before we can write the unmount record.
 	 */
 	do {
-		xfs_sync_inodes(mp, SYNC_ATTR|SYNC_WAIT);
+		xfs_sync_attr(mp, SYNC_WAIT);
 		pincount = xfs_flush_buftarg(mp->m_ddev_targp, 1);
 		if (!pincount) {
 			delay(50);
@@ -433,8 +534,8 @@ xfs_flush_inodes_work(
 	void		*arg)
 {
 	struct inode	*inode = arg;
-	xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
-	xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
+	xfs_sync_data(mp, SYNC_TRYLOCK);
+	xfs_sync_data(mp, SYNC_TRYLOCK | SYNC_WAIT);
 	iput(inode);
 }
 
@@ -465,10 +566,10 @@ xfs_sync_worker(
 
 	if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
 		xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE);
-		xfs_reclaim_inodes(mp, 0, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
+		xfs_reclaim_inodes(mp, XFS_IFLUSH_DELWRI_ELSE_ASYNC);
 		/* dgc: errors ignored here */
-		error = XFS_QM_DQSYNC(mp, SYNC_BDFLUSH);
-		error = xfs_sync_fsdata(mp, SYNC_BDFLUSH);
+		error = xfs_qm_sync(mp, SYNC_TRYLOCK);
+		error = xfs_sync_fsdata(mp, SYNC_TRYLOCK);
 		if (xfs_log_need_covered(mp))
 			error = xfs_commit_dummy_trans(mp, XFS_LOG_FORCE);
 	}
@@ -569,7 +670,7 @@ xfs_reclaim_inode(
 			xfs_ifunlock(ip);
 			xfs_iunlock(ip, XFS_ILOCK_EXCL);
 		}
-		return 1;
+		return -EAGAIN;
 	}
 	__xfs_iflags_set(ip, XFS_IRECLAIM);
 	spin_unlock(&ip->i_flags_lock);
@@ -654,101 +755,27 @@ xfs_inode_clear_reclaim_tag(
 	xfs_put_perag(mp, pag);
 }
 
-
-STATIC void
-xfs_reclaim_inodes_ag(
-	xfs_mount_t	*mp,
-	int		ag,
-	int		noblock,
-	int		mode)
+STATIC int
+xfs_reclaim_inode_now(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
 {
-	xfs_inode_t	*ip = NULL;
-	xfs_perag_t	*pag = &mp->m_perag[ag];
-	int		nr_found;
-	uint32_t	first_index;
-	int		skipped;
-
-restart:
-	first_index = 0;
-	skipped = 0;
-	do {
-		/*
-		 * use a gang lookup to find the next inode in the tree
-		 * as the tree is sparse and a gang lookup walks to find
-		 * the number of objects requested.
-		 */
-		read_lock(&pag->pag_ici_lock);
-		nr_found = radix_tree_gang_lookup_tag(&pag->pag_ici_root,
-					(void**)&ip, first_index, 1,
-					XFS_ICI_RECLAIM_TAG);
-
-		if (!nr_found) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/*
-		 * Update the index for the next lookup. Catch overflows
-		 * into the next AG range which can occur if we have inodes
-		 * in the last block of the AG and we are currently
-		 * pointing to the last inode.
-		 */
-		first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
-		if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/* ignore if already under reclaim */
-		if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
-
-		if (noblock) {
-			if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-			if (xfs_ipincount(ip) ||
-			    !xfs_iflock_nowait(ip)) {
-				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-		}
+	/* ignore if already under reclaim */
+	if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
 		read_unlock(&pag->pag_ici_lock);
-
-		/*
-		 * hmmm - this is an inode already in reclaim. Do
-		 * we even bother catching it here?
-		 */
-		if (xfs_reclaim_inode(ip, noblock, mode))
-			skipped++;
-	} while (nr_found);
-
-	if (skipped) {
-		delay(1);
-		goto restart;
+		return 0;
 	}
-	return;
+	read_unlock(&pag->pag_ici_lock);
 
+	return xfs_reclaim_inode(ip, 0, flags);
 }
 
 int
 xfs_reclaim_inodes(
 	xfs_mount_t	*mp,
-	int		 noblock,
 	int		mode)
 {
-	int		i;
-
-	for (i = 0; i < mp->m_sb.sb_agcount; i++) {
-		if (!mp->m_perag[i].pag_ici_init)
-			continue;
-		xfs_reclaim_inodes_ag(mp, i, noblock, mode);
-	}
-	return 0;
+	return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode,
+					XFS_ICI_RECLAIM_TAG);
 }
-
-
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 308d5bf6dfb..2a10301c99c 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -29,17 +29,14 @@ typedef struct xfs_sync_work {
 	struct completion	*w_completion;
 } xfs_sync_work_t;
 
-#define SYNC_ATTR		0x0001	/* sync attributes */
-#define SYNC_DELWRI		0x0002	/* look at delayed writes */
-#define SYNC_WAIT		0x0004	/* wait for i/o to complete */
-#define SYNC_BDFLUSH		0x0008	/* BDFLUSH is calling -- don't block */
-#define SYNC_IOWAIT		0x0010  /* wait for all I/O to complete */
-#define SYNC_TRYLOCK		0x0020  /* only try to lock inodes */
+#define SYNC_WAIT		0x0001	/* wait for i/o to complete */
+#define SYNC_TRYLOCK		0x0002  /* only try to lock inodes */
 
 int xfs_syncd_init(struct xfs_mount *mp);
 void xfs_syncd_stop(struct xfs_mount *mp);
 
-int xfs_sync_inodes(struct xfs_mount *mp, int flags);
+int xfs_sync_attr(struct xfs_mount *mp, int flags);
+int xfs_sync_data(struct xfs_mount *mp, int flags);
 int xfs_sync_fsdata(struct xfs_mount *mp, int flags);
 
 int xfs_quiesce_data(struct xfs_mount *mp);
@@ -48,10 +45,16 @@ void xfs_quiesce_attr(struct xfs_mount *mp);
 void xfs_flush_inodes(struct xfs_inode *ip);
 
 int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
-int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
+int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
 
 void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
 void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
 void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
 				struct xfs_inode *ip);
+
+int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
+int xfs_inode_ag_iterator(struct xfs_mount *mp,
+	int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
+	int flags, int tag);
+
 #endif
diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c
index 964621fde6e..497c7fb75cc 100644
--- a/fs/xfs/linux-2.6/xfs_xattr.c
+++ b/fs/xfs/linux-2.6/xfs_xattr.c
@@ -29,67 +29,6 @@
 #include <linux/xattr.h>
 
 
-/*
- * ACL handling.  Should eventually be moved into xfs_acl.c
- */
-
-static int
-xfs_decode_acl(const char *name)
-{
-	if (strcmp(name, "posix_acl_access") == 0)
-		return _ACL_TYPE_ACCESS;
-	else if (strcmp(name, "posix_acl_default") == 0)
-		return _ACL_TYPE_DEFAULT;
-	return -EINVAL;
-}
-
-/*
- * Get system extended attributes which at the moment only
- * includes Posix ACLs.
- */
-static int
-xfs_xattr_system_get(struct inode *inode, const char *name,
-		void *buffer, size_t size)
-{
-	int acl;
-
-	acl = xfs_decode_acl(name);
-	if (acl < 0)
-		return acl;
-
-	return xfs_acl_vget(inode, buffer, size, acl);
-}
-
-static int
-xfs_xattr_system_set(struct inode *inode, const char *name,
-		const void *value, size_t size, int flags)
-{
-	int acl;
-
-	acl = xfs_decode_acl(name);
-	if (acl < 0)
-		return acl;
-	if (flags & XATTR_CREATE)
-		return -EINVAL;
-
-	if (!value)
-		return xfs_acl_vremove(inode, acl);
-
-	return xfs_acl_vset(inode, (void *)value, size, acl);
-}
-
-static struct xattr_handler xfs_xattr_system_handler = {
-	.prefix	= XATTR_SYSTEM_PREFIX,
-	.get	= xfs_xattr_system_get,
-	.set	= xfs_xattr_system_set,
-};
-
-
-/*
- * Real xattr handling.  The only difference between the namespaces is
- * a flag passed to the low-level attr code.
- */
-
 static int
 __xfs_xattr_get(struct inode *inode, const char *name,
 		void *value, size_t size, int xflags)
@@ -199,7 +138,9 @@ struct xattr_handler *xfs_xattr_handlers[] = {
 	&xfs_xattr_user_handler,
 	&xfs_xattr_trusted_handler,
 	&xfs_xattr_security_handler,
+#ifdef CONFIG_XFS_POSIX_ACL
 	&xfs_xattr_system_handler,
+#endif
 	NULL
 };
 
@@ -310,7 +251,7 @@ xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size)
 	/*
 	 * Then add the two synthetic ACL attributes.
 	 */
-	if (xfs_acl_vhasacl_access(inode)) {
+	if (posix_acl_access_exists(inode)) {
 		error = list_one_attr(POSIX_ACL_XATTR_ACCESS,
 				strlen(POSIX_ACL_XATTR_ACCESS) + 1,
 				data, size, &context.count);
@@ -318,7 +259,7 @@ xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size)
 			return error;
 	}
 
-	if (xfs_acl_vhasacl_default(inode)) {
+	if (posix_acl_default_exists(inode)) {
 		error = list_one_attr(POSIX_ACL_XATTR_DEFAULT,
 				strlen(POSIX_ACL_XATTR_DEFAULT) + 1,
 				data, size, &context.count);
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index e4babcc6342..2f3f2229eaa 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -1194,7 +1193,9 @@ void
 xfs_qm_dqrele(
 	xfs_dquot_t	*dqp)
 {
-	ASSERT(dqp);
+	if (!dqp)
+		return;
+
 	xfs_dqtrace_entry(dqp, "DQRELE");
 
 	xfs_dqlock(dqp);
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index de0f402ddb4..6533ead9b88 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -181,7 +181,6 @@ extern void		xfs_qm_adjust_dqlimits(xfs_mount_t *,
 extern int		xfs_qm_dqget(xfs_mount_t *, xfs_inode_t *,
 					xfs_dqid_t, uint, uint, xfs_dquot_t **);
 extern void		xfs_qm_dqput(xfs_dquot_t *);
-extern void		xfs_qm_dqrele(xfs_dquot_t *);
 extern void		xfs_dqlock(xfs_dquot_t *);
 extern void		xfs_dqlock2(xfs_dquot_t *, xfs_dquot_t *);
 extern void		xfs_dqunlock(xfs_dquot_t *);
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 1728f6a7c4f..d0d4a9a0bbd 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 5b6695049e0..45b1bfef738 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_bmap.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -287,11 +286,13 @@ xfs_qm_rele_quotafs_ref(
  * Just destroy the quotainfo structure.
  */
 void
-xfs_qm_unmount_quotadestroy(
-	xfs_mount_t	*mp)
+xfs_qm_unmount(
+	struct xfs_mount	*mp)
 {
-	if (mp->m_quotainfo)
+	if (mp->m_quotainfo) {
+		xfs_qm_dqpurge_all(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_UMOUNTING);
 		xfs_qm_destroy_quotainfo(mp);
+	}
 }
 
 
@@ -385,8 +386,13 @@ xfs_qm_mount_quotas(
 	if (error) {
 		xfs_fs_cmn_err(CE_WARN, mp,
 			"Failed to initialize disk quotas.");
+		return;
 	}
-	return;
+
+#ifdef QUOTADEBUG
+	if (XFS_IS_QUOTA_ON(mp))
+		xfs_qm_internalqcheck(mp);
+#endif
 }
 
 /*
@@ -774,12 +780,11 @@ xfs_qm_dqattach_grouphint(
  * Given a locked inode, attach dquot(s) to it, taking U/G/P-QUOTAON
  * into account.
  * If XFS_QMOPT_DQALLOC, the dquot(s) will be allocated if needed.
- * If XFS_QMOPT_ILOCKED, then inode sent is already locked EXCL.
  * Inode may get unlocked and relocked in here, and the caller must deal with
  * the consequences.
  */
 int
-xfs_qm_dqattach(
+xfs_qm_dqattach_locked(
 	xfs_inode_t	*ip,
 	uint		flags)
 {
@@ -787,17 +792,14 @@ xfs_qm_dqattach(
 	uint		nquotas = 0;
 	int		error = 0;
 
-	if ((! XFS_IS_QUOTA_ON(mp)) ||
-	    (! XFS_NOT_DQATTACHED(mp, ip)) ||
-	    (ip->i_ino == mp->m_sb.sb_uquotino) ||
-	    (ip->i_ino == mp->m_sb.sb_gquotino))
+	if (!XFS_IS_QUOTA_RUNNING(mp) ||
+	    !XFS_IS_QUOTA_ON(mp) ||
+	    !XFS_NOT_DQATTACHED(mp, ip) ||
+	    ip->i_ino == mp->m_sb.sb_uquotino ||
+	    ip->i_ino == mp->m_sb.sb_gquotino)
 		return 0;
 
-	ASSERT((flags & XFS_QMOPT_ILOCKED) == 0 ||
-	       xfs_isilocked(ip, XFS_ILOCK_EXCL));
-
-	if (! (flags & XFS_QMOPT_ILOCKED))
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 
 	if (XFS_IS_UQUOTA_ON(mp)) {
 		error = xfs_qm_dqattach_one(ip, ip->i_d.di_uid, XFS_DQ_USER,
@@ -849,8 +851,7 @@ xfs_qm_dqattach(
 		xfs_qm_dqattach_grouphint(ip->i_udquot, ip->i_gdquot);
 	}
 
-      done:
-
+ done:
 #ifdef QUOTADEBUG
 	if (! error) {
 		if (XFS_IS_UQUOTA_ON(mp))
@@ -858,15 +859,22 @@ xfs_qm_dqattach(
 		if (XFS_IS_OQUOTA_ON(mp))
 			ASSERT(ip->i_gdquot);
 	}
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 #endif
+	return error;
+}
 
-	if (! (flags & XFS_QMOPT_ILOCKED))
-		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+int
+xfs_qm_dqattach(
+	struct xfs_inode	*ip,
+	uint			flags)
+{
+	int			error;
+
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	error = xfs_qm_dqattach_locked(ip, flags);
+	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
-#ifdef QUOTADEBUG
-	else
-		ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-#endif
 	return error;
 }
 
@@ -896,11 +904,6 @@ xfs_qm_dqdetach(
 	}
 }
 
-/*
- * This is called to sync quotas. We can be told to use non-blocking
- * semantics by either the SYNC_BDFLUSH flag or the absence of the
- * SYNC_WAIT flag.
- */
 int
 xfs_qm_sync(
 	xfs_mount_t	*mp,
@@ -909,17 +912,13 @@ xfs_qm_sync(
 	int		recl, restarts;
 	xfs_dquot_t	*dqp;
 	uint		flush_flags;
-	boolean_t	nowait;
 	int		error;
 
-	if (! XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
+	flush_flags = (flags & SYNC_WAIT) ? XFS_QMOPT_SYNC : XFS_QMOPT_DELWRI;
 	restarts = 0;
-	/*
-	 * We won't block unless we are asked to.
-	 */
-	nowait = (boolean_t)(flags & SYNC_BDFLUSH || (flags & SYNC_WAIT) == 0);
 
   again:
 	xfs_qm_mplist_lock(mp);
@@ -939,18 +938,10 @@ xfs_qm_sync(
 		 * don't 'seem' to be dirty. ie. don't acquire dqlock.
 		 * This is very similar to what xfs_sync does with inodes.
 		 */
-		if (flags & SYNC_BDFLUSH) {
-			if (! XFS_DQ_IS_DIRTY(dqp))
+		if (flags & SYNC_TRYLOCK) {
+			if (!XFS_DQ_IS_DIRTY(dqp))
 				continue;
-		}
-
-		if (nowait) {
-			/*
-			 * Try to acquire the dquot lock. We are NOT out of
-			 * lock order, but we just don't want to wait for this
-			 * lock, unless somebody wanted us to.
-			 */
-			if (! xfs_qm_dqlock_nowait(dqp))
+			if (!xfs_qm_dqlock_nowait(dqp))
 				continue;
 		} else {
 			xfs_dqlock(dqp);
@@ -967,7 +958,7 @@ xfs_qm_sync(
 		/* XXX a sentinel would be better */
 		recl = XFS_QI_MPLRECLAIMS(mp);
 		if (!xfs_dqflock_nowait(dqp)) {
-			if (nowait) {
+			if (flags & SYNC_TRYLOCK) {
 				xfs_dqunlock(dqp);
 				continue;
 			}
@@ -985,7 +976,6 @@ xfs_qm_sync(
 		 * Let go of the mplist lock. We don't want to hold it
 		 * across a disk write
 		 */
-		flush_flags = (nowait) ? XFS_QMOPT_DELWRI : XFS_QMOPT_SYNC;
 		xfs_qm_mplist_unlock(mp);
 		xfs_dqtrace_entry(dqp, "XQM_SYNC: DQFLUSH");
 		error = xfs_qm_dqflush(dqp, flush_flags);
@@ -2319,20 +2309,20 @@ xfs_qm_write_sb_changes(
  */
 int
 xfs_qm_vop_dqalloc(
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip,
-	uid_t		uid,
-	gid_t		gid,
-	prid_t		prid,
-	uint		flags,
-	xfs_dquot_t	**O_udqpp,
-	xfs_dquot_t	**O_gdqpp)
+	struct xfs_inode	*ip,
+	uid_t			uid,
+	gid_t			gid,
+	prid_t			prid,
+	uint			flags,
+	struct xfs_dquot	**O_udqpp,
+	struct xfs_dquot	**O_gdqpp)
 {
-	int		error;
-	xfs_dquot_t	*uq, *gq;
-	uint		lockflags;
+	struct xfs_mount	*mp = ip->i_mount;
+	struct xfs_dquot	*uq, *gq;
+	int			error;
+	uint			lockflags;
 
-	if (!XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
 	lockflags = XFS_ILOCK_EXCL;
@@ -2346,8 +2336,8 @@ xfs_qm_vop_dqalloc(
 	 * if necessary. The dquot(s) will not be locked.
 	 */
 	if (XFS_NOT_DQATTACHED(mp, ip)) {
-		if ((error = xfs_qm_dqattach(ip, XFS_QMOPT_DQALLOC |
-					    XFS_QMOPT_ILOCKED))) {
+		error = xfs_qm_dqattach_locked(ip, XFS_QMOPT_DQALLOC);
+		if (error) {
 			xfs_iunlock(ip, lockflags);
 			return error;
 		}
@@ -2469,6 +2459,7 @@ xfs_qm_vop_chown(
 	uint		bfield = XFS_IS_REALTIME_INODE(ip) ?
 				 XFS_TRANS_DQ_RTBCOUNT : XFS_TRANS_DQ_BCOUNT;
 
+
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 	ASSERT(XFS_IS_QUOTA_RUNNING(ip->i_mount));
 
@@ -2508,13 +2499,13 @@ xfs_qm_vop_chown_reserve(
 	xfs_dquot_t	*gdqp,
 	uint		flags)
 {
-	int		error;
-	xfs_mount_t	*mp;
+	xfs_mount_t	*mp = ip->i_mount;
 	uint		delblks, blkflags, prjflags = 0;
 	xfs_dquot_t	*unresudq, *unresgdq, *delblksudq, *delblksgdq;
+	int		error;
+
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
-	mp = ip->i_mount;
 	ASSERT(XFS_IS_QUOTA_RUNNING(mp));
 
 	delblks = ip->i_delayed_blks;
@@ -2582,28 +2573,23 @@ xfs_qm_vop_chown_reserve(
 
 int
 xfs_qm_vop_rename_dqattach(
-	xfs_inode_t	**i_tab)
+	struct xfs_inode	**i_tab)
 {
-	xfs_inode_t	*ip;
-	int		i;
-	int		error;
+	struct xfs_mount	*mp = i_tab[0]->i_mount;
+	int			i;
 
-	ip = i_tab[0];
-
-	if (! XFS_IS_QUOTA_ON(ip->i_mount))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
-	if (XFS_NOT_DQATTACHED(ip->i_mount, ip)) {
-		error = xfs_qm_dqattach(ip, 0);
-		if (error)
-			return error;
-	}
-	for (i = 1; (i < 4 && i_tab[i]); i++) {
+	for (i = 0; (i < 4 && i_tab[i]); i++) {
+		struct xfs_inode	*ip = i_tab[i];
+		int			error;
+
 		/*
 		 * Watch out for duplicate entries in the table.
 		 */
-		if ((ip = i_tab[i]) != i_tab[i-1]) {
-			if (XFS_NOT_DQATTACHED(ip->i_mount, ip)) {
+		if (i == 0 || ip != i_tab[i-1]) {
+			if (XFS_NOT_DQATTACHED(mp, ip)) {
 				error = xfs_qm_dqattach(ip, 0);
 				if (error)
 					return error;
@@ -2614,17 +2600,19 @@ xfs_qm_vop_rename_dqattach(
 }
 
 void
-xfs_qm_vop_dqattach_and_dqmod_newinode(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip,
-	xfs_dquot_t	*udqp,
-	xfs_dquot_t	*gdqp)
+xfs_qm_vop_create_dqattach(
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip,
+	struct xfs_dquot	*udqp,
+	struct xfs_dquot	*gdqp)
 {
-	if (!XFS_IS_QUOTA_ON(tp->t_mountp))
+	struct xfs_mount	*mp = tp->t_mountp;
+
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(XFS_IS_QUOTA_RUNNING(tp->t_mountp));
+	ASSERT(XFS_IS_QUOTA_RUNNING(mp));
 
 	if (udqp) {
 		xfs_dqlock(udqp);
@@ -2632,7 +2620,7 @@ xfs_qm_vop_dqattach_and_dqmod_newinode(
 		xfs_dqunlock(udqp);
 		ASSERT(ip->i_udquot == NULL);
 		ip->i_udquot = udqp;
-		ASSERT(XFS_IS_UQUOTA_ON(tp->t_mountp));
+		ASSERT(XFS_IS_UQUOTA_ON(mp));
 		ASSERT(ip->i_d.di_uid == be32_to_cpu(udqp->q_core.d_id));
 		xfs_trans_mod_dquot(tp, udqp, XFS_TRANS_DQ_ICOUNT, 1);
 	}
@@ -2642,8 +2630,8 @@ xfs_qm_vop_dqattach_and_dqmod_newinode(
 		xfs_dqunlock(gdqp);
 		ASSERT(ip->i_gdquot == NULL);
 		ip->i_gdquot = gdqp;
-		ASSERT(XFS_IS_OQUOTA_ON(tp->t_mountp));
-		ASSERT((XFS_IS_GQUOTA_ON(tp->t_mountp) ?
+		ASSERT(XFS_IS_OQUOTA_ON(mp));
+		ASSERT((XFS_IS_GQUOTA_ON(mp) ?
 			ip->i_d.di_gid : ip->i_d.di_projid) ==
 				be32_to_cpu(gdqp->q_core.d_id));
 		xfs_trans_mod_dquot(tp, gdqp, XFS_TRANS_DQ_ICOUNT, 1);
diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/quota/xfs_qm.h
index a371954cae1..495564b8af3 100644
--- a/fs/xfs/quota/xfs_qm.h
+++ b/fs/xfs/quota/xfs_qm.h
@@ -127,8 +127,6 @@ typedef struct xfs_quotainfo {
 } xfs_quotainfo_t;
 
 
-extern xfs_dqtrxops_t	xfs_trans_dquot_ops;
-
 extern void	xfs_trans_mod_dquot(xfs_trans_t *, xfs_dquot_t *, uint, long);
 extern int	xfs_trans_reserve_quota_bydquots(xfs_trans_t *, xfs_mount_t *,
 			xfs_dquot_t *, xfs_dquot_t *, long, long, uint);
@@ -159,17 +157,11 @@ typedef struct xfs_dquot_acct {
 #define XFS_QM_RTBWARNLIMIT	5
 
 extern void		xfs_qm_destroy_quotainfo(xfs_mount_t *);
-extern void		xfs_qm_mount_quotas(xfs_mount_t *);
 extern int		xfs_qm_quotacheck(xfs_mount_t *);
-extern void		xfs_qm_unmount_quotadestroy(xfs_mount_t *);
-extern void		xfs_qm_unmount_quotas(xfs_mount_t *);
 extern int		xfs_qm_write_sb_changes(xfs_mount_t *, __int64_t);
-extern int		xfs_qm_sync(xfs_mount_t *, int);
 
 /* dquot stuff */
 extern boolean_t	xfs_qm_dqalloc_incore(xfs_dquot_t **);
-extern int		xfs_qm_dqattach(xfs_inode_t *, uint);
-extern void		xfs_qm_dqdetach(xfs_inode_t *);
 extern int		xfs_qm_dqpurge_all(xfs_mount_t *, uint);
 extern void		xfs_qm_dqrele_all_inodes(xfs_mount_t *, uint);
 
@@ -183,19 +175,6 @@ extern int		xfs_qm_scall_getqstat(xfs_mount_t *, fs_quota_stat_t *);
 extern int		xfs_qm_scall_quotaon(xfs_mount_t *, uint);
 extern int		xfs_qm_scall_quotaoff(xfs_mount_t *, uint);
 
-/* vop stuff */
-extern int		xfs_qm_vop_dqalloc(xfs_mount_t *, xfs_inode_t *,
-					uid_t, gid_t, prid_t, uint,
-					xfs_dquot_t **, xfs_dquot_t **);
-extern void		xfs_qm_vop_dqattach_and_dqmod_newinode(
-					xfs_trans_t *, xfs_inode_t *,
-					xfs_dquot_t *, xfs_dquot_t *);
-extern int		xfs_qm_vop_rename_dqattach(xfs_inode_t **);
-extern xfs_dquot_t *	xfs_qm_vop_chown(xfs_trans_t *, xfs_inode_t *,
-					xfs_dquot_t **, xfs_dquot_t *);
-extern int		xfs_qm_vop_chown_reserve(xfs_trans_t *, xfs_inode_t *,
-					xfs_dquot_t *, xfs_dquot_t *, uint);
-
 /* list stuff */
 extern void		xfs_qm_freelist_append(xfs_frlist_t *, xfs_dquot_t *);
 extern void		xfs_qm_freelist_unlink(xfs_dquot_t *);
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 63037c689a4..a5346630dfa 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -42,7 +42,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
@@ -84,7 +83,7 @@ xfs_fill_statvfs_from_dquot(
  * return a statvfs of the project, not the entire filesystem.
  * This makes such trees appear as if they are filesystems in themselves.
  */
-STATIC void
+void
 xfs_qm_statvfs(
 	xfs_inode_t		*ip,
 	struct kstatfs		*statp)
@@ -92,20 +91,13 @@ xfs_qm_statvfs(
 	xfs_mount_t		*mp = ip->i_mount;
 	xfs_dquot_t		*dqp;
 
-	if (!(ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) ||
-	    !((mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))) ==
-	    		      (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
-		return;
-
 	if (!xfs_qm_dqget(mp, NULL, ip->i_d.di_projid, XFS_DQ_PROJ, 0, &dqp)) {
-		xfs_disk_dquot_t	*dp = &dqp->q_core;
-
-		xfs_fill_statvfs_from_dquot(statp, dp);
+		xfs_fill_statvfs_from_dquot(statp, &dqp->q_core);
 		xfs_qm_dqput(dqp);
 	}
 }
 
-STATIC int
+int
 xfs_qm_newmount(
 	xfs_mount_t	*mp,
 	uint		*needquotamount,
@@ -114,9 +106,6 @@ xfs_qm_newmount(
 	uint		quotaondisk;
 	uint		uquotaondisk = 0, gquotaondisk = 0, pquotaondisk = 0;
 
-	*quotaflags = 0;
-	*needquotamount = B_FALSE;
-
 	quotaondisk = xfs_sb_version_hasquota(&mp->m_sb) &&
 				(mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT);
 
@@ -179,66 +168,6 @@ xfs_qm_newmount(
 	return 0;
 }
 
-STATIC int
-xfs_qm_endmount(
-	xfs_mount_t	*mp,
-	uint		needquotamount,
-	uint		quotaflags)
-{
-	if (needquotamount) {
-		ASSERT(mp->m_qflags == 0);
-		mp->m_qflags = quotaflags;
-		xfs_qm_mount_quotas(mp);
-	}
-
-#if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
-	if (! (XFS_IS_QUOTA_ON(mp)))
-		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas not turned on");
-	else
-		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas turned on");
-#endif
-
-#ifdef QUOTADEBUG
-	if (XFS_IS_QUOTA_ON(mp) && xfs_qm_internalqcheck(mp))
-		cmn_err(CE_WARN, "XFS: mount internalqcheck failed");
-#endif
-
-	return 0;
-}
-
-STATIC void
-xfs_qm_dqrele_null(
-	xfs_dquot_t	*dq)
-{
-	/*
-	 * Called from XFS, where we always check first for a NULL dquot.
-	 */
-	if (!dq)
-		return;
-	xfs_qm_dqrele(dq);
-}
-
-
-struct xfs_qmops xfs_qmcore_xfs = {
-	.xfs_qminit		= xfs_qm_newmount,
-	.xfs_qmdone		= xfs_qm_unmount_quotadestroy,
-	.xfs_qmmount		= xfs_qm_endmount,
-	.xfs_qmunmount		= xfs_qm_unmount_quotas,
-	.xfs_dqrele		= xfs_qm_dqrele_null,
-	.xfs_dqattach		= xfs_qm_dqattach,
-	.xfs_dqdetach		= xfs_qm_dqdetach,
-	.xfs_dqpurgeall		= xfs_qm_dqpurge_all,
-	.xfs_dqvopalloc		= xfs_qm_vop_dqalloc,
-	.xfs_dqvopcreate	= xfs_qm_vop_dqattach_and_dqmod_newinode,
-	.xfs_dqvoprename	= xfs_qm_vop_rename_dqattach,
-	.xfs_dqvopchown		= xfs_qm_vop_chown,
-	.xfs_dqvopchownresv	= xfs_qm_vop_chown_reserve,
-	.xfs_dqstatvfs		= xfs_qm_statvfs,
-	.xfs_dqsync		= xfs_qm_sync,
-	.xfs_dqtrxops		= &xfs_trans_dquot_ops,
-};
-EXPORT_SYMBOL(xfs_qmcore_xfs);
-
 void __init
 xfs_qm_init(void)
 {
diff --git a/fs/xfs/quota/xfs_qm_stats.c b/fs/xfs/quota/xfs_qm_stats.c
index 709f5f545cf..21b08c0396a 100644
--- a/fs/xfs/quota/xfs_qm_stats.c
+++ b/fs/xfs/quota/xfs_qm_stats.c
@@ -42,7 +42,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index c7b66f6506c..4e4276b956e 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -45,7 +45,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -847,105 +846,55 @@ xfs_qm_export_flags(
 }
 
 
-/*
- * Release all the dquots on the inodes in an AG.
- */
-STATIC void
-xfs_qm_dqrele_inodes_ag(
-	xfs_mount_t	*mp,
-	int		ag,
-	uint		flags)
+STATIC int
+xfs_dqrele_inode(
+	struct xfs_inode	*ip,
+	struct xfs_perag	*pag,
+	int			flags)
 {
-	xfs_inode_t	*ip = NULL;
-	xfs_perag_t	*pag = &mp->m_perag[ag];
-	int		first_index = 0;
-	int		nr_found;
-
-	do {
-		/*
-		 * use a gang lookup to find the next inode in the tree
-		 * as the tree is sparse and a gang lookup walks to find
-		 * the number of objects requested.
-		 */
-		read_lock(&pag->pag_ici_lock);
-		nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
-				(void**)&ip, first_index, 1);
-
-		if (!nr_found) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/*
-		 * Update the index for the next lookup. Catch overflows
-		 * into the next AG range which can occur if we have inodes
-		 * in the last block of the AG and we are currently
-		 * pointing to the last inode.
-		 */
-		first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
-		if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino)) {
-			read_unlock(&pag->pag_ici_lock);
-			break;
-		}
-
-		/* skip quota inodes */
-		if (ip == XFS_QI_UQIP(mp) || ip == XFS_QI_GQIP(mp)) {
-			ASSERT(ip->i_udquot == NULL);
-			ASSERT(ip->i_gdquot == NULL);
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
+	int			error;
 
-		/*
-		 * If we can't get a reference on the inode, it must be
-		 * in reclaim. Leave it for the reclaim code to flush.
-		 */
-		if (!igrab(VFS_I(ip))) {
-			read_unlock(&pag->pag_ici_lock);
-			continue;
-		}
+	/* skip quota inodes */
+	if (ip == XFS_QI_UQIP(ip->i_mount) || ip == XFS_QI_GQIP(ip->i_mount)) {
+		ASSERT(ip->i_udquot == NULL);
+		ASSERT(ip->i_gdquot == NULL);
 		read_unlock(&pag->pag_ici_lock);
+		return 0;
+	}
 
-		/* avoid new inodes though we shouldn't find any here */
-		if (xfs_iflags_test(ip, XFS_INEW)) {
-			IRELE(ip);
-			continue;
-		}
+	error = xfs_sync_inode_valid(ip, pag);
+	if (error)
+		return error;
 
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		if ((flags & XFS_UQUOTA_ACCT) && ip->i_udquot) {
-			xfs_qm_dqrele(ip->i_udquot);
-			ip->i_udquot = NULL;
-		}
-		if (flags & (XFS_PQUOTA_ACCT|XFS_GQUOTA_ACCT) &&
-		    ip->i_gdquot) {
-			xfs_qm_dqrele(ip->i_gdquot);
-			ip->i_gdquot = NULL;
-		}
-		xfs_iput(ip, XFS_ILOCK_EXCL);
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	if ((flags & XFS_UQUOTA_ACCT) && ip->i_udquot) {
+		xfs_qm_dqrele(ip->i_udquot);
+		ip->i_udquot = NULL;
+	}
+	if (flags & (XFS_PQUOTA_ACCT|XFS_GQUOTA_ACCT) && ip->i_gdquot) {
+		xfs_qm_dqrele(ip->i_gdquot);
+		ip->i_gdquot = NULL;
+	}
+	xfs_iput(ip, XFS_ILOCK_EXCL);
+	IRELE(ip);
 
-	} while (nr_found);
+	return 0;
 }
 
+
 /*
  * Go thru all the inodes in the file system, releasing their dquots.
+ *
  * Note that the mount structure gets modified to indicate that quotas are off
- * AFTER this, in the case of quotaoff. This also gets called from
- * xfs_rootumount.
+ * AFTER this, in the case of quotaoff.
  */
 void
 xfs_qm_dqrele_all_inodes(
 	struct xfs_mount *mp,
 	uint		 flags)
 {
-	int		i;
-
 	ASSERT(mp->m_quotainfo);
-	for (i = 0; i < mp->m_sb.sb_agcount; i++) {
-		if (!mp->m_perag[i].pag_ici_init)
-			continue;
-		xfs_qm_dqrele_inodes_ag(mp, i, flags);
-	}
+	xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG);
 }
 
 /*------------------------------------------------------------------------*/
diff --git a/fs/xfs/quota/xfs_trans_dquot.c b/fs/xfs/quota/xfs_trans_dquot.c
index 447173bcf96..97ac9640be9 100644
--- a/fs/xfs/quota/xfs_trans_dquot.c
+++ b/fs/xfs/quota/xfs_trans_dquot.c
@@ -42,7 +42,6 @@
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
@@ -111,7 +110,7 @@ xfs_trans_log_dquot(
  * Carry forward whatever is left of the quota blk reservation to
  * the spanky new transaction
  */
-STATIC void
+void
 xfs_trans_dup_dqinfo(
 	xfs_trans_t	*otp,
 	xfs_trans_t	*ntp)
@@ -167,19 +166,17 @@ xfs_trans_dup_dqinfo(
 /*
  * Wrap around mod_dquot to account for both user and group quotas.
  */
-STATIC void
+void
 xfs_trans_mod_dquot_byino(
 	xfs_trans_t	*tp,
 	xfs_inode_t	*ip,
 	uint		field,
 	long		delta)
 {
-	xfs_mount_t	*mp;
-
-	ASSERT(tp);
-	mp = tp->t_mountp;
+	xfs_mount_t	*mp = tp->t_mountp;
 
-	if (!XFS_IS_QUOTA_ON(mp) ||
+	if (!XFS_IS_QUOTA_RUNNING(mp) ||
+	    !XFS_IS_QUOTA_ON(mp) ||
 	    ip->i_ino == mp->m_sb.sb_uquotino ||
 	    ip->i_ino == mp->m_sb.sb_gquotino)
 		return;
@@ -229,6 +226,7 @@ xfs_trans_mod_dquot(
 	xfs_dqtrx_t	*qtrx;
 
 	ASSERT(tp);
+	ASSERT(XFS_IS_QUOTA_RUNNING(tp->t_mountp));
 	qtrx = NULL;
 
 	if (tp->t_dqinfo == NULL)
@@ -346,7 +344,7 @@ xfs_trans_dqlockedjoin(
  * Unreserve just the reservations done by this transaction.
  * dquot is still left locked at exit.
  */
-STATIC void
+void
 xfs_trans_apply_dquot_deltas(
 	xfs_trans_t		*tp)
 {
@@ -357,7 +355,7 @@ xfs_trans_apply_dquot_deltas(
 	long			totalbdelta;
 	long			totalrtbdelta;
 
-	if (! (tp->t_flags & XFS_TRANS_DQ_DIRTY))
+	if (!(tp->t_flags & XFS_TRANS_DQ_DIRTY))
 		return;
 
 	ASSERT(tp->t_dqinfo);
@@ -531,7 +529,7 @@ xfs_trans_apply_dquot_deltas(
  * we simply throw those away, since that's the expected behavior
  * when a transaction is curtailed without a commit.
  */
-STATIC void
+void
 xfs_trans_unreserve_and_mod_dquots(
 	xfs_trans_t		*tp)
 {
@@ -768,7 +766,7 @@ xfs_trans_reserve_quota_bydquots(
 {
 	int		resvd = 0, error;
 
-	if (!XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 
 	if (tp && tp->t_dqinfo == NULL)
@@ -811,18 +809,17 @@ xfs_trans_reserve_quota_bydquots(
  * This doesn't change the actual usage, just the reservation.
  * The inode sent in is locked.
  */
-STATIC int
+int
 xfs_trans_reserve_quota_nblks(
-	xfs_trans_t	*tp,
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip,
-	long		nblks,
-	long		ninos,
-	uint		flags)
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip,
+	long			nblks,
+	long			ninos,
+	uint			flags)
 {
-	int		error;
+	struct xfs_mount	*mp = ip->i_mount;
 
-	if (!XFS_IS_QUOTA_ON(mp))
+	if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
 		return 0;
 	if (XFS_IS_PQUOTA_ON(mp))
 		flags |= XFS_QMOPT_ENOSPC;
@@ -831,7 +828,6 @@ xfs_trans_reserve_quota_nblks(
 	ASSERT(ip->i_ino != mp->m_sb.sb_gquotino);
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(XFS_IS_QUOTA_RUNNING(ip->i_mount));
 	ASSERT((flags & ~(XFS_QMOPT_FORCE_RES | XFS_QMOPT_ENOSPC)) ==
 				XFS_TRANS_DQ_RES_RTBLKS ||
 	       (flags & ~(XFS_QMOPT_FORCE_RES | XFS_QMOPT_ENOSPC)) ==
@@ -840,11 +836,9 @@ xfs_trans_reserve_quota_nblks(
 	/*
 	 * Reserve nblks against these dquots, with trans as the mediator.
 	 */
-	error = xfs_trans_reserve_quota_bydquots(tp, mp,
-						 ip->i_udquot, ip->i_gdquot,
-						 nblks, ninos,
-						 flags);
-	return error;
+	return xfs_trans_reserve_quota_bydquots(tp, mp,
+						ip->i_udquot, ip->i_gdquot,
+						nblks, ninos, flags);
 }
 
 /*
@@ -895,25 +889,15 @@ STATIC void
 xfs_trans_alloc_dqinfo(
 	xfs_trans_t	*tp)
 {
-	(tp)->t_dqinfo = kmem_zone_zalloc(xfs_Gqm->qm_dqtrxzone, KM_SLEEP);
+	tp->t_dqinfo = kmem_zone_zalloc(xfs_Gqm->qm_dqtrxzone, KM_SLEEP);
 }
 
-STATIC void
+void
 xfs_trans_free_dqinfo(
 	xfs_trans_t	*tp)
 {
 	if (!tp->t_dqinfo)
 		return;
-	kmem_zone_free(xfs_Gqm->qm_dqtrxzone, (tp)->t_dqinfo);
-	(tp)->t_dqinfo = NULL;
+	kmem_zone_free(xfs_Gqm->qm_dqtrxzone, tp->t_dqinfo);
+	tp->t_dqinfo = NULL;
 }
-
-xfs_dqtrxops_t	xfs_trans_dquot_ops = {
-	.qo_dup_dqinfo			= xfs_trans_dup_dqinfo,
-	.qo_free_dqinfo			= xfs_trans_free_dqinfo,
-	.qo_mod_dquot_byino		= xfs_trans_mod_dquot_byino,
-	.qo_apply_dquot_deltas		= xfs_trans_apply_dquot_deltas,
-	.qo_reserve_quota_nblks		= xfs_trans_reserve_quota_nblks,
-	.qo_reserve_quota_bydquots	= xfs_trans_reserve_quota_bydquots,
-	.qo_unreserve_and_mod_dquots	= xfs_trans_unreserve_and_mod_dquots,
-};
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
deleted file mode 100644
index a8cdd73999a..00000000000
--- a/fs/xfs/xfs_acl.c
+++ /dev/null
@@ -1,874 +0,0 @@
-/*
- * Copyright (c) 2001-2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_bit.h"
-#include "xfs_inum.h"
-#include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
-#include "xfs_inode.h"
-#include "xfs_btree.h"
-#include "xfs_acl.h"
-#include "xfs_attr.h"
-#include "xfs_vnodeops.h"
-
-#include <linux/capability.h>
-#include <linux/posix_acl_xattr.h>
-
-STATIC int	xfs_acl_setmode(struct inode *, xfs_acl_t *, int *);
-STATIC void     xfs_acl_filter_mode(mode_t, xfs_acl_t *);
-STATIC void	xfs_acl_get_endian(xfs_acl_t *);
-STATIC int	xfs_acl_access(uid_t, gid_t, xfs_acl_t *, mode_t, cred_t *);
-STATIC int	xfs_acl_invalid(xfs_acl_t *);
-STATIC void	xfs_acl_sync_mode(mode_t, xfs_acl_t *);
-STATIC void	xfs_acl_get_attr(struct inode *, xfs_acl_t *, int, int, int *);
-STATIC void	xfs_acl_set_attr(struct inode *, xfs_acl_t *, int, int *);
-STATIC int	xfs_acl_allow_set(struct inode *, int);
-
-kmem_zone_t *xfs_acl_zone;
-
-
-/*
- * Test for existence of access ACL attribute as efficiently as possible.
- */
-int
-xfs_acl_vhasacl_access(
-	struct inode	*vp)
-{
-	int		error;
-
-	xfs_acl_get_attr(vp, NULL, _ACL_TYPE_ACCESS, ATTR_KERNOVAL, &error);
-	return (error == 0);
-}
-
-/*
- * Test for existence of default ACL attribute as efficiently as possible.
- */
-int
-xfs_acl_vhasacl_default(
-	struct inode	*vp)
-{
-	int		error;
-
-	if (!S_ISDIR(vp->i_mode))
-		return 0;
-	xfs_acl_get_attr(vp, NULL, _ACL_TYPE_DEFAULT, ATTR_KERNOVAL, &error);
-	return (error == 0);
-}
-
-/*
- * Convert from extended attribute representation to in-memory for XFS.
- */
-STATIC int
-posix_acl_xattr_to_xfs(
-	posix_acl_xattr_header	*src,
-	size_t			size,
-	xfs_acl_t		*dest)
-{
-	posix_acl_xattr_entry	*src_entry;
-	xfs_acl_entry_t		*dest_entry;
-	int			n;
-
-	if (!src || !dest)
-		return EINVAL;
-
-	if (size < sizeof(posix_acl_xattr_header))
-		return EINVAL;
-
-	if (src->a_version != cpu_to_le32(POSIX_ACL_XATTR_VERSION))
-		return EOPNOTSUPP;
-
-	memset(dest, 0, sizeof(xfs_acl_t));
-	dest->acl_cnt = posix_acl_xattr_count(size);
-	if (dest->acl_cnt < 0 || dest->acl_cnt > XFS_ACL_MAX_ENTRIES)
-		return EINVAL;
-
-	/*
-	 * acl_set_file(3) may request that we set default ACLs with
-	 * zero length -- defend (gracefully) against that here.
-	 */
-	if (!dest->acl_cnt)
-		return 0;
-
-	src_entry = (posix_acl_xattr_entry *)((char *)src + sizeof(*src));
-	dest_entry = &dest->acl_entry[0];
-
-	for (n = 0; n < dest->acl_cnt; n++, src_entry++, dest_entry++) {
-		dest_entry->ae_perm = le16_to_cpu(src_entry->e_perm);
-		if (_ACL_PERM_INVALID(dest_entry->ae_perm))
-			return EINVAL;
-		dest_entry->ae_tag  = le16_to_cpu(src_entry->e_tag);
-		switch(dest_entry->ae_tag) {
-		case ACL_USER:
-		case ACL_GROUP:
-			dest_entry->ae_id = le32_to_cpu(src_entry->e_id);
-			break;
-		case ACL_USER_OBJ:
-		case ACL_GROUP_OBJ:
-		case ACL_MASK:
-		case ACL_OTHER:
-			dest_entry->ae_id = ACL_UNDEFINED_ID;
-			break;
-		default:
-			return EINVAL;
-		}
-	}
-	if (xfs_acl_invalid(dest))
-		return EINVAL;
-
-	return 0;
-}
-
-/*
- * Comparison function called from xfs_sort().
- * Primary key is ae_tag, secondary key is ae_id.
- */
-STATIC int
-xfs_acl_entry_compare(
-	const void	*va,
-	const void	*vb)
-{
-	xfs_acl_entry_t	*a = (xfs_acl_entry_t *)va,
-			*b = (xfs_acl_entry_t *)vb;
-
-	if (a->ae_tag == b->ae_tag)
-		return (a->ae_id - b->ae_id);
-	return (a->ae_tag - b->ae_tag);
-}
-
-/*
- * Convert from in-memory XFS to extended attribute representation.
- */
-STATIC int
-posix_acl_xfs_to_xattr(
-	xfs_acl_t		*src,
-	posix_acl_xattr_header	*dest,
-	size_t			size)
-{
-	int			n;
-	size_t			new_size = posix_acl_xattr_size(src->acl_cnt);
-	posix_acl_xattr_entry	*dest_entry;
-	xfs_acl_entry_t		*src_entry;
-
-	if (size < new_size)
-		return -ERANGE;
-
-	/* Need to sort src XFS ACL by <ae_tag,ae_id> */
-	xfs_sort(src->acl_entry, src->acl_cnt, sizeof(src->acl_entry[0]),
-		 xfs_acl_entry_compare);
-
-	dest->a_version = cpu_to_le32(POSIX_ACL_XATTR_VERSION);
-	dest_entry = &dest->a_entries[0];
-	src_entry = &src->acl_entry[0];
-	for (n = 0; n < src->acl_cnt; n++, dest_entry++, src_entry++) {
-		dest_entry->e_perm = cpu_to_le16(src_entry->ae_perm);
-		if (_ACL_PERM_INVALID(src_entry->ae_perm))
-			return -EINVAL;
-		dest_entry->e_tag  = cpu_to_le16(src_entry->ae_tag);
-		switch (src_entry->ae_tag) {
-		case ACL_USER:
-		case ACL_GROUP:
-			dest_entry->e_id = cpu_to_le32(src_entry->ae_id);
-				break;
-		case ACL_USER_OBJ:
-		case ACL_GROUP_OBJ:
-		case ACL_MASK:
-		case ACL_OTHER:
-			dest_entry->e_id = cpu_to_le32(ACL_UNDEFINED_ID);
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
-	return new_size;
-}
-
-int
-xfs_acl_vget(
-	struct inode	*vp,
-	void		*acl,
-	size_t		size,
-	int		kind)
-{
-	int			error;
-	xfs_acl_t		*xfs_acl = NULL;
-	posix_acl_xattr_header	*ext_acl = acl;
-	int			flags = 0;
-
-	if(size) {
-		if (!(_ACL_ALLOC(xfs_acl))) {
-			error = ENOMEM;
-			goto out;
-		}
-		memset(xfs_acl, 0, sizeof(xfs_acl_t));
-	} else
-		flags = ATTR_KERNOVAL;
-
-	xfs_acl_get_attr(vp, xfs_acl, kind, flags, &error);
-	if (error)
-		goto out;
-
-	if (!size) {
-		error = -posix_acl_xattr_size(XFS_ACL_MAX_ENTRIES);
-	} else {
-		if (xfs_acl_invalid(xfs_acl)) {
-			error = EINVAL;
-			goto out;
-		}
-		if (kind == _ACL_TYPE_ACCESS)
-			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, xfs_acl);
-		error = -posix_acl_xfs_to_xattr(xfs_acl, ext_acl, size);
-	}
-out:
-	if(xfs_acl)
-		_ACL_FREE(xfs_acl);
-	return -error;
-}
-
-int
-xfs_acl_vremove(
-	struct inode	*vp,
-	int		kind)
-{
-	int		error;
-
-	error = xfs_acl_allow_set(vp, kind);
-	if (!error) {
-		error = xfs_attr_remove(XFS_I(vp),
-						kind == _ACL_TYPE_DEFAULT?
-						SGI_ACL_DEFAULT: SGI_ACL_FILE,
-						ATTR_ROOT);
-		if (error == ENOATTR)
-			error = 0;	/* 'scool */
-	}
-	return -error;
-}
-
-int
-xfs_acl_vset(
-	struct inode		*vp,
-	void			*acl,
-	size_t			size,
-	int			kind)
-{
-	posix_acl_xattr_header	*ext_acl = acl;
-	xfs_acl_t		*xfs_acl;
-	int			error;
-	int			basicperms = 0; /* more than std unix perms? */
-
-	if (!acl)
-		return -EINVAL;
-
-	if (!(_ACL_ALLOC(xfs_acl)))
-		return -ENOMEM;
-
-	error = posix_acl_xattr_to_xfs(ext_acl, size, xfs_acl);
-	if (error) {
-		_ACL_FREE(xfs_acl);
-		return -error;
-	}
-	if (!xfs_acl->acl_cnt) {
-		_ACL_FREE(xfs_acl);
-		return 0;
-	}
-
-	error = xfs_acl_allow_set(vp, kind);
-
-	/* Incoming ACL exists, set file mode based on its value */
-	if (!error && kind == _ACL_TYPE_ACCESS)
-		error = xfs_acl_setmode(vp, xfs_acl, &basicperms);
-
-	if (error)
-		goto out;
-
-	/*
-	 * If we have more than std unix permissions, set up the actual attr.
-	 * Otherwise, delete any existing attr.  This prevents us from
-	 * having actual attrs for permissions that can be stored in the
-	 * standard permission bits.
-	 */
-	if (!basicperms) {
-		xfs_acl_set_attr(vp, xfs_acl, kind, &error);
-	} else {
-		error = -xfs_acl_vremove(vp, _ACL_TYPE_ACCESS);
-	}
-
-out:
-	_ACL_FREE(xfs_acl);
-	return -error;
-}
-
-int
-xfs_acl_iaccess(
-	xfs_inode_t	*ip,
-	mode_t		mode,
-	cred_t		*cr)
-{
-	xfs_acl_t	*acl;
-	int		rval;
-	struct xfs_name	acl_name = {SGI_ACL_FILE, SGI_ACL_FILE_SIZE};
-
-	if (!(_ACL_ALLOC(acl)))
-		return -1;
-
-	/* If the file has no ACL return -1. */
-	rval = sizeof(xfs_acl_t);
-	if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, ATTR_ROOT)) {
-		_ACL_FREE(acl);
-		return -1;
-	}
-	xfs_acl_get_endian(acl);
-
-	/* If the file has an empty ACL return -1. */
-	if (acl->acl_cnt == XFS_ACL_NOT_PRESENT) {
-		_ACL_FREE(acl);
-		return -1;
-	}
-
-	/* Synchronize ACL with mode bits */
-	xfs_acl_sync_mode(ip->i_d.di_mode, acl);
-
-	rval = xfs_acl_access(ip->i_d.di_uid, ip->i_d.di_gid, acl, mode, cr);
-	_ACL_FREE(acl);
-	return rval;
-}
-
-STATIC int
-xfs_acl_allow_set(
-	struct inode	*vp,
-	int		kind)
-{
-	if (vp->i_flags & (S_IMMUTABLE|S_APPEND))
-		return EPERM;
-	if (kind == _ACL_TYPE_DEFAULT && !S_ISDIR(vp->i_mode))
-		return ENOTDIR;
-	if (vp->i_sb->s_flags & MS_RDONLY)
-		return EROFS;
-	if (XFS_I(vp)->i_d.di_uid != current_fsuid() && !capable(CAP_FOWNER))
-		return EPERM;
-	return 0;
-}
-
-/*
- * Note: cr is only used here for the capability check if the ACL test fails.
- *       It is not used to find out the credentials uid or groups etc, as was
- *       done in IRIX. It is assumed that the uid and groups for the current
- *       thread are taken from "current" instead of the cr parameter.
- */
-STATIC int
-xfs_acl_access(
-	uid_t		fuid,
-	gid_t		fgid,
-	xfs_acl_t	*fap,
-	mode_t		md,
-	cred_t		*cr)
-{
-	xfs_acl_entry_t	matched;
-	int		i, allows;
-	int		maskallows = -1;	/* true, but not 1, either */
-	int		seen_userobj = 0;
-
-	matched.ae_tag = 0;	/* Invalid type */
-	matched.ae_perm = 0;
-
-	for (i = 0; i < fap->acl_cnt; i++) {
-		/*
-		 * Break out if we've got a user_obj entry or
-		 * a user entry and the mask (and have processed USER_OBJ)
-		 */
-		if (matched.ae_tag == ACL_USER_OBJ)
-			break;
-		if (matched.ae_tag == ACL_USER) {
-			if (maskallows != -1 && seen_userobj)
-				break;
-			if (fap->acl_entry[i].ae_tag != ACL_MASK &&
-			    fap->acl_entry[i].ae_tag != ACL_USER_OBJ)
-				continue;
-		}
-		/* True if this entry allows the requested access */
-		allows = ((fap->acl_entry[i].ae_perm & md) == md);
-
-		switch (fap->acl_entry[i].ae_tag) {
-		case ACL_USER_OBJ:
-			seen_userobj = 1;
-			if (fuid != current_fsuid())
-				continue;
-			matched.ae_tag = ACL_USER_OBJ;
-			matched.ae_perm = allows;
-			break;
-		case ACL_USER:
-			if (fap->acl_entry[i].ae_id != current_fsuid())
-				continue;
-			matched.ae_tag = ACL_USER;
-			matched.ae_perm = allows;
-			break;
-		case ACL_GROUP_OBJ:
-			if ((matched.ae_tag == ACL_GROUP_OBJ ||
-			    matched.ae_tag == ACL_GROUP) && !allows)
-				continue;
-			if (!in_group_p(fgid))
-				continue;
-			matched.ae_tag = ACL_GROUP_OBJ;
-			matched.ae_perm = allows;
-			break;
-		case ACL_GROUP:
-			if ((matched.ae_tag == ACL_GROUP_OBJ ||
-			    matched.ae_tag == ACL_GROUP) && !allows)
-				continue;
-			if (!in_group_p(fap->acl_entry[i].ae_id))
-				continue;
-			matched.ae_tag = ACL_GROUP;
-			matched.ae_perm = allows;
-			break;
-		case ACL_MASK:
-			maskallows = allows;
-			break;
-		case ACL_OTHER:
-			if (matched.ae_tag != 0)
-				continue;
-			matched.ae_tag = ACL_OTHER;
-			matched.ae_perm = allows;
-			break;
-		}
-	}
-	/*
-	 * First possibility is that no matched entry allows access.
-	 * The capability to override DAC may exist, so check for it.
-	 */
-	switch (matched.ae_tag) {
-	case ACL_OTHER:
-	case ACL_USER_OBJ:
-		if (matched.ae_perm)
-			return 0;
-		break;
-	case ACL_USER:
-	case ACL_GROUP_OBJ:
-	case ACL_GROUP:
-		if (maskallows && matched.ae_perm)
-			return 0;
-		break;
-	case 0:
-		break;
-	}
-
-	/* EACCES tells generic_permission to check for capability overrides */
-	return EACCES;
-}
-
-/*
- * ACL validity checker.
- *   This acl validation routine checks each ACL entry read in makes sense.
- */
-STATIC int
-xfs_acl_invalid(
-	xfs_acl_t	*aclp)
-{
-	xfs_acl_entry_t	*entry, *e;
-	int		user = 0, group = 0, other = 0, mask = 0;
-	int		mask_required = 0;
-	int		i, j;
-
-	if (!aclp)
-		goto acl_invalid;
-
-	if (aclp->acl_cnt > XFS_ACL_MAX_ENTRIES)
-		goto acl_invalid;
-
-	for (i = 0; i < aclp->acl_cnt; i++) {
-		entry = &aclp->acl_entry[i];
-		switch (entry->ae_tag) {
-		case ACL_USER_OBJ:
-			if (user++)
-				goto acl_invalid;
-			break;
-		case ACL_GROUP_OBJ:
-			if (group++)
-				goto acl_invalid;
-			break;
-		case ACL_OTHER:
-			if (other++)
-				goto acl_invalid;
-			break;
-		case ACL_USER:
-		case ACL_GROUP:
-			for (j = i + 1; j < aclp->acl_cnt; j++) {
-				e = &aclp->acl_entry[j];
-				if (e->ae_id == entry->ae_id &&
-				    e->ae_tag == entry->ae_tag)
-					goto acl_invalid;
-			}
-			mask_required++;
-			break;
-		case ACL_MASK:
-			if (mask++)
-				goto acl_invalid;
-			break;
-		default:
-			goto acl_invalid;
-		}
-	}
-	if (!user || !group || !other || (mask_required && !mask))
-		goto acl_invalid;
-	else
-		return 0;
-acl_invalid:
-	return EINVAL;
-}
-
-/*
- * Do ACL endian conversion.
- */
-STATIC void
-xfs_acl_get_endian(
-	xfs_acl_t	*aclp)
-{
-	xfs_acl_entry_t	*ace, *end;
-
-	INT_SET(aclp->acl_cnt, ARCH_CONVERT, aclp->acl_cnt);
-	end = &aclp->acl_entry[0]+aclp->acl_cnt;
-	for (ace = &aclp->acl_entry[0]; ace < end; ace++) {
-		INT_SET(ace->ae_tag, ARCH_CONVERT, ace->ae_tag);
-		INT_SET(ace->ae_id, ARCH_CONVERT, ace->ae_id);
-		INT_SET(ace->ae_perm, ARCH_CONVERT, ace->ae_perm);
-	}
-}
-
-/*
- * Get the ACL from the EA and do endian conversion.
- */
-STATIC void
-xfs_acl_get_attr(
-	struct inode	*vp,
-	xfs_acl_t	*aclp,
-	int		kind,
-	int		flags,
-	int		*error)
-{
-	int		len = sizeof(xfs_acl_t);
-
-	ASSERT((flags & ATTR_KERNOVAL) ? (aclp == NULL) : 1);
-	flags |= ATTR_ROOT;
-	*error = xfs_attr_get(XFS_I(vp),
-					kind == _ACL_TYPE_ACCESS ?
-					SGI_ACL_FILE : SGI_ACL_DEFAULT,
-					(char *)aclp, &len, flags);
-	if (*error || (flags & ATTR_KERNOVAL))
-		return;
-	xfs_acl_get_endian(aclp);
-}
-
-/*
- * Set the EA with the ACL and do endian conversion.
- */
-STATIC void
-xfs_acl_set_attr(
-	struct inode	*vp,
-	xfs_acl_t	*aclp,
-	int		kind,
-	int		*error)
-{
-	xfs_acl_entry_t	*ace, *newace, *end;
-	xfs_acl_t	*newacl;
-	int		len;
-
-	if (!(_ACL_ALLOC(newacl))) {
-		*error = ENOMEM;
-		return;
-	}
-
-	len = sizeof(xfs_acl_t) -
-	      (sizeof(xfs_acl_entry_t) * (XFS_ACL_MAX_ENTRIES - aclp->acl_cnt));
-	end = &aclp->acl_entry[0]+aclp->acl_cnt;
-	for (ace = &aclp->acl_entry[0], newace = &newacl->acl_entry[0];
-	     ace < end;
-	     ace++, newace++) {
-		INT_SET(newace->ae_tag, ARCH_CONVERT, ace->ae_tag);
-		INT_SET(newace->ae_id, ARCH_CONVERT, ace->ae_id);
-		INT_SET(newace->ae_perm, ARCH_CONVERT, ace->ae_perm);
-	}
-	INT_SET(newacl->acl_cnt, ARCH_CONVERT, aclp->acl_cnt);
-	*error = xfs_attr_set(XFS_I(vp),
-				kind == _ACL_TYPE_ACCESS ?
-				SGI_ACL_FILE: SGI_ACL_DEFAULT,
-				(char *)newacl, len, ATTR_ROOT);
-	_ACL_FREE(newacl);
-}
-
-int
-xfs_acl_vtoacl(
-	struct inode	*vp,
-	xfs_acl_t	*access_acl,
-	xfs_acl_t	*default_acl)
-{
-	int		error = 0;
-
-	if (access_acl) {
-		/*
-		 * Get the Access ACL and the mode.  If either cannot
-		 * be obtained for some reason, invalidate the access ACL.
-		 */
-		xfs_acl_get_attr(vp, access_acl, _ACL_TYPE_ACCESS, 0, &error);
-		if (error)
-			access_acl->acl_cnt = XFS_ACL_NOT_PRESENT;
-		else /* We have a good ACL and the file mode, synchronize. */
-			xfs_acl_sync_mode(XFS_I(vp)->i_d.di_mode, access_acl);
-	}
-
-	if (default_acl) {
-		xfs_acl_get_attr(vp, default_acl, _ACL_TYPE_DEFAULT, 0, &error);
-		if (error)
-			default_acl->acl_cnt = XFS_ACL_NOT_PRESENT;
-	}
-	return error;
-}
-
-/*
- * This function retrieves the parent directory's acl, processes it
- * and lets the child inherit the acl(s) that it should.
- */
-int
-xfs_acl_inherit(
-	struct inode	*vp,
-	mode_t		mode,
-	xfs_acl_t	*pdaclp)
-{
-	xfs_acl_t	*cacl;
-	int		error = 0;
-	int		basicperms = 0;
-
-	/*
-	 * If the parent does not have a default ACL, or it's an
-	 * invalid ACL, we're done.
-	 */
-	if (!vp)
-		return 0;
-	if (!pdaclp || xfs_acl_invalid(pdaclp))
-		return 0;
-
-	/*
-	 * Copy the default ACL of the containing directory to
-	 * the access ACL of the new file and use the mode that
-	 * was passed in to set up the correct initial values for
-	 * the u::,g::[m::], and o:: entries.  This is what makes
-	 * umask() "work" with ACL's.
-	 */
-
-	if (!(_ACL_ALLOC(cacl)))
-		return ENOMEM;
-
-	memcpy(cacl, pdaclp, sizeof(xfs_acl_t));
-	xfs_acl_filter_mode(mode, cacl);
-	error = xfs_acl_setmode(vp, cacl, &basicperms);
-	if (error)
-		goto out_error;
-
-	/*
-	 * Set the Default and Access ACL on the file.  The mode is already
-	 * set on the file, so we don't need to worry about that.
-	 *
-	 * If the new file is a directory, its default ACL is a copy of
-	 * the containing directory's default ACL.
-	 */
-	if (S_ISDIR(vp->i_mode))
-		xfs_acl_set_attr(vp, pdaclp, _ACL_TYPE_DEFAULT, &error);
-	if (!error && !basicperms)
-		xfs_acl_set_attr(vp, cacl, _ACL_TYPE_ACCESS, &error);
-out_error:
-	_ACL_FREE(cacl);
-	return error;
-}
-
-/*
- * Set up the correct mode on the file based on the supplied ACL.  This
- * makes sure that the mode on the file reflects the state of the
- * u::,g::[m::], and o:: entries in the ACL.  Since the mode is where
- * the ACL is going to get the permissions for these entries, we must
- * synchronize the mode whenever we set the ACL on a file.
- */
-STATIC int
-xfs_acl_setmode(
-	struct inode	*vp,
-	xfs_acl_t	*acl,
-	int		*basicperms)
-{
-	struct iattr	iattr;
-	xfs_acl_entry_t	*ap;
-	xfs_acl_entry_t	*gap = NULL;
-	int		i, nomask = 1;
-
-	*basicperms = 1;
-
-	if (acl->acl_cnt == XFS_ACL_NOT_PRESENT)
-		return 0;
-
-	/*
-	 * Copy the u::, g::, o::, and m:: bits from the ACL into the
-	 * mode.  The m:: bits take precedence over the g:: bits.
-	 */
-	iattr.ia_valid = ATTR_MODE;
-	iattr.ia_mode = XFS_I(vp)->i_d.di_mode;
-	iattr.ia_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO);
-	ap = acl->acl_entry;
-	for (i = 0; i < acl->acl_cnt; ++i) {
-		switch (ap->ae_tag) {
-		case ACL_USER_OBJ:
-			iattr.ia_mode |= ap->ae_perm << 6;
-			break;
-		case ACL_GROUP_OBJ:
-			gap = ap;
-			break;
-		case ACL_MASK:	/* more than just standard modes */
-			nomask = 0;
-			iattr.ia_mode |= ap->ae_perm << 3;
-			*basicperms = 0;
-			break;
-		case ACL_OTHER:
-			iattr.ia_mode |= ap->ae_perm;
-			break;
-		default:	/* more than just standard modes */
-			*basicperms = 0;
-			break;
-		}
-		ap++;
-	}
-
-	/* Set the group bits from ACL_GROUP_OBJ if there's no ACL_MASK */
-	if (gap && nomask)
-		iattr.ia_mode |= gap->ae_perm << 3;
-
-	return xfs_setattr(XFS_I(vp), &iattr, 0);
-}
-
-/*
- * The permissions for the special ACL entries (u::, g::[m::], o::) are
- * actually stored in the file mode (if there is both a group and a mask,
- * the group is stored in the ACL entry and the mask is stored on the file).
- * This allows the mode to remain automatically in sync with the ACL without
- * the need for a call-back to the ACL system at every point where the mode
- * could change.  This function takes the permissions from the specified mode
- * and places it in the supplied ACL.
- *
- * This implementation draws its validity from the fact that, when the ACL
- * was assigned, the mode was copied from the ACL.
- * If the mode did not change, therefore, the mode remains exactly what was
- * taken from the special ACL entries at assignment.
- * If a subsequent chmod() was done, the POSIX spec says that the change in
- * mode must cause an update to the ACL seen at user level and used for
- * access checks.  Before and after a mode change, therefore, the file mode
- * most accurately reflects what the special ACL entries should permit/deny.
- *
- * CAVEAT: If someone sets the SGI_ACL_FILE attribute directly,
- *         the existing mode bits will override whatever is in the
- *         ACL. Similarly, if there is a pre-existing ACL that was
- *         never in sync with its mode (owing to a bug in 6.5 and
- *         before), it will now magically (or mystically) be
- *         synchronized.  This could cause slight astonishment, but
- *         it is better than inconsistent permissions.
- *
- * The supplied ACL is a template that may contain any combination
- * of special entries.  These are treated as place holders when we fill
- * out the ACL.  This routine does not add or remove special entries, it
- * simply unites each special entry with its associated set of permissions.
- */
-STATIC void
-xfs_acl_sync_mode(
-	mode_t		mode,
-	xfs_acl_t	*acl)
-{
-	int		i, nomask = 1;
-	xfs_acl_entry_t	*ap;
-	xfs_acl_entry_t	*gap = NULL;
-
-	/*
-	 * Set ACL entries. POSIX1003.1eD16 requires that the MASK
-	 * be set instead of the GROUP entry, if there is a MASK.
-	 */
-	for (ap = acl->acl_entry, i = 0; i < acl->acl_cnt; ap++, i++) {
-		switch (ap->ae_tag) {
-		case ACL_USER_OBJ:
-			ap->ae_perm = (mode >> 6) & 0x7;
-			break;
-		case ACL_GROUP_OBJ:
-			gap = ap;
-			break;
-		case ACL_MASK:
-			nomask = 0;
-			ap->ae_perm = (mode >> 3) & 0x7;
-			break;
-		case ACL_OTHER:
-			ap->ae_perm = mode & 0x7;
-			break;
-		default:
-			break;
-		}
-	}
-	/* Set the ACL_GROUP_OBJ if there's no ACL_MASK */
-	if (gap && nomask)
-		gap->ae_perm = (mode >> 3) & 0x7;
-}
-
-/*
- * When inheriting an Access ACL from a directory Default ACL,
- * the ACL bits are set to the intersection of the ACL default
- * permission bits and the file permission bits in mode. If there
- * are no permission bits on the file then we must not give them
- * the ACL. This is what what makes umask() work with ACLs.
- */
-STATIC void
-xfs_acl_filter_mode(
-	mode_t		mode,
-	xfs_acl_t	*acl)
-{
-	int		i, nomask = 1;
-	xfs_acl_entry_t	*ap;
-	xfs_acl_entry_t	*gap = NULL;
-
-	/*
-	 * Set ACL entries. POSIX1003.1eD16 requires that the MASK
-	 * be merged with GROUP entry, if there is a MASK.
-	 */
-	for (ap = acl->acl_entry, i = 0; i < acl->acl_cnt; ap++, i++) {
-		switch (ap->ae_tag) {
-		case ACL_USER_OBJ:
-			ap->ae_perm &= (mode >> 6) & 0x7;
-			break;
-		case ACL_GROUP_OBJ:
-			gap = ap;
-			break;
-		case ACL_MASK:
-			nomask = 0;
-			ap->ae_perm &= (mode >> 3) & 0x7;
-			break;
-		case ACL_OTHER:
-			ap->ae_perm &= mode & 0x7;
-			break;
-		default:
-			break;
-		}
-	}
-	/* Set the ACL_GROUP_OBJ if there's no ACL_MASK */
-	if (gap && nomask)
-		gap->ae_perm &= (mode >> 3) & 0x7;
-}
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index 642f1db4def..63dc1f2efad 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -18,81 +18,48 @@
 #ifndef __XFS_ACL_H__
 #define __XFS_ACL_H__
 
-/*
- * Access Control Lists
- */
-typedef __uint16_t	xfs_acl_perm_t;
-typedef __int32_t	xfs_acl_tag_t;
-typedef __int32_t	xfs_acl_id_t;
+struct inode;
+struct posix_acl;
+struct xfs_inode;
 
 #define XFS_ACL_MAX_ENTRIES 25
 #define XFS_ACL_NOT_PRESENT (-1)
 
-typedef struct xfs_acl_entry {
-	xfs_acl_tag_t	ae_tag;
-	xfs_acl_id_t	ae_id;
-	xfs_acl_perm_t	ae_perm;
-} xfs_acl_entry_t;
-
-typedef struct xfs_acl {
-	__int32_t	acl_cnt;
-	xfs_acl_entry_t	acl_entry[XFS_ACL_MAX_ENTRIES];
-} xfs_acl_t;
+/* On-disk XFS access control list structure */
+struct xfs_acl {
+	__be32		acl_cnt;
+	struct xfs_acl_entry {
+		__be32	ae_tag;
+		__be32	ae_id;
+		__be16	ae_perm;
+	} acl_entry[XFS_ACL_MAX_ENTRIES];
+};
 
 /* On-disk XFS extended attribute names */
-#define SGI_ACL_FILE	"SGI_ACL_FILE"
-#define SGI_ACL_DEFAULT	"SGI_ACL_DEFAULT"
+#define SGI_ACL_FILE		"SGI_ACL_FILE"
+#define SGI_ACL_DEFAULT		"SGI_ACL_DEFAULT"
 #define SGI_ACL_FILE_SIZE	(sizeof(SGI_ACL_FILE)-1)
 #define SGI_ACL_DEFAULT_SIZE	(sizeof(SGI_ACL_DEFAULT)-1)
 
-#define _ACL_TYPE_ACCESS	1
-#define _ACL_TYPE_DEFAULT	2
-
 #ifdef CONFIG_XFS_POSIX_ACL
+extern int xfs_check_acl(struct inode *inode, int mask);
+extern struct posix_acl *xfs_get_acl(struct inode *inode, int type);
+extern int xfs_inherit_acl(struct inode *inode, struct posix_acl *default_acl);
+extern int xfs_acl_chmod(struct inode *inode);
+extern void xfs_inode_init_acls(struct xfs_inode *ip);
+extern void xfs_inode_clear_acls(struct xfs_inode *ip);
+extern int posix_acl_access_exists(struct inode *inode);
+extern int posix_acl_default_exists(struct inode *inode);
 
-struct vattr;
-struct xfs_inode;
-
-extern struct kmem_zone *xfs_acl_zone;
-#define xfs_acl_zone_init(zone, name)	\
-		(zone) = kmem_zone_init(sizeof(xfs_acl_t), (name))
-#define xfs_acl_zone_destroy(zone)	kmem_zone_destroy(zone)
-
-extern int xfs_acl_inherit(struct inode *, mode_t mode, xfs_acl_t *);
-extern int xfs_acl_iaccess(struct xfs_inode *, mode_t, cred_t *);
-extern int xfs_acl_vtoacl(struct inode *, xfs_acl_t *, xfs_acl_t *);
-extern int xfs_acl_vhasacl_access(struct inode *);
-extern int xfs_acl_vhasacl_default(struct inode *);
-extern int xfs_acl_vset(struct inode *, void *, size_t, int);
-extern int xfs_acl_vget(struct inode *, void *, size_t, int);
-extern int xfs_acl_vremove(struct inode *, int);
-
-#define _ACL_PERM_INVALID(perm)	((perm) & ~(ACL_READ|ACL_WRITE|ACL_EXECUTE))
-
-#define _ACL_INHERIT(c,m,d)	(xfs_acl_inherit(c,m,d))
-#define _ACL_GET_ACCESS(pv,pa)	(xfs_acl_vtoacl(pv,pa,NULL) == 0)
-#define _ACL_GET_DEFAULT(pv,pd)	(xfs_acl_vtoacl(pv,NULL,pd) == 0)
-#define _ACL_ACCESS_EXISTS	xfs_acl_vhasacl_access
-#define _ACL_DEFAULT_EXISTS	xfs_acl_vhasacl_default
-
-#define _ACL_ALLOC(a)		((a) = kmem_zone_alloc(xfs_acl_zone, KM_SLEEP))
-#define _ACL_FREE(a)		((a)? kmem_zone_free(xfs_acl_zone, (a)):(void)0)
-
+extern struct xattr_handler xfs_xattr_system_handler;
 #else
-#define xfs_acl_zone_init(zone,name)
-#define xfs_acl_zone_destroy(zone)
-#define xfs_acl_vset(v,p,sz,t)	(-EOPNOTSUPP)
-#define xfs_acl_vget(v,p,sz,t)	(-EOPNOTSUPP)
-#define xfs_acl_vremove(v,t)	(-EOPNOTSUPP)
-#define xfs_acl_vhasacl_access(v)	(0)
-#define xfs_acl_vhasacl_default(v)	(0)
-#define _ACL_ALLOC(a)		(1)	/* successfully allocate nothing */
-#define _ACL_FREE(a)		((void)0)
-#define _ACL_INHERIT(c,m,d)	(0)
-#define _ACL_GET_ACCESS(pv,pa)	(0)
-#define _ACL_GET_DEFAULT(pv,pd)	(0)
-#define _ACL_ACCESS_EXISTS	(NULL)
-#define _ACL_DEFAULT_EXISTS	(NULL)
-#endif
-
+# define xfs_check_acl					NULL
+# define xfs_get_acl(inode, type)			NULL
+# define xfs_inherit_acl(inode, default_acl)		0
+# define xfs_acl_chmod(inode)				0
+# define xfs_inode_init_acls(ip)
+# define xfs_inode_clear_acls(ip)
+# define posix_acl_access_exists(inode)			0
+# define posix_acl_default_exists(inode)		0
+#endif /* CONFIG_XFS_POSIX_ACL */
 #endif	/* __XFS_ACL_H__ */
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index c8641f713ca..f24b50b68d0 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -212,6 +212,8 @@ typedef struct xfs_perag
 /*
  * tags for inode radix tree
  */
+#define XFS_ICI_NO_TAG		(-1)	/* special flag for an untagged lookup
+					   in xfs_inode_ag_iterator */
 #define XFS_ICI_RECLAIM_TAG	0	/* inode is to be reclaimed */
 
 #define	XFS_AG_MAXLEVELS(mp)		((mp)->m_ag_maxlevels)
diff --git a/fs/xfs/xfs_arch.h b/fs/xfs/xfs_arch.h
index 53d5e70d136..0902249354a 100644
--- a/fs/xfs/xfs_arch.h
+++ b/fs/xfs/xfs_arch.h
@@ -73,28 +73,6 @@ static inline void be64_add_cpu(__be64 *a, __s64 b)
 
 #endif	/* __KERNEL__ */
 
-/* do we need conversion? */
-#define ARCH_NOCONVERT 1
-#ifdef XFS_NATIVE_HOST
-# define ARCH_CONVERT	ARCH_NOCONVERT
-#else
-# define ARCH_CONVERT	0
-#endif
-
-/* generic swapping macros */
-
-#ifndef HAVE_SWABMACROS
-#define INT_SWAP16(type,var) ((typeof(type))(__swab16((__u16)(var))))
-#define INT_SWAP32(type,var) ((typeof(type))(__swab32((__u32)(var))))
-#define INT_SWAP64(type,var) ((typeof(type))(__swab64((__u64)(var))))
-#endif
-
-#define INT_SWAP(type, var) \
-    ((sizeof(type) == 8) ? INT_SWAP64(type,var) : \
-    ((sizeof(type) == 4) ? INT_SWAP32(type,var) : \
-    ((sizeof(type) == 2) ? INT_SWAP16(type,var) : \
-    (var))))
-
 /*
  * get and set integers from potentially unaligned locations
  */
@@ -107,16 +85,6 @@ static inline void be64_add_cpu(__be64 *a, __s64 b)
 	((__u8*)(pointer))[1] = (((value)     ) & 0xff); \
     }
 
-/* does not return a value */
-#define INT_SET(reference,arch,valueref) \
-    (__builtin_constant_p(valueref) ? \
-	(void)( (reference) = ( ((arch) != ARCH_NOCONVERT) ? (INT_SWAP((reference),(valueref))) : (valueref)) ) : \
-	(void)( \
-	    ((reference) = (valueref)), \
-	    ( ((arch) != ARCH_NOCONVERT) ? (reference) = INT_SWAP((reference),(reference)) : 0 ) \
-	) \
-    )
-
 /*
  * In directories inode numbers are stored as unaligned arrays of unsigned
  * 8bit integers on disk.
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index 5fde1654b43..db15feb906f 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -45,7 +45,6 @@
 #include "xfs_error.h"
 #include "xfs_quota.h"
 #include "xfs_trans_space.h"
-#include "xfs_acl.h"
 #include "xfs_rw.h"
 #include "xfs_vnodeops.h"
 
@@ -249,8 +248,9 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	/*
 	 * Attach the dquots to the inode.
 	 */
-	if ((error = XFS_QM_DQATTACH(mp, dp, 0)))
-		return (error);
+	error = xfs_qm_dqattach(dp, 0);
+	if (error)
+		return error;
 
 	/*
 	 * If the inode doesn't have an attribute fork, add one.
@@ -311,7 +311,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name,
 	}
 	xfs_ilock(dp, XFS_ILOCK_EXCL);
 
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, args.trans, dp, args.total, 0,
+	error = xfs_trans_reserve_quota_nblks(args.trans, dp, args.total, 0,
 				rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
 				       XFS_QMOPT_RES_REGBLKS);
 	if (error) {
@@ -501,8 +501,9 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags)
 	/*
 	 * Attach the dquots to the inode.
 	 */
-	if ((error = XFS_QM_DQATTACH(mp, dp, 0)))
-		return (error);
+	error = xfs_qm_dqattach(dp, 0);
+	if (error)
+		return error;
 
 	/*
 	 * Start our first transaction of the day.
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index ca7c6005a48..7928b9983c1 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -2691,7 +2691,7 @@ xfs_bmap_rtalloc(
 		 * Adjust the disk quota also. This was reserved
 		 * earlier.
 		 */
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, ap->tp, ap->ip,
+		xfs_trans_mod_dquot_byino(ap->tp, ap->ip,
 			ap->wasdel ? XFS_TRANS_DQ_DELRTBCOUNT :
 					XFS_TRANS_DQ_RTBCOUNT, (long) ralen);
 	} else {
@@ -2995,7 +2995,7 @@ xfs_bmap_btalloc(
 		 * Adjust the disk quota also. This was reserved
 		 * earlier.
 		 */
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, ap->tp, ap->ip,
+		xfs_trans_mod_dquot_byino(ap->tp, ap->ip,
 			ap->wasdel ? XFS_TRANS_DQ_DELBCOUNT :
 					XFS_TRANS_DQ_BCOUNT,
 			(long) args.len);
@@ -3066,7 +3066,7 @@ xfs_bmap_btree_to_extents(
 		return error;
 	xfs_bmap_add_free(cbno, 1, cur->bc_private.b.flist, mp);
 	ip->i_d.di_nblocks--;
-	XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
+	xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
 	xfs_trans_binval(tp, cbp);
 	if (cur->bc_bufs[0] == cbp)
 		cur->bc_bufs[0] = NULL;
@@ -3386,7 +3386,7 @@ xfs_bmap_del_extent(
 	 * Adjust quota data.
 	 */
 	if (qfield)
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, qfield, (long)-nblks);
+		xfs_trans_mod_dquot_byino(tp, ip, qfield, (long)-nblks);
 
 	/*
 	 * Account for change in delayed indirect blocks.
@@ -3523,7 +3523,7 @@ xfs_bmap_extents_to_btree(
 	*firstblock = cur->bc_private.b.firstblock = args.fsbno;
 	cur->bc_private.b.allocated++;
 	ip->i_d.di_nblocks++;
-	XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_BCOUNT, 1L);
+	xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, 1L);
 	abp = xfs_btree_get_bufl(mp, tp, args.fsbno, 0);
 	/*
 	 * Fill in the child block.
@@ -3690,7 +3690,7 @@ xfs_bmap_local_to_extents(
 		XFS_BMAP_TRACE_POST_UPDATE("new", ip, 0, whichfork);
 		XFS_IFORK_NEXT_SET(ip, whichfork, 1);
 		ip->i_d.di_nblocks = 1;
-		XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip,
+		xfs_trans_mod_dquot_byino(tp, ip,
 			XFS_TRANS_DQ_BCOUNT, 1L);
 		flags |= xfs_ilog_fext(whichfork);
 	} else {
@@ -4048,7 +4048,7 @@ xfs_bmap_add_attrfork(
 			XFS_TRANS_PERM_LOG_RES, XFS_ADDAFORK_LOG_COUNT)))
 		goto error0;
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip, blks, 0, rsvd ?
+	error = xfs_trans_reserve_quota_nblks(tp, ip, blks, 0, rsvd ?
 			XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES :
 			XFS_QMOPT_RES_REGBLKS);
 	if (error) {
@@ -4983,10 +4983,11 @@ xfs_bmapi(
 				 * adjusted later.  We return if we haven't
 				 * allocated blocks already inside this loop.
 				 */
-				if ((error = XFS_TRANS_RESERVE_QUOTA_NBLKS(
-						mp, NULL, ip, (long)alen, 0,
+				error = xfs_trans_reserve_quota_nblks(
+						NULL, ip, (long)alen, 0,
 						rt ? XFS_QMOPT_RES_RTBLKS :
-						     XFS_QMOPT_RES_REGBLKS))) {
+						     XFS_QMOPT_RES_REGBLKS);
+				if (error) {
 					if (n == 0) {
 						*nmap = 0;
 						ASSERT(cur == NULL);
@@ -5035,8 +5036,8 @@ xfs_bmapi(
 					if (XFS_IS_QUOTA_ON(mp))
 						/* unreserve the blocks now */
 						(void)
-						XFS_TRANS_UNRESERVE_QUOTA_NBLKS(
-							mp, NULL, ip,
+						xfs_trans_unreserve_quota_nblks(
+							NULL, ip,
 							(long)alen, 0, rt ?
 							XFS_QMOPT_RES_RTBLKS :
 							XFS_QMOPT_RES_REGBLKS);
@@ -5691,14 +5692,14 @@ xfs_bunmapi(
 				do_div(rtexts, mp->m_sb.sb_rextsize);
 				xfs_mod_incore_sb(mp, XFS_SBS_FREXTENTS,
 						(int64_t)rtexts, rsvd);
-				(void)XFS_TRANS_RESERVE_QUOTA_NBLKS(mp,
-					NULL, ip, -((long)del.br_blockcount), 0,
+				(void)xfs_trans_reserve_quota_nblks(NULL,
+					ip, -((long)del.br_blockcount), 0,
 					XFS_QMOPT_RES_RTBLKS);
 			} else {
 				xfs_mod_incore_sb(mp, XFS_SBS_FDBLOCKS,
 						(int64_t)del.br_blockcount, rsvd);
-				(void)XFS_TRANS_RESERVE_QUOTA_NBLKS(mp,
-					NULL, ip, -((long)del.br_blockcount), 0,
+				(void)xfs_trans_reserve_quota_nblks(NULL,
+					ip, -((long)del.br_blockcount), 0,
 					XFS_QMOPT_RES_REGBLKS);
 			}
 			ip->i_delayed_blks -= del.br_blockcount;
@@ -6085,6 +6086,7 @@ xfs_getbmap(
 			break;
 	}
 
+	kmem_free(out);
 	return error;
 }
 
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 0760d352586..5c1ade06578 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -590,7 +590,7 @@ xfs_bmbt_alloc_block(
 	cur->bc_private.b.allocated++;
 	cur->bc_private.b.ip->i_d.di_nblocks++;
 	xfs_trans_log_inode(args.tp, cur->bc_private.b.ip, XFS_ILOG_CORE);
-	XFS_TRANS_MOD_DQUOT_BYINO(args.mp, args.tp, cur->bc_private.b.ip,
+	xfs_trans_mod_dquot_byino(args.tp, cur->bc_private.b.ip,
 			XFS_TRANS_DQ_BCOUNT, 1L);
 
 	new->l = cpu_to_be64(args.fsbno);
@@ -618,7 +618,7 @@ xfs_bmbt_free_block(
 	ip->i_d.di_nblocks--;
 
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
+	xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, -1L);
 	xfs_trans_binval(tp, bp);
 	return 0;
 }
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index e6d839bddbf..7465f9ee125 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -347,13 +347,15 @@ xfs_swap_extents(
 
 	error = xfs_trans_commit(tp, XFS_TRANS_SWAPEXT);
 
-out_unlock:
-	xfs_iunlock(ip,  XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
 out:
 	kmem_free(tempifp);
 	return error;
 
+out_unlock:
+	xfs_iunlock(ip,  XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	goto out;
+
 out_trans_cancel:
 	xfs_trans_cancel(tp, 0);
 	goto out_unlock;
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 6c87c8f304e..edf8bdf4141 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -542,10 +542,8 @@ xfs_filestream_associate(
 	 * waiting for the lock because someone else is waiting on the lock we
 	 * hold and we cannot drop that as we are in a transaction here.
 	 *
-	 * Lucky for us, this inversion is rarely a problem because it's a
-	 * directory inode that we are trying to lock here and that means the
-	 * only place that matters is xfs_sync_inodes() and SYNC_DELWRI is
-	 * used. i.e. freeze, remount-ro, quotasync or unmount.
+	 * Lucky for us, this inversion is not a problem because it's a
+	 * directory inode that we are trying to lock here.
 	 *
 	 * So, if we can't get the iolock without sleeping then just give up
 	 */
diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h
index f7c06fac822..c4ea51b55dc 100644
--- a/fs/xfs/xfs_fs.h
+++ b/fs/xfs/xfs_fs.h
@@ -239,10 +239,13 @@ typedef struct xfs_fsop_resblks {
  * Minimum and maximum sizes need for growth checks
  */
 #define XFS_MIN_AG_BLOCKS	64
-#define XFS_MIN_LOG_BLOCKS	512
-#define XFS_MAX_LOG_BLOCKS	(64 * 1024)
-#define XFS_MIN_LOG_BYTES	(256 * 1024)
-#define XFS_MAX_LOG_BYTES	(128 * 1024 * 1024)
+#define XFS_MIN_LOG_BLOCKS	512ULL
+#define XFS_MAX_LOG_BLOCKS	(1024 * 1024ULL)
+#define XFS_MIN_LOG_BYTES	(10 * 1024 * 1024ULL)
+
+/* keep the maximum size under 2^31 by a small amount */
+#define XFS_MAX_LOG_BYTES \
+	((2 * 1024 * 1024 * 1024ULL) - XFS_MIN_LOG_BYTES)
 
 /*
  * Structures for XFS_IOC_FSGROWFSDATA, XFS_IOC_FSGROWFSLOG & XFS_IOC_FSGROWFSRT
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 8379e3bca26..cbd451bb484 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -160,7 +160,7 @@ xfs_growfs_data_private(
 	nagcount = new + (nb_mod != 0);
 	if (nb_mod && nb_mod < XFS_MIN_AG_BLOCKS) {
 		nagcount--;
-		nb = nagcount * mp->m_sb.sb_agblocks;
+		nb = (xfs_rfsblock_t)nagcount * mp->m_sb.sb_agblocks;
 		if (nb < mp->m_sb.sb_dblocks)
 			return XFS_ERROR(EINVAL);
 	}
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 89b81eedce6..76c540f719e 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -18,6 +18,7 @@
 #include "xfs.h"
 #include "xfs_fs.h"
 #include "xfs_types.h"
+#include "xfs_acl.h"
 #include "xfs_bit.h"
 #include "xfs_log.h"
 #include "xfs_inum.h"
@@ -82,6 +83,7 @@ xfs_inode_alloc(
 	memset(&ip->i_d, 0, sizeof(xfs_icdinode_t));
 	ip->i_size = 0;
 	ip->i_new_size = 0;
+	xfs_inode_init_acls(ip);
 
 	/*
 	 * Initialize inode's trace buffers.
@@ -500,10 +502,7 @@ xfs_ireclaim(
 	 * ilock one but will still hold the iolock.
 	 */
 	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	/*
-	 * Release dquots (and their references) if any.
-	 */
-	XFS_QM_DQDETACH(ip->i_mount, ip);
+	xfs_qm_dqdetach(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
 
 	switch (ip->i_d.di_mode & S_IFMT) {
@@ -561,6 +560,7 @@ xfs_ireclaim(
 	ASSERT(atomic_read(&ip->i_pincount) == 0);
 	ASSERT(!spin_is_locked(&ip->i_flags_lock));
 	ASSERT(completion_done(&ip->i_flush));
+	xfs_inode_clear_acls(ip);
 	kmem_zone_free(xfs_inode_zone, ip);
 }
 
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 123b20c8cbf..1f22d65fed0 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -49,7 +49,6 @@
 #include "xfs_utils.h"
 #include "xfs_dir2_trace.h"
 #include "xfs_quota.h"
-#include "xfs_acl.h"
 #include "xfs_filestream.h"
 #include "xfs_vnodeops.h"
 
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index f879c1bc4b9..77016702938 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -18,6 +18,7 @@
 #ifndef	__XFS_INODE_H__
 #define	__XFS_INODE_H__
 
+struct posix_acl;
 struct xfs_dinode;
 struct xfs_inode;
 
@@ -272,6 +273,11 @@ typedef struct xfs_inode {
 	/* VFS inode */
 	struct inode		i_vnode;	/* embedded VFS inode */
 
+#ifdef CONFIG_XFS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
 	/* Trace buffers per inode. */
 #ifdef XFS_INODE_TRACE
 	struct ktrace		*i_trace;	/* general inode trace */
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 5aaa2d7ec15..67ae5555a30 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -42,7 +42,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -385,7 +384,7 @@ xfs_iomap_write_direct(
 	 * Make sure that the dquots are there. This doesn't hold
 	 * the ilock across a disk read.
 	 */
-	error = XFS_QM_DQATTACH(ip->i_mount, ip, XFS_QMOPT_ILOCKED);
+	error = xfs_qm_dqattach_locked(ip, 0);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -444,8 +443,7 @@ xfs_iomap_write_direct(
 	if (error)
 		goto error_out;
 
-	error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip,
-					      qblocks, 0, quota_flag);
+	error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
 	if (error)
 		goto error1;
 
@@ -495,7 +493,7 @@ xfs_iomap_write_direct(
 
 error0:	/* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
 	xfs_bmap_cancel(&free_list);
-	XFS_TRANS_UNRESERVE_QUOTA_NBLKS(mp, tp, ip, qblocks, 0, quota_flag);
+	xfs_trans_unreserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
 
 error1:	/* Just cancel transaction */
 	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
@@ -582,7 +580,7 @@ xfs_iomap_write_delay(
 	 * Make sure that the dquots are there. This doesn't hold
 	 * the ilock across a disk read.
 	 */
-	error = XFS_QM_DQATTACH(mp, ip, XFS_QMOPT_ILOCKED);
+	error = xfs_qm_dqattach_locked(ip, 0);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -684,7 +682,8 @@ xfs_iomap_write_allocate(
 	/*
 	 * Make sure that the dquots are there.
 	 */
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return XFS_ERROR(error);
 
 	offset_fsb = XFS_B_TO_FSBT(mp, offset);
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 7ba450116d4..47da2fb4537 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1975,16 +1975,30 @@ xlog_recover_do_reg_buffer(
 		error = 0;
 		if (buf_f->blf_flags &
 		   (XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) {
+			if (item->ri_buf[i].i_addr == NULL) {
+				cmn_err(CE_ALERT,
+					"XFS: NULL dquot in %s.", __func__);
+				goto next;
+			}
+			if (item->ri_buf[i].i_len < sizeof(xfs_dqblk_t)) {
+				cmn_err(CE_ALERT,
+					"XFS: dquot too small (%d) in %s.",
+					item->ri_buf[i].i_len, __func__);
+				goto next;
+			}
 			error = xfs_qm_dqcheck((xfs_disk_dquot_t *)
 					       item->ri_buf[i].i_addr,
 					       -1, 0, XFS_QMOPT_DOWARN,
 					       "dquot_buf_recover");
+			if (error)
+				goto next;
 		}
-		if (!error)
-			memcpy(xfs_buf_offset(bp,
-				(uint)bit << XFS_BLI_SHIFT),	/* dest */
-				item->ri_buf[i].i_addr,		/* source */
-				nbits<<XFS_BLI_SHIFT);		/* length */
+
+		memcpy(xfs_buf_offset(bp,
+			(uint)bit << XFS_BLI_SHIFT),	/* dest */
+			item->ri_buf[i].i_addr,		/* source */
+			nbits<<XFS_BLI_SHIFT);		/* length */
+ next:
 		i++;
 		bit += nbits;
 	}
@@ -2615,7 +2629,19 @@ xlog_recover_do_dquot_trans(
 		return (0);
 
 	recddq = (xfs_disk_dquot_t *)item->ri_buf[1].i_addr;
-	ASSERT(recddq);
+
+	if (item->ri_buf[1].i_addr == NULL) {
+		cmn_err(CE_ALERT,
+			"XFS: NULL dquot in %s.", __func__);
+		return XFS_ERROR(EIO);
+	}
+	if (item->ri_buf[1].i_len < sizeof(xfs_dqblk_t)) {
+		cmn_err(CE_ALERT,
+			"XFS: dquot too small (%d) in %s.",
+			item->ri_buf[1].i_len, __func__);
+		return XFS_ERROR(EIO);
+	}
+
 	/*
 	 * This type of quotas was turned off, so ignore this record.
 	 */
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 65a99725d0c..5c6f092659c 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -960,6 +960,53 @@ xfs_check_sizes(xfs_mount_t *mp)
 }
 
 /*
+ * Clear the quotaflags in memory and in the superblock.
+ */
+int
+xfs_mount_reset_sbqflags(
+	struct xfs_mount	*mp)
+{
+	int			error;
+	struct xfs_trans	*tp;
+
+	mp->m_qflags = 0;
+
+	/*
+	 * It is OK to look at sb_qflags here in mount path,
+	 * without m_sb_lock.
+	 */
+	if (mp->m_sb.sb_qflags == 0)
+		return 0;
+	spin_lock(&mp->m_sb_lock);
+	mp->m_sb.sb_qflags = 0;
+	spin_unlock(&mp->m_sb_lock);
+
+	/*
+	 * If the fs is readonly, let the incore superblock run
+	 * with quotas off but don't flush the update out to disk
+	 */
+	if (mp->m_flags & XFS_MOUNT_RDONLY)
+		return 0;
+
+#ifdef QUOTADEBUG
+	xfs_fs_cmn_err(CE_NOTE, mp, "Writing superblock quota changes");
+#endif
+
+	tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SBCHANGE);
+	error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
+				      XFS_DEFAULT_LOG_COUNT);
+	if (error) {
+		xfs_trans_cancel(tp, 0);
+		xfs_fs_cmn_err(CE_ALERT, mp,
+			"xfs_mount_reset_sbqflags: Superblock update failed!");
+		return error;
+	}
+
+	xfs_mod_sb(tp, XFS_SB_QFLAGS);
+	return xfs_trans_commit(tp, 0);
+}
+
+/*
  * This function does the following on an initial mount of a file system:
  *	- reads the superblock from disk and init the mount struct
  *	- if we're a 32-bit kernel, do a size check on the superblock
@@ -976,7 +1023,8 @@ xfs_mountfs(
 	xfs_sb_t	*sbp = &(mp->m_sb);
 	xfs_inode_t	*rip;
 	__uint64_t	resblks;
-	uint		quotamount, quotaflags;
+	uint		quotamount = 0;
+	uint		quotaflags = 0;
 	int		error = 0;
 
 	xfs_mount_common(mp, sbp);
@@ -1210,9 +1258,28 @@ xfs_mountfs(
 	/*
 	 * Initialise the XFS quota management subsystem for this mount
 	 */
-	error = XFS_QM_INIT(mp, &quotamount, &quotaflags);
-	if (error)
-		goto out_rtunmount;
+	if (XFS_IS_QUOTA_RUNNING(mp)) {
+		error = xfs_qm_newmount(mp, &quotamount, &quotaflags);
+		if (error)
+			goto out_rtunmount;
+	} else {
+		ASSERT(!XFS_IS_QUOTA_ON(mp));
+
+		/*
+		 * If a file system had quotas running earlier, but decided to
+		 * mount without -o uquota/pquota/gquota options, revoke the
+		 * quotachecked license.
+		 */
+		if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
+			cmn_err(CE_NOTE,
+				"XFS: resetting qflags for filesystem %s",
+				mp->m_fsname);
+
+			error = xfs_mount_reset_sbqflags(mp);
+			if (error)
+				return error;
+		}
+	}
 
 	/*
 	 * Finish recovering the file system.  This part needed to be
@@ -1228,9 +1295,19 @@ xfs_mountfs(
 	/*
 	 * Complete the quota initialisation, post-log-replay component.
 	 */
-	error = XFS_QM_MOUNT(mp, quotamount, quotaflags);
-	if (error)
-		goto out_rtunmount;
+	if (quotamount) {
+		ASSERT(mp->m_qflags == 0);
+		mp->m_qflags = quotaflags;
+
+		xfs_qm_mount_quotas(mp);
+	}
+
+#if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
+	if (XFS_IS_QUOTA_ON(mp))
+		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas turned on");
+	else
+		xfs_fs_cmn_err(CE_NOTE, mp, "Disk quotas not turned on");
+#endif
 
 	/*
 	 * Now we are mounted, reserve a small amount of unused space for
@@ -1279,12 +1356,7 @@ xfs_unmountfs(
 	__uint64_t		resblks;
 	int			error;
 
-	/*
-	 * Release dquot that rootinode, rbmino and rsumino might be holding,
-	 * and release the quota inodes.
-	 */
-	XFS_QM_UNMOUNT(mp);
-
+	xfs_qm_unmount_quotas(mp);
 	xfs_rtunmount_inodes(mp);
 	IRELE(mp->m_rootip);
 
@@ -1299,12 +1371,9 @@ xfs_unmountfs(
 	 * need to force the log first.
 	 */
 	xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE | XFS_LOG_SYNC);
-	xfs_reclaim_inodes(mp, 0, XFS_IFLUSH_ASYNC);
-
-	XFS_QM_DQPURGEALL(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_UMOUNTING);
+	xfs_reclaim_inodes(mp, XFS_IFLUSH_ASYNC);
 
-	if (mp->m_quotainfo)
-		XFS_QM_DONE(mp);
+	xfs_qm_unmount(mp);
 
 	/*
 	 * Flush out the log synchronously so that we know for sure
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index d6a64392f98..a5122382afd 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -64,6 +64,8 @@ struct xfs_swapext;
 struct xfs_mru_cache;
 struct xfs_nameops;
 struct xfs_ail;
+struct xfs_quotainfo;
+
 
 /*
  * Prototypes and functions for the Data Migration subsystem.
@@ -107,86 +109,6 @@ typedef struct xfs_dmops {
 	(*(mp)->m_dm_ops->xfs_send_unmount)(mp,ip,right,mode,rval,fl)
 
 
-/*
- * Prototypes and functions for the Quota Management subsystem.
- */
-
-struct xfs_dquot;
-struct xfs_dqtrxops;
-struct xfs_quotainfo;
-
-typedef int	(*xfs_qminit_t)(struct xfs_mount *, uint *, uint *);
-typedef int	(*xfs_qmmount_t)(struct xfs_mount *, uint, uint);
-typedef void	(*xfs_qmunmount_t)(struct xfs_mount *);
-typedef void	(*xfs_qmdone_t)(struct xfs_mount *);
-typedef void	(*xfs_dqrele_t)(struct xfs_dquot *);
-typedef int	(*xfs_dqattach_t)(struct xfs_inode *, uint);
-typedef void	(*xfs_dqdetach_t)(struct xfs_inode *);
-typedef int	(*xfs_dqpurgeall_t)(struct xfs_mount *, uint);
-typedef int	(*xfs_dqvopalloc_t)(struct xfs_mount *,
-			struct xfs_inode *, uid_t, gid_t, prid_t, uint,
-			struct xfs_dquot **, struct xfs_dquot **);
-typedef void	(*xfs_dqvopcreate_t)(struct xfs_trans *, struct xfs_inode *,
-			struct xfs_dquot *, struct xfs_dquot *);
-typedef int	(*xfs_dqvoprename_t)(struct xfs_inode **);
-typedef struct xfs_dquot * (*xfs_dqvopchown_t)(
-			struct xfs_trans *, struct xfs_inode *,
-			struct xfs_dquot **, struct xfs_dquot *);
-typedef int	(*xfs_dqvopchownresv_t)(struct xfs_trans *, struct xfs_inode *,
-			struct xfs_dquot *, struct xfs_dquot *, uint);
-typedef void	(*xfs_dqstatvfs_t)(struct xfs_inode *, struct kstatfs *);
-typedef int	(*xfs_dqsync_t)(struct xfs_mount *, int flags);
-
-typedef struct xfs_qmops {
-	xfs_qminit_t		xfs_qminit;
-	xfs_qmdone_t		xfs_qmdone;
-	xfs_qmmount_t		xfs_qmmount;
-	xfs_qmunmount_t		xfs_qmunmount;
-	xfs_dqrele_t		xfs_dqrele;
-	xfs_dqattach_t		xfs_dqattach;
-	xfs_dqdetach_t		xfs_dqdetach;
-	xfs_dqpurgeall_t	xfs_dqpurgeall;
-	xfs_dqvopalloc_t	xfs_dqvopalloc;
-	xfs_dqvopcreate_t	xfs_dqvopcreate;
-	xfs_dqvoprename_t	xfs_dqvoprename;
-	xfs_dqvopchown_t	xfs_dqvopchown;
-	xfs_dqvopchownresv_t	xfs_dqvopchownresv;
-	xfs_dqstatvfs_t		xfs_dqstatvfs;
-	xfs_dqsync_t		xfs_dqsync;
-	struct xfs_dqtrxops	*xfs_dqtrxops;
-} xfs_qmops_t;
-
-#define XFS_QM_INIT(mp, mnt, fl) \
-	(*(mp)->m_qm_ops->xfs_qminit)(mp, mnt, fl)
-#define XFS_QM_MOUNT(mp, mnt, fl) \
-	(*(mp)->m_qm_ops->xfs_qmmount)(mp, mnt, fl)
-#define XFS_QM_UNMOUNT(mp) \
-	(*(mp)->m_qm_ops->xfs_qmunmount)(mp)
-#define XFS_QM_DONE(mp) \
-	(*(mp)->m_qm_ops->xfs_qmdone)(mp)
-#define XFS_QM_DQRELE(mp, dq) \
-	(*(mp)->m_qm_ops->xfs_dqrele)(dq)
-#define XFS_QM_DQATTACH(mp, ip, fl) \
-	(*(mp)->m_qm_ops->xfs_dqattach)(ip, fl)
-#define XFS_QM_DQDETACH(mp, ip) \
-	(*(mp)->m_qm_ops->xfs_dqdetach)(ip)
-#define XFS_QM_DQPURGEALL(mp, fl) \
-	(*(mp)->m_qm_ops->xfs_dqpurgeall)(mp, fl)
-#define XFS_QM_DQVOPALLOC(mp, ip, uid, gid, prid, fl, dq1, dq2) \
-	(*(mp)->m_qm_ops->xfs_dqvopalloc)(mp, ip, uid, gid, prid, fl, dq1, dq2)
-#define XFS_QM_DQVOPCREATE(mp, tp, ip, dq1, dq2) \
-	(*(mp)->m_qm_ops->xfs_dqvopcreate)(tp, ip, dq1, dq2)
-#define XFS_QM_DQVOPRENAME(mp, ip) \
-	(*(mp)->m_qm_ops->xfs_dqvoprename)(ip)
-#define XFS_QM_DQVOPCHOWN(mp, tp, ip, dqp, dq) \
-	(*(mp)->m_qm_ops->xfs_dqvopchown)(tp, ip, dqp, dq)
-#define XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, dq1, dq2, fl) \
-	(*(mp)->m_qm_ops->xfs_dqvopchownresv)(tp, ip, dq1, dq2, fl)
-#define XFS_QM_DQSTATVFS(ip, statp) \
-	(*(ip)->i_mount->m_qm_ops->xfs_dqstatvfs)(ip, statp)
-#define XFS_QM_DQSYNC(mp, flags) \
-	(*(mp)->m_qm_ops->xfs_dqsync)(mp, flags)
-
 #ifdef HAVE_PERCPU_SB
 
 /*
@@ -510,8 +432,6 @@ extern int	xfs_sb_validate_fsb_count(struct xfs_sb *, __uint64_t);
 
 extern int	xfs_dmops_get(struct xfs_mount *);
 extern void	xfs_dmops_put(struct xfs_mount *);
-extern int	xfs_qmops_get(struct xfs_mount *);
-extern void	xfs_qmops_put(struct xfs_mount *);
 
 extern struct xfs_dmops xfs_dmcore_xfs;
 
diff --git a/fs/xfs/xfs_qmops.c b/fs/xfs/xfs_qmops.c
deleted file mode 100644
index e101790ea8e..00000000000
--- a/fs/xfs/xfs_qmops.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_log.h"
-#include "xfs_inum.h"
-#include "xfs_trans.h"
-#include "xfs_sb.h"
-#include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
-#include "xfs_mount.h"
-#include "xfs_quota.h"
-#include "xfs_error.h"
-
-
-STATIC struct xfs_dquot *
-xfs_dqvopchown_default(
-	struct xfs_trans	*tp,
-	struct xfs_inode	*ip,
-	struct xfs_dquot	**dqp,
-	struct xfs_dquot	*dq)
-{
-	return NULL;
-}
-
-/*
- * Clear the quotaflags in memory and in the superblock.
- */
-int
-xfs_mount_reset_sbqflags(xfs_mount_t *mp)
-{
-	int			error;
-	xfs_trans_t		*tp;
-
-	mp->m_qflags = 0;
-	/*
-	 * It is OK to look at sb_qflags here in mount path,
-	 * without m_sb_lock.
-	 */
-	if (mp->m_sb.sb_qflags == 0)
-		return 0;
-	spin_lock(&mp->m_sb_lock);
-	mp->m_sb.sb_qflags = 0;
-	spin_unlock(&mp->m_sb_lock);
-
-	/*
-	 * if the fs is readonly, let the incore superblock run
-	 * with quotas off but don't flush the update out to disk
-	 */
-	if (mp->m_flags & XFS_MOUNT_RDONLY)
-		return 0;
-#ifdef QUOTADEBUG
-	xfs_fs_cmn_err(CE_NOTE, mp, "Writing superblock quota changes");
-#endif
-	tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SBCHANGE);
-	if ((error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
-				      XFS_DEFAULT_LOG_COUNT))) {
-		xfs_trans_cancel(tp, 0);
-		xfs_fs_cmn_err(CE_ALERT, mp,
-			"xfs_mount_reset_sbqflags: Superblock update failed!");
-		return error;
-	}
-	xfs_mod_sb(tp, XFS_SB_QFLAGS);
-	error = xfs_trans_commit(tp, 0);
-	return error;
-}
-
-STATIC int
-xfs_noquota_init(
-	xfs_mount_t	*mp,
-	uint		*needquotamount,
-	uint		*quotaflags)
-{
-	int		error = 0;
-
-	*quotaflags = 0;
-	*needquotamount = B_FALSE;
-
-	ASSERT(!XFS_IS_QUOTA_ON(mp));
-
-	/*
-	 * If a file system had quotas running earlier, but decided to
-	 * mount without -o uquota/pquota/gquota options, revoke the
-	 * quotachecked license.
-	 */
-	if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
-		cmn_err(CE_NOTE,
-                        "XFS resetting qflags for filesystem %s",
-                        mp->m_fsname);
-
-		error = xfs_mount_reset_sbqflags(mp);
-	}
-	return error;
-}
-
-static struct xfs_qmops xfs_qmcore_stub = {
-	.xfs_qminit		= (xfs_qminit_t) xfs_noquota_init,
-	.xfs_qmdone		= (xfs_qmdone_t) fs_noerr,
-	.xfs_qmmount		= (xfs_qmmount_t) fs_noerr,
-	.xfs_qmunmount		= (xfs_qmunmount_t) fs_noerr,
-	.xfs_dqrele		= (xfs_dqrele_t) fs_noerr,
-	.xfs_dqattach		= (xfs_dqattach_t) fs_noerr,
-	.xfs_dqdetach		= (xfs_dqdetach_t) fs_noerr,
-	.xfs_dqpurgeall		= (xfs_dqpurgeall_t) fs_noerr,
-	.xfs_dqvopalloc		= (xfs_dqvopalloc_t) fs_noerr,
-	.xfs_dqvopcreate	= (xfs_dqvopcreate_t) fs_noerr,
-	.xfs_dqvoprename	= (xfs_dqvoprename_t) fs_noerr,
-	.xfs_dqvopchown		= xfs_dqvopchown_default,
-	.xfs_dqvopchownresv	= (xfs_dqvopchownresv_t) fs_noerr,
-	.xfs_dqstatvfs		= (xfs_dqstatvfs_t) fs_noval,
-	.xfs_dqsync		= (xfs_dqsync_t) fs_noerr,
-};
-
-int
-xfs_qmops_get(struct xfs_mount *mp)
-{
-	if (XFS_IS_QUOTA_RUNNING(mp)) {
-#ifdef CONFIG_XFS_QUOTA
-		mp->m_qm_ops = &xfs_qmcore_xfs;
-#else
-		cmn_err(CE_WARN,
-			"XFS: qouta support not available in this kernel.");
-		return EINVAL;
-#endif
-	} else {
-		mp->m_qm_ops = &xfs_qmcore_stub;
-	}
-
-	return 0;
-}
-
-void
-xfs_qmops_put(struct xfs_mount *mp)
-{
-}
diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h
index f5d1202dde2..3ec91ac74c2 100644
--- a/fs/xfs/xfs_quota.h
+++ b/fs/xfs/xfs_quota.h
@@ -197,7 +197,6 @@ typedef struct xfs_qoff_logformat {
 #define XFS_QMOPT_UMOUNTING	0x0000100 /* filesys is being unmounted */
 #define XFS_QMOPT_DOLOG		0x0000200 /* log buf changes (in quotacheck) */
 #define XFS_QMOPT_DOWARN        0x0000400 /* increase warning cnt if needed */
-#define XFS_QMOPT_ILOCKED	0x0000800 /* inode is already locked (excl) */
 #define XFS_QMOPT_DQREPAIR	0x0001000 /* repair dquot if damaged */
 #define XFS_QMOPT_GQUOTA	0x0002000 /* group dquot requested */
 #define XFS_QMOPT_ENOSPC	0x0004000 /* enospc instead of edquot (prj) */
@@ -302,69 +301,79 @@ typedef struct xfs_dqtrx {
 	long		qt_delrtb_delta;  /* delayed RT blk count changes */
 } xfs_dqtrx_t;
 
-/*
- * Dquot transaction functions, used if quota is enabled.
- */
-typedef void	(*qo_dup_dqinfo_t)(struct xfs_trans *, struct xfs_trans *);
-typedef void	(*qo_mod_dquot_byino_t)(struct xfs_trans *,
-				struct xfs_inode *, uint, long);
-typedef void	(*qo_free_dqinfo_t)(struct xfs_trans *);
-typedef void	(*qo_apply_dquot_deltas_t)(struct xfs_trans *);
-typedef void	(*qo_unreserve_and_mod_dquots_t)(struct xfs_trans *);
-typedef int	(*qo_reserve_quota_nblks_t)(
-				struct xfs_trans *, struct xfs_mount *,
-				struct xfs_inode *, long, long, uint);
-typedef int	(*qo_reserve_quota_bydquots_t)(
-				struct xfs_trans *, struct xfs_mount *,
-				struct xfs_dquot *, struct xfs_dquot *,
-				long, long, uint);
-typedef struct xfs_dqtrxops {
-	qo_dup_dqinfo_t			qo_dup_dqinfo;
-	qo_free_dqinfo_t		qo_free_dqinfo;
-	qo_mod_dquot_byino_t		qo_mod_dquot_byino;
-	qo_apply_dquot_deltas_t		qo_apply_dquot_deltas;
-	qo_reserve_quota_nblks_t	qo_reserve_quota_nblks;
-	qo_reserve_quota_bydquots_t	qo_reserve_quota_bydquots;
-	qo_unreserve_and_mod_dquots_t	qo_unreserve_and_mod_dquots;
-} xfs_dqtrxops_t;
-
-#define XFS_DQTRXOP(mp, tp, op, args...) \
-		((mp)->m_qm_ops->xfs_dqtrxops ? \
-		((mp)->m_qm_ops->xfs_dqtrxops->op)(tp, ## args) : 0)
-
-#define XFS_DQTRXOP_VOID(mp, tp, op, args...) \
-		((mp)->m_qm_ops->xfs_dqtrxops ? \
-		((mp)->m_qm_ops->xfs_dqtrxops->op)(tp, ## args) : (void)0)
-
-#define XFS_TRANS_DUP_DQINFO(mp, otp, ntp) \
-	XFS_DQTRXOP_VOID(mp, otp, qo_dup_dqinfo, ntp)
-#define XFS_TRANS_FREE_DQINFO(mp, tp) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_free_dqinfo)
-#define XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, field, delta) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_mod_dquot_byino, ip, field, delta)
-#define XFS_TRANS_APPLY_DQUOT_DELTAS(mp, tp) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_apply_dquot_deltas)
-#define XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip, nblks, ninos, fl) \
-	XFS_DQTRXOP(mp, tp, qo_reserve_quota_nblks, mp, ip, nblks, ninos, fl)
-#define XFS_TRANS_RESERVE_QUOTA_BYDQUOTS(mp, tp, ud, gd, nb, ni, fl) \
-	XFS_DQTRXOP(mp, tp, qo_reserve_quota_bydquots, mp, ud, gd, nb, ni, fl)
-#define XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(mp, tp) \
-	XFS_DQTRXOP_VOID(mp, tp, qo_unreserve_and_mod_dquots)
-
-#define XFS_TRANS_UNRESERVE_QUOTA_NBLKS(mp, tp, ip, nblks, ninos, flags) \
-	XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip, -(nblks), -(ninos), flags)
-#define XFS_TRANS_RESERVE_QUOTA(mp, tp, ud, gd, nb, ni, f) \
-	XFS_TRANS_RESERVE_QUOTA_BYDQUOTS(mp, tp, ud, gd, nb, ni, \
-				f | XFS_QMOPT_RES_REGBLKS)
-#define XFS_TRANS_UNRESERVE_QUOTA(mp, tp, ud, gd, nb, ni, f) \
-	XFS_TRANS_RESERVE_QUOTA_BYDQUOTS(mp, tp, ud, gd, -(nb), -(ni), \
+#ifdef CONFIG_XFS_QUOTA
+extern void xfs_trans_dup_dqinfo(struct xfs_trans *, struct xfs_trans *);
+extern void xfs_trans_free_dqinfo(struct xfs_trans *);
+extern void xfs_trans_mod_dquot_byino(struct xfs_trans *, struct xfs_inode *,
+		uint, long);
+extern void xfs_trans_apply_dquot_deltas(struct xfs_trans *);
+extern void xfs_trans_unreserve_and_mod_dquots(struct xfs_trans *);
+extern int xfs_trans_reserve_quota_nblks(struct xfs_trans *,
+		struct xfs_inode *, long, long, uint);
+extern int xfs_trans_reserve_quota_bydquots(struct xfs_trans *,
+		struct xfs_mount *, struct xfs_dquot *,
+		struct xfs_dquot *, long, long, uint);
+
+extern int xfs_qm_vop_dqalloc(struct xfs_inode *, uid_t, gid_t, prid_t, uint,
+		struct xfs_dquot **, struct xfs_dquot **);
+extern void xfs_qm_vop_create_dqattach(struct xfs_trans *, struct xfs_inode *,
+		struct xfs_dquot *, struct xfs_dquot *);
+extern int xfs_qm_vop_rename_dqattach(struct xfs_inode **);
+extern struct xfs_dquot *xfs_qm_vop_chown(struct xfs_trans *,
+		struct xfs_inode *, struct xfs_dquot **, struct xfs_dquot *);
+extern int xfs_qm_vop_chown_reserve(struct xfs_trans *, struct xfs_inode *,
+		struct xfs_dquot *, struct xfs_dquot *, uint);
+extern int xfs_qm_dqattach(struct xfs_inode *, uint);
+extern int xfs_qm_dqattach_locked(struct xfs_inode *, uint);
+extern void xfs_qm_dqdetach(struct xfs_inode *);
+extern void xfs_qm_dqrele(struct xfs_dquot *);
+extern void xfs_qm_statvfs(struct xfs_inode *, struct kstatfs *);
+extern int xfs_qm_sync(struct xfs_mount *, int);
+extern int xfs_qm_newmount(struct xfs_mount *, uint *, uint *);
+extern void xfs_qm_mount_quotas(struct xfs_mount *);
+extern void xfs_qm_unmount(struct xfs_mount *);
+extern void xfs_qm_unmount_quotas(struct xfs_mount *);
+
+#else
+static inline int
+xfs_qm_vop_dqalloc(struct xfs_inode *ip, uid_t uid, gid_t gid, prid_t prid,
+		uint flags, struct xfs_dquot **udqp, struct xfs_dquot **gdqp)
+{
+	*udqp = NULL;
+	*gdqp = NULL;
+	return 0;
+}
+#define xfs_trans_dup_dqinfo(tp, tp2)
+#define xfs_trans_free_dqinfo(tp)
+#define xfs_trans_mod_dquot_byino(tp, ip, fields, delta)
+#define xfs_trans_apply_dquot_deltas(tp)
+#define xfs_trans_unreserve_and_mod_dquots(tp)
+#define xfs_trans_reserve_quota_nblks(tp, ip, nblks, ninos, flags)	(0)
+#define xfs_trans_reserve_quota_bydquots(tp, mp, u, g, nb, ni, fl)	(0)
+#define xfs_qm_vop_create_dqattach(tp, ip, u, g)
+#define xfs_qm_vop_rename_dqattach(it)					(0)
+#define xfs_qm_vop_chown(tp, ip, old, new)				(NULL)
+#define xfs_qm_vop_chown_reserve(tp, ip, u, g, fl)			(0)
+#define xfs_qm_dqattach(ip, fl)						(0)
+#define xfs_qm_dqattach_locked(ip, fl)					(0)
+#define xfs_qm_dqdetach(ip)
+#define xfs_qm_dqrele(d)
+#define xfs_qm_statvfs(ip, s)
+#define xfs_qm_sync(mp, fl)						(0)
+#define xfs_qm_newmount(mp, a, b)					(0)
+#define xfs_qm_mount_quotas(mp)
+#define xfs_qm_unmount(mp)
+#define xfs_qm_unmount_quotas(mp)					(0)
+#endif /* CONFIG_XFS_QUOTA */
+
+#define xfs_trans_unreserve_quota_nblks(tp, ip, nblks, ninos, flags) \
+	xfs_trans_reserve_quota_nblks(tp, ip, -(nblks), -(ninos), flags)
+#define xfs_trans_reserve_quota(tp, mp, ud, gd, nb, ni, f) \
+	xfs_trans_reserve_quota_bydquots(tp, mp, ud, gd, nb, ni, \
 				f | XFS_QMOPT_RES_REGBLKS)
 
 extern int xfs_qm_dqcheck(xfs_disk_dquot_t *, xfs_dqid_t, uint, uint, char *);
 extern int xfs_mount_reset_sbqflags(struct xfs_mount *);
 
-extern struct xfs_qmops xfs_qmcore_xfs;
-
 #endif	/* __KERNEL__ */
-
 #endif	/* __XFS_QUOTA_H__ */
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 58f85e9cd11..b81deea0ce1 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -166,7 +166,8 @@ xfs_rename(
 	/*
 	 * Attach the dquots to the inodes
 	 */
-	if ((error = XFS_QM_DQVOPRENAME(mp, inodes))) {
+	error = xfs_qm_vop_rename_dqattach(inodes);
+	if (error) {
 		xfs_trans_cancel(tp, cancel_flags);
 		goto std_return;
 	}
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index 36f3a21c54d..fea68615ed2 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -41,7 +41,6 @@
 #include "xfs_ialloc.h"
 #include "xfs_attr.h"
 #include "xfs_bmap.h"
-#include "xfs_acl.h"
 #include "xfs_error.h"
 #include "xfs_buf_item.h"
 #include "xfs_rw.h"
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 8570b826fed..66b849358e6 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -297,7 +297,7 @@ xfs_trans_dup(
 	tp->t_rtx_res = tp->t_rtx_res_used;
 	ntp->t_pflags = tp->t_pflags;
 
-	XFS_TRANS_DUP_DQINFO(tp->t_mountp, tp, ntp);
+	xfs_trans_dup_dqinfo(tp, ntp);
 
 	atomic_inc(&tp->t_mountp->m_active_trans);
 	return ntp;
@@ -628,8 +628,6 @@ xfs_trans_apply_sb_deltas(
 		xfs_trans_log_buf(tp, bp, offsetof(xfs_dsb_t, sb_icount),
 				  offsetof(xfs_dsb_t, sb_frextents) +
 				  sizeof(sbp->sb_frextents) - 1);
-
-	tp->t_mountp->m_super->s_dirt = 1;
 }
 
 /*
@@ -831,7 +829,7 @@ shut_us_down:
 		 * means is that we have some (non-persistent) quota
 		 * reservations that need to be unreserved.
 		 */
-		XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(mp, tp);
+		xfs_trans_unreserve_and_mod_dquots(tp);
 		if (tp->t_ticket) {
 			commit_lsn = xfs_log_done(mp, tp->t_ticket,
 							NULL, log_flags);
@@ -850,10 +848,9 @@ shut_us_down:
 	/*
 	 * If we need to update the superblock, then do it now.
 	 */
-	if (tp->t_flags & XFS_TRANS_SB_DIRTY) {
+	if (tp->t_flags & XFS_TRANS_SB_DIRTY)
 		xfs_trans_apply_sb_deltas(tp);
-	}
-	XFS_TRANS_APPLY_DQUOT_DELTAS(mp, tp);
+	xfs_trans_apply_dquot_deltas(tp);
 
 	/*
 	 * Ask each log item how many log_vector entries it will
@@ -1058,7 +1055,7 @@ xfs_trans_uncommit(
 	}
 
 	xfs_trans_unreserve_and_mod_sb(tp);
-	XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(tp->t_mountp, tp);
+	xfs_trans_unreserve_and_mod_dquots(tp);
 
 	xfs_trans_free_items(tp, flags);
 	xfs_trans_free_busy(tp);
@@ -1183,7 +1180,7 @@ xfs_trans_cancel(
 	}
 #endif
 	xfs_trans_unreserve_and_mod_sb(tp);
-	XFS_TRANS_UNRESERVE_AND_MOD_DQUOTS(mp, tp);
+	xfs_trans_unreserve_and_mod_dquots(tp);
 
 	if (tp->t_ticket) {
 		if (flags & XFS_TRANS_RELEASE_LOG_RES) {
@@ -1213,7 +1210,7 @@ xfs_trans_free(
 	xfs_trans_t	*tp)
 {
 	atomic_dec(&tp->t_mountp->m_active_trans);
-	XFS_TRANS_FREE_DQINFO(tp->t_mountp, tp);
+	xfs_trans_free_dqinfo(tp);
 	kmem_zone_free(xfs_trans_zone, tp);
 }
 
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 79b9e5ea535..4d88616bde9 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -166,7 +166,7 @@ xfs_dir_ialloc(
 			xfs_buf_relse(ialloc_context);
 			if (dqinfo) {
 				tp->t_dqinfo = dqinfo;
-				XFS_TRANS_FREE_DQINFO(tp->t_mountp, tp);
+				xfs_trans_free_dqinfo(tp);
 			}
 			*tpp = ntp;
 			*ipp = NULL;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 19cf90a9c76..c4eca5ed5da 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -42,6 +42,7 @@
 #include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_bmap.h"
+#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_rw.h"
 #include "xfs_error.h"
@@ -118,7 +119,7 @@ xfs_setattr(
 		 */
 		ASSERT(udqp == NULL);
 		ASSERT(gdqp == NULL);
-		code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, ip->i_d.di_projid,
+		code = xfs_qm_vop_dqalloc(ip, uid, gid, ip->i_d.di_projid,
 					 qflags, &udqp, &gdqp);
 		if (code)
 			return code;
@@ -180,10 +181,11 @@ xfs_setattr(
 		 * Do a quota reservation only if uid/gid is actually
 		 * going to change.
 		 */
-		if ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) ||
-		    (XFS_IS_GQUOTA_ON(mp) && igid != gid)) {
+		if (XFS_IS_QUOTA_RUNNING(mp) &&
+		    ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) ||
+		     (XFS_IS_GQUOTA_ON(mp) && igid != gid))) {
 			ASSERT(tp);
-			code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp,
+			code = xfs_qm_vop_chown_reserve(tp, ip, udqp, gdqp,
 						capable(CAP_FOWNER) ?
 						XFS_QMOPT_FORCE_RES : 0);
 			if (code)	/* out of quota */
@@ -217,7 +219,7 @@ xfs_setattr(
 		/*
 		 * Make sure that the dquots are attached to the inode.
 		 */
-		code = XFS_QM_DQATTACH(mp, ip, XFS_QMOPT_ILOCKED);
+		code = xfs_qm_dqattach_locked(ip, 0);
 		if (code)
 			goto error_return;
 
@@ -351,21 +353,21 @@ xfs_setattr(
 		 * in the transaction.
 		 */
 		if (iuid != uid) {
-			if (XFS_IS_UQUOTA_ON(mp)) {
+			if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_UQUOTA_ON(mp)) {
 				ASSERT(mask & ATTR_UID);
 				ASSERT(udqp);
-				olddquot1 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+				olddquot1 = xfs_qm_vop_chown(tp, ip,
 							&ip->i_udquot, udqp);
 			}
 			ip->i_d.di_uid = uid;
 			inode->i_uid = uid;
 		}
 		if (igid != gid) {
-			if (XFS_IS_GQUOTA_ON(mp)) {
+			if (XFS_IS_QUOTA_RUNNING(mp) && XFS_IS_GQUOTA_ON(mp)) {
 				ASSERT(!XFS_IS_PQUOTA_ON(mp));
 				ASSERT(mask & ATTR_GID);
 				ASSERT(gdqp);
-				olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip,
+				olddquot2 = xfs_qm_vop_chown(tp, ip,
 							&ip->i_gdquot, gdqp);
 			}
 			ip->i_d.di_gid = gid;
@@ -461,13 +463,25 @@ xfs_setattr(
 	/*
 	 * Release any dquot(s) the inode had kept before chown.
 	 */
-	XFS_QM_DQRELE(mp, olddquot1);
-	XFS_QM_DQRELE(mp, olddquot2);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(olddquot1);
+	xfs_qm_dqrele(olddquot2);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
-	if (code) {
+	if (code)
 		return code;
+
+	/*
+	 * XXX(hch): Updating the ACL entries is not atomic vs the i_mode
+	 * 	     update.  We could avoid this with linked transactions
+	 * 	     and passing down the transaction pointer all the way
+	 *	     to attr_set.  No previous user of the generic
+	 * 	     Posix ACL code seems to care about this issue either.
+	 */
+	if ((mask & ATTR_MODE) && !(flags & XFS_ATTR_NOACL)) {
+		code = -xfs_acl_chmod(inode);
+		if (code)
+			return XFS_ERROR(code);
 	}
 
 	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
@@ -482,8 +496,8 @@ xfs_setattr(
 	commit_flags |= XFS_TRANS_ABORT;
 	/* FALLTHROUGH */
  error_return:
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 	if (tp) {
 		xfs_trans_cancel(tp, commit_flags);
 	}
@@ -739,7 +753,8 @@ xfs_free_eofblocks(
 		/*
 		 * Attach the dquots to the inode up front.
 		 */
-		if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+		error = xfs_qm_dqattach(ip, 0);
+		if (error)
 			return error;
 
 		/*
@@ -1181,7 +1196,8 @@ xfs_inactive(
 
 	ASSERT(ip->i_d.di_nlink == 0);
 
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return VN_INACTIVE_CACHE;
 
 	tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
@@ -1307,7 +1323,7 @@ xfs_inactive(
 		/*
 		 * Credit the quota account(s). The inode is gone.
 		 */
-		XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_ICOUNT, -1);
+		xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_ICOUNT, -1);
 
 		/*
 		 * Just ignore errors at this point.  There is nothing we can
@@ -1323,11 +1339,11 @@ xfs_inactive(
 			xfs_fs_cmn_err(CE_NOTE, mp, "xfs_inactive: "
 				"xfs_trans_commit() returned error %d", error);
 	}
+
 	/*
 	 * Release the dquots held by inode, if any.
 	 */
-	XFS_QM_DQDETACH(mp, ip);
-
+	xfs_qm_dqdetach(ip);
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
 
  out:
@@ -1427,8 +1443,7 @@ xfs_create(
 	/*
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
-	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(), current_fsgid(), prid,
+	error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -1489,7 +1504,7 @@ xfs_create(
 	/*
 	 * Reserve disk quota and the inode.
 	 */
-	error = XFS_TRANS_RESERVE_QUOTA(mp, tp, udqp, gdqp, resblks, 1, 0);
+	error = xfs_trans_reserve_quota(tp, mp, udqp, gdqp, resblks, 1, 0);
 	if (error)
 		goto out_trans_cancel;
 
@@ -1561,7 +1576,7 @@ xfs_create(
 	 * These ids of the inode couldn't have changed since the new
 	 * inode has been locked ever since it was created.
 	 */
-	XFS_QM_DQVOPCREATE(mp, tp, ip, udqp, gdqp);
+	xfs_qm_vop_create_dqattach(tp, ip, udqp, gdqp);
 
 	/*
 	 * xfs_trans_commit normally decrements the vnode ref count
@@ -1580,8 +1595,8 @@ xfs_create(
 		goto out_dqrele;
 	}
 
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	*ipp = ip;
 
@@ -1602,8 +1617,8 @@ xfs_create(
  out_trans_cancel:
 	xfs_trans_cancel(tp, cancel_flags);
  out_dqrele:
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
@@ -1837,11 +1852,11 @@ xfs_remove(
 			return error;
 	}
 
-	error = XFS_QM_DQATTACH(mp, dp, 0);
+	error = xfs_qm_dqattach(dp, 0);
 	if (error)
 		goto std_return;
 
-	error = XFS_QM_DQATTACH(mp, ip, 0);
+	error = xfs_qm_dqattach(ip, 0);
 	if (error)
 		goto std_return;
 
@@ -2028,11 +2043,11 @@ xfs_link(
 
 	/* Return through std_return after this point. */
 
-	error = XFS_QM_DQATTACH(mp, sip, 0);
+	error = xfs_qm_dqattach(sip, 0);
 	if (error)
 		goto std_return;
 
-	error = XFS_QM_DQATTACH(mp, tdp, 0);
+	error = xfs_qm_dqattach(tdp, 0);
 	if (error)
 		goto std_return;
 
@@ -2205,8 +2220,7 @@ xfs_symlink(
 	/*
 	 * Make sure that we have allocated dquot(s) on disk.
 	 */
-	error = XFS_QM_DQVOPALLOC(mp, dp,
-			current_fsuid(), current_fsgid(), prid,
+	error = xfs_qm_vop_dqalloc(dp, current_fsuid(), current_fsgid(), prid,
 			XFS_QMOPT_QUOTALL | XFS_QMOPT_INHERIT, &udqp, &gdqp);
 	if (error)
 		goto std_return;
@@ -2248,7 +2262,7 @@ xfs_symlink(
 	/*
 	 * Reserve disk quota : blocks and inode.
 	 */
-	error = XFS_TRANS_RESERVE_QUOTA(mp, tp, udqp, gdqp, resblks, 1, 0);
+	error = xfs_trans_reserve_quota(tp, mp, udqp, gdqp, resblks, 1, 0);
 	if (error)
 		goto error_return;
 
@@ -2288,7 +2302,7 @@ xfs_symlink(
 	/*
 	 * Also attach the dquot(s) to it, if applicable.
 	 */
-	XFS_QM_DQVOPCREATE(mp, tp, ip, udqp, gdqp);
+	xfs_qm_vop_create_dqattach(tp, ip, udqp, gdqp);
 
 	if (resblks)
 		resblks -= XFS_IALLOC_SPACE_RES(mp);
@@ -2376,8 +2390,8 @@ xfs_symlink(
 		goto error2;
 	}
 	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	/* Fall through to std_return with error = 0 or errno from
 	 * xfs_trans_commit	*/
@@ -2401,8 +2415,8 @@ std_return:
 	cancel_flags |= XFS_TRANS_ABORT;
  error_return:
 	xfs_trans_cancel(tp, cancel_flags);
-	XFS_QM_DQRELE(mp, udqp);
-	XFS_QM_DQRELE(mp, gdqp);
+	xfs_qm_dqrele(udqp);
+	xfs_qm_dqrele(gdqp);
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
@@ -2541,7 +2555,8 @@ xfs_alloc_file_space(
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return error;
 
 	if (len <= 0)
@@ -2628,8 +2643,8 @@ retry:
 			break;
 		}
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		error = XFS_TRANS_RESERVE_QUOTA_NBLKS(mp, tp, ip,
-						      qblocks, 0, quota_flag);
+		error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks,
+						      0, quota_flag);
 		if (error)
 			goto error1;
 
@@ -2688,7 +2703,7 @@ dmapi_enospc_check:
 
 error0:	/* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
 	xfs_bmap_cancel(&free_list);
-	XFS_TRANS_UNRESERVE_QUOTA_NBLKS(mp, tp, ip, qblocks, 0, quota_flag);
+	xfs_trans_unreserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
 
 error1:	/* Just cancel transaction */
 	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
@@ -2827,7 +2842,8 @@ xfs_free_file_space(
 
 	xfs_itrace_entry(ip);
 
-	if ((error = XFS_QM_DQATTACH(mp, ip, 0)))
+	error = xfs_qm_dqattach(ip, 0);
+	if (error)
 		return error;
 
 	error = 0;
@@ -2953,9 +2969,9 @@ xfs_free_file_space(
 			break;
 		}
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		error = XFS_TRANS_RESERVE_QUOTA(mp, tp,
-				ip->i_udquot, ip->i_gdquot, resblks, 0,
-				XFS_QMOPT_RES_REGBLKS);
+		error = xfs_trans_reserve_quota(tp, mp,
+				ip->i_udquot, ip->i_gdquot,
+				resblks, 0, XFS_QMOPT_RES_REGBLKS);
 		if (error)
 			goto error1;
 
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 04373c6c61f..a9e102de71a 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -18,6 +18,7 @@ int xfs_setattr(struct xfs_inode *ip, struct iattr *vap, int flags);
 #define	XFS_ATTR_DMI		0x01	/* invocation from a DMI function */
 #define	XFS_ATTR_NONBLOCK	0x02	/* return EAGAIN if operation would block */
 #define XFS_ATTR_NOLOCK		0x04	/* Don't grab any conflicting locks */
+#define XFS_ATTR_NOACL		0x08	/* Don't call xfs_acl_chmod */
 
 int xfs_readlink(struct xfs_inode *ip, char *link);
 int xfs_fsync(struct xfs_inode *ip);
diff --git a/include/Kbuild b/include/Kbuild
index d8c3e3cbf41..fe36accd432 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -8,3 +8,4 @@ header-y += mtd/
 header-y += rdma/
 header-y += video/
 header-y += drm/
+header-y += xen/
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
index 4c9932a2503..eb62334cda2 100644
--- a/include/asm-generic/Kbuild
+++ b/include/asm-generic/Kbuild
@@ -1,11 +1,33 @@
+header-y += auxvec.h
+header-y += bitsperlong.h
 header-y += errno-base.h
 header-y += errno.h
 header-y += fcntl.h
 header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman-common.h
 header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
 header-y += poll.h
+header-y += posix_types.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += shmparam.h
+header-y += signal-defs.h
 header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
 header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
 
 unifdef-y += int-l64.h
 unifdef-y += int-ll64.h
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 70d185534b9..290910e4ede 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -9,6 +9,7 @@ unifdef-y += a.out.h
 endif
 unifdef-y += auxvec.h
 unifdef-y += byteorder.h
+unifdef-y += bitsperlong.h
 unifdef-y += errno.h
 unifdef-y += fcntl.h
 unifdef-y += ioctl.h
diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h
new file mode 100644
index 00000000000..b7babf0206b
--- /dev/null
+++ b/include/asm-generic/atomic-long.h
@@ -0,0 +1,258 @@
+#ifndef _ASM_GENERIC_ATOMIC_LONG_H
+#define _ASM_GENERIC_ATOMIC_LONG_H
+/*
+ * Copyright (C) 2005 Silicon Graphics, Inc.
+ *	Christoph Lameter
+ *
+ * Allows to provide arch independent atomic definitions without the need to
+ * edit all arch specific atomic.h files.
+ */
+
+#include <asm/types.h>
+
+/*
+ * Suppport for atomic_long_t
+ *
+ * Casts for parameters are avoided for existing atomic functions in order to
+ * avoid issues with cast-as-lval under gcc 4.x and other limitations that the
+ * macros of a platform may have.
+ */
+
+#if BITS_PER_LONG == 64
+
+typedef atomic64_t atomic_long_t;
+
+#define ATOMIC_LONG_INIT(i)	ATOMIC64_INIT(i)
+
+static inline long atomic_long_read(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_read(v);
+}
+
+static inline void atomic_long_set(atomic_long_t *l, long i)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_set(v, i);
+}
+
+static inline void atomic_long_inc(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_inc(v);
+}
+
+static inline void atomic_long_dec(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_dec(v);
+}
+
+static inline void atomic_long_add(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_add(i, v);
+}
+
+static inline void atomic_long_sub(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_sub(i, v);
+}
+
+static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_sub_and_test(i, v);
+}
+
+static inline int atomic_long_dec_and_test(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_dec_and_test(v);
+}
+
+static inline int atomic_long_inc_and_test(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_inc_and_test(v);
+}
+
+static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_add_negative(i, v);
+}
+
+static inline long atomic_long_add_return(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_add_return(i, v);
+}
+
+static inline long atomic_long_sub_return(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_sub_return(i, v);
+}
+
+static inline long atomic_long_inc_return(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_inc_return(v);
+}
+
+static inline long atomic_long_dec_return(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_dec_return(v);
+}
+
+static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_add_unless(v, a, u);
+}
+
+#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
+
+#define atomic_long_cmpxchg(l, old, new) \
+	(atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
+#define atomic_long_xchg(v, new) \
+	(atomic64_xchg((atomic64_t *)(v), (new)))
+
+#else  /*  BITS_PER_LONG == 64  */
+
+typedef atomic_t atomic_long_t;
+
+#define ATOMIC_LONG_INIT(i)	ATOMIC_INIT(i)
+static inline long atomic_long_read(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_read(v);
+}
+
+static inline void atomic_long_set(atomic_long_t *l, long i)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_set(v, i);
+}
+
+static inline void atomic_long_inc(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_inc(v);
+}
+
+static inline void atomic_long_dec(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_dec(v);
+}
+
+static inline void atomic_long_add(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_add(i, v);
+}
+
+static inline void atomic_long_sub(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_sub(i, v);
+}
+
+static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_sub_and_test(i, v);
+}
+
+static inline int atomic_long_dec_and_test(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_dec_and_test(v);
+}
+
+static inline int atomic_long_inc_and_test(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_inc_and_test(v);
+}
+
+static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_add_negative(i, v);
+}
+
+static inline long atomic_long_add_return(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_add_return(i, v);
+}
+
+static inline long atomic_long_sub_return(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_sub_return(i, v);
+}
+
+static inline long atomic_long_inc_return(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_inc_return(v);
+}
+
+static inline long atomic_long_dec_return(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_dec_return(v);
+}
+
+static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_add_unless(v, a, u);
+}
+
+#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l))
+
+#define atomic_long_cmpxchg(l, old, new) \
+	(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
+#define atomic_long_xchg(v, new) \
+	(atomic_xchg((atomic_t *)(v), (new)))
+
+#endif  /*  BITS_PER_LONG == 64  */
+
+#endif  /*  _ASM_GENERIC_ATOMIC_LONG_H  */
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 3673a13b670..c99c64dc5f3 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -1,258 +1,165 @@
-#ifndef _ASM_GENERIC_ATOMIC_H
-#define _ASM_GENERIC_ATOMIC_H
 /*
- * Copyright (C) 2005 Silicon Graphics, Inc.
- *	Christoph Lameter
+ * Generic C implementation of atomic counter operations
+ * Originally implemented for MN10300.
  *
- * Allows to provide arch independent atomic definitions without the need to
- * edit all arch specific atomic.h files.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
  */
+#ifndef __ASM_GENERIC_ATOMIC_H
+#define __ASM_GENERIC_ATOMIC_H
 
-#include <asm/types.h>
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
 
 /*
- * Suppport for atomic_long_t
- *
- * Casts for parameters are avoided for existing atomic functions in order to
- * avoid issues with cast-as-lval under gcc 4.x and other limitations that the
- * macros of a platform may have.
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
  */
 
-#if BITS_PER_LONG == 64
-
-typedef atomic64_t atomic_long_t;
-
-#define ATOMIC_LONG_INIT(i)	ATOMIC64_INIT(i)
+#define ATOMIC_INIT(i)	{ (i) }
 
-static inline long atomic_long_read(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_read(v);
-}
-
-static inline void atomic_long_set(atomic_long_t *l, long i)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_set(v, i);
-}
-
-static inline void atomic_long_inc(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_inc(v);
-}
-
-static inline void atomic_long_dec(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_dec(v);
-}
-
-static inline void atomic_long_add(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_add(i, v);
-}
-
-static inline void atomic_long_sub(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	atomic64_sub(i, v);
-}
-
-static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_sub_and_test(i, v);
-}
-
-static inline int atomic_long_dec_and_test(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_dec_and_test(v);
-}
-
-static inline int atomic_long_inc_and_test(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_inc_and_test(v);
-}
-
-static inline int atomic_long_add_negative(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return atomic64_add_negative(i, v);
-}
-
-static inline long atomic_long_add_return(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_add_return(i, v);
-}
-
-static inline long atomic_long_sub_return(long i, atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
+#ifdef __KERNEL__
 
-	return (long)atomic64_sub_return(i, v);
-}
-
-static inline long atomic_long_inc_return(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_inc_return(v);
-}
-
-static inline long atomic_long_dec_return(atomic_long_t *l)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_dec_return(v);
-}
-
-static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
-{
-	atomic64_t *v = (atomic64_t *)l;
-
-	return (long)atomic64_add_unless(v, a, u);
-}
-
-#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
-
-#define atomic_long_cmpxchg(l, old, new) \
-	(atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
-#define atomic_long_xchg(v, new) \
-	(atomic64_xchg((atomic64_t *)(l), (new)))
-
-#else  /*  BITS_PER_LONG == 64  */
-
-typedef atomic_t atomic_long_t;
-
-#define ATOMIC_LONG_INIT(i)	ATOMIC_INIT(i)
-static inline long atomic_long_read(atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
-
-	return (long)atomic_read(v);
-}
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v)	((v)->counter)
 
-static inline void atomic_long_set(atomic_long_t *l, long i)
-{
-	atomic_t *v = (atomic_t *)l;
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
 
-	atomic_set(v, i);
-}
+#include <asm/system.h>
 
-static inline void atomic_long_inc(atomic_long_t *l)
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	atomic_inc(v);
-}
+	unsigned long flags;
+	int temp;
 
-static inline void atomic_long_dec(atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+	local_irq_save(flags);
+	temp = v->counter;
+	temp += i;
+	v->counter = temp;
+	local_irq_restore(flags);
 
-	atomic_dec(v);
+	return temp;
 }
 
-static inline void atomic_long_add(long i, atomic_long_t *l)
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	atomic_add(i, v);
-}
+	unsigned long flags;
+	int temp;
 
-static inline void atomic_long_sub(long i, atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+	local_irq_save(flags);
+	temp = v->counter;
+	temp -= i;
+	v->counter = temp;
+	local_irq_restore(flags);
 
-	atomic_sub(i, v);
+	return temp;
 }
 
-static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+static inline int atomic_add_negative(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_sub_and_test(i, v);
+	return atomic_add_return(i, v) < 0;
 }
 
-static inline int atomic_long_dec_and_test(atomic_long_t *l)
+static inline void atomic_add(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_dec_and_test(v);
+	atomic_add_return(i, v);
 }
 
-static inline int atomic_long_inc_and_test(atomic_long_t *l)
+static inline void atomic_sub(int i, atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_inc_and_test(v);
+	atomic_sub_return(i, v);
 }
 
-static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+static inline void atomic_inc(atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return atomic_add_negative(i, v);
+	atomic_add_return(1, v);
 }
 
-static inline long atomic_long_add_return(long i, atomic_long_t *l)
+static inline void atomic_dec(atomic_t *v)
 {
-	atomic_t *v = (atomic_t *)l;
-
-	return (long)atomic_add_return(i, v);
+	atomic_sub_return(1, v);
 }
 
-static inline long atomic_long_sub_return(long i, atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
 
-	return (long)atomic_sub_return(i, v);
-}
+#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
 
-static inline long atomic_long_inc_return(atomic_long_t *l)
-{
-	atomic_t *v = (atomic_t *)l;
+#define atomic_add_unless(v, a, u)				\
+({								\
+	int c, old;						\
+	c = atomic_read(v);					\
+	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
 
-	return (long)atomic_inc_return(v);
-}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-static inline long atomic_long_dec_return(atomic_long_t *l)
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 {
-	atomic_t *v = (atomic_t *)l;
+	unsigned long flags;
 
-	return (long)atomic_dec_return(v);
+	mask = ~mask;
+	local_irq_save(flags);
+	*addr &= mask;
+	local_irq_restore(flags);
 }
 
-static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
-{
-	atomic_t *v = (atomic_t *)l;
+#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
 
-	return (long)atomic_add_unless(v, a, u);
-}
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
 
-#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
 
-#define atomic_long_cmpxchg(l, old, new) \
-	(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
-#define atomic_long_xchg(v, new) \
-	(atomic_xchg((atomic_t *)(v), (new)))
+/* Assume that atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
 
-#endif  /*  BITS_PER_LONG == 64  */
+#include <asm-generic/atomic-long.h>
 
-#endif  /*  _ASM_GENERIC_ATOMIC_H  */
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_ATOMIC_H */
diff --git a/include/asm-generic/auxvec.h b/include/asm-generic/auxvec.h
new file mode 100644
index 00000000000..b99573b0ad1
--- /dev/null
+++ b/include/asm-generic/auxvec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_AUXVEC_H
+#define __ASM_GENERIC_AUXVEC_H
+/*
+ * Not all architectures need their own auxvec.h, the most
+ * common definitions are already in linux/auxvec.h.
+ */
+
+#endif /* __ASM_GENERIC_AUXVEC_H */
diff --git a/include/asm-generic/bitops.h b/include/asm-generic/bitops.h
index c9f369c4bd7..a54f4421a24 100644
--- a/include/asm-generic/bitops.h
+++ b/include/asm-generic/bitops.h
@@ -1,19 +1,29 @@
-#ifndef _ASM_GENERIC_BITOPS_H_
-#define _ASM_GENERIC_BITOPS_H_
+#ifndef __ASM_GENERIC_BITOPS_H
+#define __ASM_GENERIC_BITOPS_H
 
 /*
  * For the benefit of those who are trying to port Linux to another
  * architecture, here are some C-language equivalents.  You should
  * recode these in the native assembly language, if at all possible.
- * 
+ *
  * C language equivalents written by Theodore Ts'o, 9/26/92
  */
 
-#include <asm-generic/bitops/atomic.h>
-#include <asm-generic/bitops/non-atomic.h>
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+#endif
+
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/find.h>
 
@@ -26,8 +36,10 @@
 #include <asm-generic/bitops/hweight.h>
 #include <asm-generic/bitops/lock.h>
 
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
 #include <asm-generic/bitops/ext2-non-atomic.h>
 #include <asm-generic/bitops/ext2-atomic.h>
 #include <asm-generic/bitops/minix.h>
 
-#endif /* _ASM_GENERIC_BITOPS_H */
+#endif /* __ASM_GENERIC_BITOPS_H */
diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
index 4657f3e410f..c8946465e63 100644
--- a/include/asm-generic/bitops/atomic.h
+++ b/include/asm-generic/bitops/atomic.h
@@ -2,6 +2,7 @@
 #define _ASM_GENERIC_BITOPS_ATOMIC_H_
 
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_SMP
 #include <asm/spinlock.h>
diff --git a/include/asm-generic/bitsperlong.h b/include/asm-generic/bitsperlong.h
new file mode 100644
index 00000000000..4ae54e07de8
--- /dev/null
+++ b/include/asm-generic/bitsperlong.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_GENERIC_BITS_PER_LONG
+#define __ASM_GENERIC_BITS_PER_LONG
+
+/*
+ * There seems to be no way of detecting this automatically from user
+ * space, so 64 bit architectures should override this in their
+ * bitsperlong.h. In particular, an architecture that supports
+ * both 32 and 64 bit user space must not rely on CONFIG_64BIT
+ * to decide it, but rather check a compiler provided macro.
+ */
+#ifndef __BITS_PER_LONG
+#define __BITS_PER_LONG 32
+#endif
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_64BIT
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif /* CONFIG_64BIT */
+
+/*
+ * FIXME: The check currently breaks x86-64 build, so it's
+ * temporarily disabled. Please fix x86-64 and reenable
+ */
+#if 0 && BITS_PER_LONG != __BITS_PER_LONG
+#error Inconsistent word size. Check asm/bitsperlong.h
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_BITS_PER_LONG */
diff --git a/include/asm-generic/bugs.h b/include/asm-generic/bugs.h
new file mode 100644
index 00000000000..6c4f62ea714
--- /dev/null
+++ b/include/asm-generic/bugs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_GENERIC_BUGS_H
+#define __ASM_GENERIC_BUGS_H
+/*
+ * This file is included by 'init/main.c' to check for
+ * architecture-dependent bugs.
+ */
+
+static inline void check_bugs(void) { }
+
+#endif	/* __ASM_GENERIC_BUGS_H */
diff --git a/include/asm-generic/cache.h b/include/asm-generic/cache.h
new file mode 100644
index 00000000000..1bfcfe5c223
--- /dev/null
+++ b/include/asm-generic/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_CACHE_H
+#define __ASM_GENERIC_CACHE_H
+/*
+ * 32 bytes appears to be the most common cache line size,
+ * so make that the default here. Architectures with larger
+ * cache lines need to provide their own cache.h.
+ */
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif /* __ASM_GENERIC_CACHE_H */
diff --git a/include/asm-generic/cacheflush.h b/include/asm-generic/cacheflush.h
new file mode 100644
index 00000000000..ba4ec39a113
--- /dev/null
+++ b/include/asm-generic/cacheflush.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_CACHEFLUSH_H
+#define __ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * The cache doesn't need to be flushed when TLB entries change when
+ * the cache is mapped to physical memory, not virtual memory
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* __ASM_CACHEFLUSH_H */
diff --git a/include/asm-generic/checksum.h b/include/asm-generic/checksum.h
new file mode 100644
index 00000000000..4647c762d97
--- /dev/null
+++ b/include/asm-generic/checksum.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_GENERIC_CHECKSUM_H
+#define __ASM_GENERIC_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					int len, __wsum sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return (__force __sum16)~sum;
+}
+
+#ifndef csum_tcpudp_nofold
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum);
+#endif
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif /* __ASM_GENERIC_CHECKSUM_H */
diff --git a/include/asm-generic/current.h b/include/asm-generic/current.h
new file mode 100644
index 00000000000..5e86f6ae7ca
--- /dev/null
+++ b/include/asm-generic/current.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_CURRENT_H
+#define __ASM_GENERIC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#define get_current() (current_thread_info()->task)
+#define current get_current()
+
+#endif /* __ASM_GENERIC_CURRENT_H */
diff --git a/include/asm-generic/delay.h b/include/asm-generic/delay.h
new file mode 100644
index 00000000000..4586fec75dd
--- /dev/null
+++ b/include/asm-generic/delay.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_DELAY_H
+#define __ASM_GENERIC_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* __ASM_GENERIC_DELAY_H */
diff --git a/include/asm-generic/dma.h b/include/asm-generic/dma.h
new file mode 100644
index 00000000000..9dfc3a7f36d
--- /dev/null
+++ b/include/asm-generic/dma.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_GENERIC_DMA_H
+#define __ASM_GENERIC_DMA_H
+/*
+ * This file traditionally describes the i8237 PC style DMA controller.
+ * Most architectures don't have these any more and can get the minimal
+ * implementation from kernel/dma.c by not defining MAX_DMA_CHANNELS.
+ *
+ * Some code relies on seeing MAX_DMA_ADDRESS though.
+ */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+#endif /* __ASM_GENERIC_DMA_H */
diff --git a/include/asm-generic/fb.h b/include/asm-generic/fb.h
new file mode 100644
index 00000000000..fe8ca7fcea0
--- /dev/null
+++ b/include/asm-generic/fb.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_FB_H_
+#define __ASM_GENERIC_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* __ASM_GENERIC_FB_H_ */
diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h
new file mode 100644
index 00000000000..67e7245dc9b
--- /dev/null
+++ b/include/asm-generic/getorder.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_GENERIC_GETORDER_H
+#define __ASM_GENERIC_GETORDER_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+
+/* Pure 2^n version of get_order */
+static inline __attribute_const__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size - 1) >> (PAGE_SHIFT - 1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_GENERIC_GETORDER_H */
diff --git a/include/asm-generic/hardirq.h b/include/asm-generic/hardirq.h
new file mode 100644
index 00000000000..3d5d2c906ab
--- /dev/null
+++ b/include/asm-generic/hardirq.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_GENERIC_HARDIRQ_H
+#define __ASM_GENERIC_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned long __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#ifndef HARDIRQ_BITS
+#define HARDIRQ_BITS	8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#ifndef ack_bad_irq
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#endif /* __ASM_GENERIC_HARDIRQ_H */
diff --git a/include/asm-generic/hw_irq.h b/include/asm-generic/hw_irq.h
new file mode 100644
index 00000000000..89036d7b40e
--- /dev/null
+++ b/include/asm-generic/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_HW_IRQ_H
+#define __ASM_GENERIC_HW_IRQ_H
+/*
+ * hw_irq.h has internal declarations for the low-level interrupt
+ * controller, like the original i8259A.
+ * In general, this is not needed for new architectures.
+ */
+
+#endif /* __ASM_GENERIC_HW_IRQ_H */
diff --git a/include/asm-generic/int-l64.h b/include/asm-generic/int-l64.h
index 2af9b75d77d..1ca3efc976c 100644
--- a/include/asm-generic/int-l64.h
+++ b/include/asm-generic/int-l64.h
@@ -8,6 +8,8 @@
 #ifndef _ASM_GENERIC_INT_L64_H
 #define _ASM_GENERIC_INT_L64_H
 
+#include <asm/bitsperlong.h>
+
 #ifndef __ASSEMBLY__
 /*
  * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
index f9bc9ac29b3..f394147c073 100644
--- a/include/asm-generic/int-ll64.h
+++ b/include/asm-generic/int-ll64.h
@@ -8,6 +8,8 @@
 #ifndef _ASM_GENERIC_INT_LL64_H
 #define _ASM_GENERIC_INT_LL64_H
 
+#include <asm/bitsperlong.h>
+
 #ifndef __ASSEMBLY__
 /*
  * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
new file mode 100644
index 00000000000..bcee6365dca
--- /dev/null
+++ b/include/asm-generic/io.h
@@ -0,0 +1,300 @@
+/* Generic I/O port emulation, based on MN10300 code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_IO_H
+#define __ASM_GENERIC_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cacheflush.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_GENERIC_IOMAP
+#include <asm-generic/iomap.h>
+#endif
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the simple architectures, we just read/write the
+ * memory location directly.
+ */
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *) addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *) addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *) addr;
+}
+
+#define readb __raw_readb
+#define readw(addr) __le16_to_cpu(__raw_readw(addr))
+#define readl(addr) __le32_to_cpu(__raw_readl(addr))
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *) addr = b;
+}
+
+static inline void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *) addr = b;
+}
+
+static inline void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *) addr = b;
+}
+
+#define writeb __raw_writeb
+#define writew(b,addr) __raw_writew(__cpu_to_le16(b),addr)
+#define writel(b,addr) __raw_writel(__cpu_to_le32(b),addr)
+
+#ifdef CONFIG_64BIT
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	return *(const volatile u64 __force *) addr;
+}
+#define readq(addr) __le64_to_cpu(__raw_readq(addr))
+
+static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
+{
+	*(volatile u64 __force *) addr = b;
+}
+#define writeq(b,addr) __raw_writeq(__cpu_to_le64(b),addr)
+#endif
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+
+static inline u8 inb(unsigned long addr)
+{
+	return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u8 *buf = buffer;
+		do {
+			u8 x = inb(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u16 *buf = buffer;
+		do {
+			u16 x = inw(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+		do {
+			u32 x = inl(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u8 *buf = buffer;
+		do {
+			outb(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u16 *buf = buffer;
+		do {
+			outw(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u32 *buf = buffer;
+		do {
+			outl(*buf++, addr);
+		} while (--count);
+	}
+}
+
+#ifndef CONFIG_GENERIC_IOMAP
+#define ioread8(addr)		readb(addr)
+#define ioread16(addr)		readw(addr)
+#define ioread32(addr)		readl(addr)
+
+#define iowrite8(v, addr)	writeb((v), (addr))
+#define iowrite16(v, addr)	writew((v), (addr))
+#define iowrite32(v, addr)	writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+	insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+	insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+	insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+	outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+	outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+	outsl((unsigned long) (p), (src), (count))
+#endif /* CONFIG_GENERIC_IOMAP */
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void __force *) (x))
+
+#ifndef CONFIG_GENERIC_IOMAP
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+#endif /* CONFIG_GENERIC_IOMAP */
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa((unsigned long)address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+{
+	return (void __iomem*) (unsigned long)offset;
+}
+
+#define __ioremap(offset, size, flags)	ioremap(offset, size)
+
+#ifndef ioremap_nocache
+#define ioremap_nocache ioremap
+#endif
+
+#ifndef ioremap_wc
+#define ioremap_wc ioremap_nocache
+#endif
+
+static inline void iounmap(void *addr)
+{
+}
+
+#ifndef CONFIG_GENERIC_IOMAP
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+#else /* CONFIG_GENERIC_IOMAP */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *p);
+#endif /* CONFIG_GENERIC_IOMAP */
+
+#define xlate_dev_kmem_ptr(p)	p
+#define xlate_dev_mem_ptr(p)	((void *) (p))
+
+#ifndef virt_to_bus
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+	return ((unsigned long) address);
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+	return (void *) address;
+}
+#endif
+
+#define memset_io(a, b, c)	memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c)	memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)	memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_GENERIC_IO_H */
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
new file mode 100644
index 00000000000..a799e20a769
--- /dev/null
+++ b/include/asm-generic/ioctls.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_GENERIC_IOCTLS_H
+#define __ASM_GENERIC_IOCTLS_H
+
+#include <linux/ioctl.h>
+
+/*
+ * These are the most common definitions for tty ioctl numbers.
+ * Most of them do not use the recommended _IOC(), but there is
+ * probably some source code out there hardcoding the number,
+ * so we might as well use them for all new platforms.
+ *
+ * The architectures that use different values here typically
+ * try to be compatible with some Unix variants for the same
+ * architecture.
+ */
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485	0x542E
+#define TIOCSRS485	0x542F
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX		0x5433
+#define TCSETXF		0x5434
+#define TCSETXW		0x5435
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+/*
+ * some architectures define FIOQSIZE as 0x545E, which is used for
+ * TIOCGHAYESESP on others
+ */
+#ifndef FIOQSIZE
+# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
+# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
+# define FIOQSIZE	0x5460
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_GENERIC_IOCTLS_H */
diff --git a/include/asm-generic/ipcbuf.h b/include/asm-generic/ipcbuf.h
new file mode 100644
index 00000000000..76982b2a1b5
--- /dev/null
+++ b/include/asm-generic/ipcbuf.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_GENERIC_IPCBUF_H
+#define __ASM_GENERIC_IPCBUF_H
+
+/*
+ * The generic ipc64_perm structure:
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * ipc64_perm was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t on architectures that only had 16 bit
+ * - 32-bit seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+				/* pad if mode_t is u16: */
+	unsigned char		__pad1[4 - sizeof(__kernel_mode_t)];
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_GENERIC_IPCBUF_H */
diff --git a/include/asm-generic/irq.h b/include/asm-generic/irq.h
new file mode 100644
index 00000000000..b90ec0bc485
--- /dev/null
+++ b/include/asm-generic/irq.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_GENERIC_IRQ_H
+#define __ASM_GENERIC_IRQ_H
+
+/*
+ * NR_IRQS is the upper bound of how many interrupts can be handled
+ * in the platform. It is used to size the static irq_map array,
+ * so don't make it too big.
+ */
+#ifndef NR_IRQS
+#define NR_IRQS 64
+#endif
+
+static inline int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#endif /* __ASM_GENERIC_IRQ_H */
diff --git a/include/asm-generic/irqflags.h b/include/asm-generic/irqflags.h
new file mode 100644
index 00000000000..9aebf618275
--- /dev/null
+++ b/include/asm-generic/irqflags.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_GENERIC_IRQFLAGS_H
+#define __ASM_GENERIC_IRQFLAGS_H
+
+/*
+ * All architectures should implement at least the first two functions,
+ * usually inline assembly will be the best way.
+ */
+#ifndef RAW_IRQ_DISABLED
+#define RAW_IRQ_DISABLED 0
+#define RAW_IRQ_ENABLED 1
+#endif
+
+/* read interrupt enabled status */
+#ifndef __raw_local_save_flags
+unsigned long __raw_local_save_flags(void);
+#endif
+
+/* set interrupt enabled status */
+#ifndef raw_local_irq_restore
+void raw_local_irq_restore(unsigned long flags);
+#endif
+
+/* get status and disable interrupts */
+#ifndef __raw_local_irq_save
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags;
+	flags = __raw_local_save_flags();
+	raw_local_irq_restore(RAW_IRQ_DISABLED);
+	return flags;
+}
+#endif
+
+/* test flags */
+#ifndef raw_irqs_disabled_flags
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return flags == RAW_IRQ_DISABLED;
+}
+#endif
+
+/* unconditionally enable interrupts */
+#ifndef raw_local_irq_enable
+static inline void raw_local_irq_enable(void)
+{
+	raw_local_irq_restore(RAW_IRQ_ENABLED);
+}
+#endif
+
+/* unconditionally disable interrupts */
+#ifndef raw_local_irq_disable
+static inline void raw_local_irq_disable(void)
+{
+	raw_local_irq_restore(RAW_IRQ_DISABLED);
+}
+#endif
+
+/* test hardware interrupt enable bit */
+#ifndef raw_irqs_disabled
+static inline int raw_irqs_disabled(void)
+{
+	return raw_irqs_disabled_flags(__raw_local_save_flags());
+}
+#endif
+
+#define raw_local_save_flags(flags) \
+	do { (flags) = __raw_local_save_flags(); } while (0)
+
+#define raw_local_irq_save(flags) \
+	do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* __ASM_GENERIC_IRQFLAGS_H */
diff --git a/include/asm-generic/kmap_types.h b/include/asm-generic/kmap_types.h
new file mode 100644
index 00000000000..58c33055c30
--- /dev/null
+++ b/include/asm-generic/kmap_types.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_GENERIC_KMAP_TYPES_H
+#define _ASM_GENERIC_KMAP_TYPES_H
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_SYNC_ICACHE,
+D(14)	KM_SYNC_DCACHE,
+D(15)	KM_UML_USERCOPY, /* UML specific, for copy_*_user - used in do_op_one_page */
+D(16)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/include/asm-generic/linkage.h b/include/asm-generic/linkage.h
new file mode 100644
index 00000000000..fef7a01e541
--- /dev/null
+++ b/include/asm-generic/linkage.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_LINKAGE_H
+#define __ASM_GENERIC_LINKAGE_H
+/*
+ * linux/linkage.h provides reasonable defaults.
+ * an architecture can override them by providing its own version.
+ */
+
+#endif /* __ASM_GENERIC_LINKAGE_H */
diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
index dbd6150763e..fc218444e31 100644
--- a/include/asm-generic/local.h
+++ b/include/asm-generic/local.h
@@ -42,7 +42,7 @@ typedef struct
 
 #define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n))
 #define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n))
-#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u))
+#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u))
 #define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a)
 
 /* Non-atomic variants, ie. preemption disabled and won't be touched
diff --git a/include/asm-generic/mman-common.h b/include/asm-generic/mman-common.h
new file mode 100644
index 00000000000..3b69ad34189
--- /dev/null
+++ b/include/asm-generic/mman-common.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_GENERIC_MMAN_COMMON_H
+#define __ASM_GENERIC_MMAN_COMMON_H
+
+/*
+ Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
+ Based on: asm-xxx/mman.h
+*/
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* __ASM_GENERIC_MMAN_COMMON_H */
diff --git a/include/asm-generic/mman.h b/include/asm-generic/mman.h
index 5e3dde2ee5a..7cab4de2bca 100644
--- a/include/asm-generic/mman.h
+++ b/include/asm-generic/mman.h
@@ -1,41 +1,18 @@
-#ifndef _ASM_GENERIC_MMAN_H
-#define _ASM_GENERIC_MMAN_H
+#ifndef __ASM_GENERIC_MMAN_H
+#define __ASM_GENERIC_MMAN_H
 
-/*
- Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
- Based on: asm-xxx/mman.h
-*/
+#include <asm-generic/mman-common.h>
 
-#define PROT_READ	0x1		/* page can be read */
-#define PROT_WRITE	0x2		/* page can be written */
-#define PROT_EXEC	0x4		/* page can be executed */
-#define PROT_SEM	0x8		/* page may be used for atomic ops */
-#define PROT_NONE	0x0		/* page can not be accessed */
-#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
 
-#define MAP_SHARED	0x01		/* Share changes */
-#define MAP_PRIVATE	0x02		/* Changes are private */
-#define MAP_TYPE	0x0f		/* Mask for type of mapping */
-#define MAP_FIXED	0x10		/* Interpret addr exactly */
-#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
 
-#define MS_ASYNC	1		/* sync memory asynchronously */
-#define MS_INVALIDATE	2		/* invalidate the caches */
-#define MS_SYNC		4		/* synchronous memory sync */
-
-#define MADV_NORMAL	0		/* no further special treatment */
-#define MADV_RANDOM	1		/* expect random page references */
-#define MADV_SEQUENTIAL	2		/* expect sequential page references */
-#define MADV_WILLNEED	3		/* will need these pages */
-#define MADV_DONTNEED	4		/* don't need these pages */
-
-/* common parameters: try to keep these consistent across architectures */
-#define MADV_REMOVE	9		/* remove these pages & resources */
-#define MADV_DONTFORK	10		/* don't inherit across fork */
-#define MADV_DOFORK	11		/* do inherit across fork */
-
-/* compatibility flags */
-#define MAP_FILE	0
-
-#endif
+#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/include/asm-generic/mmu.h b/include/asm-generic/mmu.h
new file mode 100644
index 00000000000..4f4aa56d6b5
--- /dev/null
+++ b/include/asm-generic/mmu.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_GENERIC_MMU_H
+#define __ASM_GENERIC_MMU_H
+
+/*
+ * This is the mmu.h header for nommu implementations.
+ * Architectures with an MMU need something more complex.
+ */
+#ifndef __ASSEMBLY__
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+#endif
+
+#endif /* __ASM_GENERIC_MMU_H */
diff --git a/include/asm-generic/mmu_context.h b/include/asm-generic/mmu_context.h
new file mode 100644
index 00000000000..a7eec910ba6
--- /dev/null
+++ b/include/asm-generic/mmu_context.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_GENERIC_MMU_CONTEXT_H
+#define __ASM_GENERIC_MMU_CONTEXT_H
+
+/*
+ * Generic hooks for NOMMU architectures, which do not need to do
+ * anything special here.
+ */
+
+#include <asm-generic/mm_hooks.h>
+
+struct task_struct;
+struct mm_struct;
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+			struct task_struct *tsk)
+{
+}
+
+static inline int init_new_context(struct task_struct *tsk,
+			struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+static inline void deactivate_mm(struct task_struct *task,
+			struct mm_struct *mm)
+{
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			struct mm_struct *next,
+			struct task_struct *tsk)
+{
+}
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif /* __ASM_GENERIC_MMU_CONTEXT_H */
diff --git a/include/asm-generic/module.h b/include/asm-generic/module.h
new file mode 100644
index 00000000000..ed5b44de4c9
--- /dev/null
+++ b/include/asm-generic/module.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_GENERIC_MODULE_H
+#define __ASM_GENERIC_MODULE_H
+
+/*
+ * Many architectures just need a simple module
+ * loader without arch specific data.
+ */
+struct mod_arch_specific
+{
+};
+
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif
+
+#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/include/asm-generic/msgbuf.h b/include/asm-generic/msgbuf.h
new file mode 100644
index 00000000000..aec850d9159
--- /dev/null
+++ b/include/asm-generic/msgbuf.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_GENERIC_MSGBUF_H
+#define __ASM_GENERIC_MSGBUF_H
+
+#include <asm/bitsperlong.h>
+/*
+ * generic msqid64_ds structure.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * msqid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first three padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_GENERIC_MSGBUF_H */
diff --git a/include/asm-generic/mutex.h b/include/asm-generic/mutex.h
new file mode 100644
index 00000000000..fe91ab50279
--- /dev/null
+++ b/include/asm-generic/mutex.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_MUTEX_H
+#define __ASM_GENERIC_MUTEX_H
+/*
+ * Pull in the generic implementation for the mutex fastpath,
+ * which is a reasonable default on many architectures.
+ */
+
+#include <asm-generic/mutex-dec.h>
+#endif /* __ASM_GENERIC_MUTEX_H */
diff --git a/include/asm-generic/page.h b/include/asm-generic/page.h
index 14db733b8e6..75fec18cdc5 100644
--- a/include/asm-generic/page.h
+++ b/include/asm-generic/page.h
@@ -1,24 +1,99 @@
-#ifndef _ASM_GENERIC_PAGE_H
-#define _ASM_GENERIC_PAGE_H
+#ifndef __ASM_GENERIC_PAGE_H
+#define __ASM_GENERIC_PAGE_H
+/*
+ * Generic page.h implementation, for NOMMU architectures.
+ * This provides the dummy definitions for the memory management.
+ */
+
+#ifdef CONFIG_MMU
+#error need to prove a real asm/page.h
+#endif
+
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+	unsigned long pte;
+} pte_t;
+typedef struct {
+	unsigned long pmd[16];
+} pmd_t;
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_KERNEL_RAM_BASE_ADDRESS
+#define PAGE_OFFSET		(CONFIG_KERNEL_RAM_BASE_ADDRESS)
+#else
+#define PAGE_OFFSET		(0)
+#endif
 
 #ifndef __ASSEMBLY__
 
-#include <linux/compiler.h>
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#ifndef page_to_phys
+#define page_to_phys(page)      ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+#endif
+
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
 
-/* Pure 2^n version of get_order */
-static __inline__ __attribute_const__ int get_order(unsigned long size)
-{
-	int order;
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
 
-	size = (size - 1) >> (PAGE_SHIFT - 1);
-	order = -1;
-	do {
-		size >>= 1;
-		order++;
-	} while (size);
-	return order;
-}
+#endif /* __ASSEMBLY__ */
 
-#endif	/* __ASSEMBLY__ */
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
 
-#endif	/* _ASM_GENERIC_PAGE_H */
+#endif /* __ASM_GENERIC_PAGE_H */
diff --git a/include/asm-generic/param.h b/include/asm-generic/param.h
new file mode 100644
index 00000000000..cdf8251bfb6
--- /dev/null
+++ b/include/asm-generic/param.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_GENERIC_PARAM_H
+#define __ASM_GENERIC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* some user interfaces are */
+# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#ifndef EXEC_PAGESIZE
+#define EXEC_PAGESIZE	4096
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* __ASM_GENERIC_PARAM_H */
diff --git a/include/asm-generic/parport.h b/include/asm-generic/parport.h
new file mode 100644
index 00000000000..40528cb977e
--- /dev/null
+++ b/include/asm-generic/parport.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_GENERIC_PARPORT_H
+#define __ASM_GENERIC_PARPORT_H
+
+/*
+ * An ISA bus may have i8255 parallel ports at well-known
+ * locations in the I/O space, which are scanned by
+ * parport_pc_find_isa_ports.
+ *
+ * Without ISA support, the driver will only attach
+ * to devices on the PCI bus.
+ */
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+#ifdef CONFIG_ISA
+	return parport_pc_find_isa_ports(autoirq, autodma);
+#else
+	return 0;
+#endif
+}
+
+#endif /* __ASM_GENERIC_PARPORT_H */
diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h
index c36a77d3bf4..515c6e2e321 100644
--- a/include/asm-generic/pci.h
+++ b/include/asm-generic/pci.h
@@ -52,4 +52,12 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 #endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
 
+/*
+ * By default, assume that no iommu is in use and that the PCI
+ * space is mapped to address physical 0.
+ */
+#ifndef PCI_DMA_BUS_IS_PHYS
+#define PCI_DMA_BUS_IS_PHYS	(1)
 #endif
+
+#endif /* _ASM_GENERIC_PCI_H */
diff --git a/include/asm-generic/pgalloc.h b/include/asm-generic/pgalloc.h
new file mode 100644
index 00000000000..9e429d08b1f
--- /dev/null
+++ b/include/asm-generic/pgalloc.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_PGALLOC_H
+#define __ASM_GENERIC_PGALLOC_H
+/*
+ * an empty file is enough for a nommu architecture
+ */
+#ifdef CONFIG_MMU
+#error need to implement an architecture specific asm/pgalloc.h
+#endif
+
+#define check_pgt_cache()          do { } while (0)
+
+#endif /* __ASM_GENERIC_PGALLOC_H */
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 8e6d0ca70ab..e410f602cab 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -280,17 +280,18 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,
 #endif
 
 /*
- * A facility to provide batching of the reload of page tables with the
- * actual context switch code for paravirtualized guests.  By convention,
- * only one of the lazy modes (CPU, MMU) should be active at any given
- * time, entry should never be nested, and entry and exits should always
- * be paired.  This is for sanity of maintaining and reasoning about the
- * kernel code.
+ * A facility to provide batching of the reload of page tables and
+ * other process state with the actual context switch code for
+ * paravirtualized guests.  By convention, only one of the batched
+ * update (lazy) modes (CPU, MMU) should be active at any given time,
+ * entry should never be nested, and entry and exits should always be
+ * paired.  This is for sanity of maintaining and reasoning about the
+ * kernel code.  In this case, the exit (end of the context switch) is
+ * in architecture-specific code, and so doesn't need a generic
+ * definition.
  */
-#ifndef __HAVE_ARCH_ENTER_LAZY_CPU_MODE
-#define arch_enter_lazy_cpu_mode()	do {} while (0)
-#define arch_leave_lazy_cpu_mode()	do {} while (0)
-#define arch_flush_lazy_cpu_mode()	do {} while (0)
+#ifndef __HAVE_ARCH_START_CONTEXT_SWITCH
+#define arch_start_context_switch(prev)	do {} while (0)
 #endif
 
 #ifndef __HAVE_PFNMAP_TRACKING
diff --git a/include/asm-generic/posix_types.h b/include/asm-generic/posix_types.h
new file mode 100644
index 00000000000..3dab00860e7
--- /dev/null
+++ b/include/asm-generic/posix_types.h
@@ -0,0 +1,165 @@
+#ifndef __ASM_GENERIC_POSIX_TYPES_H
+#define __ASM_GENERIC_POSIX_TYPES_H
+
+#include <asm/bitsperlong.h>
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.
+ *
+ * First the types that are often defined in different ways across
+ * architectures, so that you can override them.
+ */
+
+#ifndef __kernel_ino_t
+typedef unsigned long	__kernel_ino_t;
+#endif
+
+#ifndef __kernel_mode_t
+typedef unsigned int	__kernel_mode_t;
+#endif
+
+#ifndef __kernel_nlink_t
+typedef unsigned long	__kernel_nlink_t;
+#endif
+
+#ifndef __kernel_pid_t
+typedef int		__kernel_pid_t;
+#endif
+
+#ifndef __kernel_ipc_pid_t
+typedef int		__kernel_ipc_pid_t;
+#endif
+
+#ifndef __kernel_uid_t
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+#endif
+
+#ifndef __kernel_suseconds_t
+typedef long		__kernel_suseconds_t;
+#endif
+
+#ifndef __kernel_daddr_t
+typedef int		__kernel_daddr_t;
+#endif
+
+#ifndef __kernel_uid32_t
+typedef __kernel_uid_t	__kernel_uid32_t;
+typedef __kernel_gid_t	__kernel_gid32_t;
+#endif
+
+#ifndef __kernel_old_uid_t
+typedef __kernel_uid_t	__kernel_old_uid_t;
+typedef __kernel_gid_t	__kernel_old_gid_t;
+#endif
+
+#ifndef __kernel_old_dev_t
+typedef unsigned int	__kernel_old_dev_t;
+#endif
+
+/*
+ * Most 32 bit architectures use "unsigned int" size_t,
+ * and all 64 bit architectures use "unsigned long" size_t.
+ */
+#ifndef __kernel_size_t
+#if __BITS_PER_LONG != 64
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+#else
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+#endif
+#endif
+
+/*
+ * anything below here should be completely generic
+ */
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_GENERIC_POSIX_TYPES_H */
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index 763e3b060f4..fa86f240c87 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -202,7 +202,7 @@ static inline unsigned int get_rtc_ss(void)
 {
 	struct rtc_time h;
 
-	__get_rtc_time(&h);
+	get_rtc_time(&h);
 	return h.tm_sec;
 }
 
diff --git a/include/asm-generic/scatterlist.h b/include/asm-generic/scatterlist.h
new file mode 100644
index 00000000000..8b9454496a7
--- /dev/null
+++ b/include/asm-generic/scatterlist.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_GENERIC_SCATTERLIST_H
+#define __ASM_GENERIC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifndef sg_dma_len
+/*
+ * Normally, you have an iommu on 64 bit machines, but not on 32 bit
+ * machines. Architectures that are differnt should override this.
+ */
+#if __BITS_PER_LONG == 64
+#define sg_dma_len(sg)		((sg)->dma_length)
+#else
+#define sg_dma_len(sg)		((sg)->length)
+#endif /* 64 bit */
+#endif /* sg_dma_len */
+
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(~0UL)
+#endif
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/include/asm-generic/segment.h b/include/asm-generic/segment.h
new file mode 100644
index 00000000000..5580eace622
--- /dev/null
+++ b/include/asm-generic/segment.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_SEGMENT_H
+#define __ASM_GENERIC_SEGMENT_H
+/*
+ * Only here because we have some old header files that expect it...
+ *
+ * New architectures probably don't want to have their own version.
+ */
+
+#endif /* __ASM_GENERIC_SEGMENT_H */
diff --git a/include/asm-generic/sembuf.h b/include/asm-generic/sembuf.h
new file mode 100644
index 00000000000..4cb2c13e509
--- /dev/null
+++ b/include/asm-generic/sembuf.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_GENERIC_SEMBUF_H
+#define __ASM_GENERIC_SEMBUF_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * The semid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * semid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;	/* last semop time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t	sem_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused2;
+#endif
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_GENERIC_SEMBUF_H */
diff --git a/include/asm-generic/serial.h b/include/asm-generic/serial.h
new file mode 100644
index 00000000000..5e291090fe0
--- /dev/null
+++ b/include/asm-generic/serial.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_GENERIC_SERIAL_H
+#define __ASM_GENERIC_SERIAL_H
+
+/*
+ * This should not be an architecture specific #define, oh well.
+ *
+ * Traditionally, it just describes i8250 and related serial ports
+ * that have this clock rate.
+ */
+
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* __ASM_GENERIC_SERIAL_H */
diff --git a/include/asm-generic/setup.h b/include/asm-generic/setup.h
new file mode 100644
index 00000000000..6fc26a51003
--- /dev/null
+++ b/include/asm-generic/setup.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_SETUP_H
+#define __ASM_GENERIC_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif	/* __ASM_GENERIC_SETUP_H */
diff --git a/include/asm-generic/shmbuf.h b/include/asm-generic/shmbuf.h
new file mode 100644
index 00000000000..5768fa60ac8
--- /dev/null
+++ b/include/asm-generic/shmbuf.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_GENERIC_SHMBUF_H
+#define __ASM_GENERIC_SHMBUF_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * The shmid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * shmid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused3;
+#endif
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_GENERIC_SHMBUF_H */
diff --git a/include/asm-generic/shmparam.h b/include/asm-generic/shmparam.h
new file mode 100644
index 00000000000..51a3852de73
--- /dev/null
+++ b/include/asm-generic/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_SHMPARAM_H
+#define __ASM_GENERIC_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
+
+#endif /* _ASM_GENERIC_SHMPARAM_H */
diff --git a/include/asm-generic/signal-defs.h b/include/asm-generic/signal-defs.h
new file mode 100644
index 00000000000..00f95df5429
--- /dev/null
+++ b/include/asm-generic/signal-defs.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_GENERIC_SIGNAL_DEFS_H
+#define __ASM_GENERIC_SIGNAL_DEFS_H
+
+#include <linux/compiler.h>
+
+#ifndef SIG_BLOCK
+#define SIG_BLOCK          0	/* for blocking signals */
+#endif
+#ifndef SIG_UNBLOCK
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#endif
+#ifndef SIG_SETMASK
+#define SIG_SETMASK        2	/* for setting the signal mask */
+#endif
+
+#ifndef __ASSEMBLY__
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__force __sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__force __sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__force __sighandler_t)-1)	/* error return from signal */
+#endif
+
+#endif /* __ASM_GENERIC_SIGNAL_DEFS_H */
diff --git a/include/asm-generic/signal.h b/include/asm-generic/signal.h
index dae1d872007..555c0aee8a4 100644
--- a/include/asm-generic/signal.h
+++ b/include/asm-generic/signal.h
@@ -1,28 +1,131 @@
 #ifndef __ASM_GENERIC_SIGNAL_H
 #define __ASM_GENERIC_SIGNAL_H
 
-#include <linux/compiler.h>
+#include <linux/types.h>
 
-#ifndef SIG_BLOCK
-#define SIG_BLOCK          0	/* for blocking signals */
-#endif
-#ifndef SIG_UNBLOCK
-#define SIG_UNBLOCK        1	/* for unblocking signals */
-#endif
-#ifndef SIG_SETMASK
-#define SIG_SETMASK        2	/* for setting the signal mask */
+#define _NSIG		64
+#define _NSIG_BPW	__BITS_PER_LONG
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#ifndef SIGRTMAX
+#define SIGRTMAX	_NSIG
 #endif
 
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * New architectures should not define the obsolete
+ *	SA_RESTORER	0x04000000
+ */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
 #ifndef __ASSEMBLY__
-typedef void __signalfn_t(int);
-typedef __signalfn_t __user *__sighandler_t;
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+/* not actually used, but required for linux/syscalls.h */
+typedef unsigned long old_sigset_t;
 
-typedef void __restorefn_t(void);
-typedef __restorefn_t __user *__sigrestore_t;
+#include <asm-generic/signal-defs.h>
 
-#define SIG_DFL	((__force __sighandler_t)0)	/* default signal handling */
-#define SIG_IGN	((__force __sighandler_t)1)	/* ignore signal */
-#define SIG_ERR	((__force __sighandler_t)-1)	/* error return from signal */
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+#ifdef SA_RESTORER
+	__sigrestore_t sa_restorer;
 #endif
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
 
-#endif /* __ASM_GENERIC_SIGNAL_H */
+#endif /* _ASM_GENERIC_SIGNAL_H */
diff --git a/include/asm-generic/socket.h b/include/asm-generic/socket.h
new file mode 100644
index 00000000000..5d79e409241
--- /dev/null
+++ b/include/asm-generic/socket.h
@@ -0,0 +1,63 @@
+#ifndef __ASM_GENERIC_SOCKET_H
+#define __ASM_GENERIC_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+
+#ifndef SO_PASSCRED /* powerpc only differs in these */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+#endif
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
+#endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/asm-generic/sockios.h b/include/asm-generic/sockios.h
new file mode 100644
index 00000000000..9a61a369b90
--- /dev/null
+++ b/include/asm-generic/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_GENERIC_SOCKIOS_H
+#define __ASM_GENERIC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* __ASM_GENERIC_SOCKIOS_H */
diff --git a/include/asm-generic/spinlock.h b/include/asm-generic/spinlock.h
new file mode 100644
index 00000000000..1547a03ac50
--- /dev/null
+++ b/include/asm-generic/spinlock.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_GENERIC_SPINLOCK_H
+#define __ASM_GENERIC_SPINLOCK_H
+/*
+ * You need to implement asm/spinlock.h for SMP support. The generic
+ * version does not handle SMP.
+ */
+#ifdef CONFIG_SMP
+#error need an architecture specific asm/spinlock.h
+#endif
+
+#endif /* __ASM_GENERIC_SPINLOCK_H */
diff --git a/include/asm-generic/stat.h b/include/asm-generic/stat.h
new file mode 100644
index 00000000000..47e64170305
--- /dev/null
+++ b/include/asm-generic/stat.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_GENERIC_STAT_H
+#define __ASM_GENERIC_STAT_H
+
+/*
+ * Everybody gets this wrong and has to stick with it for all
+ * eternity. Hopefully, this version gets used by new architectures
+ * so they don't fall into the same traps.
+ *
+ * stat64 is copied from powerpc64, with explicit padding added.
+ * stat is the same structure layout on 64-bit, without the 'long long'
+ * types.
+ *
+ * By convention, 64 bit architectures use the stat interface, while
+ * 32 bit architectures use the stat64 interface. Note that we don't
+ * provide an __old_kernel_stat here, which new architecture should
+ * not have to start with.
+ */
+
+#include <asm/bitsperlong.h>
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long	st_dev;		/* Device.  */
+	unsigned long	st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long	st_rdev;	/* Device number, if device.  */
+	unsigned long	__pad1;
+	long		st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#if __BITS_PER_LONG != 64
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+struct stat64 {
+	unsigned long long st_dev;	/* Device.  */
+	unsigned long long st_ino;	/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned long long __pad1;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+#endif
+
+#endif /* __ASM_GENERIC_STAT_H */
diff --git a/include/asm-generic/string.h b/include/asm-generic/string.h
new file mode 100644
index 00000000000..de5e0201459
--- /dev/null
+++ b/include/asm-generic/string.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_GENERIC_STRING_H
+#define __ASM_GENERIC_STRING_H
+/*
+ * The kernel provides all required functions in lib/string.c
+ *
+ * Architectures probably want to provide at least their own optimized
+ * memcpy and memset functions though.
+ */
+
+#endif /* __ASM_GENERIC_STRING_H */
diff --git a/include/asm-generic/swab.h b/include/asm-generic/swab.h
new file mode 100644
index 00000000000..a8e9029d9eb
--- /dev/null
+++ b/include/asm-generic/swab.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_GENERIC_SWAB_H
+#define _ASM_GENERIC_SWAB_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * 32 bit architectures typically (but not always) want to
+ * set __SWAB_64_THRU_32__. In user space, this is only
+ * valid if the compiler supports 64 bit data types.
+ */
+
+#if __BITS_PER_LONG == 32
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+#endif
+
+#endif /* _ASM_GENERIC_SWAB_H */
diff --git a/include/asm-generic/syscalls.h b/include/asm-generic/syscalls.h
new file mode 100644
index 00000000000..df84e3b0455
--- /dev/null
+++ b/include/asm-generic/syscalls.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_GENERIC_SYSCALLS_H
+#define __ASM_GENERIC_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+/*
+ * Calling conventions for these system calls can differ, so
+ * it's possible to override them.
+ */
+#ifndef sys_clone
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+			void __user *parent_tid, void __user *child_tid,
+			struct pt_regs *regs);
+#endif
+
+#ifndef sys_fork
+asmlinkage long sys_fork(struct pt_regs *regs);
+#endif
+
+#ifndef sys_vfork
+asmlinkage long sys_vfork(struct pt_regs *regs);
+#endif
+
+#ifndef sys_execve
+asmlinkage long sys_execve(char __user *filename, char __user * __user *argv,
+			char __user * __user *envp, struct pt_regs *regs);
+#endif
+
+#ifndef sys_mmap2
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+#endif
+
+#ifndef sys_mmap
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, off_t pgoff);
+#endif
+
+#ifndef sys_sigaltstack
+asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
+			struct pt_regs *);
+#endif
+
+#ifndef sys_rt_sigreturn
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs);
+#endif
+
+#ifndef sys_rt_sigsuspend
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize);
+#endif
+
+#ifndef sys_rt_sigaction
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+			 struct sigaction __user *oact, size_t sigsetsize);
+#endif
+
+#endif /* __ASM_GENERIC_SYSCALLS_H */
diff --git a/include/asm-generic/system.h b/include/asm-generic/system.h
new file mode 100644
index 00000000000..efa403b5e12
--- /dev/null
+++ b/include/asm-generic/system.h
@@ -0,0 +1,161 @@
+/* Generic system definitions, based on MN10300 definitions.
+ *
+ * It should be possible to use these on really simple architectures,
+ * but it serves more as a starting point for new ports.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_SYSTEM_H
+#define __ASM_GENERIC_SYSTEM_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+#include <asm/cmpxchg-local.h>
+
+struct task_struct;
+
+/* context switching is now performed out-of-line in switch_to.S */
+extern struct task_struct *__switch_to(struct task_struct *,
+		struct task_struct *);
+#define switch_to(prev, next, last)					\
+	do {								\
+		((last) = __switch_to((prev), (next)));			\
+	} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * This implementation only contains a compiler barrier.
+ */
+
+#define mb()	asm volatile ("": : :"memory")
+#define rmb()	mb()
+#define wmb()	asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#endif
+
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends()		do {} while (0)
+#define smp_read_barrier_depends()	do {} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+/* This function doesn't exist, so you'll get a linker error
+ *    if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline
+unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	unsigned long ret, flags;
+
+	switch (size) {
+	case 1:
+#ifdef __xchg_u8
+		return __xchg_u8(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u8 *)ptr;
+		*(volatile u8 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u8 */
+
+	case 2:
+#ifdef __xchg_u16
+		return __xchg_u16(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u16 *)ptr;
+		*(volatile u16 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u16 */
+
+	case 4:
+#ifdef __xchg_u32
+		return __xchg_u32(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u32 *)ptr;
+		*(volatile u32 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u32 */
+
+#ifdef CONFIG_64BIT
+	case 8:
+#ifdef __xchg_u64
+		return __xchg_u64(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u64 *)ptr;
+		*(volatile u64 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u64 */
+#endif /* CONFIG_64BIT */
+
+	default:
+		__xchg_called_with_bad_pointer();
+		return x;
+	}
+}
+
+#define xchg(ptr, x) \
+	((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+				      unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define cmpxchg(ptr, o, n)					\
+	((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+					(unsigned long)(o),	\
+					(unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_SYSTEM_H */
diff --git a/include/asm-generic/termbits.h b/include/asm-generic/termbits.h
new file mode 100644
index 00000000000..1c9773d48cb
--- /dev/null
+++ b/include/asm-generic/termbits.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_GENERIC_TERMBITS_H
+#define __ASM_GENERIC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_GENERIC_TERMBITS_H */
diff --git a/include/asm-generic/termios-base.h b/include/asm-generic/termios-base.h
new file mode 100644
index 00000000000..0a769feb22b
--- /dev/null
+++ b/include/asm-generic/termios-base.h
@@ -0,0 +1,77 @@
+/* termios.h: generic termios/termio user copying/translation
+ */
+
+#ifndef _ASM_GENERIC_TERMIOS_BASE_H
+#define _ASM_GENERIC_TERMIOS_BASE_H
+
+#include <asm/uaccess.h>
+
+#ifndef __ARCH_TERMIO_GETPUT
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
+}
+
+#ifndef user_termios_to_kernel_termios
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#endif
+
+#ifndef kernel_termios_to_user_termios
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#endif
+
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __ARCH_TERMIO_GETPUT */
+
+#endif /* _ASM_GENERIC_TERMIOS_BASE_H */
diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h
index 7d39ecc92d9..d0922adc56d 100644
--- a/include/asm-generic/termios.h
+++ b/include/asm-generic/termios.h
@@ -1,18 +1,68 @@
-/* termios.h: generic termios/termio user copying/translation
- */
-
 #ifndef _ASM_GENERIC_TERMIOS_H
 #define _ASM_GENERIC_TERMIOS_H
+/*
+ * Most architectures have straight copies of the x86 code, with
+ * varying levels of bug fixes on top. Usually it's a good idea
+ * to use this generic version instead, but be careful to avoid
+ * ABI changes.
+ * New architectures should not provide their own version.
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
 
 #include <asm/uaccess.h>
 
-#ifndef __ARCH_TERMIO_GETPUT
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
 
 /*
  * Translate a "termio" structure into a "termios". Ugh.
  */
 static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						struct termio __user *termio)
+						const struct termio __user *termio)
 {
 	unsigned short tmp;
 
@@ -61,17 +111,44 @@ static inline int kernel_termios_to_user_termio(struct termio __user *termio,
 	return 0;
 }
 
-#ifndef user_termios_to_kernel_termios
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#endif
+#ifdef TCGETS2
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios2 __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios2));
+}
 
-#ifndef kernel_termios_to_user_termios
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
-#endif
+static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios2));
+}
 
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+						   struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+						   struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#else /* TCGETS2 */
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#endif /* TCGETS2 */
 
-#endif	/* __ARCH_TERMIO_GETPUT */
+#endif	/* __KERNEL__ */
 
 #endif /* _ASM_GENERIC_TERMIOS_H */
diff --git a/include/asm-generic/timex.h b/include/asm-generic/timex.h
new file mode 100644
index 00000000000..b2243cb8d6f
--- /dev/null
+++ b/include/asm-generic/timex.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_GENERIC_TIMEX_H
+#define __ASM_GENERIC_TIMEX_H
+
+/*
+ * If you have a cycle counter, return the value here.
+ */
+typedef unsigned long cycles_t;
+#ifndef get_cycles
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Architectures are encouraged to implement read_current_timer
+ * and define this in order to avoid the expensive delay loop
+ * calibration during boot.
+ */
+#undef ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* __ASM_GENERIC_TIMEX_H */
diff --git a/include/asm-generic/tlbflush.h b/include/asm-generic/tlbflush.h
new file mode 100644
index 00000000000..c7af037024c
--- /dev/null
+++ b/include/asm-generic/tlbflush.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_GENERIC_TLBFLUSH_H
+#define __ASM_GENERIC_TLBFLUSH_H
+/*
+ * This is a dummy tlbflush implementation that can be used on all
+ * nommu architectures.
+ * If you have an MMU, you need to write your own functions.
+ */
+#ifdef CONFIG_MMU
+#error need to implement an architecture specific asm/tlbflush.h
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+
+#endif /* __ASM_GENERIC_TLBFLUSH_H */
diff --git a/include/asm-generic/types.h b/include/asm-generic/types.h
new file mode 100644
index 00000000000..fba7d33ca3f
--- /dev/null
+++ b/include/asm-generic/types.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_GENERIC_TYPES_H
+#define _ASM_GENERIC_TYPES_H
+/*
+ * int-ll64 is used practically everywhere now,
+ * so use it as a reasonable default.
+ */
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+/*
+ * DMA addresses may be very different from physical addresses
+ * and pointers. i386 and powerpc may have 64 bit DMA on 32 bit
+ * systems, while sparc64 uses 32 bit DMA addresses for 64 bit
+ * physical addresses.
+ * This default defines dma_addr_t to have the same size as
+ * phys_addr_t, which is the most common way.
+ * Do not define the dma64_addr_t type, which never really
+ * worked.
+ */
+#ifndef dma_addr_t
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif /* CONFIG_PHYS_ADDR_T_64BIT */
+#endif /* dma_addr_t */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/include/asm-generic/uaccess-unaligned.h b/include/asm-generic/uaccess-unaligned.h
new file mode 100644
index 00000000000..67deb898f0c
--- /dev/null
+++ b/include/asm-generic/uaccess-unaligned.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_GENERIC_UACCESS_UNALIGNED_H
+#define __ASM_GENERIC_UACCESS_UNALIGNED_H
+
+/*
+ * This macro should be used instead of __get_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __get_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x;					\
+	__copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0;	\
+	(x) = __x;							\
+})
+
+
+/*
+ * This macro should be used instead of __put_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __put_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x = (x);					\
+	__copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0;	\
+})
+
+#endif /* __ASM_GENERIC_UACCESS_UNALIGNED_H */
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 549cb3a1640..6d8cab22e29 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -1,26 +1,325 @@
-#ifndef _ASM_GENERIC_UACCESS_H_
-#define _ASM_GENERIC_UACCESS_H_
+#ifndef __ASM_GENERIC_UACCESS_H
+#define __ASM_GENERIC_UACCESS_H
 
 /*
- * This macro should be used instead of __get_user() when accessing
- * values at locations that are not known to be aligned.
+ * User space memory access functions, these should work
+ * on a ny machine that has kernel and user data in the same
+ * address space, e.g. all NOMMU machines.
  */
-#define __get_user_unaligned(x, ptr)					\
-({									\
-	__typeof__ (*(ptr)) __x;					\
-	__copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0;	\
-	(x) = __x;							\
-})
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#ifndef KERNEL_DS
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#endif
+
+#ifndef USER_DS
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#ifndef get_fs
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+}
+#endif
 
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type, addr, size) __access_ok((unsigned long)(addr),(size))
+
+/*
+ * The architecture should really override this if possible, at least
+ * doing a check on the get_fs()
+ */
+#ifndef __access_ok
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	return 1;
+}
+#endif
 
 /*
- * This macro should be used instead of __put_user() when accessing
- * values at locations that are not known to be aligned.
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
  */
-#define __put_user_unaligned(x, ptr)					\
-({									\
-	__typeof__ (*(ptr)) __x = (x);					\
-	__copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0;	\
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * architectures with an MMU should override these two
+ */
+#ifndef __copy_from_user
+static inline __must_check long __copy_from_user(void *to,
+		const void __user * from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		switch(n) {
+		case 1:
+			*(u8 *)to = *(u8 __force *)from;
+			return 0;
+		case 2:
+			*(u16 *)to = *(u16 __force *)from;
+			return 0;
+		case 4:
+			*(u32 *)to = *(u32 __force *)from;
+			return 0;
+#ifdef CONFIG_64BIT
+		case 8:
+			*(u64 *)to = *(u64 __force *)from;
+			return 0;
+#endif
+		default:
+			break;
+		}
+	}
+
+	memcpy(to, (const void __force *)from, n);
+	return 0;
+}
+#endif
+
+#ifndef __copy_to_user
+static inline __must_check long __copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		switch(n) {
+		case 1:
+			*(u8 __force *)to = *(u8 *)from;
+			return 0;
+		case 2:
+			*(u16 __force *)to = *(u16 *)from;
+			return 0;
+		case 4:
+			*(u32 __force *)to = *(u32 *)from;
+			return 0;
+#ifdef CONFIG_64BIT
+		case 8:
+			*(u64 __force *)to = *(u64 *)from;
+			return 0;
+#endif
+		default:
+			break;
+		}
+	}
+
+	memcpy((void __force *)to, from, n);
+	return 0;
+}
+#endif
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ * This version just falls back to copy_{from,to}_user, which should
+ * provide a fast-path for small values.
+ */
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err = -EFAULT;					\
+        __chk_user_ptr(ptr);                                    \
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__access_ok(ptr, sizeof (*ptr)) ?			\
+		__put_user(x, ptr) :				\
+		-EFAULT;					\
 })
 
-#endif /* _ASM_GENERIC_UACCESS_H */
+static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
+{
+	size = __copy_to_user(ptr, x, size);
+	return size ? -EFAULT : size;
+}
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#define __get_user(x, ptr)					\
+({								\
+	int __gu_err = -EFAULT;					\
+	__chk_user_ptr(ptr);					\
+	switch (sizeof(*(ptr))) {				\
+	case 1: {						\
+		unsigned char __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 2: {						\
+		unsigned short __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 4: {						\
+		unsigned int __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 8: {						\
+		unsigned long long __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	__gu_err;						\
+})
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__access_ok(ptr, sizeof (*ptr)) ?			\
+		__get_user(x, ptr) :				\
+		-EFAULT;					\
+})
+
+static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
+{
+	size = __copy_from_user(x, ptr, size);
+	return size ? -EFAULT : size;
+}
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#ifndef __copy_from_user_inatomic
+#define __copy_from_user_inatomic __copy_from_user
+#endif
+
+#ifndef __copy_to_user_inatomic
+#define __copy_to_user_inatomic __copy_to_user
+#endif
+
+static inline long copy_from_user(void *to,
+		const void __user * from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(from, n))
+		return __copy_from_user(to, from, n);
+	else
+		return n;
+}
+
+static inline long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(to, n))
+		return __copy_to_user(to, from, n);
+	else
+		return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#ifndef __strncpy_from_user
+static inline long
+__strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	char *tmp;
+	strncpy(dst, (const char __force *)src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return (tmp - dst);
+}
+#endif
+
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!__access_ok(src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+#ifndef strnlen_user
+static inline long strnlen_user(const char __user *src, long n)
+{
+	return strlen((void * __force)src) + 1;
+}
+#endif
+
+static inline long strlen_user(const char __user *src)
+{
+	return strnlen_user(src, 32767);
+}
+
+/*
+ * Zero Userspace
+ */
+#ifndef __clear_user
+static inline __must_check unsigned long
+__clear_user(void __user *to, unsigned long n)
+{
+	memset((void __force *)to, 0, n);
+	return 0;
+}
+#endif
+
+static inline __must_check unsigned long
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (!__access_ok(to, n))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+#endif /* __ASM_GENERIC_UACCESS_H */
diff --git a/include/asm-generic/ucontext.h b/include/asm-generic/ucontext.h
new file mode 100644
index 00000000000..ad77343e8a9
--- /dev/null
+++ b/include/asm-generic/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_UCONTEXT_H
+#define __ASM_GENERIC_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/include/asm-generic/unaligned.h b/include/asm-generic/unaligned.h
new file mode 100644
index 00000000000..03cf5936bad
--- /dev/null
+++ b/include/asm-generic/unaligned.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_GENERIC_UNALIGNED_H
+#define __ASM_GENERIC_UNALIGNED_H
+
+/*
+ * This is the most generic implementation of unaligned accesses
+ * and should work almost anywhere.
+ *
+ * If an architecture can handle unaligned accesses in hardware,
+ * it may want to use the linux/unaligned/access_ok.h implementation
+ * instead.
+ */
+#include <asm/byteorder.h>
+
+#if defined(__LITTLE_ENDIAN)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#elif defined(__BIG_ENDIAN)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#else
+# error need to define endianess
+#endif
+
+#endif /* __ASM_GENERIC_UNALIGNED_H */
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
new file mode 100644
index 00000000000..5b34b6233d6
--- /dev/null
+++ b/include/asm-generic/unistd.h
@@ -0,0 +1,854 @@
+#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_GENERIC_UNISTD_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * This file contains the system call numbers, based on the
+ * layout of the x86-64 architecture, which embeds the
+ * pointer to the syscall in the table.
+ *
+ * As a basic principle, no duplication of functionality
+ * should be added, e.g. we don't use lseek when llseek
+ * is present. New architectures should use this file
+ * and implement the less feature-full calls in user space.
+ */
+
+#ifndef __SYSCALL
+#define __SYSCALL(x, y)
+#endif
+
+#if __BITS_PER_LONG == 32
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _32)
+#else
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _64)
+#endif
+
+#define __NR_io_setup 0
+__SYSCALL(__NR_io_setup, sys_io_setup)
+#define __NR_io_destroy 1
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_submit 2
+__SYSCALL(__NR_io_submit, sys_io_submit)
+#define __NR_io_cancel 3
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_io_getevents 4
+__SYSCALL(__NR_io_getevents, sys_io_getevents)
+
+/* fs/xattr.c */
+#define __NR_setxattr 5
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr 6
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr 7
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr 8
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr 9
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr 10
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr 11
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr 12
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr 13
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr 14
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr 15
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr 16
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+
+/* fs/dcache.c */
+#define __NR_getcwd 17
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+/* fs/cookies.c */
+#define __NR_lookup_dcookie 18
+__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
+
+/* fs/eventfd.c */
+#define __NR_eventfd2 19
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+
+/* fs/eventpoll.c */
+#define __NR_epoll_create1 20
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_epoll_ctl 21
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_epoll_pwait 22
+__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
+
+/* fs/fcntl.c */
+#define __NR_dup 23
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup3 24
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR3264_fcntl 25
+__SC_3264(__NR3264_fcntl, sys_fcntl64, sys_fcntl)
+
+/* fs/inotify_user.c */
+#define __NR_inotify_init1 26
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+#define __NR_inotify_add_watch 27
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch 28
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+
+/* fs/ioctl.c */
+#define __NR_ioctl 29
+__SYSCALL(__NR_ioctl, sys_ioctl)
+
+/* fs/ioprio.c */
+#define __NR_ioprio_set 30
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 31
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+
+/* fs/locks.c */
+#define __NR_flock 32
+__SYSCALL(__NR_flock, sys_flock)
+
+/* fs/namei.c */
+#define __NR_mknodat 33
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_mkdirat 34
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_unlinkat 35
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_symlinkat 36
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_linkat 37
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_renameat 38
+__SYSCALL(__NR_renameat, sys_renameat)
+
+/* fs/namespace.c */
+#define __NR_umount2 39
+__SYSCALL(__NR_umount2, sys_umount)
+#define __NR_mount 40
+__SYSCALL(__NR_mount, sys_mount)
+#define __NR_pivot_root 41
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+/* fs/nfsctl.c */
+#define __NR_nfsservctl 42
+__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+
+/* fs/open.c */
+#define __NR3264_statfs 43
+__SC_3264(__NR3264_statfs, sys_statfs64, sys_statfs)
+#define __NR3264_fstatfs 44
+__SC_3264(__NR3264_fstatfs, sys_fstatfs64, sys_fstatfs)
+#define __NR3264_truncate 45
+__SC_3264(__NR3264_truncate, sys_truncate64, sys_truncate)
+#define __NR3264_ftruncate 46
+__SC_3264(__NR3264_ftruncate, sys_ftruncate64, sys_ftruncate)
+
+#define __NR_fallocate 47
+__SYSCALL(__NR_fallocate, sys_fallocate)
+#define __NR_faccessat 48
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_chdir 49
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir 50
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_chroot 51
+__SYSCALL(__NR_chroot, sys_chroot)
+#define __NR_fchmod 52
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_fchmodat 53
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_fchownat 54
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_fchown 55
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_openat 56
+__SYSCALL(__NR_openat, sys_openat)
+#define __NR_close 57
+__SYSCALL(__NR_close, sys_close)
+#define __NR_vhangup 58
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+/* fs/pipe.c */
+#define __NR_pipe2 59
+__SYSCALL(__NR_pipe2, sys_pipe2)
+
+/* fs/quota.c */
+#define __NR_quotactl 60
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+/* fs/readdir.c */
+#define __NR_getdents64 61
+__SYSCALL(__NR_getdents64, sys_getdents64)
+
+/* fs/read_write.c */
+#define __NR3264_lseek 62
+__SC_3264(__NR3264_lseek, sys_llseek, sys_lseek)
+#define __NR_read 63
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write 64
+__SYSCALL(__NR_write, sys_write)
+#define __NR_readv 65
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev 66
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_pread64 67
+__SYSCALL(__NR_pread64, sys_pread64)
+#define __NR_pwrite64 68
+__SYSCALL(__NR_pwrite64, sys_pwrite64)
+#define __NR_preadv 69
+__SYSCALL(__NR_preadv, sys_preadv)
+#define __NR_pwritev 70
+__SYSCALL(__NR_pwritev, sys_pwritev)
+
+/* fs/sendfile.c */
+#define __NR3264_sendfile 71
+__SC_3264(__NR3264_sendfile, sys_sendfile64, sys_sendfile)
+
+/* fs/select.c */
+#define __NR_pselect6 72
+__SYSCALL(__NR_pselect6, sys_pselect6)
+#define __NR_ppoll 73
+__SYSCALL(__NR_ppoll, sys_ppoll)
+
+/* fs/signalfd.c */
+#define __NR_signalfd4 74
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
+
+/* fs/splice.c */
+#define __NR_vmsplice 75
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+#define __NR_splice 76
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_tee 77
+__SYSCALL(__NR_tee, sys_tee)
+
+/* fs/stat.c */
+#define __NR_readlinkat 78
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR3264_fstatat 79
+__SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat)
+#define __NR3264_fstat 80
+__SC_3264(__NR3264_fstat, sys_fstat64, sys_newfstat)
+
+/* fs/sync.c */
+#define __NR_sync 81
+__SYSCALL(__NR_sync, sys_sync)
+#define __NR_fsync 82
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync 83
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#define __NR_sync_file_range 84
+__SYSCALL(__NR_sync_file_range, sys_sync_file_range) /* .long sys_sync_file_range2, */
+
+/* fs/timerfd.c */
+#define __NR_timerfd_create 85
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_timerfd_settime 86
+__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
+#define __NR_timerfd_gettime 87
+__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+
+/* fs/utimes.c */
+#define __NR_utimensat 88
+__SYSCALL(__NR_utimensat, sys_utimensat)
+
+/* kernel/acct.c */
+#define __NR_acct 89
+__SYSCALL(__NR_acct, sys_acct)
+
+/* kernel/capability.c */
+#define __NR_capget 90
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset 91
+__SYSCALL(__NR_capset, sys_capset)
+
+/* kernel/exec_domain.c */
+#define __NR_personality 92
+__SYSCALL(__NR_personality, sys_personality)
+
+/* kernel/exit.c */
+#define __NR_exit 93
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_exit_group 94
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_waitid 95
+__SYSCALL(__NR_waitid, sys_waitid)
+
+/* kernel/fork.c */
+#define __NR_set_tid_address 96
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_unshare 97
+__SYSCALL(__NR_unshare, sys_unshare)
+
+/* kernel/futex.c */
+#define __NR_futex 98
+__SYSCALL(__NR_futex, sys_futex)
+#define __NR_set_robust_list 99
+__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
+#define __NR_get_robust_list 100
+__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
+
+/* kernel/hrtimer.c */
+#define __NR_nanosleep 101
+__SYSCALL(__NR_nanosleep, sys_nanosleep)
+
+/* kernel/itimer.c */
+#define __NR_getitimer 102
+__SYSCALL(__NR_getitimer, sys_getitimer)
+#define __NR_setitimer 103
+__SYSCALL(__NR_setitimer, sys_setitimer)
+
+/* kernel/kexec.c */
+#define __NR_kexec_load 104
+__SYSCALL(__NR_kexec_load, sys_kexec_load)
+
+/* kernel/module.c */
+#define __NR_init_module 105
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module 106
+__SYSCALL(__NR_delete_module, sys_delete_module)
+
+/* kernel/posix-timers.c */
+#define __NR_timer_create 107
+__SYSCALL(__NR_timer_create, sys_timer_create)
+#define __NR_timer_gettime 108
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
+#define __NR_timer_getoverrun 109
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_settime 110
+__SYSCALL(__NR_timer_settime, sys_timer_settime)
+#define __NR_timer_delete 111
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime 112
+__SYSCALL(__NR_clock_settime, sys_clock_settime)
+#define __NR_clock_gettime 113
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
+#define __NR_clock_getres 114
+__SYSCALL(__NR_clock_getres, sys_clock_getres)
+#define __NR_clock_nanosleep 115
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
+
+/* kernel/printk.c */
+#define __NR_syslog 116
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* kernel/ptrace.c */
+#define __NR_ptrace 117
+__SYSCALL(__NR_ptrace, sys_ptrace)
+
+/* kernel/sched.c */
+#define __NR_sched_setparam 118
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_setscheduler 119
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler 120
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_getparam 121
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setaffinity 122
+__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
+#define __NR_sched_getaffinity 123
+__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
+#define __NR_sched_yield 124
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_sched_get_priority_max 125
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min 126
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval 127
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
+
+/* kernel/signal.c */
+#define __NR_restart_syscall 128
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_kill 129
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_tkill 130
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_tgkill 131
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_sigaltstack 132
+__SYSCALL(__NR_sigaltstack, sys_sigaltstack)
+#define __NR_rt_sigsuspend 133
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend) /* __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __NR_rt_sigaction 134
+__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction) /* __ARCH_WANT_SYS_RT_SIGACTION */
+#define __NR_rt_sigprocmask 135
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigpending 136
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait 137
+__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo 138
+__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
+#define __NR_rt_sigreturn 139
+__SYSCALL(__NR_rt_sigreturn, sys_rt_sigreturn) /* sys_rt_sigreturn_wrapper, */
+
+/* kernel/sys.c */
+#define __NR_setpriority 140
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_getpriority 141
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_reboot 142
+__SYSCALL(__NR_reboot, sys_reboot)
+#define __NR_setregid 143
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_setgid 144
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_setreuid 145
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setuid 146
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setresuid 147
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid 148
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid 149
+__SYSCALL(__NR_setresgid, sys_setresgid)
+#define __NR_getresgid 150
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_setfsuid 151
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid 152
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_times 153
+__SYSCALL(__NR_times, sys_times)
+#define __NR_setpgid 154
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getpgid 155
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_getsid 156
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_setsid 157
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_getgroups 158
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups 159
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_uname 160
+__SYSCALL(__NR_uname, sys_newuname)
+#define __NR_sethostname 161
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname 162
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+#define __NR_getrlimit 163
+__SYSCALL(__NR_getrlimit, sys_getrlimit)
+#define __NR_setrlimit 164
+__SYSCALL(__NR_setrlimit, sys_setrlimit)
+#define __NR_getrusage 165
+__SYSCALL(__NR_getrusage, sys_getrusage)
+#define __NR_umask 166
+__SYSCALL(__NR_umask, sys_umask)
+#define __NR_prctl 167
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_getcpu 168
+__SYSCALL(__NR_getcpu, sys_getcpu)
+
+/* kernel/time.c */
+#define __NR_gettimeofday 169
+__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
+#define __NR_settimeofday 170
+__SYSCALL(__NR_settimeofday, sys_settimeofday)
+#define __NR_adjtimex 171
+__SYSCALL(__NR_adjtimex, sys_adjtimex)
+
+/* kernel/timer.c */
+#define __NR_getpid 172
+__SYSCALL(__NR_getpid, sys_getpid)
+#define __NR_getppid 173
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getuid 174
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_geteuid 175
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getgid 176
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_getegid 177
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_gettid 178
+__SYSCALL(__NR_gettid, sys_gettid)
+#define __NR_sysinfo 179
+__SYSCALL(__NR_sysinfo, sys_sysinfo)
+
+/* ipc/mqueue.c */
+#define __NR_mq_open 180
+__SYSCALL(__NR_mq_open, sys_mq_open)
+#define __NR_mq_unlink 181
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend 182
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
+#define __NR_mq_timedreceive 183
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
+#define __NR_mq_notify 184
+__SYSCALL(__NR_mq_notify, sys_mq_notify)
+#define __NR_mq_getsetattr 185
+__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
+
+/* ipc/msg.c */
+#define __NR_msgget 186
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgctl 187
+__SYSCALL(__NR_msgctl, sys_msgctl)
+#define __NR_msgrcv 188
+__SYSCALL(__NR_msgrcv, sys_msgrcv)
+#define __NR_msgsnd 189
+__SYSCALL(__NR_msgsnd, sys_msgsnd)
+
+/* ipc/sem.c */
+#define __NR_semget 190
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semctl 191
+__SYSCALL(__NR_semctl, sys_semctl)
+#define __NR_semtimedop 192
+__SYSCALL(__NR_semtimedop, sys_semtimedop)
+#define __NR_semop 193
+__SYSCALL(__NR_semop, sys_semop)
+
+/* ipc/shm.c */
+#define __NR_shmget 194
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmctl 195
+__SYSCALL(__NR_shmctl, sys_shmctl)
+#define __NR_shmat 196
+__SYSCALL(__NR_shmat, sys_shmat)
+#define __NR_shmdt 197
+__SYSCALL(__NR_shmdt, sys_shmdt)
+
+/* net/socket.c */
+#define __NR_socket 198
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_socketpair 199
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_bind 200
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen 201
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_accept 202
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_connect 203
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_getsockname 204
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername 205
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_sendto 206
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom 207
+__SYSCALL(__NR_recvfrom, sys_recvfrom)
+#define __NR_setsockopt 208
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt 209
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+#define __NR_shutdown 210
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_sendmsg 211
+__SYSCALL(__NR_sendmsg, sys_sendmsg)
+#define __NR_recvmsg 212
+__SYSCALL(__NR_recvmsg, sys_recvmsg)
+
+/* mm/filemap.c */
+#define __NR_readahead 213
+__SYSCALL(__NR_readahead, sys_readahead)
+
+/* mm/nommu.c, also with MMU */
+#define __NR_brk 214
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_munmap 215
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_mremap 216
+__SYSCALL(__NR_mremap, sys_mremap)
+
+/* security/keys/keyctl.c */
+#define __NR_add_key 217
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key 218
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl 219
+__SYSCALL(__NR_keyctl, sys_keyctl)
+
+/* arch/example/kernel/sys_example.c */
+#define __NR_clone 220
+__SYSCALL(__NR_clone, sys_clone)	/* .long sys_clone_wrapper */
+#define __NR_execve 221
+__SYSCALL(__NR_execve, sys_execve)	/* .long sys_execve_wrapper */
+
+#define __NR3264_mmap 222
+__SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap)
+/* mm/fadvise.c */
+#define __NR3264_fadvise64 223
+__SC_3264(__NR3264_fadvise64, sys_fadvise64_64, sys_fadvise64)
+
+/* mm/, CONFIG_MMU only */
+#ifndef __ARCH_NOMMU
+#define __NR_swapon 224
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff 225
+__SYSCALL(__NR_swapoff, sys_swapoff)
+#define __NR_mprotect 226
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_msync 227
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mlock 228
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock 229
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall 230
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall 231
+__SYSCALL(__NR_munlockall, sys_munlockall)
+#define __NR_mincore 232
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise 233
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_remap_file_pages 234
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_mbind 235
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_get_mempolicy 236
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_set_mempolicy 237
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_migrate_pages 238
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
+#define __NR_move_pages 239
+__SYSCALL(__NR_move_pages, sys_move_pages)
+#endif
+
+#undef __NR_syscalls
+#define __NR_syscalls 240
+
+/*
+ * All syscalls below here should go away really,
+ * these are provided for both review and as a porting
+ * help for the C library version.
+*
+ * Last chance: are any of these important enought to
+ * enable by default?
+ */
+#ifdef __ARCH_WANT_SYSCALL_NO_AT
+#define __NR_open 1024
+__SYSCALL(__NR_open, sys_open)
+#define __NR_link 1025
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink 1026
+__SYSCALL(__NR_unlink, sys_unlink)
+#define __NR_mknod 1027
+__SYSCALL(__NR_mknod, sys_mknod)
+#define __NR_chmod 1028
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_chown 1029
+__SYSCALL(__NR_chown, sys_chown)
+#define __NR_mkdir 1030
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir 1031
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_lchown 1032
+__SYSCALL(__NR_lchown, sys_lchown)
+#define __NR_access 1033
+__SYSCALL(__NR_access, sys_access)
+#define __NR_rename 1034
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_readlink 1035
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_symlink 1036
+__SYSCALL(__NR_symlink, sys_symlink)
+#define __NR_utimes 1037
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR3264_stat 1038
+__SC_3264(__NR3264_stat, sys_stat64, sys_newstat)
+#define __NR3264_lstat 1039
+__SC_3264(__NR3264_lstat, sys_lstat64, sys_newlstat)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR3264_lstat+1)
+#endif /* __ARCH_WANT_SYSCALL_NO_AT */
+
+#ifdef __ARCH_WANT_SYSCALL_NO_FLAGS
+#define __NR_pipe 1040
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_dup2 1041
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_epoll_create 1042
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_inotify_init 1043
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_eventfd 1044
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_signalfd 1045
+__SYSCALL(__NR_signalfd, sys_signalfd)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_signalfd+1)
+#endif /* __ARCH_WANT_SYSCALL_NO_FLAGS */
+
+#if __BITS_PER_LONG == 32 && defined(__ARCH_WANT_SYSCALL_OFF_T)
+#define __NR_sendfile 1046
+__SYSCALL(__NR_sendfile, sys_sendfile)
+#define __NR_ftruncate 1047
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_truncate 1048
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_stat 1049
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_lstat 1050
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_fstat 1051
+__SYSCALL(__NR_fstat, sys_newfstat)
+#define __NR_fcntl 1052
+__SYSCALL(__NR_fcntl, sys_fcntl)
+#define __NR_fadvise64 1053
+#define __ARCH_WANT_SYS_FADVISE64
+__SYSCALL(__NR_fadvise64, sys_fadvise64)
+#define __NR_newfstatat 1054
+#define __ARCH_WANT_SYS_NEWFSTATAT
+__SYSCALL(__NR_newfstatat, sys_newfstatat)
+#define __NR_fstatfs 1055
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+#define __NR_statfs 1056
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_lseek 1057
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_mmap 1058
+__SYSCALL(__NR_mmap, sys_mmap)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_mmap+1)
+#endif /* 32 bit off_t syscalls */
+
+#ifdef __ARCH_WANT_SYSCALL_DEPRECATED
+#define __NR_alarm 1059
+#define __ARCH_WANT_SYS_ALARM
+__SYSCALL(__NR_alarm, sys_alarm)
+#define __NR_getpgrp 1060
+#define __ARCH_WANT_SYS_GETPGRP
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+#define __NR_pause 1061
+#define __ARCH_WANT_SYS_PAUSE
+__SYSCALL(__NR_pause, sys_pause)
+#define __NR_time 1062
+#define __ARCH_WANT_SYS_TIME
+__SYSCALL(__NR_time, sys_time)
+#define __NR_utime 1063
+#define __ARCH_WANT_SYS_UTIME
+__SYSCALL(__NR_utime, sys_utime)
+
+#define __NR_creat 1064
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_getdents 1065
+#define __ARCH_WANT_SYS_GETDENTS
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR_futimesat 1066
+__SYSCALL(__NR_futimesat, sys_futimesat)
+#define __NR_select 1067
+#define __ARCH_WANT_SYS_SELECT
+__SYSCALL(__NR_select, sys_select)
+#define __NR_poll 1068
+__SYSCALL(__NR_poll, sys_poll)
+#define __NR_epoll_wait 1069
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_ustat 1070
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_vfork 1071
+__SYSCALL(__NR_vfork, sys_vfork)
+#define __NR_wait4 1072
+__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_recv 1073
+__SYSCALL(__NR_recv, sys_recv)
+#define __NR_send 1074
+__SYSCALL(__NR_send, sys_send)
+#define __NR_bdflush 1075
+__SYSCALL(__NR_bdflush, sys_bdflush)
+#define __NR_umount 1076
+__SYSCALL(__NR_umount, sys_oldumount)
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __NR_uselib 1077
+__SYSCALL(__NR_uselib, sys_uselib)
+#define __NR__sysctl 1078
+__SYSCALL(__NR__sysctl, sys_sysctl)
+
+#define __NR_fork 1079
+#ifdef CONFIG_MMU
+__SYSCALL(__NR_fork, sys_fork)
+#else
+__SYSCALL(__NR_fork, sys_ni_syscall)
+#endif /* CONFIG_MMU */
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_fork+1)
+
+#endif /* __ARCH_WANT_SYSCALL_DEPRECATED */
+
+/*
+ * 32 bit systems traditionally used different
+ * syscalls for off_t and loff_t arguments, while
+ * 64 bit systems only need the off_t version.
+ * For new 32 bit platforms, there is no need to
+ * implement the old 32 bit off_t syscalls, so
+ * they take different names.
+ * Here we map the numbers so that both versions
+ * use the same syscall table layout.
+ */
+#if __BITS_PER_LONG == 64
+#define __NR_fcntl __NR3264_fcntl
+#define __NR_statfs __NR3264_statfs
+#define __NR_fstatfs __NR3264_fstatfs
+#define __NR_truncate __NR3264_truncate
+#define __NR_ftruncate __NR3264_truncate
+#define __NR_lseek __NR3264_lseek
+#define __NR_sendfile __NR3264_sendfile
+#define __NR_newfstatat __NR3264_fstatat
+#define __NR_fstat __NR3264_fstat
+#define __NR_mmap __NR3264_mmap
+#define __NR_fadvise64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat __NR3264_stat
+#define __NR_lstat __NR3264_lstat
+#endif
+#else
+#define __NR_fcntl64 __NR3264_fcntl
+#define __NR_statfs64 __NR3264_statfs
+#define __NR_fstatfs64 __NR3264_fstatfs
+#define __NR_truncate64 __NR3264_truncate
+#define __NR_ftruncate64 __NR3264_truncate
+#define __NR_llseek __NR3264_lseek
+#define __NR_sendfile64 __NR3264_sendfile
+#define __NR_fstatat64 __NR3264_fstatat
+#define __NR_fstat64 __NR3264_fstat
+#define __NR_mmap2 __NR3264_mmap
+#define __NR_fadvise64_64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat64 __NR3264_stat
+#define __NR_lstat64 __NR3264_lstat
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * These are required system calls, we should
+ * invert the logic eventually and let them
+ * be selected by default.
+ */
+#if __BITS_PER_LONG == 32
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_LLSEEK
+#endif
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_UNISTD_H */
diff --git a/include/asm-generic/user.h b/include/asm-generic/user.h
new file mode 100644
index 00000000000..8b9c3c960ae
--- /dev/null
+++ b/include/asm-generic/user.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_USER_H
+#define __ASM_GENERIC_USER_H
+/*
+ * This file may define a 'struct user' structure. However, it it only
+ * used for a.out file, which are not supported on new architectures.
+ */
+
+#endif	/* __ASM_GENERIC_USER_H */
diff --git a/include/asm-generic/vga.h b/include/asm-generic/vga.h
new file mode 100644
index 00000000000..36c8ff52016
--- /dev/null
+++ b/include/asm-generic/vga.h
@@ -0,0 +1,24 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef __ASM_GENERIC_VGA_H
+#define __ASM_GENERIC_VGA_H
+
+/*
+ *	On most architectures that support VGA, we can just
+ *	recalculate addresses and then access the videoram
+ *	directly without any black magic.
+ *
+ *	Everyone else needs to ioremap the address and use
+ *	proper I/O accesses.
+ */
+#ifndef VGA_MAP_MEM
+#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
+#endif
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#endif /* _ASM_GENERIC_VGA_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 89853bcd27a..f1736ca7922 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -63,7 +63,7 @@
 #define BRANCH_PROFILE()
 #endif
 
-#ifdef CONFIG_EVENT_TRACER
+#ifdef CONFIG_EVENT_TRACING
 #define FTRACE_EVENTS()	VMLINUX_SYMBOL(__start_ftrace_events) = .;	\
 			*(_ftrace_events)				\
 			VMLINUX_SYMBOL(__stop_ftrace_events) = .;
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index c8c42215143..d4ddc22e46b 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -86,7 +86,17 @@ struct drm_device;
 
 #include "drm_os_linux.h"
 #include "drm_hashtab.h"
+#include "drm_mm.h"
 
+#define DRM_UT_CORE 		0x01
+#define DRM_UT_DRIVER		0x02
+#define DRM_UT_KMS		0x04
+#define DRM_UT_MODE		0x08
+
+extern void drm_ut_debug_printk(unsigned int request_level,
+				const char *prefix,
+				const char *function_name,
+				const char *format, ...);
 /***********************************************************************/
 /** \name DRM template customization defaults */
 /*@{*/
@@ -186,15 +196,57 @@ struct drm_device;
  * \param arg arguments
  */
 #if DRM_DEBUG_CODE
-#define DRM_DEBUG(fmt, arg...)						\
+#define DRM_DEBUG(fmt, args...)						\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_CORE, DRM_NAME, 		\
+					__func__, fmt, ##args);		\
+	} while (0)
+
+#define DRM_DEBUG_DRIVER(prefix, fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_DRIVER, prefix,		\
+					__func__, fmt, ##args);		\
+	} while (0)
+#define DRM_DEBUG_KMS(prefix, fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_KMS, prefix, 		\
+					 __func__, fmt, ##args);	\
+	} while (0)
+#define DRM_DEBUG_MODE(prefix, fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_MODE, prefix, 		\
+					 __func__, fmt, ##args);	\
+	} while (0)
+#define DRM_LOG(fmt, args...)						\
 	do {								\
-		if ( drm_debug )			\
-			printk(KERN_DEBUG				\
-			       "[" DRM_NAME ":%s] " fmt ,	\
-			       __func__ , ##arg);			\
+		drm_ut_debug_printk(DRM_UT_CORE, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_KMS(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_KMS, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_MODE(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_MODE, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_DRIVER(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_DRIVER, NULL,		\
+					NULL, fmt, ##args);		\
 	} while (0)
 #else
+#define DRM_DEBUG_DRIVER(prefix, fmt, args...) do { } while (0)
+#define DRM_DEBUG_KMS(prefix, fmt, args...)	do { } while (0)
+#define DRM_DEBUG_MODE(prefix, fmt, args...)	do { } while (0)
 #define DRM_DEBUG(fmt, arg...)		 do { } while (0)
+#define DRM_LOG(fmt, arg...)		do { } while (0)
+#define DRM_LOG_KMS(fmt, args...) do { } while (0)
+#define DRM_LOG_MODE(fmt, arg...) do { } while (0)
+#define DRM_LOG_DRIVER(fmt, arg...) do { } while (0)
+
 #endif
 
 #define DRM_PROC_LIMIT (PAGE_SIZE-80)
@@ -237,15 +289,15 @@ struct drm_device;
  * \param dev DRM device.
  * \param filp file pointer of the caller.
  */
-#define LOCK_TEST_WITH_RETURN( dev, file_priv )				\
-do {									\
-	if (!_DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock) ||		\
-	    file_priv->master->lock.file_priv != file_priv)	{			\
+#define LOCK_TEST_WITH_RETURN( dev, _file_priv )				\
+do {										\
+	if (!_DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock) ||	\
+	    _file_priv->master->lock.file_priv != _file_priv)	{		\
 		DRM_ERROR( "%s called without lock held, held  %d owner %p %p\n",\
-			   __func__, _DRM_LOCK_IS_HELD(file_priv->master->lock.hw_lock->lock),\
-			   file_priv->master->lock.file_priv, file_priv);		\
-		return -EINVAL;						\
-	}								\
+			   __func__, _DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock),\
+			   _file_priv->master->lock.file_priv, _file_priv);	\
+		return -EINVAL;							\
+	}									\
 } while (0)
 
 /**
@@ -502,26 +554,6 @@ struct drm_sigdata {
 };
 
 
-/*
- * Generic memory manager structs
- */
-
-struct drm_mm_node {
-	struct list_head fl_entry;
-	struct list_head ml_entry;
-	int free;
-	unsigned long start;
-	unsigned long size;
-	struct drm_mm *mm;
-	void *private;
-};
-
-struct drm_mm {
-	struct list_head fl_entry;
-	struct list_head ml_entry;
-};
-
-
 /**
  * Kernel side of a mapping
  */
@@ -1385,22 +1417,6 @@ extern char *drm_get_connector_status_name(enum drm_connector_status status);
 extern int drm_sysfs_connector_add(struct drm_connector *connector);
 extern void drm_sysfs_connector_remove(struct drm_connector *connector);
 
-/*
- * Basic memory manager support (drm_mm.c)
- */
-extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
-				       unsigned long size,
-				       unsigned alignment);
-extern void drm_mm_put_block(struct drm_mm_node * cur);
-extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, unsigned long size,
-					 unsigned alignment, int best_match);
-extern int drm_mm_init(struct drm_mm *mm, unsigned long start, unsigned long size);
-extern void drm_mm_takedown(struct drm_mm *mm);
-extern int drm_mm_clean(struct drm_mm *mm);
-extern unsigned long drm_mm_tail_space(struct drm_mm *mm);
-extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size);
-extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size);
-
 /* Graphics Execution Manager library functions (drm_gem.c) */
 int drm_gem_init(struct drm_device *dev);
 void drm_gem_destroy(struct drm_device *dev);
@@ -1519,6 +1535,26 @@ static __inline__ void *drm_calloc(size_t nmemb, size_t size, int area)
 {
 	return kcalloc(nmemb, size, GFP_KERNEL);
 }
+
+static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
+{
+	if (size * nmemb <= PAGE_SIZE)
+	    return kcalloc(nmemb, size, GFP_KERNEL);
+
+	if (size != 0 && nmemb > ULONG_MAX / size)
+		return NULL;
+
+	return __vmalloc(size * nmemb,
+			 GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+}
+
+static __inline void drm_free_large(void *ptr)
+{
+	if (!is_vmalloc_addr(ptr))
+		return kfree(ptr);
+
+	vfree(ptr);
+}
 #else
 extern void *drm_alloc(size_t size, int area);
 extern void drm_free(void *pt, size_t size, int area);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 3c1924c010e..7300fb86676 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -471,6 +471,9 @@ struct drm_connector {
 	u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY];
 	uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY];
 
+	/* requested DPMS state */
+	int dpms;
+
 	void *helper_private;
 
 	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index ec073d8288d..6769ff6c1bc 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -99,6 +99,8 @@ extern bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 				     struct drm_framebuffer *old_fb);
 extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc);
 
+extern void drm_helper_connector_dpms(struct drm_connector *connector, int mode);
+
 extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
 					  struct drm_mode_fb_cmd *mode_cmd);
 
diff --git a/include/drm/drm_hashtab.h b/include/drm/drm_hashtab.h
index cd2b189e1be..0af087a4d3b 100644
--- a/include/drm/drm_hashtab.h
+++ b/include/drm/drm_hashtab.h
@@ -35,6 +35,8 @@
 #ifndef DRM_HASHTAB_H
 #define DRM_HASHTAB_H
 
+#include <linux/list.h>
+
 #define drm_hash_entry(_ptr, _type, _member) container_of(_ptr, _type, _member)
 
 struct drm_hash_item {
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
new file mode 100644
index 00000000000..5662f4278ef
--- /dev/null
+++ b/include/drm/drm_mm.h
@@ -0,0 +1,90 @@
+/**************************************************************************
+ *
+ * Copyright 2006-2008 Tungsten Graphics, Inc., Cedar Park, TX. USA.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Authors:
+ * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef _DRM_MM_H_
+#define _DRM_MM_H_
+
+/*
+ * Generic range manager structs
+ */
+#include <linux/list.h>
+
+struct drm_mm_node {
+	struct list_head fl_entry;
+	struct list_head ml_entry;
+	int free;
+	unsigned long start;
+	unsigned long size;
+	struct drm_mm *mm;
+	void *private;
+};
+
+struct drm_mm {
+	struct list_head fl_entry;
+	struct list_head ml_entry;
+	struct list_head unused_nodes;
+	int num_unused;
+	spinlock_t unused_lock;
+};
+
+/*
+ * Basic range manager support (drm_mm.c)
+ */
+
+extern struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *parent,
+					    unsigned long size,
+					    unsigned alignment);
+extern struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+						   unsigned long size,
+						   unsigned alignment);
+extern void drm_mm_put_block(struct drm_mm_node *cur);
+extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
+					      unsigned long size,
+					      unsigned alignment,
+					      int best_match);
+extern int drm_mm_init(struct drm_mm *mm, unsigned long start,
+		       unsigned long size);
+extern void drm_mm_takedown(struct drm_mm *mm);
+extern int drm_mm_clean(struct drm_mm *mm);
+extern unsigned long drm_mm_tail_space(struct drm_mm *mm);
+extern int drm_mm_remove_space_from_tail(struct drm_mm *mm,
+					 unsigned long size);
+extern int drm_mm_add_space_to_tail(struct drm_mm *mm,
+				    unsigned long size, int atomic);
+extern int drm_mm_pre_get(struct drm_mm *mm);
+
+static inline struct drm_mm *drm_get_mm(struct drm_mm_node *block)
+{
+	return block->mm;
+}
+
+#endif
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index fc55db78019..f8634ab53b8 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -254,6 +254,11 @@
 	{0x1002, 0x940A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x940B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
@@ -268,6 +273,8 @@
 	{0x1002, 0x9456, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x947A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -536,4 +543,6 @@
 	{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0042, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0046, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0, 0, 0}
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 95962fa8398..8e1e92583fb 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -184,6 +184,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_I915_GEM_GET_TILING	0x22
 #define DRM_I915_GEM_GET_APERTURE 0x23
 #define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -219,6 +220,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
 #define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
 #define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying
  * on the security mechanisms provided by hardware.
@@ -657,4 +659,12 @@ struct drm_i915_gem_get_aperture {
 	__u64 aper_available_size;
 };
 
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
 #endif				/* _I915_DRM_H_ */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 3f0eaa397ef..b3afd2219ad 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -135,6 +135,7 @@ header-y += posix_types.h
 header-y += ppdev.h
 header-y += prctl.h
 header-y += qnxtypes.h
+header-y += qnx4_fs.h
 header-y += radeonfb.h
 header-y += raw.h
 header-y += resource.h
@@ -308,7 +309,6 @@ unifdef-y += poll.h
 unifdef-y += ppp_defs.h
 unifdef-y += ppp-comp.h
 unifdef-y += ptrace.h
-unifdef-y += qnx4_fs.h
 unifdef-y += quota.h
 unifdef-y += random.h
 unifdef-y += irqnr.h
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 88be890ee3c..51b4b0a5ce8 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -119,7 +119,7 @@ extern int pci_mmcfg_config_num;
 extern int sbf_port;
 extern unsigned long acpi_realmode_flags;
 
-int acpi_register_gsi (u32 gsi, int triggering, int polarity);
+int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
 #ifdef CONFIG_X86_IO_APIC
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 51e6e54b2aa..9b93cafa82a 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -28,7 +28,7 @@ struct amba_id {
 
 struct amba_driver {
 	struct device_driver	drv;
-	int			(*probe)(struct amba_device *, void *);
+	int			(*probe)(struct amba_device *, struct amba_id *);
 	int			(*remove)(struct amba_device *);
 	void			(*shutdown)(struct amba_device *);
 	int			(*suspend)(struct amba_device *, pm_message_t);
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 00000000000..dcad0ffd175
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,264 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+	LOOPBACK_DISABLED,
+	LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+	SSP_INTERFACE_MOTOROLA_SPI,
+	SSP_INTERFACE_TI_SYNC_SERIAL,
+	SSP_INTERFACE_NATIONAL_MICROWIRE,
+	SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+	SSP_MASTER,
+	SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+	u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+	u8 scr;	    /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+	SSP_RX_MSB,
+	SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+	SSP_TX_MSB,
+	SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+	SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+	SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+	SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+	SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+	SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+	SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+	SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+	SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+	SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+	SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+	INTERRUPT_TRANSFER,
+	POLLING_TRANSFER,
+	DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+	SSP_RX_1_OR_MORE_ELEM,
+	SSP_RX_4_OR_MORE_ELEM,
+	SSP_RX_8_OR_MORE_ELEM,
+	SSP_RX_16_OR_MORE_ELEM,
+	SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+	SSP_TX_1_OR_MORE_EMPTY_LOC,
+	SSP_TX_4_OR_MORE_EMPTY_LOC,
+	SSP_TX_8_OR_MORE_EMPTY_LOC,
+	SSP_TX_16_OR_MORE_EMPTY_LOC,
+	SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+	SSP_CLK_RISING_EDGE,
+	SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+	SSP_CLK_POL_IDLE_LOW,
+	SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+	SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+	SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+	SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+	SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+	SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+	SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+	SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+	SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+	SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+	SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+	SSP_MWIRE_WAIT_ZERO,
+	SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ *     SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ *     an input.
+ */
+enum ssp_duplex {
+	SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+	SSP_CHIP_SELECT,
+	SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *     SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *     each slave has a chipselect signal, but it's common that not
+ *     every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+	u16 bus_id;
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+	struct device *dev;
+	enum ssp_loopback lbm;
+	enum ssp_interface iface;
+	enum ssp_hierarchy hierarchy;
+	bool slave_tx_disable;
+	struct ssp_clock_params clk_freq;
+	enum ssp_rx_endian endian_rx;
+	enum ssp_tx_endian endian_tx;
+	enum ssp_data_size data_size;
+	enum ssp_mode com_mode;
+	enum ssp_rx_level_trig rx_lev_trig;
+	enum ssp_tx_level_trig tx_lev_trig;
+	enum ssp_spi_clk_phase clk_phase;
+	enum ssp_spi_clk_pol clk_pol;
+	enum ssp_microwire_ctrl_len ctrl_len;
+	enum ssp_microwire_wait_state wait_state;
+	enum ssp_duplex duplex;
+	void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 48ee32a18ac..5a5a7fd6249 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
 #define UART011_IFLS_TX4_8	(2 << 0)
 #define UART011_IFLS_TX6_8	(3 << 0)
 #define UART011_IFLS_TX7_8	(4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF	(5 << 3)
+#define UART011_IFLS_TX_HALF	(5 << 0)
 
 #define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
 #define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
@@ -159,6 +162,7 @@
 #define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
 
 #ifndef __ASSEMBLY__
+struct amba_device; /* in uncompress this is included but amba/bus.h is not */
 struct amba_pl010_data {
 	void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
 };
diff --git a/include/linux/ata.h b/include/linux/ata.h
index cb79b7a208e..915da43edee 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -730,6 +730,34 @@ static inline int ata_id_has_unload(const u16 *id)
 	return 0;
 }
 
+static inline int ata_id_form_factor(const u16 *id)
+{
+	u16 val = id[168];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	val &= 0xf;
+
+	if (val > 5)
+		return 0;
+
+	return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+	u16 val = id[217];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	if (val > 1 && val < 0x401)
+		return 0;
+
+	return val;
+}
+
 static inline int ata_id_has_trim(const u16 *id)
 {
 	if (ata_id_major_version(id) >= 7 &&
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 2f1f95737ac..57b1846a3c8 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -10,6 +10,7 @@
  * @bus_width: Number of data lines wired up the slot
  * @detect_pin: GPIO pin wired to the card detect switch
  * @wp_pin: GPIO pin wired to the write protect sensor
+ * @detect_is_active_high: The state of the detect pin when it is active
  *
  * If a given slot is not present on the board, @bus_width should be
  * set to 0. The other fields are ignored in this case.
@@ -24,6 +25,7 @@ struct mci_slot_pdata {
 	unsigned int		bus_width;
 	int			detect_pin;
 	int			wp_pin;
+	bool			detect_is_active_high;
 };
 
 /**
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index 63265852b7d..7b09c8348fd 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -14,13 +14,12 @@
 #ifndef _LINUX_AUTO_FS_H
 #define _LINUX_AUTO_FS_H
 
+#include <linux/types.h>
 #ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/limits.h>
-#include <linux/types.h>
 #include <linux/ioctl.h>
 #else
-#include <asm/types.h>
 #include <sys/ioctl.h>
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 7b214fd672a..12737be5860 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -218,12 +218,12 @@ struct bio {
 #define bio_sectors(bio)	((bio)->bi_size >> 9)
 #define bio_empty_barrier(bio)	(bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio))
 
-static inline unsigned int bio_cur_sectors(struct bio *bio)
+static inline unsigned int bio_cur_bytes(struct bio *bio)
 {
 	if (bio->bi_vcnt)
-		return bio_iovec(bio)->bv_len >> 9;
+		return bio_iovec(bio)->bv_len;
 	else /* dataless requests such as discard */
-		return bio->bi_size >> 9;
+		return bio->bi_size;
 }
 
 static inline void *bio_data(struct bio *bio)
@@ -279,7 +279,7 @@ static inline int bio_has_allocated_vec(struct bio *bio)
 #define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
 	(((addr1) | (mask)) == (((addr2) - 1) | (mask)))
 #define BIOVEC_SEG_BOUNDARY(q, b1, b2) \
-	__BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, (q)->seg_boundary_mask)
+	__BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, queue_segment_boundary((q)))
 #define BIO_SEG_BOUNDARY(q, b1, b2) \
 	BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2)))
 
@@ -506,7 +506,7 @@ static inline int bio_has_data(struct bio *bio)
 }
 
 /*
- * BIO list managment for use by remapping drivers (e.g. DM or MD).
+ * BIO list management for use by remapping drivers (e.g. DM or MD) and loop.
  *
  * A bio_list anchors a singly-linked list of bios chained through the bi_next
  * member of the bio.  The bio_list also caches the last list member to allow
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index b4f71f1a4af..0b1a6cae9de 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -166,19 +166,9 @@ struct request {
 	enum rq_cmd_type_bits cmd_type;
 	unsigned long atomic_flags;
 
-	/* Maintain bio traversal state for part by part I/O submission.
-	 * hard_* are block layer internals, no driver should touch them!
-	 */
-
-	sector_t sector;		/* next sector to submit */
-	sector_t hard_sector;		/* next sector to complete */
-	unsigned long nr_sectors;	/* no. of sectors left to submit */
-	unsigned long hard_nr_sectors;	/* no. of sectors left to complete */
-	/* no. of sectors left to submit in the current segment */
-	unsigned int current_nr_sectors;
-
-	/* no. of sectors left to complete in the current segment */
-	unsigned int hard_cur_sectors;
+	/* the following two fields are internal, NEVER access directly */
+	sector_t __sector;		/* sector cursor */
+	unsigned int __data_len;	/* total data len */
 
 	struct bio *bio;
 	struct bio *biotail;
@@ -211,8 +201,8 @@ struct request {
 
 	unsigned short ioprio;
 
-	void *special;
-	char *buffer;
+	void *special;		/* opaque pointer available for LLD use */
+	char *buffer;		/* kaddr of the current segment if available */
 
 	int tag;
 	int errors;
@@ -226,10 +216,9 @@ struct request {
 	unsigned char __cmd[BLK_MAX_CDB];
 	unsigned char *cmd;
 
-	unsigned int data_len;
 	unsigned int extra_len;	/* length of alignment and padding */
 	unsigned int sense_len;
-	void *data;
+	unsigned int resid_len;	/* residual count */
 	void *sense;
 
 	unsigned long deadline;
@@ -318,6 +307,26 @@ struct blk_cmd_filter {
 	struct kobject kobj;
 };
 
+struct queue_limits {
+	unsigned long		bounce_pfn;
+	unsigned long		seg_boundary_mask;
+
+	unsigned int		max_hw_sectors;
+	unsigned int		max_sectors;
+	unsigned int		max_segment_size;
+	unsigned int		physical_block_size;
+	unsigned int		alignment_offset;
+	unsigned int		io_min;
+	unsigned int		io_opt;
+
+	unsigned short		logical_block_size;
+	unsigned short		max_hw_segments;
+	unsigned short		max_phys_segments;
+
+	unsigned char		misaligned;
+	unsigned char		no_cluster;
+};
+
 struct request_queue
 {
 	/*
@@ -369,7 +378,6 @@ struct request_queue
 	/*
 	 * queue needs bounce pages for pages above this limit
 	 */
-	unsigned long		bounce_pfn;
 	gfp_t			bounce_gfp;
 
 	/*
@@ -398,14 +406,6 @@ struct request_queue
 	unsigned int		nr_congestion_off;
 	unsigned int		nr_batching;
 
-	unsigned int		max_sectors;
-	unsigned int		max_hw_sectors;
-	unsigned short		max_phys_segments;
-	unsigned short		max_hw_segments;
-	unsigned short		hardsect_size;
-	unsigned int		max_segment_size;
-
-	unsigned long		seg_boundary_mask;
 	void			*dma_drain_buffer;
 	unsigned int		dma_drain_size;
 	unsigned int		dma_pad_mask;
@@ -415,12 +415,14 @@ struct request_queue
 	struct list_head	tag_busy_list;
 
 	unsigned int		nr_sorted;
-	unsigned int		in_flight;
+	unsigned int		in_flight[2];
 
 	unsigned int		rq_timeout;
 	struct timer_list	timeout;
 	struct list_head	timeout_list;
 
+	struct queue_limits	limits;
+
 	/*
 	 * sg stuff
 	 */
@@ -522,6 +524,11 @@ static inline void queue_flag_clear_unlocked(unsigned int flag,
 	__clear_bit(flag, &q->queue_flags);
 }
 
+static inline int queue_in_flight(struct request_queue *q)
+{
+	return q->in_flight[0] + q->in_flight[1];
+}
+
 static inline void queue_flag_clear(unsigned int flag, struct request_queue *q)
 {
 	WARN_ON_ONCE(!queue_is_locked(q));
@@ -752,10 +759,17 @@ extern void blk_rq_init(struct request_queue *q, struct request *rq);
 extern void blk_put_request(struct request *);
 extern void __blk_put_request(struct request_queue *, struct request *);
 extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
+extern struct request *blk_make_request(struct request_queue *, struct bio *,
+					gfp_t);
 extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
 extern void blk_requeue_request(struct request_queue *, struct request *);
 extern int blk_rq_check_limits(struct request_queue *q, struct request *rq);
 extern int blk_lld_busy(struct request_queue *q);
+extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
+			     struct bio_set *bs, gfp_t gfp_mask,
+			     int (*bio_ctr)(struct bio *, struct bio *, void *),
+			     void *data);
+extern void blk_rq_unprep_clone(struct request *rq);
 extern int blk_insert_cloned_request(struct request_queue *q,
 				     struct request *rq);
 extern void blk_plug_device(struct request_queue *);
@@ -768,12 +782,6 @@ extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
 			 struct scsi_ioctl_command __user *);
 
 /*
- * Temporary export, until SCSI gets fixed up.
- */
-extern int blk_rq_append_bio(struct request_queue *q, struct request *rq,
-			     struct bio *bio);
-
-/*
  * A queue has just exitted congestion.  Note this in the global counter of
  * congested queues, and wake up anyone who was waiting for requests to be
  * put back.
@@ -798,7 +806,6 @@ extern void blk_sync_queue(struct request_queue *q);
 extern void __blk_stop_queue(struct request_queue *q);
 extern void __blk_run_queue(struct request_queue *);
 extern void blk_run_queue(struct request_queue *);
-extern void blk_start_queueing(struct request_queue *);
 extern int blk_rq_map_user(struct request_queue *, struct request *,
 			   struct rq_map_data *, void __user *, unsigned long,
 			   gfp_t);
@@ -831,41 +838,73 @@ static inline void blk_run_address_space(struct address_space *mapping)
 		blk_run_backing_dev(mapping->backing_dev_info, NULL);
 }
 
-extern void blkdev_dequeue_request(struct request *req);
+/*
+ * blk_rq_pos()		: the current sector
+ * blk_rq_bytes()	: bytes left in the entire request
+ * blk_rq_cur_bytes()	: bytes left in the current segment
+ * blk_rq_sectors()	: sectors left in the entire request
+ * blk_rq_cur_sectors()	: sectors left in the current segment
+ */
+static inline sector_t blk_rq_pos(const struct request *rq)
+{
+	return rq->__sector;
+}
+
+static inline unsigned int blk_rq_bytes(const struct request *rq)
+{
+	return rq->__data_len;
+}
+
+static inline int blk_rq_cur_bytes(const struct request *rq)
+{
+	return rq->bio ? bio_cur_bytes(rq->bio) : 0;
+}
+
+static inline unsigned int blk_rq_sectors(const struct request *rq)
+{
+	return blk_rq_bytes(rq) >> 9;
+}
+
+static inline unsigned int blk_rq_cur_sectors(const struct request *rq)
+{
+	return blk_rq_cur_bytes(rq) >> 9;
+}
+
+/*
+ * Request issue related functions.
+ */
+extern struct request *blk_peek_request(struct request_queue *q);
+extern void blk_start_request(struct request *rq);
+extern struct request *blk_fetch_request(struct request_queue *q);
 
 /*
- * blk_end_request() and friends.
- * __blk_end_request() and end_request() must be called with
- * the request queue spinlock acquired.
+ * Request completion related functions.
+ *
+ * blk_update_request() completes given number of bytes and updates
+ * the request without completing it.
+ *
+ * blk_end_request() and friends.  __blk_end_request() must be called
+ * with the request queue spinlock acquired.
  *
  * Several drivers define their own end_request and call
  * blk_end_request() for parts of the original function.
  * This prevents code duplication in drivers.
  */
-extern int blk_end_request(struct request *rq, int error,
-				unsigned int nr_bytes);
-extern int __blk_end_request(struct request *rq, int error,
-				unsigned int nr_bytes);
-extern int blk_end_bidi_request(struct request *rq, int error,
-				unsigned int nr_bytes, unsigned int bidi_bytes);
-extern void end_request(struct request *, int);
-extern int blk_end_request_callback(struct request *rq, int error,
-				unsigned int nr_bytes,
-				int (drv_callback)(struct request *));
+extern bool blk_update_request(struct request *rq, int error,
+			       unsigned int nr_bytes);
+extern bool blk_end_request(struct request *rq, int error,
+			    unsigned int nr_bytes);
+extern void blk_end_request_all(struct request *rq, int error);
+extern bool blk_end_request_cur(struct request *rq, int error);
+extern bool __blk_end_request(struct request *rq, int error,
+			      unsigned int nr_bytes);
+extern void __blk_end_request_all(struct request *rq, int error);
+extern bool __blk_end_request_cur(struct request *rq, int error);
+
 extern void blk_complete_request(struct request *);
 extern void __blk_complete_request(struct request *);
 extern void blk_abort_request(struct request *);
 extern void blk_abort_queue(struct request_queue *);
-extern void blk_update_request(struct request *rq, int error,
-			       unsigned int nr_bytes);
-
-/*
- * blk_end_request() takes bytes instead of sectors as a complete size.
- * blk_rq_bytes() returns bytes left to complete in the entire request.
- * blk_rq_cur_bytes() returns bytes left to complete in the current segment.
- */
-extern unsigned int blk_rq_bytes(struct request *rq);
-extern unsigned int blk_rq_cur_bytes(struct request *rq);
 
 /*
  * Access functions for manipulating queue properties
@@ -877,10 +916,20 @@ extern void blk_cleanup_queue(struct request_queue *);
 extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
 extern void blk_queue_bounce_limit(struct request_queue *, u64);
 extern void blk_queue_max_sectors(struct request_queue *, unsigned int);
+extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
 extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
-extern void blk_queue_hardsect_size(struct request_queue *, unsigned short);
+extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
+extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
+extern void blk_queue_alignment_offset(struct request_queue *q,
+				       unsigned int alignment);
+extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
+extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
+extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
+			    sector_t offset);
+extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
+			      sector_t offset);
 extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
 extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
 extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
@@ -967,19 +1016,87 @@ extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
 
-static inline int queue_hardsect_size(struct request_queue *q)
+static inline unsigned long queue_bounce_pfn(struct request_queue *q)
+{
+	return q->limits.bounce_pfn;
+}
+
+static inline unsigned long queue_segment_boundary(struct request_queue *q)
+{
+	return q->limits.seg_boundary_mask;
+}
+
+static inline unsigned int queue_max_sectors(struct request_queue *q)
+{
+	return q->limits.max_sectors;
+}
+
+static inline unsigned int queue_max_hw_sectors(struct request_queue *q)
+{
+	return q->limits.max_hw_sectors;
+}
+
+static inline unsigned short queue_max_hw_segments(struct request_queue *q)
+{
+	return q->limits.max_hw_segments;
+}
+
+static inline unsigned short queue_max_phys_segments(struct request_queue *q)
+{
+	return q->limits.max_phys_segments;
+}
+
+static inline unsigned int queue_max_segment_size(struct request_queue *q)
+{
+	return q->limits.max_segment_size;
+}
+
+static inline unsigned short queue_logical_block_size(struct request_queue *q)
 {
 	int retval = 512;
 
-	if (q && q->hardsect_size)
-		retval = q->hardsect_size;
+	if (q && q->limits.logical_block_size)
+		retval = q->limits.logical_block_size;
 
 	return retval;
 }
 
-static inline int bdev_hardsect_size(struct block_device *bdev)
+static inline unsigned short bdev_logical_block_size(struct block_device *bdev)
+{
+	return queue_logical_block_size(bdev_get_queue(bdev));
+}
+
+static inline unsigned int queue_physical_block_size(struct request_queue *q)
+{
+	return q->limits.physical_block_size;
+}
+
+static inline unsigned int queue_io_min(struct request_queue *q)
+{
+	return q->limits.io_min;
+}
+
+static inline unsigned int queue_io_opt(struct request_queue *q)
+{
+	return q->limits.io_opt;
+}
+
+static inline int queue_alignment_offset(struct request_queue *q)
+{
+	if (q && q->limits.misaligned)
+		return -1;
+
+	if (q && q->limits.alignment_offset)
+		return q->limits.alignment_offset;
+
+	return 0;
+}
+
+static inline int queue_sector_alignment_offset(struct request_queue *q,
+						sector_t sector)
 {
-	return queue_hardsect_size(bdev_get_queue(bdev));
+	return ((sector << 9) - q->limits.alignment_offset)
+		& (q->limits.io_min - 1);
 }
 
 static inline int queue_dma_alignment(struct request_queue *q)
@@ -1109,6 +1226,8 @@ struct block_device_operations {
 	int (*direct_access) (struct block_device *, sector_t,
 						void **, unsigned long *);
 	int (*media_changed) (struct gendisk *);
+	unsigned long long (*set_capacity) (struct gendisk *,
+						unsigned long long);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
 	struct module *owner;
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index d960889e92e..7e4350ece0f 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -116,9 +116,9 @@ struct blk_io_trace {
  * The remap event
  */
 struct blk_io_trace_remap {
-	__be32 device;
 	__be32 device_from;
-	__be64 sector;
+	__be32 device_to;
+	__be64 sector_from;
 };
 
 enum {
@@ -165,8 +165,9 @@ struct blk_trace {
 
 extern int blk_trace_ioctl(struct block_device *, unsigned, char __user *);
 extern void blk_trace_shutdown(struct request_queue *);
-extern int do_blk_trace_setup(struct request_queue *q,
-	char *name, dev_t dev, struct blk_user_trace_setup *buts);
+extern int do_blk_trace_setup(struct request_queue *q, char *name,
+			      dev_t dev, struct block_device *bdev,
+			      struct blk_user_trace_setup *buts);
 extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
 
 /**
@@ -193,22 +194,42 @@ extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
 extern void blk_add_driver_data(struct request_queue *q, struct request *rq,
 				void *data, size_t len);
 extern int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+			   struct block_device *bdev,
 			   char __user *arg);
 extern int blk_trace_startstop(struct request_queue *q, int start);
 extern int blk_trace_remove(struct request_queue *q);
+extern int blk_trace_init_sysfs(struct device *dev);
 
 extern struct attribute_group blk_trace_attr_group;
 
 #else /* !CONFIG_BLK_DEV_IO_TRACE */
-#define blk_trace_ioctl(bdev, cmd, arg)		(-ENOTTY)
-#define blk_trace_shutdown(q)			do { } while (0)
-#define do_blk_trace_setup(q, name, dev, buts)	(-ENOTTY)
-#define blk_add_driver_data(q, rq, data, len)	do {} while (0)
-#define blk_trace_setup(q, name, dev, arg)	(-ENOTTY)
-#define blk_trace_startstop(q, start)		(-ENOTTY)
-#define blk_trace_remove(q)			(-ENOTTY)
-#define blk_add_trace_msg(q, fmt, ...)		do { } while (0)
+# define blk_trace_ioctl(bdev, cmd, arg)		(-ENOTTY)
+# define blk_trace_shutdown(q)				do { } while (0)
+# define do_blk_trace_setup(q, name, dev, bdev, buts)	(-ENOTTY)
+# define blk_add_driver_data(q, rq, data, len)		do {} while (0)
+# define blk_trace_setup(q, name, dev, bdev, arg)	(-ENOTTY)
+# define blk_trace_startstop(q, start)			(-ENOTTY)
+# define blk_trace_remove(q)				(-ENOTTY)
+# define blk_add_trace_msg(q, fmt, ...)			do { } while (0)
+static inline int blk_trace_init_sysfs(struct device *dev)
+{
+	return 0;
+}
 
 #endif /* CONFIG_BLK_DEV_IO_TRACE */
+
+#if defined(CONFIG_EVENT_TRACING) && defined(CONFIG_BLOCK)
+
+static inline int blk_cmd_buf_len(struct request *rq)
+{
+	return blk_pc_request(rq) ? rq->cmd_len * 3 : 1;
+}
+
+extern void blk_dump_cmd(char *buf, struct request *rq);
+extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
+extern void blk_fill_rwbs_rq(char *rwbs, struct request *rq);
+
+#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
+
 #endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
new file mode 100644
index 00000000000..63bc9a4d292
--- /dev/null
+++ b/include/linux/cb710.h
@@ -0,0 +1,231 @@
+/*
+ *  cb710/cb710.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+	struct platform_device	pdev;
+	void __iomem		*iobase;
+	cb710_irq_handler_t	irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+	struct pci_dev		*pdev;
+	void __iomem		*iobase;
+	unsigned		platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_t		slot_refs_count;
+#endif
+	unsigned		slot_mask;
+	unsigned		slots;
+	spinlock_t		irq_lock;
+	struct cb710_slot	slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC		1
+#define CB710_SLOT_MS		2
+#define CB710_SLOT_SM		4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t value)					\
+{									\
+	iowrite##t(value, slot->iobase + port);				\
+}									\
+									\
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
+	unsigned port)							\
+{									\
+	return ioread##t(slot->iobase + port);				\
+}									\
+									\
+static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t set, u##t clear)				\
+{									\
+	iowrite##t(							\
+		(ioread##t(slot->iobase + port) & ~clear)|set,		\
+		slot->iobase + port);					\
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+	struct platform_device *pdev)
+{
+	return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+	return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+	return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC	0x0F
+#define CB710_DUMP_REGS_MS	0x30
+#define CB710_DUMP_REGS_SM	0xC0
+#define CB710_DUMP_REGS_ALL	0xFF
+#define CB710_DUMP_REGS_MASK	0xFF
+
+#define CB710_DUMP_ACCESS_8	0x100
+#define CB710_DUMP_ACCESS_16	0x200
+#define CB710_DUMP_ACCESS_32	0x400
+#define CB710_DUMP_ACCESS_ALL	0x700
+#define CB710_DUMP_ACCESS_MASK	0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ *  cb710/sgbuf2.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/**
+ * cb710_sg_miter_stop_writing - stop mapping iteration after writing
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ *   Stops mapping iterator @miter.  @miter should have been started
+ *   started using sg_miter_start().  A stopped iteration can be
+ *   resumed by calling sg_miter_next() on it.  This is useful when
+ *   resources (kmap) need to be released during iteration.
+ *
+ *   This is a convenience wrapper that will be optimized out for arches
+ *   that don't need flush_kernel_dcache_page().
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
+{
+	if (miter->page)
+		flush_kernel_dcache_page(miter->page);
+	sg_miter_stop(miter);
+}
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_write_from_io();
+ *   cb710_sg_miter_stop_writing();
+ *
+ * Best-case writing (transfer to device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_read_to_io();
+ *   sg_miter_stop();
+ */
+
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Reads @count 32-bit words from register @port and stores it in
+ *   buffer iterated by @miter.  Data that would overflow the buffer
+ *   is silently ignored.  Iterator is advanced by 4*@count bytes
+ *   or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Writes @count 32-bit words to register @port from buffer iterated
+ *   through @miter.  If buffer ends before @count words are written
+ *   missing data is replaced by zeroes. @miter is advanced by 4*@count
+ *   bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
index fb4591977b0..f389e319a45 100644
--- a/include/linux/cdev.h
+++ b/include/linux/cdev.h
@@ -28,6 +28,8 @@ int cdev_add(struct cdev *, dev_t, unsigned);
 
 void cdev_del(struct cdev *);
 
+int cdev_index(struct inode *inode);
+
 void cd_forget(struct inode *);
 
 extern struct backing_dev_info directly_mappable_cdev_bdi;
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf444a..1d37f42ac29 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk);
  */
 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+			struct device *dev);
+
 #endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 5a40d14daa9..c56457c8334 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -288,7 +288,15 @@ static inline cycle_t clocksource_read(struct clocksource *cs)
  */
 static inline int clocksource_enable(struct clocksource *cs)
 {
-	return cs->enable ? cs->enable(cs) : 0;
+	int ret = 0;
+
+	if (cs->enable)
+		ret = cs->enable(cs);
+
+	/* save mult_orig on enable */
+	cs->mult_orig = cs->mult;
+
+	return ret;
 }
 
 /**
diff --git a/include/linux/compat.h b/include/linux/compat.h
index f2ded21f9a3..af931ee43dd 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -222,6 +222,8 @@ int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from);
 int copy_siginfo_to_user32(struct compat_siginfo __user *to, siginfo_t *from);
 int get_compat_sigevent(struct sigevent *event,
 		const struct compat_sigevent __user *u_event);
+long compat_sys_rt_tgsigqueueinfo(compat_pid_t tgid, compat_pid_t pid, int sig,
+				  struct compat_siginfo __user *uinfo);
 
 static inline int compat_timeval_compare(struct compat_timeval *lhs,
 					struct compat_timeval *rhs)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 37bcb50a4d7..04fb5135b4e 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -261,6 +261,11 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+/* Are two types/vars the same type (ignoring qualifiers)? */
+#ifndef __same_type
+# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
+#endif
+
 /*
  * Prevent the compiler from merging or refetching accesses.  The compiler
  * is also forbidden from reordering successive instances of ACCESS_ONCE(),
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 9f315382610..c5ac87ca7bc 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -1022,6 +1022,8 @@ typedef struct cpumask *cpumask_var_t;
 
 bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
 bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
 void alloc_bootmem_cpumask_var(cpumask_var_t *mask);
 void free_cpumask_var(cpumask_var_t mask);
 void free_bootmem_cpumask_var(cpumask_var_t mask);
@@ -1040,6 +1042,19 @@ static inline bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
 	return true;
 }
 
+static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+	cpumask_clear(*mask);
+	return true;
+}
+
+static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
+					  int node)
+{
+	cpumask_clear(*mask);
+	return true;
+}
+
 static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask)
 {
 }
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 3be4e5a27d8..6fc2bed368b 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -2,9 +2,8 @@
 #define __CRAMFS_H
 
 #include <linux/types.h>
+#include <linux/magic.h>
 
-#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
-#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
 #define CRAMFS_SIGNATURE	"Compressed ROMFS"
 
 /*
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 3282ee4318e..4fa99969631 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -13,6 +13,7 @@
 #define _LINUX_CRED_H
 
 #include <linux/capability.h>
+#include <linux/init.h>
 #include <linux/key.h>
 #include <asm/atomic.h>
 
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 788850ba4e7..1fbdea4f08e 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -142,19 +142,6 @@ struct CYZ_BOOT_CTRL {
 
 
 #ifndef DP_WINDOW_SIZE
-/* #include "cyclomz.h" */
-/****************** ****************** *******************/
-/*
- *	The data types defined below are used in all ZFIRM interface
- *	data structures. They accomodate differences between HW
- *	architectures and compilers.
- */
-
-typedef __u64  ucdouble;		/* 64 bits, unsigned */
-typedef __u32  uclong;			/* 32 bits, unsigned */
-typedef __u16  ucshort;		/* 16 bits, unsigned */
-typedef __u8   ucchar;			/* 8 bits, unsigned */
-
 /*
  *	Memory Window Sizes
  */
@@ -507,16 +494,20 @@ struct ZFW_CTRL {
 
 /* Per card data structure */
 struct cyclades_card {
-    void __iomem *base_addr;
-    void __iomem *ctl_addr;
-    int irq;
-    unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
-    unsigned int first_line;	/* minor number of first channel on card */
-    unsigned int nports;	/* Number of ports in the card */
-    int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
-    int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
-    spinlock_t card_lock;
-    struct cyclades_port *ports;
+	void __iomem *base_addr;
+	union {
+		void __iomem *p9050;
+		struct RUNTIME_9060 __iomem *p9060;
+	} ctl_addr;
+	int irq;
+	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
+	unsigned int first_line;	/* minor number of first channel on card */
+	unsigned int nports;	/* Number of ports in the card */
+	int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
+	int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
+	u32 hw_ver;
+	spinlock_t card_lock;
+	struct cyclades_port *ports;
 };
 
 /***************************************
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 15156364d19..30b93b2a01a 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -180,10 +180,12 @@ d_iput:		no		no		no       yes
 #define DCACHE_REFERENCED	0x0008  /* Recently used, don't discard. */
 #define DCACHE_UNHASHED		0x0010	
 
-#define DCACHE_INOTIFY_PARENT_WATCHED	0x0020 /* Parent inode is watched */
+#define DCACHE_INOTIFY_PARENT_WATCHED	0x0020 /* Parent inode is watched by inotify */
 
 #define DCACHE_COOKIE		0x0040	/* For use by dcookie subsystem */
 
+#define DCACHE_FSNOTIFY_PARENT_WATCHED	0x0080 /* Parent inode is watched by some fsnotify listener */
+
 extern spinlock_t dcache_lock;
 extern seqlock_t rename_lock;
 
@@ -351,6 +353,11 @@ static inline int d_unhashed(struct dentry *dentry)
 	return (dentry->d_flags & DCACHE_UNHASHED);
 }
 
+static inline int d_unlinked(struct dentry *dentry)
+{
+	return d_unhashed(dentry) && !IS_ROOT(dentry);
+}
+
 static inline struct dentry *dget_parent(struct dentry *dentry)
 {
 	struct dentry *ret;
@@ -368,7 +375,7 @@ static inline int d_mountpoint(struct dentry *dentry)
 	return dentry->d_mounted;
 }
 
-extern struct vfsmount *lookup_mnt(struct vfsmount *, struct dentry *);
+extern struct vfsmount *lookup_mnt(struct path *);
 extern struct dentry *lookup_create(struct nameidata *nd, int is_dir);
 
 extern int sysctl_vfs_cache_pressure;
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index ded2d7c4266..49c2362977f 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -149,7 +149,7 @@ struct io_restrictions {
 	unsigned max_hw_sectors;
 	unsigned max_sectors;
 	unsigned max_segment_size;
-	unsigned short hardsect_size;
+	unsigned short logical_block_size;
 	unsigned short max_hw_segments;
 	unsigned short max_phys_segments;
 	unsigned char no_cluster; /* inverted so that 0 is default */
diff --git a/include/linux/device.h b/include/linux/device.h
index 5d5c197bad4..a4a7b10aaa4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -62,8 +62,6 @@ struct bus_type {
 	void (*shutdown)(struct device *dev);
 
 	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*suspend_late)(struct device *dev, pm_message_t state);
-	int (*resume_early)(struct device *dev);
 	int (*resume)(struct device *dev);
 
 	struct dev_pm_ops *pm;
@@ -291,9 +289,6 @@ struct device_type {
 	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	void (*release)(struct device *dev);
 
-	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*resume)(struct device *dev);
-
 	struct dev_pm_ops *pm;
 };
 
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index b9cd38603fd..0b3518c4235 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -81,8 +81,8 @@ struct dlm_lksb {
  * the cluster, the calling node joins it.
  */
 
-int dlm_new_lockspace(char *name, int namelen, dlm_lockspace_t **lockspace,
-		      uint32_t flags, int lvblen);
+int dlm_new_lockspace(const char *name, int namelen,
+		      dlm_lockspace_t **lockspace, uint32_t flags, int lvblen);
 
 /*
  * dlm_release_lockspace
diff --git a/include/linux/dma-debug.h b/include/linux/dma-debug.h
index 28d53cb7b5a..171ad8aedc8 100644
--- a/include/linux/dma-debug.h
+++ b/include/linux/dma-debug.h
@@ -32,6 +32,8 @@ extern void dma_debug_add_bus(struct bus_type *bus);
 
 extern void dma_debug_init(u32 num_entries);
 
+extern int dma_debug_resize_entries(u32 num_entries);
+
 extern void debug_dma_map_page(struct device *dev, struct page *page,
 			       size_t offset, size_t size,
 			       int direction, dma_addr_t dma_addr,
@@ -91,6 +93,11 @@ static inline void dma_debug_init(u32 num_entries)
 {
 }
 
+static inline int dma_debug_resize_entries(u32 num_entries)
+{
+	return 0;
+}
+
 static inline void debug_dma_map_page(struct device *dev, struct page *page,
 				      size_t offset, size_t size,
 				      int direction, dma_addr_t dma_addr,
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index e397dc342cd..10ff5c49882 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -108,6 +108,7 @@ struct irte {
 };
 #ifdef CONFIG_INTR_REMAP
 extern int intr_remapping_enabled;
+extern int intr_remapping_supported(void);
 extern int enable_intr_remapping(int);
 extern void disable_intr_remapping(void);
 extern int reenable_intr_remapping(int);
@@ -157,6 +158,8 @@ static inline struct intel_iommu *map_ioapic_to_ir(int apic)
 }
 #define irq_remapped(irq)		(0)
 #define enable_intr_remapping(mode)	(-1)
+#define disable_intr_remapping()	(0)
+#define reenable_intr_remapping(mode)	(0)
 #define intr_remapping_enabled		(0)
 #endif
 
diff --git a/include/linux/dnotify.h b/include/linux/dnotify.h
index 102a902b439..ecc06286226 100644
--- a/include/linux/dnotify.h
+++ b/include/linux/dnotify.h
@@ -10,7 +10,7 @@
 
 struct dnotify_struct {
 	struct dnotify_struct *	dn_next;
-	unsigned long		dn_mask;
+	__u32			dn_mask;
 	int			dn_fd;
 	struct file *		dn_filp;
 	fl_owner_t		dn_owner;
@@ -21,23 +21,18 @@ struct dnotify_struct {
 
 #ifdef CONFIG_DNOTIFY
 
-extern void __inode_dir_notify(struct inode *, unsigned long);
+#define DNOTIFY_ALL_EVENTS (FS_DELETE | FS_DELETE_CHILD |\
+			    FS_MODIFY | FS_MODIFY_CHILD |\
+			    FS_ACCESS | FS_ACCESS_CHILD |\
+			    FS_ATTRIB | FS_ATTRIB_CHILD |\
+			    FS_CREATE | FS_DN_RENAME |\
+			    FS_MOVED_FROM | FS_MOVED_TO)
+
 extern void dnotify_flush(struct file *, fl_owner_t);
 extern int fcntl_dirnotify(int, struct file *, unsigned long);
-extern void dnotify_parent(struct dentry *, unsigned long);
-
-static inline void inode_dir_notify(struct inode *inode, unsigned long event)
-{
-	if (inode->i_dnotify_mask & (event))
-		__inode_dir_notify(inode, event);
-}
 
 #else
 
-static inline void __inode_dir_notify(struct inode *inode, unsigned long event)
-{
-}
-
 static inline void dnotify_flush(struct file *filp, fl_owner_t id)
 {
 }
@@ -47,14 +42,6 @@ static inline int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
 	return -EINVAL;
 }
 
-static inline void dnotify_parent(struct dentry *dentry, unsigned long event)
-{
-}
-
-static inline void inode_dir_notify(struct inode *inode, unsigned long event)
-{
-}
-
 #endif /* CONFIG_DNOTIFY */
 
 #endif /* __KERNEL __ */
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index c59b769f62b..1cb3372e65d 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -103,10 +103,8 @@ extern int elv_merge(struct request_queue *, struct request **, struct bio *);
 extern void elv_merge_requests(struct request_queue *, struct request *,
 			       struct request *);
 extern void elv_merged_request(struct request_queue *, struct request *, int);
-extern void elv_dequeue_request(struct request_queue *, struct request *);
 extern void elv_requeue_request(struct request_queue *, struct request *);
 extern int elv_queue_empty(struct request_queue *);
-extern struct request *elv_next_request(struct request_queue *q);
 extern struct request *elv_former_request(struct request_queue *, struct request *);
 extern struct request *elv_latter_request(struct request_queue *, struct request *);
 extern int elv_register_queue(struct request_queue *q);
@@ -171,7 +169,7 @@ enum {
 	ELV_MQUEUE_MUST,
 };
 
-#define rq_end_sector(rq)	((rq)->sector + (rq)->nr_sectors)
+#define rq_end_sector(rq)	(blk_rq_pos(rq) + blk_rq_sectors(rq))
 #define rb_entry_rq(node)	rb_entry((node), struct request, rb_node)
 
 /*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3b534e527e0..ede84fa7da5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -729,8 +729,8 @@ struct inode {
 	struct timespec		i_atime;
 	struct timespec		i_mtime;
 	struct timespec		i_ctime;
-	unsigned int		i_blkbits;
 	blkcnt_t		i_blocks;
+	unsigned int		i_blkbits;
 	unsigned short          i_bytes;
 	umode_t			i_mode;
 	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
@@ -751,13 +751,12 @@ struct inode {
 		struct block_device	*i_bdev;
 		struct cdev		*i_cdev;
 	};
-	int			i_cindex;
 
 	__u32			i_generation;
 
-#ifdef CONFIG_DNOTIFY
-	unsigned long		i_dnotify_mask; /* Directory notify events */
-	struct dnotify_struct	*i_dnotify; /* for directory notifications */
+#ifdef CONFIG_FSNOTIFY
+	__u32			i_fsnotify_mask; /* all events this inode cares about */
+	struct hlist_head	i_fsnotify_mark_entries; /* fsnotify mark entries */
 #endif
 
 #ifdef CONFIG_INOTIFY
@@ -1321,7 +1320,7 @@ struct super_block {
 	struct rw_semaphore	s_umount;
 	struct mutex		s_lock;
 	int			s_count;
-	int			s_need_sync_fs;
+	int			s_need_sync;
 	atomic_t		s_active;
 #ifdef CONFIG_SECURITY
 	void                    *s_security;
@@ -1372,11 +1371,6 @@ struct super_block {
 	 * generic_show_options()
 	 */
 	char *s_options;
-
-	/*
-	 * storage for asynchronous operations
-	 */
-	struct list_head s_async_list;
 };
 
 extern struct timespec current_fs_time(struct super_block *sb);
@@ -1800,7 +1794,7 @@ extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data);
 extern int may_umount_tree(struct vfsmount *);
 extern int may_umount(struct vfsmount *);
 extern long do_mount(char *, char *, char *, unsigned long, void *);
-extern struct vfsmount *collect_mounts(struct vfsmount *, struct dentry *);
+extern struct vfsmount *collect_mounts(struct path *);
 extern void drop_collected_mounts(struct vfsmount *);
 
 extern int vfs_statfs(struct dentry *, struct kstatfs *);
@@ -1947,8 +1941,6 @@ extern struct super_block *freeze_bdev(struct block_device *);
 extern void emergency_thaw_all(void);
 extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
 extern int fsync_bdev(struct block_device *);
-extern int fsync_super(struct super_block *);
-extern int fsync_no_super(struct block_device *);
 #else
 static inline void bd_forget(struct inode *inode) {}
 static inline int sync_blockdev(struct block_device *bdev) { return 0; }
@@ -1964,6 +1956,7 @@ static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb)
 	return 0;
 }
 #endif
+extern int sync_filesystem(struct super_block *);
 extern const struct file_operations def_blk_fops;
 extern const struct file_operations def_chr_fops;
 extern const struct file_operations bad_sock_fops;
@@ -2082,12 +2075,8 @@ extern int filemap_fdatawrite_range(struct address_space *mapping,
 
 extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync);
 extern void sync_supers(void);
-extern void sync_filesystems(int wait);
-extern void __fsync_super(struct super_block *sb);
 extern void emergency_sync(void);
 extern void emergency_remount(void);
-extern int do_remount_sb(struct super_block *sb, int flags,
-			 void *data, int force);
 #ifdef CONFIG_BLOCK
 extern sector_t bmap(struct inode *, sector_t);
 #endif
@@ -2205,6 +2194,8 @@ extern int generic_segment_checks(const struct iovec *iov,
 /* fs/splice.c */
 extern ssize_t generic_file_splice_read(struct file *, loff_t *,
 		struct pipe_inode_info *, size_t, unsigned int);
+extern ssize_t default_file_splice_read(struct file *, loff_t *,
+		struct pipe_inode_info *, size_t, unsigned int);
 extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
 		struct file *, loff_t *, size_t, unsigned int);
 extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
@@ -2354,6 +2345,8 @@ extern void simple_release_fs(struct vfsmount **mount, int *count);
 extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
 			loff_t *ppos, const void *from, size_t available);
 
+extern int simple_fsync(struct file *, struct dentry *, int);
+
 #ifdef CONFIG_MIGRATION
 extern int buffer_migrate_page(struct address_space *,
 				struct page *, struct page *);
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 00fbd5b245c..936f9aa8bb9 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -13,6 +13,7 @@
 
 #include <linux/dnotify.h>
 #include <linux/inotify.h>
+#include <linux/fsnotify_backend.h>
 #include <linux/audit.h>
 
 /*
@@ -22,19 +23,45 @@
 static inline void fsnotify_d_instantiate(struct dentry *entry,
 						struct inode *inode)
 {
+	__fsnotify_d_instantiate(entry, inode);
+
 	inotify_d_instantiate(entry, inode);
 }
 
+/* Notify this dentry's parent about a child's events. */
+static inline void fsnotify_parent(struct dentry *dentry, __u32 mask)
+{
+	__fsnotify_parent(dentry, mask);
+
+	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
+}
+
 /*
  * fsnotify_d_move - entry has been moved
  * Called with dcache_lock and entry->d_lock held.
  */
 static inline void fsnotify_d_move(struct dentry *entry)
 {
+	/*
+	 * On move we need to update entry->d_flags to indicate if the new parent
+	 * cares about events from this entry.
+	 */
+	__fsnotify_update_dcache_flags(entry);
+
 	inotify_d_move(entry);
 }
 
 /*
+ * fsnotify_link_count - inode's link count changed
+ */
+static inline void fsnotify_link_count(struct inode *inode)
+{
+	inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL);
+
+	fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+}
+
+/*
  * fsnotify_move - file old_name at old_dir was moved to new_name at new_dir
  */
 static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
@@ -42,42 +69,62 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 				 int isdir, struct inode *target, struct dentry *moved)
 {
 	struct inode *source = moved->d_inode;
-	u32 cookie = inotify_get_cookie();
+	u32 in_cookie = inotify_get_cookie();
+	u32 fs_cookie = fsnotify_get_cookie();
+	__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
+	__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
 
 	if (old_dir == new_dir)
-		inode_dir_notify(old_dir, DN_RENAME);
-	else {
-		inode_dir_notify(old_dir, DN_DELETE);
-		inode_dir_notify(new_dir, DN_CREATE);
-	}
+		old_dir_mask |= FS_DN_RENAME;
 
-	if (isdir)
+	if (isdir) {
 		isdir = IN_ISDIR;
-	inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir,cookie,old_name,
+		old_dir_mask |= FS_IN_ISDIR;
+		new_dir_mask |= FS_IN_ISDIR;
+	}
+
+	inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir, in_cookie, old_name,
 				  source);
-	inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name,
+	inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, in_cookie, new_name,
 				  source);
 
+	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
+	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
+
 	if (target) {
 		inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL);
 		inotify_inode_is_dead(target);
+
+		/* this is really a link_count change not a removal */
+		fsnotify_link_count(target);
 	}
 
 	if (source) {
 		inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL);
+		fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 	}
 	audit_inode_child(new_name, moved, new_dir);
 }
 
 /*
+ * fsnotify_inode_delete - and inode is being evicted from cache, clean up is needed
+ */
+static inline void fsnotify_inode_delete(struct inode *inode)
+{
+	__fsnotify_inode_delete(inode);
+}
+
+/*
  * fsnotify_nameremove - a filename was removed from a directory
  */
 static inline void fsnotify_nameremove(struct dentry *dentry, int isdir)
 {
+	__u32 mask = FS_DELETE;
+
 	if (isdir)
-		isdir = IN_ISDIR;
-	dnotify_parent(dentry, DN_DELETE);
-	inotify_dentry_parent_queue_event(dentry, IN_DELETE|isdir, 0, dentry->d_name.name);
+		mask |= FS_IN_ISDIR;
+
+	fsnotify_parent(dentry, mask);
 }
 
 /*
@@ -87,14 +134,9 @@ static inline void fsnotify_inoderemove(struct inode *inode)
 {
 	inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL);
 	inotify_inode_is_dead(inode);
-}
 
-/*
- * fsnotify_link_count - inode's link count changed
- */
-static inline void fsnotify_link_count(struct inode *inode)
-{
-	inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL);
+	fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+	__fsnotify_inode_delete(inode);
 }
 
 /*
@@ -102,10 +144,11 @@ static inline void fsnotify_link_count(struct inode *inode)
  */
 static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
 {
-	inode_dir_notify(inode, DN_CREATE);
 	inotify_inode_queue_event(inode, IN_CREATE, 0, dentry->d_name.name,
 				  dentry->d_inode);
 	audit_inode_child(dentry->d_name.name, dentry, inode);
+
+	fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
 }
 
 /*
@@ -115,11 +158,12 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
  */
 static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
 {
-	inode_dir_notify(dir, DN_CREATE);
 	inotify_inode_queue_event(dir, IN_CREATE, 0, new_dentry->d_name.name,
 				  inode);
 	fsnotify_link_count(inode);
 	audit_inode_child(new_dentry->d_name.name, new_dentry, dir);
+
+	fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0);
 }
 
 /*
@@ -127,10 +171,13 @@ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct
  */
 static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
 {
-	inode_dir_notify(inode, DN_CREATE);
-	inotify_inode_queue_event(inode, IN_CREATE | IN_ISDIR, 0, 
-				  dentry->d_name.name, dentry->d_inode);
+	__u32 mask = (FS_CREATE | FS_IN_ISDIR);
+	struct inode *d_inode = dentry->d_inode;
+
+	inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode);
 	audit_inode_child(dentry->d_name.name, dentry, inode);
+
+	fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
 }
 
 /*
@@ -139,14 +186,15 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
 static inline void fsnotify_access(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_ACCESS;
+	__u32 mask = FS_ACCESS;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	dnotify_parent(dentry, DN_ACCESS);
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -155,14 +203,15 @@ static inline void fsnotify_access(struct dentry *dentry)
 static inline void fsnotify_modify(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_MODIFY;
+	__u32 mask = FS_MODIFY;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	dnotify_parent(dentry, DN_MODIFY);
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -171,13 +220,15 @@ static inline void fsnotify_modify(struct dentry *dentry)
 static inline void fsnotify_open(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_OPEN;
+	__u32 mask = FS_OPEN;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -187,15 +238,16 @@ static inline void fsnotify_close(struct file *file)
 {
 	struct dentry *dentry = file->f_path.dentry;
 	struct inode *inode = dentry->d_inode;
-	const char *name = dentry->d_name.name;
 	fmode_t mode = file->f_mode;
-	u32 mask = (mode & FMODE_WRITE) ? IN_CLOSE_WRITE : IN_CLOSE_NOWRITE;
+	__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	inotify_dentry_parent_queue_event(dentry, mask, 0, name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0);
 }
 
 /*
@@ -204,13 +256,15 @@ static inline void fsnotify_close(struct file *file)
 static inline void fsnotify_xattr(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	u32 mask = IN_ATTRIB;
+	__u32 mask = FS_ATTRIB;
 
 	if (S_ISDIR(inode->i_mode))
-		mask |= IN_ISDIR;
+		mask |= FS_IN_ISDIR;
 
-	inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name);
 	inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+	fsnotify_parent(dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 }
 
 /*
@@ -220,50 +274,37 @@ static inline void fsnotify_xattr(struct dentry *dentry)
 static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
 {
 	struct inode *inode = dentry->d_inode;
-	int dn_mask = 0;
-	u32 in_mask = 0;
+	__u32 mask = 0;
+
+	if (ia_valid & ATTR_UID)
+		mask |= FS_ATTRIB;
+	if (ia_valid & ATTR_GID)
+		mask |= FS_ATTRIB;
+	if (ia_valid & ATTR_SIZE)
+		mask |= FS_MODIFY;
 
-	if (ia_valid & ATTR_UID) {
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	}
-	if (ia_valid & ATTR_GID) {
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	}
-	if (ia_valid & ATTR_SIZE) {
-		in_mask |= IN_MODIFY;
-		dn_mask |= DN_MODIFY;
-	}
 	/* both times implies a utime(s) call */
 	if ((ia_valid & (ATTR_ATIME | ATTR_MTIME)) == (ATTR_ATIME | ATTR_MTIME))
-	{
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	} else if (ia_valid & ATTR_ATIME) {
-		in_mask |= IN_ACCESS;
-		dn_mask |= DN_ACCESS;
-	} else if (ia_valid & ATTR_MTIME) {
-		in_mask |= IN_MODIFY;
-		dn_mask |= DN_MODIFY;
-	}
-	if (ia_valid & ATTR_MODE) {
-		in_mask |= IN_ATTRIB;
-		dn_mask |= DN_ATTRIB;
-	}
+		mask |= FS_ATTRIB;
+	else if (ia_valid & ATTR_ATIME)
+		mask |= FS_ACCESS;
+	else if (ia_valid & ATTR_MTIME)
+		mask |= FS_MODIFY;
+
+	if (ia_valid & ATTR_MODE)
+		mask |= FS_ATTRIB;
 
-	if (dn_mask)
-		dnotify_parent(dentry, dn_mask);
-	if (in_mask) {
+	if (mask) {
 		if (S_ISDIR(inode->i_mode))
-			in_mask |= IN_ISDIR;
-		inotify_inode_queue_event(inode, in_mask, 0, NULL, NULL);
-		inotify_dentry_parent_queue_event(dentry, in_mask, 0,
-						  dentry->d_name.name);
+			mask |= FS_IN_ISDIR;
+		inotify_inode_queue_event(inode, mask, 0, NULL, NULL);
+
+		fsnotify_parent(dentry, mask);
+		fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
 	}
 }
 
-#ifdef CONFIG_INOTIFY	/* inotify helpers */
+#if defined(CONFIG_INOTIFY) || defined(CONFIG_FSNOTIFY)	/* notify helpers */
 
 /*
  * fsnotify_oldname_init - save off the old filename before we change it
@@ -281,7 +322,7 @@ static inline void fsnotify_oldname_free(const char *old_name)
 	kfree(old_name);
 }
 
-#else	/* CONFIG_INOTIFY */
+#else	/* CONFIG_INOTIFY || CONFIG_FSNOTIFY */
 
 static inline const char *fsnotify_oldname_init(const char *name)
 {
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
new file mode 100644
index 00000000000..44848aa830d
--- /dev/null
+++ b/include/linux/fsnotify_backend.h
@@ -0,0 +1,387 @@
+/*
+ * Filesystem access notification for Linux
+ *
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ */
+
+#ifndef __LINUX_FSNOTIFY_BACKEND_H
+#define __LINUX_FSNOTIFY_BACKEND_H
+
+#ifdef __KERNEL__
+
+#include <linux/idr.h> /* inotify uses this */
+#include <linux/fs.h> /* struct inode */
+#include <linux/list.h>
+#include <linux/path.h> /* struct path */
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/atomic.h>
+
+/*
+ * IN_* from inotfy.h lines up EXACTLY with FS_*, this is so we can easily
+ * convert between them.  dnotify only needs conversion at watch creation
+ * so no perf loss there.  fanotify isn't defined yet, so it can use the
+ * wholes if it needs more events.
+ */
+#define FS_ACCESS		0x00000001	/* File was accessed */
+#define FS_MODIFY		0x00000002	/* File was modified */
+#define FS_ATTRIB		0x00000004	/* Metadata changed */
+#define FS_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define FS_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FS_OPEN			0x00000020	/* File was opened */
+#define FS_MOVED_FROM		0x00000040	/* File was moved from X */
+#define FS_MOVED_TO		0x00000080	/* File was moved to Y */
+#define FS_CREATE		0x00000100	/* Subfile was created */
+#define FS_DELETE		0x00000200	/* Subfile was deleted */
+#define FS_DELETE_SELF		0x00000400	/* Self was deleted */
+#define FS_MOVE_SELF		0x00000800	/* Self was moved */
+
+#define FS_UNMOUNT		0x00002000	/* inode on umount fs */
+#define FS_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define FS_IN_IGNORED		0x00008000	/* last inotify event here */
+
+#define FS_IN_ISDIR		0x40000000	/* event occurred against dir */
+#define FS_IN_ONESHOT		0x80000000	/* only send event once */
+
+#define FS_DN_RENAME		0x10000000	/* file renamed */
+#define FS_DN_MULTISHOT		0x20000000	/* dnotify multishot */
+
+/* This inode cares about things that happen to its children.  Always set for
+ * dnotify and inotify. */
+#define FS_EVENT_ON_CHILD	0x08000000
+
+/* This is a list of all events that may get sent to a parernt based on fs event
+ * happening to inodes inside that directory */
+#define FS_EVENTS_POSS_ON_CHILD   (FS_ACCESS | FS_MODIFY | FS_ATTRIB |\
+				   FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN |\
+				   FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\
+				   FS_DELETE)
+
+/* listeners that hard code group numbers near the top */
+#define DNOTIFY_GROUP_NUM	UINT_MAX
+#define INOTIFY_GROUP_NUM	(DNOTIFY_GROUP_NUM-1)
+
+struct fsnotify_group;
+struct fsnotify_event;
+struct fsnotify_mark_entry;
+struct fsnotify_event_private_data;
+
+/*
+ * Each group much define these ops.  The fsnotify infrastructure will call
+ * these operations for each relevant group.
+ *
+ * should_send_event - given a group, inode, and mask this function determines
+ *		if the group is interested in this event.
+ * handle_event - main call for a group to handle an fs event
+ * free_group_priv - called when a group refcnt hits 0 to clean up the private union
+ * freeing-mark - this means that a mark has been flagged to die when everything
+ *		finishes using it.  The function is supplied with what must be a
+ *		valid group and inode to use to clean up.
+ */
+struct fsnotify_ops {
+	bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode, __u32 mask);
+	int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event);
+	void (*free_group_priv)(struct fsnotify_group *group);
+	void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group);
+	void (*free_event_priv)(struct fsnotify_event_private_data *priv);
+};
+
+/*
+ * A group is a "thing" that wants to receive notification about filesystem
+ * events.  The mask holds the subset of event types this group cares about.
+ * refcnt on a group is up to the implementor and at any moment if it goes 0
+ * everything will be cleaned up.
+ */
+struct fsnotify_group {
+	/*
+	 * global list of all groups receiving events from fsnotify.
+	 * anchored by fsnotify_groups and protected by either fsnotify_grp_mutex
+	 * or fsnotify_grp_srcu depending on write vs read.
+	 */
+	struct list_head group_list;
+
+	/*
+	 * Defines all of the event types in which this group is interested.
+	 * This mask is a bitwise OR of the FS_* events from above.  Each time
+	 * this mask changes for a group (if it changes) the correct functions
+	 * must be called to update the global structures which indicate global
+	 * interest in event types.
+	 */
+	__u32 mask;
+
+	/*
+	 * How the refcnt is used is up to each group.  When the refcnt hits 0
+	 * fsnotify will clean up all of the resources associated with this group.
+	 * As an example, the dnotify group will always have a refcnt=1 and that
+	 * will never change.  Inotify, on the other hand, has a group per
+	 * inotify_init() and the refcnt will hit 0 only when that fd has been
+	 * closed.
+	 */
+	atomic_t refcnt;		/* things with interest in this group */
+	unsigned int group_num;		/* simply prevents accidental group collision */
+
+	const struct fsnotify_ops *ops;	/* how this group handles things */
+
+	/* needed to send notification to userspace */
+	struct mutex notification_mutex;	/* protect the notification_list */
+	struct list_head notification_list;	/* list of event_holder this group needs to send to userspace */
+	wait_queue_head_t notification_waitq;	/* read() on the notification file blocks on this waitq */
+	unsigned int q_len;			/* events on the queue */
+	unsigned int max_events;		/* maximum events allowed on the list */
+
+	/* stores all fastapth entries assoc with this group so they can be cleaned on unregister */
+	spinlock_t mark_lock;		/* protect mark_entries list */
+	atomic_t num_marks;		/* 1 for each mark entry and 1 for not being
+					 * past the point of no return when freeing
+					 * a group */
+	struct list_head mark_entries;	/* all inode mark entries for this group */
+
+	/* prevents double list_del of group_list.  protected by global fsnotify_grp_mutex */
+	bool on_group_list;
+
+	/* groups can define private fields here or use the void *private */
+	union {
+		void *private;
+#ifdef CONFIG_INOTIFY_USER
+		struct inotify_group_private_data {
+			spinlock_t	idr_lock;
+			struct idr      idr;
+			u32             last_wd;
+			struct fasync_struct    *fa;    /* async notification */
+			struct user_struct      *user;
+		} inotify_data;
+#endif
+	};
+};
+
+/*
+ * A single event can be queued in multiple group->notification_lists.
+ *
+ * each group->notification_list will point to an event_holder which in turns points
+ * to the actual event that needs to be sent to userspace.
+ *
+ * Seemed cheaper to create a refcnt'd event and a small holder for every group
+ * than create a different event for every group
+ *
+ */
+struct fsnotify_event_holder {
+	struct fsnotify_event *event;
+	struct list_head event_list;
+};
+
+/*
+ * Inotify needs to tack data onto an event.  This struct lets us later find the
+ * correct private data of the correct group.
+ */
+struct fsnotify_event_private_data {
+	struct fsnotify_group *group;
+	struct list_head event_list;
+};
+
+/*
+ * all of the information about the original object we want to now send to
+ * a group.  If you want to carry more info from the accessing task to the
+ * listener this structure is where you need to be adding fields.
+ */
+struct fsnotify_event {
+	/*
+	 * If we create an event we are also likely going to need a holder
+	 * to link to a group.  So embed one holder in the event.  Means only
+	 * one allocation for the common case where we only have one group
+	 */
+	struct fsnotify_event_holder holder;
+	spinlock_t lock;	/* protection for the associated event_holder and private_list */
+	/* to_tell may ONLY be dereferenced during handle_event(). */
+	struct inode *to_tell;	/* either the inode the event happened to or its parent */
+	/*
+	 * depending on the event type we should have either a path or inode
+	 * We hold a reference on path, but NOT on inode.  Since we have the ref on
+	 * the path, it may be dereferenced at any point during this object's
+	 * lifetime.  That reference is dropped when this object's refcnt hits
+	 * 0.  If this event contains an inode instead of a path, the inode may
+	 * ONLY be used during handle_event().
+	 */
+	union {
+		struct path path;
+		struct inode *inode;
+	};
+/* when calling fsnotify tell it if the data is a path or inode */
+#define FSNOTIFY_EVENT_NONE	0
+#define FSNOTIFY_EVENT_PATH	1
+#define FSNOTIFY_EVENT_INODE	2
+#define FSNOTIFY_EVENT_FILE	3
+	int data_type;		/* which of the above union we have */
+	atomic_t refcnt;	/* how many groups still are using/need to send this event */
+	__u32 mask;		/* the type of access, bitwise OR for FS_* event types */
+
+	u32 sync_cookie;	/* used to corrolate events, namely inotify mv events */
+	char *file_name;
+	size_t name_len;
+
+	struct list_head private_data_list;	/* groups can store private data here */
+};
+
+/*
+ * a mark is simply an entry attached to an in core inode which allows an
+ * fsnotify listener to indicate they are either no longer interested in events
+ * of a type matching mask or only interested in those events.
+ *
+ * these are flushed when an inode is evicted from core and may be flushed
+ * when the inode is modified (as seen by fsnotify_access).  Some fsnotify users
+ * (such as dnotify) will flush these when the open fd is closed and not at
+ * inode eviction or modification.
+ */
+struct fsnotify_mark_entry {
+	__u32 mask;			/* mask this mark entry is for */
+	/* we hold ref for each i_list and g_list.  also one ref for each 'thing'
+	 * in kernel that found and may be using this mark. */
+	atomic_t refcnt;		/* active things looking at this mark */
+	struct inode *inode;		/* inode this entry is associated with */
+	struct fsnotify_group *group;	/* group this mark entry is for */
+	struct hlist_node i_list;	/* list of mark_entries by inode->i_fsnotify_mark_entries */
+	struct list_head g_list;	/* list of mark_entries by group->i_fsnotify_mark_entries */
+	spinlock_t lock;		/* protect group, inode, and killme */
+	struct list_head free_i_list;	/* tmp list used when freeing this mark */
+	struct list_head free_g_list;	/* tmp list used when freeing this mark */
+	void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */
+};
+
+#ifdef CONFIG_FSNOTIFY
+
+/* called from the vfs helpers */
+
+/* main fsnotify call to send events */
+extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+		     const char *name, u32 cookie);
+extern void __fsnotify_parent(struct dentry *dentry, __u32 mask);
+extern void __fsnotify_inode_delete(struct inode *inode);
+extern u32 fsnotify_get_cookie(void);
+
+static inline int fsnotify_inode_watches_children(struct inode *inode)
+{
+	/* FS_EVENT_ON_CHILD is set if the inode may care */
+	if (!(inode->i_fsnotify_mask & FS_EVENT_ON_CHILD))
+		return 0;
+	/* this inode might care about child events, does it care about the
+	 * specific set of events that can happen on a child? */
+	return inode->i_fsnotify_mask & FS_EVENTS_POSS_ON_CHILD;
+}
+
+/*
+ * Update the dentry with a flag indicating the interest of its parent to receive
+ * filesystem events when those events happens to this dentry->d_inode.
+ */
+static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
+{
+	struct dentry *parent;
+
+	assert_spin_locked(&dcache_lock);
+	assert_spin_locked(&dentry->d_lock);
+
+	parent = dentry->d_parent;
+	if (fsnotify_inode_watches_children(parent->d_inode))
+		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
+	else
+		dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
+}
+
+/*
+ * fsnotify_d_instantiate - instantiate a dentry for inode
+ * Called with dcache_lock held.
+ */
+static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
+{
+	if (!inode)
+		return;
+
+	assert_spin_locked(&dcache_lock);
+
+	spin_lock(&dentry->d_lock);
+	__fsnotify_update_dcache_flags(dentry);
+	spin_unlock(&dentry->d_lock);
+}
+
+/* called from fsnotify listeners, such as fanotify or dnotify */
+
+/* must call when a group changes its ->mask */
+extern void fsnotify_recalc_global_mask(void);
+/* get a reference to an existing or create a new group */
+extern struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num,
+						    __u32 mask,
+						    const struct fsnotify_ops *ops);
+/* run all marks associated with this group and update group->mask */
+extern void fsnotify_recalc_group_mask(struct fsnotify_group *group);
+/* drop reference on a group from fsnotify_obtain_group */
+extern void fsnotify_put_group(struct fsnotify_group *group);
+
+/* take a reference to an event */
+extern void fsnotify_get_event(struct fsnotify_event *event);
+extern void fsnotify_put_event(struct fsnotify_event *event);
+/* find private data previously attached to an event and unlink it */
+extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group,
+									   struct fsnotify_event *event);
+
+/* attach the event to the group notification queue */
+extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event,
+				     struct fsnotify_event_private_data *priv);
+/* true if the group notification queue is empty */
+extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
+/* return, but do not dequeue the first event on the notification queue */
+extern struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group);
+/* return AND dequeue the first event on the notification queue */
+extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group);
+
+/* functions used to manipulate the marks attached to inodes */
+
+/* run all marks associated with an inode and update inode->i_fsnotify_mask */
+extern void fsnotify_recalc_inode_mask(struct inode *inode);
+extern void fsnotify_init_mark(struct fsnotify_mark_entry *entry, void (*free_mark)(struct fsnotify_mark_entry *entry));
+/* find (and take a reference) to a mark associated with group and inode */
+extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode);
+/* attach the mark to both the group and the inode */
+extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode);
+/* given a mark, flag it to be freed when all references are dropped */
+extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry);
+/* run all the marks in a group, and flag them to be freed */
+extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
+extern void fsnotify_get_mark(struct fsnotify_mark_entry *entry);
+extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry);
+extern void fsnotify_unmount_inodes(struct list_head *list);
+
+/* put here because inotify does some weird stuff when destroying watches */
+extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
+						    void *data, int data_is, const char *name,
+						    u32 cookie);
+
+#else
+
+static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+			    const char *name, u32 cookie)
+{}
+
+static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask)
+{}
+
+static inline void __fsnotify_inode_delete(struct inode *inode)
+{}
+
+static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
+{}
+
+static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
+{}
+
+static inline u32 fsnotify_get_cookie(void)
+{
+	return 0;
+}
+
+static inline void fsnotify_unmount_inodes(struct list_head *list)
+{}
+
+#endif	/* CONFIG_FSNOTIFY */
+
+#endif	/* __KERNEL __ */
+
+#endif	/* __LINUX_FSNOTIFY_BACKEND_H */
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 8a0c2f221e6..39b95c56587 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -233,8 +233,6 @@ extern int ftrace_arch_read_dyn_info(char *buf, int size);
 
 extern int skip_trace(unsigned long ip);
 
-extern void ftrace_release(void *start, unsigned long size);
-
 extern void ftrace_disable_daemon(void);
 extern void ftrace_enable_daemon(void);
 #else
@@ -325,13 +323,8 @@ static inline void __ftrace_enabled_restore(int enabled)
 
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
 extern void ftrace_init(void);
-extern void ftrace_init_module(struct module *mod,
-			       unsigned long *start, unsigned long *end);
 #else
 static inline void ftrace_init(void) { }
-static inline void
-ftrace_init_module(struct module *mod,
-		   unsigned long *start, unsigned long *end) { }
 #endif
 
 /*
@@ -368,6 +361,7 @@ struct ftrace_ret_stack {
 	unsigned long ret;
 	unsigned long func;
 	unsigned long long calltime;
+	unsigned long long subtime;
 };
 
 /*
@@ -379,8 +373,6 @@ extern void return_to_handler(void);
 
 extern int
 ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth);
-extern void
-ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret);
 
 /*
  * Sometimes we don't want to trace a function with the function
@@ -496,8 +488,15 @@ static inline int test_tsk_trace_graph(struct task_struct *tsk)
 
 extern int ftrace_dump_on_oops;
 
+#ifdef CONFIG_PREEMPT
+#define INIT_TRACE_RECURSION		.trace_recursion = 0,
+#endif
+
 #endif /* CONFIG_TRACING */
 
+#ifndef INIT_TRACE_RECURSION
+#define INIT_TRACE_RECURSION
+#endif
 
 #ifdef CONFIG_HW_BRANCH_TRACER
 
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
new file mode 100644
index 00000000000..5c093ffc655
--- /dev/null
+++ b/include/linux/ftrace_event.h
@@ -0,0 +1,172 @@
+#ifndef _LINUX_FTRACE_EVENT_H
+#define _LINUX_FTRACE_EVENT_H
+
+#include <linux/trace_seq.h>
+#include <linux/ring_buffer.h>
+#include <linux/percpu.h>
+
+struct trace_array;
+struct tracer;
+struct dentry;
+
+DECLARE_PER_CPU(struct trace_seq, ftrace_event_seq);
+
+struct trace_print_flags {
+	unsigned long		mask;
+	const char		*name;
+};
+
+const char *ftrace_print_flags_seq(struct trace_seq *p, const char *delim,
+				   unsigned long flags,
+				   const struct trace_print_flags *flag_array);
+
+const char *ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val,
+				     const struct trace_print_flags *symbol_array);
+
+/*
+ * The trace entry - the most basic unit of tracing. This is what
+ * is printed in the end as a single line in the trace output, such as:
+ *
+ *     bash-15816 [01]   235.197585: idle_cpu <- irq_enter
+ */
+struct trace_entry {
+	unsigned short		type;
+	unsigned char		flags;
+	unsigned char		preempt_count;
+	int			pid;
+	int			tgid;
+};
+
+#define FTRACE_MAX_EVENT						\
+	((1 << (sizeof(((struct trace_entry *)0)->type) * 8)) - 1)
+
+/*
+ * Trace iterator - used by printout routines who present trace
+ * results to users and which routines might sleep, etc:
+ */
+struct trace_iterator {
+	struct trace_array	*tr;
+	struct tracer		*trace;
+	void			*private;
+	int			cpu_file;
+	struct mutex		mutex;
+	struct ring_buffer_iter	*buffer_iter[NR_CPUS];
+	unsigned long		iter_flags;
+
+	/* The below is zeroed out in pipe_read */
+	struct trace_seq	seq;
+	struct trace_entry	*ent;
+	int			cpu;
+	u64			ts;
+
+	loff_t			pos;
+	long			idx;
+
+	cpumask_var_t		started;
+};
+
+
+typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
+					      int flags);
+struct trace_event {
+	struct hlist_node	node;
+	struct list_head	list;
+	int			type;
+	trace_print_func	trace;
+	trace_print_func	raw;
+	trace_print_func	hex;
+	trace_print_func	binary;
+};
+
+extern int register_ftrace_event(struct trace_event *event);
+extern int unregister_ftrace_event(struct trace_event *event);
+
+/* Return values for print_line callback */
+enum print_line_t {
+	TRACE_TYPE_PARTIAL_LINE	= 0,	/* Retry after flushing the seq */
+	TRACE_TYPE_HANDLED	= 1,
+	TRACE_TYPE_UNHANDLED	= 2,	/* Relay to other output functions */
+	TRACE_TYPE_NO_CONSUME	= 3	/* Handled but ask to not consume */
+};
+
+
+struct ring_buffer_event *
+trace_current_buffer_lock_reserve(int type, unsigned long len,
+				  unsigned long flags, int pc);
+void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
+					unsigned long flags, int pc);
+void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
+					unsigned long flags, int pc);
+void trace_current_buffer_discard_commit(struct ring_buffer_event *event);
+
+void tracing_record_cmdline(struct task_struct *tsk);
+
+struct ftrace_event_call {
+	struct list_head	list;
+	char			*name;
+	char			*system;
+	struct dentry		*dir;
+	struct trace_event	*event;
+	int			enabled;
+	int			(*regfunc)(void);
+	void			(*unregfunc)(void);
+	int			id;
+	int			(*raw_init)(void);
+	int			(*show_format)(struct trace_seq *s);
+	int			(*define_fields)(void);
+	struct list_head	fields;
+	int			filter_active;
+	void			*filter;
+	void			*mod;
+
+#ifdef CONFIG_EVENT_PROFILE
+	atomic_t	profile_count;
+	int		(*profile_enable)(struct ftrace_event_call *);
+	void		(*profile_disable)(struct ftrace_event_call *);
+#endif
+};
+
+#define MAX_FILTER_PRED		32
+#define MAX_FILTER_STR_VAL	128
+
+extern int init_preds(struct ftrace_event_call *call);
+extern void destroy_preds(struct ftrace_event_call *call);
+extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
+extern int filter_current_check_discard(struct ftrace_event_call *call,
+					void *rec,
+					struct ring_buffer_event *event);
+
+extern int trace_define_field(struct ftrace_event_call *call, char *type,
+			      char *name, int offset, int size, int is_signed);
+
+#define is_signed_type(type)	(((type)(-1)) < 0)
+
+int trace_set_clr_event(const char *system, const char *event, int set);
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement optimizing out.
+ */
+#define event_trace_printk(ip, fmt, args...)				\
+do {									\
+	__trace_printk_check_format(fmt, ##args);			\
+	tracing_record_cmdline(current);				\
+	if (__builtin_constant_p(fmt)) {				\
+		static const char *trace_printk_fmt			\
+		  __attribute__((section("__trace_printk_fmt"))) =	\
+			__builtin_constant_p(fmt) ? fmt : NULL;		\
+									\
+		__trace_bprintk(ip, trace_printk_fmt, ##args);		\
+	} else								\
+		__trace_printk(ip, fmt, ##args);			\
+} while (0)
+
+#define __common_field(type, item, is_signed)				\
+	ret = trace_define_field(event_call, #type, "common_" #item,	\
+				 offsetof(typeof(field.ent), item),	\
+				 sizeof(field.ent.item), is_signed);	\
+	if (ret)							\
+		return ret;
+
+#endif /* _LINUX_FTRACE_EVENT_H */
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 162e5defe68..d41ed593f79 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -121,6 +121,13 @@ struct fuse_file_lock {
 #define FUSE_BIG_WRITES		(1 << 5)
 
 /**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
  * Release flags
  */
 #define FUSE_RELEASE_FLUSH	(1 << 0)
@@ -210,6 +217,9 @@ enum fuse_opcode {
 	FUSE_DESTROY       = 38,
 	FUSE_IOCTL         = 39,
 	FUSE_POLL          = 40,
+
+	/* CUSE specific operations */
+	CUSE_INIT          = 4096,
 };
 
 enum fuse_notify_code {
@@ -401,6 +411,27 @@ struct fuse_init_out {
 	__u32	max_write;
 };
 
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+};
+
+struct cuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+	__u32	max_read;
+	__u32	max_write;
+	__u32	dev_major;		/* chardev major */
+	__u32	dev_minor;		/* chardev minor */
+	__u32	spare[10];
+};
+
 struct fuse_interrupt_in {
 	__u64	unique;
 };
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 3bf5bb5a34f..34956c8fdeb 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -23,6 +23,8 @@ union ktime;
 #define FUTEX_TRYLOCK_PI	8
 #define FUTEX_WAIT_BITSET	9
 #define FUTEX_WAKE_BITSET	10
+#define FUTEX_WAIT_REQUEUE_PI	11
+#define FUTEX_CMP_REQUEUE_PI	12
 
 #define FUTEX_PRIVATE_FLAG	128
 #define FUTEX_CLOCK_REALTIME	256
@@ -38,6 +40,10 @@ union ktime;
 #define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
 #define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITS | FUTEX_PRIVATE_FLAG)
 #define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITS | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
 
 /*
  * Support for robust futexes: the kernel cleans up held futexes at
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index a1a28caed23..7cbd38d363a 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -90,6 +90,7 @@ struct disk_stats {
 struct hd_struct {
 	sector_t start_sect;
 	sector_t nr_sects;
+	sector_t alignment_offset;
 	struct device __dev;
 	struct kobject *holder_dir;
 	int policy, partno;
@@ -113,6 +114,7 @@ struct hd_struct {
 #define GENHD_FL_UP				16
 #define GENHD_FL_SUPPRESS_PARTITION_INFO	32
 #define GENHD_FL_EXT_DEVT			64 /* allow extended devt */
+#define GENHD_FL_NATIVE_CAPACITY		128
 
 #define BLK_SCSI_MAX_CMDS	(256)
 #define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 0bbc15f5453..3760e7c5de0 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -85,6 +85,9 @@ struct vm_area_struct;
 			__GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\
 			__GFP_NORETRY|__GFP_NOMEMALLOC)
 
+/* Control slab gfp mask during early boot */
+#define SLAB_GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)
+
 /* Control allocation constraints */
 #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE)
 
diff --git a/include/linux/hid.h b/include/linux/hid.h
index a72876e4358..53489fd4d70 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -238,6 +238,42 @@ struct hid_item {
 #define HID_GD_RIGHT		0x00010092
 #define HID_GD_LEFT		0x00010093
 
+#define HID_DG_DIGITIZER	0x000d0001
+#define HID_DG_PEN		0x000d0002
+#define HID_DG_LIGHTPEN		0x000d0003
+#define HID_DG_TOUCHSCREEN	0x000d0004
+#define HID_DG_TOUCHPAD		0x000d0005
+#define HID_DG_STYLUS		0x000d0020
+#define HID_DG_PUCK		0x000d0021
+#define HID_DG_FINGER		0x000d0022
+#define HID_DG_TIPPRESSURE	0x000d0030
+#define HID_DG_BARRELPRESSURE	0x000d0031
+#define HID_DG_INRANGE		0x000d0032
+#define HID_DG_TOUCH		0x000d0033
+#define HID_DG_UNTOUCH		0x000d0034
+#define HID_DG_TAP		0x000d0035
+#define HID_DG_TABLETFUNCTIONKEY	0x000d0039
+#define HID_DG_PROGRAMCHANGEKEY	0x000d003a
+#define HID_DG_INVERT		0x000d003c
+#define HID_DG_TIPSWITCH	0x000d0042
+#define HID_DG_TIPSWITCH2	0x000d0043
+#define HID_DG_BARRELSWITCH	0x000d0044
+#define HID_DG_ERASER		0x000d0045
+#define HID_DG_TABLETPICK	0x000d0046
+/*
+ * as of May 20, 2009 the usages below are not yet in the official USB spec
+ * but are being pushed by Microsft as described in their paper "Digitizer
+ * Drivers for Windows Touch and Pen-Based Computers"
+ */
+#define HID_DG_CONFIDENCE	0x000d0047
+#define HID_DG_WIDTH		0x000d0048
+#define HID_DG_HEIGHT		0x000d0049
+#define HID_DG_CONTACTID	0x000d0051
+#define HID_DG_INPUTMODE	0x000d0052
+#define HID_DG_DEVICEINDEX	0x000d0053
+#define HID_DG_CONTACTCOUNT	0x000d0054
+#define HID_DG_CONTACTMAX	0x000d0055
+
 /*
  * HID report types --- Ouch! HID spec says 1 2 3!
  */
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
index 8ed591b0887..4d5e57ff661 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/i2c-ocores.h
@@ -14,6 +14,8 @@
 struct ocores_i2c_platform_data {
 	u32 regstep;   /* distance between registers */
 	u32 clock_khz; /* input clock in kHz */
+	u8 num_devices; /* number of devices in the devices list */
+	struct i2c_board_info const *devices; /* devices connected to the bus */
 };
 
 #endif /* _LINUX_I2C_OCORES_H */
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
index 05a80c44513..1587b7dec50 100644
--- a/include/linux/i7300_idle.h
+++ b/include/linux/i7300_idle.h
@@ -16,35 +16,33 @@
 struct fbd_ioat {
 	unsigned int vendor;
 	unsigned int ioat_dev;
+	unsigned int enabled;
 };
 
 /*
  * The i5000 chip-set has the same hooks as the i7300
- * but support is disabled by default because this driver
- * has not been validated on that platform.
+ * but it is not enabled by default and must be manually
+ * manually enabled with "forceload=1" because it is
+ * only lightly validated.
  */
-#define SUPPORT_I5000 0
 
 static const struct fbd_ioat fbd_ioat_list[] = {
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
-#if SUPPORT_I5000
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
-#endif
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
 	{0, 0}
 };
 
 /* table of devices that work with this driver */
 static const struct pci_device_id pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-#if SUPPORT_I5000
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-#endif
 	{ } /* Terminating entry */
 };
 
 /* Check for known platforms with I/O-AT */
 static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
-						struct pci_dev **ioat_dev)
+						struct pci_dev **ioat_dev,
+						int enable_all)
 {
 	int i;
 	struct pci_dev *memdev, *dmadev;
@@ -69,6 +67,8 @@ static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
 	for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
 		if (dmadev->vendor == fbd_ioat_list[i].vendor &&
 		    dmadev->device == fbd_ioat_list[i].ioat_dev) {
+			if (!(fbd_ioat_list[i].enabled || enable_all))
+				continue;
 			if (fbd_dev)
 				*fbd_dev = memdev;
 			if (ioat_dev)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index ff65fffb078..a6c6a2fad7c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -26,6 +26,9 @@
 #include <asm/io.h>
 #include <asm/mutex.h>
 
+/* for request_sense */
+#include <linux/cdrom.h>
+
 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
 # define SUPPORT_VLB_SYNC 0
 #else
@@ -175,7 +178,7 @@ typedef u8 hwif_chipset_t;
 /*
  * Structure to hold all information about the location of this port
  */
-typedef struct hw_regs_s {
+struct ide_hw {
 	union {
 		struct ide_io_ports	io_ports;
 		unsigned long		io_ports_array[IDE_NR_PORTS];
@@ -183,12 +186,11 @@ typedef struct hw_regs_s {
 
 	int		irq;			/* our irq number */
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
-	hwif_chipset_t  chipset;
 	struct device	*dev, *parent;
 	unsigned long	config;
-} hw_regs_t;
+};
 
-static inline void ide_std_init_ports(hw_regs_t *hw,
+static inline void ide_std_init_ports(struct ide_hw *hw,
 				      unsigned long io_addr,
 				      unsigned long ctl_addr)
 {
@@ -215,21 +217,12 @@ static inline void ide_std_init_ports(hw_regs_t *hw,
 
 /*
  * Special Driver Flags
- *
- * set_geometry	: respecify drive geometry
- * recalibrate	: seek to cyl 0
- * set_multmode	: set multmode count
- * reserved	: unused
  */
-typedef union {
-	unsigned all			: 8;
-	struct {
-		unsigned set_geometry	: 1;
-		unsigned recalibrate	: 1;
-		unsigned set_multmode	: 1;
-		unsigned reserved	: 5;
-	} b;
-} special_t;
+enum {
+	IDE_SFLAG_SET_GEOMETRY		= (1 << 0),
+	IDE_SFLAG_RECALIBRATE		= (1 << 1),
+	IDE_SFLAG_SET_MULTMODE		= (1 << 2),
+};
 
 /*
  * Status returned from various ide_ functions
@@ -324,7 +317,6 @@ struct ide_cmd {
 	unsigned int		cursg_ofs;
 
 	struct request		*rq;		/* copy of request */
-	void			*special;	/* valid_t generally */
 };
 
 /* ATAPI packet command flags */
@@ -360,11 +352,7 @@ struct ide_atapi_pc {
 
 	/* data buffer */
 	u8 *buf;
-	/* current buffer position */
-	u8 *cur_pos;
 	int buf_size;
-	/* missing/available data on the current buffer */
-	int b_count;
 
 	/* the corresponding request */
 	struct request *rq;
@@ -377,10 +365,6 @@ struct ide_atapi_pc {
 	 */
 	u8 pc_buf[IDE_PC_BUFFER_SIZE];
 
-	/* idetape only */
-	struct idetape_bh *bh;
-	char *b_data;
-
 	unsigned long timeout;
 };
 
@@ -397,6 +381,7 @@ struct ide_drive_s;
 struct ide_disk_ops {
 	int		(*check)(struct ide_drive_s *, const char *);
 	int		(*get_capacity)(struct ide_drive_s *);
+	u64		(*set_capacity)(struct ide_drive_s *, u64);
 	void		(*setup)(struct ide_drive_s *);
 	void		(*flush)(struct ide_drive_s *);
 	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
@@ -474,6 +459,8 @@ enum {
 	IDE_DFLAG_NICE1			= (1 << 5),
 	/* device is physically present */
 	IDE_DFLAG_PRESENT		= (1 << 6),
+	/* disable Host Protected Area */
+	IDE_DFLAG_NOHPA			= (1 << 7),
 	/* id read from device (synthetic if not set) */
 	IDE_DFLAG_ID_READ		= (1 << 8),
 	IDE_DFLAG_NOPROBE		= (1 << 9),
@@ -512,6 +499,7 @@ enum {
 	/* write protect */
 	IDE_DFLAG_WP			= (1 << 29),
 	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 30),
+	IDE_DFLAG_NIEN_QUIRK		= (1 << 31),
 };
 
 struct ide_drive_s {
@@ -536,14 +524,13 @@ struct ide_drive_s {
 	unsigned long sleep;		/* sleep until this time */
 	unsigned long timeout;		/* max time to wait for irq */
 
-	special_t	special;	/* special action flags */
+	u8	special_flags;		/* special action flags */
 
 	u8	select;			/* basic drive/head select reg value */
 	u8	retry_pio;		/* retrying dma capable host in pio */
 	u8	waiting_for_dma;	/* dma currently in progress */
 	u8	dma;			/* atapi dma flag */
 
-        u8	quirk_list;	/* considered quirky, set for a specific host */
         u8	init_speed;	/* transfer rate set at boot */
         u8	current_speed;	/* current transfer rate set */
 	u8	desired_speed;	/* desired transfer rate set */
@@ -568,8 +555,7 @@ struct ide_drive_s {
 	unsigned int	drive_data;	/* used by set_pio_mode/dev_select() */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
-	u64		probed_capacity;/* initial reported media capacity (ide-cd only currently) */
-
+	u64		probed_capacity;/* initial/native media capacity */
 	u64		capacity64;	/* total number of sectors */
 
 	int		lun;		/* logical unit */
@@ -593,16 +579,16 @@ struct ide_drive_s {
 	/* callback for packet commands */
 	int  (*pc_callback)(struct ide_drive_s *, int);
 
-	void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *);
-	int  (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *,
-			      unsigned int, int);
-
 	ide_startstop_t (*irq_handler)(struct ide_drive_s *);
 
 	unsigned long atapi_flags;
 
 	struct ide_atapi_pc request_sense_pc;
-	struct request request_sense_rq;
+
+	/* current sense rq and buffer */
+	bool sense_rq_armed;
+	struct request sense_rq;
+	struct request_sense sense_data;
 };
 
 typedef struct ide_drive_s ide_drive_t;
@@ -1109,7 +1095,7 @@ void ide_fix_driveid(u16 *);
 
 extern void ide_fixstring(u8 *, const int, const int);
 
-int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
+int ide_busy_sleep(ide_drive_t *, unsigned long, int);
 
 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
 
@@ -1174,7 +1160,10 @@ int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
-void ide_retry_pc(ide_drive_t *, struct gendisk *);
+void ide_retry_pc(ide_drive_t *drive);
+
+void ide_prep_sense(ide_drive_t *drive, struct request *rq);
+int ide_queue_sense_rq(ide_drive_t *drive, void *special);
 
 int ide_cd_expiry(ide_drive_t *);
 
@@ -1225,7 +1214,7 @@ static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
 }
 
 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
-			 hw_regs_t *, hw_regs_t **);
+			 struct ide_hw *, struct ide_hw **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1464,16 +1453,18 @@ static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
 void ide_register_region(struct gendisk *);
 void ide_unregister_region(struct gendisk *);
 
+void ide_check_nien_quirk_list(ide_drive_t *);
 void ide_undecoded_slave(ide_drive_t *);
 
 void ide_port_apply_params(ide_hwif_t *);
 int ide_sysfs_register_port(ide_hwif_t *);
 
-struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
+				unsigned int);
 void ide_host_free(struct ide_host *);
 int ide_host_register(struct ide_host *, const struct ide_port_info *,
-		      hw_regs_t **);
-int ide_host_add(const struct ide_port_info *, hw_regs_t **,
+		      struct ide_hw **);
+int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
 		 struct ide_host **);
 void ide_host_remove(struct ide_host *);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index cfe4fe1b713..60e8934d10b 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -79,6 +79,7 @@
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
 
 /*
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 0e2aa45cb0c..b1b827d091a 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -13,14 +13,17 @@
 #include <linux/fs.h>
 struct linux_binprm;
 
+#define IMA_COUNT_UPDATE 1
+#define IMA_COUNT_LEAVE 0
+
 #ifdef CONFIG_IMA
 extern int ima_bprm_check(struct linux_binprm *bprm);
 extern int ima_inode_alloc(struct inode *inode);
 extern void ima_inode_free(struct inode *inode);
-extern int ima_path_check(struct path *path, int mask);
+extern int ima_path_check(struct path *path, int mask, int update_counts);
 extern void ima_file_free(struct file *file);
 extern int ima_file_mmap(struct file *file, unsigned long prot);
-extern void ima_shm_check(struct file *file);
+extern void ima_counts_get(struct file *file);
 
 #else
 static inline int ima_bprm_check(struct linux_binprm *bprm)
@@ -38,7 +41,7 @@ static inline void ima_inode_free(struct inode *inode)
 	return;
 }
 
-static inline int ima_path_check(struct path *path, int mask)
+static inline int ima_path_check(struct path *path, int mask, int update_counts)
 {
 	return 0;
 }
@@ -53,7 +56,7 @@ static inline int ima_file_mmap(struct file *file, unsigned long prot)
 	return 0;
 }
 
-static inline void ima_shm_check(struct file *file)
+static inline void ima_counts_get(struct file *file)
 {
 	return;
 }
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index d87247d2641..28b1f30601b 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -108,6 +108,15 @@ extern struct group_info init_groups;
 
 extern struct cred init_cred;
 
+#ifdef CONFIG_PERF_COUNTERS
+# define INIT_PERF_COUNTERS(tsk)					\
+	.perf_counter_mutex = 						\
+		 __MUTEX_INITIALIZER(tsk.perf_counter_mutex),		\
+	.perf_counter_list = LIST_HEAD_INIT(tsk.perf_counter_list),
+#else
+# define INIT_PERF_COUNTERS(tsk)
+#endif
+
 /*
  *  INIT_TASK is used to set up the first task table, touch at
  * your own risk!. Base=0, limit=0x1fffff (=2MB)
@@ -145,8 +154,8 @@ extern struct cred init_cred;
 	.group_leader	= &tsk,						\
 	.real_cred	= &init_cred,					\
 	.cred		= &init_cred,					\
-	.cred_exec_mutex =						\
-		 __MUTEX_INITIALIZER(tsk.cred_exec_mutex),		\
+	.cred_guard_mutex =						\
+		 __MUTEX_INITIALIZER(tsk.cred_guard_mutex),		\
 	.comm		= "swapper",					\
 	.thread		= INIT_THREAD,					\
 	.fs		= &init_fs,					\
@@ -171,9 +180,11 @@ extern struct cred init_cred;
 	},								\
 	.dirties = INIT_PROP_LOCAL_SINGLE(dirties),			\
 	INIT_IDS							\
+	INIT_PERF_COUNTERS(tsk)						\
 	INIT_TRACE_IRQFLAGS						\
 	INIT_LOCKDEP							\
 	INIT_FTRACE_GRAPH						\
+	INIT_TRACE_RECURSION						\
 }
 
 
diff --git a/include/linux/input.h b/include/linux/input.h
index 0e6ff5de358..6fed4f6a9c9 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -656,6 +656,7 @@ struct input_absinfo {
 #define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
 #define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 
 #define ABS_MAX			0x3f
 #define ABS_CNT			(ABS_MAX+1)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 91bb76f44f1..c41e812e9d5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -183,6 +183,7 @@ extern void disable_irq(unsigned int irq);
 extern void enable_irq(unsigned int irq);
 
 /* The following three functions are for the core kernel use only. */
+#ifdef CONFIG_GENERIC_HARDIRQS
 extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
 #ifdef CONFIG_PM_SLEEP
@@ -190,6 +191,11 @@ extern int check_wakeup_irqs(void);
 #else
 static inline int check_wakeup_irqs(void) { return 0; }
 #endif
+#else
+static inline void suspend_device_irqs(void) { };
+static inline void resume_device_irqs(void) { };
+static inline int check_wakeup_irqs(void) { return 0; }
+#endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 
@@ -566,6 +572,6 @@ struct irq_desc;
 extern int early_irq_init(void);
 extern int arch_probe_nr_irqs(void);
 extern int arch_early_irq_init(void);
-extern int arch_init_chip_data(struct irq_desc *desc, int cpu);
+extern int arch_init_chip_data(struct irq_desc *desc, int node);
 
 #endif
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 08b987bccf8..dd05434fa45 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -64,7 +64,7 @@ struct cfq_io_context {
  * and kmalloc'ed. These could be shared between processes.
  */
 struct io_context {
-	atomic_t refcount;
+	atomic_long_t refcount;
 	atomic_t nr_tasks;
 
 	/* all the fields below are protected by this lock */
@@ -91,8 +91,8 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc)
 	 * if ref count is zero, don't allow sharing (ioc is going away, it's
 	 * a race).
 	 */
-	if (ioc && atomic_inc_not_zero(&ioc->refcount)) {
-		atomic_inc(&ioc->nr_tasks);
+	if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
+		atomic_long_inc(&ioc->refcount);
 		return ioc;
 	}
 
diff --git a/include/linux/irq.h b/include/linux/irq.h
index b7cbeed972e..1e50c34f006 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -117,7 +117,7 @@ struct irq_chip {
 	void		(*eoi)(unsigned int irq);
 
 	void		(*end)(unsigned int irq);
-	void		(*set_affinity)(unsigned int irq,
+	int		(*set_affinity)(unsigned int irq,
 					const struct cpumask *dest);
 	int		(*retrigger)(unsigned int irq);
 	int		(*set_type)(unsigned int irq, unsigned int flow_type);
@@ -187,7 +187,7 @@ struct irq_desc {
 	spinlock_t		lock;
 #ifdef CONFIG_SMP
 	cpumask_var_t		affinity;
-	unsigned int		cpu;
+	unsigned int		node;
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	cpumask_var_t		pending_mask;
 #endif
@@ -201,26 +201,23 @@ struct irq_desc {
 } ____cacheline_internodealigned_in_smp;
 
 extern void arch_init_copy_chip_data(struct irq_desc *old_desc,
-					struct irq_desc *desc, int cpu);
+					struct irq_desc *desc, int node);
 extern void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc);
 
 #ifndef CONFIG_SPARSE_IRQ
 extern struct irq_desc irq_desc[NR_IRQS];
-#else /* CONFIG_SPARSE_IRQ */
-extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int cpu);
-#endif /* CONFIG_SPARSE_IRQ */
-
-extern struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu);
+#endif
 
-static inline struct irq_desc *
-irq_remap_to_desc(unsigned int irq, struct irq_desc *desc)
-{
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-	return irq_to_desc(irq);
+#ifdef CONFIG_NUMA_IRQ_DESC
+extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int node);
 #else
+static inline struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
+{
 	return desc;
-#endif
 }
+#endif
+
+extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node);
 
 /*
  * Migration helpers for obsolete names, they will go away:
@@ -386,7 +383,7 @@ extern void set_irq_noprobe(unsigned int irq);
 extern void set_irq_probe(unsigned int irq);
 
 /* Handle dynamic irq creation and destruction */
-extern unsigned int create_irq_nr(unsigned int irq_want);
+extern unsigned int create_irq_nr(unsigned int irq_want, int node);
 extern int create_irq(void);
 extern void destroy_irq(unsigned int irq);
 
@@ -424,47 +421,44 @@ extern int set_irq_msi(unsigned int irq, struct msi_desc *entry);
 
 #ifdef CONFIG_SMP
 /**
- * init_alloc_desc_masks - allocate cpumasks for irq_desc
+ * alloc_desc_masks - allocate cpumasks for irq_desc
  * @desc:	pointer to irq_desc struct
  * @cpu:	cpu which will be handling the cpumasks
  * @boot:	true if need bootmem
  *
  * Allocates affinity and pending_mask cpumask if required.
  * Returns true if successful (or not required).
- * Side effect: affinity has all bits set, pending_mask has all bits clear.
  */
-static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
-								bool boot)
+static inline bool alloc_desc_masks(struct irq_desc *desc, int node,
+							bool boot)
 {
-	int node;
-
-	if (boot) {
-		alloc_bootmem_cpumask_var(&desc->affinity);
-		cpumask_setall(desc->affinity);
-
-#ifdef CONFIG_GENERIC_PENDING_IRQ
-		alloc_bootmem_cpumask_var(&desc->pending_mask);
-		cpumask_clear(desc->pending_mask);
-#endif
-		return true;
-	}
+	gfp_t gfp = GFP_ATOMIC;
 
-	node = cpu_to_node(cpu);
+	if (boot)
+		gfp = GFP_NOWAIT;
 
-	if (!alloc_cpumask_var_node(&desc->affinity, GFP_ATOMIC, node))
+#ifdef CONFIG_CPUMASK_OFFSTACK
+	if (!alloc_cpumask_var_node(&desc->affinity, gfp, node))
 		return false;
-	cpumask_setall(desc->affinity);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-	if (!alloc_cpumask_var_node(&desc->pending_mask, GFP_ATOMIC, node)) {
+	if (!alloc_cpumask_var_node(&desc->pending_mask, gfp, node)) {
 		free_cpumask_var(desc->affinity);
 		return false;
 	}
-	cpumask_clear(desc->pending_mask);
+#endif
 #endif
 	return true;
 }
 
+static inline void init_desc_masks(struct irq_desc *desc)
+{
+	cpumask_setall(desc->affinity);
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+	cpumask_clear(desc->pending_mask);
+#endif
+}
+
 /**
  * init_copy_desc_masks - copy cpumasks for irq_desc
  * @old_desc:	pointer to old irq_desc struct
@@ -478,7 +472,7 @@ static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
 static inline void init_copy_desc_masks(struct irq_desc *old_desc,
 					struct irq_desc *new_desc)
 {
-#ifdef CONFIG_CPUMASKS_OFFSTACK
+#ifdef CONFIG_CPUMASK_OFFSTACK
 	cpumask_copy(new_desc->affinity, old_desc->affinity);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
@@ -499,12 +493,16 @@ static inline void free_desc_masks(struct irq_desc *old_desc,
 
 #else /* !CONFIG_SMP */
 
-static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
+static inline bool alloc_desc_masks(struct irq_desc *desc, int node,
 								bool boot)
 {
 	return true;
 }
 
+static inline void init_desc_masks(struct irq_desc *desc)
+{
+}
+
 static inline void init_copy_desc_masks(struct irq_desc *old_desc,
 					struct irq_desc *new_desc)
 {
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index 0c8b89f28a9..a77c6007dc9 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -81,7 +81,12 @@ static inline unsigned int kstat_irqs(unsigned int irq)
 	return sum;
 }
 
+
+/*
+ * Lock/unlock the current runqueue - to extract task statistics:
+ */
 extern unsigned long long task_delta_exec(struct task_struct *);
+
 extern void account_user_time(struct task_struct *, cputime_t, cputime_t);
 extern void account_system_time(struct task_struct *, int, cputime_t, cputime_t);
 extern void account_steal_time(cputime_t);
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index a3c984d780f..33a63f62d57 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -56,6 +56,7 @@ extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #define KT_ASCII	9
 #define KT_LOCK		10
 #define KT_SLOCK	12
+#define KT_DEAD2	13
 #define KT_BRL		14
 
 #define K(t,v)		(((t)<<8)|(v))
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
new file mode 100644
index 00000000000..7796aed6cdd
--- /dev/null
+++ b/include/linux/kmemleak.h
@@ -0,0 +1,96 @@
+/*
+ * include/linux/kmemleak.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __KMEMLEAK_H
+#define __KMEMLEAK_H
+
+#ifdef CONFIG_DEBUG_KMEMLEAK
+
+extern void kmemleak_init(void);
+extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
+			   gfp_t gfp);
+extern void kmemleak_free(const void *ptr);
+extern void kmemleak_padding(const void *ptr, unsigned long offset,
+			     size_t size);
+extern void kmemleak_not_leak(const void *ptr);
+extern void kmemleak_ignore(const void *ptr);
+extern void kmemleak_scan_area(const void *ptr, unsigned long offset,
+			       size_t length, gfp_t gfp);
+extern void kmemleak_no_scan(const void *ptr);
+
+static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
+					    int min_count, unsigned long flags,
+					    gfp_t gfp)
+{
+	if (!(flags & SLAB_NOLEAKTRACE))
+		kmemleak_alloc(ptr, size, min_count, gfp);
+}
+
+static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
+{
+	if (!(flags & SLAB_NOLEAKTRACE))
+		kmemleak_free(ptr);
+}
+
+static inline void kmemleak_erase(void **ptr)
+{
+	*ptr = NULL;
+}
+
+#else
+
+static inline void kmemleak_init(void)
+{
+}
+static inline void kmemleak_alloc(const void *ptr, size_t size, int min_count,
+				  gfp_t gfp)
+{
+}
+static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
+					    int min_count, unsigned long flags,
+					    gfp_t gfp)
+{
+}
+static inline void kmemleak_free(const void *ptr)
+{
+}
+static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
+{
+}
+static inline void kmemleak_not_leak(const void *ptr)
+{
+}
+static inline void kmemleak_ignore(const void *ptr)
+{
+}
+static inline void kmemleak_scan_area(const void *ptr, unsigned long offset,
+				      size_t length, gfp_t gfp)
+{
+}
+static inline void kmemleak_erase(void **ptr)
+{
+}
+static inline void kmemleak_no_scan(const void *ptr)
+{
+}
+
+#endif	/* CONFIG_DEBUG_KMEMLEAK */
+
+#endif	/* __KMEMLEAK_H */
diff --git a/include/linux/kmemtrace.h b/include/linux/kmemtrace.h
new file mode 100644
index 00000000000..b616d3930c3
--- /dev/null
+++ b/include/linux/kmemtrace.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2008 Eduard - Gabriel Munteanu
+ *
+ * This file is released under GPL version 2.
+ */
+
+#ifndef _LINUX_KMEMTRACE_H
+#define _LINUX_KMEMTRACE_H
+
+#ifdef __KERNEL__
+
+#include <trace/events/kmem.h>
+
+#ifdef CONFIG_KMEMTRACE
+extern void kmemtrace_init(void);
+#else
+static inline void kmemtrace_init(void)
+{
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_KMEMTRACE_H */
+
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 8cc137911b3..3db5d8d3748 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -119,7 +119,7 @@ struct kvm_run {
 			__u32 error_code;
 		} ex;
 		/* KVM_EXIT_IO */
-		struct kvm_io {
+		struct {
 #define KVM_EXIT_IO_IN  0
 #define KVM_EXIT_IO_OUT 1
 			__u8 direction;
@@ -224,10 +224,10 @@ struct kvm_interrupt {
 /* for KVM_GET_DIRTY_LOG */
 struct kvm_dirty_log {
 	__u32 slot;
-	__u32 padding;
+	__u32 padding1;
 	union {
 		void __user *dirty_bitmap; /* one bit per page */
-		__u64 padding;
+		__u64 padding2;
 	};
 };
 
@@ -409,6 +409,10 @@ struct kvm_trace_rec {
 #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
 #define KVM_CAP_DEVICE_DEASSIGNMENT 27
 #endif
+#ifdef __KVM_HAVE_MSIX
+#define KVM_CAP_DEVICE_MSIX 28
+#endif
+#define KVM_CAP_ASSIGN_DEV_IRQ 29
 /* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
 #define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
 
@@ -482,11 +486,18 @@ struct kvm_irq_routing {
 #define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \
 				   struct kvm_assigned_pci_dev)
 #define KVM_SET_GSI_ROUTING       _IOW(KVMIO, 0x6a, struct kvm_irq_routing)
+/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
 #define KVM_ASSIGN_IRQ _IOR(KVMIO, 0x70, \
 			    struct kvm_assigned_irq)
+#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO, 0x70, struct kvm_assigned_irq)
 #define KVM_REINJECT_CONTROL      _IO(KVMIO, 0x71)
 #define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \
 				     struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR \
+			_IOW(KVMIO, 0x73, struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY \
+			_IOW(KVMIO, 0x74, struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ       _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
 
 /*
  * ioctls for vcpu fds
@@ -577,6 +588,8 @@ struct kvm_debug_guest {
 #define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
 #define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
 
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
+
 struct kvm_assigned_pci_dev {
 	__u32 assigned_dev_id;
 	__u32 busnr;
@@ -587,6 +600,17 @@ struct kvm_assigned_pci_dev {
 	};
 };
 
+#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
+
+#define KVM_DEV_IRQ_HOST_MASK	 0x00ff
+#define KVM_DEV_IRQ_GUEST_MASK   0xff00
+
 struct kvm_assigned_irq {
 	__u32 assigned_dev_id;
 	__u32 host_irq;
@@ -602,9 +626,19 @@ struct kvm_assigned_irq {
 	};
 };
 
-#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
-#define KVM_DEV_IRQ_ASSIGN_MSI_ACTION	KVM_DEV_IRQ_ASSIGN_ENABLE_MSI
-#define KVM_DEV_IRQ_ASSIGN_ENABLE_MSI	(1 << 0)
+struct kvm_assigned_msix_nr {
+	__u32 assigned_dev_id;
+	__u16 entry_nr;
+	__u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV		512
+struct kvm_assigned_msix_entry {
+	__u32 assigned_dev_id;
+	__u32 gsi;
+	__u16 entry; /* The index of entry in the MSI-X table */
+	__u16 padding[3];
+};
 
 #endif
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 894a56e365e..aacc5449f58 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -38,6 +38,7 @@
 #define KVM_REQ_UNHALT             6
 #define KVM_REQ_MMU_SYNC           7
 #define KVM_REQ_KVMCLOCK_UPDATE    8
+#define KVM_REQ_KICK               9
 
 #define KVM_USERSPACE_IRQ_SOURCE_ID	0
 
@@ -72,7 +73,6 @@ struct kvm_vcpu {
 	struct mutex mutex;
 	int   cpu;
 	struct kvm_run *run;
-	int guest_mode;
 	unsigned long requests;
 	unsigned long guest_debug;
 	int fpu_active;
@@ -298,6 +298,7 @@ int kvm_arch_hardware_setup(void);
 void kvm_arch_hardware_unsetup(void);
 void kvm_arch_check_processor_compat(void *rtn);
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
 
 void kvm_free_physmem(struct kvm *kvm);
 
@@ -319,6 +320,13 @@ struct kvm_irq_ack_notifier {
 	void (*irq_acked)(struct kvm_irq_ack_notifier *kian);
 };
 
+#define KVM_ASSIGNED_MSIX_PENDING		0x1
+struct kvm_guest_msix_entry {
+	u32 vector;
+	u16 entry;
+	u16 flags;
+};
+
 struct kvm_assigned_dev_kernel {
 	struct kvm_irq_ack_notifier ack_notifier;
 	struct work_struct interrupt_work;
@@ -326,18 +334,18 @@ struct kvm_assigned_dev_kernel {
 	int assigned_dev_id;
 	int host_busnr;
 	int host_devfn;
+	unsigned int entries_nr;
 	int host_irq;
 	bool host_irq_disabled;
+	struct msix_entry *host_msix_entries;
 	int guest_irq;
-#define KVM_ASSIGNED_DEV_GUEST_INTX	(1 << 0)
-#define KVM_ASSIGNED_DEV_GUEST_MSI	(1 << 1)
-#define KVM_ASSIGNED_DEV_HOST_INTX	(1 << 8)
-#define KVM_ASSIGNED_DEV_HOST_MSI	(1 << 9)
+	struct kvm_guest_msix_entry *guest_msix_entries;
 	unsigned long irq_requested_type;
 	int irq_source_id;
 	int flags;
 	struct pci_dev *dev;
 	struct kvm *kvm;
+	spinlock_t assigned_dev_lock;
 };
 
 struct kvm_irq_mask_notifier {
@@ -360,6 +368,9 @@ void kvm_unregister_irq_ack_notifier(struct kvm_irq_ack_notifier *kian);
 int kvm_request_irq_source_id(struct kvm *kvm);
 void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id);
 
+/* For vcpu->arch.iommu_flags */
+#define KVM_IOMMU_CACHE_COHERENCY	0x1
+
 #ifdef CONFIG_IOMMU_API
 int kvm_iommu_map_pages(struct kvm *kvm, gfn_t base_gfn,
 			unsigned long npages);
diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h
index 2b8318c83e5..fb46efbeabe 100644
--- a/include/linux/kvm_types.h
+++ b/include/linux/kvm_types.h
@@ -40,4 +40,31 @@ typedef unsigned long  hfn_t;
 
 typedef hfn_t pfn_t;
 
+union kvm_ioapic_redirect_entry {
+	u64 bits;
+	struct {
+		u8 vector;
+		u8 delivery_mode:3;
+		u8 dest_mode:1;
+		u8 delivery_status:1;
+		u8 polarity:1;
+		u8 remote_irr:1;
+		u8 trig_mode:1;
+		u8 mask:1;
+		u8 reserve:7;
+		u8 reserved[4];
+		u8 dest_id;
+	} fields;
+};
+
+struct kvm_lapic_irq {
+	u32 vector;
+	u32 delivery_mode;
+	u32 dest_mode;
+	u32 level;
+	u32 trig_mode;
+	u32 shorthand;
+	u32 dest_id;
+};
+
 #endif /* __KVM_TYPES_H__ */
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 175e63f4a8c..7bc1440fc47 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -30,6 +30,10 @@ struct lguest_data
 	/* Wallclock time set by the Host. */
 	struct timespec time;
 
+	/* Interrupt pending set by the Host.  The Guest should do a hypercall
+	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+	int irq_pending;
+
 	/* Async hypercall ring.  Instead of directly making hypercalls, we can
 	 * place them in here for processing the next time the Host wants.
 	 * This batching can be quite efficient. */
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index a53407a4165..bfefbdf7498 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -57,7 +57,8 @@ enum lguest_req
 	LHREQ_INITIALIZE, /* + base, pfnlimit, start */
 	LHREQ_GETDMA, /* No longer used */
 	LHREQ_IRQ, /* + irq */
-	LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */
+	LHREQ_BREAK, /* No longer used */
+	LHREQ_EVENTFD, /* + address, fd. */
 };
 
 /* The alignment to use between consumer and producer parts of vring.
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 40725447f5e..66c194e2d9b 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -56,8 +56,7 @@ struct loop_device {
 	gfp_t		old_gfp_mask;
 
 	spinlock_t		lo_lock;
-	struct bio 		*lo_bio;
-	struct bio		*lo_biotail;
+	struct bio_list		lo_bio_list;
 	int			lo_state;
 	struct mutex		lo_ctl_mutex;
 	struct task_struct	*lo_thread;
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
new file mode 100644
index 00000000000..e461b2c3d71
--- /dev/null
+++ b/include/linux/lsm_audit.h
@@ -0,0 +1,111 @@
+/*
+ * Common LSM logging functions
+ * Heavily borrowed from selinux/avc.h
+ *
+ * Author : Etienne BASSET  <etienne.basset@ensta.org>
+ *
+ * All credits to : Stephen Smalley, <sds@epoch.ncsc.mil>
+ * All BUGS to : Etienne BASSET  <etienne.basset@ensta.org>
+ */
+#ifndef _LSM_COMMON_LOGGING_
+#define _LSM_COMMON_LOGGING_
+
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/audit.h>
+#include <linux/in6.h>
+#include <linux/path.h>
+#include <linux/key.h>
+#include <linux/skbuff.h>
+#include <asm/system.h>
+
+
+/* Auxiliary data to use in generating the audit record. */
+struct common_audit_data {
+	char    type;
+#define LSM_AUDIT_DATA_FS      1
+#define LSM_AUDIT_DATA_NET     2
+#define LSM_AUDIT_DATA_CAP     3
+#define LSM_AUDIT_DATA_IPC     4
+#define LSM_AUDIT_DATA_TASK    5
+#define LSM_AUDIT_DATA_KEY     6
+	struct task_struct *tsk;
+	union 	{
+		struct {
+			struct path path;
+			struct inode *inode;
+		} fs;
+		struct {
+			int netif;
+			struct sock *sk;
+			u16 family;
+			__be16 dport;
+			__be16 sport;
+			union {
+				struct {
+					__be32 daddr;
+					__be32 saddr;
+				} v4;
+				struct {
+					struct in6_addr daddr;
+					struct in6_addr saddr;
+				} v6;
+			} fam;
+		} net;
+		int cap;
+		int ipc_id;
+		struct task_struct *tsk;
+#ifdef CONFIG_KEYS
+		struct {
+			key_serial_t key;
+			char *key_desc;
+		} key_struct;
+#endif
+	} u;
+	const char *function;
+	/* this union contains LSM specific data */
+	union {
+		/* SMACK data */
+		struct smack_audit_data {
+			char *subject;
+			char *object;
+			char *request;
+			int result;
+		} smack_audit_data;
+		/* SELinux data */
+		struct {
+			u32 ssid;
+			u32 tsid;
+			u16 tclass;
+			u32 requested;
+			u32 audited;
+			struct av_decision *avd;
+			int result;
+		} selinux_audit_data;
+	} lsm_priv;
+	/* these callback will be implemented by a specific LSM */
+	void (*lsm_pre_audit)(struct audit_buffer *, void *);
+	void (*lsm_post_audit)(struct audit_buffer *, void *);
+};
+
+#define v4info fam.v4
+#define v6info fam.v6
+
+int ipv4_skb_to_auditdata(struct sk_buff *skb,
+		struct common_audit_data *ad, u8 *proto);
+
+int ipv6_skb_to_auditdata(struct sk_buff *skb,
+		struct common_audit_data *ad, u8 *proto);
+
+/* Initialize an LSM audit data structure. */
+#define COMMON_AUDIT_DATA_INIT(_d, _t) \
+	{ memset((_d), 0, sizeof(struct common_audit_data)); \
+	 (_d)->type = LSM_AUDIT_DATA_##_t; (_d)->function = __func__; }
+
+void common_lsm_audit(struct common_audit_data *a);
+
+#endif
diff --git a/include/linux/magic.h b/include/linux/magic.h
index 5b4e28bcb78..1923327b986 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -6,9 +6,12 @@
 #define AFS_SUPER_MAGIC                0x5346414F
 #define AUTOFS_SUPER_MAGIC	0x0187
 #define CODA_SUPER_MAGIC	0x73757245
+#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
+#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
 #define DEBUGFS_MAGIC          0x64626720
 #define SYSFS_MAGIC		0x62656572
 #define SECURITYFS_MAGIC	0x73636673
+#define SELINUX_MAGIC		0xf97cff8c
 #define TMPFS_MAGIC		0x01021994
 #define SQUASHFS_MAGIC		0x73717368
 #define EFS_SUPER_MAGIC		0x414A53
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 516d955ab8a..c377118884e 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -19,6 +19,13 @@
 	} while (0)
 
 /*
+ * data for the MMC controller
+ */
+struct tmio_mmc_data {
+	unsigned int		hclk;
+};
+
+/*
  * data for the NAND controller
  */
 struct tmio_nand_data {
diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h
deleted file mode 100644
index 1f76b1ebf62..00000000000
--- a/include/linux/mg_disk.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  include/linux/mg_disk.c
- *
- *  Support for the mGine m[g]flash IO mode.
- *  Based on legacy hd.c
- *
- * (c) 2008 mGine Co.,LTD
- * (c) 2008 unsik Kim <donari75@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __MG_DISK_H__
-#define __MG_DISK_H__
-
-#include <linux/blkdev.h>
-#include <linux/ata.h>
-
-/* name for block device */
-#define MG_DISK_NAME "mgd"
-/* name for platform device */
-#define MG_DEV_NAME "mg_disk"
-
-#define MG_DISK_MAJ 0
-#define MG_DISK_MAX_PART 16
-#define MG_SECTOR_SIZE 512
-#define MG_MAX_SECTS 256
-
-/* Register offsets */
-#define MG_BUFF_OFFSET			0x8000
-#define MG_STORAGE_BUFFER_SIZE		0x200
-#define MG_REG_OFFSET			0xC000
-#define MG_REG_FEATURE			(MG_REG_OFFSET + 2)	/* write case */
-#define MG_REG_ERROR			(MG_REG_OFFSET + 2)	/* read case */
-#define MG_REG_SECT_CNT			(MG_REG_OFFSET + 4)
-#define MG_REG_SECT_NUM			(MG_REG_OFFSET + 6)
-#define MG_REG_CYL_LOW			(MG_REG_OFFSET + 8)
-#define MG_REG_CYL_HIGH			(MG_REG_OFFSET + 0xA)
-#define MG_REG_DRV_HEAD			(MG_REG_OFFSET + 0xC)
-#define MG_REG_COMMAND			(MG_REG_OFFSET + 0xE)	/* write case */
-#define MG_REG_STATUS			(MG_REG_OFFSET + 0xE)	/* read  case */
-#define MG_REG_DRV_CTRL			(MG_REG_OFFSET + 0x10)
-#define MG_REG_BURST_CTRL		(MG_REG_OFFSET + 0x12)
-
-/* "Drive Select/Head Register" bit values */
-#define MG_REG_HEAD_MUST_BE_ON		0xA0 /* These 2 bits are always on */
-#define MG_REG_HEAD_DRIVE_MASTER	(0x00 | MG_REG_HEAD_MUST_BE_ON)
-#define MG_REG_HEAD_DRIVE_SLAVE		(0x10 | MG_REG_HEAD_MUST_BE_ON)
-#define MG_REG_HEAD_LBA_MODE		(0x40 | MG_REG_HEAD_MUST_BE_ON)
-
-
-/* "Device Control Register" bit values */
-#define MG_REG_CTRL_INTR_ENABLE			0x0
-#define MG_REG_CTRL_INTR_DISABLE		(0x1<<1)
-#define MG_REG_CTRL_RESET			(0x1<<2)
-#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH	0x0
-#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW	(0x1<<4)
-#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW		0x0
-#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH	(0x1<<5)
-#define MG_REG_CTRL_DPD_DISABLE			0x0
-#define MG_REG_CTRL_DPD_ENABLE			(0x1<<6)
-
-/* Status register bit */
-/* error bit in status register */
-#define MG_REG_STATUS_BIT_ERROR			0x01
-/* corrected error in status register */
-#define MG_REG_STATUS_BIT_CORRECTED_ERROR	0x04
-/* data request bit in status register */
-#define MG_REG_STATUS_BIT_DATA_REQ		0x08
-/* DSC - Drive Seek Complete */
-#define MG_REG_STATUS_BIT_SEEK_DONE		0x10
-/* DWF - Drive Write Fault */
-#define MG_REG_STATUS_BIT_WRITE_FAULT		0x20
-#define MG_REG_STATUS_BIT_READY			0x40
-#define MG_REG_STATUS_BIT_BUSY			0x80
-
-/* handy status */
-#define MG_STAT_READY	(MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE)
-#define MG_READY_OK(s)	(((s) & (MG_STAT_READY | \
-				(MG_REG_STATUS_BIT_BUSY | \
-				 MG_REG_STATUS_BIT_WRITE_FAULT | \
-				 MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY)
-
-/* Error register */
-#define MG_REG_ERR_AMNF		0x01
-#define MG_REG_ERR_ABRT		0x04
-#define MG_REG_ERR_IDNF		0x10
-#define MG_REG_ERR_UNC		0x40
-#define MG_REG_ERR_BBK		0x80
-
-/* error code for others */
-#define MG_ERR_NONE		0
-#define MG_ERR_TIMEOUT		0x100
-#define MG_ERR_INIT_STAT	0x101
-#define MG_ERR_TRANSLATION	0x102
-#define MG_ERR_CTRL_RST		0x103
-#define MG_ERR_INV_STAT		0x104
-#define MG_ERR_RSTOUT		0x105
-
-#define MG_MAX_ERRORS	6	/* Max read/write errors */
-
-/* command */
-#define MG_CMD_RD 0x20
-#define MG_CMD_WR 0x30
-#define MG_CMD_SLEEP 0x99
-#define MG_CMD_WAKEUP 0xC3
-#define MG_CMD_ID 0xEC
-#define MG_CMD_WR_CONF 0x3C
-#define MG_CMD_RD_CONF 0x40
-
-/* operation mode */
-#define MG_OP_CASCADE (1 << 0)
-#define MG_OP_CASCADE_SYNC_RD (1 << 1)
-#define MG_OP_CASCADE_SYNC_WR (1 << 2)
-#define MG_OP_INTERLEAVE (1 << 3)
-
-/* synchronous */
-#define MG_BURST_LAT_4 (3 << 4)
-#define MG_BURST_LAT_5 (4 << 4)
-#define MG_BURST_LAT_6 (5 << 4)
-#define MG_BURST_LAT_7 (6 << 4)
-#define MG_BURST_LAT_8 (7 << 4)
-#define MG_BURST_LEN_4 (1 << 1)
-#define MG_BURST_LEN_8 (2 << 1)
-#define MG_BURST_LEN_16 (3 << 1)
-#define MG_BURST_LEN_32 (4 << 1)
-#define MG_BURST_LEN_CONT (0 << 1)
-
-/* timeout value (unit: ms) */
-#define MG_TMAX_CONF_TO_CMD	1
-#define MG_TMAX_WAIT_RD_DRQ	10
-#define MG_TMAX_WAIT_WR_DRQ	500
-#define MG_TMAX_RST_TO_BUSY	10
-#define MG_TMAX_HDRST_TO_RDY	500
-#define MG_TMAX_SWRST_TO_RDY	500
-#define MG_TMAX_RSTOUT		3000
-
-/* device attribution */
-/* use mflash as boot device */
-#define MG_BOOT_DEV		(1 << 0)
-/* use mflash as storage device */
-#define MG_STORAGE_DEV		(1 << 1)
-/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
-#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
-
-#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
-
-/* names of GPIO resource */
-#define MG_RST_PIN	"mg_rst"
-/* except MG_BOOT_DEV, reset-out pin should be assigned */
-#define MG_RSTOUT_PIN	"mg_rstout"
-
-/* private driver data */
-struct mg_drv_data {
-	/* disk resource */
-	u32 use_polling;
-
-	/* device attribution */
-	u32 dev_attr;
-
-	/* internally used */
-	struct mg_host *host;
-};
-
-/* main structure for mflash driver */
-struct mg_host {
-	struct device *dev;
-
-	struct request_queue *breq;
-	spinlock_t lock;
-	struct gendisk *gd;
-
-	struct timer_list timer;
-	void (*mg_do_intr) (struct mg_host *);
-
-	u16 id[ATA_ID_WORDS];
-
-	u16 cyls;
-	u16 heads;
-	u16 sectors;
-	u32 n_sectors;
-	u32 nres_sectors;
-
-	void __iomem *dev_base;
-	unsigned int irq;
-	unsigned int rst;
-	unsigned int rstout;
-
-	u32 major;
-	u32 error;
-};
-
-/*
- * Debugging macro and defines
- */
-#undef DO_MG_DEBUG
-#ifdef DO_MG_DEBUG
-#  define MG_DBG(fmt, args...) \
-	printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args)
-#else /* CONFIG_MG_DEBUG */
-#  define MG_DBG(fmt, args...) do { } while (0)
-#endif /* CONFIG_MG_DEBUG */
-
-#endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
index bff1f0d475c..ad613ed66ab 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -19,6 +19,7 @@ struct anon_vma;
 struct file_ra_state;
 struct user_struct;
 struct writeback_control;
+struct rlimit;
 
 #ifndef CONFIG_DISCONTIGMEM          /* Don't use mapnrs, do it properly */
 extern unsigned long max_mapnr;
@@ -580,12 +581,10 @@ static inline void set_page_links(struct page *page, enum zone_type zone,
  */
 static inline unsigned long round_hint_to_min(unsigned long hint)
 {
-#ifdef CONFIG_SECURITY
 	hint &= PAGE_MASK;
 	if (((void *)hint != NULL) &&
 	    (hint < mmap_min_addr))
 		return PAGE_ALIGN(mmap_min_addr);
-#endif
 	return hint;
 }
 
@@ -1031,8 +1030,6 @@ extern void add_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
 extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
 					unsigned long end_pfn);
-extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn,
-					unsigned long end_pfn);
 extern void remove_all_active_ranges(void);
 extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 						unsigned long end_pfn);
@@ -1319,8 +1316,8 @@ int vmemmap_populate_basepages(struct page *start_page,
 int vmemmap_populate(struct page *start_page, unsigned long pages, int node);
 void vmemmap_populate_print_last(void);
 
-extern void *alloc_locked_buffer(size_t size);
-extern void free_locked_buffer(void *buffer, size_t size);
-extern void release_locked_buffer(void *buffer, size_t size);
+extern int account_locked_memory(struct mm_struct *mm, struct rlimit *rlim,
+				 size_t size);
+extern void refund_locked_memory(struct mm_struct *mm, size_t size);
 #endif /* __KERNEL__ */
 #endif /* _LINUX_MM_H */
diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h
index 3d1b7bde128..97491f78b08 100644
--- a/include/linux/mmiotrace.h
+++ b/include/linux/mmiotrace.h
@@ -30,6 +30,8 @@ extern unsigned int kmmio_count;
 
 extern int register_kmmio_probe(struct kmmio_probe *p);
 extern void unregister_kmmio_probe(struct kmmio_probe *p);
+extern int kmmio_init(void);
+extern void kmmio_cleanup(void);
 
 #ifdef CONFIG_MMIOTRACE
 /* kmmio is active by some kmmio_probes? */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 186ec6ab334..a47c879e130 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1097,6 +1097,32 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
 #define pfn_valid_within(pfn) (1)
 #endif
 
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+/*
+ * pfn_valid() is meant to be able to tell if a given PFN has valid memmap
+ * associated with it or not. In FLATMEM, it is expected that holes always
+ * have valid memmap as long as there is valid PFNs either side of the hole.
+ * In SPARSEMEM, it is assumed that a valid section has a memmap for the
+ * entire section.
+ *
+ * However, an ARM, and maybe other embedded architectures in the future
+ * free memmap backing holes to save memory on the assumption the memmap is
+ * never used. The page_zone linkages are then broken even though pfn_valid()
+ * returns true. A walker of the full memmap must then do this additional
+ * check to ensure the memmap they are looking at is sane by making sure
+ * the zone and PFN linkages are still valid. This is expensive, but walkers
+ * of the full memmap are extremely rare.
+ */
+int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone);
+#else
+static inline int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone)
+{
+	return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
+
 #endif /* !__GENERATING_BOUNDS.H */
 #endif /* !__ASSEMBLY__ */
 #endif /* _LINUX_MMZONE_H */
diff --git a/include/linux/module.h b/include/linux/module.h
index 627ac082e2a..a7bc6e7b43a 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -77,6 +77,7 @@ search_extable(const struct exception_table_entry *first,
 void sort_extable(struct exception_table_entry *start,
 		  struct exception_table_entry *finish);
 void sort_main_extable(void);
+void trim_init_extable(struct module *m);
 
 #ifdef MODULE
 #define MODULE_GENERIC_TABLE(gtype,name)			\
@@ -337,6 +338,14 @@ struct module
 	const char **trace_bprintk_fmt_start;
 	unsigned int num_trace_bprintk_fmt;
 #endif
+#ifdef CONFIG_EVENT_TRACING
+	struct ftrace_event_call *trace_events;
+	unsigned int num_trace_events;
+#endif
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+	unsigned long *ftrace_callsites;
+	unsigned int num_ftrace_callsites;
+#endif
 
 #ifdef CONFIG_MODULE_UNLOAD
 	/* What modules depend on me? */
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index a4f0b931846..6547c3cdbc4 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -36,9 +36,14 @@ typedef int (*param_set_fn)(const char *val, struct kernel_param *kp);
 /* Returns length written or -errno.  Buffer is 4k (ie. be short!) */
 typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
 
+/* Flag bits for kernel_param.flags */
+#define KPARAM_KMALLOCED	1
+#define KPARAM_ISBOOL		2
+
 struct kernel_param {
 	const char *name;
-	unsigned int perm;
+	u16 perm;
+	u16 flags;
 	param_set_fn set;
 	param_get_fn get;
 	union {
@@ -79,7 +84,7 @@ struct kparam_array
    parameters.  perm sets the visibility in sysfs: 000 means it's
    not there, read bits mean it's readable, write bits mean it's
    writable. */
-#define __module_param_call(prefix, name, set, get, arg, perm)		\
+#define __module_param_call(prefix, name, set, get, arg, isbool, perm)	\
 	/* Default value instead of permissions? */			\
 	static int __param_perm_check_##name __attribute__((unused)) =	\
 	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2))	\
@@ -88,10 +93,13 @@ struct kparam_array
 	static struct kernel_param __moduleparam_const __param_##name	\
 	__used								\
     __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
-	= { __param_str_##name, perm, set, get, { arg } }
+	= { __param_str_##name, perm, isbool ? KPARAM_ISBOOL : 0,	\
+	    set, get, { arg } }
 
 #define module_param_call(name, set, get, arg, perm)			      \
-	__module_param_call(MODULE_PARAM_PREFIX, name, set, get, arg, perm)
+	__module_param_call(MODULE_PARAM_PREFIX,			      \
+			    name, set, get, arg,			      \
+			    __same_type(*(arg), bool), perm)
 
 /* Helper functions: type is byte, short, ushort, int, uint, long,
    ulong, charp, bool or invbool, or XXX if you define param_get_XXX,
@@ -120,15 +128,16 @@ struct kparam_array
 #define core_param(name, var, type, perm)				\
 	param_check_##type(name, &(var));				\
 	__module_param_call("", name, param_set_##type, param_get_##type, \
-			    &var, perm)
+			    &var, __same_type(var, bool), perm)
 #endif /* !MODULE */
 
 /* Actually copy string: maxlen param is usually sizeof(string). */
 #define module_param_string(name, string, len, perm)			\
 	static const struct kparam_string __param_string_##name		\
 		= { len, string };					\
-	module_param_call(name, param_set_copystring, param_get_string,	\
-			  .str = &__param_string_##name, perm);		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    param_set_copystring, param_get_string,	\
+			    .str = &__param_string_##name, 0, perm);	\
 	__MODULE_PARM_TYPE(name, "string")
 
 /* Called on module insert or kernel boot */
@@ -186,21 +195,30 @@ extern int param_set_charp(const char *val, struct kernel_param *kp);
 extern int param_get_charp(char *buffer, struct kernel_param *kp);
 #define param_check_charp(name, p) __param_check(name, p, char *)
 
+/* For historical reasons "bool" parameters can be (unsigned) "int". */
 extern int param_set_bool(const char *val, struct kernel_param *kp);
 extern int param_get_bool(char *buffer, struct kernel_param *kp);
-#define param_check_bool(name, p) __param_check(name, p, int)
+#define param_check_bool(name, p)					\
+	static inline void __check_##name(void)				\
+	{								\
+		BUILD_BUG_ON(!__same_type(*(p), bool) &&		\
+			     !__same_type(*(p), unsigned int) &&	\
+			     !__same_type(*(p), int));			\
+	}
 
 extern int param_set_invbool(const char *val, struct kernel_param *kp);
 extern int param_get_invbool(char *buffer, struct kernel_param *kp);
-#define param_check_invbool(name, p) __param_check(name, p, int)
+#define param_check_invbool(name, p) __param_check(name, p, bool)
 
 /* Comma-separated array: *nump is set to number they actually specified. */
 #define module_param_array_named(name, array, type, nump, perm)		\
 	static const struct kparam_array __param_arr_##name		\
 	= { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type,\
 	    sizeof(array[0]), array };					\
-	module_param_call(name, param_array_set, param_array_get, 	\
-			  .arr = &__param_arr_##name, perm);		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    param_array_set, param_array_get,		\
+			    .arr = &__param_arr_##name,			\
+			    __same_type(array[0], bool), perm);		\
 	__MODULE_PARM_TYPE(name, "array of " #type)
 
 #define module_param_array(name, type, nump, perm)		\
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 51f55f903af..5d527536486 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -30,7 +30,7 @@ struct mnt_namespace;
 #define MNT_STRICTATIME 0x80
 
 #define MNT_SHRINKABLE	0x100
-#define MNT_IMBALANCED_WRITE_COUNT	0x200 /* just for debugging */
+#define MNT_WRITE_HOLD	0x200
 
 #define MNT_SHARED	0x1000	/* if the vfsmount is a shared mount */
 #define MNT_UNBINDABLE	0x2000	/* if the vfsmount is a unbindable mount */
@@ -65,13 +65,22 @@ struct vfsmount {
 	int mnt_expiry_mark;		/* true if marked for expiry */
 	int mnt_pinned;
 	int mnt_ghosts;
-	/*
-	 * This value is not stable unless all of the mnt_writers[] spinlocks
-	 * are held, and all mnt_writer[]s on this mount have 0 as their ->count
-	 */
-	atomic_t __mnt_writers;
+#ifdef CONFIG_SMP
+	int *mnt_writers;
+#else
+	int mnt_writers;
+#endif
 };
 
+static inline int *get_mnt_writers_ptr(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	return mnt->mnt_writers;
+#else
+	return &mnt->mnt_writers;
+#endif
+}
+
 static inline struct vfsmount *mntget(struct vfsmount *mnt)
 {
 	if (mnt)
@@ -79,7 +88,11 @@ static inline struct vfsmount *mntget(struct vfsmount *mnt)
 	return mnt;
 }
 
+struct file; /* forward dec */
+
 extern int mnt_want_write(struct vfsmount *mnt);
+extern int mnt_want_write_file(struct file *file);
+extern int mnt_clone_write(struct vfsmount *mnt);
 extern void mnt_drop_write(struct vfsmount *mnt);
 extern void mntput_no_expire(struct vfsmount *mnt);
 extern void mnt_pin(struct vfsmount *mnt);
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 3069ec7e0ab..878cab4f5fc 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -150,5 +150,6 @@ extern int __must_check mutex_lock_killable(struct mutex *lock);
  */
 extern int mutex_trylock(struct mutex *lock);
 extern void mutex_unlock(struct mutex *lock);
+extern int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
 
 #endif
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 518098fe63a..d870ae2faed 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -18,6 +18,7 @@ enum { MAX_NESTED_LINKS = 8 };
 struct nameidata {
 	struct path	path;
 	struct qstr	last;
+	struct path	root;
 	unsigned int	flags;
 	int		last_type;
 	unsigned	depth;
@@ -77,8 +78,8 @@ extern void release_open_intent(struct nameidata *);
 extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
 extern struct dentry *lookup_one_noperm(const char *, struct dentry *);
 
-extern int follow_down(struct vfsmount **, struct dentry **);
-extern int follow_up(struct vfsmount **, struct dentry **);
+extern int follow_down(struct path *);
+extern int follow_up(struct path *);
 
 extern struct dentry *lock_rename(struct dentry *, struct dentry *);
 extern void unlock_rename(struct dentry *, struct dentry *);
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
index 0217fb81a63..0e2e100c44a 100644
--- a/include/linux/net_dropmon.h
+++ b/include/linux/net_dropmon.h
@@ -1,6 +1,7 @@
 #ifndef __NET_DROPMON_H
 #define __NET_DROPMON_H
 
+#include <linux/types.h>
 #include <linux/netlink.h>
 
 struct net_dm_drop_point {
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 3066789b972..b2f384d4261 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -35,6 +35,9 @@ enum tcp_conntrack {
 /* Has unacknowledged data */
 #define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
 
+/* The field td_maxack has been set */
+#define IP_CT_TCP_FLAG_MAXACK_SET		0x20
+
 struct nf_ct_tcp_flags {
 	__u8 flags;
 	__u8 mask;
@@ -46,6 +49,7 @@ struct ip_ct_tcp_state {
 	u_int32_t	td_end;		/* max of seq + len */
 	u_int32_t	td_maxend;	/* max of ack + max(win, 1) */
 	u_int32_t	td_maxwin;	/* max(win) */
+	u_int32_t	td_maxack;	/* max of ack */
 	u_int8_t	td_scale;	/* window scale factor */
 	u_int8_t	flags;		/* per direction options */
 };
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
index bcd0201589f..a6d9ef2bb34 100644
--- a/include/linux/nfsd/export.h
+++ b/include/linux/nfsd/export.h
@@ -125,11 +125,9 @@ void			nfsd_export_flush(void);
 void			exp_readlock(void);
 void			exp_readunlock(void);
 struct svc_export *	rqst_exp_get_by_name(struct svc_rqst *,
-					     struct vfsmount *,
-					     struct dentry *);
+					     struct path *);
 struct svc_export *	rqst_exp_parent(struct svc_rqst *,
-					struct vfsmount *mnt,
-					struct dentry *dentry);
+					struct path *);
 int			exp_rootfh(struct auth_domain *, 
 					char *path, struct knfsd_fh *, int maxsize);
 __be32			exp_pseudoroot(struct svc_rqst *, struct svc_fh *);
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 7339c7bf733..13f126c89ae 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -18,7 +18,19 @@ struct page_cgroup {
 };
 
 void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
-void __init page_cgroup_init(void);
+
+#ifdef CONFIG_SPARSEMEM
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+extern void __init page_cgroup_init(void);
+#else
+void __init page_cgroup_init_flatmem(void);
+static inline void __init page_cgroup_init(void)
+{
+}
+#endif
+
 struct page_cgroup *lookup_page_cgroup(struct page *page);
 
 enum {
@@ -87,6 +99,10 @@ static inline void page_cgroup_init(void)
 {
 }
 
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+
 #endif
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
diff --git a/include/linux/parport.h b/include/linux/parport.h
index e1f83c5065c..38a423ed3c0 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -324,6 +324,10 @@ struct parport {
 	int spintime;
 	atomic_t ref_count;
 
+	unsigned long devflags;
+#define PARPORT_DEVPROC_REGISTERED	0
+	struct pardevice *proc_device;	/* Currently register proc device */
+
 	struct list_head full_list;
 	struct parport *slaves[3];
 };
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 06ba90c211a..9f36e1cdbf0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1005,6 +1005,7 @@
 #define PCI_DEVICE_ID_PLX_PCI200SYN	0x3196
 #define PCI_DEVICE_ID_PLX_9030          0x9030
 #define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9056		0x9056
 #define PCI_DEVICE_ID_PLX_9080		0x9080
 #define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
 
@@ -1314,6 +1315,13 @@
 
 #define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
 #define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+#define PCI_DEVICE_ID_CREATIVE_20K1	0x0005
+#define PCI_DEVICE_ID_CREATIVE_20K2	0x000b
+#define PCI_SUBDEVICE_ID_CREATIVE_SB0760	0x0024
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08801	0x0041
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08802	0x0042
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08803	0x0043
+#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX	0x6000
 
 #define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
 #define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
@@ -1406,7 +1414,7 @@
 #define PCI_DEVICE_ID_VIA_82C598_1	0x8598
 #define PCI_DEVICE_ID_VIA_838X_1	0xB188
 #define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
-#define PCI_DEVICE_ID_VIA_C409_IDE	0XC409
+#define PCI_DEVICE_ID_VIA_VX855_IDE	0xC409
 #define PCI_DEVICE_ID_VIA_ANON		0xFFFF
 
 #define PCI_VENDOR_ID_SIEMENS           0x110A
@@ -1847,6 +1855,10 @@
 #define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
 #define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
 
+#define PCI_VENDOR_ID_DIGIGRAM		0x1369
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM	0xc001
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM	0xc002
+
 #define PCI_VENDOR_ID_KAWASAKI		0x136b
 #define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
 
@@ -1996,10 +2008,12 @@
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
 #define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950	0x950B
 #define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
 #define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
 #define PCI_DEVICE_ID_OXSEMI_16PCI952PP	0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950	0x0001
 
 #define PCI_VENDOR_ID_CHELSIO		0x1425
 
@@ -2113,6 +2127,7 @@
 #define PCI_VENDOR_ID_MAINPINE		0x1522
 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
 #define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
 #define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
 #define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
 #define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 1581ff235c7..26fd9d12f05 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -86,7 +86,12 @@ struct percpu_data {
 	void *ptrs[1];
 };
 
+/* pointer disguising messes up the kmemleak objects tracking */
+#ifndef CONFIG_DEBUG_KMEMLEAK
 #define __percpu_disguise(pdata) (struct percpu_data *)~(unsigned long)(pdata)
+#else
+#define __percpu_disguise(pdata) (struct percpu_data *)(pdata)
+#endif
 
 #define per_cpu_ptr(ptr, cpu)						\
 ({									\
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
new file mode 100644
index 00000000000..1b3118a1023
--- /dev/null
+++ b/include/linux/perf_counter.h
@@ -0,0 +1,709 @@
+/*
+ *  Performance counters:
+ *
+ *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra
+ *
+ *  Data type definitions, declarations, prototypes.
+ *
+ *    Started by: Thomas Gleixner and Ingo Molnar
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+#ifndef _LINUX_PERF_COUNTER_H
+#define _LINUX_PERF_COUNTER_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+	PERF_TYPE_HARDWARE			= 0,
+	PERF_TYPE_SOFTWARE			= 1,
+	PERF_TYPE_TRACEPOINT			= 2,
+	PERF_TYPE_HW_CACHE			= 3,
+	PERF_TYPE_RAW				= 4,
+
+	PERF_TYPE_MAX,				/* non-ABI */
+};
+
+/*
+ * Generalized performance counter event types, used by the
+ * attr.event_id parameter of the sys_perf_counter_open()
+ * syscall:
+ */
+enum perf_hw_id {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES		= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+
+	PERF_COUNT_HW_MAX,			/* non-ABI */
+};
+
+/*
+ * Generalized hardware cache counters:
+ *
+ *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x
+ *       { read, write, prefetch } x
+ *       { accesses, misses }
+ */
+enum perf_hw_cache_id {
+	PERF_COUNT_HW_CACHE_L1D			= 0,
+	PERF_COUNT_HW_CACHE_L1I			= 1,
+	PERF_COUNT_HW_CACHE_LL			= 2,
+	PERF_COUNT_HW_CACHE_DTLB		= 3,
+	PERF_COUNT_HW_CACHE_ITLB		= 4,
+	PERF_COUNT_HW_CACHE_BPU			= 5,
+
+	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+	PERF_COUNT_HW_CACHE_OP_READ		= 0,
+	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
+	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
+
+	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
+	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
+
+	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
+};
+
+/*
+ * Special "software" counters provided by the kernel, even if the hardware
+ * does not support performance counters. These counters measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+	PERF_COUNT_SW_CPU_CLOCK			= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+
+	PERF_COUNT_SW_MAX,			/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_counter_sample_format {
+	PERF_SAMPLE_IP				= 1U << 0,
+	PERF_SAMPLE_TID				= 1U << 1,
+	PERF_SAMPLE_TIME			= 1U << 2,
+	PERF_SAMPLE_ADDR			= 1U << 3,
+	PERF_SAMPLE_GROUP			= 1U << 4,
+	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
+	PERF_SAMPLE_ID				= 1U << 6,
+	PERF_SAMPLE_CPU				= 1U << 7,
+	PERF_SAMPLE_PERIOD			= 1U << 8,
+
+	PERF_SAMPLE_MAX = 1U << 9,		/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.read_format to request that
+ * reads on the counter should return the indicated quantities,
+ * in increasing order of bit value, after the counter value.
+ */
+enum perf_counter_read_format {
+	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
+	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
+	PERF_FORMAT_ID				= 1U << 2,
+
+	PERF_FORMAT_MAX = 1U << 3, 		/* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+
+/*
+ * Hardware event to monitor via a performance monitoring counter:
+ */
+struct perf_counter_attr {
+
+	/*
+	 * Major type: hardware/software/tracepoint/etc.
+	 */
+	__u32			type;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
+
+	/*
+	 * Type specific configuration information.
+	 */
+	__u64			config;
+
+	union {
+		__u64		sample_period;
+		__u64		sample_freq;
+	};
+
+	__u64			sample_type;
+	__u64			read_format;
+
+	__u64			disabled       :  1, /* off by default        */
+				inherit	       :  1, /* children inherit it   */
+				pinned	       :  1, /* must always be on PMU */
+				exclusive      :  1, /* only group on PMU     */
+				exclude_user   :  1, /* don't count user      */
+				exclude_kernel :  1, /* ditto kernel          */
+				exclude_hv     :  1, /* ditto hypervisor      */
+				exclude_idle   :  1, /* don't count when idle */
+				mmap           :  1, /* include mmap data     */
+				comm	       :  1, /* include comm data     */
+				freq           :  1, /* use freq, not period  */
+
+				__reserved_1   : 53;
+
+	__u32			wakeup_events;	/* wakeup every n events */
+	__u32			__reserved_2;
+
+	__u64			__reserved_3;
+};
+
+/*
+ * Ioctls that can be done on a perf counter fd:
+ */
+#define PERF_COUNTER_IOC_ENABLE		_IO ('$', 0)
+#define PERF_COUNTER_IOC_DISABLE	_IO ('$', 1)
+#define PERF_COUNTER_IOC_REFRESH	_IO ('$', 2)
+#define PERF_COUNTER_IOC_RESET		_IO ('$', 3)
+#define PERF_COUNTER_IOC_PERIOD		_IOW('$', 4, u64)
+
+enum perf_counter_ioc_flags {
+	PERF_IOC_FLAG_GROUP		= 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_counter_mmap_page {
+	__u32	version;		/* version number of this structure */
+	__u32	compat_version;		/* lowest version this is compat with */
+
+	/*
+	 * Bits needed to read the hw counters in user-space.
+	 *
+	 *   u32 seq;
+	 *   s64 count;
+	 *
+	 *   do {
+	 *     seq = pc->lock;
+	 *
+	 *     barrier()
+	 *     if (pc->index) {
+	 *       count = pmc_read(pc->index - 1);
+	 *       count += pc->offset;
+	 *     } else
+	 *       goto regular_read;
+	 *
+	 *     barrier();
+	 *   } while (pc->lock != seq);
+	 *
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
+	 */
+	__u32	lock;			/* seqlock for synchronization */
+	__u32	index;			/* hardware counter identifier */
+	__s64	offset;			/* add to hardware counter value */
+
+	/*
+	 * Control data for the mmap() data buffer.
+	 *
+	 * User-space reading this value should issue an rmb(), on SMP capable
+	 * platforms, after reading this value -- see perf_counter_wakeup().
+	 */
+	__u64   data_head;		/* head in the data section */
+};
+
+#define PERF_EVENT_MISC_CPUMODE_MASK		(3 << 0)
+#define PERF_EVENT_MISC_CPUMODE_UNKNOWN		(0 << 0)
+#define PERF_EVENT_MISC_KERNEL			(1 << 0)
+#define PERF_EVENT_MISC_USER			(2 << 0)
+#define PERF_EVENT_MISC_HYPERVISOR		(3 << 0)
+#define PERF_EVENT_MISC_OVERFLOW		(1 << 2)
+
+struct perf_event_header {
+	__u32	type;
+	__u16	misc;
+	__u16	size;
+};
+
+enum perf_event_type {
+
+	/*
+	 * The MMAP events record the PROT_EXEC mappings so that we can
+	 * correlate userspace IPs to code. They have the following structure:
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	char				filename[];
+	 * };
+	 */
+	PERF_EVENT_MMAP			= 1,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	char				comm[];
+	 * };
+	 */
+	PERF_EVENT_COMM			= 3,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 *	u64				sample_period;
+	 * };
+	 */
+	PERF_EVENT_PERIOD		= 4,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 * };
+	 */
+	PERF_EVENT_THROTTLE		= 5,
+	PERF_EVENT_UNTHROTTLE		= 6,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 * };
+	 */
+	PERF_EVENT_FORK			= 7,
+
+	/*
+	 * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
+	 * will be PERF_RECORD_*
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	{ u64			ip;	  } && PERF_RECORD_IP
+	 *	{ u32			pid, tid; } && PERF_RECORD_TID
+	 *	{ u64			time;     } && PERF_RECORD_TIME
+	 *	{ u64			addr;     } && PERF_RECORD_ADDR
+	 *	{ u64			config;   } && PERF_RECORD_CONFIG
+	 *	{ u32			cpu, res; } && PERF_RECORD_CPU
+	 *
+	 *	{ u64			nr;
+	 *	  { u64 id, val; }	cnt[nr];  } && PERF_RECORD_GROUP
+	 *
+	 *	{ u16			nr,
+	 *				hv,
+	 *				kernel,
+	 *				user;
+	 *	  u64			ips[nr];  } && PERF_RECORD_CALLCHAIN
+	 * };
+	 */
+};
+
+#ifdef __KERNEL__
+/*
+ * Kernel-internal data types and definitions:
+ */
+
+#ifdef CONFIG_PERF_COUNTERS
+# include <asm/perf_counter.h>
+#endif
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/fs.h>
+#include <linux/pid_namespace.h>
+#include <asm/atomic.h>
+
+struct task_struct;
+
+/**
+ * struct hw_perf_counter - performance counter hardware details:
+ */
+struct hw_perf_counter {
+#ifdef CONFIG_PERF_COUNTERS
+	union {
+		struct { /* hardware */
+			u64		config;
+			unsigned long	config_base;
+			unsigned long	counter_base;
+			int		idx;
+		};
+		union { /* software */
+			atomic64_t	count;
+			struct hrtimer	hrtimer;
+		};
+	};
+	atomic64_t			prev_count;
+	u64				sample_period;
+	u64				last_period;
+	atomic64_t			period_left;
+	u64				interrupts;
+
+	u64				freq_count;
+	u64				freq_interrupts;
+	u64				freq_stamp;
+#endif
+};
+
+struct perf_counter;
+
+/**
+ * struct pmu - generic performance monitoring unit
+ */
+struct pmu {
+	int (*enable)			(struct perf_counter *counter);
+	void (*disable)			(struct perf_counter *counter);
+	void (*read)			(struct perf_counter *counter);
+	void (*unthrottle)		(struct perf_counter *counter);
+};
+
+/**
+ * enum perf_counter_active_state - the states of a counter
+ */
+enum perf_counter_active_state {
+	PERF_COUNTER_STATE_ERROR	= -2,
+	PERF_COUNTER_STATE_OFF		= -1,
+	PERF_COUNTER_STATE_INACTIVE	=  0,
+	PERF_COUNTER_STATE_ACTIVE	=  1,
+};
+
+struct file;
+
+struct perf_mmap_data {
+	struct rcu_head			rcu_head;
+	int				nr_pages;	/* nr of data pages  */
+	int				nr_locked;	/* nr pages mlocked  */
+
+	atomic_t			poll;		/* POLL_ for wakeups */
+	atomic_t			events;		/* event limit       */
+
+	atomic_long_t			head;		/* write position    */
+	atomic_long_t			done_head;	/* completed head    */
+
+	atomic_t			lock;		/* concurrent writes */
+
+	atomic_t			wakeup;		/* needs a wakeup    */
+
+	struct perf_counter_mmap_page   *user_page;
+	void				*data_pages[0];
+};
+
+struct perf_pending_entry {
+	struct perf_pending_entry *next;
+	void (*func)(struct perf_pending_entry *);
+};
+
+/**
+ * struct perf_counter - performance counter kernel representation:
+ */
+struct perf_counter {
+#ifdef CONFIG_PERF_COUNTERS
+	struct list_head		list_entry;
+	struct list_head		event_entry;
+	struct list_head		sibling_list;
+	int				nr_siblings;
+	struct perf_counter		*group_leader;
+	const struct pmu		*pmu;
+
+	enum perf_counter_active_state	state;
+	atomic64_t			count;
+
+	/*
+	 * These are the total time in nanoseconds that the counter
+	 * has been enabled (i.e. eligible to run, and the task has
+	 * been scheduled in, if this is a per-task counter)
+	 * and running (scheduled onto the CPU), respectively.
+	 *
+	 * They are computed from tstamp_enabled, tstamp_running and
+	 * tstamp_stopped when the counter is in INACTIVE or ACTIVE state.
+	 */
+	u64				total_time_enabled;
+	u64				total_time_running;
+
+	/*
+	 * These are timestamps used for computing total_time_enabled
+	 * and total_time_running when the counter is in INACTIVE or
+	 * ACTIVE state, measured in nanoseconds from an arbitrary point
+	 * in time.
+	 * tstamp_enabled: the notional time when the counter was enabled
+	 * tstamp_running: the notional time when the counter was scheduled on
+	 * tstamp_stopped: in INACTIVE state, the notional time when the
+	 *	counter was scheduled off.
+	 */
+	u64				tstamp_enabled;
+	u64				tstamp_running;
+	u64				tstamp_stopped;
+
+	struct perf_counter_attr	attr;
+	struct hw_perf_counter		hw;
+
+	struct perf_counter_context	*ctx;
+	struct file			*filp;
+
+	/*
+	 * These accumulate total time (in nanoseconds) that children
+	 * counters have been enabled and running, respectively.
+	 */
+	atomic64_t			child_total_time_enabled;
+	atomic64_t			child_total_time_running;
+
+	/*
+	 * Protect attach/detach and child_list:
+	 */
+	struct mutex			child_mutex;
+	struct list_head		child_list;
+	struct perf_counter		*parent;
+
+	int				oncpu;
+	int				cpu;
+
+	struct list_head		owner_entry;
+	struct task_struct		*owner;
+
+	/* mmap bits */
+	struct mutex			mmap_mutex;
+	atomic_t			mmap_count;
+	struct perf_mmap_data		*data;
+
+	/* poll related */
+	wait_queue_head_t		waitq;
+	struct fasync_struct		*fasync;
+
+	/* delayed work for NMIs and such */
+	int				pending_wakeup;
+	int				pending_kill;
+	int				pending_disable;
+	struct perf_pending_entry	pending;
+
+	atomic_t			event_limit;
+
+	void (*destroy)(struct perf_counter *);
+	struct rcu_head			rcu_head;
+
+	struct pid_namespace		*ns;
+	u64				id;
+#endif
+};
+
+/**
+ * struct perf_counter_context - counter context structure
+ *
+ * Used as a container for task counters and CPU counters as well:
+ */
+struct perf_counter_context {
+	/*
+	 * Protect the states of the counters in the list,
+	 * nr_active, and the list:
+	 */
+	spinlock_t			lock;
+	/*
+	 * Protect the list of counters.  Locking either mutex or lock
+	 * is sufficient to ensure the list doesn't change; to change
+	 * the list you need to lock both the mutex and the spinlock.
+	 */
+	struct mutex			mutex;
+
+	struct list_head		counter_list;
+	struct list_head		event_list;
+	int				nr_counters;
+	int				nr_active;
+	int				is_active;
+	atomic_t			refcount;
+	struct task_struct		*task;
+
+	/*
+	 * Context clock, runs when context enabled.
+	 */
+	u64				time;
+	u64				timestamp;
+
+	/*
+	 * These fields let us detect when two contexts have both
+	 * been cloned (inherited) from a common ancestor.
+	 */
+	struct perf_counter_context	*parent_ctx;
+	u64				parent_gen;
+	u64				generation;
+	int				pin_count;
+	struct rcu_head			rcu_head;
+};
+
+/**
+ * struct perf_counter_cpu_context - per cpu counter context structure
+ */
+struct perf_cpu_context {
+	struct perf_counter_context	ctx;
+	struct perf_counter_context	*task_ctx;
+	int				active_oncpu;
+	int				max_pertask;
+	int				exclusive;
+
+	/*
+	 * Recursion avoidance:
+	 *
+	 * task, softirq, irq, nmi context
+	 */
+	int				recursion[4];
+};
+
+#ifdef CONFIG_PERF_COUNTERS
+
+/*
+ * Set by architecture code:
+ */
+extern int perf_max_counters;
+
+extern const struct pmu *hw_perf_counter_init(struct perf_counter *counter);
+
+extern void perf_counter_task_sched_in(struct task_struct *task, int cpu);
+extern void perf_counter_task_sched_out(struct task_struct *task,
+					struct task_struct *next, int cpu);
+extern void perf_counter_task_tick(struct task_struct *task, int cpu);
+extern int perf_counter_init_task(struct task_struct *child);
+extern void perf_counter_exit_task(struct task_struct *child);
+extern void perf_counter_free_task(struct task_struct *task);
+extern void perf_counter_do_pending(void);
+extern void perf_counter_print_debug(void);
+extern void __perf_disable(void);
+extern bool __perf_enable(void);
+extern void perf_disable(void);
+extern void perf_enable(void);
+extern int perf_counter_task_disable(void);
+extern int perf_counter_task_enable(void);
+extern int hw_perf_group_sched_in(struct perf_counter *group_leader,
+	       struct perf_cpu_context *cpuctx,
+	       struct perf_counter_context *ctx, int cpu);
+extern void perf_counter_update_userpage(struct perf_counter *counter);
+
+struct perf_sample_data {
+	struct pt_regs			*regs;
+	u64				addr;
+	u64				period;
+};
+
+extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
+				 struct perf_sample_data *data);
+
+/*
+ * Return 1 for a software counter, 0 for a hardware counter
+ */
+static inline int is_software_counter(struct perf_counter *counter)
+{
+	return (counter->attr.type != PERF_TYPE_RAW) &&
+		(counter->attr.type != PERF_TYPE_HARDWARE) &&
+		(counter->attr.type != PERF_TYPE_HW_CACHE);
+}
+
+extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+
+extern void __perf_counter_mmap(struct vm_area_struct *vma);
+
+static inline void perf_counter_mmap(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_EXEC)
+		__perf_counter_mmap(vma);
+}
+
+extern void perf_counter_comm(struct task_struct *tsk);
+extern void perf_counter_fork(struct task_struct *tsk);
+
+extern void perf_counter_task_migration(struct task_struct *task, int cpu);
+
+#define MAX_STACK_DEPTH			255
+
+struct perf_callchain_entry {
+	u16				nr;
+	u16				hv;
+	u16				kernel;
+	u16				user;
+	u64				ip[MAX_STACK_DEPTH];
+};
+
+extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs);
+
+extern int sysctl_perf_counter_paranoid;
+extern int sysctl_perf_counter_mlock;
+extern int sysctl_perf_counter_sample_rate;
+
+extern void perf_counter_init(void);
+
+#ifndef perf_misc_flags
+#define perf_misc_flags(regs)	(user_mode(regs) ? PERF_EVENT_MISC_USER : \
+				 PERF_EVENT_MISC_KERNEL)
+#define perf_instruction_pointer(regs)	instruction_pointer(regs)
+#endif
+
+#else
+static inline void
+perf_counter_task_sched_in(struct task_struct *task, int cpu)		{ }
+static inline void
+perf_counter_task_sched_out(struct task_struct *task,
+			    struct task_struct *next, int cpu)		{ }
+static inline void
+perf_counter_task_tick(struct task_struct *task, int cpu)		{ }
+static inline int perf_counter_init_task(struct task_struct *child)	{ return 0; }
+static inline void perf_counter_exit_task(struct task_struct *child)	{ }
+static inline void perf_counter_free_task(struct task_struct *task)	{ }
+static inline void perf_counter_do_pending(void)			{ }
+static inline void perf_counter_print_debug(void)			{ }
+static inline void perf_disable(void)					{ }
+static inline void perf_enable(void)					{ }
+static inline int perf_counter_task_disable(void)	{ return -EINVAL; }
+static inline int perf_counter_task_enable(void)	{ return -EINVAL; }
+
+static inline void
+perf_swcounter_event(u32 event, u64 nr, int nmi,
+		     struct pt_regs *regs, u64 addr)			{ }
+
+static inline void perf_counter_mmap(struct vm_area_struct *vma)	{ }
+static inline void perf_counter_comm(struct task_struct *tsk)		{ }
+static inline void perf_counter_fork(struct task_struct *tsk)		{ }
+static inline void perf_counter_init(void)				{ }
+static inline void perf_counter_task_migration(struct task_struct *task,
+					       int cpu)			{ }
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_PERF_COUNTER_H */
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index c8f038554e8..b43a9e03905 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -152,5 +152,6 @@ void generic_pipe_buf_unmap(struct pipe_inode_info *, struct pipe_buffer *, void
 void generic_pipe_buf_get(struct pipe_inode_info *, struct pipe_buffer *);
 int generic_pipe_buf_confirm(struct pipe_inode_info *, struct pipe_buffer *);
 int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
+void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
 
 #endif
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 1d4e2d28982..b3f74764a58 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -382,14 +382,13 @@ struct dev_pm_info {
 #ifdef CONFIG_PM_SLEEP
 extern void device_pm_lock(void);
 extern int sysdev_resume(void);
-extern void device_power_up(pm_message_t state);
-extern void device_resume(pm_message_t state);
+extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_end(pm_message_t state);
 
 extern void device_pm_unlock(void);
 extern int sysdev_suspend(pm_message_t state);
-extern int device_power_down(pm_message_t state);
-extern int device_suspend(pm_message_t state);
-extern int device_prepare_suspend(pm_message_t state);
+extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_start(pm_message_t state);
 
 extern void __suspend_report_result(const char *function, void *fn, int ret);
 
@@ -403,7 +402,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
 #define device_pm_lock() do {} while (0)
 #define device_pm_unlock() do {} while (0)
 
-static inline int device_suspend(pm_message_t state)
+static inline int dpm_suspend_start(pm_message_t state)
 {
 	return 0;
 }
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index ca3c8877302..b063c7328ba 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -446,6 +446,7 @@ int pnp_start_dev(struct pnp_dev *dev);
 int pnp_stop_dev(struct pnp_dev *dev);
 int pnp_activate_dev(struct pnp_dev *dev);
 int pnp_disable_dev(struct pnp_dev *dev);
+int pnp_range_reserved(resource_size_t start, resource_size_t end);
 
 /* protocol helpers */
 int pnp_is_active(struct pnp_dev *dev);
@@ -476,6 +477,7 @@ static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_range_reserved(resource_size_t start, resource_size_t end) { return 0;}
 
 /* protocol helpers */
 static inline int pnp_is_active(struct pnp_dev *dev) { return 0; }
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 48d887e3c6e..b00df4c79c6 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -85,4 +85,7 @@
 #define PR_SET_TIMERSLACK 29
 #define PR_GET_TIMERSLACK 30
 
+#define PR_TASK_PERF_COUNTERS_DISABLE		31
+#define PR_TASK_PERF_COUNTERS_ENABLE		32
+
 #endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index fbfa3d44d33..e6e77d31c41 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -93,20 +93,9 @@ struct vmcore {
 
 #ifdef CONFIG_PROC_FS
 
-extern spinlock_t proc_subdir_lock;
-
 extern void proc_root_init(void);
 
 void proc_flush_task(struct task_struct *task);
-struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
-int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
-unsigned long task_vsize(struct mm_struct *);
-int task_statm(struct mm_struct *, int *, int *, int *, int *);
-void task_mem(struct seq_file *, struct mm_struct *);
-void clear_refs_smap(struct mm_struct *mm);
-
-struct proc_dir_entry *de_get(struct proc_dir_entry *de);
-void de_put(struct proc_dir_entry *de);
 
 extern struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
 						struct proc_dir_entry *parent);
@@ -116,20 +105,7 @@ struct proc_dir_entry *proc_create_data(const char *name, mode_t mode,
 				void *data);
 extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent);
 
-extern struct vfsmount *proc_mnt;
 struct pid_namespace;
-extern int proc_fill_super(struct super_block *);
-extern struct inode *proc_get_inode(struct super_block *, unsigned int, struct proc_dir_entry *);
-
-/*
- * These are generic /proc routines that use the internal
- * "struct proc_dir_entry" tree to traverse the filesystem.
- *
- * The /proc root directory has extended versions to take care
- * of the /proc/<pid> subdirectories.
- */
-extern int proc_readdir(struct file *, void *, filldir_t);
-extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
 
 extern int pid_ns_prepare_proc(struct pid_namespace *ns);
 extern void pid_ns_release_proc(struct pid_namespace *ns);
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 67c15653fc2..59e133d39d5 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -95,7 +95,6 @@ extern void __ptrace_link(struct task_struct *child,
 			  struct task_struct *new_parent);
 extern void __ptrace_unlink(struct task_struct *child);
 extern void exit_ptrace(struct task_struct *tracer);
-extern void ptrace_fork(struct task_struct *task, unsigned long clone_flags);
 #define PTRACE_MODE_READ   1
 #define PTRACE_MODE_ATTACH 2
 /* Returns 0 on success, -errno on denial. */
@@ -327,15 +326,6 @@ static inline void user_enable_block_step(struct task_struct *task)
 #define arch_ptrace_untrace(task)		do { } while (0)
 #endif
 
-#ifndef arch_ptrace_fork
-/*
- * Do machine-specific work to initialize a new task.
- *
- * This is called from copy_process().
- */
-#define arch_ptrace_fork(child, clone_flags)	do { } while (0)
-#endif
-
 extern int task_current_syscall(struct task_struct *target, long *callno,
 				unsigned long args[6], unsigned int maxargs,
 				unsigned long *sp, unsigned long *pc);
diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h
index 787d19ea9f4..8b9aee1a9ce 100644
--- a/include/linux/qnx4_fs.h
+++ b/include/linux/qnx4_fs.h
@@ -85,65 +85,4 @@ struct qnx4_super_block {
 	struct qnx4_inode_entry AltBoot;
 };
 
-#ifdef __KERNEL__
-
-#define QNX4_DEBUG 0
-
-#if QNX4_DEBUG
-#define QNX4DEBUG(X) printk X
-#else
-#define QNX4DEBUG(X) (void) 0
-#endif
-
-struct qnx4_sb_info {
-	struct buffer_head	*sb_buf;	/* superblock buffer */
-	struct qnx4_super_block	*sb;		/* our superblock */
-	unsigned int		Version;	/* may be useful */
-	struct qnx4_inode_entry	*BitMap;	/* useful */
-};
-
-struct qnx4_inode_info {
-	struct qnx4_inode_entry raw;
-	loff_t mmu_private;
-	struct inode vfs_inode;
-};
-
-extern struct inode *qnx4_iget(struct super_block *, unsigned long);
-extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd);
-extern unsigned long qnx4_count_free_blocks(struct super_block *sb);
-extern unsigned long qnx4_block_map(struct inode *inode, long iblock);
-
-extern struct buffer_head *qnx4_bread(struct inode *, int, int);
-
-extern const struct inode_operations qnx4_file_inode_operations;
-extern const struct inode_operations qnx4_dir_inode_operations;
-extern const struct file_operations qnx4_file_operations;
-extern const struct file_operations qnx4_dir_operations;
-extern int qnx4_is_free(struct super_block *sb, long block);
-extern int qnx4_set_bitmap(struct super_block *sb, long block, int busy);
-extern int qnx4_create(struct inode *inode, struct dentry *dentry, int mode, struct nameidata *nd);
-extern void qnx4_truncate(struct inode *inode);
-extern void qnx4_free_inode(struct inode *inode);
-extern int qnx4_unlink(struct inode *dir, struct dentry *dentry);
-extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry);
-extern int qnx4_sync_file(struct file *file, struct dentry *dentry, int);
-extern int qnx4_sync_inode(struct inode *inode);
-
-static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb)
-{
-	return sb->s_fs_info;
-}
-
-static inline struct qnx4_inode_info *qnx4_i(struct inode *inode)
-{
-	return container_of(inode, struct qnx4_inode_info, vfs_inode);
-}
-
-static inline struct qnx4_inode_entry *qnx4_raw_inode(struct inode *inode)
-{
-	return &qnx4_i(inode)->raw;
-}
-
-#endif				/* __KERNEL__ */
-
 #endif
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 36353d95c8d..7bc45759368 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -20,7 +20,12 @@ static inline struct quota_info *sb_dqopt(struct super_block *sb)
 /*
  * declaration of quota_function calls in kernel.
  */
-void sync_dquots(struct super_block *sb, int type);
+void sync_quota_sb(struct super_block *sb, int type);
+static inline void writeout_quota_sb(struct super_block *sb, int type)
+{
+	if (sb->s_qcop->quota_sync)
+		sb->s_qcop->quota_sync(sb, type);
+}
 
 int dquot_initialize(struct inode *inode, int type);
 int dquot_drop(struct inode *inode);
@@ -253,12 +258,7 @@ static inline void vfs_dq_free_inode(struct inode *inode)
 		inode->i_sb->dq_op->free_inode(inode, 1);
 }
 
-/* The following two functions cannot be called inside a transaction */
-static inline void vfs_dq_sync(struct super_block *sb)
-{
-	sync_dquots(sb, -1);
-}
-
+/* Cannot be called inside a transaction */
 static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	int ret = -ENOSYS;
@@ -334,7 +334,11 @@ static inline void vfs_dq_free_inode(struct inode *inode)
 {
 }
 
-static inline void vfs_dq_sync(struct super_block *sb)
+static inline void sync_quota_sb(struct super_block *sb, int type)
+{
+}
+
+static inline void writeout_quota_sb(struct super_block *sb, int type)
 {
 }
 
diff --git a/include/linux/rational.h b/include/linux/rational.h
new file mode 100644
index 00000000000..4f532fcd9ee
--- /dev/null
+++ b/include/linux/rational.h
@@ -0,0 +1,19 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers,
+ * e.g. when calculating optimum numerator/denominator pairs for
+ * pll configuration taking into account restricted register size
+ */
+
+#ifndef _LINUX_RATIONAL_H
+#define _LINUX_RATIONAL_H
+
+void rational_best_approximation(
+	unsigned long given_numerator, unsigned long given_denominator,
+	unsigned long max_numerator, unsigned long max_denominator,
+	unsigned long *best_numerator, unsigned long *best_denominator);
+
+#endif /* _LINUX_RATIONAL_H */
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index e649bd3f2c9..5710f43bbc9 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -198,6 +198,32 @@ static inline void list_splice_init_rcu(struct list_head *list,
 	at->prev = last;
 }
 
+/**
+ * list_entry_rcu - get the struct for this entry
+ * @ptr:        the &struct list_head pointer.
+ * @type:       the type of the struct this is embedded in.
+ * @member:     the name of the list_struct within the struct.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ */
+#define list_entry_rcu(ptr, type, member) \
+	container_of(rcu_dereference(ptr), type, member)
+
+/**
+ * list_first_entry_rcu - get the first element from a list
+ * @ptr:        the list head to take the element from.
+ * @type:       the type of the struct this is embedded in.
+ * @member:     the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ */
+#define list_first_entry_rcu(ptr, type, member) \
+	list_entry_rcu((ptr)->next, type, member)
+
 #define __list_for_each_rcu(pos, head) \
 	for (pos = rcu_dereference((head)->next); \
 		pos != (head); \
@@ -214,9 +240,9 @@ static inline void list_splice_init_rcu(struct list_head *list,
  * as long as the traversal is guarded by rcu_read_lock().
  */
 #define list_for_each_entry_rcu(pos, head, member) \
-	for (pos = list_entry(rcu_dereference((head)->next), typeof(*pos), member); \
+	for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
 		prefetch(pos->member.next), &pos->member != (head); \
-		pos = list_entry(rcu_dereference(pos->member.next), typeof(*pos), member))
+		pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
 
 
 /**
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 58b2aa5312b..5a5153806c4 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -161,8 +161,15 @@ struct rcu_data {
 	unsigned long offline_fqs;	/* Kicked due to being offline. */
 	unsigned long resched_ipi;	/* Sent a resched IPI. */
 
-	/* 5) For future __rcu_pending statistics. */
+	/* 5) __rcu_pending() statistics. */
 	long n_rcu_pending;		/* rcu_pending() calls since boot. */
+	long n_rp_qs_pending;
+	long n_rp_cb_ready;
+	long n_rp_cpu_needs_gp;
+	long n_rp_gp_completed;
+	long n_rp_gp_started;
+	long n_rp_need_fqs;
+	long n_rp_need_nothing;
 
 	int cpu;
 };
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 6473650c28f..dab68bbed67 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -453,6 +453,7 @@ enum reiserfs_mount_options {
 	REISERFS_ATTRS,
 	REISERFS_XATTRS_USER,
 	REISERFS_POSIXACL,
+	REISERFS_EXPOSE_PRIVROOT,
 	REISERFS_BARRIER_NONE,
 	REISERFS_BARRIER_FLUSH,
 
@@ -490,6 +491,7 @@ enum reiserfs_mount_options {
 #define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
 #define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
 #define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
+#define reiserfs_expose_privroot(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_EXPOSE_PRIVROOT))
 #define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
 #define reiserfs_barrier_none(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_NONE))
 #define reiserfs_barrier_flush(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_FLUSH))
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index cdedc01036e..99928dce37e 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -41,6 +41,7 @@ int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
 int reiserfs_lookup_privroot(struct super_block *sb);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
+int reiserfs_permission(struct inode *inode, int mask);
 
 #ifdef CONFIG_REISERFS_FS_XATTR
 #define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
@@ -50,7 +51,6 @@ int reiserfs_setxattr(struct dentry *dentry, const char *name,
 		      const void *value, size_t size, int flags);
 ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size);
 int reiserfs_removexattr(struct dentry *dentry, const char *name);
-int reiserfs_permission(struct inode *inode, int mask);
 
 int reiserfs_xattr_get(struct inode *, const char *, void *, size_t);
 int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int);
@@ -117,8 +117,6 @@ static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
 #define reiserfs_listxattr NULL
 #define reiserfs_removexattr NULL
 
-#define reiserfs_permission NULL
-
 static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
 {
 }
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index e1b7b217388..8670f1575fe 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -11,7 +11,7 @@ struct ring_buffer_iter;
  * Don't refer to this struct directly, use functions below.
  */
 struct ring_buffer_event {
-	u32		type:2, len:3, time_delta:27;
+	u32		type_len:5, time_delta:27;
 	u32		array[];
 };
 
@@ -24,7 +24,8 @@ struct ring_buffer_event {
  *				  size is variable depending on how much
  *				  padding is needed
  *				 If time_delta is non zero:
- *				  everything else same as RINGBUF_TYPE_DATA
+ *				  array[0] holds the actual length
+ *				  size = 4 + length (bytes)
  *
  * @RINGBUF_TYPE_TIME_EXTEND:	Extend the time delta
  *				 array[0] = time delta (28 .. 59)
@@ -35,22 +36,23 @@ struct ring_buffer_event {
  *				 array[1..2] = tv_sec
  *				 size = 16 bytes
  *
- * @RINGBUF_TYPE_DATA:		Data record
- *				 If len is zero:
+ * <= @RINGBUF_TYPE_DATA_TYPE_LEN_MAX:
+ *				Data record
+ *				 If type_len is zero:
  *				  array[0] holds the actual length
  *				  array[1..(length+3)/4] holds data
- *				  size = 4 + 4 + length (bytes)
+ *				  size = 4 + length (bytes)
  *				 else
- *				  length = len << 2
+ *				  length = type_len << 2
  *				  array[0..(length+3)/4-1] holds data
  *				  size = 4 + length (bytes)
  */
 enum ring_buffer_type {
+	RINGBUF_TYPE_DATA_TYPE_LEN_MAX = 28,
 	RINGBUF_TYPE_PADDING,
 	RINGBUF_TYPE_TIME_EXTEND,
 	/* FIXME: RINGBUF_TYPE_TIME_STAMP not implemented */
 	RINGBUF_TYPE_TIME_STAMP,
-	RINGBUF_TYPE_DATA,
 };
 
 unsigned ring_buffer_event_length(struct ring_buffer_event *event);
@@ -68,13 +70,54 @@ ring_buffer_event_time_delta(struct ring_buffer_event *event)
 	return event->time_delta;
 }
 
+/*
+ * ring_buffer_event_discard can discard any event in the ring buffer.
+ *   it is up to the caller to protect against a reader from
+ *   consuming it or a writer from wrapping and replacing it.
+ *
+ * No external protection is needed if this is called before
+ * the event is commited. But in that case it would be better to
+ * use ring_buffer_discard_commit.
+ *
+ * Note, if an event that has not been committed is discarded
+ * with ring_buffer_event_discard, it must still be committed.
+ */
 void ring_buffer_event_discard(struct ring_buffer_event *event);
 
 /*
+ * ring_buffer_discard_commit will remove an event that has not
+ *   ben committed yet. If this is used, then ring_buffer_unlock_commit
+ *   must not be called on the discarded event. This function
+ *   will try to remove the event from the ring buffer completely
+ *   if another event has not been written after it.
+ *
+ * Example use:
+ *
+ *  if (some_condition)
+ *    ring_buffer_discard_commit(buffer, event);
+ *  else
+ *    ring_buffer_unlock_commit(buffer, event);
+ */
+void ring_buffer_discard_commit(struct ring_buffer *buffer,
+				struct ring_buffer_event *event);
+
+/*
  * size is in bytes for each per CPU buffer.
  */
 struct ring_buffer *
-ring_buffer_alloc(unsigned long size, unsigned flags);
+__ring_buffer_alloc(unsigned long size, unsigned flags, struct lock_class_key *key);
+
+/*
+ * Because the ring buffer is generic, if other users of the ring buffer get
+ * traced by ftrace, it can produce lockdep warnings. We need to keep each
+ * ring buffer's lock class separate.
+ */
+#define ring_buffer_alloc(size, flags)			\
+({							\
+	static struct lock_class_key __key;		\
+	__ring_buffer_alloc((size), (flags), &__key);	\
+})
+
 void ring_buffer_free(struct ring_buffer *buffer);
 
 int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size);
@@ -122,6 +165,8 @@ unsigned long ring_buffer_entries(struct ring_buffer *buffer);
 unsigned long ring_buffer_overruns(struct ring_buffer *buffer);
 unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu);
 unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_nmi_dropped_cpu(struct ring_buffer *buffer, int cpu);
 
 u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu);
 void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
@@ -137,6 +182,11 @@ void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data);
 int ring_buffer_read_page(struct ring_buffer *buffer, void **data_page,
 			  size_t len, int cpu, int full);
 
+struct trace_seq;
+
+int ring_buffer_print_entry_header(struct trace_seq *s);
+int ring_buffer_print_page_header(struct trace_seq *s);
+
 enum ring_buffer_flags {
 	RB_FL_OVERWRITE		= 1 << 0,
 };
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b4c38bc8049..4896fdfec91 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -77,6 +77,7 @@ struct sched_param {
 #include <linux/proportions.h>
 #include <linux/seccomp.h>
 #include <linux/rcupdate.h>
+#include <linux/rculist.h>
 #include <linux/rtmutex.h>
 
 #include <linux/time.h>
@@ -96,8 +97,9 @@ struct exec_domain;
 struct futex_pi_state;
 struct robust_list_head;
 struct bio;
-struct bts_tracer;
 struct fs_struct;
+struct bts_context;
+struct perf_counter_context;
 
 /*
  * List of flags we want to share for kernel threads,
@@ -116,6 +118,7 @@ struct fs_struct;
  *    11 bit fractions.
  */
 extern unsigned long avenrun[];		/* Load averages */
+extern void get_avenrun(unsigned long *loads, unsigned long offset, int shift);
 
 #define FSHIFT		11		/* nr of bits of precision */
 #define FIXED_1		(1<<FSHIFT)	/* 1.0 as fixed-point */
@@ -135,8 +138,9 @@ DECLARE_PER_CPU(unsigned long, process_counts);
 extern int nr_processes(void);
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
-extern unsigned long nr_active(void);
 extern unsigned long nr_iowait(void);
+extern void calc_global_load(void);
+extern u64 cpu_nr_migrations(int cpu);
 
 extern unsigned long get_parent_ip(unsigned long addr);
 
@@ -672,6 +676,10 @@ struct user_struct {
 	struct work_struct work;
 #endif
 #endif
+
+#ifdef CONFIG_PERF_COUNTERS
+	atomic_long_t locked_vm;
+#endif
 };
 
 extern int uids_sysfs_init(void);
@@ -838,7 +846,17 @@ struct sched_group {
 	 */
 	u32 reciprocal_cpu_power;
 
-	unsigned long cpumask[];
+	/*
+	 * The CPUs this group covers.
+	 *
+	 * NOTE: this field is variable length. (Allocated dynamically
+	 * by attaching extra space to the end of the structure,
+	 * depending on how many CPUs the kernel has booted up with)
+	 *
+	 * It is also be embedded into static data structures at build
+	 * time. (See 'struct static_sched_group' in kernel/sched.c)
+	 */
+	unsigned long cpumask[0];
 };
 
 static inline struct cpumask *sched_group_cpus(struct sched_group *sg)
@@ -924,8 +942,17 @@ struct sched_domain {
 	char *name;
 #endif
 
-	/* span of all CPUs in this domain */
-	unsigned long span[];
+	/*
+	 * Span of all CPUs in this domain.
+	 *
+	 * NOTE: this field is variable length. (Allocated dynamically
+	 * by attaching extra space to the end of the structure,
+	 * depending on how many CPUs the kernel has booted up with)
+	 *
+	 * It is also be embedded into static data structures at build
+	 * time. (See 'struct static_sched_domain' in kernel/sched.c)
+	 */
+	unsigned long span[0];
 };
 
 static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
@@ -1052,9 +1079,10 @@ struct sched_entity {
 	u64			last_wakeup;
 	u64			avg_overlap;
 
+	u64			nr_migrations;
+
 	u64			start_runtime;
 	u64			avg_wakeup;
-	u64			nr_migrations;
 
 #ifdef CONFIG_SCHEDSTATS
 	u64			wait_start;
@@ -1209,18 +1237,11 @@ struct task_struct {
 	struct list_head ptraced;
 	struct list_head ptrace_entry;
 
-#ifdef CONFIG_X86_PTRACE_BTS
 	/*
 	 * This is the tracer handle for the ptrace BTS extension.
 	 * This field actually belongs to the ptracer task.
 	 */
-	struct bts_tracer *bts;
-	/*
-	 * The buffer to hold the BTS data.
-	 */
-	void *bts_buffer;
-	size_t bts_size;
-#endif /* CONFIG_X86_PTRACE_BTS */
+	struct bts_context *bts;
 
 	/* PID/PID hash table linkage. */
 	struct pid_link pids[PIDTYPE_MAX];
@@ -1247,7 +1268,9 @@ struct task_struct {
 					 * credentials (COW) */
 	const struct cred *cred;	/* effective (overridable) subjective task
 					 * credentials (COW) */
-	struct mutex cred_exec_mutex;	/* execve vs ptrace cred calculation mutex */
+	struct mutex cred_guard_mutex;	/* guard against foreign influences on
+					 * credential calculations
+					 * (notably. ptrace) */
 
 	char comm[TASK_COMM_LEN]; /* executable name excluding path
 				     - access with [gs]et_task_comm (which lock
@@ -1380,6 +1403,11 @@ struct task_struct {
 	struct list_head pi_state_list;
 	struct futex_pi_state *pi_state_cache;
 #endif
+#ifdef CONFIG_PERF_COUNTERS
+	struct perf_counter_context *perf_counter_ctxp;
+	struct mutex perf_counter_mutex;
+	struct list_head perf_counter_list;
+#endif
 #ifdef CONFIG_NUMA
 	struct mempolicy *mempolicy;
 	short il_next;
@@ -1428,7 +1456,9 @@ struct task_struct {
 #ifdef CONFIG_TRACING
 	/* state flags for use by tracers */
 	unsigned long trace;
-#endif
+	/* bitmask of trace recursion */
+	unsigned long trace_recursion;
+#endif /* CONFIG_TRACING */
 };
 
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
@@ -1885,6 +1915,7 @@ extern void sched_dead(struct task_struct *p);
 
 extern void proc_caches_init(void);
 extern void flush_signals(struct task_struct *);
+extern void __flush_signals(struct task_struct *);
 extern void ignore_signals(struct task_struct *);
 extern void flush_signal_handlers(struct task_struct *, int force_default);
 extern int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info);
@@ -2001,8 +2032,10 @@ extern void set_task_comm(struct task_struct *tsk, char *from);
 extern char *get_task_comm(char *to, struct task_struct *tsk);
 
 #ifdef CONFIG_SMP
+extern void wait_task_context_switch(struct task_struct *p);
 extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
 #else
+static inline void wait_task_context_switch(struct task_struct *p) {}
 static inline unsigned long wait_task_inactive(struct task_struct *p,
 					       long match_state)
 {
@@ -2010,7 +2043,8 @@ static inline unsigned long wait_task_inactive(struct task_struct *p,
 }
 #endif
 
-#define next_task(p)	list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)
+#define next_task(p) \
+	list_entry_rcu((p)->tasks.next, struct task_struct, tasks)
 
 #define for_each_process(p) \
 	for (p = &init_task ; (p = next_task(p)) != &init_task ; )
@@ -2049,8 +2083,8 @@ int same_thread_group(struct task_struct *p1, struct task_struct *p2)
 
 static inline struct task_struct *next_thread(const struct task_struct *p)
 {
-	return list_entry(rcu_dereference(p->thread_group.next),
-			  struct task_struct, thread_group);
+	return list_entry_rcu(p->thread_group.next,
+			      struct task_struct, thread_group);
 }
 
 static inline int thread_group_empty(struct task_struct *p)
@@ -2388,6 +2422,13 @@ static inline void inc_syscw(struct task_struct *tsk)
 #define TASK_SIZE_OF(tsk)	TASK_SIZE
 #endif
 
+/*
+ * Call the function if the target task is executing on a CPU right now:
+ */
+extern void task_oncpu_function_call(struct task_struct *p,
+				     void (*func) (void *info), void *info);
+
+
 #ifdef CONFIG_MM_OWNER
 extern void mm_update_next_owner(struct mm_struct *mm);
 extern void mm_init_owner(struct mm_struct *mm, struct task_struct *p);
diff --git a/include/linux/security.h b/include/linux/security.h
index d5fd6163606..5eff459b383 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -2197,6 +2197,8 @@ static inline int security_file_mmap(struct file *file, unsigned long reqprot,
 				     unsigned long addr,
 				     unsigned long addr_only)
 {
+	if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
+		return -EACCES;
 	return 0;
 }
 
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 9136cc5608c..e5bb75a6380 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -96,54 +96,76 @@ struct serial_uart_config {
 
 /*
  * Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
  */
-#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-				   on the callout port */
-#define ASYNC_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNC_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define ASYNC_SPD_MASK	0x1030
-#define ASYNC_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define ASYNC_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define ASYNC_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define ASYNC_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define ASYNC_HARDPPS_CD	0x0800	/* Call hardpps when CD goes high  */
-
-#define ASYNC_SPD_SHI	0x1000	/* Use 230400 instead of 38400 bps */
-#define ASYNC_SPD_WARP	0x1010	/* Use 460800 instead of 38400 bps */
-
-#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
-
-#define ASYNC_BUGGY_UART  0x4000 /* This is a buggy UART, skip some safety
-				  * checks.  Note: can be dangerous! */
-
-#define ASYNC_AUTOPROBE	 0x8000 /* Port was autoprobed by PCI or PNP code */
-
-#define ASYNC_FLAGS	0x7FFF	/* Possible legal async flags */
-#define ASYNC_USR_MASK	0x3430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ASYNC_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define ASYNC_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define ASYNC_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define ASYNC_CLOSING		0x08000000 /* Serial port is closing */
-#define ASYNC_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define ASYNC_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-#define ASYNC_SHARE_IRQ		0x01000000 /* for multifunction cards
-					     --- no longer used */
-#define ASYNC_CONS_FLOW		0x00800000 /* flow control for console  */
-
-#define ASYNC_BOOT_ONLYMCA	0x00400000 /* Probe only if MCA bus */
-#define ASYNC_INTERNAL_FLAGS	0xFFC00000 /* Internal flags */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI| \
+		ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 57a97e52e58..6fd80c4243f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -41,7 +41,8 @@
 #define PORT_XSCALE	15
 #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
 #define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_MAX_8250	17	/* max port ID */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_MAX_8250	18	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -167,6 +168,9 @@
 /* MAX3100 */
 #define PORT_MAX3100    86
 
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 893cc53486b..1c297ddc9d5 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -25,8 +25,7 @@ struct plat_sci_port {
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	type;			/* SCI / SCIF / IRDA */
 	upf_t		flags;			/* UPF_* flags */
+	char		*clk;			/* clock string */
 };
 
-int early_sci_setup(struct uart_port *port);
-
 #endif /* __LINUX_SERIAL_SCI_H */
diff --git a/include/linux/sh_cmt.h b/include/linux/sh_cmt.h
deleted file mode 100644
index 68cacde5954..00000000000
--- a/include/linux/sh_cmt.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __SH_CMT_H__
-#define __SH_CMT_H__
-
-struct sh_cmt_config {
-	char *name;
-	unsigned long channel_offset;
-	int timer_bit;
-	char *clk;
-	unsigned long clockevent_rating;
-	unsigned long clocksource_rating;
-};
-
-#endif /* __SH_CMT_H__ */
diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h
new file mode 100644
index 00000000000..864bd56bd3b
--- /dev/null
+++ b/include/linux/sh_timer.h
@@ -0,0 +1,13 @@
+#ifndef __SH_TIMER_H__
+#define __SH_TIMER_H__
+
+struct sh_timer_config {
+	char *name;
+	long channel_offset;
+	int timer_bit;
+	char *clk;
+	unsigned long clockevent_rating;
+	unsigned long clocksource_rating;
+};
+
+#endif /* __SH_TIMER_H__ */
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 84f997f8aa5..c7552836bd9 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -235,6 +235,8 @@ static inline int valid_signal(unsigned long sig)
 extern int next_signal(struct sigpending *pending, sigset_t *mask);
 extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
 extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
+extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
+				 siginfo_t *info);
 extern long do_sigpending(void __user *, unsigned long);
 extern int sigprocmask(int, sigset_t *, sigset_t *);
 extern int show_unhandled_signals;
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 24c5602bee9..219b8fb4651 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -62,6 +62,8 @@
 # define SLAB_DEBUG_OBJECTS	0x00000000UL
 #endif
 
+#define SLAB_NOLEAKTRACE	0x00800000UL	/* Avoid kmemleak tracing */
+
 /* The following flags affect the page allocator grouping pages by mobility */
 #define SLAB_RECLAIM_ACCOUNT	0x00020000UL		/* Objects are reclaimable */
 #define SLAB_TEMPORARY		SLAB_RECLAIM_ACCOUNT	/* Objects are short-lived */
@@ -317,4 +319,6 @@ static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
 	return kmalloc_node(size, flags | __GFP_ZERO, node);
 }
 
+void __init kmem_cache_init_late(void);
+
 #endif	/* _LINUX_SLAB_H */
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
index 5ac9b0bcaf9..713f841ecaa 100644
--- a/include/linux/slab_def.h
+++ b/include/linux/slab_def.h
@@ -14,7 +14,7 @@
 #include <asm/page.h>		/* kmalloc_sizes.h needs PAGE_SIZE */
 #include <asm/cache.h>		/* kmalloc_sizes.h needs L1_CACHE_BYTES */
 #include <linux/compiler.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
 
 /* Size description struct for general caches. */
 struct cache_sizes {
diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h
index 0ec00b39d00..bb5368df4be 100644
--- a/include/linux/slob_def.h
+++ b/include/linux/slob_def.h
@@ -34,4 +34,9 @@ static __always_inline void *__kmalloc(size_t size, gfp_t flags)
 	return kmalloc(size, flags);
 }
 
+static inline void kmem_cache_init_late(void)
+{
+	/* Nothing to do */
+}
+
 #endif /* __LINUX_SLOB_DEF_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 5046f90c117..4dcbc2c7149 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -10,7 +10,7 @@
 #include <linux/gfp.h>
 #include <linux/workqueue.h>
 #include <linux/kobject.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
 
 enum stat_item {
 	ALLOC_FASTPATH,		/* Allocation from cpu slab */
@@ -302,4 +302,6 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
 }
 #endif
 
+void __init kmem_cache_init_late(void);
+
 #endif /* _LINUX_SLUB_DEF_H */
diff --git a/include/linux/spinlock_up.h b/include/linux/spinlock_up.h
index 938234c4a99..d4841ed8215 100644
--- a/include/linux/spinlock_up.h
+++ b/include/linux/spinlock_up.h
@@ -60,6 +60,7 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lock)
 #define __raw_spin_is_locked(lock)	((void)(lock), 0)
 /* for sched.c and kernel_lock.c: */
 # define __raw_spin_lock(lock)		do { (void)(lock); } while (0)
+# define __raw_spin_lock_flags(lock, flags)	do { (void)(lock); } while (0)
 # define __raw_spin_unlock(lock)	do { (void)(lock); } while (0)
 # define __raw_spin_trylock(lock)	({ (void)(lock); 1; })
 #endif /* DEBUG_SPINLOCK */
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 5f3faa9d15a..18e7c7c0cae 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -11,8 +11,7 @@
 #include <linux/pipe_fs_i.h>
 
 /*
- * splice is tied to pipes as a transport (at least for now), so we'll just
- * add the splice flags here.
+ * Flags passed in from splice/tee/vmsplice
  */
 #define SPLICE_F_MOVE	(0x01)	/* move pages instead of copying */
 #define SPLICE_F_NONBLOCK (0x02) /* don't block on the pipe splicing (but */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 795032edfc4..cd15df6c63c 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -245,11 +245,6 @@ extern unsigned long get_safe_page(gfp_t gfp_mask);
 
 extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
 extern int hibernate(void);
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
 extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
@@ -258,6 +253,16 @@ static inline void swsusp_unset_page_free(struct page *p) {}
 
 static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
 static inline int hibernate(void) { return -ENOSYS; }
+static inline bool system_entering_hibernation(void) { return false; }
+#endif /* CONFIG_HIBERNATION */
+
+#ifdef CONFIG_HIBERNATION_NVS
+extern int hibernate_nvs_register(unsigned long start, unsigned long size);
+extern int hibernate_nvs_alloc(void);
+extern void hibernate_nvs_free(void);
+extern void hibernate_nvs_save(void);
+extern void hibernate_nvs_restore(void);
+#else /* CONFIG_HIBERNATION_NVS */
 static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
@@ -266,8 +271,7 @@ static inline int hibernate_nvs_alloc(void) { return 0; }
 static inline void hibernate_nvs_free(void) {}
 static inline void hibernate_nvs_save(void) {}
 static inline void hibernate_nvs_restore(void) {}
-static inline bool system_entering_hibernation(void) { return false; }
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION_NVS */
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 62d81435347..d476aad3ff5 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -437,6 +437,11 @@ static inline int mem_cgroup_cache_charge_swapin(struct page *page,
 	return 0;
 }
 
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+{
+}
+
 #endif /* CONFIG_SWAP */
 #endif /* __KERNEL__*/
 #endif /* _LINUX_SWAP_H */
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index ac9ff54f7cb..cb1a6631b8f 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -29,7 +29,8 @@ extern void *swiotlb_alloc(unsigned order, unsigned long nslabs);
 
 extern dma_addr_t swiotlb_phys_to_bus(struct device *hwdev,
 				      phys_addr_t address);
-extern phys_addr_t swiotlb_bus_to_phys(dma_addr_t address);
+extern phys_addr_t swiotlb_bus_to_phys(struct device *hwdev,
+				       dma_addr_t address);
 
 extern int swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size);
 
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 30520844b8d..418d90f5eff 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -55,6 +55,7 @@ struct compat_timeval;
 struct robust_list_head;
 struct getcpu_cache;
 struct old_linux_dirent;
+struct perf_counter_attr;
 
 #include <linux/types.h>
 #include <linux/aio_abi.h>
@@ -755,4 +756,8 @@ asmlinkage long sys_pipe(int __user *);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
+
+asmlinkage long sys_perf_counter_open(
+		struct perf_counter_attr __user *attr_uptr,
+		pid_t pid, int cpu, int group_fd, unsigned long flags);
 #endif
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
index e6b820f8b56..a8cc4e13434 100644
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -21,13 +21,14 @@ struct restart_block {
 		struct {
 			unsigned long arg0, arg1, arg2, arg3;
 		};
-		/* For futex_wait */
+		/* For futex_wait and futex_wait_requeue_pi */
 		struct {
 			u32 *uaddr;
 			u32 val;
 			u32 flags;
 			u32 bitset;
 			u64 time;
+			u32 *uaddr2;
 		} futex;
 		/* For nanosleep */
 		struct {
diff --git a/include/linux/time.h b/include/linux/time.h
index 242f62499bb..ea16c1a01d5 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -113,6 +113,21 @@ struct timespec current_kernel_time(void);
 #define CURRENT_TIME		(current_kernel_time())
 #define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
 
+/* Some architectures do not supply their own clocksource.
+ * This is mainly the case in architectures that get their
+ * inter-tick times by reading the counter on their interval
+ * timer. Since these timers wrap every tick, they're not really
+ * useful as clocksources. Wrapping them to act like one is possible
+ * but not very efficient. So we provide a callout these arches
+ * can implement for use with the jiffies clocksource to provide
+ * finer then tick granular time.
+ */
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+extern u32 arch_gettimeoffset(void);
+#else
+static inline u32 arch_gettimeoffset(void) { return 0; }
+#endif
+
 extern void do_gettimeofday(struct timeval *tv);
 extern int do_settimeofday(struct timespec *tv);
 extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz);
diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h
new file mode 100644
index 00000000000..c68bccba207
--- /dev/null
+++ b/include/linux/trace_seq.h
@@ -0,0 +1,92 @@
+#ifndef _LINUX_TRACE_SEQ_H
+#define _LINUX_TRACE_SEQ_H
+
+#include <linux/fs.h>
+
+/*
+ * Trace sequences are used to allow a function to call several other functions
+ * to create a string of data to use (up to a max of PAGE_SIZE.
+ */
+
+struct trace_seq {
+	unsigned char		buffer[PAGE_SIZE];
+	unsigned int		len;
+	unsigned int		readpos;
+};
+
+static inline void
+trace_seq_init(struct trace_seq *s)
+{
+	s->len = 0;
+	s->readpos = 0;
+}
+
+/*
+ * Currently only defined when tracing is enabled.
+ */
+#ifdef CONFIG_TRACING
+extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+extern int trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args)
+	__attribute__ ((format (printf, 2, 0)));
+extern int
+trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
+extern void trace_print_seq(struct seq_file *m, struct trace_seq *s);
+extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
+				 size_t cnt);
+extern int trace_seq_puts(struct trace_seq *s, const char *str);
+extern int trace_seq_putc(struct trace_seq *s, unsigned char c);
+extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len);
+extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
+				size_t len);
+extern void *trace_seq_reserve(struct trace_seq *s, size_t len);
+extern int trace_seq_path(struct trace_seq *s, struct path *path);
+
+#else /* CONFIG_TRACING */
+static inline int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
+{
+	return 0;
+}
+static inline int
+trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
+{
+	return 0;
+}
+
+static inline void trace_print_seq(struct seq_file *m, struct trace_seq *s)
+{
+}
+static inline ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
+				 size_t cnt)
+{
+	return 0;
+}
+static inline int trace_seq_puts(struct trace_seq *s, const char *str)
+{
+	return 0;
+}
+static inline int trace_seq_putc(struct trace_seq *s, unsigned char c)
+{
+	return 0;
+}
+static inline int
+trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len)
+{
+	return 0;
+}
+static inline int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
+				       size_t len)
+{
+	return 0;
+}
+static inline void *trace_seq_reserve(struct trace_seq *s, size_t len)
+{
+	return NULL;
+}
+static inline int trace_seq_path(struct trace_seq *s, struct path *path)
+{
+	return 0;
+}
+#endif /* CONFIG_TRACING */
+
+#endif /* _LINUX_TRACE_SEQ_H */
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index c7aa154f4bf..eb96603d92d 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -259,14 +259,12 @@ static inline void tracehook_finish_clone(struct task_struct *child,
 
 /**
  * tracehook_report_clone - in parent, new child is about to start running
- * @trace:		return value from tracehook_prepare_clone()
  * @regs:		parent's user register state
  * @clone_flags:	flags from parent's system call
  * @pid:		new child's PID in the parent's namespace
  * @child:		new child task
  *
- * Called after a child is set up, but before it has been started
- * running.  @trace is the value returned by tracehook_prepare_clone().
+ * Called after a child is set up, but before it has been started running.
  * This is not a good place to block, because the child has not started
  * yet.  Suspend the child here if desired, and then block in
  * tracehook_report_clone_complete().  This must prevent the child from
@@ -276,13 +274,14 @@ static inline void tracehook_finish_clone(struct task_struct *child,
  *
  * Called with no locks held, but the child cannot run until this returns.
  */
-static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
+static inline void tracehook_report_clone(struct pt_regs *regs,
 					  unsigned long clone_flags,
 					  pid_t pid, struct task_struct *child)
 {
-	if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) {
+	if (unlikely(task_ptrace(child))) {
 		/*
-		 * The child starts up with an immediate SIGSTOP.
+		 * It doesn't matter who attached/attaching to this
+		 * task, the pending SIGSTOP is right in any case.
 		 */
 		sigaddset(&child->pending.signal, SIGSTOP);
 		set_tsk_thread_flag(child, TIF_SIGPENDING);
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index d35a7ee7611..14df7e635d4 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -31,6 +31,8 @@ struct tracepoint {
 					 * Keep in sync with vmlinux.lds.h.
 					 */
 
+#ifndef DECLARE_TRACE
+
 #define TP_PROTO(args...)	args
 #define TP_ARGS(args...)		args
 
@@ -114,6 +116,7 @@ static inline void tracepoint_update_probe_range(struct tracepoint *begin,
 	struct tracepoint *end)
 { }
 #endif /* CONFIG_TRACEPOINTS */
+#endif /* DECLARE_TRACE */
 
 /*
  * Connect a probe to a tracepoint.
@@ -154,10 +157,8 @@ static inline void tracepoint_synchronize_unregister(void)
 }
 
 #define PARAMS(args...) args
-#define TRACE_FORMAT(name, proto, args, fmt)		\
-	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-
 
+#ifndef TRACE_EVENT
 /*
  * For use with the TRACE_EVENT macro:
  *
@@ -262,5 +263,6 @@ static inline void tracepoint_synchronize_unregister(void)
 
 #define TRACE_EVENT(name, proto, args, struct, assign, print)	\
 	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#endif
 
 #endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index fc39db95499..1488d8c81aa 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -185,7 +185,7 @@ struct tty_port;
 struct tty_port_operations {
 	/* Return 1 if the carrier is raised */
 	int (*carrier_raised)(struct tty_port *port);
-	void (*raise_dtr_rts)(struct tty_port *port);
+	void (*dtr_rts)(struct tty_port *port, int raise);
 };
 	
 struct tty_port {
@@ -201,6 +201,9 @@ struct tty_port {
 	unsigned char		*xmit_buf;	/* Optional buffer */
 	int			close_delay;	/* Close port delay */
 	int			closing_wait;	/* Delay for output */
+	int			drain_delay;	/* Set to zero if no pure time
+						   based drain is needed else
+						   set to size of fifo */
 };
 
 /*
@@ -223,8 +226,11 @@ struct tty_struct {
 	struct tty_driver *driver;
 	const struct tty_operations *ops;
 	int index;
-	/* The ldisc objects are protected by tty_ldisc_lock at the moment */
-	struct tty_ldisc ldisc;
+
+	/* Protects ldisc changes: Lock tty not pty */
+	struct mutex ldisc_mutex;
+	struct tty_ldisc *ldisc;
+
 	struct mutex termios_mutex;
 	spinlock_t ctrl_lock;
 	/* Termios values are protected by the termios mutex */
@@ -311,6 +317,7 @@ struct tty_struct {
 #define TTY_CLOSING 		7	/* ->close() in progress */
 #define TTY_LDISC 		9	/* Line discipline attached */
 #define TTY_LDISC_CHANGING 	10	/* Line discipline changing */
+#define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
 #define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
 #define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
 #define TTY_PTY_LOCK 		16	/* pty private */
@@ -403,6 +410,7 @@ extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
 extern void tty_ldisc_deref(struct tty_ldisc *);
 extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+extern void tty_ldisc_hangup(struct tty_struct *tty);
 extern const struct file_operations tty_ldiscs_proc_fops;
 
 extern void tty_wakeup(struct tty_struct *tty);
@@ -425,6 +433,9 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
 extern void tty_release_dev(struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);
 
+extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
+
 extern struct mutex tty_mutex;
 
 extern void tty_write_unlock(struct tty_struct *tty);
@@ -438,6 +449,7 @@ extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
 extern void tty_port_raise_dtr_rts(struct tty_port *port);
+extern void tty_port_lower_dtr_rts(struct tty_port *port);
 extern void tty_port_hangup(struct tty_port *port);
 extern int tty_port_block_til_ready(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index bcba84ea2d8..3566129384a 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -127,7 +127,8 @@
  * 	the line discipline are close to full, and it should somehow
  * 	signal that no more characters should be sent to the tty.
  *
- *	Optional: Always invoke via tty_throttle();
+ *	Optional: Always invoke via tty_throttle(), called under the
+ *	termios lock.
  * 
  * void (*unthrottle)(struct tty_struct * tty);
  *
@@ -135,7 +136,8 @@
  * 	that characters can now be sent to the tty without fear of
  * 	overrunning the input buffers of the line disciplines.
  * 
- *	Optional: Always invoke via tty_unthrottle();
+ *	Optional: Always invoke via tty_unthrottle(), called under the
+ *	termios lock.
  *
  * void (*stop)(struct tty_struct *tty);
  *
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
index 6b7703e75ce..71339dc531c 100644
--- a/include/linux/ultrasound.h
+++ b/include/linux/ultrasound.h
@@ -34,7 +34,7 @@
  *		_GUS_VOICEOFF	- Stops voice (no parameters)
  *		_GUS_VOICEFADE	- Stops the voice smoothly.
  *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
- *		_GUS_VOICEBALA	- Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
  *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
  *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
  *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 625e9e4639c..8cdfed738fe 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -224,8 +224,7 @@ struct usb_serial_driver {
 	/* Called by console with tty = NULL and by tty */
 	int  (*open)(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-	void (*close)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	void (*close)(struct usb_serial_port *port);
 	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 	/* Called only by the tty layer */
@@ -241,6 +240,10 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	/* Called by the tty layer for port level work. There may or may not
+	   be an attached tty at this point */
+	void (*dtr_rts)(struct usb_serial_port *port, int on);
+	int  (*carrier_raised)(struct usb_serial_port *port);
 	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
@@ -283,8 +286,7 @@ extern int usb_serial_generic_open(struct tty_struct *tty,
 		struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
 extern int usb_serial_generic_write_room(struct tty_struct *tty);
 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 06005fa9e98..4fca4f5440b 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -10,14 +10,17 @@
 
 /**
  * virtqueue - a queue to register buffers for sending or receiving.
+ * @list: the chain of virtqueues for this device
  * @callback: the function to call when buffers are consumed (can be NULL).
+ * @name: the name of this virtqueue (mainly for debugging)
  * @vdev: the virtio device this queue was created for.
  * @vq_ops: the operations for this virtqueue (see below).
  * @priv: a pointer for the virtqueue implementation to use.
  */
-struct virtqueue
-{
+struct virtqueue {
+	struct list_head list;
 	void (*callback)(struct virtqueue *vq);
+	const char *name;
 	struct virtio_device *vdev;
 	struct virtqueue_ops *vq_ops;
 	void *priv;
@@ -76,15 +79,16 @@ struct virtqueue_ops {
  * @dev: underlying device.
  * @id: the device type identification (used to match it with a driver).
  * @config: the configuration ops for this device.
+ * @vqs: the list of virtqueues for this device.
  * @features: the features supported by both driver and device.
  * @priv: private pointer for the driver's use.
  */
-struct virtio_device
-{
+struct virtio_device {
 	int index;
 	struct device dev;
 	struct virtio_device_id id;
 	struct virtio_config_ops *config;
+	struct list_head vqs;
 	/* Note that this is a Linux set_bit-style bitmap. */
 	unsigned long features[1];
 	void *priv;
@@ -99,8 +103,7 @@ void unregister_virtio_device(struct virtio_device *dev);
  * @id_table: the ids serviced by this driver.
  * @feature_table: an array of feature numbers supported by this device.
  * @feature_table_size: number of entries in the feature table array.
- * @probe: the function to call when a device is found.  Returns a token for
- *    remove, or PTR_ERR().
+ * @probe: the function to call when a device is found.  Returns 0 or -errno.
  * @remove: the function when a device is removed.
  * @config_changed: optional function to call when the device configuration
  *    changes; may be called in interrupt context.
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 94c56d29869..be7d255fc7c 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -15,6 +15,10 @@
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
 #define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
+#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
+#define VIRTIO_BLK_F_IDENTIFY	8	/* ATA IDENTIFY supported */
+
+#define VIRTIO_BLK_ID_BYTES	(sizeof(__u16[256]))	/* IDENTIFY DATA */
 
 struct virtio_blk_config
 {
@@ -32,6 +36,7 @@ struct virtio_blk_config
 	} geometry;
 	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
 	__u32 blk_size;
+	__u8 identify[VIRTIO_BLK_ID_BYTES];
 } __attribute__((packed));
 
 /* These two define direction. */
@@ -55,6 +60,13 @@ struct virtio_blk_outhdr
 	__u64 sector;
 };
 
+struct virtio_scsi_inhdr {
+	__u32 errors;
+	__u32 data_len;
+	__u32 sense_len;
+	__u32 residual;
+};
+
 /* And this is the final byte of the write scatter-gather list. */
 #define VIRTIO_BLK_S_OK		0
 #define VIRTIO_BLK_S_IOERR	1
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index bf8ec283b23..99f514575f6 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -29,6 +29,7 @@
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
 
 #ifdef __KERNEL__
+#include <linux/err.h>
 #include <linux/virtio.h>
 
 /**
@@ -49,15 +50,26 @@
  * @set_status: write the status byte
  *	vdev: the virtio_device
  *	status: the new status byte
+ * @request_vqs: request the specified number of virtqueues
+ *	vdev: the virtio_device
+ *	max_vqs: the max number of virtqueues we want
+ *      If supplied, must call before any virtqueues are instantiated.
+ *      To modify the max number of virtqueues after request_vqs has been
+ *      called, call free_vqs and then request_vqs with a new value.
+ * @free_vqs: cleanup resources allocated by request_vqs
+ *	vdev: the virtio_device
+ *      If supplied, must call after all virtqueues have been deleted.
  * @reset: reset the device
  *	vdev: the virtio device
  *	After this, status and feature negotiation must be done again
- * @find_vq: find a virtqueue and instantiate it.
+ * @find_vqs: find virtqueues and instantiate them.
  *	vdev: the virtio_device
- *	index: the 0-based virtqueue number in case there's more than one.
- *	callback: the virqtueue callback
- *	Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
- * @del_vq: free a virtqueue found by find_vq().
+ *	nvqs: the number of virtqueues to find
+ *	vqs: on success, includes new virtqueues
+ *	callbacks: array of callbacks, for each virtqueue
+ *	names: array of virtqueue names (mainly for debugging)
+ *	Returns 0 on success or error status
+ * @del_vqs: free virtqueues found by find_vqs().
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 32 feature bits (all we currently need).
@@ -66,6 +78,7 @@
  *	This gives the final feature bits for the device: it can change
  *	the dev->feature bits if it wants.
  */
+typedef void vq_callback_t(struct virtqueue *);
 struct virtio_config_ops
 {
 	void (*get)(struct virtio_device *vdev, unsigned offset,
@@ -75,10 +88,11 @@ struct virtio_config_ops
 	u8 (*get_status)(struct virtio_device *vdev);
 	void (*set_status)(struct virtio_device *vdev, u8 status);
 	void (*reset)(struct virtio_device *vdev);
-	struct virtqueue *(*find_vq)(struct virtio_device *vdev,
-				     unsigned index,
-				     void (*callback)(struct virtqueue *));
-	void (*del_vq)(struct virtqueue *vq);
+	int (*find_vqs)(struct virtio_device *, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[]);
+	void (*del_vqs)(struct virtio_device *);
 	u32 (*get_features)(struct virtio_device *vdev);
 	void (*finalize_features)(struct virtio_device *vdev);
 };
@@ -99,7 +113,9 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev,
 	if (__builtin_constant_p(fbit))
 		BUILD_BUG_ON(fbit >= 32);
 
-	virtio_check_driver_offered_feature(vdev, fbit);
+	if (fbit < VIRTIO_TRANSPORT_F_START)
+		virtio_check_driver_offered_feature(vdev, fbit);
+
 	return test_bit(fbit, vdev->features);
 }
 
@@ -126,5 +142,18 @@ static inline int virtio_config_buf(struct virtio_device *vdev,
 	vdev->config->get(vdev, offset, buf, len);
 	return 0;
 }
+
+static inline
+struct virtqueue *virtio_find_single_vq(struct virtio_device *vdev,
+					vq_callback_t *c, const char *n)
+{
+	vq_callback_t *callbacks[] = { c };
+	const char *names[] = { n };
+	struct virtqueue *vq;
+	int err = vdev->config->find_vqs(vdev, 1, &vq, callbacks, names);
+	if (err < 0)
+		return ERR_PTR(err);
+	return vq;
+}
 #endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
index cd0fd5d181a..9a3d7c48c62 100644
--- a/include/linux/virtio_pci.h
+++ b/include/linux/virtio_pci.h
@@ -47,9 +47,17 @@
 /* The bit of the ISR which indicates a device configuration change. */
 #define VIRTIO_PCI_ISR_CONFIG		0x2
 
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR        20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR         22
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
 /* The remaining space is defined by each driver as the per-driver
  * configuration space */
-#define VIRTIO_PCI_CONFIG		20
+#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
 
 /* Virtio ABI version, this must match exactly */
 #define VIRTIO_PCI_ABI_VERSION		0
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 71e03722fb5..693e0ec5afa 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -14,6 +14,8 @@
 #define VRING_DESC_F_NEXT	1
 /* This marks a buffer as write-only (otherwise read-only). */
 #define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
 
 /* The Host uses this in used->flags to advise the Guest: don't kick me when
  * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
@@ -24,6 +26,9 @@
  * optimization.  */
 #define VRING_AVAIL_F_NO_INTERRUPT	1
 
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
 struct vring_desc
 {
@@ -119,7 +124,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *vq),
-				      void (*callback)(struct virtqueue *vq));
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name);
 void vring_del_virtqueue(struct virtqueue *vq);
 /* Filter out transport-specific feature bits. */
 void vring_transport_features(struct virtio_device *vdev);
diff --git a/include/linux/wait.h b/include/linux/wait.h
index bc024632f36..6788e1a4d4c 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -132,8 +132,6 @@ static inline void __remove_wait_queue(wait_queue_head_t *head,
 	list_del(&old->task_list);
 }
 
-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
-			int nr_exclusive, int sync, void *key);
 void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
 void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key);
 void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr,
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 9c1ed1fb6dd..3224820c851 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -79,7 +79,6 @@ struct writeback_control {
 void writeback_inodes(struct writeback_control *wbc);
 int inode_wait(void *);
 void sync_inodes_sb(struct super_block *, int wait);
-void sync_inodes(int wait);
 
 /* writeback.h requires fs.h; it, too, is not included from here. */
 static inline void wait_on_inode(struct inode *inode)
@@ -168,8 +167,6 @@ void writeback_set_ratelimit(void);
 /* pdflush.c */
 extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
 				   read-only. */
-extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
-extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
 
 
 #endif		/* WRITEBACK_H */
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
index 0627a9ae634..3d138c1fcf8 100644
--- a/include/scsi/fc/fc_fip.h
+++ b/include/scsi/fc/fc_fip.h
@@ -22,13 +22,6 @@
  * http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
  */
 
-/*
- * The FIP ethertype eventually goes in net/if_ether.h.
- */
-#ifndef ETH_P_FIP
-#define ETH_P_FIP	0x8914	/* FIP Ethertype */
-#endif
-
 #define FIP_DEF_PRI	128	/* default selection priority */
 #define FIP_DEF_FC_MAP	0x0efc00 /* default FCoE MAP (MAC OUI) value */
 #define FIP_DEF_FKA	8000	/* default FCF keep-alive/advert period (mS) */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index d0ed5226f8c..4426f00da5f 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -22,6 +22,11 @@
 #define ISCSI_IF_H
 
 #include <scsi/iscsi_proto.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#define ISCSI_NL_GRP_ISCSID	1
+#define ISCSI_NL_GRP_UIP	2
 
 #define UEVENT_BASE			10
 #define KEVENT_BASE			100
@@ -50,7 +55,10 @@ enum iscsi_uevent_e {
 	ISCSI_UEVENT_TGT_DSCVR		= UEVENT_BASE + 15,
 	ISCSI_UEVENT_SET_HOST_PARAM	= UEVENT_BASE + 16,
 	ISCSI_UEVENT_UNBIND_SESSION	= UEVENT_BASE + 17,
-	ISCSI_UEVENT_CREATE_BOUND_SESSION	= UEVENT_BASE + 18,
+	ISCSI_UEVENT_CREATE_BOUND_SESSION		= UEVENT_BASE + 18,
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST	= UEVENT_BASE + 19,
+
+	ISCSI_UEVENT_PATH_UPDATE	= UEVENT_BASE + 20,
 
 	/* up events */
 	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
@@ -59,6 +67,9 @@ enum iscsi_uevent_e {
 	ISCSI_KEVENT_DESTROY_SESSION	= KEVENT_BASE + 4,
 	ISCSI_KEVENT_UNBIND_SESSION	= KEVENT_BASE + 5,
 	ISCSI_KEVENT_CREATE_SESSION	= KEVENT_BASE + 6,
+
+	ISCSI_KEVENT_PATH_REQ		= KEVENT_BASE + 7,
+	ISCSI_KEVENT_IF_DOWN		= KEVENT_BASE + 8,
 };
 
 enum iscsi_tgt_dscvr {
@@ -131,6 +142,10 @@ struct iscsi_uevent {
 		struct msg_transport_connect {
 			uint32_t	non_blocking;
 		} ep_connect;
+		struct msg_transport_connect_through_host {
+			uint32_t	host_no;
+			uint32_t	non_blocking;
+		} ep_connect_through_host;
 		struct msg_transport_poll {
 			uint64_t	ep_handle;
 			uint32_t	timeout_ms;
@@ -154,6 +169,9 @@ struct iscsi_uevent {
 			uint32_t	param; /* enum iscsi_host_param */
 			uint32_t	len;
 		} set_host_param;
+		struct msg_set_path {
+			uint32_t	host_no;
+		} set_path;
 	} u;
 	union {
 		/* messages k -> u */
@@ -187,10 +205,39 @@ struct iscsi_uevent {
 		struct msg_transport_connect_ret {
 			uint64_t	handle;
 		} ep_connect_ret;
+		struct msg_req_path {
+			uint32_t	host_no;
+		} req_path;
+		struct msg_notify_if_down {
+			uint32_t	host_no;
+		} notify_if_down;
 	} r;
 } __attribute__ ((aligned (sizeof(uint64_t))));
 
 /*
+ * To keep the struct iscsi_uevent size the same for userspace code
+ * compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
+ * ISCSI_KEVENT_PATH_REQ is defined separately and comes after the
+ * struct iscsi_uevent in the NETLINK_ISCSI message.
+ */
+struct iscsi_path {
+	uint64_t	handle;
+	uint8_t		mac_addr[6];
+	uint8_t		mac_addr_old[6];
+	uint32_t	ip_addr_len;	/* 4 or 16 */
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} src;
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} dst;
+	uint16_t	vlan_id;
+	uint16_t	pmtu;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+/*
  * Common error codes
  */
 enum iscsi_err {
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 45f9cc642c4..ebdd9f4cf07 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -679,6 +679,7 @@ struct fc_lport {
 	unsigned int		e_d_tov;
 	unsigned int		r_a_tov;
 	u8			max_retry_count;
+	u8			max_rport_retry_count;
 	u16			link_speed;
 	u16			link_supported_speeds;
 	u16			lro_xid;	/* max xid for fcoe lro */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 0289f5745fb..196525cd402 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -82,9 +82,12 @@ enum {
 
 
 enum {
+	ISCSI_TASK_FREE,
 	ISCSI_TASK_COMPLETED,
 	ISCSI_TASK_PENDING,
 	ISCSI_TASK_RUNNING,
+	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
+	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
 };
 
 struct iscsi_r2t_info {
@@ -181,9 +184,7 @@ struct iscsi_conn {
 
 	/* xmit */
 	struct list_head	mgmtqueue;	/* mgmt (control) xmit queue */
-	struct list_head	mgmt_run_list;	/* list of control tasks */
-	struct list_head	xmitqueue;	/* data-path cmd queue */
-	struct list_head	run_list;	/* list of cmds in progress */
+	struct list_head	cmdqueue;	/* data-path cmd queue */
 	struct list_head	requeue;	/* tasks needing another run */
 	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
 	unsigned long		suspend_tx;	/* suspend Tx */
@@ -406,6 +407,7 @@ extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
 				char *, int);
 extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
 extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
 extern void iscsi_requeue_task(struct iscsi_task *task);
 extern void iscsi_put_task(struct iscsi_task *task);
 extern void __iscsi_get_task(struct iscsi_task *task);
diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h
index f888a6fda07..56e920ade32 100644
--- a/include/scsi/osd_attributes.h
+++ b/include/scsi/osd_attributes.h
@@ -29,6 +29,7 @@ enum {
 	OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1,
 	OSD_APAGE_PARTITION_QUOTAS	= OSD_APAGE_PARTITION_FIRST + 2,
 	OSD_APAGE_PARTITION_TIMESTAMP	= OSD_APAGE_PARTITION_FIRST + 3,
+	OSD_APAGE_PARTITION_ATTR_ACCESS = OSD_APAGE_PARTITION_FIRST + 4,
 	OSD_APAGE_PARTITION_SECURITY	= OSD_APAGE_PARTITION_FIRST + 5,
 	OSD_APAGE_PARTITION_LAST	= 0x5FFFFFFF,
 
@@ -51,7 +52,9 @@ enum {
 	OSD_APAGE_RESERVED_TYPE_LAST	= 0xEFFFFFFF,
 
 	OSD_APAGE_COMMON_FIRST		= 0xF0000000,
-	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFE,
+	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFD,
+
+	OSD_APAGE_CURRENT_COMMAND	= 0xFFFFFFFE,
 
 	OSD_APAGE_REQUEST_ALL		= 0xFFFFFFFF,
 };
@@ -106,10 +109,30 @@ enum {
 	OSD_ATTR_RI_PRODUCT_REVISION_LEVEL   = 0x7,   /* 4        */
 	OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER    = 0x8,   /* variable */
 	OSD_ATTR_RI_OSD_NAME                 = 0x9,   /* variable */
+	OSD_ATTR_RI_MAX_CDB_CONTINUATION_LEN = 0xA,   /* 4        */
 	OSD_ATTR_RI_TOTAL_CAPACITY           = 0x80,  /* 8        */
 	OSD_ATTR_RI_USED_CAPACITY            = 0x81,  /* 8        */
 	OSD_ATTR_RI_NUMBER_OF_PARTITIONS     = 0xC0,  /* 8        */
 	OSD_ATTR_RI_CLOCK                    = 0x100, /* 6        */
+	OARI_DEFAULT_ISOLATION_METHOD        = 0X110, /* 1        */
+	OARI_SUPPORTED_ISOLATION_METHODS     = 0X111, /* 32       */
+
+	OARI_DATA_ATOMICITY_GUARANTEE                   = 0X120,   /* 8       */
+	OARI_DATA_ATOMICITY_ALIGNMENT                   = 0X121,   /* 8       */
+	OARI_ATTRIBUTES_ATOMICITY_GUARANTEE             = 0X122,   /* 8       */
+	OARI_DATA_ATTRIBUTES_ATOMICITY_MULTIPLIER       = 0X123,   /* 1       */
+
+	OARI_MAXIMUM_SNAPSHOTS_COUNT                    = 0X1C1,    /* 0 or 4 */
+	OARI_MAXIMUM_CLONES_COUNT                       = 0X1C2,    /* 0 or 4 */
+	OARI_MAXIMUM_BRANCH_DEPTH                       = 0X1CC,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_FIRST  = 0X200,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_LAST   = 0X2ff,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_FIRST = 0X300,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_LAST  = 0X30F,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_DUPLICATED_OBJECT_FREEZING     = 0X310,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_SNAPSHOT_REFRESHING            = 0X311,    /* 0 or 1 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_FIRST = 0X7000001,/* 0 or 4 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_LAST  = 0X700FFFF,/* 0 or 4 */
 };
 /* Root_Information_attributes_page does not have a get_page structure */
 
@@ -120,7 +143,15 @@ enum {
 	OSD_ATTR_PI_PARTITION_ID            = 0x1,     /* 8        */
 	OSD_ATTR_PI_USERNAME                = 0x9,     /* variable */
 	OSD_ATTR_PI_USED_CAPACITY           = 0x81,    /* 8        */
+	OSD_ATTR_PI_USED_CAPACITY_INCREMENT = 0x84,    /* 0 or 8   */
 	OSD_ATTR_PI_NUMBER_OF_OBJECTS       = 0xC1,    /* 8        */
+
+	OSD_ATTR_PI_ACTUAL_DATA_SPACE                      = 0xD1, /* 0 or 8 */
+	OSD_ATTR_PI_RESERVED_DATA_SPACE                    = 0xD2, /* 0 or 8 */
+	OSD_ATTR_PI_DEFAULT_SNAPSHOT_DUPLICATION_METHOD    = 0x200,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_DUPLICATION_METHOD       = 0x201,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_SP_TIME_OF_DUPLICATION         = 0x300,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_TIME_OF_DUPLICATION      = 0x301,/* 0 or 4 */
 };
 /* Partition Information attributes page does not have a get_page structure */
 
@@ -131,6 +162,7 @@ enum {
 	OSD_ATTR_CI_PARTITION_ID           = 0x1,       /* 8        */
 	OSD_ATTR_CI_COLLECTION_OBJECT_ID   = 0x2,       /* 8        */
 	OSD_ATTR_CI_USERNAME               = 0x9,       /* variable */
+	OSD_ATTR_CI_COLLECTION_TYPE        = 0xA,       /* 1        */
 	OSD_ATTR_CI_USED_CAPACITY          = 0x81,      /* 8        */
 };
 /* Collection Information attributes page does not have a get_page structure */
@@ -144,6 +176,8 @@ enum {
 	OSD_ATTR_OI_USERNAME             = 0x9,       /* variable */
 	OSD_ATTR_OI_USED_CAPACITY        = 0x81,      /* 8        */
 	OSD_ATTR_OI_LOGICAL_LENGTH       = 0x82,      /* 8        */
+	SD_ATTR_OI_ACTUAL_DATA_SPACE     = 0XD1,      /* 0 OR 8   */
+	SD_ATTR_OI_RESERVED_DATA_SPACE   = 0XD2,      /* 0 OR 8   */
 };
 /* Object Information attributes page does not have a get_page structure */
 
@@ -248,7 +282,18 @@ struct object_timestamps_attributes_page {
 	struct osd_timestamp data_modified_time;
 }  __packed;
 
-/* 7.1.2.19 Collections attributes page */
+/* OSD2r05: 7.1.3.19 Attributes Access attributes page
+ * (OSD_APAGE_PARTITION_ATTR_ACCESS)
+ *
+ * each attribute is of the form below. Total array length is deduced
+ * from the attribute's length
+ * (See allowed_attributes_access of the struct osd_cap_object_descriptor)
+ */
+struct attributes_access_attr {
+	struct osd_attributes_list_attrid attr_list[0];
+} __packed;
+
+/* OSD2r05: 7.1.2.21 Collections attributes page */
 /* TBD */
 
 /* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */
@@ -324,4 +369,29 @@ struct object_security_attributes_page {
 	__be32 policy_access_tag;
 }  __packed;
 
+/* OSD2r05: 7.1.3.31 Current Command attributes page
+ * (OSD_APAGE_CURRENT_COMMAND)
+ */
+enum {
+	OSD_ATTR_CC_RESPONSE_INTEGRITY_CHECK_VALUE     = 0x1, /* 32  */
+	OSD_ATTR_CC_OBJECT_TYPE                        = 0x2, /* 1   */
+	OSD_ATTR_CC_PARTITION_ID                       = 0x3, /* 8   */
+	OSD_ATTR_CC_OBJECT_ID                          = 0x4, /* 8   */
+	OSD_ATTR_CC_STARTING_BYTE_ADDRESS_OF_APPEND    = 0x5, /* 8   */
+	OSD_ATTR_CC_CHANGE_IN_USED_CAPACITY            = 0x6, /* 8   */
+};
+
+/*TBD: osdv1_current_command_attributes_page */
+
+struct osdv2_current_command_attributes_page {
+	struct osd_attr_page_header hdr;  /* id=0xFFFFFFFE, size=0x44 */
+	u8 response_integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+	u8 object_type;
+	u8 reserved[3];
+	__be64 partition_id;
+	__be64 object_id;
+	__be64 starting_byte_address_of_append;
+	__be64 change_in_used_capacity;
+};
+
 #endif /*ndef __OSD_ATTRIBUTES_H__*/
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index b24d9616eb4..02bd9f71635 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -18,6 +18,7 @@
 #include "osd_types.h"
 
 #include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
 
 /* Note: "NI" in comments below means "Not Implemented yet" */
 
@@ -47,6 +48,7 @@ enum osd_std_version {
  */
 struct osd_dev {
 	struct scsi_device *scsi_device;
+	struct file *file;
 	unsigned def_timeout;
 
 #ifdef OSD_VER1_SUPPORT
@@ -69,6 +71,10 @@ void osd_dev_fini(struct osd_dev *od);
 
 /* some hi level device operations */
 int osd_auto_detect_ver(struct osd_dev *od, void *caps);    /* GFP_KERNEL */
+static inline struct request_queue *osd_request_queue(struct osd_dev *od)
+{
+	return od->scsi_device->request_queue;
+}
 
 /* we might want to use function vector in the future */
 static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v)
@@ -363,7 +369,9 @@ void osd_req_create_object(struct osd_request *or, struct osd_obj_id *);
 void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *);
 
 void osd_req_write(struct osd_request *or,
-	const struct osd_obj_id *, struct bio *data_out, u64 offset);
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
 void osd_req_append(struct osd_request *or,
 	const struct osd_obj_id *, struct bio *data_out);/* NI */
 void osd_req_create_write(struct osd_request *or,
@@ -378,7 +386,9 @@ void osd_req_flush_object(struct osd_request *or,
 	/*V2*/ u64 offset, /*V2*/ u64 len);
 
 void osd_req_read(struct osd_request *or,
-	const struct osd_obj_id *, struct bio *data_in, u64 offset);
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
 
 /*
  * Root/Partition/Collection/Object Attributes commands
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index 62b2ab8c69d..2cc8e8b1cc1 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -303,7 +303,15 @@ enum osd_service_actions {
 	OSD_ACT_V2(REMOVE_MEMBER_OBJECTS,	0x21)
 	OSD_ACT_V2(GET_MEMBER_ATTRIBUTES,	0x22)
 	OSD_ACT_V2(SET_MEMBER_ATTRIBUTES,	0x23)
+
+	OSD_ACT_V2(CREATE_CLONE,		0x28)
+	OSD_ACT_V2(CREATE_SNAPSHOT,		0x29)
+	OSD_ACT_V2(DETACH_CLONE,		0x2A)
+	OSD_ACT_V2(REFRESH_SNAPSHOT_CLONE,	0x2B)
+	OSD_ACT_V2(RESTORE_PARTITION_FROM_SNAPSHOT, 0x2C)
+
 	OSD_ACT_V2(READ_MAP,			0x31)
+	OSD_ACT_V2(READ_MAPS_COMPARE,		0x32)
 
 	OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND,	0x8F7E, 0x8F7C)
 	OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT,	0x8F7F, 0x8F7D)
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 43b50d36925..3878d1dc7f5 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -270,7 +270,7 @@ static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
 
 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
 {
-	return scmd->request->sector;
+	return blk_rq_pos(scmd->request);
 }
 
 static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index c9184f756ca..68a8d873bbd 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -680,7 +680,7 @@ fc_remote_port_chkready(struct fc_rport *rport)
 		if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
 			result = 0;
 		else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
-			result = DID_TRANSPORT_DISRUPTED << 16;
+			result = DID_IMM_RETRY << 16;
 		else
 			result = DID_NO_CONNECT << 16;
 		break;
@@ -688,7 +688,7 @@ fc_remote_port_chkready(struct fc_rport *rport)
 		if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)
 			result = DID_TRANSPORT_FAILFAST << 16;
 		else
-			result = DID_TRANSPORT_DISRUPTED << 16;
+			result = DID_IMM_RETRY << 16;
 		break;
 	default:
 		result = DID_NO_CONNECT << 16;
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 457588e1119..349c7f30720 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -126,12 +126,14 @@ struct iscsi_transport {
 			       int *index, int *age);
 
 	void (*session_recovery_timedout) (struct iscsi_cls_session *session);
-	struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr,
+	struct iscsi_endpoint *(*ep_connect) (struct Scsi_Host *shost,
+					      struct sockaddr *dst_addr,
 					      int non_blocking);
 	int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
 	void (*ep_disconnect) (struct iscsi_endpoint *ep);
 	int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
 			  uint32_t enable, struct sockaddr *dst_addr);
+	int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
 };
 
 /*
@@ -148,6 +150,10 @@ extern void iscsi_conn_error_event(struct iscsi_cls_conn *conn,
 extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 			  char *data, uint32_t data_size);
 
+extern int iscsi_offload_mesg(struct Scsi_Host *shost,
+			      struct iscsi_transport *transport, uint32_t type,
+			      char *data, uint16_t data_size);
+
 struct iscsi_cls_conn {
 	struct list_head conn_list;	/* item in connlist */
 	void *dd_data;			/* LLD private data */
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 6add80fc251..82aed3f4753 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -255,6 +255,7 @@ typedef int __bitwise snd_pcm_subformat_t;
 #define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
 #define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
 #define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+#define SNDRV_PCM_INFO_FIFO_IN_FRAMES	0x80000000	/* internal kernel flag - FIFO size is in frames */
 
 typedef int __bitwise snd_pcm_state_t;
 #define	SNDRV_PCM_STATE_OPEN		((__force snd_pcm_state_t) 0) /* stream is open */
diff --git a/include/sound/core.h b/include/sound/core.h
index 3dea79829ac..309cb9659a0 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -300,19 +300,10 @@ int snd_card_create(int idx, const char *id,
 		    struct module *module, int extra_size,
 		    struct snd_card **card_ret);
 
-static inline __deprecated
-struct snd_card *snd_card_new(int idx, const char *id,
-			      struct module *module, int extra_size)
-{
-	struct snd_card *card;
-	if (snd_card_create(idx, id, module, extra_size, &card) < 0)
-		return NULL;
-	return card;
-}
-
 int snd_card_disconnect(struct snd_card *card);
 int snd_card_free(struct snd_card *card);
 int snd_card_free_when_closed(struct snd_card *card);
+void snd_card_set_id(struct snd_card *card, const char *id);
 int snd_card_register(struct snd_card *card);
 int snd_card_info_init(void);
 int snd_card_info_done(void);
diff --git a/include/sound/driver.h b/include/sound/driver.h
deleted file mode 100644
index f0359437d01..00000000000
--- a/include/sound/driver.h
+++ /dev/null
@@ -1 +0,0 @@
-#warning "This file is deprecated"
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index c1729689161..23893523dc8 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -98,6 +98,7 @@ struct snd_pcm_ops {
 #define SNDRV_PCM_IOCTL1_INFO		1
 #define SNDRV_PCM_IOCTL1_CHANNEL_INFO	2
 #define SNDRV_PCM_IOCTL1_GSTATE		3
+#define SNDRV_PCM_IOCTL1_FIFO_SIZE	4
 
 #define SNDRV_PCM_TRIGGER_STOP		0
 #define SNDRV_PCM_TRIGGER_START		1
@@ -270,6 +271,7 @@ struct snd_pcm_runtime {
 	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
 	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
 	unsigned long hw_ptr_jiffies;	/* Time when hw_ptr is updated */
+	snd_pcm_sframes_t delay;	/* extra delay; typically FIFO size */
 
 	/* -- HW params -- */
 	snd_pcm_access_t access;	/* access mode */
@@ -486,80 +488,6 @@ void snd_pcm_detach_substream(struct snd_pcm_substream *substream);
 void snd_pcm_vma_notify_data(void *client, void *data);
 int snd_pcm_mmap_data(struct snd_pcm_substream *substream, struct file *file, struct vm_area_struct *area);
 
-#if BITS_PER_LONG >= 64
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	*rem = *n % div;
-	*n /= div;
-}
-
-#elif defined(i386)
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	u_int32_t low, high;
-	low = *n & 0xffffffff;
-	high = *n >> 32;
-	if (high) {
-		u_int32_t high1 = high % div;
-		high /= div;
-		asm("divl %2":"=a" (low), "=d" (*rem):"rm" (div), "a" (low), "d" (high1));
-		*n = (u_int64_t)high << 32 | low;
-	} else {
-		*n = low / div;
-		*rem = low % div;
-	}
-}
-#else
-
-static inline void divl(u_int32_t high, u_int32_t low,
-			u_int32_t div,
-			u_int32_t *q, u_int32_t *r)
-{
-	u_int64_t n = (u_int64_t)high << 32 | low;
-	u_int64_t d = (u_int64_t)div << 31;
-	u_int32_t q1 = 0;
-	int c = 32;
-	while (n > 0xffffffffU) {
-		q1 <<= 1;
-		if (n >= d) {
-			n -= d;
-			q1 |= 1;
-		}
-		d >>= 1;
-		c--;
-	}
-	q1 <<= c;
-	if (n) {
-		low = n;
-		*q = q1 | (low / div);
-		*r = low % div;
-	} else {
-		*r = 0;
-		*q = q1;
-	}
-	return;
-}
-
-static inline void div64_32(u_int64_t *n, u_int32_t div, u_int32_t *rem)
-{
-	u_int32_t low, high;
-	low = *n & 0xffffffff;
-	high = *n >> 32;
-	if (high) {
-		u_int32_t high1 = high % div;
-		u_int32_t low1 = low;
-		high /= div;
-		divl(high1, low1, div, &low, rem);
-		*n = (u_int64_t)high << 32 | low;
-	} else {
-		*n = low / div;
-		*rem = low % div;
-	}
-}
-#endif
-
 /*
  *  PCM library
  */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 13676472ddf..352d7eee9b6 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -45,24 +45,6 @@ struct snd_pcm_substream;
 #define SND_SOC_DAIFMT_GATED		(1 << 4) /* clock is gated */
 
 /*
- * DAI Left/Right Clocks.
- *
- * Specifies whether the DAI can support different samples for similtanious
- * playback and capture. This usually requires a seperate physical frame
- * clock for playback and capture.
- */
-#define SND_SOC_DAIFMT_SYNC		(0 << 5) /* Tx FRM = Rx FRM */
-#define SND_SOC_DAIFMT_ASYNC		(1 << 5) /* Tx FRM ~ Rx FRM */
-
-/*
- * TDM
- *
- * Time Division Multiplexing. Allows PCM data to be multplexed with other
- * data on the DAI.
- */
-#define SND_SOC_DAIFMT_TDM		(1 << 6)
-
-/*
  * DAI hardware signal inversions.
  *
  * Specifies whether the DAI can also support inverted clocks for the specified
@@ -96,6 +78,10 @@ struct snd_pcm_substream;
 #define SND_SOC_CLOCK_IN		0
 #define SND_SOC_CLOCK_OUT		1
 
+#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16_LE |\
+                               SNDRV_PCM_FMTBIT_S32_LE |\
+                               SNDRV_PCM_FMTBIT_S32_BE)
+
 struct snd_soc_dai_ops;
 struct snd_soc_dai;
 struct snd_ac97_bus_ops;
@@ -208,6 +194,7 @@ struct snd_soc_dai {
 	/* DAI capabilities */
 	struct snd_soc_pcm_stream capture;
 	struct snd_soc_pcm_stream playback;
+	unsigned int symmetric_rates:1;
 
 	/* DAI runtime info */
 	struct snd_pcm_runtime *runtime;
@@ -219,11 +206,8 @@ struct snd_soc_dai {
 	/* DAI private data */
 	void *private_data;
 
-	/* parent codec/platform */
-	union {
-		struct snd_soc_codec *codec;
-		struct snd_soc_platform *platform;
-	};
+	/* parent platform */
+	struct snd_soc_platform *platform;
 
 	struct list_head list;
 };
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index a7def6a9a03..ec8a45f9a06 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -140,16 +140,30 @@
 #define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
 	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \
 {	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
 	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
 
-/* generic register modifier widget */
+/* generic widgets */
 #define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \
 {	.id = wid, .name = wname, .kcontrols = NULL, .num_kcontrols = 0, \
 	.reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \
 	.on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
+#define SND_SOC_DAPM_SUPPLY(wname, wreg, wshift, winvert, wevent, wflags) \
+{	.id = snd_soc_dapm_supply, .name = wname, .reg = wreg,	\
+	.shift = wshift, .invert = winvert, .event = wevent, \
+	.event_flags = wflags}
 
 /* dapm kcontrol types */
 #define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \
@@ -265,8 +279,6 @@ int snd_soc_dapm_add_routes(struct snd_soc_codec *codec,
 /* dapm events */
 int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream,
 	int event);
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
-	enum snd_soc_bias_level level);
 
 /* dapm sys fs - used by the core */
 int snd_soc_dapm_sys_add(struct device *dev);
@@ -298,6 +310,7 @@ enum snd_soc_dapm_type {
 	snd_soc_dapm_vmid,			/* codec bias/vmid - to minimise pops */
 	snd_soc_dapm_pre,			/* machine specific pre widget - exec first */
 	snd_soc_dapm_post,			/* machine specific post widget - exec last */
+	snd_soc_dapm_supply,		/* power/clock supply */
 };
 
 /*
@@ -357,6 +370,8 @@ struct snd_soc_dapm_widget {
 	unsigned char suspend:1;		/* was active before suspend */
 	unsigned char pmdown:1;			/* waiting for timeout */
 
+	int (*power_check)(struct snd_soc_dapm_widget *w);
+
 	/* external events */
 	unsigned short event_flags;		/* flags to specify event types */
 	int (*event)(struct snd_soc_dapm_widget*, struct snd_kcontrol *, int);
@@ -368,6 +383,9 @@ struct snd_soc_dapm_widget {
 	/* widget input and outputs */
 	struct list_head sources;
 	struct list_head sinks;
+
+	/* used during DAPM updates */
+	struct list_head power_list;
 };
 
 #endif
diff --git a/include/sound/soc.h b/include/sound/soc.h
index a40bc6f316f..cf6111d72b1 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -118,6 +118,14 @@
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+	 xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg, .shift = shift_left, .rshift = shift_right, \
+		 .max = xmax, .invert = xinvert} }
 #define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -206,10 +214,6 @@ void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
 #endif
 
-/* codec IO */
-#define snd_soc_read(codec, reg) codec->read(codec, reg)
-#define snd_soc_write(codec, reg, value) codec->write(codec, reg, value)
-
 /* codec register bit access */
 int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
 				unsigned short mask, unsigned short value);
@@ -331,6 +335,7 @@ struct snd_soc_codec {
 	struct module *owner;
 	struct mutex mutex;
 	struct device *dev;
+	struct snd_soc_device *socdev;
 
 	struct list_head list;
 
@@ -364,6 +369,8 @@ struct snd_soc_codec {
 	enum snd_soc_bias_level bias_level;
 	enum snd_soc_bias_level suspend_bias_level;
 	struct delayed_work delayed_work;
+	struct list_head up_list;
+	struct list_head down_list;
 
 	/* codec DAI's */
 	struct snd_soc_dai *dai;
@@ -417,6 +424,12 @@ struct snd_soc_dai_link  {
 	/* codec/machine specific init - e.g. add machine controls */
 	int (*init)(struct snd_soc_codec *codec);
 
+	/* Symmetry requirements */
+	unsigned int symmetric_rates:1;
+
+	/* Symmetry data - only valid if symmetry is being enforced */
+	unsigned int rate;
+
 	/* DAI pcm */
 	struct snd_pcm *pcm;
 };
@@ -490,6 +503,19 @@ struct soc_enum {
 	void *dapm;
 };
 
+/* codec IO */
+static inline unsigned int snd_soc_read(struct snd_soc_codec *codec,
+					unsigned int reg)
+{
+	return codec->read(codec, reg);
+}
+
+static inline unsigned int snd_soc_write(struct snd_soc_codec *codec,
+					 unsigned int reg, unsigned int val)
+{
+	return codec->write(codec, reg, val);
+}
+
 #include <sound/soc-dai.h>
 
 #endif
diff --git a/include/sound/wm9081.h b/include/sound/wm9081.h
new file mode 100644
index 00000000000..e173ddbf6bd
--- /dev/null
+++ b/include/sound/wm9081.h
@@ -0,0 +1,25 @@
+/*
+ * linux/sound/wm9081.h -- Platform data for WM9081
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM_9081_H
+#define __LINUX_SND_WM_9081_H
+
+struct wm9081_retune_mobile_setting {
+	const char *name;
+	unsigned int rate;
+	u16 config[20];
+};
+
+struct wm9081_retune_mobile_config {
+	struct wm9081_retune_mobile_setting *configs;
+	int num_configs;
+};
+
+#endif
diff --git a/include/trace/block.h b/include/trace/block.h
deleted file mode 100644
index 25b7068b819..00000000000
--- a/include/trace/block.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _TRACE_BLOCK_H
-#define _TRACE_BLOCK_H
-
-#include <linux/blkdev.h>
-#include <linux/tracepoint.h>
-
-DECLARE_TRACE(block_rq_abort,
-	TP_PROTO(struct request_queue *q, struct request *rq),
-	      TP_ARGS(q, rq));
-
-DECLARE_TRACE(block_rq_insert,
-	TP_PROTO(struct request_queue *q, struct request *rq),
-	      TP_ARGS(q, rq));
-
-DECLARE_TRACE(block_rq_issue,
-	TP_PROTO(struct request_queue *q, struct request *rq),
-	      TP_ARGS(q, rq));
-
-DECLARE_TRACE(block_rq_requeue,
-	TP_PROTO(struct request_queue *q, struct request *rq),
-	      TP_ARGS(q, rq));
-
-DECLARE_TRACE(block_rq_complete,
-	TP_PROTO(struct request_queue *q, struct request *rq),
-	      TP_ARGS(q, rq));
-
-DECLARE_TRACE(block_bio_bounce,
-	TP_PROTO(struct request_queue *q, struct bio *bio),
-	      TP_ARGS(q, bio));
-
-DECLARE_TRACE(block_bio_complete,
-	TP_PROTO(struct request_queue *q, struct bio *bio),
-	      TP_ARGS(q, bio));
-
-DECLARE_TRACE(block_bio_backmerge,
-	TP_PROTO(struct request_queue *q, struct bio *bio),
-	      TP_ARGS(q, bio));
-
-DECLARE_TRACE(block_bio_frontmerge,
-	TP_PROTO(struct request_queue *q, struct bio *bio),
-	      TP_ARGS(q, bio));
-
-DECLARE_TRACE(block_bio_queue,
-	TP_PROTO(struct request_queue *q, struct bio *bio),
-	      TP_ARGS(q, bio));
-
-DECLARE_TRACE(block_getrq,
-	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
-	      TP_ARGS(q, bio, rw));
-
-DECLARE_TRACE(block_sleeprq,
-	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
-	      TP_ARGS(q, bio, rw));
-
-DECLARE_TRACE(block_plug,
-	TP_PROTO(struct request_queue *q),
-	      TP_ARGS(q));
-
-DECLARE_TRACE(block_unplug_timer,
-	TP_PROTO(struct request_queue *q),
-	      TP_ARGS(q));
-
-DECLARE_TRACE(block_unplug_io,
-	TP_PROTO(struct request_queue *q),
-	      TP_ARGS(q));
-
-DECLARE_TRACE(block_split,
-	TP_PROTO(struct request_queue *q, struct bio *bio, unsigned int pdu),
-	      TP_ARGS(q, bio, pdu));
-
-DECLARE_TRACE(block_remap,
-	TP_PROTO(struct request_queue *q, struct bio *bio, dev_t dev,
-		 sector_t from, sector_t to),
-	      TP_ARGS(q, bio, dev, from, to));
-
-#endif
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
new file mode 100644
index 00000000000..f7a7ae1e8f9
--- /dev/null
+++ b/include/trace/define_trace.h
@@ -0,0 +1,75 @@
+/*
+ * Trace files that want to automate creationg of all tracepoints defined
+ * in their file should include this file. The following are macros that the
+ * trace file may define:
+ *
+ * TRACE_SYSTEM defines the system the tracepoint is for
+ *
+ * TRACE_INCLUDE_FILE if the file name is something other than TRACE_SYSTEM.h
+ *     This macro may be defined to tell define_trace.h what file to include.
+ *     Note, leave off the ".h".
+ *
+ * TRACE_INCLUDE_PATH if the path is something other than core kernel include/trace
+ *     then this macro can define the path to use. Note, the path is relative to
+ *     define_trace.h, not the file including it. Full path names for out of tree
+ *     modules must be used.
+ */
+
+#ifdef CREATE_TRACE_POINTS
+
+/* Prevent recursion */
+#undef CREATE_TRACE_POINTS
+
+#include <linux/stringify.h>
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
+	DEFINE_TRACE(name)
+
+#undef DECLARE_TRACE
+#define DECLARE_TRACE(name, proto, args)	\
+	DEFINE_TRACE(name)
+
+#undef TRACE_INCLUDE
+#undef __TRACE_INCLUDE
+
+#ifndef TRACE_INCLUDE_FILE
+# define TRACE_INCLUDE_FILE TRACE_SYSTEM
+# define UNDEF_TRACE_INCLUDE_FILE
+#endif
+
+#ifndef TRACE_INCLUDE_PATH
+# define __TRACE_INCLUDE(system) <trace/events/system.h>
+# define UNDEF_TRACE_INCLUDE_PATH
+#else
+# define __TRACE_INCLUDE(system) __stringify(TRACE_INCLUDE_PATH/system.h)
+#endif
+
+# define TRACE_INCLUDE(system) __TRACE_INCLUDE(system)
+
+/* Let the trace headers be reread */
+#define TRACE_HEADER_MULTI_READ
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#ifdef CONFIG_EVENT_TRACING
+#include <trace/ftrace.h>
+#endif
+
+#undef TRACE_HEADER_MULTI_READ
+
+/* Only undef what we defined in this file */
+#ifdef UNDEF_TRACE_INCLUDE_FILE
+# undef TRACE_INCLUDE_FILE
+# undef UNDEF_TRACE_INCLUDE_FILE
+#endif
+
+#ifdef UNDEF_TRACE_INCLUDE_PATH
+# undef TRACE_INCLUDE_PATH
+# undef UNDEF_TRACE_INCLUDE_PATH
+#endif
+
+/* We may be processing more files */
+#define CREATE_TRACE_POINTS
+
+#endif /* CREATE_TRACE_POINTS */
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
new file mode 100644
index 00000000000..d6b05f42dd4
--- /dev/null
+++ b/include/trace/events/block.h
@@ -0,0 +1,493 @@
+#if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_BLOCK_H
+
+#include <linux/blktrace_api.h>
+#include <linux/blkdev.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM block
+
+TRACE_EVENT(block_rq_abort,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  int,		errors			)
+		__array(  char,		rwbs,	6		)
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
+		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+		__entry->errors    = rq->errors;
+
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+		blk_dump_cmd(__get_str(cmd), rq);
+	),
+
+	TP_printk("%d,%d %s (%s) %llu + %u [%d]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->errors)
+);
+
+TRACE_EVENT(block_rq_insert,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  unsigned int,	bytes			)
+		__array(  char,		rwbs,	6		)
+		__array(  char,         comm,   TASK_COMM_LEN   )
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
+		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+		__entry->bytes     = blk_pc_request(rq) ? blk_rq_bytes(rq) : 0;
+
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+		blk_dump_cmd(__get_str(cmd), rq);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %u (%s) %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __entry->bytes, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_rq_issue,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  unsigned int,	bytes			)
+		__array(  char,		rwbs,	6		)
+		__array(  char,		comm,   TASK_COMM_LEN   )
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
+		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+		__entry->bytes     = blk_pc_request(rq) ? blk_rq_bytes(rq) : 0;
+
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+		blk_dump_cmd(__get_str(cmd), rq);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %u (%s) %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __entry->bytes, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_rq_requeue,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  int,		errors			)
+		__array(  char,		rwbs,	6		)
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
+		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+		__entry->errors	   = rq->errors;
+
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+		blk_dump_cmd(__get_str(cmd), rq);
+	),
+
+	TP_printk("%d,%d %s (%s) %llu + %u [%d]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->errors)
+);
+
+TRACE_EVENT(block_rq_complete,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  int,		errors			)
+		__array(  char,		rwbs,	6		)
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
+		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
+		__entry->errors    = rq->errors;
+
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+		blk_dump_cmd(__get_str(cmd), rq);
+	),
+
+	TP_printk("%d,%d %s (%s) %llu + %u [%d]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->errors)
+);
+TRACE_EVENT(block_bio_bounce,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	6		)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_bio_complete,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned,	nr_sector	)
+		__field( int,		error		)
+		__array( char,		rwbs,	6	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%d]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->error)
+);
+
+TRACE_EVENT(block_bio_backmerge,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	6		)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_bio_frontmerge,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned,	nr_sector		)
+		__array( char,		rwbs,	6		)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_bio_queue,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	6		)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_getrq,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
+
+	TP_ARGS(q, bio, rw),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	6		)
+		__array( char,		comm,	TASK_COMM_LEN	)
+        ),
+
+	TP_fast_assign(
+		__entry->dev		= bio ? bio->bi_bdev->bd_dev : 0;
+		__entry->sector		= bio ? bio->bi_sector : 0;
+		__entry->nr_sector	= bio ? bio->bi_size >> 9 : 0;
+		blk_fill_rwbs(__entry->rwbs,
+			      bio ? bio->bi_rw : 0, __entry->nr_sector);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+        ),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_sleeprq,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
+
+	TP_ARGS(q, bio, rw),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	6		)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio ? bio->bi_bdev->bd_dev : 0;
+		__entry->sector		= bio ? bio->bi_sector : 0;
+		__entry->nr_sector	= bio ? bio->bi_size >> 9 : 0;
+		blk_fill_rwbs(__entry->rwbs,
+			    bio ? bio->bi_rw : 0, __entry->nr_sector);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+TRACE_EVENT(block_plug,
+
+	TP_PROTO(struct request_queue *q),
+
+	TP_ARGS(q),
+
+	TP_STRUCT__entry(
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("[%s]", __entry->comm)
+);
+
+TRACE_EVENT(block_unplug_timer,
+
+	TP_PROTO(struct request_queue *q),
+
+	TP_ARGS(q),
+
+	TP_STRUCT__entry(
+		__field( int,		nr_rq			)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->nr_rq	= q->rq.count[READ] + q->rq.count[WRITE];
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("[%s] %d", __entry->comm, __entry->nr_rq)
+);
+
+TRACE_EVENT(block_unplug_io,
+
+	TP_PROTO(struct request_queue *q),
+
+	TP_ARGS(q),
+
+	TP_STRUCT__entry(
+		__field( int,		nr_rq			)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->nr_rq	= q->rq.count[READ] + q->rq.count[WRITE];
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("[%s] %d", __entry->comm, __entry->nr_rq)
+);
+
+TRACE_EVENT(block_split,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio,
+		 unsigned int new_sector),
+
+	TP_ARGS(q, bio, new_sector),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev				)
+		__field( sector_t,	sector				)
+		__field( sector_t,	new_sector			)
+		__array( char,		rwbs,		6		)
+		__array( char,		comm,		TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->new_sector	= new_sector;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu / %llu [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  (unsigned long long)__entry->new_sector,
+		  __entry->comm)
+);
+
+TRACE_EVENT(block_remap,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, dev_t dev,
+		 sector_t from),
+
+	TP_ARGS(q, bio, dev, from),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned int,	nr_sector	)
+		__field( dev_t,		old_dev		)
+		__field( sector_t,	old_sector	)
+		__array( char,		rwbs,	6	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		__entry->old_dev	= dev;
+		__entry->old_sector	= from;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+	),
+
+	TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector,
+		  MAJOR(__entry->old_dev), MINOR(__entry->old_dev),
+		  (unsigned long long)__entry->old_sector)
+);
+
+#endif /* _TRACE_BLOCK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
+
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
new file mode 100644
index 00000000000..b0c7ede55eb
--- /dev/null
+++ b/include/trace/events/irq.h
@@ -0,0 +1,145 @@
+#if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_IRQ_H
+
+#include <linux/tracepoint.h>
+#include <linux/interrupt.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
+#define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
+#define show_softirq_name(val)			\
+	__print_symbolic(val,			\
+			 softirq_name(HI),	\
+			 softirq_name(TIMER),	\
+			 softirq_name(NET_TX),	\
+			 softirq_name(NET_RX),	\
+			 softirq_name(BLOCK),	\
+			 softirq_name(TASKLET),	\
+			 softirq_name(SCHED),	\
+			 softirq_name(HRTIMER),	\
+			 softirq_name(RCU))
+
+/**
+ * irq_handler_entry - called immediately before the irq action handler
+ * @irq: irq number
+ * @action: pointer to struct irqaction
+ *
+ * The struct irqaction pointed to by @action contains various
+ * information about the handler, including the device name,
+ * @action->name, and the device id, @action->dev_id. When used in
+ * conjunction with the irq_handler_exit tracepoint, we can figure
+ * out irq handler latencies.
+ */
+TRACE_EVENT(irq_handler_entry,
+
+	TP_PROTO(int irq, struct irqaction *action),
+
+	TP_ARGS(irq, action),
+
+	TP_STRUCT__entry(
+		__field(	int,	irq		)
+		__string(	name,	action->name	)
+	),
+
+	TP_fast_assign(
+		__entry->irq = irq;
+		__assign_str(name, action->name);
+	),
+
+	TP_printk("irq=%d handler=%s", __entry->irq, __get_str(name))
+);
+
+/**
+ * irq_handler_exit - called immediately after the irq action handler returns
+ * @irq: irq number
+ * @action: pointer to struct irqaction
+ * @ret: return value
+ *
+ * If the @ret value is set to IRQ_HANDLED, then we know that the corresponding
+ * @action->handler scuccessully handled this irq. Otherwise, the irq might be
+ * a shared irq line, or the irq was not handled successfully. Can be used in
+ * conjunction with the irq_handler_entry to understand irq handler latencies.
+ */
+TRACE_EVENT(irq_handler_exit,
+
+	TP_PROTO(int irq, struct irqaction *action, int ret),
+
+	TP_ARGS(irq, action, ret),
+
+	TP_STRUCT__entry(
+		__field(	int,	irq	)
+		__field(	int,	ret	)
+	),
+
+	TP_fast_assign(
+		__entry->irq	= irq;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("irq=%d return=%s",
+		  __entry->irq, __entry->ret ? "handled" : "unhandled")
+);
+
+/**
+ * softirq_entry - called immediately before the softirq handler
+ * @h: pointer to struct softirq_action
+ * @vec: pointer to first struct softirq_action in softirq_vec array
+ *
+ * The @h parameter, contains a pointer to the struct softirq_action
+ * which has a pointer to the action handler that is called. By subtracting
+ * the @vec pointer from the @h pointer, we can determine the softirq
+ * number. Also, when used in combination with the softirq_exit tracepoint
+ * we can determine the softirq latency.
+ */
+TRACE_EVENT(softirq_entry,
+
+	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+
+	TP_ARGS(h, vec),
+
+	TP_STRUCT__entry(
+		__field(	int,	vec			)
+	),
+
+	TP_fast_assign(
+		__entry->vec = (int)(h - vec);
+	),
+
+	TP_printk("softirq=%d action=%s", __entry->vec,
+		  show_softirq_name(__entry->vec))
+);
+
+/**
+ * softirq_exit - called immediately after the softirq handler returns
+ * @h: pointer to struct softirq_action
+ * @vec: pointer to first struct softirq_action in softirq_vec array
+ *
+ * The @h parameter contains a pointer to the struct softirq_action
+ * that has handled the softirq. By subtracting the @vec pointer from
+ * the @h pointer, we can determine the softirq number. Also, when used in
+ * combination with the softirq_entry tracepoint we can determine the softirq
+ * latency.
+ */
+TRACE_EVENT(softirq_exit,
+
+	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+
+	TP_ARGS(h, vec),
+
+	TP_STRUCT__entry(
+		__field(	int,	vec			)
+	),
+
+	TP_fast_assign(
+		__entry->vec = (int)(h - vec);
+	),
+
+	TP_printk("softirq=%d action=%s", __entry->vec,
+		  show_softirq_name(__entry->vec))
+);
+
+#endif /*  _TRACE_IRQ_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
new file mode 100644
index 00000000000..9baba50d651
--- /dev/null
+++ b/include/trace/events/kmem.h
@@ -0,0 +1,231 @@
+#if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KMEM_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
+/*
+ * The order of these masks is important. Matching masks will be seen
+ * first and the left over flags will end up showing by themselves.
+ *
+ * For example, if we have GFP_KERNEL before GFP_USER we wil get:
+ *
+ *  GFP_KERNEL|GFP_HARDWALL
+ *
+ * Thus most bits set go first.
+ */
+#define show_gfp_flags(flags)						\
+	(flags) ? __print_flags(flags, "|",				\
+	{(unsigned long)GFP_HIGHUSER_MOVABLE,	"GFP_HIGHUSER_MOVABLE"}, \
+	{(unsigned long)GFP_HIGHUSER,		"GFP_HIGHUSER"},	\
+	{(unsigned long)GFP_USER,		"GFP_USER"},		\
+	{(unsigned long)GFP_TEMPORARY,		"GFP_TEMPORARY"},	\
+	{(unsigned long)GFP_KERNEL,		"GFP_KERNEL"},		\
+	{(unsigned long)GFP_NOFS,		"GFP_NOFS"},		\
+	{(unsigned long)GFP_ATOMIC,		"GFP_ATOMIC"},		\
+	{(unsigned long)GFP_NOIO,		"GFP_NOIO"},		\
+	{(unsigned long)__GFP_HIGH,		"GFP_HIGH"},		\
+	{(unsigned long)__GFP_WAIT,		"GFP_WAIT"},		\
+	{(unsigned long)__GFP_IO,		"GFP_IO"},		\
+	{(unsigned long)__GFP_COLD,		"GFP_COLD"},		\
+	{(unsigned long)__GFP_NOWARN,		"GFP_NOWARN"},		\
+	{(unsigned long)__GFP_REPEAT,		"GFP_REPEAT"},		\
+	{(unsigned long)__GFP_NOFAIL,		"GFP_NOFAIL"},		\
+	{(unsigned long)__GFP_NORETRY,		"GFP_NORETRY"},		\
+	{(unsigned long)__GFP_COMP,		"GFP_COMP"},		\
+	{(unsigned long)__GFP_ZERO,		"GFP_ZERO"},		\
+	{(unsigned long)__GFP_NOMEMALLOC,	"GFP_NOMEMALLOC"},	\
+	{(unsigned long)__GFP_HARDWALL,		"GFP_HARDWALL"},	\
+	{(unsigned long)__GFP_THISNODE,		"GFP_THISNODE"},	\
+	{(unsigned long)__GFP_RECLAIMABLE,	"GFP_RECLAIMABLE"},	\
+	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"}		\
+	) : "GFP_NOWAIT"
+
+TRACE_EVENT(kmalloc,
+
+	TP_PROTO(unsigned long call_site,
+		 const void *ptr,
+		 size_t bytes_req,
+		 size_t bytes_alloc,
+		 gfp_t gfp_flags),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+		__field(	size_t,		bytes_req	)
+		__field(	size_t,		bytes_alloc	)
+		__field(	gfp_t,		gfp_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+		__entry->bytes_req	= bytes_req;
+		__entry->bytes_alloc	= bytes_alloc;
+		__entry->gfp_flags	= gfp_flags;
+	),
+
+	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s",
+		__entry->call_site,
+		__entry->ptr,
+		__entry->bytes_req,
+		__entry->bytes_alloc,
+		show_gfp_flags(__entry->gfp_flags))
+);
+
+TRACE_EVENT(kmem_cache_alloc,
+
+	TP_PROTO(unsigned long call_site,
+		 const void *ptr,
+		 size_t bytes_req,
+		 size_t bytes_alloc,
+		 gfp_t gfp_flags),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+		__field(	size_t,		bytes_req	)
+		__field(	size_t,		bytes_alloc	)
+		__field(	gfp_t,		gfp_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+		__entry->bytes_req	= bytes_req;
+		__entry->bytes_alloc	= bytes_alloc;
+		__entry->gfp_flags	= gfp_flags;
+	),
+
+	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s",
+		__entry->call_site,
+		__entry->ptr,
+		__entry->bytes_req,
+		__entry->bytes_alloc,
+		show_gfp_flags(__entry->gfp_flags))
+);
+
+TRACE_EVENT(kmalloc_node,
+
+	TP_PROTO(unsigned long call_site,
+		 const void *ptr,
+		 size_t bytes_req,
+		 size_t bytes_alloc,
+		 gfp_t gfp_flags,
+		 int node),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+		__field(	size_t,		bytes_req	)
+		__field(	size_t,		bytes_alloc	)
+		__field(	gfp_t,		gfp_flags	)
+		__field(	int,		node		)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+		__entry->bytes_req	= bytes_req;
+		__entry->bytes_alloc	= bytes_alloc;
+		__entry->gfp_flags	= gfp_flags;
+		__entry->node		= node;
+	),
+
+	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d",
+		__entry->call_site,
+		__entry->ptr,
+		__entry->bytes_req,
+		__entry->bytes_alloc,
+		show_gfp_flags(__entry->gfp_flags),
+		__entry->node)
+);
+
+TRACE_EVENT(kmem_cache_alloc_node,
+
+	TP_PROTO(unsigned long call_site,
+		 const void *ptr,
+		 size_t bytes_req,
+		 size_t bytes_alloc,
+		 gfp_t gfp_flags,
+		 int node),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+		__field(	size_t,		bytes_req	)
+		__field(	size_t,		bytes_alloc	)
+		__field(	gfp_t,		gfp_flags	)
+		__field(	int,		node		)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+		__entry->bytes_req	= bytes_req;
+		__entry->bytes_alloc	= bytes_alloc;
+		__entry->gfp_flags	= gfp_flags;
+		__entry->node		= node;
+	),
+
+	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d",
+		__entry->call_site,
+		__entry->ptr,
+		__entry->bytes_req,
+		__entry->bytes_alloc,
+		show_gfp_flags(__entry->gfp_flags),
+		__entry->node)
+);
+
+TRACE_EVENT(kfree,
+
+	TP_PROTO(unsigned long call_site, const void *ptr),
+
+	TP_ARGS(call_site, ptr),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+	),
+
+	TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
+);
+
+TRACE_EVENT(kmem_cache_free,
+
+	TP_PROTO(unsigned long call_site, const void *ptr),
+
+	TP_ARGS(call_site, ptr),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+	),
+
+	TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
+);
+#endif /* _TRACE_KMEM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/lockdep.h b/include/trace/events/lockdep.h
new file mode 100644
index 00000000000..0e956c9dfd7
--- /dev/null
+++ b/include/trace/events/lockdep.h
@@ -0,0 +1,96 @@
+#if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_LOCKDEP_H
+
+#include <linux/lockdep.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lockdep
+
+#ifdef CONFIG_LOCKDEP
+
+TRACE_EVENT(lock_acquire,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
+		int trylock, int read, int check,
+		struct lockdep_map *next_lock, unsigned long ip),
+
+	TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, flags)
+		__string(name, lock->name)
+	),
+
+	TP_fast_assign(
+		__entry->flags = (trylock ? 1 : 0) | (read ? 2 : 0);
+		__assign_str(name, lock->name);
+	),
+
+	TP_printk("%s%s%s", (__entry->flags & 1) ? "try " : "",
+		  (__entry->flags & 2) ? "read " : "",
+		  __get_str(name))
+);
+
+TRACE_EVENT(lock_release,
+
+	TP_PROTO(struct lockdep_map *lock, int nested, unsigned long ip),
+
+	TP_ARGS(lock, nested, ip),
+
+	TP_STRUCT__entry(
+		__string(name, lock->name)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+	),
+
+	TP_printk("%s", __get_str(name))
+);
+
+#ifdef CONFIG_LOCK_STAT
+
+TRACE_EVENT(lock_contended,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+	TP_ARGS(lock, ip),
+
+	TP_STRUCT__entry(
+		__string(name, lock->name)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+	),
+
+	TP_printk("%s", __get_str(name))
+);
+
+TRACE_EVENT(lock_acquired,
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip, s64 waittime),
+
+	TP_ARGS(lock, ip, waittime),
+
+	TP_STRUCT__entry(
+		__string(name, lock->name)
+		__field(unsigned long, wait_usec)
+		__field(unsigned long, wait_nsec_rem)
+	),
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+		__entry->wait_nsec_rem = do_div(waittime, NSEC_PER_USEC);
+		__entry->wait_usec = (unsigned long) waittime;
+	),
+	TP_printk("%s (%lu.%03lu us)", __get_str(name), __entry->wait_usec,
+				       __entry->wait_nsec_rem)
+);
+
+#endif
+#endif
+
+#endif /* _TRACE_LOCKDEP_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/sched_event_types.h b/include/trace/events/sched.h
index 63547dc1125..24ab5bcff7b 100644
--- a/include/trace/sched_event_types.h
+++ b/include/trace/events/sched.h
@@ -1,9 +1,8 @@
+#if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SCHED_H
 
-/* use <trace/sched.h> instead */
-#ifndef TRACE_EVENT
-# error Do not include this file directly.
-# error Unless you know what you are doing.
-#endif
+#include <linux/sched.h>
+#include <linux/tracepoint.h>
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM sched
@@ -157,6 +156,7 @@ TRACE_EVENT(sched_switch,
 		__array(	char,	prev_comm,	TASK_COMM_LEN	)
 		__field(	pid_t,	prev_pid			)
 		__field(	int,	prev_prio			)
+		__field(	long,	prev_state			)
 		__array(	char,	next_comm,	TASK_COMM_LEN	)
 		__field(	pid_t,	next_pid			)
 		__field(	int,	next_prio			)
@@ -166,13 +166,19 @@ TRACE_EVENT(sched_switch,
 		memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
 		__entry->prev_pid	= prev->pid;
 		__entry->prev_prio	= prev->prio;
+		__entry->prev_state	= prev->state;
 		memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
 		__entry->next_pid	= next->pid;
 		__entry->next_prio	= next->prio;
 	),
 
-	TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
+	TP_printk("task %s:%d [%d] (%s) ==> %s:%d [%d]",
 		__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
+		__entry->prev_state ?
+		  __print_flags(__entry->prev_state, "|",
+				{ 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" },
+				{ 16, "Z" }, { 32, "X" }, { 64, "x" },
+				{ 128, "W" }) : "R",
 		__entry->next_comm, __entry->next_pid, __entry->next_prio)
 );
 
@@ -181,9 +187,9 @@ TRACE_EVENT(sched_switch,
  */
 TRACE_EVENT(sched_migrate_task,
 
-	TP_PROTO(struct task_struct *p, int orig_cpu, int dest_cpu),
+	TP_PROTO(struct task_struct *p, int dest_cpu),
 
-	TP_ARGS(p, orig_cpu, dest_cpu),
+	TP_ARGS(p, dest_cpu),
 
 	TP_STRUCT__entry(
 		__array(	char,	comm,	TASK_COMM_LEN	)
@@ -197,7 +203,7 @@ TRACE_EVENT(sched_migrate_task,
 		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
 		__entry->pid		= p->pid;
 		__entry->prio		= p->prio;
-		__entry->orig_cpu	= orig_cpu;
+		__entry->orig_cpu	= task_cpu(p);
 		__entry->dest_cpu	= dest_cpu;
 	),
 
@@ -334,4 +340,7 @@ TRACE_EVENT(sched_signal_send,
 		  __entry->sig, __entry->comm, __entry->pid)
 );
 
-#undef TRACE_SYSTEM
+#endif /* _TRACE_SCHED_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h
new file mode 100644
index 00000000000..1e8fabb57c0
--- /dev/null
+++ b/include/trace/events/skb.h
@@ -0,0 +1,40 @@
+#if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SKB_H
+
+#include <linux/skbuff.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
+/*
+ * Tracepoint for free an sk_buff:
+ */
+TRACE_EVENT(kfree_skb,
+
+	TP_PROTO(struct sk_buff *skb, void *location),
+
+	TP_ARGS(skb, location),
+
+	TP_STRUCT__entry(
+		__field(	void *,		skbaddr		)
+		__field(	unsigned short,	protocol	)
+		__field(	void *,		location	)
+	),
+
+	TP_fast_assign(
+		__entry->skbaddr = skb;
+		if (skb) {
+			__entry->protocol = ntohs(skb->protocol);
+		}
+		__entry->location = location;
+	),
+
+	TP_printk("skbaddr=%p protocol=%u location=%p",
+		__entry->skbaddr, __entry->protocol, __entry->location)
+);
+
+#endif /* _TRACE_SKB_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
new file mode 100644
index 00000000000..035f1bff288
--- /dev/null
+++ b/include/trace/events/workqueue.h
@@ -0,0 +1,100 @@
+#if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_WORKQUEUE_H
+
+#include <linux/workqueue.h>
+#include <linux/sched.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM workqueue
+
+TRACE_EVENT(workqueue_insertion,
+
+	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
+
+	TP_ARGS(wq_thread, work),
+
+	TP_STRUCT__entry(
+		__array(char,		thread_comm,	TASK_COMM_LEN)
+		__field(pid_t,		thread_pid)
+		__field(work_func_t,	func)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
+		__entry->thread_pid	= wq_thread->pid;
+		__entry->func		= work->func;
+	),
+
+	TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+		__entry->thread_pid, __entry->func)
+);
+
+TRACE_EVENT(workqueue_execution,
+
+	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
+
+	TP_ARGS(wq_thread, work),
+
+	TP_STRUCT__entry(
+		__array(char,		thread_comm,	TASK_COMM_LEN)
+		__field(pid_t,		thread_pid)
+		__field(work_func_t,	func)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
+		__entry->thread_pid	= wq_thread->pid;
+		__entry->func		= work->func;
+	),
+
+	TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+		__entry->thread_pid, __entry->func)
+);
+
+/* Trace the creation of one workqueue thread on a cpu */
+TRACE_EVENT(workqueue_creation,
+
+	TP_PROTO(struct task_struct *wq_thread, int cpu),
+
+	TP_ARGS(wq_thread, cpu),
+
+	TP_STRUCT__entry(
+		__array(char,	thread_comm,	TASK_COMM_LEN)
+		__field(pid_t,	thread_pid)
+		__field(int,	cpu)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
+		__entry->thread_pid	= wq_thread->pid;
+		__entry->cpu		= cpu;
+	),
+
+	TP_printk("thread=%s:%d cpu=%d", __entry->thread_comm,
+		__entry->thread_pid, __entry->cpu)
+);
+
+TRACE_EVENT(workqueue_destruction,
+
+	TP_PROTO(struct task_struct *wq_thread),
+
+	TP_ARGS(wq_thread),
+
+	TP_STRUCT__entry(
+		__array(char,	thread_comm,	TASK_COMM_LEN)
+		__field(pid_t,	thread_pid)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
+		__entry->thread_pid	= wq_thread->pid;
+	),
+
+	TP_printk("thread=%s:%d", __entry->thread_comm, __entry->thread_pid)
+);
+
+#endif /* _TRACE_WORKQUEUE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
new file mode 100644
index 00000000000..1867553c61e
--- /dev/null
+++ b/include/trace/ftrace.h
@@ -0,0 +1,591 @@
+/*
+ * Stage 1 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * struct ftrace_raw_<call> {
+ *	struct trace_entry		ent;
+ *	<type>				<item>;
+ *	<type2>				<item2>[<len>];
+ *	[...]
+ * };
+ *
+ * The <type> <item> is created by the __field(type, item) macro or
+ * the __array(type2, item2, len) macro.
+ * We simply do "type item;", and that will create the fields
+ * in the structure.
+ */
+
+#include <linux/ftrace_event.h>
+
+#undef __field
+#define __field(type, item)		type	item;
+
+#undef __array
+#define __array(type, item, len)	type	item[len];
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len) unsigned short __data_loc_##item;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef TP_STRUCT__entry
+#define TP_STRUCT__entry(args...) args
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
+	struct ftrace_raw_##name {				\
+		struct trace_entry	ent;			\
+		tstruct						\
+		char			__data[0];		\
+	};							\
+	static struct ftrace_event_call event_##name
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+
+/*
+ * Stage 2 of the trace events.
+ *
+ * Include the following:
+ *
+ * struct ftrace_data_offsets_<call> {
+ *	int				<item1>;
+ *	int				<item2>;
+ *	[...]
+ * };
+ *
+ * The __dynamic_array() macro will create each int <item>, this is
+ * to keep the offset of each array from the beginning of the event.
+ */
+
+#undef __field
+#define __field(type, item);
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)	int item;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+	struct ftrace_data_offsets_##call {				\
+		tstruct;						\
+	};
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Setup the showing format of trace point.
+ *
+ * int
+ * ftrace_format_##call(struct trace_seq *s)
+ * {
+ *	struct ftrace_raw_##call field;
+ *	int ret;
+ *
+ *	ret = trace_seq_printf(s, #type " " #item ";"
+ *			       " offset:%u; size:%u;\n",
+ *			       offsetof(struct ftrace_raw_##call, item),
+ *			       sizeof(field.type));
+ *
+ * }
+ */
+
+#undef TP_STRUCT__entry
+#define TP_STRUCT__entry(args...) args
+
+#undef __field
+#define __field(type, item)					\
+	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
+			       "offset:%u;\tsize:%u;\n",		\
+			       (unsigned int)offsetof(typeof(field), item), \
+			       (unsigned int)sizeof(field.item));	\
+	if (!ret)							\
+		return 0;
+
+#undef __array
+#define __array(type, item, len)						\
+	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t"	\
+			       "offset:%u;\tsize:%u;\n",		\
+			       (unsigned int)offsetof(typeof(field), item), \
+			       (unsigned int)sizeof(field.item));	\
+	if (!ret)							\
+		return 0;
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				       \
+	ret = trace_seq_printf(s, "\tfield:__data_loc " #item ";\t"	       \
+			       "offset:%u;\tsize:%u;\n",		       \
+			       (unsigned int)offsetof(typeof(field),	       \
+					__data_loc_##item),		       \
+			       (unsigned int)sizeof(field.__data_loc_##item)); \
+	if (!ret)							       \
+		return 0;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef __entry
+#define __entry REC
+
+#undef __print_symbolic
+#undef __get_dynamic_array
+#undef __get_str
+
+#undef TP_printk
+#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
+
+#undef TP_fast_assign
+#define TP_fast_assign(args...) args
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
+static int								\
+ftrace_format_##call(struct trace_seq *s)				\
+{									\
+	struct ftrace_raw_##call field __attribute__((unused));		\
+	int ret = 0;							\
+									\
+	tstruct;							\
+									\
+	trace_seq_printf(s, "\nprint fmt: " print);			\
+									\
+	return ret;							\
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Stage 3 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * enum print_line_t
+ * ftrace_raw_output_<call>(struct trace_iterator *iter, int flags)
+ * {
+ *	struct trace_seq *s = &iter->seq;
+ *	struct ftrace_raw_<call> *field; <-- defined in stage 1
+ *	struct trace_entry *entry;
+ *	struct trace_seq *p;
+ *	int ret;
+ *
+ *	entry = iter->ent;
+ *
+ *	if (entry->type != event_<call>.id) {
+ *		WARN_ON_ONCE(1);
+ *		return TRACE_TYPE_UNHANDLED;
+ *	}
+ *
+ *	field = (typeof(field))entry;
+ *
+ *	p = get_cpu_var(ftrace_event_seq);
+ *	trace_seq_init(p);
+ *	ret = trace_seq_printf(s, <TP_printk> "\n");
+ *	put_cpu();
+ *	if (!ret)
+ *		return TRACE_TYPE_PARTIAL_LINE;
+ *
+ *	return TRACE_TYPE_HANDLED;
+ * }
+ *
+ * This is the method used to print the raw event to the trace
+ * output format. Note, this is not needed if the data is read
+ * in binary.
+ */
+
+#undef __entry
+#define __entry field
+
+#undef TP_printk
+#define TP_printk(fmt, args...) fmt "\n", args
+
+#undef __get_dynamic_array
+#define __get_dynamic_array(field)	\
+		((void *)__entry + __entry->__data_loc_##field)
+
+#undef __get_str
+#define __get_str(field) (char *)__get_dynamic_array(field)
+
+#undef __print_flags
+#define __print_flags(flag, delim, flag_array...)			\
+	({								\
+		static const struct trace_print_flags flags[] =		\
+			{ flag_array, { -1, NULL }};			\
+		ftrace_print_flags_seq(p, delim, flag, flags);		\
+	})
+
+#undef __print_symbolic
+#define __print_symbolic(value, symbol_array...)			\
+	({								\
+		static const struct trace_print_flags symbols[] =	\
+			{ symbol_array, { -1, NULL }};			\
+		ftrace_print_symbols_seq(p, value, symbols);		\
+	})
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+enum print_line_t							\
+ftrace_raw_output_##call(struct trace_iterator *iter, int flags)	\
+{									\
+	struct trace_seq *s = &iter->seq;				\
+	struct ftrace_raw_##call *field;				\
+	struct trace_entry *entry;					\
+	struct trace_seq *p;						\
+	int ret;							\
+									\
+	entry = iter->ent;						\
+									\
+	if (entry->type != event_##call.id) {				\
+		WARN_ON_ONCE(1);					\
+		return TRACE_TYPE_UNHANDLED;				\
+	}								\
+									\
+	field = (typeof(field))entry;					\
+									\
+	p = &get_cpu_var(ftrace_event_seq);				\
+	trace_seq_init(p);						\
+	ret = trace_seq_printf(s, #call ": " print);			\
+	put_cpu();							\
+	if (!ret)							\
+		return TRACE_TYPE_PARTIAL_LINE;				\
+									\
+	return TRACE_TYPE_HANDLED;					\
+}
+	
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef __field
+#define __field(type, item)						\
+	ret = trace_define_field(event_call, #type, #item,		\
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item), is_signed_type(type));	\
+	if (ret)							\
+		return ret;
+
+#undef __array
+#define __array(type, item, len)					\
+	BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);				\
+	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item), 0);		\
+	if (ret)							\
+		return ret;
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				       \
+	ret = trace_define_field(event_call, "__data_loc" "[" #type "]", #item,\
+				offsetof(typeof(field), __data_loc_##item),    \
+				 sizeof(field.__data_loc_##item), 0);
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
+int									\
+ftrace_define_fields_##call(void)					\
+{									\
+	struct ftrace_raw_##call field;					\
+	struct ftrace_event_call *event_call = &event_##call;		\
+	int ret;							\
+									\
+	__common_field(int, type, 1);					\
+	__common_field(unsigned char, flags, 0);			\
+	__common_field(unsigned char, preempt_count, 0);		\
+	__common_field(int, pid, 1);					\
+	__common_field(int, tgid, 1);					\
+									\
+	tstruct;							\
+									\
+	return ret;							\
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * remember the offset of each array from the beginning of the event.
+ */
+
+#undef __entry
+#define __entry entry
+
+#undef __field
+#define __field(type, item)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				\
+	__data_offsets->item = __data_size +				\
+			       offsetof(typeof(*entry), __data);	\
+	__data_size += (len) * sizeof(type);
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)       \
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+static inline int ftrace_get_offsets_##call(				\
+	struct ftrace_data_offsets_##call *__data_offsets, proto)       \
+{									\
+	int __data_size = 0;						\
+	struct ftrace_raw_##call __maybe_unused *entry;			\
+									\
+	tstruct;							\
+									\
+	return __data_size;						\
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Stage 4 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * static void ftrace_event_<call>(proto)
+ * {
+ *	event_trace_printk(_RET_IP_, "<call>: " <fmt>);
+ * }
+ *
+ * static int ftrace_reg_event_<call>(void)
+ * {
+ *	int ret;
+ *
+ *	ret = register_trace_<call>(ftrace_event_<call>);
+ *	if (!ret)
+ *		pr_info("event trace: Could not activate trace point "
+ *			"probe to  <call>");
+ *	return ret;
+ * }
+ *
+ * static void ftrace_unreg_event_<call>(void)
+ * {
+ *	unregister_trace_<call>(ftrace_event_<call>);
+ * }
+ *
+ *
+ * For those macros defined with TRACE_EVENT:
+ *
+ * static struct ftrace_event_call event_<call>;
+ *
+ * static void ftrace_raw_event_<call>(proto)
+ * {
+ *	struct ring_buffer_event *event;
+ *	struct ftrace_raw_<call> *entry; <-- defined in stage 1
+ *	unsigned long irq_flags;
+ *	int pc;
+ *
+ *	local_save_flags(irq_flags);
+ *	pc = preempt_count();
+ *
+ *	event = trace_current_buffer_lock_reserve(event_<call>.id,
+ *				  sizeof(struct ftrace_raw_<call>),
+ *				  irq_flags, pc);
+ *	if (!event)
+ *		return;
+ *	entry	= ring_buffer_event_data(event);
+ *
+ *	<assign>;  <-- Here we assign the entries by the __field and
+ *			__array macros.
+ *
+ *	trace_current_buffer_unlock_commit(event, irq_flags, pc);
+ * }
+ *
+ * static int ftrace_raw_reg_event_<call>(void)
+ * {
+ *	int ret;
+ *
+ *	ret = register_trace_<call>(ftrace_raw_event_<call>);
+ *	if (!ret)
+ *		pr_info("event trace: Could not activate trace point "
+ *			"probe to <call>");
+ *	return ret;
+ * }
+ *
+ * static void ftrace_unreg_event_<call>(void)
+ * {
+ *	unregister_trace_<call>(ftrace_raw_event_<call>);
+ * }
+ *
+ * static struct trace_event ftrace_event_type_<call> = {
+ *	.trace			= ftrace_raw_output_<call>, <-- stage 2
+ * };
+ *
+ * static int ftrace_raw_init_event_<call>(void)
+ * {
+ *	int id;
+ *
+ *	id = register_ftrace_event(&ftrace_event_type_<call>);
+ *	if (!id)
+ *		return -ENODEV;
+ *	event_<call>.id = id;
+ *	return 0;
+ * }
+ *
+ * static struct ftrace_event_call __used
+ * __attribute__((__aligned__(4)))
+ * __attribute__((section("_ftrace_events"))) event_<call> = {
+ *	.name			= "<call>",
+ *	.system			= "<system>",
+ *	.raw_init		= ftrace_raw_init_event_<call>,
+ *	.regfunc		= ftrace_reg_event_<call>,
+ *	.unregfunc		= ftrace_unreg_event_<call>,
+ *	.show_format		= ftrace_format_<call>,
+ * }
+ *
+ */
+
+#undef TP_FMT
+#define TP_FMT(fmt, args...)	fmt "\n", ##args
+
+#ifdef CONFIG_EVENT_PROFILE
+#define _TRACE_PROFILE(call, proto, args)				\
+static void ftrace_profile_##call(proto)				\
+{									\
+	extern void perf_tpcounter_event(int);				\
+	perf_tpcounter_event(event_##call.id);				\
+}									\
+									\
+static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
+{									\
+	int ret = 0;							\
+									\
+	if (!atomic_inc_return(&event_call->profile_count))		\
+		ret = register_trace_##call(ftrace_profile_##call);	\
+									\
+	return ret;							\
+}									\
+									\
+static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
+{									\
+	if (atomic_add_negative(-1, &event_call->profile_count))	\
+		unregister_trace_##call(ftrace_profile_##call);		\
+}
+
+#define _TRACE_PROFILE_INIT(call)					\
+	.profile_count = ATOMIC_INIT(-1),				\
+	.profile_enable = ftrace_profile_enable_##call,			\
+	.profile_disable = ftrace_profile_disable_##call,
+
+#else
+#define _TRACE_PROFILE(call, proto, args)
+#define _TRACE_PROFILE_INIT(call)
+#endif
+
+#undef __entry
+#define __entry entry
+
+#undef __field
+#define __field(type, item)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				\
+	__entry->__data_loc_##item = __data_offsets.item;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)       	\
+
+#undef __assign_str
+#define __assign_str(dst, src)						\
+	strcpy(__get_str(dst), src);
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args))			\
+									\
+static struct ftrace_event_call event_##call;				\
+									\
+static void ftrace_raw_event_##call(proto)				\
+{									\
+	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
+	struct ftrace_event_call *event_call = &event_##call;		\
+	struct ring_buffer_event *event;				\
+	struct ftrace_raw_##call *entry;				\
+	unsigned long irq_flags;					\
+	int __data_size;						\
+	int pc;								\
+									\
+	local_save_flags(irq_flags);					\
+	pc = preempt_count();						\
+									\
+	__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
+									\
+	event = trace_current_buffer_lock_reserve(event_##call.id,	\
+				 sizeof(*entry) + __data_size,		\
+				 irq_flags, pc);			\
+	if (!event)							\
+		return;							\
+	entry	= ring_buffer_event_data(event);			\
+									\
+									\
+	tstruct								\
+									\
+	{ assign; }							\
+									\
+	if (!filter_current_check_discard(event_call, entry, event))	\
+		trace_nowake_buffer_unlock_commit(event, irq_flags, pc); \
+}									\
+									\
+static int ftrace_raw_reg_event_##call(void)				\
+{									\
+	int ret;							\
+									\
+	ret = register_trace_##call(ftrace_raw_event_##call);		\
+	if (ret)							\
+		pr_info("event trace: Could not activate trace point "	\
+			"probe to " #call "\n");			\
+	return ret;							\
+}									\
+									\
+static void ftrace_raw_unreg_event_##call(void)				\
+{									\
+	unregister_trace_##call(ftrace_raw_event_##call);		\
+}									\
+									\
+static struct trace_event ftrace_event_type_##call = {			\
+	.trace			= ftrace_raw_output_##call,		\
+};									\
+									\
+static int ftrace_raw_init_event_##call(void)				\
+{									\
+	int id;								\
+									\
+	id = register_ftrace_event(&ftrace_event_type_##call);		\
+	if (!id)							\
+		return -ENODEV;						\
+	event_##call.id = id;						\
+	INIT_LIST_HEAD(&event_##call.fields);				\
+	init_preds(&event_##call);					\
+	return 0;							\
+}									\
+									\
+static struct ftrace_event_call __used					\
+__attribute__((__aligned__(4)))						\
+__attribute__((section("_ftrace_events"))) event_##call = {		\
+	.name			= #call,				\
+	.system			= __stringify(TRACE_SYSTEM),		\
+	.event			= &ftrace_event_type_##call,		\
+	.raw_init		= ftrace_raw_init_event_##call,		\
+	.regfunc		= ftrace_raw_reg_event_##call,		\
+	.unregfunc		= ftrace_raw_unreg_event_##call,	\
+	.show_format		= ftrace_format_##call,			\
+	.define_fields		= ftrace_define_fields_##call,		\
+	_TRACE_PROFILE_INIT(call)					\
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef _TRACE_PROFILE
+#undef _TRACE_PROFILE_INIT
+
diff --git a/include/trace/irq.h b/include/trace/irq.h
deleted file mode 100644
index ff5d4495dc3..00000000000
--- a/include/trace/irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _TRACE_IRQ_H
-#define _TRACE_IRQ_H
-
-#include <linux/interrupt.h>
-#include <linux/tracepoint.h>
-
-#include <trace/irq_event_types.h>
-
-#endif
diff --git a/include/trace/irq_event_types.h b/include/trace/irq_event_types.h
deleted file mode 100644
index 85964ebd47e..00000000000
--- a/include/trace/irq_event_types.h
+++ /dev/null
@@ -1,55 +0,0 @@
-
-/* use <trace/irq.h> instead */
-#ifndef TRACE_FORMAT
-# error Do not include this file directly.
-# error Unless you know what you are doing.
-#endif
-
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM irq
-
-/*
- * Tracepoint for entry of interrupt handler:
- */
-TRACE_FORMAT(irq_handler_entry,
-	TP_PROTO(int irq, struct irqaction *action),
-	TP_ARGS(irq, action),
-	TP_FMT("irq=%d handler=%s", irq, action->name)
-	);
-
-/*
- * Tracepoint for return of an interrupt handler:
- */
-TRACE_EVENT(irq_handler_exit,
-
-	TP_PROTO(int irq, struct irqaction *action, int ret),
-
-	TP_ARGS(irq, action, ret),
-
-	TP_STRUCT__entry(
-		__field(	int,	irq	)
-		__field(	int,	ret	)
-	),
-
-	TP_fast_assign(
-		__entry->irq	= irq;
-		__entry->ret	= ret;
-	),
-
-	TP_printk("irq=%d return=%s",
-		  __entry->irq, __entry->ret ? "handled" : "unhandled")
-);
-
-TRACE_FORMAT(softirq_entry,
-	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
-	TP_ARGS(h, vec),
-	TP_FMT("softirq=%d action=%s", (int)(h - vec), softirq_to_name[h-vec])
-	);
-
-TRACE_FORMAT(softirq_exit,
-	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
-	TP_ARGS(h, vec),
-	TP_FMT("softirq=%d action=%s", (int)(h - vec), softirq_to_name[h-vec])
-	);
-
-#undef TRACE_SYSTEM
diff --git a/include/trace/kmemtrace.h b/include/trace/kmemtrace.h
deleted file mode 100644
index 28ee69f9cd4..00000000000
--- a/include/trace/kmemtrace.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2008 Eduard - Gabriel Munteanu
- *
- * This file is released under GPL version 2.
- */
-
-#ifndef _LINUX_KMEMTRACE_H
-#define _LINUX_KMEMTRACE_H
-
-#ifdef __KERNEL__
-
-#include <linux/tracepoint.h>
-#include <linux/types.h>
-
-#ifdef CONFIG_KMEMTRACE
-extern void kmemtrace_init(void);
-#else
-static inline void kmemtrace_init(void)
-{
-}
-#endif
-
-DECLARE_TRACE(kmalloc,
-	      TP_PROTO(unsigned long call_site,
-		      const void *ptr,
-		      size_t bytes_req,
-		      size_t bytes_alloc,
-		      gfp_t gfp_flags),
-	      TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags));
-DECLARE_TRACE(kmem_cache_alloc,
-	      TP_PROTO(unsigned long call_site,
-		      const void *ptr,
-		      size_t bytes_req,
-		      size_t bytes_alloc,
-		      gfp_t gfp_flags),
-	      TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags));
-DECLARE_TRACE(kmalloc_node,
-	      TP_PROTO(unsigned long call_site,
-		      const void *ptr,
-		      size_t bytes_req,
-		      size_t bytes_alloc,
-		      gfp_t gfp_flags,
-		      int node),
-	      TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node));
-DECLARE_TRACE(kmem_cache_alloc_node,
-	      TP_PROTO(unsigned long call_site,
-		      const void *ptr,
-		      size_t bytes_req,
-		      size_t bytes_alloc,
-		      gfp_t gfp_flags,
-		      int node),
-	      TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node));
-DECLARE_TRACE(kfree,
-	      TP_PROTO(unsigned long call_site, const void *ptr),
-	      TP_ARGS(call_site, ptr));
-DECLARE_TRACE(kmem_cache_free,
-	      TP_PROTO(unsigned long call_site, const void *ptr),
-	      TP_ARGS(call_site, ptr));
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_KMEMTRACE_H */
-
diff --git a/include/trace/lockdep.h b/include/trace/lockdep.h
deleted file mode 100644
index 5ca67df87f2..00000000000
--- a/include/trace/lockdep.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _TRACE_LOCKDEP_H
-#define _TRACE_LOCKDEP_H
-
-#include <linux/lockdep.h>
-#include <linux/tracepoint.h>
-
-#include <trace/lockdep_event_types.h>
-
-#endif
diff --git a/include/trace/lockdep_event_types.h b/include/trace/lockdep_event_types.h
deleted file mode 100644
index adccfcd2ec8..00000000000
--- a/include/trace/lockdep_event_types.h
+++ /dev/null
@@ -1,44 +0,0 @@
-
-#ifndef TRACE_FORMAT
-# error Do not include this file directly.
-# error Unless you know what you are doing.
-#endif
-
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lock
-
-#ifdef CONFIG_LOCKDEP
-
-TRACE_FORMAT(lock_acquire,
-	TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
-		int trylock, int read, int check,
-		struct lockdep_map *next_lock, unsigned long ip),
-	TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
-	TP_FMT("%s%s%s", trylock ? "try " : "",
-		read ? "read " : "", lock->name)
-	);
-
-TRACE_FORMAT(lock_release,
-	TP_PROTO(struct lockdep_map *lock, int nested, unsigned long ip),
-	TP_ARGS(lock, nested, ip),
-	TP_FMT("%s", lock->name)
-	);
-
-#ifdef CONFIG_LOCK_STAT
-
-TRACE_FORMAT(lock_contended,
-	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
-	TP_ARGS(lock, ip),
-	TP_FMT("%s", lock->name)
-	);
-
-TRACE_FORMAT(lock_acquired,
-	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
-	TP_ARGS(lock, ip),
-	TP_FMT("%s", lock->name)
-	);
-
-#endif
-#endif
-
-#undef TRACE_SYSTEM
diff --git a/include/trace/sched.h b/include/trace/sched.h
deleted file mode 100644
index 4e372a1a29b..00000000000
--- a/include/trace/sched.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _TRACE_SCHED_H
-#define _TRACE_SCHED_H
-
-#include <linux/sched.h>
-#include <linux/tracepoint.h>
-
-#include <trace/sched_event_types.h>
-
-#endif
diff --git a/include/trace/skb.h b/include/trace/skb.h
deleted file mode 100644
index b66206d9be7..00000000000
--- a/include/trace/skb.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _TRACE_SKB_H_
-#define _TRACE_SKB_H_
-
-#include <linux/skbuff.h>
-#include <linux/tracepoint.h>
-
-DECLARE_TRACE(kfree_skb,
-	TP_PROTO(struct sk_buff *skb, void *location),
-	TP_ARGS(skb, location));
-
-#endif
diff --git a/include/trace/trace_event_types.h b/include/trace/trace_event_types.h
deleted file mode 100644
index df56f5694be..00000000000
--- a/include/trace/trace_event_types.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* trace/<type>_event_types.h here */
-
-#include <trace/sched_event_types.h>
-#include <trace/irq_event_types.h>
-#include <trace/lockdep_event_types.h>
diff --git a/include/trace/trace_events.h b/include/trace/trace_events.h
deleted file mode 100644
index fd13750ca4b..00000000000
--- a/include/trace/trace_events.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* trace/<type>.h here */
-
-#include <trace/sched.h>
-#include <trace/irq.h>
-#include <trace/lockdep.h>
diff --git a/include/trace/workqueue.h b/include/trace/workqueue.h
deleted file mode 100644
index 7626523deeb..00000000000
--- a/include/trace/workqueue.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __TRACE_WORKQUEUE_H
-#define __TRACE_WORKQUEUE_H
-
-#include <linux/tracepoint.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-
-DECLARE_TRACE(workqueue_insertion,
-	   TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
-	   TP_ARGS(wq_thread, work));
-
-DECLARE_TRACE(workqueue_execution,
-	   TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
-	   TP_ARGS(wq_thread, work));
-
-/* Trace the creation of one workqueue thread on a cpu */
-DECLARE_TRACE(workqueue_creation,
-	   TP_PROTO(struct task_struct *wq_thread, int cpu),
-	   TP_ARGS(wq_thread, cpu));
-
-DECLARE_TRACE(workqueue_destruction,
-	   TP_PROTO(struct task_struct *wq_thread),
-	   TP_ARGS(wq_thread));
-
-#endif /* __TRACE_WORKQUEUE_H */
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000000..b5cc72fe046
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24		0
+#define PIN_MODE_DUMB_18_SPI		1
+#define PIN_MODE_DUMB_18_GPIO		2
+#define PIN_MODE_DUMB_16_SPI		3
+#define PIN_MODE_DUMB_16_GPIO		4
+#define PIN_MODE_DUMB_12_SPI_GPIO	5
+#define PIN_MODE_SMART_18_SPI		6
+#define PIN_MODE_SMART_16_SPI		7
+#define PIN_MODE_SMART_8_SPI_GPIO	8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565		0
+#define DUMB_MODE_RGB565_UPPER		1
+#define DUMB_MODE_RGB666		2
+#define DUMB_MODE_RGB666_UPPER		3
+#define DUMB_MODE_RGB444		4
+#define DUMB_MODE_RGB444_UPPER		5
+#define DUMB_MODE_RGB888		6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE	(800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565		0
+#define PIX_FMT_BGR565		1
+#define PIX_FMT_RGB1555		2
+#define PIX_FMT_BGR1555		3
+#define PIX_FMT_RGB888PACK	4
+#define PIX_FMT_BGR888PACK	5
+#define PIX_FMT_RGB888UNPACK	6
+#define PIX_FMT_BGR888UNPACK	7
+#define PIX_FMT_RGBA888		8
+#define PIX_FMT_BGRA888		9
+#define PIX_FMT_YUV422PACK	10
+#define PIX_FMT_YVU422PACK	11
+#define PIX_FMT_YUV422PLANAR	12
+#define PIX_FMT_YVU422PLANAR	13
+#define PIX_FMT_YUV420PLANAR	14
+#define PIX_FMT_YVU420PLANAR	15
+#define PIX_FMT_PSEUDOCOLOR	20
+#define PIX_FMT_UYVY422PACK	(0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+	struct fb_info		*info;
+
+	void __iomem		*reg_base;
+	dma_addr_t		fb_start_dma;
+	u32			pseudo_palette[16];
+
+	int			pix_fmt;
+	unsigned		is_blanked:1;
+	unsigned		panel_rbswap:1;
+	unsigned		active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+	char	id[16];
+
+	int		num_modes;
+	struct fb_videomode *modes;
+
+	/*
+	 * Pix_fmt
+	 */
+	unsigned	pix_fmt;
+
+	/*
+	 * I/O pin allocation.
+	 */
+	unsigned	io_pin_allocation_mode:4;
+
+	/*
+	 * Dumb panel -- assignment of R/G/B component info to the 24
+	 * available external data lanes.
+	 */
+	unsigned	dumb_mode:4;
+	unsigned	panel_rgb_reverse_lanes:1;
+
+	/*
+	 * Dumb panel -- GPIO output data.
+	 */
+	unsigned	gpio_output_mask:8;
+	unsigned	gpio_output_data:8;
+
+	/*
+	 * Dumb panel -- configurable output signal polarity.
+	 */
+	unsigned	invert_composite_blank:1;
+	unsigned	invert_pix_val_ena:1;
+	unsigned	invert_pixclock:1;
+	unsigned	invert_vsync:1;
+	unsigned	invert_hsync:1;
+	unsigned	panel_rbswap:1;
+	unsigned	active:1;
+	unsigned	enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/include/xen/Kbuild b/include/xen/Kbuild
new file mode 100644
index 00000000000..4e65c16a445
--- /dev/null
+++ b/include/xen/Kbuild
@@ -0,0 +1 @@
+header-y += evtchn.h
diff --git a/include/xen/events.h b/include/xen/events.h
index 0d5f1adc036..e68d59a90ca 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -53,4 +53,7 @@ bool xen_test_irq_pending(int irq);
    irq will be disabled so it won't deliver an interrupt. */
 void xen_poll_irq(int irq);
 
+/* Determine the IRQ which is bound to an event channel */
+unsigned irq_from_evtchn(unsigned int evtchn);
+
 #endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/evtchn.h b/include/xen/evtchn.h
new file mode 100644
index 00000000000..14e833ee4e0
--- /dev/null
+++ b/include/xen/evtchn.h
@@ -0,0 +1,88 @@
+/******************************************************************************
+ * evtchn.h
+ *
+ * Interface to /dev/xen/evtchn.
+ *
+ * Copyright (c) 2003-2005, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __LINUX_PUBLIC_EVTCHN_H__
+#define __LINUX_PUBLIC_EVTCHN_H__
+
+/*
+ * Bind a fresh port to VIRQ @virq.
+ * Return allocated port.
+ */
+#define IOCTL_EVTCHN_BIND_VIRQ				\
+	_IOC(_IOC_NONE, 'E', 0, sizeof(struct ioctl_evtchn_bind_virq))
+struct ioctl_evtchn_bind_virq {
+	unsigned int virq;
+};
+
+/*
+ * Bind a fresh port to remote <@remote_domain, @remote_port>.
+ * Return allocated port.
+ */
+#define IOCTL_EVTCHN_BIND_INTERDOMAIN			\
+	_IOC(_IOC_NONE, 'E', 1, sizeof(struct ioctl_evtchn_bind_interdomain))
+struct ioctl_evtchn_bind_interdomain {
+	unsigned int remote_domain, remote_port;
+};
+
+/*
+ * Allocate a fresh port for binding to @remote_domain.
+ * Return allocated port.
+ */
+#define IOCTL_EVTCHN_BIND_UNBOUND_PORT			\
+	_IOC(_IOC_NONE, 'E', 2, sizeof(struct ioctl_evtchn_bind_unbound_port))
+struct ioctl_evtchn_bind_unbound_port {
+	unsigned int remote_domain;
+};
+
+/*
+ * Unbind previously allocated @port.
+ */
+#define IOCTL_EVTCHN_UNBIND				\
+	_IOC(_IOC_NONE, 'E', 3, sizeof(struct ioctl_evtchn_unbind))
+struct ioctl_evtchn_unbind {
+	unsigned int port;
+};
+
+/*
+ * Unbind previously allocated @port.
+ */
+#define IOCTL_EVTCHN_NOTIFY				\
+	_IOC(_IOC_NONE, 'E', 4, sizeof(struct ioctl_evtchn_notify))
+struct ioctl_evtchn_notify {
+	unsigned int port;
+};
+
+/* Clear and reinitialise the event buffer. Clear error condition. */
+#define IOCTL_EVTCHN_RESET				\
+	_IOC(_IOC_NONE, 'E', 5, 0)
+
+#endif /* __LINUX_PUBLIC_EVTCHN_H__ */
diff --git a/include/xen/interface/version.h b/include/xen/interface/version.h
index 453235e923f..e8b6519d47e 100644
--- a/include/xen/interface/version.h
+++ b/include/xen/interface/version.h
@@ -57,4 +57,7 @@ struct xen_feature_info {
 /* Declares the features reported by XENVER_get_features. */
 #include "features.h"
 
+/* arg == NULL; returns host memory page size. */
+#define XENVER_pagesize 7
+
 #endif /* __XEN_PUBLIC_VERSION_H__ */
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
index f87f9614844..b9763badbd7 100644
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -91,8 +91,7 @@ struct xenbus_driver {
 	void (*otherend_changed)(struct xenbus_device *dev,
 				 enum xenbus_state backend_state);
 	int (*remove)(struct xenbus_device *dev);
-	int (*suspend)(struct xenbus_device *dev);
-	int (*suspend_cancel)(struct xenbus_device *dev);
+	int (*suspend)(struct xenbus_device *dev, pm_message_t state);
 	int (*resume)(struct xenbus_device *dev);
 	int (*uevent)(struct xenbus_device *, char **, int, char *, int);
 	struct device_driver driver;
diff --git a/init/Kconfig b/init/Kconfig
index 7be4d383674..d3a50967c33 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -302,13 +302,14 @@ config AUDITSYSCALL
 
 config AUDIT_TREE
 	def_bool y
-	depends on AUDITSYSCALL && INOTIFY
+	depends on AUDITSYSCALL
+	select INOTIFY
 
 menu "RCU Subsystem"
 
 choice
 	prompt "RCU Implementation"
-	default CLASSIC_RCU
+	default TREE_RCU
 
 config CLASSIC_RCU
 	bool "Classic RCU"
@@ -933,6 +934,42 @@ config AIO
           by some high performance threaded applications. Disabling
           this option saves about 7k.
 
+config HAVE_PERF_COUNTERS
+	bool
+	help
+	  See tools/perf/design.txt for details.
+
+menu "Performance Counters"
+
+config PERF_COUNTERS
+	bool "Kernel Performance Counters"
+	depends on HAVE_PERF_COUNTERS
+	select ANON_INODES
+	help
+	  Enable kernel support for performance counter hardware.
+
+	  Performance counters are special hardware registers available
+	  on most modern CPUs. These registers count the number of certain
+	  types of hw events: such as instructions executed, cachemisses
+	  suffered, or branches mis-predicted - without slowing down the
+	  kernel or applications. These registers can also trigger interrupts
+	  when a threshold number of events have passed - and can thus be
+	  used to profile the code that runs on that CPU.
+
+	  The Linux Performance Counter subsystem provides an abstraction of
+	  these hardware capabilities, available via a system call. It
+	  provides per task and per CPU counters, and it provides event
+	  capabilities on top of those.
+
+	  Say Y if unsure.
+
+config EVENT_PROFILE
+	bool "Tracepoint profile sources"
+	depends on PERF_COUNTERS && EVENT_TRACER
+	default y
+
+endmenu
+
 config VM_EVENT_COUNTERS
 	default y
 	bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
diff --git a/init/main.c b/init/main.c
index 3bbf93be744..f6204f712e7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -56,6 +56,7 @@
 #include <linux/debug_locks.h>
 #include <linux/debugobjects.h>
 #include <linux/lockdep.h>
+#include <linux/kmemleak.h>
 #include <linux/pid_namespace.h>
 #include <linux/device.h>
 #include <linux/kthread.h>
@@ -64,6 +65,7 @@
 #include <linux/idr.h>
 #include <linux/ftrace.h>
 #include <linux/async.h>
+#include <linux/kmemtrace.h>
 #include <trace/boot.h>
 
 #include <asm/io.h>
@@ -71,7 +73,6 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/cacheflush.h>
-#include <trace/kmemtrace.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/smp.h>
@@ -533,6 +534,21 @@ void __init __weak thread_info_cache_init(void)
 {
 }
 
+/*
+ * Set up kernel memory allocators
+ */
+static void __init mm_init(void)
+{
+	/*
+	 * page_cgroup requires countinous pages as memmap
+	 * and it's bigger than MAX_ORDER unless SPARSEMEM.
+	 */
+	page_cgroup_init_flatmem();
+	mem_init();
+	kmem_cache_init();
+	vmalloc_init();
+}
+
 asmlinkage void __init start_kernel(void)
 {
 	char * command_line;
@@ -566,8 +582,7 @@ asmlinkage void __init start_kernel(void)
 	tick_init();
 	boot_cpu_init();
 	page_address_init();
-	printk(KERN_NOTICE);
-	printk(linux_banner);
+	printk(KERN_NOTICE "%s", linux_banner);
 	setup_arch(&command_line);
 	mm_init_owner(&init_mm, &init_task);
 	setup_command_line(command_line);
@@ -575,6 +590,23 @@ asmlinkage void __init start_kernel(void)
 	setup_nr_cpu_ids();
 	smp_prepare_boot_cpu();	/* arch-specific boot-cpu hooks */
 
+	build_all_zonelists();
+	page_alloc_init();
+
+	printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
+	parse_early_param();
+	parse_args("Booting kernel", static_command_line, __start___param,
+		   __stop___param - __start___param,
+		   &unknown_bootoption);
+	/*
+	 * These use large bootmem allocations and must precede
+	 * kmem_cache_init()
+	 */
+	pidhash_init();
+	vfs_caches_init_early();
+	sort_main_extable();
+	trap_init();
+	mm_init();
 	/*
 	 * Set up the scheduler prior starting any interrupts (such as the
 	 * timer interrupt). Full topology setup happens at smp_init()
@@ -586,25 +618,16 @@ asmlinkage void __init start_kernel(void)
 	 * fragile until we cpu_idle() for the first time.
 	 */
 	preempt_disable();
-	build_all_zonelists();
-	page_alloc_init();
-	printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
-	parse_early_param();
-	parse_args("Booting kernel", static_command_line, __start___param,
-		   __stop___param - __start___param,
-		   &unknown_bootoption);
 	if (!irqs_disabled()) {
 		printk(KERN_WARNING "start_kernel(): bug: interrupts were "
 				"enabled *very* early, fixing it\n");
 		local_irq_disable();
 	}
-	sort_main_extable();
-	trap_init();
 	rcu_init();
 	/* init some links before init_ISA_irqs() */
 	early_irq_init();
 	init_IRQ();
-	pidhash_init();
+	prio_tree_init();
 	init_timers();
 	hrtimers_init();
 	softirq_init();
@@ -617,6 +640,7 @@ asmlinkage void __init start_kernel(void)
 				 "enabled early\n");
 	early_boot_irqs_on();
 	local_irq_enable();
+	kmem_cache_init_late();
 
 	/*
 	 * HACK ALERT! This is early. We're enabling the console before
@@ -646,15 +670,12 @@ asmlinkage void __init start_kernel(void)
 		initrd_start = 0;
 	}
 #endif
-	vmalloc_init();
-	vfs_caches_init_early();
 	cpuset_init_early();
 	page_cgroup_init();
-	mem_init();
 	enable_debug_pagealloc();
 	cpu_hotplug_init();
-	kmem_cache_init();
 	kmemtrace_init();
+	kmemleak_init();
 	debug_objects_mem_init();
 	idr_init_cache();
 	setup_per_cpu_pageset();
@@ -664,7 +685,6 @@ asmlinkage void __init start_kernel(void)
 	calibrate_delay();
 	pidmap_init();
 	pgtable_cache_init();
-	prio_tree_init();
 	anon_vma_init();
 #ifdef CONFIG_X86
 	if (efi_enabled)
diff --git a/ipc/sem.c b/ipc/sem.c
index 16a2189e96f..87c2b641fd7 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1290,8 +1290,8 @@ void exit_sem(struct task_struct *tsk)
 		int i;
 
 		rcu_read_lock();
-		un = list_entry(rcu_dereference(ulp->list_proc.next),
-					struct sem_undo, list_proc);
+		un = list_entry_rcu(ulp->list_proc.next,
+				    struct sem_undo, list_proc);
 		if (&un->list_proc == &ulp->list_proc)
 			semid = -1;
 		 else
diff --git a/ipc/shm.c b/ipc/shm.c
index faa46da99eb..15dd238e533 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -384,7 +384,6 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
 	error = PTR_ERR(file);
 	if (IS_ERR(file))
 		goto no_file;
-	ima_shm_check(file);
 
 	id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
 	if (id < 0) {
@@ -891,7 +890,7 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr)
 	file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations);
 	if (!file)
 		goto out_free;
-	ima_shm_check(file);
+	ima_counts_get(file);
 
 	file->private_data = sfd;
 	file->f_mapping = shp->shm_file->f_mapping;
@@ -969,10 +968,13 @@ SYSCALL_DEFINE3(shmat, int, shmid, char __user *, shmaddr, int, shmflg)
 SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
 {
 	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma, *next;
+	struct vm_area_struct *vma;
 	unsigned long addr = (unsigned long)shmaddr;
-	loff_t size = 0;
 	int retval = -EINVAL;
+#ifdef CONFIG_MMU
+	loff_t size = 0;
+	struct vm_area_struct *next;
+#endif
 
 	if (addr & ~PAGE_MASK)
 		return retval;
diff --git a/kernel/Makefile b/kernel/Makefile
index 42423665660..90b53f6dc22 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -93,8 +93,10 @@ obj-$(CONFIG_LATENCYTOP) += latencytop.o
 obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
 obj-$(CONFIG_FUNCTION_TRACER) += trace/
 obj-$(CONFIG_TRACING) += trace/
+obj-$(CONFIG_X86_DS) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
+obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
 
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff --git a/kernel/async.c b/kernel/async.c
index 968ef9457d4..27235f5de19 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -92,19 +92,18 @@ extern int initcall_debug;
 static async_cookie_t  __lowest_in_progress(struct list_head *running)
 {
 	struct async_entry *entry;
+
 	if (!list_empty(running)) {
 		entry = list_first_entry(running,
 			struct async_entry, list);
 		return entry->cookie;
-	} else if (!list_empty(&async_pending)) {
-		entry = list_first_entry(&async_pending,
-			struct async_entry, list);
-		return entry->cookie;
-	} else {
-		/* nothing in progress... next_cookie is "infinity" */
-		return next_cookie;
 	}
 
+	list_for_each_entry(entry, &async_pending, list)
+		if (entry->running == running)
+			return entry->cookie;
+
+	return next_cookie;	/* "infinity" value */
 }
 
 static async_cookie_t  lowest_in_progress(struct list_head *running)
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 6e7351739a8..1f6396d7668 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -568,7 +568,7 @@ void audit_trim_trees(void)
 		if (err)
 			goto skip_it;
 
-		root_mnt = collect_mounts(path.mnt, path.dentry);
+		root_mnt = collect_mounts(&path);
 		path_put(&path);
 		if (!root_mnt)
 			goto skip_it;
@@ -660,7 +660,7 @@ int audit_add_tree_rule(struct audit_krule *rule)
 	err = kern_path(tree->pathname, 0, &path);
 	if (err)
 		goto Err;
-	mnt = collect_mounts(path.mnt, path.dentry);
+	mnt = collect_mounts(&path);
 	path_put(&path);
 	if (!mnt) {
 		err = -ENOMEM;
@@ -720,7 +720,7 @@ int audit_tag_tree(char *old, char *new)
 	err = kern_path(new, 0, &path);
 	if (err)
 		return err;
-	tagged = collect_mounts(path.mnt, path.dentry);
+	tagged = collect_mounts(&path);
 	path_put(&path);
 	if (!tagged)
 		return -ENOMEM;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index a7267bfd376..3fb789f6df9 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -46,6 +46,7 @@
 #include <linux/cgroupstats.h>
 #include <linux/hash.h>
 #include <linux/namei.h>
+#include <linux/smp_lock.h>
 
 #include <asm/atomic.h>
 
@@ -900,6 +901,7 @@ static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 	struct cgroup *cgrp = &root->top_cgroup;
 	struct cgroup_sb_opts opts;
 
+	lock_kernel();
 	mutex_lock(&cgrp->dentry->d_inode->i_mutex);
 	mutex_lock(&cgroup_mutex);
 
@@ -927,6 +929,7 @@ static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 	kfree(opts.release_agent);
 	mutex_unlock(&cgroup_mutex);
 	mutex_unlock(&cgrp->dentry->d_inode->i_mutex);
+	unlock_kernel();
 	return ret;
 }
 
diff --git a/kernel/compat.c b/kernel/compat.c
index 42d56544460..f6c204f07ea 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -882,6 +882,17 @@ compat_sys_rt_sigtimedwait (compat_sigset_t __user *uthese,
 
 }
 
+asmlinkage long
+compat_sys_rt_tgsigqueueinfo(compat_pid_t tgid, compat_pid_t pid, int sig,
+			     struct compat_siginfo __user *uinfo)
+{
+	siginfo_t info;
+
+	if (copy_siginfo_from_user32(&info, uinfo))
+		return -EFAULT;
+	return do_rt_tgsigqueueinfo(tgid, pid, sig, &info);
+}
+
 #ifdef __ARCH_WANT_COMPAT_SYS_TIME
 
 /* compat_time_t is a 32 bit "long" and needs to get converted. */
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 026faccca86..d5a7e17474e 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1857,7 +1857,7 @@ struct cgroup_subsys cpuset_subsys = {
 
 int __init cpuset_init_early(void)
 {
-	alloc_bootmem_cpumask_var(&top_cpuset.cpus_allowed);
+	alloc_cpumask_var(&top_cpuset.cpus_allowed, GFP_NOWAIT);
 
 	top_cpuset.mems_generation = cpuset_mems_generation++;
 	return 0;
diff --git a/kernel/cred.c b/kernel/cred.c
index 3a039189d70..1bb4d7e5d61 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -167,7 +167,7 @@ EXPORT_SYMBOL(prepare_creds);
 
 /*
  * Prepare credentials for current to perform an execve()
- * - The caller must hold current->cred_exec_mutex
+ * - The caller must hold current->cred_guard_mutex
  */
 struct cred *prepare_exec_creds(void)
 {
@@ -276,7 +276,7 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags)
 	struct cred *new;
 	int ret;
 
-	mutex_init(&p->cred_exec_mutex);
+	mutex_init(&p->cred_guard_mutex);
 
 	if (
 #ifdef CONFIG_KEYS
diff --git a/kernel/exit.c b/kernel/exit.c
index abf9cf3b95c..b6c90b5ef50 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -48,7 +48,8 @@
 #include <linux/tracehook.h>
 #include <linux/fs_struct.h>
 #include <linux/init_task.h>
-#include <trace/sched.h>
+#include <linux/perf_counter.h>
+#include <trace/events/sched.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -56,10 +57,6 @@
 #include <asm/mmu_context.h>
 #include "cred-internals.h"
 
-DEFINE_TRACE(sched_process_free);
-DEFINE_TRACE(sched_process_exit);
-DEFINE_TRACE(sched_process_wait);
-
 static void exit_mm(struct task_struct * tsk);
 
 static void __unhash_process(struct task_struct *p)
@@ -158,6 +155,9 @@ static void delayed_put_task_struct(struct rcu_head *rhp)
 {
 	struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
 
+#ifdef CONFIG_PERF_COUNTERS
+	WARN_ON_ONCE(tsk->perf_counter_ctxp);
+#endif
 	trace_sched_process_free(tsk);
 	put_task_struct(tsk);
 }
@@ -174,6 +174,7 @@ repeat:
 	atomic_dec(&__task_cred(p)->user->processes);
 
 	proc_flush_task(p);
+
 	write_lock_irq(&tasklist_lock);
 	tracehook_finish_release_task(p);
 	__exit_signal(p);
@@ -975,16 +976,19 @@ NORET_TYPE void do_exit(long code)
 		module_put(tsk->binfmt->module);
 
 	proc_exit_connector(tsk);
+
+	/*
+	 * Flush inherited counters to the parent - before the parent
+	 * gets woken up by child-exit notifications.
+	 */
+	perf_counter_exit_task(tsk);
+
 	exit_notify(tsk, group_dead);
 #ifdef CONFIG_NUMA
 	mpol_put(tsk->mempolicy);
 	tsk->mempolicy = NULL;
 #endif
 #ifdef CONFIG_FUTEX
-	/*
-	 * This must happen late, after the PID is not
-	 * hashed anymore:
-	 */
 	if (unlikely(!list_empty(&tsk->pi_state_list)))
 		exit_pi_state_list(tsk);
 	if (unlikely(current->pi_state_cache))
@@ -1476,6 +1480,7 @@ static int wait_consider_task(struct task_struct *parent, int ptrace,
 		 */
 		if (*notask_error)
 			*notask_error = ret;
+		return 0;
 	}
 
 	if (likely(!ptrace) && unlikely(p->ptrace)) {
diff --git a/kernel/fork.c b/kernel/fork.c
index b9e2edd0072..4430eb1376f 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -61,8 +61,8 @@
 #include <linux/proc_fs.h>
 #include <linux/blkdev.h>
 #include <linux/fs_struct.h>
-#include <trace/sched.h>
 #include <linux/magic.h>
+#include <linux/perf_counter.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -71,6 +71,8 @@
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 
+#include <trace/events/sched.h>
+
 /*
  * Protected counters by write_lock_irq(&tasklist_lock)
  */
@@ -83,8 +85,6 @@ DEFINE_PER_CPU(unsigned long, process_counts) = 0;
 
 __cacheline_aligned DEFINE_RWLOCK(tasklist_lock);  /* outer */
 
-DEFINE_TRACE(sched_process_fork);
-
 int nr_processes(void)
 {
 	int cpu;
@@ -982,6 +982,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	if (!p)
 		goto fork_out;
 
+	ftrace_graph_init_task(p);
+
 	rt_mutex_init_task(p);
 
 #ifdef CONFIG_PROVE_LOCKING
@@ -1089,12 +1091,16 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 #ifdef CONFIG_DEBUG_MUTEXES
 	p->blocked_on = NULL; /* not blocked yet */
 #endif
-	if (unlikely(current->ptrace))
-		ptrace_fork(p, clone_flags);
+
+	p->bts = NULL;
 
 	/* Perform scheduler related setup. Assign this task to a CPU. */
 	sched_fork(p, clone_flags);
 
+	retval = perf_counter_init_task(p);
+	if (retval)
+		goto bad_fork_cleanup_policy;
+
 	if ((retval = audit_alloc(p)))
 		goto bad_fork_cleanup_policy;
 	/* copy all the process information */
@@ -1131,8 +1137,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 		}
 	}
 
-	ftrace_graph_init_task(p);
-
 	p->pid = pid_nr(pid);
 	p->tgid = p->pid;
 	if (clone_flags & CLONE_THREAD)
@@ -1141,7 +1145,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	if (current->nsproxy != p->nsproxy) {
 		retval = ns_cgroup_clone(p, pid);
 		if (retval)
-			goto bad_fork_free_graph;
+			goto bad_fork_free_pid;
 	}
 
 	p->set_child_tid = (clone_flags & CLONE_CHILD_SETTID) ? child_tidptr : NULL;
@@ -1233,7 +1237,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 		spin_unlock(&current->sighand->siglock);
 		write_unlock_irq(&tasklist_lock);
 		retval = -ERESTARTNOINTR;
-		goto bad_fork_free_graph;
+		goto bad_fork_free_pid;
 	}
 
 	if (clone_flags & CLONE_THREAD) {
@@ -1268,8 +1272,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	cgroup_post_fork(p);
 	return p;
 
-bad_fork_free_graph:
-	ftrace_graph_exit_task(p);
 bad_fork_free_pid:
 	if (pid != &init_struct_pid)
 		free_pid(pid);
@@ -1293,6 +1295,7 @@ bad_fork_cleanup_semundo:
 bad_fork_cleanup_audit:
 	audit_free(p);
 bad_fork_cleanup_policy:
+	perf_counter_free_task(p);
 #ifdef CONFIG_NUMA
 	mpol_put(p->mempolicy);
 bad_fork_cleanup_cgroup:
@@ -1406,10 +1409,16 @@ long do_fork(unsigned long clone_flags,
 		if (clone_flags & CLONE_VFORK) {
 			p->vfork_done = &vfork;
 			init_completion(&vfork);
+		} else if (!(clone_flags & CLONE_VM)) {
+			/*
+			 * vfork will do an exec which will call
+			 * set_task_comm()
+			 */
+			perf_counter_fork(p);
 		}
 
 		audit_finish_fork(p);
-		tracehook_report_clone(trace, regs, clone_flags, nr, p);
+		tracehook_report_clone(regs, clone_flags, nr, p);
 
 		/*
 		 * We set PF_STARTING at creation in case tracing wants to
diff --git a/kernel/futex.c b/kernel/futex.c
index eef8cd26b5e..80b5ce71659 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -19,6 +19,10 @@
  *  PRIVATE futexes by Eric Dumazet
  *  Copyright (C) 2007 Eric Dumazet <dada1@cosmosbay.com>
  *
+ *  Requeue-PI support by Darren Hart <dvhltc@us.ibm.com>
+ *  Copyright (C) IBM Corporation, 2009
+ *  Thanks to Thomas Gleixner for conceptual design and careful reviews.
+ *
  *  Thanks to Ben LaHaise for yelling "hashed waitqueues" loudly
  *  enough at me, Linus for the original (flawed) idea, Matthew
  *  Kirkwood for proof-of-concept implementation.
@@ -96,8 +100,8 @@ struct futex_pi_state {
  */
 struct futex_q {
 	struct plist_node list;
-	/* There can only be a single waiter */
-	wait_queue_head_t waiter;
+	/* Waiter reference */
+	struct task_struct *task;
 
 	/* Which hash list lock to use: */
 	spinlock_t *lock_ptr;
@@ -107,7 +111,9 @@ struct futex_q {
 
 	/* Optional priority inheritance state: */
 	struct futex_pi_state *pi_state;
-	struct task_struct *task;
+
+	/* rt_waiter storage for requeue_pi: */
+	struct rt_mutex_waiter *rt_waiter;
 
 	/* Bitset for the optional bitmasked wakeup */
 	u32 bitset;
@@ -193,6 +199,7 @@ static void drop_futex_key_refs(union futex_key *key)
  * @uaddr: virtual address of the futex
  * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
  * @key: address where result is stored.
+ * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
  *
  * Returns a negative error code or 0
  * The key words are stored in *key on success.
@@ -203,7 +210,8 @@ static void drop_futex_key_refs(union futex_key *key)
  *
  * lock_page() might sleep, the caller should not hold a spinlock.
  */
-static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
+static int
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
 {
 	unsigned long address = (unsigned long)uaddr;
 	struct mm_struct *mm = current->mm;
@@ -226,7 +234,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
 	 *        but access_ok() should be faster than find_vma()
 	 */
 	if (!fshared) {
-		if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
+		if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
 			return -EFAULT;
 		key->private.mm = mm;
 		key->private.address = address;
@@ -235,7 +243,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
 	}
 
 again:
-	err = get_user_pages_fast(address, 1, 0, &page);
+	err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
 	if (err < 0)
 		return err;
 
@@ -276,6 +284,25 @@ void put_futex_key(int fshared, union futex_key *key)
 	drop_futex_key_refs(key);
 }
 
+/**
+ * futex_top_waiter() - Return the highest priority waiter on a futex
+ * @hb:     the hash bucket the futex_q's reside in
+ * @key:    the futex key (to distinguish it from other futex futex_q's)
+ *
+ * Must be called with the hb lock held.
+ */
+static struct futex_q *futex_top_waiter(struct futex_hash_bucket *hb,
+					union futex_key *key)
+{
+	struct futex_q *this;
+
+	plist_for_each_entry(this, &hb->chain, list) {
+		if (match_futex(&this->key, key))
+			return this;
+	}
+	return NULL;
+}
+
 static u32 cmpxchg_futex_value_locked(u32 __user *uaddr, u32 uval, u32 newval)
 {
 	u32 curval;
@@ -537,28 +564,160 @@ lookup_pi_state(u32 uval, struct futex_hash_bucket *hb,
 	return 0;
 }
 
+/**
+ * futex_lock_pi_atomic() - atomic work required to acquire a pi aware futex
+ * @uaddr:		the pi futex user address
+ * @hb:			the pi futex hash bucket
+ * @key:		the futex key associated with uaddr and hb
+ * @ps:			the pi_state pointer where we store the result of the
+ *			lookup
+ * @task:		the task to perform the atomic lock work for.  This will
+ *			be "current" except in the case of requeue pi.
+ * @set_waiters:	force setting the FUTEX_WAITERS bit (1) or not (0)
+ *
+ * Returns:
+ *  0 - ready to wait
+ *  1 - acquired the lock
+ * <0 - error
+ *
+ * The hb->lock and futex_key refs shall be held by the caller.
+ */
+static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb,
+				union futex_key *key,
+				struct futex_pi_state **ps,
+				struct task_struct *task, int set_waiters)
+{
+	int lock_taken, ret, ownerdied = 0;
+	u32 uval, newval, curval;
+
+retry:
+	ret = lock_taken = 0;
+
+	/*
+	 * To avoid races, we attempt to take the lock here again
+	 * (by doing a 0 -> TID atomic cmpxchg), while holding all
+	 * the locks. It will most likely not succeed.
+	 */
+	newval = task_pid_vnr(task);
+	if (set_waiters)
+		newval |= FUTEX_WAITERS;
+
+	curval = cmpxchg_futex_value_locked(uaddr, 0, newval);
+
+	if (unlikely(curval == -EFAULT))
+		return -EFAULT;
+
+	/*
+	 * Detect deadlocks.
+	 */
+	if ((unlikely((curval & FUTEX_TID_MASK) == task_pid_vnr(task))))
+		return -EDEADLK;
+
+	/*
+	 * Surprise - we got the lock. Just return to userspace:
+	 */
+	if (unlikely(!curval))
+		return 1;
+
+	uval = curval;
+
+	/*
+	 * Set the FUTEX_WAITERS flag, so the owner will know it has someone
+	 * to wake at the next unlock.
+	 */
+	newval = curval | FUTEX_WAITERS;
+
+	/*
+	 * There are two cases, where a futex might have no owner (the
+	 * owner TID is 0): OWNER_DIED. We take over the futex in this
+	 * case. We also do an unconditional take over, when the owner
+	 * of the futex died.
+	 *
+	 * This is safe as we are protected by the hash bucket lock !
+	 */
+	if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
+		/* Keep the OWNER_DIED bit */
+		newval = (curval & ~FUTEX_TID_MASK) | task_pid_vnr(task);
+		ownerdied = 0;
+		lock_taken = 1;
+	}
+
+	curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+
+	if (unlikely(curval == -EFAULT))
+		return -EFAULT;
+	if (unlikely(curval != uval))
+		goto retry;
+
+	/*
+	 * We took the lock due to owner died take over.
+	 */
+	if (unlikely(lock_taken))
+		return 1;
+
+	/*
+	 * We dont have the lock. Look up the PI state (or create it if
+	 * we are the first waiter):
+	 */
+	ret = lookup_pi_state(uval, hb, key, ps);
+
+	if (unlikely(ret)) {
+		switch (ret) {
+		case -ESRCH:
+			/*
+			 * No owner found for this futex. Check if the
+			 * OWNER_DIED bit is set to figure out whether
+			 * this is a robust futex or not.
+			 */
+			if (get_futex_value_locked(&curval, uaddr))
+				return -EFAULT;
+
+			/*
+			 * We simply start over in case of a robust
+			 * futex. The code above will take the futex
+			 * and return happy.
+			 */
+			if (curval & FUTEX_OWNER_DIED) {
+				ownerdied = 1;
+				goto retry;
+			}
+		default:
+			break;
+		}
+	}
+
+	return ret;
+}
+
 /*
  * The hash bucket lock must be held when this is called.
  * Afterwards, the futex_q must not be accessed.
  */
 static void wake_futex(struct futex_q *q)
 {
-	plist_del(&q->list, &q->list.plist);
+	struct task_struct *p = q->task;
+
 	/*
-	 * The lock in wake_up_all() is a crucial memory barrier after the
-	 * plist_del() and also before assigning to q->lock_ptr.
+	 * We set q->lock_ptr = NULL _before_ we wake up the task. If
+	 * a non futex wake up happens on another CPU then the task
+	 * might exit and p would dereference a non existing task
+	 * struct. Prevent this by holding a reference on p across the
+	 * wake up.
 	 */
-	wake_up(&q->waiter);
+	get_task_struct(p);
+
+	plist_del(&q->list, &q->list.plist);
 	/*
-	 * The waiting task can free the futex_q as soon as this is written,
-	 * without taking any locks.  This must come last.
-	 *
-	 * A memory barrier is required here to prevent the following store to
-	 * lock_ptr from getting ahead of the wakeup. Clearing the lock at the
-	 * end of wake_up() does not prevent this store from moving.
+	 * The waiting task can free the futex_q as soon as
+	 * q->lock_ptr = NULL is written, without taking any locks. A
+	 * memory barrier is required here to prevent the following
+	 * store to lock_ptr from getting ahead of the plist_del.
 	 */
 	smp_wmb();
 	q->lock_ptr = NULL;
+
+	wake_up_state(p, TASK_NORMAL);
+	put_task_struct(p);
 }
 
 static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this)
@@ -677,7 +836,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
 	if (!bitset)
 		return -EINVAL;
 
-	ret = get_futex_key(uaddr, fshared, &key);
+	ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -687,7 +846,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
 
 	plist_for_each_entry_safe(this, next, head, list) {
 		if (match_futex (&this->key, &key)) {
-			if (this->pi_state) {
+			if (this->pi_state || this->rt_waiter) {
 				ret = -EINVAL;
 				break;
 			}
@@ -723,10 +882,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
 	int ret, op_ret;
 
 retry:
-	ret = get_futex_key(uaddr1, fshared, &key1);
+	ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -800,24 +959,185 @@ out:
 	return ret;
 }
 
-/*
- * Requeue all waiters hashed on one physical page to another
- * physical page.
+/**
+ * requeue_futex() - Requeue a futex_q from one hb to another
+ * @q:		the futex_q to requeue
+ * @hb1:	the source hash_bucket
+ * @hb2:	the target hash_bucket
+ * @key2:	the new key for the requeued futex_q
+ */
+static inline
+void requeue_futex(struct futex_q *q, struct futex_hash_bucket *hb1,
+		   struct futex_hash_bucket *hb2, union futex_key *key2)
+{
+
+	/*
+	 * If key1 and key2 hash to the same bucket, no need to
+	 * requeue.
+	 */
+	if (likely(&hb1->chain != &hb2->chain)) {
+		plist_del(&q->list, &hb1->chain);
+		plist_add(&q->list, &hb2->chain);
+		q->lock_ptr = &hb2->lock;
+#ifdef CONFIG_DEBUG_PI_LIST
+		q->list.plist.lock = &hb2->lock;
+#endif
+	}
+	get_futex_key_refs(key2);
+	q->key = *key2;
+}
+
+/**
+ * requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
+ * q:	the futex_q
+ * key:	the key of the requeue target futex
+ *
+ * During futex_requeue, with requeue_pi=1, it is possible to acquire the
+ * target futex if it is uncontended or via a lock steal.  Set the futex_q key
+ * to the requeue target futex so the waiter can detect the wakeup on the right
+ * futex, but remove it from the hb and NULL the rt_waiter so it can detect
+ * atomic lock acquisition.  Must be called with the q->lock_ptr held.
+ */
+static inline
+void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key)
+{
+	drop_futex_key_refs(&q->key);
+	get_futex_key_refs(key);
+	q->key = *key;
+
+	WARN_ON(plist_node_empty(&q->list));
+	plist_del(&q->list, &q->list.plist);
+
+	WARN_ON(!q->rt_waiter);
+	q->rt_waiter = NULL;
+
+	wake_up_state(q->task, TASK_NORMAL);
+}
+
+/**
+ * futex_proxy_trylock_atomic() - Attempt an atomic lock for the top waiter
+ * @pifutex:		the user address of the to futex
+ * @hb1:		the from futex hash bucket, must be locked by the caller
+ * @hb2:		the to futex hash bucket, must be locked by the caller
+ * @key1:		the from futex key
+ * @key2:		the to futex key
+ * @ps:			address to store the pi_state pointer
+ * @set_waiters:	force setting the FUTEX_WAITERS bit (1) or not (0)
+ *
+ * Try and get the lock on behalf of the top waiter if we can do it atomically.
+ * Wake the top waiter if we succeed.  If the caller specified set_waiters,
+ * then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit.
+ * hb1 and hb2 must be held by the caller.
+ *
+ * Returns:
+ *  0 - failed to acquire the lock atomicly
+ *  1 - acquired the lock
+ * <0 - error
+ */
+static int futex_proxy_trylock_atomic(u32 __user *pifutex,
+				 struct futex_hash_bucket *hb1,
+				 struct futex_hash_bucket *hb2,
+				 union futex_key *key1, union futex_key *key2,
+				 struct futex_pi_state **ps, int set_waiters)
+{
+	struct futex_q *top_waiter = NULL;
+	u32 curval;
+	int ret;
+
+	if (get_futex_value_locked(&curval, pifutex))
+		return -EFAULT;
+
+	/*
+	 * Find the top_waiter and determine if there are additional waiters.
+	 * If the caller intends to requeue more than 1 waiter to pifutex,
+	 * force futex_lock_pi_atomic() to set the FUTEX_WAITERS bit now,
+	 * as we have means to handle the possible fault.  If not, don't set
+	 * the bit unecessarily as it will force the subsequent unlock to enter
+	 * the kernel.
+	 */
+	top_waiter = futex_top_waiter(hb1, key1);
+
+	/* There are no waiters, nothing for us to do. */
+	if (!top_waiter)
+		return 0;
+
+	/*
+	 * Try to take the lock for top_waiter.  Set the FUTEX_WAITERS bit in
+	 * the contended case or if set_waiters is 1.  The pi_state is returned
+	 * in ps in contended cases.
+	 */
+	ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task,
+				   set_waiters);
+	if (ret == 1)
+		requeue_pi_wake_futex(top_waiter, key2);
+
+	return ret;
+}
+
+/**
+ * futex_requeue() - Requeue waiters from uaddr1 to uaddr2
+ * uaddr1:	source futex user address
+ * uaddr2:	target futex user address
+ * nr_wake:	number of waiters to wake (must be 1 for requeue_pi)
+ * nr_requeue:	number of waiters to requeue (0-INT_MAX)
+ * requeue_pi:	if we are attempting to requeue from a non-pi futex to a
+ * 		pi futex (pi to pi requeue is not supported)
+ *
+ * Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire
+ * uaddr2 atomically on behalf of the top waiter.
+ *
+ * Returns:
+ * >=0 - on success, the number of tasks requeued or woken
+ *  <0 - on error
  */
 static int futex_requeue(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
-			 int nr_wake, int nr_requeue, u32 *cmpval)
+			 int nr_wake, int nr_requeue, u32 *cmpval,
+			 int requeue_pi)
 {
 	union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT;
+	int drop_count = 0, task_count = 0, ret;
+	struct futex_pi_state *pi_state = NULL;
 	struct futex_hash_bucket *hb1, *hb2;
 	struct plist_head *head1;
 	struct futex_q *this, *next;
-	int ret, drop_count = 0;
+	u32 curval2;
+
+	if (requeue_pi) {
+		/*
+		 * requeue_pi requires a pi_state, try to allocate it now
+		 * without any locks in case it fails.
+		 */
+		if (refill_pi_state_cache())
+			return -ENOMEM;
+		/*
+		 * requeue_pi must wake as many tasks as it can, up to nr_wake
+		 * + nr_requeue, since it acquires the rt_mutex prior to
+		 * returning to userspace, so as to not leave the rt_mutex with
+		 * waiters and no owner.  However, second and third wake-ups
+		 * cannot be predicted as they involve race conditions with the
+		 * first wake and a fault while looking up the pi_state.  Both
+		 * pthread_cond_signal() and pthread_cond_broadcast() should
+		 * use nr_wake=1.
+		 */
+		if (nr_wake != 1)
+			return -EINVAL;
+	}
 
 retry:
-	ret = get_futex_key(uaddr1, fshared, &key1);
+	if (pi_state != NULL) {
+		/*
+		 * We will have to lookup the pi_state again, so free this one
+		 * to keep the accounting correct.
+		 */
+		free_pi_state(pi_state);
+		pi_state = NULL;
+	}
+
+	ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, fshared, &key2,
+			    requeue_pi ? VERIFY_WRITE : VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -852,32 +1172,99 @@ retry_private:
 		}
 	}
 
+	if (requeue_pi && (task_count - nr_wake < nr_requeue)) {
+		/*
+		 * Attempt to acquire uaddr2 and wake the top waiter. If we
+		 * intend to requeue waiters, force setting the FUTEX_WAITERS
+		 * bit.  We force this here where we are able to easily handle
+		 * faults rather in the requeue loop below.
+		 */
+		ret = futex_proxy_trylock_atomic(uaddr2, hb1, hb2, &key1,
+						 &key2, &pi_state, nr_requeue);
+
+		/*
+		 * At this point the top_waiter has either taken uaddr2 or is
+		 * waiting on it.  If the former, then the pi_state will not
+		 * exist yet, look it up one more time to ensure we have a
+		 * reference to it.
+		 */
+		if (ret == 1) {
+			WARN_ON(pi_state);
+			task_count++;
+			ret = get_futex_value_locked(&curval2, uaddr2);
+			if (!ret)
+				ret = lookup_pi_state(curval2, hb2, &key2,
+						      &pi_state);
+		}
+
+		switch (ret) {
+		case 0:
+			break;
+		case -EFAULT:
+			double_unlock_hb(hb1, hb2);
+			put_futex_key(fshared, &key2);
+			put_futex_key(fshared, &key1);
+			ret = get_user(curval2, uaddr2);
+			if (!ret)
+				goto retry;
+			goto out;
+		case -EAGAIN:
+			/* The owner was exiting, try again. */
+			double_unlock_hb(hb1, hb2);
+			put_futex_key(fshared, &key2);
+			put_futex_key(fshared, &key1);
+			cond_resched();
+			goto retry;
+		default:
+			goto out_unlock;
+		}
+	}
+
 	head1 = &hb1->chain;
 	plist_for_each_entry_safe(this, next, head1, list) {
-		if (!match_futex (&this->key, &key1))
+		if (task_count - nr_wake >= nr_requeue)
+			break;
+
+		if (!match_futex(&this->key, &key1))
 			continue;
-		if (++ret <= nr_wake) {
+
+		WARN_ON(!requeue_pi && this->rt_waiter);
+		WARN_ON(requeue_pi && !this->rt_waiter);
+
+		/*
+		 * Wake nr_wake waiters.  For requeue_pi, if we acquired the
+		 * lock, we already woke the top_waiter.  If not, it will be
+		 * woken by futex_unlock_pi().
+		 */
+		if (++task_count <= nr_wake && !requeue_pi) {
 			wake_futex(this);
-		} else {
-			/*
-			 * If key1 and key2 hash to the same bucket, no need to
-			 * requeue.
-			 */
-			if (likely(head1 != &hb2->chain)) {
-				plist_del(&this->list, &hb1->chain);
-				plist_add(&this->list, &hb2->chain);
-				this->lock_ptr = &hb2->lock;
-#ifdef CONFIG_DEBUG_PI_LIST
-				this->list.plist.lock = &hb2->lock;
-#endif
-			}
-			this->key = key2;
-			get_futex_key_refs(&key2);
-			drop_count++;
+			continue;
+		}
 
-			if (ret - nr_wake >= nr_requeue)
-				break;
+		/*
+		 * Requeue nr_requeue waiters and possibly one more in the case
+		 * of requeue_pi if we couldn't acquire the lock atomically.
+		 */
+		if (requeue_pi) {
+			/* Prepare the waiter to take the rt_mutex. */
+			atomic_inc(&pi_state->refcount);
+			this->pi_state = pi_state;
+			ret = rt_mutex_start_proxy_lock(&pi_state->pi_mutex,
+							this->rt_waiter,
+							this->task, 1);
+			if (ret == 1) {
+				/* We got the lock. */
+				requeue_pi_wake_futex(this, &key2);
+				continue;
+			} else if (ret) {
+				/* -EDEADLK */
+				this->pi_state = NULL;
+				free_pi_state(pi_state);
+				goto out_unlock;
+			}
 		}
+		requeue_futex(this, hb1, hb2, &key2);
+		drop_count++;
 	}
 
 out_unlock:
@@ -897,7 +1284,9 @@ out_put_keys:
 out_put_key1:
 	put_futex_key(fshared, &key1);
 out:
-	return ret;
+	if (pi_state != NULL)
+		free_pi_state(pi_state);
+	return ret ? ret : task_count;
 }
 
 /* The key must be already stored in q->key. */
@@ -905,8 +1294,6 @@ static inline struct futex_hash_bucket *queue_lock(struct futex_q *q)
 {
 	struct futex_hash_bucket *hb;
 
-	init_waitqueue_head(&q->waiter);
-
 	get_futex_key_refs(&q->key);
 	hb = hash_futex(&q->key);
 	q->lock_ptr = &hb->lock;
@@ -1117,35 +1504,149 @@ handle_fault:
  */
 #define FLAGS_SHARED		0x01
 #define FLAGS_CLOCKRT		0x02
+#define FLAGS_HAS_TIMEOUT	0x04
 
 static long futex_wait_restart(struct restart_block *restart);
 
-static int futex_wait(u32 __user *uaddr, int fshared,
-		      u32 val, ktime_t *abs_time, u32 bitset, int clockrt)
+/**
+ * fixup_owner() - Post lock pi_state and corner case management
+ * @uaddr:	user address of the futex
+ * @fshared:	whether the futex is shared (1) or not (0)
+ * @q:		futex_q (contains pi_state and access to the rt_mutex)
+ * @locked:	if the attempt to take the rt_mutex succeeded (1) or not (0)
+ *
+ * After attempting to lock an rt_mutex, this function is called to cleanup
+ * the pi_state owner as well as handle race conditions that may allow us to
+ * acquire the lock. Must be called with the hb lock held.
+ *
+ * Returns:
+ *  1 - success, lock taken
+ *  0 - success, lock not taken
+ * <0 - on error (-EFAULT)
+ */
+static int fixup_owner(u32 __user *uaddr, int fshared, struct futex_q *q,
+		       int locked)
 {
-	struct task_struct *curr = current;
-	struct restart_block *restart;
-	DECLARE_WAITQUEUE(wait, curr);
-	struct futex_hash_bucket *hb;
-	struct futex_q q;
-	u32 uval;
-	int ret;
-	struct hrtimer_sleeper t;
-	int rem = 0;
+	struct task_struct *owner;
+	int ret = 0;
 
-	if (!bitset)
-		return -EINVAL;
+	if (locked) {
+		/*
+		 * Got the lock. We might not be the anticipated owner if we
+		 * did a lock-steal - fix up the PI-state in that case:
+		 */
+		if (q->pi_state->owner != current)
+			ret = fixup_pi_state_owner(uaddr, q, current, fshared);
+		goto out;
+	}
 
-	q.pi_state = NULL;
-	q.bitset = bitset;
-retry:
-	q.key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q.key);
-	if (unlikely(ret != 0))
+	/*
+	 * Catch the rare case, where the lock was released when we were on the
+	 * way back before we locked the hash bucket.
+	 */
+	if (q->pi_state->owner == current) {
+		/*
+		 * Try to get the rt_mutex now. This might fail as some other
+		 * task acquired the rt_mutex after we removed ourself from the
+		 * rt_mutex waiters list.
+		 */
+		if (rt_mutex_trylock(&q->pi_state->pi_mutex)) {
+			locked = 1;
+			goto out;
+		}
+
+		/*
+		 * pi_state is incorrect, some other task did a lock steal and
+		 * we returned due to timeout or signal without taking the
+		 * rt_mutex. Too late. We can access the rt_mutex_owner without
+		 * locking, as the other task is now blocked on the hash bucket
+		 * lock. Fix the state up.
+		 */
+		owner = rt_mutex_owner(&q->pi_state->pi_mutex);
+		ret = fixup_pi_state_owner(uaddr, q, owner, fshared);
 		goto out;
+	}
 
-retry_private:
-	hb = queue_lock(&q);
+	/*
+	 * Paranoia check. If we did not take the lock, then we should not be
+	 * the owner, nor the pending owner, of the rt_mutex.
+	 */
+	if (rt_mutex_owner(&q->pi_state->pi_mutex) == current)
+		printk(KERN_ERR "fixup_owner: ret = %d pi-mutex: %p "
+				"pi-state %p\n", ret,
+				q->pi_state->pi_mutex.owner,
+				q->pi_state->owner);
+
+out:
+	return ret ? ret : locked;
+}
+
+/**
+ * futex_wait_queue_me() - queue_me() and wait for wakeup, timeout, or signal
+ * @hb:		the futex hash bucket, must be locked by the caller
+ * @q:		the futex_q to queue up on
+ * @timeout:	the prepared hrtimer_sleeper, or null for no timeout
+ */
+static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
+				struct hrtimer_sleeper *timeout)
+{
+	queue_me(q, hb);
+
+	/*
+	 * There might have been scheduling since the queue_me(), as we
+	 * cannot hold a spinlock across the get_user() in case it
+	 * faults, and we cannot just set TASK_INTERRUPTIBLE state when
+	 * queueing ourselves into the futex hash. This code thus has to
+	 * rely on the futex_wake() code removing us from hash when it
+	 * wakes us up.
+	 */
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	/* Arm the timer */
+	if (timeout) {
+		hrtimer_start_expires(&timeout->timer, HRTIMER_MODE_ABS);
+		if (!hrtimer_active(&timeout->timer))
+			timeout->task = NULL;
+	}
+
+	/*
+	 * !plist_node_empty() is safe here without any lock.
+	 * q.lock_ptr != 0 is not safe, because of ordering against wakeup.
+	 */
+	if (likely(!plist_node_empty(&q->list))) {
+		/*
+		 * If the timer has already expired, current will already be
+		 * flagged for rescheduling. Only call schedule if there
+		 * is no timeout, or if it has yet to expire.
+		 */
+		if (!timeout || timeout->task)
+			schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+}
+
+/**
+ * futex_wait_setup() - Prepare to wait on a futex
+ * @uaddr:	the futex userspace address
+ * @val:	the expected value
+ * @fshared:	whether the futex is shared (1) or not (0)
+ * @q:		the associated futex_q
+ * @hb:		storage for hash_bucket pointer to be returned to caller
+ *
+ * Setup the futex_q and locate the hash_bucket.  Get the futex value and
+ * compare it with the expected value.  Handle atomic faults internally.
+ * Return with the hb lock held and a q.key reference on success, and unlocked
+ * with no q.key reference on failure.
+ *
+ * Returns:
+ *  0 - uaddr contains val and hb has been locked
+ * <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlcoked
+ */
+static int futex_wait_setup(u32 __user *uaddr, u32 val, int fshared,
+			   struct futex_q *q, struct futex_hash_bucket **hb)
+{
+	u32 uval;
+	int ret;
 
 	/*
 	 * Access the page AFTER the hash-bucket is locked.
@@ -1163,95 +1664,83 @@ retry_private:
 	 * A consequence is that futex_wait() can return zero and absorb
 	 * a wakeup when *uaddr != val on entry to the syscall.  This is
 	 * rare, but normal.
-	 *
-	 * For shared futexes, we hold the mmap semaphore, so the mapping
-	 * cannot have changed since we looked it up in get_futex_key.
 	 */
+retry:
+	q->key = FUTEX_KEY_INIT;
+	ret = get_futex_key(uaddr, fshared, &q->key, VERIFY_READ);
+	if (unlikely(ret != 0))
+		return ret;
+
+retry_private:
+	*hb = queue_lock(q);
+
 	ret = get_futex_value_locked(&uval, uaddr);
 
-	if (unlikely(ret)) {
-		queue_unlock(&q, hb);
+	if (ret) {
+		queue_unlock(q, *hb);
 
 		ret = get_user(uval, uaddr);
 		if (ret)
-			goto out_put_key;
+			goto out;
 
 		if (!fshared)
 			goto retry_private;
 
-		put_futex_key(fshared, &q.key);
+		put_futex_key(fshared, &q->key);
 		goto retry;
 	}
-	ret = -EWOULDBLOCK;
-	if (unlikely(uval != val)) {
-		queue_unlock(&q, hb);
-		goto out_put_key;
-	}
 
-	/* Only actually queue if *uaddr contained val.  */
-	queue_me(&q, hb);
+	if (uval != val) {
+		queue_unlock(q, *hb);
+		ret = -EWOULDBLOCK;
+	}
 
-	/*
-	 * There might have been scheduling since the queue_me(), as we
-	 * cannot hold a spinlock across the get_user() in case it
-	 * faults, and we cannot just set TASK_INTERRUPTIBLE state when
-	 * queueing ourselves into the futex hash.  This code thus has to
-	 * rely on the futex_wake() code removing us from hash when it
-	 * wakes us up.
-	 */
+out:
+	if (ret)
+		put_futex_key(fshared, &q->key);
+	return ret;
+}
 
-	/* add_wait_queue is the barrier after __set_current_state. */
-	__set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&q.waiter, &wait);
-	/*
-	 * !plist_node_empty() is safe here without any lock.
-	 * q.lock_ptr != 0 is not safe, because of ordering against wakeup.
-	 */
-	if (likely(!plist_node_empty(&q.list))) {
-		if (!abs_time)
-			schedule();
-		else {
-			hrtimer_init_on_stack(&t.timer,
-					      clockrt ? CLOCK_REALTIME :
-					      CLOCK_MONOTONIC,
-					      HRTIMER_MODE_ABS);
-			hrtimer_init_sleeper(&t, current);
-			hrtimer_set_expires_range_ns(&t.timer, *abs_time,
-						     current->timer_slack_ns);
-
-			hrtimer_start_expires(&t.timer, HRTIMER_MODE_ABS);
-			if (!hrtimer_active(&t.timer))
-				t.task = NULL;
+static int futex_wait(u32 __user *uaddr, int fshared,
+		      u32 val, ktime_t *abs_time, u32 bitset, int clockrt)
+{
+	struct hrtimer_sleeper timeout, *to = NULL;
+	struct restart_block *restart;
+	struct futex_hash_bucket *hb;
+	struct futex_q q;
+	int ret;
 
-			/*
-			 * the timer could have already expired, in which
-			 * case current would be flagged for rescheduling.
-			 * Don't bother calling schedule.
-			 */
-			if (likely(t.task))
-				schedule();
+	if (!bitset)
+		return -EINVAL;
 
-			hrtimer_cancel(&t.timer);
+	q.pi_state = NULL;
+	q.bitset = bitset;
+	q.rt_waiter = NULL;
 
-			/* Flag if a timeout occured */
-			rem = (t.task == NULL);
+	if (abs_time) {
+		to = &timeout;
 
-			destroy_hrtimer_on_stack(&t.timer);
-		}
+		hrtimer_init_on_stack(&to->timer, clockrt ? CLOCK_REALTIME :
+				      CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+		hrtimer_init_sleeper(to, current);
+		hrtimer_set_expires_range_ns(&to->timer, *abs_time,
+					     current->timer_slack_ns);
 	}
-	__set_current_state(TASK_RUNNING);
 
-	/*
-	 * NOTE: we don't remove ourselves from the waitqueue because
-	 * we are the only user of it.
-	 */
+	/* Prepare to wait on uaddr. */
+	ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
+	if (ret)
+		goto out;
+
+	/* queue_me and wait for wakeup, timeout, or a signal. */
+	futex_wait_queue_me(hb, &q, to);
 
 	/* If we were woken (and unqueued), we succeeded, whatever. */
 	ret = 0;
 	if (!unqueue_me(&q))
 		goto out_put_key;
 	ret = -ETIMEDOUT;
-	if (rem)
+	if (to && !to->task)
 		goto out_put_key;
 
 	/*
@@ -1268,7 +1757,7 @@ retry_private:
 	restart->futex.val = val;
 	restart->futex.time = abs_time->tv64;
 	restart->futex.bitset = bitset;
-	restart->futex.flags = 0;
+	restart->futex.flags = FLAGS_HAS_TIMEOUT;
 
 	if (fshared)
 		restart->futex.flags |= FLAGS_SHARED;
@@ -1280,6 +1769,10 @@ retry_private:
 out_put_key:
 	put_futex_key(fshared, &q.key);
 out:
+	if (to) {
+		hrtimer_cancel(&to->timer);
+		destroy_hrtimer_on_stack(&to->timer);
+	}
 	return ret;
 }
 
@@ -1288,13 +1781,16 @@ static long futex_wait_restart(struct restart_block *restart)
 {
 	u32 __user *uaddr = (u32 __user *)restart->futex.uaddr;
 	int fshared = 0;
-	ktime_t t;
+	ktime_t t, *tp = NULL;
 
-	t.tv64 = restart->futex.time;
+	if (restart->futex.flags & FLAGS_HAS_TIMEOUT) {
+		t.tv64 = restart->futex.time;
+		tp = &t;
+	}
 	restart->fn = do_no_restart_syscall;
 	if (restart->futex.flags & FLAGS_SHARED)
 		fshared = 1;
-	return (long)futex_wait(uaddr, fshared, restart->futex.val, &t,
+	return (long)futex_wait(uaddr, fshared, restart->futex.val, tp,
 				restart->futex.bitset,
 				restart->futex.flags & FLAGS_CLOCKRT);
 }
@@ -1310,11 +1806,10 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared,
 			 int detect, ktime_t *time, int trylock)
 {
 	struct hrtimer_sleeper timeout, *to = NULL;
-	struct task_struct *curr = current;
 	struct futex_hash_bucket *hb;
-	u32 uval, newval, curval;
+	u32 uval;
 	struct futex_q q;
-	int ret, lock_taken, ownerdied = 0;
+	int res, ret;
 
 	if (refill_pi_state_cache())
 		return -ENOMEM;
@@ -1328,90 +1823,25 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared,
 	}
 
 	q.pi_state = NULL;
+	q.rt_waiter = NULL;
 retry:
 	q.key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q.key);
+	ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
 	if (unlikely(ret != 0))
 		goto out;
 
 retry_private:
 	hb = queue_lock(&q);
 
-retry_locked:
-	ret = lock_taken = 0;
-
-	/*
-	 * To avoid races, we attempt to take the lock here again
-	 * (by doing a 0 -> TID atomic cmpxchg), while holding all
-	 * the locks. It will most likely not succeed.
-	 */
-	newval = task_pid_vnr(current);
-
-	curval = cmpxchg_futex_value_locked(uaddr, 0, newval);
-
-	if (unlikely(curval == -EFAULT))
-		goto uaddr_faulted;
-
-	/*
-	 * Detect deadlocks. In case of REQUEUE_PI this is a valid
-	 * situation and we return success to user space.
-	 */
-	if (unlikely((curval & FUTEX_TID_MASK) == task_pid_vnr(current))) {
-		ret = -EDEADLK;
-		goto out_unlock_put_key;
-	}
-
-	/*
-	 * Surprise - we got the lock. Just return to userspace:
-	 */
-	if (unlikely(!curval))
-		goto out_unlock_put_key;
-
-	uval = curval;
-
-	/*
-	 * Set the WAITERS flag, so the owner will know it has someone
-	 * to wake at next unlock
-	 */
-	newval = curval | FUTEX_WAITERS;
-
-	/*
-	 * There are two cases, where a futex might have no owner (the
-	 * owner TID is 0): OWNER_DIED. We take over the futex in this
-	 * case. We also do an unconditional take over, when the owner
-	 * of the futex died.
-	 *
-	 * This is safe as we are protected by the hash bucket lock !
-	 */
-	if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
-		/* Keep the OWNER_DIED bit */
-		newval = (curval & ~FUTEX_TID_MASK) | task_pid_vnr(current);
-		ownerdied = 0;
-		lock_taken = 1;
-	}
-
-	curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
-
-	if (unlikely(curval == -EFAULT))
-		goto uaddr_faulted;
-	if (unlikely(curval != uval))
-		goto retry_locked;
-
-	/*
-	 * We took the lock due to owner died take over.
-	 */
-	if (unlikely(lock_taken))
-		goto out_unlock_put_key;
-
-	/*
-	 * We dont have the lock. Look up the PI state (or create it if
-	 * we are the first waiter):
-	 */
-	ret = lookup_pi_state(uval, hb, &q.key, &q.pi_state);
-
+	ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current, 0);
 	if (unlikely(ret)) {
 		switch (ret) {
-
+		case 1:
+			/* We got the lock. */
+			ret = 0;
+			goto out_unlock_put_key;
+		case -EFAULT:
+			goto uaddr_faulted;
 		case -EAGAIN:
 			/*
 			 * Task is exiting and we just wait for the
@@ -1421,25 +1851,6 @@ retry_locked:
 			put_futex_key(fshared, &q.key);
 			cond_resched();
 			goto retry;
-
-		case -ESRCH:
-			/*
-			 * No owner found for this futex. Check if the
-			 * OWNER_DIED bit is set to figure out whether
-			 * this is a robust futex or not.
-			 */
-			if (get_futex_value_locked(&curval, uaddr))
-				goto uaddr_faulted;
-
-			/*
-			 * We simply start over in case of a robust
-			 * futex. The code above will take the futex
-			 * and return happy.
-			 */
-			if (curval & FUTEX_OWNER_DIED) {
-				ownerdied = 1;
-				goto retry_locked;
-			}
 		default:
 			goto out_unlock_put_key;
 		}
@@ -1463,71 +1874,21 @@ retry_locked:
 	}
 
 	spin_lock(q.lock_ptr);
-
-	if (!ret) {
-		/*
-		 * Got the lock. We might not be the anticipated owner
-		 * if we did a lock-steal - fix up the PI-state in
-		 * that case:
-		 */
-		if (q.pi_state->owner != curr)
-			ret = fixup_pi_state_owner(uaddr, &q, curr, fshared);
-	} else {
-		/*
-		 * Catch the rare case, where the lock was released
-		 * when we were on the way back before we locked the
-		 * hash bucket.
-		 */
-		if (q.pi_state->owner == curr) {
-			/*
-			 * Try to get the rt_mutex now. This might
-			 * fail as some other task acquired the
-			 * rt_mutex after we removed ourself from the
-			 * rt_mutex waiters list.
-			 */
-			if (rt_mutex_trylock(&q.pi_state->pi_mutex))
-				ret = 0;
-			else {
-				/*
-				 * pi_state is incorrect, some other
-				 * task did a lock steal and we
-				 * returned due to timeout or signal
-				 * without taking the rt_mutex. Too
-				 * late. We can access the
-				 * rt_mutex_owner without locking, as
-				 * the other task is now blocked on
-				 * the hash bucket lock. Fix the state
-				 * up.
-				 */
-				struct task_struct *owner;
-				int res;
-
-				owner = rt_mutex_owner(&q.pi_state->pi_mutex);
-				res = fixup_pi_state_owner(uaddr, &q, owner,
-							   fshared);
-
-				/* propagate -EFAULT, if the fixup failed */
-				if (res)
-					ret = res;
-			}
-		} else {
-			/*
-			 * Paranoia check. If we did not take the lock
-			 * in the trylock above, then we should not be
-			 * the owner of the rtmutex, neither the real
-			 * nor the pending one:
-			 */
-			if (rt_mutex_owner(&q.pi_state->pi_mutex) == curr)
-				printk(KERN_ERR "futex_lock_pi: ret = %d "
-				       "pi-mutex: %p pi-state %p\n", ret,
-				       q.pi_state->pi_mutex.owner,
-				       q.pi_state->owner);
-		}
-	}
+	/*
+	 * Fixup the pi_state owner and possibly acquire the lock if we
+	 * haven't already.
+	 */
+	res = fixup_owner(uaddr, fshared, &q, !ret);
+	/*
+	 * If fixup_owner() returned an error, proprogate that.  If it acquired
+	 * the lock, clear our -ETIMEDOUT or -EINTR.
+	 */
+	if (res)
+		ret = (res < 0) ? res : 0;
 
 	/*
-	 * If fixup_pi_state_owner() faulted and was unable to handle the
-	 * fault, unlock it and return the fault to userspace.
+	 * If fixup_owner() faulted and was unable to handle the fault, unlock
+	 * it and return the fault to userspace.
 	 */
 	if (ret && (rt_mutex_owner(&q.pi_state->pi_mutex) == current))
 		rt_mutex_unlock(&q.pi_state->pi_mutex);
@@ -1535,9 +1896,7 @@ retry_locked:
 	/* Unqueue and drop the lock */
 	unqueue_me_pi(&q);
 
-	if (to)
-		destroy_hrtimer_on_stack(&to->timer);
-	return ret != -EINTR ? ret : -ERESTARTNOINTR;
+	goto out;
 
 out_unlock_put_key:
 	queue_unlock(&q, hb);
@@ -1547,7 +1906,7 @@ out_put_key:
 out:
 	if (to)
 		destroy_hrtimer_on_stack(&to->timer);
-	return ret;
+	return ret != -EINTR ? ret : -ERESTARTNOINTR;
 
 uaddr_faulted:
 	/*
@@ -1570,7 +1929,6 @@ uaddr_faulted:
 	goto retry;
 }
 
-
 /*
  * Userspace attempted a TID -> 0 atomic transition, and failed.
  * This is the in-kernel slowpath: we look up the PI state (if any),
@@ -1594,7 +1952,7 @@ retry:
 	if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
 		return -EPERM;
 
-	ret = get_futex_key(uaddr, fshared, &key);
+	ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -1672,6 +2030,229 @@ pi_faulted:
 	return ret;
 }
 
+/**
+ * handle_early_requeue_pi_wakeup() - Detect early wakeup on the initial futex
+ * @hb:		the hash_bucket futex_q was original enqueued on
+ * @q:		the futex_q woken while waiting to be requeued
+ * @key2:	the futex_key of the requeue target futex
+ * @timeout:	the timeout associated with the wait (NULL if none)
+ *
+ * Detect if the task was woken on the initial futex as opposed to the requeue
+ * target futex.  If so, determine if it was a timeout or a signal that caused
+ * the wakeup and return the appropriate error code to the caller.  Must be
+ * called with the hb lock held.
+ *
+ * Returns
+ *  0 - no early wakeup detected
+ * <0 - -ETIMEDOUT or -ERESTARTNOINTR
+ */
+static inline
+int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
+				   struct futex_q *q, union futex_key *key2,
+				   struct hrtimer_sleeper *timeout)
+{
+	int ret = 0;
+
+	/*
+	 * With the hb lock held, we avoid races while we process the wakeup.
+	 * We only need to hold hb (and not hb2) to ensure atomicity as the
+	 * wakeup code can't change q.key from uaddr to uaddr2 if we hold hb.
+	 * It can't be requeued from uaddr2 to something else since we don't
+	 * support a PI aware source futex for requeue.
+	 */
+	if (!match_futex(&q->key, key2)) {
+		WARN_ON(q->lock_ptr && (&hb->lock != q->lock_ptr));
+		/*
+		 * We were woken prior to requeue by a timeout or a signal.
+		 * Unqueue the futex_q and determine which it was.
+		 */
+		plist_del(&q->list, &q->list.plist);
+		drop_futex_key_refs(&q->key);
+
+		if (timeout && !timeout->task)
+			ret = -ETIMEDOUT;
+		else
+			ret = -ERESTARTNOINTR;
+	}
+	return ret;
+}
+
+/**
+ * futex_wait_requeue_pi() - Wait on uaddr and take uaddr2
+ * @uaddr:	the futex we initialyl wait on (non-pi)
+ * @fshared:	whether the futexes are shared (1) or not (0).  They must be
+ * 		the same type, no requeueing from private to shared, etc.
+ * @val:	the expected value of uaddr
+ * @abs_time:	absolute timeout
+ * @bitset:	32 bit wakeup bitset set by userspace, defaults to all.
+ * @clockrt:	whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
+ * @uaddr2:	the pi futex we will take prior to returning to user-space
+ *
+ * The caller will wait on uaddr and will be requeued by futex_requeue() to
+ * uaddr2 which must be PI aware.  Normal wakeup will wake on uaddr2 and
+ * complete the acquisition of the rt_mutex prior to returning to userspace.
+ * This ensures the rt_mutex maintains an owner when it has waiters; without
+ * one, the pi logic wouldn't know which task to boost/deboost, if there was a
+ * need to.
+ *
+ * We call schedule in futex_wait_queue_me() when we enqueue and return there
+ * via the following:
+ * 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue()
+ * 2) wakeup on uaddr2 after a requeue and subsequent unlock
+ * 3) signal (before or after requeue)
+ * 4) timeout (before or after requeue)
+ *
+ * If 3, we setup a restart_block with futex_wait_requeue_pi() as the function.
+ *
+ * If 2, we may then block on trying to take the rt_mutex and return via:
+ * 5) successful lock
+ * 6) signal
+ * 7) timeout
+ * 8) other lock acquisition failure
+ *
+ * If 6, we setup a restart_block with futex_lock_pi() as the function.
+ *
+ * If 4 or 7, we cleanup and return with -ETIMEDOUT.
+ *
+ * Returns:
+ *  0 - On success
+ * <0 - On error
+ */
+static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
+				 u32 val, ktime_t *abs_time, u32 bitset,
+				 int clockrt, u32 __user *uaddr2)
+{
+	struct hrtimer_sleeper timeout, *to = NULL;
+	struct rt_mutex_waiter rt_waiter;
+	struct rt_mutex *pi_mutex = NULL;
+	struct futex_hash_bucket *hb;
+	union futex_key key2;
+	struct futex_q q;
+	int res, ret;
+
+	if (!bitset)
+		return -EINVAL;
+
+	if (abs_time) {
+		to = &timeout;
+		hrtimer_init_on_stack(&to->timer, clockrt ? CLOCK_REALTIME :
+				      CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+		hrtimer_init_sleeper(to, current);
+		hrtimer_set_expires_range_ns(&to->timer, *abs_time,
+					     current->timer_slack_ns);
+	}
+
+	/*
+	 * The waiter is allocated on our stack, manipulated by the requeue
+	 * code while we sleep on uaddr.
+	 */
+	debug_rt_mutex_init_waiter(&rt_waiter);
+	rt_waiter.task = NULL;
+
+	q.pi_state = NULL;
+	q.bitset = bitset;
+	q.rt_waiter = &rt_waiter;
+
+	key2 = FUTEX_KEY_INIT;
+	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+	if (unlikely(ret != 0))
+		goto out;
+
+	/* Prepare to wait on uaddr. */
+	ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
+	if (ret)
+		goto out_key2;
+
+	/* Queue the futex_q, drop the hb lock, wait for wakeup. */
+	futex_wait_queue_me(hb, &q, to);
+
+	spin_lock(&hb->lock);
+	ret = handle_early_requeue_pi_wakeup(hb, &q, &key2, to);
+	spin_unlock(&hb->lock);
+	if (ret)
+		goto out_put_keys;
+
+	/*
+	 * In order for us to be here, we know our q.key == key2, and since
+	 * we took the hb->lock above, we also know that futex_requeue() has
+	 * completed and we no longer have to concern ourselves with a wakeup
+	 * race with the atomic proxy lock acquition by the requeue code.
+	 */
+
+	/* Check if the requeue code acquired the second futex for us. */
+	if (!q.rt_waiter) {
+		/*
+		 * Got the lock. We might not be the anticipated owner if we
+		 * did a lock-steal - fix up the PI-state in that case.
+		 */
+		if (q.pi_state && (q.pi_state->owner != current)) {
+			spin_lock(q.lock_ptr);
+			ret = fixup_pi_state_owner(uaddr2, &q, current,
+						   fshared);
+			spin_unlock(q.lock_ptr);
+		}
+	} else {
+		/*
+		 * We have been woken up by futex_unlock_pi(), a timeout, or a
+		 * signal.  futex_unlock_pi() will not destroy the lock_ptr nor
+		 * the pi_state.
+		 */
+		WARN_ON(!&q.pi_state);
+		pi_mutex = &q.pi_state->pi_mutex;
+		ret = rt_mutex_finish_proxy_lock(pi_mutex, to, &rt_waiter, 1);
+		debug_rt_mutex_free_waiter(&rt_waiter);
+
+		spin_lock(q.lock_ptr);
+		/*
+		 * Fixup the pi_state owner and possibly acquire the lock if we
+		 * haven't already.
+		 */
+		res = fixup_owner(uaddr2, fshared, &q, !ret);
+		/*
+		 * If fixup_owner() returned an error, proprogate that.  If it
+		 * acquired the lock, clear our -ETIMEDOUT or -EINTR.
+		 */
+		if (res)
+			ret = (res < 0) ? res : 0;
+
+		/* Unqueue and drop the lock. */
+		unqueue_me_pi(&q);
+	}
+
+	/*
+	 * If fixup_pi_state_owner() faulted and was unable to handle the
+	 * fault, unlock the rt_mutex and return the fault to userspace.
+	 */
+	if (ret == -EFAULT) {
+		if (rt_mutex_owner(pi_mutex) == current)
+			rt_mutex_unlock(pi_mutex);
+	} else if (ret == -EINTR) {
+		/*
+		 * We've already been requeued, but we have no way to
+		 * restart by calling futex_lock_pi() directly. We
+		 * could restart the syscall, but that will look at
+		 * the user space value and return right away. So we
+		 * drop back with EWOULDBLOCK to tell user space that
+		 * "val" has been changed. That's the same what the
+		 * restart of the syscall would do in
+		 * futex_wait_setup().
+		 */
+		ret = -EWOULDBLOCK;
+	}
+
+out_put_keys:
+	put_futex_key(fshared, &q.key);
+out_key2:
+	put_futex_key(fshared, &key2);
+
+out:
+	if (to) {
+		hrtimer_cancel(&to->timer);
+		destroy_hrtimer_on_stack(&to->timer);
+	}
+	return ret;
+}
+
 /*
  * Support for robust futexes: the kernel cleans up held futexes at
  * thread exit time.
@@ -1894,7 +2475,7 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 		fshared = 1;
 
 	clockrt = op & FUTEX_CLOCK_REALTIME;
-	if (clockrt && cmd != FUTEX_WAIT_BITSET)
+	if (clockrt && cmd != FUTEX_WAIT_BITSET && cmd != FUTEX_WAIT_REQUEUE_PI)
 		return -ENOSYS;
 
 	switch (cmd) {
@@ -1909,10 +2490,11 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 		ret = futex_wake(uaddr, fshared, val, val3);
 		break;
 	case FUTEX_REQUEUE:
-		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, NULL);
+		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, NULL, 0);
 		break;
 	case FUTEX_CMP_REQUEUE:
-		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, &val3);
+		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, &val3,
+				    0);
 		break;
 	case FUTEX_WAKE_OP:
 		ret = futex_wake_op(uaddr, fshared, uaddr2, val, val2, val3);
@@ -1929,6 +2511,15 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 		if (futex_cmpxchg_enabled)
 			ret = futex_lock_pi(uaddr, fshared, 0, timeout, 1);
 		break;
+	case FUTEX_WAIT_REQUEUE_PI:
+		val3 = FUTEX_BITSET_MATCH_ANY;
+		ret = futex_wait_requeue_pi(uaddr, fshared, val, timeout, val3,
+					    clockrt, uaddr2);
+		break;
+	case FUTEX_CMP_REQUEUE_PI:
+		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, &val3,
+				    1);
+		break;
 	default:
 		ret = -ENOSYS;
 	}
@@ -1946,7 +2537,8 @@ SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val,
 	int cmd = op & FUTEX_CMD_MASK;
 
 	if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI ||
-		      cmd == FUTEX_WAIT_BITSET)) {
+		      cmd == FUTEX_WAIT_BITSET ||
+		      cmd == FUTEX_WAIT_REQUEUE_PI)) {
 		if (copy_from_user(&ts, utime, sizeof(ts)) != 0)
 			return -EFAULT;
 		if (!timespec_valid(&ts))
@@ -1958,11 +2550,11 @@ SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val,
 		tp = &t;
 	}
 	/*
-	 * requeue parameter in 'utime' if cmd == FUTEX_REQUEUE.
+	 * requeue parameter in 'utime' if cmd == FUTEX_*_REQUEUE_*.
 	 * number of waiters to wake in 'utime' if cmd == FUTEX_WAKE_OP.
 	 */
 	if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE ||
-	    cmd == FUTEX_WAKE_OP)
+	    cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP)
 		val2 = (u32) (unsigned long) utime;
 
 	return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
index 3394f8f5296..7d047808419 100644
--- a/kernel/irq/Makefile
+++ b/kernel/irq/Makefile
@@ -3,5 +3,5 @@ obj-y := handle.o manage.o spurious.o resend.o chip.o devres.o
 obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
-obj-$(CONFIG_NUMA_MIGRATE_IRQ_DESC) += numa_migrate.o
+obj-$(CONFIG_NUMA_IRQ_DESC) += numa_migrate.o
 obj-$(CONFIG_PM_SLEEP) += pm.o
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index c687ba4363f..13c68e71b72 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -359,7 +359,6 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc)
 
 	spin_lock(&desc->lock);
 	mask_ack_irq(desc, irq);
-	desc = irq_remap_to_desc(irq, desc);
 
 	if (unlikely(desc->status & IRQ_INPROGRESS))
 		goto out_unlock;
@@ -438,7 +437,6 @@ handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
 	desc->status &= ~IRQ_INPROGRESS;
 out:
 	desc->chip->eoi(irq);
-	desc = irq_remap_to_desc(irq, desc);
 
 	spin_unlock(&desc->lock);
 }
@@ -475,7 +473,6 @@ handle_edge_irq(unsigned int irq, struct irq_desc *desc)
 		    !desc->action)) {
 		desc->status |= (IRQ_PENDING | IRQ_MASKED);
 		mask_ack_irq(desc, irq);
-		desc = irq_remap_to_desc(irq, desc);
 		goto out_unlock;
 	}
 	kstat_incr_irqs_this_cpu(irq, desc);
@@ -483,7 +480,6 @@ handle_edge_irq(unsigned int irq, struct irq_desc *desc)
 	/* Start handling the irq */
 	if (desc->chip->ack)
 		desc->chip->ack(irq);
-	desc = irq_remap_to_desc(irq, desc);
 
 	/* Mark the IRQ currently in progress.*/
 	desc->status |= IRQ_INPROGRESS;
@@ -544,10 +540,8 @@ handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
 	if (!noirqdebug)
 		note_interrupt(irq, desc, action_ret);
 
-	if (desc->chip->eoi) {
+	if (desc->chip->eoi)
 		desc->chip->eoi(irq);
-		desc = irq_remap_to_desc(irq, desc);
-	}
 }
 
 void
@@ -582,10 +576,8 @@ __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
 
 	/* Uninstall? */
 	if (handle == handle_bad_irq) {
-		if (desc->chip != &no_irq_chip) {
+		if (desc->chip != &no_irq_chip)
 			mask_ack_irq(desc, irq);
-			desc = irq_remap_to_desc(irq, desc);
-		}
 		desc->status |= IRQ_DISABLED;
 		desc->depth = 1;
 	}
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 26e08754744..065205bdd92 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -11,14 +11,15 @@
  */
 
 #include <linux/irq.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/rculist.h>
 #include <linux/hash.h>
-#include <trace/irq.h>
 #include <linux/bootmem.h>
+#include <trace/events/irq.h>
 
 #include "internals.h"
 
@@ -44,7 +45,7 @@ void handle_bad_irq(unsigned int irq, struct irq_desc *desc)
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 static void __init init_irq_default_affinity(void)
 {
-	alloc_bootmem_cpumask_var(&irq_default_affinity);
+	alloc_cpumask_var(&irq_default_affinity, GFP_NOWAIT);
 	cpumask_setall(irq_default_affinity);
 }
 #else
@@ -81,45 +82,48 @@ static struct irq_desc irq_desc_init = {
 	.lock       = __SPIN_LOCK_UNLOCKED(irq_desc_init.lock),
 };
 
-void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr)
+void __ref init_kstat_irqs(struct irq_desc *desc, int node, int nr)
 {
-	int node;
 	void *ptr;
 
-	node = cpu_to_node(cpu);
-	ptr = kzalloc_node(nr * sizeof(*desc->kstat_irqs), GFP_ATOMIC, node);
+	if (slab_is_available())
+		ptr = kzalloc_node(nr * sizeof(*desc->kstat_irqs),
+				   GFP_ATOMIC, node);
+	else
+		ptr = alloc_bootmem_node(NODE_DATA(node),
+				nr * sizeof(*desc->kstat_irqs));
 
 	/*
 	 * don't overwite if can not get new one
 	 * init_copy_kstat_irqs() could still use old one
 	 */
 	if (ptr) {
-		printk(KERN_DEBUG "  alloc kstat_irqs on cpu %d node %d\n",
-			 cpu, node);
+		printk(KERN_DEBUG "  alloc kstat_irqs on node %d\n", node);
 		desc->kstat_irqs = ptr;
 	}
 }
 
-static void init_one_irq_desc(int irq, struct irq_desc *desc, int cpu)
+static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)
 {
 	memcpy(desc, &irq_desc_init, sizeof(struct irq_desc));
 
 	spin_lock_init(&desc->lock);
 	desc->irq = irq;
 #ifdef CONFIG_SMP
-	desc->cpu = cpu;
+	desc->node = node;
 #endif
 	lockdep_set_class(&desc->lock, &irq_desc_lock_class);
-	init_kstat_irqs(desc, cpu, nr_cpu_ids);
+	init_kstat_irqs(desc, node, nr_cpu_ids);
 	if (!desc->kstat_irqs) {
 		printk(KERN_ERR "can not alloc kstat_irqs\n");
 		BUG_ON(1);
 	}
-	if (!init_alloc_desc_masks(desc, cpu, false)) {
+	if (!alloc_desc_masks(desc, node, false)) {
 		printk(KERN_ERR "can not alloc irq_desc cpumasks\n");
 		BUG_ON(1);
 	}
-	arch_init_chip_data(desc, cpu);
+	init_desc_masks(desc);
+	arch_init_chip_data(desc, node);
 }
 
 /*
@@ -146,6 +150,7 @@ int __init early_irq_init(void)
 {
 	struct irq_desc *desc;
 	int legacy_count;
+	int node;
 	int i;
 
 	init_irq_default_affinity();
@@ -156,20 +161,21 @@ int __init early_irq_init(void)
 
 	desc = irq_desc_legacy;
 	legacy_count = ARRAY_SIZE(irq_desc_legacy);
+ 	node = first_online_node;
 
 	/* allocate irq_desc_ptrs array based on nr_irqs */
-	irq_desc_ptrs = alloc_bootmem(nr_irqs * sizeof(void *));
+	irq_desc_ptrs = kcalloc(nr_irqs, sizeof(void *), GFP_NOWAIT);
 
 	/* allocate based on nr_cpu_ids */
-	/* FIXME: invert kstat_irgs, and it'd be a per_cpu_alloc'd thing */
-	kstat_irqs_legacy = alloc_bootmem(NR_IRQS_LEGACY * nr_cpu_ids *
-					  sizeof(int));
+	kstat_irqs_legacy = kzalloc_node(NR_IRQS_LEGACY * nr_cpu_ids *
+					  sizeof(int), GFP_NOWAIT, node);
 
 	for (i = 0; i < legacy_count; i++) {
 		desc[i].irq = i;
 		desc[i].kstat_irqs = kstat_irqs_legacy + i * nr_cpu_ids;
 		lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
-		init_alloc_desc_masks(&desc[i], 0, true);
+		alloc_desc_masks(&desc[i], node, true);
+		init_desc_masks(&desc[i]);
 		irq_desc_ptrs[i] = desc + i;
 	}
 
@@ -187,11 +193,10 @@ struct irq_desc *irq_to_desc(unsigned int irq)
 	return NULL;
 }
 
-struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
+struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)
 {
 	struct irq_desc *desc;
 	unsigned long flags;
-	int node;
 
 	if (irq >= nr_irqs) {
 		WARN(1, "irq (%d) >= nr_irqs (%d) in irq_to_desc_alloc\n",
@@ -210,15 +215,17 @@ struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
 	if (desc)
 		goto out_unlock;
 
-	node = cpu_to_node(cpu);
-	desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
-	printk(KERN_DEBUG "  alloc irq_desc for %d on cpu %d node %d\n",
-		 irq, cpu, node);
+	if (slab_is_available())
+		desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
+	else
+		desc = alloc_bootmem_node(NODE_DATA(node), sizeof(*desc));
+
+	printk(KERN_DEBUG "  alloc irq_desc for %d on node %d\n", irq, node);
 	if (!desc) {
 		printk(KERN_ERR "can not alloc irq_desc\n");
 		BUG_ON(1);
 	}
-	init_one_irq_desc(irq, desc, cpu);
+	init_one_irq_desc(irq, desc, node);
 
 	irq_desc_ptrs[irq] = desc;
 
@@ -256,7 +263,8 @@ int __init early_irq_init(void)
 
 	for (i = 0; i < count; i++) {
 		desc[i].irq = i;
-		init_alloc_desc_masks(&desc[i], 0, true);
+		alloc_desc_masks(&desc[i], 0, true);
+		init_desc_masks(&desc[i]);
 		desc[i].kstat_irqs = kstat_irqs_all[i];
 	}
 	return arch_early_irq_init();
@@ -267,7 +275,7 @@ struct irq_desc *irq_to_desc(unsigned int irq)
 	return (irq < NR_IRQS) ? irq_desc + irq : NULL;
 }
 
-struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
+struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node)
 {
 	return irq_to_desc(irq);
 }
@@ -348,9 +356,6 @@ static void warn_no_thread(unsigned int irq, struct irqaction *action)
 	       "but no thread function available.", irq, action->name);
 }
 
-DEFINE_TRACE(irq_handler_entry);
-DEFINE_TRACE(irq_handler_exit);
-
 /**
  * handle_IRQ_event - irq action chain handler
  * @irq:	the interrupt number
@@ -453,11 +458,8 @@ unsigned int __do_IRQ(unsigned int irq)
 		/*
 		 * No locking required for CPU-local interrupts:
 		 */
-		if (desc->chip->ack) {
+		if (desc->chip->ack)
 			desc->chip->ack(irq);
-			/* get new one */
-			desc = irq_remap_to_desc(irq, desc);
-		}
 		if (likely(!(desc->status & IRQ_DISABLED))) {
 			action_ret = handle_IRQ_event(irq, desc->action);
 			if (!noirqdebug)
@@ -468,10 +470,8 @@ unsigned int __do_IRQ(unsigned int irq)
 	}
 
 	spin_lock(&desc->lock);
-	if (desc->chip->ack) {
+	if (desc->chip->ack)
 		desc->chip->ack(irq);
-		desc = irq_remap_to_desc(irq, desc);
-	}
 	/*
 	 * REPLAY is when Linux resends an IRQ that was dropped earlier
 	 * WAITING is used by probe to mark irqs that are being tested
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 01ce20eab38..73468253143 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -16,7 +16,7 @@ extern void __disable_irq(struct irq_desc *desc, unsigned int irq, bool susp);
 extern void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume);
 
 extern struct lock_class_key irq_desc_lock_class;
-extern void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr);
+extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
 extern void clear_kstat_irqs(struct irq_desc *desc);
 extern spinlock_t sparse_irq_lock;
 
@@ -42,6 +42,9 @@ static inline void unregister_handler_proc(unsigned int irq,
 
 extern int irq_select_affinity_usr(unsigned int irq);
 
+extern void
+irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+
 /*
  * Debugging printout:
  */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 2734eca5924..aaf5c9d0577 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -80,7 +80,7 @@ int irq_can_set_affinity(unsigned int irq)
 	return 1;
 }
 
-static void
+void
 irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
 {
 	struct irqaction *action = desc->action;
@@ -109,17 +109,22 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	spin_lock_irqsave(&desc->lock, flags);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-	if (desc->status & IRQ_MOVE_PCNTXT)
-		desc->chip->set_affinity(irq, cpumask);
+	if (desc->status & IRQ_MOVE_PCNTXT) {
+		if (!desc->chip->set_affinity(irq, cpumask)) {
+			cpumask_copy(desc->affinity, cpumask);
+			irq_set_thread_affinity(desc, cpumask);
+		}
+	}
 	else {
 		desc->status |= IRQ_MOVE_PENDING;
 		cpumask_copy(desc->pending_mask, cpumask);
 	}
 #else
-	cpumask_copy(desc->affinity, cpumask);
-	desc->chip->set_affinity(irq, cpumask);
+	if (!desc->chip->set_affinity(irq, cpumask)) {
+		cpumask_copy(desc->affinity, cpumask);
+		irq_set_thread_affinity(desc, cpumask);
+	}
 #endif
-	irq_set_thread_affinity(desc, cpumask);
 	desc->status |= IRQ_AFFINITY_SET;
 	spin_unlock_irqrestore(&desc->lock, flags);
 	return 0;
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index e05ad9be43b..cfe767ca154 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -1,5 +1,8 @@
 
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include "internals.h"
 
 void move_masked_irq(int irq)
 {
@@ -39,11 +42,12 @@ void move_masked_irq(int irq)
 	 * masking the irqs.
 	 */
 	if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask)
-		   < nr_cpu_ids)) {
-		cpumask_and(desc->affinity,
-			    desc->pending_mask, cpu_online_mask);
-		desc->chip->set_affinity(irq, desc->affinity);
-	}
+		   < nr_cpu_ids))
+		if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
+			cpumask_copy(desc->affinity, desc->pending_mask);
+			irq_set_thread_affinity(desc, desc->pending_mask);
+		}
+
 	cpumask_clear(desc->pending_mask);
 }
 
diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c
index 44bbdcbaf8d..2f69bee57bf 100644
--- a/kernel/irq/numa_migrate.c
+++ b/kernel/irq/numa_migrate.c
@@ -15,9 +15,9 @@
 
 static void init_copy_kstat_irqs(struct irq_desc *old_desc,
 				 struct irq_desc *desc,
-				 int cpu, int nr)
+				 int node, int nr)
 {
-	init_kstat_irqs(desc, cpu, nr);
+	init_kstat_irqs(desc, node, nr);
 
 	if (desc->kstat_irqs != old_desc->kstat_irqs)
 		memcpy(desc->kstat_irqs, old_desc->kstat_irqs,
@@ -34,20 +34,20 @@ static void free_kstat_irqs(struct irq_desc *old_desc, struct irq_desc *desc)
 }
 
 static bool init_copy_one_irq_desc(int irq, struct irq_desc *old_desc,
-		 struct irq_desc *desc, int cpu)
+		 struct irq_desc *desc, int node)
 {
 	memcpy(desc, old_desc, sizeof(struct irq_desc));
-	if (!init_alloc_desc_masks(desc, cpu, false)) {
+	if (!alloc_desc_masks(desc, node, false)) {
 		printk(KERN_ERR "irq %d: can not get new irq_desc cpumask "
 				"for migration.\n", irq);
 		return false;
 	}
 	spin_lock_init(&desc->lock);
-	desc->cpu = cpu;
+	desc->node = node;
 	lockdep_set_class(&desc->lock, &irq_desc_lock_class);
-	init_copy_kstat_irqs(old_desc, desc, cpu, nr_cpu_ids);
+	init_copy_kstat_irqs(old_desc, desc, node, nr_cpu_ids);
 	init_copy_desc_masks(old_desc, desc);
-	arch_init_copy_chip_data(old_desc, desc, cpu);
+	arch_init_copy_chip_data(old_desc, desc, node);
 	return true;
 }
 
@@ -59,12 +59,11 @@ static void free_one_irq_desc(struct irq_desc *old_desc, struct irq_desc *desc)
 }
 
 static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,
-						int cpu)
+						int node)
 {
 	struct irq_desc *desc;
 	unsigned int irq;
 	unsigned long flags;
-	int node;
 
 	irq = old_desc->irq;
 
@@ -76,7 +75,6 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,
 	if (desc && old_desc != desc)
 		goto out_unlock;
 
-	node = cpu_to_node(cpu);
 	desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
 	if (!desc) {
 		printk(KERN_ERR "irq %d: can not get new irq_desc "
@@ -85,7 +83,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,
 		desc = old_desc;
 		goto out_unlock;
 	}
-	if (!init_copy_one_irq_desc(irq, old_desc, desc, cpu)) {
+	if (!init_copy_one_irq_desc(irq, old_desc, desc, node)) {
 		/* still use old one */
 		kfree(desc);
 		desc = old_desc;
@@ -97,9 +95,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,
 
 	/* free the old one */
 	free_one_irq_desc(old_desc, desc);
-	spin_unlock(&old_desc->lock);
 	kfree(old_desc);
-	spin_lock(&desc->lock);
 
 	return desc;
 
@@ -109,24 +105,14 @@ out_unlock:
 	return desc;
 }
 
-struct irq_desc *move_irq_desc(struct irq_desc *desc, int cpu)
+struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
 {
-	int old_cpu;
-	int node, old_node;
-
 	/* those all static, do move them */
 	if (desc->irq < NR_IRQS_LEGACY)
 		return desc;
 
-	old_cpu = desc->cpu;
-	if (old_cpu != cpu) {
-		node = cpu_to_node(cpu);
-		old_node = cpu_to_node(old_cpu);
-		if (old_node != node)
-			desc = __real_move_irq_desc(desc, cpu);
-		else
-			desc->cpu = cpu;
-	}
+	if (desc->node != node)
+		desc = __real_move_irq_desc(desc, node);
 
 	return desc;
 }
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 5a758c6e495..ae1c35201cc 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1448,18 +1448,17 @@ int kernel_kexec(void)
 			goto Restore_console;
 		}
 		suspend_console();
-		error = device_suspend(PMSG_FREEZE);
+		error = dpm_suspend_start(PMSG_FREEZE);
 		if (error)
 			goto Resume_console;
-		device_pm_lock();
-		/* At this point, device_suspend() has been called,
-		 * but *not* device_power_down(). We *must*
-		 * device_power_down() now.  Otherwise, drivers for
+		/* At this point, dpm_suspend_start() has been called,
+		 * but *not* dpm_suspend_noirq(). We *must* call
+		 * dpm_suspend_noirq() now.  Otherwise, drivers for
 		 * some devices (e.g. interrupt controllers) become
 		 * desynchronized with the actual state of the
 		 * hardware at resume time, and evil weirdness ensues.
 		 */
-		error = device_power_down(PMSG_FREEZE);
+		error = dpm_suspend_noirq(PMSG_FREEZE);
 		if (error)
 			goto Resume_devices;
 		error = disable_nonboot_cpus();
@@ -1487,10 +1486,9 @@ int kernel_kexec(void)
 		local_irq_enable();
  Enable_cpus:
 		enable_nonboot_cpus();
-		device_power_up(PMSG_RESTORE);
+		dpm_resume_noirq(PMSG_RESTORE);
  Resume_devices:
-		device_pm_unlock();
-		device_resume(PMSG_RESTORE);
+		dpm_resume_end(PMSG_RESTORE);
  Resume_console:
 		resume_console();
 		thaw_processes();
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index e4dcfb2272a..9147a3190c9 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -1583,8 +1583,8 @@ static void sysrq_handle_gdb(int key, struct tty_struct *tty)
 
 static struct sysrq_key_op sysrq_gdb_op = {
 	.handler	= sysrq_handle_gdb,
-	.help_msg	= "Gdb",
-	.action_msg	= "GDB",
+	.help_msg	= "debug(G)",
+	.action_msg	= "DEBUG",
 };
 #endif
 
diff --git a/kernel/kmod.c b/kernel/kmod.c
index b750675251e..7e95bedb2bf 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -370,8 +370,10 @@ struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
 	sub_info->argv = argv;
 	sub_info->envp = envp;
 	sub_info->cred = prepare_usermodehelper_creds();
-	if (!sub_info->cred)
+	if (!sub_info->cred) {
+		kfree(sub_info);
 		return NULL;
+	}
 
   out:
 	return sub_info;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 4ebaf8519ab..41c88fe4050 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -13,7 +13,7 @@
 #include <linux/file.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
 
 #define KTHREAD_NICE_LEVEL (-5)
 
@@ -21,9 +21,6 @@ static DEFINE_SPINLOCK(kthread_create_lock);
 static LIST_HEAD(kthread_create_list);
 struct task_struct *kthreadd_task;
 
-DEFINE_TRACE(sched_kthread_stop);
-DEFINE_TRACE(sched_kthread_stop_ret);
-
 struct kthread_create_info
 {
 	/* Information passed to kthread() from kthreadd. */
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index accb40cdb12..8bbeef996c7 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -42,12 +42,14 @@
 #include <linux/hash.h>
 #include <linux/ftrace.h>
 #include <linux/stringify.h>
-#include <trace/lockdep.h>
 
 #include <asm/sections.h>
 
 #include "lockdep_internals.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/lockdep.h>
+
 #ifdef CONFIG_PROVE_LOCKING
 int prove_locking = 1;
 module_param(prove_locking, int, 0644);
@@ -2935,8 +2937,6 @@ void lock_set_class(struct lockdep_map *lock, const char *name,
 }
 EXPORT_SYMBOL_GPL(lock_set_class);
 
-DEFINE_TRACE(lock_acquire);
-
 /*
  * We are not always called with irqs disabled - do that here,
  * and also avoid lockdep recursion:
@@ -2963,8 +2963,6 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 }
 EXPORT_SYMBOL_GPL(lock_acquire);
 
-DEFINE_TRACE(lock_release);
-
 void lock_release(struct lockdep_map *lock, int nested,
 			  unsigned long ip)
 {
@@ -3105,6 +3103,8 @@ found_it:
 		hlock->holdtime_stamp = now;
 	}
 
+	trace_lock_acquired(lock, ip, waittime);
+
 	stats = get_lock_stats(hlock_class(hlock));
 	if (waittime) {
 		if (hlock->read)
@@ -3120,8 +3120,6 @@ found_it:
 	lock->ip = ip;
 }
 
-DEFINE_TRACE(lock_contended);
-
 void lock_contended(struct lockdep_map *lock, unsigned long ip)
 {
 	unsigned long flags;
@@ -3143,14 +3141,10 @@ void lock_contended(struct lockdep_map *lock, unsigned long ip)
 }
 EXPORT_SYMBOL_GPL(lock_contended);
 
-DEFINE_TRACE(lock_acquired);
-
 void lock_acquired(struct lockdep_map *lock, unsigned long ip)
 {
 	unsigned long flags;
 
-	trace_lock_acquired(lock, ip);
-
 	if (unlikely(!lock_stat))
 		return;
 
diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h
index a2cc7e9a6e8..699a2ac3a0d 100644
--- a/kernel/lockdep_internals.h
+++ b/kernel/lockdep_internals.h
@@ -54,9 +54,9 @@ enum {
  * table (if it's not there yet), and we check it for lock order
  * conflicts and deadlocks.
  */
-#define MAX_LOCKDEP_ENTRIES	8192UL
+#define MAX_LOCKDEP_ENTRIES	16384UL
 
-#define MAX_LOCKDEP_CHAINS_BITS	14
+#define MAX_LOCKDEP_CHAINS_BITS	15
 #define MAX_LOCKDEP_CHAINS	(1UL << MAX_LOCKDEP_CHAINS_BITS)
 
 #define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
diff --git a/kernel/module.c b/kernel/module.c
index e797812a4d9..e4ab36ce767 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -18,6 +18,7 @@
 */
 #include <linux/module.h>
 #include <linux/moduleloader.h>
+#include <linux/ftrace_event.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
 #include <linux/fs.h>
@@ -52,6 +53,7 @@
 #include <linux/ftrace.h>
 #include <linux/async.h>
 #include <linux/percpu.h>
+#include <linux/kmemleak.h>
 
 #if 0
 #define DEBUGP printk
@@ -72,6 +74,9 @@ DEFINE_MUTEX(module_mutex);
 EXPORT_SYMBOL_GPL(module_mutex);
 static LIST_HEAD(modules);
 
+/* Block module loading/unloading? */
+int modules_disabled = 0;
+
 /* Waiting for a module to finish initializing? */
 static DECLARE_WAIT_QUEUE_HEAD(module_wq);
 
@@ -429,6 +434,7 @@ static void *percpu_modalloc(unsigned long size, unsigned long align,
 	unsigned long extra;
 	unsigned int i;
 	void *ptr;
+	int cpu;
 
 	if (align > PAGE_SIZE) {
 		printk(KERN_WARNING "%s: per-cpu alignment %li > %li\n",
@@ -458,6 +464,11 @@ static void *percpu_modalloc(unsigned long size, unsigned long align,
 			if (!split_block(i, size))
 				return NULL;
 
+		/* add the per-cpu scanning areas */
+		for_each_possible_cpu(cpu)
+			kmemleak_alloc(ptr + per_cpu_offset(cpu), size, 0,
+				       GFP_KERNEL);
+
 		/* Mark allocated */
 		pcpu_size[i] = -pcpu_size[i];
 		return ptr;
@@ -472,6 +483,7 @@ static void percpu_modfree(void *freeme)
 {
 	unsigned int i;
 	void *ptr = __per_cpu_start + block_size(pcpu_size[0]);
+	int cpu;
 
 	/* First entry is core kernel percpu data. */
 	for (i = 1; i < pcpu_num_used; ptr += block_size(pcpu_size[i]), i++) {
@@ -483,6 +495,10 @@ static void percpu_modfree(void *freeme)
 	BUG();
 
  free:
+	/* remove the per-cpu scanning areas */
+	for_each_possible_cpu(cpu)
+		kmemleak_free(freeme + per_cpu_offset(cpu));
+
 	/* Merge with previous? */
 	if (pcpu_size[i-1] >= 0) {
 		pcpu_size[i-1] += pcpu_size[i];
@@ -777,7 +793,7 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
 	char name[MODULE_NAME_LEN];
 	int ret, forced = 0;
 
-	if (!capable(CAP_SYS_MODULE))
+	if (!capable(CAP_SYS_MODULE) || modules_disabled)
 		return -EPERM;
 
 	if (strncpy_from_user(name, name_user, MODULE_NAME_LEN-1) < 0)
@@ -1489,9 +1505,6 @@ static void free_module(struct module *mod)
 	/* Free any allocated parameters. */
 	destroy_params(mod->kp, mod->num_kp);
 
-	/* release any pointers to mcount in this module */
-	ftrace_release(mod->module_core, mod->core_size);
-
 	/* This may be NULL, but that's OK */
 	module_free(mod, mod->module_init);
 	kfree(mod->args);
@@ -1878,6 +1891,36 @@ static void *module_alloc_update_bounds(unsigned long size)
 	return ret;
 }
 
+#ifdef CONFIG_DEBUG_KMEMLEAK
+static void kmemleak_load_module(struct module *mod, Elf_Ehdr *hdr,
+				 Elf_Shdr *sechdrs, char *secstrings)
+{
+	unsigned int i;
+
+	/* only scan the sections containing data */
+	kmemleak_scan_area(mod->module_core, (unsigned long)mod -
+			   (unsigned long)mod->module_core,
+			   sizeof(struct module), GFP_KERNEL);
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+			continue;
+		if (strncmp(secstrings + sechdrs[i].sh_name, ".data", 5) != 0
+		    && strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) != 0)
+			continue;
+
+		kmemleak_scan_area(mod->module_core, sechdrs[i].sh_addr -
+				   (unsigned long)mod->module_core,
+				   sechdrs[i].sh_size, GFP_KERNEL);
+	}
+}
+#else
+static inline void kmemleak_load_module(struct module *mod, Elf_Ehdr *hdr,
+					Elf_Shdr *sechdrs, char *secstrings)
+{
+}
+#endif
+
 /* Allocate and load the module: note that size of section 0 is always
    zero, and we rely on this for optional sections. */
 static noinline struct module *load_module(void __user *umod,
@@ -1892,11 +1935,9 @@ static noinline struct module *load_module(void __user *umod,
 	unsigned int symindex = 0;
 	unsigned int strindex = 0;
 	unsigned int modindex, versindex, infoindex, pcpuindex;
-	unsigned int num_mcount;
 	struct module *mod;
 	long err = 0;
 	void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
-	unsigned long *mseg;
 	mm_segment_t old_fs;
 
 	DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
@@ -2050,6 +2091,12 @@ static noinline struct module *load_module(void __user *umod,
 
 	/* Do the allocs. */
 	ptr = module_alloc_update_bounds(mod->core_size);
+	/*
+	 * The pointer to this block is stored in the module structure
+	 * which is inside the block. Just mark it as not being a
+	 * leak.
+	 */
+	kmemleak_not_leak(ptr);
 	if (!ptr) {
 		err = -ENOMEM;
 		goto free_percpu;
@@ -2058,6 +2105,13 @@ static noinline struct module *load_module(void __user *umod,
 	mod->module_core = ptr;
 
 	ptr = module_alloc_update_bounds(mod->init_size);
+	/*
+	 * The pointer to this block is stored in the module structure
+	 * which is inside the block. This block doesn't need to be
+	 * scanned as it contains data and code that will be freed
+	 * after the module is initialized.
+	 */
+	kmemleak_ignore(ptr);
 	if (!ptr && mod->init_size) {
 		err = -ENOMEM;
 		goto free_core;
@@ -2088,6 +2142,7 @@ static noinline struct module *load_module(void __user *umod,
 	}
 	/* Module has been moved. */
 	mod = (void *)sechdrs[modindex].sh_addr;
+	kmemleak_load_module(mod, hdr, sechdrs, secstrings);
 
 #if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
 	mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
@@ -2172,7 +2227,19 @@ static noinline struct module *load_module(void __user *umod,
 					sizeof(*mod->tracepoints),
 					&mod->num_tracepoints);
 #endif
-
+#ifdef CONFIG_EVENT_TRACING
+	mod->trace_events = section_objs(hdr, sechdrs, secstrings,
+					 "_ftrace_events",
+					 sizeof(*mod->trace_events),
+					 &mod->num_trace_events);
+#endif
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+	/* sechdrs[0].sh_size is always zero */
+	mod->ftrace_callsites = section_objs(hdr, sechdrs, secstrings,
+					     "__mcount_loc",
+					     sizeof(*mod->ftrace_callsites),
+					     &mod->num_ftrace_callsites);
+#endif
 #ifdef CONFIG_MODVERSIONS
 	if ((mod->num_syms && !mod->crcs)
 	    || (mod->num_gpl_syms && !mod->gpl_crcs)
@@ -2237,11 +2304,6 @@ static noinline struct module *load_module(void __user *umod,
 			dynamic_debug_setup(debug, num_debug);
 	}
 
-	/* sechdrs[0].sh_size is always zero */
-	mseg = section_objs(hdr, sechdrs, secstrings, "__mcount_loc",
-			    sizeof(*mseg), &num_mcount);
-	ftrace_init_module(mod, mseg, mseg + num_mcount);
-
 	err = module_finalize(hdr, sechdrs, mod);
 	if (err < 0)
 		goto cleanup;
@@ -2302,7 +2364,6 @@ static noinline struct module *load_module(void __user *umod,
  cleanup:
 	kobject_del(&mod->mkobj.kobj);
 	kobject_put(&mod->mkobj.kobj);
-	ftrace_release(mod->module_core, mod->core_size);
  free_unload:
 	module_unload_free(mod);
 #if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
@@ -2336,7 +2397,7 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	int ret = 0;
 
 	/* Must have permission */
-	if (!capable(CAP_SYS_MODULE))
+	if (!capable(CAP_SYS_MODULE) || modules_disabled)
 		return -EPERM;
 
 	/* Only one module load at a time, please */
@@ -2394,6 +2455,7 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	mutex_lock(&module_mutex);
 	/* Drop initial reference. */
 	module_put(mod);
+	trim_init_extable(mod);
 	module_free(mod, mod->module_init);
 	mod->module_init = NULL;
 	mod->init_size = 0;
diff --git a/kernel/mutex.c b/kernel/mutex.c
index 507cf2b5e9f..947b3ad551f 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -89,7 +89,7 @@ __mutex_lock_slowpath(atomic_t *lock_count);
  *
  * This function is similar to (but not equivalent to) down().
  */
-void inline __sched mutex_lock(struct mutex *lock)
+void __sched mutex_lock(struct mutex *lock)
 {
 	might_sleep();
 	/*
@@ -249,7 +249,9 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 
 		/* didnt get the lock, go to sleep: */
 		spin_unlock_mutex(&lock->wait_lock, flags);
-		__schedule();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
 		spin_lock_mutex(&lock->wait_lock, flags);
 	}
 
@@ -471,5 +473,28 @@ int __sched mutex_trylock(struct mutex *lock)
 
 	return ret;
 }
-
 EXPORT_SYMBOL(mutex_trylock);
+
+/**
+ * atomic_dec_and_mutex_lock - return holding mutex if we dec to 0
+ * @cnt: the atomic which we are to dec
+ * @lock: the mutex to return holding if we dec to 0
+ *
+ * return true and hold lock if we dec to 0, return false otherwise
+ */
+int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock)
+{
+	/* dec if we can't possibly hit 0 */
+	if (atomic_add_unless(cnt, -1, 1))
+		return 0;
+	/* we might hit 0, so take the lock */
+	mutex_lock(lock);
+	if (!atomic_dec_and_test(cnt)) {
+		/* when we actually did the dec, we didn't hit 0 */
+		mutex_unlock(lock);
+		return 0;
+	}
+	/* we hit 0, and we hold the lock */
+	return 1;
+}
+EXPORT_SYMBOL(atomic_dec_and_mutex_lock);
diff --git a/kernel/panic.c b/kernel/panic.c
index 874ecf1307a..984b3ecbd72 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -340,39 +340,44 @@ void oops_exit(void)
 }
 
 #ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
-{
+struct slowpath_args {
+	const char *fmt;
 	va_list args;
-	char function[KSYM_SYMBOL_LEN];
-	unsigned long caller = (unsigned long)__builtin_return_address(0);
-	const char *board;
+};
 
-	sprint_symbol(function, caller);
+static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args)
+{
+	const char *board;
 
 	printk(KERN_WARNING "------------[ cut here ]------------\n");
-	printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
-		line, function);
+	printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller);
 	board = dmi_get_system_info(DMI_PRODUCT_NAME);
 	if (board)
 		printk(KERN_WARNING "Hardware name: %s\n", board);
 
-	if (*fmt) {
-		va_start(args, fmt);
-		vprintk(fmt, args);
-		va_end(args);
-	}
+	if (args)
+		vprintk(args->fmt, args->args);
 
 	print_modules();
 	dump_stack();
 	print_oops_end_marker();
 	add_taint(TAINT_WARN);
 }
+
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
+{
+	struct slowpath_args args;
+
+	args.fmt = fmt;
+	va_start(args.args, fmt);
+	warn_slowpath_common(file, line, __builtin_return_address(0), &args);
+	va_end(args.args);
+}
 EXPORT_SYMBOL(warn_slowpath_fmt);
 
 void warn_slowpath_null(const char *file, int line)
 {
-	static const char *empty = "";
-	warn_slowpath_fmt(file, line, empty);
+	warn_slowpath_common(file, line, __builtin_return_address(0), NULL);
 }
 EXPORT_SYMBOL(warn_slowpath_null);
 #endif
diff --git a/kernel/params.c b/kernel/params.c
index de273ec85bd..7f6912ced2b 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -24,9 +24,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-/* We abuse the high bits of "perm" to record whether we kmalloc'ed. */
-#define KPARAM_KMALLOCED	0x80000000
-
 #if 0
 #define DEBUGP printk
 #else
@@ -220,13 +217,13 @@ int param_set_charp(const char *val, struct kernel_param *kp)
 		return -ENOSPC;
 	}
 
-	if (kp->perm & KPARAM_KMALLOCED)
+	if (kp->flags & KPARAM_KMALLOCED)
 		kfree(*(char **)kp->arg);
 
 	/* This is a hack.  We can't need to strdup in early boot, and we
 	 * don't need to; this mangled commandline is preserved. */
 	if (slab_is_available()) {
-		kp->perm |= KPARAM_KMALLOCED;
+		kp->flags |= KPARAM_KMALLOCED;
 		*(char **)kp->arg = kstrdup(val, GFP_KERNEL);
 		if (!kp->arg)
 			return -ENOMEM;
@@ -241,44 +238,63 @@ int param_get_charp(char *buffer, struct kernel_param *kp)
 	return sprintf(buffer, "%s", *((char **)kp->arg));
 }
 
+/* Actually could be a bool or an int, for historical reasons. */
 int param_set_bool(const char *val, struct kernel_param *kp)
 {
+	bool v;
+
 	/* No equals means "set"... */
 	if (!val) val = "1";
 
 	/* One of =[yYnN01] */
 	switch (val[0]) {
 	case 'y': case 'Y': case '1':
-		*(int *)kp->arg = 1;
-		return 0;
+		v = true;
+		break;
 	case 'n': case 'N': case '0':
-		*(int *)kp->arg = 0;
-		return 0;
+		v = false;
+		break;
+	default:
+		return -EINVAL;
 	}
-	return -EINVAL;
+
+	if (kp->flags & KPARAM_ISBOOL)
+		*(bool *)kp->arg = v;
+	else
+		*(int *)kp->arg = v;
+	return 0;
 }
 
 int param_get_bool(char *buffer, struct kernel_param *kp)
 {
+	bool val;
+	if (kp->flags & KPARAM_ISBOOL)
+		val = *(bool *)kp->arg;
+	else
+		val = *(int *)kp->arg;
+
 	/* Y and N chosen as being relatively non-coder friendly */
-	return sprintf(buffer, "%c", (*(int *)kp->arg) ? 'Y' : 'N');
+	return sprintf(buffer, "%c", val ? 'Y' : 'N');
 }
 
+/* This one must be bool. */
 int param_set_invbool(const char *val, struct kernel_param *kp)
 {
-	int boolval, ret;
+	int ret;
+	bool boolval;
 	struct kernel_param dummy;
 
 	dummy.arg = &boolval;
+	dummy.flags = KPARAM_ISBOOL;
 	ret = param_set_bool(val, &dummy);
 	if (ret == 0)
-		*(int *)kp->arg = !boolval;
+		*(bool *)kp->arg = !boolval;
 	return ret;
 }
 
 int param_get_invbool(char *buffer, struct kernel_param *kp)
 {
-	return sprintf(buffer, "%c", (*(int *)kp->arg) ? 'N' : 'Y');
+	return sprintf(buffer, "%c", (*(bool *)kp->arg) ? 'N' : 'Y');
 }
 
 /* We break the rule and mangle the string. */
@@ -591,7 +607,7 @@ void destroy_params(const struct kernel_param *params, unsigned num)
 	unsigned int i;
 
 	for (i = 0; i < num; i++)
-		if (params[i].perm & KPARAM_KMALLOCED)
+		if (params[i].flags & KPARAM_KMALLOCED)
 			kfree(*(char **)params[i].arg);
 }
 
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
new file mode 100644
index 00000000000..29b685f551a
--- /dev/null
+++ b/kernel/perf_counter.c
@@ -0,0 +1,4339 @@
+/*
+ * Performance counter core code
+ *
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright  ©  2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ *  For licensing details see kernel-base/COPYING
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/file.h>
+#include <linux/poll.h>
+#include <linux/sysfs.h>
+#include <linux/dcache.h>
+#include <linux/percpu.h>
+#include <linux/ptrace.h>
+#include <linux/vmstat.h>
+#include <linux/hardirq.h>
+#include <linux/rculist.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <linux/anon_inodes.h>
+#include <linux/kernel_stat.h>
+#include <linux/perf_counter.h>
+
+#include <asm/irq_regs.h>
+
+/*
+ * Each CPU has a list of per CPU counters:
+ */
+DEFINE_PER_CPU(struct perf_cpu_context, perf_cpu_context);
+
+int perf_max_counters __read_mostly = 1;
+static int perf_reserved_percpu __read_mostly;
+static int perf_overcommit __read_mostly = 1;
+
+static atomic_t nr_counters __read_mostly;
+static atomic_t nr_mmap_counters __read_mostly;
+static atomic_t nr_comm_counters __read_mostly;
+
+/*
+ * perf counter paranoia level:
+ *  0 - not paranoid
+ *  1 - disallow cpu counters to unpriv
+ *  2 - disallow kernel profiling to unpriv
+ */
+int sysctl_perf_counter_paranoid __read_mostly;
+
+static inline bool perf_paranoid_cpu(void)
+{
+	return sysctl_perf_counter_paranoid > 0;
+}
+
+static inline bool perf_paranoid_kernel(void)
+{
+	return sysctl_perf_counter_paranoid > 1;
+}
+
+int sysctl_perf_counter_mlock __read_mostly = 512; /* 'free' kb per user */
+
+/*
+ * max perf counter sample rate
+ */
+int sysctl_perf_counter_sample_rate __read_mostly = 100000;
+
+static atomic64_t perf_counter_id;
+
+/*
+ * Lock for (sysadmin-configurable) counter reservations:
+ */
+static DEFINE_SPINLOCK(perf_resource_lock);
+
+/*
+ * Architecture provided APIs - weak aliases:
+ */
+extern __weak const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
+{
+	return NULL;
+}
+
+void __weak hw_perf_disable(void)		{ barrier(); }
+void __weak hw_perf_enable(void)		{ barrier(); }
+
+void __weak hw_perf_counter_setup(int cpu)	{ barrier(); }
+
+int __weak
+hw_perf_group_sched_in(struct perf_counter *group_leader,
+	       struct perf_cpu_context *cpuctx,
+	       struct perf_counter_context *ctx, int cpu)
+{
+	return 0;
+}
+
+void __weak perf_counter_print_debug(void)	{ }
+
+static DEFINE_PER_CPU(int, disable_count);
+
+void __perf_disable(void)
+{
+	__get_cpu_var(disable_count)++;
+}
+
+bool __perf_enable(void)
+{
+	return !--__get_cpu_var(disable_count);
+}
+
+void perf_disable(void)
+{
+	__perf_disable();
+	hw_perf_disable();
+}
+
+void perf_enable(void)
+{
+	if (__perf_enable())
+		hw_perf_enable();
+}
+
+static void get_ctx(struct perf_counter_context *ctx)
+{
+	atomic_inc(&ctx->refcount);
+}
+
+static void free_ctx(struct rcu_head *head)
+{
+	struct perf_counter_context *ctx;
+
+	ctx = container_of(head, struct perf_counter_context, rcu_head);
+	kfree(ctx);
+}
+
+static void put_ctx(struct perf_counter_context *ctx)
+{
+	if (atomic_dec_and_test(&ctx->refcount)) {
+		if (ctx->parent_ctx)
+			put_ctx(ctx->parent_ctx);
+		if (ctx->task)
+			put_task_struct(ctx->task);
+		call_rcu(&ctx->rcu_head, free_ctx);
+	}
+}
+
+/*
+ * Get the perf_counter_context for a task and lock it.
+ * This has to cope with with the fact that until it is locked,
+ * the context could get moved to another task.
+ */
+static struct perf_counter_context *
+perf_lock_task_context(struct task_struct *task, unsigned long *flags)
+{
+	struct perf_counter_context *ctx;
+
+	rcu_read_lock();
+ retry:
+	ctx = rcu_dereference(task->perf_counter_ctxp);
+	if (ctx) {
+		/*
+		 * If this context is a clone of another, it might
+		 * get swapped for another underneath us by
+		 * perf_counter_task_sched_out, though the
+		 * rcu_read_lock() protects us from any context
+		 * getting freed.  Lock the context and check if it
+		 * got swapped before we could get the lock, and retry
+		 * if so.  If we locked the right context, then it
+		 * can't get swapped on us any more.
+		 */
+		spin_lock_irqsave(&ctx->lock, *flags);
+		if (ctx != rcu_dereference(task->perf_counter_ctxp)) {
+			spin_unlock_irqrestore(&ctx->lock, *flags);
+			goto retry;
+		}
+	}
+	rcu_read_unlock();
+	return ctx;
+}
+
+/*
+ * Get the context for a task and increment its pin_count so it
+ * can't get swapped to another task.  This also increments its
+ * reference count so that the context can't get freed.
+ */
+static struct perf_counter_context *perf_pin_task_context(struct task_struct *task)
+{
+	struct perf_counter_context *ctx;
+	unsigned long flags;
+
+	ctx = perf_lock_task_context(task, &flags);
+	if (ctx) {
+		++ctx->pin_count;
+		get_ctx(ctx);
+		spin_unlock_irqrestore(&ctx->lock, flags);
+	}
+	return ctx;
+}
+
+static void perf_unpin_context(struct perf_counter_context *ctx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctx->lock, flags);
+	--ctx->pin_count;
+	spin_unlock_irqrestore(&ctx->lock, flags);
+	put_ctx(ctx);
+}
+
+/*
+ * Add a counter from the lists for its context.
+ * Must be called with ctx->mutex and ctx->lock held.
+ */
+static void
+list_add_counter(struct perf_counter *counter, struct perf_counter_context *ctx)
+{
+	struct perf_counter *group_leader = counter->group_leader;
+
+	/*
+	 * Depending on whether it is a standalone or sibling counter,
+	 * add it straight to the context's counter list, or to the group
+	 * leader's sibling list:
+	 */
+	if (group_leader == counter)
+		list_add_tail(&counter->list_entry, &ctx->counter_list);
+	else {
+		list_add_tail(&counter->list_entry, &group_leader->sibling_list);
+		group_leader->nr_siblings++;
+	}
+
+	list_add_rcu(&counter->event_entry, &ctx->event_list);
+	ctx->nr_counters++;
+}
+
+/*
+ * Remove a counter from the lists for its context.
+ * Must be called with ctx->mutex and ctx->lock held.
+ */
+static void
+list_del_counter(struct perf_counter *counter, struct perf_counter_context *ctx)
+{
+	struct perf_counter *sibling, *tmp;
+
+	if (list_empty(&counter->list_entry))
+		return;
+	ctx->nr_counters--;
+
+	list_del_init(&counter->list_entry);
+	list_del_rcu(&counter->event_entry);
+
+	if (counter->group_leader != counter)
+		counter->group_leader->nr_siblings--;
+
+	/*
+	 * If this was a group counter with sibling counters then
+	 * upgrade the siblings to singleton counters by adding them
+	 * to the context list directly:
+	 */
+	list_for_each_entry_safe(sibling, tmp,
+				 &counter->sibling_list, list_entry) {
+
+		list_move_tail(&sibling->list_entry, &ctx->counter_list);
+		sibling->group_leader = sibling;
+	}
+}
+
+static void
+counter_sched_out(struct perf_counter *counter,
+		  struct perf_cpu_context *cpuctx,
+		  struct perf_counter_context *ctx)
+{
+	if (counter->state != PERF_COUNTER_STATE_ACTIVE)
+		return;
+
+	counter->state = PERF_COUNTER_STATE_INACTIVE;
+	counter->tstamp_stopped = ctx->time;
+	counter->pmu->disable(counter);
+	counter->oncpu = -1;
+
+	if (!is_software_counter(counter))
+		cpuctx->active_oncpu--;
+	ctx->nr_active--;
+	if (counter->attr.exclusive || !cpuctx->active_oncpu)
+		cpuctx->exclusive = 0;
+}
+
+static void
+group_sched_out(struct perf_counter *group_counter,
+		struct perf_cpu_context *cpuctx,
+		struct perf_counter_context *ctx)
+{
+	struct perf_counter *counter;
+
+	if (group_counter->state != PERF_COUNTER_STATE_ACTIVE)
+		return;
+
+	counter_sched_out(group_counter, cpuctx, ctx);
+
+	/*
+	 * Schedule out siblings (if any):
+	 */
+	list_for_each_entry(counter, &group_counter->sibling_list, list_entry)
+		counter_sched_out(counter, cpuctx, ctx);
+
+	if (group_counter->attr.exclusive)
+		cpuctx->exclusive = 0;
+}
+
+/*
+ * Cross CPU call to remove a performance counter
+ *
+ * We disable the counter on the hardware level first. After that we
+ * remove it from the context list.
+ */
+static void __perf_counter_remove_from_context(void *info)
+{
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+	struct perf_counter *counter = info;
+	struct perf_counter_context *ctx = counter->ctx;
+
+	/*
+	 * If this is a task context, we need to check whether it is
+	 * the current task context of this cpu. If not it has been
+	 * scheduled out before the smp call arrived.
+	 */
+	if (ctx->task && cpuctx->task_ctx != ctx)
+		return;
+
+	spin_lock(&ctx->lock);
+	/*
+	 * Protect the list operation against NMI by disabling the
+	 * counters on a global level.
+	 */
+	perf_disable();
+
+	counter_sched_out(counter, cpuctx, ctx);
+
+	list_del_counter(counter, ctx);
+
+	if (!ctx->task) {
+		/*
+		 * Allow more per task counters with respect to the
+		 * reservation:
+		 */
+		cpuctx->max_pertask =
+			min(perf_max_counters - ctx->nr_counters,
+			    perf_max_counters - perf_reserved_percpu);
+	}
+
+	perf_enable();
+	spin_unlock(&ctx->lock);
+}
+
+
+/*
+ * Remove the counter from a task's (or a CPU's) list of counters.
+ *
+ * Must be called with ctx->mutex held.
+ *
+ * CPU counters are removed with a smp call. For task counters we only
+ * call when the task is on a CPU.
+ *
+ * If counter->ctx is a cloned context, callers must make sure that
+ * every task struct that counter->ctx->task could possibly point to
+ * remains valid.  This is OK when called from perf_release since
+ * that only calls us on the top-level context, which can't be a clone.
+ * When called from perf_counter_exit_task, it's OK because the
+ * context has been detached from its task.
+ */
+static void perf_counter_remove_from_context(struct perf_counter *counter)
+{
+	struct perf_counter_context *ctx = counter->ctx;
+	struct task_struct *task = ctx->task;
+
+	if (!task) {
+		/*
+		 * Per cpu counters are removed via an smp call and
+		 * the removal is always sucessful.
+		 */
+		smp_call_function_single(counter->cpu,
+					 __perf_counter_remove_from_context,
+					 counter, 1);
+		return;
+	}
+
+retry:
+	task_oncpu_function_call(task, __perf_counter_remove_from_context,
+				 counter);
+
+	spin_lock_irq(&ctx->lock);
+	/*
+	 * If the context is active we need to retry the smp call.
+	 */
+	if (ctx->nr_active && !list_empty(&counter->list_entry)) {
+		spin_unlock_irq(&ctx->lock);
+		goto retry;
+	}
+
+	/*
+	 * The lock prevents that this context is scheduled in so we
+	 * can remove the counter safely, if the call above did not
+	 * succeed.
+	 */
+	if (!list_empty(&counter->list_entry)) {
+		list_del_counter(counter, ctx);
+	}
+	spin_unlock_irq(&ctx->lock);
+}
+
+static inline u64 perf_clock(void)
+{
+	return cpu_clock(smp_processor_id());
+}
+
+/*
+ * Update the record of the current time in a context.
+ */
+static void update_context_time(struct perf_counter_context *ctx)
+{
+	u64 now = perf_clock();
+
+	ctx->time += now - ctx->timestamp;
+	ctx->timestamp = now;
+}
+
+/*
+ * Update the total_time_enabled and total_time_running fields for a counter.
+ */
+static void update_counter_times(struct perf_counter *counter)
+{
+	struct perf_counter_context *ctx = counter->ctx;
+	u64 run_end;
+
+	if (counter->state < PERF_COUNTER_STATE_INACTIVE)
+		return;
+
+	counter->total_time_enabled = ctx->time - counter->tstamp_enabled;
+
+	if (counter->state == PERF_COUNTER_STATE_INACTIVE)
+		run_end = counter->tstamp_stopped;
+	else
+		run_end = ctx->time;
+
+	counter->total_time_running = run_end - counter->tstamp_running;
+}
+
+/*
+ * Update total_time_enabled and total_time_running for all counters in a group.
+ */
+static void update_group_times(struct perf_counter *leader)
+{
+	struct perf_counter *counter;
+
+	update_counter_times(leader);
+	list_for_each_entry(counter, &leader->sibling_list, list_entry)
+		update_counter_times(counter);
+}
+
+/*
+ * Cross CPU call to disable a performance counter
+ */
+static void __perf_counter_disable(void *info)
+{
+	struct perf_counter *counter = info;
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+	struct perf_counter_context *ctx = counter->ctx;
+
+	/*
+	 * If this is a per-task counter, need to check whether this
+	 * counter's task is the current task on this cpu.
+	 */
+	if (ctx->task && cpuctx->task_ctx != ctx)
+		return;
+
+	spin_lock(&ctx->lock);
+
+	/*
+	 * If the counter is on, turn it off.
+	 * If it is in error state, leave it in error state.
+	 */
+	if (counter->state >= PERF_COUNTER_STATE_INACTIVE) {
+		update_context_time(ctx);
+		update_counter_times(counter);
+		if (counter == counter->group_leader)
+			group_sched_out(counter, cpuctx, ctx);
+		else
+			counter_sched_out(counter, cpuctx, ctx);
+		counter->state = PERF_COUNTER_STATE_OFF;
+	}
+
+	spin_unlock(&ctx->lock);
+}
+
+/*
+ * Disable a counter.
+ *
+ * If counter->ctx is a cloned context, callers must make sure that
+ * every task struct that counter->ctx->task could possibly point to
+ * remains valid.  This condition is satisifed when called through
+ * perf_counter_for_each_child or perf_counter_for_each because they
+ * hold the top-level counter's child_mutex, so any descendant that
+ * goes to exit will block in sync_child_counter.
+ * When called from perf_pending_counter it's OK because counter->ctx
+ * is the current context on this CPU and preemption is disabled,
+ * hence we can't get into perf_counter_task_sched_out for this context.
+ */
+static void perf_counter_disable(struct perf_counter *counter)
+{
+	struct perf_counter_context *ctx = counter->ctx;
+	struct task_struct *task = ctx->task;
+
+	if (!task) {
+		/*
+		 * Disable the counter on the cpu that it's on
+		 */
+		smp_call_function_single(counter->cpu, __perf_counter_disable,
+					 counter, 1);
+		return;
+	}
+
+ retry:
+	task_oncpu_function_call(task, __perf_counter_disable, counter);
+
+	spin_lock_irq(&ctx->lock);
+	/*
+	 * If the counter is still active, we need to retry the cross-call.
+	 */
+	if (counter->state == PERF_COUNTER_STATE_ACTIVE) {
+		spin_unlock_irq(&ctx->lock);
+		goto retry;
+	}
+
+	/*
+	 * Since we have the lock this context can't be scheduled
+	 * in, so we can change the state safely.
+	 */
+	if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
+		update_counter_times(counter);
+		counter->state = PERF_COUNTER_STATE_OFF;
+	}
+
+	spin_unlock_irq(&ctx->lock);
+}
+
+static int
+counter_sched_in(struct perf_counter *counter,
+		 struct perf_cpu_context *cpuctx,
+		 struct perf_counter_context *ctx,
+		 int cpu)
+{
+	if (counter->state <= PERF_COUNTER_STATE_OFF)
+		return 0;
+
+	counter->state = PERF_COUNTER_STATE_ACTIVE;
+	counter->oncpu = cpu;	/* TODO: put 'cpu' into cpuctx->cpu */
+	/*
+	 * The new state must be visible before we turn it on in the hardware:
+	 */
+	smp_wmb();
+
+	if (counter->pmu->enable(counter)) {
+		counter->state = PERF_COUNTER_STATE_INACTIVE;
+		counter->oncpu = -1;
+		return -EAGAIN;
+	}
+
+	counter->tstamp_running += ctx->time - counter->tstamp_stopped;
+
+	if (!is_software_counter(counter))
+		cpuctx->active_oncpu++;
+	ctx->nr_active++;
+
+	if (counter->attr.exclusive)
+		cpuctx->exclusive = 1;
+
+	return 0;
+}
+
+static int
+group_sched_in(struct perf_counter *group_counter,
+	       struct perf_cpu_context *cpuctx,
+	       struct perf_counter_context *ctx,
+	       int cpu)
+{
+	struct perf_counter *counter, *partial_group;
+	int ret;
+
+	if (group_counter->state == PERF_COUNTER_STATE_OFF)
+		return 0;
+
+	ret = hw_perf_group_sched_in(group_counter, cpuctx, ctx, cpu);
+	if (ret)
+		return ret < 0 ? ret : 0;
+
+	if (counter_sched_in(group_counter, cpuctx, ctx, cpu))
+		return -EAGAIN;
+
+	/*
+	 * Schedule in siblings as one group (if any):
+	 */
+	list_for_each_entry(counter, &group_counter->sibling_list, list_entry) {
+		if (counter_sched_in(counter, cpuctx, ctx, cpu)) {
+			partial_group = counter;
+			goto group_error;
+		}
+	}
+
+	return 0;
+
+group_error:
+	/*
+	 * Groups can be scheduled in as one unit only, so undo any
+	 * partial group before returning:
+	 */
+	list_for_each_entry(counter, &group_counter->sibling_list, list_entry) {
+		if (counter == partial_group)
+			break;
+		counter_sched_out(counter, cpuctx, ctx);
+	}
+	counter_sched_out(group_counter, cpuctx, ctx);
+
+	return -EAGAIN;
+}
+
+/*
+ * Return 1 for a group consisting entirely of software counters,
+ * 0 if the group contains any hardware counters.
+ */
+static int is_software_only_group(struct perf_counter *leader)
+{
+	struct perf_counter *counter;
+
+	if (!is_software_counter(leader))
+		return 0;
+
+	list_for_each_entry(counter, &leader->sibling_list, list_entry)
+		if (!is_software_counter(counter))
+			return 0;
+
+	return 1;
+}
+
+/*
+ * Work out whether we can put this counter group on the CPU now.
+ */
+static int group_can_go_on(struct perf_counter *counter,
+			   struct perf_cpu_context *cpuctx,
+			   int can_add_hw)
+{
+	/*
+	 * Groups consisting entirely of software counters can always go on.
+	 */
+	if (is_software_only_group(counter))
+		return 1;
+	/*
+	 * If an exclusive group is already on, no other hardware
+	 * counters can go on.
+	 */
+	if (cpuctx->exclusive)
+		return 0;
+	/*
+	 * If this group is exclusive and there are already
+	 * counters on the CPU, it can't go on.
+	 */
+	if (counter->attr.exclusive && cpuctx->active_oncpu)
+		return 0;
+	/*
+	 * Otherwise, try to add it if all previous groups were able
+	 * to go on.
+	 */
+	return can_add_hw;
+}
+
+static void add_counter_to_ctx(struct perf_counter *counter,
+			       struct perf_counter_context *ctx)
+{
+	list_add_counter(counter, ctx);
+	counter->tstamp_enabled = ctx->time;
+	counter->tstamp_running = ctx->time;
+	counter->tstamp_stopped = ctx->time;
+}
+
+/*
+ * Cross CPU call to install and enable a performance counter
+ *
+ * Must be called with ctx->mutex held
+ */
+static void __perf_install_in_context(void *info)
+{
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+	struct perf_counter *counter = info;
+	struct perf_counter_context *ctx = counter->ctx;
+	struct perf_counter *leader = counter->group_leader;
+	int cpu = smp_processor_id();
+	int err;
+
+	/*
+	 * If this is a task context, we need to check whether it is
+	 * the current task context of this cpu. If not it has been
+	 * scheduled out before the smp call arrived.
+	 * Or possibly this is the right context but it isn't
+	 * on this cpu because it had no counters.
+	 */
+	if (ctx->task && cpuctx->task_ctx != ctx) {
+		if (cpuctx->task_ctx || ctx->task != current)
+			return;
+		cpuctx->task_ctx = ctx;
+	}
+
+	spin_lock(&ctx->lock);
+	ctx->is_active = 1;
+	update_context_time(ctx);
+
+	/*
+	 * Protect the list operation against NMI by disabling the
+	 * counters on a global level. NOP for non NMI based counters.
+	 */
+	perf_disable();
+
+	add_counter_to_ctx(counter, ctx);
+
+	/*
+	 * Don't put the counter on if it is disabled or if
+	 * it is in a group and the group isn't on.
+	 */
+	if (counter->state != PERF_COUNTER_STATE_INACTIVE ||
+	    (leader != counter && leader->state != PERF_COUNTER_STATE_ACTIVE))
+		goto unlock;
+
+	/*
+	 * An exclusive counter can't go on if there are already active
+	 * hardware counters, and no hardware counter can go on if there
+	 * is already an exclusive counter on.
+	 */
+	if (!group_can_go_on(counter, cpuctx, 1))
+		err = -EEXIST;
+	else
+		err = counter_sched_in(counter, cpuctx, ctx, cpu);
+
+	if (err) {
+		/*
+		 * This counter couldn't go on.  If it is in a group
+		 * then we have to pull the whole group off.
+		 * If the counter group is pinned then put it in error state.
+		 */
+		if (leader != counter)
+			group_sched_out(leader, cpuctx, ctx);
+		if (leader->attr.pinned) {
+			update_group_times(leader);
+			leader->state = PERF_COUNTER_STATE_ERROR;
+		}
+	}
+
+	if (!err && !ctx->task && cpuctx->max_pertask)
+		cpuctx->max_pertask--;
+
+ unlock:
+	perf_enable();
+
+	spin_unlock(&ctx->lock);
+}
+
+/*
+ * Attach a performance counter to a context
+ *
+ * First we add the counter to the list with the hardware enable bit
+ * in counter->hw_config cleared.
+ *
+ * If the counter is attached to a task which is on a CPU we use a smp
+ * call to enable it in the task context. The task might have been
+ * scheduled away, but we check this in the smp call again.
+ *
+ * Must be called with ctx->mutex held.
+ */
+static void
+perf_install_in_context(struct perf_counter_context *ctx,
+			struct perf_counter *counter,
+			int cpu)
+{
+	struct task_struct *task = ctx->task;
+
+	if (!task) {
+		/*
+		 * Per cpu counters are installed via an smp call and
+		 * the install is always sucessful.
+		 */
+		smp_call_function_single(cpu, __perf_install_in_context,
+					 counter, 1);
+		return;
+	}
+
+retry:
+	task_oncpu_function_call(task, __perf_install_in_context,
+				 counter);
+
+	spin_lock_irq(&ctx->lock);
+	/*
+	 * we need to retry the smp call.
+	 */
+	if (ctx->is_active && list_empty(&counter->list_entry)) {
+		spin_unlock_irq(&ctx->lock);
+		goto retry;
+	}
+
+	/*
+	 * The lock prevents that this context is scheduled in so we
+	 * can add the counter safely, if it the call above did not
+	 * succeed.
+	 */
+	if (list_empty(&counter->list_entry))
+		add_counter_to_ctx(counter, ctx);
+	spin_unlock_irq(&ctx->lock);
+}
+
+/*
+ * Cross CPU call to enable a performance counter
+ */
+static void __perf_counter_enable(void *info)
+{
+	struct perf_counter *counter = info;
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+	struct perf_counter_context *ctx = counter->ctx;
+	struct perf_counter *leader = counter->group_leader;
+	int err;
+
+	/*
+	 * If this is a per-task counter, need to check whether this
+	 * counter's task is the current task on this cpu.
+	 */
+	if (ctx->task && cpuctx->task_ctx != ctx) {
+		if (cpuctx->task_ctx || ctx->task != current)
+			return;
+		cpuctx->task_ctx = ctx;
+	}
+
+	spin_lock(&ctx->lock);
+	ctx->is_active = 1;
+	update_context_time(ctx);
+
+	if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
+		goto unlock;
+	counter->state = PERF_COUNTER_STATE_INACTIVE;
+	counter->tstamp_enabled = ctx->time - counter->total_time_enabled;
+
+	/*
+	 * If the counter is in a group and isn't the group leader,
+	 * then don't put it on unless the group is on.
+	 */
+	if (leader != counter && leader->state != PERF_COUNTER_STATE_ACTIVE)
+		goto unlock;
+
+	if (!group_can_go_on(counter, cpuctx, 1)) {
+		err = -EEXIST;
+	} else {
+		perf_disable();
+		if (counter == leader)
+			err = group_sched_in(counter, cpuctx, ctx,
+					     smp_processor_id());
+		else
+			err = counter_sched_in(counter, cpuctx, ctx,
+					       smp_processor_id());
+		perf_enable();
+	}
+
+	if (err) {
+		/*
+		 * If this counter can't go on and it's part of a
+		 * group, then the whole group has to come off.
+		 */
+		if (leader != counter)
+			group_sched_out(leader, cpuctx, ctx);
+		if (leader->attr.pinned) {
+			update_group_times(leader);
+			leader->state = PERF_COUNTER_STATE_ERROR;
+		}
+	}
+
+ unlock:
+	spin_unlock(&ctx->lock);
+}
+
+/*
+ * Enable a counter.
+ *
+ * If counter->ctx is a cloned context, callers must make sure that
+ * every task struct that counter->ctx->task could possibly point to
+ * remains valid.  This condition is satisfied when called through
+ * perf_counter_for_each_child or perf_counter_for_each as described
+ * for perf_counter_disable.
+ */
+static void perf_counter_enable(struct perf_counter *counter)
+{
+	struct perf_counter_context *ctx = counter->ctx;
+	struct task_struct *task = ctx->task;
+
+	if (!task) {
+		/*
+		 * Enable the counter on the cpu that it's on
+		 */
+		smp_call_function_single(counter->cpu, __perf_counter_enable,
+					 counter, 1);
+		return;
+	}
+
+	spin_lock_irq(&ctx->lock);
+	if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
+		goto out;
+
+	/*
+	 * If the counter is in error state, clear that first.
+	 * That way, if we see the counter in error state below, we
+	 * know that it has gone back into error state, as distinct
+	 * from the task having been scheduled away before the
+	 * cross-call arrived.
+	 */
+	if (counter->state == PERF_COUNTER_STATE_ERROR)
+		counter->state = PERF_COUNTER_STATE_OFF;
+
+ retry:
+	spin_unlock_irq(&ctx->lock);
+	task_oncpu_function_call(task, __perf_counter_enable, counter);
+
+	spin_lock_irq(&ctx->lock);
+
+	/*
+	 * If the context is active and the counter is still off,
+	 * we need to retry the cross-call.
+	 */
+	if (ctx->is_active && counter->state == PERF_COUNTER_STATE_OFF)
+		goto retry;
+
+	/*
+	 * Since we have the lock this context can't be scheduled
+	 * in, so we can change the state safely.
+	 */
+	if (counter->state == PERF_COUNTER_STATE_OFF) {
+		counter->state = PERF_COUNTER_STATE_INACTIVE;
+		counter->tstamp_enabled =
+			ctx->time - counter->total_time_enabled;
+	}
+ out:
+	spin_unlock_irq(&ctx->lock);
+}
+
+static int perf_counter_refresh(struct perf_counter *counter, int refresh)
+{
+	/*
+	 * not supported on inherited counters
+	 */
+	if (counter->attr.inherit)
+		return -EINVAL;
+
+	atomic_add(refresh, &counter->event_limit);
+	perf_counter_enable(counter);
+
+	return 0;
+}
+
+void __perf_counter_sched_out(struct perf_counter_context *ctx,
+			      struct perf_cpu_context *cpuctx)
+{
+	struct perf_counter *counter;
+
+	spin_lock(&ctx->lock);
+	ctx->is_active = 0;
+	if (likely(!ctx->nr_counters))
+		goto out;
+	update_context_time(ctx);
+
+	perf_disable();
+	if (ctx->nr_active) {
+		list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+			if (counter != counter->group_leader)
+				counter_sched_out(counter, cpuctx, ctx);
+			else
+				group_sched_out(counter, cpuctx, ctx);
+		}
+	}
+	perf_enable();
+ out:
+	spin_unlock(&ctx->lock);
+}
+
+/*
+ * Test whether two contexts are equivalent, i.e. whether they
+ * have both been cloned from the same version of the same context
+ * and they both have the same number of enabled counters.
+ * If the number of enabled counters is the same, then the set
+ * of enabled counters should be the same, because these are both
+ * inherited contexts, therefore we can't access individual counters
+ * in them directly with an fd; we can only enable/disable all
+ * counters via prctl, or enable/disable all counters in a family
+ * via ioctl, which will have the same effect on both contexts.
+ */
+static int context_equiv(struct perf_counter_context *ctx1,
+			 struct perf_counter_context *ctx2)
+{
+	return ctx1->parent_ctx && ctx1->parent_ctx == ctx2->parent_ctx
+		&& ctx1->parent_gen == ctx2->parent_gen
+		&& !ctx1->pin_count && !ctx2->pin_count;
+}
+
+/*
+ * Called from scheduler to remove the counters of the current task,
+ * with interrupts disabled.
+ *
+ * We stop each counter and update the counter value in counter->count.
+ *
+ * This does not protect us against NMI, but disable()
+ * sets the disabled bit in the control field of counter _before_
+ * accessing the counter control register. If a NMI hits, then it will
+ * not restart the counter.
+ */
+void perf_counter_task_sched_out(struct task_struct *task,
+				 struct task_struct *next, int cpu)
+{
+	struct perf_cpu_context *cpuctx = &per_cpu(perf_cpu_context, cpu);
+	struct perf_counter_context *ctx = task->perf_counter_ctxp;
+	struct perf_counter_context *next_ctx;
+	struct perf_counter_context *parent;
+	struct pt_regs *regs;
+	int do_switch = 1;
+
+	regs = task_pt_regs(task);
+	perf_swcounter_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, regs, 0);
+
+	if (likely(!ctx || !cpuctx->task_ctx))
+		return;
+
+	update_context_time(ctx);
+
+	rcu_read_lock();
+	parent = rcu_dereference(ctx->parent_ctx);
+	next_ctx = next->perf_counter_ctxp;
+	if (parent && next_ctx &&
+	    rcu_dereference(next_ctx->parent_ctx) == parent) {
+		/*
+		 * Looks like the two contexts are clones, so we might be
+		 * able to optimize the context switch.  We lock both
+		 * contexts and check that they are clones under the
+		 * lock (including re-checking that neither has been
+		 * uncloned in the meantime).  It doesn't matter which
+		 * order we take the locks because no other cpu could
+		 * be trying to lock both of these tasks.
+		 */
+		spin_lock(&ctx->lock);
+		spin_lock_nested(&next_ctx->lock, SINGLE_DEPTH_NESTING);
+		if (context_equiv(ctx, next_ctx)) {
+			/*
+			 * XXX do we need a memory barrier of sorts
+			 * wrt to rcu_dereference() of perf_counter_ctxp
+			 */
+			task->perf_counter_ctxp = next_ctx;
+			next->perf_counter_ctxp = ctx;
+			ctx->task = next;
+			next_ctx->task = task;
+			do_switch = 0;
+		}
+		spin_unlock(&next_ctx->lock);
+		spin_unlock(&ctx->lock);
+	}
+	rcu_read_unlock();
+
+	if (do_switch) {
+		__perf_counter_sched_out(ctx, cpuctx);
+		cpuctx->task_ctx = NULL;
+	}
+}
+
+/*
+ * Called with IRQs disabled
+ */
+static void __perf_counter_task_sched_out(struct perf_counter_context *ctx)
+{
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+
+	if (!cpuctx->task_ctx)
+		return;
+
+	if (WARN_ON_ONCE(ctx != cpuctx->task_ctx))
+		return;
+
+	__perf_counter_sched_out(ctx, cpuctx);
+	cpuctx->task_ctx = NULL;
+}
+
+/*
+ * Called with IRQs disabled
+ */
+static void perf_counter_cpu_sched_out(struct perf_cpu_context *cpuctx)
+{
+	__perf_counter_sched_out(&cpuctx->ctx, cpuctx);
+}
+
+static void
+__perf_counter_sched_in(struct perf_counter_context *ctx,
+			struct perf_cpu_context *cpuctx, int cpu)
+{
+	struct perf_counter *counter;
+	int can_add_hw = 1;
+
+	spin_lock(&ctx->lock);
+	ctx->is_active = 1;
+	if (likely(!ctx->nr_counters))
+		goto out;
+
+	ctx->timestamp = perf_clock();
+
+	perf_disable();
+
+	/*
+	 * First go through the list and put on any pinned groups
+	 * in order to give them the best chance of going on.
+	 */
+	list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+		if (counter->state <= PERF_COUNTER_STATE_OFF ||
+		    !counter->attr.pinned)
+			continue;
+		if (counter->cpu != -1 && counter->cpu != cpu)
+			continue;
+
+		if (counter != counter->group_leader)
+			counter_sched_in(counter, cpuctx, ctx, cpu);
+		else {
+			if (group_can_go_on(counter, cpuctx, 1))
+				group_sched_in(counter, cpuctx, ctx, cpu);
+		}
+
+		/*
+		 * If this pinned group hasn't been scheduled,
+		 * put it in error state.
+		 */
+		if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
+			update_group_times(counter);
+			counter->state = PERF_COUNTER_STATE_ERROR;
+		}
+	}
+
+	list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+		/*
+		 * Ignore counters in OFF or ERROR state, and
+		 * ignore pinned counters since we did them already.
+		 */
+		if (counter->state <= PERF_COUNTER_STATE_OFF ||
+		    counter->attr.pinned)
+			continue;
+
+		/*
+		 * Listen to the 'cpu' scheduling filter constraint
+		 * of counters:
+		 */
+		if (counter->cpu != -1 && counter->cpu != cpu)
+			continue;
+
+		if (counter != counter->group_leader) {
+			if (counter_sched_in(counter, cpuctx, ctx, cpu))
+				can_add_hw = 0;
+		} else {
+			if (group_can_go_on(counter, cpuctx, can_add_hw)) {
+				if (group_sched_in(counter, cpuctx, ctx, cpu))
+					can_add_hw = 0;
+			}
+		}
+	}
+	perf_enable();
+ out:
+	spin_unlock(&ctx->lock);
+}
+
+/*
+ * Called from scheduler to add the counters of the current task
+ * with interrupts disabled.
+ *
+ * We restore the counter value and then enable it.
+ *
+ * This does not protect us against NMI, but enable()
+ * sets the enabled bit in the control field of counter _before_
+ * accessing the counter control register. If a NMI hits, then it will
+ * keep the counter running.
+ */
+void perf_counter_task_sched_in(struct task_struct *task, int cpu)
+{
+	struct perf_cpu_context *cpuctx = &per_cpu(perf_cpu_context, cpu);
+	struct perf_counter_context *ctx = task->perf_counter_ctxp;
+
+	if (likely(!ctx))
+		return;
+	if (cpuctx->task_ctx == ctx)
+		return;
+	__perf_counter_sched_in(ctx, cpuctx, cpu);
+	cpuctx->task_ctx = ctx;
+}
+
+static void perf_counter_cpu_sched_in(struct perf_cpu_context *cpuctx, int cpu)
+{
+	struct perf_counter_context *ctx = &cpuctx->ctx;
+
+	__perf_counter_sched_in(ctx, cpuctx, cpu);
+}
+
+#define MAX_INTERRUPTS (~0ULL)
+
+static void perf_log_throttle(struct perf_counter *counter, int enable);
+static void perf_log_period(struct perf_counter *counter, u64 period);
+
+static void perf_adjust_period(struct perf_counter *counter, u64 events)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	u64 period, sample_period;
+	s64 delta;
+
+	events *= hwc->sample_period;
+	period = div64_u64(events, counter->attr.sample_freq);
+
+	delta = (s64)(period - hwc->sample_period);
+	delta = (delta + 7) / 8; /* low pass filter */
+
+	sample_period = hwc->sample_period + delta;
+
+	if (!sample_period)
+		sample_period = 1;
+
+	perf_log_period(counter, sample_period);
+
+	hwc->sample_period = sample_period;
+}
+
+static void perf_ctx_adjust_freq(struct perf_counter_context *ctx)
+{
+	struct perf_counter *counter;
+	struct hw_perf_counter *hwc;
+	u64 interrupts, freq;
+
+	spin_lock(&ctx->lock);
+	list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+		if (counter->state != PERF_COUNTER_STATE_ACTIVE)
+			continue;
+
+		hwc = &counter->hw;
+
+		interrupts = hwc->interrupts;
+		hwc->interrupts = 0;
+
+		/*
+		 * unthrottle counters on the tick
+		 */
+		if (interrupts == MAX_INTERRUPTS) {
+			perf_log_throttle(counter, 1);
+			counter->pmu->unthrottle(counter);
+			interrupts = 2*sysctl_perf_counter_sample_rate/HZ;
+		}
+
+		if (!counter->attr.freq || !counter->attr.sample_freq)
+			continue;
+
+		/*
+		 * if the specified freq < HZ then we need to skip ticks
+		 */
+		if (counter->attr.sample_freq < HZ) {
+			freq = counter->attr.sample_freq;
+
+			hwc->freq_count += freq;
+			hwc->freq_interrupts += interrupts;
+
+			if (hwc->freq_count < HZ)
+				continue;
+
+			interrupts = hwc->freq_interrupts;
+			hwc->freq_interrupts = 0;
+			hwc->freq_count -= HZ;
+		} else
+			freq = HZ;
+
+		perf_adjust_period(counter, freq * interrupts);
+
+		/*
+		 * In order to avoid being stalled by an (accidental) huge
+		 * sample period, force reset the sample period if we didn't
+		 * get any events in this freq period.
+		 */
+		if (!interrupts) {
+			perf_disable();
+			counter->pmu->disable(counter);
+			atomic_set(&hwc->period_left, 0);
+			counter->pmu->enable(counter);
+			perf_enable();
+		}
+	}
+	spin_unlock(&ctx->lock);
+}
+
+/*
+ * Round-robin a context's counters:
+ */
+static void rotate_ctx(struct perf_counter_context *ctx)
+{
+	struct perf_counter *counter;
+
+	if (!ctx->nr_counters)
+		return;
+
+	spin_lock(&ctx->lock);
+	/*
+	 * Rotate the first entry last (works just fine for group counters too):
+	 */
+	perf_disable();
+	list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+		list_move_tail(&counter->list_entry, &ctx->counter_list);
+		break;
+	}
+	perf_enable();
+
+	spin_unlock(&ctx->lock);
+}
+
+void perf_counter_task_tick(struct task_struct *curr, int cpu)
+{
+	struct perf_cpu_context *cpuctx;
+	struct perf_counter_context *ctx;
+
+	if (!atomic_read(&nr_counters))
+		return;
+
+	cpuctx = &per_cpu(perf_cpu_context, cpu);
+	ctx = curr->perf_counter_ctxp;
+
+	perf_ctx_adjust_freq(&cpuctx->ctx);
+	if (ctx)
+		perf_ctx_adjust_freq(ctx);
+
+	perf_counter_cpu_sched_out(cpuctx);
+	if (ctx)
+		__perf_counter_task_sched_out(ctx);
+
+	rotate_ctx(&cpuctx->ctx);
+	if (ctx)
+		rotate_ctx(ctx);
+
+	perf_counter_cpu_sched_in(cpuctx, cpu);
+	if (ctx)
+		perf_counter_task_sched_in(curr, cpu);
+}
+
+/*
+ * Cross CPU call to read the hardware counter
+ */
+static void __read(void *info)
+{
+	struct perf_counter *counter = info;
+	struct perf_counter_context *ctx = counter->ctx;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (ctx->is_active)
+		update_context_time(ctx);
+	counter->pmu->read(counter);
+	update_counter_times(counter);
+	local_irq_restore(flags);
+}
+
+static u64 perf_counter_read(struct perf_counter *counter)
+{
+	/*
+	 * If counter is enabled and currently active on a CPU, update the
+	 * value in the counter structure:
+	 */
+	if (counter->state == PERF_COUNTER_STATE_ACTIVE) {
+		smp_call_function_single(counter->oncpu,
+					 __read, counter, 1);
+	} else if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
+		update_counter_times(counter);
+	}
+
+	return atomic64_read(&counter->count);
+}
+
+/*
+ * Initialize the perf_counter context in a task_struct:
+ */
+static void
+__perf_counter_init_context(struct perf_counter_context *ctx,
+			    struct task_struct *task)
+{
+	memset(ctx, 0, sizeof(*ctx));
+	spin_lock_init(&ctx->lock);
+	mutex_init(&ctx->mutex);
+	INIT_LIST_HEAD(&ctx->counter_list);
+	INIT_LIST_HEAD(&ctx->event_list);
+	atomic_set(&ctx->refcount, 1);
+	ctx->task = task;
+}
+
+static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
+{
+	struct perf_counter_context *parent_ctx;
+	struct perf_counter_context *ctx;
+	struct perf_cpu_context *cpuctx;
+	struct task_struct *task;
+	unsigned long flags;
+	int err;
+
+	/*
+	 * If cpu is not a wildcard then this is a percpu counter:
+	 */
+	if (cpu != -1) {
+		/* Must be root to operate on a CPU counter: */
+		if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN))
+			return ERR_PTR(-EACCES);
+
+		if (cpu < 0 || cpu > num_possible_cpus())
+			return ERR_PTR(-EINVAL);
+
+		/*
+		 * We could be clever and allow to attach a counter to an
+		 * offline CPU and activate it when the CPU comes up, but
+		 * that's for later.
+		 */
+		if (!cpu_isset(cpu, cpu_online_map))
+			return ERR_PTR(-ENODEV);
+
+		cpuctx = &per_cpu(perf_cpu_context, cpu);
+		ctx = &cpuctx->ctx;
+		get_ctx(ctx);
+
+		return ctx;
+	}
+
+	rcu_read_lock();
+	if (!pid)
+		task = current;
+	else
+		task = find_task_by_vpid(pid);
+	if (task)
+		get_task_struct(task);
+	rcu_read_unlock();
+
+	if (!task)
+		return ERR_PTR(-ESRCH);
+
+	/*
+	 * Can't attach counters to a dying task.
+	 */
+	err = -ESRCH;
+	if (task->flags & PF_EXITING)
+		goto errout;
+
+	/* Reuse ptrace permission checks for now. */
+	err = -EACCES;
+	if (!ptrace_may_access(task, PTRACE_MODE_READ))
+		goto errout;
+
+ retry:
+	ctx = perf_lock_task_context(task, &flags);
+	if (ctx) {
+		parent_ctx = ctx->parent_ctx;
+		if (parent_ctx) {
+			put_ctx(parent_ctx);
+			ctx->parent_ctx = NULL;		/* no longer a clone */
+		}
+		/*
+		 * Get an extra reference before dropping the lock so that
+		 * this context won't get freed if the task exits.
+		 */
+		get_ctx(ctx);
+		spin_unlock_irqrestore(&ctx->lock, flags);
+	}
+
+	if (!ctx) {
+		ctx = kmalloc(sizeof(struct perf_counter_context), GFP_KERNEL);
+		err = -ENOMEM;
+		if (!ctx)
+			goto errout;
+		__perf_counter_init_context(ctx, task);
+		get_ctx(ctx);
+		if (cmpxchg(&task->perf_counter_ctxp, NULL, ctx)) {
+			/*
+			 * We raced with some other task; use
+			 * the context they set.
+			 */
+			kfree(ctx);
+			goto retry;
+		}
+		get_task_struct(task);
+	}
+
+	put_task_struct(task);
+	return ctx;
+
+ errout:
+	put_task_struct(task);
+	return ERR_PTR(err);
+}
+
+static void free_counter_rcu(struct rcu_head *head)
+{
+	struct perf_counter *counter;
+
+	counter = container_of(head, struct perf_counter, rcu_head);
+	if (counter->ns)
+		put_pid_ns(counter->ns);
+	kfree(counter);
+}
+
+static void perf_pending_sync(struct perf_counter *counter);
+
+static void free_counter(struct perf_counter *counter)
+{
+	perf_pending_sync(counter);
+
+	atomic_dec(&nr_counters);
+	if (counter->attr.mmap)
+		atomic_dec(&nr_mmap_counters);
+	if (counter->attr.comm)
+		atomic_dec(&nr_comm_counters);
+
+	if (counter->destroy)
+		counter->destroy(counter);
+
+	put_ctx(counter->ctx);
+	call_rcu(&counter->rcu_head, free_counter_rcu);
+}
+
+/*
+ * Called when the last reference to the file is gone.
+ */
+static int perf_release(struct inode *inode, struct file *file)
+{
+	struct perf_counter *counter = file->private_data;
+	struct perf_counter_context *ctx = counter->ctx;
+
+	file->private_data = NULL;
+
+	WARN_ON_ONCE(ctx->parent_ctx);
+	mutex_lock(&ctx->mutex);
+	perf_counter_remove_from_context(counter);
+	mutex_unlock(&ctx->mutex);
+
+	mutex_lock(&counter->owner->perf_counter_mutex);
+	list_del_init(&counter->owner_entry);
+	mutex_unlock(&counter->owner->perf_counter_mutex);
+	put_task_struct(counter->owner);
+
+	free_counter(counter);
+
+	return 0;
+}
+
+/*
+ * Read the performance counter - simple non blocking version for now
+ */
+static ssize_t
+perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
+{
+	u64 values[3];
+	int n;
+
+	/*
+	 * Return end-of-file for a read on a counter that is in
+	 * error state (i.e. because it was pinned but it couldn't be
+	 * scheduled on to the CPU at some point).
+	 */
+	if (counter->state == PERF_COUNTER_STATE_ERROR)
+		return 0;
+
+	WARN_ON_ONCE(counter->ctx->parent_ctx);
+	mutex_lock(&counter->child_mutex);
+	values[0] = perf_counter_read(counter);
+	n = 1;
+	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+		values[n++] = counter->total_time_enabled +
+			atomic64_read(&counter->child_total_time_enabled);
+	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+		values[n++] = counter->total_time_running +
+			atomic64_read(&counter->child_total_time_running);
+	if (counter->attr.read_format & PERF_FORMAT_ID)
+		values[n++] = counter->id;
+	mutex_unlock(&counter->child_mutex);
+
+	if (count < n * sizeof(u64))
+		return -EINVAL;
+	count = n * sizeof(u64);
+
+	if (copy_to_user(buf, values, count))
+		return -EFAULT;
+
+	return count;
+}
+
+static ssize_t
+perf_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	struct perf_counter *counter = file->private_data;
+
+	return perf_read_hw(counter, buf, count);
+}
+
+static unsigned int perf_poll(struct file *file, poll_table *wait)
+{
+	struct perf_counter *counter = file->private_data;
+	struct perf_mmap_data *data;
+	unsigned int events = POLL_HUP;
+
+	rcu_read_lock();
+	data = rcu_dereference(counter->data);
+	if (data)
+		events = atomic_xchg(&data->poll, 0);
+	rcu_read_unlock();
+
+	poll_wait(file, &counter->waitq, wait);
+
+	return events;
+}
+
+static void perf_counter_reset(struct perf_counter *counter)
+{
+	(void)perf_counter_read(counter);
+	atomic64_set(&counter->count, 0);
+	perf_counter_update_userpage(counter);
+}
+
+static void perf_counter_for_each_sibling(struct perf_counter *counter,
+					  void (*func)(struct perf_counter *))
+{
+	struct perf_counter_context *ctx = counter->ctx;
+	struct perf_counter *sibling;
+
+	WARN_ON_ONCE(ctx->parent_ctx);
+	mutex_lock(&ctx->mutex);
+	counter = counter->group_leader;
+
+	func(counter);
+	list_for_each_entry(sibling, &counter->sibling_list, list_entry)
+		func(sibling);
+	mutex_unlock(&ctx->mutex);
+}
+
+/*
+ * Holding the top-level counter's child_mutex means that any
+ * descendant process that has inherited this counter will block
+ * in sync_child_counter if it goes to exit, thus satisfying the
+ * task existence requirements of perf_counter_enable/disable.
+ */
+static void perf_counter_for_each_child(struct perf_counter *counter,
+					void (*func)(struct perf_counter *))
+{
+	struct perf_counter *child;
+
+	WARN_ON_ONCE(counter->ctx->parent_ctx);
+	mutex_lock(&counter->child_mutex);
+	func(counter);
+	list_for_each_entry(child, &counter->child_list, child_list)
+		func(child);
+	mutex_unlock(&counter->child_mutex);
+}
+
+static void perf_counter_for_each(struct perf_counter *counter,
+				  void (*func)(struct perf_counter *))
+{
+	struct perf_counter *child;
+
+	WARN_ON_ONCE(counter->ctx->parent_ctx);
+	mutex_lock(&counter->child_mutex);
+	perf_counter_for_each_sibling(counter, func);
+	list_for_each_entry(child, &counter->child_list, child_list)
+		perf_counter_for_each_sibling(child, func);
+	mutex_unlock(&counter->child_mutex);
+}
+
+static int perf_counter_period(struct perf_counter *counter, u64 __user *arg)
+{
+	struct perf_counter_context *ctx = counter->ctx;
+	unsigned long size;
+	int ret = 0;
+	u64 value;
+
+	if (!counter->attr.sample_period)
+		return -EINVAL;
+
+	size = copy_from_user(&value, arg, sizeof(value));
+	if (size != sizeof(value))
+		return -EFAULT;
+
+	if (!value)
+		return -EINVAL;
+
+	spin_lock_irq(&ctx->lock);
+	if (counter->attr.freq) {
+		if (value > sysctl_perf_counter_sample_rate) {
+			ret = -EINVAL;
+			goto unlock;
+		}
+
+		counter->attr.sample_freq = value;
+	} else {
+		perf_log_period(counter, value);
+
+		counter->attr.sample_period = value;
+		counter->hw.sample_period = value;
+	}
+unlock:
+	spin_unlock_irq(&ctx->lock);
+
+	return ret;
+}
+
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct perf_counter *counter = file->private_data;
+	void (*func)(struct perf_counter *);
+	u32 flags = arg;
+
+	switch (cmd) {
+	case PERF_COUNTER_IOC_ENABLE:
+		func = perf_counter_enable;
+		break;
+	case PERF_COUNTER_IOC_DISABLE:
+		func = perf_counter_disable;
+		break;
+	case PERF_COUNTER_IOC_RESET:
+		func = perf_counter_reset;
+		break;
+
+	case PERF_COUNTER_IOC_REFRESH:
+		return perf_counter_refresh(counter, arg);
+
+	case PERF_COUNTER_IOC_PERIOD:
+		return perf_counter_period(counter, (u64 __user *)arg);
+
+	default:
+		return -ENOTTY;
+	}
+
+	if (flags & PERF_IOC_FLAG_GROUP)
+		perf_counter_for_each(counter, func);
+	else
+		perf_counter_for_each_child(counter, func);
+
+	return 0;
+}
+
+int perf_counter_task_enable(void)
+{
+	struct perf_counter *counter;
+
+	mutex_lock(&current->perf_counter_mutex);
+	list_for_each_entry(counter, &current->perf_counter_list, owner_entry)
+		perf_counter_for_each_child(counter, perf_counter_enable);
+	mutex_unlock(&current->perf_counter_mutex);
+
+	return 0;
+}
+
+int perf_counter_task_disable(void)
+{
+	struct perf_counter *counter;
+
+	mutex_lock(&current->perf_counter_mutex);
+	list_for_each_entry(counter, &current->perf_counter_list, owner_entry)
+		perf_counter_for_each_child(counter, perf_counter_disable);
+	mutex_unlock(&current->perf_counter_mutex);
+
+	return 0;
+}
+
+/*
+ * Callers need to ensure there can be no nesting of this function, otherwise
+ * the seqlock logic goes bad. We can not serialize this because the arch
+ * code calls this from NMI context.
+ */
+void perf_counter_update_userpage(struct perf_counter *counter)
+{
+	struct perf_counter_mmap_page *userpg;
+	struct perf_mmap_data *data;
+
+	rcu_read_lock();
+	data = rcu_dereference(counter->data);
+	if (!data)
+		goto unlock;
+
+	userpg = data->user_page;
+
+	/*
+	 * Disable preemption so as to not let the corresponding user-space
+	 * spin too long if we get preempted.
+	 */
+	preempt_disable();
+	++userpg->lock;
+	barrier();
+	userpg->index = counter->hw.idx;
+	userpg->offset = atomic64_read(&counter->count);
+	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
+		userpg->offset -= atomic64_read(&counter->hw.prev_count);
+
+	barrier();
+	++userpg->lock;
+	preempt_enable();
+unlock:
+	rcu_read_unlock();
+}
+
+static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct perf_counter *counter = vma->vm_file->private_data;
+	struct perf_mmap_data *data;
+	int ret = VM_FAULT_SIGBUS;
+
+	rcu_read_lock();
+	data = rcu_dereference(counter->data);
+	if (!data)
+		goto unlock;
+
+	if (vmf->pgoff == 0) {
+		vmf->page = virt_to_page(data->user_page);
+	} else {
+		int nr = vmf->pgoff - 1;
+
+		if ((unsigned)nr > data->nr_pages)
+			goto unlock;
+
+		vmf->page = virt_to_page(data->data_pages[nr]);
+	}
+	get_page(vmf->page);
+	ret = 0;
+unlock:
+	rcu_read_unlock();
+
+	return ret;
+}
+
+static int perf_mmap_data_alloc(struct perf_counter *counter, int nr_pages)
+{
+	struct perf_mmap_data *data;
+	unsigned long size;
+	int i;
+
+	WARN_ON(atomic_read(&counter->mmap_count));
+
+	size = sizeof(struct perf_mmap_data);
+	size += nr_pages * sizeof(void *);
+
+	data = kzalloc(size, GFP_KERNEL);
+	if (!data)
+		goto fail;
+
+	data->user_page = (void *)get_zeroed_page(GFP_KERNEL);
+	if (!data->user_page)
+		goto fail_user_page;
+
+	for (i = 0; i < nr_pages; i++) {
+		data->data_pages[i] = (void *)get_zeroed_page(GFP_KERNEL);
+		if (!data->data_pages[i])
+			goto fail_data_pages;
+	}
+
+	data->nr_pages = nr_pages;
+	atomic_set(&data->lock, -1);
+
+	rcu_assign_pointer(counter->data, data);
+
+	return 0;
+
+fail_data_pages:
+	for (i--; i >= 0; i--)
+		free_page((unsigned long)data->data_pages[i]);
+
+	free_page((unsigned long)data->user_page);
+
+fail_user_page:
+	kfree(data);
+
+fail:
+	return -ENOMEM;
+}
+
+static void __perf_mmap_data_free(struct rcu_head *rcu_head)
+{
+	struct perf_mmap_data *data;
+	int i;
+
+	data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
+
+	free_page((unsigned long)data->user_page);
+	for (i = 0; i < data->nr_pages; i++)
+		free_page((unsigned long)data->data_pages[i]);
+	kfree(data);
+}
+
+static void perf_mmap_data_free(struct perf_counter *counter)
+{
+	struct perf_mmap_data *data = counter->data;
+
+	WARN_ON(atomic_read(&counter->mmap_count));
+
+	rcu_assign_pointer(counter->data, NULL);
+	call_rcu(&data->rcu_head, __perf_mmap_data_free);
+}
+
+static void perf_mmap_open(struct vm_area_struct *vma)
+{
+	struct perf_counter *counter = vma->vm_file->private_data;
+
+	atomic_inc(&counter->mmap_count);
+}
+
+static void perf_mmap_close(struct vm_area_struct *vma)
+{
+	struct perf_counter *counter = vma->vm_file->private_data;
+
+	WARN_ON_ONCE(counter->ctx->parent_ctx);
+	if (atomic_dec_and_mutex_lock(&counter->mmap_count, &counter->mmap_mutex)) {
+		struct user_struct *user = current_user();
+
+		atomic_long_sub(counter->data->nr_pages + 1, &user->locked_vm);
+		vma->vm_mm->locked_vm -= counter->data->nr_locked;
+		perf_mmap_data_free(counter);
+		mutex_unlock(&counter->mmap_mutex);
+	}
+}
+
+static struct vm_operations_struct perf_mmap_vmops = {
+	.open  = perf_mmap_open,
+	.close = perf_mmap_close,
+	.fault = perf_mmap_fault,
+};
+
+static int perf_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct perf_counter *counter = file->private_data;
+	unsigned long user_locked, user_lock_limit;
+	struct user_struct *user = current_user();
+	unsigned long locked, lock_limit;
+	unsigned long vma_size;
+	unsigned long nr_pages;
+	long user_extra, extra;
+	int ret = 0;
+
+	if (!(vma->vm_flags & VM_SHARED) || (vma->vm_flags & VM_WRITE))
+		return -EINVAL;
+
+	vma_size = vma->vm_end - vma->vm_start;
+	nr_pages = (vma_size / PAGE_SIZE) - 1;
+
+	/*
+	 * If we have data pages ensure they're a power-of-two number, so we
+	 * can do bitmasks instead of modulo.
+	 */
+	if (nr_pages != 0 && !is_power_of_2(nr_pages))
+		return -EINVAL;
+
+	if (vma_size != PAGE_SIZE * (1 + nr_pages))
+		return -EINVAL;
+
+	if (vma->vm_pgoff != 0)
+		return -EINVAL;
+
+	WARN_ON_ONCE(counter->ctx->parent_ctx);
+	mutex_lock(&counter->mmap_mutex);
+	if (atomic_inc_not_zero(&counter->mmap_count)) {
+		if (nr_pages != counter->data->nr_pages)
+			ret = -EINVAL;
+		goto unlock;
+	}
+
+	user_extra = nr_pages + 1;
+	user_lock_limit = sysctl_perf_counter_mlock >> (PAGE_SHIFT - 10);
+
+	/*
+	 * Increase the limit linearly with more CPUs:
+	 */
+	user_lock_limit *= num_online_cpus();
+
+	user_locked = atomic_long_read(&user->locked_vm) + user_extra;
+
+	extra = 0;
+	if (user_locked > user_lock_limit)
+		extra = user_locked - user_lock_limit;
+
+	lock_limit = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur;
+	lock_limit >>= PAGE_SHIFT;
+	locked = vma->vm_mm->locked_vm + extra;
+
+	if ((locked > lock_limit) && !capable(CAP_IPC_LOCK)) {
+		ret = -EPERM;
+		goto unlock;
+	}
+
+	WARN_ON(counter->data);
+	ret = perf_mmap_data_alloc(counter, nr_pages);
+	if (ret)
+		goto unlock;
+
+	atomic_set(&counter->mmap_count, 1);
+	atomic_long_add(user_extra, &user->locked_vm);
+	vma->vm_mm->locked_vm += extra;
+	counter->data->nr_locked = extra;
+unlock:
+	mutex_unlock(&counter->mmap_mutex);
+
+	vma->vm_flags &= ~VM_MAYWRITE;
+	vma->vm_flags |= VM_RESERVED;
+	vma->vm_ops = &perf_mmap_vmops;
+
+	return ret;
+}
+
+static int perf_fasync(int fd, struct file *filp, int on)
+{
+	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct perf_counter *counter = filp->private_data;
+	int retval;
+
+	mutex_lock(&inode->i_mutex);
+	retval = fasync_helper(fd, filp, on, &counter->fasync);
+	mutex_unlock(&inode->i_mutex);
+
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static const struct file_operations perf_fops = {
+	.release		= perf_release,
+	.read			= perf_read,
+	.poll			= perf_poll,
+	.unlocked_ioctl		= perf_ioctl,
+	.compat_ioctl		= perf_ioctl,
+	.mmap			= perf_mmap,
+	.fasync			= perf_fasync,
+};
+
+/*
+ * Perf counter wakeup
+ *
+ * If there's data, ensure we set the poll() state and publish everything
+ * to user-space before waking everybody up.
+ */
+
+void perf_counter_wakeup(struct perf_counter *counter)
+{
+	wake_up_all(&counter->waitq);
+
+	if (counter->pending_kill) {
+		kill_fasync(&counter->fasync, SIGIO, counter->pending_kill);
+		counter->pending_kill = 0;
+	}
+}
+
+/*
+ * Pending wakeups
+ *
+ * Handle the case where we need to wakeup up from NMI (or rq->lock) context.
+ *
+ * The NMI bit means we cannot possibly take locks. Therefore, maintain a
+ * single linked list and use cmpxchg() to add entries lockless.
+ */
+
+static void perf_pending_counter(struct perf_pending_entry *entry)
+{
+	struct perf_counter *counter = container_of(entry,
+			struct perf_counter, pending);
+
+	if (counter->pending_disable) {
+		counter->pending_disable = 0;
+		perf_counter_disable(counter);
+	}
+
+	if (counter->pending_wakeup) {
+		counter->pending_wakeup = 0;
+		perf_counter_wakeup(counter);
+	}
+}
+
+#define PENDING_TAIL ((struct perf_pending_entry *)-1UL)
+
+static DEFINE_PER_CPU(struct perf_pending_entry *, perf_pending_head) = {
+	PENDING_TAIL,
+};
+
+static void perf_pending_queue(struct perf_pending_entry *entry,
+			       void (*func)(struct perf_pending_entry *))
+{
+	struct perf_pending_entry **head;
+
+	if (cmpxchg(&entry->next, NULL, PENDING_TAIL) != NULL)
+		return;
+
+	entry->func = func;
+
+	head = &get_cpu_var(perf_pending_head);
+
+	do {
+		entry->next = *head;
+	} while (cmpxchg(head, entry->next, entry) != entry->next);
+
+	set_perf_counter_pending();
+
+	put_cpu_var(perf_pending_head);
+}
+
+static int __perf_pending_run(void)
+{
+	struct perf_pending_entry *list;
+	int nr = 0;
+
+	list = xchg(&__get_cpu_var(perf_pending_head), PENDING_TAIL);
+	while (list != PENDING_TAIL) {
+		void (*func)(struct perf_pending_entry *);
+		struct perf_pending_entry *entry = list;
+
+		list = list->next;
+
+		func = entry->func;
+		entry->next = NULL;
+		/*
+		 * Ensure we observe the unqueue before we issue the wakeup,
+		 * so that we won't be waiting forever.
+		 * -- see perf_not_pending().
+		 */
+		smp_wmb();
+
+		func(entry);
+		nr++;
+	}
+
+	return nr;
+}
+
+static inline int perf_not_pending(struct perf_counter *counter)
+{
+	/*
+	 * If we flush on whatever cpu we run, there is a chance we don't
+	 * need to wait.
+	 */
+	get_cpu();
+	__perf_pending_run();
+	put_cpu();
+
+	/*
+	 * Ensure we see the proper queue state before going to sleep
+	 * so that we do not miss the wakeup. -- see perf_pending_handle()
+	 */
+	smp_rmb();
+	return counter->pending.next == NULL;
+}
+
+static void perf_pending_sync(struct perf_counter *counter)
+{
+	wait_event(counter->waitq, perf_not_pending(counter));
+}
+
+void perf_counter_do_pending(void)
+{
+	__perf_pending_run();
+}
+
+/*
+ * Callchain support -- arch specific
+ */
+
+__weak struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	return NULL;
+}
+
+/*
+ * Output
+ */
+
+struct perf_output_handle {
+	struct perf_counter	*counter;
+	struct perf_mmap_data	*data;
+	unsigned long		head;
+	unsigned long		offset;
+	int			nmi;
+	int			overflow;
+	int			locked;
+	unsigned long		flags;
+};
+
+static void perf_output_wakeup(struct perf_output_handle *handle)
+{
+	atomic_set(&handle->data->poll, POLL_IN);
+
+	if (handle->nmi) {
+		handle->counter->pending_wakeup = 1;
+		perf_pending_queue(&handle->counter->pending,
+				   perf_pending_counter);
+	} else
+		perf_counter_wakeup(handle->counter);
+}
+
+/*
+ * Curious locking construct.
+ *
+ * We need to ensure a later event doesn't publish a head when a former
+ * event isn't done writing. However since we need to deal with NMIs we
+ * cannot fully serialize things.
+ *
+ * What we do is serialize between CPUs so we only have to deal with NMI
+ * nesting on a single CPU.
+ *
+ * We only publish the head (and generate a wakeup) when the outer-most
+ * event completes.
+ */
+static void perf_output_lock(struct perf_output_handle *handle)
+{
+	struct perf_mmap_data *data = handle->data;
+	int cpu;
+
+	handle->locked = 0;
+
+	local_irq_save(handle->flags);
+	cpu = smp_processor_id();
+
+	if (in_nmi() && atomic_read(&data->lock) == cpu)
+		return;
+
+	while (atomic_cmpxchg(&data->lock, -1, cpu) != -1)
+		cpu_relax();
+
+	handle->locked = 1;
+}
+
+static void perf_output_unlock(struct perf_output_handle *handle)
+{
+	struct perf_mmap_data *data = handle->data;
+	unsigned long head;
+	int cpu;
+
+	data->done_head = data->head;
+
+	if (!handle->locked)
+		goto out;
+
+again:
+	/*
+	 * The xchg implies a full barrier that ensures all writes are done
+	 * before we publish the new head, matched by a rmb() in userspace when
+	 * reading this position.
+	 */
+	while ((head = atomic_long_xchg(&data->done_head, 0)))
+		data->user_page->data_head = head;
+
+	/*
+	 * NMI can happen here, which means we can miss a done_head update.
+	 */
+
+	cpu = atomic_xchg(&data->lock, -1);
+	WARN_ON_ONCE(cpu != smp_processor_id());
+
+	/*
+	 * Therefore we have to validate we did not indeed do so.
+	 */
+	if (unlikely(atomic_long_read(&data->done_head))) {
+		/*
+		 * Since we had it locked, we can lock it again.
+		 */
+		while (atomic_cmpxchg(&data->lock, -1, cpu) != -1)
+			cpu_relax();
+
+		goto again;
+	}
+
+	if (atomic_xchg(&data->wakeup, 0))
+		perf_output_wakeup(handle);
+out:
+	local_irq_restore(handle->flags);
+}
+
+static int perf_output_begin(struct perf_output_handle *handle,
+			     struct perf_counter *counter, unsigned int size,
+			     int nmi, int overflow)
+{
+	struct perf_mmap_data *data;
+	unsigned int offset, head;
+
+	/*
+	 * For inherited counters we send all the output towards the parent.
+	 */
+	if (counter->parent)
+		counter = counter->parent;
+
+	rcu_read_lock();
+	data = rcu_dereference(counter->data);
+	if (!data)
+		goto out;
+
+	handle->data	 = data;
+	handle->counter	 = counter;
+	handle->nmi	 = nmi;
+	handle->overflow = overflow;
+
+	if (!data->nr_pages)
+		goto fail;
+
+	perf_output_lock(handle);
+
+	do {
+		offset = head = atomic_long_read(&data->head);
+		head += size;
+	} while (atomic_long_cmpxchg(&data->head, offset, head) != offset);
+
+	handle->offset	= offset;
+	handle->head	= head;
+
+	if ((offset >> PAGE_SHIFT) != (head >> PAGE_SHIFT))
+		atomic_set(&data->wakeup, 1);
+
+	return 0;
+
+fail:
+	perf_output_wakeup(handle);
+out:
+	rcu_read_unlock();
+
+	return -ENOSPC;
+}
+
+static void perf_output_copy(struct perf_output_handle *handle,
+			     const void *buf, unsigned int len)
+{
+	unsigned int pages_mask;
+	unsigned int offset;
+	unsigned int size;
+	void **pages;
+
+	offset		= handle->offset;
+	pages_mask	= handle->data->nr_pages - 1;
+	pages		= handle->data->data_pages;
+
+	do {
+		unsigned int page_offset;
+		int nr;
+
+		nr	    = (offset >> PAGE_SHIFT) & pages_mask;
+		page_offset = offset & (PAGE_SIZE - 1);
+		size	    = min_t(unsigned int, PAGE_SIZE - page_offset, len);
+
+		memcpy(pages[nr] + page_offset, buf, size);
+
+		len	    -= size;
+		buf	    += size;
+		offset	    += size;
+	} while (len);
+
+	handle->offset = offset;
+
+	/*
+	 * Check we didn't copy past our reservation window, taking the
+	 * possible unsigned int wrap into account.
+	 */
+	WARN_ON_ONCE(((long)(handle->head - handle->offset)) < 0);
+}
+
+#define perf_output_put(handle, x) \
+	perf_output_copy((handle), &(x), sizeof(x))
+
+static void perf_output_end(struct perf_output_handle *handle)
+{
+	struct perf_counter *counter = handle->counter;
+	struct perf_mmap_data *data = handle->data;
+
+	int wakeup_events = counter->attr.wakeup_events;
+
+	if (handle->overflow && wakeup_events) {
+		int events = atomic_inc_return(&data->events);
+		if (events >= wakeup_events) {
+			atomic_sub(wakeup_events, &data->events);
+			atomic_set(&data->wakeup, 1);
+		}
+	}
+
+	perf_output_unlock(handle);
+	rcu_read_unlock();
+}
+
+static u32 perf_counter_pid(struct perf_counter *counter, struct task_struct *p)
+{
+	/*
+	 * only top level counters have the pid namespace they were created in
+	 */
+	if (counter->parent)
+		counter = counter->parent;
+
+	return task_tgid_nr_ns(p, counter->ns);
+}
+
+static u32 perf_counter_tid(struct perf_counter *counter, struct task_struct *p)
+{
+	/*
+	 * only top level counters have the pid namespace they were created in
+	 */
+	if (counter->parent)
+		counter = counter->parent;
+
+	return task_pid_nr_ns(p, counter->ns);
+}
+
+static void perf_counter_output(struct perf_counter *counter, int nmi,
+				struct perf_sample_data *data)
+{
+	int ret;
+	u64 sample_type = counter->attr.sample_type;
+	struct perf_output_handle handle;
+	struct perf_event_header header;
+	u64 ip;
+	struct {
+		u32 pid, tid;
+	} tid_entry;
+	struct {
+		u64 id;
+		u64 counter;
+	} group_entry;
+	struct perf_callchain_entry *callchain = NULL;
+	int callchain_size = 0;
+	u64 time;
+	struct {
+		u32 cpu, reserved;
+	} cpu_entry;
+
+	header.type = 0;
+	header.size = sizeof(header);
+
+	header.misc = PERF_EVENT_MISC_OVERFLOW;
+	header.misc |= perf_misc_flags(data->regs);
+
+	if (sample_type & PERF_SAMPLE_IP) {
+		ip = perf_instruction_pointer(data->regs);
+		header.type |= PERF_SAMPLE_IP;
+		header.size += sizeof(ip);
+	}
+
+	if (sample_type & PERF_SAMPLE_TID) {
+		/* namespace issues */
+		tid_entry.pid = perf_counter_pid(counter, current);
+		tid_entry.tid = perf_counter_tid(counter, current);
+
+		header.type |= PERF_SAMPLE_TID;
+		header.size += sizeof(tid_entry);
+	}
+
+	if (sample_type & PERF_SAMPLE_TIME) {
+		/*
+		 * Maybe do better on x86 and provide cpu_clock_nmi()
+		 */
+		time = sched_clock();
+
+		header.type |= PERF_SAMPLE_TIME;
+		header.size += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_ADDR) {
+		header.type |= PERF_SAMPLE_ADDR;
+		header.size += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_ID) {
+		header.type |= PERF_SAMPLE_ID;
+		header.size += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_CPU) {
+		header.type |= PERF_SAMPLE_CPU;
+		header.size += sizeof(cpu_entry);
+
+		cpu_entry.cpu = raw_smp_processor_id();
+	}
+
+	if (sample_type & PERF_SAMPLE_PERIOD) {
+		header.type |= PERF_SAMPLE_PERIOD;
+		header.size += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_GROUP) {
+		header.type |= PERF_SAMPLE_GROUP;
+		header.size += sizeof(u64) +
+			counter->nr_siblings * sizeof(group_entry);
+	}
+
+	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+		callchain = perf_callchain(data->regs);
+
+		if (callchain) {
+			callchain_size = (1 + callchain->nr) * sizeof(u64);
+
+			header.type |= PERF_SAMPLE_CALLCHAIN;
+			header.size += callchain_size;
+		}
+	}
+
+	ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
+	if (ret)
+		return;
+
+	perf_output_put(&handle, header);
+
+	if (sample_type & PERF_SAMPLE_IP)
+		perf_output_put(&handle, ip);
+
+	if (sample_type & PERF_SAMPLE_TID)
+		perf_output_put(&handle, tid_entry);
+
+	if (sample_type & PERF_SAMPLE_TIME)
+		perf_output_put(&handle, time);
+
+	if (sample_type & PERF_SAMPLE_ADDR)
+		perf_output_put(&handle, data->addr);
+
+	if (sample_type & PERF_SAMPLE_ID)
+		perf_output_put(&handle, counter->id);
+
+	if (sample_type & PERF_SAMPLE_CPU)
+		perf_output_put(&handle, cpu_entry);
+
+	if (sample_type & PERF_SAMPLE_PERIOD)
+		perf_output_put(&handle, data->period);
+
+	/*
+	 * XXX PERF_SAMPLE_GROUP vs inherited counters seems difficult.
+	 */
+	if (sample_type & PERF_SAMPLE_GROUP) {
+		struct perf_counter *leader, *sub;
+		u64 nr = counter->nr_siblings;
+
+		perf_output_put(&handle, nr);
+
+		leader = counter->group_leader;
+		list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+			if (sub != counter)
+				sub->pmu->read(sub);
+
+			group_entry.id = sub->id;
+			group_entry.counter = atomic64_read(&sub->count);
+
+			perf_output_put(&handle, group_entry);
+		}
+	}
+
+	if (callchain)
+		perf_output_copy(&handle, callchain, callchain_size);
+
+	perf_output_end(&handle);
+}
+
+/*
+ * fork tracking
+ */
+
+struct perf_fork_event {
+	struct task_struct	*task;
+
+	struct {
+		struct perf_event_header	header;
+
+		u32				pid;
+		u32				ppid;
+	} event;
+};
+
+static void perf_counter_fork_output(struct perf_counter *counter,
+				     struct perf_fork_event *fork_event)
+{
+	struct perf_output_handle handle;
+	int size = fork_event->event.header.size;
+	struct task_struct *task = fork_event->task;
+	int ret = perf_output_begin(&handle, counter, size, 0, 0);
+
+	if (ret)
+		return;
+
+	fork_event->event.pid = perf_counter_pid(counter, task);
+	fork_event->event.ppid = perf_counter_pid(counter, task->real_parent);
+
+	perf_output_put(&handle, fork_event->event);
+	perf_output_end(&handle);
+}
+
+static int perf_counter_fork_match(struct perf_counter *counter)
+{
+	if (counter->attr.comm || counter->attr.mmap)
+		return 1;
+
+	return 0;
+}
+
+static void perf_counter_fork_ctx(struct perf_counter_context *ctx,
+				  struct perf_fork_event *fork_event)
+{
+	struct perf_counter *counter;
+
+	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
+		if (perf_counter_fork_match(counter))
+			perf_counter_fork_output(counter, fork_event);
+	}
+	rcu_read_unlock();
+}
+
+static void perf_counter_fork_event(struct perf_fork_event *fork_event)
+{
+	struct perf_cpu_context *cpuctx;
+	struct perf_counter_context *ctx;
+
+	cpuctx = &get_cpu_var(perf_cpu_context);
+	perf_counter_fork_ctx(&cpuctx->ctx, fork_event);
+	put_cpu_var(perf_cpu_context);
+
+	rcu_read_lock();
+	/*
+	 * doesn't really matter which of the child contexts the
+	 * events ends up in.
+	 */
+	ctx = rcu_dereference(current->perf_counter_ctxp);
+	if (ctx)
+		perf_counter_fork_ctx(ctx, fork_event);
+	rcu_read_unlock();
+}
+
+void perf_counter_fork(struct task_struct *task)
+{
+	struct perf_fork_event fork_event;
+
+	if (!atomic_read(&nr_comm_counters) &&
+	    !atomic_read(&nr_mmap_counters))
+		return;
+
+	fork_event = (struct perf_fork_event){
+		.task	= task,
+		.event  = {
+			.header = {
+				.type = PERF_EVENT_FORK,
+				.size = sizeof(fork_event.event),
+			},
+		},
+	};
+
+	perf_counter_fork_event(&fork_event);
+}
+
+/*
+ * comm tracking
+ */
+
+struct perf_comm_event {
+	struct task_struct	*task;
+	char			*comm;
+	int			comm_size;
+
+	struct {
+		struct perf_event_header	header;
+
+		u32				pid;
+		u32				tid;
+	} event;
+};
+
+static void perf_counter_comm_output(struct perf_counter *counter,
+				     struct perf_comm_event *comm_event)
+{
+	struct perf_output_handle handle;
+	int size = comm_event->event.header.size;
+	int ret = perf_output_begin(&handle, counter, size, 0, 0);
+
+	if (ret)
+		return;
+
+	comm_event->event.pid = perf_counter_pid(counter, comm_event->task);
+	comm_event->event.tid = perf_counter_tid(counter, comm_event->task);
+
+	perf_output_put(&handle, comm_event->event);
+	perf_output_copy(&handle, comm_event->comm,
+				   comm_event->comm_size);
+	perf_output_end(&handle);
+}
+
+static int perf_counter_comm_match(struct perf_counter *counter)
+{
+	if (counter->attr.comm)
+		return 1;
+
+	return 0;
+}
+
+static void perf_counter_comm_ctx(struct perf_counter_context *ctx,
+				  struct perf_comm_event *comm_event)
+{
+	struct perf_counter *counter;
+
+	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
+		if (perf_counter_comm_match(counter))
+			perf_counter_comm_output(counter, comm_event);
+	}
+	rcu_read_unlock();
+}
+
+static void perf_counter_comm_event(struct perf_comm_event *comm_event)
+{
+	struct perf_cpu_context *cpuctx;
+	struct perf_counter_context *ctx;
+	unsigned int size;
+	char *comm = comm_event->task->comm;
+
+	size = ALIGN(strlen(comm)+1, sizeof(u64));
+
+	comm_event->comm = comm;
+	comm_event->comm_size = size;
+
+	comm_event->event.header.size = sizeof(comm_event->event) + size;
+
+	cpuctx = &get_cpu_var(perf_cpu_context);
+	perf_counter_comm_ctx(&cpuctx->ctx, comm_event);
+	put_cpu_var(perf_cpu_context);
+
+	rcu_read_lock();
+	/*
+	 * doesn't really matter which of the child contexts the
+	 * events ends up in.
+	 */
+	ctx = rcu_dereference(current->perf_counter_ctxp);
+	if (ctx)
+		perf_counter_comm_ctx(ctx, comm_event);
+	rcu_read_unlock();
+}
+
+void perf_counter_comm(struct task_struct *task)
+{
+	struct perf_comm_event comm_event;
+
+	if (!atomic_read(&nr_comm_counters))
+		return;
+
+	comm_event = (struct perf_comm_event){
+		.task	= task,
+		.event  = {
+			.header = { .type = PERF_EVENT_COMM, },
+		},
+	};
+
+	perf_counter_comm_event(&comm_event);
+}
+
+/*
+ * mmap tracking
+ */
+
+struct perf_mmap_event {
+	struct vm_area_struct	*vma;
+
+	const char		*file_name;
+	int			file_size;
+
+	struct {
+		struct perf_event_header	header;
+
+		u32				pid;
+		u32				tid;
+		u64				start;
+		u64				len;
+		u64				pgoff;
+	} event;
+};
+
+static void perf_counter_mmap_output(struct perf_counter *counter,
+				     struct perf_mmap_event *mmap_event)
+{
+	struct perf_output_handle handle;
+	int size = mmap_event->event.header.size;
+	int ret = perf_output_begin(&handle, counter, size, 0, 0);
+
+	if (ret)
+		return;
+
+	mmap_event->event.pid = perf_counter_pid(counter, current);
+	mmap_event->event.tid = perf_counter_tid(counter, current);
+
+	perf_output_put(&handle, mmap_event->event);
+	perf_output_copy(&handle, mmap_event->file_name,
+				   mmap_event->file_size);
+	perf_output_end(&handle);
+}
+
+static int perf_counter_mmap_match(struct perf_counter *counter,
+				   struct perf_mmap_event *mmap_event)
+{
+	if (counter->attr.mmap)
+		return 1;
+
+	return 0;
+}
+
+static void perf_counter_mmap_ctx(struct perf_counter_context *ctx,
+				  struct perf_mmap_event *mmap_event)
+{
+	struct perf_counter *counter;
+
+	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
+		if (perf_counter_mmap_match(counter, mmap_event))
+			perf_counter_mmap_output(counter, mmap_event);
+	}
+	rcu_read_unlock();
+}
+
+static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event)
+{
+	struct perf_cpu_context *cpuctx;
+	struct perf_counter_context *ctx;
+	struct vm_area_struct *vma = mmap_event->vma;
+	struct file *file = vma->vm_file;
+	unsigned int size;
+	char tmp[16];
+	char *buf = NULL;
+	const char *name;
+
+	if (file) {
+		buf = kzalloc(PATH_MAX, GFP_KERNEL);
+		if (!buf) {
+			name = strncpy(tmp, "//enomem", sizeof(tmp));
+			goto got_name;
+		}
+		name = d_path(&file->f_path, buf, PATH_MAX);
+		if (IS_ERR(name)) {
+			name = strncpy(tmp, "//toolong", sizeof(tmp));
+			goto got_name;
+		}
+	} else {
+		name = arch_vma_name(mmap_event->vma);
+		if (name)
+			goto got_name;
+
+		if (!vma->vm_mm) {
+			name = strncpy(tmp, "[vdso]", sizeof(tmp));
+			goto got_name;
+		}
+
+		name = strncpy(tmp, "//anon", sizeof(tmp));
+		goto got_name;
+	}
+
+got_name:
+	size = ALIGN(strlen(name)+1, sizeof(u64));
+
+	mmap_event->file_name = name;
+	mmap_event->file_size = size;
+
+	mmap_event->event.header.size = sizeof(mmap_event->event) + size;
+
+	cpuctx = &get_cpu_var(perf_cpu_context);
+	perf_counter_mmap_ctx(&cpuctx->ctx, mmap_event);
+	put_cpu_var(perf_cpu_context);
+
+	rcu_read_lock();
+	/*
+	 * doesn't really matter which of the child contexts the
+	 * events ends up in.
+	 */
+	ctx = rcu_dereference(current->perf_counter_ctxp);
+	if (ctx)
+		perf_counter_mmap_ctx(ctx, mmap_event);
+	rcu_read_unlock();
+
+	kfree(buf);
+}
+
+void __perf_counter_mmap(struct vm_area_struct *vma)
+{
+	struct perf_mmap_event mmap_event;
+
+	if (!atomic_read(&nr_mmap_counters))
+		return;
+
+	mmap_event = (struct perf_mmap_event){
+		.vma	= vma,
+		.event  = {
+			.header = { .type = PERF_EVENT_MMAP, },
+			.start  = vma->vm_start,
+			.len    = vma->vm_end - vma->vm_start,
+			.pgoff  = vma->vm_pgoff,
+		},
+	};
+
+	perf_counter_mmap_event(&mmap_event);
+}
+
+/*
+ * Log sample_period changes so that analyzing tools can re-normalize the
+ * event flow.
+ */
+
+struct freq_event {
+	struct perf_event_header	header;
+	u64				time;
+	u64				id;
+	u64				period;
+};
+
+static void perf_log_period(struct perf_counter *counter, u64 period)
+{
+	struct perf_output_handle handle;
+	struct freq_event event;
+	int ret;
+
+	if (counter->hw.sample_period == period)
+		return;
+
+	if (counter->attr.sample_type & PERF_SAMPLE_PERIOD)
+		return;
+
+	event = (struct freq_event) {
+		.header = {
+			.type = PERF_EVENT_PERIOD,
+			.misc = 0,
+			.size = sizeof(event),
+		},
+		.time = sched_clock(),
+		.id = counter->id,
+		.period = period,
+	};
+
+	ret = perf_output_begin(&handle, counter, sizeof(event), 1, 0);
+	if (ret)
+		return;
+
+	perf_output_put(&handle, event);
+	perf_output_end(&handle);
+}
+
+/*
+ * IRQ throttle logging
+ */
+
+static void perf_log_throttle(struct perf_counter *counter, int enable)
+{
+	struct perf_output_handle handle;
+	int ret;
+
+	struct {
+		struct perf_event_header	header;
+		u64				time;
+		u64				id;
+	} throttle_event = {
+		.header = {
+			.type = PERF_EVENT_THROTTLE + 1,
+			.misc = 0,
+			.size = sizeof(throttle_event),
+		},
+		.time	= sched_clock(),
+		.id	= counter->id,
+	};
+
+	ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0);
+	if (ret)
+		return;
+
+	perf_output_put(&handle, throttle_event);
+	perf_output_end(&handle);
+}
+
+/*
+ * Generic counter overflow handling.
+ */
+
+int perf_counter_overflow(struct perf_counter *counter, int nmi,
+			  struct perf_sample_data *data)
+{
+	int events = atomic_read(&counter->event_limit);
+	int throttle = counter->pmu->unthrottle != NULL;
+	struct hw_perf_counter *hwc = &counter->hw;
+	int ret = 0;
+
+	if (!throttle) {
+		hwc->interrupts++;
+	} else {
+		if (hwc->interrupts != MAX_INTERRUPTS) {
+			hwc->interrupts++;
+			if (HZ * hwc->interrupts >
+					(u64)sysctl_perf_counter_sample_rate) {
+				hwc->interrupts = MAX_INTERRUPTS;
+				perf_log_throttle(counter, 0);
+				ret = 1;
+			}
+		} else {
+			/*
+			 * Keep re-disabling counters even though on the previous
+			 * pass we disabled it - just in case we raced with a
+			 * sched-in and the counter got enabled again:
+			 */
+			ret = 1;
+		}
+	}
+
+	if (counter->attr.freq) {
+		u64 now = sched_clock();
+		s64 delta = now - hwc->freq_stamp;
+
+		hwc->freq_stamp = now;
+
+		if (delta > 0 && delta < TICK_NSEC)
+			perf_adjust_period(counter, NSEC_PER_SEC / (int)delta);
+	}
+
+	/*
+	 * XXX event_limit might not quite work as expected on inherited
+	 * counters
+	 */
+
+	counter->pending_kill = POLL_IN;
+	if (events && atomic_dec_and_test(&counter->event_limit)) {
+		ret = 1;
+		counter->pending_kill = POLL_HUP;
+		if (nmi) {
+			counter->pending_disable = 1;
+			perf_pending_queue(&counter->pending,
+					   perf_pending_counter);
+		} else
+			perf_counter_disable(counter);
+	}
+
+	perf_counter_output(counter, nmi, data);
+	return ret;
+}
+
+/*
+ * Generic software counter infrastructure
+ */
+
+static void perf_swcounter_update(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	u64 prev, now;
+	s64 delta;
+
+again:
+	prev = atomic64_read(&hwc->prev_count);
+	now = atomic64_read(&hwc->count);
+	if (atomic64_cmpxchg(&hwc->prev_count, prev, now) != prev)
+		goto again;
+
+	delta = now - prev;
+
+	atomic64_add(delta, &counter->count);
+	atomic64_sub(delta, &hwc->period_left);
+}
+
+static void perf_swcounter_set_period(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_add(period, &hwc->period_left);
+		hwc->last_period = period;
+	}
+
+	atomic64_set(&hwc->prev_count, -left);
+	atomic64_set(&hwc->count, -left);
+}
+
+static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
+{
+	enum hrtimer_restart ret = HRTIMER_RESTART;
+	struct perf_sample_data data;
+	struct perf_counter *counter;
+	u64 period;
+
+	counter	= container_of(hrtimer, struct perf_counter, hw.hrtimer);
+	counter->pmu->read(counter);
+
+	data.addr = 0;
+	data.regs = get_irq_regs();
+	/*
+	 * In case we exclude kernel IPs or are somehow not in interrupt
+	 * context, provide the next best thing, the user IP.
+	 */
+	if ((counter->attr.exclude_kernel || !data.regs) &&
+			!counter->attr.exclude_user)
+		data.regs = task_pt_regs(current);
+
+	if (data.regs) {
+		if (perf_counter_overflow(counter, 0, &data))
+			ret = HRTIMER_NORESTART;
+	}
+
+	period = max_t(u64, 10000, counter->hw.sample_period);
+	hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+
+	return ret;
+}
+
+static void perf_swcounter_overflow(struct perf_counter *counter,
+				    int nmi, struct pt_regs *regs, u64 addr)
+{
+	struct perf_sample_data data = {
+		.regs	= regs,
+		.addr	= addr,
+		.period	= counter->hw.last_period,
+	};
+
+	perf_swcounter_update(counter);
+	perf_swcounter_set_period(counter);
+	if (perf_counter_overflow(counter, nmi, &data))
+		/* soft-disable the counter */
+		;
+
+}
+
+static int perf_swcounter_is_counting(struct perf_counter *counter)
+{
+	struct perf_counter_context *ctx;
+	unsigned long flags;
+	int count;
+
+	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
+		return 1;
+
+	if (counter->state != PERF_COUNTER_STATE_INACTIVE)
+		return 0;
+
+	/*
+	 * If the counter is inactive, it could be just because
+	 * its task is scheduled out, or because it's in a group
+	 * which could not go on the PMU.  We want to count in
+	 * the first case but not the second.  If the context is
+	 * currently active then an inactive software counter must
+	 * be the second case.  If it's not currently active then
+	 * we need to know whether the counter was active when the
+	 * context was last active, which we can determine by
+	 * comparing counter->tstamp_stopped with ctx->time.
+	 *
+	 * We are within an RCU read-side critical section,
+	 * which protects the existence of *ctx.
+	 */
+	ctx = counter->ctx;
+	spin_lock_irqsave(&ctx->lock, flags);
+	count = 1;
+	/* Re-check state now we have the lock */
+	if (counter->state < PERF_COUNTER_STATE_INACTIVE ||
+	    counter->ctx->is_active ||
+	    counter->tstamp_stopped < ctx->time)
+		count = 0;
+	spin_unlock_irqrestore(&ctx->lock, flags);
+	return count;
+}
+
+static int perf_swcounter_match(struct perf_counter *counter,
+				enum perf_type_id type,
+				u32 event, struct pt_regs *regs)
+{
+	if (!perf_swcounter_is_counting(counter))
+		return 0;
+
+	if (counter->attr.type != type)
+		return 0;
+	if (counter->attr.config != event)
+		return 0;
+
+	if (regs) {
+		if (counter->attr.exclude_user && user_mode(regs))
+			return 0;
+
+		if (counter->attr.exclude_kernel && !user_mode(regs))
+			return 0;
+	}
+
+	return 1;
+}
+
+static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
+			       int nmi, struct pt_regs *regs, u64 addr)
+{
+	int neg = atomic64_add_negative(nr, &counter->hw.count);
+
+	if (counter->hw.sample_period && !neg && regs)
+		perf_swcounter_overflow(counter, nmi, regs, addr);
+}
+
+static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
+				     enum perf_type_id type, u32 event,
+				     u64 nr, int nmi, struct pt_regs *regs,
+				     u64 addr)
+{
+	struct perf_counter *counter;
+
+	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
+		if (perf_swcounter_match(counter, type, event, regs))
+			perf_swcounter_add(counter, nr, nmi, regs, addr);
+	}
+	rcu_read_unlock();
+}
+
+static int *perf_swcounter_recursion_context(struct perf_cpu_context *cpuctx)
+{
+	if (in_nmi())
+		return &cpuctx->recursion[3];
+
+	if (in_irq())
+		return &cpuctx->recursion[2];
+
+	if (in_softirq())
+		return &cpuctx->recursion[1];
+
+	return &cpuctx->recursion[0];
+}
+
+static void __perf_swcounter_event(enum perf_type_id type, u32 event,
+				   u64 nr, int nmi, struct pt_regs *regs,
+				   u64 addr)
+{
+	struct perf_cpu_context *cpuctx = &get_cpu_var(perf_cpu_context);
+	int *recursion = perf_swcounter_recursion_context(cpuctx);
+	struct perf_counter_context *ctx;
+
+	if (*recursion)
+		goto out;
+
+	(*recursion)++;
+	barrier();
+
+	perf_swcounter_ctx_event(&cpuctx->ctx, type, event,
+				 nr, nmi, regs, addr);
+	rcu_read_lock();
+	/*
+	 * doesn't really matter which of the child contexts the
+	 * events ends up in.
+	 */
+	ctx = rcu_dereference(current->perf_counter_ctxp);
+	if (ctx)
+		perf_swcounter_ctx_event(ctx, type, event, nr, nmi, regs, addr);
+	rcu_read_unlock();
+
+	barrier();
+	(*recursion)--;
+
+out:
+	put_cpu_var(perf_cpu_context);
+}
+
+void
+perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+{
+	__perf_swcounter_event(PERF_TYPE_SOFTWARE, event, nr, nmi, regs, addr);
+}
+
+static void perf_swcounter_read(struct perf_counter *counter)
+{
+	perf_swcounter_update(counter);
+}
+
+static int perf_swcounter_enable(struct perf_counter *counter)
+{
+	perf_swcounter_set_period(counter);
+	return 0;
+}
+
+static void perf_swcounter_disable(struct perf_counter *counter)
+{
+	perf_swcounter_update(counter);
+}
+
+static const struct pmu perf_ops_generic = {
+	.enable		= perf_swcounter_enable,
+	.disable	= perf_swcounter_disable,
+	.read		= perf_swcounter_read,
+};
+
+/*
+ * Software counter: cpu wall time clock
+ */
+
+static void cpu_clock_perf_counter_update(struct perf_counter *counter)
+{
+	int cpu = raw_smp_processor_id();
+	s64 prev;
+	u64 now;
+
+	now = cpu_clock(cpu);
+	prev = atomic64_read(&counter->hw.prev_count);
+	atomic64_set(&counter->hw.prev_count, now);
+	atomic64_add(now - prev, &counter->count);
+}
+
+static int cpu_clock_perf_counter_enable(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	int cpu = raw_smp_processor_id();
+
+	atomic64_set(&hwc->prev_count, cpu_clock(cpu));
+	hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hwc->hrtimer.function = perf_swcounter_hrtimer;
+	if (hwc->sample_period) {
+		u64 period = max_t(u64, 10000, hwc->sample_period);
+		__hrtimer_start_range_ns(&hwc->hrtimer,
+				ns_to_ktime(period), 0,
+				HRTIMER_MODE_REL, 0);
+	}
+
+	return 0;
+}
+
+static void cpu_clock_perf_counter_disable(struct perf_counter *counter)
+{
+	if (counter->hw.sample_period)
+		hrtimer_cancel(&counter->hw.hrtimer);
+	cpu_clock_perf_counter_update(counter);
+}
+
+static void cpu_clock_perf_counter_read(struct perf_counter *counter)
+{
+	cpu_clock_perf_counter_update(counter);
+}
+
+static const struct pmu perf_ops_cpu_clock = {
+	.enable		= cpu_clock_perf_counter_enable,
+	.disable	= cpu_clock_perf_counter_disable,
+	.read		= cpu_clock_perf_counter_read,
+};
+
+/*
+ * Software counter: task time clock
+ */
+
+static void task_clock_perf_counter_update(struct perf_counter *counter, u64 now)
+{
+	u64 prev;
+	s64 delta;
+
+	prev = atomic64_xchg(&counter->hw.prev_count, now);
+	delta = now - prev;
+	atomic64_add(delta, &counter->count);
+}
+
+static int task_clock_perf_counter_enable(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	u64 now;
+
+	now = counter->ctx->time;
+
+	atomic64_set(&hwc->prev_count, now);
+	hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hwc->hrtimer.function = perf_swcounter_hrtimer;
+	if (hwc->sample_period) {
+		u64 period = max_t(u64, 10000, hwc->sample_period);
+		__hrtimer_start_range_ns(&hwc->hrtimer,
+				ns_to_ktime(period), 0,
+				HRTIMER_MODE_REL, 0);
+	}
+
+	return 0;
+}
+
+static void task_clock_perf_counter_disable(struct perf_counter *counter)
+{
+	if (counter->hw.sample_period)
+		hrtimer_cancel(&counter->hw.hrtimer);
+	task_clock_perf_counter_update(counter, counter->ctx->time);
+
+}
+
+static void task_clock_perf_counter_read(struct perf_counter *counter)
+{
+	u64 time;
+
+	if (!in_nmi()) {
+		update_context_time(counter->ctx);
+		time = counter->ctx->time;
+	} else {
+		u64 now = perf_clock();
+		u64 delta = now - counter->ctx->timestamp;
+		time = counter->ctx->time + delta;
+	}
+
+	task_clock_perf_counter_update(counter, time);
+}
+
+static const struct pmu perf_ops_task_clock = {
+	.enable		= task_clock_perf_counter_enable,
+	.disable	= task_clock_perf_counter_disable,
+	.read		= task_clock_perf_counter_read,
+};
+
+/*
+ * Software counter: cpu migrations
+ */
+void perf_counter_task_migration(struct task_struct *task, int cpu)
+{
+	struct perf_cpu_context *cpuctx = &per_cpu(perf_cpu_context, cpu);
+	struct perf_counter_context *ctx;
+
+	perf_swcounter_ctx_event(&cpuctx->ctx, PERF_TYPE_SOFTWARE,
+				 PERF_COUNT_SW_CPU_MIGRATIONS,
+				 1, 1, NULL, 0);
+
+	ctx = perf_pin_task_context(task);
+	if (ctx) {
+		perf_swcounter_ctx_event(ctx, PERF_TYPE_SOFTWARE,
+					 PERF_COUNT_SW_CPU_MIGRATIONS,
+					 1, 1, NULL, 0);
+		perf_unpin_context(ctx);
+	}
+}
+
+#ifdef CONFIG_EVENT_PROFILE
+void perf_tpcounter_event(int event_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (!regs)
+		regs = task_pt_regs(current);
+
+	__perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, 1, 1, regs, 0);
+}
+EXPORT_SYMBOL_GPL(perf_tpcounter_event);
+
+extern int ftrace_profile_enable(int);
+extern void ftrace_profile_disable(int);
+
+static void tp_perf_counter_destroy(struct perf_counter *counter)
+{
+	ftrace_profile_disable(perf_event_id(&counter->attr));
+}
+
+static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
+{
+	int event_id = perf_event_id(&counter->attr);
+	int ret;
+
+	ret = ftrace_profile_enable(event_id);
+	if (ret)
+		return NULL;
+
+	counter->destroy = tp_perf_counter_destroy;
+
+	return &perf_ops_generic;
+}
+#else
+static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
+{
+	return NULL;
+}
+#endif
+
+static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
+{
+	const struct pmu *pmu = NULL;
+
+	/*
+	 * Software counters (currently) can't in general distinguish
+	 * between user, kernel and hypervisor events.
+	 * However, context switches and cpu migrations are considered
+	 * to be kernel events, and page faults are never hypervisor
+	 * events.
+	 */
+	switch (counter->attr.config) {
+	case PERF_COUNT_SW_CPU_CLOCK:
+		pmu = &perf_ops_cpu_clock;
+
+		break;
+	case PERF_COUNT_SW_TASK_CLOCK:
+		/*
+		 * If the user instantiates this as a per-cpu counter,
+		 * use the cpu_clock counter instead.
+		 */
+		if (counter->ctx->task)
+			pmu = &perf_ops_task_clock;
+		else
+			pmu = &perf_ops_cpu_clock;
+
+		break;
+	case PERF_COUNT_SW_PAGE_FAULTS:
+	case PERF_COUNT_SW_PAGE_FAULTS_MIN:
+	case PERF_COUNT_SW_PAGE_FAULTS_MAJ:
+	case PERF_COUNT_SW_CONTEXT_SWITCHES:
+	case PERF_COUNT_SW_CPU_MIGRATIONS:
+		pmu = &perf_ops_generic;
+		break;
+	}
+
+	return pmu;
+}
+
+/*
+ * Allocate and initialize a counter structure
+ */
+static struct perf_counter *
+perf_counter_alloc(struct perf_counter_attr *attr,
+		   int cpu,
+		   struct perf_counter_context *ctx,
+		   struct perf_counter *group_leader,
+		   gfp_t gfpflags)
+{
+	const struct pmu *pmu;
+	struct perf_counter *counter;
+	struct hw_perf_counter *hwc;
+	long err;
+
+	counter = kzalloc(sizeof(*counter), gfpflags);
+	if (!counter)
+		return ERR_PTR(-ENOMEM);
+
+	/*
+	 * Single counters are their own group leaders, with an
+	 * empty sibling list:
+	 */
+	if (!group_leader)
+		group_leader = counter;
+
+	mutex_init(&counter->child_mutex);
+	INIT_LIST_HEAD(&counter->child_list);
+
+	INIT_LIST_HEAD(&counter->list_entry);
+	INIT_LIST_HEAD(&counter->event_entry);
+	INIT_LIST_HEAD(&counter->sibling_list);
+	init_waitqueue_head(&counter->waitq);
+
+	mutex_init(&counter->mmap_mutex);
+
+	counter->cpu		= cpu;
+	counter->attr		= *attr;
+	counter->group_leader	= group_leader;
+	counter->pmu		= NULL;
+	counter->ctx		= ctx;
+	counter->oncpu		= -1;
+
+	counter->ns		= get_pid_ns(current->nsproxy->pid_ns);
+	counter->id		= atomic64_inc_return(&perf_counter_id);
+
+	counter->state		= PERF_COUNTER_STATE_INACTIVE;
+
+	if (attr->disabled)
+		counter->state = PERF_COUNTER_STATE_OFF;
+
+	pmu = NULL;
+
+	hwc = &counter->hw;
+	hwc->sample_period = attr->sample_period;
+	if (attr->freq && attr->sample_freq)
+		hwc->sample_period = 1;
+
+	atomic64_set(&hwc->period_left, hwc->sample_period);
+
+	/*
+	 * we currently do not support PERF_SAMPLE_GROUP on inherited counters
+	 */
+	if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
+		goto done;
+
+	switch (attr->type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HARDWARE:
+	case PERF_TYPE_HW_CACHE:
+		pmu = hw_perf_counter_init(counter);
+		break;
+
+	case PERF_TYPE_SOFTWARE:
+		pmu = sw_perf_counter_init(counter);
+		break;
+
+	case PERF_TYPE_TRACEPOINT:
+		pmu = tp_perf_counter_init(counter);
+		break;
+
+	default:
+		break;
+	}
+done:
+	err = 0;
+	if (!pmu)
+		err = -EINVAL;
+	else if (IS_ERR(pmu))
+		err = PTR_ERR(pmu);
+
+	if (err) {
+		if (counter->ns)
+			put_pid_ns(counter->ns);
+		kfree(counter);
+		return ERR_PTR(err);
+	}
+
+	counter->pmu = pmu;
+
+	atomic_inc(&nr_counters);
+	if (counter->attr.mmap)
+		atomic_inc(&nr_mmap_counters);
+	if (counter->attr.comm)
+		atomic_inc(&nr_comm_counters);
+
+	return counter;
+}
+
+static int perf_copy_attr(struct perf_counter_attr __user *uattr,
+			  struct perf_counter_attr *attr)
+{
+	int ret;
+	u32 size;
+
+	if (!access_ok(VERIFY_WRITE, uattr, PERF_ATTR_SIZE_VER0))
+		return -EFAULT;
+
+	/*
+	 * zero the full structure, so that a short copy will be nice.
+	 */
+	memset(attr, 0, sizeof(*attr));
+
+	ret = get_user(size, &uattr->size);
+	if (ret)
+		return ret;
+
+	if (size > PAGE_SIZE)	/* silly large */
+		goto err_size;
+
+	if (!size)		/* abi compat */
+		size = PERF_ATTR_SIZE_VER0;
+
+	if (size < PERF_ATTR_SIZE_VER0)
+		goto err_size;
+
+	/*
+	 * If we're handed a bigger struct than we know of,
+	 * ensure all the unknown bits are 0.
+	 */
+	if (size > sizeof(*attr)) {
+		unsigned long val;
+		unsigned long __user *addr;
+		unsigned long __user *end;
+
+		addr = PTR_ALIGN((void __user *)uattr + sizeof(*attr),
+				sizeof(unsigned long));
+		end  = PTR_ALIGN((void __user *)uattr + size,
+				sizeof(unsigned long));
+
+		for (; addr < end; addr += sizeof(unsigned long)) {
+			ret = get_user(val, addr);
+			if (ret)
+				return ret;
+			if (val)
+				goto err_size;
+		}
+	}
+
+	ret = copy_from_user(attr, uattr, size);
+	if (ret)
+		return -EFAULT;
+
+	/*
+	 * If the type exists, the corresponding creation will verify
+	 * the attr->config.
+	 */
+	if (attr->type >= PERF_TYPE_MAX)
+		return -EINVAL;
+
+	if (attr->__reserved_1 || attr->__reserved_2 || attr->__reserved_3)
+		return -EINVAL;
+
+	if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
+		return -EINVAL;
+
+	if (attr->read_format & ~(PERF_FORMAT_MAX-1))
+		return -EINVAL;
+
+out:
+	return ret;
+
+err_size:
+	put_user(sizeof(*attr), &uattr->size);
+	ret = -E2BIG;
+	goto out;
+}
+
+/**
+ * sys_perf_counter_open - open a performance counter, associate it to a task/cpu
+ *
+ * @attr_uptr:	event type attributes for monitoring/sampling
+ * @pid:		target pid
+ * @cpu:		target cpu
+ * @group_fd:		group leader counter fd
+ */
+SYSCALL_DEFINE5(perf_counter_open,
+		struct perf_counter_attr __user *, attr_uptr,
+		pid_t, pid, int, cpu, int, group_fd, unsigned long, flags)
+{
+	struct perf_counter *counter, *group_leader;
+	struct perf_counter_attr attr;
+	struct perf_counter_context *ctx;
+	struct file *counter_file = NULL;
+	struct file *group_file = NULL;
+	int fput_needed = 0;
+	int fput_needed2 = 0;
+	int ret;
+
+	/* for future expandability... */
+	if (flags)
+		return -EINVAL;
+
+	ret = perf_copy_attr(attr_uptr, &attr);
+	if (ret)
+		return ret;
+
+	if (!attr.exclude_kernel) {
+		if (perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN))
+			return -EACCES;
+	}
+
+	if (attr.freq) {
+		if (attr.sample_freq > sysctl_perf_counter_sample_rate)
+			return -EINVAL;
+	}
+
+	/*
+	 * Get the target context (task or percpu):
+	 */
+	ctx = find_get_context(pid, cpu);
+	if (IS_ERR(ctx))
+		return PTR_ERR(ctx);
+
+	/*
+	 * Look up the group leader (we will attach this counter to it):
+	 */
+	group_leader = NULL;
+	if (group_fd != -1) {
+		ret = -EINVAL;
+		group_file = fget_light(group_fd, &fput_needed);
+		if (!group_file)
+			goto err_put_context;
+		if (group_file->f_op != &perf_fops)
+			goto err_put_context;
+
+		group_leader = group_file->private_data;
+		/*
+		 * Do not allow a recursive hierarchy (this new sibling
+		 * becoming part of another group-sibling):
+		 */
+		if (group_leader->group_leader != group_leader)
+			goto err_put_context;
+		/*
+		 * Do not allow to attach to a group in a different
+		 * task or CPU context:
+		 */
+		if (group_leader->ctx != ctx)
+			goto err_put_context;
+		/*
+		 * Only a group leader can be exclusive or pinned
+		 */
+		if (attr.exclusive || attr.pinned)
+			goto err_put_context;
+	}
+
+	counter = perf_counter_alloc(&attr, cpu, ctx, group_leader,
+				     GFP_KERNEL);
+	ret = PTR_ERR(counter);
+	if (IS_ERR(counter))
+		goto err_put_context;
+
+	ret = anon_inode_getfd("[perf_counter]", &perf_fops, counter, 0);
+	if (ret < 0)
+		goto err_free_put_context;
+
+	counter_file = fget_light(ret, &fput_needed2);
+	if (!counter_file)
+		goto err_free_put_context;
+
+	counter->filp = counter_file;
+	WARN_ON_ONCE(ctx->parent_ctx);
+	mutex_lock(&ctx->mutex);
+	perf_install_in_context(ctx, counter, cpu);
+	++ctx->generation;
+	mutex_unlock(&ctx->mutex);
+
+	counter->owner = current;
+	get_task_struct(current);
+	mutex_lock(&current->perf_counter_mutex);
+	list_add_tail(&counter->owner_entry, &current->perf_counter_list);
+	mutex_unlock(&current->perf_counter_mutex);
+
+	fput_light(counter_file, fput_needed2);
+
+out_fput:
+	fput_light(group_file, fput_needed);
+
+	return ret;
+
+err_free_put_context:
+	kfree(counter);
+
+err_put_context:
+	put_ctx(ctx);
+
+	goto out_fput;
+}
+
+/*
+ * inherit a counter from parent task to child task:
+ */
+static struct perf_counter *
+inherit_counter(struct perf_counter *parent_counter,
+	      struct task_struct *parent,
+	      struct perf_counter_context *parent_ctx,
+	      struct task_struct *child,
+	      struct perf_counter *group_leader,
+	      struct perf_counter_context *child_ctx)
+{
+	struct perf_counter *child_counter;
+
+	/*
+	 * Instead of creating recursive hierarchies of counters,
+	 * we link inherited counters back to the original parent,
+	 * which has a filp for sure, which we use as the reference
+	 * count:
+	 */
+	if (parent_counter->parent)
+		parent_counter = parent_counter->parent;
+
+	child_counter = perf_counter_alloc(&parent_counter->attr,
+					   parent_counter->cpu, child_ctx,
+					   group_leader, GFP_KERNEL);
+	if (IS_ERR(child_counter))
+		return child_counter;
+	get_ctx(child_ctx);
+
+	/*
+	 * Make the child state follow the state of the parent counter,
+	 * not its attr.disabled bit.  We hold the parent's mutex,
+	 * so we won't race with perf_counter_{en, dis}able_family.
+	 */
+	if (parent_counter->state >= PERF_COUNTER_STATE_INACTIVE)
+		child_counter->state = PERF_COUNTER_STATE_INACTIVE;
+	else
+		child_counter->state = PERF_COUNTER_STATE_OFF;
+
+	if (parent_counter->attr.freq)
+		child_counter->hw.sample_period = parent_counter->hw.sample_period;
+
+	/*
+	 * Link it up in the child's context:
+	 */
+	add_counter_to_ctx(child_counter, child_ctx);
+
+	child_counter->parent = parent_counter;
+	/*
+	 * inherit into child's child as well:
+	 */
+	child_counter->attr.inherit = 1;
+
+	/*
+	 * Get a reference to the parent filp - we will fput it
+	 * when the child counter exits. This is safe to do because
+	 * we are in the parent and we know that the filp still
+	 * exists and has a nonzero count:
+	 */
+	atomic_long_inc(&parent_counter->filp->f_count);
+
+	/*
+	 * Link this into the parent counter's child list
+	 */
+	WARN_ON_ONCE(parent_counter->ctx->parent_ctx);
+	mutex_lock(&parent_counter->child_mutex);
+	list_add_tail(&child_counter->child_list, &parent_counter->child_list);
+	mutex_unlock(&parent_counter->child_mutex);
+
+	return child_counter;
+}
+
+static int inherit_group(struct perf_counter *parent_counter,
+	      struct task_struct *parent,
+	      struct perf_counter_context *parent_ctx,
+	      struct task_struct *child,
+	      struct perf_counter_context *child_ctx)
+{
+	struct perf_counter *leader;
+	struct perf_counter *sub;
+	struct perf_counter *child_ctr;
+
+	leader = inherit_counter(parent_counter, parent, parent_ctx,
+				 child, NULL, child_ctx);
+	if (IS_ERR(leader))
+		return PTR_ERR(leader);
+	list_for_each_entry(sub, &parent_counter->sibling_list, list_entry) {
+		child_ctr = inherit_counter(sub, parent, parent_ctx,
+					    child, leader, child_ctx);
+		if (IS_ERR(child_ctr))
+			return PTR_ERR(child_ctr);
+	}
+	return 0;
+}
+
+static void sync_child_counter(struct perf_counter *child_counter,
+			       struct perf_counter *parent_counter)
+{
+	u64 child_val;
+
+	child_val = atomic64_read(&child_counter->count);
+
+	/*
+	 * Add back the child's count to the parent's count:
+	 */
+	atomic64_add(child_val, &parent_counter->count);
+	atomic64_add(child_counter->total_time_enabled,
+		     &parent_counter->child_total_time_enabled);
+	atomic64_add(child_counter->total_time_running,
+		     &parent_counter->child_total_time_running);
+
+	/*
+	 * Remove this counter from the parent's list
+	 */
+	WARN_ON_ONCE(parent_counter->ctx->parent_ctx);
+	mutex_lock(&parent_counter->child_mutex);
+	list_del_init(&child_counter->child_list);
+	mutex_unlock(&parent_counter->child_mutex);
+
+	/*
+	 * Release the parent counter, if this was the last
+	 * reference to it.
+	 */
+	fput(parent_counter->filp);
+}
+
+static void
+__perf_counter_exit_task(struct perf_counter *child_counter,
+			 struct perf_counter_context *child_ctx)
+{
+	struct perf_counter *parent_counter;
+
+	update_counter_times(child_counter);
+	perf_counter_remove_from_context(child_counter);
+
+	parent_counter = child_counter->parent;
+	/*
+	 * It can happen that parent exits first, and has counters
+	 * that are still around due to the child reference. These
+	 * counters need to be zapped - but otherwise linger.
+	 */
+	if (parent_counter) {
+		sync_child_counter(child_counter, parent_counter);
+		free_counter(child_counter);
+	}
+}
+
+/*
+ * When a child task exits, feed back counter values to parent counters.
+ */
+void perf_counter_exit_task(struct task_struct *child)
+{
+	struct perf_counter *child_counter, *tmp;
+	struct perf_counter_context *child_ctx;
+	unsigned long flags;
+
+	if (likely(!child->perf_counter_ctxp))
+		return;
+
+	local_irq_save(flags);
+	/*
+	 * We can't reschedule here because interrupts are disabled,
+	 * and either child is current or it is a task that can't be
+	 * scheduled, so we are now safe from rescheduling changing
+	 * our context.
+	 */
+	child_ctx = child->perf_counter_ctxp;
+	__perf_counter_task_sched_out(child_ctx);
+
+	/*
+	 * Take the context lock here so that if find_get_context is
+	 * reading child->perf_counter_ctxp, we wait until it has
+	 * incremented the context's refcount before we do put_ctx below.
+	 */
+	spin_lock(&child_ctx->lock);
+	child->perf_counter_ctxp = NULL;
+	if (child_ctx->parent_ctx) {
+		/*
+		 * This context is a clone; unclone it so it can't get
+		 * swapped to another process while we're removing all
+		 * the counters from it.
+		 */
+		put_ctx(child_ctx->parent_ctx);
+		child_ctx->parent_ctx = NULL;
+	}
+	spin_unlock(&child_ctx->lock);
+	local_irq_restore(flags);
+
+	/*
+	 * We can recurse on the same lock type through:
+	 *
+	 *   __perf_counter_exit_task()
+	 *     sync_child_counter()
+	 *       fput(parent_counter->filp)
+	 *         perf_release()
+	 *           mutex_lock(&ctx->mutex)
+	 *
+	 * But since its the parent context it won't be the same instance.
+	 */
+	mutex_lock_nested(&child_ctx->mutex, SINGLE_DEPTH_NESTING);
+
+again:
+	list_for_each_entry_safe(child_counter, tmp, &child_ctx->counter_list,
+				 list_entry)
+		__perf_counter_exit_task(child_counter, child_ctx);
+
+	/*
+	 * If the last counter was a group counter, it will have appended all
+	 * its siblings to the list, but we obtained 'tmp' before that which
+	 * will still point to the list head terminating the iteration.
+	 */
+	if (!list_empty(&child_ctx->counter_list))
+		goto again;
+
+	mutex_unlock(&child_ctx->mutex);
+
+	put_ctx(child_ctx);
+}
+
+/*
+ * free an unexposed, unused context as created by inheritance by
+ * init_task below, used by fork() in case of fail.
+ */
+void perf_counter_free_task(struct task_struct *task)
+{
+	struct perf_counter_context *ctx = task->perf_counter_ctxp;
+	struct perf_counter *counter, *tmp;
+
+	if (!ctx)
+		return;
+
+	mutex_lock(&ctx->mutex);
+again:
+	list_for_each_entry_safe(counter, tmp, &ctx->counter_list, list_entry) {
+		struct perf_counter *parent = counter->parent;
+
+		if (WARN_ON_ONCE(!parent))
+			continue;
+
+		mutex_lock(&parent->child_mutex);
+		list_del_init(&counter->child_list);
+		mutex_unlock(&parent->child_mutex);
+
+		fput(parent->filp);
+
+		list_del_counter(counter, ctx);
+		free_counter(counter);
+	}
+
+	if (!list_empty(&ctx->counter_list))
+		goto again;
+
+	mutex_unlock(&ctx->mutex);
+
+	put_ctx(ctx);
+}
+
+/*
+ * Initialize the perf_counter context in task_struct
+ */
+int perf_counter_init_task(struct task_struct *child)
+{
+	struct perf_counter_context *child_ctx, *parent_ctx;
+	struct perf_counter_context *cloned_ctx;
+	struct perf_counter *counter;
+	struct task_struct *parent = current;
+	int inherited_all = 1;
+	int ret = 0;
+
+	child->perf_counter_ctxp = NULL;
+
+	mutex_init(&child->perf_counter_mutex);
+	INIT_LIST_HEAD(&child->perf_counter_list);
+
+	if (likely(!parent->perf_counter_ctxp))
+		return 0;
+
+	/*
+	 * This is executed from the parent task context, so inherit
+	 * counters that have been marked for cloning.
+	 * First allocate and initialize a context for the child.
+	 */
+
+	child_ctx = kmalloc(sizeof(struct perf_counter_context), GFP_KERNEL);
+	if (!child_ctx)
+		return -ENOMEM;
+
+	__perf_counter_init_context(child_ctx, child);
+	child->perf_counter_ctxp = child_ctx;
+	get_task_struct(child);
+
+	/*
+	 * If the parent's context is a clone, pin it so it won't get
+	 * swapped under us.
+	 */
+	parent_ctx = perf_pin_task_context(parent);
+
+	/*
+	 * No need to check if parent_ctx != NULL here; since we saw
+	 * it non-NULL earlier, the only reason for it to become NULL
+	 * is if we exit, and since we're currently in the middle of
+	 * a fork we can't be exiting at the same time.
+	 */
+
+	/*
+	 * Lock the parent list. No need to lock the child - not PID
+	 * hashed yet and not running, so nobody can access it.
+	 */
+	mutex_lock(&parent_ctx->mutex);
+
+	/*
+	 * We dont have to disable NMIs - we are only looking at
+	 * the list, not manipulating it:
+	 */
+	list_for_each_entry_rcu(counter, &parent_ctx->event_list, event_entry) {
+		if (counter != counter->group_leader)
+			continue;
+
+		if (!counter->attr.inherit) {
+			inherited_all = 0;
+			continue;
+		}
+
+		ret = inherit_group(counter, parent, parent_ctx,
+					     child, child_ctx);
+		if (ret) {
+			inherited_all = 0;
+			break;
+		}
+	}
+
+	if (inherited_all) {
+		/*
+		 * Mark the child context as a clone of the parent
+		 * context, or of whatever the parent is a clone of.
+		 * Note that if the parent is a clone, it could get
+		 * uncloned at any point, but that doesn't matter
+		 * because the list of counters and the generation
+		 * count can't have changed since we took the mutex.
+		 */
+		cloned_ctx = rcu_dereference(parent_ctx->parent_ctx);
+		if (cloned_ctx) {
+			child_ctx->parent_ctx = cloned_ctx;
+			child_ctx->parent_gen = parent_ctx->parent_gen;
+		} else {
+			child_ctx->parent_ctx = parent_ctx;
+			child_ctx->parent_gen = parent_ctx->generation;
+		}
+		get_ctx(child_ctx->parent_ctx);
+	}
+
+	mutex_unlock(&parent_ctx->mutex);
+
+	perf_unpin_context(parent_ctx);
+
+	return ret;
+}
+
+static void __cpuinit perf_counter_init_cpu(int cpu)
+{
+	struct perf_cpu_context *cpuctx;
+
+	cpuctx = &per_cpu(perf_cpu_context, cpu);
+	__perf_counter_init_context(&cpuctx->ctx, NULL);
+
+	spin_lock(&perf_resource_lock);
+	cpuctx->max_pertask = perf_max_counters - perf_reserved_percpu;
+	spin_unlock(&perf_resource_lock);
+
+	hw_perf_counter_setup(cpu);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __perf_counter_exit_cpu(void *info)
+{
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+	struct perf_counter_context *ctx = &cpuctx->ctx;
+	struct perf_counter *counter, *tmp;
+
+	list_for_each_entry_safe(counter, tmp, &ctx->counter_list, list_entry)
+		__perf_counter_remove_from_context(counter);
+}
+static void perf_counter_exit_cpu(int cpu)
+{
+	struct perf_cpu_context *cpuctx = &per_cpu(perf_cpu_context, cpu);
+	struct perf_counter_context *ctx = &cpuctx->ctx;
+
+	mutex_lock(&ctx->mutex);
+	smp_call_function_single(cpu, __perf_counter_exit_cpu, NULL, 1);
+	mutex_unlock(&ctx->mutex);
+}
+#else
+static inline void perf_counter_exit_cpu(int cpu) { }
+#endif
+
+static int __cpuinit
+perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action) {
+
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+		perf_counter_init_cpu(cpu);
+		break;
+
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		perf_counter_exit_cpu(cpu);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+/*
+ * This has to have a higher priority than migration_notifier in sched.c.
+ */
+static struct notifier_block __cpuinitdata perf_cpu_nb = {
+	.notifier_call		= perf_cpu_notify,
+	.priority		= 20,
+};
+
+void __init perf_counter_init(void)
+{
+	perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_UP_PREPARE,
+			(void *)(long)smp_processor_id());
+	register_cpu_notifier(&perf_cpu_nb);
+}
+
+static ssize_t perf_show_reserve_percpu(struct sysdev_class *class, char *buf)
+{
+	return sprintf(buf, "%d\n", perf_reserved_percpu);
+}
+
+static ssize_t
+perf_set_reserve_percpu(struct sysdev_class *class,
+			const char *buf,
+			size_t count)
+{
+	struct perf_cpu_context *cpuctx;
+	unsigned long val;
+	int err, cpu, mpt;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val > perf_max_counters)
+		return -EINVAL;
+
+	spin_lock(&perf_resource_lock);
+	perf_reserved_percpu = val;
+	for_each_online_cpu(cpu) {
+		cpuctx = &per_cpu(perf_cpu_context, cpu);
+		spin_lock_irq(&cpuctx->ctx.lock);
+		mpt = min(perf_max_counters - cpuctx->ctx.nr_counters,
+			  perf_max_counters - perf_reserved_percpu);
+		cpuctx->max_pertask = mpt;
+		spin_unlock_irq(&cpuctx->ctx.lock);
+	}
+	spin_unlock(&perf_resource_lock);
+
+	return count;
+}
+
+static ssize_t perf_show_overcommit(struct sysdev_class *class, char *buf)
+{
+	return sprintf(buf, "%d\n", perf_overcommit);
+}
+
+static ssize_t
+perf_set_overcommit(struct sysdev_class *class, const char *buf, size_t count)
+{
+	unsigned long val;
+	int err;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val > 1)
+		return -EINVAL;
+
+	spin_lock(&perf_resource_lock);
+	perf_overcommit = val;
+	spin_unlock(&perf_resource_lock);
+
+	return count;
+}
+
+static SYSDEV_CLASS_ATTR(
+				reserve_percpu,
+				0644,
+				perf_show_reserve_percpu,
+				perf_set_reserve_percpu
+			);
+
+static SYSDEV_CLASS_ATTR(
+				overcommit,
+				0644,
+				perf_show_overcommit,
+				perf_set_overcommit
+			);
+
+static struct attribute *perfclass_attrs[] = {
+	&attr_reserve_percpu.attr,
+	&attr_overcommit.attr,
+	NULL
+};
+
+static struct attribute_group perfclass_attr_group = {
+	.attrs			= perfclass_attrs,
+	.name			= "perf_counters",
+};
+
+static int __init perf_counter_sysfs_init(void)
+{
+	return sysfs_create_group(&cpu_sysdev_class.kset.kobj,
+				  &perfclass_attr_group);
+}
+device_initcall(perf_counter_sysfs_init);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 23bd4daeb96..72067cbdb37 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -116,9 +116,13 @@ config SUSPEND_FREEZER
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
+config HIBERNATION_NVS
+	bool
+
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
+	select HIBERNATION_NVS if HAS_IOMEM
 	---help---
 	  Enable the suspend to disk (STD) functionality, which is usually
 	  called "hibernation" in user interfaces.  STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 720ea4f781b..c3b81c30e5d 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -6,6 +6,9 @@ endif
 obj-$(CONFIG_PM)		+= main.o
 obj-$(CONFIG_PM_SLEEP)		+= console.o
 obj-$(CONFIG_FREEZER)		+= process.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o disk.o snapshot.o swap.o user.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o
+obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o hibernate.o snapshot.o swap.o user.o
+obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/disk.c b/kernel/power/hibernate.c
index e71ca9cd81b..81d2e746489 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/hibernate.c
@@ -1,12 +1,12 @@
 /*
- * kernel/power/disk.c - Suspend-to-disk support.
+ * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
  *
  * Copyright (c) 2003 Patrick Mochel
  * Copyright (c) 2003 Open Source Development Lab
  * Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
  *
  * This file is released under the GPLv2.
- *
  */
 
 #include <linux/suspend.h>
@@ -215,19 +215,17 @@ static int create_image(int platform_mode)
 	if (error)
 		return error;
 
-	device_pm_lock();
-
-	/* At this point, device_suspend() has been called, but *not*
-	 * device_power_down(). We *must* call device_power_down() now.
+	/* At this point, dpm_suspend_start() has been called, but *not*
+	 * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
 	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
 	 * become desynchronized with the actual state of the hardware
 	 * at resume time, and evil weirdness ensues.
 	 */
-	error = device_power_down(PMSG_FREEZE);
+	error = dpm_suspend_noirq(PMSG_FREEZE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting hibernation\n");
-		goto Unlock;
+		return error;
 	}
 
 	error = platform_pre_snapshot(platform_mode);
@@ -241,9 +239,9 @@ static int create_image(int platform_mode)
 
 	local_irq_disable();
 
-	sysdev_suspend(PMSG_FREEZE);
+	error = sysdev_suspend(PMSG_FREEZE);
 	if (error) {
-		printk(KERN_ERR "PM: Some devices failed to power down, "
+		printk(KERN_ERR "PM: Some system devices failed to power down, "
 			"aborting hibernation\n");
 		goto Enable_irqs;
 	}
@@ -264,7 +262,7 @@ static int create_image(int platform_mode)
 
  Power_up:
 	sysdev_resume();
-	/* NOTE:  device_power_up() is just a resume() for devices
+	/* NOTE:  dpm_resume_noirq() is just a resume() for devices
 	 * that suspended with irqs off ... no overall powerup.
 	 */
 
@@ -277,12 +275,9 @@ static int create_image(int platform_mode)
  Platform_finish:
 	platform_finish(platform_mode);
 
-	device_power_up(in_suspend ?
+	dpm_resume_noirq(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 
- Unlock:
-	device_pm_unlock();
-
 	return error;
 }
 
@@ -309,7 +304,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
-	error = device_suspend(PMSG_FREEZE);
+	error = dpm_suspend_start(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
 
@@ -320,7 +315,7 @@ int hibernation_snapshot(int platform_mode)
 	/* Control returns here after successful restore */
 
  Resume_devices:
-	device_resume(in_suspend ?
+	dpm_resume_end(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 	resume_console();
  Close:
@@ -344,13 +339,11 @@ static int resume_target_kernel(bool platform_mode)
 {
 	int error;
 
-	device_pm_lock();
-
-	error = device_power_down(PMSG_QUIESCE);
+	error = dpm_suspend_noirq(PMSG_QUIESCE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting resume\n");
-		goto Unlock;
+		return error;
 	}
 
 	error = platform_pre_restore(platform_mode);
@@ -401,10 +394,7 @@ static int resume_target_kernel(bool platform_mode)
  Cleanup:
 	platform_restore_cleanup(platform_mode);
 
-	device_power_up(PMSG_RECOVER);
-
- Unlock:
-	device_pm_unlock();
+	dpm_resume_noirq(PMSG_RECOVER);
 
 	return error;
 }
@@ -424,10 +414,10 @@ int hibernation_restore(int platform_mode)
 
 	pm_prepare_console();
 	suspend_console();
-	error = device_suspend(PMSG_QUIESCE);
+	error = dpm_suspend_start(PMSG_QUIESCE);
 	if (!error) {
 		error = resume_target_kernel(platform_mode);
-		device_resume(PMSG_RECOVER);
+		dpm_resume_end(PMSG_RECOVER);
 	}
 	resume_console();
 	pm_restore_console();
@@ -457,18 +447,16 @@ int hibernation_platform_enter(void)
 
 	entering_platform_hibernation = true;
 	suspend_console();
-	error = device_suspend(PMSG_HIBERNATE);
+	error = dpm_suspend_start(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
 			hibernation_ops->recover();
 		goto Resume_devices;
 	}
 
-	device_pm_lock();
-
-	error = device_power_down(PMSG_HIBERNATE);
+	error = dpm_suspend_noirq(PMSG_HIBERNATE);
 	if (error)
-		goto Unlock;
+		goto Resume_devices;
 
 	error = hibernation_ops->prepare();
 	if (error)
@@ -491,14 +479,11 @@ int hibernation_platform_enter(void)
  Platofrm_finish:
 	hibernation_ops->finish();
 
-	device_power_up(PMSG_RESTORE);
-
- Unlock:
-	device_pm_unlock();
+	dpm_suspend_noirq(PMSG_RESTORE);
 
  Resume_devices:
 	entering_platform_hibernation = false;
-	device_resume(PMSG_RESTORE);
+	dpm_resume_end(PMSG_RESTORE);
 	resume_console();
 
  Close:
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/hibernate_nvs.c
new file mode 100644
index 00000000000..39ac698ef83
--- /dev/null
+++ b/kernel/power/hibernate_nvs.c
@@ -0,0 +1,135 @@
+/*
+ * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory
+ *
+ * Copyright (C) 2008,2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/suspend.h>
+
+/*
+ * Platforms, like ACPI, may want us to save some memory used by them during
+ * hibernation and to restore the contents of this memory during the subsequent
+ * resume.  The code below implements a mechanism allowing us to do that.
+ */
+
+struct nvs_page {
+	unsigned long phys_start;
+	unsigned int size;
+	void *kaddr;
+	void *data;
+	struct list_head node;
+};
+
+static LIST_HEAD(nvs_list);
+
+/**
+ *	hibernate_nvs_register - register platform NVS memory region to save
+ *	@start - physical address of the region
+ *	@size - size of the region
+ *
+ *	The NVS region need not be page-aligned (both ends) and we arrange
+ *	things so that the data from page-aligned addresses in this region will
+ *	be copied into separate RAM pages.
+ */
+int hibernate_nvs_register(unsigned long start, unsigned long size)
+{
+	struct nvs_page *entry, *next;
+
+	while (size > 0) {
+		unsigned int nr_bytes;
+
+		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
+		if (!entry)
+			goto Error;
+
+		list_add_tail(&entry->node, &nvs_list);
+		entry->phys_start = start;
+		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
+		entry->size = (size < nr_bytes) ? size : nr_bytes;
+
+		start += entry->size;
+		size -= entry->size;
+	}
+	return 0;
+
+ Error:
+	list_for_each_entry_safe(entry, next, &nvs_list, node) {
+		list_del(&entry->node);
+		kfree(entry);
+	}
+	return -ENOMEM;
+}
+
+/**
+ *	hibernate_nvs_free - free data pages allocated for saving NVS regions
+ */
+void hibernate_nvs_free(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			free_page((unsigned long)entry->data);
+			entry->data = NULL;
+			if (entry->kaddr) {
+				iounmap(entry->kaddr);
+				entry->kaddr = NULL;
+			}
+		}
+}
+
+/**
+ *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ */
+int hibernate_nvs_alloc(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node) {
+		entry->data = (void *)__get_free_page(GFP_KERNEL);
+		if (!entry->data) {
+			hibernate_nvs_free();
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	hibernate_nvs_save - save NVS memory regions
+ */
+void hibernate_nvs_save(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Saving platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			entry->kaddr = ioremap(entry->phys_start, entry->size);
+			memcpy(entry->data, entry->kaddr, entry->size);
+		}
+}
+
+/**
+ *	hibernate_nvs_restore - restore NVS memory regions
+ *
+ *	This function is going to be called with interrupts disabled, so it
+ *	cannot iounmap the virtual addresses used to access the NVS region.
+ */
+void hibernate_nvs_restore(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data)
+			memcpy(entry->kaddr, entry->data, entry->size);
+}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index f99ed6a75ea..f710e36930c 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -8,20 +8,9 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/suspend.h>
 #include <linux/kobject.h>
 #include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/cpu.h>
 #include <linux/resume-trace.h>
-#include <linux/freezer.h>
-#include <linux/vmstat.h>
-#include <linux/syscalls.h>
 
 #include "power.h"
 
@@ -119,378 +108,6 @@ power_attr(pm_test);
 
 #endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_SUSPEND
-
-static int suspend_test(int level)
-{
-#ifdef CONFIG_PM_DEBUG
-	if (pm_test_level == level) {
-		printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
-		mdelay(5000);
-		return 1;
-	}
-#endif /* !CONFIG_PM_DEBUG */
-	return 0;
-}
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-/*
- * We test the system suspend code by setting an RTC wakealarm a short
- * time in the future, then suspending.  Suspending the devices won't
- * normally take long ... some systems only need a few milliseconds.
- *
- * The time it takes is system-specific though, so when we test this
- * during system bootup we allow a LOT of time.
- */
-#define TEST_SUSPEND_SECONDS	5
-
-static unsigned long suspend_test_start_time;
-
-static void suspend_test_start(void)
-{
-	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
-	 * What we want is a hardware counter that will work correctly even
-	 * during the irqs-are-off stages of the suspend/resume cycle...
-	 */
-	suspend_test_start_time = jiffies;
-}
-
-static void suspend_test_finish(const char *label)
-{
-	long nj = jiffies - suspend_test_start_time;
-	unsigned msec;
-
-	msec = jiffies_to_msecs(abs(nj));
-	pr_info("PM: %s took %d.%03d seconds\n", label,
-			msec / 1000, msec % 1000);
-
-	/* Warning on suspend means the RTC alarm period needs to be
-	 * larger -- the system was sooo slooowwww to suspend that the
-	 * alarm (should have) fired before the system went to sleep!
-	 *
-	 * Warning on either suspend or resume also means the system
-	 * has some performance issues.  The stack dump of a WARN_ON
-	 * is more likely to get the right attention than a printk...
-	 */
-	WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
-}
-
-#else
-
-static void suspend_test_start(void)
-{
-}
-
-static void suspend_test_finish(const char *label)
-{
-}
-
-#endif
-
-/* This is just an arbitrary number */
-#define FREE_PAGE_NUMBER (100)
-
-static struct platform_suspend_ops *suspend_ops;
-
-/**
- *	suspend_set_ops - Set the global suspend method table.
- *	@ops:	Pointer to ops structure.
- */
-
-void suspend_set_ops(struct platform_suspend_ops *ops)
-{
-	mutex_lock(&pm_mutex);
-	suspend_ops = ops;
-	mutex_unlock(&pm_mutex);
-}
-
-/**
- * suspend_valid_only_mem - generic memory-only valid callback
- *
- * Platform drivers that implement mem suspend only and only need
- * to check for that in their .valid callback can use this instead
- * of rolling their own .valid callback.
- */
-int suspend_valid_only_mem(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM;
-}
-
-/**
- *	suspend_prepare - Do prep work before entering low-power state.
- *
- *	This is common code that is called for each state that we're entering.
- *	Run suspend notifiers, allocate a console and stop all processes.
- */
-static int suspend_prepare(void)
-{
-	int error;
-	unsigned int free_pages;
-
-	if (!suspend_ops || !suspend_ops->enter)
-		return -EPERM;
-
-	pm_prepare_console();
-
-	error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
-	if (error)
-		goto Finish;
-
-	error = usermodehelper_disable();
-	if (error)
-		goto Finish;
-
-	if (suspend_freeze_processes()) {
-		error = -EAGAIN;
-		goto Thaw;
-	}
-
-	free_pages = global_page_state(NR_FREE_PAGES);
-	if (free_pages < FREE_PAGE_NUMBER) {
-		pr_debug("PM: free some memory\n");
-		shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
-		if (nr_free_pages() < FREE_PAGE_NUMBER) {
-			error = -ENOMEM;
-			printk(KERN_ERR "PM: No enough memory\n");
-		}
-	}
-	if (!error)
-		return 0;
-
- Thaw:
-	suspend_thaw_processes();
-	usermodehelper_enable();
- Finish:
-	pm_notifier_call_chain(PM_POST_SUSPEND);
-	pm_restore_console();
-	return error;
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
-{
-	local_irq_disable();
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
-{
-	local_irq_enable();
-}
-
-/**
- *	suspend_enter - enter the desired system sleep state.
- *	@state:		state to enter
- *
- *	This function should be called after devices have been suspended.
- */
-static int suspend_enter(suspend_state_t state)
-{
-	int error;
-
-	device_pm_lock();
-
-	if (suspend_ops->prepare) {
-		error = suspend_ops->prepare();
-		if (error)
-			goto Done;
-	}
-
-	error = device_power_down(PMSG_SUSPEND);
-	if (error) {
-		printk(KERN_ERR "PM: Some devices failed to power down\n");
-		goto Platfrom_finish;
-	}
-
-	if (suspend_ops->prepare_late) {
-		error = suspend_ops->prepare_late();
-		if (error)
-			goto Power_up_devices;
-	}
-
-	if (suspend_test(TEST_PLATFORM))
-		goto Platform_wake;
-
-	error = disable_nonboot_cpus();
-	if (error || suspend_test(TEST_CPUS))
-		goto Enable_cpus;
-
-	arch_suspend_disable_irqs();
-	BUG_ON(!irqs_disabled());
-
-	error = sysdev_suspend(PMSG_SUSPEND);
-	if (!error) {
-		if (!suspend_test(TEST_CORE))
-			error = suspend_ops->enter(state);
-		sysdev_resume();
-	}
-
-	arch_suspend_enable_irqs();
-	BUG_ON(irqs_disabled());
-
- Enable_cpus:
-	enable_nonboot_cpus();
-
- Platform_wake:
-	if (suspend_ops->wake)
-		suspend_ops->wake();
-
- Power_up_devices:
-	device_power_up(PMSG_RESUME);
-
- Platfrom_finish:
-	if (suspend_ops->finish)
-		suspend_ops->finish();
-
- Done:
-	device_pm_unlock();
-
-	return error;
-}
-
-/**
- *	suspend_devices_and_enter - suspend devices and enter the desired system
- *				    sleep state.
- *	@state:		  state to enter
- */
-int suspend_devices_and_enter(suspend_state_t state)
-{
-	int error;
-
-	if (!suspend_ops)
-		return -ENOSYS;
-
-	if (suspend_ops->begin) {
-		error = suspend_ops->begin(state);
-		if (error)
-			goto Close;
-	}
-	suspend_console();
-	suspend_test_start();
-	error = device_suspend(PMSG_SUSPEND);
-	if (error) {
-		printk(KERN_ERR "PM: Some devices failed to suspend\n");
-		goto Recover_platform;
-	}
-	suspend_test_finish("suspend devices");
-	if (suspend_test(TEST_DEVICES))
-		goto Recover_platform;
-
-	suspend_enter(state);
-
- Resume_devices:
-	suspend_test_start();
-	device_resume(PMSG_RESUME);
-	suspend_test_finish("resume devices");
-	resume_console();
- Close:
-	if (suspend_ops->end)
-		suspend_ops->end();
-	return error;
-
- Recover_platform:
-	if (suspend_ops->recover)
-		suspend_ops->recover();
-	goto Resume_devices;
-}
-
-/**
- *	suspend_finish - Do final work before exiting suspend sequence.
- *
- *	Call platform code to clean up, restart processes, and free the 
- *	console that we've allocated. This is not called for suspend-to-disk.
- */
-static void suspend_finish(void)
-{
-	suspend_thaw_processes();
-	usermodehelper_enable();
-	pm_notifier_call_chain(PM_POST_SUSPEND);
-	pm_restore_console();
-}
-
-
-
-
-static const char * const pm_states[PM_SUSPEND_MAX] = {
-	[PM_SUSPEND_STANDBY]	= "standby",
-	[PM_SUSPEND_MEM]	= "mem",
-};
-
-static inline int valid_state(suspend_state_t state)
-{
-	/* All states need lowlevel support and need to be valid
-	 * to the lowlevel implementation, no valid callback
-	 * implies that none are valid. */
-	if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state))
-		return 0;
-	return 1;
-}
-
-
-/**
- *	enter_state - Do common work of entering low-power state.
- *	@state:		pm_state structure for state we're entering.
- *
- *	Make sure we're the only ones trying to enter a sleep state. Fail
- *	if someone has beat us to it, since we don't want anything weird to
- *	happen when we wake up.
- *	Then, do the setup for suspend, enter the state, and cleaup (after
- *	we've woken up).
- */
-static int enter_state(suspend_state_t state)
-{
-	int error;
-
-	if (!valid_state(state))
-		return -ENODEV;
-
-	if (!mutex_trylock(&pm_mutex))
-		return -EBUSY;
-
-	printk(KERN_INFO "PM: Syncing filesystems ... ");
-	sys_sync();
-	printk("done.\n");
-
-	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
-	error = suspend_prepare();
-	if (error)
-		goto Unlock;
-
-	if (suspend_test(TEST_FREEZER))
-		goto Finish;
-
-	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
-	error = suspend_devices_and_enter(state);
-
- Finish:
-	pr_debug("PM: Finishing wakeup.\n");
-	suspend_finish();
- Unlock:
-	mutex_unlock(&pm_mutex);
-	return error;
-}
-
-
-/**
- *	pm_suspend - Externally visible function for suspending system.
- *	@state:		Enumerated value of state to enter.
- *
- *	Determine whether or not value is within range, get state 
- *	structure, and enter (above).
- */
-
-int pm_suspend(suspend_state_t state)
-{
-	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
-		return enter_state(state);
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(pm_suspend);
-
-#endif /* CONFIG_SUSPEND */
-
 struct kobject *power_kobj;
 
 /**
@@ -503,7 +120,6 @@ struct kobject *power_kobj;
  *	store() accepts one of those strings, translates it into the 
  *	proper enumerated value, and initiates a suspend transition.
  */
-
 static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr,
 			  char *buf)
 {
@@ -601,7 +217,6 @@ static struct attribute_group attr_group = {
 	.attrs = g,
 };
 
-
 static int __init pm_init(void)
 {
 	power_kobj = kobject_create_and_add("power", NULL);
@@ -611,144 +226,3 @@ static int __init pm_init(void)
 }
 
 core_initcall(pm_init);
-
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-#include <linux/rtc.h>
-
-/*
- * To test system suspend, we need a hands-off mechanism to resume the
- * system.  RTCs wake alarms are a common self-contained mechanism.
- */
-
-static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
-{
-	static char err_readtime[] __initdata =
-		KERN_ERR "PM: can't read %s time, err %d\n";
-	static char err_wakealarm [] __initdata =
-		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
-	static char err_suspend[] __initdata =
-		KERN_ERR "PM: suspend test failed, error %d\n";
-	static char info_test[] __initdata =
-		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
-
-	unsigned long		now;
-	struct rtc_wkalrm	alm;
-	int			status;
-
-	/* this may fail if the RTC hasn't been initialized */
-	status = rtc_read_time(rtc, &alm.time);
-	if (status < 0) {
-		printk(err_readtime, dev_name(&rtc->dev), status);
-		return;
-	}
-	rtc_tm_to_time(&alm.time, &now);
-
-	memset(&alm, 0, sizeof alm);
-	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
-	alm.enabled = true;
-
-	status = rtc_set_alarm(rtc, &alm);
-	if (status < 0) {
-		printk(err_wakealarm, dev_name(&rtc->dev), status);
-		return;
-	}
-
-	if (state == PM_SUSPEND_MEM) {
-		printk(info_test, pm_states[state]);
-		status = pm_suspend(state);
-		if (status == -ENODEV)
-			state = PM_SUSPEND_STANDBY;
-	}
-	if (state == PM_SUSPEND_STANDBY) {
-		printk(info_test, pm_states[state]);
-		status = pm_suspend(state);
-	}
-	if (status < 0)
-		printk(err_suspend, status);
-
-	/* Some platforms can't detect that the alarm triggered the
-	 * wakeup, or (accordingly) disable it after it afterwards.
-	 * It's supposed to give oneshot behavior; cope.
-	 */
-	alm.enabled = false;
-	rtc_set_alarm(rtc, &alm);
-}
-
-static int __init has_wakealarm(struct device *dev, void *name_ptr)
-{
-	struct rtc_device *candidate = to_rtc_device(dev);
-
-	if (!candidate->ops->set_alarm)
-		return 0;
-	if (!device_may_wakeup(candidate->dev.parent))
-		return 0;
-
-	*(const char **)name_ptr = dev_name(dev);
-	return 1;
-}
-
-/*
- * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
- * at startup time.  They're normally disabled, for faster boot and because
- * we can't know which states really work on this particular system.
- */
-static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
-
-static char warn_bad_state[] __initdata =
-	KERN_WARNING "PM: can't test '%s' suspend state\n";
-
-static int __init setup_test_suspend(char *value)
-{
-	unsigned i;
-
-	/* "=mem" ==> "mem" */
-	value++;
-	for (i = 0; i < PM_SUSPEND_MAX; i++) {
-		if (!pm_states[i])
-			continue;
-		if (strcmp(pm_states[i], value) != 0)
-			continue;
-		test_state = (__force suspend_state_t) i;
-		return 0;
-	}
-	printk(warn_bad_state, value);
-	return 0;
-}
-__setup("test_suspend", setup_test_suspend);
-
-static int __init test_suspend(void)
-{
-	static char		warn_no_rtc[] __initdata =
-		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
-
-	char			*pony = NULL;
-	struct rtc_device	*rtc = NULL;
-
-	/* PM is initialized by now; is that state testable? */
-	if (test_state == PM_SUSPEND_ON)
-		goto done;
-	if (!valid_state(test_state)) {
-		printk(warn_bad_state, pm_states[test_state]);
-		goto done;
-	}
-
-	/* RTCs have initialized by now too ... can we use one? */
-	class_find_device(rtc_class, NULL, &pony, has_wakealarm);
-	if (pony)
-		rtc = rtc_class_open(pony);
-	if (!rtc) {
-		printk(warn_no_rtc);
-		goto done;
-	}
-
-	/* go for it */
-	test_wakealarm(rtc, test_state);
-	rtc_class_close(rtc);
-done:
-	return 0;
-}
-late_initcall(test_suspend);
-
-#endif /* CONFIG_PM_TEST_SUSPEND */
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 46b5ec7a3af..26d5a26f82e 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -45,7 +45,7 @@ static inline char *check_image_kernel(struct swsusp_info *info)
  */
 #define SPARE_PAGES	((1024 * 1024) >> PAGE_SHIFT)
 
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
 extern int hibernation_snapshot(int platform_mode);
 extern int hibernation_restore(int platform_mode);
 extern int hibernation_platform_enter(void);
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resume(void);
 
 extern int create_basic_memory_bitmaps(void);
 extern void free_basic_memory_bitmaps(void);
-extern unsigned int count_data_pages(void);
+extern int swsusp_shrink_memory(void);
 
 /**
  *	Auxiliary structure used for reading the snapshot image data and
@@ -147,9 +147,8 @@ extern int swsusp_swap_in_use(void);
  */
 #define SF_PLATFORM_MODE	1
 
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
 extern int swsusp_check(void);
-extern int swsusp_shrink_memory(void);
 extern void swsusp_free(void);
 extern int swsusp_read(unsigned int *flags_p);
 extern int swsusp_write(unsigned int flags);
@@ -161,22 +160,36 @@ extern void swsusp_show_speed(struct timeval *, struct timeval *,
 				unsigned int, char *);
 
 #ifdef CONFIG_SUSPEND
-/* kernel/power/main.c */
+/* kernel/power/suspend.c */
+extern const char *const pm_states[];
+
+extern bool valid_state(suspend_state_t state);
 extern int suspend_devices_and_enter(suspend_state_t state);
+extern int enter_state(suspend_state_t state);
 #else /* !CONFIG_SUSPEND */
 static inline int suspend_devices_and_enter(suspend_state_t state)
 {
 	return -ENOSYS;
 }
+static inline int enter_state(suspend_state_t state) { return -ENOSYS; }
+static inline bool valid_state(suspend_state_t state) { return false; }
 #endif /* !CONFIG_SUSPEND */
 
+#ifdef CONFIG_PM_TEST_SUSPEND
+/* kernel/power/suspend_test.c */
+extern void suspend_test_start(void);
+extern void suspend_test_finish(const char *label);
+#else /* !CONFIG_PM_TEST_SUSPEND */
+static inline void suspend_test_start(void) {}
+static inline void suspend_test_finish(const char *label) {}
+#endif /* !CONFIG_PM_TEST_SUSPEND */
+
 #ifdef CONFIG_PM_SLEEP
 /* kernel/power/main.c */
 extern int pm_notifier_call_chain(unsigned long val);
 #endif
 
 #ifdef CONFIG_HIGHMEM
-unsigned int count_highmem_pages(void);
 int restore_highmem(void);
 #else
 static inline unsigned int count_highmem_pages(void) { return 0; }
diff --git a/kernel/power/poweroff.c b/kernel/power/poweroff.c
index 97890831e1b..e8b33700627 100644
--- a/kernel/power/poweroff.c
+++ b/kernel/power/poweroff.c
@@ -34,7 +34,7 @@ static struct sysrq_key_op	sysrq_poweroff_op = {
 	.handler        = handle_poweroff,
 	.help_msg       = "powerOff",
 	.action_msg     = "Power Off",
- 	.enable_mask	= SYSRQ_ENABLE_BOOT,
+	.enable_mask	= SYSRQ_ENABLE_BOOT,
 };
 
 static int pm_sysrq_init(void)
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 33e2e4a819f..523a451b45d 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -39,6 +39,14 @@ static int swsusp_page_is_free(struct page *);
 static void swsusp_set_page_forbidden(struct page *);
 static void swsusp_unset_page_forbidden(struct page *);
 
+/*
+ * Preferred image size in bytes (tunable via /sys/power/image_size).
+ * When it is set to N, swsusp will do its best to ensure the image
+ * size will not exceed N bytes, but if that is impossible, it will
+ * try to create the smallest image possible.
+ */
+unsigned long image_size = 500 * 1024 * 1024;
+
 /* List of PBEs needed for restoring the pages that were allocated before
  * the suspend and included in the suspend image, but have also been
  * allocated by the "resume" kernel, so their contents cannot be written
@@ -840,7 +848,7 @@ static struct page *saveable_highmem_page(struct zone *zone, unsigned long pfn)
  *	pages.
  */
 
-unsigned int count_highmem_pages(void)
+static unsigned int count_highmem_pages(void)
 {
 	struct zone *zone;
 	unsigned int n = 0;
@@ -902,7 +910,7 @@ static struct page *saveable_page(struct zone *zone, unsigned long pfn)
  *	pages.
  */
 
-unsigned int count_data_pages(void)
+static unsigned int count_data_pages(void)
 {
 	struct zone *zone;
 	unsigned long pfn, max_zone_pfn;
@@ -1058,6 +1066,74 @@ void swsusp_free(void)
 	buffer = NULL;
 }
 
+/**
+ *	swsusp_shrink_memory -  Try to free as much memory as needed
+ *
+ *	... but do not OOM-kill anyone
+ *
+ *	Notice: all userland should be stopped before it is called, or
+ *	livelock is possible.
+ */
+
+#define SHRINK_BITE	10000
+static inline unsigned long __shrink_memory(long tmp)
+{
+	if (tmp > SHRINK_BITE)
+		tmp = SHRINK_BITE;
+	return shrink_all_memory(tmp);
+}
+
+int swsusp_shrink_memory(void)
+{
+	long tmp;
+	struct zone *zone;
+	unsigned long pages = 0;
+	unsigned int i = 0;
+	char *p = "-\\|/";
+	struct timeval start, stop;
+
+	printk(KERN_INFO "PM: Shrinking memory...  ");
+	do_gettimeofday(&start);
+	do {
+		long size, highmem_size;
+
+		highmem_size = count_highmem_pages();
+		size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
+		tmp = size;
+		size += highmem_size;
+		for_each_populated_zone(zone) {
+			tmp += snapshot_additional_pages(zone);
+			if (is_highmem(zone)) {
+				highmem_size -=
+					zone_page_state(zone, NR_FREE_PAGES);
+			} else {
+				tmp -= zone_page_state(zone, NR_FREE_PAGES);
+				tmp += zone->lowmem_reserve[ZONE_NORMAL];
+			}
+		}
+
+		if (highmem_size < 0)
+			highmem_size = 0;
+
+		tmp += highmem_size;
+		if (tmp > 0) {
+			tmp = __shrink_memory(tmp);
+			if (!tmp)
+				return -ENOMEM;
+			pages += tmp;
+		} else if (size > image_size / PAGE_SIZE) {
+			tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
+			pages += tmp;
+		}
+		printk("\b%c", p[i++%4]);
+	} while (tmp > 0);
+	do_gettimeofday(&stop);
+	printk("\bdone (%lu pages freed)\n", pages);
+	swsusp_show_speed(&start, &stop, pages, "Freed");
+
+	return 0;
+}
+
 #ifdef CONFIG_HIGHMEM
 /**
   *	count_pages_for_highmem - compute the number of non-highmem pages
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
new file mode 100644
index 00000000000..6f10dfc2d3e
--- /dev/null
+++ b/kernel/power/suspend.c
@@ -0,0 +1,300 @@
+/*
+ * kernel/power/suspend.c - Suspend to RAM and standby functionality.
+ *
+ * Copyright (c) 2003 Patrick Mochel
+ * Copyright (c) 2003 Open Source Development Lab
+ * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/cpu.h>
+#include <linux/syscalls.h>
+
+#include "power.h"
+
+const char *const pm_states[PM_SUSPEND_MAX] = {
+	[PM_SUSPEND_STANDBY]	= "standby",
+	[PM_SUSPEND_MEM]	= "mem",
+};
+
+static struct platform_suspend_ops *suspend_ops;
+
+/**
+ *	suspend_set_ops - Set the global suspend method table.
+ *	@ops:	Pointer to ops structure.
+ */
+void suspend_set_ops(struct platform_suspend_ops *ops)
+{
+	mutex_lock(&pm_mutex);
+	suspend_ops = ops;
+	mutex_unlock(&pm_mutex);
+}
+
+bool valid_state(suspend_state_t state)
+{
+	/*
+	 * All states need lowlevel support and need to be valid to the lowlevel
+	 * implementation, no valid callback implies that none are valid.
+	 */
+	return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
+}
+
+/**
+ * suspend_valid_only_mem - generic memory-only valid callback
+ *
+ * Platform drivers that implement mem suspend only and only need
+ * to check for that in their .valid callback can use this instead
+ * of rolling their own .valid callback.
+ */
+int suspend_valid_only_mem(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+static int suspend_test(int level)
+{
+#ifdef CONFIG_PM_DEBUG
+	if (pm_test_level == level) {
+		printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
+		mdelay(5000);
+		return 1;
+	}
+#endif /* !CONFIG_PM_DEBUG */
+	return 0;
+}
+
+/**
+ *	suspend_prepare - Do prep work before entering low-power state.
+ *
+ *	This is common code that is called for each state that we're entering.
+ *	Run suspend notifiers, allocate a console and stop all processes.
+ */
+static int suspend_prepare(void)
+{
+	int error;
+
+	if (!suspend_ops || !suspend_ops->enter)
+		return -EPERM;
+
+	pm_prepare_console();
+
+	error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
+	if (error)
+		goto Finish;
+
+	error = usermodehelper_disable();
+	if (error)
+		goto Finish;
+
+	error = suspend_freeze_processes();
+	if (!error)
+		return 0;
+
+	suspend_thaw_processes();
+	usermodehelper_enable();
+ Finish:
+	pm_notifier_call_chain(PM_POST_SUSPEND);
+	pm_restore_console();
+	return error;
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
+{
+	local_irq_disable();
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
+{
+	local_irq_enable();
+}
+
+/**
+ *	suspend_enter - enter the desired system sleep state.
+ *	@state:		state to enter
+ *
+ *	This function should be called after devices have been suspended.
+ */
+static int suspend_enter(suspend_state_t state)
+{
+	int error;
+
+	if (suspend_ops->prepare) {
+		error = suspend_ops->prepare();
+		if (error)
+			return error;
+	}
+
+	error = dpm_suspend_noirq(PMSG_SUSPEND);
+	if (error) {
+		printk(KERN_ERR "PM: Some devices failed to power down\n");
+		goto Platfrom_finish;
+	}
+
+	if (suspend_ops->prepare_late) {
+		error = suspend_ops->prepare_late();
+		if (error)
+			goto Power_up_devices;
+	}
+
+	if (suspend_test(TEST_PLATFORM))
+		goto Platform_wake;
+
+	error = disable_nonboot_cpus();
+	if (error || suspend_test(TEST_CPUS))
+		goto Enable_cpus;
+
+	arch_suspend_disable_irqs();
+	BUG_ON(!irqs_disabled());
+
+	error = sysdev_suspend(PMSG_SUSPEND);
+	if (!error) {
+		if (!suspend_test(TEST_CORE))
+			error = suspend_ops->enter(state);
+		sysdev_resume();
+	}
+
+	arch_suspend_enable_irqs();
+	BUG_ON(irqs_disabled());
+
+ Enable_cpus:
+	enable_nonboot_cpus();
+
+ Platform_wake:
+	if (suspend_ops->wake)
+		suspend_ops->wake();
+
+ Power_up_devices:
+	dpm_resume_noirq(PMSG_RESUME);
+
+ Platfrom_finish:
+	if (suspend_ops->finish)
+		suspend_ops->finish();
+
+	return error;
+}
+
+/**
+ *	suspend_devices_and_enter - suspend devices and enter the desired system
+ *				    sleep state.
+ *	@state:		  state to enter
+ */
+int suspend_devices_and_enter(suspend_state_t state)
+{
+	int error;
+
+	if (!suspend_ops)
+		return -ENOSYS;
+
+	if (suspend_ops->begin) {
+		error = suspend_ops->begin(state);
+		if (error)
+			goto Close;
+	}
+	suspend_console();
+	suspend_test_start();
+	error = dpm_suspend_start(PMSG_SUSPEND);
+	if (error) {
+		printk(KERN_ERR "PM: Some devices failed to suspend\n");
+		goto Recover_platform;
+	}
+	suspend_test_finish("suspend devices");
+	if (suspend_test(TEST_DEVICES))
+		goto Recover_platform;
+
+	suspend_enter(state);
+
+ Resume_devices:
+	suspend_test_start();
+	dpm_resume_end(PMSG_RESUME);
+	suspend_test_finish("resume devices");
+	resume_console();
+ Close:
+	if (suspend_ops->end)
+		suspend_ops->end();
+	return error;
+
+ Recover_platform:
+	if (suspend_ops->recover)
+		suspend_ops->recover();
+	goto Resume_devices;
+}
+
+/**
+ *	suspend_finish - Do final work before exiting suspend sequence.
+ *
+ *	Call platform code to clean up, restart processes, and free the
+ *	console that we've allocated. This is not called for suspend-to-disk.
+ */
+static void suspend_finish(void)
+{
+	suspend_thaw_processes();
+	usermodehelper_enable();
+	pm_notifier_call_chain(PM_POST_SUSPEND);
+	pm_restore_console();
+}
+
+/**
+ *	enter_state - Do common work of entering low-power state.
+ *	@state:		pm_state structure for state we're entering.
+ *
+ *	Make sure we're the only ones trying to enter a sleep state. Fail
+ *	if someone has beat us to it, since we don't want anything weird to
+ *	happen when we wake up.
+ *	Then, do the setup for suspend, enter the state, and cleaup (after
+ *	we've woken up).
+ */
+int enter_state(suspend_state_t state)
+{
+	int error;
+
+	if (!valid_state(state))
+		return -ENODEV;
+
+	if (!mutex_trylock(&pm_mutex))
+		return -EBUSY;
+
+	printk(KERN_INFO "PM: Syncing filesystems ... ");
+	sys_sync();
+	printk("done.\n");
+
+	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
+	error = suspend_prepare();
+	if (error)
+		goto Unlock;
+
+	if (suspend_test(TEST_FREEZER))
+		goto Finish;
+
+	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+	error = suspend_devices_and_enter(state);
+
+ Finish:
+	pr_debug("PM: Finishing wakeup.\n");
+	suspend_finish();
+ Unlock:
+	mutex_unlock(&pm_mutex);
+	return error;
+}
+
+/**
+ *	pm_suspend - Externally visible function for suspending system.
+ *	@state:		Enumerated value of state to enter.
+ *
+ *	Determine whether or not value is within range, get state
+ *	structure, and enter (above).
+ */
+int pm_suspend(suspend_state_t state)
+{
+	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
+		return enter_state(state);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(pm_suspend);
diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c
new file mode 100644
index 00000000000..17d8bb1acf9
--- /dev/null
+++ b/kernel/power/suspend_test.c
@@ -0,0 +1,187 @@
+/*
+ * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
+ *
+ * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/rtc.h>
+
+#include "power.h"
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending.  Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS	5
+
+static unsigned long suspend_test_start_time;
+
+void suspend_test_start(void)
+{
+	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
+	 * What we want is a hardware counter that will work correctly even
+	 * during the irqs-are-off stages of the suspend/resume cycle...
+	 */
+	suspend_test_start_time = jiffies;
+}
+
+void suspend_test_finish(const char *label)
+{
+	long nj = jiffies - suspend_test_start_time;
+	unsigned msec;
+
+	msec = jiffies_to_msecs(abs(nj));
+	pr_info("PM: %s took %d.%03d seconds\n", label,
+			msec / 1000, msec % 1000);
+
+	/* Warning on suspend means the RTC alarm period needs to be
+	 * larger -- the system was sooo slooowwww to suspend that the
+	 * alarm (should have) fired before the system went to sleep!
+	 *
+	 * Warning on either suspend or resume also means the system
+	 * has some performance issues.  The stack dump of a WARN_ON
+	 * is more likely to get the right attention than a printk...
+	 */
+	WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
+}
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system.  RTCs wake alarms are a common self-contained mechanism.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+	static char err_readtime[] __initdata =
+		KERN_ERR "PM: can't read %s time, err %d\n";
+	static char err_wakealarm [] __initdata =
+		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+	static char err_suspend[] __initdata =
+		KERN_ERR "PM: suspend test failed, error %d\n";
+	static char info_test[] __initdata =
+		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+	unsigned long		now;
+	struct rtc_wkalrm	alm;
+	int			status;
+
+	/* this may fail if the RTC hasn't been initialized */
+	status = rtc_read_time(rtc, &alm.time);
+	if (status < 0) {
+		printk(err_readtime, dev_name(&rtc->dev), status);
+		return;
+	}
+	rtc_tm_to_time(&alm.time, &now);
+
+	memset(&alm, 0, sizeof alm);
+	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+	alm.enabled = true;
+
+	status = rtc_set_alarm(rtc, &alm);
+	if (status < 0) {
+		printk(err_wakealarm, dev_name(&rtc->dev), status);
+		return;
+	}
+
+	if (state == PM_SUSPEND_MEM) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+		if (status == -ENODEV)
+			state = PM_SUSPEND_STANDBY;
+	}
+	if (state == PM_SUSPEND_STANDBY) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+	}
+	if (status < 0)
+		printk(err_suspend, status);
+
+	/* Some platforms can't detect that the alarm triggered the
+	 * wakeup, or (accordingly) disable it after it afterwards.
+	 * It's supposed to give oneshot behavior; cope.
+	 */
+	alm.enabled = false;
+	rtc_set_alarm(rtc, &alm);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+	struct rtc_device *candidate = to_rtc_device(dev);
+
+	if (!candidate->ops->set_alarm)
+		return 0;
+	if (!device_may_wakeup(candidate->dev.parent))
+		return 0;
+
+	*(const char **)name_ptr = dev_name(dev);
+	return 1;
+}
+
+/*
+ * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
+ * at startup time.  They're normally disabled, for faster boot and because
+ * we can't know which states really work on this particular system.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
+
+static char warn_bad_state[] __initdata =
+	KERN_WARNING "PM: can't test '%s' suspend state\n";
+
+static int __init setup_test_suspend(char *value)
+{
+	unsigned i;
+
+	/* "=mem" ==> "mem" */
+	value++;
+	for (i = 0; i < PM_SUSPEND_MAX; i++) {
+		if (!pm_states[i])
+			continue;
+		if (strcmp(pm_states[i], value) != 0)
+			continue;
+		test_state = (__force suspend_state_t) i;
+		return 0;
+	}
+	printk(warn_bad_state, value);
+	return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+	static char		warn_no_rtc[] __initdata =
+		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+	char			*pony = NULL;
+	struct rtc_device	*rtc = NULL;
+
+	/* PM is initialized by now; is that state testable? */
+	if (test_state == PM_SUSPEND_ON)
+		goto done;
+	if (!valid_state(test_state)) {
+		printk(warn_bad_state, pm_states[test_state]);
+		goto done;
+	}
+
+	/* RTCs have initialized by now too ... can we use one? */
+	class_find_device(rtc_class, NULL, &pony, has_wakealarm);
+	if (pony)
+		rtc = rtc_class_open(pony);
+	if (!rtc) {
+		printk(warn_no_rtc);
+		goto done;
+	}
+
+	/* go for it */
+	test_wakealarm(rtc, test_state);
+	rtc_class_close(rtc);
+done:
+	return 0;
+}
+late_initcall(test_suspend);
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 78c35047586..6a07f4dbf2f 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -55,14 +55,6 @@
 
 #include "power.h"
 
-/*
- * Preferred image size in bytes (tunable via /sys/power/image_size).
- * When it is set to N, swsusp will do its best to ensure the image
- * size will not exceed N bytes, but if that is impossible, it will
- * try to create the smallest image possible.
- */
-unsigned long image_size = 500 * 1024 * 1024;
-
 int in_suspend __nosavedata = 0;
 
 /**
@@ -194,193 +186,3 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop,
 			centisecs / 100, centisecs % 100,
 			kps / 1000, (kps % 1000) / 10);
 }
-
-/**
- *	swsusp_shrink_memory -  Try to free as much memory as needed
- *
- *	... but do not OOM-kill anyone
- *
- *	Notice: all userland should be stopped before it is called, or
- *	livelock is possible.
- */
-
-#define SHRINK_BITE	10000
-static inline unsigned long __shrink_memory(long tmp)
-{
-	if (tmp > SHRINK_BITE)
-		tmp = SHRINK_BITE;
-	return shrink_all_memory(tmp);
-}
-
-int swsusp_shrink_memory(void)
-{
-	long tmp;
-	struct zone *zone;
-	unsigned long pages = 0;
-	unsigned int i = 0;
-	char *p = "-\\|/";
-	struct timeval start, stop;
-
-	printk(KERN_INFO "PM: Shrinking memory...  ");
-	do_gettimeofday(&start);
-	do {
-		long size, highmem_size;
-
-		highmem_size = count_highmem_pages();
-		size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
-		tmp = size;
-		size += highmem_size;
-		for_each_populated_zone(zone) {
-			tmp += snapshot_additional_pages(zone);
-			if (is_highmem(zone)) {
-				highmem_size -=
-					zone_page_state(zone, NR_FREE_PAGES);
-			} else {
-				tmp -= zone_page_state(zone, NR_FREE_PAGES);
-				tmp += zone->lowmem_reserve[ZONE_NORMAL];
-			}
-		}
-
-		if (highmem_size < 0)
-			highmem_size = 0;
-
-		tmp += highmem_size;
-		if (tmp > 0) {
-			tmp = __shrink_memory(tmp);
-			if (!tmp)
-				return -ENOMEM;
-			pages += tmp;
-		} else if (size > image_size / PAGE_SIZE) {
-			tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
-			pages += tmp;
-		}
-		printk("\b%c", p[i++%4]);
-	} while (tmp > 0);
-	do_gettimeofday(&stop);
-	printk("\bdone (%lu pages freed)\n", pages);
-	swsusp_show_speed(&start, &stop, pages, "Freed");
-
-	return 0;
-}
-
-/*
- * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
- * resume.  The code below implements a mechanism allowing us to do that.
- */
-
-struct nvs_page {
-	unsigned long phys_start;
-	unsigned int size;
-	void *kaddr;
-	void *data;
-	struct list_head node;
-};
-
-static LIST_HEAD(nvs_list);
-
-/**
- *	hibernate_nvs_register - register platform NVS memory region to save
- *	@start - physical address of the region
- *	@size - size of the region
- *
- *	The NVS region need not be page-aligned (both ends) and we arrange
- *	things so that the data from page-aligned addresses in this region will
- *	be copied into separate RAM pages.
- */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
-{
-	struct nvs_page *entry, *next;
-
-	while (size > 0) {
-		unsigned int nr_bytes;
-
-		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
-		if (!entry)
-			goto Error;
-
-		list_add_tail(&entry->node, &nvs_list);
-		entry->phys_start = start;
-		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
-		entry->size = (size < nr_bytes) ? size : nr_bytes;
-
-		start += entry->size;
-		size -= entry->size;
-	}
-	return 0;
-
- Error:
-	list_for_each_entry_safe(entry, next, &nvs_list, node) {
-		list_del(&entry->node);
-		kfree(entry);
-	}
-	return -ENOMEM;
-}
-
-/**
- *	hibernate_nvs_free - free data pages allocated for saving NVS regions
- */
-void hibernate_nvs_free(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			free_page((unsigned long)entry->data);
-			entry->data = NULL;
-			if (entry->kaddr) {
-				iounmap(entry->kaddr);
-				entry->kaddr = NULL;
-			}
-		}
-}
-
-/**
- *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
- */
-int hibernate_nvs_alloc(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node) {
-		entry->data = (void *)__get_free_page(GFP_KERNEL);
-		if (!entry->data) {
-			hibernate_nvs_free();
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-/**
- *	hibernate_nvs_save - save NVS memory regions
- */
-void hibernate_nvs_save(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Saving platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			entry->kaddr = ioremap(entry->phys_start, entry->size);
-			memcpy(entry->data, entry->kaddr, entry->size);
-		}
-}
-
-/**
- *	hibernate_nvs_restore - restore NVS memory regions
- *
- *	This function is going to be called with interrupts disabled, so it
- *	cannot iounmap the virtual addresses used to access the NVS region.
- */
-void hibernate_nvs_restore(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data)
-			memcpy(entry->kaddr, entry->data, entry->size);
-}
diff --git a/kernel/profile.c b/kernel/profile.c
index 7724e0409ba..28cf26ad2d2 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -111,12 +111,6 @@ int __ref profile_init(void)
 	/* only text is profiled */
 	prof_len = (_etext - _stext) >> prof_shift;
 	buffer_bytes = prof_len*sizeof(atomic_t);
-	if (!slab_is_available()) {
-		prof_buffer = alloc_bootmem(buffer_bytes);
-		alloc_bootmem_cpumask_var(&prof_cpu_mask);
-		cpumask_copy(prof_cpu_mask, cpu_possible_mask);
-		return 0;
-	}
 
 	if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL))
 		return -ENOMEM;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 0692ab5a0d6..f6d8b8cb5e3 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -25,16 +25,6 @@
 
 
 /*
- * Initialize a new task whose father had been ptraced.
- *
- * Called from copy_process().
- */
-void ptrace_fork(struct task_struct *child, unsigned long clone_flags)
-{
-	arch_ptrace_fork(child, clone_flags);
-}
-
-/*
  * ptrace a task: make the debugger its new parent and
  * move it to the ptrace list.
  *
@@ -185,10 +175,11 @@ int ptrace_attach(struct task_struct *task)
 	if (same_thread_group(task, current))
 		goto out;
 
-	/* Protect exec's credential calculations against our interference;
-	 * SUID, SGID and LSM creds get determined differently under ptrace.
+	/* Protect the target's credential calculations against our
+	 * interference; SUID, SGID and LSM creds get determined differently
+	 * under ptrace.
 	 */
-	retval = mutex_lock_interruptible(&task->cred_exec_mutex);
+	retval = mutex_lock_interruptible(&task->cred_guard_mutex);
 	if (retval  < 0)
 		goto out;
 
@@ -232,7 +223,7 @@ repeat:
 bad:
 	write_unlock_irqrestore(&tasklist_lock, flags);
 	task_unlock(task);
-	mutex_unlock(&task->cred_exec_mutex);
+	mutex_unlock(&task->cred_guard_mutex);
 out:
 	return retval;
 }
@@ -304,6 +295,8 @@ int ptrace_detach(struct task_struct *child, unsigned int data)
 	if (child->ptrace) {
 		child->exit_code = data;
 		dead = __ptrace_detach(current, child);
+		if (!child->exit_state)
+			wake_up_process(child);
 	}
 	write_unlock_irq(&tasklist_lock);
 
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index ce97a4df64d..beb0e659adc 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -1356,17 +1356,11 @@ static int rcu_sched_grace_period(void *arg)
 
 		rcu_ctrlblk.sched_sleep = rcu_sched_sleeping;
 		spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
-		ret = 0;
+		ret = 0; /* unused */
 		__wait_event_interruptible(rcu_ctrlblk.sched_wq,
 			rcu_ctrlblk.sched_sleep != rcu_sched_sleeping,
 			ret);
 
-		/*
-		 * Signals would prevent us from sleeping, and we cannot
-		 * do much with them in any case.  So flush them.
-		 */
-		if (ret)
-			flush_signals(current);
 		couldsleepnext = 0;
 
 	} while (!kthread_should_stop());
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index d2a372fb0b9..0dccfbba6d2 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1259,31 +1259,44 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 	check_cpu_stall(rsp, rdp);
 
 	/* Is the RCU core waiting for a quiescent state from this CPU? */
-	if (rdp->qs_pending)
+	if (rdp->qs_pending) {
+		rdp->n_rp_qs_pending++;
 		return 1;
+	}
 
 	/* Does this CPU have callbacks ready to invoke? */
-	if (cpu_has_callbacks_ready_to_invoke(rdp))
+	if (cpu_has_callbacks_ready_to_invoke(rdp)) {
+		rdp->n_rp_cb_ready++;
 		return 1;
+	}
 
 	/* Has RCU gone idle with this CPU needing another grace period? */
-	if (cpu_needs_another_gp(rsp, rdp))
+	if (cpu_needs_another_gp(rsp, rdp)) {
+		rdp->n_rp_cpu_needs_gp++;
 		return 1;
+	}
 
 	/* Has another RCU grace period completed?  */
-	if (ACCESS_ONCE(rsp->completed) != rdp->completed) /* outside of lock */
+	if (ACCESS_ONCE(rsp->completed) != rdp->completed) { /* outside lock */
+		rdp->n_rp_gp_completed++;
 		return 1;
+	}
 
 	/* Has a new RCU grace period started? */
-	if (ACCESS_ONCE(rsp->gpnum) != rdp->gpnum) /* outside of lock */
+	if (ACCESS_ONCE(rsp->gpnum) != rdp->gpnum) { /* outside lock */
+		rdp->n_rp_gp_started++;
 		return 1;
+	}
 
 	/* Has an RCU GP gone long enough to send resched IPIs &c? */
 	if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
-	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
+	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)) {
+		rdp->n_rp_need_fqs++;
 		return 1;
+	}
 
 	/* nothing to do */
+	rdp->n_rp_need_nothing++;
 	return 0;
 }
 
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 4b1875ba940..fe1dcdbf1ca 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -213,7 +213,63 @@ static struct file_operations rcugp_fops = {
 	.release = single_release,
 };
 
-static struct dentry *rcudir, *datadir, *datadir_csv, *hierdir, *gpdir;
+static void print_one_rcu_pending(struct seq_file *m, struct rcu_data *rdp)
+{
+	seq_printf(m, "%3d%cnp=%ld "
+		   "qsp=%ld cbr=%ld cng=%ld gpc=%ld gps=%ld nf=%ld nn=%ld\n",
+		   rdp->cpu,
+		   cpu_is_offline(rdp->cpu) ? '!' : ' ',
+		   rdp->n_rcu_pending,
+		   rdp->n_rp_qs_pending,
+		   rdp->n_rp_cb_ready,
+		   rdp->n_rp_cpu_needs_gp,
+		   rdp->n_rp_gp_completed,
+		   rdp->n_rp_gp_started,
+		   rdp->n_rp_need_fqs,
+		   rdp->n_rp_need_nothing);
+}
+
+static void print_rcu_pendings(struct seq_file *m, struct rcu_state *rsp)
+{
+	int cpu;
+	struct rcu_data *rdp;
+
+	for_each_possible_cpu(cpu) {
+		rdp = rsp->rda[cpu];
+		if (rdp->beenonline)
+			print_one_rcu_pending(m, rdp);
+	}
+}
+
+static int show_rcu_pending(struct seq_file *m, void *unused)
+{
+	seq_puts(m, "rcu:\n");
+	print_rcu_pendings(m, &rcu_state);
+	seq_puts(m, "rcu_bh:\n");
+	print_rcu_pendings(m, &rcu_bh_state);
+	return 0;
+}
+
+static int rcu_pending_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_rcu_pending, NULL);
+}
+
+static struct file_operations rcu_pending_fops = {
+	.owner = THIS_MODULE,
+	.open = rcu_pending_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static struct dentry *rcudir;
+static struct dentry *datadir;
+static struct dentry *datadir_csv;
+static struct dentry *gpdir;
+static struct dentry *hierdir;
+static struct dentry *rcu_pendingdir;
+
 static int __init rcuclassic_trace_init(void)
 {
 	rcudir = debugfs_create_dir("rcu", NULL);
@@ -238,6 +294,11 @@ static int __init rcuclassic_trace_init(void)
 						NULL, &rcuhier_fops);
 	if (!hierdir)
 		goto free_out;
+
+	rcu_pendingdir = debugfs_create_file("rcu_pending", 0444, rcudir,
+						NULL, &rcu_pending_fops);
+	if (!rcu_pendingdir)
+		goto free_out;
 	return 0;
 free_out:
 	if (datadir)
@@ -257,6 +318,7 @@ static void __exit rcuclassic_trace_cleanup(void)
 	debugfs_remove(datadir_csv);
 	debugfs_remove(gpdir);
 	debugfs_remove(hierdir);
+	debugfs_remove(rcu_pendingdir);
 	debugfs_remove(rcudir);
 }
 
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index 69d9cb921ff..fcd107a78c5 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -300,7 +300,8 @@ static int rt_mutex_adjust_prio_chain(struct task_struct *task,
  * assigned pending owner [which might not have taken the
  * lock yet]:
  */
-static inline int try_to_steal_lock(struct rt_mutex *lock)
+static inline int try_to_steal_lock(struct rt_mutex *lock,
+				    struct task_struct *task)
 {
 	struct task_struct *pendowner = rt_mutex_owner(lock);
 	struct rt_mutex_waiter *next;
@@ -309,11 +310,11 @@ static inline int try_to_steal_lock(struct rt_mutex *lock)
 	if (!rt_mutex_owner_pending(lock))
 		return 0;
 
-	if (pendowner == current)
+	if (pendowner == task)
 		return 1;
 
 	spin_lock_irqsave(&pendowner->pi_lock, flags);
-	if (current->prio >= pendowner->prio) {
+	if (task->prio >= pendowner->prio) {
 		spin_unlock_irqrestore(&pendowner->pi_lock, flags);
 		return 0;
 	}
@@ -338,21 +339,21 @@ static inline int try_to_steal_lock(struct rt_mutex *lock)
 	 * We are going to steal the lock and a waiter was
 	 * enqueued on the pending owners pi_waiters queue. So
 	 * we have to enqueue this waiter into
-	 * current->pi_waiters list. This covers the case,
-	 * where current is boosted because it holds another
+	 * task->pi_waiters list. This covers the case,
+	 * where task is boosted because it holds another
 	 * lock and gets unboosted because the booster is
 	 * interrupted, so we would delay a waiter with higher
-	 * priority as current->normal_prio.
+	 * priority as task->normal_prio.
 	 *
 	 * Note: in the rare case of a SCHED_OTHER task changing
 	 * its priority and thus stealing the lock, next->task
-	 * might be current:
+	 * might be task:
 	 */
-	if (likely(next->task != current)) {
-		spin_lock_irqsave(&current->pi_lock, flags);
-		plist_add(&next->pi_list_entry, &current->pi_waiters);
-		__rt_mutex_adjust_prio(current);
-		spin_unlock_irqrestore(&current->pi_lock, flags);
+	if (likely(next->task != task)) {
+		spin_lock_irqsave(&task->pi_lock, flags);
+		plist_add(&next->pi_list_entry, &task->pi_waiters);
+		__rt_mutex_adjust_prio(task);
+		spin_unlock_irqrestore(&task->pi_lock, flags);
 	}
 	return 1;
 }
@@ -389,7 +390,7 @@ static int try_to_take_rt_mutex(struct rt_mutex *lock)
 	 */
 	mark_rt_mutex_waiters(lock);
 
-	if (rt_mutex_owner(lock) && !try_to_steal_lock(lock))
+	if (rt_mutex_owner(lock) && !try_to_steal_lock(lock, current))
 		return 0;
 
 	/* We got the lock. */
@@ -411,6 +412,7 @@ static int try_to_take_rt_mutex(struct rt_mutex *lock)
  */
 static int task_blocks_on_rt_mutex(struct rt_mutex *lock,
 				   struct rt_mutex_waiter *waiter,
+				   struct task_struct *task,
 				   int detect_deadlock)
 {
 	struct task_struct *owner = rt_mutex_owner(lock);
@@ -418,21 +420,21 @@ static int task_blocks_on_rt_mutex(struct rt_mutex *lock,
 	unsigned long flags;
 	int chain_walk = 0, res;
 
-	spin_lock_irqsave(&current->pi_lock, flags);
-	__rt_mutex_adjust_prio(current);
-	waiter->task = current;
+	spin_lock_irqsave(&task->pi_lock, flags);
+	__rt_mutex_adjust_prio(task);
+	waiter->task = task;
 	waiter->lock = lock;
-	plist_node_init(&waiter->list_entry, current->prio);
-	plist_node_init(&waiter->pi_list_entry, current->prio);
+	plist_node_init(&waiter->list_entry, task->prio);
+	plist_node_init(&waiter->pi_list_entry, task->prio);
 
 	/* Get the top priority waiter on the lock */
 	if (rt_mutex_has_waiters(lock))
 		top_waiter = rt_mutex_top_waiter(lock);
 	plist_add(&waiter->list_entry, &lock->wait_list);
 
-	current->pi_blocked_on = waiter;
+	task->pi_blocked_on = waiter;
 
-	spin_unlock_irqrestore(&current->pi_lock, flags);
+	spin_unlock_irqrestore(&task->pi_lock, flags);
 
 	if (waiter == rt_mutex_top_waiter(lock)) {
 		spin_lock_irqsave(&owner->pi_lock, flags);
@@ -460,7 +462,7 @@ static int task_blocks_on_rt_mutex(struct rt_mutex *lock,
 	spin_unlock(&lock->wait_lock);
 
 	res = rt_mutex_adjust_prio_chain(owner, detect_deadlock, lock, waiter,
-					 current);
+					 task);
 
 	spin_lock(&lock->wait_lock);
 
@@ -605,37 +607,25 @@ void rt_mutex_adjust_pi(struct task_struct *task)
 	rt_mutex_adjust_prio_chain(task, 0, NULL, NULL, task);
 }
 
-/*
- * Slow path lock function:
+/**
+ * __rt_mutex_slowlock() - Perform the wait-wake-try-to-take loop
+ * @lock:		 the rt_mutex to take
+ * @state:		 the state the task should block in (TASK_INTERRUPTIBLE
+ * 			 or TASK_UNINTERRUPTIBLE)
+ * @timeout:		 the pre-initialized and started timer, or NULL for none
+ * @waiter:		 the pre-initialized rt_mutex_waiter
+ * @detect_deadlock:	 passed to task_blocks_on_rt_mutex
+ *
+ * lock->wait_lock must be held by the caller.
  */
 static int __sched
-rt_mutex_slowlock(struct rt_mutex *lock, int state,
-		  struct hrtimer_sleeper *timeout,
-		  int detect_deadlock)
+__rt_mutex_slowlock(struct rt_mutex *lock, int state,
+		    struct hrtimer_sleeper *timeout,
+		    struct rt_mutex_waiter *waiter,
+		    int detect_deadlock)
 {
-	struct rt_mutex_waiter waiter;
 	int ret = 0;
 
-	debug_rt_mutex_init_waiter(&waiter);
-	waiter.task = NULL;
-
-	spin_lock(&lock->wait_lock);
-
-	/* Try to acquire the lock again: */
-	if (try_to_take_rt_mutex(lock)) {
-		spin_unlock(&lock->wait_lock);
-		return 0;
-	}
-
-	set_current_state(state);
-
-	/* Setup the timer, when timeout != NULL */
-	if (unlikely(timeout)) {
-		hrtimer_start_expires(&timeout->timer, HRTIMER_MODE_ABS);
-		if (!hrtimer_active(&timeout->timer))
-			timeout->task = NULL;
-	}
-
 	for (;;) {
 		/* Try to acquire the lock: */
 		if (try_to_take_rt_mutex(lock))
@@ -656,19 +646,19 @@ rt_mutex_slowlock(struct rt_mutex *lock, int state,
 		}
 
 		/*
-		 * waiter.task is NULL the first time we come here and
+		 * waiter->task is NULL the first time we come here and
 		 * when we have been woken up by the previous owner
 		 * but the lock got stolen by a higher prio task.
 		 */
-		if (!waiter.task) {
-			ret = task_blocks_on_rt_mutex(lock, &waiter,
+		if (!waiter->task) {
+			ret = task_blocks_on_rt_mutex(lock, waiter, current,
 						      detect_deadlock);
 			/*
 			 * If we got woken up by the owner then start loop
 			 * all over without going into schedule to try
 			 * to get the lock now:
 			 */
-			if (unlikely(!waiter.task)) {
+			if (unlikely(!waiter->task)) {
 				/*
 				 * Reset the return value. We might
 				 * have returned with -EDEADLK and the
@@ -684,15 +674,52 @@ rt_mutex_slowlock(struct rt_mutex *lock, int state,
 
 		spin_unlock(&lock->wait_lock);
 
-		debug_rt_mutex_print_deadlock(&waiter);
+		debug_rt_mutex_print_deadlock(waiter);
 
-		if (waiter.task)
+		if (waiter->task)
 			schedule_rt_mutex(lock);
 
 		spin_lock(&lock->wait_lock);
 		set_current_state(state);
 	}
 
+	return ret;
+}
+
+/*
+ * Slow path lock function:
+ */
+static int __sched
+rt_mutex_slowlock(struct rt_mutex *lock, int state,
+		  struct hrtimer_sleeper *timeout,
+		  int detect_deadlock)
+{
+	struct rt_mutex_waiter waiter;
+	int ret = 0;
+
+	debug_rt_mutex_init_waiter(&waiter);
+	waiter.task = NULL;
+
+	spin_lock(&lock->wait_lock);
+
+	/* Try to acquire the lock again: */
+	if (try_to_take_rt_mutex(lock)) {
+		spin_unlock(&lock->wait_lock);
+		return 0;
+	}
+
+	set_current_state(state);
+
+	/* Setup the timer, when timeout != NULL */
+	if (unlikely(timeout)) {
+		hrtimer_start_expires(&timeout->timer, HRTIMER_MODE_ABS);
+		if (!hrtimer_active(&timeout->timer))
+			timeout->task = NULL;
+	}
+
+	ret = __rt_mutex_slowlock(lock, state, timeout, &waiter,
+				  detect_deadlock);
+
 	set_current_state(TASK_RUNNING);
 
 	if (unlikely(waiter.task))
@@ -864,9 +891,9 @@ int __sched rt_mutex_lock_interruptible(struct rt_mutex *lock,
 EXPORT_SYMBOL_GPL(rt_mutex_lock_interruptible);
 
 /**
- * rt_mutex_lock_interruptible_ktime - lock a rt_mutex interruptible
- *				       the timeout structure is provided
- *				       by the caller
+ * rt_mutex_timed_lock - lock a rt_mutex interruptible
+ *			the timeout structure is provided
+ *			by the caller
  *
  * @lock: 		the rt_mutex to be locked
  * @timeout:		timeout structure or NULL (no timeout)
@@ -875,7 +902,7 @@ EXPORT_SYMBOL_GPL(rt_mutex_lock_interruptible);
  * Returns:
  *  0 		on success
  * -EINTR 	when interrupted by a signal
- * -ETIMEOUT	when the timeout expired
+ * -ETIMEDOUT	when the timeout expired
  * -EDEADLK	when the lock would deadlock (when deadlock detection is on)
  */
 int
@@ -913,7 +940,7 @@ void __sched rt_mutex_unlock(struct rt_mutex *lock)
 }
 EXPORT_SYMBOL_GPL(rt_mutex_unlock);
 
-/***
+/**
  * rt_mutex_destroy - mark a mutex unusable
  * @lock: the mutex to be destroyed
  *
@@ -986,6 +1013,59 @@ void rt_mutex_proxy_unlock(struct rt_mutex *lock,
 }
 
 /**
+ * rt_mutex_start_proxy_lock() - Start lock acquisition for another task
+ * @lock:		the rt_mutex to take
+ * @waiter:		the pre-initialized rt_mutex_waiter
+ * @task:		the task to prepare
+ * @detect_deadlock:	perform deadlock detection (1) or not (0)
+ *
+ * Returns:
+ *  0 - task blocked on lock
+ *  1 - acquired the lock for task, caller should wake it up
+ * <0 - error
+ *
+ * Special API call for FUTEX_REQUEUE_PI support.
+ */
+int rt_mutex_start_proxy_lock(struct rt_mutex *lock,
+			      struct rt_mutex_waiter *waiter,
+			      struct task_struct *task, int detect_deadlock)
+{
+	int ret;
+
+	spin_lock(&lock->wait_lock);
+
+	mark_rt_mutex_waiters(lock);
+
+	if (!rt_mutex_owner(lock) || try_to_steal_lock(lock, task)) {
+		/* We got the lock for task. */
+		debug_rt_mutex_lock(lock);
+
+		rt_mutex_set_owner(lock, task, 0);
+
+		rt_mutex_deadlock_account_lock(lock, task);
+		return 1;
+	}
+
+	ret = task_blocks_on_rt_mutex(lock, waiter, task, detect_deadlock);
+
+
+	if (ret && !waiter->task) {
+		/*
+		 * Reset the return value. We might have
+		 * returned with -EDEADLK and the owner
+		 * released the lock while we were walking the
+		 * pi chain.  Let the waiter sort it out.
+		 */
+		ret = 0;
+	}
+	spin_unlock(&lock->wait_lock);
+
+	debug_rt_mutex_print_deadlock(waiter);
+
+	return ret;
+}
+
+/**
  * rt_mutex_next_owner - return the next owner of the lock
  *
  * @lock: the rt lock query
@@ -1004,3 +1084,57 @@ struct task_struct *rt_mutex_next_owner(struct rt_mutex *lock)
 
 	return rt_mutex_top_waiter(lock)->task;
 }
+
+/**
+ * rt_mutex_finish_proxy_lock() - Complete lock acquisition
+ * @lock:		the rt_mutex we were woken on
+ * @to:			the timeout, null if none. hrtimer should already have
+ * 			been started.
+ * @waiter:		the pre-initialized rt_mutex_waiter
+ * @detect_deadlock:	perform deadlock detection (1) or not (0)
+ *
+ * Complete the lock acquisition started our behalf by another thread.
+ *
+ * Returns:
+ *  0 - success
+ * <0 - error, one of -EINTR, -ETIMEDOUT, or -EDEADLK
+ *
+ * Special API call for PI-futex requeue support
+ */
+int rt_mutex_finish_proxy_lock(struct rt_mutex *lock,
+			       struct hrtimer_sleeper *to,
+			       struct rt_mutex_waiter *waiter,
+			       int detect_deadlock)
+{
+	int ret;
+
+	spin_lock(&lock->wait_lock);
+
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	ret = __rt_mutex_slowlock(lock, TASK_INTERRUPTIBLE, to, waiter,
+				  detect_deadlock);
+
+	set_current_state(TASK_RUNNING);
+
+	if (unlikely(waiter->task))
+		remove_waiter(lock, waiter);
+
+	/*
+	 * try_to_take_rt_mutex() sets the waiter bit unconditionally. We might
+	 * have to fix that up.
+	 */
+	fixup_rt_mutex_waiters(lock);
+
+	spin_unlock(&lock->wait_lock);
+
+	/*
+	 * Readjust priority, when we did not get the lock. We might have been
+	 * the pending owner and boosted. Since we did not take the lock, the
+	 * PI boost has to go.
+	 */
+	if (unlikely(ret))
+		rt_mutex_adjust_prio(current);
+
+	return ret;
+}
diff --git a/kernel/rtmutex_common.h b/kernel/rtmutex_common.h
index e124bf5800e..97a2f81866a 100644
--- a/kernel/rtmutex_common.h
+++ b/kernel/rtmutex_common.h
@@ -120,6 +120,14 @@ extern void rt_mutex_init_proxy_locked(struct rt_mutex *lock,
 				       struct task_struct *proxy_owner);
 extern void rt_mutex_proxy_unlock(struct rt_mutex *lock,
 				  struct task_struct *proxy_owner);
+extern int rt_mutex_start_proxy_lock(struct rt_mutex *lock,
+				     struct rt_mutex_waiter *waiter,
+				     struct task_struct *task,
+				     int detect_deadlock);
+extern int rt_mutex_finish_proxy_lock(struct rt_mutex *lock,
+				      struct hrtimer_sleeper *to,
+				      struct rt_mutex_waiter *waiter,
+				      int detect_deadlock);
 
 #ifdef CONFIG_DEBUG_RT_MUTEXES
 # include "rtmutex-debug.h"
diff --git a/kernel/sched.c b/kernel/sched.c
index 26efa475bdc..8ec9d13140b 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -39,6 +39,7 @@
 #include <linux/completion.h>
 #include <linux/kernel_stat.h>
 #include <linux/debug_locks.h>
+#include <linux/perf_counter.h>
 #include <linux/security.h>
 #include <linux/notifier.h>
 #include <linux/profile.h>
@@ -68,17 +69,18 @@
 #include <linux/pagemap.h>
 #include <linux/hrtimer.h>
 #include <linux/tick.h>
-#include <linux/bootmem.h>
 #include <linux/debugfs.h>
 #include <linux/ctype.h>
 #include <linux/ftrace.h>
-#include <trace/sched.h>
 
 #include <asm/tlb.h>
 #include <asm/irq_regs.h>
 
 #include "sched_cpupri.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/sched.h>
+
 /*
  * Convert user-nice values [ -20 ... 0 ... 19 ]
  * to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
@@ -118,12 +120,6 @@
  */
 #define RUNTIME_INF	((u64)~0ULL)
 
-DEFINE_TRACE(sched_wait_task);
-DEFINE_TRACE(sched_wakeup);
-DEFINE_TRACE(sched_wakeup_new);
-DEFINE_TRACE(sched_switch);
-DEFINE_TRACE(sched_migrate_task);
-
 #ifdef CONFIG_SMP
 
 static void double_rq_lock(struct rq *rq1, struct rq *rq2);
@@ -584,6 +580,7 @@ struct rq {
 	struct load_weight load;
 	unsigned long nr_load_updates;
 	u64 nr_switches;
+	u64 nr_migrations_in;
 
 	struct cfs_rq cfs;
 	struct rt_rq rt;
@@ -630,6 +627,10 @@ struct rq {
 	struct list_head migration_queue;
 #endif
 
+	/* calc_load related fields */
+	unsigned long calc_load_update;
+	long calc_load_active;
+
 #ifdef CONFIG_SCHED_HRTICK
 #ifdef CONFIG_SMP
 	int hrtick_csd_pending;
@@ -692,7 +693,7 @@ static inline int cpu_of(struct rq *rq)
 #define task_rq(p)		cpu_rq(task_cpu(p))
 #define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
 
-static inline void update_rq_clock(struct rq *rq)
+inline void update_rq_clock(struct rq *rq)
 {
 	rq->clock = sched_clock_cpu(cpu_of(rq));
 }
@@ -1728,6 +1729,8 @@ static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
 }
 #endif
 
+static void calc_load_account_active(struct rq *this_rq);
+
 #include "sched_stats.h"
 #include "sched_idletask.c"
 #include "sched_fair.c"
@@ -1958,7 +1961,7 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
 
 	clock_offset = old_rq->clock - new_rq->clock;
 
-	trace_sched_migrate_task(p, task_cpu(p), new_cpu);
+	trace_sched_migrate_task(p, new_cpu);
 
 #ifdef CONFIG_SCHEDSTATS
 	if (p->se.wait_start)
@@ -1967,12 +1970,16 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
 		p->se.sleep_start -= clock_offset;
 	if (p->se.block_start)
 		p->se.block_start -= clock_offset;
+#endif
 	if (old_cpu != new_cpu) {
-		schedstat_inc(p, se.nr_migrations);
+		p->se.nr_migrations++;
+		new_rq->nr_migrations_in++;
+#ifdef CONFIG_SCHEDSTATS
 		if (task_hot(p, old_rq->clock, NULL))
 			schedstat_inc(p, se.nr_forced2_migrations);
-	}
 #endif
+		perf_counter_task_migration(p, new_cpu);
+	}
 	p->se.vruntime -= old_cfsrq->min_vruntime -
 					 new_cfsrq->min_vruntime;
 
@@ -2015,6 +2022,49 @@ migrate_task(struct task_struct *p, int dest_cpu, struct migration_req *req)
 }
 
 /*
+ * wait_task_context_switch -	wait for a thread to complete at least one
+ *				context switch.
+ *
+ * @p must not be current.
+ */
+void wait_task_context_switch(struct task_struct *p)
+{
+	unsigned long nvcsw, nivcsw, flags;
+	int running;
+	struct rq *rq;
+
+	nvcsw	= p->nvcsw;
+	nivcsw	= p->nivcsw;
+	for (;;) {
+		/*
+		 * The runqueue is assigned before the actual context
+		 * switch. We need to take the runqueue lock.
+		 *
+		 * We could check initially without the lock but it is
+		 * very likely that we need to take the lock in every
+		 * iteration.
+		 */
+		rq = task_rq_lock(p, &flags);
+		running = task_running(rq, p);
+		task_rq_unlock(rq, &flags);
+
+		if (likely(!running))
+			break;
+		/*
+		 * The switch count is incremented before the actual
+		 * context switch. We thus wait for two switches to be
+		 * sure at least one completed.
+		 */
+		if ((p->nvcsw - nvcsw) > 1)
+			break;
+		if ((p->nivcsw - nivcsw) > 1)
+			break;
+
+		cpu_relax();
+	}
+}
+
+/*
  * wait_task_inactive - wait for a thread to unschedule.
  *
  * If @match_state is nonzero, it's the @p->state value just checked and
@@ -2142,6 +2192,7 @@ void kick_process(struct task_struct *p)
 		smp_send_reschedule(cpu);
 	preempt_enable();
 }
+EXPORT_SYMBOL_GPL(kick_process);
 
 /*
  * Return a low guess at the load of a migration-source cpu weighted
@@ -2324,6 +2375,27 @@ static int sched_balance_self(int cpu, int flag)
 
 #endif /* CONFIG_SMP */
 
+/**
+ * task_oncpu_function_call - call a function on the cpu on which a task runs
+ * @p:		the task to evaluate
+ * @func:	the function to be called
+ * @info:	the function call argument
+ *
+ * Calls the function @func when the task is currently running. This might
+ * be on the current CPU, which just calls the function directly
+ */
+void task_oncpu_function_call(struct task_struct *p,
+			      void (*func) (void *info), void *info)
+{
+	int cpu;
+
+	preempt_disable();
+	cpu = task_cpu(p);
+	if (task_curr(p))
+		smp_call_function_single(cpu, func, info, 1);
+	preempt_enable();
+}
+
 /***
  * try_to_wake_up - wake up a thread
  * @p: the to-be-woken-up thread
@@ -2458,6 +2530,17 @@ out:
 	return success;
 }
 
+/**
+ * wake_up_process - Wake up a specific process
+ * @p: The process to be woken up.
+ *
+ * Attempt to wake up the nominated process and move it to the set of runnable
+ * processes.  Returns 1 if the process was woken up, 0 if it was already
+ * running.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
+ */
 int wake_up_process(struct task_struct *p)
 {
 	return try_to_wake_up(p, TASK_ALL, 0);
@@ -2480,6 +2563,7 @@ static void __sched_fork(struct task_struct *p)
 	p->se.exec_start		= 0;
 	p->se.sum_exec_runtime		= 0;
 	p->se.prev_sum_exec_runtime	= 0;
+	p->se.nr_migrations		= 0;
 	p->se.last_wakeup		= 0;
 	p->se.avg_overlap		= 0;
 	p->se.start_runtime		= 0;
@@ -2710,6 +2794,7 @@ static void finish_task_switch(struct rq *rq, struct task_struct *prev)
 	 */
 	prev_state = prev->state;
 	finish_arch_switch(prev);
+	perf_counter_task_sched_in(current, cpu_of(rq));
 	finish_lock_switch(rq, prev);
 #ifdef CONFIG_SMP
 	if (post_schedule)
@@ -2766,7 +2851,7 @@ context_switch(struct rq *rq, struct task_struct *prev,
 	 * combine the page table reload and the switch backend into
 	 * one hypercall.
 	 */
-	arch_enter_lazy_cpu_mode();
+	arch_start_context_switch(prev);
 
 	if (unlikely(!mm)) {
 		next->active_mm = oldmm;
@@ -2856,19 +2941,81 @@ unsigned long nr_iowait(void)
 	return sum;
 }
 
-unsigned long nr_active(void)
+/* Variables and functions for calc_load */
+static atomic_long_t calc_load_tasks;
+static unsigned long calc_load_update;
+unsigned long avenrun[3];
+EXPORT_SYMBOL(avenrun);
+
+/**
+ * get_avenrun - get the load average array
+ * @loads:	pointer to dest load array
+ * @offset:	offset to add
+ * @shift:	shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
 {
-	unsigned long i, running = 0, uninterruptible = 0;
+	loads[0] = (avenrun[0] + offset) << shift;
+	loads[1] = (avenrun[1] + offset) << shift;
+	loads[2] = (avenrun[2] + offset) << shift;
+}
 
-	for_each_online_cpu(i) {
-		running += cpu_rq(i)->nr_running;
-		uninterruptible += cpu_rq(i)->nr_uninterruptible;
-	}
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+	load *= exp;
+	load += active * (FIXED_1 - exp);
+	return load >> FSHIFT;
+}
 
-	if (unlikely((long)uninterruptible < 0))
-		uninterruptible = 0;
+/*
+ * calc_load - update the avenrun load estimates 10 ticks after the
+ * CPUs have updated calc_load_tasks.
+ */
+void calc_global_load(void)
+{
+	unsigned long upd = calc_load_update + 10;
+	long active;
 
-	return running + uninterruptible;
+	if (time_before(jiffies, upd))
+		return;
+
+	active = atomic_long_read(&calc_load_tasks);
+	active = active > 0 ? active * FIXED_1 : 0;
+
+	avenrun[0] = calc_load(avenrun[0], EXP_1, active);
+	avenrun[1] = calc_load(avenrun[1], EXP_5, active);
+	avenrun[2] = calc_load(avenrun[2], EXP_15, active);
+
+	calc_load_update += LOAD_FREQ;
+}
+
+/*
+ * Either called from update_cpu_load() or from a cpu going idle
+ */
+static void calc_load_account_active(struct rq *this_rq)
+{
+	long nr_active, delta;
+
+	nr_active = this_rq->nr_running;
+	nr_active += (long) this_rq->nr_uninterruptible;
+
+	if (nr_active != this_rq->calc_load_active) {
+		delta = nr_active - this_rq->calc_load_active;
+		this_rq->calc_load_active = nr_active;
+		atomic_long_add(delta, &calc_load_tasks);
+	}
+}
+
+/*
+ * Externally visible per-cpu scheduler statistics:
+ * cpu_nr_migrations(cpu) - number of migrations into that cpu
+ */
+u64 cpu_nr_migrations(int cpu)
+{
+	return cpu_rq(cpu)->nr_migrations_in;
 }
 
 /*
@@ -2899,6 +3046,11 @@ static void update_cpu_load(struct rq *this_rq)
 			new_load += scale-1;
 		this_rq->cpu_load[i] = (old_load*(scale-1) + new_load) >> i;
 	}
+
+	if (time_after_eq(jiffies, this_rq->calc_load_update)) {
+		this_rq->calc_load_update += LOAD_FREQ;
+		calc_load_account_active(this_rq);
+	}
 }
 
 #ifdef CONFIG_SMP
@@ -4240,10 +4392,126 @@ static void active_load_balance(struct rq *busiest_rq, int busiest_cpu)
 static struct {
 	atomic_t load_balancer;
 	cpumask_var_t cpu_mask;
+	cpumask_var_t ilb_grp_nohz_mask;
 } nohz ____cacheline_aligned = {
 	.load_balancer = ATOMIC_INIT(-1),
 };
 
+#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
+/**
+ * lowest_flag_domain - Return lowest sched_domain containing flag.
+ * @cpu:	The cpu whose lowest level of sched domain is to
+ *		be returned.
+ * @flag:	The flag to check for the lowest sched_domain
+ *		for the given cpu.
+ *
+ * Returns the lowest sched_domain of a cpu which contains the given flag.
+ */
+static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
+{
+	struct sched_domain *sd;
+
+	for_each_domain(cpu, sd)
+		if (sd && (sd->flags & flag))
+			break;
+
+	return sd;
+}
+
+/**
+ * for_each_flag_domain - Iterates over sched_domains containing the flag.
+ * @cpu:	The cpu whose domains we're iterating over.
+ * @sd:		variable holding the value of the power_savings_sd
+ *		for cpu.
+ * @flag:	The flag to filter the sched_domains to be iterated.
+ *
+ * Iterates over all the scheduler domains for a given cpu that has the 'flag'
+ * set, starting from the lowest sched_domain to the highest.
+ */
+#define for_each_flag_domain(cpu, sd, flag) \
+	for (sd = lowest_flag_domain(cpu, flag); \
+		(sd && (sd->flags & flag)); sd = sd->parent)
+
+/**
+ * is_semi_idle_group - Checks if the given sched_group is semi-idle.
+ * @ilb_group:	group to be checked for semi-idleness
+ *
+ * Returns:	1 if the group is semi-idle. 0 otherwise.
+ *
+ * We define a sched_group to be semi idle if it has atleast one idle-CPU
+ * and atleast one non-idle CPU. This helper function checks if the given
+ * sched_group is semi-idle or not.
+ */
+static inline int is_semi_idle_group(struct sched_group *ilb_group)
+{
+	cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask,
+					sched_group_cpus(ilb_group));
+
+	/*
+	 * A sched_group is semi-idle when it has atleast one busy cpu
+	 * and atleast one idle cpu.
+	 */
+	if (cpumask_empty(nohz.ilb_grp_nohz_mask))
+		return 0;
+
+	if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group)))
+		return 0;
+
+	return 1;
+}
+/**
+ * find_new_ilb - Finds the optimum idle load balancer for nomination.
+ * @cpu:	The cpu which is nominating a new idle_load_balancer.
+ *
+ * Returns:	Returns the id of the idle load balancer if it exists,
+ *		Else, returns >= nr_cpu_ids.
+ *
+ * This algorithm picks the idle load balancer such that it belongs to a
+ * semi-idle powersavings sched_domain. The idea is to try and avoid
+ * completely idle packages/cores just for the purpose of idle load balancing
+ * when there are other idle cpu's which are better suited for that job.
+ */
+static int find_new_ilb(int cpu)
+{
+	struct sched_domain *sd;
+	struct sched_group *ilb_group;
+
+	/*
+	 * Have idle load balancer selection from semi-idle packages only
+	 * when power-aware load balancing is enabled
+	 */
+	if (!(sched_smt_power_savings || sched_mc_power_savings))
+		goto out_done;
+
+	/*
+	 * Optimize for the case when we have no idle CPUs or only one
+	 * idle CPU. Don't walk the sched_domain hierarchy in such cases
+	 */
+	if (cpumask_weight(nohz.cpu_mask) < 2)
+		goto out_done;
+
+	for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
+		ilb_group = sd->groups;
+
+		do {
+			if (is_semi_idle_group(ilb_group))
+				return cpumask_first(nohz.ilb_grp_nohz_mask);
+
+			ilb_group = ilb_group->next;
+
+		} while (ilb_group != sd->groups);
+	}
+
+out_done:
+	return cpumask_first(nohz.cpu_mask);
+}
+#else /*  (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
+static inline int find_new_ilb(int call_cpu)
+{
+	return cpumask_first(nohz.cpu_mask);
+}
+#endif
+
 /*
  * This routine will try to nominate the ilb (idle load balancing)
  * owner among the cpus whose ticks are stopped. ilb owner will do the idle
@@ -4298,8 +4566,24 @@ int select_nohz_load_balancer(int stop_tick)
 			/* make me the ilb owner */
 			if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
 				return 1;
-		} else if (atomic_read(&nohz.load_balancer) == cpu)
+		} else if (atomic_read(&nohz.load_balancer) == cpu) {
+			int new_ilb;
+
+			if (!(sched_smt_power_savings ||
+						sched_mc_power_savings))
+				return 1;
+			/*
+			 * Check to see if there is a more power-efficient
+			 * ilb.
+			 */
+			new_ilb = find_new_ilb(cpu);
+			if (new_ilb < nr_cpu_ids && new_ilb != cpu) {
+				atomic_set(&nohz.load_balancer, -1);
+				resched_cpu(new_ilb);
+				return 0;
+			}
 			return 1;
+		}
 	} else {
 		if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
 			return 0;
@@ -4468,15 +4752,7 @@ static inline void trigger_load_balance(struct rq *rq, int cpu)
 		}
 
 		if (atomic_read(&nohz.load_balancer) == -1) {
-			/*
-			 * simple selection for now: Nominate the
-			 * first cpu in the nohz list to be the next
-			 * ilb owner.
-			 *
-			 * TBD: Traverse the sched domains and nominate
-			 * the nearest cpu in the nohz.cpu_mask.
-			 */
-			int ilb = cpumask_first(nohz.cpu_mask);
+			int ilb = find_new_ilb(cpu);
 
 			if (ilb < nr_cpu_ids)
 				resched_cpu(ilb);
@@ -4840,6 +5116,8 @@ void scheduler_tick(void)
 	curr->sched_class->task_tick(rq, curr, 0);
 	spin_unlock(&rq->lock);
 
+	perf_counter_task_tick(curr, cpu);
+
 #ifdef CONFIG_SMP
 	rq->idle_at_tick = idle_cpu(cpu);
 	trigger_load_balance(rq, cpu);
@@ -5007,13 +5285,15 @@ pick_next_task(struct rq *rq)
 /*
  * schedule() is the main scheduler function.
  */
-asmlinkage void __sched __schedule(void)
+asmlinkage void __sched schedule(void)
 {
 	struct task_struct *prev, *next;
 	unsigned long *switch_count;
 	struct rq *rq;
 	int cpu;
 
+need_resched:
+	preempt_disable();
 	cpu = smp_processor_id();
 	rq = cpu_rq(cpu);
 	rcu_qsctr_inc(cpu);
@@ -5053,6 +5333,7 @@ need_resched_nonpreemptible:
 
 	if (likely(prev != next)) {
 		sched_info_switch(prev, next);
+		perf_counter_task_sched_out(prev, next, cpu);
 
 		rq->nr_switches++;
 		rq->curr = next;
@@ -5070,15 +5351,9 @@ need_resched_nonpreemptible:
 
 	if (unlikely(reacquire_kernel_lock(current) < 0))
 		goto need_resched_nonpreemptible;
-}
 
-asmlinkage void __sched schedule(void)
-{
-need_resched:
-	preempt_disable();
-	__schedule();
 	preempt_enable_no_resched();
-	if (unlikely(test_thread_flag(TIF_NEED_RESCHED)))
+	if (need_resched())
 		goto need_resched;
 }
 EXPORT_SYMBOL(schedule);
@@ -5221,7 +5496,7 @@ EXPORT_SYMBOL(default_wake_function);
  * started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
  * zero in this (rare) case, and we handle it by continuing to scan the queue.
  */
-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
 			int nr_exclusive, int sync, void *key)
 {
 	wait_queue_t *curr, *next;
@@ -5241,6 +5516,9 @@ void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
  * @mode: which threads
  * @nr_exclusive: how many wake-one or wake-many threads to wake up
  * @key: is directly passed to the wakeup function
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
  */
 void __wake_up(wait_queue_head_t *q, unsigned int mode,
 			int nr_exclusive, void *key)
@@ -5279,6 +5557,9 @@ void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key)
  * with each other. This can prevent needless bouncing between CPUs.
  *
  * On UP it can prevent extra preemption.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
  */
 void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode,
 			int nr_exclusive, void *key)
@@ -5315,6 +5596,9 @@ EXPORT_SYMBOL_GPL(__wake_up_sync);	/* For internal use only */
  * awakened in the same order in which they were queued.
  *
  * See also complete_all(), wait_for_completion() and related routines.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
  */
 void complete(struct completion *x)
 {
@@ -5332,6 +5616,9 @@ EXPORT_SYMBOL(complete);
  * @x:  holds the state of this particular completion
  *
  * This will wake up all threads waiting on this particular completion event.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
  */
 void complete_all(struct completion *x)
 {
@@ -6490,8 +6777,9 @@ void sched_show_task(struct task_struct *p)
 #ifdef CONFIG_DEBUG_STACK_USAGE
 	free = stack_not_used(p);
 #endif
-	printk(KERN_CONT "%5lu %5d %6d\n", free,
-		task_pid_nr(p), task_pid_nr(p->real_parent));
+	printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
+		task_pid_nr(p), task_pid_nr(p->real_parent),
+		(unsigned long)task_thread_info(p)->flags);
 
 	show_stack(p, NULL);
 }
@@ -6970,6 +7258,14 @@ static void migrate_dead_tasks(unsigned int dead_cpu)
 
 	}
 }
+
+/*
+ * remove the tasks which were accounted by rq from calc_load_tasks.
+ */
+static void calc_global_load_remove(struct rq *rq)
+{
+	atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+}
 #endif /* CONFIG_HOTPLUG_CPU */
 
 #if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
@@ -7204,6 +7500,8 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		/* Update our root-domain */
 		rq = cpu_rq(cpu);
 		spin_lock_irqsave(&rq->lock, flags);
+		rq->calc_load_update = calc_load_update;
+		rq->calc_load_active = 0;
 		if (rq->rd) {
 			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
 
@@ -7243,7 +7541,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		cpuset_unlock();
 		migrate_nr_uninterruptible(rq);
 		BUG_ON(rq->nr_running != 0);
-
+		calc_global_load_remove(rq);
 		/*
 		 * No need to migrate the tasks: it was best-effort if
 		 * they didn't take sched_hotcpu_mutex. Just wake up
@@ -7279,8 +7577,10 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	return NOTIFY_OK;
 }
 
-/* Register at highest priority so that task migration (migrate_all_tasks)
- * happens before everything else.
+/*
+ * Register at high priority so that task migration (migrate_all_tasks)
+ * happens before everything else.  This has to be lower priority than
+ * the notifier in the perf_counter subsystem, though.
  */
 static struct notifier_block __cpuinitdata migration_notifier = {
 	.notifier_call = migration_call,
@@ -7525,24 +7825,21 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd)
 
 static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)
 {
+	gfp_t gfp = GFP_KERNEL;
+
 	memset(rd, 0, sizeof(*rd));
 
-	if (bootmem) {
-		alloc_bootmem_cpumask_var(&def_root_domain.span);
-		alloc_bootmem_cpumask_var(&def_root_domain.online);
-		alloc_bootmem_cpumask_var(&def_root_domain.rto_mask);
-		cpupri_init(&rd->cpupri, true);
-		return 0;
-	}
+	if (bootmem)
+		gfp = GFP_NOWAIT;
 
-	if (!alloc_cpumask_var(&rd->span, GFP_KERNEL))
+	if (!alloc_cpumask_var(&rd->span, gfp))
 		goto out;
-	if (!alloc_cpumask_var(&rd->online, GFP_KERNEL))
+	if (!alloc_cpumask_var(&rd->online, gfp))
 		goto free_span;
-	if (!alloc_cpumask_var(&rd->rto_mask, GFP_KERNEL))
+	if (!alloc_cpumask_var(&rd->rto_mask, gfp))
 		goto free_online;
 
-	if (cpupri_init(&rd->cpupri, false) != 0)
+	if (cpupri_init(&rd->cpupri, bootmem) != 0)
 		goto free_rto_mask;
 	return 0;
 
@@ -7753,8 +8050,9 @@ int sched_smt_power_savings = 0, sched_mc_power_savings = 0;
 
 /*
  * The cpus mask in sched_group and sched_domain hangs off the end.
- * FIXME: use cpumask_var_t or dynamic percpu alloc to avoid wasting space
- * for nr_cpu_ids < CONFIG_NR_CPUS.
+ *
+ * ( See the the comments in include/linux/sched.h:struct sched_group
+ *   and struct sched_domain. )
  */
 struct static_sched_group {
 	struct sched_group sg;
@@ -7875,7 +8173,7 @@ static void init_numa_sched_groups_power(struct sched_group *group_head)
 			struct sched_domain *sd;
 
 			sd = &per_cpu(phys_domains, j).sd;
-			if (j != cpumask_first(sched_group_cpus(sd->groups))) {
+			if (j != group_first_cpu(sd->groups)) {
 				/*
 				 * Only add "power" once for each
 				 * physical package.
@@ -7953,7 +8251,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
 
 	WARN_ON(!sd || !sd->groups);
 
-	if (cpu != cpumask_first(sched_group_cpus(sd->groups)))
+	if (cpu != group_first_cpu(sd->groups))
 		return;
 
 	child = sd->child;
@@ -8865,7 +9163,7 @@ void __init sched_init(void)
 	 * we use alloc_bootmem().
 	 */
 	if (alloc_size) {
-		ptr = (unsigned long)alloc_bootmem(alloc_size);
+		ptr = (unsigned long)kzalloc(alloc_size, GFP_NOWAIT);
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
 		init_task_group.se = (struct sched_entity **)ptr;
@@ -8938,6 +9236,8 @@ void __init sched_init(void)
 		rq = cpu_rq(i);
 		spin_lock_init(&rq->lock);
 		rq->nr_running = 0;
+		rq->calc_load_active = 0;
+		rq->calc_load_update = jiffies + LOAD_FREQ;
 		init_cfs_rq(&rq->cfs, rq);
 		init_rt_rq(&rq->rt, rq);
 #ifdef CONFIG_FAIR_GROUP_SCHED
@@ -8958,7 +9258,7 @@ void __init sched_init(void)
 		 * 1024) and two child groups A0 and A1 (of weight 1024 each),
 		 * then A0's share of the cpu resource is:
 		 *
-		 * 	A0's bandwidth = 1024 / (10*1024 + 1024 + 1024) = 8.33%
+		 *	A0's bandwidth = 1024 / (10*1024 + 1024 + 1024) = 8.33%
 		 *
 		 * We achieve this by letting init_task_group's tasks sit
 		 * directly in rq->cfs (i.e init_task_group->se[] = NULL).
@@ -9045,20 +9345,26 @@ void __init sched_init(void)
 	 * when this runqueue becomes "idle".
 	 */
 	init_idle(current, smp_processor_id());
+
+	calc_load_update = jiffies + LOAD_FREQ;
+
 	/*
 	 * During early bootup we pretend to be a normal task:
 	 */
 	current->sched_class = &fair_sched_class;
 
 	/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
-	alloc_bootmem_cpumask_var(&nohz_cpu_mask);
+	alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
 #ifdef CONFIG_SMP
 #ifdef CONFIG_NO_HZ
-	alloc_bootmem_cpumask_var(&nohz.cpu_mask);
+	alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
+	alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
 #endif
-	alloc_bootmem_cpumask_var(&cpu_isolated_map);
+	alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
 #endif /* SMP */
 
+	perf_counter_init();
+
 	scheduler_running = 1;
 }
 
@@ -9800,6 +10106,13 @@ static int sched_rt_global_constraints(void)
 	if (sysctl_sched_rt_period <= 0)
 		return -EINVAL;
 
+	/*
+	 * There's always some RT tasks in the root group
+	 * -- migration, kstopmachine etc..
+	 */
+	if (sysctl_sched_rt_runtime == 0)
+		return -EBUSY;
+
 	spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
 	for_each_possible_cpu(i) {
 		struct rt_rq *rt_rq = &cpu_rq(i)->rt;
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 819f17ac796..e1d16c9a768 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -38,7 +38,8 @@
  */
 unsigned long long __attribute__((weak)) sched_clock(void)
 {
-	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+	return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+					* (NSEC_PER_SEC / HZ);
 }
 
 static __read_mostly int sched_clock_running;
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index cdd3c89574c..7deffc9f0e5 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -154,8 +154,12 @@ void cpupri_set(struct cpupri *cp, int cpu, int newpri)
  */
 int __init_refok cpupri_init(struct cpupri *cp, bool bootmem)
 {
+	gfp_t gfp = GFP_KERNEL;
 	int i;
 
+	if (bootmem)
+		gfp = GFP_NOWAIT;
+
 	memset(cp, 0, sizeof(*cp));
 
 	for (i = 0; i < CPUPRI_NR_PRIORITIES; i++) {
@@ -163,9 +167,7 @@ int __init_refok cpupri_init(struct cpupri *cp, bool bootmem)
 
 		spin_lock_init(&vec->lock);
 		vec->count = 0;
-		if (bootmem)
-			alloc_bootmem_cpumask_var(&vec->mask);
-		else if (!alloc_cpumask_var(&vec->mask, GFP_KERNEL))
+		if (!zalloc_cpumask_var(&vec->mask, gfp))
 			goto cleanup;
 	}
 
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 3816f217f11..5f9650e8fe7 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1487,17 +1487,10 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync)
 
 	find_matching_se(&se, &pse);
 
-	while (se) {
-		BUG_ON(!pse);
+	BUG_ON(!pse);
 
-		if (wakeup_preempt_entity(se, pse) == 1) {
-			resched_task(curr);
-			break;
-		}
-
-		se = parent_entity(se);
-		pse = parent_entity(pse);
-	}
+	if (wakeup_preempt_entity(se, pse) == 1)
+		resched_task(curr);
 }
 
 static struct task_struct *pick_next_task_fair(struct rq *rq)
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index 8a21a2e28c1..499672c10cb 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -22,7 +22,8 @@ static void check_preempt_curr_idle(struct rq *rq, struct task_struct *p, int sy
 static struct task_struct *pick_next_task_idle(struct rq *rq)
 {
 	schedstat_inc(rq, sched_goidle);
-
+	/* adjust the active tasks as we might go into a long sleep */
+	calc_load_account_active(rq);
 	return rq->idle;
 }
 
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index f2c66f8f971..9bf0d2a7304 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1591,7 +1591,7 @@ static inline void init_sched_rt_class(void)
 	unsigned int i;
 
 	for_each_possible_cpu(i)
-		alloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
+		zalloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
 					GFP_KERNEL, cpu_to_node(i));
 }
 #endif /* CONFIG_SMP */
diff --git a/kernel/signal.c b/kernel/signal.c
index d8034737db4..809a228019a 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -27,7 +27,7 @@
 #include <linux/freezer.h>
 #include <linux/pid_namespace.h>
 #include <linux/nsproxy.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
 
 #include <asm/param.h>
 #include <asm/uaccess.h>
@@ -41,8 +41,6 @@
 
 static struct kmem_cache *sigqueue_cachep;
 
-DEFINE_TRACE(sched_signal_send);
-
 static void __user *sig_handler(struct task_struct *t, int sig)
 {
 	return t->sighand->action[sig - 1].sa.sa_handler;
@@ -249,14 +247,19 @@ void flush_sigqueue(struct sigpending *queue)
 /*
  * Flush all pending signals for a task.
  */
+void __flush_signals(struct task_struct *t)
+{
+	clear_tsk_thread_flag(t, TIF_SIGPENDING);
+	flush_sigqueue(&t->pending);
+	flush_sigqueue(&t->signal->shared_pending);
+}
+
 void flush_signals(struct task_struct *t)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&t->sighand->siglock, flags);
-	clear_tsk_thread_flag(t, TIF_SIGPENDING);
-	flush_sigqueue(&t->pending);
-	flush_sigqueue(&t->signal->shared_pending);
+	__flush_signals(t);
 	spin_unlock_irqrestore(&t->sighand->siglock, flags);
 }
 
@@ -2278,24 +2281,17 @@ SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
 	return kill_something_info(sig, &info, pid);
 }
 
-static int do_tkill(pid_t tgid, pid_t pid, int sig)
+static int
+do_send_specific(pid_t tgid, pid_t pid, int sig, struct siginfo *info)
 {
-	int error;
-	struct siginfo info;
 	struct task_struct *p;
 	unsigned long flags;
-
-	error = -ESRCH;
-	info.si_signo = sig;
-	info.si_errno = 0;
-	info.si_code = SI_TKILL;
-	info.si_pid = task_tgid_vnr(current);
-	info.si_uid = current_uid();
+	int error = -ESRCH;
 
 	rcu_read_lock();
 	p = find_task_by_vpid(pid);
 	if (p && (tgid <= 0 || task_tgid_vnr(p) == tgid)) {
-		error = check_kill_permission(sig, &info, p);
+		error = check_kill_permission(sig, info, p);
 		/*
 		 * The null signal is a permissions and process existence
 		 * probe.  No signal is actually delivered.
@@ -2305,7 +2301,7 @@ static int do_tkill(pid_t tgid, pid_t pid, int sig)
 		 * signal is private anyway.
 		 */
 		if (!error && sig && lock_task_sighand(p, &flags)) {
-			error = specific_send_sig_info(sig, &info, p);
+			error = specific_send_sig_info(sig, info, p);
 			unlock_task_sighand(p, &flags);
 		}
 	}
@@ -2314,6 +2310,19 @@ static int do_tkill(pid_t tgid, pid_t pid, int sig)
 	return error;
 }
 
+static int do_tkill(pid_t tgid, pid_t pid, int sig)
+{
+	struct siginfo info;
+
+	info.si_signo = sig;
+	info.si_errno = 0;
+	info.si_code = SI_TKILL;
+	info.si_pid = task_tgid_vnr(current);
+	info.si_uid = current_uid();
+
+	return do_send_specific(tgid, pid, sig, &info);
+}
+
 /**
  *  sys_tgkill - send signal to one specific thread
  *  @tgid: the thread group ID of the thread
@@ -2363,6 +2372,32 @@ SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
 	return kill_proc_info(sig, &info, pid);
 }
 
+long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, siginfo_t *info)
+{
+	/* This is only valid for single tasks */
+	if (pid <= 0 || tgid <= 0)
+		return -EINVAL;
+
+	/* Not even root can pretend to send signals from the kernel.
+	   Nor can they impersonate a kill(), which adds source info.  */
+	if (info->si_code >= 0)
+		return -EPERM;
+	info->si_signo = sig;
+
+	return do_send_specific(tgid, pid, sig, info);
+}
+
+SYSCALL_DEFINE4(rt_tgsigqueueinfo, pid_t, tgid, pid_t, pid, int, sig,
+		siginfo_t __user *, uinfo)
+{
+	siginfo_t info;
+
+	if (copy_from_user(&info, uinfo, sizeof(siginfo_t)))
+		return -EFAULT;
+
+	return do_rt_tgsigqueueinfo(tgid, pid, sig, &info);
+}
+
 int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact)
 {
 	struct task_struct *t = current;
diff --git a/kernel/slow-work.c b/kernel/slow-work.c
index b28d19135f4..521ed2004d6 100644
--- a/kernel/slow-work.c
+++ b/kernel/slow-work.c
@@ -372,8 +372,8 @@ static int slow_work_thread(void *_data)
 		vsmax *= atomic_read(&slow_work_thread_count);
 		vsmax /= 100;
 
-		prepare_to_wait(&slow_work_thread_wq, &wait,
-				TASK_INTERRUPTIBLE);
+		prepare_to_wait_exclusive(&slow_work_thread_wq, &wait,
+					  TASK_INTERRUPTIBLE);
 		if (!freezing(current) &&
 		    !slow_work_threads_should_exit &&
 		    !slow_work_available(vsmax) &&
diff --git a/kernel/smp.c b/kernel/smp.c
index 858baac568e..ad63d850120 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -52,7 +52,7 @@ hotplug_cfd(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
-		if (!alloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
+		if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
 				cpu_to_node(cpu)))
 			return NOTIFY_BAD;
 		break;
diff --git a/kernel/softirq.c b/kernel/softirq.c
index b525dd34851..258885a543d 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -24,7 +24,9 @@
 #include <linux/ftrace.h>
 #include <linux/smp.h>
 #include <linux/tick.h>
-#include <trace/irq.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/irq.h>
 
 #include <asm/irq.h>
 /*
@@ -186,9 +188,6 @@ EXPORT_SYMBOL(local_bh_enable_ip);
  */
 #define MAX_SOFTIRQ_RESTART 10
 
-DEFINE_TRACE(softirq_entry);
-DEFINE_TRACE(softirq_exit);
-
 asmlinkage void __do_softirq(void)
 {
 	struct softirq_action *h;
@@ -828,7 +827,7 @@ int __init __weak arch_early_irq_init(void)
 	return 0;
 }
 
-int __weak arch_init_chip_data(struct irq_desc *desc, int cpu)
+int __weak arch_init_chip_data(struct irq_desc *desc, int node)
 {
 	return 0;
 }
diff --git a/kernel/sys.c b/kernel/sys.c
index e7998cf3149..438d99a38c8 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -14,6 +14,7 @@
 #include <linux/prctl.h>
 #include <linux/highuid.h>
 #include <linux/fs.h>
+#include <linux/perf_counter.h>
 #include <linux/resource.h>
 #include <linux/kernel.h>
 #include <linux/kexec.h>
@@ -1793,6 +1794,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 		case PR_SET_TSC:
 			error = SET_TSC_CTL(arg2);
 			break;
+		case PR_TASK_PERF_COUNTERS_DISABLE:
+			error = perf_counter_task_disable();
+			break;
+		case PR_TASK_PERF_COUNTERS_ENABLE:
+			error = perf_counter_task_enable();
+			break;
 		case PR_GET_TIMERSLACK:
 			error = current->timer_slack_ns;
 			break;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 27dad296738..68320f6b07b 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -175,3 +175,6 @@ cond_syscall(compat_sys_timerfd_settime);
 cond_syscall(compat_sys_timerfd_gettime);
 cond_syscall(sys_eventfd);
 cond_syscall(sys_eventfd2);
+
+/* performance counters: */
+cond_syscall(sys_perf_counter_open);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ea78fa101ad..ce664f98e3f 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -49,6 +49,7 @@
 #include <linux/reboot.h>
 #include <linux/ftrace.h>
 #include <linux/slow-work.h>
+#include <linux/perf_counter.h>
 
 #include <asm/uaccess.h>
 #include <asm/processor.h>
@@ -101,7 +102,6 @@ static int __maybe_unused one = 1;
 static int __maybe_unused two = 2;
 static unsigned long one_ul = 1;
 static int one_hundred = 100;
-static int one_thousand = 1000;
 
 /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
 static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
@@ -115,6 +115,7 @@ static int ngroups_max = NGROUPS_MAX;
 
 #ifdef CONFIG_MODULES
 extern char modprobe_path[];
+extern int modules_disabled;
 #endif
 #ifdef CONFIG_CHR_DEV_SG
 extern int sg_big_buff;
@@ -535,6 +536,17 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= &proc_dostring,
 		.strategy	= &sysctl_string,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "modules_disabled",
+		.data		= &modules_disabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		/* only handle a transition from default "0" to "1" */
+		.proc_handler	= &proc_dointvec_minmax,
+		.extra1		= &one,
+		.extra2		= &one,
+	},
 #endif
 #if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
 	{
@@ -732,6 +744,14 @@ static struct ctl_table kern_table[] = {
 	},
 	{
 		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "bootloader_version",
+		.data		= &bootloader_version,
+		.maxlen		= sizeof (int),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "kstack_depth_to_print",
 		.data		= &kstack_depth_to_print,
 		.maxlen		= sizeof(int),
@@ -913,6 +933,32 @@ static struct ctl_table kern_table[] = {
 		.child		= slow_work_sysctls,
 	},
 #endif
+#ifdef CONFIG_PERF_COUNTERS
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "perf_counter_paranoid",
+		.data		= &sysctl_perf_counter_paranoid,
+		.maxlen		= sizeof(sysctl_perf_counter_paranoid),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "perf_counter_mlock_kb",
+		.data		= &sysctl_perf_counter_mlock,
+		.maxlen		= sizeof(sysctl_perf_counter_mlock),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "perf_counter_max_sample_rate",
+		.data		= &sysctl_perf_counter_sample_rate,
+		.maxlen		= sizeof(sysctl_perf_counter_sample_rate),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+#endif
 /*
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
@@ -1034,28 +1080,6 @@ static struct ctl_table vm_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "nr_pdflush_threads_min",
-		.data		= &nr_pdflush_threads_min,
-		.maxlen		= sizeof nr_pdflush_threads_min,
-		.mode		= 0644 /* read-write */,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
-		.extra1		= &one,
-		.extra2		= &nr_pdflush_threads_max,
-	},
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "nr_pdflush_threads_max",
-		.data		= &nr_pdflush_threads_max,
-		.maxlen		= sizeof nr_pdflush_threads_max,
-		.mode		= 0644 /* read-write */,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
-		.extra1		= &nr_pdflush_threads_min,
-		.extra2		= &one_thousand,
-	},
-	{
 		.ctl_name	= VM_SWAPPINESS,
 		.procname	= "swappiness",
 		.data		= &vm_swappiness,
@@ -1248,7 +1272,6 @@ static struct ctl_table vm_table[] = {
 		.strategy	= &sysctl_jiffies,
 	},
 #endif
-#ifdef CONFIG_SECURITY
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "mmap_min_addr",
@@ -1257,7 +1280,6 @@ static struct ctl_table vm_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_doulongvec_minmax,
 	},
-#endif
 #ifdef CONFIG_NUMA
 	{
 		.ctl_name	= CTL_UNNUMBERED,
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index ecfd7b5187e..80189f6f1c5 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -402,9 +402,6 @@ int clocksource_register(struct clocksource *c)
 	unsigned long flags;
 	int ret;
 
-	/* save mult_orig on registration */
-	c->mult_orig = c->mult;
-
 	spin_lock_irqsave(&clocksource_lock, flags);
 	ret = clocksource_enqueue(c);
 	if (!ret)
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 687dff49f6e..e8c77d9c633 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -22,7 +22,7 @@
 
 /*
  * This read-write spinlock protects us from races in SMP while
- * playing with xtime and avenrun.
+ * playing with xtime.
  */
 __cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
 
@@ -77,6 +77,10 @@ static void clocksource_forward_now(void)
 	clock->cycle_last = cycle_now;
 
 	nsec = cyc2ns(clock, cycle_delta);
+
+	/* If arch requires, add in gettimeoffset() */
+	nsec += arch_gettimeoffset();
+
 	timespec_add_ns(&xtime, nsec);
 
 	nsec = ((s64)cycle_delta * clock->mult_orig) >> clock->shift;
@@ -111,6 +115,9 @@ void getnstimeofday(struct timespec *ts)
 		/* convert to nanoseconds: */
 		nsecs = cyc2ns(clock, cycle_delta);
 
+		/* If arch requires, add in gettimeoffset() */
+		nsecs += arch_gettimeoffset();
+
 	} while (read_seqretry(&xtime_lock, seq));
 
 	timespec_add_ns(ts, nsecs);
diff --git a/kernel/timer.c b/kernel/timer.c
index cffffad01c3..faf2db897de 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/tick.h>
 #include <linux/kallsyms.h>
+#include <linux/perf_counter.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -756,6 +757,7 @@ void add_timer_on(struct timer_list *timer, int cpu)
 	wake_up_idle_cpu(cpu);
 	spin_unlock_irqrestore(&base->lock, flags);
 }
+EXPORT_SYMBOL_GPL(add_timer_on);
 
 /**
  * del_timer - deactive a timer.
@@ -1123,53 +1125,14 @@ void update_process_times(int user_tick)
 }
 
 /*
- * Nr of active tasks - counted in fixed-point numbers
- */
-static unsigned long count_active_tasks(void)
-{
-	return nr_active() * FIXED_1;
-}
-
-/*
- * Hmm.. Changed this, as the GNU make sources (load.c) seems to
- * imply that avenrun[] is the standard name for this kind of thing.
- * Nothing else seems to be standardized: the fractional size etc
- * all seem to differ on different machines.
- *
- * Requires xtime_lock to access.
- */
-unsigned long avenrun[3];
-
-EXPORT_SYMBOL(avenrun);
-
-/*
- * calc_load - given tick count, update the avenrun load estimates.
- * This is called while holding a write_lock on xtime_lock.
- */
-static inline void calc_load(unsigned long ticks)
-{
-	unsigned long active_tasks; /* fixed-point */
-	static int count = LOAD_FREQ;
-
-	count -= ticks;
-	if (unlikely(count < 0)) {
-		active_tasks = count_active_tasks();
-		do {
-			CALC_LOAD(avenrun[0], EXP_1, active_tasks);
-			CALC_LOAD(avenrun[1], EXP_5, active_tasks);
-			CALC_LOAD(avenrun[2], EXP_15, active_tasks);
-			count += LOAD_FREQ;
-		} while (count < 0);
-	}
-}
-
-/*
  * This function runs timers and the timer-tq in bottom half context.
  */
 static void run_timer_softirq(struct softirq_action *h)
 {
 	struct tvec_base *base = __get_cpu_var(tvec_bases);
 
+	perf_counter_do_pending();
+
 	hrtimer_run_pending();
 
 	if (time_after_eq(jiffies, base->timer_jiffies))
@@ -1187,16 +1150,6 @@ void run_local_timers(void)
 }
 
 /*
- * Called by the timer interrupt. xtime_lock must already be taken
- * by the timer IRQ!
- */
-static inline void update_times(unsigned long ticks)
-{
-	update_wall_time();
-	calc_load(ticks);
-}
-
-/*
  * The 64-bit jiffies value is not atomic - you MUST NOT read it
  * without sampling the sequence number in xtime_lock.
  * jiffies is defined in the linker script...
@@ -1205,7 +1158,8 @@ static inline void update_times(unsigned long ticks)
 void do_timer(unsigned long ticks)
 {
 	jiffies_64 += ticks;
-	update_times(ticks);
+	update_wall_time();
+	calc_global_load();
 }
 
 #ifdef __ARCH_WANT_SYS_ALARM
@@ -1406,37 +1360,17 @@ int do_sysinfo(struct sysinfo *info)
 {
 	unsigned long mem_total, sav_total;
 	unsigned int mem_unit, bitcount;
-	unsigned long seq;
+	struct timespec tp;
 
 	memset(info, 0, sizeof(struct sysinfo));
 
-	do {
-		struct timespec tp;
-		seq = read_seqbegin(&xtime_lock);
-
-		/*
-		 * This is annoying.  The below is the same thing
-		 * posix_get_clock_monotonic() does, but it wants to
-		 * take the lock which we want to cover the loads stuff
-		 * too.
-		 */
-
-		getnstimeofday(&tp);
-		tp.tv_sec += wall_to_monotonic.tv_sec;
-		tp.tv_nsec += wall_to_monotonic.tv_nsec;
-		monotonic_to_bootbased(&tp);
-		if (tp.tv_nsec - NSEC_PER_SEC >= 0) {
-			tp.tv_nsec = tp.tv_nsec - NSEC_PER_SEC;
-			tp.tv_sec++;
-		}
-		info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
+	ktime_get_ts(&tp);
+	monotonic_to_bootbased(&tp);
+	info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
 
-		info->loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT);
-		info->loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT);
-		info->loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT);
+	get_avenrun(info->loads, 0, SI_LOAD_SHIFT - FSHIFT);
 
-		info->procs = nr_threads;
-	} while (read_seqretry(&xtime_lock, seq));
+	info->procs = nr_threads;
 
 	si_meminfo(info);
 	si_swapinfo(info);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 417d1985e29..4a13e5a01ce 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -48,6 +48,21 @@ config FTRACE_NMI_ENTER
        depends on HAVE_FTRACE_NMI_ENTER
        default y
 
+config EVENT_TRACING
+	select CONTEXT_SWITCH_TRACER
+	bool
+
+config CONTEXT_SWITCH_TRACER
+	select MARKERS
+	bool
+
+# All tracer options should select GENERIC_TRACER. For those options that are
+# enabled by all tracers (context switch and event tracer) they select TRACING.
+# This allows those options to appear when no other tracer is selected. But the
+# options do not appear when something else selects it. We need the two options
+# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
+# hidding of the automatic options options.
+
 config TRACING
 	bool
 	select DEBUG_FS
@@ -56,6 +71,11 @@ config TRACING
 	select TRACEPOINTS
 	select NOP_TRACER
 	select BINARY_PRINTF
+	select EVENT_TRACING
+
+config GENERIC_TRACER
+	bool
+	select TRACING
 
 #
 # Minimum requirements an architecture has to meet for us to
@@ -73,14 +93,20 @@ config TRACING_SUPPORT
 
 if TRACING_SUPPORT
 
-menu "Tracers"
+menuconfig FTRACE
+	bool "Tracers"
+	default y if DEBUG_KERNEL
+	help
+	 Enable the kernel tracing infrastructure.
+
+if FTRACE
 
 config FUNCTION_TRACER
 	bool "Kernel Function Tracer"
 	depends on HAVE_FUNCTION_TRACER
 	select FRAME_POINTER
 	select KALLSYMS
-	select TRACING
+	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
 	help
 	  Enable the kernel to trace every kernel function. This is done
@@ -104,13 +130,14 @@ config FUNCTION_GRAPH_TRACER
 	  the return value. This is done by setting the current return 
 	  address on the current task structure into a stack of calls.
 
+
 config IRQSOFF_TRACER
 	bool "Interrupts-off Latency Tracer"
 	default n
 	depends on TRACE_IRQFLAGS_SUPPORT
 	depends on GENERIC_TIME
 	select TRACE_IRQFLAGS
-	select TRACING
+	select GENERIC_TRACER
 	select TRACER_MAX_TRACE
 	help
 	  This option measures the time spent in irqs-off critical
@@ -131,7 +158,7 @@ config PREEMPT_TRACER
 	default n
 	depends on GENERIC_TIME
 	depends on PREEMPT
-	select TRACING
+	select GENERIC_TRACER
 	select TRACER_MAX_TRACE
 	help
 	  This option measures the time spent in preemption off critical
@@ -150,7 +177,7 @@ config PREEMPT_TRACER
 config SYSPROF_TRACER
 	bool "Sysprof Tracer"
 	depends on X86
-	select TRACING
+	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
 	help
 	  This tracer provides the trace needed by the 'Sysprof' userspace
@@ -158,40 +185,33 @@ config SYSPROF_TRACER
 
 config SCHED_TRACER
 	bool "Scheduling Latency Tracer"
-	select TRACING
+	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
 	select TRACER_MAX_TRACE
 	help
 	  This tracer tracks the latency of the highest priority task
 	  to be scheduled in, starting from the point it has woken up.
 
-config CONTEXT_SWITCH_TRACER
-	bool "Trace process context switches"
-	select TRACING
-	select MARKERS
-	help
-	  This tracer gets called from the context switch and records
-	  all switching of tasks.
-
-config EVENT_TRACER
-	bool "Trace various events in the kernel"
+config ENABLE_DEFAULT_TRACERS
+	bool "Trace process context switches and events"
+	depends on !GENERIC_TRACER
 	select TRACING
 	help
 	  This tracer hooks to various trace points in the kernel
 	  allowing the user to pick and choose which trace point they
-	  want to trace.
+	  want to trace. It also includes the sched_switch tracer plugin.
 
 config FTRACE_SYSCALLS
 	bool "Trace syscalls"
 	depends on HAVE_FTRACE_SYSCALLS
-	select TRACING
+	select GENERIC_TRACER
 	select KALLSYMS
 	help
 	  Basic tracer to catch the syscall entry and exit events.
 
 config BOOT_TRACER
 	bool "Trace boot initcalls"
-	select TRACING
+	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
 	help
 	  This tracer helps developers to optimize boot times: it records
@@ -207,8 +227,36 @@ config BOOT_TRACER
 	  to enable this on bootup.
 
 config TRACE_BRANCH_PROFILING
+	bool
+	select GENERIC_TRACER
+
+choice
+	prompt "Branch Profiling"
+	default BRANCH_PROFILE_NONE
+	help
+	 The branch profiling is a software profiler. It will add hooks
+	 into the C conditionals to test which path a branch takes.
+
+	 The likely/unlikely profiler only looks at the conditions that
+	 are annotated with a likely or unlikely macro.
+
+	 The "all branch" profiler will profile every if statement in the
+	 kernel. This profiler will also enable the likely/unlikely
+	 profiler as well.
+
+	 Either of the above profilers add a bit of overhead to the system.
+	 If unsure choose "No branch profiling".
+
+config BRANCH_PROFILE_NONE
+	bool "No branch profiling"
+	help
+	 No branch profiling. Branch profiling adds a bit of overhead.
+	 Only enable it if you want to analyse the branching behavior.
+	 Otherwise keep it disabled.
+
+config PROFILE_ANNOTATED_BRANCHES
 	bool "Trace likely/unlikely profiler"
-	select TRACING
+	select TRACE_BRANCH_PROFILING
 	help
 	  This tracer profiles all the the likely and unlikely macros
 	  in the kernel. It will display the results in:
@@ -218,11 +266,9 @@ config TRACE_BRANCH_PROFILING
 	  Note: this will add a significant overhead, only turn this
 	  on if you need to profile the system's use of these macros.
 
-	  Say N if unsure.
-
 config PROFILE_ALL_BRANCHES
 	bool "Profile all if conditionals"
-	depends on TRACE_BRANCH_PROFILING
+	select TRACE_BRANCH_PROFILING
 	help
 	  This tracer profiles all branch conditions. Every if ()
 	  taken in the kernel is recorded whether it hit or miss.
@@ -230,11 +276,12 @@ config PROFILE_ALL_BRANCHES
 
 	  /debugfs/tracing/profile_branch
 
+	  This option also enables the likely/unlikely profiler.
+
 	  This configuration, when enabled, will impose a great overhead
 	  on the system. This should only be enabled when the system
 	  is to be analyzed
-
-	  Say N if unsure.
+endchoice
 
 config TRACING_BRANCHES
 	bool
@@ -261,7 +308,7 @@ config BRANCH_TRACER
 config POWER_TRACER
 	bool "Trace power consumption behavior"
 	depends on X86
-	select TRACING
+	select GENERIC_TRACER
 	help
 	  This tracer helps developers to analyze and optimize the kernels
 	  power management decisions, specifically the C-state and P-state
@@ -295,14 +342,14 @@ config STACK_TRACER
 config HW_BRANCH_TRACER
 	depends on HAVE_HW_BRANCH_TRACER
 	bool "Trace hw branches"
-	select TRACING
+	select GENERIC_TRACER
 	help
 	  This tracer records all branches on the system in a circular
 	  buffer giving access to the last N branches for each cpu.
 
 config KMEMTRACE
 	bool "Trace SLAB allocations"
-	select TRACING
+	select GENERIC_TRACER
 	help
 	  kmemtrace provides tracing for slab allocator functions, such as
 	  kmalloc, kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected
@@ -322,7 +369,7 @@ config KMEMTRACE
 
 config WORKQUEUE_TRACER
 	bool "Trace workqueues"
-	select TRACING
+	select GENERIC_TRACER
 	help
 	  The workqueue tracer provides some statistical informations
           about each cpu workqueue thread such as the number of the
@@ -338,7 +385,7 @@ config BLK_DEV_IO_TRACE
 	select RELAY
 	select DEBUG_FS
 	select TRACEPOINTS
-	select TRACING
+	select GENERIC_TRACER
 	select STACKTRACE
 	help
 	  Say Y here if you want to be able to trace the block layer actions
@@ -375,6 +422,20 @@ config DYNAMIC_FTRACE
 	 were made. If so, it runs stop_machine (stops all CPUS)
 	 and modifies the code to jump over the call to ftrace.
 
+config FUNCTION_PROFILER
+	bool "Kernel function profiler"
+	depends on FUNCTION_TRACER
+	default n
+	help
+	 This option enables the kernel function profiler. A file is created
+	 in debugfs called function_profile_enabled which defaults to zero.
+	 When a 1 is echoed into this file profiling begins, and when a
+	 zero is entered, profiling stops. A file in the trace_stats
+	 directory called functions, that show the list of functions that
+	 have been hit and their counters.
+
+	 If in doubt, say N
+
 config FTRACE_MCOUNT_RECORD
 	def_bool y
 	depends on DYNAMIC_FTRACE
@@ -385,7 +446,7 @@ config FTRACE_SELFTEST
 
 config FTRACE_STARTUP_TEST
 	bool "Perform a startup test on ftrace"
-	depends on TRACING
+	depends on GENERIC_TRACER
 	select FTRACE_SELFTEST
 	help
 	  This option performs a series of startup tests on ftrace. On bootup
@@ -396,7 +457,7 @@ config FTRACE_STARTUP_TEST
 config MMIOTRACE
 	bool "Memory mapped IO tracing"
 	depends on HAVE_MMIOTRACE_SUPPORT && PCI
-	select TRACING
+	select GENERIC_TRACER
 	help
 	  Mmiotrace traces Memory Mapped I/O access and is meant for
 	  debugging and reverse engineering. It is called from the ioremap
@@ -416,7 +477,23 @@ config MMIOTRACE_TEST
 
 	  Say N, unless you absolutely know what you are doing.
 
-endmenu
+config RING_BUFFER_BENCHMARK
+	tristate "Ring buffer benchmark stress tester"
+	depends on RING_BUFFER
+	help
+	  This option creates a test to stress the ring buffer and bench mark it.
+	  It creates its own ring buffer such that it will not interfer with
+	  any other users of the ring buffer (such as ftrace). It then creates
+	  a producer and consumer that will run for 10 seconds and sleep for
+	  10 seconds. Each interval it will print out the number of events
+	  it recorded and give a rough estimate of how long each iteration took.
+
+	  It does not disable interrupts or raise its priority, so it may be
+	  affected by processes that are running.
+
+	  If unsure, say N
+
+endif # FTRACE
 
 endif # TRACING_SUPPORT
 
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index 2630f5121ec..844164dca90 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -15,11 +15,17 @@ ifdef CONFIG_TRACING_BRANCHES
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 endif
 
+#
+# Make the trace clocks available generally: it's infrastructure
+# relied on by ptrace for example:
+#
+obj-y += trace_clock.o
+
 obj-$(CONFIG_FUNCTION_TRACER) += libftrace.o
 obj-$(CONFIG_RING_BUFFER) += ring_buffer.o
+obj-$(CONFIG_RING_BUFFER_BENCHMARK) += ring_buffer_benchmark.o
 
 obj-$(CONFIG_TRACING) += trace.o
-obj-$(CONFIG_TRACING) += trace_clock.o
 obj-$(CONFIG_TRACING) += trace_output.o
 obj-$(CONFIG_TRACING) += trace_stat.o
 obj-$(CONFIG_TRACING) += trace_printk.o
@@ -39,12 +45,14 @@ obj-$(CONFIG_HW_BRANCH_TRACER) += trace_hw_branches.o
 obj-$(CONFIG_POWER_TRACER) += trace_power.o
 obj-$(CONFIG_KMEMTRACE) += kmemtrace.o
 obj-$(CONFIG_WORKQUEUE_TRACER) += trace_workqueue.o
-obj-$(CONFIG_BLK_DEV_IO_TRACE)	+= blktrace.o
-obj-$(CONFIG_EVENT_TRACER) += trace_events.o
-obj-$(CONFIG_EVENT_TRACER) += events.o
-obj-$(CONFIG_EVENT_TRACER) += trace_export.o
+obj-$(CONFIG_BLK_DEV_IO_TRACE) += blktrace.o
+ifeq ($(CONFIG_BLOCK),y)
+obj-$(CONFIG_EVENT_TRACING) += blktrace.o
+endif
+obj-$(CONFIG_EVENT_TRACING) += trace_events.o
+obj-$(CONFIG_EVENT_TRACING) += trace_export.o
 obj-$(CONFIG_FTRACE_SYSCALLS) += trace_syscalls.o
 obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o
-obj-$(CONFIG_EVENT_TRACER) += trace_events_filter.o
+obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
 
 libftrace-y := ftrace.o
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 921ef5d1f0b..39af8af6fc3 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -23,10 +23,14 @@
 #include <linux/mutex.h>
 #include <linux/debugfs.h>
 #include <linux/time.h>
-#include <trace/block.h>
 #include <linux/uaccess.h>
+
+#include <trace/events/block.h>
+
 #include "trace_output.h"
 
+#ifdef CONFIG_BLK_DEV_IO_TRACE
+
 static unsigned int blktrace_seq __read_mostly = 1;
 
 static struct trace_array *blk_tr;
@@ -147,7 +151,7 @@ static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
 {
 	if (((bt->act_mask << BLK_TC_SHIFT) & what) == 0)
 		return 1;
-	if (sector < bt->start_lba || sector > bt->end_lba)
+	if (sector && (sector < bt->start_lba || sector > bt->end_lba))
 		return 1;
 	if (bt->pid && pid != bt->pid)
 		return 1;
@@ -192,7 +196,7 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
 	what |= MASK_TC_BIT(rw, DISCARD);
 
 	pid = tsk->pid;
-	if (unlikely(act_log_check(bt, what, sector, pid)))
+	if (act_log_check(bt, what, sector, pid))
 		return;
 	cpu = raw_smp_processor_id();
 
@@ -262,6 +266,7 @@ static void blk_trace_free(struct blk_trace *bt)
 {
 	debugfs_remove(bt->msg_file);
 	debugfs_remove(bt->dropped_file);
+	debugfs_remove(bt->dir);
 	relay_close(bt->rchan);
 	free_percpu(bt->sequence);
 	free_percpu(bt->msg_data);
@@ -403,11 +408,29 @@ static struct rchan_callbacks blk_relay_callbacks = {
 	.remove_buf_file	= blk_remove_buf_file_callback,
 };
 
+static void blk_trace_setup_lba(struct blk_trace *bt,
+				struct block_device *bdev)
+{
+	struct hd_struct *part = NULL;
+
+	if (bdev)
+		part = bdev->bd_part;
+
+	if (part) {
+		bt->start_lba = part->start_sect;
+		bt->end_lba = part->start_sect + part->nr_sects;
+	} else {
+		bt->start_lba = 0;
+		bt->end_lba = -1ULL;
+	}
+}
+
 /*
  * Setup everything required to start tracing
  */
 int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
-			struct blk_user_trace_setup *buts)
+		       struct block_device *bdev,
+		       struct blk_user_trace_setup *buts)
 {
 	struct blk_trace *old_bt, *bt = NULL;
 	struct dentry *dir = NULL;
@@ -480,10 +503,13 @@ int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 	if (!bt->act_mask)
 		bt->act_mask = (u16) -1;
 
-	bt->start_lba = buts->start_lba;
-	bt->end_lba = buts->end_lba;
-	if (!bt->end_lba)
-		bt->end_lba = -1ULL;
+	blk_trace_setup_lba(bt, bdev);
+
+	/* overwrite with user settings */
+	if (buts->start_lba)
+		bt->start_lba = buts->start_lba;
+	if (buts->end_lba)
+		bt->end_lba = buts->end_lba;
 
 	bt->pid = buts->pid;
 	bt->trace_state = Blktrace_setup;
@@ -505,6 +531,7 @@ err:
 }
 
 int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+		    struct block_device *bdev,
 		    char __user *arg)
 {
 	struct blk_user_trace_setup buts;
@@ -514,7 +541,7 @@ int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 	if (ret)
 		return -EFAULT;
 
-	ret = do_blk_trace_setup(q, name, dev, &buts);
+	ret = do_blk_trace_setup(q, name, dev, bdev, &buts);
 	if (ret)
 		return ret;
 
@@ -582,7 +609,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
 	switch (cmd) {
 	case BLKTRACESETUP:
 		bdevname(bdev, b);
-		ret = blk_trace_setup(q, b, bdev->bd_dev, arg);
+		ret = blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
 		break;
 	case BLKTRACESTART:
 		start = 1;
@@ -642,12 +669,12 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
 
 	if (blk_pc_request(rq)) {
 		what |= BLK_TC_ACT(BLK_TC_PC);
-		__blk_add_trace(bt, 0, rq->data_len, rw, what, rq->errors,
-				rq->cmd_len, rq->cmd);
+		__blk_add_trace(bt, 0, blk_rq_bytes(rq), rw,
+				what, rq->errors, rq->cmd_len, rq->cmd);
 	} else  {
 		what |= BLK_TC_ACT(BLK_TC_FS);
-		__blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9,
-				rw, what, rq->errors, 0, NULL);
+		__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), rw,
+				what, rq->errors, 0, NULL);
 	}
 }
 
@@ -809,7 +836,6 @@ static void blk_add_trace_split(struct request_queue *q, struct bio *bio,
  * @bio:	the source bio
  * @dev:	target device
  * @from:	source sector
- * @to:		target sector
  *
  * Description:
  *     Device mapper or raid target sometimes need to split a bio because
@@ -817,7 +843,7 @@ static void blk_add_trace_split(struct request_queue *q, struct bio *bio,
  *
  **/
 static void blk_add_trace_remap(struct request_queue *q, struct bio *bio,
-				       dev_t dev, sector_t from, sector_t to)
+				       dev_t dev, sector_t from)
 {
 	struct blk_trace *bt = q->blk_trace;
 	struct blk_io_trace_remap r;
@@ -825,12 +851,13 @@ static void blk_add_trace_remap(struct request_queue *q, struct bio *bio,
 	if (likely(!bt))
 		return;
 
-	r.device = cpu_to_be32(dev);
-	r.device_from = cpu_to_be32(bio->bi_bdev->bd_dev);
-	r.sector = cpu_to_be64(to);
+	r.device_from = cpu_to_be32(dev);
+	r.device_to   = cpu_to_be32(bio->bi_bdev->bd_dev);
+	r.sector_from = cpu_to_be64(from);
 
-	__blk_add_trace(bt, from, bio->bi_size, bio->bi_rw, BLK_TA_REMAP,
-			!bio_flagged(bio, BIO_UPTODATE), sizeof(r), &r);
+	__blk_add_trace(bt, bio->bi_sector, bio->bi_size, bio->bi_rw,
+			BLK_TA_REMAP, !bio_flagged(bio, BIO_UPTODATE),
+			sizeof(r), &r);
 }
 
 /**
@@ -854,11 +881,11 @@ void blk_add_driver_data(struct request_queue *q,
 		return;
 
 	if (blk_pc_request(rq))
-		__blk_add_trace(bt, 0, rq->data_len, 0, BLK_TA_DRV_DATA,
-				rq->errors, len, data);
+		__blk_add_trace(bt, 0, blk_rq_bytes(rq), 0,
+				BLK_TA_DRV_DATA, rq->errors, len, data);
 	else
-		__blk_add_trace(bt, rq->hard_sector, rq->hard_nr_sectors << 9,
-				0, BLK_TA_DRV_DATA, rq->errors, len, data);
+		__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), 0,
+				BLK_TA_DRV_DATA, rq->errors, len, data);
 }
 EXPORT_SYMBOL_GPL(blk_add_driver_data);
 
@@ -971,6 +998,16 @@ static inline const void *pdu_start(const struct trace_entry *ent)
 	return te_blk_io_trace(ent) + 1;
 }
 
+static inline u32 t_action(const struct trace_entry *ent)
+{
+	return te_blk_io_trace(ent)->action;
+}
+
+static inline u32 t_bytes(const struct trace_entry *ent)
+{
+	return te_blk_io_trace(ent)->bytes;
+}
+
 static inline u32 t_sec(const struct trace_entry *ent)
 {
 	return te_blk_io_trace(ent)->bytes >> 9;
@@ -996,11 +1033,11 @@ static void get_pdu_remap(const struct trace_entry *ent,
 			  struct blk_io_trace_remap *r)
 {
 	const struct blk_io_trace_remap *__r = pdu_start(ent);
-	__u64 sector = __r->sector;
+	__u64 sector_from = __r->sector_from;
 
-	r->device = be32_to_cpu(__r->device);
 	r->device_from = be32_to_cpu(__r->device_from);
-	r->sector = be64_to_cpu(sector);
+	r->device_to   = be32_to_cpu(__r->device_to);
+	r->sector_from = be64_to_cpu(sector_from);
 }
 
 typedef int (blk_log_action_t) (struct trace_iterator *iter, const char *act);
@@ -1031,36 +1068,98 @@ static int blk_log_action(struct trace_iterator *iter, const char *act)
 				MAJOR(t->device), MINOR(t->device), act, rwbs);
 }
 
+static int blk_log_dump_pdu(struct trace_seq *s, const struct trace_entry *ent)
+{
+	const unsigned char *pdu_buf;
+	int pdu_len;
+	int i, end, ret;
+
+	pdu_buf = pdu_start(ent);
+	pdu_len = te_blk_io_trace(ent)->pdu_len;
+
+	if (!pdu_len)
+		return 1;
+
+	/* find the last zero that needs to be printed */
+	for (end = pdu_len - 1; end >= 0; end--)
+		if (pdu_buf[end])
+			break;
+	end++;
+
+	if (!trace_seq_putc(s, '('))
+		return 0;
+
+	for (i = 0; i < pdu_len; i++) {
+
+		ret = trace_seq_printf(s, "%s%02x",
+				       i == 0 ? "" : " ", pdu_buf[i]);
+		if (!ret)
+			return ret;
+
+		/*
+		 * stop when the rest is just zeroes and indicate so
+		 * with a ".." appended
+		 */
+		if (i == end && end != pdu_len - 1)
+			return trace_seq_puts(s, " ..) ");
+	}
+
+	return trace_seq_puts(s, ") ");
+}
+
 static int blk_log_generic(struct trace_seq *s, const struct trace_entry *ent)
 {
 	char cmd[TASK_COMM_LEN];
 
 	trace_find_cmdline(ent->pid, cmd);
 
-	if (t_sec(ent))
-		return trace_seq_printf(s, "%llu + %u [%s]\n",
-					t_sector(ent), t_sec(ent), cmd);
-	return trace_seq_printf(s, "[%s]\n", cmd);
+	if (t_action(ent) & BLK_TC_ACT(BLK_TC_PC)) {
+		int ret;
+
+		ret = trace_seq_printf(s, "%u ", t_bytes(ent));
+		if (!ret)
+			return 0;
+		ret = blk_log_dump_pdu(s, ent);
+		if (!ret)
+			return 0;
+		return trace_seq_printf(s, "[%s]\n", cmd);
+	} else {
+		if (t_sec(ent))
+			return trace_seq_printf(s, "%llu + %u [%s]\n",
+						t_sector(ent), t_sec(ent), cmd);
+		return trace_seq_printf(s, "[%s]\n", cmd);
+	}
 }
 
 static int blk_log_with_error(struct trace_seq *s,
 			      const struct trace_entry *ent)
 {
-	if (t_sec(ent))
-		return trace_seq_printf(s, "%llu + %u [%d]\n", t_sector(ent),
-					t_sec(ent), t_error(ent));
-	return trace_seq_printf(s, "%llu [%d]\n", t_sector(ent), t_error(ent));
+	if (t_action(ent) & BLK_TC_ACT(BLK_TC_PC)) {
+		int ret;
+
+		ret = blk_log_dump_pdu(s, ent);
+		if (ret)
+			return trace_seq_printf(s, "[%d]\n", t_error(ent));
+		return 0;
+	} else {
+		if (t_sec(ent))
+			return trace_seq_printf(s, "%llu + %u [%d]\n",
+						t_sector(ent),
+						t_sec(ent), t_error(ent));
+		return trace_seq_printf(s, "%llu [%d]\n",
+					t_sector(ent), t_error(ent));
+	}
 }
 
 static int blk_log_remap(struct trace_seq *s, const struct trace_entry *ent)
 {
-	struct blk_io_trace_remap r = { .device = 0, };
+	struct blk_io_trace_remap r = { .device_from = 0, };
 
 	get_pdu_remap(ent, &r);
 	return trace_seq_printf(s, "%llu + %u <- (%d,%d) %llu\n",
-			       t_sector(ent),
-			       t_sec(ent), MAJOR(r.device), MINOR(r.device),
-			       (unsigned long long)r.sector);
+				t_sector(ent), t_sec(ent),
+				MAJOR(r.device_from), MINOR(r.device_from),
+				(unsigned long long)r.sector_from);
 }
 
 static int blk_log_plug(struct trace_seq *s, const struct trace_entry *ent)
@@ -1117,7 +1216,6 @@ static void blk_tracer_print_header(struct seq_file *m)
 static void blk_tracer_start(struct trace_array *tr)
 {
 	blk_tracer_enabled = true;
-	trace_flags &= ~TRACE_ITER_CONTEXT_INFO;
 }
 
 static int blk_tracer_init(struct trace_array *tr)
@@ -1130,7 +1228,6 @@ static int blk_tracer_init(struct trace_array *tr)
 static void blk_tracer_stop(struct trace_array *tr)
 {
 	blk_tracer_enabled = false;
-	trace_flags |= TRACE_ITER_CONTEXT_INFO;
 }
 
 static void blk_tracer_reset(struct trace_array *tr)
@@ -1182,7 +1279,7 @@ static enum print_line_t print_one_line(struct trace_iterator *iter,
 	}
 
 	if (unlikely(what == 0 || what >= ARRAY_SIZE(what2act)))
-		ret = trace_seq_printf(s, "Bad pc action %x\n", what);
+		ret = trace_seq_printf(s, "Unknown action %x\n", what);
 	else {
 		ret = log_action(iter, what2act[what].act[long_act]);
 		if (ret)
@@ -1195,9 +1292,6 @@ out:
 static enum print_line_t blk_trace_event_print(struct trace_iterator *iter,
 					       int flags)
 {
-	if (!trace_print_context(iter))
-		return TRACE_TYPE_PARTIAL_LINE;
-
 	return print_one_line(iter, false);
 }
 
@@ -1232,6 +1326,18 @@ static enum print_line_t blk_tracer_print_line(struct trace_iterator *iter)
 	return print_one_line(iter, true);
 }
 
+static int blk_tracer_set_flag(u32 old_flags, u32 bit, int set)
+{
+	/* don't output context-info for blk_classic output */
+	if (bit == TRACE_BLK_OPT_CLASSIC) {
+		if (set)
+			trace_flags &= ~TRACE_ITER_CONTEXT_INFO;
+		else
+			trace_flags |= TRACE_ITER_CONTEXT_INFO;
+	}
+	return 0;
+}
+
 static struct tracer blk_tracer __read_mostly = {
 	.name		= "blk",
 	.init		= blk_tracer_init,
@@ -1241,6 +1347,7 @@ static struct tracer blk_tracer __read_mostly = {
 	.print_header	= blk_tracer_print_header,
 	.print_line	= blk_tracer_print_line,
 	.flags		= &blk_tracer_flags,
+	.set_flag	= blk_tracer_set_flag,
 };
 
 static struct trace_event trace_blk_event = {
@@ -1285,7 +1392,8 @@ static int blk_trace_remove_queue(struct request_queue *q)
 /*
  * Setup everything required to start tracing
  */
-static int blk_trace_setup_queue(struct request_queue *q, dev_t dev)
+static int blk_trace_setup_queue(struct request_queue *q,
+				 struct block_device *bdev)
 {
 	struct blk_trace *old_bt, *bt = NULL;
 	int ret = -ENOMEM;
@@ -1298,9 +1406,10 @@ static int blk_trace_setup_queue(struct request_queue *q, dev_t dev)
 	if (!bt->msg_data)
 		goto free_bt;
 
-	bt->dev = dev;
+	bt->dev = bdev->bd_dev;
 	bt->act_mask = (u16)-1;
-	bt->end_lba = -1ULL;
+
+	blk_trace_setup_lba(bt, bdev);
 
 	old_bt = xchg(&q->blk_trace, bt);
 	if (old_bt != NULL) {
@@ -1517,7 +1626,7 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
 
 	if (attr == &dev_attr_enable) {
 		if (value)
-			ret = blk_trace_setup_queue(q, bdev->bd_dev);
+			ret = blk_trace_setup_queue(q, bdev);
 		else
 			ret = blk_trace_remove_queue(q);
 		goto out_unlock_bdev;
@@ -1525,7 +1634,7 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
 
 	ret = 0;
 	if (q->blk_trace == NULL)
-		ret = blk_trace_setup_queue(q, bdev->bd_dev);
+		ret = blk_trace_setup_queue(q, bdev);
 
 	if (ret == 0) {
 		if (attr == &dev_attr_act_mask)
@@ -1548,3 +1657,77 @@ out:
 	return ret ? ret : count;
 }
 
+int blk_trace_init_sysfs(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &blk_trace_attr_group);
+}
+
+#endif /* CONFIG_BLK_DEV_IO_TRACE */
+
+#ifdef CONFIG_EVENT_TRACING
+
+void blk_dump_cmd(char *buf, struct request *rq)
+{
+	int i, end;
+	int len = rq->cmd_len;
+	unsigned char *cmd = rq->cmd;
+
+	if (!blk_pc_request(rq)) {
+		buf[0] = '\0';
+		return;
+	}
+
+	for (end = len - 1; end >= 0; end--)
+		if (cmd[end])
+			break;
+	end++;
+
+	for (i = 0; i < len; i++) {
+		buf += sprintf(buf, "%s%02x", i == 0 ? "" : " ", cmd[i]);
+		if (i == end && end != len - 1) {
+			sprintf(buf, " ..");
+			break;
+		}
+	}
+}
+
+void blk_fill_rwbs(char *rwbs, u32 rw, int bytes)
+{
+	int i = 0;
+
+	if (rw & WRITE)
+		rwbs[i++] = 'W';
+	else if (rw & 1 << BIO_RW_DISCARD)
+		rwbs[i++] = 'D';
+	else if (bytes)
+		rwbs[i++] = 'R';
+	else
+		rwbs[i++] = 'N';
+
+	if (rw & 1 << BIO_RW_AHEAD)
+		rwbs[i++] = 'A';
+	if (rw & 1 << BIO_RW_BARRIER)
+		rwbs[i++] = 'B';
+	if (rw & 1 << BIO_RW_SYNCIO)
+		rwbs[i++] = 'S';
+	if (rw & 1 << BIO_RW_META)
+		rwbs[i++] = 'M';
+
+	rwbs[i] = '\0';
+}
+
+void blk_fill_rwbs_rq(char *rwbs, struct request *rq)
+{
+	int rw = rq->cmd_flags & 0x03;
+	int bytes;
+
+	if (blk_discard_rq(rq))
+		rw |= (1 << BIO_RW_DISCARD);
+
+	bytes = blk_rq_bytes(rq);
+
+	blk_fill_rwbs(rwbs, rw, bytes);
+}
+
+#endif /* CONFIG_EVENT_TRACING */
+
diff --git a/kernel/trace/events.c b/kernel/trace/events.c
deleted file mode 100644
index 246f2aa6dc4..00000000000
--- a/kernel/trace/events.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * This is the place to register all trace points as events.
- */
-
-#include <linux/stringify.h>
-
-#include <trace/trace_events.h>
-
-#include "trace_output.h"
-
-#include "trace_events_stage_1.h"
-#include "trace_events_stage_2.h"
-#include "trace_events_stage_3.h"
-
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index f1ed080406c..bb60732ade0 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -29,11 +29,13 @@
 #include <linux/list.h>
 #include <linux/hash.h>
 
-#include <trace/sched.h>
+#include <trace/events/sched.h>
 
 #include <asm/ftrace.h>
+#include <asm/setup.h>
 
-#include "trace.h"
+#include "trace_output.h"
+#include "trace_stat.h"
 
 #define FTRACE_WARN_ON(cond)			\
 	do {					\
@@ -68,7 +70,7 @@ static DEFINE_MUTEX(ftrace_lock);
 
 static struct ftrace_ops ftrace_list_end __read_mostly =
 {
-	.func = ftrace_stub,
+	.func		= ftrace_stub,
 };
 
 static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end;
@@ -240,6 +242,580 @@ static void ftrace_update_pid_func(void)
 #endif
 }
 
+#ifdef CONFIG_FUNCTION_PROFILER
+struct ftrace_profile {
+	struct hlist_node		node;
+	unsigned long			ip;
+	unsigned long			counter;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	unsigned long long		time;
+#endif
+};
+
+struct ftrace_profile_page {
+	struct ftrace_profile_page	*next;
+	unsigned long			index;
+	struct ftrace_profile		records[];
+};
+
+struct ftrace_profile_stat {
+	atomic_t			disabled;
+	struct hlist_head		*hash;
+	struct ftrace_profile_page	*pages;
+	struct ftrace_profile_page	*start;
+	struct tracer_stat		stat;
+};
+
+#define PROFILE_RECORDS_SIZE						\
+	(PAGE_SIZE - offsetof(struct ftrace_profile_page, records))
+
+#define PROFILES_PER_PAGE					\
+	(PROFILE_RECORDS_SIZE / sizeof(struct ftrace_profile))
+
+static int ftrace_profile_bits __read_mostly;
+static int ftrace_profile_enabled __read_mostly;
+
+/* ftrace_profile_lock - synchronize the enable and disable of the profiler */
+static DEFINE_MUTEX(ftrace_profile_lock);
+
+static DEFINE_PER_CPU(struct ftrace_profile_stat, ftrace_profile_stats);
+
+#define FTRACE_PROFILE_HASH_SIZE 1024 /* must be power of 2 */
+
+static void *
+function_stat_next(void *v, int idx)
+{
+	struct ftrace_profile *rec = v;
+	struct ftrace_profile_page *pg;
+
+	pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK);
+
+ again:
+	rec++;
+	if ((void *)rec >= (void *)&pg->records[pg->index]) {
+		pg = pg->next;
+		if (!pg)
+			return NULL;
+		rec = &pg->records[0];
+		if (!rec->counter)
+			goto again;
+	}
+
+	return rec;
+}
+
+static void *function_stat_start(struct tracer_stat *trace)
+{
+	struct ftrace_profile_stat *stat =
+		container_of(trace, struct ftrace_profile_stat, stat);
+
+	if (!stat || !stat->start)
+		return NULL;
+
+	return function_stat_next(&stat->start->records[0], 0);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* function graph compares on total time */
+static int function_stat_cmp(void *p1, void *p2)
+{
+	struct ftrace_profile *a = p1;
+	struct ftrace_profile *b = p2;
+
+	if (a->time < b->time)
+		return -1;
+	if (a->time > b->time)
+		return 1;
+	else
+		return 0;
+}
+#else
+/* not function graph compares against hits */
+static int function_stat_cmp(void *p1, void *p2)
+{
+	struct ftrace_profile *a = p1;
+	struct ftrace_profile *b = p2;
+
+	if (a->counter < b->counter)
+		return -1;
+	if (a->counter > b->counter)
+		return 1;
+	else
+		return 0;
+}
+#endif
+
+static int function_stat_headers(struct seq_file *m)
+{
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	seq_printf(m, "  Function                               "
+		   "Hit    Time            Avg\n"
+		      "  --------                               "
+		   "---    ----            ---\n");
+#else
+	seq_printf(m, "  Function                               Hit\n"
+		      "  --------                               ---\n");
+#endif
+	return 0;
+}
+
+static int function_stat_show(struct seq_file *m, void *v)
+{
+	struct ftrace_profile *rec = v;
+	char str[KSYM_SYMBOL_LEN];
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	static DEFINE_MUTEX(mutex);
+	static struct trace_seq s;
+	unsigned long long avg;
+#endif
+
+	kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
+	seq_printf(m, "  %-30.30s  %10lu", str, rec->counter);
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	seq_printf(m, "    ");
+	avg = rec->time;
+	do_div(avg, rec->counter);
+
+	mutex_lock(&mutex);
+	trace_seq_init(&s);
+	trace_print_graph_duration(rec->time, &s);
+	trace_seq_puts(&s, "    ");
+	trace_print_graph_duration(avg, &s);
+	trace_print_seq(m, &s);
+	mutex_unlock(&mutex);
+#endif
+	seq_putc(m, '\n');
+
+	return 0;
+}
+
+static void ftrace_profile_reset(struct ftrace_profile_stat *stat)
+{
+	struct ftrace_profile_page *pg;
+
+	pg = stat->pages = stat->start;
+
+	while (pg) {
+		memset(pg->records, 0, PROFILE_RECORDS_SIZE);
+		pg->index = 0;
+		pg = pg->next;
+	}
+
+	memset(stat->hash, 0,
+	       FTRACE_PROFILE_HASH_SIZE * sizeof(struct hlist_head));
+}
+
+int ftrace_profile_pages_init(struct ftrace_profile_stat *stat)
+{
+	struct ftrace_profile_page *pg;
+	int functions;
+	int pages;
+	int i;
+
+	/* If we already allocated, do nothing */
+	if (stat->pages)
+		return 0;
+
+	stat->pages = (void *)get_zeroed_page(GFP_KERNEL);
+	if (!stat->pages)
+		return -ENOMEM;
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+	functions = ftrace_update_tot_cnt;
+#else
+	/*
+	 * We do not know the number of functions that exist because
+	 * dynamic tracing is what counts them. With past experience
+	 * we have around 20K functions. That should be more than enough.
+	 * It is highly unlikely we will execute every function in
+	 * the kernel.
+	 */
+	functions = 20000;
+#endif
+
+	pg = stat->start = stat->pages;
+
+	pages = DIV_ROUND_UP(functions, PROFILES_PER_PAGE);
+
+	for (i = 0; i < pages; i++) {
+		pg->next = (void *)get_zeroed_page(GFP_KERNEL);
+		if (!pg->next)
+			goto out_free;
+		pg = pg->next;
+	}
+
+	return 0;
+
+ out_free:
+	pg = stat->start;
+	while (pg) {
+		unsigned long tmp = (unsigned long)pg;
+
+		pg = pg->next;
+		free_page(tmp);
+	}
+
+	free_page((unsigned long)stat->pages);
+	stat->pages = NULL;
+	stat->start = NULL;
+
+	return -ENOMEM;
+}
+
+static int ftrace_profile_init_cpu(int cpu)
+{
+	struct ftrace_profile_stat *stat;
+	int size;
+
+	stat = &per_cpu(ftrace_profile_stats, cpu);
+
+	if (stat->hash) {
+		/* If the profile is already created, simply reset it */
+		ftrace_profile_reset(stat);
+		return 0;
+	}
+
+	/*
+	 * We are profiling all functions, but usually only a few thousand
+	 * functions are hit. We'll make a hash of 1024 items.
+	 */
+	size = FTRACE_PROFILE_HASH_SIZE;
+
+	stat->hash = kzalloc(sizeof(struct hlist_head) * size, GFP_KERNEL);
+
+	if (!stat->hash)
+		return -ENOMEM;
+
+	if (!ftrace_profile_bits) {
+		size--;
+
+		for (; size; size >>= 1)
+			ftrace_profile_bits++;
+	}
+
+	/* Preallocate the function profiling pages */
+	if (ftrace_profile_pages_init(stat) < 0) {
+		kfree(stat->hash);
+		stat->hash = NULL;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int ftrace_profile_init(void)
+{
+	int cpu;
+	int ret = 0;
+
+	for_each_online_cpu(cpu) {
+		ret = ftrace_profile_init_cpu(cpu);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/* interrupts must be disabled */
+static struct ftrace_profile *
+ftrace_find_profiled_func(struct ftrace_profile_stat *stat, unsigned long ip)
+{
+	struct ftrace_profile *rec;
+	struct hlist_head *hhd;
+	struct hlist_node *n;
+	unsigned long key;
+
+	key = hash_long(ip, ftrace_profile_bits);
+	hhd = &stat->hash[key];
+
+	if (hlist_empty(hhd))
+		return NULL;
+
+	hlist_for_each_entry_rcu(rec, n, hhd, node) {
+		if (rec->ip == ip)
+			return rec;
+	}
+
+	return NULL;
+}
+
+static void ftrace_add_profile(struct ftrace_profile_stat *stat,
+			       struct ftrace_profile *rec)
+{
+	unsigned long key;
+
+	key = hash_long(rec->ip, ftrace_profile_bits);
+	hlist_add_head_rcu(&rec->node, &stat->hash[key]);
+}
+
+/*
+ * The memory is already allocated, this simply finds a new record to use.
+ */
+static struct ftrace_profile *
+ftrace_profile_alloc(struct ftrace_profile_stat *stat, unsigned long ip)
+{
+	struct ftrace_profile *rec = NULL;
+
+	/* prevent recursion (from NMIs) */
+	if (atomic_inc_return(&stat->disabled) != 1)
+		goto out;
+
+	/*
+	 * Try to find the function again since an NMI
+	 * could have added it
+	 */
+	rec = ftrace_find_profiled_func(stat, ip);
+	if (rec)
+		goto out;
+
+	if (stat->pages->index == PROFILES_PER_PAGE) {
+		if (!stat->pages->next)
+			goto out;
+		stat->pages = stat->pages->next;
+	}
+
+	rec = &stat->pages->records[stat->pages->index++];
+	rec->ip = ip;
+	ftrace_add_profile(stat, rec);
+
+ out:
+	atomic_dec(&stat->disabled);
+
+	return rec;
+}
+
+static void
+function_profile_call(unsigned long ip, unsigned long parent_ip)
+{
+	struct ftrace_profile_stat *stat;
+	struct ftrace_profile *rec;
+	unsigned long flags;
+
+	if (!ftrace_profile_enabled)
+		return;
+
+	local_irq_save(flags);
+
+	stat = &__get_cpu_var(ftrace_profile_stats);
+	if (!stat->hash || !ftrace_profile_enabled)
+		goto out;
+
+	rec = ftrace_find_profiled_func(stat, ip);
+	if (!rec) {
+		rec = ftrace_profile_alloc(stat, ip);
+		if (!rec)
+			goto out;
+	}
+
+	rec->counter++;
+ out:
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static int profile_graph_entry(struct ftrace_graph_ent *trace)
+{
+	function_profile_call(trace->func, 0);
+	return 1;
+}
+
+static void profile_graph_return(struct ftrace_graph_ret *trace)
+{
+	struct ftrace_profile_stat *stat;
+	unsigned long long calltime;
+	struct ftrace_profile *rec;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	stat = &__get_cpu_var(ftrace_profile_stats);
+	if (!stat->hash || !ftrace_profile_enabled)
+		goto out;
+
+	calltime = trace->rettime - trace->calltime;
+
+	if (!(trace_flags & TRACE_ITER_GRAPH_TIME)) {
+		int index;
+
+		index = trace->depth;
+
+		/* Append this call time to the parent time to subtract */
+		if (index)
+			current->ret_stack[index - 1].subtime += calltime;
+
+		if (current->ret_stack[index].subtime < calltime)
+			calltime -= current->ret_stack[index].subtime;
+		else
+			calltime = 0;
+	}
+
+	rec = ftrace_find_profiled_func(stat, trace->func);
+	if (rec)
+		rec->time += calltime;
+
+ out:
+	local_irq_restore(flags);
+}
+
+static int register_ftrace_profiler(void)
+{
+	return register_ftrace_graph(&profile_graph_return,
+				     &profile_graph_entry);
+}
+
+static void unregister_ftrace_profiler(void)
+{
+	unregister_ftrace_graph();
+}
+#else
+static struct ftrace_ops ftrace_profile_ops __read_mostly =
+{
+	.func		= function_profile_call,
+};
+
+static int register_ftrace_profiler(void)
+{
+	return register_ftrace_function(&ftrace_profile_ops);
+}
+
+static void unregister_ftrace_profiler(void)
+{
+	unregister_ftrace_function(&ftrace_profile_ops);
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+static ssize_t
+ftrace_profile_write(struct file *filp, const char __user *ubuf,
+		     size_t cnt, loff_t *ppos)
+{
+	unsigned long val;
+	char buf[64];		/* big enough to hold a number */
+	int ret;
+
+	if (cnt >= sizeof(buf))
+		return -EINVAL;
+
+	if (copy_from_user(&buf, ubuf, cnt))
+		return -EFAULT;
+
+	buf[cnt] = 0;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	val = !!val;
+
+	mutex_lock(&ftrace_profile_lock);
+	if (ftrace_profile_enabled ^ val) {
+		if (val) {
+			ret = ftrace_profile_init();
+			if (ret < 0) {
+				cnt = ret;
+				goto out;
+			}
+
+			ret = register_ftrace_profiler();
+			if (ret < 0) {
+				cnt = ret;
+				goto out;
+			}
+			ftrace_profile_enabled = 1;
+		} else {
+			ftrace_profile_enabled = 0;
+			/*
+			 * unregister_ftrace_profiler calls stop_machine
+			 * so this acts like an synchronize_sched.
+			 */
+			unregister_ftrace_profiler();
+		}
+	}
+ out:
+	mutex_unlock(&ftrace_profile_lock);
+
+	filp->f_pos += cnt;
+
+	return cnt;
+}
+
+static ssize_t
+ftrace_profile_read(struct file *filp, char __user *ubuf,
+		     size_t cnt, loff_t *ppos)
+{
+	char buf[64];		/* big enough to hold a number */
+	int r;
+
+	r = sprintf(buf, "%u\n", ftrace_profile_enabled);
+	return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
+}
+
+static const struct file_operations ftrace_profile_fops = {
+	.open		= tracing_open_generic,
+	.read		= ftrace_profile_read,
+	.write		= ftrace_profile_write,
+};
+
+/* used to initialize the real stat files */
+static struct tracer_stat function_stats __initdata = {
+	.name		= "functions",
+	.stat_start	= function_stat_start,
+	.stat_next	= function_stat_next,
+	.stat_cmp	= function_stat_cmp,
+	.stat_headers	= function_stat_headers,
+	.stat_show	= function_stat_show
+};
+
+static void ftrace_profile_debugfs(struct dentry *d_tracer)
+{
+	struct ftrace_profile_stat *stat;
+	struct dentry *entry;
+	char *name;
+	int ret;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		stat = &per_cpu(ftrace_profile_stats, cpu);
+
+		/* allocate enough for function name + cpu number */
+		name = kmalloc(32, GFP_KERNEL);
+		if (!name) {
+			/*
+			 * The files created are permanent, if something happens
+			 * we still do not free memory.
+			 */
+			kfree(stat);
+			WARN(1,
+			     "Could not allocate stat file for cpu %d\n",
+			     cpu);
+			return;
+		}
+		stat->stat = function_stats;
+		snprintf(name, 32, "function%d", cpu);
+		stat->stat.name = name;
+		ret = register_stat_tracer(&stat->stat);
+		if (ret) {
+			WARN(1,
+			     "Could not register function stat for cpu %d\n",
+			     cpu);
+			kfree(name);
+			return;
+		}
+	}
+
+	entry = debugfs_create_file("function_profile_enabled", 0644,
+				    d_tracer, NULL, &ftrace_profile_fops);
+	if (!entry)
+		pr_warning("Could not create debugfs "
+			   "'function_profile_enabled' entry\n");
+}
+
+#else /* CONFIG_FUNCTION_PROFILER */
+static void ftrace_profile_debugfs(struct dentry *d_tracer)
+{
+}
+#endif /* CONFIG_FUNCTION_PROFILER */
+
 /* set when tracing only a pid */
 struct pid *ftrace_pid_trace;
 static struct pid * const ftrace_swapper_pid = &init_struct_pid;
@@ -261,7 +837,6 @@ struct ftrace_func_probe {
 	struct rcu_head		rcu;
 };
 
-
 enum {
 	FTRACE_ENABLE_CALLS		= (1 << 0),
 	FTRACE_DISABLE_CALLS		= (1 << 1),
@@ -346,30 +921,6 @@ static void ftrace_free_rec(struct dyn_ftrace *rec)
 	rec->flags |= FTRACE_FL_FREE;
 }
 
-void ftrace_release(void *start, unsigned long size)
-{
-	struct dyn_ftrace *rec;
-	struct ftrace_page *pg;
-	unsigned long s = (unsigned long)start;
-	unsigned long e = s + size;
-
-	if (ftrace_disabled || !start)
-		return;
-
-	mutex_lock(&ftrace_lock);
-	do_for_each_ftrace_rec(pg, rec) {
-		if ((rec->ip >= s) && (rec->ip < e)) {
-			/*
-			 * rec->ip is changed in ftrace_free_rec()
-			 * It should not between s and e if record was freed.
-			 */
-			FTRACE_WARN_ON(rec->flags & FTRACE_FL_FREE);
-			ftrace_free_rec(rec);
-		}
-	} while_for_each_ftrace_rec();
-	mutex_unlock(&ftrace_lock);
-}
-
 static struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip)
 {
 	struct dyn_ftrace *rec;
@@ -1408,7 +1959,7 @@ function_trace_probe_call(unsigned long ip, unsigned long parent_ip)
 
 static struct ftrace_ops trace_probe_ops __read_mostly =
 {
-	.func = function_trace_probe_call,
+	.func		= function_trace_probe_call,
 };
 
 static int ftrace_probe_registered;
@@ -1823,6 +2374,45 @@ void ftrace_set_notrace(unsigned char *buf, int len, int reset)
 	ftrace_set_regex(buf, len, reset, 0);
 }
 
+/*
+ * command line interface to allow users to set filters on boot up.
+ */
+#define FTRACE_FILTER_SIZE		COMMAND_LINE_SIZE
+static char ftrace_notrace_buf[FTRACE_FILTER_SIZE] __initdata;
+static char ftrace_filter_buf[FTRACE_FILTER_SIZE] __initdata;
+
+static int __init set_ftrace_notrace(char *str)
+{
+	strncpy(ftrace_notrace_buf, str, FTRACE_FILTER_SIZE);
+	return 1;
+}
+__setup("ftrace_notrace=", set_ftrace_notrace);
+
+static int __init set_ftrace_filter(char *str)
+{
+	strncpy(ftrace_filter_buf, str, FTRACE_FILTER_SIZE);
+	return 1;
+}
+__setup("ftrace_filter=", set_ftrace_filter);
+
+static void __init set_ftrace_early_filter(char *buf, int enable)
+{
+	char *func;
+
+	while (buf) {
+		func = strsep(&buf, ",");
+		ftrace_set_regex(func, strlen(func), 0, enable);
+	}
+}
+
+static void __init set_ftrace_early_filters(void)
+{
+	if (ftrace_filter_buf[0])
+		set_ftrace_early_filter(ftrace_filter_buf, 1);
+	if (ftrace_notrace_buf[0])
+		set_ftrace_early_filter(ftrace_notrace_buf, 0);
+}
+
 static int
 ftrace_regex_release(struct inode *inode, struct file *file, int enable)
 {
@@ -2128,38 +2718,23 @@ static const struct file_operations ftrace_graph_fops = {
 
 static __init int ftrace_init_dyn_debugfs(struct dentry *d_tracer)
 {
-	struct dentry *entry;
 
-	entry = debugfs_create_file("available_filter_functions", 0444,
-				    d_tracer, NULL, &ftrace_avail_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'available_filter_functions' entry\n");
+	trace_create_file("available_filter_functions", 0444,
+			d_tracer, NULL, &ftrace_avail_fops);
 
-	entry = debugfs_create_file("failures", 0444,
-				    d_tracer, NULL, &ftrace_failures_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'failures' entry\n");
+	trace_create_file("failures", 0444,
+			d_tracer, NULL, &ftrace_failures_fops);
 
-	entry = debugfs_create_file("set_ftrace_filter", 0644, d_tracer,
-				    NULL, &ftrace_filter_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'set_ftrace_filter' entry\n");
+	trace_create_file("set_ftrace_filter", 0644, d_tracer,
+			NULL, &ftrace_filter_fops);
 
-	entry = debugfs_create_file("set_ftrace_notrace", 0644, d_tracer,
+	trace_create_file("set_ftrace_notrace", 0644, d_tracer,
 				    NULL, &ftrace_notrace_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'set_ftrace_notrace' entry\n");
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	entry = debugfs_create_file("set_graph_function", 0444, d_tracer,
+	trace_create_file("set_graph_function", 0444, d_tracer,
 				    NULL,
 				    &ftrace_graph_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'set_graph_function' entry\n");
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
 	return 0;
@@ -2197,14 +2772,72 @@ static int ftrace_convert_nops(struct module *mod,
 	return 0;
 }
 
-void ftrace_init_module(struct module *mod,
-			unsigned long *start, unsigned long *end)
+#ifdef CONFIG_MODULES
+void ftrace_release(void *start, void *end)
+{
+	struct dyn_ftrace *rec;
+	struct ftrace_page *pg;
+	unsigned long s = (unsigned long)start;
+	unsigned long e = (unsigned long)end;
+
+	if (ftrace_disabled || !start || start == end)
+		return;
+
+	mutex_lock(&ftrace_lock);
+	do_for_each_ftrace_rec(pg, rec) {
+		if ((rec->ip >= s) && (rec->ip < e)) {
+			/*
+			 * rec->ip is changed in ftrace_free_rec()
+			 * It should not between s and e if record was freed.
+			 */
+			FTRACE_WARN_ON(rec->flags & FTRACE_FL_FREE);
+			ftrace_free_rec(rec);
+		}
+	} while_for_each_ftrace_rec();
+	mutex_unlock(&ftrace_lock);
+}
+
+static void ftrace_init_module(struct module *mod,
+			       unsigned long *start, unsigned long *end)
 {
 	if (ftrace_disabled || start == end)
 		return;
 	ftrace_convert_nops(mod, start, end);
 }
 
+static int ftrace_module_notify(struct notifier_block *self,
+				unsigned long val, void *data)
+{
+	struct module *mod = data;
+
+	switch (val) {
+	case MODULE_STATE_COMING:
+		ftrace_init_module(mod, mod->ftrace_callsites,
+				   mod->ftrace_callsites +
+				   mod->num_ftrace_callsites);
+		break;
+	case MODULE_STATE_GOING:
+		ftrace_release(mod->ftrace_callsites,
+			       mod->ftrace_callsites +
+			       mod->num_ftrace_callsites);
+		break;
+	}
+
+	return 0;
+}
+#else
+static int ftrace_module_notify(struct notifier_block *self,
+				unsigned long val, void *data)
+{
+	return 0;
+}
+#endif /* CONFIG_MODULES */
+
+struct notifier_block ftrace_module_nb = {
+	.notifier_call = ftrace_module_notify,
+	.priority = 0,
+};
+
 extern unsigned long __start_mcount_loc[];
 extern unsigned long __stop_mcount_loc[];
 
@@ -2236,6 +2869,12 @@ void __init ftrace_init(void)
 				  __start_mcount_loc,
 				  __stop_mcount_loc);
 
+	ret = register_module_notifier(&ftrace_module_nb);
+	if (ret)
+		pr_warning("Failed to register trace ftrace module notifier\n");
+
+	set_ftrace_early_filters();
+
 	return;
  failed:
 	ftrace_disabled = 1;
@@ -2417,7 +3056,6 @@ static const struct file_operations ftrace_pid_fops = {
 static __init int ftrace_init_debugfs(void)
 {
 	struct dentry *d_tracer;
-	struct dentry *entry;
 
 	d_tracer = tracing_init_dentry();
 	if (!d_tracer)
@@ -2425,11 +3063,11 @@ static __init int ftrace_init_debugfs(void)
 
 	ftrace_init_dyn_debugfs(d_tracer);
 
-	entry = debugfs_create_file("set_ftrace_pid", 0644, d_tracer,
-				    NULL, &ftrace_pid_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'set_ftrace_pid' entry\n");
+	trace_create_file("set_ftrace_pid", 0644, d_tracer,
+			    NULL, &ftrace_pid_fops);
+
+	ftrace_profile_debugfs(d_tracer);
+
 	return 0;
 }
 fs_initcall(ftrace_init_debugfs);
@@ -2538,7 +3176,7 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
-static atomic_t ftrace_graph_active;
+static int ftrace_graph_active;
 static struct notifier_block ftrace_suspend_notifier;
 
 int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
@@ -2580,12 +3218,12 @@ static int alloc_retstack_tasklist(struct ftrace_ret_stack **ret_stack_list)
 		}
 
 		if (t->ret_stack == NULL) {
-			t->curr_ret_stack = -1;
-			/* Make sure IRQs see the -1 first: */
-			barrier();
-			t->ret_stack = ret_stack_list[start++];
 			atomic_set(&t->tracing_graph_pause, 0);
 			atomic_set(&t->trace_overrun, 0);
+			t->curr_ret_stack = -1;
+			/* Make sure the tasks see the -1 first: */
+			smp_wmb();
+			t->ret_stack = ret_stack_list[start++];
 		}
 	} while_each_thread(g, t);
 
@@ -2643,8 +3281,10 @@ static int start_graph_tracing(void)
 		return -ENOMEM;
 
 	/* The cpu_boot init_task->ret_stack will never be freed */
-	for_each_online_cpu(cpu)
-		ftrace_graph_init_task(idle_task(cpu));
+	for_each_online_cpu(cpu) {
+		if (!idle_task(cpu)->ret_stack)
+			ftrace_graph_init_task(idle_task(cpu));
+	}
 
 	do {
 		ret = alloc_retstack_tasklist(ret_stack_list);
@@ -2690,7 +3330,7 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 	mutex_lock(&ftrace_lock);
 
 	/* we currently allow only one tracer registered at a time */
-	if (atomic_read(&ftrace_graph_active)) {
+	if (ftrace_graph_active) {
 		ret = -EBUSY;
 		goto out;
 	}
@@ -2698,10 +3338,10 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 	ftrace_suspend_notifier.notifier_call = ftrace_suspend_notifier_call;
 	register_pm_notifier(&ftrace_suspend_notifier);
 
-	atomic_inc(&ftrace_graph_active);
+	ftrace_graph_active++;
 	ret = start_graph_tracing();
 	if (ret) {
-		atomic_dec(&ftrace_graph_active);
+		ftrace_graph_active--;
 		goto out;
 	}
 
@@ -2719,10 +3359,10 @@ void unregister_ftrace_graph(void)
 {
 	mutex_lock(&ftrace_lock);
 
-	if (!unlikely(atomic_read(&ftrace_graph_active)))
+	if (unlikely(!ftrace_graph_active))
 		goto out;
 
-	atomic_dec(&ftrace_graph_active);
+	ftrace_graph_active--;
 	unregister_trace_sched_switch(ftrace_graph_probe_sched_switch);
 	ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
 	ftrace_graph_entry = ftrace_graph_entry_stub;
@@ -2736,18 +3376,25 @@ void unregister_ftrace_graph(void)
 /* Allocate a return stack for newly created task */
 void ftrace_graph_init_task(struct task_struct *t)
 {
-	if (atomic_read(&ftrace_graph_active)) {
-		t->ret_stack = kmalloc(FTRACE_RETFUNC_DEPTH
+	/* Make sure we do not use the parent ret_stack */
+	t->ret_stack = NULL;
+
+	if (ftrace_graph_active) {
+		struct ftrace_ret_stack *ret_stack;
+
+		ret_stack = kmalloc(FTRACE_RETFUNC_DEPTH
 				* sizeof(struct ftrace_ret_stack),
 				GFP_KERNEL);
-		if (!t->ret_stack)
+		if (!ret_stack)
 			return;
 		t->curr_ret_stack = -1;
 		atomic_set(&t->tracing_graph_pause, 0);
 		atomic_set(&t->trace_overrun, 0);
 		t->ftrace_timestamp = 0;
-	} else
-		t->ret_stack = NULL;
+		/* make curr_ret_stack visable before we add the ret_stack */
+		smp_wmb();
+		t->ret_stack = ret_stack;
+	}
 }
 
 void ftrace_graph_exit_task(struct task_struct *t)
diff --git a/kernel/trace/kmemtrace.c b/kernel/trace/kmemtrace.c
index 5011f4d91e3..86cdf671d7e 100644
--- a/kernel/trace/kmemtrace.c
+++ b/kernel/trace/kmemtrace.c
@@ -12,7 +12,7 @@
 #include <linux/dcache.h>
 #include <linux/fs.h>
 
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
 
 #include "trace_output.h"
 #include "trace.h"
@@ -42,6 +42,7 @@ static inline void kmemtrace_alloc(enum kmemtrace_type_id type_id,
 				   gfp_t gfp_flags,
 				   int node)
 {
+	struct ftrace_event_call *call = &event_kmem_alloc;
 	struct trace_array *tr = kmemtrace_array;
 	struct kmemtrace_alloc_entry *entry;
 	struct ring_buffer_event *event;
@@ -62,7 +63,8 @@ static inline void kmemtrace_alloc(enum kmemtrace_type_id type_id,
 	entry->gfp_flags	= gfp_flags;
 	entry->node		= node;
 
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 
 	trace_wake_up();
 }
@@ -71,6 +73,7 @@ static inline void kmemtrace_free(enum kmemtrace_type_id type_id,
 				  unsigned long call_site,
 				  const void *ptr)
 {
+	struct ftrace_event_call *call = &event_kmem_free;
 	struct trace_array *tr = kmemtrace_array;
 	struct kmemtrace_free_entry *entry;
 	struct ring_buffer_event *event;
@@ -86,7 +89,8 @@ static inline void kmemtrace_free(enum kmemtrace_type_id type_id,
 	entry->call_site	= call_site;
 	entry->ptr		= ptr;
 
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 
 	trace_wake_up();
 }
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 960cbf44c84..2e642b2b725 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -22,6 +22,28 @@
 #include "trace.h"
 
 /*
+ * The ring buffer header is special. We must manually up keep it.
+ */
+int ring_buffer_print_entry_header(struct trace_seq *s)
+{
+	int ret;
+
+	ret = trace_seq_printf(s, "# compressed entry header\n");
+	ret = trace_seq_printf(s, "\ttype_len    :    5 bits\n");
+	ret = trace_seq_printf(s, "\ttime_delta  :   27 bits\n");
+	ret = trace_seq_printf(s, "\tarray       :   32 bits\n");
+	ret = trace_seq_printf(s, "\n");
+	ret = trace_seq_printf(s, "\tpadding     : type == %d\n",
+			       RINGBUF_TYPE_PADDING);
+	ret = trace_seq_printf(s, "\ttime_extend : type == %d\n",
+			       RINGBUF_TYPE_TIME_EXTEND);
+	ret = trace_seq_printf(s, "\tdata max type_len  == %d\n",
+			       RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
+
+	return ret;
+}
+
+/*
  * The ring buffer is made up of a list of pages. A separate list of pages is
  * allocated for each CPU. A writer may only write to a buffer that is
  * associated with the CPU it is currently executing on.  A reader may read
@@ -182,7 +204,10 @@ EXPORT_SYMBOL_GPL(tracing_is_on);
 
 #define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array))
 #define RB_ALIGNMENT		4U
-#define RB_MAX_SMALL_DATA	28
+#define RB_MAX_SMALL_DATA	(RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
+
+/* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */
+#define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX
 
 enum {
 	RB_LEN_TIME_EXTEND = 8,
@@ -191,48 +216,28 @@ enum {
 
 static inline int rb_null_event(struct ring_buffer_event *event)
 {
-	return event->type == RINGBUF_TYPE_PADDING && event->time_delta == 0;
+	return event->type_len == RINGBUF_TYPE_PADDING
+			&& event->time_delta == 0;
 }
 
 static inline int rb_discarded_event(struct ring_buffer_event *event)
 {
-	return event->type == RINGBUF_TYPE_PADDING && event->time_delta;
+	return event->type_len == RINGBUF_TYPE_PADDING && event->time_delta;
 }
 
 static void rb_event_set_padding(struct ring_buffer_event *event)
 {
-	event->type = RINGBUF_TYPE_PADDING;
+	event->type_len = RINGBUF_TYPE_PADDING;
 	event->time_delta = 0;
 }
 
-/**
- * ring_buffer_event_discard - discard an event in the ring buffer
- * @buffer: the ring buffer
- * @event: the event to discard
- *
- * Sometimes a event that is in the ring buffer needs to be ignored.
- * This function lets the user discard an event in the ring buffer
- * and then that event will not be read later.
- *
- * Note, it is up to the user to be careful with this, and protect
- * against races. If the user discards an event that has been consumed
- * it is possible that it could corrupt the ring buffer.
- */
-void ring_buffer_event_discard(struct ring_buffer_event *event)
-{
-	event->type = RINGBUF_TYPE_PADDING;
-	/* time delta must be non zero */
-	if (!event->time_delta)
-		event->time_delta = 1;
-}
-
 static unsigned
 rb_event_data_length(struct ring_buffer_event *event)
 {
 	unsigned length;
 
-	if (event->len)
-		length = event->len * RB_ALIGNMENT;
+	if (event->type_len)
+		length = event->type_len * RB_ALIGNMENT;
 	else
 		length = event->array[0];
 	return length + RB_EVNT_HDR_SIZE;
@@ -242,12 +247,12 @@ rb_event_data_length(struct ring_buffer_event *event)
 static unsigned
 rb_event_length(struct ring_buffer_event *event)
 {
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		if (rb_null_event(event))
 			/* undefined */
 			return -1;
-		return rb_event_data_length(event);
+		return  event->array[0] + RB_EVNT_HDR_SIZE;
 
 	case RINGBUF_TYPE_TIME_EXTEND:
 		return RB_LEN_TIME_EXTEND;
@@ -271,7 +276,7 @@ rb_event_length(struct ring_buffer_event *event)
 unsigned ring_buffer_event_length(struct ring_buffer_event *event)
 {
 	unsigned length = rb_event_length(event);
-	if (event->type != RINGBUF_TYPE_DATA)
+	if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
 		return length;
 	length -= RB_EVNT_HDR_SIZE;
 	if (length > RB_MAX_SMALL_DATA + sizeof(event->array[0]))
@@ -284,9 +289,9 @@ EXPORT_SYMBOL_GPL(ring_buffer_event_length);
 static void *
 rb_event_data(struct ring_buffer_event *event)
 {
-	BUG_ON(event->type != RINGBUF_TYPE_DATA);
+	BUG_ON(event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
 	/* If length is in len field, then array[0] has the data */
-	if (event->len)
+	if (event->type_len)
 		return (void *)&event->array[0];
 	/* Otherwise length is in array[0] and array[1] has the data */
 	return (void *)&event->array[1];
@@ -316,9 +321,10 @@ struct buffer_data_page {
 };
 
 struct buffer_page {
+	struct list_head list;		/* list of buffer pages */
 	local_t		 write;		/* index for next write */
 	unsigned	 read;		/* index for next read */
-	struct list_head list;		/* list of free pages */
+	local_t		 entries;	/* entries on this page */
 	struct buffer_data_page *page;	/* Actual data page */
 };
 
@@ -361,6 +367,34 @@ static inline int test_time_stamp(u64 delta)
 
 #define BUF_PAGE_SIZE (PAGE_SIZE - BUF_PAGE_HDR_SIZE)
 
+/* Max payload is BUF_PAGE_SIZE - header (8bytes) */
+#define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2))
+
+/* Max number of timestamps that can fit on a page */
+#define RB_TIMESTAMPS_PER_PAGE	(BUF_PAGE_SIZE / RB_LEN_TIME_STAMP)
+
+int ring_buffer_print_page_header(struct trace_seq *s)
+{
+	struct buffer_data_page field;
+	int ret;
+
+	ret = trace_seq_printf(s, "\tfield: u64 timestamp;\t"
+			       "offset:0;\tsize:%u;\n",
+			       (unsigned int)sizeof(field.time_stamp));
+
+	ret = trace_seq_printf(s, "\tfield: local_t commit;\t"
+			       "offset:%u;\tsize:%u;\n",
+			       (unsigned int)offsetof(typeof(field), commit),
+			       (unsigned int)sizeof(field.commit));
+
+	ret = trace_seq_printf(s, "\tfield: char data;\t"
+			       "offset:%u;\tsize:%u;\n",
+			       (unsigned int)offsetof(typeof(field), data),
+			       (unsigned int)BUF_PAGE_SIZE);
+
+	return ret;
+}
+
 /*
  * head_page == tail_page && head == tail then buffer is empty.
  */
@@ -375,8 +409,11 @@ struct ring_buffer_per_cpu {
 	struct buffer_page		*tail_page;	/* write to tail */
 	struct buffer_page		*commit_page;	/* committed pages */
 	struct buffer_page		*reader_page;
+	unsigned long			nmi_dropped;
+	unsigned long			commit_overrun;
 	unsigned long			overrun;
-	unsigned long			entries;
+	unsigned long			read;
+	local_t				entries;
 	u64				write_stamp;
 	u64				read_stamp;
 	atomic_t			record_disabled;
@@ -389,6 +426,8 @@ struct ring_buffer {
 	atomic_t			record_disabled;
 	cpumask_var_t			cpumask;
 
+	struct lock_class_key		*reader_lock_key;
+
 	struct mutex			mutex;
 
 	struct ring_buffer_per_cpu	**buffers;
@@ -420,13 +459,18 @@ struct ring_buffer_iter {
 /* Up this if you want to test the TIME_EXTENTS and normalization */
 #define DEBUG_SHIFT 0
 
+static inline u64 rb_time_stamp(struct ring_buffer *buffer, int cpu)
+{
+	/* shift to debug/test normalization and TIME_EXTENTS */
+	return buffer->clock() << DEBUG_SHIFT;
+}
+
 u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu)
 {
 	u64 time;
 
 	preempt_disable_notrace();
-	/* shift to debug/test normalization and TIME_EXTENTS */
-	time = buffer->clock() << DEBUG_SHIFT;
+	time = rb_time_stamp(buffer, cpu);
 	preempt_enable_no_resched_notrace();
 
 	return time;
@@ -523,6 +567,7 @@ rb_allocate_cpu_buffer(struct ring_buffer *buffer, int cpu)
 	cpu_buffer->cpu = cpu;
 	cpu_buffer->buffer = buffer;
 	spin_lock_init(&cpu_buffer->reader_lock);
+	lockdep_set_class(&cpu_buffer->reader_lock, buffer->reader_lock_key);
 	cpu_buffer->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
 	INIT_LIST_HEAD(&cpu_buffer->pages);
 
@@ -593,7 +638,8 @@ static int rb_cpu_notify(struct notifier_block *self,
  * when the buffer wraps. If this flag is not set, the buffer will
  * drop data when the tail hits the head.
  */
-struct ring_buffer *ring_buffer_alloc(unsigned long size, unsigned flags)
+struct ring_buffer *__ring_buffer_alloc(unsigned long size, unsigned flags,
+					struct lock_class_key *key)
 {
 	struct ring_buffer *buffer;
 	int bsize;
@@ -616,6 +662,7 @@ struct ring_buffer *ring_buffer_alloc(unsigned long size, unsigned flags)
 	buffer->pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
 	buffer->flags = flags;
 	buffer->clock = trace_clock_local;
+	buffer->reader_lock_key = key;
 
 	/* need at least two pages */
 	if (buffer->pages == 1)
@@ -673,7 +720,7 @@ struct ring_buffer *ring_buffer_alloc(unsigned long size, unsigned flags)
 	kfree(buffer);
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(ring_buffer_alloc);
+EXPORT_SYMBOL_GPL(__ring_buffer_alloc);
 
 /**
  * ring_buffer_free - free a ring buffer.
@@ -947,31 +994,6 @@ static inline unsigned rb_head_size(struct ring_buffer_per_cpu *cpu_buffer)
 	return rb_page_commit(cpu_buffer->head_page);
 }
 
-/*
- * When the tail hits the head and the buffer is in overwrite mode,
- * the head jumps to the next page and all content on the previous
- * page is discarded. But before doing so, we update the overrun
- * variable of the buffer.
- */
-static void rb_update_overflow(struct ring_buffer_per_cpu *cpu_buffer)
-{
-	struct ring_buffer_event *event;
-	unsigned long head;
-
-	for (head = 0; head < rb_head_size(cpu_buffer);
-	     head += rb_event_length(event)) {
-
-		event = __rb_page_index(cpu_buffer->head_page, head);
-		if (RB_WARN_ON(cpu_buffer, rb_null_event(event)))
-			return;
-		/* Only count data entries */
-		if (event->type != RINGBUF_TYPE_DATA)
-			continue;
-		cpu_buffer->overrun++;
-		cpu_buffer->entries--;
-	}
-}
-
 static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer,
 			       struct buffer_page **bpage)
 {
@@ -991,7 +1013,7 @@ rb_event_index(struct ring_buffer_event *event)
 	return (addr & ~PAGE_MASK) - (PAGE_SIZE - BUF_PAGE_SIZE);
 }
 
-static int
+static inline int
 rb_is_commit(struct ring_buffer_per_cpu *cpu_buffer,
 	     struct ring_buffer_event *event)
 {
@@ -1110,28 +1132,21 @@ static void
 rb_update_event(struct ring_buffer_event *event,
 			 unsigned type, unsigned length)
 {
-	event->type = type;
+	event->type_len = type;
 
 	switch (type) {
 
 	case RINGBUF_TYPE_PADDING:
-		break;
-
 	case RINGBUF_TYPE_TIME_EXTEND:
-		event->len = DIV_ROUND_UP(RB_LEN_TIME_EXTEND, RB_ALIGNMENT);
-		break;
-
 	case RINGBUF_TYPE_TIME_STAMP:
-		event->len = DIV_ROUND_UP(RB_LEN_TIME_STAMP, RB_ALIGNMENT);
 		break;
 
-	case RINGBUF_TYPE_DATA:
+	case 0:
 		length -= RB_EVNT_HDR_SIZE;
-		if (length > RB_MAX_SMALL_DATA) {
-			event->len = 0;
+		if (length > RB_MAX_SMALL_DATA)
 			event->array[0] = length;
-		} else
-			event->len = DIV_ROUND_UP(length, RB_ALIGNMENT);
+		else
+			event->type_len = DIV_ROUND_UP(length, RB_ALIGNMENT);
 		break;
 	default:
 		BUG();
@@ -1155,131 +1170,156 @@ static unsigned rb_calculate_event_length(unsigned length)
 	return length;
 }
 
+
 static struct ring_buffer_event *
-__rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
-		  unsigned type, unsigned long length, u64 *ts)
+rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
+	     unsigned long length, unsigned long tail,
+	     struct buffer_page *commit_page,
+	     struct buffer_page *tail_page, u64 *ts)
 {
-	struct buffer_page *tail_page, *head_page, *reader_page, *commit_page;
-	unsigned long tail, write;
+	struct buffer_page *next_page, *head_page, *reader_page;
 	struct ring_buffer *buffer = cpu_buffer->buffer;
 	struct ring_buffer_event *event;
-	unsigned long flags;
 	bool lock_taken = false;
+	unsigned long flags;
 
-	commit_page = cpu_buffer->commit_page;
-	/* we just need to protect against interrupts */
-	barrier();
-	tail_page = cpu_buffer->tail_page;
-	write = local_add_return(length, &tail_page->write);
-	tail = write - length;
+	next_page = tail_page;
 
-	/* See if we shot pass the end of this buffer page */
-	if (write > BUF_PAGE_SIZE) {
-		struct buffer_page *next_page = tail_page;
+	local_irq_save(flags);
+	/*
+	 * Since the write to the buffer is still not
+	 * fully lockless, we must be careful with NMIs.
+	 * The locks in the writers are taken when a write
+	 * crosses to a new page. The locks protect against
+	 * races with the readers (this will soon be fixed
+	 * with a lockless solution).
+	 *
+	 * Because we can not protect against NMIs, and we
+	 * want to keep traces reentrant, we need to manage
+	 * what happens when we are in an NMI.
+	 *
+	 * NMIs can happen after we take the lock.
+	 * If we are in an NMI, only take the lock
+	 * if it is not already taken. Otherwise
+	 * simply fail.
+	 */
+	if (unlikely(in_nmi())) {
+		if (!__raw_spin_trylock(&cpu_buffer->lock)) {
+			cpu_buffer->nmi_dropped++;
+			goto out_reset;
+		}
+	} else
+		__raw_spin_lock(&cpu_buffer->lock);
 
-		local_irq_save(flags);
-		/*
-		 * Since the write to the buffer is still not
-		 * fully lockless, we must be careful with NMIs.
-		 * The locks in the writers are taken when a write
-		 * crosses to a new page. The locks protect against
-		 * races with the readers (this will soon be fixed
-		 * with a lockless solution).
-		 *
-		 * Because we can not protect against NMIs, and we
-		 * want to keep traces reentrant, we need to manage
-		 * what happens when we are in an NMI.
-		 *
-		 * NMIs can happen after we take the lock.
-		 * If we are in an NMI, only take the lock
-		 * if it is not already taken. Otherwise
-		 * simply fail.
-		 */
-		if (unlikely(in_nmi())) {
-			if (!__raw_spin_trylock(&cpu_buffer->lock))
-				goto out_reset;
-		} else
-			__raw_spin_lock(&cpu_buffer->lock);
+	lock_taken = true;
 
-		lock_taken = true;
+	rb_inc_page(cpu_buffer, &next_page);
 
-		rb_inc_page(cpu_buffer, &next_page);
+	head_page = cpu_buffer->head_page;
+	reader_page = cpu_buffer->reader_page;
 
-		head_page = cpu_buffer->head_page;
-		reader_page = cpu_buffer->reader_page;
+	/* we grabbed the lock before incrementing */
+	if (RB_WARN_ON(cpu_buffer, next_page == reader_page))
+		goto out_reset;
 
-		/* we grabbed the lock before incrementing */
-		if (RB_WARN_ON(cpu_buffer, next_page == reader_page))
-			goto out_reset;
+	/*
+	 * If for some reason, we had an interrupt storm that made
+	 * it all the way around the buffer, bail, and warn
+	 * about it.
+	 */
+	if (unlikely(next_page == commit_page)) {
+		cpu_buffer->commit_overrun++;
+		goto out_reset;
+	}
 
-		/*
-		 * If for some reason, we had an interrupt storm that made
-		 * it all the way around the buffer, bail, and warn
-		 * about it.
-		 */
-		if (unlikely(next_page == commit_page)) {
-			WARN_ON_ONCE(1);
+	if (next_page == head_page) {
+		if (!(buffer->flags & RB_FL_OVERWRITE))
 			goto out_reset;
-		}
 
-		if (next_page == head_page) {
-			if (!(buffer->flags & RB_FL_OVERWRITE))
-				goto out_reset;
-
-			/* tail_page has not moved yet? */
-			if (tail_page == cpu_buffer->tail_page) {
-				/* count overflows */
-				rb_update_overflow(cpu_buffer);
+		/* tail_page has not moved yet? */
+		if (tail_page == cpu_buffer->tail_page) {
+			/* count overflows */
+			cpu_buffer->overrun +=
+				local_read(&head_page->entries);
 
-				rb_inc_page(cpu_buffer, &head_page);
-				cpu_buffer->head_page = head_page;
-				cpu_buffer->head_page->read = 0;
-			}
+			rb_inc_page(cpu_buffer, &head_page);
+			cpu_buffer->head_page = head_page;
+			cpu_buffer->head_page->read = 0;
 		}
+	}
 
-		/*
-		 * If the tail page is still the same as what we think
-		 * it is, then it is up to us to update the tail
-		 * pointer.
-		 */
-		if (tail_page == cpu_buffer->tail_page) {
-			local_set(&next_page->write, 0);
-			local_set(&next_page->page->commit, 0);
-			cpu_buffer->tail_page = next_page;
+	/*
+	 * If the tail page is still the same as what we think
+	 * it is, then it is up to us to update the tail
+	 * pointer.
+	 */
+	if (tail_page == cpu_buffer->tail_page) {
+		local_set(&next_page->write, 0);
+		local_set(&next_page->entries, 0);
+		local_set(&next_page->page->commit, 0);
+		cpu_buffer->tail_page = next_page;
+
+		/* reread the time stamp */
+		*ts = rb_time_stamp(buffer, cpu_buffer->cpu);
+		cpu_buffer->tail_page->page->time_stamp = *ts;
+	}
 
-			/* reread the time stamp */
-			*ts = ring_buffer_time_stamp(buffer, cpu_buffer->cpu);
-			cpu_buffer->tail_page->page->time_stamp = *ts;
-		}
+	/*
+	 * The actual tail page has moved forward.
+	 */
+	if (tail < BUF_PAGE_SIZE) {
+		/* Mark the rest of the page with padding */
+		event = __rb_page_index(tail_page, tail);
+		rb_event_set_padding(event);
+	}
 
-		/*
-		 * The actual tail page has moved forward.
-		 */
-		if (tail < BUF_PAGE_SIZE) {
-			/* Mark the rest of the page with padding */
-			event = __rb_page_index(tail_page, tail);
-			rb_event_set_padding(event);
-		}
+	/* Set the write back to the previous setting */
+	local_sub(length, &tail_page->write);
 
-		if (tail <= BUF_PAGE_SIZE)
-			/* Set the write back to the previous setting */
-			local_set(&tail_page->write, tail);
+	/*
+	 * If this was a commit entry that failed,
+	 * increment that too
+	 */
+	if (tail_page == cpu_buffer->commit_page &&
+	    tail == rb_commit_index(cpu_buffer)) {
+		rb_set_commit_to_write(cpu_buffer);
+	}
 
-		/*
-		 * If this was a commit entry that failed,
-		 * increment that too
-		 */
-		if (tail_page == cpu_buffer->commit_page &&
-		    tail == rb_commit_index(cpu_buffer)) {
-			rb_set_commit_to_write(cpu_buffer);
-		}
+	__raw_spin_unlock(&cpu_buffer->lock);
+	local_irq_restore(flags);
+
+	/* fail and let the caller try again */
+	return ERR_PTR(-EAGAIN);
+
+ out_reset:
+	/* reset write */
+	local_sub(length, &tail_page->write);
 
+	if (likely(lock_taken))
 		__raw_spin_unlock(&cpu_buffer->lock);
-		local_irq_restore(flags);
+	local_irq_restore(flags);
+	return NULL;
+}
 
-		/* fail and let the caller try again */
-		return ERR_PTR(-EAGAIN);
-	}
+static struct ring_buffer_event *
+__rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
+		  unsigned type, unsigned long length, u64 *ts)
+{
+	struct buffer_page *tail_page, *commit_page;
+	struct ring_buffer_event *event;
+	unsigned long tail, write;
+
+	commit_page = cpu_buffer->commit_page;
+	/* we just need to protect against interrupts */
+	barrier();
+	tail_page = cpu_buffer->tail_page;
+	write = local_add_return(length, &tail_page->write);
+	tail = write - length;
+
+	/* See if we shot pass the end of this buffer page */
+	if (write > BUF_PAGE_SIZE)
+		return rb_move_tail(cpu_buffer, length, tail,
+				    commit_page, tail_page, ts);
 
 	/* We reserved something on the buffer */
 
@@ -1289,6 +1329,10 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 	event = __rb_page_index(tail_page, tail);
 	rb_update_event(event, type, length);
 
+	/* The passed in type is zero for DATA */
+	if (likely(!type))
+		local_inc(&tail_page->entries);
+
 	/*
 	 * If this is a commit and the tail is zero, then update
 	 * this page's time stamp.
@@ -1297,16 +1341,38 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 		cpu_buffer->commit_page->page->time_stamp = *ts;
 
 	return event;
+}
 
- out_reset:
-	/* reset write */
-	if (tail <= BUF_PAGE_SIZE)
-		local_set(&tail_page->write, tail);
+static inline int
+rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer,
+		  struct ring_buffer_event *event)
+{
+	unsigned long new_index, old_index;
+	struct buffer_page *bpage;
+	unsigned long index;
+	unsigned long addr;
 
-	if (likely(lock_taken))
-		__raw_spin_unlock(&cpu_buffer->lock);
-	local_irq_restore(flags);
-	return NULL;
+	new_index = rb_event_index(event);
+	old_index = new_index + rb_event_length(event);
+	addr = (unsigned long)event;
+	addr &= PAGE_MASK;
+
+	bpage = cpu_buffer->tail_page;
+
+	if (bpage->page == (void *)addr && rb_page_write(bpage) == old_index) {
+		/*
+		 * This is on the tail page. It is possible that
+		 * a write could come in and move the tail page
+		 * and write to the next page. That is fine
+		 * because we just shorten what is on this page.
+		 */
+		index = local_cmpxchg(&bpage->write, old_index, new_index);
+		if (index == old_index)
+			return 1;
+	}
+
+	/* could not discard */
+	return 0;
 }
 
 static int
@@ -1351,16 +1417,23 @@ rb_add_time_stamp(struct ring_buffer_per_cpu *cpu_buffer,
 			event->array[0] = *delta >> TS_SHIFT;
 		} else {
 			cpu_buffer->commit_page->page->time_stamp = *ts;
-			event->time_delta = 0;
-			event->array[0] = 0;
+			/* try to discard, since we do not need this */
+			if (!rb_try_to_discard(cpu_buffer, event)) {
+				/* nope, just zero it */
+				event->time_delta = 0;
+				event->array[0] = 0;
+			}
 		}
 		cpu_buffer->write_stamp = *ts;
 		/* let the caller know this was the commit */
 		ret = 1;
 	} else {
-		/* Darn, this is just wasted space */
-		event->time_delta = 0;
-		event->array[0] = 0;
+		/* Try to discard the event */
+		if (!rb_try_to_discard(cpu_buffer, event)) {
+			/* Darn, this is just wasted space */
+			event->time_delta = 0;
+			event->array[0] = 0;
+		}
 		ret = 0;
 	}
 
@@ -1371,13 +1444,14 @@ rb_add_time_stamp(struct ring_buffer_per_cpu *cpu_buffer,
 
 static struct ring_buffer_event *
 rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
-		      unsigned type, unsigned long length)
+		      unsigned long length)
 {
 	struct ring_buffer_event *event;
-	u64 ts, delta;
+	u64 ts, delta = 0;
 	int commit = 0;
 	int nr_loops = 0;
 
+	length = rb_calculate_event_length(length);
  again:
 	/*
 	 * We allow for interrupts to reenter here and do a trace.
@@ -1391,7 +1465,7 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000))
 		return NULL;
 
-	ts = ring_buffer_time_stamp(cpu_buffer->buffer, cpu_buffer->cpu);
+	ts = rb_time_stamp(cpu_buffer->buffer, cpu_buffer->cpu);
 
 	/*
 	 * Only the first commit can update the timestamp.
@@ -1401,23 +1475,24 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	 * also be made. But only the entry that did the actual
 	 * commit will be something other than zero.
 	 */
-	if (cpu_buffer->tail_page == cpu_buffer->commit_page &&
-	    rb_page_write(cpu_buffer->tail_page) ==
-	    rb_commit_index(cpu_buffer)) {
+	if (likely(cpu_buffer->tail_page == cpu_buffer->commit_page &&
+		   rb_page_write(cpu_buffer->tail_page) ==
+		   rb_commit_index(cpu_buffer))) {
+		u64 diff;
 
-		delta = ts - cpu_buffer->write_stamp;
+		diff = ts - cpu_buffer->write_stamp;
 
-		/* make sure this delta is calculated here */
+		/* make sure this diff is calculated here */
 		barrier();
 
 		/* Did the write stamp get updated already? */
 		if (unlikely(ts < cpu_buffer->write_stamp))
-			delta = 0;
+			goto get_event;
 
-		if (test_time_stamp(delta)) {
+		delta = diff;
+		if (unlikely(test_time_stamp(delta))) {
 
 			commit = rb_add_time_stamp(cpu_buffer, &ts, &delta);
-
 			if (commit == -EBUSY)
 				return NULL;
 
@@ -1426,12 +1501,11 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 
 			RB_WARN_ON(cpu_buffer, commit < 0);
 		}
-	} else
-		/* Non commits have zero deltas */
-		delta = 0;
+	}
 
-	event = __rb_reserve_next(cpu_buffer, type, length, &ts);
-	if (PTR_ERR(event) == -EAGAIN)
+ get_event:
+	event = __rb_reserve_next(cpu_buffer, 0, length, &ts);
+	if (unlikely(PTR_ERR(event) == -EAGAIN))
 		goto again;
 
 	if (!event) {
@@ -1448,7 +1522,7 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	 * If the timestamp was commited, make the commit our entry
 	 * now so that we will update it when needed.
 	 */
-	if (commit)
+	if (unlikely(commit))
 		rb_set_commit_event(cpu_buffer, event);
 	else if (!rb_is_commit(cpu_buffer, event))
 		delta = 0;
@@ -1458,6 +1532,36 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
 	return event;
 }
 
+#define TRACE_RECURSIVE_DEPTH 16
+
+static int trace_recursive_lock(void)
+{
+	current->trace_recursion++;
+
+	if (likely(current->trace_recursion < TRACE_RECURSIVE_DEPTH))
+		return 0;
+
+	/* Disable all tracing before we do anything else */
+	tracing_off_permanent();
+
+	printk_once(KERN_WARNING "Tracing recursion: depth[%ld]:"
+		    "HC[%lu]:SC[%lu]:NMI[%lu]\n",
+		    current->trace_recursion,
+		    hardirq_count() >> HARDIRQ_SHIFT,
+		    softirq_count() >> SOFTIRQ_SHIFT,
+		    in_nmi());
+
+	WARN_ON_ONCE(1);
+	return -1;
+}
+
+static void trace_recursive_unlock(void)
+{
+	WARN_ON_ONCE(!current->trace_recursion);
+
+	current->trace_recursion--;
+}
+
 static DEFINE_PER_CPU(int, rb_need_resched);
 
 /**
@@ -1491,6 +1595,9 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 	/* If we are tracing schedule, we don't want to recurse */
 	resched = ftrace_preempt_disable();
 
+	if (trace_recursive_lock())
+		goto out_nocheck;
+
 	cpu = raw_smp_processor_id();
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
@@ -1501,11 +1608,10 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 	if (atomic_read(&cpu_buffer->record_disabled))
 		goto out;
 
-	length = rb_calculate_event_length(length);
-	if (length > BUF_PAGE_SIZE)
+	if (length > BUF_MAX_DATA_SIZE)
 		goto out;
 
-	event = rb_reserve_next_event(cpu_buffer, RINGBUF_TYPE_DATA, length);
+	event = rb_reserve_next_event(cpu_buffer, length);
 	if (!event)
 		goto out;
 
@@ -1520,6 +1626,9 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 	return event;
 
  out:
+	trace_recursive_unlock();
+
+ out_nocheck:
 	ftrace_preempt_enable(resched);
 	return NULL;
 }
@@ -1528,7 +1637,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_lock_reserve);
 static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer,
 		      struct ring_buffer_event *event)
 {
-	cpu_buffer->entries++;
+	local_inc(&cpu_buffer->entries);
 
 	/* Only process further if we own the commit */
 	if (!rb_is_commit(cpu_buffer, event))
@@ -1558,6 +1667,8 @@ int ring_buffer_unlock_commit(struct ring_buffer *buffer,
 
 	rb_commit(cpu_buffer, event);
 
+	trace_recursive_unlock();
+
 	/*
 	 * Only the last preempt count needs to restore preemption.
 	 */
@@ -1570,6 +1681,99 @@ int ring_buffer_unlock_commit(struct ring_buffer *buffer,
 }
 EXPORT_SYMBOL_GPL(ring_buffer_unlock_commit);
 
+static inline void rb_event_discard(struct ring_buffer_event *event)
+{
+	/* array[0] holds the actual length for the discarded event */
+	event->array[0] = rb_event_data_length(event) - RB_EVNT_HDR_SIZE;
+	event->type_len = RINGBUF_TYPE_PADDING;
+	/* time delta must be non zero */
+	if (!event->time_delta)
+		event->time_delta = 1;
+}
+
+/**
+ * ring_buffer_event_discard - discard any event in the ring buffer
+ * @event: the event to discard
+ *
+ * Sometimes a event that is in the ring buffer needs to be ignored.
+ * This function lets the user discard an event in the ring buffer
+ * and then that event will not be read later.
+ *
+ * Note, it is up to the user to be careful with this, and protect
+ * against races. If the user discards an event that has been consumed
+ * it is possible that it could corrupt the ring buffer.
+ */
+void ring_buffer_event_discard(struct ring_buffer_event *event)
+{
+	rb_event_discard(event);
+}
+EXPORT_SYMBOL_GPL(ring_buffer_event_discard);
+
+/**
+ * ring_buffer_commit_discard - discard an event that has not been committed
+ * @buffer: the ring buffer
+ * @event: non committed event to discard
+ *
+ * This is similar to ring_buffer_event_discard but must only be
+ * performed on an event that has not been committed yet. The difference
+ * is that this will also try to free the event from the ring buffer
+ * if another event has not been added behind it.
+ *
+ * If another event has been added behind it, it will set the event
+ * up as discarded, and perform the commit.
+ *
+ * If this function is called, do not call ring_buffer_unlock_commit on
+ * the event.
+ */
+void ring_buffer_discard_commit(struct ring_buffer *buffer,
+				struct ring_buffer_event *event)
+{
+	struct ring_buffer_per_cpu *cpu_buffer;
+	int cpu;
+
+	/* The event is discarded regardless */
+	rb_event_discard(event);
+
+	/*
+	 * This must only be called if the event has not been
+	 * committed yet. Thus we can assume that preemption
+	 * is still disabled.
+	 */
+	RB_WARN_ON(buffer, preemptible());
+
+	cpu = smp_processor_id();
+	cpu_buffer = buffer->buffers[cpu];
+
+	if (!rb_try_to_discard(cpu_buffer, event))
+		goto out;
+
+	/*
+	 * The commit is still visible by the reader, so we
+	 * must increment entries.
+	 */
+	local_inc(&cpu_buffer->entries);
+ out:
+	/*
+	 * If a write came in and pushed the tail page
+	 * we still need to update the commit pointer
+	 * if we were the commit.
+	 */
+	if (rb_is_commit(cpu_buffer, event))
+		rb_set_commit_to_write(cpu_buffer);
+
+	trace_recursive_unlock();
+
+	/*
+	 * Only the last preempt count needs to restore preemption.
+	 */
+	if (preempt_count() == 1)
+		ftrace_preempt_enable(per_cpu(rb_need_resched, cpu));
+	else
+		preempt_enable_no_resched_notrace();
+
+}
+EXPORT_SYMBOL_GPL(ring_buffer_discard_commit);
+
 /**
  * ring_buffer_write - write data to the buffer without reserving
  * @buffer: The ring buffer to write to.
@@ -1589,7 +1793,6 @@ int ring_buffer_write(struct ring_buffer *buffer,
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_event *event;
-	unsigned long event_length;
 	void *body;
 	int ret = -EBUSY;
 	int cpu, resched;
@@ -1612,9 +1815,10 @@ int ring_buffer_write(struct ring_buffer *buffer,
 	if (atomic_read(&cpu_buffer->record_disabled))
 		goto out;
 
-	event_length = rb_calculate_event_length(length);
-	event = rb_reserve_next_event(cpu_buffer,
-				      RINGBUF_TYPE_DATA, event_length);
+	if (length > BUF_MAX_DATA_SIZE)
+		goto out;
+
+	event = rb_reserve_next_event(cpu_buffer, length);
 	if (!event)
 		goto out;
 
@@ -1728,7 +1932,8 @@ unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu)
 		return 0;
 
 	cpu_buffer = buffer->buffers[cpu];
-	ret = cpu_buffer->entries;
+	ret = (local_read(&cpu_buffer->entries) - cpu_buffer->overrun)
+		- cpu_buffer->read;
 
 	return ret;
 }
@@ -1755,6 +1960,47 @@ unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu)
 EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu);
 
 /**
+ * ring_buffer_nmi_dropped_cpu - get the number of nmis that were dropped
+ * @buffer: The ring buffer
+ * @cpu: The per CPU buffer to get the number of overruns from
+ */
+unsigned long ring_buffer_nmi_dropped_cpu(struct ring_buffer *buffer, int cpu)
+{
+	struct ring_buffer_per_cpu *cpu_buffer;
+	unsigned long ret;
+
+	if (!cpumask_test_cpu(cpu, buffer->cpumask))
+		return 0;
+
+	cpu_buffer = buffer->buffers[cpu];
+	ret = cpu_buffer->nmi_dropped;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ring_buffer_nmi_dropped_cpu);
+
+/**
+ * ring_buffer_commit_overrun_cpu - get the number of overruns caused by commits
+ * @buffer: The ring buffer
+ * @cpu: The per CPU buffer to get the number of overruns from
+ */
+unsigned long
+ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu)
+{
+	struct ring_buffer_per_cpu *cpu_buffer;
+	unsigned long ret;
+
+	if (!cpumask_test_cpu(cpu, buffer->cpumask))
+		return 0;
+
+	cpu_buffer = buffer->buffers[cpu];
+	ret = cpu_buffer->commit_overrun;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ring_buffer_commit_overrun_cpu);
+
+/**
  * ring_buffer_entries - get the number of entries in a buffer
  * @buffer: The ring buffer
  *
@@ -1770,7 +2016,8 @@ unsigned long ring_buffer_entries(struct ring_buffer *buffer)
 	/* if you care about this being correct, lock the buffer */
 	for_each_buffer_cpu(buffer, cpu) {
 		cpu_buffer = buffer->buffers[cpu];
-		entries += cpu_buffer->entries;
+		entries += (local_read(&cpu_buffer->entries) -
+			    cpu_buffer->overrun) - cpu_buffer->read;
 	}
 
 	return entries;
@@ -1862,7 +2109,7 @@ rb_update_read_stamp(struct ring_buffer_per_cpu *cpu_buffer,
 {
 	u64 delta;
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		return;
 
@@ -1893,7 +2140,7 @@ rb_update_iter_read_stamp(struct ring_buffer_iter *iter,
 {
 	u64 delta;
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		return;
 
@@ -1966,6 +2213,7 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
 	cpu_buffer->reader_page->list.prev = reader->list.prev;
 
 	local_set(&cpu_buffer->reader_page->write, 0);
+	local_set(&cpu_buffer->reader_page->entries, 0);
 	local_set(&cpu_buffer->reader_page->page->commit, 0);
 
 	/* Make the reader page now replace the head */
@@ -2008,8 +2256,9 @@ static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer)
 
 	event = rb_reader_event(cpu_buffer);
 
-	if (event->type == RINGBUF_TYPE_DATA || rb_discarded_event(event))
-		cpu_buffer->entries--;
+	if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX
+			|| rb_discarded_event(event))
+		cpu_buffer->read++;
 
 	rb_update_read_stamp(cpu_buffer, event);
 
@@ -2031,8 +2280,8 @@ static void rb_advance_iter(struct ring_buffer_iter *iter)
 	 * Check if we are at the end of the buffer.
 	 */
 	if (iter->head >= rb_page_size(iter->head_page)) {
-		if (RB_WARN_ON(buffer,
-			       iter->head_page == cpu_buffer->commit_page))
+		/* discarded commits can make the page empty */
+		if (iter->head_page == cpu_buffer->commit_page)
 			return;
 		rb_inc_iter(iter);
 		return;
@@ -2075,12 +2324,10 @@ rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	/*
 	 * We repeat when a timestamp is encountered. It is possible
 	 * to get multiple timestamps from an interrupt entering just
-	 * as one timestamp is about to be written. The max times
-	 * that this can happen is the number of nested interrupts we
-	 * can have.  Nesting 10 deep of interrupts is clearly
-	 * an anomaly.
+	 * as one timestamp is about to be written, or from discarded
+	 * commits. The most that we can have is the number on a single page.
 	 */
-	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
+	if (RB_WARN_ON(cpu_buffer, ++nr_loops > RB_TIMESTAMPS_PER_PAGE))
 		return NULL;
 
 	reader = rb_get_reader_page(cpu_buffer);
@@ -2089,7 +2336,7 @@ rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 
 	event = rb_reader_event(cpu_buffer);
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		if (rb_null_event(event))
 			RB_WARN_ON(cpu_buffer, 1);
@@ -2146,14 +2393,14 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 
  again:
 	/*
-	 * We repeat when a timestamp is encountered. It is possible
-	 * to get multiple timestamps from an interrupt entering just
-	 * as one timestamp is about to be written. The max times
-	 * that this can happen is the number of nested interrupts we
-	 * can have. Nesting 10 deep of interrupts is clearly
-	 * an anomaly.
+	 * We repeat when a timestamp is encountered.
+	 * We can get multiple timestamps by nested interrupts or also
+	 * if filtering is on (discarding commits). Since discarding
+	 * commits can be frequent we can get a lot of timestamps.
+	 * But we limit them by not adding timestamps if they begin
+	 * at the start of a page.
 	 */
-	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
+	if (RB_WARN_ON(cpu_buffer, ++nr_loops > RB_TIMESTAMPS_PER_PAGE))
 		return NULL;
 
 	if (rb_per_cpu_empty(cpu_buffer))
@@ -2161,7 +2408,7 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 
 	event = rb_iter_head_event(iter);
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		if (rb_null_event(event)) {
 			rb_inc_iter(iter);
@@ -2220,7 +2467,7 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	event = rb_buffer_peek(buffer, cpu, ts);
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2248,7 +2495,7 @@ ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 	event = rb_iter_peek(iter, ts);
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2293,7 +2540,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
  out:
 	preempt_enable();
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2386,7 +2633,7 @@ ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts)
  out:
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2411,6 +2658,7 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
 	cpu_buffer->head_page
 		= list_entry(cpu_buffer->pages.next, struct buffer_page, list);
 	local_set(&cpu_buffer->head_page->write, 0);
+	local_set(&cpu_buffer->head_page->entries, 0);
 	local_set(&cpu_buffer->head_page->page->commit, 0);
 
 	cpu_buffer->head_page->read = 0;
@@ -2420,11 +2668,15 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
 
 	INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
 	local_set(&cpu_buffer->reader_page->write, 0);
+	local_set(&cpu_buffer->reader_page->entries, 0);
 	local_set(&cpu_buffer->reader_page->page->commit, 0);
 	cpu_buffer->reader_page->read = 0;
 
+	cpu_buffer->nmi_dropped = 0;
+	cpu_buffer->commit_overrun = 0;
 	cpu_buffer->overrun = 0;
-	cpu_buffer->entries = 0;
+	cpu_buffer->read = 0;
+	local_set(&cpu_buffer->entries, 0);
 
 	cpu_buffer->write_stamp = 0;
 	cpu_buffer->read_stamp = 0;
@@ -2443,6 +2695,8 @@ void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu)
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return;
 
+	atomic_inc(&cpu_buffer->record_disabled);
+
 	spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
 
 	__raw_spin_lock(&cpu_buffer->lock);
@@ -2452,6 +2706,8 @@ void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu)
 	__raw_spin_unlock(&cpu_buffer->lock);
 
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+
+	atomic_dec(&cpu_buffer->record_disabled);
 }
 EXPORT_SYMBOL_GPL(ring_buffer_reset_cpu);
 
@@ -2578,28 +2834,6 @@ out:
 }
 EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu);
 
-static void rb_remove_entries(struct ring_buffer_per_cpu *cpu_buffer,
-			      struct buffer_data_page *bpage,
-			      unsigned int offset)
-{
-	struct ring_buffer_event *event;
-	unsigned long head;
-
-	__raw_spin_lock(&cpu_buffer->lock);
-	for (head = offset; head < local_read(&bpage->commit);
-	     head += rb_event_length(event)) {
-
-		event = __rb_data_page_index(bpage, head);
-		if (RB_WARN_ON(cpu_buffer, rb_null_event(event)))
-			return;
-		/* Only count data entries */
-		if (event->type != RINGBUF_TYPE_DATA)
-			continue;
-		cpu_buffer->entries--;
-	}
-	__raw_spin_unlock(&cpu_buffer->lock);
-}
-
 /**
  * ring_buffer_alloc_read_page - allocate a page to read from buffer
  * @buffer: the buffer to allocate for.
@@ -2630,6 +2864,7 @@ void *ring_buffer_alloc_read_page(struct ring_buffer *buffer)
 
 	return bpage;
 }
+EXPORT_SYMBOL_GPL(ring_buffer_alloc_read_page);
 
 /**
  * ring_buffer_free_read_page - free an allocated read page
@@ -2642,6 +2877,7 @@ void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data)
 {
 	free_page((unsigned long)data);
 }
+EXPORT_SYMBOL_GPL(ring_buffer_free_read_page);
 
 /**
  * ring_buffer_read_page - extract a page from the ring buffer
@@ -2768,16 +3004,17 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
 		/* we copied everything to the beginning */
 		read = 0;
 	} else {
+		/* update the entry counter */
+		cpu_buffer->read += local_read(&reader->entries);
+
 		/* swap the pages */
 		rb_init_page(bpage);
 		bpage = reader->page;
 		reader->page = *data_page;
 		local_set(&reader->write, 0);
+		local_set(&reader->entries, 0);
 		reader->read = 0;
 		*data_page = bpage;
-
-		/* update the entry counter */
-		rb_remove_entries(cpu_buffer, bpage, read);
 	}
 	ret = read;
 
@@ -2787,6 +3024,7 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
  out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ring_buffer_read_page);
 
 static ssize_t
 rb_simple_read(struct file *filp, char __user *ubuf,
@@ -2845,14 +3083,11 @@ static const struct file_operations rb_simple_fops = {
 static __init int rb_init_debugfs(void)
 {
 	struct dentry *d_tracer;
-	struct dentry *entry;
 
 	d_tracer = tracing_init_dentry();
 
-	entry = debugfs_create_file("tracing_on", 0644, d_tracer,
-				    &ring_buffer_flags, &rb_simple_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'tracing_on' entry\n");
+	trace_create_file("tracing_on", 0644, d_tracer,
+			    &ring_buffer_flags, &rb_simple_fops);
 
 	return 0;
 }
diff --git a/kernel/trace/ring_buffer_benchmark.c b/kernel/trace/ring_buffer_benchmark.c
new file mode 100644
index 00000000000..8d68e149a8b
--- /dev/null
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -0,0 +1,416 @@
+/*
+ * ring buffer tester and benchmark
+ *
+ * Copyright (C) 2009 Steven Rostedt <srostedt@redhat.com>
+ */
+#include <linux/ring_buffer.h>
+#include <linux/completion.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/time.h>
+
+struct rb_page {
+	u64		ts;
+	local_t		commit;
+	char		data[4080];
+};
+
+/* run time and sleep time in seconds */
+#define RUN_TIME	10
+#define SLEEP_TIME	10
+
+/* number of events for writer to wake up the reader */
+static int wakeup_interval = 100;
+
+static int reader_finish;
+static struct completion read_start;
+static struct completion read_done;
+
+static struct ring_buffer *buffer;
+static struct task_struct *producer;
+static struct task_struct *consumer;
+static unsigned long read;
+
+static int disable_reader;
+module_param(disable_reader, uint, 0644);
+MODULE_PARM_DESC(disable_reader, "only run producer");
+
+static int read_events;
+
+static int kill_test;
+
+#define KILL_TEST()				\
+	do {					\
+		if (!kill_test) {		\
+			kill_test = 1;		\
+			WARN_ON(1);		\
+		}				\
+	} while (0)
+
+enum event_status {
+	EVENT_FOUND,
+	EVENT_DROPPED,
+};
+
+static enum event_status read_event(int cpu)
+{
+	struct ring_buffer_event *event;
+	int *entry;
+	u64 ts;
+
+	event = ring_buffer_consume(buffer, cpu, &ts);
+	if (!event)
+		return EVENT_DROPPED;
+
+	entry = ring_buffer_event_data(event);
+	if (*entry != cpu) {
+		KILL_TEST();
+		return EVENT_DROPPED;
+	}
+
+	read++;
+	return EVENT_FOUND;
+}
+
+static enum event_status read_page(int cpu)
+{
+	struct ring_buffer_event *event;
+	struct rb_page *rpage;
+	unsigned long commit;
+	void *bpage;
+	int *entry;
+	int ret;
+	int inc;
+	int i;
+
+	bpage = ring_buffer_alloc_read_page(buffer);
+	if (!bpage)
+		return EVENT_DROPPED;
+
+	ret = ring_buffer_read_page(buffer, &bpage, PAGE_SIZE, cpu, 1);
+	if (ret >= 0) {
+		rpage = bpage;
+		commit = local_read(&rpage->commit);
+		for (i = 0; i < commit && !kill_test; i += inc) {
+
+			if (i >= (PAGE_SIZE - offsetof(struct rb_page, data))) {
+				KILL_TEST();
+				break;
+			}
+
+			inc = -1;
+			event = (void *)&rpage->data[i];
+			switch (event->type_len) {
+			case RINGBUF_TYPE_PADDING:
+				/* We don't expect any padding */
+				KILL_TEST();
+				break;
+			case RINGBUF_TYPE_TIME_EXTEND:
+				inc = 8;
+				break;
+			case 0:
+				entry = ring_buffer_event_data(event);
+				if (*entry != cpu) {
+					KILL_TEST();
+					break;
+				}
+				read++;
+				if (!event->array[0]) {
+					KILL_TEST();
+					break;
+				}
+				inc = event->array[0];
+				break;
+			default:
+				entry = ring_buffer_event_data(event);
+				if (*entry != cpu) {
+					KILL_TEST();
+					break;
+				}
+				read++;
+				inc = ((event->type_len + 1) * 4);
+			}
+			if (kill_test)
+				break;
+
+			if (inc <= 0) {
+				KILL_TEST();
+				break;
+			}
+		}
+	}
+	ring_buffer_free_read_page(buffer, bpage);
+
+	if (ret < 0)
+		return EVENT_DROPPED;
+	return EVENT_FOUND;
+}
+
+static void ring_buffer_consumer(void)
+{
+	/* toggle between reading pages and events */
+	read_events ^= 1;
+
+	read = 0;
+	while (!reader_finish && !kill_test) {
+		int found;
+
+		do {
+			int cpu;
+
+			found = 0;
+			for_each_online_cpu(cpu) {
+				enum event_status stat;
+
+				if (read_events)
+					stat = read_event(cpu);
+				else
+					stat = read_page(cpu);
+
+				if (kill_test)
+					break;
+				if (stat == EVENT_FOUND)
+					found = 1;
+			}
+		} while (found && !kill_test);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (reader_finish)
+			break;
+
+		schedule();
+		__set_current_state(TASK_RUNNING);
+	}
+	reader_finish = 0;
+	complete(&read_done);
+}
+
+static void ring_buffer_producer(void)
+{
+	struct timeval start_tv;
+	struct timeval end_tv;
+	unsigned long long time;
+	unsigned long long entries;
+	unsigned long long overruns;
+	unsigned long missed = 0;
+	unsigned long hit = 0;
+	unsigned long avg;
+	int cnt = 0;
+
+	/*
+	 * Hammer the buffer for 10 secs (this may
+	 * make the system stall)
+	 */
+	pr_info("Starting ring buffer hammer\n");
+	do_gettimeofday(&start_tv);
+	do {
+		struct ring_buffer_event *event;
+		int *entry;
+
+		event = ring_buffer_lock_reserve(buffer, 10);
+		if (!event) {
+			missed++;
+		} else {
+			hit++;
+			entry = ring_buffer_event_data(event);
+			*entry = smp_processor_id();
+			ring_buffer_unlock_commit(buffer, event);
+		}
+		do_gettimeofday(&end_tv);
+
+		cnt++;
+		if (consumer && !(cnt % wakeup_interval))
+			wake_up_process(consumer);
+
+#ifndef CONFIG_PREEMPT
+		/*
+		 * If we are a non preempt kernel, the 10 second run will
+		 * stop everything while it runs. Instead, we will call
+		 * cond_resched and also add any time that was lost by a
+		 * rescedule.
+		 *
+		 * Do a cond resched at the same frequency we would wake up
+		 * the reader.
+		 */
+		if (cnt % wakeup_interval)
+			cond_resched();
+#endif
+
+	} while (end_tv.tv_sec < (start_tv.tv_sec + RUN_TIME) && !kill_test);
+	pr_info("End ring buffer hammer\n");
+
+	if (consumer) {
+		/* Init both completions here to avoid races */
+		init_completion(&read_start);
+		init_completion(&read_done);
+		/* the completions must be visible before the finish var */
+		smp_wmb();
+		reader_finish = 1;
+		/* finish var visible before waking up the consumer */
+		smp_wmb();
+		wake_up_process(consumer);
+		wait_for_completion(&read_done);
+	}
+
+	time = end_tv.tv_sec - start_tv.tv_sec;
+	time *= USEC_PER_SEC;
+	time += (long long)((long)end_tv.tv_usec - (long)start_tv.tv_usec);
+
+	entries = ring_buffer_entries(buffer);
+	overruns = ring_buffer_overruns(buffer);
+
+	if (kill_test)
+		pr_info("ERROR!\n");
+	pr_info("Time:     %lld (usecs)\n", time);
+	pr_info("Overruns: %lld\n", overruns);
+	if (disable_reader)
+		pr_info("Read:     (reader disabled)\n");
+	else
+		pr_info("Read:     %ld  (by %s)\n", read,
+			read_events ? "events" : "pages");
+	pr_info("Entries:  %lld\n", entries);
+	pr_info("Total:    %lld\n", entries + overruns + read);
+	pr_info("Missed:   %ld\n", missed);
+	pr_info("Hit:      %ld\n", hit);
+
+	/* Convert time from usecs to millisecs */
+	do_div(time, USEC_PER_MSEC);
+	if (time)
+		hit /= (long)time;
+	else
+		pr_info("TIME IS ZERO??\n");
+
+	pr_info("Entries per millisec: %ld\n", hit);
+
+	if (hit) {
+		/* Calculate the average time in nanosecs */
+		avg = NSEC_PER_MSEC / hit;
+		pr_info("%ld ns per entry\n", avg);
+	}
+
+	if (missed) {
+		if (time)
+			missed /= (long)time;
+
+		pr_info("Total iterations per millisec: %ld\n", hit + missed);
+
+		/* it is possible that hit + missed will overflow and be zero */
+		if (!(hit + missed)) {
+			pr_info("hit + missed overflowed and totalled zero!\n");
+			hit--; /* make it non zero */
+		}
+
+		/* Caculate the average time in nanosecs */
+		avg = NSEC_PER_MSEC / (hit + missed);
+		pr_info("%ld ns per entry\n", avg);
+	}
+}
+
+static void wait_to_die(void)
+{
+	set_current_state(TASK_INTERRUPTIBLE);
+	while (!kthread_should_stop()) {
+		schedule();
+		set_current_state(TASK_INTERRUPTIBLE);
+	}
+	__set_current_state(TASK_RUNNING);
+}
+
+static int ring_buffer_consumer_thread(void *arg)
+{
+	while (!kthread_should_stop() && !kill_test) {
+		complete(&read_start);
+
+		ring_buffer_consumer();
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_stop() || kill_test)
+			break;
+
+		schedule();
+		__set_current_state(TASK_RUNNING);
+	}
+	__set_current_state(TASK_RUNNING);
+
+	if (kill_test)
+		wait_to_die();
+
+	return 0;
+}
+
+static int ring_buffer_producer_thread(void *arg)
+{
+	init_completion(&read_start);
+
+	while (!kthread_should_stop() && !kill_test) {
+		ring_buffer_reset(buffer);
+
+		if (consumer) {
+			smp_wmb();
+			wake_up_process(consumer);
+			wait_for_completion(&read_start);
+		}
+
+		ring_buffer_producer();
+
+		pr_info("Sleeping for 10 secs\n");
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ * SLEEP_TIME);
+		__set_current_state(TASK_RUNNING);
+	}
+
+	if (kill_test)
+		wait_to_die();
+
+	return 0;
+}
+
+static int __init ring_buffer_benchmark_init(void)
+{
+	int ret;
+
+	/* make a one meg buffer in overwite mode */
+	buffer = ring_buffer_alloc(1000000, RB_FL_OVERWRITE);
+	if (!buffer)
+		return -ENOMEM;
+
+	if (!disable_reader) {
+		consumer = kthread_create(ring_buffer_consumer_thread,
+					  NULL, "rb_consumer");
+		ret = PTR_ERR(consumer);
+		if (IS_ERR(consumer))
+			goto out_fail;
+	}
+
+	producer = kthread_run(ring_buffer_producer_thread,
+			       NULL, "rb_producer");
+	ret = PTR_ERR(producer);
+
+	if (IS_ERR(producer))
+		goto out_kill;
+
+	return 0;
+
+ out_kill:
+	if (consumer)
+		kthread_stop(consumer);
+
+ out_fail:
+	ring_buffer_free(buffer);
+	return ret;
+}
+
+static void __exit ring_buffer_benchmark_exit(void)
+{
+	kthread_stop(producer);
+	if (consumer)
+		kthread_stop(consumer);
+	ring_buffer_free(buffer);
+}
+
+module_init(ring_buffer_benchmark_init);
+module_exit(ring_buffer_benchmark_exit);
+
+MODULE_AUTHOR("Steven Rostedt");
+MODULE_DESCRIPTION("ring_buffer_benchmark");
+MODULE_LICENSE("GPL");
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index a884c09006c..8acd9b81a5d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -171,6 +171,13 @@ static struct trace_array	global_trace;
 
 static DEFINE_PER_CPU(struct trace_array_cpu, global_trace_cpu);
 
+int filter_current_check_discard(struct ftrace_event_call *call, void *rec,
+				 struct ring_buffer_event *event)
+{
+	return filter_check_discard(call, rec, global_trace.buffer, event);
+}
+EXPORT_SYMBOL_GPL(filter_current_check_discard);
+
 cycle_t ftrace_now(int cpu)
 {
 	u64 ts;
@@ -255,7 +262,8 @@ static DECLARE_WAIT_QUEUE_HEAD(trace_wait);
 
 /* trace_flags holds trace_options default values */
 unsigned long trace_flags = TRACE_ITER_PRINT_PARENT | TRACE_ITER_PRINTK |
-	TRACE_ITER_ANNOTATE | TRACE_ITER_CONTEXT_INFO | TRACE_ITER_SLEEP_TIME;
+	TRACE_ITER_ANNOTATE | TRACE_ITER_CONTEXT_INFO | TRACE_ITER_SLEEP_TIME |
+	TRACE_ITER_GRAPH_TIME;
 
 /**
  * trace_wake_up - wake up tasks waiting for trace input
@@ -317,6 +325,7 @@ static const char *trace_options[] = {
 	"latency-format",
 	"global-clock",
 	"sleep-time",
+	"graph-time",
 	NULL
 };
 
@@ -402,17 +411,6 @@ static ssize_t trace_seq_to_buffer(struct trace_seq *s, void *buf, size_t cnt)
 	return cnt;
 }
 
-static void
-trace_print_seq(struct seq_file *m, struct trace_seq *s)
-{
-	int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
-
-	s->buffer[len] = 0;
-	seq_puts(m, s->buffer);
-
-	trace_seq_init(s);
-}
-
 /**
  * update_max_tr - snapshot all trace buffers from global_trace to max_tr
  * @tr: tracer
@@ -641,6 +639,16 @@ void tracing_reset_online_cpus(struct trace_array *tr)
 		tracing_reset(tr, cpu);
 }
 
+void tracing_reset_current(int cpu)
+{
+	tracing_reset(&global_trace, cpu);
+}
+
+void tracing_reset_current_online_cpus(void)
+{
+	tracing_reset_online_cpus(&global_trace);
+}
+
 #define SAVED_CMDLINES 128
 #define NO_CMDLINE_MAP UINT_MAX
 static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1];
@@ -800,6 +808,7 @@ void trace_find_cmdline(int pid, char comm[])
 		return;
 	}
 
+	preempt_disable();
 	__raw_spin_lock(&trace_cmdline_lock);
 	map = map_pid_to_cmdline[pid];
 	if (map != NO_CMDLINE_MAP)
@@ -808,6 +817,7 @@ void trace_find_cmdline(int pid, char comm[])
 		strcpy(comm, "<...>");
 
 	__raw_spin_unlock(&trace_cmdline_lock);
+	preempt_enable();
 }
 
 void tracing_record_cmdline(struct task_struct *tsk)
@@ -840,7 +850,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags,
 }
 
 struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
-						    unsigned char type,
+						    int type,
 						    unsigned long len,
 						    unsigned long flags, int pc)
 {
@@ -883,30 +893,40 @@ void trace_buffer_unlock_commit(struct trace_array *tr,
 }
 
 struct ring_buffer_event *
-trace_current_buffer_lock_reserve(unsigned char type, unsigned long len,
+trace_current_buffer_lock_reserve(int type, unsigned long len,
 				  unsigned long flags, int pc)
 {
 	return trace_buffer_lock_reserve(&global_trace,
 					 type, len, flags, pc);
 }
+EXPORT_SYMBOL_GPL(trace_current_buffer_lock_reserve);
 
 void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
 					unsigned long flags, int pc)
 {
-	return __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 1);
+	__trace_buffer_unlock_commit(&global_trace, event, flags, pc, 1);
 }
+EXPORT_SYMBOL_GPL(trace_current_buffer_unlock_commit);
 
 void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
 					unsigned long flags, int pc)
 {
-	return __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 0);
+	__trace_buffer_unlock_commit(&global_trace, event, flags, pc, 0);
+}
+EXPORT_SYMBOL_GPL(trace_nowake_buffer_unlock_commit);
+
+void trace_current_buffer_discard_commit(struct ring_buffer_event *event)
+{
+	ring_buffer_discard_commit(global_trace.buffer, event);
 }
+EXPORT_SYMBOL_GPL(trace_current_buffer_discard_commit);
 
 void
 trace_function(struct trace_array *tr,
 	       unsigned long ip, unsigned long parent_ip, unsigned long flags,
 	       int pc)
 {
+	struct ftrace_event_call *call = &event_function;
 	struct ring_buffer_event *event;
 	struct ftrace_entry *entry;
 
@@ -921,7 +941,9 @@ trace_function(struct trace_array *tr,
 	entry	= ring_buffer_event_data(event);
 	entry->ip			= ip;
 	entry->parent_ip		= parent_ip;
-	ring_buffer_unlock_commit(tr->buffer, event);
+
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 }
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -930,6 +952,7 @@ static int __trace_graph_entry(struct trace_array *tr,
 				unsigned long flags,
 				int pc)
 {
+	struct ftrace_event_call *call = &event_funcgraph_entry;
 	struct ring_buffer_event *event;
 	struct ftrace_graph_ent_entry *entry;
 
@@ -942,7 +965,8 @@ static int __trace_graph_entry(struct trace_array *tr,
 		return 0;
 	entry	= ring_buffer_event_data(event);
 	entry->graph_ent			= *trace;
-	ring_buffer_unlock_commit(global_trace.buffer, event);
+	if (!filter_current_check_discard(call, entry, event))
+		ring_buffer_unlock_commit(global_trace.buffer, event);
 
 	return 1;
 }
@@ -952,6 +976,7 @@ static void __trace_graph_return(struct trace_array *tr,
 				unsigned long flags,
 				int pc)
 {
+	struct ftrace_event_call *call = &event_funcgraph_exit;
 	struct ring_buffer_event *event;
 	struct ftrace_graph_ret_entry *entry;
 
@@ -964,7 +989,8 @@ static void __trace_graph_return(struct trace_array *tr,
 		return;
 	entry	= ring_buffer_event_data(event);
 	entry->ret				= *trace;
-	ring_buffer_unlock_commit(global_trace.buffer, event);
+	if (!filter_current_check_discard(call, entry, event))
+		ring_buffer_unlock_commit(global_trace.buffer, event);
 }
 #endif
 
@@ -982,6 +1008,7 @@ static void __ftrace_trace_stack(struct trace_array *tr,
 				 int skip, int pc)
 {
 #ifdef CONFIG_STACKTRACE
+	struct ftrace_event_call *call = &event_kernel_stack;
 	struct ring_buffer_event *event;
 	struct stack_entry *entry;
 	struct stack_trace trace;
@@ -999,7 +1026,8 @@ static void __ftrace_trace_stack(struct trace_array *tr,
 	trace.entries		= entry->caller;
 
 	save_stack_trace(&trace);
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 #endif
 }
 
@@ -1024,6 +1052,7 @@ static void ftrace_trace_userstack(struct trace_array *tr,
 				   unsigned long flags, int pc)
 {
 #ifdef CONFIG_STACKTRACE
+	struct ftrace_event_call *call = &event_user_stack;
 	struct ring_buffer_event *event;
 	struct userstack_entry *entry;
 	struct stack_trace trace;
@@ -1045,7 +1074,8 @@ static void ftrace_trace_userstack(struct trace_array *tr,
 	trace.entries		= entry->caller;
 
 	save_stack_trace_user(&trace);
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 #endif
 }
 
@@ -1089,6 +1119,7 @@ tracing_sched_switch_trace(struct trace_array *tr,
 			   struct task_struct *next,
 			   unsigned long flags, int pc)
 {
+	struct ftrace_event_call *call = &event_context_switch;
 	struct ring_buffer_event *event;
 	struct ctx_switch_entry *entry;
 
@@ -1104,7 +1135,9 @@ tracing_sched_switch_trace(struct trace_array *tr,
 	entry->next_prio		= next->prio;
 	entry->next_state		= next->state;
 	entry->next_cpu	= task_cpu(next);
-	trace_buffer_unlock_commit(tr, event, flags, pc);
+
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		trace_buffer_unlock_commit(tr, event, flags, pc);
 }
 
 void
@@ -1113,6 +1146,7 @@ tracing_sched_wakeup_trace(struct trace_array *tr,
 			   struct task_struct *curr,
 			   unsigned long flags, int pc)
 {
+	struct ftrace_event_call *call = &event_wakeup;
 	struct ring_buffer_event *event;
 	struct ctx_switch_entry *entry;
 
@@ -1129,7 +1163,8 @@ tracing_sched_wakeup_trace(struct trace_array *tr,
 	entry->next_state		= wakee->state;
 	entry->next_cpu			= task_cpu(wakee);
 
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 	ftrace_trace_stack(tr, flags, 6, pc);
 	ftrace_trace_userstack(tr, flags, pc);
 }
@@ -1230,11 +1265,13 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
 		(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
 	static u32 trace_buf[TRACE_BUF_SIZE];
 
+	struct ftrace_event_call *call = &event_bprint;
 	struct ring_buffer_event *event;
 	struct trace_array *tr = &global_trace;
 	struct trace_array_cpu *data;
 	struct bprint_entry *entry;
 	unsigned long flags;
+	int disable;
 	int resched;
 	int cpu, len = 0, size, pc;
 
@@ -1249,7 +1286,8 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
 	cpu = raw_smp_processor_id();
 	data = tr->data[cpu];
 
-	if (unlikely(atomic_read(&data->disabled)))
+	disable = atomic_inc_return(&data->disabled);
+	if (unlikely(disable != 1))
 		goto out;
 
 	/* Lockdep uses trace_printk for lock tracing */
@@ -1269,13 +1307,15 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
 	entry->fmt			= fmt;
 
 	memcpy(entry->buf, trace_buf, sizeof(u32) * len);
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 
 out_unlock:
 	__raw_spin_unlock(&trace_buf_lock);
 	local_irq_restore(flags);
 
 out:
+	atomic_dec_return(&data->disabled);
 	ftrace_preempt_enable(resched);
 	unpause_graph_tracing();
 
@@ -1288,12 +1328,14 @@ int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
 	static raw_spinlock_t trace_buf_lock = __RAW_SPIN_LOCK_UNLOCKED;
 	static char trace_buf[TRACE_BUF_SIZE];
 
+	struct ftrace_event_call *call = &event_print;
 	struct ring_buffer_event *event;
 	struct trace_array *tr = &global_trace;
 	struct trace_array_cpu *data;
 	int cpu, len = 0, size, pc;
 	struct print_entry *entry;
 	unsigned long irq_flags;
+	int disable;
 
 	if (tracing_disabled || tracing_selftest_running)
 		return 0;
@@ -1303,7 +1345,8 @@ int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
 	cpu = raw_smp_processor_id();
 	data = tr->data[cpu];
 
-	if (unlikely(atomic_read(&data->disabled)))
+	disable = atomic_inc_return(&data->disabled);
+	if (unlikely(disable != 1))
 		goto out;
 
 	pause_graph_tracing();
@@ -1323,13 +1366,15 @@ int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
 
 	memcpy(&entry->buf, trace_buf, len);
 	entry->buf[len] = 0;
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 
  out_unlock:
 	__raw_spin_unlock(&trace_buf_lock);
 	raw_local_irq_restore(irq_flags);
 	unpause_graph_tracing();
  out:
+	atomic_dec_return(&data->disabled);
 	preempt_enable_notrace();
 
 	return len;
@@ -1526,12 +1571,14 @@ static void *s_start(struct seq_file *m, loff_t *pos)
 		p = s_next(m, p, &l);
 	}
 
+	trace_event_read_lock();
 	return p;
 }
 
 static void s_stop(struct seq_file *m, void *p)
 {
 	atomic_dec(&trace_record_cmdline_disabled);
+	trace_event_read_unlock();
 }
 
 static void print_lat_help_header(struct seq_file *m)
@@ -1774,6 +1821,7 @@ static int trace_empty(struct trace_iterator *iter)
 	return 1;
 }
 
+/*  Called with trace_event_read_lock() held. */
 static enum print_line_t print_trace_line(struct trace_iterator *iter)
 {
 	enum print_line_t ret;
@@ -2380,7 +2428,7 @@ static const char readme_msg[] =
 	"# echo print-parent > /debug/tracing/trace_options\n"
 	"# echo 1 > /debug/tracing/tracing_enabled\n"
 	"# cat /debug/tracing/trace > /tmp/trace.txt\n"
-	"echo 0 > /debug/tracing/tracing_enabled\n"
+	"# echo 0 > /debug/tracing/tracing_enabled\n"
 ;
 
 static ssize_t
@@ -2397,6 +2445,56 @@ static const struct file_operations tracing_readme_fops = {
 };
 
 static ssize_t
+tracing_saved_cmdlines_read(struct file *file, char __user *ubuf,
+				size_t cnt, loff_t *ppos)
+{
+	char *buf_comm;
+	char *file_buf;
+	char *buf;
+	int len = 0;
+	int pid;
+	int i;
+
+	file_buf = kmalloc(SAVED_CMDLINES*(16+TASK_COMM_LEN), GFP_KERNEL);
+	if (!file_buf)
+		return -ENOMEM;
+
+	buf_comm = kmalloc(TASK_COMM_LEN, GFP_KERNEL);
+	if (!buf_comm) {
+		kfree(file_buf);
+		return -ENOMEM;
+	}
+
+	buf = file_buf;
+
+	for (i = 0; i < SAVED_CMDLINES; i++) {
+		int r;
+
+		pid = map_cmdline_to_pid[i];
+		if (pid == -1 || pid == NO_CMDLINE_MAP)
+			continue;
+
+		trace_find_cmdline(pid, buf_comm);
+		r = sprintf(buf, "%d %s\n", pid, buf_comm);
+		buf += r;
+		len += r;
+	}
+
+	len = simple_read_from_buffer(ubuf, cnt, ppos,
+				      file_buf, len);
+
+	kfree(file_buf);
+	kfree(buf_comm);
+
+	return len;
+}
+
+static const struct file_operations tracing_saved_cmdlines_fops = {
+    .open       = tracing_open_generic,
+    .read       = tracing_saved_cmdlines_read,
+};
+
+static ssize_t
 tracing_ctrl_read(struct file *filp, char __user *ubuf,
 		  size_t cnt, loff_t *ppos)
 {
@@ -2728,6 +2826,9 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp)
 	/* trace pipe does not show start of buffer */
 	cpumask_setall(iter->started);
 
+	if (trace_flags & TRACE_ITER_LATENCY_FMT)
+		iter->iter_flags |= TRACE_FILE_LAT_FMT;
+
 	iter->cpu_file = cpu_file;
 	iter->tr = &global_trace;
 	mutex_init(&iter->mutex);
@@ -2915,6 +3016,7 @@ waitagain:
 	       offsetof(struct trace_iterator, seq));
 	iter->pos = -1;
 
+	trace_event_read_lock();
 	while (find_next_entry_inc(iter) != NULL) {
 		enum print_line_t ret;
 		int len = iter->seq.len;
@@ -2931,6 +3033,7 @@ waitagain:
 		if (iter->seq.len >= cnt)
 			break;
 	}
+	trace_event_read_unlock();
 
 	/* Now copy what we have to the user */
 	sret = trace_seq_to_user(&iter->seq, ubuf, cnt);
@@ -3053,6 +3156,8 @@ static ssize_t tracing_splice_read_pipe(struct file *filp,
 		goto out_err;
 	}
 
+	trace_event_read_lock();
+
 	/* Fill as many pages as possible. */
 	for (i = 0, rem = len; i < PIPE_BUFFERS && rem; i++) {
 		pages[i] = alloc_page(GFP_KERNEL);
@@ -3075,6 +3180,7 @@ static ssize_t tracing_splice_read_pipe(struct file *filp,
 		trace_seq_init(&iter->seq);
 	}
 
+	trace_event_read_unlock();
 	mutex_unlock(&iter->mutex);
 
 	spd.nr_pages = i;
@@ -3425,7 +3531,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos,
 		.spd_release	= buffer_spd_release,
 	};
 	struct buffer_ref *ref;
-	int size, i;
+	int entries, size, i;
 	size_t ret;
 
 	if (*ppos & (PAGE_SIZE - 1)) {
@@ -3440,7 +3546,9 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos,
 		len &= PAGE_MASK;
 	}
 
-	for (i = 0; i < PIPE_BUFFERS && len; i++, len -= PAGE_SIZE) {
+	entries = ring_buffer_entries_cpu(info->tr->buffer, info->cpu);
+
+	for (i = 0; i < PIPE_BUFFERS && len && entries; i++, len -= PAGE_SIZE) {
 		struct page *page;
 		int r;
 
@@ -3457,7 +3565,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos,
 		}
 
 		r = ring_buffer_read_page(ref->buffer, &ref->page,
-					  len, info->cpu, 0);
+					  len, info->cpu, 1);
 		if (r < 0) {
 			ring_buffer_free_read_page(ref->buffer,
 						   ref->page);
@@ -3481,6 +3589,8 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos,
 		spd.partial[i].private = (unsigned long)ref;
 		spd.nr_pages++;
 		*ppos += PAGE_SIZE;
+
+		entries = ring_buffer_entries_cpu(info->tr->buffer, info->cpu);
 	}
 
 	spd.nr_pages = i;
@@ -3508,6 +3618,45 @@ static const struct file_operations tracing_buffers_fops = {
 	.llseek		= no_llseek,
 };
 
+static ssize_t
+tracing_stats_read(struct file *filp, char __user *ubuf,
+		   size_t count, loff_t *ppos)
+{
+	unsigned long cpu = (unsigned long)filp->private_data;
+	struct trace_array *tr = &global_trace;
+	struct trace_seq *s;
+	unsigned long cnt;
+
+	s = kmalloc(sizeof(*s), GFP_ATOMIC);
+	if (!s)
+		return ENOMEM;
+
+	trace_seq_init(s);
+
+	cnt = ring_buffer_entries_cpu(tr->buffer, cpu);
+	trace_seq_printf(s, "entries: %ld\n", cnt);
+
+	cnt = ring_buffer_overrun_cpu(tr->buffer, cpu);
+	trace_seq_printf(s, "overrun: %ld\n", cnt);
+
+	cnt = ring_buffer_commit_overrun_cpu(tr->buffer, cpu);
+	trace_seq_printf(s, "commit overrun: %ld\n", cnt);
+
+	cnt = ring_buffer_nmi_dropped_cpu(tr->buffer, cpu);
+	trace_seq_printf(s, "nmi dropped: %ld\n", cnt);
+
+	count = simple_read_from_buffer(ubuf, count, ppos, s->buffer, s->len);
+
+	kfree(s);
+
+	return count;
+}
+
+static const struct file_operations tracing_stats_fops = {
+	.open		= tracing_open_generic,
+	.read		= tracing_stats_read,
+};
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 int __weak ftrace_arch_read_dyn_info(char *buf, int size)
@@ -3597,7 +3746,7 @@ struct dentry *tracing_dentry_percpu(void)
 static void tracing_init_debugfs_percpu(long cpu)
 {
 	struct dentry *d_percpu = tracing_dentry_percpu();
-	struct dentry *entry, *d_cpu;
+	struct dentry *d_cpu;
 	/* strlen(cpu) + MAX(log10(cpu)) + '\0' */
 	char cpu_dir[7];
 
@@ -3612,21 +3761,18 @@ static void tracing_init_debugfs_percpu(long cpu)
 	}
 
 	/* per cpu trace_pipe */
-	entry = debugfs_create_file("trace_pipe", 0444, d_cpu,
-				(void *) cpu, &tracing_pipe_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'trace_pipe' entry\n");
+	trace_create_file("trace_pipe", 0444, d_cpu,
+			(void *) cpu, &tracing_pipe_fops);
 
 	/* per cpu trace */
-	entry = debugfs_create_file("trace", 0644, d_cpu,
-				(void *) cpu, &tracing_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'trace' entry\n");
+	trace_create_file("trace", 0644, d_cpu,
+			(void *) cpu, &tracing_fops);
+
+	trace_create_file("trace_pipe_raw", 0444, d_cpu,
+			(void *) cpu, &tracing_buffers_fops);
 
-	entry = debugfs_create_file("trace_pipe_raw", 0444, d_cpu,
-				    (void *) cpu, &tracing_buffers_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'trace_pipe_raw' entry\n");
+	trace_create_file("stats", 0444, d_cpu,
+			(void *) cpu, &tracing_stats_fops);
 }
 
 #ifdef CONFIG_FTRACE_SELFTEST
@@ -3782,6 +3928,22 @@ static const struct file_operations trace_options_core_fops = {
 	.write = trace_options_core_write,
 };
 
+struct dentry *trace_create_file(const char *name,
+				 mode_t mode,
+				 struct dentry *parent,
+				 void *data,
+				 const struct file_operations *fops)
+{
+	struct dentry *ret;
+
+	ret = debugfs_create_file(name, mode, parent, data, fops);
+	if (!ret)
+		pr_warning("Could not create debugfs '%s' entry\n", name);
+
+	return ret;
+}
+
+
 static struct dentry *trace_options_init_dentry(void)
 {
 	struct dentry *d_tracer;
@@ -3809,7 +3971,6 @@ create_trace_option_file(struct trace_option_dentry *topt,
 			 struct tracer_opt *opt)
 {
 	struct dentry *t_options;
-	struct dentry *entry;
 
 	t_options = trace_options_init_dentry();
 	if (!t_options)
@@ -3818,11 +3979,9 @@ create_trace_option_file(struct trace_option_dentry *topt,
 	topt->flags = flags;
 	topt->opt = opt;
 
-	entry = debugfs_create_file(opt->name, 0644, t_options, topt,
+	topt->entry = trace_create_file(opt->name, 0644, t_options, topt,
 				    &trace_options_fops);
 
-	topt->entry = entry;
-
 }
 
 static struct trace_option_dentry *
@@ -3877,123 +4036,84 @@ static struct dentry *
 create_trace_option_core_file(const char *option, long index)
 {
 	struct dentry *t_options;
-	struct dentry *entry;
 
 	t_options = trace_options_init_dentry();
 	if (!t_options)
 		return NULL;
 
-	entry = debugfs_create_file(option, 0644, t_options, (void *)index,
+	return trace_create_file(option, 0644, t_options, (void *)index,
 				    &trace_options_core_fops);
-
-	return entry;
 }
 
 static __init void create_trace_options_dir(void)
 {
 	struct dentry *t_options;
-	struct dentry *entry;
 	int i;
 
 	t_options = trace_options_init_dentry();
 	if (!t_options)
 		return;
 
-	for (i = 0; trace_options[i]; i++) {
-		entry = create_trace_option_core_file(trace_options[i], i);
-		if (!entry)
-			pr_warning("Could not create debugfs %s entry\n",
-				   trace_options[i]);
-	}
+	for (i = 0; trace_options[i]; i++)
+		create_trace_option_core_file(trace_options[i], i);
 }
 
 static __init int tracer_init_debugfs(void)
 {
 	struct dentry *d_tracer;
-	struct dentry *entry;
 	int cpu;
 
 	d_tracer = tracing_init_dentry();
 
-	entry = debugfs_create_file("tracing_enabled", 0644, d_tracer,
-				    &global_trace, &tracing_ctrl_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'tracing_enabled' entry\n");
+	trace_create_file("tracing_enabled", 0644, d_tracer,
+			&global_trace, &tracing_ctrl_fops);
 
-	entry = debugfs_create_file("trace_options", 0644, d_tracer,
-				    NULL, &tracing_iter_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'trace_options' entry\n");
+	trace_create_file("trace_options", 0644, d_tracer,
+			NULL, &tracing_iter_fops);
 
-	create_trace_options_dir();
+	trace_create_file("tracing_cpumask", 0644, d_tracer,
+			NULL, &tracing_cpumask_fops);
+
+	trace_create_file("trace", 0644, d_tracer,
+			(void *) TRACE_PIPE_ALL_CPU, &tracing_fops);
 
-	entry = debugfs_create_file("tracing_cpumask", 0644, d_tracer,
-				    NULL, &tracing_cpumask_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'tracing_cpumask' entry\n");
-
-	entry = debugfs_create_file("trace", 0644, d_tracer,
-				 (void *) TRACE_PIPE_ALL_CPU, &tracing_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'trace' entry\n");
-
-	entry = debugfs_create_file("available_tracers", 0444, d_tracer,
-				    &global_trace, &show_traces_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'available_tracers' entry\n");
-
-	entry = debugfs_create_file("current_tracer", 0444, d_tracer,
-				    &global_trace, &set_tracer_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'current_tracer' entry\n");
-
-	entry = debugfs_create_file("tracing_max_latency", 0644, d_tracer,
-				    &tracing_max_latency,
-				    &tracing_max_lat_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'tracing_max_latency' entry\n");
-
-	entry = debugfs_create_file("tracing_thresh", 0644, d_tracer,
-				    &tracing_thresh, &tracing_max_lat_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'tracing_thresh' entry\n");
-	entry = debugfs_create_file("README", 0644, d_tracer,
-				    NULL, &tracing_readme_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'README' entry\n");
-
-	entry = debugfs_create_file("trace_pipe", 0444, d_tracer,
+	trace_create_file("available_tracers", 0444, d_tracer,
+			&global_trace, &show_traces_fops);
+
+	trace_create_file("current_tracer", 0644, d_tracer,
+			&global_trace, &set_tracer_fops);
+
+	trace_create_file("tracing_max_latency", 0644, d_tracer,
+			&tracing_max_latency, &tracing_max_lat_fops);
+
+	trace_create_file("tracing_thresh", 0644, d_tracer,
+			&tracing_thresh, &tracing_max_lat_fops);
+
+	trace_create_file("README", 0444, d_tracer,
+			NULL, &tracing_readme_fops);
+
+	trace_create_file("trace_pipe", 0444, d_tracer,
 			(void *) TRACE_PIPE_ALL_CPU, &tracing_pipe_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'trace_pipe' entry\n");
-
-	entry = debugfs_create_file("buffer_size_kb", 0644, d_tracer,
-				    &global_trace, &tracing_entries_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'buffer_size_kb' entry\n");
-
-	entry = debugfs_create_file("trace_marker", 0220, d_tracer,
-				    NULL, &tracing_mark_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'trace_marker' entry\n");
+
+	trace_create_file("buffer_size_kb", 0644, d_tracer,
+			&global_trace, &tracing_entries_fops);
+
+	trace_create_file("trace_marker", 0220, d_tracer,
+			NULL, &tracing_mark_fops);
+
+	trace_create_file("saved_cmdlines", 0444, d_tracer,
+			NULL, &tracing_saved_cmdlines_fops);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-	entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer,
-				    &ftrace_update_tot_cnt,
-				    &tracing_dyn_info_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'dyn_ftrace_total_info' entry\n");
+	trace_create_file("dyn_ftrace_total_info", 0444, d_tracer,
+			&ftrace_update_tot_cnt, &tracing_dyn_info_fops);
 #endif
 #ifdef CONFIG_SYSPROF_TRACER
 	init_tracer_sysprof_debugfs(d_tracer);
 #endif
 
+	create_trace_options_dir();
+
 	for_each_tracing_cpu(cpu)
 		tracing_init_debugfs_percpu(cpu);
 
@@ -4064,7 +4184,8 @@ trace_printk_seq(struct trace_seq *s)
 
 static void __ftrace_dump(bool disable_tracing)
 {
-	static DEFINE_SPINLOCK(ftrace_dump_lock);
+	static raw_spinlock_t ftrace_dump_lock =
+		(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
 	/* use static because iter can be a bit big for the stack */
 	static struct trace_iterator iter;
 	unsigned int old_userobj;
@@ -4073,7 +4194,8 @@ static void __ftrace_dump(bool disable_tracing)
 	int cnt = 0, cpu;
 
 	/* only one dump */
-	spin_lock_irqsave(&ftrace_dump_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&ftrace_dump_lock);
 	if (dump_ran)
 		goto out;
 
@@ -4145,7 +4267,8 @@ static void __ftrace_dump(bool disable_tracing)
 	}
 
  out:
-	spin_unlock_irqrestore(&ftrace_dump_lock, flags);
+	__raw_spin_unlock(&ftrace_dump_lock);
+	local_irq_restore(flags);
 }
 
 /* By default: disable tracing after the dump */
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index e685ac2b2ba..6e735d4771f 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -9,9 +9,12 @@
 #include <linux/mmiotrace.h>
 #include <linux/ftrace.h>
 #include <trace/boot.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
 #include <trace/power.h>
 
+#include <linux/trace_seq.h>
+#include <linux/ftrace_event.h>
+
 enum trace_type {
 	__TRACE_FIRST_TYPE = 0,
 
@@ -42,20 +45,6 @@ enum trace_type {
 };
 
 /*
- * The trace entry - the most basic unit of tracing. This is what
- * is printed in the end as a single line in the trace output, such as:
- *
- *     bash-15816 [01]   235.197585: idle_cpu <- irq_enter
- */
-struct trace_entry {
-	unsigned char		type;
-	unsigned char		flags;
-	unsigned char		preempt_count;
-	int			pid;
-	int			tgid;
-};
-
-/*
  * Function trace entry - function address and parent function addres:
  */
 struct ftrace_entry {
@@ -263,8 +252,6 @@ struct trace_array_cpu {
 	char			comm[TASK_COMM_LEN];
 };
 
-struct trace_iterator;
-
 /*
  * The trace array - an array of per-CPU trace arrays. This is the
  * highest level data structure that individual tracers deal with.
@@ -339,15 +326,6 @@ extern void __ftrace_bad_type(void);
 		__ftrace_bad_type();					\
 	} while (0)
 
-/* Return values for print_line callback */
-enum print_line_t {
-	TRACE_TYPE_PARTIAL_LINE	= 0,	/* Retry after flushing the seq */
-	TRACE_TYPE_HANDLED	= 1,
-	TRACE_TYPE_UNHANDLED	= 2,	/* Relay to other output functions */
-	TRACE_TYPE_NO_CONSUME	= 3	/* Handled but ask to not consume */
-};
-
-
 /*
  * An option specific to a tracer. This is a boolean value.
  * The bit is the bit index that sets its value on the
@@ -423,60 +401,30 @@ struct tracer {
 	struct tracer_stat	*stats;
 };
 
-struct trace_seq {
-	unsigned char		buffer[PAGE_SIZE];
-	unsigned int		len;
-	unsigned int		readpos;
-};
-
-static inline void
-trace_seq_init(struct trace_seq *s)
-{
-	s->len = 0;
-	s->readpos = 0;
-}
-
 
 #define TRACE_PIPE_ALL_CPU	-1
 
-/*
- * Trace iterator - used by printout routines who present trace
- * results to users and which routines might sleep, etc:
- */
-struct trace_iterator {
-	struct trace_array	*tr;
-	struct tracer		*trace;
-	void			*private;
-	int			cpu_file;
-	struct mutex		mutex;
-	struct ring_buffer_iter	*buffer_iter[NR_CPUS];
-
-	/* The below is zeroed out in pipe_read */
-	struct trace_seq	seq;
-	struct trace_entry	*ent;
-	int			cpu;
-	u64			ts;
-
-	unsigned long		iter_flags;
-	loff_t			pos;
-	long			idx;
-
-	cpumask_var_t		started;
-};
-
 int tracer_init(struct tracer *t, struct trace_array *tr);
 int tracing_is_enabled(void);
 void trace_wake_up(void);
 void tracing_reset(struct trace_array *tr, int cpu);
 void tracing_reset_online_cpus(struct trace_array *tr);
+void tracing_reset_current(int cpu);
+void tracing_reset_current_online_cpus(void);
 int tracing_open_generic(struct inode *inode, struct file *filp);
+struct dentry *trace_create_file(const char *name,
+				 mode_t mode,
+				 struct dentry *parent,
+				 void *data,
+				 const struct file_operations *fops);
+
 struct dentry *tracing_init_dentry(void);
 void init_tracer_sysprof_debugfs(struct dentry *d_tracer);
 
 struct ring_buffer_event;
 
 struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
-						    unsigned char type,
+						    int type,
 						    unsigned long len,
 						    unsigned long flags,
 						    int pc);
@@ -484,14 +432,6 @@ void trace_buffer_unlock_commit(struct trace_array *tr,
 				struct ring_buffer_event *event,
 				unsigned long flags, int pc);
 
-struct ring_buffer_event *
-trace_current_buffer_lock_reserve(unsigned char type, unsigned long len,
-				  unsigned long flags, int pc);
-void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
-					unsigned long flags, int pc);
-void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
-					unsigned long flags, int pc);
-
 struct trace_entry *tracing_get_trace_entry(struct trace_array *tr,
 						struct trace_array_cpu *data);
 
@@ -514,7 +454,6 @@ void tracing_sched_switch_trace(struct trace_array *tr,
 				struct task_struct *prev,
 				struct task_struct *next,
 				unsigned long flags, int pc);
-void tracing_record_cmdline(struct task_struct *tsk);
 
 void tracing_sched_wakeup_trace(struct trace_array *tr,
 				struct task_struct *wakee,
@@ -599,6 +538,8 @@ extern int trace_selftest_startup_sysprof(struct tracer *trace,
 					       struct trace_array *tr);
 extern int trace_selftest_startup_branch(struct tracer *trace,
 					 struct trace_array *tr);
+extern int trace_selftest_startup_hw_branches(struct tracer *trace,
+					      struct trace_array *tr);
 #endif /* CONFIG_FTRACE_STARTUP_TEST */
 
 extern void *head_page(struct trace_array_cpu *data);
@@ -613,6 +554,8 @@ extern unsigned long trace_flags;
 /* Standard output formatting function used for function return traces */
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 extern enum print_line_t print_graph_function(struct trace_iterator *iter);
+extern enum print_line_t
+trace_print_graph_duration(unsigned long long duration, struct trace_seq *s);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 /* TODO: make this variable */
@@ -644,7 +587,6 @@ static inline int ftrace_graph_addr(unsigned long addr)
 	return 1;
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */
-
 #else /* CONFIG_FUNCTION_GRAPH_TRACER */
 static inline enum print_line_t
 print_graph_function(struct trace_iterator *iter)
@@ -692,6 +634,7 @@ enum trace_iterator_flags {
 	TRACE_ITER_LATENCY_FMT		= 0x40000,
 	TRACE_ITER_GLOBAL_CLK		= 0x80000,
 	TRACE_ITER_SLEEP_TIME		= 0x100000,
+	TRACE_ITER_GRAPH_TIME		= 0x200000,
 };
 
 /*
@@ -790,103 +733,113 @@ struct ftrace_event_field {
 	char			*type;
 	int			offset;
 	int			size;
+	int			is_signed;
 };
 
-struct ftrace_event_call {
-	char			*name;
-	char			*system;
-	struct dentry		*dir;
-	int			enabled;
-	int			(*regfunc)(void);
-	void			(*unregfunc)(void);
-	int			id;
-	int			(*raw_init)(void);
-	int			(*show_format)(struct trace_seq *s);
-	int			(*define_fields)(void);
-	struct list_head	fields;
+struct event_filter {
+	int			n_preds;
 	struct filter_pred	**preds;
-
-#ifdef CONFIG_EVENT_PROFILE
-	atomic_t	profile_count;
-	int		(*profile_enable)(struct ftrace_event_call *);
-	void		(*profile_disable)(struct ftrace_event_call *);
-#endif
+	char			*filter_string;
 };
 
 struct event_subsystem {
 	struct list_head	list;
 	const char		*name;
 	struct dentry		*entry;
-	struct filter_pred	**preds;
+	void			*filter;
 };
 
-#define events_for_each(event)						\
-	for (event = __start_ftrace_events;				\
-	     (unsigned long)event < (unsigned long)__stop_ftrace_events; \
-	     event++)
-
-#define MAX_FILTER_PRED 8
-
 struct filter_pred;
 
-typedef int (*filter_pred_fn_t) (struct filter_pred *pred, void *event);
+typedef int (*filter_pred_fn_t) (struct filter_pred *pred, void *event,
+				 int val1, int val2);
 
 struct filter_pred {
 	filter_pred_fn_t fn;
 	u64 val;
-	char *str_val;
+	char str_val[MAX_FILTER_STR_VAL];
 	int str_len;
 	char *field_name;
 	int offset;
 	int not;
-	int or;
-	int compound;
-	int clear;
+	int op;
+	int pop_n;
 };
 
-int trace_define_field(struct ftrace_event_call *call, char *type,
-		       char *name, int offset, int size);
-extern void filter_free_pred(struct filter_pred *pred);
-extern void filter_print_preds(struct filter_pred **preds,
+extern void print_event_filter(struct ftrace_event_call *call,
 			       struct trace_seq *s);
-extern int filter_parse(char **pbuf, struct filter_pred *pred);
-extern int filter_add_pred(struct ftrace_event_call *call,
-			   struct filter_pred *pred);
-extern void filter_free_preds(struct ftrace_event_call *call);
-extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
-extern void filter_free_subsystem_preds(struct event_subsystem *system);
-extern int filter_add_subsystem_pred(struct event_subsystem *system,
-				     struct filter_pred *pred);
-
-void event_trace_printk(unsigned long ip, const char *fmt, ...);
-extern struct ftrace_event_call __start_ftrace_events[];
-extern struct ftrace_event_call __stop_ftrace_events[];
-
-#define for_each_event(event)						\
-	for (event = __start_ftrace_events;				\
-	     (unsigned long)event < (unsigned long)__stop_ftrace_events; \
-	     event++)
+extern int apply_event_filter(struct ftrace_event_call *call,
+			      char *filter_string);
+extern int apply_subsystem_event_filter(struct event_subsystem *system,
+					char *filter_string);
+extern void print_subsystem_event_filter(struct event_subsystem *system,
+					 struct trace_seq *s);
+
+static inline int
+filter_check_discard(struct ftrace_event_call *call, void *rec,
+		     struct ring_buffer *buffer,
+		     struct ring_buffer_event *event)
+{
+	if (unlikely(call->filter_active) && !filter_match_preds(call, rec)) {
+		ring_buffer_discard_commit(buffer, event);
+		return 1;
+	}
+
+	return 0;
+}
+
+#define DEFINE_COMPARISON_PRED(type)					\
+static int filter_pred_##type(struct filter_pred *pred, void *event,	\
+			      int val1, int val2)			\
+{									\
+	type *addr = (type *)(event + pred->offset);			\
+	type val = (type)pred->val;					\
+	int match = 0;							\
+									\
+	switch (pred->op) {						\
+	case OP_LT:							\
+		match = (*addr < val);					\
+		break;							\
+	case OP_LE:							\
+		match = (*addr <= val);					\
+		break;							\
+	case OP_GT:							\
+		match = (*addr > val);					\
+		break;							\
+	case OP_GE:							\
+		match = (*addr >= val);					\
+		break;							\
+	default:							\
+		break;							\
+	}								\
+									\
+	return match;							\
+}
+
+#define DEFINE_EQUALITY_PRED(size)					\
+static int filter_pred_##size(struct filter_pred *pred, void *event,	\
+			      int val1, int val2)			\
+{									\
+	u##size *addr = (u##size *)(event + pred->offset);		\
+	u##size val = (u##size)pred->val;				\
+	int match;							\
+									\
+	match = (val == *addr) ^ pred->not;				\
+									\
+	return match;							\
+}
+
+extern struct mutex event_mutex;
+extern struct list_head ftrace_events;
 
 extern const char *__start___trace_bprintk_fmt[];
 extern const char *__stop___trace_bprintk_fmt[];
 
-/*
- * The double __builtin_constant_p is because gcc will give us an error
- * if we try to allocate the static variable to fmt if it is not a
- * constant. Even with the outer if statement optimizing out.
- */
-#define event_trace_printk(ip, fmt, args...)				\
-do {									\
-	__trace_printk_check_format(fmt, ##args);			\
-	tracing_record_cmdline(current);				\
-	if (__builtin_constant_p(fmt)) {				\
-		static const char *trace_printk_fmt			\
-		  __attribute__((section("__trace_printk_fmt"))) =	\
-			__builtin_constant_p(fmt) ? fmt : NULL;		\
-									\
-		__trace_bprintk(ip, trace_printk_fmt, ##args);		\
-	} else								\
-		__trace_printk(ip, fmt, ##args);			\
-} while (0)
+#undef TRACE_EVENT_FORMAT
+#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
+	extern struct ftrace_event_call event_##call;
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, tpfmt)
+#include "trace_event_types.h"
 
 #endif /* _LINUX_KERNEL_TRACE_H */
diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c
index 7a30fc4c364..a29ef23ffb4 100644
--- a/kernel/trace/trace_boot.c
+++ b/kernel/trace/trace_boot.c
@@ -9,6 +9,7 @@
 #include <linux/debugfs.h>
 #include <linux/ftrace.h>
 #include <linux/kallsyms.h>
+#include <linux/time.h>
 
 #include "trace.h"
 #include "trace_output.h"
@@ -67,7 +68,7 @@ initcall_call_print_line(struct trace_iterator *iter)
 	trace_assign_type(field, entry);
 	call = &field->boot_call;
 	ts = iter->ts;
-	nsec_rem = do_div(ts, 1000000000);
+	nsec_rem = do_div(ts, NSEC_PER_SEC);
 
 	ret = trace_seq_printf(s, "[%5ld.%09ld] calling  %s @ %i\n",
 			(unsigned long)ts, nsec_rem, call->func, call->caller);
@@ -92,7 +93,7 @@ initcall_ret_print_line(struct trace_iterator *iter)
 	trace_assign_type(field, entry);
 	init_ret = &field->boot_ret;
 	ts = iter->ts;
-	nsec_rem = do_div(ts, 1000000000);
+	nsec_rem = do_div(ts, NSEC_PER_SEC);
 
 	ret = trace_seq_printf(s, "[%5ld.%09ld] initcall %s "
 			"returned %d after %llu msecs\n",
diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index 8333715e406..7a7a9fd249a 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -30,6 +30,7 @@ static struct trace_array *branch_tracer;
 static void
 probe_likely_condition(struct ftrace_branch_data *f, int val, int expect)
 {
+	struct ftrace_event_call *call = &event_branch;
 	struct trace_array *tr = branch_tracer;
 	struct ring_buffer_event *event;
 	struct trace_branch *entry;
@@ -73,7 +74,8 @@ probe_likely_condition(struct ftrace_branch_data *f, int val, int expect)
 	entry->line = f->line;
 	entry->correct = val == expect;
 
-	ring_buffer_unlock_commit(tr->buffer, event);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		ring_buffer_unlock_commit(tr->buffer, event);
 
  out:
 	atomic_dec(&tr->data[cpu]->disabled);
@@ -271,7 +273,7 @@ static int branch_stat_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static void *annotated_branch_stat_start(void)
+static void *annotated_branch_stat_start(struct tracer_stat *trace)
 {
 	return __start_annotated_branch_profile;
 }
@@ -346,7 +348,7 @@ static int all_branch_stat_headers(struct seq_file *m)
 	return 0;
 }
 
-static void *all_branch_stat_start(void)
+static void *all_branch_stat_start(struct tracer_stat *trace)
 {
 	return __start_branch_profile;
 }
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index 22cba997077..5b5895afecf 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -10,22 +10,30 @@
 int ftrace_profile_enable(int event_id)
 {
 	struct ftrace_event_call *event;
+	int ret = -EINVAL;
 
-	for_each_event(event) {
-		if (event->id == event_id)
-			return event->profile_enable(event);
+	mutex_lock(&event_mutex);
+	list_for_each_entry(event, &ftrace_events, list) {
+		if (event->id == event_id) {
+			ret = event->profile_enable(event);
+			break;
+		}
 	}
+	mutex_unlock(&event_mutex);
 
-	return -EINVAL;
+	return ret;
 }
 
 void ftrace_profile_disable(int event_id)
 {
 	struct ftrace_event_call *event;
 
-	for_each_event(event) {
-		if (event->id == event_id)
-			return event->profile_disable(event);
+	mutex_lock(&event_mutex);
+	list_for_each_entry(event, &ftrace_events, list) {
+		if (event->id == event_id) {
+			event->profile_disable(event);
+			break;
+		}
 	}
+	mutex_unlock(&event_mutex);
 }
-
diff --git a/kernel/trace/trace_event_types.h b/kernel/trace/trace_event_types.h
index fd78bee71dd..5e32e375134 100644
--- a/kernel/trace/trace_event_types.h
+++ b/kernel/trace/trace_event_types.h
@@ -57,7 +57,7 @@ TRACE_EVENT_FORMAT(context_switch, TRACE_CTX, ctx_switch_entry, ignore,
 	TP_RAW_FMT("%u:%u:%u  ==+ %u:%u:%u [%03u]")
 );
 
-TRACE_EVENT_FORMAT(special, TRACE_SPECIAL, special_entry, ignore,
+TRACE_EVENT_FORMAT_NOFILTER(special, TRACE_SPECIAL, special_entry, ignore,
 	TRACE_STRUCT(
 		TRACE_FIELD(unsigned long, arg1, arg1)
 		TRACE_FIELD(unsigned long, arg2, arg2)
@@ -122,8 +122,10 @@ TRACE_EVENT_FORMAT(print, TRACE_PRINT, print_entry, ignore,
 TRACE_EVENT_FORMAT(branch, TRACE_BRANCH, trace_branch, ignore,
 	TRACE_STRUCT(
 		TRACE_FIELD(unsigned int, line, line)
-		TRACE_FIELD_SPECIAL(char func[TRACE_FUNC_SIZE+1], func, func)
-		TRACE_FIELD_SPECIAL(char file[TRACE_FUNC_SIZE+1], file, file)
+		TRACE_FIELD_SPECIAL(char func[TRACE_FUNC_SIZE+1], func,
+				    TRACE_FUNC_SIZE+1, func)
+		TRACE_FIELD_SPECIAL(char file[TRACE_FUNC_SIZE+1], file,
+				    TRACE_FUNC_SIZE+1, file)
 		TRACE_FIELD(char, correct, correct)
 	),
 	TP_RAW_FMT("%u:%s:%s (%u)")
@@ -139,8 +141,8 @@ TRACE_EVENT_FORMAT(hw_branch, TRACE_HW_BRANCHES, hw_branch_entry, ignore,
 
 TRACE_EVENT_FORMAT(power, TRACE_POWER, trace_power, ignore,
 	TRACE_STRUCT(
-		TRACE_FIELD(ktime_t, state_data.stamp, stamp)
-		TRACE_FIELD(ktime_t, state_data.end, end)
+		TRACE_FIELD_SIGN(ktime_t, state_data.stamp, stamp, 1)
+		TRACE_FIELD_SIGN(ktime_t, state_data.end, end, 1)
 		TRACE_FIELD(int, state_data.type, type)
 		TRACE_FIELD(int, state_data.state, state)
 	),
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 576f4fa2af0..aa08be69a1b 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -8,19 +8,25 @@
  *
  */
 
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 
 #include "trace_output.h"
 
 #define TRACE_SYSTEM "TRACE_SYSTEM"
 
-static DEFINE_MUTEX(event_mutex);
+DEFINE_MUTEX(event_mutex);
+
+LIST_HEAD(ftrace_events);
 
 int trace_define_field(struct ftrace_event_call *call, char *type,
-		       char *name, int offset, int size)
+		       char *name, int offset, int size, int is_signed)
 {
 	struct ftrace_event_field *field;
 
@@ -38,6 +44,7 @@ int trace_define_field(struct ftrace_event_call *call, char *type,
 
 	field->offset = offset;
 	field->size = size;
+	field->is_signed = is_signed;
 	list_add(&field->link, &call->fields);
 
 	return 0;
@@ -51,47 +58,94 @@ err:
 
 	return -ENOMEM;
 }
+EXPORT_SYMBOL_GPL(trace_define_field);
 
-static void ftrace_clear_events(void)
-{
-	struct ftrace_event_call *call = (void *)__start_ftrace_events;
-
+#ifdef CONFIG_MODULES
 
-	while ((unsigned long)call < (unsigned long)__stop_ftrace_events) {
+static void trace_destroy_fields(struct ftrace_event_call *call)
+{
+	struct ftrace_event_field *field, *next;
 
-		if (call->enabled) {
-			call->enabled = 0;
-			call->unregfunc();
-		}
-		call++;
+	list_for_each_entry_safe(field, next, &call->fields, link) {
+		list_del(&field->link);
+		kfree(field->type);
+		kfree(field->name);
+		kfree(field);
 	}
 }
 
+#endif /* CONFIG_MODULES */
+
 static void ftrace_event_enable_disable(struct ftrace_event_call *call,
 					int enable)
 {
-
 	switch (enable) {
 	case 0:
 		if (call->enabled) {
 			call->enabled = 0;
+			tracing_stop_cmdline_record();
 			call->unregfunc();
 		}
 		break;
 	case 1:
 		if (!call->enabled) {
 			call->enabled = 1;
+			tracing_start_cmdline_record();
 			call->regfunc();
 		}
 		break;
 	}
 }
 
+static void ftrace_clear_events(void)
+{
+	struct ftrace_event_call *call;
+
+	mutex_lock(&event_mutex);
+	list_for_each_entry(call, &ftrace_events, list) {
+		ftrace_event_enable_disable(call, 0);
+	}
+	mutex_unlock(&event_mutex);
+}
+
+/*
+ * __ftrace_set_clr_event(NULL, NULL, NULL, set) will set/unset all events.
+ */
+static int __ftrace_set_clr_event(const char *match, const char *sub,
+				  const char *event, int set)
+{
+	struct ftrace_event_call *call;
+	int ret = -EINVAL;
+
+	mutex_lock(&event_mutex);
+	list_for_each_entry(call, &ftrace_events, list) {
+
+		if (!call->name || !call->regfunc)
+			continue;
+
+		if (match &&
+		    strcmp(match, call->name) != 0 &&
+		    strcmp(match, call->system) != 0)
+			continue;
+
+		if (sub && strcmp(sub, call->system) != 0)
+			continue;
+
+		if (event && strcmp(event, call->name) != 0)
+			continue;
+
+		ftrace_event_enable_disable(call, set);
+
+		ret = 0;
+	}
+	mutex_unlock(&event_mutex);
+
+	return ret;
+}
+
 static int ftrace_set_clr_event(char *buf, int set)
 {
-	struct ftrace_event_call *call = __start_ftrace_events;
 	char *event = NULL, *sub = NULL, *match;
-	int ret = -EINVAL;
 
 	/*
 	 * The buf format can be <subsystem>:<event-name>
@@ -117,30 +171,24 @@ static int ftrace_set_clr_event(char *buf, int set)
 			event = NULL;
 	}
 
-	mutex_lock(&event_mutex);
-	for_each_event(call) {
-
-		if (!call->name || !call->regfunc)
-			continue;
-
-		if (match &&
-		    strcmp(match, call->name) != 0 &&
-		    strcmp(match, call->system) != 0)
-			continue;
-
-		if (sub && strcmp(sub, call->system) != 0)
-			continue;
-
-		if (event && strcmp(event, call->name) != 0)
-			continue;
-
-		ftrace_event_enable_disable(call, set);
-
-		ret = 0;
-	}
-	mutex_unlock(&event_mutex);
+	return __ftrace_set_clr_event(match, sub, event, set);
+}
 
-	return ret;
+/**
+ * trace_set_clr_event - enable or disable an event
+ * @system: system name to match (NULL for any system)
+ * @event: event name to match (NULL for all events, within system)
+ * @set: 1 to enable, 0 to disable
+ *
+ * This is a way for other parts of the kernel to enable or disable
+ * event recording.
+ *
+ * Returns 0 on success, -EINVAL if the parameters do not match any
+ * registered events.
+ */
+int trace_set_clr_event(const char *system, const char *event, int set)
+{
+	return __ftrace_set_clr_event(NULL, system, event, set);
 }
 
 /* 128 should be much more than enough */
@@ -224,15 +272,17 @@ ftrace_event_write(struct file *file, const char __user *ubuf,
 static void *
 t_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	struct ftrace_event_call *call = m->private;
-	struct ftrace_event_call *next = call;
+	struct list_head *list = m->private;
+	struct ftrace_event_call *call;
 
 	(*pos)++;
 
 	for (;;) {
-		if ((unsigned long)call >= (unsigned long)__stop_ftrace_events)
+		if (list == &ftrace_events)
 			return NULL;
 
+		call = list_entry(list, struct ftrace_event_call, list);
+
 		/*
 		 * The ftrace subsystem is for showing formats only.
 		 * They can not be enabled or disabled via the event files.
@@ -240,45 +290,51 @@ t_next(struct seq_file *m, void *v, loff_t *pos)
 		if (call->regfunc)
 			break;
 
-		call++;
-		next = call;
+		list = list->next;
 	}
 
-	m->private = ++next;
+	m->private = list->next;
 
 	return call;
 }
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
+	mutex_lock(&event_mutex);
+	if (*pos == 0)
+		m->private = ftrace_events.next;
 	return t_next(m, NULL, pos);
 }
 
 static void *
 s_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	struct ftrace_event_call *call = m->private;
-	struct ftrace_event_call *next;
+	struct list_head *list = m->private;
+	struct ftrace_event_call *call;
 
 	(*pos)++;
 
  retry:
-	if ((unsigned long)call >= (unsigned long)__stop_ftrace_events)
+	if (list == &ftrace_events)
 		return NULL;
 
+	call = list_entry(list, struct ftrace_event_call, list);
+
 	if (!call->enabled) {
-		call++;
+		list = list->next;
 		goto retry;
 	}
 
-	next = call;
-	m->private = ++next;
+	m->private = list->next;
 
 	return call;
 }
 
 static void *s_start(struct seq_file *m, loff_t *pos)
 {
+	mutex_lock(&event_mutex);
+	if (*pos == 0)
+		m->private = ftrace_events.next;
 	return s_next(m, NULL, pos);
 }
 
@@ -295,12 +351,12 @@ static int t_show(struct seq_file *m, void *v)
 
 static void t_stop(struct seq_file *m, void *p)
 {
+	mutex_unlock(&event_mutex);
 }
 
 static int
 ftrace_event_seq_open(struct inode *inode, struct file *file)
 {
-	int ret;
 	const struct seq_operations *seq_ops;
 
 	if ((file->f_mode & FMODE_WRITE) &&
@@ -308,13 +364,7 @@ ftrace_event_seq_open(struct inode *inode, struct file *file)
 		ftrace_clear_events();
 
 	seq_ops = inode->i_private;
-	ret = seq_open(file, seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-
-		m->private = __start_ftrace_events;
-	}
-	return ret;
+	return seq_open(file, seq_ops);
 }
 
 static ssize_t
@@ -374,8 +424,93 @@ event_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
 	return cnt;
 }
 
+static ssize_t
+system_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
+		   loff_t *ppos)
+{
+	const char set_to_char[4] = { '?', '0', '1', 'X' };
+	const char *system = filp->private_data;
+	struct ftrace_event_call *call;
+	char buf[2];
+	int set = 0;
+	int ret;
+
+	mutex_lock(&event_mutex);
+	list_for_each_entry(call, &ftrace_events, list) {
+		if (!call->name || !call->regfunc)
+			continue;
+
+		if (system && strcmp(call->system, system) != 0)
+			continue;
+
+		/*
+		 * We need to find out if all the events are set
+		 * or if all events or cleared, or if we have
+		 * a mixture.
+		 */
+		set |= (1 << !!call->enabled);
+
+		/*
+		 * If we have a mixture, no need to look further.
+		 */
+		if (set == 3)
+			break;
+	}
+	mutex_unlock(&event_mutex);
+
+	buf[0] = set_to_char[set];
+	buf[1] = '\n';
+
+	ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, 2);
+
+	return ret;
+}
+
+static ssize_t
+system_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
+		    loff_t *ppos)
+{
+	const char *system = filp->private_data;
+	unsigned long val;
+	char buf[64];
+	ssize_t ret;
+
+	if (cnt >= sizeof(buf))
+		return -EINVAL;
+
+	if (copy_from_user(&buf, ubuf, cnt))
+		return -EFAULT;
+
+	buf[cnt] = 0;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	ret = tracing_update_buffers();
+	if (ret < 0)
+		return ret;
+
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	ret = __ftrace_set_clr_event(NULL, system, NULL, val);
+	if (ret)
+		goto out;
+
+	ret = cnt;
+
+out:
+	*ppos += cnt;
+
+	return ret;
+}
+
+extern char *__bad_type_size(void);
+
 #undef FIELD
 #define FIELD(type, name)						\
+	sizeof(type) != sizeof(field.name) ? __bad_type_size() :	\
 	#type, "common_" #name, offsetof(typeof(field), name),		\
 		sizeof(field.name)
 
@@ -391,7 +526,7 @@ static int trace_write_header(struct trace_seq *s)
 				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
 				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
 				"\n",
-				FIELD(unsigned char, type),
+				FIELD(unsigned short, type),
 				FIELD(unsigned char, flags),
 				FIELD(unsigned char, preempt_count),
 				FIELD(int, pid),
@@ -481,7 +616,7 @@ event_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
 
 	trace_seq_init(s);
 
-	filter_print_preds(call->preds, s);
+	print_event_filter(call, s);
 	r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
 
 	kfree(s);
@@ -494,38 +629,26 @@ event_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
 		   loff_t *ppos)
 {
 	struct ftrace_event_call *call = filp->private_data;
-	char buf[64], *pbuf = buf;
-	struct filter_pred *pred;
+	char *buf;
 	int err;
 
-	if (cnt >= sizeof(buf))
+	if (cnt >= PAGE_SIZE)
 		return -EINVAL;
 
-	if (copy_from_user(&buf, ubuf, cnt))
-		return -EFAULT;
-	buf[cnt] = '\0';
-
-	pred = kzalloc(sizeof(*pred), GFP_KERNEL);
-	if (!pred)
+	buf = (char *)__get_free_page(GFP_TEMPORARY);
+	if (!buf)
 		return -ENOMEM;
 
-	err = filter_parse(&pbuf, pred);
-	if (err < 0) {
-		filter_free_pred(pred);
-		return err;
-	}
-
-	if (pred->clear) {
-		filter_free_preds(call);
-		filter_free_pred(pred);
-		return cnt;
+	if (copy_from_user(buf, ubuf, cnt)) {
+		free_page((unsigned long) buf);
+		return -EFAULT;
 	}
+	buf[cnt] = '\0';
 
-	err = filter_add_pred(call, pred);
-	if (err < 0) {
-		filter_free_pred(pred);
+	err = apply_event_filter(call, buf);
+	free_page((unsigned long) buf);
+	if (err < 0)
 		return err;
-	}
 
 	*ppos += cnt;
 
@@ -549,7 +672,7 @@ subsystem_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
 
 	trace_seq_init(s);
 
-	filter_print_preds(system->preds, s);
+	print_subsystem_event_filter(system, s);
 	r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
 
 	kfree(s);
@@ -562,45 +685,56 @@ subsystem_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
 		       loff_t *ppos)
 {
 	struct event_subsystem *system = filp->private_data;
-	char buf[64], *pbuf = buf;
-	struct filter_pred *pred;
+	char *buf;
 	int err;
 
-	if (cnt >= sizeof(buf))
+	if (cnt >= PAGE_SIZE)
 		return -EINVAL;
 
-	if (copy_from_user(&buf, ubuf, cnt))
-		return -EFAULT;
-	buf[cnt] = '\0';
-
-	pred = kzalloc(sizeof(*pred), GFP_KERNEL);
-	if (!pred)
+	buf = (char *)__get_free_page(GFP_TEMPORARY);
+	if (!buf)
 		return -ENOMEM;
 
-	err = filter_parse(&pbuf, pred);
-	if (err < 0) {
-		filter_free_pred(pred);
-		return err;
-	}
-
-	if (pred->clear) {
-		filter_free_subsystem_preds(system);
-		filter_free_pred(pred);
-		return cnt;
+	if (copy_from_user(buf, ubuf, cnt)) {
+		free_page((unsigned long) buf);
+		return -EFAULT;
 	}
+	buf[cnt] = '\0';
 
-	err = filter_add_subsystem_pred(system, pred);
-	if (err < 0) {
-		filter_free_subsystem_preds(system);
-		filter_free_pred(pred);
+	err = apply_subsystem_event_filter(system, buf);
+	free_page((unsigned long) buf);
+	if (err < 0)
 		return err;
-	}
 
 	*ppos += cnt;
 
 	return cnt;
 }
 
+static ssize_t
+show_header(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
+{
+	int (*func)(struct trace_seq *s) = filp->private_data;
+	struct trace_seq *s;
+	int r;
+
+	if (*ppos)
+		return 0;
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	trace_seq_init(s);
+
+	func(s);
+	r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
+
+	kfree(s);
+
+	return r;
+}
+
 static const struct seq_operations show_event_seq_ops = {
 	.start = t_start,
 	.next = t_next,
@@ -658,6 +792,17 @@ static const struct file_operations ftrace_subsystem_filter_fops = {
 	.write = subsystem_filter_write,
 };
 
+static const struct file_operations ftrace_system_enable_fops = {
+	.open = tracing_open_generic,
+	.read = system_enable_read,
+	.write = system_enable_write,
+};
+
+static const struct file_operations ftrace_show_header_fops = {
+	.open = tracing_open_generic,
+	.read = show_header,
+};
+
 static struct dentry *event_trace_events_dir(void)
 {
 	static struct dentry *d_tracer;
@@ -684,6 +829,7 @@ static struct dentry *
 event_subsystem_dir(const char *name, struct dentry *d_events)
 {
 	struct event_subsystem *system;
+	struct dentry *entry;
 
 	/* First see if we did not already create this dir */
 	list_for_each_entry(system, &event_subsystems, list) {
@@ -707,16 +853,46 @@ event_subsystem_dir(const char *name, struct dentry *d_events)
 		return d_events;
 	}
 
-	system->name = name;
+	system->name = kstrdup(name, GFP_KERNEL);
+	if (!system->name) {
+		debugfs_remove(system->entry);
+		kfree(system);
+		return d_events;
+	}
+
 	list_add(&system->list, &event_subsystems);
 
-	system->preds = NULL;
+	system->filter = NULL;
+
+	system->filter = kzalloc(sizeof(struct event_filter), GFP_KERNEL);
+	if (!system->filter) {
+		pr_warning("Could not allocate filter for subsystem "
+			   "'%s'\n", name);
+		return system->entry;
+	}
+
+	entry = debugfs_create_file("filter", 0644, system->entry, system,
+				    &ftrace_subsystem_filter_fops);
+	if (!entry) {
+		kfree(system->filter);
+		system->filter = NULL;
+		pr_warning("Could not create debugfs "
+			   "'%s/filter' entry\n", name);
+	}
+
+	entry = trace_create_file("enable", 0644, system->entry,
+				  (void *)system->name,
+				  &ftrace_system_enable_fops);
 
 	return system->entry;
 }
 
 static int
-event_create_dir(struct ftrace_event_call *call, struct dentry *d_events)
+event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
+		 const struct file_operations *id,
+		 const struct file_operations *enable,
+		 const struct file_operations *filter,
+		 const struct file_operations *format)
 {
 	struct dentry *entry;
 	int ret;
@@ -725,7 +901,7 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events)
 	 * If the trace point header did not define TRACE_SYSTEM
 	 * then the system would be called "TRACE_SYSTEM".
 	 */
-	if (strcmp(call->system, "TRACE_SYSTEM") != 0)
+	if (strcmp(call->system, TRACE_SYSTEM) != 0)
 		d_events = event_subsystem_dir(call->system, d_events);
 
 	if (call->raw_init) {
@@ -744,21 +920,13 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events)
 		return -1;
 	}
 
-	if (call->regfunc) {
-		entry = debugfs_create_file("enable", 0644, call->dir, call,
-					    &ftrace_enable_fops);
-		if (!entry)
-			pr_warning("Could not create debugfs "
-				   "'%s/enable' entry\n", call->name);
-	}
+	if (call->regfunc)
+		entry = trace_create_file("enable", 0644, call->dir, call,
+					  enable);
 
-	if (call->id) {
-		entry = debugfs_create_file("id", 0444, call->dir, call,
-				&ftrace_event_id_fops);
-		if (!entry)
-			pr_warning("Could not create debugfs '%s/id' entry\n",
-					call->name);
-	}
+	if (call->id)
+		entry = trace_create_file("id", 0444, call->dir, call,
+					  id);
 
 	if (call->define_fields) {
 		ret = call->define_fields();
@@ -767,32 +935,195 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events)
 				   " events/%s\n", call->name);
 			return ret;
 		}
-		entry = debugfs_create_file("filter", 0644, call->dir, call,
-					    &ftrace_event_filter_fops);
-		if (!entry)
-			pr_warning("Could not create debugfs "
-				   "'%s/filter' entry\n", call->name);
+		entry = trace_create_file("filter", 0644, call->dir, call,
+					  filter);
 	}
 
 	/* A trace may not want to export its format */
 	if (!call->show_format)
 		return 0;
 
-	entry = debugfs_create_file("format", 0444, call->dir, call,
-				    &ftrace_event_format_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'%s/format' entry\n", call->name);
+	entry = trace_create_file("format", 0444, call->dir, call,
+				  format);
+
+	return 0;
+}
+
+#define for_each_event(event, start, end)			\
+	for (event = start;					\
+	     (unsigned long)event < (unsigned long)end;		\
+	     event++)
+
+#ifdef CONFIG_MODULES
+
+static LIST_HEAD(ftrace_module_file_list);
+
+/*
+ * Modules must own their file_operations to keep up with
+ * reference counting.
+ */
+struct ftrace_module_file_ops {
+	struct list_head		list;
+	struct module			*mod;
+	struct file_operations		id;
+	struct file_operations		enable;
+	struct file_operations		format;
+	struct file_operations		filter;
+};
+
+static struct ftrace_module_file_ops *
+trace_create_file_ops(struct module *mod)
+{
+	struct ftrace_module_file_ops *file_ops;
+
+	/*
+	 * This is a bit of a PITA. To allow for correct reference
+	 * counting, modules must "own" their file_operations.
+	 * To do this, we allocate the file operations that will be
+	 * used in the event directory.
+	 */
+
+	file_ops = kmalloc(sizeof(*file_ops), GFP_KERNEL);
+	if (!file_ops)
+		return NULL;
+
+	file_ops->mod = mod;
+
+	file_ops->id = ftrace_event_id_fops;
+	file_ops->id.owner = mod;
+
+	file_ops->enable = ftrace_enable_fops;
+	file_ops->enable.owner = mod;
+
+	file_ops->filter = ftrace_event_filter_fops;
+	file_ops->filter.owner = mod;
+
+	file_ops->format = ftrace_event_format_fops;
+	file_ops->format.owner = mod;
+
+	list_add(&file_ops->list, &ftrace_module_file_list);
+
+	return file_ops;
+}
+
+static void trace_module_add_events(struct module *mod)
+{
+	struct ftrace_module_file_ops *file_ops = NULL;
+	struct ftrace_event_call *call, *start, *end;
+	struct dentry *d_events;
+
+	start = mod->trace_events;
+	end = mod->trace_events + mod->num_trace_events;
+
+	if (start == end)
+		return;
+
+	d_events = event_trace_events_dir();
+	if (!d_events)
+		return;
+
+	for_each_event(call, start, end) {
+		/* The linker may leave blanks */
+		if (!call->name)
+			continue;
+
+		/*
+		 * This module has events, create file ops for this module
+		 * if not already done.
+		 */
+		if (!file_ops) {
+			file_ops = trace_create_file_ops(mod);
+			if (!file_ops)
+				return;
+		}
+		call->mod = mod;
+		list_add(&call->list, &ftrace_events);
+		event_create_dir(call, d_events,
+				 &file_ops->id, &file_ops->enable,
+				 &file_ops->filter, &file_ops->format);
+	}
+}
+
+static void trace_module_remove_events(struct module *mod)
+{
+	struct ftrace_module_file_ops *file_ops;
+	struct ftrace_event_call *call, *p;
+	bool found = false;
+
+	down_write(&trace_event_mutex);
+	list_for_each_entry_safe(call, p, &ftrace_events, list) {
+		if (call->mod == mod) {
+			found = true;
+			ftrace_event_enable_disable(call, 0);
+			if (call->event)
+				__unregister_ftrace_event(call->event);
+			debugfs_remove_recursive(call->dir);
+			list_del(&call->list);
+			trace_destroy_fields(call);
+			destroy_preds(call);
+		}
+	}
+
+	/* Now free the file_operations */
+	list_for_each_entry(file_ops, &ftrace_module_file_list, list) {
+		if (file_ops->mod == mod)
+			break;
+	}
+	if (&file_ops->list != &ftrace_module_file_list) {
+		list_del(&file_ops->list);
+		kfree(file_ops);
+	}
+
+	/*
+	 * It is safest to reset the ring buffer if the module being unloaded
+	 * registered any events.
+	 */
+	if (found)
+		tracing_reset_current_online_cpus();
+	up_write(&trace_event_mutex);
+}
+
+static int trace_module_notify(struct notifier_block *self,
+			       unsigned long val, void *data)
+{
+	struct module *mod = data;
+
+	mutex_lock(&event_mutex);
+	switch (val) {
+	case MODULE_STATE_COMING:
+		trace_module_add_events(mod);
+		break;
+	case MODULE_STATE_GOING:
+		trace_module_remove_events(mod);
+		break;
+	}
+	mutex_unlock(&event_mutex);
 
 	return 0;
 }
+#else
+static int trace_module_notify(struct notifier_block *self,
+			       unsigned long val, void *data)
+{
+	return 0;
+}
+#endif /* CONFIG_MODULES */
+
+struct notifier_block trace_module_nb = {
+	.notifier_call = trace_module_notify,
+	.priority = 0,
+};
+
+extern struct ftrace_event_call __start_ftrace_events[];
+extern struct ftrace_event_call __stop_ftrace_events[];
 
 static __init int event_trace_init(void)
 {
-	struct ftrace_event_call *call = __start_ftrace_events;
+	struct ftrace_event_call *call;
 	struct dentry *d_tracer;
 	struct dentry *entry;
 	struct dentry *d_events;
+	int ret;
 
 	d_tracer = tracing_init_dentry();
 	if (!d_tracer)
@@ -816,13 +1147,243 @@ static __init int event_trace_init(void)
 	if (!d_events)
 		return 0;
 
-	for_each_event(call) {
+	/* ring buffer internal formats */
+	trace_create_file("header_page", 0444, d_events,
+			  ring_buffer_print_page_header,
+			  &ftrace_show_header_fops);
+
+	trace_create_file("header_event", 0444, d_events,
+			  ring_buffer_print_entry_header,
+			  &ftrace_show_header_fops);
+
+	trace_create_file("enable", 0644, d_events,
+			  NULL, &ftrace_system_enable_fops);
+
+	for_each_event(call, __start_ftrace_events, __stop_ftrace_events) {
 		/* The linker may leave blanks */
 		if (!call->name)
 			continue;
-		event_create_dir(call, d_events);
+		list_add(&call->list, &ftrace_events);
+		event_create_dir(call, d_events, &ftrace_event_id_fops,
+				 &ftrace_enable_fops, &ftrace_event_filter_fops,
+				 &ftrace_event_format_fops);
 	}
 
+	ret = register_module_notifier(&trace_module_nb);
+	if (ret)
+		pr_warning("Failed to register trace events module notifier\n");
+
 	return 0;
 }
 fs_initcall(event_trace_init);
+
+#ifdef CONFIG_FTRACE_STARTUP_TEST
+
+static DEFINE_SPINLOCK(test_spinlock);
+static DEFINE_SPINLOCK(test_spinlock_irq);
+static DEFINE_MUTEX(test_mutex);
+
+static __init void test_work(struct work_struct *dummy)
+{
+	spin_lock(&test_spinlock);
+	spin_lock_irq(&test_spinlock_irq);
+	udelay(1);
+	spin_unlock_irq(&test_spinlock_irq);
+	spin_unlock(&test_spinlock);
+
+	mutex_lock(&test_mutex);
+	msleep(1);
+	mutex_unlock(&test_mutex);
+}
+
+static __init int event_test_thread(void *unused)
+{
+	void *test_malloc;
+
+	test_malloc = kmalloc(1234, GFP_KERNEL);
+	if (!test_malloc)
+		pr_info("failed to kmalloc\n");
+
+	schedule_on_each_cpu(test_work);
+
+	kfree(test_malloc);
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	while (!kthread_should_stop())
+		schedule();
+
+	return 0;
+}
+
+/*
+ * Do various things that may trigger events.
+ */
+static __init void event_test_stuff(void)
+{
+	struct task_struct *test_thread;
+
+	test_thread = kthread_run(event_test_thread, NULL, "test-events");
+	msleep(1);
+	kthread_stop(test_thread);
+}
+
+/*
+ * For every trace event defined, we will test each trace point separately,
+ * and then by groups, and finally all trace points.
+ */
+static __init void event_trace_self_tests(void)
+{
+	struct ftrace_event_call *call;
+	struct event_subsystem *system;
+	int ret;
+
+	pr_info("Running tests on trace events:\n");
+
+	list_for_each_entry(call, &ftrace_events, list) {
+
+		/* Only test those that have a regfunc */
+		if (!call->regfunc)
+			continue;
+
+		pr_info("Testing event %s: ", call->name);
+
+		/*
+		 * If an event is already enabled, someone is using
+		 * it and the self test should not be on.
+		 */
+		if (call->enabled) {
+			pr_warning("Enabled event during self test!\n");
+			WARN_ON_ONCE(1);
+			continue;
+		}
+
+		ftrace_event_enable_disable(call, 1);
+		event_test_stuff();
+		ftrace_event_enable_disable(call, 0);
+
+		pr_cont("OK\n");
+	}
+
+	/* Now test at the sub system level */
+
+	pr_info("Running tests on trace event systems:\n");
+
+	list_for_each_entry(system, &event_subsystems, list) {
+
+		/* the ftrace system is special, skip it */
+		if (strcmp(system->name, "ftrace") == 0)
+			continue;
+
+		pr_info("Testing event system %s: ", system->name);
+
+		ret = __ftrace_set_clr_event(NULL, system->name, NULL, 1);
+		if (WARN_ON_ONCE(ret)) {
+			pr_warning("error enabling system %s\n",
+				   system->name);
+			continue;
+		}
+
+		event_test_stuff();
+
+		ret = __ftrace_set_clr_event(NULL, system->name, NULL, 0);
+		if (WARN_ON_ONCE(ret))
+			pr_warning("error disabling system %s\n",
+				   system->name);
+
+		pr_cont("OK\n");
+	}
+
+	/* Test with all events enabled */
+
+	pr_info("Running tests on all trace events:\n");
+	pr_info("Testing all events: ");
+
+	ret = __ftrace_set_clr_event(NULL, NULL, NULL, 1);
+	if (WARN_ON_ONCE(ret)) {
+		pr_warning("error enabling all events\n");
+		return;
+	}
+
+	event_test_stuff();
+
+	/* reset sysname */
+	ret = __ftrace_set_clr_event(NULL, NULL, NULL, 0);
+	if (WARN_ON_ONCE(ret)) {
+		pr_warning("error disabling all events\n");
+		return;
+	}
+
+	pr_cont("OK\n");
+}
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+static DEFINE_PER_CPU(atomic_t, test_event_disable);
+
+static void
+function_test_events_call(unsigned long ip, unsigned long parent_ip)
+{
+	struct ring_buffer_event *event;
+	struct ftrace_entry *entry;
+	unsigned long flags;
+	long disabled;
+	int resched;
+	int cpu;
+	int pc;
+
+	pc = preempt_count();
+	resched = ftrace_preempt_disable();
+	cpu = raw_smp_processor_id();
+	disabled = atomic_inc_return(&per_cpu(test_event_disable, cpu));
+
+	if (disabled != 1)
+		goto out;
+
+	local_save_flags(flags);
+
+	event = trace_current_buffer_lock_reserve(TRACE_FN, sizeof(*entry),
+						  flags, pc);
+	if (!event)
+		goto out;
+	entry	= ring_buffer_event_data(event);
+	entry->ip			= ip;
+	entry->parent_ip		= parent_ip;
+
+	trace_nowake_buffer_unlock_commit(event, flags, pc);
+
+ out:
+	atomic_dec(&per_cpu(test_event_disable, cpu));
+	ftrace_preempt_enable(resched);
+}
+
+static struct ftrace_ops trace_ops __initdata  =
+{
+	.func = function_test_events_call,
+};
+
+static __init void event_trace_self_test_with_function(void)
+{
+	register_ftrace_function(&trace_ops);
+	pr_info("Running tests again, along with the function tracer\n");
+	event_trace_self_tests();
+	unregister_ftrace_function(&trace_ops);
+}
+#else
+static __init void event_trace_self_test_with_function(void)
+{
+}
+#endif
+
+static __init int event_trace_self_tests_init(void)
+{
+
+	event_trace_self_tests();
+
+	event_trace_self_test_with_function();
+
+	return 0;
+}
+
+late_initcall(event_trace_self_tests_init);
+
+#endif
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index e03cbf1e38f..db6e54bdb59 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -22,119 +22,297 @@
 #include <linux/uaccess.h>
 #include <linux/module.h>
 #include <linux/ctype.h>
+#include <linux/mutex.h>
 
 #include "trace.h"
 #include "trace_output.h"
 
-static int filter_pred_64(struct filter_pred *pred, void *event)
+static DEFINE_MUTEX(filter_mutex);
+
+enum filter_op_ids
+{
+	OP_OR,
+	OP_AND,
+	OP_NE,
+	OP_EQ,
+	OP_LT,
+	OP_LE,
+	OP_GT,
+	OP_GE,
+	OP_NONE,
+	OP_OPEN_PAREN,
+};
+
+struct filter_op {
+	int id;
+	char *string;
+	int precedence;
+};
+
+static struct filter_op filter_ops[] = {
+	{ OP_OR, "||", 1 },
+	{ OP_AND, "&&", 2 },
+	{ OP_NE, "!=", 4 },
+	{ OP_EQ, "==", 4 },
+	{ OP_LT, "<", 5 },
+	{ OP_LE, "<=", 5 },
+	{ OP_GT, ">", 5 },
+	{ OP_GE, ">=", 5 },
+	{ OP_NONE, "OP_NONE", 0 },
+	{ OP_OPEN_PAREN, "(", 0 },
+};
+
+enum {
+	FILT_ERR_NONE,
+	FILT_ERR_INVALID_OP,
+	FILT_ERR_UNBALANCED_PAREN,
+	FILT_ERR_TOO_MANY_OPERANDS,
+	FILT_ERR_OPERAND_TOO_LONG,
+	FILT_ERR_FIELD_NOT_FOUND,
+	FILT_ERR_ILLEGAL_FIELD_OP,
+	FILT_ERR_ILLEGAL_INTVAL,
+	FILT_ERR_BAD_SUBSYS_FILTER,
+	FILT_ERR_TOO_MANY_PREDS,
+	FILT_ERR_MISSING_FIELD,
+	FILT_ERR_INVALID_FILTER,
+};
+
+static char *err_text[] = {
+	"No error",
+	"Invalid operator",
+	"Unbalanced parens",
+	"Too many operands",
+	"Operand too long",
+	"Field not found",
+	"Illegal operation for field type",
+	"Illegal integer value",
+	"Couldn't find or set field in one of a subsystem's events",
+	"Too many terms in predicate expression",
+	"Missing field name and/or value",
+	"Meaningless filter expression",
+};
+
+struct opstack_op {
+	int op;
+	struct list_head list;
+};
+
+struct postfix_elt {
+	int op;
+	char *operand;
+	struct list_head list;
+};
+
+struct filter_parse_state {
+	struct filter_op *ops;
+	struct list_head opstack;
+	struct list_head postfix;
+	int lasterr;
+	int lasterr_pos;
+
+	struct {
+		char *string;
+		unsigned int cnt;
+		unsigned int tail;
+	} infix;
+
+	struct {
+		char string[MAX_FILTER_STR_VAL];
+		int pos;
+		unsigned int tail;
+	} operand;
+};
+
+DEFINE_COMPARISON_PRED(s64);
+DEFINE_COMPARISON_PRED(u64);
+DEFINE_COMPARISON_PRED(s32);
+DEFINE_COMPARISON_PRED(u32);
+DEFINE_COMPARISON_PRED(s16);
+DEFINE_COMPARISON_PRED(u16);
+DEFINE_COMPARISON_PRED(s8);
+DEFINE_COMPARISON_PRED(u8);
+
+DEFINE_EQUALITY_PRED(64);
+DEFINE_EQUALITY_PRED(32);
+DEFINE_EQUALITY_PRED(16);
+DEFINE_EQUALITY_PRED(8);
+
+static int filter_pred_and(struct filter_pred *pred __attribute((unused)),
+			   void *event __attribute((unused)),
+			   int val1, int val2)
+{
+	return val1 && val2;
+}
+
+static int filter_pred_or(struct filter_pred *pred __attribute((unused)),
+			  void *event __attribute((unused)),
+			  int val1, int val2)
+{
+	return val1 || val2;
+}
+
+/* Filter predicate for fixed sized arrays of characters */
+static int filter_pred_string(struct filter_pred *pred, void *event,
+			      int val1, int val2)
 {
-	u64 *addr = (u64 *)(event + pred->offset);
-	u64 val = (u64)pred->val;
-	int match;
+	char *addr = (char *)(event + pred->offset);
+	int cmp, match;
+
+	cmp = strncmp(addr, pred->str_val, pred->str_len);
 
-	match = (val == *addr) ^ pred->not;
+	match = (!cmp) ^ pred->not;
 
 	return match;
 }
 
-static int filter_pred_32(struct filter_pred *pred, void *event)
+/*
+ * Filter predicate for dynamic sized arrays of characters.
+ * These are implemented through a list of strings at the end
+ * of the entry.
+ * Also each of these strings have a field in the entry which
+ * contains its offset from the beginning of the entry.
+ * We have then first to get this field, dereference it
+ * and add it to the address of the entry, and at last we have
+ * the address of the string.
+ */
+static int filter_pred_strloc(struct filter_pred *pred, void *event,
+			      int val1, int val2)
 {
-	u32 *addr = (u32 *)(event + pred->offset);
-	u32 val = (u32)pred->val;
-	int match;
+	int str_loc = *(int *)(event + pred->offset);
+	char *addr = (char *)(event + str_loc);
+	int cmp, match;
+
+	cmp = strncmp(addr, pred->str_val, pred->str_len);
 
-	match = (val == *addr) ^ pred->not;
+	match = (!cmp) ^ pred->not;
 
 	return match;
 }
 
-static int filter_pred_16(struct filter_pred *pred, void *event)
+static int filter_pred_none(struct filter_pred *pred, void *event,
+			    int val1, int val2)
+{
+	return 0;
+}
+
+/* return 1 if event matches, 0 otherwise (discard) */
+int filter_match_preds(struct ftrace_event_call *call, void *rec)
 {
-	u16 *addr = (u16 *)(event + pred->offset);
-	u16 val = (u16)pred->val;
-	int match;
+	struct event_filter *filter = call->filter;
+	int match, top = 0, val1 = 0, val2 = 0;
+	int stack[MAX_FILTER_PRED];
+	struct filter_pred *pred;
+	int i;
+
+	for (i = 0; i < filter->n_preds; i++) {
+		pred = filter->preds[i];
+		if (!pred->pop_n) {
+			match = pred->fn(pred, rec, val1, val2);
+			stack[top++] = match;
+			continue;
+		}
+		if (pred->pop_n > top) {
+			WARN_ON_ONCE(1);
+			return 0;
+		}
+		val1 = stack[--top];
+		val2 = stack[--top];
+		match = pred->fn(pred, rec, val1, val2);
+		stack[top++] = match;
+	}
 
-	match = (val == *addr) ^ pred->not;
+	return stack[--top];
+}
+EXPORT_SYMBOL_GPL(filter_match_preds);
 
-	return match;
+static void parse_error(struct filter_parse_state *ps, int err, int pos)
+{
+	ps->lasterr = err;
+	ps->lasterr_pos = pos;
 }
 
-static int filter_pred_8(struct filter_pred *pred, void *event)
+static void remove_filter_string(struct event_filter *filter)
 {
-	u8 *addr = (u8 *)(event + pred->offset);
-	u8 val = (u8)pred->val;
-	int match;
+	kfree(filter->filter_string);
+	filter->filter_string = NULL;
+}
 
-	match = (val == *addr) ^ pred->not;
+static int replace_filter_string(struct event_filter *filter,
+				 char *filter_string)
+{
+	kfree(filter->filter_string);
+	filter->filter_string = kstrdup(filter_string, GFP_KERNEL);
+	if (!filter->filter_string)
+		return -ENOMEM;
 
-	return match;
+	return 0;
 }
 
-static int filter_pred_string(struct filter_pred *pred, void *event)
+static int append_filter_string(struct event_filter *filter,
+				char *string)
 {
-	char *addr = (char *)(event + pred->offset);
-	int cmp, match;
+	int newlen;
+	char *new_filter_string;
 
-	cmp = strncmp(addr, pred->str_val, pred->str_len);
+	BUG_ON(!filter->filter_string);
+	newlen = strlen(filter->filter_string) + strlen(string) + 1;
+	new_filter_string = kmalloc(newlen, GFP_KERNEL);
+	if (!new_filter_string)
+		return -ENOMEM;
 
-	match = (!cmp) ^ pred->not;
+	strcpy(new_filter_string, filter->filter_string);
+	strcat(new_filter_string, string);
+	kfree(filter->filter_string);
+	filter->filter_string = new_filter_string;
 
-	return match;
+	return 0;
 }
 
-/* return 1 if event matches, 0 otherwise (discard) */
-int filter_match_preds(struct ftrace_event_call *call, void *rec)
+static void append_filter_err(struct filter_parse_state *ps,
+			      struct event_filter *filter)
 {
-	int i, matched, and_failed = 0;
-	struct filter_pred *pred;
+	int pos = ps->lasterr_pos;
+	char *buf, *pbuf;
 
-	for (i = 0; i < MAX_FILTER_PRED; i++) {
-		if (call->preds[i]) {
-			pred = call->preds[i];
-			if (and_failed && !pred->or)
-				continue;
-			matched = pred->fn(pred, rec);
-			if (!matched && !pred->or) {
-				and_failed = 1;
-				continue;
-			} else if (matched && pred->or)
-				return 1;
-		} else
-			break;
-	}
+	buf = (char *)__get_free_page(GFP_TEMPORARY);
+	if (!buf)
+		return;
 
-	if (and_failed)
-		return 0;
+	append_filter_string(filter, "\n");
+	memset(buf, ' ', PAGE_SIZE);
+	if (pos > PAGE_SIZE - 128)
+		pos = 0;
+	buf[pos] = '^';
+	pbuf = &buf[pos] + 1;
 
-	return 1;
+	sprintf(pbuf, "\nparse_error: %s\n", err_text[ps->lasterr]);
+	append_filter_string(filter, buf);
+	free_page((unsigned long) buf);
 }
 
-void filter_print_preds(struct filter_pred **preds, struct trace_seq *s)
+void print_event_filter(struct ftrace_event_call *call, struct trace_seq *s)
 {
-	char *field_name;
-	struct filter_pred *pred;
-	int i;
+	struct event_filter *filter = call->filter;
 
-	if (!preds) {
+	mutex_lock(&filter_mutex);
+	if (filter->filter_string)
+		trace_seq_printf(s, "%s\n", filter->filter_string);
+	else
 		trace_seq_printf(s, "none\n");
-		return;
-	}
+	mutex_unlock(&filter_mutex);
+}
 
-	for (i = 0; i < MAX_FILTER_PRED; i++) {
-		if (preds[i]) {
-			pred = preds[i];
-			field_name = pred->field_name;
-			if (i)
-				trace_seq_printf(s, pred->or ? "|| " : "&& ");
-			trace_seq_printf(s, "%s ", field_name);
-			trace_seq_printf(s, pred->not ? "!= " : "== ");
-			if (pred->str_val)
-				trace_seq_printf(s, "%s\n", pred->str_val);
-			else
-				trace_seq_printf(s, "%llu\n", pred->val);
-		} else
-			break;
-	}
+void print_subsystem_event_filter(struct event_subsystem *system,
+				  struct trace_seq *s)
+{
+	struct event_filter *filter = system->filter;
+
+	mutex_lock(&filter_mutex);
+	if (filter->filter_string)
+		trace_seq_printf(s, "%s\n", filter->filter_string);
+	else
+		trace_seq_printf(s, "none\n");
+	mutex_unlock(&filter_mutex);
 }
 
 static struct ftrace_event_field *
@@ -150,284 +328,828 @@ find_event_field(struct ftrace_event_call *call, char *name)
 	return NULL;
 }
 
-void filter_free_pred(struct filter_pred *pred)
+static void filter_free_pred(struct filter_pred *pred)
 {
 	if (!pred)
 		return;
 
 	kfree(pred->field_name);
-	kfree(pred->str_val);
 	kfree(pred);
 }
 
-void filter_free_preds(struct ftrace_event_call *call)
+static void filter_clear_pred(struct filter_pred *pred)
 {
-	int i;
+	kfree(pred->field_name);
+	pred->field_name = NULL;
+	pred->str_len = 0;
+}
 
-	if (call->preds) {
-		for (i = 0; i < MAX_FILTER_PRED; i++)
-			filter_free_pred(call->preds[i]);
-		kfree(call->preds);
-		call->preds = NULL;
+static int filter_set_pred(struct filter_pred *dest,
+			   struct filter_pred *src,
+			   filter_pred_fn_t fn)
+{
+	*dest = *src;
+	if (src->field_name) {
+		dest->field_name = kstrdup(src->field_name, GFP_KERNEL);
+		if (!dest->field_name)
+			return -ENOMEM;
 	}
+	dest->fn = fn;
+
+	return 0;
 }
 
-void filter_free_subsystem_preds(struct event_subsystem *system)
+static void filter_disable_preds(struct ftrace_event_call *call)
 {
-	struct ftrace_event_call *call = __start_ftrace_events;
+	struct event_filter *filter = call->filter;
 	int i;
 
-	if (system->preds) {
-		for (i = 0; i < MAX_FILTER_PRED; i++)
-			filter_free_pred(system->preds[i]);
-		kfree(system->preds);
-		system->preds = NULL;
-	}
+	call->filter_active = 0;
+	filter->n_preds = 0;
 
-	events_for_each(call) {
-		if (!call->name || !call->regfunc)
-			continue;
+	for (i = 0; i < MAX_FILTER_PRED; i++)
+		filter->preds[i]->fn = filter_pred_none;
+}
+
+void destroy_preds(struct ftrace_event_call *call)
+{
+	struct event_filter *filter = call->filter;
+	int i;
 
-		if (!strcmp(call->system, system->name))
-			filter_free_preds(call);
+	for (i = 0; i < MAX_FILTER_PRED; i++) {
+		if (filter->preds[i])
+			filter_free_pred(filter->preds[i]);
 	}
+	kfree(filter->preds);
+	kfree(filter);
+	call->filter = NULL;
 }
 
-static int __filter_add_pred(struct ftrace_event_call *call,
-			     struct filter_pred *pred)
+int init_preds(struct ftrace_event_call *call)
 {
+	struct event_filter *filter;
+	struct filter_pred *pred;
 	int i;
 
-	if (call->preds && !pred->compound)
-		filter_free_preds(call);
+	filter = call->filter = kzalloc(sizeof(*filter), GFP_KERNEL);
+	if (!call->filter)
+		return -ENOMEM;
 
-	if (!call->preds) {
-		call->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
-				      GFP_KERNEL);
-		if (!call->preds)
-			return -ENOMEM;
-	}
+	call->filter_active = 0;
+	filter->n_preds = 0;
+
+	filter->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred), GFP_KERNEL);
+	if (!filter->preds)
+		goto oom;
 
 	for (i = 0; i < MAX_FILTER_PRED; i++) {
-		if (!call->preds[i]) {
-			call->preds[i] = pred;
-			return 0;
+		pred = kzalloc(sizeof(*pred), GFP_KERNEL);
+		if (!pred)
+			goto oom;
+		pred->fn = filter_pred_none;
+		filter->preds[i] = pred;
+	}
+
+	return 0;
+
+oom:
+	destroy_preds(call);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(init_preds);
+
+static void filter_free_subsystem_preds(struct event_subsystem *system)
+{
+	struct event_filter *filter = system->filter;
+	struct ftrace_event_call *call;
+	int i;
+
+	if (filter->n_preds) {
+		for (i = 0; i < filter->n_preds; i++)
+			filter_free_pred(filter->preds[i]);
+		kfree(filter->preds);
+		filter->preds = NULL;
+		filter->n_preds = 0;
+	}
+
+	mutex_lock(&event_mutex);
+	list_for_each_entry(call, &ftrace_events, list) {
+		if (!call->define_fields)
+			continue;
+
+		if (!strcmp(call->system, system->name)) {
+			filter_disable_preds(call);
+			remove_filter_string(call->filter);
 		}
 	}
+	mutex_unlock(&event_mutex);
+}
+
+static int filter_add_pred_fn(struct filter_parse_state *ps,
+			      struct ftrace_event_call *call,
+			      struct filter_pred *pred,
+			      filter_pred_fn_t fn)
+{
+	struct event_filter *filter = call->filter;
+	int idx, err;
+
+	if (filter->n_preds == MAX_FILTER_PRED) {
+		parse_error(ps, FILT_ERR_TOO_MANY_PREDS, 0);
+		return -ENOSPC;
+	}
+
+	idx = filter->n_preds;
+	filter_clear_pred(filter->preds[idx]);
+	err = filter_set_pred(filter->preds[idx], pred, fn);
+	if (err)
+		return err;
 
-	return -ENOSPC;
+	filter->n_preds++;
+	call->filter_active = 1;
+
+	return 0;
 }
 
+enum {
+	FILTER_STATIC_STRING = 1,
+	FILTER_DYN_STRING
+};
+
 static int is_string_field(const char *type)
 {
+	if (strstr(type, "__data_loc") && strstr(type, "char"))
+		return FILTER_DYN_STRING;
+
 	if (strchr(type, '[') && strstr(type, "char"))
-		return 1;
+		return FILTER_STATIC_STRING;
 
 	return 0;
 }
 
-int filter_add_pred(struct ftrace_event_call *call, struct filter_pred *pred)
+static int is_legal_op(struct ftrace_event_field *field, int op)
 {
-	struct ftrace_event_field *field;
-
-	field = find_event_field(call, pred->field_name);
-	if (!field)
-		return -EINVAL;
+	if (is_string_field(field->type) && (op != OP_EQ && op != OP_NE))
+		return 0;
 
-	pred->offset = field->offset;
+	return 1;
+}
 
-	if (is_string_field(field->type)) {
-		if (!pred->str_val)
-			return -EINVAL;
-		pred->fn = filter_pred_string;
-		pred->str_len = field->size;
-		return __filter_add_pred(call, pred);
-	} else {
-		if (pred->str_val)
-			return -EINVAL;
-	}
+static filter_pred_fn_t select_comparison_fn(int op, int field_size,
+					     int field_is_signed)
+{
+	filter_pred_fn_t fn = NULL;
 
-	switch (field->size) {
+	switch (field_size) {
 	case 8:
-		pred->fn = filter_pred_64;
+		if (op == OP_EQ || op == OP_NE)
+			fn = filter_pred_64;
+		else if (field_is_signed)
+			fn = filter_pred_s64;
+		else
+			fn = filter_pred_u64;
 		break;
 	case 4:
-		pred->fn = filter_pred_32;
+		if (op == OP_EQ || op == OP_NE)
+			fn = filter_pred_32;
+		else if (field_is_signed)
+			fn = filter_pred_s32;
+		else
+			fn = filter_pred_u32;
 		break;
 	case 2:
-		pred->fn = filter_pred_16;
+		if (op == OP_EQ || op == OP_NE)
+			fn = filter_pred_16;
+		else if (field_is_signed)
+			fn = filter_pred_s16;
+		else
+			fn = filter_pred_u16;
 		break;
 	case 1:
-		pred->fn = filter_pred_8;
+		if (op == OP_EQ || op == OP_NE)
+			fn = filter_pred_8;
+		else if (field_is_signed)
+			fn = filter_pred_s8;
+		else
+			fn = filter_pred_u8;
 		break;
-	default:
-		return -EINVAL;
 	}
 
-	return __filter_add_pred(call, pred);
+	return fn;
 }
 
-static struct filter_pred *copy_pred(struct filter_pred *pred)
+static int filter_add_pred(struct filter_parse_state *ps,
+			   struct ftrace_event_call *call,
+			   struct filter_pred *pred)
 {
-	struct filter_pred *new_pred = kmalloc(sizeof(*pred), GFP_KERNEL);
-	if (!new_pred)
-		return NULL;
+	struct ftrace_event_field *field;
+	filter_pred_fn_t fn;
+	unsigned long long val;
+	int string_type;
+
+	pred->fn = filter_pred_none;
+
+	if (pred->op == OP_AND) {
+		pred->pop_n = 2;
+		return filter_add_pred_fn(ps, call, pred, filter_pred_and);
+	} else if (pred->op == OP_OR) {
+		pred->pop_n = 2;
+		return filter_add_pred_fn(ps, call, pred, filter_pred_or);
+	}
+
+	field = find_event_field(call, pred->field_name);
+	if (!field) {
+		parse_error(ps, FILT_ERR_FIELD_NOT_FOUND, 0);
+		return -EINVAL;
+	}
 
-	memcpy(new_pred, pred, sizeof(*pred));
+	pred->offset = field->offset;
 
-	if (pred->field_name) {
-		new_pred->field_name = kstrdup(pred->field_name, GFP_KERNEL);
-		if (!new_pred->field_name) {
-			kfree(new_pred);
-			return NULL;
-		}
+	if (!is_legal_op(field, pred->op)) {
+		parse_error(ps, FILT_ERR_ILLEGAL_FIELD_OP, 0);
+		return -EINVAL;
 	}
 
-	if (pred->str_val) {
-		new_pred->str_val = kstrdup(pred->str_val, GFP_KERNEL);
-		if (!new_pred->str_val) {
-			filter_free_pred(new_pred);
-			return NULL;
+	string_type = is_string_field(field->type);
+	if (string_type) {
+		if (string_type == FILTER_STATIC_STRING)
+			fn = filter_pred_string;
+		else
+			fn = filter_pred_strloc;
+		pred->str_len = field->size;
+		if (pred->op == OP_NE)
+			pred->not = 1;
+		return filter_add_pred_fn(ps, call, pred, fn);
+	} else {
+		if (strict_strtoull(pred->str_val, 0, &val)) {
+			parse_error(ps, FILT_ERR_ILLEGAL_INTVAL, 0);
+			return -EINVAL;
 		}
+		pred->val = val;
+	}
+
+	fn = select_comparison_fn(pred->op, field->size, field->is_signed);
+	if (!fn) {
+		parse_error(ps, FILT_ERR_INVALID_OP, 0);
+		return -EINVAL;
 	}
 
-	return new_pred;
+	if (pred->op == OP_NE)
+		pred->not = 1;
+
+	return filter_add_pred_fn(ps, call, pred, fn);
 }
 
-int filter_add_subsystem_pred(struct event_subsystem *system,
-			      struct filter_pred *pred)
+static int filter_add_subsystem_pred(struct filter_parse_state *ps,
+				     struct event_subsystem *system,
+				     struct filter_pred *pred,
+				     char *filter_string)
 {
-	struct ftrace_event_call *call = __start_ftrace_events;
-	struct filter_pred *event_pred;
-	int i;
-
-	if (system->preds && !pred->compound)
-		filter_free_subsystem_preds(system);
+	struct event_filter *filter = system->filter;
+	struct ftrace_event_call *call;
+	int err = 0;
 
-	if (!system->preds) {
-		system->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
+	if (!filter->preds) {
+		filter->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
 					GFP_KERNEL);
-		if (!system->preds)
+
+		if (!filter->preds)
 			return -ENOMEM;
 	}
 
-	for (i = 0; i < MAX_FILTER_PRED; i++) {
-		if (!system->preds[i]) {
-			system->preds[i] = pred;
-			break;
-		}
+	if (filter->n_preds == MAX_FILTER_PRED) {
+		parse_error(ps, FILT_ERR_TOO_MANY_PREDS, 0);
+		return -ENOSPC;
 	}
 
-	if (i == MAX_FILTER_PRED)
-		return -ENOSPC;
+	filter->preds[filter->n_preds] = pred;
+	filter->n_preds++;
 
-	events_for_each(call) {
-		int err;
+	mutex_lock(&event_mutex);
+	list_for_each_entry(call, &ftrace_events, list) {
 
-		if (!call->name || !call->regfunc)
+		if (!call->define_fields)
 			continue;
 
 		if (strcmp(call->system, system->name))
 			continue;
 
-		if (!find_event_field(call, pred->field_name))
-			continue;
+		err = filter_add_pred(ps, call, pred);
+		if (err) {
+			mutex_unlock(&event_mutex);
+			filter_free_subsystem_preds(system);
+			parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
+			goto out;
+		}
+		replace_filter_string(call->filter, filter_string);
+	}
+	mutex_unlock(&event_mutex);
+out:
+	return err;
+}
 
-		event_pred = copy_pred(pred);
-		if (!event_pred)
-			goto oom;
+static void parse_init(struct filter_parse_state *ps,
+		       struct filter_op *ops,
+		       char *infix_string)
+{
+	memset(ps, '\0', sizeof(*ps));
 
-		err = filter_add_pred(call, event_pred);
-		if (err)
-			filter_free_pred(event_pred);
-		if (err == -ENOMEM)
-			goto oom;
+	ps->infix.string = infix_string;
+	ps->infix.cnt = strlen(infix_string);
+	ps->ops = ops;
+
+	INIT_LIST_HEAD(&ps->opstack);
+	INIT_LIST_HEAD(&ps->postfix);
+}
+
+static char infix_next(struct filter_parse_state *ps)
+{
+	ps->infix.cnt--;
+
+	return ps->infix.string[ps->infix.tail++];
+}
+
+static char infix_peek(struct filter_parse_state *ps)
+{
+	if (ps->infix.tail == strlen(ps->infix.string))
+		return 0;
+
+	return ps->infix.string[ps->infix.tail];
+}
+
+static void infix_advance(struct filter_parse_state *ps)
+{
+	ps->infix.cnt--;
+	ps->infix.tail++;
+}
+
+static inline int is_precedence_lower(struct filter_parse_state *ps,
+				      int a, int b)
+{
+	return ps->ops[a].precedence < ps->ops[b].precedence;
+}
+
+static inline int is_op_char(struct filter_parse_state *ps, char c)
+{
+	int i;
+
+	for (i = 0; strcmp(ps->ops[i].string, "OP_NONE"); i++) {
+		if (ps->ops[i].string[0] == c)
+			return 1;
 	}
 
 	return 0;
+}
 
-oom:
-	system->preds[i] = NULL;
-	return -ENOMEM;
+static int infix_get_op(struct filter_parse_state *ps, char firstc)
+{
+	char nextc = infix_peek(ps);
+	char opstr[3];
+	int i;
+
+	opstr[0] = firstc;
+	opstr[1] = nextc;
+	opstr[2] = '\0';
+
+	for (i = 0; strcmp(ps->ops[i].string, "OP_NONE"); i++) {
+		if (!strcmp(opstr, ps->ops[i].string)) {
+			infix_advance(ps);
+			return ps->ops[i].id;
+		}
+	}
+
+	opstr[1] = '\0';
+
+	for (i = 0; strcmp(ps->ops[i].string, "OP_NONE"); i++) {
+		if (!strcmp(opstr, ps->ops[i].string))
+			return ps->ops[i].id;
+	}
+
+	return OP_NONE;
 }
 
-int filter_parse(char **pbuf, struct filter_pred *pred)
+static inline void clear_operand_string(struct filter_parse_state *ps)
 {
-	char *tmp, *tok, *val_str = NULL;
-	int tok_n = 0;
+	memset(ps->operand.string, '\0', MAX_FILTER_STR_VAL);
+	ps->operand.tail = 0;
+}
 
-	/* field ==/!= number, or/and field ==/!= number, number */
-	while ((tok = strsep(pbuf, " \n"))) {
-		if (tok_n == 0) {
-			if (!strcmp(tok, "0")) {
-				pred->clear = 1;
-				return 0;
-			} else if (!strcmp(tok, "&&")) {
-				pred->or = 0;
-				pred->compound = 1;
-			} else if (!strcmp(tok, "||")) {
-				pred->or = 1;
-				pred->compound = 1;
-			} else
-				pred->field_name = tok;
-			tok_n = 1;
+static inline int append_operand_char(struct filter_parse_state *ps, char c)
+{
+	if (ps->operand.tail == MAX_FILTER_STR_VAL - 1)
+		return -EINVAL;
+
+	ps->operand.string[ps->operand.tail++] = c;
+
+	return 0;
+}
+
+static int filter_opstack_push(struct filter_parse_state *ps, int op)
+{
+	struct opstack_op *opstack_op;
+
+	opstack_op = kmalloc(sizeof(*opstack_op), GFP_KERNEL);
+	if (!opstack_op)
+		return -ENOMEM;
+
+	opstack_op->op = op;
+	list_add(&opstack_op->list, &ps->opstack);
+
+	return 0;
+}
+
+static int filter_opstack_empty(struct filter_parse_state *ps)
+{
+	return list_empty(&ps->opstack);
+}
+
+static int filter_opstack_top(struct filter_parse_state *ps)
+{
+	struct opstack_op *opstack_op;
+
+	if (filter_opstack_empty(ps))
+		return OP_NONE;
+
+	opstack_op = list_first_entry(&ps->opstack, struct opstack_op, list);
+
+	return opstack_op->op;
+}
+
+static int filter_opstack_pop(struct filter_parse_state *ps)
+{
+	struct opstack_op *opstack_op;
+	int op;
+
+	if (filter_opstack_empty(ps))
+		return OP_NONE;
+
+	opstack_op = list_first_entry(&ps->opstack, struct opstack_op, list);
+	op = opstack_op->op;
+	list_del(&opstack_op->list);
+
+	kfree(opstack_op);
+
+	return op;
+}
+
+static void filter_opstack_clear(struct filter_parse_state *ps)
+{
+	while (!filter_opstack_empty(ps))
+		filter_opstack_pop(ps);
+}
+
+static char *curr_operand(struct filter_parse_state *ps)
+{
+	return ps->operand.string;
+}
+
+static int postfix_append_operand(struct filter_parse_state *ps, char *operand)
+{
+	struct postfix_elt *elt;
+
+	elt = kmalloc(sizeof(*elt), GFP_KERNEL);
+	if (!elt)
+		return -ENOMEM;
+
+	elt->op = OP_NONE;
+	elt->operand = kstrdup(operand, GFP_KERNEL);
+	if (!elt->operand) {
+		kfree(elt);
+		return -ENOMEM;
+	}
+
+	list_add_tail(&elt->list, &ps->postfix);
+
+	return 0;
+}
+
+static int postfix_append_op(struct filter_parse_state *ps, int op)
+{
+	struct postfix_elt *elt;
+
+	elt = kmalloc(sizeof(*elt), GFP_KERNEL);
+	if (!elt)
+		return -ENOMEM;
+
+	elt->op = op;
+	elt->operand = NULL;
+
+	list_add_tail(&elt->list, &ps->postfix);
+
+	return 0;
+}
+
+static void postfix_clear(struct filter_parse_state *ps)
+{
+	struct postfix_elt *elt;
+
+	while (!list_empty(&ps->postfix)) {
+		elt = list_first_entry(&ps->postfix, struct postfix_elt, list);
+		kfree(elt->operand);
+		list_del(&elt->list);
+	}
+}
+
+static int filter_parse(struct filter_parse_state *ps)
+{
+	int in_string = 0;
+	int op, top_op;
+	char ch;
+
+	while ((ch = infix_next(ps))) {
+		if (ch == '"') {
+			in_string ^= 1;
 			continue;
 		}
-		if (tok_n == 1) {
-			if (!pred->field_name)
-				pred->field_name = tok;
-			else if (!strcmp(tok, "!="))
-				pred->not = 1;
-			else if (!strcmp(tok, "=="))
-				pred->not = 0;
-			else {
-				pred->field_name = NULL;
+
+		if (in_string)
+			goto parse_operand;
+
+		if (isspace(ch))
+			continue;
+
+		if (is_op_char(ps, ch)) {
+			op = infix_get_op(ps, ch);
+			if (op == OP_NONE) {
+				parse_error(ps, FILT_ERR_INVALID_OP, 0);
 				return -EINVAL;
 			}
-			tok_n = 2;
+
+			if (strlen(curr_operand(ps))) {
+				postfix_append_operand(ps, curr_operand(ps));
+				clear_operand_string(ps);
+			}
+
+			while (!filter_opstack_empty(ps)) {
+				top_op = filter_opstack_top(ps);
+				if (!is_precedence_lower(ps, top_op, op)) {
+					top_op = filter_opstack_pop(ps);
+					postfix_append_op(ps, top_op);
+					continue;
+				}
+				break;
+			}
+
+			filter_opstack_push(ps, op);
 			continue;
 		}
-		if (tok_n == 2) {
-			if (pred->compound) {
-				if (!strcmp(tok, "!="))
-					pred->not = 1;
-				else if (!strcmp(tok, "=="))
-					pred->not = 0;
-				else {
-					pred->field_name = NULL;
-					return -EINVAL;
-				}
-			} else {
-				val_str = tok;
-				break; /* done */
+
+		if (ch == '(') {
+			filter_opstack_push(ps, OP_OPEN_PAREN);
+			continue;
+		}
+
+		if (ch == ')') {
+			if (strlen(curr_operand(ps))) {
+				postfix_append_operand(ps, curr_operand(ps));
+				clear_operand_string(ps);
+			}
+
+			top_op = filter_opstack_pop(ps);
+			while (top_op != OP_NONE) {
+				if (top_op == OP_OPEN_PAREN)
+					break;
+				postfix_append_op(ps, top_op);
+				top_op = filter_opstack_pop(ps);
+			}
+			if (top_op == OP_NONE) {
+				parse_error(ps, FILT_ERR_UNBALANCED_PAREN, 0);
+				return -EINVAL;
 			}
-			tok_n = 3;
 			continue;
 		}
-		if (tok_n == 3) {
-			val_str = tok;
-			break; /* done */
+parse_operand:
+		if (append_operand_char(ps, ch)) {
+			parse_error(ps, FILT_ERR_OPERAND_TOO_LONG, 0);
+			return -EINVAL;
 		}
 	}
 
-	if (!val_str) {
-		pred->field_name = NULL;
-		return -EINVAL;
+	if (strlen(curr_operand(ps)))
+		postfix_append_operand(ps, curr_operand(ps));
+
+	while (!filter_opstack_empty(ps)) {
+		top_op = filter_opstack_pop(ps);
+		if (top_op == OP_NONE)
+			break;
+		if (top_op == OP_OPEN_PAREN) {
+			parse_error(ps, FILT_ERR_UNBALANCED_PAREN, 0);
+			return -EINVAL;
+		}
+		postfix_append_op(ps, top_op);
 	}
 
-	pred->field_name = kstrdup(pred->field_name, GFP_KERNEL);
-	if (!pred->field_name)
-		return -ENOMEM;
+	return 0;
+}
 
-	pred->val = simple_strtoull(val_str, &tmp, 0);
-	if (tmp == val_str) {
-		pred->str_val = kstrdup(val_str, GFP_KERNEL);
-		if (!pred->str_val)
-			return -ENOMEM;
-	} else if (*tmp != '\0')
+static struct filter_pred *create_pred(int op, char *operand1, char *operand2)
+{
+	struct filter_pred *pred;
+
+	pred = kzalloc(sizeof(*pred), GFP_KERNEL);
+	if (!pred)
+		return NULL;
+
+	pred->field_name = kstrdup(operand1, GFP_KERNEL);
+	if (!pred->field_name) {
+		kfree(pred);
+		return NULL;
+	}
+
+	strcpy(pred->str_val, operand2);
+	pred->str_len = strlen(operand2);
+
+	pred->op = op;
+
+	return pred;
+}
+
+static struct filter_pred *create_logical_pred(int op)
+{
+	struct filter_pred *pred;
+
+	pred = kzalloc(sizeof(*pred), GFP_KERNEL);
+	if (!pred)
+		return NULL;
+
+	pred->op = op;
+
+	return pred;
+}
+
+static int check_preds(struct filter_parse_state *ps)
+{
+	int n_normal_preds = 0, n_logical_preds = 0;
+	struct postfix_elt *elt;
+
+	list_for_each_entry(elt, &ps->postfix, list) {
+		if (elt->op == OP_NONE)
+			continue;
+
+		if (elt->op == OP_AND || elt->op == OP_OR) {
+			n_logical_preds++;
+			continue;
+		}
+		n_normal_preds++;
+	}
+
+	if (!n_normal_preds || n_logical_preds >= n_normal_preds) {
+		parse_error(ps, FILT_ERR_INVALID_FILTER, 0);
 		return -EINVAL;
+	}
 
 	return 0;
 }
 
+static int replace_preds(struct event_subsystem *system,
+			 struct ftrace_event_call *call,
+			 struct filter_parse_state *ps,
+			 char *filter_string)
+{
+	char *operand1 = NULL, *operand2 = NULL;
+	struct filter_pred *pred;
+	struct postfix_elt *elt;
+	int err;
+
+	err = check_preds(ps);
+	if (err)
+		return err;
+
+	list_for_each_entry(elt, &ps->postfix, list) {
+		if (elt->op == OP_NONE) {
+			if (!operand1)
+				operand1 = elt->operand;
+			else if (!operand2)
+				operand2 = elt->operand;
+			else {
+				parse_error(ps, FILT_ERR_TOO_MANY_OPERANDS, 0);
+				return -EINVAL;
+			}
+			continue;
+		}
+
+		if (elt->op == OP_AND || elt->op == OP_OR) {
+			pred = create_logical_pred(elt->op);
+			if (call) {
+				err = filter_add_pred(ps, call, pred);
+				filter_free_pred(pred);
+			} else
+				err = filter_add_subsystem_pred(ps, system,
+							pred, filter_string);
+			if (err)
+				return err;
+
+			operand1 = operand2 = NULL;
+			continue;
+		}
+
+		if (!operand1 || !operand2) {
+			parse_error(ps, FILT_ERR_MISSING_FIELD, 0);
+			return -EINVAL;
+		}
+
+		pred = create_pred(elt->op, operand1, operand2);
+		if (call) {
+			err = filter_add_pred(ps, call, pred);
+			filter_free_pred(pred);
+		} else
+			err = filter_add_subsystem_pred(ps, system, pred,
+							filter_string);
+		if (err)
+			return err;
+
+		operand1 = operand2 = NULL;
+	}
+
+	return 0;
+}
+
+int apply_event_filter(struct ftrace_event_call *call, char *filter_string)
+{
+	int err;
+
+	struct filter_parse_state *ps;
+
+	mutex_lock(&filter_mutex);
+
+	if (!strcmp(strstrip(filter_string), "0")) {
+		filter_disable_preds(call);
+		remove_filter_string(call->filter);
+		mutex_unlock(&filter_mutex);
+		return 0;
+	}
+
+	err = -ENOMEM;
+	ps = kzalloc(sizeof(*ps), GFP_KERNEL);
+	if (!ps)
+		goto out_unlock;
+
+	filter_disable_preds(call);
+	replace_filter_string(call->filter, filter_string);
+
+	parse_init(ps, filter_ops, filter_string);
+	err = filter_parse(ps);
+	if (err) {
+		append_filter_err(ps, call->filter);
+		goto out;
+	}
+
+	err = replace_preds(NULL, call, ps, filter_string);
+	if (err)
+		append_filter_err(ps, call->filter);
+
+out:
+	filter_opstack_clear(ps);
+	postfix_clear(ps);
+	kfree(ps);
+out_unlock:
+	mutex_unlock(&filter_mutex);
+
+	return err;
+}
+
+int apply_subsystem_event_filter(struct event_subsystem *system,
+				 char *filter_string)
+{
+	int err;
+
+	struct filter_parse_state *ps;
+
+	mutex_lock(&filter_mutex);
+
+	if (!strcmp(strstrip(filter_string), "0")) {
+		filter_free_subsystem_preds(system);
+		remove_filter_string(system->filter);
+		mutex_unlock(&filter_mutex);
+		return 0;
+	}
+
+	err = -ENOMEM;
+	ps = kzalloc(sizeof(*ps), GFP_KERNEL);
+	if (!ps)
+		goto out_unlock;
+
+	filter_free_subsystem_preds(system);
+	replace_filter_string(system->filter, filter_string);
+
+	parse_init(ps, filter_ops, filter_string);
+	err = filter_parse(ps);
+	if (err) {
+		append_filter_err(ps, system->filter);
+		goto out;
+	}
+
+	err = replace_preds(system, NULL, ps, filter_string);
+	if (err)
+		append_filter_err(ps, system->filter);
+
+out:
+	filter_opstack_clear(ps);
+	postfix_clear(ps);
+	kfree(ps);
+out_unlock:
+	mutex_unlock(&filter_mutex);
+
+	return err;
+}
 
diff --git a/kernel/trace/trace_events_stage_1.h b/kernel/trace/trace_events_stage_1.h
deleted file mode 100644
index 38985f9b379..00000000000
--- a/kernel/trace/trace_events_stage_1.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Stage 1 of the trace events.
- *
- * Override the macros in <trace/trace_event_types.h> to include the following:
- *
- * struct ftrace_raw_<call> {
- *	struct trace_entry		ent;
- *	<type>				<item>;
- *	<type2>				<item2>[<len>];
- *	[...]
- * };
- *
- * The <type> <item> is created by the __field(type, item) macro or
- * the __array(type2, item2, len) macro.
- * We simply do "type item;", and that will create the fields
- * in the structure.
- */
-
-#undef TRACE_FORMAT
-#define TRACE_FORMAT(call, proto, args, fmt)
-
-#undef __array
-#define __array(type, item, len)	type	item[len];
-
-#undef __field
-#define __field(type, item)		type	item;
-
-#undef TP_STRUCT__entry
-#define TP_STRUCT__entry(args...) args
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
-	struct ftrace_raw_##name {				\
-		struct trace_entry	ent;			\
-		tstruct						\
-	};							\
-	static struct ftrace_event_call event_##name
-
-#include <trace/trace_event_types.h>
diff --git a/kernel/trace/trace_events_stage_2.h b/kernel/trace/trace_events_stage_2.h
deleted file mode 100644
index d363c6672c6..00000000000
--- a/kernel/trace/trace_events_stage_2.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Stage 2 of the trace events.
- *
- * Override the macros in <trace/trace_event_types.h> to include the following:
- *
- * enum print_line_t
- * ftrace_raw_output_<call>(struct trace_iterator *iter, int flags)
- * {
- *	struct trace_seq *s = &iter->seq;
- *	struct ftrace_raw_<call> *field; <-- defined in stage 1
- *	struct trace_entry *entry;
- *	int ret;
- *
- *	entry = iter->ent;
- *
- *	if (entry->type != event_<call>.id) {
- *		WARN_ON_ONCE(1);
- *		return TRACE_TYPE_UNHANDLED;
- *	}
- *
- *	field = (typeof(field))entry;
- *
- *	ret = trace_seq_printf(s, <TP_printk> "\n");
- *	if (!ret)
- *		return TRACE_TYPE_PARTIAL_LINE;
- *
- *	return TRACE_TYPE_HANDLED;
- * }
- *
- * This is the method used to print the raw event to the trace
- * output format. Note, this is not needed if the data is read
- * in binary.
- */
-
-#undef __entry
-#define __entry field
-
-#undef TP_printk
-#define TP_printk(fmt, args...) fmt "\n", args
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
-enum print_line_t							\
-ftrace_raw_output_##call(struct trace_iterator *iter, int flags)	\
-{									\
-	struct trace_seq *s = &iter->seq;				\
-	struct ftrace_raw_##call *field;				\
-	struct trace_entry *entry;					\
-	int ret;							\
-									\
-	entry = iter->ent;						\
-									\
-	if (entry->type != event_##call.id) {				\
-		WARN_ON_ONCE(1);					\
-		return TRACE_TYPE_UNHANDLED;				\
-	}								\
-									\
-	field = (typeof(field))entry;					\
-									\
-	ret = trace_seq_printf(s, #call ": " print);			\
-	if (!ret)							\
-		return TRACE_TYPE_PARTIAL_LINE;				\
-									\
-	return TRACE_TYPE_HANDLED;					\
-}
-	
-#include <trace/trace_event_types.h>
-
-/*
- * Setup the showing format of trace point.
- *
- * int
- * ftrace_format_##call(struct trace_seq *s)
- * {
- *	struct ftrace_raw_##call field;
- *	int ret;
- *
- *	ret = trace_seq_printf(s, #type " " #item ";"
- *			       " offset:%u; size:%u;\n",
- *			       offsetof(struct ftrace_raw_##call, item),
- *			       sizeof(field.type));
- *
- * }
- */
-
-#undef TP_STRUCT__entry
-#define TP_STRUCT__entry(args...) args
-
-#undef __field
-#define __field(type, item)					\
-	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
-			       "offset:%u;\tsize:%u;\n",		\
-			       (unsigned int)offsetof(typeof(field), item), \
-			       (unsigned int)sizeof(field.item));	\
-	if (!ret)							\
-		return 0;
-
-#undef __array
-#define __array(type, item, len)						\
-	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t"	\
-			       "offset:%u;\tsize:%u;\n",		\
-			       (unsigned int)offsetof(typeof(field), item), \
-			       (unsigned int)sizeof(field.item));	\
-	if (!ret)							\
-		return 0;
-
-#undef __entry
-#define __entry REC
-
-#undef TP_printk
-#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
-
-#undef TP_fast_assign
-#define TP_fast_assign(args...) args
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
-static int								\
-ftrace_format_##call(struct trace_seq *s)				\
-{									\
-	struct ftrace_raw_##call field;					\
-	int ret;							\
-									\
-	tstruct;							\
-									\
-	trace_seq_printf(s, "\nprint fmt: " print);			\
-									\
-	return ret;							\
-}
-
-#include <trace/trace_event_types.h>
-
-#undef __field
-#define __field(type, item)						\
-	ret = trace_define_field(event_call, #type, #item,		\
-				 offsetof(typeof(field), item),		\
-				 sizeof(field.item));			\
-	if (ret)							\
-		return ret;
-
-#undef __array
-#define __array(type, item, len)					\
-	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
-				 offsetof(typeof(field), item),		\
-				 sizeof(field.item));			\
-	if (ret)							\
-		return ret;
-
-#define __common_field(type, item)					\
-	ret = trace_define_field(event_call, #type, "common_" #item,	\
-				 offsetof(typeof(field.ent), item),	\
-				 sizeof(field.ent.item));		\
-	if (ret)							\
-		return ret;
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
-int									\
-ftrace_define_fields_##call(void)					\
-{									\
-	struct ftrace_raw_##call field;					\
-	struct ftrace_event_call *event_call = &event_##call;		\
-	int ret;							\
-									\
-	__common_field(unsigned char, type);				\
-	__common_field(unsigned char, flags);				\
-	__common_field(unsigned char, preempt_count);			\
-	__common_field(int, pid);					\
-	__common_field(int, tgid);					\
-									\
-	tstruct;							\
-									\
-	return ret;							\
-}
-
-#include <trace/trace_event_types.h>
diff --git a/kernel/trace/trace_events_stage_3.h b/kernel/trace/trace_events_stage_3.h
deleted file mode 100644
index 9d2fa78cecc..00000000000
--- a/kernel/trace/trace_events_stage_3.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Stage 3 of the trace events.
- *
- * Override the macros in <trace/trace_event_types.h> to include the following:
- *
- * static void ftrace_event_<call>(proto)
- * {
- *	event_trace_printk(_RET_IP_, "<call>: " <fmt>);
- * }
- *
- * static int ftrace_reg_event_<call>(void)
- * {
- *	int ret;
- *
- *	ret = register_trace_<call>(ftrace_event_<call>);
- *	if (!ret)
- *		pr_info("event trace: Could not activate trace point "
- *			"probe to  <call>");
- *	return ret;
- * }
- *
- * static void ftrace_unreg_event_<call>(void)
- * {
- *	unregister_trace_<call>(ftrace_event_<call>);
- * }
- *
- * For those macros defined with TRACE_FORMAT:
- *
- * static struct ftrace_event_call __used
- * __attribute__((__aligned__(4)))
- * __attribute__((section("_ftrace_events"))) event_<call> = {
- *	.name			= "<call>",
- *	.regfunc		= ftrace_reg_event_<call>,
- *	.unregfunc		= ftrace_unreg_event_<call>,
- * }
- *
- *
- * For those macros defined with TRACE_EVENT:
- *
- * static struct ftrace_event_call event_<call>;
- *
- * static void ftrace_raw_event_<call>(proto)
- * {
- *	struct ring_buffer_event *event;
- *	struct ftrace_raw_<call> *entry; <-- defined in stage 1
- *	unsigned long irq_flags;
- *	int pc;
- *
- *	local_save_flags(irq_flags);
- *	pc = preempt_count();
- *
- *	event = trace_current_buffer_lock_reserve(event_<call>.id,
- *				  sizeof(struct ftrace_raw_<call>),
- *				  irq_flags, pc);
- *	if (!event)
- *		return;
- *	entry	= ring_buffer_event_data(event);
- *
- *	<assign>;  <-- Here we assign the entries by the __field and
- *			__array macros.
- *
- *	trace_current_buffer_unlock_commit(event, irq_flags, pc);
- * }
- *
- * static int ftrace_raw_reg_event_<call>(void)
- * {
- *	int ret;
- *
- *	ret = register_trace_<call>(ftrace_raw_event_<call>);
- *	if (!ret)
- *		pr_info("event trace: Could not activate trace point "
- *			"probe to <call>");
- *	return ret;
- * }
- *
- * static void ftrace_unreg_event_<call>(void)
- * {
- *	unregister_trace_<call>(ftrace_raw_event_<call>);
- * }
- *
- * static struct trace_event ftrace_event_type_<call> = {
- *	.trace			= ftrace_raw_output_<call>, <-- stage 2
- * };
- *
- * static int ftrace_raw_init_event_<call>(void)
- * {
- *	int id;
- *
- *	id = register_ftrace_event(&ftrace_event_type_<call>);
- *	if (!id)
- *		return -ENODEV;
- *	event_<call>.id = id;
- *	return 0;
- * }
- *
- * static struct ftrace_event_call __used
- * __attribute__((__aligned__(4)))
- * __attribute__((section("_ftrace_events"))) event_<call> = {
- *	.name			= "<call>",
- *	.system			= "<system>",
- *	.raw_init		= ftrace_raw_init_event_<call>,
- *	.regfunc		= ftrace_reg_event_<call>,
- *	.unregfunc		= ftrace_unreg_event_<call>,
- *	.show_format		= ftrace_format_<call>,
- * }
- *
- */
-
-#undef TP_FMT
-#define TP_FMT(fmt, args...)	fmt "\n", ##args
-
-#ifdef CONFIG_EVENT_PROFILE
-#define _TRACE_PROFILE(call, proto, args)				\
-static void ftrace_profile_##call(proto)				\
-{									\
-	extern void perf_tpcounter_event(int);				\
-	perf_tpcounter_event(event_##call.id);				\
-}									\
-									\
-static int ftrace_profile_enable_##call(struct ftrace_event_call *call) \
-{									\
-	int ret = 0;							\
-									\
-	if (!atomic_inc_return(&call->profile_count))			\
-		ret = register_trace_##call(ftrace_profile_##call);	\
-									\
-	return ret;							\
-}									\
-									\
-static void ftrace_profile_disable_##call(struct ftrace_event_call *call) \
-{									\
-	if (atomic_add_negative(-1, &call->profile_count))		\
-		unregister_trace_##call(ftrace_profile_##call);		\
-}
-
-#define _TRACE_PROFILE_INIT(call)					\
-	.profile_count = ATOMIC_INIT(-1),				\
-	.profile_enable = ftrace_profile_enable_##call,			\
-	.profile_disable = ftrace_profile_disable_##call,
-
-#else
-#define _TRACE_PROFILE(call, proto, args)
-#define _TRACE_PROFILE_INIT(call)
-#endif
-
-#define _TRACE_FORMAT(call, proto, args, fmt)				\
-static void ftrace_event_##call(proto)					\
-{									\
-	event_trace_printk(_RET_IP_, #call ": " fmt);			\
-}									\
-									\
-static int ftrace_reg_event_##call(void)				\
-{									\
-	int ret;							\
-									\
-	ret = register_trace_##call(ftrace_event_##call);		\
-	if (ret)							\
-		pr_info("event trace: Could not activate trace point "	\
-			"probe to " #call "\n");			\
-	return ret;							\
-}									\
-									\
-static void ftrace_unreg_event_##call(void)				\
-{									\
-	unregister_trace_##call(ftrace_event_##call);			\
-}									\
-									\
-static struct ftrace_event_call event_##call;				\
-									\
-static int ftrace_init_event_##call(void)				\
-{									\
-	int id;								\
-									\
-	id = register_ftrace_event(NULL);				\
-	if (!id)							\
-		return -ENODEV;						\
-	event_##call.id = id;						\
-	return 0;							\
-}
-
-#undef TRACE_FORMAT
-#define TRACE_FORMAT(call, proto, args, fmt)				\
-_TRACE_FORMAT(call, PARAMS(proto), PARAMS(args), PARAMS(fmt))		\
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args))			\
-static struct ftrace_event_call __used					\
-__attribute__((__aligned__(4)))						\
-__attribute__((section("_ftrace_events"))) event_##call = {		\
-	.name			= #call,				\
-	.system			= __stringify(TRACE_SYSTEM),		\
-	.raw_init		= ftrace_init_event_##call,		\
-	.regfunc		= ftrace_reg_event_##call,		\
-	.unregfunc		= ftrace_unreg_event_##call,		\
-	_TRACE_PROFILE_INIT(call)					\
-}
-
-#undef __entry
-#define __entry entry
-
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args))			\
-									\
-static struct ftrace_event_call event_##call;				\
-									\
-static void ftrace_raw_event_##call(proto)				\
-{									\
-	struct ftrace_event_call *call = &event_##call;			\
-	struct ring_buffer_event *event;				\
-	struct ftrace_raw_##call *entry;				\
-	unsigned long irq_flags;					\
-	int pc;								\
-									\
-	local_save_flags(irq_flags);					\
-	pc = preempt_count();						\
-									\
-	event = trace_current_buffer_lock_reserve(event_##call.id,	\
-				  sizeof(struct ftrace_raw_##call),	\
-				  irq_flags, pc);			\
-	if (!event)							\
-		return;							\
-	entry	= ring_buffer_event_data(event);			\
-									\
-	assign;								\
-									\
-	if (call->preds && !filter_match_preds(call, entry))		\
-		ring_buffer_event_discard(event);			\
-									\
-	trace_nowake_buffer_unlock_commit(event, irq_flags, pc);	\
-									\
-}									\
-									\
-static int ftrace_raw_reg_event_##call(void)				\
-{									\
-	int ret;							\
-									\
-	ret = register_trace_##call(ftrace_raw_event_##call);		\
-	if (ret)							\
-		pr_info("event trace: Could not activate trace point "	\
-			"probe to " #call "\n");			\
-	return ret;							\
-}									\
-									\
-static void ftrace_raw_unreg_event_##call(void)				\
-{									\
-	unregister_trace_##call(ftrace_raw_event_##call);		\
-}									\
-									\
-static struct trace_event ftrace_event_type_##call = {			\
-	.trace			= ftrace_raw_output_##call,		\
-};									\
-									\
-static int ftrace_raw_init_event_##call(void)				\
-{									\
-	int id;								\
-									\
-	id = register_ftrace_event(&ftrace_event_type_##call);		\
-	if (!id)							\
-		return -ENODEV;						\
-	event_##call.id = id;						\
-	INIT_LIST_HEAD(&event_##call.fields);				\
-	return 0;							\
-}									\
-									\
-static struct ftrace_event_call __used					\
-__attribute__((__aligned__(4)))						\
-__attribute__((section("_ftrace_events"))) event_##call = {		\
-	.name			= #call,				\
-	.system			= __stringify(TRACE_SYSTEM),		\
-	.raw_init		= ftrace_raw_init_event_##call,		\
-	.regfunc		= ftrace_raw_reg_event_##call,		\
-	.unregfunc		= ftrace_raw_unreg_event_##call,	\
-	.show_format		= ftrace_format_##call,			\
-	.define_fields		= ftrace_define_fields_##call,		\
-	_TRACE_PROFILE_INIT(call)					\
-}
-
-#include <trace/trace_event_types.h>
-
-#undef _TRACE_PROFILE
-#undef _TRACE_PROFILE_INIT
-
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index 07a22c33ebf..d06cf898dc8 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -19,8 +19,12 @@
 #undef TRACE_STRUCT
 #define TRACE_STRUCT(args...) args
 
+extern void __bad_type_size(void);
+
 #undef TRACE_FIELD
 #define TRACE_FIELD(type, item, assign)					\
+	if (sizeof(type) != sizeof(field.item))				\
+		__bad_type_size();					\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
 			       "offset:%u;\tsize:%u;\n",		\
 			       (unsigned int)offsetof(typeof(field), item), \
@@ -30,7 +34,7 @@
 
 
 #undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type_item, item, cmd)			\
+#define TRACE_FIELD_SPECIAL(type_item, item, len, cmd)			\
 	ret = trace_seq_printf(s, "\tfield special:" #type_item ";\t"	\
 			       "offset:%u;\tsize:%u;\n",		\
 			       (unsigned int)offsetof(typeof(field), item), \
@@ -46,6 +50,9 @@
 	if (!ret)							\
 		return 0;
 
+#undef TRACE_FIELD_SIGN
+#define TRACE_FIELD_SIGN(type, item, assign, is_signed)	\
+	TRACE_FIELD(type, item, assign)
 
 #undef TP_RAW_FMT
 #define TP_RAW_FMT(args...) args
@@ -65,6 +72,22 @@ ftrace_format_##call(struct trace_seq *s)				\
 	return ret;							\
 }
 
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct,	\
+				    tpfmt)				\
+static int								\
+ftrace_format_##call(struct trace_seq *s)				\
+{									\
+	struct args field;						\
+	int ret;							\
+									\
+	tstruct;							\
+									\
+	trace_seq_printf(s, "\nprint fmt: \"%s\"\n", tpfmt);		\
+									\
+	return ret;							\
+}
+
 #include "trace_event_types.h"
 
 #undef TRACE_ZERO_CHAR
@@ -78,6 +101,10 @@ ftrace_format_##call(struct trace_seq *s)				\
 #define TRACE_FIELD(type, item, assign)\
 	entry->item = assign;
 
+#undef TRACE_FIELD_SIGN
+#define TRACE_FIELD_SIGN(type, item, assign, is_signed)	\
+	TRACE_FIELD(type, item, assign)
+
 #undef TP_CMD
 #define TP_CMD(cmd...)	cmd
 
@@ -85,18 +112,95 @@ ftrace_format_##call(struct trace_seq *s)				\
 #define TRACE_ENTRY	entry
 
 #undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type_item, item, cmd) \
+#define TRACE_FIELD_SPECIAL(type_item, item, len, cmd)	\
 	cmd;
 
 #undef TRACE_EVENT_FORMAT
 #define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
+int ftrace_define_fields_##call(void);					\
+static int ftrace_raw_init_event_##call(void);				\
+									\
+struct ftrace_event_call __used						\
+__attribute__((__aligned__(4)))						\
+__attribute__((section("_ftrace_events"))) event_##call = {		\
+	.name			= #call,				\
+	.id			= proto,				\
+	.system			= __stringify(TRACE_SYSTEM),		\
+	.raw_init		= ftrace_raw_init_event_##call,		\
+	.show_format		= ftrace_format_##call,			\
+	.define_fields		= ftrace_define_fields_##call,		\
+};									\
+static int ftrace_raw_init_event_##call(void)				\
+{									\
+	INIT_LIST_HEAD(&event_##call.fields);				\
+	init_preds(&event_##call);					\
+	return 0;							\
+}									\
+
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct,	\
+				    tpfmt)				\
 									\
-static struct ftrace_event_call __used					\
+struct ftrace_event_call __used						\
 __attribute__((__aligned__(4)))						\
 __attribute__((section("_ftrace_events"))) event_##call = {		\
 	.name			= #call,				\
 	.id			= proto,				\
 	.system			= __stringify(TRACE_SYSTEM),		\
 	.show_format		= ftrace_format_##call,			\
+};
+
+#include "trace_event_types.h"
+
+#undef TRACE_FIELD
+#define TRACE_FIELD(type, item, assign)					\
+	ret = trace_define_field(event_call, #type, #item,		\
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item), is_signed_type(type));	\
+	if (ret)							\
+		return ret;
+
+#undef TRACE_FIELD_SPECIAL
+#define TRACE_FIELD_SPECIAL(type, item, len, cmd)			\
+	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item), 0);		\
+	if (ret)							\
+		return ret;
+
+#undef TRACE_FIELD_SIGN
+#define TRACE_FIELD_SIGN(type, item, assign, is_signed)			\
+	ret = trace_define_field(event_call, #type, #item,		\
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item), is_signed);	\
+	if (ret)							\
+		return ret;
+
+#undef TRACE_FIELD_ZERO_CHAR
+#define TRACE_FIELD_ZERO_CHAR(item)
+
+#undef TRACE_EVENT_FORMAT
+#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
+int									\
+ftrace_define_fields_##call(void)					\
+{									\
+	struct ftrace_event_call *event_call = &event_##call;		\
+	struct args field;						\
+	int ret;							\
+									\
+	__common_field(unsigned char, type, 0);				\
+	__common_field(unsigned char, flags, 0);			\
+	__common_field(unsigned char, preempt_count, 0);		\
+	__common_field(int, pid, 1);					\
+	__common_field(int, tgid, 1);					\
+									\
+	tstruct;							\
+									\
+	return ret;							\
 }
+
+#undef TRACE_EVENT_FORMAT_NOFILTER
+#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct,	\
+				    tpfmt)
+
 #include "trace_event_types.h"
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index d28687e7b3a..8b592418d8b 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -65,6 +65,12 @@ ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth)
 	if (!current->ret_stack)
 		return -EBUSY;
 
+	/*
+	 * We must make sure the ret_stack is tested before we read
+	 * anything else.
+	 */
+	smp_rmb();
+
 	/* The return trace stack is full */
 	if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
 		atomic_inc(&current->trace_overrun);
@@ -78,13 +84,14 @@ ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth)
 	current->ret_stack[index].ret = ret;
 	current->ret_stack[index].func = func;
 	current->ret_stack[index].calltime = calltime;
+	current->ret_stack[index].subtime = 0;
 	*depth = index;
 
 	return 0;
 }
 
 /* Retrieve a function return address to the trace stack on thread info.*/
-void
+static void
 ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
 {
 	int index;
@@ -104,9 +111,6 @@ ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
 	trace->calltime = current->ret_stack[index].calltime;
 	trace->overrun = atomic_read(&current->trace_overrun);
 	trace->depth = index;
-	barrier();
-	current->curr_ret_stack--;
-
 }
 
 /*
@@ -121,6 +125,8 @@ unsigned long ftrace_return_to_handler(void)
 	ftrace_pop_return_trace(&trace, &ret);
 	trace.rettime = trace_clock_local();
 	ftrace_graph_return(&trace);
+	barrier();
+	current->curr_ret_stack--;
 
 	if (unlikely(!ret)) {
 		ftrace_graph_stop();
@@ -426,8 +432,8 @@ print_graph_irq(struct trace_iterator *iter, unsigned long addr,
 	return TRACE_TYPE_HANDLED;
 }
 
-static enum print_line_t
-print_graph_duration(unsigned long long duration, struct trace_seq *s)
+enum print_line_t
+trace_print_graph_duration(unsigned long long duration, struct trace_seq *s)
 {
 	unsigned long nsecs_rem = do_div(duration, 1000);
 	/* log10(ULONG_MAX) + '\0' */
@@ -464,12 +470,23 @@ print_graph_duration(unsigned long long duration, struct trace_seq *s)
 		if (!ret)
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
+	return TRACE_TYPE_HANDLED;
+}
+
+static enum print_line_t
+print_graph_duration(unsigned long long duration, struct trace_seq *s)
+{
+	int ret;
+
+	ret = trace_print_graph_duration(duration, s);
+	if (ret != TRACE_TYPE_HANDLED)
+		return ret;
 
 	ret = trace_seq_printf(s, "|  ");
 	if (!ret)
 		return TRACE_TYPE_PARTIAL_LINE;
-	return TRACE_TYPE_HANDLED;
 
+	return TRACE_TYPE_HANDLED;
 }
 
 /* Case of a leaf function on its call entry */
diff --git a/kernel/trace/trace_hw_branches.c b/kernel/trace/trace_hw_branches.c
index 7bfdf4c2347..ca7d7c4d0c2 100644
--- a/kernel/trace/trace_hw_branches.c
+++ b/kernel/trace/trace_hw_branches.c
@@ -1,10 +1,9 @@
 /*
- * h/w branch tracer for x86 based on bts
+ * h/w branch tracer for x86 based on BTS
  *
  * Copyright (C) 2008-2009 Intel Corporation.
  * Markus Metzger <markus.t.metzger@gmail.com>, 2008-2009
  */
-#include <linux/spinlock.h>
 #include <linux/kallsyms.h>
 #include <linux/debugfs.h>
 #include <linux/ftrace.h>
@@ -15,110 +14,119 @@
 
 #include <asm/ds.h>
 
-#include "trace.h"
 #include "trace_output.h"
+#include "trace.h"
 
 
-#define SIZEOF_BTS (1 << 13)
+#define BTS_BUFFER_SIZE (1 << 13)
 
-/*
- * The tracer lock protects the below per-cpu tracer array.
- * It needs to be held to:
- * - start tracing on all cpus
- * - stop tracing on all cpus
- * - start tracing on a single hotplug cpu
- * - stop tracing on a single hotplug cpu
- * - read the trace from all cpus
- * - read the trace from a single cpu
- */
-static DEFINE_SPINLOCK(bts_tracer_lock);
 static DEFINE_PER_CPU(struct bts_tracer *, tracer);
-static DEFINE_PER_CPU(unsigned char[SIZEOF_BTS], buffer);
+static DEFINE_PER_CPU(unsigned char[BTS_BUFFER_SIZE], buffer);
 
 #define this_tracer per_cpu(tracer, smp_processor_id())
-#define this_buffer per_cpu(buffer, smp_processor_id())
 
-static int __read_mostly trace_hw_branches_enabled;
+static int trace_hw_branches_enabled __read_mostly;
+static int trace_hw_branches_suspended __read_mostly;
 static struct trace_array *hw_branch_trace __read_mostly;
 
 
-/*
- * Start tracing on the current cpu.
- * The argument is ignored.
- *
- * pre: bts_tracer_lock must be locked.
- */
-static void bts_trace_start_cpu(void *arg)
+static void bts_trace_init_cpu(int cpu)
 {
-	if (this_tracer)
-		ds_release_bts(this_tracer);
-
-	this_tracer =
-		ds_request_bts(/* task = */ NULL, this_buffer, SIZEOF_BTS,
-			       /* ovfl = */ NULL, /* th = */ (size_t)-1,
-			       BTS_KERNEL);
-	if (IS_ERR(this_tracer)) {
-		this_tracer = NULL;
-		return;
-	}
+	per_cpu(tracer, cpu) =
+		ds_request_bts_cpu(cpu, per_cpu(buffer, cpu), BTS_BUFFER_SIZE,
+				   NULL, (size_t)-1, BTS_KERNEL);
+
+	if (IS_ERR(per_cpu(tracer, cpu)))
+		per_cpu(tracer, cpu) = NULL;
 }
 
-static void bts_trace_start(struct trace_array *tr)
+static int bts_trace_init(struct trace_array *tr)
 {
-	spin_lock(&bts_tracer_lock);
+	int cpu;
+
+	hw_branch_trace = tr;
+	trace_hw_branches_enabled = 0;
 
-	on_each_cpu(bts_trace_start_cpu, NULL, 1);
-	trace_hw_branches_enabled = 1;
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		bts_trace_init_cpu(cpu);
 
-	spin_unlock(&bts_tracer_lock);
+		if (likely(per_cpu(tracer, cpu)))
+			trace_hw_branches_enabled = 1;
+	}
+	trace_hw_branches_suspended = 0;
+	put_online_cpus();
+
+	/* If we could not enable tracing on a single cpu, we fail. */
+	return trace_hw_branches_enabled ? 0 : -EOPNOTSUPP;
 }
 
-/*
- * Stop tracing on the current cpu.
- * The argument is ignored.
- *
- * pre: bts_tracer_lock must be locked.
- */
-static void bts_trace_stop_cpu(void *arg)
+static void bts_trace_reset(struct trace_array *tr)
 {
-	if (this_tracer) {
-		ds_release_bts(this_tracer);
-		this_tracer = NULL;
+	int cpu;
+
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		if (likely(per_cpu(tracer, cpu))) {
+			ds_release_bts(per_cpu(tracer, cpu));
+			per_cpu(tracer, cpu) = NULL;
+		}
 	}
+	trace_hw_branches_enabled = 0;
+	trace_hw_branches_suspended = 0;
+	put_online_cpus();
 }
 
-static void bts_trace_stop(struct trace_array *tr)
+static void bts_trace_start(struct trace_array *tr)
 {
-	spin_lock(&bts_tracer_lock);
+	int cpu;
 
-	trace_hw_branches_enabled = 0;
-	on_each_cpu(bts_trace_stop_cpu, NULL, 1);
+	get_online_cpus();
+	for_each_online_cpu(cpu)
+		if (likely(per_cpu(tracer, cpu)))
+			ds_resume_bts(per_cpu(tracer, cpu));
+	trace_hw_branches_suspended = 0;
+	put_online_cpus();
+}
 
-	spin_unlock(&bts_tracer_lock);
+static void bts_trace_stop(struct trace_array *tr)
+{
+	int cpu;
+
+	get_online_cpus();
+	for_each_online_cpu(cpu)
+		if (likely(per_cpu(tracer, cpu)))
+			ds_suspend_bts(per_cpu(tracer, cpu));
+	trace_hw_branches_suspended = 1;
+	put_online_cpus();
 }
 
 static int __cpuinit bts_hotcpu_handler(struct notifier_block *nfb,
 				     unsigned long action, void *hcpu)
 {
-	unsigned int cpu = (unsigned long)hcpu;
-
-	spin_lock(&bts_tracer_lock);
-
-	if (!trace_hw_branches_enabled)
-		goto out;
+	int cpu = (long)hcpu;
 
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_DOWN_FAILED:
-		smp_call_function_single(cpu, bts_trace_start_cpu, NULL, 1);
+		/* The notification is sent with interrupts enabled. */
+		if (trace_hw_branches_enabled) {
+			bts_trace_init_cpu(cpu);
+
+			if (trace_hw_branches_suspended &&
+			    likely(per_cpu(tracer, cpu)))
+				ds_suspend_bts(per_cpu(tracer, cpu));
+		}
 		break;
+
 	case CPU_DOWN_PREPARE:
-		smp_call_function_single(cpu, bts_trace_stop_cpu, NULL, 1);
-		break;
+		/* The notification is sent with interrupts enabled. */
+		if (likely(per_cpu(tracer, cpu))) {
+			ds_release_bts(per_cpu(tracer, cpu));
+			per_cpu(tracer, cpu) = NULL;
+		}
 	}
 
- out:
-	spin_unlock(&bts_tracer_lock);
 	return NOTIFY_DONE;
 }
 
@@ -126,20 +134,6 @@ static struct notifier_block bts_hotcpu_notifier __cpuinitdata = {
 	.notifier_call = bts_hotcpu_handler
 };
 
-static int bts_trace_init(struct trace_array *tr)
-{
-	hw_branch_trace = tr;
-
-	bts_trace_start(tr);
-
-	return 0;
-}
-
-static void bts_trace_reset(struct trace_array *tr)
-{
-	bts_trace_stop(tr);
-}
-
 static void bts_trace_print_header(struct seq_file *m)
 {
 	seq_puts(m, "# CPU#        TO  <-  FROM\n");
@@ -147,10 +141,10 @@ static void bts_trace_print_header(struct seq_file *m)
 
 static enum print_line_t bts_trace_print_line(struct trace_iterator *iter)
 {
+	unsigned long symflags = TRACE_ITER_SYM_OFFSET;
 	struct trace_entry *entry = iter->ent;
 	struct trace_seq *seq = &iter->seq;
 	struct hw_branch_entry *it;
-	unsigned long symflags = TRACE_ITER_SYM_OFFSET;
 
 	trace_assign_type(it, entry);
 
@@ -168,6 +162,7 @@ static enum print_line_t bts_trace_print_line(struct trace_iterator *iter)
 
 void trace_hw_branch(u64 from, u64 to)
 {
+	struct ftrace_event_call *call = &event_hw_branch;
 	struct trace_array *tr = hw_branch_trace;
 	struct ring_buffer_event *event;
 	struct hw_branch_entry *entry;
@@ -194,7 +189,8 @@ void trace_hw_branch(u64 from, u64 to)
 	entry->ent.type = TRACE_HW_BRANCHES;
 	entry->from = from;
 	entry->to   = to;
-	trace_buffer_unlock_commit(tr, event, 0, 0);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		trace_buffer_unlock_commit(tr, event, 0, 0);
 
  out:
 	atomic_dec(&tr->data[cpu]->disabled);
@@ -224,11 +220,11 @@ static void trace_bts_at(const struct bts_trace *trace, void *at)
 /*
  * Collect the trace on the current cpu and write it into the ftrace buffer.
  *
- * pre: bts_tracer_lock must be locked
+ * pre: tracing must be suspended on the current cpu
  */
 static void trace_bts_cpu(void *arg)
 {
-	struct trace_array *tr = (struct trace_array *) arg;
+	struct trace_array *tr = (struct trace_array *)arg;
 	const struct bts_trace *trace;
 	unsigned char *at;
 
@@ -241,10 +237,9 @@ static void trace_bts_cpu(void *arg)
 	if (unlikely(!this_tracer))
 		return;
 
-	ds_suspend_bts(this_tracer);
 	trace = ds_read_bts(this_tracer);
 	if (!trace)
-		goto out;
+		return;
 
 	for (at = trace->ds.top; (void *)at < trace->ds.end;
 	     at += trace->ds.size)
@@ -253,18 +248,27 @@ static void trace_bts_cpu(void *arg)
 	for (at = trace->ds.begin; (void *)at < trace->ds.top;
 	     at += trace->ds.size)
 		trace_bts_at(trace, at);
-
-out:
-	ds_resume_bts(this_tracer);
 }
 
 static void trace_bts_prepare(struct trace_iterator *iter)
 {
-	spin_lock(&bts_tracer_lock);
+	int cpu;
 
+	get_online_cpus();
+	for_each_online_cpu(cpu)
+		if (likely(per_cpu(tracer, cpu)))
+			ds_suspend_bts(per_cpu(tracer, cpu));
+	/*
+	 * We need to collect the trace on the respective cpu since ftrace
+	 * implicitly adds the record for the current cpu.
+	 * Once that is more flexible, we could collect the data from any cpu.
+	 */
 	on_each_cpu(trace_bts_cpu, iter->tr, 1);
 
-	spin_unlock(&bts_tracer_lock);
+	for_each_online_cpu(cpu)
+		if (likely(per_cpu(tracer, cpu)))
+			ds_resume_bts(per_cpu(tracer, cpu));
+	put_online_cpus();
 }
 
 static void trace_bts_close(struct trace_iterator *iter)
@@ -274,11 +278,11 @@ static void trace_bts_close(struct trace_iterator *iter)
 
 void trace_hw_branch_oops(void)
 {
-	spin_lock(&bts_tracer_lock);
-
-	trace_bts_cpu(hw_branch_trace);
-
-	spin_unlock(&bts_tracer_lock);
+	if (this_tracer) {
+		ds_suspend_bts_noirq(this_tracer);
+		trace_bts_cpu(hw_branch_trace);
+		ds_resume_bts_noirq(this_tracer);
+	}
 }
 
 struct tracer bts_tracer __read_mostly =
@@ -291,7 +295,10 @@ struct tracer bts_tracer __read_mostly =
 	.start		= bts_trace_start,
 	.stop		= bts_trace_stop,
 	.open		= trace_bts_prepare,
-	.close		= trace_bts_close
+	.close		= trace_bts_close,
+#ifdef CONFIG_FTRACE_SELFTEST
+	.selftest	= trace_selftest_startup_hw_branches,
+#endif /* CONFIG_FTRACE_SELFTEST */
 };
 
 __init static int init_bts_trace(void)
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index 8e37fcddd8b..d53b45ed080 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -9,6 +9,8 @@
 #include <linux/kernel.h>
 #include <linux/mmiotrace.h>
 #include <linux/pci.h>
+#include <linux/time.h>
+
 #include <asm/atomic.h>
 
 #include "trace.h"
@@ -174,7 +176,7 @@ static enum print_line_t mmio_print_rw(struct trace_iterator *iter)
 	struct mmiotrace_rw *rw;
 	struct trace_seq *s	= &iter->seq;
 	unsigned long long t	= ns2usecs(iter->ts);
-	unsigned long usec_rem	= do_div(t, 1000000ULL);
+	unsigned long usec_rem	= do_div(t, USEC_PER_SEC);
 	unsigned secs		= (unsigned long)t;
 	int ret = 1;
 
@@ -221,7 +223,7 @@ static enum print_line_t mmio_print_map(struct trace_iterator *iter)
 	struct mmiotrace_map *m;
 	struct trace_seq *s	= &iter->seq;
 	unsigned long long t	= ns2usecs(iter->ts);
-	unsigned long usec_rem	= do_div(t, 1000000ULL);
+	unsigned long usec_rem	= do_div(t, USEC_PER_SEC);
 	unsigned secs		= (unsigned long)t;
 	int ret;
 
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 64b54a59c55..7938f3ae93e 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -14,11 +14,25 @@
 /* must be a power of 2 */
 #define EVENT_HASHSIZE	128
 
-static DEFINE_MUTEX(trace_event_mutex);
+DECLARE_RWSEM(trace_event_mutex);
+
+DEFINE_PER_CPU(struct trace_seq, ftrace_event_seq);
+EXPORT_PER_CPU_SYMBOL(ftrace_event_seq);
+
 static struct hlist_head event_hash[EVENT_HASHSIZE] __read_mostly;
 
 static int next_event_type = __TRACE_LAST_TYPE + 1;
 
+void trace_print_seq(struct seq_file *m, struct trace_seq *s)
+{
+	int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
+
+	s->buffer[len] = 0;
+	seq_puts(m, s->buffer);
+
+	trace_seq_init(s);
+}
+
 enum print_line_t trace_print_bprintk_msg_only(struct trace_iterator *iter)
 {
 	struct trace_seq *s = &iter->seq;
@@ -84,6 +98,39 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
 
 	return len;
 }
+EXPORT_SYMBOL_GPL(trace_seq_printf);
+
+/**
+ * trace_seq_vprintf - sequence printing of trace information
+ * @s: trace sequence descriptor
+ * @fmt: printf format string
+ *
+ * The tracer may use either sequence operations or its own
+ * copy to user routines. To simplify formating of a trace
+ * trace_seq_printf is used to store strings into a special
+ * buffer (@s). Then the output may be either used by
+ * the sequencer or pulled into another buffer.
+ */
+int
+trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args)
+{
+	int len = (PAGE_SIZE - 1) - s->len;
+	int ret;
+
+	if (!len)
+		return 0;
+
+	ret = vsnprintf(s->buffer + s->len, len, fmt, args);
+
+	/* If we can't write it all, don't bother writing anything */
+	if (ret >= len)
+		return 0;
+
+	s->len += ret;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(trace_seq_vprintf);
 
 int trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
 {
@@ -201,6 +248,67 @@ int trace_seq_path(struct trace_seq *s, struct path *path)
 	return 0;
 }
 
+const char *
+ftrace_print_flags_seq(struct trace_seq *p, const char *delim,
+		       unsigned long flags,
+		       const struct trace_print_flags *flag_array)
+{
+	unsigned long mask;
+	const char *str;
+	const char *ret = p->buffer + p->len;
+	int i;
+
+	for (i = 0;  flag_array[i].name && flags; i++) {
+
+		mask = flag_array[i].mask;
+		if ((flags & mask) != mask)
+			continue;
+
+		str = flag_array[i].name;
+		flags &= ~mask;
+		if (p->len && delim)
+			trace_seq_puts(p, delim);
+		trace_seq_puts(p, str);
+	}
+
+	/* check for left over flags */
+	if (flags) {
+		if (p->len && delim)
+			trace_seq_puts(p, delim);
+		trace_seq_printf(p, "0x%lx", flags);
+	}
+
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+EXPORT_SYMBOL(ftrace_print_flags_seq);
+
+const char *
+ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val,
+			 const struct trace_print_flags *symbol_array)
+{
+	int i;
+	const char *ret = p->buffer + p->len;
+
+	for (i = 0;  symbol_array[i].name; i++) {
+
+		if (val != symbol_array[i].mask)
+			continue;
+
+		trace_seq_puts(p, symbol_array[i].name);
+		break;
+	}
+
+	if (!p->len)
+		trace_seq_printf(p, "0x%lx", val);
+		
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+EXPORT_SYMBOL(ftrace_print_symbols_seq);
+
 #ifdef CONFIG_KRETPROBES
 static inline const char *kretprobed(const char *name)
 {
@@ -311,17 +419,20 @@ seq_print_userip_objs(const struct userstack_entry *entry, struct trace_seq *s,
 
 		if (ip == ULONG_MAX || !ret)
 			break;
-		if (i && ret)
-			ret = trace_seq_puts(s, " <- ");
+		if (ret)
+			ret = trace_seq_puts(s, " => ");
 		if (!ip) {
 			if (ret)
 				ret = trace_seq_puts(s, "??");
+			if (ret)
+				ret = trace_seq_puts(s, "\n");
 			continue;
 		}
 		if (!ret)
 			break;
 		if (ret)
 			ret = seq_print_user_ip(s, mm, ip, sym_flags);
+		ret = trace_seq_puts(s, "\n");
 	}
 
 	if (mm)
@@ -455,6 +566,7 @@ static int task_state_char(unsigned long state)
  * @type: the type of event to look for
  *
  * Returns an event of type @type otherwise NULL
+ * Called with trace_event_read_lock() held.
  */
 struct trace_event *ftrace_find_event(int type)
 {
@@ -464,7 +576,7 @@ struct trace_event *ftrace_find_event(int type)
 
 	key = type & (EVENT_HASHSIZE - 1);
 
-	hlist_for_each_entry_rcu(event, n, &event_hash[key], node) {
+	hlist_for_each_entry(event, n, &event_hash[key], node) {
 		if (event->type == type)
 			return event;
 	}
@@ -472,6 +584,46 @@ struct trace_event *ftrace_find_event(int type)
 	return NULL;
 }
 
+static LIST_HEAD(ftrace_event_list);
+
+static int trace_search_list(struct list_head **list)
+{
+	struct trace_event *e;
+	int last = __TRACE_LAST_TYPE;
+
+	if (list_empty(&ftrace_event_list)) {
+		*list = &ftrace_event_list;
+		return last + 1;
+	}
+
+	/*
+	 * We used up all possible max events,
+	 * lets see if somebody freed one.
+	 */
+	list_for_each_entry(e, &ftrace_event_list, list) {
+		if (e->type != last + 1)
+			break;
+		last++;
+	}
+
+	/* Did we used up all 65 thousand events??? */
+	if ((last + 1) > FTRACE_MAX_EVENT)
+		return 0;
+
+	*list = &e->list;
+	return last + 1;
+}
+
+void trace_event_read_lock(void)
+{
+	down_read(&trace_event_mutex);
+}
+
+void trace_event_read_unlock(void)
+{
+	up_read(&trace_event_mutex);
+}
+
 /**
  * register_ftrace_event - register output for an event type
  * @event: the event type to register
@@ -492,22 +644,42 @@ int register_ftrace_event(struct trace_event *event)
 	unsigned key;
 	int ret = 0;
 
-	mutex_lock(&trace_event_mutex);
+	down_write(&trace_event_mutex);
 
-	if (!event) {
-		ret = next_event_type++;
+	if (WARN_ON(!event))
 		goto out;
-	}
 
-	if (!event->type)
-		event->type = next_event_type++;
-	else if (event->type > __TRACE_LAST_TYPE) {
+	INIT_LIST_HEAD(&event->list);
+
+	if (!event->type) {
+		struct list_head *list = NULL;
+
+		if (next_event_type > FTRACE_MAX_EVENT) {
+
+			event->type = trace_search_list(&list);
+			if (!event->type)
+				goto out;
+
+		} else {
+			
+			event->type = next_event_type++;
+			list = &ftrace_event_list;
+		}
+
+		if (WARN_ON(ftrace_find_event(event->type)))
+			goto out;
+
+		list_add_tail(&event->list, list);
+
+	} else if (event->type > __TRACE_LAST_TYPE) {
 		printk(KERN_WARNING "Need to add type to trace.h\n");
 		WARN_ON(1);
-	}
-
-	if (ftrace_find_event(event->type))
 		goto out;
+	} else {
+		/* Is this event already used */
+		if (ftrace_find_event(event->type))
+			goto out;
+	}
 
 	if (event->trace == NULL)
 		event->trace = trace_nop_print;
@@ -520,14 +692,25 @@ int register_ftrace_event(struct trace_event *event)
 
 	key = event->type & (EVENT_HASHSIZE - 1);
 
-	hlist_add_head_rcu(&event->node, &event_hash[key]);
+	hlist_add_head(&event->node, &event_hash[key]);
 
 	ret = event->type;
  out:
-	mutex_unlock(&trace_event_mutex);
+	up_write(&trace_event_mutex);
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(register_ftrace_event);
+
+/*
+ * Used by module code with the trace_event_mutex held for write.
+ */
+int __unregister_ftrace_event(struct trace_event *event)
+{
+	hlist_del(&event->node);
+	list_del(&event->list);
+	return 0;
+}
 
 /**
  * unregister_ftrace_event - remove a no longer used event
@@ -535,12 +718,13 @@ int register_ftrace_event(struct trace_event *event)
  */
 int unregister_ftrace_event(struct trace_event *event)
 {
-	mutex_lock(&trace_event_mutex);
-	hlist_del(&event->node);
-	mutex_unlock(&trace_event_mutex);
+	down_write(&trace_event_mutex);
+	__unregister_ftrace_event(event);
+	up_write(&trace_event_mutex);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(unregister_ftrace_event);
 
 /*
  * Standard events
@@ -833,14 +1017,16 @@ static enum print_line_t trace_stack_print(struct trace_iterator *iter,
 
 	trace_assign_type(field, iter->ent);
 
+	if (!trace_seq_puts(s, "<stack trace>\n"))
+		goto partial;
 	for (i = 0; i < FTRACE_STACK_ENTRIES; i++) {
-		if (i) {
-			if (!trace_seq_puts(s, " <= "))
-				goto partial;
+		if (!field->caller[i] || (field->caller[i] == ULONG_MAX))
+			break;
+		if (!trace_seq_puts(s, " => "))
+			goto partial;
 
-			if (!seq_print_ip_sym(s, field->caller[i], flags))
-				goto partial;
-		}
+		if (!seq_print_ip_sym(s, field->caller[i], flags))
+			goto partial;
 		if (!trace_seq_puts(s, "\n"))
 			goto partial;
 	}
@@ -868,10 +1054,10 @@ static enum print_line_t trace_user_stack_print(struct trace_iterator *iter,
 
 	trace_assign_type(field, iter->ent);
 
-	if (!seq_print_userip_objs(field, s, flags))
+	if (!trace_seq_puts(s, "<user stack trace>\n"))
 		goto partial;
 
-	if (!trace_seq_putc(s, '\n'))
+	if (!seq_print_userip_objs(field, s, flags))
 		goto partial;
 
 	return TRACE_TYPE_HANDLED;
diff --git a/kernel/trace/trace_output.h b/kernel/trace/trace_output.h
index e0bde39c2dd..d38bec4a9c3 100644
--- a/kernel/trace/trace_output.h
+++ b/kernel/trace/trace_output.h
@@ -1,41 +1,17 @@
 #ifndef __TRACE_EVENTS_H
 #define __TRACE_EVENTS_H
 
+#include <linux/trace_seq.h>
 #include "trace.h"
 
-typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
-					      int flags);
-
-struct trace_event {
-	struct hlist_node	node;
-	int			type;
-	trace_print_func	trace;
-	trace_print_func	raw;
-	trace_print_func	hex;
-	trace_print_func	binary;
-};
-
 extern enum print_line_t
 trace_print_bprintk_msg_only(struct trace_iterator *iter);
 extern enum print_line_t
 trace_print_printk_msg_only(struct trace_iterator *iter);
 
-extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
-	__attribute__ ((format (printf, 2, 3)));
-extern int
-trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
 extern int
 seq_print_ip_sym(struct trace_seq *s, unsigned long ip,
 		unsigned long sym_flags);
-extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
-				 size_t cnt);
-extern int trace_seq_puts(struct trace_seq *s, const char *str);
-extern int trace_seq_putc(struct trace_seq *s, unsigned char c);
-extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len);
-extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
-				size_t len);
-extern void *trace_seq_reserve(struct trace_seq *s, size_t len);
-extern int trace_seq_path(struct trace_seq *s, struct path *path);
 extern int seq_print_userip_objs(const struct userstack_entry *entry,
 				 struct trace_seq *s, unsigned long sym_flags);
 extern int seq_print_user_ip(struct trace_seq *s, struct mm_struct *mm,
@@ -44,13 +20,17 @@ extern int seq_print_user_ip(struct trace_seq *s, struct mm_struct *mm,
 extern int trace_print_context(struct trace_iterator *iter);
 extern int trace_print_lat_context(struct trace_iterator *iter);
 
+extern void trace_event_read_lock(void);
+extern void trace_event_read_unlock(void);
 extern struct trace_event *ftrace_find_event(int type);
-extern int register_ftrace_event(struct trace_event *event);
-extern int unregister_ftrace_event(struct trace_event *event);
 
 extern enum print_line_t trace_nop_print(struct trace_iterator *iter,
 					 int flags);
 
+/* used by module unregistering */
+extern int __unregister_ftrace_event(struct trace_event *event);
+extern struct rw_semaphore trace_event_mutex;
+
 #define MAX_MEMHEX_BYTES	8
 #define HEX_CHARS		(MAX_MEMHEX_BYTES*2 + 1)
 
diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
index 118439709fb..8a30d9874cd 100644
--- a/kernel/trace/trace_power.c
+++ b/kernel/trace/trace_power.c
@@ -36,6 +36,7 @@ static void probe_power_start(struct power_trace *it, unsigned int type,
 
 static void probe_power_end(struct power_trace *it)
 {
+	struct ftrace_event_call *call = &event_power;
 	struct ring_buffer_event *event;
 	struct trace_power *entry;
 	struct trace_array_cpu *data;
@@ -54,7 +55,8 @@ static void probe_power_end(struct power_trace *it)
 		goto out;
 	entry	= ring_buffer_event_data(event);
 	entry->state_data = *it;
-	trace_buffer_unlock_commit(tr, event, 0, 0);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		trace_buffer_unlock_commit(tr, event, 0, 0);
  out:
 	preempt_enable();
 }
@@ -62,6 +64,7 @@ static void probe_power_end(struct power_trace *it)
 static void probe_power_mark(struct power_trace *it, unsigned int type,
 				unsigned int level)
 {
+	struct ftrace_event_call *call = &event_power;
 	struct ring_buffer_event *event;
 	struct trace_power *entry;
 	struct trace_array_cpu *data;
@@ -84,7 +87,8 @@ static void probe_power_mark(struct power_trace *it, unsigned int type,
 		goto out;
 	entry	= ring_buffer_event_data(event);
 	entry->state_data = *it;
-	trace_buffer_unlock_commit(tr, event, 0, 0);
+	if (!filter_check_discard(call, entry, tr->buffer, event))
+		trace_buffer_unlock_commit(tr, event, 0, 0);
  out:
 	preempt_enable();
 }
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index eb81556107f..9bece9687b6 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -245,17 +245,13 @@ static const struct file_operations ftrace_formats_fops = {
 static __init int init_trace_printk_function_export(void)
 {
 	struct dentry *d_tracer;
-	struct dentry *entry;
 
 	d_tracer = tracing_init_dentry();
 	if (!d_tracer)
 		return 0;
 
-	entry = debugfs_create_file("printk_formats", 0444, d_tracer,
+	trace_create_file("printk_formats", 0444, d_tracer,
 				    NULL, &ftrace_formats_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs "
-			   "'printk_formats' entry\n");
 
 	return 0;
 }
diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c
index 9117cea6f1a..a98106dd979 100644
--- a/kernel/trace/trace_sched_switch.c
+++ b/kernel/trace/trace_sched_switch.c
@@ -10,7 +10,7 @@
 #include <linux/kallsyms.h>
 #include <linux/uaccess.h>
 #include <linux/ftrace.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
 
 #include "trace.h"
 
@@ -29,13 +29,13 @@ probe_sched_switch(struct rq *__rq, struct task_struct *prev,
 	int cpu;
 	int pc;
 
-	if (!sched_ref || sched_stopped)
+	if (unlikely(!sched_ref))
 		return;
 
 	tracing_record_cmdline(prev);
 	tracing_record_cmdline(next);
 
-	if (!tracer_enabled)
+	if (!tracer_enabled || sched_stopped)
 		return;
 
 	pc = preempt_count();
@@ -56,15 +56,15 @@ probe_sched_wakeup(struct rq *__rq, struct task_struct *wakee, int success)
 	unsigned long flags;
 	int cpu, pc;
 
-	if (!likely(tracer_enabled))
+	if (unlikely(!sched_ref))
 		return;
 
-	pc = preempt_count();
 	tracing_record_cmdline(current);
 
-	if (sched_stopped)
+	if (!tracer_enabled || sched_stopped)
 		return;
 
+	pc = preempt_count();
 	local_irq_save(flags);
 	cpu = raw_smp_processor_id();
 	data = ctx_trace->data[cpu];
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 5bc00e8f153..eacb2722517 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -15,7 +15,7 @@
 #include <linux/kallsyms.h>
 #include <linux/uaccess.h>
 #include <linux/ftrace.h>
-#include <trace/sched.h>
+#include <trace/events/sched.h>
 
 #include "trace.h"
 
@@ -138,9 +138,6 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 
 	pc = preempt_count();
 
-	/* The task we are waiting for is waking up */
-	data = wakeup_trace->data[wakeup_cpu];
-
 	/* disable local data, not wakeup_cpu data */
 	cpu = raw_smp_processor_id();
 	disabled = atomic_inc_return(&wakeup_trace->data[cpu]->disabled);
@@ -154,6 +151,9 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 	if (unlikely(!tracer_enabled || next != wakeup_task))
 		goto out_unlock;
 
+	/* The task we are waiting for is waking up */
+	data = wakeup_trace->data[wakeup_cpu];
+
 	trace_function(wakeup_trace, CALLER_ADDR0, CALLER_ADDR1, flags, pc);
 	tracing_sched_switch_trace(wakeup_trace, prev, next, flags, pc);
 
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 08f4eb2763d..00dd6485bdd 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -16,6 +16,7 @@ static inline int trace_valid_entry(struct trace_entry *entry)
 	case TRACE_BRANCH:
 	case TRACE_GRAPH_ENT:
 	case TRACE_GRAPH_RET:
+	case TRACE_HW_BRANCHES:
 		return 1;
 	}
 	return 0;
@@ -188,6 +189,7 @@ int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
 #else
 # define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; })
 #endif /* CONFIG_DYNAMIC_FTRACE */
+
 /*
  * Simple verification test of ftrace function tracer.
  * Enable ftrace, sleep 1/10 second, and then read the trace
@@ -749,3 +751,59 @@ trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr)
 	return ret;
 }
 #endif /* CONFIG_BRANCH_TRACER */
+
+#ifdef CONFIG_HW_BRANCH_TRACER
+int
+trace_selftest_startup_hw_branches(struct tracer *trace,
+				   struct trace_array *tr)
+{
+	struct trace_iterator *iter;
+	struct tracer tracer;
+	unsigned long count;
+	int ret;
+
+	if (!trace->open) {
+		printk(KERN_CONT "missing open function...");
+		return -1;
+	}
+
+	ret = tracer_init(trace, tr);
+	if (ret) {
+		warn_failed_init_tracer(trace, ret);
+		return ret;
+	}
+
+	/*
+	 * The hw-branch tracer needs to collect the trace from the various
+	 * cpu trace buffers - before tracing is stopped.
+	 */
+	iter = kzalloc(sizeof(*iter), GFP_KERNEL);
+	if (!iter)
+		return -ENOMEM;
+
+	memcpy(&tracer, trace, sizeof(tracer));
+
+	iter->trace = &tracer;
+	iter->tr = tr;
+	iter->pos = -1;
+	mutex_init(&iter->mutex);
+
+	trace->open(iter);
+
+	mutex_destroy(&iter->mutex);
+	kfree(iter);
+
+	tracing_stop();
+
+	ret = trace_test_buffer(tr, &count);
+	trace->reset(tr);
+	tracing_start();
+
+	if (!ret && !count) {
+		printk(KERN_CONT "no entries found..");
+		ret = -1;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_HW_BRANCH_TRACER */
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index c750f65f966..2d7aebd71db 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -265,7 +265,7 @@ static int t_show(struct seq_file *m, void *v)
 		seq_printf(m, "        Depth    Size   Location"
 			   "    (%d entries)\n"
 			   "        -----    ----   --------\n",
-			   max_stack_trace.nr_entries);
+			   max_stack_trace.nr_entries - 1);
 
 		if (!stack_tracer_enabled && !max_stack_size)
 			print_disabled(m);
@@ -352,19 +352,14 @@ __setup("stacktrace", enable_stacktrace);
 static __init int stack_trace_init(void)
 {
 	struct dentry *d_tracer;
-	struct dentry *entry;
 
 	d_tracer = tracing_init_dentry();
 
-	entry = debugfs_create_file("stack_max_size", 0644, d_tracer,
-				    &max_stack_size, &stack_max_size_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'stack_max_size' entry\n");
+	trace_create_file("stack_max_size", 0644, d_tracer,
+			&max_stack_size, &stack_max_size_fops);
 
-	entry = debugfs_create_file("stack_trace", 0444, d_tracer,
-				    NULL, &stack_trace_fops);
-	if (!entry)
-		pr_warning("Could not create debugfs 'stack_trace' entry\n");
+	trace_create_file("stack_trace", 0444, d_tracer,
+			NULL, &stack_trace_fops);
 
 	if (stack_tracer_enabled)
 		register_ftrace_function(&trace_ops);
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index acdebd771a9..c00643733f4 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -1,7 +1,7 @@
 /*
  * Infrastructure for statistic tracing (histogram output).
  *
- * Copyright (C) 2008 Frederic Weisbecker <fweisbec@gmail.com>
+ * Copyright (C) 2008-2009 Frederic Weisbecker <fweisbec@gmail.com>
  *
  * Based on the code from trace_branch.c which is
  * Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com>
@@ -10,22 +10,27 @@
 
 
 #include <linux/list.h>
+#include <linux/rbtree.h>
 #include <linux/debugfs.h>
 #include "trace_stat.h"
 #include "trace.h"
 
 
-/* List of stat entries from a tracer */
-struct trace_stat_list {
-	struct list_head	list;
+/*
+ * List of stat red-black nodes from a tracer
+ * We use a such tree to sort quickly the stat
+ * entries from the tracer.
+ */
+struct stat_node {
+	struct rb_node		node;
 	void			*stat;
 };
 
 /* A stat session is the stats output in one file */
-struct tracer_stat_session {
+struct stat_session {
 	struct list_head	session_list;
 	struct tracer_stat	*ts;
-	struct list_head	stat_list;
+	struct rb_root		stat_root;
 	struct mutex		stat_mutex;
 	struct dentry		*file;
 };
@@ -37,18 +42,48 @@ static DEFINE_MUTEX(all_stat_sessions_mutex);
 /* The root directory for all stat files */
 static struct dentry		*stat_dir;
 
+/*
+ * Iterate through the rbtree using a post order traversal path
+ * to release the next node.
+ * It won't necessary release one at each iteration
+ * but it will at least advance closer to the next one
+ * to be released.
+ */
+static struct rb_node *release_next(struct rb_node *node)
+{
+	struct stat_node *snode;
+	struct rb_node *parent = rb_parent(node);
+
+	if (node->rb_left)
+		return node->rb_left;
+	else if (node->rb_right)
+		return node->rb_right;
+	else {
+		if (!parent)
+			;
+		else if (parent->rb_left == node)
+			parent->rb_left = NULL;
+		else
+			parent->rb_right = NULL;
+
+		snode = container_of(node, struct stat_node, node);
+		kfree(snode);
+
+		return parent;
+	}
+}
 
-static void reset_stat_session(struct tracer_stat_session *session)
+static void reset_stat_session(struct stat_session *session)
 {
-	struct trace_stat_list *node, *next;
+	struct rb_node *node = session->stat_root.rb_node;
 
-	list_for_each_entry_safe(node, next, &session->stat_list, list)
-		kfree(node);
+	while (node)
+		node = release_next(node);
 
-	INIT_LIST_HEAD(&session->stat_list);
+	session->stat_root = RB_ROOT;
 }
 
-static void destroy_session(struct tracer_stat_session *session)
+static void destroy_session(struct stat_session *session)
 {
 	debugfs_remove(session->file);
 	reset_stat_session(session);
@@ -56,25 +91,60 @@ static void destroy_session(struct tracer_stat_session *session)
 	kfree(session);
 }
 
+typedef int (*cmp_stat_t)(void *, void *);
+
+static int insert_stat(struct rb_root *root, void *stat, cmp_stat_t cmp)
+{
+	struct rb_node **new = &(root->rb_node), *parent = NULL;
+	struct stat_node *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	data->stat = stat;
+
+	/*
+	 * Figure out where to put new node
+	 * This is a descendent sorting
+	 */
+	while (*new) {
+		struct stat_node *this;
+		int result;
+
+		this = container_of(*new, struct stat_node, node);
+		result = cmp(data->stat, this->stat);
+
+		parent = *new;
+		if (result >= 0)
+			new = &((*new)->rb_left);
+		else
+			new = &((*new)->rb_right);
+	}
+
+	rb_link_node(&data->node, parent, new);
+	rb_insert_color(&data->node, root);
+	return 0;
+}
+
 /*
  * For tracers that don't provide a stat_cmp callback.
- * This one will force an immediate insertion on tail of
- * the list.
+ * This one will force an insertion as right-most node
+ * in the rbtree.
  */
 static int dummy_cmp(void *p1, void *p2)
 {
-	return 1;
+	return -1;
 }
 
 /*
- * Initialize the stat list at each trace_stat file opening.
+ * Initialize the stat rbtree at each trace_stat file opening.
  * All of these copies and sorting are required on all opening
  * since the stats could have changed between two file sessions.
  */
-static int stat_seq_init(struct tracer_stat_session *session)
+static int stat_seq_init(struct stat_session *session)
 {
-	struct trace_stat_list *iter_entry, *new_entry;
 	struct tracer_stat *ts = session->ts;
+	struct rb_root *root = &session->stat_root;
 	void *stat;
 	int ret = 0;
 	int i;
@@ -85,29 +155,16 @@ static int stat_seq_init(struct tracer_stat_session *session)
 	if (!ts->stat_cmp)
 		ts->stat_cmp = dummy_cmp;
 
-	stat = ts->stat_start();
+	stat = ts->stat_start(ts);
 	if (!stat)
 		goto exit;
 
-	/*
-	 * The first entry. Actually this is the second, but the first
-	 * one (the stat_list head) is pointless.
-	 */
-	new_entry = kmalloc(sizeof(struct trace_stat_list), GFP_KERNEL);
-	if (!new_entry) {
-		ret = -ENOMEM;
+	ret = insert_stat(root, stat, ts->stat_cmp);
+	if (ret)
 		goto exit;
-	}
-
-	INIT_LIST_HEAD(&new_entry->list);
-
-	list_add(&new_entry->list, &session->stat_list);
-
-	new_entry->stat = stat;
 
 	/*
-	 * Iterate over the tracer stat entries and store them in a sorted
-	 * list.
+	 * Iterate over the tracer stat entries and store them in an rbtree.
 	 */
 	for (i = 1; ; i++) {
 		stat = ts->stat_next(stat, i);
@@ -116,36 +173,16 @@ static int stat_seq_init(struct tracer_stat_session *session)
 		if (!stat)
 			break;
 
-		new_entry = kmalloc(sizeof(struct trace_stat_list), GFP_KERNEL);
-		if (!new_entry) {
-			ret = -ENOMEM;
-			goto exit_free_list;
-		}
-
-		INIT_LIST_HEAD(&new_entry->list);
-		new_entry->stat = stat;
-
-		list_for_each_entry_reverse(iter_entry, &session->stat_list,
-				list) {
-
-			/* Insertion with a descendent sorting */
-			if (ts->stat_cmp(iter_entry->stat,
-					new_entry->stat) >= 0) {
-
-				list_add(&new_entry->list, &iter_entry->list);
-				break;
-			}
-		}
-
-		/* The current larger value */
-		if (list_empty(&new_entry->list))
-			list_add(&new_entry->list, &session->stat_list);
+		ret = insert_stat(root, stat, ts->stat_cmp);
+		if (ret)
+			goto exit_free_rbtree;
 	}
+
 exit:
 	mutex_unlock(&session->stat_mutex);
 	return ret;
 
-exit_free_list:
+exit_free_rbtree:
 	reset_stat_session(session);
 	mutex_unlock(&session->stat_mutex);
 	return ret;
@@ -154,38 +191,51 @@ exit_free_list:
 
 static void *stat_seq_start(struct seq_file *s, loff_t *pos)
 {
-	struct tracer_stat_session *session = s->private;
+	struct stat_session *session = s->private;
+	struct rb_node *node;
+	int i;
 
-	/* Prevent from tracer switch or stat_list modification */
+	/* Prevent from tracer switch or rbtree modification */
 	mutex_lock(&session->stat_mutex);
 
 	/* If we are in the beginning of the file, print the headers */
-	if (!*pos && session->ts->stat_headers)
+	if (!*pos && session->ts->stat_headers) {
+		(*pos)++;
 		return SEQ_START_TOKEN;
+	}
 
-	return seq_list_start(&session->stat_list, *pos);
+	node = rb_first(&session->stat_root);
+	for (i = 0; node && i < *pos; i++)
+		node = rb_next(node);
+
+	(*pos)++;
+
+	return node;
 }
 
 static void *stat_seq_next(struct seq_file *s, void *p, loff_t *pos)
 {
-	struct tracer_stat_session *session = s->private;
+	struct stat_session *session = s->private;
+	struct rb_node *node = p;
+
+	(*pos)++;
 
 	if (p == SEQ_START_TOKEN)
-		return seq_list_start(&session->stat_list, *pos);
+		return rb_first(&session->stat_root);
 
-	return seq_list_next(p, &session->stat_list, pos);
+	return rb_next(node);
 }
 
 static void stat_seq_stop(struct seq_file *s, void *p)
 {
-	struct tracer_stat_session *session = s->private;
+	struct stat_session *session = s->private;
 	mutex_unlock(&session->stat_mutex);
 }
 
 static int stat_seq_show(struct seq_file *s, void *v)
 {
-	struct tracer_stat_session *session = s->private;
-	struct trace_stat_list *l = list_entry(v, struct trace_stat_list, list);
+	struct stat_session *session = s->private;
+	struct stat_node *l = container_of(v, struct stat_node, node);
 
 	if (v == SEQ_START_TOKEN)
 		return session->ts->stat_headers(s);
@@ -205,7 +255,7 @@ static int tracing_stat_open(struct inode *inode, struct file *file)
 {
 	int ret;
 
-	struct tracer_stat_session *session = inode->i_private;
+	struct stat_session *session = inode->i_private;
 
 	ret = seq_open(file, &trace_stat_seq_ops);
 	if (!ret) {
@@ -218,11 +268,11 @@ static int tracing_stat_open(struct inode *inode, struct file *file)
 }
 
 /*
- * Avoid consuming memory with our now useless list.
+ * Avoid consuming memory with our now useless rbtree.
  */
 static int tracing_stat_release(struct inode *i, struct file *f)
 {
-	struct tracer_stat_session *session = i->i_private;
+	struct stat_session *session = i->i_private;
 
 	mutex_lock(&session->stat_mutex);
 	reset_stat_session(session);
@@ -251,7 +301,7 @@ static int tracing_stat_init(void)
 	return 0;
 }
 
-static int init_stat_file(struct tracer_stat_session *session)
+static int init_stat_file(struct stat_session *session)
 {
 	if (!stat_dir && tracing_stat_init())
 		return -ENODEV;
@@ -266,7 +316,7 @@ static int init_stat_file(struct tracer_stat_session *session)
 
 int register_stat_tracer(struct tracer_stat *trace)
 {
-	struct tracer_stat_session *session, *node, *tmp;
+	struct stat_session *session, *node;
 	int ret;
 
 	if (!trace)
@@ -277,7 +327,7 @@ int register_stat_tracer(struct tracer_stat *trace)
 
 	/* Already registered? */
 	mutex_lock(&all_stat_sessions_mutex);
-	list_for_each_entry_safe(node, tmp, &all_stat_sessions, session_list) {
+	list_for_each_entry(node, &all_stat_sessions, session_list) {
 		if (node->ts == trace) {
 			mutex_unlock(&all_stat_sessions_mutex);
 			return -EINVAL;
@@ -286,15 +336,13 @@ int register_stat_tracer(struct tracer_stat *trace)
 	mutex_unlock(&all_stat_sessions_mutex);
 
 	/* Init the session */
-	session = kmalloc(sizeof(struct tracer_stat_session), GFP_KERNEL);
+	session = kzalloc(sizeof(*session), GFP_KERNEL);
 	if (!session)
 		return -ENOMEM;
 
 	session->ts = trace;
 	INIT_LIST_HEAD(&session->session_list);
-	INIT_LIST_HEAD(&session->stat_list);
 	mutex_init(&session->stat_mutex);
-	session->file = NULL;
 
 	ret = init_stat_file(session);
 	if (ret) {
@@ -312,7 +360,7 @@ int register_stat_tracer(struct tracer_stat *trace)
 
 void unregister_stat_tracer(struct tracer_stat *trace)
 {
-	struct tracer_stat_session *node, *tmp;
+	struct stat_session *node, *tmp;
 
 	mutex_lock(&all_stat_sessions_mutex);
 	list_for_each_entry_safe(node, tmp, &all_stat_sessions, session_list) {
diff --git a/kernel/trace/trace_stat.h b/kernel/trace/trace_stat.h
index 202274cf7f3..f3546a2cd82 100644
--- a/kernel/trace/trace_stat.h
+++ b/kernel/trace/trace_stat.h
@@ -12,7 +12,7 @@ struct tracer_stat {
 	/* The name of your stat file */
 	const char		*name;
 	/* Iteration over statistic entries */
-	void			*(*stat_start)(void);
+	void			*(*stat_start)(struct tracer_stat *trace);
 	void			*(*stat_next)(void *prev, int idx);
 	/* Compare two entries for stats sorting */
 	int			(*stat_cmp)(void *p1, void *p2);
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index 91fd19c2149..e04b76cc238 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -321,11 +321,7 @@ static const struct file_operations sysprof_sample_fops = {
 
 void init_tracer_sysprof_debugfs(struct dentry *d_tracer)
 {
-	struct dentry *entry;
 
-	entry = debugfs_create_file("sysprof_sample_period", 0644,
+	trace_create_file("sysprof_sample_period", 0644,
 			d_tracer, NULL, &sysprof_sample_fops);
-	if (entry)
-		return;
-	pr_warning("Could not create debugfs 'sysprof_sample_period' entry\n");
 }
diff --git a/kernel/trace/trace_workqueue.c b/kernel/trace/trace_workqueue.c
index 797201e4a13..97fcea4acce 100644
--- a/kernel/trace/trace_workqueue.c
+++ b/kernel/trace/trace_workqueue.c
@@ -6,7 +6,7 @@
  */
 
 
-#include <trace/workqueue.h>
+#include <trace/events/workqueue.h>
 #include <linux/list.h>
 #include <linux/percpu.h>
 #include "trace_stat.h"
@@ -16,8 +16,6 @@
 /* A cpu workqueue thread */
 struct cpu_workqueue_stats {
 	struct list_head            list;
-/* Useful to know if we print the cpu headers */
-	bool		            first_entry;
 	int		            cpu;
 	pid_t			    pid;
 /* Can be inserted from interrupt or user context, need to be atomic */
@@ -47,12 +45,11 @@ probe_workqueue_insertion(struct task_struct *wq_thread,
 			  struct work_struct *work)
 {
 	int cpu = cpumask_first(&wq_thread->cpus_allowed);
-	struct cpu_workqueue_stats *node, *next;
+	struct cpu_workqueue_stats *node;
 	unsigned long flags;
 
 	spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
-	list_for_each_entry_safe(node, next, &workqueue_cpu_stat(cpu)->list,
-							list) {
+	list_for_each_entry(node, &workqueue_cpu_stat(cpu)->list, list) {
 		if (node->pid == wq_thread->pid) {
 			atomic_inc(&node->inserted);
 			goto found;
@@ -69,12 +66,11 @@ probe_workqueue_execution(struct task_struct *wq_thread,
 			  struct work_struct *work)
 {
 	int cpu = cpumask_first(&wq_thread->cpus_allowed);
-	struct cpu_workqueue_stats *node, *next;
+	struct cpu_workqueue_stats *node;
 	unsigned long flags;
 
 	spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
-	list_for_each_entry_safe(node, next, &workqueue_cpu_stat(cpu)->list,
-							list) {
+	list_for_each_entry(node, &workqueue_cpu_stat(cpu)->list, list) {
 		if (node->pid == wq_thread->pid) {
 			node->executed++;
 			goto found;
@@ -105,8 +101,6 @@ static void probe_workqueue_creation(struct task_struct *wq_thread, int cpu)
 	cws->pid = wq_thread->pid;
 
 	spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
-	if (list_empty(&workqueue_cpu_stat(cpu)->list))
-		cws->first_entry = true;
 	list_add_tail(&cws->list, &workqueue_cpu_stat(cpu)->list);
 	spin_unlock_irqrestore(&workqueue_cpu_stat(cpu)->lock, flags);
 }
@@ -152,7 +146,7 @@ static struct cpu_workqueue_stats *workqueue_stat_start_cpu(int cpu)
 	return ret;
 }
 
-static void *workqueue_stat_start(void)
+static void *workqueue_stat_start(struct tracer_stat *trace)
 {
 	int cpu;
 	void *ret = NULL;
@@ -191,16 +185,9 @@ static void *workqueue_stat_next(void *prev, int idx)
 static int workqueue_stat_show(struct seq_file *s, void *p)
 {
 	struct cpu_workqueue_stats *cws = p;
-	unsigned long flags;
-	int cpu = cws->cpu;
 	struct pid *pid;
 	struct task_struct *tsk;
 
-	spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
-	if (&cws->list == workqueue_cpu_stat(cpu)->list.next)
-		seq_printf(s, "\n");
-	spin_unlock_irqrestore(&workqueue_cpu_stat(cpu)->lock, flags);
-
 	pid = find_get_pid(cws->pid);
 	if (pid) {
 		tsk = get_pid_task(pid, PIDTYPE_PID);
diff --git a/kernel/wait.c b/kernel/wait.c
index 42a2dbc181c..ea7c3b4275c 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -154,7 +154,7 @@ void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
 	if (!list_empty(&wait->task_list))
 		list_del_init(&wait->task_list);
 	else if (waitqueue_active(q))
-		__wake_up_common(q, mode, 1, 0, key);
+		__wake_up_locked_key(q, mode, key);
 	spin_unlock_irqrestore(&q->lock, flags);
 }
 EXPORT_SYMBOL(abort_exclusive_wait);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index f71fb2a0895..0668795d881 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -33,7 +33,8 @@
 #include <linux/kallsyms.h>
 #include <linux/debug_locks.h>
 #include <linux/lockdep.h>
-#include <trace/workqueue.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/workqueue.h>
 
 /*
  * The per-CPU workqueue (if single thread, we always use the first
@@ -124,8 +125,6 @@ struct cpu_workqueue_struct *get_wq_data(struct work_struct *work)
 	return (void *) (atomic_long_read(&work->data) & WORK_STRUCT_WQ_DATA_MASK);
 }
 
-DEFINE_TRACE(workqueue_insertion);
-
 static void insert_work(struct cpu_workqueue_struct *cwq,
 			struct work_struct *work, struct list_head *head)
 {
@@ -262,8 +261,6 @@ int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
 }
 EXPORT_SYMBOL_GPL(queue_delayed_work_on);
 
-DEFINE_TRACE(workqueue_execution);
-
 static void run_workqueue(struct cpu_workqueue_struct *cwq)
 {
 	spin_lock_irq(&cwq->lock);
@@ -753,8 +750,6 @@ init_cpu_workqueue(struct workqueue_struct *wq, int cpu)
 	return cwq;
 }
 
-DEFINE_TRACE(workqueue_creation);
-
 static int create_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu)
 {
 	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
@@ -860,8 +855,6 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 }
 EXPORT_SYMBOL_GPL(__create_workqueue_key);
 
-DEFINE_TRACE(workqueue_destruction);
-
 static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
 {
 	/*
diff --git a/lib/Kconfig b/lib/Kconfig
index 8ade0a7a91e..9960be04cbb 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -10,6 +10,9 @@ menu "Library routines"
 config BITREVERSE
 	tristate
 
+config RATIONAL
+	boolean
+
 config GENERIC_FIND_FIRST_BIT
 	bool
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 6cdcf38f2da..116a35051be 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -336,6 +336,38 @@ config SLUB_STATS
 	  out which slabs are relevant to a particular load.
 	  Try running: slabinfo -DA
 
+config DEBUG_KMEMLEAK
+	bool "Kernel memory leak detector"
+	depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM) && \
+		!MEMORY_HOTPLUG
+	select DEBUG_SLAB if SLAB
+	select SLUB_DEBUG if SLUB
+	select DEBUG_FS if SYSFS
+	select STACKTRACE if STACKTRACE_SUPPORT
+	select KALLSYMS
+	help
+	  Say Y here if you want to enable the memory leak
+	  detector. The memory allocation/freeing is traced in a way
+	  similar to the Boehm's conservative garbage collector, the
+	  difference being that the orphan objects are not freed but
+	  only shown in /sys/kernel/debug/kmemleak. Enabling this
+	  feature will introduce an overhead to memory
+	  allocations. See Documentation/kmemleak.txt for more
+	  details.
+
+	  In order to access the kmemleak file, debugfs needs to be
+	  mounted (usually at /sys/kernel/debug).
+
+config DEBUG_KMEMLEAK_TEST
+	tristate "Simple test for the kernel memory leak detector"
+	depends on DEBUG_KMEMLEAK
+	help
+	  Say Y or M here to build a test for the kernel memory leak
+	  detector. This option enables a module that explicitly leaks
+	  memory.
+
+	  If unsure, say N.
+
 config DEBUG_PREEMPT
 	bool "Debug preemptible kernel"
 	depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
diff --git a/lib/Makefile b/lib/Makefile
index 33a40e40e3e..34c5c0e6222 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -50,6 +50,7 @@ ifneq ($(CONFIG_HAVE_DEC_LOCK),y)
 endif
 
 obj-$(CONFIG_BITREVERSE) += bitrev.o
+obj-$(CONFIG_RATIONAL)	+= rational.o
 obj-$(CONFIG_CRC_CCITT)	+= crc-ccitt.o
 obj-$(CONFIG_CRC16)	+= crc16.o
 obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o
@@ -92,6 +93,8 @@ obj-$(CONFIG_NLATTR) += nlattr.o
 
 obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
 
+obj-$(CONFIG_GENERIC_CSUM) += checksum.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/checksum.c b/lib/checksum.c
new file mode 100644
index 00000000000..12e5a1c91cd
--- /dev/null
+++ b/lib/checksum.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Tom May, <ftom@netcom.com>
+ *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ *		Lots of code moved from tcp.c and ip.c; see those files
+ *		for more names.
+ *
+ * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
+ *		Fixed some nasty bugs, causing some horrible crashes.
+ *		A: At some points, the sum (%0) was used as
+ *		length-counter instead of the length counter
+ *		(%1). Thanks to Roman Hodek for pointing this out.
+ *		B: GCC seems to mess up if one uses too many
+ *		data-registers to hold input values and one tries to
+ *		specify d0 and d1 as scratch registers. Letting gcc
+ *		choose these registers itself solves the problem.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
+ kills, so most of the assembly has to go. */
+
+#include <linux/module.h>
+#include <net/checksum.h>
+
+#include <asm/byteorder.h>
+
+static inline unsigned short from32to16(unsigned long x)
+{
+	/* add up 16-bit and 16-bit for 16+c bit */
+	x = (x & 0xffff) + (x >> 16);
+	/* add up carry.. */
+	x = (x & 0xffff) + (x >> 16);
+	return x;
+}
+
+static unsigned int do_csum(const unsigned char *buff, int len)
+{
+	int odd, count;
+	unsigned long result = 0;
+
+	if (len <= 0)
+		goto out;
+	odd = 1 & (unsigned long) buff;
+	if (odd) {
+		result = *buff;
+		len--;
+		buff++;
+	}
+	count = len >> 1;		/* nr of 16-bit words.. */
+	if (count) {
+		if (2 & (unsigned long) buff) {
+			result += *(unsigned short *) buff;
+			count--;
+			len -= 2;
+			buff += 2;
+		}
+		count >>= 1;		/* nr of 32-bit words.. */
+		if (count) {
+			unsigned long carry = 0;
+			do {
+				unsigned long w = *(unsigned long *) buff;
+				count--;
+				buff += 4;
+				result += carry;
+				result += w;
+				carry = (w > result);
+			} while (count);
+			result += carry;
+			result = (result & 0xffff) + (result >> 16);
+		}
+		if (len & 2) {
+			result += *(unsigned short *) buff;
+			buff += 2;
+		}
+	}
+	if (len & 1)
+		result += (*buff << 8);
+	result = from32to16(result);
+	if (odd)
+		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+out:
+	return result;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	return (__force __sum16)~do_csum(iph, ihl*4);
+}
+EXPORT_SYMBOL(ip_fast_csum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum wsum)
+{
+	unsigned int sum = (__force unsigned int)wsum;
+	unsigned int result = do_csum(buff, len);
+
+	/* add in old sum, and carry.. */
+	result += sum;
+	if (sum > result)
+		result += 1;
+	return (__force __wsum)result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+	return (__force __sum16)~do_csum(buff, len);
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+						__wsum sum, int *csum_err)
+{
+	int missing;
+
+	missing = __copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*csum_err = -EFAULT;
+	} else
+		*csum_err = 0;
+
+	return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
+{
+	memcpy(dst, src, len);
+	return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
+
+#ifndef csum_tcpudp_nofold
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+			unsigned short len,
+			unsigned short proto,
+			__wsum sum)
+{
+	unsigned long long s = (__force u32)sum;
+
+	s += (__force u32)saddr;
+	s += (__force u32)daddr;
+#ifdef __BIG_ENDIAN
+	s += proto + len;
+#else
+	s += (proto + len) << 8;
+#endif
+	s += (s >> 32);
+	return (__force __wsum)s;
+}
+EXPORT_SYMBOL(csum_tcpudp_nofold);
+#endif
diff --git a/lib/cpumask.c b/lib/cpumask.c
index 1f71b97de0f..7bb4142a502 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -92,15 +92,8 @@ int cpumask_any_but(const struct cpumask *mask, unsigned int cpu)
  */
 bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
 {
-	if (likely(slab_is_available()))
-		*mask = kmalloc_node(cpumask_size(), flags, node);
-	else {
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-		printk(KERN_ERR
-			"=> alloc_cpumask_var: kmalloc not available!\n");
-#endif
-		*mask = NULL;
-	}
+	*mask = kmalloc_node(cpumask_size(), flags, node);
+
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
 	if (!*mask) {
 		printk(KERN_ERR "=> alloc_cpumask_var: failed!\n");
@@ -119,6 +112,12 @@ bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
 }
 EXPORT_SYMBOL(alloc_cpumask_var_node);
 
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
+{
+	return alloc_cpumask_var_node(mask, flags | __GFP_ZERO, node);
+}
+EXPORT_SYMBOL(zalloc_cpumask_var_node);
+
 /**
  * alloc_cpumask_var - allocate a struct cpumask
  * @mask: pointer to cpumask_var_t where the cpumask is returned
@@ -135,6 +134,12 @@ bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
 }
 EXPORT_SYMBOL(alloc_cpumask_var);
 
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+	return alloc_cpumask_var(mask, flags | __GFP_ZERO);
+}
+EXPORT_SYMBOL(zalloc_cpumask_var);
+
 /**
  * alloc_bootmem_cpumask_var - allocate a struct cpumask from the bootmem arena.
  * @mask: pointer to cpumask_var_t where the cpumask is returned
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 69da09a085a..ad65fc0317d 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -23,9 +23,11 @@
 #include <linux/dma-debug.h>
 #include <linux/spinlock.h>
 #include <linux/debugfs.h>
+#include <linux/uaccess.h>
 #include <linux/device.h>
 #include <linux/types.h>
 #include <linux/sched.h>
+#include <linux/ctype.h>
 #include <linux/list.h>
 #include <linux/slab.h>
 
@@ -85,6 +87,7 @@ static u32 show_num_errors = 1;
 
 static u32 num_free_entries;
 static u32 min_free_entries;
+static u32 nr_total_entries;
 
 /* number of preallocated entries requested by kernel cmdline */
 static u32 req_entries;
@@ -97,6 +100,16 @@ static struct dentry *show_all_errors_dent  __read_mostly;
 static struct dentry *show_num_errors_dent  __read_mostly;
 static struct dentry *num_free_entries_dent __read_mostly;
 static struct dentry *min_free_entries_dent __read_mostly;
+static struct dentry *filter_dent           __read_mostly;
+
+/* per-driver filter related state */
+
+#define NAME_MAX_LEN	64
+
+static char                  current_driver_name[NAME_MAX_LEN] __read_mostly;
+static struct device_driver *current_driver                    __read_mostly;
+
+static DEFINE_RWLOCK(driver_name_lock);
 
 static const char *type2name[4] = { "single", "page",
 				    "scather-gather", "coherent" };
@@ -104,6 +117,11 @@ static const char *type2name[4] = { "single", "page",
 static const char *dir2name[4] = { "DMA_BIDIRECTIONAL", "DMA_TO_DEVICE",
 				   "DMA_FROM_DEVICE", "DMA_NONE" };
 
+/* little merge helper - remove it after the merge window */
+#ifndef BUS_NOTIFY_UNBOUND_DRIVER
+#define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
+#endif
+
 /*
  * The access to some variables in this macro is racy. We can't use atomic_t
  * here because all these variables are exported to debugfs. Some of them even
@@ -121,15 +139,54 @@ static inline void dump_entry_trace(struct dma_debug_entry *entry)
 {
 #ifdef CONFIG_STACKTRACE
 	if (entry) {
-		printk(KERN_WARNING "Mapped at:\n");
+		pr_warning("Mapped at:\n");
 		print_stack_trace(&entry->stacktrace, 0);
 	}
 #endif
 }
 
+static bool driver_filter(struct device *dev)
+{
+	struct device_driver *drv;
+	unsigned long flags;
+	bool ret;
+
+	/* driver filter off */
+	if (likely(!current_driver_name[0]))
+		return true;
+
+	/* driver filter on and initialized */
+	if (current_driver && dev->driver == current_driver)
+		return true;
+
+	if (current_driver || !current_driver_name[0])
+		return false;
+
+	/* driver filter on but not yet initialized */
+	drv = get_driver(dev->driver);
+	if (!drv)
+		return false;
+
+	/* lock to protect against change of current_driver_name */
+	read_lock_irqsave(&driver_name_lock, flags);
+
+	ret = false;
+	if (drv->name &&
+	    strncmp(current_driver_name, drv->name, NAME_MAX_LEN - 1) == 0) {
+		current_driver = drv;
+		ret = true;
+	}
+
+	read_unlock_irqrestore(&driver_name_lock, flags);
+	put_driver(drv);
+
+	return ret;
+}
+
 #define err_printk(dev, entry, format, arg...) do {		\
 		error_count += 1;				\
-		if (show_all_errors || show_num_errors > 0) {	\
+		if (driver_filter(dev) &&			\
+		    (show_all_errors || show_num_errors > 0)) {	\
 			WARN(1, "%s %s: " format,		\
 			     dev_driver_string(dev),		\
 			     dev_name(dev) , ## arg);		\
@@ -185,15 +242,50 @@ static void put_hash_bucket(struct hash_bucket *bucket,
 static struct dma_debug_entry *hash_bucket_find(struct hash_bucket *bucket,
 						struct dma_debug_entry *ref)
 {
-	struct dma_debug_entry *entry;
+	struct dma_debug_entry *entry, *ret = NULL;
+	int matches = 0, match_lvl, last_lvl = 0;
 
 	list_for_each_entry(entry, &bucket->list, list) {
-		if ((entry->dev_addr == ref->dev_addr) &&
-		    (entry->dev == ref->dev))
+		if ((entry->dev_addr != ref->dev_addr) ||
+		    (entry->dev != ref->dev))
+			continue;
+
+		/*
+		 * Some drivers map the same physical address multiple
+		 * times. Without a hardware IOMMU this results in the
+		 * same device addresses being put into the dma-debug
+		 * hash multiple times too. This can result in false
+		 * positives being reported. Therfore we implement a
+		 * best-fit algorithm here which returns the entry from
+		 * the hash which fits best to the reference value
+		 * instead of the first-fit.
+		 */
+		matches += 1;
+		match_lvl = 0;
+		entry->size      == ref->size      ? ++match_lvl : match_lvl;
+		entry->type      == ref->type      ? ++match_lvl : match_lvl;
+		entry->direction == ref->direction ? ++match_lvl : match_lvl;
+
+		if (match_lvl == 3) {
+			/* perfect-fit - return the result */
 			return entry;
+		} else if (match_lvl > last_lvl) {
+			/*
+			 * We found an entry that fits better then the
+			 * previous one
+			 */
+			last_lvl = match_lvl;
+			ret      = entry;
+		}
 	}
 
-	return NULL;
+	/*
+	 * If we have multiple matches but no perfect-fit, just return
+	 * NULL.
+	 */
+	ret = (matches == 1) ? ret : NULL;
+
+	return ret;
 }
 
 /*
@@ -257,6 +349,21 @@ static void add_dma_entry(struct dma_debug_entry *entry)
 	put_hash_bucket(bucket, &flags);
 }
 
+static struct dma_debug_entry *__dma_entry_alloc(void)
+{
+	struct dma_debug_entry *entry;
+
+	entry = list_entry(free_entries.next, struct dma_debug_entry, list);
+	list_del(&entry->list);
+	memset(entry, 0, sizeof(*entry));
+
+	num_free_entries -= 1;
+	if (num_free_entries < min_free_entries)
+		min_free_entries = num_free_entries;
+
+	return entry;
+}
+
 /* struct dma_entry allocator
  *
  * The next two functions implement the allocator for
@@ -270,15 +377,12 @@ static struct dma_debug_entry *dma_entry_alloc(void)
 	spin_lock_irqsave(&free_entries_lock, flags);
 
 	if (list_empty(&free_entries)) {
-		printk(KERN_ERR "DMA-API: debugging out of memory "
-				"- disabling\n");
+		pr_err("DMA-API: debugging out of memory - disabling\n");
 		global_disable = true;
 		goto out;
 	}
 
-	entry = list_entry(free_entries.next, struct dma_debug_entry, list);
-	list_del(&entry->list);
-	memset(entry, 0, sizeof(*entry));
+	entry = __dma_entry_alloc();
 
 #ifdef CONFIG_STACKTRACE
 	entry->stacktrace.max_entries = DMA_DEBUG_STACKTRACE_ENTRIES;
@@ -286,9 +390,6 @@ static struct dma_debug_entry *dma_entry_alloc(void)
 	entry->stacktrace.skip = 2;
 	save_stack_trace(&entry->stacktrace);
 #endif
-	num_free_entries -= 1;
-	if (num_free_entries < min_free_entries)
-		min_free_entries = num_free_entries;
 
 out:
 	spin_unlock_irqrestore(&free_entries_lock, flags);
@@ -310,6 +411,53 @@ static void dma_entry_free(struct dma_debug_entry *entry)
 	spin_unlock_irqrestore(&free_entries_lock, flags);
 }
 
+int dma_debug_resize_entries(u32 num_entries)
+{
+	int i, delta, ret = 0;
+	unsigned long flags;
+	struct dma_debug_entry *entry;
+	LIST_HEAD(tmp);
+
+	spin_lock_irqsave(&free_entries_lock, flags);
+
+	if (nr_total_entries < num_entries) {
+		delta = num_entries - nr_total_entries;
+
+		spin_unlock_irqrestore(&free_entries_lock, flags);
+
+		for (i = 0; i < delta; i++) {
+			entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+			if (!entry)
+				break;
+
+			list_add_tail(&entry->list, &tmp);
+		}
+
+		spin_lock_irqsave(&free_entries_lock, flags);
+
+		list_splice(&tmp, &free_entries);
+		nr_total_entries += i;
+		num_free_entries += i;
+	} else {
+		delta = nr_total_entries - num_entries;
+
+		for (i = 0; i < delta && !list_empty(&free_entries); i++) {
+			entry = __dma_entry_alloc();
+			kfree(entry);
+		}
+
+		nr_total_entries -= i;
+	}
+
+	if (nr_total_entries != num_entries)
+		ret = 1;
+
+	spin_unlock_irqrestore(&free_entries_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(dma_debug_resize_entries);
+
 /*
  * DMA-API debugging init code
  *
@@ -334,8 +482,7 @@ static int prealloc_memory(u32 num_entries)
 	num_free_entries = num_entries;
 	min_free_entries = num_entries;
 
-	printk(KERN_INFO "DMA-API: preallocated %d debug entries\n",
-			num_entries);
+	pr_info("DMA-API: preallocated %d debug entries\n", num_entries);
 
 	return 0;
 
@@ -349,11 +496,102 @@ out_err:
 	return -ENOMEM;
 }
 
+static ssize_t filter_read(struct file *file, char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	char buf[NAME_MAX_LEN + 1];
+	unsigned long flags;
+	int len;
+
+	if (!current_driver_name[0])
+		return 0;
+
+	/*
+	 * We can't copy to userspace directly because current_driver_name can
+	 * only be read under the driver_name_lock with irqs disabled. So
+	 * create a temporary copy first.
+	 */
+	read_lock_irqsave(&driver_name_lock, flags);
+	len = scnprintf(buf, NAME_MAX_LEN + 1, "%s\n", current_driver_name);
+	read_unlock_irqrestore(&driver_name_lock, flags);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t filter_write(struct file *file, const char __user *userbuf,
+			    size_t count, loff_t *ppos)
+{
+	char buf[NAME_MAX_LEN];
+	unsigned long flags;
+	size_t len;
+	int i;
+
+	/*
+	 * We can't copy from userspace directly. Access to
+	 * current_driver_name is protected with a write_lock with irqs
+	 * disabled. Since copy_from_user can fault and may sleep we
+	 * need to copy to temporary buffer first
+	 */
+	len = min(count, (size_t)(NAME_MAX_LEN - 1));
+	if (copy_from_user(buf, userbuf, len))
+		return -EFAULT;
+
+	buf[len] = 0;
+
+	write_lock_irqsave(&driver_name_lock, flags);
+
+	/*
+	 * Now handle the string we got from userspace very carefully.
+	 * The rules are:
+	 *         - only use the first token we got
+	 *         - token delimiter is everything looking like a space
+	 *           character (' ', '\n', '\t' ...)
+	 *
+	 */
+	if (!isalnum(buf[0])) {
+		/*
+		 * If the first character userspace gave us is not
+		 * alphanumerical then assume the filter should be
+		 * switched off.
+		 */
+		if (current_driver_name[0])
+			pr_info("DMA-API: switching off dma-debug driver filter\n");
+		current_driver_name[0] = 0;
+		current_driver = NULL;
+		goto out_unlock;
+	}
+
+	/*
+	 * Now parse out the first token and use it as the name for the
+	 * driver to filter for.
+	 */
+	for (i = 0; i < NAME_MAX_LEN; ++i) {
+		current_driver_name[i] = buf[i];
+		if (isspace(buf[i]) || buf[i] == ' ' || buf[i] == 0)
+			break;
+	}
+	current_driver_name[i] = 0;
+	current_driver = NULL;
+
+	pr_info("DMA-API: enable driver filter for driver [%s]\n",
+		current_driver_name);
+
+out_unlock:
+	write_unlock_irqrestore(&driver_name_lock, flags);
+
+	return count;
+}
+
+const struct file_operations filter_fops = {
+	.read  = filter_read,
+	.write = filter_write,
+};
+
 static int dma_debug_fs_init(void)
 {
 	dma_debug_dent = debugfs_create_dir("dma-api", NULL);
 	if (!dma_debug_dent) {
-		printk(KERN_ERR "DMA-API: can not create debugfs directory\n");
+		pr_err("DMA-API: can not create debugfs directory\n");
 		return -ENOMEM;
 	}
 
@@ -392,6 +630,11 @@ static int dma_debug_fs_init(void)
 	if (!min_free_entries_dent)
 		goto out_err;
 
+	filter_dent = debugfs_create_file("driver_filter", 0644,
+					  dma_debug_dent, NULL, &filter_fops);
+	if (!filter_dent)
+		goto out_err;
+
 	return 0;
 
 out_err:
@@ -400,9 +643,64 @@ out_err:
 	return -ENOMEM;
 }
 
+static int device_dma_allocations(struct device *dev)
+{
+	struct dma_debug_entry *entry;
+	unsigned long flags;
+	int count = 0, i;
+
+	local_irq_save(flags);
+
+	for (i = 0; i < HASH_SIZE; ++i) {
+		spin_lock(&dma_entry_hash[i].lock);
+		list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
+			if (entry->dev == dev)
+				count += 1;
+		}
+		spin_unlock(&dma_entry_hash[i].lock);
+	}
+
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static int dma_debug_device_change(struct notifier_block *nb,
+				    unsigned long action, void *data)
+{
+	struct device *dev = data;
+	int count;
+
+
+	switch (action) {
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		count = device_dma_allocations(dev);
+		if (count == 0)
+			break;
+		err_printk(dev, NULL, "DMA-API: device driver has pending "
+				"DMA allocations while released from device "
+				"[count=%d]\n", count);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 void dma_debug_add_bus(struct bus_type *bus)
 {
-	/* FIXME: register notifier */
+	struct notifier_block *nb;
+
+	nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
+	if (nb == NULL) {
+		pr_err("dma_debug_add_bus: out of memory\n");
+		return;
+	}
+
+	nb->notifier_call = dma_debug_device_change;
+
+	bus_register_notifier(bus, nb);
 }
 
 /*
@@ -421,8 +719,7 @@ void dma_debug_init(u32 num_entries)
 	}
 
 	if (dma_debug_fs_init() != 0) {
-		printk(KERN_ERR "DMA-API: error creating debugfs entries "
-				"- disabling\n");
+		pr_err("DMA-API: error creating debugfs entries - disabling\n");
 		global_disable = true;
 
 		return;
@@ -432,14 +729,15 @@ void dma_debug_init(u32 num_entries)
 		num_entries = req_entries;
 
 	if (prealloc_memory(num_entries) != 0) {
-		printk(KERN_ERR "DMA-API: debugging out of memory error "
-				"- disabled\n");
+		pr_err("DMA-API: debugging out of memory error - disabled\n");
 		global_disable = true;
 
 		return;
 	}
 
-	printk(KERN_INFO "DMA-API: debugging enabled by kernel config\n");
+	nr_total_entries = num_free_entries;
+
+	pr_info("DMA-API: debugging enabled by kernel config\n");
 }
 
 static __init int dma_debug_cmdline(char *str)
@@ -448,8 +746,7 @@ static __init int dma_debug_cmdline(char *str)
 		return -EINVAL;
 
 	if (strncmp(str, "off", 3) == 0) {
-		printk(KERN_INFO "DMA-API: debugging disabled on kernel "
-				 "command line\n");
+		pr_info("DMA-API: debugging disabled on kernel command line\n");
 		global_disable = true;
 	}
 
@@ -723,15 +1020,15 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
 		entry->type           = dma_debug_sg;
 		entry->dev            = dev;
 		entry->paddr          = sg_phys(s);
-		entry->size           = s->length;
-		entry->dev_addr       = s->dma_address;
+		entry->size           = sg_dma_len(s);
+		entry->dev_addr       = sg_dma_address(s);
 		entry->direction      = direction;
 		entry->sg_call_ents   = nents;
 		entry->sg_mapped_ents = mapped_ents;
 
 		if (!PageHighMem(sg_page(s))) {
 			check_for_stack(dev, sg_virt(s));
-			check_for_illegal_area(dev, sg_virt(s), s->length);
+			check_for_illegal_area(dev, sg_virt(s), sg_dma_len(s));
 		}
 
 		add_dma_entry(entry);
@@ -739,13 +1036,33 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(debug_dma_map_sg);
 
+static int get_nr_mapped_entries(struct device *dev, struct scatterlist *s)
+{
+	struct dma_debug_entry *entry, ref;
+	struct hash_bucket *bucket;
+	unsigned long flags;
+	int mapped_ents;
+
+	ref.dev      = dev;
+	ref.dev_addr = sg_dma_address(s);
+	ref.size     = sg_dma_len(s),
+
+	bucket       = get_hash_bucket(&ref, &flags);
+	entry        = hash_bucket_find(bucket, &ref);
+	mapped_ents  = 0;
+
+	if (entry)
+		mapped_ents = entry->sg_mapped_ents;
+	put_hash_bucket(bucket, &flags);
+
+	return mapped_ents;
+}
+
 void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 			int nelems, int dir)
 {
-	struct dma_debug_entry *entry;
 	struct scatterlist *s;
 	int mapped_ents = 0, i;
-	unsigned long flags;
 
 	if (unlikely(global_disable))
 		return;
@@ -756,8 +1073,8 @@ void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 			.type           = dma_debug_sg,
 			.dev            = dev,
 			.paddr          = sg_phys(s),
-			.dev_addr       = s->dma_address,
-			.size           = s->length,
+			.dev_addr       = sg_dma_address(s),
+			.size           = sg_dma_len(s),
 			.direction      = dir,
 			.sg_call_ents   = 0,
 		};
@@ -765,14 +1082,9 @@ void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		if (mapped_ents && i >= mapped_ents)
 			break;
 
-		if (mapped_ents == 0) {
-			struct hash_bucket *bucket;
+		if (!i) {
 			ref.sg_call_ents = nelems;
-			bucket = get_hash_bucket(&ref, &flags);
-			entry = hash_bucket_find(bucket, &ref);
-			if (entry)
-				mapped_ents = entry->sg_mapped_ents;
-			put_hash_bucket(bucket, &flags);
+			mapped_ents = get_nr_mapped_entries(dev, s);
 		}
 
 		check_unmap(&ref);
@@ -874,14 +1186,20 @@ void debug_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 			       int nelems, int direction)
 {
 	struct scatterlist *s;
-	int i;
+	int mapped_ents = 0, i;
 
 	if (unlikely(global_disable))
 		return;
 
 	for_each_sg(sg, s, nelems, i) {
-		check_sync(dev, s->dma_address, s->dma_length, 0,
-				direction, true);
+		if (!i)
+			mapped_ents = get_nr_mapped_entries(dev, s);
+
+		if (i >= mapped_ents)
+			break;
+
+		check_sync(dev, sg_dma_address(s), sg_dma_len(s), 0,
+			   direction, true);
 	}
 }
 EXPORT_SYMBOL(debug_dma_sync_sg_for_cpu);
@@ -890,15 +1208,39 @@ void debug_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 				  int nelems, int direction)
 {
 	struct scatterlist *s;
-	int i;
+	int mapped_ents = 0, i;
 
 	if (unlikely(global_disable))
 		return;
 
 	for_each_sg(sg, s, nelems, i) {
-		check_sync(dev, s->dma_address, s->dma_length, 0,
-				direction, false);
+		if (!i)
+			mapped_ents = get_nr_mapped_entries(dev, s);
+
+		if (i >= mapped_ents)
+			break;
+
+		check_sync(dev, sg_dma_address(s), sg_dma_len(s), 0,
+			   direction, false);
 	}
 }
 EXPORT_SYMBOL(debug_dma_sync_sg_for_device);
 
+static int __init dma_debug_driver_setup(char *str)
+{
+	int i;
+
+	for (i = 0; i < NAME_MAX_LEN - 1; ++i, ++str) {
+		current_driver_name[i] = *str;
+		if (*str == 0)
+			break;
+	}
+
+	if (current_driver_name[0])
+		pr_info("DMA-API: enable driver filter for driver [%s]\n",
+			current_driver_name);
+
+
+	return 1;
+}
+__setup("dma_debug_driver=", dma_debug_driver_setup);
diff --git a/lib/extable.c b/lib/extable.c
index 179c0874559..4cac81ec225 100644
--- a/lib/extable.c
+++ b/lib/extable.c
@@ -39,7 +39,26 @@ void sort_extable(struct exception_table_entry *start,
 	sort(start, finish - start, sizeof(struct exception_table_entry),
 	     cmp_ex, NULL);
 }
-#endif
+
+#ifdef CONFIG_MODULES
+/*
+ * If the exception table is sorted, any referring to the module init
+ * will be at the beginning or the end.
+ */
+void trim_init_extable(struct module *m)
+{
+	/*trim the beginning*/
+	while (m->num_exentries && within_module_init(m->extable[0].insn, m)) {
+		m->extable++;
+		m->num_exentries--;
+	}
+	/*trim the end*/
+	while (m->num_exentries &&
+		within_module_init(m->extable[m->num_exentries-1].insn, m))
+		m->num_exentries--;
+}
+#endif /* CONFIG_MODULES */
+#endif /* !ARCH_HAS_SORT_EXTABLE */
 
 #ifndef ARCH_HAS_SEARCH_EXTABLE
 /*
diff --git a/lib/rational.c b/lib/rational.c
new file mode 100644
index 00000000000..b3c099b5478
--- /dev/null
+++ b/lib/rational.c
@@ -0,0 +1,62 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers
+ */
+
+#include <linux/rational.h>
+
+/*
+ * calculate best rational approximation for a given fraction
+ * taking into account restricted register size, e.g. to find
+ * appropriate values for a pll with 5 bit denominator and
+ * 8 bit numerator register fields, trying to set up with a
+ * frequency ratio of 3.1415, one would say:
+ *
+ * rational_best_approximation(31415, 10000,
+ *		(1 << 8) - 1, (1 << 5) - 1, &n, &d);
+ *
+ * you may look at given_numerator as a fixed point number,
+ * with the fractional part size described in given_denominator.
+ *
+ * for theoretical background, see:
+ * http://en.wikipedia.org/wiki/Continued_fraction
+ */
+
+void rational_best_approximation(
+	unsigned long given_numerator, unsigned long given_denominator,
+	unsigned long max_numerator, unsigned long max_denominator,
+	unsigned long *best_numerator, unsigned long *best_denominator)
+{
+	unsigned long n, d, n0, d0, n1, d1;
+	n = given_numerator;
+	d = given_denominator;
+	n0 = d1 = 0;
+	n1 = d0 = 1;
+	for (;;) {
+		unsigned long t, a;
+		if ((n1 > max_numerator) || (d1 > max_denominator)) {
+			n1 = n0;
+			d1 = d0;
+			break;
+		}
+		if (d == 0)
+			break;
+		t = d;
+		a = n / d;
+		d = n % d;
+		n = t;
+		t = n0 + a * n1;
+		n0 = n1;
+		n1 = t;
+		t = d0 + a * d1;
+		d0 = d1;
+		d1 = t;
+	}
+	*best_numerator = n1;
+	*best_denominator = d1;
+}
+
+EXPORT_SYMBOL(rational_best_approximation);
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 2b0b5a7d2ce..bffe6d7ef9d 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -60,8 +60,8 @@ enum dma_sync_target {
 int swiotlb_force;
 
 /*
- * Used to do a quick range check in swiotlb_unmap_single and
- * swiotlb_sync_single_*, to see if the memory was in fact allocated by this
+ * Used to do a quick range check in unmap_single and
+ * sync_single_*, to see if the memory was in fact allocated by this
  * API.
  */
 static char *io_tlb_start, *io_tlb_end;
@@ -129,7 +129,7 @@ dma_addr_t __weak swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 	return paddr;
 }
 
-phys_addr_t __weak swiotlb_bus_to_phys(dma_addr_t baddr)
+phys_addr_t __weak swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 {
 	return baddr;
 }
@@ -140,9 +140,15 @@ static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
 	return swiotlb_phys_to_bus(hwdev, virt_to_phys(address));
 }
 
-static void *swiotlb_bus_to_virt(dma_addr_t address)
+void * __weak swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t address)
 {
-	return phys_to_virt(swiotlb_bus_to_phys(address));
+	return phys_to_virt(swiotlb_bus_to_phys(hwdev, address));
+}
+
+int __weak swiotlb_arch_address_needs_mapping(struct device *hwdev,
+					       dma_addr_t addr, size_t size)
+{
+	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
 }
 
 int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
@@ -309,10 +315,10 @@ cleanup1:
 	return -ENOMEM;
 }
 
-static int
+static inline int
 address_needs_mapping(struct device *hwdev, dma_addr_t addr, size_t size)
 {
-	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+	return swiotlb_arch_address_needs_mapping(hwdev, addr, size);
 }
 
 static inline int range_needs_mapping(phys_addr_t paddr, size_t size)
@@ -341,7 +347,7 @@ static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
 		unsigned long flags;
 
 		while (size) {
-			sz = min(PAGE_SIZE - offset, size);
+			sz = min_t(size_t, PAGE_SIZE - offset, size);
 
 			local_irq_save(flags);
 			buffer = kmap_atomic(pfn_to_page(pfn),
@@ -476,7 +482,7 @@ found:
  * dma_addr is the kernel virtual address of the bounce buffer to unmap.
  */
 static void
-unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
+do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
 {
 	unsigned long flags;
 	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
@@ -560,7 +566,6 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 				   size)) {
 		/*
 		 * The allocated memory isn't reachable by the device.
-		 * Fall back on swiotlb_map_single().
 		 */
 		free_pages((unsigned long) ret, order);
 		ret = NULL;
@@ -568,9 +573,8 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	if (!ret) {
 		/*
 		 * We are either out of memory or the device can't DMA
-		 * to GFP_DMA memory; fall back on
-		 * swiotlb_map_single(), which will grab memory from
-		 * the lowest available address range.
+		 * to GFP_DMA memory; fall back on map_single(), which
+		 * will grab memory from the lowest available address range.
 		 */
 		ret = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
 		if (!ret)
@@ -587,7 +591,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		       (unsigned long long)dev_addr);
 
 		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
+		do_unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
 		return NULL;
 	}
 	*dma_handle = dev_addr;
@@ -604,7 +608,7 @@ swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 		free_pages((unsigned long) vaddr, get_order(size));
 	else
 		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
+		do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
 }
 EXPORT_SYMBOL(swiotlb_free_coherent);
 
@@ -634,7 +638,7 @@ swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
  * physical address to use is returned.
  *
  * Once the device is given the dma address, the device owns this memory until
- * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed.
+ * either swiotlb_unmap_page or swiotlb_dma_sync_single is performed.
  */
 dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 			    unsigned long offset, size_t size,
@@ -642,18 +646,17 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 			    struct dma_attrs *attrs)
 {
 	phys_addr_t phys = page_to_phys(page) + offset;
-	void *ptr = page_address(page) + offset;
 	dma_addr_t dev_addr = swiotlb_phys_to_bus(dev, phys);
 	void *map;
 
 	BUG_ON(dir == DMA_NONE);
 	/*
-	 * If the pointer passed in happens to be in the device's DMA window,
+	 * If the address happens to be in the device's DMA window,
 	 * we can safely return the device addr and not worry about bounce
 	 * buffering it.
 	 */
 	if (!address_needs_mapping(dev, dev_addr, size) &&
-	    !range_needs_mapping(virt_to_phys(ptr), size))
+	    !range_needs_mapping(phys, size))
 		return dev_addr;
 
 	/*
@@ -679,23 +682,35 @@ EXPORT_SYMBOL_GPL(swiotlb_map_page);
 
 /*
  * Unmap a single streaming mode DMA translation.  The dma_addr and size must
- * match what was provided for in a previous swiotlb_map_single call.  All
+ * match what was provided for in a previous swiotlb_map_page call.  All
  * other usages are undefined.
  *
  * After this call, reads by the cpu to the buffer are guaranteed to see
  * whatever the device wrote there.
  */
+static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+			 size_t size, int dir)
+{
+	char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
+
+	BUG_ON(dir == DMA_NONE);
+
+	if (is_swiotlb_buffer(dma_addr)) {
+		do_unmap_single(hwdev, dma_addr, size, dir);
+		return;
+	}
+
+	if (dir != DMA_FROM_DEVICE)
+		return;
+
+	dma_mark_clean(dma_addr, size);
+}
+
 void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 			size_t size, enum dma_data_direction dir,
 			struct dma_attrs *attrs)
 {
-	char *dma_addr = swiotlb_bus_to_virt(dev_addr);
-
-	BUG_ON(dir == DMA_NONE);
-	if (is_swiotlb_buffer(dma_addr))
-		unmap_single(hwdev, dma_addr, size, dir);
-	else if (dir == DMA_FROM_DEVICE)
-		dma_mark_clean(dma_addr, size);
+	unmap_single(hwdev, dev_addr, size, dir);
 }
 EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
 
@@ -703,7 +718,7 @@ EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
  * Make physical memory consistent for a single streaming mode DMA translation
  * after a transfer.
  *
- * If you perform a swiotlb_map_single() but wish to interrogate the buffer
+ * If you perform a swiotlb_map_page() but wish to interrogate the buffer
  * using the cpu, yet do not wish to teardown the dma mapping, you must
  * call this function before doing so.  At the next point you give the dma
  * address back to the card, you must first perform a
@@ -713,13 +728,19 @@ static void
 swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
 		    size_t size, int dir, int target)
 {
-	char *dma_addr = swiotlb_bus_to_virt(dev_addr);
+	char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
-	if (is_swiotlb_buffer(dma_addr))
+
+	if (is_swiotlb_buffer(dma_addr)) {
 		sync_single(hwdev, dma_addr, size, dir, target);
-	else if (dir == DMA_FROM_DEVICE)
-		dma_mark_clean(dma_addr, size);
+		return;
+	}
+
+	if (dir != DMA_FROM_DEVICE)
+		return;
+
+	dma_mark_clean(dma_addr, size);
 }
 
 void
@@ -746,13 +767,7 @@ swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr,
 			  unsigned long offset, size_t size,
 			  int dir, int target)
 {
-	char *dma_addr = swiotlb_bus_to_virt(dev_addr) + offset;
-
-	BUG_ON(dir == DMA_NONE);
-	if (is_swiotlb_buffer(dma_addr))
-		sync_single(hwdev, dma_addr, size, dir, target);
-	else if (dir == DMA_FROM_DEVICE)
-		dma_mark_clean(dma_addr, size);
+	swiotlb_sync_single(hwdev, dev_addr + offset, size, dir, target);
 }
 
 void
@@ -777,7 +792,7 @@ EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device);
 
 /*
  * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scatter-gather version of the above swiotlb_map_single
+ * This is the scatter-gather version of the above swiotlb_map_page
  * interface.  Here the scatter gather list elements are each tagged with the
  * appropriate dma address and length.  They are obtained via
  * sg_dma_{address,length}(SG).
@@ -788,7 +803,7 @@ EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device);
  *       The routine returns the number of addr/length pairs actually
  *       used, at most nents.
  *
- * Device ownership issues as mentioned above for swiotlb_map_single are the
+ * Device ownership issues as mentioned above for swiotlb_map_page are the
  * same here.
  */
 int
@@ -836,7 +851,7 @@ EXPORT_SYMBOL(swiotlb_map_sg);
 
 /*
  * Unmap a set of streaming mode DMA translations.  Again, cpu read rules
- * concerning calls here are the same as for swiotlb_unmap_single() above.
+ * concerning calls here are the same as for swiotlb_unmap_page() above.
  */
 void
 swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
@@ -847,13 +862,9 @@ swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
 
 	BUG_ON(dir == DMA_NONE);
 
-	for_each_sg(sgl, sg, nelems, i) {
-		if (sg->dma_address != swiotlb_phys_to_bus(hwdev, sg_phys(sg)))
-			unmap_single(hwdev, swiotlb_bus_to_virt(sg->dma_address),
-				     sg->dma_length, dir);
-		else if (dir == DMA_FROM_DEVICE)
-			dma_mark_clean(swiotlb_bus_to_virt(sg->dma_address), sg->dma_length);
-	}
+	for_each_sg(sgl, sg, nelems, i)
+		unmap_single(hwdev, sg->dma_address, sg->dma_length, dir);
+
 }
 EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
 
@@ -879,15 +890,9 @@ swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
 	struct scatterlist *sg;
 	int i;
 
-	BUG_ON(dir == DMA_NONE);
-
-	for_each_sg(sgl, sg, nelems, i) {
-		if (sg->dma_address != swiotlb_phys_to_bus(hwdev, sg_phys(sg)))
-			sync_single(hwdev, swiotlb_bus_to_virt(sg->dma_address),
+	for_each_sg(sgl, sg, nelems, i)
+		swiotlb_sync_single(hwdev, sg->dma_address,
 				    sg->dma_length, dir, target);
-		else if (dir == DMA_FROM_DEVICE)
-			dma_mark_clean(swiotlb_bus_to_virt(sg->dma_address), sg->dma_length);
-	}
 }
 
 void
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 7536acea135..756ccafa9ce 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -408,6 +408,8 @@ enum format_type {
 	FORMAT_TYPE_LONG_LONG,
 	FORMAT_TYPE_ULONG,
 	FORMAT_TYPE_LONG,
+	FORMAT_TYPE_UBYTE,
+	FORMAT_TYPE_BYTE,
 	FORMAT_TYPE_USHORT,
 	FORMAT_TYPE_SHORT,
 	FORMAT_TYPE_UINT,
@@ -573,12 +575,15 @@ static char *string(char *buf, char *end, char *s, struct printf_spec spec)
 }
 
 static char *symbol_string(char *buf, char *end, void *ptr,
-				struct printf_spec spec)
+				struct printf_spec spec, char ext)
 {
 	unsigned long value = (unsigned long) ptr;
 #ifdef CONFIG_KALLSYMS
 	char sym[KSYM_SYMBOL_LEN];
-	sprint_symbol(sym, value);
+	if (ext != 'f')
+		sprint_symbol(sym, value);
+	else
+		kallsyms_lookup(value, NULL, NULL, NULL, sym);
 	return string(buf, end, sym, spec);
 #else
 	spec.field_width = 2*sizeof(void *);
@@ -690,7 +695,8 @@ static char *ip4_addr_string(char *buf, char *end, u8 *addr,
  *
  * Right now we handle:
  *
- * - 'F' For symbolic function descriptor pointers
+ * - 'F' For symbolic function descriptor pointers with offset
+ * - 'f' For simple symbolic function names without offset
  * - 'S' For symbolic direct pointers
  * - 'R' For a struct resource pointer, it prints the range of
  *       addresses (not the name nor the flags)
@@ -713,10 +719,11 @@ static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
 
 	switch (*fmt) {
 	case 'F':
+	case 'f':
 		ptr = dereference_function_descriptor(ptr);
 		/* Fallthrough */
 	case 'S':
-		return symbol_string(buf, end, ptr, spec);
+		return symbol_string(buf, end, ptr, spec, *fmt);
 	case 'R':
 		return resource_string(buf, end, ptr, spec);
 	case 'm':
@@ -853,11 +860,15 @@ qualifier:
 	spec->qualifier = -1;
 	if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' ||
 	    *fmt == 'Z' || *fmt == 'z' || *fmt == 't') {
-		spec->qualifier = *fmt;
-		++fmt;
-		if (spec->qualifier == 'l' && *fmt == 'l') {
-			spec->qualifier = 'L';
-			++fmt;
+		spec->qualifier = *fmt++;
+		if (unlikely(spec->qualifier == *fmt)) {
+			if (spec->qualifier == 'l') {
+				spec->qualifier = 'L';
+				++fmt;
+			} else if (spec->qualifier == 'h') {
+				spec->qualifier = 'H';
+				++fmt;
+			}
 		}
 	}
 
@@ -919,6 +930,11 @@ qualifier:
 		spec->type = FORMAT_TYPE_SIZE_T;
 	} else if (spec->qualifier == 't') {
 		spec->type = FORMAT_TYPE_PTRDIFF;
+	} else if (spec->qualifier == 'H') {
+		if (spec->flags & SIGN)
+			spec->type = FORMAT_TYPE_BYTE;
+		else
+			spec->type = FORMAT_TYPE_UBYTE;
 	} else if (spec->qualifier == 'h') {
 		if (spec->flags & SIGN)
 			spec->type = FORMAT_TYPE_SHORT;
@@ -943,7 +959,8 @@ qualifier:
  *
  * This function follows C99 vsnprintf, but has some extensions:
  * %pS output the name of a text symbol
- * %pF output the name of a function pointer
+ * %pF output the name of a function pointer with its offset
+ * %pf output the name of a function pointer without its offset
  * %pR output the address range in a struct resource
  *
  * The return value is the number of characters which would
@@ -1087,6 +1104,12 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
 			case FORMAT_TYPE_PTRDIFF:
 				num = va_arg(args, ptrdiff_t);
 				break;
+			case FORMAT_TYPE_UBYTE:
+				num = (unsigned char) va_arg(args, int);
+				break;
+			case FORMAT_TYPE_BYTE:
+				num = (signed char) va_arg(args, int);
+				break;
 			case FORMAT_TYPE_USHORT:
 				num = (unsigned short) va_arg(args, int);
 				break;
@@ -1363,6 +1386,10 @@ do {									\
 			case FORMAT_TYPE_PTRDIFF:
 				save_arg(ptrdiff_t);
 				break;
+			case FORMAT_TYPE_UBYTE:
+			case FORMAT_TYPE_BYTE:
+				save_arg(char);
+				break;
 			case FORMAT_TYPE_USHORT:
 			case FORMAT_TYPE_SHORT:
 				save_arg(short);
@@ -1391,7 +1418,8 @@ EXPORT_SYMBOL_GPL(vbin_printf);
  *
  * The format follows C99 vsnprintf, but has some extensions:
  * %pS output the name of a text symbol
- * %pF output the name of a function pointer
+ * %pF output the name of a function pointer with its offset
+ * %pf output the name of a function pointer without its offset
  * %pR output the address range in a struct resource
  * %n is ignored
  *
@@ -1538,6 +1566,12 @@ int bstr_printf(char *buf, size_t size, const char *fmt, const u32 *bin_buf)
 			case FORMAT_TYPE_PTRDIFF:
 				num = get_arg(ptrdiff_t);
 				break;
+			case FORMAT_TYPE_UBYTE:
+				num = get_arg(unsigned char);
+				break;
+			case FORMAT_TYPE_BYTE:
+				num = get_arg(signed char);
+				break;
 			case FORMAT_TYPE_USHORT:
 				num = get_arg(unsigned short);
 				break;
diff --git a/mm/Kconfig b/mm/Kconfig
index c2b57d81e15..71830ba7b98 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -226,6 +226,25 @@ config HAVE_MLOCKED_PAGE_BIT
 config MMU_NOTIFIER
 	bool
 
+config DEFAULT_MMAP_MIN_ADDR
+        int "Low address space to protect from user allocation"
+        default 4096
+        help
+	  This is the portion of low virtual memory which should be protected
+	  from userspace allocation.  Keeping a user from writing to low pages
+	  can help reduce the impact of kernel NULL pointer bugs.
+
+	  For most ia64, ppc64 and x86 users with lots of address space
+	  a value of 65536 is reasonable and should cause no problems.
+	  On arm and other archs it should not be higher than 32768.
+	  Programs which use vm86 functionality would either need additional
+	  permissions from either the LSM or the capabilities module or have
+	  this protection disabled.
+
+	  This value can be changed after boot using the
+	  /proc/sys/vm/mmap_min_addr tunable.
+
+
 config NOMMU_INITIAL_TRIM_EXCESS
 	int "Turn on mmap() excess space trimming before booting"
 	depends on !MMU
diff --git a/mm/Makefile b/mm/Makefile
index ec73c68b601..e89acb090b4 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -38,3 +38,5 @@ obj-$(CONFIG_SMP) += allocpercpu.o
 endif
 obj-$(CONFIG_QUICKLIST) += quicklist.o
 obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
+obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
+obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
diff --git a/mm/bootmem.c b/mm/bootmem.c
index daf92713f7d..282df0a09e6 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -532,6 +532,9 @@ static void * __init alloc_arch_preferred_bootmem(bootmem_data_t *bdata,
 					unsigned long size, unsigned long align,
 					unsigned long goal, unsigned long limit)
 {
+	if (WARN_ON_ONCE(slab_is_available()))
+		return kzalloc(size, GFP_NOWAIT);
+
 #ifdef CONFIG_HAVE_ARCH_BOOTMEM
 	bootmem_data_t *p_bdata;
 
@@ -662,6 +665,9 @@ static void * __init ___alloc_bootmem_node(bootmem_data_t *bdata,
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
+	if (WARN_ON_ONCE(slab_is_available()))
+		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
+
 	return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
 }
 
@@ -693,6 +699,9 @@ void * __init __alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size,
 {
 	void *ptr;
 
+	if (WARN_ON_ONCE(slab_is_available()))
+		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
+
 	ptr = alloc_arch_preferred_bootmem(pgdat->bdata, size, align, goal, 0);
 	if (ptr)
 		return ptr;
@@ -745,6 +754,9 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
+	if (WARN_ON_ONCE(slab_is_available()))
+		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
+
 	return ___alloc_bootmem_node(pgdat->bdata, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 }
diff --git a/mm/bounce.c b/mm/bounce.c
index e590272fe7a..4ebe3ea8379 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -14,16 +14,15 @@
 #include <linux/hash.h>
 #include <linux/highmem.h>
 #include <linux/blktrace_api.h>
-#include <trace/block.h>
 #include <asm/tlbflush.h>
 
+#include <trace/events/block.h>
+
 #define POOL_SIZE	64
 #define ISA_POOL_SIZE	16
 
 static mempool_t *page_pool, *isa_page_pool;
 
-DEFINE_TRACE(block_bio_bounce);
-
 #ifdef CONFIG_HIGHMEM
 static __init int init_emergency_pool(void)
 {
@@ -192,7 +191,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
 		/*
 		 * is destination page below bounce pfn?
 		 */
-		if (page_to_pfn(page) <= q->bounce_pfn)
+		if (page_to_pfn(page) <= queue_bounce_pfn(q))
 			continue;
 
 		/*
@@ -284,7 +283,7 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 	 * don't waste time iterating over bio segments
 	 */
 	if (!(q->bounce_gfp & GFP_DMA)) {
-		if (q->bounce_pfn >= blk_max_pfn)
+		if (queue_bounce_pfn(q) >= blk_max_pfn)
 			return;
 		pool = page_pool;
 	} else {
diff --git a/mm/filemap.c b/mm/filemap.c
index 379ff0bcbf6..1b60f30cebf 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -121,7 +121,6 @@ void __remove_from_page_cache(struct page *page)
 	mapping->nrpages--;
 	__dec_zone_page_state(page, NR_FILE_PAGES);
 	BUG_ON(page_mapped(page));
-	mem_cgroup_uncharge_cache_page(page);
 
 	/*
 	 * Some filesystems seem to re-dirty the page even after
@@ -145,6 +144,7 @@ void remove_from_page_cache(struct page *page)
 	spin_lock_irq(&mapping->tree_lock);
 	__remove_from_page_cache(page);
 	spin_unlock_irq(&mapping->tree_lock);
+	mem_cgroup_uncharge_cache_page(page);
 }
 
 static int sync_page(void *word)
@@ -476,13 +476,13 @@ int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
 		if (likely(!error)) {
 			mapping->nrpages++;
 			__inc_zone_page_state(page, NR_FILE_PAGES);
+			spin_unlock_irq(&mapping->tree_lock);
 		} else {
 			page->mapping = NULL;
+			spin_unlock_irq(&mapping->tree_lock);
 			mem_cgroup_uncharge_cache_page(page);
 			page_cache_release(page);
 		}
-
-		spin_unlock_irq(&mapping->tree_lock);
 		radix_tree_preload_end();
 	} else
 		mem_cgroup_uncharge_cache_page(page);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 28c655ba935..e83ad2c9228 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -316,7 +316,7 @@ static void resv_map_release(struct kref *ref)
 static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
-	if (!(vma->vm_flags & VM_SHARED))
+	if (!(vma->vm_flags & VM_MAYSHARE))
 		return (struct resv_map *)(get_vma_private_data(vma) &
 							~HPAGE_RESV_MASK);
 	return NULL;
@@ -325,7 +325,7 @@ static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
 static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
-	VM_BUG_ON(vma->vm_flags & VM_SHARED);
+	VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
 
 	set_vma_private_data(vma, (get_vma_private_data(vma) &
 				HPAGE_RESV_MASK) | (unsigned long)map);
@@ -334,7 +334,7 @@ static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
 static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
-	VM_BUG_ON(vma->vm_flags & VM_SHARED);
+	VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
 
 	set_vma_private_data(vma, get_vma_private_data(vma) | flags);
 }
@@ -353,7 +353,7 @@ static void decrement_hugepage_resv_vma(struct hstate *h,
 	if (vma->vm_flags & VM_NORESERVE)
 		return;
 
-	if (vma->vm_flags & VM_SHARED) {
+	if (vma->vm_flags & VM_MAYSHARE) {
 		/* Shared mappings always use reserves */
 		h->resv_huge_pages--;
 	} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
@@ -369,14 +369,14 @@ static void decrement_hugepage_resv_vma(struct hstate *h,
 void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
-	if (!(vma->vm_flags & VM_SHARED))
+	if (!(vma->vm_flags & VM_MAYSHARE))
 		vma->vm_private_data = (void *)0;
 }
 
 /* Returns true if the VMA has associated reserve pages */
 static int vma_has_reserves(struct vm_area_struct *vma)
 {
-	if (vma->vm_flags & VM_SHARED)
+	if (vma->vm_flags & VM_MAYSHARE)
 		return 1;
 	if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
 		return 1;
@@ -924,7 +924,7 @@ static long vma_needs_reservation(struct hstate *h,
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	struct inode *inode = mapping->host;
 
-	if (vma->vm_flags & VM_SHARED) {
+	if (vma->vm_flags & VM_MAYSHARE) {
 		pgoff_t idx = vma_hugecache_offset(h, vma, addr);
 		return region_chg(&inode->i_mapping->private_list,
 							idx, idx + 1);
@@ -949,7 +949,7 @@ static void vma_commit_reservation(struct hstate *h,
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	struct inode *inode = mapping->host;
 
-	if (vma->vm_flags & VM_SHARED) {
+	if (vma->vm_flags & VM_MAYSHARE) {
 		pgoff_t idx = vma_hugecache_offset(h, vma, addr);
 		region_add(&inode->i_mapping->private_list, idx, idx + 1);
 
@@ -1893,7 +1893,7 @@ retry_avoidcopy:
 	 * at the time of fork() could consume its reserves on COW instead
 	 * of the full address range.
 	 */
-	if (!(vma->vm_flags & VM_SHARED) &&
+	if (!(vma->vm_flags & VM_MAYSHARE) &&
 			is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
 			old_page != pagecache_page)
 		outside_reserve = 1;
@@ -2000,7 +2000,7 @@ retry:
 		clear_huge_page(page, address, huge_page_size(h));
 		__SetPageUptodate(page);
 
-		if (vma->vm_flags & VM_SHARED) {
+		if (vma->vm_flags & VM_MAYSHARE) {
 			int err;
 			struct inode *inode = mapping->host;
 
@@ -2104,7 +2104,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 			goto out_mutex;
 		}
 
-		if (!(vma->vm_flags & VM_SHARED))
+		if (!(vma->vm_flags & VM_MAYSHARE))
 			pagecache_page = hugetlbfs_pagecache_page(h,
 								vma, address);
 	}
@@ -2289,7 +2289,7 @@ int hugetlb_reserve_pages(struct inode *inode,
 	 * to reserve the full area even if read-only as mprotect() may be
 	 * called to make the mapping read-write. Assume !vma is a shm mapping
 	 */
-	if (!vma || vma->vm_flags & VM_SHARED)
+	if (!vma || vma->vm_flags & VM_MAYSHARE)
 		chg = region_chg(&inode->i_mapping->private_list, from, to);
 	else {
 		struct resv_map *resv_map = resv_map_alloc();
@@ -2330,7 +2330,7 @@ int hugetlb_reserve_pages(struct inode *inode,
 	 * consumed reservations are stored in the map. Hence, nothing
 	 * else has to be done for private mappings here
 	 */
-	if (!vma || vma->vm_flags & VM_SHARED)
+	if (!vma || vma->vm_flags & VM_MAYSHARE)
 		region_add(&inode->i_mapping->private_list, from, to);
 	return 0;
 }
diff --git a/mm/kmemleak-test.c b/mm/kmemleak-test.c
new file mode 100644
index 00000000000..d5292fc6f52
--- /dev/null
+++ b/mm/kmemleak-test.c
@@ -0,0 +1,111 @@
+/*
+ * mm/kmemleak-test.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/list.h>
+#include <linux/percpu.h>
+#include <linux/fdtable.h>
+
+#include <linux/kmemleak.h>
+
+struct test_node {
+	long header[25];
+	struct list_head list;
+	long footer[25];
+};
+
+static LIST_HEAD(test_list);
+static DEFINE_PER_CPU(void *, test_pointer);
+
+/*
+ * Some very simple testing. This function needs to be extended for
+ * proper testing.
+ */
+static int __init kmemleak_test_init(void)
+{
+	struct test_node *elem;
+	int i;
+
+	printk(KERN_INFO "Kmemleak testing\n");
+
+	/* make some orphan objects */
+	pr_info("kmemleak: kmalloc(32) = %p\n", kmalloc(32, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(32) = %p\n", kmalloc(32, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(1024) = %p\n", kmalloc(1024, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(1024) = %p\n", kmalloc(1024, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(2048) = %p\n", kmalloc(2048, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(2048) = %p\n", kmalloc(2048, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(4096) = %p\n", kmalloc(4096, GFP_KERNEL));
+	pr_info("kmemleak: kmalloc(4096) = %p\n", kmalloc(4096, GFP_KERNEL));
+#ifndef CONFIG_MODULES
+	pr_info("kmemleak: kmem_cache_alloc(files_cachep) = %p\n",
+		kmem_cache_alloc(files_cachep, GFP_KERNEL));
+	pr_info("kmemleak: kmem_cache_alloc(files_cachep) = %p\n",
+		kmem_cache_alloc(files_cachep, GFP_KERNEL));
+#endif
+	pr_info("kmemleak: vmalloc(64) = %p\n", vmalloc(64));
+	pr_info("kmemleak: vmalloc(64) = %p\n", vmalloc(64));
+	pr_info("kmemleak: vmalloc(64) = %p\n", vmalloc(64));
+	pr_info("kmemleak: vmalloc(64) = %p\n", vmalloc(64));
+	pr_info("kmemleak: vmalloc(64) = %p\n", vmalloc(64));
+
+	/*
+	 * Add elements to a list. They should only appear as orphan
+	 * after the module is removed.
+	 */
+	for (i = 0; i < 10; i++) {
+		elem = kmalloc(sizeof(*elem), GFP_KERNEL);
+		pr_info("kmemleak: kmalloc(sizeof(*elem)) = %p\n", elem);
+		if (!elem)
+			return -ENOMEM;
+		memset(elem, 0, sizeof(*elem));
+		INIT_LIST_HEAD(&elem->list);
+
+		list_add_tail(&elem->list, &test_list);
+	}
+
+	for_each_possible_cpu(i) {
+		per_cpu(test_pointer, i) = kmalloc(129, GFP_KERNEL);
+		pr_info("kmemleak: kmalloc(129) = %p\n",
+			per_cpu(test_pointer, i));
+	}
+
+	return 0;
+}
+module_init(kmemleak_test_init);
+
+static void __exit kmemleak_test_exit(void)
+{
+	struct test_node *elem, *tmp;
+
+	/*
+	 * Remove the list elements without actually freeing the
+	 * memory.
+	 */
+	list_for_each_entry_safe(elem, tmp, &test_list, list)
+		list_del(&elem->list);
+}
+module_exit(kmemleak_test_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
new file mode 100644
index 00000000000..58ec86c9e58
--- /dev/null
+++ b/mm/kmemleak.c
@@ -0,0 +1,1498 @@
+/*
+ * mm/kmemleak.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * For more information on the algorithm and kmemleak usage, please see
+ * Documentation/kmemleak.txt.
+ *
+ * Notes on locking
+ * ----------------
+ *
+ * The following locks and mutexes are used by kmemleak:
+ *
+ * - kmemleak_lock (rwlock): protects the object_list modifications and
+ *   accesses to the object_tree_root. The object_list is the main list
+ *   holding the metadata (struct kmemleak_object) for the allocated memory
+ *   blocks. The object_tree_root is a priority search tree used to look-up
+ *   metadata based on a pointer to the corresponding memory block.  The
+ *   kmemleak_object structures are added to the object_list and
+ *   object_tree_root in the create_object() function called from the
+ *   kmemleak_alloc() callback and removed in delete_object() called from the
+ *   kmemleak_free() callback
+ * - kmemleak_object.lock (spinlock): protects a kmemleak_object. Accesses to
+ *   the metadata (e.g. count) are protected by this lock. Note that some
+ *   members of this structure may be protected by other means (atomic or
+ *   kmemleak_lock). This lock is also held when scanning the corresponding
+ *   memory block to avoid the kernel freeing it via the kmemleak_free()
+ *   callback. This is less heavyweight than holding a global lock like
+ *   kmemleak_lock during scanning
+ * - scan_mutex (mutex): ensures that only one thread may scan the memory for
+ *   unreferenced objects at a time. The gray_list contains the objects which
+ *   are already referenced or marked as false positives and need to be
+ *   scanned. This list is only modified during a scanning episode when the
+ *   scan_mutex is held. At the end of a scan, the gray_list is always empty.
+ *   Note that the kmemleak_object.use_count is incremented when an object is
+ *   added to the gray_list and therefore cannot be freed
+ * - kmemleak_mutex (mutex): prevents multiple users of the "kmemleak" debugfs
+ *   file together with modifications to the memory scanning parameters
+ *   including the scan_thread pointer
+ *
+ * The kmemleak_object structures have a use_count incremented or decremented
+ * using the get_object()/put_object() functions. When the use_count becomes
+ * 0, this count can no longer be incremented and put_object() schedules the
+ * kmemleak_object freeing via an RCU callback. All calls to the get_object()
+ * function must be protected by rcu_read_lock() to avoid accessing a freed
+ * structure.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/prio_tree.h>
+#include <linux/gfp.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/cpumask.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/rcupdate.h>
+#include <linux/stacktrace.h>
+#include <linux/cache.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <linux/mmzone.h>
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <linux/string.h>
+#include <linux/nodemask.h>
+#include <linux/mm.h>
+
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+
+#include <linux/kmemleak.h>
+
+/*
+ * Kmemleak configuration and common defines.
+ */
+#define MAX_TRACE		16	/* stack trace length */
+#define REPORTS_NR		50	/* maximum number of reported leaks */
+#define MSECS_MIN_AGE		5000	/* minimum object age for reporting */
+#define MSECS_SCAN_YIELD	10	/* CPU yielding period */
+#define SECS_FIRST_SCAN		60	/* delay before the first scan */
+#define SECS_SCAN_WAIT		600	/* subsequent auto scanning delay */
+
+#define BYTES_PER_POINTER	sizeof(void *)
+
+/* scanning area inside a memory block */
+struct kmemleak_scan_area {
+	struct hlist_node node;
+	unsigned long offset;
+	size_t length;
+};
+
+/*
+ * Structure holding the metadata for each allocated memory block.
+ * Modifications to such objects should be made while holding the
+ * object->lock. Insertions or deletions from object_list, gray_list or
+ * tree_node are already protected by the corresponding locks or mutex (see
+ * the notes on locking above). These objects are reference-counted
+ * (use_count) and freed using the RCU mechanism.
+ */
+struct kmemleak_object {
+	spinlock_t lock;
+	unsigned long flags;		/* object status flags */
+	struct list_head object_list;
+	struct list_head gray_list;
+	struct prio_tree_node tree_node;
+	struct rcu_head rcu;		/* object_list lockless traversal */
+	/* object usage count; object freed when use_count == 0 */
+	atomic_t use_count;
+	unsigned long pointer;
+	size_t size;
+	/* minimum number of a pointers found before it is considered leak */
+	int min_count;
+	/* the total number of pointers found pointing to this object */
+	int count;
+	/* memory ranges to be scanned inside an object (empty for all) */
+	struct hlist_head area_list;
+	unsigned long trace[MAX_TRACE];
+	unsigned int trace_len;
+	unsigned long jiffies;		/* creation timestamp */
+	pid_t pid;			/* pid of the current task */
+	char comm[TASK_COMM_LEN];	/* executable name */
+};
+
+/* flag representing the memory block allocation status */
+#define OBJECT_ALLOCATED	(1 << 0)
+/* flag set after the first reporting of an unreference object */
+#define OBJECT_REPORTED		(1 << 1)
+/* flag set to not scan the object */
+#define OBJECT_NO_SCAN		(1 << 2)
+
+/* the list of all allocated objects */
+static LIST_HEAD(object_list);
+/* the list of gray-colored objects (see color_gray comment below) */
+static LIST_HEAD(gray_list);
+/* prio search tree for object boundaries */
+static struct prio_tree_root object_tree_root;
+/* rw_lock protecting the access to object_list and prio_tree_root */
+static DEFINE_RWLOCK(kmemleak_lock);
+
+/* allocation caches for kmemleak internal data */
+static struct kmem_cache *object_cache;
+static struct kmem_cache *scan_area_cache;
+
+/* set if tracing memory operations is enabled */
+static atomic_t kmemleak_enabled = ATOMIC_INIT(0);
+/* set in the late_initcall if there were no errors */
+static atomic_t kmemleak_initialized = ATOMIC_INIT(0);
+/* enables or disables early logging of the memory operations */
+static atomic_t kmemleak_early_log = ATOMIC_INIT(1);
+/* set if a fata kmemleak error has occurred */
+static atomic_t kmemleak_error = ATOMIC_INIT(0);
+
+/* minimum and maximum address that may be valid pointers */
+static unsigned long min_addr = ULONG_MAX;
+static unsigned long max_addr;
+
+/* used for yielding the CPU to other tasks during scanning */
+static unsigned long next_scan_yield;
+static struct task_struct *scan_thread;
+static unsigned long jiffies_scan_yield;
+static unsigned long jiffies_min_age;
+/* delay between automatic memory scannings */
+static signed long jiffies_scan_wait;
+/* enables or disables the task stacks scanning */
+static int kmemleak_stack_scan;
+/* mutex protecting the memory scanning */
+static DEFINE_MUTEX(scan_mutex);
+/* mutex protecting the access to the /sys/kernel/debug/kmemleak file */
+static DEFINE_MUTEX(kmemleak_mutex);
+
+/* number of leaks reported (for limitation purposes) */
+static int reported_leaks;
+
+/*
+ * Early object allocation/freeing logging. Kkmemleak is initialized after the
+ * kernel allocator. However, both the kernel allocator and kmemleak may
+ * allocate memory blocks which need to be tracked. Kkmemleak defines an
+ * arbitrary buffer to hold the allocation/freeing information before it is
+ * fully initialized.
+ */
+
+/* kmemleak operation type for early logging */
+enum {
+	KMEMLEAK_ALLOC,
+	KMEMLEAK_FREE,
+	KMEMLEAK_NOT_LEAK,
+	KMEMLEAK_IGNORE,
+	KMEMLEAK_SCAN_AREA,
+	KMEMLEAK_NO_SCAN
+};
+
+/*
+ * Structure holding the information passed to kmemleak callbacks during the
+ * early logging.
+ */
+struct early_log {
+	int op_type;			/* kmemleak operation type */
+	const void *ptr;		/* allocated/freed memory block */
+	size_t size;			/* memory block size */
+	int min_count;			/* minimum reference count */
+	unsigned long offset;		/* scan area offset */
+	size_t length;			/* scan area length */
+};
+
+/* early logging buffer and current position */
+static struct early_log early_log[200];
+static int crt_early_log;
+
+static void kmemleak_disable(void);
+
+/*
+ * Print a warning and dump the stack trace.
+ */
+#define kmemleak_warn(x...)	do {	\
+	pr_warning(x);			\
+	dump_stack();			\
+} while (0)
+
+/*
+ * Macro invoked when a serious kmemleak condition occured and cannot be
+ * recovered from. Kkmemleak will be disabled and further allocation/freeing
+ * tracing no longer available.
+ */
+#define kmemleak_panic(x...)	do {	\
+	kmemleak_warn(x);		\
+	kmemleak_disable();		\
+} while (0)
+
+/*
+ * Object colors, encoded with count and min_count:
+ * - white - orphan object, not enough references to it (count < min_count)
+ * - gray  - not orphan, not marked as false positive (min_count == 0) or
+ *		sufficient references to it (count >= min_count)
+ * - black - ignore, it doesn't contain references (e.g. text section)
+ *		(min_count == -1). No function defined for this color.
+ * Newly created objects don't have any color assigned (object->count == -1)
+ * before the next memory scan when they become white.
+ */
+static int color_white(const struct kmemleak_object *object)
+{
+	return object->count != -1 && object->count < object->min_count;
+}
+
+static int color_gray(const struct kmemleak_object *object)
+{
+	return object->min_count != -1 && object->count >= object->min_count;
+}
+
+/*
+ * Objects are considered referenced if their color is gray and they have not
+ * been deleted.
+ */
+static int referenced_object(struct kmemleak_object *object)
+{
+	return (object->flags & OBJECT_ALLOCATED) && color_gray(object);
+}
+
+/*
+ * Objects are considered unreferenced only if their color is white, they have
+ * not be deleted and have a minimum age to avoid false positives caused by
+ * pointers temporarily stored in CPU registers.
+ */
+static int unreferenced_object(struct kmemleak_object *object)
+{
+	return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
+		time_is_before_eq_jiffies(object->jiffies + jiffies_min_age);
+}
+
+/*
+ * Printing of the (un)referenced objects information, either to the seq file
+ * or to the kernel log. The print_referenced/print_unreferenced functions
+ * must be called with the object->lock held.
+ */
+#define print_helper(seq, x...)	do {	\
+	struct seq_file *s = (seq);	\
+	if (s)				\
+		seq_printf(s, x);	\
+	else				\
+		pr_info(x);		\
+} while (0)
+
+static void print_referenced(struct kmemleak_object *object)
+{
+	pr_info("kmemleak: referenced object 0x%08lx (size %zu)\n",
+		object->pointer, object->size);
+}
+
+static void print_unreferenced(struct seq_file *seq,
+			       struct kmemleak_object *object)
+{
+	int i;
+
+	print_helper(seq, "kmemleak: unreferenced object 0x%08lx (size %zu):\n",
+		     object->pointer, object->size);
+	print_helper(seq, "  comm \"%s\", pid %d, jiffies %lu\n",
+		     object->comm, object->pid, object->jiffies);
+	print_helper(seq, "  backtrace:\n");
+
+	for (i = 0; i < object->trace_len; i++) {
+		void *ptr = (void *)object->trace[i];
+		print_helper(seq, "    [<%p>] %pS\n", ptr, ptr);
+	}
+}
+
+/*
+ * Print the kmemleak_object information. This function is used mainly for
+ * debugging special cases when kmemleak operations. It must be called with
+ * the object->lock held.
+ */
+static void dump_object_info(struct kmemleak_object *object)
+{
+	struct stack_trace trace;
+
+	trace.nr_entries = object->trace_len;
+	trace.entries = object->trace;
+
+	pr_notice("kmemleak: Object 0x%08lx (size %zu):\n",
+		  object->tree_node.start, object->size);
+	pr_notice("  comm \"%s\", pid %d, jiffies %lu\n",
+		  object->comm, object->pid, object->jiffies);
+	pr_notice("  min_count = %d\n", object->min_count);
+	pr_notice("  count = %d\n", object->count);
+	pr_notice("  backtrace:\n");
+	print_stack_trace(&trace, 4);
+}
+
+/*
+ * Look-up a memory block metadata (kmemleak_object) in the priority search
+ * tree based on a pointer value. If alias is 0, only values pointing to the
+ * beginning of the memory block are allowed. The kmemleak_lock must be held
+ * when calling this function.
+ */
+static struct kmemleak_object *lookup_object(unsigned long ptr, int alias)
+{
+	struct prio_tree_node *node;
+	struct prio_tree_iter iter;
+	struct kmemleak_object *object;
+
+	prio_tree_iter_init(&iter, &object_tree_root, ptr, ptr);
+	node = prio_tree_next(&iter);
+	if (node) {
+		object = prio_tree_entry(node, struct kmemleak_object,
+					 tree_node);
+		if (!alias && object->pointer != ptr) {
+			kmemleak_warn("kmemleak: Found object by alias");
+			object = NULL;
+		}
+	} else
+		object = NULL;
+
+	return object;
+}
+
+/*
+ * Increment the object use_count. Return 1 if successful or 0 otherwise. Note
+ * that once an object's use_count reached 0, the RCU freeing was already
+ * registered and the object should no longer be used. This function must be
+ * called under the protection of rcu_read_lock().
+ */
+static int get_object(struct kmemleak_object *object)
+{
+	return atomic_inc_not_zero(&object->use_count);
+}
+
+/*
+ * RCU callback to free a kmemleak_object.
+ */
+static void free_object_rcu(struct rcu_head *rcu)
+{
+	struct hlist_node *elem, *tmp;
+	struct kmemleak_scan_area *area;
+	struct kmemleak_object *object =
+		container_of(rcu, struct kmemleak_object, rcu);
+
+	/*
+	 * Once use_count is 0 (guaranteed by put_object), there is no other
+	 * code accessing this object, hence no need for locking.
+	 */
+	hlist_for_each_entry_safe(area, elem, tmp, &object->area_list, node) {
+		hlist_del(elem);
+		kmem_cache_free(scan_area_cache, area);
+	}
+	kmem_cache_free(object_cache, object);
+}
+
+/*
+ * Decrement the object use_count. Once the count is 0, free the object using
+ * an RCU callback. Since put_object() may be called via the kmemleak_free() ->
+ * delete_object() path, the delayed RCU freeing ensures that there is no
+ * recursive call to the kernel allocator. Lock-less RCU object_list traversal
+ * is also possible.
+ */
+static void put_object(struct kmemleak_object *object)
+{
+	if (!atomic_dec_and_test(&object->use_count))
+		return;
+
+	/* should only get here after delete_object was called */
+	WARN_ON(object->flags & OBJECT_ALLOCATED);
+
+	call_rcu(&object->rcu, free_object_rcu);
+}
+
+/*
+ * Look up an object in the prio search tree and increase its use_count.
+ */
+static struct kmemleak_object *find_and_get_object(unsigned long ptr, int alias)
+{
+	unsigned long flags;
+	struct kmemleak_object *object = NULL;
+
+	rcu_read_lock();
+	read_lock_irqsave(&kmemleak_lock, flags);
+	if (ptr >= min_addr && ptr < max_addr)
+		object = lookup_object(ptr, alias);
+	read_unlock_irqrestore(&kmemleak_lock, flags);
+
+	/* check whether the object is still available */
+	if (object && !get_object(object))
+		object = NULL;
+	rcu_read_unlock();
+
+	return object;
+}
+
+/*
+ * Create the metadata (struct kmemleak_object) corresponding to an allocated
+ * memory block and add it to the object_list and object_tree_root.
+ */
+static void create_object(unsigned long ptr, size_t size, int min_count,
+			  gfp_t gfp)
+{
+	unsigned long flags;
+	struct kmemleak_object *object;
+	struct prio_tree_node *node;
+	struct stack_trace trace;
+
+	object = kmem_cache_alloc(object_cache, gfp & ~GFP_SLAB_BUG_MASK);
+	if (!object) {
+		kmemleak_panic("kmemleak: Cannot allocate a kmemleak_object "
+			       "structure\n");
+		return;
+	}
+
+	INIT_LIST_HEAD(&object->object_list);
+	INIT_LIST_HEAD(&object->gray_list);
+	INIT_HLIST_HEAD(&object->area_list);
+	spin_lock_init(&object->lock);
+	atomic_set(&object->use_count, 1);
+	object->flags = OBJECT_ALLOCATED;
+	object->pointer = ptr;
+	object->size = size;
+	object->min_count = min_count;
+	object->count = -1;			/* no color initially */
+	object->jiffies = jiffies;
+
+	/* task information */
+	if (in_irq()) {
+		object->pid = 0;
+		strncpy(object->comm, "hardirq", sizeof(object->comm));
+	} else if (in_softirq()) {
+		object->pid = 0;
+		strncpy(object->comm, "softirq", sizeof(object->comm));
+	} else {
+		object->pid = current->pid;
+		/*
+		 * There is a small chance of a race with set_task_comm(),
+		 * however using get_task_comm() here may cause locking
+		 * dependency issues with current->alloc_lock. In the worst
+		 * case, the command line is not correct.
+		 */
+		strncpy(object->comm, current->comm, sizeof(object->comm));
+	}
+
+	/* kernel backtrace */
+	trace.max_entries = MAX_TRACE;
+	trace.nr_entries = 0;
+	trace.entries = object->trace;
+	trace.skip = 1;
+	save_stack_trace(&trace);
+	object->trace_len = trace.nr_entries;
+
+	INIT_PRIO_TREE_NODE(&object->tree_node);
+	object->tree_node.start = ptr;
+	object->tree_node.last = ptr + size - 1;
+
+	write_lock_irqsave(&kmemleak_lock, flags);
+	min_addr = min(min_addr, ptr);
+	max_addr = max(max_addr, ptr + size);
+	node = prio_tree_insert(&object_tree_root, &object->tree_node);
+	/*
+	 * The code calling the kernel does not yet have the pointer to the
+	 * memory block to be able to free it.  However, we still hold the
+	 * kmemleak_lock here in case parts of the kernel started freeing
+	 * random memory blocks.
+	 */
+	if (node != &object->tree_node) {
+		unsigned long flags;
+
+		kmemleak_panic("kmemleak: Cannot insert 0x%lx into the object "
+			       "search tree (already existing)\n", ptr);
+		object = lookup_object(ptr, 1);
+		spin_lock_irqsave(&object->lock, flags);
+		dump_object_info(object);
+		spin_unlock_irqrestore(&object->lock, flags);
+
+		goto out;
+	}
+	list_add_tail_rcu(&object->object_list, &object_list);
+out:
+	write_unlock_irqrestore(&kmemleak_lock, flags);
+}
+
+/*
+ * Remove the metadata (struct kmemleak_object) for a memory block from the
+ * object_list and object_tree_root and decrement its use_count.
+ */
+static void delete_object(unsigned long ptr)
+{
+	unsigned long flags;
+	struct kmemleak_object *object;
+
+	write_lock_irqsave(&kmemleak_lock, flags);
+	object = lookup_object(ptr, 0);
+	if (!object) {
+		kmemleak_warn("kmemleak: Freeing unknown object at 0x%08lx\n",
+			      ptr);
+		write_unlock_irqrestore(&kmemleak_lock, flags);
+		return;
+	}
+	prio_tree_remove(&object_tree_root, &object->tree_node);
+	list_del_rcu(&object->object_list);
+	write_unlock_irqrestore(&kmemleak_lock, flags);
+
+	WARN_ON(!(object->flags & OBJECT_ALLOCATED));
+	WARN_ON(atomic_read(&object->use_count) < 1);
+
+	/*
+	 * Locking here also ensures that the corresponding memory block
+	 * cannot be freed when it is being scanned.
+	 */
+	spin_lock_irqsave(&object->lock, flags);
+	if (object->flags & OBJECT_REPORTED)
+		print_referenced(object);
+	object->flags &= ~OBJECT_ALLOCATED;
+	spin_unlock_irqrestore(&object->lock, flags);
+	put_object(object);
+}
+
+/*
+ * Make a object permanently as gray-colored so that it can no longer be
+ * reported as a leak. This is used in general to mark a false positive.
+ */
+static void make_gray_object(unsigned long ptr)
+{
+	unsigned long flags;
+	struct kmemleak_object *object;
+
+	object = find_and_get_object(ptr, 0);
+	if (!object) {
+		kmemleak_warn("kmemleak: Graying unknown object at 0x%08lx\n",
+			      ptr);
+		return;
+	}
+
+	spin_lock_irqsave(&object->lock, flags);
+	object->min_count = 0;
+	spin_unlock_irqrestore(&object->lock, flags);
+	put_object(object);
+}
+
+/*
+ * Mark the object as black-colored so that it is ignored from scans and
+ * reporting.
+ */
+static void make_black_object(unsigned long ptr)
+{
+	unsigned long flags;
+	struct kmemleak_object *object;
+
+	object = find_and_get_object(ptr, 0);
+	if (!object) {
+		kmemleak_warn("kmemleak: Blacking unknown object at 0x%08lx\n",
+			      ptr);
+		return;
+	}
+
+	spin_lock_irqsave(&object->lock, flags);
+	object->min_count = -1;
+	spin_unlock_irqrestore(&object->lock, flags);
+	put_object(object);
+}
+
+/*
+ * Add a scanning area to the object. If at least one such area is added,
+ * kmemleak will only scan these ranges rather than the whole memory block.
+ */
+static void add_scan_area(unsigned long ptr, unsigned long offset,
+			  size_t length, gfp_t gfp)
+{
+	unsigned long flags;
+	struct kmemleak_object *object;
+	struct kmemleak_scan_area *area;
+
+	object = find_and_get_object(ptr, 0);
+	if (!object) {
+		kmemleak_warn("kmemleak: Adding scan area to unknown "
+			      "object at 0x%08lx\n", ptr);
+		return;
+	}
+
+	area = kmem_cache_alloc(scan_area_cache, gfp & ~GFP_SLAB_BUG_MASK);
+	if (!area) {
+		kmemleak_warn("kmemleak: Cannot allocate a scan area\n");
+		goto out;
+	}
+
+	spin_lock_irqsave(&object->lock, flags);
+	if (offset + length > object->size) {
+		kmemleak_warn("kmemleak: Scan area larger than object "
+			      "0x%08lx\n", ptr);
+		dump_object_info(object);
+		kmem_cache_free(scan_area_cache, area);
+		goto out_unlock;
+	}
+
+	INIT_HLIST_NODE(&area->node);
+	area->offset = offset;
+	area->length = length;
+
+	hlist_add_head(&area->node, &object->area_list);
+out_unlock:
+	spin_unlock_irqrestore(&object->lock, flags);
+out:
+	put_object(object);
+}
+
+/*
+ * Set the OBJECT_NO_SCAN flag for the object corresponding to the give
+ * pointer. Such object will not be scanned by kmemleak but references to it
+ * are searched.
+ */
+static void object_no_scan(unsigned long ptr)
+{
+	unsigned long flags;
+	struct kmemleak_object *object;
+
+	object = find_and_get_object(ptr, 0);
+	if (!object) {
+		kmemleak_warn("kmemleak: Not scanning unknown object at "
+			      "0x%08lx\n", ptr);
+		return;
+	}
+
+	spin_lock_irqsave(&object->lock, flags);
+	object->flags |= OBJECT_NO_SCAN;
+	spin_unlock_irqrestore(&object->lock, flags);
+	put_object(object);
+}
+
+/*
+ * Log an early kmemleak_* call to the early_log buffer. These calls will be
+ * processed later once kmemleak is fully initialized.
+ */
+static void log_early(int op_type, const void *ptr, size_t size,
+		      int min_count, unsigned long offset, size_t length)
+{
+	unsigned long flags;
+	struct early_log *log;
+
+	if (crt_early_log >= ARRAY_SIZE(early_log)) {
+		kmemleak_panic("kmemleak: Early log buffer exceeded\n");
+		return;
+	}
+
+	/*
+	 * There is no need for locking since the kernel is still in UP mode
+	 * at this stage. Disabling the IRQs is enough.
+	 */
+	local_irq_save(flags);
+	log = &early_log[crt_early_log];
+	log->op_type = op_type;
+	log->ptr = ptr;
+	log->size = size;
+	log->min_count = min_count;
+	log->offset = offset;
+	log->length = length;
+	crt_early_log++;
+	local_irq_restore(flags);
+}
+
+/*
+ * Memory allocation function callback. This function is called from the
+ * kernel allocators when a new block is allocated (kmem_cache_alloc, kmalloc,
+ * vmalloc etc.).
+ */
+void kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp)
+{
+	pr_debug("%s(0x%p, %zu, %d)\n", __func__, ptr, size, min_count);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		create_object((unsigned long)ptr, size, min_count, gfp);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_ALLOC, ptr, size, min_count, 0, 0);
+}
+EXPORT_SYMBOL_GPL(kmemleak_alloc);
+
+/*
+ * Memory freeing function callback. This function is called from the kernel
+ * allocators when a block is freed (kmem_cache_free, kfree, vfree etc.).
+ */
+void kmemleak_free(const void *ptr)
+{
+	pr_debug("%s(0x%p)\n", __func__, ptr);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		delete_object((unsigned long)ptr);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(kmemleak_free);
+
+/*
+ * Mark an already allocated memory block as a false positive. This will cause
+ * the block to no longer be reported as leak and always be scanned.
+ */
+void kmemleak_not_leak(const void *ptr)
+{
+	pr_debug("%s(0x%p)\n", __func__, ptr);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		make_gray_object((unsigned long)ptr);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_NOT_LEAK, ptr, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(kmemleak_not_leak);
+
+/*
+ * Ignore a memory block. This is usually done when it is known that the
+ * corresponding block is not a leak and does not contain any references to
+ * other allocated memory blocks.
+ */
+void kmemleak_ignore(const void *ptr)
+{
+	pr_debug("%s(0x%p)\n", __func__, ptr);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		make_black_object((unsigned long)ptr);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_IGNORE, ptr, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(kmemleak_ignore);
+
+/*
+ * Limit the range to be scanned in an allocated memory block.
+ */
+void kmemleak_scan_area(const void *ptr, unsigned long offset, size_t length,
+			gfp_t gfp)
+{
+	pr_debug("%s(0x%p)\n", __func__, ptr);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		add_scan_area((unsigned long)ptr, offset, length, gfp);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_SCAN_AREA, ptr, 0, 0, offset, length);
+}
+EXPORT_SYMBOL(kmemleak_scan_area);
+
+/*
+ * Inform kmemleak not to scan the given memory block.
+ */
+void kmemleak_no_scan(const void *ptr)
+{
+	pr_debug("%s(0x%p)\n", __func__, ptr);
+
+	if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+		object_no_scan((unsigned long)ptr);
+	else if (atomic_read(&kmemleak_early_log))
+		log_early(KMEMLEAK_NO_SCAN, ptr, 0, 0, 0, 0);
+}
+EXPORT_SYMBOL(kmemleak_no_scan);
+
+/*
+ * Yield the CPU so that other tasks get a chance to run.  The yielding is
+ * rate-limited to avoid excessive number of calls to the schedule() function
+ * during memory scanning.
+ */
+static void scan_yield(void)
+{
+	might_sleep();
+
+	if (time_is_before_eq_jiffies(next_scan_yield)) {
+		schedule();
+		next_scan_yield = jiffies + jiffies_scan_yield;
+	}
+}
+
+/*
+ * Memory scanning is a long process and it needs to be interruptable. This
+ * function checks whether such interrupt condition occured.
+ */
+static int scan_should_stop(void)
+{
+	if (!atomic_read(&kmemleak_enabled))
+		return 1;
+
+	/*
+	 * This function may be called from either process or kthread context,
+	 * hence the need to check for both stop conditions.
+	 */
+	if (current->mm)
+		return signal_pending(current);
+	else
+		return kthread_should_stop();
+
+	return 0;
+}
+
+/*
+ * Scan a memory block (exclusive range) for valid pointers and add those
+ * found to the gray list.
+ */
+static void scan_block(void *_start, void *_end,
+		       struct kmemleak_object *scanned)
+{
+	unsigned long *ptr;
+	unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER);
+	unsigned long *end = _end - (BYTES_PER_POINTER - 1);
+
+	for (ptr = start; ptr < end; ptr++) {
+		unsigned long flags;
+		unsigned long pointer = *ptr;
+		struct kmemleak_object *object;
+
+		if (scan_should_stop())
+			break;
+
+		/*
+		 * When scanning a memory block with a corresponding
+		 * kmemleak_object, the CPU yielding is handled in the calling
+		 * code since it holds the object->lock to avoid the block
+		 * freeing.
+		 */
+		if (!scanned)
+			scan_yield();
+
+		object = find_and_get_object(pointer, 1);
+		if (!object)
+			continue;
+		if (object == scanned) {
+			/* self referenced, ignore */
+			put_object(object);
+			continue;
+		}
+
+		/*
+		 * Avoid the lockdep recursive warning on object->lock being
+		 * previously acquired in scan_object(). These locks are
+		 * enclosed by scan_mutex.
+		 */
+		spin_lock_irqsave_nested(&object->lock, flags,
+					 SINGLE_DEPTH_NESTING);
+		if (!color_white(object)) {
+			/* non-orphan, ignored or new */
+			spin_unlock_irqrestore(&object->lock, flags);
+			put_object(object);
+			continue;
+		}
+
+		/*
+		 * Increase the object's reference count (number of pointers
+		 * to the memory block). If this count reaches the required
+		 * minimum, the object's color will become gray and it will be
+		 * added to the gray_list.
+		 */
+		object->count++;
+		if (color_gray(object))
+			list_add_tail(&object->gray_list, &gray_list);
+		else
+			put_object(object);
+		spin_unlock_irqrestore(&object->lock, flags);
+	}
+}
+
+/*
+ * Scan a memory block corresponding to a kmemleak_object. A condition is
+ * that object->use_count >= 1.
+ */
+static void scan_object(struct kmemleak_object *object)
+{
+	struct kmemleak_scan_area *area;
+	struct hlist_node *elem;
+	unsigned long flags;
+
+	/*
+	 * Once the object->lock is aquired, the corresponding memory block
+	 * cannot be freed (the same lock is aquired in delete_object).
+	 */
+	spin_lock_irqsave(&object->lock, flags);
+	if (object->flags & OBJECT_NO_SCAN)
+		goto out;
+	if (!(object->flags & OBJECT_ALLOCATED))
+		/* already freed object */
+		goto out;
+	if (hlist_empty(&object->area_list))
+		scan_block((void *)object->pointer,
+			   (void *)(object->pointer + object->size), object);
+	else
+		hlist_for_each_entry(area, elem, &object->area_list, node)
+			scan_block((void *)(object->pointer + area->offset),
+				   (void *)(object->pointer + area->offset
+					    + area->length), object);
+out:
+	spin_unlock_irqrestore(&object->lock, flags);
+}
+
+/*
+ * Scan data sections and all the referenced memory blocks allocated via the
+ * kernel's standard allocators. This function must be called with the
+ * scan_mutex held.
+ */
+static void kmemleak_scan(void)
+{
+	unsigned long flags;
+	struct kmemleak_object *object, *tmp;
+	struct task_struct *task;
+	int i;
+
+	/* prepare the kmemleak_object's */
+	rcu_read_lock();
+	list_for_each_entry_rcu(object, &object_list, object_list) {
+		spin_lock_irqsave(&object->lock, flags);
+#ifdef DEBUG
+		/*
+		 * With a few exceptions there should be a maximum of
+		 * 1 reference to any object at this point.
+		 */
+		if (atomic_read(&object->use_count) > 1) {
+			pr_debug("kmemleak: object->use_count = %d\n",
+				 atomic_read(&object->use_count));
+			dump_object_info(object);
+		}
+#endif
+		/* reset the reference count (whiten the object) */
+		object->count = 0;
+		if (color_gray(object) && get_object(object))
+			list_add_tail(&object->gray_list, &gray_list);
+
+		spin_unlock_irqrestore(&object->lock, flags);
+	}
+	rcu_read_unlock();
+
+	/* data/bss scanning */
+	scan_block(_sdata, _edata, NULL);
+	scan_block(__bss_start, __bss_stop, NULL);
+
+#ifdef CONFIG_SMP
+	/* per-cpu sections scanning */
+	for_each_possible_cpu(i)
+		scan_block(__per_cpu_start + per_cpu_offset(i),
+			   __per_cpu_end + per_cpu_offset(i), NULL);
+#endif
+
+	/*
+	 * Struct page scanning for each node. The code below is not yet safe
+	 * with MEMORY_HOTPLUG.
+	 */
+	for_each_online_node(i) {
+		pg_data_t *pgdat = NODE_DATA(i);
+		unsigned long start_pfn = pgdat->node_start_pfn;
+		unsigned long end_pfn = start_pfn + pgdat->node_spanned_pages;
+		unsigned long pfn;
+
+		for (pfn = start_pfn; pfn < end_pfn; pfn++) {
+			struct page *page;
+
+			if (!pfn_valid(pfn))
+				continue;
+			page = pfn_to_page(pfn);
+			/* only scan if page is in use */
+			if (page_count(page) == 0)
+				continue;
+			scan_block(page, page + 1, NULL);
+		}
+	}
+
+	/*
+	 * Scanning the task stacks may introduce false negatives and it is
+	 * not enabled by default.
+	 */
+	if (kmemleak_stack_scan) {
+		read_lock(&tasklist_lock);
+		for_each_process(task)
+			scan_block(task_stack_page(task),
+				   task_stack_page(task) + THREAD_SIZE, NULL);
+		read_unlock(&tasklist_lock);
+	}
+
+	/*
+	 * Scan the objects already referenced from the sections scanned
+	 * above. More objects will be referenced and, if there are no memory
+	 * leaks, all the objects will be scanned. The list traversal is safe
+	 * for both tail additions and removals from inside the loop. The
+	 * kmemleak objects cannot be freed from outside the loop because their
+	 * use_count was increased.
+	 */
+	object = list_entry(gray_list.next, typeof(*object), gray_list);
+	while (&object->gray_list != &gray_list) {
+		scan_yield();
+
+		/* may add new objects to the list */
+		if (!scan_should_stop())
+			scan_object(object);
+
+		tmp = list_entry(object->gray_list.next, typeof(*object),
+				 gray_list);
+
+		/* remove the object from the list and release it */
+		list_del(&object->gray_list);
+		put_object(object);
+
+		object = tmp;
+	}
+	WARN_ON(!list_empty(&gray_list));
+}
+
+/*
+ * Thread function performing automatic memory scanning. Unreferenced objects
+ * at the end of a memory scan are reported but only the first time.
+ */
+static int kmemleak_scan_thread(void *arg)
+{
+	static int first_run = 1;
+
+	pr_info("kmemleak: Automatic memory scanning thread started\n");
+
+	/*
+	 * Wait before the first scan to allow the system to fully initialize.
+	 */
+	if (first_run) {
+		first_run = 0;
+		ssleep(SECS_FIRST_SCAN);
+	}
+
+	while (!kthread_should_stop()) {
+		struct kmemleak_object *object;
+		signed long timeout = jiffies_scan_wait;
+
+		mutex_lock(&scan_mutex);
+
+		kmemleak_scan();
+		reported_leaks = 0;
+
+		rcu_read_lock();
+		list_for_each_entry_rcu(object, &object_list, object_list) {
+			unsigned long flags;
+
+			if (reported_leaks >= REPORTS_NR)
+				break;
+			spin_lock_irqsave(&object->lock, flags);
+			if (!(object->flags & OBJECT_REPORTED) &&
+			    unreferenced_object(object)) {
+				print_unreferenced(NULL, object);
+				object->flags |= OBJECT_REPORTED;
+				reported_leaks++;
+			} else if ((object->flags & OBJECT_REPORTED) &&
+				   referenced_object(object)) {
+				print_referenced(object);
+				object->flags &= ~OBJECT_REPORTED;
+			}
+			spin_unlock_irqrestore(&object->lock, flags);
+		}
+		rcu_read_unlock();
+
+		mutex_unlock(&scan_mutex);
+		/* wait before the next scan */
+		while (timeout && !kthread_should_stop())
+			timeout = schedule_timeout_interruptible(timeout);
+	}
+
+	pr_info("kmemleak: Automatic memory scanning thread ended\n");
+
+	return 0;
+}
+
+/*
+ * Start the automatic memory scanning thread. This function must be called
+ * with the kmemleak_mutex held.
+ */
+void start_scan_thread(void)
+{
+	if (scan_thread)
+		return;
+	scan_thread = kthread_run(kmemleak_scan_thread, NULL, "kmemleak");
+	if (IS_ERR(scan_thread)) {
+		pr_warning("kmemleak: Failed to create the scan thread\n");
+		scan_thread = NULL;
+	}
+}
+
+/*
+ * Stop the automatic memory scanning thread. This function must be called
+ * with the kmemleak_mutex held.
+ */
+void stop_scan_thread(void)
+{
+	if (scan_thread) {
+		kthread_stop(scan_thread);
+		scan_thread = NULL;
+	}
+}
+
+/*
+ * Iterate over the object_list and return the first valid object at or after
+ * the required position with its use_count incremented. The function triggers
+ * a memory scanning when the pos argument points to the first position.
+ */
+static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct kmemleak_object *object;
+	loff_t n = *pos;
+
+	if (!n) {
+		kmemleak_scan();
+		reported_leaks = 0;
+	}
+	if (reported_leaks >= REPORTS_NR)
+		return NULL;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(object, &object_list, object_list) {
+		if (n-- > 0)
+			continue;
+		if (get_object(object))
+			goto out;
+	}
+	object = NULL;
+out:
+	rcu_read_unlock();
+	return object;
+}
+
+/*
+ * Return the next object in the object_list. The function decrements the
+ * use_count of the previous object and increases that of the next one.
+ */
+static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct kmemleak_object *prev_obj = v;
+	struct kmemleak_object *next_obj = NULL;
+	struct list_head *n = &prev_obj->object_list;
+
+	++(*pos);
+	if (reported_leaks >= REPORTS_NR)
+		goto out;
+
+	rcu_read_lock();
+	list_for_each_continue_rcu(n, &object_list) {
+		next_obj = list_entry(n, struct kmemleak_object, object_list);
+		if (get_object(next_obj))
+			break;
+	}
+	rcu_read_unlock();
+out:
+	put_object(prev_obj);
+	return next_obj;
+}
+
+/*
+ * Decrement the use_count of the last object required, if any.
+ */
+static void kmemleak_seq_stop(struct seq_file *seq, void *v)
+{
+	if (v)
+		put_object(v);
+}
+
+/*
+ * Print the information for an unreferenced object to the seq file.
+ */
+static int kmemleak_seq_show(struct seq_file *seq, void *v)
+{
+	struct kmemleak_object *object = v;
+	unsigned long flags;
+
+	spin_lock_irqsave(&object->lock, flags);
+	if (!unreferenced_object(object))
+		goto out;
+	print_unreferenced(seq, object);
+	reported_leaks++;
+out:
+	spin_unlock_irqrestore(&object->lock, flags);
+	return 0;
+}
+
+static const struct seq_operations kmemleak_seq_ops = {
+	.start = kmemleak_seq_start,
+	.next  = kmemleak_seq_next,
+	.stop  = kmemleak_seq_stop,
+	.show  = kmemleak_seq_show,
+};
+
+static int kmemleak_open(struct inode *inode, struct file *file)
+{
+	int ret = 0;
+
+	if (!atomic_read(&kmemleak_enabled))
+		return -EBUSY;
+
+	ret = mutex_lock_interruptible(&kmemleak_mutex);
+	if (ret < 0)
+		goto out;
+	if (file->f_mode & FMODE_READ) {
+		ret = mutex_lock_interruptible(&scan_mutex);
+		if (ret < 0)
+			goto kmemleak_unlock;
+		ret = seq_open(file, &kmemleak_seq_ops);
+		if (ret < 0)
+			goto scan_unlock;
+	}
+	return ret;
+
+scan_unlock:
+	mutex_unlock(&scan_mutex);
+kmemleak_unlock:
+	mutex_unlock(&kmemleak_mutex);
+out:
+	return ret;
+}
+
+static int kmemleak_release(struct inode *inode, struct file *file)
+{
+	int ret = 0;
+
+	if (file->f_mode & FMODE_READ) {
+		seq_release(inode, file);
+		mutex_unlock(&scan_mutex);
+	}
+	mutex_unlock(&kmemleak_mutex);
+
+	return ret;
+}
+
+/*
+ * File write operation to configure kmemleak at run-time. The following
+ * commands can be written to the /sys/kernel/debug/kmemleak file:
+ *   off	- disable kmemleak (irreversible)
+ *   stack=on	- enable the task stacks scanning
+ *   stack=off	- disable the tasks stacks scanning
+ *   scan=on	- start the automatic memory scanning thread
+ *   scan=off	- stop the automatic memory scanning thread
+ *   scan=...	- set the automatic memory scanning period in seconds (0 to
+ *		  disable it)
+ */
+static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
+			      size_t size, loff_t *ppos)
+{
+	char buf[64];
+	int buf_size;
+
+	if (!atomic_read(&kmemleak_enabled))
+		return -EBUSY;
+
+	buf_size = min(size, (sizeof(buf) - 1));
+	if (strncpy_from_user(buf, user_buf, buf_size) < 0)
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	if (strncmp(buf, "off", 3) == 0)
+		kmemleak_disable();
+	else if (strncmp(buf, "stack=on", 8) == 0)
+		kmemleak_stack_scan = 1;
+	else if (strncmp(buf, "stack=off", 9) == 0)
+		kmemleak_stack_scan = 0;
+	else if (strncmp(buf, "scan=on", 7) == 0)
+		start_scan_thread();
+	else if (strncmp(buf, "scan=off", 8) == 0)
+		stop_scan_thread();
+	else if (strncmp(buf, "scan=", 5) == 0) {
+		unsigned long secs;
+		int err;
+
+		err = strict_strtoul(buf + 5, 0, &secs);
+		if (err < 0)
+			return err;
+		stop_scan_thread();
+		if (secs) {
+			jiffies_scan_wait = msecs_to_jiffies(secs * 1000);
+			start_scan_thread();
+		}
+	} else
+		return -EINVAL;
+
+	/* ignore the rest of the buffer, only one command at a time */
+	*ppos += size;
+	return size;
+}
+
+static const struct file_operations kmemleak_fops = {
+	.owner		= THIS_MODULE,
+	.open		= kmemleak_open,
+	.read		= seq_read,
+	.write		= kmemleak_write,
+	.llseek		= seq_lseek,
+	.release	= kmemleak_release,
+};
+
+/*
+ * Perform the freeing of the kmemleak internal objects after waiting for any
+ * current memory scan to complete.
+ */
+static int kmemleak_cleanup_thread(void *arg)
+{
+	struct kmemleak_object *object;
+
+	mutex_lock(&kmemleak_mutex);
+	stop_scan_thread();
+	mutex_unlock(&kmemleak_mutex);
+
+	mutex_lock(&scan_mutex);
+	rcu_read_lock();
+	list_for_each_entry_rcu(object, &object_list, object_list)
+		delete_object(object->pointer);
+	rcu_read_unlock();
+	mutex_unlock(&scan_mutex);
+
+	return 0;
+}
+
+/*
+ * Start the clean-up thread.
+ */
+static void kmemleak_cleanup(void)
+{
+	struct task_struct *cleanup_thread;
+
+	cleanup_thread = kthread_run(kmemleak_cleanup_thread, NULL,
+				     "kmemleak-clean");
+	if (IS_ERR(cleanup_thread))
+		pr_warning("kmemleak: Failed to create the clean-up thread\n");
+}
+
+/*
+ * Disable kmemleak. No memory allocation/freeing will be traced once this
+ * function is called. Disabling kmemleak is an irreversible operation.
+ */
+static void kmemleak_disable(void)
+{
+	/* atomically check whether it was already invoked */
+	if (atomic_cmpxchg(&kmemleak_error, 0, 1))
+		return;
+
+	/* stop any memory operation tracing */
+	atomic_set(&kmemleak_early_log, 0);
+	atomic_set(&kmemleak_enabled, 0);
+
+	/* check whether it is too early for a kernel thread */
+	if (atomic_read(&kmemleak_initialized))
+		kmemleak_cleanup();
+
+	pr_info("Kernel memory leak detector disabled\n");
+}
+
+/*
+ * Allow boot-time kmemleak disabling (enabled by default).
+ */
+static int kmemleak_boot_config(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (strcmp(str, "off") == 0)
+		kmemleak_disable();
+	else if (strcmp(str, "on") != 0)
+		return -EINVAL;
+	return 0;
+}
+early_param("kmemleak", kmemleak_boot_config);
+
+/*
+ * Kkmemleak initialization.
+ */
+void __init kmemleak_init(void)
+{
+	int i;
+	unsigned long flags;
+
+	jiffies_scan_yield = msecs_to_jiffies(MSECS_SCAN_YIELD);
+	jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
+	jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
+
+	object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
+	scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
+	INIT_PRIO_TREE_ROOT(&object_tree_root);
+
+	/* the kernel is still in UP mode, so disabling the IRQs is enough */
+	local_irq_save(flags);
+	if (!atomic_read(&kmemleak_error)) {
+		atomic_set(&kmemleak_enabled, 1);
+		atomic_set(&kmemleak_early_log, 0);
+	}
+	local_irq_restore(flags);
+
+	/*
+	 * This is the point where tracking allocations is safe. Automatic
+	 * scanning is started during the late initcall. Add the early logged
+	 * callbacks to the kmemleak infrastructure.
+	 */
+	for (i = 0; i < crt_early_log; i++) {
+		struct early_log *log = &early_log[i];
+
+		switch (log->op_type) {
+		case KMEMLEAK_ALLOC:
+			kmemleak_alloc(log->ptr, log->size, log->min_count,
+				       GFP_KERNEL);
+			break;
+		case KMEMLEAK_FREE:
+			kmemleak_free(log->ptr);
+			break;
+		case KMEMLEAK_NOT_LEAK:
+			kmemleak_not_leak(log->ptr);
+			break;
+		case KMEMLEAK_IGNORE:
+			kmemleak_ignore(log->ptr);
+			break;
+		case KMEMLEAK_SCAN_AREA:
+			kmemleak_scan_area(log->ptr, log->offset, log->length,
+					   GFP_KERNEL);
+			break;
+		case KMEMLEAK_NO_SCAN:
+			kmemleak_no_scan(log->ptr);
+			break;
+		default:
+			WARN_ON(1);
+		}
+	}
+}
+
+/*
+ * Late initialization function.
+ */
+static int __init kmemleak_late_init(void)
+{
+	struct dentry *dentry;
+
+	atomic_set(&kmemleak_initialized, 1);
+
+	if (atomic_read(&kmemleak_error)) {
+		/*
+		 * Some error occured and kmemleak was disabled. There is a
+		 * small chance that kmemleak_disable() was called immediately
+		 * after setting kmemleak_initialized and we may end up with
+		 * two clean-up threads but serialized by scan_mutex.
+		 */
+		kmemleak_cleanup();
+		return -ENOMEM;
+	}
+
+	dentry = debugfs_create_file("kmemleak", S_IRUGO, NULL, NULL,
+				     &kmemleak_fops);
+	if (!dentry)
+		pr_warning("kmemleak: Failed to create the debugfs kmemleak "
+			   "file\n");
+	mutex_lock(&kmemleak_mutex);
+	start_scan_thread();
+	mutex_unlock(&kmemleak_mutex);
+
+	pr_info("Kernel memory leak detector initialized\n");
+
+	return 0;
+}
+late_initcall(kmemleak_late_init);
diff --git a/mm/maccess.c b/mm/maccess.c
index ac40796cfb1..9073695ff25 100644
--- a/mm/maccess.c
+++ b/mm/maccess.c
@@ -39,7 +39,7 @@ EXPORT_SYMBOL_GPL(probe_kernel_read);
  * Safely write to address @dst from the buffer at @src.  If a kernel fault
  * happens, handle that and return -EFAULT.
  */
-long probe_kernel_write(void *dst, void *src, size_t size)
+long notrace __weak probe_kernel_write(void *dst, void *src, size_t size)
 {
 	long ret;
 	mm_segment_t old_fs = get_fs();
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 01c2d8f1468..78eb8552818 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -314,14 +314,6 @@ static struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
 	return mem;
 }
 
-static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem)
-{
-	if (!mem)
-		return true;
-	return css_is_removed(&mem->css);
-}
-
-
 /*
  * Call callback function against all cgroup under hierarchy tree.
  */
@@ -932,7 +924,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 	if (unlikely(!mem))
 		return 0;
 
-	VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
+	VM_BUG_ON(css_is_removed(&mem->css));
 
 	while (1) {
 		int ret;
@@ -1488,8 +1480,9 @@ void mem_cgroup_uncharge_cache_page(struct page *page)
 	__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
 }
 
+#ifdef CONFIG_SWAP
 /*
- * called from __delete_from_swap_cache() and drop "page" account.
+ * called after __delete_from_swap_cache() and drop "page" account.
  * memcg information is recorded to swap_cgroup of "ent"
  */
 void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
@@ -1506,6 +1499,7 @@ void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
 	if (memcg)
 		css_put(&memcg->css);
 }
+#endif
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
 /*
diff --git a/mm/mlock.c b/mm/mlock.c
index cbe9e0581b7..ac130433c7d 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -629,52 +629,43 @@ void user_shm_unlock(size_t size, struct user_struct *user)
 	free_uid(user);
 }
 
-void *alloc_locked_buffer(size_t size)
+int account_locked_memory(struct mm_struct *mm, struct rlimit *rlim,
+			  size_t size)
 {
-	unsigned long rlim, vm, pgsz;
-	void *buffer = NULL;
+	unsigned long lim, vm, pgsz;
+	int error = -ENOMEM;
 
 	pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
 
-	down_write(&current->mm->mmap_sem);
-
-	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
-	vm   = current->mm->total_vm + pgsz;
-	if (rlim < vm)
-		goto out;
+	down_write(&mm->mmap_sem);
 
-	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
-	vm   = current->mm->locked_vm + pgsz;
-	if (rlim < vm)
+	lim = rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+	vm   = mm->total_vm + pgsz;
+	if (lim < vm)
 		goto out;
 
-	buffer = kzalloc(size, GFP_KERNEL);
-	if (!buffer)
+	lim = rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+	vm   = mm->locked_vm + pgsz;
+	if (lim < vm)
 		goto out;
 
-	current->mm->total_vm  += pgsz;
-	current->mm->locked_vm += pgsz;
+	mm->total_vm  += pgsz;
+	mm->locked_vm += pgsz;
 
+	error = 0;
  out:
-	up_write(&current->mm->mmap_sem);
-	return buffer;
+	up_write(&mm->mmap_sem);
+	return error;
 }
 
-void release_locked_buffer(void *buffer, size_t size)
+void refund_locked_memory(struct mm_struct *mm, size_t size)
 {
 	unsigned long pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
 
-	down_write(&current->mm->mmap_sem);
-
-	current->mm->total_vm  -= pgsz;
-	current->mm->locked_vm -= pgsz;
-
-	up_write(&current->mm->mmap_sem);
-}
+	down_write(&mm->mmap_sem);
 
-void free_locked_buffer(void *buffer, size_t size)
-{
-	release_locked_buffer(buffer, size);
+	mm->total_vm  -= pgsz;
+	mm->locked_vm -= pgsz;
 
-	kfree(buffer);
+	up_write(&mm->mmap_sem);
 }
diff --git a/mm/mmap.c b/mm/mmap.c
index 6b7b1a95944..34579b23ebd 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -28,6 +28,7 @@
 #include <linux/mempolicy.h>
 #include <linux/rmap.h>
 #include <linux/mmu_notifier.h>
+#include <linux/perf_counter.h>
 
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
@@ -87,6 +88,9 @@ int sysctl_overcommit_ratio = 50;	/* default is 50% */
 int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
 struct percpu_counter vm_committed_as;
 
+/* amount of vm to protect from userspace access */
+unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+
 /*
  * Check that a process has enough memory to allocate a new virtual
  * mapping. 0 means there is enough memory for the allocation to
@@ -1219,6 +1223,8 @@ munmap_back:
 	if (correct_wcount)
 		atomic_inc(&inode->i_writecount);
 out:
+	perf_counter_mmap(vma);
+
 	mm->total_vm += len >> PAGE_SHIFT;
 	vm_stat_account(mm, vm_flags, file, len >> PAGE_SHIFT);
 	if (vm_flags & VM_LOCKED) {
@@ -2305,6 +2311,8 @@ int install_special_mapping(struct mm_struct *mm,
 
 	mm->total_vm += len >> PAGE_SHIFT;
 
+	perf_counter_mmap(vma);
+
 	return 0;
 }
 
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 16ce8b955dc..f5b7d176021 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -6,6 +6,7 @@
 
 
 #include <linux/stddef.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/module.h>
 
@@ -72,3 +73,17 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
 	*zone = zonelist_zone(z);
 	return z;
 }
+
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone)
+{
+	if (page_to_pfn(page) != pfn)
+		return 0;
+
+	if (page_zone(page) != zone)
+		return 0;
+
+	return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 258197b76fb..d80311baeb2 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -23,6 +23,7 @@
 #include <linux/swapops.h>
 #include <linux/mmu_notifier.h>
 #include <linux/migrate.h>
+#include <linux/perf_counter.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
@@ -299,6 +300,7 @@ SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
 		error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
 		if (error)
 			goto out;
+		perf_counter_mmap(vma);
 		nstart = tmp;
 
 		if (nstart < prev->vm_end)
diff --git a/mm/nommu.c b/mm/nommu.c
index b571ef70742..2fd2ad5da98 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -69,6 +69,9 @@ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
 int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
 int heap_stack_gap = 0;
 
+/* amount of vm to protect from userspace access */
+unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+
 atomic_long_t mmap_pages_allocated;
 
 EXPORT_SYMBOL(mem_map);
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 92bcf1db16b..a7b2460e922 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -284,22 +284,28 @@ static void dump_tasks(const struct mem_cgroup *mem)
 	printk(KERN_INFO "[ pid ]   uid  tgid total_vm      rss cpu oom_adj "
 	       "name\n");
 	do_each_thread(g, p) {
-		/*
-		 * total_vm and rss sizes do not exist for tasks with a
-		 * detached mm so there's no need to report them.
-		 */
-		if (!p->mm)
-			continue;
+		struct mm_struct *mm;
+
 		if (mem && !task_in_mem_cgroup(p, mem))
 			continue;
 		if (!thread_group_leader(p))
 			continue;
 
 		task_lock(p);
+		mm = p->mm;
+		if (!mm) {
+			/*
+			 * total_vm and rss sizes do not exist for tasks with no
+			 * mm so there's no need to report them; they can't be
+			 * oom killed anyway.
+			 */
+			task_unlock(p);
+			continue;
+		}
 		printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d     %3d %s\n",
-		       p->pid, __task_cred(p)->uid, p->tgid,
-		       p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p),
-		       p->oomkilladj, p->comm);
+		       p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
+		       get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+		       p->comm);
 		task_unlock(p);
 	} while_each_thread(g, p);
 }
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 30351f0063a..bb553c3e955 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -94,12 +94,12 @@ unsigned long vm_dirty_bytes;
 /*
  * The interval between `kupdate'-style writebacks
  */
-unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */
+unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
 
 /*
  * The longest time for which data is allowed to remain dirty
  */
-unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */
+unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
 
 /*
  * Flag that makes the machine dump writes/reads and block dirtyings.
@@ -770,7 +770,7 @@ static void wb_kupdate(unsigned long arg)
 
 	sync_supers();
 
-	oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval);
+	oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
 	start_jif = jiffies;
 	next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
 	nr_to_write = global_page_state(NR_FILE_DIRTY) +
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index fe753ecf2aa..17d5f539a9a 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -46,6 +46,7 @@
 #include <linux/page-isolation.h>
 #include <linux/page_cgroup.h>
 #include <linux/debugobjects.h>
+#include <linux/kmemleak.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -149,10 +150,6 @@ static unsigned long __meminitdata dma_reserve;
   static int __meminitdata nr_nodemap_entries;
   static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
   static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-  static unsigned long __meminitdata node_boundary_start_pfn[MAX_NUMNODES];
-  static unsigned long __meminitdata node_boundary_end_pfn[MAX_NUMNODES];
-#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
   static unsigned long __initdata required_kernelcore;
   static unsigned long __initdata required_movablecore;
   static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
@@ -3103,64 +3100,6 @@ void __init sparse_memory_present_with_active_regions(int nid)
 }
 
 /**
- * push_node_boundaries - Push node boundaries to at least the requested boundary
- * @nid: The nid of the node to push the boundary for
- * @start_pfn: The start pfn of the node
- * @end_pfn: The end pfn of the node
- *
- * In reserve-based hot-add, mem_map is allocated that is unused until hotadd
- * time. Specifically, on x86_64, SRAT will report ranges that can potentially
- * be hotplugged even though no physical memory exists. This function allows
- * an arch to push out the node boundaries so mem_map is allocated that can
- * be used later.
- */
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-void __init push_node_boundaries(unsigned int nid,
-		unsigned long start_pfn, unsigned long end_pfn)
-{
-	mminit_dprintk(MMINIT_TRACE, "zoneboundary",
-			"Entering push_node_boundaries(%u, %lu, %lu)\n",
-			nid, start_pfn, end_pfn);
-
-	/* Initialise the boundary for this node if necessary */
-	if (node_boundary_end_pfn[nid] == 0)
-		node_boundary_start_pfn[nid] = -1UL;
-
-	/* Update the boundaries */
-	if (node_boundary_start_pfn[nid] > start_pfn)
-		node_boundary_start_pfn[nid] = start_pfn;
-	if (node_boundary_end_pfn[nid] < end_pfn)
-		node_boundary_end_pfn[nid] = end_pfn;
-}
-
-/* If necessary, push the node boundary out for reserve hotadd */
-static void __meminit account_node_boundary(unsigned int nid,
-		unsigned long *start_pfn, unsigned long *end_pfn)
-{
-	mminit_dprintk(MMINIT_TRACE, "zoneboundary",
-			"Entering account_node_boundary(%u, %lu, %lu)\n",
-			nid, *start_pfn, *end_pfn);
-
-	/* Return if boundary information has not been provided */
-	if (node_boundary_end_pfn[nid] == 0)
-		return;
-
-	/* Check the boundaries and update if necessary */
-	if (node_boundary_start_pfn[nid] < *start_pfn)
-		*start_pfn = node_boundary_start_pfn[nid];
-	if (node_boundary_end_pfn[nid] > *end_pfn)
-		*end_pfn = node_boundary_end_pfn[nid];
-}
-#else
-void __init push_node_boundaries(unsigned int nid,
-		unsigned long start_pfn, unsigned long end_pfn) {}
-
-static void __meminit account_node_boundary(unsigned int nid,
-		unsigned long *start_pfn, unsigned long *end_pfn) {}
-#endif
-
-
-/**
  * get_pfn_range_for_nid - Return the start and end page frames for a node
  * @nid: The nid to return the range for. If MAX_NUMNODES, the min and max PFN are returned.
  * @start_pfn: Passed by reference. On return, it will have the node start_pfn.
@@ -3185,9 +3124,6 @@ void __meminit get_pfn_range_for_nid(unsigned int nid,
 
 	if (*start_pfn == -1UL)
 		*start_pfn = 0;
-
-	/* Push the node boundaries out if requested */
-	account_node_boundary(nid, start_pfn, end_pfn);
 }
 
 /*
@@ -3793,10 +3729,6 @@ void __init remove_all_active_ranges(void)
 {
 	memset(early_node_map, 0, sizeof(early_node_map));
 	nr_nodemap_entries = 0;
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-	memset(node_boundary_start_pfn, 0, sizeof(node_boundary_start_pfn));
-	memset(node_boundary_end_pfn, 0, sizeof(node_boundary_end_pfn));
-#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
 }
 
 /* Compare two active node_active_regions */
@@ -4615,6 +4547,16 @@ void *__init alloc_large_system_hash(const char *tablename,
 	if (_hash_mask)
 		*_hash_mask = (1 << log2qty) - 1;
 
+	/*
+	 * If hashdist is set, the table allocation is done with __vmalloc()
+	 * which invokes the kmemleak_alloc() callback. This function may also
+	 * be called before the slab and kmemleak are initialised when
+	 * kmemleak simply buffers the request to be executed later
+	 * (GFP_ATOMIC flag ignored in this case).
+	 */
+	if (!hashdist)
+		kmemleak_alloc(table, size, 1, GFP_ATOMIC);
+
 	return table;
 }
 
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 791905c991d..11a8a10a390 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -69,7 +69,7 @@ static int __init alloc_node_page_cgroup(int nid)
 	return 0;
 }
 
-void __init page_cgroup_init(void)
+void __init page_cgroup_init_flatmem(void)
 {
 
 	int nid, fail;
@@ -113,16 +113,11 @@ static int __init_refok init_section_page_cgroup(unsigned long pfn)
 	if (!section->page_cgroup) {
 		nid = page_to_nid(pfn_to_page(pfn));
 		table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
-		if (slab_is_available()) {
-			base = kmalloc_node(table_size,
-					GFP_KERNEL | __GFP_NOWARN, nid);
-			if (!base)
-				base = vmalloc_node(table_size, nid);
-		} else {
-			base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
-				table_size,
-				PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-		}
+		VM_BUG_ON(!slab_is_available());
+		base = kmalloc_node(table_size,
+				GFP_KERNEL | __GFP_NOWARN, nid);
+		if (!base)
+			base = vmalloc_node(table_size, nid);
 	} else {
 		/*
  		 * We don't have to allocate page_cgroup again, but
diff --git a/mm/pdflush.c b/mm/pdflush.c
index f2caf96993f..235ac440c44 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -58,14 +58,6 @@ static DEFINE_SPINLOCK(pdflush_lock);
 int nr_pdflush_threads = 0;
 
 /*
- * The max/min number of pdflush threads. R/W by sysctl at
- * /proc/sys/vm/nr_pdflush_threads_max/min
- */
-int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
-int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
-
-
-/*
  * The time at which the pdflush thread pool last went empty
  */
 static unsigned long last_empty_jifs;
@@ -76,7 +68,7 @@ static unsigned long last_empty_jifs;
  * Thread pool management algorithm:
  * 
  * - The minimum and maximum number of pdflush instances are bound
- *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
+ *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
  * 
  * - If there have been no idle pdflush instances for 1 second, create
  *   a new one.
@@ -142,13 +134,14 @@ static int __pdflush(struct pdflush_work *my_work)
 		 * To throttle creation, we reset last_empty_jifs.
 		 */
 		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
-			if (list_empty(&pdflush_list) &&
-			    nr_pdflush_threads < nr_pdflush_threads_max) {
-				last_empty_jifs = jiffies;
-				nr_pdflush_threads++;
-				spin_unlock_irq(&pdflush_lock);
-				start_one_pdflush_thread();
-				spin_lock_irq(&pdflush_lock);
+			if (list_empty(&pdflush_list)) {
+				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+					last_empty_jifs = jiffies;
+					nr_pdflush_threads++;
+					spin_unlock_irq(&pdflush_lock);
+					start_one_pdflush_thread();
+					spin_lock_irq(&pdflush_lock);
+				}
 			}
 		}
 
@@ -160,7 +153,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (list_empty(&pdflush_list))
 			continue;
-		if (nr_pdflush_threads <= nr_pdflush_threads_min)
+		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
 		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
@@ -266,9 +259,9 @@ static int __init pdflush_init(void)
 	 * Pre-set nr_pdflush_threads...  If we fail to create,
 	 * the count will be decremented.
 	 */
-	nr_pdflush_threads = nr_pdflush_threads_min;
+	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
 
-	for (i = 0; i < nr_pdflush_threads_min; i++)
+	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
 		start_one_pdflush_thread();
 	return 0;
 }
diff --git a/mm/percpu.c b/mm/percpu.c
index 1aa5d8fbca1..c0b2c1a76e8 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -23,7 +23,7 @@
  * Allocation is done in offset-size areas of single unit space.  Ie,
  * an area of 512 bytes at 6k in c1 occupies 512 bytes at 6k of c1:u0,
  * c1:u1, c1:u2 and c1:u3.  Percpu access can be done by configuring
- * percpu base registers UNIT_SIZE apart.
+ * percpu base registers pcpu_unit_size apart.
  *
  * There are usually many small percpu allocations many of them as
  * small as 4 bytes.  The allocator organizes chunks into lists
@@ -38,8 +38,8 @@
  * region and negative allocated.  Allocation inside a chunk is done
  * by scanning this map sequentially and serving the first matching
  * entry.  This is mostly copied from the percpu_modalloc() allocator.
- * Chunks are also linked into a rb tree to ease address to chunk
- * mapping during free.
+ * Chunks can be determined from the address using the index field
+ * in the page struct. The index field contains a pointer to the chunk.
  *
  * To use this allocator, arch code should do the followings.
  *
@@ -61,7 +61,6 @@
 #include <linux/mutex.h>
 #include <linux/percpu.h>
 #include <linux/pfn.h>
-#include <linux/rbtree.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/vmalloc.h>
@@ -88,7 +87,6 @@
 
 struct pcpu_chunk {
 	struct list_head	list;		/* linked to pcpu_slot lists */
-	struct rb_node		rb_node;	/* key is chunk->vm->addr */
 	int			free_size;	/* free bytes in the chunk */
 	int			contig_hint;	/* max contiguous size hint */
 	struct vm_struct	*vm;		/* mapped vmalloc region */
@@ -110,9 +108,21 @@ static size_t pcpu_chunk_struct_size __read_mostly;
 void *pcpu_base_addr __read_mostly;
 EXPORT_SYMBOL_GPL(pcpu_base_addr);
 
-/* optional reserved chunk, only accessible for reserved allocations */
+/*
+ * The first chunk which always exists.  Note that unlike other
+ * chunks, this one can be allocated and mapped in several different
+ * ways and thus often doesn't live in the vmalloc area.
+ */
+static struct pcpu_chunk *pcpu_first_chunk;
+
+/*
+ * Optional reserved chunk.  This chunk reserves part of the first
+ * chunk and serves it for reserved allocations.  The amount of
+ * reserved offset is in pcpu_reserved_chunk_limit.  When reserved
+ * area doesn't exist, the following variables contain NULL and 0
+ * respectively.
+ */
 static struct pcpu_chunk *pcpu_reserved_chunk;
-/* offset limit of the reserved chunk */
 static int pcpu_reserved_chunk_limit;
 
 /*
@@ -121,7 +131,7 @@ static int pcpu_reserved_chunk_limit;
  * There are two locks - pcpu_alloc_mutex and pcpu_lock.  The former
  * protects allocation/reclaim paths, chunks and chunk->page arrays.
  * The latter is a spinlock and protects the index data structures -
- * chunk slots, rbtree, chunks and area maps in chunks.
+ * chunk slots, chunks and area maps in chunks.
  *
  * During allocation, pcpu_alloc_mutex is kept locked all the time and
  * pcpu_lock is grabbed and released as necessary.  All actual memory
@@ -140,7 +150,6 @@ static DEFINE_MUTEX(pcpu_alloc_mutex);	/* protects whole alloc and reclaim */
 static DEFINE_SPINLOCK(pcpu_lock);	/* protects index data structures */
 
 static struct list_head *pcpu_slot __read_mostly; /* chunk list slots */
-static struct rb_root pcpu_addr_root = RB_ROOT;	/* chunks by address */
 
 /* reclaim work to release fully free chunks, scheduled from free path */
 static void pcpu_reclaim(struct work_struct *work);
@@ -191,6 +200,18 @@ static bool pcpu_chunk_page_occupied(struct pcpu_chunk *chunk,
 	return *pcpu_chunk_pagep(chunk, 0, page_idx) != NULL;
 }
 
+/* set the pointer to a chunk in a page struct */
+static void pcpu_set_page_chunk(struct page *page, struct pcpu_chunk *pcpu)
+{
+	page->index = (unsigned long)pcpu;
+}
+
+/* obtain pointer to a chunk from a page struct */
+static struct pcpu_chunk *pcpu_get_page_chunk(struct page *page)
+{
+	return (struct pcpu_chunk *)page->index;
+}
+
 /**
  * pcpu_mem_alloc - allocate memory
  * @size: bytes to allocate
@@ -257,93 +278,26 @@ static void pcpu_chunk_relocate(struct pcpu_chunk *chunk, int oslot)
 	}
 }
 
-static struct rb_node **pcpu_chunk_rb_search(void *addr,
-					     struct rb_node **parentp)
-{
-	struct rb_node **p = &pcpu_addr_root.rb_node;
-	struct rb_node *parent = NULL;
-	struct pcpu_chunk *chunk;
-
-	while (*p) {
-		parent = *p;
-		chunk = rb_entry(parent, struct pcpu_chunk, rb_node);
-
-		if (addr < chunk->vm->addr)
-			p = &(*p)->rb_left;
-		else if (addr > chunk->vm->addr)
-			p = &(*p)->rb_right;
-		else
-			break;
-	}
-
-	if (parentp)
-		*parentp = parent;
-	return p;
-}
-
 /**
- * pcpu_chunk_addr_search - search for chunk containing specified address
- * @addr: address to search for
- *
- * Look for chunk which might contain @addr.  More specifically, it
- * searchs for the chunk with the highest start address which isn't
- * beyond @addr.
- *
- * CONTEXT:
- * pcpu_lock.
+ * pcpu_chunk_addr_search - determine chunk containing specified address
+ * @addr: address for which the chunk needs to be determined.
  *
  * RETURNS:
  * The address of the found chunk.
  */
 static struct pcpu_chunk *pcpu_chunk_addr_search(void *addr)
 {
-	struct rb_node *n, *parent;
-	struct pcpu_chunk *chunk;
+	void *first_start = pcpu_first_chunk->vm->addr;
 
-	/* is it in the reserved chunk? */
-	if (pcpu_reserved_chunk) {
-		void *start = pcpu_reserved_chunk->vm->addr;
-
-		if (addr >= start && addr < start + pcpu_reserved_chunk_limit)
+	/* is it in the first chunk? */
+	if (addr >= first_start && addr < first_start + pcpu_chunk_size) {
+		/* is it in the reserved area? */
+		if (addr < first_start + pcpu_reserved_chunk_limit)
 			return pcpu_reserved_chunk;
+		return pcpu_first_chunk;
 	}
 
-	/* nah... search the regular ones */
-	n = *pcpu_chunk_rb_search(addr, &parent);
-	if (!n) {
-		/* no exactly matching chunk, the parent is the closest */
-		n = parent;
-		BUG_ON(!n);
-	}
-	chunk = rb_entry(n, struct pcpu_chunk, rb_node);
-
-	if (addr < chunk->vm->addr) {
-		/* the parent was the next one, look for the previous one */
-		n = rb_prev(n);
-		BUG_ON(!n);
-		chunk = rb_entry(n, struct pcpu_chunk, rb_node);
-	}
-
-	return chunk;
-}
-
-/**
- * pcpu_chunk_addr_insert - insert chunk into address rb tree
- * @new: chunk to insert
- *
- * Insert @new into address rb tree.
- *
- * CONTEXT:
- * pcpu_lock.
- */
-static void pcpu_chunk_addr_insert(struct pcpu_chunk *new)
-{
-	struct rb_node **p, *parent;
-
-	p = pcpu_chunk_rb_search(new->vm->addr, &parent);
-	BUG_ON(*p);
-	rb_link_node(&new->rb_node, parent, p);
-	rb_insert_color(&new->rb_node, &pcpu_addr_root);
+	return pcpu_get_page_chunk(vmalloc_to_page(addr));
 }
 
 /**
@@ -755,6 +709,7 @@ static int pcpu_populate_chunk(struct pcpu_chunk *chunk, int off, int size)
 						  alloc_mask, 0);
 			if (!*pagep)
 				goto err;
+			pcpu_set_page_chunk(*pagep, chunk);
 		}
 	}
 
@@ -879,7 +834,6 @@ restart:
 
 	spin_lock_irq(&pcpu_lock);
 	pcpu_chunk_relocate(chunk, -1);
-	pcpu_chunk_addr_insert(chunk);
 	goto restart;
 
 area_found:
@@ -968,7 +922,6 @@ static void pcpu_reclaim(struct work_struct *work)
 		if (chunk == list_first_entry(head, struct pcpu_chunk, list))
 			continue;
 
-		rb_erase(&chunk->rb_node, &pcpu_addr_root);
 		list_move(&chunk->list, &todo);
 	}
 
@@ -1147,7 +1100,8 @@ size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn,
 
 	if (reserved_size) {
 		schunk->free_size = reserved_size;
-		pcpu_reserved_chunk = schunk;	/* not for dynamic alloc */
+		pcpu_reserved_chunk = schunk;
+		pcpu_reserved_chunk_limit = static_size + reserved_size;
 	} else {
 		schunk->free_size = dyn_size;
 		dyn_size = 0;			/* dynamic area covered */
@@ -1158,8 +1112,6 @@ size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn,
 	if (schunk->free_size)
 		schunk->map[schunk->map_used++] = schunk->free_size;
 
-	pcpu_reserved_chunk_limit = static_size + schunk->free_size;
-
 	/* init dynamic chunk if necessary */
 	if (dyn_size) {
 		dchunk = alloc_bootmem(sizeof(struct pcpu_chunk));
@@ -1226,13 +1178,8 @@ size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn,
 	}
 
 	/* link the first chunk in */
-	if (!dchunk) {
-		pcpu_chunk_relocate(schunk, -1);
-		pcpu_chunk_addr_insert(schunk);
-	} else {
-		pcpu_chunk_relocate(dchunk, -1);
-		pcpu_chunk_addr_insert(dchunk);
-	}
+	pcpu_first_chunk = dchunk ?: schunk;
+	pcpu_chunk_relocate(pcpu_first_chunk, -1);
 
 	/* we're done */
 	pcpu_base_addr = (void *)pcpu_chunk_addr(schunk, 0, 0);
diff --git a/mm/rmap.c b/mm/rmap.c
index 16521664010..23122af3261 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -14,7 +14,7 @@
  * Original design by Rik van Riel <riel@conectiva.com.br> 2001
  * File methods by Dave McCracken <dmccr@us.ibm.com> 2003, 2004
  * Anonymous methods by Andrea Arcangeli <andrea@suse.de> 2004
- * Contributions by Hugh Dickins <hugh@veritas.com> 2003, 2004
+ * Contributions by Hugh Dickins 2003, 2004
  */
 
 /*
diff --git a/mm/shmem.c b/mm/shmem.c
index b25f95ce3db..0132fbd45a2 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2659,6 +2659,7 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
 	if (error)
 		goto close_file;
 #endif
+	ima_counts_get(file);
 	return file;
 
 close_file:
@@ -2684,7 +2685,6 @@ int shmem_zero_setup(struct vm_area_struct *vma)
 	if (IS_ERR(file))
 		return PTR_ERR(file);
 
-	ima_shm_check(file);
 	if (vma->vm_file)
 		fput(vma->vm_file);
 	vma->vm_file = file;
diff --git a/mm/slab.c b/mm/slab.c
index 9a90b00d2f9..18e3164de09 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -102,11 +102,12 @@
 #include	<linux/cpu.h>
 #include	<linux/sysctl.h>
 #include	<linux/module.h>
-#include	<trace/kmemtrace.h>
+#include	<linux/kmemtrace.h>
 #include	<linux/rcupdate.h>
 #include	<linux/string.h>
 #include	<linux/uaccess.h>
 #include	<linux/nodemask.h>
+#include	<linux/kmemleak.h>
 #include	<linux/mempolicy.h>
 #include	<linux/mutex.h>
 #include	<linux/fault-inject.h>
@@ -178,13 +179,13 @@
 			 SLAB_STORE_USER | \
 			 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
 			 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
-			 SLAB_DEBUG_OBJECTS)
+			 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)
 #else
 # define CREATE_MASK	(SLAB_HWCACHE_ALIGN | \
 			 SLAB_CACHE_DMA | \
 			 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
 			 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
-			 SLAB_DEBUG_OBJECTS)
+			 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)
 #endif
 
 /*
@@ -303,6 +304,12 @@ struct kmem_list3 {
 };
 
 /*
+ * The slab allocator is initialized with interrupts disabled. Therefore, make
+ * sure early boot allocations don't accidentally enable interrupts.
+ */
+static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
+
+/*
  * Need this for bootstrapping a per node allocator.
  */
 #define NUM_INIT_LISTS (3 * MAX_NUMNODES)
@@ -315,7 +322,7 @@ static int drain_freelist(struct kmem_cache *cache,
 			struct kmem_list3 *l3, int tofree);
 static void free_block(struct kmem_cache *cachep, void **objpp, int len,
 			int node);
-static int enable_cpucache(struct kmem_cache *cachep);
+static int enable_cpucache(struct kmem_cache *cachep, gfp_t gfp);
 static void cache_reap(struct work_struct *unused);
 
 /*
@@ -752,6 +759,7 @@ static enum {
 	NONE,
 	PARTIAL_AC,
 	PARTIAL_L3,
+	EARLY,
 	FULL
 } g_cpucache_up;
 
@@ -760,7 +768,7 @@ static enum {
  */
 int slab_is_available(void)
 {
-	return g_cpucache_up == FULL;
+	return g_cpucache_up >= EARLY;
 }
 
 static DEFINE_PER_CPU(struct delayed_work, reap_work);
@@ -958,12 +966,20 @@ static void __cpuinit start_cpu_timer(int cpu)
 }
 
 static struct array_cache *alloc_arraycache(int node, int entries,
-					    int batchcount)
+					    int batchcount, gfp_t gfp)
 {
 	int memsize = sizeof(void *) * entries + sizeof(struct array_cache);
 	struct array_cache *nc = NULL;
 
-	nc = kmalloc_node(memsize, GFP_KERNEL, node);
+	nc = kmalloc_node(memsize, gfp, node);
+	/*
+	 * The array_cache structures contain pointers to free object.
+	 * However, when such objects are allocated or transfered to another
+	 * cache the pointers are not cleared and they could be counted as
+	 * valid references during a kmemleak scan. Therefore, kmemleak must
+	 * not scan such objects.
+	 */
+	kmemleak_no_scan(nc);
 	if (nc) {
 		nc->avail = 0;
 		nc->limit = entries;
@@ -1003,7 +1019,7 @@ static int transfer_objects(struct array_cache *to,
 #define drain_alien_cache(cachep, alien) do { } while (0)
 #define reap_alien(cachep, l3) do { } while (0)
 
-static inline struct array_cache **alloc_alien_cache(int node, int limit)
+static inline struct array_cache **alloc_alien_cache(int node, int limit, gfp_t gfp)
 {
 	return (struct array_cache **)BAD_ALIEN_MAGIC;
 }
@@ -1034,7 +1050,7 @@ static inline void *____cache_alloc_node(struct kmem_cache *cachep,
 static void *____cache_alloc_node(struct kmem_cache *, gfp_t, int);
 static void *alternate_node_alloc(struct kmem_cache *, gfp_t);
 
-static struct array_cache **alloc_alien_cache(int node, int limit)
+static struct array_cache **alloc_alien_cache(int node, int limit, gfp_t gfp)
 {
 	struct array_cache **ac_ptr;
 	int memsize = sizeof(void *) * nr_node_ids;
@@ -1042,14 +1058,14 @@ static struct array_cache **alloc_alien_cache(int node, int limit)
 
 	if (limit > 1)
 		limit = 12;
-	ac_ptr = kmalloc_node(memsize, GFP_KERNEL, node);
+	ac_ptr = kmalloc_node(memsize, gfp, node);
 	if (ac_ptr) {
 		for_each_node(i) {
 			if (i == node || !node_online(i)) {
 				ac_ptr[i] = NULL;
 				continue;
 			}
-			ac_ptr[i] = alloc_arraycache(node, limit, 0xbaadf00d);
+			ac_ptr[i] = alloc_arraycache(node, limit, 0xbaadf00d, gfp);
 			if (!ac_ptr[i]) {
 				for (i--; i >= 0; i--)
 					kfree(ac_ptr[i]);
@@ -1282,20 +1298,20 @@ static int __cpuinit cpuup_prepare(long cpu)
 		struct array_cache **alien = NULL;
 
 		nc = alloc_arraycache(node, cachep->limit,
-					cachep->batchcount);
+					cachep->batchcount, GFP_KERNEL);
 		if (!nc)
 			goto bad;
 		if (cachep->shared) {
 			shared = alloc_arraycache(node,
 				cachep->shared * cachep->batchcount,
-				0xbaadf00d);
+				0xbaadf00d, GFP_KERNEL);
 			if (!shared) {
 				kfree(nc);
 				goto bad;
 			}
 		}
 		if (use_alien_caches) {
-			alien = alloc_alien_cache(node, cachep->limit);
+			alien = alloc_alien_cache(node, cachep->limit, GFP_KERNEL);
 			if (!alien) {
 				kfree(shared);
 				kfree(nc);
@@ -1399,10 +1415,9 @@ static void init_list(struct kmem_cache *cachep, struct kmem_list3 *list,
 {
 	struct kmem_list3 *ptr;
 
-	ptr = kmalloc_node(sizeof(struct kmem_list3), GFP_KERNEL, nodeid);
+	ptr = kmalloc_node(sizeof(struct kmem_list3), GFP_NOWAIT, nodeid);
 	BUG_ON(!ptr);
 
-	local_irq_disable();
 	memcpy(ptr, list, sizeof(struct kmem_list3));
 	/*
 	 * Do not assume that spinlocks can be initialized via memcpy:
@@ -1411,7 +1426,6 @@ static void init_list(struct kmem_cache *cachep, struct kmem_list3 *list,
 
 	MAKE_ALL_LISTS(cachep, ptr, nodeid);
 	cachep->nodelists[nodeid] = ptr;
-	local_irq_enable();
 }
 
 /*
@@ -1575,9 +1589,8 @@ void __init kmem_cache_init(void)
 	{
 		struct array_cache *ptr;
 
-		ptr = kmalloc(sizeof(struct arraycache_init), GFP_KERNEL);
+		ptr = kmalloc(sizeof(struct arraycache_init), GFP_NOWAIT);
 
-		local_irq_disable();
 		BUG_ON(cpu_cache_get(&cache_cache) != &initarray_cache.cache);
 		memcpy(ptr, cpu_cache_get(&cache_cache),
 		       sizeof(struct arraycache_init));
@@ -1587,11 +1600,9 @@ void __init kmem_cache_init(void)
 		spin_lock_init(&ptr->lock);
 
 		cache_cache.array[smp_processor_id()] = ptr;
-		local_irq_enable();
 
-		ptr = kmalloc(sizeof(struct arraycache_init), GFP_KERNEL);
+		ptr = kmalloc(sizeof(struct arraycache_init), GFP_NOWAIT);
 
-		local_irq_disable();
 		BUG_ON(cpu_cache_get(malloc_sizes[INDEX_AC].cs_cachep)
 		       != &initarray_generic.cache);
 		memcpy(ptr, cpu_cache_get(malloc_sizes[INDEX_AC].cs_cachep),
@@ -1603,7 +1614,6 @@ void __init kmem_cache_init(void)
 
 		malloc_sizes[INDEX_AC].cs_cachep->array[smp_processor_id()] =
 		    ptr;
-		local_irq_enable();
 	}
 	/* 5) Replace the bootstrap kmem_list3's */
 	{
@@ -1622,19 +1632,27 @@ void __init kmem_cache_init(void)
 		}
 	}
 
-	/* 6) resize the head arrays to their final sizes */
-	{
-		struct kmem_cache *cachep;
-		mutex_lock(&cache_chain_mutex);
-		list_for_each_entry(cachep, &cache_chain, next)
-			if (enable_cpucache(cachep))
-				BUG();
-		mutex_unlock(&cache_chain_mutex);
-	}
+	g_cpucache_up = EARLY;
 
 	/* Annotate slab for lockdep -- annotate the malloc caches */
 	init_lock_keys();
+}
+
+void __init kmem_cache_init_late(void)
+{
+	struct kmem_cache *cachep;
 
+	/*
+	 * Interrupts are enabled now so all GFP allocations are safe.
+	 */
+	slab_gfp_mask = __GFP_BITS_MASK;
+
+	/* 6) resize the head arrays to their final sizes */
+	mutex_lock(&cache_chain_mutex);
+	list_for_each_entry(cachep, &cache_chain, next)
+		if (enable_cpucache(cachep, GFP_NOWAIT))
+			BUG();
+	mutex_unlock(&cache_chain_mutex);
 
 	/* Done! */
 	g_cpucache_up = FULL;
@@ -2064,10 +2082,10 @@ static size_t calculate_slab_order(struct kmem_cache *cachep,
 	return left_over;
 }
 
-static int __init_refok setup_cpu_cache(struct kmem_cache *cachep)
+static int __init_refok setup_cpu_cache(struct kmem_cache *cachep, gfp_t gfp)
 {
 	if (g_cpucache_up == FULL)
-		return enable_cpucache(cachep);
+		return enable_cpucache(cachep, gfp);
 
 	if (g_cpucache_up == NONE) {
 		/*
@@ -2089,7 +2107,7 @@ static int __init_refok setup_cpu_cache(struct kmem_cache *cachep)
 			g_cpucache_up = PARTIAL_AC;
 	} else {
 		cachep->array[smp_processor_id()] =
-			kmalloc(sizeof(struct arraycache_init), GFP_KERNEL);
+			kmalloc(sizeof(struct arraycache_init), gfp);
 
 		if (g_cpucache_up == PARTIAL_AC) {
 			set_up_list3s(cachep, SIZE_L3);
@@ -2099,7 +2117,7 @@ static int __init_refok setup_cpu_cache(struct kmem_cache *cachep)
 			for_each_online_node(node) {
 				cachep->nodelists[node] =
 				    kmalloc_node(sizeof(struct kmem_list3),
-						GFP_KERNEL, node);
+						gfp, node);
 				BUG_ON(!cachep->nodelists[node]);
 				kmem_list3_init(cachep->nodelists[node]);
 			}
@@ -2153,6 +2171,7 @@ kmem_cache_create (const char *name, size_t size, size_t align,
 {
 	size_t left_over, slab_size, ralign;
 	struct kmem_cache *cachep = NULL, *pc;
+	gfp_t gfp;
 
 	/*
 	 * Sanity checks... these are all serious usage bugs.
@@ -2168,8 +2187,10 @@ kmem_cache_create (const char *name, size_t size, size_t align,
 	 * We use cache_chain_mutex to ensure a consistent view of
 	 * cpu_online_mask as well.  Please see cpuup_callback
 	 */
-	get_online_cpus();
-	mutex_lock(&cache_chain_mutex);
+	if (slab_is_available()) {
+		get_online_cpus();
+		mutex_lock(&cache_chain_mutex);
+	}
 
 	list_for_each_entry(pc, &cache_chain, next) {
 		char tmp;
@@ -2278,8 +2299,13 @@ kmem_cache_create (const char *name, size_t size, size_t align,
 	 */
 	align = ralign;
 
+	if (slab_is_available())
+		gfp = GFP_KERNEL;
+	else
+		gfp = GFP_NOWAIT;
+
 	/* Get cache's description obj. */
-	cachep = kmem_cache_zalloc(&cache_cache, GFP_KERNEL);
+	cachep = kmem_cache_zalloc(&cache_cache, gfp);
 	if (!cachep)
 		goto oops;
 
@@ -2382,7 +2408,7 @@ kmem_cache_create (const char *name, size_t size, size_t align,
 	cachep->ctor = ctor;
 	cachep->name = name;
 
-	if (setup_cpu_cache(cachep)) {
+	if (setup_cpu_cache(cachep, gfp)) {
 		__kmem_cache_destroy(cachep);
 		cachep = NULL;
 		goto oops;
@@ -2394,8 +2420,10 @@ oops:
 	if (!cachep && (flags & SLAB_PANIC))
 		panic("kmem_cache_create(): failed to create slab `%s'\n",
 		      name);
-	mutex_unlock(&cache_chain_mutex);
-	put_online_cpus();
+	if (slab_is_available()) {
+		mutex_unlock(&cache_chain_mutex);
+		put_online_cpus();
+	}
 	return cachep;
 }
 EXPORT_SYMBOL(kmem_cache_create);
@@ -2621,6 +2649,14 @@ static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp,
 		/* Slab management obj is off-slab. */
 		slabp = kmem_cache_alloc_node(cachep->slabp_cache,
 					      local_flags, nodeid);
+		/*
+		 * If the first object in the slab is leaked (it's allocated
+		 * but no one has a reference to it), we want to make sure
+		 * kmemleak does not treat the ->s_mem pointer as a reference
+		 * to the object. Otherwise we will not report the leak.
+		 */
+		kmemleak_scan_area(slabp, offsetof(struct slab, list),
+				   sizeof(struct list_head), local_flags);
 		if (!slabp)
 			return NULL;
 	} else {
@@ -3141,6 +3177,12 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)
 		STATS_INC_ALLOCMISS(cachep);
 		objp = cache_alloc_refill(cachep, flags);
 	}
+	/*
+	 * To avoid a false negative, if an object that is in one of the
+	 * per-CPU caches is leaked, we need to make sure kmemleak doesn't
+	 * treat the array pointers as a reference to the object.
+	 */
+	kmemleak_erase(&ac->entry[ac->avail]);
 	return objp;
 }
 
@@ -3327,6 +3369,8 @@ __cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid,
 	unsigned long save_flags;
 	void *ptr;
 
+	flags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(flags);
 
 	if (slab_should_failslab(cachep, flags))
@@ -3360,6 +3404,8 @@ __cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid,
   out:
 	local_irq_restore(save_flags);
 	ptr = cache_alloc_debugcheck_after(cachep, flags, ptr, caller);
+	kmemleak_alloc_recursive(ptr, obj_size(cachep), 1, cachep->flags,
+				 flags);
 
 	if (unlikely((flags & __GFP_ZERO) && ptr))
 		memset(ptr, 0, obj_size(cachep));
@@ -3405,6 +3451,8 @@ __cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller)
 	unsigned long save_flags;
 	void *objp;
 
+	flags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(flags);
 
 	if (slab_should_failslab(cachep, flags))
@@ -3415,6 +3463,8 @@ __cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller)
 	objp = __do_cache_alloc(cachep, flags);
 	local_irq_restore(save_flags);
 	objp = cache_alloc_debugcheck_after(cachep, flags, objp, caller);
+	kmemleak_alloc_recursive(objp, obj_size(cachep), 1, cachep->flags,
+				 flags);
 	prefetchw(objp);
 
 	if (unlikely((flags & __GFP_ZERO) && objp))
@@ -3530,6 +3580,7 @@ static inline void __cache_free(struct kmem_cache *cachep, void *objp)
 	struct array_cache *ac = cpu_cache_get(cachep);
 
 	check_irq_off();
+	kmemleak_free_recursive(objp, cachep->flags);
 	objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
 
 	/*
@@ -3802,7 +3853,7 @@ EXPORT_SYMBOL_GPL(kmem_cache_name);
 /*
  * This initializes kmem_list3 or resizes various caches for all nodes.
  */
-static int alloc_kmemlist(struct kmem_cache *cachep)
+static int alloc_kmemlist(struct kmem_cache *cachep, gfp_t gfp)
 {
 	int node;
 	struct kmem_list3 *l3;
@@ -3812,7 +3863,7 @@ static int alloc_kmemlist(struct kmem_cache *cachep)
 	for_each_online_node(node) {
 
                 if (use_alien_caches) {
-                        new_alien = alloc_alien_cache(node, cachep->limit);
+                        new_alien = alloc_alien_cache(node, cachep->limit, gfp);
                         if (!new_alien)
                                 goto fail;
                 }
@@ -3821,7 +3872,7 @@ static int alloc_kmemlist(struct kmem_cache *cachep)
 		if (cachep->shared) {
 			new_shared = alloc_arraycache(node,
 				cachep->shared*cachep->batchcount,
-					0xbaadf00d);
+					0xbaadf00d, gfp);
 			if (!new_shared) {
 				free_alien_cache(new_alien);
 				goto fail;
@@ -3850,7 +3901,7 @@ static int alloc_kmemlist(struct kmem_cache *cachep)
 			free_alien_cache(new_alien);
 			continue;
 		}
-		l3 = kmalloc_node(sizeof(struct kmem_list3), GFP_KERNEL, node);
+		l3 = kmalloc_node(sizeof(struct kmem_list3), gfp, node);
 		if (!l3) {
 			free_alien_cache(new_alien);
 			kfree(new_shared);
@@ -3906,18 +3957,18 @@ static void do_ccupdate_local(void *info)
 
 /* Always called with the cache_chain_mutex held */
 static int do_tune_cpucache(struct kmem_cache *cachep, int limit,
-				int batchcount, int shared)
+				int batchcount, int shared, gfp_t gfp)
 {
 	struct ccupdate_struct *new;
 	int i;
 
-	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	new = kzalloc(sizeof(*new), gfp);
 	if (!new)
 		return -ENOMEM;
 
 	for_each_online_cpu(i) {
 		new->new[i] = alloc_arraycache(cpu_to_node(i), limit,
-						batchcount);
+						batchcount, gfp);
 		if (!new->new[i]) {
 			for (i--; i >= 0; i--)
 				kfree(new->new[i]);
@@ -3944,11 +3995,11 @@ static int do_tune_cpucache(struct kmem_cache *cachep, int limit,
 		kfree(ccold);
 	}
 	kfree(new);
-	return alloc_kmemlist(cachep);
+	return alloc_kmemlist(cachep, gfp);
 }
 
 /* Called with cache_chain_mutex held always */
-static int enable_cpucache(struct kmem_cache *cachep)
+static int enable_cpucache(struct kmem_cache *cachep, gfp_t gfp)
 {
 	int err;
 	int limit, shared;
@@ -3994,7 +4045,7 @@ static int enable_cpucache(struct kmem_cache *cachep)
 	if (limit > 32)
 		limit = 32;
 #endif
-	err = do_tune_cpucache(cachep, limit, (limit + 1) / 2, shared);
+	err = do_tune_cpucache(cachep, limit, (limit + 1) / 2, shared, gfp);
 	if (err)
 		printk(KERN_ERR "enable_cpucache failed for %s, error %d.\n",
 		       cachep->name, -err);
@@ -4300,7 +4351,8 @@ ssize_t slabinfo_write(struct file *file, const char __user * buffer,
 				res = 0;
 			} else {
 				res = do_tune_cpucache(cachep, limit,
-						       batchcount, shared);
+						       batchcount, shared,
+						       GFP_KERNEL);
 			}
 			break;
 		}
diff --git a/mm/slob.c b/mm/slob.c
index a2d4ab32198..12f26149992 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -60,12 +60,14 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/rcupdate.h>
 #include <linux/list.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
+#include <linux/kmemleak.h>
 #include <asm/atomic.h>
 
 /*
@@ -255,6 +257,8 @@ static void *slob_new_pages(gfp_t gfp, int order, int node)
 
 static void slob_free_pages(void *b, int order)
 {
+	if (current->reclaim_state)
+		current->reclaim_state->reclaimed_slab += 1 << order;
 	free_pages((unsigned long)b, order);
 }
 
@@ -407,7 +411,7 @@ static void slob_free(void *block, int size)
 		spin_unlock_irqrestore(&slob_lock, flags);
 		clear_slob_page(sp);
 		free_slob_page(sp);
-		free_page((unsigned long)b);
+		slob_free_pages(b, 0);
 		return;
 	}
 
@@ -506,6 +510,7 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node)
 				   size, PAGE_SIZE << order, gfp, node);
 	}
 
+	kmemleak_alloc(ret, size, 1, gfp);
 	return ret;
 }
 EXPORT_SYMBOL(__kmalloc_node);
@@ -518,6 +523,7 @@ void kfree(const void *block)
 
 	if (unlikely(ZERO_OR_NULL_PTR(block)))
 		return;
+	kmemleak_free(block);
 
 	sp = slob_page(block);
 	if (is_slob_page(sp)) {
@@ -581,12 +587,14 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
 	} else if (flags & SLAB_PANIC)
 		panic("Cannot create slab cache %s\n", name);
 
+	kmemleak_alloc(c, sizeof(struct kmem_cache), 1, GFP_KERNEL);
 	return c;
 }
 EXPORT_SYMBOL(kmem_cache_create);
 
 void kmem_cache_destroy(struct kmem_cache *c)
 {
+	kmemleak_free(c);
 	slob_free(c, sizeof(struct kmem_cache));
 }
 EXPORT_SYMBOL(kmem_cache_destroy);
@@ -610,6 +618,7 @@ void *kmem_cache_alloc_node(struct kmem_cache *c, gfp_t flags, int node)
 	if (c->ctor)
 		c->ctor(b);
 
+	kmemleak_alloc_recursive(b, c->size, 1, c->flags, flags);
 	return b;
 }
 EXPORT_SYMBOL(kmem_cache_alloc_node);
@@ -632,6 +641,7 @@ static void kmem_rcu_free(struct rcu_head *head)
 
 void kmem_cache_free(struct kmem_cache *c, void *b)
 {
+	kmemleak_free_recursive(b, c->flags);
 	if (unlikely(c->flags & SLAB_DESTROY_BY_RCU)) {
 		struct slob_rcu *slob_rcu;
 		slob_rcu = b + (c->size - sizeof(struct slob_rcu));
diff --git a/mm/slub.c b/mm/slub.c
index 7ab54ecbd3f..30354bfeb43 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
 #include <linux/module.h>
 #include <linux/bit_spinlock.h>
 #include <linux/interrupt.h>
@@ -16,9 +17,10 @@
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <trace/kmemtrace.h>
+#include <linux/kmemtrace.h>
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
+#include <linux/kmemleak.h>
 #include <linux/mempolicy.h>
 #include <linux/ctype.h>
 #include <linux/debugobjects.h>
@@ -142,7 +144,7 @@
  * Set of flags that will prevent slab merging
  */
 #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
-		SLAB_TRACE | SLAB_DESTROY_BY_RCU)
+		SLAB_TRACE | SLAB_DESTROY_BY_RCU | SLAB_NOLEAKTRACE)
 
 #define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \
 		SLAB_CACHE_DMA)
@@ -176,6 +178,12 @@ static enum {
 	SYSFS		/* Sysfs up */
 } slab_state = DOWN;
 
+/*
+ * The slab allocator is initialized with interrupts disabled. Therefore, make
+ * sure early boot allocations don't accidentally enable interrupts.
+ */
+static gfp_t slab_gfp_mask __read_mostly = SLAB_GFP_BOOT_MASK;
+
 /* A list of all slab caches on the system */
 static DECLARE_RWSEM(slub_lock);
 static LIST_HEAD(slab_caches);
@@ -1170,6 +1178,8 @@ static void __free_slab(struct kmem_cache *s, struct page *page)
 
 	__ClearPageSlab(page);
 	reset_page_mapcount(page);
+	if (current->reclaim_state)
+		current->reclaim_state->reclaimed_slab += pages;
 	__free_pages(page, order);
 }
 
@@ -1591,6 +1601,8 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,
 	unsigned long flags;
 	unsigned int objsize;
 
+	gfpflags &= slab_gfp_mask;
+
 	lockdep_trace_alloc(gfpflags);
 	might_sleep_if(gfpflags & __GFP_WAIT);
 
@@ -1614,6 +1626,7 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,
 	if (unlikely((gfpflags & __GFP_ZERO) && object))
 		memset(object, 0, objsize);
 
+	kmemleak_alloc_recursive(object, objsize, 1, s->flags, gfpflags);
 	return object;
 }
 
@@ -1743,6 +1756,7 @@ static __always_inline void slab_free(struct kmem_cache *s,
 	struct kmem_cache_cpu *c;
 	unsigned long flags;
 
+	kmemleak_free_recursive(x, s->flags);
 	local_irq_save(flags);
 	c = get_cpu_slab(s, smp_processor_id());
 	debug_check_no_locks_freed(object, c->objsize);
@@ -1909,7 +1923,7 @@ static inline int calculate_order(int size)
 	 * Doh this slab cannot be placed using slub_max_order.
 	 */
 	order = slab_order(size, 1, MAX_ORDER, 1);
-	if (order <= MAX_ORDER)
+	if (order < MAX_ORDER)
 		return order;
 	return -ENOSYS;
 }
@@ -2522,6 +2536,7 @@ __setup("slub_min_order=", setup_slub_min_order);
 static int __init setup_slub_max_order(char *str)
 {
 	get_option(&str, &slub_max_order);
+	slub_max_order = min(slub_max_order, MAX_ORDER - 1);
 
 	return 1;
 }
@@ -2553,13 +2568,16 @@ static struct kmem_cache *create_kmalloc_cache(struct kmem_cache *s,
 	if (gfp_flags & SLUB_DMA)
 		flags = SLAB_CACHE_DMA;
 
-	down_write(&slub_lock);
+	/*
+	 * This function is called with IRQs disabled during early-boot on
+	 * single CPU so there's no need to take slub_lock here.
+	 */
 	if (!kmem_cache_open(s, gfp_flags, name, size, ARCH_KMALLOC_MINALIGN,
 								flags, NULL))
 		goto panic;
 
 	list_add(&s->list, &slab_caches);
-	up_write(&slub_lock);
+
 	if (sysfs_slab_add(s))
 		goto panic;
 	return s;
@@ -3017,7 +3035,7 @@ void __init kmem_cache_init(void)
 	 * kmem_cache_open for slab_state == DOWN.
 	 */
 	create_kmalloc_cache(&kmalloc_caches[0], "kmem_cache_node",
-		sizeof(struct kmem_cache_node), GFP_KERNEL);
+		sizeof(struct kmem_cache_node), GFP_NOWAIT);
 	kmalloc_caches[0].refcount = -1;
 	caches++;
 
@@ -3030,16 +3048,16 @@ void __init kmem_cache_init(void)
 	/* Caches that are not of the two-to-the-power-of size */
 	if (KMALLOC_MIN_SIZE <= 64) {
 		create_kmalloc_cache(&kmalloc_caches[1],
-				"kmalloc-96", 96, GFP_KERNEL);
+				"kmalloc-96", 96, GFP_NOWAIT);
 		caches++;
 		create_kmalloc_cache(&kmalloc_caches[2],
-				"kmalloc-192", 192, GFP_KERNEL);
+				"kmalloc-192", 192, GFP_NOWAIT);
 		caches++;
 	}
 
 	for (i = KMALLOC_SHIFT_LOW; i < SLUB_PAGE_SHIFT; i++) {
 		create_kmalloc_cache(&kmalloc_caches[i],
-			"kmalloc", 1 << i, GFP_KERNEL);
+			"kmalloc", 1 << i, GFP_NOWAIT);
 		caches++;
 	}
 
@@ -3076,7 +3094,7 @@ void __init kmem_cache_init(void)
 	/* Provide the correct kmalloc names now that the caches are up */
 	for (i = KMALLOC_SHIFT_LOW; i < SLUB_PAGE_SHIFT; i++)
 		kmalloc_caches[i]. name =
-			kasprintf(GFP_KERNEL, "kmalloc-%d", 1 << i);
+			kasprintf(GFP_NOWAIT, "kmalloc-%d", 1 << i);
 
 #ifdef CONFIG_SMP
 	register_cpu_notifier(&slab_notifier);
@@ -3094,6 +3112,14 @@ void __init kmem_cache_init(void)
 		nr_cpu_ids, nr_node_ids);
 }
 
+void __init kmem_cache_init_late(void)
+{
+	/*
+	 * Interrupts are enabled now so all GFP allocations are safe.
+	 */
+	slab_gfp_mask = __GFP_BITS_MASK;
+}
+
 /*
  * Find a mergeable slab cache
  */
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 3ecea98ecb4..1416e7e9e02 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -109,8 +109,6 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
  */
 void __delete_from_swap_cache(struct page *page)
 {
-	swp_entry_t ent = {.val = page_private(page)};
-
 	VM_BUG_ON(!PageLocked(page));
 	VM_BUG_ON(!PageSwapCache(page));
 	VM_BUG_ON(PageWriteback(page));
@@ -121,7 +119,6 @@ void __delete_from_swap_cache(struct page *page)
 	total_swapcache_pages--;
 	__dec_zone_page_state(page, NR_FILE_PAGES);
 	INC_CACHE_INFO(del_total);
-	mem_cgroup_uncharge_swapcache(page, ent);
 }
 
 /**
@@ -191,6 +188,7 @@ void delete_from_swap_cache(struct page *page)
 	__delete_from_swap_cache(page);
 	spin_unlock_irq(&swapper_space.tree_lock);
 
+	mem_cgroup_uncharge_swapcache(page, entry);
 	swap_free(entry);
 	page_cache_release(page);
 }
diff --git a/mm/truncate.c b/mm/truncate.c
index 55206fab7b9..12e1579f916 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -359,6 +359,7 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page)
 	BUG_ON(page_has_private(page));
 	__remove_from_page_cache(page);
 	spin_unlock_irq(&mapping->tree_lock);
+	mem_cgroup_uncharge_cache_page(page);
 	page_cache_release(page);	/* pagecache ref */
 	return 1;
 failed:
diff --git a/mm/util.c b/mm/util.c
index 55bef160b9f..abc65aa7cdf 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -4,9 +4,11 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/sched.h>
-#include <linux/tracepoint.h>
 #include <asm/uaccess.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/kmem.h>
+
 /**
  * kstrdup - allocate space for and copy an existing string
  * @s: the string to duplicate
@@ -255,13 +257,6 @@ int __attribute__((weak)) get_user_pages_fast(unsigned long start,
 EXPORT_SYMBOL_GPL(get_user_pages_fast);
 
 /* Tracepoints definitions. */
-DEFINE_TRACE(kmalloc);
-DEFINE_TRACE(kmem_cache_alloc);
-DEFINE_TRACE(kmalloc_node);
-DEFINE_TRACE(kmem_cache_alloc_node);
-DEFINE_TRACE(kfree);
-DEFINE_TRACE(kmem_cache_free);
-
 EXPORT_TRACEPOINT_SYMBOL(kmalloc);
 EXPORT_TRACEPOINT_SYMBOL(kmem_cache_alloc);
 EXPORT_TRACEPOINT_SYMBOL(kmalloc_node);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 083716ea38c..f8189a4b3e1 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -23,8 +23,8 @@
 #include <linux/rbtree.h>
 #include <linux/radix-tree.h>
 #include <linux/rcupdate.h>
-#include <linux/bootmem.h>
 #include <linux/pfn.h>
+#include <linux/kmemleak.h>
 
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
@@ -1032,7 +1032,7 @@ void __init vmalloc_init(void)
 
 	/* Import existing vmlist entries. */
 	for (tmp = vmlist; tmp; tmp = tmp->next) {
-		va = alloc_bootmem(sizeof(struct vmap_area));
+		va = kzalloc(sizeof(struct vmap_area), GFP_NOWAIT);
 		va->flags = tmp->flags | VM_VM_AREA;
 		va->va_start = (unsigned long)tmp->addr;
 		va->va_end = va->va_start + tmp->size;
@@ -1327,6 +1327,9 @@ static void __vunmap(const void *addr, int deallocate_pages)
 void vfree(const void *addr)
 {
 	BUG_ON(in_interrupt());
+
+	kmemleak_free(addr);
+
 	__vunmap(addr, 1);
 }
 EXPORT_SYMBOL(vfree);
@@ -1439,8 +1442,17 @@ fail:
 
 void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot)
 {
-	return __vmalloc_area_node(area, gfp_mask, prot, -1,
-					__builtin_return_address(0));
+	void *addr = __vmalloc_area_node(area, gfp_mask, prot, -1,
+					 __builtin_return_address(0));
+
+	/*
+	 * A ref_count = 3 is needed because the vm_struct and vmap_area
+	 * structures allocated in the __get_vm_area_node() function contain
+	 * references to the virtual address of the vmalloc'ed block.
+	 */
+	kmemleak_alloc(addr, area->size - PAGE_SIZE, 3, gfp_mask);
+
+	return addr;
 }
 
 /**
@@ -1459,6 +1471,8 @@ static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
 						int node, void *caller)
 {
 	struct vm_struct *area;
+	void *addr;
+	unsigned long real_size = size;
 
 	size = PAGE_ALIGN(size);
 	if (!size || (size >> PAGE_SHIFT) > num_physpages)
@@ -1470,7 +1484,16 @@ static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
 	if (!area)
 		return NULL;
 
-	return __vmalloc_area_node(area, gfp_mask, prot, node, caller);
+	addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller);
+
+	/*
+	 * A ref_count = 3 is needed because the vm_struct and vmap_area
+	 * structures allocated in the __get_vm_area_node() function contain
+	 * references to the virtual address of the vmalloc'ed block.
+	 */
+	kmemleak_alloc(addr, real_size, 3, gfp_mask);
+
+	return addr;
 }
 
 void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 5fa3eda1f03..95c08a8cc2b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -470,10 +470,12 @@ static int __remove_mapping(struct address_space *mapping, struct page *page)
 		swp_entry_t swap = { .val = page_private(page) };
 		__delete_from_swap_cache(page);
 		spin_unlock_irq(&mapping->tree_lock);
+		mem_cgroup_uncharge_swapcache(page, swap);
 		swap_free(swap);
 	} else {
 		__remove_from_page_cache(page);
 		spin_unlock_irq(&mapping->tree_lock);
+		mem_cgroup_uncharge_cache_page(page);
 	}
 
 	return 1;
@@ -2054,7 +2056,7 @@ unsigned long global_lru_pages(void)
 		+ global_page_state(NR_INACTIVE_FILE);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_HIBERNATION
 /*
  * Helper function for shrink_all_memory().  Tries to reclaim 'nr_pages' pages
  * from LRU lists system-wide, for given pass and priority.
@@ -2194,7 +2196,7 @@ out:
 
 	return sc.nr_reclaimed;
 }
-#endif
+#endif /* CONFIG_HIBERNATION */
 
 /* It's optimal to keep kswapds on the same CPUs as their memory, but
    not required for correctness.  So if the last cpu in a node goes
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 66f6130976c..74d66dba0cb 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -509,22 +509,11 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m,
 			continue;
 
 		page = pfn_to_page(pfn);
-#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
-		/*
-		 * Ordinarily, memory holes in flatmem still have a valid
-		 * memmap for the PFN range. However, an architecture for
-		 * embedded systems (e.g. ARM) can free up the memmap backing
-		 * holes to save memory on the assumption the memmap is
-		 * never used. The page_zone linkages are then broken even
-		 * though pfn_valid() returns true. Skip the page if the
-		 * linkages are broken. Even if this test passed, the impact
-		 * is that the counters for the movable type are off but
-		 * fragmentation monitoring is likely meaningless on small
-		 * systems.
-		 */
-		if (page_zone(page) != zone)
+
+		/* Watch for unexpected holes punched in the memmap */
+		if (!memmap_valid_within(pfn, page, zone))
 			continue;
-#endif
+
 		mtype = get_pageblock_migratetype(page);
 
 		if (mtype < MIGRATE_TYPES)
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index bb8579a141a..a49484e67e1 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -246,7 +246,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 	chan->vdev = vdev;
 
 	/* We expect one virtqueue, for requests. */
-	chan->vq = vdev->config->find_vq(vdev, 0, req_done);
+	chan->vq = virtio_find_single_vq(vdev, req_done, "requests");
 	if (IS_ERR(chan->vq)) {
 		err = PTR_ERR(chan->vq);
 		goto out_free_vq;
@@ -261,7 +261,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 	return 0;
 
 out_free_vq:
-	vdev->config->del_vq(chan->vq);
+	vdev->config->del_vqs(vdev);
 fail:
 	mutex_lock(&virtio_9p_lock);
 	chan_index--;
@@ -332,7 +332,7 @@ static void p9_virtio_remove(struct virtio_device *vdev)
 	BUG_ON(chan->inuse);
 
 	if (chan->initialized) {
-		vdev->config->del_vq(chan->vq);
+		vdev->config->del_vqs(vdev);
 		chan->initialized = false;
 	}
 }
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 61309b26f27..fa47d5d84f5 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -171,10 +171,8 @@ static void hci_conn_timeout(unsigned long arg)
 	switch (conn->state) {
 	case BT_CONNECT:
 	case BT_CONNECT2:
-		if (conn->type == ACL_LINK)
+		if (conn->type == ACL_LINK && conn->out)
 			hci_acl_connect_cancel(conn);
-		else
-			hci_acl_disconn(conn, 0x13);
 		break;
 	case BT_CONFIG:
 	case BT_CONNECTED:
@@ -292,6 +290,8 @@ int hci_conn_del(struct hci_conn *conn)
 
 	hci_conn_del_sysfs(conn);
 
+	hci_dev_put(hdev);
+
 	return 0;
 }
 
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4e7cb88e5da..184ba0a88ec 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1493,7 +1493,7 @@ static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
-	if (conn) {
+	if (conn && conn->state == BT_CONNECTED) {
 		hci_conn_hold(conn);
 		conn->disc_timeout = HCI_PAIRING_TIMEOUT;
 		hci_conn_put(conn);
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index a05d45eb3ba..95f7a7a544b 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -90,15 +90,14 @@ static void add_conn(struct work_struct *work)
 	struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
 	struct hci_dev *hdev = conn->hdev;
 
-	/* ensure previous del is complete */
-	flush_work(&conn->work_del);
-
 	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
 
 	if (device_add(&conn->dev) < 0) {
 		BT_ERR("Failed to register connection device");
 		return;
 	}
+
+	hci_dev_hold(hdev);
 }
 
 /*
@@ -116,9 +115,6 @@ static void del_conn(struct work_struct *work)
 	struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
 	struct hci_dev *hdev = conn->hdev;
 
-	/* ensure previous add is complete */
-	flush_work(&conn->work_add);
-
 	if (!device_is_registered(&conn->dev))
 		return;
 
@@ -134,6 +130,7 @@ static void del_conn(struct work_struct *work)
 
 	device_del(&conn->dev);
 	put_device(&conn->dev);
+
 	hci_dev_put(hdev);
 }
 
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 30b88777c3d..5ee1a3682bf 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -134,6 +134,10 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
 		if (skb->protocol == htons(ETH_P_PAUSE))
 			goto drop;
 
+		/* If STP is turned off, then forward */
+		if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
+			goto forward;
+
 		if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
 			    NULL, br_handle_local_finish))
 			return NULL;	/* frame consumed by filter */
@@ -141,6 +145,7 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
 			return skb;	/* continue processing */
 	}
 
+forward:
 	switch (p->state) {
 	case BR_STATE_FORWARDING:
 		rhook = rcu_dereference(br_should_route_hook);
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 6e63ec3f1fc..0660515f399 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -297,6 +297,9 @@ void br_topology_change_detection(struct net_bridge *br)
 {
 	int isroot = br_is_root_bridge(br);
 
+	if (br->stp_enabled != BR_KERNEL_STP)
+		return;
+
 	pr_info("%s: topology change detected, %s\n", br->dev->name,
 		isroot ? "propagating" : "sending tcn bpdu");
 
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 9fd0dc3cca9..b75b6cea49d 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -23,7 +23,7 @@
 #include <linux/bitops.h>
 #include <net/genetlink.h>
 
-#include <trace/skb.h>
+#include <trace/events/skb.h>
 
 #include <asm/unaligned.h>
 
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 9cc9f95b109..6d62d4618cf 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -66,9 +66,9 @@
 
    NOTES.
 
-   * The stored value for avbps is scaled by 2^5, so that maximal
-     rate is ~1Gbit, avpps is scaled by 2^10.
-
+   * avbps is scaled by 2^5, avpps is scaled by 2^10.
+   * both values are reported as 32 bit unsigned values. bps can
+     overflow for fast links : max speed being 34360Mbit/sec
    * Minimal interval is HZ/4=250msec (it is the greatest common divisor
      for HZ=100 and HZ=1024 8)), maximal interval
      is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
@@ -86,9 +86,9 @@ struct gen_estimator
 	spinlock_t		*stats_lock;
 	int			ewma_log;
 	u64			last_bytes;
+	u64			avbps;
 	u32			last_packets;
 	u32			avpps;
-	u32			avbps;
 	struct rcu_head		e_rcu;
 	struct rb_node		node;
 };
@@ -115,6 +115,7 @@ static void est_timer(unsigned long arg)
 	rcu_read_lock();
 	list_for_each_entry_rcu(e, &elist[idx].list, list) {
 		u64 nbytes;
+		u64 brate;
 		u32 npackets;
 		u32 rate;
 
@@ -125,9 +126,9 @@ static void est_timer(unsigned long arg)
 
 		nbytes = e->bstats->bytes;
 		npackets = e->bstats->packets;
-		rate = (nbytes - e->last_bytes)<<(7 - idx);
+		brate = (nbytes - e->last_bytes)<<(7 - idx);
 		e->last_bytes = nbytes;
-		e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
+		e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
 		e->rate_est->bps = (e->avbps+0xF)>>5;
 
 		rate = (npackets - e->last_packets)<<(12 - idx);
diff --git a/net/core/net-traces.c b/net/core/net-traces.c
index c8fb45665e4..499a67eaf3a 100644
--- a/net/core/net-traces.c
+++ b/net/core/net-traces.c
@@ -19,11 +19,11 @@
 #include <linux/workqueue.h>
 #include <linux/netlink.h>
 #include <linux/net_dropmon.h>
-#include <trace/skb.h>
 
 #include <asm/unaligned.h>
 #include <asm/bitops.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/skb.h>
 
-DEFINE_TRACE(kfree_skb);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kfree_skb);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index b5873bdff61..64f51eec657 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -175,9 +175,13 @@ static void service_arp_queue(struct netpoll_info *npi)
 void netpoll_poll(struct netpoll *np)
 {
 	struct net_device *dev = np->dev;
-	const struct net_device_ops *ops = dev->netdev_ops;
+	const struct net_device_ops *ops;
+
+	if (!dev || !netif_running(dev))
+		return;
 
-	if (!dev || !netif_running(dev) || !ops->ndo_poll_controller)
+	ops = dev->netdev_ops;
+	if (!ops->ndo_poll_controller)
 		return;
 
 	/* Process pending work on NIC */
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 3779c1438c1..0666a827bc6 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2447,7 +2447,7 @@ static inline void free_SAs(struct pktgen_dev *pkt_dev)
 	if (pkt_dev->cflows) {
 		/* let go of the SAs if we have them */
 		int i = 0;
-		for (;  i < pkt_dev->nflows; i++){
+		for (;  i < pkt_dev->cflows; i++) {
 			struct xfrm_state *x = pkt_dev->flows[i].x;
 			if (x) {
 				xfrm_state_put(x);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d152394b261..c2e4fb8f354 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -65,7 +65,7 @@
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
-#include <trace/skb.h>
+#include <trace/events/skb.h>
 
 #include "kmap_skb.h"
 
@@ -2288,7 +2288,7 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
 next_skb:
 	block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
 
-	if (abs_offset < block_limit) {
+	if (abs_offset < block_limit && !st->frag_data) {
 		*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
 		return block_limit - abs_offset;
 	}
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 9d26a3da37e..5b919f7b45d 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -408,7 +408,7 @@ config INET_XFRM_MODE_BEET
 
 config INET_LRO
 	bool "Large Receive Offload (ipv4/tcp)"
-
+	default y
 	---help---
 	  Support for Large Receive Offload (ipv4/tcp).
 
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index ec0ae490f0b..33c7c85dfe4 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -986,9 +986,12 @@ fib_find_node(struct trie *t, u32 key)
 static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 {
 	int wasfull;
-	t_key cindex, key = tn->key;
+	t_key cindex, key;
 	struct tnode *tp;
 
+	preempt_disable();
+	key = tn->key;
+
 	while (tn != NULL && (tp = node_parent((struct node *)tn)) != NULL) {
 		cindex = tkey_extract_bits(key, tp->pos, tp->bits);
 		wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
@@ -1007,6 +1010,7 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 	if (IS_TNODE(tn))
 		tn = (struct tnode *)resize(t, (struct tnode *)tn);
 
+	preempt_enable();
 	return (struct node *)tn;
 }
 
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 90d22ae0a41..88bf051d0cb 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -139,6 +139,8 @@ __be32 ic_servaddr = NONE;	/* Boot server IP address */
 __be32 root_server_addr = NONE;	/* Address of NFS server */
 u8 root_server_path[256] = { 0, };	/* Path to mount as root */
 
+u32 ic_dev_xid;		/* Device under configuration */
+
 /* vendor class identifier */
 static char vendor_class_identifier[253] __initdata;
 
@@ -932,6 +934,13 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str
 		goto drop_unlock;
 	}
 
+	/* Is it a reply for the device we are configuring? */
+	if (b->xid != ic_dev_xid) {
+		if (net_ratelimit())
+			printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n");
+		goto drop_unlock;
+	}
+
 	/* Parse extensions */
 	if (ext_len >= 4 &&
 	    !memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */
@@ -1115,6 +1124,9 @@ static int __init ic_dynamic(void)
 	get_random_bytes(&timeout, sizeof(timeout));
 	timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM);
 	for (;;) {
+		/* Track the device we are configuring */
+		ic_dev_xid = d->xid;
+
 #ifdef IPCONFIG_BOOTP
 		if (do_bootp && (d->able & IC_BOOTP))
 			ic_bootp_send_if(d, jiffies - start_jiffies);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index c4c60e9f068..28205e5bfa9 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -784,8 +784,8 @@ static void rt_check_expire(void)
 {
 	static unsigned int rover;
 	unsigned int i = rover, goal;
-	struct rtable *rth, **rthp;
-	unsigned long length = 0, samples = 0;
+	struct rtable *rth, *aux, **rthp;
+	unsigned long samples = 0;
 	unsigned long sum = 0, sum2 = 0;
 	u64 mult;
 
@@ -795,9 +795,9 @@ static void rt_check_expire(void)
 	goal = (unsigned int)mult;
 	if (goal > rt_hash_mask)
 		goal = rt_hash_mask + 1;
-	length = 0;
 	for (; goal > 0; goal--) {
 		unsigned long tmo = ip_rt_gc_timeout;
+		unsigned long length;
 
 		i = (i + 1) & rt_hash_mask;
 		rthp = &rt_hash_table[i].chain;
@@ -809,8 +809,10 @@ static void rt_check_expire(void)
 
 		if (*rthp == NULL)
 			continue;
+		length = 0;
 		spin_lock_bh(rt_hash_lock_addr(i));
 		while ((rth = *rthp) != NULL) {
+			prefetch(rth->u.dst.rt_next);
 			if (rt_is_expired(rth)) {
 				*rthp = rth->u.dst.rt_next;
 				rt_free(rth);
@@ -819,33 +821,30 @@ static void rt_check_expire(void)
 			if (rth->u.dst.expires) {
 				/* Entry is expired even if it is in use */
 				if (time_before_eq(jiffies, rth->u.dst.expires)) {
+nofree:
 					tmo >>= 1;
 					rthp = &rth->u.dst.rt_next;
 					/*
-					 * Only bump our length if the hash
-					 * inputs on entries n and n+1 are not
-					 * the same, we only count entries on
+					 * We only count entries on
 					 * a chain with equal hash inputs once
 					 * so that entries for different QOS
 					 * levels, and other non-hash input
 					 * attributes don't unfairly skew
 					 * the length computation
 					 */
-					if ((*rthp == NULL) ||
-					    !compare_hash_inputs(&(*rthp)->fl,
-								 &rth->fl))
-						length += ONE;
+					for (aux = rt_hash_table[i].chain;;) {
+						if (aux == rth) {
+							length += ONE;
+							break;
+						}
+						if (compare_hash_inputs(&aux->fl, &rth->fl))
+							break;
+						aux = aux->u.dst.rt_next;
+					}
 					continue;
 				}
-			} else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) {
-				tmo >>= 1;
-				rthp = &rth->u.dst.rt_next;
-				if ((*rthp == NULL) ||
-				    !compare_hash_inputs(&(*rthp)->fl,
-							 &rth->fl))
-					length += ONE;
-				continue;
-			}
+			} else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout))
+				goto nofree;
 
 			/* Cleanup aged off entries. */
 			*rthp = rth->u.dst.rt_next;
@@ -1068,7 +1067,6 @@ out:	return 0;
 static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp)
 {
 	struct rtable	*rth, **rthp;
-	struct rtable	*rthi;
 	unsigned long	now;
 	struct rtable *cand, **candp;
 	u32 		min_score;
@@ -1088,7 +1086,6 @@ restart:
 	}
 
 	rthp = &rt_hash_table[hash].chain;
-	rthi = NULL;
 
 	spin_lock_bh(rt_hash_lock_addr(hash));
 	while ((rth = *rthp) != NULL) {
@@ -1134,17 +1131,6 @@ restart:
 		chain_length++;
 
 		rthp = &rth->u.dst.rt_next;
-
-		/*
-		 * check to see if the next entry in the chain
-		 * contains the same hash input values as rt.  If it does
-		 * This is where we will insert into the list, instead of
-		 * at the head.  This groups entries that differ by aspects not
-		 * relvant to the hash function together, which we use to adjust
-		 * our chain length
-		 */
-		if (*rthp && compare_hash_inputs(&(*rthp)->fl, &rt->fl))
-			rthi = rth;
 	}
 
 	if (cand) {
@@ -1205,10 +1191,7 @@ restart:
 		}
 	}
 
-	if (rthi)
-		rt->u.dst.rt_next = rthi->u.dst.rt_next;
-	else
-		rt->u.dst.rt_next = rt_hash_table[hash].chain;
+	rt->u.dst.rt_next = rt_hash_table[hash].chain;
 
 #if RT_CACHE_DEBUG >= 2
 	if (rt->u.dst.rt_next) {
@@ -1224,10 +1207,7 @@ restart:
 	 * previous writes to rt are comitted to memory
 	 * before making rt visible to other CPUS.
 	 */
-	if (rthi)
-		rcu_assign_pointer(rthi->u.dst.rt_next, rt);
-	else
-		rcu_assign_pointer(rt_hash_table[hash].chain, rt);
+	rcu_assign_pointer(rt_hash_table[hash].chain, rt);
 
 	spin_unlock_bh(rt_hash_lock_addr(hash));
 	*rp = rt;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 1d7f49c6f0c..7a0f0b27bf1 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1321,6 +1321,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	struct task_struct *user_recv = NULL;
 	int copied_early = 0;
 	struct sk_buff *skb;
+	u32 urg_hole = 0;
 
 	lock_sock(sk);
 
@@ -1532,7 +1533,8 @@ do_prequeue:
 				}
 			}
 		}
-		if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) {
+		if ((flags & MSG_PEEK) &&
+		    (peek_seq - copied - urg_hole != tp->copied_seq)) {
 			if (net_ratelimit())
 				printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n",
 				       current->comm, task_pid_nr(current));
@@ -1553,6 +1555,7 @@ do_prequeue:
 				if (!urg_offset) {
 					if (!sock_flag(sk, SOCK_URGINLINE)) {
 						++*seq;
+						urg_hole++;
 						offset++;
 						used--;
 						if (!used)
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index a453aac91bd..c6743eec9b7 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -158,6 +158,11 @@ void tcp_vegas_cwnd_event(struct sock *sk, enum tcp_ca_event event)
 }
 EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event);
 
+static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp)
+{
+	return  min(tp->snd_ssthresh, tp->snd_cwnd-1);
+}
+
 static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
@@ -221,11 +226,10 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 			 */
 			diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
 
-			if (diff > gamma && tp->snd_ssthresh > 2 ) {
+			if (diff > gamma && tp->snd_cwnd <= tp->snd_ssthresh) {
 				/* Going too fast. Time to slow down
 				 * and switch to congestion avoidance.
 				 */
-				tp->snd_ssthresh = 2;
 
 				/* Set cwnd to match the actual rate
 				 * exactly:
@@ -235,6 +239,7 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 				 * utilization.
 				 */
 				tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
+				tp->snd_ssthresh = tcp_vegas_ssthresh(tp);
 
 			} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
 				/* Slow start.  */
@@ -250,6 +255,8 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 					 * we slow down.
 					 */
 					tp->snd_cwnd--;
+					tp->snd_ssthresh
+						= tcp_vegas_ssthresh(tp);
 				} else if (diff < alpha) {
 					/* We don't have enough extra packets
 					 * in the network, so speed up.
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ca8cb326d1d..ead6c7a42f4 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -168,7 +168,7 @@ config IPV6_SIT
 	  into IPv4 packets. This is useful if you want to connect two IPv6
 	  networks over an IPv4-only path.
 
-	  Saying M here will produce a module called sit.ko. If unsure, say Y.
+	  Saying M here will produce a module called sit. If unsure, say Y.
 
 config IPV6_NDISC_NODETYPE
 	bool
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a8218bc1806..597487ae6ce 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2765,7 +2765,7 @@ static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags)
 		spin_unlock_bh(&ifp->lock);
 		read_unlock_bh(&idev->lock);
 		/*
-		 * If the defice is not ready:
+		 * If the device is not ready:
 		 * - keep it tentative if it is a permanent address.
 		 * - otherwise, kill it.
 		 */
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 1394ddb6e35..032a5ec391c 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -137,6 +137,7 @@ static struct rt6_info ip6_null_entry_template = {
 		}
 	},
 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
+	.rt6i_protocol  = RTPROT_KERNEL,
 	.rt6i_metric	= ~(u32) 0,
 	.rt6i_ref	= ATOMIC_INIT(1),
 };
@@ -159,6 +160,7 @@ static struct rt6_info ip6_prohibit_entry_template = {
 		}
 	},
 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
+	.rt6i_protocol  = RTPROT_KERNEL,
 	.rt6i_metric	= ~(u32) 0,
 	.rt6i_ref	= ATOMIC_INIT(1),
 };
@@ -176,6 +178,7 @@ static struct rt6_info ip6_blk_hole_entry_template = {
 		}
 	},
 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
+	.rt6i_protocol  = RTPROT_KERNEL,
 	.rt6i_metric	= ~(u32) 0,
 	.rt6i_ref	= ATOMIC_INIT(1),
 };
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 70df3dcc3cf..d9233ec5061 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -477,7 +477,7 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
 
 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
 		sband = hw->wiphy->bands[i];
-		if (sband->n_bitrates > max_rates)
+		if (sband && sband->n_bitrates > max_rates)
 			max_rates = sband->n_bitrates;
 	}
 
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 01d59a8e334..8bef9a1262f 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -378,7 +378,7 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
 
 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
 		sband = hw->wiphy->bands[i];
-		if (sband->n_bitrates > max_rates)
+		if (sband && sband->n_bitrates > max_rates)
 			max_rates = sband->n_bitrates;
 	}
 
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index cb3ad741ebf..c26a20c58dd 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_CONNMARK.ko.  If unsure, say `N'.
+	  ipt_CONNMARK.  If unsure, say `N'.
 
 config NETFILTER_XT_TARGET_CONNSECMARK
 	tristate '"CONNSECMARK" target support'
@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_connmark.ko.  If unsure, say `N'.
+	  ipt_connmark.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNTRACK
 	tristate '"conntrack" connection tracking match support'
diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c
index 9fe8982bd7c..4a1d94aac20 100644
--- a/net/netfilter/nf_conntrack_acct.c
+++ b/net/netfilter/nf_conntrack_acct.c
@@ -116,7 +116,7 @@ int nf_conntrack_acct_init(struct net *net)
 	if (net_eq(net, &init_net)) {
 #ifdef CONFIG_NF_CT_ACCT
 	printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use\n");
-		printk(KERN_WARNING "nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or\n");
+		printk(KERN_WARNING "nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or\n");
 		printk(KERN_WARNING "sysctl net.netfilter.nf_conntrack_acct=1 to enable it.\n");
 #endif
 
diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c
index 8e757dd5339..aee0d6bea30 100644
--- a/net/netfilter/nf_conntrack_proto_dccp.c
+++ b/net/netfilter/nf_conntrack_proto_dccp.c
@@ -22,6 +22,7 @@
 #include <linux/netfilter/nfnetlink_conntrack.h>
 #include <net/netfilter/nf_conntrack.h>
 #include <net/netfilter/nf_conntrack_l4proto.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
 #include <net/netfilter/nf_log.h>
 
 static DEFINE_RWLOCK(dccp_lock);
@@ -553,6 +554,9 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 	ct->proto.dccp.state = new_state;
 	write_unlock_bh(&dccp_lock);
 
+	if (new_state != old_state)
+		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
+
 	dn = dccp_pernet(net);
 	nf_ct_refresh_acct(ct, ctinfo, skb, dn->dccp_timeout[new_state]);
 
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index b5ccf2b4b2e..97a6e93d742 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -634,6 +634,14 @@ static bool tcp_in_window(const struct nf_conn *ct,
 			sender->td_end = end;
 			sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
 		}
+		if (tcph->ack) {
+			if (!(sender->flags & IP_CT_TCP_FLAG_MAXACK_SET)) {
+				sender->td_maxack = ack;
+				sender->flags |= IP_CT_TCP_FLAG_MAXACK_SET;
+			} else if (after(ack, sender->td_maxack))
+				sender->td_maxack = ack;
+		}
+
 		/*
 		 * Update receiver data.
 		 */
@@ -919,6 +927,16 @@ static int tcp_packet(struct nf_conn *ct,
 		return -NF_ACCEPT;
 	case TCP_CONNTRACK_CLOSE:
 		if (index == TCP_RST_SET
+		    && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
+		    && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
+			/* Invalid RST  */
+			write_unlock_bh(&tcp_lock);
+			if (LOG_INVALID(net, IPPROTO_TCP))
+				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
+					  "nf_ct_tcp: invalid RST ");
+			return -NF_ACCEPT;
+		}
+		if (index == TCP_RST_SET
 		    && ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status)
 			 && ct->proto.tcp.last_index == TCP_SYN_SET)
 			|| (!test_bit(IPS_ASSURED_BIT, &ct->status)
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index fd326ac27ec..66a6dd5c519 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -581,6 +581,12 @@ nfulnl_log_packet(u_int8_t pf,
 		+ nla_total_size(sizeof(struct nfulnl_msg_packet_hw))
 		+ nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp));
 
+	if (in && skb_mac_header_was_set(skb)) {
+		size +=   nla_total_size(skb->dev->hard_header_len)
+			+ nla_total_size(sizeof(u_int16_t))	/* hwtype */
+			+ nla_total_size(sizeof(u_int16_t));	/* hwlen */
+	}
+
 	spin_lock_bh(&inst->lock);
 
 	if (inst->flags & NFULNL_CFG_F_SEQ)
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index a5b5369c30f..219dcdbe388 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -926,7 +926,7 @@ static int dl_seq_show(struct seq_file *s, void *v)
 	if (!hlist_empty(&htable->hash[*bucket])) {
 		hlist_for_each_entry(ent, pos, &htable->hash[*bucket], node)
 			if (dl_seq_real_show(ent, htable->family, s))
-				return 1;
+				return -1;
 	}
 	return 0;
 }
diff --git a/net/rxrpc/ar-connection.c b/net/rxrpc/ar-connection.c
index 0f1218b8d28..67e38a05624 100644
--- a/net/rxrpc/ar-connection.c
+++ b/net/rxrpc/ar-connection.c
@@ -343,9 +343,9 @@ static int rxrpc_connect_exclusive(struct rxrpc_sock *rx,
 		/* not yet present - create a candidate for a new connection
 		 * and then redo the check */
 		conn = rxrpc_alloc_connection(gfp);
-		if (IS_ERR(conn)) {
-			_leave(" = %ld", PTR_ERR(conn));
-			return PTR_ERR(conn);
+		if (!conn) {
+			_leave(" = -ENOMEM");
+			return -ENOMEM;
 		}
 
 		conn->trans = trans;
@@ -508,9 +508,9 @@ int rxrpc_connect_call(struct rxrpc_sock *rx,
 		/* not yet present - create a candidate for a new connection and then
 		 * redo the check */
 		candidate = rxrpc_alloc_connection(gfp);
-		if (IS_ERR(candidate)) {
-			_leave(" = %ld", PTR_ERR(candidate));
-			return PTR_ERR(candidate);
+		if (!candidate) {
+			_leave(" = -ENOMEM");
+			return -ENOMEM;
 		}
 
 		candidate->trans = trans;
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 0759f32e9dc..09cdcdfe7e9 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -135,6 +135,7 @@ static int tc_ctl_tfilter(struct sk_buff *skb, struct nlmsghdr *n, void *arg)
 	unsigned long cl;
 	unsigned long fh;
 	int err;
+	int tp_created = 0;
 
 	if (net != &init_net)
 		return -EINVAL;
@@ -266,10 +267,7 @@ replay:
 			goto errout;
 		}
 
-		spin_lock_bh(root_lock);
-		tp->next = *back;
-		*back = tp;
-		spin_unlock_bh(root_lock);
+		tp_created = 1;
 
 	} else if (tca[TCA_KIND] && nla_strcmp(tca[TCA_KIND], tp->ops->kind))
 		goto errout;
@@ -296,8 +294,11 @@ replay:
 		switch (n->nlmsg_type) {
 		case RTM_NEWTFILTER:
 			err = -EEXIST;
-			if (n->nlmsg_flags & NLM_F_EXCL)
+			if (n->nlmsg_flags & NLM_F_EXCL) {
+				if (tp_created)
+					tcf_destroy(tp);
 				goto errout;
+			}
 			break;
 		case RTM_DELTFILTER:
 			err = tp->ops->delete(tp, fh);
@@ -314,8 +315,18 @@ replay:
 	}
 
 	err = tp->ops->change(tp, cl, t->tcm_handle, tca, &fh);
-	if (err == 0)
+	if (err == 0) {
+		if (tp_created) {
+			spin_lock_bh(root_lock);
+			tp->next = *back;
+			*back = tp;
+			spin_unlock_bh(root_lock);
+		}
 		tfilter_notify(skb, n, tp, fh, RTM_NEWTFILTER);
+	} else {
+		if (tp_created)
+			tcf_destroy(tp);
+	}
 
 errout:
 	if (cl)
diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c
index 91a3db4a76f..e5becb92b3e 100644
--- a/net/sched/cls_cgroup.c
+++ b/net/sched/cls_cgroup.c
@@ -104,8 +104,7 @@ static int cls_cgroup_classify(struct sk_buff *skb, struct tcf_proto *tp,
 			       struct tcf_result *res)
 {
 	struct cls_cgroup_head *head = tp->root;
-	struct cgroup_cls_state *cs;
-	int ret = 0;
+	u32 classid;
 
 	/*
 	 * Due to the nature of the classifier it is required to ignore all
@@ -121,17 +120,18 @@ static int cls_cgroup_classify(struct sk_buff *skb, struct tcf_proto *tp,
 		return -1;
 
 	rcu_read_lock();
-	cs = task_cls_state(current);
-	if (cs->classid && tcf_em_tree_match(skb, &head->ematches, NULL)) {
-		res->classid = cs->classid;
-		res->class = 0;
-		ret = tcf_exts_exec(skb, &head->exts, res);
-	} else
-		ret = -1;
-
+	classid = task_cls_state(current)->classid;
 	rcu_read_unlock();
 
-	return ret;
+	if (!classid)
+		return -1;
+
+	if (!tcf_em_tree_match(skb, &head->ematches, NULL))
+		return -1;
+
+	res->classid = classid;
+	res->class = 0;
+	return tcf_exts_exec(skb, &head->exts, res);
 }
 
 static unsigned long cls_cgroup_get(struct tcf_proto *tp, u32 handle)
@@ -167,6 +167,9 @@ static int cls_cgroup_change(struct tcf_proto *tp, unsigned long base,
 	struct tcf_exts e;
 	int err;
 
+	if (!tca[TCA_OPTIONS])
+		return -EINVAL;
+
 	if (head == NULL) {
 		if (!handle)
 			return -EINVAL;
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index ec697cebb63..3b641829723 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -303,6 +303,8 @@ restart:
 		switch (teql_resolve(skb, skb_res, slave)) {
 		case 0:
 			if (__netif_tx_trylock(slave_txq)) {
+				unsigned int length = qdisc_pkt_len(skb);
+
 				if (!netif_tx_queue_stopped(slave_txq) &&
 				    !netif_tx_queue_frozen(slave_txq) &&
 				    slave_ops->ndo_start_xmit(skb, slave) == 0) {
@@ -310,8 +312,7 @@ restart:
 					master->slaves = NEXT_SLAVE(q);
 					netif_wake_queue(dev);
 					master->stats.tx_packets++;
-					master->stats.tx_bytes +=
-						qdisc_pkt_len(skb);
+					master->stats.tx_bytes += length;
 					return 0;
 				}
 				__netif_tx_unlock(slave_txq);
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index af3198814c1..9d504234af4 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -345,6 +345,7 @@ static void svc_sock_setbufsize(struct socket *sock, unsigned int snd,
 	lock_sock(sock->sk);
 	sock->sk->sk_sndbuf = snd * 2;
 	sock->sk->sk_rcvbuf = rcv * 2;
+	sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
 	release_sock(sock->sk);
 #endif
 }
@@ -796,6 +797,23 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp)
 		test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
 		test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
 
+	if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
+		/* sndbuf needs to have room for one request
+		 * per thread, otherwise we can stall even when the
+		 * network isn't a bottleneck.
+		 *
+		 * We count all threads rather than threads in a
+		 * particular pool, which provides an upper bound
+		 * on the number of threads which will access the socket.
+		 *
+		 * rcvbuf just needs to be able to hold a few requests.
+		 * Normally they will be removed from the queue
+		 * as soon a a complete request arrives.
+		 */
+		svc_sock_setbufsize(svsk->sk_sock,
+				    (serv->sv_nrthreads+3) * serv->sv_max_mesg,
+				    3 * serv->sv_max_mesg);
+
 	clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
 
 	/* Receive data. If we haven't got the record length yet, get
@@ -1043,6 +1061,15 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv)
 
 		tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
 
+		/* initialise setting must have enough space to
+		 * receive and respond to one request.
+		 * svc_tcp_recvfrom will re-adjust if necessary
+		 */
+		svc_sock_setbufsize(svsk->sk_sock,
+				    3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
+				    3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
+
+		set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
 		set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
 		if (sk->sk_state != TCP_ESTABLISHED)
 			set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
@@ -1112,14 +1139,8 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
 	/* Initialize the socket */
 	if (sock->type == SOCK_DGRAM)
 		svc_udp_init(svsk, serv);
-	else {
-		/* initialise setting must have enough space to
-		 * receive and respond to one request.
-		 */
-		svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg,
-					4 * serv->sv_max_mesg);
+	else
 		svc_tcp_init(svsk, serv);
-	}
 
 	dprintk("svc: svc_setup_socket created %p (inet %p)\n",
 				svsk, svsk->sk_sk);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 8b510c5e877..f11be72a1a8 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -128,7 +128,8 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt,
 		page_bytes -= sge_bytes;
 
 		frmr->page_list->page_list[page_no] =
-			ib_dma_map_page(xprt->sc_cm_id->device, page, 0,
+			ib_dma_map_single(xprt->sc_cm_id->device,
+					  page_address(page),
 					  PAGE_SIZE, DMA_TO_DEVICE);
 		if (ib_dma_mapping_error(xprt->sc_cm_id->device,
 					 frmr->page_list->page_list[page_no]))
@@ -532,18 +533,17 @@ static int send_reply(struct svcxprt_rdma *rdma,
 		clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags);
 
 	/* Prepare the SGE for the RPCRDMA Header */
+	ctxt->sge[0].lkey = rdma->sc_dma_lkey;
+	ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
 	ctxt->sge[0].addr =
-		ib_dma_map_page(rdma->sc_cm_id->device,
-				page, 0, PAGE_SIZE, DMA_TO_DEVICE);
+		ib_dma_map_single(rdma->sc_cm_id->device, page_address(page),
+				  ctxt->sge[0].length, DMA_TO_DEVICE);
 	if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr))
 		goto err;
 	atomic_inc(&rdma->sc_dma_used);
 
 	ctxt->direction = DMA_TO_DEVICE;
 
-	ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
-	ctxt->sge[0].lkey = rdma->sc_dma_lkey;
-
 	/* Determine how many of our SGE are to be transmitted */
 	for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) {
 		sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 4b0c2fa15e0..5151f9f6c57 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -500,8 +500,8 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt)
 		BUG_ON(sge_no >= xprt->sc_max_sge);
 		page = svc_rdma_get_page();
 		ctxt->pages[sge_no] = page;
-		pa = ib_dma_map_page(xprt->sc_cm_id->device,
-				     page, 0, PAGE_SIZE,
+		pa = ib_dma_map_single(xprt->sc_cm_id->device,
+				     page_address(page), PAGE_SIZE,
 				     DMA_FROM_DEVICE);
 		if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa))
 			goto err_put_ctxt;
@@ -1315,8 +1315,8 @@ void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
 	length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va);
 
 	/* Prepare SGE for local address */
-	sge.addr = ib_dma_map_page(xprt->sc_cm_id->device,
-				   p, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+	sge.addr = ib_dma_map_single(xprt->sc_cm_id->device,
+				   page_address(p), PAGE_SIZE, DMA_FROM_DEVICE);
 	if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) {
 		put_page(p);
 		return;
@@ -1343,7 +1343,7 @@ void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
 	if (ret) {
 		dprintk("svcrdma: Error %d posting send for protocol error\n",
 			ret);
-		ib_dma_unmap_page(xprt->sc_cm_id->device,
+		ib_dma_unmap_single(xprt->sc_cm_id->device,
 				  sge.addr, PAGE_SIZE,
 				  DMA_FROM_DEVICE);
 		svc_rdma_put_context(ctxt, 1);
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 3b21e0cc5e6..465aafc2007 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1495,7 +1495,8 @@ rpcrdma_register_frmr_external(struct rpcrdma_mr_seg *seg,
 	frmr_wr.wr.fast_reg.page_shift = PAGE_SHIFT;
 	frmr_wr.wr.fast_reg.length = i << PAGE_SHIFT;
 	frmr_wr.wr.fast_reg.access_flags = (writing ?
-				IB_ACCESS_REMOTE_WRITE : IB_ACCESS_REMOTE_READ);
+				IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
+				IB_ACCESS_REMOTE_READ);
 	frmr_wr.wr.fast_reg.rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey;
 	DECR_CQCOUNT(&r_xprt->rx_ep);
 
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 08265ca1578..487cb627ddb 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1551,6 +1551,13 @@ static int regulatory_hint_core(const char *alpha2)
 
 	queue_regulatory_request(request);
 
+	/*
+	 * This ensures last_request is populated once modules
+	 * come swinging in and calling regulatory hints and
+	 * wiphy_apply_custom_regulatory().
+	 */
+	flush_scheduled_work();
+
 	return 0;
 }
 
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index cb6a5bb85d8..0e59f9ae9b8 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -786,6 +786,13 @@ static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd,
 			err = -EFAULT;
 			goto out;
 		}
+
+		if (cmd == SIOCSIWENCODEEXT) {
+			struct iw_encode_ext *ee = (void *) extra;
+
+			if (iwp->length < sizeof(*ee) + ee->key_len)
+				return -EFAULT;
+		}
 	}
 
 	err = handler(dev, info, (union iwreq_data *) iwp, extra);
diff --git a/samples/Kconfig b/samples/Kconfig
index 4b02f5a0e65..b75d28cba3f 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -19,6 +19,12 @@ config SAMPLE_TRACEPOINTS
 	help
 	  This build tracepoints example modules.
 
+config SAMPLE_TRACE_EVENTS
+	tristate "Build trace_events examples -- loadable modules only"
+	depends on EVENT_TRACING && m
+	help
+	  This build trace event example modules.
+
 config SAMPLE_KOBJECT
 	tristate "Build kobject examples"
 	help
diff --git a/samples/Makefile b/samples/Makefile
index 10eaca89fe1..13e4b470b53 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -1,3 +1,3 @@
 # Makefile for Linux samples code
 
-obj-$(CONFIG_SAMPLES)	+= markers/ kobject/ kprobes/ tracepoints/
+obj-$(CONFIG_SAMPLES)	+= markers/ kobject/ kprobes/ tracepoints/ trace_events/
diff --git a/samples/trace_events/Makefile b/samples/trace_events/Makefile
new file mode 100644
index 00000000000..0d428dc6728
--- /dev/null
+++ b/samples/trace_events/Makefile
@@ -0,0 +1,6 @@
+# builds the trace events example kernel modules;
+# then to use one (as root):  insmod <module_name.ko>
+
+CFLAGS_trace-events-sample.o := -I$(src)
+
+obj-$(CONFIG_SAMPLE_TRACE_EVENTS) += trace-events-sample.o
diff --git a/samples/trace_events/trace-events-sample.c b/samples/trace_events/trace-events-sample.c
new file mode 100644
index 00000000000..aabc4e97091
--- /dev/null
+++ b/samples/trace_events/trace-events-sample.c
@@ -0,0 +1,52 @@
+#include <linux/module.h>
+#include <linux/kthread.h>
+
+/*
+ * Any file that uses trace points, must include the header.
+ * But only one file, must include the header by defining
+ * CREATE_TRACE_POINTS first.  This will make the C code that
+ * creates the handles for the trace points.
+ */
+#define CREATE_TRACE_POINTS
+#include "trace-events-sample.h"
+
+
+static void simple_thread_func(int cnt)
+{
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(HZ);
+	trace_foo_bar("hello", cnt);
+}
+
+static int simple_thread(void *arg)
+{
+	int cnt = 0;
+
+	while (!kthread_should_stop())
+		simple_thread_func(cnt++);
+
+	return 0;
+}
+
+static struct task_struct *simple_tsk;
+
+static int __init trace_event_init(void)
+{
+	simple_tsk = kthread_run(simple_thread, NULL, "event-sample");
+	if (IS_ERR(simple_tsk))
+		return -1;
+
+	return 0;
+}
+
+static void __exit trace_event_exit(void)
+{
+	kthread_stop(simple_tsk);
+}
+
+module_init(trace_event_init);
+module_exit(trace_event_exit);
+
+MODULE_AUTHOR("Steven Rostedt");
+MODULE_DESCRIPTION("trace-events-sample");
+MODULE_LICENSE("GPL");
diff --git a/samples/trace_events/trace-events-sample.h b/samples/trace_events/trace-events-sample.h
new file mode 100644
index 00000000000..128a897687c
--- /dev/null
+++ b/samples/trace_events/trace-events-sample.h
@@ -0,0 +1,129 @@
+/*
+ * Notice that this file is not protected like a normal header.
+ * We also must allow for rereading of this file. The
+ *
+ *  || defined(TRACE_HEADER_MULTI_READ)
+ *
+ * serves this purpose.
+ */
+#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENT_SAMPLE_H
+
+/*
+ * All trace headers should include tracepoint.h, until we finally
+ * make it into a standard header.
+ */
+#include <linux/tracepoint.h>
+
+/*
+ * If TRACE_SYSTEM is defined, that will be the directory created
+ * in the ftrace directory under /debugfs/tracing/events/<system>
+ *
+ * The define_trace.h belowe will also look for a file name of
+ * TRACE_SYSTEM.h where TRACE_SYSTEM is what is defined here.
+ *
+ * If you want a different system than file name, you can override
+ * the header name by defining TRACE_INCLUDE_FILE
+ *
+ * If this file was called, goofy.h, then we would define:
+ *
+ * #define TRACE_INCLUDE_FILE goofy
+ *
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sample
+
+/*
+ * The TRACE_EVENT macro is broken up into 5 parts.
+ *
+ * name: name of the trace point. This is also how to enable the tracepoint.
+ *   A function called trace_foo_bar() will be created.
+ *
+ * proto: the prototype of the function trace_foo_bar()
+ *   Here it is trace_foo_bar(char *foo, int bar).
+ *
+ * args:  must match the arguments in the prototype.
+ *    Here it is simply "foo, bar".
+ *
+ * struct:  This defines the way the data will be stored in the ring buffer.
+ *    There are currently two types of elements. __field and __array.
+ *    a __field is broken up into (type, name). Where type can be any
+ *    type but an array.
+ *    For an array. there are three fields. (type, name, size). The
+ *    type of elements in the array, the name of the field and the size
+ *    of the array.
+ *
+ *    __array( char, foo, 10) is the same as saying   char foo[10].
+ *
+ * fast_assign: This is a C like function that is used to store the items
+ *    into the ring buffer.
+ *
+ * printk: This is a way to print out the data in pretty print. This is
+ *    useful if the system crashes and you are logging via a serial line,
+ *    the data can be printed to the console using this "printk" method.
+ *
+ * Note, that for both the assign and the printk, __entry is the handler
+ * to the data structure in the ring buffer, and is defined by the
+ * TP_STRUCT__entry.
+ */
+TRACE_EVENT(foo_bar,
+
+	TP_PROTO(char *foo, int bar),
+
+	TP_ARGS(foo, bar),
+
+	TP_STRUCT__entry(
+		__array(	char,	foo,    10		)
+		__field(	int,	bar			)
+	),
+
+	TP_fast_assign(
+		strncpy(__entry->foo, foo, 10);
+		__entry->bar	= bar;
+	),
+
+	TP_printk("foo %s %d", __entry->foo, __entry->bar)
+);
+#endif
+
+/***** NOTICE! The #if protection ends here. *****/
+
+
+/*
+ * There are several ways I could have done this. If I left out the
+ * TRACE_INCLUDE_PATH, then it would default to the kernel source
+ * include/trace/events directory.
+ *
+ * I could specify a path from the define_trace.h file back to this
+ * file.
+ *
+ * #define TRACE_INCLUDE_PATH ../../samples/trace_events
+ *
+ * But I chose to simply make it use the current directory and then in
+ * the Makefile I added:
+ *
+ * CFLAGS_trace-events-sample.o := -I$(PWD)/samples/trace_events/
+ *
+ * This will make sure the current path is part of the include
+ * structure for our file so that we can find it.
+ *
+ * I could have made only the top level directory the include:
+ *
+ * CFLAGS_trace-events-sample.o := -I$(PWD)
+ *
+ * And then let the path to this directory be the TRACE_INCLUDE_PATH:
+ *
+ * #define TRACE_INCLUDE_PATH samples/trace_events
+ *
+ * But then if something defines "samples" or "trace_events" then we
+ * could risk that being converted too, and give us an unexpected
+ * result.
+ */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+/*
+ * TRACE_INCLUDE_FILE is not needed if the filename and TRACE_SYSTEM are equal
+ */
+#define TRACE_INCLUDE_FILE trace-events-sample
+#include <trace/define_trace.h>
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index cba61ca403c..2b706617c89 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -188,20 +188,34 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 # ---------------------------------------------------------------------------
 
 quiet_cmd_gzip = GZIP    $@
-cmd_gzip = gzip -f -9 < $< > $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \
+	(rm -f $@ ; false)
 
 
 # Bzip2
 # ---------------------------------------------------------------------------
 
-# Bzip2 does not include size in file... so we have to fake that
-size_append=$(CONFIG_SHELL) $(srctree)/scripts/bin_size
-
-quiet_cmd_bzip2 = BZIP2    $@
-cmd_bzip2 = (bzip2 -9 < $< && $(size_append) $<) > $@ || (rm -f $@ ; false)
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = echo -ne $(shell						\
+dec_size=0;								\
+for F in $1; do								\
+	fsize=$$(stat -c "%s" $$F);					\
+	dec_size=$$(expr $$dec_size + $$fsize);				\
+done;									\
+printf "%08x" $$dec_size |						\
+	sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'	\
+)
+
+quiet_cmd_bzip2 = BZIP2   $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
 
 # Lzma
 # ---------------------------------------------------------------------------
 
 quiet_cmd_lzma = LZMA    $@
-cmd_lzma = (lzma -9 -c $< && $(size_append) $<) >$@ || (rm -f $@ ; false)
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
diff --git a/scripts/bin_size b/scripts/bin_size
deleted file mode 100644
index 43e1b360cee..00000000000
--- a/scripts/bin_size
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-if [ $# = 0 ] ; then
-   echo Usage: $0 file
-fi
-
-size_dec=`stat -c "%s" $1`
-size_hex_echo_string=`printf "%08x" $size_dec |
-     sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'`
-/bin/echo -ne $size_hex_echo_string
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 60d00d1c4ee..66ad375612f 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -14,6 +14,57 @@ cat << EOF
 #include <asm/types.h>
 #include <asm/unistd.h>
 
+/* *at */
+#define __IGNORE_open		/* openat */
+#define __IGNORE_link		/* linkat */
+#define __IGNORE_unlink		/* unlinkat */
+#define __IGNORE_mknod		/* mknodat */
+#define __IGNORE_chmod		/* fchmodat */
+#define __IGNORE_chown		/* fchownat */
+#define __IGNORE_mkdir		/* mkdirat */
+#define __IGNORE_rmdir		/* unlinkat */
+#define __IGNORE_lchown		/* fchownat */
+#define __IGNORE_access		/* faccessat */
+#define __IGNORE_rename		/* renameat */
+#define __IGNORE_readlink	/* readlinkat */
+#define __IGNORE_symlink	/* symlinkat */
+#define __IGNORE_utimes		/* futimesat */
+#if BITS_PER_LONG == 64
+#define __IGNORE_stat		/* fstatat */
+#define __IGNORE_lstat		/* fstatat */
+#else
+#define __IGNORE_stat64		/* fstatat64 */
+#define __IGNORE_lstat64	/* fstatat64 */
+#endif
+
+/* CLOEXEC flag */
+#define __IGNORE_pipe		/* pipe2 */
+#define __IGNORE_dup2		/* dup3 */
+#define __IGNORE_epoll_create	/* epoll_create1 */
+#define __IGNORE_inotify_init	/* inotify_init1 */
+#define __IGNORE_eventfd	/* eventfd2 */
+#define __IGNORE_signalfd	/* signalfd4 */
+
+/* MMU */
+#ifndef CONFIG_MMU
+#define __IGNORE_madvise
+#define __IGNORE_mbind
+#define __IGNORE_mincore
+#define __IGNORE_mlock
+#define __IGNORE_mlockall
+#define __IGNORE_munlock
+#define __IGNORE_munlockall
+#define __IGNORE_mprotect
+#define __IGNORE_msync
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+#define __IGNORE_remap_file_pages
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_swapoff
+#define __IGNORE_swapon
+#endif
+
 /* System calls for 32-bit kernels only */
 #if BITS_PER_LONG == 64
 #define __IGNORE_sendfile64
@@ -27,6 +78,22 @@ cat << EOF
 #define __IGNORE_fstatat64
 #define __IGNORE_fstatfs64
 #define __IGNORE_statfs64
+#define __IGNORE_llseek
+#define __IGNORE_mmap2
+#else
+#define __IGNORE_sendfile
+#define __IGNORE_ftruncate
+#define __IGNORE_truncate
+#define __IGNORE_stat
+#define __IGNORE_lstat
+#define __IGNORE_fstat
+#define __IGNORE_fcntl
+#define __IGNORE_fadvise64
+#define __IGNORE_newfstatat
+#define __IGNORE_fstatfs
+#define __IGNORE_statfs
+#define __IGNORE_lseek
+#define __IGNORE_mmap
 #endif
 
 /* i386-specific or historical system calls */
@@ -44,7 +111,6 @@ cat << EOF
 #define __IGNORE_idle
 #define __IGNORE_modify_ldt
 #define __IGNORE_ugetrlimit
-#define __IGNORE_mmap2
 #define __IGNORE_vm86
 #define __IGNORE_vm86old
 #define __IGNORE_set_thread_area
@@ -55,7 +121,6 @@ cat << EOF
 #define __IGNORE_oldlstat
 #define __IGNORE_oldolduname
 #define __IGNORE_olduname
-#define __IGNORE_umount2
 #define __IGNORE_umount
 #define __IGNORE_waitpid
 #define __IGNORE_stime
@@ -75,9 +140,12 @@ cat << EOF
 #define __IGNORE__llseek
 #define __IGNORE__newselect
 #define __IGNORE_create_module
-#define __IGNORE_delete_module
 #define __IGNORE_query_module
 #define __IGNORE_get_kernel_syms
+#define __IGNORE_sysfs
+#define __IGNORE_uselib
+#define __IGNORE__sysctl
+
 /* ... including the "new" 32-bit uid syscalls */
 #define __IGNORE_lchown32
 #define __IGNORE_getuid32
@@ -99,6 +167,24 @@ cat << EOF
 #define __IGNORE_setfsuid32
 #define __IGNORE_setfsgid32
 
+/* these can be expressed using other calls */
+#define __IGNORE_alarm		/* setitimer */
+#define __IGNORE_creat		/* open */
+#define __IGNORE_fork		/* clone */
+#define __IGNORE_futimesat	/* utimensat */
+#define __IGNORE_getpgrp	/* getpgid */
+#define __IGNORE_getdents	/* getdents64 */
+#define __IGNORE_pause		/* sigsuspend */
+#define __IGNORE_poll		/* ppoll */
+#define __IGNORE_select		/* pselect6 */
+#define __IGNORE_epoll_wait	/* epoll_pwait */
+#define __IGNORE_time		/* gettimeofday */
+#define __IGNORE_uname		/* newuname */
+#define __IGNORE_ustat		/* statfs */
+#define __IGNORE_utime		/* utimes */
+#define __IGNORE_vfork		/* clone */
+#define __IGNORE_wait4		/* waitid */
+
 /* sync_file_range had a stupid ABI. Allow sync_file_range2 instead */
 #ifdef __NR_sync_file_range2
 #define __IGNORE_sync_file_range
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 3208a3a7e7f..acd8c4a8e3e 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1828,6 +1828,25 @@ sub reset_state {
     $state = 0;
 }
 
+sub tracepoint_munge($) {
+	my $file = shift;
+	my $tracepointname = 0;
+	my $tracepointargs = 0;
+
+	if($prototype =~ m/TRACE_EVENT\((.*?),/) {
+		$tracepointname = $1;
+	}
+	if($prototype =~ m/TP_PROTO\((.*?)\)/) {
+		$tracepointargs = $1;
+	}
+	if (($tracepointname eq 0) || ($tracepointargs eq 0)) {
+		print STDERR "Warning(${file}:$.): Unrecognized tracepoint format: \n".
+			     "$prototype\n";
+	} else {
+		$prototype = "static inline void trace_$tracepointname($tracepointargs)";
+	}
+}
+
 sub syscall_munge() {
 	my $void = 0;
 
@@ -1882,6 +1901,9 @@ sub process_state3_function($$) {
 	if ($prototype =~ /SYSCALL_DEFINE/) {
 		syscall_munge();
 	}
+	if ($prototype =~ /TRACE_EVENT/) {
+		tracepoint_munge($file);
+	}
 	dump_function($prototype, $file);
 	reset_state();
     }
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index a3344285ccf..40e0045876e 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -641,7 +641,7 @@ static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
 	id->vendor = TO_NATIVE(id->vendor);
 
 	strcpy(alias, "virtio:");
-	ADD(alias, "d", 1, id->device);
+	ADD(alias, "d", id->device != VIRTIO_DEV_ANY_ID, id->device);
 	ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor);
 
 	add_wildcard(alias);
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 409596eca12..91033e67321 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -26,7 +26,7 @@
 # which will also be the location of that section after final link.
 # e.g.
 #
-#  .section ".text.sched"
+#  .section ".sched.text", "ax"
 #  .globl my_func
 #  my_func:
 #        [...]
@@ -39,7 +39,7 @@
 #        [...]
 #
 # Both relocation offsets for the mcounts in the above example will be
-# offset from .text.sched. If we make another file called tmp.s with:
+# offset from .sched.text. If we make another file called tmp.s with:
 #
 #  .section __mcount_loc
 #  .quad  my_func + 0x5
@@ -51,7 +51,7 @@
 # But this gets hard if my_func is not globl (a static function).
 # In such a case we have:
 #
-#  .section ".text.sched"
+#  .section ".sched.text", "ax"
 #  my_func:
 #        [...]
 #        call mcount  (offset: 0x5)
@@ -185,6 +185,19 @@ if ($arch eq "x86_64") {
     $objcopy .= " -O elf32-i386";
     $cc .= " -m32";
 
+} elsif ($arch eq "s390" && $bits == 32) {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
+    $alignment = 4;
+    $ld .= " -m elf_s390";
+    $cc .= " -m31";
+
+} elsif ($arch eq "s390" && $bits == 64) {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
+    $alignment = 8;
+    $type = ".quad";
+    $ld .= " -m elf64_s390";
+    $cc .= " -m64";
+
 } elsif ($arch eq "sh") {
     $alignment = 2;
 
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 32c8554f394..00790472f64 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -1,5 +1,13 @@
 #!/bin/sh
-# Print additional version information for non-release trees.
+#
+# This scripts adds local version information from the version
+# control systems git, mercurial (hg) and subversion (svn).
+#
+# If something goes wrong, send a mail the kernel build mailinglist
+# (see MAINTAINERS) and CC Nico Schottelius
+# <nico-linuxsetlocalversion -at- schottelius.org>.
+#
+#
 
 usage() {
 	echo "Usage: $0 [srctree]" >&2
@@ -10,12 +18,20 @@ cd "${1:-.}" || usage
 
 # Check for git and a git repo.
 if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
-	# Do we have an untagged tag?
-	if atag=`git describe 2>/dev/null`; then
-		echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
-	# add -g${head}, if there is no usable tag
-	else
-		printf '%s%s' -g $head
+
+	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
+	# because this version is defined in the top level Makefile.
+	if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+		# If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
+		# we pretty print it.
+		if atag="`git describe 2>/dev/null`"; then
+			echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+		# If we don't have a tag at all we print -g{commitish}.
+		else
+			printf '%s%s' -g $head
+		fi
 	fi
 
 	# Is this git on svn?
diff --git a/security/Kconfig b/security/Kconfig
index bb244774e9d..d23c839038f 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -110,28 +110,8 @@ config SECURITY_ROOTPLUG
 
 	  See <http://www.linuxjournal.com/article.php?sid=6279> for
 	  more information about this module.
-	  
-	  If you are unsure how to answer this question, answer N.
-
-config SECURITY_DEFAULT_MMAP_MIN_ADDR
-        int "Low address space to protect from user allocation"
-        depends on SECURITY
-        default 0
-        help
-	  This is the portion of low virtual memory which should be protected
-	  from userspace allocation.  Keeping a user from writing to low pages
-	  can help reduce the impact of kernel NULL pointer bugs.
-
-	  For most ia64, ppc64 and x86 users with lots of address space
-	  a value of 65536 is reasonable and should cause no problems.
-	  On arm and other archs it should not be higher than 32768.
-	  Programs which use vm86 functionality would either need additional
-	  permissions from either the LSM or the capabilities module or have
-	  this protection disabled.
-
-	  This value can be changed after boot using the
-	  /proc/sys/vm/mmap_min_addr tunable.
 
+	  If you are unsure how to answer this question, answer N.
 
 source security/selinux/Kconfig
 source security/smack/Kconfig
diff --git a/security/Makefile b/security/Makefile
index fa77021d977..c67557cdaa8 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -16,6 +16,9 @@ obj-$(CONFIG_SECURITYFS)		+= inode.o
 # Must precede capability.o in order to stack properly.
 obj-$(CONFIG_SECURITY_SELINUX)		+= selinux/built-in.o
 obj-$(CONFIG_SECURITY_SMACK)		+= smack/built-in.o
+ifeq ($(CONFIG_AUDIT),y)
+obj-$(CONFIG_SECURITY_SMACK)		+= lsm_audit.o
+endif
 obj-$(CONFIG_SECURITY_TOMOYO)		+= tomoyo/built-in.o
 obj-$(CONFIG_SECURITY_ROOTPLUG)		+= root_plug.o
 obj-$(CONFIG_CGROUP_DEVICE)		+= device_cgroup.o
diff --git a/security/commoncap.c b/security/commoncap.c
index beac0258c2a..48b7e0228fa 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -28,6 +28,28 @@
 #include <linux/prctl.h>
 #include <linux/securebits.h>
 
+/*
+ * If a non-root user executes a setuid-root binary in
+ * !secure(SECURE_NOROOT) mode, then we raise capabilities.
+ * However if fE is also set, then the intent is for only
+ * the file capabilities to be applied, and the setuid-root
+ * bit is left on either to change the uid (plausible) or
+ * to get full privilege on a kernel without file capabilities
+ * support.  So in that case we do not raise capabilities.
+ *
+ * Warn if that happens, once per boot.
+ */
+static void warn_setuid_and_fcaps_mixed(char *fname)
+{
+	static int warned;
+	if (!warned) {
+		printk(KERN_INFO "warning: `%s' has both setuid-root and"
+			" effective capabilities. Therefore not raising all"
+			" capabilities.\n", fname);
+		warned = 1;
+	}
+}
+
 int cap_netlink_send(struct sock *sk, struct sk_buff *skb)
 {
 	NETLINK_CB(skb).eff_cap = current_cap();
@@ -464,6 +486,15 @@ int cap_bprm_set_creds(struct linux_binprm *bprm)
 
 	if (!issecure(SECURE_NOROOT)) {
 		/*
+		 * If the legacy file capability is set, then don't set privs
+		 * for a setuid root binary run by a non-root user.  Do set it
+		 * for a root user just to cause least surprise to an admin.
+		 */
+		if (effective && new->uid != 0 && new->euid == 0) {
+			warn_setuid_and_fcaps_mixed(bprm->filename);
+			goto skip;
+		}
+		/*
 		 * To support inheritance of root-permissions and suid-root
 		 * executables under compatibility mode, we override the
 		 * capability sets for the file.
@@ -478,6 +509,7 @@ int cap_bprm_set_creds(struct linux_binprm *bprm)
 		if (new->euid == 0)
 			effective = true;
 	}
+skip:
 
 	/* Don't let someone trace a set[ug]id/setpcap binary with the revised
 	 * credentials unless they have the appropriate permit
diff --git a/security/inode.c b/security/inode.c
index f3b91bfbe4c..f7496c6a022 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -287,7 +287,7 @@ void securityfs_remove(struct dentry *dentry)
 {
 	struct dentry *parent;
 
-	if (!dentry)
+	if (!dentry || IS_ERR(dentry))
 		return;
 
 	parent = dentry->d_parent;
diff --git a/security/integrity/ima/ima_audit.c b/security/integrity/ima/ima_audit.c
index 1e082bb987b..ff513ff737f 100644
--- a/security/integrity/ima/ima_audit.c
+++ b/security/integrity/ima/ima_audit.c
@@ -22,18 +22,9 @@ static int ima_audit;
 static int __init ima_audit_setup(char *str)
 {
 	unsigned long audit;
-	int rc, result = 0;
-	char *op = "ima_audit";
-	char *cause;
 
-	rc = strict_strtoul(str, 0, &audit);
-	if (rc || audit > 1)
-		result = 1;
-	else
-		ima_audit = audit;
-	cause = ima_audit ? "enabled" : "not_enabled";
-	integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL,
-			    op, cause, result, 0);
+	if (!strict_strtoul(str, 0, &audit))
+		ima_audit = audit ? 1 : 0;
 	return 1;
 }
 __setup("ima_audit=", ima_audit_setup);
@@ -50,23 +41,14 @@ void integrity_audit_msg(int audit_msgno, struct inode *inode,
 
 	ab = audit_log_start(current->audit_context, GFP_KERNEL, audit_msgno);
 	audit_log_format(ab, "integrity: pid=%d uid=%u auid=%u ses=%u",
-			 current->pid, current->cred->uid,
+			 current->pid, current_cred()->uid,
 			 audit_get_loginuid(current),
 			 audit_get_sessionid(current));
 	audit_log_task_context(ab);
-	switch (audit_msgno) {
-	case AUDIT_INTEGRITY_DATA:
-	case AUDIT_INTEGRITY_METADATA:
-	case AUDIT_INTEGRITY_PCR:
-	case AUDIT_INTEGRITY_STATUS:
-		audit_log_format(ab, " op=%s cause=%s", op, cause);
-		break;
-	case AUDIT_INTEGRITY_HASH:
-		audit_log_format(ab, " op=%s hash=%s", op, cause);
-		break;
-	default:
-		audit_log_format(ab, " op=%s", op);
-	}
+	audit_log_format(ab, " op=");
+	audit_log_string(ab, op);
+	audit_log_format(ab, " cause=");
+	audit_log_string(ab, cause);
 	audit_log_format(ab, " comm=");
 	audit_log_untrustedstring(ab, current->comm);
 	if (fname) {
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 50d572b74ca..63003a63aae 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -103,7 +103,7 @@ int ima_calc_template_hash(int template_len, void *template, char *digest)
 	return rc;
 }
 
-static void ima_pcrread(int idx, u8 *pcr)
+static void __init ima_pcrread(int idx, u8 *pcr)
 {
 	if (!ima_used_chip)
 		return;
@@ -115,7 +115,7 @@ static void ima_pcrread(int idx, u8 *pcr)
 /*
  * Calculate the boot aggregate hash
  */
-int ima_calc_boot_aggregate(char *digest)
+int __init ima_calc_boot_aggregate(char *digest)
 {
 	struct hash_desc desc;
 	struct scatterlist sg;
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index ffbe259700b..6bfc7eaebfd 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -15,6 +15,7 @@
  *	implemenents security file system for reporting
  *	current measurement list and IMA statistics
  */
+#include <linux/fcntl.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/rculist.h>
@@ -84,8 +85,8 @@ static void *ima_measurements_next(struct seq_file *m, void *v, loff_t *pos)
 	 * against concurrent list-extension
 	 */
 	rcu_read_lock();
-	qe = list_entry(rcu_dereference(qe->later.next),
-			struct ima_queue_entry, later);
+	qe = list_entry_rcu(qe->later.next,
+			    struct ima_queue_entry, later);
 	rcu_read_unlock();
 	(*pos)++;
 
@@ -283,6 +284,9 @@ static atomic_t policy_opencount = ATOMIC_INIT(1);
  */
 int ima_open_policy(struct inode * inode, struct file * filp)
 {
+	/* No point in being allowed to open it if you aren't going to write */
+	if (!(filp->f_flags & O_WRONLY))
+		return -EACCES;
 	if (atomic_dec_and_test(&policy_opencount))
 		return 0;
 	return -EBUSY;
@@ -315,7 +319,7 @@ static struct file_operations ima_measure_policy_ops = {
 	.release = ima_release_policy
 };
 
-int ima_fs_init(void)
+int __init ima_fs_init(void)
 {
 	ima_dir = securityfs_create_dir("ima", NULL);
 	if (IS_ERR(ima_dir))
@@ -349,7 +353,7 @@ int ima_fs_init(void)
 		goto out;
 
 	ima_policy = securityfs_create_file("policy",
-					    S_IRUSR | S_IRGRP | S_IWUSR,
+					    S_IWUSR,
 					    ima_dir, NULL,
 					    &ima_measure_policy_ops);
 	if (IS_ERR(ima_policy))
diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c
index ec79f1ee992..b8dd693f879 100644
--- a/security/integrity/ima/ima_iint.c
+++ b/security/integrity/ima/ima_iint.c
@@ -196,7 +196,7 @@ static void init_once(void *foo)
 	kref_set(&iint->refcount, 1);
 }
 
-void ima_iintcache_init(void)
+void __init ima_iintcache_init(void)
 {
 	iint_cache =
 	    kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0,
diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c
index 0b0bb8c978c..a40da7ae590 100644
--- a/security/integrity/ima/ima_init.c
+++ b/security/integrity/ima/ima_init.c
@@ -38,7 +38,7 @@ int ima_used_chip;
  * a different value.) Violations add a zero entry to the measurement
  * list and extend the aggregate PCR value with ff...ff's.
  */
-static void ima_add_boot_aggregate(void)
+static void __init ima_add_boot_aggregate(void)
 {
 	struct ima_template_entry *entry;
 	const char *op = "add_boot_aggregate";
@@ -71,7 +71,7 @@ err_out:
 			    audit_cause, result, 0);
 }
 
-int ima_init(void)
+int __init ima_init(void)
 {
 	u8 pcr_i[IMA_DIGEST_SIZE];
 	int rc;
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index f4e7266f5ae..6f611874d10 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -29,20 +29,8 @@ int ima_initialized;
 char *ima_hash = "sha1";
 static int __init hash_setup(char *str)
 {
-	const char *op = "hash_setup";
-	const char *hash = "sha1";
-	int result = 0;
-	int audit_info = 0;
-
-	if (strncmp(str, "md5", 3) == 0) {
-		hash = "md5";
-		ima_hash = str;
-	} else if (strncmp(str, "sha1", 4) != 0) {
-		hash = "invalid_hash_type";
-		result = 1;
-	}
-	integrity_audit_msg(AUDIT_INTEGRITY_HASH, NULL, NULL, op, hash,
-			    result, audit_info);
+	if (strncmp(str, "md5", 3) == 0)
+		ima_hash = "md5";
 	return 1;
 }
 __setup("ima_hash=", hash_setup);
@@ -128,10 +116,6 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file,
 {
 	int rc = 0;
 
-	if (IS_ERR(file)) {
-		pr_info("%s dentry_open failed\n", filename);
-		return rc;
-	}
 	iint->opencount++;
 	iint->readcount++;
 
@@ -141,6 +125,15 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file,
 	return rc;
 }
 
+static void ima_update_counts(struct ima_iint_cache *iint, int mask)
+{
+	iint->opencount++;
+	if ((mask & MAY_WRITE) || (mask == 0))
+		iint->writecount++;
+	else if (mask & (MAY_READ | MAY_EXEC))
+		iint->readcount++;
+}
+
 /**
  * ima_path_check - based on policy, collect/store measurement.
  * @path: contains a pointer to the path to be measured
@@ -156,10 +149,10 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file,
  *	- Opening a file for read when already open for write,
  * 	  could result in a file measurement error.
  *
- * Return 0 on success, an error code on failure.
- * (Based on the results of appraise_measurement().)
+ * Always return 0 and audit dentry_open failures.
+ * (Return code will be based upon measurement appraisal.)
  */
-int ima_path_check(struct path *path, int mask)
+int ima_path_check(struct path *path, int mask, int update_counts)
 {
 	struct inode *inode = path->dentry->d_inode;
 	struct ima_iint_cache *iint;
@@ -173,11 +166,8 @@ int ima_path_check(struct path *path, int mask)
 		return 0;
 
 	mutex_lock(&iint->mutex);
-	iint->opencount++;
-	if ((mask & MAY_WRITE) || (mask == 0))
-		iint->writecount++;
-	else if (mask & (MAY_READ | MAY_EXEC))
-		iint->readcount++;
+	if (update_counts)
+		ima_update_counts(iint, mask);
 
 	rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK);
 	if (rc < 0)
@@ -196,7 +186,19 @@ int ima_path_check(struct path *path, int mask)
 		struct dentry *dentry = dget(path->dentry);
 		struct vfsmount *mnt = mntget(path->mnt);
 
-		file = dentry_open(dentry, mnt, O_RDONLY, current->cred);
+		file = dentry_open(dentry, mnt, O_RDONLY | O_LARGEFILE,
+				   current_cred());
+		if (IS_ERR(file)) {
+			int audit_info = 0;
+
+			integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
+					    dentry->d_name.name,
+					    "add_measurement",
+					    "dentry_open failed",
+					    1, audit_info);
+			file = NULL;
+			goto out;
+		}
 		rc = get_path_measurement(iint, file, dentry->d_name.name);
 	}
 out:
@@ -206,6 +208,7 @@ out:
 	kref_put(&iint->refcount, iint_free);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ima_path_check);
 
 static int process_measurement(struct file *file, const unsigned char *filename,
 			       int mask, int function)
@@ -234,7 +237,16 @@ out:
 	return rc;
 }
 
-static void opencount_get(struct file *file)
+/*
+ * ima_opens_get - increment file counts
+ *
+ * - for IPC shm and shmat file.
+ * - for nfsd exported files.
+ *
+ * Increment the counts for these files to prevent unnecessary
+ * imbalance messages.
+ */
+void ima_counts_get(struct file *file)
 {
 	struct inode *inode = file->f_dentry->d_inode;
 	struct ima_iint_cache *iint;
@@ -246,8 +258,14 @@ static void opencount_get(struct file *file)
 		return;
 	mutex_lock(&iint->mutex);
 	iint->opencount++;
+	if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
+		iint->readcount++;
+
+	if (file->f_mode & FMODE_WRITE)
+		iint->writecount++;
 	mutex_unlock(&iint->mutex);
 }
+EXPORT_SYMBOL_GPL(ima_counts_get);
 
 /**
  * ima_file_mmap - based on policy, collect/store measurement.
@@ -272,18 +290,6 @@ int ima_file_mmap(struct file *file, unsigned long prot)
 	return 0;
 }
 
-/*
- * ima_shm_check - IPC shm and shmat create/fput a file
- *
- * Maintain the opencount for these files to prevent unnecessary
- * imbalance messages.
- */
-void ima_shm_check(struct file *file)
-{
-	opencount_get(file);
-	return;
-}
-
 /**
  * ima_bprm_check - based on policy, collect/store measurement.
  * @bprm: contains the linux_binprm structure
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index b5291ad5ef5..e1278399b34 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -45,24 +45,30 @@ struct ima_measure_rule_entry {
 	} lsm[MAX_LSM_RULES];
 };
 
-/* Without LSM specific knowledge, the default policy can only be
+/*
+ * Without LSM specific knowledge, the default policy can only be
  * written in terms of .action, .func, .mask, .fsmagic, and .uid
  */
+
+/*
+ * The minimum rule set to allow for full TCB coverage.  Measures all files
+ * opened or mmap for exec and everything read by root.  Dangerous because
+ * normal users can easily run the machine out of memory simply building
+ * and running executables.
+ */
 static struct ima_measure_rule_entry default_rules[] = {
-	{.action = DONT_MEASURE,.fsmagic = PROC_SUPER_MAGIC,
-	 .flags = IMA_FSMAGIC},
+	{.action = DONT_MEASURE,.fsmagic = PROC_SUPER_MAGIC,.flags = IMA_FSMAGIC},
 	{.action = DONT_MEASURE,.fsmagic = SYSFS_MAGIC,.flags = IMA_FSMAGIC},
 	{.action = DONT_MEASURE,.fsmagic = DEBUGFS_MAGIC,.flags = IMA_FSMAGIC},
 	{.action = DONT_MEASURE,.fsmagic = TMPFS_MAGIC,.flags = IMA_FSMAGIC},
-	{.action = DONT_MEASURE,.fsmagic = SECURITYFS_MAGIC,
-	 .flags = IMA_FSMAGIC},
-	{.action = DONT_MEASURE,.fsmagic = 0xF97CFF8C,.flags = IMA_FSMAGIC},
+	{.action = DONT_MEASURE,.fsmagic = SECURITYFS_MAGIC,.flags = IMA_FSMAGIC},
+	{.action = DONT_MEASURE,.fsmagic = SELINUX_MAGIC,.flags = IMA_FSMAGIC},
 	{.action = MEASURE,.func = FILE_MMAP,.mask = MAY_EXEC,
 	 .flags = IMA_FUNC | IMA_MASK},
 	{.action = MEASURE,.func = BPRM_CHECK,.mask = MAY_EXEC,
 	 .flags = IMA_FUNC | IMA_MASK},
 	{.action = MEASURE,.func = PATH_CHECK,.mask = MAY_READ,.uid = 0,
-	 .flags = IMA_FUNC | IMA_MASK | IMA_UID}
+	 .flags = IMA_FUNC | IMA_MASK | IMA_UID},
 };
 
 static LIST_HEAD(measure_default_rules);
@@ -71,6 +77,14 @@ static struct list_head *ima_measure;
 
 static DEFINE_MUTEX(ima_measure_mutex);
 
+static bool ima_use_tcb __initdata;
+static int __init default_policy_setup(char *str)
+{
+	ima_use_tcb = 1;
+	return 1;
+}
+__setup("ima_tcb", default_policy_setup);
+
 /**
  * ima_match_rules - determine whether an inode matches the measure rule.
  * @rule: a pointer to a rule
@@ -96,7 +110,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule,
 	if ((rule->flags & IMA_UID) && rule->uid != tsk->cred->uid)
 		return false;
 	for (i = 0; i < MAX_LSM_RULES; i++) {
-		int rc;
+		int rc = 0;
 		u32 osid, sid;
 
 		if (!rule->lsm[i].rule)
@@ -109,7 +123,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule,
 			security_inode_getsecid(inode, &osid);
 			rc = security_filter_rule_match(osid,
 							rule->lsm[i].type,
-							AUDIT_EQUAL,
+							Audit_equal,
 							rule->lsm[i].rule,
 							NULL);
 			break;
@@ -119,7 +133,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule,
 			security_task_getsecid(tsk, &sid);
 			rc = security_filter_rule_match(sid,
 							rule->lsm[i].type,
-							AUDIT_EQUAL,
+							Audit_equal,
 							rule->lsm[i].rule,
 							NULL);
 		default:
@@ -164,11 +178,17 @@ int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask)
  * ima_measure points to either the measure_default_rules or the
  * the new measure_policy_rules.
  */
-void ima_init_policy(void)
+void __init ima_init_policy(void)
 {
-	int i;
+	int i, entries;
+
+	/* if !ima_use_tcb set entries = 0 so we load NO default rules */
+	if (ima_use_tcb)
+		entries = ARRAY_SIZE(default_rules);
+	else
+		entries = 0;
 
-	for (i = 0; i < ARRAY_SIZE(default_rules); i++)
+	for (i = 0; i < entries; i++)
 		list_add_tail(&default_rules[i].list, &measure_default_rules);
 	ima_measure = &measure_default_rules;
 }
@@ -227,7 +247,7 @@ static int ima_lsm_rule_init(struct ima_measure_rule_entry *entry,
 
 	entry->lsm[lsm_rule].type = audit_type;
 	result = security_filter_rule_init(entry->lsm[lsm_rule].type,
-					   AUDIT_EQUAL, args,
+					   Audit_equal, args,
 					   &entry->lsm[lsm_rule].rule);
 	return result;
 }
diff --git a/security/lsm_audit.c b/security/lsm_audit.c
new file mode 100644
index 00000000000..94b868494b3
--- /dev/null
+++ b/security/lsm_audit.c
@@ -0,0 +1,386 @@
+/*
+ * common LSM auditing functions
+ *
+ * Based on code written for SELinux by :
+ *			Stephen Smalley, <sds@epoch.ncsc.mil>
+ * 			James Morris <jmorris@redhat.com>
+ * Author : Etienne Basset, <etienne.basset@ensta.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <net/sock.h>
+#include <linux/un.h>
+#include <net/af_unix.h>
+#include <linux/audit.h>
+#include <linux/ipv6.h>
+#include <linux/ip.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/dccp.h>
+#include <linux/sctp.h>
+#include <linux/lsm_audit.h>
+
+/**
+ * ipv4_skb_to_auditdata : fill auditdata from skb
+ * @skb : the skb
+ * @ad : the audit data to fill
+ * @proto : the layer 4 protocol
+ *
+ * return  0 on success
+ */
+int ipv4_skb_to_auditdata(struct sk_buff *skb,
+		struct common_audit_data *ad, u8 *proto)
+{
+	int ret = 0;
+	struct iphdr *ih;
+
+	ih = ip_hdr(skb);
+	if (ih == NULL)
+		return -EINVAL;
+
+	ad->u.net.v4info.saddr = ih->saddr;
+	ad->u.net.v4info.daddr = ih->daddr;
+
+	if (proto)
+		*proto = ih->protocol;
+	/* non initial fragment */
+	if (ntohs(ih->frag_off) & IP_OFFSET)
+		return 0;
+
+	switch (ih->protocol) {
+	case IPPROTO_TCP: {
+		struct tcphdr *th = tcp_hdr(skb);
+		if (th == NULL)
+			break;
+
+		ad->u.net.sport = th->source;
+		ad->u.net.dport = th->dest;
+		break;
+	}
+	case IPPROTO_UDP: {
+		struct udphdr *uh = udp_hdr(skb);
+		if (uh == NULL)
+			break;
+
+		ad->u.net.sport = uh->source;
+		ad->u.net.dport = uh->dest;
+		break;
+	}
+	case IPPROTO_DCCP: {
+		struct dccp_hdr *dh = dccp_hdr(skb);
+		if (dh == NULL)
+			break;
+
+		ad->u.net.sport = dh->dccph_sport;
+		ad->u.net.dport = dh->dccph_dport;
+		break;
+	}
+	case IPPROTO_SCTP: {
+		struct sctphdr *sh = sctp_hdr(skb);
+		if (sh == NULL)
+			break;
+		ad->u.net.sport = sh->source;
+		ad->u.net.dport = sh->dest;
+		break;
+	}
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+/**
+ * ipv6_skb_to_auditdata : fill auditdata from skb
+ * @skb : the skb
+ * @ad : the audit data to fill
+ * @proto : the layer 4 protocol
+ *
+ * return  0 on success
+ */
+int ipv6_skb_to_auditdata(struct sk_buff *skb,
+		struct common_audit_data *ad, u8 *proto)
+{
+	int offset, ret = 0;
+	struct ipv6hdr *ip6;
+	u8 nexthdr;
+
+	ip6 = ipv6_hdr(skb);
+	if (ip6 == NULL)
+		return -EINVAL;
+	ipv6_addr_copy(&ad->u.net.v6info.saddr, &ip6->saddr);
+	ipv6_addr_copy(&ad->u.net.v6info.daddr, &ip6->daddr);
+	ret = 0;
+	/* IPv6 can have several extension header before the Transport header
+	 * skip them */
+	offset = skb_network_offset(skb);
+	offset += sizeof(*ip6);
+	nexthdr = ip6->nexthdr;
+	offset = ipv6_skip_exthdr(skb, offset, &nexthdr);
+	if (offset < 0)
+		return 0;
+	if (proto)
+		*proto = nexthdr;
+	switch (nexthdr) {
+	case IPPROTO_TCP: {
+		struct tcphdr _tcph, *th;
+
+		th = skb_header_pointer(skb, offset, sizeof(_tcph), &_tcph);
+		if (th == NULL)
+			break;
+
+		ad->u.net.sport = th->source;
+		ad->u.net.dport = th->dest;
+		break;
+	}
+	case IPPROTO_UDP: {
+		struct udphdr _udph, *uh;
+
+		uh = skb_header_pointer(skb, offset, sizeof(_udph), &_udph);
+		if (uh == NULL)
+			break;
+
+		ad->u.net.sport = uh->source;
+		ad->u.net.dport = uh->dest;
+		break;
+	}
+	case IPPROTO_DCCP: {
+		struct dccp_hdr _dccph, *dh;
+
+		dh = skb_header_pointer(skb, offset, sizeof(_dccph), &_dccph);
+		if (dh == NULL)
+			break;
+
+		ad->u.net.sport = dh->dccph_sport;
+		ad->u.net.dport = dh->dccph_dport;
+		break;
+	}
+	case IPPROTO_SCTP: {
+		struct sctphdr _sctph, *sh;
+
+		sh = skb_header_pointer(skb, offset, sizeof(_sctph), &_sctph);
+		if (sh == NULL)
+			break;
+		ad->u.net.sport = sh->source;
+		ad->u.net.dport = sh->dest;
+		break;
+	}
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+#endif
+
+
+static inline void print_ipv6_addr(struct audit_buffer *ab,
+				   struct in6_addr *addr, __be16 port,
+				   char *name1, char *name2)
+{
+	if (!ipv6_addr_any(addr))
+		audit_log_format(ab, " %s=%pI6", name1, addr);
+	if (port)
+		audit_log_format(ab, " %s=%d", name2, ntohs(port));
+}
+
+static inline void print_ipv4_addr(struct audit_buffer *ab, __be32 addr,
+				   __be16 port, char *name1, char *name2)
+{
+	if (addr)
+		audit_log_format(ab, " %s=%pI4", name1, &addr);
+	if (port)
+		audit_log_format(ab, " %s=%d", name2, ntohs(port));
+}
+
+/**
+ * dump_common_audit_data - helper to dump common audit data
+ * @a : common audit data
+ *
+ */
+static void dump_common_audit_data(struct audit_buffer *ab,
+				   struct common_audit_data *a)
+{
+	struct inode *inode = NULL;
+	struct task_struct *tsk = current;
+
+	if (a->tsk)
+		tsk = a->tsk;
+	if (tsk && tsk->pid) {
+		audit_log_format(ab, " pid=%d comm=", tsk->pid);
+		audit_log_untrustedstring(ab, tsk->comm);
+	}
+
+	switch (a->type) {
+	case LSM_AUDIT_DATA_IPC:
+		audit_log_format(ab, " key=%d ", a->u.ipc_id);
+		break;
+	case LSM_AUDIT_DATA_CAP:
+		audit_log_format(ab, " capability=%d ", a->u.cap);
+		break;
+	case LSM_AUDIT_DATA_FS:
+		if (a->u.fs.path.dentry) {
+			struct dentry *dentry = a->u.fs.path.dentry;
+			if (a->u.fs.path.mnt) {
+				audit_log_d_path(ab, "path=", &a->u.fs.path);
+			} else {
+				audit_log_format(ab, " name=");
+				audit_log_untrustedstring(ab,
+						 dentry->d_name.name);
+			}
+			inode = dentry->d_inode;
+		} else if (a->u.fs.inode) {
+			struct dentry *dentry;
+			inode = a->u.fs.inode;
+			dentry = d_find_alias(inode);
+			if (dentry) {
+				audit_log_format(ab, " name=");
+				audit_log_untrustedstring(ab,
+						 dentry->d_name.name);
+				dput(dentry);
+			}
+		}
+		if (inode)
+			audit_log_format(ab, " dev=%s ino=%lu",
+					inode->i_sb->s_id,
+					inode->i_ino);
+		break;
+	case LSM_AUDIT_DATA_TASK:
+		tsk = a->u.tsk;
+		if (tsk && tsk->pid) {
+			audit_log_format(ab, " pid=%d comm=", tsk->pid);
+			audit_log_untrustedstring(ab, tsk->comm);
+		}
+		break;
+	case LSM_AUDIT_DATA_NET:
+		if (a->u.net.sk) {
+			struct sock *sk = a->u.net.sk;
+			struct unix_sock *u;
+			int len = 0;
+			char *p = NULL;
+
+			switch (sk->sk_family) {
+			case AF_INET: {
+				struct inet_sock *inet = inet_sk(sk);
+
+				print_ipv4_addr(ab, inet->rcv_saddr,
+						inet->sport,
+						"laddr", "lport");
+				print_ipv4_addr(ab, inet->daddr,
+						inet->dport,
+						"faddr", "fport");
+				break;
+			}
+			case AF_INET6: {
+				struct inet_sock *inet = inet_sk(sk);
+				struct ipv6_pinfo *inet6 = inet6_sk(sk);
+
+				print_ipv6_addr(ab, &inet6->rcv_saddr,
+						inet->sport,
+						"laddr", "lport");
+				print_ipv6_addr(ab, &inet6->daddr,
+						inet->dport,
+						"faddr", "fport");
+				break;
+			}
+			case AF_UNIX:
+				u = unix_sk(sk);
+				if (u->dentry) {
+					struct path path = {
+						.dentry = u->dentry,
+						.mnt = u->mnt
+					};
+					audit_log_d_path(ab, "path=", &path);
+					break;
+				}
+				if (!u->addr)
+					break;
+				len = u->addr->len-sizeof(short);
+				p = &u->addr->name->sun_path[0];
+				audit_log_format(ab, " path=");
+				if (*p)
+					audit_log_untrustedstring(ab, p);
+				else
+					audit_log_n_hex(ab, p, len);
+				break;
+			}
+		}
+
+		switch (a->u.net.family) {
+		case AF_INET:
+			print_ipv4_addr(ab, a->u.net.v4info.saddr,
+					a->u.net.sport,
+					"saddr", "src");
+			print_ipv4_addr(ab, a->u.net.v4info.daddr,
+					a->u.net.dport,
+					"daddr", "dest");
+			break;
+		case AF_INET6:
+			print_ipv6_addr(ab, &a->u.net.v6info.saddr,
+					a->u.net.sport,
+					"saddr", "src");
+			print_ipv6_addr(ab, &a->u.net.v6info.daddr,
+					a->u.net.dport,
+					"daddr", "dest");
+			break;
+		}
+		if (a->u.net.netif > 0) {
+			struct net_device *dev;
+
+			/* NOTE: we always use init's namespace */
+			dev = dev_get_by_index(&init_net, a->u.net.netif);
+			if (dev) {
+				audit_log_format(ab, " netif=%s", dev->name);
+				dev_put(dev);
+			}
+		}
+		break;
+#ifdef CONFIG_KEYS
+	case LSM_AUDIT_DATA_KEY:
+		audit_log_format(ab, " key_serial=%u", a->u.key_struct.key);
+		if (a->u.key_struct.key_desc) {
+			audit_log_format(ab, " key_desc=");
+			audit_log_untrustedstring(ab, a->u.key_struct.key_desc);
+		}
+		break;
+#endif
+	} /* switch (a->type) */
+}
+
+/**
+ * common_lsm_audit - generic LSM auditing function
+ * @a:  auxiliary audit data
+ *
+ * setup the audit buffer for common security information
+ * uses callback to print LSM specific information
+ */
+void common_lsm_audit(struct common_audit_data *a)
+{
+	struct audit_buffer *ab;
+
+	if (a == NULL)
+		return;
+	/* we use GFP_ATOMIC so we won't sleep */
+	ab = audit_log_start(current->audit_context, GFP_ATOMIC, AUDIT_AVC);
+
+	if (ab == NULL)
+		return;
+
+	if (a->lsm_pre_audit)
+		a->lsm_pre_audit(ab, a);
+
+	dump_common_audit_data(ab, a);
+
+	if (a->lsm_post_audit)
+		a->lsm_post_audit(ab, a);
+
+	audit_log_end(ab);
+}
diff --git a/security/root_plug.c b/security/root_plug.c
index 40fb4f15e27..2f7ffa67c4d 100644
--- a/security/root_plug.c
+++ b/security/root_plug.c
@@ -71,18 +71,6 @@ static int rootplug_bprm_check_security (struct linux_binprm *bprm)
 }
 
 static struct security_operations rootplug_security_ops = {
-	/* Use the capability functions for some of the hooks */
-	.ptrace_may_access =		cap_ptrace_may_access,
-	.ptrace_traceme =		cap_ptrace_traceme,
-	.capget =			cap_capget,
-	.capset =			cap_capset,
-	.capable =			cap_capable,
-
-	.bprm_set_creds =		cap_bprm_set_creds,
-
-	.task_fix_setuid =		cap_task_fix_setuid,
-	.task_prctl =			cap_task_prctl,
-
 	.bprm_check_security =		rootplug_bprm_check_security,
 };
 
diff --git a/security/security.c b/security/security.c
index 5284255c5cd..dc7674fbfc7 100644
--- a/security/security.c
+++ b/security/security.c
@@ -26,9 +26,6 @@ extern void security_fixup_ops(struct security_operations *ops);
 
 struct security_operations *security_ops;	/* Initialized to NULL */
 
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR;
-
 static inline int verify(struct security_operations *ops)
 {
 	/* verify the security_operations structure exists */
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 7f9b5fac877..b2ab6085983 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -927,7 +927,7 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid,
 	if (denied) {
 		if (flags & AVC_STRICT)
 			rc = -EACCES;
-		else if (!selinux_enforcing || security_permissive_sid(ssid))
+		else if (!selinux_enforcing || (avd->flags & AVD_FLAGS_PERMISSIVE))
 			avc_update_node(AVC_CALLBACK_GRANT, requested, ssid,
 					tsid, tclass, avd->seqno);
 		else
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 2fcad7c33ea..195906bce26 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1980,10 +1980,6 @@ static int selinux_sysctl(ctl_table *table, int op)
 	u32 tsid, sid;
 	int rc;
 
-	rc = secondary_ops->sysctl(table, op);
-	if (rc)
-		return rc;
-
 	sid = current_sid();
 
 	rc = selinux_sysctl_get_sid(table, (op == 0001) ?
@@ -2375,10 +2371,8 @@ static void selinux_bprm_committed_creds(struct linux_binprm *bprm)
 {
 	const struct task_security_struct *tsec = current_security();
 	struct itimerval itimer;
-	struct sighand_struct *psig;
 	u32 osid, sid;
 	int rc, i;
-	unsigned long flags;
 
 	osid = tsec->osid;
 	sid = tsec->sid;
@@ -2398,22 +2392,20 @@ static void selinux_bprm_committed_creds(struct linux_binprm *bprm)
 		memset(&itimer, 0, sizeof itimer);
 		for (i = 0; i < 3; i++)
 			do_setitimer(i, &itimer, NULL);
-		flush_signals(current);
 		spin_lock_irq(&current->sighand->siglock);
-		flush_signal_handlers(current, 1);
-		sigemptyset(&current->blocked);
-		recalc_sigpending();
+		if (!(current->signal->flags & SIGNAL_GROUP_EXIT)) {
+			__flush_signals(current);
+			flush_signal_handlers(current, 1);
+			sigemptyset(&current->blocked);
+		}
 		spin_unlock_irq(&current->sighand->siglock);
 	}
 
 	/* Wake up the parent if it is waiting so that it can recheck
 	 * wait permission to the new task SID. */
-	read_lock_irq(&tasklist_lock);
-	psig = current->parent->sighand;
-	spin_lock_irqsave(&psig->siglock, flags);
-	wake_up_interruptible(&current->parent->signal->wait_chldexit);
-	spin_unlock_irqrestore(&psig->siglock, flags);
-	read_unlock_irq(&tasklist_lock);
+	read_lock(&tasklist_lock);
+	wake_up_interruptible(&current->real_parent->signal->wait_chldexit);
+	read_unlock(&tasklist_lock);
 }
 
 /* superblock security operations */
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index 5c3434f7626..ca835795a8b 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -8,14 +8,13 @@
 #ifndef _SELINUX_SECURITY_H_
 #define _SELINUX_SECURITY_H_
 
+#include <linux/magic.h>
 #include "flask.h"
 
 #define SECSID_NULL			0x00000000 /* unspecified SID */
 #define SECSID_WILD			0xffffffff /* wildcard SID */
 #define SECCLASS_NULL			0x0000 /* no class */
 
-#define SELINUX_MAGIC 0xf97cff8c
-
 /* Identify specific policy version changes */
 #define POLICYDB_VERSION_BASE		15
 #define POLICYDB_VERSION_BOOL		16
@@ -91,9 +90,11 @@ struct av_decision {
 	u32 auditallow;
 	u32 auditdeny;
 	u32 seqno;
+	u32 flags;
 };
 
-int security_permissive_sid(u32 sid);
+/* definitions of av_decision.flags */
+#define AVD_FLAGS_PERMISSIVE	0x0001
 
 int security_compute_av(u32 ssid, u32 tsid,
 	u16 tclass, u32 requested,
diff --git a/security/selinux/nlmsgtab.c b/security/selinux/nlmsgtab.c
index c6875fd3b9d..dd7cc6de77f 100644
--- a/security/selinux/nlmsgtab.c
+++ b/security/selinux/nlmsgtab.c
@@ -112,6 +112,8 @@ static struct nlmsg_perm nlmsg_audit_perms[] =
 	{ AUDIT_DEL_RULE,	NETLINK_AUDIT_SOCKET__NLMSG_WRITE    },
 	{ AUDIT_USER,		NETLINK_AUDIT_SOCKET__NLMSG_RELAY    },
 	{ AUDIT_SIGNAL_INFO,	NETLINK_AUDIT_SOCKET__NLMSG_READ     },
+	{ AUDIT_TRIM,		NETLINK_AUDIT_SOCKET__NLMSG_WRITE    },
+	{ AUDIT_MAKE_EQUIV,	NETLINK_AUDIT_SOCKET__NLMSG_WRITE    },
 	{ AUDIT_TTY_GET,	NETLINK_AUDIT_SOCKET__NLMSG_READ     },
 	{ AUDIT_TTY_SET,	NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT	},
 };
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 2d5136ec3d5..b4fc506e7a8 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -527,10 +527,10 @@ static ssize_t sel_write_access(struct file *file, char *buf, size_t size)
 		goto out2;
 
 	length = scnprintf(buf, SIMPLE_TRANSACTION_LIMIT,
-			  "%x %x %x %x %u",
+			  "%x %x %x %x %u %x",
 			  avd.allowed, 0xffffffff,
 			  avd.auditallow, avd.auditdeny,
-			  avd.seqno);
+			  avd.seqno, avd.flags);
 out2:
 	kfree(tcon);
 out:
@@ -803,10 +803,6 @@ static ssize_t sel_read_bool(struct file *filep, char __user *buf,
 		goto out;
 	}
 
-	if (count > PAGE_SIZE) {
-		ret = -EINVAL;
-		goto out;
-	}
 	page = (char *)get_zeroed_page(GFP_KERNEL);
 	if (!page) {
 		ret = -ENOMEM;
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index deeec6c013a..500e6f78e11 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -410,6 +410,7 @@ static int context_struct_compute_av(struct context *scontext,
 	avd->auditallow = 0;
 	avd->auditdeny = 0xffffffff;
 	avd->seqno = latest_granting;
+	avd->flags = 0;
 
 	/*
 	 * Check for all the invalid cases.
@@ -528,31 +529,6 @@ inval_class:
 	return 0;
 }
 
-/*
- * Given a sid find if the type has the permissive flag set
- */
-int security_permissive_sid(u32 sid)
-{
-	struct context *context;
-	u32 type;
-	int rc;
-
-	read_lock(&policy_rwlock);
-
-	context = sidtab_search(&sidtab, sid);
-	BUG_ON(!context);
-
-	type = context->type;
-	/*
-	 * we are intentionally using type here, not type-1, the 0th bit may
-	 * someday indicate that we are globally setting permissive in policy.
-	 */
-	rc = ebitmap_get_bit(&policydb.permissive_map, type);
-
-	read_unlock(&policy_rwlock);
-	return rc;
-}
-
 static int security_validtrans_handle_fail(struct context *ocontext,
 					   struct context *ncontext,
 					   struct context *tcontext,
@@ -767,6 +743,10 @@ int security_compute_av(u32 ssid,
 
 	rc = context_struct_compute_av(scontext, tcontext, tclass,
 				       requested, avd);
+
+	/* permissive domain? */
+	if (ebitmap_get_bit(&policydb.permissive_map, scontext->type))
+	    avd->flags |= AVD_FLAGS_PERMISSIVE;
 out:
 	read_unlock(&policy_rwlock);
 	return rc;
diff --git a/security/smack/smack.h b/security/smack/smack.h
index 42ef313f985..243bec175be 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -20,6 +20,7 @@
 #include <net/netlabel.h>
 #include <linux/list.h>
 #include <linux/rculist.h>
+#include <linux/lsm_audit.h>
 
 /*
  * Why 23? CIPSO is constrained to 30, so a 32 byte buffer is
@@ -179,6 +180,20 @@ struct smack_known {
 #define MAY_NOT		0
 
 /*
+ * Number of access types used by Smack (rwxa)
+ */
+#define SMK_NUM_ACCESS_TYPE 4
+
+/*
+ * Smack audit data; is empty if CONFIG_AUDIT not set
+ * to save some stack
+ */
+struct smk_audit_info {
+#ifdef CONFIG_AUDIT
+	struct common_audit_data a;
+#endif
+};
+/*
  * These functions are in smack_lsm.c
  */
 struct inode_smack *new_inode_smack(char *);
@@ -186,8 +201,8 @@ struct inode_smack *new_inode_smack(char *);
 /*
  * These functions are in smack_access.c
  */
-int smk_access(char *, char *, int);
-int smk_curacc(char *, u32);
+int smk_access(char *, char *, int, struct smk_audit_info *);
+int smk_curacc(char *, u32, struct smk_audit_info *);
 int smack_to_cipso(const char *, struct smack_cipso *);
 void smack_from_cipso(u32, char *, char *);
 char *smack_from_secid(const u32);
@@ -237,4 +252,93 @@ static inline char *smk_of_inode(const struct inode *isp)
 	return sip->smk_inode;
 }
 
+/*
+ * logging functions
+ */
+#define SMACK_AUDIT_DENIED 0x1
+#define SMACK_AUDIT_ACCEPT 0x2
+extern int log_policy;
+
+void smack_log(char *subject_label, char *object_label,
+		int request,
+		int result, struct smk_audit_info *auditdata);
+
+#ifdef CONFIG_AUDIT
+
+/*
+ * some inline functions to set up audit data
+ * they do nothing if CONFIG_AUDIT is not set
+ *
+ */
+static inline void smk_ad_init(struct smk_audit_info *a, const char *func,
+			       char type)
+{
+	memset(a, 0, sizeof(*a));
+	a->a.type = type;
+	a->a.function = func;
+}
+
+static inline void smk_ad_setfield_u_tsk(struct smk_audit_info *a,
+					 struct task_struct *t)
+{
+	a->a.u.tsk = t;
+}
+static inline void smk_ad_setfield_u_fs_path_dentry(struct smk_audit_info *a,
+						    struct dentry *d)
+{
+	a->a.u.fs.path.dentry = d;
+}
+static inline void smk_ad_setfield_u_fs_path_mnt(struct smk_audit_info *a,
+						 struct vfsmount *m)
+{
+	a->a.u.fs.path.mnt = m;
+}
+static inline void smk_ad_setfield_u_fs_inode(struct smk_audit_info *a,
+					      struct inode *i)
+{
+	a->a.u.fs.inode = i;
+}
+static inline void smk_ad_setfield_u_fs_path(struct smk_audit_info *a,
+					     struct path p)
+{
+	a->a.u.fs.path = p;
+}
+static inline void smk_ad_setfield_u_net_sk(struct smk_audit_info *a,
+					    struct sock *sk)
+{
+	a->a.u.net.sk = sk;
+}
+
+#else /* no AUDIT */
+
+static inline void smk_ad_init(struct smk_audit_info *a, const char *func,
+			       char type)
+{
+}
+static inline void smk_ad_setfield_u_tsk(struct smk_audit_info *a,
+					 struct task_struct *t)
+{
+}
+static inline void smk_ad_setfield_u_fs_path_dentry(struct smk_audit_info *a,
+						    struct dentry *d)
+{
+}
+static inline void smk_ad_setfield_u_fs_path_mnt(struct smk_audit_info *a,
+						 struct vfsmount *m)
+{
+}
+static inline void smk_ad_setfield_u_fs_inode(struct smk_audit_info *a,
+					      struct inode *i)
+{
+}
+static inline void smk_ad_setfield_u_fs_path(struct smk_audit_info *a,
+					     struct path p)
+{
+}
+static inline void smk_ad_setfield_u_net_sk(struct smk_audit_info *a,
+					    struct sock *sk)
+{
+}
+#endif
+
 #endif  /* _SECURITY_SMACK_H */
diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c
index ac0a2707f6d..513dc1aa16d 100644
--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -59,11 +59,18 @@ LIST_HEAD(smack_known_list);
  */
 static u32 smack_next_secid = 10;
 
+/*
+ * what events do we log
+ * can be overwritten at run-time by /smack/logging
+ */
+int log_policy = SMACK_AUDIT_DENIED;
+
 /**
  * smk_access - determine if a subject has a specific access to an object
  * @subject_label: a pointer to the subject's Smack label
  * @object_label: a pointer to the object's Smack label
  * @request: the access requested, in "MAY" format
+ * @a : a pointer to the audit data
  *
  * This function looks up the subject/object pair in the
  * access rule list and returns 0 if the access is permitted,
@@ -78,10 +85,12 @@ static u32 smack_next_secid = 10;
  * will be on the list, so checking the pointers may be a worthwhile
  * optimization.
  */
-int smk_access(char *subject_label, char *object_label, int request)
+int smk_access(char *subject_label, char *object_label, int request,
+	       struct smk_audit_info *a)
 {
 	u32 may = MAY_NOT;
 	struct smack_rule *srp;
+	int rc = 0;
 
 	/*
 	 * Hardcoded comparisons.
@@ -89,8 +98,10 @@ int smk_access(char *subject_label, char *object_label, int request)
 	 * A star subject can't access any object.
 	 */
 	if (subject_label == smack_known_star.smk_known ||
-	    strcmp(subject_label, smack_known_star.smk_known) == 0)
-		return -EACCES;
+	    strcmp(subject_label, smack_known_star.smk_known) == 0) {
+		rc = -EACCES;
+		goto out_audit;
+	}
 	/*
 	 * An internet object can be accessed by any subject.
 	 * Tasks cannot be assigned the internet label.
@@ -100,20 +111,20 @@ int smk_access(char *subject_label, char *object_label, int request)
 	    subject_label == smack_known_web.smk_known ||
 	    strcmp(object_label, smack_known_web.smk_known) == 0 ||
 	    strcmp(subject_label, smack_known_web.smk_known) == 0)
-		return 0;
+		goto out_audit;
 	/*
 	 * A star object can be accessed by any subject.
 	 */
 	if (object_label == smack_known_star.smk_known ||
 	    strcmp(object_label, smack_known_star.smk_known) == 0)
-		return 0;
+		goto out_audit;
 	/*
 	 * An object can be accessed in any way by a subject
 	 * with the same label.
 	 */
 	if (subject_label == object_label ||
 	    strcmp(subject_label, object_label) == 0)
-		return 0;
+		goto out_audit;
 	/*
 	 * A hat subject can read any object.
 	 * A floor object can be read by any subject.
@@ -121,10 +132,10 @@ int smk_access(char *subject_label, char *object_label, int request)
 	if ((request & MAY_ANYREAD) == request) {
 		if (object_label == smack_known_floor.smk_known ||
 		    strcmp(object_label, smack_known_floor.smk_known) == 0)
-			return 0;
+			goto out_audit;
 		if (subject_label == smack_known_hat.smk_known ||
 		    strcmp(subject_label, smack_known_hat.smk_known) == 0)
-			return 0;
+			goto out_audit;
 	}
 	/*
 	 * Beyond here an explicit relationship is required.
@@ -148,28 +159,36 @@ int smk_access(char *subject_label, char *object_label, int request)
 	 * This is a bit map operation.
 	 */
 	if ((request & may) == request)
-		return 0;
-
-	return -EACCES;
+		goto out_audit;
+
+	rc = -EACCES;
+out_audit:
+#ifdef CONFIG_AUDIT
+	if (a)
+		smack_log(subject_label, object_label, request, rc, a);
+#endif
+	return rc;
 }
 
 /**
  * smk_curacc - determine if current has a specific access to an object
  * @obj_label: a pointer to the object's Smack label
  * @mode: the access requested, in "MAY" format
+ * @a : common audit data
  *
  * This function checks the current subject label/object label pair
  * in the access rule list and returns 0 if the access is permitted,
  * non zero otherwise. It allows that current may have the capability
  * to override the rules.
  */
-int smk_curacc(char *obj_label, u32 mode)
+int smk_curacc(char *obj_label, u32 mode, struct smk_audit_info *a)
 {
 	int rc;
+	char *sp = current_security();
 
-	rc = smk_access(current_security(), obj_label, mode);
+	rc = smk_access(sp, obj_label, mode, NULL);
 	if (rc == 0)
-		return 0;
+		goto out_audit;
 
 	/*
 	 * Return if a specific label has been designated as the
@@ -177,14 +196,105 @@ int smk_curacc(char *obj_label, u32 mode)
 	 * have that label.
 	 */
 	if (smack_onlycap != NULL && smack_onlycap != current->cred->security)
-		return rc;
+		goto out_audit;
 
 	if (capable(CAP_MAC_OVERRIDE))
 		return 0;
 
+out_audit:
+#ifdef CONFIG_AUDIT
+	if (a)
+		smack_log(sp, obj_label, mode, rc, a);
+#endif
 	return rc;
 }
 
+#ifdef CONFIG_AUDIT
+/**
+ * smack_str_from_perm : helper to transalate an int to a
+ * readable string
+ * @string : the string to fill
+ * @access : the int
+ *
+ */
+static inline void smack_str_from_perm(char *string, int access)
+{
+	int i = 0;
+	if (access & MAY_READ)
+		string[i++] = 'r';
+	if (access & MAY_WRITE)
+		string[i++] = 'w';
+	if (access & MAY_EXEC)
+		string[i++] = 'x';
+	if (access & MAY_APPEND)
+		string[i++] = 'a';
+	string[i] = '\0';
+}
+/**
+ * smack_log_callback - SMACK specific information
+ * will be called by generic audit code
+ * @ab : the audit_buffer
+ * @a  : audit_data
+ *
+ */
+static void smack_log_callback(struct audit_buffer *ab, void *a)
+{
+	struct common_audit_data *ad = a;
+	struct smack_audit_data *sad = &ad->lsm_priv.smack_audit_data;
+	audit_log_format(ab, "lsm=SMACK fn=%s action=%s", ad->function,
+			 sad->result ? "denied" : "granted");
+	audit_log_format(ab, " subject=");
+	audit_log_untrustedstring(ab, sad->subject);
+	audit_log_format(ab, " object=");
+	audit_log_untrustedstring(ab, sad->object);
+	audit_log_format(ab, " requested=%s", sad->request);
+}
+
+/**
+ *  smack_log - Audit the granting or denial of permissions.
+ *  @subject_label : smack label of the requester
+ *  @object_label  : smack label of the object being accessed
+ *  @request: requested permissions
+ *  @result: result from smk_access
+ *  @a:  auxiliary audit data
+ *
+ * Audit the granting or denial of permissions in accordance
+ * with the policy.
+ */
+void smack_log(char *subject_label, char *object_label, int request,
+	       int result, struct smk_audit_info *ad)
+{
+	char request_buffer[SMK_NUM_ACCESS_TYPE + 1];
+	struct smack_audit_data *sad;
+	struct common_audit_data *a = &ad->a;
+
+	/* check if we have to log the current event */
+	if (result != 0 && (log_policy & SMACK_AUDIT_DENIED) == 0)
+		return;
+	if (result == 0 && (log_policy & SMACK_AUDIT_ACCEPT) == 0)
+		return;
+
+	if (a->function == NULL)
+		a->function = "unknown";
+
+	/* end preparing the audit data */
+	sad = &a->lsm_priv.smack_audit_data;
+	smack_str_from_perm(request_buffer, request);
+	sad->subject = subject_label;
+	sad->object  = object_label;
+	sad->request = request_buffer;
+	sad->result  = result;
+	a->lsm_pre_audit = smack_log_callback;
+
+	common_lsm_audit(a);
+}
+#else /* #ifdef CONFIG_AUDIT */
+void smack_log(char *subject_label, char *object_label, int request,
+               int result, struct smk_audit_info *ad)
+{
+}
+#endif
+
 static DEFINE_MUTEX(smack_known_lock);
 
 /**
@@ -209,7 +319,8 @@ struct smack_known *smk_import_entry(const char *string, int len)
 		if (found)
 			smack[i] = '\0';
 		else if (i >= len || string[i] > '~' || string[i] <= ' ' ||
-			 string[i] == '/') {
+			 string[i] == '/' || string[i] == '"' ||
+			 string[i] == '\\' || string[i] == '\'') {
 			smack[i] = '\0';
 			found = 1;
 		} else
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 98b3195347a..0023182078c 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -30,7 +30,6 @@
 #include <net/netlabel.h>
 #include <net/cipso_ipv4.h>
 #include <linux/audit.h>
-
 #include "smack.h"
 
 #define task_security(task)	(task_cred_xxx((task), security))
@@ -103,14 +102,24 @@ struct inode_smack *new_inode_smack(char *smack)
 static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
 {
 	int rc;
+	struct smk_audit_info ad;
+	char *sp, *tsp;
 
 	rc = cap_ptrace_may_access(ctp, mode);
 	if (rc != 0)
 		return rc;
 
-	rc = smk_access(current_security(), task_security(ctp), MAY_READWRITE);
+	sp = current_security();
+	tsp = task_security(ctp);
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_tsk(&ad, ctp);
+
+	/* we won't log here, because rc can be overriden */
+	rc = smk_access(sp, tsp, MAY_READWRITE, NULL);
 	if (rc != 0 && capable(CAP_MAC_OVERRIDE))
-		return 0;
+		rc = 0;
+
+	smack_log(sp, tsp, MAY_READWRITE, rc, &ad);
 	return rc;
 }
 
@@ -125,14 +134,24 @@ static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
 static int smack_ptrace_traceme(struct task_struct *ptp)
 {
 	int rc;
+	struct smk_audit_info ad;
+	char *sp, *tsp;
 
 	rc = cap_ptrace_traceme(ptp);
 	if (rc != 0)
 		return rc;
 
-	rc = smk_access(task_security(ptp), current_security(), MAY_READWRITE);
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_tsk(&ad, ptp);
+
+	sp = current_security();
+	tsp = task_security(ptp);
+	/* we won't log here, because rc can be overriden */
+	rc = smk_access(tsp, sp, MAY_READWRITE, NULL);
 	if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE))
-		return 0;
+		rc = 0;
+
+	smack_log(tsp, sp, MAY_READWRITE, rc, &ad);
 	return rc;
 }
 
@@ -327,8 +346,14 @@ static int smack_sb_kern_mount(struct super_block *sb, int flags, void *data)
 static int smack_sb_statfs(struct dentry *dentry)
 {
 	struct superblock_smack *sbp = dentry->d_sb->s_security;
+	int rc;
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
 
-	return smk_curacc(sbp->smk_floor, MAY_READ);
+	rc = smk_curacc(sbp->smk_floor, MAY_READ, &ad);
+	return rc;
 }
 
 /**
@@ -346,8 +371,12 @@ static int smack_sb_mount(char *dev_name, struct path *path,
 			  char *type, unsigned long flags, void *data)
 {
 	struct superblock_smack *sbp = path->mnt->mnt_sb->s_security;
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path(&ad, *path);
 
-	return smk_curacc(sbp->smk_floor, MAY_WRITE);
+	return smk_curacc(sbp->smk_floor, MAY_WRITE, &ad);
 }
 
 /**
@@ -361,10 +390,14 @@ static int smack_sb_mount(char *dev_name, struct path *path,
 static int smack_sb_umount(struct vfsmount *mnt, int flags)
 {
 	struct superblock_smack *sbp;
+	struct smk_audit_info ad;
 
-	sbp = mnt->mnt_sb->s_security;
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, mnt->mnt_mountpoint);
+	smk_ad_setfield_u_fs_path_mnt(&ad, mnt);
 
-	return smk_curacc(sbp->smk_floor, MAY_WRITE);
+	sbp = mnt->mnt_sb->s_security;
+	return smk_curacc(sbp->smk_floor, MAY_WRITE, &ad);
 }
 
 /*
@@ -441,15 +474,20 @@ static int smack_inode_init_security(struct inode *inode, struct inode *dir,
 static int smack_inode_link(struct dentry *old_dentry, struct inode *dir,
 			    struct dentry *new_dentry)
 {
-	int rc;
 	char *isp;
+	struct smk_audit_info ad;
+	int rc;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, old_dentry);
 
 	isp = smk_of_inode(old_dentry->d_inode);
-	rc = smk_curacc(isp, MAY_WRITE);
+	rc = smk_curacc(isp, MAY_WRITE, &ad);
 
 	if (rc == 0 && new_dentry->d_inode != NULL) {
 		isp = smk_of_inode(new_dentry->d_inode);
-		rc = smk_curacc(isp, MAY_WRITE);
+		smk_ad_setfield_u_fs_path_dentry(&ad, new_dentry);
+		rc = smk_curacc(isp, MAY_WRITE, &ad);
 	}
 
 	return rc;
@@ -466,18 +504,24 @@ static int smack_inode_link(struct dentry *old_dentry, struct inode *dir,
 static int smack_inode_unlink(struct inode *dir, struct dentry *dentry)
 {
 	struct inode *ip = dentry->d_inode;
+	struct smk_audit_info ad;
 	int rc;
 
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
+
 	/*
 	 * You need write access to the thing you're unlinking
 	 */
-	rc = smk_curacc(smk_of_inode(ip), MAY_WRITE);
-	if (rc == 0)
+	rc = smk_curacc(smk_of_inode(ip), MAY_WRITE, &ad);
+	if (rc == 0) {
 		/*
 		 * You also need write access to the containing directory
 		 */
-		rc = smk_curacc(smk_of_inode(dir), MAY_WRITE);
-
+		smk_ad_setfield_u_fs_path_dentry(&ad, NULL);
+		smk_ad_setfield_u_fs_inode(&ad, dir);
+		rc = smk_curacc(smk_of_inode(dir), MAY_WRITE, &ad);
+	}
 	return rc;
 }
 
@@ -491,17 +535,24 @@ static int smack_inode_unlink(struct inode *dir, struct dentry *dentry)
  */
 static int smack_inode_rmdir(struct inode *dir, struct dentry *dentry)
 {
+	struct smk_audit_info ad;
 	int rc;
 
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
+
 	/*
 	 * You need write access to the thing you're removing
 	 */
-	rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE);
-	if (rc == 0)
+	rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad);
+	if (rc == 0) {
 		/*
 		 * You also need write access to the containing directory
 		 */
-		rc = smk_curacc(smk_of_inode(dir), MAY_WRITE);
+		smk_ad_setfield_u_fs_path_dentry(&ad, NULL);
+		smk_ad_setfield_u_fs_inode(&ad, dir);
+		rc = smk_curacc(smk_of_inode(dir), MAY_WRITE, &ad);
+	}
 
 	return rc;
 }
@@ -525,15 +576,19 @@ static int smack_inode_rename(struct inode *old_inode,
 {
 	int rc;
 	char *isp;
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, old_dentry);
 
 	isp = smk_of_inode(old_dentry->d_inode);
-	rc = smk_curacc(isp, MAY_READWRITE);
+	rc = smk_curacc(isp, MAY_READWRITE, &ad);
 
 	if (rc == 0 && new_dentry->d_inode != NULL) {
 		isp = smk_of_inode(new_dentry->d_inode);
-		rc = smk_curacc(isp, MAY_READWRITE);
+		smk_ad_setfield_u_fs_path_dentry(&ad, new_dentry);
+		rc = smk_curacc(isp, MAY_READWRITE, &ad);
 	}
-
 	return rc;
 }
 
@@ -548,13 +603,15 @@ static int smack_inode_rename(struct inode *old_inode,
  */
 static int smack_inode_permission(struct inode *inode, int mask)
 {
+	struct smk_audit_info ad;
 	/*
 	 * No permission to check. Existence test. Yup, it's there.
 	 */
 	if (mask == 0)
 		return 0;
-
-	return smk_curacc(smk_of_inode(inode), mask);
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_inode(&ad, inode);
+	return smk_curacc(smk_of_inode(inode), mask, &ad);
 }
 
 /**
@@ -566,13 +623,16 @@ static int smack_inode_permission(struct inode *inode, int mask)
  */
 static int smack_inode_setattr(struct dentry *dentry, struct iattr *iattr)
 {
+	struct smk_audit_info ad;
 	/*
 	 * Need to allow for clearing the setuid bit.
 	 */
 	if (iattr->ia_valid & ATTR_FORCE)
 		return 0;
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
 
-	return smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE);
+	return smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad);
 }
 
 /**
@@ -584,7 +644,12 @@ static int smack_inode_setattr(struct dentry *dentry, struct iattr *iattr)
  */
 static int smack_inode_getattr(struct vfsmount *mnt, struct dentry *dentry)
 {
-	return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ);
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
+	smk_ad_setfield_u_fs_path_mnt(&ad, mnt);
+	return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ, &ad);
 }
 
 /**
@@ -602,6 +667,7 @@ static int smack_inode_getattr(struct vfsmount *mnt, struct dentry *dentry)
 static int smack_inode_setxattr(struct dentry *dentry, const char *name,
 				const void *value, size_t size, int flags)
 {
+	struct smk_audit_info ad;
 	int rc = 0;
 
 	if (strcmp(name, XATTR_NAME_SMACK) == 0 ||
@@ -619,8 +685,11 @@ static int smack_inode_setxattr(struct dentry *dentry, const char *name,
 	} else
 		rc = cap_inode_setxattr(dentry, name, value, size, flags);
 
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
+
 	if (rc == 0)
-		rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE);
+		rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad);
 
 	return rc;
 }
@@ -672,7 +741,12 @@ static void smack_inode_post_setxattr(struct dentry *dentry, const char *name,
  */
 static int smack_inode_getxattr(struct dentry *dentry, const char *name)
 {
-	return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ);
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
+
+	return smk_curacc(smk_of_inode(dentry->d_inode), MAY_READ, &ad);
 }
 
 /*
@@ -686,6 +760,7 @@ static int smack_inode_getxattr(struct dentry *dentry, const char *name)
  */
 static int smack_inode_removexattr(struct dentry *dentry, const char *name)
 {
+	struct smk_audit_info ad;
 	int rc = 0;
 
 	if (strcmp(name, XATTR_NAME_SMACK) == 0 ||
@@ -696,8 +771,10 @@ static int smack_inode_removexattr(struct dentry *dentry, const char *name)
 	} else
 		rc = cap_inode_removexattr(dentry, name);
 
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
 	if (rc == 0)
-		rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE);
+		rc = smk_curacc(smk_of_inode(dentry->d_inode), MAY_WRITE, &ad);
 
 	return rc;
 }
@@ -856,12 +933,16 @@ static int smack_file_ioctl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
 {
 	int rc = 0;
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path(&ad, file->f_path);
 
 	if (_IOC_DIR(cmd) & _IOC_WRITE)
-		rc = smk_curacc(file->f_security, MAY_WRITE);
+		rc = smk_curacc(file->f_security, MAY_WRITE, &ad);
 
 	if (rc == 0 && (_IOC_DIR(cmd) & _IOC_READ))
-		rc = smk_curacc(file->f_security, MAY_READ);
+		rc = smk_curacc(file->f_security, MAY_READ, &ad);
 
 	return rc;
 }
@@ -875,7 +956,11 @@ static int smack_file_ioctl(struct file *file, unsigned int cmd,
  */
 static int smack_file_lock(struct file *file, unsigned int cmd)
 {
-	return smk_curacc(file->f_security, MAY_WRITE);
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path_dentry(&ad, file->f_path.dentry);
+	return smk_curacc(file->f_security, MAY_WRITE, &ad);
 }
 
 /**
@@ -889,8 +974,12 @@ static int smack_file_lock(struct file *file, unsigned int cmd)
 static int smack_file_fcntl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
 {
+	struct smk_audit_info ad;
 	int rc;
 
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
+	smk_ad_setfield_u_fs_path(&ad, file->f_path);
+
 	switch (cmd) {
 	case F_DUPFD:
 	case F_GETFD:
@@ -898,7 +987,7 @@ static int smack_file_fcntl(struct file *file, unsigned int cmd,
 	case F_GETLK:
 	case F_GETOWN:
 	case F_GETSIG:
-		rc = smk_curacc(file->f_security, MAY_READ);
+		rc = smk_curacc(file->f_security, MAY_READ, &ad);
 		break;
 	case F_SETFD:
 	case F_SETFL:
@@ -906,10 +995,10 @@ static int smack_file_fcntl(struct file *file, unsigned int cmd,
 	case F_SETLKW:
 	case F_SETOWN:
 	case F_SETSIG:
-		rc = smk_curacc(file->f_security, MAY_WRITE);
+		rc = smk_curacc(file->f_security, MAY_WRITE, &ad);
 		break;
 	default:
-		rc = smk_curacc(file->f_security, MAY_READWRITE);
+		rc = smk_curacc(file->f_security, MAY_READWRITE, &ad);
 	}
 
 	return rc;
@@ -944,14 +1033,21 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
 {
 	struct file *file;
 	int rc;
+	char *tsp = tsk->cred->security;
+	struct smk_audit_info ad;
 
 	/*
 	 * struct fown_struct is never outside the context of a struct file
 	 */
 	file = container_of(fown, struct file, f_owner);
-	rc = smk_access(file->f_security, tsk->cred->security, MAY_WRITE);
+	/* we don't log here as rc can be overriden */
+	rc = smk_access(file->f_security, tsp, MAY_WRITE, NULL);
 	if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
-		return 0;
+		rc = 0;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_tsk(&ad, tsk);
+	smack_log(file->f_security, tsp, MAY_WRITE, rc, &ad);
 	return rc;
 }
 
@@ -964,7 +1060,10 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
 static int smack_file_receive(struct file *file)
 {
 	int may = 0;
+	struct smk_audit_info ad;
 
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_fs_path(&ad, file->f_path);
 	/*
 	 * This code relies on bitmasks.
 	 */
@@ -973,7 +1072,7 @@ static int smack_file_receive(struct file *file)
 	if (file->f_mode & FMODE_WRITE)
 		may |= MAY_WRITE;
 
-	return smk_curacc(file->f_security, may);
+	return smk_curacc(file->f_security, may, &ad);
 }
 
 /*
@@ -1053,6 +1152,22 @@ static int smack_kernel_create_files_as(struct cred *new,
 }
 
 /**
+ * smk_curacc_on_task - helper to log task related access
+ * @p: the task object
+ * @access : the access requested
+ *
+ * Return 0 if access is permitted
+ */
+static int smk_curacc_on_task(struct task_struct *p, int access)
+{
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_tsk(&ad, p);
+	return smk_curacc(task_security(p), access, &ad);
+}
+
+/**
  * smack_task_setpgid - Smack check on setting pgid
  * @p: the task object
  * @pgid: unused
@@ -1061,7 +1176,7 @@ static int smack_kernel_create_files_as(struct cred *new,
  */
 static int smack_task_setpgid(struct task_struct *p, pid_t pgid)
 {
-	return smk_curacc(task_security(p), MAY_WRITE);
+	return smk_curacc_on_task(p, MAY_WRITE);
 }
 
 /**
@@ -1072,7 +1187,7 @@ static int smack_task_setpgid(struct task_struct *p, pid_t pgid)
  */
 static int smack_task_getpgid(struct task_struct *p)
 {
-	return smk_curacc(task_security(p), MAY_READ);
+	return smk_curacc_on_task(p, MAY_READ);
 }
 
 /**
@@ -1083,7 +1198,7 @@ static int smack_task_getpgid(struct task_struct *p)
  */
 static int smack_task_getsid(struct task_struct *p)
 {
-	return smk_curacc(task_security(p), MAY_READ);
+	return smk_curacc_on_task(p, MAY_READ);
 }
 
 /**
@@ -1111,7 +1226,7 @@ static int smack_task_setnice(struct task_struct *p, int nice)
 
 	rc = cap_task_setnice(p, nice);
 	if (rc == 0)
-		rc = smk_curacc(task_security(p), MAY_WRITE);
+		rc = smk_curacc_on_task(p, MAY_WRITE);
 	return rc;
 }
 
@@ -1128,7 +1243,7 @@ static int smack_task_setioprio(struct task_struct *p, int ioprio)
 
 	rc = cap_task_setioprio(p, ioprio);
 	if (rc == 0)
-		rc = smk_curacc(task_security(p), MAY_WRITE);
+		rc = smk_curacc_on_task(p, MAY_WRITE);
 	return rc;
 }
 
@@ -1140,7 +1255,7 @@ static int smack_task_setioprio(struct task_struct *p, int ioprio)
  */
 static int smack_task_getioprio(struct task_struct *p)
 {
-	return smk_curacc(task_security(p), MAY_READ);
+	return smk_curacc_on_task(p, MAY_READ);
 }
 
 /**
@@ -1158,7 +1273,7 @@ static int smack_task_setscheduler(struct task_struct *p, int policy,
 
 	rc = cap_task_setscheduler(p, policy, lp);
 	if (rc == 0)
-		rc = smk_curacc(task_security(p), MAY_WRITE);
+		rc = smk_curacc_on_task(p, MAY_WRITE);
 	return rc;
 }
 
@@ -1170,7 +1285,7 @@ static int smack_task_setscheduler(struct task_struct *p, int policy,
  */
 static int smack_task_getscheduler(struct task_struct *p)
 {
-	return smk_curacc(task_security(p), MAY_READ);
+	return smk_curacc_on_task(p, MAY_READ);
 }
 
 /**
@@ -1181,7 +1296,7 @@ static int smack_task_getscheduler(struct task_struct *p)
  */
 static int smack_task_movememory(struct task_struct *p)
 {
-	return smk_curacc(task_security(p), MAY_WRITE);
+	return smk_curacc_on_task(p, MAY_WRITE);
 }
 
 /**
@@ -1199,18 +1314,23 @@ static int smack_task_movememory(struct task_struct *p)
 static int smack_task_kill(struct task_struct *p, struct siginfo *info,
 			   int sig, u32 secid)
 {
+	struct smk_audit_info ad;
+
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_tsk(&ad, p);
 	/*
 	 * Sending a signal requires that the sender
 	 * can write the receiver.
 	 */
 	if (secid == 0)
-		return smk_curacc(task_security(p), MAY_WRITE);
+		return smk_curacc(task_security(p), MAY_WRITE, &ad);
 	/*
 	 * If the secid isn't 0 we're dealing with some USB IO
 	 * specific behavior. This is not clean. For one thing
 	 * we can't take privilege into account.
 	 */
-	return smk_access(smack_from_secid(secid), task_security(p), MAY_WRITE);
+	return smk_access(smack_from_secid(secid), task_security(p),
+			  MAY_WRITE, &ad);
 }
 
 /**
@@ -1221,11 +1341,15 @@ static int smack_task_kill(struct task_struct *p, struct siginfo *info,
  */
 static int smack_task_wait(struct task_struct *p)
 {
+	struct smk_audit_info ad;
+	char *sp = current_security();
+	char *tsp = task_security(p);
 	int rc;
 
-	rc = smk_access(current_security(), task_security(p), MAY_WRITE);
+	/* we don't log here, we can be overriden */
+	rc = smk_access(sp, tsp, MAY_WRITE, NULL);
 	if (rc == 0)
-		return 0;
+		goto out_log;
 
 	/*
 	 * Allow the operation to succeed if either task
@@ -1239,8 +1363,12 @@ static int smack_task_wait(struct task_struct *p)
 	 * the smack value.
 	 */
 	if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
-		return 0;
-
+		rc = 0;
+	/* we log only if we didn't get overriden */
+ out_log:
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
+	smk_ad_setfield_u_tsk(&ad, p);
+	smack_log(sp, tsp, MAY_WRITE, rc, &ad);
 	return rc;
 }
 
@@ -1456,12 +1584,19 @@ static int smack_netlabel_send(struct sock *sk, struct sockaddr_in *sap)
 	int sk_lbl;
 	char *hostsp;
 	struct socket_smack *ssp = sk->sk_security;
+	struct smk_audit_info ad;
 
 	rcu_read_lock();
 	hostsp = smack_host_label(sap);
 	if (hostsp != NULL) {
 		sk_lbl = SMACK_UNLABELED_SOCKET;
-		rc = smk_access(ssp->smk_out, hostsp, MAY_WRITE);
+#ifdef CONFIG_AUDIT
+		smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
+		ad.a.u.net.family = sap->sin_family;
+		ad.a.u.net.dport = sap->sin_port;
+		ad.a.u.net.v4info.daddr = sap->sin_addr.s_addr;
+#endif
+		rc = smk_access(ssp->smk_out, hostsp, MAY_WRITE, &ad);
 	} else {
 		sk_lbl = SMACK_CIPSO_SOCKET;
 		rc = 0;
@@ -1657,6 +1792,25 @@ static void smack_shm_free_security(struct shmid_kernel *shp)
 }
 
 /**
+ * smk_curacc_shm : check if current has access on shm
+ * @shp : the object
+ * @access : access requested
+ *
+ * Returns 0 if current has the requested access, error code otherwise
+ */
+static int smk_curacc_shm(struct shmid_kernel *shp, int access)
+{
+	char *ssp = smack_of_shm(shp);
+	struct smk_audit_info ad;
+
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC);
+	ad.a.u.ipc_id = shp->shm_perm.id;
+#endif
+	return smk_curacc(ssp, access, &ad);
+}
+
+/**
  * smack_shm_associate - Smack access check for shm
  * @shp: the object
  * @shmflg: access requested
@@ -1665,11 +1819,10 @@ static void smack_shm_free_security(struct shmid_kernel *shp)
  */
 static int smack_shm_associate(struct shmid_kernel *shp, int shmflg)
 {
-	char *ssp = smack_of_shm(shp);
 	int may;
 
 	may = smack_flags_to_may(shmflg);
-	return smk_curacc(ssp, may);
+	return smk_curacc_shm(shp, may);
 }
 
 /**
@@ -1681,7 +1834,6 @@ static int smack_shm_associate(struct shmid_kernel *shp, int shmflg)
  */
 static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd)
 {
-	char *ssp;
 	int may;
 
 	switch (cmd) {
@@ -1704,9 +1856,7 @@ static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd)
 	default:
 		return -EINVAL;
 	}
-
-	ssp = smack_of_shm(shp);
-	return smk_curacc(ssp, may);
+	return smk_curacc_shm(shp, may);
 }
 
 /**
@@ -1720,11 +1870,10 @@ static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd)
 static int smack_shm_shmat(struct shmid_kernel *shp, char __user *shmaddr,
 			   int shmflg)
 {
-	char *ssp = smack_of_shm(shp);
 	int may;
 
 	may = smack_flags_to_may(shmflg);
-	return smk_curacc(ssp, may);
+	return smk_curacc_shm(shp, may);
 }
 
 /**
@@ -1766,6 +1915,25 @@ static void smack_sem_free_security(struct sem_array *sma)
 }
 
 /**
+ * smk_curacc_sem : check if current has access on sem
+ * @sma : the object
+ * @access : access requested
+ *
+ * Returns 0 if current has the requested access, error code otherwise
+ */
+static int smk_curacc_sem(struct sem_array *sma, int access)
+{
+	char *ssp = smack_of_sem(sma);
+	struct smk_audit_info ad;
+
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC);
+	ad.a.u.ipc_id = sma->sem_perm.id;
+#endif
+	return smk_curacc(ssp, access, &ad);
+}
+
+/**
  * smack_sem_associate - Smack access check for sem
  * @sma: the object
  * @semflg: access requested
@@ -1774,11 +1942,10 @@ static void smack_sem_free_security(struct sem_array *sma)
  */
 static int smack_sem_associate(struct sem_array *sma, int semflg)
 {
-	char *ssp = smack_of_sem(sma);
 	int may;
 
 	may = smack_flags_to_may(semflg);
-	return smk_curacc(ssp, may);
+	return smk_curacc_sem(sma, may);
 }
 
 /**
@@ -1790,7 +1957,6 @@ static int smack_sem_associate(struct sem_array *sma, int semflg)
  */
 static int smack_sem_semctl(struct sem_array *sma, int cmd)
 {
-	char *ssp;
 	int may;
 
 	switch (cmd) {
@@ -1819,8 +1985,7 @@ static int smack_sem_semctl(struct sem_array *sma, int cmd)
 		return -EINVAL;
 	}
 
-	ssp = smack_of_sem(sma);
-	return smk_curacc(ssp, may);
+	return smk_curacc_sem(sma, may);
 }
 
 /**
@@ -1837,9 +2002,7 @@ static int smack_sem_semctl(struct sem_array *sma, int cmd)
 static int smack_sem_semop(struct sem_array *sma, struct sembuf *sops,
 			   unsigned nsops, int alter)
 {
-	char *ssp = smack_of_sem(sma);
-
-	return smk_curacc(ssp, MAY_READWRITE);
+	return smk_curacc_sem(sma, MAY_READWRITE);
 }
 
 /**
@@ -1881,6 +2044,25 @@ static char *smack_of_msq(struct msg_queue *msq)
 }
 
 /**
+ * smk_curacc_msq : helper to check if current has access on msq
+ * @msq : the msq
+ * @access : access requested
+ *
+ * return 0 if current has access, error otherwise
+ */
+static int smk_curacc_msq(struct msg_queue *msq, int access)
+{
+	char *msp = smack_of_msq(msq);
+	struct smk_audit_info ad;
+
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC);
+	ad.a.u.ipc_id = msq->q_perm.id;
+#endif
+	return smk_curacc(msp, access, &ad);
+}
+
+/**
  * smack_msg_queue_associate - Smack access check for msg_queue
  * @msq: the object
  * @msqflg: access requested
@@ -1889,11 +2071,10 @@ static char *smack_of_msq(struct msg_queue *msq)
  */
 static int smack_msg_queue_associate(struct msg_queue *msq, int msqflg)
 {
-	char *msp = smack_of_msq(msq);
 	int may;
 
 	may = smack_flags_to_may(msqflg);
-	return smk_curacc(msp, may);
+	return smk_curacc_msq(msq, may);
 }
 
 /**
@@ -1905,7 +2086,6 @@ static int smack_msg_queue_associate(struct msg_queue *msq, int msqflg)
  */
 static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd)
 {
-	char *msp;
 	int may;
 
 	switch (cmd) {
@@ -1927,8 +2107,7 @@ static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd)
 		return -EINVAL;
 	}
 
-	msp = smack_of_msq(msq);
-	return smk_curacc(msp, may);
+	return smk_curacc_msq(msq, may);
 }
 
 /**
@@ -1942,11 +2121,10 @@ static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd)
 static int smack_msg_queue_msgsnd(struct msg_queue *msq, struct msg_msg *msg,
 				  int msqflg)
 {
-	char *msp = smack_of_msq(msq);
-	int rc;
+	int may;
 
-	rc = smack_flags_to_may(msqflg);
-	return smk_curacc(msp, rc);
+	may = smack_flags_to_may(msqflg);
+	return smk_curacc_msq(msq, may);
 }
 
 /**
@@ -1962,9 +2140,7 @@ static int smack_msg_queue_msgsnd(struct msg_queue *msq, struct msg_msg *msg,
 static int smack_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg,
 			struct task_struct *target, long type, int mode)
 {
-	char *msp = smack_of_msq(msq);
-
-	return smk_curacc(msp, MAY_READWRITE);
+	return smk_curacc_msq(msq, MAY_READWRITE);
 }
 
 /**
@@ -1977,10 +2153,14 @@ static int smack_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg,
 static int smack_ipc_permission(struct kern_ipc_perm *ipp, short flag)
 {
 	char *isp = ipp->security;
-	int may;
+	int may = smack_flags_to_may(flag);
+	struct smk_audit_info ad;
 
-	may = smack_flags_to_may(flag);
-	return smk_curacc(isp, may);
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_IPC);
+	ad.a.u.ipc_id = ipp->id;
+#endif
+	return smk_curacc(isp, may, &ad);
 }
 
 /**
@@ -2239,8 +2419,12 @@ static int smack_unix_stream_connect(struct socket *sock,
 {
 	struct inode *sp = SOCK_INODE(sock);
 	struct inode *op = SOCK_INODE(other);
+	struct smk_audit_info ad;
 
-	return smk_access(smk_of_inode(sp), smk_of_inode(op), MAY_READWRITE);
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
+	smk_ad_setfield_u_net_sk(&ad, other->sk);
+	return smk_access(smk_of_inode(sp), smk_of_inode(op),
+				 MAY_READWRITE, &ad);
 }
 
 /**
@@ -2255,8 +2439,11 @@ static int smack_unix_may_send(struct socket *sock, struct socket *other)
 {
 	struct inode *sp = SOCK_INODE(sock);
 	struct inode *op = SOCK_INODE(other);
+	struct smk_audit_info ad;
 
-	return smk_access(smk_of_inode(sp), smk_of_inode(op), MAY_WRITE);
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
+	smk_ad_setfield_u_net_sk(&ad, other->sk);
+	return smk_access(smk_of_inode(sp), smk_of_inode(op), MAY_WRITE, &ad);
 }
 
 /**
@@ -2371,7 +2558,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 	char smack[SMK_LABELLEN];
 	char *csp;
 	int rc;
-
+	struct smk_audit_info ad;
 	if (sk->sk_family != PF_INET && sk->sk_family != PF_INET6)
 		return 0;
 
@@ -2389,13 +2576,19 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 
 	netlbl_secattr_destroy(&secattr);
 
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
+	ad.a.u.net.family = sk->sk_family;
+	ad.a.u.net.netif = skb->iif;
+	ipv4_skb_to_auditdata(skb, &ad.a, NULL);
+#endif
 	/*
 	 * Receiving a packet requires that the other end
 	 * be able to write here. Read access is not required.
 	 * This is the simplist possible security model
 	 * for networking.
 	 */
-	rc = smk_access(csp, ssp->smk_in, MAY_WRITE);
+	rc = smk_access(csp, ssp->smk_in, MAY_WRITE, &ad);
 	if (rc != 0)
 		netlbl_skbuff_err(skb, rc, 0);
 	return rc;
@@ -2524,6 +2717,7 @@ static int smack_inet_conn_request(struct sock *sk, struct sk_buff *skb,
 	struct iphdr *hdr;
 	char smack[SMK_LABELLEN];
 	int rc;
+	struct smk_audit_info ad;
 
 	/* handle mapped IPv4 packets arriving via IPv6 sockets */
 	if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
@@ -2537,11 +2731,17 @@ static int smack_inet_conn_request(struct sock *sk, struct sk_buff *skb,
 		strncpy(smack, smack_known_huh.smk_known, SMK_MAXLEN);
 	netlbl_secattr_destroy(&secattr);
 
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
+	ad.a.u.net.family = family;
+	ad.a.u.net.netif = skb->iif;
+	ipv4_skb_to_auditdata(skb, &ad.a, NULL);
+#endif
 	/*
 	 * Receiving a packet requires that the other end be able to write
 	 * here. Read access is not required.
 	 */
-	rc = smk_access(smack, ssp->smk_in, MAY_WRITE);
+	rc = smk_access(smack, ssp->smk_in, MAY_WRITE, &ad);
 	if (rc != 0)
 		return rc;
 
@@ -2643,6 +2843,7 @@ static int smack_key_permission(key_ref_t key_ref,
 				const struct cred *cred, key_perm_t perm)
 {
 	struct key *keyp;
+	struct smk_audit_info ad;
 
 	keyp = key_ref_to_ptr(key_ref);
 	if (keyp == NULL)
@@ -2658,8 +2859,13 @@ static int smack_key_permission(key_ref_t key_ref,
 	 */
 	if (cred->security == NULL)
 		return -EACCES;
-
-	return smk_access(cred->security, keyp->security, MAY_READWRITE);
+#ifdef CONFIG_AUDIT
+	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_KEY);
+	ad.a.u.key_struct.key = keyp->serial;
+	ad.a.u.key_struct.key_desc = keyp->description;
+#endif
+	return smk_access(cred->security, keyp->security,
+				 MAY_READWRITE, &ad);
 }
 #endif /* CONFIG_KEYS */
 
@@ -2828,15 +3034,7 @@ struct security_operations smack_ops = {
 
 	.ptrace_may_access =		smack_ptrace_may_access,
 	.ptrace_traceme =		smack_ptrace_traceme,
-	.capget = 			cap_capget,
-	.capset = 			cap_capset,
-	.capable = 			cap_capable,
 	.syslog = 			smack_syslog,
-	.settime = 			cap_settime,
-	.vm_enough_memory = 		cap_vm_enough_memory,
-
-	.bprm_set_creds = 		cap_bprm_set_creds,
-	.bprm_secureexec = 		cap_bprm_secureexec,
 
 	.sb_alloc_security = 		smack_sb_alloc_security,
 	.sb_free_security = 		smack_sb_free_security,
@@ -2860,8 +3058,6 @@ struct security_operations smack_ops = {
 	.inode_post_setxattr = 		smack_inode_post_setxattr,
 	.inode_getxattr = 		smack_inode_getxattr,
 	.inode_removexattr = 		smack_inode_removexattr,
-	.inode_need_killpriv =		cap_inode_need_killpriv,
-	.inode_killpriv =		cap_inode_killpriv,
 	.inode_getsecurity = 		smack_inode_getsecurity,
 	.inode_setsecurity = 		smack_inode_setsecurity,
 	.inode_listsecurity = 		smack_inode_listsecurity,
@@ -2882,7 +3078,6 @@ struct security_operations smack_ops = {
 	.cred_commit =			smack_cred_commit,
 	.kernel_act_as =		smack_kernel_act_as,
 	.kernel_create_files_as =	smack_kernel_create_files_as,
-	.task_fix_setuid =		cap_task_fix_setuid,
 	.task_setpgid = 		smack_task_setpgid,
 	.task_getpgid = 		smack_task_getpgid,
 	.task_getsid = 			smack_task_getsid,
@@ -2896,7 +3091,6 @@ struct security_operations smack_ops = {
 	.task_kill = 			smack_task_kill,
 	.task_wait = 			smack_task_wait,
 	.task_to_inode = 		smack_task_to_inode,
-	.task_prctl =			cap_task_prctl,
 
 	.ipc_permission = 		smack_ipc_permission,
 	.ipc_getsecid =			smack_ipc_getsecid,
@@ -2923,9 +3117,6 @@ struct security_operations smack_ops = {
 	.sem_semctl = 			smack_sem_semctl,
 	.sem_semop = 			smack_sem_semop,
 
-	.netlink_send =			cap_netlink_send,
-	.netlink_recv = 		cap_netlink_recv,
-
 	.d_instantiate = 		smack_d_instantiate,
 
 	.getprocattr = 			smack_getprocattr,
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index e03a7e19c73..f83a8098072 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -41,6 +41,7 @@ enum smk_inos {
 	SMK_AMBIENT	= 7,	/* internet ambient label */
 	SMK_NETLBLADDR	= 8,	/* single label hosts */
 	SMK_ONLYCAP	= 9,	/* the only "capable" label */
+	SMK_LOGGING	= 10,	/* logging */
 };
 
 /*
@@ -734,8 +735,8 @@ static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
 		return;
 	}
 
-	m = list_entry(rcu_dereference(smk_netlbladdr_list.next),
-			 struct smk_netlbladdr, list);
+	m = list_entry_rcu(smk_netlbladdr_list.next,
+			   struct smk_netlbladdr, list);
 
 	/* the comparison '>' is a bit hacky, but works */
 	if (new->smk_mask.s_addr > m->smk_mask.s_addr) {
@@ -748,8 +749,8 @@ static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
 			list_add_rcu(&new->list, &m->list);
 			return;
 		}
-		m_next = list_entry(rcu_dereference(m->list.next),
-				 struct smk_netlbladdr, list);
+		m_next = list_entry_rcu(m->list.next,
+					struct smk_netlbladdr, list);
 		if (new->smk_mask.s_addr > m_next->smk_mask.s_addr) {
 			list_add_rcu(&new->list, &m->list);
 			return;
@@ -775,7 +776,7 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf,
 	struct sockaddr_in newname;
 	char smack[SMK_LABELLEN];
 	char *sp;
-	char data[SMK_NETLBLADDRMAX];
+	char data[SMK_NETLBLADDRMAX + 1];
 	char *host = (char *)&newname.sin_addr.s_addr;
 	int rc;
 	struct netlbl_audit audit_info;
@@ -1192,6 +1193,69 @@ static const struct file_operations smk_onlycap_ops = {
 };
 
 /**
+ * smk_read_logging - read() for /smack/logging
+ * @filp: file pointer, not actually used
+ * @buf: where to put the result
+ * @cn: maximum to send along
+ * @ppos: where to start
+ *
+ * Returns number of bytes read or error code, as appropriate
+ */
+static ssize_t smk_read_logging(struct file *filp, char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	char temp[32];
+	ssize_t rc;
+
+	if (*ppos != 0)
+		return 0;
+
+	sprintf(temp, "%d\n", log_policy);
+	rc = simple_read_from_buffer(buf, count, ppos, temp, strlen(temp));
+	return rc;
+}
+
+/**
+ * smk_write_logging - write() for /smack/logging
+ * @file: file pointer, not actually used
+ * @buf: where to get the data from
+ * @count: bytes sent
+ * @ppos: where to start
+ *
+ * Returns number of bytes written or error code, as appropriate
+ */
+static ssize_t smk_write_logging(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	char temp[32];
+	int i;
+
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (count >= sizeof(temp) || count == 0)
+		return -EINVAL;
+
+	if (copy_from_user(temp, buf, count) != 0)
+		return -EFAULT;
+
+	temp[count] = '\0';
+
+	if (sscanf(temp, "%d", &i) != 1)
+		return -EINVAL;
+	if (i < 0 || i > 3)
+		return -EINVAL;
+	log_policy = i;
+	return count;
+}
+
+
+
+static const struct file_operations smk_logging_ops = {
+	.read		= smk_read_logging,
+	.write		= smk_write_logging,
+};
+/**
  * smk_fill_super - fill the /smackfs superblock
  * @sb: the empty superblock
  * @data: unused
@@ -1221,6 +1285,8 @@ static int smk_fill_super(struct super_block *sb, void *data, int silent)
 			{"netlabel", &smk_netlbladdr_ops, S_IRUGO|S_IWUSR},
 		[SMK_ONLYCAP]	=
 			{"onlycap", &smk_onlycap_ops, S_IRUGO|S_IWUSR},
+		[SMK_LOGGING]	=
+			{"logging", &smk_logging_ops, S_IRUGO|S_IWUSR},
 		/* last one */ {""}
 	};
 
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index ddfb9cccf46..fdd1f4b8c44 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -28,7 +28,13 @@ static const char *tomoyo_mode_2[4] = {
 	"disabled", "enabled", "enabled", "enabled"
 };
 
-/* Table for profile. */
+/*
+ * tomoyo_control_array is a static data which contains
+ *
+ *  (1) functionality name used by /sys/kernel/security/tomoyo/profile .
+ *  (2) initial values for "struct tomoyo_profile".
+ *  (3) max values for "struct tomoyo_profile".
+ */
 static struct {
 	const char *keyword;
 	unsigned int current_value;
@@ -39,7 +45,13 @@ static struct {
 	[TOMOYO_VERBOSE]          = { "TOMOYO_VERBOSE",      1,       1 },
 };
 
-/* Profile table. Memory is allocated as needed. */
+/*
+ * tomoyo_profile is a structure which is used for holding the mode of access
+ * controls. TOMOYO has 4 modes: disabled, learning, permissive, enforcing.
+ * An administrator can define up to 256 profiles.
+ * The ->profile of "struct tomoyo_domain_info" is used for remembering
+ * the profile's number (0 - 255) assigned to that domain.
+ */
 static struct tomoyo_profile {
 	unsigned int value[TOMOYO_MAX_CONTROL_INDEX];
 	const struct tomoyo_path_info *comment;
@@ -428,7 +440,6 @@ void tomoyo_fill_path_info(struct tomoyo_path_info *ptr)
 	const char *name = ptr->name;
 	const int len = strlen(name);
 
-	ptr->total_len = len;
 	ptr->const_len = tomoyo_const_part_length(name);
 	ptr->is_dir = len && (name[len - 1] == '/');
 	ptr->is_patterned = (ptr->const_len < len);
@@ -866,7 +877,6 @@ static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned
 
 	if (profile >= TOMOYO_MAX_PROFILES)
 		return NULL;
-	/***** EXCLUSIVE SECTION START *****/
 	mutex_lock(&lock);
 	ptr = tomoyo_profile_ptr[profile];
 	if (ptr)
@@ -880,7 +890,6 @@ static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned
 	tomoyo_profile_ptr[profile] = ptr;
  ok:
 	mutex_unlock(&lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return ptr;
 }
 
@@ -1009,7 +1018,19 @@ static int tomoyo_read_profile(struct tomoyo_io_buffer *head)
 	return 0;
 }
 
-/* Structure for policy manager. */
+/*
+ * tomoyo_policy_manager_entry is a structure which is used for holding list of
+ * domainnames or programs which are permitted to modify configuration via
+ * /sys/kernel/security/tomoyo/ interface.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_policy_manager_list .
+ *  (2) "manager" is a domainname or a program's pathname.
+ *  (3) "is_domain" is a bool which is true if "manager" is a domainname, false
+ *      otherwise.
+ *  (4) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ */
 struct tomoyo_policy_manager_entry {
 	struct list_head list;
 	/* A path to program or a domainname. */
@@ -1018,7 +1039,36 @@ struct tomoyo_policy_manager_entry {
 	bool is_deleted; /* True if this entry is deleted. */
 };
 
-/* The list for "struct tomoyo_policy_manager_entry". */
+/*
+ * tomoyo_policy_manager_list is used for holding list of domainnames or
+ * programs which are permitted to modify configuration via
+ * /sys/kernel/security/tomoyo/ interface.
+ *
+ * An entry is added by
+ *
+ * # echo '<kernel> /sbin/mingetty /bin/login /bin/bash' > \
+ *                                        /sys/kernel/security/tomoyo/manager
+ *  (if you want to specify by a domainname)
+ *
+ *  or
+ *
+ * # echo '/usr/lib/ccs/editpolicy' > /sys/kernel/security/tomoyo/manager
+ *  (if you want to specify by a program's location)
+ *
+ * and is deleted by
+ *
+ * # echo 'delete <kernel> /sbin/mingetty /bin/login /bin/bash' > \
+ *                                        /sys/kernel/security/tomoyo/manager
+ *
+ *  or
+ *
+ * # echo 'delete /usr/lib/ccs/editpolicy' > \
+ *                                        /sys/kernel/security/tomoyo/manager
+ *
+ * and all entries are retrieved by
+ *
+ * # cat /sys/kernel/security/tomoyo/manager
+ */
 static LIST_HEAD(tomoyo_policy_manager_list);
 static DECLARE_RWSEM(tomoyo_policy_manager_list_lock);
 
@@ -1050,7 +1100,6 @@ static int tomoyo_update_manager_entry(const char *manager,
 	saved_manager = tomoyo_save_name(manager);
 	if (!saved_manager)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_policy_manager_list_lock);
 	list_for_each_entry(ptr, &tomoyo_policy_manager_list, list) {
 		if (ptr->manager != saved_manager)
@@ -1072,7 +1121,6 @@ static int tomoyo_update_manager_entry(const char *manager,
 	error = 0;
  out:
 	up_write(&tomoyo_policy_manager_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -1117,10 +1165,9 @@ static int tomoyo_read_manager_policy(struct tomoyo_io_buffer *head)
 				 list);
 		if (ptr->is_deleted)
 			continue;
-		if (!tomoyo_io_printf(head, "%s\n", ptr->manager->name)) {
-			done = false;
+		done = tomoyo_io_printf(head, "%s\n", ptr->manager->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_policy_manager_list_lock);
 	head->read_eof = done;
@@ -1197,13 +1244,11 @@ static bool tomoyo_is_select_one(struct tomoyo_io_buffer *head,
 
 	if (sscanf(data, "pid=%u", &pid) == 1) {
 		struct task_struct *p;
-		/***** CRITICAL SECTION START *****/
 		read_lock(&tasklist_lock);
 		p = find_task_by_vpid(pid);
 		if (p)
 			domain = tomoyo_real_domain(p);
 		read_unlock(&tasklist_lock);
-		/***** CRITICAL SECTION END *****/
 	} else if (!strncmp(data, "domain=", 7)) {
 		if (tomoyo_is_domain_def(data + 7)) {
 			down_read(&tomoyo_domain_list_lock);
@@ -1447,15 +1492,14 @@ static int tomoyo_read_domain_policy(struct tomoyo_io_buffer *head)
 		    TOMOYO_DOMAIN_FLAGS_IGNORE_GLOBAL_ALLOW_READ)
 			ignore_global_allow_read
 				= TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ "\n";
-		if (!tomoyo_io_printf(head,
-				      "%s\n" TOMOYO_KEYWORD_USE_PROFILE "%u\n"
-				      "%s%s%s\n", domain->domainname->name,
-				      domain->profile, quota_exceeded,
-				      transition_failed,
-				      ignore_global_allow_read)) {
-			done = false;
+		done = tomoyo_io_printf(head, "%s\n" TOMOYO_KEYWORD_USE_PROFILE
+					"%u\n%s%s%s\n",
+					domain->domainname->name,
+					domain->profile, quota_exceeded,
+					transition_failed,
+					ignore_global_allow_read);
+		if (!done)
 			break;
-		}
 		head->read_step = 2;
 acl_loop:
 		if (head->read_step == 3)
@@ -1463,24 +1507,22 @@ acl_loop:
 		/* Print ACL entries in the domain. */
 		down_read(&tomoyo_domain_acl_info_list_lock);
 		list_for_each_cookie(apos, head->read_var2,
-				      &domain->acl_info_list) {
+				     &domain->acl_info_list) {
 			struct tomoyo_acl_info *ptr
 				= list_entry(apos, struct tomoyo_acl_info,
-					      list);
-			if (!tomoyo_print_entry(head, ptr)) {
-				done = false;
+					     list);
+			done = tomoyo_print_entry(head, ptr);
+			if (!done)
 				break;
-			}
 		}
 		up_read(&tomoyo_domain_acl_info_list_lock);
 		if (!done)
 			break;
 		head->read_step = 3;
 tail_mark:
-		if (!tomoyo_io_printf(head, "\n")) {
-			done = false;
+		done = tomoyo_io_printf(head, "\n");
+		if (!done)
 			break;
-		}
 		head->read_step = 1;
 		if (head->read_single_domain)
 			break;
@@ -1550,11 +1592,10 @@ static int tomoyo_read_domain_profile(struct tomoyo_io_buffer *head)
 		domain = list_entry(pos, struct tomoyo_domain_info, list);
 		if (domain->is_deleted)
 			continue;
-		if (!tomoyo_io_printf(head, "%u %s\n", domain->profile,
-				      domain->domainname->name)) {
-			done = false;
+		done = tomoyo_io_printf(head, "%u %s\n", domain->profile,
+					domain->domainname->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_domain_list_lock);
 	head->read_eof = done;
@@ -1594,13 +1635,11 @@ static int tomoyo_read_pid(struct tomoyo_io_buffer *head)
 		const int pid = head->read_step;
 		struct task_struct *p;
 		struct tomoyo_domain_info *domain = NULL;
-		/***** CRITICAL SECTION START *****/
 		read_lock(&tasklist_lock);
 		p = find_task_by_vpid(pid);
 		if (p)
 			domain = tomoyo_real_domain(p);
 		read_unlock(&tasklist_lock);
-		/***** CRITICAL SECTION END *****/
 		if (domain)
 			tomoyo_io_printf(head, "%d %u %s", pid, domain->profile,
 					 domain->domainname->name);
@@ -2138,7 +2177,13 @@ static ssize_t tomoyo_write(struct file *file, const char __user *buf,
 	return tomoyo_write_control(file, buf, count);
 }
 
-/* Operations for /sys/kernel/security/tomoyo/ interface. */
+/*
+ * tomoyo_operations is a "struct file_operations" which is used for handling
+ * /sys/kernel/security/tomoyo/ interface.
+ *
+ * Some files under /sys/kernel/security/tomoyo/ directory accept open(O_RDWR).
+ * See tomoyo_io_buffer for internals.
+ */
 static const struct file_operations tomoyo_operations = {
 	.open    = tomoyo_open,
 	.release = tomoyo_release,
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index 678f4ff16aa..6d6ba09af45 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -26,16 +26,43 @@
 struct dentry;
 struct vfsmount;
 
-/* Temporary buffer for holding pathnames. */
+/*
+ * tomoyo_page_buffer is a structure which is used for holding a pathname
+ * obtained from "struct dentry" and "struct vfsmount" pair.
+ * As of now, it is 4096 bytes. If users complain that 4096 bytes is too small
+ * (because TOMOYO escapes non ASCII printable characters using \ooo format),
+ * we will make the buffer larger.
+ */
 struct tomoyo_page_buffer {
 	char buffer[4096];
 };
 
-/* Structure for holding a token. */
+/*
+ * tomoyo_path_info is a structure which is used for holding a string data
+ * used by TOMOYO.
+ * This structure has several fields for supporting pattern matching.
+ *
+ * (1) "name" is the '\0' terminated string data.
+ * (2) "hash" is full_name_hash(name, strlen(name)).
+ *     This allows tomoyo_pathcmp() to compare by hash before actually compare
+ *     using strcmp().
+ * (3) "const_len" is the length of the initial segment of "name" which
+ *     consists entirely of non wildcard characters. In other words, the length
+ *     which we can compare two strings using strncmp().
+ * (4) "is_dir" is a bool which is true if "name" ends with "/",
+ *     false otherwise.
+ *     TOMOYO distinguishes directory and non-directory. A directory ends with
+ *     "/" and non-directory does not end with "/".
+ * (5) "is_patterned" is a bool which is true if "name" contains wildcard
+ *     characters, false otherwise. This allows TOMOYO to use "hash" and
+ *     strcmp() for string comparison if "is_patterned" is false.
+ * (6) "depth" is calculated using the number of "/" characters in "name".
+ *     This allows TOMOYO to avoid comparing two pathnames which never match
+ *     (e.g. whether "/var/www/html/index.html" matches "/tmp/sh-thd-\$").
+ */
 struct tomoyo_path_info {
 	const char *name;
 	u32 hash;          /* = full_name_hash(name, strlen(name)) */
-	u16 total_len;     /* = strlen(name)                       */
 	u16 const_len;     /* = tomoyo_const_part_length(name)     */
 	bool is_dir;       /* = tomoyo_strendswith(name, "/")      */
 	bool is_patterned; /* = tomoyo_path_contains_pattern(name) */
@@ -51,7 +78,20 @@ struct tomoyo_path_info {
  */
 #define TOMOYO_MAX_PATHNAME_LEN 4000
 
-/* Structure for holding requested pathname. */
+/*
+ * tomoyo_path_info_with_data is a structure which is used for holding a
+ * pathname obtained from "struct dentry" and "struct vfsmount" pair.
+ *
+ * "struct tomoyo_path_info_with_data" consists of "struct tomoyo_path_info"
+ * and buffer for the pathname, while "struct tomoyo_page_buffer" consists of
+ * buffer for the pathname only.
+ *
+ * "struct tomoyo_path_info_with_data" is intended to allow TOMOYO to release
+ * both "struct tomoyo_path_info" and buffer for the pathname by single kfree()
+ * so that we don't need to return two pointers to the caller. If the caller
+ * puts "struct tomoyo_path_info" on stack memory, we will be able to remove
+ * "struct tomoyo_path_info_with_data".
+ */
 struct tomoyo_path_info_with_data {
 	/* Keep "head" first, for this pointer is passed to tomoyo_free(). */
 	struct tomoyo_path_info head;
@@ -61,7 +101,15 @@ struct tomoyo_path_info_with_data {
 };
 
 /*
- * Common header for holding ACL entries.
+ * tomoyo_acl_info is a structure which is used for holding
+ *
+ *  (1) "list" which is linked to the ->acl_info_list of
+ *      "struct tomoyo_domain_info"
+ *  (2) "type" which tells
+ *      (a) type & 0x7F : type of the entry (either
+ *          "struct tomoyo_single_path_acl_record" or
+ *          "struct tomoyo_double_path_acl_record")
+ *      (b) type & 0x80 : whether the entry is marked as "deleted".
  *
  * Packing "struct tomoyo_acl_info" allows
  * "struct tomoyo_single_path_acl_record" to embed "u16" and
@@ -81,7 +129,28 @@ struct tomoyo_acl_info {
 /* This ACL entry is deleted.           */
 #define TOMOYO_ACL_DELETED        0x80
 
-/* Structure for domain information. */
+/*
+ * tomoyo_domain_info is a structure which is used for holding permissions
+ * (e.g. "allow_read /lib/libc-2.5.so") given to each domain.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_domain_list .
+ *  (2) "acl_info_list" which is linked to "struct tomoyo_acl_info".
+ *  (3) "domainname" which holds the name of the domain.
+ *  (4) "profile" which remembers profile number assigned to this domain.
+ *  (5) "is_deleted" is a bool which is true if this domain is marked as
+ *      "deleted", false otherwise.
+ *  (6) "quota_warned" is a bool which is used for suppressing warning message
+ *      when learning mode learned too much entries.
+ *  (7) "flags" which remembers this domain's attributes.
+ *
+ * A domain's lifecycle is an analogy of files on / directory.
+ * Multiple domains with the same domainname cannot be created (as with
+ * creating files with the same filename fails with -EEXIST).
+ * If a process reached a domain, that process can reside in that domain after
+ * that domain is marked as "deleted" (as with a process can access an already
+ * open()ed file after that file was unlink()ed).
+ */
 struct tomoyo_domain_info {
 	struct list_head list;
 	struct list_head acl_info_list;
@@ -108,10 +177,18 @@ struct tomoyo_domain_info {
 #define TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED        2
 
 /*
- * Structure for "allow_read/write", "allow_execute", "allow_read",
- * "allow_write", "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir",
- * "allow_mkfifo", "allow_mksock", "allow_mkblock", "allow_mkchar",
- * "allow_truncate", "allow_symlink" and "allow_rewrite" directive.
+ * tomoyo_single_path_acl_record is a structure which is used for holding an
+ * entry with one pathname operation (e.g. open(), mkdir()).
+ * It has following fields.
+ *
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "perm" which is a bitmask of permitted operations.
+ *  (3) "filename" is the pathname.
+ *
+ * Directives held by this structure are "allow_read/write", "allow_execute",
+ * "allow_read", "allow_write", "allow_create", "allow_unlink", "allow_mkdir",
+ * "allow_rmdir", "allow_mkfifo", "allow_mksock", "allow_mkblock",
+ * "allow_mkchar", "allow_truncate", "allow_symlink" and "allow_rewrite".
  */
 struct tomoyo_single_path_acl_record {
 	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_SINGLE_PATH_ACL */
@@ -120,7 +197,18 @@ struct tomoyo_single_path_acl_record {
 	const struct tomoyo_path_info *filename;
 };
 
-/* Structure for "allow_rename" and "allow_link" directive. */
+/*
+ * tomoyo_double_path_acl_record is a structure which is used for holding an
+ * entry with two pathnames operation (i.e. link() and rename()).
+ * It has following fields.
+ *
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "perm" which is a bitmask of permitted operations.
+ *  (3) "filename1" is the source/old pathname.
+ *  (4) "filename2" is the destination/new pathname.
+ *
+ * Directives held by this structure are "allow_rename" and "allow_link".
+ */
 struct tomoyo_double_path_acl_record {
 	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_DOUBLE_PATH_ACL */
 	u8 perm;
@@ -153,7 +241,29 @@ struct tomoyo_double_path_acl_record {
 #define TOMOYO_VERBOSE                       2
 #define TOMOYO_MAX_CONTROL_INDEX             3
 
-/* Structure for reading/writing policy via securityfs interfaces. */
+/*
+ * tomoyo_io_buffer is a structure which is used for reading and modifying
+ * configuration via /sys/kernel/security/tomoyo/ interface.
+ * It has many fields. ->read_var1 , ->read_var2 , ->write_var1 are used as
+ * cursors.
+ *
+ * Since the content of /sys/kernel/security/tomoyo/domain_policy is a list of
+ * "struct tomoyo_domain_info" entries and each "struct tomoyo_domain_info"
+ * entry has a list of "struct tomoyo_acl_info", we need two cursors when
+ * reading (one is for traversing tomoyo_domain_list and the other is for
+ * traversing "struct tomoyo_acl_info"->acl_info_list ).
+ *
+ * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
+ * "select ", TOMOYO seeks the cursor ->read_var1 and ->write_var1 to the
+ * domain with the domainname specified by the rest of that line (NULL is set
+ * if seek failed).
+ * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
+ * "delete ", TOMOYO deletes an entry or a domain specified by the rest of that
+ * line (->write_var1 is set to NULL if a domain was deleted).
+ * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
+ * neither "select " nor "delete ", an entry or a domain specified by that line
+ * is appended.
+ */
 struct tomoyo_io_buffer {
 	int (*read) (struct tomoyo_io_buffer *);
 	int (*write) (struct tomoyo_io_buffer *);
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index 2d6748741a2..1d8b1696057 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -19,11 +19,63 @@
 /* The initial domain. */
 struct tomoyo_domain_info tomoyo_kernel_domain;
 
-/* The list for "struct tomoyo_domain_info". */
+/*
+ * tomoyo_domain_list is used for holding list of domains.
+ * The ->acl_info_list of "struct tomoyo_domain_info" is used for holding
+ * permissions (e.g. "allow_read /lib/libc-2.5.so") given to each domain.
+ *
+ * An entry is added by
+ *
+ * # ( echo "<kernel>"; echo "allow_execute /sbin/init" ) > \
+ *                                  /sys/kernel/security/tomoyo/domain_policy
+ *
+ * and is deleted by
+ *
+ * # ( echo "<kernel>"; echo "delete allow_execute /sbin/init" ) > \
+ *                                  /sys/kernel/security/tomoyo/domain_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # cat /sys/kernel/security/tomoyo/domain_policy
+ *
+ * A domain is added by
+ *
+ * # echo "<kernel>" > /sys/kernel/security/tomoyo/domain_policy
+ *
+ * and is deleted by
+ *
+ * # echo "delete <kernel>" > /sys/kernel/security/tomoyo/domain_policy
+ *
+ * and all domains are retrieved by
+ *
+ * # grep '^<kernel>' /sys/kernel/security/tomoyo/domain_policy
+ *
+ * Normally, a domainname is monotonically getting longer because a domainname
+ * which the process will belong to if an execve() operation succeeds is
+ * defined as a concatenation of "current domainname" + "pathname passed to
+ * execve()".
+ * See tomoyo_domain_initializer_list and tomoyo_domain_keeper_list for
+ * exceptions.
+ */
 LIST_HEAD(tomoyo_domain_list);
 DECLARE_RWSEM(tomoyo_domain_list_lock);
 
-/* Structure for "initialize_domain" and "no_initialize_domain" keyword. */
+/*
+ * tomoyo_domain_initializer_entry is a structure which is used for holding
+ * "initialize_domain" and "no_initialize_domain" entries.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_domain_initializer_list .
+ *  (2) "domainname" which is "a domainname" or "the last component of a
+ *      domainname". This field is NULL if "from" clause is not specified.
+ *  (3) "program" which is a program's pathname.
+ *  (4) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ *  (5) "is_not" is a bool which is true if "no_initialize_domain", false
+ *      otherwise.
+ *  (6) "is_last_name" is a bool which is true if "domainname" is "the last
+ *      component of a domainname", false otherwise.
+ */
 struct tomoyo_domain_initializer_entry {
 	struct list_head list;
 	const struct tomoyo_path_info *domainname;    /* This may be NULL */
@@ -34,7 +86,23 @@ struct tomoyo_domain_initializer_entry {
 	bool is_last_name;
 };
 
-/* Structure for "keep_domain" and "no_keep_domain" keyword. */
+/*
+ * tomoyo_domain_keeper_entry is a structure which is used for holding
+ * "keep_domain" and "no_keep_domain" entries.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_domain_keeper_list .
+ *  (2) "domainname" which is "a domainname" or "the last component of a
+ *      domainname".
+ *  (3) "program" which is a program's pathname.
+ *      This field is NULL if "from" clause is not specified.
+ *  (4) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ *  (5) "is_not" is a bool which is true if "no_initialize_domain", false
+ *      otherwise.
+ *  (6) "is_last_name" is a bool which is true if "domainname" is "the last
+ *      component of a domainname", false otherwise.
+ */
 struct tomoyo_domain_keeper_entry {
 	struct list_head list;
 	const struct tomoyo_path_info *domainname;
@@ -45,7 +113,16 @@ struct tomoyo_domain_keeper_entry {
 	bool is_last_name;
 };
 
-/* Structure for "alias" keyword. */
+/*
+ * tomoyo_alias_entry is a structure which is used for holding "alias" entries.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_alias_list .
+ *  (2) "original_name" which is a dereferenced pathname.
+ *  (3) "aliased_name" which is a symlink's pathname.
+ *  (4) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ */
 struct tomoyo_alias_entry {
 	struct list_head list;
 	const struct tomoyo_path_info *original_name;
@@ -67,14 +144,12 @@ void tomoyo_set_domain_flag(struct tomoyo_domain_info *domain,
 {
 	/* We need to serialize because this is bitfield operation. */
 	static DEFINE_SPINLOCK(lock);
-	/***** CRITICAL SECTION START *****/
 	spin_lock(&lock);
 	if (!is_delete)
 		domain->flags |= flags;
 	else
 		domain->flags &= ~flags;
 	spin_unlock(&lock);
-	/***** CRITICAL SECTION END *****/
 }
 
 /**
@@ -94,7 +169,42 @@ const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain)
 	return cp0;
 }
 
-/* The list for "struct tomoyo_domain_initializer_entry". */
+/*
+ * tomoyo_domain_initializer_list is used for holding list of programs which
+ * triggers reinitialization of domainname. Normally, a domainname is
+ * monotonically getting longer. But sometimes, we restart daemon programs.
+ * It would be convenient for us that "a daemon started upon system boot" and
+ * "the daemon restarted from console" belong to the same domain. Thus, TOMOYO
+ * provides a way to shorten domainnames.
+ *
+ * An entry is added by
+ *
+ * # echo 'initialize_domain /usr/sbin/httpd' > \
+ *                               /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and is deleted by
+ *
+ * # echo 'delete initialize_domain /usr/sbin/httpd' > \
+ *                               /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # grep ^initialize_domain /sys/kernel/security/tomoyo/exception_policy
+ *
+ * In the example above, /usr/sbin/httpd will belong to
+ * "<kernel> /usr/sbin/httpd" domain.
+ *
+ * You may specify a domainname using "from" keyword.
+ * "initialize_domain /usr/sbin/httpd from <kernel> /etc/rc.d/init.d/httpd"
+ * will cause "/usr/sbin/httpd" executed from "<kernel> /etc/rc.d/init.d/httpd"
+ * domain to belong to "<kernel> /usr/sbin/httpd" domain.
+ *
+ * You may add "no_" prefix to "initialize_domain".
+ * "initialize_domain /usr/sbin/httpd" and
+ * "no_initialize_domain /usr/sbin/httpd from <kernel> /etc/rc.d/init.d/httpd"
+ * will cause "/usr/sbin/httpd" to belong to "<kernel> /usr/sbin/httpd" domain
+ * unless executed from "<kernel> /etc/rc.d/init.d/httpd" domain.
+ */
 static LIST_HEAD(tomoyo_domain_initializer_list);
 static DECLARE_RWSEM(tomoyo_domain_initializer_list_lock);
 
@@ -135,7 +245,6 @@ static int tomoyo_update_domain_initializer_entry(const char *domainname,
 	saved_program = tomoyo_save_name(program);
 	if (!saved_program)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_domain_initializer_list_lock);
 	list_for_each_entry(ptr, &tomoyo_domain_initializer_list, list) {
 		if (ptr->is_not != is_not ||
@@ -161,7 +270,6 @@ static int tomoyo_update_domain_initializer_entry(const char *domainname,
 	error = 0;
  out:
 	up_write(&tomoyo_domain_initializer_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -193,13 +301,12 @@ bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head)
 			from = " from ";
 			domain = ptr->domainname->name;
 		}
-		if (!tomoyo_io_printf(head,
-				      "%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN
-				      "%s%s%s\n", no, ptr->program->name, from,
-				      domain)) {
-			done = false;
+		done = tomoyo_io_printf(head,
+					"%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN
+					"%s%s%s\n", no, ptr->program->name,
+					from, domain);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_domain_initializer_list_lock);
 	return done;
@@ -273,7 +380,44 @@ static bool tomoyo_is_domain_initializer(const struct tomoyo_path_info *
 	return flag;
 }
 
-/* The list for "struct tomoyo_domain_keeper_entry". */
+/*
+ * tomoyo_domain_keeper_list is used for holding list of domainnames which
+ * suppresses domain transition. Normally, a domainname is monotonically
+ * getting longer. But sometimes, we want to suppress domain transition.
+ * It would be convenient for us that programs executed from a login session
+ * belong to the same domain. Thus, TOMOYO provides a way to suppress domain
+ * transition.
+ *
+ * An entry is added by
+ *
+ * # echo 'keep_domain <kernel> /usr/sbin/sshd /bin/bash' > \
+ *                              /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and is deleted by
+ *
+ * # echo 'delete keep_domain <kernel> /usr/sbin/sshd /bin/bash' > \
+ *                              /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # grep ^keep_domain /sys/kernel/security/tomoyo/exception_policy
+ *
+ * In the example above, any process which belongs to
+ * "<kernel> /usr/sbin/sshd /bin/bash" domain will remain in that domain,
+ * unless explicitly specified by "initialize_domain" or "no_keep_domain".
+ *
+ * You may specify a program using "from" keyword.
+ * "keep_domain /bin/pwd from <kernel> /usr/sbin/sshd /bin/bash"
+ * will cause "/bin/pwd" executed from "<kernel> /usr/sbin/sshd /bin/bash"
+ * domain to remain in "<kernel> /usr/sbin/sshd /bin/bash" domain.
+ *
+ * You may add "no_" prefix to "keep_domain".
+ * "keep_domain <kernel> /usr/sbin/sshd /bin/bash" and
+ * "no_keep_domain /usr/bin/passwd from <kernel> /usr/sbin/sshd /bin/bash" will
+ * cause "/usr/bin/passwd" to belong to
+ * "<kernel> /usr/sbin/sshd /bin/bash /usr/bin/passwd" domain, unless
+ * explicitly specified by "initialize_domain".
+ */
 static LIST_HEAD(tomoyo_domain_keeper_list);
 static DECLARE_RWSEM(tomoyo_domain_keeper_list_lock);
 
@@ -296,7 +440,6 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname,
 	struct tomoyo_domain_keeper_entry *ptr;
 	const struct tomoyo_path_info *saved_domainname;
 	const struct tomoyo_path_info *saved_program = NULL;
-	static DEFINE_MUTEX(lock);
 	int error = -ENOMEM;
 	bool is_last_name = false;
 
@@ -315,7 +458,6 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname,
 	saved_domainname = tomoyo_save_name(domainname);
 	if (!saved_domainname)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_domain_keeper_list_lock);
 	list_for_each_entry(ptr, &tomoyo_domain_keeper_list, list) {
 		if (ptr->is_not != is_not ||
@@ -341,7 +483,6 @@ static int tomoyo_update_domain_keeper_entry(const char *domainname,
 	error = 0;
  out:
 	up_write(&tomoyo_domain_keeper_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -394,13 +535,12 @@ bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head)
 			from = " from ";
 			program = ptr->program->name;
 		}
-		if (!tomoyo_io_printf(head,
-				      "%s" TOMOYO_KEYWORD_KEEP_DOMAIN
-				      "%s%s%s\n", no, program, from,
-				      ptr->domainname->name)) {
-			done = false;
+		done = tomoyo_io_printf(head,
+					"%s" TOMOYO_KEYWORD_KEEP_DOMAIN
+					"%s%s%s\n", no, program, from,
+					ptr->domainname->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_domain_keeper_list_lock);
 	return done;
@@ -446,7 +586,36 @@ static bool tomoyo_is_domain_keeper(const struct tomoyo_path_info *domainname,
 	return flag;
 }
 
-/* The list for "struct tomoyo_alias_entry". */
+/*
+ * tomoyo_alias_list is used for holding list of symlink's pathnames which are
+ * allowed to be passed to an execve() request. Normally, the domainname which
+ * the current process will belong to after execve() succeeds is calculated
+ * using dereferenced pathnames. But some programs behave differently depending
+ * on the name passed to argv[0]. For busybox, calculating domainname using
+ * dereferenced pathnames will cause all programs in the busybox to belong to
+ * the same domain. Thus, TOMOYO provides a way to allow use of symlink's
+ * pathname for checking execve()'s permission and calculating domainname which
+ * the current process will belong to after execve() succeeds.
+ *
+ * An entry is added by
+ *
+ * # echo 'alias /bin/busybox /bin/cat' > \
+ *                            /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and is deleted by
+ *
+ * # echo 'delete alias /bin/busybox /bin/cat' > \
+ *                            /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # grep ^alias /sys/kernel/security/tomoyo/exception_policy
+ *
+ * In the example above, if /bin/cat is a symlink to /bin/busybox and execution
+ * of /bin/cat is requested, permission is checked for /bin/cat rather than
+ * /bin/busybox and domainname which the current process will belong to after
+ * execve() succeeds is calculated using /bin/cat rather than /bin/busybox .
+ */
 static LIST_HEAD(tomoyo_alias_list);
 static DECLARE_RWSEM(tomoyo_alias_list_lock);
 
@@ -476,7 +645,6 @@ static int tomoyo_update_alias_entry(const char *original_name,
 	saved_aliased_name = tomoyo_save_name(aliased_name);
 	if (!saved_original_name || !saved_aliased_name)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_alias_list_lock);
 	list_for_each_entry(ptr, &tomoyo_alias_list, list) {
 		if (ptr->original_name != saved_original_name ||
@@ -499,7 +667,6 @@ static int tomoyo_update_alias_entry(const char *original_name,
 	error = 0;
  out:
 	up_write(&tomoyo_alias_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -522,12 +689,11 @@ bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head)
 		ptr = list_entry(pos, struct tomoyo_alias_entry, list);
 		if (ptr->is_deleted)
 			continue;
-		if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n",
-				      ptr->original_name->name,
-				      ptr->aliased_name->name)) {
-			done = false;
+		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n",
+					ptr->original_name->name,
+					ptr->aliased_name->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_alias_list_lock);
 	return done;
@@ -567,7 +733,6 @@ int tomoyo_delete_domain(char *domainname)
 
 	name.name = domainname;
 	tomoyo_fill_path_info(&name);
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_domain_list_lock);
 	/* Is there an active domain? */
 	list_for_each_entry(domain, &tomoyo_domain_list, list) {
@@ -581,7 +746,6 @@ int tomoyo_delete_domain(char *domainname)
 		break;
 	}
 	up_write(&tomoyo_domain_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return 0;
 }
 
@@ -600,7 +764,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
 	struct tomoyo_domain_info *domain = NULL;
 	const struct tomoyo_path_info *saved_domainname;
 
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_domain_list_lock);
 	domain = tomoyo_find_domain(domainname);
 	if (domain)
@@ -619,7 +782,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
 		    domain->domainname != saved_domainname)
 			continue;
 		flag = false;
-		/***** CRITICAL SECTION START *****/
 		read_lock(&tasklist_lock);
 		for_each_process(p) {
 			if (tomoyo_real_domain(p) != domain)
@@ -628,7 +790,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
 			break;
 		}
 		read_unlock(&tasklist_lock);
-		/***** CRITICAL SECTION END *****/
 		if (flag)
 			continue;
 		list_for_each_entry(ptr, &domain->acl_info_list, list) {
@@ -651,7 +812,6 @@ struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
 	}
  out:
 	up_write(&tomoyo_domain_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return domain;
 }
 
@@ -739,7 +899,7 @@ int tomoyo_find_next_domain(struct linux_binprm *bprm,
 	}
 
 	/* Check execute permission. */
-	retval = tomoyo_check_exec_perm(old_domain, &r, tmp);
+	retval = tomoyo_check_exec_perm(old_domain, &r);
 	if (retval < 0)
 		goto out;
 
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 2316da8ec5b..5ae3a571559 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -14,21 +14,50 @@
 #include "realpath.h"
 #define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
 
-/* Structure for "allow_read" keyword. */
+/*
+ * tomoyo_globally_readable_file_entry is a structure which is used for holding
+ * "allow_read" entries.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_globally_readable_list .
+ *  (2) "filename" is a pathname which is allowed to open(O_RDONLY).
+ *  (3) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ */
 struct tomoyo_globally_readable_file_entry {
 	struct list_head list;
 	const struct tomoyo_path_info *filename;
 	bool is_deleted;
 };
 
-/* Structure for "file_pattern" keyword. */
+/*
+ * tomoyo_pattern_entry is a structure which is used for holding
+ * "tomoyo_pattern_list" entries.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_pattern_list .
+ *  (2) "pattern" is a pathname pattern which is used for converting pathnames
+ *      to pathname patterns during learning mode.
+ *  (3) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ */
 struct tomoyo_pattern_entry {
 	struct list_head list;
 	const struct tomoyo_path_info *pattern;
 	bool is_deleted;
 };
 
-/* Structure for "deny_rewrite" keyword. */
+/*
+ * tomoyo_no_rewrite_entry is a structure which is used for holding
+ * "deny_rewrite" entries.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_no_rewrite_list .
+ *  (2) "pattern" is a pathname which is by default not permitted to modify
+ *      already existing content.
+ *  (3) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
+ */
 struct tomoyo_no_rewrite_entry {
 	struct list_head list;
 	const struct tomoyo_path_info *pattern;
@@ -141,7 +170,31 @@ static int tomoyo_update_single_path_acl(const u8 type, const char *filename,
 					 struct tomoyo_domain_info *
 					 const domain, const bool is_delete);
 
-/* The list for "struct tomoyo_globally_readable_file_entry". */
+/*
+ * tomoyo_globally_readable_list is used for holding list of pathnames which
+ * are by default allowed to be open()ed for reading by any process.
+ *
+ * An entry is added by
+ *
+ * # echo 'allow_read /lib/libc-2.5.so' > \
+ *                               /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and is deleted by
+ *
+ * # echo 'delete allow_read /lib/libc-2.5.so' > \
+ *                               /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # grep ^allow_read /sys/kernel/security/tomoyo/exception_policy
+ *
+ * In the example above, any process is allowed to
+ * open("/lib/libc-2.5.so", O_RDONLY).
+ * One exception is, if the domain which current process belongs to is marked
+ * as "ignore_global_allow_read", current process can't do so unless explicitly
+ * given "allow_read /lib/libc-2.5.so" to the domain which current process
+ * belongs to.
+ */
 static LIST_HEAD(tomoyo_globally_readable_list);
 static DECLARE_RWSEM(tomoyo_globally_readable_list_lock);
 
@@ -166,7 +219,6 @@ static int tomoyo_update_globally_readable_entry(const char *filename,
 	saved_filename = tomoyo_save_name(filename);
 	if (!saved_filename)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_globally_readable_list_lock);
 	list_for_each_entry(ptr, &tomoyo_globally_readable_list, list) {
 		if (ptr->filename != saved_filename)
@@ -187,7 +239,6 @@ static int tomoyo_update_globally_readable_entry(const char *filename,
 	error = 0;
  out:
 	up_write(&tomoyo_globally_readable_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -249,17 +300,44 @@ bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head)
 				 list);
 		if (ptr->is_deleted)
 			continue;
-		if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n",
-				      ptr->filename->name)) {
-			done = false;
+		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n",
+					ptr->filename->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_globally_readable_list_lock);
 	return done;
 }
 
-/* The list for "struct tomoyo_pattern_entry". */
+/* tomoyo_pattern_list is used for holding list of pathnames which are used for
+ * converting pathnames to pathname patterns during learning mode.
+ *
+ * An entry is added by
+ *
+ * # echo 'file_pattern /proc/\$/mounts' > \
+ *                             /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and is deleted by
+ *
+ * # echo 'delete file_pattern /proc/\$/mounts' > \
+ *                             /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # grep ^file_pattern /sys/kernel/security/tomoyo/exception_policy
+ *
+ * In the example above, if a process which belongs to a domain which is in
+ * learning mode requested open("/proc/1/mounts", O_RDONLY),
+ * "allow_read /proc/\$/mounts" is automatically added to the domain which that
+ * process belongs to.
+ *
+ * It is not a desirable behavior that we have to use /proc/\$/ instead of
+ * /proc/self/ when current process needs to access only current process's
+ * information. As of now, LSM version of TOMOYO is using __d_path() for
+ * calculating pathname. Non LSM version of TOMOYO is using its own function
+ * which pretends as if /proc/self/ is not a symlink; so that we can forbid
+ * current process from accessing other process's information.
+ */
 static LIST_HEAD(tomoyo_pattern_list);
 static DECLARE_RWSEM(tomoyo_pattern_list_lock);
 
@@ -284,7 +362,6 @@ static int tomoyo_update_file_pattern_entry(const char *pattern,
 	saved_pattern = tomoyo_save_name(pattern);
 	if (!saved_pattern)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_pattern_list_lock);
 	list_for_each_entry(ptr, &tomoyo_pattern_list, list) {
 		if (saved_pattern != ptr->pattern)
@@ -305,7 +382,6 @@ static int tomoyo_update_file_pattern_entry(const char *pattern,
 	error = 0;
  out:
 	up_write(&tomoyo_pattern_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -373,17 +449,44 @@ bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head)
 		ptr = list_entry(pos, struct tomoyo_pattern_entry, list);
 		if (ptr->is_deleted)
 			continue;
-		if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN "%s\n",
-				      ptr->pattern->name)) {
-			done = false;
+		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN
+					"%s\n", ptr->pattern->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_pattern_list_lock);
 	return done;
 }
 
-/* The list for "struct tomoyo_no_rewrite_entry". */
+/*
+ * tomoyo_no_rewrite_list is used for holding list of pathnames which are by
+ * default forbidden to modify already written content of a file.
+ *
+ * An entry is added by
+ *
+ * # echo 'deny_rewrite /var/log/messages' > \
+ *                              /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and is deleted by
+ *
+ * # echo 'delete deny_rewrite /var/log/messages' > \
+ *                              /sys/kernel/security/tomoyo/exception_policy
+ *
+ * and all entries are retrieved by
+ *
+ * # grep ^deny_rewrite /sys/kernel/security/tomoyo/exception_policy
+ *
+ * In the example above, if a process requested to rewrite /var/log/messages ,
+ * the process can't rewrite unless the domain which that process belongs to
+ * has "allow_rewrite /var/log/messages" entry.
+ *
+ * It is not a desirable behavior that we have to add "\040(deleted)" suffix
+ * when we want to allow rewriting already unlink()ed file. As of now,
+ * LSM version of TOMOYO is using __d_path() for calculating pathname.
+ * Non LSM version of TOMOYO is using its own function which doesn't append
+ * " (deleted)" suffix if the file is already unlink()ed; so that we don't
+ * need to worry whether the file is already unlink()ed or not.
+ */
 static LIST_HEAD(tomoyo_no_rewrite_list);
 static DECLARE_RWSEM(tomoyo_no_rewrite_list_lock);
 
@@ -407,7 +510,6 @@ static int tomoyo_update_no_rewrite_entry(const char *pattern,
 	saved_pattern = tomoyo_save_name(pattern);
 	if (!saved_pattern)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_no_rewrite_list_lock);
 	list_for_each_entry(ptr, &tomoyo_no_rewrite_list, list) {
 		if (ptr->pattern != saved_pattern)
@@ -428,7 +530,6 @@ static int tomoyo_update_no_rewrite_entry(const char *pattern,
 	error = 0;
  out:
 	up_write(&tomoyo_no_rewrite_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -489,11 +590,10 @@ bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head)
 		ptr = list_entry(pos, struct tomoyo_no_rewrite_entry, list);
 		if (ptr->is_deleted)
 			continue;
-		if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE "%s\n",
-				      ptr->pattern->name)) {
-			done = false;
+		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE
+					"%s\n", ptr->pattern->name);
+		if (!done)
 			break;
-		}
 	}
 	up_read(&tomoyo_no_rewrite_list_lock);
 	return done;
@@ -745,7 +845,6 @@ static int tomoyo_update_single_path_acl(const u8 type, const char *filename,
 	saved_filename = tomoyo_save_name(filename);
 	if (!saved_filename)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_domain_acl_info_list_lock);
 	if (is_delete)
 		goto delete;
@@ -800,7 +899,6 @@ static int tomoyo_update_single_path_acl(const u8 type, const char *filename,
 	}
  out:
 	up_write(&tomoyo_domain_acl_info_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -836,7 +934,6 @@ static int tomoyo_update_double_path_acl(const u8 type, const char *filename1,
 	saved_filename2 = tomoyo_save_name(filename2);
 	if (!saved_filename1 || !saved_filename2)
 		return -ENOMEM;
-	/***** EXCLUSIVE SECTION START *****/
 	down_write(&tomoyo_domain_acl_info_list_lock);
 	if (is_delete)
 		goto delete;
@@ -884,7 +981,6 @@ static int tomoyo_update_double_path_acl(const u8 type, const char *filename1,
 	}
  out:
 	up_write(&tomoyo_domain_acl_info_list_lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return error;
 }
 
@@ -1025,13 +1121,11 @@ int tomoyo_check_file_perm(struct tomoyo_domain_info *domain,
  *
  * @domain:   Pointer to "struct tomoyo_domain_info".
  * @filename: Check permission for "execute".
- * @tmp:      Buffer for temporary use.
  *
  * Returns 0 on success, negativevalue otherwise.
  */
 int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
-			   const struct tomoyo_path_info *filename,
-			   struct tomoyo_page_buffer *tmp)
+			   const struct tomoyo_path_info *filename)
 {
 	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
 
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index 40927a84cb6..5f2e3326337 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -220,7 +220,6 @@ void *tomoyo_alloc_element(const unsigned int size)
 		= roundup(size, max(sizeof(void *), sizeof(long)));
 	if (word_aligned_size > PATH_MAX)
 		return NULL;
-	/***** EXCLUSIVE SECTION START *****/
 	mutex_lock(&lock);
 	if (buf_used_len + word_aligned_size > PATH_MAX) {
 		if (!tomoyo_quota_for_elements ||
@@ -251,7 +250,6 @@ void *tomoyo_alloc_element(const unsigned int size)
 		}
 	}
 	mutex_unlock(&lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return ptr;
 }
 
@@ -267,7 +265,16 @@ static unsigned int tomoyo_quota_for_savename;
  */
 #define TOMOYO_MAX_HASH 256
 
-/* Structure for string data. */
+/*
+ * tomoyo_name_entry is a structure which is used for linking
+ * "struct tomoyo_path_info" into tomoyo_name_list .
+ *
+ * Since tomoyo_name_list manages a list of strings which are shared by
+ * multiple processes (whereas "struct tomoyo_path_info" inside
+ * "struct tomoyo_path_info_with_data" is not shared), a reference counter will
+ * be added to "struct tomoyo_name_entry" rather than "struct tomoyo_path_info"
+ * when TOMOYO starts supporting garbage collector.
+ */
 struct tomoyo_name_entry {
 	struct list_head list;
 	struct tomoyo_path_info entry;
@@ -281,10 +288,10 @@ struct tomoyo_free_memory_block_list {
 };
 
 /*
- * The list for "struct tomoyo_name_entry".
- *
- * This list is updated only inside tomoyo_save_name(), thus
- * no global mutex exists.
+ * tomoyo_name_list is used for holding string data used by TOMOYO.
+ * Since same string data is likely used for multiple times (e.g.
+ * "/lib/libc-2.5.so"), TOMOYO shares string data in the form of
+ * "const struct tomoyo_path_info *".
  */
 static struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
 
@@ -318,7 +325,6 @@ const struct tomoyo_path_info *tomoyo_save_name(const char *name)
 		return NULL;
 	}
 	hash = full_name_hash((const unsigned char *) name, len - 1);
-	/***** EXCLUSIVE SECTION START *****/
 	mutex_lock(&lock);
 	list_for_each_entry(ptr, &tomoyo_name_list[hash % TOMOYO_MAX_HASH],
 			     list) {
@@ -366,7 +372,6 @@ const struct tomoyo_path_info *tomoyo_save_name(const char *name)
 	}
  out:
 	mutex_unlock(&lock);
-	/***** EXCLUSIVE SECTION END *****/
 	return ptr ? &ptr->entry : NULL;
 }
 
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 5b481912752..3194d09fe0f 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -27,6 +27,12 @@ static int tomoyo_cred_prepare(struct cred *new, const struct cred *old,
 
 static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
 {
+	int rc;
+
+	rc = cap_bprm_set_creds(bprm);
+	if (rc)
+		return rc;
+
 	/*
 	 * Do only if this function is called for the first time of an execve
 	 * operation.
@@ -256,6 +262,10 @@ static int tomoyo_dentry_open(struct file *f, const struct cred *cred)
 	return tomoyo_check_open_permission(tomoyo_domain(), &f->f_path, flags);
 }
 
+/*
+ * tomoyo_security_ops is a "struct security_operations" which is used for
+ * registering TOMOYO.
+ */
 static struct security_operations tomoyo_security_ops = {
 	.name                = "tomoyo",
 	.cred_prepare        = tomoyo_cred_prepare,
diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h
index 41c6ebafb9c..0fd588a629c 100644
--- a/security/tomoyo/tomoyo.h
+++ b/security/tomoyo/tomoyo.h
@@ -17,13 +17,11 @@ struct path;
 struct inode;
 struct linux_binprm;
 struct pt_regs;
-struct tomoyo_page_buffer;
 
 int tomoyo_check_file_perm(struct tomoyo_domain_info *domain,
 			   const char *filename, const u8 perm);
 int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
-			   const struct tomoyo_path_info *filename,
-			   struct tomoyo_page_buffer *buf);
+			   const struct tomoyo_path_info *filename);
 int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
 				 struct path *path, const int flag);
 int tomoyo_check_1path_perm(struct tomoyo_domain_info *domain,
@@ -90,17 +88,10 @@ static inline struct tomoyo_domain_info *tomoyo_domain(void)
 	return current_cred()->security;
 }
 
-/* Caller holds tasklist_lock spinlock. */
 static inline struct tomoyo_domain_info *tomoyo_real_domain(struct task_struct
 							    *task)
 {
-	/***** CRITICAL SECTION START *****/
-	const struct cred *cred = get_task_cred(task);
-	struct tomoyo_domain_info *domain = cred->security;
-
-	put_cred(cred);
-	return domain;
-	/***** CRITICAL SECTION END *****/
+	return task_cred_xxx(task, security);
 }
 
 #endif /* !defined(_SECURITY_TOMOYO_TOMOYO_H) */
diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
index fbf5c933baa..586965f9605 100644
--- a/sound/aoa/fabrics/layout.c
+++ b/sound/aoa/fabrics/layout.c
@@ -1037,7 +1037,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
 	}
 	ldev->selfptr_headphone.ptr = ldev;
 	ldev->selfptr_lineout.ptr = ldev;
-	sdev->ofdev.dev.driver_data = ldev;
+	dev_set_drvdata(&sdev->ofdev.dev, ldev);
 	list_add(&ldev->list, &layouts_list);
 	layouts_list_items++;
 
@@ -1081,7 +1081,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
 
 static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 	int i;
 
 	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
@@ -1114,7 +1114,7 @@ static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
 #ifdef CONFIG_PM
 static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 
 	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
 		ldev->gpio.methods->all_amps_off(&ldev->gpio);
@@ -1124,7 +1124,7 @@ static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t sta
 
 static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
 {
-	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev);
 
 	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
 		ldev->gpio.methods->all_amps_restore(&ldev->gpio);
diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index 418c84c99d6..4e3b819d499 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -358,14 +358,14 @@ static int i2sbus_probe(struct macio_dev* dev, const struct of_device_id *match)
 		return -ENODEV;
 	}
 
-	dev->ofdev.dev.driver_data = control;
+	dev_set_drvdata(&dev->ofdev.dev, control);
 
 	return 0;
 }
 
 static int i2sbus_remove(struct macio_dev* dev)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct i2sbus_dev *i2sdev, *tmp;
 
 	list_for_each_entry_safe(i2sdev, tmp, &control->list, item)
@@ -377,7 +377,7 @@ static int i2sbus_remove(struct macio_dev* dev)
 #ifdef CONFIG_PM
 static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct codec_info_item *cii;
 	struct i2sbus_dev* i2sdev;
 	int err, ret = 0;
@@ -407,7 +407,7 @@ static int i2sbus_suspend(struct macio_dev* dev, pm_message_t state)
 
 static int i2sbus_resume(struct macio_dev* dev)
 {
-	struct i2sbus_control *control = dev->ofdev.dev.driver_data;
+	struct i2sbus_control *control = dev_get_drvdata(&dev->ofdev.dev);
 	struct codec_info_item *cii;
 	struct i2sbus_dev* i2sdev;
 	int err, ret = 0;
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 7fbd68fab94..dc78272fc39 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1074,7 +1074,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
 	return i;
 }
 
-static int __devinit aaci_probe(struct amba_device *dev, void *id)
+static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct aaci *aaci;
 	int ret, i;
@@ -1089,7 +1089,7 @@ static int __devinit aaci_probe(struct amba_device *dev, void *id)
 		goto out;
 	}
 
-	aaci->base = ioremap(dev->res.start, SZ_4K);
+	aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!aaci->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index a2c12d105c9..6fdca97186e 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -65,7 +65,7 @@ static void set_resetgpio_mode(int resetgpio_action)
 		switch (resetgpio_action) {
 		case RESETGPIO_NORMAL_ALTFUNC:
 			if (reset_gpio == 113)
-				mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+				mode = 113 | GPIO_ALT_FN_2_OUT;
 			if (reset_gpio == 95)
 				mode = 95 | GPIO_ALT_FN_1_OUT;
 			break;
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 7bbdda041a9..6061fb5f4e1 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -205,3 +205,5 @@ config SND_PCM_XRUN_DEBUG
 
 config SND_VMASTER
 	bool
+
+source "sound/core/seq/Kconfig"
diff --git a/sound/core/init.c b/sound/core/init.c
index fd56afe846e..d5d40d78c40 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -152,15 +152,8 @@ int snd_card_create(int idx, const char *xid,
 	card = kzalloc(sizeof(*card) + extra_size, GFP_KERNEL);
 	if (!card)
 		return -ENOMEM;
-	if (xid) {
-		if (!snd_info_check_reserved_words(xid)) {
-			snd_printk(KERN_ERR
-				   "given id string '%s' is reserved.\n", xid);
-			err = -EBUSY;
-			goto __error;
-		}
+	if (xid)
 		strlcpy(card->id, xid, sizeof(card->id));
-	}
 	err = 0;
 	mutex_lock(&snd_card_mutex);
 	if (idx < 0) {
@@ -483,22 +476,28 @@ int snd_card_free(struct snd_card *card)
 
 EXPORT_SYMBOL(snd_card_free);
 
-static void choose_default_id(struct snd_card *card)
+static void snd_card_set_id_no_lock(struct snd_card *card, const char *nid)
 {
 	int i, len, idx_flag = 0, loops = SNDRV_CARDS;
-	char *id, *spos;
+	const char *spos, *src;
+	char *id;
 	
-	id = spos = card->shortname;	
-	while (*id != '\0') {
-		if (*id == ' ')
-			spos = id + 1;
-		id++;
+	if (nid == NULL) {
+		id = card->shortname;
+		spos = src = id;
+		while (*id != '\0') {
+			if (*id == ' ')
+				spos = id + 1;
+			id++;
+		}
+	} else {
+		spos = src = nid;
 	}
 	id = card->id;
 	while (*spos != '\0' && !isalnum(*spos))
 		spos++;
 	if (isdigit(*spos))
-		*id++ = isalpha(card->shortname[0]) ? card->shortname[0] : 'D';
+		*id++ = isalpha(src[0]) ? src[0] : 'D';
 	while (*spos != '\0' && (size_t)(id - card->id) < sizeof(card->id) - 1) {
 		if (isalnum(*spos))
 			*id++ = *spos;
@@ -513,7 +512,7 @@ static void choose_default_id(struct snd_card *card)
 
 	while (1) {
 	      	if (loops-- == 0) {
-      			snd_printk(KERN_ERR "unable to choose default card id (%s)\n", id);
+			snd_printk(KERN_ERR "unable to set card id (%s)\n", id);
       			strcpy(card->id, card->proc_root->name);
       			return;
       		}
@@ -539,14 +538,33 @@ static void choose_default_id(struct snd_card *card)
 			spos = id + len - 2;
 			if ((size_t)len <= sizeof(card->id) - 2)
 				spos++;
-			*spos++ = '_';
-			*spos++ = '1';
-			*spos++ = '\0';
+			*(char *)spos++ = '_';
+			*(char *)spos++ = '1';
+			*(char *)spos++ = '\0';
 			idx_flag++;
 		}
 	}
 }
 
+/**
+ *  snd_card_set_id - set card identification name
+ *  @card: soundcard structure
+ *  @nid: new identification string
+ *
+ *  This function sets the card identification and checks for name
+ *  collisions.
+ */
+void snd_card_set_id(struct snd_card *card, const char *nid)
+{
+	/* check if user specified own card->id */
+	if (card->id[0] != '\0')
+		return;
+	mutex_lock(&snd_card_mutex);
+	snd_card_set_id_no_lock(card, nid);
+	mutex_unlock(&snd_card_mutex);
+}
+EXPORT_SYMBOL(snd_card_set_id);
+
 #ifndef CONFIG_SYSFS_DEPRECATED
 static ssize_t
 card_id_show_attr(struct device *dev,
@@ -640,8 +658,7 @@ int snd_card_register(struct snd_card *card)
 		mutex_unlock(&snd_card_mutex);
 		return 0;
 	}
-	if (card->id[0] == '\0')
-		choose_default_id(card);
+	snd_card_set_id_no_lock(card, card->id[0] == '\0' ? NULL : card->id);
 	snd_cards[card->number] = card;
 	mutex_unlock(&snd_card_mutex);
 	init_info_for_card(card);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index d54d1a05fe6..f705eec7372 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -63,7 +63,7 @@ static int snd_jack_dev_register(struct snd_device *device)
 
 	/* Default to the sound card device. */
 	if (!jack->input_dev->dev.parent)
-		jack->input_dev->dev.parent = card->dev;
+		jack->input_dev->dev.parent = snd_card_get_device_link(card);
 
 	err = input_register_device(jack->input_dev);
 	if (err == 0)
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index dda000b9684..dbe406b8259 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -31,6 +31,7 @@
 #include <linux/time.h>
 #include <linux/vmalloc.h>
 #include <linux/moduleparam.h>
+#include <linux/math64.h>
 #include <linux/string.h>
 #include <sound/core.h>
 #include <sound/minors.h>
@@ -617,9 +618,7 @@ static long snd_pcm_oss_bytes(struct snd_pcm_substream *substream, long frames)
 #else
 	{
 		u64 bsize = (u64)runtime->oss.buffer_bytes * (u64)bytes;
-		u32 rem;
-		div64_32(&bsize, buffer_size, &rem);
-		return (long)bsize;
+		return div_u64(bsize, buffer_size);
 	}
 #endif
 }
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a2a792c18c4..333e4dd2945 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -22,6 +22,7 @@
 
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/math64.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/info.h>
@@ -126,24 +127,37 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram
 }
 
 #ifdef CONFIG_SND_PCM_XRUN_DEBUG
-#define xrun_debug(substream)	((substream)->pstr->xrun_debug)
+#define xrun_debug(substream, mask)	((substream)->pstr->xrun_debug & (mask))
 #else
-#define xrun_debug(substream)	0
+#define xrun_debug(substream, mask)	0
 #endif
 
-#define dump_stack_on_xrun(substream) do {	\
-		if (xrun_debug(substream) > 1)	\
-			dump_stack();		\
+#define dump_stack_on_xrun(substream) do {		\
+		if (xrun_debug(substream, 2))		\
+			dump_stack();			\
 	} while (0)
 
+static void pcm_debug_name(struct snd_pcm_substream *substream,
+			   char *name, size_t len)
+{
+	snprintf(name, len, "pcmC%dD%d%c:%d",
+		 substream->pcm->card->number,
+		 substream->pcm->device,
+		 substream->stream ? 'c' : 'p',
+		 substream->number);
+}
+
 static void xrun(struct snd_pcm_substream *substream)
 {
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 	snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-	if (xrun_debug(substream)) {
-		snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n",
-			   substream->pcm->card->number,
-			   substream->pcm->device,
-			   substream->stream ? 'c' : 'p');
+	if (xrun_debug(substream, 1)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd(KERN_DEBUG "XRUN: %s\n", name);
 		dump_stack_on_xrun(substream);
 	}
 }
@@ -154,16 +168,16 @@ snd_pcm_update_hw_ptr_pos(struct snd_pcm_substream *substream,
 {
 	snd_pcm_uframes_t pos;
 
-	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
-		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 	pos = substream->ops->pointer(substream);
 	if (pos == SNDRV_PCM_POS_XRUN)
 		return pos; /* XRUN */
 	if (pos >= runtime->buffer_size) {
 		if (printk_ratelimit()) {
-			snd_printd(KERN_ERR  "BUG: stream = %i, pos = 0x%lx, "
+			char name[16];
+			pcm_debug_name(substream, name, sizeof(name));
+			snd_printd(KERN_ERR  "BUG: %s, pos = 0x%lx, "
 				   "buffer size = 0x%lx, period size = 0x%lx\n",
-				   substream->stream, pos, runtime->buffer_size,
+				   name, pos, runtime->buffer_size,
 				   runtime->period_size);
 		}
 		pos = 0;
@@ -197,7 +211,7 @@ static int snd_pcm_update_hw_ptr_post(struct snd_pcm_substream *substream,
 
 #define hw_ptr_error(substream, fmt, args...)				\
 	do {								\
-		if (xrun_debug(substream)) {				\
+		if (xrun_debug(substream, 1)) {				\
 			if (printk_ratelimit()) {			\
 				snd_printd("PCM: " fmt, ##args);	\
 			}						\
@@ -249,6 +263,11 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 			new_hw_ptr = hw_base + pos;
 		}
 	}
+
+	/* Do jiffies check only in xrun_debug mode */
+	if (!xrun_debug(substream, 4))
+		goto no_jiffies_check;
+
 	/* Skip the jiffies check for hardwares with BATCH flag.
 	 * Such hardware usually just increases the position at each IRQ,
 	 * thus it can't give any strange position.
@@ -256,6 +275,9 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 	if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
 		goto no_jiffies_check;
 	hdelta = new_hw_ptr - old_hw_ptr;
+	if (hdelta < runtime->delay)
+		goto no_jiffies_check;
+	hdelta -= runtime->delay;
 	jdelta = jiffies - runtime->hw_ptr_jiffies;
 	if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		delta = jdelta /
@@ -289,14 +311,20 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 		hw_ptr_interrupt =
 			new_hw_ptr - new_hw_ptr % runtime->period_size;
 	}
+	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, new_hw_ptr);
 
+	if (runtime->status->hw_ptr == new_hw_ptr)
+		return 0;
+
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
 	runtime->hw_ptr_jiffies = jiffies;
-	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -336,6 +364,12 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 			hw_base = 0;
 		new_hw_ptr = hw_base + pos;
 	}
+	/* Do jiffies check only in xrun_debug mode */
+	if (!xrun_debug(substream, 4))
+		goto no_jiffies_check;
+	if (delta < runtime->delay)
+		goto no_jiffies_check;
+	delta -= runtime->delay;
 	if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		hw_ptr_error(substream,
 			     "hw_ptr skipping! "
@@ -345,13 +379,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 			     ((delta * HZ) / runtime->rate));
 		return 0;
 	}
+ no_jiffies_check:
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
 		snd_pcm_playback_silence(substream, new_hw_ptr);
 
+	if (runtime->status->hw_ptr == new_hw_ptr)
+		return 0;
+
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
 	runtime->hw_ptr_jiffies = jiffies;
+	if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
+		snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -445,7 +485,7 @@ static inline unsigned int muldiv32(unsigned int a, unsigned int b,
 		*r = 0;
 		return UINT_MAX;
 	}
-	div64_32(&n, c, r);
+	n = div_u64_rem(n, c, r);
 	if (n >= UINT_MAX) {
 		*r = 0;
 		return UINT_MAX;
@@ -1478,7 +1518,6 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream,
 		runtime->status->hw_ptr %= runtime->buffer_size;
 	else
 		runtime->status->hw_ptr = 0;
-	runtime->hw_ptr_jiffies = jiffies;
 	snd_pcm_stream_unlock_irqrestore(substream, flags);
 	return 0;
 }
@@ -1518,6 +1557,23 @@ static int snd_pcm_lib_ioctl_channel_info(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
+				       void *arg)
+{
+	struct snd_pcm_hw_params *params = arg;
+	snd_pcm_format_t format;
+	int channels, width;
+
+	params->fifo_size = substream->runtime->hw.fifo_size;
+	if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) {
+		format = params_format(params);
+		channels = params_channels(params);
+		width = snd_pcm_format_physical_width(format);
+		params->fifo_size /= width * channels;
+	}
+	return 0;
+}
+
 /**
  * snd_pcm_lib_ioctl - a generic PCM ioctl callback
  * @substream: the pcm substream instance
@@ -1539,6 +1595,8 @@ int snd_pcm_lib_ioctl(struct snd_pcm_substream *substream,
 		return snd_pcm_lib_ioctl_reset(substream, arg);
 	case SNDRV_PCM_IOCTL1_CHANNEL_INFO:
 		return snd_pcm_lib_ioctl_channel_info(substream, arg);
+	case SNDRV_PCM_IOCTL1_FIFO_SIZE:
+		return snd_pcm_lib_ioctl_fifo_size(substream, arg);
 	}
 	return -ENXIO;
 }
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index fc6f98e257d..84da3ba17c8 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -312,9 +312,18 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream,
 
 	hw = &substream->runtime->hw;
 	if (!params->info)
-		params->info = hw->info;
-	if (!params->fifo_size)
-		params->fifo_size = hw->fifo_size;
+		params->info = hw->info & ~SNDRV_PCM_INFO_FIFO_IN_FRAMES;
+	if (!params->fifo_size) {
+		if (snd_mask_min(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT]) ==
+		    snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT]) &&
+                    snd_mask_min(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS]) ==
+                    snd_mask_max(&params->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
+			changed = substream->ops->ioctl(substream,
+					SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
+			if (params < 0)
+				return changed;
+		}
+	}
 	params->rmask = 0;
 	return 0;
 }
@@ -587,14 +596,15 @@ int snd_pcm_status(struct snd_pcm_substream *substream,
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		status->avail = snd_pcm_playback_avail(runtime);
 		if (runtime->status->state == SNDRV_PCM_STATE_RUNNING ||
-		    runtime->status->state == SNDRV_PCM_STATE_DRAINING)
+		    runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
 			status->delay = runtime->buffer_size - status->avail;
-		else
+			status->delay += runtime->delay;
+		} else
 			status->delay = 0;
 	} else {
 		status->avail = snd_pcm_capture_avail(runtime);
 		if (runtime->status->state == SNDRV_PCM_STATE_RUNNING)
-			status->delay = status->avail;
+			status->delay = status->avail + runtime->delay;
 		else
 			status->delay = 0;
 	}
@@ -848,6 +858,7 @@ static void snd_pcm_post_start(struct snd_pcm_substream *substream, int state)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	snd_pcm_trigger_tstamp(substream);
+	runtime->hw_ptr_jiffies = jiffies;
 	runtime->status->state = state;
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
 	    runtime->silence_size > 0)
@@ -961,6 +972,11 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push)
 {
 	if (substream->runtime->trigger_master != substream)
 		return 0;
+	/* The jiffies check in snd_pcm_update_hw_ptr*() is done by
+	 * a delta betwen the current jiffies, this gives a large enough
+	 * delta, effectively to skip the check once.
+	 */
+	substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
 	return substream->ops->trigger(substream,
 				       push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH :
 					      SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
@@ -2404,6 +2420,7 @@ static int snd_pcm_delay(struct snd_pcm_substream *substream,
 			n = snd_pcm_playback_hw_avail(runtime);
 		else
 			n = snd_pcm_capture_avail(runtime);
+		n += runtime->delay;
 		break;
 	case SNDRV_PCM_STATE_XRUN:
 		err = -EPIPE;
diff --git a/sound/core/seq/Kconfig b/sound/core/seq/Kconfig
new file mode 100644
index 00000000000..b851fd890a8
--- /dev/null
+++ b/sound/core/seq/Kconfig
@@ -0,0 +1,16 @@
+# define SND_XXX_SEQ to min(SND_SEQUENCER,SND_XXX)
+
+config SND_RAWMIDI_SEQ
+	def_tristate SND_SEQUENCER && SND_RAWMIDI
+
+config SND_OPL3_LIB_SEQ
+	def_tristate SND_SEQUENCER && SND_OPL3_LIB
+
+config SND_OPL4_LIB_SEQ
+	def_tristate SND_SEQUENCER && SND_OPL4_LIB
+
+config SND_SBAWE_SEQ
+	def_tristate SND_SEQUENCER && SND_SBAWE
+
+config SND_EMU10K1_SEQ
+	def_tristate SND_SEQUENCER && SND_EMU10K1
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 069593717fb..1bcb360330e 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -17,14 +17,6 @@ snd-seq-midi-event-objs := seq_midi_event.o
 snd-seq-dummy-objs := seq_dummy.o
 snd-seq-virmidi-objs := seq_virmidi.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
 ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
@@ -33,8 +25,8 @@ obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_VIRMIDI) += snd-seq-virmidi.o snd-seq-midi-event.o
-obj-$(call sequencer,$(CONFIG_SND_RAWMIDI)) += snd-seq-midi.o snd-seq-midi-event.o
-obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o
-obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-seq-midi-emul.o snd-seq-virmidi.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-seq-midi-emul.o snd-seq-virmidi.o
+obj-$(CONFIG_SND_RAWMIDI_SEQ) += snd-seq-midi.o snd-seq-midi-event.o
+obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o
+obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-seq-midi-event.o snd-seq-midi-emul.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-seq-midi-emul.o snd-seq-virmidi.o
diff --git a/sound/drivers/opl3/Makefile b/sound/drivers/opl3/Makefile
index 19767a6a5c5..7f2c2a10c4e 100644
--- a/sound/drivers/opl3/Makefile
+++ b/sound/drivers/opl3/Makefile
@@ -7,14 +7,6 @@ snd-opl3-lib-objs := opl3_lib.o opl3_synth.o
 snd-opl3-synth-y := opl3_seq.o opl3_midi.o opl3_drums.o
 snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_OPL3_LIB) += snd-opl3-lib.o
 obj-$(CONFIG_SND_OPL4_LIB) += snd-opl3-lib.o
-obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-opl3-synth.o
+obj-$(CONFIG_SND_OPL3_LIB_SEQ) += snd-opl3-synth.o
diff --git a/sound/drivers/opl4/Makefile b/sound/drivers/opl4/Makefile
index d178b39ffa6..b94009b0b19 100644
--- a/sound/drivers/opl4/Makefile
+++ b/sound/drivers/opl4/Makefile
@@ -6,13 +6,5 @@
 snd-opl4-lib-objs := opl4_lib.o opl4_mixer.o opl4_proc.o
 snd-opl4-synth-objs := opl4_seq.o opl4_synth.o yrw801.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 obj-$(CONFIG_SND_OPL4_LIB) += snd-opl4-lib.o
-obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-opl4-synth.o
+obj-$(CONFIG_SND_OPL4_LIB_SEQ) += snd-opl4-synth.o
diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index caeb0f57fcc..199b0337714 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,8 +50,8 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol,
 	uinfo->value.enumerated.items = chip->max_treble + 1;
 	if (uinfo->value.enumerated.item > chip->max_treble)
 		uinfo->value.enumerated.item = chip->max_treble;
-	sprintf(uinfo->value.enumerated.name, "%d",
-			PCSP_CALC_RATE(uinfo->value.enumerated.item));
+	sprintf(uinfo->value.enumerated.name, "%lu",
+		(unsigned long)PCSP_CALC_RATE(uinfo->value.enumerated.item));
 	return 0;
 }
 
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index c6942a4de99..51a7e3777e1 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -177,15 +177,18 @@ config SND_ES18XX
 	  will be called snd-es18xx.
 
 config SND_SC6000
-	tristate "Gallant SC-6000, Audio Excel DSP 16"
+	tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
 	depends on HAS_IOPORT
 	select SND_WSS_LIB
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	help
-	  Say Y here to include support for Gallant SC-6000 card and clones:
+	  Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
+	  cards and clones:
 	  Audio Excel DSP 16 and Zoltrix AV302.
 
+	  These cards are based on CompuMedia ASC-9308 or ASC-9408 chips.
+
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-sc6000.
 
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 442b081cafb..07df201ed8f 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -193,7 +193,7 @@ static int __devexit snd_es1688_remove(struct device *dev, unsigned int n)
 static struct isa_driver snd_es1688_driver = {
 	.match		= snd_es1688_match,
 	.probe		= snd_es1688_probe,
-	.remove		= snd_es1688_remove,
+	.remove		= __devexit_p(snd_es1688_remove),
 #if 0	/* FIXME */
 	.suspend	= snd_es1688_suspend,
 	.resume		= snd_es1688_resume,
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 180a8dea6bd..65e4b18581a 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -348,7 +348,7 @@ static int __devexit snd_gusextreme_remove(struct device *dev, unsigned int n)
 static struct isa_driver snd_gusextreme_driver = {
 	.match		= snd_gusextreme_match,
 	.probe		= snd_gusextreme_probe,
-	.remove		= snd_gusextreme_remove,
+	.remove		= __devexit_p(snd_gusextreme_remove),
 #if 0	/* FIXME */
 	.suspend	= snd_gusextreme_suspend,
 	.resume		= snd_gusextreme_resume,
diff --git a/sound/isa/sb/Makefile b/sound/isa/sb/Makefile
index 1098a56b2f4..faeffceb01b 100644
--- a/sound/isa/sb/Makefile
+++ b/sound/isa/sb/Makefile
@@ -13,14 +13,6 @@ snd-sbawe-objs := sbawe.o emu8000.o
 snd-emu8000-synth-objs := emu8000_synth.o emu8000_callback.o emu8000_patch.o emu8000_pcm.o
 snd-es968-objs := es968.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_SB_COMMON) += snd-sb-common.o
 obj-$(CONFIG_SND_SB16_DSP) += snd-sb16-dsp.o
@@ -33,4 +25,4 @@ ifeq ($(CONFIG_SND_SB16_CSP),y)
   obj-$(CONFIG_SND_SB16) += snd-sb16-csp.o
   obj-$(CONFIG_SND_SBAWE) += snd-sb16-csp.o
 endif
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emu8000-synth.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emu8000-synth.o
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index 782010608ef..9a8bbf6dd62 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -2,6 +2,8 @@
  *  Driver for Gallant SC-6000 soundcard. This card is also known as
  *  Audio Excel DSP 16 or Zoltrix AV302.
  *  These cards use CompuMedia ASC-9308 chip + AD1848 codec.
+ *  SC-6600 and SC-7000 cards are also supported. They are based on
+ *  CompuMedia ASC-9408 chip and CS4231 codec.
  *
  *  Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
  *
@@ -54,6 +56,7 @@ static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
 						/* 0x300, 0x310, 0x320, 0x330 */
 static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;	/* 5, 7, 9, 10, 0 */
 static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;	/* 0, 1, 3 */
+static bool joystick[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = false };
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard.");
@@ -73,6 +76,8 @@ module_param_array(mpu_irq, int, NULL, 0444);
 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
 module_param_array(dma, int, NULL, 0444);
 MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
+module_param_array(joystick, bool, NULL, 0444);
+MODULE_PARM_DESC(joystick, "Enable gameport.");
 
 /*
  * Commands of SC6000's DSP (SBPRO+special).
@@ -191,7 +196,7 @@ static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
 	return val;
 }
 
-static __devinit int sc6000_wait_data(char __iomem *vport)
+static int sc6000_wait_data(char __iomem *vport)
 {
 	int loop = 1000;
 	unsigned char val = 0;
@@ -206,7 +211,7 @@ static __devinit int sc6000_wait_data(char __iomem *vport)
 	return -EAGAIN;
 }
 
-static __devinit int sc6000_read(char __iomem *vport)
+static int sc6000_read(char __iomem *vport)
 {
 	if (sc6000_wait_data(vport))
 		return -EBUSY;
@@ -215,7 +220,7 @@ static __devinit int sc6000_read(char __iomem *vport)
 
 }
 
-static __devinit int sc6000_write(char __iomem *vport, int cmd)
+static int sc6000_write(char __iomem *vport, int cmd)
 {
 	unsigned char val;
 	int loop = 500000;
@@ -276,8 +281,33 @@ static int __devinit sc6000_dsp_reset(char __iomem *vport)
 }
 
 /* detection and initialization */
-static int __devinit sc6000_cfg_write(char __iomem *vport,
-				      unsigned char softcfg)
+static int __devinit sc6000_hw_cfg_write(char __iomem *vport, const int *cfg)
+{
+	if (sc6000_write(vport, COMMAND_6C) < 0) {
+		snd_printk(KERN_WARNING "CMD 0x%x: failed!\n", COMMAND_6C);
+		return -EIO;
+	}
+	if (sc6000_write(vport, COMMAND_5C) < 0) {
+		snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_5C);
+		return -EIO;
+	}
+	if (sc6000_write(vport, cfg[0]) < 0) {
+		snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[0]);
+		return -EIO;
+	}
+	if (sc6000_write(vport, cfg[1]) < 0) {
+		snd_printk(KERN_ERR "DATA 0x%x: failed!\n", cfg[1]);
+		return -EIO;
+	}
+	if (sc6000_write(vport, COMMAND_C5) < 0) {
+		snd_printk(KERN_ERR "CMD 0x%x: failed!\n", COMMAND_C5);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sc6000_cfg_write(char __iomem *vport, unsigned char softcfg)
 {
 
 	if (sc6000_write(vport, WRITE_MDIRQ_CFG)) {
@@ -291,7 +321,7 @@ static int __devinit sc6000_cfg_write(char __iomem *vport,
 	return 0;
 }
 
-static int __devinit sc6000_setup_board(char __iomem *vport, int config)
+static int sc6000_setup_board(char __iomem *vport, int config)
 {
 	int loop = 10;
 
@@ -334,16 +364,39 @@ static int __devinit sc6000_init_mss(char __iomem *vport, int config,
 	return 0;
 }
 
-static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
-					char __iomem *vmss_port, int mpu_irq)
+static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg,
+					   long xport, long xmpu,
+					   long xmss_port, int joystick)
+{
+	cfg[0] = 0;
+	cfg[1] = 0;
+	if (xport == 0x240)
+		cfg[0] |= 1;
+	if (xmpu != SNDRV_AUTO_PORT) {
+		cfg[0] |= (xmpu & 0x30) >> 2;
+		cfg[1] |= 0x20;
+	}
+	if (xmss_port == 0xe80)
+		cfg[0] |= 0x10;
+	cfg[0] |= 0x40;		/* always set */
+	if (!joystick)
+		cfg[0] |= 0x02;
+	cfg[1] |= 0x80;		/* enable WSS system */
+	cfg[1] &= ~0x40;	/* disable IDE */
+	snd_printd("hw cfg %x, %x\n", cfg[0], cfg[1]);
+}
+
+static int __devinit sc6000_init_board(char __iomem *vport,
+					char __iomem *vmss_port, int dev)
 {
 	char answer[15];
 	char version[2];
-	int mss_config = sc6000_irq_to_softcfg(irq) |
-			 sc6000_dma_to_softcfg(dma);
+	int mss_config = sc6000_irq_to_softcfg(irq[dev]) |
+			 sc6000_dma_to_softcfg(dma[dev]);
 	int config = mss_config |
-		     sc6000_mpu_irq_to_softcfg(mpu_irq);
+		     sc6000_mpu_irq_to_softcfg(mpu_irq[dev]);
 	int err;
+	int old = 0;
 
 	err = sc6000_dsp_reset(vport);
 	if (err < 0) {
@@ -360,7 +413,6 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
 	/*
 	 * My SC-6000 card return "SC-6000" in DSPCopyright, so
 	 * if we have something different, we have to be warned.
-	 * Mine returns "SC-6000A " - KH
 	 */
 	if (strncmp("SC-6000", answer, 7))
 		snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n");
@@ -372,13 +424,32 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
 	printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n",
 		answer, version[0], version[1]);
 
-	/*
-	 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
-	 */
-	err = sc6000_cfg_write(vport, 0x0a);
+	/* set configuration */
+	sc6000_write(vport, COMMAND_5C);
+	if (sc6000_read(vport) < 0)
+		old = 1;
+
+	if (!old) {
+		int cfg[2];
+		sc6000_hw_cfg_encode(vport, &cfg[0], port[dev], mpu_port[dev],
+				     mss_port[dev], joystick[dev]);
+		if (sc6000_hw_cfg_write(vport, cfg) < 0) {
+			snd_printk(KERN_ERR "sc6000_hw_cfg_write: failed!\n");
+			return -EIO;
+		}
+	}
+	err = sc6000_setup_board(vport, config);
 	if (err < 0) {
-		snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
-		return -EFAULT;
+		snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
+		return -ENODEV;
+	}
+
+	sc6000_dsp_reset(vport);
+
+	if (!old) {
+		sc6000_write(vport, COMMAND_60);
+		sc6000_write(vport, 0x02);
+		sc6000_dsp_reset(vport);
 	}
 
 	err = sc6000_setup_board(vport, config);
@@ -386,10 +457,9 @@ static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
 		snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
 		return -ENODEV;
 	}
-
 	err = sc6000_init_mss(vport, config, vmss_port, mss_config);
 	if (err < 0) {
-		snd_printk(KERN_ERR "Can not initialize "
+		snd_printk(KERN_ERR "Cannot initialize "
 			   "Microsoft Sound System mode.\n");
 		return -ENODEV;
 	}
@@ -485,14 +555,16 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 	struct snd_card *card;
 	struct snd_wss *chip;
 	struct snd_opl3 *opl3;
-	char __iomem *vport;
+	char __iomem **vport;
 	char __iomem *vmss_port;
 
 
-	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(vport),
+				&card);
 	if (err < 0)
 		return err;
 
+	vport = card->private_data;
 	if (xirq == SNDRV_AUTO_IRQ) {
 		xirq = snd_legacy_find_free_irq(possible_irqs);
 		if (xirq < 0) {
@@ -517,8 +589,8 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		err = -EBUSY;
 		goto err_exit;
 	}
-	vport = devm_ioport_map(devptr, port[dev], 0x10);
-	if (!vport) {
+	*vport = devm_ioport_map(devptr, port[dev], 0x10);
+	if (*vport == NULL) {
 		snd_printk(KERN_ERR PFX
 			   "I/O port cannot be iomaped.\n");
 		err = -EBUSY;
@@ -533,7 +605,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		goto err_unmap1;
 	}
 	vmss_port = devm_ioport_map(devptr, mss_port[dev], 4);
-	if (!vport) {
+	if (!vmss_port) {
 		snd_printk(KERN_ERR PFX
 			   "MSS port I/O cannot be iomaped.\n");
 		err = -EBUSY;
@@ -544,7 +616,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 		   port[dev], xirq, xdma,
 		   mpu_irq[dev] == SNDRV_AUTO_IRQ ? 0 : mpu_irq[dev]);
 
-	err = sc6000_init_board(vport, xirq, xdma, vmss_port, mpu_irq[dev]);
+	err = sc6000_init_board(*vport, vmss_port, dev);
 	if (err < 0)
 		goto err_unmap2;
 
@@ -552,7 +624,6 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 			     WSS_HW_DETECT, 0, &chip);
 	if (err < 0)
 		goto err_unmap2;
-	card->private_data = chip;
 
 	err = snd_wss_pcm(chip, 0, NULL);
 	if (err < 0) {
@@ -608,6 +679,7 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
 	return 0;
 
 err_unmap2:
+	sc6000_setup_board(*vport, 0);
 	release_region(mss_port[dev], 4);
 err_unmap1:
 	release_region(port[dev], 0x10);
@@ -618,11 +690,17 @@ err_exit:
 
 static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
 {
+	struct snd_card *card = dev_get_drvdata(devptr);
+	char __iomem **vport = card->private_data;
+
+	if (sc6000_setup_board(*vport, 0) < 0)
+		snd_printk(KERN_WARNING "sc6000_setup_board failed on exit!\n");
+
 	release_region(port[dev], 0x10);
 	release_region(mss_port[dev], 4);
 
-	snd_card_free(dev_get_drvdata(devptr));
 	dev_set_drvdata(devptr, NULL);
+	snd_card_free(card);
 	return 0;
 }
 
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index 66f3b48ceaf..e497525bc11 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -619,8 +619,7 @@ static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
 /* hw_free callback */
 static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
 {
-	if (substream->runtime->dma_area)
-		vfree(substream->runtime->dma_area);
+	vfree(substream->runtime->dma_area);
 	substream->runtime->dma_area = NULL;
 	return 0;
 }
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 1ca7427c4b6..bcf2a0698d5 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -561,7 +561,7 @@ endif	# SOUND_OSS
 
 config SOUND_SH_DAC_AUDIO
 	tristate "SuperH DAC audio support"
-	depends on CPU_SH3
+	depends on CPU_SH3 && HIGH_RES_TIMERS
 
 config SOUND_SH_DAC_AUDIO_CHANNEL
 	int "DAC channel"
diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c
index e4282d93a1a..21eb6dce46d 100644
--- a/sound/oss/msnd.c
+++ b/sound/oss/msnd.c
@@ -100,7 +100,7 @@ void msnd_fifo_free(msnd_fifo *f)
 int msnd_fifo_alloc(msnd_fifo *f, size_t n)
 {
 	msnd_fifo_free(f);
-	f->data = (char *)vmalloc(n);
+	f->data = vmalloc(n);
 	f->n = n;
 	f->tail = 0;
 	f->head = 0;
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index 78cfb66e4c5..b2ed8757542 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -18,47 +18,36 @@
 #include <linux/sound.h>
 #include <linux/soundcard.h>
 #include <linux/interrupt.h>
+#include <linux/hrtimer.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
 #include <asm/clock.h>
-#include <asm/cpu/dac.h>
-#include <asm/cpu/timer.h>
+#include <cpu/dac.h>
 #include <asm/machvec.h>
 #include <mach/hp6xx.h>
 #include <asm/hd64461.h>
 
 #define MODNAME "sh_dac_audio"
 
-#define TMU_TOCR_INIT	0x00
-
-#define TMU1_TCR_INIT	0x0020	/* Clock/4, rising edge; interrupt on */
-#define TMU1_TSTR_INIT  0x02	/* Bit to turn on TMU1 */
-
 #define BUFFER_SIZE 48000
 
 static int rate;
 static int empty;
 static char *data_buffer, *buffer_begin, *buffer_end;
 static int in_use, device_major;
+static struct hrtimer hrtimer;
+static ktime_t wakeups_per_second;
 
 static void dac_audio_start_timer(void)
 {
-	u8 tstr;
-
-	tstr = ctrl_inb(TMU_TSTR);
-	tstr |= TMU1_TSTR_INIT;
-	ctrl_outb(tstr, TMU_TSTR);
+	hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL);
 }
 
 static void dac_audio_stop_timer(void)
 {
-	u8 tstr;
-
-	tstr = ctrl_inb(TMU_TSTR);
-	tstr &= ~TMU1_TSTR_INIT;
-	ctrl_outb(tstr, TMU_TSTR);
+	hrtimer_cancel(&hrtimer);
 }
 
 static void dac_audio_reset(void)
@@ -77,38 +66,30 @@ static void dac_audio_sync(void)
 static void dac_audio_start(void)
 {
 	if (mach_is_hp6xx()) {
-		u16 v = inw(HD64461_GPADR);
+		u16 v = __raw_readw(HD64461_GPADR);
 		v &= ~HD64461_GPADR_SPEAKER;
-		outw(v, HD64461_GPADR);
+		__raw_writew(v, HD64461_GPADR);
 	}
 
 	sh_dac_enable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
-	ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
 }
 static void dac_audio_stop(void)
 {
 	dac_audio_stop_timer();
 
 	if (mach_is_hp6xx()) {
-		u16 v = inw(HD64461_GPADR);
+		u16 v = __raw_readw(HD64461_GPADR);
 		v |= HD64461_GPADR_SPEAKER;
-		outw(v, HD64461_GPADR);
+		__raw_writew(v, HD64461_GPADR);
 	}
 
- 	sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
+	sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
 	sh_dac_disable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
 }
 
 static void dac_audio_set_rate(void)
 {
-	unsigned long interval;
- 	struct clk *clk;
-
- 	clk = clk_get(NULL, "module_clk");
- 	interval = (clk_get_rate(clk) / 4) / rate;
- 	clk_put(clk);
-	ctrl_outl(interval, TMU1_TCOR);
-	ctrl_outl(interval, TMU1_TCNT);
+	wakeups_per_second = ktime_set(0, 1000000000 / rate);
 }
 
 static int dac_audio_ioctl(struct inode *inode, struct file *file,
@@ -265,32 +246,26 @@ const struct file_operations dac_audio_fops = {
       .release =	dac_audio_release,
 };
 
-static irqreturn_t timer1_interrupt(int irq, void *dev)
+static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
 {
-	unsigned long timer_status;
-
-	timer_status = ctrl_inw(TMU1_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU1_TCR);
-
 	if (!empty) {
 		sh_dac_output(*buffer_begin, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
 		buffer_begin++;
 
 		if (buffer_begin == data_buffer + BUFFER_SIZE)
 			buffer_begin = data_buffer;
-		if (buffer_begin == buffer_end) {
+		if (buffer_begin == buffer_end)
 			empty = 1;
-			dac_audio_stop_timer();
-		}
 	}
-	return IRQ_HANDLED;
+
+	if (!empty)
+		hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL);
+
+	return HRTIMER_NORESTART;
 }
 
 static int __init dac_audio_init(void)
 {
-	int retval;
-
 	if ((device_major = register_sound_dsp(&dac_audio_fops, -1)) < 0) {
 		printk(KERN_ERR "Cannot register dsp device");
 		return device_major;
@@ -306,21 +281,25 @@ static int __init dac_audio_init(void)
 	rate = 8000;
 	dac_audio_set_rate();
 
-	retval =
-	    request_irq(TIMER1_IRQ, timer1_interrupt, IRQF_DISABLED, MODNAME, 0);
-	if (retval < 0) {
-		printk(KERN_ERR "sh_dac_audio: IRQ %d request failed\n",
-		       TIMER1_IRQ);
-		return retval;
-	}
+	/* Today: High Resolution Timer driven DAC playback.
+	 * The timer callback gets called once per sample. Ouch.
+	 *
+	 * Future: A much better approach would be to use the
+	 * SH7720 CMT+DMAC+DAC hardware combination like this:
+	 * - Program sample rate using CMT0 or CMT1
+	 * - Program DMAC to use CMT for timing and output to DAC
+	 * - Play sound using DMAC, let CPU sleep.
+	 * - While at it, rewrite this driver to use ALSA.
+	 */
+
+	hrtimer_init(&hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hrtimer.function = sh_dac_audio_timer;
 
 	return 0;
 }
 
 static void __exit dac_audio_exit(void)
 {
-	free_irq(TIMER1_IRQ, 0);
-
 	unregister_sound_dsp(device_major);
 	kfree((void *)data_buffer);
 }
diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c
index 6055fd6d3b3..e924492df21 100644
--- a/sound/parisc/harmony.c
+++ b/sound/parisc/harmony.c
@@ -935,7 +935,7 @@ snd_harmony_create(struct snd_card *card,
 	h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE);
 	if (h->iobase == NULL) {
 		printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n",
-		       padev->hpa.start);
+		       (unsigned long)padev->hpa.start);
 		err = -EBUSY;
 		goto free_and_ret;
 	}
@@ -1020,7 +1020,7 @@ static struct parisc_driver snd_harmony_driver = {
 	.name = "harmony",
 	.id_table = snd_harmony_devtable,
 	.probe = snd_harmony_probe,
-	.remove = snd_harmony_remove,
+	.remove = __devexit_p(snd_harmony_remove),
 };
 
 static int __init 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 93422e3a3f0..748f6b7d90b 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -275,6 +275,16 @@ config SND_CS5535AUDIO
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-cs5535audio.
 
+config SND_CTXFI
+	tristate "Creative Sound Blaster X-Fi"
+	select SND_PCM
+	help
+	  If you want to use soundcards based on Creative Sound Blastr X-Fi
+	  boards with 20k1 or 20k2 chips, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-ctxfi.
+
 config SND_DARLA20
 	tristate "(Echoaudio) Darla20"
 	select FW_LOADER
@@ -532,6 +542,9 @@ config SND_HDSP
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-hdsp.
 
+comment "Don't forget to add built-in firmwares for HDSP driver"
+	depends on SND_HDSP=y
+
 config SND_HDSPM
 	tristate "RME Hammerfall DSP MADI"
 	select SND_HWDEP
@@ -622,6 +635,16 @@ config SND_KORG1212
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-korg1212.
 
+config SND_LX6464ES
+	tristate "Digigram LX6464ES"
+	select SND_PCM
+	help
+	  Say Y here to include support for Digigram LX6464ES boards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-lx6464es.
+
+
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
 	select SND_AC97_CODEC
@@ -764,8 +787,8 @@ config SND_VIRTUOSO
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, and
-	  Essence STX.
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X,
+	  Essence ST (Deluxe), and Essence STX.
 	  Support for the HDAV1.3 (Deluxe) is very experimental.
 
 	  To compile this driver as a module, choose M here: the module
diff --git a/sound/pci/Makefile b/sound/pci/Makefile
index 65b25d221cd..ecfc609d2b9 100644
--- a/sound/pci/Makefile
+++ b/sound/pci/Makefile
@@ -59,9 +59,11 @@ obj-$(CONFIG_SND) += \
 	ali5451/ \
 	au88x0/ \
 	aw2/ \
+	ctxfi/ \
 	ca0106/ \
 	cs46xx/ \
 	cs5535audio/ \
+	lx6464es/ \
 	echoaudio/ \
 	emu10k1/ \
 	hda/ \
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 81bc93e5f1e..7337abdbe4e 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -958,10 +958,13 @@ static int patch_sigmatel_stac9708_3d(struct snd_ac97 * ac97)
 }
 
 static const struct snd_kcontrol_new snd_ac97_sigmatel_4speaker =
-AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", AC97_SIGMATEL_DAC2INVERT, 2, 1, 0);
+AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch",
+		AC97_SIGMATEL_DAC2INVERT, 2, 1, 0);
 
+/* "Sigmatel " removed due to excessive name length: */
 static const struct snd_kcontrol_new snd_ac97_sigmatel_phaseinvert =
-AC97_SINGLE("Sigmatel Surround Phase Inversion Playback Switch", AC97_SIGMATEL_DAC2INVERT, 3, 1, 0);
+AC97_SINGLE("Surround Phase Inversion Playback Switch",
+		AC97_SIGMATEL_DAC2INVERT, 3, 1, 0);
 
 static const struct snd_kcontrol_new snd_ac97_sigmatel_controls[] = {
 AC97_SINGLE("Sigmatel DAC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 1, 1, 0),
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 3906f5afe27..23f49f356e0 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1255,8 +1255,8 @@ static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
 	int temp;
 
 	temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
-	temp = (dma->period_virt * dma->period_bytes) + (temp & POS_MASK);
-	return (temp);
+	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
+	return temp;
 }
 
 static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
@@ -1504,8 +1504,7 @@ static int inline vortex_wtdma_getlinearpos(vortex_t * vortex, int wtdma)
 	int temp;
 
 	temp = hwread(vortex->mmio, VORTEX_WTDMA_STAT + (wtdma << 2));
-	//temp = (temp & POS_MASK) + (((temp>>WT_SUBBUF_SHIFT) & WT_SUBBUF_MASK)*(dma->cfg0&POS_MASK));
-	temp = (temp & POS_MASK) + ((dma->period_virt) * (dma->period_bytes));
+	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
 	return temp;
 }
 
@@ -2441,7 +2440,8 @@ static irqreturn_t vortex_interrupt(int irq, void *dev_id)
 		spin_lock(&vortex->lock);
 		for (i = 0; i < NR_ADB; i++) {
 			if (vortex->dma_adb[i].fifo_status == FIFO_START) {
-				if (vortex_adbdma_bufshift(vortex, i)) ;
+				if (!vortex_adbdma_bufshift(vortex, i))
+					continue;
 				spin_unlock(&vortex->lock);
 				snd_pcm_period_elapsed(vortex->dma_adb[i].
 						       substream);
diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c
index 6a3891ab69d..296123ab74f 100644
--- a/sound/pci/aw2/aw2-saa7146.c
+++ b/sound/pci/aw2/aw2-saa7146.c
@@ -108,7 +108,7 @@ void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
 #endif
 	/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
 
-	/* At initialization WS1 and WS2 are disbaled (configured as input */
+	/* At initialization WS1 and WS2 are disabled (configured as input) */
 	acon1 |= 0 * WS1_CTRL;
 	acon1 |= 0 * WS2_CTRL;
 
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index ce3f2e90f4d..24585c6c6d0 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -810,6 +810,8 @@ static struct pci_device_id snd_bt87x_ids[] = {
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
 	/* Voodoo TV 200 */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
+	/* Askey Computer Corp. MagicTView'99 */
+	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x144f, 0x3000, GENERIC),
 	/* AVerMedia Studio No. 103, 203, ...? */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1461, 0x0003, AVPHONE98),
 	/* Prolink PixelView PV-M4900 */
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index bfac30f7929..57b992a5c05 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1319,7 +1319,6 @@ static int __devinit snd_ca0106_pcm(struct snd_ca0106 *emu, int device)
         }
 
 	pcm->info_flags = 0;
-	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
 	strcpy(pcm->name, "CA0106");
 
 	for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; 
diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c
index ad2888705d2..c8c6f437f5b 100644
--- a/sound/pci/ca0106/ca0106_mixer.c
+++ b/sound/pci/ca0106/ca0106_mixer.c
@@ -739,7 +739,7 @@ static int __devinit rename_ctl(struct snd_card *card, const char *src, const ch
 	} while (0)
 
 static __devinitdata
-DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 50, 1);
+DECLARE_TLV_DB_SCALE(snd_ca0106_master_db_scale, -6375, 25, 1);
 
 static char *slave_vols[] __devinitdata = {
 	"Analog Front Playback Volume",
@@ -800,7 +800,7 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu)
 		"Capture Volume",
 		"External Amplifier",
 		"Sigmatel 4-Speaker Stereo Playback Switch",
-		"Sigmatel Surround Phase Inversion Playback ",
+		"Surround Phase Inversion Playback Switch",
 		NULL
 	};
 	static char *ca0106_rename_ctls[] = {
@@ -841,6 +841,9 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu)
 					      snd_ca0106_master_db_scale);
 	if (!vmaster)
 		return -ENOMEM;
+	err = snd_ctl_add(card, vmaster);
+	if (err < 0)
+		return err;
 	add_slaves(card, vmaster, slave_vols);
 
 	if (emu->details->spi_dac == 1) {
@@ -848,8 +851,13 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu)
 						      NULL);
 		if (!vmaster)
 			return -ENOMEM;
+		err = snd_ctl_add(card, vmaster);
+		if (err < 0)
+			return err;
 		add_slaves(card, vmaster, slave_sws);
 	}
+
+	strcpy(card->mixername, "CA0106");
         return 0;
 }
 
diff --git a/sound/pci/ctxfi/Makefile b/sound/pci/ctxfi/Makefile
new file mode 100644
index 00000000000..15075f89e98
--- /dev/null
+++ b/sound/pci/ctxfi/Makefile
@@ -0,0 +1,5 @@
+snd-ctxfi-objs := xfi.o ctatc.o ctvmem.o ctpcm.o ctmixer.o ctresource.o \
+	ctsrc.o ctamixer.o ctdaio.o ctimap.o cthardware.o cttimer.o \
+	cthw20k2.o cthw20k1.o
+
+obj-$(CONFIG_SND_CTXFI) += snd-ctxfi.o
diff --git a/sound/pci/ctxfi/ct20k1reg.h b/sound/pci/ctxfi/ct20k1reg.h
new file mode 100644
index 00000000000..f2e34e3f27e
--- /dev/null
+++ b/sound/pci/ctxfi/ct20k1reg.h
@@ -0,0 +1,636 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#ifndef CT20K1REG_H
+#define CT20k1REG_H
+
+/* 20k1 registers */
+#define 	DSPXRAM_START 			0x000000
+#define 	DSPXRAM_END 			0x013FFC
+#define 	DSPAXRAM_START 			0x020000
+#define 	DSPAXRAM_END 			0x023FFC
+#define 	DSPYRAM_START 			0x040000
+#define 	DSPYRAM_END 			0x04FFFC
+#define 	DSPAYRAM_START 			0x020000
+#define 	DSPAYRAM_END 			0x063FFC
+#define 	DSPMICRO_START 			0x080000
+#define 	DSPMICRO_END 			0x0B3FFC
+#define 	DSP0IO_START 			0x100000
+#define 	DSP0IO_END	 		0x101FFC
+#define 	AUDIORINGIPDSP0_START 		0x100000
+#define 	AUDIORINGIPDSP0_END 		0x1003FC
+#define 	AUDIORINGOPDSP0_START 		0x100400
+#define 	AUDIORINGOPDSP0_END 		0x1007FC
+#define 	AUDPARARINGIODSP0_START 	0x100800
+#define 	AUDPARARINGIODSP0_END	 	0x100BFC
+#define 	DSP0LOCALHWREG_START 		0x100C00
+#define 	DSP0LOCALHWREG_END	 	0x100C3C
+#define 	DSP0XYRAMAGINDEX_START 		0x100C40
+#define 	DSP0XYRAMAGINDEX_END	 	0x100C5C
+#define 	DSP0XYRAMAGMDFR_START 		0x100C60
+#define 	DSP0XYRAMAGMDFR_END	 	0x100C7C
+#define 	DSP0INTCONTLVEC_START 		0x100C80
+#define 	DSP0INTCONTLVEC_END	 	0x100CD8
+#define 	INTCONTLGLOBALREG_START 	0x100D1C
+#define 	INTCONTLGLOBALREG_END	 	0x100D3C
+#define		HOSTINTFPORTADDRCONTDSP0	0x100D40
+#define		HOSTINTFPORTDATADSP0		0x100D44
+#define		TIME0PERENBDSP0			0x100D60
+#define		TIME0COUNTERDSP0		0x100D64
+#define		TIME1PERENBDSP0			0x100D68
+#define		TIME1COUNTERDSP0		0x100D6C
+#define		TIME2PERENBDSP0			0x100D70
+#define		TIME2COUNTERDSP0		0x100D74
+#define		TIME3PERENBDSP0			0x100D78
+#define		TIME3COUNTERDSP0		0x100D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP0 	0x100D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP0	0x100D9C
+#define 	XRAMINDOPERREFUP_STARTDSP0	0x100DA0
+#define 	XRAMINDOPERREFUP_ENDDSP0	0x100DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP0 	0x100DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP0 	0x100DDC
+#define 	YRAMINDOPERREFUP_STARTDSP0	0x100DE0
+#define 	YRAMINDOPERREFUP_ENDDSP0 	0x100DFC
+#define 	DSP0CONDCODE 			0x100E00
+#define 	DSP0STACKFLAG 			0x100E04
+#define 	DSP0PROGCOUNTSTACKPTREG 	0x100E08
+#define 	DSP0PROGCOUNTSTACKDATAREG 	0x100E0C
+#define 	DSP0CURLOOPADDRREG 		0x100E10
+#define 	DSP0CURLOOPCOUNT 		0x100E14
+#define 	DSP0TOPLOOPCOUNTSTACK 		0x100E18
+#define 	DSP0TOPLOOPADDRSTACK 		0x100E1C
+#define 	DSP0LOOPSTACKPTR 		0x100E20
+#define 	DSP0STASSTACKDATAREG 		0x100E24
+#define 	DSP0STASSTACKPTR 		0x100E28
+#define 	DSP0PROGCOUNT 			0x100E2C
+#define  	GLOBDSPDEBGREG			0x100E30
+#define  	GLOBDSPBREPTRREG		0x100E30
+#define 	DSP0XYRAMBASE_START 		0x100EA0
+#define 	DSP0XYRAMBASE_END 		0x100EBC
+#define 	DSP0XYRAMLENG_START 		0x100EC0
+#define 	DSP0XYRAMLENG_END 		0x100EDC
+#define		SEMAPHOREREGDSP0		0x100EE0
+#define		DSP0INTCONTMASKREG		0x100EE4
+#define		DSP0INTCONTPENDREG		0x100EE8
+#define		DSP0INTCONTSERVINT		0x100EEC
+#define		DSPINTCONTEXTINTMODREG		0x100EEC
+#define		GPIODSP0			0x100EFC
+#define 	DMADSPBASEADDRREG_STARTDSP0	0x100F00
+#define 	DMADSPBASEADDRREG_ENDDSP0	0x100F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP0	0x100F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP0	0x100F3C
+#define 	DMADSPCURADDRREG_STARTDSP0	0x100F40
+#define 	DMADSPCURADDRREG_ENDDSP0	0x100F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP0	0x100F60
+#define 	DMAHOSTCURADDRREG_ENDDSP0	0x100F7C
+#define 	DMATANXCOUNTREG_STARTDSP0	0x100F80
+#define 	DMATANXCOUNTREG_ENDDSP0		0x100F9C
+#define 	DMATIMEBUGREG_STARTDSP0		0x100FA0
+#define 	DMATIMEBUGREG_ENDDSP0		0x100FAC
+#define 	DMACNTLMODFREG_STARTDSP0	0x100FA0
+#define 	DMACNTLMODFREG_ENDDSP0		0x100FAC
+
+#define 	DMAGLOBSTATSREGDSP0		0x100FEC
+#define 	DSP0XGPRAM_START 		0x101000
+#define 	DSP0XGPRAM_END 			0x1017FC
+#define 	DSP0YGPRAM_START 		0x101800
+#define 	DSP0YGPRAM_END 			0x101FFC
+
+
+
+
+#define 	AUDIORINGIPDSP1_START 		0x102000
+#define 	AUDIORINGIPDSP1_END	 	0x1023FC
+#define 	AUDIORINGOPDSP1_START 		0x102400
+#define 	AUDIORINGOPDSP1_END	 	0x1027FC
+#define 	AUDPARARINGIODSP1_START 	0x102800
+#define 	AUDPARARINGIODSP1_END	 	0x102BFC
+#define 	DSP1LOCALHWREG_START 		0x102C00
+#define 	DSP1LOCALHWREG_END	 	0x102C3C
+#define 	DSP1XYRAMAGINDEX_START 		0x102C40
+#define 	DSP1XYRAMAGINDEX_END	 	0x102C5C
+#define 	DSP1XYRAMAGMDFR_START 		0x102C60
+#define 	DSP1XYRAMAGMDFR_END	 	0x102C7C
+#define 	DSP1INTCONTLVEC_START 		0x102C80
+#define 	DSP1INTCONTLVEC_END	 	0x102CD8
+#define		HOSTINTFPORTADDRCONTDSP1	0x102D40
+#define		HOSTINTFPORTDATADSP1		0x102D44
+#define		TIME0PERENBDSP1			0x102D60
+#define		TIME0COUNTERDSP1		0x102D64
+#define		TIME1PERENBDSP1			0x102D68
+#define		TIME1COUNTERDSP1		0x102D6C
+#define		TIME2PERENBDSP1			0x102D70
+#define		TIME2COUNTERDSP1		0x102D74
+#define		TIME3PERENBDSP1			0x102D78
+#define		TIME3COUNTERDSP1		0x102D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP1 	0x102D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP1	0x102D9C
+#define 	XRAMINDOPERREFUP_STARTDSP1	0x102DA0
+#define 	XRAMINDOPERREFUP_ENDDSP1	0x102DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP1 	0x102DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP1	0x102DDC
+#define 	YRAMINDOPERREFUP_STARTDSP1	0x102DE0
+#define 	YRAMINDOPERREFUP_ENDDSP1	0x102DFC
+
+#define 	DSP1CONDCODE 			0x102E00
+#define 	DSP1STACKFLAG 			0x102E04
+#define 	DSP1PROGCOUNTSTACKPTREG 	0x102E08
+#define 	DSP1PROGCOUNTSTACKDATAREG 	0x102E0C
+#define 	DSP1CURLOOPADDRREG 		0x102E10
+#define 	DSP1CURLOOPCOUNT 		0x102E14
+#define 	DSP1TOPLOOPCOUNTSTACK 		0x102E18
+#define 	DSP1TOPLOOPADDRSTACK 		0x102E1C
+#define 	DSP1LOOPSTACKPTR 		0x102E20
+#define 	DSP1STASSTACKDATAREG 		0x102E24
+#define 	DSP1STASSTACKPTR 		0x102E28
+#define 	DSP1PROGCOUNT 			0x102E2C
+#define 	DSP1XYRAMBASE_START 		0x102EA0
+#define 	DSP1XYRAMBASE_END 		0x102EBC
+#define 	DSP1XYRAMLENG_START 		0x102EC0
+#define 	DSP1XYRAMLENG_END 		0x102EDC
+#define		SEMAPHOREREGDSP1		0x102EE0
+#define		DSP1INTCONTMASKREG		0x102EE4
+#define		DSP1INTCONTPENDREG		0x102EE8
+#define		DSP1INTCONTSERVINT		0x102EEC
+#define		GPIODSP1			0x102EFC
+#define 	DMADSPBASEADDRREG_STARTDSP1	0x102F00
+#define 	DMADSPBASEADDRREG_ENDDSP1	0x102F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP1	0x102F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP1	0x102F3C
+#define 	DMADSPCURADDRREG_STARTDSP1	0x102F40
+#define 	DMADSPCURADDRREG_ENDDSP1	0x102F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP1	0x102F60
+#define 	DMAHOSTCURADDRREG_ENDDSP1	0x102F7C
+#define 	DMATANXCOUNTREG_STARTDSP1	0x102F80
+#define 	DMATANXCOUNTREG_ENDDSP1		0x102F9C
+#define 	DMATIMEBUGREG_STARTDSP1		0x102FA0
+#define 	DMATIMEBUGREG_ENDDSP1		0x102FAC
+#define 	DMACNTLMODFREG_STARTDSP1	0x102FA0
+#define 	DMACNTLMODFREG_ENDDSP1		0x102FAC
+
+#define 	DMAGLOBSTATSREGDSP1		0x102FEC
+#define 	DSP1XGPRAM_START 		0x103000
+#define 	DSP1XGPRAM_END 			0x1033FC
+#define 	DSP1YGPRAM_START 		0x103400
+#define 	DSP1YGPRAM_END 			0x1037FC
+
+
+
+#define 	AUDIORINGIPDSP2_START 		0x104000
+#define 	AUDIORINGIPDSP2_END	 	0x1043FC
+#define 	AUDIORINGOPDSP2_START 		0x104400
+#define 	AUDIORINGOPDSP2_END	 	0x1047FC
+#define 	AUDPARARINGIODSP2_START 	0x104800
+#define 	AUDPARARINGIODSP2_END	 	0x104BFC
+#define 	DSP2LOCALHWREG_START 		0x104C00
+#define 	DSP2LOCALHWREG_END	 	0x104C3C
+#define 	DSP2XYRAMAGINDEX_START 		0x104C40
+#define 	DSP2XYRAMAGINDEX_END	 	0x104C5C
+#define 	DSP2XYRAMAGMDFR_START 		0x104C60
+#define 	DSP2XYRAMAGMDFR_END		0x104C7C
+#define 	DSP2INTCONTLVEC_START 		0x104C80
+#define 	DSP2INTCONTLVEC_END	 	0x104CD8
+#define		HOSTINTFPORTADDRCONTDSP2	0x104D40
+#define		HOSTINTFPORTDATADSP2		0x104D44
+#define		TIME0PERENBDSP2			0x104D60
+#define		TIME0COUNTERDSP2		0x104D64
+#define		TIME1PERENBDSP2			0x104D68
+#define		TIME1COUNTERDSP2		0x104D6C
+#define		TIME2PERENBDSP2			0x104D70
+#define		TIME2COUNTERDSP2		0x104D74
+#define		TIME3PERENBDSP2			0x104D78
+#define		TIME3COUNTERDSP2		0x104D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP2 	0x104D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP2	0x104D9C
+#define 	XRAMINDOPERREFUP_STARTDSP2	0x104DA0
+#define 	XRAMINDOPERREFUP_ENDDSP2	0x104DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP2 	0x104DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP2	0x104DDC
+#define 	YRAMINDOPERREFUP_STARTDSP2	0x104DE0
+#define 	YRAMINDOPERREFUP_ENDDSP2 	0x104DFC
+#define 	DSP2CONDCODE 			0x104E00
+#define 	DSP2STACKFLAG 			0x104E04
+#define 	DSP2PROGCOUNTSTACKPTREG 	0x104E08
+#define 	DSP2PROGCOUNTSTACKDATAREG 	0x104E0C
+#define 	DSP2CURLOOPADDRREG 		0x104E10
+#define 	DSP2CURLOOPCOUNT 		0x104E14
+#define 	DSP2TOPLOOPCOUNTSTACK 		0x104E18
+#define 	DSP2TOPLOOPADDRSTACK 		0x104E1C
+#define 	DSP2LOOPSTACKPTR 		0x104E20
+#define 	DSP2STASSTACKDATAREG 		0x104E24
+#define 	DSP2STASSTACKPTR 		0x104E28
+#define 	DSP2PROGCOUNT 			0x104E2C
+#define 	DSP2XYRAMBASE_START 		0x104EA0
+#define 	DSP2XYRAMBASE_END 		0x104EBC
+#define 	DSP2XYRAMLENG_START 		0x104EC0
+#define 	DSP2XYRAMLENG_END 		0x104EDC
+#define		SEMAPHOREREGDSP2		0x104EE0
+#define		DSP2INTCONTMASKREG		0x104EE4
+#define		DSP2INTCONTPENDREG		0x104EE8
+#define		DSP2INTCONTSERVINT		0x104EEC
+#define		GPIODSP2			0x104EFC
+#define 	DMADSPBASEADDRREG_STARTDSP2	0x104F00
+#define 	DMADSPBASEADDRREG_ENDDSP2	0x104F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP2	0x104F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP2	0x104F3C
+#define 	DMADSPCURADDRREG_STARTDSP2	0x104F40
+#define 	DMADSPCURADDRREG_ENDDSP2	0x104F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP2	0x104F60
+#define 	DMAHOSTCURADDRREG_ENDDSP2	0x104F7C
+#define 	DMATANXCOUNTREG_STARTDSP2	0x104F80
+#define 	DMATANXCOUNTREG_ENDDSP2		0x104F9C
+#define 	DMATIMEBUGREG_STARTDSP2		0x104FA0
+#define 	DMATIMEBUGREG_ENDDSP2		0x104FAC
+#define 	DMACNTLMODFREG_STARTDSP2	0x104FA0
+#define 	DMACNTLMODFREG_ENDDSP2		0x104FAC
+
+#define 	DMAGLOBSTATSREGDSP2		0x104FEC
+#define 	DSP2XGPRAM_START 		0x105000
+#define 	DSP2XGPRAM_END 			0x1051FC
+#define 	DSP2YGPRAM_START 		0x105800
+#define 	DSP2YGPRAM_END 			0x1059FC
+
+
+
+#define 	AUDIORINGIPDSP3_START 		0x106000
+#define 	AUDIORINGIPDSP3_END	 	0x1063FC
+#define 	AUDIORINGOPDSP3_START 		0x106400
+#define 	AUDIORINGOPDSP3_END	 	0x1067FC
+#define 	AUDPARARINGIODSP3_START 	0x106800
+#define 	AUDPARARINGIODSP3_END	 	0x106BFC
+#define 	DSP3LOCALHWREG_START 		0x106C00
+#define 	DSP3LOCALHWREG_END	 	0x106C3C
+#define 	DSP3XYRAMAGINDEX_START 		0x106C40
+#define 	DSP3XYRAMAGINDEX_END	 	0x106C5C
+#define 	DSP3XYRAMAGMDFR_START 		0x106C60
+#define 	DSP3XYRAMAGMDFR_END		0x106C7C
+#define 	DSP3INTCONTLVEC_START 		0x106C80
+#define 	DSP3INTCONTLVEC_END	 	0x106CD8
+#define		HOSTINTFPORTADDRCONTDSP3	0x106D40
+#define		HOSTINTFPORTDATADSP3		0x106D44
+#define		TIME0PERENBDSP3			0x106D60
+#define		TIME0COUNTERDSP3		0x106D64
+#define		TIME1PERENBDSP3			0x106D68
+#define		TIME1COUNTERDSP3		0x106D6C
+#define		TIME2PERENBDSP3			0x106D70
+#define		TIME2COUNTERDSP3		0x106D74
+#define		TIME3PERENBDSP3			0x106D78
+#define		TIME3COUNTERDSP3		0x106D7C
+#define 	XRAMINDOPERREFNOUP_STARTDSP3 	0x106D80
+#define 	XRAMINDOPERREFNOUP_ENDDSP3	0x106D9C
+#define 	XRAMINDOPERREFUP_STARTDSP3	0x106DA0
+#define 	XRAMINDOPERREFUP_ENDDSP3	0x106DBC
+#define 	YRAMINDOPERREFNOUP_STARTDSP3 	0x106DC0
+#define 	YRAMINDOPERREFNOUP_ENDDSP3	0x106DDC
+#define 	YRAMINDOPERREFUP_STARTDSP3	0x106DE0
+#define 	YRAMINDOPERREFUP_ENDDSP3	0x100DFC
+
+#define 	DSP3CONDCODE 			0x106E00
+#define 	DSP3STACKFLAG 			0x106E04
+#define 	DSP3PROGCOUNTSTACKPTREG 	0x106E08
+#define 	DSP3PROGCOUNTSTACKDATAREG 	0x106E0C
+#define 	DSP3CURLOOPADDRREG 		0x106E10
+#define 	DSP3CURLOOPCOUNT 		0x106E14
+#define 	DSP3TOPLOOPCOUNTSTACK 		0x106E18
+#define 	DSP3TOPLOOPADDRSTACK 		0x106E1C
+#define 	DSP3LOOPSTACKPTR 		0x106E20
+#define 	DSP3STASSTACKDATAREG 		0x106E24
+#define 	DSP3STASSTACKPTR 		0x106E28
+#define 	DSP3PROGCOUNT 			0x106E2C
+#define 	DSP3XYRAMBASE_START 		0x106EA0
+#define 	DSP3XYRAMBASE_END 		0x106EBC
+#define 	DSP3XYRAMLENG_START 		0x106EC0
+#define 	DSP3XYRAMLENG_END 		0x106EDC
+#define		SEMAPHOREREGDSP3		0x106EE0
+#define		DSP3INTCONTMASKREG		0x106EE4
+#define		DSP3INTCONTPENDREG		0x106EE8
+#define		DSP3INTCONTSERVINT		0x106EEC
+#define		GPIODSP3			0x106EFC
+#define 	DMADSPBASEADDRREG_STARTDSP3	0x106F00
+#define 	DMADSPBASEADDRREG_ENDDSP3	0x106F1C
+#define 	DMAHOSTBASEADDRREG_STARTDSP3	0x106F20
+#define 	DMAHOSTBASEADDRREG_ENDDSP3	0x106F3C
+#define 	DMADSPCURADDRREG_STARTDSP3	0x106F40
+#define 	DMADSPCURADDRREG_ENDDSP3	0x106F5C
+#define 	DMAHOSTCURADDRREG_STARTDSP3	0x106F60
+#define 	DMAHOSTCURADDRREG_ENDDSP3	0x106F7C
+#define 	DMATANXCOUNTREG_STARTDSP3	0x106F80
+#define 	DMATANXCOUNTREG_ENDDSP3		0x106F9C
+#define 	DMATIMEBUGREG_STARTDSP3		0x106FA0
+#define 	DMATIMEBUGREG_ENDDSP3		0x106FAC
+#define 	DMACNTLMODFREG_STARTDSP3	0x106FA0
+#define 	DMACNTLMODFREG_ENDDSP3		0x106FAC
+
+#define 	DMAGLOBSTATSREGDSP3		0x106FEC
+#define 	DSP3XGPRAM_START 		0x107000
+#define 	DSP3XGPRAM_END 			0x1071FC
+#define 	DSP3YGPRAM_START 		0x107800
+#define 	DSP3YGPRAM_END 			0x1079FC
+
+/* end of DSP reg definitions */
+
+#define  	DSPAIMAP_START			0x108000
+#define  	DSPAIMAP_END			0x1083FC
+#define  	DSPPIMAP_START			0x108400
+#define  	DSPPIMAP_END			0x1087FC
+#define  	DSPPOMAP_START			0x108800
+#define  	DSPPOMAP_END			0x108BFC
+#define  	DSPPOCTL			0x108C00
+#define 	TKCTL_START			0x110000
+#define 	TKCTL_END			0x110FFC
+#define 	TKCC_START			0x111000
+#define 	TKCC_END			0x111FFC
+#define 	TKIMAP_START			0x112000
+#define 	TKIMAP_END			0x112FFC
+#define		TKDCTR16			0x113000
+#define		TKPB16				0x113004
+#define		TKBS16				0x113008
+#define		TKDCTR32			0x11300C
+#define		TKPB32				0x113010
+#define		TKBS32				0x113014
+#define		ICDCTR16			0x113018
+#define		ITBS16				0x11301C
+#define		ICDCTR32			0x113020
+#define		ITBS32				0x113024
+#define		ITSTART				0x113028
+#define		TKSQ				0x11302C
+
+#define		TKSCCTL_START			0x114000
+#define		TKSCCTL_END			0x11403C
+#define		TKSCADR_START			0x114100
+#define		TKSCADR_END			0x11413C
+#define		TKSCDATAX_START			0x114800
+#define		TKSCDATAX_END			0x1149FC
+#define		TKPCDATAX_START			0x120000
+#define		TKPCDATAX_END			0x12FFFC
+
+#define		MALSA				0x130000
+#define		MAPPHA				0x130004
+#define		MAPPLA				0x130008
+#define		MALSB				0x130010
+#define		MAPPHB				0x130014
+#define		MAPPLB				0x130018
+
+#define 	TANSPORTMAPABREGS_START		0x130020
+#define 	TANSPORTMAPABREGS_END		0x13A2FC
+
+#define		PTPAHX				0x13B000
+#define		PTPALX				0x13B004
+
+#define		TANSPPAGETABLEPHYADDR015_START	0x13B008
+#define		TANSPPAGETABLEPHYADDR015_END	0x13B07C
+#define		TRNQADRX_START			0x13B100
+#define		TRNQADRX_END			0x13B13C
+#define		TRNQTIMX_START			0x13B200
+#define		TRNQTIMX_END			0x13B23C
+#define		TRNQAPARMX_START		0x13B300
+#define		TRNQAPARMX_END			0x13B33C
+
+#define		TRNQCNT				0x13B400
+#define		TRNCTL				0x13B404
+#define		TRNIS				0x13B408
+#define		TRNCURTS			0x13B40C
+
+#define		AMOP_START			0x140000
+#define		AMOPLO				0x140000
+#define		AMOPHI				0x140004
+#define		AMOP_END			0x147FFC
+#define		PMOP_START			0x148000
+#define		PMOPLO				0x148000
+#define		PMOPHI				0x148004
+#define		PMOP_END			0x14FFFC
+#define		PCURR_START			0x150000
+#define		PCURR_END			0x153FFC
+#define		PTRAG_START			0x154000
+#define		PTRAG_END			0x157FFC
+#define		PSR_START			0x158000
+#define		PSR_END				0x15BFFC
+
+#define		PFSTAT4SEG_START		0x160000
+#define		PFSTAT4SEG_END			0x160BFC
+#define		PFSTAT2SEG_START		0x160C00
+#define		PFSTAT2SEG_END			0x1617FC
+#define		PFTARG4SEG_START		0x164000
+#define		PFTARG4SEG_END			0x164BFC
+#define		PFTARG2SEG_START		0x164C00
+#define		PFTARG2SEG_END			0x1657FC
+#define		PFSR4SEG_START			0x168000
+#define		PFSR4SEG_END			0x168BFC
+#define		PFSR2SEG_START			0x168C00
+#define		PFSR2SEG_END			0x1697FC
+#define		PCURRMS4SEG_START		0x16C000
+#define		PCURRMS4SEG_END			0x16CCFC
+#define		PCURRMS2SEG_START		0x16CC00
+#define		PCURRMS2SEG_END			0x16D7FC
+#define		PTARGMS4SEG_START		0x170000
+#define		PTARGMS4SEG_END			0x172FFC
+#define		PTARGMS2SEG_START		0x173000
+#define		PTARGMS2SEG_END			0x1747FC
+#define		PSRMS4SEG_START			0x170000
+#define		PSRMS4SEG_END			0x172FFC
+#define		PSRMS2SEG_START			0x173000
+#define		PSRMS2SEG_END			0x1747FC
+
+#define		PRING_LO_START			0x190000
+#define		PRING_LO_END			0x193FFC
+#define		PRING_HI_START			0x194000
+#define		PRING_HI_END			0x197FFC
+#define		PRING_LO_HI_START		0x198000
+#define		PRING_LO_HI			0x198000
+#define		PRING_LO_HI_END			0x19BFFC
+
+#define		PINTFIFO			0x1A0000
+#define		SRCCTL				0x1B0000
+#define		SRCCCR				0x1B0004
+#define		SRCIMAP				0x1B0008
+#define		SRCODDC				0x1B000C
+#define		SRCCA				0x1B0010
+#define		SRCCF				0x1B0014
+#define		SRCSA				0x1B0018
+#define		SRCLA				0x1B001C
+#define		SRCCTLSWR			0x1B0020
+
+/* SRC HERE */
+#define		SRCALBA				0x1B002C
+#define		SRCMCTL				0x1B012C
+#define		SRCCERR				0x1B022C
+#define		SRCITB				0x1B032C
+#define		SRCIPM				0x1B082C
+#define		SRCIP				0x1B102C
+#define		SRCENBSTAT			0x1B202C
+#define		SRCENBLO			0x1B212C
+#define		SRCENBHI			0x1B222C
+#define		SRCENBS				0x1B232C
+#define		SRCENB				0x1B282C
+#define		SRCENB07			0x1B282C
+#define		SRCENBS07			0x1B302C
+
+#define		SRCDN0Z				0x1B0030
+#define		SRCDN0Z0			0x1B0030
+#define		SRCDN0Z1			0x1B0034
+#define		SRCDN0Z2			0x1B0038
+#define		SRCDN0Z3			0x1B003C
+#define		SRCDN1Z				0x1B0040
+#define		SRCDN1Z0			0x1B0040
+#define		SRCDN1Z1			0x1B0044
+#define		SRCDN1Z2			0x1B0048
+#define		SRCDN1Z3			0x1B004C
+#define		SRCDN1Z4			0x1B0050
+#define		SRCDN1Z5			0x1B0054
+#define		SRCDN1Z6			0x1B0058
+#define		SRCDN1Z7			0x1B005C
+#define		SRCUPZ				0x1B0060
+#define		SRCUPZ0				0x1B0060
+#define		SRCUPZ1				0x1B0064
+#define		SRCUPZ2				0x1B0068
+#define		SRCUPZ3				0x1B006C
+#define		SRCUPZ4				0x1B0070
+#define		SRCUPZ5				0x1B0074
+#define		SRCUPZ6				0x1B0078
+#define		SRCUPZ7				0x1B007C
+#define		SRCCD0				0x1B0080
+#define		SRCCD1				0x1B0084
+#define		SRCCD2				0x1B0088
+#define		SRCCD3				0x1B008C
+#define		SRCCD4				0x1B0090
+#define		SRCCD5				0x1B0094
+#define		SRCCD6				0x1B0098
+#define		SRCCD7				0x1B009C
+#define		SRCCD8				0x1B00A0
+#define		SRCCD9				0x1B00A4
+#define		SRCCDA				0x1B00A8
+#define		SRCCDB				0x1B00AC
+#define		SRCCDC				0x1B00B0
+#define		SRCCDD				0x1B00B4
+#define		SRCCDE				0x1B00B8
+#define		SRCCDF				0x1B00BC
+#define		SRCCD10				0x1B00C0
+#define		SRCCD11				0x1B00C4
+#define		SRCCD12				0x1B00C8
+#define		SRCCD13				0x1B00CC
+#define		SRCCD14				0x1B00D0
+#define		SRCCD15				0x1B00D4
+#define		SRCCD16				0x1B00D8
+#define		SRCCD17				0x1B00DC
+#define		SRCCD18				0x1B00E0
+#define		SRCCD19				0x1B00E4
+#define		SRCCD1A				0x1B00E8
+#define		SRCCD1B				0x1B00EC
+#define		SRCCD1C				0x1B00F0
+#define		SRCCD1D				0x1B00F4
+#define		SRCCD1E				0x1B00F8
+#define		SRCCD1F				0x1B00FC
+
+#define		SRCCONTRBLOCK_START		0x1B0100
+#define		SRCCONTRBLOCK_END		0x1BFFFC
+#define		FILTOP_START	0x1C0000
+#define		FILTOP_END	0x1C05FC
+#define		FILTIMAP_START	0x1C0800
+#define		FILTIMAP_END	0x1C0DFC
+#define		FILTZ1_START	0x1C1000
+#define		FILTZ1_END	0x1C15FC
+#define		FILTZ2_START	0x1C1800
+#define		FILTZ2_END	0x1C1DFC
+#define		DAOIMAP_START	0x1C5000
+#define		DAOIMAP		0x1C5000
+#define		DAOIMAP_END	0x1C5124
+
+#define		AC97D		0x1C5400
+#define		AC97A		0x1C5404
+#define		AC97CTL		0x1C5408
+#define		I2SCTL		0x1C5420
+
+#define		SPOS		0x1C5440
+#define		SPOSA		0x1C5440
+#define		SPOSB		0x1C5444
+#define		SPOSC		0x1C5448
+#define		SPOSD		0x1C544C
+
+#define		SPISA		0x1C5450
+#define		SPISB		0x1C5454
+#define		SPISC		0x1C5458
+#define		SPISD		0x1C545C
+
+#define		SPFSCTL		0x1C5460
+
+#define		SPFS0		0x1C5468
+#define		SPFS1		0x1C546C
+#define		SPFS2		0x1C5470
+#define		SPFS3		0x1C5474
+#define		SPFS4		0x1C5478
+#define		SPFS5		0x1C547C
+
+#define		SPOCTL		0x1C5480
+#define		SPICTL		0x1C5484
+#define		SPISTS		0x1C5488
+#define		SPINTP		0x1C548C
+#define		SPINTE		0x1C5490
+#define		SPUTCTLAB	0x1C5494
+#define		SPUTCTLCD	0x1C5498
+
+#define		SRTSPA		0x1C54C0
+#define		SRTSPB		0x1C54C4
+#define		SRTSPC		0x1C54C8
+#define		SRTSPD		0x1C54CC
+
+#define		SRTSCTL		0x1C54D0
+#define		SRTSCTLA	0x1C54D0
+#define		SRTSCTLB	0x1C54D4
+#define		SRTSCTLC	0x1C54D8
+#define		SRTSCTLD	0x1C54DC
+
+#define		SRTI2S		0x1C54E0
+#define		SRTICTL		0x1C54F0
+
+#define		WC		0x1C6000
+#define		TIMR		0x1C6004
+# define	TIMR_IE		(1<<15)
+# define	TIMR_IP		(1<<14)
+
+#define		GIP		0x1C6010
+#define		GIE		0x1C6014
+#define		DIE		0x1C6018
+#define		DIC		0x1C601C
+#define		GPIO		0x1C6020
+#define		GPIOCTL		0x1C6024
+#define		GPIP		0x1C6028
+#define		GPIE		0x1C602C
+#define		DSPINT0		0x1C6030
+#define		DSPEIOC		0x1C6034
+#define		MUADAT		0x1C6040
+#define		MUACMD		0x1C6044
+#define 	MUASTAT		0x1C6044
+#define		MUBDAT		0x1C6048
+#define		MUBCMD		0x1C604C
+#define		MUBSTAT		0x1C604C
+#define		UARTCMA		0x1C6050
+#define		UARTCMB		0x1C6054
+#define		UARTIP		0x1C6058
+#define		UARTIE		0x1C605C
+#define		PLLCTL		0x1C6060
+#define		PLLDCD		0x1C6064
+#define		GCTL		0x1C6070
+#define		ID0		0x1C6080
+#define		ID1		0x1C6084
+#define		ID2		0x1C6088
+#define		ID3		0x1C608C
+#define		SDRCTL		0x1C7000
+
+
+#define I2SA_L    0x0L
+#define I2SA_R    0x1L
+#define I2SB_L    0x8L
+#define I2SB_R    0x9L
+#define I2SC_L    0x10L
+#define I2SC_R    0x11L
+#define I2SD_L    0x18L
+#define I2SD_R    0x19L
+
+#endif /* CT20K1REG_H */
+
+
diff --git a/sound/pci/ctxfi/ct20k2reg.h b/sound/pci/ctxfi/ct20k2reg.h
new file mode 100644
index 00000000000..2d07986f57c
--- /dev/null
+++ b/sound/pci/ctxfi/ct20k2reg.h
@@ -0,0 +1,85 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#ifndef _20K2REGISTERS_H_
+#define _20K2REGISTERS_H_
+
+
+/* Timer Registers */
+#define TIMER_TIMR          0x1B7004
+#define INTERRUPT_GIP       0x1B7010
+#define INTERRUPT_GIE       0x1B7014
+
+/* I2C Registers */
+#define I2C_IF_ADDRESS   0x1B9000
+#define I2C_IF_WDATA     0x1B9004
+#define I2C_IF_RDATA     0x1B9008
+#define I2C_IF_STATUS    0x1B900C
+#define I2C_IF_WLOCK     0x1B9010
+
+/* Global Control Registers */
+#define GLOBAL_CNTL_GCTL    0x1B7090
+
+/* PLL Registers */
+#define PLL_CTL 		0x1B7080
+#define PLL_STAT		0x1B7084
+#define PLL_ENB			0x1B7088
+
+/* SRC Registers */
+#define SRC_CTL             0x1A0000 /* 0x1A0000 + (256 * Chn) */
+#define SRC_CCR             0x1A0004 /* 0x1A0004 + (256 * Chn) */
+#define SRC_IMAP            0x1A0008 /* 0x1A0008 + (256 * Chn) */
+#define SRC_CA              0x1A0010 /* 0x1A0010 + (256 * Chn) */
+#define SRC_CF              0x1A0014 /* 0x1A0014 + (256 * Chn) */
+#define SRC_SA              0x1A0018 /* 0x1A0018 + (256 * Chn) */
+#define SRC_LA              0x1A001C /* 0x1A001C + (256 * Chn) */
+#define SRC_CTLSWR	    0x1A0020 /* 0x1A0020 + (256 * Chn) */
+#define SRC_CD		    0x1A0080 /* 0x1A0080 + (256 * Chn) + (4 * Regn) */
+#define SRC_MCTL		0x1A012C
+#define SRC_IP			0x1A102C /* 0x1A102C + (256 * Regn) */
+#define SRC_ENB			0x1A282C /* 0x1A282C + (256 * Regn) */
+#define SRC_ENBSTAT		0x1A202C
+#define SRC_ENBSA		0x1A232C
+#define SRC_DN0Z		0x1A0030
+#define SRC_DN1Z		0x1A0040
+#define SRC_UPZ			0x1A0060
+
+/* GPIO Registers */
+#define GPIO_DATA           0x1B7020
+#define GPIO_CTRL           0x1B7024
+
+/* Virtual memory registers */
+#define VMEM_PTPAL          0x1C6300 /* 0x1C6300 + (16 * Chn) */
+#define VMEM_PTPAH          0x1C6304 /* 0x1C6304 + (16 * Chn) */
+#define VMEM_CTL            0x1C7000
+
+/* Transport Registers */
+#define TRANSPORT_ENB       0x1B6000
+#define TRANSPORT_CTL       0x1B6004
+#define TRANSPORT_INT       0x1B6008
+
+/* Audio IO */
+#define AUDIO_IO_AIM        0x1B5000 /* 0x1B5000 + (0x04 * Chn) */
+#define AUDIO_IO_TX_CTL     0x1B5400 /* 0x1B5400 + (0x40 * Chn) */
+#define AUDIO_IO_TX_CSTAT_L 0x1B5408 /* 0x1B5408 + (0x40 * Chn) */
+#define AUDIO_IO_TX_CSTAT_H 0x1B540C /* 0x1B540C + (0x40 * Chn) */
+#define AUDIO_IO_RX_CTL     0x1B5410 /* 0x1B5410 + (0x40 * Chn) */
+#define AUDIO_IO_RX_SRT_CTL 0x1B5420 /* 0x1B5420 + (0x40 * Chn) */
+#define AUDIO_IO_MCLK       0x1B5600
+#define AUDIO_IO_TX_BLRCLK  0x1B5604
+#define AUDIO_IO_RX_BLRCLK  0x1B5608
+
+/* Mixer */
+#define MIXER_AMOPLO		0x130000 /* 0x130000 + (8 * Chn) [4095 : 0] */
+#define MIXER_AMOPHI		0x130004 /* 0x130004 + (8 * Chn) [4095 : 0] */
+#define MIXER_PRING_LO_HI	0x188000 /* 0x188000 + (4 * Chn) [4095 : 0] */
+#define MIXER_PMOPLO		0x138000 /* 0x138000 + (8 * Chn) [4095 : 0] */
+#define MIXER_PMOPHI		0x138004 /* 0x138004 + (8 * Chn) [4095 : 0] */
+#define MIXER_AR_ENABLE		0x19000C
+
+#endif
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
new file mode 100644
index 00000000000..a1db51b3ead
--- /dev/null
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -0,0 +1,488 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctamixer.c
+ *
+ * @Brief
+ * This file contains the implementation of the Audio Mixer
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 21 2008
+ *
+ */
+
+#include "ctamixer.h"
+#include "cthardware.h"
+#include <linux/slab.h>
+
+#define AMIXER_RESOURCE_NUM	256
+#define SUM_RESOURCE_NUM	256
+
+#define AMIXER_Y_IMMEDIATE	1
+
+#define BLANK_SLOT		4094
+
+static int amixer_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0];
+}
+
+static int amixer_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
+}
+
+static int amixer_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct amixer, rsc)->idx[rsc->conj];
+}
+
+static int amixer_output_slot(const struct rsc *rsc)
+{
+	return (amixer_index(rsc) << 4) + 0x4;
+}
+
+static struct rsc_ops amixer_basic_rsc_ops = {
+	.master		= amixer_master,
+	.next_conj	= amixer_next_conj,
+	.index		= amixer_index,
+	.output_slot	= amixer_output_slot,
+};
+
+static int amixer_set_input(struct amixer *amixer, struct rsc *rsc)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_mode(amixer->rsc.ctrl_blk, AMIXER_Y_IMMEDIATE);
+	amixer->input = rsc;
+	if (NULL == rsc)
+		hw->amixer_set_x(amixer->rsc.ctrl_blk, BLANK_SLOT);
+	else
+		hw->amixer_set_x(amixer->rsc.ctrl_blk,
+					rsc->ops->output_slot(rsc));
+
+	return 0;
+}
+
+/* y is a 14-bit immediate constant */
+static int amixer_set_y(struct amixer *amixer, unsigned int y)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_y(amixer->rsc.ctrl_blk, y);
+
+	return 0;
+}
+
+static int amixer_set_invalid_squash(struct amixer *amixer, unsigned int iv)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	hw->amixer_set_iv(amixer->rsc.ctrl_blk, iv);
+
+	return 0;
+}
+
+static int amixer_set_sum(struct amixer *amixer, struct sum *sum)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	amixer->sum = sum;
+	if (NULL == sum) {
+		hw->amixer_set_se(amixer->rsc.ctrl_blk, 0);
+	} else {
+		hw->amixer_set_se(amixer->rsc.ctrl_blk, 1);
+		hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
+					sum->rsc.ops->index(&sum->rsc));
+	}
+
+	return 0;
+}
+
+static int amixer_commit_write(struct amixer *amixer)
+{
+	struct hw *hw;
+	unsigned int index;
+	int i;
+	struct rsc *input;
+	struct sum *sum;
+
+	hw = amixer->rsc.hw;
+	input = amixer->input;
+	sum = amixer->sum;
+
+	/* Program master and conjugate resources */
+	amixer->rsc.ops->master(&amixer->rsc);
+	if (NULL != input)
+		input->ops->master(input);
+
+	if (NULL != sum)
+		sum->rsc.ops->master(&sum->rsc);
+
+	for (i = 0; i < amixer->rsc.msr; i++) {
+		hw->amixer_set_dirty_all(amixer->rsc.ctrl_blk);
+		if (NULL != input) {
+			hw->amixer_set_x(amixer->rsc.ctrl_blk,
+						input->ops->output_slot(input));
+			input->ops->next_conj(input);
+		}
+		if (NULL != sum) {
+			hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
+						sum->rsc.ops->index(&sum->rsc));
+			sum->rsc.ops->next_conj(&sum->rsc);
+		}
+		index = amixer->rsc.ops->output_slot(&amixer->rsc);
+		hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk);
+		amixer->rsc.ops->next_conj(&amixer->rsc);
+	}
+	amixer->rsc.ops->master(&amixer->rsc);
+	if (NULL != input)
+		input->ops->master(input);
+
+	if (NULL != sum)
+		sum->rsc.ops->master(&sum->rsc);
+
+	return 0;
+}
+
+static int amixer_commit_raw_write(struct amixer *amixer)
+{
+	struct hw *hw;
+	unsigned int index;
+
+	hw = amixer->rsc.hw;
+	index = amixer->rsc.ops->output_slot(&amixer->rsc);
+	hw->amixer_commit_write(hw, index, amixer->rsc.ctrl_blk);
+
+	return 0;
+}
+
+static int amixer_get_y(struct amixer *amixer)
+{
+	struct hw *hw;
+
+	hw = amixer->rsc.hw;
+	return hw->amixer_get_y(amixer->rsc.ctrl_blk);
+}
+
+static int amixer_setup(struct amixer *amixer, struct rsc *input,
+			unsigned int scale, struct sum *sum)
+{
+	amixer_set_input(amixer, input);
+	amixer_set_y(amixer, scale);
+	amixer_set_sum(amixer, sum);
+	amixer_commit_write(amixer);
+	return 0;
+}
+
+static struct amixer_rsc_ops amixer_ops = {
+	.set_input		= amixer_set_input,
+	.set_invalid_squash	= amixer_set_invalid_squash,
+	.set_scale		= amixer_set_y,
+	.set_sum		= amixer_set_sum,
+	.commit_write		= amixer_commit_write,
+	.commit_raw_write	= amixer_commit_raw_write,
+	.setup			= amixer_setup,
+	.get_scale		= amixer_get_y,
+};
+
+static int amixer_rsc_init(struct amixer *amixer,
+			   const struct amixer_desc *desc,
+			   struct amixer_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&amixer->rsc, amixer->idx[0],
+			AMIXER, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	/* Set amixer specific operations */
+	amixer->rsc.ops = &amixer_basic_rsc_ops;
+	amixer->ops = &amixer_ops;
+	amixer->input = NULL;
+	amixer->sum = NULL;
+
+	amixer_setup(amixer, NULL, 0, NULL);
+
+	return 0;
+}
+
+static int amixer_rsc_uninit(struct amixer *amixer)
+{
+	amixer_setup(amixer, NULL, 0, NULL);
+	rsc_uninit(&amixer->rsc);
+	amixer->ops = NULL;
+	amixer->input = NULL;
+	amixer->sum = NULL;
+	return 0;
+}
+
+static int get_amixer_rsc(struct amixer_mgr *mgr,
+			  const struct amixer_desc *desc,
+			  struct amixer **ramixer)
+{
+	int err, i;
+	unsigned int idx;
+	struct amixer *amixer;
+	unsigned long flags;
+
+	*ramixer = NULL;
+
+	/* Allocate mem for amixer resource */
+	amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
+	if (NULL == amixer) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient
+	 * amixer resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		amixer->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet AMIXER resource request!\n");
+		goto error;
+	}
+
+	err = amixer_rsc_init(amixer, desc, mgr);
+	if (err)
+		goto error;
+
+	*ramixer = amixer;
+
+	return 0;
+
+error:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(amixer);
+	return err;
+}
+
+static int put_amixer_rsc(struct amixer_mgr *mgr, struct amixer *amixer)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < amixer->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, amixer->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	amixer_rsc_uninit(amixer);
+	kfree(amixer);
+
+	return 0;
+}
+
+int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr)
+{
+	int err;
+	struct amixer_mgr *amixer_mgr;
+
+	*ramixer_mgr = NULL;
+	amixer_mgr = kzalloc(sizeof(*amixer_mgr), GFP_KERNEL);
+	if (NULL == amixer_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&amixer_mgr->mgr, AMIXER, AMIXER_RESOURCE_NUM, hw);
+	if (err)
+		goto error;
+
+	spin_lock_init(&amixer_mgr->mgr_lock);
+
+	amixer_mgr->get_amixer = get_amixer_rsc;
+	amixer_mgr->put_amixer = put_amixer_rsc;
+
+	*ramixer_mgr = amixer_mgr;
+
+	return 0;
+
+error:
+	kfree(amixer_mgr);
+	return err;
+}
+
+int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr)
+{
+	rsc_mgr_uninit(&amixer_mgr->mgr);
+	kfree(amixer_mgr);
+	return 0;
+}
+
+/* SUM resource management */
+
+static int sum_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0];
+}
+
+static int sum_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
+}
+
+static int sum_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct sum, rsc)->idx[rsc->conj];
+}
+
+static int sum_output_slot(const struct rsc *rsc)
+{
+	return (sum_index(rsc) << 4) + 0xc;
+}
+
+static struct rsc_ops sum_basic_rsc_ops = {
+	.master		= sum_master,
+	.next_conj	= sum_next_conj,
+	.index		= sum_index,
+	.output_slot	= sum_output_slot,
+};
+
+static int sum_rsc_init(struct sum *sum,
+			const struct sum_desc *desc,
+			struct sum_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&sum->rsc, sum->idx[0], SUM, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	sum->rsc.ops = &sum_basic_rsc_ops;
+
+	return 0;
+}
+
+static int sum_rsc_uninit(struct sum *sum)
+{
+	rsc_uninit(&sum->rsc);
+	return 0;
+}
+
+static int get_sum_rsc(struct sum_mgr *mgr,
+		       const struct sum_desc *desc,
+		       struct sum **rsum)
+{
+	int err, i;
+	unsigned int idx;
+	struct sum *sum;
+	unsigned long flags;
+
+	*rsum = NULL;
+
+	/* Allocate mem for sum resource */
+	sum = kzalloc(sizeof(*sum), GFP_KERNEL);
+	if (NULL == sum) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient sum resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		sum->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SUM resource request!\n");
+		goto error;
+	}
+
+	err = sum_rsc_init(sum, desc, mgr);
+	if (err)
+		goto error;
+
+	*rsum = sum;
+
+	return 0;
+
+error:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, sum->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(sum);
+	return err;
+}
+
+static int put_sum_rsc(struct sum_mgr *mgr, struct sum *sum)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < sum->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, sum->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	sum_rsc_uninit(sum);
+	kfree(sum);
+
+	return 0;
+}
+
+int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr)
+{
+	int err;
+	struct sum_mgr *sum_mgr;
+
+	*rsum_mgr = NULL;
+	sum_mgr = kzalloc(sizeof(*sum_mgr), GFP_KERNEL);
+	if (NULL == sum_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&sum_mgr->mgr, SUM, SUM_RESOURCE_NUM, hw);
+	if (err)
+		goto error;
+
+	spin_lock_init(&sum_mgr->mgr_lock);
+
+	sum_mgr->get_sum = get_sum_rsc;
+	sum_mgr->put_sum = put_sum_rsc;
+
+	*rsum_mgr = sum_mgr;
+
+	return 0;
+
+error:
+	kfree(sum_mgr);
+	return err;
+}
+
+int sum_mgr_destroy(struct sum_mgr *sum_mgr)
+{
+	rsc_mgr_uninit(&sum_mgr->mgr);
+	kfree(sum_mgr);
+	return 0;
+}
+
diff --git a/sound/pci/ctxfi/ctamixer.h b/sound/pci/ctxfi/ctamixer.h
new file mode 100644
index 00000000000..cc49e5ab475
--- /dev/null
+++ b/sound/pci/ctxfi/ctamixer.h
@@ -0,0 +1,96 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctamixer.h
+ *
+ * @Brief
+ * This file contains the definition of the Audio Mixer
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 21 2008
+ *
+ */
+
+#ifndef CTAMIXER_H
+#define CTAMIXER_H
+
+#include "ctresource.h"
+#include <linux/spinlock.h>
+
+/* Define the descriptor of a summation node resource */
+struct sum {
+	struct rsc rsc;		/* Basic resource info */
+	unsigned char idx[8];
+};
+
+/* Define sum resource request description info */
+struct sum_desc {
+	unsigned int msr;
+};
+
+struct sum_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request one sum resource */
+	int (*get_sum)(struct sum_mgr *mgr,
+			const struct sum_desc *desc, struct sum **rsum);
+	/* return one sum resource */
+	int (*put_sum)(struct sum_mgr *mgr, struct sum *sum);
+};
+
+/* Constructor and destructor of daio resource manager */
+int sum_mgr_create(void *hw, struct sum_mgr **rsum_mgr);
+int sum_mgr_destroy(struct sum_mgr *sum_mgr);
+
+/* Define the descriptor of a amixer resource */
+struct amixer_rsc_ops;
+
+struct amixer {
+	struct rsc rsc;		/* Basic resource info */
+	unsigned char idx[8];
+	struct rsc *input;	/* pointer to a resource acting as source */
+	struct sum *sum;	/* Put amixer output to this summation node */
+	struct amixer_rsc_ops *ops;	/* AMixer specific operations */
+};
+
+struct amixer_rsc_ops {
+	int (*set_input)(struct amixer *amixer, struct rsc *rsc);
+	int (*set_scale)(struct amixer *amixer, unsigned int scale);
+	int (*set_invalid_squash)(struct amixer *amixer, unsigned int iv);
+	int (*set_sum)(struct amixer *amixer, struct sum *sum);
+	int (*commit_write)(struct amixer *amixer);
+	/* Only for interleaved recording */
+	int (*commit_raw_write)(struct amixer *amixer);
+	int (*setup)(struct amixer *amixer, struct rsc *input,
+			unsigned int scale, struct sum *sum);
+	int (*get_scale)(struct amixer *amixer);
+};
+
+/* Define amixer resource request description info */
+struct amixer_desc {
+	unsigned int msr;
+};
+
+struct amixer_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request one amixer resource */
+	int (*get_amixer)(struct amixer_mgr *mgr,
+			  const struct amixer_desc *desc,
+			  struct amixer **ramixer);
+	/* return one amixer resource */
+	int (*put_amixer)(struct amixer_mgr *mgr, struct amixer *amixer);
+};
+
+/* Constructor and destructor of amixer resource manager */
+int amixer_mgr_create(void *hw, struct amixer_mgr **ramixer_mgr);
+int amixer_mgr_destroy(struct amixer_mgr *amixer_mgr);
+
+#endif /* CTAMIXER_H */
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
new file mode 100644
index 00000000000..80fb2baed7a
--- /dev/null
+++ b/sound/pci/ctxfi/ctatc.c
@@ -0,0 +1,1619 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctatc.c
+ *
+ * @Brief
+ * This file contains the implementation of the device resource management
+ * object.
+ *
+ * @Author Liu Chun
+ * @Date Mar 28 2008
+ */
+
+#include "ctatc.h"
+#include "ctpcm.h"
+#include "ctmixer.h"
+#include "cthardware.h"
+#include "ctsrc.h"
+#include "ctamixer.h"
+#include "ctdaio.h"
+#include "cttimer.h"
+#include <linux/delay.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+#include <sound/asoundef.h>
+
+#define MONO_SUM_SCALE	0x19a8	/* 2^(-0.5) in 14-bit floating format */
+#define DAIONUM		7
+#define MAX_MULTI_CHN	8
+
+#define IEC958_DEFAULT_CON ((IEC958_AES0_NONAUDIO \
+			    | IEC958_AES0_CON_NOT_COPYRIGHT) \
+			    | ((IEC958_AES1_CON_MIXER \
+			    | IEC958_AES1_CON_ORIGINAL) << 8) \
+			    | (0x10 << 16) \
+			    | ((IEC958_AES3_CON_FS_48000) << 24))
+
+static struct snd_pci_quirk __devinitdata subsys_20k1_list[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0022, "SB055x", CTSB055X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x002f, "SB055x", CTSB055X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0029, "SB073x", CTSB073X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0031, "SB073x", CTSB073X),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, 0x6000,
+			   "UAA", CTUAA),
+	SND_PCI_QUIRK_VENDOR(PCI_VENDOR_ID_CREATIVE,
+			     "Unknown", CT20K1_UNKNOWN),
+	{ } /* terminator */
+};
+
+static struct snd_pci_quirk __devinitdata subsys_20k2_list[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB0760,
+		      "SB0760", CTSB0760),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08801,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08802,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, PCI_SUBDEVICE_ID_CREATIVE_SB08803,
+		      "SB0880", CTSB0880),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000,
+			   PCI_SUBDEVICE_ID_CREATIVE_HENDRIX, "HENDRIX",
+			   CTHENDRIX),
+	{ } /* terminator */
+};
+
+static const char *ct_subsys_name[NUM_CTCARDS] = {
+	[CTSB055X]	= "SB055x",
+	[CTSB073X]	= "SB073x",
+	[CTSB0760]	= "SB076x",
+	[CTUAA]		= "UAA",
+	[CT20K1_UNKNOWN] = "Unknown",
+	[CTHENDRIX]	= "Hendrix",
+	[CTSB0880]	= "SB0880",
+};
+
+static struct {
+	int (*create)(struct ct_atc *atc,
+			enum CTALSADEVS device, const char *device_name);
+	int (*destroy)(void *alsa_dev);
+	const char *public_name;
+} alsa_dev_funcs[NUM_CTALSADEVS] = {
+	[FRONT]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Front/WaveIn"},
+	[SURROUND]	= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Surround"},
+	[CLFE]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Center/LFE"},
+	[SIDE]		= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "Side"},
+	[IEC958]	= { .create = ct_alsa_pcm_create,
+			    .destroy = NULL,
+			    .public_name = "IEC958 Non-audio"},
+
+	[MIXER]		= { .create = ct_alsa_mix_create,
+			    .destroy = NULL,
+			    .public_name = "Mixer"}
+};
+
+typedef int (*create_t)(void *, void **);
+typedef int (*destroy_t)(void *);
+
+static struct {
+	int (*create)(void *hw, void **rmgr);
+	int (*destroy)(void *mgr);
+} rsc_mgr_funcs[NUM_RSCTYP] = {
+	[SRC] 		= { .create 	= (create_t)src_mgr_create,
+			    .destroy 	= (destroy_t)src_mgr_destroy	},
+	[SRCIMP] 	= { .create 	= (create_t)srcimp_mgr_create,
+			    .destroy 	= (destroy_t)srcimp_mgr_destroy	},
+	[AMIXER]	= { .create	= (create_t)amixer_mgr_create,
+			    .destroy	= (destroy_t)amixer_mgr_destroy	},
+	[SUM]		= { .create	= (create_t)sum_mgr_create,
+			    .destroy	= (destroy_t)sum_mgr_destroy	},
+	[DAIO]		= { .create	= (create_t)daio_mgr_create,
+			    .destroy	= (destroy_t)daio_mgr_destroy	}
+};
+
+static int
+atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+
+/* *
+ * Only mono and interleaved modes are supported now.
+ * Always allocates a contiguous channel block.
+ * */
+
+static int ct_map_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct snd_pcm_runtime *runtime;
+	struct ct_vm *vm;
+
+	if (NULL == apcm->substream)
+		return 0;
+
+	runtime = apcm->substream->runtime;
+	vm = atc->vm;
+
+	apcm->vm_block = vm->map(vm, apcm->substream, runtime->dma_bytes);
+
+	if (NULL == apcm->vm_block)
+		return -ENOENT;
+
+	return 0;
+}
+
+static void ct_unmap_audio_buffer(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct ct_vm *vm;
+
+	if (NULL == apcm->vm_block)
+		return;
+
+	vm = atc->vm;
+
+	vm->unmap(vm, apcm->vm_block);
+
+	apcm->vm_block = NULL;
+}
+
+static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index)
+{
+	struct ct_vm *vm;
+	void *kvirt_addr;
+	unsigned long phys_addr;
+
+	vm = atc->vm;
+	kvirt_addr = vm->get_ptp_virt(vm, index);
+	if (kvirt_addr == NULL)
+		phys_addr = (~0UL);
+	else
+		phys_addr = virt_to_phys(kvirt_addr);
+
+	return phys_addr;
+}
+
+static unsigned int convert_format(snd_pcm_format_t snd_format)
+{
+	switch (snd_format) {
+	case SNDRV_PCM_FORMAT_U8:
+		return SRC_SF_U8;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		return SRC_SF_S16;
+	case SNDRV_PCM_FORMAT_S24_3LE:
+		return SRC_SF_S24;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		return SRC_SF_S32;
+	case SNDRV_PCM_FORMAT_FLOAT_LE:
+		return SRC_SF_F32;
+	default:
+		printk(KERN_ERR "ctxfi: not recognized snd format is %d \n",
+			snd_format);
+		return SRC_SF_S16;
+	}
+}
+
+static unsigned int
+atc_get_pitch(unsigned int input_rate, unsigned int output_rate)
+{
+	unsigned int pitch;
+	int b;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = (input_rate / output_rate) << 24;
+	input_rate %= output_rate;
+	input_rate /= 100;
+	output_rate /= 100;
+	for (b = 31; ((b >= 0) && !(input_rate >> b)); )
+		b--;
+
+	if (b >= 0) {
+		input_rate <<= (31 - b);
+		input_rate /= output_rate;
+		b = 24 - (31 - b);
+		if (b >= 0)
+			input_rate <<= b;
+		else
+			input_rate >>= -b;
+
+		pitch |= input_rate;
+	}
+
+	return pitch;
+}
+
+static int select_rom(unsigned int pitch)
+{
+	if ((pitch > 0x00428f5c) && (pitch < 0x01b851ec)) {
+		/* 0.26 <= pitch <= 1.72 */
+		return 1;
+	} else if ((0x01d66666 == pitch) || (0x01d66667 == pitch)) {
+		/* pitch == 1.8375 */
+		return 2;
+	} else if (0x02000000 == pitch) {
+		/* pitch == 2 */
+		return 3;
+	} else if ((pitch >= 0x0) && (pitch <= 0x08000000)) {
+		/* 0 <= pitch <= 8 */
+		return 0;
+	} else {
+		return -ENOENT;
+	}
+}
+
+static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct src_desc desc = {0};
+	struct amixer_desc mix_dsc = {0};
+	struct src *src;
+	struct amixer *amixer;
+	int err;
+	int n_amixer = apcm->substream->runtime->channels, i = 0;
+	int device = apcm->substream->pcm->device;
+	unsigned int pitch;
+	unsigned long flags;
+
+	if (NULL != apcm->src) {
+		/* Prepared pcm playback */
+		return 0;
+	}
+
+	/* first release old resources */
+	atc->pcm_release_resources(atc, apcm);
+
+	/* Get SRC resource */
+	desc.multi = apcm->substream->runtime->channels;
+	desc.msr = atc->msr;
+	desc.mode = MEMRD;
+	err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch(apcm->substream->runtime->rate,
+						(atc->rsr * atc->msr));
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+	src->ops->set_rom(src, select_rom(pitch));
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL));
+
+	/* Get AMIXER resource */
+	n_amixer = (n_amixer < 2) ? 2 : n_amixer;
+	apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+	if (NULL == apcm->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mix_dsc.msr = atc->msr;
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	/* Connect resources */
+	src = apcm->src;
+	for (i = 0; i < n_amixer; i++) {
+		amixer = apcm->amixers[i];
+		spin_lock_irqsave(&atc->atc_lock, flags);
+		amixer->ops->setup(amixer, &src->rsc,
+					INIT_VOL, atc->pcm[i+device*2]);
+		spin_unlock_irqrestore(&atc->atc_lock, flags);
+		src = src->ops->next_interleave(src);
+		if (NULL == src)
+			src = apcm->src;
+	}
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int
+atc_pcm_release_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM];
+	struct srcimp *srcimp;
+	int i;
+
+	if (NULL != apcm->srcimps) {
+		for (i = 0; i < apcm->n_srcimp; i++) {
+			srcimp = apcm->srcimps[i];
+			srcimp->ops->unmap(srcimp);
+			srcimp_mgr->put_srcimp(srcimp_mgr, srcimp);
+			apcm->srcimps[i] = NULL;
+		}
+		kfree(apcm->srcimps);
+		apcm->srcimps = NULL;
+	}
+
+	if (NULL != apcm->srccs) {
+		for (i = 0; i < apcm->n_srcc; i++) {
+			src_mgr->put_src(src_mgr, apcm->srccs[i]);
+			apcm->srccs[i] = NULL;
+		}
+		kfree(apcm->srccs);
+		apcm->srccs = NULL;
+	}
+
+	if (NULL != apcm->amixers) {
+		for (i = 0; i < apcm->n_amixer; i++) {
+			amixer_mgr->put_amixer(amixer_mgr, apcm->amixers[i]);
+			apcm->amixers[i] = NULL;
+		}
+		kfree(apcm->amixers);
+		apcm->amixers = NULL;
+	}
+
+	if (NULL != apcm->mono) {
+		sum_mgr->put_sum(sum_mgr, apcm->mono);
+		apcm->mono = NULL;
+	}
+
+	if (NULL != apcm->src) {
+		src_mgr->put_src(src_mgr, apcm->src);
+		apcm->src = NULL;
+	}
+
+	if (NULL != apcm->vm_block) {
+		/* Undo device virtual mem map */
+		ct_unmap_audio_buffer(atc, apcm);
+		apcm->vm_block = NULL;
+	}
+
+	return 0;
+}
+
+static int atc_pcm_playback_start(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	unsigned int max_cisz;
+	struct src *src = apcm->src;
+
+	if (apcm->started)
+		return 0;
+	apcm->started = 1;
+
+	max_cisz = src->multi * src->rsc.msr;
+	max_cisz = 0x80 * (max_cisz < 8 ? max_cisz : 8);
+
+	src->ops->set_sa(src, apcm->vm_block->addr);
+	src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size);
+	src->ops->set_ca(src, apcm->vm_block->addr + max_cisz);
+	src->ops->set_cisz(src, max_cisz);
+
+	src->ops->set_bm(src, 1);
+	src->ops->set_state(src, SRC_STATE_INIT);
+	src->ops->commit_write(src);
+
+	ct_timer_start(apcm->timer);
+	return 0;
+}
+
+static int atc_pcm_stop(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	int i;
+
+	ct_timer_stop(apcm->timer);
+
+	src = apcm->src;
+	src->ops->set_bm(src, 0);
+	src->ops->set_state(src, SRC_STATE_OFF);
+	src->ops->commit_write(src);
+
+	if (NULL != apcm->srccs) {
+		for (i = 0; i < apcm->n_srcc; i++) {
+			src = apcm->srccs[i];
+			src->ops->set_bm(src, 0);
+			src->ops->set_state(src, SRC_STATE_OFF);
+			src->ops->commit_write(src);
+		}
+	}
+
+	apcm->started = 0;
+
+	return 0;
+}
+
+static int
+atc_pcm_playback_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src = apcm->src;
+	u32 size, max_cisz;
+	int position;
+
+	if (!src)
+		return 0;
+	position = src->ops->get_ca(src);
+
+	size = apcm->vm_block->size;
+	max_cisz = src->multi * src->rsc.msr;
+	max_cisz = 128 * (max_cisz < 8 ? max_cisz : 8);
+
+	return (position + size - max_cisz - apcm->vm_block->addr) % size;
+}
+
+struct src_node_conf_t {
+	unsigned int pitch;
+	unsigned int msr:8;
+	unsigned int mix_msr:8;
+	unsigned int imp_msr:8;
+	unsigned int vo:1;
+};
+
+static void setup_src_node_conf(struct ct_atc *atc, struct ct_atc_pcm *apcm,
+				struct src_node_conf_t *conf, int *n_srcc)
+{
+	unsigned int pitch;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+	*n_srcc = 0;
+
+	if (1 == atc->msr) {
+		*n_srcc = apcm->substream->runtime->channels;
+		conf[0].pitch = pitch;
+		conf[0].mix_msr = conf[0].imp_msr = conf[0].msr = 1;
+		conf[0].vo = 1;
+	} else if (2 == atc->msr) {
+		if (0x8000000 < pitch) {
+			/* Need two-stage SRCs, SRCIMPs and
+			 * AMIXERs for converting format */
+			conf[0].pitch = (atc->msr << 24);
+			conf[0].msr = conf[0].mix_msr = 1;
+			conf[0].imp_msr = atc->msr;
+			conf[0].vo = 0;
+			conf[1].pitch = atc_get_pitch(atc->rsr,
+					apcm->substream->runtime->rate);
+			conf[1].msr = conf[1].mix_msr = conf[1].imp_msr = 1;
+			conf[1].vo = 1;
+			*n_srcc = apcm->substream->runtime->channels * 2;
+		} else if (0x1000000 < pitch) {
+			/* Need one-stage SRCs, SRCIMPs and
+			 * AMIXERs for converting format */
+			conf[0].pitch = pitch;
+			conf[0].msr = conf[0].mix_msr
+				    = conf[0].imp_msr = atc->msr;
+			conf[0].vo = 1;
+			*n_srcc = apcm->substream->runtime->channels;
+		}
+	}
+}
+
+static int
+atc_pcm_capture_get_resources(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct srcimp_mgr *srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct sum_mgr *sum_mgr = atc->rsc_mgrs[SUM];
+	struct src_desc src_dsc = {0};
+	struct src *src;
+	struct srcimp_desc srcimp_dsc = {0};
+	struct srcimp *srcimp;
+	struct amixer_desc mix_dsc = {0};
+	struct sum_desc sum_dsc = {0};
+	unsigned int pitch;
+	int multi, err, i;
+	int n_srcimp, n_amixer, n_srcc, n_sum;
+	struct src_node_conf_t src_node_conf[2] = {{0} };
+
+	/* first release old resources */
+	atc_pcm_release_resources(atc, apcm);
+
+	/* The numbers of converting SRCs and SRCIMPs should be determined
+	 * by pitch value. */
+
+	multi = apcm->substream->runtime->channels;
+
+	/* get pitch and convert to fixed-point 8.24 format. */
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+
+	setup_src_node_conf(atc, apcm, src_node_conf, &n_srcc);
+	n_sum = (1 == multi) ? 1 : 0;
+	n_amixer = n_sum * 2 + n_srcc;
+	n_srcimp = n_srcc;
+	if ((multi > 1) && (0x8000000 >= pitch)) {
+		/* Need extra AMIXERs and SRCIMPs for special treatment
+		 * of interleaved recording of conjugate channels */
+		n_amixer += multi * atc->msr;
+		n_srcimp += multi * atc->msr;
+	} else {
+		n_srcimp += multi;
+	}
+
+	if (n_srcc) {
+		apcm->srccs = kzalloc(sizeof(void *)*n_srcc, GFP_KERNEL);
+		if (NULL == apcm->srccs)
+			return -ENOMEM;
+	}
+	if (n_amixer) {
+		apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+		if (NULL == apcm->amixers) {
+			err = -ENOMEM;
+			goto error1;
+		}
+	}
+	apcm->srcimps = kzalloc(sizeof(void *)*n_srcimp, GFP_KERNEL);
+	if (NULL == apcm->srcimps) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	/* Allocate SRCs for sample rate conversion if needed */
+	src_dsc.multi = 1;
+	src_dsc.mode = ARCRW;
+	for (i = 0, apcm->n_srcc = 0; i < n_srcc; i++) {
+		src_dsc.msr = src_node_conf[i/multi].msr;
+		err = src_mgr->get_src(src_mgr, &src_dsc,
+					(struct src **)&apcm->srccs[i]);
+		if (err)
+			goto error1;
+
+		src = apcm->srccs[i];
+		pitch = src_node_conf[i/multi].pitch;
+		src->ops->set_pitch(src, pitch);
+		src->ops->set_rom(src, select_rom(pitch));
+		src->ops->set_vo(src, src_node_conf[i/multi].vo);
+
+		apcm->n_srcc++;
+	}
+
+	/* Allocate AMIXERs for routing SRCs of conversion if needed */
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		if (i < (n_sum*2))
+			mix_dsc.msr = atc->msr;
+		else if (i < (n_sum*2+n_srcc))
+			mix_dsc.msr = src_node_conf[(i-n_sum*2)/multi].mix_msr;
+		else
+			mix_dsc.msr = 1;
+
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Allocate a SUM resource to mix all input channels together */
+	sum_dsc.msr = atc->msr;
+	err = sum_mgr->get_sum(sum_mgr, &sum_dsc, (struct sum **)&apcm->mono);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+	/* Allocate SRCIMP resources */
+	for (i = 0, apcm->n_srcimp = 0; i < n_srcimp; i++) {
+		if (i < (n_srcc))
+			srcimp_dsc.msr = src_node_conf[i/multi].imp_msr;
+		else if (1 == multi)
+			srcimp_dsc.msr = (pitch <= 0x8000000) ? atc->msr : 1;
+		else
+			srcimp_dsc.msr = 1;
+
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc, &srcimp);
+		if (err)
+			goto error1;
+
+		apcm->srcimps[i] = srcimp;
+		apcm->n_srcimp++;
+	}
+
+	/* Allocate a SRC for writing data to host memory */
+	src_dsc.multi = apcm->substream->runtime->channels;
+	src_dsc.msr = 1;
+	src_dsc.mode = MEMWR;
+	err = src_mgr->get_src(src_mgr, &src_dsc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int atc_pcm_capture_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct amixer *amixer;
+	struct srcimp *srcimp;
+	struct ct_mixer *mixer = atc->mixer;
+	struct sum *mono;
+	struct rsc *out_ports[8] = {NULL};
+	int err, i, j, n_sum, multi;
+	unsigned int pitch;
+	int mix_base = 0, imp_base = 0;
+
+	if (NULL != apcm->src) {
+		/* Prepared pcm capture */
+		return 0;
+	}
+
+	/* Get needed resources. */
+	err = atc_pcm_capture_get_resources(atc, apcm);
+	if (err)
+		return err;
+
+	/* Connect resources */
+	mixer->get_output_ports(mixer, MIX_PCMO_FRONT,
+				&out_ports[0], &out_ports[1]);
+
+	multi = apcm->substream->runtime->channels;
+	if (1 == multi) {
+		mono = apcm->mono;
+		for (i = 0; i < 2; i++) {
+			amixer = apcm->amixers[i];
+			amixer->ops->setup(amixer, out_ports[i],
+						MONO_SUM_SCALE, mono);
+		}
+		out_ports[0] = &mono->rsc;
+		n_sum = 1;
+		mix_base = n_sum * 2;
+	}
+
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		srcimp = apcm->srcimps[imp_base+i];
+		amixer = apcm->amixers[mix_base+i];
+		srcimp->ops->map(srcimp, src, out_ports[i%multi]);
+		amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
+		out_ports[i%multi] = &amixer->rsc;
+	}
+
+	pitch = atc_get_pitch((atc->rsr * atc->msr),
+				apcm->substream->runtime->rate);
+
+	if ((multi > 1) && (pitch <= 0x8000000)) {
+		/* Special connection for interleaved
+		 * recording with conjugate channels */
+		for (i = 0; i < multi; i++) {
+			out_ports[i]->ops->master(out_ports[i]);
+			for (j = 0; j < atc->msr; j++) {
+				amixer = apcm->amixers[apcm->n_srcc+j*multi+i];
+				amixer->ops->set_input(amixer, out_ports[i]);
+				amixer->ops->set_scale(amixer, INIT_VOL);
+				amixer->ops->set_sum(amixer, NULL);
+				amixer->ops->commit_raw_write(amixer);
+				out_ports[i]->ops->next_conj(out_ports[i]);
+
+				srcimp = apcm->srcimps[apcm->n_srcc+j*multi+i];
+				srcimp->ops->map(srcimp, apcm->src,
+							&amixer->rsc);
+			}
+		}
+	} else {
+		for (i = 0; i < multi; i++) {
+			srcimp = apcm->srcimps[apcm->n_srcc+i];
+			srcimp->ops->map(srcimp, apcm->src, out_ports[i]);
+		}
+	}
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+}
+
+static int atc_pcm_capture_start(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	int i, multi;
+
+	if (apcm->started)
+		return 0;
+
+	apcm->started = 1;
+	multi = apcm->substream->runtime->channels;
+	/* Set up converting SRCs */
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		src->ops->set_pm(src, ((i%multi) != (multi-1)));
+		src_mgr->src_disable(src_mgr, src);
+	}
+
+	/*  Set up recording SRC */
+	src = apcm->src;
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_sa(src, apcm->vm_block->addr);
+	src->ops->set_la(src, apcm->vm_block->addr + apcm->vm_block->size);
+	src->ops->set_ca(src, apcm->vm_block->addr);
+	src_mgr->src_disable(src_mgr, src);
+
+	/* Disable relevant SRCs firstly */
+	src_mgr->commit_write(src_mgr);
+
+	/* Enable SRCs respectively */
+	for (i = 0; i < apcm->n_srcc; i++) {
+		src = apcm->srccs[i];
+		src->ops->set_state(src, SRC_STATE_RUN);
+		src->ops->commit_write(src);
+		src_mgr->src_enable_s(src_mgr, src);
+	}
+	src = apcm->src;
+	src->ops->set_bm(src, 1);
+	src->ops->set_state(src, SRC_STATE_RUN);
+	src->ops->commit_write(src);
+	src_mgr->src_enable_s(src_mgr, src);
+
+	/* Enable relevant SRCs synchronously */
+	src_mgr->commit_write(src_mgr);
+
+	ct_timer_start(apcm->timer);
+	return 0;
+}
+
+static int
+atc_pcm_capture_position(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src = apcm->src;
+
+	if (!src)
+		return 0;
+	return src->ops->get_ca(src) - apcm->vm_block->addr;
+}
+
+static int spdif_passthru_playback_get_resources(struct ct_atc *atc,
+						 struct ct_atc_pcm *apcm)
+{
+	struct src_mgr *src_mgr = atc->rsc_mgrs[SRC];
+	struct amixer_mgr *amixer_mgr = atc->rsc_mgrs[AMIXER];
+	struct src_desc desc = {0};
+	struct amixer_desc mix_dsc = {0};
+	struct src *src;
+	int err;
+	int n_amixer = apcm->substream->runtime->channels, i;
+	unsigned int pitch, rsr = atc->pll_rate;
+
+	/* first release old resources */
+	atc_pcm_release_resources(atc, apcm);
+
+	/* Get SRC resource */
+	desc.multi = apcm->substream->runtime->channels;
+	desc.msr = 1;
+	while (apcm->substream->runtime->rate > (rsr * desc.msr))
+		desc.msr <<= 1;
+
+	desc.mode = MEMRD;
+	err = src_mgr->get_src(src_mgr, &desc, (struct src **)&apcm->src);
+	if (err)
+		goto error1;
+
+	pitch = atc_get_pitch(apcm->substream->runtime->rate, (rsr * desc.msr));
+	src = apcm->src;
+	src->ops->set_pitch(src, pitch);
+	src->ops->set_rom(src, select_rom(pitch));
+	src->ops->set_sf(src, convert_format(apcm->substream->runtime->format));
+	src->ops->set_pm(src, (src->ops->next_interleave(src) != NULL));
+	src->ops->set_bp(src, 1);
+
+	/* Get AMIXER resource */
+	n_amixer = (n_amixer < 2) ? 2 : n_amixer;
+	apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
+	if (NULL == apcm->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mix_dsc.msr = desc.msr;
+	for (i = 0, apcm->n_amixer = 0; i < n_amixer; i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &mix_dsc,
+					(struct amixer **)&apcm->amixers[i]);
+		if (err)
+			goto error1;
+
+		apcm->n_amixer++;
+	}
+
+	/* Set up device virtual mem map */
+	err = ct_map_audio_buffer(atc, apcm);
+	if (err < 0)
+		goto error1;
+
+	return 0;
+
+error1:
+	atc_pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int atc_pll_init(struct ct_atc *atc, int rate)
+{
+	struct hw *hw = atc->hw;
+	int err;
+	err = hw->pll_init(hw, rate);
+	atc->pll_rate = err ? 0 : rate;
+	return err;
+}
+
+static int
+spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	unsigned long flags;
+	unsigned int rate = apcm->substream->runtime->rate;
+	unsigned int status;
+	int err;
+	unsigned char iec958_con_fs;
+
+	switch (rate) {
+	case 48000:
+		iec958_con_fs = IEC958_AES3_CON_FS_48000;
+		break;
+	case 44100:
+		iec958_con_fs = IEC958_AES3_CON_FS_44100;
+		break;
+	case 32000:
+		iec958_con_fs = IEC958_AES3_CON_FS_32000;
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	spin_lock_irqsave(&atc->atc_lock, flags);
+	dao->ops->get_spos(dao, &status);
+	if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) {
+		status &= ((~IEC958_AES3_CON_FS) << 24);
+		status |= (iec958_con_fs << 24);
+		dao->ops->set_spos(dao, status);
+		dao->ops->commit_write(dao);
+	}
+	if ((rate != atc->pll_rate) && (32000 != rate))
+		err = atc_pll_init(atc, rate);
+	spin_unlock_irqrestore(&atc->atc_lock, flags);
+
+	return err;
+}
+
+static int
+spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+{
+	struct src *src;
+	struct amixer *amixer;
+	struct dao *dao;
+	int err;
+	int i;
+	unsigned long flags;
+
+	if (NULL != apcm->src)
+		return 0;
+
+	/* Configure SPDIFOO and PLL to passthrough mode;
+	 * determine pll_rate. */
+	err = spdif_passthru_playback_setup(atc, apcm);
+	if (err)
+		return err;
+
+	/* Get needed resources. */
+	err = spdif_passthru_playback_get_resources(atc, apcm);
+	if (err)
+		return err;
+
+	/* Connect resources */
+	src = apcm->src;
+	for (i = 0; i < apcm->n_amixer; i++) {
+		amixer = apcm->amixers[i];
+		amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
+		src = src->ops->next_interleave(src);
+		if (NULL == src)
+			src = apcm->src;
+	}
+	/* Connect to SPDIFOO */
+	spin_lock_irqsave(&atc->atc_lock, flags);
+	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	amixer = apcm->amixers[0];
+	dao->ops->set_left_input(dao, &amixer->rsc);
+	amixer = apcm->amixers[1];
+	dao->ops->set_right_input(dao, &amixer->rsc);
+	spin_unlock_irqrestore(&atc->atc_lock, flags);
+
+	ct_timer_prepare(apcm->timer);
+
+	return 0;
+}
+
+static int atc_select_line_in(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct ct_mixer *mixer = atc->mixer;
+	struct src *src;
+
+	if (hw->is_adc_source_selected(hw, ADC_LINEIN))
+		return 0;
+
+	mixer->set_input_left(mixer, MIX_MIC_IN, NULL);
+	mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
+
+	hw->select_adc_source(hw, ADC_LINEIN);
+
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc);
+
+	return 0;
+}
+
+static int atc_select_mic_in(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+	struct ct_mixer *mixer = atc->mixer;
+	struct src *src;
+
+	if (hw->is_adc_source_selected(hw, ADC_MICIN))
+		return 0;
+
+	mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
+	mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
+
+	hw->select_adc_source(hw, ADC_MICIN);
+
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_MIC_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_MIC_IN, &src->rsc);
+
+	return 0;
+}
+
+static int atc_have_digit_io_switch(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+
+	return hw->have_digit_io_switch(hw);
+}
+
+static int atc_select_digit_io(struct ct_atc *atc)
+{
+	struct hw *hw = atc->hw;
+
+	if (hw->is_adc_source_selected(hw, ADC_NONE))
+		return 0;
+
+	hw->select_adc_source(hw, ADC_NONE);
+
+	return 0;
+}
+
+static int atc_daio_unmute(struct ct_atc *atc, unsigned char state, int type)
+{
+	struct daio_mgr *daio_mgr = atc->rsc_mgrs[DAIO];
+
+	if (state)
+		daio_mgr->daio_enable(daio_mgr, atc->daios[type]);
+	else
+		daio_mgr->daio_disable(daio_mgr, atc->daios[type]);
+
+	daio_mgr->commit_write(daio_mgr);
+
+	return 0;
+}
+
+static int
+atc_dao_get_status(struct ct_atc *atc, unsigned int *status, int type)
+{
+	struct dao *dao = container_of(atc->daios[type], struct dao, daio);
+	return dao->ops->get_spos(dao, status);
+}
+
+static int
+atc_dao_set_status(struct ct_atc *atc, unsigned int status, int type)
+{
+	struct dao *dao = container_of(atc->daios[type], struct dao, daio);
+
+	dao->ops->set_spos(dao, status);
+	dao->ops->commit_write(dao);
+	return 0;
+}
+
+static int atc_line_front_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO1);
+}
+
+static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO4);
+}
+
+static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO3);
+}
+
+static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEO2);
+}
+
+static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, LINEIM);
+}
+
+static int atc_spdif_out_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, SPDIFOO);
+}
+
+static int atc_spdif_in_unmute(struct ct_atc *atc, unsigned char state)
+{
+	return atc_daio_unmute(atc, state, SPDIFIO);
+}
+
+static int atc_spdif_out_get_status(struct ct_atc *atc, unsigned int *status)
+{
+	return atc_dao_get_status(atc, status, SPDIFOO);
+}
+
+static int atc_spdif_out_set_status(struct ct_atc *atc, unsigned int status)
+{
+	return atc_dao_set_status(atc, status, SPDIFOO);
+}
+
+static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
+{
+	unsigned long flags;
+	struct dao_desc da_dsc = {0};
+	struct dao *dao;
+	int err;
+	struct ct_mixer *mixer = atc->mixer;
+	struct rsc *rscs[2] = {NULL};
+	unsigned int spos = 0;
+
+	spin_lock_irqsave(&atc->atc_lock, flags);
+	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
+	da_dsc.msr = state ? 1 : atc->msr;
+	da_dsc.passthru = state ? 1 : 0;
+	err = dao->ops->reinit(dao, &da_dsc);
+	if (state) {
+		spos = IEC958_DEFAULT_CON;
+	} else {
+		mixer->get_output_ports(mixer, MIX_SPDIF_OUT,
+					&rscs[0], &rscs[1]);
+		dao->ops->set_left_input(dao, rscs[0]);
+		dao->ops->set_right_input(dao, rscs[1]);
+		/* Restore PLL to atc->rsr if needed. */
+		if (atc->pll_rate != atc->rsr)
+			err = atc_pll_init(atc, atc->rsr);
+	}
+	dao->ops->set_spos(dao, spos);
+	dao->ops->commit_write(dao);
+	spin_unlock_irqrestore(&atc->atc_lock, flags);
+
+	return err;
+}
+
+static int ct_atc_destroy(struct ct_atc *atc)
+{
+	struct daio_mgr *daio_mgr;
+	struct dao *dao;
+	struct dai *dai;
+	struct daio *daio;
+	struct sum_mgr *sum_mgr;
+	struct src_mgr *src_mgr;
+	struct srcimp_mgr *srcimp_mgr;
+	struct srcimp *srcimp;
+	struct ct_mixer *mixer;
+	int i = 0;
+
+	if (NULL == atc)
+		return 0;
+
+	if (atc->timer) {
+		ct_timer_free(atc->timer);
+		atc->timer = NULL;
+	}
+
+	/* Stop hardware and disable all interrupts */
+	if (NULL != atc->hw)
+		((struct hw *)atc->hw)->card_stop(atc->hw);
+
+	/* Destroy internal mixer objects */
+	if (NULL != atc->mixer) {
+		mixer = atc->mixer;
+		mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
+		mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
+		mixer->set_input_left(mixer, MIX_MIC_IN, NULL);
+		mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
+		mixer->set_input_left(mixer, MIX_SPDIF_IN, NULL);
+		mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
+		ct_mixer_destroy(atc->mixer);
+	}
+
+	if (NULL != atc->daios) {
+		daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
+		for (i = 0; i < atc->n_daio; i++) {
+			daio = atc->daios[i];
+			if (daio->type < LINEIM) {
+				dao = container_of(daio, struct dao, daio);
+				dao->ops->clear_left_input(dao);
+				dao->ops->clear_right_input(dao);
+			} else {
+				dai = container_of(daio, struct dai, daio);
+				/* some thing to do for dai ... */
+			}
+			daio_mgr->put_daio(daio_mgr, daio);
+		}
+		kfree(atc->daios);
+	}
+
+	if (NULL != atc->pcm) {
+		sum_mgr = atc->rsc_mgrs[SUM];
+		for (i = 0; i < atc->n_pcm; i++)
+			sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
+
+		kfree(atc->pcm);
+	}
+
+	if (NULL != atc->srcs) {
+		src_mgr = atc->rsc_mgrs[SRC];
+		for (i = 0; i < atc->n_src; i++)
+			src_mgr->put_src(src_mgr, atc->srcs[i]);
+
+		kfree(atc->srcs);
+	}
+
+	if (NULL != atc->srcimps) {
+		srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+		for (i = 0; i < atc->n_srcimp; i++) {
+			srcimp = atc->srcimps[i];
+			srcimp->ops->unmap(srcimp);
+			srcimp_mgr->put_srcimp(srcimp_mgr, atc->srcimps[i]);
+		}
+		kfree(atc->srcimps);
+	}
+
+	for (i = 0; i < NUM_RSCTYP; i++) {
+		if ((NULL != rsc_mgr_funcs[i].destroy) &&
+		    (NULL != atc->rsc_mgrs[i]))
+			rsc_mgr_funcs[i].destroy(atc->rsc_mgrs[i]);
+
+	}
+
+	if (NULL != atc->hw)
+		destroy_hw_obj((struct hw *)atc->hw);
+
+	/* Destroy device virtual memory manager object */
+	if (NULL != atc->vm) {
+		ct_vm_destroy(atc->vm);
+		atc->vm = NULL;
+	}
+
+	kfree(atc);
+
+	return 0;
+}
+
+static int atc_dev_free(struct snd_device *dev)
+{
+	struct ct_atc *atc = dev->device_data;
+	return ct_atc_destroy(atc);
+}
+
+static int __devinit atc_identify_card(struct ct_atc *atc)
+{
+	const struct snd_pci_quirk *p;
+	const struct snd_pci_quirk *list;
+
+	switch (atc->chip_type) {
+	case ATC20K1:
+		atc->chip_name = "20K1";
+		list = subsys_20k1_list;
+		break;
+	case ATC20K2:
+		atc->chip_name = "20K2";
+		list = subsys_20k2_list;
+		break;
+	default:
+		return -ENOENT;
+	}
+	p = snd_pci_quirk_lookup(atc->pci, list);
+	if (!p)
+		return -ENOENT;
+	atc->model = p->value;
+	atc->model_name = ct_subsys_name[atc->model];
+	snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n",
+		   atc->chip_name, atc->model_name,
+		   atc->pci->subsystem_vendor,
+		   atc->pci->subsystem_device);
+	return 0;
+}
+
+int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc)
+{
+	enum CTALSADEVS i;
+	int err;
+
+	alsa_dev_funcs[MIXER].public_name = atc->chip_name;
+
+	for (i = 0; i < NUM_CTALSADEVS; i++) {
+		if (NULL == alsa_dev_funcs[i].create)
+			continue;
+
+		err = alsa_dev_funcs[i].create(atc, i,
+				alsa_dev_funcs[i].public_name);
+		if (err) {
+			printk(KERN_ERR "ctxfi: "
+			       "Creating alsa device %d failed!\n", i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit atc_create_hw_devs(struct ct_atc *atc)
+{
+	struct hw *hw;
+	struct card_conf info = {0};
+	int i, err;
+
+	err = create_hw_obj(atc->pci, atc->chip_type, atc->model, &hw);
+	if (err) {
+		printk(KERN_ERR "Failed to create hw obj!!!\n");
+		return err;
+	}
+	atc->hw = hw;
+
+	/* Initialize card hardware. */
+	info.rsr = atc->rsr;
+	info.msr = atc->msr;
+	info.vm_pgt_phys = atc_get_ptp_phys(atc, 0);
+	err = hw->card_init(hw, &info);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < NUM_RSCTYP; i++) {
+		if (NULL == rsc_mgr_funcs[i].create)
+			continue;
+
+		err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]);
+		if (err) {
+			printk(KERN_ERR "ctxfi: "
+			       "Failed to create rsc_mgr %d!!!\n", i);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit atc_get_resources(struct ct_atc *atc)
+{
+	struct daio_desc da_desc = {0};
+	struct daio_mgr *daio_mgr;
+	struct src_desc src_dsc = {0};
+	struct src_mgr *src_mgr;
+	struct srcimp_desc srcimp_dsc = {0};
+	struct srcimp_mgr *srcimp_mgr;
+	struct sum_desc sum_dsc = {0};
+	struct sum_mgr *sum_mgr;
+	int err, i;
+
+	atc->daios = kzalloc(sizeof(void *)*(DAIONUM), GFP_KERNEL);
+	if (NULL == atc->daios)
+		return -ENOMEM;
+
+	atc->srcs = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
+	if (NULL == atc->srcs)
+		return -ENOMEM;
+
+	atc->srcimps = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
+	if (NULL == atc->srcimps)
+		return -ENOMEM;
+
+	atc->pcm = kzalloc(sizeof(void *)*(2*4), GFP_KERNEL);
+	if (NULL == atc->pcm)
+		return -ENOMEM;
+
+	daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
+	da_desc.msr = atc->msr;
+	for (i = 0, atc->n_daio = 0; i < DAIONUM-1; i++) {
+		da_desc.type = i;
+		err = daio_mgr->get_daio(daio_mgr, &da_desc,
+					(struct daio **)&atc->daios[i]);
+		if (err) {
+			printk(KERN_ERR "ctxfi: Failed to get DAIO "
+					"resource %d!!!\n", i);
+			return err;
+		}
+		atc->n_daio++;
+	}
+	if (atc->model == CTSB073X)
+		da_desc.type = SPDIFI1;
+	else
+		da_desc.type = SPDIFIO;
+	err = daio_mgr->get_daio(daio_mgr, &da_desc,
+				(struct daio **)&atc->daios[i]);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to get S/PDIF-in resource!!!\n");
+		return err;
+	}
+	atc->n_daio++;
+
+	src_mgr = atc->rsc_mgrs[SRC];
+	src_dsc.multi = 1;
+	src_dsc.msr = atc->msr;
+	src_dsc.mode = ARCRW;
+	for (i = 0, atc->n_src = 0; i < (2*2); i++) {
+		err = src_mgr->get_src(src_mgr, &src_dsc,
+					(struct src **)&atc->srcs[i]);
+		if (err)
+			return err;
+
+		atc->n_src++;
+	}
+
+	srcimp_mgr = atc->rsc_mgrs[SRCIMP];
+	srcimp_dsc.msr = 8; /* SRCIMPs for S/PDIFIn SRT */
+	for (i = 0, atc->n_srcimp = 0; i < (2*1); i++) {
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc,
+					(struct srcimp **)&atc->srcimps[i]);
+		if (err)
+			return err;
+
+		atc->n_srcimp++;
+	}
+	srcimp_dsc.msr = 8; /* SRCIMPs for LINE/MICIn SRT */
+	for (i = 0; i < (2*1); i++) {
+		err = srcimp_mgr->get_srcimp(srcimp_mgr, &srcimp_dsc,
+				(struct srcimp **)&atc->srcimps[2*1+i]);
+		if (err)
+			return err;
+
+		atc->n_srcimp++;
+	}
+
+	sum_mgr = atc->rsc_mgrs[SUM];
+	sum_dsc.msr = atc->msr;
+	for (i = 0, atc->n_pcm = 0; i < (2*4); i++) {
+		err = sum_mgr->get_sum(sum_mgr, &sum_dsc,
+					(struct sum **)&atc->pcm[i]);
+		if (err)
+			return err;
+
+		atc->n_pcm++;
+	}
+
+	err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static void __devinit
+atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai,
+		struct src **srcs, struct srcimp **srcimps)
+{
+	struct rsc *rscs[2] = {NULL};
+	struct src *src;
+	struct srcimp *srcimp;
+	int i = 0;
+
+	rscs[0] = &dai->daio.rscl;
+	rscs[1] = &dai->daio.rscr;
+	for (i = 0; i < 2; i++) {
+		src = srcs[i];
+		srcimp = srcimps[i];
+		srcimp->ops->map(srcimp, src, rscs[i]);
+		src_mgr->src_disable(src_mgr, src);
+	}
+
+	src_mgr->commit_write(src_mgr); /* Actually disable SRCs */
+
+	src = srcs[0];
+	src->ops->set_pm(src, 1);
+	for (i = 0; i < 2; i++) {
+		src = srcs[i];
+		src->ops->set_state(src, SRC_STATE_RUN);
+		src->ops->commit_write(src);
+		src_mgr->src_enable_s(src_mgr, src);
+	}
+
+	dai->ops->set_srt_srcl(dai, &(srcs[0]->rsc));
+	dai->ops->set_srt_srcr(dai, &(srcs[1]->rsc));
+
+	dai->ops->set_enb_src(dai, 1);
+	dai->ops->set_enb_srt(dai, 1);
+	dai->ops->commit_write(dai);
+
+	src_mgr->commit_write(src_mgr); /* Synchronously enable SRCs */
+}
+
+static void __devinit atc_connect_resources(struct ct_atc *atc)
+{
+	struct dai *dai;
+	struct dao *dao;
+	struct src *src;
+	struct sum *sum;
+	struct ct_mixer *mixer;
+	struct rsc *rscs[2] = {NULL};
+	int i, j;
+
+	mixer = atc->mixer;
+
+	for (i = MIX_WAVE_FRONT, j = LINEO1; i <= MIX_SPDIF_OUT; i++, j++) {
+		mixer->get_output_ports(mixer, i, &rscs[0], &rscs[1]);
+		dao = container_of(atc->daios[j], struct dao, daio);
+		dao->ops->set_left_input(dao, rscs[0]);
+		dao->ops->set_right_input(dao, rscs[1]);
+	}
+
+	dai = container_of(atc->daios[LINEIM], struct dai, daio);
+	atc_connect_dai(atc->rsc_mgrs[SRC], dai,
+			(struct src **)&atc->srcs[2],
+			(struct srcimp **)&atc->srcimps[2]);
+	src = atc->srcs[2];
+	mixer->set_input_left(mixer, MIX_LINE_IN, &src->rsc);
+	src = atc->srcs[3];
+	mixer->set_input_right(mixer, MIX_LINE_IN, &src->rsc);
+
+	dai = container_of(atc->daios[SPDIFIO], struct dai, daio);
+	atc_connect_dai(atc->rsc_mgrs[SRC], dai,
+			(struct src **)&atc->srcs[0],
+			(struct srcimp **)&atc->srcimps[0]);
+
+	src = atc->srcs[0];
+	mixer->set_input_left(mixer, MIX_SPDIF_IN, &src->rsc);
+	src = atc->srcs[1];
+	mixer->set_input_right(mixer, MIX_SPDIF_IN, &src->rsc);
+
+	for (i = MIX_PCMI_FRONT, j = 0; i <= MIX_PCMI_SURROUND; i++, j += 2) {
+		sum = atc->pcm[j];
+		mixer->set_input_left(mixer, i, &sum->rsc);
+		sum = atc->pcm[j+1];
+		mixer->set_input_right(mixer, i, &sum->rsc);
+	}
+}
+
+static struct ct_atc atc_preset __devinitdata = {
+	.map_audio_buffer = ct_map_audio_buffer,
+	.unmap_audio_buffer = ct_unmap_audio_buffer,
+	.pcm_playback_prepare = atc_pcm_playback_prepare,
+	.pcm_release_resources = atc_pcm_release_resources,
+	.pcm_playback_start = atc_pcm_playback_start,
+	.pcm_playback_stop = atc_pcm_stop,
+	.pcm_playback_position = atc_pcm_playback_position,
+	.pcm_capture_prepare = atc_pcm_capture_prepare,
+	.pcm_capture_start = atc_pcm_capture_start,
+	.pcm_capture_stop = atc_pcm_stop,
+	.pcm_capture_position = atc_pcm_capture_position,
+	.spdif_passthru_playback_prepare = spdif_passthru_playback_prepare,
+	.get_ptp_phys = atc_get_ptp_phys,
+	.select_line_in = atc_select_line_in,
+	.select_mic_in = atc_select_mic_in,
+	.select_digit_io = atc_select_digit_io,
+	.line_front_unmute = atc_line_front_unmute,
+	.line_surround_unmute = atc_line_surround_unmute,
+	.line_clfe_unmute = atc_line_clfe_unmute,
+	.line_rear_unmute = atc_line_rear_unmute,
+	.line_in_unmute = atc_line_in_unmute,
+	.spdif_out_unmute = atc_spdif_out_unmute,
+	.spdif_in_unmute = atc_spdif_in_unmute,
+	.spdif_out_get_status = atc_spdif_out_get_status,
+	.spdif_out_set_status = atc_spdif_out_set_status,
+	.spdif_out_passthru = atc_spdif_out_passthru,
+	.have_digit_io_switch = atc_have_digit_io_switch,
+};
+
+/**
+ *  ct_atc_create - create and initialize a hardware manager
+ *  @card: corresponding alsa card object
+ *  @pci: corresponding kernel pci device object
+ *  @ratc: return created object address in it
+ *
+ *  Creates and initializes a hardware manager.
+ *
+ *  Creates kmallocated ct_atc structure. Initializes hardware.
+ *  Returns 0 if suceeds, or negative error code if fails.
+ */
+
+int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
+			    unsigned int rsr, unsigned int msr,
+			    int chip_type, struct ct_atc **ratc)
+{
+	struct ct_atc *atc;
+	static struct snd_device_ops ops = {
+		.dev_free = atc_dev_free,
+	};
+	int err;
+
+	*ratc = NULL;
+
+	atc = kzalloc(sizeof(*atc), GFP_KERNEL);
+	if (NULL == atc)
+		return -ENOMEM;
+
+	/* Set operations */
+	*atc = atc_preset;
+
+	atc->card = card;
+	atc->pci = pci;
+	atc->rsr = rsr;
+	atc->msr = msr;
+	atc->chip_type = chip_type;
+
+	spin_lock_init(&atc->atc_lock);
+
+	/* Find card model */
+	err = atc_identify_card(atc);
+	if (err < 0) {
+		printk(KERN_ERR "ctatc: Card not recognised\n");
+		goto error1;
+	}
+
+	/* Set up device virtual memory management object */
+	err = ct_vm_create(&atc->vm);
+	if (err < 0)
+		goto error1;
+
+	/* Create all atc hw devices */
+	err = atc_create_hw_devs(atc);
+	if (err < 0)
+		goto error1;
+
+	/* Get resources */
+	err = atc_get_resources(atc);
+	if (err < 0)
+		goto error1;
+
+	/* Build topology */
+	atc_connect_resources(atc);
+
+	atc->timer = ct_timer_new(atc);
+	if (!atc->timer)
+		goto error1;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, atc, &ops);
+	if (err < 0)
+		goto error1;
+
+	snd_card_set_dev(card, &pci->dev);
+
+	*ratc = atc;
+	return 0;
+
+error1:
+	ct_atc_destroy(atc);
+	printk(KERN_ERR "ctxfi: Something wrong!!!\n");
+	return err;
+}
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
new file mode 100644
index 00000000000..a03347232e8
--- /dev/null
+++ b/sound/pci/ctxfi/ctatc.h
@@ -0,0 +1,147 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctatc.h
+ *
+ * @Brief
+ * This file contains the definition of the device resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTATC_H
+#define CTATC_H
+
+#include <linux/types.h>
+#include <linux/spinlock_types.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <sound/core.h>
+
+#include "ctvmem.h"
+#include "ctresource.h"
+
+enum CTALSADEVS {		/* Types of alsa devices */
+	FRONT,
+	SURROUND,
+	CLFE,
+	SIDE,
+	IEC958,
+	MIXER,
+	NUM_CTALSADEVS		/* This should always be the last */
+};
+
+struct ct_atc_chip_sub_details {
+	u16 subsys;
+	const char *nm_model;
+};
+
+struct ct_atc_chip_details {
+	u16 vendor;
+	u16 device;
+	const struct ct_atc_chip_sub_details *sub_details;
+	const char *nm_card;
+};
+
+struct ct_atc;
+struct ct_timer;
+struct ct_timer_instance;
+
+/* alsa pcm stream descriptor */
+struct ct_atc_pcm {
+	struct snd_pcm_substream *substream;
+	void (*interrupt)(struct ct_atc_pcm *apcm);
+	struct ct_timer_instance *timer;
+	unsigned int started:1;
+
+	/* Only mono and interleaved modes are supported now. */
+	struct ct_vm_block *vm_block;
+	void *src;		/* SRC for interacting with host memory */
+	void **srccs;		/* SRCs for sample rate conversion */
+	void **srcimps;		/* SRC Input Mappers */
+	void **amixers;		/* AMIXERs for routing converted data */
+	void *mono;		/* A SUM resource for mixing chs to one */
+	unsigned char n_srcc;	/* Number of converting SRCs */
+	unsigned char n_srcimp;	/* Number of SRC Input Mappers */
+	unsigned char n_amixer;	/* Number of AMIXERs */
+};
+
+/* Chip resource management object */
+struct ct_atc {
+	struct pci_dev *pci;
+	struct snd_card *card;
+	unsigned int rsr; /* reference sample rate in Hz */
+	unsigned int msr; /* master sample rate in rsr */
+	unsigned int pll_rate; /* current rate of Phase Lock Loop */
+
+	int chip_type;
+	int model;
+	const char *chip_name;
+	const char *model_name;
+
+	struct ct_vm *vm; /* device virtual memory manager for this card */
+	int (*map_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	void (*unmap_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	unsigned long (*get_ptp_phys)(struct ct_atc *atc, int index);
+
+	spinlock_t atc_lock;
+
+	int (*pcm_playback_prepare)(struct ct_atc *atc,
+				    struct ct_atc_pcm *apcm);
+	int (*pcm_playback_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_playback_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_playback_position)(struct ct_atc *atc,
+				     struct ct_atc_pcm *apcm);
+	int (*spdif_passthru_playback_prepare)(struct ct_atc *atc,
+					       struct ct_atc_pcm *apcm);
+	int (*pcm_capture_prepare)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_start)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_stop)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
+	int (*pcm_capture_position)(struct ct_atc *atc,
+				    struct ct_atc_pcm *apcm);
+	int (*pcm_release_resources)(struct ct_atc *atc,
+				     struct ct_atc_pcm *apcm);
+	int (*select_line_in)(struct ct_atc *atc);
+	int (*select_mic_in)(struct ct_atc *atc);
+	int (*select_digit_io)(struct ct_atc *atc);
+	int (*line_front_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_surround_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_clfe_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_rear_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*line_in_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_out_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_in_unmute)(struct ct_atc *atc, unsigned char state);
+	int (*spdif_out_get_status)(struct ct_atc *atc, unsigned int *status);
+	int (*spdif_out_set_status)(struct ct_atc *atc, unsigned int status);
+	int (*spdif_out_passthru)(struct ct_atc *atc, unsigned char state);
+	int (*have_digit_io_switch)(struct ct_atc *atc);
+
+	/* Don't touch! Used for internal object. */
+	void *rsc_mgrs[NUM_RSCTYP]; /* chip resource managers */
+	void *mixer;		/* internal mixer object */
+	void *hw;		/* chip specific hardware access object */
+	void **daios;		/* digital audio io resources */
+	void **pcm;		/* SUMs for collecting all pcm stream */
+	void **srcs;		/* Sample Rate Converters for input signal */
+	void **srcimps;		/* input mappers for SRCs */
+	unsigned char n_daio;
+	unsigned char n_src;
+	unsigned char n_srcimp;
+	unsigned char n_pcm;
+
+	struct ct_timer *timer;
+};
+
+
+int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
+			    unsigned int rsr, unsigned int msr, int chip_type,
+			    struct ct_atc **ratc);
+int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc);
+
+#endif /* CTATC_H */
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
new file mode 100644
index 00000000000..082e35c08c0
--- /dev/null
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -0,0 +1,769 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctdaio.c
+ *
+ * @Brief
+ * This file contains the implementation of Digital Audio Input Output
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#include "ctdaio.h"
+#include "cthardware.h"
+#include "ctimap.h"
+#include <linux/slab.h>
+#include <linux/kernel.h>
+
+#define DAIO_RESOURCE_NUM	NUM_DAIOTYP
+#define DAIO_OUT_MAX		SPDIFOO
+
+union daio_usage {
+	struct {
+		unsigned short lineo1:1;
+		unsigned short lineo2:1;
+		unsigned short lineo3:1;
+		unsigned short lineo4:1;
+		unsigned short spdifoo:1;
+		unsigned short lineim:1;
+		unsigned short spdifio:1;
+		unsigned short spdifi1:1;
+	} bf;
+	unsigned short data;
+};
+
+struct daio_rsc_idx {
+	unsigned short left;
+	unsigned short right;
+};
+
+struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = {
+	[LINEO1] = {.left = 0x00, .right = 0x01},
+	[LINEO2] = {.left = 0x18, .right = 0x19},
+	[LINEO3] = {.left = 0x08, .right = 0x09},
+	[LINEO4] = {.left = 0x10, .right = 0x11},
+	[LINEIM] = {.left = 0x1b5, .right = 0x1bd},
+	[SPDIFOO] = {.left = 0x20, .right = 0x21},
+	[SPDIFIO] = {.left = 0x15, .right = 0x1d},
+	[SPDIFI1] = {.left = 0x95, .right = 0x9d},
+};
+
+struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
+	[LINEO1] = {.left = 0x40, .right = 0x41},
+	[LINEO2] = {.left = 0x70, .right = 0x71},
+	[LINEO3] = {.left = 0x50, .right = 0x51},
+	[LINEO4] = {.left = 0x60, .right = 0x61},
+	[LINEIM] = {.left = 0x45, .right = 0xc5},
+	[SPDIFOO] = {.left = 0x00, .right = 0x01},
+	[SPDIFIO] = {.left = 0x05, .right = 0x85},
+};
+
+static int daio_master(struct rsc *rsc)
+{
+	/* Actually, this is not the resource index of DAIO.
+	 * For DAO, it is the input mapper index. And, for DAI,
+	 * it is the output time-slot index. */
+	return rsc->conj = rsc->idx;
+}
+
+static int daio_index(const struct rsc *rsc)
+{
+	return rsc->conj;
+}
+
+static int daio_out_next_conj(struct rsc *rsc)
+{
+	return rsc->conj += 2;
+}
+
+static int daio_in_next_conj_20k1(struct rsc *rsc)
+{
+	return rsc->conj += 0x200;
+}
+
+static int daio_in_next_conj_20k2(struct rsc *rsc)
+{
+	return rsc->conj += 0x100;
+}
+
+static struct rsc_ops daio_out_rsc_ops = {
+	.master		= daio_master,
+	.next_conj	= daio_out_next_conj,
+	.index		= daio_index,
+	.output_slot	= NULL,
+};
+
+static struct rsc_ops daio_in_rsc_ops_20k1 = {
+	.master		= daio_master,
+	.next_conj	= daio_in_next_conj_20k1,
+	.index		= NULL,
+	.output_slot	= daio_index,
+};
+
+static struct rsc_ops daio_in_rsc_ops_20k2 = {
+	.master		= daio_master,
+	.next_conj	= daio_in_next_conj_20k2,
+	.index		= NULL,
+	.output_slot	= daio_index,
+};
+
+static unsigned int daio_device_index(enum DAIOTYP type, struct hw *hw)
+{
+	switch (hw->chip_type) {
+	case ATC20K1:
+		switch (type) {
+		case SPDIFOO:	return 0;
+		case SPDIFIO:	return 0;
+		case SPDIFI1:	return 1;
+		case LINEO1:	return 4;
+		case LINEO2:	return 7;
+		case LINEO3:	return 5;
+		case LINEO4:	return 6;
+		case LINEIM:	return 7;
+		default:	return -EINVAL;
+		}
+	case ATC20K2:
+		switch (type) {
+		case SPDIFOO:	return 0;
+		case SPDIFIO:	return 0;
+		case LINEO1:	return 4;
+		case LINEO2:	return 7;
+		case LINEO3:	return 5;
+		case LINEO4:	return 6;
+		case LINEIM:	return 4;
+		default:	return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc);
+
+static int dao_spdif_get_spos(struct dao *dao, unsigned int *spos)
+{
+	((struct hw *)dao->hw)->dao_get_spos(dao->ctrl_blk, spos);
+	return 0;
+}
+
+static int dao_spdif_set_spos(struct dao *dao, unsigned int spos)
+{
+	((struct hw *)dao->hw)->dao_set_spos(dao->ctrl_blk, spos);
+	return 0;
+}
+
+static int dao_commit_write(struct dao *dao)
+{
+	((struct hw *)dao->hw)->dao_commit_write(dao->hw,
+		daio_device_index(dao->daio.type, dao->hw), dao->ctrl_blk);
+	return 0;
+}
+
+static int dao_set_left_input(struct dao *dao, struct rsc *input)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	entry = kzalloc((sizeof(*entry) * daio->rscl.msr), GFP_KERNEL);
+	if (NULL == entry)
+		return -ENOMEM;
+
+	/* Program master and conjugate resources */
+	input->ops->master(input);
+	daio->rscl.ops->master(&daio->rscl);
+	for (i = 0; i < daio->rscl.msr; i++, entry++) {
+		entry->slot = input->ops->output_slot(input);
+		entry->user = entry->addr = daio->rscl.ops->index(&daio->rscl);
+		dao->mgr->imap_add(dao->mgr, entry);
+		dao->imappers[i] = entry;
+
+		input->ops->next_conj(input);
+		daio->rscl.ops->next_conj(&daio->rscl);
+	}
+	input->ops->master(input);
+	daio->rscl.ops->master(&daio->rscl);
+
+	return 0;
+}
+
+static int dao_set_right_input(struct dao *dao, struct rsc *input)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	entry = kzalloc((sizeof(*entry) * daio->rscr.msr), GFP_KERNEL);
+	if (NULL == entry)
+		return -ENOMEM;
+
+	/* Program master and conjugate resources */
+	input->ops->master(input);
+	daio->rscr.ops->master(&daio->rscr);
+	for (i = 0; i < daio->rscr.msr; i++, entry++) {
+		entry->slot = input->ops->output_slot(input);
+		entry->user = entry->addr = daio->rscr.ops->index(&daio->rscr);
+		dao->mgr->imap_add(dao->mgr, entry);
+		dao->imappers[daio->rscl.msr + i] = entry;
+
+		input->ops->next_conj(input);
+		daio->rscr.ops->next_conj(&daio->rscr);
+	}
+	input->ops->master(input);
+	daio->rscr.ops->master(&daio->rscr);
+
+	return 0;
+}
+
+static int dao_clear_left_input(struct dao *dao)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	if (NULL == dao->imappers[0])
+		return 0;
+
+	entry = dao->imappers[0];
+	dao->mgr->imap_delete(dao->mgr, entry);
+	/* Program conjugate resources */
+	for (i = 1; i < daio->rscl.msr; i++) {
+		entry = dao->imappers[i];
+		dao->mgr->imap_delete(dao->mgr, entry);
+		dao->imappers[i] = NULL;
+	}
+
+	kfree(dao->imappers[0]);
+	dao->imappers[0] = NULL;
+
+	return 0;
+}
+
+static int dao_clear_right_input(struct dao *dao)
+{
+	struct imapper *entry;
+	struct daio *daio = &dao->daio;
+	int i;
+
+	if (NULL == dao->imappers[daio->rscl.msr])
+		return 0;
+
+	entry = dao->imappers[daio->rscl.msr];
+	dao->mgr->imap_delete(dao->mgr, entry);
+	/* Program conjugate resources */
+	for (i = 1; i < daio->rscr.msr; i++) {
+		entry = dao->imappers[daio->rscl.msr + i];
+		dao->mgr->imap_delete(dao->mgr, entry);
+		dao->imappers[daio->rscl.msr + i] = NULL;
+	}
+
+	kfree(dao->imappers[daio->rscl.msr]);
+	dao->imappers[daio->rscl.msr] = NULL;
+
+	return 0;
+}
+
+static struct dao_rsc_ops dao_ops = {
+	.set_spos		= dao_spdif_set_spos,
+	.commit_write		= dao_commit_write,
+	.get_spos		= dao_spdif_get_spos,
+	.reinit			= dao_rsc_reinit,
+	.set_left_input		= dao_set_left_input,
+	.set_right_input	= dao_set_right_input,
+	.clear_left_input	= dao_clear_left_input,
+	.clear_right_input	= dao_clear_right_input,
+};
+
+static int dai_set_srt_srcl(struct dai *dai, struct rsc *src)
+{
+	src->ops->master(src);
+	((struct hw *)dai->hw)->dai_srt_set_srcm(dai->ctrl_blk,
+						src->ops->index(src));
+	return 0;
+}
+
+static int dai_set_srt_srcr(struct dai *dai, struct rsc *src)
+{
+	src->ops->master(src);
+	((struct hw *)dai->hw)->dai_srt_set_srco(dai->ctrl_blk,
+						src->ops->index(src));
+	return 0;
+}
+
+static int dai_set_srt_msr(struct dai *dai, unsigned int msr)
+{
+	unsigned int rsr;
+
+	for (rsr = 0; msr > 1; msr >>= 1)
+		rsr++;
+
+	((struct hw *)dai->hw)->dai_srt_set_rsr(dai->ctrl_blk, rsr);
+	return 0;
+}
+
+static int dai_set_enb_src(struct dai *dai, unsigned int enb)
+{
+	((struct hw *)dai->hw)->dai_srt_set_ec(dai->ctrl_blk, enb);
+	return 0;
+}
+
+static int dai_set_enb_srt(struct dai *dai, unsigned int enb)
+{
+	((struct hw *)dai->hw)->dai_srt_set_et(dai->ctrl_blk, enb);
+	return 0;
+}
+
+static int dai_commit_write(struct dai *dai)
+{
+	((struct hw *)dai->hw)->dai_commit_write(dai->hw,
+		daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk);
+	return 0;
+}
+
+static struct dai_rsc_ops dai_ops = {
+	.set_srt_srcl		= dai_set_srt_srcl,
+	.set_srt_srcr		= dai_set_srt_srcr,
+	.set_srt_msr		= dai_set_srt_msr,
+	.set_enb_src		= dai_set_enb_src,
+	.set_enb_srt		= dai_set_enb_srt,
+	.commit_write		= dai_commit_write,
+};
+
+static int daio_rsc_init(struct daio *daio,
+			 const struct daio_desc *desc,
+			 void *hw)
+{
+	int err;
+	unsigned int idx_l, idx_r;
+
+	switch (((struct hw *)hw)->chip_type) {
+	case ATC20K1:
+		idx_l = idx_20k1[desc->type].left;
+		idx_r = idx_20k1[desc->type].right;
+		break;
+	case ATC20K2:
+		idx_l = idx_20k2[desc->type].left;
+		idx_r = idx_20k2[desc->type].right;
+		break;
+	default:
+		return -EINVAL;
+	}
+	err = rsc_init(&daio->rscl, idx_l, DAIO, desc->msr, hw);
+	if (err)
+		return err;
+
+	err = rsc_init(&daio->rscr, idx_r, DAIO, desc->msr, hw);
+	if (err)
+		goto error1;
+
+	/* Set daio->rscl/r->ops to daio specific ones */
+	if (desc->type <= DAIO_OUT_MAX) {
+		daio->rscl.ops = daio->rscr.ops = &daio_out_rsc_ops;
+	} else {
+		switch (((struct hw *)hw)->chip_type) {
+		case ATC20K1:
+			daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k1;
+			break;
+		case ATC20K2:
+			daio->rscl.ops = daio->rscr.ops = &daio_in_rsc_ops_20k2;
+			break;
+		default:
+			break;
+		}
+	}
+	daio->type = desc->type;
+
+	return 0;
+
+error1:
+	rsc_uninit(&daio->rscl);
+	return err;
+}
+
+static int daio_rsc_uninit(struct daio *daio)
+{
+	rsc_uninit(&daio->rscl);
+	rsc_uninit(&daio->rscr);
+
+	return 0;
+}
+
+static int dao_rsc_init(struct dao *dao,
+			const struct daio_desc *desc,
+			struct daio_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+	unsigned int conf;
+	int err;
+
+	err = daio_rsc_init(&dao->daio, desc, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	dao->imappers = kzalloc(sizeof(void *)*desc->msr*2, GFP_KERNEL);
+	if (NULL == dao->imappers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	dao->ops = &dao_ops;
+	dao->mgr = mgr;
+	dao->hw = hw;
+	err = hw->dao_get_ctrl_blk(&dao->ctrl_blk);
+	if (err)
+		goto error2;
+
+	hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw));
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	conf = (desc->msr & 0x7) | (desc->passthru << 3);
+	hw->daio_mgr_dao_init(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw), conf);
+	hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk,
+			daio_device_index(dao->daio.type, hw));
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	return 0;
+
+error2:
+	kfree(dao->imappers);
+	dao->imappers = NULL;
+error1:
+	daio_rsc_uninit(&dao->daio);
+	return err;
+}
+
+static int dao_rsc_uninit(struct dao *dao)
+{
+	if (NULL != dao->imappers) {
+		if (NULL != dao->imappers[0])
+			dao_clear_left_input(dao);
+
+		if (NULL != dao->imappers[dao->daio.rscl.msr])
+			dao_clear_right_input(dao);
+
+		kfree(dao->imappers);
+		dao->imappers = NULL;
+	}
+	((struct hw *)dao->hw)->dao_put_ctrl_blk(dao->ctrl_blk);
+	dao->hw = dao->ctrl_blk = NULL;
+	daio_rsc_uninit(&dao->daio);
+
+	return 0;
+}
+
+static int dao_rsc_reinit(struct dao *dao, const struct dao_desc *desc)
+{
+	struct daio_mgr *mgr = dao->mgr;
+	struct daio_desc dsc = {0};
+
+	dsc.type = dao->daio.type;
+	dsc.msr = desc->msr;
+	dsc.passthru = desc->passthru;
+	dao_rsc_uninit(dao);
+	return dao_rsc_init(dao, &dsc, mgr);
+}
+
+static int dai_rsc_init(struct dai *dai,
+			const struct daio_desc *desc,
+			struct daio_mgr *mgr)
+{
+	int err;
+	struct hw *hw = mgr->mgr.hw;
+	unsigned int rsr, msr;
+
+	err = daio_rsc_init(&dai->daio, desc, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	dai->ops = &dai_ops;
+	dai->hw = mgr->mgr.hw;
+	err = hw->dai_get_ctrl_blk(&dai->ctrl_blk);
+	if (err)
+		goto error1;
+
+	for (rsr = 0, msr = desc->msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->dai_srt_set_rsr(dai->ctrl_blk, rsr);
+	hw->dai_srt_set_drat(dai->ctrl_blk, 0);
+	/* default to disabling control of a SRC */
+	hw->dai_srt_set_ec(dai->ctrl_blk, 0);
+	hw->dai_srt_set_et(dai->ctrl_blk, 0); /* default to disabling SRT */
+	hw->dai_commit_write(hw,
+		daio_device_index(dai->daio.type, dai->hw), dai->ctrl_blk);
+
+	return 0;
+
+error1:
+	daio_rsc_uninit(&dai->daio);
+	return err;
+}
+
+static int dai_rsc_uninit(struct dai *dai)
+{
+	((struct hw *)dai->hw)->dai_put_ctrl_blk(dai->ctrl_blk);
+	dai->hw = dai->ctrl_blk = NULL;
+	daio_rsc_uninit(&dai->daio);
+	return 0;
+}
+
+static int daio_mgr_get_rsc(struct rsc_mgr *mgr, enum DAIOTYP type)
+{
+	if (((union daio_usage *)mgr->rscs)->data & (0x1 << type))
+		return -ENOENT;
+
+	((union daio_usage *)mgr->rscs)->data |= (0x1 << type);
+
+	return 0;
+}
+
+static int daio_mgr_put_rsc(struct rsc_mgr *mgr, enum DAIOTYP type)
+{
+	((union daio_usage *)mgr->rscs)->data &= ~(0x1 << type);
+
+	return 0;
+}
+
+static int get_daio_rsc(struct daio_mgr *mgr,
+			const struct daio_desc *desc,
+			struct daio **rdaio)
+{
+	int err;
+	struct dai *dai = NULL;
+	struct dao *dao = NULL;
+	unsigned long flags;
+
+	*rdaio = NULL;
+
+	/* Check whether there are sufficient daio resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	err = daio_mgr_get_rsc(&mgr->mgr, desc->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "Can't meet DAIO resource request!\n");
+		return err;
+	}
+
+	/* Allocate mem for daio resource */
+	if (desc->type <= DAIO_OUT_MAX) {
+		dao = kzalloc(sizeof(*dao), GFP_KERNEL);
+		if (NULL == dao) {
+			err = -ENOMEM;
+			goto error;
+		}
+		err = dao_rsc_init(dao, desc, mgr);
+		if (err)
+			goto error;
+
+		*rdaio = &dao->daio;
+	} else {
+		dai = kzalloc(sizeof(*dai), GFP_KERNEL);
+		if (NULL == dai) {
+			err = -ENOMEM;
+			goto error;
+		}
+		err = dai_rsc_init(dai, desc, mgr);
+		if (err)
+			goto error;
+
+		*rdaio = &dai->daio;
+	}
+
+	mgr->daio_enable(mgr, *rdaio);
+	mgr->commit_write(mgr);
+
+	return 0;
+
+error:
+	if (NULL != dao)
+		kfree(dao);
+	else if (NULL != dai)
+		kfree(dai);
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	daio_mgr_put_rsc(&mgr->mgr, desc->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	return err;
+}
+
+static int put_daio_rsc(struct daio_mgr *mgr, struct daio *daio)
+{
+	unsigned long flags;
+
+	mgr->daio_disable(mgr, daio);
+	mgr->commit_write(mgr);
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	daio_mgr_put_rsc(&mgr->mgr, daio->type);
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+
+	if (daio->type <= DAIO_OUT_MAX) {
+		dao_rsc_uninit(container_of(daio, struct dao, daio));
+		kfree(container_of(daio, struct dao, daio));
+	} else {
+		dai_rsc_uninit(container_of(daio, struct dai, daio));
+		kfree(container_of(daio, struct dai, daio));
+	}
+
+	return 0;
+}
+
+static int daio_mgr_enb_daio(struct daio_mgr *mgr, struct daio *daio)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	if (DAIO_OUT_MAX >= daio->type) {
+		hw->daio_mgr_enb_dao(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	} else {
+		hw->daio_mgr_enb_dai(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_daio(struct daio_mgr *mgr, struct daio *daio)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	if (DAIO_OUT_MAX >= daio->type) {
+		hw->daio_mgr_dsb_dao(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	} else {
+		hw->daio_mgr_dsb_dai(mgr->mgr.ctrl_blk,
+				daio_device_index(daio->type, hw));
+	}
+	return 0;
+}
+
+static int daio_map_op(void *data, struct imapper *entry)
+{
+	struct rsc_mgr *mgr = &((struct daio_mgr *)data)->mgr;
+	struct hw *hw = mgr->hw;
+
+	hw->daio_mgr_set_imaparc(mgr->ctrl_blk, entry->slot);
+	hw->daio_mgr_set_imapnxt(mgr->ctrl_blk, entry->next);
+	hw->daio_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr);
+	hw->daio_mgr_commit_write(mgr->hw, mgr->ctrl_blk);
+
+	return 0;
+}
+
+static int daio_imap_add(struct daio_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	if ((0 == entry->addr) && (mgr->init_imap_added)) {
+		input_mapper_delete(&mgr->imappers, mgr->init_imap,
+							daio_map_op, mgr);
+		mgr->init_imap_added = 0;
+	}
+	err = input_mapper_add(&mgr->imappers, entry, daio_map_op, mgr);
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int daio_imap_delete(struct daio_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	err = input_mapper_delete(&mgr->imappers, entry, daio_map_op, mgr);
+	if (list_empty(&mgr->imappers)) {
+		input_mapper_add(&mgr->imappers, mgr->init_imap,
+							daio_map_op, mgr);
+		mgr->init_imap_added = 1;
+	}
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int daio_mgr_commit_write(struct daio_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	hw->daio_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+	return 0;
+}
+
+int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr)
+{
+	int err, i;
+	struct daio_mgr *daio_mgr;
+	struct imapper *entry;
+
+	*rdaio_mgr = NULL;
+	daio_mgr = kzalloc(sizeof(*daio_mgr), GFP_KERNEL);
+	if (NULL == daio_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&daio_mgr->mgr, DAIO, DAIO_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&daio_mgr->mgr_lock);
+	spin_lock_init(&daio_mgr->imap_lock);
+	INIT_LIST_HEAD(&daio_mgr->imappers);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (NULL == entry) {
+		err = -ENOMEM;
+		goto error2;
+	}
+	entry->slot = entry->addr = entry->next = entry->user = 0;
+	list_add(&entry->list, &daio_mgr->imappers);
+	daio_mgr->init_imap = entry;
+	daio_mgr->init_imap_added = 1;
+
+	daio_mgr->get_daio = get_daio_rsc;
+	daio_mgr->put_daio = put_daio_rsc;
+	daio_mgr->daio_enable = daio_mgr_enb_daio;
+	daio_mgr->daio_disable = daio_mgr_dsb_daio;
+	daio_mgr->imap_add = daio_imap_add;
+	daio_mgr->imap_delete = daio_imap_delete;
+	daio_mgr->commit_write = daio_mgr_commit_write;
+
+	for (i = 0; i < 8; i++) {
+		((struct hw *)hw)->daio_mgr_dsb_dao(daio_mgr->mgr.ctrl_blk, i);
+		((struct hw *)hw)->daio_mgr_dsb_dai(daio_mgr->mgr.ctrl_blk, i);
+	}
+	((struct hw *)hw)->daio_mgr_commit_write(hw, daio_mgr->mgr.ctrl_blk);
+
+	*rdaio_mgr = daio_mgr;
+
+	return 0;
+
+error2:
+	rsc_mgr_uninit(&daio_mgr->mgr);
+error1:
+	kfree(daio_mgr);
+	return err;
+}
+
+int daio_mgr_destroy(struct daio_mgr *daio_mgr)
+{
+	unsigned long flags;
+
+	/* free daio input mapper list */
+	spin_lock_irqsave(&daio_mgr->imap_lock, flags);
+	free_input_mapper_list(&daio_mgr->imappers);
+	spin_unlock_irqrestore(&daio_mgr->imap_lock, flags);
+
+	rsc_mgr_uninit(&daio_mgr->mgr);
+	kfree(daio_mgr);
+
+	return 0;
+}
+
diff --git a/sound/pci/ctxfi/ctdaio.h b/sound/pci/ctxfi/ctdaio.h
new file mode 100644
index 00000000000..0f52ce571ee
--- /dev/null
+++ b/sound/pci/ctxfi/ctdaio.h
@@ -0,0 +1,122 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctdaio.h
+ *
+ * @Brief
+ * This file contains the definition of Digital Audio Input Output
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#ifndef CTDAIO_H
+#define CTDAIO_H
+
+#include "ctresource.h"
+#include "ctimap.h"
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+/* Define the descriptor of a daio resource */
+enum DAIOTYP {
+	LINEO1,
+	LINEO2,
+	LINEO3,
+	LINEO4,
+	SPDIFOO,	/* S/PDIF Out (Flexijack/Optical) */
+	LINEIM,
+	SPDIFIO,	/* S/PDIF In (Flexijack/Optical) on the card */
+	SPDIFI1,	/* S/PDIF In on internal Drive Bay */
+	NUM_DAIOTYP
+};
+
+struct dao_rsc_ops;
+struct dai_rsc_ops;
+struct daio_mgr;
+
+struct daio {
+	struct rsc rscl;	/* Basic resource info for left TX/RX */
+	struct rsc rscr;	/* Basic resource info for right TX/RX */
+	enum DAIOTYP type;
+};
+
+struct dao {
+	struct daio daio;
+	struct dao_rsc_ops *ops;	/* DAO specific operations */
+	struct imapper **imappers;
+	struct daio_mgr *mgr;
+	void *hw;
+	void *ctrl_blk;
+};
+
+struct dai {
+	struct daio daio;
+	struct dai_rsc_ops *ops;	/* DAI specific operations */
+	void *hw;
+	void *ctrl_blk;
+};
+
+struct dao_desc {
+	unsigned int msr:4;
+	unsigned int passthru:1;
+};
+
+struct dao_rsc_ops {
+	int (*set_spos)(struct dao *dao, unsigned int spos);
+	int (*commit_write)(struct dao *dao);
+	int (*get_spos)(struct dao *dao, unsigned int *spos);
+	int (*reinit)(struct dao *dao, const struct dao_desc *desc);
+	int (*set_left_input)(struct dao *dao, struct rsc *input);
+	int (*set_right_input)(struct dao *dao, struct rsc *input);
+	int (*clear_left_input)(struct dao *dao);
+	int (*clear_right_input)(struct dao *dao);
+};
+
+struct dai_rsc_ops {
+	int (*set_srt_srcl)(struct dai *dai, struct rsc *src);
+	int (*set_srt_srcr)(struct dai *dai, struct rsc *src);
+	int (*set_srt_msr)(struct dai *dai, unsigned int msr);
+	int (*set_enb_src)(struct dai *dai, unsigned int enb);
+	int (*set_enb_srt)(struct dai *dai, unsigned int enb);
+	int (*commit_write)(struct dai *dai);
+};
+
+/* Define daio resource request description info */
+struct daio_desc {
+	unsigned int type:4;
+	unsigned int msr:4;
+	unsigned int passthru:1;
+};
+
+struct daio_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+	spinlock_t imap_lock;
+	struct list_head imappers;
+	struct imapper *init_imap;
+	unsigned int init_imap_added;
+
+	 /* request one daio resource */
+	int (*get_daio)(struct daio_mgr *mgr,
+			const struct daio_desc *desc, struct daio **rdaio);
+	/* return one daio resource */
+	int (*put_daio)(struct daio_mgr *mgr, struct daio *daio);
+	int (*daio_enable)(struct daio_mgr *mgr, struct daio *daio);
+	int (*daio_disable)(struct daio_mgr *mgr, struct daio *daio);
+	int (*imap_add)(struct daio_mgr *mgr, struct imapper *entry);
+	int (*imap_delete)(struct daio_mgr *mgr, struct imapper *entry);
+	int (*commit_write)(struct daio_mgr *mgr);
+};
+
+/* Constructor and destructor of daio resource manager */
+int daio_mgr_create(void *hw, struct daio_mgr **rdaio_mgr);
+int daio_mgr_destroy(struct daio_mgr *daio_mgr);
+
+#endif /* CTDAIO_H */
diff --git a/sound/pci/ctxfi/cthardware.c b/sound/pci/ctxfi/cthardware.c
new file mode 100644
index 00000000000..8e64f4862e8
--- /dev/null
+++ b/sound/pci/ctxfi/cthardware.c
@@ -0,0 +1,91 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthardware.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	Jun 26 2008
+ *
+ */
+
+#include "cthardware.h"
+#include "cthw20k1.h"
+#include "cthw20k2.h"
+#include <linux/bug.h>
+
+int __devinit create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type,
+			    enum CTCARDS model, struct hw **rhw)
+{
+	int err;
+
+	switch (chip_type) {
+	case ATC20K1:
+		err = create_20k1_hw_obj(rhw);
+		break;
+	case ATC20K2:
+		err = create_20k2_hw_obj(rhw);
+		break;
+	default:
+		err = -ENODEV;
+		break;
+	}
+	if (err)
+		return err;
+
+	(*rhw)->pci = pci;
+	(*rhw)->chip_type = chip_type;
+	(*rhw)->model = model;
+
+	return 0;
+}
+
+int destroy_hw_obj(struct hw *hw)
+{
+	int err;
+
+	switch (hw->pci->device) {
+	case 0x0005:	/* 20k1 device */
+		err = destroy_20k1_hw_obj(hw);
+		break;
+	case 0x000B:	/* 20k2 device */
+		err = destroy_20k2_hw_obj(hw);
+		break;
+	default:
+		err = -ENODEV;
+		break;
+	}
+
+	return err;
+}
+
+unsigned int get_field(unsigned int data, unsigned int field)
+{
+	int i;
+
+	BUG_ON(!field);
+	/* @field should always be greater than 0 */
+	for (i = 0; !(field & (1 << i)); )
+		i++;
+
+	return (data & field) >> i;
+}
+
+void set_field(unsigned int *data, unsigned int field, unsigned int value)
+{
+	int i;
+
+	BUG_ON(!field);
+	/* @field should always be greater than 0 */
+	for (i = 0; !(field & (1 << i)); )
+		i++;
+
+	*data = (*data & (~field)) | ((value << i) & field);
+}
+
diff --git a/sound/pci/ctxfi/cthardware.h b/sound/pci/ctxfi/cthardware.h
new file mode 100644
index 00000000000..4a8e04f090a
--- /dev/null
+++ b/sound/pci/ctxfi/cthardware.h
@@ -0,0 +1,196 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthardware.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHARDWARE_H
+#define CTHARDWARE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+enum CHIPTYP {
+	ATC20K1,
+	ATC20K2,
+	ATCNONE
+};
+
+enum CTCARDS {
+	/* 20k1 models */
+	CTSB055X,
+	CTSB073X,
+	CTUAA,
+	CT20K1_UNKNOWN,
+	/* 20k2 models */
+	CTSB0760,
+	CTHENDRIX,
+	CTSB0880,
+	NUM_CTCARDS		/* This should always be the last */
+};
+
+/* Type of input source for ADC */
+enum ADCSRC{
+	ADC_MICIN,
+	ADC_LINEIN,
+	ADC_VIDEO,
+	ADC_AUX,
+	ADC_NONE	/* Switch to digital input */
+};
+
+struct card_conf {
+	/* device virtual mem page table page physical addr
+	 * (supporting one page table page now) */
+	unsigned long vm_pgt_phys;
+	unsigned int rsr;	/* reference sample rate in Hzs*/
+	unsigned int msr;	/* master sample rate in rsrs */
+};
+
+struct hw {
+	int (*card_init)(struct hw *hw, struct card_conf *info);
+	int (*card_stop)(struct hw *hw);
+	int (*pll_init)(struct hw *hw, unsigned int rsr);
+	int (*is_adc_source_selected)(struct hw *hw, enum ADCSRC source);
+	int (*select_adc_source)(struct hw *hw, enum ADCSRC source);
+	int (*have_digit_io_switch)(struct hw *hw);
+
+	/* SRC operations */
+	int (*src_rsc_get_ctrl_blk)(void **rblk);
+	int (*src_rsc_put_ctrl_blk)(void *blk);
+	int (*src_set_state)(void *blk, unsigned int state);
+	int (*src_set_bm)(void *blk, unsigned int bm);
+	int (*src_set_rsr)(void *blk, unsigned int rsr);
+	int (*src_set_sf)(void *blk, unsigned int sf);
+	int (*src_set_wr)(void *blk, unsigned int wr);
+	int (*src_set_pm)(void *blk, unsigned int pm);
+	int (*src_set_rom)(void *blk, unsigned int rom);
+	int (*src_set_vo)(void *blk, unsigned int vo);
+	int (*src_set_st)(void *blk, unsigned int st);
+	int (*src_set_ie)(void *blk, unsigned int ie);
+	int (*src_set_ilsz)(void *blk, unsigned int ilsz);
+	int (*src_set_bp)(void *blk, unsigned int bp);
+	int (*src_set_cisz)(void *blk, unsigned int cisz);
+	int (*src_set_ca)(void *blk, unsigned int ca);
+	int (*src_set_sa)(void *blk, unsigned int sa);
+	int (*src_set_la)(void *blk, unsigned int la);
+	int (*src_set_pitch)(void *blk, unsigned int pitch);
+	int (*src_set_clear_zbufs)(void *blk, unsigned int clear);
+	int (*src_set_dirty)(void *blk, unsigned int flags);
+	int (*src_set_dirty_all)(void *blk);
+	int (*src_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*src_get_ca)(struct hw *hw, unsigned int idx, void *blk);
+	unsigned int (*src_get_dirty)(void *blk);
+	unsigned int (*src_dirty_conj_mask)(void);
+	int (*src_mgr_get_ctrl_blk)(void **rblk);
+	int (*src_mgr_put_ctrl_blk)(void *blk);
+	/* syncly enable src @idx */
+	int (*src_mgr_enbs_src)(void *blk, unsigned int idx);
+	/* enable src @idx */
+	int (*src_mgr_enb_src)(void *blk, unsigned int idx);
+	/* disable src @idx */
+	int (*src_mgr_dsb_src)(void *blk, unsigned int idx);
+	int (*src_mgr_commit_write)(struct hw *hw, void *blk);
+
+	/* SRC Input Mapper operations */
+	int (*srcimp_mgr_get_ctrl_blk)(void **rblk);
+	int (*srcimp_mgr_put_ctrl_blk)(void *blk);
+	int (*srcimp_mgr_set_imaparc)(void *blk, unsigned int slot);
+	int (*srcimp_mgr_set_imapuser)(void *blk, unsigned int user);
+	int (*srcimp_mgr_set_imapnxt)(void *blk, unsigned int next);
+	int (*srcimp_mgr_set_imapaddr)(void *blk, unsigned int addr);
+	int (*srcimp_mgr_commit_write)(struct hw *hw, void *blk);
+
+	/* AMIXER operations */
+	int (*amixer_rsc_get_ctrl_blk)(void **rblk);
+	int (*amixer_rsc_put_ctrl_blk)(void *blk);
+	int (*amixer_mgr_get_ctrl_blk)(void **rblk);
+	int (*amixer_mgr_put_ctrl_blk)(void *blk);
+	int (*amixer_set_mode)(void *blk, unsigned int mode);
+	int (*amixer_set_iv)(void *blk, unsigned int iv);
+	int (*amixer_set_x)(void *blk, unsigned int x);
+	int (*amixer_set_y)(void *blk, unsigned int y);
+	int (*amixer_set_sadr)(void *blk, unsigned int sadr);
+	int (*amixer_set_se)(void *blk, unsigned int se);
+	int (*amixer_set_dirty)(void *blk, unsigned int flags);
+	int (*amixer_set_dirty_all)(void *blk);
+	int (*amixer_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*amixer_get_y)(void *blk);
+	unsigned int (*amixer_get_dirty)(void *blk);
+
+	/* DAIO operations */
+	int (*dai_get_ctrl_blk)(void **rblk);
+	int (*dai_put_ctrl_blk)(void *blk);
+	int (*dai_srt_set_srco)(void *blk, unsigned int src);
+	int (*dai_srt_set_srcm)(void *blk, unsigned int src);
+	int (*dai_srt_set_rsr)(void *blk, unsigned int rsr);
+	int (*dai_srt_set_drat)(void *blk, unsigned int drat);
+	int (*dai_srt_set_ec)(void *blk, unsigned int ec);
+	int (*dai_srt_set_et)(void *blk, unsigned int et);
+	int (*dai_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*dao_get_ctrl_blk)(void **rblk);
+	int (*dao_put_ctrl_blk)(void *blk);
+	int (*dao_set_spos)(void *blk, unsigned int spos);
+	int (*dao_commit_write)(struct hw *hw, unsigned int idx, void *blk);
+	int (*dao_get_spos)(void *blk, unsigned int *spos);
+
+	int (*daio_mgr_get_ctrl_blk)(struct hw *hw, void **rblk);
+	int (*daio_mgr_put_ctrl_blk)(void *blk);
+	int (*daio_mgr_enb_dai)(void *blk, unsigned int idx);
+	int (*daio_mgr_dsb_dai)(void *blk, unsigned int idx);
+	int (*daio_mgr_enb_dao)(void *blk, unsigned int idx);
+	int (*daio_mgr_dsb_dao)(void *blk, unsigned int idx);
+	int (*daio_mgr_dao_init)(void *blk, unsigned int idx,
+						unsigned int conf);
+	int (*daio_mgr_set_imaparc)(void *blk, unsigned int slot);
+	int (*daio_mgr_set_imapnxt)(void *blk, unsigned int next);
+	int (*daio_mgr_set_imapaddr)(void *blk, unsigned int addr);
+	int (*daio_mgr_commit_write)(struct hw *hw, void *blk);
+
+	int (*set_timer_irq)(struct hw *hw, int enable);
+	int (*set_timer_tick)(struct hw *hw, unsigned int tick);
+	unsigned int (*get_wc)(struct hw *hw);
+
+	void (*irq_callback)(void *data, unsigned int bit);
+	void *irq_callback_data;
+
+	struct pci_dev *pci;	/* the pci kernel structure of this card */
+	int irq;
+	unsigned long io_base;
+	unsigned long mem_base;
+
+	enum CHIPTYP chip_type;
+	enum CTCARDS model;
+};
+
+int create_hw_obj(struct pci_dev *pci, enum CHIPTYP chip_type,
+		  enum CTCARDS model, struct hw **rhw);
+int destroy_hw_obj(struct hw *hw);
+
+unsigned int get_field(unsigned int data, unsigned int field);
+void set_field(unsigned int *data, unsigned int field, unsigned int value);
+
+/* IRQ bits */
+#define	PLL_INT		(1 << 10) /* PLL input-clock out-of-range */
+#define FI_INT		(1 << 9)  /* forced interrupt */
+#define IT_INT		(1 << 8)  /* timer interrupt */
+#define PCI_INT		(1 << 7)  /* PCI bus error pending */
+#define URT_INT		(1 << 6)  /* UART Tx/Rx */
+#define GPI_INT		(1 << 5)  /* GPI pin */
+#define MIX_INT		(1 << 4)  /* mixer parameter segment FIFO channels */
+#define DAI_INT		(1 << 3)  /* DAI (SR-tracker or SPDIF-receiver) */
+#define TP_INT		(1 << 2)  /* transport priority queue */
+#define DSP_INT		(1 << 1)  /* DSP */
+#define SRC_INT		(1 << 0)  /* SRC channels */
+
+#endif /* CTHARDWARE_H */
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
new file mode 100644
index 00000000000..cb69d9ddfbe
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -0,0 +1,2248 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k1.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord for 20k1.
+ *
+ * @Author	Liu Chun
+ * @Date 	Jun 24 2008
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "cthw20k1.h"
+#include "ct20k1reg.h"
+
+#if BITS_PER_LONG == 32
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
+#else
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
+#endif
+
+struct hw20k1 {
+	struct hw hw;
+	spinlock_t reg_20k1_lock;
+	spinlock_t reg_pci_lock;
+};
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg);
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
+static u32 hw_read_pci(struct hw *hw, u32 reg);
+static void hw_write_pci(struct hw *hw, u32 reg, u32 data);
+
+/*
+ * Type definition block.
+ * The layout of control structures can be directly applied on 20k2 chip.
+ */
+
+/*
+ * SRC control block definitions.
+ */
+
+/* SRC resource control block */
+#define SRCCTL_STATE	0x00000007
+#define SRCCTL_BM	0x00000008
+#define SRCCTL_RSR	0x00000030
+#define SRCCTL_SF	0x000001C0
+#define SRCCTL_WR	0x00000200
+#define SRCCTL_PM	0x00000400
+#define SRCCTL_ROM	0x00001800
+#define SRCCTL_VO	0x00002000
+#define SRCCTL_ST	0x00004000
+#define SRCCTL_IE	0x00008000
+#define SRCCTL_ILSZ	0x000F0000
+#define SRCCTL_BP	0x00100000
+
+#define SRCCCR_CISZ	0x000007FF
+#define SRCCCR_CWA	0x001FF800
+#define SRCCCR_D	0x00200000
+#define SRCCCR_RS	0x01C00000
+#define SRCCCR_NAL	0x3E000000
+#define SRCCCR_RA	0xC0000000
+
+#define SRCCA_CA	0x03FFFFFF
+#define SRCCA_RS	0x1C000000
+#define SRCCA_NAL	0xE0000000
+
+#define SRCSA_SA	0x03FFFFFF
+
+#define SRCLA_LA	0x03FFFFFF
+
+/* Mixer Parameter Ring ram Low and Hight register.
+ * Fixed-point value in 8.24 format for parameter channel */
+#define MPRLH_PITCH	0xFFFFFFFF
+
+/* SRC resource register dirty flags */
+union src_dirty {
+	struct {
+		u16 ctl:1;
+		u16 ccr:1;
+		u16 sa:1;
+		u16 la:1;
+		u16 ca:1;
+		u16 mpr:1;
+		u16 czbfs:1;	/* Clear Z-Buffers */
+		u16 rsv:9;
+	} bf;
+	u16 data;
+};
+
+struct src_rsc_ctrl_blk {
+	unsigned int	ctl;
+	unsigned int 	ccr;
+	unsigned int	ca;
+	unsigned int	sa;
+	unsigned int	la;
+	unsigned int	mpr;
+	union src_dirty	dirty;
+};
+
+/* SRC manager control block */
+union src_mgr_dirty {
+	struct {
+		u16 enb0:1;
+		u16 enb1:1;
+		u16 enb2:1;
+		u16 enb3:1;
+		u16 enb4:1;
+		u16 enb5:1;
+		u16 enb6:1;
+		u16 enb7:1;
+		u16 enbsa:1;
+		u16 rsv:7;
+	} bf;
+	u16 data;
+};
+
+struct src_mgr_ctrl_blk {
+	unsigned int		enbsa;
+	unsigned int		enb[8];
+	union src_mgr_dirty	dirty;
+};
+
+/* SRCIMP manager control block */
+#define SRCAIM_ARC	0x00000FFF
+#define SRCAIM_NXT	0x00FF0000
+#define SRCAIM_SRC	0xFF000000
+
+struct srcimap {
+	unsigned int srcaim;
+	unsigned int idx;
+};
+
+/* SRCIMP manager register dirty flags */
+union srcimp_mgr_dirty {
+	struct {
+		u16 srcimap:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+struct srcimp_mgr_ctrl_blk {
+	struct srcimap		srcimap;
+	union srcimp_mgr_dirty	dirty;
+};
+
+/*
+ * Function implementation block.
+ */
+
+static int src_get_rsc_ctrl_blk(void **rblk)
+{
+	struct src_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_put_rsc_ctrl_blk(void *blk)
+{
+	kfree((struct src_rsc_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int src_set_state(void *blk, unsigned int state)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_STATE, state);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bm(void *blk, unsigned int bm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BM, bm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rsr(void *blk, unsigned int rsr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_RSR, rsr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_sf(void *blk, unsigned int sf)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_SF, sf);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_wr(void *blk, unsigned int wr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_WR, wr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_pm(void *blk, unsigned int pm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_PM, pm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rom(void *blk, unsigned int rom)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ROM, rom);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_vo(void *blk, unsigned int vo)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_VO, vo);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_st(void *blk, unsigned int st)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ST, st);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ie(void *blk, unsigned int ie)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_IE, ie);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ilsz(void *blk, unsigned int ilsz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bp(void *blk, unsigned int bp)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BP, bp);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_cisz(void *blk, unsigned int cisz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ccr, SRCCCR_CISZ, cisz);
+	ctl->dirty.bf.ccr = 1;
+	return 0;
+}
+
+static int src_set_ca(void *blk, unsigned int ca)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ca, SRCCA_CA, ca);
+	ctl->dirty.bf.ca = 1;
+	return 0;
+}
+
+static int src_set_sa(void *blk, unsigned int sa)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->sa, SRCSA_SA, sa);
+	ctl->dirty.bf.sa = 1;
+	return 0;
+}
+
+static int src_set_la(void *blk, unsigned int la)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->la, SRCLA_LA, la);
+	ctl->dirty.bf.la = 1;
+	return 0;
+}
+
+static int src_set_pitch(void *blk, unsigned int pitch)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->mpr, MPRLH_PITCH, pitch);
+	ctl->dirty.bf.mpr = 1;
+	return 0;
+}
+
+static int src_set_clear_zbufs(void *blk, unsigned int clear)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0);
+	return 0;
+}
+
+static int src_set_dirty(void *blk, unsigned int flags)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int src_set_dirty_all(void *blk)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+#define AR_SLOT_SIZE		4096
+#define AR_SLOT_BLOCK_SIZE	16
+#define AR_PTS_PITCH		6
+#define AR_PARAM_SRC_OFFSET	0x60
+
+static unsigned int src_param_pitch_mixer(unsigned int src_idx)
+{
+	return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE
+			- AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE;
+
+}
+
+static int src_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.czbfs) {
+		/* Clear Z-Buffer registers */
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRCUPZ+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 4; i++)
+			hw_write_20kx(hw, SRCDN0Z+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRCDN1Z+idx*0x100+i*0x4, 0);
+
+		ctl->dirty.bf.czbfs = 0;
+	}
+	if (ctl->dirty.bf.mpr) {
+		/* Take the parameter mixer resource in the same group as that
+		 * the idx src is in for simplicity. Unlike src, all conjugate
+		 * parameter mixer resources must be programmed for
+		 * corresponding conjugate src resources. */
+		unsigned int pm_idx = src_param_pitch_mixer(idx);
+		hw_write_20kx(hw, PRING_LO_HI+4*pm_idx, ctl->mpr);
+		hw_write_20kx(hw, PMOPLO+8*pm_idx, 0x3);
+		hw_write_20kx(hw, PMOPHI+8*pm_idx, 0x0);
+		ctl->dirty.bf.mpr = 0;
+	}
+	if (ctl->dirty.bf.sa) {
+		hw_write_20kx(hw, SRCSA+idx*0x100, ctl->sa);
+		ctl->dirty.bf.sa = 0;
+	}
+	if (ctl->dirty.bf.la) {
+		hw_write_20kx(hw, SRCLA+idx*0x100, ctl->la);
+		ctl->dirty.bf.la = 0;
+	}
+	if (ctl->dirty.bf.ca) {
+		hw_write_20kx(hw, SRCCA+idx*0x100, ctl->ca);
+		ctl->dirty.bf.ca = 0;
+	}
+
+	/* Write srccf register */
+	hw_write_20kx(hw, SRCCF+idx*0x100, 0x0);
+
+	if (ctl->dirty.bf.ccr) {
+		hw_write_20kx(hw, SRCCCR+idx*0x100, ctl->ccr);
+		ctl->dirty.bf.ccr = 0;
+	}
+	if (ctl->dirty.bf.ctl) {
+		hw_write_20kx(hw, SRCCTL+idx*0x100, ctl->ctl);
+		ctl->dirty.bf.ctl = 0;
+	}
+
+	return 0;
+}
+
+static int src_get_ca(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	ctl->ca = hw_read_20kx(hw, SRCCA+idx*0x100);
+	ctl->dirty.bf.ca = 0;
+
+	return get_field(ctl->ca, SRCCA_CA);
+}
+
+static unsigned int src_get_dirty(void *blk)
+{
+	return ((struct src_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static unsigned int src_dirty_conj_mask(void)
+{
+	return 0x20;
+}
+
+static int src_mgr_enbs_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enbsa = ~(0x0);
+	((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1;
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	return 0;
+}
+
+static int src_mgr_enb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_dsb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct src_mgr_ctrl_blk *ctl = blk;
+	int i;
+	unsigned int ret;
+
+	if (ctl->dirty.bf.enbsa) {
+		do {
+			ret = hw_read_20kx(hw, SRCENBSTAT);
+		} while (ret & 0x1);
+		hw_write_20kx(hw, SRCENBS, ctl->enbsa);
+		ctl->dirty.bf.enbsa = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.data & (0x1 << i))) {
+			hw_write_20kx(hw, SRCENB+(i*0x100), ctl->enb[i]);
+			ctl->dirty.data &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static int src_mgr_get_ctrl_blk(void **rblk)
+{
+	struct src_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct src_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_get_ctrl_blk(void **rblk)
+{
+	struct srcimp_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int srcimp_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct srcimp_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapuser(void *blk, unsigned int user)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	ctl->srcimap.idx = addr;
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srcimap) {
+		hw_write_20kx(hw, SRCIMAP+ctl->srcimap.idx*0x100,
+						ctl->srcimap.srcaim);
+		ctl->dirty.bf.srcimap = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * AMIXER control block definitions.
+ */
+
+#define AMOPLO_M	0x00000003
+#define AMOPLO_X	0x0003FFF0
+#define AMOPLO_Y	0xFFFC0000
+
+#define AMOPHI_SADR	0x000000FF
+#define AMOPHI_SE	0x80000000
+
+/* AMIXER resource register dirty flags */
+union amixer_dirty {
+	struct {
+		u16 amoplo:1;
+		u16 amophi:1;
+		u16 rsv:14;
+	} bf;
+	u16 data;
+};
+
+/* AMIXER resource control block */
+struct amixer_rsc_ctrl_blk {
+	unsigned int		amoplo;
+	unsigned int		amophi;
+	union amixer_dirty	dirty;
+};
+
+static int amixer_set_mode(void *blk, unsigned int mode)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_M, mode);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_iv(void *blk, unsigned int iv)
+{
+	/* 20k1 amixer does not have this field */
+	return 0;
+}
+
+static int amixer_set_x(void *blk, unsigned int x)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_X, x);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_y(void *blk, unsigned int y)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_Y, y);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_sadr(void *blk, unsigned int sadr)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SADR, sadr);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_se(void *blk, unsigned int se)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SE, se);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_dirty(void *blk, unsigned int flags)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int amixer_set_dirty_all(void *blk)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) {
+		hw_write_20kx(hw, AMOPLO+idx*8, ctl->amoplo);
+		ctl->dirty.bf.amoplo = 0;
+		hw_write_20kx(hw, AMOPHI+idx*8, ctl->amophi);
+		ctl->dirty.bf.amophi = 0;
+	}
+
+	return 0;
+}
+
+static int amixer_get_y(void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	return get_field(ctl->amoplo, AMOPLO_Y);
+}
+
+static unsigned int amixer_get_dirty(void *blk)
+{
+	return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static int amixer_rsc_get_ctrl_blk(void **rblk)
+{
+	struct amixer_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int amixer_rsc_put_ctrl_blk(void *blk)
+{
+	kfree((struct amixer_rsc_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int amixer_mgr_get_ctrl_blk(void **rblk)
+{
+	/*amixer_mgr_ctrl_blk_t *blk;*/
+
+	*rblk = NULL;
+	/*blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;*/
+
+	return 0;
+}
+
+static int amixer_mgr_put_ctrl_blk(void *blk)
+{
+	/*kfree((amixer_mgr_ctrl_blk_t *)blk);*/
+
+	return 0;
+}
+
+/*
+ * DAIO control block definitions.
+ */
+
+/* Receiver Sample Rate Tracker Control register */
+#define SRTCTL_SRCR	0x000000FF
+#define SRTCTL_SRCL	0x0000FF00
+#define SRTCTL_RSR	0x00030000
+#define SRTCTL_DRAT	0x000C0000
+#define SRTCTL_RLE	0x10000000
+#define SRTCTL_RLP	0x20000000
+#define SRTCTL_EC	0x40000000
+#define SRTCTL_ET	0x80000000
+
+/* DAIO Receiver register dirty flags */
+union dai_dirty {
+	struct {
+		u16 srtctl:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* DAIO Receiver control block */
+struct dai_ctrl_blk {
+	unsigned int	srtctl;
+	union dai_dirty	dirty;
+};
+
+/* S/PDIF Transmitter register dirty flags */
+union dao_dirty {
+	struct {
+		u16 spos:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* S/PDIF Transmitter control block */
+struct dao_ctrl_blk {
+	unsigned int 	spos; /* S/PDIF Output Channel Status Register */
+	union dao_dirty	dirty;
+};
+
+/* Audio Input Mapper RAM */
+#define AIM_ARC		0x00000FFF
+#define AIM_NXT		0x007F0000
+
+struct daoimap {
+	unsigned int aim;
+	unsigned int idx;
+};
+
+/* I2S Transmitter/Receiver Control register */
+#define I2SCTL_EA	0x00000004
+#define I2SCTL_EI	0x00000010
+
+/* S/PDIF Transmitter Control register */
+#define SPOCTL_OE	0x00000001
+#define SPOCTL_OS	0x0000000E
+#define SPOCTL_RIV	0x00000010
+#define SPOCTL_LIV	0x00000020
+#define SPOCTL_SR	0x000000C0
+
+/* S/PDIF Receiver Control register */
+#define SPICTL_EN	0x00000001
+#define SPICTL_I24	0x00000002
+#define SPICTL_IB	0x00000004
+#define SPICTL_SM	0x00000008
+#define SPICTL_VM	0x00000010
+
+/* DAIO manager register dirty flags */
+union daio_mgr_dirty {
+	struct {
+		u32 i2soctl:4;
+		u32 i2sictl:4;
+		u32 spoctl:4;
+		u32 spictl:4;
+		u32 daoimap:1;
+		u32 rsv:15;
+	} bf;
+	u32 data;
+};
+
+/* DAIO manager control block */
+struct daio_mgr_ctrl_blk {
+	unsigned int		i2sctl;
+	unsigned int		spoctl;
+	unsigned int		spictl;
+	struct daoimap		daoimap;
+	union daio_mgr_dirty	dirty;
+};
+
+static int dai_srt_set_srcr(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_SRCR, src);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_srcl(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_SRCL, src);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_rsr(void *blk, unsigned int rsr)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_RSR, rsr);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_drat(void *blk, unsigned int drat)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_DRAT, drat);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_ec(void *blk, unsigned int ec)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_EC, ec ? 1 : 0);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_srt_set_et(void *blk, unsigned int et)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srtctl, SRTCTL_ET, et ? 1 : 0);
+	ctl->dirty.bf.srtctl = 1;
+	return 0;
+}
+
+static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srtctl) {
+		if (idx < 4) {
+			/* S/PDIF SRTs */
+			hw_write_20kx(hw, SRTSCTL+0x4*idx, ctl->srtctl);
+		} else {
+			/* I2S SRT */
+			hw_write_20kx(hw, SRTICTL, ctl->srtctl);
+		}
+		ctl->dirty.bf.srtctl = 0;
+	}
+
+	return 0;
+}
+
+static int dai_get_ctrl_blk(void **rblk)
+{
+	struct dai_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dai_put_ctrl_blk(void *blk)
+{
+	kfree((struct dai_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int dao_set_spos(void *blk, unsigned int spos)
+{
+	((struct dao_ctrl_blk *)blk)->spos = spos;
+	((struct dao_ctrl_blk *)blk)->dirty.bf.spos = 1;
+	return 0;
+}
+
+static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dao_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.spos) {
+		if (idx < 4) {
+			/* S/PDIF SPOSx */
+			hw_write_20kx(hw, SPOS+0x4*idx, ctl->spos);
+		}
+		ctl->dirty.bf.spos = 0;
+	}
+
+	return 0;
+}
+
+static int dao_get_spos(void *blk, unsigned int *spos)
+{
+	*spos = ((struct dao_ctrl_blk *)blk)->spos;
+	return 0;
+}
+
+static int dao_get_ctrl_blk(void **rblk)
+{
+	struct dao_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dao_put_ctrl_blk(void *blk)
+{
+	kfree((struct dao_ctrl_blk *)blk);
+
+	return 0;
+}
+
+static int daio_mgr_enb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF input */
+		set_field(&ctl->spictl, SPICTL_EN << (idx*8), 1);
+		ctl->dirty.bf.spictl |= (0x1 << idx);
+	} else {
+		/* I2S input */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 1);
+		ctl->dirty.bf.i2sictl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF input */
+		set_field(&ctl->spictl, SPICTL_EN << (idx*8), 0);
+		ctl->dirty.bf.spictl |= (0x1 << idx);
+	} else {
+		/* I2S input */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EI << (idx*8), 0);
+		ctl->dirty.bf.i2sictl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_enb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 1);
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 1);
+		ctl->dirty.bf.i2soctl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dsb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		set_field(&ctl->spoctl, SPOCTL_OE << (idx*8), 0);
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		idx %= 4;
+		set_field(&ctl->i2sctl, I2SCTL_EA << (idx*8), 0);
+		ctl->dirty.bf.i2soctl |= (0x1 << idx);
+	}
+	return 0;
+}
+
+static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		switch ((conf & 0x7)) {
+		case 0:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 3);
+			break; /* CDIF */
+		case 1:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 0);
+			break;
+		case 2:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 1);
+			break;
+		case 4:
+			set_field(&ctl->spoctl, SPOCTL_SR << (idx*8), 2);
+			break;
+		default:
+			break;
+		}
+		set_field(&ctl->spoctl, SPOCTL_LIV << (idx*8),
+			  (conf >> 4) & 0x1); /* Non-audio */
+		set_field(&ctl->spoctl, SPOCTL_RIV << (idx*8),
+			  (conf >> 4) & 0x1); /* Non-audio */
+		set_field(&ctl->spoctl, SPOCTL_OS << (idx*8),
+			  ((conf >> 3) & 0x1) ? 2 : 2); /* Raw */
+
+		ctl->dirty.bf.spoctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		/*idx %= 4; */
+	}
+	return 0;
+}
+
+static int daio_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_ARC, slot);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_NXT, next);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	ctl->daoimap.idx = addr;
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.i2sictl || ctl->dirty.bf.i2soctl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.i2sictl & (0x1 << i)))
+				ctl->dirty.bf.i2sictl &= ~(0x1 << i);
+
+			if ((ctl->dirty.bf.i2soctl & (0x1 << i)))
+				ctl->dirty.bf.i2soctl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, I2SCTL, ctl->i2sctl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.spoctl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.spoctl & (0x1 << i)))
+				ctl->dirty.bf.spoctl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, SPOCTL, ctl->spoctl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.spictl) {
+		for (i = 0; i < 4; i++) {
+			if ((ctl->dirty.bf.spictl & (0x1 << i)))
+				ctl->dirty.bf.spictl &= ~(0x1 << i);
+		}
+		hw_write_20kx(hw, SPICTL, ctl->spictl);
+		mdelay(1);
+	}
+	if (ctl->dirty.bf.daoimap) {
+		hw_write_20kx(hw, DAOIMAP+ctl->daoimap.idx*4,
+					ctl->daoimap.aim);
+		ctl->dirty.bf.daoimap = 0;
+	}
+
+	return 0;
+}
+
+static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
+{
+	struct daio_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	blk->i2sctl = hw_read_20kx(hw, I2SCTL);
+	blk->spoctl = hw_read_20kx(hw, SPOCTL);
+	blk->spictl = hw_read_20kx(hw, SPICTL);
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int daio_mgr_put_ctrl_blk(void *blk)
+{
+	kfree((struct daio_mgr_ctrl_blk *)blk);
+
+	return 0;
+}
+
+/* Timer interrupt */
+static int set_timer_irq(struct hw *hw, int enable)
+{
+	hw_write_20kx(hw, GIE, enable ? IT_INT : 0);
+	return 0;
+}
+
+static int set_timer_tick(struct hw *hw, unsigned int ticks)
+{
+	if (ticks)
+		ticks |= TIMR_IE | TIMR_IP;
+	hw_write_20kx(hw, TIMR, ticks);
+	return 0;
+}
+
+static unsigned int get_wc(struct hw *hw)
+{
+	return hw_read_20kx(hw, WC);
+}
+
+/* Card hardware initialization block */
+struct dac_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct adc_conf {
+	unsigned int msr; 	/* master sample rate in rsrs */
+	unsigned char input; 	/* the input source of ADC */
+	unsigned char mic20db; 	/* boost mic by 20db if input is microphone */
+};
+
+struct daio_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct trn_conf {
+	unsigned long vm_pgt_phys;
+};
+
+static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
+{
+	u32 i2sorg;
+	u32 spdorg;
+
+	/* Read I2S CTL.  Keep original value. */
+	/*i2sorg = hw_read_20kx(hw, I2SCTL);*/
+	i2sorg = 0x94040404; /* enable all audio out and I2S-D input */
+	/* Program I2S with proper master sample rate and enable
+	 * the correct I2S channel. */
+	i2sorg &= 0xfffffffc;
+
+	/* Enable S/PDIF-out-A in fixed 24-bit data
+	 * format and default to 48kHz. */
+	/* Disable all before doing any changes. */
+	hw_write_20kx(hw, SPOCTL, 0x0);
+	spdorg = 0x05;
+
+	switch (info->msr) {
+	case 1:
+		i2sorg |= 1;
+		spdorg |= (0x0 << 6);
+		break;
+	case 2:
+		i2sorg |= 2;
+		spdorg |= (0x1 << 6);
+		break;
+	case 4:
+		i2sorg |= 3;
+		spdorg |= (0x2 << 6);
+		break;
+	default:
+		i2sorg |= 1;
+		break;
+	}
+
+	hw_write_20kx(hw, I2SCTL, i2sorg);
+	hw_write_20kx(hw, SPOCTL, spdorg);
+
+	/* Enable S/PDIF-in-A in fixed 24-bit data format. */
+	/* Disable all before doing any changes. */
+	hw_write_20kx(hw, SPICTL, 0x0);
+	mdelay(1);
+	spdorg = 0x0a0a0a0a;
+	hw_write_20kx(hw, SPICTL, spdorg);
+	mdelay(1);
+
+	return 0;
+}
+
+/* TRANSPORT operations */
+static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
+{
+	u32 trnctl;
+	u32 ptp_phys_low, ptp_phys_high;
+
+	/* Set up device page table */
+	if ((~0UL) == info->vm_pgt_phys) {
+		printk(KERN_ERR "Wrong device page table page address!\n");
+		return -1;
+	}
+
+	trnctl = 0x13;  /* 32-bit, 4k-size page */
+	ptp_phys_low = (u32)info->vm_pgt_phys;
+	ptp_phys_high = upper_32_bits(info->vm_pgt_phys);
+	if (sizeof(void *) == 8) /* 64bit address */
+		trnctl |= (1 << 2);
+#if 0 /* Only 4k h/w pages for simplicitiy */
+#if PAGE_SIZE == 8192
+	trnctl |= (1<<5);
+#endif
+#endif
+	hw_write_20kx(hw, PTPALX, ptp_phys_low);
+	hw_write_20kx(hw, PTPAHX, ptp_phys_high);
+	hw_write_20kx(hw, TRNCTL, trnctl);
+	hw_write_20kx(hw, TRNIS, 0x200c01); /* realy needed? */
+
+	return 0;
+}
+
+/* Card initialization */
+#define GCTL_EAC	0x00000001
+#define GCTL_EAI	0x00000002
+#define GCTL_BEP	0x00000004
+#define GCTL_BES	0x00000008
+#define GCTL_DSP	0x00000010
+#define GCTL_DBP	0x00000020
+#define GCTL_ABP	0x00000040
+#define GCTL_TBP	0x00000080
+#define GCTL_SBP	0x00000100
+#define GCTL_FBP	0x00000200
+#define GCTL_XA		0x00000400
+#define GCTL_ET		0x00000800
+#define GCTL_PR		0x00001000
+#define GCTL_MRL	0x00002000
+#define GCTL_SDE	0x00004000
+#define GCTL_SDI	0x00008000
+#define GCTL_SM		0x00010000
+#define GCTL_SR		0x00020000
+#define GCTL_SD		0x00040000
+#define GCTL_SE		0x00080000
+#define GCTL_AID	0x00100000
+
+static int hw_pll_init(struct hw *hw, unsigned int rsr)
+{
+	unsigned int pllctl;
+	int i;
+
+	pllctl = (48000 == rsr) ? 0x1480a001 : 0x1480a731;
+	for (i = 0; i < 3; i++) {
+		if (hw_read_20kx(hw, PLLCTL) == pllctl)
+			break;
+
+		hw_write_20kx(hw, PLLCTL, pllctl);
+		mdelay(40);
+	}
+	if (i >= 3) {
+		printk(KERN_ALERT "PLL initialization failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int hw_auto_init(struct hw *hw)
+{
+	unsigned int gctl;
+	int i;
+
+	gctl = hw_read_20kx(hw, GCTL);
+	set_field(&gctl, GCTL_EAI, 0);
+	hw_write_20kx(hw, GCTL, gctl);
+	set_field(&gctl, GCTL_EAI, 1);
+	hw_write_20kx(hw, GCTL, gctl);
+	mdelay(10);
+	for (i = 0; i < 400000; i++) {
+		gctl = hw_read_20kx(hw, GCTL);
+		if (get_field(gctl, GCTL_AID))
+			break;
+	}
+	if (!get_field(gctl, GCTL_AID)) {
+		printk(KERN_ALERT "Card Auto-init failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int i2c_unlock(struct hw *hw)
+{
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	hw_write_pci(hw, 0xcc, 0x8c);
+	hw_write_pci(hw, 0xcc, 0x0e);
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	hw_write_pci(hw, 0xcc, 0xee);
+	hw_write_pci(hw, 0xcc, 0xaa);
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		return 0;
+
+	return -1;
+}
+
+static void i2c_lock(struct hw *hw)
+{
+	if ((hw_read_pci(hw, 0xcc) & 0xff) == 0xaa)
+		hw_write_pci(hw, 0xcc, 0x00);
+}
+
+static void i2c_write(struct hw *hw, u32 device, u32 addr, u32 data)
+{
+	unsigned int ret;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+	hw_write_pci(hw, 0xE0, device);
+	hw_write_pci(hw, 0xE4, (data << 8) | (addr & 0xff));
+}
+
+/* DAC operations */
+
+static int hw_reset_dac(struct hw *hw)
+{
+	u32 i;
+	u16 gpioorg;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+
+	/* To be effective, need to reset the DAC twice. */
+	for (i = 0; i < 2;  i++) {
+		/* set gpio */
+		mdelay(100);
+		gpioorg = (u16)hw_read_20kx(hw, GPIO);
+		gpioorg &= 0xfffd;
+		hw_write_20kx(hw, GPIO, gpioorg);
+		mdelay(1);
+		hw_write_20kx(hw, GPIO, gpioorg | 0x2);
+	}
+
+	i2c_write(hw, 0x00180080, 0x01, 0x80);
+	i2c_write(hw, 0x00180080, 0x02, 0x10);
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
+{
+	u32 data;
+	u16 gpioorg;
+	unsigned int ret;
+
+	if (hw->model == CTSB055X) {
+		/* SB055x, unmute outputs */
+		gpioorg = (u16)hw_read_20kx(hw, GPIO);
+		gpioorg &= 0xffbf;	/* set GPIO6 to low */
+		gpioorg |= 2;		/* set GPIO1 to high */
+		hw_write_20kx(hw, GPIO, gpioorg);
+		return 0;
+	}
+
+	/* mute outputs */
+	gpioorg = (u16)hw_read_20kx(hw, GPIO);
+	gpioorg &= 0xffbf;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	hw_reset_dac(hw);
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000));
+
+	switch (info->msr) {
+	case 1:
+		data = 0x24;
+		break;
+	case 2:
+		data = 0x25;
+		break;
+	case 4:
+		data = 0x26;
+		break;
+	default:
+		data = 0x24;
+		break;
+	}
+
+	i2c_write(hw, 0x00180080, 0x06, data);
+	i2c_write(hw, 0x00180080, 0x09, data);
+	i2c_write(hw, 0x00180080, 0x0c, data);
+	i2c_write(hw, 0x00180080, 0x0f, data);
+
+	i2c_lock(hw);
+
+	/* unmute outputs */
+	gpioorg = (u16)hw_read_20kx(hw, GPIO);
+	gpioorg = gpioorg | 0x40;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	return 0;
+}
+
+/* ADC operations */
+
+static int is_adc_input_selected_SB055x(struct hw *hw, enum ADCSRC type)
+{
+	return 0;
+}
+
+static int is_adc_input_selected_SBx(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data = ((data & (0x1<<7)) && (data & (0x1<<8)));
+		break;
+	case ADC_LINEIN:
+		data = (!(data & (0x1<<7)) && (data & (0x1<<8)));
+		break;
+	case ADC_NONE: /* Digital I/O */
+		data = (!(data & (0x1<<8)));
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int is_adc_input_selected_hendrix(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data = (data & (0x1 << 7)) ? 1 : 0;
+		break;
+	case ADC_LINEIN:
+		data = (data & (0x1 << 7)) ? 0 : 1;
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
+{
+	switch (hw->model) {
+	case CTSB055X:
+		return is_adc_input_selected_SB055x(hw, type);
+	case CTSB073X:
+		return is_adc_input_selected_hendrix(hw, type);
+	case CTUAA:
+		return is_adc_input_selected_hendrix(hw, type);
+	default:
+		return is_adc_input_selected_SBx(hw, type);
+	}
+}
+
+static int
+adc_input_select_SB055x(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+
+	/*
+	 * check and set the following GPIO bits accordingly
+	 * ADC_Gain		= GPIO2
+	 * DRM_off		= GPIO3
+	 * Mic_Pwr_on		= GPIO7
+	 * Digital_IO_Sel	= GPIO8
+	 * Mic_Sw		= GPIO9
+	 * Aux/MicLine_Sw	= GPIO12
+	 */
+	data = hw_read_20kx(hw, GPIO);
+	data &= 0xec73;
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1<<7) | (0x1<<8) | (0x1<<9) ;
+		data |= boost ? (0x1<<2) : 0;
+		break;
+	case ADC_LINEIN:
+		data |= (0x1<<8);
+		break;
+	case ADC_AUX:
+		data |= (0x1<<8) | (0x1<<12);
+		break;
+	case ADC_NONE:
+		data |= (0x1<<12);  /* set to digital */
+		break;
+	default:
+		return -1;
+	}
+
+	hw_write_20kx(hw, GPIO, data);
+
+	return 0;
+}
+
+
+static int
+adc_input_select_SBx(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+	u32 i2c_data;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	/* set i2c access mode as Direct Control */
+	hw_write_pci(hw, 0xEC, 0x05);
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data |= ((0x1 << 7) | (0x1 << 8));
+		i2c_data = 0x1;  /* Mic-in */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 7);
+		data |= (0x1 << 8);
+		i2c_data = 0x2; /* Line-in */
+		break;
+	case ADC_NONE:
+		data &= ~(0x1 << 8);
+		i2c_data = 0x0; /* set to Digital */
+		break;
+	default:
+		i2c_lock(hw);
+		return -1;
+	}
+	hw_write_20kx(hw, GPIO, data);
+	i2c_write(hw, 0x001a0080, 0x2a, i2c_data);
+	if (boost) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */
+	}
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int
+adc_input_select_hendrix(struct hw *hw, enum ADCSRC type, unsigned char boost)
+{
+	u32 data;
+	u32 i2c_data;
+	unsigned int ret;
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	/* set i2c access mode as Direct Control */
+	hw_write_pci(hw, 0xEC, 0x05);
+
+	data = hw_read_20kx(hw, GPIO);
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1 << 7);
+		i2c_data = 0x1;  /* Mic-in */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 7);
+		i2c_data = 0x2; /* Line-in */
+		break;
+	default:
+		i2c_lock(hw);
+		return -1;
+	}
+	hw_write_20kx(hw, GPIO, data);
+	i2c_write(hw, 0x001a0080, 0x2a, i2c_data);
+	if (boost) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xe7); /* +12dB boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xe7); /* +12dB boost */
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf); /* No boost */
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf); /* No boost */
+	}
+
+	i2c_lock(hw);
+
+	return 0;
+}
+
+static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
+{
+	int state = type == ADC_MICIN;
+
+	switch (hw->model) {
+	case CTSB055X:
+		return adc_input_select_SB055x(hw, type, state);
+	case CTSB073X:
+		return adc_input_select_hendrix(hw, type, state);
+	case CTUAA:
+		return adc_input_select_hendrix(hw, type, state);
+	default:
+		return adc_input_select_SBx(hw, type, state);
+	}
+}
+
+static int adc_init_SB055x(struct hw *hw, int input, int mic20db)
+{
+	return adc_input_select_SB055x(hw, input, mic20db);
+}
+
+static int adc_init_SBx(struct hw *hw, int input, int mic20db)
+{
+	u16 gpioorg;
+	u16 input_source;
+	u32 adcdata;
+	unsigned int ret;
+
+	input_source = 0x100;  /* default to analog */
+	switch (input) {
+	case ADC_MICIN:
+		adcdata = 0x1;
+		input_source = 0x180;  /* set GPIO7 to select Mic */
+		break;
+	case ADC_LINEIN:
+		adcdata = 0x2;
+		break;
+	case ADC_VIDEO:
+		adcdata = 0x4;
+		break;
+	case ADC_AUX:
+		adcdata = 0x8;
+		break;
+	case ADC_NONE:
+		adcdata = 0x0;
+		input_source = 0x0;  /* set to Digital */
+		break;
+	default:
+		adcdata = 0x0;
+		break;
+	}
+
+	if (i2c_unlock(hw))
+		return -1;
+
+	do {
+		ret = hw_read_pci(hw, 0xEC);
+	} while (!(ret & 0x800000)); /* i2c ready poll */
+	hw_write_pci(hw, 0xEC, 0x05);  /* write to i2c status control */
+
+	i2c_write(hw, 0x001a0080, 0x0e, 0x08);
+	i2c_write(hw, 0x001a0080, 0x18, 0x0a);
+	i2c_write(hw, 0x001a0080, 0x28, 0x86);
+	i2c_write(hw, 0x001a0080, 0x2a, adcdata);
+
+	if (mic20db) {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xf7);
+		i2c_write(hw, 0x001a0080, 0x1e, 0xf7);
+	} else {
+		i2c_write(hw, 0x001a0080, 0x1c, 0xcf);
+		i2c_write(hw, 0x001a0080, 0x1e, 0xcf);
+	}
+
+	if (!(hw_read_20kx(hw, ID0) & 0x100))
+		i2c_write(hw, 0x001a0080, 0x16, 0x26);
+
+	i2c_lock(hw);
+
+	gpioorg = (u16)hw_read_20kx(hw,  GPIO);
+	gpioorg &= 0xfe7f;
+	gpioorg |= input_source;
+	hw_write_20kx(hw, GPIO, gpioorg);
+
+	return 0;
+}
+
+static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
+{
+	if (hw->model == CTSB055X)
+		return adc_init_SB055x(hw, info->input, info->mic20db);
+	else
+		return adc_init_SBx(hw, info->input, info->mic20db);
+}
+
+static int hw_have_digit_io_switch(struct hw *hw)
+{
+	/* SB073x and Vista compatible cards have no digit IO switch */
+	return !(hw->model == CTSB073X || hw->model == CTUAA);
+}
+
+#define CTLBITS(a, b, c, d)	(((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
+
+#define UAA_CFG_PWRSTATUS	0x44
+#define UAA_CFG_SPACE_FLAG	0xA0
+#define UAA_CORE_CHANGE		0x3FFC
+static int uaa_to_xfi(struct pci_dev *pci)
+{
+	unsigned int bar0, bar1, bar2, bar3, bar4, bar5;
+	unsigned int cmd, irq, cl_size, l_timer, pwr;
+	unsigned int is_uaa;
+	unsigned int data[4] = {0};
+	unsigned int io_base;
+	void *mem_base;
+	int i;
+	const u32 CTLX = CTLBITS('C', 'T', 'L', 'X');
+	const u32 CTL_ = CTLBITS('C', 'T', 'L', '-');
+	const u32 CTLF = CTLBITS('C', 'T', 'L', 'F');
+	const u32 CTLi = CTLBITS('C', 'T', 'L', 'i');
+	const u32 CTLA = CTLBITS('C', 'T', 'L', 'A');
+	const u32 CTLZ = CTLBITS('C', 'T', 'L', 'Z');
+	const u32 CTLL = CTLBITS('C', 'T', 'L', 'L');
+
+	/* By default, Hendrix card UAA Bar0 should be using memory... */
+	io_base = pci_resource_start(pci, 0);
+	mem_base = ioremap(io_base, pci_resource_len(pci, 0));
+	if (NULL == mem_base)
+		return -ENOENT;
+
+	/* Read current mode from Mode Change Register */
+	for (i = 0; i < 4; i++)
+		data[i] = readl(mem_base + UAA_CORE_CHANGE);
+
+	/* Determine current mode... */
+	if (data[0] == CTLA) {
+		is_uaa = ((data[1] == CTLZ && data[2] == CTLL
+			  && data[3] == CTLA) || (data[1] == CTLA
+			  && data[2] == CTLZ && data[3] == CTLL));
+	} else if (data[0] == CTLZ) {
+		is_uaa = (data[1] == CTLL
+				&& data[2] == CTLA && data[3] == CTLA);
+	} else if (data[0] == CTLL) {
+		is_uaa = (data[1] == CTLA
+				&& data[2] == CTLA && data[3] == CTLZ);
+	} else {
+		is_uaa = 0;
+	}
+
+	if (!is_uaa) {
+		/* Not in UAA mode currently. Return directly. */
+		iounmap(mem_base);
+		return 0;
+	}
+
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_0, &bar0);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_1, &bar1);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_2, &bar2);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_3, &bar3);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_4, &bar4);
+	pci_read_config_dword(pci, PCI_BASE_ADDRESS_5, &bar5);
+	pci_read_config_dword(pci, PCI_INTERRUPT_LINE, &irq);
+	pci_read_config_dword(pci, PCI_CACHE_LINE_SIZE, &cl_size);
+	pci_read_config_dword(pci, PCI_LATENCY_TIMER, &l_timer);
+	pci_read_config_dword(pci, UAA_CFG_PWRSTATUS, &pwr);
+	pci_read_config_dword(pci, PCI_COMMAND, &cmd);
+
+	/* Set up X-Fi core PCI configuration space. */
+	/* Switch to X-Fi config space with BAR0 exposed. */
+	pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x87654321);
+	/* Copy UAA's BAR5 into X-Fi BAR0 */
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_0, bar5);
+	/* Switch to X-Fi config space without BAR0 exposed. */
+	pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x12345678);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, bar1);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_2, bar2);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_3, bar3);
+	pci_write_config_dword(pci, PCI_BASE_ADDRESS_4, bar4);
+	pci_write_config_dword(pci, PCI_INTERRUPT_LINE, irq);
+	pci_write_config_dword(pci, PCI_CACHE_LINE_SIZE, cl_size);
+	pci_write_config_dword(pci, PCI_LATENCY_TIMER, l_timer);
+	pci_write_config_dword(pci, UAA_CFG_PWRSTATUS, pwr);
+	pci_write_config_dword(pci, PCI_COMMAND, cmd);
+
+	/* Switch to X-Fi mode */
+	writel(CTLX, (mem_base + UAA_CORE_CHANGE));
+	writel(CTL_, (mem_base + UAA_CORE_CHANGE));
+	writel(CTLF, (mem_base + UAA_CORE_CHANGE));
+	writel(CTLi, (mem_base + UAA_CORE_CHANGE));
+
+	iounmap(mem_base);
+
+	return 0;
+}
+
+static irqreturn_t ct_20k1_interrupt(int irq, void *dev_id)
+{
+	struct hw *hw = dev_id;
+	unsigned int status;
+
+	status = hw_read_20kx(hw, GIP);
+	if (!status)
+		return IRQ_NONE;
+
+	if (hw->irq_callback)
+		hw->irq_callback(hw->irq_callback_data, status);
+
+	hw_write_20kx(hw, GIP, status);
+	return IRQ_HANDLED;
+}
+
+static int hw_card_start(struct hw *hw)
+{
+	int err;
+	struct pci_dev *pci = hw->pci;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	/* Set DMA transfer mask */
+	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
+		printk(KERN_ERR "architecture does not support PCI "
+				"busmaster DMA with mask 0x%llx\n",
+		       CT_XFI_DMA_MASK);
+		err = -ENXIO;
+		goto error1;
+	}
+
+	err = pci_request_regions(pci, "XFi");
+	if (err < 0)
+		goto error1;
+
+	/* Switch to X-Fi mode from UAA mode if neeeded */
+	if (hw->model == CTUAA) {
+		err = uaa_to_xfi(pci);
+		if (err)
+			goto error2;
+
+		hw->io_base = pci_resource_start(pci, 5);
+	} else {
+		hw->io_base = pci_resource_start(pci, 0);
+	}
+
+	err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
+			  "ctxfi", hw);
+	if (err < 0) {
+		printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+		goto error2;
+	}
+	hw->irq = pci->irq;
+
+	pci_set_master(pci);
+
+	return 0;
+
+error2:
+	pci_release_regions(pci);
+	hw->io_base = 0;
+error1:
+	pci_disable_device(pci);
+	return err;
+}
+
+static int hw_card_stop(struct hw *hw)
+{
+	/* TODO: Disable interrupt and so on... */
+	if (hw->irq >= 0)
+		synchronize_irq(hw->irq);
+	return 0;
+}
+
+static int hw_card_shutdown(struct hw *hw)
+{
+	if (hw->irq >= 0)
+		free_irq(hw->irq, hw);
+
+	hw->irq	= -1;
+
+	if (NULL != ((void *)hw->mem_base))
+		iounmap((void *)hw->mem_base);
+
+	hw->mem_base = (unsigned long)NULL;
+
+	if (hw->io_base)
+		pci_release_regions(hw->pci);
+
+	hw->io_base = 0;
+
+	pci_disable_device(hw->pci);
+
+	return 0;
+}
+
+static int hw_card_init(struct hw *hw, struct card_conf *info)
+{
+	int err;
+	unsigned int gctl;
+	u32 data;
+	struct dac_conf dac_info = {0};
+	struct adc_conf adc_info = {0};
+	struct daio_conf daio_info = {0};
+	struct trn_conf trn_info = {0};
+
+	/* Get PCI io port base address and do Hendrix switch if needed. */
+	if (!hw->io_base) {
+		err = hw_card_start(hw);
+		if (err)
+			return err;
+	}
+
+	/* PLL init */
+	err = hw_pll_init(hw, info->rsr);
+	if (err < 0)
+		return err;
+
+	/* kick off auto-init */
+	err = hw_auto_init(hw);
+	if (err < 0)
+		return err;
+
+	/* Enable audio ring */
+	gctl = hw_read_20kx(hw, GCTL);
+	set_field(&gctl, GCTL_EAC, 1);
+	set_field(&gctl, GCTL_DBP, 1);
+	set_field(&gctl, GCTL_TBP, 1);
+	set_field(&gctl, GCTL_FBP, 1);
+	set_field(&gctl, GCTL_ET, 1);
+	hw_write_20kx(hw, GCTL, gctl);
+	mdelay(10);
+
+	/* Reset all global pending interrupts */
+	hw_write_20kx(hw, GIE, 0);
+	/* Reset all SRC pending interrupts */
+	hw_write_20kx(hw, SRCIP, 0);
+	mdelay(30);
+
+	/* Detect the card ID and configure GPIO accordingly. */
+	switch (hw->model) {
+	case CTSB055X:
+		hw_write_20kx(hw, GPIOCTL, 0x13fe);
+		break;
+	case CTSB073X:
+		hw_write_20kx(hw, GPIOCTL, 0x00e6);
+		break;
+	case CTUAA:
+		hw_write_20kx(hw, GPIOCTL, 0x00c2);
+		break;
+	default:
+		hw_write_20kx(hw, GPIOCTL, 0x01e6);
+		break;
+	}
+
+	trn_info.vm_pgt_phys = info->vm_pgt_phys;
+	err = hw_trn_init(hw, &trn_info);
+	if (err < 0)
+		return err;
+
+	daio_info.msr = info->msr;
+	err = hw_daio_init(hw, &daio_info);
+	if (err < 0)
+		return err;
+
+	dac_info.msr = info->msr;
+	err = hw_dac_init(hw, &dac_info);
+	if (err < 0)
+		return err;
+
+	adc_info.msr = info->msr;
+	adc_info.input = ADC_LINEIN;
+	adc_info.mic20db = 0;
+	err = hw_adc_init(hw, &adc_info);
+	if (err < 0)
+		return err;
+
+	data = hw_read_20kx(hw, SRCMCTL);
+	data |= 0x1; /* Enables input from the audio ring */
+	hw_write_20kx(hw, SRCMCTL, data);
+
+	return 0;
+}
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg)
+{
+	u32 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+	outl(reg, hw->io_base + 0x0);
+	value = inl(hw->io_base + 0x4);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+
+	return value;
+}
+
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+	outl(reg, hw->io_base + 0x0);
+	outl(data, hw->io_base + 0x4);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_20k1_lock, flags);
+
+}
+
+static u32 hw_read_pci(struct hw *hw, u32 reg)
+{
+	u32 value;
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+	outl(reg, hw->io_base + 0x10);
+	value = inl(hw->io_base + 0x14);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+
+	return value;
+}
+
+static void hw_write_pci(struct hw *hw, u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+	outl(reg, hw->io_base + 0x10);
+	outl(data, hw->io_base + 0x14);
+	spin_unlock_irqrestore(
+		&container_of(hw, struct hw20k1, hw)->reg_pci_lock, flags);
+}
+
+static struct hw ct20k1_preset __devinitdata = {
+	.irq = -1,
+
+	.card_init = hw_card_init,
+	.card_stop = hw_card_stop,
+	.pll_init = hw_pll_init,
+	.is_adc_source_selected = hw_is_adc_input_selected,
+	.select_adc_source = hw_adc_input_select,
+	.have_digit_io_switch = hw_have_digit_io_switch,
+
+	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
+	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
+	.src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk,
+	.src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk,
+	.src_set_state = src_set_state,
+	.src_set_bm = src_set_bm,
+	.src_set_rsr = src_set_rsr,
+	.src_set_sf = src_set_sf,
+	.src_set_wr = src_set_wr,
+	.src_set_pm = src_set_pm,
+	.src_set_rom = src_set_rom,
+	.src_set_vo = src_set_vo,
+	.src_set_st = src_set_st,
+	.src_set_ie = src_set_ie,
+	.src_set_ilsz = src_set_ilsz,
+	.src_set_bp = src_set_bp,
+	.src_set_cisz = src_set_cisz,
+	.src_set_ca = src_set_ca,
+	.src_set_sa = src_set_sa,
+	.src_set_la = src_set_la,
+	.src_set_pitch = src_set_pitch,
+	.src_set_dirty = src_set_dirty,
+	.src_set_clear_zbufs = src_set_clear_zbufs,
+	.src_set_dirty_all = src_set_dirty_all,
+	.src_commit_write = src_commit_write,
+	.src_get_ca = src_get_ca,
+	.src_get_dirty = src_get_dirty,
+	.src_dirty_conj_mask = src_dirty_conj_mask,
+	.src_mgr_enbs_src = src_mgr_enbs_src,
+	.src_mgr_enb_src = src_mgr_enb_src,
+	.src_mgr_dsb_src = src_mgr_dsb_src,
+	.src_mgr_commit_write = src_mgr_commit_write,
+
+	.srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk,
+	.srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk,
+	.srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc,
+	.srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser,
+	.srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt,
+	.srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr,
+	.srcimp_mgr_commit_write = srcimp_mgr_commit_write,
+
+	.amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk,
+	.amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk,
+	.amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk,
+	.amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk,
+	.amixer_set_mode = amixer_set_mode,
+	.amixer_set_iv = amixer_set_iv,
+	.amixer_set_x = amixer_set_x,
+	.amixer_set_y = amixer_set_y,
+	.amixer_set_sadr = amixer_set_sadr,
+	.amixer_set_se = amixer_set_se,
+	.amixer_set_dirty = amixer_set_dirty,
+	.amixer_set_dirty_all = amixer_set_dirty_all,
+	.amixer_commit_write = amixer_commit_write,
+	.amixer_get_y = amixer_get_y,
+	.amixer_get_dirty = amixer_get_dirty,
+
+	.dai_get_ctrl_blk = dai_get_ctrl_blk,
+	.dai_put_ctrl_blk = dai_put_ctrl_blk,
+	.dai_srt_set_srco = dai_srt_set_srcr,
+	.dai_srt_set_srcm = dai_srt_set_srcl,
+	.dai_srt_set_rsr = dai_srt_set_rsr,
+	.dai_srt_set_drat = dai_srt_set_drat,
+	.dai_srt_set_ec = dai_srt_set_ec,
+	.dai_srt_set_et = dai_srt_set_et,
+	.dai_commit_write = dai_commit_write,
+
+	.dao_get_ctrl_blk = dao_get_ctrl_blk,
+	.dao_put_ctrl_blk = dao_put_ctrl_blk,
+	.dao_set_spos = dao_set_spos,
+	.dao_commit_write = dao_commit_write,
+	.dao_get_spos = dao_get_spos,
+
+	.daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk,
+	.daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk,
+	.daio_mgr_enb_dai = daio_mgr_enb_dai,
+	.daio_mgr_dsb_dai = daio_mgr_dsb_dai,
+	.daio_mgr_enb_dao = daio_mgr_enb_dao,
+	.daio_mgr_dsb_dao = daio_mgr_dsb_dao,
+	.daio_mgr_dao_init = daio_mgr_dao_init,
+	.daio_mgr_set_imaparc = daio_mgr_set_imaparc,
+	.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
+	.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
+	.daio_mgr_commit_write = daio_mgr_commit_write,
+
+	.set_timer_irq = set_timer_irq,
+	.set_timer_tick = set_timer_tick,
+	.get_wc = get_wc,
+};
+
+int __devinit create_20k1_hw_obj(struct hw **rhw)
+{
+	struct hw20k1 *hw20k1;
+
+	*rhw = NULL;
+	hw20k1 = kzalloc(sizeof(*hw20k1), GFP_KERNEL);
+	if (NULL == hw20k1)
+		return -ENOMEM;
+
+	spin_lock_init(&hw20k1->reg_20k1_lock);
+	spin_lock_init(&hw20k1->reg_pci_lock);
+
+	hw20k1->hw = ct20k1_preset;
+
+	*rhw = &hw20k1->hw;
+
+	return 0;
+}
+
+int destroy_20k1_hw_obj(struct hw *hw)
+{
+	if (hw->io_base)
+		hw_card_shutdown(hw);
+
+	kfree(container_of(hw, struct hw20k1, hw));
+	return 0;
+}
diff --git a/sound/pci/ctxfi/cthw20k1.h b/sound/pci/ctxfi/cthw20k1.h
new file mode 100644
index 00000000000..02f72fb448a
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k1.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k1.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHW20K1_H
+#define CTHW20K1_H
+
+#include "cthardware.h"
+
+int create_20k1_hw_obj(struct hw **rhw);
+int destroy_20k1_hw_obj(struct hw *hw);
+
+#endif /* CTHW20K1_H */
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
new file mode 100644
index 00000000000..4493a51c6b0
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -0,0 +1,2137 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k2.c
+ *
+ * @Brief
+ * This file contains the implementation of hardware access methord for 20k2.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 14 2008
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include "cthw20k2.h"
+#include "ct20k2reg.h"
+
+#if BITS_PER_LONG == 32
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
+#else
+#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
+#endif
+
+struct hw20k2 {
+	struct hw hw;
+	/* for i2c */
+	unsigned char dev_id;
+	unsigned char addr_size;
+	unsigned char data_size;
+};
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg);
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data);
+
+/*
+ * Type definition block.
+ * The layout of control structures can be directly applied on 20k2 chip.
+ */
+
+/*
+ * SRC control block definitions.
+ */
+
+/* SRC resource control block */
+#define SRCCTL_STATE	0x00000007
+#define SRCCTL_BM	0x00000008
+#define SRCCTL_RSR	0x00000030
+#define SRCCTL_SF	0x000001C0
+#define SRCCTL_WR	0x00000200
+#define SRCCTL_PM	0x00000400
+#define SRCCTL_ROM	0x00001800
+#define SRCCTL_VO	0x00002000
+#define SRCCTL_ST	0x00004000
+#define SRCCTL_IE	0x00008000
+#define SRCCTL_ILSZ	0x000F0000
+#define SRCCTL_BP	0x00100000
+
+#define SRCCCR_CISZ	0x000007FF
+#define SRCCCR_CWA	0x001FF800
+#define SRCCCR_D	0x00200000
+#define SRCCCR_RS	0x01C00000
+#define SRCCCR_NAL	0x3E000000
+#define SRCCCR_RA	0xC0000000
+
+#define SRCCA_CA	0x0FFFFFFF
+#define SRCCA_RS	0xE0000000
+
+#define SRCSA_SA	0x0FFFFFFF
+
+#define SRCLA_LA	0x0FFFFFFF
+
+/* Mixer Parameter Ring ram Low and Hight register.
+ * Fixed-point value in 8.24 format for parameter channel */
+#define MPRLH_PITCH	0xFFFFFFFF
+
+/* SRC resource register dirty flags */
+union src_dirty {
+	struct {
+		u16 ctl:1;
+		u16 ccr:1;
+		u16 sa:1;
+		u16 la:1;
+		u16 ca:1;
+		u16 mpr:1;
+		u16 czbfs:1;	/* Clear Z-Buffers */
+		u16 rsv:9;
+	} bf;
+	u16 data;
+};
+
+struct src_rsc_ctrl_blk {
+	unsigned int	ctl;
+	unsigned int 	ccr;
+	unsigned int	ca;
+	unsigned int	sa;
+	unsigned int	la;
+	unsigned int	mpr;
+	union src_dirty	dirty;
+};
+
+/* SRC manager control block */
+union src_mgr_dirty {
+	struct {
+		u16 enb0:1;
+		u16 enb1:1;
+		u16 enb2:1;
+		u16 enb3:1;
+		u16 enb4:1;
+		u16 enb5:1;
+		u16 enb6:1;
+		u16 enb7:1;
+		u16 enbsa:1;
+		u16 rsv:7;
+	} bf;
+	u16 data;
+};
+
+struct src_mgr_ctrl_blk {
+	unsigned int		enbsa;
+	unsigned int		enb[8];
+	union src_mgr_dirty	dirty;
+};
+
+/* SRCIMP manager control block */
+#define SRCAIM_ARC	0x00000FFF
+#define SRCAIM_NXT	0x00FF0000
+#define SRCAIM_SRC	0xFF000000
+
+struct srcimap {
+	unsigned int srcaim;
+	unsigned int idx;
+};
+
+/* SRCIMP manager register dirty flags */
+union srcimp_mgr_dirty {
+	struct {
+		u16 srcimap:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+struct srcimp_mgr_ctrl_blk {
+	struct srcimap		srcimap;
+	union srcimp_mgr_dirty	dirty;
+};
+
+/*
+ * Function implementation block.
+ */
+
+static int src_get_rsc_ctrl_blk(void **rblk)
+{
+	struct src_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_put_rsc_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int src_set_state(void *blk, unsigned int state)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_STATE, state);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bm(void *blk, unsigned int bm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BM, bm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rsr(void *blk, unsigned int rsr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_RSR, rsr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_sf(void *blk, unsigned int sf)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_SF, sf);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_wr(void *blk, unsigned int wr)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_WR, wr);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_pm(void *blk, unsigned int pm)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_PM, pm);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_rom(void *blk, unsigned int rom)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ROM, rom);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_vo(void *blk, unsigned int vo)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_VO, vo);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_st(void *blk, unsigned int st)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ST, st);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ie(void *blk, unsigned int ie)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_IE, ie);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_ilsz(void *blk, unsigned int ilsz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_ILSZ, ilsz);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_bp(void *blk, unsigned int bp)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ctl, SRCCTL_BP, bp);
+	ctl->dirty.bf.ctl = 1;
+	return 0;
+}
+
+static int src_set_cisz(void *blk, unsigned int cisz)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ccr, SRCCCR_CISZ, cisz);
+	ctl->dirty.bf.ccr = 1;
+	return 0;
+}
+
+static int src_set_ca(void *blk, unsigned int ca)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->ca, SRCCA_CA, ca);
+	ctl->dirty.bf.ca = 1;
+	return 0;
+}
+
+static int src_set_sa(void *blk, unsigned int sa)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->sa, SRCSA_SA, sa);
+	ctl->dirty.bf.sa = 1;
+	return 0;
+}
+
+static int src_set_la(void *blk, unsigned int la)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->la, SRCLA_LA, la);
+	ctl->dirty.bf.la = 1;
+	return 0;
+}
+
+static int src_set_pitch(void *blk, unsigned int pitch)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->mpr, MPRLH_PITCH, pitch);
+	ctl->dirty.bf.mpr = 1;
+	return 0;
+}
+
+static int src_set_clear_zbufs(void *blk, unsigned int clear)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.bf.czbfs = (clear ? 1 : 0);
+	return 0;
+}
+
+static int src_set_dirty(void *blk, unsigned int flags)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int src_set_dirty_all(void *blk)
+{
+	((struct src_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+#define AR_SLOT_SIZE		4096
+#define AR_SLOT_BLOCK_SIZE	16
+#define AR_PTS_PITCH		6
+#define AR_PARAM_SRC_OFFSET	0x60
+
+static unsigned int src_param_pitch_mixer(unsigned int src_idx)
+{
+	return ((src_idx << 4) + AR_PTS_PITCH + AR_SLOT_SIZE
+			- AR_PARAM_SRC_OFFSET) % AR_SLOT_SIZE;
+
+}
+
+static int src_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+	int i;
+
+	if (ctl->dirty.bf.czbfs) {
+		/* Clear Z-Buffer registers */
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRC_UPZ+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 4; i++)
+			hw_write_20kx(hw, SRC_DN0Z+idx*0x100+i*0x4, 0);
+
+		for (i = 0; i < 8; i++)
+			hw_write_20kx(hw, SRC_DN1Z+idx*0x100+i*0x4, 0);
+
+		ctl->dirty.bf.czbfs = 0;
+	}
+	if (ctl->dirty.bf.mpr) {
+		/* Take the parameter mixer resource in the same group as that
+		 * the idx src is in for simplicity. Unlike src, all conjugate
+		 * parameter mixer resources must be programmed for
+		 * corresponding conjugate src resources. */
+		unsigned int pm_idx = src_param_pitch_mixer(idx);
+		hw_write_20kx(hw, MIXER_PRING_LO_HI+4*pm_idx, ctl->mpr);
+		hw_write_20kx(hw, MIXER_PMOPLO+8*pm_idx, 0x3);
+		hw_write_20kx(hw, MIXER_PMOPHI+8*pm_idx, 0x0);
+		ctl->dirty.bf.mpr = 0;
+	}
+	if (ctl->dirty.bf.sa) {
+		hw_write_20kx(hw, SRC_SA+idx*0x100, ctl->sa);
+		ctl->dirty.bf.sa = 0;
+	}
+	if (ctl->dirty.bf.la) {
+		hw_write_20kx(hw, SRC_LA+idx*0x100, ctl->la);
+		ctl->dirty.bf.la = 0;
+	}
+	if (ctl->dirty.bf.ca) {
+		hw_write_20kx(hw, SRC_CA+idx*0x100, ctl->ca);
+		ctl->dirty.bf.ca = 0;
+	}
+
+	/* Write srccf register */
+	hw_write_20kx(hw, SRC_CF+idx*0x100, 0x0);
+
+	if (ctl->dirty.bf.ccr) {
+		hw_write_20kx(hw, SRC_CCR+idx*0x100, ctl->ccr);
+		ctl->dirty.bf.ccr = 0;
+	}
+	if (ctl->dirty.bf.ctl) {
+		hw_write_20kx(hw, SRC_CTL+idx*0x100, ctl->ctl);
+		ctl->dirty.bf.ctl = 0;
+	}
+
+	return 0;
+}
+
+static int src_get_ca(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct src_rsc_ctrl_blk *ctl = blk;
+
+	ctl->ca = hw_read_20kx(hw, SRC_CA+idx*0x100);
+	ctl->dirty.bf.ca = 0;
+
+	return get_field(ctl->ca, SRCCA_CA);
+}
+
+static unsigned int src_get_dirty(void *blk)
+{
+	return ((struct src_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static unsigned int src_dirty_conj_mask(void)
+{
+	return 0x20;
+}
+
+static int src_mgr_enbs_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enbsa |= (0x1 << ((idx%128)/4));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.bf.enbsa = 1;
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	return 0;
+}
+
+static int src_mgr_enb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] |= (0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_dsb_src(void *blk, unsigned int idx)
+{
+	((struct src_mgr_ctrl_blk *)blk)->enb[idx/32] &= ~(0x1 << (idx%32));
+	((struct src_mgr_ctrl_blk *)blk)->dirty.data |= (0x1 << (idx/32));
+	return 0;
+}
+
+static int src_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct src_mgr_ctrl_blk *ctl = blk;
+	int i;
+	unsigned int ret;
+
+	if (ctl->dirty.bf.enbsa) {
+		do {
+			ret = hw_read_20kx(hw, SRC_ENBSTAT);
+		} while (ret & 0x1);
+		hw_write_20kx(hw, SRC_ENBSA, ctl->enbsa);
+		ctl->dirty.bf.enbsa = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.data & (0x1 << i))) {
+			hw_write_20kx(hw, SRC_ENB+(i*0x100), ctl->enb[i]);
+			ctl->dirty.data &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static int src_mgr_get_ctrl_blk(void **rblk)
+{
+	struct src_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int src_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_get_ctrl_blk(void **rblk)
+{
+	struct srcimp_mgr_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int srcimp_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int srcimp_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_ARC, slot);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapuser(void *blk, unsigned int user)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_SRC, user);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srcimap.srcaim, SRCAIM_NXT, next);
+	ctl->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	((struct srcimp_mgr_ctrl_blk *)blk)->srcimap.idx = addr;
+	((struct srcimp_mgr_ctrl_blk *)blk)->dirty.bf.srcimap = 1;
+	return 0;
+}
+
+static int srcimp_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct srcimp_mgr_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srcimap) {
+		hw_write_20kx(hw, SRC_IMAP+ctl->srcimap.idx*0x100,
+						ctl->srcimap.srcaim);
+		ctl->dirty.bf.srcimap = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * AMIXER control block definitions.
+ */
+
+#define AMOPLO_M	0x00000003
+#define AMOPLO_IV	0x00000004
+#define AMOPLO_X	0x0003FFF0
+#define AMOPLO_Y	0xFFFC0000
+
+#define AMOPHI_SADR	0x000000FF
+#define AMOPHI_SE	0x80000000
+
+/* AMIXER resource register dirty flags */
+union amixer_dirty {
+	struct {
+		u16 amoplo:1;
+		u16 amophi:1;
+		u16 rsv:14;
+	} bf;
+	u16 data;
+};
+
+/* AMIXER resource control block */
+struct amixer_rsc_ctrl_blk {
+	unsigned int		amoplo;
+	unsigned int		amophi;
+	union amixer_dirty	dirty;
+};
+
+static int amixer_set_mode(void *blk, unsigned int mode)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_M, mode);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_iv(void *blk, unsigned int iv)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_IV, iv);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_x(void *blk, unsigned int x)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_X, x);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_y(void *blk, unsigned int y)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amoplo, AMOPLO_Y, y);
+	ctl->dirty.bf.amoplo = 1;
+	return 0;
+}
+
+static int amixer_set_sadr(void *blk, unsigned int sadr)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SADR, sadr);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_se(void *blk, unsigned int se)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->amophi, AMOPHI_SE, se);
+	ctl->dirty.bf.amophi = 1;
+	return 0;
+}
+
+static int amixer_set_dirty(void *blk, unsigned int flags)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = (flags & 0xffff);
+	return 0;
+}
+
+static int amixer_set_dirty_all(void *blk)
+{
+	((struct amixer_rsc_ctrl_blk *)blk)->dirty.data = ~(0x0);
+	return 0;
+}
+
+static int amixer_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.amoplo || ctl->dirty.bf.amophi) {
+		hw_write_20kx(hw, MIXER_AMOPLO+idx*8, ctl->amoplo);
+		ctl->dirty.bf.amoplo = 0;
+		hw_write_20kx(hw, MIXER_AMOPHI+idx*8, ctl->amophi);
+		ctl->dirty.bf.amophi = 0;
+	}
+
+	return 0;
+}
+
+static int amixer_get_y(void *blk)
+{
+	struct amixer_rsc_ctrl_blk *ctl = blk;
+
+	return get_field(ctl->amoplo, AMOPLO_Y);
+}
+
+static unsigned int amixer_get_dirty(void *blk)
+{
+	return ((struct amixer_rsc_ctrl_blk *)blk)->dirty.data;
+}
+
+static int amixer_rsc_get_ctrl_blk(void **rblk)
+{
+	struct amixer_rsc_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int amixer_rsc_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int amixer_mgr_get_ctrl_blk(void **rblk)
+{
+	*rblk = NULL;
+
+	return 0;
+}
+
+static int amixer_mgr_put_ctrl_blk(void *blk)
+{
+	return 0;
+}
+
+/*
+ * DAIO control block definitions.
+ */
+
+/* Receiver Sample Rate Tracker Control register */
+#define SRTCTL_SRCO	0x000000FF
+#define SRTCTL_SRCM	0x0000FF00
+#define SRTCTL_RSR	0x00030000
+#define SRTCTL_DRAT	0x00300000
+#define SRTCTL_EC	0x01000000
+#define SRTCTL_ET	0x10000000
+
+/* DAIO Receiver register dirty flags */
+union dai_dirty {
+	struct {
+		u16 srt:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* DAIO Receiver control block */
+struct dai_ctrl_blk {
+	unsigned int	srt;
+	union dai_dirty	dirty;
+};
+
+/* Audio Input Mapper RAM */
+#define AIM_ARC		0x00000FFF
+#define AIM_NXT		0x007F0000
+
+struct daoimap {
+	unsigned int aim;
+	unsigned int idx;
+};
+
+/* Audio Transmitter Control and Status register */
+#define ATXCTL_EN	0x00000001
+#define ATXCTL_MODE	0x00000010
+#define ATXCTL_CD	0x00000020
+#define ATXCTL_RAW	0x00000100
+#define ATXCTL_MT	0x00000200
+#define ATXCTL_NUC	0x00003000
+#define ATXCTL_BEN	0x00010000
+#define ATXCTL_BMUX	0x00700000
+#define ATXCTL_B24	0x01000000
+#define ATXCTL_CPF	0x02000000
+#define ATXCTL_RIV	0x10000000
+#define ATXCTL_LIV	0x20000000
+#define ATXCTL_RSAT	0x40000000
+#define ATXCTL_LSAT	0x80000000
+
+/* XDIF Transmitter register dirty flags */
+union dao_dirty {
+	struct {
+		u16 atxcsl:1;
+		u16 rsv:15;
+	} bf;
+	u16 data;
+};
+
+/* XDIF Transmitter control block */
+struct dao_ctrl_blk {
+	/* XDIF Transmitter Channel Status Low Register */
+	unsigned int	atxcsl;
+	union dao_dirty	dirty;
+};
+
+/* Audio Receiver Control register */
+#define ARXCTL_EN	0x00000001
+
+/* DAIO manager register dirty flags */
+union daio_mgr_dirty {
+	struct {
+		u32 atxctl:8;
+		u32 arxctl:8;
+		u32 daoimap:1;
+		u32 rsv:15;
+	} bf;
+	u32 data;
+};
+
+/* DAIO manager control block */
+struct daio_mgr_ctrl_blk {
+	struct daoimap		daoimap;
+	unsigned int		txctl[8];
+	unsigned int		rxctl[8];
+	union daio_mgr_dirty	dirty;
+};
+
+static int dai_srt_set_srco(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_SRCO, src);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_srcm(void *blk, unsigned int src)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_SRCM, src);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_rsr(void *blk, unsigned int rsr)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_RSR, rsr);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_drat(void *blk, unsigned int drat)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_DRAT, drat);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_ec(void *blk, unsigned int ec)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_EC, ec ? 1 : 0);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_srt_set_et(void *blk, unsigned int et)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->srt, SRTCTL_ET, et ? 1 : 0);
+	ctl->dirty.bf.srt = 1;
+	return 0;
+}
+
+static int dai_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dai_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.srt) {
+		hw_write_20kx(hw, AUDIO_IO_RX_SRT_CTL+0x40*idx, ctl->srt);
+		ctl->dirty.bf.srt = 0;
+	}
+
+	return 0;
+}
+
+static int dai_get_ctrl_blk(void **rblk)
+{
+	struct dai_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dai_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int dao_set_spos(void *blk, unsigned int spos)
+{
+	((struct dao_ctrl_blk *)blk)->atxcsl = spos;
+	((struct dao_ctrl_blk *)blk)->dirty.bf.atxcsl = 1;
+	return 0;
+}
+
+static int dao_commit_write(struct hw *hw, unsigned int idx, void *blk)
+{
+	struct dao_ctrl_blk *ctl = blk;
+
+	if (ctl->dirty.bf.atxcsl) {
+		if (idx < 4) {
+			/* S/PDIF SPOSx */
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+0x40*idx,
+							ctl->atxcsl);
+		}
+		ctl->dirty.bf.atxcsl = 0;
+	}
+
+	return 0;
+}
+
+static int dao_get_spos(void *blk, unsigned int *spos)
+{
+	*spos = ((struct dao_ctrl_blk *)blk)->atxcsl;
+	return 0;
+}
+
+static int dao_get_ctrl_blk(void **rblk)
+{
+	struct dao_ctrl_blk *blk;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int dao_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+static int daio_mgr_enb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->rxctl[idx], ARXCTL_EN, 1);
+	ctl->dirty.bf.arxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dsb_dai(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->rxctl[idx], ARXCTL_EN, 0);
+
+	ctl->dirty.bf.arxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_enb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->txctl[idx], ATXCTL_EN, 1);
+	ctl->dirty.bf.atxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dsb_dao(void *blk, unsigned int idx)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->txctl[idx], ATXCTL_EN, 0);
+	ctl->dirty.bf.atxctl |= (0x1 << idx);
+	return 0;
+}
+
+static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	if (idx < 4) {
+		/* S/PDIF output */
+		switch ((conf & 0x7)) {
+		case 1:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 0);
+			break;
+		case 2:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 1);
+			break;
+		case 4:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 2);
+			break;
+		case 8:
+			set_field(&ctl->txctl[idx], ATXCTL_NUC, 3);
+			break;
+		default:
+			break;
+		}
+		/* CDIF */
+		set_field(&ctl->txctl[idx], ATXCTL_CD, (!(conf & 0x7)));
+		/* Non-audio */
+		set_field(&ctl->txctl[idx], ATXCTL_LIV, (conf >> 4) & 0x1);
+		/* Non-audio */
+		set_field(&ctl->txctl[idx], ATXCTL_RIV, (conf >> 4) & 0x1);
+		set_field(&ctl->txctl[idx], ATXCTL_RAW,
+			  ((conf >> 3) & 0x1) ? 0 : 0);
+		ctl->dirty.bf.atxctl |= (0x1 << idx);
+	} else {
+		/* I2S output */
+		/*idx %= 4; */
+	}
+	return 0;
+}
+
+static int daio_mgr_set_imaparc(void *blk, unsigned int slot)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_ARC, slot);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapnxt(void *blk, unsigned int next)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+
+	set_field(&ctl->daoimap.aim, AIM_NXT, next);
+	ctl->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_set_imapaddr(void *blk, unsigned int addr)
+{
+	((struct daio_mgr_ctrl_blk *)blk)->daoimap.idx = addr;
+	((struct daio_mgr_ctrl_blk *)blk)->dirty.bf.daoimap = 1;
+	return 0;
+}
+
+static int daio_mgr_commit_write(struct hw *hw, void *blk)
+{
+	struct daio_mgr_ctrl_blk *ctl = blk;
+	unsigned int data;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if ((ctl->dirty.bf.atxctl & (0x1 << i))) {
+			data = ctl->txctl[i];
+			hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
+			ctl->dirty.bf.atxctl &= ~(0x1 << i);
+			mdelay(1);
+		}
+		if ((ctl->dirty.bf.arxctl & (0x1 << i))) {
+			data = ctl->rxctl[i];
+			hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
+			ctl->dirty.bf.arxctl &= ~(0x1 << i);
+			mdelay(1);
+		}
+	}
+	if (ctl->dirty.bf.daoimap) {
+		hw_write_20kx(hw, AUDIO_IO_AIM+ctl->daoimap.idx*4,
+						ctl->daoimap.aim);
+		ctl->dirty.bf.daoimap = 0;
+	}
+
+	return 0;
+}
+
+static int daio_mgr_get_ctrl_blk(struct hw *hw, void **rblk)
+{
+	struct daio_mgr_ctrl_blk *blk;
+	int i;
+
+	*rblk = NULL;
+	blk = kzalloc(sizeof(*blk), GFP_KERNEL);
+	if (NULL == blk)
+		return -ENOMEM;
+
+	for (i = 0; i < 8; i++) {
+		blk->txctl[i] = hw_read_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i));
+		blk->rxctl[i] = hw_read_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i));
+	}
+
+	*rblk = blk;
+
+	return 0;
+}
+
+static int daio_mgr_put_ctrl_blk(void *blk)
+{
+	kfree(blk);
+
+	return 0;
+}
+
+/* Card hardware initialization block */
+struct dac_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct adc_conf {
+	unsigned int msr; 	/* master sample rate in rsrs */
+	unsigned char input; 	/* the input source of ADC */
+	unsigned char mic20db; 	/* boost mic by 20db if input is microphone */
+};
+
+struct daio_conf {
+	unsigned int msr; /* master sample rate in rsrs */
+};
+
+struct trn_conf {
+	unsigned long vm_pgt_phys;
+};
+
+static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
+{
+	u32 data;
+	int i;
+
+	/* Program I2S with proper sample rate and enable the correct I2S
+	 * channel. ED(0/8/16/24): Enable all I2S/I2X master clock output */
+	if (1 == info->msr) {
+		hw_write_20kx(hw, AUDIO_IO_MCLK, 0x01010101);
+		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x01010101);
+		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+	} else if (2 == info->msr) {
+		hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11111111);
+		/* Specify all playing 96khz
+		 * EA [0]	- Enabled
+		 * RTA [4:5]	- 96kHz
+		 * EB [8]	- Enabled
+		 * RTB [12:13]	- 96kHz
+		 * EC [16]	- Enabled
+		 * RTC [20:21]	- 96kHz
+		 * ED [24]	- Enabled
+		 * RTD [28:29]	- 96kHz */
+		hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x11111111);
+		hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+	} else {
+		printk(KERN_ALERT "ctxfi: ERROR!!! Invalid sampling rate!!!\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if (i <= 3) {
+			/* 1st 3 channels are SPDIFs (SB0960) */
+			if (i == 3)
+				data = 0x1001001;
+			else
+				data = 0x1000001;
+
+			hw_write_20kx(hw, (AUDIO_IO_TX_CTL+(0x40*i)), data);
+			hw_write_20kx(hw, (AUDIO_IO_RX_CTL+(0x40*i)), data);
+
+			/* Initialize the SPDIF Out Channel status registers.
+			 * The value specified here is based on the typical
+			 * values provided in the specification, namely: Clock
+			 * Accuracy of 1000ppm, Sample Rate of 48KHz,
+			 * unspecified source number, Generation status = 1,
+			 * Category code = 0x12 (Digital Signal Mixer),
+			 * Mode = 0, Emph = 0, Copy Permitted, AN = 0
+			 * (indicating that we're transmitting digital audio,
+			 * and the Professional Use bit is 0. */
+
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_L+(0x40*i),
+					0x02109204); /* Default to 48kHz */
+
+			hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_H+(0x40*i), 0x0B);
+		} else {
+			/* Next 5 channels are I2S (SB0960) */
+			data = 0x11;
+			hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), data);
+			if (2 == info->msr) {
+				/* Four channels per sample period */
+				data |= 0x1000;
+			}
+			hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), data);
+		}
+	}
+
+	return 0;
+}
+
+/* TRANSPORT operations */
+static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
+{
+	u32 vmctl, data;
+	u32 ptp_phys_low, ptp_phys_high;
+	int i;
+
+	/* Set up device page table */
+	if ((~0UL) == info->vm_pgt_phys) {
+		printk(KERN_ALERT "ctxfi: "
+		       "Wrong device page table page address!!!\n");
+		return -1;
+	}
+
+	vmctl = 0x80000C0F;  /* 32-bit, 4k-size page */
+	ptp_phys_low = (u32)info->vm_pgt_phys;
+	ptp_phys_high = upper_32_bits(info->vm_pgt_phys);
+	if (sizeof(void *) == 8) /* 64bit address */
+		vmctl |= (3 << 8);
+	/* Write page table physical address to all PTPAL registers */
+	for (i = 0; i < 64; i++) {
+		hw_write_20kx(hw, VMEM_PTPAL+(16*i), ptp_phys_low);
+		hw_write_20kx(hw, VMEM_PTPAH+(16*i), ptp_phys_high);
+	}
+	/* Enable virtual memory transfer */
+	hw_write_20kx(hw, VMEM_CTL, vmctl);
+	/* Enable transport bus master and queueing of request */
+	hw_write_20kx(hw, TRANSPORT_CTL, 0x03);
+	hw_write_20kx(hw, TRANSPORT_INT, 0x200c01);
+	/* Enable transport ring */
+	data = hw_read_20kx(hw, TRANSPORT_ENB);
+	hw_write_20kx(hw, TRANSPORT_ENB, (data | 0x03));
+
+	return 0;
+}
+
+/* Card initialization */
+#define GCTL_AIE	0x00000001
+#define GCTL_UAA	0x00000002
+#define GCTL_DPC	0x00000004
+#define GCTL_DBP	0x00000008
+#define GCTL_ABP	0x00000010
+#define GCTL_TBP	0x00000020
+#define GCTL_SBP	0x00000040
+#define GCTL_FBP	0x00000080
+#define GCTL_ME		0x00000100
+#define GCTL_AID	0x00001000
+
+#define PLLCTL_SRC	0x00000007
+#define PLLCTL_SPE	0x00000008
+#define PLLCTL_RD	0x000000F0
+#define PLLCTL_FD	0x0001FF00
+#define PLLCTL_OD	0x00060000
+#define PLLCTL_B	0x00080000
+#define PLLCTL_AS	0x00100000
+#define PLLCTL_LF	0x03E00000
+#define PLLCTL_SPS	0x1C000000
+#define PLLCTL_AD	0x60000000
+
+#define PLLSTAT_CCS	0x00000007
+#define PLLSTAT_SPL	0x00000008
+#define PLLSTAT_CRD	0x000000F0
+#define PLLSTAT_CFD	0x0001FF00
+#define PLLSTAT_SL	0x00020000
+#define PLLSTAT_FAS	0x00040000
+#define PLLSTAT_B	0x00080000
+#define PLLSTAT_PD	0x00100000
+#define PLLSTAT_OCA	0x00200000
+#define PLLSTAT_NCA	0x00400000
+
+static int hw_pll_init(struct hw *hw, unsigned int rsr)
+{
+	unsigned int pllenb;
+	unsigned int pllctl;
+	unsigned int pllstat;
+	int i;
+
+	pllenb = 0xB;
+	hw_write_20kx(hw, PLL_ENB, pllenb);
+	pllctl = 0x20D00000;
+	set_field(&pllctl, PLLCTL_FD, 16 - 4);
+	hw_write_20kx(hw, PLL_CTL, pllctl);
+	mdelay(40);
+	pllctl = hw_read_20kx(hw, PLL_CTL);
+	set_field(&pllctl, PLLCTL_B, 0);
+	if (48000 == rsr) {
+		set_field(&pllctl, PLLCTL_FD, 16 - 2);
+		set_field(&pllctl, PLLCTL_RD, 1 - 1);
+	} else { /* 44100 */
+		set_field(&pllctl, PLLCTL_FD, 147 - 2);
+		set_field(&pllctl, PLLCTL_RD, 10 - 1);
+	}
+	hw_write_20kx(hw, PLL_CTL, pllctl);
+	mdelay(40);
+	for (i = 0; i < 1000; i++) {
+		pllstat = hw_read_20kx(hw, PLL_STAT);
+		if (get_field(pllstat, PLLSTAT_PD))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_B) !=
+					get_field(pllctl, PLLCTL_B))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CCS) !=
+					get_field(pllctl, PLLCTL_SRC))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CRD) !=
+					get_field(pllctl, PLLCTL_RD))
+			continue;
+
+		if (get_field(pllstat, PLLSTAT_CFD) !=
+					get_field(pllctl, PLLCTL_FD))
+			continue;
+
+		break;
+	}
+	if (i >= 1000) {
+		printk(KERN_ALERT "ctxfi: PLL initialization failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int hw_auto_init(struct hw *hw)
+{
+	unsigned int gctl;
+	int i;
+
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_AIE, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+	set_field(&gctl, GCTL_AIE, 1);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+	mdelay(10);
+	for (i = 0; i < 400000; i++) {
+		gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+		if (get_field(gctl, GCTL_AID))
+			break;
+	}
+	if (!get_field(gctl, GCTL_AID)) {
+		printk(KERN_ALERT "ctxfi: Card Auto-init failed!!!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/* DAC operations */
+
+#define CS4382_MC1 		0x1
+#define CS4382_MC2 		0x2
+#define CS4382_MC3		0x3
+#define CS4382_FC		0x4
+#define CS4382_IC		0x5
+#define CS4382_XC1		0x6
+#define CS4382_VCA1 		0x7
+#define CS4382_VCB1 		0x8
+#define CS4382_XC2		0x9
+#define CS4382_VCA2 		0xA
+#define CS4382_VCB2 		0xB
+#define CS4382_XC3		0xC
+#define CS4382_VCA3		0xD
+#define CS4382_VCB3		0xE
+#define CS4382_XC4 		0xF
+#define CS4382_VCA4 		0x10
+#define CS4382_VCB4 		0x11
+#define CS4382_CREV 		0x12
+
+/* I2C status */
+#define STATE_LOCKED		0x00
+#define STATE_UNLOCKED		0xAA
+#define DATA_READY		0x800000    /* Used with I2C_IF_STATUS */
+#define DATA_ABORT		0x10000     /* Used with I2C_IF_STATUS */
+
+#define I2C_STATUS_DCM	0x00000001
+#define I2C_STATUS_BC	0x00000006
+#define I2C_STATUS_APD	0x00000008
+#define I2C_STATUS_AB	0x00010000
+#define I2C_STATUS_DR	0x00800000
+
+#define I2C_ADDRESS_PTAD	0x0000FFFF
+#define I2C_ADDRESS_SLAD	0x007F0000
+
+struct regs_cs4382 {
+	u32 mode_control_1;
+	u32 mode_control_2;
+	u32 mode_control_3;
+
+	u32 filter_control;
+	u32 invert_control;
+
+	u32 mix_control_P1;
+	u32 vol_control_A1;
+	u32 vol_control_B1;
+
+	u32 mix_control_P2;
+	u32 vol_control_A2;
+	u32 vol_control_B2;
+
+	u32 mix_control_P3;
+	u32 vol_control_A3;
+	u32 vol_control_B3;
+
+	u32 mix_control_P4;
+	u32 vol_control_A4;
+	u32 vol_control_B4;
+};
+
+static int hw20k2_i2c_unlock_full_access(struct hw *hw)
+{
+	u8 UnlockKeySequence_FLASH_FULLACCESS_MODE[2] =  {0xB3, 0xD4};
+
+	/* Send keys for forced BIOS mode */
+	hw_write_20kx(hw, I2C_IF_WLOCK,
+			UnlockKeySequence_FLASH_FULLACCESS_MODE[0]);
+	hw_write_20kx(hw, I2C_IF_WLOCK,
+			UnlockKeySequence_FLASH_FULLACCESS_MODE[1]);
+	/* Check whether the chip is unlocked */
+	if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_UNLOCKED)
+		return 0;
+
+	return -1;
+}
+
+static int hw20k2_i2c_lock_chip(struct hw *hw)
+{
+	/* Write twice */
+	hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
+	hw_write_20kx(hw, I2C_IF_WLOCK, STATE_LOCKED);
+	if (hw_read_20kx(hw, I2C_IF_WLOCK) == STATE_LOCKED)
+		return 0;
+
+	return -1;
+}
+
+static int hw20k2_i2c_init(struct hw *hw, u8 dev_id, u8 addr_size, u8 data_size)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	int err;
+	unsigned int i2c_status;
+	unsigned int i2c_addr;
+
+	err = hw20k2_i2c_unlock_full_access(hw);
+	if (err < 0)
+		return err;
+
+	hw20k2->addr_size = addr_size;
+	hw20k2->data_size = data_size;
+	hw20k2->dev_id = dev_id;
+
+	i2c_addr = 0;
+	set_field(&i2c_addr, I2C_ADDRESS_SLAD, dev_id);
+
+	hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_DCM, 1); /* Direct control mode */
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+
+	return 0;
+}
+
+static int hw20k2_i2c_uninit(struct hw *hw)
+{
+	unsigned int i2c_status;
+	unsigned int i2c_addr;
+
+	i2c_addr = 0;
+	set_field(&i2c_addr, I2C_ADDRESS_SLAD, 0x57); /* I2C id */
+
+	hw_write_20kx(hw, I2C_IF_ADDRESS, i2c_addr);
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_DCM, 0); /* I2C mode */
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+
+	return hw20k2_i2c_lock_chip(hw);
+}
+
+static int hw20k2_i2c_wait_data_ready(struct hw *hw)
+{
+	int i = 0x400000;
+	unsigned int ret;
+
+	do {
+		ret = hw_read_20kx(hw, I2C_IF_STATUS);
+	} while ((!(ret & DATA_READY)) && --i);
+
+	return i;
+}
+
+static int hw20k2_i2c_read(struct hw *hw, u16 addr, u32 *datap)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	unsigned int i2c_status;
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+	set_field(&i2c_status, I2C_STATUS_BC,
+		  (4 == hw20k2->addr_size) ? 0 : hw20k2->addr_size);
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	hw_write_20kx(hw, I2C_IF_WDATA, addr);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	/* Force a read operation */
+	hw_write_20kx(hw, I2C_IF_RDATA, 0);
+	if (!hw20k2_i2c_wait_data_ready(hw))
+		return -1;
+
+	*datap = hw_read_20kx(hw, I2C_IF_RDATA);
+
+	return 0;
+}
+
+static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data)
+{
+	struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+	unsigned int i2c_data = (data << (hw20k2->addr_size * 8)) | addr;
+	unsigned int i2c_status;
+
+	i2c_status = hw_read_20kx(hw, I2C_IF_STATUS);
+
+	set_field(&i2c_status, I2C_STATUS_BC,
+		  (4 == (hw20k2->addr_size + hw20k2->data_size)) ?
+		  0 : (hw20k2->addr_size + hw20k2->data_size));
+
+	hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
+	hw20k2_i2c_wait_data_ready(hw);
+	/* Dummy write to trigger the write oprtation */
+	hw_write_20kx(hw, I2C_IF_WDATA, 0);
+	hw20k2_i2c_wait_data_ready(hw);
+
+	/* This is the real data */
+	hw_write_20kx(hw, I2C_IF_WDATA, i2c_data);
+	hw20k2_i2c_wait_data_ready(hw);
+
+	return 0;
+}
+
+static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
+{
+	int err;
+	u32 data;
+	int i;
+	struct regs_cs4382 cs_read = {0};
+	struct regs_cs4382 cs_def = {
+				   0x00000001,  /* Mode Control 1 */
+				   0x00000000,  /* Mode Control 2 */
+				   0x00000084,  /* Mode Control 3 */
+				   0x00000000,  /* Filter Control */
+				   0x00000000,  /* Invert Control */
+				   0x00000024,  /* Mixing Control Pair 1 */
+				   0x00000000,  /* Vol Control A1 */
+				   0x00000000,  /* Vol Control B1 */
+				   0x00000024,  /* Mixing Control Pair 2 */
+				   0x00000000,  /* Vol Control A2 */
+				   0x00000000,  /* Vol Control B2 */
+				   0x00000024,  /* Mixing Control Pair 3 */
+				   0x00000000,  /* Vol Control A3 */
+				   0x00000000,  /* Vol Control B3 */
+				   0x00000024,  /* Mixing Control Pair 4 */
+				   0x00000000,  /* Vol Control A4 */
+				   0x00000000   /* Vol Control B4 */
+				 };
+
+	/* Set DAC reset bit as output */
+	data = hw_read_20kx(hw, GPIO_CTRL);
+	data |= 0x02;
+	hw_write_20kx(hw, GPIO_CTRL, data);
+
+	err = hw20k2_i2c_init(hw, 0x18, 1, 1);
+	if (err < 0)
+		goto End;
+
+	for (i = 0; i < 2; i++) {
+		/* Reset DAC twice just in-case the chip
+		 * didn't initialized properly */
+		data = hw_read_20kx(hw, GPIO_DATA);
+		/* GPIO data bit 1 */
+		data &= 0xFFFFFFFD;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(10);
+		data |= 0x2;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(50);
+
+		/* Reset the 2nd time */
+		data &= 0xFFFFFFFD;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(10);
+		data |= 0x2;
+		hw_write_20kx(hw, GPIO_DATA, data);
+		mdelay(50);
+
+		if (hw20k2_i2c_read(hw, CS4382_MC1,  &cs_read.mode_control_1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_MC2,  &cs_read.mode_control_2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_MC3,  &cs_read.mode_control_3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_FC,   &cs_read.filter_control))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_IC,   &cs_read.invert_control))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC1,  &cs_read.mix_control_P1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA1, &cs_read.vol_control_A1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB1, &cs_read.vol_control_B1))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC2,  &cs_read.mix_control_P2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA2, &cs_read.vol_control_A2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB2, &cs_read.vol_control_B2))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC3,  &cs_read.mix_control_P3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA3, &cs_read.vol_control_A3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB3, &cs_read.vol_control_B3))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_XC4,  &cs_read.mix_control_P4))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCA4, &cs_read.vol_control_A4))
+			continue;
+
+		if (hw20k2_i2c_read(hw, CS4382_VCB4, &cs_read.vol_control_B4))
+			continue;
+
+		if (memcmp(&cs_read, &cs_def, sizeof(cs_read)))
+			continue;
+		else
+			break;
+	}
+
+	if (i >= 2)
+		goto End;
+
+	/* Note: Every I2C write must have some delay.
+	 * This is not a requirement but the delay works here... */
+	hw20k2_i2c_write(hw, CS4382_MC1, 0x80);
+	hw20k2_i2c_write(hw, CS4382_MC2, 0x10);
+	if (1 == info->msr) {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x24);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x24);
+	} else if (2 == info->msr) {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x25);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x25);
+	} else {
+		hw20k2_i2c_write(hw, CS4382_XC1, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC2, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC3, 0x26);
+		hw20k2_i2c_write(hw, CS4382_XC4, 0x26);
+	}
+
+	return 0;
+End:
+
+	hw20k2_i2c_uninit(hw);
+	return -1;
+}
+
+/* ADC operations */
+#define MAKE_WM8775_ADDR(addr, data)	(u32)(((addr<<1)&0xFE)|((data>>8)&0x1))
+#define MAKE_WM8775_DATA(data)	(u32)(data&0xFF)
+
+#define WM8775_IC       0x0B
+#define WM8775_MMC      0x0C
+#define WM8775_AADCL    0x0E
+#define WM8775_AADCR    0x0F
+#define WM8775_ADCMC    0x15
+#define WM8775_RESET    0x17
+
+static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO_DATA);
+	switch (type) {
+	case ADC_MICIN:
+		data = (data & (0x1 << 14)) ? 1 : 0;
+		break;
+	case ADC_LINEIN:
+		data = (data & (0x1 << 14)) ? 0 : 1;
+		break;
+	default:
+		data = 0;
+	}
+	return data;
+}
+
+static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
+{
+	u32 data;
+
+	data = hw_read_20kx(hw, GPIO_DATA);
+	switch (type) {
+	case ADC_MICIN:
+		data |= (0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
+				MAKE_WM8775_DATA(0x101)); /* Mic-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		break;
+	case ADC_LINEIN:
+		data &= ~(0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
+				MAKE_WM8775_DATA(0x102)); /* Line-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
+{
+	int err;
+	u32 mux = 2, data, ctl;
+
+	/*  Set ADC reset bit as output */
+	data = hw_read_20kx(hw, GPIO_CTRL);
+	data |= (0x1 << 15);
+	hw_write_20kx(hw, GPIO_CTRL, data);
+
+	/* Initialize I2C */
+	err = hw20k2_i2c_init(hw, 0x1A, 1, 1);
+	if (err < 0) {
+		printk(KERN_ALERT "ctxfi: Failure to acquire I2C!!!\n");
+		goto error;
+	}
+
+	/* Make ADC in normal operation */
+	data = hw_read_20kx(hw, GPIO_DATA);
+	data &= ~(0x1 << 15);
+	mdelay(10);
+	data |= (0x1 << 15);
+	hw_write_20kx(hw, GPIO_DATA, data);
+	mdelay(50);
+
+	/* Set the master mode (256fs) */
+	if (1 == info->msr) {
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02),
+						MAKE_WM8775_DATA(0x02));
+	} else if (2 == info->msr) {
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
+						MAKE_WM8775_DATA(0x0A));
+	} else {
+		printk(KERN_ALERT "ctxfi: Invalid master sampling "
+				  "rate (msr %d)!!!\n", info->msr);
+		err = -EINVAL;
+		goto error;
+	}
+
+	/* Configure GPIO bit 14 change to line-in/mic-in */
+	ctl = hw_read_20kx(hw, GPIO_CTRL);
+	ctl |= 0x1 << 14;
+	hw_write_20kx(hw, GPIO_CTRL, ctl);
+
+	/* Check using Mic-in or Line-in */
+	data = hw_read_20kx(hw, GPIO_DATA);
+
+	if (mux == 1) {
+		/* Configures GPIO data to select Mic-in */
+		data |= 0x1 << 14;
+		hw_write_20kx(hw, GPIO_DATA, data);
+
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
+				MAKE_WM8775_DATA(0x101)); /* Mic-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xE7),
+				MAKE_WM8775_DATA(0xE7)); /* +12dB boost */
+	} else if (mux == 2) {
+		/* Configures GPIO data to select Line-in */
+		data &= ~(0x1 << 14);
+		hw_write_20kx(hw, GPIO_DATA, data);
+
+		/* Setup ADC */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
+				MAKE_WM8775_DATA(0x102)); /* Line-in */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+		hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
+				MAKE_WM8775_DATA(0xCF)); /* No boost */
+	} else {
+		printk(KERN_ALERT "ctxfi: ERROR!!! Invalid input mux!!!\n");
+		err = -EINVAL;
+		goto error;
+	}
+
+	return 0;
+
+error:
+	hw20k2_i2c_uninit(hw);
+	return err;
+}
+
+static int hw_have_digit_io_switch(struct hw *hw)
+{
+	return 0;
+}
+
+static int hw_card_start(struct hw *hw)
+{
+	int err = 0;
+	struct pci_dev *pci = hw->pci;
+	unsigned int gctl;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	/* Set DMA transfer mask */
+	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
+	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
+		printk(KERN_ERR "ctxfi: architecture does not support PCI "
+		"busmaster DMA with mask 0x%llx\n", CT_XFI_DMA_MASK);
+		err = -ENXIO;
+		goto error1;
+	}
+
+	err = pci_request_regions(pci, "XFi");
+	if (err < 0)
+		goto error1;
+
+	hw->io_base = pci_resource_start(hw->pci, 2);
+	hw->mem_base = (unsigned long)ioremap(hw->io_base,
+					pci_resource_len(hw->pci, 2));
+	if (NULL == (void *)hw->mem_base) {
+		err = -ENOENT;
+		goto error2;
+	}
+
+	/* Switch to 20k2 mode from UAA mode. */
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_UAA, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+
+	/*if ((err = request_irq(pci->irq, ct_atc_interrupt, IRQF_SHARED,
+				atc->chip_details->nm_card, hw))) {
+		goto error3;
+	}
+	hw->irq = pci->irq;
+	*/
+
+	pci_set_master(pci);
+
+	return 0;
+
+/*error3:
+	iounmap((void *)hw->mem_base);
+	hw->mem_base = (unsigned long)NULL;*/
+error2:
+	pci_release_regions(pci);
+	hw->io_base = 0;
+error1:
+	pci_disable_device(pci);
+	return err;
+}
+
+static int hw_card_stop(struct hw *hw)
+{
+	/* TODO: Disable interrupt and so on... */
+	return 0;
+}
+
+static int hw_card_shutdown(struct hw *hw)
+{
+	if (hw->irq >= 0)
+		free_irq(hw->irq, hw);
+
+	hw->irq	= -1;
+
+	if (NULL != ((void *)hw->mem_base))
+		iounmap((void *)hw->mem_base);
+
+	hw->mem_base = (unsigned long)NULL;
+
+	if (hw->io_base)
+		pci_release_regions(hw->pci);
+
+	hw->io_base = 0;
+
+	pci_disable_device(hw->pci);
+
+	return 0;
+}
+
+static int hw_card_init(struct hw *hw, struct card_conf *info)
+{
+	int err;
+	unsigned int gctl;
+	u32 data = 0;
+	struct dac_conf dac_info = {0};
+	struct adc_conf adc_info = {0};
+	struct daio_conf daio_info = {0};
+	struct trn_conf trn_info = {0};
+
+	/* Get PCI io port/memory base address and
+	 * do 20kx core switch if needed. */
+	if (!hw->io_base) {
+		err = hw_card_start(hw);
+		if (err)
+			return err;
+	}
+
+	/* PLL init */
+	err = hw_pll_init(hw, info->rsr);
+	if (err < 0)
+		return err;
+
+	/* kick off auto-init */
+	err = hw_auto_init(hw);
+	if (err < 0)
+		return err;
+
+	gctl = hw_read_20kx(hw, GLOBAL_CNTL_GCTL);
+	set_field(&gctl, GCTL_DBP, 1);
+	set_field(&gctl, GCTL_TBP, 1);
+	set_field(&gctl, GCTL_FBP, 1);
+	set_field(&gctl, GCTL_DPC, 0);
+	hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
+
+	/* Reset all global pending interrupts */
+	hw_write_20kx(hw, INTERRUPT_GIE, 0);
+	/* Reset all SRC pending interrupts */
+	hw_write_20kx(hw, SRC_IP, 0);
+
+	/* TODO: detect the card ID and configure GPIO accordingly. */
+	/* Configures GPIO (0xD802 0x98028) */
+	/*hw_write_20kx(hw, GPIO_CTRL, 0x7F07);*/
+	/* Configures GPIO (SB0880) */
+	/*hw_write_20kx(hw, GPIO_CTRL, 0xFF07);*/
+	hw_write_20kx(hw, GPIO_CTRL, 0xD802);
+
+	/* Enable audio ring */
+	hw_write_20kx(hw, MIXER_AR_ENABLE, 0x01);
+
+	trn_info.vm_pgt_phys = info->vm_pgt_phys;
+	err = hw_trn_init(hw, &trn_info);
+	if (err < 0)
+		return err;
+
+	daio_info.msr = info->msr;
+	err = hw_daio_init(hw, &daio_info);
+	if (err < 0)
+		return err;
+
+	dac_info.msr = info->msr;
+	err = hw_dac_init(hw, &dac_info);
+	if (err < 0)
+		return err;
+
+	adc_info.msr = info->msr;
+	adc_info.input = ADC_LINEIN;
+	adc_info.mic20db = 0;
+	err = hw_adc_init(hw, &adc_info);
+	if (err < 0)
+		return err;
+
+	data = hw_read_20kx(hw, SRC_MCTL);
+	data |= 0x1; /* Enables input from the audio ring */
+	hw_write_20kx(hw, SRC_MCTL, data);
+
+	return 0;
+}
+
+static u32 hw_read_20kx(struct hw *hw, u32 reg)
+{
+	return readl((void *)(hw->mem_base + reg));
+}
+
+static void hw_write_20kx(struct hw *hw, u32 reg, u32 data)
+{
+	writel(data, (void *)(hw->mem_base + reg));
+}
+
+static struct hw ct20k2_preset __devinitdata = {
+	.irq = -1,
+
+	.card_init = hw_card_init,
+	.card_stop = hw_card_stop,
+	.pll_init = hw_pll_init,
+	.is_adc_source_selected = hw_is_adc_input_selected,
+	.select_adc_source = hw_adc_input_select,
+	.have_digit_io_switch = hw_have_digit_io_switch,
+
+	.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
+	.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
+	.src_mgr_get_ctrl_blk = src_mgr_get_ctrl_blk,
+	.src_mgr_put_ctrl_blk = src_mgr_put_ctrl_blk,
+	.src_set_state = src_set_state,
+	.src_set_bm = src_set_bm,
+	.src_set_rsr = src_set_rsr,
+	.src_set_sf = src_set_sf,
+	.src_set_wr = src_set_wr,
+	.src_set_pm = src_set_pm,
+	.src_set_rom = src_set_rom,
+	.src_set_vo = src_set_vo,
+	.src_set_st = src_set_st,
+	.src_set_ie = src_set_ie,
+	.src_set_ilsz = src_set_ilsz,
+	.src_set_bp = src_set_bp,
+	.src_set_cisz = src_set_cisz,
+	.src_set_ca = src_set_ca,
+	.src_set_sa = src_set_sa,
+	.src_set_la = src_set_la,
+	.src_set_pitch = src_set_pitch,
+	.src_set_dirty = src_set_dirty,
+	.src_set_clear_zbufs = src_set_clear_zbufs,
+	.src_set_dirty_all = src_set_dirty_all,
+	.src_commit_write = src_commit_write,
+	.src_get_ca = src_get_ca,
+	.src_get_dirty = src_get_dirty,
+	.src_dirty_conj_mask = src_dirty_conj_mask,
+	.src_mgr_enbs_src = src_mgr_enbs_src,
+	.src_mgr_enb_src = src_mgr_enb_src,
+	.src_mgr_dsb_src = src_mgr_dsb_src,
+	.src_mgr_commit_write = src_mgr_commit_write,
+
+	.srcimp_mgr_get_ctrl_blk = srcimp_mgr_get_ctrl_blk,
+	.srcimp_mgr_put_ctrl_blk = srcimp_mgr_put_ctrl_blk,
+	.srcimp_mgr_set_imaparc = srcimp_mgr_set_imaparc,
+	.srcimp_mgr_set_imapuser = srcimp_mgr_set_imapuser,
+	.srcimp_mgr_set_imapnxt = srcimp_mgr_set_imapnxt,
+	.srcimp_mgr_set_imapaddr = srcimp_mgr_set_imapaddr,
+	.srcimp_mgr_commit_write = srcimp_mgr_commit_write,
+
+	.amixer_rsc_get_ctrl_blk = amixer_rsc_get_ctrl_blk,
+	.amixer_rsc_put_ctrl_blk = amixer_rsc_put_ctrl_blk,
+	.amixer_mgr_get_ctrl_blk = amixer_mgr_get_ctrl_blk,
+	.amixer_mgr_put_ctrl_blk = amixer_mgr_put_ctrl_blk,
+	.amixer_set_mode = amixer_set_mode,
+	.amixer_set_iv = amixer_set_iv,
+	.amixer_set_x = amixer_set_x,
+	.amixer_set_y = amixer_set_y,
+	.amixer_set_sadr = amixer_set_sadr,
+	.amixer_set_se = amixer_set_se,
+	.amixer_set_dirty = amixer_set_dirty,
+	.amixer_set_dirty_all = amixer_set_dirty_all,
+	.amixer_commit_write = amixer_commit_write,
+	.amixer_get_y = amixer_get_y,
+	.amixer_get_dirty = amixer_get_dirty,
+
+	.dai_get_ctrl_blk = dai_get_ctrl_blk,
+	.dai_put_ctrl_blk = dai_put_ctrl_blk,
+	.dai_srt_set_srco = dai_srt_set_srco,
+	.dai_srt_set_srcm = dai_srt_set_srcm,
+	.dai_srt_set_rsr = dai_srt_set_rsr,
+	.dai_srt_set_drat = dai_srt_set_drat,
+	.dai_srt_set_ec = dai_srt_set_ec,
+	.dai_srt_set_et = dai_srt_set_et,
+	.dai_commit_write = dai_commit_write,
+
+	.dao_get_ctrl_blk = dao_get_ctrl_blk,
+	.dao_put_ctrl_blk = dao_put_ctrl_blk,
+	.dao_set_spos = dao_set_spos,
+	.dao_commit_write = dao_commit_write,
+	.dao_get_spos = dao_get_spos,
+
+	.daio_mgr_get_ctrl_blk = daio_mgr_get_ctrl_blk,
+	.daio_mgr_put_ctrl_blk = daio_mgr_put_ctrl_blk,
+	.daio_mgr_enb_dai = daio_mgr_enb_dai,
+	.daio_mgr_dsb_dai = daio_mgr_dsb_dai,
+	.daio_mgr_enb_dao = daio_mgr_enb_dao,
+	.daio_mgr_dsb_dao = daio_mgr_dsb_dao,
+	.daio_mgr_dao_init = daio_mgr_dao_init,
+	.daio_mgr_set_imaparc = daio_mgr_set_imaparc,
+	.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
+	.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
+	.daio_mgr_commit_write = daio_mgr_commit_write,
+};
+
+int __devinit create_20k2_hw_obj(struct hw **rhw)
+{
+	struct hw20k2 *hw20k2;
+
+	*rhw = NULL;
+	hw20k2 = kzalloc(sizeof(*hw20k2), GFP_KERNEL);
+	if (!hw20k2)
+		return -ENOMEM;
+
+	hw20k2->hw = ct20k2_preset;
+	*rhw = &hw20k2->hw;
+
+	return 0;
+}
+
+int destroy_20k2_hw_obj(struct hw *hw)
+{
+	if (hw->io_base)
+		hw_card_shutdown(hw);
+
+	kfree(hw);
+	return 0;
+}
diff --git a/sound/pci/ctxfi/cthw20k2.h b/sound/pci/ctxfi/cthw20k2.h
new file mode 100644
index 00000000000..d2b7daab681
--- /dev/null
+++ b/sound/pci/ctxfi/cthw20k2.h
@@ -0,0 +1,26 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	cthw20k2.h
+ *
+ * @Brief
+ * This file contains the definition of hardware access methord.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTHW20K2_H
+#define CTHW20K2_H
+
+#include "cthardware.h"
+
+int create_20k2_hw_obj(struct hw **rhw);
+int destroy_20k2_hw_obj(struct hw *hw);
+
+#endif /* CTHW20K2_H */
diff --git a/sound/pci/ctxfi/ctimap.c b/sound/pci/ctxfi/ctimap.c
new file mode 100644
index 00000000000..0b73368a4df
--- /dev/null
+++ b/sound/pci/ctxfi/ctimap.c
@@ -0,0 +1,112 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctimap.c
+ *
+ * @Brief
+ * This file contains the implementation of generic input mapper operations
+ * for input mapper management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#include "ctimap.h"
+#include <linux/slab.h>
+
+int input_mapper_add(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data)
+{
+	struct list_head *pos, *pre, *head;
+	struct imapper *pre_ent, *pos_ent;
+
+	head = mappers;
+
+	if (list_empty(head)) {
+		entry->next = entry->addr;
+		map_op(data, entry);
+		list_add(&entry->list, head);
+		return 0;
+	}
+
+	list_for_each(pos, head) {
+		pos_ent = list_entry(pos, struct imapper, list);
+		if (pos_ent->slot > entry->slot) {
+			/* found a position in list */
+			break;
+		}
+	}
+
+	if (pos != head) {
+		pre = pos->prev;
+		if (pre == head)
+			pre = head->prev;
+
+		__list_add(&entry->list, pos->prev, pos);
+	} else {
+		pre = head->prev;
+		pos = head->next;
+		list_add_tail(&entry->list, head);
+	}
+
+	pre_ent = list_entry(pre, struct imapper, list);
+	pos_ent = list_entry(pos, struct imapper, list);
+
+	entry->next = pos_ent->addr;
+	map_op(data, entry);
+	pre_ent->next = entry->addr;
+	map_op(data, pre_ent);
+
+	return 0;
+}
+
+int input_mapper_delete(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data)
+{
+	struct list_head *next, *pre, *head;
+	struct imapper *pre_ent, *next_ent;
+
+	head = mappers;
+
+	if (list_empty(head))
+		return 0;
+
+	pre = (entry->list.prev == head) ? head->prev : entry->list.prev;
+	next = (entry->list.next == head) ? head->next : entry->list.next;
+
+	if (pre == &entry->list) {
+		/* entry is the only one node in mappers list */
+		entry->next = entry->addr = entry->user = entry->slot = 0;
+		map_op(data, entry);
+		list_del(&entry->list);
+		return 0;
+	}
+
+	pre_ent = list_entry(pre, struct imapper, list);
+	next_ent = list_entry(next, struct imapper, list);
+
+	pre_ent->next = next_ent->addr;
+	map_op(data, pre_ent);
+	list_del(&entry->list);
+
+	return 0;
+}
+
+void free_input_mapper_list(struct list_head *head)
+{
+	struct imapper *entry;
+	struct list_head *pos;
+
+	while (!list_empty(head)) {
+		pos = head->next;
+		list_del(pos);
+		entry = list_entry(pos, struct imapper, list);
+		kfree(entry);
+	}
+}
+
diff --git a/sound/pci/ctxfi/ctimap.h b/sound/pci/ctxfi/ctimap.h
new file mode 100644
index 00000000000..53ccf9be8b6
--- /dev/null
+++ b/sound/pci/ctxfi/ctimap.h
@@ -0,0 +1,40 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctimap.h
+ *
+ * @Brief
+ * This file contains the definition of generic input mapper operations
+ * for input mapper management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 23 2008
+ *
+ */
+
+#ifndef CTIMAP_H
+#define CTIMAP_H
+
+#include <linux/list.h>
+
+struct imapper {
+	unsigned short slot; /* the id of the slot containing input data */
+	unsigned short user; /* the id of the user resource consuming data */
+	unsigned short addr; /* the input mapper ram id */
+	unsigned short next; /* the next input mapper ram id */
+	struct list_head	list;
+};
+
+int input_mapper_add(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data);
+
+int input_mapper_delete(struct list_head *mappers, struct imapper *entry,
+		     int (*map_op)(void *, struct imapper *), void *data);
+
+void free_input_mapper_list(struct list_head *mappers);
+
+#endif /* CTIMAP_H */
diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
new file mode 100644
index 00000000000..666722d9de4
--- /dev/null
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -0,0 +1,1123 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctmixer.c
+ *
+ * @Brief
+ * This file contains the implementation of alsa mixer device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 28 2008
+ *
+ */
+
+
+#include "ctmixer.h"
+#include "ctamixer.h"
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/asoundef.h>
+#include <sound/pcm.h>
+#include <sound/tlv.h>
+
+enum CT_SUM_CTL {
+	SUM_IN_F,
+	SUM_IN_R,
+	SUM_IN_C,
+	SUM_IN_S,
+	SUM_IN_F_C,
+
+	NUM_CT_SUMS
+};
+
+enum CT_AMIXER_CTL {
+	/* volume control mixers */
+	AMIXER_MASTER_F,
+	AMIXER_MASTER_R,
+	AMIXER_MASTER_C,
+	AMIXER_MASTER_S,
+	AMIXER_PCM_F,
+	AMIXER_PCM_R,
+	AMIXER_PCM_C,
+	AMIXER_PCM_S,
+	AMIXER_SPDIFI,
+	AMIXER_LINEIN,
+	AMIXER_MIC,
+	AMIXER_SPDIFO,
+	AMIXER_WAVE_F,
+	AMIXER_WAVE_R,
+	AMIXER_WAVE_C,
+	AMIXER_WAVE_S,
+	AMIXER_MASTER_F_C,
+	AMIXER_PCM_F_C,
+	AMIXER_SPDIFI_C,
+	AMIXER_LINEIN_C,
+	AMIXER_MIC_C,
+
+	/* this should always be the last one */
+	NUM_CT_AMIXERS
+};
+
+enum CTALSA_MIXER_CTL {
+	/* volume control mixers */
+	MIXER_MASTER_P,
+	MIXER_PCM_P,
+	MIXER_LINEIN_P,
+	MIXER_MIC_P,
+	MIXER_SPDIFI_P,
+	MIXER_SPDIFO_P,
+	MIXER_WAVEF_P,
+	MIXER_WAVER_P,
+	MIXER_WAVEC_P,
+	MIXER_WAVES_P,
+	MIXER_MASTER_C,
+	MIXER_PCM_C,
+	MIXER_LINEIN_C,
+	MIXER_MIC_C,
+	MIXER_SPDIFI_C,
+
+	/* switch control mixers */
+	MIXER_PCM_C_S,
+	MIXER_LINEIN_C_S,
+	MIXER_MIC_C_S,
+	MIXER_SPDIFI_C_S,
+	MIXER_LINEIN_P_S,
+	MIXER_SPDIFO_P_S,
+	MIXER_SPDIFI_P_S,
+	MIXER_WAVEF_P_S,
+	MIXER_WAVER_P_S,
+	MIXER_WAVEC_P_S,
+	MIXER_WAVES_P_S,
+	MIXER_DIGITAL_IO_S,
+	MIXER_IEC958_MASK,
+	MIXER_IEC958_DEFAULT,
+	MIXER_IEC958_STREAM,
+
+	/* this should always be the last one */
+	NUM_CTALSA_MIXERS
+};
+
+#define VOL_MIXER_START		MIXER_MASTER_P
+#define VOL_MIXER_END		MIXER_SPDIFI_C
+#define VOL_MIXER_NUM		(VOL_MIXER_END - VOL_MIXER_START + 1)
+#define SWH_MIXER_START		MIXER_PCM_C_S
+#define SWH_MIXER_END		MIXER_DIGITAL_IO_S
+#define SWH_CAPTURE_START	MIXER_PCM_C_S
+#define SWH_CAPTURE_END		MIXER_SPDIFI_C_S
+
+#define CHN_NUM		2
+
+struct ct_kcontrol_init {
+	unsigned char ctl;
+	char *name;
+};
+
+static struct ct_kcontrol_init
+ct_kcontrol_init_table[NUM_CTALSA_MIXERS] = {
+	[MIXER_MASTER_P] = {
+		.ctl = 1,
+		.name = "Master Playback Volume",
+	},
+	[MIXER_MASTER_C] = {
+		.ctl = 1,
+		.name = "Master Capture Volume",
+	},
+	[MIXER_PCM_P] = {
+		.ctl = 1,
+		.name = "PCM Playback Volume",
+	},
+	[MIXER_PCM_C] = {
+		.ctl = 1,
+		.name = "PCM Capture Volume",
+	},
+	[MIXER_LINEIN_P] = {
+		.ctl = 1,
+		.name = "Line-in Playback Volume",
+	},
+	[MIXER_LINEIN_C] = {
+		.ctl = 1,
+		.name = "Line-in Capture Volume",
+	},
+	[MIXER_MIC_P] = {
+		.ctl = 1,
+		.name = "Mic Playback Volume",
+	},
+	[MIXER_MIC_C] = {
+		.ctl = 1,
+		.name = "Mic Capture Volume",
+	},
+	[MIXER_SPDIFI_P] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Playback Volume",
+	},
+	[MIXER_SPDIFI_C] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Capture Volume",
+	},
+	[MIXER_SPDIFO_P] = {
+		.ctl = 1,
+		.name = "S/PDIF-out Playback Volume",
+	},
+	[MIXER_WAVEF_P] = {
+		.ctl = 1,
+		.name = "Front Playback Volume",
+	},
+	[MIXER_WAVES_P] = {
+		.ctl = 1,
+		.name = "Side Playback Volume",
+	},
+	[MIXER_WAVEC_P] = {
+		.ctl = 1,
+		.name = "Center/LFE Playback Volume",
+	},
+	[MIXER_WAVER_P] = {
+		.ctl = 1,
+		.name = "Surround Playback Volume",
+	},
+
+	[MIXER_PCM_C_S] = {
+		.ctl = 1,
+		.name = "PCM Capture Switch",
+	},
+	[MIXER_LINEIN_C_S] = {
+		.ctl = 1,
+		.name = "Line-in Capture Switch",
+	},
+	[MIXER_MIC_C_S] = {
+		.ctl = 1,
+		.name = "Mic Capture Switch",
+	},
+	[MIXER_SPDIFI_C_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Capture Switch",
+	},
+	[MIXER_LINEIN_P_S] = {
+		.ctl = 1,
+		.name = "Line-in Playback Switch",
+	},
+	[MIXER_SPDIFO_P_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-out Playback Switch",
+	},
+	[MIXER_SPDIFI_P_S] = {
+		.ctl = 1,
+		.name = "S/PDIF-in Playback Switch",
+	},
+	[MIXER_WAVEF_P_S] = {
+		.ctl = 1,
+		.name = "Front Playback Switch",
+	},
+	[MIXER_WAVES_P_S] = {
+		.ctl = 1,
+		.name = "Side Playback Switch",
+	},
+	[MIXER_WAVEC_P_S] = {
+		.ctl = 1,
+		.name = "Center/LFE Playback Switch",
+	},
+	[MIXER_WAVER_P_S] = {
+		.ctl = 1,
+		.name = "Surround Playback Switch",
+	},
+	[MIXER_DIGITAL_IO_S] = {
+		.ctl = 0,
+		.name = "Digit-IO Playback Switch",
+	},
+};
+
+static void
+ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type);
+
+static void
+ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type);
+
+static struct snd_kcontrol *kctls[2] = {NULL};
+
+static enum CT_AMIXER_CTL get_amixer_index(enum CTALSA_MIXER_CTL alsa_index)
+{
+	switch (alsa_index) {
+	case MIXER_MASTER_P:	return AMIXER_MASTER_F;
+	case MIXER_MASTER_C:	return AMIXER_MASTER_F_C;
+	case MIXER_PCM_P:	return AMIXER_PCM_F;
+	case MIXER_PCM_C:
+	case MIXER_PCM_C_S:	return AMIXER_PCM_F_C;
+	case MIXER_LINEIN_P:	return AMIXER_LINEIN;
+	case MIXER_LINEIN_C:
+	case MIXER_LINEIN_C_S:	return AMIXER_LINEIN_C;
+	case MIXER_MIC_P:	return AMIXER_MIC;
+	case MIXER_MIC_C:
+	case MIXER_MIC_C_S:	return AMIXER_MIC_C;
+	case MIXER_SPDIFI_P:	return AMIXER_SPDIFI;
+	case MIXER_SPDIFI_C:
+	case MIXER_SPDIFI_C_S:	return AMIXER_SPDIFI_C;
+	case MIXER_SPDIFO_P:	return AMIXER_SPDIFO;
+	case MIXER_WAVEF_P:	return AMIXER_WAVE_F;
+	case MIXER_WAVES_P:	return AMIXER_WAVE_S;
+	case MIXER_WAVEC_P:	return AMIXER_WAVE_C;
+	case MIXER_WAVER_P:	return AMIXER_WAVE_R;
+	default:		return NUM_CT_AMIXERS;
+	}
+}
+
+static enum CT_AMIXER_CTL get_recording_amixer(enum CT_AMIXER_CTL index)
+{
+	switch (index) {
+	case AMIXER_MASTER_F:	return AMIXER_MASTER_F_C;
+	case AMIXER_PCM_F:	return AMIXER_PCM_F_C;
+	case AMIXER_SPDIFI:	return AMIXER_SPDIFI_C;
+	case AMIXER_LINEIN:	return AMIXER_LINEIN_C;
+	case AMIXER_MIC:	return AMIXER_MIC_C;
+	default:		return NUM_CT_AMIXERS;
+	}
+}
+
+static unsigned char
+get_switch_state(struct ct_mixer *mixer, enum CTALSA_MIXER_CTL type)
+{
+	return (mixer->switch_state & (0x1 << (type - SWH_MIXER_START)))
+		? 1 : 0;
+}
+
+static void
+set_switch_state(struct ct_mixer *mixer,
+		 enum CTALSA_MIXER_CTL type, unsigned char state)
+{
+	if (state)
+		mixer->switch_state |= (0x1 << (type - SWH_MIXER_START));
+	else
+		mixer->switch_state &= ~(0x1 << (type - SWH_MIXER_START));
+}
+
+#if 0 /* not used */
+/* Map integer value ranging from 0 to 65535 to 14-bit float value ranging
+ * from 2^-6 to (1+1023/1024) */
+static unsigned int uint16_to_float14(unsigned int x)
+{
+	unsigned int i;
+
+	if (x < 17)
+		return 0;
+
+	x *= 2031;
+	x /= 65535;
+	x += 16;
+
+	/* i <= 6 */
+	for (i = 0; !(x & 0x400); i++)
+		x <<= 1;
+
+	x = (((7 - i) & 0x7) << 10) | (x & 0x3ff);
+
+	return x;
+}
+
+static unsigned int float14_to_uint16(unsigned int x)
+{
+	unsigned int e;
+
+	if (!x)
+		return x;
+
+	e = (x >> 10) & 0x7;
+	x &= 0x3ff;
+	x += 1024;
+	x >>= (7 - e);
+	x -= 16;
+	x *= 65535;
+	x /= 2031;
+
+	return x;
+}
+#endif /* not used */
+
+#define VOL_SCALE	0x1c
+#define VOL_MAX		0x100
+
+static const DECLARE_TLV_DB_SCALE(ct_vol_db_scale, -6400, 25, 1);
+
+static int ct_alsa_mix_volume_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = VOL_MAX;
+
+	return 0;
+}
+
+static int ct_alsa_mix_volume_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value);
+	struct amixer *amixer;
+	int i, val;
+
+	for (i = 0; i < 2; i++) {
+		amixer = ((struct ct_mixer *)atc->mixer)->
+						amixers[type*CHN_NUM+i];
+		val = amixer->ops->get_scale(amixer) / VOL_SCALE;
+		if (val < 0)
+			val = 0;
+		else if (val > VOL_MAX)
+			val = VOL_MAX;
+		ucontrol->value.integer.value[i] = val;
+	}
+
+	return 0;
+}
+
+static int ct_alsa_mix_volume_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	struct ct_mixer *mixer = atc->mixer;
+	enum CT_AMIXER_CTL type = get_amixer_index(kcontrol->private_value);
+	struct amixer *amixer;
+	int i, j, val, oval, change = 0;
+
+	for (i = 0; i < 2; i++) {
+		val = ucontrol->value.integer.value[i];
+		if (val < 0)
+			val = 0;
+		else if (val > VOL_MAX)
+			val = VOL_MAX;
+		val *= VOL_SCALE;
+		amixer = mixer->amixers[type*CHN_NUM+i];
+		oval = amixer->ops->get_scale(amixer);
+		if (val != oval) {
+			amixer->ops->set_scale(amixer, val);
+			amixer->ops->commit_write(amixer);
+			change = 1;
+			/* Synchronize Master/PCM playback AMIXERs. */
+			if (AMIXER_MASTER_F == type || AMIXER_PCM_F == type) {
+				for (j = 1; j < 4; j++) {
+					amixer = mixer->
+						amixers[(type+j)*CHN_NUM+i];
+					amixer->ops->set_scale(amixer, val);
+					amixer->ops->commit_write(amixer);
+				}
+			}
+		}
+	}
+
+	return change;
+}
+
+static struct snd_kcontrol_new vol_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info		= ct_alsa_mix_volume_info,
+	.get		= ct_alsa_mix_volume_get,
+	.put		= ct_alsa_mix_volume_put,
+	.tlv		= { .p =  ct_vol_db_scale },
+};
+
+static void
+do_line_mic_switch(struct ct_atc *atc, enum CTALSA_MIXER_CTL type)
+{
+
+	if (MIXER_LINEIN_C_S == type) {
+		atc->select_line_in(atc);
+		set_switch_state(atc->mixer, MIXER_MIC_C_S, 0);
+		snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE,
+							&kctls[1]->id);
+	} else if (MIXER_MIC_C_S == type) {
+		atc->select_mic_in(atc);
+		set_switch_state(atc->mixer, MIXER_LINEIN_C_S, 0);
+		snd_ctl_notify(atc->card, SNDRV_CTL_EVENT_MASK_VALUE,
+							&kctls[0]->id);
+	}
+}
+
+static void
+do_digit_io_switch(struct ct_atc *atc, int state)
+{
+	struct ct_mixer *mixer = atc->mixer;
+
+	if (state) {
+		atc->select_digit_io(atc);
+		atc->spdif_out_unmute(atc,
+				get_switch_state(mixer, MIXER_SPDIFO_P_S));
+		atc->spdif_in_unmute(atc, 1);
+		atc->line_in_unmute(atc, 0);
+		return;
+	}
+
+	if (get_switch_state(mixer, MIXER_LINEIN_C_S))
+		atc->select_line_in(atc);
+	else if (get_switch_state(mixer, MIXER_MIC_C_S))
+		atc->select_mic_in(atc);
+
+	atc->spdif_out_unmute(atc, 0);
+	atc->spdif_in_unmute(atc, 0);
+	atc->line_in_unmute(atc, 1);
+	return;
+}
+
+static int ct_alsa_mix_switch_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	uinfo->value.integer.step = 1;
+
+	return 0;
+}
+
+static int ct_alsa_mix_switch_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_mixer *mixer =
+		((struct ct_atc *)snd_kcontrol_chip(kcontrol))->mixer;
+	enum CTALSA_MIXER_CTL type = kcontrol->private_value;
+
+	ucontrol->value.integer.value[0] = get_switch_state(mixer, type);
+	return 0;
+}
+
+static int ct_alsa_mix_switch_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	struct ct_mixer *mixer = atc->mixer;
+	enum CTALSA_MIXER_CTL type = kcontrol->private_value;
+	int state;
+
+	state = ucontrol->value.integer.value[0];
+	if (get_switch_state(mixer, type) == state)
+		return 0;
+
+	set_switch_state(mixer, type, state);
+	/* Do changes in mixer. */
+	if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
+		if (state) {
+			ct_mixer_recording_select(mixer,
+						  get_amixer_index(type));
+		} else {
+			ct_mixer_recording_unselect(mixer,
+						    get_amixer_index(type));
+		}
+	}
+	/* Do changes out of mixer. */
+	if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
+		do_line_mic_switch(atc, type);
+	else if (MIXER_WAVEF_P_S == type)
+		atc->line_front_unmute(atc, state);
+	else if (MIXER_WAVES_P_S == type)
+		atc->line_surround_unmute(atc, state);
+	else if (MIXER_WAVEC_P_S == type)
+		atc->line_clfe_unmute(atc, state);
+	else if (MIXER_WAVER_P_S == type)
+		atc->line_rear_unmute(atc, state);
+	else if (MIXER_LINEIN_P_S == type)
+		atc->line_in_unmute(atc, state);
+	else if (MIXER_SPDIFO_P_S == type)
+		atc->spdif_out_unmute(atc, state);
+	else if (MIXER_SPDIFI_P_S == type)
+		atc->spdif_in_unmute(atc, state);
+	else if (MIXER_DIGITAL_IO_S == type)
+		do_digit_io_switch(atc, state);
+
+	return 1;
+}
+
+static struct snd_kcontrol_new swh_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface		= SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info		= ct_alsa_mix_switch_info,
+	.get		= ct_alsa_mix_switch_get,
+	.put		= ct_alsa_mix_switch_put
+};
+
+static int ct_spdif_info(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int ct_spdif_get_mask(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.iec958.status[0] = 0xff;
+	ucontrol->value.iec958.status[1] = 0xff;
+	ucontrol->value.iec958.status[2] = 0xff;
+	ucontrol->value.iec958.status[3] = 0xff;
+	return 0;
+}
+
+static int ct_spdif_default_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	unsigned int status = SNDRV_PCM_DEFAULT_CON_SPDIF;
+
+	ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+	ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+	ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+	ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+
+	return 0;
+}
+
+static int ct_spdif_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	unsigned int status;
+
+	atc->spdif_out_get_status(atc, &status);
+	ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+	ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+	ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+	ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+
+	return 0;
+}
+
+static int ct_spdif_put(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct ct_atc *atc = snd_kcontrol_chip(kcontrol);
+	int change;
+	unsigned int status, old_status;
+
+	status = (ucontrol->value.iec958.status[0] << 0) |
+		 (ucontrol->value.iec958.status[1] << 8) |
+		 (ucontrol->value.iec958.status[2] << 16) |
+		 (ucontrol->value.iec958.status[3] << 24);
+
+	atc->spdif_out_get_status(atc, &old_status);
+	change = (old_status != status);
+	if (change)
+		atc->spdif_out_set_status(atc, status);
+
+	return change;
+}
+
+static struct snd_kcontrol_new iec958_mask_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READ,
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_get_mask,
+	.private_value	= MIXER_IEC958_MASK
+};
+
+static struct snd_kcontrol_new iec958_default_ctl = {
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_default_get,
+	.put		= ct_spdif_put,
+	.private_value	= MIXER_IEC958_DEFAULT
+};
+
+static struct snd_kcontrol_new iec958_ctl = {
+	.access		= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface		= SNDRV_CTL_ELEM_IFACE_PCM,
+	.name		= SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM),
+	.count		= 1,
+	.info		= ct_spdif_info,
+	.get		= ct_spdif_get,
+	.put		= ct_spdif_put,
+	.private_value	= MIXER_IEC958_STREAM
+};
+
+#define NUM_IEC958_CTL 3
+
+static int
+ct_mixer_kcontrol_new(struct ct_mixer *mixer, struct snd_kcontrol_new *new)
+{
+	struct snd_kcontrol *kctl;
+	int err;
+
+	kctl = snd_ctl_new1(new, mixer->atc);
+	if (NULL == kctl)
+		return -ENOMEM;
+
+	if (SNDRV_CTL_ELEM_IFACE_PCM == kctl->id.iface)
+		kctl->id.device = IEC958;
+
+	err = snd_ctl_add(mixer->atc->card, kctl);
+	if (err)
+		return err;
+
+	switch (new->private_value) {
+	case MIXER_LINEIN_C_S:
+		kctls[0] = kctl; break;
+	case MIXER_MIC_C_S:
+		kctls[1] = kctl; break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ct_mixer_kcontrols_create(struct ct_mixer *mixer)
+{
+	enum CTALSA_MIXER_CTL type;
+	struct ct_atc *atc = mixer->atc;
+	int err;
+
+	/* Create snd kcontrol instances on demand */
+	for (type = VOL_MIXER_START; type <= VOL_MIXER_END; type++) {
+		if (ct_kcontrol_init_table[type].ctl) {
+			vol_ctl.name = ct_kcontrol_init_table[type].name;
+			vol_ctl.private_value = (unsigned long)type;
+			err = ct_mixer_kcontrol_new(mixer, &vol_ctl);
+			if (err)
+				return err;
+		}
+	}
+
+	ct_kcontrol_init_table[MIXER_DIGITAL_IO_S].ctl =
+					atc->have_digit_io_switch(atc);
+	for (type = SWH_MIXER_START; type <= SWH_MIXER_END; type++) {
+		if (ct_kcontrol_init_table[type].ctl) {
+			swh_ctl.name = ct_kcontrol_init_table[type].name;
+			swh_ctl.private_value = (unsigned long)type;
+			err = ct_mixer_kcontrol_new(mixer, &swh_ctl);
+			if (err)
+				return err;
+		}
+	}
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_mask_ctl);
+	if (err)
+		return err;
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_default_ctl);
+	if (err)
+		return err;
+
+	err = ct_mixer_kcontrol_new(mixer, &iec958_ctl);
+	if (err)
+		return err;
+
+	atc->line_front_unmute(atc, 1);
+	set_switch_state(mixer, MIXER_WAVEF_P_S, 1);
+	atc->line_surround_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVES_P_S, 0);
+	atc->line_clfe_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVEC_P_S, 0);
+	atc->line_rear_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_WAVER_P_S, 0);
+	atc->spdif_out_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_SPDIFO_P_S, 0);
+	atc->line_in_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_LINEIN_P_S, 0);
+	atc->spdif_in_unmute(atc, 0);
+	set_switch_state(mixer, MIXER_SPDIFI_P_S, 0);
+
+	set_switch_state(mixer, MIXER_PCM_C_S, 1);
+	set_switch_state(mixer, MIXER_LINEIN_C_S, 1);
+	set_switch_state(mixer, MIXER_SPDIFI_C_S, 1);
+
+	return 0;
+}
+
+static void
+ct_mixer_recording_select(struct ct_mixer *mixer, enum CT_AMIXER_CTL type)
+{
+	struct amixer *amix_d;
+	struct sum *sum_c;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		amix_d = mixer->amixers[type*CHN_NUM+i];
+		sum_c = mixer->sums[SUM_IN_F_C*CHN_NUM+i];
+		amix_d->ops->set_sum(amix_d, sum_c);
+		amix_d->ops->commit_write(amix_d);
+	}
+}
+
+static void
+ct_mixer_recording_unselect(struct ct_mixer *mixer, enum CT_AMIXER_CTL type)
+{
+	struct amixer *amix_d;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		amix_d = mixer->amixers[type*CHN_NUM+i];
+		amix_d->ops->set_sum(amix_d, NULL);
+		amix_d->ops->commit_write(amix_d);
+	}
+}
+
+static int ct_mixer_get_resources(struct ct_mixer *mixer)
+{
+	struct sum_mgr *sum_mgr;
+	struct sum *sum;
+	struct sum_desc sum_desc = {0};
+	struct amixer_mgr *amixer_mgr;
+	struct amixer *amixer;
+	struct amixer_desc am_desc = {0};
+	int err;
+	int i;
+
+	/* Allocate sum resources for mixer obj */
+	sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
+	sum_desc.msr = mixer->atc->msr;
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		err = sum_mgr->get_sum(sum_mgr, &sum_desc, &sum);
+		if (err) {
+			printk(KERN_ERR "ctxfi:Failed to get sum resources for "
+					  "front output!\n");
+			break;
+		}
+		mixer->sums[i] = sum;
+	}
+	if (err)
+		goto error1;
+
+	/* Allocate amixer resources for mixer obj */
+	amixer_mgr = (struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER];
+	am_desc.msr = mixer->atc->msr;
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		err = amixer_mgr->get_amixer(amixer_mgr, &am_desc, &amixer);
+		if (err) {
+			printk(KERN_ERR "ctxfi:Failed to get amixer resources "
+			       "for mixer obj!\n");
+			break;
+		}
+		mixer->amixers[i] = amixer;
+	}
+	if (err)
+		goto error2;
+
+	return 0;
+
+error2:
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		if (NULL != mixer->amixers[i]) {
+			amixer = mixer->amixers[i];
+			amixer_mgr->put_amixer(amixer_mgr, amixer);
+			mixer->amixers[i] = NULL;
+		}
+	}
+error1:
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		if (NULL != mixer->sums[i]) {
+			sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]);
+			mixer->sums[i] = NULL;
+		}
+	}
+
+	return err;
+}
+
+static int ct_mixer_get_mem(struct ct_mixer **rmixer)
+{
+	struct ct_mixer *mixer;
+	int err;
+
+	*rmixer = NULL;
+	/* Allocate mem for mixer obj */
+	mixer = kzalloc(sizeof(*mixer), GFP_KERNEL);
+	if (NULL == mixer)
+		return -ENOMEM;
+
+	mixer->amixers = kzalloc(sizeof(void *)*(NUM_CT_AMIXERS*CHN_NUM),
+				 GFP_KERNEL);
+	if (NULL == mixer->amixers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+	mixer->sums = kzalloc(sizeof(void *)*(NUM_CT_SUMS*CHN_NUM), GFP_KERNEL);
+	if (NULL == mixer->sums) {
+		err = -ENOMEM;
+		goto error2;
+	}
+
+	*rmixer = mixer;
+	return 0;
+
+error2:
+	kfree(mixer->amixers);
+error1:
+	kfree(mixer);
+	return err;
+}
+
+static int ct_mixer_topology_build(struct ct_mixer *mixer)
+{
+	struct sum *sum;
+	struct amixer *amix_d, *amix_s;
+	enum CT_AMIXER_CTL i, j;
+
+	/* Build topology from destination to source */
+
+	/* Set up Master mixer */
+	for (i = AMIXER_MASTER_F, j = SUM_IN_F;
+					i <= AMIXER_MASTER_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		sum = mixer->sums[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		sum = mixer->sums[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+	}
+
+	/* Set up Wave-out mixer */
+	for (i = AMIXER_WAVE_F, j = AMIXER_MASTER_F;
+					i <= AMIXER_WAVE_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		amix_s = mixer->amixers[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		amix_s = mixer->amixers[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+	}
+
+	/* Set up S/PDIF-out mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM];
+	amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+	amix_d = mixer->amixers[AMIXER_SPDIFO*CHN_NUM+1];
+	amix_s = mixer->amixers[AMIXER_MASTER_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, &amix_s->rsc, INIT_VOL, NULL);
+
+	/* Set up PCM-in mixer */
+	for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) {
+		amix_d = mixer->amixers[i*CHN_NUM];
+		sum = mixer->sums[j*CHN_NUM];
+		amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+		amix_d = mixer->amixers[i*CHN_NUM+1];
+		sum = mixer->sums[j*CHN_NUM+1];
+		amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	}
+
+	/* Set up Line-in mixer */
+	amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_LINEIN*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Mic-in mixer */
+	amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_MIC*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up S/PDIF-in mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_SPDIFI*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Master recording mixer */
+	amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+	amix_d = mixer->amixers[AMIXER_MASTER_F_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, &sum->rsc, INIT_VOL, NULL);
+
+	/* Set up PCM-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_PCM_F_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Line-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_LINEIN_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up Mic-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_MIC_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	/* Set up S/PDIF-in recording mixer */
+	amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+	amix_d = mixer->amixers[AMIXER_SPDIFI_C*CHN_NUM+1];
+	sum = mixer->sums[SUM_IN_F_C*CHN_NUM+1];
+	amix_d->ops->setup(amix_d, NULL, INIT_VOL, sum);
+
+	return 0;
+}
+
+static int mixer_set_input_port(struct amixer *amixer, struct rsc *rsc)
+{
+	amixer->ops->set_input(amixer, rsc);
+	amixer->ops->commit_write(amixer);
+
+	return 0;
+}
+
+static enum CT_AMIXER_CTL port_to_amixer(enum MIXER_PORT_T type)
+{
+	switch (type) {
+	case MIX_WAVE_FRONT:	return AMIXER_WAVE_F;
+	case MIX_WAVE_SURROUND:	return AMIXER_WAVE_S;
+	case MIX_WAVE_CENTLFE:	return AMIXER_WAVE_C;
+	case MIX_WAVE_REAR:	return AMIXER_WAVE_R;
+	case MIX_PCMO_FRONT:	return AMIXER_MASTER_F_C;
+	case MIX_SPDIF_OUT:	return AMIXER_SPDIFO;
+	case MIX_LINE_IN:	return AMIXER_LINEIN;
+	case MIX_MIC_IN:	return AMIXER_MIC;
+	case MIX_SPDIF_IN:	return AMIXER_SPDIFI;
+	case MIX_PCMI_FRONT:	return AMIXER_PCM_F;
+	case MIX_PCMI_SURROUND:	return AMIXER_PCM_S;
+	case MIX_PCMI_CENTLFE:	return AMIXER_PCM_C;
+	case MIX_PCMI_REAR:	return AMIXER_PCM_R;
+	default: 		return 0;
+	}
+}
+
+static int mixer_get_output_ports(struct ct_mixer *mixer,
+				  enum MIXER_PORT_T type,
+				  struct rsc **rleft, struct rsc **rright)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	if (NULL != rleft)
+		*rleft = &((struct amixer *)mixer->amixers[amix*CHN_NUM])->rsc;
+
+	if (NULL != rright)
+		*rright =
+			&((struct amixer *)mixer->amixers[amix*CHN_NUM+1])->rsc;
+
+	return 0;
+}
+
+static int mixer_set_input_left(struct ct_mixer *mixer,
+				enum MIXER_PORT_T type, struct rsc *rsc)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc);
+	amix = get_recording_amixer(amix);
+	if (amix < NUM_CT_AMIXERS)
+		mixer_set_input_port(mixer->amixers[amix*CHN_NUM], rsc);
+
+	return 0;
+}
+
+static int
+mixer_set_input_right(struct ct_mixer *mixer,
+		      enum MIXER_PORT_T type, struct rsc *rsc)
+{
+	enum CT_AMIXER_CTL amix = port_to_amixer(type);
+
+	mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc);
+	amix = get_recording_amixer(amix);
+	if (amix < NUM_CT_AMIXERS)
+		mixer_set_input_port(mixer->amixers[amix*CHN_NUM+1], rsc);
+
+	return 0;
+}
+
+int ct_mixer_destroy(struct ct_mixer *mixer)
+{
+	struct sum_mgr *sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
+	struct amixer_mgr *amixer_mgr =
+			(struct amixer_mgr *)mixer->atc->rsc_mgrs[AMIXER];
+	struct amixer *amixer;
+	int i = 0;
+
+	/* Release amixer resources */
+	for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
+		if (NULL != mixer->amixers[i]) {
+			amixer = mixer->amixers[i];
+			amixer_mgr->put_amixer(amixer_mgr, amixer);
+		}
+	}
+
+	/* Release sum resources */
+	for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
+		if (NULL != mixer->sums[i])
+			sum_mgr->put_sum(sum_mgr, (struct sum *)mixer->sums[i]);
+	}
+
+	/* Release mem assigned to mixer object */
+	kfree(mixer->sums);
+	kfree(mixer->amixers);
+	kfree(mixer);
+
+	return 0;
+}
+
+int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer)
+{
+	struct ct_mixer *mixer;
+	int err;
+
+	*rmixer = NULL;
+
+	/* Allocate mem for mixer obj */
+	err = ct_mixer_get_mem(&mixer);
+	if (err)
+		return err;
+
+	mixer->switch_state = 0;
+	mixer->atc = atc;
+	/* Set operations */
+	mixer->get_output_ports = mixer_get_output_ports;
+	mixer->set_input_left = mixer_set_input_left;
+	mixer->set_input_right = mixer_set_input_right;
+
+	/* Allocate chip resources for mixer obj */
+	err = ct_mixer_get_resources(mixer);
+	if (err)
+		goto error;
+
+	/* Build internal mixer topology */
+	ct_mixer_topology_build(mixer);
+
+	*rmixer = mixer;
+
+	return 0;
+
+error:
+	ct_mixer_destroy(mixer);
+	return err;
+}
+
+int ct_alsa_mix_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name)
+{
+	int err;
+
+	/* Create snd kcontrol instances on demand */
+	/* vol_ctl.device = swh_ctl.device = device; */ /* better w/ device 0 */
+	err = ct_mixer_kcontrols_create((struct ct_mixer *)atc->mixer);
+	if (err)
+		return err;
+
+	strcpy(atc->card->mixername, device_name);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctmixer.h b/sound/pci/ctxfi/ctmixer.h
new file mode 100644
index 00000000000..e2d96ebde74
--- /dev/null
+++ b/sound/pci/ctxfi/ctmixer.h
@@ -0,0 +1,67 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctmixer.h
+ *
+ * @Brief
+ * This file contains the definition of the mixer device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTMIXER_H
+#define CTMIXER_H
+
+#include "ctatc.h"
+#include "ctresource.h"
+
+#define INIT_VOL	0x1c00
+
+enum MIXER_PORT_T {
+	MIX_WAVE_FRONT,
+	MIX_WAVE_REAR,
+	MIX_WAVE_CENTLFE,
+	MIX_WAVE_SURROUND,
+	MIX_SPDIF_OUT,
+	MIX_PCMO_FRONT,
+	MIX_MIC_IN,
+	MIX_LINE_IN,
+	MIX_SPDIF_IN,
+	MIX_PCMI_FRONT,
+	MIX_PCMI_REAR,
+	MIX_PCMI_CENTLFE,
+	MIX_PCMI_SURROUND,
+
+	NUM_MIX_PORTS
+};
+
+/* alsa mixer descriptor */
+struct ct_mixer {
+	struct ct_atc *atc;
+
+	void **amixers;		/* amixer resources for volume control */
+	void **sums;		/* sum resources for signal collection */
+	unsigned int switch_state; /* A bit-map to indicate state of switches */
+
+	int (*get_output_ports)(struct ct_mixer *mixer, enum MIXER_PORT_T type,
+				  struct rsc **rleft, struct rsc **rright);
+
+	int (*set_input_left)(struct ct_mixer *mixer,
+			      enum MIXER_PORT_T type, struct rsc *rsc);
+	int (*set_input_right)(struct ct_mixer *mixer,
+			       enum MIXER_PORT_T type, struct rsc *rsc);
+};
+
+int ct_alsa_mix_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name);
+int ct_mixer_create(struct ct_atc *atc, struct ct_mixer **rmixer);
+int ct_mixer_destroy(struct ct_mixer *mixer);
+
+#endif /* CTMIXER_H */
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
new file mode 100644
index 00000000000..9e5c0c4da72
--- /dev/null
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -0,0 +1,426 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctpcm.c
+ *
+ * @Brief
+ * This file contains the definition of the pcm device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Apr 2 2008
+ *
+ */
+
+#include "ctpcm.h"
+#include "cttimer.h"
+#include <sound/pcm.h>
+
+/* Hardware descriptions for playback */
+static struct snd_pcm_hardware ct_pcm_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID |
+				   SNDRV_PCM_INFO_PAUSE),
+	.formats		= (SNDRV_PCM_FMTBIT_U8 |
+				   SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_3LE |
+				   SNDRV_PCM_FMTBIT_S32_LE |
+				   SNDRV_PCM_FMTBIT_FLOAT_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS |
+				   SNDRV_PCM_RATE_8000_192000),
+	.rate_min		= 8000,
+	.rate_max		= 192000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (64),
+	.period_bytes_max	= (128*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+static struct snd_pcm_hardware ct_spdif_passthru_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID |
+				   SNDRV_PCM_INFO_PAUSE),
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+	.rates			= (SNDRV_PCM_RATE_48000 |
+				   SNDRV_PCM_RATE_44100 |
+				   SNDRV_PCM_RATE_32000),
+	.rate_min		= 32000,
+	.rate_max		= 48000,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (64),
+	.period_bytes_max	= (128*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+/* Hardware descriptions for capture */
+static struct snd_pcm_hardware ct_pcm_capture_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_PAUSE |
+				   SNDRV_PCM_INFO_MMAP_VALID),
+	.formats		= (SNDRV_PCM_FMTBIT_U8 |
+				   SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_3LE |
+				   SNDRV_PCM_FMTBIT_S32_LE |
+				   SNDRV_PCM_FMTBIT_FLOAT_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS |
+				   SNDRV_PCM_RATE_8000_96000),
+	.rate_min		= 8000,
+	.rate_max		= 96000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (128*1024),
+	.period_bytes_min	= (384),
+	.period_bytes_max	= (64*1024),
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.fifo_size		= 0,
+};
+
+static void ct_atc_pcm_interrupt(struct ct_atc_pcm *atc_pcm)
+{
+	struct ct_atc_pcm *apcm = atc_pcm;
+
+	if (NULL == apcm->substream)
+		return;
+
+	snd_pcm_period_elapsed(apcm->substream);
+}
+
+static void ct_atc_pcm_free_substream(struct snd_pcm_runtime *runtime)
+{
+	struct ct_atc_pcm *apcm = runtime->private_data;
+	struct ct_atc *atc = snd_pcm_substream_chip(apcm->substream);
+
+	atc->pcm_release_resources(atc, apcm);
+	ct_timer_instance_free(apcm->timer);
+	kfree(apcm);
+	runtime->private_data = NULL;
+}
+
+/* pcm playback operations */
+static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm;
+	int err;
+
+	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
+	if (NULL == apcm)
+		return -ENOMEM;
+
+	apcm->substream = substream;
+	apcm->interrupt = ct_atc_pcm_interrupt;
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
+	if (IEC958 == substream->pcm->device) {
+		runtime->hw = ct_spdif_passthru_playback_hw;
+		atc->spdif_out_passthru(atc, 1);
+	} else {
+		runtime->hw = ct_pcm_playback_hw;
+		if (FRONT == substream->pcm->device)
+			runtime->hw.channels_max = 8;
+	}
+
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					   1024, UINT_MAX);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+
+	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
+	if (!apcm->timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int ct_pcm_playback_close(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+
+	/* TODO: Notify mixer inactive. */
+	if (IEC958 == substream->pcm->device)
+		atc->spdif_out_passthru(atc, 0);
+
+	/* The ct_atc_pcm object will be freed by runtime->private_free */
+
+	return 0;
+}
+
+static int ct_pcm_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *hw_params)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct ct_atc_pcm *apcm = substream->runtime->private_data;
+	int err;
+
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+	if (err < 0)
+		return err;
+	/* clear previous resources */
+	atc->pcm_release_resources(atc, apcm);
+	return err;
+}
+
+static int ct_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct ct_atc_pcm *apcm = substream->runtime->private_data;
+
+	/* clear previous resources */
+	atc->pcm_release_resources(atc, apcm);
+	/* Free snd-allocated pages */
+	return snd_pcm_lib_free_pages(substream);
+}
+
+
+static int ct_pcm_playback_prepare(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	if (IEC958 == substream->pcm->device)
+		err = atc->spdif_passthru_playback_prepare(atc, apcm);
+	else
+		err = atc->pcm_playback_prepare(atc, apcm);
+
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: Preparing pcm playback failed!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int
+ct_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		atc->pcm_playback_start(atc, apcm);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		atc->pcm_playback_stop(atc, apcm);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+ct_pcm_playback_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long position;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	/* Read out playback position */
+	position = atc->pcm_playback_position(atc, apcm);
+	position = bytes_to_frames(runtime, position);
+	if (position >= runtime->buffer_size)
+		position = 0;
+	return position;
+}
+
+/* pcm capture operations */
+static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm;
+	int err;
+
+	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
+	if (NULL == apcm)
+		return -ENOMEM;
+
+	apcm->started = 0;
+	apcm->substream = substream;
+	apcm->interrupt = ct_atc_pcm_interrupt;
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
+	runtime->hw = ct_pcm_capture_hw;
+	runtime->hw.rate_max = atc->rsr * atc->msr;
+
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					   1024, UINT_MAX);
+	if (err < 0) {
+		kfree(apcm);
+		return err;
+	}
+
+	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
+	if (!apcm->timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int ct_pcm_capture_close(struct snd_pcm_substream *substream)
+{
+	/* The ct_atc_pcm object will be freed by runtime->private_free */
+	/* TODO: Notify mixer inactive. */
+	return 0;
+}
+
+static int ct_pcm_capture_prepare(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	err = atc->pcm_capture_prepare(atc, apcm);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: Preparing pcm capture failed!!!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int
+ct_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		atc->pcm_capture_start(atc, apcm);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		atc->pcm_capture_stop(atc, apcm);
+		break;
+	default:
+		atc->pcm_capture_stop(atc, apcm);
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+ct_pcm_capture_pointer(struct snd_pcm_substream *substream)
+{
+	unsigned long position;
+	struct ct_atc *atc = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = runtime->private_data;
+
+	/* Read out playback position */
+	position = atc->pcm_capture_position(atc, apcm);
+	position = bytes_to_frames(runtime, position);
+	if (position >= runtime->buffer_size)
+		position = 0;
+	return position;
+}
+
+/* PCM operators for playback */
+static struct snd_pcm_ops ct_pcm_playback_ops = {
+	.open	 	= ct_pcm_playback_open,
+	.close		= ct_pcm_playback_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ct_pcm_hw_params,
+	.hw_free	= ct_pcm_hw_free,
+	.prepare	= ct_pcm_playback_prepare,
+	.trigger	= ct_pcm_playback_trigger,
+	.pointer	= ct_pcm_playback_pointer,
+	.page		= snd_pcm_sgbuf_ops_page,
+};
+
+/* PCM operators for capture */
+static struct snd_pcm_ops ct_pcm_capture_ops = {
+	.open	 	= ct_pcm_capture_open,
+	.close		= ct_pcm_capture_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ct_pcm_hw_params,
+	.hw_free	= ct_pcm_hw_free,
+	.prepare	= ct_pcm_capture_prepare,
+	.trigger	= ct_pcm_capture_trigger,
+	.pointer	= ct_pcm_capture_pointer,
+	.page		= snd_pcm_sgbuf_ops_page,
+};
+
+/* Create ALSA pcm device */
+int ct_alsa_pcm_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name)
+{
+	struct snd_pcm *pcm;
+	int err;
+	int playback_count, capture_count;
+
+	playback_count = (IEC958 == device) ? 1 : 8;
+	capture_count = (FRONT == device) ? 1 : 0;
+	err = snd_pcm_new(atc->card, "ctxfi", device,
+			  playback_count, capture_count, &pcm);
+	if (err < 0) {
+		printk(KERN_ERR "ctxfi: snd_pcm_new failed!! Err=%d\n", err);
+		return err;
+	}
+
+	pcm->private_data = atc;
+	pcm->info_flags = 0;
+	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
+	strlcpy(pcm->name, device_name, sizeof(pcm->name));
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &ct_pcm_playback_ops);
+
+	if (FRONT == device)
+		snd_pcm_set_ops(pcm,
+				SNDRV_PCM_STREAM_CAPTURE, &ct_pcm_capture_ops);
+
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
+			snd_dma_pci_data(atc->pci), 128*1024, 128*1024);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctpcm.h b/sound/pci/ctxfi/ctpcm.h
new file mode 100644
index 00000000000..178da0dca64
--- /dev/null
+++ b/sound/pci/ctxfi/ctpcm.h
@@ -0,0 +1,27 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctpcm.h
+ *
+ * @Brief
+ * This file contains the definition of the pcm device functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	Mar 28 2008
+ *
+ */
+
+#ifndef CTPCM_H
+#define CTPCM_H
+
+#include "ctatc.h"
+
+int ct_alsa_pcm_create(struct ct_atc *atc,
+		       enum CTALSADEVS device,
+		       const char *device_name);
+
+#endif /* CTPCM_H */
diff --git a/sound/pci/ctxfi/ctresource.c b/sound/pci/ctxfi/ctresource.c
new file mode 100644
index 00000000000..889c495bb7d
--- /dev/null
+++ b/sound/pci/ctxfi/ctresource.c
@@ -0,0 +1,301 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctresource.c
+ *
+ * @Brief
+ * This file contains the implementation of some generic helper functions.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 15 2008
+ *
+ */
+
+#include "ctresource.h"
+#include "cthardware.h"
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define AUDIO_SLOT_BLOCK_NUM 	256
+
+/* Resource allocation based on bit-map management mechanism */
+static int
+get_resource(u8 *rscs, unsigned int amount,
+	     unsigned int multi, unsigned int *ridx)
+{
+	int i, j, k, n;
+
+	/* Check whether there are sufficient resources to meet request. */
+	for (i = 0, n = multi; i < amount; i++) {
+		j = i / 8;
+		k = i % 8;
+		if (rscs[j] & ((u8)1 << k)) {
+			n = multi;
+			continue;
+		}
+		if (!(--n))
+			break; /* found sufficient contiguous resources */
+	}
+
+	if (i >= amount) {
+		/* Can not find sufficient contiguous resources */
+		return -ENOENT;
+	}
+
+	/* Mark the contiguous bits in resource bit-map as used */
+	for (n = multi; n > 0; n--) {
+		j = i / 8;
+		k = i % 8;
+		rscs[j] |= ((u8)1 << k);
+		i--;
+	}
+
+	*ridx = i + 1;
+
+	return 0;
+}
+
+static int put_resource(u8 *rscs, unsigned int multi, unsigned int idx)
+{
+	unsigned int i, j, k, n;
+
+	/* Mark the contiguous bits in resource bit-map as used */
+	for (n = multi, i = idx; n > 0; n--) {
+		j = i / 8;
+		k = i % 8;
+		rscs[j] &= ~((u8)1 << k);
+		i++;
+	}
+
+	return 0;
+}
+
+int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx)
+{
+	int err;
+
+	if (n > mgr->avail)
+		return -ENOENT;
+
+	err = get_resource(mgr->rscs, mgr->amount, n, ridx);
+	if (!err)
+		mgr->avail -= n;
+
+	return err;
+}
+
+int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx)
+{
+	put_resource(mgr->rscs, n, idx);
+	mgr->avail += n;
+
+	return 0;
+}
+
+static unsigned char offset_in_audio_slot_block[NUM_RSCTYP] = {
+	/* SRC channel is at Audio Ring slot 1 every 16 slots. */
+	[SRC]		= 0x1,
+	[AMIXER]	= 0x4,
+	[SUM]		= 0xc,
+};
+
+static int rsc_index(const struct rsc *rsc)
+{
+    return rsc->conj;
+}
+
+static int audio_ring_slot(const struct rsc *rsc)
+{
+    return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type];
+}
+
+static int rsc_next_conj(struct rsc *rsc)
+{
+	unsigned int i;
+	for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); )
+		i++;
+	rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i);
+	return rsc->conj;
+}
+
+static int rsc_master(struct rsc *rsc)
+{
+	return rsc->conj = rsc->idx;
+}
+
+static struct rsc_ops rsc_generic_ops = {
+	.index		= rsc_index,
+	.output_slot	= audio_ring_slot,
+	.master		= rsc_master,
+	.next_conj	= rsc_next_conj,
+};
+
+int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw)
+{
+	int err = 0;
+
+	rsc->idx = idx;
+	rsc->conj = idx;
+	rsc->type = type;
+	rsc->msr = msr;
+	rsc->hw = hw;
+	rsc->ops = &rsc_generic_ops;
+	if (NULL == hw) {
+		rsc->ctrl_blk = NULL;
+		return 0;
+	}
+
+	switch (type) {
+	case SRC:
+		err = ((struct hw *)hw)->src_rsc_get_ctrl_blk(&rsc->ctrl_blk);
+		break;
+	case AMIXER:
+		err = ((struct hw *)hw)->
+				amixer_rsc_get_ctrl_blk(&rsc->ctrl_blk);
+		break;
+	case SRCIMP:
+	case SUM:
+	case DAIO:
+		break;
+	default:
+		printk(KERN_ERR
+		       "ctxfi: Invalid resource type value %d!\n", type);
+		return -EINVAL;
+	}
+
+	if (err) {
+		printk(KERN_ERR
+		       "ctxfi: Failed to get resource control block!\n");
+		return err;
+	}
+
+	return 0;
+}
+
+int rsc_uninit(struct rsc *rsc)
+{
+	if ((NULL != rsc->hw) && (NULL != rsc->ctrl_blk)) {
+		switch (rsc->type) {
+		case SRC:
+			((struct hw *)rsc->hw)->
+				src_rsc_put_ctrl_blk(rsc->ctrl_blk);
+			break;
+		case AMIXER:
+			((struct hw *)rsc->hw)->
+				amixer_rsc_put_ctrl_blk(rsc->ctrl_blk);
+			break;
+		case SUM:
+		case DAIO:
+			break;
+		default:
+			printk(KERN_ERR "ctxfi: "
+			       "Invalid resource type value %d!\n", rsc->type);
+			break;
+		}
+
+		rsc->hw = rsc->ctrl_blk = NULL;
+	}
+
+	rsc->idx = rsc->conj = 0;
+	rsc->type = NUM_RSCTYP;
+	rsc->msr = 0;
+
+	return 0;
+}
+
+int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
+		 unsigned int amount, void *hw_obj)
+{
+	int err = 0;
+	struct hw *hw = hw_obj;
+
+	mgr->type = NUM_RSCTYP;
+
+	mgr->rscs = kzalloc(((amount + 8 - 1) / 8), GFP_KERNEL);
+	if (NULL == mgr->rscs)
+		return -ENOMEM;
+
+	switch (type) {
+	case SRC:
+		err = hw->src_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case SRCIMP:
+		err = hw->srcimp_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case AMIXER:
+		err = hw->amixer_mgr_get_ctrl_blk(&mgr->ctrl_blk);
+		break;
+	case DAIO:
+		err = hw->daio_mgr_get_ctrl_blk(hw, &mgr->ctrl_blk);
+		break;
+	case SUM:
+		break;
+	default:
+		printk(KERN_ERR
+		       "ctxfi: Invalid resource type value %d!\n", type);
+		err = -EINVAL;
+		goto error;
+	}
+
+	if (err) {
+		printk(KERN_ERR
+		       "ctxfi: Failed to get manager control block!\n");
+		goto error;
+	}
+
+	mgr->type = type;
+	mgr->avail = mgr->amount = amount;
+	mgr->hw = hw;
+
+	return 0;
+
+error:
+	kfree(mgr->rscs);
+	return err;
+}
+
+int rsc_mgr_uninit(struct rsc_mgr *mgr)
+{
+	if (NULL != mgr->rscs) {
+		kfree(mgr->rscs);
+		mgr->rscs = NULL;
+	}
+
+	if ((NULL != mgr->hw) && (NULL != mgr->ctrl_blk)) {
+		switch (mgr->type) {
+		case SRC:
+			((struct hw *)mgr->hw)->
+				src_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case SRCIMP:
+			((struct hw *)mgr->hw)->
+				srcimp_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case AMIXER:
+			((struct hw *)mgr->hw)->
+				amixer_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case DAIO:
+			((struct hw *)mgr->hw)->
+				daio_mgr_put_ctrl_blk(mgr->ctrl_blk);
+			break;
+		case SUM:
+			break;
+		default:
+			printk(KERN_ERR "ctxfi: "
+			       "Invalid resource type value %d!\n", mgr->type);
+			break;
+		}
+
+		mgr->hw = mgr->ctrl_blk = NULL;
+	}
+
+	mgr->type = NUM_RSCTYP;
+	mgr->avail = mgr->amount = 0;
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctresource.h b/sound/pci/ctxfi/ctresource.h
new file mode 100644
index 00000000000..0838c2e84f8
--- /dev/null
+++ b/sound/pci/ctxfi/ctresource.h
@@ -0,0 +1,72 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctresource.h
+ *
+ * @Brief
+ * This file contains the definition of generic hardware resources for
+ * resource management.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTRESOURCE_H
+#define CTRESOURCE_H
+
+#include <linux/types.h>
+
+enum RSCTYP {
+	SRC,
+	SRCIMP,
+	AMIXER,
+	SUM,
+	DAIO,
+	NUM_RSCTYP	/* This must be the last one and less than 16 */
+};
+
+struct rsc_ops;
+
+struct rsc {
+	u32 idx:12;	/* The index of a resource */
+	u32 type:4;	/* The type (RSCTYP) of a resource */
+	u32 conj:12;	/* Current conjugate index */
+	u32 msr:4;	/* The Master Sample Rate a resource working on */
+	void *ctrl_blk;	/* Chip specific control info block for a resource */
+	void *hw;	/* Chip specific object for hardware access means */
+	struct rsc_ops *ops;	/* Generic resource operations */
+};
+
+struct rsc_ops {
+	int (*master)(struct rsc *rsc);	/* Move to master resource */
+	int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */
+	int (*index)(const struct rsc *rsc); /* Return the index of resource */
+	/* Return the output slot number */
+	int (*output_slot)(const struct rsc *rsc);
+};
+
+int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw);
+int rsc_uninit(struct rsc *rsc);
+
+struct rsc_mgr {
+	enum RSCTYP type; /* The type (RSCTYP) of resource to manage */
+	unsigned int amount; /* The total amount of a kind of resource */
+	unsigned int avail; /* The amount of currently available resources */
+	unsigned char *rscs; /* The bit-map for resource allocation */
+	void *ctrl_blk; /* Chip specific control info block */
+	void *hw; /* Chip specific object for hardware access */
+};
+
+/* Resource management is based on bit-map mechanism */
+int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
+		 unsigned int amount, void *hw);
+int rsc_mgr_uninit(struct rsc_mgr *mgr);
+int mgr_get_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int *ridx);
+int mgr_put_resource(struct rsc_mgr *mgr, unsigned int n, unsigned int idx);
+
+#endif /* CTRESOURCE_H */
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
new file mode 100644
index 00000000000..e1c145d8b70
--- /dev/null
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -0,0 +1,886 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctsrc.c
+ *
+ * @Brief
+ * This file contains the implementation of the Sample Rate Convertor
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#include "ctsrc.h"
+#include "cthardware.h"
+#include <linux/slab.h>
+
+#define SRC_RESOURCE_NUM	64
+#define SRCIMP_RESOURCE_NUM	256
+
+static unsigned int conj_mask;
+
+static int src_default_config_memrd(struct src *src);
+static int src_default_config_memwr(struct src *src);
+static int src_default_config_arcrw(struct src *src);
+
+static int (*src_default_config[3])(struct src *) = {
+	[MEMRD] = src_default_config_memrd,
+	[MEMWR] = src_default_config_memwr,
+	[ARCRW] = src_default_config_arcrw
+};
+
+static int src_set_state(struct src *src, unsigned int state)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_state(src->rsc.ctrl_blk, state);
+
+	return 0;
+}
+
+static int src_set_bm(struct src *src, unsigned int bm)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_bm(src->rsc.ctrl_blk, bm);
+
+	return 0;
+}
+
+static int src_set_sf(struct src *src, unsigned int sf)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_sf(src->rsc.ctrl_blk, sf);
+
+	return 0;
+}
+
+static int src_set_pm(struct src *src, unsigned int pm)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_pm(src->rsc.ctrl_blk, pm);
+
+	return 0;
+}
+
+static int src_set_rom(struct src *src, unsigned int rom)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_rom(src->rsc.ctrl_blk, rom);
+
+	return 0;
+}
+
+static int src_set_vo(struct src *src, unsigned int vo)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_vo(src->rsc.ctrl_blk, vo);
+
+	return 0;
+}
+
+static int src_set_st(struct src *src, unsigned int st)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_st(src->rsc.ctrl_blk, st);
+
+	return 0;
+}
+
+static int src_set_bp(struct src *src, unsigned int bp)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_bp(src->rsc.ctrl_blk, bp);
+
+	return 0;
+}
+
+static int src_set_cisz(struct src *src, unsigned int cisz)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_cisz(src->rsc.ctrl_blk, cisz);
+
+	return 0;
+}
+
+static int src_set_ca(struct src *src, unsigned int ca)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_ca(src->rsc.ctrl_blk, ca);
+
+	return 0;
+}
+
+static int src_set_sa(struct src *src, unsigned int sa)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_sa(src->rsc.ctrl_blk, sa);
+
+	return 0;
+}
+
+static int src_set_la(struct src *src, unsigned int la)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_la(src->rsc.ctrl_blk, la);
+
+	return 0;
+}
+
+static int src_set_pitch(struct src *src, unsigned int pitch)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_pitch(src->rsc.ctrl_blk, pitch);
+
+	return 0;
+}
+
+static int src_set_clear_zbufs(struct src *src)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	return 0;
+}
+
+static int src_commit_write(struct src *src)
+{
+	struct hw *hw;
+	int i;
+	unsigned int dirty = 0;
+
+	hw = src->rsc.hw;
+	src->rsc.ops->master(&src->rsc);
+	if (src->rsc.msr > 1) {
+		/* Save dirty flags for conjugate resource programming */
+		dirty = hw->src_get_dirty(src->rsc.ctrl_blk) & conj_mask;
+	}
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	/* Program conjugate parameter mixer resources */
+	if (MEMWR == src->mode)
+		return 0;
+
+	for (i = 1; i < src->rsc.msr; i++) {
+		src->rsc.ops->next_conj(&src->rsc);
+		hw->src_set_dirty(src->rsc.ctrl_blk, dirty);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_get_ca(struct src *src)
+{
+	struct hw *hw;
+
+	hw = src->rsc.hw;
+	return hw->src_get_ca(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+}
+
+static int src_init(struct src *src)
+{
+	src_default_config[src->mode](src);
+
+	return 0;
+}
+
+static struct src *src_next_interleave(struct src *src)
+{
+	return src->intlv;
+}
+
+static int src_default_config_memrd(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+	unsigned int rsr, msr;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 1);
+	for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->src_set_rsr(src->rsc.ctrl_blk, rsr);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16);
+	hw->src_set_wr(src->rsc.ctrl_blk, 0);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, src->multi - 1);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	src->rsc.ops->master(&src->rsc);
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	for (msr = 1; msr < src->rsc.msr; msr++) {
+		src->rsc.ops->next_conj(&src->rsc);
+		hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_default_config_memwr(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 1);
+	hw->src_set_rsr(src->rsc.ctrl_blk, 0);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_S16);
+	hw->src_set_wr(src->rsc.ctrl_blk, 1);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, 0);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	src->rsc.ops->master(&src->rsc);
+	hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+						src->rsc.ctrl_blk);
+
+	return 0;
+}
+
+static int src_default_config_arcrw(struct src *src)
+{
+	struct hw *hw = src->rsc.hw;
+	unsigned int rsr, msr;
+	unsigned int dirty;
+
+	hw->src_set_state(src->rsc.ctrl_blk, SRC_STATE_OFF);
+	hw->src_set_bm(src->rsc.ctrl_blk, 0);
+	for (rsr = 0, msr = src->rsc.msr; msr > 1; msr >>= 1)
+		rsr++;
+
+	hw->src_set_rsr(src->rsc.ctrl_blk, rsr);
+	hw->src_set_sf(src->rsc.ctrl_blk, SRC_SF_F32);
+	hw->src_set_wr(src->rsc.ctrl_blk, 0);
+	hw->src_set_pm(src->rsc.ctrl_blk, 0);
+	hw->src_set_rom(src->rsc.ctrl_blk, 0);
+	hw->src_set_vo(src->rsc.ctrl_blk, 0);
+	hw->src_set_st(src->rsc.ctrl_blk, 0);
+	hw->src_set_ilsz(src->rsc.ctrl_blk, 0);
+	hw->src_set_cisz(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_sa(src->rsc.ctrl_blk, 0x0);
+	/*hw->src_set_sa(src->rsc.ctrl_blk, 0x100);*/
+	hw->src_set_la(src->rsc.ctrl_blk, 0x1000);
+	/*hw->src_set_la(src->rsc.ctrl_blk, 0x03ffffe0);*/
+	hw->src_set_ca(src->rsc.ctrl_blk, 0x80);
+	hw->src_set_pitch(src->rsc.ctrl_blk, 0x1000000);
+	hw->src_set_clear_zbufs(src->rsc.ctrl_blk, 1);
+
+	dirty = hw->src_get_dirty(src->rsc.ctrl_blk);
+	src->rsc.ops->master(&src->rsc);
+	for (msr = 0; msr < src->rsc.msr; msr++) {
+		hw->src_set_dirty(src->rsc.ctrl_blk, dirty);
+		hw->src_commit_write(hw, src->rsc.ops->index(&src->rsc),
+							src->rsc.ctrl_blk);
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static struct src_rsc_ops src_rsc_ops = {
+	.set_state		= src_set_state,
+	.set_bm			= src_set_bm,
+	.set_sf			= src_set_sf,
+	.set_pm			= src_set_pm,
+	.set_rom		= src_set_rom,
+	.set_vo			= src_set_vo,
+	.set_st			= src_set_st,
+	.set_bp			= src_set_bp,
+	.set_cisz		= src_set_cisz,
+	.set_ca			= src_set_ca,
+	.set_sa			= src_set_sa,
+	.set_la			= src_set_la,
+	.set_pitch		= src_set_pitch,
+	.set_clr_zbufs		= src_set_clear_zbufs,
+	.commit_write		= src_commit_write,
+	.get_ca			= src_get_ca,
+	.init			= src_init,
+	.next_interleave	= src_next_interleave,
+};
+
+static int
+src_rsc_init(struct src *src, u32 idx,
+	     const struct src_desc *desc, struct src_mgr *mgr)
+{
+	int err;
+	int i, n;
+	struct src *p;
+
+	n = (MEMRD == desc->mode) ? desc->multi : 1;
+	for (i = 0, p = src; i < n; i++, p++) {
+		err = rsc_init(&p->rsc, idx + i, SRC, desc->msr, mgr->mgr.hw);
+		if (err)
+			goto error1;
+
+		/* Initialize src specific rsc operations */
+		p->ops = &src_rsc_ops;
+		p->multi = (0 == i) ? desc->multi : 1;
+		p->mode = desc->mode;
+		src_default_config[desc->mode](p);
+		mgr->src_enable(mgr, p);
+		p->intlv = p + 1;
+	}
+	(--p)->intlv = NULL;	/* Set @intlv of the last SRC to NULL */
+
+	mgr->commit_write(mgr);
+
+	return 0;
+
+error1:
+	for (i--, p--; i >= 0; i--, p--) {
+		mgr->src_disable(mgr, p);
+		rsc_uninit(&p->rsc);
+	}
+	mgr->commit_write(mgr);
+	return err;
+}
+
+static int src_rsc_uninit(struct src *src, struct src_mgr *mgr)
+{
+	int i, n;
+	struct src *p;
+
+	n = (MEMRD == src->mode) ? src->multi : 1;
+	for (i = 0, p = src; i < n; i++, p++) {
+		mgr->src_disable(mgr, p);
+		rsc_uninit(&p->rsc);
+		p->multi = 0;
+		p->ops = NULL;
+		p->mode = NUM_SRCMODES;
+		p->intlv = NULL;
+	}
+	mgr->commit_write(mgr);
+
+	return 0;
+}
+
+static int
+get_src_rsc(struct src_mgr *mgr, const struct src_desc *desc, struct src **rsrc)
+{
+	unsigned int idx = SRC_RESOURCE_NUM;
+	int err;
+	struct src *src;
+	unsigned long flags;
+
+	*rsrc = NULL;
+
+	/* Check whether there are sufficient src resources to meet request. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	if (MEMRD == desc->mode)
+		err = mgr_get_resource(&mgr->mgr, desc->multi, &idx);
+	else
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SRC resource request!\n");
+		return err;
+	}
+
+	/* Allocate mem for master src resource */
+	if (MEMRD == desc->mode)
+		src = kzalloc(sizeof(*src)*desc->multi, GFP_KERNEL);
+	else
+		src = kzalloc(sizeof(*src), GFP_KERNEL);
+
+	if (NULL == src) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	err = src_rsc_init(src, idx, desc, mgr);
+	if (err)
+		goto error2;
+
+	*rsrc = src;
+
+	return 0;
+
+error2:
+	kfree(src);
+error1:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	if (MEMRD == desc->mode)
+		mgr_put_resource(&mgr->mgr, desc->multi, idx);
+	else
+		mgr_put_resource(&mgr->mgr, 1, idx);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	return err;
+}
+
+static int put_src_rsc(struct src_mgr *mgr, struct src *src)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	src->rsc.ops->master(&src->rsc);
+	if (MEMRD == src->mode)
+		mgr_put_resource(&mgr->mgr, src->multi,
+				 src->rsc.ops->index(&src->rsc));
+	else
+		mgr_put_resource(&mgr->mgr, 1, src->rsc.ops->index(&src->rsc));
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	src_rsc_uninit(src, mgr);
+	kfree(src);
+
+	return 0;
+}
+
+static int src_enable_s(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_enbs_src(mgr->mgr.ctrl_blk,
+				     src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_enable(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_enb_src(mgr->mgr.ctrl_blk,
+				    src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_disable(struct src_mgr *mgr, struct src *src)
+{
+	struct hw *hw = mgr->mgr.hw;
+	int i;
+
+	src->rsc.ops->master(&src->rsc);
+	for (i = 0; i < src->rsc.msr; i++) {
+		hw->src_mgr_dsb_src(mgr->mgr.ctrl_blk,
+				    src->rsc.ops->index(&src->rsc));
+		src->rsc.ops->next_conj(&src->rsc);
+	}
+	src->rsc.ops->master(&src->rsc);
+
+	return 0;
+}
+
+static int src_mgr_commit_write(struct src_mgr *mgr)
+{
+	struct hw *hw = mgr->mgr.hw;
+
+	hw->src_mgr_commit_write(hw, mgr->mgr.ctrl_blk);
+
+	return 0;
+}
+
+int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr)
+{
+	int err, i;
+	struct src_mgr *src_mgr;
+
+	*rsrc_mgr = NULL;
+	src_mgr = kzalloc(sizeof(*src_mgr), GFP_KERNEL);
+	if (NULL == src_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&src_mgr->mgr, SRC, SRC_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&src_mgr->mgr_lock);
+	conj_mask = ((struct hw *)hw)->src_dirty_conj_mask();
+
+	src_mgr->get_src = get_src_rsc;
+	src_mgr->put_src = put_src_rsc;
+	src_mgr->src_enable_s = src_enable_s;
+	src_mgr->src_enable = src_enable;
+	src_mgr->src_disable = src_disable;
+	src_mgr->commit_write = src_mgr_commit_write;
+
+	/* Disable all SRC resources. */
+	for (i = 0; i < 256; i++)
+		((struct hw *)hw)->src_mgr_dsb_src(src_mgr->mgr.ctrl_blk, i);
+
+	((struct hw *)hw)->src_mgr_commit_write(hw, src_mgr->mgr.ctrl_blk);
+
+	*rsrc_mgr = src_mgr;
+
+	return 0;
+
+error1:
+	kfree(src_mgr);
+	return err;
+}
+
+int src_mgr_destroy(struct src_mgr *src_mgr)
+{
+	rsc_mgr_uninit(&src_mgr->mgr);
+	kfree(src_mgr);
+
+	return 0;
+}
+
+/* SRCIMP resource manager operations */
+
+static int srcimp_master(struct rsc *rsc)
+{
+	rsc->conj = 0;
+	return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0];
+}
+
+static int srcimp_next_conj(struct rsc *rsc)
+{
+	rsc->conj++;
+	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
+}
+
+static int srcimp_index(const struct rsc *rsc)
+{
+	return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj];
+}
+
+static struct rsc_ops srcimp_basic_rsc_ops = {
+	.master		= srcimp_master,
+	.next_conj	= srcimp_next_conj,
+	.index		= srcimp_index,
+	.output_slot	= NULL,
+};
+
+static int srcimp_map(struct srcimp *srcimp, struct src *src, struct rsc *input)
+{
+	struct imapper *entry;
+	int i;
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+	src->rsc.ops->master(&src->rsc);
+	input->ops->master(input);
+
+	/* Program master and conjugate resources */
+	for (i = 0; i < srcimp->rsc.msr; i++) {
+		entry = &srcimp->imappers[i];
+		entry->slot = input->ops->output_slot(input);
+		entry->user = src->rsc.ops->index(&src->rsc);
+		entry->addr = srcimp->rsc.ops->index(&srcimp->rsc);
+		srcimp->mgr->imap_add(srcimp->mgr, entry);
+		srcimp->mapped |= (0x1 << i);
+
+		srcimp->rsc.ops->next_conj(&srcimp->rsc);
+		input->ops->next_conj(input);
+	}
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+	input->ops->master(input);
+
+	return 0;
+}
+
+static int srcimp_unmap(struct srcimp *srcimp)
+{
+	int i;
+
+	/* Program master and conjugate resources */
+	for (i = 0; i < srcimp->rsc.msr; i++) {
+		if (srcimp->mapped & (0x1 << i)) {
+			srcimp->mgr->imap_delete(srcimp->mgr,
+						 &srcimp->imappers[i]);
+			srcimp->mapped &= ~(0x1 << i);
+		}
+	}
+
+	return 0;
+}
+
+static struct srcimp_rsc_ops srcimp_ops = {
+	.map = srcimp_map,
+	.unmap = srcimp_unmap
+};
+
+static int srcimp_rsc_init(struct srcimp *srcimp,
+			   const struct srcimp_desc *desc,
+			   struct srcimp_mgr *mgr)
+{
+	int err;
+
+	err = rsc_init(&srcimp->rsc, srcimp->idx[0],
+		       SRCIMP, desc->msr, mgr->mgr.hw);
+	if (err)
+		return err;
+
+	/* Reserve memory for imapper nodes */
+	srcimp->imappers = kzalloc(sizeof(struct imapper)*desc->msr,
+				   GFP_KERNEL);
+	if (NULL == srcimp->imappers) {
+		err = -ENOMEM;
+		goto error1;
+	}
+
+	/* Set srcimp specific operations */
+	srcimp->rsc.ops = &srcimp_basic_rsc_ops;
+	srcimp->ops = &srcimp_ops;
+	srcimp->mgr = mgr;
+
+	srcimp->rsc.ops->master(&srcimp->rsc);
+
+	return 0;
+
+error1:
+	rsc_uninit(&srcimp->rsc);
+	return err;
+}
+
+static int srcimp_rsc_uninit(struct srcimp *srcimp)
+{
+	if (NULL != srcimp->imappers) {
+		kfree(srcimp->imappers);
+		srcimp->imappers = NULL;
+	}
+	srcimp->ops = NULL;
+	srcimp->mgr = NULL;
+	rsc_uninit(&srcimp->rsc);
+
+	return 0;
+}
+
+static int get_srcimp_rsc(struct srcimp_mgr *mgr,
+			  const struct srcimp_desc *desc,
+			  struct srcimp **rsrcimp)
+{
+	int err, i;
+	unsigned int idx;
+	struct srcimp *srcimp;
+	unsigned long flags;
+
+	*rsrcimp = NULL;
+
+	/* Allocate mem for SRCIMP resource */
+	srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
+	if (NULL == srcimp) {
+		err = -ENOMEM;
+		return err;
+	}
+
+	/* Check whether there are sufficient SRCIMP resources. */
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < desc->msr; i++) {
+		err = mgr_get_resource(&mgr->mgr, 1, &idx);
+		if (err)
+			break;
+
+		srcimp->idx[i] = idx;
+	}
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	if (err) {
+		printk(KERN_ERR "ctxfi: Can't meet SRCIMP resource request!\n");
+		goto error1;
+	}
+
+	err = srcimp_rsc_init(srcimp, desc, mgr);
+	if (err)
+		goto error1;
+
+	*rsrcimp = srcimp;
+
+	return 0;
+
+error1:
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i--; i >= 0; i--)
+		mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	kfree(srcimp);
+	return err;
+}
+
+static int put_srcimp_rsc(struct srcimp_mgr *mgr, struct srcimp *srcimp)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mgr->mgr_lock, flags);
+	for (i = 0; i < srcimp->rsc.msr; i++)
+		mgr_put_resource(&mgr->mgr, 1, srcimp->idx[i]);
+
+	spin_unlock_irqrestore(&mgr->mgr_lock, flags);
+	srcimp_rsc_uninit(srcimp);
+	kfree(srcimp);
+
+	return 0;
+}
+
+static int srcimp_map_op(void *data, struct imapper *entry)
+{
+	struct rsc_mgr *mgr = &((struct srcimp_mgr *)data)->mgr;
+	struct hw *hw = mgr->hw;
+
+	hw->srcimp_mgr_set_imaparc(mgr->ctrl_blk, entry->slot);
+	hw->srcimp_mgr_set_imapuser(mgr->ctrl_blk, entry->user);
+	hw->srcimp_mgr_set_imapnxt(mgr->ctrl_blk, entry->next);
+	hw->srcimp_mgr_set_imapaddr(mgr->ctrl_blk, entry->addr);
+	hw->srcimp_mgr_commit_write(mgr->hw, mgr->ctrl_blk);
+
+	return 0;
+}
+
+static int srcimp_imap_add(struct srcimp_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	if ((0 == entry->addr) && (mgr->init_imap_added)) {
+		input_mapper_delete(&mgr->imappers,
+				    mgr->init_imap, srcimp_map_op, mgr);
+		mgr->init_imap_added = 0;
+	}
+	err = input_mapper_add(&mgr->imappers, entry, srcimp_map_op, mgr);
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+static int srcimp_imap_delete(struct srcimp_mgr *mgr, struct imapper *entry)
+{
+	unsigned long flags;
+	int err;
+
+	spin_lock_irqsave(&mgr->imap_lock, flags);
+	err = input_mapper_delete(&mgr->imappers, entry, srcimp_map_op, mgr);
+	if (list_empty(&mgr->imappers)) {
+		input_mapper_add(&mgr->imappers, mgr->init_imap,
+				 srcimp_map_op, mgr);
+		mgr->init_imap_added = 1;
+	}
+	spin_unlock_irqrestore(&mgr->imap_lock, flags);
+
+	return err;
+}
+
+int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrcimp_mgr)
+{
+	int err;
+	struct srcimp_mgr *srcimp_mgr;
+	struct imapper *entry;
+
+	*rsrcimp_mgr = NULL;
+	srcimp_mgr = kzalloc(sizeof(*srcimp_mgr), GFP_KERNEL);
+	if (NULL == srcimp_mgr)
+		return -ENOMEM;
+
+	err = rsc_mgr_init(&srcimp_mgr->mgr, SRCIMP, SRCIMP_RESOURCE_NUM, hw);
+	if (err)
+		goto error1;
+
+	spin_lock_init(&srcimp_mgr->mgr_lock);
+	spin_lock_init(&srcimp_mgr->imap_lock);
+	INIT_LIST_HEAD(&srcimp_mgr->imappers);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (NULL == entry) {
+		err = -ENOMEM;
+		goto error2;
+	}
+	entry->slot = entry->addr = entry->next = entry->user = 0;
+	list_add(&entry->list, &srcimp_mgr->imappers);
+	srcimp_mgr->init_imap = entry;
+	srcimp_mgr->init_imap_added = 1;
+
+	srcimp_mgr->get_srcimp = get_srcimp_rsc;
+	srcimp_mgr->put_srcimp = put_srcimp_rsc;
+	srcimp_mgr->imap_add = srcimp_imap_add;
+	srcimp_mgr->imap_delete = srcimp_imap_delete;
+
+	*rsrcimp_mgr = srcimp_mgr;
+
+	return 0;
+
+error2:
+	rsc_mgr_uninit(&srcimp_mgr->mgr);
+error1:
+	kfree(srcimp_mgr);
+	return err;
+}
+
+int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr)
+{
+	unsigned long flags;
+
+	/* free src input mapper list */
+	spin_lock_irqsave(&srcimp_mgr->imap_lock, flags);
+	free_input_mapper_list(&srcimp_mgr->imappers);
+	spin_unlock_irqrestore(&srcimp_mgr->imap_lock, flags);
+
+	rsc_mgr_uninit(&srcimp_mgr->mgr);
+	kfree(srcimp_mgr);
+
+	return 0;
+}
diff --git a/sound/pci/ctxfi/ctsrc.h b/sound/pci/ctxfi/ctsrc.h
new file mode 100644
index 00000000000..259366aabca
--- /dev/null
+++ b/sound/pci/ctxfi/ctsrc.h
@@ -0,0 +1,149 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File	ctsrc.h
+ *
+ * @Brief
+ * This file contains the definition of the Sample Rate Convertor
+ * resource management object.
+ *
+ * @Author	Liu Chun
+ * @Date 	May 13 2008
+ *
+ */
+
+#ifndef CTSRC_H
+#define CTSRC_H
+
+#include "ctresource.h"
+#include "ctimap.h"
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#define SRC_STATE_OFF	0x0
+#define SRC_STATE_INIT	0x4
+#define SRC_STATE_RUN	0x5
+
+#define SRC_SF_U8	0x0
+#define SRC_SF_S16	0x1
+#define SRC_SF_S24	0x2
+#define SRC_SF_S32	0x3
+#define SRC_SF_F32	0x4
+
+/* Define the descriptor of a src resource */
+enum SRCMODE {
+	MEMRD,		/* Read data from host memory */
+	MEMWR,		/* Write data to host memory */
+	ARCRW,		/* Read from and write to audio ring channel */
+	NUM_SRCMODES
+};
+
+struct src_rsc_ops;
+
+struct src {
+	struct rsc rsc; /* Basic resource info */
+	struct src *intlv; /* Pointer to next interleaved SRC in a series */
+	struct src_rsc_ops *ops; /* SRC specific operations */
+	/* Number of contiguous srcs for interleaved usage */
+	unsigned char multi;
+	unsigned char mode; /* Working mode of this SRC resource */
+};
+
+struct src_rsc_ops {
+	int (*set_state)(struct src *src, unsigned int state);
+	int (*set_bm)(struct src *src, unsigned int bm);
+	int (*set_sf)(struct src *src, unsigned int sf);
+	int (*set_pm)(struct src *src, unsigned int pm);
+	int (*set_rom)(struct src *src, unsigned int rom);
+	int (*set_vo)(struct src *src, unsigned int vo);
+	int (*set_st)(struct src *src, unsigned int st);
+	int (*set_bp)(struct src *src, unsigned int bp);
+	int (*set_cisz)(struct src *src, unsigned int cisz);
+	int (*set_ca)(struct src *src, unsigned int ca);
+	int (*set_sa)(struct src *src, unsigned int sa);
+	int (*set_la)(struct src *src, unsigned int la);
+	int (*set_pitch)(struct src *src, unsigned int pitch);
+	int (*set_clr_zbufs)(struct src *src);
+	int (*commit_write)(struct src *src);
+	int (*get_ca)(struct src *src);
+	int (*init)(struct src *src);
+	struct src* (*next_interleave)(struct src *src);
+};
+
+/* Define src resource request description info */
+struct src_desc {
+	/* Number of contiguous master srcs for interleaved usage */
+	unsigned char multi;
+	unsigned char msr;
+	unsigned char mode; /* Working mode of the requested srcs */
+};
+
+/* Define src manager object */
+struct src_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+
+	 /* request src resource */
+	int (*get_src)(struct src_mgr *mgr,
+		       const struct src_desc *desc, struct src **rsrc);
+	/* return src resource */
+	int (*put_src)(struct src_mgr *mgr, struct src *src);
+	int (*src_enable_s)(struct src_mgr *mgr, struct src *src);
+	int (*src_enable)(struct src_mgr *mgr, struct src *src);
+	int (*src_disable)(struct src_mgr *mgr, struct src *src);
+	int (*commit_write)(struct src_mgr *mgr);
+};
+
+/* Define the descriptor of a SRC Input Mapper resource */
+struct srcimp_mgr;
+struct srcimp_rsc_ops;
+
+struct srcimp {
+	struct rsc rsc;
+	unsigned char idx[8];
+	struct imapper *imappers;
+	unsigned int mapped; /* A bit-map indicating which conj rsc is mapped */
+	struct srcimp_mgr *mgr;
+	struct srcimp_rsc_ops *ops;
+};
+
+struct srcimp_rsc_ops {
+	int (*map)(struct srcimp *srcimp, struct src *user, struct rsc *input);
+	int (*unmap)(struct srcimp *srcimp);
+};
+
+/* Define SRCIMP resource request description info */
+struct srcimp_desc {
+	unsigned int msr;
+};
+
+struct srcimp_mgr {
+	struct rsc_mgr mgr;	/* Basic resource manager info */
+	spinlock_t mgr_lock;
+	spinlock_t imap_lock;
+	struct list_head imappers;
+	struct imapper *init_imap;
+	unsigned int init_imap_added;
+
+	 /* request srcimp resource */
+	int (*get_srcimp)(struct srcimp_mgr *mgr,
+			  const struct srcimp_desc *desc,
+			  struct srcimp **rsrcimp);
+	/* return srcimp resource */
+	int (*put_srcimp)(struct srcimp_mgr *mgr, struct srcimp *srcimp);
+	int (*imap_add)(struct srcimp_mgr *mgr, struct imapper *entry);
+	int (*imap_delete)(struct srcimp_mgr *mgr, struct imapper *entry);
+};
+
+/* Constructor and destructor of SRC resource manager */
+int src_mgr_create(void *hw, struct src_mgr **rsrc_mgr);
+int src_mgr_destroy(struct src_mgr *src_mgr);
+/* Constructor and destructor of SRCIMP resource manager */
+int srcimp_mgr_create(void *hw, struct srcimp_mgr **rsrc_mgr);
+int srcimp_mgr_destroy(struct srcimp_mgr *srcimp_mgr);
+
+#endif /* CTSRC_H */
diff --git a/sound/pci/ctxfi/cttimer.c b/sound/pci/ctxfi/cttimer.c
new file mode 100644
index 00000000000..779c6c3591a
--- /dev/null
+++ b/sound/pci/ctxfi/cttimer.c
@@ -0,0 +1,441 @@
+/*
+ * PCM timer handling on ctxfi
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#include <linux/slab.h>
+#include <linux/math64.h>
+#include <linux/moduleparam.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include "ctatc.h"
+#include "cthardware.h"
+#include "cttimer.h"
+
+static int use_system_timer;
+MODULE_PARM_DESC(use_system_timer, "Foce to use system-timer");
+module_param(use_system_timer, bool, S_IRUGO);
+
+struct ct_timer_ops {
+	void (*init)(struct ct_timer_instance *);
+	void (*prepare)(struct ct_timer_instance *);
+	void (*start)(struct ct_timer_instance *);
+	void (*stop)(struct ct_timer_instance *);
+	void (*free_instance)(struct ct_timer_instance *);
+	void (*interrupt)(struct ct_timer *);
+	void (*free_global)(struct ct_timer *);
+};
+
+/* timer instance -- assigned to each PCM stream */
+struct ct_timer_instance {
+	spinlock_t lock;
+	struct ct_timer *timer_base;
+	struct ct_atc_pcm *apcm;
+	struct snd_pcm_substream *substream;
+	struct timer_list timer;
+	struct list_head instance_list;
+	struct list_head running_list;
+	unsigned int position;
+	unsigned int frag_count;
+	unsigned int running:1;
+	unsigned int need_update:1;
+};
+
+/* timer instance manager */
+struct ct_timer {
+	spinlock_t lock;		/* global timer lock (for xfitimer) */
+	spinlock_t list_lock;		/* lock for instance list */
+	struct ct_atc *atc;
+	struct ct_timer_ops *ops;
+	struct list_head instance_head;
+	struct list_head running_head;
+	unsigned int wc;		/* current wallclock */
+	unsigned int irq_handling:1;	/* in IRQ handling */
+	unsigned int reprogram:1;	/* need to reprogram the internval */
+	unsigned int running:1;		/* global timer running */
+};
+
+
+/*
+ * system-timer-based updates
+ */
+
+static void ct_systimer_callback(unsigned long data)
+{
+	struct ct_timer_instance *ti = (struct ct_timer_instance *)data;
+	struct snd_pcm_substream *substream = ti->substream;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ct_atc_pcm *apcm = ti->apcm;
+	unsigned int period_size = runtime->period_size;
+	unsigned int buffer_size = runtime->buffer_size;
+	unsigned long flags;
+	unsigned int position, dist, interval;
+
+	position = substream->ops->pointer(substream);
+	dist = (position + buffer_size - ti->position) % buffer_size;
+	if (dist >= period_size ||
+	    position / period_size != ti->position / period_size) {
+		apcm->interrupt(apcm);
+		ti->position = position;
+	}
+	/* Add extra HZ*5/1000 to avoid overrun issue when recording
+	 * at 8kHz in 8-bit format or at 88kHz in 24-bit format. */
+	interval = ((period_size - (position % period_size))
+		   * HZ + (runtime->rate - 1)) / runtime->rate + HZ * 5 / 1000;
+	spin_lock_irqsave(&ti->lock, flags);
+	if (ti->running)
+		mod_timer(&ti->timer, jiffies + interval);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_init(struct ct_timer_instance *ti)
+{
+	setup_timer(&ti->timer, ct_systimer_callback,
+		    (unsigned long)ti);
+}
+
+static void ct_systimer_start(struct ct_timer_instance *ti)
+{
+	struct snd_pcm_runtime *runtime = ti->substream->runtime;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ti->lock, flags);
+	ti->running = 1;
+	mod_timer(&ti->timer,
+		  jiffies + (runtime->period_size * HZ +
+			     (runtime->rate - 1)) / runtime->rate);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_stop(struct ct_timer_instance *ti)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ti->lock, flags);
+	ti->running = 0;
+	del_timer(&ti->timer);
+	spin_unlock_irqrestore(&ti->lock, flags);
+}
+
+static void ct_systimer_prepare(struct ct_timer_instance *ti)
+{
+	ct_systimer_stop(ti);
+	try_to_del_timer_sync(&ti->timer);
+}
+
+#define ct_systimer_free	ct_systimer_prepare
+
+static struct ct_timer_ops ct_systimer_ops = {
+	.init = ct_systimer_init,
+	.free_instance = ct_systimer_free,
+	.prepare = ct_systimer_prepare,
+	.start = ct_systimer_start,
+	.stop = ct_systimer_stop,
+};
+
+
+/*
+ * Handling multiple streams using a global emu20k1 timer irq
+ */
+
+#define CT_TIMER_FREQ	48000
+#define MIN_TICKS	1
+#define MAX_TICKS	((1 << 13) - 1)
+
+static void ct_xfitimer_irq_rearm(struct ct_timer *atimer, int ticks)
+{
+	struct hw *hw = atimer->atc->hw;
+	if (ticks > MAX_TICKS)
+		ticks = MAX_TICKS;
+	hw->set_timer_tick(hw, ticks);
+	if (!atimer->running)
+		hw->set_timer_irq(hw, 1);
+	atimer->running = 1;
+}
+
+static void ct_xfitimer_irq_stop(struct ct_timer *atimer)
+{
+	if (atimer->running) {
+		struct hw *hw = atimer->atc->hw;
+		hw->set_timer_irq(hw, 0);
+		hw->set_timer_tick(hw, 0);
+		atimer->running = 0;
+	}
+}
+
+static inline unsigned int ct_xfitimer_get_wc(struct ct_timer *atimer)
+{
+	struct hw *hw = atimer->atc->hw;
+	return hw->get_wc(hw);
+}
+
+/*
+ * reprogram the timer interval;
+ * checks the running instance list and determines the next timer interval.
+ * also updates the each stream position, returns the number of streams
+ * to call snd_pcm_period_elapsed() appropriately
+ *
+ * call this inside the lock and irq disabled
+ */
+static int ct_xfitimer_reprogram(struct ct_timer *atimer)
+{
+	struct ct_timer_instance *ti;
+	unsigned int min_intr = (unsigned int)-1;
+	int updates = 0;
+	unsigned int wc, diff;
+
+	if (list_empty(&atimer->running_head)) {
+		ct_xfitimer_irq_stop(atimer);
+		atimer->reprogram = 0; /* clear flag */
+		return 0;
+	}
+
+	wc = ct_xfitimer_get_wc(atimer);
+	diff = wc - atimer->wc;
+	atimer->wc = wc;
+	list_for_each_entry(ti, &atimer->running_head, running_list) {
+		if (ti->frag_count > diff)
+			ti->frag_count -= diff;
+		else {
+			unsigned int pos;
+			unsigned int period_size, rate;
+
+			period_size = ti->substream->runtime->period_size;
+			rate = ti->substream->runtime->rate;
+			pos = ti->substream->ops->pointer(ti->substream);
+			if (pos / period_size != ti->position / period_size) {
+				ti->need_update = 1;
+				ti->position = pos;
+				updates++;
+			}
+			pos %= period_size;
+			pos = period_size - pos;
+			ti->frag_count = div_u64((u64)pos * CT_TIMER_FREQ +
+						 rate - 1, rate);
+		}
+		if (ti->frag_count < min_intr)
+			min_intr = ti->frag_count;
+	}
+
+	if (min_intr < MIN_TICKS)
+		min_intr = MIN_TICKS;
+	ct_xfitimer_irq_rearm(atimer, min_intr);
+	atimer->reprogram = 0; /* clear flag */
+	return updates;
+}
+
+/* look through the instance list and call period_elapsed if needed */
+static void ct_xfitimer_check_period(struct ct_timer *atimer)
+{
+	struct ct_timer_instance *ti;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->list_lock, flags);
+	list_for_each_entry(ti, &atimer->instance_head, instance_list) {
+		if (ti->need_update) {
+			ti->need_update = 0;
+			ti->apcm->interrupt(ti->apcm);
+		}
+	}
+	spin_unlock_irqrestore(&atimer->list_lock, flags);
+}
+
+/* Handle timer-interrupt */
+static void ct_xfitimer_callback(struct ct_timer *atimer)
+{
+	int update;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	atimer->irq_handling = 1;
+	do {
+		update = ct_xfitimer_reprogram(atimer);
+		spin_unlock(&atimer->lock);
+		if (update)
+			ct_xfitimer_check_period(atimer);
+		spin_lock(&atimer->lock);
+	} while (atimer->reprogram);
+	atimer->irq_handling = 0;
+	spin_unlock_irqrestore(&atimer->lock, flags);
+}
+
+static void ct_xfitimer_prepare(struct ct_timer_instance *ti)
+{
+	ti->frag_count = ti->substream->runtime->period_size;
+	ti->need_update = 0;
+}
+
+
+/* start/stop the timer */
+static void ct_xfitimer_update(struct ct_timer *atimer)
+{
+	unsigned long flags;
+	int update;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	if (atimer->irq_handling) {
+		/* reached from IRQ handler; let it handle later */
+		atimer->reprogram = 1;
+		spin_unlock_irqrestore(&atimer->lock, flags);
+		return;
+	}
+
+	ct_xfitimer_irq_stop(atimer);
+	update = ct_xfitimer_reprogram(atimer);
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	if (update)
+		ct_xfitimer_check_period(atimer);
+}
+
+static void ct_xfitimer_start(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	if (list_empty(&ti->running_list))
+		atimer->wc = ct_xfitimer_get_wc(atimer);
+	list_add(&ti->running_list, &atimer->running_head);
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	ct_xfitimer_update(atimer);
+}
+
+static void ct_xfitimer_stop(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atimer->lock, flags);
+	list_del_init(&ti->running_list);
+	ti->need_update = 0;
+	spin_unlock_irqrestore(&atimer->lock, flags);
+	ct_xfitimer_update(atimer);
+}
+
+static void ct_xfitimer_free_global(struct ct_timer *atimer)
+{
+	ct_xfitimer_irq_stop(atimer);
+}
+
+static struct ct_timer_ops ct_xfitimer_ops = {
+	.prepare = ct_xfitimer_prepare,
+	.start = ct_xfitimer_start,
+	.stop = ct_xfitimer_stop,
+	.interrupt = ct_xfitimer_callback,
+	.free_global = ct_xfitimer_free_global,
+};
+
+/*
+ * timer instance
+ */
+
+struct ct_timer_instance *
+ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm)
+{
+	struct ct_timer_instance *ti;
+
+	ti = kzalloc(sizeof(*ti), GFP_KERNEL);
+	if (!ti)
+		return NULL;
+	spin_lock_init(&ti->lock);
+	INIT_LIST_HEAD(&ti->instance_list);
+	INIT_LIST_HEAD(&ti->running_list);
+	ti->timer_base = atimer;
+	ti->apcm = apcm;
+	ti->substream = apcm->substream;
+	if (atimer->ops->init)
+		atimer->ops->init(ti);
+
+	spin_lock_irq(&atimer->list_lock);
+	list_add(&ti->instance_list, &atimer->instance_head);
+	spin_unlock_irq(&atimer->list_lock);
+
+	return ti;
+}
+
+void ct_timer_prepare(struct ct_timer_instance *ti)
+{
+	if (ti->timer_base->ops->prepare)
+		ti->timer_base->ops->prepare(ti);
+	ti->position = 0;
+	ti->running = 0;
+}
+
+void ct_timer_start(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	atimer->ops->start(ti);
+}
+
+void ct_timer_stop(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+	atimer->ops->stop(ti);
+}
+
+void ct_timer_instance_free(struct ct_timer_instance *ti)
+{
+	struct ct_timer *atimer = ti->timer_base;
+
+	atimer->ops->stop(ti); /* to be sure */
+	if (atimer->ops->free_instance)
+		atimer->ops->free_instance(ti);
+
+	spin_lock_irq(&atimer->list_lock);
+	list_del(&ti->instance_list);
+	spin_unlock_irq(&atimer->list_lock);
+
+	kfree(ti);
+}
+
+/*
+ * timer manager
+ */
+
+static void ct_timer_interrupt(void *data, unsigned int status)
+{
+	struct ct_timer *timer = data;
+
+	/* Interval timer interrupt */
+	if ((status & IT_INT) && timer->ops->interrupt)
+		timer->ops->interrupt(timer);
+}
+
+struct ct_timer *ct_timer_new(struct ct_atc *atc)
+{
+	struct ct_timer *atimer;
+	struct hw *hw;
+
+	atimer = kzalloc(sizeof(*atimer), GFP_KERNEL);
+	if (!atimer)
+		return NULL;
+	spin_lock_init(&atimer->lock);
+	spin_lock_init(&atimer->list_lock);
+	INIT_LIST_HEAD(&atimer->instance_head);
+	INIT_LIST_HEAD(&atimer->running_head);
+	atimer->atc = atc;
+	hw = atc->hw;
+	if (!use_system_timer && hw->set_timer_irq) {
+		snd_printd(KERN_INFO "ctxfi: Use xfi-native timer\n");
+		atimer->ops = &ct_xfitimer_ops;
+		hw->irq_callback_data = atimer;
+		hw->irq_callback = ct_timer_interrupt;
+	} else {
+		snd_printd(KERN_INFO "ctxfi: Use system timer\n");
+		atimer->ops = &ct_systimer_ops;
+	}
+	return atimer;
+}
+
+void ct_timer_free(struct ct_timer *atimer)
+{
+	struct hw *hw = atimer->atc->hw;
+	hw->irq_callback = NULL;
+	if (atimer->ops->free_global)
+		atimer->ops->free_global(atimer);
+	kfree(atimer);
+}
+
diff --git a/sound/pci/ctxfi/cttimer.h b/sound/pci/ctxfi/cttimer.h
new file mode 100644
index 00000000000..97934822929
--- /dev/null
+++ b/sound/pci/ctxfi/cttimer.h
@@ -0,0 +1,29 @@
+/*
+ * Timer handling
+ */
+
+#ifndef __CTTIMER_H
+#define __CTTIMER_H
+
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+
+struct snd_pcm_substream;
+struct ct_atc;
+struct ct_atc_pcm;
+
+struct ct_timer;
+struct ct_timer_instance;
+
+struct ct_timer *ct_timer_new(struct ct_atc *atc);
+void ct_timer_free(struct ct_timer *atimer);
+
+struct ct_timer_instance *
+ct_timer_instance_new(struct ct_timer *atimer, struct ct_atc_pcm *apcm);
+void ct_timer_instance_free(struct ct_timer_instance *ti);
+void ct_timer_start(struct ct_timer_instance *ti);
+void ct_timer_stop(struct ct_timer_instance *ti);
+void ct_timer_prepare(struct ct_timer_instance *ti);
+
+#endif /* __CTTIMER_H */
diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c
new file mode 100644
index 00000000000..67665a7e43c
--- /dev/null
+++ b/sound/pci/ctxfi/ctvmem.c
@@ -0,0 +1,250 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctvmem.c
+ *
+ * @Brief
+ * This file contains the implementation of virtual memory management object
+ * for card device.
+ *
+ * @Author Liu Chun
+ * @Date Apr 1 2008
+ */
+
+#include "ctvmem.h"
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <sound/pcm.h>
+
+#define CT_PTES_PER_PAGE (CT_PAGE_SIZE / sizeof(void *))
+#define CT_ADDRS_PER_PAGE (CT_PTES_PER_PAGE * CT_PAGE_SIZE)
+
+/* *
+ * Find or create vm block based on requested @size.
+ * @size must be page aligned.
+ * */
+static struct ct_vm_block *
+get_vm_block(struct ct_vm *vm, unsigned int size)
+{
+	struct ct_vm_block *block = NULL, *entry;
+	struct list_head *pos;
+
+	size = CT_PAGE_ALIGN(size);
+	if (size > vm->size) {
+		printk(KERN_ERR "ctxfi: Fail! No sufficient device virtural "
+				  "memory space available!\n");
+		return NULL;
+	}
+
+	mutex_lock(&vm->lock);
+	list_for_each(pos, &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		if (entry->size >= size)
+			break; /* found a block that is big enough */
+	}
+	if (pos == &vm->unused)
+		goto out;
+
+	if (entry->size == size) {
+		/* Move the vm node from unused list to used list directly */
+		list_del(&entry->list);
+		list_add(&entry->list, &vm->used);
+		vm->size -= size;
+		block = entry;
+		goto out;
+	}
+
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (NULL == block)
+		goto out;
+
+	block->addr = entry->addr;
+	block->size = size;
+	list_add(&block->list, &vm->used);
+	entry->addr += size;
+	entry->size -= size;
+	vm->size -= size;
+
+ out:
+	mutex_unlock(&vm->lock);
+	return block;
+}
+
+static void put_vm_block(struct ct_vm *vm, struct ct_vm_block *block)
+{
+	struct ct_vm_block *entry, *pre_ent;
+	struct list_head *pos, *pre;
+
+	block->size = CT_PAGE_ALIGN(block->size);
+
+	mutex_lock(&vm->lock);
+	list_del(&block->list);
+	vm->size += block->size;
+
+	list_for_each(pos, &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		if (entry->addr >= (block->addr + block->size))
+			break; /* found a position */
+	}
+	if (pos == &vm->unused) {
+		list_add_tail(&block->list, &vm->unused);
+		entry = block;
+	} else {
+		if ((block->addr + block->size) == entry->addr) {
+			entry->addr = block->addr;
+			entry->size += block->size;
+			kfree(block);
+		} else {
+			__list_add(&block->list, pos->prev, pos);
+			entry = block;
+		}
+	}
+
+	pos = &entry->list;
+	pre = pos->prev;
+	while (pre != &vm->unused) {
+		entry = list_entry(pos, struct ct_vm_block, list);
+		pre_ent = list_entry(pre, struct ct_vm_block, list);
+		if ((pre_ent->addr + pre_ent->size) > entry->addr)
+			break;
+
+		pre_ent->size += entry->size;
+		list_del(pos);
+		kfree(entry);
+		pos = pre;
+		pre = pos->prev;
+	}
+	mutex_unlock(&vm->lock);
+}
+
+/* Map host addr (kmalloced/vmalloced) to device logical addr. */
+static struct ct_vm_block *
+ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size)
+{
+	struct ct_vm_block *block;
+	unsigned int pte_start;
+	unsigned i, pages;
+	unsigned long *ptp;
+
+	block = get_vm_block(vm, size);
+	if (block == NULL) {
+		printk(KERN_ERR "ctxfi: No virtual memory block that is big "
+				  "enough to allocate!\n");
+		return NULL;
+	}
+
+	ptp = vm->ptp[0];
+	pte_start = (block->addr >> CT_PAGE_SHIFT);
+	pages = block->size >> CT_PAGE_SHIFT;
+	for (i = 0; i < pages; i++) {
+		unsigned long addr;
+		addr = snd_pcm_sgbuf_get_addr(substream, i << CT_PAGE_SHIFT);
+		ptp[pte_start + i] = addr;
+	}
+
+	block->size = size;
+	return block;
+}
+
+static void ct_vm_unmap(struct ct_vm *vm, struct ct_vm_block *block)
+{
+	/* do unmapping */
+	put_vm_block(vm, block);
+}
+
+/* *
+ * return the host (kmalloced) addr of the @index-th device
+ * page talbe page on success, or NULL on failure.
+ * The first returned NULL indicates the termination.
+ * */
+static void *
+ct_get_ptp_virt(struct ct_vm *vm, int index)
+{
+	void *addr;
+
+	addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index];
+
+	return addr;
+}
+
+int ct_vm_create(struct ct_vm **rvm)
+{
+	struct ct_vm *vm;
+	struct ct_vm_block *block;
+	int i;
+
+	*rvm = NULL;
+
+	vm = kzalloc(sizeof(*vm), GFP_KERNEL);
+	if (NULL == vm)
+		return -ENOMEM;
+
+	mutex_init(&vm->lock);
+
+	/* Allocate page table pages */
+	for (i = 0; i < CT_PTP_NUM; i++) {
+		vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		if (NULL == vm->ptp[i])
+			break;
+	}
+	if (!i) {
+		/* no page table pages are allocated */
+		kfree(vm);
+		return -ENOMEM;
+	}
+	vm->size = CT_ADDRS_PER_PAGE * i;
+	/* Initialise remaining ptps */
+	for (; i < CT_PTP_NUM; i++)
+		vm->ptp[i] = NULL;
+
+	vm->map = ct_vm_map;
+	vm->unmap = ct_vm_unmap;
+	vm->get_ptp_virt = ct_get_ptp_virt;
+	INIT_LIST_HEAD(&vm->unused);
+	INIT_LIST_HEAD(&vm->used);
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (NULL != block) {
+		block->addr = 0;
+		block->size = vm->size;
+		list_add(&block->list, &vm->unused);
+	}
+
+	*rvm = vm;
+	return 0;
+}
+
+/* The caller must ensure no mapping pages are being used
+ * by hardware before calling this function */
+void ct_vm_destroy(struct ct_vm *vm)
+{
+	int i;
+	struct list_head *pos;
+	struct ct_vm_block *entry;
+
+	/* free used and unused list nodes */
+	while (!list_empty(&vm->used)) {
+		pos = vm->used.next;
+		list_del(pos);
+		entry = list_entry(pos, struct ct_vm_block, list);
+		kfree(entry);
+	}
+	while (!list_empty(&vm->unused)) {
+		pos = vm->unused.next;
+		list_del(pos);
+		entry = list_entry(pos, struct ct_vm_block, list);
+		kfree(entry);
+	}
+
+	/* free allocated page table pages */
+	for (i = 0; i < CT_PTP_NUM; i++)
+		kfree(vm->ptp[i]);
+
+	vm->size = 0;
+
+	kfree(vm);
+}
diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h
new file mode 100644
index 00000000000..01e4fd0386a
--- /dev/null
+++ b/sound/pci/ctxfi/ctvmem.h
@@ -0,0 +1,61 @@
+/**
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ *
+ * @File    ctvmem.h
+ *
+ * @Brief
+ * This file contains the definition of virtual memory management object
+ * for card device.
+ *
+ * @Author Liu Chun
+ * @Date Mar 28 2008
+ */
+
+#ifndef CTVMEM_H
+#define CTVMEM_H
+
+#define CT_PTP_NUM	1	/* num of device page table pages */
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+
+/* The chip can handle the page table of 4k pages
+ * (emu20k1 can handle even 8k pages, but we don't use it right now)
+ */
+#define CT_PAGE_SIZE	4096
+#define CT_PAGE_SHIFT	12
+#define CT_PAGE_MASK	(~(PAGE_SIZE - 1))
+#define CT_PAGE_ALIGN(addr)	ALIGN(addr, CT_PAGE_SIZE)
+
+struct ct_vm_block {
+	unsigned int addr;	/* starting logical addr of this block */
+	unsigned int size;	/* size of this device virtual mem block */
+	struct list_head list;
+};
+
+struct snd_pcm_substream;
+
+/* Virtual memory management object for card device */
+struct ct_vm {
+	void *ptp[CT_PTP_NUM];		/* Device page table pages */
+	unsigned int size;		/* Available addr space in bytes */
+	struct list_head unused;	/* List of unused blocks */
+	struct list_head used;		/* List of used blocks */
+	struct mutex lock;
+
+	/* Map host addr (kmalloced/vmalloced) to device logical addr. */
+	struct ct_vm_block *(*map)(struct ct_vm *, struct snd_pcm_substream *,
+				   int size);
+	/* Unmap device logical addr area. */
+	void (*unmap)(struct ct_vm *, struct ct_vm_block *block);
+	void *(*get_ptp_virt)(struct ct_vm *vm, int index);
+};
+
+int ct_vm_create(struct ct_vm **rvm);
+void ct_vm_destroy(struct ct_vm *vm);
+
+#endif /* CTVMEM_H */
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
new file mode 100644
index 00000000000..2d3dd89af15
--- /dev/null
+++ b/sound/pci/ctxfi/xfi.c
@@ -0,0 +1,142 @@
+/*
+ * xfi linux driver.
+ *
+ * Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved.
+ *
+ * This source file is released under GPL v2 license (no other versions).
+ * See the COPYING file included in the main directory of this source
+ * distribution for the license terms and conditions.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+#include <linux/pci_ids.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include "ctatc.h"
+#include "cthardware.h"
+
+MODULE_AUTHOR("Creative Technology Ltd");
+MODULE_DESCRIPTION("X-Fi driver version 1.03");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{Creative Labs, Sound Blaster X-Fi}");
+
+static unsigned int reference_rate = 48000;
+static unsigned int multiple = 2;
+MODULE_PARM_DESC(reference_rate, "Reference rate (default=48000)");
+module_param(reference_rate, uint, S_IRUGO);
+MODULE_PARM_DESC(multiple, "Rate multiplier (default=2)");
+module_param(multiple, uint, S_IRUGO);
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Creative X-Fi driver");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for Creative X-Fi driver");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable Creative X-Fi driver");
+
+static struct pci_device_id ct_pci_dev_ids[] = {
+	/* only X-Fi is supported, so... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K1),
+	  .driver_data = ATC20K1,
+	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2),
+	  .driver_data = ATC20K2,
+	},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, ct_pci_dev_ids);
+
+static int __devinit
+ct_card_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct ct_atc *atc;
+	int err;
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	if (err)
+		return err;
+	if ((reference_rate != 48000) && (reference_rate != 44100)) {
+		printk(KERN_ERR "ctxfi: Invalid reference_rate value %u!!!\n",
+		       reference_rate);
+		printk(KERN_ERR "ctxfi: The valid values for reference_rate "
+		       "are 48000 and 44100, Value 48000 is assumed.\n");
+		reference_rate = 48000;
+	}
+	if ((multiple != 1) && (multiple != 2)) {
+		printk(KERN_ERR "ctxfi: Invalid multiple value %u!!!\n",
+		       multiple);
+		printk(KERN_ERR "ctxfi: The valid values for multiple are "
+		       "1 and 2, Value 2 is assumed.\n");
+		multiple = 2;
+	}
+	err = ct_atc_create(card, pci, reference_rate, multiple,
+			    pci_id->driver_data, &atc);
+	if (err < 0)
+		goto error;
+
+	card->private_data = atc;
+
+	/* Create alsa devices supported by this card */
+	err = ct_atc_create_alsa_devs(atc);
+	if (err < 0)
+		goto error;
+
+	strcpy(card->driver, "SB-XFi");
+	strcpy(card->shortname, "Creative X-Fi");
+	snprintf(card->longname, sizeof(card->longname), "%s %s %s",
+		 card->shortname, atc->chip_name, atc->model_name);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+
+	pci_set_drvdata(pci, card);
+	dev++;
+
+	return 0;
+
+error:
+	snd_card_free(card);
+	return err;
+}
+
+static void __devexit ct_card_remove(struct pci_dev *pci)
+{
+	snd_card_free(pci_get_drvdata(pci));
+	pci_set_drvdata(pci, NULL);
+}
+
+static struct pci_driver ct_driver = {
+	.name = "SB-XFi",
+	.id_table = ct_pci_dev_ids,
+	.probe = ct_card_probe,
+	.remove = __devexit_p(ct_card_remove),
+};
+
+static int __init ct_card_init(void)
+{
+	return pci_register_driver(&ct_driver);
+}
+
+static void __exit ct_card_exit(void)
+{
+	pci_unregister_driver(&ct_driver);
+}
+
+module_init(ct_card_init)
+module_exit(ct_card_exit)
diff --git a/sound/pci/emu10k1/Makefile b/sound/pci/emu10k1/Makefile
index cf2d5636d8b..fc5591e7777 100644
--- a/sound/pci/emu10k1/Makefile
+++ b/sound/pci/emu10k1/Makefile
@@ -9,15 +9,7 @@ snd-emu10k1-objs := emu10k1.o emu10k1_main.o \
 snd-emu10k1-synth-objs := emu10k1_synth.o emu10k1_callback.o emu10k1_patch.o
 snd-emu10k1x-objs := emu10k1x.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_EMU10K1) += snd-emu10k1.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emu10k1-synth.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emu10k1-synth.o
 obj-$(CONFIG_SND_EMU10K1X) += snd-emu10k1x.o
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 1970f0e70f3..4d3ad793e98 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -858,7 +858,6 @@ static int __devinit snd_emu10k1x_pcm(struct emu10k1x *emu, int device, struct s
 	}
 
 	pcm->info_flags = 0;
-	pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
 	switch(device) {
 	case 0:
 		strcpy(pcm->name, "EMU10K1X Front");
diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c
index 78f62fd404c..55b83ef73c6 100644
--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -1736,7 +1736,7 @@ static struct snd_pcm_hardware snd_emu10k1_fx8010_playback =
 	.buffer_bytes_max =	(128*1024),
 	.period_bytes_min =	1024,
 	.period_bytes_max =	(128*1024),
-	.periods_min =		1,
+	.periods_min =		2,
 	.periods_max =		1024,
 	.fifo_size =		0,
 };
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index eb2a19b894a..c710150d506 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -139,6 +139,19 @@ config SND_HDA_CODEC_CONEXANT
 	  snd-hda-codec-conexant.
 	  This module is automatically loaded at probing.
 
+config SND_HDA_CODEC_CA0110
+	bool "Build Creative CA0110-IBG codec support"
+	depends on SND_HDA_INTEL
+	default y
+	help
+	  Say Y here to include Creative CA0110-IBG codec support in
+	  snd-hda-intel driver, found on some Creative X-Fi cards.
+
+	  When the HD-audio driver is built as a module, the codec
+	  support code is also built as another module,
+	  snd-hda-codec-ca0110.
+	  This module is automatically loaded at probing.
+
 config SND_HDA_CODEC_CMEDIA
 	bool "Build C-Media HD-audio codec support"
 	default y
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 50f9d096725..e3081d4586c 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -13,6 +13,7 @@ snd-hda-codec-analog-objs :=	patch_analog.o
 snd-hda-codec-idt-objs :=	patch_sigmatel.o
 snd-hda-codec-si3054-objs :=	patch_si3054.o
 snd-hda-codec-atihdmi-objs :=	patch_atihdmi.o
+snd-hda-codec-ca0110-objs :=	patch_ca0110.o
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-nvhdmi-objs :=	patch_nvhdmi.o
@@ -40,6 +41,9 @@ endif
 ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
 endif
+ifdef CONFIG_SND_HDA_CODEC_CA0110
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
+endif
 ifdef CONFIG_SND_HDA_CODEC_CONEXANT
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
 endif
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 4de5bacd392..29272f2e95a 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -45,6 +45,46 @@ static void snd_hda_generate_beep(struct work_struct *work)
 			AC_VERB_SET_BEEP_CONTROL, beep->tone);
 }
 
+/* (non-standard) Linear beep tone calculation for IDT/STAC codecs 
+ *
+ * The tone frequency of beep generator on IDT/STAC codecs is
+ * defined from the 8bit tone parameter, in Hz,
+ *    freq = 48000 * (257 - tone) / 1024
+ * that is from 12kHz to 93.75kHz in step of 46.875 hz
+ */
+static int beep_linear_tone(struct hda_beep *beep, int hz)
+{
+	hz *= 1000; /* fixed point */
+	hz = hz - DIGBEEP_HZ_MIN;
+	if (hz < 0)
+		hz = 0; /* turn off PC beep*/
+	else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
+		hz = 0xff;
+	else {
+		hz /= DIGBEEP_HZ_STEP;
+		hz++;
+	}
+	return hz;
+}
+
+/* HD-audio standard beep tone parameter calculation
+ *
+ * The tone frequency in Hz is calculated as
+ *   freq = 48000 / (tone * 4)
+ * from 47Hz to 12kHz
+ */
+static int beep_standard_tone(struct hda_beep *beep, int hz)
+{
+	if (hz <= 0)
+		return 0; /* disabled */
+	hz = 12000 / hz;
+	if (hz > 0xff)
+		return 0xff;
+	if (hz <= 0)
+		return 1;
+	return hz;
+}
+
 static int snd_hda_beep_event(struct input_dev *dev, unsigned int type,
 				unsigned int code, int hz)
 {
@@ -55,21 +95,14 @@ static int snd_hda_beep_event(struct input_dev *dev, unsigned int type,
 		if (hz)
 			hz = 1000;
 	case SND_TONE:
-		hz *= 1000; /* fixed point */
-		hz = hz - DIGBEEP_HZ_MIN;
-		if (hz < 0)
-			hz = 0; /* turn off PC beep*/
-		else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
-			hz = 0xff;
-		else {
-			hz /= DIGBEEP_HZ_STEP;
-			hz++;
-		}
+		if (beep->linear_tone)
+			beep->tone = beep_linear_tone(beep, hz);
+		else
+			beep->tone = beep_standard_tone(beep, hz);
 		break;
 	default:
 		return -1;
 	}
-	beep->tone = hz;
 
 	/* schedule beep event */
 	schedule_work(&beep->beep_work);
diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h
index 51bf6a5daf3..0c3de787c71 100644
--- a/sound/pci/hda/hda_beep.h
+++ b/sound/pci/hda/hda_beep.h
@@ -30,8 +30,9 @@ struct hda_beep {
 	struct hda_codec *codec;
 	char phys[32];
 	int tone;
-	int nid;
-	int enabled;
+	hda_nid_t nid;
+	unsigned int enabled:1;
+	unsigned int linear_tone:1;	/* linear tone for IDT/STAC codec */
 	struct work_struct beep_work; /* scheduled task for beep event */
 };
 
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 8820faf6c9d..562403a2348 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -48,6 +48,7 @@ static struct hda_vendor_id hda_vendor_ids[] = {
 	{ 0x1095, "Silicon Image" },
 	{ 0x10de, "Nvidia" },
 	{ 0x10ec, "Realtek" },
+	{ 0x1102, "Creative" },
 	{ 0x1106, "VIA" },
 	{ 0x111d, "IDT" },
 	{ 0x11c1, "LSI" },
@@ -157,6 +158,39 @@ make_codec_cmd(struct hda_codec *codec, hda_nid_t nid, int direct,
 	return val;
 }
 
+/*
+ * Send and receive a verb
+ */
+static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd,
+			   unsigned int *res)
+{
+	struct hda_bus *bus = codec->bus;
+	int err;
+
+	if (res)
+		*res = -1;
+ again:
+	snd_hda_power_up(codec);
+	mutex_lock(&bus->cmd_mutex);
+	err = bus->ops.command(bus, cmd);
+	if (!err && res)
+		*res = bus->ops.get_response(bus);
+	mutex_unlock(&bus->cmd_mutex);
+	snd_hda_power_down(codec);
+	if (res && *res == -1 && bus->rirb_error) {
+		if (bus->response_reset) {
+			snd_printd("hda_codec: resetting BUS due to "
+				   "fatal communication error\n");
+			bus->ops.bus_reset(bus);
+		}
+		goto again;
+	}
+	/* clear reset-flag when the communication gets recovered */
+	if (!err)
+		bus->response_reset = 0;
+	return err;
+}
+
 /**
  * snd_hda_codec_read - send a command and get the response
  * @codec: the HDA codec
@@ -173,18 +207,9 @@ unsigned int snd_hda_codec_read(struct hda_codec *codec, hda_nid_t nid,
 				int direct,
 				unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
+	unsigned cmd = make_codec_cmd(codec, nid, direct, verb, parm);
 	unsigned int res;
-
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	if (!bus->ops.command(bus, res))
-		res = bus->ops.get_response(bus);
-	else
-		res = (unsigned int)-1;
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
+	codec_exec_verb(codec, cmd, &res);
 	return res;
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_read);
@@ -204,17 +229,10 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_read);
 int snd_hda_codec_write(struct hda_codec *codec, hda_nid_t nid, int direct,
 			 unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
+	unsigned int cmd = make_codec_cmd(codec, nid, direct, verb, parm);
 	unsigned int res;
-	int err;
-
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	err = bus->ops.command(bus, res);
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
-	return err;
+	return codec_exec_verb(codec, cmd,
+			       codec->bus->sync_write ? &res : NULL);
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write);
 
@@ -613,7 +631,10 @@ static int get_codec_name(struct hda_codec *codec)
 	const struct hda_vendor_id *c;
 	const char *vendor = NULL;
 	u16 vendor_id = codec->vendor_id >> 16;
-	char tmp[16], name[32];
+	char tmp[16];
+
+	if (codec->vendor_name)
+		goto get_chip_name;
 
 	for (c = hda_vendor_ids; c->id; c++) {
 		if (c->id == vendor_id) {
@@ -625,14 +646,21 @@ static int get_codec_name(struct hda_codec *codec)
 		sprintf(tmp, "Generic %04x", vendor_id);
 		vendor = tmp;
 	}
+	codec->vendor_name = kstrdup(vendor, GFP_KERNEL);
+	if (!codec->vendor_name)
+		return -ENOMEM;
+
+ get_chip_name:
+	if (codec->chip_name)
+		return 0;
+
 	if (codec->preset && codec->preset->name)
-		snprintf(name, sizeof(name), "%s %s", vendor,
-			 codec->preset->name);
-	else
-		snprintf(name, sizeof(name), "%s ID %x", vendor,
-			 codec->vendor_id & 0xffff);
-	codec->name = kstrdup(name, GFP_KERNEL);
-	if (!codec->name)
+		codec->chip_name = kstrdup(codec->preset->name, GFP_KERNEL);
+	else {
+		sprintf(tmp, "ID %x", codec->vendor_id & 0xffff);
+		codec->chip_name = kstrdup(tmp, GFP_KERNEL);
+	}
+	if (!codec->chip_name)
 		return -ENOMEM;
 	return 0;
 }
@@ -838,7 +866,8 @@ static void snd_hda_codec_free(struct hda_codec *codec)
 	module_put(codec->owner);
 	free_hda_cache(&codec->amp_cache);
 	free_hda_cache(&codec->cmd_cache);
-	kfree(codec->name);
+	kfree(codec->vendor_name);
+	kfree(codec->chip_name);
 	kfree(codec->modelname);
 	kfree(codec->wcaps);
 	kfree(codec);
@@ -979,15 +1008,16 @@ int snd_hda_codec_configure(struct hda_codec *codec)
 	int err;
 
 	codec->preset = find_codec_preset(codec);
-	if (!codec->name) {
+	if (!codec->vendor_name || !codec->chip_name) {
 		err = get_codec_name(codec);
 		if (err < 0)
 			return err;
 	}
 	/* audio codec should override the mixer name */
 	if (codec->afg || !*codec->bus->card->mixername)
-		strlcpy(codec->bus->card->mixername, codec->name,
-			sizeof(codec->bus->card->mixername));
+		snprintf(codec->bus->card->mixername,
+			 sizeof(codec->bus->card->mixername),
+			 "%s %s", codec->vendor_name, codec->chip_name);
 
 	if (is_generic_config(codec)) {
 		err = snd_hda_parse_generic_codec(codec);
@@ -1055,6 +1085,8 @@ EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream);
 /* FIXME: more better hash key? */
 #define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
 #define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
+#define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
+#define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
 #define INFO_AMP_CAPS	(1<<0)
 #define INFO_AMP_VOL(ch)	(1 << (1 + (ch)))
 
@@ -1145,19 +1177,32 @@ int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
 }
 EXPORT_SYMBOL_HDA(snd_hda_override_amp_caps);
 
-u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
+static unsigned int
+query_caps_hash(struct hda_codec *codec, hda_nid_t nid, u32 key,
+		unsigned int (*func)(struct hda_codec *, hda_nid_t))
 {
 	struct hda_amp_info *info;
 
-	info = get_alloc_amp_hash(codec, HDA_HASH_PINCAP_KEY(nid));
+	info = get_alloc_amp_hash(codec, key);
 	if (!info)
 		return 0;
 	if (!info->head.val) {
-		info->amp_caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
 		info->head.val |= INFO_AMP_CAPS;
+		info->amp_caps = func(codec, nid);
 	}
 	return info->amp_caps;
 }
+
+static unsigned int read_pin_cap(struct hda_codec *codec, hda_nid_t nid)
+{
+	return snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+}
+
+u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PINCAP_KEY(nid),
+			       read_pin_cap);
+}
 EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps);
 
 /*
@@ -1432,6 +1477,8 @@ _snd_hda_find_mixer_ctl(struct hda_codec *codec,
 	memset(&id, 0, sizeof(id));
 	id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 	id.index = idx;
+	if (snd_BUG_ON(strlen(name) >= sizeof(id.name)))
+		return NULL;
 	strcpy(id.name, name);
 	return snd_ctl_find_id(codec->bus->card, &id);
 }
@@ -2242,28 +2289,22 @@ EXPORT_SYMBOL_HDA(snd_hda_create_spdif_in_ctls);
 int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid,
 			      int direct, unsigned int verb, unsigned int parm)
 {
-	struct hda_bus *bus = codec->bus;
-	unsigned int res;
-	int err;
+	int err = snd_hda_codec_write(codec, nid, direct, verb, parm);
+	struct hda_cache_head *c;
+	u32 key;
 
-	res = make_codec_cmd(codec, nid, direct, verb, parm);
-	snd_hda_power_up(codec);
-	mutex_lock(&bus->cmd_mutex);
-	err = bus->ops.command(bus, res);
-	if (!err) {
-		struct hda_cache_head *c;
-		u32 key;
-		/* parm may contain the verb stuff for get/set amp */
-		verb = verb | (parm >> 8);
-		parm &= 0xff;
-		key = build_cmd_cache_key(nid, verb);
-		c = get_alloc_hash(&codec->cmd_cache, key);
-		if (c)
-			c->val = parm;
-	}
-	mutex_unlock(&bus->cmd_mutex);
-	snd_hda_power_down(codec);
-	return err;
+	if (err < 0)
+		return err;
+	/* parm may contain the verb stuff for get/set amp */
+	verb = verb | (parm >> 8);
+	parm &= 0xff;
+	key = build_cmd_cache_key(nid, verb);
+	mutex_lock(&codec->bus->cmd_mutex);
+	c = get_alloc_hash(&codec->cmd_cache, key);
+	if (c)
+		c->val = parm;
+	mutex_unlock(&codec->bus->cmd_mutex);
+	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write_cache);
 
@@ -2321,7 +2362,8 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
 		if (wcaps & AC_WCAP_POWER) {
 			unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
 				AC_WCAP_TYPE_SHIFT;
-			if (wid_type == AC_WID_PIN) {
+			if (power_state == AC_PWRST_D3 &&
+			    wid_type == AC_WID_PIN) {
 				unsigned int pincap;
 				/*
 				 * don't power down the widget if it controls
@@ -2333,7 +2375,7 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
 						nid, 0,
 						AC_VERB_GET_EAPD_BTLENABLE, 0);
 					eapd &= 0x02;
-					if (power_state == AC_PWRST_D3 && eapd)
+					if (eapd)
 						continue;
 				}
 			}
@@ -2544,6 +2586,41 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate,
 }
 EXPORT_SYMBOL_HDA(snd_hda_calc_stream_format);
 
+static unsigned int get_pcm_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int val = 0;
+	if (nid != codec->afg &&
+	    (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD))
+		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
+	if (!val || val == -1)
+		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
+	if (!val || val == -1)
+		return 0;
+	return val;
+}
+
+static unsigned int query_pcm_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PARPCM_KEY(nid),
+			       get_pcm_param);
+}
+
+static unsigned int get_stream_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
+	if (!streams || streams == -1)
+		streams = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
+	if (!streams || streams == -1)
+		return 0;
+	return streams;
+}
+
+static unsigned int query_stream_param(struct hda_codec *codec, hda_nid_t nid)
+{
+	return query_caps_hash(codec, nid, HDA_HASH_PARSTR_KEY(nid),
+			       get_stream_param);
+}
+
 /**
  * snd_hda_query_supported_pcm - query the supported PCM rates and formats
  * @codec: the HDA codec
@@ -2562,15 +2639,8 @@ static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
 {
 	unsigned int i, val, wcaps;
 
-	val = 0;
 	wcaps = get_wcaps(codec, nid);
-	if (nid != codec->afg && (wcaps & AC_WCAP_FORMAT_OVRD)) {
-		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
-		if (val == -1)
-			return -EIO;
-	}
-	if (!val)
-		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
+	val = query_pcm_param(codec, nid);
 
 	if (ratesp) {
 		u32 rates = 0;
@@ -2592,15 +2662,9 @@ static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
 		u64 formats = 0;
 		unsigned int streams, bps;
 
-		streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
-		if (streams == -1)
+		streams = query_stream_param(codec, nid);
+		if (!streams)
 			return -EIO;
-		if (!streams) {
-			streams = snd_hda_param_read(codec, codec->afg,
-						     AC_PAR_STREAM);
-			if (streams == -1)
-				return -EIO;
-		}
 
 		bps = 0;
 		if (streams & AC_SUPFMT_PCM) {
@@ -2674,17 +2738,9 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid,
 	int i;
 	unsigned int val = 0, rate, stream;
 
-	if (nid != codec->afg &&
-	    (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) {
-		val = snd_hda_param_read(codec, nid, AC_PAR_PCM);
-		if (val == -1)
-			return 0;
-	}
-	if (!val) {
-		val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
-		if (val == -1)
-			return 0;
-	}
+	val = query_pcm_param(codec, nid);
+	if (!val)
+		return 0;
 
 	rate = format & 0xff00;
 	for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++)
@@ -2696,12 +2752,8 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid,
 	if (i >= AC_PAR_PCM_RATE_BITS)
 		return 0;
 
-	stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
-	if (stream == -1)
-		return 0;
-	if (!stream && nid != codec->afg)
-		stream = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
-	if (!stream || stream == -1)
+	stream = query_stream_param(codec, nid);
+	if (!stream)
 		return 0;
 
 	if (stream & AC_SUPFMT_PCM) {
@@ -3835,11 +3887,10 @@ EXPORT_SYMBOL_HDA(auto_pin_cfg_labels);
 /**
  * snd_hda_suspend - suspend the codecs
  * @bus: the HDA bus
- * @state: suspsend state
  *
  * Returns 0 if successful.
  */
-int snd_hda_suspend(struct hda_bus *bus, pm_message_t state)
+int snd_hda_suspend(struct hda_bus *bus)
 {
 	struct hda_codec *codec;
 
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 2fdecf4b0eb..cad79efaabc 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -574,6 +574,8 @@ struct hda_bus_ops {
 	/* attach a PCM stream */
 	int (*attach_pcm)(struct hda_bus *bus, struct hda_codec *codec,
 			  struct hda_pcm *pcm);
+	/* reset bus for retry verb */
+	void (*bus_reset)(struct hda_bus *bus);
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	/* notify power-up/down from codec to controller */
 	void (*pm_notify)(struct hda_bus *bus);
@@ -622,7 +624,13 @@ struct hda_bus {
 
 	/* misc op flags */
 	unsigned int needs_damn_long_delay :1;
+	unsigned int allow_bus_reset:1;	/* allow bus reset at fatal error */
+	unsigned int sync_write:1;	/* sync after verb write */
+	/* status for codec/controller */
 	unsigned int shutdown :1;	/* being unloaded */
+	unsigned int rirb_error:1;	/* error in codec communication */
+	unsigned int response_reset:1;	/* controller was reset */
+	unsigned int in_reset:1;	/* during reset operation */
 };
 
 /*
@@ -747,7 +755,8 @@ struct hda_codec {
 	/* detected preset */
 	const struct hda_codec_preset *preset;
 	struct module *owner;
-	const char *name;	/* codec name */
+	const char *vendor_name;	/* codec vendor name */
+	const char *chip_name;		/* codec chip name */
 	const char *modelname;	/* model name for preset */
 
 	/* set by patch */
@@ -905,7 +914,7 @@ void snd_hda_get_codec_name(struct hda_codec *codec, char *name, int namelen);
  * power management
  */
 #ifdef CONFIG_PM
-int snd_hda_suspend(struct hda_bus *bus, pm_message_t state);
+int snd_hda_suspend(struct hda_bus *bus);
 int snd_hda_resume(struct hda_bus *bus);
 #endif
 
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 1c57505c287..6812fbe80fa 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -242,7 +242,8 @@ CODEC_INFO_SHOW(subsystem_id);
 CODEC_INFO_SHOW(revision_id);
 CODEC_INFO_SHOW(afg);
 CODEC_INFO_SHOW(mfg);
-CODEC_INFO_STR_SHOW(name);
+CODEC_INFO_STR_SHOW(vendor_name);
+CODEC_INFO_STR_SHOW(chip_name);
 CODEC_INFO_STR_SHOW(modelname);
 
 #define CODEC_INFO_STORE(type)					\
@@ -275,7 +276,8 @@ static ssize_t type##_store(struct device *dev,			\
 CODEC_INFO_STORE(vendor_id);
 CODEC_INFO_STORE(subsystem_id);
 CODEC_INFO_STORE(revision_id);
-CODEC_INFO_STR_STORE(name);
+CODEC_INFO_STR_STORE(vendor_name);
+CODEC_INFO_STR_STORE(chip_name);
 CODEC_INFO_STR_STORE(modelname);
 
 #define CODEC_ACTION_STORE(type)				\
@@ -499,7 +501,8 @@ static struct device_attribute codec_attrs[] = {
 	CODEC_ATTR_RW(revision_id),
 	CODEC_ATTR_RO(afg),
 	CODEC_ATTR_RO(mfg),
-	CODEC_ATTR_RW(name),
+	CODEC_ATTR_RW(vendor_name),
+	CODEC_ATTR_RW(chip_name),
 	CODEC_ATTR_RW(modelname),
 	CODEC_ATTR_RW(init_verbs),
 	CODEC_ATTR_RW(hints),
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 21e99cfa8c4..4e9ea708027 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -128,21 +128,33 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
 			 "{ULI, M5461}}");
 MODULE_DESCRIPTION("Intel HDA driver");
 
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+#define SFX	/* nop */
+#else
 #define SFX	"hda-intel: "
-
+#endif
 
 /*
  * registers
  */
 #define ICH6_REG_GCAP			0x00
+#define   ICH6_GCAP_64OK	(1 << 0)   /* 64bit address support */
+#define   ICH6_GCAP_NSDO	(3 << 1)   /* # of serial data out signals */
+#define   ICH6_GCAP_BSS		(31 << 3)  /* # of bidirectional streams */
+#define   ICH6_GCAP_ISS		(15 << 8)  /* # of input streams */
+#define   ICH6_GCAP_OSS		(15 << 12) /* # of output streams */
 #define ICH6_REG_VMIN			0x02
 #define ICH6_REG_VMAJ			0x03
 #define ICH6_REG_OUTPAY			0x04
 #define ICH6_REG_INPAY			0x06
 #define ICH6_REG_GCTL			0x08
+#define   ICH6_GCTL_RESET	(1 << 0)   /* controller reset */
+#define   ICH6_GCTL_FCNTRL	(1 << 1)   /* flush control */
+#define   ICH6_GCTL_UNSOL	(1 << 8)   /* accept unsol. response enable */
 #define ICH6_REG_WAKEEN			0x0c
 #define ICH6_REG_STATESTS		0x0e
 #define ICH6_REG_GSTS			0x10
+#define   ICH6_GSTS_FSTS	(1 << 1)   /* flush status */
 #define ICH6_REG_INTCTL			0x20
 #define ICH6_REG_INTSTS			0x24
 #define ICH6_REG_WALCLK			0x30
@@ -150,17 +162,27 @@ MODULE_DESCRIPTION("Intel HDA driver");
 #define ICH6_REG_CORBLBASE		0x40
 #define ICH6_REG_CORBUBASE		0x44
 #define ICH6_REG_CORBWP			0x48
-#define ICH6_REG_CORBRP			0x4A
+#define ICH6_REG_CORBRP			0x4a
+#define   ICH6_CORBRP_RST	(1 << 15)  /* read pointer reset */
 #define ICH6_REG_CORBCTL		0x4c
+#define   ICH6_CORBCTL_RUN	(1 << 1)   /* enable DMA */
+#define   ICH6_CORBCTL_CMEIE	(1 << 0)   /* enable memory error irq */
 #define ICH6_REG_CORBSTS		0x4d
+#define   ICH6_CORBSTS_CMEI	(1 << 0)   /* memory error indication */
 #define ICH6_REG_CORBSIZE		0x4e
 
 #define ICH6_REG_RIRBLBASE		0x50
 #define ICH6_REG_RIRBUBASE		0x54
 #define ICH6_REG_RIRBWP			0x58
+#define   ICH6_RIRBWP_RST	(1 << 15)  /* write pointer reset */
 #define ICH6_REG_RINTCNT		0x5a
 #define ICH6_REG_RIRBCTL		0x5c
+#define   ICH6_RBCTL_IRQ_EN	(1 << 0)   /* enable IRQ */
+#define   ICH6_RBCTL_DMA_EN	(1 << 1)   /* enable DMA */
+#define   ICH6_RBCTL_OVERRUN_EN	(1 << 2)   /* enable overrun irq */
 #define ICH6_REG_RIRBSTS		0x5d
+#define   ICH6_RBSTS_IRQ	(1 << 0)   /* response irq */
+#define   ICH6_RBSTS_OVERRUN	(1 << 2)   /* overrun irq */
 #define ICH6_REG_RIRBSIZE		0x5e
 
 #define ICH6_REG_IC			0x60
@@ -257,16 +279,6 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 #define ICH6_INT_CTRL_EN	0x40000000 /* controller interrupt enable bit */
 #define ICH6_INT_GLOBAL_EN	0x80000000 /* global interrupt enable bit */
 
-/* GCTL unsolicited response enable bit */
-#define ICH6_GCTL_UREN		(1<<8)
-
-/* GCTL reset bit */
-#define ICH6_GCTL_RESET		(1<<0)
-
-/* CORB/RIRB control, read/write pointer */
-#define ICH6_RBCTL_DMA_EN	0x02	/* enable DMA */
-#define ICH6_RBCTL_IRQ_EN	0x01	/* enable IRQ */
-#define ICH6_RBRWP_CLR		0x8000	/* read/write pointer clear */
 /* below are so far hardcoded - should read registers in future */
 #define ICH6_MAX_CORB_ENTRIES	256
 #define ICH6_MAX_RIRB_ENTRIES	256
@@ -512,25 +524,25 @@ static void azx_init_cmd_io(struct azx *chip)
 	/* set the corb write pointer to 0 */
 	azx_writew(chip, CORBWP, 0);
 	/* reset the corb hw read pointer */
-	azx_writew(chip, CORBRP, ICH6_RBRWP_CLR);
+	azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
 	/* enable corb dma */
-	azx_writeb(chip, CORBCTL, ICH6_RBCTL_DMA_EN);
+	azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
 
 	/* RIRB set up */
 	chip->rirb.addr = chip->rb.addr + 2048;
 	chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
+	chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0;
 	azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
 	azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
 
 	/* set the rirb size to 256 entries (ULI requires explicitly) */
 	azx_writeb(chip, RIRBSIZE, 0x02);
 	/* reset the rirb hw write pointer */
-	azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR);
+	azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST);
 	/* set N=1, get RIRB response interrupt for new entry */
 	azx_writew(chip, RINTCNT, 1);
 	/* enable rirb dma and response irq */
 	azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
-	chip->rirb.rp = chip->rirb.cmds = 0;
 }
 
 static void azx_free_cmd_io(struct azx *chip)
@@ -606,6 +618,7 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 		}
 		if (!chip->rirb.cmds) {
 			smp_rmb();
+			bus->rirb_error = 0;
 			return chip->rirb.res; /* the last value */
 		}
 		if (time_after(jiffies, timeout))
@@ -619,19 +632,21 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 	}
 
 	if (chip->msi) {
-		snd_printk(KERN_WARNING "hda_intel: No response from codec, "
+		snd_printk(KERN_WARNING SFX "No response from codec, "
 			   "disabling MSI: last cmd=0x%08x\n", chip->last_cmd);
 		free_irq(chip->irq, chip);
 		chip->irq = -1;
 		pci_disable_msi(chip->pci);
 		chip->msi = 0;
-		if (azx_acquire_irq(chip, 1) < 0)
+		if (azx_acquire_irq(chip, 1) < 0) {
+			bus->rirb_error = 1;
 			return -1;
+		}
 		goto again;
 	}
 
 	if (!chip->polling_mode) {
-		snd_printk(KERN_WARNING "hda_intel: azx_get_response timeout, "
+		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
 			   "switching to polling mode: last cmd=0x%08x\n",
 			   chip->last_cmd);
 		chip->polling_mode = 1;
@@ -646,14 +661,23 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
 		return -1;
 	}
 
+	/* a fatal communication error; need either to reset or to fallback
+	 * to the single_cmd mode
+	 */
+	bus->rirb_error = 1;
+	if (bus->allow_bus_reset && !bus->response_reset && !bus->in_reset) {
+		bus->response_reset = 1;
+		return -1; /* give a chance to retry */
+	}
+
 	snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
 		   "switching to single_cmd mode: last cmd=0x%08x\n",
 		   chip->last_cmd);
-	chip->rirb.rp = azx_readb(chip, RIRBWP);
-	chip->rirb.cmds = 0;
-	/* switch to single_cmd mode */
 	chip->single_cmd = 1;
+	bus->response_reset = 0;
+	/* re-initialize CORB/RIRB */
 	azx_free_cmd_io(chip);
+	azx_init_cmd_io(chip);
 	return -1;
 }
 
@@ -667,12 +691,34 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus)
  *       I left the codes, however, for debugging/testing purposes.
  */
 
+/* receive a response */
+static int azx_single_wait_for_response(struct azx *chip)
+{
+	int timeout = 50;
+
+	while (timeout--) {
+		/* check IRV busy bit */
+		if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
+			/* reuse rirb.res as the response return value */
+			chip->rirb.res = azx_readl(chip, IR);
+			return 0;
+		}
+		udelay(1);
+	}
+	if (printk_ratelimit())
+		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
+			   azx_readw(chip, IRS));
+	chip->rirb.res = -1;
+	return -EIO;
+}
+
 /* send a command */
 static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 {
 	struct azx *chip = bus->private_data;
 	int timeout = 50;
 
+	bus->rirb_error = 0;
 	while (timeout--) {
 		/* check ICB busy bit */
 		if (!((azx_readw(chip, IRS) & ICH6_IRS_BUSY))) {
@@ -682,7 +728,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 			azx_writel(chip, IC, val);
 			azx_writew(chip, IRS, azx_readw(chip, IRS) |
 				   ICH6_IRS_BUSY);
-			return 0;
+			return azx_single_wait_for_response(chip);
 		}
 		udelay(1);
 	}
@@ -696,18 +742,7 @@ static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
 static unsigned int azx_single_get_response(struct hda_bus *bus)
 {
 	struct azx *chip = bus->private_data;
-	int timeout = 50;
-
-	while (timeout--) {
-		/* check IRV busy bit */
-		if (azx_readw(chip, IRS) & ICH6_IRS_VALID)
-			return azx_readl(chip, IR);
-		udelay(1);
-	}
-	if (printk_ratelimit())
-		snd_printd(SFX "get_response timeout: IRS=0x%x\n",
-			   azx_readw(chip, IRS));
-	return (unsigned int)-1;
+	return chip->rirb.res;
 }
 
 /*
@@ -775,17 +810,17 @@ static int azx_reset(struct azx *chip)
 
 	/* check to see if controller is ready */
 	if (!azx_readb(chip, GCTL)) {
-		snd_printd("azx_reset: controller not ready!\n");
+		snd_printd(SFX "azx_reset: controller not ready!\n");
 		return -EBUSY;
 	}
 
 	/* Accept unsolicited responses */
-	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UREN);
+	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL);
 
 	/* detect codecs */
 	if (!chip->codec_mask) {
 		chip->codec_mask = azx_readw(chip, STATESTS);
-		snd_printdd("codec_mask = 0x%x\n", chip->codec_mask);
+		snd_printdd(SFX "codec_mask = 0x%x\n", chip->codec_mask);
 	}
 
 	return 0;
@@ -895,8 +930,7 @@ static void azx_init_chip(struct azx *chip)
 	azx_int_enable(chip);
 
 	/* initialize the codec command I/O */
-	if (!chip->single_cmd)
-		azx_init_cmd_io(chip);
+	azx_init_cmd_io(chip);
 
 	/* program the position buffer */
 	azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
@@ -953,12 +987,12 @@ static void azx_init_pci(struct azx *chip)
 	case AZX_DRIVER_SCH:
 		pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
 		if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) {
-			pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, \
+			pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC,
 				snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP));
 			pci_read_config_word(chip->pci,
 				INTEL_SCH_HDA_DEVC, &snoop);
-			snd_printdd("HDA snoop disabled, enabling ... %s\n",\
-				(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) \
+			snd_printdd(SFX "HDA snoop disabled, enabling ... %s\n",
+				(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)
 				? "Failed" : "OK");
 		}
 		break;
@@ -1012,7 +1046,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id)
 	/* clear rirb int */
 	status = azx_readb(chip, RIRBSTS);
 	if (status & RIRB_INT_MASK) {
-		if (!chip->single_cmd && (status & RIRB_INT_RESPONSE))
+		if (status & RIRB_INT_RESPONSE)
 			azx_update_rirb(chip);
 		azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 	}
@@ -1098,7 +1132,7 @@ static int azx_setup_periods(struct azx *chip,
 				pos_align;
 		pos_adj = frames_to_bytes(runtime, pos_adj);
 		if (pos_adj >= period_bytes) {
-			snd_printk(KERN_WARNING "Too big adjustment %d\n",
+			snd_printk(KERN_WARNING SFX "Too big adjustment %d\n",
 				   bdl_pos_adj[chip->dev_index]);
 			pos_adj = 0;
 		} else {
@@ -1122,7 +1156,7 @@ static int azx_setup_periods(struct azx *chip,
 	return 0;
 
  error:
-	snd_printk(KERN_ERR "Too many BDL entries: buffer=%d, period=%d\n",
+	snd_printk(KERN_ERR SFX "Too many BDL entries: buffer=%d, period=%d\n",
 		   azx_dev->bufsize, period_bytes);
 	return -EINVAL;
 }
@@ -1215,7 +1249,7 @@ static int probe_codec(struct azx *chip, int addr)
 	chip->probing = 0;
 	if (res == -1)
 		return -EIO;
-	snd_printdd("hda_intel: codec #%d probed OK\n", addr);
+	snd_printdd(SFX "codec #%d probed OK\n", addr);
 	return 0;
 }
 
@@ -1223,6 +1257,26 @@ static int azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
 				 struct hda_pcm *cpcm);
 static void azx_stop_chip(struct azx *chip);
 
+static void azx_bus_reset(struct hda_bus *bus)
+{
+	struct azx *chip = bus->private_data;
+
+	bus->in_reset = 1;
+	azx_stop_chip(chip);
+	azx_init_chip(chip);
+#ifdef CONFIG_PM
+	if (chip->initialized) {
+		int i;
+
+		for (i = 0; i < AZX_MAX_PCMS; i++)
+			snd_pcm_suspend_all(chip->pcm[i]);
+		snd_hda_suspend(chip->bus);
+		snd_hda_resume(chip->bus);
+	}
+#endif
+	bus->in_reset = 0;
+}
+
 /*
  * Codec initialization
  */
@@ -1246,6 +1300,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model,
 	bus_temp.ops.command = azx_send_cmd;
 	bus_temp.ops.get_response = azx_get_response;
 	bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
+	bus_temp.ops.bus_reset = azx_bus_reset;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	bus_temp.power_save = &power_save;
 	bus_temp.ops.pm_notify = azx_power_notify;
@@ -1270,8 +1325,8 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model,
 				/* Some BIOSen give you wrong codec addresses
 				 * that don't exist
 				 */
-				snd_printk(KERN_WARNING
-					   "hda_intel: Codec #%d probe error; "
+				snd_printk(KERN_WARNING SFX
+					   "Codec #%d probe error; "
 					   "disabling it...\n", c);
 				chip->codec_mask &= ~(1 << c);
 				/* More badly, accessing to a non-existing
@@ -1487,7 +1542,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
 	bufsize = snd_pcm_lib_buffer_bytes(substream);
 	period_bytes = snd_pcm_lib_period_bytes(substream);
 
-	snd_printdd("azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
+	snd_printdd(SFX "azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
 		    bufsize, format_val);
 
 	if (bufsize != azx_dev->bufsize ||
@@ -1830,7 +1885,7 @@ azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
 			  &pcm);
 	if (err < 0)
 		return err;
-	strcpy(pcm->name, cpcm->name);
+	strlcpy(pcm->name, cpcm->name, sizeof(pcm->name));
 	apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
 	if (apcm == NULL)
 		return -ENOMEM;
@@ -1973,7 +2028,7 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state)
 	for (i = 0; i < AZX_MAX_PCMS; i++)
 		snd_pcm_suspend_all(chip->pcm[i]);
 	if (chip->initialized)
-		snd_hda_suspend(chip->bus, state);
+		snd_hda_suspend(chip->bus);
 	azx_stop_chip(chip);
 	if (chip->irq >= 0) {
 		free_irq(chip->irq, chip);
@@ -2141,6 +2196,7 @@ static struct snd_pci_quirk probe_mask_list[] __devinitdata = {
 	/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
 	SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
 	/* forced codec slots */
+	SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
 	SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
 	{}
 };
@@ -2264,14 +2320,14 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	synchronize_irq(chip->irq);
 
 	gcap = azx_readw(chip, GCAP);
-	snd_printdd("chipset global capabilities = 0x%x\n", gcap);
+	snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap);
 
 	/* ATI chips seems buggy about 64bit DMA addresses */
 	if (chip->driver_type == AZX_DRIVER_ATI)
-		gcap &= ~0x01;
+		gcap &= ~ICH6_GCAP_64OK;
 
 	/* allow 64bit DMA address if supported by H/W */
-	if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+	if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
 		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
 	else {
 		pci_set_dma_mask(pci, DMA_BIT_MASK(32));
@@ -2308,7 +2364,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev),
 				GFP_KERNEL);
 	if (!chip->azx_dev) {
-		snd_printk(KERN_ERR "cannot malloc azx_dev\n");
+		snd_printk(KERN_ERR SFX "cannot malloc azx_dev\n");
 		goto errout;
 	}
 
@@ -2331,11 +2387,9 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 		goto errout;
 	}
 	/* allocate CORB/RIRB */
-	if (!chip->single_cmd) {
-		err = azx_alloc_cmd_io(chip);
-		if (err < 0)
-			goto errout;
-	}
+	err = azx_alloc_cmd_io(chip);
+	if (err < 0)
+		goto errout;
 
 	/* initialize streams */
 	azx_init_stream(chip);
@@ -2358,9 +2412,11 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	}
 
 	strcpy(card->driver, "HDA-Intel");
-	strcpy(card->shortname, driver_short_names[chip->driver_type]);
-	sprintf(card->longname, "%s at 0x%lx irq %i",
-		card->shortname, chip->addr, chip->irq);
+	strlcpy(card->shortname, driver_short_names[chip->driver_type],
+		sizeof(card->shortname));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s at 0x%lx irq %i",
+		 card->shortname, chip->addr, chip->irq);
 
 	*rchip = chip;
 	return 0;
@@ -2513,6 +2569,20 @@ static struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA },
 	/* Teradici */
 	{ PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA },
+	/* Creative X-Fi (CA0110-IBG) */
+#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
+	/* the following entry conflicts with snd-ctxfi driver,
+	 * as ctxfi driver mutates from HD-audio to native mode with
+	 * a special command sequence.
+	 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID),
+	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+	  .class_mask = 0xffffff,
+	  .driver_data = AZX_DRIVER_GENERIC },
+#else
+	/* this entry seems still valid -- i.e. without emu20kx chip */
+	{ PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC },
+#endif
 	/* AMD Generic, PCI class code and Vendor ID for HD Audio */
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
 	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 93d7499350c..418c5d1bada 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -466,8 +466,12 @@ static void print_codec_info(struct snd_info_entry *entry,
 	hda_nid_t nid;
 	int i, nodes;
 
-	snd_iprintf(buffer, "Codec: %s\n",
-		    codec->name ? codec->name : "Not Set");
+	snd_iprintf(buffer, "Codec: ");
+	if (codec->vendor_name && codec->chip_name)
+		snd_iprintf(buffer, "%s %s\n",
+			    codec->vendor_name, codec->chip_name);
+	else
+		snd_iprintf(buffer, "Not Set\n");
 	snd_iprintf(buffer, "Address: %d\n", codec->addr);
 	snd_iprintf(buffer, "Function Id: 0x%x\n", codec->function_id);
 	snd_iprintf(buffer, "Vendor Id: 0x%08x\n", codec->vendor_id);
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
new file mode 100644
index 00000000000..392d108c355
--- /dev/null
+++ b/sound/pci/hda/patch_ca0110.c
@@ -0,0 +1,573 @@
+/*
+ * HD audio interface patch for Creative X-Fi CA0110-IBG chip
+ *
+ * Copyright (c) 2008 Takashi Iwai <tiwai@suse.de>
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <sound/core.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+/*
+ */
+
+struct ca0110_spec {
+	struct auto_pin_cfg autocfg;
+	struct hda_multi_out multiout;
+	hda_nid_t out_pins[AUTO_CFG_MAX_OUTS];
+	hda_nid_t dacs[AUTO_CFG_MAX_OUTS];
+	hda_nid_t hp_dac;
+	hda_nid_t input_pins[AUTO_PIN_LAST];
+	hda_nid_t adcs[AUTO_PIN_LAST];
+	hda_nid_t dig_out;
+	hda_nid_t dig_in;
+	unsigned int num_inputs;
+	const char *input_labels[AUTO_PIN_LAST];
+	struct hda_pcm pcm_rec[2];	/* PCM information */
+};
+
+/*
+ * PCM callbacks
+ */
+static int ca0110_playback_pcm_open(struct hda_pcm_stream *hinfo,
+				    struct hda_codec *codec,
+				    struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
+					     hinfo);
+}
+
+static int ca0110_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       unsigned int stream_tag,
+				       unsigned int format,
+				       struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
+						stream_tag, format, substream);
+}
+
+static int ca0110_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Digital out
+ */
+static int ca0110_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
+}
+
+static int ca0110_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
+					 struct hda_codec *codec,
+					 struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int ca0110_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+					   struct hda_codec *codec,
+					   unsigned int stream_tag,
+					   unsigned int format,
+					   struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+					     format, substream);
+}
+
+/*
+ * Analog capture
+ */
+static int ca0110_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+				      struct hda_codec *codec,
+				      unsigned int stream_tag,
+				      unsigned int format,
+				      struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+
+	snd_hda_codec_setup_stream(codec, spec->adcs[substream->number],
+				   stream_tag, 0, format);
+	return 0;
+}
+
+static int ca0110_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				      struct hda_codec *codec,
+				      struct snd_pcm_substream *substream)
+{
+	struct ca0110_spec *spec = codec->spec;
+
+	snd_hda_codec_cleanup_stream(codec, spec->adcs[substream->number]);
+	return 0;
+}
+
+/*
+ */
+
+static char *dirstr[2] = { "Playback", "Capture" };
+
+static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
+		       int chan, int dir)
+{
+	char namestr[44];
+	int type = dir ? HDA_INPUT : HDA_OUTPUT;
+	struct snd_kcontrol_new knew =
+		HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type);
+	sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
+	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+}
+
+static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
+		       int chan, int dir)
+{
+	char namestr[44];
+	int type = dir ? HDA_INPUT : HDA_OUTPUT;
+	struct snd_kcontrol_new knew =
+		HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type);
+	sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]);
+	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+}
+
+#define add_out_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 0)
+#define add_out_volume(codec, nid, pfx)	_add_volume(codec, nid, pfx, 3, 0)
+#define add_in_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 1)
+#define add_in_volume(codec, nid, pfx)	_add_volume(codec, nid, pfx, 3, 1)
+#define add_mono_switch(codec, nid, pfx, chan) \
+	_add_switch(codec, nid, pfx, chan, 0)
+#define add_mono_volume(codec, nid, pfx, chan) \
+	_add_volume(codec, nid, pfx, chan, 0)
+
+static int ca0110_build_controls(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	static char *prefix[AUTO_CFG_MAX_OUTS] = {
+		"Front", "Surround", NULL, "Side", "Multi"
+	};
+	hda_nid_t mutenid;
+	int i, err;
+
+	for (i = 0; i < spec->multiout.num_dacs; i++) {
+		if (get_wcaps(codec, spec->out_pins[i]) & AC_WCAP_OUT_AMP)
+			mutenid = spec->out_pins[i];
+		else
+			mutenid = spec->multiout.dac_nids[i];
+		if (!prefix[i]) {
+			err = add_mono_switch(codec, mutenid,
+					      "Center", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_switch(codec, mutenid,
+					      "LFE", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_volume(codec, spec->multiout.dac_nids[i],
+					      "Center", 1);
+			if (err < 0)
+				return err;
+			err = add_mono_volume(codec, spec->multiout.dac_nids[i],
+					      "LFE", 1);
+			if (err < 0)
+				return err;
+		} else {
+			err = add_out_switch(codec, mutenid,
+					     prefix[i]);
+			if (err < 0)
+				return err;
+			err = add_out_volume(codec, spec->multiout.dac_nids[i],
+					 prefix[i]);
+			if (err < 0)
+				return err;
+		}
+	}
+	if (cfg->hp_outs) {
+		if (get_wcaps(codec, cfg->hp_pins[0]) & AC_WCAP_OUT_AMP)
+			mutenid = cfg->hp_pins[0];
+		else
+			mutenid = spec->multiout.dac_nids[i];
+
+		err = add_out_switch(codec, mutenid, "Headphone");
+		if (err < 0)
+			return err;
+		if (spec->hp_dac) {
+			err = add_out_volume(codec, spec->hp_dac, "Headphone");
+			if (err < 0)
+				return err;
+		}
+	}
+	for (i = 0; i < spec->num_inputs; i++) {
+		const char *label = spec->input_labels[i];
+		if (get_wcaps(codec, spec->input_pins[i]) & AC_WCAP_IN_AMP)
+			mutenid = spec->input_pins[i];
+		else
+			mutenid = spec->adcs[i];
+		err = add_in_switch(codec, mutenid, label);
+		if (err < 0)
+			return err;
+		err = add_in_volume(codec, spec->adcs[i], label);
+		if (err < 0)
+			return err;
+	}
+
+	if (spec->dig_out) {
+		err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out);
+		if (err < 0)
+			return err;
+		err = snd_hda_create_spdif_share_sw(codec, &spec->multiout);
+		if (err < 0)
+			return err;
+		spec->multiout.share_spdif = 1;
+	}
+	if (spec->dig_in) {
+		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
+		if (err < 0)
+			return err;
+		err = add_in_volume(codec, spec->dig_in, "IEC958");
+	}
+	return 0;
+}
+
+/*
+ */
+static struct hda_pcm_stream ca0110_pcm_analog_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 8,
+	.ops = {
+		.open = ca0110_playback_pcm_open,
+		.prepare = ca0110_playback_pcm_prepare,
+		.cleanup = ca0110_playback_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_analog_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.ops = {
+		.prepare = ca0110_capture_pcm_prepare,
+		.cleanup = ca0110_capture_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_digital_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.ops = {
+		.open = ca0110_dig_playback_pcm_open,
+		.close = ca0110_dig_playback_pcm_close,
+		.prepare = ca0110_dig_playback_pcm_prepare
+	},
+};
+
+static struct hda_pcm_stream ca0110_pcm_digital_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static int ca0110_build_pcms(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
+
+	codec->pcm_info = info;
+	codec->num_pcms = 0;
+
+	info->name = "CA0110 Analog";
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0110_pcm_analog_playback;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0];
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
+		spec->multiout.max_channels;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0110_pcm_analog_capture;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_inputs;
+	info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
+	codec->num_pcms++;
+
+	if (!spec->dig_out && !spec->dig_in)
+		return 0;
+
+	info++;
+	info->name = "CA0110 Digital";
+	info->pcm_type = HDA_PCM_TYPE_SPDIF;
+	if (spec->dig_out) {
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+			ca0110_pcm_digital_playback;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out;
+	}
+	if (spec->dig_in) {
+		info->stream[SNDRV_PCM_STREAM_CAPTURE] =
+			ca0110_pcm_digital_capture;
+		info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
+	}
+	codec->num_pcms++;
+
+	return 0;
+}
+
+static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac)
+{
+	if (pin) {
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+		if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP)
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE,
+					    AMP_OUT_UNMUTE);
+	}
+	if (dac)
+		snd_hda_codec_write(codec, dac, 0,
+				    AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO);
+}
+
+static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc)
+{
+	if (pin) {
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80);
+		if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP)
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_AMP_GAIN_MUTE,
+					    AMP_IN_UNMUTE(0));
+	}
+	if (adc)
+		snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+				    AMP_IN_UNMUTE(0));
+}
+
+static int ca0110_init(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+
+	for (i = 0; i < spec->multiout.num_dacs; i++)
+		init_output(codec, spec->out_pins[i],
+			    spec->multiout.dac_nids[i]);
+	init_output(codec, cfg->hp_pins[0], spec->hp_dac);
+	init_output(codec, cfg->dig_out_pins[0], spec->dig_out);
+
+	for (i = 0; i < spec->num_inputs; i++)
+		init_input(codec, spec->input_pins[i], spec->adcs[i]);
+	init_input(codec, cfg->dig_in_pin, spec->dig_in);
+	return 0;
+}
+
+static void ca0110_free(struct hda_codec *codec)
+{
+	kfree(codec->spec);
+}
+
+static struct hda_codec_ops ca0110_patch_ops = {
+	.build_controls = ca0110_build_controls,
+	.build_pcms = ca0110_build_pcms,
+	.init = ca0110_init,
+	.free = ca0110_free,
+};
+
+
+static void parse_line_outs(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i, n;
+	unsigned int def_conf;
+	hda_nid_t nid;
+
+	n = 0;
+	for (i = 0; i < cfg->line_outs; i++) {
+		nid = cfg->line_out_pins[i];
+		def_conf = snd_hda_codec_get_pincfg(codec, nid);
+		if (!def_conf)
+			continue; /* invalid pin */
+		if (snd_hda_get_connections(codec, nid, &spec->dacs[i], 1) != 1)
+			continue;
+		spec->out_pins[n++] = nid;
+	}
+	spec->multiout.dac_nids = spec->dacs;
+	spec->multiout.num_dacs = n;
+	spec->multiout.max_channels = n * 2;
+}
+
+static void parse_hp_out(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+	unsigned int def_conf;
+	hda_nid_t nid, dac;
+
+	if (!cfg->hp_outs)
+		return;
+	nid = cfg->hp_pins[0];
+	def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	if (!def_conf) {
+		cfg->hp_outs = 0;
+		return;
+	}
+	if (snd_hda_get_connections(codec, nid, &dac, 1) != 1)
+		return;
+
+	for (i = 0; i < cfg->line_outs; i++)
+		if (dac == spec->dacs[i])
+			break;
+	if (i >= cfg->line_outs) {
+		spec->hp_dac = dac;
+		spec->multiout.hp_nid = dac;
+	}
+}
+
+static void parse_input(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	hda_nid_t nid, pin;
+	int n, i, j;
+
+	n = 0;
+	nid = codec->start_nid;
+	for (i = 0; i < codec->num_nodes; i++, nid++) {
+		unsigned int wcaps = get_wcaps(codec, nid);
+		unsigned int type = (wcaps & AC_WCAP_TYPE) >>
+			AC_WCAP_TYPE_SHIFT;
+		if (type != AC_WID_AUD_IN)
+			continue;
+		if (snd_hda_get_connections(codec, nid, &pin, 1) != 1)
+			continue;
+		if (pin == cfg->dig_in_pin) {
+			spec->dig_in = nid;
+			continue;
+		}
+		for (j = 0; j < AUTO_PIN_LAST; j++)
+			if (cfg->input_pins[j] == pin)
+				break;
+		if (j >= AUTO_PIN_LAST)
+			continue;
+		spec->input_pins[n] = pin;
+		spec->input_labels[n] = auto_pin_cfg_labels[j];
+		spec->adcs[n] = nid;
+		n++;
+	}
+	spec->num_inputs = n;
+}
+
+static void parse_digital(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+
+	if (cfg->dig_outs &&
+	    snd_hda_get_connections(codec, cfg->dig_out_pins[0],
+				    &spec->dig_out, 1) == 1)
+		spec->multiout.dig_out_nid = cfg->dig_out_pins[0];
+}
+
+static int ca0110_parse_auto_config(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec = codec->spec;
+	int err;
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+	if (err < 0)
+		return err;
+
+	parse_line_outs(codec);
+	parse_hp_out(codec);
+	parse_digital(codec);
+	parse_input(codec);
+	return 0;
+}
+
+
+int patch_ca0110(struct hda_codec *codec)
+{
+	struct ca0110_spec *spec;
+	int err;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (!spec)
+		return -ENOMEM;
+	codec->spec = spec;
+
+	codec->bus->needs_damn_long_delay = 1;
+
+	err = ca0110_parse_auto_config(codec);
+	if (err < 0)
+		goto error;
+
+	codec->patch_ops = ca0110_patch_ops;
+
+	return 0;
+
+ error:
+	kfree(codec->spec);
+	codec->spec = NULL;
+	return err;
+}
+
+
+/*
+ * patch entries
+ */
+static struct hda_codec_preset snd_hda_preset_ca0110[] = {
+	{ .id = 0x1102000a, .name = "CA0110-IBG", .patch = patch_ca0110 },
+	{ .id = 0x1102000b, .name = "CA0110-IBG", .patch = patch_ca0110 },
+	{ .id = 0x1102000d, .name = "SB0880 X-Fi", .patch = patch_ca0110 },
+	{} /* terminator */
+};
+
+MODULE_ALIAS("snd-hda-codec-id:1102000a");
+MODULE_ALIAS("snd-hda-codec-id:1102000b");
+MODULE_ALIAS("snd-hda-codec-id:1102000d");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Creative CA0110-IBG HD-audio codec");
+
+static struct hda_codec_preset_list ca0110_list = {
+	.preset = snd_hda_preset_ca0110,
+	.owner = THIS_MODULE,
+};
+
+static int __init patch_ca0110_init(void)
+{
+	return snd_hda_add_codec_preset(&ca0110_list);
+}
+
+static void __exit patch_ca0110_exit(void)
+{
+	snd_hda_delete_codec_preset(&ca0110_list);
+}
+
+module_init(patch_ca0110_init)
+module_exit(patch_ca0110_exit)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 56ce19e68cb..4fcbe21829a 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1848,6 +1848,7 @@ static const char *cxt5051_models[CXT5051_MODELS] = {
 
 static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736),
+	SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP),
 	SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
 		      CXT5051_LAPTOP),
 	SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index d57d8132a06..f5792e2eea8 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -35,9 +35,28 @@ struct nvhdmi_spec {
 	struct hda_pcm pcm_rec;
 };
 
+#define Nv_VERB_SET_Channel_Allocation          0xF79
+#define Nv_VERB_SET_Info_Frame_Checksum         0xF7A
+#define Nv_VERB_SET_Audio_Protection_On         0xF98
+#define Nv_VERB_SET_Audio_Protection_Off        0xF99
+
+#define Nv_Master_Convert_nid   0x04
+#define Nv_Master_Pin_nid       0x05
+
+static hda_nid_t nvhdmi_convert_nids[4] = {
+	/*front, rear, clfe, rear_surr */
+	0x6, 0x8, 0xa, 0xc,
+};
+
 static struct hda_verb nvhdmi_basic_init[] = {
+	/* set audio protect on */
+	{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
 	/* enable digital output on pin widget */
-	{ 0x05, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x5, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0x7, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0x9, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0xb, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
+	{ 0xd, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x5 },
 	{} /* terminator */
 };
 
@@ -66,48 +85,205 @@ static int nvhdmi_init(struct hda_codec *codec)
  * Digital out
  */
 static int nvhdmi_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
-				     struct hda_codec *codec,
-				     struct snd_pcm_substream *substream)
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
-				      struct hda_codec *codec,
-				      struct snd_pcm_substream *substream)
+static int nvhdmi_dig_playback_pcm_close_8ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
+	int i;
+
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid,
+			0, AC_VERB_SET_CHANNEL_STREAMID, 0);
+	for (i = 0; i < 4; i++) {
+		/* set the stream id */
+		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+				AC_VERB_SET_CHANNEL_STREAMID, 0);
+		/* set the stream format */
+		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+				AC_VERB_SET_STREAM_FORMAT, 0);
+	}
+
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
-					    struct hda_codec *codec,
-					    unsigned int stream_tag,
-					    unsigned int format,
-					    struct snd_pcm_substream *substream)
+static int nvhdmi_dig_playback_pcm_close_2ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct nvhdmi_spec *spec = codec->spec;
+	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
+{
+	int chs;
+	unsigned int dataDCC1, dataDCC2, chan, chanmask, channel_id;
+	int i;
+
+	mutex_lock(&codec->spdif_mutex);
+
+	chs = substream->runtime->channels;
+	chan = chs ? (chs - 1) : 1;
+
+	switch (chs) {
+	default:
+	case 0:
+	case 2:
+		chanmask = 0x00;
+		break;
+	case 4:
+		chanmask = 0x08;
+		break;
+	case 6:
+		chanmask = 0x0b;
+		break;
+	case 8:
+		chanmask = 0x13;
+		break;
+	}
+	dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT;
+	dataDCC2 = 0x2;
+
+	/* set the Audio InforFrame Channel Allocation */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Channel_Allocation, chanmask);
+
+	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
+	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+
+	/* set the stream id */
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+			AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0);
+
+	/* set the stream format */
+	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+			AC_VERB_SET_STREAM_FORMAT, format);
+
+	/* turn on again (if needed) */
+	/* enable and set the channel status audio/data flag */
+	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & 0xff);
+		snd_hda_codec_write(codec,
+				Nv_Master_Convert_nid,
+				0,
+				AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
+	}
+
+	for (i = 0; i < 4; i++) {
+		if (chs == 2)
+			channel_id = 0;
+		else
+			channel_id = i * 2;
+
+		/* turn off SPDIF once;
+		 *otherwise the IEC958 bits won't be updated
+		 */
+		if (codec->spdif_status_reset &&
+		(codec->spdif_ctls & AC_DIG1_ENABLE))
+			snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_DIGI_CONVERT_1,
+				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+		/* set the stream id */
+		snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_CHANNEL_STREAMID,
+				(stream_tag << 4) | channel_id);
+		/* set the stream format */
+		snd_hda_codec_write(codec,
+				nvhdmi_convert_nids[i],
+				0,
+				AC_VERB_SET_STREAM_FORMAT,
+				format);
+		/* turn on again (if needed) */
+		/* enable and set the channel status audio/data flag */
+		if (codec->spdif_status_reset &&
+		(codec->spdif_ctls & AC_DIG1_ENABLE)) {
+			snd_hda_codec_write(codec,
+					nvhdmi_convert_nids[i],
+					0,
+					AC_VERB_SET_DIGI_CONVERT_1,
+					codec->spdif_ctls & 0xff);
+			snd_hda_codec_write(codec,
+					nvhdmi_convert_nids[i],
+					0,
+					AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
+		}
+	}
+
+	/* set the Audio Info Frame Checksum */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Info_Frame_Checksum,
+			(0x71 - chan - chanmask));
+
+	mutex_unlock(&codec->spdif_mutex);
+	return 0;
+}
+
+static int nvhdmi_dig_playback_pcm_prepare_2ch(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
-					     format, substream);
+					format, substream);
 }
 
-static struct hda_pcm_stream nvhdmi_pcm_digital_playback = {
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 8,
+	.nid = Nv_Master_Convert_nid,
+	.rates = SNDRV_PCM_RATE_48000,
+	.maxbps = 16,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.ops = {
+		.open = nvhdmi_dig_playback_pcm_open,
+		.close = nvhdmi_dig_playback_pcm_close_8ch,
+		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch
+	},
+};
+
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = {
 	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
-	.nid = 0x4, /* NID to query formats and rates and setup streams */
+	.nid = Nv_Master_Convert_nid,
 	.rates = SNDRV_PCM_RATE_48000,
 	.maxbps = 16,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
-		.close = nvhdmi_dig_playback_pcm_close,
-		.prepare = nvhdmi_dig_playback_pcm_prepare
+		.close = nvhdmi_dig_playback_pcm_close_2ch,
+		.prepare = nvhdmi_dig_playback_pcm_prepare_2ch
 	},
 };
 
-static int nvhdmi_build_pcms(struct hda_codec *codec)
+static int nvhdmi_build_pcms_8ch(struct hda_codec *codec)
 {
 	struct nvhdmi_spec *spec = codec->spec;
 	struct hda_pcm *info = &spec->pcm_rec;
@@ -117,7 +293,24 @@ static int nvhdmi_build_pcms(struct hda_codec *codec)
 
 	info->name = "NVIDIA HDMI";
 	info->pcm_type = HDA_PCM_TYPE_HDMI;
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = nvhdmi_pcm_digital_playback;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_8ch;
+
+	return 0;
+}
+
+static int nvhdmi_build_pcms_2ch(struct hda_codec *codec)
+{
+	struct nvhdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = &spec->pcm_rec;
+
+	codec->num_pcms = 1;
+	codec->pcm_info = info;
+
+	info->name = "NVIDIA HDMI";
+	info->pcm_type = HDA_PCM_TYPE_HDMI;
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_2ch;
 
 	return 0;
 }
@@ -127,14 +320,40 @@ static void nvhdmi_free(struct hda_codec *codec)
 	kfree(codec->spec);
 }
 
-static struct hda_codec_ops nvhdmi_patch_ops = {
+static struct hda_codec_ops nvhdmi_patch_ops_8ch = {
+	.build_controls = nvhdmi_build_controls,
+	.build_pcms = nvhdmi_build_pcms_8ch,
+	.init = nvhdmi_init,
+	.free = nvhdmi_free,
+};
+
+static struct hda_codec_ops nvhdmi_patch_ops_2ch = {
 	.build_controls = nvhdmi_build_controls,
-	.build_pcms = nvhdmi_build_pcms,
+	.build_pcms = nvhdmi_build_pcms_2ch,
 	.init = nvhdmi_init,
 	.free = nvhdmi_free,
 };
 
-static int patch_nvhdmi(struct hda_codec *codec)
+static int patch_nvhdmi_8ch(struct hda_codec *codec)
+{
+	struct nvhdmi_spec *spec;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	spec->multiout.num_dacs = 0;  /* no analog */
+	spec->multiout.max_channels = 8;
+	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+
+	codec->patch_ops = nvhdmi_patch_ops_8ch;
+
+	return 0;
+}
+
+static int patch_nvhdmi_2ch(struct hda_codec *codec)
 {
 	struct nvhdmi_spec *spec;
 
@@ -144,13 +363,11 @@ static int patch_nvhdmi(struct hda_codec *codec)
 
 	codec->spec = spec;
 
-	spec->multiout.num_dacs = 0;	  /* no analog */
+	spec->multiout.num_dacs = 0;  /* no analog */
 	spec->multiout.max_channels = 2;
-	spec->multiout.dig_out_nid = 0x4; /* NID for copying analog to digital,
-					   * seems to be unused in pure-digital
-					   * case. */
+	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
 
-	codec->patch_ops = nvhdmi_patch_ops;
+	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
 	return 0;
 }
@@ -159,11 +376,11 @@ static int patch_nvhdmi(struct hda_codec *codec)
  * patch entries
  */
 static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
-	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi },
-	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi },
+	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
+	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
+	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
 	{} /* terminator */
 };
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b8a0d3e7927..337d2a59c67 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -190,6 +190,7 @@ enum {
 	ALC663_ASUS_MODE6,
 	ALC272_DELL,
 	ALC272_DELL_ZM1,
+	ALC272_SAMSUNG_NC10,
 	ALC662_AUTO,
 	ALC662_MODEL_LAST,
 };
@@ -205,6 +206,7 @@ enum {
 	ALC882_ASUS_A7M,
 	ALC885_MACPRO,
 	ALC885_MBP3,
+	ALC885_MB5,
 	ALC885_IMAC24,
 	ALC882_AUTO,
 	ALC882_MODEL_LAST,
@@ -218,9 +220,11 @@ enum {
 	ALC883_6ST_DIG,
 	ALC883_TARGA_DIG,
 	ALC883_TARGA_2ch_DIG,
+	ALC883_TARGA_8ch_DIG,
 	ALC883_ACER,
 	ALC883_ACER_ASPIRE,
 	ALC888_ACER_ASPIRE_4930G,
+	ALC888_ACER_ASPIRE_8930G,
 	ALC883_MEDION,
 	ALC883_MEDION_MD2,
 	ALC883_LAPTOP_EAPD,
@@ -238,7 +242,9 @@ enum {
 	ALC883_3ST_6ch_INTEL,
 	ALC888_ASUS_M90V,
 	ALC888_ASUS_EEE1601,
+	ALC889A_MB31,
 	ALC1200_ASUS_P5Q,
+	ALC883_SONY_VAIO_TT,
 	ALC883_AUTO,
 	ALC883_MODEL_LAST,
 };
@@ -253,6 +259,15 @@ enum {
 /* for GPIO Poll */
 #define GPIO_MASK	0x03
 
+/* extra amp-initialization sequence types */
+enum {
+	ALC_INIT_NONE,
+	ALC_INIT_DEFAULT,
+	ALC_INIT_GPIO1,
+	ALC_INIT_GPIO2,
+	ALC_INIT_GPIO3,
+};
+
 struct alc_spec {
 	/* codec parameterization */
 	struct snd_kcontrol_new *mixers[5];	/* mixer arrays */
@@ -266,13 +281,13 @@ struct alc_spec {
 						 */
 	unsigned int num_init_verbs;
 
-	char *stream_name_analog;	/* analog PCM stream */
+	char stream_name_analog[16];	/* analog PCM stream */
 	struct hda_pcm_stream *stream_analog_playback;
 	struct hda_pcm_stream *stream_analog_capture;
 	struct hda_pcm_stream *stream_analog_alt_playback;
 	struct hda_pcm_stream *stream_analog_alt_capture;
 
-	char *stream_name_digital;	/* digital PCM stream */
+	char stream_name_digital[16];	/* digital PCM stream */
 	struct hda_pcm_stream *stream_digital_playback;
 	struct hda_pcm_stream *stream_digital_capture;
 
@@ -301,6 +316,8 @@ struct alc_spec {
 	const struct hda_channel_mode *channel_mode;
 	int num_channel_mode;
 	int need_dac_fix;
+	int const_channel_count;
+	int ext_channel_count;
 
 	/* PCM information */
 	struct hda_pcm pcm_rec[3];	/* used in alc_build_pcms() */
@@ -322,6 +339,7 @@ struct alc_spec {
 
 	/* other flags */
 	unsigned int no_analog :1; /* digital I/O only */
+	int init_amp;
 
 	/* for virtual master */
 	hda_nid_t vmaster_nid;
@@ -355,6 +373,7 @@ struct alc_config_preset {
 	unsigned int num_channel_mode;
 	const struct hda_channel_mode *channel_mode;
 	int need_dac_fix;
+	int const_channel_count;
 	unsigned int num_mux_defs;
 	const struct hda_input_mux *input_mux;
 	void (*unsol_event)(struct hda_codec *, unsigned int);
@@ -449,7 +468,7 @@ static int alc_ch_mode_get(struct snd_kcontrol *kcontrol,
 	struct alc_spec *spec = codec->spec;
 	return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
 				   spec->num_channel_mode,
-				   spec->multiout.max_channels);
+				   spec->ext_channel_count);
 }
 
 static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
@@ -459,9 +478,12 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
 	struct alc_spec *spec = codec->spec;
 	int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
 				      spec->num_channel_mode,
-				      &spec->multiout.max_channels);
-	if (err >= 0 && spec->need_dac_fix)
-		spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+				      &spec->ext_channel_count);
+	if (err >= 0 && !spec->const_channel_count) {
+		spec->multiout.max_channels = spec->ext_channel_count;
+		if (spec->need_dac_fix)
+			spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+	}
 	return err;
 }
 
@@ -776,6 +798,12 @@ static void alc_set_input_pin(struct hda_codec *codec, hda_nid_t nid,
 		pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
 		if (pincap & AC_PINCAP_VREF_80)
 			val = PIN_VREF80;
+		else if (pincap & AC_PINCAP_VREF_50)
+			val = PIN_VREF50;
+		else if (pincap & AC_PINCAP_VREF_100)
+			val = PIN_VREF100;
+		else if (pincap & AC_PINCAP_VREF_GRD)
+			val = PIN_VREFGRD;
 	}
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, val);
 }
@@ -835,8 +863,13 @@ static void setup_preset(struct alc_spec *spec,
 	spec->channel_mode = preset->channel_mode;
 	spec->num_channel_mode = preset->num_channel_mode;
 	spec->need_dac_fix = preset->need_dac_fix;
+	spec->const_channel_count = preset->const_channel_count;
 
-	spec->multiout.max_channels = spec->channel_mode[0].channels;
+	if (preset->const_channel_count)
+		spec->multiout.max_channels = preset->const_channel_count;
+	else
+		spec->multiout.max_channels = spec->channel_mode[0].channels;
+	spec->ext_channel_count = spec->channel_mode[0].channels;
 
 	spec->multiout.num_dacs = preset->num_dacs;
 	spec->multiout.dac_nids = preset->dac_nids;
@@ -915,20 +948,26 @@ static void alc_fix_pll_init(struct hda_codec *codec, hda_nid_t nid,
 	alc_fix_pll(codec);
 }
 
-static void alc_sku_automute(struct hda_codec *codec)
+static void alc_automute_pin(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	unsigned int present;
-	unsigned int hp_nid = spec->autocfg.hp_pins[0];
-	unsigned int sp_nid = spec->autocfg.speaker_pins[0];
+	unsigned int nid = spec->autocfg.hp_pins[0];
+	int i;
 
 	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, hp_nid, 0,
+	snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, nid, 0,
 				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
-	snd_hda_codec_write(codec, sp_nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    spec->jack_present ? 0 : PIN_OUT);
+	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+		nid = spec->autocfg.speaker_pins[i];
+		if (!nid)
+			break;
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    spec->jack_present ? 0 : PIN_OUT);
+	}
 }
 
 #if 0 /* it's broken in some acses -- temporarily disabled */
@@ -963,16 +1002,19 @@ static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res)
 		res >>= 28;
 	else
 		res >>= 26;
-	if (res == ALC880_HP_EVENT)
-		alc_sku_automute(codec);
-
-	if (res == ALC880_MIC_EVENT)
+	switch (res) {
+	case ALC880_HP_EVENT:
+		alc_automute_pin(codec);
+		break;
+	case ALC880_MIC_EVENT:
 		alc_mic_automute(codec);
+		break;
+	}
 }
 
 static void alc_inithook(struct hda_codec *codec)
 {
-	alc_sku_automute(codec);
+	alc_automute_pin(codec);
 	alc_mic_automute(codec);
 }
 
@@ -994,69 +1036,21 @@ static void alc888_coef_init(struct hda_codec *codec)
 				    AC_VERB_SET_PROC_COEF, 0x3030);
 }
 
-/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
- *	31 ~ 16 :	Manufacture ID
- *	15 ~ 8	:	SKU ID
- *	7  ~ 0	:	Assembly ID
- *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
- */
-static void alc_subsystem_id(struct hda_codec *codec,
-			     unsigned int porta, unsigned int porte,
-			     unsigned int portd)
+static void alc_auto_init_amp(struct hda_codec *codec, int type)
 {
-	unsigned int ass, tmp, i;
-	unsigned nid;
-	struct alc_spec *spec = codec->spec;
-
-	ass = codec->subsystem_id & 0xffff;
-	if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
-		goto do_sku;
-
-	/*
-	 * 31~30	: port conetcivity
-	 * 29~21	: reserve
-	 * 20		: PCBEEP input
-	 * 19~16	: Check sum (15:1)
-	 * 15~1		: Custom
-	 * 0		: override
-	*/
-	nid = 0x1d;
-	if (codec->vendor_id == 0x10ec0260)
-		nid = 0x17;
-	ass = snd_hda_codec_get_pincfg(codec, nid);
-	if (!(ass & 1) && !(ass & 0x100000))
-		return;
-	if ((ass >> 30) != 1)	/* no physical connection */
-		return;
+	unsigned int tmp;
 
-	/* check sum */
-	tmp = 0;
-	for (i = 1; i < 16; i++) {
-		if ((ass >> i) & 1)
-			tmp++;
-	}
-	if (((ass >> 16) & 0xf) != tmp)
-		return;
-do_sku:
-	/*
-	 * 0 : override
-	 * 1 :	Swap Jack
-	 * 2 : 0 --> Desktop, 1 --> Laptop
-	 * 3~5 : External Amplifier control
-	 * 7~6 : Reserved
-	*/
-	tmp = (ass & 0x38) >> 3;	/* external Amp control */
-	switch (tmp) {
-	case 1:
+	switch (type) {
+	case ALC_INIT_GPIO1:
 		snd_hda_sequence_write(codec, alc_gpio1_init_verbs);
 		break;
-	case 3:
+	case ALC_INIT_GPIO2:
 		snd_hda_sequence_write(codec, alc_gpio2_init_verbs);
 		break;
-	case 7:
+	case ALC_INIT_GPIO3:
 		snd_hda_sequence_write(codec, alc_gpio3_init_verbs);
 		break;
-	case 5:	/* set EAPD output high */
+	case ALC_INIT_DEFAULT:
 		switch (codec->vendor_id) {
 		case 0x10ec0260:
 			snd_hda_codec_write(codec, 0x0f, 0,
@@ -1110,7 +1104,7 @@ do_sku:
 					    tmp | 0x2010);
 			break;
 		case 0x10ec0888:
-			/*alc888_coef_init(codec);*/ /* called in alc_init() */
+			alc888_coef_init(codec);
 			break;
 		case 0x10ec0267:
 		case 0x10ec0268:
@@ -1125,7 +1119,107 @@ do_sku:
 					    tmp | 0x3000);
 			break;
 		}
-	default:
+		break;
+	}
+}
+
+static void alc_init_auto_hp(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (!spec->autocfg.hp_pins[0])
+		return;
+
+	if (!spec->autocfg.speaker_pins[0]) {
+		if (spec->autocfg.line_out_pins[0] &&
+		    spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT)
+			spec->autocfg.speaker_pins[0] =
+				spec->autocfg.line_out_pins[0];
+		else
+			return;
+	}
+
+	snd_printdd("realtek: Enable HP auto-muting on NID 0x%x\n",
+		    spec->autocfg.hp_pins[0]);
+	snd_hda_codec_write_cache(codec, spec->autocfg.hp_pins[0], 0,
+				  AC_VERB_SET_UNSOLICITED_ENABLE,
+				  AC_USRSP_EN | ALC880_HP_EVENT);
+	spec->unsol_event = alc_sku_unsol_event;
+}
+
+/* check subsystem ID and set up device-specific initialization;
+ * return 1 if initialized, 0 if invalid SSID
+ */
+/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
+ *	31 ~ 16 :	Manufacture ID
+ *	15 ~ 8	:	SKU ID
+ *	7  ~ 0	:	Assembly ID
+ *	port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
+ */
+static int alc_subsystem_id(struct hda_codec *codec,
+			    hda_nid_t porta, hda_nid_t porte,
+			    hda_nid_t portd)
+{
+	unsigned int ass, tmp, i;
+	unsigned nid;
+	struct alc_spec *spec = codec->spec;
+
+	ass = codec->subsystem_id & 0xffff;
+	if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
+		goto do_sku;
+
+	/* invalid SSID, check the special NID pin defcfg instead */
+	/*
+	 * 31~30	: port conetcivity
+	 * 29~21	: reserve
+	 * 20		: PCBEEP input
+	 * 19~16	: Check sum (15:1)
+	 * 15~1		: Custom
+	 * 0		: override
+	*/
+	nid = 0x1d;
+	if (codec->vendor_id == 0x10ec0260)
+		nid = 0x17;
+	ass = snd_hda_codec_get_pincfg(codec, nid);
+	snd_printd("realtek: No valid SSID, "
+		   "checking pincfg 0x%08x for NID 0x%x\n",
+		   ass, nid);
+	if (!(ass & 1) && !(ass & 0x100000))
+		return 0;
+	if ((ass >> 30) != 1)	/* no physical connection */
+		return 0;
+
+	/* check sum */
+	tmp = 0;
+	for (i = 1; i < 16; i++) {
+		if ((ass >> i) & 1)
+			tmp++;
+	}
+	if (((ass >> 16) & 0xf) != tmp)
+		return 0;
+do_sku:
+	snd_printd("realtek: Enabling init ASM_ID=0x%04x CODEC_ID=%08x\n",
+		   ass & 0xffff, codec->vendor_id);
+	/*
+	 * 0 : override
+	 * 1 :	Swap Jack
+	 * 2 : 0 --> Desktop, 1 --> Laptop
+	 * 3~5 : External Amplifier control
+	 * 7~6 : Reserved
+	*/
+	tmp = (ass & 0x38) >> 3;	/* external Amp control */
+	switch (tmp) {
+	case 1:
+		spec->init_amp = ALC_INIT_GPIO1;
+		break;
+	case 3:
+		spec->init_amp = ALC_INIT_GPIO2;
+		break;
+	case 7:
+		spec->init_amp = ALC_INIT_GPIO3;
+		break;
+	case 5:
+		spec->init_amp = ALC_INIT_DEFAULT;
 		break;
 	}
 
@@ -1133,7 +1227,7 @@ do_sku:
 	 * when the external headphone out jack is plugged"
 	 */
 	if (!(ass & 0x8000))
-		return;
+		return 1;
 	/*
 	 * 10~8 : Jack location
 	 * 12~11: Headphone out -> 00: PortA, 01: PortE, 02: PortD, 03: Resvered
@@ -1141,14 +1235,6 @@ do_sku:
 	 * 15   : 1 --> enable the function "Mute internal speaker
 	 *	        when the external headphone out jack is plugged"
 	 */
-	if (!spec->autocfg.speaker_pins[0]) {
-		if (spec->autocfg.line_out_pins[0])
-			spec->autocfg.speaker_pins[0] =
-				spec->autocfg.line_out_pins[0];
-		else
-			return;
-	}
-
 	if (!spec->autocfg.hp_pins[0]) {
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
 		if (tmp == 0)
@@ -1158,23 +1244,23 @@ do_sku:
 		else if (tmp == 2)
 			spec->autocfg.hp_pins[0] = portd;
 		else
-			return;
+			return 1;
 	}
-	if (spec->autocfg.hp_pins[0])
-		snd_hda_codec_write(codec, spec->autocfg.hp_pins[0], 0,
-			AC_VERB_SET_UNSOLICITED_ENABLE,
-			AC_USRSP_EN | ALC880_HP_EVENT);
 
-#if 0 /* it's broken in some acses -- temporarily disabled */
-	if (spec->autocfg.input_pins[AUTO_PIN_MIC] &&
-		spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC])
-		snd_hda_codec_write(codec,
-			spec->autocfg.input_pins[AUTO_PIN_MIC], 0,
-			AC_VERB_SET_UNSOLICITED_ENABLE,
-			AC_USRSP_EN | ALC880_MIC_EVENT);
-#endif /* disabled */
+	alc_init_auto_hp(codec);
+	return 1;
+}
 
-	spec->unsol_event = alc_sku_unsol_event;
+static void alc_ssid_check(struct hda_codec *codec,
+			   hda_nid_t porta, hda_nid_t porte, hda_nid_t portd)
+{
+	if (!alc_subsystem_id(codec, porta, porte, portd)) {
+		struct alc_spec *spec = codec->spec;
+		snd_printd("realtek: "
+			   "Enable default setup for auto mode as fallback\n");
+		spec->init_amp = ALC_INIT_DEFAULT;
+		alc_init_auto_hp(codec);
+	}
 }
 
 /*
@@ -1309,32 +1395,58 @@ static struct hda_verb alc888_fujitsu_xa3530_verbs[] = {
 	{}
 };
 
-static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec)
+static void alc_automute_amp(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int bits;
-	/* Line out presence */
-	present = snd_hda_codec_read(codec, 0x17, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	/* HP out presence */
-	present = present || snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
+	struct alc_spec *spec = codec->spec;
+	unsigned int val, mute;
+	hda_nid_t nid;
+	int i;
+
+	spec->jack_present = 0;
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) {
+		nid = spec->autocfg.hp_pins[i];
+		if (!nid)
+			break;
+		val = snd_hda_codec_read(codec, nid, 0,
+					 AC_VERB_GET_PIN_SENSE, 0);
+		if (val & AC_PINSENSE_PRESENCE) {
+			spec->jack_present = 1;
+			break;
+		}
+	}
+
+	mute = spec->jack_present ? HDA_AMP_MUTE : 0;
 	/* Toggle internal speakers muting */
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	/* Toggle internal bass muting */
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+		nid = spec->autocfg.speaker_pins[i];
+		if (!nid)
+			break;
+		snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+	}
 }
 
-static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec,
-		unsigned int res)
+static void alc_automute_amp_unsol_event(struct hda_codec *codec,
+					 unsigned int res)
 {
-	if (res >> 26 == ALC880_HP_EVENT)
-		alc888_fujitsu_xa3530_automute(codec);
+	if (codec->vendor_id == 0x10ec0880)
+		res >>= 28;
+	else
+		res >>= 26;
+	if (res == ALC880_HP_EVENT)
+		alc_automute_amp(codec);
 }
 
+static void alc888_fujitsu_xa3530_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x17; /* line-out */
+	spec->autocfg.hp_pins[1] = 0x1b; /* hp */
+	spec->autocfg.speaker_pins[0] = 0x14; /* speaker */
+	spec->autocfg.speaker_pins[1] = 0x15; /* bass */
+	alc_automute_amp(codec);
+}
 
 /*
  * ALC888 Acer Aspire 4930G model
@@ -1358,6 +1470,59 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = {
 	{ }
 };
 
+/*
+ * ALC889 Acer Aspire 8930G model
+ */
+
+static struct hda_verb alc889_acer_aspire_8930g_verbs[] = {
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Connect Internal Front to Front */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Connect Internal Rear to Rear */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect Internal CLFE to CLFE */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect HP out to Front */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Enable all DACs */
+/*  DAC DISABLE/MUTE 1? */
+/*  setting bits 1-5 disables DAC nids 0x02-0x06 apparently. Init=0x38 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x03},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0000},
+/*  DAC DISABLE/MUTE 2? */
+/*  some bit here disables the other DACs. Init=0x4900 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x08},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0000},
+/* Enable amplifiers */
+	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+	{0x15, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+/* DMIC fix
+ * This laptop has a stereo digital microphone. The mics are only 1cm apart
+ * which makes the stereo useless. However, either the mic or the ALC889
+ * makes the signal become a difference/sum signal instead of standard
+ * stereo, which is annoying. So instead we flip this bit which makes the
+ * codec replicate the sum signal to both channels, turning it into a
+ * normal mono mic.
+ */
+/*  DMIC_CONTROL? Init value = 0x0001 */
+	{0x20, AC_VERB_SET_COEF_INDEX, 0x0b},
+	{0x20, AC_VERB_SET_PROC_COEF, 0x0003},
+	{ }
+};
+
 static struct hda_input_mux alc888_2_capture_sources[2] = {
 	/* Front mic only available on one ADC */
 	{
@@ -1379,6 +1544,38 @@ static struct hda_input_mux alc888_2_capture_sources[2] = {
 	}
 };
 
+static struct hda_input_mux alc889_capture_sources[3] = {
+	/* Digital mic only available on first "ADC" */
+	{
+		.num_items = 5,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Front Mic", 0xb },
+			{ "Input Mix", 0xa },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
+		},
+	},
+	{
+		.num_items = 4,
+		.items = {
+			{ "Mic", 0x0 },
+			{ "Line", 0x2 },
+			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
+		},
+	}
+};
+
 static struct snd_kcontrol_new alc888_base_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -1401,22 +1598,24 @@ static struct snd_kcontrol_new alc888_base_mixer[] = {
 	{ } /* end */
 };
 
-static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec)
+static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int bits;
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
-static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec,
-		unsigned int res)
+static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
 {
-	if (res >> 26 == ALC880_HP_EVENT)
-		alc888_acer_aspire_4930g_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x1b;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -2384,21 +2583,6 @@ static struct hda_verb alc880_beep_init_verbs[] = {
 	{ }
 };
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc880_uniwill_hp_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
 /* auto-toggle front mic */
 static void alc880_uniwill_mic_automute(struct hda_codec *codec)
 {
@@ -2411,9 +2595,14 @@ static void alc880_uniwill_mic_automute(struct hda_codec *codec)
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
 }
 
-static void alc880_uniwill_automute(struct hda_codec *codec)
+static void alc880_uniwill_init_hook(struct hda_codec *codec)
 {
-	alc880_uniwill_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x16;
+	alc_automute_amp(codec);
 	alc880_uniwill_mic_automute(codec);
 }
 
@@ -2424,24 +2613,22 @@ static void alc880_uniwill_unsol_event(struct hda_codec *codec,
 	 * definition.  4bit tag is placed at 28 bit!
 	 */
 	switch (res >> 28) {
-	case ALC880_HP_EVENT:
-		alc880_uniwill_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc880_uniwill_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
-static void alc880_uniwill_p53_hp_automute(struct hda_codec *codec)
+static void alc880_uniwill_p53_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, HDA_AMP_MUTE, bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
 static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
@@ -2463,10 +2650,10 @@ static void alc880_uniwill_p53_unsol_event(struct hda_codec *codec,
 	/* Looks like the unsol event is incompatible with the standard
 	 * definition.  4bit tag is placed at 28 bit!
 	 */
-	if ((res >> 28) == ALC880_HP_EVENT)
-		alc880_uniwill_p53_hp_automute(codec);
 	if ((res >> 28) == ALC880_DCVOL_EVENT)
 		alc880_uniwill_p53_dcvol_automute(codec);
+	else
+		alc_automute_amp_unsol_event(codec, res);
 }
 
 /*
@@ -2536,6 +2723,7 @@ static struct hda_verb alc880_pin_asus_init_verbs[] = {
 /* Enable GPIO mask and set output */
 #define alc880_gpio1_init_verbs	alc_gpio1_init_verbs
 #define alc880_gpio2_init_verbs	alc_gpio2_init_verbs
+#define alc880_gpio3_init_verbs	alc_gpio3_init_verbs
 
 /* Clevo m520g init */
 static struct hda_verb alc880_pin_clevo_init_verbs[] = {
@@ -2698,30 +2886,18 @@ static struct hda_verb alc880_lg_init_verbs[] = {
 	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{ }
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_automute(struct hda_codec *codec)
+static void alc880_lg_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	if ((res >> 28) == 0x01)
-		alc880_lg_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -2795,30 +2971,18 @@ static struct hda_verb alc880_lg_lw_init_verbs[] = {
 	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{ }
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_lw_automute(struct hda_codec *codec)
+static void alc880_lg_lw_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
-static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	if ((res >> 28) == 0x01)
-		alc880_lg_lw_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 static struct snd_kcontrol_new alc880_medion_rim_mixer[] = {
@@ -2865,16 +3029,10 @@ static struct hda_verb alc880_medion_rim_init_verbs[] = {
 /* toggle speaker-output according to the hp-jack state */
 static void alc880_medion_rim_automute(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	if (present)
+	struct alc_spec *spec = codec->spec;
+	alc_automute_amp(codec);
+	/* toggle EAPD */
+	if (spec->jack_present)
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0);
 	else
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 2);
@@ -2890,6 +3048,15 @@ static void alc880_medion_rim_unsol_event(struct hda_codec *codec,
 		alc880_medion_rim_automute(codec);
 }
 
+static void alc880_medion_rim_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc880_medion_rim_automute(codec);
+}
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 static struct hda_amp_list alc880_loopbacks[] = {
 	{ 0x0b, HDA_INPUT, 0 },
@@ -2918,8 +3085,7 @@ static int alc_init(struct hda_codec *codec)
 	unsigned int i;
 
 	alc_fix_pll(codec);
-	if (codec->vendor_id == 0x10ec0888)
-		alc888_coef_init(codec);
+	alc_auto_init_amp(codec, spec->init_amp);
 
 	for (i = 0; i < spec->num_init_verbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
@@ -3121,7 +3287,10 @@ static int alc_build_pcms(struct hda_codec *codec)
 	if (spec->no_analog)
 		goto skip_analog;
 
+	snprintf(spec->stream_name_analog, sizeof(spec->stream_name_analog),
+		 "%s Analog", codec->chip_name);
 	info->name = spec->stream_name_analog;
+	
 	if (spec->stream_analog_playback) {
 		if (snd_BUG_ON(!spec->multiout.dac_nids))
 			return -EINVAL;
@@ -3147,6 +3316,9 @@ static int alc_build_pcms(struct hda_codec *codec)
  skip_analog:
 	/* SPDIF for stream index #1 */
 	if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
+		snprintf(spec->stream_name_digital,
+			 sizeof(spec->stream_name_digital),
+			 "%s Digital", codec->chip_name);
 		codec->num_pcms = 2;
 	        codec->slave_dig_outs = spec->multiout.slave_dig_outs;
 		info = spec->pcm_rec + 1;
@@ -3749,7 +3921,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_f1734_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_ASUS] = {
 		.mixers = { alc880_asus_mixer },
@@ -3826,7 +3998,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.need_dac_fix = 1,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_unsol_event,
-		.init_hook = alc880_uniwill_automute,
+		.init_hook = alc880_uniwill_init_hook,
 	},
 	[ALC880_UNIWILL_P53] = {
 		.mixers = { alc880_uniwill_p53_mixer },
@@ -3838,7 +4010,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_threestack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_FUJITSU] = {
 		.mixers = { alc880_fujitsu_mixer },
@@ -3852,7 +4024,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.init_hook = alc880_uniwill_p53_hp_automute,
+		.init_hook = alc880_uniwill_p53_init_hook,
 	},
 	[ALC880_CLEVO] = {
 		.mixers = { alc880_three_stack_mixer },
@@ -3877,8 +4049,8 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_lg_ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc880_lg_capture_source,
-		.unsol_event = alc880_lg_unsol_event,
-		.init_hook = alc880_lg_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc880_lg_init_hook,
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 		.loopbacks = alc880_lg_loopbacks,
 #endif
@@ -3893,8 +4065,8 @@ static struct alc_config_preset alc880_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc880_lg_lw_modes),
 		.channel_mode = alc880_lg_lw_modes,
 		.input_mux = &alc880_lg_lw_capture_source,
-		.unsol_event = alc880_lg_lw_unsol_event,
-		.init_hook = alc880_lg_lw_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc880_lg_lw_init_hook,
 	},
 	[ALC880_MEDION_RIM] = {
 		.mixers = { alc880_medion_rim_mixer },
@@ -3908,7 +4080,7 @@ static struct alc_config_preset alc880_presets[] = {
 		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_medion_rim_capture_source,
 		.unsol_event = alc880_medion_rim_unsol_event,
-		.init_hook = alc880_medion_rim_automute,
+		.init_hook = alc880_medion_rim_init_hook,
 	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC880_TEST] = {
@@ -4193,7 +4365,6 @@ static void alc880_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i < spec->autocfg.line_outs; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -4298,6 +4469,8 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -4355,8 +4528,8 @@ static int patch_alc880(struct hda_codec *codec)
 						  alc880_models,
 						  alc880_cfg_tbl);
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC880, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC880_AUTO;
 	}
 
@@ -4383,12 +4556,10 @@ static int patch_alc880(struct hda_codec *codec)
 	if (board_config != ALC880_AUTO)
 		setup_preset(spec, &alc880_presets[board_config]);
 
-	spec->stream_name_analog = "ALC880 Analog";
 	spec->stream_analog_playback = &alc880_pcm_analog_playback;
 	spec->stream_analog_capture = &alc880_pcm_analog_capture;
 	spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
 
-	spec->stream_name_digital = "ALC880 Digital";
 	spec->stream_digital_playback = &alc880_pcm_digital_playback;
 	spec->stream_digital_capture = &alc880_pcm_digital_capture;
 
@@ -5673,7 +5844,6 @@ static void alc260_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	hda_nid_t nid;
 
-	alc_subsystem_id(codec, 0x10, 0x15, 0x0f);
 	nid = spec->autocfg.line_out_pins[0];
 	if (nid) {
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -5783,6 +5953,8 @@ static int alc260_parse_auto_config(struct hda_codec *codec)
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
 
+	alc_ssid_check(codec, 0x10, 0x15, 0x0f);
+
 	return 1;
 }
 
@@ -6000,8 +6172,9 @@ static int patch_alc260(struct hda_codec *codec)
 						  alc260_models,
 						  alc260_cfg_tbl);
 	if (board_config < 0) {
-		snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260, "
-			   "trying auto-probe from BIOS...\n");
+		snd_printd(KERN_INFO "hda_codec: Unknown model for %s, "
+			   "trying auto-probe from BIOS...\n",
+			   codec->chip_name);
 		board_config = ALC260_AUTO;
 	}
 
@@ -6028,11 +6201,9 @@ static int patch_alc260(struct hda_codec *codec)
 	if (board_config != ALC260_AUTO)
 		setup_preset(spec, &alc260_presets[board_config]);
 
-	spec->stream_name_analog = "ALC260 Analog";
 	spec->stream_analog_playback = &alc260_pcm_analog_playback;
 	spec->stream_analog_capture = &alc260_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC260 Digital";
 	spec->stream_digital_playback = &alc260_pcm_digital_playback;
 	spec->stream_digital_capture = &alc260_pcm_digital_capture;
 
@@ -6109,6 +6280,16 @@ static struct hda_input_mux alc882_capture_source = {
 		{ "CD", 0x4 },
 	},
 };
+
+static struct hda_input_mux mb5_capture_source = {
+	.num_items = 3,
+	.items = {
+		{ "Mic", 0x1 },
+		{ "Line", 0x2 },
+		{ "CD", 0x4 },
+	},
+};
+
 /*
  * 2ch mode
  */
@@ -6196,6 +6377,34 @@ static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
 	{ 6, alc885_mbp_ch6_init },
 };
 
+/*
+ * 2ch
+ * Speakers/Woofer/HP = Front
+ * LineIn = Input
+ */
+static struct hda_verb alc885_mb5_ch2_init[] = {
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{ } /* end */
+};
+
+/*
+ * 6ch mode
+ * Speakers/HP = Front
+ * Woofer = LFE
+ * LineIn = Surround
+ */
+static struct hda_verb alc885_mb5_ch6_init[] = {
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc885_mb5_6ch_modes[2] = {
+	{ 2, alc885_mb5_ch2_init },
+	{ 6, alc885_mb5_ch6_init },
+};
 
 /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
  *                 Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
@@ -6238,6 +6447,25 @@ static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
 	{ } /* end */
 };
+
+static struct snd_kcontrol_new alc885_mb5_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x19, 0x00, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct snd_kcontrol_new alc882_w2jc_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -6465,6 +6693,55 @@ static struct hda_verb alc882_macpro_init_verbs[] = {
 	{ }
 };
 
+/* Macbook 5,1 */
+static struct hda_verb alc885_mb5_init_verbs[] = {
+	/* DACs */
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Front mixer */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* Surround mixer */
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* LFE mixer */
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* HP mixer */
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* Front Pin (0x0c) */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* LFE Pin (0x0e) */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},
+	/* HP Pin (0x0f) */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+	/* Front Mic pin: input vref at 80% */
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Line In pin */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{ }
+};
+
 /* Macbook Pro rev3 */
 static struct hda_verb alc885_mbp3_init_verbs[] = {
 	/* Front mixer: unmute input/output amp left and right (volume = 0) */
@@ -6554,45 +6831,23 @@ static struct hda_verb alc885_imac24_init_verbs[] = {
 };
 
 /* Toggle speaker-output according to the hp-jack state */
-static void alc885_imac24_automute(struct hda_codec *codec)
+static void alc885_imac24_automute_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-/* Processes unsolicited events. */
-static void alc885_imac24_unsol_event(struct hda_codec *codec,
-				      unsigned int res)
-{
-	/* Headphone insertion or removal. */
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc885_imac24_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x18;
+	spec->autocfg.speaker_pins[1] = 0x1a;
+	alc_automute_amp(codec);
 }
 
-static void alc885_mbp3_automute(struct hda_codec *codec)
+static void alc885_mbp3_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? 0 : HDA_AMP_MUTE);
+	struct alc_spec *spec = codec->spec;
 
-}
-static void alc885_mbp3_unsol_event(struct hda_codec *codec,
-				    unsigned int res)
-{
-	/* Headphone insertion or removal. */
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc885_mbp3_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 
@@ -6617,24 +6872,25 @@ static struct hda_verb alc882_targa_verbs[] = {
 /* toggle speaker-output according to the hp-jack state */
 static void alc882_targa_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	struct alc_spec *spec = codec->spec;
+	alc_automute_amp(codec);
 	snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
-				  present ? 1 : 3);
+				  spec->jack_present ? 1 : 3);
+}
+
+static void alc882_targa_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc882_targa_automute(codec);
 }
 
 static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 26 bit!
-	 */
-	if (((res >> 26) == ALC880_HP_EVENT)) {
+	if ((res >> 26) == ALC880_HP_EVENT)
 		alc882_targa_automute(codec);
-	}
 }
 
 static struct hda_verb alc882_asus_a7j_verbs[] = {
@@ -6716,7 +6972,7 @@ static void alc885_macpro_init_hook(struct hda_codec *codec)
 static void alc885_imac24_init_hook(struct hda_codec *codec)
 {
 	alc885_macpro_init_hook(codec);
-	alc885_imac24_automute(codec);
+	alc885_imac24_automute_init_hook(codec);
 }
 
 /*
@@ -6809,6 +7065,7 @@ static const char *alc882_models[ALC882_MODEL_LAST] = {
 	[ALC882_ASUS_A7J]	= "asus-a7j",
 	[ALC882_ASUS_A7M]	= "asus-a7m",
 	[ALC885_MACPRO]		= "macpro",
+	[ALC885_MB5]		= "mb5",
 	[ALC885_MBP3]		= "mbp3",
 	[ALC885_IMAC24]		= "imac24",
 	[ALC882_AUTO]		= "auto",
@@ -6886,8 +7143,20 @@ static struct alc_config_preset alc882_presets[] = {
 		.input_mux = &alc882_capture_source,
 		.dig_out_nid = ALC882_DIGOUT_NID,
 		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc885_mbp3_unsol_event,
-		.init_hook = alc885_mbp3_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc885_mbp3_init_hook,
+	},
+	[ALC885_MB5] = {
+		.mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
+		.init_verbs = { alc885_mb5_init_verbs,
+				alc880_gpio1_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
+		.dac_nids = alc882_dac_nids,
+		.channel_mode = alc885_mb5_6ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
+		.input_mux = &mb5_capture_source,
+		.dig_out_nid = ALC882_DIGOUT_NID,
+		.dig_in_nid = ALC882_DIGIN_NID,
 	},
 	[ALC885_MACPRO] = {
 		.mixers = { alc882_macpro_mixer },
@@ -6911,7 +7180,7 @@ static struct alc_config_preset alc882_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
 		.channel_mode = alc882_ch_modes,
 		.input_mux = &alc882_capture_source,
-		.unsol_event = alc885_imac24_unsol_event,
+		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc885_imac24_init_hook,
 	},
 	[ALC882_TARGA] = {
@@ -6928,7 +7197,7 @@ static struct alc_config_preset alc882_presets[] = {
 		.need_dac_fix = 1,
 		.input_mux = &alc882_capture_source,
 		.unsol_event = alc882_targa_unsol_event,
-		.init_hook = alc882_targa_automute,
+		.init_hook = alc882_targa_init_hook,
 	},
 	[ALC882_ASUS_A7J] = {
 		.mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
@@ -7008,7 +7277,6 @@ static void alc882_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -7191,10 +7459,17 @@ static int patch_alc882(struct hda_codec *codec)
 		case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
 		case 0x106b00a4: /* MacbookPro4,1 */
 		case 0x106b2c00: /* Macbook Pro rev3 */
-		case 0x106b3600: /* Macbook 3.1 */
+		/* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
 		case 0x106b3800: /* MacbookPro4,1 - latter revision */
 			board_config = ALC885_MBP3;
 			break;
+		case 0x106b3f00: /* Macbook 5,1 */
+		case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense
+				  *   seems not working, so apparently
+				  *   no perfect solution yet
+				  */
+			board_config = ALC885_MB5;
+			break;
 		default:
 			/* ALC889A is handled better as ALC888-compatible */
 			if (codec->revision_id == 0x100101 ||
@@ -7202,8 +7477,9 @@ static int patch_alc882(struct hda_codec *codec)
 				alc_free(codec);
 				return patch_alc883(codec);
 			}
-			printk(KERN_INFO "hda_codec: Unknown model for ALC882, "
-		       			 "trying auto-probe from BIOS...\n");
+			printk(KERN_INFO "hda_codec: Unknown model for %s, "
+			       "trying auto-probe from BIOS...\n",
+			       codec->chip_name);
 			board_config = ALC882_AUTO;
 		}
 	}
@@ -7233,14 +7509,6 @@ static int patch_alc882(struct hda_codec *codec)
 	if (board_config != ALC882_AUTO)
 		setup_preset(spec, &alc882_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0885) {
-		spec->stream_name_analog = "ALC885 Analog";
-		spec->stream_name_digital = "ALC885 Digital";
-	} else {
-		spec->stream_name_analog = "ALC882 Analog";
-		spec->stream_name_digital = "ALC882 Digital";
-	}
-
 	spec->stream_analog_playback = &alc882_pcm_analog_playback;
 	spec->stream_analog_capture = &alc882_pcm_analog_capture;
 	/* FIXME: setup DAC5 */
@@ -7393,6 +7661,17 @@ static struct hda_input_mux alc883_asus_eee1601_capture_source = {
 	},
 };
 
+static struct hda_input_mux alc889A_mb31_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "Mic", 0x0 },
+		/* Front Mic (0x01) unused */
+		{ "Line", 0x2 },
+		/* Line 2 (0x03) unused */
+		/* CD (0x04) unsused? */
+	},
+};
+
 /*
  * 2ch mode
  */
@@ -7442,6 +7721,73 @@ static struct hda_channel_mode alc883_3ST_6ch_modes[3] = {
 	{ 6, alc883_3ST_ch6_init },
 };
 
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_4ST_ch2_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_4ST_ch4_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_4ST_ch6_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_4ST_ch8_init[] = {
+	{ 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
+	{ 2, alc883_4ST_ch2_init },
+	{ 4, alc883_4ST_ch4_init },
+	{ 6, alc883_4ST_ch6_init },
+	{ 8, alc883_4ST_ch8_init },
+};
+
+
 /*
  * 2ch mode
  */
@@ -7511,6 +7857,49 @@ static struct hda_channel_mode alc883_sixstack_modes[2] = {
 	{ 8, alc883_sixstack_ch8_init },
 };
 
+/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch2_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
+	{ } /* end */
+};
+
+/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch4_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
+	{ } /* end */
+};
+
+/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */
+static struct hda_verb alc889A_mb31_ch5_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as rear */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
+	{ } /* end */
+};
+
+/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */
+static struct hda_verb alc889A_mb31_ch6_init[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as front */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Subwoofer off */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
+	{ } /* end */
+};
+
+static struct hda_channel_mode alc889A_mb31_6ch_modes[4] = {
+	{ 2, alc889A_mb31_ch2_init },
+	{ 4, alc889A_mb31_ch4_init },
+	{ 5, alc889A_mb31_ch5_init },
+	{ 6, alc889A_mb31_ch6_init },
+};
+
 static struct hda_verb alc883_medion_eapd_verbs[] = {
         /* eanable EAPD on medion laptop */
 	{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
@@ -7776,8 +8165,6 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = {
 	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x1a, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
@@ -7791,6 +8178,42 @@ static struct snd_kcontrol_new alc888_lenovo_sky_mixer[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc889A_mb31_mixer[] = {
+	/* Output mixers */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00,
+		HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT),
+	/* Output switches */
+	HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT),
+	HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT),
+	/* Boost mixers */
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Boost", 0x1a, 0x00, HDA_INPUT),
+	/* Input mixers */
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc883_vaiott_mixer[] = {
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct hda_bind_ctls alc883_bind_cap_vol = {
 	.ops = &snd_hda_bind_vol,
 	.values = {
@@ -7926,16 +8349,14 @@ static struct hda_verb alc883_init_verbs[] = {
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_mitac_hp_automute(struct hda_codec *codec)
+static void alc883_mitac_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /* auto-toggle front mic */
@@ -7952,25 +8373,6 @@ static void alc883_mitac_mic_automute(struct hda_codec *codec)
 }
 */
 
-static void alc883_mitac_automute(struct hda_codec *codec)
-{
-	alc883_mitac_hp_automute(codec);
-	/* alc883_mitac_mic_automute(codec); */
-}
-
-static void alc883_mitac_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_mitac_hp_automute(codec);
-		break;
-	case ALC880_MIC_EVENT:
-		/* alc883_mitac_mic_automute(codec); */
-		break;
-	}
-}
-
 static struct hda_verb alc883_mitac_verbs[] = {
 	/* HP */
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -8022,14 +8424,24 @@ static struct hda_verb alc883_tagra_verbs[] = {
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/surround */
-	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
+/* Connect Line-Out side jack (SPDIF) to Side */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+/* Connect Mic jack to CLFE */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect Line-in jack to Surround */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect HP out jack to Front */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
 
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x03},
 
 	{ } /* end */
 };
@@ -8088,29 +8500,26 @@ static struct hda_verb alc888_6st_dell_verbs[] = {
 	{ }
 };
 
-static void alc888_3st_hp_front_automute(struct hda_codec *codec)
-{
-	unsigned int present, bits;
+static struct hda_verb alc883_vaiott_verbs[] = {
+	/* HP */
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	/* enable unsolicited event */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+
+	{ } /* end */
+};
 
-static void alc888_3st_hp_unsol_event(struct hda_codec *codec,
-				      unsigned int res)
+static void alc888_3st_hp_init_hook(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc888_3st_hp_front_automute(codec);
-		break;
-	}
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x18;
+	alc_automute_amp(codec);
 }
 
 static struct hda_verb alc888_3st_hp_verbs[] = {
@@ -8207,56 +8616,18 @@ static struct hda_verb alc883_medion_md2_verbs[] = {
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_medion_md2_automute(struct hda_codec *codec)
+static void alc883_medion_md2_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc883_medion_md2_unsol_event(struct hda_codec *codec,
-					  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_medion_md2_automute(codec);
-}
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc883_tagra_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-	snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
-				  present ? 1 : 3);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_tagra_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_tagra_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_clevo_m720_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+#define alc883_tagra_init_hook		alc882_targa_init_hook
+#define alc883_tagra_unsol_event	alc882_targa_unsol_event
 
 static void alc883_clevo_m720_mic_automute(struct hda_codec *codec)
 {
@@ -8268,9 +8639,13 @@ static void alc883_clevo_m720_mic_automute(struct hda_codec *codec)
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
 
-static void alc883_clevo_m720_automute(struct hda_codec *codec)
+static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
 {
-	alc883_clevo_m720_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 	alc883_clevo_m720_mic_automute(codec);
 }
 
@@ -8278,52 +8653,32 @@ static void alc883_clevo_m720_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_clevo_m720_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc883_clevo_m720_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_2ch_fujitsu_pi2515_automute(struct hda_codec *codec)
+static void alc883_2ch_fujitsu_pi2515_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_2ch_fujitsu_pi2515_unsol_event(struct hda_codec *codec,
-						  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_2ch_fujitsu_pi2515_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
-static void alc883_haier_w66_automute(struct hda_codec *codec)
+static void alc883_haier_w66_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? 0x80 : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 0x80, bits);
-}
-
-static void alc883_haier_w66_unsol_event(struct hda_codec *codec,
-					 unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_haier_w66_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
@@ -8331,8 +8686,8 @@ static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
  	unsigned int present;
 	unsigned char bits;
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
@@ -8362,23 +8717,14 @@ static void alc883_lenovo_101e_unsol_event(struct hda_codec *codec,
 }
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc883_acer_aspire_automute(struct hda_codec *codec)
+static void alc883_acer_aspire_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc883_acer_aspire_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc883_acer_aspire_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	alc_automute_amp(codec);
 }
 
 static struct hda_verb alc883_acer_eapd_verbs[] = {
@@ -8399,75 +8745,39 @@ static struct hda_verb alc883_acer_eapd_verbs[] = {
 	{ }
 };
 
-static void alc888_6st_dell_front_automute(struct hda_codec *codec)
+static void alc888_6st_dell_init_hook(struct hda_codec *codec)
 {
- 	unsigned int present;
-
- 	present = snd_hda_codec_read(codec, 0x1b, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-				HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc888_6st_dell_unsol_event(struct hda_codec *codec,
-					     unsigned int res)
-{
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		/* printk(KERN_DEBUG "hp_event\n"); */
-		alc888_6st_dell_front_automute(codec);
-		break;
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	spec->autocfg.speaker_pins[3] = 0x17;
+	alc_automute_amp(codec);
 }
 
-static void alc888_lenovo_sky_front_automute(struct hda_codec *codec)
+static void alc888_lenovo_sky_init_hook(struct hda_codec *codec)
 {
-	unsigned int mute;
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-		snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-		snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	spec->autocfg.speaker_pins[3] = 0x17;
+	spec->autocfg.speaker_pins[4] = 0x1a;
+	alc_automute_amp(codec);
 }
 
-static void alc883_lenovo_sky_unsol_event(struct hda_codec *codec,
-					     unsigned int res)
+static void alc883_vaiott_init_hook(struct hda_codec *codec)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc888_lenovo_sky_front_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x17;
+	alc_automute_amp(codec);
 }
 
 /*
@@ -8555,39 +8865,33 @@ static void alc883_nb_mic_automute(struct hda_codec *codec)
 			    0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
 }
 
-static void alc883_M90V_speaker_automute(struct hda_codec *codec)
+static void alc883_M90V_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
-	snd_hda_codec_write(codec, 0x15, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
-	snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x15;
+	spec->autocfg.speaker_pins[2] = 0x16;
+	alc_automute_pin(codec);
 }
 
 static void alc883_mode2_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_M90V_speaker_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc883_nb_mic_automute(codec);
 		break;
+	default:
+		alc_sku_unsol_event(codec, res);
+		break;
 	}
 }
 
 static void alc883_mode2_inithook(struct hda_codec *codec)
 {
-	alc883_M90V_speaker_automute(codec);
+	alc883_M90V_init_hook(codec);
 	alc883_nb_mic_automute(codec);
 }
 
@@ -8604,32 +8908,49 @@ static struct hda_verb alc888_asus_eee1601_verbs[] = {
 	{ } /* end */
 };
 
-static void alc883_eee1601_speaker_automute(struct hda_codec *codec)
+static void alc883_eee1601_inithook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	struct alc_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    bits);
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc_automute_pin(codec);
 }
 
-static void alc883_eee1601_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
+static struct hda_verb alc889A_mb31_verbs[] = {
+	/* Init rear pin (used as headphone output) */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},    /* Apple Headphones */
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},           /* Connect to front */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+	/* Init line pin (used as output in 4ch and 6ch mode) */
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},           /* Connect to CLFE */
+	/* Init line 2 pin (used as headphone out by default) */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},  /* Use as input */
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */
+	{ } /* end */
+};
+
+/* Mute speakers according to the headphone jack state */
+static void alc889A_mb31_automute(struct hda_codec *codec)
 {
-	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc883_eee1601_speaker_automute(codec);
-		break;
+	unsigned int present;
+
+	/* Mute only in 2ch or 4ch mode */
+	if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0)
+	    == 0x00) {
+		present = snd_hda_codec_read(codec, 0x15, 0,
+			AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE;
+		snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	}
 }
 
-static void alc883_eee1601_inithook(struct hda_codec *codec)
+static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
 {
-	alc883_eee1601_speaker_automute(codec);
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc889A_mb31_automute(codec);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -8653,9 +8974,11 @@ static const char *alc883_models[ALC883_MODEL_LAST] = {
 	[ALC883_6ST_DIG]	= "6stack-dig",
 	[ALC883_TARGA_DIG]	= "targa-dig",
 	[ALC883_TARGA_2ch_DIG]	= "targa-2ch-dig",
+	[ALC883_TARGA_8ch_DIG]	= "targa-8ch-dig",
 	[ALC883_ACER]		= "acer",
 	[ALC883_ACER_ASPIRE]	= "acer-aspire",
 	[ALC888_ACER_ASPIRE_4930G]	= "acer-aspire-4930g",
+	[ALC888_ACER_ASPIRE_8930G]	= "acer-aspire-8930g",
 	[ALC883_MEDION]		= "medion",
 	[ALC883_MEDION_MD2]	= "medion-md2",
 	[ALC883_LAPTOP_EAPD]	= "laptop-eapd",
@@ -8672,6 +8995,8 @@ static const char *alc883_models[ALC883_MODEL_LAST] = {
 	[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
 	[ALC883_3ST_6ch_INTEL]	= "3stack-6ch-intel",
 	[ALC1200_ASUS_P5Q]	= "asus-p5q",
+	[ALC889A_MB31]		= "mb31",
+	[ALC883_SONY_VAIO_TT]	= "sony-vaio-tt",
 	[ALC883_AUTO]		= "auto",
 };
 
@@ -8687,14 +9012,18 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G",
 		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x0145, "Acer Aspire 8930G",
+		ALC888_ACER_ASPIRE_8930G),
 	SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
 		ALC888_ACER_ASPIRE_4930G),
-	/* default Acer */
-	SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER),
+	/* default Acer -- disabled as it causes more problems.
+	 *    model=auto should work fine now
+	 */
+	/* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
@@ -8730,6 +9059,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
+	SND_PCI_QUIRK(0x1462, 0x6510, "MSI GX620", ALC883_TARGA_8ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7250, "MSI", ALC883_6ST_DIG),
@@ -8762,6 +9092,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
 	SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
+	SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
 	{}
 };
 
@@ -8842,7 +9173,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_automute,
+		.init_hook = alc883_tagra_init_hook,
 	},
 	[ALC883_TARGA_2ch_DIG] = {
 		.mixers = { alc883_tagra_2ch_mixer},
@@ -8856,7 +9187,25 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_tagra_unsol_event,
-		.init_hook = alc883_tagra_automute,
+		.init_hook = alc883_tagra_init_hook,
+	},
+	[ALC883_TARGA_8ch_DIG] = {
+		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+				alc883_tagra_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+		.adc_nids = alc883_adc_nids_rev,
+		.capsrc_nids = alc883_capsrc_nids_rev,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.dig_in_nid = ALC883_DIGIN_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_4ST_8ch_modes),
+		.channel_mode = alc883_4ST_8ch_modes,
+		.need_dac_fix = 1,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc883_tagra_unsol_event,
+		.init_hook = alc883_tagra_init_hook,
 	},
 	[ALC883_ACER] = {
 		.mixers = { alc883_base_mixer },
@@ -8881,8 +9230,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_acer_aspire_unsol_event,
-		.init_hook = alc883_acer_aspire_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_acer_aspire_init_hook,
 	},
 	[ALC888_ACER_ASPIRE_4930G] = {
 		.mixers = { alc888_base_mixer,
@@ -8901,8 +9250,29 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
-		.unsol_event = alc888_acer_aspire_4930g_unsol_event,
-		.init_hook = alc888_acer_aspire_4930g_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_acer_aspire_4930g_init_hook,
+	},
+	[ALC888_ACER_ASPIRE_8930G] = {
+		.mixers = { alc888_base_mixer,
+				alc883_chmode_mixer },
+		.init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+				alc889_acer_aspire_8930g_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+		.adc_nids = alc889_adc_nids,
+		.capsrc_nids = alc889_capsrc_nids,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+		.channel_mode = alc883_3ST_6ch_modes,
+		.need_dac_fix = 1,
+		.const_channel_count = 6,
+		.num_mux_defs =
+			ARRAY_SIZE(alc889_capture_sources),
+		.input_mux = alc889_capture_sources,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc889_acer_aspire_8930g_init_hook,
 	},
 	[ALC883_MEDION] = {
 		.mixers = { alc883_fivestack_mixer,
@@ -8926,8 +9296,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_medion_md2_unsol_event,
-		.init_hook = alc883_medion_md2_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_medion_md2_init_hook,
 	},
 	[ALC883_LAPTOP_EAPD] = {
 		.mixers = { alc883_base_mixer },
@@ -8948,7 +9318,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc883_clevo_m720_unsol_event,
-		.init_hook = alc883_clevo_m720_automute,
+		.init_hook = alc883_clevo_m720_init_hook,
 	},
 	[ALC883_LENOVO_101E_2ch] = {
 		.mixers = { alc883_lenovo_101e_2ch_mixer},
@@ -8972,8 +9342,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_lenovo_nb0763_capture_source,
-		.unsol_event = alc883_medion_md2_unsol_event,
-		.init_hook = alc883_medion_md2_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_medion_md2_init_hook,
 	},
 	[ALC888_LENOVO_MS7195_DIG] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -8997,8 +9367,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_haier_w66_unsol_event,
-		.init_hook = alc883_haier_w66_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_haier_w66_init_hook,
 	},
 	[ALC888_3ST_HP] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9009,8 +9379,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc888_3st_hp_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc888_3st_hp_unsol_event,
-		.init_hook = alc888_3st_hp_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_3st_hp_init_hook,
 	},
 	[ALC888_6ST_DELL] = {
 		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
@@ -9022,8 +9392,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc888_6st_dell_unsol_event,
-		.init_hook = alc888_6st_dell_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_6st_dell_init_hook,
 	},
 	[ALC883_MITAC] = {
 		.mixers = { alc883_mitac_mixer },
@@ -9033,8 +9403,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_capture_source,
-		.unsol_event = alc883_mitac_unsol_event,
-		.init_hook = alc883_mitac_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_mitac_init_hook,
 	},
 	[ALC883_FUJITSU_PI2515] = {
 		.mixers = { alc883_2ch_fujitsu_pi2515_mixer },
@@ -9046,8 +9416,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
 		.channel_mode = alc883_3ST_2ch_modes,
 		.input_mux = &alc883_fujitsu_pi2515_capture_source,
-		.unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event,
-		.init_hook = alc883_2ch_fujitsu_pi2515_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_2ch_fujitsu_pi2515_init_hook,
 	},
 	[ALC888_FUJITSU_XA3530] = {
 		.mixers = { alc888_base_mixer, alc883_chmode_mixer },
@@ -9064,8 +9434,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
-		.unsol_event = alc888_fujitsu_xa3530_unsol_event,
-		.init_hook = alc888_fujitsu_xa3530_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_fujitsu_xa3530_init_hook,
 	},
 	[ALC888_LENOVO_SKY] = {
 		.mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer },
@@ -9077,8 +9447,8 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_sixstack_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_lenovo_sky_capture_source,
-		.unsol_event = alc883_lenovo_sky_unsol_event,
-		.init_hook = alc888_lenovo_sky_front_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc888_lenovo_sky_init_hook,
 	},
 	[ALC888_ASUS_M90V] = {
 		.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9106,7 +9476,7 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_3ST_2ch_modes,
 		.need_dac_fix = 1,
 		.input_mux = &alc883_asus_eee1601_capture_source,
-		.unsol_event = alc883_eee1601_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.init_hook = alc883_eee1601_inithook,
 	},
 	[ALC1200_ASUS_P5Q] = {
@@ -9121,6 +9491,32 @@ static struct alc_config_preset alc883_presets[] = {
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
 	},
+	[ALC889A_MB31] = {
+		.mixers = { alc889A_mb31_mixer, alc883_chmode_mixer},
+		.init_verbs = { alc883_init_verbs, alc889A_mb31_verbs,
+			alc880_gpio1_init_verbs },
+		.adc_nids = alc883_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.channel_mode = alc889A_mb31_6ch_modes,
+		.num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes),
+		.input_mux = &alc889A_mb31_capture_source,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.unsol_event = alc889A_mb31_unsol_event,
+		.init_hook = alc889A_mb31_automute,
+	},
+	[ALC883_SONY_VAIO_TT] = {
+		.mixers = { alc883_vaiott_mixer },
+		.init_verbs = { alc883_init_verbs, alc883_vaiott_verbs },
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+		.channel_mode = alc883_3ST_2ch_modes,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc883_vaiott_init_hook,
+	},
 };
 
 
@@ -9149,7 +9545,6 @@ static void alc883_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -9267,10 +9662,18 @@ static int patch_alc883(struct hda_codec *codec)
 	board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
 						  alc883_models,
 						  alc883_cfg_tbl);
-	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC883, "
-		       "trying auto-probe from BIOS...\n");
-		board_config = ALC883_AUTO;
+	if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
+		/* Pick up systems that don't supply PCI SSID */
+		switch (codec->subsystem_id) {
+		case 0x106b3600: /* Macbook 3.1 */
+			board_config = ALC889A_MB31;
+			break;
+		default:
+			printk(KERN_INFO
+				"hda_codec: Unknown model for %s, trying "
+				"auto-probe from BIOS...\n", codec->chip_name);
+			board_config = ALC883_AUTO;
+		}
 	}
 
 	if (board_config == ALC883_AUTO) {
@@ -9298,13 +9701,6 @@ static int patch_alc883(struct hda_codec *codec)
 
 	switch (codec->vendor_id) {
 	case 0x10ec0888:
-		if (codec->revision_id == 0x100101) {
-			spec->stream_name_analog = "ALC1200 Analog";
-			spec->stream_name_digital = "ALC1200 Digital";
-		} else {
-			spec->stream_name_analog = "ALC888 Analog";
-			spec->stream_name_digital = "ALC888 Digital";
-		}
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
 			spec->adc_nids = alc883_adc_nids;
@@ -9312,10 +9708,9 @@ static int patch_alc883(struct hda_codec *codec)
 		if (!spec->capsrc_nids)
 			spec->capsrc_nids = alc883_capsrc_nids;
 		spec->capture_style = CAPT_MIX; /* matrix-style capture */
+		spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
 		break;
 	case 0x10ec0889:
-		spec->stream_name_analog = "ALC889 Analog";
-		spec->stream_name_digital = "ALC889 Digital";
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids);
 			spec->adc_nids = alc889_adc_nids;
@@ -9326,8 +9721,6 @@ static int patch_alc883(struct hda_codec *codec)
 							capture */
 		break;
 	default:
-		spec->stream_name_analog = "ALC883 Analog";
-		spec->stream_name_digital = "ALC883 Digital";
 		if (!spec->num_adc_nids) {
 			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
 			spec->adc_nids = alc883_adc_nids;
@@ -9407,24 +9800,6 @@ static struct snd_kcontrol_new alc262_base_mixer[] = {
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
-	/*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	{ } /* end */
-};
-
 /* update HP, line and mono-out pins according to the master switch */
 static void alc262_hp_master_update(struct hda_codec *codec)
 {
@@ -9480,14 +9855,7 @@ static void alc262_hp_wildwest_unsol_event(struct hda_codec *codec,
 	alc262_hp_wildwest_automute(codec);
 }
 
-static int alc262_hp_master_sw_get(struct snd_kcontrol *kcontrol,
-				   struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct alc_spec *spec = codec->spec;
-	*ucontrol->value.integer.value = spec->master_sw;
-	return 0;
-}
+#define alc262_hp_master_sw_get		alc260_hp_master_sw_get
 
 static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol,
 				   struct snd_ctl_elem_value *ucontrol)
@@ -9503,14 +9871,17 @@ static int alc262_hp_master_sw_put(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
+#define ALC262_HP_MASTER_SWITCH					\
+	{							\
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+		.name = "Master Playback Switch",		\
+		.info = snd_ctl_boolean_mono_info,		\
+		.get = alc262_hp_master_sw_get,			\
+		.put = alc262_hp_master_sw_put,			\
+	}
+
 static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_ctl_boolean_mono_info,
-		.get = alc262_hp_master_sw_get,
-		.put = alc262_hp_master_sw_put,
-	},
+	ALC262_HP_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
@@ -9534,13 +9905,7 @@ static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc262_HP_BPC_WildWest_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_ctl_boolean_mono_info,
-		.get = alc262_hp_master_sw_get,
-		.put = alc262_hp_master_sw_put,
-	},
+	ALC262_HP_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
@@ -9567,32 +9932,13 @@ static struct snd_kcontrol_new alc262_HP_BPC_WildWest_option_mixer[] = {
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hp_t5735_automute(struct hda_codec *codec, int force)
+static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 
-	if (force || !spec->sense_updated) {
-		unsigned int present;
-		present = snd_hda_codec_read(codec, 0x15, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
-		spec->sense_updated = 1;
-	}
-	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_OUTPUT, 0, HDA_AMP_MUTE,
-				 spec->jack_present ? HDA_AMP_MUTE : 0);
-}
-
-static void alc262_hp_t5735_unsol_event(struct hda_codec *codec,
-					unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hp_t5735_automute(codec, 1);
-}
-
-static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
-{
-	alc262_hp_t5735_automute(codec, 1);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
+	alc_automute_amp(codec);
 }
 
 static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
@@ -9645,46 +9991,132 @@ static struct hda_input_mux alc262_hp_rp5700_capture_source = {
 	},
 };
 
-/* bind hp and internal speaker mute (with plug check) */
-static int alc262_sony_master_sw_put(struct snd_kcontrol *kcontrol,
-				     struct snd_ctl_elem_value *ucontrol)
+/* bind hp and internal speaker mute (with plug check) as master switch */
+static void alc262_hippo_master_update(struct hda_codec *codec)
 {
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	long *valp = ucontrol->value.integer.value;
-	int change;
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+	hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
+	hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0];
+	unsigned int mute;
 
-	/* change hp mute */
-	change = snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
-	if (change) {
-		/* change speaker according to HP jack state */
-		struct alc_spec *spec = codec->spec;
-		unsigned int mute;
-		if (spec->jack_present)
-			mute = HDA_AMP_MUTE;
-		else
-			mute = snd_hda_codec_amp_read(codec, 0x15, 0,
-						      HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
+	/* HP */
+	mute = spec->master_sw ? 0 : HDA_AMP_MUTE;
+	snd_hda_codec_amp_stereo(codec, hp_nid, HDA_OUTPUT, 0,
+				 HDA_AMP_MUTE, mute);
+	/* mute internal speaker per jack sense */
+	if (spec->jack_present)
+		mute = HDA_AMP_MUTE;
+	if (line_nid)
+		snd_hda_codec_amp_stereo(codec, line_nid, HDA_OUTPUT, 0,
 					 HDA_AMP_MUTE, mute);
+	if (speaker_nid && speaker_nid != line_nid)
+		snd_hda_codec_amp_stereo(codec, speaker_nid, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+}
+
+#define alc262_hippo_master_sw_get	alc262_hp_master_sw_get
+
+static int alc262_hippo_master_sw_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	int val = !!*ucontrol->value.integer.value;
+
+	if (val == spec->master_sw)
+		return 0;
+	spec->master_sw = val;
+	alc262_hippo_master_update(codec);
+	return 1;
+}
+
+#define ALC262_HIPPO_MASTER_SWITCH				\
+	{							\
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+		.name = "Master Playback Switch",		\
+		.info = snd_ctl_boolean_mono_info,		\
+		.get = alc262_hippo_master_sw_get,		\
+		.put = alc262_hippo_master_sw_put,		\
 	}
-	return change;
+
+static struct snd_kcontrol_new alc262_hippo_mixer[] = {
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
+/* mute/unmute internal speaker according to the hp jack and mute state */
+static void alc262_hippo_automute(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+	unsigned int present;
+
+	/* need to execute and sync at first */
+	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, hp_nid, 0,
+				     AC_VERB_GET_PIN_SENSE, 0);
+	spec->jack_present = (present & 0x80000000) != 0;
+	alc262_hippo_master_update(codec);
+}
+
+static void alc262_hippo_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+	if ((res >> 26) != ALC880_HP_EVENT)
+		return;
+	alc262_hippo_automute(codec);
+}
+
+static void alc262_hippo_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc262_hippo_automute(codec);
+}
+
+static void alc262_hippo1_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc262_hippo_automute(codec);
 }
 
+
 static struct snd_kcontrol_new alc262_sony_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc262_sony_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
@@ -9693,8 +10125,8 @@ static struct snd_kcontrol_new alc262_sony_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc262_benq_t31_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
@@ -9735,34 +10167,15 @@ static struct hda_verb alc262_tyan_verbs[] = {
 };
 
 /* unsolicited event for HP jack sensing */
-static void alc262_tyan_automute(struct hda_codec *codec)
+static void alc262_tyan_init_hook(struct hda_codec *codec)
 {
-	unsigned int mute;
-	unsigned int present;
+	struct alc_spec *spec = codec->spec;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute line output on ATX panel */
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute line output if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x15;
+	alc_automute_amp(codec);
 }
 
-static void alc262_tyan_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_tyan_automute(codec);
-}
 
 #define alc262_capture_mixer		alc882_capture_mixer
 #define alc262_capture_alt_mixer	alc882_capture_alt_mixer
@@ -9917,99 +10330,25 @@ static void alc262_dmic_automute(struct hda_codec *codec)
 				AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x09);
 }
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc262_toshiba_s06_speaker_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x15, 0,
-					AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? 0 : PIN_OUT;
-	snd_hda_codec_write(codec, 0x14, 0,
-					AC_VERB_SET_PIN_WIDGET_CONTROL, bits);
-}
-
-
 
 /* unsolicited event for HP jack sensing */
 static void alc262_toshiba_s06_unsol_event(struct hda_codec *codec,
 				       unsigned int res)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc262_toshiba_s06_speaker_automute(codec);
 	if ((res >> 26) == ALC880_MIC_EVENT)
 		alc262_dmic_automute(codec);
-
+	else
+		alc_sku_unsol_event(codec, res);
 }
 
 static void alc262_toshiba_s06_init_hook(struct hda_codec *codec)
 {
-	alc262_toshiba_s06_speaker_automute(codec);
-	alc262_dmic_automute(codec);
-}
-
-/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hippo_automute(struct hda_codec *codec)
-{
 	struct alc_spec *spec = codec->spec;
-	unsigned int mute;
-	unsigned int present;
-
-	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, 0x15, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
-	if (spec->jack_present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc262_hippo_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hippo_automute(codec);
-}
-
-static void alc262_hippo1_automute(struct hda_codec *codec)
-{
-	unsigned int mute;
-	unsigned int present;
 
-	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc262_hippo1_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc262_hippo1_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
+	alc262_dmic_automute(codec);
 }
 
 /*
@@ -10279,14 +10618,7 @@ static struct snd_kcontrol_new alc262_lenovo_3000_mixer[] = {
 
 static struct snd_kcontrol_new alc262_toshiba_rx1_mixer[] = {
 	HDA_BIND_VOL("Master Playback Volume", &alc262_fujitsu_bind_master_vol),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc262_sony_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
@@ -10633,31 +10965,46 @@ static struct hda_verb alc262_HP_BPC_init_verbs[] = {
 	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
         {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
 
 
 	/* FIXME: use matrix-type input source selection */
-	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
-	/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 0b, 12 */
+	/* Input mixer1: only unmute Mic */
 	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 	/* Input mixer2 */
 	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 	/* Input mixer3 */
 	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
 
 	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 
@@ -10837,6 +11184,8 @@ static int alc262_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x14, 0x1b);
+
 	return 1;
 }
 
@@ -10939,7 +11288,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.input_mux = &alc262_capture_source,
 	},
 	[ALC262_HIPPO] = {
-		.mixers = { alc262_base_mixer },
+		.mixers = { alc262_hippo_mixer },
 		.init_verbs = { alc262_init_verbs, alc262_hippo_unsol_verbs},
 		.num_dacs = ARRAY_SIZE(alc262_dac_nids),
 		.dac_nids = alc262_dac_nids,
@@ -10949,7 +11298,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_HIPPO_1] = {
 		.mixers = { alc262_hippo1_mixer },
@@ -10961,8 +11310,8 @@ static struct alc_config_preset alc262_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_hippo1_unsol_event,
-		.init_hook = alc262_hippo1_automute,
+		.unsol_event = alc262_hippo_unsol_event,
+		.init_hook = alc262_hippo1_init_hook,
 	},
 	[ALC262_FUJITSU] = {
 		.mixers = { alc262_fujitsu_mixer },
@@ -11024,7 +11373,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_hp_t5735_unsol_event,
+		.unsol_event = alc_automute_amp_unsol_event,
 		.init_hook = alc262_hp_t5735_init_hook,
 	},
 	[ALC262_HP_RP5700] = {
@@ -11056,7 +11405,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_BENQ_T31] = {
 		.mixers = { alc262_benq_t31_mixer },
@@ -11068,7 +11417,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_ULTRA] = {
 		.mixers = { alc262_ultra_mixer },
@@ -11133,7 +11482,7 @@ static struct alc_config_preset alc262_presets[] = {
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
 		.unsol_event = alc262_hippo_unsol_event,
-		.init_hook = alc262_hippo_automute,
+		.init_hook = alc262_hippo_init_hook,
 	},
 	[ALC262_TYAN] = {
 		.mixers = { alc262_tyan_mixer },
@@ -11145,8 +11494,8 @@ static struct alc_config_preset alc262_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc262_tyan_unsol_event,
-		.init_hook = alc262_tyan_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc262_tyan_init_hook,
 	},
 };
 
@@ -11181,8 +11530,8 @@ static int patch_alc262(struct hda_codec *codec)
 						  alc262_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC262, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC262_AUTO;
 	}
 
@@ -11211,11 +11560,9 @@ static int patch_alc262(struct hda_codec *codec)
 	if (board_config != ALC262_AUTO)
 		setup_preset(spec, &alc262_presets[board_config]);
 
-	spec->stream_name_analog = "ALC262 Analog";
 	spec->stream_analog_playback = &alc262_pcm_analog_playback;
 	spec->stream_analog_capture = &alc262_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC262 Digital";
 	spec->stream_digital_playback = &alc262_pcm_digital_playback;
 	spec->stream_digital_capture = &alc262_pcm_digital_capture;
 
@@ -11290,6 +11637,17 @@ static struct snd_kcontrol_new alc268_base_mixer[] = {
 	{ }
 };
 
+static struct snd_kcontrol_new alc268_toshiba_mixer[] = {
+	/* output mixer control */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT),
+	{ }
+};
+
 /* bind Beep switches of both NID 0x0f and 0x10 */
 static struct hda_bind_ctls alc268_bind_beep_sw = {
 	.ops = &snd_hda_bind_sw,
@@ -11313,8 +11671,6 @@ static struct hda_verb alc268_eapd_verbs[] = {
 };
 
 /* Toshiba specific */
-#define alc268_toshiba_automute	alc262_hippo_automute
-
 static struct hda_verb alc268_toshiba_verbs[] = {
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 	{ } /* end */
@@ -11450,13 +11806,8 @@ static struct hda_verb alc268_acer_verbs[] = {
 };
 
 /* unsolicited event for HP jack sensing */
-static void alc268_toshiba_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc268_toshiba_automute(codec);
-}
+#define alc268_toshiba_unsol_event	alc262_hippo_unsol_event
+#define alc268_toshiba_init_hook	alc262_hippo_init_hook
 
 static void alc268_acer_unsol_event(struct hda_codec *codec,
 				       unsigned int res)
@@ -11531,30 +11882,15 @@ static struct hda_verb alc268_dell_verbs[] = {
 };
 
 /* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc268_dell_automute(struct hda_codec *codec)
+static void alc268_dell_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned int mute;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0);
-	if (present & 0x80000000)
-		mute = HDA_AMP_MUTE;
-	else
-		mute = snd_hda_codec_amp_read(codec, 0x15, 0, HDA_OUTPUT, 0);
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, mute);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc268_dell_unsol_event(struct hda_codec *codec,
-				    unsigned int res)
-{
-	if ((res >> 26) != ALC880_HP_EVENT)
-		return;
-	alc268_dell_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
 }
 
-#define alc268_dell_init_hook	alc268_dell_automute
-
 static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = {
 	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x2, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
@@ -11573,16 +11909,6 @@ static struct hda_verb alc267_quanta_il1_verbs[] = {
 	{ }
 };
 
-static void alc267_quanta_il1_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-
-	present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    present ? 0 : PIN_OUT);
-}
-
 static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -11594,9 +11920,13 @@ static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
 			    present ? 0x00 : 0x01);
 }
 
-static void alc267_quanta_il1_automute(struct hda_codec *codec)
+static void alc267_quanta_il1_init_hook(struct hda_codec *codec)
 {
-	alc267_quanta_il1_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_pin(codec);
 	alc267_quanta_il1_mic_automute(codec);
 }
 
@@ -11604,12 +11934,12 @@ static void alc267_quanta_il1_unsol_event(struct hda_codec *codec,
 					   unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc267_quanta_il1_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc267_quanta_il1_mic_automute(codec);
 		break;
+	default:
+		alc_sku_unsol_event(codec, res);
+		break;
 	}
 }
 
@@ -12057,15 +12387,16 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 						ALC268_ACER_ASPIRE_ONE),
 	SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
 	SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
-	SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series",
+			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
-	SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
-	SND_PCI_QUIRK(0x1179, 0xff64, "TOSHIBA L305", ALC268_TOSHIBA),
+	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
+	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
 	SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
-	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
+	SND_PCI_QUIRK(0x1854, 0x1775, "LG R510", ALC268_DELL),
 	{}
 };
 
@@ -12083,7 +12414,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc267_quanta_il1_unsol_event,
-		.init_hook = alc267_quanta_il1_automute,
+		.init_hook = alc267_quanta_il1_init_hook,
 	},
 	[ALC268_3ST] = {
 		.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
@@ -12101,7 +12432,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.input_mux = &alc268_capture_source,
 	},
 	[ALC268_TOSHIBA] = {
-		.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
+		.mixers = { alc268_toshiba_mixer, alc268_capture_alt_mixer,
 			    alc268_beep_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc268_toshiba_verbs },
@@ -12115,7 +12446,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc268_toshiba_unsol_event,
-		.init_hook = alc268_toshiba_automute,
+		.init_hook = alc268_toshiba_init_hook,
 	},
 	[ALC268_ACER] = {
 		.mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
@@ -12178,7 +12509,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.hp_nid = 0x02,
 		.num_channel_mode = ARRAY_SIZE(alc268_modes),
 		.channel_mode = alc268_modes,
-		.unsol_event = alc268_dell_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.init_hook = alc268_dell_init_hook,
 		.input_mux = &alc268_capture_source,
 	},
@@ -12198,7 +12529,7 @@ static struct alc_config_preset alc268_presets[] = {
 		.channel_mode = alc268_modes,
 		.input_mux = &alc268_capture_source,
 		.unsol_event = alc268_toshiba_unsol_event,
-		.init_hook = alc268_toshiba_automute
+		.init_hook = alc268_toshiba_init_hook
 	},
 #ifdef CONFIG_SND_DEBUG
 	[ALC268_TEST] = {
@@ -12236,8 +12567,8 @@ static int patch_alc268(struct hda_codec *codec)
 						  alc268_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC268, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC268_AUTO;
 	}
 
@@ -12258,14 +12589,6 @@ static int patch_alc268(struct hda_codec *codec)
 	if (board_config != ALC268_AUTO)
 		setup_preset(spec, &alc268_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0267) {
-		spec->stream_name_analog = "ALC267 Analog";
-		spec->stream_name_digital = "ALC267 Digital";
-	} else {
-		spec->stream_name_analog = "ALC268 Analog";
-		spec->stream_name_digital = "ALC268 Digital";
-	}
-
 	spec->stream_analog_playback = &alc268_pcm_analog_playback;
 	spec->stream_analog_capture = &alc268_pcm_analog_capture;
 	spec->stream_analog_alt_capture = &alc268_pcm_analog_alt_capture;
@@ -13092,8 +13415,8 @@ static int patch_alc269(struct hda_codec *codec)
 						  alc269_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC269, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC269_AUTO;
 	}
 
@@ -13120,7 +13443,6 @@ static int patch_alc269(struct hda_codec *codec)
 	if (board_config != ALC269_AUTO)
 		setup_preset(spec, &alc269_presets[board_config]);
 
-	spec->stream_name_analog = "ALC269 Analog";
 	if (codec->subsystem_id == 0x17aa3bf8) {
 		/* Due to a hardware problem on Lenovo Ideadpad, we need to
 		 * fix the sample rate of analog I/O to 44.1kHz
@@ -13131,7 +13453,6 @@ static int patch_alc269(struct hda_codec *codec)
 		spec->stream_analog_playback = &alc269_pcm_analog_playback;
 		spec->stream_analog_capture = &alc269_pcm_analog_capture;
 	}
-	spec->stream_name_digital = "ALC269 Digital";
 	spec->stream_digital_playback = &alc269_pcm_digital_playback;
 	spec->stream_digital_capture = &alc269_pcm_digital_capture;
 
@@ -13920,7 +14241,6 @@ static void alc861_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x0e, 0x0f, 0x0b);
 	for (i = 0; i < spec->autocfg.line_outs; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -14003,6 +14323,8 @@ static int alc861_parse_auto_config(struct hda_codec *codec)
 	spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
 	set_capture_mixer(spec);
 
+	alc_ssid_check(codec, 0x0e, 0x0f, 0x0b);
+
 	return 1;
 }
 
@@ -14192,8 +14514,8 @@ static int patch_alc861(struct hda_codec *codec)
 						  alc861_cfg_tbl);
 
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC861, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC861_AUTO;
 	}
 
@@ -14220,11 +14542,9 @@ static int patch_alc861(struct hda_codec *codec)
 	if (board_config != ALC861_AUTO)
 		setup_preset(spec, &alc861_presets[board_config]);
 
-	spec->stream_name_analog = "ALC861 Analog";
 	spec->stream_analog_playback = &alc861_pcm_analog_playback;
 	spec->stream_analog_capture = &alc861_pcm_analog_capture;
 
-	spec->stream_name_digital = "ALC861 Digital";
 	spec->stream_digital_playback = &alc861_pcm_digital_playback;
 	spec->stream_digital_capture = &alc861_pcm_digital_capture;
 
@@ -14611,19 +14931,6 @@ static struct hda_verb alc861vd_lenovo_unsol_verbs[] = {
 	{}
 };
 
-/* toggle speaker-output according to the hp-jack state */
-static void alc861vd_lenovo_hp_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, bits);
-}
-
 static void alc861vd_lenovo_mic_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -14636,9 +14943,13 @@ static void alc861vd_lenovo_mic_automute(struct hda_codec *codec)
 				 HDA_AMP_MUTE, bits);
 }
 
-static void alc861vd_lenovo_automute(struct hda_codec *codec)
+static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
 {
-	alc861vd_lenovo_hp_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x1b;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 	alc861vd_lenovo_mic_automute(codec);
 }
 
@@ -14646,12 +14957,12 @@ static void alc861vd_lenovo_unsol_event(struct hda_codec *codec,
 					unsigned int res)
 {
 	switch (res >> 26) {
-	case ALC880_HP_EVENT:
-		alc861vd_lenovo_hp_automute(codec);
-		break;
 	case ALC880_MIC_EVENT:
 		alc861vd_lenovo_mic_automute(codec);
 		break;
+	default:
+		alc_automute_amp_unsol_event(codec, res);
+		break;
 	}
 }
 
@@ -14701,20 +15012,13 @@ static struct hda_verb alc861vd_dallas_verbs[] = {
 };
 
 /* toggle speaker-output according to the hp-jack state */
-static void alc861vd_dallas_automute(struct hda_codec *codec)
+static void alc861vd_dallas_init_hook(struct hda_codec *codec)
 {
-	unsigned int present;
-
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-}
+	struct alc_spec *spec = codec->spec;
 
-static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc861vd_dallas_automute(codec);
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	alc_automute_amp(codec);
 }
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -14828,7 +15132,7 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_capture_source,
 		.unsol_event = alc861vd_lenovo_unsol_event,
-		.init_hook = alc861vd_lenovo_automute,
+		.init_hook = alc861vd_lenovo_init_hook,
 	},
 	[ALC861VD_DALLAS] = {
 		.mixers = { alc861vd_dallas_mixer },
@@ -14838,8 +15142,8 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_dallas_capture_source,
-		.unsol_event = alc861vd_dallas_unsol_event,
-		.init_hook = alc861vd_dallas_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc861vd_dallas_init_hook,
 	},
 	[ALC861VD_HP] = {
 		.mixers = { alc861vd_hp_mixer },
@@ -14850,8 +15154,8 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_hp_capture_source,
-		.unsol_event = alc861vd_dallas_unsol_event,
-		.init_hook = alc861vd_dallas_automute,
+		.unsol_event = alc_automute_amp_unsol_event,
+		.init_hook = alc861vd_dallas_init_hook,
 	},
 	[ALC660VD_ASUS_V1S] = {
 		.mixers = { alc861vd_lenovo_mixer },
@@ -14866,7 +15170,7 @@ static struct alc_config_preset alc861vd_presets[] = {
 		.channel_mode = alc861vd_3stack_2ch_modes,
 		.input_mux = &alc861vd_capture_source,
 		.unsol_event = alc861vd_lenovo_unsol_event,
-		.init_hook = alc861vd_lenovo_automute,
+		.init_hook = alc861vd_lenovo_init_hook,
 	},
 };
 
@@ -14884,7 +15188,6 @@ static void alc861vd_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -15102,6 +15405,8 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -15133,8 +15438,8 @@ static int patch_alc861vd(struct hda_codec *codec)
 						  alc861vd_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC660VD/"
-			"ALC861VD, trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC861VD_AUTO;
 	}
 
@@ -15162,13 +15467,8 @@ static int patch_alc861vd(struct hda_codec *codec)
 		setup_preset(spec, &alc861vd_presets[board_config]);
 
 	if (codec->vendor_id == 0x10ec0660) {
-		spec->stream_name_analog = "ALC660-VD Analog";
-		spec->stream_name_digital = "ALC660-VD Digital";
 		/* always turn on EAPD */
 		add_verb(spec, alc660vd_eapd_verbs);
-	} else {
-		spec->stream_name_analog = "ALC861VD Analog";
-		spec->stream_name_digital = "ALC861VD Digital";
 	}
 
 	spec->stream_analog_playback = &alc861vd_pcm_analog_playback;
@@ -15282,6 +15582,38 @@ static struct hda_input_mux alc663_m51va_capture_source = {
 	},
 };
 
+#if 1 /* set to 0 for testing other input sources below */
+static struct hda_input_mux alc272_nc10_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "Autoselect Mic", 0x0 },
+		{ "Internal Mic", 0x1 },
+	},
+};
+#else
+static struct hda_input_mux alc272_nc10_capture_source = {
+	.num_items = 16,
+	.items = {
+		{ "Autoselect Mic", 0x0 },
+		{ "Internal Mic", 0x1 },
+		{ "In-0x02", 0x2 },
+		{ "In-0x03", 0x3 },
+		{ "In-0x04", 0x4 },
+		{ "In-0x05", 0x5 },
+		{ "In-0x06", 0x6 },
+		{ "In-0x07", 0x7 },
+		{ "In-0x08", 0x8 },
+		{ "In-0x09", 0x9 },
+		{ "In-0x0a", 0x0a },
+		{ "In-0x0b", 0x0b },
+		{ "In-0x0c", 0x0c },
+		{ "In-0x0d", 0x0d },
+		{ "In-0x0e", 0x0e },
+		{ "In-0x0f", 0x0f },
+	},
+};
+#endif
+
 /*
  * 2ch mode
  */
@@ -15421,10 +15753,8 @@ static struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
 
 	HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -15437,15 +15767,11 @@ static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = {
-	HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	ALC262_HIPPO_MASTER_SWITCH,
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x04, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x04, 2, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("MuteCtrl Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
@@ -15953,51 +16279,25 @@ static void alc662_eeepc_mic_automute(struct hda_codec *codec)
 static void alc662_eeepc_unsol_event(struct hda_codec *codec,
 				     unsigned int res)
 {
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc262_hippo1_automute( codec );
-
 	if ((res >> 26) == ALC880_MIC_EVENT)
 		alc662_eeepc_mic_automute(codec);
+	else
+		alc262_hippo_unsol_event(codec, res);
 }
 
 static void alc662_eeepc_inithook(struct hda_codec *codec)
 {
-	alc262_hippo1_automute( codec );
+	alc262_hippo1_init_hook(codec);
 	alc662_eeepc_mic_automute(codec);
 }
 
-static void alc662_eeepc_ep20_automute(struct hda_codec *codec)
-{
-	unsigned int mute;
-	unsigned int present;
-
-	snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present = (present & 0x80000000) != 0;
-	if (present) {
-		/* mute internal speaker */
-		snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-					HDA_AMP_MUTE, HDA_AMP_MUTE);
-	} else {
-		/* unmute internal speaker if necessary */
-		mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
-		snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-					HDA_AMP_MUTE, mute);
-	}
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc662_eeepc_ep20_unsol_event(struct hda_codec *codec,
-					  unsigned int res)
-{
-	if ((res >> 26) == ALC880_HP_EVENT)
-		alc662_eeepc_ep20_automute(codec);
-}
-
 static void alc662_eeepc_ep20_inithook(struct hda_codec *codec)
 {
-	alc662_eeepc_ep20_automute(codec);
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[0] = 0x1b;
+	alc262_hippo_master_update(codec);
 }
 
 static void alc663_m51va_speaker_automute(struct hda_codec *codec)
@@ -16331,35 +16631,9 @@ static void alc663_g50v_inithook(struct hda_codec *codec)
 	alc662_eeepc_mic_automute(codec);
 }
 
-/* bind hp and internal speaker mute (with plug check) */
-static int alc662_ecs_master_sw_put(struct snd_kcontrol *kcontrol,
-				     struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	long *valp = ucontrol->value.integer.value;
-	int change;
-
-	change = snd_hda_codec_amp_update(codec, 0x1b, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x1b, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
-	if (change)
-		alc262_hippo1_automute(codec);
-	return change;
-}
-
 static struct snd_kcontrol_new alc662_ecs_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Master Playback Switch",
-		.info = snd_hda_mixer_amp_switch_info,
-		.get = snd_hda_mixer_amp_switch_get,
-		.put = alc662_ecs_master_sw_put,
-		.private_value = HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
-	},
+	ALC262_HIPPO_MASTER_SWITCH,
 
 	HDA_CODEC_VOLUME("e-Mic/LineIn Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("e-Mic/LineIn Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -16371,6 +16645,23 @@ static struct snd_kcontrol_new alc662_ecs_mixer[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc272_nc10_mixer[] = {
+	/* Master Playback automatically created from Speaker and Headphone */
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+
+	HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Ext Mic Boost", 0x18, 0, HDA_INPUT),
+
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 #define alc662_loopbacks	alc880_loopbacks
 #endif
@@ -16404,6 +16695,9 @@ static const char *alc662_models[ALC662_MODEL_LAST] = {
 	[ALC663_ASUS_MODE4] = "asus-mode4",
 	[ALC663_ASUS_MODE5] = "asus-mode5",
 	[ALC663_ASUS_MODE6] = "asus-mode6",
+	[ALC272_DELL]		= "dell",
+	[ALC272_DELL_ZM1]	= "dell-zm1",
+	[ALC272_SAMSUNG_NC10]	= "samsung-nc10",
 	[ALC662_AUTO]		= "auto",
 };
 
@@ -16461,6 +16755,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
@@ -16551,7 +16846,7 @@ static struct alc_config_preset alc662_presets[] = {
 		.num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
 		.channel_mode = alc662_3ST_6ch_modes,
 		.input_mux = &alc662_lenovo_101e_capture_source,
-		.unsol_event = alc662_eeepc_ep20_unsol_event,
+		.unsol_event = alc662_eeepc_unsol_event,
 		.init_hook = alc662_eeepc_ep20_inithook,
 	},
 	[ALC662_ECS] = {
@@ -16732,6 +17027,18 @@ static struct alc_config_preset alc662_presets[] = {
 		.unsol_event = alc663_m51va_unsol_event,
 		.init_hook = alc663_m51va_inithook,
 	},
+	[ALC272_SAMSUNG_NC10] = {
+		.mixers = { alc272_nc10_mixer },
+		.init_verbs = { alc662_init_verbs,
+				alc663_21jd_amic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc272_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc272_nc10_capture_source,
+		.unsol_event = alc663_mode4_unsol_event,
+		.init_hook = alc663_mode4_inithook,
+	},
 };
 
 
@@ -16926,7 +17233,6 @@ static void alc662_auto_init_multi_out(struct hda_codec *codec)
 	struct alc_spec *spec = codec->spec;
 	int i;
 
-	alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
 		int pin_type = get_pin_type(spec->autocfg.line_out_type);
@@ -17023,6 +17329,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -17055,8 +17363,8 @@ static int patch_alc662(struct hda_codec *codec)
 						  alc662_models,
 			  	                  alc662_cfg_tbl);
 	if (board_config < 0) {
-		printk(KERN_INFO "hda_codec: Unknown model for ALC662, "
-		       "trying auto-probe from BIOS...\n");
+		printk(KERN_INFO "hda_codec: Unknown model for %s, "
+		       "trying auto-probe from BIOS...\n", codec->chip_name);
 		board_config = ALC662_AUTO;
 	}
 
@@ -17083,17 +17391,6 @@ static int patch_alc662(struct hda_codec *codec)
 	if (board_config != ALC662_AUTO)
 		setup_preset(spec, &alc662_presets[board_config]);
 
-	if (codec->vendor_id == 0x10ec0663) {
-		spec->stream_name_analog = "ALC663 Analog";
-		spec->stream_name_digital = "ALC663 Digital";
-	} else if (codec->vendor_id == 0x10ec0272) {
-		spec->stream_name_analog = "ALC272 Analog";
-		spec->stream_name_digital = "ALC272 Digital";
-	} else {
-		spec->stream_name_analog = "ALC662 Analog";
-		spec->stream_name_digital = "ALC662 Digital";
-	}
-
 	spec->stream_analog_playback = &alc662_pcm_analog_playback;
 	spec->stream_analog_capture = &alc662_pcm_analog_capture;
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 03b3646018a..93e47c96a38 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -100,6 +100,7 @@ enum {
 	STAC_HP_M4,
 	STAC_HP_DV5,
 	STAC_HP_HDX,
+	STAC_HP_DV4_1222NR,
 	STAC_92HD71BXX_MODELS
 };
 
@@ -150,6 +151,7 @@ enum {
 	STAC_D965_REF,
 	STAC_D965_3ST,
 	STAC_D965_5ST,
+	STAC_D965_5ST_NO_FP,
 	STAC_DELL_3ST,
 	STAC_DELL_BIOS,
 	STAC_927X_MODELS
@@ -192,6 +194,7 @@ struct sigmatel_spec {
 	unsigned int gpio_dir;
 	unsigned int gpio_data;
 	unsigned int gpio_mute;
+	unsigned int gpio_led;
 
 	/* stream */
 	unsigned int stream_delay;
@@ -633,6 +636,40 @@ static int stac92xx_smux_enum_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static unsigned int stac92xx_vref_set(struct hda_codec *codec,
+					hda_nid_t nid, unsigned int new_vref)
+{
+	unsigned int error;
+	unsigned int pincfg;
+	pincfg = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+
+	pincfg &= 0xff;
+	pincfg &= ~(AC_PINCTL_VREFEN | AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+	pincfg |= new_vref;
+
+	if (new_vref == AC_PINCTL_VREF_HIZ)
+		pincfg |= AC_PINCTL_OUT_EN;
+	else
+		pincfg |= AC_PINCTL_IN_EN;
+
+	error = snd_hda_codec_write_cache(codec, nid, 0,
+					AC_VERB_SET_PIN_WIDGET_CONTROL, pincfg);
+	if (error < 0)
+		return error;
+	else
+		return 1;
+}
+
+static unsigned int stac92xx_vref_get(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int vref;
+	vref = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+	vref &= AC_PINCTL_VREFEN;
+	return vref;
+}
+
 static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -994,6 +1031,17 @@ static struct hda_verb stac9205_core_init[] = {
 		.private_value = verb_read | (verb_write << 16), \
 	}
 
+#define DC_BIAS(xname, idx, nid) \
+	{ \
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+		.name = xname, \
+		.index = idx, \
+		.info = stac92xx_dc_bias_info, \
+		.get = stac92xx_dc_bias_get, \
+		.put = stac92xx_dc_bias_put, \
+		.private_value = nid, \
+	}
+
 static struct snd_kcontrol_new stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -1542,6 +1590,8 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
+		      "SigmaTel",STAC_9205_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_REF),
 	/* Dell laptops have BIOS problem */
@@ -1836,6 +1886,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
 	[STAC_HP_M4]		= NULL,
 	[STAC_HP_DV5]		= NULL,
 	[STAC_HP_HDX]           = NULL,
+	[STAC_HP_DV4_1222NR]	= NULL,
 };
 
 static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
@@ -1847,6 +1898,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
 	[STAC_HP_M4] = "hp-m4",
 	[STAC_HP_DV5] = "hp-dv5",
 	[STAC_HP_HDX] = "hp-hdx",
+	[STAC_HP_DV4_1222NR] = "hp-dv4-1222nr",
 };
 
 static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
@@ -1855,6 +1907,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 		      "DFI LanParty", STAC_92HD71BXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
 		      "DFI LanParty", STAC_92HD71BXX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
+		      "HP dv4-1222nr", STAC_HP_DV4_1222NR),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
 		      "HP", STAC_HP_DV5),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
@@ -2154,6 +2208,13 @@ static unsigned int d965_5st_pin_configs[14] = {
 	0x40000100, 0x40000100
 };
 
+static unsigned int d965_5st_no_fp_pin_configs[14] = {
+	0x40000100, 0x40000100, 0x0181304e, 0x01014010,
+	0x01a19040, 0x01011012, 0x01016011, 0x40000100,
+	0x40000100, 0x40000100, 0x40000100, 0x01442070,
+	0x40000100, 0x40000100
+};
+
 static unsigned int dell_3st_pin_configs[14] = {
 	0x02211230, 0x02a11220, 0x01a19040, 0x01114210,
 	0x01111212, 0x01116211, 0x01813050, 0x01112214,
@@ -2166,6 +2227,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
 	[STAC_D965_REF]  = ref927x_pin_configs,
 	[STAC_D965_3ST]  = d965_3st_pin_configs,
 	[STAC_D965_5ST]  = d965_5st_pin_configs,
+	[STAC_D965_5ST_NO_FP]  = d965_5st_no_fp_pin_configs,
 	[STAC_DELL_3ST]  = dell_3st_pin_configs,
 	[STAC_DELL_BIOS] = NULL,
 };
@@ -2176,6 +2238,7 @@ static const char *stac927x_models[STAC_927X_MODELS] = {
 	[STAC_D965_REF]		= "ref",
 	[STAC_D965_3ST]		= "3stack",
 	[STAC_D965_5ST]		= "5stack",
+	[STAC_D965_5ST_NO_FP]	= "5stack-no-fp",
 	[STAC_DELL_3ST]		= "dell-3stack",
 	[STAC_DELL_BIOS]	= "dell-bios",
 };
@@ -2535,7 +2598,8 @@ static int stac92xx_build_pcms(struct hda_codec *codec)
 	return 0;
 }
 
-static unsigned int stac92xx_get_vref(struct hda_codec *codec, hda_nid_t nid)
+static unsigned int stac92xx_get_default_vref(struct hda_codec *codec,
+					hda_nid_t nid)
 {
 	unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
 	pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
@@ -2589,15 +2653,108 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
-#define stac92xx_io_switch_info		snd_ctl_boolean_mono_info
+static int stac92xx_dc_bias_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	int i;
+	static char *texts[] = {
+		"Mic In", "Line In", "Line Out"
+	};
+
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid = kcontrol->private_value;
+
+	if (nid == spec->mic_switch || nid == spec->line_switch)
+		i = 3;
+	else
+		i = 2;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = i;
+	uinfo->count = 1;
+	if (uinfo->value.enumerated.item >= i)
+		uinfo->value.enumerated.item = i-1;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value;
+	unsigned int vref = stac92xx_vref_get(codec, nid);
+
+	if (vref == stac92xx_get_default_vref(codec, nid))
+		ucontrol->value.enumerated.item[0] = 0;
+	else if (vref == AC_PINCTL_VREF_GRD)
+		ucontrol->value.enumerated.item[0] = 1;
+	else if (vref == AC_PINCTL_VREF_HIZ)
+		ucontrol->value.enumerated.item[0] = 2;
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int new_vref = 0;
+	unsigned int error;
+	hda_nid_t nid = kcontrol->private_value;
+
+	if (ucontrol->value.enumerated.item[0] == 0)
+		new_vref = stac92xx_get_default_vref(codec, nid);
+	else if (ucontrol->value.enumerated.item[0] == 1)
+		new_vref = AC_PINCTL_VREF_GRD;
+	else if (ucontrol->value.enumerated.item[0] == 2)
+		new_vref = AC_PINCTL_VREF_HIZ;
+	else
+		return 0;
+
+	if (new_vref != stac92xx_vref_get(codec, nid)) {
+		error = stac92xx_vref_set(codec, nid, new_vref);
+		return error;
+	}
+
+	return 0;
+}
+
+static int stac92xx_io_switch_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[2];
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (kcontrol->private_value == spec->line_switch)
+		texts[0] = "Line In";
+	else
+		texts[0] = "Mic In";
+	texts[1] = "Line Out";
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = 2;
+	uinfo->count = 1;
+
+	if (uinfo->value.enumerated.item >= 2)
+		uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
 
 static int stac92xx_io_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-	int io_idx = kcontrol-> private_value & 0xff;
+	hda_nid_t nid = kcontrol->private_value;
+	int io_idx = (nid == spec->mic_switch) ? 1 : 0;
 
-	ucontrol->value.integer.value[0] = spec->io_switch[io_idx];
+	ucontrol->value.enumerated.item[0] = spec->io_switch[io_idx];
 	return 0;
 }
 
@@ -2605,9 +2762,9 @@ static int stac92xx_io_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 {
         struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-        hda_nid_t nid = kcontrol->private_value >> 8;
-	int io_idx = kcontrol-> private_value & 0xff;
-	unsigned short val = !!ucontrol->value.integer.value[0];
+	hda_nid_t nid = kcontrol->private_value;
+	int io_idx = (nid == spec->mic_switch) ? 1 : 0;
+	unsigned short val = !!ucontrol->value.enumerated.item[0];
 
 	spec->io_switch[io_idx] = val;
 
@@ -2616,7 +2773,7 @@ static int stac92xx_io_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
 	else {
 		unsigned int pinctl = AC_PINCTL_IN_EN;
 		if (io_idx) /* set VREF for mic */
-			pinctl |= stac92xx_get_vref(codec, nid);
+			pinctl |= stac92xx_get_default_vref(codec, nid);
 		stac92xx_auto_set_pinctl(codec, nid, pinctl);
 	}
 
@@ -2697,7 +2854,8 @@ enum {
 	STAC_CTL_WIDGET_AMP_VOL,
 	STAC_CTL_WIDGET_HP_SWITCH,
 	STAC_CTL_WIDGET_IO_SWITCH,
-	STAC_CTL_WIDGET_CLFE_SWITCH
+	STAC_CTL_WIDGET_CLFE_SWITCH,
+	STAC_CTL_WIDGET_DC_BIAS
 };
 
 static struct snd_kcontrol_new stac92xx_control_templates[] = {
@@ -2709,6 +2867,7 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = {
 	STAC_CODEC_HP_SWITCH(NULL),
 	STAC_CODEC_IO_SWITCH(NULL, 0),
 	STAC_CODEC_CLFE_SWITCH(NULL, 0),
+	DC_BIAS(NULL, 0, 0),
 };
 
 /* add dynamic controls */
@@ -2772,6 +2931,34 @@ static struct snd_kcontrol_new stac_input_src_temp = {
 	.put = stac92xx_mux_enum_put,
 };
 
+static inline int stac92xx_add_jack_mode_control(struct hda_codec *codec,
+						hda_nid_t nid, int idx)
+{
+	int def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	int control = 0;
+	struct sigmatel_spec *spec = codec->spec;
+	char name[22];
+
+	if (!((get_defcfg_connect(def_conf)) & AC_JACK_PORT_FIXED)) {
+		if (stac92xx_get_default_vref(codec, nid) == AC_PINCTL_VREF_GRD
+			&& nid == spec->line_switch)
+			control = STAC_CTL_WIDGET_IO_SWITCH;
+		else if (snd_hda_query_pin_caps(codec, nid)
+			& (AC_PINCAP_VREF_GRD << AC_PINCAP_VREF_SHIFT))
+			control = STAC_CTL_WIDGET_DC_BIAS;
+		else if (nid == spec->mic_switch)
+			control = STAC_CTL_WIDGET_IO_SWITCH;
+	}
+
+	if (control) {
+		strcpy(name, auto_pin_cfg_labels[idx]);
+		return stac92xx_add_control(codec->spec, control,
+					strcat(name, " Jack Mode"), nid);
+	}
+
+	return 0;
+}
+
 static int stac92xx_add_input_source(struct sigmatel_spec *spec)
 {
 	struct snd_kcontrol_new *knew;
@@ -3134,7 +3321,9 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 					       const struct auto_pin_cfg *cfg)
 {
 	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid;
 	int err;
+	int idx;
 
 	err = create_multi_out_ctls(codec, cfg->line_outs, cfg->line_out_pins,
 				    spec->multiout.dac_nids,
@@ -3151,20 +3340,13 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 			return err;
 	}
 
-	if (spec->line_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Line In as Output Switch",
-					   spec->line_switch << 8);
-		if (err < 0)
-			return err;
-	}
-
-	if (spec->mic_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Mic as Output Switch",
-					   (spec->mic_switch << 8) | 1);
-		if (err < 0)
-			return err;
+	for (idx = AUTO_PIN_MIC; idx <= AUTO_PIN_FRONT_LINE; idx++) {
+		nid = cfg->input_pins[idx];
+		if (nid) {
+			err = stac92xx_add_jack_mode_control(codec, nid, idx);
+			if (err < 0)
+				return err;
+		}
 	}
 
 	return 0;
@@ -3629,6 +3811,8 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
 		err = snd_hda_attach_beep_device(codec, nid);
 		if (err < 0)
 			return err;
+		/* IDT/STAC codecs have linear beep tone parameter */
+		codec->beep->linear_tone = 1;
 		/* if no beep switch is available, make its own one */
 		caps = query_amp_caps(codec, nid, HDA_OUTPUT);
 		if (codec->beep &&
@@ -4072,7 +4256,7 @@ static int stac92xx_init(struct hda_codec *codec)
 			unsigned int pinctl, conf;
 			if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) {
 				/* for mic pins, force to initialize */
-				pinctl = stac92xx_get_vref(codec, nid);
+				pinctl = stac92xx_get_default_vref(codec, nid);
 				pinctl |= AC_PINCTL_IN_EN;
 				stac92xx_auto_set_pinctl(codec, nid, pinctl);
 			} else {
@@ -4525,17 +4709,19 @@ static int stac92xx_resume(struct hda_codec *codec)
 	return 0;
 }
 
-
 /*
- * using power check for controlling mute led of HP HDX notebooks
+ * using power check for controlling mute led of HP notebooks
  * check for mute state only on Speakers (nid = 0x10)
  *
  * For this feature CONFIG_SND_HDA_POWER_SAVE is needed, otherwise
  * the LED is NOT working properly !
+ *
+ * Changed name to reflect that it now works for any designated
+ * model, not just HP HDX.
  */
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
-static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec,
+static int stac92xx_hp_check_power_status(struct hda_codec *codec,
 					      hda_nid_t nid)
 {
 	struct sigmatel_spec *spec = codec->spec;
@@ -4543,9 +4729,9 @@ static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec,
 	if (nid == 0x10) {
 		if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
 		    HDA_AMP_MUTE)
-			spec->gpio_data &= ~0x08;  /* orange */
+			spec->gpio_data &= ~spec->gpio_led; /* orange */
 		else
-			spec->gpio_data |= 0x08;   /* white */
+			spec->gpio_data |= spec->gpio_led; /* white */
 
 		stac_gpio_set(codec, spec->gpio_mask,
 			      spec->gpio_dir,
@@ -5191,6 +5377,15 @@ again:
 	if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
 		snd_hda_sequence_write_cache(codec, unmute_init);
 
+	/* Some HP machines seem to have unstable codec communications
+	 * especially with ATI fglrx driver.  For recovering from the
+	 * CORB/RIRB stall, allow the BUS reset and keep always sync
+	 */
+	if (spec->board_config == STAC_HP_DV5) {
+		codec->bus->sync_write = 1;
+		codec->bus->allow_bus_reset = 1;
+	}
+
 	spec->aloopback_ctl = stac92hd71bxx_loopback;
 	spec->aloopback_mask = 0x50;
 	spec->aloopback_shift = 0;
@@ -5224,6 +5419,15 @@ again:
 		spec->num_smuxes = 0;
 		spec->num_dmuxes = 1;
 		break;
+	case STAC_HP_DV4_1222NR:
+		spec->num_dmics = 1;
+		/* I don't know if it needs 1 or 2 smuxes - will wait for
+		 * bug reports to fix if needed
+		 */
+		spec->num_smuxes = 1;
+		spec->num_dmuxes = 1;
+		spec->gpio_led = 0x01;
+		/* fallthrough */
 	case STAC_HP_DV5:
 		snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
 		stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
@@ -5232,22 +5436,21 @@ again:
 		spec->num_dmics = 1;
 		spec->num_dmuxes = 1;
 		spec->num_smuxes = 1;
-		/*
-		 * For controlling MUTE LED on HP HDX16/HDX18 notebooks,
-		 * the CONFIG_SND_HDA_POWER_SAVE is needed to be set.
-		 */
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 		/* orange/white mute led on GPIO3, orange=0, white=1 */
-		spec->gpio_mask |= 0x08;
-		spec->gpio_dir  |= 0x08;
-		spec->gpio_data |= 0x08;  /* set to white */
+		spec->gpio_led = 0x08;
+		break;
+	}
 
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	if (spec->gpio_led) {
+		spec->gpio_mask |= spec->gpio_led;
+		spec->gpio_dir |= spec->gpio_led;
+		spec->gpio_data |= spec->gpio_led;
 		/* register check_power_status callback. */
 		codec->patch_ops.check_power_status =
-		    stac92xx_hp_hdx_check_power_status;
+			stac92xx_hp_check_power_status;
+	}
 #endif	
-		break;
-	};
 
 	spec->multiout.dac_nids = spec->dac_nids;
 	if (spec->dinput_mux)
@@ -5272,7 +5475,7 @@ again:
 	codec->proc_widget_hook = stac92hd7x_proc_hook;
 
 	return 0;
-};
+}
 
 static int patch_stac922x(struct hda_codec *codec)
 {
@@ -5427,7 +5630,7 @@ static int patch_stac927x(struct hda_codec *codec)
 			/* correct the device field to SPDIF out */
 			snd_hda_codec_set_pincfg(codec, 0x21, 0x01442070);
 			break;
-		};
+		}
 		/* configure the analog microphone on some laptops */
 		snd_hda_codec_set_pincfg(codec, 0x0c, 0x90a79130);
 		/* correct the front output jack as a hp out */
@@ -5737,6 +5940,7 @@ static struct hda_codec_preset snd_hda_preset_sigmatel[] = {
  	{ .id = 0x83847661, .name = "CXD9872RD/K", .patch = patch_stac9872 },
  	{ .id = 0x83847662, .name = "STAC9872AK", .patch = patch_stac9872 },
  	{ .id = 0x83847664, .name = "CXD9872AKD", .patch = patch_stac9872 },
+	{ .id = 0x83847698, .name = "STAC9205", .patch = patch_stac9205 },
  	{ .id = 0x838476a0, .name = "STAC9205", .patch = patch_stac9205 },
  	{ .id = 0x838476a1, .name = "STAC9205D", .patch = patch_stac9205 },
  	{ .id = 0x838476a2, .name = "STAC9204", .patch = patch_stac9205 },
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index b25a5cc637d..8e004fb6961 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -205,7 +205,7 @@ struct via_spec {
 
 	/* playback */
 	struct hda_multi_out multiout;
-	hda_nid_t extra_dig_out_nid;
+	hda_nid_t slave_dig_outs[2];
 
 	/* capture */
 	unsigned int num_adc_nids;
@@ -731,21 +731,6 @@ static int via_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
-/* setup SPDIF output stream */
-static void setup_dig_playback_stream(struct hda_codec *codec, hda_nid_t nid,
-				 unsigned int stream_tag, unsigned int format)
-{
-	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
-	if (codec->spdif_ctls & AC_DIG1_ENABLE)
-		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				    codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
-	snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
-	/* turn on again (if needed) */
-	if (codec->spdif_ctls & AC_DIG1_ENABLE)
-		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				    codec->spdif_ctls & 0xff);
-}
-
 static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
@@ -753,19 +738,16 @@ static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					struct snd_pcm_substream *substream)
 {
 	struct via_spec *spec = codec->spec;
-	hda_nid_t nid;
-
-	/* 1st or 2nd S/PDIF */
-	if (substream->number == 0)
-		nid = spec->multiout.dig_out_nid;
-	else if (substream->number == 1)
-		nid = spec->extra_dig_out_nid;
-	else
-		return -1;
+	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+					     stream_tag, format, substream);
+}
 
-	mutex_lock(&codec->spdif_mutex);
-	setup_dig_playback_stream(codec, nid, stream_tag, format);
-	mutex_unlock(&codec->spdif_mutex);
+static int via_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					struct snd_pcm_substream *substream)
+{
+	struct via_spec *spec = codec->spec;
+	snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
 	return 0;
 }
 
@@ -842,7 +824,8 @@ static struct hda_pcm_stream vt1708_pcm_digital_playback = {
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -874,13 +857,6 @@ static int via_build_controls(struct hda_codec *codec)
 		if (err < 0)
 			return err;
 		spec->multiout.share_spdif = 1;
-
-		if (spec->extra_dig_out_nid) {
-			err = snd_hda_create_spdif_out_ctls(codec,
-						    spec->extra_dig_out_nid);
-			if (err < 0)
-				return err;
-		}
 	}
 	if (spec->dig_in_nid) {
 		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
@@ -1013,10 +989,6 @@ static void via_unsol_event(struct hda_codec *codec,
 		via_gpio_control(codec);
 }
 
-static hda_nid_t slave_dig_outs[] = {
-	0,
-};
-
 static int via_init(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
@@ -1051,8 +1023,9 @@ static int via_init(struct hda_codec *codec)
 		snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0,
 				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN);
 
-	/* no slave outs */
-	codec->slave_dig_outs = slave_dig_outs;
+	/* assign slave outs */
+	if (spec->slave_dig_outs[0])
+		codec->slave_dig_outs = spec->slave_dig_outs;
 
  	return 0;
 }
@@ -2134,7 +2107,8 @@ static struct hda_pcm_stream vt1708B_pcm_digital_playback = {
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -2589,14 +2563,15 @@ static struct hda_pcm_stream vt1708S_pcm_analog_capture = {
 };
 
 static struct hda_pcm_stream vt1708S_pcm_digital_playback = {
-	.substreams = 2,
+	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
 	/* NID is set in via_build_pcms */
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -2805,14 +2780,37 @@ static int vt1708S_auto_create_analog_input_ctls(struct via_spec *spec,
 	return 0;
 }
 
+/* fill out digital output widgets; one for master and one for slave outputs */
+static void fill_dig_outs(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int i;
+
+	for (i = 0; i < spec->autocfg.dig_outs; i++) {
+		hda_nid_t nid;
+		int conn;
+
+		nid = spec->autocfg.dig_out_pins[i];
+		if (!nid)
+			continue;
+		conn = snd_hda_get_connections(codec, nid, &nid, 1);
+		if (conn < 1)
+			continue;
+		if (!spec->multiout.dig_out_nid)
+			spec->multiout.dig_out_nid = nid;
+		else {
+			spec->slave_dig_outs[0] = nid;
+			break; /* at most two dig outs */
+		}
+	}
+}
+
 static int vt1708S_parse_auto_config(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
 	int err;
-	static hda_nid_t vt1708s_ignore[] = {0x21, 0};
 
-	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
-					   vt1708s_ignore);
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
 	if (err < 0)
 		return err;
 	err = vt1708S_auto_fill_dac_nids(spec, &spec->autocfg);
@@ -2833,10 +2831,7 @@ static int vt1708S_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID;
-
-	spec->extra_dig_out_nid = 0x15;
+	fill_dig_outs(codec);
 
 	if (spec->kctls.list)
 		spec->mixers[spec->num_mixers++] = spec->kctls.list;
@@ -3000,7 +2995,8 @@ static struct hda_pcm_stream vt1702_pcm_digital_playback = {
 	.ops = {
 		.open = via_dig_playback_pcm_open,
 		.close = via_dig_playback_pcm_close,
-		.prepare = via_dig_playback_pcm_prepare
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
 	},
 };
 
@@ -3128,10 +3124,8 @@ static int vt1702_parse_auto_config(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
 	int err;
-	static hda_nid_t vt1702_ignore[] = {0x1C, 0};
 
-	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
-					   vt1702_ignore);
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
 	if (err < 0)
 		return err;
 	err = vt1702_auto_fill_dac_nids(spec, &spec->autocfg);
@@ -3152,10 +3146,7 @@ static int vt1702_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = VT1702_DIGOUT_NID;
-
-	spec->extra_dig_out_nid = 0x1B;
+	fill_dig_outs(codec);
 
 	if (spec->kctls.list)
 		spec->mixers[spec->num_mixers++] = spec->kctls.list;
diff --git a/sound/pci/ice1712/Makefile b/sound/pci/ice1712/Makefile
index f99fe089495..536eae2ccf9 100644
--- a/sound/pci/ice1712/Makefile
+++ b/sound/pci/ice1712/Makefile
@@ -5,7 +5,7 @@
 
 snd-ice17xx-ak4xxx-objs := ak4xxx.o
 snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o
-snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o
+snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index fdae6deba16..adc909ec125 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -335,6 +335,7 @@ struct snd_ice1712 {
 	unsigned int force_rdma1:1;	/* VT1720/4 - RDMA1 as non-spdif */
 	unsigned int midi_output:1;	/* VT1720/4: MIDI output triggered */
 	unsigned int midi_input:1;	/* VT1720/4: MIDI input triggered */
+	unsigned int own_routing:1;	/* VT1720/4: use own routing ctls */
 	unsigned int num_total_dacs;	/* total DACs */
 	unsigned int num_total_adcs;	/* total ADCs */
 	unsigned int cur_rate;		/* current rate */
@@ -458,10 +459,17 @@ static inline int snd_ice1712_gpio_read_bits(struct snd_ice1712 *ice,
 	return  snd_ice1712_gpio_read(ice) & mask;
 }
 
+/* route access functions */
+int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift);
+int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
+								int shift);
+
 int snd_ice1712_spdif_build_controls(struct snd_ice1712 *ice);
 
-int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak, const struct snd_akm4xxx *template,
-			     const struct snd_ak4xxx_private *priv, struct snd_ice1712 *ice);
+int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak,
+			     const struct snd_akm4xxx *template,
+			     const struct snd_ak4xxx_private *priv,
+			     struct snd_ice1712 *ice);
 void snd_ice1712_akm4xxx_free(struct snd_ice1712 *ice);
 int snd_ice1712_akm4xxx_build_controls(struct snd_ice1712 *ice);
 
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 128510e77a7..36ade77cf37 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -49,6 +49,7 @@
 #include "prodigy192.h"
 #include "prodigy_hifi.h"
 #include "juli.h"
+#include "maya44.h"
 #include "phase.h"
 #include "wtm.h"
 #include "se.h"
@@ -65,6 +66,7 @@ MODULE_SUPPORTED_DEVICE("{"
 	       PRODIGY192_DEVICE_DESC
 	       PRODIGY_HIFI_DEVICE_DESC
 	       JULI_DEVICE_DESC
+	       MAYA44_DEVICE_DESC
 	       PHASE_DEVICE_DESC
 	       WTM_DEVICE_DESC
 	       SE_DEVICE_DESC
@@ -626,7 +628,7 @@ static unsigned char stdclock_set_mclk(struct snd_ice1712 *ice,
 	return 0;
 }
 
-static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
+static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 				    int force)
 {
 	unsigned long flags;
@@ -634,17 +636,18 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 	unsigned int i, old_rate;
 
 	if (rate > ice->hw_rates->list[ice->hw_rates->count - 1])
-		return;
+		return -EINVAL;
+
 	spin_lock_irqsave(&ice->reg_lock, flags);
 	if ((inb(ICEMT1724(ice, DMA_CONTROL)) & DMA_STARTS) ||
 	    (inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
 		/* running? we cannot change the rate now... */
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return -EBUSY;
 	}
 	if (!force && is_pro_rate_locked(ice)) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return (rate == ice->cur_rate) ? 0 : -EBUSY;
 	}
 
 	old_rate = ice->get_rate(ice);
@@ -652,7 +655,7 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 		ice->set_rate(ice, rate);
 	else if (rate == ice->cur_rate) {
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return;
+		return 0;
 	}
 
 	ice->cur_rate = rate;
@@ -674,13 +677,15 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
 	}
 	if (ice->spdif.ops.setup_rate)
 		ice->spdif.ops.setup_rate(ice, rate);
+
+	return 0;
 }
 
 static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *hw_params)
 {
 	struct snd_ice1712 *ice = snd_pcm_substream_chip(substream);
-	int i, chs;
+	int i, chs, err;
 
 	chs = params_channels(hw_params);
 	mutex_lock(&ice->open_mutex);
@@ -715,7 +720,11 @@ static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 	mutex_unlock(&ice->open_mutex);
-	snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
+
+	err = snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
+	if (err < 0)
+		return err;
+
 	return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
 }
 
@@ -848,20 +857,39 @@ static snd_pcm_uframes_t snd_vt1724_pcm_pointer(struct snd_pcm_substream *substr
 #endif
 }
 
-static const struct vt1724_pcm_reg vt1724_playback_pro_reg = {
+static const struct vt1724_pcm_reg vt1724_pdma0_reg = {
 	.addr = VT1724_MT_PLAYBACK_ADDR,
 	.size = VT1724_MT_PLAYBACK_SIZE,
 	.count = VT1724_MT_PLAYBACK_COUNT,
 	.start = VT1724_PDMA0_START,
 };
 
-static const struct vt1724_pcm_reg vt1724_capture_pro_reg = {
+static const struct vt1724_pcm_reg vt1724_pdma4_reg = {
+	.addr = VT1724_MT_PDMA4_ADDR,
+	.size = VT1724_MT_PDMA4_SIZE,
+	.count = VT1724_MT_PDMA4_COUNT,
+	.start = VT1724_PDMA4_START,
+};
+
+static const struct vt1724_pcm_reg vt1724_rdma0_reg = {
 	.addr = VT1724_MT_CAPTURE_ADDR,
 	.size = VT1724_MT_CAPTURE_SIZE,
 	.count = VT1724_MT_CAPTURE_COUNT,
 	.start = VT1724_RDMA0_START,
 };
 
+static const struct vt1724_pcm_reg vt1724_rdma1_reg = {
+	.addr = VT1724_MT_RDMA1_ADDR,
+	.size = VT1724_MT_RDMA1_SIZE,
+	.count = VT1724_MT_RDMA1_COUNT,
+	.start = VT1724_RDMA1_START,
+};
+
+#define vt1724_playback_pro_reg vt1724_pdma0_reg
+#define vt1724_playback_spdif_reg vt1724_pdma4_reg
+#define vt1724_capture_pro_reg vt1724_rdma0_reg
+#define vt1724_capture_spdif_reg vt1724_rdma1_reg
+
 static const struct snd_pcm_hardware snd_vt1724_playback_pro = {
 	.info =			(SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 				 SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -1077,20 +1105,6 @@ static int __devinit snd_vt1724_pcm_profi(struct snd_ice1712 *ice, int device)
  * SPDIF PCM
  */
 
-static const struct vt1724_pcm_reg vt1724_playback_spdif_reg = {
-	.addr = VT1724_MT_PDMA4_ADDR,
-	.size = VT1724_MT_PDMA4_SIZE,
-	.count = VT1724_MT_PDMA4_COUNT,
-	.start = VT1724_PDMA4_START,
-};
-
-static const struct vt1724_pcm_reg vt1724_capture_spdif_reg = {
-	.addr = VT1724_MT_RDMA1_ADDR,
-	.size = VT1724_MT_RDMA1_SIZE,
-	.count = VT1724_MT_RDMA1_COUNT,
-	.start = VT1724_RDMA1_START,
-};
-
 /* update spdif control bits; call with reg_lock */
 static void update_spdif_bits(struct snd_ice1712 *ice, unsigned int val)
 {
@@ -1963,7 +1977,7 @@ static inline int digital_route_shift(int idx)
 	return idx * 3;
 }
 
-static int get_route_val(struct snd_ice1712 *ice, int shift)
+int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift)
 {
 	unsigned long val;
 	unsigned char eitem;
@@ -1982,7 +1996,8 @@ static int get_route_val(struct snd_ice1712 *ice, int shift)
 	return eitem;
 }
 
-static int put_route_val(struct snd_ice1712 *ice, unsigned int val, int shift)
+int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
+								int shift)
 {
 	unsigned int old_val, nval;
 	int change;
@@ -2010,7 +2025,7 @@ static int snd_vt1724_pro_route_analog_get(struct snd_kcontrol *kcontrol,
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	ucontrol->value.enumerated.item[0] =
-		get_route_val(ice, analog_route_shift(idx));
+		snd_ice1724_get_route_val(ice, analog_route_shift(idx));
 	return 0;
 }
 
@@ -2019,8 +2034,9 @@ static int snd_vt1724_pro_route_analog_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	return put_route_val(ice, ucontrol->value.enumerated.item[0],
-			     analog_route_shift(idx));
+	return snd_ice1724_put_route_val(ice,
+					 ucontrol->value.enumerated.item[0],
+					 analog_route_shift(idx));
 }
 
 static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
@@ -2029,7 +2045,7 @@ static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	ucontrol->value.enumerated.item[0] =
-		get_route_val(ice, digital_route_shift(idx));
+		snd_ice1724_get_route_val(ice, digital_route_shift(idx));
 	return 0;
 }
 
@@ -2038,11 +2054,13 @@ static int snd_vt1724_pro_route_spdif_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-	return put_route_val(ice, ucontrol->value.enumerated.item[0],
-			     digital_route_shift(idx));
+	return snd_ice1724_put_route_val(ice,
+					 ucontrol->value.enumerated.item[0],
+					 digital_route_shift(idx));
 }
 
-static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata =
+{
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "H/W Playback Route",
 	.info = snd_vt1724_pro_route_info,
@@ -2109,6 +2127,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = {
 	snd_vt1724_prodigy_hifi_cards,
 	snd_vt1724_prodigy192_cards,
 	snd_vt1724_juli_cards,
+	snd_vt1724_maya44_cards,
 	snd_vt1724_phase_cards,
 	snd_vt1724_wtm_cards,
 	snd_vt1724_se_cards,
@@ -2246,8 +2265,10 @@ static int __devinit snd_vt1724_read_eeprom(struct snd_ice1712 *ice,
 static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice)
 {
 	outb(VT1724_RESET , ICEREG1724(ice, CONTROL));
+	inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
 	msleep(10);
 	outb(0, ICEREG1724(ice, CONTROL));
+	inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
 	msleep(10);
 }
 
@@ -2277,9 +2298,12 @@ static int __devinit snd_vt1724_spdif_build_controls(struct snd_ice1712 *ice)
 	if (snd_BUG_ON(!ice->pcm))
 		return -EIO;
 
-	err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
-	if (err < 0)
-		return err;
+	if (!ice->own_routing) {
+		err = snd_ctl_add(ice->card,
+			snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
+		if (err < 0)
+			return err;
+	}
 
 	err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_spdif_switch, ice));
 	if (err < 0)
@@ -2326,7 +2350,7 @@ static int __devinit snd_vt1724_build_controls(struct snd_ice1712 *ice)
 	if (err < 0)
 		return err;
 
-	if (ice->num_total_dacs > 0) {
+	if (!ice->own_routing && ice->num_total_dacs > 0) {
 		struct snd_kcontrol_new tmp = snd_vt1724_mixer_pro_analog_route;
 		tmp.count = ice->num_total_dacs;
 		if (ice->vt1720 && tmp.count > 2)
diff --git a/sound/pci/ice1712/maya44.c b/sound/pci/ice1712/maya44.c
new file mode 100644
index 00000000000..3e1c20ae2f1
--- /dev/null
+++ b/sound/pci/ice1712/maya44.c
@@ -0,0 +1,779 @@
+/*
+ *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ *   Lowlevel functions for ESI Maya44 cards
+ *
+ *	Copyright (c) 2009 Takashi Iwai <tiwai@suse.de>
+ *	Based on the patches by Rainer Zimmermann <mail@lightshed.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/tlv.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "maya44.h"
+
+/* WM8776 register indexes */
+#define WM8776_REG_HEADPHONE_L		0x00
+#define WM8776_REG_HEADPHONE_R		0x01
+#define WM8776_REG_HEADPHONE_MASTER	0x02
+#define WM8776_REG_DAC_ATTEN_L		0x03
+#define WM8776_REG_DAC_ATTEN_R		0x04
+#define WM8776_REG_DAC_ATTEN_MASTER	0x05
+#define WM8776_REG_DAC_PHASE		0x06
+#define WM8776_REG_DAC_CONTROL		0x07
+#define WM8776_REG_DAC_MUTE		0x08
+#define WM8776_REG_DAC_DEEMPH		0x09
+#define WM8776_REG_DAC_IF_CONTROL	0x0a
+#define WM8776_REG_ADC_IF_CONTROL	0x0b
+#define WM8776_REG_MASTER_MODE_CONTROL	0x0c
+#define WM8776_REG_POWERDOWN		0x0d
+#define WM8776_REG_ADC_ATTEN_L		0x0e
+#define WM8776_REG_ADC_ATTEN_R		0x0f
+#define WM8776_REG_ADC_ALC1		0x10
+#define WM8776_REG_ADC_ALC2		0x11
+#define WM8776_REG_ADC_ALC3		0x12
+#define WM8776_REG_ADC_NOISE_GATE	0x13
+#define WM8776_REG_ADC_LIMITER		0x14
+#define WM8776_REG_ADC_MUX		0x15
+#define WM8776_REG_OUTPUT_MUX		0x16
+#define WM8776_REG_RESET		0x17
+
+#define WM8776_NUM_REGS			0x18
+
+/* clock ratio identifiers for snd_wm8776_set_rate() */
+#define WM8776_CLOCK_RATIO_128FS	0
+#define WM8776_CLOCK_RATIO_192FS	1
+#define WM8776_CLOCK_RATIO_256FS	2
+#define WM8776_CLOCK_RATIO_384FS	3
+#define WM8776_CLOCK_RATIO_512FS	4
+#define WM8776_CLOCK_RATIO_768FS	5
+
+enum { WM_VOL_HP, WM_VOL_DAC, WM_VOL_ADC, WM_NUM_VOLS };
+enum { WM_SW_DAC, WM_SW_BYPASS, WM_NUM_SWITCHES };
+
+struct snd_wm8776 {
+	unsigned char addr;
+	unsigned short regs[WM8776_NUM_REGS];
+	unsigned char volumes[WM_NUM_VOLS][2];
+	unsigned int switch_bits;
+};
+
+struct snd_maya44 {
+	struct snd_ice1712 *ice;
+	struct snd_wm8776 wm[2];
+	struct mutex mutex;
+};
+
+
+/* write the given register and save the data to the cache */
+static void wm8776_write(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
+			 unsigned char reg, unsigned short val)
+{
+	/*
+	 * WM8776 registers are up to 9 bits wide, bit 8 is placed in the LSB
+	 * of the address field
+	 */
+	snd_vt1724_write_i2c(ice, wm->addr,
+			     (reg << 1) | ((val >> 8) & 1),
+			     val & 0xff);
+	wm->regs[reg] = val;
+}
+
+/*
+ * update the given register with and/or mask and save the data to the cache
+ */
+static int wm8776_write_bits(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
+			     unsigned char reg,
+			     unsigned short mask, unsigned short val)
+{
+	val |= wm->regs[reg] & ~mask;
+	if (val != wm->regs[reg]) {
+		wm8776_write(ice, wm, reg, val);
+		return 1;
+	}
+	return 0;
+}
+
+
+/*
+ * WM8776 volume controls
+ */
+
+struct maya_vol_info {
+	unsigned int maxval;		/* volume range: 0..maxval */
+	unsigned char regs[2];		/* left and right registers */
+	unsigned short mask;		/* value mask */
+	unsigned short offset;		/* zero-value offset */
+	unsigned short mute;		/* mute bit */
+	unsigned short update;		/* update bits */
+	unsigned char mux_bits[2];	/* extra bits for ADC mute */
+};
+
+static struct maya_vol_info vol_info[WM_NUM_VOLS] = {
+	[WM_VOL_HP] = {
+		.maxval = 80,
+		.regs = { WM8776_REG_HEADPHONE_L, WM8776_REG_HEADPHONE_R },
+		.mask = 0x7f,
+		.offset = 0x30,
+		.mute = 0x00,
+		.update = 0x180,	/* update and zero-cross enable */
+	},
+	[WM_VOL_DAC] = {
+		.maxval = 255,
+		.regs = { WM8776_REG_DAC_ATTEN_L, WM8776_REG_DAC_ATTEN_R },
+		.mask = 0xff,
+		.offset = 0x01,
+		.mute = 0x00,
+		.update = 0x100,	/* zero-cross enable */
+	},
+	[WM_VOL_ADC] = {
+		.maxval = 91,
+		.regs = { WM8776_REG_ADC_ATTEN_L, WM8776_REG_ADC_ATTEN_R },
+		.mask = 0xff,
+		.offset = 0xa5,
+		.mute = 0xa5,
+		.update = 0x100,	/* update */
+		.mux_bits = { 0x80, 0x40 }, /* ADCMUX bits */
+	},
+};
+
+/*
+ * dB tables
+ */
+/* headphone output: mute, -73..+6db (1db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_hp, -7400, 100, 1);
+/* DAC output: mute, -127..0db (0.5db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_dac, -12750, 50, 1);
+/* ADC gain: mute, -21..+24db (0.5db step) */
+static const DECLARE_TLV_DB_SCALE(db_scale_adc, -2100, 50, 1);
+
+static int maya_vol_info(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_info *uinfo)
+{
+	unsigned int idx = kcontrol->private_value;
+	struct maya_vol_info *vol = &vol_info[idx];
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = vol->maxval;
+	return 0;
+}
+
+static int maya_vol_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = kcontrol->private_value;
+
+	mutex_lock(&chip->mutex);
+	ucontrol->value.integer.value[0] = wm->volumes[idx][0];
+	ucontrol->value.integer.value[1] = wm->volumes[idx][1];
+	mutex_unlock(&chip->mutex);
+	return 0;
+}
+
+static int maya_vol_put(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = kcontrol->private_value;
+	struct maya_vol_info *vol = &vol_info[idx];
+	unsigned int val, data;
+	int ch, changed = 0;
+
+	mutex_lock(&chip->mutex);
+	for (ch = 0; ch < 2; ch++) {
+		val = ucontrol->value.integer.value[ch];
+		if (val > vol->maxval)
+			val = vol->maxval;
+		if (val == wm->volumes[idx][ch])
+			continue;
+		if (!val)
+			data = vol->mute;
+		else
+			data = (val - 1) + vol->offset;
+		data |= vol->update;
+		changed |= wm8776_write_bits(chip->ice, wm, vol->regs[ch],
+					     vol->mask | vol->update, data);
+		if (vol->mux_bits[ch])
+			wm8776_write_bits(chip->ice, wm, WM8776_REG_ADC_MUX,
+					  vol->mux_bits[ch],
+					  val ? 0 : vol->mux_bits[ch]);
+		wm->volumes[idx][ch] = val;
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * WM8776 switch controls
+ */
+
+#define COMPOSE_SW_VAL(idx, reg, mask)	((idx) | ((reg) << 8) | ((mask) << 16))
+#define GET_SW_VAL_IDX(val)	((val) & 0xff)
+#define GET_SW_VAL_REG(val)	(((val) >> 8) & 0xff)
+#define GET_SW_VAL_MASK(val)	(((val) >> 16) & 0xff)
+
+#define maya_sw_info	snd_ctl_boolean_mono_info
+
+static int maya_sw_get(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
+
+	ucontrol->value.integer.value[0] = (wm->switch_bits >> idx) & 1;
+	return 0;
+}
+
+static int maya_sw_put(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	struct snd_wm8776 *wm =
+		&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
+	unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
+	unsigned int mask, val;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	mask = 1 << idx;
+	wm->switch_bits &= ~mask;
+	val = ucontrol->value.integer.value[0];
+	if (val)
+		wm->switch_bits |= mask;
+	mask = GET_SW_VAL_MASK(kcontrol->private_value);
+	changed = wm8776_write_bits(chip->ice, wm,
+				    GET_SW_VAL_REG(kcontrol->private_value),
+				    mask, val ? mask : 0);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * GPIO pins (known ones for maya44)
+ */
+#define GPIO_PHANTOM_OFF	2
+#define GPIO_MIC_RELAY		4
+#define GPIO_SPDIF_IN_INV	5
+#define GPIO_MUST_BE_0		7
+
+/*
+ * GPIO switch controls
+ */
+
+#define COMPOSE_GPIO_VAL(shift, inv)	((shift) | ((inv) << 8))
+#define GET_GPIO_VAL_SHIFT(val)		((val) & 0xff)
+#define GET_GPIO_VAL_INV(val)		(((val) >> 8) & 1)
+
+static int maya_set_gpio_bits(struct snd_ice1712 *ice, unsigned int mask,
+			      unsigned int bits)
+{
+	unsigned int data;
+	data = snd_ice1712_gpio_read(ice);
+	if ((data & mask) == bits)
+		return 0;
+	snd_ice1712_gpio_write(ice, (data & ~mask) | bits);
+	return 1;
+}
+
+#define maya_gpio_sw_info	snd_ctl_boolean_mono_info
+
+static int maya_gpio_sw_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
+	unsigned int val;
+
+	val = (snd_ice1712_gpio_read(chip->ice) >> shift) & 1;
+	if (GET_GPIO_VAL_INV(kcontrol->private_value))
+		val = !val;
+	ucontrol->value.integer.value[0] = val;
+	return 0;
+}
+
+static int maya_gpio_sw_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
+	unsigned int val, mask;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	mask = 1 << shift;
+	val = ucontrol->value.integer.value[0];
+	if (GET_GPIO_VAL_INV(kcontrol->private_value))
+		val = !val;
+	val = val ? mask : 0;
+	changed = maya_set_gpio_bits(chip->ice, mask, val);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * capture source selection
+ */
+
+/* known working input slots (0-4) */
+#define MAYA_LINE_IN	1	/* in-2 */
+#define MAYA_MIC_IN	4	/* in-5 */
+
+static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line)
+{
+	wm8776_write_bits(chip->ice, &chip->wm[idx], WM8776_REG_ADC_MUX,
+			  0x1f, 1 << line);
+}
+
+static int maya_rec_src_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = { "Line", "Mic" };
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+	       texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int maya_rec_src_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int sel;
+
+	if (snd_ice1712_gpio_read(chip->ice) & (1 << GPIO_MIC_RELAY))
+		sel = 1;
+	else
+		sel = 0;
+	ucontrol->value.enumerated.item[0] = sel;
+	return 0;
+}
+
+static int maya_rec_src_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int sel = ucontrol->value.enumerated.item[0];
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	changed = maya_set_gpio_bits(chip->ice, GPIO_MIC_RELAY,
+				     sel ? GPIO_MIC_RELAY : 0);
+	wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+/*
+ * Maya44 routing switch settings have different meanings than the standard
+ * ice1724 switches as defined in snd_vt1724_pro_route_info (ice1724.c).
+ */
+static int maya_pb_route_info(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = {
+		"PCM Out", /* 0 */
+		"Input 1", "Input 2", "Input 3", "Input 4"
+	};
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+	       texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int maya_pb_route_shift(int idx)
+{
+	static const unsigned char shift[10] =
+		{ 8, 20, 0, 3, 11, 23, 14, 26, 17, 29 };
+	return shift[idx % 10];
+}
+
+static int maya_pb_route_get(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+	ucontrol->value.enumerated.item[0] =
+		snd_ice1724_get_route_val(chip->ice, maya_pb_route_shift(idx));
+	return 0;
+}
+
+static int maya_pb_route_put(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
+	int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+	return snd_ice1724_put_route_val(chip->ice,
+					 ucontrol->value.enumerated.item[0],
+					 maya_pb_route_shift(idx));
+}
+
+
+/*
+ * controls to be added
+ */
+
+static struct snd_kcontrol_new maya_controls[] __devinitdata = {
+	{
+		.name = "Crossmix Playback Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_hp },
+		.private_value = WM_VOL_HP,
+		.count = 2,
+	},
+	{
+		.name = "PCM Playback Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_dac },
+		.private_value = WM_VOL_DAC,
+		.count = 2,
+	},
+	{
+		.name = "Line Capture Volume",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+		.info = maya_vol_info,
+		.get = maya_vol_get,
+		.put = maya_vol_put,
+		.tlv = { .p = db_scale_adc },
+		.private_value = WM_VOL_ADC,
+		.count = 2,
+	},
+	{
+		.name = "PCM Playback Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_sw_info,
+		.get = maya_sw_get,
+		.put = maya_sw_put,
+		.private_value = COMPOSE_SW_VAL(WM_SW_DAC,
+						WM8776_REG_OUTPUT_MUX, 0x01),
+		.count = 2,
+	},
+	{
+		.name = "Bypass Playback Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_sw_info,
+		.get = maya_sw_get,
+		.put = maya_sw_put,
+		.private_value = COMPOSE_SW_VAL(WM_SW_BYPASS,
+						WM8776_REG_OUTPUT_MUX, 0x04),
+		.count = 2,
+	},
+	{
+		.name = "Capture Source",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_rec_src_info,
+		.get = maya_rec_src_get,
+		.put = maya_rec_src_put,
+	},
+	{
+		.name = "Mic Phantom Power Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_gpio_sw_info,
+		.get = maya_gpio_sw_get,
+		.put = maya_gpio_sw_put,
+		.private_value = COMPOSE_GPIO_VAL(GPIO_PHANTOM_OFF, 1),
+	},
+	{
+		.name = "SPDIF Capture Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.info = maya_gpio_sw_info,
+		.get = maya_gpio_sw_get,
+		.put = maya_gpio_sw_put,
+		.private_value = COMPOSE_GPIO_VAL(GPIO_SPDIF_IN_INV, 1),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "H/W Playback Route",
+		.info = maya_pb_route_info,
+		.get = maya_pb_route_get,
+		.put = maya_pb_route_put,
+		.count = 4,  /* FIXME: do controls 5-9 have any meaning? */
+	},
+};
+
+static int __devinit maya44_add_controls(struct snd_ice1712 *ice)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(maya_controls); i++) {
+		err = snd_ctl_add(ice->card, snd_ctl_new1(&maya_controls[i],
+							  ice->spec));
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+
+
+/*
+ * initialize a wm8776 chip
+ */
+static void __devinit wm8776_init(struct snd_ice1712 *ice,
+				  struct snd_wm8776 *wm, unsigned int addr)
+{
+	static const unsigned short inits_wm8776[] = {
+		0x02, 0x100, /* R2: headphone L+R muted + update */
+		0x05, 0x100, /* R5: DAC output L+R muted + update */
+		0x06, 0x000, /* R6: DAC output phase normal */
+		0x07, 0x091, /* R7: DAC enable zero cross detection,
+				normal output */
+		0x08, 0x000, /* R8: DAC soft mute off */
+		0x09, 0x000, /* R9: no deemph, DAC zero detect disabled */
+		0x0a, 0x022, /* R10: DAC I2C mode, std polarities, 24bit */
+		0x0b, 0x022, /* R11: ADC I2C mode, std polarities, 24bit,
+				highpass filter enabled */
+		0x0c, 0x042, /* R12: ADC+DAC slave, ADC+DAC 44,1kHz */
+		0x0d, 0x000, /* R13: all power up */
+		0x0e, 0x100, /* R14: ADC left muted,
+				enable zero cross detection */
+		0x0f, 0x100, /* R15: ADC right muted,
+				enable zero cross detection */
+			     /* R16: ALC...*/
+		0x11, 0x000, /* R17: disable ALC */
+			     /* R18: ALC...*/
+			     /* R19: noise gate...*/
+		0x15, 0x000, /* R21: ADC input mux init, mute all inputs */
+		0x16, 0x001, /* R22: output mux, select DAC */
+		0xff, 0xff
+	};
+
+	const unsigned short *ptr;
+	unsigned char reg;
+	unsigned short data;
+
+	wm->addr = addr;
+	/* enable DAC output; mute bypass, aux & all inputs */
+	wm->switch_bits = (1 << WM_SW_DAC);
+
+	ptr = inits_wm8776;
+	while (*ptr != 0xff) {
+		reg = *ptr++;
+		data = *ptr++;
+		wm8776_write(ice, wm, reg, data);
+	}
+}
+
+
+/*
+ * change the rate on the WM8776 codecs.
+ * this assumes that the VT17xx's rate is changed by the calling function.
+ * NOTE: even though the WM8776's are running in slave mode and rate
+ * selection is automatic, we need to call snd_wm8776_set_rate() here
+ * to make sure some flags are set correctly.
+ */
+static void set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+	struct snd_maya44 *chip = ice->spec;
+	unsigned int ratio, adc_ratio, val;
+	int i;
+
+	switch (rate) {
+	case 192000:
+		ratio = WM8776_CLOCK_RATIO_128FS;
+		break;
+	case 176400:
+		ratio = WM8776_CLOCK_RATIO_128FS;
+		break;
+	case 96000:
+		ratio = WM8776_CLOCK_RATIO_256FS;
+		break;
+	case 88200:
+		ratio = WM8776_CLOCK_RATIO_384FS;
+		break;
+	case 48000:
+		ratio = WM8776_CLOCK_RATIO_512FS;
+		break;
+	case 44100:
+		ratio = WM8776_CLOCK_RATIO_512FS;
+		break;
+	case 32000:
+		ratio = WM8776_CLOCK_RATIO_768FS;
+		break;
+	case 0:
+		/* no hint - S/PDIF input is master, simply return */
+		return;
+	default:
+		snd_BUG();
+		return;
+	}
+
+	/*
+	 * this currently sets the same rate for ADC and DAC, but limits
+	 * ADC rate to 256X (96kHz). For 256X mode (96kHz), this sets ADC
+	 * oversampling to 64x, as recommended by WM8776 datasheet.
+	 * Setting the rate is not really necessary in slave mode.
+	 */
+	adc_ratio = ratio;
+	if (adc_ratio < WM8776_CLOCK_RATIO_256FS)
+		adc_ratio = WM8776_CLOCK_RATIO_256FS;
+
+	val = adc_ratio;
+	if (adc_ratio == WM8776_CLOCK_RATIO_256FS)
+		val |= 8;
+	val |= ratio << 4;
+
+	mutex_lock(&chip->mutex);
+	for (i = 0; i < 2; i++)
+		wm8776_write_bits(ice, &chip->wm[i],
+				  WM8776_REG_MASTER_MODE_CONTROL,
+				  0x180, val);
+	mutex_unlock(&chip->mutex);
+}
+
+/*
+ * supported sample rates (to override the default one)
+ */
+
+static unsigned int rates[] = {
+	32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000
+};
+
+/* playback rates: 32..192 kHz */
+static struct snd_pcm_hw_constraint_list dac_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list = rates,
+	.mask = 0
+};
+
+
+/*
+ * chip addresses on I2C bus
+ */
+static unsigned char wm8776_addr[2] __devinitdata = {
+	0x34, 0x36, /* codec 0 & 1 */
+};
+
+/*
+ * initialize the chip
+ */
+static int __devinit maya44_init(struct snd_ice1712 *ice)
+{
+	int i;
+	struct snd_maya44 *chip;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	mutex_init(&chip->mutex);
+	chip->ice = ice;
+	ice->spec = chip;
+
+	/* initialise codecs */
+	ice->num_total_dacs = 4;
+	ice->num_total_adcs = 4;
+	ice->akm_codecs = 0;
+
+	for (i = 0; i < 2; i++) {
+		wm8776_init(ice, &chip->wm[i], wm8776_addr[i]);
+		wm8776_select_input(chip, i, MAYA_LINE_IN);
+	}
+
+	/* set card specific rates */
+	ice->hw_rates = &dac_rates;
+
+	/* register change rate notifier */
+	ice->gpio.set_pro_rate = set_rate;
+
+	/* RDMA1 (2nd input channel) is used for ADC by default */
+	ice->force_rdma1 = 1;
+
+	/* have an own routing control */
+	ice->own_routing = 1;
+
+	return 0;
+}
+
+
+/*
+ * Maya44 boards don't provide the EEPROM data except for the vendor IDs.
+ * hence the driver needs to sets up it properly.
+ */
+
+static unsigned char maya44_eeprom[] __devinitdata = {
+	[ICE_EEP2_SYSCONF]     = 0x45,
+		/* clock xin1=49.152MHz, mpu401, 2 stereo ADCs+DACs */
+	[ICE_EEP2_ACLINK]      = 0x80,
+		/* I2S */
+	[ICE_EEP2_I2S]         = 0xf8,
+		/* vol, 96k, 24bit, 192k */
+	[ICE_EEP2_SPDIF]       = 0xc3,
+		/* enable spdif out, spdif out supp, spdif-in, ext spdif out */
+	[ICE_EEP2_GPIO_DIR]    = 0xff,
+	[ICE_EEP2_GPIO_DIR1]   = 0xff,
+	[ICE_EEP2_GPIO_DIR2]   = 0xff,
+	[ICE_EEP2_GPIO_MASK]   = 0/*0x9f*/,
+	[ICE_EEP2_GPIO_MASK1]  = 0/*0xff*/,
+	[ICE_EEP2_GPIO_MASK2]  = 0/*0x7f*/,
+	[ICE_EEP2_GPIO_STATE]  = (1 << GPIO_PHANTOM_OFF) |
+			(1 << GPIO_SPDIF_IN_INV),
+	[ICE_EEP2_GPIO_STATE1] = 0x00,
+	[ICE_EEP2_GPIO_STATE2] = 0x00,
+};
+
+/* entry point */
+struct snd_ice1712_card_info snd_vt1724_maya44_cards[] __devinitdata = {
+	{
+		.subvendor = VT1724_SUBDEVICE_MAYA44,
+		.name = "ESI Maya44",
+		.model = "maya44",
+		.chip_init = maya44_init,
+		.build_controls = maya44_add_controls,
+		.eeprom_size = sizeof(maya44_eeprom),
+		.eeprom_data = maya44_eeprom,
+	},
+	{ } /* terminator */
+};
diff --git a/sound/pci/ice1712/maya44.h b/sound/pci/ice1712/maya44.h
new file mode 100644
index 00000000000..eafd03a8f4b
--- /dev/null
+++ b/sound/pci/ice1712/maya44.h
@@ -0,0 +1,10 @@
+#ifndef __SOUND_MAYA44_H
+#define __SOUND_MAYA44_H
+
+#define MAYA44_DEVICE_DESC		"{ESI,Maya44},"
+
+#define VT1724_SUBDEVICE_MAYA44		0x34315441	/* Maya44 */
+
+extern struct snd_ice1712_card_info  snd_vt1724_maya44_cards[];
+
+#endif	/* __SOUND_MAYA44_H */
diff --git a/sound/pci/lx6464es/Makefile b/sound/pci/lx6464es/Makefile
new file mode 100644
index 00000000000..eb04a6c73d8
--- /dev/null
+++ b/sound/pci/lx6464es/Makefile
@@ -0,0 +1,2 @@
+snd-lx6464es-objs := lx6464es.o lx_core.o
+obj-$(CONFIG_SND_LX6464ES) += snd-lx6464es.o
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
new file mode 100644
index 00000000000..ccf1b38c88e
--- /dev/null
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -0,0 +1,1159 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ *
+ * Copyright (c) 2008, 2009 Tim Blechmann <tim@klingt.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <sound/initval.h>
+#include <sound/control.h>
+#include <sound/info.h>
+
+#include "lx6464es.h"
+
+MODULE_AUTHOR("Tim Blechmann");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("digigram lx6464es");
+MODULE_SUPPORTED_DEVICE("{digigram lx6464es{}}");
+
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Digigram LX6464ES interface.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for  Digigram LX6464ES interface.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable/disable specific Digigram LX6464ES soundcards.");
+
+static const char card_name[] = "LX6464ES";
+
+
+#define PCI_DEVICE_ID_PLX_LX6464ES		PCI_DEVICE_ID_PLX_9056
+
+static struct pci_device_id snd_lx6464es_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
+	  .subvendor = PCI_VENDOR_ID_DIGIGRAM,
+	  .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM
+	},			/* LX6464ES */
+	{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
+	  .subvendor = PCI_VENDOR_ID_DIGIGRAM,
+	  .subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM
+	},			/* LX6464ES-CAE */
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, snd_lx6464es_ids);
+
+
+
+/* PGO pour USERo dans le registre pci_0x06/loc_0xEC */
+#define CHIPSC_RESET_XILINX (1L<<16)
+
+
+/* alsa callbacks */
+static struct snd_pcm_hardware lx_caps = {
+	.info             = (SNDRV_PCM_INFO_MMAP |
+			     SNDRV_PCM_INFO_INTERLEAVED |
+			     SNDRV_PCM_INFO_MMAP_VALID |
+			     SNDRV_PCM_INFO_SYNC_START),
+	.formats	  = (SNDRV_PCM_FMTBIT_S16_LE |
+			     SNDRV_PCM_FMTBIT_S16_BE |
+			     SNDRV_PCM_FMTBIT_S24_3LE |
+			     SNDRV_PCM_FMTBIT_S24_3BE),
+	.rates            = (SNDRV_PCM_RATE_CONTINUOUS |
+			     SNDRV_PCM_RATE_8000_192000),
+	.rate_min         = 8000,
+	.rate_max         = 192000,
+	.channels_min     = 2,
+	.channels_max     = 64,
+	.buffer_bytes_max = 64*2*3*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER,
+	.period_bytes_min = (2*2*MICROBLAZE_IBL_MIN*2),
+	.period_bytes_max = (4*64*MICROBLAZE_IBL_MAX*MAX_STREAM_BUFFER),
+	.periods_min      = 2,
+	.periods_max      = MAX_STREAM_BUFFER,
+};
+
+static int lx_set_granularity(struct lx6464es *chip, u32 gran);
+
+
+static int lx_hardware_open(struct lx6464es *chip,
+			    struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int channels = runtime->channels;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_pcm_uframes_t period_size = runtime->period_size;
+
+	snd_printd(LXP "allocating pipe for %d channels\n", channels);
+	err = lx_pipe_allocate(chip, 0, is_capture, channels);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "allocating pipe failed\n");
+		return err;
+	}
+
+	err = lx_set_granularity(chip, period_size);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "setting granularity to %ld failed\n",
+			   period_size);
+		return err;
+	}
+
+	return 0;
+}
+
+static int lx_hardware_start(struct lx6464es *chip,
+			     struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "setting stream format\n");
+	err = lx_stream_set_format(chip, runtime, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "setting stream format failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "starting pipe\n");
+	err = lx_pipe_start(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "starting pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "waiting for pipe to start\n");
+	err = lx_pipe_wait_for_start(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "waiting for pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_hardware_stop(struct lx6464es *chip,
+			    struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "pausing pipe\n");
+	err = lx_pipe_pause(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "pausing pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "waiting for pipe to become idle\n");
+	err = lx_pipe_wait_for_idle(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "waiting for pipe failed\n");
+		return err;
+	}
+
+	snd_printd(LXP "stopping pipe\n");
+	err = lx_pipe_stop(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(LXP "stopping pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_hardware_close(struct lx6464es *chip,
+			     struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printd(LXP "releasing pipe\n");
+	err = lx_pipe_release(chip, 0, is_capture);
+	if (err < 0) {
+		snd_printk(LXP "releasing pipe failed\n");
+		return err;
+	}
+
+	return err;
+}
+
+
+static int lx_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err = 0;
+	int board_rate;
+
+	snd_printdd("->lx_pcm_open\n");
+	mutex_lock(&chip->setup_mutex);
+
+	/* copy the struct snd_pcm_hardware struct */
+	runtime->hw = lx_caps;
+
+#if 0
+	/* buffer-size should better be multiple of period-size */
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
+		goto exit;
+	}
+#endif
+
+	/* the clock rate cannot be changed */
+	board_rate = chip->board_sample_rate;
+	err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE,
+					   board_rate, board_rate);
+
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not constrain periods\n");
+		goto exit;
+	}
+
+	/* constrain period size */
+	err = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					   MICROBLAZE_IBL_MIN,
+					   MICROBLAZE_IBL_MAX);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP
+			   "could not constrain period size\n");
+		goto exit;
+	}
+
+	snd_pcm_hw_constraint_step(runtime, 0,
+				   SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 32);
+
+	snd_pcm_set_sync(substream);
+	err = 0;
+
+exit:
+	runtime->private_data = chip;
+
+	mutex_unlock(&chip->setup_mutex);
+	snd_printdd("<-lx_pcm_open, %d\n", err);
+	return err;
+}
+
+static int lx_pcm_close(struct snd_pcm_substream *substream)
+{
+	int err = 0;
+	snd_printdd("->lx_pcm_close\n");
+	return err;
+}
+
+static snd_pcm_uframes_t lx_pcm_stream_pointer(struct snd_pcm_substream
+					       *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	snd_pcm_uframes_t pos;
+	unsigned long flags;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	struct lx_stream *lx_stream = is_capture ? &chip->capture_stream :
+		&chip->playback_stream;
+
+	snd_printdd("->lx_pcm_stream_pointer\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+	pos = lx_stream->frame_pos * substream->runtime->period_size;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	snd_printdd(LXP "stream_pointer at %ld\n", pos);
+	return pos;
+}
+
+static int lx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+	const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printdd("->lx_pcm_prepare\n");
+
+	mutex_lock(&chip->setup_mutex);
+
+	if (chip->hardware_running[is_capture]) {
+		err = lx_hardware_stop(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to stop hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		err = lx_hardware_close(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to close hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+	}
+
+	snd_printd(LXP "opening hardware\n");
+	err = lx_hardware_open(chip, substream);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "failed to open hardware. "
+			   "Error code %d\n", err);
+		goto exit;
+	}
+
+	err = lx_hardware_start(chip, substream);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "failed to start hardware. "
+			   "Error code %d\n", err);
+		goto exit;
+	}
+
+	chip->hardware_running[is_capture] = 1;
+
+	if (chip->board_sample_rate != substream->runtime->rate) {
+		if (!err)
+			chip->board_sample_rate = substream->runtime->rate;
+	}
+
+exit:
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static int lx_pcm_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *hw_params, int is_capture)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+
+	snd_printdd("->lx_pcm_hw_params\n");
+
+	mutex_lock(&chip->setup_mutex);
+
+	/* set dma buffer */
+	err = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+
+	if (is_capture)
+		chip->capture_stream.stream = substream;
+	else
+		chip->playback_stream.stream = substream;
+
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static int lx_pcm_hw_params_playback(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	return lx_pcm_hw_params(substream, hw_params, 0);
+}
+
+static int lx_pcm_hw_params_capture(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	return lx_pcm_hw_params(substream, hw_params, 1);
+}
+
+static int lx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	int err = 0;
+	int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+
+	snd_printdd("->lx_pcm_hw_free\n");
+	mutex_lock(&chip->setup_mutex);
+
+	if (chip->hardware_running[is_capture]) {
+		err = lx_hardware_stop(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to stop hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		err = lx_hardware_close(chip, substream);
+		if (err < 0) {
+			snd_printk(KERN_ERR LXP "failed to close hardware. "
+				   "Error code %d\n", err);
+			goto exit;
+		}
+
+		chip->hardware_running[is_capture] = 0;
+	}
+
+	err = snd_pcm_lib_free_pages(substream);
+
+	if (is_capture)
+		chip->capture_stream.stream = 0;
+	else
+		chip->playback_stream.stream = 0;
+
+exit:
+	mutex_unlock(&chip->setup_mutex);
+	return err;
+}
+
+static void lx_trigger_start(struct lx6464es *chip, struct lx_stream *lx_stream)
+{
+	struct snd_pcm_substream *substream = lx_stream->stream;
+	const int is_capture = lx_stream->is_capture;
+
+	int err;
+
+	const u32 channels = substream->runtime->channels;
+	const u32 bytes_per_frame = channels * 3;
+	const u32 period_size = substream->runtime->period_size;
+	const u32 periods = substream->runtime->periods;
+	const u32 period_bytes = period_size * bytes_per_frame;
+
+	dma_addr_t buf = substream->dma_buffer.addr;
+	int i;
+
+	u32 needed, freed;
+	u32 size_array[5];
+
+	for (i = 0; i != periods; ++i) {
+		u32 buffer_index = 0;
+
+		err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed,
+				    size_array);
+		snd_printdd(LXP "starting: needed %d, freed %d\n",
+			    needed, freed);
+
+		err = lx_buffer_give(chip, 0, is_capture, period_bytes,
+				     lower_32_bits(buf), upper_32_bits(buf),
+				     &buffer_index);
+
+		snd_printdd(LXP "starting: buffer index %x on %p (%d bytes)\n",
+			    buffer_index, (void *)buf, period_bytes);
+		buf += period_bytes;
+	}
+
+	err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array);
+	snd_printdd(LXP "starting: needed %d, freed %d\n", needed, freed);
+
+	snd_printd(LXP "starting: starting stream\n");
+	err = lx_stream_start(chip, 0, is_capture);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP "couldn't start stream\n");
+	else
+		lx_stream->status = LX_STREAM_STATUS_RUNNING;
+
+	lx_stream->frame_pos = 0;
+}
+
+static void lx_trigger_stop(struct lx6464es *chip, struct lx_stream *lx_stream)
+{
+	const int is_capture = lx_stream->is_capture;
+	int err;
+
+	snd_printd(LXP "stopping: stopping stream\n");
+	err = lx_stream_stop(chip, 0, is_capture);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP "couldn't stop stream\n");
+	else
+		lx_stream->status = LX_STREAM_STATUS_FREE;
+
+}
+
+static void lx_trigger_tasklet_dispatch_stream(struct lx6464es *chip,
+					       struct lx_stream *lx_stream)
+{
+	switch (lx_stream->status) {
+	case LX_STREAM_STATUS_SCHEDULE_RUN:
+		lx_trigger_start(chip, lx_stream);
+		break;
+
+	case LX_STREAM_STATUS_SCHEDULE_STOP:
+		lx_trigger_stop(chip, lx_stream);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void lx_trigger_tasklet(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	unsigned long flags;
+
+	snd_printdd("->lx_trigger_tasklet\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+	lx_trigger_tasklet_dispatch_stream(chip, &chip->capture_stream);
+	lx_trigger_tasklet_dispatch_stream(chip, &chip->playback_stream);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int lx_pcm_trigger_dispatch(struct lx6464es *chip,
+				   struct lx_stream *lx_stream, int cmd)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		lx_stream->status = LX_STREAM_STATUS_SCHEDULE_RUN;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		lx_stream->status = LX_STREAM_STATUS_SCHEDULE_STOP;
+		break;
+
+	default:
+		err = -EINVAL;
+		goto exit;
+	}
+	tasklet_schedule(&chip->trigger_tasklet);
+
+exit:
+	return err;
+}
+
+
+static int lx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct lx6464es *chip = snd_pcm_substream_chip(substream);
+	const int is_capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	struct lx_stream *stream = is_capture ? &chip->capture_stream :
+		&chip->playback_stream;
+
+	snd_printdd("->lx_pcm_trigger\n");
+
+	return lx_pcm_trigger_dispatch(chip, stream, cmd);
+}
+
+static int snd_lx6464es_free(struct lx6464es *chip)
+{
+	snd_printdd("->snd_lx6464es_free\n");
+
+	lx_irq_disable(chip);
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, chip);
+
+	iounmap(chip->port_dsp_bar);
+	ioport_unmap(chip->port_plx_remapped);
+
+	pci_release_regions(chip->pci);
+	pci_disable_device(chip->pci);
+
+	kfree(chip);
+
+	return 0;
+}
+
+static int snd_lx6464es_dev_free(struct snd_device *device)
+{
+	return snd_lx6464es_free(device->device_data);
+}
+
+/* reset the dsp during initialization */
+static int __devinit lx_init_xilinx_reset(struct lx6464es *chip)
+{
+	int i;
+	u32 plx_reg = lx_plx_reg_read(chip, ePLX_CHIPSC);
+
+	snd_printdd("->lx_init_xilinx_reset\n");
+
+	/* activate reset of xilinx */
+	plx_reg &= ~CHIPSC_RESET_XILINX;
+
+	lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg);
+	msleep(1);
+
+	lx_plx_reg_write(chip, ePLX_MBOX3, 0);
+	msleep(1);
+
+	plx_reg |= CHIPSC_RESET_XILINX;
+	lx_plx_reg_write(chip, ePLX_CHIPSC, plx_reg);
+
+	/* deactivate reset of xilinx */
+	for (i = 0; i != 100; ++i) {
+		u32 reg_mbox3;
+		msleep(10);
+		reg_mbox3 = lx_plx_reg_read(chip, ePLX_MBOX3);
+		if (reg_mbox3) {
+			snd_printd(LXP "xilinx reset done\n");
+			snd_printdd(LXP "xilinx took %d loops\n", i);
+			break;
+		}
+	}
+
+	/* todo: add some error handling? */
+
+	/* clear mr */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	/* le xilinx ES peut ne pas etre encore pret, on attend. */
+	msleep(600);
+
+	return 0;
+}
+
+static int __devinit lx_init_xilinx_test(struct lx6464es *chip)
+{
+	u32 reg;
+
+	snd_printdd("->lx_init_xilinx_test\n");
+
+	/* TEST if we have access to Xilinx/MicroBlaze */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	reg = lx_dsp_reg_read(chip, eReg_CSM);
+
+	if (reg) {
+		snd_printk(KERN_ERR LXP "Problem: Reg_CSM %x.\n", reg);
+
+		/* PCI9056_SPACE0_REMAP */
+		lx_plx_reg_write(chip, ePLX_PCICR, 1);
+
+		reg = lx_dsp_reg_read(chip, eReg_CSM);
+		if (reg) {
+			snd_printk(KERN_ERR LXP "Error: Reg_CSM %x.\n", reg);
+			return -EAGAIN; /* seems to be appropriate */
+		}
+	}
+
+	snd_printd(LXP "Xilinx/MicroBlaze access test successful\n");
+
+	return 0;
+}
+
+/* initialize ethersound */
+static int __devinit lx_init_ethersound_config(struct lx6464es *chip)
+{
+	int i;
+	u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
+
+	u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+		(64 << IOCR_INPUTS_OFFSET) |
+		(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
+
+	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
+		| (default_conf_es & CONFES_WRITE_PART_MASK);
+
+	snd_printdd("->lx_init_ethersound\n");
+
+	chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
+
+	/*
+	 * write it to the card !
+	 * this actually kicks the ES xilinx, the first time since poweron.
+	 * the MAC address in the Reg_ADMACESMSB Reg_ADMACESLSB registers
+	 * is not ready before this is done, and the bit 2 in Reg_CSES is set.
+	 * */
+	lx_dsp_reg_write(chip, eReg_CONFES, conf_es);
+
+	for (i = 0; i != 1000; ++i) {
+		if (lx_dsp_reg_read(chip, eReg_CSES) & 4) {
+			snd_printd(LXP "ethersound initialized after %dms\n",
+				   i);
+			goto ethersound_initialized;
+		}
+		msleep(1);
+	}
+	snd_printk(KERN_WARNING LXP
+		   "ethersound could not be initialized after %dms\n", i);
+	return -ETIMEDOUT;
+
+ ethersound_initialized:
+	snd_printd(LXP "ethersound initialized\n");
+	return 0;
+}
+
+static int __devinit lx_init_get_version_features(struct lx6464es *chip)
+{
+	u32 dsp_version;
+
+	int err;
+
+	snd_printdd("->lx_init_get_version_features\n");
+
+	err = lx_dsp_get_version(chip, &dsp_version);
+
+	if (err == 0) {
+		u32 freq;
+
+		snd_printk(LXP "DSP version: V%02d.%02d #%d\n",
+			   (dsp_version>>16) & 0xff, (dsp_version>>8) & 0xff,
+			   dsp_version & 0xff);
+
+		/* later: what firmware version do we expect? */
+
+		/* retrieve Play/Rec features */
+		/* done here because we may have to handle alternate
+		 * DSP files. */
+		/* later */
+
+		/* init the EtherSound sample rate */
+		err = lx_dsp_get_clock_frequency(chip, &freq);
+		if (err == 0)
+			chip->board_sample_rate = freq;
+		snd_printd(LXP "actual clock frequency %d\n", freq);
+	} else {
+		snd_printk(KERN_ERR LXP "DSP corrupted \n");
+		err = -EAGAIN;
+	}
+
+	return err;
+}
+
+static int lx_set_granularity(struct lx6464es *chip, u32 gran)
+{
+	int err = 0;
+	u32 snapped_gran = MICROBLAZE_IBL_MIN;
+
+	snd_printdd("->lx_set_granularity\n");
+
+	/* blocksize is a power of 2 */
+	while ((snapped_gran < gran) &&
+	       (snapped_gran < MICROBLAZE_IBL_MAX)) {
+		snapped_gran *= 2;
+	}
+
+	if (snapped_gran == chip->pcm_granularity)
+		return 0;
+
+	err = lx_dsp_set_granularity(chip, snapped_gran);
+	if (err < 0) {
+		snd_printk(KERN_WARNING LXP "could not set granularity\n");
+		err = -EAGAIN;
+	}
+
+	if (snapped_gran != gran)
+		snd_printk(LXP "snapped blocksize to %d\n", snapped_gran);
+
+	snd_printd(LXP "set blocksize on board %d\n", snapped_gran);
+	chip->pcm_granularity = snapped_gran;
+
+	return err;
+}
+
+/* initialize and test the xilinx dsp chip */
+static int __devinit lx_init_dsp(struct lx6464es *chip)
+{
+	int err;
+	u8 mac_address[6];
+	int i;
+
+	snd_printdd("->lx_init_dsp\n");
+
+	snd_printd(LXP "initialize board\n");
+	err = lx_init_xilinx_reset(chip);
+	if (err)
+		return err;
+
+	snd_printd(LXP "testing board\n");
+	err = lx_init_xilinx_test(chip);
+	if (err)
+		return err;
+
+	snd_printd(LXP "initialize ethersound configuration\n");
+	err = lx_init_ethersound_config(chip);
+	if (err)
+		return err;
+
+	lx_irq_enable(chip);
+
+	/** \todo the mac address should be ready by not, but it isn't,
+	 *  so we wait for it */
+	for (i = 0; i != 1000; ++i) {
+		err = lx_dsp_get_mac(chip, mac_address);
+		if (err)
+			return err;
+		if (mac_address[0] || mac_address[1] || mac_address[2] ||
+		    mac_address[3] || mac_address[4] || mac_address[5])
+			goto mac_ready;
+		msleep(1);
+	}
+	return -ETIMEDOUT;
+
+mac_ready:
+	snd_printd(LXP "mac address ready read after: %dms\n", i);
+	snd_printk(LXP "mac address: %02X.%02X.%02X.%02X.%02X.%02X\n",
+		   mac_address[0], mac_address[1], mac_address[2],
+		   mac_address[3], mac_address[4], mac_address[5]);
+
+	err = lx_init_get_version_features(chip);
+	if (err)
+		return err;
+
+	lx_set_granularity(chip, MICROBLAZE_IBL_DEFAULT);
+
+	chip->playback_mute = 0;
+
+	return err;
+}
+
+static struct snd_pcm_ops lx_ops_playback = {
+	.open      = lx_pcm_open,
+	.close     = lx_pcm_close,
+	.ioctl     = snd_pcm_lib_ioctl,
+	.prepare   = lx_pcm_prepare,
+	.hw_params = lx_pcm_hw_params_playback,
+	.hw_free   = lx_pcm_hw_free,
+	.trigger   = lx_pcm_trigger,
+	.pointer   = lx_pcm_stream_pointer,
+};
+
+static struct snd_pcm_ops lx_ops_capture = {
+	.open      = lx_pcm_open,
+	.close     = lx_pcm_close,
+	.ioctl     = snd_pcm_lib_ioctl,
+	.prepare   = lx_pcm_prepare,
+	.hw_params = lx_pcm_hw_params_capture,
+	.hw_free   = lx_pcm_hw_free,
+	.trigger   = lx_pcm_trigger,
+	.pointer   = lx_pcm_stream_pointer,
+};
+
+static int __devinit lx_pcm_create(struct lx6464es *chip)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	u32 size = 64 *		     /* channels */
+		3 *		     /* 24 bit samples */
+		MAX_STREAM_BUFFER *  /* periods */
+		MICROBLAZE_IBL_MAX * /* frames per period */
+		2;		     /* duplex */
+
+	size = PAGE_ALIGN(size);
+
+	/* hardcoded device name & channel count */
+	err = snd_pcm_new(chip->card, (char *)card_name, 0,
+			  1, 1, &pcm);
+
+	pcm->private_data = chip;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &lx_ops_playback);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &lx_ops_capture);
+
+	pcm->info_flags = 0;
+	strcpy(pcm->name, card_name);
+
+	err = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+						    snd_dma_pci_data(chip->pci),
+						    size, size);
+	if (err < 0)
+		return err;
+
+	chip->pcm = pcm;
+	chip->capture_stream.is_capture = 1;
+
+	return 0;
+}
+
+static int lx_control_playback_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int lx_control_playback_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct lx6464es *chip = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = chip->playback_mute;
+	return 0;
+}
+
+static int lx_control_playback_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct lx6464es *chip = snd_kcontrol_chip(kcontrol);
+	int changed = 0;
+	int current_value = chip->playback_mute;
+
+	if (current_value != ucontrol->value.integer.value[0]) {
+		lx_level_unmute(chip, 0, !current_value);
+		chip->playback_mute = !current_value;
+		changed = 1;
+	}
+	return changed;
+}
+
+static struct snd_kcontrol_new lx_control_playback_switch __devinitdata = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "PCM Playback Switch",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value = 0,
+	.info = lx_control_playback_info,
+	.get = lx_control_playback_get,
+	.put = lx_control_playback_put
+};
+
+
+
+static void lx_proc_levels_read(struct snd_info_entry *entry,
+				struct snd_info_buffer *buffer)
+{
+	u32 levels[64];
+	int err;
+	int i, j;
+	struct lx6464es *chip = entry->private_data;
+
+	snd_iprintf(buffer, "capture levels:\n");
+	err = lx_level_peaks(chip, 1, 64, levels);
+	if (err < 0)
+		return;
+
+	for (i = 0; i != 8; ++i) {
+		for (j = 0; j != 8; ++j)
+			snd_iprintf(buffer, "%08x ", levels[i*8+j]);
+		snd_iprintf(buffer, "\n");
+	}
+
+	snd_iprintf(buffer, "\nplayback levels:\n");
+
+	err = lx_level_peaks(chip, 0, 64, levels);
+	if (err < 0)
+		return;
+
+	for (i = 0; i != 8; ++i) {
+		for (j = 0; j != 8; ++j)
+			snd_iprintf(buffer, "%08x ", levels[i*8+j]);
+		snd_iprintf(buffer, "\n");
+	}
+
+	snd_iprintf(buffer, "\n");
+}
+
+static int __devinit lx_proc_create(struct snd_card *card, struct lx6464es *chip)
+{
+	struct snd_info_entry *entry;
+	int err = snd_card_proc_new(card, "levels", &entry);
+	if (err < 0)
+		return err;
+
+	snd_info_set_text_ops(entry, chip, lx_proc_levels_read);
+	return 0;
+}
+
+
+static int __devinit snd_lx6464es_create(struct snd_card *card,
+					 struct pci_dev *pci,
+					 struct lx6464es **rchip)
+{
+	struct lx6464es *chip;
+	int err;
+
+	static struct snd_device_ops ops = {
+		.dev_free = snd_lx6464es_dev_free,
+	};
+
+	snd_printdd("->snd_lx6464es_create\n");
+
+	*rchip = NULL;
+
+	/* enable PCI device */
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	pci_set_master(pci);
+
+	/* check if we can restrict PCI DMA transfers to 32 bits */
+	err = pci_set_dma_mask(pci, DMA_32BIT_MASK);
+	if (err < 0) {
+		snd_printk(KERN_ERR "architecture does not support "
+			   "32bit PCI busmaster DMA\n");
+		pci_disable_device(pci);
+		return -ENXIO;
+	}
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL) {
+		err = -ENOMEM;
+		goto alloc_failed;
+	}
+
+	chip->card = card;
+	chip->pci = pci;
+	chip->irq = -1;
+
+	/* initialize synchronization structs */
+	spin_lock_init(&chip->lock);
+	spin_lock_init(&chip->msg_lock);
+	mutex_init(&chip->setup_mutex);
+	tasklet_init(&chip->trigger_tasklet, lx_trigger_tasklet,
+		     (unsigned long)chip);
+	tasklet_init(&chip->tasklet_capture, lx_tasklet_capture,
+		     (unsigned long)chip);
+	tasklet_init(&chip->tasklet_playback, lx_tasklet_playback,
+		     (unsigned long)chip);
+
+	/* request resources */
+	err = pci_request_regions(pci, card_name);
+	if (err < 0)
+		goto request_regions_failed;
+
+	/* plx port */
+	chip->port_plx = pci_resource_start(pci, 1);
+	chip->port_plx_remapped = ioport_map(chip->port_plx,
+					     pci_resource_len(pci, 1));
+
+	/* dsp port */
+	chip->port_dsp_bar = pci_ioremap_bar(pci, 2);
+
+	err = request_irq(pci->irq, lx_interrupt, IRQF_SHARED,
+			  card_name, chip);
+	if (err) {
+		snd_printk(KERN_ERR LXP "unable to grab IRQ %d\n", pci->irq);
+		goto request_irq_failed;
+	}
+	chip->irq = pci->irq;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (err < 0)
+		goto device_new_failed;
+
+	err = lx_init_dsp(chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "error during DSP initialization\n");
+		return err;
+	}
+
+	err = lx_pcm_create(chip);
+	if (err < 0)
+		return err;
+
+	err = lx_proc_create(card, chip);
+	if (err < 0)
+		return err;
+
+	err = snd_ctl_add(card, snd_ctl_new1(&lx_control_playback_switch,
+					     chip));
+	if (err < 0)
+		return err;
+
+	snd_card_set_dev(card, &pci->dev);
+
+	*rchip = chip;
+	return 0;
+
+device_new_failed:
+	free_irq(pci->irq, chip);
+
+request_irq_failed:
+	pci_release_regions(pci);
+
+request_regions_failed:
+	kfree(chip);
+
+alloc_failed:
+	pci_disable_device(pci);
+
+	return err;
+}
+
+static int __devinit snd_lx6464es_probe(struct pci_dev *pci,
+					const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct lx6464es *chip;
+	int err;
+
+	snd_printdd("->snd_lx6464es_probe\n");
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+	if (err < 0)
+		return err;
+
+	err = snd_lx6464es_create(card, pci, &chip);
+	if (err < 0) {
+		snd_printk(KERN_ERR LXP "error during snd_lx6464es_create\n");
+		goto out_free;
+	}
+
+	strcpy(card->driver, "lx6464es");
+	strcpy(card->shortname, "Digigram LX6464ES");
+	sprintf(card->longname, "%s at 0x%lx, 0x%p, irq %i",
+		card->shortname, chip->port_plx,
+		chip->port_dsp_bar, chip->irq);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto out_free;
+
+	snd_printdd(LXP "initialization successful\n");
+	pci_set_drvdata(pci, card);
+	dev++;
+	return 0;
+
+out_free:
+	snd_card_free(card);
+	return err;
+
+}
+
+static void __devexit snd_lx6464es_remove(struct pci_dev *pci)
+{
+	snd_card_free(pci_get_drvdata(pci));
+	pci_set_drvdata(pci, NULL);
+}
+
+
+static struct pci_driver driver = {
+	.name =     "Digigram LX6464ES",
+	.id_table = snd_lx6464es_ids,
+	.probe =    snd_lx6464es_probe,
+	.remove = __devexit_p(snd_lx6464es_remove),
+};
+
+
+/* module initialization */
+static int __init mod_init(void)
+{
+	return pci_register_driver(&driver);
+}
+
+static void __exit mod_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
diff --git a/sound/pci/lx6464es/lx6464es.h b/sound/pci/lx6464es/lx6464es.h
new file mode 100644
index 00000000000..012c010c8c8
--- /dev/null
+++ b/sound/pci/lx6464es/lx6464es.h
@@ -0,0 +1,114 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX6464ES_H
+#define LX6464ES_H
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "lx_core.h"
+
+#define LXP "LX6464ES: "
+
+enum {
+    ES_cmd_free         = 0,    /* no command executing */
+    ES_cmd_processing   = 1,	/* execution of a read/write command */
+    ES_read_pending     = 2,    /* a asynchron read command is pending */
+    ES_read_finishing   = 3,    /* a read command has finished waiting (set by
+				 * Interrupt or CancelIrp) */
+};
+
+enum lx_stream_status {
+	LX_STREAM_STATUS_FREE,
+/* 	LX_STREAM_STATUS_OPEN, */
+	LX_STREAM_STATUS_SCHEDULE_RUN,
+/* 	LX_STREAM_STATUS_STARTED, */
+	LX_STREAM_STATUS_RUNNING,
+	LX_STREAM_STATUS_SCHEDULE_STOP,
+/* 	LX_STREAM_STATUS_STOPPED, */
+/* 	LX_STREAM_STATUS_PAUSED */
+};
+
+
+struct lx_stream {
+	struct snd_pcm_substream  *stream;
+	snd_pcm_uframes_t          frame_pos;
+	enum lx_stream_status      status; /* free, open, running, draining
+					    * pause */
+	int                        is_capture:1;
+};
+
+
+struct lx6464es {
+	struct snd_card        *card;
+	struct pci_dev         *pci;
+	int			irq;
+
+	spinlock_t		lock;        /* interrupt spinlock */
+	struct mutex            setup_mutex; /* mutex used in hw_params, open
+					      * and close */
+
+	struct tasklet_struct   trigger_tasklet; /* trigger tasklet */
+	struct tasklet_struct   tasklet_capture;
+	struct tasklet_struct   tasklet_playback;
+
+	/* ports */
+	unsigned long		port_plx;	   /* io port (size=256) */
+	void __iomem           *port_plx_remapped; /* remapped plx port */
+	void __iomem           *port_dsp_bar;      /* memory port (32-bit,
+						    * non-prefetchable,
+						    * size=8K) */
+
+	/* messaging */
+	spinlock_t		msg_lock;          /* message spinlock */
+	atomic_t	        send_message_locked;
+	struct lx_rmh           rmh;
+
+	/* configuration */
+	uint			freq_ratio : 2;
+	uint                    playback_mute : 1;
+	uint                    hardware_running[2];
+	u32                     board_sample_rate; /* sample rate read from
+						    * board */
+	u32                     sample_rate;	   /* our sample rate */
+	u16                     pcm_granularity;   /* board blocksize */
+
+	/* dma */
+	struct snd_dma_buffer   capture_dma_buf;
+	struct snd_dma_buffer   playback_dma_buf;
+
+	/* pcm */
+	struct snd_pcm         *pcm;
+
+	/* streams */
+	struct lx_stream        capture_stream;
+	struct lx_stream        playback_stream;
+};
+
+
+#endif /* LX6464ES_H */
diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c
new file mode 100644
index 00000000000..5812780d6e8
--- /dev/null
+++ b/sound/pci/lx6464es/lx_core.c
@@ -0,0 +1,1444 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * low-level interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+/* #define RMH_DEBUG 1 */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "lx6464es.h"
+#include "lx_core.h"
+
+/* low-level register access */
+
+static const unsigned long dsp_port_offsets[] = {
+	0,
+	0x400,
+	0x401,
+	0x402,
+	0x403,
+	0x404,
+	0x405,
+	0x406,
+	0x407,
+	0x408,
+	0x409,
+	0x40a,
+	0x40b,
+	0x40c,
+
+	0x410,
+	0x411,
+	0x412,
+	0x413,
+	0x414,
+	0x415,
+	0x416,
+
+	0x420,
+	0x430,
+	0x431,
+	0x432,
+	0x433,
+	0x434,
+	0x440
+};
+
+static void __iomem *lx_dsp_register(struct lx6464es *chip, int port)
+{
+	void __iomem *base_address = chip->port_dsp_bar;
+	return base_address + dsp_port_offsets[port]*4;
+}
+
+unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	return ioread32(address);
+}
+
+void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	memcpy_fromio(data, address, len*sizeof(u32));
+}
+
+
+void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	iowrite32(data, address);
+}
+
+void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
+			 u32 len)
+{
+	void __iomem *address = lx_dsp_register(chip, port);
+	memcpy_toio(address, data, len*sizeof(u32));
+}
+
+
+static const unsigned long plx_port_offsets[] = {
+	0x04,
+	0x40,
+	0x44,
+	0x48,
+	0x4c,
+	0x50,
+	0x54,
+	0x58,
+	0x5c,
+	0x64,
+	0x68,
+	0x6C
+};
+
+static void __iomem *lx_plx_register(struct lx6464es *chip, int port)
+{
+	void __iomem *base_address = chip->port_plx_remapped;
+	return base_address + plx_port_offsets[port];
+}
+
+unsigned long lx_plx_reg_read(struct lx6464es *chip, int port)
+{
+	void __iomem *address = lx_plx_register(chip, port);
+	return ioread32(address);
+}
+
+void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data)
+{
+	void __iomem *address = lx_plx_register(chip, port);
+	iowrite32(data, address);
+}
+
+u32 lx_plx_mbox_read(struct lx6464es *chip, int mbox_nr)
+{
+	int index;
+
+	switch (mbox_nr) {
+	case 1:
+		index = ePLX_MBOX1;    break;
+	case 2:
+		index = ePLX_MBOX2;    break;
+	case 3:
+		index = ePLX_MBOX3;    break;
+	case 4:
+		index = ePLX_MBOX4;    break;
+	case 5:
+		index = ePLX_MBOX5;    break;
+	case 6:
+		index = ePLX_MBOX6;    break;
+	case 7:
+		index = ePLX_MBOX7;    break;
+	case 0:			/* reserved for HF flags */
+		snd_BUG();
+	default:
+		return 0xdeadbeef;
+	}
+
+	return lx_plx_reg_read(chip, index);
+}
+
+int lx_plx_mbox_write(struct lx6464es *chip, int mbox_nr, u32 value)
+{
+	int index = -1;
+
+	switch (mbox_nr) {
+	case 1:
+		index = ePLX_MBOX1;    break;
+	case 3:
+		index = ePLX_MBOX3;    break;
+	case 4:
+		index = ePLX_MBOX4;    break;
+	case 5:
+		index = ePLX_MBOX5;    break;
+	case 6:
+		index = ePLX_MBOX6;    break;
+	case 7:
+		index = ePLX_MBOX7;    break;
+	case 0:			/* reserved for HF flags */
+	case 2:			/* reserved for Pipe States
+				 * the DSP keeps an image of it */
+		snd_BUG();
+		return -EBADRQC;
+	}
+
+	lx_plx_reg_write(chip, index, value);
+	return 0;
+}
+
+
+/* rmh */
+
+#ifdef CONFIG_SND_DEBUG
+#define CMD_NAME(a) a
+#else
+#define CMD_NAME(a) NULL
+#endif
+
+#define Reg_CSM_MR			0x00000002
+#define Reg_CSM_MC			0x00000001
+
+struct dsp_cmd_info {
+	u32    dcCodeOp;	/* Op Code of the command (usually 1st 24-bits
+				 * word).*/
+	u16    dcCmdLength;	/* Command length in words of 24 bits.*/
+	u16    dcStatusType;	/* Status type: 0 for fixed length, 1 for
+				 * random. */
+	u16    dcStatusLength;	/* Status length (if fixed).*/
+	char  *dcOpName;
+};
+
+/*
+  Initialization and control data for the Microblaze interface
+  - OpCode:
+    the opcode field of the command set at the proper offset
+  - CmdLength
+    the number of command words
+  - StatusType
+    offset in the status registers: 0 means that the return value may be
+    different from 0, and must be read
+  - StatusLength
+    the number of status words (in addition to the return value)
+*/
+
+static struct dsp_cmd_info dsp_commands[] =
+{
+	{ (CMD_00_INFO_DEBUG << OPCODE_OFFSET)			, 1 /*custom*/
+	  , 1	, 0 /**/		    , CMD_NAME("INFO_DEBUG") },
+	{ (CMD_01_GET_SYS_CFG << OPCODE_OFFSET) 		, 1 /**/
+	  , 1      , 2 /**/		    , CMD_NAME("GET_SYS_CFG") },
+	{ (CMD_02_SET_GRANULARITY << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_GRANULARITY") },
+	{ (CMD_03_SET_TIMER_IRQ << OPCODE_OFFSET)		, 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_TIMER_IRQ") },
+	{ (CMD_04_GET_EVENT << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 0 /*up to 10*/     , CMD_NAME("GET_EVENT") },
+	{ (CMD_05_GET_PIPES << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 2 /*up to 4*/      , CMD_NAME("GET_PIPES") },
+	{ (CMD_06_ALLOCATE_PIPE << OPCODE_OFFSET)		, 1 /**/
+	  , 0      , 0 /**/		    , CMD_NAME("ALLOCATE_PIPE") },
+	{ (CMD_07_RELEASE_PIPE << OPCODE_OFFSET)		, 1 /**/
+	  , 0      , 0 /**/		    , CMD_NAME("RELEASE_PIPE") },
+	{ (CMD_08_ASK_BUFFERS << OPCODE_OFFSET) 		, 1 /**/
+	  , 1      , MAX_STREAM_BUFFER  , CMD_NAME("ASK_BUFFERS") },
+	{ (CMD_09_STOP_PIPE << OPCODE_OFFSET)			, 1 /**/
+	  , 0      , 0 /*up to 2*/      , CMD_NAME("STOP_PIPE") },
+	{ (CMD_0A_GET_PIPE_SPL_COUNT << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 1 /*up to 2*/      , CMD_NAME("GET_PIPE_SPL_COUNT") },
+	{ (CMD_0B_TOGGLE_PIPE_STATE << OPCODE_OFFSET)           , 1 /*up to 5*/
+	  , 1      , 0 /**/		    , CMD_NAME("TOGGLE_PIPE_STATE") },
+	{ (CMD_0C_DEF_STREAM << OPCODE_OFFSET)			, 1 /*up to 4*/
+	  , 1      , 0 /**/		    , CMD_NAME("DEF_STREAM") },
+	{ (CMD_0D_SET_MUTE  << OPCODE_OFFSET)			, 3 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_MUTE") },
+	{ (CMD_0E_GET_STREAM_SPL_COUNT << OPCODE_OFFSET)        , 1/**/
+	  , 1      , 2 /**/		    , CMD_NAME("GET_STREAM_SPL_COUNT") },
+	{ (CMD_0F_UPDATE_BUFFER << OPCODE_OFFSET)		, 3 /*up to 4*/
+	  , 0      , 1 /**/		    , CMD_NAME("UPDATE_BUFFER") },
+	{ (CMD_10_GET_BUFFER << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 4 /**/		    , CMD_NAME("GET_BUFFER") },
+	{ (CMD_11_CANCEL_BUFFER << OPCODE_OFFSET)		, 1 /**/
+	  , 1      , 1 /*up to 4*/      , CMD_NAME("CANCEL_BUFFER") },
+	{ (CMD_12_GET_PEAK << OPCODE_OFFSET)			, 1 /**/
+	  , 1      , 1 /**/		    , CMD_NAME("GET_PEAK") },
+	{ (CMD_13_SET_STREAM_STATE << OPCODE_OFFSET)	        , 1 /**/
+	  , 1      , 0 /**/		    , CMD_NAME("SET_STREAM_STATE") },
+};
+
+static void lx_message_init(struct lx_rmh *rmh, enum cmd_mb_opcodes cmd)
+{
+	snd_BUG_ON(cmd >= CMD_14_INVALID);
+
+	rmh->cmd[0] = dsp_commands[cmd].dcCodeOp;
+	rmh->cmd_len = dsp_commands[cmd].dcCmdLength;
+	rmh->stat_len = dsp_commands[cmd].dcStatusLength;
+	rmh->dsp_stat = dsp_commands[cmd].dcStatusType;
+	rmh->cmd_idx = cmd;
+	memset(&rmh->cmd[1], 0, (REG_CRM_NUMBER - 1) * sizeof(u32));
+
+#ifdef CONFIG_SND_DEBUG
+	memset(rmh->stat, 0, REG_CRM_NUMBER * sizeof(u32));
+#endif
+#ifdef RMH_DEBUG
+	rmh->cmd_idx = cmd;
+#endif
+}
+
+#ifdef RMH_DEBUG
+#define LXRMH "lx6464es rmh: "
+static void lx_message_dump(struct lx_rmh *rmh)
+{
+	u8 idx = rmh->cmd_idx;
+	int i;
+
+	snd_printk(LXRMH "command %s\n", dsp_commands[idx].dcOpName);
+
+	for (i = 0; i != rmh->cmd_len; ++i)
+		snd_printk(LXRMH "\tcmd[%d] %08x\n", i, rmh->cmd[i]);
+
+	for (i = 0; i != rmh->stat_len; ++i)
+		snd_printk(LXRMH "\tstat[%d]: %08x\n", i, rmh->stat[i]);
+	snd_printk("\n");
+}
+#else
+static inline void lx_message_dump(struct lx_rmh *rmh)
+{}
+#endif
+
+
+
+/* sleep 500 - 100 = 400 times 100us -> the timeout is >= 40 ms */
+#define XILINX_TIMEOUT_MS       40
+#define XILINX_POLL_NO_SLEEP    100
+#define XILINX_POLL_ITERATIONS  150
+
+#if 0 /* not used now */
+static int lx_message_send(struct lx6464es *chip, struct lx_rmh *rmh)
+{
+	u32 reg = ED_DSP_TIMED_OUT;
+	int dwloop;
+	int answer_received;
+
+	if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) {
+		snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg);
+		return -EBUSY;
+	}
+
+	/* write command */
+	lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len);
+
+	snd_BUG_ON(atomic_read(&chip->send_message_locked) != 0);
+	atomic_set(&chip->send_message_locked, 1);
+
+	/* MicoBlaze gogogo */
+	lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC);
+
+	/* wait for interrupt to answer */
+	for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS; ++dwloop) {
+		answer_received = atomic_read(&chip->send_message_locked);
+		if (answer_received == 0)
+			break;
+		msleep(1);
+	}
+
+	if (answer_received == 0) {
+		/* in Debug mode verify Reg_CSM_MR */
+		snd_BUG_ON(!(lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR));
+
+		/* command finished, read status */
+		if (rmh->dsp_stat == 0)
+			reg = lx_dsp_reg_read(chip, eReg_CRM1);
+		else
+			reg = 0;
+	} else {
+		int i;
+		snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! "
+			   "Interrupts disabled?\n");
+
+		/* attente bit Reg_CSM_MR */
+		for (i = 0; i != XILINX_POLL_ITERATIONS; i++) {
+			if ((lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR)) {
+				if (rmh->dsp_stat == 0)
+					reg = lx_dsp_reg_read(chip, eReg_CRM1);
+				else
+					reg = 0;
+				goto polling_successful;
+			}
+
+			if (i > XILINX_POLL_NO_SLEEP)
+				msleep(1);
+		}
+		snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send! "
+			   "polling failed\n");
+
+polling_successful:
+		atomic_set(&chip->send_message_locked, 0);
+	}
+
+	if ((reg & ERROR_VALUE) == 0) {
+		/* read response */
+		if (rmh->stat_len) {
+			snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1));
+
+			lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat,
+					   rmh->stat_len);
+		}
+	} else
+		snd_printk(KERN_WARNING LXP "lx_message_send: error_value %x\n",
+			   reg);
+
+	/* clear Reg_CSM_MR */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	switch (reg) {
+	case ED_DSP_TIMED_OUT:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n");
+		return -ETIMEDOUT;
+
+	case ED_DSP_CRASHED:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n");
+		return -EAGAIN;
+	}
+
+	lx_message_dump(rmh);
+	return 0;
+}
+#endif /* not used now */
+
+static int lx_message_send_atomic(struct lx6464es *chip, struct lx_rmh *rmh)
+{
+	u32 reg = ED_DSP_TIMED_OUT;
+	int dwloop;
+
+	if (lx_dsp_reg_read(chip, eReg_CSM) & (Reg_CSM_MC | Reg_CSM_MR)) {
+		snd_printk(KERN_ERR LXP "PIOSendMessage eReg_CSM %x\n", reg);
+		return -EBUSY;
+	}
+
+	/* write command */
+	lx_dsp_reg_writebuf(chip, eReg_CRM1, rmh->cmd, rmh->cmd_len);
+
+	/* MicoBlaze gogogo */
+	lx_dsp_reg_write(chip, eReg_CSM, Reg_CSM_MC);
+
+	/* wait for interrupt to answer */
+	for (dwloop = 0; dwloop != XILINX_TIMEOUT_MS * 1000; ++dwloop) {
+		if (lx_dsp_reg_read(chip, eReg_CSM) & Reg_CSM_MR) {
+			if (rmh->dsp_stat == 0)
+				reg = lx_dsp_reg_read(chip, eReg_CRM1);
+			else
+				reg = 0;
+			goto polling_successful;
+		} else
+			udelay(1);
+	}
+	snd_printk(KERN_WARNING LXP "TIMEOUT lx_message_send_atomic! "
+		   "polling failed\n");
+
+polling_successful:
+	if ((reg & ERROR_VALUE) == 0) {
+		/* read response */
+		if (rmh->stat_len) {
+			snd_BUG_ON(rmh->stat_len >= (REG_CRM_NUMBER-1));
+			lx_dsp_reg_readbuf(chip, eReg_CRM2, rmh->stat,
+					   rmh->stat_len);
+		}
+	} else
+		snd_printk(LXP "rmh error: %08x\n", reg);
+
+	/* clear Reg_CSM_MR */
+	lx_dsp_reg_write(chip, eReg_CSM, 0);
+
+	switch (reg) {
+	case ED_DSP_TIMED_OUT:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp timeout\n");
+		return -ETIMEDOUT;
+
+	case ED_DSP_CRASHED:
+		snd_printk(KERN_WARNING LXP "lx_message_send: dsp crashed\n");
+		return -EAGAIN;
+	}
+
+	lx_message_dump(rmh);
+
+	return reg;
+}
+
+
+/* low-level dsp access */
+int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version)
+{
+	u16 ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG);
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	*rdsp_version = chip->rmh.stat[1];
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq)
+{
+	u16 ret = 0;
+	unsigned long flags;
+	u32 freq_raw = 0;
+	u32 freq = 0;
+	u32 frequency = 0;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_01_GET_SYS_CFG);
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (ret == 0) {
+		freq_raw = chip->rmh.stat[0] >> FREQ_FIELD_OFFSET;
+		freq = freq_raw & XES_FREQ_COUNT8_MASK;
+
+		if ((freq < XES_FREQ_COUNT8_48_MAX) ||
+		    (freq > XES_FREQ_COUNT8_44_MIN))
+			frequency = 0; /* unknown */
+		else if (freq >= XES_FREQ_COUNT8_44_MAX)
+			frequency = 44100;
+		else
+			frequency = 48000;
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	*rfreq = frequency * chip->freq_ratio;
+
+	return ret;
+}
+
+int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address)
+{
+	u32 macmsb, maclsb;
+
+	macmsb = lx_dsp_reg_read(chip, eReg_ADMACESMSB) & 0x00FFFFFF;
+	maclsb = lx_dsp_reg_read(chip, eReg_ADMACESLSB) & 0x00FFFFFF;
+
+	/* todo: endianess handling */
+	mac_address[5] = ((u8 *)(&maclsb))[0];
+	mac_address[4] = ((u8 *)(&maclsb))[1];
+	mac_address[3] = ((u8 *)(&maclsb))[2];
+	mac_address[2] = ((u8 *)(&macmsb))[0];
+	mac_address[1] = ((u8 *)(&macmsb))[1];
+	mac_address[0] = ((u8 *)(&macmsb))[2];
+
+	return 0;
+}
+
+
+int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_02_SET_GRANULARITY);
+	chip->rmh.cmd[0] |= gran;
+
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	lx_message_init(&chip->rmh, CMD_04_GET_EVENT);
+	chip->rmh.stat_len = 9;	/* we don't necessarily need the full length */
+
+	ret = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (!ret)
+		memcpy(data, chip->rmh.stat, chip->rmh.stat_len * sizeof(u32));
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return ret;
+}
+
+#define CSES_TIMEOUT        100     /* microseconds */
+#define CSES_CE             0x0001
+#define CSES_BROADCAST      0x0002
+#define CSES_UPDATE_LDSV    0x0004
+
+int lx_dsp_es_check_pipeline(struct lx6464es *chip)
+{
+	int i;
+
+	for (i = 0; i != CSES_TIMEOUT; ++i) {
+		/*
+		 * le bit CSES_UPDATE_LDSV est à 1 dés que le macprog
+		 * est pret. il re-passe à 0 lorsque le premier read a
+		 * été fait. pour l'instant on retire le test car ce bit
+		 * passe a 1 environ 200 à 400 ms aprés que le registre
+		 * confES à été écrit (kick du xilinx ES).
+		 *
+		 * On ne teste que le bit CE.
+		 * */
+
+		u32 cses = lx_dsp_reg_read(chip, eReg_CSES);
+
+		if ((cses & CSES_CE) == 0)
+			return 0;
+
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+
+#define PIPE_INFO_TO_CMD(capture, pipe)					\
+	((u32)((u32)(pipe) | ((capture) ? ID_IS_CAPTURE : 0L)) << ID_OFFSET)
+
+
+
+/* low-level pipe handling */
+int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture,
+		     int channels)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_06_ALLOCATE_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= channels;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	if (err != 0)
+		snd_printk(KERN_ERR "lx6464es: could not allocate pipe\n");
+
+	return err;
+}
+
+int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_07_RELEASE_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture,
+		  u32 *r_needed, u32 *r_freed, u32 *size_array)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+#ifdef CONFIG_SND_DEBUG
+	if (size_array)
+		memset(size_array, 0, sizeof(u32)*MAX_STREAM_BUFFER);
+#endif
+
+	*r_needed = 0;
+	*r_freed = 0;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_08_ASK_BUFFERS);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (!err) {
+		int i;
+		for (i = 0; i < MAX_STREAM_BUFFER; ++i) {
+			u32 stat = chip->rmh.stat[i];
+			if (stat & (BF_EOB << BUFF_FLAGS_OFFSET)) {
+				/* finished */
+				*r_freed += 1;
+				if (size_array)
+					size_array[i] = stat & MASK_DATA_SIZE;
+			} else if ((stat & (BF_VALID << BUFF_FLAGS_OFFSET))
+				   == 0)
+				/* free */
+				*r_needed += 1;
+		}
+
+#if 0
+		snd_printdd(LXP "CMD_08_ASK_BUFFERS: needed %d, freed %d\n",
+			    *r_needed, *r_freed);
+		for (i = 0; i < MAX_STREAM_BUFFER; ++i) {
+			for (i = 0; i != chip->rmh.stat_len; ++i)
+				snd_printdd("  stat[%d]: %x, %x\n", i,
+					    chip->rmh.stat[i],
+					    chip->rmh.stat[i] & MASK_DATA_SIZE);
+		}
+#endif
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_09_STOP_PIPE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static int lx_pipe_toggle_state(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0B_TOGGLE_PIPE_STATE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err;
+
+	err = lx_pipe_wait_for_idle(chip, pipe, is_capture);
+	if (err < 0)
+		return err;
+
+	err = lx_pipe_toggle_state(chip, pipe, is_capture);
+
+	return err;
+}
+
+int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	int err = 0;
+
+	err = lx_pipe_wait_for_start(chip, pipe, is_capture);
+	if (err < 0)
+		return err;
+
+	err = lx_pipe_toggle_state(chip, pipe, is_capture);
+
+	return err;
+}
+
+
+int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture,
+			 u64 *rsample_count)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.stat_len = 2;	/* need all words here! */
+
+	err = lx_message_send_atomic(chip, &chip->rmh); /* don't sleep! */
+
+	if (err != 0)
+		snd_printk(KERN_ERR
+			   "lx6464es: could not query pipe's sample count\n");
+	else {
+		*rsample_count = ((u64)(chip->rmh.stat[0] & MASK_SPL_COUNT_HI)
+				  << 24)     /* hi part */
+			+ chip->rmh.stat[1]; /* lo part */
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0A_GET_PIPE_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err != 0)
+		snd_printk(KERN_ERR "lx6464es: could not query pipe's state\n");
+	else
+		*rstate = (chip->rmh.stat[0] >> PSTATE_OFFSET) & 0x0F;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static int lx_pipe_wait_for_state(struct lx6464es *chip, u32 pipe,
+				  int is_capture, u16 state)
+{
+	int i;
+
+	/* max 2*PCMOnlyGranularity = 2*1024 at 44100 = < 50 ms:
+	 * timeout 50 ms */
+	for (i = 0; i != 50; ++i) {
+		u16 current_state;
+		int err = lx_pipe_state(chip, pipe, is_capture, &current_state);
+
+		if (err < 0)
+			return err;
+
+		if (current_state == state)
+			return 0;
+
+		mdelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_RUN);
+}
+
+int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture)
+{
+	return lx_pipe_wait_for_state(chip, pipe, is_capture, PSTATE_IDLE);
+}
+
+/* low-level stream handling */
+int lx_stream_set_state(struct lx6464es *chip, u32 pipe,
+			       int is_capture, enum stream_state_t state)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_13_SET_STREAM_STATE);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= state;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime,
+			 u32 pipe, int is_capture)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	u32 channels = runtime->channels;
+
+	if (runtime->channels != channels)
+		snd_printk(KERN_ERR LXP "channel count mismatch: %d vs %d",
+			   runtime->channels, channels);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0C_DEF_STREAM);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	if (runtime->sample_bits == 16)
+		/* 16 bit format */
+		chip->rmh.cmd[0] |= (STREAM_FMT_16b << STREAM_FMT_OFFSET);
+
+	if (snd_pcm_format_little_endian(runtime->format))
+		/* little endian/intel format */
+		chip->rmh.cmd[0] |= (STREAM_FMT_intel << STREAM_FMT_OFFSET);
+
+	chip->rmh.cmd[0] |= channels-1;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+
+	return err;
+}
+
+int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture,
+		    int *rstate)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	*rstate = (chip->rmh.stat[0] & SF_START) ? START_STATE : PAUSE_STATE;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture,
+			      u64 *r_bytepos)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0E_GET_STREAM_SPL_COUNT);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	*r_bytepos = ((u64) (chip->rmh.stat[0] & MASK_SPL_COUNT_HI)
+		      << 32)	     /* hi part */
+		+ chip->rmh.stat[1]; /* lo part */
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+/* low-level buffer handling */
+int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi,
+		   u32 *r_buffer_index)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0F_UPDATE_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= BF_NOTIFY_EOB; /* request interrupt notification */
+
+	/* todo: pause request, circular buffer */
+
+	chip->rmh.cmd[1] = buffer_size & MASK_DATA_SIZE;
+	chip->rmh.cmd[2] = buf_address_lo;
+
+	if (buf_address_hi) {
+		chip->rmh.cmd_len = 4;
+		chip->rmh.cmd[3] = buf_address_hi;
+		chip->rmh.cmd[0] |= BF_64BITS_ADR;
+	}
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err == 0) {
+		*r_buffer_index = chip->rmh.stat[0];
+		goto done;
+	}
+
+	if (err == EB_RBUFFERS_TABLE_OVERFLOW)
+		snd_printk(LXP "lx_buffer_give EB_RBUFFERS_TABLE_OVERFLOW\n");
+
+	if (err == EB_INVALID_STREAM)
+		snd_printk(LXP "lx_buffer_give EB_INVALID_STREAM\n");
+
+	if (err == EB_CMD_REFUSED)
+		snd_printk(LXP "lx_buffer_give EB_CMD_REFUSED\n");
+
+ done:
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 *r_buffer_size)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= MASK_BUFFER_ID; /* ask for the current buffer: the
+					     * microblaze will seek for it */
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	if (err == 0)
+		*r_buffer_size = chip->rmh.stat[0]  & MASK_DATA_SIZE;
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture,
+		     u32 buffer_index)
+{
+	int err;
+	unsigned long flags;
+
+	u32 pipe_cmd = PIPE_INFO_TO_CMD(is_capture, pipe);
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_11_CANCEL_BUFFER);
+
+	chip->rmh.cmd[0] |= pipe_cmd;
+	chip->rmh.cmd[0] |= buffer_index;
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+
+/* low-level gain/peak handling
+ *
+ * \todo: can we unmute capture/playback channels independently?
+ *
+ * */
+int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute)
+{
+	int err;
+	unsigned long flags;
+
+	/* bit set to 1: channel muted */
+	u64 mute_mask = unmute ? 0 : 0xFFFFFFFFFFFFFFFFLLU;
+
+	spin_lock_irqsave(&chip->msg_lock, flags);
+	lx_message_init(&chip->rmh, CMD_0D_SET_MUTE);
+
+	chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, 0);
+
+	chip->rmh.cmd[1] = (u32)(mute_mask >> (u64)32);	       /* hi part */
+	chip->rmh.cmd[2] = (u32)(mute_mask & (u64)0xFFFFFFFF); /* lo part */
+
+	snd_printk("mute %x %x %x\n", chip->rmh.cmd[0], chip->rmh.cmd[1],
+		   chip->rmh.cmd[2]);
+
+	err = lx_message_send_atomic(chip, &chip->rmh);
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+static u32 peak_map[] = {
+	0x00000109, /* -90.308dB */
+	0x0000083B, /* -72.247dB */
+	0x000020C4, /* -60.205dB */
+	0x00008273, /* -48.030dB */
+	0x00020756, /* -36.005dB */
+	0x00040C37, /* -30.001dB */
+	0x00081385, /* -24.002dB */
+	0x00101D3F, /* -18.000dB */
+	0x0016C310, /* -15.000dB */
+	0x002026F2, /* -12.001dB */
+	0x002D6A86, /* -9.000dB */
+	0x004026E6, /* -6.004dB */
+	0x005A9DF6, /* -3.000dB */
+	0x0065AC8B, /* -2.000dB */
+	0x00721481, /* -1.000dB */
+	0x007FFFFF, /* FS */
+};
+
+int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels,
+		   u32 *r_levels)
+{
+	int err = 0;
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&chip->msg_lock, flags);
+
+	for (i = 0; i < channels; i += 4) {
+		u32 s0, s1, s2, s3;
+
+		lx_message_init(&chip->rmh, CMD_12_GET_PEAK);
+		chip->rmh.cmd[0] |= PIPE_INFO_TO_CMD(is_capture, i);
+
+		err = lx_message_send_atomic(chip, &chip->rmh);
+
+		if (err == 0) {
+			s0 = peak_map[chip->rmh.stat[0] & 0x0F];
+			s1 = peak_map[(chip->rmh.stat[0] >>  4) & 0xf];
+			s2 = peak_map[(chip->rmh.stat[0] >>  8) & 0xf];
+			s3 = peak_map[(chip->rmh.stat[0] >>  12) & 0xf];
+		} else
+			s0 = s1 = s2 = s3 = 0;
+
+		r_levels[0] = s0;
+		r_levels[1] = s1;
+		r_levels[2] = s2;
+		r_levels[3] = s3;
+
+		r_levels += 4;
+	}
+
+	spin_unlock_irqrestore(&chip->msg_lock, flags);
+	return err;
+}
+
+/* interrupt handling */
+#define PCX_IRQ_NONE 0
+#define IRQCS_ACTIVE_PCIDB  0x00002000L         /* Bit nø 13 */
+#define IRQCS_ENABLE_PCIIRQ 0x00000100L         /* Bit nø 08 */
+#define IRQCS_ENABLE_PCIDB  0x00000200L         /* Bit nø 09 */
+
+static u32 lx_interrupt_test_ack(struct lx6464es *chip)
+{
+	u32 irqcs = lx_plx_reg_read(chip, ePLX_IRQCS);
+
+	/* Test if PCI Doorbell interrupt is active */
+	if (irqcs & IRQCS_ACTIVE_PCIDB)	{
+		u32 temp;
+		irqcs = PCX_IRQ_NONE;
+
+		while ((temp = lx_plx_reg_read(chip, ePLX_L2PCIDB))) {
+			/* RAZ interrupt */
+			irqcs |= temp;
+			lx_plx_reg_write(chip, ePLX_L2PCIDB, temp);
+		}
+
+		return irqcs;
+	}
+	return PCX_IRQ_NONE;
+}
+
+static int lx_interrupt_ack(struct lx6464es *chip, u32 *r_irqsrc,
+			    int *r_async_pending, int *r_async_escmd)
+{
+	u32 irq_async;
+	u32 irqsrc = lx_interrupt_test_ack(chip);
+
+	if (irqsrc == PCX_IRQ_NONE)
+		return 0;
+
+	*r_irqsrc = irqsrc;
+
+	irq_async = irqsrc & MASK_SYS_ASYNC_EVENTS; /* + EtherSound response
+						     * (set by xilinx) + EOB */
+
+	if (irq_async & MASK_SYS_STATUS_ESA) {
+		irq_async &= ~MASK_SYS_STATUS_ESA;
+		*r_async_escmd = 1;
+	}
+
+	if (irqsrc & MASK_SYS_STATUS_CMD_DONE)
+		/* xilinx command notification */
+		atomic_set(&chip->send_message_locked, 0);
+
+	if (irq_async) {
+		/* snd_printd("interrupt: async event pending\n"); */
+		*r_async_pending = 1;
+	}
+
+	return 1;
+}
+
+static int lx_interrupt_handle_async_events(struct lx6464es *chip, u32 irqsrc,
+					    int *r_freq_changed,
+					    u64 *r_notified_in_pipe_mask,
+					    u64 *r_notified_out_pipe_mask)
+{
+	int err;
+	u32 stat[9];		/* answer from CMD_04_GET_EVENT */
+
+	/* On peut optimiser pour ne pas lire les evenements vides
+	 * les mots de réponse sont dans l'ordre suivant :
+	 * Stat[0]	mot de status général
+	 * Stat[1]	fin de buffer OUT pF
+	 * Stat[2]	fin de buffer OUT pf
+	 * Stat[3]	fin de buffer IN pF
+	 * Stat[4]	fin de buffer IN pf
+	 * Stat[5]	underrun poid fort
+	 * Stat[6]	underrun poid faible
+	 * Stat[7]	overrun poid fort
+	 * Stat[8]	overrun poid faible
+	 * */
+
+	u64 orun_mask;
+	u64 urun_mask;
+#if 0
+	int has_underrun   = (irqsrc & MASK_SYS_STATUS_URUN) ? 1 : 0;
+	int has_overrun    = (irqsrc & MASK_SYS_STATUS_ORUN) ? 1 : 0;
+#endif
+	int eb_pending_out = (irqsrc & MASK_SYS_STATUS_EOBO) ? 1 : 0;
+	int eb_pending_in  = (irqsrc & MASK_SYS_STATUS_EOBI) ? 1 : 0;
+
+	*r_freq_changed = (irqsrc & MASK_SYS_STATUS_FREQ) ? 1 : 0;
+
+	err = lx_dsp_read_async_events(chip, stat);
+	if (err < 0)
+		return err;
+
+	if (eb_pending_in) {
+		*r_notified_in_pipe_mask = ((u64)stat[3] << 32)
+			+ stat[4];
+		snd_printdd(LXP "interrupt: EOBI pending %llx\n",
+			    *r_notified_in_pipe_mask);
+	}
+	if (eb_pending_out) {
+		*r_notified_out_pipe_mask = ((u64)stat[1] << 32)
+			+ stat[2];
+		snd_printdd(LXP "interrupt: EOBO pending %llx\n",
+			    *r_notified_out_pipe_mask);
+	}
+
+	orun_mask = ((u64)stat[7] << 32) + stat[8];
+	urun_mask = ((u64)stat[5] << 32) + stat[6];
+
+	/* todo: handle xrun notification */
+
+	return err;
+}
+
+static int lx_interrupt_request_new_buffer(struct lx6464es *chip,
+					   struct lx_stream *lx_stream)
+{
+	struct snd_pcm_substream *substream = lx_stream->stream;
+	int is_capture = lx_stream->is_capture;
+	int err;
+	unsigned long flags;
+
+	const u32 channels = substream->runtime->channels;
+	const u32 bytes_per_frame = channels * 3;
+	const u32 period_size = substream->runtime->period_size;
+	const u32 period_bytes = period_size * bytes_per_frame;
+	const u32 pos = lx_stream->frame_pos;
+	const u32 next_pos = ((pos+1) == substream->runtime->periods) ?
+		0 : pos + 1;
+
+	dma_addr_t buf = substream->dma_buffer.addr + pos * period_bytes;
+	u32 buf_hi = 0;
+	u32 buf_lo = 0;
+	u32 buffer_index = 0;
+
+	u32 needed, freed;
+	u32 size_array[MAX_STREAM_BUFFER];
+
+	snd_printdd("->lx_interrupt_request_new_buffer\n");
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	err = lx_buffer_ask(chip, 0, is_capture, &needed, &freed, size_array);
+	snd_printdd(LXP "interrupt: needed %d, freed %d\n", needed, freed);
+
+	unpack_pointer(buf, &buf_lo, &buf_hi);
+	err = lx_buffer_give(chip, 0, is_capture, period_bytes, buf_lo, buf_hi,
+			     &buffer_index);
+	snd_printdd(LXP "interrupt: gave buffer index %x on %p (%d bytes)\n",
+		    buffer_index, (void *)buf, period_bytes);
+
+	lx_stream->frame_pos = next_pos;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return err;
+}
+
+void lx_tasklet_playback(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	struct lx_stream *lx_stream = &chip->playback_stream;
+	int err;
+
+	snd_printdd("->lx_tasklet_playback\n");
+
+	err = lx_interrupt_request_new_buffer(chip, lx_stream);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP
+			   "cannot request new buffer for playback\n");
+
+	snd_pcm_period_elapsed(lx_stream->stream);
+}
+
+void lx_tasklet_capture(unsigned long data)
+{
+	struct lx6464es *chip = (struct lx6464es *)data;
+	struct lx_stream *lx_stream = &chip->capture_stream;
+	int err;
+
+	snd_printdd("->lx_tasklet_capture\n");
+	err = lx_interrupt_request_new_buffer(chip, lx_stream);
+	if (err < 0)
+		snd_printk(KERN_ERR LXP
+			   "cannot request new buffer for capture\n");
+
+	snd_pcm_period_elapsed(lx_stream->stream);
+}
+
+
+
+static int lx_interrupt_handle_audio_transfer(struct lx6464es *chip,
+					      u64 notified_in_pipe_mask,
+					      u64 notified_out_pipe_mask)
+{
+	int err = 0;
+
+	if (notified_in_pipe_mask) {
+		snd_printdd(LXP "requesting audio transfer for capture\n");
+		tasklet_hi_schedule(&chip->tasklet_capture);
+	}
+
+	if (notified_out_pipe_mask) {
+		snd_printdd(LXP "requesting audio transfer for playback\n");
+		tasklet_hi_schedule(&chip->tasklet_playback);
+	}
+
+	return err;
+}
+
+
+irqreturn_t lx_interrupt(int irq, void *dev_id)
+{
+	struct lx6464es *chip = dev_id;
+	int async_pending, async_escmd;
+	u32 irqsrc;
+
+	spin_lock(&chip->lock);
+
+	snd_printdd("**************************************************\n");
+
+	if (!lx_interrupt_ack(chip, &irqsrc, &async_pending, &async_escmd)) {
+		spin_unlock(&chip->lock);
+		snd_printdd("IRQ_NONE\n");
+		return IRQ_NONE; /* this device did not cause the interrupt */
+	}
+
+	if (irqsrc & MASK_SYS_STATUS_CMD_DONE)
+		goto exit;
+
+#if 0
+	if (irqsrc & MASK_SYS_STATUS_EOBI)
+		snd_printdd(LXP "interrupt: EOBI\n");
+
+	if (irqsrc & MASK_SYS_STATUS_EOBO)
+		snd_printdd(LXP "interrupt: EOBO\n");
+
+	if (irqsrc & MASK_SYS_STATUS_URUN)
+		snd_printdd(LXP "interrupt: URUN\n");
+
+	if (irqsrc & MASK_SYS_STATUS_ORUN)
+		snd_printdd(LXP "interrupt: ORUN\n");
+#endif
+
+	if (async_pending) {
+		u64 notified_in_pipe_mask = 0;
+		u64 notified_out_pipe_mask = 0;
+		int freq_changed;
+		int err;
+
+		/* handle async events */
+		err = lx_interrupt_handle_async_events(chip, irqsrc,
+						       &freq_changed,
+						       &notified_in_pipe_mask,
+						       &notified_out_pipe_mask);
+		if (err)
+			snd_printk(KERN_ERR LXP
+				   "error handling async events\n");
+
+		err = lx_interrupt_handle_audio_transfer(chip,
+							 notified_in_pipe_mask,
+							 notified_out_pipe_mask
+			);
+		if (err)
+			snd_printk(KERN_ERR LXP
+				   "error during audio transfer\n");
+	}
+
+	if (async_escmd) {
+#if 0
+		/* backdoor for ethersound commands
+		 *
+		 * for now, we do not need this
+		 *
+		 * */
+
+		snd_printdd("lx6464es: interrupt requests escmd handling\n");
+#endif
+	}
+
+exit:
+	spin_unlock(&chip->lock);
+	return IRQ_HANDLED;	/* this device caused the interrupt */
+}
+
+
+static void lx_irq_set(struct lx6464es *chip, int enable)
+{
+	u32 reg = lx_plx_reg_read(chip, ePLX_IRQCS);
+
+	/* enable/disable interrupts
+	 *
+	 * Set the Doorbell and PCI interrupt enable bits
+	 *
+	 * */
+	if (enable)
+		reg |=  (IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB);
+	else
+		reg &= ~(IRQCS_ENABLE_PCIIRQ | IRQCS_ENABLE_PCIDB);
+	lx_plx_reg_write(chip, ePLX_IRQCS, reg);
+}
+
+void lx_irq_enable(struct lx6464es *chip)
+{
+	snd_printdd("->lx_irq_enable\n");
+	lx_irq_set(chip, 1);
+}
+
+void lx_irq_disable(struct lx6464es *chip)
+{
+	snd_printdd("->lx_irq_disable\n");
+	lx_irq_set(chip, 0);
+}
diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h
new file mode 100644
index 00000000000..6bd9cbbbc68
--- /dev/null
+++ b/sound/pci/lx6464es/lx_core.h
@@ -0,0 +1,242 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * low-level interface
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX_CORE_H
+#define LX_CORE_H
+
+#include <linux/interrupt.h>
+
+#include "lx_defs.h"
+
+#define REG_CRM_NUMBER		12
+
+struct lx6464es;
+
+/* low-level register access */
+
+/* dsp register access */
+enum {
+	eReg_BASE,
+	eReg_CSM,
+	eReg_CRM1,
+	eReg_CRM2,
+	eReg_CRM3,
+	eReg_CRM4,
+	eReg_CRM5,
+	eReg_CRM6,
+	eReg_CRM7,
+	eReg_CRM8,
+	eReg_CRM9,
+	eReg_CRM10,
+	eReg_CRM11,
+	eReg_CRM12,
+
+	eReg_ICR,
+	eReg_CVR,
+	eReg_ISR,
+	eReg_RXHTXH,
+	eReg_RXMTXM,
+	eReg_RHLTXL,
+	eReg_RESETDSP,
+
+	eReg_CSUF,
+	eReg_CSES,
+	eReg_CRESMSB,
+	eReg_CRESLSB,
+	eReg_ADMACESMSB,
+	eReg_ADMACESLSB,
+	eReg_CONFES,
+
+	eMaxPortLx
+};
+
+unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port);
+void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len);
+void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data);
+void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
+			 u32 len);
+
+/* plx register access */
+enum {
+    ePLX_PCICR,
+
+    ePLX_MBOX0,
+    ePLX_MBOX1,
+    ePLX_MBOX2,
+    ePLX_MBOX3,
+    ePLX_MBOX4,
+    ePLX_MBOX5,
+    ePLX_MBOX6,
+    ePLX_MBOX7,
+
+    ePLX_L2PCIDB,
+    ePLX_IRQCS,
+    ePLX_CHIPSC,
+
+    eMaxPort
+};
+
+unsigned long lx_plx_reg_read(struct lx6464es *chip, int port);
+void lx_plx_reg_write(struct lx6464es *chip, int port, u32 data);
+
+/* rhm */
+struct lx_rmh {
+	u16	cmd_len;	/* length of the command to send (WORDs) */
+	u16	stat_len;	/* length of the status received (WORDs) */
+	u16	dsp_stat;	/* status type, RMP_SSIZE_XXX */
+	u16	cmd_idx;	/* index of the command */
+	u32	cmd[REG_CRM_NUMBER];
+	u32	stat[REG_CRM_NUMBER];
+};
+
+
+/* low-level dsp access */
+int __devinit lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version);
+int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq);
+int lx_dsp_set_granularity(struct lx6464es *chip, u32 gran);
+int lx_dsp_read_async_events(struct lx6464es *chip, u32 *data);
+int lx_dsp_get_mac(struct lx6464es *chip, u8 *mac_address);
+
+
+/* low-level pipe handling */
+int lx_pipe_allocate(struct lx6464es *chip, u32 pipe, int is_capture,
+		     int channels);
+int lx_pipe_release(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_sample_count(struct lx6464es *chip, u32 pipe, int is_capture,
+			 u64 *rsample_count);
+int lx_pipe_state(struct lx6464es *chip, u32 pipe, int is_capture, u16 *rstate);
+int lx_pipe_stop(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_start(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_pause(struct lx6464es *chip, u32 pipe, int is_capture);
+
+int lx_pipe_wait_for_start(struct lx6464es *chip, u32 pipe, int is_capture);
+int lx_pipe_wait_for_idle(struct lx6464es *chip, u32 pipe, int is_capture);
+
+/* low-level stream handling */
+int lx_stream_set_format(struct lx6464es *chip, struct snd_pcm_runtime *runtime,
+			 u32 pipe, int is_capture);
+int lx_stream_state(struct lx6464es *chip, u32 pipe, int is_capture,
+		    int *rstate);
+int lx_stream_sample_position(struct lx6464es *chip, u32 pipe, int is_capture,
+			      u64 *r_bytepos);
+
+int lx_stream_set_state(struct lx6464es *chip, u32 pipe,
+			int is_capture, enum stream_state_t state);
+
+static inline int lx_stream_start(struct lx6464es *chip, u32 pipe,
+				  int is_capture)
+{
+	snd_printdd("->lx_stream_start\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_RUN);
+}
+
+static inline int lx_stream_pause(struct lx6464es *chip, u32 pipe,
+				  int is_capture)
+{
+	snd_printdd("->lx_stream_pause\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_PAUSE);
+}
+
+static inline int lx_stream_stop(struct lx6464es *chip, u32 pipe,
+				 int is_capture)
+{
+	snd_printdd("->lx_stream_stop\n");
+	return lx_stream_set_state(chip, pipe, is_capture, SSTATE_STOP);
+}
+
+/* low-level buffer handling */
+int lx_buffer_ask(struct lx6464es *chip, u32 pipe, int is_capture,
+		  u32 *r_needed, u32 *r_freed, u32 *size_array);
+int lx_buffer_give(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 buffer_size, u32 buf_address_lo, u32 buf_address_hi,
+		   u32 *r_buffer_index);
+int lx_buffer_free(struct lx6464es *chip, u32 pipe, int is_capture,
+		   u32 *r_buffer_size);
+int lx_buffer_cancel(struct lx6464es *chip, u32 pipe, int is_capture,
+		     u32 buffer_index);
+
+/* low-level gain/peak handling */
+int lx_level_unmute(struct lx6464es *chip, int is_capture, int unmute);
+int lx_level_peaks(struct lx6464es *chip, int is_capture, int channels,
+		   u32 *r_levels);
+
+
+/* interrupt handling */
+irqreturn_t lx_interrupt(int irq, void *dev_id);
+void lx_irq_enable(struct lx6464es *chip);
+void lx_irq_disable(struct lx6464es *chip);
+
+void lx_tasklet_capture(unsigned long data);
+void lx_tasklet_playback(unsigned long data);
+
+
+/* Stream Format Header Defines (for LIN and IEEE754) */
+#define HEADER_FMT_BASE		HEADER_FMT_BASE_LIN
+#define HEADER_FMT_BASE_LIN	0xFED00000
+#define HEADER_FMT_BASE_FLOAT	0xFAD00000
+#define HEADER_FMT_MONO		0x00000080 /* bit 23 in header_lo. WARNING: old
+					    * bit 22 is ignored in float
+					    * format */
+#define HEADER_FMT_INTEL	0x00008000
+#define HEADER_FMT_16BITS	0x00002000
+#define HEADER_FMT_24BITS	0x00004000
+#define HEADER_FMT_UPTO11	0x00000200 /* frequency is less or equ. to 11k.
+					    * */
+#define HEADER_FMT_UPTO32	0x00000100 /* frequency is over 11k and less
+					    * then 32k.*/
+
+
+#define BIT_FMP_HEADER          23
+#define BIT_FMP_SD              22
+#define BIT_FMP_MULTICHANNEL    19
+
+#define START_STATE             1
+#define PAUSE_STATE             0
+
+
+
+
+
+/* from PcxAll_e.h */
+/* Start/Pause condition for pipes (PCXStartPipe, PCXPausePipe) */
+#define START_PAUSE_IMMEDIATE           0
+#define START_PAUSE_ON_SYNCHRO          1
+#define START_PAUSE_ON_TIME_CODE        2
+
+
+/* Pipe / Stream state */
+#define START_STATE             1
+#define PAUSE_STATE             0
+
+static inline void unpack_pointer(dma_addr_t ptr, u32 *r_low, u32 *r_high)
+{
+	*r_low = (u32)(ptr & 0xffffffff);
+#if BITS_PER_LONG == 32
+	*r_high = 0;
+#else
+	*r_high = (u32)((u64)ptr>>32);
+#endif
+}
+
+#endif /* LX_CORE_H */
diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h
new file mode 100644
index 00000000000..49d36bdd512
--- /dev/null
+++ b/sound/pci/lx6464es/lx_defs.h
@@ -0,0 +1,376 @@
+/* -*- linux-c -*- *
+ *
+ * ALSA driver for the digigram lx6464es interface
+ * adapted upstream headers
+ *
+ * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef LX_DEFS_H
+#define LX_DEFS_H
+
+/* code adapted from ethersound.h */
+#define	XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
+#define	XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
+					    * [ 44k - ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_44_MAX	0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+#define	XES_FREQ_COUNT8_48_MAX	0x00000F08 /* 25M /
+					    * [ 48k + ( 44.1k + 48k ) / 2 ]
+					    * * 8 */
+
+/* code adapted from LXES_registers.h */
+
+#define IOCR_OUTPUTS_OFFSET 0	/* (rw) offset for the number of OUTs in the
+				 * ConfES register. */
+#define IOCR_INPUTS_OFFSET  8	/* (rw) offset for the number of INs in the
+				 * ConfES register. */
+#define FREQ_RATIO_OFFSET  19	/* (rw) offset for frequency ratio in the
+				 * ConfES register. */
+#define	FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
+				     * sample rate = frequency rate. */
+
+#define CONFES_READ_PART_MASK	0x00070000
+#define CONFES_WRITE_PART_MASK	0x00F80000
+
+/* code adapted from if_drv_mb.h */
+
+#define MASK_SYS_STATUS_ERROR	(1L << 31) /* events that lead to a PCI irq if
+					    * not yet pending */
+#define MASK_SYS_STATUS_URUN	(1L << 30)
+#define MASK_SYS_STATUS_ORUN	(1L << 29)
+#define MASK_SYS_STATUS_EOBO	(1L << 28)
+#define MASK_SYS_STATUS_EOBI	(1L << 27)
+#define MASK_SYS_STATUS_FREQ	(1L << 26)
+#define MASK_SYS_STATUS_ESA	(1L << 25) /* reserved, this is set by the
+					    * XES */
+#define MASK_SYS_STATUS_TIMER	(1L << 24)
+
+#define MASK_SYS_ASYNC_EVENTS	(MASK_SYS_STATUS_ERROR |		\
+				 MASK_SYS_STATUS_URUN  |		\
+				 MASK_SYS_STATUS_ORUN  |		\
+				 MASK_SYS_STATUS_EOBO  |		\
+				 MASK_SYS_STATUS_EOBI  |		\
+				 MASK_SYS_STATUS_FREQ  |		\
+				 MASK_SYS_STATUS_ESA)
+
+#define MASK_SYS_PCI_EVENTS		(MASK_SYS_ASYNC_EVENTS |	\
+					 MASK_SYS_STATUS_TIMER)
+
+#define MASK_SYS_TIMER_COUNT	0x0000FFFF
+
+#define MASK_SYS_STATUS_EOT_PLX		(1L << 22) /* event that remains
+						    * internal: reserved fo end
+						    * of plx dma */
+#define MASK_SYS_STATUS_XES		(1L << 21) /* event that remains
+						    * internal: pending XES
+						    * IRQ */
+#define MASK_SYS_STATUS_CMD_DONE	(1L << 20) /* alternate command
+						    * management: notify driver
+						    * instead of polling */
+
+
+#define MAX_STREAM_BUFFER 5	/* max amount of stream buffers. */
+
+#define MICROBLAZE_IBL_MIN		 32
+#define MICROBLAZE_IBL_DEFAULT	        128
+#define MICROBLAZE_IBL_MAX		512
+/* #define MASK_GRANULARITY		(2*MICROBLAZE_IBL_MAX-1) */
+
+
+
+/* command opcodes, see reference for details */
+
+/*
+ the capture bit position in the object_id field in driver commands
+ depends upon the number of managed channels. For now, 64 IN + 64 OUT are
+ supported. HOwever, the communication protocol forsees 1024 channels, hence
+ bit 10 indicates a capture (input) object).
+*/
+#define ID_IS_CAPTURE (1L << 10)
+#define ID_OFFSET	13	/* object ID is at the 13th bit in the
+				 * 1st command word.*/
+#define ID_CH_MASK    0x3F
+#define OPCODE_OFFSET	24	/* offset of the command opcode in the first
+				 * command word.*/
+
+enum cmd_mb_opcodes {
+	CMD_00_INFO_DEBUG	        = 0x00,
+	CMD_01_GET_SYS_CFG		= 0x01,
+	CMD_02_SET_GRANULARITY		= 0x02,
+	CMD_03_SET_TIMER_IRQ		= 0x03,
+	CMD_04_GET_EVENT		= 0x04,
+	CMD_05_GET_PIPES		= 0x05,
+
+	CMD_06_ALLOCATE_PIPE            = 0x06,
+	CMD_07_RELEASE_PIPE		= 0x07,
+	CMD_08_ASK_BUFFERS		= 0x08,
+	CMD_09_STOP_PIPE		= 0x09,
+	CMD_0A_GET_PIPE_SPL_COUNT	= 0x0a,
+	CMD_0B_TOGGLE_PIPE_STATE	= 0x0b,
+
+	CMD_0C_DEF_STREAM		= 0x0c,
+	CMD_0D_SET_MUTE			= 0x0d,
+	CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
+	CMD_0F_UPDATE_BUFFER		= 0x0f,
+	CMD_10_GET_BUFFER		= 0x10,
+	CMD_11_CANCEL_BUFFER		= 0x11,
+	CMD_12_GET_PEAK			= 0x12,
+	CMD_13_SET_STREAM_STATE		= 0x13,
+	CMD_14_INVALID			= 0x14,
+};
+
+/* pipe states */
+enum pipe_state_t {
+	PSTATE_IDLE	= 0,	/* the pipe is not processed in the XES_IRQ
+				 * (free or stopped, or paused). */
+	PSTATE_RUN	= 1,	/* sustained play/record state. */
+	PSTATE_PURGE	= 2,	/* the ES channels are now off, render pipes do
+				 * not DMA, record pipe do a last DMA. */
+	PSTATE_ACQUIRE	= 3,	/* the ES channels are now on, render pipes do
+				 * not yet increase their sample count, record
+				 * pipes do not DMA. */
+	PSTATE_CLOSING	= 4,	/* the pipe is releasing, and may not yet
+				 * receive an "alloc" command. */
+};
+
+/* stream states */
+enum stream_state_t {
+	SSTATE_STOP	=  0x00,       /* setting to stop resets the stream spl
+					* count.*/
+	SSTATE_RUN	= (0x01 << 0), /* start DMA and spl count handling. */
+	SSTATE_PAUSE	= (0x01 << 1), /* pause DMA and spl count handling. */
+};
+
+/* buffer flags */
+enum buffer_flags {
+	BF_VALID	= 0x80,	/* set if the buffer is valid, clear if free.*/
+	BF_CURRENT	= 0x40,	/* set if this is the current buffer (there is
+				 * always a current buffer).*/
+	BF_NOTIFY_EOB	= 0x20,	/* set if this buffer must cause a PCI event
+				 * when finished.*/
+	BF_CIRCULAR	= 0x10,	/* set if buffer[1] must be copied to buffer[0]
+				 * by the end of this buffer.*/
+	BF_64BITS_ADR	= 0x08,	/* set if the hi part of the address is valid.*/
+	BF_xx		= 0x04,	/* future extension.*/
+	BF_EOB		= 0x02,	/* set if finished, but not yet free.*/
+	BF_PAUSE	= 0x01,	/* pause stream at buffer end.*/
+	BF_ZERO		= 0x00,	/* no flags (init).*/
+};
+
+/**
+*	Stream Flags definitions
+*/
+enum stream_flags {
+	SF_ZERO		= 0x00000000, /* no flags (stream invalid). */
+	SF_VALID	= 0x10000000, /* the stream has a valid DMA_conf
+				       * info (setstreamformat). */
+	SF_XRUN		= 0x20000000, /* the stream is un x-run state. */
+	SF_START	= 0x40000000, /* the DMA is running.*/
+	SF_ASIO		= 0x80000000, /* ASIO.*/
+};
+
+
+#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
+#define PSTATE_OFFSET             28 /* 4 MSBits are status bits */
+
+
+#define MASK_STREAM_HAS_MAPPING	(1L << 12)
+#define MASK_STREAM_IS_ASIO	(1L <<  9)
+#define STREAM_FMT_OFFSET	10   /* the stream fmt bits start at the 10th
+				      * bit in the command word. */
+
+#define STREAM_FMT_16b          0x02
+#define STREAM_FMT_intel        0x01
+
+#define FREQ_FIELD_OFFSET	15  /* offset of the freq field in the response
+				     * word */
+
+#define BUFF_FLAGS_OFFSET	  24 /*  offset of the buffer flags in the
+				      *  response word. */
+#define MASK_DATA_SIZE	  0x00FFFFFF /* this must match the field size of
+				      * datasize in the buffer_t structure. */
+
+#define MASK_BUFFER_ID	        0xFF /* the cancel command awaits a buffer ID,
+				      * may be 0xFF for "current". */
+
+
+/* code adapted from PcxErr_e.h */
+
+/* Bits masks */
+
+#define ERROR_MASK              0x8000
+
+#define SOURCE_MASK             0x7800
+
+#define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
+#define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
+#define E_SOURCE_API            0x1000 /* 2 >> 1 */
+/* Error tools */
+#define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
+/* Error pcxaudio */
+#define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
+/* Error virtual pcx */
+#define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
+/* Error dispatcher */
+#define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
+/* Error from CobraNet firmware */
+#define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */
+
+#define E_SOURCE_USER           0x7800
+
+#define CLASS_MASK              0x0700
+
+#define CODE_MASK               0x00FF
+
+/* Bits values */
+
+/* Values for the error/warning bit */
+#define ERROR_VALUE             0x8000
+#define WARNING_VALUE           0x0000
+
+/* Class values */
+#define E_CLASS_GENERAL                  0x0000
+#define E_CLASS_INVALID_CMD              0x0100
+#define E_CLASS_INVALID_STD_OBJECT       0x0200
+#define E_CLASS_RSRC_IMPOSSIBLE          0x0300
+#define E_CLASS_WRONG_CONTEXT            0x0400
+#define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
+#define E_CLASS_REAL_TIME_ERROR          0x0600
+#define E_CLASS_DIRECTSHOW               0x0700
+#define E_CLASS_FREE                     0x0700
+
+
+/* Complete DRV error code for the general class */
+#define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
+#define ED_CONCURRENCY                  (ED_GN | 0x01)
+#define ED_DSP_CRASHED                  (ED_GN | 0x02)
+#define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
+#define ED_NOT_INSTALLED                (ED_GN | 0x04)
+#define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
+#define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
+#define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
+#define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
+#define ED_CANCELLED                    (ED_GN | 0x09)
+#define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
+#define ED_INVALID_ADDRESS              (ED_GN | 0x11)
+#define ED_DSP_CORRUPTED                (ED_GN | 0x12)
+#define ED_PENDING_OPERATION            (ED_GN | 0x13)
+#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
+#define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
+#define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
+#define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
+#define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
+#define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
+#define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
+#define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
+#define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
+#define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
+#define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
+#define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
+#define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
+#define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
+#define ED_FILE_ERROR                       (ED_GN | 0x22)
+#define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
+#define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
+#define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
+#define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
+#define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
+#define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
+#define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */
+
+#define ED_READ_FILE_ALREADY_OPENED	    (ED_GN | 0x2a) /* <- Decalage
+							    * pour RCX
+							    * (old 0x28)
+							    * */
+#define ED_READ_FILE_INVALID_COMMAND	    (ED_GN | 0x2b) /* ~ */
+#define ED_READ_FILE_INVALID_PARAMETER	    (ED_GN | 0x2c) /* ~ */
+#define ED_READ_FILE_ALREADY_CLOSED	    (ED_GN | 0x2d) /* ~ */
+#define ED_READ_FILE_NO_INFORMATION	    (ED_GN | 0x2e) /* ~ */
+#define ED_READ_FILE_INVALID_HANDLE	    (ED_GN | 0x2f) /* ~ */
+#define ED_READ_FILE_END_OF_FILE	    (ED_GN | 0x30) /* ~ */
+#define ED_READ_FILE_ERROR	            (ED_GN | 0x31) /* ~ */
+
+#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
+							     * PCX (old 0x14) */
+#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
+#define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
+#define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
+#define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */
+
+#define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)
+
+#define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)
+
+/* Complete DRV error code for real time class */
+#define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
+#define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
+#define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
+#define ED_STREAM_OVERRUN               (ED_RT | 0x03)
+#define ED_DSP_BUSY                     (ED_RT | 0x04)
+#define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
+#define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
+#define ED_XILINX_ERROR                 (ED_RT | 0x07)
+#define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)
+
+/* Complete BOARD error code for the invaid standard object class */
+#define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
+			 E_CLASS_INVALID_STD_OBJECT)
+#define EB_INVALID_EFFECT               (EB_ISO | 0x00)
+#define EB_INVALID_PIPE                 (EB_ISO | 0x40)
+#define EB_INVALID_STREAM               (EB_ISO | 0x80)
+#define EB_INVALID_AUDIO                (EB_ISO | 0xC0)
+
+/* Complete BOARD error code for impossible resource allocation class */
+#define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
+#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
+#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)
+
+#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE		\
+	EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
+#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE			\
+	EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE
+
+#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
+#define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
+#define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
+#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
+#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
+#define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
+#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
+#define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
+#define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
+#define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
+#define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
+#define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
+#define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)
+
+/* Complete BOARD error code for wrong call context class */
+#define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
+#define EB_CMD_REFUSED                  (EB_WCC | 0x00)
+#define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
+#define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
+#define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
+#define EB_CSE_REFUSED                  (EB_WCC | 0xFF)
+
+
+
+
+#endif /* LX_DEFS_H */
diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c
index c262049961e..3b5ca70c9d4 100644
--- a/sound/pci/oxygen/oxygen_pcm.c
+++ b/sound/pci/oxygen/oxygen_pcm.c
@@ -487,10 +487,14 @@ static int oxygen_hw_free(struct snd_pcm_substream *substream)
 {
 	struct oxygen *chip = snd_pcm_substream_chip(substream);
 	unsigned int channel = oxygen_substream_channel(substream);
+	unsigned int channel_mask = 1 << channel;
 
 	spin_lock_irq(&chip->reg_lock);
-	chip->interrupt_mask &= ~(1 << channel);
+	chip->interrupt_mask &= ~channel_mask;
 	oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask);
+
+	oxygen_set_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask);
+	oxygen_clear_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask);
 	spin_unlock_irq(&chip->reg_lock);
 
 	return snd_pcm_lib_free_pages(substream);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bc5ce11c8b1..bf971f7cfdc 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -113,8 +113,8 @@
  */
 
 /*
- * Xonar Essence STX
- * -----------------
+ * Xonar Essence ST (Deluxe)/STX
+ * -----------------------------
  *
  * CMI8788:
  *
@@ -180,6 +180,8 @@ enum {
 	MODEL_DX,
 	MODEL_HDAV,	/* without daughterboard */
 	MODEL_HDAV_H6,	/* with H6 daughterboard */
+	MODEL_ST,
+	MODEL_ST_H6,
 	MODEL_STX,
 };
 
@@ -188,8 +190,10 @@ static struct pci_device_id xonar_ids[] __devinitdata = {
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8327), .driver_data = MODEL_DX },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
 	{ OXYGEN_PCI_SUBID(0x1043, 0x835c), .driver_data = MODEL_STX },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x835d), .driver_data = MODEL_ST },
 	{ OXYGEN_PCI_SUBID_BROKEN_EEPROM },
 	{ }
 };
@@ -210,9 +214,9 @@ MODULE_DEVICE_TABLE(pci, xonar_ids);
 #define GPIO_DX_FRONT_PANEL	0x0002
 #define GPIO_DX_INPUT_ROUTE	0x0100
 
-#define GPIO_HDAV_DB_MASK	0x0030
-#define GPIO_HDAV_DB_H6		0x0000
-#define GPIO_HDAV_DB_XX		0x0020
+#define GPIO_DB_MASK		0x0030
+#define GPIO_DB_H6		0x0000
+#define GPIO_DB_XX		0x0020
 
 #define GPIO_ST_HP_REAR		0x0002
 #define GPIO_ST_HP		0x0080
@@ -530,7 +534,7 @@ static void xonar_hdav_init(struct oxygen *chip)
 	snd_component_add(chip->card, "CS5381");
 }
 
-static void xonar_stx_init(struct oxygen *chip)
+static void xonar_st_init(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
 
@@ -539,12 +543,11 @@ static void xonar_stx_init(struct oxygen *chip)
 		       OXYGEN_2WIRE_INTERRUPT_MASK |
 		       OXYGEN_2WIRE_SPEED_FAST);
 
+	if (chip->model.private_data == MODEL_ST_H6)
+		chip->model.dac_channels = 8;
 	data->anti_pop_delay = 100;
-	data->dacs = 1;
+	data->dacs = chip->model.private_data == MODEL_ST_H6 ? 4 : 1;
 	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
 	data->pcm1796_oversampling = PCM1796_OS_64;
 
 	pcm1796_init(chip);
@@ -560,6 +563,17 @@ static void xonar_stx_init(struct oxygen *chip)
 	snd_component_add(chip->card, "CS5381");
 }
 
+static void xonar_stx_init(struct oxygen *chip)
+{
+	struct xonar_data *data = chip->model_data;
+
+	data->ext_power_reg = OXYGEN_GPI_DATA;
+	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->ext_power_bit = GPI_DX_EXT_POWER;
+
+	xonar_st_init(chip);
+}
+
 static void xonar_disable_output(struct oxygen *chip)
 {
 	struct xonar_data *data = chip->model_data;
@@ -1021,7 +1035,8 @@ static const struct oxygen_model model_xonar_hdav = {
 	.model_data_size = sizeof(struct xonar_data),
 	.device_config = PLAYBACK_0_TO_I2S |
 			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2,
+			 CAPTURE_0_FROM_I2S_2 |
+			 CAPTURE_1_FROM_SPDIF,
 	.dac_channels = 8,
 	.dac_volume_min = 255 - 2*60,
 	.dac_volume_max = 255,
@@ -1034,7 +1049,7 @@ static const struct oxygen_model model_xonar_hdav = {
 static const struct oxygen_model model_xonar_st = {
 	.longname = "Asus Virtuoso 100",
 	.chip = "AV200",
-	.init = xonar_stx_init,
+	.init = xonar_st_init,
 	.control_filter = xonar_st_control_filter,
 	.mixer_init = xonar_st_mixer_init,
 	.cleanup = xonar_st_cleanup,
@@ -1067,6 +1082,7 @@ static int __devinit get_xonar_model(struct oxygen *chip,
 		[MODEL_D2]	= &model_xonar_d2,
 		[MODEL_D2X]	= &model_xonar_d2,
 		[MODEL_HDAV]	= &model_xonar_hdav,
+		[MODEL_ST]	= &model_xonar_st,
 		[MODEL_STX]	= &model_xonar_st,
 	};
 	static const char *const names[] = {
@@ -1076,6 +1092,8 @@ static int __devinit get_xonar_model(struct oxygen *chip,
 		[MODEL_D2X]	= "Xonar D2X",
 		[MODEL_HDAV]	= "Xonar HDAV1.3",
 		[MODEL_HDAV_H6]	= "Xonar HDAV1.3+H6",
+		[MODEL_ST]	= "Xonar Essence ST",
+		[MODEL_ST_H6]	= "Xonar Essence ST+H6",
 		[MODEL_STX]	= "Xonar Essence STX",
 	};
 	unsigned int model = id->driver_data;
@@ -1092,21 +1110,27 @@ static int __devinit get_xonar_model(struct oxygen *chip,
 		chip->model.init = xonar_dx_init;
 		break;
 	case MODEL_HDAV:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL,
-				    GPIO_HDAV_DB_MASK);
-		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) &
-			GPIO_HDAV_DB_MASK) {
-		case GPIO_HDAV_DB_H6:
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		case GPIO_DB_H6:
 			model = MODEL_HDAV_H6;
 			break;
-		case GPIO_HDAV_DB_XX:
+		case GPIO_DB_XX:
 			snd_printk(KERN_ERR "unknown daughterboard\n");
 			return -ENODEV;
 		}
 		break;
+	case MODEL_ST:
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		case GPIO_DB_H6:
+			model = MODEL_ST_H6;
+			break;
+		}
+		break;
 	case MODEL_STX:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL,
-				    GPIO_HDAV_DB_MASK);
+		chip->model.init = xonar_stx_init;
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
 		break;
 	}
 
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 6f1034417a0..235a71e5ac8 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -507,41 +507,19 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip);
  */
 
 static struct pci_device_id snd_riptide_ids[] = {
-	{
-	 .vendor = 0x127a,.device = 0x4310,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4320,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4330,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4340,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
+	{ PCI_DEVICE(0x127a, 0x4310) },
+	{ PCI_DEVICE(0x127a, 0x4320) },
+	{ PCI_DEVICE(0x127a, 0x4330) },
+	{ PCI_DEVICE(0x127a, 0x4340) },
 	{0,},
 };
 
 #ifdef SUPPORT_JOYSTICK
 static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = {
-	{
-	 .vendor = 0x127a,.device = 0x4312,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{
-	 .vendor = 0x127a,.device = 0x4322,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{.vendor = 0x127a,.device = 0x4332,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
-	{.vendor = 0x127a,.device = 0x4342,
-	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
-	 },
+	{ PCI_DEVICE(0x127a, 0x4312) },
+	{ PCI_DEVICE(0x127a, 0x4322) },
+	{ PCI_DEVICE(0x127a, 0x4332) },
+	{ PCI_DEVICE(0x127a, 0x4342) },
 	{0,},
 };
 #endif
@@ -889,7 +867,7 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
 	spin_lock_irqsave(&cif->lock, irqflags);
 	while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport))
 		udelay(10);
-	if (i >= CMDIF_TIMEOUT) {
+	if (i > CMDIF_TIMEOUT) {
 		err = -EBUSY;
 		goto errout;
 	}
@@ -907,8 +885,10 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
 			WRITE_PORT_ULONG(cmdport->data1, cmd);	/* write cmd */
 			if ((flags & RESP) && ret) {
 				while (!IS_DATF(cmdport) &&
-				       time++ < CMDIF_TIMEOUT)
+				       time < CMDIF_TIMEOUT) {
 					udelay(10);
+					time++;
+				}
 				if (time < CMDIF_TIMEOUT) {	/* read response */
 					ret->retlongs[0] =
 					    READ_PORT_ULONG(cmdport->data1);
@@ -1207,12 +1187,79 @@ static int riptide_resume(struct pci_dev *pci)
 }
 #endif
 
+static int try_to_load_firmware(struct cmdif *cif, struct snd_riptide *chip)
+{
+	union firmware_version firmware = { .ret = CMDRET_ZERO };
+	int i, timeout, err;
+
+	for (i = 0; i < 2; i++) {
+		WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0);
+		WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0);
+	}
+	SET_GRESET(cif->hwport);
+	udelay(100);
+	UNSET_GRESET(cif->hwport);
+	udelay(100);
+
+	for (timeout = 100000; --timeout; udelay(10)) {
+		if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport))
+			break;
+	}
+	if (!timeout) {
+		snd_printk(KERN_ERR
+			   "Riptide: device not ready, audio status: 0x%x "
+			   "ready: %d gerr: %d\n",
+			   READ_AUDIO_STATUS(cif->hwport),
+			   IS_READY(cif->hwport), IS_GERR(cif->hwport));
+		return -EIO;
+	} else {
+		snd_printdd
+			("Riptide: audio status: 0x%x ready: %d gerr: %d\n",
+			 READ_AUDIO_STATUS(cif->hwport),
+			 IS_READY(cif->hwport), IS_GERR(cif->hwport));
+	}
+
+	SEND_GETV(cif, &firmware.ret);
+	snd_printdd("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n",
+		    firmware.firmware.ASIC, firmware.firmware.CODEC,
+		    firmware.firmware.AUXDSP, firmware.firmware.PROG);
+
+	for (i = 0; i < FIRMWARE_VERSIONS; i++) {
+		if (!memcmp(&firmware_versions[i], &firmware, sizeof(firmware)))
+			break;
+	}
+	if (i >= FIRMWARE_VERSIONS)
+		return 0; /* no match */
+
+	if (!chip)
+		return 1; /* OK */
+
+	snd_printdd("Writing Firmware\n");
+	if (!chip->fw_entry) {
+		err = request_firmware(&chip->fw_entry, "riptide.hex",
+				       &chip->pci->dev);
+		if (err) {
+			snd_printk(KERN_ERR
+				   "Riptide: Firmware not available %d\n", err);
+			return -EIO;
+		}
+	}
+	err = loadfirmware(cif, chip->fw_entry->data, chip->fw_entry->size);
+	if (err) {
+		snd_printk(KERN_ERR
+			   "Riptide: Could not load firmware %d\n", err);
+		return err;
+	}
+
+	chip->firmware = firmware;
+
+	return 1; /* OK */
+}
+
 static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 {
-	int timeout, tries;
 	union cmdret rptr = CMDRET_ZERO;
-	union firmware_version firmware;
-	int i, j, err, has_firmware;
+	int err, tries;
 
 	if (!cif)
 		return -EINVAL;
@@ -1225,75 +1272,11 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 	cif->is_reset = 0;
 
 	tries = RESET_TRIES;
-	has_firmware = 0;
-	while (has_firmware == 0 && tries-- > 0) {
-		for (i = 0; i < 2; i++) {
-			WRITE_PORT_ULONG(cif->hwport->port[i].data1, 0);
-			WRITE_PORT_ULONG(cif->hwport->port[i].data2, 0);
-		}
-		SET_GRESET(cif->hwport);
-		udelay(100);
-		UNSET_GRESET(cif->hwport);
-		udelay(100);
-
-		for (timeout = 100000; --timeout; udelay(10)) {
-			if (IS_READY(cif->hwport) && !IS_GERR(cif->hwport))
-				break;
-		}
-		if (timeout == 0) {
-			snd_printk(KERN_ERR
-				   "Riptide: device not ready, audio status: 0x%x ready: %d gerr: %d\n",
-				   READ_AUDIO_STATUS(cif->hwport),
-				   IS_READY(cif->hwport), IS_GERR(cif->hwport));
-			return -EIO;
-		} else {
-			snd_printdd
-			    ("Riptide: audio status: 0x%x ready: %d gerr: %d\n",
-			     READ_AUDIO_STATUS(cif->hwport),
-			     IS_READY(cif->hwport), IS_GERR(cif->hwport));
-		}
-
-		SEND_GETV(cif, &rptr);
-		for (i = 0; i < 4; i++)
-			firmware.ret.retwords[i] = rptr.retwords[i];
-
-		snd_printdd
-		    ("Firmware version: ASIC: %d CODEC %d AUXDSP %d PROG %d\n",
-		     firmware.firmware.ASIC, firmware.firmware.CODEC,
-		     firmware.firmware.AUXDSP, firmware.firmware.PROG);
-
-		for (j = 0; j < FIRMWARE_VERSIONS; j++) {
-			has_firmware = 1;
-			for (i = 0; i < 4; i++) {
-				if (firmware_versions[j].ret.retwords[i] !=
-				    firmware.ret.retwords[i])
-					has_firmware = 0;
-			}
-			if (has_firmware)
-				break;
-		}
-
-		if (chip != NULL && has_firmware == 0) {
-			snd_printdd("Writing Firmware\n");
-			if (!chip->fw_entry) {
-				if ((err =
-				     request_firmware(&chip->fw_entry,
-						      "riptide.hex",
-						      &chip->pci->dev)) != 0) {
-					snd_printk(KERN_ERR
-						   "Riptide: Firmware not available %d\n",
-						   err);
-					return -EIO;
-				}
-			}
-			err = loadfirmware(cif, chip->fw_entry->data,
-					   chip->fw_entry->size);
-			if (err)
-				snd_printk(KERN_ERR
-					   "Riptide: Could not load firmware %d\n",
-					   err);
-		}
-	}
+	do {
+		err = try_to_load_firmware(cif, chip);
+		if (err < 0)
+			return err;
+	} while (!err && --tries);
 
 	SEND_SACR(cif, 0, AC97_RESET);
 	SEND_RACR(cif, AC97_RESET, &rptr);
@@ -1335,11 +1318,6 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip)
 	SET_AIE(cif->hwport);
 	SET_AIACK(cif->hwport);
 	cif->is_reset = 1;
-	if (chip) {
-		for (i = 0; i < 4; i++)
-			chip->firmware.ret.retwords[i] =
-			    firmware.ret.retwords[i];
-	}
 
 	return 0;
 }
@@ -1454,7 +1432,7 @@ static int snd_riptide_trigger(struct snd_pcm_substream *substream, int cmd)
 			SEND_GPOS(cif, 0, data->id, &rptr);
 			udelay(1);
 		} while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY);
-		if (j >= MAX_WRITE_RETRY)
+		if (j > MAX_WRITE_RETRY)
 			snd_printk(KERN_ERR "Riptide: Could not stop stream!");
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1783,7 +1761,7 @@ snd_riptide_codec_write(struct snd_ac97 *ac97, unsigned short reg,
 		SEND_SACR(cif, val, reg);
 		SEND_RACR(cif, reg, &rptr);
 	} while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY);
-	if (i == MAX_WRITE_RETRY)
+	if (i > MAX_WRITE_RETRY)
 		snd_printdd("Write AC97 reg failed\n");
 }
 
@@ -2036,14 +2014,12 @@ static int __devinit snd_riptide_mixer(struct snd_riptide *chip)
 }
 
 #ifdef SUPPORT_JOYSTICK
-static int have_joystick;
-static struct pci_dev *riptide_gameport_pci;
-static struct gameport *riptide_gameport;
 
 static int __devinit
 snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {
 	static int dev;
+	struct gameport *gameport;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
@@ -2052,36 +2028,33 @@ snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 		return -ENOENT;
 	}
 
-	if (joystick_port[dev]) {
-		riptide_gameport = gameport_allocate_port();
-		if (riptide_gameport) {
-			if (!request_region
-			    (joystick_port[dev], 8, "Riptide gameport")) {
-				snd_printk(KERN_WARNING
-					   "Riptide: cannot grab gameport 0x%x\n",
-					   joystick_port[dev]);
-				gameport_free_port(riptide_gameport);
-				riptide_gameport = NULL;
-			} else {
-				riptide_gameport_pci = pci;
-				riptide_gameport->io = joystick_port[dev];
-				gameport_register_port(riptide_gameport);
-			}
-		}
+	if (!joystick_port[dev++])
+		return 0;
+
+	gameport = gameport_allocate_port();
+	if (!gameport)
+		return -ENOMEM;
+	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {
+		snd_printk(KERN_WARNING
+			   "Riptide: cannot grab gameport 0x%x\n",
+			   joystick_port[dev]);
+		gameport_free_port(gameport);
+		return -EBUSY;
 	}
-	dev++;
+
+	gameport->io = joystick_port[dev];
+	gameport_register_port(gameport);
+	pci_set_drvdata(pci, gameport);
 	return 0;
 }
 
 static void __devexit snd_riptide_joystick_remove(struct pci_dev *pci)
 {
-	if (riptide_gameport) {
-		if (riptide_gameport_pci == pci) {
-			release_region(riptide_gameport->io, 8);
-			riptide_gameport_pci = NULL;
-			gameport_unregister_port(riptide_gameport);
-			riptide_gameport = NULL;
-		}
+	struct gameport *gameport = pci_get_drvdata(pci);
+	if (gameport) {
+		release_region(gameport->io, 8);
+		gameport_unregister_port(gameport);
+		pci_set_drvdata(pci, NULL);
 	}
 }
 #endif
@@ -2092,8 +2065,8 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 	static int dev;
 	struct snd_card *card;
 	struct snd_riptide *chip;
-	unsigned short addr;
-	int err = 0;
+	unsigned short val;
+	int err;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
@@ -2105,60 +2078,63 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 	if (err < 0)
 		return err;
-	if ((err = snd_riptide_create(card, pci, &chip)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_riptide_create(card, pci, &chip);
+	if (err < 0)
+		goto error;
 	card->private_data = chip;
-	if ((err = snd_riptide_pcm(chip, 0, NULL)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	if ((err = snd_riptide_mixer(chip)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, LEGACY_ENABLE_ALL
-			      | (opl3_port[dev] ? LEGACY_ENABLE_FM : 0)
+	err = snd_riptide_pcm(chip, 0, NULL);
+	if (err < 0)
+		goto error;
+	err = snd_riptide_mixer(chip);
+	if (err < 0)
+		goto error;
+
+	val = LEGACY_ENABLE_ALL;
+	if (opl3_port[dev])
+		val |= LEGACY_ENABLE_FM;
 #ifdef SUPPORT_JOYSTICK
-			      | (joystick_port[dev] ? LEGACY_ENABLE_GAMEPORT :
-				 0)
+	if (joystick_port[dev])
+		val |= LEGACY_ENABLE_GAMEPORT;
 #endif
-			      | (mpu_port[dev]
-				 ? (LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU) :
-				 0)
-			      | ((chip->irq << 4) & 0xF0));
-	if ((addr = mpu_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, addr);
-		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
-					       addr, 0, chip->irq, 0,
-					       &chip->rmidi)) < 0)
+	if (mpu_port[dev])
+		val |= LEGACY_ENABLE_MPU_INT | LEGACY_ENABLE_MPU;
+	val |= (chip->irq << 4) & 0xf0;
+	pci_write_config_word(chip->pci, PCI_EXT_Legacy_Mask, val);
+	if (mpu_port[dev]) {
+		val = mpu_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
+		err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
+					  val, 0, chip->irq, 0,
+					  &chip->rmidi);
+		if (err < 0)
 			snd_printk(KERN_WARNING
 				   "Riptide: Can't Allocate MPU at 0x%x\n",
-				   addr);
+				   val);
 		else
-			chip->mpuaddr = addr;
+			chip->mpuaddr = val;
 	}
-	if ((addr = opl3_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_FM_Base, addr);
-		if ((err = snd_opl3_create(card, addr, addr + 2,
-					   OPL3_HW_RIPTIDE, 0,
-					   &chip->opl3)) < 0)
+	if (opl3_port[dev]) {
+		val = opl3_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_FM_Base, val);
+		err = snd_opl3_create(card, val, val + 2,
+				      OPL3_HW_RIPTIDE, 0, &chip->opl3);
+		if (err < 0)
 			snd_printk(KERN_WARNING
 				   "Riptide: Can't Allocate OPL3 at 0x%x\n",
-				   addr);
+				   val);
 		else {
-			chip->opladdr = addr;
-			if ((err =
-			     snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL)) < 0)
+			chip->opladdr = val;
+			err = snd_opl3_hwdep_new(chip->opl3, 0, 1, NULL);
+			if (err < 0)
 				snd_printk(KERN_WARNING
 					   "Riptide: Can't Allocate OPL3-HWDEP\n");
 		}
 	}
 #ifdef SUPPORT_JOYSTICK
-	if ((addr = joystick_port[dev]) != 0) {
-		pci_write_config_word(chip->pci, PCI_EXT_Game_Base, addr);
-		chip->gameaddr = addr;
+	if (joystick_port[dev]) {
+		val = joystick_port[dev];
+		pci_write_config_word(chip->pci, PCI_EXT_Game_Base, val);
+		chip->gameaddr = val;
 	}
 #endif
 
@@ -2176,13 +2152,16 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 		 chip->opladdr);
 #endif
 	snd_riptide_proc_init(chip);
-	if ((err = snd_card_register(card)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
 	pci_set_drvdata(pci, card);
 	dev++;
 	return 0;
+
+ error:
+	snd_card_free(card);
+	return err;
 }
 
 static void __devexit snd_card_riptide_remove(struct pci_dev *pci)
@@ -2214,14 +2193,11 @@ static struct pci_driver joystick_driver = {
 static int __init alsa_card_riptide_init(void)
 {
 	int err;
-	if ((err = pci_register_driver(&driver)) < 0)
+	err = pci_register_driver(&driver);
+	if (err < 0)
 		return err;
 #if defined(SUPPORT_JOYSTICK)
-	if (pci_register_driver(&joystick_driver) < 0) {
-		have_joystick = 0;
-		snd_printk(KERN_INFO "no joystick found\n");
-	} else
-		have_joystick = 1;
+	pci_register_driver(&joystick_driver);
 #endif
 	return 0;
 }
@@ -2230,8 +2206,7 @@ static void __exit alsa_card_riptide_exit(void)
 {
 	pci_unregister_driver(&driver);
 #if defined(SUPPORT_JOYSTICK)
-	if (have_joystick)
-		pci_unregister_driver(&joystick_driver);
+	pci_unregister_driver(&joystick_driver);
 #endif
 }
 
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 314e73531bd..3da5c029f93 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/firmware.h>
 #include <linux/moduleparam.h>
+#include <linux/math64.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
@@ -402,9 +403,9 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin");
 #define HDSP_DMA_AREA_BYTES ((HDSP_MAX_CHANNELS+1) * HDSP_CHANNEL_BUFFER_BYTES)
 #define HDSP_DMA_AREA_KILOBYTES (HDSP_DMA_AREA_BYTES/1024)
 
-/* use hotplug firmeare loader? */
+/* use hotplug firmware loader? */
 #if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
-#if !defined(HDSP_USE_HWDEP_LOADER) && !defined(CONFIG_SND_HDSP)
+#if !defined(HDSP_USE_HWDEP_LOADER)
 #define HDSP_FW_LOADER
 #endif
 #endif
@@ -1047,7 +1048,6 @@ static int hdsp_set_interrupt_interval(struct hdsp *s, unsigned int frames)
 static void hdsp_set_dds_value(struct hdsp *hdsp, int rate)
 {
 	u64 n;
-	u32 r;
 
 	if (rate >= 112000)
 		rate /= 4;
@@ -1055,7 +1055,7 @@ static void hdsp_set_dds_value(struct hdsp *hdsp, int rate)
 		rate /= 2;
 
 	n = DDS_NUMERATOR;
-	div64_32(&n, rate, &r);
+	n = div_u64(n, rate);
 	/* n should be less than 2^32 for being written to FREQ register */
 	snd_BUG_ON(n >> 32);
 	/* HDSP_freqReg and HDSP_resetPointer are the same, so keep the DDS
@@ -3097,7 +3097,6 @@ static int snd_hdsp_get_adat_sync_check(struct snd_kcontrol *kcontrol, struct sn
 static int hdsp_dds_offset(struct hdsp *hdsp)
 {
 	u64 n;
-	u32 r;
 	unsigned int dds_value = hdsp->dds_value;
 	int system_sample_rate = hdsp->system_sample_rate;
 
@@ -3109,7 +3108,7 @@ static int hdsp_dds_offset(struct hdsp *hdsp)
 	 * dds_value = n / rate
 	 * rate = n / dds_value
 	 */
-	div64_32(&n, dds_value, &r);
+	n = div_u64(n, dds_value);
 	if (system_sample_rate >= 112000)
 		n *= 4;
 	else if (system_sample_rate >= 56000)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index bac2dc0c5d8..0dce331a2a3 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -29,6 +29,7 @@
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/math64.h>
 #include <asm/io.h>
 
 #include <sound/core.h>
@@ -831,7 +832,6 @@ static int hdspm_set_interrupt_interval(struct hdspm * s, unsigned int frames)
 static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
 {
 	u64 n;
-	u32 r;
 	
 	if (rate >= 112000)
 		rate /= 4;
@@ -844,7 +844,7 @@ static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
         */	   
 	/* n = 104857600000000ULL; */ /*  =  2^20 * 10^8 */
 	n = 110100480000000ULL;    /* Value checked for AES32 and MADI */
-	div64_32(&n, rate, &r);
+	n = div_u64(n, rate);
 	/* n should be less than 2^32 for being written to FREQ register */
 	snd_BUG_ON(n >> 32);
 	hdspm_write(hdspm, HDSPM_freqReg, (u32)n);
diff --git a/sound/pci/sis7019.h b/sound/pci/sis7019.h
index 013b6739a74..bc8c7681940 100644
--- a/sound/pci/sis7019.h
+++ b/sound/pci/sis7019.h
@@ -203,7 +203,7 @@
 #define SIS_WEISR_B	0xac
 
 
-/* Playback DMA parameters (paramter RAM) */
+/* Playback DMA parameters (parameter RAM) */
 #define SIS_PLAY_DMA_OFFSET	0x0000
 #define SIS_PLAY_DMA_SIZE	0x10
 #define SIS_PLAY_DMA_ADDR(addr, num) \
@@ -228,7 +228,7 @@
 #define		SIS_PLAY_DMA_SSO_MASK		0xffff0000
 #define		SIS_PLAY_DMA_ESO_MASK		0x0000ffff
 
-/* Capture DMA parameters (paramter RAM) */
+/* Capture DMA parameters (parameter RAM) */
 #define SIS_CAPTURE_DMA_OFFSET	0x0800
 #define SIS_CAPTURE_DMA_SIZE	0x10
 #define SIS_CAPTURE_DMA_ADDR(addr, num) \
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index c0efe449111..6416d3f0c7b 100644
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x
 	unsigned int port;
 	const unsigned char *image;
 
-	/* XILINX reset (wait at least 1 milisecond between reset on and off). */
+	/* XILINX reset (wait at least 1 millisecond between reset on and off). */
 	vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
 	vx_inl(chip, CNTRL);
 	msleep(10);
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 80df9b1f651..2cc0eda4f20 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -477,7 +477,7 @@ static int snd_pmac_awacs_put_master_amp(struct snd_kcontrol *kcontrol,
 #define AMP_CH_SPK	0
 #define AMP_CH_HD	1
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "PC Speaker Playback Volume",
 	  .info = snd_pmac_awacs_info_volume_amp,
@@ -514,7 +514,7 @@ static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Headphone Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
@@ -523,7 +523,7 @@ static struct snd_kcontrol_new snd_pmac_awacs_amp_hp_sw __initdata = {
 	.private_value = AMP_CH_HD,
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "PC Speaker Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
@@ -595,46 +595,46 @@ static int snd_pmac_screamer_mic_boost_put(struct snd_kcontrol *kcontrol,
 /*
  * lists of mixer elements
  */
-static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __devinitdata = {
 	AWACS_SWITCH("Master Capture Switch", 1, SHIFT_LOOPTHRU, 0),
 	AWACS_VOLUME("Master Capture Volume", 0, 4, 0),
 /*	AWACS_SWITCH("Unknown Playback Switch", 6, SHIFT_PAROUT0, 0), */
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __devinitdata = {
 	AWACS_VOLUME("Master Playback Volume", 2, 6, 1),
 	AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_LINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __devinitdata = {
 	AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_VOLUME("Master Playback Volume", 5, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __devinitdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __devinitdata = {
 	AWACS_VOLUME("Headphone Playback Volume", 2, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __devinitdata = {
 	AWACS_VOLUME("Master Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
@@ -642,34 +642,34 @@ static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = {
 /* FIXME: is this correct order?
  * screamer (powerbook G3 pismo) seems to have different bits...
  */
-static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers2[] __devinitdata = {
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_LINE, 0),
 	AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_MIC, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __devinitdata = {
 	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
 	AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_LINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __devinitdata = {
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw __devinitdata =
 AWACS_SWITCH("Master Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __devinitdata =
 AWACS_SWITCH("Line out Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __devinitdata =
 AWACS_SWITCH("Headphone Playback Switch", 1, SHIFT_HDMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __devinitdata = {
 	AWACS_SWITCH("Mic Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Mic Boost Capture Volume",
 	  .info = snd_pmac_screamer_mic_boost_info,
@@ -678,34 +678,34 @@ static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __initdata =
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 	AWACS_SWITCH("CD Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __initdata =
+static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __devinitdata =
 {
 	AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0),
 	AWACS_SWITCH("Mic Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __devinitdata = {
 	AWACS_VOLUME("PC Speaker Playback Volume", 4, 6, 1),
 };
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __devinitdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
 
 
@@ -872,7 +872,7 @@ static void snd_pmac_awacs_update_automute(struct snd_pmac *chip, int do_notify)
 /*
  * initialize chip
  */
-int __init
+int __devinit
 snd_pmac_awacs_init(struct snd_pmac *chip)
 {
 	int pm7500 = IS_PM7500;
diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c
index 89f5c328acf..a9d350789f5 100644
--- a/sound/ppc/beep.c
+++ b/sound/ppc/beep.c
@@ -215,7 +215,7 @@ static struct snd_kcontrol_new snd_pmac_beep_mixer = {
 };
 
 /* Initialize beep stuff */
-int __init snd_pmac_attach_beep(struct snd_pmac *chip)
+int __devinit snd_pmac_attach_beep(struct snd_pmac *chip)
 {
 	struct pmac_beep *beep;
 	struct input_dev *input_dev;
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 45a76297c38..16ed240e423 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -46,12 +46,12 @@ snd_pmac_burgundy_extend_wait(struct snd_pmac *chip)
 	timeout = 50;
 	while (!(in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--)
 		udelay(1);
-	if (! timeout)
+	if (timeout < 0)
 		printk(KERN_DEBUG "burgundy_extend_wait: timeout #1\n");
 	timeout = 50;
 	while ((in_le32(&chip->awacs->codec_stat) & MASK_EXTEND) && timeout--)
 		udelay(1);
-	if (! timeout)
+	if (timeout < 0)
 		printk(KERN_DEBUG "burgundy_extend_wait: timeout #2\n");
 }
 
@@ -468,7 +468,7 @@ static int snd_pmac_burgundy_put_switch_b(struct snd_kcontrol *kcontrol,
 /*
  * Burgundy mixers
  */
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Master Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_MASTER_VOLUME, 8),
 	BURGUNDY_VOLUME_W("CD Capture Volume", 0,
@@ -496,7 +496,7 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = {
  */	BURGUNDY_SWITCH_B("PCM Capture Switch", 0,
 			MASK_ADDR_BURGUNDY_HOSTIFEH, 0x01, 0, 0)
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Line in Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_VOLLINE, 16),
 	BURGUNDY_VOLUME_W("Mic Capture Volume", 0,
@@ -522,7 +522,7 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = {
 	BURGUNDY_SWITCH_B("Mic Boost Capture Switch", 0,
 			MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1)
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = {
+static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __devinitdata = {
 	BURGUNDY_VOLUME_W("Line in Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_VOLMIC, 16),
 	BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0,
@@ -538,33 +538,33 @@ static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = {
 /*	BURGUNDY_SWITCH_B("Line in Boost Capture Switch", 0,
  *		MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) */
 };
-static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Master Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT | BURGUNDY_LINEOUT_LEFT | BURGUNDY_HP_LEFT,
 	BURGUNDY_OUTPUT_RIGHT | BURGUNDY_LINEOUT_RIGHT | BURGUNDY_HP_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("Master Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN
 	| BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN, 0, 0);
-static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Line out Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_LINEOUT_LEFT, BURGUNDY_LINEOUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __devinitdata =
 BURGUNDY_SWITCH_B("Line out Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
-static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __devinitdata =
 BURGUNDY_SWITCH_B("Headphone Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_HP_LEFT, BURGUNDY_HP_RIGHT, 1);
@@ -618,7 +618,7 @@ static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_noti
 /*
  * initialize burgundy
  */
-int __init snd_pmac_burgundy_init(struct snd_pmac *chip)
+int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip)
 {
 	int imac = machine_is_compatible("iMac");
 	int i, err;
diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c
index f8d478c2da6..24200b7bdac 100644
--- a/sound/ppc/daca.c
+++ b/sound/ppc/daca.c
@@ -244,7 +244,7 @@ static void daca_cleanup(struct snd_pmac *chip)
 }
 
 /* exported */
-int __init snd_pmac_daca_init(struct snd_pmac *chip)
+int __devinit snd_pmac_daca_init(struct snd_pmac *chip)
 {
 	int i, err;
 	struct pmac_daca *mix;
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index a5afb2682e7..835fa19ed46 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -33,10 +33,6 @@
 static struct pmac_keywest *keywest_ctx;
 
 
-#ifndef i2c_device_name
-#define i2c_device_name(x)	((x)->name)
-#endif
-
 static int keywest_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -56,7 +52,7 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter)
 	if (! keywest_ctx)
 		return -EINVAL;
 
-	if (strncmp(i2c_device_name(adapter), "mac-io", 6))
+	if (strncmp(adapter->name, "mac-io", 6))
 		return 0; /* ignored */
 
 	memset(&info, 0, sizeof(struct i2c_board_info));
@@ -109,7 +105,7 @@ void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
 	}
 }
 
-int __init snd_pmac_tumbler_post_init(void)
+int __devinit snd_pmac_tumbler_post_init(void)
 {
 	int err;
 	
@@ -124,7 +120,7 @@ int __init snd_pmac_tumbler_post_init(void)
 }
 
 /* exported */
-int __init snd_pmac_keywest_init(struct pmac_keywest *i2c)
+int __devinit snd_pmac_keywest_init(struct pmac_keywest *i2c)
 {
 	int err;
 
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 9b4e9c31669..7bc492ee77e 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -702,7 +702,7 @@ static struct snd_pcm_ops snd_pmac_capture_ops = {
 	.pointer =	snd_pmac_capture_pointer,
 };
 
-int __init snd_pmac_pcm_new(struct snd_pmac *chip)
+int __devinit snd_pmac_pcm_new(struct snd_pmac *chip)
 {
 	struct snd_pcm *pcm;
 	int err;
@@ -908,7 +908,7 @@ static int snd_pmac_dev_free(struct snd_device *device)
  * check the machine support byteswap (little-endian)
  */
 
-static void __init detect_byte_swap(struct snd_pmac *chip)
+static void __devinit detect_byte_swap(struct snd_pmac *chip)
 {
 	struct device_node *mio;
 
@@ -934,7 +934,7 @@ static void __init detect_byte_swap(struct snd_pmac *chip)
 /*
  * detect a sound chip
  */
-static int __init snd_pmac_detect(struct snd_pmac *chip)
+static int __devinit snd_pmac_detect(struct snd_pmac *chip)
 {
 	struct device_node *sound;
 	struct device_node *dn;
@@ -1143,7 +1143,7 @@ static int pmac_hp_detect_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
+static struct snd_kcontrol_new auto_mute_controls[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Auto Mute Switch",
 	  .info = snd_pmac_boolean_mono_info,
@@ -1158,7 +1158,7 @@ static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
 	},
 };
 
-int __init snd_pmac_add_automute(struct snd_pmac *chip)
+int __devinit snd_pmac_add_automute(struct snd_pmac *chip)
 {
 	int err;
 	chip->auto_mute = 1;
@@ -1175,7 +1175,7 @@ int __init snd_pmac_add_automute(struct snd_pmac *chip)
 /*
  * create and detect a pmac chip record
  */
-int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
+int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 {
 	struct snd_pmac *chip;
 	struct device_node *np;
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index f361c26506a..53c81a54761 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -18,81 +18,31 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
 #include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <sound/asound.h>
+#include <sound/control.h>
 #include <sound/core.h>
 #include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/asound.h>
 #include <sound/memalloc.h>
+#include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/control.h>
-#include <linux/dmapool.h>
-#include <linux/dma-mapping.h>
-#include <asm/firmware.h>
+
 #include <asm/dma.h>
+#include <asm/firmware.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
 #include <asm/ps3av.h>
 
-#include "snd_ps3_reg.h"
 #include "snd_ps3.h"
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("PS3 sound driver");
-MODULE_AUTHOR("Sony Computer Entertainment Inc.");
-
-/* module  entries */
-static int __init snd_ps3_init(void);
-static void __exit snd_ps3_exit(void);
-
-/* ALSA snd driver ops */
-static int snd_ps3_pcm_open(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_close(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_prepare(struct snd_pcm_substream *substream);
-static int snd_ps3_pcm_trigger(struct snd_pcm_substream *substream,
-				 int cmd);
-static snd_pcm_uframes_t snd_ps3_pcm_pointer(struct snd_pcm_substream
-					     *substream);
-static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *hw_params);
-static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream);
-
-
-/* ps3_system_bus_driver entries */
-static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev);
-static int snd_ps3_driver_remove(struct ps3_system_bus_device *dev);
-
-/* address setup */
-static int snd_ps3_map_mmio(void);
-static void snd_ps3_unmap_mmio(void);
-static int snd_ps3_allocate_irq(void);
-static void snd_ps3_free_irq(void);
-static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start);
-
-/* interrupt handler */
-static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id);
-
-
-/* set sampling rate/format */
-static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream);
-/* take effect parameter change */
-static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card);
-/* initialize avsetting and take it effect */
-static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card);
-/* setup dma */
-static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
-			       enum snd_ps3_dma_filltype filltype);
-static void snd_ps3_wait_for_dma_stop(struct snd_ps3_card_info *card);
-
-static dma_addr_t v_to_bus(struct snd_ps3_card_info *, void  *vaddr, int ch);
+#include "snd_ps3_reg.h"
 
 
-module_init(snd_ps3_init);
-module_exit(snd_ps3_exit);
-
 /*
  * global
  */
@@ -165,25 +115,13 @@ static const struct snd_pcm_hardware snd_ps3_pcm_hw = {
 	.fifo_size = PS3_AUDIO_FIFO_SIZE
 };
 
-static struct snd_pcm_ops snd_ps3_pcm_spdif_ops =
-{
-	.open = snd_ps3_pcm_open,
-	.close = snd_ps3_pcm_close,
-	.prepare = snd_ps3_pcm_prepare,
-	.ioctl = snd_pcm_lib_ioctl,
-	.trigger = snd_ps3_pcm_trigger,
-	.pointer = snd_ps3_pcm_pointer,
-	.hw_params = snd_ps3_pcm_hw_params,
-	.hw_free = snd_ps3_pcm_hw_free
-};
-
 static int snd_ps3_verify_dma_stop(struct snd_ps3_card_info *card,
 				   int count, int force_stop)
 {
 	int dma_ch, done, retries, stop_forced = 0;
 	uint32_t status;
 
-	for (dma_ch = 0; dma_ch < 8; dma_ch ++) {
+	for (dma_ch = 0; dma_ch < 8; dma_ch++) {
 		retries = count;
 		do {
 			status = read_reg(PS3_AUDIO_KICK(dma_ch)) &
@@ -259,9 +197,7 @@ static void snd_ps3_kick_dma(struct snd_ps3_card_info *card)
 /*
  * convert virtual addr to ioif bus addr.
  */
-static dma_addr_t v_to_bus(struct snd_ps3_card_info *card,
-			   void * paddr,
-			   int ch)
+static dma_addr_t v_to_bus(struct snd_ps3_card_info *card, void *paddr, int ch)
 {
 	return card->dma_start_bus_addr[ch] +
 		(paddr - card->dma_start_vaddr[ch]);
@@ -321,7 +257,7 @@ static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
 	spin_lock_irqsave(&card->dma_lock, irqsave);
 	for (ch = 0; ch < 2; ch++) {
 		start_vaddr = card->dma_next_transfer_vaddr[0];
-		for (stage = 0; stage < fill_stages; stage ++) {
+		for (stage = 0; stage < fill_stages; stage++) {
 			dma_ch = stage * 2 + ch;
 			if (silent)
 				dma_addr = card->null_buffer_start_dma_addr;
@@ -372,6 +308,71 @@ static int snd_ps3_program_dma(struct snd_ps3_card_info *card,
 }
 
 /*
+ * Interrupt handler
+ */
+static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
+{
+
+	uint32_t port_intr;
+	int underflow_occured = 0;
+	struct snd_ps3_card_info *card = dev_id;
+
+	if (!card->running) {
+		update_reg(PS3_AUDIO_AX_IS, 0);
+		update_reg(PS3_AUDIO_INTR_0, 0);
+		return IRQ_HANDLED;
+	}
+
+	port_intr = read_reg(PS3_AUDIO_AX_IS);
+	/*
+	 *serial buffer empty detected (every 4 times),
+	 *program next dma and kick it
+	 */
+	if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) {
+		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0));
+		if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
+			write_reg(PS3_AUDIO_AX_IS, port_intr);
+			underflow_occured = 1;
+		}
+		if (card->silent) {
+			/* we are still in silent time */
+			snd_ps3_program_dma(card,
+				(underflow_occured) ?
+				SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL :
+				SND_PS3_DMA_FILLTYPE_SILENT_RUNNING);
+			snd_ps3_kick_dma(card);
+			card->silent--;
+		} else {
+			snd_ps3_program_dma(card,
+				(underflow_occured) ?
+				SND_PS3_DMA_FILLTYPE_FIRSTFILL :
+				SND_PS3_DMA_FILLTYPE_RUNNING);
+			snd_ps3_kick_dma(card);
+			snd_pcm_period_elapsed(card->substream);
+		}
+	} else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
+		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0));
+		/*
+		 * serial out underflow, but buffer empty not detected.
+		 * in this case, fill fifo with 0 to recover.  After
+		 * filling dummy data, serial automatically start to
+		 * consume them and then will generate normal buffer
+		 * empty interrupts.
+		 * If both buffer underflow and buffer empty are occured,
+		 * it is better to do nomal data transfer than empty one
+		 */
+		snd_ps3_program_dma(card,
+				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+		snd_ps3_kick_dma(card);
+		snd_ps3_program_dma(card,
+				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+		snd_ps3_kick_dma(card);
+	}
+	/* clear interrupt cause */
+	return IRQ_HANDLED;
+};
+
+/*
  * audio mute on/off
  * mute_on : 0 output enabled
  *           1 mute
@@ -382,6 +383,142 @@ static int snd_ps3_mute(int mute_on)
 }
 
 /*
+ * av setting
+ * NOTE: calling this function may generate audio interrupt.
+ */
+static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card)
+{
+	int ret, retries, i;
+	pr_debug("%s: start\n", __func__);
+
+	ret = ps3av_set_audio_mode(card->avs.avs_audio_ch,
+				  card->avs.avs_audio_rate,
+				  card->avs.avs_audio_width,
+				  card->avs.avs_audio_format,
+				  card->avs.avs_audio_source);
+	/*
+	 * Reset the following unwanted settings:
+	 */
+
+	/* disable all 3wire buffers */
+	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
+			~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(1) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(2) |
+			  PS3_AUDIO_AO_3WMCTRL_ASOEN(3)),
+			0);
+	wmb();	/* ensure the hardware sees the change */
+	/* wait for actually stopped */
+	retries = 1000;
+	while ((read_reg(PS3_AUDIO_AO_3WMCTRL) &
+		(PS3_AUDIO_AO_3WMCTRL_ASORUN(0) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(1) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(2) |
+		 PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) &&
+	       --retries) {
+		udelay(1);
+	}
+
+	/* reset buffer pointer */
+	for (i = 0; i < 4; i++) {
+		update_reg(PS3_AUDIO_AO_3WCTRL(i),
+			   PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET);
+		udelay(10);
+	}
+	wmb(); /* ensure the hardware actually start resetting */
+
+	/* enable 3wire#0 buffer */
+	update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0));
+
+
+	/* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */
+	update_mask_reg(PS3_AUDIO_AO_3WCTRL(0),
+			~PS3_AUDIO_AO_3WCTRL_ASODF,
+			PS3_AUDIO_AO_3WCTRL_ASODF_LSB);
+	update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0),
+			~PS3_AUDIO_AO_SPDCTRL_SPODF,
+			PS3_AUDIO_AO_SPDCTRL_SPODF_LSB);
+	/* ensure all the setting above is written back to register */
+	wmb();
+	/* avsetting driver altered AX_IE, caller must reset it if you want */
+	pr_debug("%s: end\n", __func__);
+	return ret;
+}
+
+/*
+ *  set sampling rate according to the substream
+ */
+static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream)
+{
+	struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream);
+	struct snd_ps3_avsetting_info avs;
+	int ret;
+
+	avs = card->avs;
+
+	pr_debug("%s: called freq=%d width=%d\n", __func__,
+		 substream->runtime->rate,
+		 snd_pcm_format_width(substream->runtime->format));
+
+	pr_debug("%s: before freq=%d width=%d\n", __func__,
+		 card->avs.avs_audio_rate, card->avs.avs_audio_width);
+
+	/* sample rate */
+	switch (substream->runtime->rate) {
+	case 44100:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K;
+		break;
+	case 48000:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
+		break;
+	case 88200:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K;
+		break;
+	case 96000:
+		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K;
+		break;
+	default:
+		pr_info("%s: invalid rate %d\n", __func__,
+			substream->runtime->rate);
+		return 1;
+	}
+
+	/* width */
+	switch (snd_pcm_format_width(substream->runtime->format)) {
+	case 16:
+		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
+		break;
+	case 24:
+		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24;
+		break;
+	default:
+		pr_info("%s: invalid width %d\n", __func__,
+			snd_pcm_format_width(substream->runtime->format));
+		return 1;
+	}
+
+	memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8);
+
+	if (memcmp(&card->avs, &avs, sizeof(avs))) {
+		pr_debug("%s: after freq=%d width=%d\n", __func__,
+			 card->avs.avs_audio_rate, card->avs.avs_audio_width);
+
+		card->avs = avs;
+		snd_ps3_change_avsetting(card);
+		ret = 0;
+	} else
+		ret = 1;
+
+	/* check CS non-audio bit and mute accordingly */
+	if (avs.avs_cs_info[0] & 0x02)
+		ps3av_audio_mute_analog(1); /* mute if non-audio */
+	else
+		ps3av_audio_mute_analog(0);
+
+	return ret;
+}
+
+/*
  * PCM operators
  */
 static int snd_ps3_pcm_open(struct snd_pcm_substream *substream)
@@ -406,6 +543,13 @@ static int snd_ps3_pcm_open(struct snd_pcm_substream *substream)
 	return 0;
 };
 
+static int snd_ps3_pcm_close(struct snd_pcm_substream *substream)
+{
+	/* mute on */
+	snd_ps3_mute(1);
+	return 0;
+};
+
 static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *hw_params)
 {
@@ -417,6 +561,13 @@ static int snd_ps3_pcm_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 };
 
+static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	int ret;
+	ret = snd_pcm_lib_free_pages(substream);
+	return ret;
+};
+
 static int snd_ps3_delay_to_bytes(struct snd_pcm_substream *substream,
 				  unsigned int delay_ms)
 {
@@ -556,202 +707,6 @@ static snd_pcm_uframes_t snd_ps3_pcm_pointer(
 	return ret;
 };
 
-static int snd_ps3_pcm_hw_free(struct snd_pcm_substream *substream)
-{
-	int ret;
-	ret = snd_pcm_lib_free_pages(substream);
-	return ret;
-};
-
-static int snd_ps3_pcm_close(struct snd_pcm_substream *substream)
-{
-	/* mute on */
-	snd_ps3_mute(1);
-	return 0;
-};
-
-static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
-{
-	/*
-	 * avsetting driver seems to never change the followings
-	 * so, init them here once
-	 */
-
-	/* no dma interrupt needed */
-	write_reg(PS3_AUDIO_INTR_EN_0, 0);
-
-	/* use every 4 buffer empty interrupt */
-	update_mask_reg(PS3_AUDIO_AX_IC,
-			PS3_AUDIO_AX_IC_AASOIMD_MASK,
-			PS3_AUDIO_AX_IC_AASOIMD_EVERY4);
-
-	/* enable 3wire clocks */
-	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
-			~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED |
-			  PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED),
-			0);
-	update_reg(PS3_AUDIO_AO_3WMCTRL,
-		   PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT);
-}
-
-/*
- * av setting
- * NOTE: calling this function may generate audio interrupt.
- */
-static int snd_ps3_change_avsetting(struct snd_ps3_card_info *card)
-{
-	int ret, retries, i;
-	pr_debug("%s: start\n", __func__);
-
-	ret = ps3av_set_audio_mode(card->avs.avs_audio_ch,
-				  card->avs.avs_audio_rate,
-				  card->avs.avs_audio_width,
-				  card->avs.avs_audio_format,
-				  card->avs.avs_audio_source);
-	/*
-	 * Reset the following unwanted settings:
-	 */
-
-	/* disable all 3wire buffers */
-	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
-			~(PS3_AUDIO_AO_3WMCTRL_ASOEN(0) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(1) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(2) |
-			  PS3_AUDIO_AO_3WMCTRL_ASOEN(3)),
-			0);
-	wmb(); 	/* ensure the hardware sees the change */
-	/* wait for actually stopped */
-	retries = 1000;
-	while ((read_reg(PS3_AUDIO_AO_3WMCTRL) &
-		(PS3_AUDIO_AO_3WMCTRL_ASORUN(0) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(1) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(2) |
-		 PS3_AUDIO_AO_3WMCTRL_ASORUN(3))) &&
-	       --retries) {
-		udelay(1);
-	}
-
-	/* reset buffer pointer */
-	for (i = 0; i < 4; i++) {
-		update_reg(PS3_AUDIO_AO_3WCTRL(i),
-			   PS3_AUDIO_AO_3WCTRL_ASOBRST_RESET);
-		udelay(10);
-	}
-	wmb(); /* ensure the hardware actually start resetting */
-
-	/* enable 3wire#0 buffer */
-	update_reg(PS3_AUDIO_AO_3WMCTRL, PS3_AUDIO_AO_3WMCTRL_ASOEN(0));
-
-
-	/* In 24bit mode,ALSA inserts a zero byte at first byte of per sample */
-	update_mask_reg(PS3_AUDIO_AO_3WCTRL(0),
-			~PS3_AUDIO_AO_3WCTRL_ASODF,
-			PS3_AUDIO_AO_3WCTRL_ASODF_LSB);
-	update_mask_reg(PS3_AUDIO_AO_SPDCTRL(0),
-			~PS3_AUDIO_AO_SPDCTRL_SPODF,
-			PS3_AUDIO_AO_SPDCTRL_SPODF_LSB);
-	/* ensure all the setting above is written back to register */
-	wmb();
-	/* avsetting driver altered AX_IE, caller must reset it if you want */
-	pr_debug("%s: end\n", __func__);
-	return ret;
-}
-
-static int snd_ps3_init_avsetting(struct snd_ps3_card_info *card)
-{
-	int ret;
-	pr_debug("%s: start\n", __func__);
-	card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2;
-	card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
-	card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
-	card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM;
-	card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL;
-	memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8);
-
-	ret = snd_ps3_change_avsetting(card);
-
-	snd_ps3_audio_fixup(card);
-
-	/* to start to generate SPDIF signal, fill data */
-	snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-	snd_ps3_kick_dma(card);
-	pr_debug("%s: end\n", __func__);
-	return ret;
-}
-
-/*
- *  set sampling rate according to the substream
- */
-static int snd_ps3_set_avsetting(struct snd_pcm_substream *substream)
-{
-	struct snd_ps3_card_info *card = snd_pcm_substream_chip(substream);
-	struct snd_ps3_avsetting_info avs;
-	int ret;
-
-	avs = card->avs;
-
-	pr_debug("%s: called freq=%d width=%d\n", __func__,
-		 substream->runtime->rate,
-		 snd_pcm_format_width(substream->runtime->format));
-
-	pr_debug("%s: before freq=%d width=%d\n", __func__,
-		 card->avs.avs_audio_rate, card->avs.avs_audio_width);
-
-	/* sample rate */
-	switch (substream->runtime->rate) {
-	case 44100:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_44K;
-		break;
-	case 48000:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
-		break;
-	case 88200:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_88K;
-		break;
-	case 96000:
-		avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_96K;
-		break;
-	default:
-		pr_info("%s: invalid rate %d\n", __func__,
-			substream->runtime->rate);
-		return 1;
-	}
-
-	/* width */
-	switch (snd_pcm_format_width(substream->runtime->format)) {
-	case 16:
-		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
-		break;
-	case 24:
-		avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_24;
-		break;
-	default:
-		pr_info("%s: invalid width %d\n", __func__,
-			snd_pcm_format_width(substream->runtime->format));
-		return 1;
-	}
-
-	memcpy(avs.avs_cs_info, ps3av_mode_cs_info, 8);
-
-	if (memcmp(&card->avs, &avs, sizeof(avs))) {
-		pr_debug("%s: after freq=%d width=%d\n", __func__,
-			 card->avs.avs_audio_rate, card->avs.avs_audio_width);
-
-		card->avs = avs;
-		snd_ps3_change_avsetting(card);
-		ret = 0;
-	} else
-		ret = 1;
-
-	/* check CS non-audio bit and mute accordingly */
-	if (avs.avs_cs_info[0] & 0x02)
-		ps3av_audio_mute_analog(1); /* mute if non-audio */
-	else
-		ps3av_audio_mute_analog(0);
-
-	return ret;
-}
-
 /*
  * SPDIF status bits controls
  */
@@ -798,28 +753,39 @@ static struct snd_kcontrol_new spdif_ctls[] = {
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_cmask_get,
 	},
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_pmask_get,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
 		.info = snd_ps3_spdif_mask_info,
 		.get = snd_ps3_spdif_default_get,
 		.put = snd_ps3_spdif_default_put,
 	},
 };
 
+static struct snd_pcm_ops snd_ps3_pcm_spdif_ops = {
+	.open = snd_ps3_pcm_open,
+	.close = snd_ps3_pcm_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_ps3_pcm_hw_params,
+	.hw_free = snd_ps3_pcm_hw_free,
+	.prepare = snd_ps3_pcm_prepare,
+	.trigger = snd_ps3_pcm_trigger,
+	.pointer = snd_ps3_pcm_pointer,
+};
+
 
-static int snd_ps3_map_mmio(void)
+static int __devinit snd_ps3_map_mmio(void)
 {
 	the_card.mapped_mmio_vaddr =
 		ioremap(the_card.ps3_dev->m_region->bus_addr,
@@ -841,7 +807,7 @@ static void snd_ps3_unmap_mmio(void)
 	the_card.mapped_mmio_vaddr = NULL;
 }
 
-static int snd_ps3_allocate_irq(void)
+static int __devinit snd_ps3_allocate_irq(void)
 {
 	int ret;
 	u64 lpar_addr, lpar_size;
@@ -899,7 +865,7 @@ static void snd_ps3_free_irq(void)
 	ps3_irq_plug_destroy(the_card.irq_no);
 }
 
-static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
+static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
 {
 	uint64_t val;
 	int ret;
@@ -915,7 +881,53 @@ static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
 			ret);
 }
 
-static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
+static void __devinit snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
+{
+	/*
+	 * avsetting driver seems to never change the followings
+	 * so, init them here once
+	 */
+
+	/* no dma interrupt needed */
+	write_reg(PS3_AUDIO_INTR_EN_0, 0);
+
+	/* use every 4 buffer empty interrupt */
+	update_mask_reg(PS3_AUDIO_AX_IC,
+			PS3_AUDIO_AX_IC_AASOIMD_MASK,
+			PS3_AUDIO_AX_IC_AASOIMD_EVERY4);
+
+	/* enable 3wire clocks */
+	update_mask_reg(PS3_AUDIO_AO_3WMCTRL,
+			~(PS3_AUDIO_AO_3WMCTRL_ASOBCLKD_DISABLED |
+			  PS3_AUDIO_AO_3WMCTRL_ASOLRCKD_DISABLED),
+			0);
+	update_reg(PS3_AUDIO_AO_3WMCTRL,
+		   PS3_AUDIO_AO_3WMCTRL_ASOPLRCK_DEFAULT);
+}
+
+static int __devinit snd_ps3_init_avsetting(struct snd_ps3_card_info *card)
+{
+	int ret;
+	pr_debug("%s: start\n", __func__);
+	card->avs.avs_audio_ch = PS3AV_CMD_AUDIO_NUM_OF_CH_2;
+	card->avs.avs_audio_rate = PS3AV_CMD_AUDIO_FS_48K;
+	card->avs.avs_audio_width = PS3AV_CMD_AUDIO_WORD_BITS_16;
+	card->avs.avs_audio_format = PS3AV_CMD_AUDIO_FORMAT_PCM;
+	card->avs.avs_audio_source = PS3AV_CMD_AUDIO_SOURCE_SERIAL;
+	memcpy(card->avs.avs_cs_info, ps3av_mode_cs_info, 8);
+
+	ret = snd_ps3_change_avsetting(card);
+
+	snd_ps3_audio_fixup(card);
+
+	/* to start to generate SPDIF signal, fill data */
+	snd_ps3_program_dma(card, SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
+	snd_ps3_kick_dma(card);
+	pr_debug("%s: end\n", __func__);
+	return ret;
+}
+
+static int __devinit snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
 {
 	int i, ret;
 	u64 lpar_addr, lpar_size;
@@ -1020,11 +1032,12 @@ static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev)
 	 * its size should be lager than PS3_AUDIO_FIFO_STAGE_SIZE * 2
 	 * PAGE_SIZE is enogh
 	 */
-	if (!(the_card.null_buffer_start_vaddr =
-	      dma_alloc_coherent(&the_card.ps3_dev->core,
-				 PAGE_SIZE,
-				 &the_card.null_buffer_start_dma_addr,
-				 GFP_KERNEL))) {
+	the_card.null_buffer_start_vaddr =
+		dma_alloc_coherent(&the_card.ps3_dev->core,
+				   PAGE_SIZE,
+				   &the_card.null_buffer_start_dma_addr,
+				   GFP_KERNEL);
+	if (!the_card.null_buffer_start_vaddr) {
 		pr_info("%s: nullbuffer alloc failed\n", __func__);
 		goto clean_preallocate;
 	}
@@ -1115,71 +1128,6 @@ static struct ps3_system_bus_driver snd_ps3_bus_driver_info = {
 
 
 /*
- * Interrupt handler
- */
-static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
-{
-
-	uint32_t port_intr;
-	int underflow_occured = 0;
-	struct snd_ps3_card_info *card = dev_id;
-
-	if (!card->running) {
-		update_reg(PS3_AUDIO_AX_IS, 0);
-		update_reg(PS3_AUDIO_INTR_0, 0);
-		return IRQ_HANDLED;
-	}
-
-	port_intr = read_reg(PS3_AUDIO_AX_IS);
-	/*
-	 *serial buffer empty detected (every 4 times),
-	 *program next dma and kick it
-	 */
-	if (port_intr & PS3_AUDIO_AX_IE_ASOBEIE(0)) {
-		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBEIE(0));
-		if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
-			write_reg(PS3_AUDIO_AX_IS, port_intr);
-			underflow_occured = 1;
-		}
-		if (card->silent) {
-			/* we are still in silent time */
-			snd_ps3_program_dma(card,
-				(underflow_occured) ?
-				SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL :
-				SND_PS3_DMA_FILLTYPE_SILENT_RUNNING);
-			snd_ps3_kick_dma(card);
-			card->silent --;
-		} else {
-			snd_ps3_program_dma(card,
-				(underflow_occured) ?
-				SND_PS3_DMA_FILLTYPE_FIRSTFILL :
-				SND_PS3_DMA_FILLTYPE_RUNNING);
-			snd_ps3_kick_dma(card);
-			snd_pcm_period_elapsed(card->substream);
-		}
-	} else if (port_intr & PS3_AUDIO_AX_IE_ASOBUIE(0)) {
-		write_reg(PS3_AUDIO_AX_IS, PS3_AUDIO_AX_IE_ASOBUIE(0));
-		/*
-		 * serial out underflow, but buffer empty not detected.
-		 * in this case, fill fifo with 0 to recover.  After
-		 * filling dummy data, serial automatically start to
-		 * consume them and then will generate normal buffer
-		 * empty interrupts.
-		 * If both buffer underflow and buffer empty are occured,
-		 * it is better to do nomal data transfer than empty one
-		 */
-		snd_ps3_program_dma(card,
-				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-		snd_ps3_kick_dma(card);
-		snd_ps3_program_dma(card,
-				    SND_PS3_DMA_FILLTYPE_SILENT_FIRSTFILL);
-		snd_ps3_kick_dma(card);
-	}
-	/* clear interrupt cause */
-	return IRQ_HANDLED;
-};
-
-/*
  * module/subsystem initialize/terminate
  */
 static int __init snd_ps3_init(void)
@@ -1197,10 +1145,15 @@ static int __init snd_ps3_init(void)
 
 	return ret;
 }
+module_init(snd_ps3_init);
 
 static void __exit snd_ps3_exit(void)
 {
 	ps3_system_bus_driver_unregister(&snd_ps3_bus_driver_info);
 }
+module_exit(snd_ps3_exit);
 
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PS3 sound driver");
+MODULE_AUTHOR("Sony Computer Entertainment Inc.");
 MODULE_ALIAS(PS3_MODULE_ALIAS_SOUND);
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 40222fcc087..08e584d1453 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -838,7 +838,7 @@ static int snapper_put_capture_source(struct snd_kcontrol *kcontrol,
 
 /*
  */
-static struct snd_kcontrol_new tumbler_mixers[] __initdata = {
+static struct snd_kcontrol_new tumbler_mixers[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Master Playback Volume",
 	  .info = tumbler_info_master_volume,
@@ -862,7 +862,7 @@ static struct snd_kcontrol_new tumbler_mixers[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new snapper_mixers[] __initdata = {
+static struct snd_kcontrol_new snapper_mixers[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	  .name = "Master Playback Volume",
 	  .info = tumbler_info_master_volume,
@@ -895,7 +895,7 @@ static struct snd_kcontrol_new snapper_mixers[] __initdata = {
 	},
 };
 
-static struct snd_kcontrol_new tumbler_hp_sw __initdata = {
+static struct snd_kcontrol_new tumbler_hp_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Headphone Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -903,7 +903,7 @@ static struct snd_kcontrol_new tumbler_hp_sw __initdata = {
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_HP,
 };
-static struct snd_kcontrol_new tumbler_speaker_sw __initdata = {
+static struct snd_kcontrol_new tumbler_speaker_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "PC Speaker Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -911,7 +911,7 @@ static struct snd_kcontrol_new tumbler_speaker_sw __initdata = {
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_AMP,
 };
-static struct snd_kcontrol_new tumbler_lineout_sw __initdata = {
+static struct snd_kcontrol_new tumbler_lineout_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Line Out Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -919,7 +919,7 @@ static struct snd_kcontrol_new tumbler_lineout_sw __initdata = {
 	.put = tumbler_put_mute_switch,
 	.private_value = TUMBLER_MUTE_LINE,
 };
-static struct snd_kcontrol_new tumbler_drc_sw __initdata = {
+static struct snd_kcontrol_new tumbler_drc_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "DRC Switch",
 	.info = snd_pmac_boolean_mono_info,
@@ -1269,7 +1269,7 @@ static void tumbler_resume(struct snd_pmac *chip)
 #endif
 
 /* initialize tumbler */
-static int __init tumbler_init(struct snd_pmac *chip)
+static int __devinit tumbler_init(struct snd_pmac *chip)
 {
 	int irq;
 	struct pmac_tumbler *mix = chip->mixer_data;
@@ -1339,7 +1339,7 @@ static void tumbler_cleanup(struct snd_pmac *chip)
 }
 
 /* exported */
-int __init snd_pmac_tumbler_init(struct snd_pmac *chip)
+int __devinit snd_pmac_tumbler_init(struct snd_pmac *chip)
 {
 	int i, err;
 	struct pmac_tumbler *mix;
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 3d2bb6fc6dc..d3e786a9a0a 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -32,7 +32,9 @@ source "sound/soc/fsl/Kconfig"
 source "sound/soc/omap/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/s3c24xx/Kconfig"
+source "sound/soc/s6000/Kconfig"
 source "sound/soc/sh/Kconfig"
+source "sound/soc/txx9/Kconfig"
 
 # Supported codecs
 source "sound/soc/codecs/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 0237879fd41..6f1e28de23c 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -10,4 +10,6 @@ obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)	+= omap/
 obj-$(CONFIG_SND_SOC)	+= pxa/
 obj-$(CONFIG_SND_SOC)	+= s3c24xx/
+obj-$(CONFIG_SND_SOC)	+= s6000/
 obj-$(CONFIG_SND_SOC)	+= sh/
+obj-$(CONFIG_SND_SOC)	+= txx9/
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index a608d7009db..e720d5e6f04 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -41,3 +41,11 @@ config SND_AT32_SOC_PLAYPAQ_SLAVE
           and FRAME signals on the PlayPaq.  Unless you want to play
           with the AT32 as the SSC master, you probably want to say N here,
           as this will give you better sound quality.
+
+config SND_AT91_SOC_AFEB9260
+	tristate "SoC Audio support for AFEB9260 board"
+	depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
+	select SND_ATMEL_SOC_SSC
+	select SND_SOC_TLV320AIC23
+	help
+	  Say Y here to support sound on AFEB9260 board.
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index f54a7cc68e6..e7ea56bd5f8 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -13,3 +13,4 @@ snd-soc-playpaq-objs := playpaq_wm8510.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
 obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
+obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
index 70657534e6b..9eb610c2ba9 100644
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -117,7 +117,7 @@ static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
 	 * Find actual rate, compare to requested rate
 	 */
 	actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
-	pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n",
+	pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
 		 rate, actual_rate);
 
 
diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c
new file mode 100644
index 00000000000..23349de2731
--- /dev/null
+++ b/sound/soc/atmel/snd-soc-afeb9260.c
@@ -0,0 +1,203 @@
+/*
+ * afeb9260.c  --  SoC audio for AFEB9260
+ *
+ * Copyright (C) 2009 Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <linux/gpio.h>
+
+#include "../codecs/tlv320aic23.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+#define CODEC_CLOCK 	12000000
+
+static int afeb9260_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int err;
+
+	/* Set codec DAI configuration */
+	err = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S|
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (err < 0) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return err;
+	}
+
+	/* Set cpu DAI configuration */
+	err = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (err < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return err;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	err =
+	    snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, SND_SOC_CLOCK_IN);
+
+	if (err < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return err;
+	}
+
+	return err;
+}
+
+static struct snd_soc_ops afeb9260_ops = {
+	.hw_params = afeb9260_hw_params,
+};
+
+static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LHPOUT"},
+	{"Headphone Jack", NULL, "RHPOUT"},
+
+	{"LLINEIN", NULL, "Line In"},
+	{"RLINEIN", NULL, "Line In"},
+
+	{"MICIN", NULL, "Mic Jack"},
+};
+
+static int afeb9260_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+
+	/* Add afeb9260 specific widgets */
+	snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets,
+				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
+
+	/* Set up afeb9260 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+	snd_soc_dapm_enable_pin(codec, "Line In");
+	snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link afeb9260_dai = {
+	.name = "TLV320AIC23",
+	.stream_name = "AIC23",
+	.cpu_dai = &atmel_ssc_dai[0],
+	.codec_dai = &tlv320aic23_dai,
+	.init = afeb9260_tlv320aic23_init,
+	.ops = &afeb9260_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_machine_afeb9260 = {
+	.name = "AFEB9260",
+	.platform = &atmel_soc_platform,
+	.dai_link = &afeb9260_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device afeb9260_snd_devdata = {
+	.card = &snd_soc_machine_afeb9260,
+	.codec_dev = &soc_codec_dev_tlv320aic23,
+};
+
+static struct platform_device *afeb9260_snd_device;
+
+static int __init afeb9260_soc_init(void)
+{
+	int err;
+	struct device *dev;
+	struct atmel_ssc_info *ssc_p = afeb9260_dai.cpu_dai->private_data;
+	struct ssc_device *ssc = NULL;
+
+	if (!(machine_is_afeb9260()))
+		return -ENODEV;
+
+	ssc = ssc_request(0);
+	if (IS_ERR(ssc)) {
+		printk(KERN_ERR "ASoC: Failed to request SSC 0\n");
+		err = PTR_ERR(ssc);
+		ssc = NULL;
+		goto err_ssc;
+	}
+	ssc_p->ssc = ssc;
+
+	afeb9260_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!afeb9260_snd_device) {
+		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(afeb9260_snd_device, &afeb9260_snd_devdata);
+	afeb9260_snd_devdata.dev = &afeb9260_snd_device->dev;
+	err = platform_device_add(afeb9260_snd_device);
+	if (err)
+		goto err1;
+
+	dev = &afeb9260_snd_device->dev;
+
+	return 0;
+err1:
+	platform_device_del(afeb9260_snd_device);
+	platform_device_put(afeb9260_snd_device);
+err_ssc:
+	return err;
+
+}
+
+static void __exit afeb9260_soc_exit(void)
+{
+	platform_device_unregister(afeb9260_snd_device);
+}
+
+module_init(afeb9260_soc_init);
+module_exit(afeb9260_soc_exit);
+
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_DESCRIPTION("ALSA SoC for AFEB9260");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c
index 8a935f2d176..b1ed423fabd 100644
--- a/sound/soc/blackfin/bf5xx-ac97.c
+++ b/sound/soc/blackfin/bf5xx-ac97.c
@@ -31,6 +31,15 @@
 #include "bf5xx-sport.h"
 #include "bf5xx-ac97.h"
 
+/* Anomaly notes:
+ *  05000250 -	AD1980 is running in TDM mode and RFS/TFS are generated by SPORT
+ *		contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1,
+ *		while the max AC97 data size is 13*16. The DIV is always larger
+ *		than data size. AD73311 and ad2602 are not running in TDM mode.
+ *		AD1836 and AD73322 depend on external RFS/TFS only. So, this
+ *		anomaly does not affect blackfin sound drivers.
+*/
+
 static int *cmd_count;
 static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
 
diff --git a/sound/soc/blackfin/bf5xx-sport.c b/sound/soc/blackfin/bf5xx-sport.c
index b7953c8cf83..469ce7fab20 100644
--- a/sound/soc/blackfin/bf5xx-sport.c
+++ b/sound/soc/blackfin/bf5xx-sport.c
@@ -190,7 +190,7 @@ static inline int sport_hook_rx_dummy(struct sport_device *sport)
 	desc = get_dma_next_desc_ptr(sport->dma_rx_chan);
 	/* Copy the descriptor which will be damaged to backup */
 	temp_desc = *desc;
-	desc->x_count = 0xa;
+	desc->x_count = sport->dummy_count / 2;
 	desc->y_count = 0;
 	desc->next_desc_addr = sport->dummy_rx_desc;
 	local_irq_restore(flags);
@@ -309,7 +309,7 @@ static inline int sport_hook_tx_dummy(struct sport_device *sport)
 	desc = get_dma_next_desc_ptr(sport->dma_tx_chan);
 	/* Store the descriptor which will be damaged */
 	temp_desc = *desc;
-	desc->x_count = 0xa;
+	desc->x_count = sport->dummy_count / 2;
 	desc->y_count = 0;
 	desc->next_desc_addr = sport->dummy_tx_desc;
 	local_irq_restore(flags);
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index b6c7f7a01cb..bbc97fd7664 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -18,7 +18,9 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_AK4535 if I2C
 	select SND_SOC_CS4270 if I2C
 	select SND_SOC_PCM3008
+	select SND_SOC_SPDIF
 	select SND_SOC_SSM2602 if I2C
+	select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
 	select SND_SOC_TLV320AIC23 if I2C
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
 	select SND_SOC_TLV320AIC3X if I2C
@@ -35,8 +37,12 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8900 if I2C
 	select SND_SOC_WM8903 if I2C
+	select SND_SOC_WM8940 if I2C
+	select SND_SOC_WM8960 if I2C
 	select SND_SOC_WM8971 if I2C
+	select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8990 if I2C
+	select SND_SOC_WM9081 if I2C
 	select SND_SOC_WM9705 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9712 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9713 if SND_SOC_AC97_BUS
@@ -86,9 +92,15 @@ config SND_SOC_L3
 config SND_SOC_PCM3008
        tristate
 
+config SND_SOC_SPDIF
+	tristate
+
 config SND_SOC_SSM2602
 	tristate
 
+config SND_SOC_STAC9766
+	tristate
+
 config SND_SOC_TLV320AIC23
 	tristate
 
@@ -138,12 +150,24 @@ config SND_SOC_WM8900
 config SND_SOC_WM8903
 	tristate
 
+config SND_SOC_WM8940
+        tristate
+
+config SND_SOC_WM8960
+	tristate
+
 config SND_SOC_WM8971
 	tristate
 
+config SND_SOC_WM8988
+	tristate
+
 config SND_SOC_WM8990
 	tristate
 
+config SND_SOC_WM9081
+	tristate
+
 config SND_SOC_WM9705
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f2653803ede..8b7530546f4 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -6,7 +6,9 @@ snd-soc-ak4535-objs := ak4535.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-l3-objs := l3.o
 snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-spdif-objs := spdif_transciever.o
 snd-soc-ssm2602-objs := ssm2602.o
+snd-soc-stac9766-objs := stac9766.o
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
@@ -23,8 +25,12 @@ snd-soc-wm8750-objs := wm8750.o
 snd-soc-wm8753-objs := wm8753.o
 snd-soc-wm8900-objs := wm8900.o
 snd-soc-wm8903-objs := wm8903.o
+snd-soc-wm8940-objs := wm8940.o
+snd-soc-wm8960-objs := wm8960.o
 snd-soc-wm8971-objs := wm8971.o
+snd-soc-wm8988-objs := wm8988.o
 snd-soc-wm8990-objs := wm8990.o
+snd-soc-wm9081-objs := wm9081.o
 snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
@@ -37,7 +43,9 @@ obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
+obj-$(CONFIG_SND_SOC_STAC9766)	+= snd-soc-stac9766.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
@@ -55,7 +63,11 @@ obj-$(CONFIG_SND_SOC_WM8753)	+= snd-soc-wm8753.o
 obj-$(CONFIG_SND_SOC_WM8900)	+= snd-soc-wm8900.o
 obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
 obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
+obj-$(CONFIG_SND_SOC_WM8940)	+= snd-soc-wm8940.o
+obj-$(CONFIG_SND_SOC_WM8960)	+= snd-soc-wm8960.o
+obj-$(CONFIG_SND_SOC_WM8988)	+= snd-soc-wm8988.o
 obj-$(CONFIG_SND_SOC_WM8990)	+= snd-soc-wm8990.o
+obj-$(CONFIG_SND_SOC_WM9081)	+= snd-soc-wm9081.o
 obj-$(CONFIG_SND_SOC_WM9705)	+= snd-soc-wm9705.o
 obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c
index b0d4af145b8..932299bb5d1 100644
--- a/sound/soc/codecs/ac97.c
+++ b/sound/soc/codecs/ac97.c
@@ -53,13 +53,13 @@ struct snd_soc_dai ac97_dai = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = STD_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "AC97 Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = STD_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &ac97_dai_ops,
 };
 EXPORT_SYMBOL_GPL(ac97_dai);
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index ddb3b08ac23..d7440a982d2 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -137,13 +137,13 @@ struct snd_soc_dai ad1980_dai = {
 		.channels_min = 2,
 		.channels_max = 6,
 		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+		.formats = SND_SOC_STD_AC97_FMTS, },
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_48000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+		.formats = SND_SOC_STD_AC97_FMTS, },
 };
 EXPORT_SYMBOL_GPL(ad1980_dai);
 
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 7fa09a38762..a32b8226c8a 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -18,7 +18,7 @@
  * - The machine driver's 'startup' function must call
  *   cs4270_set_dai_sysclk() with the value of MCLK.
  * - Only I2S and left-justified modes are supported
- * - Power management is not supported
+ * - Power management is supported
  */
 
 #include <linux/module.h>
@@ -27,6 +27,7 @@
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <linux/i2c.h>
+#include <linux/delay.h>
 
 #include "cs4270.h"
 
@@ -56,6 +57,7 @@
 #define CS4270_FIRSTREG	0x01
 #define CS4270_LASTREG	0x08
 #define CS4270_NUMREGS	(CS4270_LASTREG - CS4270_FIRSTREG + 1)
+#define CS4270_I2C_INCR	0x80
 
 /* Bit masks for the CS4270 registers */
 #define CS4270_CHIPID_ID	0xF0
@@ -64,6 +66,8 @@
 #define CS4270_PWRCTL_PDN_ADC	0x20
 #define CS4270_PWRCTL_PDN_DAC	0x02
 #define CS4270_PWRCTL_PDN	0x01
+#define CS4270_PWRCTL_PDN_ALL	\
+	(CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN)
 #define CS4270_MODE_SPEED_MASK	0x30
 #define CS4270_MODE_1X		0x00
 #define CS4270_MODE_2X		0x10
@@ -109,6 +113,7 @@ struct cs4270_private {
 	unsigned int mclk; /* Input frequency of the MCLK pin */
 	unsigned int mode; /* The mode (I2S or left-justified) */
 	unsigned int slave_mode;
+	unsigned int manual_mute;
 };
 
 /**
@@ -295,7 +300,7 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec)
 	s32 length;
 
 	length = i2c_smbus_read_i2c_block_data(i2c_client,
-		CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache);
+		CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache);
 
 	if (length != CS4270_NUMREGS) {
 		dev_err(codec->dev, "i2c read failure, addr=0x%x\n",
@@ -453,7 +458,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
 }
 
 /**
- * cs4270_mute - enable/disable the CS4270 external mute
+ * cs4270_dai_mute - enable/disable the CS4270 external mute
  * @dai: the SOC DAI
  * @mute: 0 = disable mute, 1 = enable mute
  *
@@ -462,21 +467,52 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
  * board does not have the MUTEA or MUTEB pins connected to such circuitry,
  * then this function will do nothing.
  */
-static int cs4270_mute(struct snd_soc_dai *dai, int mute)
+static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct snd_soc_codec *codec = dai->codec;
+	struct cs4270_private *cs4270 = codec->private_data;
 	int reg6;
 
 	reg6 = snd_soc_read(codec, CS4270_MUTE);
 
 	if (mute)
 		reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
-	else
+	else {
 		reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
+		reg6 |= cs4270->manual_mute;
+	}
 
 	return snd_soc_write(codec, CS4270_MUTE, reg6);
 }
 
+/**
+ * cs4270_soc_put_mute - put callback for the 'Master Playback switch'
+ * 			 alsa control.
+ * @kcontrol: mixer control
+ * @ucontrol: control element information
+ *
+ * This function basically passes the arguments on to the generic
+ * snd_soc_put_volsw() function and saves the mute information in
+ * our private data structure. This is because we want to prevent
+ * cs4270_dai_mute() neglecting the user's decision to manually
+ * mute the codec's output.
+ *
+ * Returns 0 for success.
+ */
+static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct cs4270_private *cs4270 = codec->private_data;
+	int left = !ucontrol->value.integer.value[0];
+	int right = !ucontrol->value.integer.value[1];
+
+	cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) |
+			      (right ? CS4270_MUTE_DAC_B : 0);
+
+	return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
 /* A list of non-DAPM controls that the CS4270 supports */
 static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 	SOC_DOUBLE_R("Master Playback Volume",
@@ -486,7 +522,9 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 	SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
 	SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
 	SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
-	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0)
+	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
+	SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1,
+		snd_soc_get_volsw, cs4270_soc_put_mute),
 };
 
 /*
@@ -506,7 +544,7 @@ static struct snd_soc_dai_ops cs4270_dai_ops = {
 	.hw_params	= cs4270_hw_params,
 	.set_sysclk	= cs4270_set_dai_sysclk,
 	.set_fmt	= cs4270_set_dai_fmt,
-	.digital_mute	= cs4270_mute,
+	.digital_mute	= cs4270_dai_mute,
 };
 
 struct snd_soc_dai cs4270_dai = {
@@ -753,6 +791,57 @@ static struct i2c_device_id cs4270_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, cs4270_id);
 
+#ifdef CONFIG_PM
+
+/* This suspend/resume implementation can handle both - a simple standby
+ * where the codec remains powered, and a full suspend, where the voltage
+ * domain the codec is connected to is teared down and/or any other hardware
+ * reset condition is asserted.
+ *
+ * The codec's own power saving features are enabled in the suspend callback,
+ * and all registers are written back to the hardware when resuming.
+ */
+
+static int cs4270_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+	struct snd_soc_codec *codec = &cs4270->codec;
+	int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+
+	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+
+static int cs4270_i2c_resume(struct i2c_client *client)
+{
+	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+	struct snd_soc_codec *codec = &cs4270->codec;
+	int reg;
+
+	/* In case the device was put to hard reset during sleep, we need to
+	 * wait 500ns here before any I2C communication. */
+	ndelay(500);
+
+	/* first restore the entire register cache ... */
+	for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
+		u8 val = snd_soc_read(codec, reg);
+
+		if (i2c_smbus_write_byte_data(client, reg, val)) {
+			dev_err(codec->dev, "i2c write failed\n");
+			return -EIO;
+		}
+	}
+
+	/* ... then disable the power-down bits */
+	reg = snd_soc_read(codec, CS4270_PWRCTL);
+	reg &= ~CS4270_PWRCTL_PDN_ALL;
+
+	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+#else
+#define cs4270_i2c_suspend	NULL
+#define cs4270_i2c_resume	NULL
+#endif /* CONFIG_PM */
+
 /*
  * cs4270_i2c_driver - I2C device identification
  *
@@ -767,6 +856,8 @@ static struct i2c_driver cs4270_i2c_driver = {
 	.id_table = cs4270_id,
 	.probe = cs4270_i2c_probe,
 	.remove = cs4270_i2c_remove,
+	.suspend = cs4270_i2c_suspend,
+	.resume = cs4270_i2c_resume,
 };
 
 /*
diff --git a/sound/soc/codecs/spdif_transciever.c b/sound/soc/codecs/spdif_transciever.c
new file mode 100644
index 00000000000..218b33adad9
--- /dev/null
+++ b/sound/soc/codecs/spdif_transciever.c
@@ -0,0 +1,71 @@
+/*
+ * ALSA SoC SPDIF DIT driver
+ *
+ *  This driver is used by controllers which can operate in DIT (SPDI/F) where
+ *  no codec is needed.  This file provides stub codec that can be used
+ *  in these configurations. TI DaVinci Audio controller uses this driver.
+ *
+ * Author:      Steve Chen,  <schen@mvista.com>
+ * Copyright:   (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright:   (C) 2009  Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+
+#include "spdif_transciever.h"
+
+#define STUB_RATES	SNDRV_PCM_RATE_8000_96000
+#define STUB_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
+
+struct snd_soc_dai dit_stub_dai = {
+	.name		= "DIT",
+	.playback 	= {
+		.stream_name	= "Playback",
+		.channels_min	= 1,
+		.channels_max	= 384,
+		.rates		= STUB_RATES,
+		.formats	= STUB_FORMATS,
+	},
+};
+
+static int spdif_dit_probe(struct platform_device *pdev)
+{
+	dit_stub_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&dit_stub_dai);
+}
+
+static int spdif_dit_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&dit_stub_dai);
+	return 0;
+}
+
+static struct platform_driver spdif_dit_driver = {
+	.probe		= spdif_dit_probe,
+	.remove		= spdif_dit_remove,
+	.driver		= {
+		.name	= "spdif-dit",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init dit_modinit(void)
+{
+	return platform_driver_register(&spdif_dit_driver);
+}
+
+static void __exit dit_exit(void)
+{
+	platform_driver_unregister(&spdif_dit_driver);
+}
+
+module_init(dit_modinit);
+module_exit(dit_exit);
+
diff --git a/sound/soc/codecs/spdif_transciever.h b/sound/soc/codecs/spdif_transciever.h
new file mode 100644
index 00000000000..296f2eb6c4e
--- /dev/null
+++ b/sound/soc/codecs/spdif_transciever.h
@@ -0,0 +1,17 @@
+/*
+ * ALSA SoC DIT/DIR driver header
+ *
+ * Author:      Steve Chen,  <schen@mvista.com>
+ * Copyright:   (C) 2008 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef CODEC_STUBS_H
+#define CODEC_STUBS_H
+
+extern struct snd_soc_dai dit_stub_dai;
+
+#endif /* CODEC_STUBS_H */
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 87f606c7682..1fc4c8e0899 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -336,15 +336,17 @@ static int ssm2602_startup(struct snd_pcm_substream *substream,
 			master_runtime->sample_bits,
 			master_runtime->rate);
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
-					     master_runtime->sample_bits,
-					     master_runtime->sample_bits);
+		if (master_runtime->rate != 0)
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						     SNDRV_PCM_HW_PARAM_RATE,
+						     master_runtime->rate,
+						     master_runtime->rate);
+
+		if (master_runtime->sample_bits != 0)
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+						     master_runtime->sample_bits,
+						     master_runtime->sample_bits);
 
 		ssm2602->slave_substream = substream;
 	} else
@@ -372,6 +374,11 @@ static void ssm2602_shutdown(struct snd_pcm_substream *substream,
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct ssm2602_priv *ssm2602 = codec->private_data;
+
+	if (ssm2602->master_substream == substream)
+		ssm2602->master_substream = ssm2602->slave_substream;
+
+	ssm2602->slave_substream = NULL;
 	/* deactivate */
 	if (!codec->active)
 		ssm2602_write(codec, SSM2602_ACTIVE, 0);
@@ -497,11 +504,9 @@ static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
 	return 0;
 }
 
-#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
-		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
-		SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
-		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
-		SNDRV_PCM_RATE_96000)
+#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_32000 |\
+		SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+		SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
 
 #define SSM2602_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
 		SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
new file mode 100644
index 00000000000..8ad4b7b3e3b
--- /dev/null
+++ b/sound/soc/codecs/stac9766.c
@@ -0,0 +1,463 @@
+/*
+ * stac9766.c  --  ALSA SoC STAC9766 codec support
+ *
+ * Copyright 2009 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  Features:-
+ *
+ *   o Support for AC97 Codec, S/PDIF
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-of-simple.h>
+
+#include "stac9766.h"
+
+#define STAC9766_VERSION "0.10"
+
+/*
+ * STAC9766 register cache
+ */
+static const u16 stac9766_reg[] = {
+	0x6A90, 0x8000, 0x8000, 0x8000, /* 6 */
+	0x0000, 0x0000, 0x8008, 0x8008, /* e */
+	0x8808, 0x8808, 0x8808, 0x8808, /* 16 */
+	0x8808, 0x0000, 0x8000, 0x0000, /* 1e */
+	0x0000, 0x0000, 0x0000, 0x000f, /* 26 */
+	0x0a05, 0x0400, 0xbb80, 0x0000, /* 2e */
+	0x0000, 0xbb80, 0x0000, 0x0000, /* 36 */
+	0x0000, 0x2000, 0x0000, 0x0100, /* 3e */
+	0x0000, 0x0000, 0x0080, 0x0000, /* 46 */
+	0x0000, 0x0000, 0x0003, 0xffff, /* 4e */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 56 */
+	0x4000, 0x0000, 0x0000, 0x0000, /* 5e */
+	0x1201, 0xFFFF, 0xFFFF, 0x0000, /* 66 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 6e */
+	0x0000, 0x0000, 0x0000, 0x0006, /* 76 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 7e */
+};
+
+static const char *stac9766_record_mux[] = {"Mic", "CD", "Video", "AUX",
+			"Line", "Stereo Mix", "Mono Mix", "Phone"};
+static const char *stac9766_mono_mux[] = {"Mix", "Mic"};
+static const char *stac9766_mic_mux[] = {"Mic1", "Mic2"};
+static const char *stac9766_SPDIF_mux[] = {"PCM", "ADC Record"};
+static const char *stac9766_popbypass_mux[] = {"Normal", "Bypass Mixer"};
+static const char *stac9766_record_all_mux[] = {"All analog",
+	"Analog plus DAC"};
+static const char *stac9766_boost1[] = {"0dB", "10dB"};
+static const char *stac9766_boost2[] = {"0dB", "20dB"};
+static const char *stac9766_stereo_mic[] = {"Off", "On"};
+
+static const struct soc_enum stac9766_record_enum =
+	SOC_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, stac9766_record_mux);
+static const struct soc_enum stac9766_mono_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 9, 2, stac9766_mono_mux);
+static const struct soc_enum stac9766_mic_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 8, 2, stac9766_mic_mux);
+static const struct soc_enum stac9766_SPDIF_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_DA_CONTROL, 1, 2, stac9766_SPDIF_mux);
+static const struct soc_enum stac9766_popbypass_enum =
+	SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, stac9766_popbypass_mux);
+static const struct soc_enum stac9766_record_all_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 12, 2,
+			stac9766_record_all_mux);
+static const struct soc_enum stac9766_boost1_enum =
+	SOC_ENUM_SINGLE(AC97_MIC, 6, 2, stac9766_boost1); /* 0/10dB */
+static const struct soc_enum stac9766_boost2_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_ANALOG_SPECIAL, 2, 2, stac9766_boost2); /* 0/20dB */
+static const struct soc_enum stac9766_stereo_mic_enum =
+	SOC_ENUM_SINGLE(AC97_STAC_STEREO_MIC, 2, 1, stac9766_stereo_mic);
+
+static const DECLARE_TLV_DB_LINEAR(master_tlv, -4600, 0);
+static const DECLARE_TLV_DB_LINEAR(record_tlv, 0, 2250);
+static const DECLARE_TLV_DB_LINEAR(beep_tlv, -4500, 0);
+static const DECLARE_TLV_DB_LINEAR(mix_tlv, -3450, 1200);
+
+static const struct snd_kcontrol_new stac9766_snd_ac97_controls[] = {
+	SOC_DOUBLE_TLV("Speaker Volume", AC97_MASTER, 8, 0, 31, 1, master_tlv),
+	SOC_SINGLE("Speaker Switch", AC97_MASTER, 15, 1, 1),
+	SOC_DOUBLE_TLV("Headphone Volume", AC97_HEADPHONE, 8, 0, 31, 1,
+		       master_tlv),
+	SOC_SINGLE("Headphone Switch", AC97_HEADPHONE, 15, 1, 1),
+	SOC_SINGLE_TLV("Mono Out Volume", AC97_MASTER_MONO, 0, 31, 1,
+		       master_tlv),
+	SOC_SINGLE("Mono Out Switch", AC97_MASTER_MONO, 15, 1, 1),
+
+	SOC_DOUBLE_TLV("Record Volume", AC97_REC_GAIN, 8, 0, 15, 0, record_tlv),
+	SOC_SINGLE("Record Switch", AC97_REC_GAIN, 15, 1, 1),
+
+
+	SOC_SINGLE_TLV("Beep Volume", AC97_PC_BEEP, 1, 15, 1, beep_tlv),
+	SOC_SINGLE("Beep Switch", AC97_PC_BEEP, 15, 1, 1),
+	SOC_SINGLE("Beep Frequency", AC97_PC_BEEP, 5, 127, 1),
+	SOC_SINGLE_TLV("Phone Volume", AC97_PHONE, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Phone Switch", AC97_PHONE, 15, 1, 1),
+
+	SOC_ENUM("Mic Boost1", stac9766_boost1_enum),
+	SOC_ENUM("Mic Boost2", stac9766_boost2_enum),
+	SOC_SINGLE_TLV("Mic Volume", AC97_MIC, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Mic Switch", AC97_MIC, 15, 1, 1),
+	SOC_ENUM("Stereo Mic", stac9766_stereo_mic_enum),
+
+	SOC_DOUBLE_TLV("Line Volume", AC97_LINE, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Line Switch", AC97_LINE, 15, 1, 1),
+	SOC_DOUBLE_TLV("CD Volume", AC97_CD, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("CD Switch", AC97_CD, 15, 1, 1),
+	SOC_DOUBLE_TLV("AUX Volume", AC97_AUX, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("AUX Switch", AC97_AUX, 15, 1, 1),
+	SOC_DOUBLE_TLV("Video Volume", AC97_VIDEO, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("Video Switch", AC97_VIDEO, 15, 1, 1),
+
+	SOC_DOUBLE_TLV("DAC Volume", AC97_PCM, 8, 0, 31, 1, mix_tlv),
+	SOC_SINGLE("DAC Switch", AC97_PCM, 15, 1, 1),
+	SOC_SINGLE("Loopback Test Switch", AC97_GENERAL_PURPOSE, 7, 1, 0),
+	SOC_SINGLE("3D Volume", AC97_3D_CONTROL, 3, 2, 1),
+	SOC_SINGLE("3D Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
+
+	SOC_ENUM("SPDIF Mux", stac9766_SPDIF_enum),
+	SOC_ENUM("Mic1/2 Mux", stac9766_mic_enum),
+	SOC_ENUM("Record All Mux", stac9766_record_all_enum),
+	SOC_ENUM("Record Mux", stac9766_record_enum),
+	SOC_ENUM("Mono Mux", stac9766_mono_enum),
+	SOC_ENUM("Pop Bypass Mux", stac9766_popbypass_enum),
+};
+
+static int stac9766_ac97_write(struct snd_soc_codec *codec, unsigned int reg,
+			       unsigned int val)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg > AC97_STAC_PAGE0) {
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 0);
+		soc_ac97_ops.write(codec->ac97, reg, val);
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
+		return 0;
+	}
+	if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+		return -EIO;
+
+	soc_ac97_ops.write(codec->ac97, reg, val);
+	cache[reg / 2] = val;
+	return 0;
+}
+
+static unsigned int stac9766_ac97_read(struct snd_soc_codec *codec,
+				       unsigned int reg)
+{
+	u16 val = 0, *cache = codec->reg_cache;
+
+	if (reg > AC97_STAC_PAGE0) {
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 0);
+		val = soc_ac97_ops.read(codec->ac97, reg - AC97_STAC_PAGE0);
+		stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
+		return val;
+	}
+	if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+		return -EIO;
+
+	if (reg == AC97_RESET || reg == AC97_GPIO_STATUS ||
+		reg == AC97_INT_PAGING || reg == AC97_VENDOR_ID1 ||
+		reg == AC97_VENDOR_ID2) {
+
+		val = soc_ac97_ops.read(codec->ac97, reg);
+		return val;
+	}
+	return cache[reg / 2];
+}
+
+static int ac97_analog_prepare(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned short reg, vra;
+
+	vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+
+	vra |= 0x1; /* enable variable rate audio */
+
+	stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		reg = AC97_PCM_FRONT_DAC_RATE;
+	else
+		reg = AC97_PCM_LR_ADC_RATE;
+
+	return stac9766_ac97_write(codec, reg, runtime->rate);
+}
+
+static int ac97_digital_prepare(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned short reg, vra;
+
+	stac9766_ac97_write(codec, AC97_SPDIF, 0x2002);
+
+	vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+	vra |= 0x5; /* Enable VRA and SPDIF out */
+
+	stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+
+	reg = AC97_PCM_FRONT_DAC_RATE;
+
+	return stac9766_ac97_write(codec, reg, runtime->rate);
+}
+
+static int ac97_digital_trigger(struct snd_pcm_substream *substream,
+				int cmd, struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	unsigned short vra;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_STOP:
+		vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS);
+		vra &= !0x04;
+		stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra);
+		break;
+	}
+	return 0;
+}
+
+static int stac9766_set_bias_level(struct snd_soc_codec *codec,
+				   enum snd_soc_bias_level level)
+{
+	switch (level) {
+	case SND_SOC_BIAS_ON: /* full On */
+	case SND_SOC_BIAS_PREPARE: /* partial On */
+	case SND_SOC_BIAS_STANDBY: /* Off, with power */
+		stac9766_ac97_write(codec, AC97_POWERDOWN, 0x0000);
+		break;
+	case SND_SOC_BIAS_OFF: /* Off, without power */
+		/* disable everything including AC link */
+		stac9766_ac97_write(codec, AC97_POWERDOWN, 0xffff);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+static int stac9766_reset(struct snd_soc_codec *codec, int try_warm)
+{
+	if (try_warm && soc_ac97_ops.warm_reset) {
+		soc_ac97_ops.warm_reset(codec->ac97);
+		if (stac9766_ac97_read(codec, 0) == stac9766_reg[0])
+			return 1;
+	}
+
+	soc_ac97_ops.reset(codec->ac97);
+	if (soc_ac97_ops.warm_reset)
+		soc_ac97_ops.warm_reset(codec->ac97);
+	if (stac9766_ac97_read(codec, 0) != stac9766_reg[0])
+		return -EIO;
+	return 0;
+}
+
+static int stac9766_codec_suspend(struct platform_device *pdev,
+				  pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int stac9766_codec_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 id, reset;
+
+	reset = 0;
+	/* give the codec an AC97 warm reset to start the link */
+reset:
+	if (reset > 5) {
+		printk(KERN_ERR "stac9766 failed to resume");
+		return -EIO;
+	}
+	codec->ac97->bus->ops->warm_reset(codec->ac97);
+	id = soc_ac97_ops.read(codec->ac97, AC97_VENDOR_ID2);
+	if (id != 0x4c13) {
+		stac9766_reset(codec, 0);
+		reset++;
+		goto reset;
+	}
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
+		stac9766_set_bias_level(codec, SND_SOC_BIAS_ON);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops stac9766_dai_ops_analog = {
+	.prepare = ac97_analog_prepare,
+};
+
+static struct snd_soc_dai_ops stac9766_dai_ops_digital = {
+	.prepare = ac97_digital_prepare,
+	.trigger = ac97_digital_trigger,
+};
+
+struct snd_soc_dai stac9766_dai[] = {
+{
+	.name = "stac9766 analog",
+	.id = 0,
+	.ac97_control = 1,
+
+	/* stream cababilities */
+	.playback = {
+		.stream_name = "stac9766 analog",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SND_SOC_STD_AC97_FMTS,
+	},
+	.capture = {
+		.stream_name = "stac9766 analog",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SND_SOC_STD_AC97_FMTS,
+	},
+	/* alsa ops */
+	.ops = &stac9766_dai_ops_analog,
+},
+{
+	.name = "stac9766 IEC958",
+	.id = 1,
+	.ac97_control = 1,
+
+	/* stream cababilities */
+	.playback = {
+		.stream_name = "stac9766 IEC958",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_32000 | \
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE,
+	},
+	/* alsa ops */
+	.ops = &stac9766_dai_ops_digital,
+}
+};
+EXPORT_SYMBOL_GPL(stac9766_dai);
+
+static int stac9766_codec_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION);
+
+	socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (socdev->card->codec == NULL)
+		return -ENOMEM;
+	codec = socdev->card->codec;
+	mutex_init(&codec->mutex);
+
+	codec->reg_cache = kmemdup(stac9766_reg, sizeof(stac9766_reg),
+				   GFP_KERNEL);
+	if (codec->reg_cache == NULL) {
+		ret = -ENOMEM;
+		goto cache_err;
+	}
+	codec->reg_cache_size = sizeof(stac9766_reg);
+	codec->reg_cache_step = 2;
+
+	codec->name = "STAC9766";
+	codec->owner = THIS_MODULE;
+	codec->dai = stac9766_dai;
+	codec->num_dai = ARRAY_SIZE(stac9766_dai);
+	codec->write = stac9766_ac97_write;
+	codec->read = stac9766_ac97_read;
+	codec->set_bias_level = stac9766_set_bias_level;
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
+	if (ret < 0)
+		goto codec_err;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0)
+		goto pcm_err;
+
+	/* do a cold reset for the controller and then try
+	 * a warm reset followed by an optional cold reset for codec */
+	stac9766_reset(codec, 0);
+	ret = stac9766_reset(codec, 1);
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to reset STAC9766: AC97 link error\n");
+		goto reset_err;
+	}
+
+	stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	snd_soc_add_controls(codec, stac9766_snd_ac97_controls,
+			     ARRAY_SIZE(stac9766_snd_ac97_controls));
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0)
+		goto reset_err;
+	return 0;
+
+reset_err:
+	snd_soc_free_pcms(socdev);
+pcm_err:
+	snd_soc_free_ac97_codec(codec);
+codec_err:
+	kfree(codec->private_data);
+cache_err:
+	kfree(socdev->card->codec);
+	socdev->card->codec = NULL;
+	return ret;
+}
+
+static int stac9766_codec_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	if (codec == NULL)
+		return 0;
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_free_ac97_codec(codec);
+	kfree(codec->reg_cache);
+	kfree(codec);
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_stac9766 = {
+	.probe = stac9766_codec_probe,
+	.remove = stac9766_codec_remove,
+	.suspend = stac9766_codec_suspend,
+	.resume = stac9766_codec_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_stac9766);
+
+MODULE_DESCRIPTION("ASoC stac9766 driver");
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/stac9766.h b/sound/soc/codecs/stac9766.h
new file mode 100644
index 00000000000..65642eb8393
--- /dev/null
+++ b/sound/soc/codecs/stac9766.h
@@ -0,0 +1,21 @@
+/*
+ * stac9766.h  --  STAC9766 Soc Audio driver
+ */
+
+#ifndef _STAC9766_H
+#define _STAC9766_H
+
+#define AC97_STAC_PAGE0 0x1000
+#define AC97_STAC_DA_CONTROL (AC97_STAC_PAGE0 | 0x6A)
+#define AC97_STAC_ANALOG_SPECIAL (AC97_STAC_PAGE0 | 0x6E)
+#define AC97_STAC_STEREO_MIC 0x78
+
+/* STAC9766 DAI ID's */
+#define STAC9766_DAI_AC97_ANALOG		0
+#define STAC9766_DAI_AC97_DIGITAL		1
+
+extern struct snd_soc_dai stac9766_dai[];
+extern struct snd_soc_codec_device soc_codec_dev_stac9766;
+
+
+#endif
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index c3f4afb5d01..0b8dcb5cd72 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -86,7 +86,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
 	 */
 
 	if ((reg < 0 || reg > 9) && (reg != 15)) {
-		printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg);
+		printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
 		return -1;
 	}
 
@@ -98,7 +98,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
 	if (codec->hw_write(codec->control_data, data, 2) == 2)
 		return 0;
 
-	printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__,
+	printk(KERN_ERR "%s cannot write %03x to register R%u\n", __func__,
 	       value, reg);
 
 	return -EIO;
@@ -273,14 +273,14 @@ static const unsigned short sr_valid_mask[] = {
  * Every divisor is a factor of 11*12
  */
 #define SR_MULT (11*12)
-#define A(x) (x) ? (SR_MULT/x) : 0
+#define A(x) (SR_MULT/x)
 static const unsigned char sr_adc_mult_table[] = {
-	A(2), A(2), A(12), A(12),  A(0), A(0), A(3), A(1),
-	A(2), A(2), A(11), A(11),  A(0), A(0), A(0), A(1)
+	A(2), A(2), A(12), A(12),  0, 0, A(3), A(1),
+	A(2), A(2), A(11), A(11),  0, 0, 0, A(1)
 };
 static const unsigned char sr_dac_mult_table[] = {
-	A(2), A(12), A(2), A(12),  A(0), A(0), A(3), A(1),
-	A(2), A(11), A(2), A(11),  A(0), A(0), A(0), A(1)
+	A(2), A(12), A(2), A(12),  0, 0, A(3), A(1),
+	A(2), A(11), A(2), A(11),  0, 0, 0, A(1)
 };
 
 static unsigned get_score(int adc, int adc_l, int adc_h, int need_adc,
@@ -523,6 +523,8 @@ static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_I2S:
 		iface_reg |= TLV320AIC23_FOR_I2S;
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface_reg |= TLV320AIC23_LRP_ON;
 	case SND_SOC_DAIFMT_DSP_B:
 		iface_reg |= TLV320AIC23_FOR_DSP;
 		break;
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index df7c8c281d2..4dbb853eef5 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -115,6 +115,7 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
 	0x00, /* REG_VIBRA_PWM_SET	(0x47)	*/
 	0x00, /* REG_ANAMIC_GAIN	(0x48)	*/
 	0x00, /* REG_MISC_SET_2		(0x49)	*/
+	0x00, /* REG_SW_SHADOW		(0x4A)	- Shadow, non HW register */
 };
 
 /* codec private data */
@@ -125,6 +126,17 @@ struct twl4030_priv {
 
 	struct snd_pcm_substream *master_substream;
 	struct snd_pcm_substream *slave_substream;
+
+	unsigned int configured;
+	unsigned int rate;
+	unsigned int sample_bits;
+	unsigned int channels;
+
+	unsigned int sysclk;
+
+	/* Headset output state handling */
+	unsigned int hsl_enabled;
+	unsigned int hsr_enabled;
 };
 
 /*
@@ -161,7 +173,11 @@ static int twl4030_write(struct snd_soc_codec *codec,
 			unsigned int reg, unsigned int value)
 {
 	twl4030_write_reg_cache(codec, reg, value);
-	return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg);
+	if (likely(reg < TWL4030_REG_SW_SHADOW))
+		return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value,
+					    reg);
+	else
+		return 0;
 }
 
 static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
@@ -188,6 +204,7 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
 
 static void twl4030_init_chip(struct snd_soc_codec *codec)
 {
+	u8 *cache = codec->reg_cache;
 	int i;
 
 	/* clear CODECPDZ prior to setting register defaults */
@@ -195,7 +212,7 @@ static void twl4030_init_chip(struct snd_soc_codec *codec)
 
 	/* set all audio section registers to reasonable defaults */
 	for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
-		twl4030_write(codec, i,	twl4030_reg[i]);
+		twl4030_write(codec, i,	cache[i]);
 
 }
 
@@ -232,7 +249,7 @@ static void twl4030_codec_mute(struct snd_soc_codec *codec, int mute)
 					TWL4030_REG_PRECKL_CTL);
 		reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL);
 		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
-					reg_val & (~TWL4030_PRECKL_GAIN),
+					reg_val & (~TWL4030_PRECKR_GAIN),
 					TWL4030_REG_PRECKR_CTL);
 
 		/* Disable PLL */
@@ -316,104 +333,60 @@ static void twl4030_power_down(struct snd_soc_codec *codec)
 }
 
 /* Earpiece */
-static const char *twl4030_earpiece_texts[] =
-		{"Off", "DACL1", "DACL2", "DACR1"};
-
-static const unsigned int twl4030_earpiece_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_earpiece_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_earpiece_texts),
-			twl4030_earpiece_texts,
-			twl4030_earpiece_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_earpiece_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_earpiece_enum);
+static const struct snd_kcontrol_new twl4030_dapm_earpiece_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_EAR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_EAR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_EAR_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_EAR_CTL, 3, 1, 0),
+};
 
 /* PreDrive Left */
-static const char *twl4030_predrivel_texts[] =
-		{"Off", "DACL1", "DACL2", "DACR2"};
-
-static const unsigned int twl4030_predrivel_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_predrivel_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_predrivel_texts),
-			twl4030_predrivel_texts,
-			twl4030_predrivel_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_predrivel_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_predrivel_enum);
+static const struct snd_kcontrol_new twl4030_dapm_predrivel_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDL_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PREDL_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDL_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDL_CTL, 3, 1, 0),
+};
 
 /* PreDrive Right */
-static const char *twl4030_predriver_texts[] =
-		{"Off", "DACR1", "DACR2", "DACL2"};
-
-static const unsigned int twl4030_predriver_values[] =
-		{0x0, 0x1, 0x2, 0x4};
-
-static const struct soc_enum twl4030_predriver_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7,
-			ARRAY_SIZE(twl4030_predriver_texts),
-			twl4030_predriver_texts,
-			twl4030_predriver_values);
-
-static const struct snd_kcontrol_new twl4030_dapm_predriver_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_predriver_enum);
+static const struct snd_kcontrol_new twl4030_dapm_predriver_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PREDR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDR_CTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDR_CTL, 3, 1, 0),
+};
 
 /* Headset Left */
-static const char *twl4030_hsol_texts[] =
-		{"Off", "DACL1", "DACL2"};
-
-static const struct soc_enum twl4030_hsol_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1,
-			ARRAY_SIZE(twl4030_hsol_texts),
-			twl4030_hsol_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_hsol_control =
-SOC_DAPM_ENUM("Route", twl4030_hsol_enum);
+static const struct snd_kcontrol_new twl4030_dapm_hsol_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_HS_SEL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_HS_SEL, 2, 1, 0),
+};
 
 /* Headset Right */
-static const char *twl4030_hsor_texts[] =
-		{"Off", "DACR1", "DACR2"};
-
-static const struct soc_enum twl4030_hsor_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4,
-			ARRAY_SIZE(twl4030_hsor_texts),
-			twl4030_hsor_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_hsor_control =
-SOC_DAPM_ENUM("Route", twl4030_hsor_enum);
+static const struct snd_kcontrol_new twl4030_dapm_hsor_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 3, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_HS_SEL, 4, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_HS_SEL, 5, 1, 0),
+};
 
 /* Carkit Left */
-static const char *twl4030_carkitl_texts[] =
-		{"Off", "DACL1", "DACL2"};
-
-static const struct soc_enum twl4030_carkitl_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1,
-			ARRAY_SIZE(twl4030_carkitl_texts),
-			twl4030_carkitl_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_carkitl_control =
-SOC_DAPM_ENUM("Route", twl4030_carkitl_enum);
+static const struct snd_kcontrol_new twl4030_dapm_carkitl_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKL_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PRECKL_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PRECKL_CTL, 2, 1, 0),
+};
 
 /* Carkit Right */
-static const char *twl4030_carkitr_texts[] =
-		{"Off", "DACR1", "DACR2"};
-
-static const struct soc_enum twl4030_carkitr_enum =
-	SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1,
-			ARRAY_SIZE(twl4030_carkitr_texts),
-			twl4030_carkitr_texts);
-
-static const struct snd_kcontrol_new twl4030_dapm_carkitr_control =
-SOC_DAPM_ENUM("Route", twl4030_carkitr_enum);
+static const struct snd_kcontrol_new twl4030_dapm_carkitr_controls[] = {
+	SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKR_CTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PRECKR_CTL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PRECKR_CTL, 2, 1, 0),
+};
 
 /* Handsfree Left */
 static const char *twl4030_handsfreel_texts[] =
-		{"Voice", "DACL1", "DACL2", "DACR2"};
+		{"Voice", "AudioL1", "AudioL2", "AudioR2"};
 
 static const struct soc_enum twl4030_handsfreel_enum =
 	SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0,
@@ -423,9 +396,13 @@ static const struct soc_enum twl4030_handsfreel_enum =
 static const struct snd_kcontrol_new twl4030_dapm_handsfreel_control =
 SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum);
 
+/* Handsfree Left virtual mute */
+static const struct snd_kcontrol_new twl4030_dapm_handsfreelmute_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 0, 1, 0);
+
 /* Handsfree Right */
 static const char *twl4030_handsfreer_texts[] =
-		{"Voice", "DACR1", "DACR2", "DACL2"};
+		{"Voice", "AudioR1", "AudioR2", "AudioL2"};
 
 static const struct soc_enum twl4030_handsfreer_enum =
 	SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0,
@@ -435,37 +412,48 @@ static const struct soc_enum twl4030_handsfreer_enum =
 static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control =
 SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum);
 
-/* Left analog microphone selection */
-static const char *twl4030_analoglmic_texts[] =
-		{"Off", "Main mic", "Headset mic", "AUXL", "Carkit mic"};
+/* Handsfree Right virtual mute */
+static const struct snd_kcontrol_new twl4030_dapm_handsfreermute_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_SW_SHADOW, 1, 1, 0);
 
-static const unsigned int twl4030_analoglmic_values[] =
-		{0x0, 0x1, 0x2, 0x4, 0x8};
+/* Vibra */
+/* Vibra audio path selection */
+static const char *twl4030_vibra_texts[] =
+		{"AudioL1", "AudioR1", "AudioL2", "AudioR2"};
 
-static const struct soc_enum twl4030_analoglmic_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICL, 0, 0xf,
-			ARRAY_SIZE(twl4030_analoglmic_texts),
-			twl4030_analoglmic_texts,
-			twl4030_analoglmic_values);
+static const struct soc_enum twl4030_vibra_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 2,
+			ARRAY_SIZE(twl4030_vibra_texts),
+			twl4030_vibra_texts);
 
-static const struct snd_kcontrol_new twl4030_dapm_analoglmic_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_analoglmic_enum);
+static const struct snd_kcontrol_new twl4030_dapm_vibra_control =
+SOC_DAPM_ENUM("Route", twl4030_vibra_enum);
 
-/* Right analog microphone selection */
-static const char *twl4030_analogrmic_texts[] =
-		{"Off", "Sub mic", "AUXR"};
+/* Vibra path selection: local vibrator (PWM) or audio driven */
+static const char *twl4030_vibrapath_texts[] =
+		{"Local vibrator", "Audio"};
 
-static const unsigned int twl4030_analogrmic_values[] =
-		{0x0, 0x1, 0x4};
+static const struct soc_enum twl4030_vibrapath_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 4,
+			ARRAY_SIZE(twl4030_vibrapath_texts),
+			twl4030_vibrapath_texts);
 
-static const struct soc_enum twl4030_analogrmic_enum =
-	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICR, 0, 0x5,
-			ARRAY_SIZE(twl4030_analogrmic_texts),
-			twl4030_analogrmic_texts,
-			twl4030_analogrmic_values);
+static const struct snd_kcontrol_new twl4030_dapm_vibrapath_control =
+SOC_DAPM_ENUM("Route", twl4030_vibrapath_enum);
 
-static const struct snd_kcontrol_new twl4030_dapm_analogrmic_control =
-SOC_DAPM_VALUE_ENUM("Route", twl4030_analogrmic_enum);
+/* Left analog microphone selection */
+static const struct snd_kcontrol_new twl4030_dapm_analoglmic_controls[] = {
+	SOC_DAPM_SINGLE("Main mic", TWL4030_REG_ANAMICL, 0, 1, 0),
+	SOC_DAPM_SINGLE("Headset mic", TWL4030_REG_ANAMICL, 1, 1, 0),
+	SOC_DAPM_SINGLE("AUXL", TWL4030_REG_ANAMICL, 2, 1, 0),
+	SOC_DAPM_SINGLE("Carkit mic", TWL4030_REG_ANAMICL, 3, 1, 0),
+};
+
+/* Right analog microphone selection */
+static const struct snd_kcontrol_new twl4030_dapm_analogrmic_controls[] = {
+	SOC_DAPM_SINGLE("Sub mic", TWL4030_REG_ANAMICR, 0, 1, 0),
+	SOC_DAPM_SINGLE("AUXR", TWL4030_REG_ANAMICR, 2, 1, 0),
+};
 
 /* TX1 L/R Analog/Digital microphone selection */
 static const char *twl4030_micpathtx1_texts[] =
@@ -507,6 +495,10 @@ static const struct snd_kcontrol_new twl4030_dapm_abypassr2_control =
 static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control =
 	SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL2_APGA_CTL, 2, 1, 0);
 
+/* Analog bypass for Voice */
+static const struct snd_kcontrol_new twl4030_dapm_abypassv_control =
+	SOC_DAPM_SINGLE("Switch", TWL4030_REG_VDL_APGA_CTL, 2, 1, 0);
+
 /* Digital bypass gain, 0 mutes the bypass */
 static const unsigned int twl4030_dapm_dbypass_tlv[] = {
 	TLV_DB_RANGE_HEAD(2),
@@ -526,6 +518,18 @@ static const struct snd_kcontrol_new twl4030_dapm_dbypassr_control =
 			TWL4030_REG_ATX2ARXPGA, 0, 7, 0,
 			twl4030_dapm_dbypass_tlv);
 
+/*
+ * Voice Sidetone GAIN volume control:
+ * from -51 to -10 dB in 1 dB steps (mute instead of -51 dB)
+ */
+static DECLARE_TLV_DB_SCALE(twl4030_dapm_dbypassv_tlv, -5100, 100, 1);
+
+/* Digital bypass voice: sidetone (VUL -> VDL)*/
+static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control =
+	SOC_DAPM_SINGLE_TLV("Volume",
+			TWL4030_REG_VSTPGA, 0, 0x29, 0,
+			twl4030_dapm_dbypassv_tlv);
+
 static int micpath_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
@@ -556,63 +560,143 @@ static int micpath_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
-static int handsfree_event(struct snd_soc_dapm_widget *w,
-		struct snd_kcontrol *kcontrol, int event)
+static void handsfree_ramp(struct snd_soc_codec *codec, int reg, int ramp)
 {
-	struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
 	unsigned char hs_ctl;
 
-	hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
+	hs_ctl = twl4030_read_reg_cache(codec, reg);
 
-	if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
+	if (ramp) {
+		/* HF ramp-up */
+		hs_ctl |= TWL4030_HF_CTL_REF_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(10);
 		hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(40);
 		hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
 		hs_ctl |= TWL4030_HF_CTL_HB_EN;
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		twl4030_write(codec, reg, hs_ctl);
 	} else {
-		hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
-				| TWL4030_HF_CTL_HB_EN);
-		twl4030_write(w->codec, e->reg, hs_ctl);
+		/* HF ramp-down */
+		hs_ctl &= ~TWL4030_HF_CTL_LOOP_EN;
+		hs_ctl &= ~TWL4030_HF_CTL_HB_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		hs_ctl &= ~TWL4030_HF_CTL_RAMP_EN;
+		twl4030_write(codec, reg, hs_ctl);
+		udelay(40);
+		hs_ctl &= ~TWL4030_HF_CTL_REF_EN;
+		twl4030_write(codec, reg, hs_ctl);
 	}
+}
 
+static int handsfreelpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		handsfree_ramp(w->codec, TWL4030_REG_HFL_CTL, 0);
+		break;
+	}
 	return 0;
 }
 
-static int headsetl_event(struct snd_soc_dapm_widget *w,
+static int handsfreerpga_event(struct snd_soc_dapm_widget *w,
 		struct snd_kcontrol *kcontrol, int event)
 {
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		handsfree_ramp(w->codec, TWL4030_REG_HFR_CTL, 0);
+		break;
+	}
+	return 0;
+}
+
+static void headset_ramp(struct snd_soc_codec *codec, int ramp)
+{
 	unsigned char hs_gain, hs_pop;
+	struct twl4030_priv *twl4030 = codec->private_data;
+	/* Base values for ramp delay calculation: 2^19 - 2^26 */
+	unsigned int ramp_base[] = {524288, 1048576, 2097152, 4194304,
+				    8388608, 16777216, 33554432, 67108864};
 
-	/* Save the current volume */
-	hs_gain = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_GAIN_SET);
-	hs_pop = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_POPN_SET);
+	hs_gain = twl4030_read_reg_cache(codec, TWL4030_REG_HS_GAIN_SET);
+	hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
 
-	switch (event) {
-	case SND_SOC_DAPM_POST_PMU:
-		/* Do the anti-pop/bias ramp enable according to the TRM */
+	if (ramp) {
+		/* Headset ramp-up according to the TRM */
 		hs_pop |= TWL4030_VMID_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-		/* Is this needed? Can we just use whatever gain here? */
-		twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET,
-				(hs_gain & (~0x0f)) | 0x0a);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
 		hs_pop |= TWL4030_RAMP_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-
-		/* Restore the original volume */
-		twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
-		break;
-	case SND_SOC_DAPM_POST_PMD:
-		/* Do the anti-pop/bias ramp disable according to the TRM */
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	} else {
+		/* Headset ramp-down _not_ according to
+		 * the TRM, but in a way that it is working */
 		hs_pop &= ~TWL4030_RAMP_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		/* Wait ramp delay time + 1, so the VMID can settle */
+		mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] /
+			twl4030->sysclk) + 1);
 		/* Bypass the reg_cache to mute the headset */
 		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
 					hs_gain & (~0x0f),
 					TWL4030_REG_HS_GAIN_SET);
+
 		hs_pop &= ~TWL4030_VMID_EN;
-		twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+		twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	}
+}
+
+static int headsetlpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = w->codec->private_data;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Do the ramp-up only once */
+		if (!twl4030->hsr_enabled)
+			headset_ramp(w->codec, 1);
+
+		twl4030->hsl_enabled = 1;
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		/* Do the ramp-down only if both headsetL/R is disabled */
+		if (!twl4030->hsr_enabled)
+			headset_ramp(w->codec, 0);
+
+		twl4030->hsl_enabled = 0;
+		break;
+	}
+	return 0;
+}
+
+static int headsetrpga_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = w->codec->private_data;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Do the ramp-up only once */
+		if (!twl4030->hsl_enabled)
+			headset_ramp(w->codec, 1);
+
+		twl4030->hsr_enabled = 1;
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		/* Do the ramp-down only if both headsetL/R is disabled */
+		if (!twl4030->hsl_enabled)
+			headset_ramp(w->codec, 0);
+
+		twl4030->hsr_enabled = 0;
 		break;
 	}
 	return 0;
@@ -624,7 +708,7 @@ static int bypass_event(struct snd_soc_dapm_widget *w,
 	struct soc_mixer_control *m =
 		(struct soc_mixer_control *)w->kcontrols->private_value;
 	struct twl4030_priv *twl4030 = w->codec->private_data;
-	unsigned char reg;
+	unsigned char reg, misc;
 
 	reg = twl4030_read_reg_cache(w->codec, m->reg);
 
@@ -636,14 +720,34 @@ static int bypass_event(struct snd_soc_dapm_widget *w,
 		else
 			twl4030->bypass_state &=
 				~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL));
+	} else if (m->reg == TWL4030_REG_VDL_APGA_CTL) {
+		/* Analog voice bypass */
+		if (reg & (1 << m->shift))
+			twl4030->bypass_state |= (1 << 4);
+		else
+			twl4030->bypass_state &= ~(1 << 4);
+	} else if (m->reg == TWL4030_REG_VSTPGA) {
+		/* Voice digital bypass */
+		if (reg)
+			twl4030->bypass_state |= (1 << 5);
+		else
+			twl4030->bypass_state &= ~(1 << 5);
 	} else {
 		/* Digital bypass */
 		if (reg & (0x7 << m->shift))
-			twl4030->bypass_state |= (1 << (m->shift ? 5 : 4));
+			twl4030->bypass_state |= (1 << (m->shift ? 7 : 6));
 		else
-			twl4030->bypass_state &= ~(1 << (m->shift ? 5 : 4));
+			twl4030->bypass_state &= ~(1 << (m->shift ? 7 : 6));
 	}
 
+	/* Enable master analog loopback mode if any analog switch is enabled*/
+	misc = twl4030_read_reg_cache(w->codec, TWL4030_REG_MISC_SET_1);
+	if (twl4030->bypass_state & 0x1F)
+		misc |= TWL4030_FMLOOP_EN;
+	else
+		misc &= ~TWL4030_FMLOOP_EN;
+	twl4030_write(w->codec, TWL4030_REG_MISC_SET_1, misc);
+
 	if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) {
 		if (twl4030->bypass_state)
 			twl4030_codec_mute(w->codec, 0);
@@ -810,6 +914,48 @@ static int snd_soc_put_volsw_r2_twl4030(struct snd_kcontrol *kcontrol,
 	return err;
 }
 
+/* Codec operation modes */
+static const char *twl4030_op_modes_texts[] = {
+	"Option 2 (voice/audio)", "Option 1 (audio)"
+};
+
+static const struct soc_enum twl4030_op_modes_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_CODEC_MODE, 0,
+			ARRAY_SIZE(twl4030_op_modes_texts),
+			twl4030_op_modes_texts);
+
+int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct twl4030_priv *twl4030 = codec->private_data;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned short val;
+	unsigned short mask, bitmask;
+
+	if (twl4030->configured) {
+		printk(KERN_ERR "twl4030 operation mode cannot be "
+			"changed on-the-fly\n");
+		return -EBUSY;
+	}
+
+	for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
+		;
+	if (ucontrol->value.enumerated.item[0] > e->max - 1)
+		return -EINVAL;
+
+	val = ucontrol->value.enumerated.item[0] << e->shift_l;
+	mask = (bitmask - 1) << e->shift_l;
+	if (e->shift_l != e->shift_r) {
+		if (ucontrol->value.enumerated.item[1] > e->max - 1)
+			return -EINVAL;
+		val |= ucontrol->value.enumerated.item[1] << e->shift_r;
+		mask |= (bitmask - 1) << e->shift_r;
+	}
+
+	return snd_soc_update_bits(codec, e->reg, mask, val);
+}
+
 /*
  * FGAIN volume control:
  * from -62 to 0 dB in 1 dB steps (mute instead of -63 dB)
@@ -824,6 +970,12 @@ static DECLARE_TLV_DB_SCALE(digital_fine_tlv, -6300, 100, 1);
 static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0);
 
 /*
+ * Voice Downlink GAIN volume control:
+ * from -37 to 12 dB in 1 dB steps (mute instead of -37 dB)
+ */
+static DECLARE_TLV_DB_SCALE(digital_voice_downlink_tlv, -3700, 100, 1);
+
+/*
  * Analog playback gain
  * -24 dB to 12 dB in 2 dB steps
  */
@@ -864,7 +1016,32 @@ static const struct soc_enum twl4030_rampdelay_enum =
 			ARRAY_SIZE(twl4030_rampdelay_texts),
 			twl4030_rampdelay_texts);
 
+/* Vibra H-bridge direction mode */
+static const char *twl4030_vibradirmode_texts[] = {
+	"Vibra H-bridge direction", "Audio data MSB",
+};
+
+static const struct soc_enum twl4030_vibradirmode_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 5,
+			ARRAY_SIZE(twl4030_vibradirmode_texts),
+			twl4030_vibradirmode_texts);
+
+/* Vibra H-bridge direction */
+static const char *twl4030_vibradir_texts[] = {
+	"Positive polarity", "Negative polarity",
+};
+
+static const struct soc_enum twl4030_vibradir_enum =
+	SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 1,
+			ARRAY_SIZE(twl4030_vibradir_texts),
+			twl4030_vibradir_texts);
+
 static const struct snd_kcontrol_new twl4030_snd_controls[] = {
+	/* Codec operation mode control */
+	SOC_ENUM_EXT("Codec Operation Mode", twl4030_op_modes_enum,
+		snd_soc_get_enum_double,
+		snd_soc_put_twl4030_opmode_enum_double),
+
 	/* Common playback gain controls */
 	SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume",
 		TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
@@ -893,6 +1070,16 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = {
 		TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
 		1, 1, 0),
 
+	/* Common voice downlink gain controls */
+	SOC_SINGLE_TLV("DAC Voice Digital Downlink Volume",
+		TWL4030_REG_VRXPGA, 0, 0x31, 0, digital_voice_downlink_tlv),
+
+	SOC_SINGLE_TLV("DAC Voice Analog Downlink Volume",
+		TWL4030_REG_VDL_APGA_CTL, 3, 0x12, 1, analog_tlv),
+
+	SOC_SINGLE("DAC Voice Analog Downlink Switch",
+		TWL4030_REG_VDL_APGA_CTL, 1, 1, 0),
+
 	/* Separate output gain controls */
 	SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume",
 		TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL,
@@ -920,6 +1107,9 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = {
 		0, 3, 5, 0, input_gain_tlv),
 
 	SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum),
+
+	SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum),
+	SOC_ENUM("Vibra H-bridge direction", twl4030_vibradir_enum),
 };
 
 static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
@@ -947,26 +1137,19 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("CARKITR"),
 	SND_SOC_DAPM_OUTPUT("HFL"),
 	SND_SOC_DAPM_OUTPUT("HFR"),
+	SND_SOC_DAPM_OUTPUT("VIBRA"),
 
 	/* DACs */
-	SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback",
+	SND_SOC_DAPM_DAC("DAC Right1", "Right Front HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback",
+	SND_SOC_DAPM_DAC("DAC Left1", "Left Front HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback",
+	SND_SOC_DAPM_DAC("DAC Right2", "Right Rear HiFi Playback",
 			SND_SOC_NOPM, 0, 0),
-	SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback",
+	SND_SOC_DAPM_DAC("DAC Left2", "Left Rear HiFi Playback",
+			SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC("DAC Voice", "Voice Playback",
 			SND_SOC_NOPM, 0, 0),
-
-	/* Analog PGAs */
-	SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXL1_APGA", TWL4030_REG_ARXL1_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXR2_APGA", TWL4030_REG_ARXR2_APGA_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL,
-			0, 0, NULL, 0),
 
 	/* Analog bypasses */
 	SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0,
@@ -981,6 +1164,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_SWITCH_E("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0,
 			&twl4030_dapm_abypassl2_control,
 			bypass_event, SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("Voice Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassv_control,
+			bypass_event, SND_SOC_DAPM_POST_REG),
 
 	/* Digital bypasses */
 	SND_SOC_DAPM_SWITCH_E("Left Digital Loopback", SND_SOC_NOPM, 0, 0,
@@ -989,43 +1175,88 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0,
 			&twl4030_dapm_dbypassr_control, bypass_event,
 			SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("Voice Digital Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_dbypassv_control, bypass_event,
+			SND_SOC_DAPM_POST_REG),
 
-	SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			0, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			1, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			2, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", TWL4030_REG_AVDAC_CTL,
-			3, 0, NULL, 0),
-
-	/* Output MUX controls */
+	/* Digital mixers, power control for the physical DACs */
+	SND_SOC_DAPM_MIXER("Digital R1 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital L1 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 1, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital R2 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 2, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital L2 Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 3, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Digital Voice Playback Mixer",
+			TWL4030_REG_AVDAC_CTL, 4, 0, NULL, 0),
+
+	/* Analog mixers, power control for the physical PGAs */
+	SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer",
+			TWL4030_REG_ARXR1_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer",
+			TWL4030_REG_ARXL1_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer",
+			TWL4030_REG_ARXR2_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer",
+			TWL4030_REG_ARXL2_APGA_CTL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_MIXER("Analog Voice Playback Mixer",
+			TWL4030_REG_VDL_APGA_CTL, 0, 0, NULL, 0),
+
+	/* Output MIXER controls */
 	/* Earpiece */
-	SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_earpiece_control),
+	SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_earpiece_controls[0],
+			ARRAY_SIZE(twl4030_dapm_earpiece_controls)),
 	/* PreDrivL/R */
-	SND_SOC_DAPM_VALUE_MUX("PredriveL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_predrivel_control),
-	SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_predriver_control),
+	SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_predrivel_controls[0],
+			ARRAY_SIZE(twl4030_dapm_predrivel_controls)),
+	SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_predriver_controls[0],
+			ARRAY_SIZE(twl4030_dapm_predriver_controls)),
 	/* HeadsetL/R */
-	SND_SOC_DAPM_MUX_E("HeadsetL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_hsol_control, headsetl_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_hsor_control),
+	SND_SOC_DAPM_MIXER("HeadsetL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_hsol_controls[0],
+			ARRAY_SIZE(twl4030_dapm_hsol_controls)),
+	SND_SOC_DAPM_PGA_E("HeadsetL PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, headsetlpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MIXER("HeadsetR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_hsor_controls[0],
+			ARRAY_SIZE(twl4030_dapm_hsor_controls)),
+	SND_SOC_DAPM_PGA_E("HeadsetR PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, headsetrpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
 	/* CarkitL/R */
-	SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_carkitl_control),
-	SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_carkitr_control),
+	SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_carkitl_controls[0],
+			ARRAY_SIZE(twl4030_dapm_carkitl_controls)),
+	SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_carkitr_controls[0],
+			ARRAY_SIZE(twl4030_dapm_carkitr_controls)),
+
+	/* Output MUX controls */
 	/* HandsfreeL/R */
-	SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
-		&twl4030_dapm_handsfreel_control, handsfree_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
-		&twl4030_dapm_handsfreer_control, handsfree_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MUX("HandsfreeL Mux", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_handsfreel_control),
+	SND_SOC_DAPM_SWITCH("HandsfreeL Switch", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_handsfreelmute_control),
+	SND_SOC_DAPM_PGA_E("HandsfreeL PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, handsfreelpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MUX("HandsfreeR Mux", SND_SOC_NOPM, 5, 0,
+		&twl4030_dapm_handsfreer_control),
+	SND_SOC_DAPM_SWITCH("HandsfreeR Switch", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_handsfreermute_control),
+	SND_SOC_DAPM_PGA_E("HandsfreeR PGA", SND_SOC_NOPM,
+			0, 0, NULL, 0, handsfreerpga_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	/* Vibra */
+	SND_SOC_DAPM_MUX("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0,
+		&twl4030_dapm_vibra_control),
+	SND_SOC_DAPM_MUX("Vibra Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_vibrapath_control),
 
 	/* Introducing four virtual ADC, since TWL4030 have four channel for
 	   capture */
@@ -1050,11 +1281,15 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
 		SND_SOC_DAPM_POST_REG),
 
-	/* Analog input muxes with switch for the capture amplifiers */
-	SND_SOC_DAPM_VALUE_MUX("Analog Left Capture Route",
-		TWL4030_REG_ANAMICL, 4, 0, &twl4030_dapm_analoglmic_control),
-	SND_SOC_DAPM_VALUE_MUX("Analog Right Capture Route",
-		TWL4030_REG_ANAMICR, 4, 0, &twl4030_dapm_analogrmic_control),
+	/* Analog input mixers for the capture amplifiers */
+	SND_SOC_DAPM_MIXER("Analog Left Capture Route",
+		TWL4030_REG_ANAMICL, 4, 0,
+		&twl4030_dapm_analoglmic_controls[0],
+		ARRAY_SIZE(twl4030_dapm_analoglmic_controls)),
+	SND_SOC_DAPM_MIXER("Analog Right Capture Route",
+		TWL4030_REG_ANAMICR, 4, 0,
+		&twl4030_dapm_analogrmic_controls[0],
+		ARRAY_SIZE(twl4030_dapm_analogrmic_controls)),
 
 	SND_SOC_DAPM_PGA("ADC Physical Left",
 		TWL4030_REG_AVADC_CTL, 3, 0, NULL, 0),
@@ -1073,62 +1308,86 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 };
 
 static const struct snd_soc_dapm_route intercon[] = {
-	{"Analog L1 Playback Mixer", NULL, "DAC Left1"},
-	{"Analog R1 Playback Mixer", NULL, "DAC Right1"},
-	{"Analog L2 Playback Mixer", NULL, "DAC Left2"},
-	{"Analog R2 Playback Mixer", NULL, "DAC Right2"},
-
-	{"ARXL1_APGA", NULL, "Analog L1 Playback Mixer"},
-	{"ARXR1_APGA", NULL, "Analog R1 Playback Mixer"},
-	{"ARXL2_APGA", NULL, "Analog L2 Playback Mixer"},
-	{"ARXR2_APGA", NULL, "Analog R2 Playback Mixer"},
+	{"Digital L1 Playback Mixer", NULL, "DAC Left1"},
+	{"Digital R1 Playback Mixer", NULL, "DAC Right1"},
+	{"Digital L2 Playback Mixer", NULL, "DAC Left2"},
+	{"Digital R2 Playback Mixer", NULL, "DAC Right2"},
+	{"Digital Voice Playback Mixer", NULL, "DAC Voice"},
+
+	{"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"},
+	{"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"},
+	{"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"},
+	{"Analog R2 Playback Mixer", NULL, "Digital R2 Playback Mixer"},
+	{"Analog Voice Playback Mixer", NULL, "Digital Voice Playback Mixer"},
 
 	/* Internal playback routings */
 	/* Earpiece */
-	{"Earpiece Mux", "DACL1", "ARXL1_APGA"},
-	{"Earpiece Mux", "DACL2", "ARXL2_APGA"},
-	{"Earpiece Mux", "DACR1", "ARXR1_APGA"},
+	{"Earpiece Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"Earpiece Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"Earpiece Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"Earpiece Mixer", "AudioR1", "Analog R1 Playback Mixer"},
 	/* PreDrivL */
-	{"PredriveL Mux", "DACL1", "ARXL1_APGA"},
-	{"PredriveL Mux", "DACL2", "ARXL2_APGA"},
-	{"PredriveL Mux", "DACR2", "ARXR2_APGA"},
+	{"PredriveL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"PredriveL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"PredriveL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"PredriveL Mixer", "AudioR2", "Analog R2 Playback Mixer"},
 	/* PreDrivR */
-	{"PredriveR Mux", "DACR1", "ARXR1_APGA"},
-	{"PredriveR Mux", "DACR2", "ARXR2_APGA"},
-	{"PredriveR Mux", "DACL2", "ARXL2_APGA"},
+	{"PredriveR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"PredriveR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"PredriveR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+	{"PredriveR Mixer", "AudioL2", "Analog L2 Playback Mixer"},
 	/* HeadsetL */
-	{"HeadsetL Mux", "DACL1", "ARXL1_APGA"},
-	{"HeadsetL Mux", "DACL2", "ARXL2_APGA"},
+	{"HeadsetL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"HeadsetL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"HeadsetL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HeadsetL PGA", NULL, "HeadsetL Mixer"},
 	/* HeadsetR */
-	{"HeadsetR Mux", "DACR1", "ARXR1_APGA"},
-	{"HeadsetR Mux", "DACR2", "ARXR2_APGA"},
+	{"HeadsetR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"HeadsetR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"HeadsetR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HeadsetR PGA", NULL, "HeadsetR Mixer"},
 	/* CarkitL */
-	{"CarkitL Mux", "DACL1", "ARXL1_APGA"},
-	{"CarkitL Mux", "DACL2", "ARXL2_APGA"},
+	{"CarkitL Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"CarkitL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
+	{"CarkitL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
 	/* CarkitR */
-	{"CarkitR Mux", "DACR1", "ARXR1_APGA"},
-	{"CarkitR Mux", "DACR2", "ARXR2_APGA"},
+	{"CarkitR Mixer", "Voice", "Analog Voice Playback Mixer"},
+	{"CarkitR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+	{"CarkitR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
 	/* HandsfreeL */
-	{"HandsfreeL Mux", "DACL1", "ARXL1_APGA"},
-	{"HandsfreeL Mux", "DACL2", "ARXL2_APGA"},
-	{"HandsfreeL Mux", "DACR2", "ARXR2_APGA"},
+	{"HandsfreeL Mux", "Voice", "Analog Voice Playback Mixer"},
+	{"HandsfreeL Mux", "AudioL1", "Analog L1 Playback Mixer"},
+	{"HandsfreeL Mux", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HandsfreeL Mux", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HandsfreeL Switch", "Switch", "HandsfreeL Mux"},
+	{"HandsfreeL PGA", NULL, "HandsfreeL Switch"},
 	/* HandsfreeR */
-	{"HandsfreeR Mux", "DACR1", "ARXR1_APGA"},
-	{"HandsfreeR Mux", "DACR2", "ARXR2_APGA"},
-	{"HandsfreeR Mux", "DACL2", "ARXL2_APGA"},
+	{"HandsfreeR Mux", "Voice", "Analog Voice Playback Mixer"},
+	{"HandsfreeR Mux", "AudioR1", "Analog R1 Playback Mixer"},
+	{"HandsfreeR Mux", "AudioR2", "Analog R2 Playback Mixer"},
+	{"HandsfreeR Mux", "AudioL2", "Analog L2 Playback Mixer"},
+	{"HandsfreeR Switch", "Switch", "HandsfreeR Mux"},
+	{"HandsfreeR PGA", NULL, "HandsfreeR Switch"},
+	/* Vibra */
+	{"Vibra Mux", "AudioL1", "DAC Left1"},
+	{"Vibra Mux", "AudioR1", "DAC Right1"},
+	{"Vibra Mux", "AudioL2", "DAC Left2"},
+	{"Vibra Mux", "AudioR2", "DAC Right2"},
 
 	/* outputs */
-	{"OUTL", NULL, "ARXL2_APGA"},
-	{"OUTR", NULL, "ARXR2_APGA"},
-	{"EARPIECE", NULL, "Earpiece Mux"},
-	{"PREDRIVEL", NULL, "PredriveL Mux"},
-	{"PREDRIVER", NULL, "PredriveR Mux"},
-	{"HSOL", NULL, "HeadsetL Mux"},
-	{"HSOR", NULL, "HeadsetR Mux"},
-	{"CARKITL", NULL, "CarkitL Mux"},
-	{"CARKITR", NULL, "CarkitR Mux"},
-	{"HFL", NULL, "HandsfreeL Mux"},
-	{"HFR", NULL, "HandsfreeR Mux"},
+	{"OUTL", NULL, "Analog L2 Playback Mixer"},
+	{"OUTR", NULL, "Analog R2 Playback Mixer"},
+	{"EARPIECE", NULL, "Earpiece Mixer"},
+	{"PREDRIVEL", NULL, "PredriveL Mixer"},
+	{"PREDRIVER", NULL, "PredriveR Mixer"},
+	{"HSOL", NULL, "HeadsetL PGA"},
+	{"HSOR", NULL, "HeadsetR PGA"},
+	{"CARKITL", NULL, "CarkitL Mixer"},
+	{"CARKITR", NULL, "CarkitR Mixer"},
+	{"HFL", NULL, "HandsfreeL PGA"},
+	{"HFR", NULL, "HandsfreeR PGA"},
+	{"Vibra Route", "Audio", "Vibra Mux"},
+	{"VIBRA", NULL, "Vibra Route"},
 
 	/* Capture path */
 	{"Analog Left Capture Route", "Main mic", "MAINMIC"},
@@ -1168,18 +1427,22 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"},
 	{"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"},
 	{"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"},
+	{"Voice Analog Loopback", "Switch", "Analog Left Capture Route"},
 
 	{"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"},
 	{"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"},
 	{"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"},
 	{"Analog L2 Playback Mixer", NULL, "Left2 Analog Loopback"},
+	{"Analog Voice Playback Mixer", NULL, "Voice Analog Loopback"},
 
 	/* Digital bypass routes */
 	{"Right Digital Loopback", "Volume", "TX1 Capture Route"},
 	{"Left Digital Loopback", "Volume", "TX1 Capture Route"},
+	{"Voice Digital Loopback", "Volume", "TX2 Capture Route"},
 
-	{"Analog R2 Playback Mixer", NULL, "Right Digital Loopback"},
-	{"Analog L2 Playback Mixer", NULL, "Left Digital Loopback"},
+	{"Digital R2 Playback Mixer", NULL, "Right Digital Loopback"},
+	{"Digital L2 Playback Mixer", NULL, "Left Digital Loopback"},
+	{"Digital Voice Playback Mixer", NULL, "Voice Digital Loopback"},
 
 };
 
@@ -1226,6 +1489,58 @@ static int twl4030_set_bias_level(struct snd_soc_codec *codec,
 	return 0;
 }
 
+static void twl4030_constraints(struct twl4030_priv *twl4030,
+				struct snd_pcm_substream *mst_substream)
+{
+	struct snd_pcm_substream *slv_substream;
+
+	/* Pick the stream, which need to be constrained */
+	if (mst_substream == twl4030->master_substream)
+		slv_substream = twl4030->slave_substream;
+	else if (mst_substream == twl4030->slave_substream)
+		slv_substream = twl4030->master_substream;
+	else /* This should not happen.. */
+		return;
+
+	/* Set the constraints according to the already configured stream */
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_RATE,
+				twl4030->rate,
+				twl4030->rate);
+
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+				twl4030->sample_bits,
+				twl4030->sample_bits);
+
+	snd_pcm_hw_constraint_minmax(slv_substream->runtime,
+				SNDRV_PCM_HW_PARAM_CHANNELS,
+				twl4030->channels,
+				twl4030->channels);
+}
+
+/* In case of 4 channel mode, the RX1 L/R for playback and the TX2 L/R for
+ * capture has to be enabled/disabled. */
+static void twl4030_tdm_enable(struct snd_soc_codec *codec, int direction,
+				int enable)
+{
+	u8 reg, mask;
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = TWL4030_ARXL1_VRX_EN | TWL4030_ARXR1_EN;
+	else
+		mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
+
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	twl4030_write(codec, TWL4030_REG_OPTION, reg);
+}
+
 static int twl4030_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
@@ -1234,26 +1549,25 @@ static int twl4030_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct twl4030_priv *twl4030 = codec->private_data;
 
-	/* If we already have a playback or capture going then constrain
-	 * this substream to match it.
-	 */
 	if (twl4030->master_substream) {
-		struct snd_pcm_runtime *master_runtime;
-		master_runtime = twl4030->master_substream->runtime;
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
-					     master_runtime->sample_bits,
-					     master_runtime->sample_bits);
-
 		twl4030->slave_substream = substream;
-	} else
+		/* The DAI has one configuration for playback and capture, so
+		 * if the DAI has been already configured then constrain this
+		 * substream to match it. */
+		if (twl4030->configured)
+			twl4030_constraints(twl4030, twl4030->master_substream);
+	} else {
+		if (!(twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) &
+			TWL4030_OPTION_1)) {
+			/* In option2 4 channel is not supported, set the
+			 * constraint for the first stream for channels, the
+			 * second stream will 'inherit' this cosntraint */
+			snd_pcm_hw_constraint_minmax(substream->runtime,
+						SNDRV_PCM_HW_PARAM_CHANNELS,
+						2, 2);
+		}
 		twl4030->master_substream = substream;
+	}
 
 	return 0;
 }
@@ -1270,6 +1584,17 @@ static void twl4030_shutdown(struct snd_pcm_substream *substream,
 		twl4030->master_substream = twl4030->slave_substream;
 
 	twl4030->slave_substream = NULL;
+
+	/* If all streams are closed, or the remaining stream has not yet
+	 * been configured than set the DAI as not configured. */
+	if (!twl4030->master_substream)
+		twl4030->configured = 0;
+	 else if (!twl4030->master_substream->runtime->channels)
+		twl4030->configured = 0;
+
+	 /* If the closing substream had 4 channel, do the necessary cleanup */
+	if (substream->runtime->channels == 4)
+		twl4030_tdm_enable(codec, substream->stream, 0);
 }
 
 static int twl4030_hw_params(struct snd_pcm_substream *substream,
@@ -1282,8 +1607,24 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
 	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 mode, old_mode, format, old_format;
 
-	if (substream == twl4030->slave_substream)
-		/* Ignoring hw_params for slave substream */
+	 /* If the substream has 4 channel, do the necessary setup */
+	if (params_channels(params) == 4) {
+		u8 format, mode;
+
+		format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+		mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
+
+		/* Safety check: are we in the correct operating mode and
+		 * the interface is in TDM mode? */
+		if ((mode & TWL4030_OPTION_1) &&
+		    ((format & TWL4030_AIF_FORMAT) == TWL4030_AIF_FORMAT_TDM))
+			twl4030_tdm_enable(codec, substream->stream, 1);
+		else
+			return -EINVAL;
+	}
+
+	if (twl4030->configured)
+		/* Ignoring hw_params for already configured DAI */
 		return 0;
 
 	/* bit rate */
@@ -1363,6 +1704,21 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
 		/* set CODECPDZ afterwards */
 		twl4030_codec_enable(codec, 1);
 	}
+
+	/* Store the important parameters for the DAI configuration and set
+	 * the DAI as configured */
+	twl4030->configured = 1;
+	twl4030->rate = params_rate(params);
+	twl4030->sample_bits = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_SAMPLE_BITS)->min;
+	twl4030->channels = params_channels(params);
+
+	/* If both playback and capture streams are open, and one of them
+	 * is setting the hw parameters right now (since we are here), set
+	 * constraints to the other stream to match the current one. */
+	if (twl4030->slave_substream)
+		twl4030_constraints(twl4030, substream);
+
 	return 0;
 }
 
@@ -1370,17 +1726,21 @@ static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 infreq;
 
 	switch (freq) {
 	case 19200000:
 		infreq = TWL4030_APLL_INFREQ_19200KHZ;
+		twl4030->sysclk = 19200;
 		break;
 	case 26000000:
 		infreq = TWL4030_APLL_INFREQ_26000KHZ;
+		twl4030->sysclk = 26000;
 		break;
 	case 38400000:
 		infreq = TWL4030_APLL_INFREQ_38400KHZ;
+		twl4030->sysclk = 38400;
 		break;
 	default:
 		printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
@@ -1424,6 +1784,9 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_I2S:
 		format |= TWL4030_AIF_FORMAT_CODEC;
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		format |= TWL4030_AIF_FORMAT_TDM;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1443,6 +1806,180 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	return 0;
 }
 
+/* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R
+ * (VTXL, VTXR) for uplink has to be enabled/disabled. */
+static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction,
+				int enable)
+{
+	u8 reg, mask;
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = TWL4030_ARXL1_VRX_EN;
+	else
+		mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
+
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	twl4030_write(codec, TWL4030_REG_OPTION, reg);
+}
+
+static int twl4030_voice_startup(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u8 infreq;
+	u8 mode;
+
+	/* If the system master clock is not 26MHz, the voice PCM interface is
+	 * not avilable.
+	 */
+	infreq = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL)
+		& TWL4030_APLL_INFREQ;
+
+	if (infreq != TWL4030_APLL_INFREQ_26000KHZ) {
+		printk(KERN_ERR "TWL4030 voice startup: "
+			"MCLK is not 26MHz, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	/* If the codec mode is not option2, the voice PCM interface is not
+	 * avilable.
+	 */
+	mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
+		& TWL4030_OPT_MODE;
+
+	if (mode != TWL4030_OPTION_2) {
+		printk(KERN_ERR "TWL4030 voice startup: "
+			"the codec mode is not option2\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void twl4030_voice_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	/* Enable voice digital filters */
+	twl4030_voice_enable(codec, substream->stream, 0);
+}
+
+static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u8 old_mode, mode;
+
+	/* Enable voice digital filters */
+	twl4030_voice_enable(codec, substream->stream, 1);
+
+	/* bit rate */
+	old_mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
+		& ~(TWL4030_CODECPDZ);
+	mode = old_mode;
+
+	switch (params_rate(params)) {
+	case 8000:
+		mode &= ~(TWL4030_SEL_16K);
+		break;
+	case 16000:
+		mode |= TWL4030_SEL_16K;
+		break;
+	default:
+		printk(KERN_ERR "TWL4030 voice hw params: unknown rate %d\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	if (mode != old_mode) {
+		/* change rate and set CODECPDZ */
+		twl4030_codec_enable(codec, 0);
+		twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+		twl4030_codec_enable(codec, 1);
+	}
+
+	return 0;
+}
+
+static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 infreq;
+
+	switch (freq) {
+	case 26000000:
+		infreq = TWL4030_APLL_INFREQ_26000KHZ;
+		break;
+	default:
+		printk(KERN_ERR "TWL4030 voice set sysclk: unknown rate %d\n",
+			freq);
+		return -EINVAL;
+	}
+
+	infreq |= TWL4030_APLL_EN;
+	twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
+
+	return 0;
+}
+
+static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 old_format, format;
+
+	/* get format */
+	old_format = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF);
+	format = old_format;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFM:
+		format &= ~(TWL4030_VIF_SLAVE_EN);
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		format |= TWL4030_VIF_SLAVE_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_NF:
+		format &= ~(TWL4030_VIF_FORMAT);
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		format |= TWL4030_VIF_FORMAT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (format != old_format) {
+		/* change format and set CODECPDZ */
+		twl4030_codec_enable(codec, 0);
+		twl4030_write(codec, TWL4030_REG_VOICE_IF, format);
+		twl4030_codec_enable(codec, 1);
+	}
+
+	return 0;
+}
+
 #define TWL4030_RATES	 (SNDRV_PCM_RATE_8000_48000)
 #define TWL4030_FORMATS	 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
 
@@ -1454,21 +1991,47 @@ static struct snd_soc_dai_ops twl4030_dai_ops = {
 	.set_fmt	= twl4030_set_dai_fmt,
 };
 
-struct snd_soc_dai twl4030_dai = {
+static struct snd_soc_dai_ops twl4030_dai_voice_ops = {
+	.startup	= twl4030_voice_startup,
+	.shutdown	= twl4030_voice_shutdown,
+	.hw_params	= twl4030_voice_hw_params,
+	.set_sysclk	= twl4030_voice_set_dai_sysclk,
+	.set_fmt	= twl4030_voice_set_dai_fmt,
+};
+
+struct snd_soc_dai twl4030_dai[] = {
+{
 	.name = "twl4030",
 	.playback = {
-		.stream_name = "Playback",
+		.stream_name = "HiFi Playback",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 4,
 		.rates = TWL4030_RATES | SNDRV_PCM_RATE_96000,
 		.formats = TWL4030_FORMATS,},
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 4,
 		.rates = TWL4030_RATES,
 		.formats = TWL4030_FORMATS,},
 	.ops = &twl4030_dai_ops,
+},
+{
+	.name = "twl4030 Voice",
+	.playback = {
+		.stream_name = "Voice Playback",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &twl4030_dai_voice_ops,
+},
 };
 EXPORT_SYMBOL_GPL(twl4030_dai);
 
@@ -1500,6 +2063,8 @@ static int twl4030_resume(struct platform_device *pdev)
 static int twl4030_init(struct snd_soc_device *socdev)
 {
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct twl4030_setup_data *setup = socdev->codec_data;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	int ret = 0;
 
 	printk(KERN_INFO "TWL4030 Audio Codec init \n");
@@ -1509,14 +2074,31 @@ static int twl4030_init(struct snd_soc_device *socdev)
 	codec->read = twl4030_read_reg_cache;
 	codec->write = twl4030_write;
 	codec->set_bias_level = twl4030_set_bias_level;
-	codec->dai = &twl4030_dai;
-	codec->num_dai = 1;
+	codec->dai = twl4030_dai;
+	codec->num_dai = ARRAY_SIZE(twl4030_dai),
 	codec->reg_cache_size = sizeof(twl4030_reg);
 	codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
 					GFP_KERNEL);
 	if (codec->reg_cache == NULL)
 		return -ENOMEM;
 
+	/* Configuration for headset ramp delay from setup data */
+	if (setup) {
+		unsigned char hs_pop;
+
+		if (setup->sysclk)
+			twl4030->sysclk = setup->sysclk;
+		else
+			twl4030->sysclk = 26000;
+
+		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+		hs_pop &= ~TWL4030_RAMP_DELAY;
+		hs_pop |= (setup->ramp_delay_value << 2);
+		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	} else {
+		twl4030->sysclk = 26000;
+	}
+
 	/* register pcms */
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
 	if (ret < 0) {
@@ -1604,13 +2186,13 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
 
 static int __init twl4030_modinit(void)
 {
-	return snd_soc_register_dai(&twl4030_dai);
+	return snd_soc_register_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
 }
 module_init(twl4030_modinit);
 
 static void __exit twl4030_exit(void)
 {
-	snd_soc_unregister_dai(&twl4030_dai);
+	snd_soc_unregister_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
 }
 module_exit(twl4030_exit);
 
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index cb63765db1d..fe5f395d9e4 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -92,8 +92,9 @@
 #define TWL4030_REG_VIBRA_PWM_SET	0x47
 #define TWL4030_REG_ANAMIC_GAIN		0x48
 #define TWL4030_REG_MISC_SET_2		0x49
+#define TWL4030_REG_SW_SHADOW		0x4A
 
-#define TWL4030_CACHEREGNUM	(TWL4030_REG_MISC_SET_2 + 1)
+#define TWL4030_CACHEREGNUM	(TWL4030_REG_SW_SHADOW + 1)
 
 /* Bitfield Definitions */
 
@@ -110,9 +111,22 @@
 #define TWL4030_APLL_RATE_44100		0x90
 #define TWL4030_APLL_RATE_48000		0xA0
 #define TWL4030_APLL_RATE_96000		0xE0
-#define TWL4030_SEL_16K			0x04
+#define TWL4030_SEL_16K			0x08
 #define TWL4030_CODECPDZ		0x02
 #define TWL4030_OPT_MODE		0x01
+#define TWL4030_OPTION_1		(1 << 0)
+#define TWL4030_OPTION_2		(0 << 0)
+
+/* TWL4030_OPTION (0x02) Fields */
+
+#define TWL4030_ATXL1_EN		(1 << 0)
+#define TWL4030_ATXR1_EN		(1 << 1)
+#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
+#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
+#define TWL4030_ARXL1_VRX_EN		(1 << 4)
+#define TWL4030_ARXR1_EN		(1 << 5)
+#define TWL4030_ARXL2_EN		(1 << 6)
+#define TWL4030_ARXR2_EN		(1 << 7)
 
 /* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
 
@@ -171,6 +185,17 @@
 #define TWL4030_CLK256FS_EN		0x02
 #define TWL4030_AIF_EN			0x01
 
+/* VOICE_IF (0x0F) Fields */
+
+#define TWL4030_VIF_SLAVE_EN		0x80
+#define TWL4030_VIF_DIN_EN		0x40
+#define TWL4030_VIF_DOUT_EN		0x20
+#define TWL4030_VIF_SWAP		0x10
+#define TWL4030_VIF_FORMAT		0x08
+#define TWL4030_VIF_TRI_EN		0x04
+#define TWL4030_VIF_SUB_EN		0x02
+#define TWL4030_VIF_EN			0x01
+
 /* EAR_CTL (0x21) */
 #define TWL4030_EAR_GAIN		0x30
 
@@ -236,7 +261,19 @@
 #define TWL4030_SMOOTH_ANAVOL_EN	0x02
 #define TWL4030_DIGMIC_LR_SWAP_EN	0x01
 
-extern struct snd_soc_dai twl4030_dai;
+/* TWL4030_REG_SW_SHADOW (0x4A) Fields */
+#define TWL4030_HFL_EN			0x01
+#define TWL4030_HFR_EN			0x02
+
+#define TWL4030_DAI_HIFI		0
+#define TWL4030_DAI_VOICE		1
+
+extern struct snd_soc_dai twl4030_dai[2];
 extern struct snd_soc_codec_device soc_codec_dev_twl4030;
 
+struct twl4030_setup_data {
+	unsigned int ramp_delay_value;
+	unsigned int sysclk;
+};
+
 #endif	/* End of __TWL4030_AUDIO_H__ */
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index ddefb8f8014..269b108e1de 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -101,7 +101,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg,
 	pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value);
 
 	if (reg >= UDA134X_REGS_NUM) {
-		printk(KERN_ERR "%s unkown register: reg: %d",
+		printk(KERN_ERR "%s unkown register: reg: %u",
 		       __func__, reg);
 		return -EINVAL;
 	}
@@ -296,7 +296,7 @@ static int uda134x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct uda134x_priv *uda134x = codec->private_data;
 
-	pr_debug("%s clk_id: %d, freq: %d, dir: %d\n", __func__,
+	pr_debug("%s clk_id: %d, freq: %u, dir: %d\n", __func__,
 		 clk_id, freq, dir);
 
 	/* Anything between 256fs*8Khz and 512fs*48Khz should be acceptable
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 0275321ff8a..e7348d341b7 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1108,7 +1108,7 @@ static int wm8350_set_fll(struct snd_soc_dai *codec_dai,
 	if (ret < 0)
 		return ret;
 	dev_dbg(wm8350->dev,
-		"FLL in %d FLL out %d N 0x%x K 0x%x div %d ratio %d",
+		"FLL in %u FLL out %u N 0x%x K 0x%x div %d ratio %d",
 		freq_in, freq_out, fll_div.n, fll_div.k, fll_div.div,
 		fll_div.ratio);
 
diff --git a/sound/soc/codecs/wm8350.h b/sound/soc/codecs/wm8350.h
index d11bd9288cf..d088eb4b88b 100644
--- a/sound/soc/codecs/wm8350.h
+++ b/sound/soc/codecs/wm8350.h
@@ -13,6 +13,7 @@
 #define _WM8350_H
 
 #include <sound/soc.h>
+#include <linux/mfd/wm8350/audio.h>
 
 extern struct snd_soc_dai wm8350_dai;
 extern struct snd_soc_codec_device soc_codec_dev_wm8350;
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index 510efa60400..502eefac1ec 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -954,7 +954,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors,
 		factors->outdiv *= 2;
 		if (factors->outdiv > 32) {
 			dev_err(wm8400->wm8400->dev,
-				"Unsupported FLL output frequency %dHz\n",
+				"Unsupported FLL output frequency %uHz\n",
 				Fout);
 			return -EINVAL;
 		}
@@ -1003,7 +1003,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors,
 	factors->k = K / 10;
 
 	dev_dbg(wm8400->wm8400->dev,
-		"FLL: Fref=%d Fout=%d N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
+		"FLL: Fref=%u Fout=%u N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
 		Fref, Fout,
 		factors->n, factors->k, factors->fratio, factors->outdiv);
 
@@ -1473,8 +1473,8 @@ static int wm8400_codec_probe(struct platform_device *dev)
 
 	codec = &priv->codec;
 	codec->private_data = priv;
-	codec->control_data = dev->dev.driver_data;
-	priv->wm8400 = dev->dev.driver_data;
+	codec->control_data = dev_get_drvdata(&dev->dev);
+	priv->wm8400 = dev_get_drvdata(&dev->dev);
 
 	ret = regulator_bulk_get(priv->wm8400->dev,
 				 ARRAY_SIZE(power), &power[0]);
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 6a4cea09c45..c8b8dba8589 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -298,7 +298,7 @@ static void pll_factors(unsigned int target, unsigned int source)
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"WM8510 N value %d outwith recommended range!d\n",
+			"WM8510 N value %u outwith recommended range!d\n",
 			Ndiv);
 
 	pll_div.n = Ndiv;
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 9f6be3d31ac..86c4b24db81 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -415,7 +415,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target,
 	unsigned int K, Ndiv, Nmod;
 	int i;
 
-	pr_debug("wm8580: PLL %dHz->%dHz\n", source, target);
+	pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
 
 	/* Scale the output frequency up; the PLL should run in the
 	 * region of 90-100MHz.
@@ -447,7 +447,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target,
 
 	if ((Ndiv < 5) || (Ndiv > 13)) {
 		printk(KERN_ERR
-			"WM8580 N=%d outside supported range\n", Ndiv);
+			"WM8580 N=%u outside supported range\n", Ndiv);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index e043e3f6000..7a205876ef4 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -666,14 +666,14 @@ static int __devinit wm8731_spi_probe(struct spi_device *spi)
 	codec->hw_write = (hw_write_t)wm8731_spi_write;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8731;
+	dev_set_drvdata(&spi->dev, wm8731);
 
 	return wm8731_register(wm8731);
 }
 
 static int __devexit wm8731_spi_remove(struct spi_device *spi)
 {
-	struct wm8731_priv *wm8731 = spi->dev.driver_data;
+	struct wm8731_priv *wm8731 = dev_get_drvdata(&spi->dev);
 
 	wm8731_unregister(wm8731);
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index a6e8f3f7f05..d28eeaceb85 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -703,7 +703,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target,
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"wm8753: unsupported N = %d\n", Ndiv);
+			"wm8753: unsupported N = %u\n", Ndiv);
 
 	pll_div->n = Ndiv;
 	Nmod = target % source;
@@ -1822,14 +1822,14 @@ static int __devinit wm8753_spi_probe(struct spi_device *spi)
 	codec->hw_write = (hw_write_t)wm8753_spi_write;
 	codec->dev = &spi->dev;
 
-	spi->dev.driver_data = wm8753;
+	dev_set_drvdata(&spi->dev, wm8753);
 
 	return wm8753_register(wm8753);
 }
 
 static int __devexit wm8753_spi_remove(struct spi_device *spi)
 {
-	struct wm8753_priv *wm8753 = spi->dev.driver_data;
+	struct wm8753_priv *wm8753 = dev_get_drvdata(&spi->dev);
 	wm8753_unregister(wm8753);
 	return 0;
 }
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 46c5ea1ff92..3c78945244b 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -778,11 +778,11 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 	}
 
 	if (target > 100000000)
-		printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d"
-		       " Fout=%d\n", target, Fref, Fout);
+		printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u"
+		       " Fout=%u\n", target, Fref, Fout);
 	if (div > 32) {
 		printk(KERN_ERR "wm8900: Invalid FLL division rate %u, "
-		       "Fref=%d, Fout=%d, target=%d\n",
+		       "Fref=%u, Fout=%u, target=%u\n",
 		       div, Fref, Fout, target);
 		return -EINVAL;
 	}
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 8cf571f1a80..d8a9222fbf7 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -217,7 +217,6 @@ struct wm8903_priv {
 	int sysclk;
 
 	/* Reference counts */
-	int charge_pump_users;
 	int class_w_users;
 	int playback_active;
 	int capture_active;
@@ -373,6 +372,15 @@ static void wm8903_reset(struct snd_soc_codec *codec)
 #define WM8903_OUTPUT_INT   0x2
 #define WM8903_OUTPUT_IN    0x1
 
+static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
+			   struct snd_kcontrol *kcontrol, int event)
+{
+	WARN_ON(event != SND_SOC_DAPM_POST_PMU);
+	mdelay(4);
+
+	return 0;
+}
+
 /*
  * Event for headphone and line out amplifier power changes.  Special
  * power up/down sequences are required in order to maximise pop/click
@@ -382,19 +390,20 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 			       struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
-	struct wm8903_priv *wm8903 = codec->private_data;
-	struct i2c_client *i2c = codec->control_data;
 	u16 val;
 	u16 reg;
+	u16 dcs_reg;
+	u16 dcs_bit;
 	int shift;
-	u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0);
 
 	switch (w->reg) {
 	case WM8903_POWER_MANAGEMENT_2:
 		reg = WM8903_ANALOGUE_HP_0;
+		dcs_bit = 0 + w->shift;
 		break;
 	case WM8903_POWER_MANAGEMENT_3:
 		reg = WM8903_ANALOGUE_LINEOUT_0;
+		dcs_bit = 2 + w->shift;
 		break;
 	default:
 		BUG();
@@ -419,18 +428,6 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 		/* Short the output */
 		val &= ~(WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
-
-		wm8903->charge_pump_users++;
-
-		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
-			wm8903->charge_pump_users);
-
-		if (wm8903->charge_pump_users == 1) {
-			dev_dbg(&i2c->dev, "Enabling charge pump\n");
-			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
-				     cp_reg | WM8903_CP_ENA);
-			mdelay(4);
-		}
 	}
 
 	if (event & SND_SOC_DAPM_POST_PMU) {
@@ -446,6 +443,11 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 		val |= (WM8903_OUTPUT_OUT << shift);
 		wm8903_write(codec, reg, val);
 
+		/* Enable the DC servo */
+		dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+		dcs_reg |= dcs_bit;
+		wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+
 		/* Remove the short */
 		val |= (WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
@@ -458,25 +460,17 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w,
 		val &= ~(WM8903_OUTPUT_SHORT << shift);
 		wm8903_write(codec, reg, val);
 
+		/* Disable the DC servo */
+		dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+		dcs_reg &= ~dcs_bit;
+		wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+
 		/* Then disable the intermediate and output stages */
 		val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
 			  WM8903_OUTPUT_IN) << shift);
 		wm8903_write(codec, reg, val);
 	}
 
-	if (event & SND_SOC_DAPM_POST_PMD) {
-		wm8903->charge_pump_users--;
-
-		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
-			wm8903->charge_pump_users);
-
-		if (wm8903->charge_pump_users == 0) {
-			dev_dbg(&i2c->dev, "Disabling charge pump\n");
-			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
-				     cp_reg & ~WM8903_CP_ENA);
-		}
-	}
-
 	return 0;
 }
 
@@ -539,6 +533,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
 /* ALSA can only do steps of .01dB */
 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 
+static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 
 static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
@@ -657,6 +652,16 @@ static const struct soc_enum rinput_inv_enum =
 	SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text);
 
 
+static const char *sidetone_text[] = {
+	"None", "Left", "Right"
+};
+
+static const struct soc_enum lsidetone_enum =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text);
+
+static const struct soc_enum rsidetone_enum =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text);
+
 static const struct snd_kcontrol_new wm8903_snd_controls[] = {
 
 /* Input PGAs - No TLV since the scale depends on PGA mode */
@@ -700,6 +705,9 @@ SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
 SOC_ENUM("ADC Companding Mode", adc_companding),
 SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
 
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
+	       12, 0, digital_sidetone_tlv),
+
 /* DAC */
 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
 		 WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
@@ -762,6 +770,12 @@ static const struct snd_kcontrol_new rinput_mux =
 static const struct snd_kcontrol_new rinput_inv_mux =
 	SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
 
+static const struct snd_kcontrol_new lsidetone_mux =
+	SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
+
+static const struct snd_kcontrol_new rsidetone_mux =
+	SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
+
 static const struct snd_kcontrol_new left_output_mixer[] = {
 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
@@ -828,6 +842,9 @@ SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
 SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0),
 SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0),
 
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
+
 SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0),
 SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0),
 
@@ -844,26 +861,29 @@ SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
 SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
 		   1, 0, NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
 		   0, 0, NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
 		   NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
 		   NULL, 0, wm8903_output_event,
 		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+		   SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
 		 NULL, 0),
 SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
 		 NULL, 0),
 
+SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
+		    wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_route intercon[] = {
@@ -909,7 +929,19 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{ "Right Input PGA", NULL, "Right Input Mode Mux" },
 
 	{ "ADCL", NULL, "Left Input PGA" },
+	{ "ADCL", NULL, "CLK_DSP" },
 	{ "ADCR", NULL, "Right Input PGA" },
+	{ "ADCR", NULL, "CLK_DSP" },
+
+	{ "DACL Sidetone", "Left", "ADCL" },
+	{ "DACL Sidetone", "Right", "ADCR" },
+	{ "DACR Sidetone", "Left", "ADCL" },
+	{ "DACR Sidetone", "Right", "ADCR" },
+
+	{ "DACL", NULL, "DACL Sidetone" },
+	{ "DACL", NULL, "CLK_DSP" },
+	{ "DACR", NULL, "DACR Sidetone" },
+	{ "DACR", NULL, "CLK_DSP" },
 
 	{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
 	{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
@@ -951,6 +983,11 @@ static const struct snd_soc_dapm_route intercon[] = {
 
 	{ "ROP", NULL, "Right Speaker PGA" },
 	{ "RON", NULL, "Right Speaker PGA" },
+
+	{ "Left Headphone Output PGA", NULL, "Charge Pump" },
+	{ "Right Headphone Output PGA", NULL, "Charge Pump" },
+	{ "Left Line Output PGA", NULL, "Charge Pump" },
+	{ "Right Line Output PGA", NULL, "Charge Pump" },
 };
 
 static int wm8903_add_widgets(struct snd_soc_codec *codec)
@@ -985,6 +1022,11 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 			wm8903_write(codec, WM8903_CLOCK_RATES_2,
 				     WM8903_CLK_SYS_ENA);
 
+			/* Change DC servo dither level in startup sequence */
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
+			wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
+
 			wm8903_run_sequence(codec, 0);
 			wm8903_sync_reg_cache(codec, codec->reg_cache);
 
@@ -1277,14 +1319,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
 	if (wm8903->master_substream) {
 		master_runtime = wm8903->master_substream->runtime;
 
-		dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
-			master_runtime->sample_bits,
-			master_runtime->rate);
-
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-					     SNDRV_PCM_HW_PARAM_RATE,
-					     master_runtime->rate,
-					     master_runtime->rate);
+		dev_dbg(&i2c->dev, "Constraining to %d bits\n",
+			master_runtime->sample_bits);
 
 		snd_pcm_hw_constraint_minmax(substream->runtime,
 					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
@@ -1523,6 +1559,7 @@ struct snd_soc_dai wm8903_dai = {
 		 .formats = WM8903_FORMATS,
 	 },
 	.ops = &wm8903_dai_ops,
+	.symmetric_rates = 1,
 };
 EXPORT_SYMBOL_GPL(wm8903_dai);
 
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
new file mode 100644
index 00000000000..b8e17d6bc1f
--- /dev/null
+++ b/sound/soc/codecs/wm8940.c
@@ -0,0 +1,955 @@
+/*
+ * wm8940.c  --  WM8940 ALSA Soc Audio driver
+ *
+ * Author: Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * Based on wm8510.c
+ *    Copyright  2006 Wolfson Microelectronics PLC.
+ *    Author:  Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Not currently handled:
+ * Notch filter control
+ * AUXMode (inverting vs mixer)
+ * No means to obtain current gain if alc enabled.
+ * No use made of gpio
+ * Fast VMID discharge for power down
+ * Soft Start
+ * DLR and ALR Swaps not enabled
+ * Digital Sidetone not supported
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8940.h"
+
+struct wm8940_priv {
+	unsigned int sysclk;
+	u16 reg_cache[WM8940_CACHEREGNUM];
+	struct snd_soc_codec codec;
+};
+
+static u16 wm8940_reg_defaults[] = {
+	0x8940, /* Soft Reset */
+	0x0000, /* Power 1 */
+	0x0000, /* Power 2 */
+	0x0000, /* Power 3 */
+	0x0010, /* Interface Control */
+	0x0000, /* Companding Control */
+	0x0140, /* Clock Control */
+	0x0000, /* Additional Controls */
+	0x0000, /* GPIO Control */
+	0x0002, /* Auto Increment Control */
+	0x0000, /* DAC Control */
+	0x00FF, /* DAC Volume */
+	0,
+	0,
+	0x0100, /* ADC Control */
+	0x00FF, /* ADC Volume */
+	0x0000, /* Notch Filter 1 Control 1 */
+	0x0000, /* Notch Filter 1 Control 2 */
+	0x0000, /* Notch Filter 2 Control 1 */
+	0x0000, /* Notch Filter 2 Control 2 */
+	0x0000, /* Notch Filter 3 Control 1 */
+	0x0000, /* Notch Filter 3 Control 2 */
+	0x0000, /* Notch Filter 4 Control 1 */
+	0x0000, /* Notch Filter 4 Control 2 */
+	0x0032, /* DAC Limit Control 1 */
+	0x0000, /* DAC Limit Control 2 */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0x0038, /* ALC Control 1 */
+	0x000B, /* ALC Control 2 */
+	0x0032, /* ALC Control 3 */
+	0x0000, /* Noise Gate */
+	0x0041, /* PLLN */
+	0x000C, /* PLLK1 */
+	0x0093, /* PLLK2 */
+	0x00E9, /* PLLK3 */
+	0,
+	0,
+	0x0030, /* ALC Control 4 */
+	0,
+	0x0002, /* Input Control */
+	0x0050, /* PGA Gain */
+	0,
+	0x0002, /* ADC Boost Control */
+	0,
+	0x0002, /* Output Control */
+	0x0000, /* Speaker Mixer Control */
+	0,
+	0,
+	0,
+	0x0079, /* Speaker Volume */
+	0,
+	0x0000, /* Mono Mixer Control */
+};
+
+static inline unsigned int wm8940_read_reg_cache(struct snd_soc_codec *codec,
+						 unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
+		return -1;
+
+	return cache[reg];
+}
+
+static inline int wm8940_write_reg_cache(struct snd_soc_codec *codec,
+					  u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
+		return -1;
+
+	cache[reg] = value;
+
+	return 0;
+}
+
+static int wm8940_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	int ret;
+	u8 data[3] = { reg,
+		       (value & 0xff00) >> 8,
+		       (value & 0x00ff)
+	};
+
+	wm8940_write_reg_cache(codec, reg, value);
+
+	ret = codec->hw_write(codec->control_data, data, 3);
+
+	if (ret < 0)
+		return ret;
+	else if (ret != 3)
+		return -EIO;
+	return 0;
+}
+
+static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" };
+static const struct soc_enum wm8940_adc_companding_enum
+= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding);
+static const struct soc_enum wm8940_dac_companding_enum
+= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 3, 4, wm8940_companding);
+
+static const char *wm8940_alc_mode_text[] = {"ALC", "Limiter"};
+static const struct soc_enum wm8940_alc_mode_enum
+= SOC_ENUM_SINGLE(WM8940_ALC3, 8, 2, wm8940_alc_mode_text);
+
+static const char *wm8940_mic_bias_level_text[] = {"0.9", "0.65"};
+static const struct soc_enum wm8940_mic_bias_level_enum
+= SOC_ENUM_SINGLE(WM8940_INPUTCTL, 8, 2, wm8940_mic_bias_level_text);
+
+static const char *wm8940_filter_mode_text[] = {"Audio", "Application"};
+static const struct soc_enum wm8940_filter_mode_enum
+= SOC_ENUM_SINGLE(WM8940_ADC, 7, 2, wm8940_filter_mode_text);
+
+static DECLARE_TLV_DB_SCALE(wm8940_spk_vol_tlv, -5700, 100, 1);
+static DECLARE_TLV_DB_SCALE(wm8940_att_tlv, -1000, 1000, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_pga_vol_tlv, -1200, 75, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_min_tlv, -1200, 600, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_max_tlv, 675, 600, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_alc_tar_tlv, -2250, 50, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_lim_boost_tlv, 0, 100, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_lim_thresh_tlv, -600, 100, 0);
+static DECLARE_TLV_DB_SCALE(wm8940_adc_tlv, -12750, 50, 1);
+static DECLARE_TLV_DB_SCALE(wm8940_capture_boost_vol_tlv, 0, 2000, 0);
+
+static const struct snd_kcontrol_new wm8940_snd_controls[] = {
+	SOC_SINGLE("Digital Loopback Switch", WM8940_COMPANDINGCTL,
+		   6, 1, 0),
+	SOC_ENUM("DAC Companding", wm8940_dac_companding_enum),
+	SOC_ENUM("ADC Companding", wm8940_adc_companding_enum),
+
+	SOC_ENUM("ALC Mode", wm8940_alc_mode_enum),
+	SOC_SINGLE("ALC Switch", WM8940_ALC1, 8, 1, 0),
+	SOC_SINGLE_TLV("ALC Capture Max Gain", WM8940_ALC1,
+		       3, 7, 1, wm8940_alc_max_tlv),
+	SOC_SINGLE_TLV("ALC Capture Min Gain", WM8940_ALC1,
+		       0, 7, 0, wm8940_alc_min_tlv),
+	SOC_SINGLE_TLV("ALC Capture Target", WM8940_ALC2,
+		       0, 14, 0, wm8940_alc_tar_tlv),
+	SOC_SINGLE("ALC Capture Hold", WM8940_ALC2, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Decay", WM8940_ALC3, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Attach", WM8940_ALC3, 0, 10, 0),
+	SOC_SINGLE("ALC ZC Switch", WM8940_ALC4, 1, 1, 0),
+	SOC_SINGLE("ALC Capture Noise Gate Switch", WM8940_NOISEGATE,
+		   3, 1, 0),
+	SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8940_NOISEGATE,
+		   0, 7, 0),
+
+	SOC_SINGLE("DAC Playback Limiter Switch", WM8940_DACLIM1, 8, 1, 0),
+	SOC_SINGLE("DAC Playback Limiter Attack", WM8940_DACLIM1, 0, 9, 0),
+	SOC_SINGLE("DAC Playback Limiter Decay", WM8940_DACLIM1, 4, 11, 0),
+	SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8940_DACLIM2,
+		       4, 9, 1, wm8940_lim_thresh_tlv),
+	SOC_SINGLE_TLV("DAC Playback Limiter Boost", WM8940_DACLIM2,
+		       0, 12, 0, wm8940_lim_boost_tlv),
+
+	SOC_SINGLE("Capture PGA ZC Switch", WM8940_PGAGAIN, 7, 1, 0),
+	SOC_SINGLE_TLV("Capture PGA Volume", WM8940_PGAGAIN,
+		       0, 63, 0, wm8940_pga_vol_tlv),
+	SOC_SINGLE_TLV("Digital Playback Volume", WM8940_DACVOL,
+		       0, 255, 0, wm8940_adc_tlv),
+	SOC_SINGLE_TLV("Digital Capture Volume", WM8940_ADCVOL,
+		       0, 255, 0, wm8940_adc_tlv),
+	SOC_ENUM("Mic Bias Level", wm8940_mic_bias_level_enum),
+	SOC_SINGLE_TLV("Capture Boost Volue", WM8940_ADCBOOST,
+		       8, 1, 0, wm8940_capture_boost_vol_tlv),
+	SOC_SINGLE_TLV("Speaker Playback Volume", WM8940_SPKVOL,
+		       0, 63, 0, wm8940_spk_vol_tlv),
+	SOC_SINGLE("Speaker Playback Switch", WM8940_SPKVOL,  6, 1, 1),
+
+	SOC_SINGLE_TLV("Speaker Mixer Line Bypass Volume", WM8940_SPKVOL,
+		       8, 1, 1, wm8940_att_tlv),
+	SOC_SINGLE("Speaker Playback ZC Switch", WM8940_SPKVOL, 7, 1, 0),
+
+	SOC_SINGLE("Mono Out Switch", WM8940_MONOMIX, 6, 1, 1),
+	SOC_SINGLE_TLV("Mono Mixer Line Bypass Volume", WM8940_MONOMIX,
+		       7, 1, 1, wm8940_att_tlv),
+
+	SOC_SINGLE("High Pass Filter Switch", WM8940_ADC, 8, 1, 0),
+	SOC_ENUM("High Pass Filter Mode", wm8940_filter_mode_enum),
+	SOC_SINGLE("High Pass Filter Cut Off", WM8940_ADC, 4, 7, 0),
+	SOC_SINGLE("ADC Inversion Switch", WM8940_ADC, 0, 1, 0),
+	SOC_SINGLE("DAC Inversion Switch", WM8940_DAC, 0, 1, 0),
+	SOC_SINGLE("DAC Auto Mute Switch", WM8940_DAC, 2, 1, 0),
+	SOC_SINGLE("ZC Timeout Clock Switch", WM8940_ADDCNTRL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8940_speaker_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_SPKMIX, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_SPKMIX, 5, 1, 0),
+	SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_SPKMIX, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8940_mono_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_MONOMIX, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_MONOMIX, 2, 1, 0),
+	SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_MONOMIX, 0, 1, 0),
+};
+
+static DECLARE_TLV_DB_SCALE(wm8940_boost_vol_tlv, -1500, 300, 1);
+static const struct snd_kcontrol_new wm8940_input_boost_controls[] = {
+	SOC_DAPM_SINGLE("Mic PGA Switch", WM8940_PGAGAIN, 6, 1, 1),
+	SOC_DAPM_SINGLE_TLV("Aux Volume", WM8940_ADCBOOST,
+			    0, 7, 0, wm8940_boost_vol_tlv),
+	SOC_DAPM_SINGLE_TLV("Mic Volume", WM8940_ADCBOOST,
+			    4, 7, 0, wm8940_boost_vol_tlv),
+};
+
+static const struct snd_kcontrol_new wm8940_micpga_controls[] = {
+	SOC_DAPM_SINGLE("AUX Switch", WM8940_INPUTCTL, 2, 1, 0),
+	SOC_DAPM_SINGLE("MICP Switch", WM8940_INPUTCTL, 0, 1, 0),
+	SOC_DAPM_SINGLE("MICN Switch", WM8940_INPUTCTL, 1, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8940_dapm_widgets[] = {
+	SND_SOC_DAPM_MIXER("Speaker Mixer", WM8940_POWER3, 2, 0,
+			   &wm8940_speaker_mixer_controls[0],
+			   ARRAY_SIZE(wm8940_speaker_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Mono Mixer", WM8940_POWER3, 3, 0,
+			   &wm8940_mono_mixer_controls[0],
+			   ARRAY_SIZE(wm8940_mono_mixer_controls)),
+	SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8940_POWER3, 0, 0),
+
+	SND_SOC_DAPM_PGA("SpkN Out", WM8940_POWER3, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("SpkP Out", WM8940_POWER3, 6, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Mono Out", WM8940_POWER3, 7, 0, NULL, 0),
+	SND_SOC_DAPM_OUTPUT("MONOOUT"),
+	SND_SOC_DAPM_OUTPUT("SPKOUTP"),
+	SND_SOC_DAPM_OUTPUT("SPKOUTN"),
+
+	SND_SOC_DAPM_PGA("Aux Input", WM8940_POWER1, 6, 0, NULL, 0),
+	SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8940_POWER2, 0, 0),
+	SND_SOC_DAPM_MIXER("Mic PGA", WM8940_POWER2, 2, 0,
+			   &wm8940_micpga_controls[0],
+			   ARRAY_SIZE(wm8940_micpga_controls)),
+	SND_SOC_DAPM_MIXER("Boost Mixer", WM8940_POWER2, 4, 0,
+			   &wm8940_input_boost_controls[0],
+			   ARRAY_SIZE(wm8940_input_boost_controls)),
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8940_POWER1, 4, 0),
+
+	SND_SOC_DAPM_INPUT("MICN"),
+	SND_SOC_DAPM_INPUT("MICP"),
+	SND_SOC_DAPM_INPUT("AUX"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Mono output mixer */
+	{"Mono Mixer", "PCM Playback Switch", "DAC"},
+	{"Mono Mixer", "Aux Playback Switch", "Aux Input"},
+	{"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+	/* Speaker output mixer */
+	{"Speaker Mixer", "PCM Playback Switch", "DAC"},
+	{"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
+	{"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+	/* Outputs */
+	{"Mono Out", NULL, "Mono Mixer"},
+	{"MONOOUT", NULL, "Mono Out"},
+	{"SpkN Out", NULL, "Speaker Mixer"},
+	{"SpkP Out", NULL, "Speaker Mixer"},
+	{"SPKOUTN", NULL, "SpkN Out"},
+	{"SPKOUTP", NULL, "SpkP Out"},
+
+	/*  Microphone PGA */
+	{"Mic PGA", "MICN Switch", "MICN"},
+	{"Mic PGA", "MICP Switch", "MICP"},
+	{"Mic PGA", "AUX Switch", "AUX"},
+
+	/* Boost Mixer */
+	{"Boost Mixer", "Mic PGA Switch", "Mic PGA"},
+	{"Boost Mixer", "Mic Volume",  "MICP"},
+	{"Boost Mixer", "Aux Volume", "Aux Input"},
+
+	{"ADC", NULL, "Boost Mixer"},
+};
+
+static int wm8940_add_widgets(struct snd_soc_codec *codec)
+{
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(codec, wm8940_dapm_widgets,
+					ARRAY_SIZE(wm8940_dapm_widgets));
+	if (ret)
+		goto error_ret;
+	ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	if (ret)
+		goto error_ret;
+	ret = snd_soc_dapm_new_widgets(codec);
+
+error_ret:
+	return ret;
+}
+
+#define wm8940_reset(c) wm8940_write(c, WM8940_SOFTRESET, 0);
+
+static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFE67;
+	u16 clk = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0x1fe;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		clk |= 1;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+	wm8940_write(codec, WM8940_CLOCK, clk);
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= (2 << 3);
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= (1 << 3);
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= (3 << 3);
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= (3 << 3) | (1 << 7);
+		break;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= (1 << 7);
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= (1 << 8);
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= (1 << 8) | (1 << 7);
+		break;
+	}
+
+	wm8940_write(codec, WM8940_IFACE, iface);
+
+	return 0;
+}
+
+static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFD9F;
+	u16 addcntrl = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFF1;
+	u16 companding =  wm8940_read_reg_cache(codec,
+						WM8940_COMPANDINGCTL) & 0xFFDF;
+	int ret;
+
+	/* LoutR control */
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
+	    && params_channels(params) == 2)
+		iface |= (1 << 9);
+
+	switch (params_rate(params)) {
+	case SNDRV_PCM_RATE_8000:
+		addcntrl |= (0x5 << 1);
+		break;
+	case SNDRV_PCM_RATE_11025:
+		addcntrl |= (0x4 << 1);
+		break;
+	case SNDRV_PCM_RATE_16000:
+		addcntrl |= (0x3 << 1);
+		break;
+	case SNDRV_PCM_RATE_22050:
+		addcntrl |= (0x2 << 1);
+		break;
+	case SNDRV_PCM_RATE_32000:
+		addcntrl |= (0x1 << 1);
+		break;
+	case SNDRV_PCM_RATE_44100:
+	case SNDRV_PCM_RATE_48000:
+		break;
+	}
+	ret = wm8940_write(codec, WM8940_ADDCNTRL, addcntrl);
+	if (ret)
+		goto error_ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		companding = companding | (1 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= (1 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= (2 << 5);
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= (3 << 5);
+		break;
+	}
+	ret = wm8940_write(codec, WM8940_COMPANDINGCTL, companding);
+	if (ret)
+		goto error_ret;
+	ret = wm8940_write(codec, WM8940_IFACE, iface);
+
+error_ret:
+	return ret;
+}
+
+static int wm8940_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8940_read_reg_cache(codec, WM8940_DAC) & 0xffbf;
+
+	if (mute)
+		mute_reg |= 0x40;
+
+	return wm8940_write(codec, WM8940_DAC, mute_reg);
+}
+
+static int wm8940_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 val;
+	u16 pwr_reg = wm8940_read_reg_cache(codec, WM8940_POWER1) & 0x1F0;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		/* Enable thermal shutdown */
+		val = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
+		ret = wm8940_write(codec, WM8940_OUTPUTCTL, val | 0x2);
+		if (ret)
+			break;
+		/* set vmid to 75k */
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		/* ensure bufioen and biasen */
+		pwr_reg |= (1 << 2) | (1 << 3);
+		/* set vmid to 300k for standby */
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x2);
+		break;
+	case SND_SOC_BIAS_OFF:
+		ret = wm8940_write(codec, WM8940_POWER1, pwr_reg);
+		break;
+	}
+
+	return ret;
+}
+
+struct pll_ {
+	unsigned int pre_scale:2;
+	unsigned int n:4;
+	unsigned int k;
+};
+
+static struct pll_ pll_div;
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+static void pll_factors(unsigned int target, unsigned int source)
+{
+	unsigned long long Kpart;
+	unsigned int K, Ndiv, Nmod;
+	/* The left shift ist to avoid accuracy loss when right shifting */
+	Ndiv = target / source;
+
+	if (Ndiv > 12) {
+		source <<= 1;
+		/* Multiply by 2 */
+		pll_div.pre_scale = 0;
+		Ndiv = target / source;
+	} else if (Ndiv < 3) {
+		source >>= 2;
+		/* Divide by 4 */
+		pll_div.pre_scale = 3;
+		Ndiv = target / source;
+	} else if (Ndiv < 6) {
+		source >>= 1;
+		/* divide by 2 */
+		pll_div.pre_scale = 2;
+		Ndiv = target / source;
+	} else
+		pll_div.pre_scale = 1;
+
+	if ((Ndiv < 6) || (Ndiv > 12))
+		printk(KERN_WARNING
+			"WM8940 N value %d outwith recommended range!d\n",
+			Ndiv);
+
+	pll_div.n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	/* Check if we need to round */
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	K /= 10;
+
+	pll_div.k = K;
+}
+
+/* Untested at the moment */
+static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	/* Turn off PLL */
+	reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
+	wm8940_write(codec, WM8940_POWER1, reg & 0x1df);
+
+	if (freq_in == 0 || freq_out == 0) {
+		/* Clock CODEC directly from MCLK */
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
+		wm8940_write(codec, WM8940_CLOCK, reg & 0x0ff);
+		/* Pll power down */
+		wm8940_write(codec, WM8940_PLLN, (1 << 7));
+		return 0;
+	}
+
+	/* Pll is followed by a frequency divide by 4 */
+	pll_factors(freq_out*4, freq_in);
+	if (pll_div.k)
+		wm8940_write(codec, WM8940_PLLN,
+			     (pll_div.pre_scale << 4) | pll_div.n | (1 << 6));
+	else /* No factional component */
+		wm8940_write(codec, WM8940_PLLN,
+			     (pll_div.pre_scale << 4) | pll_div.n);
+	wm8940_write(codec, WM8940_PLLK1, pll_div.k >> 18);
+	wm8940_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
+	wm8940_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
+	/* Enable the PLL */
+	reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
+	wm8940_write(codec, WM8940_POWER1, reg | 0x020);
+
+	/* Run CODEC from PLL instead of MCLK */
+	reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
+	wm8940_write(codec, WM8940_CLOCK, reg | 0x100);
+
+	return 0;
+}
+
+static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				 int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8940_priv *wm8940 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 12000000:
+	case 12288000:
+	case 16934400:
+	case 18432000:
+		wm8940->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+				 int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+	int ret = 0;
+
+	switch (div_id) {
+	case WM8940_BCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFFEF3;
+		ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 2));
+		break;
+	case WM8940_MCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFF1F;
+		ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 5));
+		break;
+	case WM8940_OPCLKDIV:
+		reg = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFCF;
+		ret = wm8940_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
+		break;
+	}
+	return ret;
+}
+
+#define WM8940_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 |				\
+			SNDRV_PCM_FMTBIT_S16_LE |			\
+			SNDRV_PCM_FMTBIT_S20_3LE |			\
+			SNDRV_PCM_FMTBIT_S24_LE |			\
+			SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8940_dai_ops = {
+	.hw_params = wm8940_i2s_hw_params,
+	.set_sysclk = wm8940_set_dai_sysclk,
+	.digital_mute = wm8940_mute,
+	.set_fmt = wm8940_set_dai_fmt,
+	.set_clkdiv = wm8940_set_dai_clkdiv,
+	.set_pll = wm8940_set_dai_pll,
+};
+
+struct snd_soc_dai wm8940_dai = {
+	.name = "WM8940",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8940_RATES,
+		.formats = WM8940_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8940_RATES,
+		.formats = WM8940_FORMATS,
+	},
+	.ops = &wm8940_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8940_dai);
+
+static int wm8940_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	return wm8940_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int wm8940_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	int ret;
+	u8 data[3];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware
+	 * Could use auto incremented writes to speed this up
+	 */
+	for (i = 0; i < ARRAY_SIZE(wm8940_reg_defaults); i++) {
+		data[0] = i;
+		data[1] = (cache[i] & 0xFF00) >> 8;
+		data[2] = cache[i] & 0x00FF;
+		ret = codec->hw_write(codec->control_data, data, 3);
+		if (ret < 0)
+			goto error_ret;
+		else if (ret != 3) {
+			ret = -EIO;
+			goto error_ret;
+		}
+	}
+	ret = wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	if (ret)
+		goto error_ret;
+	ret = wm8940_set_bias_level(codec, codec->suspend_bias_level);
+
+error_ret:
+	return ret;
+}
+
+static struct snd_soc_codec *wm8940_codec;
+
+static int wm8940_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+
+	int ret = 0;
+
+	if (wm8940_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8940_codec;
+	codec = wm8940_codec;
+
+	mutex_init(&codec->mutex);
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	ret = snd_soc_add_controls(codec, wm8940_snd_controls,
+			     ARRAY_SIZE(wm8940_snd_controls));
+	if (ret)
+		goto error_free_pcms;
+	ret = wm8940_add_widgets(codec);
+	if (ret)
+		goto error_free_pcms;
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto error_free_pcms;
+	}
+
+	return ret;
+
+error_free_pcms:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm8940_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8940 = {
+	.probe = wm8940_probe,
+	.remove = wm8940_remove,
+	.suspend = wm8940_suspend,
+	.resume = wm8940_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940);
+
+static int wm8940_register(struct wm8940_priv *wm8940)
+{
+	struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data;
+	struct snd_soc_codec *codec = &wm8940->codec;
+	int ret;
+	u16 reg;
+	if (wm8940_codec) {
+		dev_err(codec->dev, "Another WM8940 is registered\n");
+		return -EINVAL;
+	}
+
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8940;
+	codec->name = "WM8940";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8940_read_reg_cache;
+	codec->write = wm8940_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8940_set_bias_level;
+	codec->dai = &wm8940_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults);
+	codec->reg_cache = &wm8940->reg_cache;
+
+	memcpy(codec->reg_cache, wm8940_reg_defaults,
+	       sizeof(wm8940_reg_defaults));
+
+	ret = wm8940_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm8940_dai.dev = codec->dev;
+
+	wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	ret = wm8940_write(codec, WM8940_POWER1, 0x180);
+	if (ret < 0)
+		return ret;
+
+	if (!pdata)
+		dev_warn(codec->dev, "No platform data supplied\n");
+	else {
+		reg = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
+		ret = wm8940_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
+		if (ret < 0)
+			return ret;
+	}
+
+
+	wm8940_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8940_dai);
+	if (ret) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wm8940_unregister(struct wm8940_priv *wm8940)
+{
+	wm8940_set_bias_level(&wm8940->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8940_dai);
+	snd_soc_unregister_codec(&wm8940->codec);
+	kfree(wm8940);
+	wm8940_codec = NULL;
+}
+
+static int wm8940_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8940_priv *wm8940;
+	struct snd_soc_codec *codec;
+
+	wm8940 = kzalloc(sizeof *wm8940, GFP_KERNEL);
+	if (wm8940 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8940->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	i2c_set_clientdata(i2c, wm8940);
+	codec->control_data = i2c;
+	codec->dev = &i2c->dev;
+
+	return wm8940_register(wm8940);
+}
+
+static int __devexit wm8940_i2c_remove(struct i2c_client *client)
+{
+	struct wm8940_priv *wm8940 = i2c_get_clientdata(client);
+
+	wm8940_unregister(wm8940);
+
+	return 0;
+}
+
+static const struct i2c_device_id wm8940_i2c_id[] = {
+	{ "wm8940", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8940_i2c_id);
+
+static struct i2c_driver wm8940_i2c_driver = {
+	.driver = {
+		.name = "WM8940 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm8940_i2c_probe,
+	.remove = __devexit_p(wm8940_i2c_remove),
+	.id_table = wm8940_i2c_id,
+};
+
+static int __init wm8940_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8940_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "Failed to register WM8940 I2C driver: %d\n",
+		       ret);
+	return ret;
+}
+module_init(wm8940_modinit);
+
+static void __exit wm8940_exit(void)
+{
+	i2c_del_driver(&wm8940_i2c_driver);
+}
+module_exit(wm8940_exit);
+
+MODULE_DESCRIPTION("ASoC WM8940 driver");
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h
new file mode 100644
index 00000000000..8410eed3ef8
--- /dev/null
+++ b/sound/soc/codecs/wm8940.h
@@ -0,0 +1,104 @@
+/*
+ * wm8940.h -- WM8940 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8940_H
+#define _WM8940_H
+
+struct wm8940_setup_data {
+	/* Vref to analogue output resistance */
+#define WM8940_VROI_1K 0
+#define WM8940_VROI_30K 1
+	unsigned int vroi:1;
+};
+extern struct snd_soc_dai wm8940_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8940;
+
+/* WM8940 register space */
+#define WM8940_SOFTRESET	0x00
+#define WM8940_POWER1		0x01
+#define WM8940_POWER2		0x02
+#define WM8940_POWER3		0x03
+#define WM8940_IFACE		0x04
+#define WM8940_COMPANDINGCTL	0x05
+#define WM8940_CLOCK		0x06
+#define WM8940_ADDCNTRL		0x07
+#define WM8940_GPIO		0x08
+#define WM8940_CTLINT		0x09
+#define WM8940_DAC		0x0A
+#define WM8940_DACVOL		0x0B
+
+#define WM8940_ADC		0x0E
+#define WM8940_ADCVOL		0x0F
+#define WM8940_NOTCH1		0x10
+#define WM8940_NOTCH2		0x11
+#define WM8940_NOTCH3		0x12
+#define WM8940_NOTCH4		0x13
+#define WM8940_NOTCH5		0x14
+#define WM8940_NOTCH6		0x15
+#define WM8940_NOTCH7		0x16
+#define WM8940_NOTCH8		0x17
+#define WM8940_DACLIM1		0x18
+#define WM8940_DACLIM2		0x19
+
+#define WM8940_ALC1		0x20
+#define WM8940_ALC2		0x21
+#define WM8940_ALC3		0x22
+#define WM8940_NOISEGATE	0x23
+#define WM8940_PLLN		0x24
+#define WM8940_PLLK1		0x25
+#define WM8940_PLLK2		0x26
+#define WM8940_PLLK3		0x27
+
+#define WM8940_ALC4		0x2A
+
+#define WM8940_INPUTCTL		0x2C
+#define WM8940_PGAGAIN		0x2D
+
+#define WM8940_ADCBOOST		0x2F
+
+#define WM8940_OUTPUTCTL	0x31
+#define WM8940_SPKMIX		0x32
+
+#define WM8940_SPKVOL		0x36
+
+#define WM8940_MONOMIX		0x38
+
+#define WM8940_CACHEREGNUM  0x57
+
+
+/* Clock divider Id's */
+#define WM8940_BCLKDIV 0
+#define WM8940_MCLKDIV 1
+#define WM8940_OPCLKDIV 2
+
+/* MCLK clock dividers */
+#define WM8940_MCLKDIV_1	0
+#define WM8940_MCLKDIV_1_5	1
+#define WM8940_MCLKDIV_2	2
+#define WM8940_MCLKDIV_3	3
+#define WM8940_MCLKDIV_4	4
+#define WM8940_MCLKDIV_6	5
+#define WM8940_MCLKDIV_8	6
+#define WM8940_MCLKDIV_12	7
+
+/* BCLK clock dividers */
+#define WM8940_BCLKDIV_1 0
+#define WM8940_BCLKDIV_2 1
+#define WM8940_BCLKDIV_4 2
+#define WM8940_BCLKDIV_8 3
+#define WM8940_BCLKDIV_16 4
+#define WM8940_BCLKDIV_32 5
+
+/* PLL Out Dividers */
+#define WM8940_OPCLKDIV_1 0
+#define WM8940_OPCLKDIV_2 1
+#define WM8940_OPCLKDIV_3 2
+#define WM8940_OPCLKDIV_4 3
+
+#endif /* _WM8940_H */
+
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
new file mode 100644
index 00000000000..e224d8add17
--- /dev/null
+++ b/sound/soc/codecs/wm8960.c
@@ -0,0 +1,969 @@
+/*
+ * wm8960.c  --  WM8960 ALSA SoC Audio driver
+ *
+ * Author: Liam Girdwood
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8960.h"
+
+#define AUDIO_NAME "wm8960"
+
+struct snd_soc_codec_device soc_codec_dev_wm8960;
+
+/* R25 - Power 1 */
+#define WM8960_VREF      0x40
+
+/* R28 - Anti-pop 1 */
+#define WM8960_POBCTRL   0x80
+#define WM8960_BUFDCOPEN 0x10
+#define WM8960_BUFIOEN   0x08
+#define WM8960_SOFT_ST   0x04
+#define WM8960_HPSTBY    0x01
+
+/* R29 - Anti-pop 2 */
+#define WM8960_DISOP     0x40
+
+/*
+ * wm8960 register cache
+ * We can't read the WM8960 register space when we are
+ * using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8960_reg[WM8960_CACHEREGNUM] = {
+	0x0097, 0x0097, 0x0000, 0x0000,
+	0x0000, 0x0008, 0x0000, 0x000a,
+	0x01c0, 0x0000, 0x00ff, 0x00ff,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x007b, 0x0100, 0x0032,
+	0x0000, 0x00c3, 0x00c3, 0x01c0,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000,
+	0x0100, 0x0100, 0x0050, 0x0050,
+	0x0050, 0x0050, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0040, 0x0000,
+	0x0000, 0x0050, 0x0050, 0x0000,
+	0x0002, 0x0037, 0x004d, 0x0080,
+	0x0008, 0x0031, 0x0026, 0x00e9,
+};
+
+struct wm8960_priv {
+	u16 reg_cache[WM8960_CACHEREGNUM];
+	struct snd_soc_codec codec;
+};
+
+/*
+ * read wm8960 register cache
+ */
+static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg == WM8960_RESET)
+		return 0;
+	if (reg >= WM8960_CACHEREGNUM)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write wm8960 register cache
+ */
+static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec,
+	u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg >= WM8960_CACHEREGNUM)
+		return;
+	cache[reg] = value;
+}
+
+static inline unsigned int wm8960_read(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	return wm8960_read_reg_cache(codec, reg);
+}
+
+/*
+ * write to the WM8960 register space
+ */
+static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8960 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8960_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8960_reset(c)	wm8960_write(c, WM8960_RESET, 0)
+
+/* enumerated controls */
+static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
+	"Right Inverted", "Stereo Inversion"};
+static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
+static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
+static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
+static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
+
+static const struct soc_enum wm8960_enum[] = {
+	SOC_ENUM_SINGLE(WM8960_DACCTL1, 1, 4, wm8960_deemph),
+	SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
+	SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
+	SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
+	SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff),
+	SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
+	SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
+};
+
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+
+static const struct snd_kcontrol_new wm8960_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
+		 0, 63, 0, adc_tlv),
+SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
+	6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
+	7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC,
+		 0, 255, 0, dac_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1,
+	7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2,
+	7, 1, 0),
+SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
+
+SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
+SOC_ENUM("ADC Polarity", wm8960_enum[1]),
+SOC_ENUM("Playback De-emphasis", wm8960_enum[0]),
+SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
+
+SOC_ENUM("DAC Polarity", wm8960_enum[2]),
+
+SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[3]),
+SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[4]),
+SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
+SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
+
+SOC_ENUM("ALC Function", wm8960_enum[5]),
+SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
+SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
+SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
+SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
+SOC_ENUM("ALC Mode", wm8960_enum[6]),
+SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
+
+SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0),
+SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0),
+
+SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH,
+	0, 127, 0),
+
+SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume",
+	       WM8960_BYPASS1, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume",
+	       WM8960_LOUTMIX, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume",
+	       WM8960_BYPASS2, 4, 7, 1, bypass_tlv),
+SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
+	       WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
+};
+
+static const struct snd_kcontrol_new wm8960_lin_boost[] = {
+SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
+SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_lin[] = {
+SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_rin_boost[] = {
+SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0),
+SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_rin[] = {
+SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_loutput_mixer[] = {
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0),
+SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_routput_mixer[] = {
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0),
+SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8960_mono_out[] = {
+SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("LINPUT1"),
+SND_SOC_DAPM_INPUT("RINPUT1"),
+SND_SOC_DAPM_INPUT("LINPUT2"),
+SND_SOC_DAPM_INPUT("RINPUT2"),
+SND_SOC_DAPM_INPUT("LINPUT3"),
+SND_SOC_DAPM_INPUT("RINPUT3"),
+
+SND_SOC_DAPM_MICBIAS("MICB", WM8960_POWER1, 1, 0),
+
+SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0,
+		   wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)),
+SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0,
+		   wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)),
+
+SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0,
+		   wm8960_lin, ARRAY_SIZE(wm8960_lin)),
+SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0,
+		   wm8960_rin, ARRAY_SIZE(wm8960_rin)),
+
+SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER2, 3, 0),
+SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER2, 2, 0),
+
+SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
+SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
+	&wm8960_loutput_mixer[0],
+	ARRAY_SIZE(wm8960_loutput_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0,
+	&wm8960_routput_mixer[0],
+	ARRAY_SIZE(wm8960_routput_mixer)),
+
+SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0,
+	&wm8960_mono_out[0],
+	ARRAY_SIZE(wm8960_mono_out)),
+
+SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("SPK_LP"),
+SND_SOC_DAPM_OUTPUT("SPK_LN"),
+SND_SOC_DAPM_OUTPUT("HP_L"),
+SND_SOC_DAPM_OUTPUT("HP_R"),
+SND_SOC_DAPM_OUTPUT("SPK_RP"),
+SND_SOC_DAPM_OUTPUT("SPK_RN"),
+SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+	{ "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" },
+	{ "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" },
+	{ "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" },
+
+	{ "Left Input Mixer", "Boost Switch", "Left Boost Mixer", },
+	{ "Left Input Mixer", NULL, "LINPUT1", },  /* Really Boost Switch */
+	{ "Left Input Mixer", NULL, "LINPUT2" },
+	{ "Left Input Mixer", NULL, "LINPUT3" },
+
+	{ "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" },
+	{ "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" },
+	{ "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" },
+
+	{ "Right Input Mixer", "Boost Switch", "Right Boost Mixer", },
+	{ "Right Input Mixer", NULL, "RINPUT1", },  /* Really Boost Switch */
+	{ "Right Input Mixer", NULL, "RINPUT2" },
+	{ "Right Input Mixer", NULL, "LINPUT3" },
+
+	{ "Left ADC", NULL, "Left Input Mixer" },
+	{ "Right ADC", NULL, "Right Input Mixer" },
+
+	{ "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
+	{ "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} ,
+	{ "Left Output Mixer", "PCM Playback Switch", "Left DAC" },
+
+	{ "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" },
+	{ "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } ,
+	{ "Right Output Mixer", "PCM Playback Switch", "Right DAC" },
+
+	{ "Mono Output Mixer", "Left Switch", "Left Output Mixer" },
+	{ "Mono Output Mixer", "Right Switch", "Right Output Mixer" },
+
+	{ "LOUT1 PGA", NULL, "Left Output Mixer" },
+	{ "ROUT1 PGA", NULL, "Right Output Mixer" },
+
+	{ "HP_L", NULL, "LOUT1 PGA" },
+	{ "HP_R", NULL, "ROUT1 PGA" },
+
+	{ "Left Speaker PGA", NULL, "Left Output Mixer" },
+	{ "Right Speaker PGA", NULL, "Right Output Mixer" },
+
+	{ "Left Speaker Output", NULL, "Left Speaker PGA" },
+	{ "Right Speaker Output", NULL, "Right Speaker PGA" },
+
+	{ "SPK_LN", NULL, "Left Speaker Output" },
+	{ "SPK_LP", NULL, "Left Speaker Output" },
+	{ "SPK_RN", NULL, "Right Speaker Output" },
+	{ "SPK_RP", NULL, "Right Speaker Output" },
+
+	{ "OUT3", NULL, "Mono Output Mixer", }
+};
+
+static int wm8960_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8960_dapm_widgets,
+				  ARRAY_SIZE(wm8960_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+
+	snd_soc_dapm_new_widgets(codec);
+	return 0;
+}
+
+static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface |= 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set iface */
+	wm8960_write(codec, WM8960_IFACE1, iface);
+	return 0;
+}
+
+static int wm8960_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3;
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	}
+
+	/* set iface */
+	wm8960_write(codec, WM8960_IFACE1, iface);
+	return 0;
+}
+
+static int wm8960_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7;
+
+	if (mute)
+		wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
+	else
+		wm8960_write(codec, WM8960_DACCTL1, mute_reg);
+	return 0;
+}
+
+static int wm8960_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	struct wm8960_data *pdata = codec->dev->platform_data;
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* Set VMID to 2x50k */
+		reg = wm8960_read(codec, WM8960_POWER1);
+		reg &= ~0x180;
+		reg |= 0x80;
+		wm8960_write(codec, WM8960_POWER1, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* Enable anti-pop features */
+			wm8960_write(codec, WM8960_APOP1,
+				     WM8960_POBCTRL | WM8960_SOFT_ST |
+				     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
+
+			/* Discharge HP output */
+			reg = WM8960_DISOP;
+			if (pdata)
+				reg |= pdata->dres << 4;
+			wm8960_write(codec, WM8960_APOP2, reg);
+
+			msleep(400);
+
+			wm8960_write(codec, WM8960_APOP2, 0);
+
+			/* Enable & ramp VMID at 2x50k */
+			reg = wm8960_read(codec, WM8960_POWER1);
+			reg |= 0x80;
+			wm8960_write(codec, WM8960_POWER1, reg);
+			msleep(100);
+
+			/* Enable VREF */
+			wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF);
+
+			/* Disable anti-pop features */
+			wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+		}
+
+		/* Set VMID to 2x250k */
+		reg = wm8960_read(codec, WM8960_POWER1);
+		reg &= ~0x180;
+		reg |= 0x100;
+		wm8960_write(codec, WM8960_POWER1, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Enable anti-pop features */
+		wm8960_write(codec, WM8960_APOP1,
+			     WM8960_POBCTRL | WM8960_SOFT_ST |
+			     WM8960_BUFDCOPEN | WM8960_BUFIOEN);
+
+		/* Disable VMID and VREF, let them discharge */
+		wm8960_write(codec, WM8960_POWER1, 0);
+		msleep(600);
+
+		wm8960_write(codec, WM8960_APOP1, 0);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+/* PLL divisors */
+struct _pll_div {
+	u32 pre_div:1;
+	u32 n:4;
+	u32 k:24;
+};
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+
+static int pll_factors(unsigned int source, unsigned int target,
+		       struct _pll_div *pll_div)
+{
+	unsigned long long Kpart;
+	unsigned int K, Ndiv, Nmod;
+
+	pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target);
+
+	/* Scale up target to PLL operating frequency */
+	target *= 4;
+
+	Ndiv = target / source;
+	if (Ndiv < 6) {
+		source >>= 1;
+		pll_div->pre_div = 1;
+		Ndiv = target / source;
+	} else
+		pll_div->pre_div = 0;
+
+	if ((Ndiv < 6) || (Ndiv > 12)) {
+		pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);
+		return -EINVAL;
+	}
+
+	pll_div->n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	/* Check if we need to round */
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	K /= 10;
+
+	pll_div->k = K;
+
+	pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n",
+		 pll_div->n, pll_div->k, pll_div->pre_div);
+
+	return 0;
+}
+
+static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+	static struct _pll_div pll_div;
+	int ret;
+
+	if (freq_in && freq_out) {
+		ret = pll_factors(freq_in, freq_out, &pll_div);
+		if (ret != 0)
+			return ret;
+	}
+
+	/* Disable the PLL: even if we are changing the frequency the
+	 * PLL needs to be disabled while we do so. */
+	wm8960_write(codec, WM8960_CLOCK1,
+		     wm8960_read(codec, WM8960_CLOCK1) & ~1);
+	wm8960_write(codec, WM8960_POWER2,
+		     wm8960_read(codec, WM8960_POWER2) & ~1);
+
+	if (!freq_in || !freq_out)
+		return 0;
+
+	reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f;
+	reg |= pll_div.pre_div << 4;
+	reg |= pll_div.n;
+
+	if (pll_div.k) {
+		reg |= 0x20;
+
+		wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
+		wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
+		wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
+	}
+	wm8960_write(codec, WM8960_PLL1, reg);
+
+	/* Turn it on */
+	wm8960_write(codec, WM8960_POWER2,
+		     wm8960_read(codec, WM8960_POWER2) | 1);
+	msleep(250);
+	wm8960_write(codec, WM8960_CLOCK1,
+		     wm8960_read(codec, WM8960_CLOCK1) | 1);
+
+	return 0;
+}
+
+static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+		int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	switch (div_id) {
+	case WM8960_SYSCLKSEL:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_SYSCLKDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_DACDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7;
+		wm8960_write(codec, WM8960_CLOCK1, reg | div);
+		break;
+	case WM8960_OPCLKDIV:
+		reg = wm8960_read(codec, WM8960_PLL1) & 0x03f;
+		wm8960_write(codec, WM8960_PLL1, reg | div);
+		break;
+	case WM8960_DCLKDIV:
+		reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f;
+		wm8960_write(codec, WM8960_CLOCK2, reg | div);
+		break;
+	case WM8960_TOCLKSEL:
+		reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd;
+		wm8960_write(codec, WM8960_ADDCTL1, reg | div);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#define WM8960_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8960_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8960_dai_ops = {
+	.hw_params = wm8960_hw_params,
+	.digital_mute = wm8960_mute,
+	.set_fmt = wm8960_set_dai_fmt,
+	.set_clkdiv = wm8960_set_dai_clkdiv,
+	.set_pll = wm8960_set_dai_pll,
+};
+
+struct snd_soc_dai wm8960_dai = {
+	.name = "WM8960",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8960_RATES,
+		.formats = WM8960_FORMATS,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8960_RATES,
+		.formats = WM8960_FORMATS,},
+	.ops = &wm8960_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8960_dai);
+
+static int wm8960_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8960_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) {
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	wm8960_set_bias_level(codec, codec->suspend_bias_level);
+	return 0;
+}
+
+static struct snd_soc_codec *wm8960_codec;
+
+static int wm8960_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8960_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8960_codec;
+	codec = wm8960_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8960_snd_controls,
+			     ARRAY_SIZE(wm8960_snd_controls));
+	wm8960_add_widgets(codec);
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8960_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8960 = {
+	.probe = 	wm8960_probe,
+	.remove = 	wm8960_remove,
+	.suspend = 	wm8960_suspend,
+	.resume =	wm8960_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960);
+
+static int wm8960_register(struct wm8960_priv *wm8960)
+{
+	struct wm8960_data *pdata = wm8960->codec.dev->platform_data;
+	struct snd_soc_codec *codec = &wm8960->codec;
+	int ret;
+	u16 reg;
+
+	if (wm8960_codec) {
+		dev_err(codec->dev, "Another WM8960 is registered\n");
+		return -EINVAL;
+	}
+
+	if (!pdata) {
+		dev_warn(codec->dev, "No platform data supplied\n");
+	} else {
+		if (pdata->dres > WM8960_DRES_MAX) {
+			dev_err(codec->dev, "Invalid DRES: %d\n", pdata->dres);
+			pdata->dres = 0;
+		}
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8960;
+	codec->name = "WM8960";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8960_read_reg_cache;
+	codec->write = wm8960_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8960_set_bias_level;
+	codec->dai = &wm8960_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8960_CACHEREGNUM;
+	codec->reg_cache = &wm8960->reg_cache;
+
+	memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg));
+
+	ret = wm8960_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm8960_dai.dev = codec->dev;
+
+	wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Latch the update bits */
+	reg = wm8960_read(codec, WM8960_LINVOL);
+	wm8960_write(codec, WM8960_LINVOL, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RINVOL);
+	wm8960_write(codec, WM8960_RINVOL, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LADC);
+	wm8960_write(codec, WM8960_LADC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RADC);
+	wm8960_write(codec, WM8960_RADC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LDAC);
+	wm8960_write(codec, WM8960_LDAC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_RDAC);
+	wm8960_write(codec, WM8960_RDAC, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LOUT1);
+	wm8960_write(codec, WM8960_LOUT1, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_ROUT1);
+	wm8960_write(codec, WM8960_ROUT1, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_LOUT2);
+	wm8960_write(codec, WM8960_LOUT2, reg | 0x100);
+	reg = wm8960_read(codec, WM8960_ROUT2);
+	wm8960_write(codec, WM8960_ROUT2, reg | 0x100);
+
+	wm8960_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8960_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wm8960_unregister(struct wm8960_priv *wm8960)
+{
+	wm8960_set_bias_level(&wm8960->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8960_dai);
+	snd_soc_unregister_codec(&wm8960->codec);
+	kfree(wm8960);
+	wm8960_codec = NULL;
+}
+
+static __devinit int wm8960_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8960_priv *wm8960;
+	struct snd_soc_codec *codec;
+
+	wm8960 = kzalloc(sizeof(struct wm8960_priv), GFP_KERNEL);
+	if (wm8960 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8960->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8960);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8960_register(wm8960);
+}
+
+static __devexit int wm8960_i2c_remove(struct i2c_client *client)
+{
+	struct wm8960_priv *wm8960 = i2c_get_clientdata(client);
+	wm8960_unregister(wm8960);
+	return 0;
+}
+
+static const struct i2c_device_id wm8960_i2c_id[] = {
+	{ "wm8960", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
+
+static struct i2c_driver wm8960_i2c_driver = {
+	.driver = {
+		.name = "WM8960 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8960_i2c_probe,
+	.remove =   __devexit_p(wm8960_i2c_remove),
+	.id_table = wm8960_i2c_id,
+};
+
+static int __init wm8960_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8960_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n",
+		       ret);
+	}
+
+	return ret;
+}
+module_init(wm8960_modinit);
+
+static void __exit wm8960_exit(void)
+{
+	i2c_del_driver(&wm8960_i2c_driver);
+}
+module_exit(wm8960_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8960 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h
new file mode 100644
index 00000000000..c9af56c9d9d
--- /dev/null
+++ b/sound/soc/codecs/wm8960.h
@@ -0,0 +1,127 @@
+/*
+ * wm8960.h  --  WM8960 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8960_H
+#define _WM8960_H
+
+/* WM8960 register space */
+
+
+#define WM8960_CACHEREGNUM 	56
+
+#define WM8960_LINVOL		0x0
+#define WM8960_RINVOL		0x1
+#define WM8960_LOUT1		0x2
+#define WM8960_ROUT1		0x3
+#define WM8960_CLOCK1		0x4
+#define WM8960_DACCTL1		0x5
+#define WM8960_DACCTL2		0x6
+#define WM8960_IFACE1		0x7
+#define WM8960_CLOCK2		0x8
+#define WM8960_IFACE2		0x9
+#define WM8960_LDAC		0xa
+#define WM8960_RDAC		0xb
+
+#define WM8960_RESET		0xf
+#define WM8960_3D		0x10
+#define WM8960_ALC1		0x11
+#define WM8960_ALC2		0x12
+#define WM8960_ALC3		0x13
+#define WM8960_NOISEG		0x14
+#define WM8960_LADC		0x15
+#define WM8960_RADC		0x16
+#define WM8960_ADDCTL1		0x17
+#define WM8960_ADDCTL2		0x18
+#define WM8960_POWER1		0x19
+#define WM8960_POWER2		0x1a
+#define WM8960_ADDCTL3		0x1b
+#define WM8960_APOP1		0x1c
+#define WM8960_APOP2		0x1d
+
+#define WM8960_LINPATH		0x20
+#define WM8960_RINPATH		0x21
+#define WM8960_LOUTMIX		0x22
+
+#define WM8960_ROUTMIX		0x25
+#define WM8960_MONOMIX1		0x26
+#define WM8960_MONOMIX2		0x27
+#define WM8960_LOUT2		0x28
+#define WM8960_ROUT2		0x29
+#define WM8960_MONO		0x2a
+#define WM8960_INBMIX1		0x2b
+#define WM8960_INBMIX2		0x2c
+#define WM8960_BYPASS1		0x2d
+#define WM8960_BYPASS2		0x2e
+#define WM8960_POWER3		0x2f
+#define WM8960_ADDCTL4		0x30
+#define WM8960_CLASSD1		0x31
+
+#define WM8960_CLASSD3		0x33
+#define WM8960_PLL1		0x34
+#define WM8960_PLL2		0x35
+#define WM8960_PLL3		0x36
+#define WM8960_PLL4		0x37
+
+
+/*
+ * WM8960 Clock dividers
+ */
+#define WM8960_SYSCLKDIV 		0
+#define WM8960_DACDIV			1
+#define WM8960_OPCLKDIV			2
+#define WM8960_DCLKDIV			3
+#define WM8960_TOCLKSEL			4
+#define WM8960_SYSCLKSEL		5
+
+#define WM8960_SYSCLK_DIV_1		(0 << 1)
+#define WM8960_SYSCLK_DIV_2		(2 << 1)
+
+#define WM8960_SYSCLK_MCLK		(0 << 0)
+#define WM8960_SYSCLK_PLL		(1 << 0)
+
+#define WM8960_DAC_DIV_1		(0 << 3)
+#define WM8960_DAC_DIV_1_5		(1 << 3)
+#define WM8960_DAC_DIV_2		(2 << 3)
+#define WM8960_DAC_DIV_3		(3 << 3)
+#define WM8960_DAC_DIV_4		(4 << 3)
+#define WM8960_DAC_DIV_5_5		(5 << 3)
+#define WM8960_DAC_DIV_6		(6 << 3)
+
+#define WM8960_DCLK_DIV_1_5		(0 << 6)
+#define WM8960_DCLK_DIV_2		(1 << 6)
+#define WM8960_DCLK_DIV_3		(2 << 6)
+#define WM8960_DCLK_DIV_4		(3 << 6)
+#define WM8960_DCLK_DIV_6		(4 << 6)
+#define WM8960_DCLK_DIV_8		(5 << 6)
+#define WM8960_DCLK_DIV_12		(6 << 6)
+#define WM8960_DCLK_DIV_16		(7 << 6)
+
+#define WM8960_TOCLK_F19		(0 << 1)
+#define WM8960_TOCLK_F21		(1 << 1)
+
+#define WM8960_OPCLK_DIV_1		(0 << 0)
+#define WM8960_OPCLK_DIV_2		(1 << 0)
+#define WM8960_OPCLK_DIV_3		(2 << 0)
+#define WM8960_OPCLK_DIV_4		(3 << 0)
+#define WM8960_OPCLK_DIV_5_5		(4 << 0)
+#define WM8960_OPCLK_DIV_6		(5 << 0)
+
+extern struct snd_soc_dai wm8960_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8960;
+
+#define WM8960_DRES_400R 0
+#define WM8960_DRES_200R 1
+#define WM8960_DRES_600R 2
+#define WM8960_DRES_150R 3
+#define WM8960_DRES_MAX  3
+
+struct wm8960_data {
+	int dres;
+};
+
+#endif
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
new file mode 100644
index 00000000000..c05f71803aa
--- /dev/null
+++ b/sound/soc/codecs/wm8988.c
@@ -0,0 +1,1097 @@
+/*
+ * wm8988.c -- WM8988 ALSA SoC audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "wm8988.h"
+
+/*
+ * wm8988 register cache
+ * We can't read the WM8988 register space when we
+ * are using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8988_reg[] = {
+	0x0097, 0x0097, 0x0079, 0x0079,  /*  0 */
+	0x0000, 0x0008, 0x0000, 0x000a,  /*  4 */
+	0x0000, 0x0000, 0x00ff, 0x00ff,  /*  8 */
+	0x000f, 0x000f, 0x0000, 0x0000,  /* 12 */
+	0x0000, 0x007b, 0x0000, 0x0032,  /* 16 */
+	0x0000, 0x00c3, 0x00c3, 0x00c0,  /* 20 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 24 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 28 */
+	0x0000, 0x0000, 0x0050, 0x0050,  /* 32 */
+	0x0050, 0x0050, 0x0050, 0x0050,  /* 36 */
+	0x0079, 0x0079, 0x0079,          /* 40 */
+};
+
+/* codec private data */
+struct wm8988_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	struct snd_pcm_hw_constraint_list *sysclk_constraints;
+	u16 reg_cache[WM8988_NUM_REG];
+};
+
+
+/*
+ * read wm8988 register cache
+ */
+static inline unsigned int wm8988_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg > WM8988_NUM_REG)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write wm8988 register cache
+ */
+static inline void wm8988_write_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg > WM8988_NUM_REG)
+		return;
+	cache[reg] = value;
+}
+
+static int wm8988_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8753 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8988_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8988_reset(c)	wm8988_write(c, WM8988_RESET, 0)
+
+/*
+ * WM8988 Controls
+ */
+
+static const char *bass_boost_txt[] = {"Linear Control", "Adaptive Boost"};
+static const struct soc_enum bass_boost =
+	SOC_ENUM_SINGLE(WM8988_BASS, 7, 2, bass_boost_txt);
+
+static const char *bass_filter_txt[] = { "130Hz @ 48kHz", "200Hz @ 48kHz" };
+static const struct soc_enum bass_filter =
+	SOC_ENUM_SINGLE(WM8988_BASS, 6, 2, bass_filter_txt);
+
+static const char *treble_txt[] = {"8kHz", "4kHz"};
+static const struct soc_enum treble =
+	SOC_ENUM_SINGLE(WM8988_TREBLE, 6, 2, treble_txt);
+
+static const char *stereo_3d_lc_txt[] = {"200Hz", "500Hz"};
+static const struct soc_enum stereo_3d_lc =
+	SOC_ENUM_SINGLE(WM8988_3D, 5, 2, stereo_3d_lc_txt);
+
+static const char *stereo_3d_uc_txt[] = {"2.2kHz", "1.5kHz"};
+static const struct soc_enum stereo_3d_uc =
+	SOC_ENUM_SINGLE(WM8988_3D, 6, 2, stereo_3d_uc_txt);
+
+static const char *stereo_3d_func_txt[] = {"Capture", "Playback"};
+static const struct soc_enum stereo_3d_func =
+	SOC_ENUM_SINGLE(WM8988_3D, 7, 2, stereo_3d_func_txt);
+
+static const char *alc_func_txt[] = {"Off", "Right", "Left", "Stereo"};
+static const struct soc_enum alc_func =
+	SOC_ENUM_SINGLE(WM8988_ALC1, 7, 4, alc_func_txt);
+
+static const char *ng_type_txt[] = {"Constant PGA Gain",
+				    "Mute ADC Output"};
+static const struct soc_enum ng_type =
+	SOC_ENUM_SINGLE(WM8988_NGATE, 1, 2, ng_type_txt);
+
+static const char *deemph_txt[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const struct soc_enum deemph =
+	SOC_ENUM_SINGLE(WM8988_ADCDAC, 1, 4, deemph_txt);
+
+static const char *adcpol_txt[] = {"Normal", "L Invert", "R Invert",
+				   "L + R Invert"};
+static const struct soc_enum adcpol =
+	SOC_ENUM_SINGLE(WM8988_ADCDAC, 5, 4, adcpol_txt);
+
+static const DECLARE_TLV_DB_SCALE(pga_tlv, -1725, 75, 0);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
+
+static const struct snd_kcontrol_new wm8988_snd_controls[] = {
+
+SOC_ENUM("Bass Boost", bass_boost),
+SOC_ENUM("Bass Filter", bass_filter),
+SOC_SINGLE("Bass Volume", WM8988_BASS, 0, 15, 1),
+
+SOC_SINGLE("Treble Volume", WM8988_TREBLE, 0, 15, 0),
+SOC_ENUM("Treble Cut-off", treble),
+
+SOC_SINGLE("3D Switch", WM8988_3D, 0, 1, 0),
+SOC_SINGLE("3D Volume", WM8988_3D, 1, 15, 0),
+SOC_ENUM("3D Lower Cut-off", stereo_3d_lc),
+SOC_ENUM("3D Upper Cut-off", stereo_3d_uc),
+SOC_ENUM("3D Mode", stereo_3d_func),
+
+SOC_SINGLE("ALC Capture Target Volume", WM8988_ALC1, 0, 7, 0),
+SOC_SINGLE("ALC Capture Max Volume", WM8988_ALC1, 4, 7, 0),
+SOC_ENUM("ALC Capture Function", alc_func),
+SOC_SINGLE("ALC Capture ZC Switch", WM8988_ALC2, 7, 1, 0),
+SOC_SINGLE("ALC Capture Hold Time", WM8988_ALC2, 0, 15, 0),
+SOC_SINGLE("ALC Capture Decay Time", WM8988_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Capture Attack Time", WM8988_ALC3, 0, 15, 0),
+SOC_SINGLE("ALC Capture NG Threshold", WM8988_NGATE, 3, 31, 0),
+SOC_ENUM("ALC Capture NG Type", ng_type),
+SOC_SINGLE("ALC Capture NG Switch", WM8988_NGATE, 0, 1, 0),
+
+SOC_SINGLE("ZC Timeout Switch", WM8988_ADCTL1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Digital Volume", WM8988_LADC, WM8988_RADC,
+		 0, 255, 0, adc_tlv),
+SOC_DOUBLE_R_TLV("Capture Volume", WM8988_LINVOL, WM8988_RINVOL,
+		 0, 63, 0, pga_tlv),
+SOC_DOUBLE_R("Capture ZC Switch", WM8988_LINVOL, WM8988_RINVOL, 6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8988_LINVOL, WM8988_RINVOL, 7, 1, 1),
+
+SOC_ENUM("Playback De-emphasis", deemph),
+
+SOC_ENUM("Capture Polarity", adcpol),
+SOC_SINGLE("Playback 6dB Attenuate", WM8988_ADCDAC, 7, 1, 0),
+SOC_SINGLE("Capture 6dB Attenuate", WM8988_ADCDAC, 8, 1, 0),
+
+SOC_DOUBLE_R_TLV("PCM Volume", WM8988_LDAC, WM8988_RDAC, 0, 255, 0, dac_tlv),
+
+SOC_SINGLE_TLV("Left Mixer Left Bypass Volume", WM8988_LOUTM1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Left Mixer Right Bypass Volume", WM8988_LOUTM2, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Mixer Left Bypass Volume", WM8988_ROUTM1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Mixer Right Bypass Volume", WM8988_ROUTM2, 4, 7, 1,
+	       bypass_tlv),
+
+SOC_DOUBLE_R("Output 1 Playback ZC Switch", WM8988_LOUT1V,
+	     WM8988_ROUT1V, 7, 1, 0),
+SOC_DOUBLE_R_TLV("Output 1 Playback Volume", WM8988_LOUT1V, WM8988_ROUT1V,
+		 0, 127, 0, out_tlv),
+
+SOC_DOUBLE_R("Output 2 Playback ZC Switch", WM8988_LOUT2V,
+	     WM8988_ROUT2V, 7, 1, 0),
+SOC_DOUBLE_R_TLV("Output 2 Playback Volume", WM8988_LOUT2V, WM8988_ROUT2V,
+		 0, 127, 0, out_tlv),
+
+};
+
+/*
+ * DAPM Controls
+ */
+
+static int wm8988_lrc_control(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 adctl2 = wm8988_read_reg_cache(codec, WM8988_ADCTL2);
+
+	/* Use the DAC to gate LRC if active, otherwise use ADC */
+	if (wm8988_read_reg_cache(codec, WM8988_PWR2) & 0x180)
+		adctl2 &= ~0x4;
+	else
+		adctl2 |= 0x4;
+
+	return wm8988_write(codec, WM8988_ADCTL2, adctl2);
+}
+
+static const char *wm8988_line_texts[] = {
+	"Line 1", "Line 2", "PGA", "Differential"};
+
+static const unsigned int wm8988_line_values[] = {
+	0, 1, 3, 4};
+
+static const struct soc_enum wm8988_lline_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_LOUTM1, 0, 7,
+			      ARRAY_SIZE(wm8988_line_texts),
+			      wm8988_line_texts,
+			      wm8988_line_values);
+static const struct snd_kcontrol_new wm8988_left_line_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
+
+static const struct soc_enum wm8988_rline_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_ROUTM1, 0, 7,
+			      ARRAY_SIZE(wm8988_line_texts),
+			      wm8988_line_texts,
+			      wm8988_line_values);
+static const struct snd_kcontrol_new wm8988_right_line_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lline_enum);
+
+/* Left Mixer */
+static const struct snd_kcontrol_new wm8988_left_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Playback Switch", WM8988_LOUTM1, 8, 1, 0),
+	SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_LOUTM1, 7, 1, 0),
+	SOC_DAPM_SINGLE("Right Playback Switch", WM8988_LOUTM2, 8, 1, 0),
+	SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_LOUTM2, 7, 1, 0),
+};
+
+/* Right Mixer */
+static const struct snd_kcontrol_new wm8988_right_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Left Playback Switch", WM8988_ROUTM1, 8, 1, 0),
+	SOC_DAPM_SINGLE("Left Bypass Switch", WM8988_ROUTM1, 7, 1, 0),
+	SOC_DAPM_SINGLE("Playback Switch", WM8988_ROUTM2, 8, 1, 0),
+	SOC_DAPM_SINGLE("Right Bypass Switch", WM8988_ROUTM2, 7, 1, 0),
+};
+
+static const char *wm8988_pga_sel[] = {"Line 1", "Line 2", "Differential"};
+static const unsigned int wm8988_pga_val[] = { 0, 1, 3 };
+
+/* Left PGA Mux */
+static const struct soc_enum wm8988_lpga_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_LADCIN, 6, 3,
+			      ARRAY_SIZE(wm8988_pga_sel),
+			      wm8988_pga_sel,
+			      wm8988_pga_val);
+static const struct snd_kcontrol_new wm8988_left_pga_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_lpga_enum);
+
+/* Right PGA Mux */
+static const struct soc_enum wm8988_rpga_enum =
+	SOC_VALUE_ENUM_SINGLE(WM8988_RADCIN, 6, 3,
+			      ARRAY_SIZE(wm8988_pga_sel),
+			      wm8988_pga_sel,
+			      wm8988_pga_val);
+static const struct snd_kcontrol_new wm8988_right_pga_controls =
+	SOC_DAPM_VALUE_ENUM("Route", wm8988_rpga_enum);
+
+/* Differential Mux */
+static const char *wm8988_diff_sel[] = {"Line 1", "Line 2"};
+static const struct soc_enum diffmux =
+	SOC_ENUM_SINGLE(WM8988_ADCIN, 8, 2, wm8988_diff_sel);
+static const struct snd_kcontrol_new wm8988_diffmux_controls =
+	SOC_DAPM_ENUM("Route", diffmux);
+
+/* Mono ADC Mux */
+static const char *wm8988_mono_mux[] = {"Stereo", "Mono (Left)",
+	"Mono (Right)", "Digital Mono"};
+static const struct soc_enum monomux =
+	SOC_ENUM_SINGLE(WM8988_ADCIN, 6, 4, wm8988_mono_mux);
+static const struct snd_kcontrol_new wm8988_monomux_controls =
+	SOC_DAPM_ENUM("Route", monomux);
+
+static const struct snd_soc_dapm_widget wm8988_dapm_widgets[] = {
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8988_PWR1, 1, 0),
+
+	SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_diffmux_controls),
+	SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_monomux_controls),
+	SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_monomux_controls),
+
+	SND_SOC_DAPM_MUX("Left PGA Mux", WM8988_PWR1, 5, 0,
+		&wm8988_left_pga_controls),
+	SND_SOC_DAPM_MUX("Right PGA Mux", WM8988_PWR1, 4, 0,
+		&wm8988_right_pga_controls),
+
+	SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_left_line_controls),
+	SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8988_right_line_controls),
+
+	SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8988_PWR1, 2, 0),
+	SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8988_PWR1, 3, 0),
+
+	SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8988_PWR2, 7, 0),
+	SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8988_PWR2, 8, 0),
+
+	SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8988_left_mixer_controls[0],
+		ARRAY_SIZE(wm8988_left_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8988_right_mixer_controls[0],
+		ARRAY_SIZE(wm8988_right_mixer_controls)),
+
+	SND_SOC_DAPM_PGA("Right Out 2", WM8988_PWR2, 3, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 2", WM8988_PWR2, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Out 1", WM8988_PWR2, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 1", WM8988_PWR2, 6, 0, NULL, 0),
+
+	SND_SOC_DAPM_POST("LRC control", wm8988_lrc_control),
+
+	SND_SOC_DAPM_OUTPUT("LOUT1"),
+	SND_SOC_DAPM_OUTPUT("ROUT1"),
+	SND_SOC_DAPM_OUTPUT("LOUT2"),
+	SND_SOC_DAPM_OUTPUT("ROUT2"),
+	SND_SOC_DAPM_OUTPUT("VREF"),
+
+	SND_SOC_DAPM_INPUT("LINPUT1"),
+	SND_SOC_DAPM_INPUT("LINPUT2"),
+	SND_SOC_DAPM_INPUT("RINPUT1"),
+	SND_SOC_DAPM_INPUT("RINPUT2"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	{ "Left Line Mux", "Line 1", "LINPUT1" },
+	{ "Left Line Mux", "Line 2", "LINPUT2" },
+	{ "Left Line Mux", "PGA", "Left PGA Mux" },
+	{ "Left Line Mux", "Differential", "Differential Mux" },
+
+	{ "Right Line Mux", "Line 1", "RINPUT1" },
+	{ "Right Line Mux", "Line 2", "RINPUT2" },
+	{ "Right Line Mux", "PGA", "Right PGA Mux" },
+	{ "Right Line Mux", "Differential", "Differential Mux" },
+
+	{ "Left PGA Mux", "Line 1", "LINPUT1" },
+	{ "Left PGA Mux", "Line 2", "LINPUT2" },
+	{ "Left PGA Mux", "Differential", "Differential Mux" },
+
+	{ "Right PGA Mux", "Line 1", "RINPUT1" },
+	{ "Right PGA Mux", "Line 2", "RINPUT2" },
+	{ "Right PGA Mux", "Differential", "Differential Mux" },
+
+	{ "Differential Mux", "Line 1", "LINPUT1" },
+	{ "Differential Mux", "Line 1", "RINPUT1" },
+	{ "Differential Mux", "Line 2", "LINPUT2" },
+	{ "Differential Mux", "Line 2", "RINPUT2" },
+
+	{ "Left ADC Mux", "Stereo", "Left PGA Mux" },
+	{ "Left ADC Mux", "Mono (Left)", "Left PGA Mux" },
+	{ "Left ADC Mux", "Digital Mono", "Left PGA Mux" },
+
+	{ "Right ADC Mux", "Stereo", "Right PGA Mux" },
+	{ "Right ADC Mux", "Mono (Right)", "Right PGA Mux" },
+	{ "Right ADC Mux", "Digital Mono", "Right PGA Mux" },
+
+	{ "Left ADC", NULL, "Left ADC Mux" },
+	{ "Right ADC", NULL, "Right ADC Mux" },
+
+	{ "Left Line Mux", "Line 1", "LINPUT1" },
+	{ "Left Line Mux", "Line 2", "LINPUT2" },
+	{ "Left Line Mux", "PGA", "Left PGA Mux" },
+	{ "Left Line Mux", "Differential", "Differential Mux" },
+
+	{ "Right Line Mux", "Line 1", "RINPUT1" },
+	{ "Right Line Mux", "Line 2", "RINPUT2" },
+	{ "Right Line Mux", "PGA", "Right PGA Mux" },
+	{ "Right Line Mux", "Differential", "Differential Mux" },
+
+	{ "Left Mixer", "Playback Switch", "Left DAC" },
+	{ "Left Mixer", "Left Bypass Switch", "Left Line Mux" },
+	{ "Left Mixer", "Right Playback Switch", "Right DAC" },
+	{ "Left Mixer", "Right Bypass Switch", "Right Line Mux" },
+
+	{ "Right Mixer", "Left Playback Switch", "Left DAC" },
+	{ "Right Mixer", "Left Bypass Switch", "Left Line Mux" },
+	{ "Right Mixer", "Playback Switch", "Right DAC" },
+	{ "Right Mixer", "Right Bypass Switch", "Right Line Mux" },
+
+	{ "Left Out 1", NULL, "Left Mixer" },
+	{ "LOUT1", NULL, "Left Out 1" },
+	{ "Right Out 1", NULL, "Right Mixer" },
+	{ "ROUT1", NULL, "Right Out 1" },
+
+	{ "Left Out 2", NULL, "Left Mixer" },
+	{ "LOUT2", NULL, "Left Out 2" },
+	{ "Right Out 2", NULL, "Right Mixer" },
+	{ "ROUT2", NULL, "Right Out 2" },
+};
+
+struct _coeff_div {
+	u32 mclk;
+	u32 rate;
+	u16 fs;
+	u8 sr:5;
+	u8 usb:1;
+};
+
+/* codec hifi mclk clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+	/* 8k */
+	{12288000, 8000, 1536, 0x6, 0x0},
+	{11289600, 8000, 1408, 0x16, 0x0},
+	{18432000, 8000, 2304, 0x7, 0x0},
+	{16934400, 8000, 2112, 0x17, 0x0},
+	{12000000, 8000, 1500, 0x6, 0x1},
+
+	/* 11.025k */
+	{11289600, 11025, 1024, 0x18, 0x0},
+	{16934400, 11025, 1536, 0x19, 0x0},
+	{12000000, 11025, 1088, 0x19, 0x1},
+
+	/* 16k */
+	{12288000, 16000, 768, 0xa, 0x0},
+	{18432000, 16000, 1152, 0xb, 0x0},
+	{12000000, 16000, 750, 0xa, 0x1},
+
+	/* 22.05k */
+	{11289600, 22050, 512, 0x1a, 0x0},
+	{16934400, 22050, 768, 0x1b, 0x0},
+	{12000000, 22050, 544, 0x1b, 0x1},
+
+	/* 32k */
+	{12288000, 32000, 384, 0xc, 0x0},
+	{18432000, 32000, 576, 0xd, 0x0},
+	{12000000, 32000, 375, 0xa, 0x1},
+
+	/* 44.1k */
+	{11289600, 44100, 256, 0x10, 0x0},
+	{16934400, 44100, 384, 0x11, 0x0},
+	{12000000, 44100, 272, 0x11, 0x1},
+
+	/* 48k */
+	{12288000, 48000, 256, 0x0, 0x0},
+	{18432000, 48000, 384, 0x1, 0x0},
+	{12000000, 48000, 250, 0x0, 0x1},
+
+	/* 88.2k */
+	{11289600, 88200, 128, 0x1e, 0x0},
+	{16934400, 88200, 192, 0x1f, 0x0},
+	{12000000, 88200, 136, 0x1f, 0x1},
+
+	/* 96k */
+	{12288000, 96000, 128, 0xe, 0x0},
+	{18432000, 96000, 192, 0xf, 0x0},
+	{12000000, 96000, 125, 0xe, 0x1},
+};
+
+static inline int get_coeff(int mclk, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+		if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/* The set of rates we can generate from the above for each SYSCLK */
+
+static unsigned int rates_12288[] = {
+	8000, 12000, 16000, 24000, 24000, 32000, 48000, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12288 = {
+	.count	= ARRAY_SIZE(rates_12288),
+	.list	= rates_12288,
+};
+
+static unsigned int rates_112896[] = {
+	8000, 11025, 22050, 44100,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_112896 = {
+	.count	= ARRAY_SIZE(rates_112896),
+	.list	= rates_112896,
+};
+
+static unsigned int rates_12[] = {
+	8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000,
+	48000, 88235, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_12 = {
+	.count	= ARRAY_SIZE(rates_12),
+	.list	= rates_12,
+};
+
+/*
+ * Note that this should be called from init rather than from hw_params.
+ */
+static int wm8988_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 18432000:
+	case 22579200:
+	case 36864000:
+		wm8988->sysclk_constraints = &constraints_112896;
+		wm8988->sysclk = freq;
+		return 0;
+
+	case 12288000:
+	case 16934400:
+	case 24576000:
+	case 33868800:
+		wm8988->sysclk_constraints = &constraints_12288;
+		wm8988->sysclk = freq;
+		return 0;
+
+	case 12000000:
+	case 24000000:
+		wm8988->sysclk_constraints = &constraints_12;
+		wm8988->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8988_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface = 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8988_write(codec, WM8988_IFACE, iface);
+	return 0;
+}
+
+static int wm8988_pcm_startup(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+
+	/* The set of sample rates that can be supported depends on the
+	 * MCLK supplied to the CODEC - enforce this.
+	 */
+	if (!wm8988->sysclk) {
+		dev_err(codec->dev,
+			"No MCLK configured, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_RATE,
+				   wm8988->sysclk_constraints);
+
+	return 0;
+}
+
+static int wm8988_pcm_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8988_priv *wm8988 = codec->private_data;
+	u16 iface = wm8988_read_reg_cache(codec, WM8988_IFACE) & 0x1f3;
+	u16 srate = wm8988_read_reg_cache(codec, WM8988_SRATE) & 0x180;
+	int coeff;
+
+	coeff = get_coeff(wm8988->sysclk, params_rate(params));
+	if (coeff < 0) {
+		coeff = get_coeff(wm8988->sysclk / 2, params_rate(params));
+		srate |= 0x40;
+	}
+	if (coeff < 0) {
+		dev_err(codec->dev,
+			"Unable to configure sample rate %dHz with %dHz MCLK\n",
+			params_rate(params), wm8988->sysclk);
+		return coeff;
+	}
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= 0x000c;
+		break;
+	}
+
+	/* set iface & srate */
+	wm8988_write(codec, WM8988_IFACE, iface);
+	if (coeff >= 0)
+		wm8988_write(codec, WM8988_SRATE, srate |
+			(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
+
+	return 0;
+}
+
+static int wm8988_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8988_read_reg_cache(codec, WM8988_ADCDAC) & 0xfff7;
+
+	if (mute)
+		wm8988_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
+	else
+		wm8988_write(codec, WM8988_ADCDAC, mute_reg);
+	return 0;
+}
+
+static int wm8988_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 pwr_reg = wm8988_read_reg_cache(codec, WM8988_PWR1) & ~0x1c1;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VREF, VMID=2x50k, digital enabled */
+		wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* VREF, VMID=2x5k */
+			wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
+
+			/* Charge caps */
+			msleep(100);
+		}
+
+		/* VREF, VMID=2*500k, digital stopped */
+		wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		wm8988_write(codec, WM8988_PWR1, 0x0000);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8988_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8988_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8988_ops = {
+	.startup = wm8988_pcm_startup,
+	.hw_params = wm8988_pcm_hw_params,
+	.set_fmt = wm8988_set_dai_fmt,
+	.set_sysclk = wm8988_set_dai_sysclk,
+	.digital_mute = wm8988_mute,
+};
+
+struct snd_soc_dai wm8988_dai = {
+	.name = "WM8988",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8988_RATES,
+		.formats = WM8988_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8988_RATES,
+		.formats = WM8988_FORMATS,
+	 },
+	.ops = &wm8988_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8988_dai);
+
+static int wm8988_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8988_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8988_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < WM8988_NUM_REG; i++) {
+		if (i == WM8988_RESET)
+			continue;
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+
+static struct snd_soc_codec *wm8988_codec;
+
+static int wm8988_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8988_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8988_codec;
+	codec = wm8988_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8988_snd_controls,
+				ARRAY_SIZE(wm8988_snd_controls));
+	snd_soc_dapm_new_controls(codec, wm8988_dapm_widgets,
+				  ARRAY_SIZE(wm8988_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm8988_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8988 = {
+	.probe = 	wm8988_probe,
+	.remove = 	wm8988_remove,
+	.suspend = 	wm8988_suspend,
+	.resume =	wm8988_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988);
+
+static int wm8988_register(struct wm8988_priv *wm8988)
+{
+	struct snd_soc_codec *codec = &wm8988->codec;
+	int ret;
+	u16 reg;
+
+	if (wm8988_codec) {
+		dev_err(codec->dev, "Another WM8988 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8988;
+	codec->name = "WM8988";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8988_read_reg_cache;
+	codec->write = wm8988_write;
+	codec->dai = &wm8988_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache);
+	codec->reg_cache = &wm8988->reg_cache;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8988_set_bias_level;
+
+	memcpy(codec->reg_cache, wm8988_reg,
+	       sizeof(wm8988_reg));
+
+	ret = wm8988_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	/* set the update bits (we always update left then right) */
+	reg = wm8988_read_reg_cache(codec, WM8988_RADC);
+	wm8988_write(codec, WM8988_RADC, reg | 0x100);
+	reg = wm8988_read_reg_cache(codec, WM8988_RDAC);
+	wm8988_write(codec, WM8988_RDAC, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_ROUT1V);
+	wm8988_write(codec, WM8988_ROUT1V, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_ROUT2V);
+	wm8988_write(codec, WM8988_ROUT2V, reg | 0x0100);
+	reg = wm8988_read_reg_cache(codec, WM8988_RINVOL);
+	wm8988_write(codec, WM8988_RINVOL, reg | 0x0100);
+
+	wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY);
+
+	wm8988_dai.dev = codec->dev;
+
+	wm8988_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8988_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err:
+	kfree(wm8988);
+	return ret;
+}
+
+static void wm8988_unregister(struct wm8988_priv *wm8988)
+{
+	wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8988_dai);
+	snd_soc_unregister_codec(&wm8988->codec);
+	kfree(wm8988);
+	wm8988_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static int wm8988_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8988_priv *wm8988;
+	struct snd_soc_codec *codec;
+
+	wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
+	if (wm8988 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8988->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8988);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8988_register(wm8988);
+}
+
+static int wm8988_i2c_remove(struct i2c_client *client)
+{
+	struct wm8988_priv *wm8988 = i2c_get_clientdata(client);
+	wm8988_unregister(wm8988);
+	return 0;
+}
+
+static const struct i2c_device_id wm8988_i2c_id[] = {
+	{ "wm8988", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8988_i2c_id);
+
+static struct i2c_driver wm8988_i2c_driver = {
+	.driver = {
+		.name = "WM8988",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm8988_i2c_probe,
+	.remove = wm8988_i2c_remove,
+	.id_table = wm8988_i2c_id,
+};
+#endif
+
+#if defined(CONFIG_SPI_MASTER)
+static int wm8988_spi_write(struct spi_device *spi, const char *data, int len)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	u8 msg[2];
+
+	if (len <= 0)
+		return 0;
+
+	msg[0] = data[0];
+	msg[1] = data[1];
+
+	spi_message_init(&m);
+	memset(&t, 0, (sizeof t));
+
+	t.tx_buf = &msg[0];
+	t.len = len;
+
+	spi_message_add_tail(&t, &m);
+	spi_sync(spi, &m);
+
+	return len;
+}
+
+static int __devinit wm8988_spi_probe(struct spi_device *spi)
+{
+	struct wm8988_priv *wm8988;
+	struct snd_soc_codec *codec;
+
+	wm8988 = kzalloc(sizeof(struct wm8988_priv), GFP_KERNEL);
+	if (wm8988 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8988->codec;
+	codec->hw_write = (hw_write_t)wm8988_spi_write;
+	codec->control_data = spi;
+	codec->dev = &spi->dev;
+
+	spi->dev.driver_data = wm8988;
+
+	return wm8988_register(wm8988);
+}
+
+static int __devexit wm8988_spi_remove(struct spi_device *spi)
+{
+	struct wm8988_priv *wm8988 = spi->dev.driver_data;
+
+	wm8988_unregister(wm8988);
+
+	return 0;
+}
+
+static struct spi_driver wm8988_spi_driver = {
+	.driver = {
+		.name	= "wm8988",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm8988_spi_probe,
+	.remove		= __devexit_p(wm8988_spi_remove),
+};
+#endif
+
+static int __init wm8988_modinit(void)
+{
+	int ret;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8988_i2c_driver);
+	if (ret != 0)
+		pr_err("WM8988: Unable to register I2C driver: %d\n", ret);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	ret = spi_register_driver(&wm8988_spi_driver);
+	if (ret != 0)
+		pr_err("WM8988: Unable to register SPI driver: %d\n", ret);
+#endif
+	return ret;
+}
+module_init(wm8988_modinit);
+
+static void __exit wm8988_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8988_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8988_spi_driver);
+#endif
+}
+module_exit(wm8988_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8988 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8988.h b/sound/soc/codecs/wm8988.h
new file mode 100644
index 00000000000..4552d37fdd4
--- /dev/null
+++ b/sound/soc/codecs/wm8988.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <richard@openedhand.com>
+ *
+ * Based on WM8753.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _WM8988_H
+#define _WM8988_H
+
+/* WM8988 register space */
+
+#define WM8988_LINVOL    0x00
+#define WM8988_RINVOL    0x01
+#define WM8988_LOUT1V    0x02
+#define WM8988_ROUT1V    0x03
+#define WM8988_ADCDAC    0x05
+#define WM8988_IFACE     0x07
+#define WM8988_SRATE     0x08
+#define WM8988_LDAC      0x0a
+#define WM8988_RDAC      0x0b
+#define WM8988_BASS      0x0c
+#define WM8988_TREBLE    0x0d
+#define WM8988_RESET     0x0f
+#define WM8988_3D        0x10
+#define WM8988_ALC1      0x11
+#define WM8988_ALC2      0x12
+#define WM8988_ALC3      0x13
+#define WM8988_NGATE     0x14
+#define WM8988_LADC      0x15
+#define WM8988_RADC      0x16
+#define WM8988_ADCTL1    0x17
+#define WM8988_ADCTL2    0x18
+#define WM8988_PWR1      0x19
+#define WM8988_PWR2      0x1a
+#define WM8988_ADCTL3    0x1b
+#define WM8988_ADCIN     0x1f
+#define WM8988_LADCIN    0x20
+#define WM8988_RADCIN    0x21
+#define WM8988_LOUTM1    0x22
+#define WM8988_LOUTM2    0x23
+#define WM8988_ROUTM1    0x24
+#define WM8988_ROUTM2    0x25
+#define WM8988_LOUT2V    0x28
+#define WM8988_ROUT2V    0x29
+#define WM8988_LPPB      0x43
+#define WM8988_NUM_REG   0x44
+
+#define WM8988_SYSCLK	0
+
+extern struct snd_soc_dai wm8988_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8988;
+
+#endif
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 40cd274eb1e..d029818350e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -998,7 +998,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target,
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
-		"WM8990 N value outwith recommended range! N = %d\n", Ndiv);
+		"WM8990 N value outwith recommended range! N = %u\n", Ndiv);
 
 	pll_div->n = Ndiv;
 	Nmod = target % source;
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
new file mode 100644
index 00000000000..86fc57e25f9
--- /dev/null
+++ b/sound/soc/codecs/wm9081.c
@@ -0,0 +1,1534 @@
+/*
+ * wm9081.c  --  WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/wm9081.h>
+#include "wm9081.h"
+
+static u16 wm9081_reg_defaults[] = {
+	0x0000,     /* R0  - Software Reset */
+	0x0000,     /* R1 */
+	0x00B9,     /* R2  - Analogue Lineout */
+	0x00B9,     /* R3  - Analogue Speaker PGA */
+	0x0001,     /* R4  - VMID Control */
+	0x0068,     /* R5  - Bias Control 1 */
+	0x0000,     /* R6 */
+	0x0000,     /* R7  - Analogue Mixer */
+	0x0000,     /* R8  - Anti Pop Control */
+	0x01DB,     /* R9  - Analogue Speaker 1 */
+	0x0018,     /* R10 - Analogue Speaker 2 */
+	0x0180,     /* R11 - Power Management */
+	0x0000,     /* R12 - Clock Control 1 */
+	0x0038,     /* R13 - Clock Control 2 */
+	0x4000,     /* R14 - Clock Control 3 */
+	0x0000,     /* R15 */
+	0x0000,     /* R16 - FLL Control 1 */
+	0x0200,     /* R17 - FLL Control 2 */
+	0x0000,     /* R18 - FLL Control 3 */
+	0x0204,     /* R19 - FLL Control 4 */
+	0x0000,     /* R20 - FLL Control 5 */
+	0x0000,     /* R21 */
+	0x0000,     /* R22 - Audio Interface 1 */
+	0x0002,     /* R23 - Audio Interface 2 */
+	0x0008,     /* R24 - Audio Interface 3 */
+	0x0022,     /* R25 - Audio Interface 4 */
+	0x0000,     /* R26 - Interrupt Status */
+	0x0006,     /* R27 - Interrupt Status Mask */
+	0x0000,     /* R28 - Interrupt Polarity */
+	0x0000,     /* R29 - Interrupt Control */
+	0x00C0,     /* R30 - DAC Digital 1 */
+	0x0008,     /* R31 - DAC Digital 2 */
+	0x09AF,     /* R32 - DRC 1 */
+	0x4201,     /* R33 - DRC 2 */
+	0x0000,     /* R34 - DRC 3 */
+	0x0000,     /* R35 - DRC 4 */
+	0x0000,     /* R36 */
+	0x0000,     /* R37 */
+	0x0000,     /* R38 - Write Sequencer 1 */
+	0x0000,     /* R39 - Write Sequencer 2 */
+	0x0002,     /* R40 - MW Slave 1 */
+	0x0000,     /* R41 */
+	0x0000,     /* R42 - EQ 1 */
+	0x0000,     /* R43 - EQ 2 */
+	0x0FCA,     /* R44 - EQ 3 */
+	0x0400,     /* R45 - EQ 4 */
+	0x00B8,     /* R46 - EQ 5 */
+	0x1EB5,     /* R47 - EQ 6 */
+	0xF145,     /* R48 - EQ 7 */
+	0x0B75,     /* R49 - EQ 8 */
+	0x01C5,     /* R50 - EQ 9 */
+	0x169E,     /* R51 - EQ 10 */
+	0xF829,     /* R52 - EQ 11 */
+	0x07AD,     /* R53 - EQ 12 */
+	0x1103,     /* R54 - EQ 13 */
+	0x1C58,     /* R55 - EQ 14 */
+	0xF373,     /* R56 - EQ 15 */
+	0x0A54,     /* R57 - EQ 16 */
+	0x0558,     /* R58 - EQ 17 */
+	0x0564,     /* R59 - EQ 18 */
+	0x0559,     /* R60 - EQ 19 */
+	0x4000,     /* R61 - EQ 20 */
+};
+
+static struct {
+	int ratio;
+	int clk_sys_rate;
+} clk_sys_rates[] = {
+	{ 64,   0 },
+	{ 128,  1 },
+	{ 192,  2 },
+	{ 256,  3 },
+	{ 384,  4 },
+	{ 512,  5 },
+	{ 768,  6 },
+	{ 1024, 7 },
+	{ 1408, 8 },
+	{ 1536, 9 },
+};
+
+static struct {
+	int rate;
+	int sample_rate;
+} sample_rates[] = {
+	{ 8000,  0  },
+	{ 11025, 1  },
+	{ 12000, 2  },
+	{ 16000, 3  },
+	{ 22050, 4  },
+	{ 24000, 5  },
+	{ 32000, 6  },
+	{ 44100, 7  },
+	{ 48000, 8  },
+	{ 88200, 9  },
+	{ 96000, 10 },
+};
+
+static struct {
+	int div; /* *10 due to .5s */
+	int bclk_div;
+} bclk_divs[] = {
+	{ 10,  0  },
+	{ 15,  1  },
+	{ 20,  2  },
+	{ 30,  3  },
+	{ 40,  4  },
+	{ 50,  5  },
+	{ 55,  6  },
+	{ 60,  7  },
+	{ 80,  8  },
+	{ 100, 9  },
+	{ 110, 10 },
+	{ 120, 11 },
+	{ 160, 12 },
+	{ 200, 13 },
+	{ 220, 14 },
+	{ 240, 15 },
+	{ 250, 16 },
+	{ 300, 17 },
+	{ 320, 18 },
+	{ 440, 19 },
+	{ 480, 20 },
+};
+
+struct wm9081_priv {
+	struct snd_soc_codec codec;
+	u16 reg_cache[WM9081_MAX_REGISTER + 1];
+	int sysclk_source;
+	int mclk_rate;
+	int sysclk_rate;
+	int fs;
+	int bclk;
+	int master;
+	int fll_fref;
+	int fll_fout;
+	struct wm9081_retune_mobile_config *retune;
+};
+
+static int wm9081_reg_is_volatile(int reg)
+{
+	switch (reg) {
+	default:
+		return 0;
+	}
+}
+
+static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec,
+					  unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+	return cache[reg];
+}
+
+static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg)
+{
+	struct i2c_msg xfer[2];
+	u16 data;
+	int ret;
+	struct i2c_client *client = codec->control_data;
+
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 1;
+	xfer[0].buf = &reg;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = 2;
+	xfer[1].buf = (u8 *)&data;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret != 2) {
+		dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+		return 0;
+	}
+
+	return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg)
+{
+	if (wm9081_reg_is_volatile(reg))
+		return wm9081_read_hw(codec, reg);
+	else
+		return wm9081_read_reg_cache(codec, reg);
+}
+
+static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	u8 data[3];
+
+	BUG_ON(reg > WM9081_MAX_REGISTER);
+
+	if (!wm9081_reg_is_volatile(reg))
+		cache[reg] = value;
+
+	data[0] = reg;
+	data[1] = value >> 8;
+	data[2] = value & 0x00ff;
+
+	if (codec->hw_write(codec->control_data, data, 3) == 3)
+		return 0;
+	else
+		return -EIO;
+}
+
+static int wm9081_reset(struct snd_soc_codec *codec)
+{
+	return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static unsigned int drc_max_tlv[] = {
+	TLV_DB_RANGE_HEAD(4),
+	0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
+	1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
+	2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
+	3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
+
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+
+static const char *drc_high_text[] = {
+	"1",
+	"1/2",
+	"1/4",
+	"1/8",
+	"1/16",
+	"0",
+};
+
+static const struct soc_enum drc_high =
+	SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text);
+
+static const char *drc_low_text[] = {
+	"1",
+	"1/2",
+	"1/4",
+	"1/8",
+	"0",
+};
+
+static const struct soc_enum drc_low =
+	SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text);
+
+static const char *drc_atk_text[] = {
+	"181us",
+	"181us",
+	"363us",
+	"726us",
+	"1.45ms",
+	"2.9ms",
+	"5.8ms",
+	"11.6ms",
+	"23.2ms",
+	"46.4ms",
+	"92.8ms",
+	"185.6ms",
+};
+
+static const struct soc_enum drc_atk =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text);
+
+static const char *drc_dcy_text[] = {
+	"186ms",
+	"372ms",
+	"743ms",
+	"1.49s",
+	"2.97s",
+	"5.94s",
+	"11.89s",
+	"23.78s",
+	"47.56s",
+};
+
+static const struct soc_enum drc_dcy =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text);
+
+static const char *drc_qr_dcy_text[] = {
+	"0.725ms",
+	"1.45ms",
+	"5.8ms",
+};
+
+static const struct soc_enum drc_qr_dcy =
+	SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text);
+
+static const char *dac_deemph_text[] = {
+	"None",
+	"32kHz",
+	"44.1kHz",
+	"48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+	SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text);
+
+static const char *speaker_mode_text[] = {
+	"Class D",
+	"Class AB",
+};
+
+static const struct soc_enum speaker_mode =
+	SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text);
+
+static int speaker_mode_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int reg;
+
+	reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+	if (reg & WM9081_SPK_MODE)
+		ucontrol->value.integer.value[0] = 1;
+	else
+		ucontrol->value.integer.value[0] = 0;
+
+	return 0;
+}
+
+/*
+ * Stop any attempts to change speaker mode while the speaker is enabled.
+ *
+ * We also have some special anti-pop controls dependant on speaker
+ * mode which must be changed along with the mode.
+ */
+static int speaker_mode_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+	unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+
+	/* Are we changing anything? */
+	if (ucontrol->value.integer.value[0] ==
+	    ((reg2 & WM9081_SPK_MODE) != 0))
+		return 0;
+
+	/* Don't try to change modes while enabled */
+	if (reg_pwr & WM9081_SPK_ENA)
+		return -EINVAL;
+
+	if (ucontrol->value.integer.value[0]) {
+		/* Class AB */
+		reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
+		reg2 |= WM9081_SPK_MODE;
+	} else {
+		/* Class D */
+		reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
+		reg2 &= ~WM9081_SPK_MODE;
+	}
+
+	wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new wm9081_snd_controls[] = {
+SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
+SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
+
+SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
+
+SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
+SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
+SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
+
+SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
+SOC_ENUM("DRC High Slope", drc_high),
+SOC_ENUM("DRC Low Slope", drc_low),
+SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
+SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
+SOC_ENUM("DRC Attack", drc_atk),
+SOC_ENUM("DRC Decay", drc_dcy),
+SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
+SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
+
+SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
+SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
+SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
+	       out_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
+};
+
+static const struct snd_kcontrol_new wm9081_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
+};
+
+static const struct snd_kcontrol_new mixer[] = {
+SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
+SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
+};
+
+static int speaker_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		reg |= WM9081_SPK_ENA;
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		reg &= ~WM9081_SPK_ENA;
+		break;
+	}
+
+	wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg);
+
+	return 0;
+}
+
+struct _fll_div {
+	u16 fll_fratio;
+	u16 fll_outdiv;
+	u16 fll_clk_ref_div;
+	u16 n;
+	u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+	unsigned int min;
+	unsigned int max;
+	u16 fll_fratio;
+	int ratio;
+} fll_fratios[] = {
+	{       0,    64000, 4, 16 },
+	{   64000,   128000, 3,  8 },
+	{  128000,   256000, 2,  4 },
+	{  256000,  1000000, 1,  2 },
+	{ 1000000, 13500000, 0,  1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+		       unsigned int Fout)
+{
+	u64 Kpart;
+	unsigned int K, Ndiv, Nmod, target;
+	unsigned int div;
+	int i;
+
+	/* Fref must be <=13.5MHz */
+	div = 1;
+	while ((Fref / div) > 13500000) {
+		div *= 2;
+
+		if (div > 8) {
+			pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+			       Fref);
+			return -EINVAL;
+		}
+	}
+	fll_div->fll_clk_ref_div = div / 2;
+
+	pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+	/* Apply the division for our remaining calculations */
+	Fref /= div;
+
+	/* Fvco should be 90-100MHz; don't check the upper bound */
+	div = 0;
+	target = Fout * 2;
+	while (target < 90000000) {
+		div++;
+		target *= 2;
+		if (div > 7) {
+			pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+			       Fout);
+			return -EINVAL;
+		}
+	}
+	fll_div->fll_outdiv = div;
+
+	pr_debug("Fvco=%dHz\n", target);
+
+	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+			target /= fll_fratios[i].ratio;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(fll_fratios)) {
+		pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+		return -EINVAL;
+	}
+
+	/* Now, calculate N.K */
+	Ndiv = target / Fref;
+
+	fll_div->n = Ndiv;
+	Nmod = target % Fref;
+	pr_debug("Nmod=%d\n", Nmod);
+
+	/* Calculate fractional part - scale up so we can round. */
+	Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, Fref);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	fll_div->k = K / 10;
+
+	pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+		 fll_div->n, fll_div->k,
+		 fll_div->fll_fratio, fll_div->fll_outdiv,
+		 fll_div->fll_clk_ref_div);
+
+	return 0;
+}
+
+static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id,
+			  unsigned int Fref, unsigned int Fout)
+{
+	struct wm9081_priv *wm9081 = codec->private_data;
+	u16 reg1, reg4, reg5;
+	struct _fll_div fll_div;
+	int ret;
+	int clk_sys_reg;
+
+	/* Any change? */
+	if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
+		return 0;
+
+	/* Disable the FLL */
+	if (Fout == 0) {
+		dev_dbg(codec->dev, "FLL disabled\n");
+		wm9081->fll_fref = 0;
+		wm9081->fll_fout = 0;
+
+		return 0;
+	}
+
+	ret = fll_factors(&fll_div, Fref, Fout);
+	if (ret != 0)
+		return ret;
+
+	reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5);
+	reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
+
+	switch (fll_id) {
+	case WM9081_SYSCLK_FLL_MCLK:
+		reg5 |= 0x1;
+		break;
+
+	default:
+		dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+		return -EINVAL;
+	}
+
+	/* Disable CLK_SYS while we reconfigure */
+	clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+	if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+		wm9081_write(codec, WM9081_CLOCK_CONTROL_3,
+			     clk_sys_reg & ~WM9081_CLK_SYS_ENA);
+
+	/* Any FLL configuration change requires that the FLL be
+	 * disabled first. */
+	reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1);
+	reg1 &= ~WM9081_FLL_ENA;
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+
+	/* Apply the configuration */
+	if (fll_div.k)
+		reg1 |= WM9081_FLL_FRAC_MASK;
+	else
+		reg1 &= ~WM9081_FLL_FRAC_MASK;
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+
+	wm9081_write(codec, WM9081_FLL_CONTROL_2,
+		     (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
+		     (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
+	wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
+
+	reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4);
+	reg4 &= ~WM9081_FLL_N_MASK;
+	reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
+	wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4);
+
+	reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
+	reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
+	wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5);
+
+	/* Enable the FLL */
+	wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
+
+	/* Then bring CLK_SYS up again if it was disabled */
+	if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+		wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
+
+	dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+	wm9081->fll_fref = Fref;
+	wm9081->fll_fout = Fout;
+
+	return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+	struct wm9081_priv *wm9081 = codec->private_data;
+	int new_sysclk, i, target;
+	unsigned int reg;
+	int ret = 0;
+	int mclkdiv = 0;
+	int fll = 0;
+
+	switch (wm9081->sysclk_source) {
+	case WM9081_SYSCLK_MCLK:
+		if (wm9081->mclk_rate > 12225000) {
+			mclkdiv = 1;
+			wm9081->sysclk_rate = wm9081->mclk_rate / 2;
+		} else {
+			wm9081->sysclk_rate = wm9081->mclk_rate;
+		}
+		wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0);
+		break;
+
+	case WM9081_SYSCLK_FLL_MCLK:
+		/* If we have a sample rate calculate a CLK_SYS that
+		 * gives us a suitable DAC configuration, plus BCLK.
+		 * Ideally we would check to see if we can clock
+		 * directly from MCLK and only use the FLL if this is
+		 * not the case, though care must be taken with free
+		 * running mode.
+		 */
+		if (wm9081->master && wm9081->bclk) {
+			/* Make sure we can generate CLK_SYS and BCLK
+			 * and that we've got 3MHz for optimal
+			 * performance. */
+			for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+				target = wm9081->fs * clk_sys_rates[i].ratio;
+				new_sysclk = target;
+				if (target >= wm9081->bclk &&
+				    target > 3000000)
+					break;
+			}
+		} else if (wm9081->fs) {
+			for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+				new_sysclk = clk_sys_rates[i].ratio
+					* wm9081->fs;
+				if (new_sysclk > 3000000)
+					break;
+			}
+		} else {
+			new_sysclk = 12288000;
+		}
+
+		ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK,
+				     wm9081->mclk_rate, new_sysclk);
+		if (ret == 0) {
+			wm9081->sysclk_rate = new_sysclk;
+
+			/* Switch SYSCLK over to FLL */
+			fll = 1;
+		} else {
+			wm9081->sysclk_rate = wm9081->mclk_rate;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1);
+	if (mclkdiv)
+		reg |= WM9081_MCLKDIV2;
+	else
+		reg &= ~WM9081_MCLKDIV2;
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg);
+
+	reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+	if (fll)
+		reg |= WM9081_CLK_SRC_SEL;
+	else
+		reg &= ~WM9081_CLK_SRC_SEL;
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg);
+
+	dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
+
+	return ret;
+}
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+
+	/* This should be done on init() for bypass paths */
+	switch (wm9081->sysclk_source) {
+	case WM9081_SYSCLK_MCLK:
+		dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
+		break;
+	case WM9081_SYSCLK_FLL_MCLK:
+		dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n",
+			wm9081->mclk_rate);
+		break;
+	default:
+		dev_err(codec->dev, "System clock not configured\n");
+		return -EINVAL;
+	}
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		configure_clock(codec);
+		break;
+
+	case SND_SOC_DAPM_POST_PMD:
+		/* Disable the FLL if it's running */
+		wm9081_set_fll(codec, 0, 0, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1"),
+SND_SOC_DAPM_INPUT("IN2"),
+
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0),
+
+SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
+			     mixer, ARRAY_SIZE(mixer)),
+
+SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0,
+		   speaker_event,
+		   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_OUTPUT("LINEOUT"),
+SND_SOC_DAPM_OUTPUT("SPKN"),
+SND_SOC_DAPM_OUTPUT("SPKP"),
+
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
+};
+
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+	{ "DAC", NULL, "CLK_SYS" },
+	{ "DAC", NULL, "CLK_DSP" },
+
+	{ "Mixer", "IN1 Switch", "IN1" },
+	{ "Mixer", "IN2 Switch", "IN2" },
+	{ "Mixer", "Playback Switch", "DAC" },
+
+	{ "LINEOUT PGA", NULL, "Mixer" },
+	{ "LINEOUT PGA", NULL, "TOCLK" },
+	{ "LINEOUT PGA", NULL, "CLK_SYS" },
+
+	{ "LINEOUT", NULL, "LINEOUT PGA" },
+
+	{ "Speaker PGA", NULL, "Mixer" },
+	{ "Speaker PGA", NULL, "TOCLK" },
+	{ "Speaker PGA", NULL, "CLK_SYS" },
+
+	{ "SPKN", NULL, "Speaker PGA" },
+	{ "SPKP", NULL, "Speaker PGA" },
+};
+
+static int wm9081_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VMID=2*40k */
+		reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+		reg &= ~WM9081_VMID_SEL_MASK;
+		reg |= 0x2;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Normal bias current */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg &= ~WM9081_STBY_BIAS_ENA;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		/* Initial cold start */
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* Disable LINEOUT discharge */
+			reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+			reg &= ~WM9081_LINEOUT_DISCH;
+			wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+
+			/* Select startup bias source */
+			reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+			reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
+			wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+
+			/* VMID 2*4k; Soft VMID ramp enable */
+			reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+			reg |= WM9081_VMID_RAMP | 0x6;
+			wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+			mdelay(100);
+
+			/* Normal bias enable & soft start off */
+			reg |= WM9081_BIAS_ENA;
+			reg &= ~WM9081_VMID_RAMP;
+			wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+			/* Standard bias source */
+			reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+			reg &= ~WM9081_BIAS_SRC;
+			wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		}
+
+		/* VMID 2*240k */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg &= ~WM9081_VMID_SEL_MASK;
+		reg |= 0x40;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Standby bias current on */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg |= WM9081_STBY_BIAS_ENA;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Startup bias source */
+		reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+		reg |= WM9081_BIAS_SRC;
+		wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+
+		/* Disable VMID and biases with soft ramping */
+		reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+		reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
+		reg |= WM9081_VMID_RAMP;
+		wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+
+		/* Actively discharge LINEOUT */
+		reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+		reg |= WM9081_LINEOUT_DISCH;
+		wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+	unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+
+	aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
+		  WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		wm9081->master = 0;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		aif2 |= WM9081_LRCLK_DIR;
+		wm9081->master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		aif2 |= WM9081_BCLK_DIR;
+		wm9081->master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
+		wm9081->master = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_B:
+		aif2 |= WM9081_AIF_LRCLK_INV;
+	case SND_SOC_DAIFMT_DSP_A:
+		aif2 |= 0x3;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif2 |= 0x2;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif2 |= 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif2 |= WM9081_AIF_BCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif2 |= WM9081_AIF_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif2 |= WM9081_AIF_LRCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+
+	return 0;
+}
+
+static int wm9081_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+	int ret, i, best, best_val, cur_val;
+	unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
+
+	clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2);
+	clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
+
+	aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+
+	aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+	aif2 &= ~WM9081_AIF_WL_MASK;
+
+	aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3);
+	aif3 &= ~WM9081_BCLK_DIV_MASK;
+
+	aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4);
+	aif4 &= ~WM9081_LRCLK_RATE_MASK;
+
+	/* What BCLK do we need? */
+	wm9081->fs = params_rate(params);
+	wm9081->bclk = 2 * wm9081->fs;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		wm9081->bclk *= 16;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		wm9081->bclk *= 20;
+		aif2 |= 0x4;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		wm9081->bclk *= 24;
+		aif2 |= 0x8;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		wm9081->bclk *= 32;
+		aif2 |= 0xc;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) {
+		int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
+			     WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
+		wm9081->bclk *= slots;
+	}
+
+	dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
+
+	ret = configure_clock(codec);
+	if (ret != 0)
+		return ret;
+
+	/* Select nearest CLK_SYS_RATE */
+	best = 0;
+	best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
+		       - wm9081->fs);
+	for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+		cur_val = abs((wm9081->sysclk_rate /
+			       clk_sys_rates[i].ratio) - wm9081->fs);;
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+		clk_sys_rates[best].ratio);
+	clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
+		      << WM9081_CLK_SYS_RATE_SHIFT);
+
+	/* SAMPLE_RATE */
+	best = 0;
+	best_val = abs(wm9081->fs - sample_rates[0].rate);
+	for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+		/* Closest match */
+		cur_val = abs(wm9081->fs - sample_rates[i].rate);
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+		sample_rates[best].rate);
+	clk_ctrl2 |= (sample_rates[best].sample_rate
+			<< WM9081_SAMPLE_RATE_SHIFT);
+
+	/* BCLK_DIV */
+	best = 0;
+	best_val = INT_MAX;
+	for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+		cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
+			- wm9081->bclk;
+		if (cur_val < 0) /* Table is sorted */
+			break;
+		if (cur_val < best_val) {
+			best = i;
+			best_val = cur_val;
+		}
+	}
+	wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
+	dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+		bclk_divs[best].div, wm9081->bclk);
+	aif3 |= bclk_divs[best].bclk_div;
+
+	/* LRCLK is a simple fraction of BCLK */
+	dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
+	aif4 |= wm9081->bclk / wm9081->fs;
+
+	/* Apply a ReTune Mobile configuration if it's in use */
+	if (wm9081->retune) {
+		struct wm9081_retune_mobile_config *retune = wm9081->retune;
+		struct wm9081_retune_mobile_setting *s;
+		int eq1;
+
+		best = 0;
+		best_val = abs(retune->configs[0].rate - wm9081->fs);
+		for (i = 0; i < retune->num_configs; i++) {
+			cur_val = abs(retune->configs[i].rate - wm9081->fs);
+			if (cur_val < best_val) {
+				best_val = cur_val;
+				best = i;
+			}
+		}
+		s = &retune->configs[best];
+
+		dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
+			s->name, s->rate);
+
+		/* If the EQ is enabled then disable it while we write out */
+		eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
+		if (eq1 & WM9081_EQ_ENA)
+			wm9081_write(codec, WM9081_EQ_1, 0);
+
+		/* Write out the other values */
+		for (i = 1; i < ARRAY_SIZE(s->config); i++)
+			wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]);
+
+		eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
+		wm9081_write(codec, WM9081_EQ_1, eq1);
+	}
+
+	wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
+
+	return 0;
+}
+
+static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int reg;
+
+	reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2);
+
+	if (mute)
+		reg |= WM9081_DAC_MUTE;
+	else
+		reg &= ~WM9081_DAC_MUTE;
+
+	wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg);
+
+	return 0;
+}
+
+static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai,
+			     int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm9081_priv *wm9081 = codec->private_data;
+
+	switch (clk_id) {
+	case WM9081_SYSCLK_MCLK:
+	case WM9081_SYSCLK_FLL_MCLK:
+		wm9081->sysclk_source = clk_id;
+		wm9081->mclk_rate = freq;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
+			       unsigned int mask, int slots)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+
+	aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
+
+	if (slots < 1 || slots > 4)
+		return -EINVAL;
+
+	aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
+
+	switch (mask) {
+	case 1:
+		break;
+	case 2:
+		aif1 |= 0x10;
+		break;
+	case 4:
+		aif1 |= 0x20;
+		break;
+	case 8:
+		aif1 |= 0x30;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
+
+	return 0;
+}
+
+#define WM9081_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM9081_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm9081_dai_ops = {
+	.hw_params = wm9081_hw_params,
+	.set_sysclk = wm9081_set_sysclk,
+	.set_fmt = wm9081_set_dai_fmt,
+	.digital_mute = wm9081_digital_mute,
+	.set_tdm_slot = wm9081_set_tdm_slot,
+};
+
+/* We report two channels because the CODEC processes a stereo signal, even
+ * though it is only capable of handling a mono output.
+ */
+struct snd_soc_dai wm9081_dai = {
+	.name = "WM9081",
+	.playback = {
+		.stream_name = "HiFi Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM9081_RATES,
+		.formats = WM9081_FORMATS,
+	},
+	.ops = &wm9081_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm9081_dai);
+
+
+static struct snd_soc_codec *wm9081_codec;
+
+static int wm9081_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	struct wm9081_priv *wm9081;
+	int ret = 0;
+
+	if (wm9081_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm9081_codec;
+	codec = wm9081_codec;
+	wm9081 = codec->private_data;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm9081_snd_controls,
+			     ARRAY_SIZE(wm9081_snd_controls));
+	if (!wm9081->retune) {
+		dev_dbg(codec->dev,
+			"No ReTune Mobile data, using normal EQ\n");
+		snd_soc_add_controls(codec, wm9081_eq_controls,
+				     ARRAY_SIZE(wm9081_eq_controls));
+	}
+
+	snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets,
+				  ARRAY_SIZE(wm9081_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_soc_init_card(socdev);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to register card: %d\n", ret);
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	return ret;
+}
+
+static int wm9081_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm9081_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int wm9081_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 *reg_cache = codec->reg_cache;
+	int i;
+
+	for (i = 0; i < codec->reg_cache_size; i++) {
+		if (i == WM9081_SOFTWARE_RESET)
+			continue;
+
+		wm9081_write(codec, i, reg_cache[i]);
+	}
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+#else
+#define wm9081_suspend NULL
+#define wm9081_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_wm9081 = {
+	.probe = 	wm9081_probe,
+	.remove = 	wm9081_remove,
+	.suspend =	wm9081_suspend,
+	.resume =	wm9081_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
+
+static int wm9081_register(struct wm9081_priv *wm9081)
+{
+	struct snd_soc_codec *codec = &wm9081->codec;
+	int ret;
+	u16 reg;
+
+	if (wm9081_codec) {
+		dev_err(codec->dev, "Another WM9081 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm9081;
+	codec->name = "WM9081";
+	codec->owner = THIS_MODULE;
+	codec->read = wm9081_read;
+	codec->write = wm9081_write;
+	codec->dai = &wm9081_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
+	codec->reg_cache = &wm9081->reg_cache;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm9081_set_bias_level;
+
+	memcpy(codec->reg_cache, wm9081_reg_defaults,
+	       sizeof(wm9081_reg_defaults));
+
+	reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET);
+	if (reg != 0x9081) {
+		dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = wm9081_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		return ret;
+	}
+
+	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Enable zero cross by default */
+	reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT);
+	wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
+	reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
+	wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+		     reg | WM9081_SPKPGAZC);
+
+	wm9081_dai.dev = codec->dev;
+
+	wm9081_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm9081_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err:
+	kfree(wm9081);
+	return ret;
+}
+
+static void wm9081_unregister(struct wm9081_priv *wm9081)
+{
+	wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm9081_dai);
+	snd_soc_unregister_codec(&wm9081->codec);
+	kfree(wm9081);
+	wm9081_codec = NULL;
+}
+
+static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm9081_priv *wm9081;
+	struct snd_soc_codec *codec;
+
+	wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL);
+	if (wm9081 == NULL)
+		return -ENOMEM;
+
+	codec = &wm9081->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	wm9081->retune = i2c->dev.platform_data;
+
+	i2c_set_clientdata(i2c, wm9081);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm9081_register(wm9081);
+}
+
+static __devexit int wm9081_i2c_remove(struct i2c_client *client)
+{
+	struct wm9081_priv *wm9081 = i2c_get_clientdata(client);
+	wm9081_unregister(wm9081);
+	return 0;
+}
+
+static const struct i2c_device_id wm9081_i2c_id[] = {
+	{ "wm9081", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
+
+static struct i2c_driver wm9081_i2c_driver = {
+	.driver = {
+		.name = "wm9081",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm9081_i2c_probe,
+	.remove =   __devexit_p(wm9081_i2c_remove),
+	.id_table = wm9081_i2c_id,
+};
+
+static int __init wm9081_modinit(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm9081_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
+		       ret);
+	}
+
+	return ret;
+}
+module_init(wm9081_modinit);
+
+static void __exit wm9081_exit(void)
+{
+	i2c_del_driver(&wm9081_i2c_driver);
+}
+module_exit(wm9081_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM9081 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm9081.h b/sound/soc/codecs/wm9081.h
new file mode 100644
index 00000000000..42d3bc75702
--- /dev/null
+++ b/sound/soc/codecs/wm9081.h
@@ -0,0 +1,787 @@
+#ifndef WM9081_H
+#define WM9081_H
+
+/*
+ * wm9081.c  --  WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <sound/soc.h>
+
+extern struct snd_soc_dai wm9081_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm9081;
+
+/*
+ * SYSCLK sources
+ */
+#define WM9081_SYSCLK_MCLK      1   /* Use MCLK without FLL */
+#define WM9081_SYSCLK_FLL_MCLK  2   /* Use MCLK, enabling FLL if required */
+
+/*
+ * Register values.
+ */
+#define WM9081_SOFTWARE_RESET                   0x00
+#define WM9081_ANALOGUE_LINEOUT                 0x02
+#define WM9081_ANALOGUE_SPEAKER_PGA             0x03
+#define WM9081_VMID_CONTROL                     0x04
+#define WM9081_BIAS_CONTROL_1                   0x05
+#define WM9081_ANALOGUE_MIXER                   0x07
+#define WM9081_ANTI_POP_CONTROL                 0x08
+#define WM9081_ANALOGUE_SPEAKER_1               0x09
+#define WM9081_ANALOGUE_SPEAKER_2               0x0A
+#define WM9081_POWER_MANAGEMENT                 0x0B
+#define WM9081_CLOCK_CONTROL_1                  0x0C
+#define WM9081_CLOCK_CONTROL_2                  0x0D
+#define WM9081_CLOCK_CONTROL_3                  0x0E
+#define WM9081_FLL_CONTROL_1                    0x10
+#define WM9081_FLL_CONTROL_2                    0x11
+#define WM9081_FLL_CONTROL_3                    0x12
+#define WM9081_FLL_CONTROL_4                    0x13
+#define WM9081_FLL_CONTROL_5                    0x14
+#define WM9081_AUDIO_INTERFACE_1                0x16
+#define WM9081_AUDIO_INTERFACE_2                0x17
+#define WM9081_AUDIO_INTERFACE_3                0x18
+#define WM9081_AUDIO_INTERFACE_4                0x19
+#define WM9081_INTERRUPT_STATUS                 0x1A
+#define WM9081_INTERRUPT_STATUS_MASK            0x1B
+#define WM9081_INTERRUPT_POLARITY               0x1C
+#define WM9081_INTERRUPT_CONTROL                0x1D
+#define WM9081_DAC_DIGITAL_1                    0x1E
+#define WM9081_DAC_DIGITAL_2                    0x1F
+#define WM9081_DRC_1                            0x20
+#define WM9081_DRC_2                            0x21
+#define WM9081_DRC_3                            0x22
+#define WM9081_DRC_4                            0x23
+#define WM9081_WRITE_SEQUENCER_1                0x26
+#define WM9081_WRITE_SEQUENCER_2                0x27
+#define WM9081_MW_SLAVE_1                       0x28
+#define WM9081_EQ_1                             0x2A
+#define WM9081_EQ_2                             0x2B
+#define WM9081_EQ_3                             0x2C
+#define WM9081_EQ_4                             0x2D
+#define WM9081_EQ_5                             0x2E
+#define WM9081_EQ_6                             0x2F
+#define WM9081_EQ_7                             0x30
+#define WM9081_EQ_8                             0x31
+#define WM9081_EQ_9                             0x32
+#define WM9081_EQ_10                            0x33
+#define WM9081_EQ_11                            0x34
+#define WM9081_EQ_12                            0x35
+#define WM9081_EQ_13                            0x36
+#define WM9081_EQ_14                            0x37
+#define WM9081_EQ_15                            0x38
+#define WM9081_EQ_16                            0x39
+#define WM9081_EQ_17                            0x3A
+#define WM9081_EQ_18                            0x3B
+#define WM9081_EQ_19                            0x3C
+#define WM9081_EQ_20                            0x3D
+
+#define WM9081_REGISTER_COUNT                   55
+#define WM9081_MAX_REGISTER                     0x3D
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+#define WM9081_SW_RST_DEV_ID1_MASK              0xFFFF  /* SW_RST_DEV_ID1 - [15:0] */
+#define WM9081_SW_RST_DEV_ID1_SHIFT                  0  /* SW_RST_DEV_ID1 - [15:0] */
+#define WM9081_SW_RST_DEV_ID1_WIDTH                 16  /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R2 (0x02) - Analogue Lineout
+ */
+#define WM9081_LINEOUT_MUTE                     0x0080  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_MASK                0x0080  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_SHIFT                    7  /* LINEOUT_MUTE */
+#define WM9081_LINEOUT_MUTE_WIDTH                    1  /* LINEOUT_MUTE */
+#define WM9081_LINEOUTZC                        0x0040  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_MASK                   0x0040  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_SHIFT                       6  /* LINEOUTZC */
+#define WM9081_LINEOUTZC_WIDTH                       1  /* LINEOUTZC */
+#define WM9081_LINEOUT_VOL_MASK                 0x003F  /* LINEOUT_VOL - [5:0] */
+#define WM9081_LINEOUT_VOL_SHIFT                     0  /* LINEOUT_VOL - [5:0] */
+#define WM9081_LINEOUT_VOL_WIDTH                     6  /* LINEOUT_VOL - [5:0] */
+
+/*
+ * R3 (0x03) - Analogue Speaker PGA
+ */
+#define WM9081_SPKPGA_MUTE                      0x0080  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_MASK                 0x0080  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_SHIFT                     7  /* SPKPGA_MUTE */
+#define WM9081_SPKPGA_MUTE_WIDTH                     1  /* SPKPGA_MUTE */
+#define WM9081_SPKPGAZC                         0x0040  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_MASK                    0x0040  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_SHIFT                        6  /* SPKPGAZC */
+#define WM9081_SPKPGAZC_WIDTH                        1  /* SPKPGAZC */
+#define WM9081_SPKPGA_VOL_MASK                  0x003F  /* SPKPGA_VOL - [5:0] */
+#define WM9081_SPKPGA_VOL_SHIFT                      0  /* SPKPGA_VOL - [5:0] */
+#define WM9081_SPKPGA_VOL_WIDTH                      6  /* SPKPGA_VOL - [5:0] */
+
+/*
+ * R4 (0x04) - VMID Control
+ */
+#define WM9081_VMID_BUF_ENA                     0x0020  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_MASK                0x0020  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_SHIFT                    5  /* VMID_BUF_ENA */
+#define WM9081_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
+#define WM9081_VMID_RAMP                        0x0008  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_MASK                   0x0008  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_SHIFT                       3  /* VMID_RAMP */
+#define WM9081_VMID_RAMP_WIDTH                       1  /* VMID_RAMP */
+#define WM9081_VMID_SEL_MASK                    0x0006  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_SEL_SHIFT                        1  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_SEL_WIDTH                        2  /* VMID_SEL - [2:1] */
+#define WM9081_VMID_FAST_ST                     0x0001  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_MASK                0x0001  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_SHIFT                    0  /* VMID_FAST_ST */
+#define WM9081_VMID_FAST_ST_WIDTH                    1  /* VMID_FAST_ST */
+
+/*
+ * R5 (0x05) - Bias Control 1
+ */
+#define WM9081_BIAS_SRC                         0x0040  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_MASK                    0x0040  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_SHIFT                        6  /* BIAS_SRC */
+#define WM9081_BIAS_SRC_WIDTH                        1  /* BIAS_SRC */
+#define WM9081_STBY_BIAS_LVL                    0x0020  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_MASK               0x0020  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_SHIFT                   5  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_LVL_WIDTH                   1  /* STBY_BIAS_LVL */
+#define WM9081_STBY_BIAS_ENA                    0x0010  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_MASK               0x0010  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_SHIFT                   4  /* STBY_BIAS_ENA */
+#define WM9081_STBY_BIAS_ENA_WIDTH                   1  /* STBY_BIAS_ENA */
+#define WM9081_BIAS_LVL_MASK                    0x000C  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_LVL_SHIFT                        2  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_LVL_WIDTH                        2  /* BIAS_LVL - [3:2] */
+#define WM9081_BIAS_ENA                         0x0002  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_MASK                    0x0002  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_SHIFT                        1  /* BIAS_ENA */
+#define WM9081_BIAS_ENA_WIDTH                        1  /* BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA                 0x0001  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_MASK            0x0001  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_SHIFT                0  /* STARTUP_BIAS_ENA */
+#define WM9081_STARTUP_BIAS_ENA_WIDTH                1  /* STARTUP_BIAS_ENA */
+
+/*
+ * R7 (0x07) - Analogue Mixer
+ */
+#define WM9081_DAC_SEL                          0x0010  /* DAC_SEL */
+#define WM9081_DAC_SEL_MASK                     0x0010  /* DAC_SEL */
+#define WM9081_DAC_SEL_SHIFT                         4  /* DAC_SEL */
+#define WM9081_DAC_SEL_WIDTH                         1  /* DAC_SEL */
+#define WM9081_IN2_VOL                          0x0008  /* IN2_VOL */
+#define WM9081_IN2_VOL_MASK                     0x0008  /* IN2_VOL */
+#define WM9081_IN2_VOL_SHIFT                         3  /* IN2_VOL */
+#define WM9081_IN2_VOL_WIDTH                         1  /* IN2_VOL */
+#define WM9081_IN2_ENA                          0x0004  /* IN2_ENA */
+#define WM9081_IN2_ENA_MASK                     0x0004  /* IN2_ENA */
+#define WM9081_IN2_ENA_SHIFT                         2  /* IN2_ENA */
+#define WM9081_IN2_ENA_WIDTH                         1  /* IN2_ENA */
+#define WM9081_IN1_VOL                          0x0002  /* IN1_VOL */
+#define WM9081_IN1_VOL_MASK                     0x0002  /* IN1_VOL */
+#define WM9081_IN1_VOL_SHIFT                         1  /* IN1_VOL */
+#define WM9081_IN1_VOL_WIDTH                         1  /* IN1_VOL */
+#define WM9081_IN1_ENA                          0x0001  /* IN1_ENA */
+#define WM9081_IN1_ENA_MASK                     0x0001  /* IN1_ENA */
+#define WM9081_IN1_ENA_SHIFT                         0  /* IN1_ENA */
+#define WM9081_IN1_ENA_WIDTH                         1  /* IN1_ENA */
+
+/*
+ * R8 (0x08) - Anti Pop Control
+ */
+#define WM9081_LINEOUT_DISCH                    0x0004  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_MASK               0x0004  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_SHIFT                   2  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_DISCH_WIDTH                   1  /* LINEOUT_DISCH */
+#define WM9081_LINEOUT_VROI                     0x0002  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_MASK                0x0002  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_SHIFT                    1  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_VROI_WIDTH                    1  /* LINEOUT_VROI */
+#define WM9081_LINEOUT_CLAMP                    0x0001  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_MASK               0x0001  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_SHIFT                   0  /* LINEOUT_CLAMP */
+#define WM9081_LINEOUT_CLAMP_WIDTH                   1  /* LINEOUT_CLAMP */
+
+/*
+ * R9 (0x09) - Analogue Speaker 1
+ */
+#define WM9081_SPK_DCGAIN_MASK                  0x0038  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_DCGAIN_SHIFT                      3  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_DCGAIN_WIDTH                      3  /* SPK_DCGAIN - [5:3] */
+#define WM9081_SPK_ACGAIN_MASK                  0x0007  /* SPK_ACGAIN - [2:0] */
+#define WM9081_SPK_ACGAIN_SHIFT                      0  /* SPK_ACGAIN - [2:0] */
+#define WM9081_SPK_ACGAIN_WIDTH                      3  /* SPK_ACGAIN - [2:0] */
+
+/*
+ * R10 (0x0A) - Analogue Speaker 2
+ */
+#define WM9081_SPK_MODE                         0x0040  /* SPK_MODE */
+#define WM9081_SPK_MODE_MASK                    0x0040  /* SPK_MODE */
+#define WM9081_SPK_MODE_SHIFT                        6  /* SPK_MODE */
+#define WM9081_SPK_MODE_WIDTH                        1  /* SPK_MODE */
+#define WM9081_SPK_INV_MUTE                     0x0010  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_MASK                0x0010  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_SHIFT                    4  /* SPK_INV_MUTE */
+#define WM9081_SPK_INV_MUTE_WIDTH                    1  /* SPK_INV_MUTE */
+#define WM9081_OUT_SPK_CTRL                     0x0008  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_MASK                0x0008  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_SHIFT                    3  /* OUT_SPK_CTRL */
+#define WM9081_OUT_SPK_CTRL_WIDTH                    1  /* OUT_SPK_CTRL */
+
+/*
+ * R11 (0x0B) - Power Management
+ */
+#define WM9081_TSHUT_ENA                        0x0100  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_MASK                   0x0100  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_SHIFT                       8  /* TSHUT_ENA */
+#define WM9081_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
+#define WM9081_TSENSE_ENA                       0x0080  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_MASK                  0x0080  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_SHIFT                      7  /* TSENSE_ENA */
+#define WM9081_TSENSE_ENA_WIDTH                      1  /* TSENSE_ENA */
+#define WM9081_TEMP_SHUT                        0x0040  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_MASK                   0x0040  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_SHIFT                       6  /* TEMP_SHUT */
+#define WM9081_TEMP_SHUT_WIDTH                       1  /* TEMP_SHUT */
+#define WM9081_LINEOUT_ENA                      0x0010  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_MASK                 0x0010  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_SHIFT                     4  /* LINEOUT_ENA */
+#define WM9081_LINEOUT_ENA_WIDTH                     1  /* LINEOUT_ENA */
+#define WM9081_SPKPGA_ENA                       0x0004  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_MASK                  0x0004  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_SHIFT                      2  /* SPKPGA_ENA */
+#define WM9081_SPKPGA_ENA_WIDTH                      1  /* SPKPGA_ENA */
+#define WM9081_SPK_ENA                          0x0002  /* SPK_ENA */
+#define WM9081_SPK_ENA_MASK                     0x0002  /* SPK_ENA */
+#define WM9081_SPK_ENA_SHIFT                         1  /* SPK_ENA */
+#define WM9081_SPK_ENA_WIDTH                         1  /* SPK_ENA */
+#define WM9081_DAC_ENA                          0x0001  /* DAC_ENA */
+#define WM9081_DAC_ENA_MASK                     0x0001  /* DAC_ENA */
+#define WM9081_DAC_ENA_SHIFT                         0  /* DAC_ENA */
+#define WM9081_DAC_ENA_WIDTH                         1  /* DAC_ENA */
+
+/*
+ * R12 (0x0C) - Clock Control 1
+ */
+#define WM9081_CLK_OP_DIV_MASK                  0x1C00  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_OP_DIV_SHIFT                     10  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_OP_DIV_WIDTH                      3  /* CLK_OP_DIV - [12:10] */
+#define WM9081_CLK_TO_DIV_MASK                  0x0300  /* CLK_TO_DIV - [9:8] */
+#define WM9081_CLK_TO_DIV_SHIFT                      8  /* CLK_TO_DIV - [9:8] */
+#define WM9081_CLK_TO_DIV_WIDTH                      2  /* CLK_TO_DIV - [9:8] */
+#define WM9081_MCLKDIV2                         0x0080  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_MASK                    0x0080  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_SHIFT                        7  /* MCLKDIV2 */
+#define WM9081_MCLKDIV2_WIDTH                        1  /* MCLKDIV2 */
+
+/*
+ * R13 (0x0D) - Clock Control 2
+ */
+#define WM9081_CLK_SYS_RATE_MASK                0x00F0  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_CLK_SYS_RATE_SHIFT                    4  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_CLK_SYS_RATE_WIDTH                    4  /* CLK_SYS_RATE - [7:4] */
+#define WM9081_SAMPLE_RATE_MASK                 0x000F  /* SAMPLE_RATE - [3:0] */
+#define WM9081_SAMPLE_RATE_SHIFT                     0  /* SAMPLE_RATE - [3:0] */
+#define WM9081_SAMPLE_RATE_WIDTH                     4  /* SAMPLE_RATE - [3:0] */
+
+/*
+ * R14 (0x0E) - Clock Control 3
+ */
+#define WM9081_CLK_SRC_SEL                      0x2000  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_MASK                 0x2000  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_SHIFT                    13  /* CLK_SRC_SEL */
+#define WM9081_CLK_SRC_SEL_WIDTH                     1  /* CLK_SRC_SEL */
+#define WM9081_CLK_OP_ENA                       0x0020  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_MASK                  0x0020  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_SHIFT                      5  /* CLK_OP_ENA */
+#define WM9081_CLK_OP_ENA_WIDTH                      1  /* CLK_OP_ENA */
+#define WM9081_CLK_TO_ENA                       0x0004  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_MASK                  0x0004  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_SHIFT                      2  /* CLK_TO_ENA */
+#define WM9081_CLK_TO_ENA_WIDTH                      1  /* CLK_TO_ENA */
+#define WM9081_CLK_DSP_ENA                      0x0002  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_MASK                 0x0002  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_SHIFT                     1  /* CLK_DSP_ENA */
+#define WM9081_CLK_DSP_ENA_WIDTH                     1  /* CLK_DSP_ENA */
+#define WM9081_CLK_SYS_ENA                      0x0001  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_MASK                 0x0001  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_SHIFT                     0  /* CLK_SYS_ENA */
+#define WM9081_CLK_SYS_ENA_WIDTH                     1  /* CLK_SYS_ENA */
+
+/*
+ * R16 (0x10) - FLL Control 1
+ */
+#define WM9081_FLL_HOLD                         0x0008  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_MASK                    0x0008  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_SHIFT                        3  /* FLL_HOLD */
+#define WM9081_FLL_HOLD_WIDTH                        1  /* FLL_HOLD */
+#define WM9081_FLL_FRAC                         0x0004  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_MASK                    0x0004  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_SHIFT                        2  /* FLL_FRAC */
+#define WM9081_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
+#define WM9081_FLL_ENA                          0x0001  /* FLL_ENA */
+#define WM9081_FLL_ENA_MASK                     0x0001  /* FLL_ENA */
+#define WM9081_FLL_ENA_SHIFT                         0  /* FLL_ENA */
+#define WM9081_FLL_ENA_WIDTH                         1  /* FLL_ENA */
+
+/*
+ * R17 (0x11) - FLL Control 2
+ */
+#define WM9081_FLL_OUTDIV_MASK                  0x0700  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_OUTDIV_SHIFT                      8  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_OUTDIV_WIDTH                      3  /* FLL_OUTDIV - [10:8] */
+#define WM9081_FLL_CTRL_RATE_MASK               0x0070  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_CTRL_RATE_SHIFT                   4  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [6:4] */
+#define WM9081_FLL_FRATIO_MASK                  0x0007  /* FLL_FRATIO - [2:0] */
+#define WM9081_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [2:0] */
+#define WM9081_FLL_FRATIO_WIDTH                      3  /* FLL_FRATIO - [2:0] */
+
+/*
+ * R18 (0x12) - FLL Control 3
+ */
+#define WM9081_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
+#define WM9081_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
+#define WM9081_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
+
+/*
+ * R19 (0x13) - FLL Control 4
+ */
+#define WM9081_FLL_N_MASK                       0x7FE0  /* FLL_N - [14:5] */
+#define WM9081_FLL_N_SHIFT                           5  /* FLL_N - [14:5] */
+#define WM9081_FLL_N_WIDTH                          10  /* FLL_N - [14:5] */
+#define WM9081_FLL_GAIN_MASK                    0x000F  /* FLL_GAIN - [3:0] */
+#define WM9081_FLL_GAIN_SHIFT                        0  /* FLL_GAIN - [3:0] */
+#define WM9081_FLL_GAIN_WIDTH                        4  /* FLL_GAIN - [3:0] */
+
+/*
+ * R20 (0x14) - FLL Control 5
+ */
+#define WM9081_FLL_CLK_REF_DIV_MASK             0x0018  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_REF_DIV_SHIFT                 3  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_REF_DIV_WIDTH                 2  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM9081_FLL_CLK_SRC_MASK                 0x0003  /* FLL_CLK_SRC - [1:0] */
+#define WM9081_FLL_CLK_SRC_SHIFT                     0  /* FLL_CLK_SRC - [1:0] */
+#define WM9081_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [1:0] */
+
+/*
+ * R22 (0x16) - Audio Interface 1
+ */
+#define WM9081_AIFDAC_CHAN                      0x0040  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_MASK                 0x0040  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_SHIFT                     6  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_CHAN_WIDTH                     1  /* AIFDAC_CHAN */
+#define WM9081_AIFDAC_TDM_SLOT_MASK             0x0030  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_SLOT_SHIFT                 4  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_SLOT_WIDTH                 2  /* AIFDAC_TDM_SLOT - [5:4] */
+#define WM9081_AIFDAC_TDM_MODE_MASK             0x000C  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_AIFDAC_TDM_MODE_SHIFT                 2  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_AIFDAC_TDM_MODE_WIDTH                 2  /* AIFDAC_TDM_MODE - [3:2] */
+#define WM9081_DAC_COMP                         0x0002  /* DAC_COMP */
+#define WM9081_DAC_COMP_MASK                    0x0002  /* DAC_COMP */
+#define WM9081_DAC_COMP_SHIFT                        1  /* DAC_COMP */
+#define WM9081_DAC_COMP_WIDTH                        1  /* DAC_COMP */
+#define WM9081_DAC_COMPMODE                     0x0001  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_MASK                0x0001  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_SHIFT                    0  /* DAC_COMPMODE */
+#define WM9081_DAC_COMPMODE_WIDTH                    1  /* DAC_COMPMODE */
+
+/*
+ * R23 (0x17) - Audio Interface 2
+ */
+#define WM9081_AIF_TRIS                         0x0200  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_MASK                    0x0200  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_SHIFT                        9  /* AIF_TRIS */
+#define WM9081_AIF_TRIS_WIDTH                        1  /* AIF_TRIS */
+#define WM9081_DAC_DAT_INV                      0x0100  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_MASK                 0x0100  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_SHIFT                     8  /* DAC_DAT_INV */
+#define WM9081_DAC_DAT_INV_WIDTH                     1  /* DAC_DAT_INV */
+#define WM9081_AIF_BCLK_INV                     0x0080  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_MASK                0x0080  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_SHIFT                    7  /* AIF_BCLK_INV */
+#define WM9081_AIF_BCLK_INV_WIDTH                    1  /* AIF_BCLK_INV */
+#define WM9081_BCLK_DIR                         0x0040  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_MASK                    0x0040  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_SHIFT                        6  /* BCLK_DIR */
+#define WM9081_BCLK_DIR_WIDTH                        1  /* BCLK_DIR */
+#define WM9081_LRCLK_DIR                        0x0020  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_MASK                   0x0020  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_SHIFT                       5  /* LRCLK_DIR */
+#define WM9081_LRCLK_DIR_WIDTH                       1  /* LRCLK_DIR */
+#define WM9081_AIF_LRCLK_INV                    0x0010  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_MASK               0x0010  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_SHIFT                   4  /* AIF_LRCLK_INV */
+#define WM9081_AIF_LRCLK_INV_WIDTH                   1  /* AIF_LRCLK_INV */
+#define WM9081_AIF_WL_MASK                      0x000C  /* AIF_WL - [3:2] */
+#define WM9081_AIF_WL_SHIFT                          2  /* AIF_WL - [3:2] */
+#define WM9081_AIF_WL_WIDTH                          2  /* AIF_WL - [3:2] */
+#define WM9081_AIF_FMT_MASK                     0x0003  /* AIF_FMT - [1:0] */
+#define WM9081_AIF_FMT_SHIFT                         0  /* AIF_FMT - [1:0] */
+#define WM9081_AIF_FMT_WIDTH                         2  /* AIF_FMT - [1:0] */
+
+/*
+ * R24 (0x18) - Audio Interface 3
+ */
+#define WM9081_BCLK_DIV_MASK                    0x001F  /* BCLK_DIV - [4:0] */
+#define WM9081_BCLK_DIV_SHIFT                        0  /* BCLK_DIV - [4:0] */
+#define WM9081_BCLK_DIV_WIDTH                        5  /* BCLK_DIV - [4:0] */
+
+/*
+ * R25 (0x19) - Audio Interface 4
+ */
+#define WM9081_LRCLK_RATE_MASK                  0x07FF  /* LRCLK_RATE - [10:0] */
+#define WM9081_LRCLK_RATE_SHIFT                      0  /* LRCLK_RATE - [10:0] */
+#define WM9081_LRCLK_RATE_WIDTH                     11  /* LRCLK_RATE - [10:0] */
+
+/*
+ * R26 (0x1A) - Interrupt Status
+ */
+#define WM9081_WSEQ_BUSY_EINT                   0x0004  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_MASK              0x0004  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_SHIFT                  2  /* WSEQ_BUSY_EINT */
+#define WM9081_WSEQ_BUSY_EINT_WIDTH                  1  /* WSEQ_BUSY_EINT */
+#define WM9081_TSHUT_EINT                       0x0001  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_MASK                  0x0001  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_SHIFT                      0  /* TSHUT_EINT */
+#define WM9081_TSHUT_EINT_WIDTH                      1  /* TSHUT_EINT */
+
+/*
+ * R27 (0x1B) - Interrupt Status Mask
+ */
+#define WM9081_IM_WSEQ_BUSY_EINT                0x0004  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_MASK           0x0004  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_SHIFT               2  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_WSEQ_BUSY_EINT_WIDTH               1  /* IM_WSEQ_BUSY_EINT */
+#define WM9081_IM_TSHUT_EINT                    0x0001  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_MASK               0x0001  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_SHIFT                   0  /* IM_TSHUT_EINT */
+#define WM9081_IM_TSHUT_EINT_WIDTH                   1  /* IM_TSHUT_EINT */
+
+/*
+ * R28 (0x1C) - Interrupt Polarity
+ */
+#define WM9081_TSHUT_INV                        0x0001  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_MASK                   0x0001  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_SHIFT                       0  /* TSHUT_INV */
+#define WM9081_TSHUT_INV_WIDTH                       1  /* TSHUT_INV */
+
+/*
+ * R29 (0x1D) - Interrupt Control
+ */
+#define WM9081_IRQ_POL                          0x8000  /* IRQ_POL */
+#define WM9081_IRQ_POL_MASK                     0x8000  /* IRQ_POL */
+#define WM9081_IRQ_POL_SHIFT                        15  /* IRQ_POL */
+#define WM9081_IRQ_POL_WIDTH                         1  /* IRQ_POL */
+#define WM9081_IRQ_OP_CTRL                      0x0001  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_MASK                 0x0001  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_SHIFT                     0  /* IRQ_OP_CTRL */
+#define WM9081_IRQ_OP_CTRL_WIDTH                     1  /* IRQ_OP_CTRL */
+
+/*
+ * R30 (0x1E) - DAC Digital 1
+ */
+#define WM9081_DAC_VOL_MASK                     0x00FF  /* DAC_VOL - [7:0] */
+#define WM9081_DAC_VOL_SHIFT                         0  /* DAC_VOL - [7:0] */
+#define WM9081_DAC_VOL_WIDTH                         8  /* DAC_VOL - [7:0] */
+
+/*
+ * R31 (0x1F) - DAC Digital 2
+ */
+#define WM9081_DAC_MUTERATE                     0x0400  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_MASK                0x0400  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_SHIFT                   10  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
+#define WM9081_DAC_MUTEMODE                     0x0200  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_MASK                0x0200  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_SHIFT                    9  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTEMODE_WIDTH                    1  /* DAC_MUTEMODE */
+#define WM9081_DAC_MUTE                         0x0008  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_MASK                    0x0008  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_SHIFT                        3  /* DAC_MUTE */
+#define WM9081_DAC_MUTE_WIDTH                        1  /* DAC_MUTE */
+#define WM9081_DEEMPH_MASK                      0x0006  /* DEEMPH - [2:1] */
+#define WM9081_DEEMPH_SHIFT                          1  /* DEEMPH - [2:1] */
+#define WM9081_DEEMPH_WIDTH                          2  /* DEEMPH - [2:1] */
+
+/*
+ * R32 (0x20) - DRC 1
+ */
+#define WM9081_DRC_ENA                          0x8000  /* DRC_ENA */
+#define WM9081_DRC_ENA_MASK                     0x8000  /* DRC_ENA */
+#define WM9081_DRC_ENA_SHIFT                        15  /* DRC_ENA */
+#define WM9081_DRC_ENA_WIDTH                         1  /* DRC_ENA */
+#define WM9081_DRC_STARTUP_GAIN_MASK            0x07C0  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_STARTUP_GAIN_SHIFT                6  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_STARTUP_GAIN_WIDTH                5  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM9081_DRC_FF_DLY                       0x0020  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_MASK                  0x0020  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_SHIFT                      5  /* DRC_FF_DLY */
+#define WM9081_DRC_FF_DLY_WIDTH                      1  /* DRC_FF_DLY */
+#define WM9081_DRC_QR                           0x0004  /* DRC_QR */
+#define WM9081_DRC_QR_MASK                      0x0004  /* DRC_QR */
+#define WM9081_DRC_QR_SHIFT                          2  /* DRC_QR */
+#define WM9081_DRC_QR_WIDTH                          1  /* DRC_QR */
+#define WM9081_DRC_ANTICLIP                     0x0002  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_MASK                0x0002  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_SHIFT                    1  /* DRC_ANTICLIP */
+#define WM9081_DRC_ANTICLIP_WIDTH                    1  /* DRC_ANTICLIP */
+
+/*
+ * R33 (0x21) - DRC 2
+ */
+#define WM9081_DRC_ATK_MASK                     0xF000  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_ATK_SHIFT                        12  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_ATK_WIDTH                         4  /* DRC_ATK - [15:12] */
+#define WM9081_DRC_DCY_MASK                     0x0F00  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_DCY_SHIFT                         8  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_DCY_WIDTH                         4  /* DRC_DCY - [11:8] */
+#define WM9081_DRC_QR_THR_MASK                  0x00C0  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_THR_SHIFT                      6  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_THR_WIDTH                      2  /* DRC_QR_THR - [7:6] */
+#define WM9081_DRC_QR_DCY_MASK                  0x0030  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_QR_DCY_SHIFT                      4  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_QR_DCY_WIDTH                      2  /* DRC_QR_DCY - [5:4] */
+#define WM9081_DRC_MINGAIN_MASK                 0x000C  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MINGAIN_SHIFT                     2  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MINGAIN_WIDTH                     2  /* DRC_MINGAIN - [3:2] */
+#define WM9081_DRC_MAXGAIN_MASK                 0x0003  /* DRC_MAXGAIN - [1:0] */
+#define WM9081_DRC_MAXGAIN_SHIFT                     0  /* DRC_MAXGAIN - [1:0] */
+#define WM9081_DRC_MAXGAIN_WIDTH                     2  /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R34 (0x22) - DRC 3
+ */
+#define WM9081_DRC_HI_COMP_MASK                 0x0038  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_HI_COMP_SHIFT                     3  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_HI_COMP_WIDTH                     3  /* DRC_HI_COMP - [5:3] */
+#define WM9081_DRC_LO_COMP_MASK                 0x0007  /* DRC_LO_COMP - [2:0] */
+#define WM9081_DRC_LO_COMP_SHIFT                     0  /* DRC_LO_COMP - [2:0] */
+#define WM9081_DRC_LO_COMP_WIDTH                     3  /* DRC_LO_COMP - [2:0] */
+
+/*
+ * R35 (0x23) - DRC 4
+ */
+#define WM9081_DRC_KNEE_IP_MASK                 0x07E0  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_IP_SHIFT                     5  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_IP_WIDTH                     6  /* DRC_KNEE_IP - [10:5] */
+#define WM9081_DRC_KNEE_OP_MASK                 0x001F  /* DRC_KNEE_OP - [4:0] */
+#define WM9081_DRC_KNEE_OP_SHIFT                     0  /* DRC_KNEE_OP - [4:0] */
+#define WM9081_DRC_KNEE_OP_WIDTH                     5  /* DRC_KNEE_OP - [4:0] */
+
+/*
+ * R38 (0x26) - Write Sequencer 1
+ */
+#define WM9081_WSEQ_ENA                         0x8000  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_MASK                    0x8000  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_SHIFT                       15  /* WSEQ_ENA */
+#define WM9081_WSEQ_ENA_WIDTH                        1  /* WSEQ_ENA */
+#define WM9081_WSEQ_ABORT                       0x0200  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_MASK                  0x0200  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_SHIFT                      9  /* WSEQ_ABORT */
+#define WM9081_WSEQ_ABORT_WIDTH                      1  /* WSEQ_ABORT */
+#define WM9081_WSEQ_START                       0x0100  /* WSEQ_START */
+#define WM9081_WSEQ_START_MASK                  0x0100  /* WSEQ_START */
+#define WM9081_WSEQ_START_SHIFT                      8  /* WSEQ_START */
+#define WM9081_WSEQ_START_WIDTH                      1  /* WSEQ_START */
+#define WM9081_WSEQ_START_INDEX_MASK            0x007F  /* WSEQ_START_INDEX - [6:0] */
+#define WM9081_WSEQ_START_INDEX_SHIFT                0  /* WSEQ_START_INDEX - [6:0] */
+#define WM9081_WSEQ_START_INDEX_WIDTH                7  /* WSEQ_START_INDEX - [6:0] */
+
+/*
+ * R39 (0x27) - Write Sequencer 2
+ */
+#define WM9081_WSEQ_CURRENT_INDEX_MASK          0x07F0  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_CURRENT_INDEX_SHIFT              4  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_CURRENT_INDEX_WIDTH              7  /* WSEQ_CURRENT_INDEX - [10:4] */
+#define WM9081_WSEQ_BUSY                        0x0001  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_MASK                   0x0001  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_SHIFT                       0  /* WSEQ_BUSY */
+#define WM9081_WSEQ_BUSY_WIDTH                       1  /* WSEQ_BUSY */
+
+/*
+ * R40 (0x28) - MW Slave 1
+ */
+#define WM9081_SPI_CFG                          0x0020  /* SPI_CFG */
+#define WM9081_SPI_CFG_MASK                     0x0020  /* SPI_CFG */
+#define WM9081_SPI_CFG_SHIFT                         5  /* SPI_CFG */
+#define WM9081_SPI_CFG_WIDTH                         1  /* SPI_CFG */
+#define WM9081_SPI_4WIRE                        0x0010  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_MASK                   0x0010  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_SHIFT                       4  /* SPI_4WIRE */
+#define WM9081_SPI_4WIRE_WIDTH                       1  /* SPI_4WIRE */
+#define WM9081_ARA_ENA                          0x0008  /* ARA_ENA */
+#define WM9081_ARA_ENA_MASK                     0x0008  /* ARA_ENA */
+#define WM9081_ARA_ENA_SHIFT                         3  /* ARA_ENA */
+#define WM9081_ARA_ENA_WIDTH                         1  /* ARA_ENA */
+#define WM9081_AUTO_INC                         0x0002  /* AUTO_INC */
+#define WM9081_AUTO_INC_MASK                    0x0002  /* AUTO_INC */
+#define WM9081_AUTO_INC_SHIFT                        1  /* AUTO_INC */
+#define WM9081_AUTO_INC_WIDTH                        1  /* AUTO_INC */
+
+/*
+ * R42 (0x2A) - EQ 1
+ */
+#define WM9081_EQ_B1_GAIN_MASK                  0xF800  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B1_GAIN_SHIFT                     11  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B1_GAIN_WIDTH                      5  /* EQ_B1_GAIN - [15:11] */
+#define WM9081_EQ_B2_GAIN_MASK                  0x07C0  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B2_GAIN_SHIFT                      6  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B2_GAIN_WIDTH                      5  /* EQ_B2_GAIN - [10:6] */
+#define WM9081_EQ_B4_GAIN_MASK                  0x003E  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_B4_GAIN_SHIFT                      1  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_B4_GAIN_WIDTH                      5  /* EQ_B4_GAIN - [5:1] */
+#define WM9081_EQ_ENA                           0x0001  /* EQ_ENA */
+#define WM9081_EQ_ENA_MASK                      0x0001  /* EQ_ENA */
+#define WM9081_EQ_ENA_SHIFT                          0  /* EQ_ENA */
+#define WM9081_EQ_ENA_WIDTH                          1  /* EQ_ENA */
+
+/*
+ * R43 (0x2B) - EQ 2
+ */
+#define WM9081_EQ_B3_GAIN_MASK                  0xF800  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B3_GAIN_SHIFT                     11  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B3_GAIN_WIDTH                      5  /* EQ_B3_GAIN - [15:11] */
+#define WM9081_EQ_B5_GAIN_MASK                  0x07C0  /* EQ_B5_GAIN - [10:6] */
+#define WM9081_EQ_B5_GAIN_SHIFT                      6  /* EQ_B5_GAIN - [10:6] */
+#define WM9081_EQ_B5_GAIN_WIDTH                      5  /* EQ_B5_GAIN - [10:6] */
+
+/*
+ * R44 (0x2C) - EQ 3
+ */
+#define WM9081_EQ_B1_A_MASK                     0xFFFF  /* EQ_B1_A - [15:0] */
+#define WM9081_EQ_B1_A_SHIFT                         0  /* EQ_B1_A - [15:0] */
+#define WM9081_EQ_B1_A_WIDTH                        16  /* EQ_B1_A - [15:0] */
+
+/*
+ * R45 (0x2D) - EQ 4
+ */
+#define WM9081_EQ_B1_B_MASK                     0xFFFF  /* EQ_B1_B - [15:0] */
+#define WM9081_EQ_B1_B_SHIFT                         0  /* EQ_B1_B - [15:0] */
+#define WM9081_EQ_B1_B_WIDTH                        16  /* EQ_B1_B - [15:0] */
+
+/*
+ * R46 (0x2E) - EQ 5
+ */
+#define WM9081_EQ_B1_PG_MASK                    0xFFFF  /* EQ_B1_PG - [15:0] */
+#define WM9081_EQ_B1_PG_SHIFT                        0  /* EQ_B1_PG - [15:0] */
+#define WM9081_EQ_B1_PG_WIDTH                       16  /* EQ_B1_PG - [15:0] */
+
+/*
+ * R47 (0x2F) - EQ 6
+ */
+#define WM9081_EQ_B2_A_MASK                     0xFFFF  /* EQ_B2_A - [15:0] */
+#define WM9081_EQ_B2_A_SHIFT                         0  /* EQ_B2_A - [15:0] */
+#define WM9081_EQ_B2_A_WIDTH                        16  /* EQ_B2_A - [15:0] */
+
+/*
+ * R48 (0x30) - EQ 7
+ */
+#define WM9081_EQ_B2_B_MASK                     0xFFFF  /* EQ_B2_B - [15:0] */
+#define WM9081_EQ_B2_B_SHIFT                         0  /* EQ_B2_B - [15:0] */
+#define WM9081_EQ_B2_B_WIDTH                        16  /* EQ_B2_B - [15:0] */
+
+/*
+ * R49 (0x31) - EQ 8
+ */
+#define WM9081_EQ_B2_C_MASK                     0xFFFF  /* EQ_B2_C - [15:0] */
+#define WM9081_EQ_B2_C_SHIFT                         0  /* EQ_B2_C - [15:0] */
+#define WM9081_EQ_B2_C_WIDTH                        16  /* EQ_B2_C - [15:0] */
+
+/*
+ * R50 (0x32) - EQ 9
+ */
+#define WM9081_EQ_B2_PG_MASK                    0xFFFF  /* EQ_B2_PG - [15:0] */
+#define WM9081_EQ_B2_PG_SHIFT                        0  /* EQ_B2_PG - [15:0] */
+#define WM9081_EQ_B2_PG_WIDTH                       16  /* EQ_B2_PG - [15:0] */
+
+/*
+ * R51 (0x33) - EQ 10
+ */
+#define WM9081_EQ_B4_A_MASK                     0xFFFF  /* EQ_B4_A - [15:0] */
+#define WM9081_EQ_B4_A_SHIFT                         0  /* EQ_B4_A - [15:0] */
+#define WM9081_EQ_B4_A_WIDTH                        16  /* EQ_B4_A - [15:0] */
+
+/*
+ * R52 (0x34) - EQ 11
+ */
+#define WM9081_EQ_B4_B_MASK                     0xFFFF  /* EQ_B4_B - [15:0] */
+#define WM9081_EQ_B4_B_SHIFT                         0  /* EQ_B4_B - [15:0] */
+#define WM9081_EQ_B4_B_WIDTH                        16  /* EQ_B4_B - [15:0] */
+
+/*
+ * R53 (0x35) - EQ 12
+ */
+#define WM9081_EQ_B4_C_MASK                     0xFFFF  /* EQ_B4_C - [15:0] */
+#define WM9081_EQ_B4_C_SHIFT                         0  /* EQ_B4_C - [15:0] */
+#define WM9081_EQ_B4_C_WIDTH                        16  /* EQ_B4_C - [15:0] */
+
+/*
+ * R54 (0x36) - EQ 13
+ */
+#define WM9081_EQ_B4_PG_MASK                    0xFFFF  /* EQ_B4_PG - [15:0] */
+#define WM9081_EQ_B4_PG_SHIFT                        0  /* EQ_B4_PG - [15:0] */
+#define WM9081_EQ_B4_PG_WIDTH                       16  /* EQ_B4_PG - [15:0] */
+
+/*
+ * R55 (0x37) - EQ 14
+ */
+#define WM9081_EQ_B3_A_MASK                     0xFFFF  /* EQ_B3_A - [15:0] */
+#define WM9081_EQ_B3_A_SHIFT                         0  /* EQ_B3_A - [15:0] */
+#define WM9081_EQ_B3_A_WIDTH                        16  /* EQ_B3_A - [15:0] */
+
+/*
+ * R56 (0x38) - EQ 15
+ */
+#define WM9081_EQ_B3_B_MASK                     0xFFFF  /* EQ_B3_B - [15:0] */
+#define WM9081_EQ_B3_B_SHIFT                         0  /* EQ_B3_B - [15:0] */
+#define WM9081_EQ_B3_B_WIDTH                        16  /* EQ_B3_B - [15:0] */
+
+/*
+ * R57 (0x39) - EQ 16
+ */
+#define WM9081_EQ_B3_C_MASK                     0xFFFF  /* EQ_B3_C - [15:0] */
+#define WM9081_EQ_B3_C_SHIFT                         0  /* EQ_B3_C - [15:0] */
+#define WM9081_EQ_B3_C_WIDTH                        16  /* EQ_B3_C - [15:0] */
+
+/*
+ * R58 (0x3A) - EQ 17
+ */
+#define WM9081_EQ_B3_PG_MASK                    0xFFFF  /* EQ_B3_PG - [15:0] */
+#define WM9081_EQ_B3_PG_SHIFT                        0  /* EQ_B3_PG - [15:0] */
+#define WM9081_EQ_B3_PG_WIDTH                       16  /* EQ_B3_PG - [15:0] */
+
+/*
+ * R59 (0x3B) - EQ 18
+ */
+#define WM9081_EQ_B5_A_MASK                     0xFFFF  /* EQ_B5_A - [15:0] */
+#define WM9081_EQ_B5_A_SHIFT                         0  /* EQ_B5_A - [15:0] */
+#define WM9081_EQ_B5_A_WIDTH                        16  /* EQ_B5_A - [15:0] */
+
+/*
+ * R60 (0x3C) - EQ 19
+ */
+#define WM9081_EQ_B5_B_MASK                     0xFFFF  /* EQ_B5_B - [15:0] */
+#define WM9081_EQ_B5_B_SHIFT                         0  /* EQ_B5_B - [15:0] */
+#define WM9081_EQ_B5_B_WIDTH                        16  /* EQ_B5_B - [15:0] */
+
+/*
+ * R61 (0x3D) - EQ 20
+ */
+#define WM9081_EQ_B5_PG_MASK                    0xFFFF  /* EQ_B5_PG - [15:0] */
+#define WM9081_EQ_B5_PG_SHIFT                        0  /* EQ_B5_PG - [15:0] */
+#define WM9081_EQ_B5_PG_WIDTH                       16  /* EQ_B5_PG - [15:0] */
+
+
+#endif
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index c2d1a7a18fa..fa88b463e71 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -282,14 +282,14 @@ struct snd_soc_dai wm9705_dai[] = {
 			.channels_min = 1,
 			.channels_max = 2,
 			.rates = WM9705_AC97_RATES,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.formats = SND_SOC_STD_AC97_FMTS,
 		},
 		.capture = {
 			.stream_name = "HiFi Capture",
 			.channels_min = 1,
 			.channels_max = 2,
 			.rates = WM9705_AC97_RATES,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.formats = SND_SOC_STD_AC97_FMTS,
 		},
 		.ops = &wm9705_dai_ops,
 	},
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 765cf1e7369..1fd4e88f50c 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -534,13 +534,13 @@ struct snd_soc_dai wm9712_dai[] = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "HiFi Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9712_dai_ops_hifi,
 },
 {
@@ -550,7 +550,7 @@ struct snd_soc_dai wm9712_dai[] = {
 		.channels_min = 1,
 		.channels_max = 1,
 		.rates = WM9712_AC97_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9712_dai_ops_aux,
 }
 };
@@ -585,6 +585,8 @@ static int wm9712_reset(struct snd_soc_codec *codec, int try_warm)
 	}
 
 	soc_ac97_ops.reset(codec->ac97);
+	if (soc_ac97_ops.warm_reset)
+		soc_ac97_ops.warm_reset(codec->ac97);
 	if (ac97_read(codec, 0) != wm9712_reg[0])
 		goto err;
 	return 0;
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 523bad077fa..abed37acf78 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -189,6 +189,26 @@ SOC_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0),
 SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1),
 };
 
+static int wm9713_voice_shutdown(struct snd_soc_dapm_widget *w,
+				 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 status, rate;
+
+	BUG_ON(event != SND_SOC_DAPM_PRE_PMD);
+
+	/* Gracefully shut down the voice interface. */
+	status = ac97_read(codec, AC97_EXTENDED_MID) | 0x1000;
+	rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF;
+	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200);
+	schedule_timeout_interruptible(msecs_to_jiffies(1));
+	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00);
+	ac97_write(codec, AC97_EXTENDED_MID, status);
+
+	return 0;
+}
+
+
 /* We have to create a fake left and right HP mixers because
  * the codec only has a single control that is shared by both channels.
  * This makes it impossible to determine the audio path using the current
@@ -400,7 +420,8 @@ SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("HP Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
-SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1),
+SND_SOC_DAPM_DAC_E("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1,
+		   wm9713_voice_shutdown, SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1),
 SND_SOC_DAPM_PGA("Left ADC", AC97_EXTENDED_MID, 5, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Right ADC", AC97_EXTENDED_MID, 4, 1, NULL, 0),
@@ -689,7 +710,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
 	Ndiv = target / source;
 	if ((Ndiv < 5) || (Ndiv > 12))
 		printk(KERN_WARNING
-			"WM9713 PLL N value %d out of recommended range!\n",
+			"WM9713 PLL N value %u out of recommended range!\n",
 			Ndiv);
 
 	pll_div->n = Ndiv;
@@ -936,21 +957,6 @@ static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static void wm9713_voiceshutdown(struct snd_pcm_substream *substream,
-				 struct snd_soc_dai *dai)
-{
-	struct snd_soc_codec *codec = dai->codec;
-	u16 status, rate;
-
-	/* Gracefully shut down the voice interface. */
-	status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000;
-	rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF;
-	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200);
-	schedule_timeout_interruptible(msecs_to_jiffies(1));
-	ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00);
-	ac97_write(codec, AC97_EXTENDED_MID, status);
-}
-
 static int ac97_hifi_prepare(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
@@ -1019,7 +1025,6 @@ static struct snd_soc_dai_ops wm9713_dai_ops_aux = {
 
 static struct snd_soc_dai_ops wm9713_dai_ops_voice = {
 	.hw_params	= wm9713_pcm_hw_params,
-	.shutdown	= wm9713_voiceshutdown,
 	.set_clkdiv	= wm9713_set_dai_clkdiv,
 	.set_pll	= wm9713_set_dai_pll,
 	.set_fmt	= wm9713_set_dai_fmt,
@@ -1035,13 +1040,13 @@ struct snd_soc_dai wm9713_dai[] = {
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.capture = {
 		.stream_name = "HiFi Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9713_dai_ops_hifi,
 	},
 	{
@@ -1051,7 +1056,7 @@ struct snd_soc_dai wm9713_dai[] = {
 		.channels_min = 1,
 		.channels_max = 1,
 		.rates = WM9713_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.formats = SND_SOC_STD_AC97_FMTS,},
 	.ops = &wm9713_dai_ops_aux,
 	},
 	{
@@ -1069,6 +1074,7 @@ struct snd_soc_dai wm9713_dai[] = {
 		.rates = WM9713_PCM_RATES,
 		.formats = WM9713_PCM_FORMATS,},
 	.ops = &wm9713_dai_ops_voice,
+	.symmetric_rates = 1,
 	},
 };
 EXPORT_SYMBOL_GPL(wm9713_dai);
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index bd7392c9657..411a710be66 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -10,13 +10,14 @@ config SND_DAVINCI_SOC_I2S
 	tristate
 
 config SND_DAVINCI_SOC_EVM
-	tristate "SoC Audio support for DaVinci EVM"
-	depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM
+	tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+	depends on SND_DAVINCI_SOC
+	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
 	select SND_DAVINCI_SOC_I2S
 	select SND_SOC_TLV320AIC3X
 	help
 	  Say Y if you want to add support for SoC audio on TI
-	  DaVinci EVM platform.
+	  DaVinci DM6446 or DM355 EVM platforms.
 
 config SND_DAVINCI_SOC_SFFSDR
 	tristate "SoC Audio support for SFFSDR"
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 9b90b347007..58fd1cbedd8 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -20,7 +20,11 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/dma.h>
-#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/asp.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
 
 #include "../codecs/tlv320aic3x.h"
 #include "davinci-pcm.h"
@@ -150,7 +154,7 @@ static struct snd_soc_card snd_soc_card_evm = {
 
 /* evm audio private data */
 static struct aic3x_setup_data evm_aic3x_setup = {
-	.i2c_bus = 0,
+	.i2c_bus = 1,
 	.i2c_address = 0x1b,
 };
 
@@ -161,36 +165,73 @@ static struct snd_soc_device evm_snd_devdata = {
 	.codec_data = &evm_aic3x_setup,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
 static struct resource evm_snd_resources[] = {
 	{
-		.start = DAVINCI_MCBSP_BASE,
-		.end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+		.start = DAVINCI_ASP0_BASE,
+		.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
 
 static struct evm_snd_platform_data evm_snd_data = {
-	.tx_dma_ch	= DM644X_DMACH_MCBSP_TX,
-	.rx_dma_ch	= DM644X_DMACH_MCBSP_RX,
+	.tx_dma_ch	= DAVINCI_DMA_ASP0_TX,
+	.rx_dma_ch	= DAVINCI_DMA_ASP0_RX,
+};
+
+/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+static struct resource dm335evm_snd_resources[] = {
+	{
+		.start = DAVINCI_ASP1_BASE,
+		.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct evm_snd_platform_data dm335evm_snd_data = {
+	.tx_dma_ch	= DAVINCI_DMA_ASP1_TX,
+	.rx_dma_ch	= DAVINCI_DMA_ASP1_RX,
 };
 
 static struct platform_device *evm_snd_device;
 
 static int __init evm_init(void)
 {
+	struct resource *resources;
+	unsigned num_resources;
+	struct evm_snd_platform_data *data;
+	int index;
 	int ret;
 
-	evm_snd_device = platform_device_alloc("soc-audio", 0);
+	if (machine_is_davinci_evm()) {
+		davinci_cfg_reg(DM644X_MCBSP);
+
+		resources = evm_snd_resources;
+		num_resources = ARRAY_SIZE(evm_snd_resources);
+		data = &evm_snd_data;
+		index = 0;
+	} else if (machine_is_davinci_dm355_evm()) {
+		/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+		resources = dm335evm_snd_resources;
+		num_resources = ARRAY_SIZE(dm335evm_snd_resources);
+		data = &dm335evm_snd_data;
+		index = 1;
+	} else
+		return -EINVAL;
+
+	evm_snd_device = platform_device_alloc("soc-audio", index);
 	if (!evm_snd_device)
 		return -ENOMEM;
 
 	platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
 	evm_snd_devdata.dev = &evm_snd_device->dev;
-	platform_device_add_data(evm_snd_device, &evm_snd_data,
-				 sizeof(evm_snd_data));
+	platform_device_add_data(evm_snd_device, data, sizeof(*data));
 
-	ret = platform_device_add_resources(evm_snd_device, evm_snd_resources,
-					    ARRAY_SIZE(evm_snd_resources));
+	ret = platform_device_add_resources(evm_snd_device, resources,
+			num_resources);
 	if (ret) {
 		platform_device_put(evm_snd_device);
 		return ret;
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index ffdb9439d3d..b1ea52fc83c 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -24,6 +24,26 @@
 
 #include "davinci-pcm.h"
 
+
+/*
+ * NOTE:  terminology here is confusing.
+ *
+ *  - This driver supports the "Audio Serial Port" (ASP),
+ *    found on dm6446, dm355, and other DaVinci chips.
+ *
+ *  - But it labels it a "Multi-channel Buffered Serial Port"
+ *    (McBSP) as on older chips like the dm642 ... which was
+ *    backward-compatible, possibly explaining that confusion.
+ *
+ *  - OMAP chips have a controller called McBSP, which is
+ *    incompatible with the DaVinci flavor of McBSP.
+ *
+ *  - Newer DaVinci chips have a controller called McASP,
+ *    incompatible with ASP and with either McBSP.
+ *
+ * In short:  this uses ASP to implement I2S, not McBSP.
+ * And it won't be the only DaVinci implemention of I2S.
+ */
 #define DAVINCI_MCBSP_DRR_REG	0x00
 #define DAVINCI_MCBSP_DXR_REG	0x04
 #define DAVINCI_MCBSP_SPCR_REG	0x08
@@ -421,7 +441,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+	struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
 	struct davinci_mcbsp_dev *dev;
 	struct resource *mem, *ioarea;
 	struct evm_snd_platform_data *pdata;
@@ -448,7 +468,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
 
 	cpu_dai->private_data = dev;
 
-	dev->clk = clk_get(&pdev->dev, "McBSPCLK");
+	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		ret = -ENODEV;
 		goto err_free_mem;
@@ -483,7 +503,7 @@ static void davinci_i2s_remove(struct platform_device *pdev,
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+	struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
 	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
 	struct resource *mem;
 
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 7af3b5b3a53..a0599658848 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -22,6 +22,7 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
+#include <mach/edma.h>
 
 #include "davinci-pcm.h"
 
@@ -51,7 +52,7 @@ struct davinci_runtime_data {
 	spinlock_t lock;
 	int period;		/* current DMA period */
 	int master_lch;		/* Master DMA channel */
-	int slave_lch;		/* Slave DMA channel */
+	int slave_lch;		/* linked parameter RAM reload slot */
 	struct davinci_pcm_dma_params *params;	/* DMA params */
 };
 
@@ -90,18 +91,18 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream)
 		dst_bidx = data_type;
 	}
 
-	davinci_set_dma_src_params(lch, src, INCR, W8BIT);
-	davinci_set_dma_dest_params(lch, dst, INCR, W8BIT);
-	davinci_set_dma_src_index(lch, src_bidx, 0);
-	davinci_set_dma_dest_index(lch, dst_bidx, 0);
-	davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+	edma_set_src(lch, src, INCR, W8BIT);
+	edma_set_dest(lch, dst, INCR, W8BIT);
+	edma_set_src_index(lch, src_bidx, 0);
+	edma_set_dest_index(lch, dst_bidx, 0);
+	edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
 
 	prtd->period++;
 	if (unlikely(prtd->period >= runtime->periods))
 		prtd->period = 0;
 }
 
-static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
 {
 	struct snd_pcm_substream *substream = data;
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
@@ -125,7 +126,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
-	int tcc = TCC_ANY;
+	struct edmacc_param p_ram;
 	int ret;
 
 	if (!dma_data)
@@ -134,22 +135,34 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	prtd->params = dma_data;
 
 	/* Request master DMA channel */
-	ret = davinci_request_dma(prtd->params->channel, prtd->params->name,
+	ret = edma_alloc_channel(prtd->params->channel,
 				  davinci_pcm_dma_irq, substream,
-				  &prtd->master_lch, &tcc, EVENTQ_0);
-	if (ret)
+				  EVENTQ_0);
+	if (ret < 0)
 		return ret;
+	prtd->master_lch = ret;
 
-	/* Request slave DMA channel */
-	ret = davinci_request_dma(PARAM_ANY, "Link",
-				  NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0);
-	if (ret) {
-		davinci_free_dma(prtd->master_lch);
+	/* Request parameter RAM reload slot */
+	ret = edma_alloc_slot(EDMA_SLOT_ANY);
+	if (ret < 0) {
+		edma_free_channel(prtd->master_lch);
 		return ret;
 	}
-
-	/* Link slave DMA channel in loopback */
-	davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch);
+	prtd->slave_lch = ret;
+
+	/* Issue transfer completion IRQ when the channel completes a
+	 * transfer, then always reload from the same slot (by a kind
+	 * of loopback link).  The completion IRQ handler will update
+	 * the reload slot with a new buffer.
+	 *
+	 * REVISIT save p_ram here after setting up everything except
+	 * the buffer and its length (ccnt) ... use it as a template
+	 * so davinci_pcm_enqueue_dma() takes less time in IRQ.
+	 */
+	edma_read_slot(prtd->slave_lch, &p_ram);
+	p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
+	p_ram.link_bcntrld = prtd->slave_lch << 5;
+	edma_write_slot(prtd->slave_lch, &p_ram);
 
 	return 0;
 }
@@ -165,12 +178,12 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		davinci_start_dma(prtd->master_lch);
+		edma_start(prtd->master_lch);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		davinci_stop_dma(prtd->master_lch);
+		edma_stop(prtd->master_lch);
 		break;
 	default:
 		ret = -EINVAL;
@@ -185,14 +198,14 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct paramentry_descriptor temp;
+	struct edmacc_param temp;
 
 	prtd->period = 0;
 	davinci_pcm_enqueue_dma(substream);
 
-	/* Get slave channel dma params for master channel startup */
-	davinci_get_dma_params(prtd->slave_lch, &temp);
-	davinci_set_dma_params(prtd->master_lch, &temp);
+	/* Copy self-linked parameter RAM entry into master channel */
+	edma_read_slot(prtd->slave_lch, &temp);
+	edma_write_slot(prtd->master_lch, &temp);
 
 	return 0;
 }
@@ -208,7 +221,7 @@ davinci_pcm_pointer(struct snd_pcm_substream *substream)
 
 	spin_lock(&prtd->lock);
 
-	davinci_dma_getposition(prtd->master_lch, &src, &dst);
+	edma_get_position(prtd->master_lch, &src, &dst);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		count = src - runtime->dma_addr;
 	else
@@ -253,10 +266,10 @@ static int davinci_pcm_close(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd = runtime->private_data;
 
-	davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch);
+	edma_unlink(prtd->slave_lch);
 
-	davinci_free_dma(prtd->slave_lch);
-	davinci_free_dma(prtd->master_lch);
+	edma_free_slot(prtd->slave_lch);
+	edma_free_channel(prtd->master_lch);
 
 	kfree(prtd);
 
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 9fc90828337..5dbebf82249 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,5 +1,8 @@
 config SND_SOC_OF_SIMPLE
 	tristate
+	
+config SND_MPC52xx_DMA
+	tristate
 
 # ASoC platform support for the Freescale MPC8610 SOC.  This compiles drivers
 # for the SSI and the Elo DMA controller.  You will still need to select
@@ -22,7 +25,34 @@ config SND_SOC_MPC8610_HPCD
 config SND_SOC_MPC5200_I2S
 	tristate "Freescale MPC5200 PSC in I2S mode driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select SND_SOC_OF_SIMPLE
+	select SND_MPC52xx_DMA
 	select PPC_BESTCOMM_GEN_BD
 	help
 	  Say Y here to support the MPC5200 PSCs in I2S mode.
+
+config SND_SOC_MPC5200_AC97
+	tristate "Freescale MPC5200 PSC in AC97 mode driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select AC97_BUS
+	select SND_MPC52xx_DMA
+	select PPC_BESTCOMM_GEN_BD
+	help
+	  Say Y here to support the MPC5200 PSCs in AC97 mode.
+
+config SND_MPC52xx_SOC_PCM030
+	tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
+	depends on PPC_MPC5200_SIMPLE && BROKEN
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_WM9712
+	help
+	  Say Y if you want to add support for sound on the Phytec pcm030
+	  baseboard.
+
+config SND_MPC52xx_SOC_EFIKA
+	tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
+	depends on PPC_EFIKA && BROKEN
+	select SND_SOC_MPC5200_AC97
+	select SND_SOC_STAC9766
+	help
+	  Say Y if you want to add support for sound on the Efika.
+
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index f85134c8638..a83a73967ec 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -10,5 +10,12 @@ snd-soc-fsl-ssi-objs := fsl_ssi.o
 snd-soc-fsl-dma-objs := fsl_dma.o
 obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o
 
+# MPC5200 Platform Support
+obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
 obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o
+obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
+
+# MPC5200 Machine Support
+obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
+obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
 
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
new file mode 100644
index 00000000000..85b0e756950
--- /dev/null
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -0,0 +1,90 @@
+/*
+ * Efika driver for the PSC of the Freescale MPC52xx
+ * configured as AC97 interface
+ *
+ * Copyright 2008 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-of-simple.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+#include "../codecs/stac9766.h"
+
+static struct snd_soc_device device;
+static struct snd_soc_card card;
+
+static struct snd_soc_dai_link efika_fabric_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 Analog",
+	.codec_dai = &stac9766_dai[STAC9766_DAI_AC97_ANALOG],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL],
+},
+{
+	.name = "AC97",
+	.stream_name = "AC97 IEC958",
+	.codec_dai = &stac9766_dai[STAC9766_DAI_AC97_DIGITAL],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF],
+},
+};
+
+static __init int efika_fabric_init(void)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	if (!machine_is_compatible("bplan,efika"))
+		return -ENODEV;
+
+	card.platform = &mpc5200_audio_dma_platform;
+	card.name = "Efika";
+	card.dai_link = efika_fabric_dai;
+	card.num_links = ARRAY_SIZE(efika_fabric_dai);
+
+	device.card = &card;
+	device.codec_dev = &soc_codec_dev_stac9766;
+
+	pdev = platform_device_alloc("soc-audio", 1);
+	if (!pdev) {
+		pr_err("efika_fabric_init: platform_device_alloc() failed\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, &device);
+	device.dev = &pdev->dev;
+
+	rc = platform_device_add(pdev);
+	if (rc) {
+		pr_err("efika_fabric_init: platform_device_add() failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+module_init(efika_fabric_init);
+
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION(DRV_NAME ": mpc5200 Efika fabric driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 3711d8454d9..93f0f38a32c 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -375,18 +375,14 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		struct snd_pcm_runtime *first_runtime =
 			ssi_private->first_stream->runtime;
 
-		if (!first_runtime->rate || !first_runtime->sample_bits) {
+		if (!first_runtime->sample_bits) {
 			dev_err(substream->pcm->card->dev,
-				"set sample rate and size in %s stream first\n",
+				"set sample size in %s stream first\n",
 				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
 				? "capture" : "playback");
 			return -EAGAIN;
 		}
 
-		snd_pcm_hw_constraint_minmax(substream->runtime,
-			SNDRV_PCM_HW_PARAM_RATE,
-			first_runtime->rate, first_runtime->rate);
-
 		/* If we're in synchronous mode, then we need to constrain
 		 * the sample size as well.  We don't support independent sample
 		 * rates in asynchronous mode.
@@ -674,7 +670,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info)
 	ssi_private->dev = ssi_info->dev;
 	ssi_private->asynchronous = ssi_info->asynchronous;
 
-	ssi_private->dev->driver_data = fsl_ssi_dai;
+	dev_set_drvdata(ssi_private->dev, fsl_ssi_dai);
 
 	/* Initialize the the device_attribute structure */
 	dev_attr->attr.name = "ssi-stats";
@@ -693,6 +689,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info)
 	fsl_ssi_dai->name = ssi_private->name;
 	fsl_ssi_dai->id = ssi_info->id;
 	fsl_ssi_dai->dev = ssi_info->dev;
+	fsl_ssi_dai->symmetric_rates = 1;
 
 	ret = snd_soc_register_dai(fsl_ssi_dai);
 	if (ret != 0) {
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
new file mode 100644
index 00000000000..efec33a1c5b
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -0,0 +1,564 @@
+/*
+ * Freescale MPC5200 PSC DMA
+ * ALSA SoC Platform driver
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <sound/soc.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/gen_bd.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+
+/*
+ * Interrupt handlers
+ */
+static irqreturn_t psc_dma_status_irq(int irq, void *_psc_dma)
+{
+	struct psc_dma *psc_dma = _psc_dma;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+	u16 isr;
+
+	isr = in_be16(&regs->mpc52xx_psc_isr);
+
+	/* Playback underrun error */
+	if (psc_dma->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP))
+		psc_dma->stats.underrun_count++;
+
+	/* Capture overrun error */
+	if (psc_dma->capture.active && (isr & MPC52xx_PSC_IMR_ORERR))
+		psc_dma->stats.overrun_count++;
+
+	out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * psc_dma_bcom_enqueue_next_buffer - Enqueue another audio buffer
+ * @s: pointer to stream private data structure
+ *
+ * Enqueues another audio period buffer into the bestcomm queue.
+ *
+ * Note: The routine must only be called when there is space available in
+ * the queue.  Otherwise the enqueue will fail and the audio ring buffer
+ * will get out of sync
+ */
+static void psc_dma_bcom_enqueue_next_buffer(struct psc_dma_stream *s)
+{
+	struct bcom_bd *bd;
+
+	/* Prepare and enqueue the next buffer descriptor */
+	bd = bcom_prepare_next_buffer(s->bcom_task);
+	bd->status = s->period_bytes;
+	bd->data[0] = s->period_next_pt;
+	bcom_submit_next_buffer(s->bcom_task, NULL);
+
+	/* Update for next period */
+	s->period_next_pt += s->period_bytes;
+	if (s->period_next_pt >= s->period_end)
+		s->period_next_pt = s->period_start;
+}
+
+static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s)
+{
+	while (s->appl_ptr < s->runtime->control->appl_ptr) {
+
+		if (bcom_queue_full(s->bcom_task))
+			return;
+
+		s->appl_ptr += s->period_size;
+
+		psc_dma_bcom_enqueue_next_buffer(s);
+	}
+}
+
+/* Bestcomm DMA irq handler */
+static irqreturn_t psc_dma_bcom_irq_tx(int irq, void *_psc_dma_stream)
+{
+	struct psc_dma_stream *s = _psc_dma_stream;
+
+	spin_lock(&s->psc_dma->lock);
+	/* For each finished period, dequeue the completed period buffer
+	 * and enqueue a new one in it's place. */
+	while (bcom_buffer_done(s->bcom_task)) {
+		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+
+		s->period_current_pt += s->period_bytes;
+		if (s->period_current_pt >= s->period_end)
+			s->period_current_pt = s->period_start;
+	}
+	psc_dma_bcom_enqueue_tx(s);
+	spin_unlock(&s->psc_dma->lock);
+
+	/* If the stream is active, then also inform the PCM middle layer
+	 * of the period finished event. */
+	if (s->active)
+		snd_pcm_period_elapsed(s->stream);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t psc_dma_bcom_irq_rx(int irq, void *_psc_dma_stream)
+{
+	struct psc_dma_stream *s = _psc_dma_stream;
+
+	spin_lock(&s->psc_dma->lock);
+	/* For each finished period, dequeue the completed period buffer
+	 * and enqueue a new one in it's place. */
+	while (bcom_buffer_done(s->bcom_task)) {
+		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+
+		s->period_current_pt += s->period_bytes;
+		if (s->period_current_pt >= s->period_end)
+			s->period_current_pt = s->period_start;
+
+		psc_dma_bcom_enqueue_next_buffer(s);
+	}
+	spin_unlock(&s->psc_dma->lock);
+
+	/* If the stream is active, then also inform the PCM middle layer
+	 * of the period finished event. */
+	if (s->active)
+		snd_pcm_period_elapsed(s->stream);
+
+	return IRQ_HANDLED;
+}
+
+static int psc_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+/**
+ * psc_dma_trigger: start and stop the DMA transfer.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the DMA
+ * transfer of data.
+ */
+static int psc_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct psc_dma_stream *s;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+	u16 imr;
+	unsigned long flags;
+	int i;
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	dev_dbg(psc_dma->dev, "psc_dma_trigger(substream=%p, cmd=%i)"
+		" stream_id=%i\n",
+		substream, cmd, substream->pstr->stream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		s->period_bytes = frames_to_bytes(runtime,
+						  runtime->period_size);
+		s->period_start = virt_to_phys(runtime->dma_area);
+		s->period_end = s->period_start +
+				(s->period_bytes * runtime->periods);
+		s->period_next_pt = s->period_start;
+		s->period_current_pt = s->period_start;
+		s->period_size = runtime->period_size;
+		s->active = 1;
+
+		/* track appl_ptr so that we have a better chance of detecting
+		 * end of stream and not over running it.
+		 */
+		s->runtime = runtime;
+		s->appl_ptr = s->runtime->control->appl_ptr -
+				(runtime->period_size * runtime->periods);
+
+		/* Fill up the bestcomm bd queue and enable DMA.
+		 * This will begin filling the PSC's fifo.
+		 */
+		spin_lock_irqsave(&psc_dma->lock, flags);
+
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+			bcom_gen_bd_rx_reset(s->bcom_task);
+			for (i = 0; i < runtime->periods; i++)
+				if (!bcom_queue_full(s->bcom_task))
+					psc_dma_bcom_enqueue_next_buffer(s);
+		} else {
+			bcom_gen_bd_tx_reset(s->bcom_task);
+			psc_dma_bcom_enqueue_tx(s);
+		}
+
+		bcom_enable(s->bcom_task);
+		spin_unlock_irqrestore(&psc_dma->lock, flags);
+
+		out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
+
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		s->active = 0;
+
+		spin_lock_irqsave(&psc_dma->lock, flags);
+		bcom_disable(s->bcom_task);
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+			bcom_gen_bd_rx_reset(s->bcom_task);
+		else
+			bcom_gen_bd_tx_reset(s->bcom_task);
+		spin_unlock_irqrestore(&psc_dma->lock, flags);
+
+		break;
+
+	default:
+		dev_dbg(psc_dma->dev, "invalid command\n");
+		return -EINVAL;
+	}
+
+	/* Update interrupt enable settings */
+	imr = 0;
+	if (psc_dma->playback.active)
+		imr |= MPC52xx_PSC_IMR_TXEMP;
+	if (psc_dma->capture.active)
+		imr |= MPC52xx_PSC_IMR_ORERR;
+	out_be16(&regs->isr_imr.imr, psc_dma->imr | imr);
+
+	return 0;
+}
+
+
+/* ---------------------------------------------------------------------
+ * The PSC DMA 'ASoC platform' driver
+ *
+ * Can be referenced by an 'ASoC machine' driver
+ * This driver only deals with the audio bus; it doesn't have any
+ * interaction with the attached codec
+ */
+
+static const struct snd_pcm_hardware psc_dma_hardware = {
+	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_BATCH,
+	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
+		SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
+	.rate_min = 8000,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.period_bytes_max	= 1024 * 1024,
+	.period_bytes_min	= 32,
+	.periods_min		= 2,
+	.periods_max		= 256,
+	.buffer_bytes_max	= 2 * 1024 * 1024,
+	.fifo_size		= 512,
+};
+
+static int psc_dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+	int rc;
+
+	dev_dbg(psc_dma->dev, "psc_dma_open(substream=%p)\n", substream);
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	snd_soc_set_runtime_hwparams(substream, &psc_dma_hardware);
+
+	rc = snd_pcm_hw_constraint_integer(runtime,
+		SNDRV_PCM_HW_PARAM_PERIODS);
+	if (rc < 0) {
+		dev_err(substream->pcm->card->dev, "invalid buffer size\n");
+		return rc;
+	}
+
+	s->stream = substream;
+	return 0;
+}
+
+static int psc_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+
+	dev_dbg(psc_dma->dev, "psc_dma_close(substream=%p)\n", substream);
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	if (!psc_dma->playback.active &&
+	    !psc_dma->capture.active) {
+
+		/* Disable all interrupts and reset the PSC */
+		out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+		out_8(&psc_dma->psc_regs->command, 4 << 4); /* reset error */
+	}
+	s->stream = NULL;
+	return 0;
+}
+
+static snd_pcm_uframes_t
+psc_dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s;
+	dma_addr_t count;
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		s = &psc_dma->capture;
+	else
+		s = &psc_dma->playback;
+
+	count = s->period_current_pt - s->period_start;
+
+	return bytes_to_frames(substream->runtime, count);
+}
+
+static int
+psc_dma_hw_params(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params)
+{
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	return 0;
+}
+
+static struct snd_pcm_ops psc_dma_ops = {
+	.open		= psc_dma_open,
+	.close		= psc_dma_close,
+	.hw_free	= psc_dma_hw_free,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.pointer	= psc_dma_pointer,
+	.trigger	= psc_dma_trigger,
+	.hw_params	= psc_dma_hw_params,
+};
+
+static u64 psc_dma_dmamask = 0xffffffff;
+static int psc_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
+			   struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	size_t size = psc_dma_hardware.buffer_bytes_max;
+	int rc = 0;
+
+	dev_dbg(rtd->socdev->dev, "psc_dma_new(card=%p, dai=%p, pcm=%p)\n",
+		card, dai, pcm);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &psc_dma_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (pcm->streams[0].substream) {
+		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
+				size, &pcm->streams[0].substream->dma_buffer);
+		if (rc)
+			goto playback_alloc_err;
+	}
+
+	if (pcm->streams[1].substream) {
+		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
+				size, &pcm->streams[1].substream->dma_buffer);
+		if (rc)
+			goto capture_alloc_err;
+	}
+
+	if (rtd->socdev->card->codec->ac97)
+		rtd->socdev->card->codec->ac97->private_data = psc_dma;
+
+	return 0;
+
+ capture_alloc_err:
+	if (pcm->streams[0].substream)
+		snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
+
+ playback_alloc_err:
+	dev_err(card->dev, "Cannot allocate buffer(s)\n");
+
+	return -ENOMEM;
+}
+
+static void psc_dma_free(struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
+	struct snd_pcm_substream *substream;
+	int stream;
+
+	dev_dbg(rtd->socdev->dev, "psc_dma_free(pcm=%p)\n", pcm);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (substream) {
+			snd_dma_free_pages(&substream->dma_buffer);
+			substream->dma_buffer.area = NULL;
+			substream->dma_buffer.addr = 0;
+		}
+	}
+}
+
+struct snd_soc_platform mpc5200_audio_dma_platform = {
+	.name		= "mpc5200-psc-audio",
+	.pcm_ops	= &psc_dma_ops,
+	.pcm_new	= &psc_dma_new,
+	.pcm_free	= &psc_dma_free,
+};
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_platform);
+
+int mpc5200_audio_dma_create(struct of_device *op)
+{
+	phys_addr_t fifo;
+	struct psc_dma *psc_dma;
+	struct resource res;
+	int size, irq, rc;
+	const __be32 *prop;
+	void __iomem *regs;
+
+	/* Fetch the registers and IRQ of the PSC */
+	irq = irq_of_parse_and_map(op->node, 0);
+	if (of_address_to_resource(op->node, 0, &res)) {
+		dev_err(&op->dev, "Missing reg property\n");
+		return -ENODEV;
+	}
+	regs = ioremap(res.start, 1 + res.end - res.start);
+	if (!regs) {
+		dev_err(&op->dev, "Could not map registers\n");
+		return -ENODEV;
+	}
+
+	/* Allocate and initialize the driver private data */
+	psc_dma = kzalloc(sizeof *psc_dma, GFP_KERNEL);
+	if (!psc_dma) {
+		iounmap(regs);
+		return -ENOMEM;
+	}
+
+	/* Get the PSC ID */
+	prop = of_get_property(op->node, "cell-index", &size);
+	if (!prop || size < sizeof *prop)
+		return -ENODEV;
+
+	spin_lock_init(&psc_dma->lock);
+	psc_dma->id = be32_to_cpu(*prop);
+	psc_dma->irq = irq;
+	psc_dma->psc_regs = regs;
+	psc_dma->fifo_regs = regs + sizeof *psc_dma->psc_regs;
+	psc_dma->dev = &op->dev;
+	psc_dma->playback.psc_dma = psc_dma;
+	psc_dma->capture.psc_dma = psc_dma;
+	snprintf(psc_dma->name, sizeof psc_dma->name, "PSC%u", psc_dma->id);
+
+	/* Find the address of the fifo data registers and setup the
+	 * DMA tasks */
+	fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32);
+	psc_dma->capture.bcom_task =
+		bcom_psc_gen_bd_rx_init(psc_dma->id, 10, fifo, 512);
+	psc_dma->playback.bcom_task =
+		bcom_psc_gen_bd_tx_init(psc_dma->id, 10, fifo);
+	if (!psc_dma->capture.bcom_task ||
+	    !psc_dma->playback.bcom_task) {
+		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
+		iounmap(regs);
+		kfree(psc_dma);
+		return -ENODEV;
+	}
+
+	/* Disable all interrupts and reset the PSC */
+	out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+	 /* reset receiver */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_RX);
+	 /* reset transmitter */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_TX);
+	 /* reset error */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_RST_ERR_STAT);
+	 /* reset mode */
+	out_8(&psc_dma->psc_regs->command, MPC52xx_PSC_SEL_MODE_REG_1);
+
+	/* Set up mode register;
+	 * First write: RxRdy (FIFO Alarm) generates rx FIFO irq
+	 * Second write: register Normal mode for non loopback
+	 */
+	out_8(&psc_dma->psc_regs->mode, 0);
+	out_8(&psc_dma->psc_regs->mode, 0);
+
+	/* Set the TX and RX fifo alarm thresholds */
+	out_be16(&psc_dma->fifo_regs->rfalarm, 0x100);
+	out_8(&psc_dma->fifo_regs->rfcntl, 0x4);
+	out_be16(&psc_dma->fifo_regs->tfalarm, 0x100);
+	out_8(&psc_dma->fifo_regs->tfcntl, 0x7);
+
+	/* Lookup the IRQ numbers */
+	psc_dma->playback.irq =
+		bcom_get_task_irq(psc_dma->playback.bcom_task);
+	psc_dma->capture.irq =
+		bcom_get_task_irq(psc_dma->capture.bcom_task);
+
+	rc = request_irq(psc_dma->irq, &psc_dma_status_irq, IRQF_SHARED,
+			 "psc-dma-status", psc_dma);
+	rc |= request_irq(psc_dma->capture.irq,
+			  &psc_dma_bcom_irq_rx, IRQF_SHARED,
+			  "psc-dma-capture", &psc_dma->capture);
+	rc |= request_irq(psc_dma->playback.irq,
+			  &psc_dma_bcom_irq_tx, IRQF_SHARED,
+			  "psc-dma-playback", &psc_dma->playback);
+	if (rc) {
+		free_irq(psc_dma->irq, psc_dma);
+		free_irq(psc_dma->capture.irq,
+			 &psc_dma->capture);
+		free_irq(psc_dma->playback.irq,
+			 &psc_dma->playback);
+		return -ENODEV;
+	}
+
+	/* Save what we've done so it can be found again later */
+	dev_set_drvdata(&op->dev, psc_dma);
+
+	/* Tell the ASoC OF helpers about it */
+	return snd_soc_register_platform(&mpc5200_audio_dma_platform);
+}
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_create);
+
+int mpc5200_audio_dma_destroy(struct of_device *op)
+{
+	struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
+
+	dev_dbg(&op->dev, "mpc5200_audio_dma_destroy()\n");
+
+	snd_soc_unregister_platform(&mpc5200_audio_dma_platform);
+
+	bcom_gen_bd_rx_release(psc_dma->capture.bcom_task);
+	bcom_gen_bd_tx_release(psc_dma->playback.bcom_task);
+
+	/* Release irqs */
+	free_irq(psc_dma->irq, psc_dma);
+	free_irq(psc_dma->capture.irq, &psc_dma->capture);
+	free_irq(psc_dma->playback.irq, &psc_dma->playback);
+
+	iounmap(psc_dma->psc_regs);
+	kfree(psc_dma);
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mpc5200_audio_dma_destroy);
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in DMA mode ASoC Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
new file mode 100644
index 00000000000..2000803f06a
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -0,0 +1,80 @@
+/*
+ * Freescale MPC5200 Audio DMA driver
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC5200_DMA_H__
+#define __SOUND_SOC_FSL_MPC5200_DMA_H__
+
+#define PSC_STREAM_NAME_LEN 32
+
+/**
+ * psc_ac97_stream - Data specific to a single stream (playback or capture)
+ * @active:		flag indicating if the stream is active
+ * @psc_dma:		pointer back to parent psc_dma data structure
+ * @bcom_task:		bestcomm task structure
+ * @irq:		irq number for bestcomm task
+ * @period_start:	physical address of start of DMA region
+ * @period_end:		physical address of end of DMA region
+ * @period_next_pt:	physical address of next DMA buffer to enqueue
+ * @period_bytes:	size of DMA period in bytes
+ */
+struct psc_dma_stream {
+	struct snd_pcm_runtime *runtime;
+	snd_pcm_uframes_t appl_ptr;
+
+	int active;
+	struct psc_dma *psc_dma;
+	struct bcom_task *bcom_task;
+	int irq;
+	struct snd_pcm_substream *stream;
+	dma_addr_t period_start;
+	dma_addr_t period_end;
+	dma_addr_t period_next_pt;
+	dma_addr_t period_current_pt;
+	int period_bytes;
+	int period_size;
+};
+
+/**
+ * psc_dma - Private driver data
+ * @name: short name for this device ("PSC0", "PSC1", etc)
+ * @psc_regs: pointer to the PSC's registers
+ * @fifo_regs: pointer to the PSC's FIFO registers
+ * @irq: IRQ of this PSC
+ * @dev: struct device pointer
+ * @dai: the CPU DAI for this device
+ * @sicr: Base value used in serial interface control register; mode is ORed
+ *        with this value.
+ * @playback: Playback stream context data
+ * @capture: Capture stream context data
+ */
+struct psc_dma {
+	char name[32];
+	struct mpc52xx_psc __iomem *psc_regs;
+	struct mpc52xx_psc_fifo __iomem *fifo_regs;
+	unsigned int irq;
+	struct device *dev;
+	spinlock_t lock;
+	u32 sicr;
+	uint sysclk;
+	int imr;
+	int id;
+	unsigned int slots;
+
+	/* per-stream data */
+	struct psc_dma_stream playback;
+	struct psc_dma_stream capture;
+
+	/* Statistics */
+	struct {
+		unsigned long overrun_count;
+		unsigned long underrun_count;
+	} stats;
+};
+
+int mpc5200_audio_dma_create(struct of_device *op);
+int mpc5200_audio_dma_destroy(struct of_device *op);
+
+extern struct snd_soc_platform mpc5200_audio_dma_platform;
+
+#endif /* __SOUND_SOC_FSL_MPC5200_DMA_H__ */
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
new file mode 100644
index 00000000000..794a247b3eb
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -0,0 +1,329 @@
+/*
+ * linux/sound/mpc5200-ac97.c -- AC97 support for the Freescale MPC52xx chip.
+ *
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/time.h>
+#include <asm/delay.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+
+#define DRV_NAME "mpc5200-psc-ac97"
+
+/* ALSA only supports a single AC97 device so static is recommend here */
+static struct psc_dma *psc_dma;
+
+static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
+{
+	int status;
+	unsigned int val;
+
+	/* Wait for command send status zero = ready */
+	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_CMDSEND), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 bus (rdy)\n");
+		return -ENODEV;
+	}
+	/* Send the read */
+	out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
+
+	/* Wait for the answer */
+	status = spin_event_timeout((in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_DATA_VAL), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 read (val) %x\n",
+				in_be16(&psc_dma->psc_regs->sr_csr.status));
+		return -ENODEV;
+	}
+	/* Get the data */
+	val = in_be32(&psc_dma->psc_regs->ac97_data);
+	if (((val >> 24) & 0x7f) != reg) {
+		pr_err("reg echo error on ac97 read\n");
+		return -ENODEV;
+	}
+	val = (val >> 8) & 0xffff;
+
+	return (unsigned short) val;
+}
+
+static void psc_ac97_write(struct snd_ac97 *ac97,
+				unsigned short reg, unsigned short val)
+{
+	int status;
+
+	/* Wait for command status zero = ready */
+	status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
+				MPC52xx_PSC_SR_CMDSEND), 100, 0);
+	if (status == 0) {
+		pr_err("timeout on ac97 bus (write)\n");
+		return;
+	}
+	/* Write data */
+	out_be32(&psc_dma->psc_regs->ac97_cmd,
+			((reg & 0x7f) << 24) | (val << 8));
+}
+
+static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
+	udelay(3);
+	out_be32(&regs->sicr, psc_dma->sicr);
+}
+
+static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	/* Do a cold reset */
+	out_8(&regs->op1, MPC52xx_PSC_OP_RES);
+	udelay(10);
+	out_8(&regs->op0, MPC52xx_PSC_OP_RES);
+	udelay(50);
+	psc_ac97_warm_reset(ac97);
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= psc_ac97_read,
+	.write		= psc_ac97_write,
+	.reset		= psc_ac97_cold_reset,
+	.warm_reset	= psc_ac97_warm_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int psc_ac97_hw_analog_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+		" periods=%i buffer_size=%i  buffer_bytes=%i channels=%i"
+		" rate=%i format=%i\n",
+		__func__, substream, params_period_size(params),
+		params_period_bytes(params), params_periods(params),
+		params_buffer_size(params), params_buffer_bytes(params),
+		params_channels(params), params_rate(params),
+		params_format(params));
+
+
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+		if (params_channels(params) == 1)
+			psc_dma->slots |= 0x00000100;
+		else
+			psc_dma->slots |= 0x00000300;
+	} else {
+		if (params_channels(params) == 1)
+			psc_dma->slots |= 0x01000000;
+		else
+			psc_dma->slots |= 0x03000000;
+	}
+	out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+
+	return 0;
+}
+
+static int psc_ac97_hw_digital_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+
+	if (params_channels(params) == 1)
+		out_be32(&psc_dma->psc_regs->ac97_slots, 0x01000000);
+	else
+		out_be32(&psc_dma->psc_regs->ac97_slots, 0x03000000);
+
+	return 0;
+}
+
+static int psc_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+							struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_STOP:
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+			psc_dma->slots &= 0xFFFF0000;
+		else
+			psc_dma->slots &= 0x0000FFFF;
+
+		out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+		break;
+	}
+	return 0;
+}
+
+static int psc_ac97_probe(struct platform_device *pdev,
+					struct snd_soc_dai *cpu_dai)
+{
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+
+	/* Go */
+	out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * ALSA SoC Bindings
+ *
+ * - Digital Audio Interface (DAI) template
+ * - create/destroy dai hooks
+ */
+
+/**
+ * psc_ac97_dai_template: template CPU Digital Audio Interface
+ */
+static struct snd_soc_dai_ops psc_ac97_analog_ops = {
+	.hw_params	= psc_ac97_hw_analog_params,
+	.trigger	= psc_ac97_trigger,
+};
+
+static struct snd_soc_dai_ops psc_ac97_digital_ops = {
+	.hw_params	= psc_ac97_hw_digital_params,
+};
+
+struct snd_soc_dai psc_ac97_dai[] = {
+{
+	.name   = "AC97",
+	.ac97_control = 1,
+	.probe	= psc_ac97_probe,
+	.playback = {
+		.channels_min   = 1,
+		.channels_max   = 6,
+		.rates          = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_BE,
+	},
+	.capture = {
+		.channels_min   = 1,
+		.channels_max   = 2,
+		.rates          = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_BE,
+	},
+	.ops = &psc_ac97_analog_ops,
+},
+{
+	.name   = "SPDIF",
+	.ac97_control = 1,
+	.playback = {
+		.channels_min   = 1,
+		.channels_max   = 2,
+		.rates          = SNDRV_PCM_RATE_32000 | \
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
+	},
+	.ops = &psc_ac97_digital_ops,
+} };
+EXPORT_SYMBOL_GPL(psc_ac97_dai);
+
+
+
+/* ---------------------------------------------------------------------
+ * OF platform bus binding code:
+ * - Probe/remove operations
+ * - OF device match table
+ */
+static int __devinit psc_ac97_of_probe(struct of_device *op,
+				      const struct of_device_id *match)
+{
+	int rc, i;
+	struct snd_ac97 ac97;
+	struct mpc52xx_psc __iomem *regs;
+
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
+
+	for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
+		psc_ac97_dai[i].dev = &op->dev;
+
+	rc = snd_soc_register_dais(psc_ac97_dai, ARRAY_SIZE(psc_ac97_dai));
+	if (rc != 0) {
+		dev_err(&op->dev, "Failed to register DAI\n");
+		return rc;
+	}
+
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
+	ac97.private_data = psc_dma;
+
+	for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
+		psc_ac97_dai[i].private_data = psc_dma;
+
+	psc_dma->imr = 0;
+	out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
+
+	/* Configure the serial interface mode to AC97 */
+	psc_dma->sicr = MPC52xx_PSC_SICR_SIM_AC97 | MPC52xx_PSC_SICR_ENAC97;
+	out_be32(&regs->sicr, psc_dma->sicr);
+
+	/* No slots active */
+	out_be32(&regs->ac97_slots, 0x00000000);
+
+	return 0;
+}
+
+static int __devexit psc_ac97_of_remove(struct of_device *op)
+{
+	return mpc5200_audio_dma_destroy(op);
+}
+
+/* Match table for of_platform binding */
+static struct of_device_id psc_ac97_match[] __devinitdata = {
+	{ .compatible = "fsl,mpc5200-psc-ac97", },
+	{ .compatible = "fsl,mpc5200b-psc-ac97", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, psc_ac97_match);
+
+static struct of_platform_driver psc_ac97_driver = {
+	.match_table = psc_ac97_match,
+	.probe = psc_ac97_of_probe,
+	.remove = __devexit_p(psc_ac97_of_remove),
+	.driver = {
+		.name = "mpc5200-psc-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+/* ---------------------------------------------------------------------
+ * Module setup and teardown; simply register the of_platform driver
+ * for the PSC in AC97 mode.
+ */
+static int __init psc_ac97_init(void)
+{
+	return of_register_platform_driver(&psc_ac97_driver);
+}
+module_init(psc_ac97_init);
+
+static void __exit psc_ac97_exit(void)
+{
+	of_unregister_platform_driver(&psc_ac97_driver);
+}
+module_exit(psc_ac97_exit);
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION("mpc5200 AC97 module");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.h b/sound/soc/fsl/mpc5200_psc_ac97.h
new file mode 100644
index 00000000000..4bc18c35c36
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_ac97.h
@@ -0,0 +1,15 @@
+/*
+ * Freescale MPC5200 PSC in AC97 mode
+ * ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
+#define __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
+
+extern struct snd_soc_dai psc_ac97_dai[];
+
+#define MPC5200_AC97_NORMAL 0
+#define MPC5200_AC97_SPDIF 1
+
+#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ */
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 1111c710118..ce8de90fb94 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -3,31 +3,21 @@
  * ALSA SoC Digital Audio Interface (DAI) driver
  *
  * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ * Copyright (C) 2009 Jon Smirl, Digispeaker
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
 
-#include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/initval.h>
 #include <sound/soc.h>
-#include <sound/soc-of-simple.h>
 
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
 #include <asm/mpc52xx_psc.h>
 
-MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
-MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
-MODULE_LICENSE("GPL");
+#include "mpc5200_psc_i2s.h"
+#include "mpc5200_dma.h"
 
 /**
  * PSC_I2S_RATES: sample rates supported by the I2S
@@ -44,191 +34,17 @@ MODULE_LICENSE("GPL");
  * PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode
  */
 #define PSC_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \
-			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE | \
-			 SNDRV_PCM_FMTBIT_S32_BE)
-
-/**
- * psc_i2s_stream - Data specific to a single stream (playback or capture)
- * @active:		flag indicating if the stream is active
- * @psc_i2s:		pointer back to parent psc_i2s data structure
- * @bcom_task:		bestcomm task structure
- * @irq:		irq number for bestcomm task
- * @period_start:	physical address of start of DMA region
- * @period_end:		physical address of end of DMA region
- * @period_next_pt:	physical address of next DMA buffer to enqueue
- * @period_bytes:	size of DMA period in bytes
- */
-struct psc_i2s_stream {
-	int active;
-	struct psc_i2s *psc_i2s;
-	struct bcom_task *bcom_task;
-	int irq;
-	struct snd_pcm_substream *stream;
-	dma_addr_t period_start;
-	dma_addr_t period_end;
-	dma_addr_t period_next_pt;
-	dma_addr_t period_current_pt;
-	int period_bytes;
-};
-
-/**
- * psc_i2s - Private driver data
- * @name: short name for this device ("PSC0", "PSC1", etc)
- * @psc_regs: pointer to the PSC's registers
- * @fifo_regs: pointer to the PSC's FIFO registers
- * @irq: IRQ of this PSC
- * @dev: struct device pointer
- * @dai: the CPU DAI for this device
- * @sicr: Base value used in serial interface control register; mode is ORed
- *        with this value.
- * @playback: Playback stream context data
- * @capture: Capture stream context data
- */
-struct psc_i2s {
-	char name[32];
-	struct mpc52xx_psc __iomem *psc_regs;
-	struct mpc52xx_psc_fifo __iomem *fifo_regs;
-	unsigned int irq;
-	struct device *dev;
-	struct snd_soc_dai dai;
-	spinlock_t lock;
-	u32 sicr;
-
-	/* per-stream data */
-	struct psc_i2s_stream playback;
-	struct psc_i2s_stream capture;
-
-	/* Statistics */
-	struct {
-		int overrun_count;
-		int underrun_count;
-	} stats;
-};
-
-/*
- * Interrupt handlers
- */
-static irqreturn_t psc_i2s_status_irq(int irq, void *_psc_i2s)
-{
-	struct psc_i2s *psc_i2s = _psc_i2s;
-	struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
-	u16 isr;
-
-	isr = in_be16(&regs->mpc52xx_psc_isr);
-
-	/* Playback underrun error */
-	if (psc_i2s->playback.active && (isr & MPC52xx_PSC_IMR_TXEMP))
-		psc_i2s->stats.underrun_count++;
-
-	/* Capture overrun error */
-	if (psc_i2s->capture.active && (isr & MPC52xx_PSC_IMR_ORERR))
-		psc_i2s->stats.overrun_count++;
-
-	out_8(&regs->command, 4 << 4);	/* reset the error status */
-
-	return IRQ_HANDLED;
-}
-
-/**
- * psc_i2s_bcom_enqueue_next_buffer - Enqueue another audio buffer
- * @s: pointer to stream private data structure
- *
- * Enqueues another audio period buffer into the bestcomm queue.
- *
- * Note: The routine must only be called when there is space available in
- * the queue.  Otherwise the enqueue will fail and the audio ring buffer
- * will get out of sync
- */
-static void psc_i2s_bcom_enqueue_next_buffer(struct psc_i2s_stream *s)
-{
-	struct bcom_bd *bd;
-
-	/* Prepare and enqueue the next buffer descriptor */
-	bd = bcom_prepare_next_buffer(s->bcom_task);
-	bd->status = s->period_bytes;
-	bd->data[0] = s->period_next_pt;
-	bcom_submit_next_buffer(s->bcom_task, NULL);
-
-	/* Update for next period */
-	s->period_next_pt += s->period_bytes;
-	if (s->period_next_pt >= s->period_end)
-		s->period_next_pt = s->period_start;
-}
-
-/* Bestcomm DMA irq handler */
-static irqreturn_t psc_i2s_bcom_irq(int irq, void *_psc_i2s_stream)
-{
-	struct psc_i2s_stream *s = _psc_i2s_stream;
-
-	/* For each finished period, dequeue the completed period buffer
-	 * and enqueue a new one in it's place. */
-	while (bcom_buffer_done(s->bcom_task)) {
-		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-		s->period_current_pt += s->period_bytes;
-		if (s->period_current_pt >= s->period_end)
-			s->period_current_pt = s->period_start;
-		psc_i2s_bcom_enqueue_next_buffer(s);
-		bcom_enable(s->bcom_task);
-	}
-
-	/* If the stream is active, then also inform the PCM middle layer
-	 * of the period finished event. */
-	if (s->active)
-		snd_pcm_period_elapsed(s->stream);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * psc_i2s_startup: create a new substream
- *
- * This is the first function called when a stream is opened.
- *
- * If this is the first stream open, then grab the IRQ and program most of
- * the PSC registers.
- */
-static int psc_i2s_startup(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	int rc;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_startup(substream=%p)\n", substream);
-
-	if (!psc_i2s->playback.active &&
-	    !psc_i2s->capture.active) {
-		/* Setup the IRQs */
-		rc = request_irq(psc_i2s->irq, &psc_i2s_status_irq, IRQF_SHARED,
-				 "psc-i2s-status", psc_i2s);
-		rc |= request_irq(psc_i2s->capture.irq,
-				  &psc_i2s_bcom_irq, IRQF_SHARED,
-				  "psc-i2s-capture", &psc_i2s->capture);
-		rc |= request_irq(psc_i2s->playback.irq,
-				  &psc_i2s_bcom_irq, IRQF_SHARED,
-				  "psc-i2s-playback", &psc_i2s->playback);
-		if (rc) {
-			free_irq(psc_i2s->irq, psc_i2s);
-			free_irq(psc_i2s->capture.irq,
-				 &psc_i2s->capture);
-			free_irq(psc_i2s->playback.irq,
-				 &psc_i2s->playback);
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
+			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
 
 static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
+	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
 	u32 mode;
 
-	dev_dbg(psc_i2s->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
+	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
 		" periods=%i buffer_size=%i  buffer_bytes=%i\n",
 		__func__, substream, params_period_size(params),
 		params_period_bytes(params), params_periods(params),
@@ -248,175 +64,15 @@ static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
 		mode = MPC52xx_PSC_SICR_SIM_CODEC_32;
 		break;
 	default:
-		dev_dbg(psc_i2s->dev, "invalid format\n");
-		return -EINVAL;
-	}
-	out_be32(&psc_i2s->psc_regs->sicr, psc_i2s->sicr | mode);
-
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
-	return 0;
-}
-
-static int psc_i2s_hw_free(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	snd_pcm_set_runtime_buffer(substream, NULL);
-	return 0;
-}
-
-/**
- * psc_i2s_trigger: start and stop the DMA transfer.
- *
- * This function is called by ALSA to start, stop, pause, and resume the DMA
- * transfer of data.
- */
-static int psc_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-			   struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct psc_i2s_stream *s;
-	struct mpc52xx_psc __iomem *regs = psc_i2s->psc_regs;
-	u16 imr;
-	u8 psc_cmd;
-	unsigned long flags;
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_trigger(substream=%p, cmd=%i)"
-		" stream_id=%i\n",
-		substream, cmd, substream->pstr->stream);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		s->period_bytes = frames_to_bytes(runtime,
-						  runtime->period_size);
-		s->period_start = virt_to_phys(runtime->dma_area);
-		s->period_end = s->period_start +
-				(s->period_bytes * runtime->periods);
-		s->period_next_pt = s->period_start;
-		s->period_current_pt = s->period_start;
-		s->active = 1;
-
-		/* First; reset everything */
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-			out_8(&regs->command, MPC52xx_PSC_RST_RX);
-			out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
-		} else {
-			out_8(&regs->command, MPC52xx_PSC_RST_TX);
-			out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
-		}
-
-		/* Next, fill up the bestcomm bd queue and enable DMA.
-		 * This will begin filling the PSC's fifo. */
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-			bcom_gen_bd_rx_reset(s->bcom_task);
-		else
-			bcom_gen_bd_tx_reset(s->bcom_task);
-		while (!bcom_queue_full(s->bcom_task))
-			psc_i2s_bcom_enqueue_next_buffer(s);
-		bcom_enable(s->bcom_task);
-
-		/* Due to errata in the i2s mode; need to line up enabling
-		 * the transmitter with a transition on the frame sync
-		 * line */
-
-		spin_lock_irqsave(&psc_i2s->lock, flags);
-		/* first make sure it is low */
-		while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
-			;
-		/* then wait for the transition to high */
-		while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
-			;
-		/* Finally, enable the PSC.
-		 * Receiver must always be enabled; even when we only want
-		 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
-		psc_cmd = MPC52xx_PSC_RX_ENABLE;
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			psc_cmd |= MPC52xx_PSC_TX_ENABLE;
-		out_8(&regs->command, psc_cmd);
-		spin_unlock_irqrestore(&psc_i2s->lock, flags);
-
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-		/* Turn off the PSC */
-		s->active = 0;
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-			if (!psc_i2s->playback.active) {
-				out_8(&regs->command, 2 << 4);	/* reset rx */
-				out_8(&regs->command, 3 << 4);	/* reset tx */
-				out_8(&regs->command, 4 << 4);	/* reset err */
-			}
-		} else {
-			out_8(&regs->command, 3 << 4);	/* reset tx */
-			out_8(&regs->command, 4 << 4);	/* reset err */
-			if (!psc_i2s->capture.active)
-				out_8(&regs->command, 2 << 4);	/* reset rx */
-		}
-
-		bcom_disable(s->bcom_task);
-		while (!bcom_queue_empty(s->bcom_task))
-			bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-
-		break;
-
-	default:
-		dev_dbg(psc_i2s->dev, "invalid command\n");
+		dev_dbg(psc_dma->dev, "invalid format\n");
 		return -EINVAL;
 	}
-
-	/* Update interrupt enable settings */
-	imr = 0;
-	if (psc_i2s->playback.active)
-		imr |= MPC52xx_PSC_IMR_TXEMP;
-	if (psc_i2s->capture.active)
-		imr |= MPC52xx_PSC_IMR_ORERR;
-	out_be16(&regs->isr_imr.imr, imr);
+	out_be32(&psc_dma->psc_regs->sicr, psc_dma->sicr | mode);
 
 	return 0;
 }
 
 /**
- * psc_i2s_shutdown: shutdown the data transfer on a stream
- *
- * Shutdown the PSC if there are no other substreams open.
- */
-static void psc_i2s_shutdown(struct snd_pcm_substream *substream,
-			     struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_shutdown(substream=%p)\n", substream);
-
-	/*
-	 * If this is the last active substream, disable the PSC and release
-	 * the IRQ.
-	 */
-	if (!psc_i2s->playback.active &&
-	    !psc_i2s->capture.active) {
-
-		/* Disable all interrupts and reset the PSC */
-		out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0);
-		out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset tx */
-		out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset rx */
-		out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */
-		out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */
-
-		/* Release irqs */
-		free_irq(psc_i2s->irq, psc_i2s);
-		free_irq(psc_i2s->capture.irq, &psc_i2s->capture);
-		free_irq(psc_i2s->playback.irq, &psc_i2s->playback);
-	}
-}
-
-/**
  * psc_i2s_set_sysclk: set the clock frequency and direction
  *
  * This function is called by the machine driver to tell us what the clock
@@ -433,8 +89,8 @@ static void psc_i2s_shutdown(struct snd_pcm_substream *substream,
 static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
 			      int clk_id, unsigned int freq, int dir)
 {
-	struct psc_i2s *psc_i2s = cpu_dai->private_data;
-	dev_dbg(psc_i2s->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	dev_dbg(psc_dma->dev, "psc_i2s_set_sysclk(cpu_dai=%p, dir=%i)\n",
 				cpu_dai, dir);
 	return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
 }
@@ -452,8 +108,8 @@ static int psc_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
  */
 static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
 {
-	struct psc_i2s *psc_i2s = cpu_dai->private_data;
-	dev_dbg(psc_i2s->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
+	struct psc_dma *psc_dma = cpu_dai->private_data;
+	dev_dbg(psc_dma->dev, "psc_i2s_set_fmt(cpu_dai=%p, format=%i)\n",
 				cpu_dai, format);
 	return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL;
 }
@@ -469,16 +125,13 @@ static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
  * psc_i2s_dai_template: template CPU Digital Audio Interface
  */
 static struct snd_soc_dai_ops psc_i2s_dai_ops = {
-	.startup	= psc_i2s_startup,
 	.hw_params	= psc_i2s_hw_params,
-	.hw_free	= psc_i2s_hw_free,
-	.shutdown	= psc_i2s_shutdown,
-	.trigger	= psc_i2s_trigger,
 	.set_sysclk	= psc_i2s_set_sysclk,
 	.set_fmt	= psc_i2s_set_fmt,
 };
 
-static struct snd_soc_dai psc_i2s_dai_template = {
+struct snd_soc_dai psc_i2s_dai[] = {{
+	.name   = "I2S",
 	.playback = {
 		.channels_min = 2,
 		.channels_max = 2,
@@ -492,223 +145,8 @@ static struct snd_soc_dai psc_i2s_dai_template = {
 		.formats = PSC_I2S_FORMATS,
 	},
 	.ops = &psc_i2s_dai_ops,
-};
-
-/* ---------------------------------------------------------------------
- * The PSC I2S 'ASoC platform' driver
- *
- * Can be referenced by an 'ASoC machine' driver
- * This driver only deals with the audio bus; it doesn't have any
- * interaction with the attached codec
- */
-
-static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
-	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
-		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_BATCH,
-	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
-		   SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
-	.rate_min = 8000,
-	.rate_max = 48000,
-	.channels_min = 2,
-	.channels_max = 2,
-	.period_bytes_max	= 1024 * 1024,
-	.period_bytes_min	= 32,
-	.periods_min		= 2,
-	.periods_max		= 256,
-	.buffer_bytes_max	= 2 * 1024 * 1024,
-	.fifo_size		= 0,
-};
-
-static int psc_i2s_pcm_open(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_pcm_open(substream=%p)\n", substream);
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	snd_soc_set_runtime_hwparams(substream, &psc_i2s_pcm_hardware);
-
-	s->stream = substream;
-	return 0;
-}
-
-static int psc_i2s_pcm_close(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-
-	dev_dbg(psc_i2s->dev, "psc_i2s_pcm_close(substream=%p)\n", substream);
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	s->stream = NULL;
-	return 0;
-}
-
-static snd_pcm_uframes_t
-psc_i2s_pcm_pointer(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
-	struct psc_i2s_stream *s;
-	dma_addr_t count;
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_i2s->capture;
-	else
-		s = &psc_i2s->playback;
-
-	count = s->period_current_pt - s->period_start;
-
-	return bytes_to_frames(substream->runtime, count);
-}
-
-static struct snd_pcm_ops psc_i2s_pcm_ops = {
-	.open		= psc_i2s_pcm_open,
-	.close		= psc_i2s_pcm_close,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.pointer	= psc_i2s_pcm_pointer,
-};
-
-static u64 psc_i2s_pcm_dmamask = 0xffffffff;
-static int psc_i2s_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
-			   struct snd_pcm *pcm)
-{
-	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
-	size_t size = psc_i2s_pcm_hardware.buffer_bytes_max;
-	int rc = 0;
-
-	dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_new(card=%p, dai=%p, pcm=%p)\n",
-		card, dai, pcm);
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &psc_i2s_pcm_dmamask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = 0xffffffff;
-
-	if (pcm->streams[0].substream) {
-		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size,
-					&pcm->streams[0].substream->dma_buffer);
-		if (rc)
-			goto playback_alloc_err;
-	}
-
-	if (pcm->streams[1].substream) {
-		rc = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev, size,
-					&pcm->streams[1].substream->dma_buffer);
-		if (rc)
-			goto capture_alloc_err;
-	}
-
-	return 0;
-
- capture_alloc_err:
-	if (pcm->streams[0].substream)
-		snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
- playback_alloc_err:
-	dev_err(card->dev, "Cannot allocate buffer(s)\n");
-	return -ENOMEM;
-}
-
-static void psc_i2s_pcm_free(struct snd_pcm *pcm)
-{
-	struct snd_soc_pcm_runtime *rtd = pcm->private_data;
-	struct snd_pcm_substream *substream;
-	int stream;
-
-	dev_dbg(rtd->socdev->dev, "psc_i2s_pcm_free(pcm=%p)\n", pcm);
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (substream) {
-			snd_dma_free_pages(&substream->dma_buffer);
-			substream->dma_buffer.area = NULL;
-			substream->dma_buffer.addr = 0;
-		}
-	}
-}
-
-struct snd_soc_platform psc_i2s_pcm_soc_platform = {
-	.name		= "mpc5200-psc-audio",
-	.pcm_ops	= &psc_i2s_pcm_ops,
-	.pcm_new	= &psc_i2s_pcm_new,
-	.pcm_free	= &psc_i2s_pcm_free,
-};
-
-/* ---------------------------------------------------------------------
- * Sysfs attributes for debugging
- */
-
-static ssize_t psc_i2s_status_show(struct device *dev,
-			   struct device_attribute *attr, char *buf)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-
-	return sprintf(buf, "status=%.4x sicr=%.8x rfnum=%i rfstat=0x%.4x "
-			"tfnum=%i tfstat=0x%.4x\n",
-			in_be16(&psc_i2s->psc_regs->sr_csr.status),
-			in_be32(&psc_i2s->psc_regs->sicr),
-			in_be16(&psc_i2s->fifo_regs->rfnum) & 0x1ff,
-			in_be16(&psc_i2s->fifo_regs->rfstat),
-			in_be16(&psc_i2s->fifo_regs->tfnum) & 0x1ff,
-			in_be16(&psc_i2s->fifo_regs->tfstat));
-}
-
-static int *psc_i2s_get_stat_attr(struct psc_i2s *psc_i2s, const char *name)
-{
-	if (strcmp(name, "playback_underrun") == 0)
-		return &psc_i2s->stats.underrun_count;
-	if (strcmp(name, "capture_overrun") == 0)
-		return &psc_i2s->stats.overrun_count;
-
-	return NULL;
-}
-
-static ssize_t psc_i2s_stat_show(struct device *dev,
-				 struct device_attribute *attr, char *buf)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-	int *attrib;
-
-	attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name);
-	if (!attrib)
-		return 0;
-
-	return sprintf(buf, "%i\n", *attrib);
-}
-
-static ssize_t psc_i2s_stat_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf,
-				  size_t count)
-{
-	struct psc_i2s *psc_i2s = dev_get_drvdata(dev);
-	int *attrib;
-
-	attrib = psc_i2s_get_stat_attr(psc_i2s, attr->attr.name);
-	if (!attrib)
-		return 0;
-
-	*attrib = simple_strtoul(buf, NULL, 0);
-	return count;
-}
-
-static DEVICE_ATTR(status, 0644, psc_i2s_status_show, NULL);
-static DEVICE_ATTR(playback_underrun, 0644, psc_i2s_stat_show,
-			psc_i2s_stat_store);
-static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show,
-			psc_i2s_stat_store);
+} };
+EXPORT_SYMBOL_GPL(psc_i2s_dai);
 
 /* ---------------------------------------------------------------------
  * OF platform bus binding code:
@@ -718,150 +156,65 @@ static DEVICE_ATTR(capture_overrun, 0644, psc_i2s_stat_show,
 static int __devinit psc_i2s_of_probe(struct of_device *op,
 				      const struct of_device_id *match)
 {
-	phys_addr_t fifo;
-	struct psc_i2s *psc_i2s;
-	struct resource res;
-	int size, psc_id, irq, rc;
-	const __be32 *prop;
-	void __iomem *regs;
-
-	dev_dbg(&op->dev, "probing psc i2s device\n");
-
-	/* Get the PSC ID */
-	prop = of_get_property(op->node, "cell-index", &size);
-	if (!prop || size < sizeof *prop)
-		return -ENODEV;
-	psc_id = be32_to_cpu(*prop);
-
-	/* Fetch the registers and IRQ of the PSC */
-	irq = irq_of_parse_and_map(op->node, 0);
-	if (of_address_to_resource(op->node, 0, &res)) {
-		dev_err(&op->dev, "Missing reg property\n");
-		return -ENODEV;
-	}
-	regs = ioremap(res.start, 1 + res.end - res.start);
-	if (!regs) {
-		dev_err(&op->dev, "Could not map registers\n");
-		return -ENODEV;
-	}
+	int rc;
+	struct psc_dma *psc_dma;
+	struct mpc52xx_psc __iomem *regs;
 
-	/* Allocate and initialize the driver private data */
-	psc_i2s = kzalloc(sizeof *psc_i2s, GFP_KERNEL);
-	if (!psc_i2s) {
-		iounmap(regs);
-		return -ENOMEM;
-	}
-	spin_lock_init(&psc_i2s->lock);
-	psc_i2s->irq = irq;
-	psc_i2s->psc_regs = regs;
-	psc_i2s->fifo_regs = regs + sizeof *psc_i2s->psc_regs;
-	psc_i2s->dev = &op->dev;
-	psc_i2s->playback.psc_i2s = psc_i2s;
-	psc_i2s->capture.psc_i2s = psc_i2s;
-	snprintf(psc_i2s->name, sizeof psc_i2s->name, "PSC%u", psc_id+1);
-
-	/* Fill out the CPU DAI structure */
-	memcpy(&psc_i2s->dai, &psc_i2s_dai_template, sizeof psc_i2s->dai);
-	psc_i2s->dai.private_data = psc_i2s;
-	psc_i2s->dai.name = psc_i2s->name;
-	psc_i2s->dai.id = psc_id;
-
-	/* Find the address of the fifo data registers and setup the
-	 * DMA tasks */
-	fifo = res.start + offsetof(struct mpc52xx_psc, buffer.buffer_32);
-	psc_i2s->capture.bcom_task =
-		bcom_psc_gen_bd_rx_init(psc_id, 10, fifo, 512);
-	psc_i2s->playback.bcom_task =
-		bcom_psc_gen_bd_tx_init(psc_id, 10, fifo);
-	if (!psc_i2s->capture.bcom_task ||
-	    !psc_i2s->playback.bcom_task) {
-		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
-		iounmap(regs);
-		kfree(psc_i2s);
-		return -ENODEV;
+	rc = mpc5200_audio_dma_create(op);
+	if (rc != 0)
+		return rc;
+
+	rc = snd_soc_register_dais(psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
+	if (rc != 0) {
+		pr_err("Failed to register DAI\n");
+		return 0;
 	}
 
-	/* Disable all interrupts and reset the PSC */
-	out_be16(&psc_i2s->psc_regs->isr_imr.imr, 0);
-	out_8(&psc_i2s->psc_regs->command, 3 << 4); /* reset transmitter */
-	out_8(&psc_i2s->psc_regs->command, 2 << 4); /* reset receiver */
-	out_8(&psc_i2s->psc_regs->command, 1 << 4); /* reset mode */
-	out_8(&psc_i2s->psc_regs->command, 4 << 4); /* reset error */
+	psc_dma = dev_get_drvdata(&op->dev);
+	regs = psc_dma->psc_regs;
 
 	/* Configure the serial interface mode; defaulting to CODEC8 mode */
-	psc_i2s->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
+	psc_dma->sicr = MPC52xx_PSC_SICR_DTS1 | MPC52xx_PSC_SICR_I2S |
 			MPC52xx_PSC_SICR_CLKPOL;
-	if (of_get_property(op->node, "fsl,cellslave", NULL))
-		psc_i2s->sicr |= MPC52xx_PSC_SICR_CELLSLAVE |
-				 MPC52xx_PSC_SICR_GENCLK;
-	out_be32(&psc_i2s->psc_regs->sicr,
-		 psc_i2s->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
+	out_be32(&psc_dma->psc_regs->sicr,
+		 psc_dma->sicr | MPC52xx_PSC_SICR_SIM_CODEC_8);
 
 	/* Check for the codec handle.  If it is not present then we
 	 * are done */
 	if (!of_get_property(op->node, "codec-handle", NULL))
 		return 0;
 
-	/* Set up mode register;
-	 * First write: RxRdy (FIFO Alarm) generates rx FIFO irq
-	 * Second write: register Normal mode for non loopback
-	 */
-	out_8(&psc_i2s->psc_regs->mode, 0);
-	out_8(&psc_i2s->psc_regs->mode, 0);
-
-	/* Set the TX and RX fifo alarm thresholds */
-	out_be16(&psc_i2s->fifo_regs->rfalarm, 0x100);
-	out_8(&psc_i2s->fifo_regs->rfcntl, 0x4);
-	out_be16(&psc_i2s->fifo_regs->tfalarm, 0x100);
-	out_8(&psc_i2s->fifo_regs->tfcntl, 0x7);
-
-	/* Lookup the IRQ numbers */
-	psc_i2s->playback.irq =
-		bcom_get_task_irq(psc_i2s->playback.bcom_task);
-	psc_i2s->capture.irq =
-		bcom_get_task_irq(psc_i2s->capture.bcom_task);
-
-	/* Save what we've done so it can be found again later */
-	dev_set_drvdata(&op->dev, psc_i2s);
-
-	/* Register the SYSFS files */
-	rc = device_create_file(psc_i2s->dev, &dev_attr_status);
-	rc |= device_create_file(psc_i2s->dev, &dev_attr_capture_overrun);
-	rc |= device_create_file(psc_i2s->dev, &dev_attr_playback_underrun);
-	if (rc)
-		dev_info(psc_i2s->dev, "error creating sysfs files\n");
-
-	snd_soc_register_platform(&psc_i2s_pcm_soc_platform);
-
-	/* Tell the ASoC OF helpers about it */
-	of_snd_soc_register_platform(&psc_i2s_pcm_soc_platform, op->node,
-				     &psc_i2s->dai);
+	/* Due to errata in the dma mode; need to line up enabling
+	 * the transmitter with a transition on the frame sync
+	 * line */
+
+	/* first make sure it is low */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) != 0)
+		;
+	/* then wait for the transition to high */
+	while ((in_8(&regs->ipcr_acr.ipcr) & 0x80) == 0)
+		;
+	/* Finally, enable the PSC.
+	 * Receiver must always be enabled; even when we only want
+	 * transmit.  (see 15.3.2.3 of MPC5200B User's Guide) */
+
+	/* Go */
+	out_8(&psc_dma->psc_regs->command,
+			MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
 
 	return 0;
+
 }
 
 static int __devexit psc_i2s_of_remove(struct of_device *op)
 {
-	struct psc_i2s *psc_i2s = dev_get_drvdata(&op->dev);
-
-	dev_dbg(&op->dev, "psc_i2s_remove()\n");
-
-	snd_soc_unregister_platform(&psc_i2s_pcm_soc_platform);
-
-	bcom_gen_bd_rx_release(psc_i2s->capture.bcom_task);
-	bcom_gen_bd_tx_release(psc_i2s->playback.bcom_task);
-
-	iounmap(psc_i2s->psc_regs);
-	iounmap(psc_i2s->fifo_regs);
-	kfree(psc_i2s);
-	dev_set_drvdata(&op->dev, NULL);
-
-	return 0;
+	return mpc5200_audio_dma_destroy(op);
 }
 
 /* Match table for of_platform binding */
 static struct of_device_id psc_i2s_match[] __devinitdata = {
 	{ .compatible = "fsl,mpc5200-psc-i2s", },
+	{ .compatible = "fsl,mpc5200b-psc-i2s", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, psc_i2s_match);
@@ -892,4 +245,7 @@ static void __exit psc_i2s_exit(void)
 }
 module_exit(psc_i2s_exit);
 
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("Freescale MPC5200 PSC in I2S mode ASoC Driver");
+MODULE_LICENSE("GPL");
 
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.h b/sound/soc/fsl/mpc5200_psc_i2s.h
new file mode 100644
index 00000000000..ce55e070fdf
--- /dev/null
+++ b/sound/soc/fsl/mpc5200_psc_i2s.h
@@ -0,0 +1,12 @@
+/*
+ * Freescale MPC5200 PSC in I2S mode
+ * ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ */
+
+#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
+#define __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
+
+extern struct snd_soc_dai psc_i2s_dai[];
+
+#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ */
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
new file mode 100644
index 00000000000..8766f7a3893
--- /dev/null
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -0,0 +1,90 @@
+/*
+ * Phytec pcm030 driver for the PSC of the Freescale MPC52xx
+ * configured as AC97 interface
+ *
+ * Copyright 2008 Jon Smirl, Digispeaker
+ * Author: Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-of-simple.h>
+
+#include "mpc5200_dma.h"
+#include "mpc5200_psc_ac97.h"
+#include "../codecs/wm9712.h"
+
+static struct snd_soc_device device;
+static struct snd_soc_card card;
+
+static struct snd_soc_dai_link pcm030_fabric_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 Analog",
+	.codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_NORMAL],
+},
+{
+	.name = "AC97",
+	.stream_name = "AC97 IEC958",
+	.codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
+	.cpu_dai = &psc_ac97_dai[MPC5200_AC97_SPDIF],
+},
+};
+
+static __init int pcm030_fabric_init(void)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	if (!machine_is_compatible("phytec,pcm030"))
+		return -ENODEV;
+
+	card.platform = &mpc5200_audio_dma_platform;
+	card.name = "pcm030";
+	card.dai_link = pcm030_fabric_dai;
+	card.num_links = ARRAY_SIZE(pcm030_fabric_dai);
+
+	device.card = &card;
+	device.codec_dev = &soc_codec_dev_wm9712;
+
+	pdev = platform_device_alloc("soc-audio", 1);
+	if (!pdev) {
+		pr_err("pcm030_fabric_init: platform_device_alloc() failed\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, &device);
+	device.dev = &pdev->dev;
+
+	rc = platform_device_add(pdev);
+	if (rc) {
+		pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+module_init(pcm030_fabric_init);
+
+
+MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
+MODULE_DESCRIPTION(DRV_NAME ": mpc5200 pcm030 fabric driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 675732e724d..b771238662b 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -39,6 +39,14 @@ config SND_OMAP_SOC_OMAP2EVM
 	help
 	  Say Y if you want to add support for SoC audio on the omap2evm board.
 
+config SND_OMAP_SOC_OMAP3EVM
+	tristate "SoC Audio support for OMAP3EVM board"
+	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TWL4030
+	help
+	  Say Y if you want to add support for SoC audio on the omap3evm board.
+
 config SND_OMAP_SOC_SDP3430
 	tristate "SoC Audio support for Texas Instruments SDP3430"
 	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 0c9e4ac3766..a37f4986238 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -10,6 +10,7 @@ snd-soc-n810-objs := n810.o
 snd-soc-osk5912-objs := osk5912.o
 snd-soc-overo-objs := overo.o
 snd-soc-omap2evm-objs := omap2evm.o
+snd-soc-omap3evm-objs := omap3evm.o
 snd-soc-sdp3430-objs := sdp3430.o
 snd-soc-omap3pandora-objs := omap3pandora.o
 snd-soc-omap3beagle-objs := omap3beagle.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
 obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
 obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
 obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
+obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o
 obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 91ef17992de..b60b1dfbc43 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -383,10 +383,9 @@ static int __init n810_soc_init(void)
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
 
-	if (gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0)
-		BUG();
-	if (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0)
-		BUG();
+	BUG_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) ||
+	       (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0));
+
 	gpio_direction_output(N810_HEADSET_AMP_GPIO, 0);
 	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
 
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 91261428384..a5d46a7b196 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -215,8 +215,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
-	int wlen, channels;
+	int wlen, channels, wpf;
 	unsigned long port;
+	unsigned int format;
 
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
@@ -244,18 +245,24 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 		return 0;
 	}
 
-	channels = params_channels(params);
+	format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+	wpf = channels = params_channels(params);
 	switch (channels) {
 	case 2:
-		/* Use dual-phase frames */
-		regs->rcr2	|= RPHASE;
-		regs->xcr2	|= XPHASE;
+		if (format == SND_SOC_DAIFMT_I2S) {
+			/* Use dual-phase frames */
+			regs->rcr2	|= RPHASE;
+			regs->xcr2	|= XPHASE;
+			/* Set 1 word per (McBSP) frame for phase1 and phase2 */
+			wpf--;
+			regs->rcr2	|= RFRLEN2(wpf - 1);
+			regs->xcr2	|= XFRLEN2(wpf - 1);
+		}
 	case 1:
-		/* Set 1 word per (McBSP) frame */
-		regs->rcr2	|= RFRLEN2(1 - 1);
-		regs->rcr1	|= RFRLEN1(1 - 1);
-		regs->xcr2	|= XFRLEN2(1 - 1);
-		regs->xcr1	|= XFRLEN1(1 - 1);
+	case 4:
+		/* Set word per (McBSP) frame for phase1 */
+		regs->rcr1	|= RFRLEN1(wpf - 1);
+		regs->xcr1	|= XFRLEN1(wpf - 1);
 		break;
 	default:
 		/* Unsupported number of channels */
@@ -277,11 +284,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Set FS period and length in terms of bit clock periods */
-	switch (mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	switch (format) {
 	case SND_SOC_DAIFMT_I2S:
-		regs->srgr2	|= FPER(wlen * 2 - 1);
+		regs->srgr2	|= FPER(wlen * channels - 1);
 		regs->srgr1	|= FWID(wlen - 1);
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
 	case SND_SOC_DAIFMT_DSP_B:
 		regs->srgr2	|= FPER(wlen * channels - 1);
 		regs->srgr1	|= FWID(0);
@@ -326,6 +334,13 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		regs->rcr2	|= RDATDLY(1);
 		regs->xcr2	|= XDATDLY(1);
 		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/* 1-bit data delay */
+		regs->rcr2      |= RDATDLY(1);
+		regs->xcr2      |= XDATDLY(1);
+		/* Invert FS polarity configuration */
+		temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
+		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		/* 0-bit data delay */
 		regs->rcr2      |= RDATDLY(0);
@@ -492,13 +507,13 @@ static struct snd_soc_dai_ops omap_mcbsp_dai_ops = {
 	.id = (link_id),					\
 	.playback = {						\
 		.channels_min = 1,				\
-		.channels_max = 2,				\
+		.channels_max = 4,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
 	.capture = {						\
 		.channels_min = 1,				\
-		.channels_max = 2,				\
+		.channels_max = 4,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 07cf7f46b58..6454e15f7d2 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -87,8 +87,10 @@ static int omap_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct omap_pcm_dma_data *dma_data = rtd->dai->cpu_dai->dma_data;
 	int err = 0;
 
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
 	if (!dma_data)
-		return -ENODEV;
+		return 0;
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 	runtime->dma_bytes = params_buffer_bytes(params);
@@ -134,6 +136,11 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream)
 	struct omap_pcm_dma_data *dma_data = prtd->dma_data;
 	struct omap_dma_channel_params dma_params;
 
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->dma_data)
+		return 0;
+
 	memset(&dma_params, 0, sizeof(dma_params));
 	/*
 	 * Note: Regardless of interface data formats supported by OMAP McBSP
diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c
index 0c2322dcf02..027e1a40f8a 100644
--- a/sound/soc/omap/omap2evm.c
+++ b/sound/soc/omap/omap2evm.c
@@ -86,7 +86,7 @@ static struct snd_soc_dai_link omap2evm_dai = {
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &omap2evm_ops,
 };
 
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index fd24a4acd2f..b0cff9f33b7 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -41,23 +41,33 @@ static int omap3beagle_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int fmt;
 	int ret;
 
+	switch (params_channels(params)) {
+	case 2: /* Stereo I2S mode */
+		fmt =	SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	case 4: /* Four channel TDM mode */
+		fmt =	SND_SOC_DAIFMT_DSP_A |
+			SND_SOC_DAIFMT_IB_NF |
+			SND_SOC_DAIFMT_CBM_CFM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	/* Set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai,
-				  SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
 	if (ret < 0) {
 		printk(KERN_ERR "can't set codec DAI configuration\n");
 		return ret;
 	}
 
 	/* Set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai,
-				  SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
 	if (ret < 0) {
 		printk(KERN_ERR "can't set cpu DAI configuration\n");
 		return ret;
@@ -83,7 +93,7 @@ static struct snd_soc_dai_link omap3beagle_dai = {
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &omap3beagle_ops,
 };
 
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
new file mode 100644
index 00000000000..9114c263077
--- /dev/null
+++ b/sound/soc/omap/omap3evm.c
@@ -0,0 +1,147 @@
+/*
+ * omap3evm.c  -- ALSA SoC support for OMAP3 EVM
+ *
+ * Author: Anuj Aggarwal <anuj.aggarwal@ti.com>
+ *
+ * Based on sound/soc/omap/beagle.c by Steve Sakoman
+ *
+ * Copyright (C) 2008 Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int omap3evm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "Can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops omap3evm_ops = {
+	.hw_params = omap3evm_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap3evm_dai = {
+	.name 		= "TWL4030",
+	.stream_name 	= "TWL4030",
+	.cpu_dai 	= &omap_mcbsp_dai[0],
+	.codec_dai 	= &twl4030_dai[TWL4030_DAI_HIFI],
+	.ops 		= &omap3evm_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_omap3evm = {
+	.name = "omap3evm",
+	.platform = &omap_soc_platform,
+	.dai_link = &omap3evm_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap3evm_snd_devdata = {
+	.card = &snd_soc_omap3evm,
+	.codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap3evm_snd_device;
+
+static int __init omap3evm_soc_init(void)
+{
+	int ret;
+
+	if (!machine_is_omap3evm()) {
+		pr_err("Not OMAP3 EVM!\n");
+		return -ENODEV;
+	}
+	pr_info("OMAP3 EVM SoC init\n");
+
+	omap3evm_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!omap3evm_snd_device) {
+		printk(KERN_ERR "Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata);
+	omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev;
+	*(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1;
+
+	ret = platform_device_add(omap3evm_snd_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	printk(KERN_ERR "Unable to add platform device\n");
+	platform_device_put(omap3evm_snd_device);
+
+	return ret;
+}
+
+static void __exit omap3evm_soc_exit(void)
+{
+	platform_device_unregister(omap3evm_snd_device);
+}
+
+module_init(omap3evm_soc_init);
+module_exit(omap3evm_soc_exit);
+
+MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
+MODULE_LICENSE("GPLv2");
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index fe282d4ef42..ad219aaf7cb 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -228,14 +228,14 @@ static struct snd_soc_dai_link omap3pandora_dai[] = {
 		.name = "PCM1773",
 		.stream_name = "HiFi Out",
 		.cpu_dai = &omap_mcbsp_dai[0],
-		.codec_dai = &twl4030_dai,
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 		.ops = &omap3pandora_out_ops,
 		.init = omap3pandora_out_init,
 	}, {
 		.name = "TWL4030",
 		.stream_name = "Line/Mic In",
 		.cpu_dai = &omap_mcbsp_dai[1],
-		.codec_dai = &twl4030_dai,
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 		.ops = &omap3pandora_in_ops,
 		.init = omap3pandora_in_init,
 	}
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index a72dc4e159e..ec4f8fd8b3a 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -83,7 +83,7 @@ static struct snd_soc_dai_link overo_dai = {
 	.name = "TWL4030",
 	.stream_name = "TWL4030",
 	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
 	.ops = &overo_ops,
 };
 
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 10f1c867f11..b719e5db4f5 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -84,6 +84,49 @@ static struct snd_soc_ops sdp3430_ops = {
 	.hw_params = sdp3430_hw_params,
 };
 
+static int sdp3430_hw_voice_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				SND_SOC_DAIFMT_DSP_A |
+				SND_SOC_DAIFMT_IB_NF |
+				SND_SOC_DAIFMT_CBS_CFM);
+	if (ret) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				SND_SOC_DAIFMT_DSP_A |
+				SND_SOC_DAIFMT_IB_NF |
+				SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+					    SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops sdp3430_voice_ops = {
+	.hw_params = sdp3430_hw_voice_params,
+};
+
 /* Headset jack */
 static struct snd_soc_jack hs_jack;
 
@@ -192,28 +235,58 @@ static int sdp3430_twl4030_init(struct snd_soc_codec *codec)
 	return ret;
 }
 
+static int sdp3430_twl4030_voice_init(struct snd_soc_codec *codec)
+{
+	unsigned short reg;
+
+	/* Enable voice interface */
+	reg = codec->read(codec, TWL4030_REG_VOICE_IF);
+	reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN;
+	codec->write(codec, TWL4030_REG_VOICE_IF, reg);
+
+	return 0;
+}
+
+
 /* Digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link sdp3430_dai = {
-	.name = "TWL4030",
-	.stream_name = "TWL4030",
-	.cpu_dai = &omap_mcbsp_dai[0],
-	.codec_dai = &twl4030_dai,
-	.init = sdp3430_twl4030_init,
-	.ops = &sdp3430_ops,
+static struct snd_soc_dai_link sdp3430_dai[] = {
+	{
+		.name = "TWL4030 I2S",
+		.stream_name = "TWL4030 Audio",
+		.cpu_dai = &omap_mcbsp_dai[0],
+		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+		.init = sdp3430_twl4030_init,
+		.ops = &sdp3430_ops,
+	},
+	{
+		.name = "TWL4030 PCM",
+		.stream_name = "TWL4030 Voice",
+		.cpu_dai = &omap_mcbsp_dai[1],
+		.codec_dai = &twl4030_dai[TWL4030_DAI_VOICE],
+		.init = sdp3430_twl4030_voice_init,
+		.ops = &sdp3430_voice_ops,
+	},
 };
 
 /* Audio machine driver */
 static struct snd_soc_card snd_soc_sdp3430 = {
 	.name = "SDP3430",
 	.platform = &omap_soc_platform,
-	.dai_link = &sdp3430_dai,
-	.num_links = 1,
+	.dai_link = sdp3430_dai,
+	.num_links = ARRAY_SIZE(sdp3430_dai),
+};
+
+/* twl4030 setup */
+static struct twl4030_setup_data twl4030_setup = {
+	.ramp_delay_value = 3,
+	.sysclk = 26000,
 };
 
 /* Audio subsystem */
 static struct snd_soc_device sdp3430_snd_devdata = {
 	.card = &snd_soc_sdp3430,
 	.codec_dev = &soc_codec_dev_twl4030,
+	.codec_data = &twl4030_setup,
 };
 
 static struct platform_device *sdp3430_snd_device;
@@ -236,7 +309,8 @@ static int __init sdp3430_soc_init(void)
 
 	platform_set_drvdata(sdp3430_snd_device, &sdp3430_snd_devdata);
 	sdp3430_snd_devdata.dev = &sdp3430_snd_device->dev;
-	*(unsigned int *)sdp3430_dai.cpu_dai->private_data = 1; /* McBSP2 */
+	*(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
+	*(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
 
 	ret = platform_device_add(sdp3430_snd_device);
 	if (ret)
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index ad8a10fe629..6375b4ea525 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -89,22 +89,23 @@ config SND_PXA2XX_SOC_E800
 	  Toshiba e800 PDA
 
 config SND_PXA2XX_SOC_EM_X270
-	tristate "SoC Audio support for CompuLab EM-x270"
+	tristate "SoC Audio support for CompuLab EM-x270, eXeda and CM-X300"
 	depends on SND_PXA2XX_SOC && MACH_EM_X270
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  CompuLab EM-x270.
+	  CompuLab EM-x270, eXeda and CM-X300 machines.
 
 config SND_PXA2XX_SOC_PALM27X
-	bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
-	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+	bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive"
+	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
+			MACH_PALMT5 || MACH_PALMTE2)
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  Palm T|X, T5 or LifeDrive handheld computer.
+	  Palm T|X, T5, E2 or LifeDrive handheld computer.
 
 config SND_SOC_ZYLONITE
 	tristate "SoC Audio support for Marvell Zylonite"
@@ -134,3 +135,12 @@ config SND_PXA2XX_SOC_MIOA701
         help
           Say Y if you want to add support for SoC audio on the
           MIO A701.
+
+config SND_PXA2XX_SOC_IMOTE2
+       tristate "SoC Audio support for IMote 2"
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       select SND_PXA2XX_SOC_I2S
+       select SND_SOC_WM8940
+       help
+         Say Y if you want to add support for SoC audio on the
+	 IMote 2.
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index 4b90c3ccae4..6e096b48033 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o
 snd-soc-zylonite-objs := zylonite.o
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-imote2-objs := imote2.o
 
 obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
 obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
@@ -35,3 +36,4 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
+obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index 949be9c2a01..f4756e4025f 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * em-x270.c  --  SoC audio for EM-X270
+ * SoC audio driver for EM-X270, eXeda and CM-X300
  *
- * Copyright 2007 CompuLab, Ltd.
+ * Copyright 2007, 2009 CompuLab, Ltd.
  *
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
@@ -68,7 +68,8 @@ static int __init em_x270_init(void)
 {
 	int ret;
 
-	if (!machine_is_em_x270())
+	if (!(machine_is_em_x270() || machine_is_exeda()
+	      || machine_is_cm_x300()))
 		return -ENODEV;
 
 	em_x270_snd_device = platform_device_alloc("soc-audio", -1);
@@ -95,5 +96,5 @@ module_exit(em_x270_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mike Rapoport");
-MODULE_DESCRIPTION("ALSA SoC EM-X270");
+MODULE_DESCRIPTION("ALSA SoC EM-X270, eXeda and CM-X300");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c
new file mode 100644
index 00000000000..405587a0116
--- /dev/null
+++ b/sound/soc/pxa/imote2.c
@@ -0,0 +1,114 @@
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8940.h"
+#include "pxa2xx-i2s.h"
+#include "pxa2xx-pcm.h"
+
+static int imote2_asoc_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* CPU should be clock master */
+	ret = snd_soc_dai_set_fmt(cpu_dai,  SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk,
+		SND_SOC_CLOCK_OUT);
+
+	return ret;
+}
+
+static struct snd_soc_ops imote2_asoc_ops = {
+	.hw_params = imote2_asoc_hw_params,
+};
+
+static struct snd_soc_dai_link imote2_dai = {
+	.name = "WM8940",
+	.stream_name = "WM8940",
+	.cpu_dai = &pxa_i2s_dai,
+	.codec_dai = &wm8940_dai,
+	.ops = &imote2_asoc_ops,
+};
+
+static struct snd_soc_card snd_soc_imote2 = {
+	.name = "Imote2",
+	.platform = &pxa2xx_soc_platform,
+	.dai_link = &imote2_dai,
+	.num_links = 1,
+};
+
+static struct snd_soc_device imote2_snd_devdata = {
+	.card = &snd_soc_imote2,
+	.codec_dev = &soc_codec_dev_wm8940,
+};
+
+static struct platform_device *imote2_snd_device;
+
+static int __init imote2_asoc_init(void)
+{
+	int ret;
+
+	if (!machine_is_intelmote2())
+		return -ENODEV;
+	imote2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!imote2_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(imote2_snd_device, &imote2_snd_devdata);
+	imote2_snd_devdata.dev = &imote2_snd_device->dev;
+	ret = platform_device_add(imote2_snd_device);
+	if (ret)
+		platform_device_put(imote2_snd_device);
+
+	return ret;
+}
+module_init(imote2_asoc_init);
+
+static void __exit imote2_asoc_exit(void)
+{
+	platform_device_unregister(imote2_snd_device);
+}
+module_exit(imote2_asoc_exit);
+
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_DESCRIPTION("ALSA SoC Imote 2");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 0625c342a1c..c89a3cdf31e 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -106,7 +106,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 513156 Hz ~= _2_ * 8000 Hz * 32 (+0.23%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_16;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 1026312 Hz ~= _2_ * 8000 Hz * 64 (+0.23%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_8;
 		}
@@ -118,7 +118,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 351375 Hz ~= 11025 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_4;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 702750 Hz ~= 11025 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 		}
@@ -130,7 +130,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 702750 Hz ~= 22050 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 1405500 Hz ~= 22050 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
@@ -142,7 +142,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 1405500 Hz ~= 44100 Hz * 32 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 2811000 Hz ~= 44100 Hz * 64 (-0.41%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
@@ -154,19 +154,20 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 			/* 1529375 Hz ~= 48000 Hz * 32 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 3058750 Hz ~= 48000 Hz * 64 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 		}
 		break;
 	case 96000:
+	default:
 		acps = 12235000;
 		switch (width) {
 		case 16:
 			/* 3058750 Hz ~= 96000 Hz * 32 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_1;
 			break;
-		case 32:
+		default: /* 32 */
 			/* 6117500 Hz ~= 96000 Hz * 64 (-0.44%) */
 			acds = PXA_SSP_CLK_AUDIO_DIV_2;
 			div4 = PXA_SSP_CLK_SCDB_1;
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 44fcc4e01e0..e6102fda0a7 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!(machine_is_palmtx() || machine_is_palmt5() ||
-		machine_is_palmld()))
+		machine_is_palmld() || machine_is_palmte2()))
 		return -ENODEV;
 
 	if (pdev->dev.platform_data)
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 286be31545d..19c45409d94 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -50,139 +50,6 @@ struct ssp_priv {
 #endif
 };
 
-#define PXA2xx_SSP1_BASE	0x41000000
-#define PXA27x_SSP2_BASE	0x41700000
-#define PXA27x_SSP3_BASE	0x41900000
-#define PXA3xx_SSP4_BASE	0x41a00000
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
-	.name			= "SSP1 PCM Mono out",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(14),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
-	.name			= "SSP1 PCM Mono in",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(13),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
-	.name			= "SSP1 PCM Stereo out",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(14),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
-	.name			= "SSP1 PCM Stereo in",
-	.dev_addr		= PXA2xx_SSP1_BASE + SSDR,
-	.drcmr			= &DRCMR(13),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
-	.name			= "SSP2 PCM Mono out",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(16),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
-	.name			= "SSP2 PCM Mono in",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(15),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
-	.name			= "SSP2 PCM Stereo out",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(16),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
-	.name			= "SSP2 PCM Stereo in",
-	.dev_addr		= PXA27x_SSP2_BASE + SSDR,
-	.drcmr			= &DRCMR(15),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
-	.name			= "SSP3 PCM Mono out",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
-	.name			= "SSP3 PCM Mono in",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
-	.name			= "SSP3 PCM Stereo out",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
-	.name			= "SSP3 PCM Stereo in",
-	.dev_addr		= PXA27x_SSP3_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
-	.name			= "SSP4 PCM Mono out",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
-	.name			= "SSP4 PCM Mono in",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
-	.name			= "SSP4 PCM Stereo out",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(67),
-	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
-	.name			= "SSP4 PCM Stereo in",
-	.dev_addr		= PXA3xx_SSP4_BASE + SSDR,
-	.drcmr			= &DRCMR(66),
-	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
-				  DCMD_BURST16 | DCMD_WIDTH4,
-};
-
 static void dump_registers(struct ssp_device *ssp)
 {
 	dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
@@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp)
 		 ssp_read_reg(ssp, SSACD));
 }
 
-static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
-	{
-		&pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
-		&pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
-		&pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
-		&pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
-	},
-	{
-		&pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
-		&pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
-	},
+struct pxa2xx_pcm_dma_data {
+	struct pxa2xx_pcm_dma_params params;
+	char name[20];
 };
 
+static struct pxa2xx_pcm_dma_params *
+ssp_get_dma_params(struct ssp_device *ssp, int width4, int out)
+{
+	struct pxa2xx_pcm_dma_data *dma;
+
+	dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
+	if (dma == NULL)
+		return NULL;
+
+	snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
+			width4 ? "32-bit" : "16-bit", out ? "out" : "in");
+
+	dma->params.name = dma->name;
+	dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
+	dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
+				  (DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
+			(width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
+	dma->params.dev_addr = ssp->phys_base + SSDR;
+
+	return &dma->params;
+}
+
 static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
@@ -227,6 +102,11 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 		clk_enable(priv->dev.ssp->clk);
 		ssp_disable(&priv->dev);
 	}
+
+	if (cpu_dai->dma_data) {
+		kfree(cpu_dai->dma_data);
+		cpu_dai->dma_data = NULL;
+	}
 	return ret;
 }
 
@@ -241,6 +121,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
 		ssp_disable(&priv->dev);
 		clk_disable(priv->dev.ssp->clk);
 	}
+
+	if (cpu_dai->dma_data) {
+		kfree(cpu_dai->dma_data);
+		cpu_dai->dma_data = NULL;
+	}
 }
 
 #ifdef CONFIG_PM
@@ -323,7 +208,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 		~(SSCR0_ECS |  SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
 
 	dev_dbg(&ssp->pdev->dev,
-		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n",
+		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
 		cpu_dai->id, clk_id, freq);
 
 	switch (clk_id) {
@@ -472,7 +357,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai,
 			ssacd |= (0x6 << 4);
 
 			dev_dbg(&ssp->pdev->dev,
-				"Using SSACDD %x to supply %dHz\n",
+				"Using SSACDD %x to supply %uHz\n",
 				val, freq_out);
 			break;
 		}
@@ -589,7 +474,10 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		case SND_SOC_DAIFMT_NB_IF:
 			break;
 		case SND_SOC_DAIFMT_IB_IF:
-			sspsp |= SSPSP_SCMODE(3);
+			sspsp |= SSPSP_SCMODE(2);
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
 			break;
 		default:
 			return -EINVAL;
@@ -606,7 +494,13 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		case SND_SOC_DAIFMT_NB_NF:
 			sspsp |= SSPSP_SFRMP;
 			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			break;
 		case SND_SOC_DAIFMT_IB_IF:
+			sspsp |= SSPSP_SCMODE(2);
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
 			break;
 		default:
 			return -EINVAL;
@@ -644,25 +538,23 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
 	struct ssp_device *ssp = priv->dev.ssp;
-	int dma = 0, chn = params_channels(params);
+	int chn = params_channels(params);
 	u32 sscr0;
 	u32 sspsp;
 	int width = snd_pcm_format_physical_width(params_format(params));
 	int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
 
-	/* select correct DMA params */
-	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
-		dma = 1; /* capture DMA offset is 1,3 */
+	/* generate correct DMA params */
+	if (cpu_dai->dma_data)
+		kfree(cpu_dai->dma_data);
+
 	/* Network mode with one active slot (ttsa == 1) can be used
 	 * to force 16-bit frame width on the wire (for S16_LE), even
 	 * with two channels. Use 16-bit DMA transfers for this case.
 	 */
-	if (((chn == 2) && (ttsa != 1)) || (width == 32))
-		dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */
-
-	cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
-
-	dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
+	cpu_dai->dma_data = ssp_get_dma_params(ssp,
+			((chn == 2) && (ttsa != 1)) || (width == 32),
+			substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
 
 	/* we can only change the settings if the port is not in use */
 	if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 2f4b6e489b7..4743e262895 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -106,10 +106,8 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
 
-	if (!cpu_dai->active) {
-		SACR0 |= SACR0_RST;
+	if (!cpu_dai->active)
 		SACR0 = 0;
-	}
 
 	return 0;
 }
@@ -178,9 +176,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	/* is port used by another stream */
 	if (!(SACR0 & SACR0_ENB)) {
-
 		SACR0 = 0;
-		SACR1 = 0;
 		if (pxa_i2s.master)
 			SACR0 |= SACR0_BCKD;
 
@@ -226,6 +222,10 @@ static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			SACR1 &= ~SACR1_DRPL;
+		else
+			SACR1 &= ~SACR1_DREC;
 		SACR0 |= SACR0_ENB;
 		break;
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -252,21 +252,16 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream,
 		SAIMR &= ~SAIMR_RFS;
 	}
 
-	if (SACR1 & (SACR1_DREC | SACR1_DRPL)) {
+	if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
 		SACR0 &= ~SACR0_ENB;
 		pxa_i2s_wait();
 		clk_disable(clk_i2s);
 	}
-
-	clk_put(clk_i2s);
 }
 
 #ifdef CONFIG_PM
 static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
 {
-	if (!dai->active)
-		return 0;
-
 	/* store registers */
 	pxa_i2s.sacr0 = SACR0;
 	pxa_i2s.sacr1 = SACR1;
@@ -281,16 +276,14 @@ static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
 
 static int pxa2xx_i2s_resume(struct snd_soc_dai *dai)
 {
-	if (!dai->active)
-		return 0;
-
 	pxa_i2s_wait();
 
-	SACR0 = pxa_i2s.sacr0 &= ~SACR0_ENB;
+	SACR0 = pxa_i2s.sacr0 & ~SACR0_ENB;
 	SACR1 = pxa_i2s.sacr1;
 	SAIMR = pxa_i2s.saimr;
 	SADIV = pxa_i2s.sadiv;
-	SACR0 |= SACR0_ENB;
+
+	SACR0 = pxa_i2s.sacr0;
 
 	return 0;
 }
@@ -329,6 +322,7 @@ struct snd_soc_dai pxa_i2s_dai = {
 		.rates = PXA2XX_I2S_RATES,
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
 	.ops = &pxa_i2s_dai_ops,
+	.symmetric_rates = 1,
 };
 
 EXPORT_SYMBOL_GPL(pxa_i2s_dai);
@@ -346,6 +340,19 @@ static int pxa2xx_i2s_probe(struct platform_device *dev)
 	if (ret != 0)
 		clk_put(clk_i2s);
 
+	/*
+	 * PXA Developer's Manual:
+	 * If SACR0[ENB] is toggled in the middle of a normal operation,
+	 * the SACR0[RST] bit must also be set and cleared to reset all
+	 * I2S controller registers.
+	 */
+	SACR0 = SACR0_RST;
+	SACR0 = 0;
+	/* Make sure RPL and REC are disabled */
+	SACR1 = SACR1_DRPL | SACR1_DREC;
+	/* Along with FIFO servicing */
+	SAIMR &= ~(SAIMR_RFS | SAIMR_TFS);
+
 	return ret;
 }
 
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 289fadf60b1..906709e6dd5 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -345,9 +345,11 @@ static void lm4857_write_regs(void)
 static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
-	int reg = kcontrol->private_value & 0xFF;
-	int shift = (kcontrol->private_value >> 8) & 0x0F;
-	int mask = (kcontrol->private_value >> 16) & 0xFF;
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -358,9 +360,11 @@ static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
 static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
-	int reg = kcontrol->private_value & 0xFF;
-	int shift = (kcontrol->private_value >> 8) & 0x0F;
-	int mask = (kcontrol->private_value >> 16) & 0xFF;
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
 
 	if (((lm4857_regs[reg] >> shift) & mask) ==
 		ucontrol->value.integer.value[0])
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index ab680aac3fc..1a283170ca9 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -37,6 +37,20 @@
 
 #include "s3c-i2s-v2.h"
 
+#undef S3C_IIS_V2_SUPPORTED
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifndef S3C_IIS_V2_SUPPORTED
+#error Unsupported CPU model
+#endif
+
 #define S3C2412_I2S_DEBUG_CON 0
 
 static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
@@ -75,7 +89,7 @@ static inline void dbg_showcon(const char *fn, u32 con)
 
 
 /* Turn on or off the transmission path. */
-void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
+static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 {
 	void __iomem *regs = i2s->regs;
 	u32 fic, con, mod;
@@ -105,7 +119,9 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
 		}
 
 		writel(con, regs + S3C2412_IISCON);
@@ -132,7 +148,9 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
 		}
 
 		writel(mod, regs + S3C2412_IISMOD);
@@ -143,9 +161,8 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
 	dbg_showcon(__func__, con);
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
-EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl);
 
-void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
+static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 {
 	void __iomem *regs = i2s->regs;
 	u32 fic, con, mod;
@@ -175,7 +192,8 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
 		}
 
 		writel(mod, regs + S3C2412_IISMOD);
@@ -199,7 +217,8 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 			break;
 
 		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n");
+			dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
 		}
 
 		writel(con, regs + S3C2412_IISCON);
@@ -209,7 +228,6 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 	fic = readl(regs + S3C2412_IISFIC);
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
-EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl);
 
 /*
  * Wait for the LR signal to allow synchronisation to the L/R clock
@@ -266,7 +284,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
  */
 #define IISMOD_MASTER_MASK (1 << 11)
 #define IISMOD_SLAVE (1 << 11)
-#define IISMOD_MASTER (0x0)
+#define IISMOD_MASTER (0 << 11)
 #endif
 
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -281,7 +299,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		iismod |= IISMOD_MASTER;
 		break;
 	default:
-		pr_debug("unknwon master/slave format\n");
+		pr_err("unknwon master/slave format\n");
 		return -EINVAL;
 	}
 
@@ -298,7 +316,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
 		iismod |= S3C2412_IISMOD_SDF_IIS;
 		break;
 	default:
-		pr_debug("Unknown data format\n");
+		pr_err("Unknown data format\n");
 		return -EINVAL;
 	}
 
@@ -327,6 +345,7 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 	iismod = readl(i2s->regs + S3C2412_IISMOD);
 	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
 
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S8:
 		iismod |= S3C2412_IISMOD_8BIT;
@@ -335,6 +354,25 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 		iismod &= ~S3C2412_IISMOD_8BIT;
 		break;
 	}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+	iismod &= ~0x606;
+	/* Sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		/* 8 bit sample, 16fs BCLK */
+		iismod |= 0x2004;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		/* 16 bit sample, 32fs BCLK */
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		/* 24 bit sample, 48fs BCLK */
+		iismod |= 0x4002;
+		break;
+	}
+#endif
 
 	writel(iismod, i2s->regs + S3C2412_IISMOD);
 	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
@@ -489,6 +527,8 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 	unsigned int best_rate = 0;
 	unsigned int best_deviation = INT_MAX;
 
+	pr_debug("Input clock rate %ldHz\n", clkrate);
+
 	if (fstab == NULL)
 		fstab = iis_fs_tab;
 
@@ -507,7 +547,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 		actual = clkrate / (fsdiv * div);
 		deviation = actual - rate;
 
-		printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n",
+		printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
 		       fsdiv, div, actual, deviation);
 
 		deviation = abs(deviation);
@@ -523,7 +563,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 			break;
 	}
 
-	printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n",
+	printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
 	       best_fs, best_div, best_rate);
 
 	info->fs_div = best_fs;
@@ -539,12 +579,31 @@ int s3c_i2sv2_probe(struct platform_device *pdev,
 		    unsigned long base)
 {
 	struct device *dev = &pdev->dev;
+	unsigned int iismod;
 
 	i2s->dev = dev;
 
 	/* record our i2s structure for later use in the callbacks */
 	dai->private_data = i2s;
 
+	if (!base) {
+		struct resource *res = platform_get_resource(pdev,
+							     IORESOURCE_MEM,
+							     0);
+		if (!res) {
+			dev_err(dev, "Unable to get register resource\n");
+			return -ENXIO;
+		}
+
+		if (!request_mem_region(res->start, resource_size(res),
+					"s3c64xx-i2s-v4")) {
+			dev_err(dev, "Unable to request register region\n");
+			return -EBUSY;
+		}
+
+		base = res->start;
+	}
+
 	i2s->regs = ioremap(base, 0x100);
 	if (i2s->regs == NULL) {
 		dev_err(dev, "cannot ioremap registers\n");
@@ -560,12 +619,16 @@ int s3c_i2sv2_probe(struct platform_device *pdev,
 
 	clk_enable(i2s->iis_pclk);
 
+	/* Mark ourselves as in TXRX mode so we can run through our cleanup
+	 * process without warnings. */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	iismod |= S3C2412_IISMOD_MODE_TXRX;
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
 	s3c2412_snd_txctrl(i2s, 0);
 	s3c2412_snd_rxctrl(i2s, 0);
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
 
 #ifdef CONFIG_PM
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index b7e0b3f0bfc..a587ec40b44 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
@@ -120,7 +121,7 @@ static int s3c2412_i2s_probe(struct platform_device *pdev,
 
 	s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk");
 	if (s3c2412_i2s.iis_cclk == NULL) {
-		pr_debug("failed to get i2sclk clock\n");
+		pr_err("failed to get i2sclk clock\n");
 		iounmap(s3c2412_i2s.regs);
 		return -ENODEV;
 	}
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3698f707c44..3f03d5ddfac 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 
 #include <sound/core.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index cc066964dad..556e35f0ab7 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -21,6 +21,8 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 169ddad3157..eecfa5eba06 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
 	 * sync to pclk, half-word transfers to the IIS-FIFO. */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		s3c2410_dma_devconfig(prtd->params->channel,
-				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
-				S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_SYNC_PCLK |
-				S3C2410_DCON_HANDSHAKE);
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
 	} else {
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_HANDSHAKE |
-				S3C2410_DCON_SYNC_PCLK);
-
 		s3c2410_dma_devconfig(prtd->params->channel,
-					S3C2410_DMASRC_HW, 0x3,
-					prtd->params->dma_addr);
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
 	}
 
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
 	/* flush the DMA channel */
 	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
 	prtd->dma_loaded = 0;
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 33c5de7e255..3c06c401d0f 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -108,48 +108,19 @@ static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
 	return 0;
 }
 
-
-unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai)
+struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai)
 {
 	struct s3c_i2sv2_info *i2s = to_info(dai);
 
-	return clk_get_rate(i2s->iis_cclk);
+	return i2s->iis_cclk;
 }
-EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate);
+EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clock);
 
 static int s3c64xx_i2s_probe(struct platform_device *pdev,
 			     struct snd_soc_dai *dai)
 {
-	struct device *dev = &pdev->dev;
-	struct s3c_i2sv2_info *i2s;
-	int ret;
-
-	dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id);
-
-	if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) {
-		dev_err(dev, "id %d out of range\n", pdev->id);
-		return -EINVAL;
-	}
-
-	i2s = &s3c64xx_i2s[pdev->id];
-
-	ret = s3c_i2sv2_probe(pdev, dai, i2s,
-			      pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0);
-	if (ret)
-		return ret;
-
-	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
-	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
-
-	i2s->iis_cclk = clk_get(dev, "audio-bus");
-	if (IS_ERR(i2s->iis_cclk)) {
-		dev_err(dev, "failed to get audio-bus");
-		iounmap(i2s->regs);
-		return -ENODEV;
-	}
-
 	/* configure GPIO for i2s port */
-	switch (pdev->id) {
+	switch (dai->id) {
 	case 0:
 		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
 		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
@@ -175,41 +146,122 @@ static int s3c64xx_i2s_probe(struct platform_device *pdev,
 	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
 
 #define S3C64XX_I2S_FMTS \
-	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE)
+	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+	 SNDRV_PCM_FMTBIT_S24_LE)
 
 static struct snd_soc_dai_ops s3c64xx_i2s_dai_ops = {
 	.set_sysclk	= s3c64xx_i2s_set_sysclk,	
 };
 
-struct snd_soc_dai s3c64xx_i2s_dai = {
-	.name		= "s3c64xx-i2s",
-	.id		= 0,
-	.probe		= s3c64xx_i2s_probe,
-	.playback = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C64XX_I2S_RATES,
-		.formats	= S3C64XX_I2S_FMTS,
+struct snd_soc_dai s3c64xx_i2s_dai[] = {
+	{
+		.name		= "s3c64xx-i2s",
+		.id		= 0,
+		.probe		= s3c64xx_i2s_probe,
+		.playback = {
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= S3C64XX_I2S_RATES,
+			.formats	= S3C64XX_I2S_FMTS,
+		},
+		.capture = {
+			 .channels_min	= 2,
+			 .channels_max	= 2,
+			 .rates		= S3C64XX_I2S_RATES,
+			 .formats	= S3C64XX_I2S_FMTS,
+		 },
+		.ops = &s3c64xx_i2s_dai_ops,
+		.symmetric_rates = 1,
 	},
-	.capture = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C64XX_I2S_RATES,
-		.formats	= S3C64XX_I2S_FMTS,
+	{
+		.name		= "s3c64xx-i2s",
+		.id		= 1,
+		.probe		= s3c64xx_i2s_probe,
+		.playback = {
+			.channels_min	= 2,
+			.channels_max	= 2,
+			.rates		= S3C64XX_I2S_RATES,
+			.formats	= S3C64XX_I2S_FMTS,
+		},
+		.capture = {
+			 .channels_min	= 2,
+			 .channels_max	= 2,
+			 .rates		= S3C64XX_I2S_RATES,
+			 .formats	= S3C64XX_I2S_FMTS,
+		 },
+		.ops = &s3c64xx_i2s_dai_ops,
+		.symmetric_rates = 1,
 	},
-	.ops = &s3c64xx_i2s_dai_ops,
 };
 EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
 
+static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_i2sv2_info *i2s;
+	struct snd_soc_dai *dai;
+	int ret;
+
+	if (pdev->id >= ARRAY_SIZE(s3c64xx_i2s)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	i2s = &s3c64xx_i2s[pdev->id];
+	dai = &s3c64xx_i2s_dai[pdev->id];
+	dai->dev = &pdev->dev;
+
+	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
+	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
+
+	i2s->iis_cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(i2s->iis_cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(i2s->iis_cclk);
+		goto err;
+	}
+
+	ret = s3c_i2sv2_probe(pdev, dai, i2s, 0);
+	if (ret)
+		goto err_clk;
+
+	ret = s3c_i2sv2_register_dai(dai);
+	if (ret != 0)
+		goto err_i2sv2;
+
+	return 0;
+
+err_i2sv2:
+	/* Not implemented for I2Sv2 core yet */
+err_clk:
+	clk_put(i2s->iis_cclk);
+err:
+	return ret;
+}
+
+static __devexit int s3c64xx_iis_dev_remove(struct platform_device *pdev)
+{
+	dev_err(&pdev->dev, "Device removal not yet supported\n");
+	return 0;
+}
+
+static struct platform_driver s3c64xx_iis_driver = {
+	.probe  = s3c64xx_iis_dev_probe,
+	.remove = s3c64xx_iis_dev_remove,
+	.driver = {
+		.name = "s3c64xx-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
 static int __init s3c64xx_i2s_init(void)
 {
-	return  s3c_i2sv2_register_dai(&s3c64xx_i2s_dai);
+	return platform_driver_register(&s3c64xx_iis_driver);
 }
 module_init(s3c64xx_i2s_init);
 
 static void __exit s3c64xx_i2s_exit(void)
 {
-	snd_soc_unregister_dai(&s3c64xx_i2s_dai);
+	platform_driver_unregister(&s3c64xx_iis_driver);
 }
 module_exit(s3c64xx_i2s_exit);
 
@@ -217,6 +269,3 @@ module_exit(s3c64xx_i2s_exit);
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
 MODULE_LICENSE("GPL");
-
-
-
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h
index b7ffe3c38b6..02148cee261 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.h
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.h
@@ -15,6 +15,8 @@
 #ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H
 #define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__
 
+struct clk;
+
 #include "s3c-i2s-v2.h"
 
 #define S3C64XX_DIV_BCLK	S3C_I2SV2_DIV_BCLK
@@ -24,8 +26,8 @@
 #define S3C64XX_CLKSRC_PCLK	(0)
 #define S3C64XX_CLKSRC_MUX	(1)
 
-extern struct snd_soc_dai s3c64xx_i2s_dai;
+extern struct snd_soc_dai s3c64xx_i2s_dai[];
 
-extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai);
+extern struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai);
 
 #endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */
diff --git a/sound/soc/s6000/Kconfig b/sound/soc/s6000/Kconfig
new file mode 100644
index 00000000000..c74eb3d4a47
--- /dev/null
+++ b/sound/soc/s6000/Kconfig
@@ -0,0 +1,19 @@
+config SND_S6000_SOC
+	tristate "SoC Audio for the Stretch s6000 family"
+	depends on XTENSA_VARIANT_S6000
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  s6000 family chips. You will also need to select the platform
+	  to support below.
+
+config SND_S6000_SOC_I2S
+	tristate
+
+config SND_S6000_SOC_S6IPCAM
+	tristate "SoC Audio support for Stretch 6105 IP Camera"
+	depends on SND_S6000_SOC && XTENSA_PLATFORM_S6105
+	select SND_S6000_SOC_I2S
+	select SND_SOC_TLV320AIC3X
+	help
+	  Say Y if you want to add support for SoC audio on the
+	  Stretch s6105 IP Camera Reference Design.
diff --git a/sound/soc/s6000/Makefile b/sound/soc/s6000/Makefile
new file mode 100644
index 00000000000..7a613612e01
--- /dev/null
+++ b/sound/soc/s6000/Makefile
@@ -0,0 +1,11 @@
+# s6000 Platform Support
+snd-soc-s6000-objs := s6000-pcm.o
+snd-soc-s6000-i2s-objs := s6000-i2s.o
+
+obj-$(CONFIG_SND_S6000_SOC) += snd-soc-s6000.o
+obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
+
+# s6105 Machine Support
+snd-soc-s6ipcam-objs := s6105-ipcam.o
+
+obj-$(CONFIG_SND_S6000_SOC_S6IPCAM) += snd-soc-s6ipcam.o
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
new file mode 100644
index 00000000000..c5cda187eca
--- /dev/null
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -0,0 +1,629 @@
+/*
+ * ALSA SoC I2S Audio Layer for the Stretch S6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "s6000-i2s.h"
+#include "s6000-pcm.h"
+
+struct s6000_i2s_dev {
+	dma_addr_t sifbase;
+	u8 __iomem *scbbase;
+	unsigned int wide;
+	unsigned int channel_in;
+	unsigned int channel_out;
+	unsigned int lines_in;
+	unsigned int lines_out;
+	struct s6000_pcm_dma_params dma_params;
+};
+
+#define S6_I2S_INTERRUPT_STATUS	0x00
+#define   S6_I2S_INT_OVERRUN	1
+#define   S6_I2S_INT_UNDERRUN	2
+#define   S6_I2S_INT_ALIGNMENT	4
+#define S6_I2S_INTERRUPT_ENABLE	0x04
+#define S6_I2S_INTERRUPT_RAW	0x08
+#define S6_I2S_INTERRUPT_CLEAR	0x0C
+#define S6_I2S_INTERRUPT_SET	0x10
+#define S6_I2S_MODE		0x20
+#define   S6_I2S_DUAL		0
+#define   S6_I2S_WIDE		1
+#define S6_I2S_TX_DEFAULT	0x24
+#define S6_I2S_DATA_CFG(c)	(0x40 + 0x10 * (c))
+#define   S6_I2S_IN		0
+#define   S6_I2S_OUT		1
+#define   S6_I2S_UNUSED		2
+#define S6_I2S_INTERFACE_CFG(c)	(0x44 + 0x10 * (c))
+#define   S6_I2S_DIV_MASK	0x001fff
+#define   S6_I2S_16BIT		0x000000
+#define   S6_I2S_20BIT		0x002000
+#define   S6_I2S_24BIT		0x004000
+#define   S6_I2S_32BIT		0x006000
+#define   S6_I2S_BITS_MASK	0x006000
+#define   S6_I2S_MEM_16BIT	0x000000
+#define   S6_I2S_MEM_32BIT	0x008000
+#define   S6_I2S_MEM_MASK	0x008000
+#define   S6_I2S_CHANNELS_SHIFT	16
+#define   S6_I2S_CHANNELS_MASK	0x030000
+#define   S6_I2S_SCK_IN		0x000000
+#define   S6_I2S_SCK_OUT	0x040000
+#define   S6_I2S_SCK_DIR	0x040000
+#define   S6_I2S_WS_IN		0x000000
+#define   S6_I2S_WS_OUT		0x080000
+#define   S6_I2S_WS_DIR		0x080000
+#define   S6_I2S_LEFT_FIRST	0x000000
+#define   S6_I2S_RIGHT_FIRST	0x100000
+#define   S6_I2S_FIRST		0x100000
+#define   S6_I2S_CUR_SCK	0x200000
+#define   S6_I2S_CUR_WS		0x400000
+#define S6_I2S_ENABLE(c)	(0x48 + 0x10 * (c))
+#define   S6_I2S_DISABLE_IF	0x02
+#define   S6_I2S_ENABLE_IF	0x03
+#define   S6_I2S_IS_BUSY	0x04
+#define   S6_I2S_DMA_ACTIVE	0x08
+#define   S6_I2S_IS_ENABLED	0x10
+
+#define S6_I2S_NUM_LINES	4
+
+#define S6_I2S_SIF_PORT0	0x0000000
+#define S6_I2S_SIF_PORT1	0x0000080 /* docs say 0x0000010 */
+
+static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
+{
+	writel(val, dev->scbbase + reg);
+}
+
+static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
+{
+	return readl(dev->scbbase + reg);
+}
+
+static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
+				  u32 mask, u32 val)
+{
+	val ^= s6_i2s_read_reg(dev, reg) & ~mask;
+	s6_i2s_write_reg(dev, reg, val);
+}
+
+static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
+{
+	int i, j, cur, prev;
+
+	/*
+	 * Wait for WCLK to toggle 5 times before enabling the channel
+	 * s6000 Family Datasheet 3.6.4:
+	 *   "At least two cycles of WS must occur between commands
+	 *    to disable or enable the interface"
+	 */
+	j = 0;
+	prev = ~S6_I2S_CUR_WS;
+	for (i = 1000000; --i && j < 6; ) {
+		cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
+		       & S6_I2S_CUR_WS;
+		if (prev != cur) {
+			prev = cur;
+			j++;
+		}
+	}
+	if (j < 6)
+		printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
+
+	s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
+}
+
+static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
+{
+	s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
+}
+
+static void s6000_i2s_start(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
+	int channel;
+
+	channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			dev->channel_out : dev->channel_in;
+
+	s6000_i2s_start_channel(dev, channel);
+}
+
+static void s6000_i2s_stop(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
+	int channel;
+
+	channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			dev->channel_out : dev->channel_in;
+
+	s6000_i2s_stop_channel(dev, channel);
+}
+
+static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			     int after)
+{
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
+			s6000_i2s_start(substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (!after)
+			s6000_i2s_stop(substream);
+	}
+	return 0;
+}
+
+static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
+{
+	unsigned int pending;
+	pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
+	pending &= S6_I2S_INT_ALIGNMENT |
+		   S6_I2S_INT_UNDERRUN |
+		   S6_I2S_INT_OVERRUN;
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
+
+	return pending;
+}
+
+static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
+{
+	struct s6000_i2s_dev *dev = cpu_dai->private_data;
+	unsigned int errors;
+	unsigned int ret;
+
+	errors = s6000_i2s_int_sources(dev);
+	if (likely(!errors))
+		return 0;
+
+	ret = 0;
+	if (errors & S6_I2S_INT_ALIGNMENT)
+		printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
+	if (errors & S6_I2S_INT_UNDERRUN)
+		ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
+	if (errors & S6_I2S_INT_OVERRUN)
+		ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
+	return ret;
+}
+
+static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
+{
+	int channel;
+	int n = 50;
+	for (channel = 0; channel < 2; channel++) {
+		while (--n >= 0) {
+			int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
+			if ((v & S6_I2S_IS_ENABLED)
+			    || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
+				break;
+			udelay(20);
+		}
+	}
+	if (n < 0)
+		printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
+}
+
+static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+				   unsigned int fmt)
+{
+	struct s6000_i2s_dev *dev = cpu_dai->private_data;
+	u32 w;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		w |= S6_I2S_LEFT_FIRST;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		w |= S6_I2S_RIGHT_FIRST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
+		       S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
+		       S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
+
+	return 0;
+}
+
+static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+
+	if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
+		return -EINVAL;
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
+		       S6_I2S_DIV_MASK, div / 2 - 1);
+	return 0;
+}
+
+static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *params,
+			       struct snd_soc_dai *dai)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+	int interf;
+	u32 w = 0;
+
+	if (dev->wide)
+		interf = 0;
+	else {
+		w |= (((params_channels(params) - 2) / 2)
+		      << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
+		interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				? dev->channel_out : dev->channel_in;
+	}
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
+		break;
+	default:
+		printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
+		       params_format(params));
+		return -EINVAL;
+	}
+
+	if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
+	     & S6_I2S_IS_ENABLED) {
+		printk(KERN_ERR "s6000-i2s: interface already enabled\n");
+		return -EBUSY;
+	}
+
+	s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
+		       S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
+		       w);
+
+	return 0;
+}
+
+static int s6000_i2s_dai_probe(struct platform_device *pdev,
+			       struct snd_soc_dai *dai)
+{
+	struct s6000_i2s_dev *dev = dai->private_data;
+	struct s6000_snd_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+	dev->wide = pdata->wide;
+	dev->channel_in = pdata->channel_in;
+	dev->channel_out = pdata->channel_out;
+	dev->lines_in = pdata->lines_in;
+	dev->lines_out = pdata->lines_out;
+
+	s6_i2s_write_reg(dev, S6_I2S_MODE,
+			 dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
+
+	if (dev->wide) {
+		int i;
+
+		if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
+			return -EINVAL;
+
+		dev->channel_in = 0;
+		dev->channel_out = 1;
+		dai->capture.channels_min = 2 * dev->lines_in;
+		dai->capture.channels_max = dai->capture.channels_min;
+		dai->playback.channels_min = 2 * dev->lines_out;
+		dai->playback.channels_max = dai->playback.channels_min;
+
+		for (i = 0; i < dev->lines_out; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
+
+		for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
+					 S6_I2S_UNUSED);
+
+		for (; i < S6_I2S_NUM_LINES; i++)
+			s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
+	} else {
+		unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
+
+		if (dev->lines_in > 1 || dev->lines_out > 1)
+			return -EINVAL;
+
+		dai->capture.channels_min = 2 * dev->lines_in;
+		dai->capture.channels_max = 8 * dev->lines_in;
+		dai->playback.channels_min = 2 * dev->lines_out;
+		dai->playback.channels_max = 8 * dev->lines_out;
+
+		if (dev->lines_in)
+			cfg[dev->channel_in] = S6_I2S_IN;
+		if (dev->lines_out)
+			cfg[dev->channel_out] = S6_I2S_OUT;
+
+		s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
+		s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
+	}
+
+	if (dev->lines_out) {
+		if (dev->lines_in) {
+			if (!dev->dma_params.dma_out)
+				return -ENODEV;
+		} else {
+			dev->dma_params.dma_out = dev->dma_params.dma_in;
+			dev->dma_params.dma_in = 0;
+		}
+	}
+	dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
+					S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
+	dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
+					S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
+	dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
+	return 0;
+}
+
+#define S6000_I2S_RATES	(SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
+			 SNDRV_PCM_RATE_8000_192000)
+#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops s6000_i2s_dai_ops = {
+	.set_fmt = s6000_i2s_set_dai_fmt,
+	.set_clkdiv = s6000_i2s_set_clkdiv,
+	.hw_params = s6000_i2s_hw_params,
+};
+
+struct snd_soc_dai s6000_i2s_dai = {
+	.name = "s6000-i2s",
+	.id = 0,
+	.probe = s6000_i2s_dai_probe,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.formats = S6000_I2S_FORMATS,
+		.rates = S6000_I2S_RATES,
+		.rate_min = 0,
+		.rate_max = 1562500,
+	},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 8,
+		.formats = S6000_I2S_FORMATS,
+		.rates = S6000_I2S_RATES,
+		.rate_min = 0,
+		.rate_max = 1562500,
+	},
+	.ops = &s6000_i2s_dai_ops,
+}
+EXPORT_SYMBOL_GPL(s6000_i2s_dai);
+
+static int __devinit s6000_i2s_probe(struct platform_device *pdev)
+{
+	struct s6000_i2s_dev *dev;
+	struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
+	u8 __iomem *mmio;
+	int ret;
+
+	scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!scbmem) {
+		dev_err(&pdev->dev, "no mem resource?\n");
+		ret = -ENODEV;
+		goto err_release_none;
+	}
+
+	region = request_mem_region(scbmem->start,
+				    scbmem->end - scbmem->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S SCB region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_none;
+	}
+
+	mmio = ioremap(scbmem->start, scbmem->end - scbmem->start + 1);
+	if (!mmio) {
+		dev_err(&pdev->dev, "can't ioremap SCB region\n");
+		ret = -ENOMEM;
+		goto err_release_scb;
+	}
+
+	sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!sifmem) {
+		dev_err(&pdev->dev, "no second mem resource?\n");
+		ret = -ENODEV;
+		goto err_release_map;
+	}
+
+	region = request_mem_region(sifmem->start,
+				    sifmem->end - sifmem->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S SIF region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_map;
+	}
+
+	dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dma1) {
+		dev_err(&pdev->dev, "no dma resource?\n");
+		ret = -ENODEV;
+		goto err_release_sif;
+	}
+
+	region = request_mem_region(dma1->start, dma1->end - dma1->start + 1,
+				    pdev->name);
+	if (!region) {
+		dev_err(&pdev->dev, "I2S DMA region already claimed\n");
+		ret = -EBUSY;
+		goto err_release_sif;
+	}
+
+	dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (dma2) {
+		region = request_mem_region(dma2->start,
+					    dma2->end - dma2->start + 1,
+					    pdev->name);
+		if (!region) {
+			dev_err(&pdev->dev,
+				"I2S DMA region already claimed\n");
+			ret = -EBUSY;
+			goto err_release_dma1;
+		}
+	}
+
+	dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err_release_dma2;
+	}
+
+	s6000_i2s_dai.dev = &pdev->dev;
+	s6000_i2s_dai.private_data = dev;
+	s6000_i2s_dai.dma_data = &dev->dma_params;
+
+	dev->sifbase = sifmem->start;
+	dev->scbbase = mmio;
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
+			 S6_I2S_INT_ALIGNMENT |
+			 S6_I2S_INT_UNDERRUN |
+			 S6_I2S_INT_OVERRUN);
+
+	s6000_i2s_stop_channel(dev, 0);
+	s6000_i2s_stop_channel(dev, 1);
+	s6000_i2s_wait_disabled(dev);
+
+	dev->dma_params.check_xrun = s6000_i2s_check_xrun;
+	dev->dma_params.trigger = s6000_i2s_trigger;
+	dev->dma_params.dma_in = dma1->start;
+	dev->dma_params.dma_out = dma2 ? dma2->start : 0;
+	dev->dma_params.irq = platform_get_irq(pdev, 0);
+	if (dev->dma_params.irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		ret = -ENODEV;
+		goto err_release_dev;
+	}
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
+			 S6_I2S_INT_ALIGNMENT |
+			 S6_I2S_INT_UNDERRUN |
+			 S6_I2S_INT_OVERRUN);
+
+	ret = snd_soc_register_dai(&s6000_i2s_dai);
+	if (ret)
+		goto err_release_dev;
+
+	return 0;
+
+err_release_dev:
+	kfree(dev);
+err_release_dma2:
+	if (dma2)
+		release_mem_region(dma2->start, dma2->end - dma2->start + 1);
+err_release_dma1:
+	release_mem_region(dma1->start, dma1->end - dma1->start + 1);
+err_release_sif:
+	release_mem_region(sifmem->start, (sifmem->end - sifmem->start) + 1);
+err_release_map:
+	iounmap(mmio);
+err_release_scb:
+	release_mem_region(scbmem->start, (scbmem->end - scbmem->start) + 1);
+err_release_none:
+	return ret;
+}
+
+static void __devexit s6000_i2s_remove(struct platform_device *pdev)
+{
+	struct s6000_i2s_dev *dev = s6000_i2s_dai.private_data;
+	struct resource *region;
+	void __iomem *mmio = dev->scbbase;
+
+	snd_soc_unregister_dai(&s6000_i2s_dai);
+
+	s6000_i2s_stop_channel(dev, 0);
+	s6000_i2s_stop_channel(dev, 1);
+
+	s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
+	s6000_i2s_dai.private_data = 0;
+	kfree(dev);
+
+	region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	release_mem_region(region->start, region->end - region->start + 1);
+
+	region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (region)
+		release_mem_region(region->start,
+				   region->end - region->start + 1);
+
+	region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(region->start, (region->end - region->start) + 1);
+
+	iounmap(mmio);
+	region = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_mem_region(region->start, (region->end - region->start) + 1);
+}
+
+static struct platform_driver s6000_i2s_driver = {
+	.probe  = s6000_i2s_probe,
+	.remove = __devexit_p(s6000_i2s_remove),
+	.driver = {
+		.name   = "s6000-i2s",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init s6000_i2s_init(void)
+{
+	return platform_driver_register(&s6000_i2s_driver);
+}
+module_init(s6000_i2s_init);
+
+static void __exit s6000_i2s_exit(void)
+{
+	platform_driver_unregister(&s6000_i2s_driver);
+}
+module_exit(s6000_i2s_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-i2s.h b/sound/soc/s6000/s6000-i2s.h
new file mode 100644
index 00000000000..2375fdfe6db
--- /dev/null
+++ b/sound/soc/s6000/s6000-i2s.h
@@ -0,0 +1,25 @@
+/*
+ * ALSA SoC I2S Audio Layer for the Stretch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _S6000_I2S_H
+#define _S6000_I2S_H
+
+extern struct snd_soc_dai s6000_i2s_dai;
+
+struct s6000_snd_platform_data {
+	int lines_in;
+	int lines_out;
+	int channel_in;
+	int channel_out;
+	int wide;
+	int same_rate;
+};
+#endif
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
new file mode 100644
index 00000000000..83b8028e209
--- /dev/null
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -0,0 +1,497 @@
+/*
+ * ALSA PCM interface for the Stetch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <variant/dmac.h>
+
+#include "s6000-pcm.h"
+
+#define S6_PCM_PREALLOCATE_SIZE (96 * 1024)
+#define S6_PCM_PREALLOCATE_MAX  (2048 * 1024)
+
+static struct snd_pcm_hardware s6000_pcm_hardware = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE),
+	.rates = (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
+		  SNDRV_PCM_RATE_8000_192000),
+	.rate_min = 0,
+	.rate_max = 1562500,
+	.channels_min = 2,
+	.channels_max = 8,
+	.buffer_bytes_max = 0x7ffffff0,
+	.period_bytes_min = 16,
+	.period_bytes_max = 0xfffff0,
+	.periods_min = 2,
+	.periods_max = 1024, /* no limit */
+	.fifo_size = 0,
+};
+
+struct s6000_runtime_data {
+	spinlock_t lock;
+	int period;		/* current DMA period */
+};
+
+static void s6000_pcm_enqueue_dma(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int channel;
+	unsigned int period_size;
+	unsigned int dma_offset;
+	dma_addr_t dma_pos;
+	dma_addr_t src, dst;
+
+	period_size = snd_pcm_lib_period_bytes(substream);
+	dma_offset = prtd->period * period_size;
+	dma_pos = runtime->dma_addr + dma_offset;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		src = dma_pos;
+		dst = par->sif_out;
+		channel = par->dma_out;
+	} else {
+		src = par->sif_in;
+		dst = dma_pos;
+		channel = par->dma_in;
+	}
+
+	if (!s6dmac_channel_enabled(DMA_MASK_DMAC(channel),
+				    DMA_INDEX_CHNL(channel)))
+		return;
+
+	if (s6dmac_fifo_full(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel))) {
+		printk(KERN_ERR "s6000-pcm: fifo full\n");
+		return;
+	}
+
+	BUG_ON(period_size & 15);
+	s6dmac_put_fifo(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel),
+			src, dst, period_size);
+
+	prtd->period++;
+	if (unlikely(prtd->period >= runtime->periods))
+		prtd->period = 0;
+}
+
+static irqreturn_t s6000_pcm_irq(int irq, void *data)
+{
+	struct snd_pcm *pcm = data;
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+	struct s6000_runtime_data *prtd;
+	unsigned int has_xrun;
+	int i, ret = IRQ_NONE;
+	u32 channel[2] = {
+		[SNDRV_PCM_STREAM_PLAYBACK] = params->dma_out,
+		[SNDRV_PCM_STREAM_CAPTURE] = params->dma_in
+	};
+
+	has_xrun = params->check_xrun(runtime->dai->cpu_dai);
+
+	for (i = 0; i < ARRAY_SIZE(channel); ++i) {
+		struct snd_pcm_substream *substream = pcm->streams[i].substream;
+		unsigned int pending;
+
+		if (!channel[i])
+			continue;
+
+		if (unlikely(has_xrun & (1 << i)) &&
+		    substream->runtime &&
+		    snd_pcm_running(substream)) {
+			dev_dbg(pcm->dev, "xrun\n");
+			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+			ret = IRQ_HANDLED;
+		}
+
+		pending = s6dmac_int_sources(DMA_MASK_DMAC(channel[i]),
+					     DMA_INDEX_CHNL(channel[i]));
+
+		if (pending & 1) {
+			ret = IRQ_HANDLED;
+			if (likely(substream->runtime &&
+				   snd_pcm_running(substream))) {
+				snd_pcm_period_elapsed(substream);
+				dev_dbg(pcm->dev, "period elapsed %x %x\n",
+				       s6dmac_cur_src(DMA_MASK_DMAC(channel[i]),
+						   DMA_INDEX_CHNL(channel[i])),
+				       s6dmac_cur_dst(DMA_MASK_DMAC(channel[i]),
+						   DMA_INDEX_CHNL(channel[i])));
+				prtd = substream->runtime->private_data;
+				spin_lock(&prtd->lock);
+				s6000_pcm_enqueue_dma(substream);
+				spin_unlock(&prtd->lock);
+			}
+		}
+
+		if (unlikely(pending & ~7)) {
+			if (pending & (1 << 3))
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Underflow\n",
+				       channel[i]);
+			if (pending & (1 << 4))
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Overflow\n",
+				       channel[i]);
+			if (pending & 0x1e0)
+				printk(KERN_WARNING
+				       "s6000-pcm: DMA %x Master Error "
+				       "(mask %x)\n",
+				       channel[i], pending >> 5);
+
+		}
+	}
+
+	return ret;
+}
+
+static int s6000_pcm_start(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	unsigned long flags;
+	int srcinc;
+	u32 dma;
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		srcinc = 1;
+		dma = par->dma_out;
+	} else {
+		srcinc = 0;
+		dma = par->dma_in;
+	}
+	s6dmac_enable_chan(DMA_MASK_DMAC(dma), DMA_INDEX_CHNL(dma),
+			   1 /* priority 1 (0 is max) */,
+			   0 /* peripheral requests w/o xfer length mode */,
+			   srcinc /* source address increment */,
+			   srcinc^1 /* destination address increment */,
+			   0 /* chunksize 0 (skip impossible on this dma) */,
+			   0 /* source skip after chunk (impossible) */,
+			   0 /* destination skip after chunk (impossible) */,
+			   4 /* 16 byte burst size */,
+			   -1 /* don't conserve bandwidth */,
+			   0 /* low watermark irq descriptor theshold */,
+			   0 /* disable hardware timestamps */,
+			   1 /* enable channel */);
+
+	s6000_pcm_enqueue_dma(substream);
+	s6000_pcm_enqueue_dma(substream);
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	return 0;
+}
+
+static int s6000_pcm_stop(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	unsigned long flags;
+	u32 channel;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		channel = par->dma_out;
+	else
+		channel = par->dma_in;
+
+	s6dmac_set_terminal_count(DMA_MASK_DMAC(channel),
+				  DMA_INDEX_CHNL(channel), 0);
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	s6dmac_disable_chan(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel));
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	return 0;
+}
+
+static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int ret;
+
+	ret = par->trigger(substream, cmd, 0);
+	if (ret < 0)
+		return ret;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ret = s6000_pcm_start(substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ret = s6000_pcm_stop(substream);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (ret < 0)
+		return ret;
+
+	return par->trigger(substream, cmd, 1);
+}
+
+static int s6000_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct s6000_runtime_data *prtd = substream->runtime->private_data;
+
+	prtd->period = 0;
+
+	return 0;
+}
+
+static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+	unsigned long flags;
+	unsigned int offset;
+	dma_addr_t count;
+
+	spin_lock_irqsave(&prtd->lock, flags);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		count = s6dmac_cur_src(DMA_MASK_DMAC(par->dma_out),
+				       DMA_INDEX_CHNL(par->dma_out));
+	else
+		count = s6dmac_cur_dst(DMA_MASK_DMAC(par->dma_in),
+				       DMA_INDEX_CHNL(par->dma_in));
+
+	count -= runtime->dma_addr;
+
+	spin_unlock_irqrestore(&prtd->lock, flags);
+
+	offset = bytes_to_frames(runtime, count);
+	if (unlikely(offset >= runtime->buffer_size))
+		offset = 0;
+
+	return offset;
+}
+
+static int s6000_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd;
+	int ret;
+
+	snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware);
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
+	if (ret < 0)
+		return ret;
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
+	if (ret < 0)
+		return ret;
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+
+	if (par->same_rate) {
+		int rate;
+		spin_lock(&par->lock); /* needed? */
+		rate = par->rate;
+		spin_unlock(&par->lock);
+		if (rate != -1) {
+			ret = snd_pcm_hw_constraint_minmax(runtime,
+							SNDRV_PCM_HW_PARAM_RATE,
+							rate, rate);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	prtd = kzalloc(sizeof(struct s6000_runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+
+	return 0;
+}
+
+static int s6000_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s6000_runtime_data *prtd = runtime->private_data;
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int s6000_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+	int ret;
+	ret = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+	if (ret < 0) {
+		printk(KERN_WARNING "s6000-pcm: allocation of memory failed\n");
+		return ret;
+	}
+
+	if (par->same_rate) {
+		spin_lock(&par->lock);
+		if (par->rate == -1 ||
+		    !(par->in_use & ~(1 << substream->stream))) {
+			par->rate = params_rate(hw_params);
+			par->in_use |= 1 << substream->stream;
+		} else if (params_rate(hw_params) != par->rate) {
+			snd_pcm_lib_free_pages(substream);
+			par->in_use &= ~(1 << substream->stream);
+			ret = -EBUSY;
+		}
+		spin_unlock(&par->lock);
+	}
+	return ret;
+}
+
+static int s6000_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+
+	spin_lock(&par->lock);
+	par->in_use &= ~(1 << substream->stream);
+	if (!par->in_use)
+		par->rate = -1;
+	spin_unlock(&par->lock);
+
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static struct snd_pcm_ops s6000_pcm_ops = {
+	.open = 	s6000_pcm_open,
+	.close = 	s6000_pcm_close,
+	.ioctl = 	snd_pcm_lib_ioctl,
+	.hw_params = 	s6000_pcm_hw_params,
+	.hw_free = 	s6000_pcm_hw_free,
+	.trigger =	s6000_pcm_trigger,
+	.prepare = 	s6000_pcm_prepare,
+	.pointer = 	s6000_pcm_pointer,
+};
+
+static void s6000_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+
+	free_irq(params->irq, pcm);
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static u64 s6000_pcm_dmamask = DMA_32BIT_MASK;
+
+static int s6000_pcm_new(struct snd_card *card,
+			 struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	struct snd_soc_pcm_runtime *runtime = pcm->private_data;
+	struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+	int res;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &s6000_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_32BIT_MASK;
+
+	if (params->dma_in) {
+		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
+				    DMA_INDEX_CHNL(params->dma_in));
+		s6dmac_int_sources(DMA_MASK_DMAC(params->dma_in),
+				   DMA_INDEX_CHNL(params->dma_in));
+	}
+
+	if (params->dma_out) {
+		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_out),
+				    DMA_INDEX_CHNL(params->dma_out));
+		s6dmac_int_sources(DMA_MASK_DMAC(params->dma_out),
+				   DMA_INDEX_CHNL(params->dma_out));
+	}
+
+	res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
+			  s6000_soc_platform.name, pcm);
+	if (res) {
+		printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
+		return res;
+	}
+
+	res = snd_pcm_lib_preallocate_pages_for_all(pcm,
+						    SNDRV_DMA_TYPE_DEV,
+						    card->dev,
+						    S6_PCM_PREALLOCATE_SIZE,
+						    S6_PCM_PREALLOCATE_MAX);
+	if (res)
+		printk(KERN_WARNING "s6000-pcm: preallocation failed\n");
+
+	spin_lock_init(&params->lock);
+	params->in_use = 0;
+	params->rate = -1;
+	return 0;
+}
+
+struct snd_soc_platform s6000_soc_platform = {
+	.name = 	"s6000-audio",
+	.pcm_ops = 	&s6000_pcm_ops,
+	.pcm_new = 	s6000_pcm_new,
+	.pcm_free = 	s6000_pcm_free,
+};
+EXPORT_SYMBOL_GPL(s6000_soc_platform);
+
+static int __init s6000_pcm_init(void)
+{
+	return snd_soc_register_platform(&s6000_soc_platform);
+}
+module_init(s6000_pcm_init);
+
+static void __exit s6000_pcm_exit(void)
+{
+	snd_soc_unregister_platform(&s6000_soc_platform);
+}
+module_exit(s6000_pcm_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6000 family PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-pcm.h b/sound/soc/s6000/s6000-pcm.h
new file mode 100644
index 00000000000..96f23f6f52b
--- /dev/null
+++ b/sound/soc/s6000/s6000-pcm.h
@@ -0,0 +1,35 @@
+/*
+ * ALSA PCM interface for the Stretch s6000 family
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _S6000_PCM_H
+#define _S6000_PCM_H
+
+struct snd_soc_dai;
+struct snd_pcm_substream;
+
+struct s6000_pcm_dma_params {
+	unsigned int (*check_xrun)(struct snd_soc_dai *cpu_dai);
+	int (*trigger)(struct snd_pcm_substream *substream, int cmd, int after);
+	dma_addr_t sif_in;
+	dma_addr_t sif_out;
+	u32 dma_in;
+	u32 dma_out;
+	int irq;
+	int same_rate;
+
+	spinlock_t lock;
+	int in_use;
+	int rate;
+};
+
+extern struct snd_soc_platform s6000_soc_platform;
+
+#endif
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
new file mode 100644
index 00000000000..b5f95f9781c
--- /dev/null
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -0,0 +1,244 @@
+/*
+ * ASoC driver for Stretch s6105 IP camera platform
+ *
+ * Author:      Daniel Gloeckner, <dg@emlix.com>
+ * Copyright:   (C) 2009 emlix GmbH <info@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <variant/dmac.h>
+
+#include "../codecs/tlv320aic3x.h"
+#include "s6000-pcm.h"
+#include "s6000-i2s.h"
+
+#define S6105_CAM_CODEC_CLOCK 12288000
+
+static int s6105_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret = 0;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+					     SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM |
+					   SND_SOC_DAIFMT_NB_NF);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, S6105_CAM_CODEC_CLOCK,
+					    SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops s6105_ops = {
+	.hw_params = s6105_hw_params,
+};
+
+/* s6105 machine dapm widgets */
+static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("Audio Out Differential", NULL),
+	SND_SOC_DAPM_LINE("Audio Out Stereo", NULL),
+	SND_SOC_DAPM_LINE("Audio In", NULL),
+};
+
+/* s6105 machine audio_mapnections to the codec pins */
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Audio Out connected to HPLOUT, HPLCOM, HPROUT */
+	{"Audio Out Differential", NULL, "HPLOUT"},
+	{"Audio Out Differential", NULL, "HPLCOM"},
+	{"Audio Out Stereo", NULL, "HPLOUT"},
+	{"Audio Out Stereo", NULL, "HPROUT"},
+
+	/* Audio In connected to LINE1L, LINE1R */
+	{"LINE1L", NULL, "Audio In"},
+	{"LINE1R", NULL, "Audio In"},
+};
+
+static int output_type_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item) {
+		uinfo->value.enumerated.item = 1;
+		strcpy(uinfo->value.enumerated.name, "HPLOUT/HPROUT");
+	} else {
+		strcpy(uinfo->value.enumerated.name, "HPLOUT/HPLCOM");
+	}
+	return 0;
+}
+
+static int output_type_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.enumerated.item[0] = kcontrol->private_value;
+	return 0;
+}
+
+static int output_type_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = kcontrol->private_data;
+	unsigned int val = (ucontrol->value.enumerated.item[0] != 0);
+	char *differential = "Audio Out Differential";
+	char *stereo = "Audio Out Stereo";
+
+	if (kcontrol->private_value == val)
+		return 0;
+	kcontrol->private_value = val;
+	snd_soc_dapm_disable_pin(codec, val ? differential : stereo);
+	snd_soc_dapm_sync(codec);
+	snd_soc_dapm_enable_pin(codec, val ? stereo : differential);
+	snd_soc_dapm_sync(codec);
+
+	return 1;
+}
+
+static const struct snd_kcontrol_new audio_out_mux = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Master Output Mux",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = output_type_info,
+	.get = output_type_get,
+	.put = output_type_put,
+	.private_value = 1 /* default to stereo */
+};
+
+/* Logic for a aic3x as connected on the s6105 ip camera ref design */
+static int s6105_aic3x_init(struct snd_soc_codec *codec)
+{
+	/* Add s6105 specific widgets */
+	snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets,
+				  ARRAY_SIZE(aic3x_dapm_widgets));
+
+	/* Set up s6105 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* not present */
+	snd_soc_dapm_nc_pin(codec, "MONO_LOUT");
+	snd_soc_dapm_nc_pin(codec, "LINE2L");
+	snd_soc_dapm_nc_pin(codec, "LINE2R");
+
+	/* not connected */
+	snd_soc_dapm_nc_pin(codec, "MIC3L"); /* LINE2L on this chip */
+	snd_soc_dapm_nc_pin(codec, "MIC3R"); /* LINE2R on this chip */
+	snd_soc_dapm_nc_pin(codec, "LLOUT");
+	snd_soc_dapm_nc_pin(codec, "RLOUT");
+	snd_soc_dapm_nc_pin(codec, "HPRCOM");
+
+	/* always connected */
+	snd_soc_dapm_enable_pin(codec, "Audio In");
+
+	/* must correspond to audio_out_mux.private_value initializer */
+	snd_soc_dapm_disable_pin(codec, "Audio Out Differential");
+	snd_soc_dapm_sync(codec);
+	snd_soc_dapm_enable_pin(codec, "Audio Out Stereo");
+
+	snd_soc_dapm_sync(codec);
+
+	snd_ctl_add(codec->card, snd_ctl_new1(&audio_out_mux, codec));
+
+	return 0;
+}
+
+/* s6105 digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link s6105_dai = {
+	.name = "TLV320AIC31",
+	.stream_name = "AIC31",
+	.cpu_dai = &s6000_i2s_dai,
+	.codec_dai = &aic3x_dai,
+	.init = s6105_aic3x_init,
+	.ops = &s6105_ops,
+};
+
+/* s6105 audio machine driver */
+static struct snd_soc_card snd_soc_card_s6105 = {
+	.name = "Stretch IP Camera",
+	.platform = &s6000_soc_platform,
+	.dai_link = &s6105_dai,
+	.num_links = 1,
+};
+
+/* s6105 audio private data */
+static struct aic3x_setup_data s6105_aic3x_setup = {
+	.i2c_bus = 0,
+	.i2c_address = 0x18,
+};
+
+/* s6105 audio subsystem */
+static struct snd_soc_device s6105_snd_devdata = {
+	.card = &snd_soc_card_s6105,
+	.codec_dev = &soc_codec_dev_aic3x,
+	.codec_data = &s6105_aic3x_setup,
+};
+
+static struct s6000_snd_platform_data __initdata s6105_snd_data = {
+	.wide		= 0,
+	.channel_in	= 0,
+	.channel_out	= 1,
+	.lines_in	= 1,
+	.lines_out	= 1,
+	.same_rate	= 1,
+};
+
+static struct platform_device *s6105_snd_device;
+
+static int __init s6105_init(void)
+{
+	int ret;
+
+	s6105_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s6105_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(s6105_snd_device, &s6105_snd_devdata);
+	s6105_snd_devdata.dev = &s6105_snd_device->dev;
+	platform_device_add_data(s6105_snd_device, &s6105_snd_data,
+				 sizeof(s6105_snd_data));
+
+	ret = platform_device_add(s6105_snd_device);
+	if (ret)
+		platform_device_put(s6105_snd_device);
+
+	return ret;
+}
+
+static void __exit s6105_exit(void)
+{
+	platform_device_unregister(s6105_snd_device);
+}
+
+module_init(s6105_init);
+module_exit(s6105_exit);
+
+MODULE_AUTHOR("Daniel Gloeckner");
+MODULE_DESCRIPTION("Stretch s6105 IP camera ASoC driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index 56fa0872abb..b378096cadb 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -145,7 +145,7 @@ static int ssi_hw_params(struct snd_pcm_substream *substream,
 	recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
 
 	pr_debug("ssi_hw_params() enter\nssicr was    %08lx\n", ssicr);
-	pr_debug("bits: %d channels: %d\n", bits, channels);
+	pr_debug("bits: %u channels: %u\n", bits, channels);
 
 	ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
 		   CR_SWL_MASK);
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 99712f652d0..3f44150d8e3 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -113,6 +113,35 @@ static int soc_ac97_dev_register(struct snd_soc_codec *codec)
 }
 #endif
 
+static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_card *card = socdev->card;
+	struct snd_soc_dai_link *machine = rtd->dai;
+	struct snd_soc_dai *cpu_dai = machine->cpu_dai;
+	struct snd_soc_dai *codec_dai = machine->codec_dai;
+	int ret;
+
+	if (codec_dai->symmetric_rates || cpu_dai->symmetric_rates ||
+	    machine->symmetric_rates) {
+		dev_dbg(card->dev, "Symmetry forces %dHz rate\n", 
+			machine->rate);
+
+		ret = snd_pcm_hw_constraint_minmax(substream->runtime,
+						   SNDRV_PCM_HW_PARAM_RATE,
+						   machine->rate,
+						   machine->rate);
+		if (ret < 0) {
+			dev_err(card->dev,
+				"Unable to apply rate symmetry constraint: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * Called by ALSA when a PCM substream is opened, the runtime->hw record is
  * then initialized and any private data can be allocated. This also calls
@@ -221,6 +250,13 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 		goto machine_err;
 	}
 
+	/* Symmetry only applies if we've already got an active stream. */
+	if (cpu_dai->active || codec_dai->active) {
+		ret = soc_pcm_apply_symmetry(substream);
+		if (ret != 0)
+			goto machine_err;
+	}
+
 	pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
 	pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates);
 	pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min,
@@ -263,7 +299,6 @@ static void close_delayed_work(struct work_struct *work)
 {
 	struct snd_soc_card *card = container_of(work, struct snd_soc_card,
 						 delayed_work.work);
-	struct snd_soc_device *socdev = card->socdev;
 	struct snd_soc_codec *codec = card->codec;
 	struct snd_soc_dai *codec_dai;
 	int i;
@@ -279,27 +314,10 @@ static void close_delayed_work(struct work_struct *work)
 
 		/* are we waiting on this codec DAI stream */
 		if (codec_dai->pop_wait == 1) {
-
-			/* Reduce power if no longer active */
-			if (codec->active == 0) {
-				pr_debug("pop wq D1 %s %s\n", codec->name,
-					 codec_dai->playback.stream_name);
-				snd_soc_dapm_set_bias_level(socdev,
-					SND_SOC_BIAS_PREPARE);
-			}
-
 			codec_dai->pop_wait = 0;
 			snd_soc_dapm_stream_event(codec,
 				codec_dai->playback.stream_name,
 				SND_SOC_DAPM_STREAM_STOP);
-
-			/* Fall into standby if no longer active */
-			if (codec->active == 0) {
-				pr_debug("pop wq D3 %s %s\n", codec->name,
-					 codec_dai->playback.stream_name);
-				snd_soc_dapm_set_bias_level(socdev,
-					SND_SOC_BIAS_STANDBY);
-			}
 		}
 	}
 	mutex_unlock(&pcm_mutex);
@@ -363,10 +381,6 @@ static int soc_codec_close(struct snd_pcm_substream *substream)
 		snd_soc_dapm_stream_event(codec,
 			codec_dai->capture.stream_name,
 			SND_SOC_DAPM_STREAM_STOP);
-
-		if (codec->active == 0 && codec_dai->pop_wait == 0)
-			snd_soc_dapm_set_bias_level(socdev,
-						SND_SOC_BIAS_STANDBY);
 	}
 
 	mutex_unlock(&pcm_mutex);
@@ -431,36 +445,16 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream)
 		cancel_delayed_work(&card->delayed_work);
 	}
 
-	/* do we need to power up codec */
-	if (codec->bias_level != SND_SOC_BIAS_ON) {
-		snd_soc_dapm_set_bias_level(socdev,
-					    SND_SOC_BIAS_PREPARE);
-
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->playback.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-		else
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->capture.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-
-		snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON);
-		snd_soc_dai_digital_mute(codec_dai, 0);
-
-	} else {
-		/* codec already powered - power on widgets */
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->playback.stream_name,
-					SND_SOC_DAPM_STREAM_START);
-		else
-			snd_soc_dapm_stream_event(codec,
-					codec_dai->capture.stream_name,
-					SND_SOC_DAPM_STREAM_START);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		snd_soc_dapm_stream_event(codec,
+					  codec_dai->playback.stream_name,
+					  SND_SOC_DAPM_STREAM_START);
+	else
+		snd_soc_dapm_stream_event(codec,
+					  codec_dai->capture.stream_name,
+					  SND_SOC_DAPM_STREAM_START);
 
-		snd_soc_dai_digital_mute(codec_dai, 0);
-	}
+	snd_soc_dai_digital_mute(codec_dai, 0);
 
 out:
 	mutex_unlock(&pcm_mutex);
@@ -521,6 +515,8 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	machine->rate = params_rate(params);
+
 out:
 	mutex_unlock(&pcm_mutex);
 	return ret;
@@ -632,6 +628,12 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state)
 	struct snd_soc_codec *codec = card->codec;
 	int i;
 
+	/* If the initialization of this soc device failed, there is no codec
+	 * associated with it. Just bail out in this case.
+	 */
+	if (!codec)
+		return 0;
+
 	/* Due to the resume being scheduled into a workqueue we could
 	* suspend before that's finished - wait for it to complete.
 	 */
@@ -954,6 +956,9 @@ static int soc_remove(struct platform_device *pdev)
 	struct snd_soc_platform *platform = card->platform;
 	struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
 
+	if (!card->instantiated)
+		return 0;
+
 	run_delayed_work(&card->delayed_work);
 
 	if (platform->remove)
@@ -1331,6 +1336,7 @@ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid)
 		return ret;
 	}
 
+	codec->socdev = socdev;
 	codec->card->dev = socdev->dev;
 	codec->card->private_data = codec;
 	strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver));
@@ -1741,7 +1747,7 @@ int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol,
 {
 	int max = kcontrol->private_value;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -1771,7 +1777,7 @@ int snd_soc_info_volsw(struct snd_kcontrol *kcontrol,
 	unsigned int shift = mc->shift;
 	unsigned int rshift = mc->rshift;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -1878,7 +1884,7 @@ int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol,
 		(struct soc_mixer_control *)kcontrol->private_value;
 	int max = mc->max;
 
-	if (max == 1)
+	if (max == 1 && !strstr(kcontrol->id.name, " Volume"))
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -2062,7 +2068,7 @@ EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8);
 int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 	unsigned int freq, int dir)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_sysclk)
 		return dai->ops->set_sysclk(dai, clk_id, freq, dir);
 	else
 		return -EINVAL;
@@ -2082,7 +2088,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
 int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
 	int div_id, int div)
 {
-	if (dai->ops->set_clkdiv)
+	if (dai->ops && dai->ops->set_clkdiv)
 		return dai->ops->set_clkdiv(dai, div_id, div);
 	else
 		return -EINVAL;
@@ -2101,7 +2107,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv);
 int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
 	int pll_id, unsigned int freq_in, unsigned int freq_out)
 {
-	if (dai->ops->set_pll)
+	if (dai->ops && dai->ops->set_pll)
 		return dai->ops->set_pll(dai, pll_id, freq_in, freq_out);
 	else
 		return -EINVAL;
@@ -2117,7 +2123,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
  */
 int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
-	if (dai->ops->set_fmt)
+	if (dai->ops && dai->ops->set_fmt)
 		return dai->ops->set_fmt(dai, fmt);
 	else
 		return -EINVAL;
@@ -2136,7 +2142,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt);
 int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
 	unsigned int mask, int slots)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_tdm_slot)
 		return dai->ops->set_tdm_slot(dai, mask, slots);
 	else
 		return -EINVAL;
@@ -2152,7 +2158,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot);
  */
 int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate)
 {
-	if (dai->ops->set_sysclk)
+	if (dai->ops && dai->ops->set_tristate)
 		return dai->ops->set_tristate(dai, tristate);
 	else
 		return -EINVAL;
@@ -2168,7 +2174,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate);
  */
 int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute)
 {
-	if (dai->ops->digital_mute)
+	if (dai->ops && dai->ops->digital_mute)
 		return dai->ops->digital_mute(dai, mute);
 	else
 		return -EINVAL;
@@ -2349,6 +2355,39 @@ void snd_soc_unregister_platform(struct snd_soc_platform *platform)
 }
 EXPORT_SYMBOL_GPL(snd_soc_unregister_platform);
 
+static u64 codec_format_map[] = {
+	SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE,
+	SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE,
+	SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE,
+	SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+	SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
+	SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE,
+	SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3BE,
+	SNDRV_PCM_FMTBIT_U24_3LE | SNDRV_PCM_FMTBIT_U24_3BE,
+	SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE,
+	SNDRV_PCM_FMTBIT_U20_3LE | SNDRV_PCM_FMTBIT_U20_3BE,
+	SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE,
+	SNDRV_PCM_FMTBIT_U18_3LE | SNDRV_PCM_FMTBIT_U18_3BE,
+	SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE,
+	SNDRV_PCM_FMTBIT_FLOAT64_LE | SNDRV_PCM_FMTBIT_FLOAT64_BE,
+	SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE
+	| SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
+};
+
+/* Fix up the DAI formats for endianness: codecs don't actually see
+ * the endianness of the data but we're using the CPU format
+ * definitions which do need to include endianness so we ensure that
+ * codec DAIs always have both big and little endian variants set.
+ */
+static void fixup_codec_formats(struct snd_soc_pcm_stream *stream)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(codec_format_map); i++)
+		if (stream->formats & codec_format_map[i])
+			stream->formats |= codec_format_map[i];
+}
+
 /**
  * snd_soc_register_codec - Register a codec with the ASoC core
  *
@@ -2356,6 +2395,8 @@ EXPORT_SYMBOL_GPL(snd_soc_unregister_platform);
  */
 int snd_soc_register_codec(struct snd_soc_codec *codec)
 {
+	int i;
+
 	if (!codec->name)
 		return -EINVAL;
 
@@ -2365,6 +2406,11 @@ int snd_soc_register_codec(struct snd_soc_codec *codec)
 
 	INIT_LIST_HEAD(&codec->list);
 
+	for (i = 0; i < codec->num_dai; i++) {
+		fixup_codec_formats(&codec->dai[i].playback);
+		fixup_codec_formats(&codec->dai[i].capture);
+	}
+
 	mutex_lock(&client_mutex);
 	list_add(&codec->list, &codec_list);
 	snd_soc_instantiate_cards();
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 735903a7467..21c69074aa1 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -12,7 +12,7 @@
  *  Features:
  *    o Changes power status of internal codec blocks depending on the
  *      dynamic configuration of codec internal audio paths and active
- *      DAC's/ADC's.
+ *      DACs/ADCs.
  *    o Platform power domain - can support external components i.e. amps and
  *      mic/meadphone insertion events.
  *    o Automatic Mic Bias support
@@ -52,23 +52,21 @@
 
 /* dapm power sequences - make this per codec in the future */
 static int dapm_up_seq[] = {
-	snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic,
-	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac,
-	snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga,
-	snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post
+	snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias,
+	snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
+	snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl,
+	snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
+	snd_soc_dapm_post
 };
 
 static int dapm_down_seq[] = {
 	snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
 	snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
 	snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
-	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post
+	snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
+	snd_soc_dapm_post
 };
 
-static int dapm_status = 1;
-module_param(dapm_status, int, 0);
-MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries");
-
 static void pop_wait(u32 pop_time)
 {
 	if (pop_time)
@@ -96,6 +94,48 @@ static inline struct snd_soc_dapm_widget *dapm_cnew_widget(
 	return kmemdup(_widget, sizeof(*_widget), GFP_KERNEL);
 }
 
+/**
+ * snd_soc_dapm_set_bias_level - set the bias level for the system
+ * @socdev: audio device
+ * @level: level to configure
+ *
+ * Configure the bias (power) levels for the SoC audio device.
+ *
+ * Returns 0 for success else error.
+ */
+static int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
+				       enum snd_soc_bias_level level)
+{
+	struct snd_soc_card *card = socdev->card;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		dev_dbg(socdev->dev, "Setting full bias\n");
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		dev_dbg(socdev->dev, "Setting bias prepare\n");
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		dev_dbg(socdev->dev, "Setting standby bias\n");
+		break;
+	case SND_SOC_BIAS_OFF:
+		dev_dbg(socdev->dev, "Setting bias off\n");
+		break;
+	default:
+		dev_err(socdev->dev, "Setting invalid bias %d\n", level);
+		return -EINVAL;
+	}
+
+	if (card->set_bias_level)
+		ret = card->set_bias_level(card, level);
+	if (ret == 0 && codec->set_bias_level)
+		ret = codec->set_bias_level(codec, level);
+
+	return ret;
+}
+
 /* set up initial codec paths */
 static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	struct snd_soc_dapm_path *p, int i)
@@ -165,6 +205,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	case snd_soc_dapm_dac:
 	case snd_soc_dapm_micbias:
 	case snd_soc_dapm_vmid:
+	case snd_soc_dapm_supply:
 		p->connect = 1;
 	break;
 	/* does effect routing - dynamically connected */
@@ -179,7 +220,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	}
 }
 
-/* connect mux widget to it's interconnecting audio paths */
+/* connect mux widget to its interconnecting audio paths */
 static int dapm_connect_mux(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
 	struct snd_soc_dapm_path *path, const char *control_name,
@@ -202,7 +243,7 @@ static int dapm_connect_mux(struct snd_soc_codec *codec,
 	return -ENODEV;
 }
 
-/* connect mixer widget to it's interconnecting audio paths */
+/* connect mixer widget to its interconnecting audio paths */
 static int dapm_connect_mixer(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
 	struct snd_soc_dapm_path *path, const char *control_name)
@@ -357,8 +398,9 @@ static int dapm_new_mixer(struct snd_soc_codec *codec,
 				path->long_name);
 			ret = snd_ctl_add(codec->card, path->kcontrol);
 			if (ret < 0) {
-				printk(KERN_ERR "asoc: failed to add dapm kcontrol %s\n",
-						path->long_name);
+				printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n",
+				       path->long_name,
+				       ret);
 				kfree(path->long_name);
 				path->long_name = NULL;
 				return ret;
@@ -434,6 +476,9 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget)
 	struct snd_soc_dapm_path *path;
 	int con = 0;
 
+	if (widget->id == snd_soc_dapm_supply)
+		return 0;
+
 	if (widget->id == snd_soc_dapm_adc && widget->active)
 		return 1;
 
@@ -470,6 +515,9 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget)
 	struct snd_soc_dapm_path *path;
 	int con = 0;
 
+	if (widget->id == snd_soc_dapm_supply)
+		return 0;
+
 	/* active stream ? */
 	if (widget->id == snd_soc_dapm_dac && widget->active)
 		return 1;
@@ -521,84 +569,12 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w,
 }
 EXPORT_SYMBOL_GPL(dapm_reg_event);
 
-/*
- * Scan a single DAPM widget for a complete audio path and update the
- * power status appropriately.
+/* Standard power change method, used to apply power changes to most
+ * widgets.
  */
-static int dapm_power_widget(struct snd_soc_codec *codec, int event,
-			     struct snd_soc_dapm_widget *w)
+static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
 {
-	int in, out, power_change, power, ret;
-
-	/* vmid - no action */
-	if (w->id == snd_soc_dapm_vmid)
-		return 0;
-
-	/* active ADC */
-	if (w->id == snd_soc_dapm_adc && w->active) {
-		in = is_connected_input_ep(w);
-		dapm_clear_walk(w->codec);
-		w->power = (in != 0) ? 1 : 0;
-		dapm_update_bits(w);
-		return 0;
-	}
-
-	/* active DAC */
-	if (w->id == snd_soc_dapm_dac && w->active) {
-		out = is_connected_output_ep(w);
-		dapm_clear_walk(w->codec);
-		w->power = (out != 0) ? 1 : 0;
-		dapm_update_bits(w);
-		return 0;
-	}
-
-	/* pre and post event widgets */
-	if (w->id == snd_soc_dapm_pre) {
-		if (!w->event)
-			return 0;
-
-		if (event == SND_SOC_DAPM_STREAM_START) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_PRE_PMU);
-			if (ret < 0)
-				return ret;
-		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_PRE_PMD);
-			if (ret < 0)
-				return ret;
-		}
-		return 0;
-	}
-	if (w->id == snd_soc_dapm_post) {
-		if (!w->event)
-			return 0;
-
-		if (event == SND_SOC_DAPM_STREAM_START) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_POST_PMU);
-			if (ret < 0)
-				return ret;
-		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-			ret = w->event(w,
-				       NULL, SND_SOC_DAPM_POST_PMD);
-			if (ret < 0)
-				return ret;
-		}
-		return 0;
-	}
-
-	/* all other widgets */
-	in = is_connected_input_ep(w);
-	dapm_clear_walk(w->codec);
-	out = is_connected_output_ep(w);
-	dapm_clear_walk(w->codec);
-	power = (out != 0 && in != 0) ? 1 : 0;
-	power_change = (w->power == power) ? 0 : 1;
-	w->power = power;
-
-	if (!power_change)
-		return 0;
+	int ret;
 
 	/* call any power change event handlers */
 	if (w->event)
@@ -607,7 +583,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 			 w->name, w->event_flags);
 
 	/* power up pre event */
-	if (power && w->event &&
+	if (w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
 		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
 		if (ret < 0)
@@ -615,7 +591,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	}
 
 	/* power down pre event */
-	if (!power && w->event &&
+	if (!w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
 		ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
 		if (ret < 0)
@@ -623,17 +599,17 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	}
 
 	/* Lower PGA volume to reduce pops */
-	if (w->id == snd_soc_dapm_pga && !power)
-		dapm_set_pga(w, power);
+	if (w->id == snd_soc_dapm_pga && !w->power)
+		dapm_set_pga(w, w->power);
 
 	dapm_update_bits(w);
 
 	/* Raise PGA volume to reduce pops */
-	if (w->id == snd_soc_dapm_pga && power)
-		dapm_set_pga(w, power);
+	if (w->id == snd_soc_dapm_pga && w->power)
+		dapm_set_pga(w, w->power);
 
 	/* power up post event */
-	if (power && w->event &&
+	if (w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
 		ret = w->event(w,
 			       NULL, SND_SOC_DAPM_POST_PMU);
@@ -642,7 +618,7 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	}
 
 	/* power down post event */
-	if (!power && w->event &&
+	if (!w->power && w->event &&
 	    (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
 		ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
 		if (ret < 0)
@@ -652,6 +628,116 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
 	return 0;
 }
 
+/* Generic check to see if a widget should be powered.
+ */
+static int dapm_generic_check_power(struct snd_soc_dapm_widget *w)
+{
+	int in, out;
+
+	in = is_connected_input_ep(w);
+	dapm_clear_walk(w->codec);
+	out = is_connected_output_ep(w);
+	dapm_clear_walk(w->codec);
+	return out != 0 && in != 0;
+}
+
+/* Check to see if an ADC has power */
+static int dapm_adc_check_power(struct snd_soc_dapm_widget *w)
+{
+	int in;
+
+	if (w->active) {
+		in = is_connected_input_ep(w);
+		dapm_clear_walk(w->codec);
+		return in != 0;
+	} else {
+		return dapm_generic_check_power(w);
+	}
+}
+
+/* Check to see if a DAC has power */
+static int dapm_dac_check_power(struct snd_soc_dapm_widget *w)
+{
+	int out;
+
+	if (w->active) {
+		out = is_connected_output_ep(w);
+		dapm_clear_walk(w->codec);
+		return out != 0;
+	} else {
+		return dapm_generic_check_power(w);
+	}
+}
+
+/* Check to see if a power supply is needed */
+static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *path;
+	int power = 0;
+
+	/* Check if one of our outputs is connected */
+	list_for_each_entry(path, &w->sinks, list_source) {
+		if (path->sink && path->sink->power_check &&
+		    path->sink->power_check(path->sink)) {
+			power = 1;
+			break;
+		}
+	}
+
+	dapm_clear_walk(w->codec);
+
+	return power;
+}
+
+/*
+ * Scan a single DAPM widget for a complete audio path and update the
+ * power status appropriately.
+ */
+static int dapm_power_widget(struct snd_soc_codec *codec, int event,
+			     struct snd_soc_dapm_widget *w)
+{
+	int ret;
+
+	switch (w->id) {
+	case snd_soc_dapm_pre:
+		if (!w->event)
+			return 0;
+
+		if (event == SND_SOC_DAPM_STREAM_START) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_PRE_PMU);
+			if (ret < 0)
+				return ret;
+		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_PRE_PMD);
+			if (ret < 0)
+				return ret;
+		}
+		return 0;
+
+	case snd_soc_dapm_post:
+		if (!w->event)
+			return 0;
+
+		if (event == SND_SOC_DAPM_STREAM_START) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_POST_PMU);
+			if (ret < 0)
+				return ret;
+		} else if (event == SND_SOC_DAPM_STREAM_STOP) {
+			ret = w->event(w,
+				       NULL, SND_SOC_DAPM_POST_PMD);
+			if (ret < 0)
+				return ret;
+		}
+		return 0;
+
+	default:
+		return dapm_generic_apply_power(w);
+	}
+}
+
 /*
  * Scan each dapm widget for complete audio path.
  * A complete path is a route that has valid endpoints i.e.:-
@@ -663,31 +749,102 @@ static int dapm_power_widget(struct snd_soc_codec *codec, int event,
  */
 static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 {
+	struct snd_soc_device *socdev = codec->socdev;
 	struct snd_soc_dapm_widget *w;
-	int i, c = 1, *seq = NULL, ret = 0;
-
-	/* do we have a sequenced stream event */
-	if (event == SND_SOC_DAPM_STREAM_START) {
-		c = ARRAY_SIZE(dapm_up_seq);
-		seq = dapm_up_seq;
-	} else if (event == SND_SOC_DAPM_STREAM_STOP) {
-		c = ARRAY_SIZE(dapm_down_seq);
-		seq = dapm_down_seq;
+	int ret = 0;
+	int i, power;
+	int sys_power = 0;
+
+	INIT_LIST_HEAD(&codec->up_list);
+	INIT_LIST_HEAD(&codec->down_list);
+
+	/* Check which widgets we need to power and store them in
+	 * lists indicating if they should be powered up or down.
+	 */
+	list_for_each_entry(w, &codec->dapm_widgets, list) {
+		switch (w->id) {
+		case snd_soc_dapm_pre:
+			list_add_tail(&codec->down_list, &w->power_list);
+			break;
+		case snd_soc_dapm_post:
+			list_add_tail(&codec->up_list, &w->power_list);
+			break;
+
+		default:
+			if (!w->power_check)
+				continue;
+
+			power = w->power_check(w);
+			if (power)
+				sys_power = 1;
+
+			if (w->power == power)
+				continue;
+
+			if (power)
+				list_add_tail(&w->power_list, &codec->up_list);
+			else
+				list_add_tail(&w->power_list,
+					      &codec->down_list);
+
+			w->power = power;
+			break;
+		}
 	}
 
-	for (i = 0; i < c; i++) {
-		list_for_each_entry(w, &codec->dapm_widgets, list) {
+	/* If we're changing to all on or all off then prepare */
+	if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
+	    (!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_PREPARE);
+		if (ret != 0)
+			pr_err("Failed to prepare bias: %d\n", ret);
+	}
 
+	/* Power down widgets first; try to avoid amplifying pops. */
+	for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) {
+		list_for_each_entry(w, &codec->down_list, power_list) {
 			/* is widget in stream order */
-			if (seq && seq[i] && w->id != seq[i])
+			if (w->id != dapm_down_seq[i])
 				continue;
 
 			ret = dapm_power_widget(codec, event, w);
 			if (ret != 0)
-				return ret;
+				pr_err("Failed to power down %s: %d\n",
+				       w->name, ret);
 		}
 	}
 
+	/* Now power up. */
+	for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) {
+		list_for_each_entry(w, &codec->up_list, power_list) {
+			/* is widget in stream order */
+			if (w->id != dapm_up_seq[i])
+				continue;
+
+			ret = dapm_power_widget(codec, event, w);
+			if (ret != 0)
+				pr_err("Failed to power up %s: %d\n",
+				       w->name, ret);
+		}
+	}
+
+	/* If we just powered the last thing off drop to standby bias */
+	if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_STANDBY);
+		if (ret != 0)
+			pr_err("Failed to apply standby bias: %d\n", ret);
+	}
+
+	/* If we just powered up then move to active bias */
+	if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
+		ret = snd_soc_dapm_set_bias_level(socdev,
+						  SND_SOC_BIAS_ON);
+		if (ret != 0)
+			pr_err("Failed to apply active bias: %d\n", ret);
+	}
+
 	return 0;
 }
 
@@ -723,6 +880,7 @@ static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action)
 		case snd_soc_dapm_pga:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+		case snd_soc_dapm_supply:
 			if (w->name) {
 				in = is_connected_input_ep(w);
 				dapm_clear_walk(w->codec);
@@ -851,6 +1009,7 @@ static ssize_t dapm_widget_show(struct device *dev,
 		case snd_soc_dapm_pga:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+		case snd_soc_dapm_supply:
 			if (w->name)
 				count += sprintf(buf + count, "%s: %s\n",
 					w->name, w->power ? "On":"Off");
@@ -883,16 +1042,12 @@ static DEVICE_ATTR(dapm_widget, 0444, dapm_widget_show, NULL);
 
 int snd_soc_dapm_sys_add(struct device *dev)
 {
-	if (!dapm_status)
-		return 0;
 	return device_create_file(dev, &dev_attr_dapm_widget);
 }
 
 static void snd_soc_dapm_sys_remove(struct device *dev)
 {
-	if (dapm_status) {
-		device_remove_file(dev, &dev_attr_dapm_widget);
-	}
+	device_remove_file(dev, &dev_attr_dapm_widget);
 }
 
 /* free all dapm widgets and resources */
@@ -1015,6 +1170,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_codec *codec,
 	case snd_soc_dapm_vmid:
 	case snd_soc_dapm_pre:
 	case snd_soc_dapm_post:
+	case snd_soc_dapm_supply:
 		list_add(&path->list, &codec->dapm_paths);
 		list_add(&path->list_sink, &wsink->sources);
 		list_add(&path->list_source, &wsource->sinks);
@@ -1108,15 +1264,22 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
 		case snd_soc_dapm_switch:
 		case snd_soc_dapm_mixer:
 		case snd_soc_dapm_mixer_named_ctl:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_mixer(codec, w);
 			break;
 		case snd_soc_dapm_mux:
 		case snd_soc_dapm_value_mux:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_mux(codec, w);
 			break;
 		case snd_soc_dapm_adc:
+			w->power_check = dapm_adc_check_power;
+			break;
 		case snd_soc_dapm_dac:
+			w->power_check = dapm_dac_check_power;
+			break;
 		case snd_soc_dapm_pga:
+			w->power_check = dapm_generic_check_power;
 			dapm_new_pga(codec, w);
 			break;
 		case snd_soc_dapm_input:
@@ -1126,6 +1289,10 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
 		case snd_soc_dapm_hp:
 		case snd_soc_dapm_mic:
 		case snd_soc_dapm_line:
+			w->power_check = dapm_generic_check_power;
+			break;
+		case snd_soc_dapm_supply:
+			w->power_check = dapm_supply_check_power;
 		case snd_soc_dapm_vmid:
 		case snd_soc_dapm_pre:
 		case snd_soc_dapm_post:
@@ -1626,35 +1793,11 @@ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec,
 EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event);
 
 /**
- * snd_soc_dapm_set_bias_level - set the bias level for the system
- * @socdev: audio device
- * @level: level to configure
- *
- * Configure the bias (power) levels for the SoC audio device.
- *
- * Returns 0 for success else error.
- */
-int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
-				enum snd_soc_bias_level level)
-{
-	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret = 0;
-
-	if (card->set_bias_level)
-		ret = card->set_bias_level(card, level);
-	if (ret == 0 && codec->set_bias_level)
-		ret = codec->set_bias_level(codec, level);
-
-	return ret;
-}
-
-/**
  * snd_soc_dapm_enable_pin - enable pin.
  * @codec: SoC codec
  * @pin: pin name
  *
- * Enables input/output pin and it's parents or children widgets iff there is
+ * Enables input/output pin and its parents or children widgets iff there is
  * a valid audio route and active audio stream.
  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
  * do any widget power switching.
@@ -1670,7 +1813,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin);
  * @codec: SoC codec
  * @pin: pin name
  *
- * Disables input/output pin and it's parents or children widgets.
+ * Disables input/output pin and its parents or children widgets.
  * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
  * do any widget power switching.
  */
diff --git a/sound/soc/txx9/Kconfig b/sound/soc/txx9/Kconfig
new file mode 100644
index 00000000000..ebc9327eae7
--- /dev/null
+++ b/sound/soc/txx9/Kconfig
@@ -0,0 +1,29 @@
+##
+## TXx9 ACLC
+##
+config SND_SOC_TXX9ACLC
+	tristate "SoC Audio for TXx9"
+	depends on HAS_TXX9_ACLC && TXX9_DMAC
+	help
+	  This option enables support for the AC Link Controllers in TXx9 SoC.
+
+config HAS_TXX9_ACLC
+	bool
+
+config SND_SOC_TXX9ACLC_AC97
+	tristate
+	select AC97_BUS
+	select SND_AC97_CODEC
+	select SND_SOC_AC97_BUS
+
+
+##
+## Boards
+##
+config SND_SOC_TXX9ACLC_GENERIC
+	tristate "Generic TXx9 ACLC sound machine"
+	depends on SND_SOC_TXX9ACLC
+	select SND_SOC_TXX9ACLC_AC97
+	select SND_SOC_AC97_CODEC
+	help
+	  This is a generic AC97 sound machine for use in TXx9 based systems.
diff --git a/sound/soc/txx9/Makefile b/sound/soc/txx9/Makefile
new file mode 100644
index 00000000000..551f16c0c4f
--- /dev/null
+++ b/sound/soc/txx9/Makefile
@@ -0,0 +1,11 @@
+# Platform
+snd-soc-txx9aclc-objs := txx9aclc.o
+snd-soc-txx9aclc-ac97-objs := txx9aclc-ac97.o
+
+obj-$(CONFIG_SND_SOC_TXX9ACLC) += snd-soc-txx9aclc.o
+obj-$(CONFIG_SND_SOC_TXX9ACLC_AC97) += snd-soc-txx9aclc-ac97.o
+
+# Machine
+snd-soc-txx9aclc-generic-objs := txx9aclc-generic.o
+
+obj-$(CONFIG_SND_SOC_TXX9ACLC_GENERIC) += snd-soc-txx9aclc-generic.o
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
new file mode 100644
index 00000000000..0f83bdb9b16
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -0,0 +1,255 @@
+/*
+ * TXx9 ACLC AC97 driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "txx9aclc.h"
+
+#define AC97_DIR	\
+	(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
+
+#define AC97_RATES	\
+	SNDRV_PCM_RATE_8000_48000
+
+#ifdef __BIG_ENDIAN
+#define AC97_FMTS	SNDRV_PCM_FMTBIT_S16_BE
+#else
+#define AC97_FMTS	SNDRV_PCM_FMTBIT_S16_LE
+#endif
+
+static DECLARE_WAIT_QUEUE_HEAD(ac97_waitq);
+
+/* REVISIT: How to find txx9aclc_soc_device from snd_ac97? */
+static struct txx9aclc_soc_device *txx9aclc_soc_dev;
+
+static int txx9aclc_regready(struct txx9aclc_soc_device *dev)
+{
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+
+	return __raw_readl(drvdata->base + ACINTSTS) & ACINT_REGACCRDY;
+}
+
+/* AC97 controller reads codec register */
+static unsigned short txx9aclc_ac97_read(struct snd_ac97 *ac97,
+					 unsigned short reg)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	u32 dat;
+
+	if (!(__raw_readl(base + ACINTSTS) & ACINT_CODECRDY(ac97->num)))
+		return 0xffff;
+	reg |= ac97->num << 7;
+	dat = (reg << ACREGACC_REG_SHIFT) | ACREGACC_READ;
+	__raw_writel(dat, base + ACREGACC);
+	__raw_writel(ACINT_REGACCRDY, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) {
+		__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+		dev_err(dev->soc_dev.dev, "ac97 read timeout (reg %#x)\n", reg);
+		dat = 0xffff;
+		goto done;
+	}
+	dat = __raw_readl(base + ACREGACC);
+	if (((dat >> ACREGACC_REG_SHIFT) & 0xff) != reg) {
+		dev_err(dev->soc_dev.dev, "reg mismatch %x with %x\n",
+			dat, reg);
+		dat = 0xffff;
+		goto done;
+	}
+	dat = (dat >> ACREGACC_DAT_SHIFT) & 0xffff;
+done:
+	__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+	return dat;
+}
+
+/* AC97 controller writes to codec register */
+static void txx9aclc_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+				unsigned short val)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+
+	__raw_writel(((reg | (ac97->num << 7)) << ACREGACC_REG_SHIFT) |
+		     (val << ACREGACC_DAT_SHIFT),
+		     base + ACREGACC);
+	__raw_writel(ACINT_REGACCRDY, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq, txx9aclc_regready(dev), HZ)) {
+		dev_err(dev->soc_dev.dev,
+			"ac97 write timeout (reg %#x)\n", reg);
+	}
+	__raw_writel(ACINT_REGACCRDY, base + ACINTDIS);
+}
+
+static void txx9aclc_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct txx9aclc_soc_device *dev = txx9aclc_soc_dev;
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	u32 ready = ACINT_CODECRDY(ac97->num) | ACINT_REGACCRDY;
+
+	__raw_writel(ACCTL_ENLINK, base + ACCTLDIS);
+	mmiowb();
+	udelay(1);
+	__raw_writel(ACCTL_ENLINK, base + ACCTLEN);
+	/* wait for primary codec ready status */
+	__raw_writel(ready, base + ACINTEN);
+	if (!wait_event_timeout(ac97_waitq,
+				(__raw_readl(base + ACINTSTS) & ready) == ready,
+				HZ)) {
+		dev_err(&ac97->dev, "primary codec is not ready "
+			"(status %#x)\n",
+			__raw_readl(base + ACINTSTS));
+	}
+	__raw_writel(ACINT_REGACCRDY, base + ACINTSTS);
+	__raw_writel(ready, base + ACINTDIS);
+}
+
+/* AC97 controller operations */
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= txx9aclc_ac97_read,
+	.write		= txx9aclc_ac97_write,
+	.reset		= txx9aclc_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static irqreturn_t txx9aclc_ac97_irq(int irq, void *dev_id)
+{
+	struct txx9aclc_plat_drvdata *drvdata = dev_id;
+	void __iomem *base = drvdata->base;
+
+	__raw_writel(__raw_readl(base + ACINTMSTS), base + ACINTDIS);
+	wake_up(&ac97_waitq);
+	return IRQ_HANDLED;
+}
+
+static int txx9aclc_ac97_probe(struct platform_device *pdev,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+
+	dev->aclc_pdev = to_platform_device(dai->dev);
+	txx9aclc_soc_dev = dev;
+	return 0;
+}
+
+static void txx9aclc_ac97_remove(struct platform_device *pdev,
+				 struct snd_soc_dai *dai)
+{
+	struct platform_device *aclc_pdev = to_platform_device(dai->dev);
+	struct txx9aclc_plat_drvdata *drvdata = platform_get_drvdata(aclc_pdev);
+
+	/* disable AC-link */
+	__raw_writel(ACCTL_ENLINK, drvdata->base + ACCTLDIS);
+	txx9aclc_soc_dev = NULL;
+}
+
+struct snd_soc_dai txx9aclc_ac97_dai = {
+	.name			= "txx9aclc_ac97",
+	.ac97_control		= 1,
+	.probe			= txx9aclc_ac97_probe,
+	.remove			= txx9aclc_ac97_remove,
+	.playback = {
+		.rates		= AC97_RATES,
+		.formats	= AC97_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 2,
+	},
+	.capture = {
+		.rates		= AC97_RATES,
+		.formats	= AC97_FMTS,
+		.channels_min	= 2,
+		.channels_max	= 2,
+	},
+};
+EXPORT_SYMBOL_GPL(txx9aclc_ac97_dai);
+
+static int __devinit txx9aclc_ac97_dev_probe(struct platform_device *pdev)
+{
+	struct txx9aclc_plat_drvdata *drvdata;
+	struct resource *r;
+	int err;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -EBUSY;
+
+	if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
+				     dev_name(&pdev->dev)))
+		return -EBUSY;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, drvdata);
+	drvdata->physbase = r->start;
+	if (sizeof(drvdata->physbase) > sizeof(r->start) &&
+	    r->start >= TXX9_DIRECTMAP_BASE &&
+	    r->start < TXX9_DIRECTMAP_BASE + 0x400000)
+		drvdata->physbase |= 0xf00000000ull;
+	drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!drvdata->base)
+		return -EBUSY;
+	err = devm_request_irq(&pdev->dev, irq, txx9aclc_ac97_irq,
+			       IRQF_DISABLED, dev_name(&pdev->dev), drvdata);
+	if (err < 0)
+		return err;
+
+	txx9aclc_ac97_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&txx9aclc_ac97_dai);
+}
+
+static int __devexit txx9aclc_ac97_dev_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&txx9aclc_ac97_dai);
+	return 0;
+}
+
+static struct platform_driver txx9aclc_ac97_driver = {
+	.probe		= txx9aclc_ac97_dev_probe,
+	.remove		= __devexit_p(txx9aclc_ac97_dev_remove),
+	.driver		= {
+		.name	= "txx9aclc-ac97",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init txx9aclc_ac97_init(void)
+{
+	return platform_driver_register(&txx9aclc_ac97_driver);
+}
+
+static void __exit txx9aclc_ac97_exit(void)
+{
+	platform_driver_unregister(&txx9aclc_ac97_driver);
+}
+
+module_init(txx9aclc_ac97_init);
+module_exit(txx9aclc_ac97_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TXx9 ACLC AC97 driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c
new file mode 100644
index 00000000000..3175de9a92c
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc-generic.c
@@ -0,0 +1,98 @@
+/*
+ * Generic TXx9 ACLC machine driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is a very generic AC97 sound machine driver for boards which
+ * have (AC97) audio at ACLC (e.g. RBTX49XX boards).
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "../codecs/ac97.h"
+#include "txx9aclc.h"
+
+static struct snd_soc_dai_link txx9aclc_generic_dai = {
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai = &txx9aclc_ac97_dai,
+	.codec_dai = &ac97_dai,
+};
+
+static struct snd_soc_card txx9aclc_generic_card = {
+	.name		= "Generic TXx9 ACLC Audio",
+	.platform	= &txx9aclc_soc_platform,
+	.dai_link	= &txx9aclc_generic_dai,
+	.num_links	= 1,
+};
+
+static struct txx9aclc_soc_device txx9aclc_generic_soc_device = {
+	.soc_dev = {
+		.card		= &txx9aclc_generic_card,
+		.codec_dev	= &soc_codec_dev_ac97,
+	},
+};
+
+static int __init txx9aclc_generic_probe(struct platform_device *pdev)
+{
+	struct txx9aclc_soc_device *dev = &txx9aclc_generic_soc_device;
+	struct platform_device *soc_pdev;
+	int ret;
+
+	soc_pdev = platform_device_alloc("soc-audio", -1);
+	if (!soc_pdev)
+		return -ENOMEM;
+	platform_set_drvdata(soc_pdev, &dev->soc_dev);
+	dev->soc_dev.dev = &soc_pdev->dev;
+	ret = platform_device_add(soc_pdev);
+	if (ret) {
+		platform_device_put(soc_pdev);
+		return ret;
+	}
+	platform_set_drvdata(pdev, soc_pdev);
+	return 0;
+}
+
+static int __exit txx9aclc_generic_remove(struct platform_device *pdev)
+{
+	struct platform_device *soc_pdev = platform_get_drvdata(pdev);
+
+	platform_device_unregister(soc_pdev);
+	return 0;
+}
+
+static struct platform_driver txx9aclc_generic_driver = {
+	.remove = txx9aclc_generic_remove,
+	.driver = {
+		.name = "txx9aclc-generic",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init txx9aclc_generic_init(void)
+{
+	return platform_driver_probe(&txx9aclc_generic_driver,
+				     txx9aclc_generic_probe);
+}
+
+static void __exit txx9aclc_generic_exit(void)
+{
+	platform_driver_unregister(&txx9aclc_generic_driver);
+}
+
+module_init(txx9aclc_generic_init);
+module_exit(txx9aclc_generic_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
new file mode 100644
index 00000000000..fa336616152
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc.c
@@ -0,0 +1,430 @@
+/*
+ * Generic TXx9 ACLC platform driver
+ *
+ * Copyright (C) 2009 Atsushi Nemoto
+ *
+ * Based on RBTX49xx patch from CELF patch archive.
+ * (C) Copyright TOSHIBA CORPORATION 2004-2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include "txx9aclc.h"
+
+static const struct snd_pcm_hardware txx9aclc_pcm_hardware = {
+	/*
+	 * REVISIT: SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID
+	 * needs more works for noncoherent MIPS.
+	 */
+	.info		  = SNDRV_PCM_INFO_INTERLEAVED |
+			    SNDRV_PCM_INFO_BATCH |
+			    SNDRV_PCM_INFO_PAUSE,
+#ifdef __BIG_ENDIAN
+	.formats	  = SNDRV_PCM_FMTBIT_S16_BE,
+#else
+	.formats	  = SNDRV_PCM_FMTBIT_S16_LE,
+#endif
+	.period_bytes_min = 1024,
+	.period_bytes_max = 8 * 1024,
+	.periods_min	  = 2,
+	.periods_max	  = 4096,
+	.buffer_bytes_max = 32 * 1024,
+};
+
+static int txx9aclc_pcm_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct txx9aclc_dmadata *dmadata = runtime->private_data;
+	int ret;
+
+	ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(socdev->dev,
+		"runtime->dma_area = %#lx dma_addr = %#lx dma_bytes = %zd "
+		"runtime->min_align %ld\n",
+		(unsigned long)runtime->dma_area,
+		(unsigned long)runtime->dma_addr, runtime->dma_bytes,
+		runtime->min_align);
+	dev_dbg(socdev->dev,
+		"periods %d period_bytes %d stream %d\n",
+		params_periods(params), params_period_bytes(params),
+		substream->stream);
+
+	dmadata->substream = substream;
+	dmadata->pos = 0;
+	return 0;
+}
+
+static int txx9aclc_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int txx9aclc_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct txx9aclc_dmadata *dmadata = runtime->private_data;
+
+	dmadata->dma_addr = runtime->dma_addr;
+	dmadata->buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
+	dmadata->period_bytes = snd_pcm_lib_period_bytes(substream);
+
+	if (dmadata->buffer_bytes == dmadata->period_bytes) {
+		dmadata->frag_bytes = dmadata->period_bytes >> 1;
+		dmadata->frags = 2;
+	} else {
+		dmadata->frag_bytes = dmadata->period_bytes;
+		dmadata->frags = dmadata->buffer_bytes / dmadata->period_bytes;
+	}
+	dmadata->frag_count = 0;
+	dmadata->pos = 0;
+	return 0;
+}
+
+static void txx9aclc_dma_complete(void *arg)
+{
+	struct txx9aclc_dmadata *dmadata = arg;
+	unsigned long flags;
+
+	/* dma completion handler cannot submit new operations */
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	if (dmadata->frag_count >= 0) {
+		dmadata->dmacount--;
+		BUG_ON(dmadata->dmacount < 0);
+		tasklet_schedule(&dmadata->tasklet);
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+}
+
+static struct dma_async_tx_descriptor *
+txx9aclc_dma_submit(struct txx9aclc_dmadata *dmadata, dma_addr_t buf_dma_addr)
+{
+	struct dma_chan *chan = dmadata->dma_chan;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist sg;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf_dma_addr)),
+		    dmadata->frag_bytes, buf_dma_addr & (PAGE_SIZE - 1));
+	sg_dma_address(&sg) = buf_dma_addr;
+	desc = chan->device->device_prep_slave_sg(chan, &sg, 1,
+		dmadata->substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		DMA_TO_DEVICE : DMA_FROM_DEVICE,
+		DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+		return NULL;
+	}
+	desc->callback = txx9aclc_dma_complete;
+	desc->callback_param = dmadata;
+	desc->tx_submit(desc);
+	return desc;
+}
+
+#define NR_DMA_CHAIN		2
+
+static void txx9aclc_dma_tasklet(unsigned long data)
+{
+	struct txx9aclc_dmadata *dmadata = (struct txx9aclc_dmadata *)data;
+	struct dma_chan *chan = dmadata->dma_chan;
+	struct dma_async_tx_descriptor *desc;
+	struct snd_pcm_substream *substream = dmadata->substream;
+	u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		ACCTL_AUDODMA : ACCTL_AUDIDMA;
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	if (dmadata->frag_count < 0) {
+		struct txx9aclc_soc_device *dev =
+			container_of(dmadata, struct txx9aclc_soc_device,
+				     dmadata[substream->stream]);
+		struct txx9aclc_plat_drvdata *drvdata =
+			txx9aclc_get_plat_drvdata(dev);
+		void __iomem *base = drvdata->base;
+
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		chan->device->device_terminate_all(chan);
+		/* first time */
+		for (i = 0; i < NR_DMA_CHAIN; i++) {
+			desc = txx9aclc_dma_submit(dmadata,
+				dmadata->dma_addr + i * dmadata->frag_bytes);
+			if (!desc)
+				return;
+		}
+		dmadata->dmacount = NR_DMA_CHAIN;
+		chan->device->device_issue_pending(chan);
+		spin_lock_irqsave(&dmadata->dma_lock, flags);
+		__raw_writel(ctlbit, base + ACCTLEN);
+		dmadata->frag_count = NR_DMA_CHAIN % dmadata->frags;
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		return;
+	}
+	BUG_ON(dmadata->dmacount >= NR_DMA_CHAIN);
+	while (dmadata->dmacount < NR_DMA_CHAIN) {
+		dmadata->dmacount++;
+		spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+		desc = txx9aclc_dma_submit(dmadata,
+			dmadata->dma_addr +
+			dmadata->frag_count * dmadata->frag_bytes);
+		if (!desc)
+			return;
+		chan->device->device_issue_pending(chan);
+
+		spin_lock_irqsave(&dmadata->dma_lock, flags);
+		dmadata->frag_count++;
+		dmadata->frag_count %= dmadata->frags;
+		dmadata->pos += dmadata->frag_bytes;
+		dmadata->pos %= dmadata->buffer_bytes;
+		if ((dmadata->frag_count * dmadata->frag_bytes) %
+		    dmadata->period_bytes == 0)
+			snd_pcm_period_elapsed(substream);
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+}
+
+static int txx9aclc_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct txx9aclc_soc_device *dev =
+		container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctlbit = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		ACCTL_AUDODMA : ACCTL_AUDIDMA;
+
+	spin_lock_irqsave(&dmadata->dma_lock, flags);
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		dmadata->frag_count = -1;
+		tasklet_schedule(&dmadata->tasklet);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		__raw_writel(ctlbit, base + ACCTLDIS);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		__raw_writel(ctlbit, base + ACCTLEN);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	spin_unlock_irqrestore(&dmadata->dma_lock, flags);
+	return ret;
+}
+
+static snd_pcm_uframes_t
+txx9aclc_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+
+	return bytes_to_frames(substream->runtime, dmadata->pos);
+}
+
+static int txx9aclc_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct txx9aclc_soc_device *dev =
+		container_of(rtd->socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_dmadata *dmadata = &dev->dmadata[substream->stream];
+	int ret;
+
+	ret = snd_soc_set_runtime_hwparams(substream, &txx9aclc_pcm_hardware);
+	if (ret)
+		return ret;
+	/* ensure that buffer size is a multiple of period size */
+	ret = snd_pcm_hw_constraint_integer(substream->runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+	substream->runtime->private_data = dmadata;
+	return 0;
+}
+
+static int txx9aclc_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct txx9aclc_dmadata *dmadata = substream->runtime->private_data;
+	struct dma_chan *chan = dmadata->dma_chan;
+
+	dmadata->frag_count = -1;
+	chan->device->device_terminate_all(chan);
+	return 0;
+}
+
+static struct snd_pcm_ops txx9aclc_pcm_ops = {
+	.open		= txx9aclc_pcm_open,
+	.close		= txx9aclc_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= txx9aclc_pcm_hw_params,
+	.hw_free	= txx9aclc_pcm_hw_free,
+	.prepare	= txx9aclc_pcm_prepare,
+	.trigger	= txx9aclc_pcm_trigger,
+	.pointer	= txx9aclc_pcm_pointer,
+};
+
+static void txx9aclc_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int txx9aclc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+			    struct snd_pcm *pcm)
+{
+	return snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+		card->dev, 64 * 1024, 4 * 1024 * 1024);
+}
+
+static bool filter(struct dma_chan *chan, void *param)
+{
+	struct txx9aclc_dmadata *dmadata = param;
+	char devname[BUS_ID_SIZE + 2];
+
+	sprintf(devname, "%s.%d", dmadata->dma_res->name,
+		(int)dmadata->dma_res->start);
+	if (strcmp(dev_name(chan->device->dev), devname) == 0) {
+		chan->private = &dmadata->dma_slave;
+		return true;
+	}
+	return false;
+}
+
+static int txx9aclc_dma_init(struct txx9aclc_soc_device *dev,
+			     struct txx9aclc_dmadata *dmadata)
+{
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	struct txx9dmac_slave *ds = &dmadata->dma_slave;
+	dma_cap_mask_t mask;
+
+	spin_lock_init(&dmadata->dma_lock);
+
+	ds->reg_width = sizeof(u32);
+	if (dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ds->tx_reg = drvdata->physbase + ACAUDODAT;
+		ds->rx_reg = 0;
+	} else {
+		ds->tx_reg = 0;
+		ds->rx_reg = drvdata->physbase + ACAUDIDAT;
+	}
+
+	/* Try to grab a DMA channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dmadata->dma_chan = dma_request_channel(mask, filter, dmadata);
+	if (!dmadata->dma_chan) {
+		dev_err(dev->soc_dev.dev,
+			"DMA channel for %s is not available\n",
+			dmadata->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+			"playback" : "capture");
+		return -EBUSY;
+	}
+	tasklet_init(&dmadata->tasklet, txx9aclc_dma_tasklet,
+		     (unsigned long)dmadata);
+	return 0;
+}
+
+static int txx9aclc_pcm_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+	struct resource *r;
+	int i;
+	int ret;
+
+	dev->dmadata[0].stream = SNDRV_PCM_STREAM_PLAYBACK;
+	dev->dmadata[1].stream = SNDRV_PCM_STREAM_CAPTURE;
+	for (i = 0; i < 2; i++) {
+		r = platform_get_resource(dev->aclc_pdev, IORESOURCE_DMA, i);
+		if (!r) {
+			ret = -EBUSY;
+			goto exit;
+		}
+		dev->dmadata[i].dma_res = r;
+		ret = txx9aclc_dma_init(dev, &dev->dmadata[i]);
+		if (ret)
+			goto exit;
+	}
+	return 0;
+
+exit:
+	for (i = 0; i < 2; i++) {
+		if (dev->dmadata[i].dma_chan)
+			dma_release_channel(dev->dmadata[i].dma_chan);
+		dev->dmadata[i].dma_chan = NULL;
+	}
+	return ret;
+}
+
+static int txx9aclc_pcm_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct txx9aclc_soc_device *dev =
+		container_of(socdev, struct txx9aclc_soc_device, soc_dev);
+	struct txx9aclc_plat_drvdata *drvdata = txx9aclc_get_plat_drvdata(dev);
+	void __iomem *base = drvdata->base;
+	int i;
+
+	/* disable all FIFO DMAs */
+	__raw_writel(ACCTL_AUDODMA | ACCTL_AUDIDMA, base + ACCTLDIS);
+	/* dummy R/W to clear pending DMAREQ if any */
+	__raw_writel(__raw_readl(base + ACAUDIDAT), base + ACAUDODAT);
+
+	for (i = 0; i < 2; i++) {
+		struct txx9aclc_dmadata *dmadata = &dev->dmadata[i];
+		struct dma_chan *chan = dmadata->dma_chan;
+		if (chan) {
+			dmadata->frag_count = -1;
+			chan->device->device_terminate_all(chan);
+			dma_release_channel(chan);
+		}
+		dev->dmadata[i].dma_chan = NULL;
+	}
+	return 0;
+}
+
+struct snd_soc_platform txx9aclc_soc_platform = {
+	.name		= "txx9aclc-audio",
+	.probe		= txx9aclc_pcm_probe,
+	.remove		= txx9aclc_pcm_remove,
+	.pcm_ops 	= &txx9aclc_pcm_ops,
+	.pcm_new	= txx9aclc_pcm_new,
+	.pcm_free	= txx9aclc_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(txx9aclc_soc_platform);
+
+static int __init txx9aclc_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&txx9aclc_soc_platform);
+}
+
+static void __exit txx9aclc_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&txx9aclc_soc_platform);
+}
+
+module_init(txx9aclc_soc_platform_init);
+module_exit(txx9aclc_soc_platform_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("TXx9 ACLC Audio DMA driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/txx9/txx9aclc.h b/sound/soc/txx9/txx9aclc.h
new file mode 100644
index 00000000000..6769aab41b3
--- /dev/null
+++ b/sound/soc/txx9/txx9aclc.h
@@ -0,0 +1,83 @@
+/*
+ * TXx9 SoC AC Link Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TXX9ACLC_H
+#define __TXX9ACLC_H
+
+#include <linux/interrupt.h>
+#include <asm/txx9/dmac.h>
+
+#define ACCTLEN			0x00	/* control enable */
+#define ACCTLDIS		0x04	/* control disable */
+#define   ACCTL_ENLINK		0x00000001	/* enable/disable AC-link */
+#define   ACCTL_AUDODMA		0x00000100	/* AUDODMA enable/disable */
+#define   ACCTL_AUDIDMA		0x00001000	/* AUDIDMA enable/disable */
+#define   ACCTL_AUDOEHLT	0x00010000	/* AUDO error halt
+						   enable/disable */
+#define   ACCTL_AUDIEHLT	0x00100000	/* AUDI error halt
+						   enable/disable */
+#define ACREGACC		0x08	/* codec register access */
+#define   ACREGACC_DAT_SHIFT	0	/* data field */
+#define   ACREGACC_REG_SHIFT	16	/* address field */
+#define   ACREGACC_CODECID_SHIFT	24	/* CODEC ID field */
+#define   ACREGACC_READ		0x80000000	/* CODEC read */
+#define   ACREGACC_WRITE	0x00000000	/* CODEC write */
+#define ACINTSTS		0x10	/* interrupt status */
+#define ACINTMSTS		0x14	/* interrupt masked status */
+#define ACINTEN			0x18	/* interrupt enable */
+#define ACINTDIS		0x1c	/* interrupt disable */
+#define   ACINT_CODECRDY(n)	(0x00000001 << (n))	/* CODECn ready */
+#define   ACINT_REGACCRDY	0x00000010	/* ACREGACC ready */
+#define   ACINT_AUDOERR		0x00000100	/* AUDO underrun error */
+#define   ACINT_AUDIERR		0x00001000	/* AUDI overrun error */
+#define ACDMASTS		0x80	/* DMA request status */
+#define   ACDMA_AUDO		0x00000001	/* AUDODMA pending */
+#define   ACDMA_AUDI		0x00000010	/* AUDIDMA pending */
+#define ACAUDODAT		0xa0	/* audio out data */
+#define ACAUDIDAT		0xb0	/* audio in data */
+#define ACREVID			0xfc	/* revision ID */
+
+struct txx9aclc_dmadata {
+	struct resource *dma_res;
+	struct txx9dmac_slave dma_slave;
+	struct dma_chan *dma_chan;
+	struct tasklet_struct tasklet;
+	spinlock_t dma_lock;
+	int stream; /* SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE */
+	struct snd_pcm_substream *substream;
+	unsigned long pos;
+	dma_addr_t dma_addr;
+	unsigned long buffer_bytes;
+	unsigned long period_bytes;
+	unsigned long frag_bytes;
+	int frags;
+	int frag_count;
+	int dmacount;
+};
+
+struct txx9aclc_plat_drvdata {
+	void __iomem *base;
+	u64 physbase;
+};
+
+struct txx9aclc_soc_device {
+	struct snd_soc_device soc_dev;
+	struct platform_device *aclc_pdev;	/* for ioresources, drvdata */
+	struct txx9aclc_dmadata dmadata[2];
+};
+
+static inline struct txx9aclc_plat_drvdata *txx9aclc_get_plat_drvdata(
+	struct txx9aclc_soc_device *sdev)
+{
+	return platform_get_drvdata(sdev->aclc_pdev);
+}
+
+extern struct snd_soc_platform txx9aclc_soc_platform;
+extern struct snd_soc_dai txx9aclc_ac97_dai;
+
+#endif /* __TXX9ACLC_H */
diff --git a/sound/synth/Makefile b/sound/synth/Makefile
index e99fd76caa1..11eb06ac2ec 100644
--- a/sound/synth/Makefile
+++ b/sound/synth/Makefile
@@ -5,16 +5,8 @@
 
 snd-util-mem-objs := util_mem.o
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_EMU10K1) += snd-util-mem.o
 obj-$(CONFIG_SND_TRIDENT) += snd-util-mem.o
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-util-mem.o
-obj-$(call sequencer,$(CONFIG_SND)) += emux/
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-util-mem.o
+obj-$(CONFIG_SND_SEQUENCER) += emux/
diff --git a/sound/synth/emux/Makefile b/sound/synth/emux/Makefile
index b69035240cf..328594e6152 100644
--- a/sound/synth/emux/Makefile
+++ b/sound/synth/emux/Makefile
@@ -7,14 +7,6 @@ snd-emux-synth-objs := emux.o emux_synth.o emux_seq.o emux_nrpn.o \
 		       emux_effect.o emux_proc.o emux_hwdep.o soundfont.o \
 		       $(if $(CONFIG_SND_SEQUENCER_OSS),emux_oss.o)
 
-#
-# this function returns:
-#   "m" - CONFIG_SND_SEQUENCER is m
-#   <empty string> - CONFIG_SND_SEQUENCER is undefined
-#   otherwise parameter #1 value
-#
-sequencer = $(if $(subst y,,$(CONFIG_SND_SEQUENCER)),$(if $(1),m),$(if $(CONFIG_SND_SEQUENCER),$(1)))
-
 # Toplevel Module Dependencies
-obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emux-synth.o
-obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-emux-synth.o
+obj-$(CONFIG_SND_SBAWE_SEQ) += snd-emux-synth.o
+obj-$(CONFIG_SND_EMU10K1_SEQ) += snd-emux-synth.o
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index b13ce767ac7..b1445134216 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -42,10 +42,10 @@
 	(stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
 
 static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
-	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | 
+	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 			   SNDRV_PCM_INFO_BLOCK_TRANSFER),
 	.formats 	= SNDRV_PCM_FMTBIT_S24_3BE,
-	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | 
+	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
 			   SNDRV_PCM_RATE_96000),
 	.rate_min	= 44100,
 	.rate_max	= 0, /* will overwrite later */
@@ -68,7 +68,7 @@ activate_substream(struct snd_usb_caiaqdev *dev,
 		dev->sub_capture[sub->number] = sub;
 }
 
-static void 
+static void
 deactivate_substream(struct snd_usb_caiaqdev *dev,
 		     struct snd_pcm_substream *sub)
 {
@@ -118,7 +118,7 @@ static int stream_start(struct snd_usb_caiaqdev *dev)
 			return -EPIPE;
 		}
 	}
-	
+
 	return 0;
 }
 
@@ -129,7 +129,7 @@ static void stream_stop(struct snd_usb_caiaqdev *dev)
 	debug("%s(%p)\n", __func__, dev);
 	if (!dev->streaming)
 		return;
-	
+
 	dev->streaming = 0;
 
 	for (i = 0; i < N_URBS; i++) {
@@ -154,7 +154,7 @@ static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream)
 	debug("%s(%p)\n", __func__, substream);
 	if (all_substreams_zero(dev->sub_playback) &&
 	    all_substreams_zero(dev->sub_capture)) {
-		/* when the last client has stopped streaming, 
+		/* when the last client has stopped streaming,
 		 * all sample rates are allowed again */
 		stream_stop(dev);
 		dev->pcm_info.rates = dev->samplerates;
@@ -194,7 +194,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	debug("%s(%p)\n", __func__, substream);
-	
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
 		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
@@ -205,19 +205,19 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 
 	if (dev->streaming)
 		return 0;
-	
+
 	/* the first client that opens a stream defines the sample rate
 	 * setting for all subsequent calls, until the last client closed. */
 	for (i=0; i < ARRAY_SIZE(rates); i++)
 		if (runtime->rate == rates[i])
 			dev->pcm_info.rates = 1 << i;
-	
+
 	snd_pcm_limit_hw_rates(runtime);
 
 	bytes_per_sample = BYTES_PER_SAMPLE;
 	if (dev->spec.data_alignment == 2)
 		bytes_per_sample++;
-	
+
 	bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
 		* bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
 
@@ -232,7 +232,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 	ret = stream_start(dev);
 	if (ret)
 		return ret;
-	
+
 	dev->output_running = 0;
 	wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
 	if (!dev->output_running) {
@@ -273,7 +273,7 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
 		return SNDRV_PCM_POS_XRUN;
 
 	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		return bytes_to_frames(sub->runtime, 
+		return bytes_to_frames(sub->runtime,
 					dev->audio_out_buf_pos[index]);
 	else
 		return bytes_to_frames(sub->runtime,
@@ -291,7 +291,7 @@ static struct snd_pcm_ops snd_usb_caiaq_ops = {
 	.trigger =	snd_usb_caiaq_pcm_trigger,
 	.pointer =	snd_usb_caiaq_pcm_pointer
 };
-	
+
 static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
 				      struct snd_pcm_substream **subs)
 {
@@ -333,7 +333,7 @@ static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev,
 				struct snd_pcm_runtime *rt = sub->runtime;
 				char *audio_buf = rt->dma_area;
 				int sz = frames_to_bytes(rt, rt->buffer_size);
-				audio_buf[dev->audio_in_buf_pos[stream]++] 
+				audio_buf[dev->audio_in_buf_pos[stream]++]
 					= usb_buf[i];
 				dev->period_in_count[stream]++;
 				if (dev->audio_in_buf_pos[stream] == sz)
@@ -354,14 +354,14 @@ static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
 
 	for (i = 0; i < iso->actual_length;) {
 		if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
-			for (stream = 0; 
-			     stream < dev->n_streams; 
+			for (stream = 0;
+			     stream < dev->n_streams;
 			     stream++, i++) {
 				if (dev->first_packet)
 					continue;
 
 				check_byte = MAKE_CHECKBYTE(dev, stream, i);
-				
+
 				if ((usb_buf[i] & 0x3f) != check_byte)
 					dev->input_panic = 1;
 
@@ -410,21 +410,21 @@ static void read_in_urb(struct snd_usb_caiaqdev *dev,
 	}
 
 	if ((dev->input_panic || dev->output_panic) && !dev->warned) {
-		debug("streaming error detected %s %s\n", 
+		debug("streaming error detected %s %s\n",
 				dev->input_panic ? "(input)" : "",
 				dev->output_panic ? "(output)" : "");
 		dev->warned = 1;
 	}
 }
 
-static void fill_out_urb(struct snd_usb_caiaqdev *dev, 
-			 struct urb *urb, 
+static void fill_out_urb(struct snd_usb_caiaqdev *dev,
+			 struct urb *urb,
 			 const struct usb_iso_packet_descriptor *iso)
 {
 	unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
 	struct snd_pcm_substream *sub;
 	int stream, i;
-	
+
 	for (i = 0; i < iso->length;) {
 		for (stream = 0; stream < dev->n_streams; stream++, i++) {
 			sub = dev->sub_playback[stream];
@@ -444,7 +444,7 @@ static void fill_out_urb(struct snd_usb_caiaqdev *dev,
 
 		/* fill in the check bytes */
 		if (dev->spec.data_alignment == 2 &&
-		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 
+		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) ==
 		    	(dev->n_streams * CHANNELS_PER_STREAM))
 		    for (stream = 0; stream < dev->n_streams; stream++, i++)
 		    	usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
@@ -453,7 +453,7 @@ static void fill_out_urb(struct snd_usb_caiaqdev *dev,
 
 static void read_completed(struct urb *urb)
 {
-	struct snd_usb_caiaq_cb_info *info = urb->context; 
+	struct snd_usb_caiaq_cb_info *info = urb->context;
 	struct snd_usb_caiaqdev *dev;
 	struct urb *out;
 	int frame, len, send_it = 0, outframe = 0;
@@ -478,7 +478,7 @@ static void read_completed(struct urb *urb)
 		out->iso_frame_desc[outframe].length = len;
 		out->iso_frame_desc[outframe].actual_length = 0;
 		out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
-		
+
 		if (len > 0) {
 			spin_lock(&dev->spinlock);
 			fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
@@ -497,14 +497,14 @@ static void read_completed(struct urb *urb)
 		out->transfer_flags = URB_ISO_ASAP;
 		usb_submit_urb(out, GFP_ATOMIC);
 	}
-	
+
 	/* re-submit inbound urb */
 	for (frame = 0; frame < FRAMES_PER_URB; frame++) {
 		urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
 		urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
 		urb->iso_frame_desc[frame].actual_length = 0;
 	}
-	
+
 	urb->number_of_packets = FRAMES_PER_URB;
 	urb->transfer_flags = URB_ISO_ASAP;
 	usb_submit_urb(urb, GFP_ATOMIC);
@@ -528,7 +528,7 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
 	struct usb_device *usb_dev = dev->chip.dev;
 	unsigned int pipe;
 
-	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? 
+	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ?
 		usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
 		usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
 
@@ -547,25 +547,25 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
 			return urbs;
 		}
 
-		urbs[i]->transfer_buffer = 
+		urbs[i]->transfer_buffer =
 			kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
 		if (!urbs[i]->transfer_buffer) {
 			log("unable to kmalloc() transfer buffer, OOM!?\n");
 			*ret = -ENOMEM;
 			return urbs;
 		}
-		
+
 		for (frame = 0; frame < FRAMES_PER_URB; frame++) {
-			struct usb_iso_packet_descriptor *iso = 
+			struct usb_iso_packet_descriptor *iso =
 				&urbs[i]->iso_frame_desc[frame];
-			
+
 			iso->offset = BYTES_PER_FRAME * frame;
 			iso->length = BYTES_PER_FRAME;
 		}
-		
+
 		urbs[i]->dev = usb_dev;
 		urbs[i]->pipe = pipe;
-		urbs[i]->transfer_buffer_length = FRAMES_PER_URB 
+		urbs[i]->transfer_buffer_length = FRAMES_PER_URB
 						* BYTES_PER_FRAME;
 		urbs[i]->context = &dev->data_cb_info[i];
 		urbs[i]->interval = 1;
@@ -589,7 +589,7 @@ static void free_urbs(struct urb **urbs)
 	for (i = 0; i < N_URBS; i++) {
 		if (!urbs[i])
 			continue;
-		
+
 		usb_kill_urb(urbs[i]);
 		kfree(urbs[i]->transfer_buffer);
 		usb_free_urb(urbs[i]);
@@ -602,11 +602,11 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 {
 	int i, ret;
 
-	dev->n_audio_in  = max(dev->spec.num_analog_audio_in, 
-			       dev->spec.num_digital_audio_in) / 
+	dev->n_audio_in  = max(dev->spec.num_analog_audio_in,
+			       dev->spec.num_digital_audio_in) /
 				CHANNELS_PER_STREAM;
 	dev->n_audio_out = max(dev->spec.num_analog_audio_out,
-			       dev->spec.num_digital_audio_out) / 
+			       dev->spec.num_digital_audio_out) /
 				CHANNELS_PER_STREAM;
 	dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
 
@@ -619,7 +619,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 		return -EINVAL;
 	}
 
-	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, 
+	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0,
 			dev->n_audio_out, dev->n_audio_in, &dev->pcm);
 
 	if (ret < 0) {
@@ -632,7 +632,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 
 	memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
 	memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
-	
+
 	memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
 			sizeof(snd_usb_caiaq_pcm_hardware));
 
@@ -651,9 +651,9 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 		break;
 	}
 
-	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, 
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK,
 				&snd_usb_caiaq_ops);
-	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, 
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE,
 				&snd_usb_caiaq_ops);
 
 	snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
@@ -662,7 +662,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 					MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
 
 	dev->data_cb_info =
-		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, 
+		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS,
 					GFP_KERNEL);
 
 	if (!dev->data_cb_info)
@@ -672,14 +672,14 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 		dev->data_cb_info[i].dev = dev;
 		dev->data_cb_info[i].index = i;
 	}
-	
+
 	dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
 	if (ret < 0) {
 		kfree(dev->data_cb_info);
 		free_urbs(dev->data_urbs_in);
 		return ret;
 	}
-	
+
 	dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
 	if (ret < 0) {
 		kfree(dev->data_cb_info);
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 515de1cd2a3..22406245a98 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.16");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
@@ -79,7 +79,7 @@ static struct usb_device_id snd_usb_id_table[] = {
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
 		.idVendor =	USB_VID_NATIVEINSTRUMENTS,
-		.idProduct =	USB_PID_RIGKONTROL2 
+		.idProduct =	USB_PID_RIGKONTROL2
 	},
 	{
 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
@@ -197,7 +197,7 @@ int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
 
 	if (buffer && len > 0)
 		memcpy(dev->ep1_out_buf+1, buffer, len);
-	
+
 	dev->ep1_out_buf[0] = command;
 	return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
 			   dev->ep1_out_buf, len+1, &actual_len, 200);
@@ -208,7 +208,7 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
 {
 	int ret;
 	char tmp[5];
-	
+
 	switch (rate) {
 	case 44100:	tmp[0] = SAMPLERATE_44100;   break;
 	case 48000:	tmp[0] = SAMPLERATE_48000;   break;
@@ -237,12 +237,12 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
 
 	if (ret)
 		return ret;
-	
-	if (!wait_event_timeout(dev->ep1_wait_queue, 
+
+	if (!wait_event_timeout(dev->ep1_wait_queue,
 	    dev->audio_parm_answer >= 0, HZ))
 		return -EPIPE;
-		
-	if (dev->audio_parm_answer != 1) 
+
+	if (dev->audio_parm_answer != 1)
 		debug("unable to set the device's audio params\n");
 	else
 		dev->bpp = bpp;
@@ -250,8 +250,8 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
 	return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
 }
 
-int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, 
-				int digital, int analog, int erp)
+int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *dev,
+			       int digital, int analog, int erp)
 {
 	char tmp[3] = { digital, analog, erp };
 	return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
@@ -262,7 +262,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 {
 	int ret;
 	char val[4];
-	
+
 	/* device-specific startup specials */
 	switch (dev->chip.usb_id) {
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
@@ -314,7 +314,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 			dev->control_state, 1);
 		break;
 	}
-	
+
 	if (dev->spec.num_analog_audio_out +
 	    dev->spec.num_analog_audio_in +
 	    dev->spec.num_digital_audio_out +
@@ -323,7 +323,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
 		if (ret < 0)
 			log("Unable to set up audio system (ret=%d)\n", ret);
 	}
-	
+
 	if (dev->spec.num_midi_in +
 	    dev->spec.num_midi_out > 0) {
 		ret = snd_usb_caiaq_midi_init(dev);
@@ -363,7 +363,7 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
 	if (devnum >= SNDRV_CARDS)
 		return -ENODEV;
 
-	err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, 
+	err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
 			      sizeof(struct snd_usb_caiaqdev), &card);
 	if (err < 0)
 		return err;
@@ -382,11 +382,11 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
 
 static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 {
-	char *c;
+	char *c, usbpath[32];
 	struct usb_device *usb_dev = dev->chip.dev;
 	struct snd_card *card = dev->chip.card;
 	int err, len;
-	
+
 	if (usb_set_interface(usb_dev, 0, 1) != 0) {
 		log("can't set alt interface.\n");
 		return -EIO;
@@ -395,19 +395,19 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 	usb_init_urb(&dev->ep1_in_urb);
 	usb_init_urb(&dev->midi_out_urb);
 
-	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, 
+	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
 			  usb_rcvbulkpipe(usb_dev, 0x1),
-			  dev->ep1_in_buf, EP1_BUFSIZE, 
+			  dev->ep1_in_buf, EP1_BUFSIZE,
 			  usb_ep1_command_reply_dispatch, dev);
 
-	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, 
+	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
 			  usb_sndbulkpipe(usb_dev, 0x1),
-			  dev->midi_out_buf, EP1_BUFSIZE, 
+			  dev->midi_out_buf, EP1_BUFSIZE,
 			  snd_usb_caiaq_midi_output_done, dev);
-	
+
 	init_waitqueue_head(&dev->ep1_wait_queue);
 	init_waitqueue_head(&dev->prepare_wait_queue);
-	
+
 	if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
 		return -EIO;
 
@@ -420,47 +420,52 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
 
 	usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
 		   dev->vendor_name, CAIAQ_USB_STR_LEN);
-	
+
 	usb_string(usb_dev, usb_dev->descriptor.iProduct,
 		   dev->product_name, CAIAQ_USB_STR_LEN);
-	
-	usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
-		   dev->serial, CAIAQ_USB_STR_LEN);
-
-	/* terminate serial string at first white space occurence */
-	c = strchr(dev->serial, ' ');
-	if (c)
-		*c = '\0';
-	
-	strcpy(card->driver, MODNAME);
-	strcpy(card->shortname, dev->product_name);
-
-	len = snprintf(card->longname, sizeof(card->longname),
-		       "%s %s (serial %s, ",
-		       dev->vendor_name, dev->product_name, dev->serial);
-
-	if (len < sizeof(card->longname) - 2)
-		len += usb_make_path(usb_dev, card->longname + len,
-				     sizeof(card->longname) - len);
-
-	card->longname[len++] = ')';
-	card->longname[len] = '\0';
+
+	strlcpy(card->driver, MODNAME, sizeof(card->driver));
+	strlcpy(card->shortname, dev->product_name, sizeof(card->shortname));
+	strlcpy(card->mixername, dev->product_name, sizeof(card->mixername));
+
+	/* if the id was not passed as module option, fill it with a shortened
+	 * version of the product string which does not contain any
+	 * whitespaces */
+
+	if (*card->id == '\0') {
+		char id[sizeof(card->id)];
+
+		memset(id, 0, sizeof(id));
+
+		for (c = card->shortname, len = 0;
+			*c && len < sizeof(card->id); c++)
+			if (*c != ' ')
+				id[len++] = *c;
+
+		snd_card_set_id(card, id);
+	}
+
+	usb_make_path(usb_dev, usbpath, sizeof(usbpath));
+	snprintf(card->longname, sizeof(card->longname),
+		       "%s %s (%s)",
+		       dev->vendor_name, dev->product_name, usbpath);
+
 	setup_card(dev);
 	return 0;
 }
 
-static int __devinit snd_probe(struct usb_interface *intf, 
+static int __devinit snd_probe(struct usb_interface *intf,
 		     const struct usb_device_id *id)
 {
 	int ret;
 	struct snd_card *card;
 	struct usb_device *device = interface_to_usbdev(intf);
-	
+
 	ret = create_card(device, &card);
-	
+
 	if (ret < 0)
 		return ret;
-			
+
 	usb_set_intfdata(intf, card);
 	ret = init_card(caiaqdev(card));
 	if (ret < 0) {
@@ -468,7 +473,7 @@ static int __devinit snd_probe(struct usb_interface *intf,
 		snd_card_free(card);
 		return ret;
 	}
-	
+
 	return 0;
 }
 
@@ -489,10 +494,10 @@ static void snd_disconnect(struct usb_interface *intf)
 	snd_usb_caiaq_input_free(dev);
 #endif
 	snd_usb_caiaq_audio_free(dev);
-	
+
 	usb_kill_urb(&dev->ep1_in_urb);
 	usb_kill_urb(&dev->midi_out_urb);
-	
+
 	snd_card_free(card);
 	usb_reset_device(interface_to_usbdev(intf));
 }
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index 4cce1ad7493..ece73514854 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -81,7 +81,6 @@ struct snd_usb_caiaqdev {
 
 	char vendor_name[CAIAQ_USB_STR_LEN];
 	char product_name[CAIAQ_USB_STR_LEN];
-	char serial[CAIAQ_USB_STR_LEN];
 
 	int n_streams, n_audio_in, n_audio_out;
 	int streaming, first_packet, output_running;
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 8fa8cd88d76..538e8c00d31 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -40,7 +40,7 @@ static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *subst
 
 	if (!dev)
 		return;
-	
+
 	dev->midi_receive_substream = up ? substream : NULL;
 }
 
@@ -64,18 +64,18 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
 				    struct snd_rawmidi_substream *substream)
 {
 	int len, ret;
-	
+
 	dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
 	dev->midi_out_buf[1] = 0; /* port */
 	len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
 				   EP1_BUFSIZE - 3);
-	
+
 	if (len <= 0)
 		return;
-	
+
 	dev->midi_out_buf[2] = len;
 	dev->midi_out_urb.transfer_buffer_length = len+3;
-	
+
 	ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
 	if (ret < 0)
 		log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
@@ -88,7 +88,7 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
 static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
 {
 	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
-	
+
 	if (up) {
 		dev->midi_out_substream = substream;
 		if (!dev->midi_out_active)
@@ -113,12 +113,12 @@ static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
 	.trigger =      snd_usb_caiaq_midi_input_trigger,
 };
 
-void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, 
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
 				     int port, const char *buf, int len)
 {
 	if (!dev->midi_receive_substream)
 		return;
-	
+
 	snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
 }
 
@@ -142,16 +142,16 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
 
 	if (device->spec.num_midi_out > 0) {
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
-		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, 
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
 				    &snd_usb_caiaq_midi_output);
 	}
 
 	if (device->spec.num_midi_in > 0) {
 		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
-		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, 
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
 				    &snd_usb_caiaq_midi_input);
 	}
-	
+
 	device->rmidi = rmidi;
 
 	return 0;
@@ -160,7 +160,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
 void snd_usb_caiaq_midi_output_done(struct urb* urb)
 {
 	struct snd_usb_caiaqdev *dev = urb->context;
-	
+
 	dev->midi_out_active = 0;
 	if (urb->status != 0)
 		return;
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 823296d7d57..c7b902358b7 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -627,6 +627,7 @@ static int prepare_playback_urb(struct snd_usb_substream *subs,
 	subs->hwptr_done += offs;
 	if (subs->hwptr_done >= runtime->buffer_size)
 		subs->hwptr_done -= runtime->buffer_size;
+	runtime->delay += offs;
 	spin_unlock_irqrestore(&subs->lock, flags);
 	urb->transfer_buffer_length = offs * stride;
 	if (period_elapsed)
@@ -636,12 +637,22 @@ static int prepare_playback_urb(struct snd_usb_substream *subs,
 
 /*
  * process after playback data complete
- * - nothing to do
+ * - decrease the delay count again
  */
 static int retire_playback_urb(struct snd_usb_substream *subs,
 			       struct snd_pcm_runtime *runtime,
 			       struct urb *urb)
 {
+	unsigned long flags;
+	int stride = runtime->frame_bits >> 3;
+	int processed = urb->transfer_buffer_length / stride;
+
+	spin_lock_irqsave(&subs->lock, flags);
+	if (processed > runtime->delay)
+		runtime->delay = 0;
+	else
+		runtime->delay -= processed;
+	spin_unlock_irqrestore(&subs->lock, flags);
 	return 0;
 }
 
@@ -1520,6 +1531,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
 	subs->hwptr_done = 0;
 	subs->transfer_done = 0;
 	subs->phase = 0;
+	runtime->delay = 0;
 
 	/* clear urbs (to be sure) */
 	deactivate_urbs(subs, 0, 1);
@@ -3279,6 +3291,25 @@ static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
 	return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
 }
 
+/*
+ * C-Media CM6206 is based on CM106 with two additional
+ * registers that are not documented in the data sheet.
+ * Values here are chosen based on sniffing USB traffic
+ * under Windows.
+ */
+static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
+{
+	int err, reg;
+	int val[] = {0x200c, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
+
+	for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
+		err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
+		if (err < 0)
+			return err;
+	}
+
+	return err;
+}
 
 /*
  * Setup quirks
@@ -3347,7 +3378,7 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip,
 		[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
 		[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
 		[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_RAW] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface,
 		[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
 		[QUIRK_MIDI_CME] = snd_usb_create_midi_interface,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
@@ -3565,6 +3596,12 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
 			goto __err_val;
 	}
 
+	/* C-Media CM6206 / CM106-Like Sound Device */
+	if (id == USB_ID(0x0d8c, 0x0102)) {
+		if (snd_usb_cm6206_boot_quirk(dev) < 0)
+			goto __err_val;
+	}
+
 	/*
 	 * found a config.  now register to ALSA
 	 */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 36e4f7a29ad..8e7f78941ba 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -153,7 +153,7 @@ enum quirk_type {
 	QUIRK_MIDI_YAMAHA,
 	QUIRK_MIDI_MIDIMAN,
 	QUIRK_MIDI_NOVATION,
-	QUIRK_MIDI_RAW,
+	QUIRK_MIDI_FASTLANE,
 	QUIRK_MIDI_EMAGIC,
 	QUIRK_MIDI_CME,
 	QUIRK_MIDI_US122L,
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 26bad373fe6..2fb35cc22a3 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1778,8 +1778,18 @@ int snd_usb_create_midi_interface(struct snd_usb_audio* chip,
 		umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
-	case QUIRK_MIDI_RAW:
+	case QUIRK_MIDI_FASTLANE:
 		umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
+		/*
+		 * Interface 1 contains isochronous endpoints, but with the same
+		 * numbers as in interface 0.  Since it is interface 1 that the
+		 * USB core has most recently seen, these descriptors are now
+		 * associated with the endpoint numbers.  This will foul up our
+		 * attempts to submit bulk/interrupt URBs to the endpoints in
+		 * interface 0, so we have to make sure that the USB core looks
+		 * again at interface 0 by calling usb_set_interface() on it.
+		 */
+		usb_set_interface(umidi->chip->dev, 0, 0);
 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
 	case QUIRK_MIDI_EMAGIC:
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ecb58e7a624..4bd3a7a0edc 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -423,7 +423,7 @@ static int set_ctl_value(struct usb_mixer_elem_info *cval, int request, int vali
 	value_set = convert_bytes_value(cval, value_set);
 	buf[0] = value_set & 0xff;
 	buf[1] = (value_set >> 8) & 0xff;
-	while (timeout -- > 0)
+	while (timeout-- > 0)
 		if (snd_usb_ctl_msg(cval->mixer->chip->dev,
 				    usb_sndctrlpipe(cval->mixer->chip->dev, 0),
 				    request,
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 647ef502965..f0f7624f917 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1470,6 +1470,41 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
+	/* Edirol M-16DX */
+	/* FIXME: This quirk gives a good-working capture stream but the
+	 *        playback seems problematic because of lacking of sync
+	 *        with capture stream.  It needs to sync with the capture
+	 *        clock.  As now, you'll get frequent sound distortions
+	 *        via the playback.
+	 */
+	USB_DEVICE(0x0582, 0x00c4),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+{
 	/* BOSS GT-10 */
 	USB_DEVICE(0x0582, 0x00da),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
@@ -1868,7 +1903,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		.data = & (const struct snd_usb_audio_quirk[]) {
 			{
 				.ifnum = 0,
-				.type = QUIRK_MIDI_RAW
+				.type = QUIRK_MIDI_FASTLANE
 			},
 			{
 				.ifnum = 1,
@@ -1951,6 +1986,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
+	USB_DEVICE(0x0ccd, 0x0028),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "TerraTec",
+		.product_name = "Aureon 5.1 MkII",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
+{
 	USB_DEVICE(0x0ccd, 0x0035),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Miditech",
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
new file mode 100644
index 00000000000..d69a759a104
--- /dev/null
+++ b/tools/perf/.gitignore
@@ -0,0 +1,16 @@
+PERF-BUILD-OPTIONS
+PERF-CFLAGS
+PERF-GUI-VARS
+PERF-VERSION-FILE
+perf
+perf-help
+perf-record
+perf-report
+perf-stat
+perf-top
+perf*.1
+perf*.xml
+common-cmds.h
+tags
+TAGS
+cscope*
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
new file mode 100644
index 00000000000..5457192e1b4
--- /dev/null
+++ b/tools/perf/Documentation/Makefile
@@ -0,0 +1,300 @@
+MAN1_TXT= \
+	$(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \
+		$(wildcard perf-*.txt)) \
+	perf.txt
+MAN5_TXT=
+MAN7_TXT=
+
+MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT)
+MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT))
+MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT))
+
+DOC_HTML=$(MAN_HTML)
+
+ARTICLES =
+# with their own formatting rules.
+SP_ARTICLES =
+API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technical/api-index.txt, $(wildcard technical/api-*.txt)))
+SP_ARTICLES += $(API_DOCS)
+SP_ARTICLES += technical/api-index
+
+DOC_HTML += $(patsubst %,%.html,$(ARTICLES) $(SP_ARTICLES))
+
+DOC_MAN1=$(patsubst %.txt,%.1,$(MAN1_TXT))
+DOC_MAN5=$(patsubst %.txt,%.5,$(MAN5_TXT))
+DOC_MAN7=$(patsubst %.txt,%.7,$(MAN7_TXT))
+
+prefix?=$(HOME)
+bindir?=$(prefix)/bin
+htmldir?=$(prefix)/share/doc/perf-doc
+pdfdir?=$(prefix)/share/doc/perf-doc
+mandir?=$(prefix)/share/man
+man1dir=$(mandir)/man1
+man5dir=$(mandir)/man5
+man7dir=$(mandir)/man7
+# DESTDIR=
+
+ASCIIDOC=asciidoc
+ASCIIDOC_EXTRA =
+MANPAGE_XSL = manpage-normal.xsl
+XMLTO_EXTRA =
+INSTALL?=install
+RM ?= rm -f
+DOC_REF = origin/man
+HTML_REF = origin/html
+
+infodir?=$(prefix)/share/info
+MAKEINFO=makeinfo
+INSTALL_INFO=install-info
+DOCBOOK2X_TEXI=docbook2x-texi
+DBLATEX=dblatex
+ifndef PERL_PATH
+	PERL_PATH = /usr/bin/perl
+endif
+
+-include ../config.mak.autogen
+-include ../config.mak
+
+#
+# For asciidoc ...
+#	-7.1.2,	no extra settings are needed.
+#	8.0-,	set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+#	-1.68.1,	set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+#	1.69.0,		no extra settings are needed?
+#	1.69.1-1.71.0,	set DOCBOOK_SUPPRESS_SP?
+#	1.71.1,		no extra settings are needed?
+#	1.72.0,		set DOCBOOK_XSL_172.
+#	1.73.0-,	set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
+ifdef ASCIIDOC8
+ASCIIDOC_EXTRA += -a asciidoc7compatible
+endif
+ifdef DOCBOOK_XSL_172
+ASCIIDOC_EXTRA += -a perf-asciidoc-no-roff
+MANPAGE_XSL = manpage-1.72.xsl
+else
+	ifdef ASCIIDOC_NO_ROFF
+	# docbook-xsl after 1.72 needs the regular XSL, but will not
+	# pass-thru raw roff codes from asciidoc.conf, so turn them off.
+	ASCIIDOC_EXTRA += -a perf-asciidoc-no-roff
+	endif
+endif
+ifdef MAN_BOLD_LITERAL
+XMLTO_EXTRA += -m manpage-bold-literal.xsl
+endif
+ifdef DOCBOOK_SUPPRESS_SP
+XMLTO_EXTRA += -m manpage-suppress-sp.xsl
+endif
+
+SHELL_PATH ?= $(SHELL)
+# Shell quote;
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
+
+#
+# Please note that there is a minor bug in asciidoc.
+# The version after 6.0.3 _will_ include the patch found here:
+#   http://marc.theaimsgroup.com/?l=perf&m=111558757202243&w=2
+#
+# Until that version is released you may have to apply the patch
+# yourself - yes, all 6 characters of it!
+#
+
+QUIET_SUBDIR0  = +$(MAKE) -C # space to separate -C and subdir
+QUIET_SUBDIR1  =
+
+ifneq ($(findstring $(MAKEFLAGS),w),w)
+PRINT_DIR = --no-print-directory
+else # "make -w"
+NO_SUBDIR = :
+endif
+
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+ifndef V
+	QUIET_ASCIIDOC	= @echo '   ' ASCIIDOC $@;
+	QUIET_XMLTO	= @echo '   ' XMLTO $@;
+	QUIET_DB2TEXI	= @echo '   ' DB2TEXI $@;
+	QUIET_MAKEINFO	= @echo '   ' MAKEINFO $@;
+	QUIET_DBLATEX	= @echo '   ' DBLATEX $@;
+	QUIET_XSLTPROC	= @echo '   ' XSLTPROC $@;
+	QUIET_GEN	= @echo '   ' GEN $@;
+	QUIET_STDERR	= 2> /dev/null
+	QUIET_SUBDIR0	= +@subdir=
+	QUIET_SUBDIR1	= ;$(NO_SUBDIR) echo '   ' SUBDIR $$subdir; \
+			  $(MAKE) $(PRINT_DIR) -C $$subdir
+	export V
+endif
+endif
+
+all: html man
+
+html: $(DOC_HTML)
+
+$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7): asciidoc.conf
+
+man: man1 man5 man7
+man1: $(DOC_MAN1)
+man5: $(DOC_MAN5)
+man7: $(DOC_MAN7)
+
+info: perf.info perfman.info
+
+pdf: user-manual.pdf
+
+install: install-man
+
+install-man: man
+	$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir)
+#	$(INSTALL) -d -m 755 $(DESTDIR)$(man5dir)
+#	$(INSTALL) -d -m 755 $(DESTDIR)$(man7dir)
+	$(INSTALL) -m 644 $(DOC_MAN1) $(DESTDIR)$(man1dir)
+#	$(INSTALL) -m 644 $(DOC_MAN5) $(DESTDIR)$(man5dir)
+#	$(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
+
+install-info: info
+	$(INSTALL) -d -m 755 $(DESTDIR)$(infodir)
+	$(INSTALL) -m 644 perf.info perfman.info $(DESTDIR)$(infodir)
+	if test -r $(DESTDIR)$(infodir)/dir; then \
+	  $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perf.info ;\
+	  $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perfman.info ;\
+	else \
+	  echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \
+	fi
+
+install-pdf: pdf
+	$(INSTALL) -d -m 755 $(DESTDIR)$(pdfdir)
+	$(INSTALL) -m 644 user-manual.pdf $(DESTDIR)$(pdfdir)
+
+install-html: html
+	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
+
+../PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
+	$(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) PERF-VERSION-FILE
+
+-include ../PERF-VERSION-FILE
+
+#
+# Determine "include::" file references in asciidoc files.
+#
+doc.dep : $(wildcard *.txt) build-docdep.perl
+	$(QUIET_GEN)$(RM) $@+ $@ && \
+	$(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \
+	mv $@+ $@
+
+-include doc.dep
+
+cmds_txt = cmds-ancillaryinterrogators.txt \
+	cmds-ancillarymanipulators.txt \
+	cmds-mainporcelain.txt \
+	cmds-plumbinginterrogators.txt \
+	cmds-plumbingmanipulators.txt \
+	cmds-synchingrepositories.txt \
+	cmds-synchelpers.txt \
+	cmds-purehelpers.txt \
+	cmds-foreignscminterface.txt
+
+$(cmds_txt): cmd-list.made
+
+cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT)
+	$(QUIET_GEN)$(RM) $@ && \
+	$(PERL_PATH) ./cmd-list.perl ../command-list.txt $(QUIET_STDERR) && \
+	date >$@
+
+clean:
+	$(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7
+	$(RM) *.texi *.texi+ *.texi++ perf.info perfman.info
+	$(RM) howto-index.txt howto/*.html doc.dep
+	$(RM) technical/api-*.html technical/api-index.txt
+	$(RM) $(cmds_txt) *.made
+
+$(MAN_HTML): %.html : %.txt
+	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+	$(ASCIIDOC) -b xhtml11 -d manpage -f asciidoc.conf \
+		$(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) -o $@+ $< && \
+	mv $@+ $@
+
+%.1 %.5 %.7 : %.xml
+	$(QUIET_XMLTO)$(RM) $@ && \
+	xmlto -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
+
+%.xml : %.txt
+	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+	$(ASCIIDOC) -b docbook -d manpage -f asciidoc.conf \
+		$(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) -o $@+ $< && \
+	mv $@+ $@
+
+XSLT = docbook.xsl
+XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css
+
+user-manual.html: user-manual.xml
+	$(QUIET_XSLTPROC)xsltproc $(XSLTOPTS) -o $@ $(XSLT) $<
+
+perf.info: user-manual.texi
+	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split -o $@ user-manual.texi
+
+user-manual.texi: user-manual.xml
+	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
+	$(DOCBOOK2X_TEXI) user-manual.xml --encoding=UTF-8 --to-stdout >$@++ && \
+	$(PERL_PATH) fix-texi.perl <$@++ >$@+ && \
+	rm $@++ && \
+	mv $@+ $@
+
+user-manual.pdf: user-manual.xml
+	$(QUIET_DBLATEX)$(RM) $@+ $@ && \
+	$(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< && \
+	mv $@+ $@
+
+perfman.texi: $(MAN_XML) cat-texi.perl
+	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
+	($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \
+		--to-stdout $(xml) &&) true) > $@++ && \
+	$(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \
+	rm $@++ && \
+	mv $@+ $@
+
+perfman.info: perfman.texi
+	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate $*.texi
+
+$(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml
+	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
+	$(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \
+	mv $@+ $@
+
+howto-index.txt: howto-index.sh $(wildcard howto/*.txt)
+	$(QUIET_GEN)$(RM) $@+ $@ && \
+	'$(SHELL_PATH_SQ)' ./howto-index.sh $(wildcard howto/*.txt) >$@+ && \
+	mv $@+ $@
+
+$(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 $*.txt
+
+WEBDOC_DEST = /pub/software/tools/perf/docs
+
+$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt
+	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+	sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ && \
+	mv $@+ $@
+
+install-webdoc : html
+	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST)
+
+quick-install: quick-install-man
+
+quick-install-man:
+	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir)
+
+quick-install-html:
+	'$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir)
+
+.PHONY: .FORCE-PERF-VERSION-FILE
diff --git a/tools/perf/Documentation/asciidoc.conf b/tools/perf/Documentation/asciidoc.conf
new file mode 100644
index 00000000000..356b23a4033
--- /dev/null
+++ b/tools/perf/Documentation/asciidoc.conf
@@ -0,0 +1,91 @@
+## linkperf: macro
+#
+# Usage: linkperf:command[manpage-section]
+#
+# Note, {0} is the manpage section, while {target} is the command.
+#
+# Show PERF link as: <command>(<section>); if section is defined, else just show
+# the command.
+
+[macros]
+(?su)[\\]?(?P<name>linkperf):(?P<target>\S*?)\[(?P<attrlist>.*?)\]=
+
+[attributes]
+asterisk=&#42;
+plus=&#43;
+caret=&#94;
+startsb=&#91;
+endsb=&#93;
+tilde=&#126;
+
+ifdef::backend-docbook[]
+[linkperf-inlinemacro]
+{0%{target}}
+{0#<citerefentry>}
+{0#<refentrytitle>{target}</refentrytitle><manvolnum>{0}</manvolnum>}
+{0#</citerefentry>}
+endif::backend-docbook[]
+
+ifdef::backend-docbook[]
+ifndef::perf-asciidoc-no-roff[]
+# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this.
+# v1.72 breaks with this because it replaces dots not in roff requests.
+[listingblock]
+<example><title>{title}</title>
+<literallayout>
+ifdef::doctype-manpage[]
+&#10;.ft C&#10;
+endif::doctype-manpage[]
+|
+ifdef::doctype-manpage[]
+&#10;.ft&#10;
+endif::doctype-manpage[]
+</literallayout>
+{title#}</example>
+endif::perf-asciidoc-no-roff[]
+
+ifdef::perf-asciidoc-no-roff[]
+ifdef::doctype-manpage[]
+# The following two small workarounds insert a simple paragraph after screen
+[listingblock]
+<example><title>{title}</title>
+<literallayout>
+|
+</literallayout><simpara></simpara>
+{title#}</example>
+
+[verseblock]
+<formalpara{id? id="{id}"}><title>{title}</title><para>
+{title%}<literallayout{id? id="{id}"}>
+{title#}<literallayout>
+|
+</literallayout>
+{title#}</para></formalpara>
+{title%}<simpara></simpara>
+endif::doctype-manpage[]
+endif::perf-asciidoc-no-roff[]
+endif::backend-docbook[]
+
+ifdef::doctype-manpage[]
+ifdef::backend-docbook[]
+[header]
+template::[header-declarations]
+<refentry>
+<refmeta>
+<refentrytitle>{mantitle}</refentrytitle>
+<manvolnum>{manvolnum}</manvolnum>
+<refmiscinfo class="source">perf</refmiscinfo>
+<refmiscinfo class="version">{perf_version}</refmiscinfo>
+<refmiscinfo class="manual">perf Manual</refmiscinfo>
+</refmeta>
+<refnamediv>
+  <refname>{manname}</refname>
+  <refpurpose>{manpurpose}</refpurpose>
+</refnamediv>
+endif::backend-docbook[]
+endif::doctype-manpage[]
+
+ifdef::backend-xhtml11[]
+[linkperf-inlinemacro]
+<a href="{target}.html">{target}{0?({0})}</a>
+endif::backend-xhtml11[]
diff --git a/tools/perf/Documentation/manpage-1.72.xsl b/tools/perf/Documentation/manpage-1.72.xsl
new file mode 100644
index 00000000000..b4d315cb8c4
--- /dev/null
+++ b/tools/perf/Documentation/manpage-1.72.xsl
@@ -0,0 +1,14 @@
+<!-- manpage-1.72.xsl:
+     special settings for manpages rendered from asciidoc+docbook
+     handles peculiarities in docbook-xsl 1.72.0 -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<xsl:import href="manpage-base.xsl"/>
+
+<!-- these are the special values for the roff control characters
+     needed for docbook-xsl 1.72.0 -->
+<xsl:param name="git.docbook.backslash">&#x2593;</xsl:param>
+<xsl:param name="git.docbook.dot"      >&#x2302;</xsl:param>
+
+</xsl:stylesheet>
diff --git a/tools/perf/Documentation/manpage-base.xsl b/tools/perf/Documentation/manpage-base.xsl
new file mode 100644
index 00000000000..a264fa61609
--- /dev/null
+++ b/tools/perf/Documentation/manpage-base.xsl
@@ -0,0 +1,35 @@
+<!-- manpage-base.xsl:
+     special formatting for manpages rendered from asciidoc+docbook -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<!-- these params silence some output from xmlto -->
+<xsl:param name="man.output.quietly" select="1"/>
+<xsl:param name="refentry.meta.get.quietly" select="1"/>
+
+<!-- convert asciidoc callouts to man page format;
+     git.docbook.backslash and git.docbook.dot params
+     must be supplied by another XSL file or other means -->
+<xsl:template match="co">
+	<xsl:value-of select="concat(
+			      $git.docbook.backslash,'fB(',
+			      substring-after(@id,'-'),')',
+			      $git.docbook.backslash,'fR')"/>
+</xsl:template>
+<xsl:template match="calloutlist">
+	<xsl:value-of select="$git.docbook.dot"/>
+	<xsl:text>sp&#10;</xsl:text>
+	<xsl:apply-templates/>
+	<xsl:text>&#10;</xsl:text>
+</xsl:template>
+<xsl:template match="callout">
+	<xsl:value-of select="concat(
+			      $git.docbook.backslash,'fB',
+			      substring-after(@arearefs,'-'),
+			      '. ',$git.docbook.backslash,'fR')"/>
+	<xsl:apply-templates/>
+	<xsl:value-of select="$git.docbook.dot"/>
+	<xsl:text>br&#10;</xsl:text>
+</xsl:template>
+
+</xsl:stylesheet>
diff --git a/tools/perf/Documentation/manpage-bold-literal.xsl b/tools/perf/Documentation/manpage-bold-literal.xsl
new file mode 100644
index 00000000000..608eb5df628
--- /dev/null
+++ b/tools/perf/Documentation/manpage-bold-literal.xsl
@@ -0,0 +1,17 @@
+<!-- manpage-bold-literal.xsl:
+     special formatting for manpages rendered from asciidoc+docbook -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<!-- render literal text as bold (instead of plain or monospace);
+     this makes literal text easier to distinguish in manpages
+     viewed on a tty -->
+<xsl:template match="literal">
+	<xsl:value-of select="$git.docbook.backslash"/>
+	<xsl:text>fB</xsl:text>
+	<xsl:apply-templates/>
+	<xsl:value-of select="$git.docbook.backslash"/>
+	<xsl:text>fR</xsl:text>
+</xsl:template>
+
+</xsl:stylesheet>
diff --git a/tools/perf/Documentation/manpage-normal.xsl b/tools/perf/Documentation/manpage-normal.xsl
new file mode 100644
index 00000000000..a48f5b11f3d
--- /dev/null
+++ b/tools/perf/Documentation/manpage-normal.xsl
@@ -0,0 +1,13 @@
+<!-- manpage-normal.xsl:
+     special settings for manpages rendered from asciidoc+docbook
+     handles anything we want to keep away from docbook-xsl 1.72.0 -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<xsl:import href="manpage-base.xsl"/>
+
+<!-- these are the normal values for the roff control characters -->
+<xsl:param name="git.docbook.backslash">\</xsl:param>
+<xsl:param name="git.docbook.dot"	>.</xsl:param>
+
+</xsl:stylesheet>
diff --git a/tools/perf/Documentation/manpage-suppress-sp.xsl b/tools/perf/Documentation/manpage-suppress-sp.xsl
new file mode 100644
index 00000000000..a63c7632a87
--- /dev/null
+++ b/tools/perf/Documentation/manpage-suppress-sp.xsl
@@ -0,0 +1,21 @@
+<!-- manpage-suppress-sp.xsl:
+     special settings for manpages rendered from asciidoc+docbook
+     handles erroneous, inline .sp in manpage output of some
+     versions of docbook-xsl -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<!-- attempt to work around spurious .sp at the tail of the line
+     that some versions of docbook stylesheets seem to add -->
+<xsl:template match="simpara">
+  <xsl:variable name="content">
+    <xsl:apply-templates/>
+  </xsl:variable>
+  <xsl:value-of select="normalize-space($content)"/>
+  <xsl:if test="not(ancestor::authorblurb) and
+                not(ancestor::personblurb)">
+    <xsl:text>&#10;&#10;</xsl:text>
+  </xsl:if>
+</xsl:template>
+
+</xsl:stylesheet>
diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt
new file mode 100644
index 00000000000..c9dcade0683
--- /dev/null
+++ b/tools/perf/Documentation/perf-annotate.txt
@@ -0,0 +1,29 @@
+perf-annotate(1)
+==============
+
+NAME
+----
+perf-annotate - Read perf.data (created by perf record) and display annotated code
+
+SYNOPSIS
+--------
+[verse]
+'perf annotate' [-i <file> | --input=file] symbol_name
+
+DESCRIPTION
+-----------
+This command reads the input file and displays an annotated version of the
+code. If the object file has debug symbols then the source code will be
+displayed alongside assembly code.
+
+If there is no debug info in the object, then annotated assembly is displayed.
+
+OPTIONS
+-------
+-i::
+--input=::
+        Input file name. (default: perf.data)
+
+SEE ALSO
+--------
+linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-help.txt b/tools/perf/Documentation/perf-help.txt
new file mode 100644
index 00000000000..514391818d1
--- /dev/null
+++ b/tools/perf/Documentation/perf-help.txt
@@ -0,0 +1,38 @@
+perf-help(1)
+============
+
+NAME
+----
+perf-help - display help information about perf
+
+SYNOPSIS
+--------
+'perf help' [-a|--all] [COMMAND]
+
+DESCRIPTION
+-----------
+
+With no options and no COMMAND given, the synopsis of the 'perf'
+command and a list of the most commonly used perf commands are printed
+on the standard output.
+
+If the option '--all' or '-a' is given, then all available commands are
+printed on the standard output.
+
+If a perf command is named, a manual page for that command is brought
+up. The 'man' program is used by default for this purpose, but this
+can be overridden by other options or configuration variables.
+
+Note that `perf --help ...` is identical to `perf help ...` because the
+former is internally converted into the latter.
+
+OPTIONS
+-------
+-a::
+--all::
+	Prints all the available commands on the standard output. This
+	option supersedes any other option.
+
+PERF
+----
+Part of the linkperf:perf[1] suite
diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt
new file mode 100644
index 00000000000..8290b942266
--- /dev/null
+++ b/tools/perf/Documentation/perf-list.txt
@@ -0,0 +1,25 @@
+perf-list(1)
+============
+
+NAME
+----
+perf-list - List all symbolic event types
+
+SYNOPSIS
+--------
+[verse]
+'perf list'
+
+DESCRIPTION
+-----------
+This command displays the symbolic event types which can be selected in the
+various perf commands with the -e option.
+
+OPTIONS
+-------
+None
+
+SEE ALSO
+--------
+linkperf:perf-stat[1], linkperf:perf-top[1],
+linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
new file mode 100644
index 00000000000..1dbc1eeb4c0
--- /dev/null
+++ b/tools/perf/Documentation/perf-record.txt
@@ -0,0 +1,42 @@
+perf-record(1)
+==============
+
+NAME
+----
+perf-record - Run a command and record its profile into perf.data
+
+SYNOPSIS
+--------
+[verse]
+'perf record' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
+'perf record' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>]
+
+DESCRIPTION
+-----------
+This command runs a command and gathers a performance counter profile
+from it, into perf.data - without displaying anything.
+
+This file can then be inspected later on, using 'perf report'.
+
+
+OPTIONS
+-------
+<command>...::
+	Any command you can specify in a shell.
+
+-e::
+--event=::
+	Select the PMU event. Selection can be a symbolic event name
+	(use 'perf list' to list all events) or a raw PMU
+	event (eventsel+umask) in the form of rNNN where NNN is a
+	 hexadecimal event descriptor.
+
+-a::
+        system-wide collection
+
+-l::
+        scale counter values
+
+SEE ALSO
+--------
+linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
new file mode 100644
index 00000000000..52d3fc6846a
--- /dev/null
+++ b/tools/perf/Documentation/perf-report.txt
@@ -0,0 +1,26 @@
+perf-report(1)
+==============
+
+NAME
+----
+perf-report - Read perf.data (created by perf record) and display the profile
+
+SYNOPSIS
+--------
+[verse]
+'perf report' [-i <file> | --input=file]
+
+DESCRIPTION
+-----------
+This command displays the performance counter profile information recorded
+via perf report.
+
+OPTIONS
+-------
+-i::
+--input=::
+        Input file name. (default: perf.data)
+
+SEE ALSO
+--------
+linkperf:perf-stat[1]
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
new file mode 100644
index 00000000000..c368a72721d
--- /dev/null
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -0,0 +1,66 @@
+perf-stat(1)
+============
+
+NAME
+----
+perf-stat - Run a command and gather performance counter statistics
+
+SYNOPSIS
+--------
+[verse]
+'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>]
+
+DESCRIPTION
+-----------
+This command runs a command and gathers performance counter statistics
+from it.
+
+
+OPTIONS
+-------
+<command>...::
+	Any command you can specify in a shell.
+
+
+-e::
+--event=::
+	Select the PMU event. Selection can be a symbolic event name
+	(use 'perf list' to list all events) or a raw PMU
+	event (eventsel+umask) in the form of rNNN where NNN is a
+	 hexadecimal event descriptor.
+
+-i::
+--inherit::
+        child tasks inherit counters
+-p::
+--pid=<pid>::
+        stat events on existing pid
+
+-a::
+        system-wide collection
+
+-l::
+        scale counter values
+
+EXAMPLES
+--------
+
+$ perf stat -- make -j
+
+ Performance counter stats for 'make -j':
+
+    8117.370256  task clock ticks     #      11.281 CPU utilization factor
+            678  context switches     #       0.000 M/sec
+            133  CPU migrations       #       0.000 M/sec
+         235724  pagefaults           #       0.029 M/sec
+    24821162526  CPU cycles           #    3057.784 M/sec
+    18687303457  instructions         #    2302.138 M/sec
+      172158895  cache references     #      21.209 M/sec
+       27075259  cache misses         #       3.335 M/sec
+
+ Wall-clock time elapsed:   719.554352 msecs
+
+SEE ALSO
+--------
+linkperf:perf-top[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
new file mode 100644
index 00000000000..539d0128972
--- /dev/null
+++ b/tools/perf/Documentation/perf-top.txt
@@ -0,0 +1,39 @@
+perf-top(1)
+===========
+
+NAME
+----
+perf-top - Run a command and profile it
+
+SYNOPSIS
+--------
+[verse]
+'perf top' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
+
+DESCRIPTION
+-----------
+This command runs a command and gathers a performance counter profile
+from it.
+
+
+OPTIONS
+-------
+<command>...::
+	Any command you can specify in a shell.
+
+-e::
+--event=::
+	Select the PMU event. Selection can be a symbolic event name
+	(use 'perf list' to list all events) or a raw PMU
+	event (eventsel+umask) in the form of rNNN where NNN is a
+	 hexadecimal event descriptor.
+
+-a::
+        system-wide collection
+
+-l::
+        scale counter values
+
+SEE ALSO
+--------
+linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf.txt b/tools/perf/Documentation/perf.txt
new file mode 100644
index 00000000000..69c83255719
--- /dev/null
+++ b/tools/perf/Documentation/perf.txt
@@ -0,0 +1,24 @@
+perf(1)
+=======
+
+NAME
+----
+perf - Performance analysis tools for Linux
+
+SYNOPSIS
+--------
+[verse]
+'perf' [--version] [--help] COMMAND [ARGS]
+
+DESCRIPTION
+-----------
+Performance counters for Linux are are a new kernel-based subsystem
+that provide a framework for all things performance analysis. It
+covers hardware level (CPU/PMU, Performance Monitoring Unit) features
+and software features (software counters, tracepoints) as well.
+
+SEE ALSO
+--------
+linkperf:perf-stat[1], linkperf:perf-top[1],
+linkperf:perf-record[1], linkperf:perf-report[1],
+linkperf:perf-list[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
new file mode 100644
index 00000000000..0cbd5d6874e
--- /dev/null
+++ b/tools/perf/Makefile
@@ -0,0 +1,929 @@
+# The default target of this Makefile is...
+all::
+
+# Define V=1 to have a more verbose compile.
+#
+# Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
+# or vsnprintf() return -1 instead of number of characters which would
+# have been written to the final string if enough space had been available.
+#
+# Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
+# when attempting to read from an fopen'ed directory.
+#
+# Define NO_OPENSSL environment variable if you do not have OpenSSL.
+# This also implies MOZILLA_SHA1.
+#
+# Define CURLDIR=/foo/bar if your curl header and library files are in
+# /foo/bar/include and /foo/bar/lib directories.
+#
+# Define EXPATDIR=/foo/bar if your expat header and library files are in
+# /foo/bar/include and /foo/bar/lib directories.
+#
+# Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
+#
+# Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
+# d_type in struct dirent (latest Cygwin -- will be fixed soonish).
+#
+# Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.)
+# do not support the 'size specifiers' introduced by C99, namely ll, hh,
+# j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t).
+# some C compilers supported these specifiers prior to C99 as an extension.
+#
+# Define NO_STRCASESTR if you don't have strcasestr.
+#
+# Define NO_MEMMEM if you don't have memmem.
+#
+# Define NO_STRTOUMAX if you don't have strtoumax in the C library.
+# If your compiler also does not support long long or does not have
+# strtoull, define NO_STRTOULL.
+#
+# Define NO_SETENV if you don't have setenv in the C library.
+#
+# Define NO_UNSETENV if you don't have unsetenv in the C library.
+#
+# Define NO_MKDTEMP if you don't have mkdtemp in the C library.
+#
+# Define NO_SYS_SELECT_H if you don't have sys/select.h.
+#
+# Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link.
+# Enable it on Windows.  By default, symrefs are still used.
+#
+# Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
+# tests.  These tests take up a significant amount of the total test time
+# but are not needed unless you plan to talk to SVN repos.
+#
+# Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
+# installed in /sw, but don't want PERF to link against any libraries
+# installed there.  If defined you may specify your own (or Fink's)
+# include directories and library directories by defining CFLAGS
+# and LDFLAGS appropriately.
+#
+# Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
+# have DarwinPorts installed in /opt/local, but don't want PERF to
+# link against any libraries installed there.  If defined you may
+# specify your own (or DarwinPort's) include directories and
+# library directories by defining CFLAGS and LDFLAGS appropriately.
+#
+# Define PPC_SHA1 environment variable when running make to make use of
+# a bundled SHA1 routine optimized for PowerPC.
+#
+# Define ARM_SHA1 environment variable when running make to make use of
+# a bundled SHA1 routine optimized for ARM.
+#
+# Define MOZILLA_SHA1 environment variable when running make to make use of
+# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
+# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
+# choice) has very fast version optimized for i586.
+#
+# Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
+#
+# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
+#
+# Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
+# Patrick Mauritz).
+#
+# Define NO_MMAP if you want to avoid mmap.
+#
+# Define NO_PTHREADS if you do not have or do not want to use Pthreads.
+#
+# Define NO_PREAD if you have a problem with pread() system call (e.g.
+# cygwin.dll before v1.5.22).
+#
+# Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
+# generally faster on your platform than accessing the working directory.
+#
+# Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
+# the executable mode bit, but doesn't really do so.
+#
+# Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
+#
+# Define NO_SOCKADDR_STORAGE if your platform does not have struct
+# sockaddr_storage.
+#
+# Define NO_ICONV if your libc does not properly support iconv.
+#
+# Define OLD_ICONV if your library has an old iconv(), where the second
+# (input buffer pointer) parameter is declared with type (const char **).
+#
+# Define NO_DEFLATE_BOUND if your zlib does not have deflateBound.
+#
+# Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib"
+# that tells runtime paths to dynamic libraries;
+# "-Wl,-rpath=/path/lib" is used instead.
+#
+# Define USE_NSEC below if you want perf to care about sub-second file mtimes
+# and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
+# it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
+# randomly break unless your underlying filesystem supports those sub-second
+# times (my ext3 doesn't).
+#
+# Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of
+# "st_ctim"
+#
+# Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec"
+# available.  This automatically turns USE_NSEC off.
+#
+# Define USE_STDEV below if you want perf to care about the underlying device
+# change being considered an inode change from the update-index perspective.
+#
+# Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
+# field that counts the on-disk footprint in 512-byte blocks.
+#
+# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
+#
+# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
+#
+# Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
+# MakeMaker (e.g. using ActiveState under Cygwin).
+#
+# Define NO_PERL if you do not want Perl scripts or libraries at all.
+#
+# Define INTERNAL_QSORT to use Git's implementation of qsort(), which
+# is a simplified version of the merge sort used in glibc. This is
+# recommended if Git triggers O(n^2) behavior in your platform's qsort().
+#
+# Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call
+# your external grep (e.g., if your system lacks grep, if its grep is
+# broken, or spawning external process is slower than built-in grep perf has).
+
+PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
+	@$(SHELL_PATH) util/PERF-VERSION-GEN
+-include PERF-VERSION-FILE
+
+uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
+uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
+uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
+uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
+uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
+uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
+
+# CFLAGS and LDFLAGS are for the users to override from the command line.
+
+CFLAGS = -ggdb3 -Wall -Werror -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -O6
+LDFLAGS = -lpthread -lrt -lelf
+ALL_CFLAGS = $(CFLAGS)
+ALL_LDFLAGS = $(LDFLAGS)
+STRIP ?= strip
+
+# Among the variables below, these:
+#   perfexecdir
+#   template_dir
+#   mandir
+#   infodir
+#   htmldir
+#   ETC_PERFCONFIG (but not sysconfdir)
+# can be specified as a relative path some/where/else;
+# this is interpreted as relative to $(prefix) and "perf" at
+# runtime figures out where they are based on the path to the executable.
+# This can help installing the suite in a relocatable way.
+
+prefix = $(HOME)
+bindir_relative = bin
+bindir = $(prefix)/$(bindir_relative)
+mandir = share/man
+infodir = share/info
+perfexecdir = libexec/perf-core
+sharedir = $(prefix)/share
+template_dir = share/perf-core/templates
+htmldir = share/doc/perf-doc
+ifeq ($(prefix),/usr)
+sysconfdir = /etc
+ETC_PERFCONFIG = $(sysconfdir)/perfconfig
+else
+sysconfdir = $(prefix)/etc
+ETC_PERFCONFIG = etc/perfconfig
+endif
+lib = lib
+# DESTDIR=
+
+export prefix bindir sharedir sysconfdir
+
+CC = gcc
+AR = ar
+RM = rm -f
+TAR = tar
+FIND = find
+INSTALL = install
+RPMBUILD = rpmbuild
+PTHREAD_LIBS = -lpthread
+
+# sparse is architecture-neutral, which means that we need to tell it
+# explicitly what architecture to check for. Fix this up for yours..
+SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
+
+
+
+### --- END CONFIGURATION SECTION ---
+
+# Those must not be GNU-specific; they are shared with perl/ which may
+# be built by a different compiler. (Note that this is an artifact now
+# but it still might be nice to keep that distinction.)
+BASIC_CFLAGS =
+BASIC_LDFLAGS =
+
+# Guard against environment variables
+BUILTIN_OBJS =
+BUILT_INS =
+COMPAT_CFLAGS =
+COMPAT_OBJS =
+LIB_H =
+LIB_OBJS =
+SCRIPT_PERL =
+SCRIPT_SH =
+TEST_PROGRAMS =
+
+#
+# No scripts right now:
+#
+
+# SCRIPT_SH += perf-am.sh
+
+#
+# No Perl scripts right now:
+#
+
+# SCRIPT_PERL += perf-add--interactive.perl
+
+SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
+	  $(patsubst %.perl,%,$(SCRIPT_PERL))
+
+# Empty...
+EXTRA_PROGRAMS =
+
+# ... and all the rest that could be moved out of bindir to perfexecdir
+PROGRAMS += $(EXTRA_PROGRAMS)
+
+#
+# Single 'perf' binary right now:
+#
+PROGRAMS += perf
+
+# List built-in command $C whose implementation cmd_$C() is not in
+# builtin-$C.o but is linked in as part of some other command.
+#
+# None right now:
+#
+# BUILT_INS += perf-init $X
+
+# what 'all' will build and 'install' will install, in perfexecdir
+ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
+
+# what 'all' will build but not install in perfexecdir
+OTHER_PROGRAMS = perf$X
+
+# Set paths to tools early so that they can be used for version tests.
+ifndef SHELL_PATH
+	SHELL_PATH = /bin/sh
+endif
+ifndef PERL_PATH
+	PERL_PATH = /usr/bin/perl
+endif
+
+export PERL_PATH
+
+LIB_FILE=libperf.a
+
+LIB_H += ../../include/linux/perf_counter.h
+LIB_H += perf.h
+LIB_H += util/list.h
+LIB_H += util/rbtree.h
+LIB_H += util/levenshtein.h
+LIB_H += util/parse-options.h
+LIB_H += util/parse-events.h
+LIB_H += util/quote.h
+LIB_H += util/util.h
+LIB_H += util/help.h
+LIB_H += util/strbuf.h
+LIB_H += util/string.h
+LIB_H += util/run-command.h
+LIB_H += util/sigchain.h
+LIB_H += util/symbol.h
+LIB_H += util/color.h
+
+LIB_OBJS += util/abspath.o
+LIB_OBJS += util/alias.o
+LIB_OBJS += util/config.o
+LIB_OBJS += util/ctype.o
+LIB_OBJS += util/environment.o
+LIB_OBJS += util/exec_cmd.o
+LIB_OBJS += util/help.o
+LIB_OBJS += util/levenshtein.o
+LIB_OBJS += util/parse-options.o
+LIB_OBJS += util/parse-events.o
+LIB_OBJS += util/path.o
+LIB_OBJS += util/rbtree.o
+LIB_OBJS += util/run-command.o
+LIB_OBJS += util/quote.o
+LIB_OBJS += util/strbuf.o
+LIB_OBJS += util/string.o
+LIB_OBJS += util/usage.o
+LIB_OBJS += util/wrapper.o
+LIB_OBJS += util/sigchain.o
+LIB_OBJS += util/symbol.o
+LIB_OBJS += util/color.o
+LIB_OBJS += util/pager.o
+
+BUILTIN_OBJS += builtin-annotate.o
+BUILTIN_OBJS += builtin-help.o
+BUILTIN_OBJS += builtin-list.o
+BUILTIN_OBJS += builtin-record.o
+BUILTIN_OBJS += builtin-report.o
+BUILTIN_OBJS += builtin-stat.o
+BUILTIN_OBJS += builtin-top.o
+
+PERFLIBS = $(LIB_FILE)
+EXTLIBS =
+
+#
+# Platform specific tweaks
+#
+
+# We choose to avoid "if .. else if .. else .. endif endif"
+# because maintaining the nesting to match is a pain.  If
+# we had "elif" things would have been much nicer...
+
+-include config.mak.autogen
+-include config.mak
+
+ifeq ($(uname_S),Darwin)
+	ifndef NO_FINK
+		ifeq ($(shell test -d /sw/lib && echo y),y)
+			BASIC_CFLAGS += -I/sw/include
+			BASIC_LDFLAGS += -L/sw/lib
+		endif
+	endif
+	ifndef NO_DARWIN_PORTS
+		ifeq ($(shell test -d /opt/local/lib && echo y),y)
+			BASIC_CFLAGS += -I/opt/local/include
+			BASIC_LDFLAGS += -L/opt/local/lib
+		endif
+	endif
+	PTHREAD_LIBS =
+endif
+
+ifndef CC_LD_DYNPATH
+	ifdef NO_R_TO_GCC_LINKER
+		# Some gcc does not accept and pass -R to the linker to specify
+		# the runtime dynamic library path.
+		CC_LD_DYNPATH = -Wl,-rpath,
+	else
+		CC_LD_DYNPATH = -R
+	endif
+endif
+
+ifdef ZLIB_PATH
+	BASIC_CFLAGS += -I$(ZLIB_PATH)/include
+	EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib)
+endif
+EXTLIBS += -lz
+
+ifdef NEEDS_SOCKET
+	EXTLIBS += -lsocket
+endif
+ifdef NEEDS_NSL
+	EXTLIBS += -lnsl
+endif
+ifdef NO_D_TYPE_IN_DIRENT
+	BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
+endif
+ifdef NO_D_INO_IN_DIRENT
+	BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
+endif
+ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
+	BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT
+endif
+ifdef USE_NSEC
+	BASIC_CFLAGS += -DUSE_NSEC
+endif
+ifdef USE_ST_TIMESPEC
+	BASIC_CFLAGS += -DUSE_ST_TIMESPEC
+endif
+ifdef NO_NSEC
+	BASIC_CFLAGS += -DNO_NSEC
+endif
+ifdef NO_C99_FORMAT
+	BASIC_CFLAGS += -DNO_C99_FORMAT
+endif
+ifdef SNPRINTF_RETURNS_BOGUS
+	COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS
+	COMPAT_OBJS += compat/snprintf.o
+endif
+ifdef FREAD_READS_DIRECTORIES
+	COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES
+	COMPAT_OBJS += compat/fopen.o
+endif
+ifdef NO_SYMLINK_HEAD
+	BASIC_CFLAGS += -DNO_SYMLINK_HEAD
+endif
+ifdef NO_STRCASESTR
+	COMPAT_CFLAGS += -DNO_STRCASESTR
+	COMPAT_OBJS += compat/strcasestr.o
+endif
+ifdef NO_STRTOUMAX
+	COMPAT_CFLAGS += -DNO_STRTOUMAX
+	COMPAT_OBJS += compat/strtoumax.o
+endif
+ifdef NO_STRTOULL
+	COMPAT_CFLAGS += -DNO_STRTOULL
+endif
+ifdef NO_SETENV
+	COMPAT_CFLAGS += -DNO_SETENV
+	COMPAT_OBJS += compat/setenv.o
+endif
+ifdef NO_MKDTEMP
+	COMPAT_CFLAGS += -DNO_MKDTEMP
+	COMPAT_OBJS += compat/mkdtemp.o
+endif
+ifdef NO_UNSETENV
+	COMPAT_CFLAGS += -DNO_UNSETENV
+	COMPAT_OBJS += compat/unsetenv.o
+endif
+ifdef NO_SYS_SELECT_H
+	BASIC_CFLAGS += -DNO_SYS_SELECT_H
+endif
+ifdef NO_MMAP
+	COMPAT_CFLAGS += -DNO_MMAP
+	COMPAT_OBJS += compat/mmap.o
+else
+	ifdef USE_WIN32_MMAP
+		COMPAT_CFLAGS += -DUSE_WIN32_MMAP
+		COMPAT_OBJS += compat/win32mmap.o
+	endif
+endif
+ifdef NO_PREAD
+	COMPAT_CFLAGS += -DNO_PREAD
+	COMPAT_OBJS += compat/pread.o
+endif
+ifdef NO_FAST_WORKING_DIRECTORY
+	BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
+endif
+ifdef NO_TRUSTABLE_FILEMODE
+	BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
+endif
+ifdef NO_IPV6
+	BASIC_CFLAGS += -DNO_IPV6
+endif
+ifdef NO_UINTMAX_T
+	BASIC_CFLAGS += -Duintmax_t=uint32_t
+endif
+ifdef NO_SOCKADDR_STORAGE
+ifdef NO_IPV6
+	BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
+else
+	BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
+endif
+endif
+ifdef NO_INET_NTOP
+	LIB_OBJS += compat/inet_ntop.o
+endif
+ifdef NO_INET_PTON
+	LIB_OBJS += compat/inet_pton.o
+endif
+
+ifdef NO_ICONV
+	BASIC_CFLAGS += -DNO_ICONV
+endif
+
+ifdef OLD_ICONV
+	BASIC_CFLAGS += -DOLD_ICONV
+endif
+
+ifdef NO_DEFLATE_BOUND
+	BASIC_CFLAGS += -DNO_DEFLATE_BOUND
+endif
+
+ifdef PPC_SHA1
+	SHA1_HEADER = "ppc/sha1.h"
+	LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
+else
+ifdef ARM_SHA1
+	SHA1_HEADER = "arm/sha1.h"
+	LIB_OBJS += arm/sha1.o arm/sha1_arm.o
+else
+ifdef MOZILLA_SHA1
+	SHA1_HEADER = "mozilla-sha1/sha1.h"
+	LIB_OBJS += mozilla-sha1/sha1.o
+else
+	SHA1_HEADER = <openssl/sha.h>
+	EXTLIBS += $(LIB_4_CRYPTO)
+endif
+endif
+endif
+ifdef NO_PERL_MAKEMAKER
+	export NO_PERL_MAKEMAKER
+endif
+ifdef NO_HSTRERROR
+	COMPAT_CFLAGS += -DNO_HSTRERROR
+	COMPAT_OBJS += compat/hstrerror.o
+endif
+ifdef NO_MEMMEM
+	COMPAT_CFLAGS += -DNO_MEMMEM
+	COMPAT_OBJS += compat/memmem.o
+endif
+ifdef INTERNAL_QSORT
+	COMPAT_CFLAGS += -DINTERNAL_QSORT
+	COMPAT_OBJS += compat/qsort.o
+endif
+ifdef RUNTIME_PREFIX
+	COMPAT_CFLAGS += -DRUNTIME_PREFIX
+endif
+
+ifdef DIR_HAS_BSD_GROUP_SEMANTICS
+	COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
+endif
+ifdef NO_EXTERNAL_GREP
+	BASIC_CFLAGS += -DNO_EXTERNAL_GREP
+endif
+
+ifeq ($(PERL_PATH),)
+NO_PERL=NoThanks
+endif
+
+QUIET_SUBDIR0  = +$(MAKE) -C # space to separate -C and subdir
+QUIET_SUBDIR1  =
+
+ifneq ($(findstring $(MAKEFLAGS),w),w)
+PRINT_DIR = --no-print-directory
+else # "make -w"
+NO_SUBDIR = :
+endif
+
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+ifndef V
+	QUIET_CC       = @echo '   ' CC $@;
+	QUIET_AR       = @echo '   ' AR $@;
+	QUIET_LINK     = @echo '   ' LINK $@;
+	QUIET_BUILT_IN = @echo '   ' BUILTIN $@;
+	QUIET_GEN      = @echo '   ' GEN $@;
+	QUIET_SUBDIR0  = +@subdir=
+	QUIET_SUBDIR1  = ;$(NO_SUBDIR) echo '   ' SUBDIR $$subdir; \
+			 $(MAKE) $(PRINT_DIR) -C $$subdir
+	export V
+	export QUIET_GEN
+	export QUIET_BUILT_IN
+endif
+endif
+
+ifdef ASCIIDOC8
+	export ASCIIDOC8
+endif
+
+# Shell quote (do not use $(call) to accommodate ancient setups);
+
+SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
+ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
+
+DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
+bindir_SQ = $(subst ','\'',$(bindir))
+bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
+mandir_SQ = $(subst ','\'',$(mandir))
+infodir_SQ = $(subst ','\'',$(infodir))
+perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
+template_dir_SQ = $(subst ','\'',$(template_dir))
+htmldir_SQ = $(subst ','\'',$(htmldir))
+prefix_SQ = $(subst ','\'',$(prefix))
+
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
+PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
+
+LIBS = $(PERFLIBS) $(EXTLIBS)
+
+BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
+	$(COMPAT_CFLAGS)
+LIB_OBJS += $(COMPAT_OBJS)
+
+ALL_CFLAGS += $(BASIC_CFLAGS)
+ALL_LDFLAGS += $(BASIC_LDFLAGS)
+
+export TAR INSTALL DESTDIR SHELL_PATH
+
+
+### Build rules
+
+SHELL = $(SHELL_PATH)
+
+all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
+ifneq (,$X)
+	$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
+endif
+
+all::
+
+please_set_SHELL_PATH_to_a_more_modern_shell:
+	@$$(:)
+
+shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
+
+strip: $(PROGRAMS) perf$X
+	$(STRIP) $(STRIP_OPTS) $(PROGRAMS) perf$X
+
+perf.o: perf.c common-cmds.h PERF-CFLAGS
+	$(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \
+		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
+		$(ALL_CFLAGS) -c $(filter %.c,$^)
+
+perf$X: perf.o $(BUILTIN_OBJS) $(PERFLIBS)
+	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ perf.o \
+		$(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
+
+builtin-help.o: builtin-help.c common-cmds.h PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \
+		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
+		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
+		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
+
+$(BUILT_INS): perf$X
+	$(QUIET_BUILT_IN)$(RM) $@ && \
+	ln perf$X $@ 2>/dev/null || \
+	ln -s perf$X $@ 2>/dev/null || \
+	cp perf$X $@
+
+common-cmds.h: util/generate-cmdlist.sh command-list.txt
+
+common-cmds.h: $(wildcard Documentation/perf-*.txt)
+	$(QUIET_GEN)util/generate-cmdlist.sh > $@+ && mv $@+ $@
+
+$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
+	$(QUIET_GEN)$(RM) $@ $@+ && \
+	sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
+	    -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
+	    -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
+	    -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
+	    -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
+	    $@.sh >$@+ && \
+	chmod +x $@+ && \
+	mv $@+ $@
+
+configure: configure.ac
+	$(QUIET_GEN)$(RM) $@ $<+ && \
+	sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
+	    $< > $<+ && \
+	autoconf -o $@ $<+ && \
+	$(RM) $<+
+
+# These can record PERF_VERSION
+perf.o perf.spec \
+	$(patsubst %.sh,%,$(SCRIPT_SH)) \
+	$(patsubst %.perl,%,$(SCRIPT_PERL)) \
+	: PERF-VERSION-FILE
+
+%.o: %.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $<
+%.s: %.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $<
+%.o: %.S
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) $<
+
+util/exec_cmd.o: util/exec_cmd.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \
+		'-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
+		'-DBINDIR="$(bindir_relative_SQ)"' \
+		'-DPREFIX="$(prefix_SQ)"' \
+		$<
+
+builtin-init-db.o: builtin-init-db.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $<
+
+util/config.o: util/config.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
+perf-%$X: %.o $(PERFLIBS)
+	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
+
+$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
+$(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
+builtin-revert.o wt-status.o: wt-status.h
+
+$(LIB_FILE): $(LIB_OBJS)
+	$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
+
+doc:
+	$(MAKE) -C Documentation all
+
+man:
+	$(MAKE) -C Documentation man
+
+html:
+	$(MAKE) -C Documentation html
+
+info:
+	$(MAKE) -C Documentation info
+
+pdf:
+	$(MAKE) -C Documentation pdf
+
+TAGS:
+	$(RM) TAGS
+	$(FIND) . -name '*.[hcS]' -print | xargs etags -a
+
+tags:
+	$(RM) tags
+	$(FIND) . -name '*.[hcS]' -print | xargs ctags -a
+
+cscope:
+	$(RM) cscope*
+	$(FIND) . -name '*.[hcS]' -print | xargs cscope -b
+
+### Detect prefix changes
+TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
+             $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
+
+PERF-CFLAGS: .FORCE-PERF-CFLAGS
+	@FLAGS='$(TRACK_CFLAGS)'; \
+	    if test x"$$FLAGS" != x"`cat PERF-CFLAGS 2>/dev/null`" ; then \
+		echo 1>&2 "    * new build flags or prefix"; \
+		echo "$$FLAGS" >PERF-CFLAGS; \
+            fi
+
+# We need to apply sq twice, once to protect from the shell
+# that runs PERF-BUILD-OPTIONS, and then again to protect it
+# and the first level quoting from the shell that runs "echo".
+PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS
+	@echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
+	@echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
+	@echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
+	@echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
+
+### Testing rules
+
+#
+# None right now:
+#
+# TEST_PROGRAMS += test-something$X
+
+all:: $(TEST_PROGRAMS)
+
+# GNU make supports exporting all variables by "export" without parameters.
+# However, the environment gets quite big, and some programs have problems
+# with that.
+
+export NO_SVN_TESTS
+
+check: common-cmds.h
+	if sparse; \
+	then \
+		for i in *.c */*.c; \
+		do \
+			sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
+		done; \
+	else \
+		echo 2>&1 "Did you mean 'make test'?"; \
+		exit 1; \
+	fi
+
+remove-dashes:
+	./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS)
+
+### Installation rules
+
+ifneq ($(filter /%,$(firstword $(template_dir))),)
+template_instdir = $(template_dir)
+else
+template_instdir = $(prefix)/$(template_dir)
+endif
+export template_instdir
+
+ifneq ($(filter /%,$(firstword $(perfexecdir))),)
+perfexec_instdir = $(perfexecdir)
+else
+perfexec_instdir = $(prefix)/$(perfexecdir)
+endif
+perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
+export perfexec_instdir
+
+install: all
+	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
+	$(INSTALL) perf$X '$(DESTDIR_SQ)$(bindir_SQ)'
+ifdef BUILT_INS
+	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
+	$(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
+ifneq (,$X)
+	$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';)
+endif
+endif
+
+install-doc:
+	$(MAKE) -C Documentation install
+
+install-man:
+	$(MAKE) -C Documentation install-man
+
+install-html:
+	$(MAKE) -C Documentation install-html
+
+install-info:
+	$(MAKE) -C Documentation install-info
+
+install-pdf:
+	$(MAKE) -C Documentation install-pdf
+
+quick-install-doc:
+	$(MAKE) -C Documentation quick-install
+
+quick-install-man:
+	$(MAKE) -C Documentation quick-install-man
+
+quick-install-html:
+	$(MAKE) -C Documentation quick-install-html
+
+
+### Maintainer's dist rules
+#
+# None right now
+#
+#
+# perf.spec: perf.spec.in
+#	sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+
+#	mv $@+ $@
+#
+# PERF_TARNAME=perf-$(PERF_VERSION)
+# dist: perf.spec perf-archive$(X) configure
+#	./perf-archive --format=tar \
+#		--prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar
+#	@mkdir -p $(PERF_TARNAME)
+#	@cp perf.spec configure $(PERF_TARNAME)
+#	@echo $(PERF_VERSION) > $(PERF_TARNAME)/version
+#	$(TAR) rf $(PERF_TARNAME).tar \
+#		$(PERF_TARNAME)/perf.spec \
+#		$(PERF_TARNAME)/configure \
+#		$(PERF_TARNAME)/version
+#	@$(RM) -r $(PERF_TARNAME)
+#	gzip -f -9 $(PERF_TARNAME).tar
+#
+# htmldocs = perf-htmldocs-$(PERF_VERSION)
+# manpages = perf-manpages-$(PERF_VERSION)
+# dist-doc:
+#	$(RM) -r .doc-tmp-dir
+#	mkdir .doc-tmp-dir
+#	$(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
+#	cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
+#	gzip -n -9 -f $(htmldocs).tar
+#	:
+#	$(RM) -r .doc-tmp-dir
+#	mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7
+#	$(MAKE) -C Documentation DESTDIR=./ \
+#		man1dir=../.doc-tmp-dir/man1 \
+#		man5dir=../.doc-tmp-dir/man5 \
+#		man7dir=../.doc-tmp-dir/man7 \
+#		install
+#	cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
+#	gzip -n -9 -f $(manpages).tar
+#	$(RM) -r .doc-tmp-dir
+#
+# rpm: dist
+#	$(RPMBUILD) -ta $(PERF_TARNAME).tar.gz
+
+### Cleaning rules
+
+distclean: clean
+#	$(RM) configure
+
+clean:
+	$(RM) *.o */*.o $(LIB_FILE)
+	$(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X
+	$(RM) $(TEST_PROGRAMS)
+	$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
+	$(RM) -r autom4te.cache
+	$(RM) config.log config.mak.autogen config.mak.append config.status config.cache
+	$(RM) -r $(PERF_TARNAME) .doc-tmp-dir
+	$(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz
+	$(RM) $(htmldocs).tar.gz $(manpages).tar.gz
+	$(MAKE) -C Documentation/ clean
+	$(RM) PERF-VERSION-FILE PERF-CFLAGS PERF-BUILD-OPTIONS
+
+.PHONY: all install clean strip
+.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
+.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
+.PHONY: .FORCE-PERF-BUILD-OPTIONS
+
+### Make sure built-ins do not have dups and listed in perf.c
+#
+check-builtins::
+	./check-builtins.sh
+
+### Test suite coverage testing
+#
+# None right now
+#
+# .PHONY: coverage coverage-clean coverage-build coverage-report
+#
+# coverage:
+#	$(MAKE) coverage-build
+#	$(MAKE) coverage-report
+#
+# coverage-clean:
+#	rm -f *.gcda *.gcno
+#
+# COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs
+# COVERAGE_LDFLAGS = $(CFLAGS)  -O0 -lgcov
+#
+# coverage-build: coverage-clean
+#	$(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all
+#	$(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \
+#		-j1 test
+#
+# coverage-report:
+#	gcov -b *.c */*.c
+#	grep '^function.*called 0 ' *.c.gcov */*.c.gcov \
+#		| sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \
+#		| tee coverage-untested-functions
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
new file mode 100644
index 00000000000..b1ed5f766cb
--- /dev/null
+++ b/tools/perf/builtin-annotate.c
@@ -0,0 +1,1356 @@
+/*
+ * builtin-annotate.c
+ *
+ * Builtin annotate command: Analyze the perf.data input file,
+ * look up and read DSOs and symbol information and display
+ * a histogram of results, along various sorting keys.
+ */
+#include "builtin.h"
+
+#include "util/util.h"
+
+#include "util/color.h"
+#include "util/list.h"
+#include "util/cache.h"
+#include "util/rbtree.h"
+#include "util/symbol.h"
+#include "util/string.h"
+
+#include "perf.h"
+
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+
+#define SHOW_KERNEL	1
+#define SHOW_USER	2
+#define SHOW_HV		4
+
+static char		const *input_name = "perf.data";
+static char		*vmlinux = "vmlinux";
+
+static char		default_sort_order[] = "comm,symbol";
+static char		*sort_order = default_sort_order;
+
+static int		input;
+static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
+
+static int		dump_trace = 0;
+#define dprintf(x...)	do { if (dump_trace) printf(x); } while (0)
+
+static int		verbose;
+
+static unsigned long	page_size;
+static unsigned long	mmap_window = 32;
+
+struct ip_event {
+	struct perf_event_header header;
+	__u64 ip;
+	__u32 pid, tid;
+};
+
+struct mmap_event {
+	struct perf_event_header header;
+	__u32 pid, tid;
+	__u64 start;
+	__u64 len;
+	__u64 pgoff;
+	char filename[PATH_MAX];
+};
+
+struct comm_event {
+	struct perf_event_header header;
+	__u32 pid, tid;
+	char comm[16];
+};
+
+struct fork_event {
+	struct perf_event_header header;
+	__u32 pid, ppid;
+};
+
+struct period_event {
+	struct perf_event_header header;
+	__u64 time;
+	__u64 id;
+	__u64 sample_period;
+};
+
+typedef union event_union {
+	struct perf_event_header	header;
+	struct ip_event			ip;
+	struct mmap_event		mmap;
+	struct comm_event		comm;
+	struct fork_event		fork;
+	struct period_event		period;
+} event_t;
+
+static LIST_HEAD(dsos);
+static struct dso *kernel_dso;
+static struct dso *vdso;
+
+
+static void dsos__add(struct dso *dso)
+{
+	list_add_tail(&dso->node, &dsos);
+}
+
+static struct dso *dsos__find(const char *name)
+{
+	struct dso *pos;
+
+	list_for_each_entry(pos, &dsos, node)
+		if (strcmp(pos->name, name) == 0)
+			return pos;
+	return NULL;
+}
+
+static struct dso *dsos__findnew(const char *name)
+{
+	struct dso *dso = dsos__find(name);
+	int nr;
+
+	if (dso)
+		return dso;
+
+	dso = dso__new(name, 0);
+	if (!dso)
+		goto out_delete_dso;
+
+	nr = dso__load(dso, NULL, verbose);
+	if (nr < 0) {
+		if (verbose)
+			fprintf(stderr, "Failed to open: %s\n", name);
+		goto out_delete_dso;
+	}
+	if (!nr && verbose) {
+		fprintf(stderr,
+		"No symbols found in: %s, maybe install a debug package?\n",
+				name);
+	}
+
+	dsos__add(dso);
+
+	return dso;
+
+out_delete_dso:
+	dso__delete(dso);
+	return NULL;
+}
+
+static void dsos__fprintf(FILE *fp)
+{
+	struct dso *pos;
+
+	list_for_each_entry(pos, &dsos, node)
+		dso__fprintf(pos, fp);
+}
+
+static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip)
+{
+	return dso__find_symbol(kernel_dso, ip);
+}
+
+static int load_kernel(void)
+{
+	int err;
+
+	kernel_dso = dso__new("[kernel]", 0);
+	if (!kernel_dso)
+		return -1;
+
+	err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
+	if (err) {
+		dso__delete(kernel_dso);
+		kernel_dso = NULL;
+	} else
+		dsos__add(kernel_dso);
+
+	vdso = dso__new("[vdso]", 0);
+	if (!vdso)
+		return -1;
+
+	vdso->find_symbol = vdso__find_symbol;
+
+	dsos__add(vdso);
+
+	return err;
+}
+
+struct map {
+	struct list_head node;
+	__u64	 start;
+	__u64	 end;
+	__u64	 pgoff;
+	__u64	 (*map_ip)(struct map *, __u64);
+	struct dso	 *dso;
+};
+
+static __u64 map__map_ip(struct map *map, __u64 ip)
+{
+	return ip - map->start + map->pgoff;
+}
+
+static __u64 vdso__map_ip(struct map *map, __u64 ip)
+{
+	return ip;
+}
+
+static struct map *map__new(struct mmap_event *event)
+{
+	struct map *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		const char *filename = event->filename;
+
+		self->start = event->start;
+		self->end   = event->start + event->len;
+		self->pgoff = event->pgoff;
+
+		self->dso = dsos__findnew(filename);
+		if (self->dso == NULL)
+			goto out_delete;
+
+		if (self->dso == vdso)
+			self->map_ip = vdso__map_ip;
+		else
+			self->map_ip = map__map_ip;
+	}
+	return self;
+out_delete:
+	free(self);
+	return NULL;
+}
+
+static struct map *map__clone(struct map *self)
+{
+	struct map *map = malloc(sizeof(*self));
+
+	if (!map)
+		return NULL;
+
+	memcpy(map, self, sizeof(*self));
+
+	return map;
+}
+
+static int map__overlap(struct map *l, struct map *r)
+{
+	if (l->start > r->start) {
+		struct map *t = l;
+		l = r;
+		r = t;
+	}
+
+	if (l->end > r->start)
+		return 1;
+
+	return 0;
+}
+
+static size_t map__fprintf(struct map *self, FILE *fp)
+{
+	return fprintf(fp, " %Lx-%Lx %Lx %s\n",
+		       self->start, self->end, self->pgoff, self->dso->name);
+}
+
+
+struct thread {
+	struct rb_node	 rb_node;
+	struct list_head maps;
+	pid_t		 pid;
+	char		 *comm;
+};
+
+static struct thread *thread__new(pid_t pid)
+{
+	struct thread *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		self->pid = pid;
+		self->comm = malloc(32);
+		if (self->comm)
+			snprintf(self->comm, 32, ":%d", self->pid);
+		INIT_LIST_HEAD(&self->maps);
+	}
+
+	return self;
+}
+
+static int thread__set_comm(struct thread *self, const char *comm)
+{
+	if (self->comm)
+		free(self->comm);
+	self->comm = strdup(comm);
+	return self->comm ? 0 : -ENOMEM;
+}
+
+static size_t thread__fprintf(struct thread *self, FILE *fp)
+{
+	struct map *pos;
+	size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
+
+	list_for_each_entry(pos, &self->maps, node)
+		ret += map__fprintf(pos, fp);
+
+	return ret;
+}
+
+
+static struct rb_root threads;
+static struct thread *last_match;
+
+static struct thread *threads__findnew(pid_t pid)
+{
+	struct rb_node **p = &threads.rb_node;
+	struct rb_node *parent = NULL;
+	struct thread *th;
+
+	/*
+	 * Font-end cache - PID lookups come in blocks,
+	 * so most of the time we dont have to look up
+	 * the full rbtree:
+	 */
+	if (last_match && last_match->pid == pid)
+		return last_match;
+
+	while (*p != NULL) {
+		parent = *p;
+		th = rb_entry(parent, struct thread, rb_node);
+
+		if (th->pid == pid) {
+			last_match = th;
+			return th;
+		}
+
+		if (pid < th->pid)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	th = thread__new(pid);
+	if (th != NULL) {
+		rb_link_node(&th->rb_node, parent, p);
+		rb_insert_color(&th->rb_node, &threads);
+		last_match = th;
+	}
+
+	return th;
+}
+
+static void thread__insert_map(struct thread *self, struct map *map)
+{
+	struct map *pos, *tmp;
+
+	list_for_each_entry_safe(pos, tmp, &self->maps, node) {
+		if (map__overlap(pos, map)) {
+			list_del_init(&pos->node);
+			/* XXX leaks dsos */
+			free(pos);
+		}
+	}
+
+	list_add_tail(&map->node, &self->maps);
+}
+
+static int thread__fork(struct thread *self, struct thread *parent)
+{
+	struct map *map;
+
+	if (self->comm)
+		free(self->comm);
+	self->comm = strdup(parent->comm);
+	if (!self->comm)
+		return -ENOMEM;
+
+	list_for_each_entry(map, &parent->maps, node) {
+		struct map *new = map__clone(map);
+		if (!new)
+			return -ENOMEM;
+		thread__insert_map(self, new);
+	}
+
+	return 0;
+}
+
+static struct map *thread__find_map(struct thread *self, __u64 ip)
+{
+	struct map *pos;
+
+	if (self == NULL)
+		return NULL;
+
+	list_for_each_entry(pos, &self->maps, node)
+		if (ip >= pos->start && ip <= pos->end)
+			return pos;
+
+	return NULL;
+}
+
+static size_t threads__fprintf(FILE *fp)
+{
+	size_t ret = 0;
+	struct rb_node *nd;
+
+	for (nd = rb_first(&threads); nd; nd = rb_next(nd)) {
+		struct thread *pos = rb_entry(nd, struct thread, rb_node);
+
+		ret += thread__fprintf(pos, fp);
+	}
+
+	return ret;
+}
+
+/*
+ * histogram, sorted on item, collects counts
+ */
+
+static struct rb_root hist;
+
+struct hist_entry {
+	struct rb_node	 rb_node;
+
+	struct thread	 *thread;
+	struct map	 *map;
+	struct dso	 *dso;
+	struct symbol	 *sym;
+	__u64	 ip;
+	char		 level;
+
+	uint32_t	 count;
+};
+
+/*
+ * configurable sorting bits
+ */
+
+struct sort_entry {
+	struct list_head list;
+
+	char *header;
+
+	int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
+	int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
+	size_t	(*print)(FILE *fp, struct hist_entry *);
+};
+
+/* --sort pid */
+
+static int64_t
+sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+static size_t
+sort__thread_print(FILE *fp, struct hist_entry *self)
+{
+	return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
+}
+
+static struct sort_entry sort_thread = {
+	.header = "         Command:  Pid",
+	.cmp	= sort__thread_cmp,
+	.print	= sort__thread_print,
+};
+
+/* --sort comm */
+
+static int64_t
+sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+static int64_t
+sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	char *comm_l = left->thread->comm;
+	char *comm_r = right->thread->comm;
+
+	if (!comm_l || !comm_r) {
+		if (!comm_l && !comm_r)
+			return 0;
+		else if (!comm_l)
+			return -1;
+		else
+			return 1;
+	}
+
+	return strcmp(comm_l, comm_r);
+}
+
+static size_t
+sort__comm_print(FILE *fp, struct hist_entry *self)
+{
+	return fprintf(fp, "%16s", self->thread->comm);
+}
+
+static struct sort_entry sort_comm = {
+	.header		= "         Command",
+	.cmp		= sort__comm_cmp,
+	.collapse	= sort__comm_collapse,
+	.print		= sort__comm_print,
+};
+
+/* --sort dso */
+
+static int64_t
+sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct dso *dso_l = left->dso;
+	struct dso *dso_r = right->dso;
+
+	if (!dso_l || !dso_r) {
+		if (!dso_l && !dso_r)
+			return 0;
+		else if (!dso_l)
+			return -1;
+		else
+			return 1;
+	}
+
+	return strcmp(dso_l->name, dso_r->name);
+}
+
+static size_t
+sort__dso_print(FILE *fp, struct hist_entry *self)
+{
+	if (self->dso)
+		return fprintf(fp, "%-25s", self->dso->name);
+
+	return fprintf(fp, "%016llx         ", (__u64)self->ip);
+}
+
+static struct sort_entry sort_dso = {
+	.header = "Shared Object            ",
+	.cmp	= sort__dso_cmp,
+	.print	= sort__dso_print,
+};
+
+/* --sort symbol */
+
+static int64_t
+sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	__u64 ip_l, ip_r;
+
+	if (left->sym == right->sym)
+		return 0;
+
+	ip_l = left->sym ? left->sym->start : left->ip;
+	ip_r = right->sym ? right->sym->start : right->ip;
+
+	return (int64_t)(ip_r - ip_l);
+}
+
+static size_t
+sort__sym_print(FILE *fp, struct hist_entry *self)
+{
+	size_t ret = 0;
+
+	if (verbose)
+		ret += fprintf(fp, "%#018llx  ", (__u64)self->ip);
+
+	if (self->sym) {
+		ret += fprintf(fp, "[%c] %s",
+			self->dso == kernel_dso ? 'k' : '.', self->sym->name);
+	} else {
+		ret += fprintf(fp, "%#016llx", (__u64)self->ip);
+	}
+
+	return ret;
+}
+
+static struct sort_entry sort_sym = {
+	.header = "Symbol",
+	.cmp	= sort__sym_cmp,
+	.print	= sort__sym_print,
+};
+
+static int sort__need_collapse = 0;
+
+struct sort_dimension {
+	char			*name;
+	struct sort_entry	*entry;
+	int			taken;
+};
+
+static struct sort_dimension sort_dimensions[] = {
+	{ .name = "pid",	.entry = &sort_thread,	},
+	{ .name = "comm",	.entry = &sort_comm,	},
+	{ .name = "dso",	.entry = &sort_dso,	},
+	{ .name = "symbol",	.entry = &sort_sym,	},
+};
+
+static LIST_HEAD(hist_entry__sort_list);
+
+static int sort_dimension__add(char *tok)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
+		struct sort_dimension *sd = &sort_dimensions[i];
+
+		if (sd->taken)
+			continue;
+
+		if (strncasecmp(tok, sd->name, strlen(tok)))
+			continue;
+
+		if (sd->entry->collapse)
+			sort__need_collapse = 1;
+
+		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
+		sd->taken = 1;
+
+		return 0;
+	}
+
+	return -ESRCH;
+}
+
+static int64_t
+hist_entry__cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct sort_entry *se;
+	int64_t cmp = 0;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		cmp = se->cmp(left, right);
+		if (cmp)
+			break;
+	}
+
+	return cmp;
+}
+
+static int64_t
+hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	struct sort_entry *se;
+	int64_t cmp = 0;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		int64_t (*f)(struct hist_entry *, struct hist_entry *);
+
+		f = se->collapse ?: se->cmp;
+
+		cmp = f(left, right);
+		if (cmp)
+			break;
+	}
+
+	return cmp;
+}
+
+/*
+ * collect histogram counts
+ */
+static void hist_hit(struct hist_entry *he, __u64 ip)
+{
+	unsigned int sym_size, offset;
+	struct symbol *sym = he->sym;
+
+	he->count++;
+
+	if (!sym || !sym->hist)
+		return;
+
+	sym_size = sym->end - sym->start;
+	offset = ip - sym->start;
+
+	if (offset >= sym_size)
+		return;
+
+	sym->hist_sum++;
+	sym->hist[offset]++;
+
+	if (verbose >= 3)
+		printf("%p %s: count++ [ip: %p, %08Lx] => %Ld\n",
+			(void *)(unsigned long)he->sym->start,
+			he->sym->name,
+			(void *)(unsigned long)ip, ip - he->sym->start,
+			sym->hist[offset]);
+}
+
+static int
+hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
+		struct symbol *sym, __u64 ip, char level)
+{
+	struct rb_node **p = &hist.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *he;
+	struct hist_entry entry = {
+		.thread	= thread,
+		.map	= map,
+		.dso	= dso,
+		.sym	= sym,
+		.ip	= ip,
+		.level	= level,
+		.count	= 1,
+	};
+	int cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		he = rb_entry(parent, struct hist_entry, rb_node);
+
+		cmp = hist_entry__cmp(&entry, he);
+
+		if (!cmp) {
+			hist_hit(he, ip);
+
+			return 0;
+		}
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	he = malloc(sizeof(*he));
+	if (!he)
+		return -ENOMEM;
+	*he = entry;
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &hist);
+
+	return 0;
+}
+
+static void hist_entry__free(struct hist_entry *he)
+{
+	free(he);
+}
+
+/*
+ * collapse the histogram
+ */
+
+static struct rb_root collapse_hists;
+
+static void collapse__insert_entry(struct hist_entry *he)
+{
+	struct rb_node **p = &collapse_hists.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *iter;
+	int64_t cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct hist_entry, rb_node);
+
+		cmp = hist_entry__collapse(iter, he);
+
+		if (!cmp) {
+			iter->count += he->count;
+			hist_entry__free(he);
+			return;
+		}
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &collapse_hists);
+}
+
+static void collapse__resort(void)
+{
+	struct rb_node *next;
+	struct hist_entry *n;
+
+	if (!sort__need_collapse)
+		return;
+
+	next = rb_first(&hist);
+	while (next) {
+		n = rb_entry(next, struct hist_entry, rb_node);
+		next = rb_next(&n->rb_node);
+
+		rb_erase(&n->rb_node, &hist);
+		collapse__insert_entry(n);
+	}
+}
+
+/*
+ * reverse the map, sort on count.
+ */
+
+static struct rb_root output_hists;
+
+static void output__insert_entry(struct hist_entry *he)
+{
+	struct rb_node **p = &output_hists.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *iter;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct hist_entry, rb_node);
+
+		if (he->count > iter->count)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &output_hists);
+}
+
+static void output__resort(void)
+{
+	struct rb_node *next;
+	struct hist_entry *n;
+	struct rb_root *tree = &hist;
+
+	if (sort__need_collapse)
+		tree = &collapse_hists;
+
+	next = rb_first(tree);
+
+	while (next) {
+		n = rb_entry(next, struct hist_entry, rb_node);
+		next = rb_next(&n->rb_node);
+
+		rb_erase(&n->rb_node, tree);
+		output__insert_entry(n);
+	}
+}
+
+static void register_idle_thread(void)
+{
+	struct thread *thread = threads__findnew(0);
+
+	if (thread == NULL ||
+			thread__set_comm(thread, "[idle]")) {
+		fprintf(stderr, "problem inserting idle task.\n");
+		exit(-1);
+	}
+}
+
+static unsigned long total = 0,
+		     total_mmap = 0,
+		     total_comm = 0,
+		     total_fork = 0,
+		     total_unknown = 0;
+
+static int
+process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	char level;
+	int show = 0;
+	struct dso *dso = NULL;
+	struct thread *thread = threads__findnew(event->ip.pid);
+	__u64 ip = event->ip.ip;
+	struct map *map = NULL;
+
+	dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->header.misc,
+		event->ip.pid,
+		(void *)(long)ip);
+
+	dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
+	if (thread == NULL) {
+		fprintf(stderr, "problem processing %d event, skipping it.\n",
+			event->header.type);
+		return -1;
+	}
+
+	if (event->header.misc & PERF_EVENT_MISC_KERNEL) {
+		show = SHOW_KERNEL;
+		level = 'k';
+
+		dso = kernel_dso;
+
+		dprintf(" ...... dso: %s\n", dso->name);
+
+	} else if (event->header.misc & PERF_EVENT_MISC_USER) {
+
+		show = SHOW_USER;
+		level = '.';
+
+		map = thread__find_map(thread, ip);
+		if (map != NULL) {
+			ip = map->map_ip(map, ip);
+			dso = map->dso;
+		} else {
+			/*
+			 * If this is outside of all known maps,
+			 * and is a negative address, try to look it
+			 * up in the kernel dso, as it might be a
+			 * vsyscall (which executes in user-mode):
+			 */
+			if ((long long)ip < 0)
+				dso = kernel_dso;
+		}
+		dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+
+	} else {
+		show = SHOW_HV;
+		level = 'H';
+		dprintf(" ...... dso: [hypervisor]\n");
+	}
+
+	if (show & show_mask) {
+		struct symbol *sym = NULL;
+
+		if (dso)
+			sym = dso->find_symbol(dso, ip);
+
+		if (hist_entry__add(thread, map, dso, sym, ip, level)) {
+			fprintf(stderr,
+		"problem incrementing symbol count, skipping event\n");
+			return -1;
+		}
+	}
+	total++;
+
+	return 0;
+}
+
+static int
+process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread = threads__findnew(event->mmap.pid);
+	struct map *map = map__new(&event->mmap);
+
+	dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->mmap.pid,
+		(void *)(long)event->mmap.start,
+		(void *)(long)event->mmap.len,
+		(void *)(long)event->mmap.pgoff,
+		event->mmap.filename);
+
+	if (thread == NULL || map == NULL) {
+		dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n");
+		return 0;
+	}
+
+	thread__insert_map(thread, map);
+	total_mmap++;
+
+	return 0;
+}
+
+static int
+process_comm_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread = threads__findnew(event->comm.pid);
+
+	dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->comm.comm, event->comm.pid);
+
+	if (thread == NULL ||
+	    thread__set_comm(thread, event->comm.comm)) {
+		dprintf("problem processing PERF_EVENT_COMM, skipping event.\n");
+		return -1;
+	}
+	total_comm++;
+
+	return 0;
+}
+
+static int
+process_fork_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread = threads__findnew(event->fork.pid);
+	struct thread *parent = threads__findnew(event->fork.ppid);
+
+	dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->fork.pid, event->fork.ppid);
+
+	if (!thread || !parent || thread__fork(thread, parent)) {
+		dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
+		return -1;
+	}
+	total_fork++;
+
+	return 0;
+}
+
+static int
+process_period_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->period.time,
+		event->period.id,
+		event->period.sample_period);
+
+	return 0;
+}
+
+static int
+process_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
+		return process_overflow_event(event, offset, head);
+
+	switch (event->header.type) {
+	case PERF_EVENT_MMAP:
+		return process_mmap_event(event, offset, head);
+
+	case PERF_EVENT_COMM:
+		return process_comm_event(event, offset, head);
+
+	case PERF_EVENT_FORK:
+		return process_fork_event(event, offset, head);
+
+	case PERF_EVENT_PERIOD:
+		return process_period_event(event, offset, head);
+	/*
+	 * We dont process them right now but they are fine:
+	 */
+
+	case PERF_EVENT_THROTTLE:
+	case PERF_EVENT_UNTHROTTLE:
+		return 0;
+
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+parse_line(FILE *file, struct symbol *sym, __u64 start, __u64 len)
+{
+	char *line = NULL, *tmp, *tmp2;
+	unsigned int offset;
+	size_t line_len;
+	__u64 line_ip;
+	int ret;
+	char *c;
+
+	if (getline(&line, &line_len, file) < 0)
+		return -1;
+	if (!line)
+		return -1;
+
+	c = strchr(line, '\n');
+	if (c)
+		*c = 0;
+
+	line_ip = -1;
+	offset = 0;
+	ret = -2;
+
+	/*
+	 * Strip leading spaces:
+	 */
+	tmp = line;
+	while (*tmp) {
+		if (*tmp != ' ')
+			break;
+		tmp++;
+	}
+
+	if (*tmp) {
+		/*
+		 * Parse hexa addresses followed by ':'
+		 */
+		line_ip = strtoull(tmp, &tmp2, 16);
+		if (*tmp2 != ':')
+			line_ip = -1;
+	}
+
+	if (line_ip != -1) {
+		unsigned int hits = 0;
+		double percent = 0.0;
+		char *color = PERF_COLOR_NORMAL;
+
+		offset = line_ip - start;
+		if (offset < len)
+			hits = sym->hist[offset];
+
+		if (sym->hist_sum)
+			percent = 100.0 * hits / sym->hist_sum;
+
+		/*
+		 * We color high-overhead entries in red, mid-overhead
+		 * entries in green - and keep the low overhead places
+		 * normal:
+		 */
+		if (percent >= 5.0)
+			color = PERF_COLOR_RED;
+		else {
+			if (percent > 0.5)
+				color = PERF_COLOR_GREEN;
+		}
+
+		color_fprintf(stdout, color, " %7.2f", percent);
+		printf(" :	");
+		color_fprintf(stdout, PERF_COLOR_BLUE, "%s\n", line);
+	} else {
+		if (!*line)
+			printf("         :\n");
+		else
+			printf("         :	%s\n", line);
+	}
+
+	return 0;
+}
+
+static void annotate_sym(struct dso *dso, struct symbol *sym)
+{
+	char *filename = dso->name;
+	__u64 start, end, len;
+	char command[PATH_MAX*2];
+	FILE *file;
+
+	if (!filename)
+		return;
+	if (dso == kernel_dso)
+		filename = vmlinux;
+
+	printf("\n------------------------------------------------\n");
+	printf(" Percent |	Source code & Disassembly of %s\n", filename);
+	printf("------------------------------------------------\n");
+
+	if (verbose >= 2)
+		printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
+
+	start = sym->obj_start;
+	if (!start)
+		start = sym->start;
+
+	end = start + sym->end - sym->start + 1;
+	len = sym->end - sym->start;
+
+	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (__u64)start, (__u64)end, filename);
+
+	if (verbose >= 3)
+		printf("doing: %s\n", command);
+
+	file = popen(command, "r");
+	if (!file)
+		return;
+
+	while (!feof(file)) {
+		if (parse_line(file, sym, start, len) < 0)
+			break;
+	}
+
+	pclose(file);
+}
+
+static void find_annotations(void)
+{
+	struct rb_node *nd;
+	struct dso *dso;
+	int count = 0;
+
+	list_for_each_entry(dso, &dsos, node) {
+
+		for (nd = rb_first(&dso->syms); nd; nd = rb_next(nd)) {
+			struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
+
+			if (sym->hist) {
+				annotate_sym(dso, sym);
+				count++;
+			}
+		}
+	}
+
+	if (!count)
+		printf(" Error: symbol '%s' not present amongst the samples.\n", sym_hist_filter);
+}
+
+static int __cmd_annotate(void)
+{
+	int ret, rc = EXIT_FAILURE;
+	unsigned long offset = 0;
+	unsigned long head = 0;
+	struct stat stat;
+	event_t *event;
+	uint32_t size;
+	char *buf;
+
+	register_idle_thread();
+
+	input = open(input_name, O_RDONLY);
+	if (input < 0) {
+		perror("failed to open file");
+		exit(-1);
+	}
+
+	ret = fstat(input, &stat);
+	if (ret < 0) {
+		perror("failed to stat file");
+		exit(-1);
+	}
+
+	if (!stat.st_size) {
+		fprintf(stderr, "zero-sized file, nothing to do!\n");
+		exit(0);
+	}
+
+	if (load_kernel() < 0) {
+		perror("failed to load kernel symbols");
+		return EXIT_FAILURE;
+	}
+
+remap:
+	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
+			   MAP_SHARED, input, offset);
+	if (buf == MAP_FAILED) {
+		perror("failed to mmap file");
+		exit(-1);
+	}
+
+more:
+	event = (event_t *)(buf + head);
+
+	size = event->header.size;
+	if (!size)
+		size = 8;
+
+	if (head + event->header.size >= page_size * mmap_window) {
+		unsigned long shift = page_size * (head / page_size);
+		int ret;
+
+		ret = munmap(buf, page_size * mmap_window);
+		assert(ret == 0);
+
+		offset += shift;
+		head -= shift;
+		goto remap;
+	}
+
+	size = event->header.size;
+
+	dprintf("%p [%p]: event: %d\n",
+			(void *)(offset + head),
+			(void *)(long)event->header.size,
+			event->header.type);
+
+	if (!size || process_event(event, offset, head) < 0) {
+
+		dprintf("%p [%p]: skipping unknown header type: %d\n",
+			(void *)(offset + head),
+			(void *)(long)(event->header.size),
+			event->header.type);
+
+		total_unknown++;
+
+		/*
+		 * assume we lost track of the stream, check alignment, and
+		 * increment a single u64 in the hope to catch on again 'soon'.
+		 */
+
+		if (unlikely(head & 7))
+			head &= ~7ULL;
+
+		size = 8;
+	}
+
+	head += size;
+
+	if (offset + head < stat.st_size)
+		goto more;
+
+	rc = EXIT_SUCCESS;
+	close(input);
+
+	dprintf("      IP events: %10ld\n", total);
+	dprintf("    mmap events: %10ld\n", total_mmap);
+	dprintf("    comm events: %10ld\n", total_comm);
+	dprintf("    fork events: %10ld\n", total_fork);
+	dprintf(" unknown events: %10ld\n", total_unknown);
+
+	if (dump_trace)
+		return 0;
+
+	if (verbose >= 3)
+		threads__fprintf(stdout);
+
+	if (verbose >= 2)
+		dsos__fprintf(stdout);
+
+	collapse__resort();
+	output__resort();
+
+	find_annotations();
+
+	return rc;
+}
+
+static const char * const annotate_usage[] = {
+	"perf annotate [<options>] <command>",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_STRING('i', "input", &input_name, "file",
+		    "input file name"),
+	OPT_STRING('s', "symbol", &sym_hist_filter, "symbol",
+		    "symbol to annotate"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+		    "dump raw trace in ASCII"),
+	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+	OPT_END()
+};
+
+static void setup_sorting(void)
+{
+	char *tmp, *tok, *str = strdup(sort_order);
+
+	for (tok = strtok_r(str, ", ", &tmp);
+			tok; tok = strtok_r(NULL, ", ", &tmp)) {
+		if (sort_dimension__add(tok) < 0) {
+			error("Unknown --sort key: `%s'", tok);
+			usage_with_options(annotate_usage, options);
+		}
+	}
+
+	free(str);
+}
+
+int cmd_annotate(int argc, const char **argv, const char *prefix)
+{
+	symbol__init();
+
+	page_size = getpagesize();
+
+	argc = parse_options(argc, argv, options, annotate_usage, 0);
+
+	setup_sorting();
+
+	if (argc) {
+		/*
+		 * Special case: if there's an argument left then assume tha
+		 * it's a symbol filter:
+		 */
+		if (argc > 1)
+			usage_with_options(annotate_usage, options);
+
+		sym_hist_filter = argv[0];
+	}
+
+	if (!sym_hist_filter)
+		usage_with_options(annotate_usage, options);
+
+	setup_pager();
+
+	return __cmd_annotate();
+}
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
new file mode 100644
index 00000000000..0f32dc3f3c4
--- /dev/null
+++ b/tools/perf/builtin-help.c
@@ -0,0 +1,461 @@
+/*
+ * builtin-help.c
+ *
+ * Builtin help command
+ */
+#include "util/cache.h"
+#include "builtin.h"
+#include "util/exec_cmd.h"
+#include "common-cmds.h"
+#include "util/parse-options.h"
+#include "util/run-command.h"
+#include "util/help.h"
+
+static struct man_viewer_list {
+	struct man_viewer_list *next;
+	char name[FLEX_ARRAY];
+} *man_viewer_list;
+
+static struct man_viewer_info_list {
+	struct man_viewer_info_list *next;
+	const char *info;
+	char name[FLEX_ARRAY];
+} *man_viewer_info_list;
+
+enum help_format {
+	HELP_FORMAT_MAN,
+	HELP_FORMAT_INFO,
+	HELP_FORMAT_WEB,
+};
+
+static int show_all = 0;
+static enum help_format help_format = HELP_FORMAT_MAN;
+static struct option builtin_help_options[] = {
+	OPT_BOOLEAN('a', "all", &show_all, "print all available commands"),
+	OPT_SET_INT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN),
+	OPT_SET_INT('w', "web", &help_format, "show manual in web browser",
+			HELP_FORMAT_WEB),
+	OPT_SET_INT('i', "info", &help_format, "show info page",
+			HELP_FORMAT_INFO),
+	OPT_END(),
+};
+
+static const char * const builtin_help_usage[] = {
+	"perf help [--all] [--man|--web|--info] [command]",
+	NULL
+};
+
+static enum help_format parse_help_format(const char *format)
+{
+	if (!strcmp(format, "man"))
+		return HELP_FORMAT_MAN;
+	if (!strcmp(format, "info"))
+		return HELP_FORMAT_INFO;
+	if (!strcmp(format, "web") || !strcmp(format, "html"))
+		return HELP_FORMAT_WEB;
+	die("unrecognized help format '%s'", format);
+}
+
+static const char *get_man_viewer_info(const char *name)
+{
+	struct man_viewer_info_list *viewer;
+
+	for (viewer = man_viewer_info_list; viewer; viewer = viewer->next)
+	{
+		if (!strcasecmp(name, viewer->name))
+			return viewer->info;
+	}
+	return NULL;
+}
+
+static int check_emacsclient_version(void)
+{
+	struct strbuf buffer = STRBUF_INIT;
+	struct child_process ec_process;
+	const char *argv_ec[] = { "emacsclient", "--version", NULL };
+	int version;
+
+	/* emacsclient prints its version number on stderr */
+	memset(&ec_process, 0, sizeof(ec_process));
+	ec_process.argv = argv_ec;
+	ec_process.err = -1;
+	ec_process.stdout_to_stderr = 1;
+	if (start_command(&ec_process)) {
+		fprintf(stderr, "Failed to start emacsclient.\n");
+		return -1;
+	}
+	strbuf_read(&buffer, ec_process.err, 20);
+	close(ec_process.err);
+
+	/*
+	 * Don't bother checking return value, because "emacsclient --version"
+	 * seems to always exits with code 1.
+	 */
+	finish_command(&ec_process);
+
+	if (prefixcmp(buffer.buf, "emacsclient")) {
+		fprintf(stderr, "Failed to parse emacsclient version.\n");
+		strbuf_release(&buffer);
+		return -1;
+	}
+
+	strbuf_remove(&buffer, 0, strlen("emacsclient"));
+	version = atoi(buffer.buf);
+
+	if (version < 22) {
+		fprintf(stderr,
+			"emacsclient version '%d' too old (< 22).\n",
+			version);
+		strbuf_release(&buffer);
+		return -1;
+	}
+
+	strbuf_release(&buffer);
+	return 0;
+}
+
+static void exec_woman_emacs(const char* path, const char *page)
+{
+	if (!check_emacsclient_version()) {
+		/* This works only with emacsclient version >= 22. */
+		struct strbuf man_page = STRBUF_INIT;
+
+		if (!path)
+			path = "emacsclient";
+		strbuf_addf(&man_page, "(woman \"%s\")", page);
+		execlp(path, "emacsclient", "-e", man_page.buf, NULL);
+		warning("failed to exec '%s': %s", path, strerror(errno));
+	}
+}
+
+static void exec_man_konqueror(const char* path, const char *page)
+{
+	const char *display = getenv("DISPLAY");
+	if (display && *display) {
+		struct strbuf man_page = STRBUF_INIT;
+		const char *filename = "kfmclient";
+
+		/* It's simpler to launch konqueror using kfmclient. */
+		if (path) {
+			const char *file = strrchr(path, '/');
+			if (file && !strcmp(file + 1, "konqueror")) {
+				char *new = strdup(path);
+				char *dest = strrchr(new, '/');
+
+				/* strlen("konqueror") == strlen("kfmclient") */
+				strcpy(dest + 1, "kfmclient");
+				path = new;
+			}
+			if (file)
+				filename = file;
+		} else
+			path = "kfmclient";
+		strbuf_addf(&man_page, "man:%s(1)", page);
+		execlp(path, filename, "newTab", man_page.buf, NULL);
+		warning("failed to exec '%s': %s", path, strerror(errno));
+	}
+}
+
+static void exec_man_man(const char* path, const char *page)
+{
+	if (!path)
+		path = "man";
+	execlp(path, "man", page, NULL);
+	warning("failed to exec '%s': %s", path, strerror(errno));
+}
+
+static void exec_man_cmd(const char *cmd, const char *page)
+{
+	struct strbuf shell_cmd = STRBUF_INIT;
+	strbuf_addf(&shell_cmd, "%s %s", cmd, page);
+	execl("/bin/sh", "sh", "-c", shell_cmd.buf, NULL);
+	warning("failed to exec '%s': %s", cmd, strerror(errno));
+}
+
+static void add_man_viewer(const char *name)
+{
+	struct man_viewer_list **p = &man_viewer_list;
+	size_t len = strlen(name);
+
+	while (*p)
+		p = &((*p)->next);
+	*p = calloc(1, (sizeof(**p) + len + 1));
+	strncpy((*p)->name, name, len);
+}
+
+static int supported_man_viewer(const char *name, size_t len)
+{
+	return (!strncasecmp("man", name, len) ||
+		!strncasecmp("woman", name, len) ||
+		!strncasecmp("konqueror", name, len));
+}
+
+static void do_add_man_viewer_info(const char *name,
+				   size_t len,
+				   const char *value)
+{
+	struct man_viewer_info_list *new = calloc(1, sizeof(*new) + len + 1);
+
+	strncpy(new->name, name, len);
+	new->info = strdup(value);
+	new->next = man_viewer_info_list;
+	man_viewer_info_list = new;
+}
+
+static int add_man_viewer_path(const char *name,
+			       size_t len,
+			       const char *value)
+{
+	if (supported_man_viewer(name, len))
+		do_add_man_viewer_info(name, len, value);
+	else
+		warning("'%s': path for unsupported man viewer.\n"
+			"Please consider using 'man.<tool>.cmd' instead.",
+			name);
+
+	return 0;
+}
+
+static int add_man_viewer_cmd(const char *name,
+			      size_t len,
+			      const char *value)
+{
+	if (supported_man_viewer(name, len))
+		warning("'%s': cmd for supported man viewer.\n"
+			"Please consider using 'man.<tool>.path' instead.",
+			name);
+	else
+		do_add_man_viewer_info(name, len, value);
+
+	return 0;
+}
+
+static int add_man_viewer_info(const char *var, const char *value)
+{
+	const char *name = var + 4;
+	const char *subkey = strrchr(name, '.');
+
+	if (!subkey)
+		return error("Config with no key for man viewer: %s", name);
+
+	if (!strcmp(subkey, ".path")) {
+		if (!value)
+			return config_error_nonbool(var);
+		return add_man_viewer_path(name, subkey - name, value);
+	}
+	if (!strcmp(subkey, ".cmd")) {
+		if (!value)
+			return config_error_nonbool(var);
+		return add_man_viewer_cmd(name, subkey - name, value);
+	}
+
+	warning("'%s': unsupported man viewer sub key.", subkey);
+	return 0;
+}
+
+static int perf_help_config(const char *var, const char *value, void *cb)
+{
+	if (!strcmp(var, "help.format")) {
+		if (!value)
+			return config_error_nonbool(var);
+		help_format = parse_help_format(value);
+		return 0;
+	}
+	if (!strcmp(var, "man.viewer")) {
+		if (!value)
+			return config_error_nonbool(var);
+		add_man_viewer(value);
+		return 0;
+	}
+	if (!prefixcmp(var, "man."))
+		return add_man_viewer_info(var, value);
+
+	return perf_default_config(var, value, cb);
+}
+
+static struct cmdnames main_cmds, other_cmds;
+
+void list_common_cmds_help(void)
+{
+	int i, longest = 0;
+
+	for (i = 0; i < ARRAY_SIZE(common_cmds); i++) {
+		if (longest < strlen(common_cmds[i].name))
+			longest = strlen(common_cmds[i].name);
+	}
+
+	puts(" The most commonly used perf commands are:");
+	for (i = 0; i < ARRAY_SIZE(common_cmds); i++) {
+		printf("   %s   ", common_cmds[i].name);
+		mput_char(' ', longest - strlen(common_cmds[i].name));
+		puts(common_cmds[i].help);
+	}
+}
+
+static int is_perf_command(const char *s)
+{
+	return is_in_cmdlist(&main_cmds, s) ||
+		is_in_cmdlist(&other_cmds, s);
+}
+
+static const char *prepend(const char *prefix, const char *cmd)
+{
+	size_t pre_len = strlen(prefix);
+	size_t cmd_len = strlen(cmd);
+	char *p = malloc(pre_len + cmd_len + 1);
+	memcpy(p, prefix, pre_len);
+	strcpy(p + pre_len, cmd);
+	return p;
+}
+
+static const char *cmd_to_page(const char *perf_cmd)
+{
+	if (!perf_cmd)
+		return "perf";
+	else if (!prefixcmp(perf_cmd, "perf"))
+		return perf_cmd;
+	else if (is_perf_command(perf_cmd))
+		return prepend("perf-", perf_cmd);
+	else
+		return prepend("perf-", perf_cmd);
+}
+
+static void setup_man_path(void)
+{
+	struct strbuf new_path = STRBUF_INIT;
+	const char *old_path = getenv("MANPATH");
+
+	/* We should always put ':' after our path. If there is no
+	 * old_path, the ':' at the end will let 'man' to try
+	 * system-wide paths after ours to find the manual page. If
+	 * there is old_path, we need ':' as delimiter. */
+	strbuf_addstr(&new_path, system_path(PERF_MAN_PATH));
+	strbuf_addch(&new_path, ':');
+	if (old_path)
+		strbuf_addstr(&new_path, old_path);
+
+	setenv("MANPATH", new_path.buf, 1);
+
+	strbuf_release(&new_path);
+}
+
+static void exec_viewer(const char *name, const char *page)
+{
+	const char *info = get_man_viewer_info(name);
+
+	if (!strcasecmp(name, "man"))
+		exec_man_man(info, page);
+	else if (!strcasecmp(name, "woman"))
+		exec_woman_emacs(info, page);
+	else if (!strcasecmp(name, "konqueror"))
+		exec_man_konqueror(info, page);
+	else if (info)
+		exec_man_cmd(info, page);
+	else
+		warning("'%s': unknown man viewer.", name);
+}
+
+static void show_man_page(const char *perf_cmd)
+{
+	struct man_viewer_list *viewer;
+	const char *page = cmd_to_page(perf_cmd);
+	const char *fallback = getenv("PERF_MAN_VIEWER");
+
+	setup_man_path();
+	for (viewer = man_viewer_list; viewer; viewer = viewer->next)
+	{
+		exec_viewer(viewer->name, page); /* will return when unable */
+	}
+	if (fallback)
+		exec_viewer(fallback, page);
+	exec_viewer("man", page);
+	die("no man viewer handled the request");
+}
+
+static void show_info_page(const char *perf_cmd)
+{
+	const char *page = cmd_to_page(perf_cmd);
+	setenv("INFOPATH", system_path(PERF_INFO_PATH), 1);
+	execlp("info", "info", "perfman", page, NULL);
+}
+
+static void get_html_page_path(struct strbuf *page_path, const char *page)
+{
+	struct stat st;
+	const char *html_path = system_path(PERF_HTML_PATH);
+
+	/* Check that we have a perf documentation directory. */
+	if (stat(mkpath("%s/perf.html", html_path), &st)
+	    || !S_ISREG(st.st_mode))
+		die("'%s': not a documentation directory.", html_path);
+
+	strbuf_init(page_path, 0);
+	strbuf_addf(page_path, "%s/%s.html", html_path, page);
+}
+
+/*
+ * If open_html is not defined in a platform-specific way (see for
+ * example compat/mingw.h), we use the script web--browse to display
+ * HTML.
+ */
+#ifndef open_html
+static void open_html(const char *path)
+{
+	execl_perf_cmd("web--browse", "-c", "help.browser", path, NULL);
+}
+#endif
+
+static void show_html_page(const char *perf_cmd)
+{
+	const char *page = cmd_to_page(perf_cmd);
+	struct strbuf page_path; /* it leaks but we exec bellow */
+
+	get_html_page_path(&page_path, page);
+
+	open_html(page_path.buf);
+}
+
+int cmd_help(int argc, const char **argv, const char *prefix)
+{
+	const char *alias;
+	load_command_list("perf-", &main_cmds, &other_cmds);
+
+	perf_config(perf_help_config, NULL);
+
+	argc = parse_options(argc, argv, builtin_help_options,
+			builtin_help_usage, 0);
+
+	if (show_all) {
+		printf("\n usage: %s\n\n", perf_usage_string);
+		list_commands("perf commands", &main_cmds, &other_cmds);
+		printf(" %s\n\n", perf_more_info_string);
+		return 0;
+	}
+
+	if (!argv[0]) {
+		printf("\n usage: %s\n\n", perf_usage_string);
+		list_common_cmds_help();
+		printf("\n %s\n\n", perf_more_info_string);
+		return 0;
+	}
+
+	alias = alias_lookup(argv[0]);
+	if (alias && !is_perf_command(argv[0])) {
+		printf("`perf %s' is aliased to `%s'\n", argv[0], alias);
+		return 0;
+	}
+
+	switch (help_format) {
+	case HELP_FORMAT_MAN:
+		show_man_page(argv[0]);
+		break;
+	case HELP_FORMAT_INFO:
+		show_info_page(argv[0]);
+		break;
+	case HELP_FORMAT_WEB:
+		show_html_page(argv[0]);
+		break;
+	}
+
+	return 0;
+}
diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c
new file mode 100644
index 00000000000..fe60e37c96e
--- /dev/null
+++ b/tools/perf/builtin-list.c
@@ -0,0 +1,20 @@
+/*
+ * builtin-list.c
+ *
+ * Builtin list command: list all event types
+ *
+ * Copyright (C) 2009, Thomas Gleixner <tglx@linutronix.de>
+ * Copyright (C) 2008-2009, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
+ */
+#include "builtin.h"
+
+#include "perf.h"
+
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+
+int cmd_list(int argc, const char **argv, const char *prefix)
+{
+	print_events();
+	return 0;
+}
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
new file mode 100644
index 00000000000..0f5771f615d
--- /dev/null
+++ b/tools/perf/builtin-record.c
@@ -0,0 +1,585 @@
+/*
+ * builtin-record.c
+ *
+ * Builtin record command: Record the profile of a workload
+ * (or a CPU, or a PID) into the perf.data output file - for
+ * later analysis via perf report.
+ */
+#include "builtin.h"
+
+#include "perf.h"
+
+#include "util/util.h"
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+#include "util/string.h"
+
+#include <unistd.h>
+#include <sched.h>
+
+#define ALIGN(x, a)		__ALIGN_MASK(x, (typeof(x))(a)-1)
+#define __ALIGN_MASK(x, mask)	(((x)+(mask))&~(mask))
+
+static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
+
+static long			default_interval		= 100000;
+
+static int			nr_cpus				= 0;
+static unsigned int		page_size;
+static unsigned int		mmap_pages			= 128;
+static int			freq				= 0;
+static int			output;
+static const char		*output_name			= "perf.data";
+static int			group				= 0;
+static unsigned int		realtime_prio			= 0;
+static int			system_wide			= 0;
+static pid_t			target_pid			= -1;
+static int			inherit				= 1;
+static int			force				= 0;
+static int			append_file			= 0;
+static int			verbose				= 0;
+
+static long			samples;
+static struct timeval		last_read;
+static struct timeval		this_read;
+
+static __u64			bytes_written;
+
+static struct pollfd		event_array[MAX_NR_CPUS * MAX_COUNTERS];
+
+static int			nr_poll;
+static int			nr_cpu;
+
+struct mmap_event {
+	struct perf_event_header	header;
+	__u32				pid;
+	__u32				tid;
+	__u64				start;
+	__u64				len;
+	__u64				pgoff;
+	char				filename[PATH_MAX];
+};
+
+struct comm_event {
+	struct perf_event_header	header;
+	__u32				pid;
+	__u32				tid;
+	char				comm[16];
+};
+
+
+struct mmap_data {
+	int			counter;
+	void			*base;
+	unsigned int		mask;
+	unsigned int		prev;
+};
+
+static struct mmap_data		mmap_array[MAX_NR_CPUS][MAX_COUNTERS];
+
+static unsigned int mmap_read_head(struct mmap_data *md)
+{
+	struct perf_counter_mmap_page *pc = md->base;
+	int head;
+
+	head = pc->data_head;
+	rmb();
+
+	return head;
+}
+
+static void mmap_read(struct mmap_data *md)
+{
+	unsigned int head = mmap_read_head(md);
+	unsigned int old = md->prev;
+	unsigned char *data = md->base + page_size;
+	unsigned long size;
+	void *buf;
+	int diff;
+
+	gettimeofday(&this_read, NULL);
+
+	/*
+	 * If we're further behind than half the buffer, there's a chance
+	 * the writer will bite our tail and mess up the samples under us.
+	 *
+	 * If we somehow ended up ahead of the head, we got messed up.
+	 *
+	 * In either case, truncate and restart at head.
+	 */
+	diff = head - old;
+	if (diff > md->mask / 2 || diff < 0) {
+		struct timeval iv;
+		unsigned long msecs;
+
+		timersub(&this_read, &last_read, &iv);
+		msecs = iv.tv_sec*1000 + iv.tv_usec/1000;
+
+		fprintf(stderr, "WARNING: failed to keep up with mmap data."
+				"  Last read %lu msecs ago.\n", msecs);
+
+		/*
+		 * head points to a known good entry, start there.
+		 */
+		old = head;
+	}
+
+	last_read = this_read;
+
+	if (old != head)
+		samples++;
+
+	size = head - old;
+
+	if ((old & md->mask) + size != (head & md->mask)) {
+		buf = &data[old & md->mask];
+		size = md->mask + 1 - (old & md->mask);
+		old += size;
+
+		while (size) {
+			int ret = write(output, buf, size);
+
+			if (ret < 0)
+				die("failed to write");
+
+			size -= ret;
+			buf += ret;
+
+			bytes_written += ret;
+		}
+	}
+
+	buf = &data[old & md->mask];
+	size = head - old;
+	old += size;
+
+	while (size) {
+		int ret = write(output, buf, size);
+
+		if (ret < 0)
+			die("failed to write");
+
+		size -= ret;
+		buf += ret;
+
+		bytes_written += ret;
+	}
+
+	md->prev = old;
+}
+
+static volatile int done = 0;
+static volatile int signr = -1;
+
+static void sig_handler(int sig)
+{
+	done = 1;
+	signr = sig;
+}
+
+static void sig_atexit(void)
+{
+	if (signr == -1)
+		return;
+
+	signal(signr, SIG_DFL);
+	kill(getpid(), signr);
+}
+
+static void pid_synthesize_comm_event(pid_t pid, int full)
+{
+	struct comm_event comm_ev;
+	char filename[PATH_MAX];
+	char bf[BUFSIZ];
+	int fd, ret;
+	size_t size;
+	char *field, *sep;
+	DIR *tasks;
+	struct dirent dirent, *next;
+
+	snprintf(filename, sizeof(filename), "/proc/%d/stat", pid);
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "couldn't open %s\n", filename);
+		exit(EXIT_FAILURE);
+	}
+	if (read(fd, bf, sizeof(bf)) < 0) {
+		fprintf(stderr, "couldn't read %s\n", filename);
+		exit(EXIT_FAILURE);
+	}
+	close(fd);
+
+	/* 9027 (cat) R 6747 9027 6747 34816 9027 ... */
+	memset(&comm_ev, 0, sizeof(comm_ev));
+	field = strchr(bf, '(');
+	if (field == NULL)
+		goto out_failure;
+	sep = strchr(++field, ')');
+	if (sep == NULL)
+		goto out_failure;
+	size = sep - field;
+	memcpy(comm_ev.comm, field, size++);
+
+	comm_ev.pid = pid;
+	comm_ev.header.type = PERF_EVENT_COMM;
+	size = ALIGN(size, sizeof(__u64));
+	comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size);
+
+	if (!full) {
+		comm_ev.tid = pid;
+
+		ret = write(output, &comm_ev, comm_ev.header.size);
+		if (ret < 0) {
+			perror("failed to write");
+			exit(-1);
+		}
+		return;
+	}
+
+	snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
+
+	tasks = opendir(filename);
+	while (!readdir_r(tasks, &dirent, &next) && next) {
+		char *end;
+		pid = strtol(dirent.d_name, &end, 10);
+		if (*end)
+			continue;
+
+		comm_ev.tid = pid;
+
+		ret = write(output, &comm_ev, comm_ev.header.size);
+		if (ret < 0) {
+			perror("failed to write");
+			exit(-1);
+		}
+	}
+	closedir(tasks);
+	return;
+
+out_failure:
+	fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n",
+		filename);
+	exit(EXIT_FAILURE);
+}
+
+static void pid_synthesize_mmap_samples(pid_t pid)
+{
+	char filename[PATH_MAX];
+	FILE *fp;
+
+	snprintf(filename, sizeof(filename), "/proc/%d/maps", pid);
+
+	fp = fopen(filename, "r");
+	if (fp == NULL) {
+		fprintf(stderr, "couldn't open %s\n", filename);
+		exit(EXIT_FAILURE);
+	}
+	while (1) {
+		char bf[BUFSIZ], *pbf = bf;
+		struct mmap_event mmap_ev = {
+			.header.type = PERF_EVENT_MMAP,
+		};
+		int n;
+		size_t size;
+		if (fgets(bf, sizeof(bf), fp) == NULL)
+			break;
+
+		/* 00400000-0040c000 r-xp 00000000 fd:01 41038  /bin/cat */
+		n = hex2u64(pbf, &mmap_ev.start);
+		if (n < 0)
+			continue;
+		pbf += n + 1;
+		n = hex2u64(pbf, &mmap_ev.len);
+		if (n < 0)
+			continue;
+		pbf += n + 3;
+		if (*pbf == 'x') { /* vm_exec */
+			char *execname = strrchr(bf, ' ');
+
+			if (execname == NULL || execname[1] != '/')
+				continue;
+
+			execname += 1;
+			size = strlen(execname);
+			execname[size - 1] = '\0'; /* Remove \n */
+			memcpy(mmap_ev.filename, execname, size);
+			size = ALIGN(size, sizeof(__u64));
+			mmap_ev.len -= mmap_ev.start;
+			mmap_ev.header.size = (sizeof(mmap_ev) -
+					       (sizeof(mmap_ev.filename) - size));
+			mmap_ev.pid = pid;
+			mmap_ev.tid = pid;
+
+			if (write(output, &mmap_ev, mmap_ev.header.size) < 0) {
+				perror("failed to write");
+				exit(-1);
+			}
+		}
+	}
+
+	fclose(fp);
+}
+
+static void synthesize_samples(void)
+{
+	DIR *proc;
+	struct dirent dirent, *next;
+
+	proc = opendir("/proc");
+
+	while (!readdir_r(proc, &dirent, &next) && next) {
+		char *end;
+		pid_t pid;
+
+		pid = strtol(dirent.d_name, &end, 10);
+		if (*end) /* only interested in proper numerical dirents */
+			continue;
+
+		pid_synthesize_comm_event(pid, 1);
+		pid_synthesize_mmap_samples(pid);
+	}
+
+	closedir(proc);
+}
+
+static int group_fd;
+
+static void create_counter(int counter, int cpu, pid_t pid)
+{
+	struct perf_counter_attr *attr = attrs + counter;
+	int track = 1;
+
+	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+	if (freq) {
+		attr->sample_type	|= PERF_SAMPLE_PERIOD;
+		attr->freq		= 1;
+		attr->sample_freq	= freq;
+	}
+	attr->mmap		= track;
+	attr->comm		= track;
+	attr->inherit		= (cpu < 0) && inherit;
+	attr->disabled		= 1;
+
+	track = 0; /* only the first counter needs these */
+
+try_again:
+	fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0);
+
+	if (fd[nr_cpu][counter] < 0) {
+		int err = errno;
+
+		if (err == EPERM)
+			die("Permission error - are you root?\n");
+
+		/*
+		 * If it's cycles then fall back to hrtimer
+		 * based cpu-clock-tick sw counter, which
+		 * is always available even if no PMU support:
+		 */
+		if (attr->type == PERF_TYPE_HARDWARE
+			&& attr->config == PERF_COUNT_HW_CPU_CYCLES) {
+
+			if (verbose)
+				warning(" ... trying to fall back to cpu-clock-ticks\n");
+			attr->type = PERF_TYPE_SOFTWARE;
+			attr->config = PERF_COUNT_SW_CPU_CLOCK;
+			goto try_again;
+		}
+		printf("\n");
+		error("perfcounter syscall returned with %d (%s)\n",
+			fd[nr_cpu][counter], strerror(err));
+		die("No CONFIG_PERF_COUNTERS=y kernel support configured?\n");
+		exit(-1);
+	}
+
+	assert(fd[nr_cpu][counter] >= 0);
+	fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK);
+
+	/*
+	 * First counter acts as the group leader:
+	 */
+	if (group && group_fd == -1)
+		group_fd = fd[nr_cpu][counter];
+
+	event_array[nr_poll].fd = fd[nr_cpu][counter];
+	event_array[nr_poll].events = POLLIN;
+	nr_poll++;
+
+	mmap_array[nr_cpu][counter].counter = counter;
+	mmap_array[nr_cpu][counter].prev = 0;
+	mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1;
+	mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size,
+			PROT_READ, MAP_SHARED, fd[nr_cpu][counter], 0);
+	if (mmap_array[nr_cpu][counter].base == MAP_FAILED) {
+		error("failed to mmap with %d (%s)\n", errno, strerror(errno));
+		exit(-1);
+	}
+
+	ioctl(fd[nr_cpu][counter], PERF_COUNTER_IOC_ENABLE);
+}
+
+static void open_counters(int cpu, pid_t pid)
+{
+	int counter;
+
+	if (pid > 0) {
+		pid_synthesize_comm_event(pid, 0);
+		pid_synthesize_mmap_samples(pid);
+	}
+
+	group_fd = -1;
+	for (counter = 0; counter < nr_counters; counter++)
+		create_counter(counter, cpu, pid);
+
+	nr_cpu++;
+}
+
+static int __cmd_record(int argc, const char **argv)
+{
+	int i, counter;
+	struct stat st;
+	pid_t pid;
+	int flags;
+	int ret;
+
+	page_size = sysconf(_SC_PAGE_SIZE);
+	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
+	assert(nr_cpus <= MAX_NR_CPUS);
+	assert(nr_cpus >= 0);
+
+	if (!stat(output_name, &st) && !force && !append_file) {
+		fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
+				output_name);
+		exit(-1);
+	}
+
+	flags = O_CREAT|O_RDWR;
+	if (append_file)
+		flags |= O_APPEND;
+	else
+		flags |= O_TRUNC;
+
+	output = open(output_name, flags, S_IRUSR|S_IWUSR);
+	if (output < 0) {
+		perror("failed to create output file");
+		exit(-1);
+	}
+
+	if (!system_wide) {
+		open_counters(-1, target_pid != -1 ? target_pid : getpid());
+	} else for (i = 0; i < nr_cpus; i++)
+		open_counters(i, target_pid);
+
+	atexit(sig_atexit);
+	signal(SIGCHLD, sig_handler);
+	signal(SIGINT, sig_handler);
+
+	if (target_pid == -1 && argc) {
+		pid = fork();
+		if (pid < 0)
+			perror("failed to fork");
+
+		if (!pid) {
+			if (execvp(argv[0], (char **)argv)) {
+				perror(argv[0]);
+				exit(-1);
+			}
+		}
+	}
+
+	if (realtime_prio) {
+		struct sched_param param;
+
+		param.sched_priority = realtime_prio;
+		if (sched_setscheduler(0, SCHED_FIFO, &param)) {
+			printf("Could not set realtime priority.\n");
+			exit(-1);
+		}
+	}
+
+	if (system_wide)
+		synthesize_samples();
+
+	while (!done) {
+		int hits = samples;
+
+		for (i = 0; i < nr_cpu; i++) {
+			for (counter = 0; counter < nr_counters; counter++)
+				mmap_read(&mmap_array[i][counter]);
+		}
+
+		if (hits == samples)
+			ret = poll(event_array, nr_poll, 100);
+	}
+
+	/*
+	 * Approximate RIP event size: 24 bytes.
+	 */
+	fprintf(stderr,
+		"[ perf record: Captured and wrote %.3f MB %s (~%lld samples) ]\n",
+		(double)bytes_written / 1024.0 / 1024.0,
+		output_name,
+		bytes_written / 24);
+
+	return 0;
+}
+
+static const char * const record_usage[] = {
+	"perf record [<options>] [<command>]",
+	"perf record [<options>] -- <command> [<options>]",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_CALLBACK('e', "event", NULL, "event",
+		     "event selector. use 'perf list' to list available events",
+		     parse_events),
+	OPT_INTEGER('p', "pid", &target_pid,
+		    "record events on existing pid"),
+	OPT_INTEGER('r', "realtime", &realtime_prio,
+		    "collect data with this RT SCHED_FIFO priority"),
+	OPT_BOOLEAN('a', "all-cpus", &system_wide,
+			    "system-wide collection from all CPUs"),
+	OPT_BOOLEAN('A', "append", &append_file,
+			    "append to the output file to do incremental profiling"),
+	OPT_BOOLEAN('f', "force", &force,
+			"overwrite existing data file"),
+	OPT_LONG('c', "count", &default_interval,
+		    "event period to sample"),
+	OPT_STRING('o', "output", &output_name, "file",
+		    "output file name"),
+	OPT_BOOLEAN('i', "inherit", &inherit,
+		    "child tasks inherit counters"),
+	OPT_INTEGER('F', "freq", &freq,
+		    "profile at this frequency"),
+	OPT_INTEGER('m', "mmap-pages", &mmap_pages,
+		    "number of mmap data pages"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show counter open errors, etc)"),
+	OPT_END()
+};
+
+int cmd_record(int argc, const char **argv, const char *prefix)
+{
+	int counter;
+
+	argc = parse_options(argc, argv, options, record_usage, 0);
+	if (!argc && target_pid == -1 && !system_wide)
+		usage_with_options(record_usage, options);
+
+	if (!nr_counters) {
+		nr_counters	= 1;
+		attrs[0].type	= PERF_TYPE_HARDWARE;
+		attrs[0].config = PERF_COUNT_HW_CPU_CYCLES;
+	}
+
+	for (counter = 0; counter < nr_counters; counter++) {
+		if (attrs[counter].sample_period)
+			continue;
+
+		attrs[counter].sample_period = default_interval;
+	}
+
+	return __cmd_record(argc, argv);
+}
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
new file mode 100644
index 00000000000..82fa93b4db9
--- /dev/null
+++ b/tools/perf/builtin-report.c
@@ -0,0 +1,1316 @@
+/*
+ * builtin-report.c
+ *
+ * Builtin report command: Analyze the perf.data input file,
+ * look up and read DSOs and symbol information and display
+ * a histogram of results, along various sorting keys.
+ */
+#include "builtin.h"
+
+#include "util/util.h"
+
+#include "util/color.h"
+#include "util/list.h"
+#include "util/cache.h"
+#include "util/rbtree.h"
+#include "util/symbol.h"
+#include "util/string.h"
+
+#include "perf.h"
+
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+
+#define SHOW_KERNEL	1
+#define SHOW_USER	2
+#define SHOW_HV		4
+
+static char		const *input_name = "perf.data";
+static char		*vmlinux = NULL;
+
+static char		default_sort_order[] = "comm,dso";
+static char		*sort_order = default_sort_order;
+
+static int		input;
+static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
+
+static int		dump_trace = 0;
+#define dprintf(x...)	do { if (dump_trace) printf(x); } while (0)
+
+static int		verbose;
+static int		full_paths;
+
+static unsigned long	page_size;
+static unsigned long	mmap_window = 32;
+
+struct ip_event {
+	struct perf_event_header header;
+	__u64 ip;
+	__u32 pid, tid;
+	__u64 period;
+};
+
+struct mmap_event {
+	struct perf_event_header header;
+	__u32 pid, tid;
+	__u64 start;
+	__u64 len;
+	__u64 pgoff;
+	char filename[PATH_MAX];
+};
+
+struct comm_event {
+	struct perf_event_header header;
+	__u32 pid, tid;
+	char comm[16];
+};
+
+struct fork_event {
+	struct perf_event_header header;
+	__u32 pid, ppid;
+};
+
+struct period_event {
+	struct perf_event_header header;
+	__u64 time;
+	__u64 id;
+	__u64 sample_period;
+};
+
+typedef union event_union {
+	struct perf_event_header	header;
+	struct ip_event			ip;
+	struct mmap_event		mmap;
+	struct comm_event		comm;
+	struct fork_event		fork;
+	struct period_event		period;
+} event_t;
+
+static LIST_HEAD(dsos);
+static struct dso *kernel_dso;
+static struct dso *vdso;
+
+static void dsos__add(struct dso *dso)
+{
+	list_add_tail(&dso->node, &dsos);
+}
+
+static struct dso *dsos__find(const char *name)
+{
+	struct dso *pos;
+
+	list_for_each_entry(pos, &dsos, node)
+		if (strcmp(pos->name, name) == 0)
+			return pos;
+	return NULL;
+}
+
+static struct dso *dsos__findnew(const char *name)
+{
+	struct dso *dso = dsos__find(name);
+	int nr;
+
+	if (dso)
+		return dso;
+
+	dso = dso__new(name, 0);
+	if (!dso)
+		goto out_delete_dso;
+
+	nr = dso__load(dso, NULL, verbose);
+	if (nr < 0) {
+		if (verbose)
+			fprintf(stderr, "Failed to open: %s\n", name);
+		goto out_delete_dso;
+	}
+	if (!nr && verbose) {
+		fprintf(stderr,
+		"No symbols found in: %s, maybe install a debug package?\n",
+				name);
+	}
+
+	dsos__add(dso);
+
+	return dso;
+
+out_delete_dso:
+	dso__delete(dso);
+	return NULL;
+}
+
+static void dsos__fprintf(FILE *fp)
+{
+	struct dso *pos;
+
+	list_for_each_entry(pos, &dsos, node)
+		dso__fprintf(pos, fp);
+}
+
+static struct symbol *vdso__find_symbol(struct dso *dso, __u64 ip)
+{
+	return dso__find_symbol(kernel_dso, ip);
+}
+
+static int load_kernel(void)
+{
+	int err;
+
+	kernel_dso = dso__new("[kernel]", 0);
+	if (!kernel_dso)
+		return -1;
+
+	err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
+	if (err) {
+		dso__delete(kernel_dso);
+		kernel_dso = NULL;
+	} else
+		dsos__add(kernel_dso);
+
+	vdso = dso__new("[vdso]", 0);
+	if (!vdso)
+		return -1;
+
+	vdso->find_symbol = vdso__find_symbol;
+
+	dsos__add(vdso);
+
+	return err;
+}
+
+static char __cwd[PATH_MAX];
+static char *cwd = __cwd;
+static int cwdlen;
+
+static int strcommon(const char *pathname)
+{
+	int n = 0;
+
+	while (pathname[n] == cwd[n] && n < cwdlen)
+		++n;
+
+	return n;
+}
+
+struct map {
+	struct list_head node;
+	__u64	 start;
+	__u64	 end;
+	__u64	 pgoff;
+	__u64	 (*map_ip)(struct map *, __u64);
+	struct dso	 *dso;
+};
+
+static __u64 map__map_ip(struct map *map, __u64 ip)
+{
+	return ip - map->start + map->pgoff;
+}
+
+static __u64 vdso__map_ip(struct map *map, __u64 ip)
+{
+	return ip;
+}
+
+static inline int is_anon_memory(const char *filename)
+{
+     return strcmp(filename, "//anon") == 0;
+}
+
+static struct map *map__new(struct mmap_event *event)
+{
+	struct map *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		const char *filename = event->filename;
+		char newfilename[PATH_MAX];
+		int anon;
+
+		if (cwd) {
+			int n = strcommon(filename);
+
+			if (n == cwdlen) {
+				snprintf(newfilename, sizeof(newfilename),
+					 ".%s", filename + n);
+				filename = newfilename;
+			}
+		}
+
+		anon = is_anon_memory(filename);
+
+		if (anon) {
+			snprintf(newfilename, sizeof(newfilename), "/tmp/perf-%d.map", event->pid);
+			filename = newfilename;
+		}
+
+		self->start = event->start;
+		self->end   = event->start + event->len;
+		self->pgoff = event->pgoff;
+
+		self->dso = dsos__findnew(filename);
+		if (self->dso == NULL)
+			goto out_delete;
+
+		if (self->dso == vdso || anon)
+			self->map_ip = vdso__map_ip;
+		else
+			self->map_ip = map__map_ip;
+	}
+	return self;
+out_delete:
+	free(self);
+	return NULL;
+}
+
+static struct map *map__clone(struct map *self)
+{
+	struct map *map = malloc(sizeof(*self));
+
+	if (!map)
+		return NULL;
+
+	memcpy(map, self, sizeof(*self));
+
+	return map;
+}
+
+static int map__overlap(struct map *l, struct map *r)
+{
+	if (l->start > r->start) {
+		struct map *t = l;
+		l = r;
+		r = t;
+	}
+
+	if (l->end > r->start)
+		return 1;
+
+	return 0;
+}
+
+static size_t map__fprintf(struct map *self, FILE *fp)
+{
+	return fprintf(fp, " %Lx-%Lx %Lx %s\n",
+		       self->start, self->end, self->pgoff, self->dso->name);
+}
+
+
+struct thread {
+	struct rb_node	 rb_node;
+	struct list_head maps;
+	pid_t		 pid;
+	char		 *comm;
+};
+
+static struct thread *thread__new(pid_t pid)
+{
+	struct thread *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		self->pid = pid;
+		self->comm = malloc(32);
+		if (self->comm)
+			snprintf(self->comm, 32, ":%d", self->pid);
+		INIT_LIST_HEAD(&self->maps);
+	}
+
+	return self;
+}
+
+static int thread__set_comm(struct thread *self, const char *comm)
+{
+	if (self->comm)
+		free(self->comm);
+	self->comm = strdup(comm);
+	return self->comm ? 0 : -ENOMEM;
+}
+
+static size_t thread__fprintf(struct thread *self, FILE *fp)
+{
+	struct map *pos;
+	size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
+
+	list_for_each_entry(pos, &self->maps, node)
+		ret += map__fprintf(pos, fp);
+
+	return ret;
+}
+
+
+static struct rb_root threads;
+static struct thread *last_match;
+
+static struct thread *threads__findnew(pid_t pid)
+{
+	struct rb_node **p = &threads.rb_node;
+	struct rb_node *parent = NULL;
+	struct thread *th;
+
+	/*
+	 * Font-end cache - PID lookups come in blocks,
+	 * so most of the time we dont have to look up
+	 * the full rbtree:
+	 */
+	if (last_match && last_match->pid == pid)
+		return last_match;
+
+	while (*p != NULL) {
+		parent = *p;
+		th = rb_entry(parent, struct thread, rb_node);
+
+		if (th->pid == pid) {
+			last_match = th;
+			return th;
+		}
+
+		if (pid < th->pid)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	th = thread__new(pid);
+	if (th != NULL) {
+		rb_link_node(&th->rb_node, parent, p);
+		rb_insert_color(&th->rb_node, &threads);
+		last_match = th;
+	}
+
+	return th;
+}
+
+static void thread__insert_map(struct thread *self, struct map *map)
+{
+	struct map *pos, *tmp;
+
+	list_for_each_entry_safe(pos, tmp, &self->maps, node) {
+		if (map__overlap(pos, map)) {
+			list_del_init(&pos->node);
+			/* XXX leaks dsos */
+			free(pos);
+		}
+	}
+
+	list_add_tail(&map->node, &self->maps);
+}
+
+static int thread__fork(struct thread *self, struct thread *parent)
+{
+	struct map *map;
+
+	if (self->comm)
+		free(self->comm);
+	self->comm = strdup(parent->comm);
+	if (!self->comm)
+		return -ENOMEM;
+
+	list_for_each_entry(map, &parent->maps, node) {
+		struct map *new = map__clone(map);
+		if (!new)
+			return -ENOMEM;
+		thread__insert_map(self, new);
+	}
+
+	return 0;
+}
+
+static struct map *thread__find_map(struct thread *self, __u64 ip)
+{
+	struct map *pos;
+
+	if (self == NULL)
+		return NULL;
+
+	list_for_each_entry(pos, &self->maps, node)
+		if (ip >= pos->start && ip <= pos->end)
+			return pos;
+
+	return NULL;
+}
+
+static size_t threads__fprintf(FILE *fp)
+{
+	size_t ret = 0;
+	struct rb_node *nd;
+
+	for (nd = rb_first(&threads); nd; nd = rb_next(nd)) {
+		struct thread *pos = rb_entry(nd, struct thread, rb_node);
+
+		ret += thread__fprintf(pos, fp);
+	}
+
+	return ret;
+}
+
+/*
+ * histogram, sorted on item, collects counts
+ */
+
+static struct rb_root hist;
+
+struct hist_entry {
+	struct rb_node	 rb_node;
+
+	struct thread	 *thread;
+	struct map	 *map;
+	struct dso	 *dso;
+	struct symbol	 *sym;
+	__u64		 ip;
+	char		 level;
+
+	__u64		 count;
+};
+
+/*
+ * configurable sorting bits
+ */
+
+struct sort_entry {
+	struct list_head list;
+
+	char *header;
+
+	int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
+	int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
+	size_t	(*print)(FILE *fp, struct hist_entry *);
+};
+
+/* --sort pid */
+
+static int64_t
+sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+static size_t
+sort__thread_print(FILE *fp, struct hist_entry *self)
+{
+	return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
+}
+
+static struct sort_entry sort_thread = {
+	.header = "         Command:  Pid",
+	.cmp	= sort__thread_cmp,
+	.print	= sort__thread_print,
+};
+
+/* --sort comm */
+
+static int64_t
+sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+static int64_t
+sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	char *comm_l = left->thread->comm;
+	char *comm_r = right->thread->comm;
+
+	if (!comm_l || !comm_r) {
+		if (!comm_l && !comm_r)
+			return 0;
+		else if (!comm_l)
+			return -1;
+		else
+			return 1;
+	}
+
+	return strcmp(comm_l, comm_r);
+}
+
+static size_t
+sort__comm_print(FILE *fp, struct hist_entry *self)
+{
+	return fprintf(fp, "%16s", self->thread->comm);
+}
+
+static struct sort_entry sort_comm = {
+	.header		= "         Command",
+	.cmp		= sort__comm_cmp,
+	.collapse	= sort__comm_collapse,
+	.print		= sort__comm_print,
+};
+
+/* --sort dso */
+
+static int64_t
+sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct dso *dso_l = left->dso;
+	struct dso *dso_r = right->dso;
+
+	if (!dso_l || !dso_r) {
+		if (!dso_l && !dso_r)
+			return 0;
+		else if (!dso_l)
+			return -1;
+		else
+			return 1;
+	}
+
+	return strcmp(dso_l->name, dso_r->name);
+}
+
+static size_t
+sort__dso_print(FILE *fp, struct hist_entry *self)
+{
+	if (self->dso)
+		return fprintf(fp, "%-25s", self->dso->name);
+
+	return fprintf(fp, "%016llx         ", (__u64)self->ip);
+}
+
+static struct sort_entry sort_dso = {
+	.header = "Shared Object            ",
+	.cmp	= sort__dso_cmp,
+	.print	= sort__dso_print,
+};
+
+/* --sort symbol */
+
+static int64_t
+sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	__u64 ip_l, ip_r;
+
+	if (left->sym == right->sym)
+		return 0;
+
+	ip_l = left->sym ? left->sym->start : left->ip;
+	ip_r = right->sym ? right->sym->start : right->ip;
+
+	return (int64_t)(ip_r - ip_l);
+}
+
+static size_t
+sort__sym_print(FILE *fp, struct hist_entry *self)
+{
+	size_t ret = 0;
+
+	if (verbose)
+		ret += fprintf(fp, "%#018llx  ", (__u64)self->ip);
+
+	if (self->sym) {
+		ret += fprintf(fp, "[%c] %s",
+			self->dso == kernel_dso ? 'k' : '.', self->sym->name);
+	} else {
+		ret += fprintf(fp, "%#016llx", (__u64)self->ip);
+	}
+
+	return ret;
+}
+
+static struct sort_entry sort_sym = {
+	.header = "Symbol",
+	.cmp	= sort__sym_cmp,
+	.print	= sort__sym_print,
+};
+
+static int sort__need_collapse = 0;
+
+struct sort_dimension {
+	char			*name;
+	struct sort_entry	*entry;
+	int			taken;
+};
+
+static struct sort_dimension sort_dimensions[] = {
+	{ .name = "pid",	.entry = &sort_thread,	},
+	{ .name = "comm",	.entry = &sort_comm,	},
+	{ .name = "dso",	.entry = &sort_dso,	},
+	{ .name = "symbol",	.entry = &sort_sym,	},
+};
+
+static LIST_HEAD(hist_entry__sort_list);
+
+static int sort_dimension__add(char *tok)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
+		struct sort_dimension *sd = &sort_dimensions[i];
+
+		if (sd->taken)
+			continue;
+
+		if (strncasecmp(tok, sd->name, strlen(tok)))
+			continue;
+
+		if (sd->entry->collapse)
+			sort__need_collapse = 1;
+
+		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
+		sd->taken = 1;
+
+		return 0;
+	}
+
+	return -ESRCH;
+}
+
+static int64_t
+hist_entry__cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct sort_entry *se;
+	int64_t cmp = 0;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		cmp = se->cmp(left, right);
+		if (cmp)
+			break;
+	}
+
+	return cmp;
+}
+
+static int64_t
+hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	struct sort_entry *se;
+	int64_t cmp = 0;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		int64_t (*f)(struct hist_entry *, struct hist_entry *);
+
+		f = se->collapse ?: se->cmp;
+
+		cmp = f(left, right);
+		if (cmp)
+			break;
+	}
+
+	return cmp;
+}
+
+static size_t
+hist_entry__fprintf(FILE *fp, struct hist_entry *self, __u64 total_samples)
+{
+	struct sort_entry *se;
+	size_t ret;
+
+	if (total_samples) {
+		double percent = self->count * 100.0 / total_samples;
+		char *color = PERF_COLOR_NORMAL;
+
+		/*
+		 * We color high-overhead entries in red, mid-overhead
+		 * entries in green - and keep the low overhead places
+		 * normal:
+		 */
+		if (percent >= 5.0) {
+			color = PERF_COLOR_RED;
+		} else {
+			if (percent >= 0.5)
+				color = PERF_COLOR_GREEN;
+		}
+
+		ret = color_fprintf(fp, color, "   %6.2f%%",
+				(self->count * 100.0) / total_samples);
+	} else
+		ret = fprintf(fp, "%12Ld ", self->count);
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		fprintf(fp, "  ");
+		ret += se->print(fp, self);
+	}
+
+	ret += fprintf(fp, "\n");
+
+	return ret;
+}
+
+/*
+ * collect histogram counts
+ */
+
+static int
+hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
+		struct symbol *sym, __u64 ip, char level, __u64 count)
+{
+	struct rb_node **p = &hist.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *he;
+	struct hist_entry entry = {
+		.thread	= thread,
+		.map	= map,
+		.dso	= dso,
+		.sym	= sym,
+		.ip	= ip,
+		.level	= level,
+		.count	= count,
+	};
+	int cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		he = rb_entry(parent, struct hist_entry, rb_node);
+
+		cmp = hist_entry__cmp(&entry, he);
+
+		if (!cmp) {
+			he->count += count;
+			return 0;
+		}
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	he = malloc(sizeof(*he));
+	if (!he)
+		return -ENOMEM;
+	*he = entry;
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &hist);
+
+	return 0;
+}
+
+static void hist_entry__free(struct hist_entry *he)
+{
+	free(he);
+}
+
+/*
+ * collapse the histogram
+ */
+
+static struct rb_root collapse_hists;
+
+static void collapse__insert_entry(struct hist_entry *he)
+{
+	struct rb_node **p = &collapse_hists.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *iter;
+	int64_t cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct hist_entry, rb_node);
+
+		cmp = hist_entry__collapse(iter, he);
+
+		if (!cmp) {
+			iter->count += he->count;
+			hist_entry__free(he);
+			return;
+		}
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &collapse_hists);
+}
+
+static void collapse__resort(void)
+{
+	struct rb_node *next;
+	struct hist_entry *n;
+
+	if (!sort__need_collapse)
+		return;
+
+	next = rb_first(&hist);
+	while (next) {
+		n = rb_entry(next, struct hist_entry, rb_node);
+		next = rb_next(&n->rb_node);
+
+		rb_erase(&n->rb_node, &hist);
+		collapse__insert_entry(n);
+	}
+}
+
+/*
+ * reverse the map, sort on count.
+ */
+
+static struct rb_root output_hists;
+
+static void output__insert_entry(struct hist_entry *he)
+{
+	struct rb_node **p = &output_hists.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *iter;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct hist_entry, rb_node);
+
+		if (he->count > iter->count)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &output_hists);
+}
+
+static void output__resort(void)
+{
+	struct rb_node *next;
+	struct hist_entry *n;
+	struct rb_root *tree = &hist;
+
+	if (sort__need_collapse)
+		tree = &collapse_hists;
+
+	next = rb_first(tree);
+
+	while (next) {
+		n = rb_entry(next, struct hist_entry, rb_node);
+		next = rb_next(&n->rb_node);
+
+		rb_erase(&n->rb_node, tree);
+		output__insert_entry(n);
+	}
+}
+
+static size_t output__fprintf(FILE *fp, __u64 total_samples)
+{
+	struct hist_entry *pos;
+	struct sort_entry *se;
+	struct rb_node *nd;
+	size_t ret = 0;
+
+	fprintf(fp, "\n");
+	fprintf(fp, "#\n");
+	fprintf(fp, "# (%Ld samples)\n", (__u64)total_samples);
+	fprintf(fp, "#\n");
+
+	fprintf(fp, "# Overhead");
+	list_for_each_entry(se, &hist_entry__sort_list, list)
+		fprintf(fp, "  %s", se->header);
+	fprintf(fp, "\n");
+
+	fprintf(fp, "# ........");
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		int i;
+
+		fprintf(fp, "  ");
+		for (i = 0; i < strlen(se->header); i++)
+			fprintf(fp, ".");
+	}
+	fprintf(fp, "\n");
+
+	fprintf(fp, "#\n");
+
+	for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) {
+		pos = rb_entry(nd, struct hist_entry, rb_node);
+		ret += hist_entry__fprintf(fp, pos, total_samples);
+	}
+
+	if (!strcmp(sort_order, default_sort_order)) {
+		fprintf(fp, "#\n");
+		fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n");
+		fprintf(fp, "#\n");
+	}
+	fprintf(fp, "\n");
+
+	return ret;
+}
+
+static void register_idle_thread(void)
+{
+	struct thread *thread = threads__findnew(0);
+
+	if (thread == NULL ||
+			thread__set_comm(thread, "[idle]")) {
+		fprintf(stderr, "problem inserting idle task.\n");
+		exit(-1);
+	}
+}
+
+static unsigned long total = 0,
+		     total_mmap = 0,
+		     total_comm = 0,
+		     total_fork = 0,
+		     total_unknown = 0;
+
+static int
+process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	char level;
+	int show = 0;
+	struct dso *dso = NULL;
+	struct thread *thread = threads__findnew(event->ip.pid);
+	__u64 ip = event->ip.ip;
+	__u64 period = 1;
+	struct map *map = NULL;
+
+	if (event->header.type & PERF_SAMPLE_PERIOD)
+		period = event->ip.period;
+
+	dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->header.misc,
+		event->ip.pid,
+		(void *)(long)ip,
+		(long long)period);
+
+	dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
+	if (thread == NULL) {
+		fprintf(stderr, "problem processing %d event, skipping it.\n",
+			event->header.type);
+		return -1;
+	}
+
+	if (event->header.misc & PERF_EVENT_MISC_KERNEL) {
+		show = SHOW_KERNEL;
+		level = 'k';
+
+		dso = kernel_dso;
+
+		dprintf(" ...... dso: %s\n", dso->name);
+
+	} else if (event->header.misc & PERF_EVENT_MISC_USER) {
+
+		show = SHOW_USER;
+		level = '.';
+
+		map = thread__find_map(thread, ip);
+		if (map != NULL) {
+			ip = map->map_ip(map, ip);
+			dso = map->dso;
+		} else {
+			/*
+			 * If this is outside of all known maps,
+			 * and is a negative address, try to look it
+			 * up in the kernel dso, as it might be a
+			 * vsyscall (which executes in user-mode):
+			 */
+			if ((long long)ip < 0)
+				dso = kernel_dso;
+		}
+		dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+
+	} else {
+		show = SHOW_HV;
+		level = 'H';
+		dprintf(" ...... dso: [hypervisor]\n");
+	}
+
+	if (show & show_mask) {
+		struct symbol *sym = NULL;
+
+		if (dso)
+			sym = dso->find_symbol(dso, ip);
+
+		if (hist_entry__add(thread, map, dso, sym, ip, level, period)) {
+			fprintf(stderr,
+		"problem incrementing symbol count, skipping event\n");
+			return -1;
+		}
+	}
+	total += period;
+
+	return 0;
+}
+
+static int
+process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread = threads__findnew(event->mmap.pid);
+	struct map *map = map__new(&event->mmap);
+
+	dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->mmap.pid,
+		(void *)(long)event->mmap.start,
+		(void *)(long)event->mmap.len,
+		(void *)(long)event->mmap.pgoff,
+		event->mmap.filename);
+
+	if (thread == NULL || map == NULL) {
+		dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n");
+		return 0;
+	}
+
+	thread__insert_map(thread, map);
+	total_mmap++;
+
+	return 0;
+}
+
+static int
+process_comm_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread = threads__findnew(event->comm.pid);
+
+	dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->comm.comm, event->comm.pid);
+
+	if (thread == NULL ||
+	    thread__set_comm(thread, event->comm.comm)) {
+		dprintf("problem processing PERF_EVENT_COMM, skipping event.\n");
+		return -1;
+	}
+	total_comm++;
+
+	return 0;
+}
+
+static int
+process_fork_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread = threads__findnew(event->fork.pid);
+	struct thread *parent = threads__findnew(event->fork.ppid);
+
+	dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->fork.pid, event->fork.ppid);
+
+	if (!thread || !parent || thread__fork(thread, parent)) {
+		dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
+		return -1;
+	}
+	total_fork++;
+
+	return 0;
+}
+
+static int
+process_period_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->period.time,
+		event->period.id,
+		event->period.sample_period);
+
+	return 0;
+}
+
+static int
+process_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
+		return process_overflow_event(event, offset, head);
+
+	switch (event->header.type) {
+	case PERF_EVENT_MMAP:
+		return process_mmap_event(event, offset, head);
+
+	case PERF_EVENT_COMM:
+		return process_comm_event(event, offset, head);
+
+	case PERF_EVENT_FORK:
+		return process_fork_event(event, offset, head);
+
+	case PERF_EVENT_PERIOD:
+		return process_period_event(event, offset, head);
+	/*
+	 * We dont process them right now but they are fine:
+	 */
+
+	case PERF_EVENT_THROTTLE:
+	case PERF_EVENT_UNTHROTTLE:
+		return 0;
+
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static int __cmd_report(void)
+{
+	int ret, rc = EXIT_FAILURE;
+	unsigned long offset = 0;
+	unsigned long head = 0;
+	struct stat stat;
+	event_t *event;
+	uint32_t size;
+	char *buf;
+
+	register_idle_thread();
+
+	input = open(input_name, O_RDONLY);
+	if (input < 0) {
+		fprintf(stderr, " failed to open file: %s", input_name);
+		if (!strcmp(input_name, "perf.data"))
+			fprintf(stderr, "  (try 'perf record' first)");
+		fprintf(stderr, "\n");
+		exit(-1);
+	}
+
+	ret = fstat(input, &stat);
+	if (ret < 0) {
+		perror("failed to stat file");
+		exit(-1);
+	}
+
+	if (!stat.st_size) {
+		fprintf(stderr, "zero-sized file, nothing to do!\n");
+		exit(0);
+	}
+
+	if (load_kernel() < 0) {
+		perror("failed to load kernel symbols");
+		return EXIT_FAILURE;
+	}
+
+	if (!full_paths) {
+		if (getcwd(__cwd, sizeof(__cwd)) == NULL) {
+			perror("failed to get the current directory");
+			return EXIT_FAILURE;
+		}
+		cwdlen = strlen(cwd);
+	} else {
+		cwd = NULL;
+		cwdlen = 0;
+	}
+remap:
+	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
+			   MAP_SHARED, input, offset);
+	if (buf == MAP_FAILED) {
+		perror("failed to mmap file");
+		exit(-1);
+	}
+
+more:
+	event = (event_t *)(buf + head);
+
+	size = event->header.size;
+	if (!size)
+		size = 8;
+
+	if (head + event->header.size >= page_size * mmap_window) {
+		unsigned long shift = page_size * (head / page_size);
+		int ret;
+
+		ret = munmap(buf, page_size * mmap_window);
+		assert(ret == 0);
+
+		offset += shift;
+		head -= shift;
+		goto remap;
+	}
+
+	size = event->header.size;
+
+	dprintf("%p [%p]: event: %d\n",
+			(void *)(offset + head),
+			(void *)(long)event->header.size,
+			event->header.type);
+
+	if (!size || process_event(event, offset, head) < 0) {
+
+		dprintf("%p [%p]: skipping unknown header type: %d\n",
+			(void *)(offset + head),
+			(void *)(long)(event->header.size),
+			event->header.type);
+
+		total_unknown++;
+
+		/*
+		 * assume we lost track of the stream, check alignment, and
+		 * increment a single u64 in the hope to catch on again 'soon'.
+		 */
+
+		if (unlikely(head & 7))
+			head &= ~7ULL;
+
+		size = 8;
+	}
+
+	head += size;
+
+	if (offset + head < stat.st_size)
+		goto more;
+
+	rc = EXIT_SUCCESS;
+	close(input);
+
+	dprintf("      IP events: %10ld\n", total);
+	dprintf("    mmap events: %10ld\n", total_mmap);
+	dprintf("    comm events: %10ld\n", total_comm);
+	dprintf("    fork events: %10ld\n", total_fork);
+	dprintf(" unknown events: %10ld\n", total_unknown);
+
+	if (dump_trace)
+		return 0;
+
+	if (verbose >= 3)
+		threads__fprintf(stdout);
+
+	if (verbose >= 2)
+		dsos__fprintf(stdout);
+
+	collapse__resort();
+	output__resort();
+	output__fprintf(stdout, total);
+
+	return rc;
+}
+
+static const char * const report_usage[] = {
+	"perf report [<options>] <command>",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_STRING('i', "input", &input_name, "file",
+		    "input file name"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+		    "dump raw trace in ASCII"),
+	OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+	OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
+		   "sort by key(s): pid, comm, dso, symbol. Default: pid,symbol"),
+	OPT_BOOLEAN('P', "full-paths", &full_paths,
+		    "Don't shorten the pathnames taking into account the cwd"),
+	OPT_END()
+};
+
+static void setup_sorting(void)
+{
+	char *tmp, *tok, *str = strdup(sort_order);
+
+	for (tok = strtok_r(str, ", ", &tmp);
+			tok; tok = strtok_r(NULL, ", ", &tmp)) {
+		if (sort_dimension__add(tok) < 0) {
+			error("Unknown --sort key: `%s'", tok);
+			usage_with_options(report_usage, options);
+		}
+	}
+
+	free(str);
+}
+
+int cmd_report(int argc, const char **argv, const char *prefix)
+{
+	symbol__init();
+
+	page_size = getpagesize();
+
+	argc = parse_options(argc, argv, options, report_usage, 0);
+
+	setup_sorting();
+
+	/*
+	 * Any (unrecognized) arguments left?
+	 */
+	if (argc)
+		usage_with_options(report_usage, options);
+
+	setup_pager();
+
+	return __cmd_report();
+}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
new file mode 100644
index 00000000000..c43e4a97dc4
--- /dev/null
+++ b/tools/perf/builtin-stat.c
@@ -0,0 +1,367 @@
+/*
+ * builtin-stat.c
+ *
+ * Builtin stat command: Give a precise performance counters summary
+ * overview about any workload, CPU or specific PID.
+ *
+ * Sample output:
+
+   $ perf stat ~/hackbench 10
+   Time: 0.104
+
+    Performance counter stats for '/home/mingo/hackbench':
+
+       1255.538611  task clock ticks     #      10.143 CPU utilization factor
+             54011  context switches     #       0.043 M/sec
+               385  CPU migrations       #       0.000 M/sec
+             17755  pagefaults           #       0.014 M/sec
+        3808323185  CPU cycles           #    3033.219 M/sec
+        1575111190  instructions         #    1254.530 M/sec
+          17367895  cache references     #      13.833 M/sec
+           7674421  cache misses         #       6.112 M/sec
+
+    Wall-clock time elapsed:   123.786620 msecs
+
+ *
+ * Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
+ *
+ * Improvements and fixes by:
+ *
+ *   Arjan van de Ven <arjan@linux.intel.com>
+ *   Yanmin Zhang <yanmin.zhang@intel.com>
+ *   Wu Fengguang <fengguang.wu@intel.com>
+ *   Mike Galbraith <efault@gmx.de>
+ *   Paul Mackerras <paulus@samba.org>
+ *
+ * Released under the GPL v2. (and only v2, not any later version)
+ */
+
+#include "perf.h"
+#include "builtin.h"
+#include "util/util.h"
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+
+#include <sys/prctl.h>
+
+static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
+
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS	},
+
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES	},
+
+};
+
+static int			system_wide			=  0;
+static int			inherit				=  1;
+static int			verbose				=  0;
+
+static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
+
+static int			target_pid			= -1;
+static int			nr_cpus				=  0;
+static unsigned int		page_size;
+
+static int			scale				=  1;
+
+static const unsigned int default_count[] = {
+	1000000,
+	1000000,
+	  10000,
+	  10000,
+	1000000,
+	  10000,
+};
+
+static __u64			event_res[MAX_COUNTERS][3];
+static __u64			event_scaled[MAX_COUNTERS];
+
+static __u64			runtime_nsecs;
+static __u64			walltime_nsecs;
+static __u64			runtime_cycles;
+
+static void create_perf_stat_counter(int counter)
+{
+	struct perf_counter_attr *attr = attrs + counter;
+
+	if (scale)
+		attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
+				    PERF_FORMAT_TOTAL_TIME_RUNNING;
+
+	if (system_wide) {
+		int cpu;
+		for (cpu = 0; cpu < nr_cpus; cpu ++) {
+			fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0);
+			if (fd[cpu][counter] < 0 && verbose) {
+				printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno));
+			}
+		}
+	} else {
+		attr->inherit	= inherit;
+		attr->disabled	= 1;
+
+		fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0);
+		if (fd[0][counter] < 0 && verbose) {
+			printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno));
+		}
+	}
+}
+
+/*
+ * Does the counter have nsecs as a unit?
+ */
+static inline int nsec_counter(int counter)
+{
+	if (attrs[counter].type != PERF_TYPE_SOFTWARE)
+		return 0;
+
+	if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK)
+		return 1;
+
+	if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * Read out the results of a single counter:
+ */
+static void read_counter(int counter)
+{
+	__u64 *count, single_count[3];
+	ssize_t res;
+	int cpu, nv;
+	int scaled;
+
+	count = event_res[counter];
+
+	count[0] = count[1] = count[2] = 0;
+
+	nv = scale ? 3 : 1;
+	for (cpu = 0; cpu < nr_cpus; cpu ++) {
+		if (fd[cpu][counter] < 0)
+			continue;
+
+		res = read(fd[cpu][counter], single_count, nv * sizeof(__u64));
+		assert(res == nv * sizeof(__u64));
+
+		count[0] += single_count[0];
+		if (scale) {
+			count[1] += single_count[1];
+			count[2] += single_count[2];
+		}
+	}
+
+	scaled = 0;
+	if (scale) {
+		if (count[2] == 0) {
+			event_scaled[counter] = -1;
+			count[0] = 0;
+			return;
+		}
+
+		if (count[2] < count[1]) {
+			event_scaled[counter] = 1;
+			count[0] = (unsigned long long)
+				((double)count[0] * count[1] / count[2] + 0.5);
+		}
+	}
+	/*
+	 * Save the full runtime - to allow normalization during printout:
+	 */
+	if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
+		attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+		runtime_nsecs = count[0];
+	if (attrs[counter].type == PERF_TYPE_HARDWARE &&
+		attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES)
+		runtime_cycles = count[0];
+}
+
+/*
+ * Print out the results of a single counter:
+ */
+static void print_counter(int counter)
+{
+	__u64 *count;
+	int scaled;
+
+	count = event_res[counter];
+	scaled = event_scaled[counter];
+
+	if (scaled == -1) {
+		fprintf(stderr, " %14s  %-20s\n",
+			"<not counted>", event_name(counter));
+		return;
+	}
+
+	if (nsec_counter(counter)) {
+		double msecs = (double)count[0] / 1000000;
+
+		fprintf(stderr, " %14.6f  %-20s",
+			msecs, event_name(counter));
+		if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
+			attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
+
+			if (walltime_nsecs)
+				fprintf(stderr, " # %11.3f CPU utilization factor",
+					(double)count[0] / (double)walltime_nsecs);
+		}
+	} else {
+		fprintf(stderr, " %14Ld  %-20s",
+			count[0], event_name(counter));
+		if (runtime_nsecs)
+			fprintf(stderr, " # %11.3f M/sec",
+				(double)count[0]/runtime_nsecs*1000.0);
+		if (runtime_cycles &&
+			attrs[counter].type == PERF_TYPE_HARDWARE &&
+				attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
+
+			fprintf(stderr, " # %1.3f per cycle",
+				(double)count[0] / (double)runtime_cycles);
+		}
+	}
+	if (scaled)
+		fprintf(stderr, "  (scaled from %.2f%%)",
+			(double) count[2] / count[1] * 100);
+	fprintf(stderr, "\n");
+}
+
+static int do_perf_stat(int argc, const char **argv)
+{
+	unsigned long long t0, t1;
+	int counter;
+	int status;
+	int pid;
+	int i;
+
+	if (!system_wide)
+		nr_cpus = 1;
+
+	for (counter = 0; counter < nr_counters; counter++)
+		create_perf_stat_counter(counter);
+
+	/*
+	 * Enable counters and exec the command:
+	 */
+	t0 = rdclock();
+	prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+
+	if ((pid = fork()) < 0)
+		perror("failed to fork");
+
+	if (!pid) {
+		if (execvp(argv[0], (char **)argv)) {
+			perror(argv[0]);
+			exit(-1);
+		}
+	}
+
+	while (wait(&status) >= 0)
+		;
+
+	prctl(PR_TASK_PERF_COUNTERS_DISABLE);
+	t1 = rdclock();
+
+	walltime_nsecs = t1 - t0;
+
+	fflush(stdout);
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, " Performance counter stats for \'%s", argv[0]);
+
+	for (i = 1; i < argc; i++)
+		fprintf(stderr, " %s", argv[i]);
+
+	fprintf(stderr, "\':\n");
+	fprintf(stderr, "\n");
+
+	for (counter = 0; counter < nr_counters; counter++)
+		read_counter(counter);
+
+	for (counter = 0; counter < nr_counters; counter++)
+		print_counter(counter);
+
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, " Wall-clock time elapsed: %12.6f msecs\n",
+			(double)(t1-t0)/1e6);
+	fprintf(stderr, "\n");
+
+	return 0;
+}
+
+static volatile int signr = -1;
+
+static void skip_signal(int signo)
+{
+	signr = signo;
+}
+
+static void sig_atexit(void)
+{
+	if (signr == -1)
+		return;
+
+	signal(signr, SIG_DFL);
+	kill(getpid(), signr);
+}
+
+static const char * const stat_usage[] = {
+	"perf stat [<options>] <command>",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_CALLBACK('e', "event", NULL, "event",
+		     "event selector. use 'perf list' to list available events",
+		     parse_events),
+	OPT_BOOLEAN('i', "inherit", &inherit,
+		    "child tasks inherit counters"),
+	OPT_INTEGER('p', "pid", &target_pid,
+		    "stat events on existing pid"),
+	OPT_BOOLEAN('a', "all-cpus", &system_wide,
+			    "system-wide collection from all CPUs"),
+	OPT_BOOLEAN('S', "scale", &scale,
+			    "scale/normalize counters"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show counter open errors, etc)"),
+	OPT_END()
+};
+
+int cmd_stat(int argc, const char **argv, const char *prefix)
+{
+	page_size = sysconf(_SC_PAGE_SIZE);
+
+	memcpy(attrs, default_attrs, sizeof(attrs));
+
+	argc = parse_options(argc, argv, options, stat_usage, 0);
+	if (!argc)
+		usage_with_options(stat_usage, options);
+
+	if (!nr_counters)
+		nr_counters = 8;
+
+	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
+	assert(nr_cpus <= MAX_NR_CPUS);
+	assert(nr_cpus >= 0);
+
+	/*
+	 * We dont want to block the signals - that would cause
+	 * child tasks to inherit that and Ctrl-C would not work.
+	 * What we want is for Ctrl-C to work in the exec()-ed
+	 * task, but being ignored by perf stat itself:
+	 */
+	atexit(sig_atexit);
+	signal(SIGINT,  skip_signal);
+	signal(SIGALRM, skip_signal);
+	signal(SIGABRT, skip_signal);
+
+	return do_perf_stat(argc, argv);
+}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
new file mode 100644
index 00000000000..fe338d3c5d7
--- /dev/null
+++ b/tools/perf/builtin-top.c
@@ -0,0 +1,736 @@
+/*
+ * builtin-top.c
+ *
+ * Builtin top command: Display a continuously updated profile of
+ * any workload, CPU or specific PID.
+ *
+ * Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
+ *
+ * Improvements and fixes by:
+ *
+ *   Arjan van de Ven <arjan@linux.intel.com>
+ *   Yanmin Zhang <yanmin.zhang@intel.com>
+ *   Wu Fengguang <fengguang.wu@intel.com>
+ *   Mike Galbraith <efault@gmx.de>
+ *   Paul Mackerras <paulus@samba.org>
+ *
+ * Released under the GPL v2. (and only v2, not any later version)
+ */
+#include "builtin.h"
+
+#include "perf.h"
+
+#include "util/symbol.h"
+#include "util/color.h"
+#include "util/util.h"
+#include "util/rbtree.h"
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+
+#include <assert.h>
+#include <fcntl.h>
+
+#include <stdio.h>
+
+#include <errno.h>
+#include <time.h>
+#include <sched.h>
+#include <pthread.h>
+
+#include <sys/syscall.h>
+#include <sys/ioctl.h>
+#include <sys/poll.h>
+#include <sys/prctl.h>
+#include <sys/wait.h>
+#include <sys/uio.h>
+#include <sys/mman.h>
+
+#include <linux/unistd.h>
+#include <linux/types.h>
+
+static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
+
+static int			system_wide			=  0;
+
+static int			default_interval		= 100000;
+
+static __u64			count_filter			=  5;
+static int			print_entries			= 15;
+
+static int			target_pid			= -1;
+static int			profile_cpu			= -1;
+static int			nr_cpus				=  0;
+static unsigned int		realtime_prio			=  0;
+static int			group				=  0;
+static unsigned int		page_size;
+static unsigned int		mmap_pages			= 16;
+static int			freq				=  0;
+static int			verbose				=  0;
+
+static char			*sym_filter;
+static unsigned long		filter_start;
+static unsigned long		filter_end;
+
+static int			delay_secs			=  2;
+static int			zero;
+static int			dump_symtab;
+
+/*
+ * Symbols
+ */
+
+static __u64			min_ip;
+static __u64			max_ip = -1ll;
+
+struct sym_entry {
+	struct rb_node		rb_node;
+	struct list_head	node;
+	unsigned long		count[MAX_COUNTERS];
+	unsigned long		snap_count;
+	double			weight;
+	int			skip;
+};
+
+struct sym_entry		*sym_filter_entry;
+
+struct dso			*kernel_dso;
+
+/*
+ * Symbols will be added here in record_ip and will get out
+ * after decayed.
+ */
+static LIST_HEAD(active_symbols);
+static pthread_mutex_t active_symbols_lock = PTHREAD_MUTEX_INITIALIZER;
+
+/*
+ * Ordering weight: count-1 * count-2 * ... / count-n
+ */
+static double sym_weight(const struct sym_entry *sym)
+{
+	double weight = sym->snap_count;
+	int counter;
+
+	for (counter = 1; counter < nr_counters-1; counter++)
+		weight *= sym->count[counter];
+
+	weight /= (sym->count[counter] + 1);
+
+	return weight;
+}
+
+static long			samples;
+static long			userspace_samples;
+static const char		CONSOLE_CLEAR[] = "";
+
+static void __list_insert_active_sym(struct sym_entry *syme)
+{
+	list_add(&syme->node, &active_symbols);
+}
+
+static void list_remove_active_sym(struct sym_entry *syme)
+{
+	pthread_mutex_lock(&active_symbols_lock);
+	list_del_init(&syme->node);
+	pthread_mutex_unlock(&active_symbols_lock);
+}
+
+static void rb_insert_active_sym(struct rb_root *tree, struct sym_entry *se)
+{
+	struct rb_node **p = &tree->rb_node;
+	struct rb_node *parent = NULL;
+	struct sym_entry *iter;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct sym_entry, rb_node);
+
+		if (se->weight > iter->weight)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&se->rb_node, parent, p);
+	rb_insert_color(&se->rb_node, tree);
+}
+
+static void print_sym_table(void)
+{
+	int printed = 0, j;
+	int counter;
+	float samples_per_sec = samples/delay_secs;
+	float ksamples_per_sec = (samples-userspace_samples)/delay_secs;
+	float sum_ksamples = 0.0;
+	struct sym_entry *syme, *n;
+	struct rb_root tmp = RB_ROOT;
+	struct rb_node *nd;
+
+	samples = userspace_samples = 0;
+
+	/* Sort the active symbols */
+	pthread_mutex_lock(&active_symbols_lock);
+	syme = list_entry(active_symbols.next, struct sym_entry, node);
+	pthread_mutex_unlock(&active_symbols_lock);
+
+	list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
+		syme->snap_count = syme->count[0];
+		if (syme->snap_count != 0) {
+			syme->weight = sym_weight(syme);
+			rb_insert_active_sym(&tmp, syme);
+			sum_ksamples += syme->snap_count;
+
+			for (j = 0; j < nr_counters; j++)
+				syme->count[j] = zero ? 0 : syme->count[j] * 7 / 8;
+		} else
+			list_remove_active_sym(syme);
+	}
+
+	puts(CONSOLE_CLEAR);
+
+	printf(
+"------------------------------------------------------------------------------\n");
+	printf( "   PerfTop:%8.0f irqs/sec  kernel:%4.1f%% [",
+		samples_per_sec,
+		100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec)));
+
+	if (nr_counters == 1) {
+		printf("%Ld", attrs[0].sample_period);
+		if (freq)
+			printf("Hz ");
+		else
+			printf(" ");
+	}
+
+	for (counter = 0; counter < nr_counters; counter++) {
+		if (counter)
+			printf("/");
+
+		printf("%s", event_name(counter));
+	}
+
+	printf( "], ");
+
+	if (target_pid != -1)
+		printf(" (target_pid: %d", target_pid);
+	else
+		printf(" (all");
+
+	if (profile_cpu != -1)
+		printf(", cpu: %d)\n", profile_cpu);
+	else {
+		if (target_pid != -1)
+			printf(")\n");
+		else
+			printf(", %d CPUs)\n", nr_cpus);
+	}
+
+	printf("------------------------------------------------------------------------------\n\n");
+
+	if (nr_counters == 1)
+		printf("             samples    pcnt");
+	else
+		printf("  weight     samples    pcnt");
+
+	printf("         RIP          kernel function\n"
+	       	       "  ______     _______   _____   ________________   _______________\n\n"
+	);
+
+	for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
+		struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node);
+		struct symbol *sym = (struct symbol *)(syme + 1);
+		char *color = PERF_COLOR_NORMAL;
+		double pcnt;
+
+		if (++printed > print_entries || syme->snap_count < count_filter)
+			continue;
+
+		pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) /
+					 sum_ksamples));
+
+		/*
+		 * We color high-overhead entries in red, mid-overhead
+		 * entries in green - and keep the low overhead places
+		 * normal:
+		 */
+		if (pcnt >= 5.0) {
+			color = PERF_COLOR_RED;
+		} else {
+			if (pcnt >= 0.5)
+				color = PERF_COLOR_GREEN;
+		}
+
+		if (nr_counters == 1)
+			printf("%20.2f - ", syme->weight);
+		else
+			printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
+
+		color_fprintf(stdout, color, "%4.1f%%", pcnt);
+		printf(" - %016llx : %s\n", sym->start, sym->name);
+	}
+}
+
+static void *display_thread(void *arg)
+{
+	struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
+	int delay_msecs = delay_secs * 1000;
+
+	printf("PerfTop refresh period: %d seconds\n", delay_secs);
+
+	do {
+		print_sym_table();
+	} while (!poll(&stdin_poll, 1, delay_msecs) == 1);
+
+	printf("key pressed - exiting.\n");
+	exit(0);
+
+	return NULL;
+}
+
+static int symbol_filter(struct dso *self, struct symbol *sym)
+{
+	static int filter_match;
+	struct sym_entry *syme;
+	const char *name = sym->name;
+
+	if (!strcmp(name, "_text") ||
+	    !strcmp(name, "_etext") ||
+	    !strcmp(name, "_sinittext") ||
+	    !strncmp("init_module", name, 11) ||
+	    !strncmp("cleanup_module", name, 14) ||
+	    strstr(name, "_text_start") ||
+	    strstr(name, "_text_end"))
+		return 1;
+
+	syme = dso__sym_priv(self, sym);
+	/* Tag samples to be skipped. */
+	if (!strcmp("default_idle", name) ||
+	    !strcmp("cpu_idle", name) ||
+	    !strcmp("enter_idle", name) ||
+	    !strcmp("exit_idle", name) ||
+	    !strcmp("mwait_idle", name))
+		syme->skip = 1;
+
+	if (filter_match == 1) {
+		filter_end = sym->start;
+		filter_match = -1;
+		if (filter_end - filter_start > 10000) {
+			fprintf(stderr,
+				"hm, too large filter symbol <%s> - skipping.\n",
+				sym_filter);
+			fprintf(stderr, "symbol filter start: %016lx\n",
+				filter_start);
+			fprintf(stderr, "                end: %016lx\n",
+				filter_end);
+			filter_end = filter_start = 0;
+			sym_filter = NULL;
+			sleep(1);
+		}
+	}
+
+	if (filter_match == 0 && sym_filter && !strcmp(name, sym_filter)) {
+		filter_match = 1;
+		filter_start = sym->start;
+	}
+
+
+	return 0;
+}
+
+static int parse_symbols(void)
+{
+	struct rb_node *node;
+	struct symbol  *sym;
+
+	kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry));
+	if (kernel_dso == NULL)
+		return -1;
+
+	if (dso__load_kernel(kernel_dso, NULL, symbol_filter, 1) != 0)
+		goto out_delete_dso;
+
+	node = rb_first(&kernel_dso->syms);
+	sym = rb_entry(node, struct symbol, rb_node);
+	min_ip = sym->start;
+
+	node = rb_last(&kernel_dso->syms);
+	sym = rb_entry(node, struct symbol, rb_node);
+	max_ip = sym->end;
+
+	if (dump_symtab)
+		dso__fprintf(kernel_dso, stderr);
+
+	return 0;
+
+out_delete_dso:
+	dso__delete(kernel_dso);
+	kernel_dso = NULL;
+	return -1;
+}
+
+#define TRACE_COUNT     3
+
+/*
+ * Binary search in the histogram table and record the hit:
+ */
+static void record_ip(__u64 ip, int counter)
+{
+	struct symbol *sym = dso__find_symbol(kernel_dso, ip);
+
+	if (sym != NULL) {
+		struct sym_entry *syme = dso__sym_priv(kernel_dso, sym);
+
+		if (!syme->skip) {
+			syme->count[counter]++;
+			pthread_mutex_lock(&active_symbols_lock);
+			if (list_empty(&syme->node) || !syme->node.next)
+				__list_insert_active_sym(syme);
+			pthread_mutex_unlock(&active_symbols_lock);
+			return;
+		}
+	}
+
+	samples--;
+}
+
+static void process_event(__u64 ip, int counter)
+{
+	samples++;
+
+	if (ip < min_ip || ip > max_ip) {
+		userspace_samples++;
+		return;
+	}
+
+	record_ip(ip, counter);
+}
+
+struct mmap_data {
+	int			counter;
+	void			*base;
+	unsigned int		mask;
+	unsigned int		prev;
+};
+
+static unsigned int mmap_read_head(struct mmap_data *md)
+{
+	struct perf_counter_mmap_page *pc = md->base;
+	int head;
+
+	head = pc->data_head;
+	rmb();
+
+	return head;
+}
+
+struct timeval last_read, this_read;
+
+static void mmap_read_counter(struct mmap_data *md)
+{
+	unsigned int head = mmap_read_head(md);
+	unsigned int old = md->prev;
+	unsigned char *data = md->base + page_size;
+	int diff;
+
+	gettimeofday(&this_read, NULL);
+
+	/*
+	 * If we're further behind than half the buffer, there's a chance
+	 * the writer will bite our tail and mess up the samples under us.
+	 *
+	 * If we somehow ended up ahead of the head, we got messed up.
+	 *
+	 * In either case, truncate and restart at head.
+	 */
+	diff = head - old;
+	if (diff > md->mask / 2 || diff < 0) {
+		struct timeval iv;
+		unsigned long msecs;
+
+		timersub(&this_read, &last_read, &iv);
+		msecs = iv.tv_sec*1000 + iv.tv_usec/1000;
+
+		fprintf(stderr, "WARNING: failed to keep up with mmap data."
+				"  Last read %lu msecs ago.\n", msecs);
+
+		/*
+		 * head points to a known good entry, start there.
+		 */
+		old = head;
+	}
+
+	last_read = this_read;
+
+	for (; old != head;) {
+		struct ip_event {
+			struct perf_event_header header;
+			__u64 ip;
+			__u32 pid, target_pid;
+		};
+		struct mmap_event {
+			struct perf_event_header header;
+			__u32 pid, target_pid;
+			__u64 start;
+			__u64 len;
+			__u64 pgoff;
+			char filename[PATH_MAX];
+		};
+
+		typedef union event_union {
+			struct perf_event_header header;
+			struct ip_event ip;
+			struct mmap_event mmap;
+		} event_t;
+
+		event_t *event = (event_t *)&data[old & md->mask];
+
+		event_t event_copy;
+
+		size_t size = event->header.size;
+
+		/*
+		 * Event straddles the mmap boundary -- header should always
+		 * be inside due to u64 alignment of output.
+		 */
+		if ((old & md->mask) + size != ((old + size) & md->mask)) {
+			unsigned int offset = old;
+			unsigned int len = min(sizeof(*event), size), cpy;
+			void *dst = &event_copy;
+
+			do {
+				cpy = min(md->mask + 1 - (offset & md->mask), len);
+				memcpy(dst, &data[offset & md->mask], cpy);
+				offset += cpy;
+				dst += cpy;
+				len -= cpy;
+			} while (len);
+
+			event = &event_copy;
+		}
+
+		old += size;
+
+		if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) {
+			if (event->header.type & PERF_SAMPLE_IP)
+				process_event(event->ip.ip, md->counter);
+		}
+	}
+
+	md->prev = old;
+}
+
+static struct pollfd event_array[MAX_NR_CPUS * MAX_COUNTERS];
+static struct mmap_data mmap_array[MAX_NR_CPUS][MAX_COUNTERS];
+
+static void mmap_read(void)
+{
+	int i, counter;
+
+	for (i = 0; i < nr_cpus; i++) {
+		for (counter = 0; counter < nr_counters; counter++)
+			mmap_read_counter(&mmap_array[i][counter]);
+	}
+}
+
+int nr_poll;
+int group_fd;
+
+static void start_counter(int i, int counter)
+{
+	struct perf_counter_attr *attr;
+	unsigned int cpu;
+
+	cpu = profile_cpu;
+	if (target_pid == -1 && profile_cpu == -1)
+		cpu = i;
+
+	attr = attrs + counter;
+
+	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+	attr->freq		= freq;
+
+try_again:
+	fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0);
+
+	if (fd[i][counter] < 0) {
+		int err = errno;
+
+		if (err == EPERM)
+			die("No permission - are you root?\n");
+		/*
+		 * If it's cycles then fall back to hrtimer
+		 * based cpu-clock-tick sw counter, which
+		 * is always available even if no PMU support:
+		 */
+		if (attr->type == PERF_TYPE_HARDWARE
+			&& attr->config == PERF_COUNT_HW_CPU_CYCLES) {
+
+			if (verbose)
+				warning(" ... trying to fall back to cpu-clock-ticks\n");
+
+			attr->type = PERF_TYPE_SOFTWARE;
+			attr->config = PERF_COUNT_SW_CPU_CLOCK;
+			goto try_again;
+		}
+		printf("\n");
+		error("perfcounter syscall returned with %d (%s)\n",
+			fd[i][counter], strerror(err));
+		die("No CONFIG_PERF_COUNTERS=y kernel support configured?\n");
+		exit(-1);
+	}
+	assert(fd[i][counter] >= 0);
+	fcntl(fd[i][counter], F_SETFL, O_NONBLOCK);
+
+	/*
+	 * First counter acts as the group leader:
+	 */
+	if (group && group_fd == -1)
+		group_fd = fd[i][counter];
+
+	event_array[nr_poll].fd = fd[i][counter];
+	event_array[nr_poll].events = POLLIN;
+	nr_poll++;
+
+	mmap_array[i][counter].counter = counter;
+	mmap_array[i][counter].prev = 0;
+	mmap_array[i][counter].mask = mmap_pages*page_size - 1;
+	mmap_array[i][counter].base = mmap(NULL, (mmap_pages+1)*page_size,
+			PROT_READ, MAP_SHARED, fd[i][counter], 0);
+	if (mmap_array[i][counter].base == MAP_FAILED)
+		die("failed to mmap with %d (%s)\n", errno, strerror(errno));
+}
+
+static int __cmd_top(void)
+{
+	pthread_t thread;
+	int i, counter;
+	int ret;
+
+	for (i = 0; i < nr_cpus; i++) {
+		group_fd = -1;
+		for (counter = 0; counter < nr_counters; counter++)
+			start_counter(i, counter);
+	}
+
+	/* Wait for a minimal set of events before starting the snapshot */
+	poll(event_array, nr_poll, 100);
+
+	mmap_read();
+
+	if (pthread_create(&thread, NULL, display_thread, NULL)) {
+		printf("Could not create display thread.\n");
+		exit(-1);
+	}
+
+	if (realtime_prio) {
+		struct sched_param param;
+
+		param.sched_priority = realtime_prio;
+		if (sched_setscheduler(0, SCHED_FIFO, &param)) {
+			printf("Could not set realtime priority.\n");
+			exit(-1);
+		}
+	}
+
+	while (1) {
+		int hits = samples;
+
+		mmap_read();
+
+		if (hits == samples)
+			ret = poll(event_array, nr_poll, 100);
+	}
+
+	return 0;
+}
+
+static const char * const top_usage[] = {
+	"perf top [<options>]",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_CALLBACK('e', "event", NULL, "event",
+		     "event selector. use 'perf list' to list available events",
+		     parse_events),
+	OPT_INTEGER('c', "count", &default_interval,
+		    "event period to sample"),
+	OPT_INTEGER('p', "pid", &target_pid,
+		    "profile events on existing pid"),
+	OPT_BOOLEAN('a', "all-cpus", &system_wide,
+			    "system-wide collection from all CPUs"),
+	OPT_INTEGER('C', "CPU", &profile_cpu,
+		    "CPU to profile on"),
+	OPT_INTEGER('m', "mmap-pages", &mmap_pages,
+		    "number of mmap data pages"),
+	OPT_INTEGER('r', "realtime", &realtime_prio,
+		    "collect data with this RT SCHED_FIFO priority"),
+	OPT_INTEGER('d', "delay", &delay_secs,
+		    "number of seconds to delay between refreshes"),
+	OPT_BOOLEAN('D', "dump-symtab", &dump_symtab,
+			    "dump the symbol table used for profiling"),
+	OPT_INTEGER('f', "count-filter", &count_filter,
+		    "only display functions with more events than this"),
+	OPT_BOOLEAN('g', "group", &group,
+			    "put the counters into a counter group"),
+	OPT_STRING('s', "sym-filter", &sym_filter, "pattern",
+		    "only display symbols matchig this pattern"),
+	OPT_BOOLEAN('z', "zero", &group,
+		    "zero history across updates"),
+	OPT_INTEGER('F', "freq", &freq,
+		    "profile at this frequency"),
+	OPT_INTEGER('E', "entries", &print_entries,
+		    "display this many functions"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show counter open errors, etc)"),
+	OPT_END()
+};
+
+int cmd_top(int argc, const char **argv, const char *prefix)
+{
+	int counter;
+
+	page_size = sysconf(_SC_PAGE_SIZE);
+
+	argc = parse_options(argc, argv, options, top_usage, 0);
+	if (argc)
+		usage_with_options(top_usage, options);
+
+	if (freq) {
+		default_interval = freq;
+		freq = 1;
+	}
+
+	/* CPU and PID are mutually exclusive */
+	if (target_pid != -1 && profile_cpu != -1) {
+		printf("WARNING: PID switch overriding CPU\n");
+		sleep(1);
+		profile_cpu = -1;
+	}
+
+	if (!nr_counters)
+		nr_counters = 1;
+
+	if (delay_secs < 1)
+		delay_secs = 1;
+
+	parse_symbols();
+
+	/*
+	 * Fill in the ones not specifically initialized via -c:
+	 */
+	for (counter = 0; counter < nr_counters; counter++) {
+		if (attrs[counter].sample_period)
+			continue;
+
+		attrs[counter].sample_period = default_interval;
+	}
+
+	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
+	assert(nr_cpus <= MAX_NR_CPUS);
+	assert(nr_cpus >= 0);
+
+	if (target_pid != -1 || profile_cpu != -1)
+		nr_cpus = 1;
+
+	return __cmd_top();
+}
diff --git a/tools/perf/builtin.h b/tools/perf/builtin.h
new file mode 100644
index 00000000000..51d168230ee
--- /dev/null
+++ b/tools/perf/builtin.h
@@ -0,0 +1,26 @@
+#ifndef BUILTIN_H
+#define BUILTIN_H
+
+#include "util/util.h"
+#include "util/strbuf.h"
+
+extern const char perf_version_string[];
+extern const char perf_usage_string[];
+extern const char perf_more_info_string[];
+
+extern void list_common_cmds_help(void);
+extern const char *help_unknown_cmd(const char *cmd);
+extern void prune_packed_objects(int);
+extern int read_line_with_nul(char *buf, int size, FILE *file);
+extern int check_pager_config(const char *cmd);
+
+extern int cmd_annotate(int argc, const char **argv, const char *prefix);
+extern int cmd_help(int argc, const char **argv, const char *prefix);
+extern int cmd_record(int argc, const char **argv, const char *prefix);
+extern int cmd_report(int argc, const char **argv, const char *prefix);
+extern int cmd_stat(int argc, const char **argv, const char *prefix);
+extern int cmd_top(int argc, const char **argv, const char *prefix);
+extern int cmd_version(int argc, const char **argv, const char *prefix);
+extern int cmd_list(int argc, const char **argv, const char *prefix);
+
+#endif
diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt
new file mode 100644
index 00000000000..eebce30afbc
--- /dev/null
+++ b/tools/perf/command-list.txt
@@ -0,0 +1,10 @@
+#
+# List of known perf commands.
+# command name			category [deprecated] [common]
+#
+perf-annotate			mainporcelain common
+perf-list			mainporcelain common
+perf-record			mainporcelain common
+perf-report			mainporcelain common
+perf-stat			mainporcelain common
+perf-top			mainporcelain common
diff --git a/tools/perf/design.txt b/tools/perf/design.txt
new file mode 100644
index 00000000000..f71e0d245cb
--- /dev/null
+++ b/tools/perf/design.txt
@@ -0,0 +1,457 @@
+
+Performance Counters for Linux
+------------------------------
+
+Performance counters are special hardware registers available on most modern
+CPUs. These registers count the number of certain types of hw events: such
+as instructions executed, cachemisses suffered, or branches mis-predicted -
+without slowing down the kernel or applications. These registers can also
+trigger interrupts when a threshold number of events have passed - and can
+thus be used to profile the code that runs on that CPU.
+
+The Linux Performance Counter subsystem provides an abstraction of these
+hardware capabilities. It provides per task and per CPU counters, counter
+groups, and it provides event capabilities on top of those.  It
+provides "virtual" 64-bit counters, regardless of the width of the
+underlying hardware counters.
+
+Performance counters are accessed via special file descriptors.
+There's one file descriptor per virtual counter used.
+
+The special file descriptor is opened via the perf_counter_open()
+system call:
+
+   int sys_perf_counter_open(struct perf_counter_hw_event *hw_event_uptr,
+			     pid_t pid, int cpu, int group_fd,
+			     unsigned long flags);
+
+The syscall returns the new fd. The fd can be used via the normal
+VFS system calls: read() can be used to read the counter, fcntl()
+can be used to set the blocking mode, etc.
+
+Multiple counters can be kept open at a time, and the counters
+can be poll()ed.
+
+When creating a new counter fd, 'perf_counter_hw_event' is:
+
+struct perf_counter_hw_event {
+        /*
+         * The MSB of the config word signifies if the rest contains cpu
+         * specific (raw) counter configuration data, if unset, the next
+         * 7 bits are an event type and the rest of the bits are the event
+         * identifier.
+         */
+        __u64                   config;
+
+        __u64                   irq_period;
+        __u32                   record_type;
+        __u32                   read_format;
+
+        __u64                   disabled       :  1, /* off by default        */
+                                inherit        :  1, /* children inherit it   */
+                                pinned         :  1, /* must always be on PMU */
+                                exclusive      :  1, /* only group on PMU     */
+                                exclude_user   :  1, /* don't count user      */
+                                exclude_kernel :  1, /* ditto kernel          */
+                                exclude_hv     :  1, /* ditto hypervisor      */
+                                exclude_idle   :  1, /* don't count when idle */
+                                mmap           :  1, /* include mmap data     */
+                                munmap         :  1, /* include munmap data   */
+                                comm           :  1, /* include comm data     */
+
+                                __reserved_1   : 52;
+
+        __u32                   extra_config_len;
+        __u32                   wakeup_events;  /* wakeup every n events */
+
+        __u64                   __reserved_2;
+        __u64                   __reserved_3;
+};
+
+The 'config' field specifies what the counter should count.  It
+is divided into 3 bit-fields:
+
+raw_type: 1 bit   (most significant bit)	0x8000_0000_0000_0000
+type:	  7 bits  (next most significant)	0x7f00_0000_0000_0000
+event_id: 56 bits (least significant)		0x00ff_ffff_ffff_ffff
+
+If 'raw_type' is 1, then the counter will count a hardware event
+specified by the remaining 63 bits of event_config.  The encoding is
+machine-specific.
+
+If 'raw_type' is 0, then the 'type' field says what kind of counter
+this is, with the following encoding:
+
+enum perf_event_types {
+	PERF_TYPE_HARDWARE		= 0,
+	PERF_TYPE_SOFTWARE		= 1,
+	PERF_TYPE_TRACEPOINT		= 2,
+};
+
+A counter of PERF_TYPE_HARDWARE will count the hardware event
+specified by 'event_id':
+
+/*
+ * Generalized performance counter event types, used by the hw_event.event_id
+ * parameter of the sys_perf_counter_open() syscall:
+ */
+enum hw_event_ids {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES	= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES	= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+};
+
+These are standardized types of events that work relatively uniformly
+on all CPUs that implement Performance Counters support under Linux,
+although there may be variations (e.g., different CPUs might count
+cache references and misses at different levels of the cache hierarchy).
+If a CPU is not able to count the selected event, then the system call
+will return -EINVAL.
+
+More hw_event_types are supported as well, but they are CPU-specific
+and accessed as raw events.  For example, to count "External bus
+cycles while bus lock signal asserted" events on Intel Core CPUs, pass
+in a 0x4064 event_id value and set hw_event.raw_type to 1.
+
+A counter of type PERF_TYPE_SOFTWARE will count one of the available
+software events, selected by 'event_id':
+
+/*
+ * Special "software" counters provided by the kernel, even if the hardware
+ * does not support performance counters. These counters measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum sw_event_ids {
+	PERF_COUNT_SW_CPU_CLOCK		= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES	= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS	= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN	= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ	= 6,
+};
+
+Counters of the type PERF_TYPE_TRACEPOINT are available when the ftrace event
+tracer is available, and event_id values can be obtained from
+/debug/tracing/events/*/*/id
+
+
+Counters come in two flavours: counting counters and sampling
+counters.  A "counting" counter is one that is used for counting the
+number of events that occur, and is characterised by having
+irq_period = 0.
+
+
+A read() on a counter returns the current value of the counter and possible
+additional values as specified by 'read_format', each value is a u64 (8 bytes)
+in size.
+
+/*
+ * Bits that can be set in hw_event.read_format to request that
+ * reads on the counter should return the indicated quantities,
+ * in increasing order of bit value, after the counter value.
+ */
+enum perf_counter_read_format {
+        PERF_FORMAT_TOTAL_TIME_ENABLED  =  1,
+        PERF_FORMAT_TOTAL_TIME_RUNNING  =  2,
+};
+
+Using these additional values one can establish the overcommit ratio for a
+particular counter allowing one to take the round-robin scheduling effect
+into account.
+
+
+A "sampling" counter is one that is set up to generate an interrupt
+every N events, where N is given by 'irq_period'.  A sampling counter
+has irq_period > 0. The record_type controls what data is recorded on each
+interrupt:
+
+/*
+ * Bits that can be set in hw_event.record_type to request information
+ * in the overflow packets.
+ */
+enum perf_counter_record_format {
+        PERF_RECORD_IP          = 1U << 0,
+        PERF_RECORD_TID         = 1U << 1,
+        PERF_RECORD_TIME        = 1U << 2,
+        PERF_RECORD_ADDR        = 1U << 3,
+        PERF_RECORD_GROUP       = 1U << 4,
+        PERF_RECORD_CALLCHAIN   = 1U << 5,
+};
+
+Such (and other) events will be recorded in a ring-buffer, which is
+available to user-space using mmap() (see below).
+
+The 'disabled' bit specifies whether the counter starts out disabled
+or enabled.  If it is initially disabled, it can be enabled by ioctl
+or prctl (see below).
+
+The 'inherit' bit, if set, specifies that this counter should count
+events on descendant tasks as well as the task specified.  This only
+applies to new descendents, not to any existing descendents at the
+time the counter is created (nor to any new descendents of existing
+descendents).
+
+The 'pinned' bit, if set, specifies that the counter should always be
+on the CPU if at all possible.  It only applies to hardware counters
+and only to group leaders.  If a pinned counter cannot be put onto the
+CPU (e.g. because there are not enough hardware counters or because of
+a conflict with some other event), then the counter goes into an
+'error' state, where reads return end-of-file (i.e. read() returns 0)
+until the counter is subsequently enabled or disabled.
+
+The 'exclusive' bit, if set, specifies that when this counter's group
+is on the CPU, it should be the only group using the CPU's counters.
+In future, this will allow sophisticated monitoring programs to supply
+extra configuration information via 'extra_config_len' to exploit
+advanced features of the CPU's Performance Monitor Unit (PMU) that are
+not otherwise accessible and that might disrupt other hardware
+counters.
+
+The 'exclude_user', 'exclude_kernel' and 'exclude_hv' bits provide a
+way to request that counting of events be restricted to times when the
+CPU is in user, kernel and/or hypervisor mode.
+
+The 'mmap' and 'munmap' bits allow recording of PROT_EXEC mmap/munmap
+operations, these can be used to relate userspace IP addresses to actual
+code, even after the mapping (or even the whole process) is gone,
+these events are recorded in the ring-buffer (see below).
+
+The 'comm' bit allows tracking of process comm data on process creation.
+This too is recorded in the ring-buffer (see below).
+
+The 'pid' parameter to the perf_counter_open() system call allows the
+counter to be specific to a task:
+
+ pid == 0: if the pid parameter is zero, the counter is attached to the
+ current task.
+
+ pid > 0: the counter is attached to a specific task (if the current task
+ has sufficient privilege to do so)
+
+ pid < 0: all tasks are counted (per cpu counters)
+
+The 'cpu' parameter allows a counter to be made specific to a CPU:
+
+ cpu >= 0: the counter is restricted to a specific CPU
+ cpu == -1: the counter counts on all CPUs
+
+(Note: the combination of 'pid == -1' and 'cpu == -1' is not valid.)
+
+A 'pid > 0' and 'cpu == -1' counter is a per task counter that counts
+events of that task and 'follows' that task to whatever CPU the task
+gets schedule to. Per task counters can be created by any user, for
+their own tasks.
+
+A 'pid == -1' and 'cpu == x' counter is a per CPU counter that counts
+all events on CPU-x. Per CPU counters need CAP_SYS_ADMIN privilege.
+
+The 'flags' parameter is currently unused and must be zero.
+
+The 'group_fd' parameter allows counter "groups" to be set up.  A
+counter group has one counter which is the group "leader".  The leader
+is created first, with group_fd = -1 in the perf_counter_open call
+that creates it.  The rest of the group members are created
+subsequently, with group_fd giving the fd of the group leader.
+(A single counter on its own is created with group_fd = -1 and is
+considered to be a group with only 1 member.)
+
+A counter group is scheduled onto the CPU as a unit, that is, it will
+only be put onto the CPU if all of the counters in the group can be
+put onto the CPU.  This means that the values of the member counters
+can be meaningfully compared, added, divided (to get ratios), etc.,
+with each other, since they have counted events for the same set of
+executed instructions.
+
+
+Like stated, asynchronous events, like counter overflow or PROT_EXEC mmap
+tracking are logged into a ring-buffer. This ring-buffer is created and
+accessed through mmap().
+
+The mmap size should be 1+2^n pages, where the first page is a meta-data page
+(struct perf_counter_mmap_page) that contains various bits of information such
+as where the ring-buffer head is.
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_counter_mmap_page {
+        __u32   version;                /* version number of this structure */
+        __u32   compat_version;         /* lowest version this is compat with */
+
+        /*
+         * Bits needed to read the hw counters in user-space.
+         *
+         *   u32 seq;
+         *   s64 count;
+         *
+         *   do {
+         *     seq = pc->lock;
+         *
+         *     barrier()
+         *     if (pc->index) {
+         *       count = pmc_read(pc->index - 1);
+         *       count += pc->offset;
+         *     } else
+         *       goto regular_read;
+         *
+         *     barrier();
+         *   } while (pc->lock != seq);
+         *
+         * NOTE: for obvious reason this only works on self-monitoring
+         *       processes.
+         */
+        __u32   lock;                   /* seqlock for synchronization */
+        __u32   index;                  /* hardware counter identifier */
+        __s64   offset;                 /* add to hardware counter value */
+
+        /*
+         * Control data for the mmap() data buffer.
+         *
+         * User-space reading this value should issue an rmb(), on SMP capable
+         * platforms, after reading this value -- see perf_counter_wakeup().
+         */
+        __u32   data_head;              /* head in the data section */
+};
+
+NOTE: the hw-counter userspace bits are arch specific and are currently only
+      implemented on powerpc.
+
+The following 2^n pages are the ring-buffer which contains events of the form:
+
+#define PERF_EVENT_MISC_KERNEL          (1 << 0)
+#define PERF_EVENT_MISC_USER            (1 << 1)
+#define PERF_EVENT_MISC_OVERFLOW        (1 << 2)
+
+struct perf_event_header {
+        __u32   type;
+        __u16   misc;
+        __u16   size;
+};
+
+enum perf_event_type {
+
+        /*
+         * The MMAP events record the PROT_EXEC mappings so that we can
+         * correlate userspace IPs to code. They have the following structure:
+         *
+         * struct {
+         *      struct perf_event_header        header;
+         *
+         *      u32                             pid, tid;
+         *      u64                             addr;
+         *      u64                             len;
+         *      u64                             pgoff;
+         *      char                            filename[];
+         * };
+         */
+        PERF_EVENT_MMAP                 = 1,
+        PERF_EVENT_MUNMAP               = 2,
+
+        /*
+         * struct {
+         *      struct perf_event_header        header;
+         *
+         *      u32                             pid, tid;
+         *      char                            comm[];
+         * };
+         */
+        PERF_EVENT_COMM                 = 3,
+
+        /*
+         * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
+         * will be PERF_RECORD_*
+         *
+         * struct {
+         *      struct perf_event_header        header;
+         *
+         *      { u64                   ip;       } && PERF_RECORD_IP
+         *      { u32                   pid, tid; } && PERF_RECORD_TID
+         *      { u64                   time;     } && PERF_RECORD_TIME
+         *      { u64                   addr;     } && PERF_RECORD_ADDR
+         *
+         *      { u64                   nr;
+         *        { u64 event, val; }   cnt[nr];  } && PERF_RECORD_GROUP
+         *
+         *      { u16                   nr,
+         *                              hv,
+         *                              kernel,
+         *                              user;
+         *        u64                   ips[nr];  } && PERF_RECORD_CALLCHAIN
+         * };
+         */
+};
+
+NOTE: PERF_RECORD_CALLCHAIN is arch specific and currently only implemented
+      on x86.
+
+Notification of new events is possible through poll()/select()/epoll() and
+fcntl() managing signals.
+
+Normally a notification is generated for every page filled, however one can
+additionally set perf_counter_hw_event.wakeup_events to generate one every
+so many counter overflow events.
+
+Future work will include a splice() interface to the ring-buffer.
+
+
+Counters can be enabled and disabled in two ways: via ioctl and via
+prctl.  When a counter is disabled, it doesn't count or generate
+events but does continue to exist and maintain its count value.
+
+An individual counter or counter group can be enabled with
+
+	ioctl(fd, PERF_COUNTER_IOC_ENABLE);
+
+or disabled with
+
+	ioctl(fd, PERF_COUNTER_IOC_DISABLE);
+
+Enabling or disabling the leader of a group enables or disables the
+whole group; that is, while the group leader is disabled, none of the
+counters in the group will count.  Enabling or disabling a member of a
+group other than the leader only affects that counter - disabling an
+non-leader stops that counter from counting but doesn't affect any
+other counter.
+
+Additionally, non-inherited overflow counters can use
+
+	ioctl(fd, PERF_COUNTER_IOC_REFRESH, nr);
+
+to enable a counter for 'nr' events, after which it gets disabled again.
+
+A process can enable or disable all the counter groups that are
+attached to it, using prctl:
+
+	prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+
+	prctl(PR_TASK_PERF_COUNTERS_DISABLE);
+
+This applies to all counters on the current process, whether created
+by this process or by another, and doesn't affect any counters that
+this process has created on other processes.  It only enables or
+disables the group leaders, not any other members in the groups.
+
+
+Arch requirements
+-----------------
+
+If your architecture does not have hardware performance metrics, you can
+still use the generic software counters based on hrtimers for sampling.
+
+So to start with, in order to add HAVE_PERF_COUNTERS to your Kconfig, you
+will need at least this:
+	- asm/perf_counter.h - a basic stub will suffice at first
+	- support for atomic64 types (and associated helper functions)
+	- set_perf_counter_pending() implemented
+
+If your architecture does have hardware capabilities, you can override the
+weak stub hw_perf_counter_init() to register hardware counters.
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
new file mode 100644
index 00000000000..4eb72593370
--- /dev/null
+++ b/tools/perf/perf.c
@@ -0,0 +1,428 @@
+/*
+ * perf.c
+ *
+ * Performance analysis utility.
+ *
+ * This is the main hub from which the sub-commands (perf stat,
+ * perf top, perf record, perf report, etc.) are started.
+ */
+#include "builtin.h"
+
+#include "util/exec_cmd.h"
+#include "util/cache.h"
+#include "util/quote.h"
+#include "util/run-command.h"
+
+const char perf_usage_string[] =
+	"perf [--version] [--help] COMMAND [ARGS]";
+
+const char perf_more_info_string[] =
+	"See 'perf help COMMAND' for more information on a specific command.";
+
+static int use_pager = -1;
+struct pager_config {
+	const char *cmd;
+	int val;
+};
+
+static int pager_command_config(const char *var, const char *value, void *data)
+{
+	struct pager_config *c = data;
+	if (!prefixcmp(var, "pager.") && !strcmp(var + 6, c->cmd))
+		c->val = perf_config_bool(var, value);
+	return 0;
+}
+
+/* returns 0 for "no pager", 1 for "use pager", and -1 for "not specified" */
+int check_pager_config(const char *cmd)
+{
+	struct pager_config c;
+	c.cmd = cmd;
+	c.val = -1;
+	perf_config(pager_command_config, &c);
+	return c.val;
+}
+
+static void commit_pager_choice(void) {
+	switch (use_pager) {
+	case 0:
+		setenv("PERF_PAGER", "cat", 1);
+		break;
+	case 1:
+		/* setup_pager(); */
+		break;
+	default:
+		break;
+	}
+}
+
+static int handle_options(const char*** argv, int* argc, int* envchanged)
+{
+	int handled = 0;
+
+	while (*argc > 0) {
+		const char *cmd = (*argv)[0];
+		if (cmd[0] != '-')
+			break;
+
+		/*
+		 * For legacy reasons, the "version" and "help"
+		 * commands can be written with "--" prepended
+		 * to make them look like flags.
+		 */
+		if (!strcmp(cmd, "--help") || !strcmp(cmd, "--version"))
+			break;
+
+		/*
+		 * Check remaining flags.
+		 */
+		if (!prefixcmp(cmd, "--exec-path")) {
+			cmd += 11;
+			if (*cmd == '=')
+				perf_set_argv_exec_path(cmd + 1);
+			else {
+				puts(perf_exec_path());
+				exit(0);
+			}
+		} else if (!strcmp(cmd, "--html-path")) {
+			puts(system_path(PERF_HTML_PATH));
+			exit(0);
+		} else if (!strcmp(cmd, "-p") || !strcmp(cmd, "--paginate")) {
+			use_pager = 1;
+		} else if (!strcmp(cmd, "--no-pager")) {
+			use_pager = 0;
+			if (envchanged)
+				*envchanged = 1;
+		} else if (!strcmp(cmd, "--perf-dir")) {
+			if (*argc < 2) {
+				fprintf(stderr, "No directory given for --perf-dir.\n" );
+				usage(perf_usage_string);
+			}
+			setenv(PERF_DIR_ENVIRONMENT, (*argv)[1], 1);
+			if (envchanged)
+				*envchanged = 1;
+			(*argv)++;
+			(*argc)--;
+			handled++;
+		} else if (!prefixcmp(cmd, "--perf-dir=")) {
+			setenv(PERF_DIR_ENVIRONMENT, cmd + 10, 1);
+			if (envchanged)
+				*envchanged = 1;
+		} else if (!strcmp(cmd, "--work-tree")) {
+			if (*argc < 2) {
+				fprintf(stderr, "No directory given for --work-tree.\n" );
+				usage(perf_usage_string);
+			}
+			setenv(PERF_WORK_TREE_ENVIRONMENT, (*argv)[1], 1);
+			if (envchanged)
+				*envchanged = 1;
+			(*argv)++;
+			(*argc)--;
+		} else if (!prefixcmp(cmd, "--work-tree=")) {
+			setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1);
+			if (envchanged)
+				*envchanged = 1;
+		} else {
+			fprintf(stderr, "Unknown option: %s\n", cmd);
+			usage(perf_usage_string);
+		}
+
+		(*argv)++;
+		(*argc)--;
+		handled++;
+	}
+	return handled;
+}
+
+static int handle_alias(int *argcp, const char ***argv)
+{
+	int envchanged = 0, ret = 0, saved_errno = errno;
+	int count, option_count;
+	const char** new_argv;
+	const char *alias_command;
+	char *alias_string;
+
+	alias_command = (*argv)[0];
+	alias_string = alias_lookup(alias_command);
+	if (alias_string) {
+		if (alias_string[0] == '!') {
+			if (*argcp > 1) {
+				struct strbuf buf;
+
+				strbuf_init(&buf, PATH_MAX);
+				strbuf_addstr(&buf, alias_string);
+				sq_quote_argv(&buf, (*argv) + 1, PATH_MAX);
+				free(alias_string);
+				alias_string = buf.buf;
+			}
+			ret = system(alias_string + 1);
+			if (ret >= 0 && WIFEXITED(ret) &&
+			    WEXITSTATUS(ret) != 127)
+				exit(WEXITSTATUS(ret));
+			die("Failed to run '%s' when expanding alias '%s'",
+			    alias_string + 1, alias_command);
+		}
+		count = split_cmdline(alias_string, &new_argv);
+		if (count < 0)
+			die("Bad alias.%s string", alias_command);
+		option_count = handle_options(&new_argv, &count, &envchanged);
+		if (envchanged)
+			die("alias '%s' changes environment variables\n"
+				 "You can use '!perf' in the alias to do this.",
+				 alias_command);
+		memmove(new_argv - option_count, new_argv,
+				count * sizeof(char *));
+		new_argv -= option_count;
+
+		if (count < 1)
+			die("empty alias for %s", alias_command);
+
+		if (!strcmp(alias_command, new_argv[0]))
+			die("recursive alias: %s", alias_command);
+
+		new_argv = realloc(new_argv, sizeof(char*) *
+				    (count + *argcp + 1));
+		/* insert after command name */
+		memcpy(new_argv + count, *argv + 1, sizeof(char*) * *argcp);
+		new_argv[count+*argcp] = NULL;
+
+		*argv = new_argv;
+		*argcp += count - 1;
+
+		ret = 1;
+	}
+
+	errno = saved_errno;
+
+	return ret;
+}
+
+const char perf_version_string[] = PERF_VERSION;
+
+#define RUN_SETUP	(1<<0)
+#define USE_PAGER	(1<<1)
+/*
+ * require working tree to be present -- anything uses this needs
+ * RUN_SETUP for reading from the configuration file.
+ */
+#define NEED_WORK_TREE	(1<<2)
+
+struct cmd_struct {
+	const char *cmd;
+	int (*fn)(int, const char **, const char *);
+	int option;
+};
+
+static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
+{
+	int status;
+	struct stat st;
+	const char *prefix;
+
+	prefix = NULL;
+	if (p->option & RUN_SETUP)
+		prefix = NULL; /* setup_perf_directory(); */
+
+	if (use_pager == -1 && p->option & RUN_SETUP)
+		use_pager = check_pager_config(p->cmd);
+	if (use_pager == -1 && p->option & USE_PAGER)
+		use_pager = 1;
+	commit_pager_choice();
+
+	if (p->option & NEED_WORK_TREE)
+		/* setup_work_tree() */;
+
+	status = p->fn(argc, argv, prefix);
+	if (status)
+		return status & 0xff;
+
+	/* Somebody closed stdout? */
+	if (fstat(fileno(stdout), &st))
+		return 0;
+	/* Ignore write errors for pipes and sockets.. */
+	if (S_ISFIFO(st.st_mode) || S_ISSOCK(st.st_mode))
+		return 0;
+
+	/* Check for ENOSPC and EIO errors.. */
+	if (fflush(stdout))
+		die("write failure on standard output: %s", strerror(errno));
+	if (ferror(stdout))
+		die("unknown write failure on standard output");
+	if (fclose(stdout))
+		die("close failed on standard output: %s", strerror(errno));
+	return 0;
+}
+
+static void handle_internal_command(int argc, const char **argv)
+{
+	const char *cmd = argv[0];
+	static struct cmd_struct commands[] = {
+		{ "help", cmd_help, 0 },
+		{ "list", cmd_list, 0 },
+		{ "record", cmd_record, 0 },
+		{ "report", cmd_report, 0 },
+		{ "stat", cmd_stat, 0 },
+		{ "top", cmd_top, 0 },
+		{ "annotate", cmd_annotate, 0 },
+		{ "version", cmd_version, 0 },
+	};
+	int i;
+	static const char ext[] = STRIP_EXTENSION;
+
+	if (sizeof(ext) > 1) {
+		i = strlen(argv[0]) - strlen(ext);
+		if (i > 0 && !strcmp(argv[0] + i, ext)) {
+			char *argv0 = strdup(argv[0]);
+			argv[0] = cmd = argv0;
+			argv0[i] = '\0';
+		}
+	}
+
+	/* Turn "perf cmd --help" into "perf help cmd" */
+	if (argc > 1 && !strcmp(argv[1], "--help")) {
+		argv[1] = argv[0];
+		argv[0] = cmd = "help";
+	}
+
+	for (i = 0; i < ARRAY_SIZE(commands); i++) {
+		struct cmd_struct *p = commands+i;
+		if (strcmp(p->cmd, cmd))
+			continue;
+		exit(run_builtin(p, argc, argv));
+	}
+}
+
+static void execv_dashed_external(const char **argv)
+{
+	struct strbuf cmd = STRBUF_INIT;
+	const char *tmp;
+	int status;
+
+	strbuf_addf(&cmd, "perf-%s", argv[0]);
+
+	/*
+	 * argv[0] must be the perf command, but the argv array
+	 * belongs to the caller, and may be reused in
+	 * subsequent loop iterations. Save argv[0] and
+	 * restore it on error.
+	 */
+	tmp = argv[0];
+	argv[0] = cmd.buf;
+
+	/*
+	 * if we fail because the command is not found, it is
+	 * OK to return. Otherwise, we just pass along the status code.
+	 */
+	status = run_command_v_opt(argv, 0);
+	if (status != -ERR_RUN_COMMAND_EXEC) {
+		if (IS_RUN_COMMAND_ERR(status))
+			die("unable to run '%s'", argv[0]);
+		exit(-status);
+	}
+	errno = ENOENT; /* as if we called execvp */
+
+	argv[0] = tmp;
+
+	strbuf_release(&cmd);
+}
+
+static int run_argv(int *argcp, const char ***argv)
+{
+	int done_alias = 0;
+
+	while (1) {
+		/* See if it's an internal command */
+		handle_internal_command(*argcp, *argv);
+
+		/* .. then try the external ones */
+		execv_dashed_external(*argv);
+
+		/* It could be an alias -- this works around the insanity
+		 * of overriding "perf log" with "perf show" by having
+		 * alias.log = show
+		 */
+		if (done_alias || !handle_alias(argcp, argv))
+			break;
+		done_alias = 1;
+	}
+
+	return done_alias;
+}
+
+
+int main(int argc, const char **argv)
+{
+	const char *cmd;
+
+	cmd = perf_extract_argv0_path(argv[0]);
+	if (!cmd)
+		cmd = "perf-help";
+
+	/*
+	 * "perf-xxxx" is the same as "perf xxxx", but we obviously:
+	 *
+	 *  - cannot take flags in between the "perf" and the "xxxx".
+	 *  - cannot execute it externally (since it would just do
+	 *    the same thing over again)
+	 *
+	 * So we just directly call the internal command handler, and
+	 * die if that one cannot handle it.
+	 */
+	if (!prefixcmp(cmd, "perf-")) {
+		cmd += 5;
+		argv[0] = cmd;
+		handle_internal_command(argc, argv);
+		die("cannot handle %s internally", cmd);
+	}
+
+	/* Look for flags.. */
+	argv++;
+	argc--;
+	handle_options(&argv, &argc, NULL);
+	commit_pager_choice();
+	if (argc > 0) {
+		if (!prefixcmp(argv[0], "--"))
+			argv[0] += 2;
+	} else {
+		/* The user didn't specify a command; give them help */
+		printf("\n usage: %s\n\n", perf_usage_string);
+		list_common_cmds_help();
+		printf("\n %s\n\n", perf_more_info_string);
+		exit(1);
+	}
+	cmd = argv[0];
+
+	/*
+	 * We use PATH to find perf commands, but we prepend some higher
+	 * precidence paths: the "--exec-path" option, the PERF_EXEC_PATH
+	 * environment, and the $(perfexecdir) from the Makefile at build
+	 * time.
+	 */
+	setup_path();
+
+	while (1) {
+		static int done_help = 0;
+		static int was_alias = 0;
+
+		was_alias = run_argv(&argc, &argv);
+		if (errno != ENOENT)
+			break;
+
+		if (was_alias) {
+			fprintf(stderr, "Expansion of alias '%s' failed; "
+				"'%s' is not a perf-command\n",
+				cmd, argv[0]);
+			exit(1);
+		}
+		if (!done_help) {
+			cmd = argv[0] = help_unknown_cmd(cmd);
+			done_help = 1;
+		} else
+			break;
+	}
+
+	fprintf(stderr, "Failed to run command '%s': %s\n",
+		cmd, strerror(errno));
+
+	return 1;
+}
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
new file mode 100644
index 00000000000..87a1aca4a42
--- /dev/null
+++ b/tools/perf/perf.h
@@ -0,0 +1,68 @@
+#ifndef _PERF_PERF_H
+#define _PERF_PERF_H
+
+#if defined(__x86_64__) || defined(__i386__)
+#include "../../arch/x86/include/asm/unistd.h"
+#define rmb()		asm volatile("lfence" ::: "memory")
+#define cpu_relax()	asm volatile("rep; nop" ::: "memory");
+#endif
+
+#ifdef __powerpc__
+#include "../../arch/powerpc/include/asm/unistd.h"
+#define rmb()		asm volatile ("sync" ::: "memory")
+#define cpu_relax()	asm volatile ("" ::: "memory");
+#endif
+
+#include <time.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/syscall.h>
+
+#include "../../include/linux/perf_counter.h"
+
+/*
+ * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
+ * counters in the current task.
+ */
+#define PR_TASK_PERF_COUNTERS_DISABLE   31
+#define PR_TASK_PERF_COUNTERS_ENABLE    32
+
+#ifndef NSEC_PER_SEC
+# define NSEC_PER_SEC			1000000000ULL
+#endif
+
+static inline unsigned long long rdclock(void)
+{
+	struct timespec ts;
+
+	clock_gettime(CLOCK_MONOTONIC, &ts);
+	return ts.tv_sec * 1000000000ULL + ts.tv_nsec;
+}
+
+/*
+ * Pick up some kernel type conventions:
+ */
+#define __user
+#define asmlinkage
+
+#define unlikely(x)	__builtin_expect(!!(x), 0)
+#define min(x, y) ({				\
+	typeof(x) _min1 = (x);			\
+	typeof(y) _min2 = (y);			\
+	(void) (&_min1 == &_min2);		\
+	_min1 < _min2 ? _min1 : _min2; })
+
+static inline int
+sys_perf_counter_open(struct perf_counter_attr *attr,
+		      pid_t pid, int cpu, int group_fd,
+		      unsigned long flags)
+{
+	attr->size = sizeof(*attr);
+	return syscall(__NR_perf_counter_open, attr, pid, cpu,
+		       group_fd, flags);
+}
+
+#define MAX_COUNTERS			256
+#define MAX_NR_CPUS			256
+
+#endif
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
new file mode 100755
index 00000000000..c561d1538c0
--- /dev/null
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+GVF=PERF-VERSION-FILE
+DEF_VER=v0.0.1.PERF
+
+LF='
+'
+
+# First see if there is a version file (included in release tarballs),
+# then try git-describe, then default.
+if test -f version
+then
+	VN=$(cat version) || VN="$DEF_VER"
+elif test -d .git -o -f .git &&
+	VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
+	case "$VN" in
+	*$LF*) (exit 1) ;;
+	v[0-9]*)
+		git update-index -q --refresh
+		test -z "$(git diff-index --name-only HEAD --)" ||
+		VN="$VN-dirty" ;;
+	esac
+then
+	VN=$(echo "$VN" | sed -e 's/-/./g');
+else
+	VN="$DEF_VER"
+fi
+
+VN=$(expr "$VN" : v*'\(.*\)')
+
+if test -r $GVF
+then
+	VC=$(sed -e 's/^PERF_VERSION = //' <$GVF)
+else
+	VC=unset
+fi
+test "$VN" = "$VC" || {
+	echo >&2 "PERF_VERSION = $VN"
+	echo "PERF_VERSION = $VN" >$GVF
+}
+
+
diff --git a/tools/perf/util/abspath.c b/tools/perf/util/abspath.c
new file mode 100644
index 00000000000..61d33b81fc9
--- /dev/null
+++ b/tools/perf/util/abspath.c
@@ -0,0 +1,117 @@
+#include "cache.h"
+
+/*
+ * Do not use this for inspecting *tracked* content.  When path is a
+ * symlink to a directory, we do not want to say it is a directory when
+ * dealing with tracked content in the working tree.
+ */
+static int is_directory(const char *path)
+{
+	struct stat st;
+	return (!stat(path, &st) && S_ISDIR(st.st_mode));
+}
+
+/* We allow "recursive" symbolic links. Only within reason, though. */
+#define MAXDEPTH 5
+
+const char *make_absolute_path(const char *path)
+{
+	static char bufs[2][PATH_MAX + 1], *buf = bufs[0], *next_buf = bufs[1];
+	char cwd[1024] = "";
+	int buf_index = 1, len;
+
+	int depth = MAXDEPTH;
+	char *last_elem = NULL;
+	struct stat st;
+
+	if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX)
+		die ("Too long path: %.*s", 60, path);
+
+	while (depth--) {
+		if (!is_directory(buf)) {
+			char *last_slash = strrchr(buf, '/');
+			if (last_slash) {
+				*last_slash = '\0';
+				last_elem = xstrdup(last_slash + 1);
+			} else {
+				last_elem = xstrdup(buf);
+				*buf = '\0';
+			}
+		}
+
+		if (*buf) {
+			if (!*cwd && !getcwd(cwd, sizeof(cwd)))
+				die ("Could not get current working directory");
+
+			if (chdir(buf))
+				die ("Could not switch to '%s'", buf);
+		}
+		if (!getcwd(buf, PATH_MAX))
+			die ("Could not get current working directory");
+
+		if (last_elem) {
+			int len = strlen(buf);
+			if (len + strlen(last_elem) + 2 > PATH_MAX)
+				die ("Too long path name: '%s/%s'",
+						buf, last_elem);
+			buf[len] = '/';
+			strcpy(buf + len + 1, last_elem);
+			free(last_elem);
+			last_elem = NULL;
+		}
+
+		if (!lstat(buf, &st) && S_ISLNK(st.st_mode)) {
+			len = readlink(buf, next_buf, PATH_MAX);
+			if (len < 0)
+				die ("Invalid symlink: %s", buf);
+			if (PATH_MAX <= len)
+				die("symbolic link too long: %s", buf);
+			next_buf[len] = '\0';
+			buf = next_buf;
+			buf_index = 1 - buf_index;
+			next_buf = bufs[buf_index];
+		} else
+			break;
+	}
+
+	if (*cwd && chdir(cwd))
+		die ("Could not change back to '%s'", cwd);
+
+	return buf;
+}
+
+static const char *get_pwd_cwd(void)
+{
+	static char cwd[PATH_MAX + 1];
+	char *pwd;
+	struct stat cwd_stat, pwd_stat;
+	if (getcwd(cwd, PATH_MAX) == NULL)
+		return NULL;
+	pwd = getenv("PWD");
+	if (pwd && strcmp(pwd, cwd)) {
+		stat(cwd, &cwd_stat);
+		if (!stat(pwd, &pwd_stat) &&
+		    pwd_stat.st_dev == cwd_stat.st_dev &&
+		    pwd_stat.st_ino == cwd_stat.st_ino) {
+			strlcpy(cwd, pwd, PATH_MAX);
+		}
+	}
+	return cwd;
+}
+
+const char *make_nonrelative_path(const char *path)
+{
+	static char buf[PATH_MAX + 1];
+
+	if (is_absolute_path(path)) {
+		if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX)
+			die("Too long path: %.*s", 60, path);
+	} else {
+		const char *cwd = get_pwd_cwd();
+		if (!cwd)
+			die("Cannot determine the current working directory");
+		if (snprintf(buf, PATH_MAX, "%s/%s", cwd, path) >= PATH_MAX)
+			die("Too long path: %.*s", 60, path);
+	}
+	return buf;
+}
diff --git a/tools/perf/util/alias.c b/tools/perf/util/alias.c
new file mode 100644
index 00000000000..9b3dd2b428d
--- /dev/null
+++ b/tools/perf/util/alias.c
@@ -0,0 +1,77 @@
+#include "cache.h"
+
+static const char *alias_key;
+static char *alias_val;
+
+static int alias_lookup_cb(const char *k, const char *v, void *cb)
+{
+	if (!prefixcmp(k, "alias.") && !strcmp(k+6, alias_key)) {
+		if (!v)
+			return config_error_nonbool(k);
+		alias_val = strdup(v);
+		return 0;
+	}
+	return 0;
+}
+
+char *alias_lookup(const char *alias)
+{
+	alias_key = alias;
+	alias_val = NULL;
+	perf_config(alias_lookup_cb, NULL);
+	return alias_val;
+}
+
+int split_cmdline(char *cmdline, const char ***argv)
+{
+	int src, dst, count = 0, size = 16;
+	char quoted = 0;
+
+	*argv = malloc(sizeof(char*) * size);
+
+	/* split alias_string */
+	(*argv)[count++] = cmdline;
+	for (src = dst = 0; cmdline[src];) {
+		char c = cmdline[src];
+		if (!quoted && isspace(c)) {
+			cmdline[dst++] = 0;
+			while (cmdline[++src]
+					&& isspace(cmdline[src]))
+				; /* skip */
+			if (count >= size) {
+				size += 16;
+				*argv = realloc(*argv, sizeof(char*) * size);
+			}
+			(*argv)[count++] = cmdline + dst;
+		} else if (!quoted && (c == '\'' || c == '"')) {
+			quoted = c;
+			src++;
+		} else if (c == quoted) {
+			quoted = 0;
+			src++;
+		} else {
+			if (c == '\\' && quoted != '\'') {
+				src++;
+				c = cmdline[src];
+				if (!c) {
+					free(*argv);
+					*argv = NULL;
+					return error("cmdline ends with \\");
+				}
+			}
+			cmdline[dst++] = c;
+			src++;
+		}
+	}
+
+	cmdline[dst] = 0;
+
+	if (quoted) {
+		free(*argv);
+		*argv = NULL;
+		return error("unclosed quote");
+	}
+
+	return count;
+}
+
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
new file mode 100644
index 00000000000..393d6146d13
--- /dev/null
+++ b/tools/perf/util/cache.h
@@ -0,0 +1,119 @@
+#ifndef CACHE_H
+#define CACHE_H
+
+#include "util.h"
+#include "strbuf.h"
+
+#define PERF_DIR_ENVIRONMENT "PERF_DIR"
+#define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE"
+#define DEFAULT_PERF_DIR_ENVIRONMENT ".perf"
+#define DB_ENVIRONMENT "PERF_OBJECT_DIRECTORY"
+#define INDEX_ENVIRONMENT "PERF_INDEX_FILE"
+#define GRAFT_ENVIRONMENT "PERF_GRAFT_FILE"
+#define TEMPLATE_DIR_ENVIRONMENT "PERF_TEMPLATE_DIR"
+#define CONFIG_ENVIRONMENT "PERF_CONFIG"
+#define EXEC_PATH_ENVIRONMENT "PERF_EXEC_PATH"
+#define CEILING_DIRECTORIES_ENVIRONMENT "PERF_CEILING_DIRECTORIES"
+#define PERFATTRIBUTES_FILE ".perfattributes"
+#define INFOATTRIBUTES_FILE "info/attributes"
+#define ATTRIBUTE_MACRO_PREFIX "[attr]"
+
+typedef int (*config_fn_t)(const char *, const char *, void *);
+extern int perf_default_config(const char *, const char *, void *);
+extern int perf_config_from_file(config_fn_t fn, const char *, void *);
+extern int perf_config(config_fn_t fn, void *);
+extern int perf_parse_ulong(const char *, unsigned long *);
+extern int perf_config_int(const char *, const char *);
+extern unsigned long perf_config_ulong(const char *, const char *);
+extern int perf_config_bool_or_int(const char *, const char *, int *);
+extern int perf_config_bool(const char *, const char *);
+extern int perf_config_string(const char **, const char *, const char *);
+extern int perf_config_set(const char *, const char *);
+extern int perf_config_set_multivar(const char *, const char *, const char *, int);
+extern int perf_config_rename_section(const char *, const char *);
+extern const char *perf_etc_perfconfig(void);
+extern int check_repository_format_version(const char *var, const char *value, void *cb);
+extern int perf_config_system(void);
+extern int perf_config_global(void);
+extern int config_error_nonbool(const char *);
+extern const char *config_exclusive_filename;
+
+#define MAX_PERFNAME (1000)
+extern char perf_default_email[MAX_PERFNAME];
+extern char perf_default_name[MAX_PERFNAME];
+extern int user_ident_explicitly_given;
+
+extern const char *perf_log_output_encoding;
+extern const char *perf_mailmap_file;
+
+/* IO helper functions */
+extern void maybe_flush_or_die(FILE *, const char *);
+extern int copy_fd(int ifd, int ofd);
+extern int copy_file(const char *dst, const char *src, int mode);
+extern ssize_t read_in_full(int fd, void *buf, size_t count);
+extern ssize_t write_in_full(int fd, const void *buf, size_t count);
+extern void write_or_die(int fd, const void *buf, size_t count);
+extern int write_or_whine(int fd, const void *buf, size_t count, const char *msg);
+extern int write_or_whine_pipe(int fd, const void *buf, size_t count, const char *msg);
+extern void fsync_or_die(int fd, const char *);
+
+/* pager.c */
+extern void setup_pager(void);
+extern const char *pager_program;
+extern int pager_in_use(void);
+extern int pager_use_color;
+
+extern const char *editor_program;
+extern const char *excludes_file;
+
+char *alias_lookup(const char *alias);
+int split_cmdline(char *cmdline, const char ***argv);
+
+#define alloc_nr(x) (((x)+16)*3/2)
+
+/*
+ * Realloc the buffer pointed at by variable 'x' so that it can hold
+ * at least 'nr' entries; the number of entries currently allocated
+ * is 'alloc', using the standard growing factor alloc_nr() macro.
+ *
+ * DO NOT USE any expression with side-effect for 'x' or 'alloc'.
+ */
+#define ALLOC_GROW(x, nr, alloc) \
+	do { \
+		if ((nr) > alloc) { \
+			if (alloc_nr(alloc) < (nr)) \
+				alloc = (nr); \
+			else \
+				alloc = alloc_nr(alloc); \
+			x = xrealloc((x), alloc * sizeof(*(x))); \
+		} \
+	} while(0)
+
+
+static inline int is_absolute_path(const char *path)
+{
+	return path[0] == '/';
+}
+
+const char *make_absolute_path(const char *path);
+const char *make_nonrelative_path(const char *path);
+const char *make_relative_path(const char *abs, const char *base);
+int normalize_path_copy(char *dst, const char *src);
+int longest_ancestor_length(const char *path, const char *prefix_list);
+char *strip_path_suffix(const char *path, const char *suffix);
+
+extern char *mkpath(const char *fmt, ...) __attribute__((format (printf, 1, 2)));
+extern char *perf_path(const char *fmt, ...) __attribute__((format (printf, 1, 2)));
+/* perf_mkstemp() - create tmp file honoring TMPDIR variable */
+extern int perf_mkstemp(char *path, size_t len, const char *template);
+
+extern char *mksnpath(char *buf, size_t n, const char *fmt, ...)
+	__attribute__((format (printf, 3, 4)));
+extern char *perf_snpath(char *buf, size_t n, const char *fmt, ...)
+	__attribute__((format (printf, 3, 4)));
+extern char *perf_pathdup(const char *fmt, ...)
+	__attribute__((format (printf, 1, 2)));
+
+extern size_t strlcpy(char *dest, const char *src, size_t size);
+
+#endif /* CACHE_H */
diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c
new file mode 100644
index 00000000000..9a8c20ccc53
--- /dev/null
+++ b/tools/perf/util/color.c
@@ -0,0 +1,241 @@
+#include "cache.h"
+#include "color.h"
+
+int perf_use_color_default = -1;
+
+static int parse_color(const char *name, int len)
+{
+	static const char * const color_names[] = {
+		"normal", "black", "red", "green", "yellow",
+		"blue", "magenta", "cyan", "white"
+	};
+	char *end;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(color_names); i++) {
+		const char *str = color_names[i];
+		if (!strncasecmp(name, str, len) && !str[len])
+			return i - 1;
+	}
+	i = strtol(name, &end, 10);
+	if (end - name == len && i >= -1 && i <= 255)
+		return i;
+	return -2;
+}
+
+static int parse_attr(const char *name, int len)
+{
+	static const int attr_values[] = { 1, 2, 4, 5, 7 };
+	static const char * const attr_names[] = {
+		"bold", "dim", "ul", "blink", "reverse"
+	};
+	int i;
+	for (i = 0; i < ARRAY_SIZE(attr_names); i++) {
+		const char *str = attr_names[i];
+		if (!strncasecmp(name, str, len) && !str[len])
+			return attr_values[i];
+	}
+	return -1;
+}
+
+void color_parse(const char *value, const char *var, char *dst)
+{
+	color_parse_mem(value, strlen(value), var, dst);
+}
+
+void color_parse_mem(const char *value, int value_len, const char *var,
+		char *dst)
+{
+	const char *ptr = value;
+	int len = value_len;
+	int attr = -1;
+	int fg = -2;
+	int bg = -2;
+
+	if (!strncasecmp(value, "reset", len)) {
+		strcpy(dst, PERF_COLOR_RESET);
+		return;
+	}
+
+	/* [fg [bg]] [attr] */
+	while (len > 0) {
+		const char *word = ptr;
+		int val, wordlen = 0;
+
+		while (len > 0 && !isspace(word[wordlen])) {
+			wordlen++;
+			len--;
+		}
+
+		ptr = word + wordlen;
+		while (len > 0 && isspace(*ptr)) {
+			ptr++;
+			len--;
+		}
+
+		val = parse_color(word, wordlen);
+		if (val >= -1) {
+			if (fg == -2) {
+				fg = val;
+				continue;
+			}
+			if (bg == -2) {
+				bg = val;
+				continue;
+			}
+			goto bad;
+		}
+		val = parse_attr(word, wordlen);
+		if (val < 0 || attr != -1)
+			goto bad;
+		attr = val;
+	}
+
+	if (attr >= 0 || fg >= 0 || bg >= 0) {
+		int sep = 0;
+
+		*dst++ = '\033';
+		*dst++ = '[';
+		if (attr >= 0) {
+			*dst++ = '0' + attr;
+			sep++;
+		}
+		if (fg >= 0) {
+			if (sep++)
+				*dst++ = ';';
+			if (fg < 8) {
+				*dst++ = '3';
+				*dst++ = '0' + fg;
+			} else {
+				dst += sprintf(dst, "38;5;%d", fg);
+			}
+		}
+		if (bg >= 0) {
+			if (sep++)
+				*dst++ = ';';
+			if (bg < 8) {
+				*dst++ = '4';
+				*dst++ = '0' + bg;
+			} else {
+				dst += sprintf(dst, "48;5;%d", bg);
+			}
+		}
+		*dst++ = 'm';
+	}
+	*dst = 0;
+	return;
+bad:
+	die("bad color value '%.*s' for variable '%s'", value_len, value, var);
+}
+
+int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty)
+{
+	if (value) {
+		if (!strcasecmp(value, "never"))
+			return 0;
+		if (!strcasecmp(value, "always"))
+			return 1;
+		if (!strcasecmp(value, "auto"))
+			goto auto_color;
+	}
+
+	/* Missing or explicit false to turn off colorization */
+	if (!perf_config_bool(var, value))
+		return 0;
+
+	/* any normal truth value defaults to 'auto' */
+ auto_color:
+	if (stdout_is_tty < 0)
+		stdout_is_tty = isatty(1);
+	if (stdout_is_tty || (pager_in_use() && pager_use_color)) {
+		char *term = getenv("TERM");
+		if (term && strcmp(term, "dumb"))
+			return 1;
+	}
+	return 0;
+}
+
+int perf_color_default_config(const char *var, const char *value, void *cb)
+{
+	if (!strcmp(var, "color.ui")) {
+		perf_use_color_default = perf_config_colorbool(var, value, -1);
+		return 0;
+	}
+
+	return perf_default_config(var, value, cb);
+}
+
+static int color_vfprintf(FILE *fp, const char *color, const char *fmt,
+		va_list args, const char *trail)
+{
+	int r = 0;
+
+	/*
+	 * Auto-detect:
+	 */
+	if (perf_use_color_default < 0) {
+		if (isatty(1) || pager_in_use())
+			perf_use_color_default = 1;
+		else
+			perf_use_color_default = 0;
+	}
+
+	if (perf_use_color_default && *color)
+		r += fprintf(fp, "%s", color);
+	r += vfprintf(fp, fmt, args);
+	if (perf_use_color_default && *color)
+		r += fprintf(fp, "%s", PERF_COLOR_RESET);
+	if (trail)
+		r += fprintf(fp, "%s", trail);
+	return r;
+}
+
+
+
+int color_fprintf(FILE *fp, const char *color, const char *fmt, ...)
+{
+	va_list args;
+	int r;
+
+	va_start(args, fmt);
+	r = color_vfprintf(fp, color, fmt, args, NULL);
+	va_end(args);
+	return r;
+}
+
+int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...)
+{
+	va_list args;
+	int r;
+	va_start(args, fmt);
+	r = color_vfprintf(fp, color, fmt, args, "\n");
+	va_end(args);
+	return r;
+}
+
+/*
+ * This function splits the buffer by newlines and colors the lines individually.
+ *
+ * Returns 0 on success.
+ */
+int color_fwrite_lines(FILE *fp, const char *color,
+		size_t count, const char *buf)
+{
+	if (!*color)
+		return fwrite(buf, count, 1, fp) != 1;
+	while (count) {
+		char *p = memchr(buf, '\n', count);
+		if (p != buf && (fputs(color, fp) < 0 ||
+				fwrite(buf, p ? p - buf : count, 1, fp) != 1 ||
+				fputs(PERF_COLOR_RESET, fp) < 0))
+			return -1;
+		if (!p)
+			return 0;
+		if (fputc('\n', fp) < 0)
+			return -1;
+		count -= p + 1 - buf;
+		buf = p + 1;
+	}
+	return 0;
+}
+
+
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
new file mode 100644
index 00000000000..5abfd379582
--- /dev/null
+++ b/tools/perf/util/color.h
@@ -0,0 +1,36 @@
+#ifndef COLOR_H
+#define COLOR_H
+
+/* "\033[1;38;5;2xx;48;5;2xxm\0" is 23 bytes */
+#define COLOR_MAXLEN 24
+
+#define PERF_COLOR_NORMAL	""
+#define PERF_COLOR_RESET	"\033[m"
+#define PERF_COLOR_BOLD		"\033[1m"
+#define PERF_COLOR_RED		"\033[31m"
+#define PERF_COLOR_GREEN	"\033[32m"
+#define PERF_COLOR_YELLOW	"\033[33m"
+#define PERF_COLOR_BLUE		"\033[34m"
+#define PERF_COLOR_MAGENTA	"\033[35m"
+#define PERF_COLOR_CYAN		"\033[36m"
+#define PERF_COLOR_BG_RED	"\033[41m"
+
+/*
+ * This variable stores the value of color.ui
+ */
+extern int perf_use_color_default;
+
+
+/*
+ * Use this instead of perf_default_config if you need the value of color.ui.
+ */
+int perf_color_default_config(const char *var, const char *value, void *cb);
+
+int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty);
+void color_parse(const char *value, const char *var, char *dst);
+void color_parse_mem(const char *value, int len, const char *var, char *dst);
+int color_fprintf(FILE *fp, const char *color, const char *fmt, ...);
+int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
+int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf);
+
+#endif /* COLOR_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
new file mode 100644
index 00000000000..3dd13faa6a2
--- /dev/null
+++ b/tools/perf/util/config.c
@@ -0,0 +1,873 @@
+/*
+ * GIT - The information manager from hell
+ *
+ * Copyright (C) Linus Torvalds, 2005
+ * Copyright (C) Johannes Schindelin, 2005
+ *
+ */
+#include "util.h"
+#include "cache.h"
+#include "exec_cmd.h"
+
+#define MAXNAME (256)
+
+static FILE *config_file;
+static const char *config_file_name;
+static int config_linenr;
+static int config_file_eof;
+
+const char *config_exclusive_filename = NULL;
+
+static int get_next_char(void)
+{
+	int c;
+	FILE *f;
+
+	c = '\n';
+	if ((f = config_file) != NULL) {
+		c = fgetc(f);
+		if (c == '\r') {
+			/* DOS like systems */
+			c = fgetc(f);
+			if (c != '\n') {
+				ungetc(c, f);
+				c = '\r';
+			}
+		}
+		if (c == '\n')
+			config_linenr++;
+		if (c == EOF) {
+			config_file_eof = 1;
+			c = '\n';
+		}
+	}
+	return c;
+}
+
+static char *parse_value(void)
+{
+	static char value[1024];
+	int quote = 0, comment = 0, len = 0, space = 0;
+
+	for (;;) {
+		int c = get_next_char();
+		if (len >= sizeof(value) - 1)
+			return NULL;
+		if (c == '\n') {
+			if (quote)
+				return NULL;
+			value[len] = 0;
+			return value;
+		}
+		if (comment)
+			continue;
+		if (isspace(c) && !quote) {
+			space = 1;
+			continue;
+		}
+		if (!quote) {
+			if (c == ';' || c == '#') {
+				comment = 1;
+				continue;
+			}
+		}
+		if (space) {
+			if (len)
+				value[len++] = ' ';
+			space = 0;
+		}
+		if (c == '\\') {
+			c = get_next_char();
+			switch (c) {
+			case '\n':
+				continue;
+			case 't':
+				c = '\t';
+				break;
+			case 'b':
+				c = '\b';
+				break;
+			case 'n':
+				c = '\n';
+				break;
+			/* Some characters escape as themselves */
+			case '\\': case '"':
+				break;
+			/* Reject unknown escape sequences */
+			default:
+				return NULL;
+			}
+			value[len++] = c;
+			continue;
+		}
+		if (c == '"') {
+			quote = 1-quote;
+			continue;
+		}
+		value[len++] = c;
+	}
+}
+
+static inline int iskeychar(int c)
+{
+	return isalnum(c) || c == '-';
+}
+
+static int get_value(config_fn_t fn, void *data, char *name, unsigned int len)
+{
+	int c;
+	char *value;
+
+	/* Get the full name */
+	for (;;) {
+		c = get_next_char();
+		if (config_file_eof)
+			break;
+		if (!iskeychar(c))
+			break;
+		name[len++] = tolower(c);
+		if (len >= MAXNAME)
+			return -1;
+	}
+	name[len] = 0;
+	while (c == ' ' || c == '\t')
+		c = get_next_char();
+
+	value = NULL;
+	if (c != '\n') {
+		if (c != '=')
+			return -1;
+		value = parse_value();
+		if (!value)
+			return -1;
+	}
+	return fn(name, value, data);
+}
+
+static int get_extended_base_var(char *name, int baselen, int c)
+{
+	do {
+		if (c == '\n')
+			return -1;
+		c = get_next_char();
+	} while (isspace(c));
+
+	/* We require the format to be '[base "extension"]' */
+	if (c != '"')
+		return -1;
+	name[baselen++] = '.';
+
+	for (;;) {
+		int c = get_next_char();
+		if (c == '\n')
+			return -1;
+		if (c == '"')
+			break;
+		if (c == '\\') {
+			c = get_next_char();
+			if (c == '\n')
+				return -1;
+		}
+		name[baselen++] = c;
+		if (baselen > MAXNAME / 2)
+			return -1;
+	}
+
+	/* Final ']' */
+	if (get_next_char() != ']')
+		return -1;
+	return baselen;
+}
+
+static int get_base_var(char *name)
+{
+	int baselen = 0;
+
+	for (;;) {
+		int c = get_next_char();
+		if (config_file_eof)
+			return -1;
+		if (c == ']')
+			return baselen;
+		if (isspace(c))
+			return get_extended_base_var(name, baselen, c);
+		if (!iskeychar(c) && c != '.')
+			return -1;
+		if (baselen > MAXNAME / 2)
+			return -1;
+		name[baselen++] = tolower(c);
+	}
+}
+
+static int perf_parse_file(config_fn_t fn, void *data)
+{
+	int comment = 0;
+	int baselen = 0;
+	static char var[MAXNAME];
+
+	/* U+FEFF Byte Order Mark in UTF8 */
+	static const unsigned char *utf8_bom = (unsigned char *) "\xef\xbb\xbf";
+	const unsigned char *bomptr = utf8_bom;
+
+	for (;;) {
+		int c = get_next_char();
+		if (bomptr && *bomptr) {
+			/* We are at the file beginning; skip UTF8-encoded BOM
+			 * if present. Sane editors won't put this in on their
+			 * own, but e.g. Windows Notepad will do it happily. */
+			if ((unsigned char) c == *bomptr) {
+				bomptr++;
+				continue;
+			} else {
+				/* Do not tolerate partial BOM. */
+				if (bomptr != utf8_bom)
+					break;
+				/* No BOM at file beginning. Cool. */
+				bomptr = NULL;
+			}
+		}
+		if (c == '\n') {
+			if (config_file_eof)
+				return 0;
+			comment = 0;
+			continue;
+		}
+		if (comment || isspace(c))
+			continue;
+		if (c == '#' || c == ';') {
+			comment = 1;
+			continue;
+		}
+		if (c == '[') {
+			baselen = get_base_var(var);
+			if (baselen <= 0)
+				break;
+			var[baselen++] = '.';
+			var[baselen] = 0;
+			continue;
+		}
+		if (!isalpha(c))
+			break;
+		var[baselen] = tolower(c);
+		if (get_value(fn, data, var, baselen+1) < 0)
+			break;
+	}
+	die("bad config file line %d in %s", config_linenr, config_file_name);
+}
+
+static int parse_unit_factor(const char *end, unsigned long *val)
+{
+	if (!*end)
+		return 1;
+	else if (!strcasecmp(end, "k")) {
+		*val *= 1024;
+		return 1;
+	}
+	else if (!strcasecmp(end, "m")) {
+		*val *= 1024 * 1024;
+		return 1;
+	}
+	else if (!strcasecmp(end, "g")) {
+		*val *= 1024 * 1024 * 1024;
+		return 1;
+	}
+	return 0;
+}
+
+static int perf_parse_long(const char *value, long *ret)
+{
+	if (value && *value) {
+		char *end;
+		long val = strtol(value, &end, 0);
+		unsigned long factor = 1;
+		if (!parse_unit_factor(end, &factor))
+			return 0;
+		*ret = val * factor;
+		return 1;
+	}
+	return 0;
+}
+
+int perf_parse_ulong(const char *value, unsigned long *ret)
+{
+	if (value && *value) {
+		char *end;
+		unsigned long val = strtoul(value, &end, 0);
+		if (!parse_unit_factor(end, &val))
+			return 0;
+		*ret = val;
+		return 1;
+	}
+	return 0;
+}
+
+static void die_bad_config(const char *name)
+{
+	if (config_file_name)
+		die("bad config value for '%s' in %s", name, config_file_name);
+	die("bad config value for '%s'", name);
+}
+
+int perf_config_int(const char *name, const char *value)
+{
+	long ret = 0;
+	if (!perf_parse_long(value, &ret))
+		die_bad_config(name);
+	return ret;
+}
+
+unsigned long perf_config_ulong(const char *name, const char *value)
+{
+	unsigned long ret;
+	if (!perf_parse_ulong(value, &ret))
+		die_bad_config(name);
+	return ret;
+}
+
+int perf_config_bool_or_int(const char *name, const char *value, int *is_bool)
+{
+	*is_bool = 1;
+	if (!value)
+		return 1;
+	if (!*value)
+		return 0;
+	if (!strcasecmp(value, "true") || !strcasecmp(value, "yes") || !strcasecmp(value, "on"))
+		return 1;
+	if (!strcasecmp(value, "false") || !strcasecmp(value, "no") || !strcasecmp(value, "off"))
+		return 0;
+	*is_bool = 0;
+	return perf_config_int(name, value);
+}
+
+int perf_config_bool(const char *name, const char *value)
+{
+	int discard;
+	return !!perf_config_bool_or_int(name, value, &discard);
+}
+
+int perf_config_string(const char **dest, const char *var, const char *value)
+{
+	if (!value)
+		return config_error_nonbool(var);
+	*dest = strdup(value);
+	return 0;
+}
+
+static int perf_default_core_config(const char *var, const char *value)
+{
+	/* Add other config variables here and to Documentation/config.txt. */
+	return 0;
+}
+
+int perf_default_config(const char *var, const char *value, void *dummy)
+{
+	if (!prefixcmp(var, "core."))
+		return perf_default_core_config(var, value);
+
+	/* Add other config variables here and to Documentation/config.txt. */
+	return 0;
+}
+
+int perf_config_from_file(config_fn_t fn, const char *filename, void *data)
+{
+	int ret;
+	FILE *f = fopen(filename, "r");
+
+	ret = -1;
+	if (f) {
+		config_file = f;
+		config_file_name = filename;
+		config_linenr = 1;
+		config_file_eof = 0;
+		ret = perf_parse_file(fn, data);
+		fclose(f);
+		config_file_name = NULL;
+	}
+	return ret;
+}
+
+const char *perf_etc_perfconfig(void)
+{
+	static const char *system_wide;
+	if (!system_wide)
+		system_wide = system_path(ETC_PERFCONFIG);
+	return system_wide;
+}
+
+static int perf_env_bool(const char *k, int def)
+{
+	const char *v = getenv(k);
+	return v ? perf_config_bool(k, v) : def;
+}
+
+int perf_config_system(void)
+{
+	return !perf_env_bool("PERF_CONFIG_NOSYSTEM", 0);
+}
+
+int perf_config_global(void)
+{
+	return !perf_env_bool("PERF_CONFIG_NOGLOBAL", 0);
+}
+
+int perf_config(config_fn_t fn, void *data)
+{
+	int ret = 0, found = 0;
+	char *repo_config = NULL;
+	const char *home = NULL;
+
+	/* Setting $PERF_CONFIG makes perf read _only_ the given config file. */
+	if (config_exclusive_filename)
+		return perf_config_from_file(fn, config_exclusive_filename, data);
+	if (perf_config_system() && !access(perf_etc_perfconfig(), R_OK)) {
+		ret += perf_config_from_file(fn, perf_etc_perfconfig(),
+					    data);
+		found += 1;
+	}
+
+	home = getenv("HOME");
+	if (perf_config_global() && home) {
+		char *user_config = strdup(mkpath("%s/.perfconfig", home));
+		if (!access(user_config, R_OK)) {
+			ret += perf_config_from_file(fn, user_config, data);
+			found += 1;
+		}
+		free(user_config);
+	}
+
+	repo_config = perf_pathdup("config");
+	if (!access(repo_config, R_OK)) {
+		ret += perf_config_from_file(fn, repo_config, data);
+		found += 1;
+	}
+	free(repo_config);
+	if (found == 0)
+		return -1;
+	return ret;
+}
+
+/*
+ * Find all the stuff for perf_config_set() below.
+ */
+
+#define MAX_MATCHES 512
+
+static struct {
+	int baselen;
+	char* key;
+	int do_not_match;
+	regex_t* value_regex;
+	int multi_replace;
+	size_t offset[MAX_MATCHES];
+	enum { START, SECTION_SEEN, SECTION_END_SEEN, KEY_SEEN } state;
+	int seen;
+} store;
+
+static int matches(const char* key, const char* value)
+{
+	return !strcmp(key, store.key) &&
+		(store.value_regex == NULL ||
+		 (store.do_not_match ^
+		  !regexec(store.value_regex, value, 0, NULL, 0)));
+}
+
+static int store_aux(const char* key, const char* value, void *cb)
+{
+	const char *ep;
+	size_t section_len;
+
+	switch (store.state) {
+	case KEY_SEEN:
+		if (matches(key, value)) {
+			if (store.seen == 1 && store.multi_replace == 0) {
+				warning("%s has multiple values", key);
+			} else if (store.seen >= MAX_MATCHES) {
+				error("too many matches for %s", key);
+				return 1;
+			}
+
+			store.offset[store.seen] = ftell(config_file);
+			store.seen++;
+		}
+		break;
+	case SECTION_SEEN:
+		/*
+		 * What we are looking for is in store.key (both
+		 * section and var), and its section part is baselen
+		 * long.  We found key (again, both section and var).
+		 * We would want to know if this key is in the same
+		 * section as what we are looking for.  We already
+		 * know we are in the same section as what should
+		 * hold store.key.
+		 */
+		ep = strrchr(key, '.');
+		section_len = ep - key;
+
+		if ((section_len != store.baselen) ||
+		    memcmp(key, store.key, section_len+1)) {
+			store.state = SECTION_END_SEEN;
+			break;
+		}
+
+		/*
+		 * Do not increment matches: this is no match, but we
+		 * just made sure we are in the desired section.
+		 */
+		store.offset[store.seen] = ftell(config_file);
+		/* fallthru */
+	case SECTION_END_SEEN:
+	case START:
+		if (matches(key, value)) {
+			store.offset[store.seen] = ftell(config_file);
+			store.state = KEY_SEEN;
+			store.seen++;
+		} else {
+			if (strrchr(key, '.') - key == store.baselen &&
+			      !strncmp(key, store.key, store.baselen)) {
+					store.state = SECTION_SEEN;
+					store.offset[store.seen] = ftell(config_file);
+			}
+		}
+	}
+	return 0;
+}
+
+static int store_write_section(int fd, const char* key)
+{
+	const char *dot;
+	int i, success;
+	struct strbuf sb = STRBUF_INIT;
+
+	dot = memchr(key, '.', store.baselen);
+	if (dot) {
+		strbuf_addf(&sb, "[%.*s \"", (int)(dot - key), key);
+		for (i = dot - key + 1; i < store.baselen; i++) {
+			if (key[i] == '"' || key[i] == '\\')
+				strbuf_addch(&sb, '\\');
+			strbuf_addch(&sb, key[i]);
+		}
+		strbuf_addstr(&sb, "\"]\n");
+	} else {
+		strbuf_addf(&sb, "[%.*s]\n", store.baselen, key);
+	}
+
+	success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+	strbuf_release(&sb);
+
+	return success;
+}
+
+static int store_write_pair(int fd, const char* key, const char* value)
+{
+	int i, success;
+	int length = strlen(key + store.baselen + 1);
+	const char *quote = "";
+	struct strbuf sb = STRBUF_INIT;
+
+	/*
+	 * Check to see if the value needs to be surrounded with a dq pair.
+	 * Note that problematic characters are always backslash-quoted; this
+	 * check is about not losing leading or trailing SP and strings that
+	 * follow beginning-of-comment characters (i.e. ';' and '#') by the
+	 * configuration parser.
+	 */
+	if (value[0] == ' ')
+		quote = "\"";
+	for (i = 0; value[i]; i++)
+		if (value[i] == ';' || value[i] == '#')
+			quote = "\"";
+	if (i && value[i - 1] == ' ')
+		quote = "\"";
+
+	strbuf_addf(&sb, "\t%.*s = %s",
+		    length, key + store.baselen + 1, quote);
+
+	for (i = 0; value[i]; i++)
+		switch (value[i]) {
+		case '\n':
+			strbuf_addstr(&sb, "\\n");
+			break;
+		case '\t':
+			strbuf_addstr(&sb, "\\t");
+			break;
+		case '"':
+		case '\\':
+			strbuf_addch(&sb, '\\');
+		default:
+			strbuf_addch(&sb, value[i]);
+			break;
+		}
+	strbuf_addf(&sb, "%s\n", quote);
+
+	success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+	strbuf_release(&sb);
+
+	return success;
+}
+
+static ssize_t find_beginning_of_line(const char* contents, size_t size,
+	size_t offset_, int* found_bracket)
+{
+	size_t equal_offset = size, bracket_offset = size;
+	ssize_t offset;
+
+contline:
+	for (offset = offset_-2; offset > 0
+			&& contents[offset] != '\n'; offset--)
+		switch (contents[offset]) {
+			case '=': equal_offset = offset; break;
+			case ']': bracket_offset = offset; break;
+		}
+	if (offset > 0 && contents[offset-1] == '\\') {
+		offset_ = offset;
+		goto contline;
+	}
+	if (bracket_offset < equal_offset) {
+		*found_bracket = 1;
+		offset = bracket_offset+1;
+	} else
+		offset++;
+
+	return offset;
+}
+
+int perf_config_set(const char* key, const char* value)
+{
+	return perf_config_set_multivar(key, value, NULL, 0);
+}
+
+/*
+ * If value==NULL, unset in (remove from) config,
+ * if value_regex!=NULL, disregard key/value pairs where value does not match.
+ * if multi_replace==0, nothing, or only one matching key/value is replaced,
+ *     else all matching key/values (regardless how many) are removed,
+ *     before the new pair is written.
+ *
+ * Returns 0 on success.
+ *
+ * This function does this:
+ *
+ * - it locks the config file by creating ".perf/config.lock"
+ *
+ * - it then parses the config using store_aux() as validator to find
+ *   the position on the key/value pair to replace. If it is to be unset,
+ *   it must be found exactly once.
+ *
+ * - the config file is mmap()ed and the part before the match (if any) is
+ *   written to the lock file, then the changed part and the rest.
+ *
+ * - the config file is removed and the lock file rename()d to it.
+ *
+ */
+int perf_config_set_multivar(const char* key, const char* value,
+	const char* value_regex, int multi_replace)
+{
+	int i, dot;
+	int fd = -1, in_fd;
+	int ret = 0;
+	char* config_filename;
+	const char* last_dot = strrchr(key, '.');
+
+	if (config_exclusive_filename)
+		config_filename = strdup(config_exclusive_filename);
+	else
+		config_filename = perf_pathdup("config");
+
+	/*
+	 * Since "key" actually contains the section name and the real
+	 * key name separated by a dot, we have to know where the dot is.
+	 */
+
+	if (last_dot == NULL) {
+		error("key does not contain a section: %s", key);
+		ret = 2;
+		goto out_free;
+	}
+	store.baselen = last_dot - key;
+
+	store.multi_replace = multi_replace;
+
+	/*
+	 * Validate the key and while at it, lower case it for matching.
+	 */
+	store.key = malloc(strlen(key) + 1);
+	dot = 0;
+	for (i = 0; key[i]; i++) {
+		unsigned char c = key[i];
+		if (c == '.')
+			dot = 1;
+		/* Leave the extended basename untouched.. */
+		if (!dot || i > store.baselen) {
+			if (!iskeychar(c) || (i == store.baselen+1 && !isalpha(c))) {
+				error("invalid key: %s", key);
+				free(store.key);
+				ret = 1;
+				goto out_free;
+			}
+			c = tolower(c);
+		} else if (c == '\n') {
+			error("invalid key (newline): %s", key);
+			free(store.key);
+			ret = 1;
+			goto out_free;
+		}
+		store.key[i] = c;
+	}
+	store.key[i] = 0;
+
+	/*
+	 * If .perf/config does not exist yet, write a minimal version.
+	 */
+	in_fd = open(config_filename, O_RDONLY);
+	if ( in_fd < 0 ) {
+		free(store.key);
+
+		if ( ENOENT != errno ) {
+			error("opening %s: %s", config_filename,
+			      strerror(errno));
+			ret = 3; /* same as "invalid config file" */
+			goto out_free;
+		}
+		/* if nothing to unset, error out */
+		if (value == NULL) {
+			ret = 5;
+			goto out_free;
+		}
+
+		store.key = (char*)key;
+		if (!store_write_section(fd, key) ||
+		    !store_write_pair(fd, key, value))
+			goto write_err_out;
+	} else {
+		struct stat st;
+		char* contents;
+		size_t contents_sz, copy_begin, copy_end;
+		int i, new_line = 0;
+
+		if (value_regex == NULL)
+			store.value_regex = NULL;
+		else {
+			if (value_regex[0] == '!') {
+				store.do_not_match = 1;
+				value_regex++;
+			} else
+				store.do_not_match = 0;
+
+			store.value_regex = (regex_t*)malloc(sizeof(regex_t));
+			if (regcomp(store.value_regex, value_regex,
+					REG_EXTENDED)) {
+				error("invalid pattern: %s", value_regex);
+				free(store.value_regex);
+				ret = 6;
+				goto out_free;
+			}
+		}
+
+		store.offset[0] = 0;
+		store.state = START;
+		store.seen = 0;
+
+		/*
+		 * After this, store.offset will contain the *end* offset
+		 * of the last match, or remain at 0 if no match was found.
+		 * As a side effect, we make sure to transform only a valid
+		 * existing config file.
+		 */
+		if (perf_config_from_file(store_aux, config_filename, NULL)) {
+			error("invalid config file %s", config_filename);
+			free(store.key);
+			if (store.value_regex != NULL) {
+				regfree(store.value_regex);
+				free(store.value_regex);
+			}
+			ret = 3;
+			goto out_free;
+		}
+
+		free(store.key);
+		if (store.value_regex != NULL) {
+			regfree(store.value_regex);
+			free(store.value_regex);
+		}
+
+		/* if nothing to unset, or too many matches, error out */
+		if ((store.seen == 0 && value == NULL) ||
+				(store.seen > 1 && multi_replace == 0)) {
+			ret = 5;
+			goto out_free;
+		}
+
+		fstat(in_fd, &st);
+		contents_sz = xsize_t(st.st_size);
+		contents = mmap(NULL, contents_sz, PROT_READ,
+			MAP_PRIVATE, in_fd, 0);
+		close(in_fd);
+
+		if (store.seen == 0)
+			store.seen = 1;
+
+		for (i = 0, copy_begin = 0; i < store.seen; i++) {
+			if (store.offset[i] == 0) {
+				store.offset[i] = copy_end = contents_sz;
+			} else if (store.state != KEY_SEEN) {
+				copy_end = store.offset[i];
+			} else
+				copy_end = find_beginning_of_line(
+					contents, contents_sz,
+					store.offset[i]-2, &new_line);
+
+			if (copy_end > 0 && contents[copy_end-1] != '\n')
+				new_line = 1;
+
+			/* write the first part of the config */
+			if (copy_end > copy_begin) {
+				if (write_in_full(fd, contents + copy_begin,
+						  copy_end - copy_begin) <
+				    copy_end - copy_begin)
+					goto write_err_out;
+				if (new_line &&
+				    write_in_full(fd, "\n", 1) != 1)
+					goto write_err_out;
+			}
+			copy_begin = store.offset[i];
+		}
+
+		/* write the pair (value == NULL means unset) */
+		if (value != NULL) {
+			if (store.state == START) {
+				if (!store_write_section(fd, key))
+					goto write_err_out;
+			}
+			if (!store_write_pair(fd, key, value))
+				goto write_err_out;
+		}
+
+		/* write the rest of the config */
+		if (copy_begin < contents_sz)
+			if (write_in_full(fd, contents + copy_begin,
+					  contents_sz - copy_begin) <
+			    contents_sz - copy_begin)
+				goto write_err_out;
+
+		munmap(contents, contents_sz);
+	}
+
+	ret = 0;
+
+out_free:
+	free(config_filename);
+	return ret;
+
+write_err_out:
+	goto out_free;
+
+}
+
+/*
+ * Call this to report error for your variable that should not
+ * get a boolean value (i.e. "[my] var" means "true").
+ */
+int config_error_nonbool(const char *var)
+{
+	return error("Missing value for '%s'", var);
+}
diff --git a/tools/perf/util/ctype.c b/tools/perf/util/ctype.c
new file mode 100644
index 00000000000..b90ec004f29
--- /dev/null
+++ b/tools/perf/util/ctype.c
@@ -0,0 +1,26 @@
+/*
+ * Sane locale-independent, ASCII ctype.
+ *
+ * No surprises, and works with signed and unsigned chars.
+ */
+#include "cache.h"
+
+enum {
+	S = GIT_SPACE,
+	A = GIT_ALPHA,
+	D = GIT_DIGIT,
+	G = GIT_GLOB_SPECIAL,	/* *, ?, [, \\ */
+	R = GIT_REGEX_SPECIAL,	/* $, (, ), +, ., ^, {, | * */
+};
+
+unsigned char sane_ctype[256] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 0, S, S, 0, 0, S, 0, 0,		/*   0.. 15 */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,		/*  16.. 31 */
+	S, 0, 0, 0, R, 0, 0, 0, R, R, G, R, 0, 0, R, 0,		/*  32.. 47 */
+	D, D, D, D, D, D, D, D, D, D, 0, 0, 0, 0, 0, G,		/*  48.. 63 */
+	0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A,		/*  64.. 79 */
+	A, A, A, A, A, A, A, A, A, A, A, G, G, 0, R, 0,		/*  80.. 95 */
+	0, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A,		/*  96..111 */
+	A, A, A, A, A, A, A, A, A, A, A, R, R, 0, 0, 0,		/* 112..127 */
+	/* Nothing in the 128.. range */
+};
diff --git a/tools/perf/util/environment.c b/tools/perf/util/environment.c
new file mode 100644
index 00000000000..275b0ee345f
--- /dev/null
+++ b/tools/perf/util/environment.c
@@ -0,0 +1,9 @@
+/*
+ * We put all the perf config variables in this same object
+ * file, so that programs can link against the config parser
+ * without having to link against all the rest of perf.
+ */
+#include "cache.h"
+
+const char *pager_program;
+int pager_use_color = 1;
diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c
new file mode 100644
index 00000000000..d3929226315
--- /dev/null
+++ b/tools/perf/util/exec_cmd.c
@@ -0,0 +1,165 @@
+#include "cache.h"
+#include "exec_cmd.h"
+#include "quote.h"
+#define MAX_ARGS	32
+
+extern char **environ;
+static const char *argv_exec_path;
+static const char *argv0_path;
+
+const char *system_path(const char *path)
+{
+#ifdef RUNTIME_PREFIX
+	static const char *prefix;
+#else
+	static const char *prefix = PREFIX;
+#endif
+	struct strbuf d = STRBUF_INIT;
+
+	if (is_absolute_path(path))
+		return path;
+
+#ifdef RUNTIME_PREFIX
+	assert(argv0_path);
+	assert(is_absolute_path(argv0_path));
+
+	if (!prefix &&
+	    !(prefix = strip_path_suffix(argv0_path, PERF_EXEC_PATH)) &&
+	    !(prefix = strip_path_suffix(argv0_path, BINDIR)) &&
+	    !(prefix = strip_path_suffix(argv0_path, "perf"))) {
+		prefix = PREFIX;
+		fprintf(stderr, "RUNTIME_PREFIX requested, "
+				"but prefix computation failed.  "
+				"Using static fallback '%s'.\n", prefix);
+	}
+#endif
+
+	strbuf_addf(&d, "%s/%s", prefix, path);
+	path = strbuf_detach(&d, NULL);
+	return path;
+}
+
+const char *perf_extract_argv0_path(const char *argv0)
+{
+	const char *slash;
+
+	if (!argv0 || !*argv0)
+		return NULL;
+	slash = argv0 + strlen(argv0);
+
+	while (argv0 <= slash && !is_dir_sep(*slash))
+		slash--;
+
+	if (slash >= argv0) {
+		argv0_path = strndup(argv0, slash - argv0);
+		return slash + 1;
+	}
+
+	return argv0;
+}
+
+void perf_set_argv_exec_path(const char *exec_path)
+{
+	argv_exec_path = exec_path;
+	/*
+	 * Propagate this setting to external programs.
+	 */
+	setenv(EXEC_PATH_ENVIRONMENT, exec_path, 1);
+}
+
+
+/* Returns the highest-priority, location to look for perf programs. */
+const char *perf_exec_path(void)
+{
+	const char *env;
+
+	if (argv_exec_path)
+		return argv_exec_path;
+
+	env = getenv(EXEC_PATH_ENVIRONMENT);
+	if (env && *env) {
+		return env;
+	}
+
+	return system_path(PERF_EXEC_PATH);
+}
+
+static void add_path(struct strbuf *out, const char *path)
+{
+	if (path && *path) {
+		if (is_absolute_path(path))
+			strbuf_addstr(out, path);
+		else
+			strbuf_addstr(out, make_nonrelative_path(path));
+
+		strbuf_addch(out, PATH_SEP);
+	}
+}
+
+void setup_path(void)
+{
+	const char *old_path = getenv("PATH");
+	struct strbuf new_path = STRBUF_INIT;
+
+	add_path(&new_path, perf_exec_path());
+	add_path(&new_path, argv0_path);
+
+	if (old_path)
+		strbuf_addstr(&new_path, old_path);
+	else
+		strbuf_addstr(&new_path, "/usr/local/bin:/usr/bin:/bin");
+
+	setenv("PATH", new_path.buf, 1);
+
+	strbuf_release(&new_path);
+}
+
+const char **prepare_perf_cmd(const char **argv)
+{
+	int argc;
+	const char **nargv;
+
+	for (argc = 0; argv[argc]; argc++)
+		; /* just counting */
+	nargv = malloc(sizeof(*nargv) * (argc + 2));
+
+	nargv[0] = "perf";
+	for (argc = 0; argv[argc]; argc++)
+		nargv[argc + 1] = argv[argc];
+	nargv[argc + 1] = NULL;
+	return nargv;
+}
+
+int execv_perf_cmd(const char **argv) {
+	const char **nargv = prepare_perf_cmd(argv);
+
+	/* execvp() can only ever return if it fails */
+	execvp("perf", (char **)nargv);
+
+	free(nargv);
+	return -1;
+}
+
+
+int execl_perf_cmd(const char *cmd,...)
+{
+	int argc;
+	const char *argv[MAX_ARGS + 1];
+	const char *arg;
+	va_list param;
+
+	va_start(param, cmd);
+	argv[0] = cmd;
+	argc = 1;
+	while (argc < MAX_ARGS) {
+		arg = argv[argc++] = va_arg(param, char *);
+		if (!arg)
+			break;
+	}
+	va_end(param);
+	if (MAX_ARGS <= argc)
+		return error("too many args to run %s", cmd);
+
+	argv[argc] = NULL;
+	return execv_perf_cmd(argv);
+}
diff --git a/tools/perf/util/exec_cmd.h b/tools/perf/util/exec_cmd.h
new file mode 100644
index 00000000000..effe25eb154
--- /dev/null
+++ b/tools/perf/util/exec_cmd.h
@@ -0,0 +1,13 @@
+#ifndef PERF_EXEC_CMD_H
+#define PERF_EXEC_CMD_H
+
+extern void perf_set_argv_exec_path(const char *exec_path);
+extern const char *perf_extract_argv0_path(const char *path);
+extern const char *perf_exec_path(void);
+extern void setup_path(void);
+extern const char **prepare_perf_cmd(const char **argv);
+extern int execv_perf_cmd(const char **argv); /* NULL terminated */
+extern int execl_perf_cmd(const char *cmd, ...);
+extern const char *system_path(const char *path);
+
+#endif /* PERF_EXEC_CMD_H */
diff --git a/tools/perf/util/generate-cmdlist.sh b/tools/perf/util/generate-cmdlist.sh
new file mode 100755
index 00000000000..f06f6fd148f
--- /dev/null
+++ b/tools/perf/util/generate-cmdlist.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+echo "/* Automatically generated by $0 */
+struct cmdname_help
+{
+    char name[16];
+    char help[80];
+};
+
+static struct cmdname_help common_cmds[] = {"
+
+sed -n -e 's/^perf-\([^ 	]*\)[ 	].* common.*/\1/p' command-list.txt |
+sort |
+while read cmd
+do
+     sed -n '
+     /^NAME/,/perf-'"$cmd"'/H
+     ${
+            x
+            s/.*perf-'"$cmd"' - \(.*\)/  {"'"$cmd"'", "\1"},/
+	    p
+     }' "Documentation/perf-$cmd.txt"
+done
+echo "};"
diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c
new file mode 100644
index 00000000000..6653f7dd1d7
--- /dev/null
+++ b/tools/perf/util/help.c
@@ -0,0 +1,367 @@
+#include "cache.h"
+#include "../builtin.h"
+#include "exec_cmd.h"
+#include "levenshtein.h"
+#include "help.h"
+
+/* most GUI terminals set COLUMNS (although some don't export it) */
+static int term_columns(void)
+{
+	char *col_string = getenv("COLUMNS");
+	int n_cols;
+
+	if (col_string && (n_cols = atoi(col_string)) > 0)
+		return n_cols;
+
+#ifdef TIOCGWINSZ
+	{
+		struct winsize ws;
+		if (!ioctl(1, TIOCGWINSZ, &ws)) {
+			if (ws.ws_col)
+				return ws.ws_col;
+		}
+	}
+#endif
+
+	return 80;
+}
+
+void add_cmdname(struct cmdnames *cmds, const char *name, int len)
+{
+	struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
+
+	ent->len = len;
+	memcpy(ent->name, name, len);
+	ent->name[len] = 0;
+
+	ALLOC_GROW(cmds->names, cmds->cnt + 1, cmds->alloc);
+	cmds->names[cmds->cnt++] = ent;
+}
+
+static void clean_cmdnames(struct cmdnames *cmds)
+{
+	int i;
+	for (i = 0; i < cmds->cnt; ++i)
+		free(cmds->names[i]);
+	free(cmds->names);
+	cmds->cnt = 0;
+	cmds->alloc = 0;
+}
+
+static int cmdname_compare(const void *a_, const void *b_)
+{
+	struct cmdname *a = *(struct cmdname **)a_;
+	struct cmdname *b = *(struct cmdname **)b_;
+	return strcmp(a->name, b->name);
+}
+
+static void uniq(struct cmdnames *cmds)
+{
+	int i, j;
+
+	if (!cmds->cnt)
+		return;
+
+	for (i = j = 1; i < cmds->cnt; i++)
+		if (strcmp(cmds->names[i]->name, cmds->names[i-1]->name))
+			cmds->names[j++] = cmds->names[i];
+
+	cmds->cnt = j;
+}
+
+void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes)
+{
+	int ci, cj, ei;
+	int cmp;
+
+	ci = cj = ei = 0;
+	while (ci < cmds->cnt && ei < excludes->cnt) {
+		cmp = strcmp(cmds->names[ci]->name, excludes->names[ei]->name);
+		if (cmp < 0)
+			cmds->names[cj++] = cmds->names[ci++];
+		else if (cmp == 0)
+			ci++, ei++;
+		else if (cmp > 0)
+			ei++;
+	}
+
+	while (ci < cmds->cnt)
+		cmds->names[cj++] = cmds->names[ci++];
+
+	cmds->cnt = cj;
+}
+
+static void pretty_print_string_list(struct cmdnames *cmds, int longest)
+{
+	int cols = 1, rows;
+	int space = longest + 1; /* min 1 SP between words */
+	int max_cols = term_columns() - 1; /* don't print *on* the edge */
+	int i, j;
+
+	if (space < max_cols)
+		cols = max_cols / space;
+	rows = (cmds->cnt + cols - 1) / cols;
+
+	for (i = 0; i < rows; i++) {
+		printf("  ");
+
+		for (j = 0; j < cols; j++) {
+			int n = j * rows + i;
+			int size = space;
+			if (n >= cmds->cnt)
+				break;
+			if (j == cols-1 || n + rows >= cmds->cnt)
+				size = 1;
+			printf("%-*s", size, cmds->names[n]->name);
+		}
+		putchar('\n');
+	}
+}
+
+static int is_executable(const char *name)
+{
+	struct stat st;
+
+	if (stat(name, &st) || /* stat, not lstat */
+	    !S_ISREG(st.st_mode))
+		return 0;
+
+#ifdef __MINGW32__
+	/* cannot trust the executable bit, peek into the file instead */
+	char buf[3] = { 0 };
+	int n;
+	int fd = open(name, O_RDONLY);
+	st.st_mode &= ~S_IXUSR;
+	if (fd >= 0) {
+		n = read(fd, buf, 2);
+		if (n == 2)
+			/* DOS executables start with "MZ" */
+			if (!strcmp(buf, "#!") || !strcmp(buf, "MZ"))
+				st.st_mode |= S_IXUSR;
+		close(fd);
+	}
+#endif
+	return st.st_mode & S_IXUSR;
+}
+
+static void list_commands_in_dir(struct cmdnames *cmds,
+					 const char *path,
+					 const char *prefix)
+{
+	int prefix_len;
+	DIR *dir = opendir(path);
+	struct dirent *de;
+	struct strbuf buf = STRBUF_INIT;
+	int len;
+
+	if (!dir)
+		return;
+	if (!prefix)
+		prefix = "perf-";
+	prefix_len = strlen(prefix);
+
+	strbuf_addf(&buf, "%s/", path);
+	len = buf.len;
+
+	while ((de = readdir(dir)) != NULL) {
+		int entlen;
+
+		if (prefixcmp(de->d_name, prefix))
+			continue;
+
+		strbuf_setlen(&buf, len);
+		strbuf_addstr(&buf, de->d_name);
+		if (!is_executable(buf.buf))
+			continue;
+
+		entlen = strlen(de->d_name) - prefix_len;
+		if (has_extension(de->d_name, ".exe"))
+			entlen -= 4;
+
+		add_cmdname(cmds, de->d_name + prefix_len, entlen);
+	}
+	closedir(dir);
+	strbuf_release(&buf);
+}
+
+void load_command_list(const char *prefix,
+		struct cmdnames *main_cmds,
+		struct cmdnames *other_cmds)
+{
+	const char *env_path = getenv("PATH");
+	const char *exec_path = perf_exec_path();
+
+	if (exec_path) {
+		list_commands_in_dir(main_cmds, exec_path, prefix);
+		qsort(main_cmds->names, main_cmds->cnt,
+		      sizeof(*main_cmds->names), cmdname_compare);
+		uniq(main_cmds);
+	}
+
+	if (env_path) {
+		char *paths, *path, *colon;
+		path = paths = strdup(env_path);
+		while (1) {
+			if ((colon = strchr(path, PATH_SEP)))
+				*colon = 0;
+			if (!exec_path || strcmp(path, exec_path))
+				list_commands_in_dir(other_cmds, path, prefix);
+
+			if (!colon)
+				break;
+			path = colon + 1;
+		}
+		free(paths);
+
+		qsort(other_cmds->names, other_cmds->cnt,
+		      sizeof(*other_cmds->names), cmdname_compare);
+		uniq(other_cmds);
+	}
+	exclude_cmds(other_cmds, main_cmds);
+}
+
+void list_commands(const char *title, struct cmdnames *main_cmds,
+		   struct cmdnames *other_cmds)
+{
+	int i, longest = 0;
+
+	for (i = 0; i < main_cmds->cnt; i++)
+		if (longest < main_cmds->names[i]->len)
+			longest = main_cmds->names[i]->len;
+	for (i = 0; i < other_cmds->cnt; i++)
+		if (longest < other_cmds->names[i]->len)
+			longest = other_cmds->names[i]->len;
+
+	if (main_cmds->cnt) {
+		const char *exec_path = perf_exec_path();
+		printf("available %s in '%s'\n", title, exec_path);
+		printf("----------------");
+		mput_char('-', strlen(title) + strlen(exec_path));
+		putchar('\n');
+		pretty_print_string_list(main_cmds, longest);
+		putchar('\n');
+	}
+
+	if (other_cmds->cnt) {
+		printf("%s available from elsewhere on your $PATH\n", title);
+		printf("---------------------------------------");
+		mput_char('-', strlen(title));
+		putchar('\n');
+		pretty_print_string_list(other_cmds, longest);
+		putchar('\n');
+	}
+}
+
+int is_in_cmdlist(struct cmdnames *c, const char *s)
+{
+	int i;
+	for (i = 0; i < c->cnt; i++)
+		if (!strcmp(s, c->names[i]->name))
+			return 1;
+	return 0;
+}
+
+static int autocorrect;
+static struct cmdnames aliases;
+
+static int perf_unknown_cmd_config(const char *var, const char *value, void *cb)
+{
+	if (!strcmp(var, "help.autocorrect"))
+		autocorrect = perf_config_int(var,value);
+	/* Also use aliases for command lookup */
+	if (!prefixcmp(var, "alias."))
+		add_cmdname(&aliases, var + 6, strlen(var + 6));
+
+	return perf_default_config(var, value, cb);
+}
+
+static int levenshtein_compare(const void *p1, const void *p2)
+{
+	const struct cmdname *const *c1 = p1, *const *c2 = p2;
+	const char *s1 = (*c1)->name, *s2 = (*c2)->name;
+	int l1 = (*c1)->len;
+	int l2 = (*c2)->len;
+	return l1 != l2 ? l1 - l2 : strcmp(s1, s2);
+}
+
+static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old)
+{
+	int i;
+	ALLOC_GROW(cmds->names, cmds->cnt + old->cnt, cmds->alloc);
+
+	for (i = 0; i < old->cnt; i++)
+		cmds->names[cmds->cnt++] = old->names[i];
+	free(old->names);
+	old->cnt = 0;
+	old->names = NULL;
+}
+
+const char *help_unknown_cmd(const char *cmd)
+{
+	int i, n = 0, best_similarity = 0;
+	struct cmdnames main_cmds, other_cmds;
+
+	memset(&main_cmds, 0, sizeof(main_cmds));
+	memset(&other_cmds, 0, sizeof(main_cmds));
+	memset(&aliases, 0, sizeof(aliases));
+
+	perf_config(perf_unknown_cmd_config, NULL);
+
+	load_command_list("perf-", &main_cmds, &other_cmds);
+
+	add_cmd_list(&main_cmds, &aliases);
+	add_cmd_list(&main_cmds, &other_cmds);
+	qsort(main_cmds.names, main_cmds.cnt,
+	      sizeof(main_cmds.names), cmdname_compare);
+	uniq(&main_cmds);
+
+	if (main_cmds.cnt) {
+		/* This reuses cmdname->len for similarity index */
+		for (i = 0; i < main_cmds.cnt; ++i)
+			main_cmds.names[i]->len =
+				levenshtein(cmd, main_cmds.names[i]->name, 0, 2, 1, 4);
+
+		qsort(main_cmds.names, main_cmds.cnt,
+		      sizeof(*main_cmds.names), levenshtein_compare);
+
+		best_similarity = main_cmds.names[0]->len;
+		n = 1;
+		while (n < main_cmds.cnt && best_similarity == main_cmds.names[n]->len)
+			++n;
+	}
+
+	if (autocorrect && n == 1) {
+		const char *assumed = main_cmds.names[0]->name;
+
+		main_cmds.names[0] = NULL;
+		clean_cmdnames(&main_cmds);
+		fprintf(stderr, "WARNING: You called a Git program named '%s', "
+			"which does not exist.\n"
+			"Continuing under the assumption that you meant '%s'\n",
+			cmd, assumed);
+		if (autocorrect > 0) {
+			fprintf(stderr, "in %0.1f seconds automatically...\n",
+				(float)autocorrect/10.0);
+			poll(NULL, 0, autocorrect * 100);
+		}
+		return assumed;
+	}
+
+	fprintf(stderr, "perf: '%s' is not a perf-command. See 'perf --help'.\n", cmd);
+
+	if (main_cmds.cnt && best_similarity < 6) {
+		fprintf(stderr, "\nDid you mean %s?\n",
+			n < 2 ? "this": "one of these");
+
+		for (i = 0; i < n; i++)
+			fprintf(stderr, "\t%s\n", main_cmds.names[i]->name);
+	}
+
+	exit(1);
+}
+
+int cmd_version(int argc, const char **argv, const char *prefix)
+{
+	printf("perf version %s\n", perf_version_string);
+	return 0;
+}
diff --git a/tools/perf/util/help.h b/tools/perf/util/help.h
new file mode 100644
index 00000000000..56bc15406ff
--- /dev/null
+++ b/tools/perf/util/help.h
@@ -0,0 +1,29 @@
+#ifndef HELP_H
+#define HELP_H
+
+struct cmdnames {
+	int alloc;
+	int cnt;
+	struct cmdname {
+		size_t len; /* also used for similarity index in help.c */
+		char name[FLEX_ARRAY];
+	} **names;
+};
+
+static inline void mput_char(char c, unsigned int num)
+{
+	while(num--)
+		putchar(c);
+}
+
+void load_command_list(const char *prefix,
+		struct cmdnames *main_cmds,
+		struct cmdnames *other_cmds);
+void add_cmdname(struct cmdnames *cmds, const char *name, int len);
+/* Here we require that excludes is a sorted list. */
+void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes);
+int is_in_cmdlist(struct cmdnames *c, const char *s);
+void list_commands(const char *title, struct cmdnames *main_cmds,
+		   struct cmdnames *other_cmds);
+
+#endif /* HELP_H */
diff --git a/tools/perf/util/levenshtein.c b/tools/perf/util/levenshtein.c
new file mode 100644
index 00000000000..e521d1516df
--- /dev/null
+++ b/tools/perf/util/levenshtein.c
@@ -0,0 +1,84 @@
+#include "cache.h"
+#include "levenshtein.h"
+
+/*
+ * This function implements the Damerau-Levenshtein algorithm to
+ * calculate a distance between strings.
+ *
+ * Basically, it says how many letters need to be swapped, substituted,
+ * deleted from, or added to string1, at least, to get string2.
+ *
+ * The idea is to build a distance matrix for the substrings of both
+ * strings.  To avoid a large space complexity, only the last three rows
+ * are kept in memory (if swaps had the same or higher cost as one deletion
+ * plus one insertion, only two rows would be needed).
+ *
+ * At any stage, "i + 1" denotes the length of the current substring of
+ * string1 that the distance is calculated for.
+ *
+ * row2 holds the current row, row1 the previous row (i.e. for the substring
+ * of string1 of length "i"), and row0 the row before that.
+ *
+ * In other words, at the start of the big loop, row2[j + 1] contains the
+ * Damerau-Levenshtein distance between the substring of string1 of length
+ * "i" and the substring of string2 of length "j + 1".
+ *
+ * All the big loop does is determine the partial minimum-cost paths.
+ *
+ * It does so by calculating the costs of the path ending in characters
+ * i (in string1) and j (in string2), respectively, given that the last
+ * operation is a substition, a swap, a deletion, or an insertion.
+ *
+ * This implementation allows the costs to be weighted:
+ *
+ * - w (as in "sWap")
+ * - s (as in "Substitution")
+ * - a (for insertion, AKA "Add")
+ * - d (as in "Deletion")
+ *
+ * Note that this algorithm calculates a distance _iff_ d == a.
+ */
+int levenshtein(const char *string1, const char *string2,
+		int w, int s, int a, int d)
+{
+	int len1 = strlen(string1), len2 = strlen(string2);
+	int *row0 = malloc(sizeof(int) * (len2 + 1));
+	int *row1 = malloc(sizeof(int) * (len2 + 1));
+	int *row2 = malloc(sizeof(int) * (len2 + 1));
+	int i, j;
+
+	for (j = 0; j <= len2; j++)
+		row1[j] = j * a;
+	for (i = 0; i < len1; i++) {
+		int *dummy;
+
+		row2[0] = (i + 1) * d;
+		for (j = 0; j < len2; j++) {
+			/* substitution */
+			row2[j + 1] = row1[j] + s * (string1[i] != string2[j]);
+			/* swap */
+			if (i > 0 && j > 0 && string1[i - 1] == string2[j] &&
+					string1[i] == string2[j - 1] &&
+					row2[j + 1] > row0[j - 1] + w)
+				row2[j + 1] = row0[j - 1] + w;
+			/* deletion */
+			if (row2[j + 1] > row1[j + 1] + d)
+				row2[j + 1] = row1[j + 1] + d;
+			/* insertion */
+			if (row2[j + 1] > row2[j] + a)
+				row2[j + 1] = row2[j] + a;
+		}
+
+		dummy = row0;
+		row0 = row1;
+		row1 = row2;
+		row2 = dummy;
+	}
+
+	i = row1[len2];
+	free(row0);
+	free(row1);
+	free(row2);
+
+	return i;
+}
diff --git a/tools/perf/util/levenshtein.h b/tools/perf/util/levenshtein.h
new file mode 100644
index 00000000000..0173abeef52
--- /dev/null
+++ b/tools/perf/util/levenshtein.h
@@ -0,0 +1,8 @@
+#ifndef LEVENSHTEIN_H
+#define LEVENSHTEIN_H
+
+int levenshtein(const char *string1, const char *string2,
+	int swap_penalty, int substition_penalty,
+	int insertion_penalty, int deletion_penalty);
+
+#endif
diff --git a/tools/perf/util/list.h b/tools/perf/util/list.h
new file mode 100644
index 00000000000..e2548e8072c
--- /dev/null
+++ b/tools/perf/util/list.h
@@ -0,0 +1,603 @@
+#ifndef _LINUX_LIST_H
+#define _LINUX_LIST_H
+/*
+  Copyright (C) Cast of dozens, comes from the Linux kernel
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+*/
+
+#include <stddef.h>
+
+/*
+ * These are non-NULL pointers that will result in page faults
+ * under normal circumstances, used to verify that nobody uses
+ * non-initialized list entries.
+ */
+#define LIST_POISON1 ((void *)0x00100100)
+#define LIST_POISON2 ((void *)0x00200200)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+static inline void INIT_LIST_HEAD(struct list_head *list)
+{
+	list->next = list;
+	list->prev = list;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static inline void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->next = LIST_POISON1;
+	entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_del_range - deletes range of entries from list.
+ * @beging: first element in the range to delete from the list.
+ * @beging: first element in the range to delete from the list.
+ * Note: list_empty on the range of entries does not return true after this,
+ * the entries is in an undefined state.
+ */
+static inline void list_del_range(struct list_head *begin,
+				  struct list_head *end)
+{
+	begin->prev->next = end->next;
+	end->next->prev = begin->prev;
+}
+
+/**
+ * list_replace - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ * Note: if 'old' was empty, it will be overwritten.
+ */
+static inline void list_replace(struct list_head *old,
+				struct list_head *new)
+{
+	new->next = old->next;
+	new->next->prev = new;
+	new->prev = old->prev;
+	new->prev->next = new;
+}
+
+static inline void list_replace_init(struct list_head *old,
+					struct list_head *new)
+{
+	list_replace(old, new);
+	INIT_LIST_HEAD(old);
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static inline void list_del_init(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_move - delete from one list and add as another's head
+ * @list: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+        __list_del(list->prev, list->next);
+        list_add(list, head);
+}
+
+/**
+ * list_move_tail - delete from one list and add as another's tail
+ * @list: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void list_move_tail(struct list_head *list,
+				  struct list_head *head)
+{
+        __list_del(list->prev, list->next);
+        list_add_tail(list, head);
+}
+
+/**
+ * list_is_last - tests whether @list is the last entry in list @head
+ * @list: the entry to test
+ * @head: the head of the list
+ */
+static inline int list_is_last(const struct list_head *list,
+				const struct list_head *head)
+{
+	return list->next == head;
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+	return head->next == head;
+}
+
+/**
+ * list_empty_careful - tests whether a list is empty and not being modified
+ * @head: the list to test
+ *
+ * Description:
+ * tests whether a list is empty _and_ checks that no other CPU might be
+ * in the process of modifying either member (next or prev)
+ *
+ * NOTE: using list_empty_careful() without synchronization
+ * can only be safe if the only activity that can happen
+ * to the list entry is list_del_init(). Eg. it cannot be used
+ * if another CPU could re-list_add() it.
+ */
+static inline int list_empty_careful(const struct list_head *head)
+{
+	struct list_head *next = head->next;
+	return (next == head) && (next == head->prev);
+}
+
+static inline void __list_splice(struct list_head *list,
+				 struct list_head *head)
+{
+	struct list_head *first = list->next;
+	struct list_head *last = list->prev;
+	struct list_head *at = head->next;
+
+	first->prev = head;
+	head->next = first;
+
+	last->next = at;
+	at->prev = last;
+}
+
+/**
+ * list_splice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice(struct list_head *list, struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head);
+}
+
+/**
+ * list_splice_init - join two lists and reinitialise the emptied list.
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_init(struct list_head *list,
+				    struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+/**
+ * list_first_entry - get the first element from a list
+ * @ptr:       the list head to take the element from.
+ * @type:      the type of the struct this is embedded in.
+ * @member:    the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_first_entry(ptr, type, member) \
+	list_entry((ptr)->next, type, member)
+
+/**
+ * list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); \
+        	pos = pos->next)
+
+/**
+ * __list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ *
+ * This variant differs from list_for_each() in that it's the
+ * simplest possible list iteration code, no prefetching is done.
+ * Use this for code that knows the list to be very short (empty
+ * or 1 entry) most of the time.
+ */
+#define __list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_prev	-	iterate over a list backwards
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev(pos, head) \
+	for (pos = (head)->prev; pos != (head); \
+        	pos = pos->prev)
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+/**
+ * list_for_each_entry	-	iterate over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member)				\
+	for (pos = list_entry((head)->next, typeof(*pos), member);	\
+	     &pos->member != (head); 	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
+	     &pos->member != (head); 	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue
+ * @pos:	the type * to use as a start point
+ * @head:	the head of the list
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Prepares a pos entry for use as a start point in list_for_each_entry_continue.
+ */
+#define list_prepare_entry(pos, head, member) \
+	((pos) ? : list_entry(head, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue(pos, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_from - iterate over list of given type from the current point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type, continuing from current position.
+ */
+#define list_for_each_entry_from(pos, head, member) 			\
+	for (; &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_safe(pos, n, head, member)			\
+	for (pos = list_entry((head)->next, typeof(*pos), member),	\
+		n = list_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_continue
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type, continuing after current point,
+ * safe against removal of list entry.
+ */
+#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member), 		\
+		n = list_entry(pos->member.next, typeof(*pos), member);		\
+	     &pos->member != (head);						\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_from
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type from current point, safe against
+ * removal of list entry.
+ */
+#define list_for_each_entry_safe_from(pos, n, head, member) 			\
+	for (n = list_entry(pos->member.next, typeof(*pos), member);		\
+	     &pos->member != (head);						\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_reverse
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate backwards over list of given type, safe against removal
+ * of list entry.
+ */
+#define list_for_each_entry_safe_reverse(pos, n, head, member)		\
+	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
+		n = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
+
+/*
+ * Double linked lists with a single pointer list head.
+ * Mostly useful for hash tables where the two pointer list head is
+ * too wasteful.
+ * You lose the ability to access the tail in O(1).
+ */
+
+struct hlist_head {
+	struct hlist_node *first;
+};
+
+struct hlist_node {
+	struct hlist_node *next, **pprev;
+};
+
+#define HLIST_HEAD_INIT { .first = NULL }
+#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
+#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
+static inline void INIT_HLIST_NODE(struct hlist_node *h)
+{
+	h->next = NULL;
+	h->pprev = NULL;
+}
+
+static inline int hlist_unhashed(const struct hlist_node *h)
+{
+	return !h->pprev;
+}
+
+static inline int hlist_empty(const struct hlist_head *h)
+{
+	return !h->first;
+}
+
+static inline void __hlist_del(struct hlist_node *n)
+{
+	struct hlist_node *next = n->next;
+	struct hlist_node **pprev = n->pprev;
+	*pprev = next;
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_del(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_del_init(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		INIT_HLIST_NODE(n);
+	}
+}
+
+static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	h->first = n;
+	n->pprev = &h->first;
+}
+
+/* next must be != NULL */
+static inline void hlist_add_before(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	n->pprev = next->pprev;
+	n->next = next;
+	next->pprev = &n->next;
+	*(n->pprev) = n;
+}
+
+static inline void hlist_add_after(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	next->next = n->next;
+	n->next = next;
+	next->pprev = &n->next;
+
+	if(next->next)
+		next->next->pprev  = &next->next;
+}
+
+#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
+
+#define hlist_for_each(pos, head) \
+	for (pos = (head)->first; pos; \
+	     pos = pos->next)
+
+#define hlist_for_each_safe(pos, n, head) \
+	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
+	     pos = n)
+
+/**
+ * hlist_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry(tpos, pos, head, member)			 \
+	for (pos = (head)->first;					 \
+	     pos && 			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue(tpos, pos, member)		 \
+	for (pos = (pos)->next;						 \
+	     pos && 			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_from - iterate over a hlist continuing from current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_from(tpos, pos, member)			 \
+	for (; pos && 			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
+	for (pos = (head)->first;					 \
+	     pos && ({ n = pos->next; 1; }) && 				 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = n)
+
+#endif
diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c
new file mode 100644
index 00000000000..a28bccae545
--- /dev/null
+++ b/tools/perf/util/pager.c
@@ -0,0 +1,99 @@
+#include "cache.h"
+#include "run-command.h"
+#include "sigchain.h"
+
+/*
+ * This is split up from the rest of git so that we can do
+ * something different on Windows.
+ */
+
+static int spawned_pager;
+
+#ifndef __MINGW32__
+static void pager_preexec(void)
+{
+	/*
+	 * Work around bug in "less" by not starting it until we
+	 * have real input
+	 */
+	fd_set in;
+
+	FD_ZERO(&in);
+	FD_SET(0, &in);
+	select(1, &in, NULL, &in, NULL);
+
+	setenv("LESS", "FRSX", 0);
+}
+#endif
+
+static const char *pager_argv[] = { "sh", "-c", NULL, NULL };
+static struct child_process pager_process;
+
+static void wait_for_pager(void)
+{
+	fflush(stdout);
+	fflush(stderr);
+	/* signal EOF to pager */
+	close(1);
+	close(2);
+	finish_command(&pager_process);
+}
+
+static void wait_for_pager_signal(int signo)
+{
+	wait_for_pager();
+	sigchain_pop(signo);
+	raise(signo);
+}
+
+void setup_pager(void)
+{
+	const char *pager = getenv("PERF_PAGER");
+
+	if (!isatty(1))
+		return;
+	if (!pager) {
+		if (!pager_program)
+			perf_config(perf_default_config, NULL);
+		pager = pager_program;
+	}
+	if (!pager)
+		pager = getenv("PAGER");
+	if (!pager)
+		pager = "less";
+	else if (!*pager || !strcmp(pager, "cat"))
+		return;
+
+	spawned_pager = 1; /* means we are emitting to terminal */
+
+	/* spawn the pager */
+	pager_argv[2] = pager;
+	pager_process.argv = pager_argv;
+	pager_process.in = -1;
+#ifndef __MINGW32__
+	pager_process.preexec_cb = pager_preexec;
+#endif
+	if (start_command(&pager_process))
+		return;
+
+	/* original process continues, but writes to the pipe */
+	dup2(pager_process.in, 1);
+	if (isatty(2))
+		dup2(pager_process.in, 2);
+	close(pager_process.in);
+
+	/* this makes sure that the parent terminates after the pager */
+	sigchain_push_common(wait_for_pager_signal);
+	atexit(wait_for_pager);
+}
+
+int pager_in_use(void)
+{
+	const char *env;
+
+	if (spawned_pager)
+		return 1;
+
+	env = getenv("PERF_PAGER_IN_USE");
+	return env ? perf_config_bool("PERF_PAGER_IN_USE", env) : 0;
+}
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
new file mode 100644
index 00000000000..5a72586e1df
--- /dev/null
+++ b/tools/perf/util/parse-events.c
@@ -0,0 +1,316 @@
+
+#include "../perf.h"
+#include "util.h"
+#include "parse-options.h"
+#include "parse-events.h"
+#include "exec_cmd.h"
+#include "string.h"
+
+extern char *strcasestr(const char *haystack, const char *needle);
+
+int					nr_counters;
+
+struct perf_counter_attr		attrs[MAX_COUNTERS];
+
+struct event_symbol {
+	__u8	type;
+	__u64	config;
+	char	*symbol;
+};
+
+#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y
+#define CR(x, y) .type = PERF_TYPE_##x, .config = y
+
+static struct event_symbol event_symbols[] = {
+  { C(HARDWARE, HW_CPU_CYCLES),		"cpu-cycles",		},
+  { C(HARDWARE, HW_CPU_CYCLES),		"cycles",		},
+  { C(HARDWARE, HW_INSTRUCTIONS),	"instructions",		},
+  { C(HARDWARE, HW_CACHE_REFERENCES),	"cache-references",	},
+  { C(HARDWARE, HW_CACHE_MISSES),	"cache-misses",		},
+  { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions",	},
+  { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches",		},
+  { C(HARDWARE, HW_BRANCH_MISSES),	"branch-misses",	},
+  { C(HARDWARE, HW_BUS_CYCLES),		"bus-cycles",		},
+
+  { C(SOFTWARE, SW_CPU_CLOCK),		"cpu-clock",		},
+  { C(SOFTWARE, SW_TASK_CLOCK),		"task-clock",		},
+  { C(SOFTWARE, SW_PAGE_FAULTS),	"page-faults",		},
+  { C(SOFTWARE, SW_PAGE_FAULTS),	"faults",		},
+  { C(SOFTWARE, SW_PAGE_FAULTS_MIN),	"minor-faults",		},
+  { C(SOFTWARE, SW_PAGE_FAULTS_MAJ),	"major-faults",		},
+  { C(SOFTWARE, SW_CONTEXT_SWITCHES),	"context-switches",	},
+  { C(SOFTWARE, SW_CONTEXT_SWITCHES),	"cs",			},
+  { C(SOFTWARE, SW_CPU_MIGRATIONS),	"cpu-migrations",	},
+  { C(SOFTWARE, SW_CPU_MIGRATIONS),	"migrations",		},
+};
+
+#define __PERF_COUNTER_FIELD(config, name) \
+	((config & PERF_COUNTER_##name##_MASK) >> PERF_COUNTER_##name##_SHIFT)
+
+#define PERF_COUNTER_RAW(config)	__PERF_COUNTER_FIELD(config, RAW)
+#define PERF_COUNTER_CONFIG(config)	__PERF_COUNTER_FIELD(config, CONFIG)
+#define PERF_COUNTER_TYPE(config)	__PERF_COUNTER_FIELD(config, TYPE)
+#define PERF_COUNTER_ID(config)		__PERF_COUNTER_FIELD(config, EVENT)
+
+static char *hw_event_names[] = {
+	"cycles",
+	"instructions",
+	"cache-references",
+	"cache-misses",
+	"branches",
+	"branch-misses",
+	"bus-cycles",
+};
+
+static char *sw_event_names[] = {
+	"cpu-clock-ticks",
+	"task-clock-ticks",
+	"page-faults",
+	"context-switches",
+	"CPU-migrations",
+	"minor-faults",
+	"major-faults",
+};
+
+#define MAX_ALIASES 8
+
+static char *hw_cache [][MAX_ALIASES] = {
+	{ "L1-data"		, "l1-d", "l1d"					},
+	{ "L1-instruction"	, "l1-i", "l1i"					},
+	{ "L2"			, "l2"						},
+	{ "Data-TLB"		, "dtlb", "d-tlb"				},
+	{ "Instruction-TLB"	, "itlb", "i-tlb"				},
+	{ "Branch"		, "bpu" , "btb", "bpc"				},
+};
+
+static char *hw_cache_op [][MAX_ALIASES] = {
+	{ "Load"		, "read"					},
+	{ "Store"		, "write"					},
+	{ "Prefetch"		, "speculative-read", "speculative-load"	},
+};
+
+static char *hw_cache_result [][MAX_ALIASES] = {
+	{ "Reference"		, "ops", "access"				},
+	{ "Miss"								},
+};
+
+char *event_name(int counter)
+{
+	__u64 config = attrs[counter].config;
+	int type = attrs[counter].type;
+	static char buf[32];
+
+	if (attrs[counter].type == PERF_TYPE_RAW) {
+		sprintf(buf, "raw 0x%llx", config);
+		return buf;
+	}
+
+	switch (type) {
+	case PERF_TYPE_HARDWARE:
+		if (config < PERF_COUNT_HW_MAX)
+			return hw_event_names[config];
+		return "unknown-hardware";
+
+	case PERF_TYPE_HW_CACHE: {
+		__u8 cache_type, cache_op, cache_result;
+		static char name[100];
+
+		cache_type   = (config >>  0) & 0xff;
+		if (cache_type > PERF_COUNT_HW_CACHE_MAX)
+			return "unknown-ext-hardware-cache-type";
+
+		cache_op     = (config >>  8) & 0xff;
+		if (cache_op > PERF_COUNT_HW_CACHE_OP_MAX)
+			return "unknown-ext-hardware-cache-op";
+
+		cache_result = (config >> 16) & 0xff;
+		if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX)
+			return "unknown-ext-hardware-cache-result";
+
+		sprintf(name, "%s-Cache-%s-%ses",
+			hw_cache[cache_type][0],
+			hw_cache_op[cache_op][0],
+			hw_cache_result[cache_result][0]);
+
+		return name;
+	}
+
+	case PERF_TYPE_SOFTWARE:
+		if (config < PERF_COUNT_SW_MAX)
+			return sw_event_names[config];
+		return "unknown-software";
+
+	default:
+		break;
+	}
+
+	return "unknown";
+}
+
+static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size)
+{
+	int i, j;
+
+	for (i = 0; i < size; i++) {
+		for (j = 0; j < MAX_ALIASES; j++) {
+			if (!names[i][j])
+				break;
+			if (strcasestr(str, names[i][j]))
+				return i;
+		}
+	}
+
+	return -1;
+}
+
+static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr)
+{
+	int cache_type = -1, cache_op = 0, cache_result = 0;
+
+	cache_type = parse_aliases(str, hw_cache, PERF_COUNT_HW_CACHE_MAX);
+	/*
+	 * No fallback - if we cannot get a clear cache type
+	 * then bail out:
+	 */
+	if (cache_type == -1)
+		return -EINVAL;
+
+	cache_op = parse_aliases(str, hw_cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
+	/*
+	 * Fall back to reads:
+	 */
+	if (cache_op == -1)
+		cache_op = PERF_COUNT_HW_CACHE_OP_READ;
+
+	cache_result = parse_aliases(str, hw_cache_result,
+					PERF_COUNT_HW_CACHE_RESULT_MAX);
+	/*
+	 * Fall back to accesses:
+	 */
+	if (cache_result == -1)
+		cache_result = PERF_COUNT_HW_CACHE_RESULT_ACCESS;
+
+	attr->config = cache_type | (cache_op << 8) | (cache_result << 16);
+	attr->type = PERF_TYPE_HW_CACHE;
+
+	return 0;
+}
+
+/*
+ * Each event can have multiple symbolic names.
+ * Symbolic names are (almost) exactly matched.
+ */
+static int parse_event_symbols(const char *str, struct perf_counter_attr *attr)
+{
+	__u64 config, id;
+	int type;
+	unsigned int i;
+	const char *sep, *pstr;
+
+	if (str[0] == 'r' && hex2u64(str + 1, &config) > 0) {
+		attr->type = PERF_TYPE_RAW;
+		attr->config = config;
+
+		return 0;
+	}
+
+	pstr = str;
+	sep = strchr(pstr, ':');
+	if (sep) {
+		type = atoi(pstr);
+		pstr = sep + 1;
+		id = atoi(pstr);
+		sep = strchr(pstr, ':');
+		if (sep) {
+			pstr = sep + 1;
+			if (strchr(pstr, 'k'))
+				attr->exclude_user = 1;
+			if (strchr(pstr, 'u'))
+				attr->exclude_kernel = 1;
+		}
+		attr->type = type;
+		attr->config = id;
+
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
+		if (!strncmp(str, event_symbols[i].symbol,
+			     strlen(event_symbols[i].symbol))) {
+
+			attr->type = event_symbols[i].type;
+			attr->config = event_symbols[i].config;
+
+			return 0;
+		}
+	}
+
+	return parse_generic_hw_symbols(str, attr);
+}
+
+int parse_events(const struct option *opt, const char *str, int unset)
+{
+	struct perf_counter_attr attr;
+	int ret;
+
+	memset(&attr, 0, sizeof(attr));
+again:
+	if (nr_counters == MAX_COUNTERS)
+		return -1;
+
+	ret = parse_event_symbols(str, &attr);
+	if (ret < 0)
+		return ret;
+
+	attrs[nr_counters] = attr;
+	nr_counters++;
+
+	str = strstr(str, ",");
+	if (str) {
+		str++;
+		goto again;
+	}
+
+	return 0;
+}
+
+static const char * const event_type_descriptors[] = {
+	"",
+	"Hardware event",
+	"Software event",
+	"Tracepoint event",
+	"Hardware cache event",
+};
+
+/*
+ * Print the help text for the event symbols:
+ */
+void print_events(void)
+{
+	struct event_symbol *syms = event_symbols;
+	unsigned int i, type, prev_type = -1;
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, "List of pre-defined events (to be used in -e):\n");
+
+	for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
+		type = syms->type + 1;
+		if (type > ARRAY_SIZE(event_type_descriptors))
+			type = 0;
+
+		if (type != prev_type)
+			fprintf(stderr, "\n");
+
+		fprintf(stderr, "  %-30s [%s]\n", syms->symbol,
+			event_type_descriptors[type]);
+
+		prev_type = type;
+	}
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, "  %-30s [raw hardware event descriptor]\n",
+		"rNNN");
+	fprintf(stderr, "\n");
+
+	exit(129);
+}
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
new file mode 100644
index 00000000000..e3d552908e6
--- /dev/null
+++ b/tools/perf/util/parse-events.h
@@ -0,0 +1,17 @@
+
+/*
+ * Parse symbolic events/counts passed in as options:
+ */
+
+extern int			nr_counters;
+
+extern struct perf_counter_attr attrs[MAX_COUNTERS];
+
+extern char *event_name(int ctr);
+
+extern int parse_events(const struct option *opt, const char *str, int unset);
+
+#define EVENTS_HELP_MAX (128*1024)
+
+extern void print_events(void);
+
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
new file mode 100644
index 00000000000..b3affb1658d
--- /dev/null
+++ b/tools/perf/util/parse-options.c
@@ -0,0 +1,508 @@
+#include "util.h"
+#include "parse-options.h"
+#include "cache.h"
+
+#define OPT_SHORT 1
+#define OPT_UNSET 2
+
+static int opterror(const struct option *opt, const char *reason, int flags)
+{
+	if (flags & OPT_SHORT)
+		return error("switch `%c' %s", opt->short_name, reason);
+	if (flags & OPT_UNSET)
+		return error("option `no-%s' %s", opt->long_name, reason);
+	return error("option `%s' %s", opt->long_name, reason);
+}
+
+static int get_arg(struct parse_opt_ctx_t *p, const struct option *opt,
+		   int flags, const char **arg)
+{
+	if (p->opt) {
+		*arg = p->opt;
+		p->opt = NULL;
+	} else if (p->argc == 1 && (opt->flags & PARSE_OPT_LASTARG_DEFAULT)) {
+		*arg = (const char *)opt->defval;
+	} else if (p->argc > 1) {
+		p->argc--;
+		*arg = *++p->argv;
+	} else
+		return opterror(opt, "requires a value", flags);
+	return 0;
+}
+
+static int get_value(struct parse_opt_ctx_t *p,
+		     const struct option *opt, int flags)
+{
+	const char *s, *arg = NULL;
+	const int unset = flags & OPT_UNSET;
+
+	if (unset && p->opt)
+		return opterror(opt, "takes no value", flags);
+	if (unset && (opt->flags & PARSE_OPT_NONEG))
+		return opterror(opt, "isn't available", flags);
+
+	if (!(flags & OPT_SHORT) && p->opt) {
+		switch (opt->type) {
+		case OPTION_CALLBACK:
+			if (!(opt->flags & PARSE_OPT_NOARG))
+				break;
+			/* FALLTHROUGH */
+		case OPTION_BOOLEAN:
+		case OPTION_BIT:
+		case OPTION_SET_INT:
+		case OPTION_SET_PTR:
+			return opterror(opt, "takes no value", flags);
+		default:
+			break;
+		}
+	}
+
+	switch (opt->type) {
+	case OPTION_BIT:
+		if (unset)
+			*(int *)opt->value &= ~opt->defval;
+		else
+			*(int *)opt->value |= opt->defval;
+		return 0;
+
+	case OPTION_BOOLEAN:
+		*(int *)opt->value = unset ? 0 : *(int *)opt->value + 1;
+		return 0;
+
+	case OPTION_SET_INT:
+		*(int *)opt->value = unset ? 0 : opt->defval;
+		return 0;
+
+	case OPTION_SET_PTR:
+		*(void **)opt->value = unset ? NULL : (void *)opt->defval;
+		return 0;
+
+	case OPTION_STRING:
+		if (unset)
+			*(const char **)opt->value = NULL;
+		else if (opt->flags & PARSE_OPT_OPTARG && !p->opt)
+			*(const char **)opt->value = (const char *)opt->defval;
+		else
+			return get_arg(p, opt, flags, (const char **)opt->value);
+		return 0;
+
+	case OPTION_CALLBACK:
+		if (unset)
+			return (*opt->callback)(opt, NULL, 1) ? (-1) : 0;
+		if (opt->flags & PARSE_OPT_NOARG)
+			return (*opt->callback)(opt, NULL, 0) ? (-1) : 0;
+		if (opt->flags & PARSE_OPT_OPTARG && !p->opt)
+			return (*opt->callback)(opt, NULL, 0) ? (-1) : 0;
+		if (get_arg(p, opt, flags, &arg))
+			return -1;
+		return (*opt->callback)(opt, arg, 0) ? (-1) : 0;
+
+	case OPTION_INTEGER:
+		if (unset) {
+			*(int *)opt->value = 0;
+			return 0;
+		}
+		if (opt->flags & PARSE_OPT_OPTARG && !p->opt) {
+			*(int *)opt->value = opt->defval;
+			return 0;
+		}
+		if (get_arg(p, opt, flags, &arg))
+			return -1;
+		*(int *)opt->value = strtol(arg, (char **)&s, 10);
+		if (*s)
+			return opterror(opt, "expects a numerical value", flags);
+		return 0;
+
+	case OPTION_LONG:
+		if (unset) {
+			*(long *)opt->value = 0;
+			return 0;
+		}
+		if (opt->flags & PARSE_OPT_OPTARG && !p->opt) {
+			*(long *)opt->value = opt->defval;
+			return 0;
+		}
+		if (get_arg(p, opt, flags, &arg))
+			return -1;
+		*(long *)opt->value = strtol(arg, (char **)&s, 10);
+		if (*s)
+			return opterror(opt, "expects a numerical value", flags);
+		return 0;
+
+	default:
+		die("should not happen, someone must be hit on the forehead");
+	}
+}
+
+static int parse_short_opt(struct parse_opt_ctx_t *p, const struct option *options)
+{
+	for (; options->type != OPTION_END; options++) {
+		if (options->short_name == *p->opt) {
+			p->opt = p->opt[1] ? p->opt + 1 : NULL;
+			return get_value(p, options, OPT_SHORT);
+		}
+	}
+	return -2;
+}
+
+static int parse_long_opt(struct parse_opt_ctx_t *p, const char *arg,
+                          const struct option *options)
+{
+	const char *arg_end = strchr(arg, '=');
+	const struct option *abbrev_option = NULL, *ambiguous_option = NULL;
+	int abbrev_flags = 0, ambiguous_flags = 0;
+
+	if (!arg_end)
+		arg_end = arg + strlen(arg);
+
+	for (; options->type != OPTION_END; options++) {
+		const char *rest;
+		int flags = 0;
+
+		if (!options->long_name)
+			continue;
+
+		rest = skip_prefix(arg, options->long_name);
+		if (options->type == OPTION_ARGUMENT) {
+			if (!rest)
+				continue;
+			if (*rest == '=')
+				return opterror(options, "takes no value", flags);
+			if (*rest)
+				continue;
+			p->out[p->cpidx++] = arg - 2;
+			return 0;
+		}
+		if (!rest) {
+			/* abbreviated? */
+			if (!strncmp(options->long_name, arg, arg_end - arg)) {
+is_abbreviated:
+				if (abbrev_option) {
+					/*
+					 * If this is abbreviated, it is
+					 * ambiguous. So when there is no
+					 * exact match later, we need to
+					 * error out.
+					 */
+					ambiguous_option = abbrev_option;
+					ambiguous_flags = abbrev_flags;
+				}
+				if (!(flags & OPT_UNSET) && *arg_end)
+					p->opt = arg_end + 1;
+				abbrev_option = options;
+				abbrev_flags = flags;
+				continue;
+			}
+			/* negated and abbreviated very much? */
+			if (!prefixcmp("no-", arg)) {
+				flags |= OPT_UNSET;
+				goto is_abbreviated;
+			}
+			/* negated? */
+			if (strncmp(arg, "no-", 3))
+				continue;
+			flags |= OPT_UNSET;
+			rest = skip_prefix(arg + 3, options->long_name);
+			/* abbreviated and negated? */
+			if (!rest && !prefixcmp(options->long_name, arg + 3))
+				goto is_abbreviated;
+			if (!rest)
+				continue;
+		}
+		if (*rest) {
+			if (*rest != '=')
+				continue;
+			p->opt = rest + 1;
+		}
+		return get_value(p, options, flags);
+	}
+
+	if (ambiguous_option)
+		return error("Ambiguous option: %s "
+			"(could be --%s%s or --%s%s)",
+			arg,
+			(ambiguous_flags & OPT_UNSET) ?  "no-" : "",
+			ambiguous_option->long_name,
+			(abbrev_flags & OPT_UNSET) ?  "no-" : "",
+			abbrev_option->long_name);
+	if (abbrev_option)
+		return get_value(p, abbrev_option, abbrev_flags);
+	return -2;
+}
+
+static void check_typos(const char *arg, const struct option *options)
+{
+	if (strlen(arg) < 3)
+		return;
+
+	if (!prefixcmp(arg, "no-")) {
+		error ("did you mean `--%s` (with two dashes ?)", arg);
+		exit(129);
+	}
+
+	for (; options->type != OPTION_END; options++) {
+		if (!options->long_name)
+			continue;
+		if (!prefixcmp(options->long_name, arg)) {
+			error ("did you mean `--%s` (with two dashes ?)", arg);
+			exit(129);
+		}
+	}
+}
+
+void parse_options_start(struct parse_opt_ctx_t *ctx,
+			 int argc, const char **argv, int flags)
+{
+	memset(ctx, 0, sizeof(*ctx));
+	ctx->argc = argc - 1;
+	ctx->argv = argv + 1;
+	ctx->out  = argv;
+	ctx->cpidx = ((flags & PARSE_OPT_KEEP_ARGV0) != 0);
+	ctx->flags = flags;
+	if ((flags & PARSE_OPT_KEEP_UNKNOWN) &&
+	    (flags & PARSE_OPT_STOP_AT_NON_OPTION))
+		die("STOP_AT_NON_OPTION and KEEP_UNKNOWN don't go together");
+}
+
+static int usage_with_options_internal(const char * const *,
+				       const struct option *, int);
+
+int parse_options_step(struct parse_opt_ctx_t *ctx,
+		       const struct option *options,
+		       const char * const usagestr[])
+{
+	int internal_help = !(ctx->flags & PARSE_OPT_NO_INTERNAL_HELP);
+
+	/* we must reset ->opt, unknown short option leave it dangling */
+	ctx->opt = NULL;
+
+	for (; ctx->argc; ctx->argc--, ctx->argv++) {
+		const char *arg = ctx->argv[0];
+
+		if (*arg != '-' || !arg[1]) {
+			if (ctx->flags & PARSE_OPT_STOP_AT_NON_OPTION)
+				break;
+			ctx->out[ctx->cpidx++] = ctx->argv[0];
+			continue;
+		}
+
+		if (arg[1] != '-') {
+			ctx->opt = arg + 1;
+			if (internal_help && *ctx->opt == 'h')
+				return parse_options_usage(usagestr, options);
+			switch (parse_short_opt(ctx, options)) {
+			case -1:
+				return parse_options_usage(usagestr, options);
+			case -2:
+				goto unknown;
+			}
+			if (ctx->opt)
+				check_typos(arg + 1, options);
+			while (ctx->opt) {
+				if (internal_help && *ctx->opt == 'h')
+					return parse_options_usage(usagestr, options);
+				switch (parse_short_opt(ctx, options)) {
+				case -1:
+					return parse_options_usage(usagestr, options);
+				case -2:
+					/* fake a short option thing to hide the fact that we may have
+					 * started to parse aggregated stuff
+					 *
+					 * This is leaky, too bad.
+					 */
+					ctx->argv[0] = strdup(ctx->opt - 1);
+					*(char *)ctx->argv[0] = '-';
+					goto unknown;
+				}
+			}
+			continue;
+		}
+
+		if (!arg[2]) { /* "--" */
+			if (!(ctx->flags & PARSE_OPT_KEEP_DASHDASH)) {
+				ctx->argc--;
+				ctx->argv++;
+			}
+			break;
+		}
+
+		if (internal_help && !strcmp(arg + 2, "help-all"))
+			return usage_with_options_internal(usagestr, options, 1);
+		if (internal_help && !strcmp(arg + 2, "help"))
+			return parse_options_usage(usagestr, options);
+		switch (parse_long_opt(ctx, arg + 2, options)) {
+		case -1:
+			return parse_options_usage(usagestr, options);
+		case -2:
+			goto unknown;
+		}
+		continue;
+unknown:
+		if (!(ctx->flags & PARSE_OPT_KEEP_UNKNOWN))
+			return PARSE_OPT_UNKNOWN;
+		ctx->out[ctx->cpidx++] = ctx->argv[0];
+		ctx->opt = NULL;
+	}
+	return PARSE_OPT_DONE;
+}
+
+int parse_options_end(struct parse_opt_ctx_t *ctx)
+{
+	memmove(ctx->out + ctx->cpidx, ctx->argv, ctx->argc * sizeof(*ctx->out));
+	ctx->out[ctx->cpidx + ctx->argc] = NULL;
+	return ctx->cpidx + ctx->argc;
+}
+
+int parse_options(int argc, const char **argv, const struct option *options,
+		  const char * const usagestr[], int flags)
+{
+	struct parse_opt_ctx_t ctx;
+
+	parse_options_start(&ctx, argc, argv, flags);
+	switch (parse_options_step(&ctx, options, usagestr)) {
+	case PARSE_OPT_HELP:
+		exit(129);
+	case PARSE_OPT_DONE:
+		break;
+	default: /* PARSE_OPT_UNKNOWN */
+		if (ctx.argv[0][1] == '-') {
+			error("unknown option `%s'", ctx.argv[0] + 2);
+		} else {
+			error("unknown switch `%c'", *ctx.opt);
+		}
+		usage_with_options(usagestr, options);
+	}
+
+	return parse_options_end(&ctx);
+}
+
+#define USAGE_OPTS_WIDTH 24
+#define USAGE_GAP         2
+
+int usage_with_options_internal(const char * const *usagestr,
+				const struct option *opts, int full)
+{
+	if (!usagestr)
+		return PARSE_OPT_HELP;
+
+	fprintf(stderr, "\n usage: %s\n", *usagestr++);
+	while (*usagestr && **usagestr)
+		fprintf(stderr, "    or: %s\n", *usagestr++);
+	while (*usagestr) {
+		fprintf(stderr, "%s%s\n",
+				**usagestr ? "    " : "",
+				*usagestr);
+		usagestr++;
+	}
+
+	if (opts->type != OPTION_GROUP)
+		fputc('\n', stderr);
+
+	for (; opts->type != OPTION_END; opts++) {
+		size_t pos;
+		int pad;
+
+		if (opts->type == OPTION_GROUP) {
+			fputc('\n', stderr);
+			if (*opts->help)
+				fprintf(stderr, "%s\n", opts->help);
+			continue;
+		}
+		if (!full && (opts->flags & PARSE_OPT_HIDDEN))
+			continue;
+
+		pos = fprintf(stderr, "    ");
+		if (opts->short_name)
+			pos += fprintf(stderr, "-%c", opts->short_name);
+		if (opts->long_name && opts->short_name)
+			pos += fprintf(stderr, ", ");
+		if (opts->long_name)
+			pos += fprintf(stderr, "--%s", opts->long_name);
+
+		switch (opts->type) {
+		case OPTION_ARGUMENT:
+			break;
+		case OPTION_INTEGER:
+			if (opts->flags & PARSE_OPT_OPTARG)
+				if (opts->long_name)
+					pos += fprintf(stderr, "[=<n>]");
+				else
+					pos += fprintf(stderr, "[<n>]");
+			else
+				pos += fprintf(stderr, " <n>");
+			break;
+		case OPTION_CALLBACK:
+			if (opts->flags & PARSE_OPT_NOARG)
+				break;
+			/* FALLTHROUGH */
+		case OPTION_STRING:
+			if (opts->argh) {
+				if (opts->flags & PARSE_OPT_OPTARG)
+					if (opts->long_name)
+						pos += fprintf(stderr, "[=<%s>]", opts->argh);
+					else
+						pos += fprintf(stderr, "[<%s>]", opts->argh);
+				else
+					pos += fprintf(stderr, " <%s>", opts->argh);
+			} else {
+				if (opts->flags & PARSE_OPT_OPTARG)
+					if (opts->long_name)
+						pos += fprintf(stderr, "[=...]");
+					else
+						pos += fprintf(stderr, "[...]");
+				else
+					pos += fprintf(stderr, " ...");
+			}
+			break;
+		default: /* OPTION_{BIT,BOOLEAN,SET_INT,SET_PTR} */
+			break;
+		}
+
+		if (pos <= USAGE_OPTS_WIDTH)
+			pad = USAGE_OPTS_WIDTH - pos;
+		else {
+			fputc('\n', stderr);
+			pad = USAGE_OPTS_WIDTH;
+		}
+		fprintf(stderr, "%*s%s\n", pad + USAGE_GAP, "", opts->help);
+	}
+	fputc('\n', stderr);
+
+	return PARSE_OPT_HELP;
+}
+
+void usage_with_options(const char * const *usagestr,
+			const struct option *opts)
+{
+	usage_with_options_internal(usagestr, opts, 0);
+	exit(129);
+}
+
+int parse_options_usage(const char * const *usagestr,
+			const struct option *opts)
+{
+	return usage_with_options_internal(usagestr, opts, 0);
+}
+
+
+int parse_opt_verbosity_cb(const struct option *opt, const char *arg,
+			   int unset)
+{
+	int *target = opt->value;
+
+	if (unset)
+		/* --no-quiet, --no-verbose */
+		*target = 0;
+	else if (opt->short_name == 'v') {
+		if (*target >= 0)
+			(*target)++;
+		else
+			*target = 1;
+	} else {
+		if (*target <= 0)
+			(*target)--;
+		else
+			*target = -1;
+	}
+	return 0;
+}
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
new file mode 100644
index 00000000000..a1039a6ce0e
--- /dev/null
+++ b/tools/perf/util/parse-options.h
@@ -0,0 +1,174 @@
+#ifndef PARSE_OPTIONS_H
+#define PARSE_OPTIONS_H
+
+enum parse_opt_type {
+	/* special types */
+	OPTION_END,
+	OPTION_ARGUMENT,
+	OPTION_GROUP,
+	/* options with no arguments */
+	OPTION_BIT,
+	OPTION_BOOLEAN, /* _INCR would have been a better name */
+	OPTION_SET_INT,
+	OPTION_SET_PTR,
+	/* options with arguments (usually) */
+	OPTION_STRING,
+	OPTION_INTEGER,
+	OPTION_LONG,
+	OPTION_CALLBACK,
+};
+
+enum parse_opt_flags {
+	PARSE_OPT_KEEP_DASHDASH = 1,
+	PARSE_OPT_STOP_AT_NON_OPTION = 2,
+	PARSE_OPT_KEEP_ARGV0 = 4,
+	PARSE_OPT_KEEP_UNKNOWN = 8,
+	PARSE_OPT_NO_INTERNAL_HELP = 16,
+};
+
+enum parse_opt_option_flags {
+	PARSE_OPT_OPTARG  = 1,
+	PARSE_OPT_NOARG   = 2,
+	PARSE_OPT_NONEG   = 4,
+	PARSE_OPT_HIDDEN  = 8,
+	PARSE_OPT_LASTARG_DEFAULT = 16,
+};
+
+struct option;
+typedef int parse_opt_cb(const struct option *, const char *arg, int unset);
+
+/*
+ * `type`::
+ *   holds the type of the option, you must have an OPTION_END last in your
+ *   array.
+ *
+ * `short_name`::
+ *   the character to use as a short option name, '\0' if none.
+ *
+ * `long_name`::
+ *   the long option name, without the leading dashes, NULL if none.
+ *
+ * `value`::
+ *   stores pointers to the values to be filled.
+ *
+ * `argh`::
+ *   token to explain the kind of argument this option wants. Keep it
+ *   homogenous across the repository.
+ *
+ * `help`::
+ *   the short help associated to what the option does.
+ *   Must never be NULL (except for OPTION_END).
+ *   OPTION_GROUP uses this pointer to store the group header.
+ *
+ * `flags`::
+ *   mask of parse_opt_option_flags.
+ *   PARSE_OPT_OPTARG: says that the argument is optionnal (not for BOOLEANs)
+ *   PARSE_OPT_NOARG: says that this option takes no argument, for CALLBACKs
+ *   PARSE_OPT_NONEG: says that this option cannot be negated
+ *   PARSE_OPT_HIDDEN this option is skipped in the default usage, showed in
+ *                    the long one.
+ *
+ * `callback`::
+ *   pointer to the callback to use for OPTION_CALLBACK.
+ *
+ * `defval`::
+ *   default value to fill (*->value) with for PARSE_OPT_OPTARG.
+ *   OPTION_{BIT,SET_INT,SET_PTR} store the {mask,integer,pointer} to put in
+ *   the value when met.
+ *   CALLBACKS can use it like they want.
+ */
+struct option {
+	enum parse_opt_type type;
+	int short_name;
+	const char *long_name;
+	void *value;
+	const char *argh;
+	const char *help;
+
+	int flags;
+	parse_opt_cb *callback;
+	intptr_t defval;
+};
+
+#define OPT_END()                   { OPTION_END }
+#define OPT_ARGUMENT(l, h)          { OPTION_ARGUMENT, 0, (l), NULL, NULL, (h) }
+#define OPT_GROUP(h)                { OPTION_GROUP, 0, NULL, NULL, NULL, (h) }
+#define OPT_BIT(s, l, v, h, b)      { OPTION_BIT, (s), (l), (v), NULL, (h), 0, NULL, (b) }
+#define OPT_BOOLEAN(s, l, v, h)     { OPTION_BOOLEAN, (s), (l), (v), NULL, (h) }
+#define OPT_SET_INT(s, l, v, h, i)  { OPTION_SET_INT, (s), (l), (v), NULL, (h), 0, NULL, (i) }
+#define OPT_SET_PTR(s, l, v, h, p)  { OPTION_SET_PTR, (s), (l), (v), NULL, (h), 0, NULL, (p) }
+#define OPT_INTEGER(s, l, v, h)     { OPTION_INTEGER, (s), (l), (v), NULL, (h) }
+#define OPT_LONG(s, l, v, h)        { OPTION_LONG, (s), (l), (v), NULL, (h) }
+#define OPT_STRING(s, l, v, a, h)   { OPTION_STRING,  (s), (l), (v), (a), (h) }
+#define OPT_DATE(s, l, v, h) \
+	{ OPTION_CALLBACK, (s), (l), (v), "time",(h), 0, \
+	  parse_opt_approxidate_cb }
+#define OPT_CALLBACK(s, l, v, a, h, f) \
+	{ OPTION_CALLBACK, (s), (l), (v), (a), (h), 0, (f) }
+
+/* parse_options() will filter out the processed options and leave the
+ * non-option argments in argv[].
+ * Returns the number of arguments left in argv[].
+ */
+extern int parse_options(int argc, const char **argv,
+                         const struct option *options,
+                         const char * const usagestr[], int flags);
+
+extern NORETURN void usage_with_options(const char * const *usagestr,
+                                        const struct option *options);
+
+/*----- incremantal advanced APIs -----*/
+
+enum {
+	PARSE_OPT_HELP = -1,
+	PARSE_OPT_DONE,
+	PARSE_OPT_UNKNOWN,
+};
+
+/*
+ * It's okay for the caller to consume argv/argc in the usual way.
+ * Other fields of that structure are private to parse-options and should not
+ * be modified in any way.
+ */
+struct parse_opt_ctx_t {
+	const char **argv;
+	const char **out;
+	int argc, cpidx;
+	const char *opt;
+	int flags;
+};
+
+extern int parse_options_usage(const char * const *usagestr,
+			       const struct option *opts);
+
+extern void parse_options_start(struct parse_opt_ctx_t *ctx,
+				int argc, const char **argv, int flags);
+
+extern int parse_options_step(struct parse_opt_ctx_t *ctx,
+			      const struct option *options,
+			      const char * const usagestr[]);
+
+extern int parse_options_end(struct parse_opt_ctx_t *ctx);
+
+
+/*----- some often used options -----*/
+extern int parse_opt_abbrev_cb(const struct option *, const char *, int);
+extern int parse_opt_approxidate_cb(const struct option *, const char *, int);
+extern int parse_opt_verbosity_cb(const struct option *, const char *, int);
+
+#define OPT__VERBOSE(var)  OPT_BOOLEAN('v', "verbose", (var), "be verbose")
+#define OPT__QUIET(var)    OPT_BOOLEAN('q', "quiet",   (var), "be quiet")
+#define OPT__VERBOSITY(var) \
+	{ OPTION_CALLBACK, 'v', "verbose", (var), NULL, "be more verbose", \
+	  PARSE_OPT_NOARG, &parse_opt_verbosity_cb, 0 }, \
+	{ OPTION_CALLBACK, 'q', "quiet", (var), NULL, "be more quiet", \
+	  PARSE_OPT_NOARG, &parse_opt_verbosity_cb, 0 }
+#define OPT__DRY_RUN(var)  OPT_BOOLEAN('n', "dry-run", (var), "dry run")
+#define OPT__ABBREV(var)  \
+	{ OPTION_CALLBACK, 0, "abbrev", (var), "n", \
+	  "use <n> digits to display SHA-1s", \
+	  PARSE_OPT_OPTARG, &parse_opt_abbrev_cb, 0 }
+
+extern const char *parse_options_fix_filename(const char *prefix, const char *file);
+
+#endif
diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c
new file mode 100644
index 00000000000..a501a40dd2c
--- /dev/null
+++ b/tools/perf/util/path.c
@@ -0,0 +1,353 @@
+/*
+ * I'm tired of doing "vsnprintf()" etc just to open a
+ * file, so here's a "return static buffer with printf"
+ * interface for paths.
+ *
+ * It's obviously not thread-safe. Sue me. But it's quite
+ * useful for doing things like
+ *
+ *   f = open(mkpath("%s/%s.perf", base, name), O_RDONLY);
+ *
+ * which is what it's designed for.
+ */
+#include "cache.h"
+
+static char bad_path[] = "/bad-path/";
+/*
+ * Two hacks:
+ */
+
+static char *get_perf_dir(void)
+{
+	return ".";
+}
+
+size_t strlcpy(char *dest, const char *src, size_t size)
+{
+	size_t ret = strlen(src);
+
+	if (size) {
+		size_t len = (ret >= size) ? size - 1 : ret;
+		memcpy(dest, src, len);
+		dest[len] = '\0';
+	}
+	return ret;
+}
+
+
+static char *get_pathname(void)
+{
+	static char pathname_array[4][PATH_MAX];
+	static int index;
+	return pathname_array[3 & ++index];
+}
+
+static char *cleanup_path(char *path)
+{
+	/* Clean it up */
+	if (!memcmp(path, "./", 2)) {
+		path += 2;
+		while (*path == '/')
+			path++;
+	}
+	return path;
+}
+
+char *mksnpath(char *buf, size_t n, const char *fmt, ...)
+{
+	va_list args;
+	unsigned len;
+
+	va_start(args, fmt);
+	len = vsnprintf(buf, n, fmt, args);
+	va_end(args);
+	if (len >= n) {
+		strlcpy(buf, bad_path, n);
+		return buf;
+	}
+	return cleanup_path(buf);
+}
+
+static char *perf_vsnpath(char *buf, size_t n, const char *fmt, va_list args)
+{
+	const char *perf_dir = get_perf_dir();
+	size_t len;
+
+	len = strlen(perf_dir);
+	if (n < len + 1)
+		goto bad;
+	memcpy(buf, perf_dir, len);
+	if (len && !is_dir_sep(perf_dir[len-1]))
+		buf[len++] = '/';
+	len += vsnprintf(buf + len, n - len, fmt, args);
+	if (len >= n)
+		goto bad;
+	return cleanup_path(buf);
+bad:
+	strlcpy(buf, bad_path, n);
+	return buf;
+}
+
+char *perf_snpath(char *buf, size_t n, const char *fmt, ...)
+{
+	va_list args;
+	va_start(args, fmt);
+	(void)perf_vsnpath(buf, n, fmt, args);
+	va_end(args);
+	return buf;
+}
+
+char *perf_pathdup(const char *fmt, ...)
+{
+	char path[PATH_MAX];
+	va_list args;
+	va_start(args, fmt);
+	(void)perf_vsnpath(path, sizeof(path), fmt, args);
+	va_end(args);
+	return xstrdup(path);
+}
+
+char *mkpath(const char *fmt, ...)
+{
+	va_list args;
+	unsigned len;
+	char *pathname = get_pathname();
+
+	va_start(args, fmt);
+	len = vsnprintf(pathname, PATH_MAX, fmt, args);
+	va_end(args);
+	if (len >= PATH_MAX)
+		return bad_path;
+	return cleanup_path(pathname);
+}
+
+char *perf_path(const char *fmt, ...)
+{
+	const char *perf_dir = get_perf_dir();
+	char *pathname = get_pathname();
+	va_list args;
+	unsigned len;
+
+	len = strlen(perf_dir);
+	if (len > PATH_MAX-100)
+		return bad_path;
+	memcpy(pathname, perf_dir, len);
+	if (len && perf_dir[len-1] != '/')
+		pathname[len++] = '/';
+	va_start(args, fmt);
+	len += vsnprintf(pathname + len, PATH_MAX - len, fmt, args);
+	va_end(args);
+	if (len >= PATH_MAX)
+		return bad_path;
+	return cleanup_path(pathname);
+}
+
+
+/* perf_mkstemp() - create tmp file honoring TMPDIR variable */
+int perf_mkstemp(char *path, size_t len, const char *template)
+{
+	const char *tmp;
+	size_t n;
+
+	tmp = getenv("TMPDIR");
+	if (!tmp)
+		tmp = "/tmp";
+	n = snprintf(path, len, "%s/%s", tmp, template);
+	if (len <= n) {
+		errno = ENAMETOOLONG;
+		return -1;
+	}
+	return mkstemp(path);
+}
+
+
+const char *make_relative_path(const char *abs, const char *base)
+{
+	static char buf[PATH_MAX + 1];
+	int baselen;
+	if (!base)
+		return abs;
+	baselen = strlen(base);
+	if (prefixcmp(abs, base))
+		return abs;
+	if (abs[baselen] == '/')
+		baselen++;
+	else if (base[baselen - 1] != '/')
+		return abs;
+	strcpy(buf, abs + baselen);
+	return buf;
+}
+
+/*
+ * It is okay if dst == src, but they should not overlap otherwise.
+ *
+ * Performs the following normalizations on src, storing the result in dst:
+ * - Ensures that components are separated by '/' (Windows only)
+ * - Squashes sequences of '/'.
+ * - Removes "." components.
+ * - Removes ".." components, and the components the precede them.
+ * Returns failure (non-zero) if a ".." component appears as first path
+ * component anytime during the normalization. Otherwise, returns success (0).
+ *
+ * Note that this function is purely textual.  It does not follow symlinks,
+ * verify the existence of the path, or make any system calls.
+ */
+int normalize_path_copy(char *dst, const char *src)
+{
+	char *dst0;
+
+	if (has_dos_drive_prefix(src)) {
+		*dst++ = *src++;
+		*dst++ = *src++;
+	}
+	dst0 = dst;
+
+	if (is_dir_sep(*src)) {
+		*dst++ = '/';
+		while (is_dir_sep(*src))
+			src++;
+	}
+
+	for (;;) {
+		char c = *src;
+
+		/*
+		 * A path component that begins with . could be
+		 * special:
+		 * (1) "." and ends   -- ignore and terminate.
+		 * (2) "./"           -- ignore them, eat slash and continue.
+		 * (3) ".." and ends  -- strip one and terminate.
+		 * (4) "../"          -- strip one, eat slash and continue.
+		 */
+		if (c == '.') {
+			if (!src[1]) {
+				/* (1) */
+				src++;
+			} else if (is_dir_sep(src[1])) {
+				/* (2) */
+				src += 2;
+				while (is_dir_sep(*src))
+					src++;
+				continue;
+			} else if (src[1] == '.') {
+				if (!src[2]) {
+					/* (3) */
+					src += 2;
+					goto up_one;
+				} else if (is_dir_sep(src[2])) {
+					/* (4) */
+					src += 3;
+					while (is_dir_sep(*src))
+						src++;
+					goto up_one;
+				}
+			}
+		}
+
+		/* copy up to the next '/', and eat all '/' */
+		while ((c = *src++) != '\0' && !is_dir_sep(c))
+			*dst++ = c;
+		if (is_dir_sep(c)) {
+			*dst++ = '/';
+			while (is_dir_sep(c))
+				c = *src++;
+			src--;
+		} else if (!c)
+			break;
+		continue;
+
+	up_one:
+		/*
+		 * dst0..dst is prefix portion, and dst[-1] is '/';
+		 * go up one level.
+		 */
+		dst--;	/* go to trailing '/' */
+		if (dst <= dst0)
+			return -1;
+		/* Windows: dst[-1] cannot be backslash anymore */
+		while (dst0 < dst && dst[-1] != '/')
+			dst--;
+	}
+	*dst = '\0';
+	return 0;
+}
+
+/*
+ * path = Canonical absolute path
+ * prefix_list = Colon-separated list of absolute paths
+ *
+ * Determines, for each path in prefix_list, whether the "prefix" really
+ * is an ancestor directory of path.  Returns the length of the longest
+ * ancestor directory, excluding any trailing slashes, or -1 if no prefix
+ * is an ancestor.  (Note that this means 0 is returned if prefix_list is
+ * "/".) "/foo" is not considered an ancestor of "/foobar".  Directories
+ * are not considered to be their own ancestors.  path must be in a
+ * canonical form: empty components, or "." or ".." components are not
+ * allowed.  prefix_list may be null, which is like "".
+ */
+int longest_ancestor_length(const char *path, const char *prefix_list)
+{
+	char buf[PATH_MAX+1];
+	const char *ceil, *colon;
+	int len, max_len = -1;
+
+	if (prefix_list == NULL || !strcmp(path, "/"))
+		return -1;
+
+	for (colon = ceil = prefix_list; *colon; ceil = colon+1) {
+		for (colon = ceil; *colon && *colon != PATH_SEP; colon++);
+		len = colon - ceil;
+		if (len == 0 || len > PATH_MAX || !is_absolute_path(ceil))
+			continue;
+		strlcpy(buf, ceil, len+1);
+		if (normalize_path_copy(buf, buf) < 0)
+			continue;
+		len = strlen(buf);
+		if (len > 0 && buf[len-1] == '/')
+			buf[--len] = '\0';
+
+		if (!strncmp(path, buf, len) &&
+		    path[len] == '/' &&
+		    len > max_len) {
+			max_len = len;
+		}
+	}
+
+	return max_len;
+}
+
+/* strip arbitrary amount of directory separators at end of path */
+static inline int chomp_trailing_dir_sep(const char *path, int len)
+{
+	while (len && is_dir_sep(path[len - 1]))
+		len--;
+	return len;
+}
+
+/*
+ * If path ends with suffix (complete path components), returns the
+ * part before suffix (sans trailing directory separators).
+ * Otherwise returns NULL.
+ */
+char *strip_path_suffix(const char *path, const char *suffix)
+{
+	int path_len = strlen(path), suffix_len = strlen(suffix);
+
+	while (suffix_len) {
+		if (!path_len)
+			return NULL;
+
+		if (is_dir_sep(path[path_len - 1])) {
+			if (!is_dir_sep(suffix[suffix_len - 1]))
+				return NULL;
+			path_len = chomp_trailing_dir_sep(path, path_len);
+			suffix_len = chomp_trailing_dir_sep(suffix, suffix_len);
+		}
+		else if (path[--path_len] != suffix[--suffix_len])
+			return NULL;
+	}
+
+	if (path_len && !is_dir_sep(path[path_len - 1]))
+		return NULL;
+	return xstrndup(path, chomp_trailing_dir_sep(path, path_len));
+}
diff --git a/tools/perf/util/quote.c b/tools/perf/util/quote.c
new file mode 100644
index 00000000000..f18c5212bc9
--- /dev/null
+++ b/tools/perf/util/quote.c
@@ -0,0 +1,481 @@
+#include "cache.h"
+#include "quote.h"
+
+int quote_path_fully = 1;
+
+/* Help to copy the thing properly quoted for the shell safety.
+ * any single quote is replaced with '\'', any exclamation point
+ * is replaced with '\!', and the whole thing is enclosed in a
+ *
+ * E.g.
+ *  original     sq_quote     result
+ *  name     ==> name      ==> 'name'
+ *  a b      ==> a b       ==> 'a b'
+ *  a'b      ==> a'\''b    ==> 'a'\''b'
+ *  a!b      ==> a'\!'b    ==> 'a'\!'b'
+ */
+static inline int need_bs_quote(char c)
+{
+	return (c == '\'' || c == '!');
+}
+
+void sq_quote_buf(struct strbuf *dst, const char *src)
+{
+	char *to_free = NULL;
+
+	if (dst->buf == src)
+		to_free = strbuf_detach(dst, NULL);
+
+	strbuf_addch(dst, '\'');
+	while (*src) {
+		size_t len = strcspn(src, "'!");
+		strbuf_add(dst, src, len);
+		src += len;
+		while (need_bs_quote(*src)) {
+			strbuf_addstr(dst, "'\\");
+			strbuf_addch(dst, *src++);
+			strbuf_addch(dst, '\'');
+		}
+	}
+	strbuf_addch(dst, '\'');
+	free(to_free);
+}
+
+void sq_quote_print(FILE *stream, const char *src)
+{
+	char c;
+
+	fputc('\'', stream);
+	while ((c = *src++)) {
+		if (need_bs_quote(c)) {
+			fputs("'\\", stream);
+			fputc(c, stream);
+			fputc('\'', stream);
+		} else {
+			fputc(c, stream);
+		}
+	}
+	fputc('\'', stream);
+}
+
+void sq_quote_argv(struct strbuf *dst, const char** argv, size_t maxlen)
+{
+	int i;
+
+	/* Copy into destination buffer. */
+	strbuf_grow(dst, 255);
+	for (i = 0; argv[i]; ++i) {
+		strbuf_addch(dst, ' ');
+		sq_quote_buf(dst, argv[i]);
+		if (maxlen && dst->len > maxlen)
+			die("Too many or long arguments");
+	}
+}
+
+char *sq_dequote_step(char *arg, char **next)
+{
+	char *dst = arg;
+	char *src = arg;
+	char c;
+
+	if (*src != '\'')
+		return NULL;
+	for (;;) {
+		c = *++src;
+		if (!c)
+			return NULL;
+		if (c != '\'') {
+			*dst++ = c;
+			continue;
+		}
+		/* We stepped out of sq */
+		switch (*++src) {
+		case '\0':
+			*dst = 0;
+			if (next)
+				*next = NULL;
+			return arg;
+		case '\\':
+			c = *++src;
+			if (need_bs_quote(c) && *++src == '\'') {
+				*dst++ = c;
+				continue;
+			}
+		/* Fallthrough */
+		default:
+			if (!next || !isspace(*src))
+				return NULL;
+			do {
+				c = *++src;
+			} while (isspace(c));
+			*dst = 0;
+			*next = src;
+			return arg;
+		}
+	}
+}
+
+char *sq_dequote(char *arg)
+{
+	return sq_dequote_step(arg, NULL);
+}
+
+int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc)
+{
+	char *next = arg;
+
+	if (!*arg)
+		return 0;
+	do {
+		char *dequoted = sq_dequote_step(next, &next);
+		if (!dequoted)
+			return -1;
+		ALLOC_GROW(*argv, *nr + 1, *alloc);
+		(*argv)[(*nr)++] = dequoted;
+	} while (next);
+
+	return 0;
+}
+
+/* 1 means: quote as octal
+ * 0 means: quote as octal if (quote_path_fully)
+ * -1 means: never quote
+ * c: quote as "\\c"
+ */
+#define X8(x)   x, x, x, x, x, x, x, x
+#define X16(x)  X8(x), X8(x)
+static signed char const sq_lookup[256] = {
+	/*           0    1    2    3    4    5    6    7 */
+	/* 0x00 */   1,   1,   1,   1,   1,   1,   1, 'a',
+	/* 0x08 */ 'b', 't', 'n', 'v', 'f', 'r',   1,   1,
+	/* 0x10 */ X16(1),
+	/* 0x20 */  -1,  -1, '"',  -1,  -1,  -1,  -1,  -1,
+	/* 0x28 */ X16(-1), X16(-1), X16(-1),
+	/* 0x58 */  -1,  -1,  -1,  -1,'\\',  -1,  -1,  -1,
+	/* 0x60 */ X16(-1), X8(-1),
+	/* 0x78 */  -1,  -1,  -1,  -1,  -1,  -1,  -1,   1,
+	/* 0x80 */ /* set to 0 */
+};
+
+static inline int sq_must_quote(char c)
+{
+	return sq_lookup[(unsigned char)c] + quote_path_fully > 0;
+}
+
+/* returns the longest prefix not needing a quote up to maxlen if positive.
+   This stops at the first \0 because it's marked as a character needing an
+   escape */
+static size_t next_quote_pos(const char *s, ssize_t maxlen)
+{
+	size_t len;
+	if (maxlen < 0) {
+		for (len = 0; !sq_must_quote(s[len]); len++);
+	} else {
+		for (len = 0; len < maxlen && !sq_must_quote(s[len]); len++);
+	}
+	return len;
+}
+
+/*
+ * C-style name quoting.
+ *
+ * (1) if sb and fp are both NULL, inspect the input name and counts the
+ *     number of bytes that are needed to hold c_style quoted version of name,
+ *     counting the double quotes around it but not terminating NUL, and
+ *     returns it.
+ *     However, if name does not need c_style quoting, it returns 0.
+ *
+ * (2) if sb or fp are not NULL, it emits the c_style quoted version
+ *     of name, enclosed with double quotes if asked and needed only.
+ *     Return value is the same as in (1).
+ */
+static size_t quote_c_style_counted(const char *name, ssize_t maxlen,
+                                    struct strbuf *sb, FILE *fp, int no_dq)
+{
+#undef EMIT
+#define EMIT(c)                                 \
+	do {                                        \
+		if (sb) strbuf_addch(sb, (c));          \
+		if (fp) fputc((c), fp);                 \
+		count++;                                \
+	} while (0)
+#define EMITBUF(s, l)                           \
+	do {                                        \
+		int __ret;				\
+		if (sb) strbuf_add(sb, (s), (l));       \
+		if (fp) __ret = fwrite((s), (l), 1, fp);        \
+		count += (l);                           \
+	} while (0)
+
+	size_t len, count = 0;
+	const char *p = name;
+
+	for (;;) {
+		int ch;
+
+		len = next_quote_pos(p, maxlen);
+		if (len == maxlen || !p[len])
+			break;
+
+		if (!no_dq && p == name)
+			EMIT('"');
+
+		EMITBUF(p, len);
+		EMIT('\\');
+		p += len;
+		ch = (unsigned char)*p++;
+		if (sq_lookup[ch] >= ' ') {
+			EMIT(sq_lookup[ch]);
+		} else {
+			EMIT(((ch >> 6) & 03) + '0');
+			EMIT(((ch >> 3) & 07) + '0');
+			EMIT(((ch >> 0) & 07) + '0');
+		}
+	}
+
+	EMITBUF(p, len);
+	if (p == name)   /* no ending quote needed */
+		return 0;
+
+	if (!no_dq)
+		EMIT('"');
+	return count;
+}
+
+size_t quote_c_style(const char *name, struct strbuf *sb, FILE *fp, int nodq)
+{
+	return quote_c_style_counted(name, -1, sb, fp, nodq);
+}
+
+void quote_two_c_style(struct strbuf *sb, const char *prefix, const char *path, int nodq)
+{
+	if (quote_c_style(prefix, NULL, NULL, 0) ||
+	    quote_c_style(path, NULL, NULL, 0)) {
+		if (!nodq)
+			strbuf_addch(sb, '"');
+		quote_c_style(prefix, sb, NULL, 1);
+		quote_c_style(path, sb, NULL, 1);
+		if (!nodq)
+			strbuf_addch(sb, '"');
+	} else {
+		strbuf_addstr(sb, prefix);
+		strbuf_addstr(sb, path);
+	}
+}
+
+void write_name_quoted(const char *name, FILE *fp, int terminator)
+{
+	if (terminator) {
+		quote_c_style(name, NULL, fp, 0);
+	} else {
+		fputs(name, fp);
+	}
+	fputc(terminator, fp);
+}
+
+extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
+                                 const char *name, FILE *fp, int terminator)
+{
+	int needquote = 0;
+
+	if (terminator) {
+		needquote = next_quote_pos(pfx, pfxlen) < pfxlen
+			|| name[next_quote_pos(name, -1)];
+	}
+	if (needquote) {
+		fputc('"', fp);
+		quote_c_style_counted(pfx, pfxlen, NULL, fp, 1);
+		quote_c_style(name, NULL, fp, 1);
+		fputc('"', fp);
+	} else {
+		int ret;
+
+		ret = fwrite(pfx, pfxlen, 1, fp);
+		fputs(name, fp);
+	}
+	fputc(terminator, fp);
+}
+
+/* quote path as relative to the given prefix */
+char *quote_path_relative(const char *in, int len,
+			  struct strbuf *out, const char *prefix)
+{
+	int needquote;
+
+	if (len < 0)
+		len = strlen(in);
+
+	/* "../" prefix itself does not need quoting, but "in" might. */
+	needquote = next_quote_pos(in, len) < len;
+	strbuf_setlen(out, 0);
+	strbuf_grow(out, len);
+
+	if (needquote)
+		strbuf_addch(out, '"');
+	if (prefix) {
+		int off = 0;
+		while (prefix[off] && off < len && prefix[off] == in[off])
+			if (prefix[off] == '/') {
+				prefix += off + 1;
+				in += off + 1;
+				len -= off + 1;
+				off = 0;
+			} else
+				off++;
+
+		for (; *prefix; prefix++)
+			if (*prefix == '/')
+				strbuf_addstr(out, "../");
+	}
+
+	quote_c_style_counted (in, len, out, NULL, 1);
+
+	if (needquote)
+		strbuf_addch(out, '"');
+	if (!out->len)
+		strbuf_addstr(out, "./");
+
+	return out->buf;
+}
+
+/*
+ * C-style name unquoting.
+ *
+ * Quoted should point at the opening double quote.
+ * + Returns 0 if it was able to unquote the string properly, and appends the
+ *   result in the strbuf `sb'.
+ * + Returns -1 in case of error, and doesn't touch the strbuf. Though note
+ *   that this function will allocate memory in the strbuf, so calling
+ *   strbuf_release is mandatory whichever result unquote_c_style returns.
+ *
+ * Updates endp pointer to point at one past the ending double quote if given.
+ */
+int unquote_c_style(struct strbuf *sb, const char *quoted, const char **endp)
+{
+	size_t oldlen = sb->len, len;
+	int ch, ac;
+
+	if (*quoted++ != '"')
+		return -1;
+
+	for (;;) {
+		len = strcspn(quoted, "\"\\");
+		strbuf_add(sb, quoted, len);
+		quoted += len;
+
+		switch (*quoted++) {
+		  case '"':
+			if (endp)
+				*endp = quoted;
+			return 0;
+		  case '\\':
+			break;
+		  default:
+			goto error;
+		}
+
+		switch ((ch = *quoted++)) {
+		case 'a': ch = '\a'; break;
+		case 'b': ch = '\b'; break;
+		case 'f': ch = '\f'; break;
+		case 'n': ch = '\n'; break;
+		case 'r': ch = '\r'; break;
+		case 't': ch = '\t'; break;
+		case 'v': ch = '\v'; break;
+
+		case '\\': case '"':
+			break; /* verbatim */
+
+		/* octal values with first digit over 4 overflow */
+		case '0': case '1': case '2': case '3':
+					ac = ((ch - '0') << 6);
+			if ((ch = *quoted++) < '0' || '7' < ch)
+				goto error;
+					ac |= ((ch - '0') << 3);
+			if ((ch = *quoted++) < '0' || '7' < ch)
+				goto error;
+					ac |= (ch - '0');
+					ch = ac;
+					break;
+				default:
+			goto error;
+			}
+		strbuf_addch(sb, ch);
+		}
+
+  error:
+	strbuf_setlen(sb, oldlen);
+	return -1;
+}
+
+/* quoting as a string literal for other languages */
+
+void perl_quote_print(FILE *stream, const char *src)
+{
+	const char sq = '\'';
+	const char bq = '\\';
+	char c;
+
+	fputc(sq, stream);
+	while ((c = *src++)) {
+		if (c == sq || c == bq)
+			fputc(bq, stream);
+		fputc(c, stream);
+	}
+	fputc(sq, stream);
+}
+
+void python_quote_print(FILE *stream, const char *src)
+{
+	const char sq = '\'';
+	const char bq = '\\';
+	const char nl = '\n';
+	char c;
+
+	fputc(sq, stream);
+	while ((c = *src++)) {
+		if (c == nl) {
+			fputc(bq, stream);
+			fputc('n', stream);
+			continue;
+		}
+		if (c == sq || c == bq)
+			fputc(bq, stream);
+		fputc(c, stream);
+	}
+	fputc(sq, stream);
+}
+
+void tcl_quote_print(FILE *stream, const char *src)
+{
+	char c;
+
+	fputc('"', stream);
+	while ((c = *src++)) {
+		switch (c) {
+		case '[': case ']':
+		case '{': case '}':
+		case '$': case '\\': case '"':
+			fputc('\\', stream);
+		default:
+			fputc(c, stream);
+			break;
+		case '\f':
+			fputs("\\f", stream);
+			break;
+		case '\r':
+			fputs("\\r", stream);
+			break;
+		case '\n':
+			fputs("\\n", stream);
+			break;
+		case '\t':
+			fputs("\\t", stream);
+			break;
+		case '\v':
+			fputs("\\v", stream);
+			break;
+		}
+	}
+	fputc('"', stream);
+}
diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h
new file mode 100644
index 00000000000..5dfad89816d
--- /dev/null
+++ b/tools/perf/util/quote.h
@@ -0,0 +1,68 @@
+#ifndef QUOTE_H
+#define QUOTE_H
+
+#include <stddef.h>
+#include <stdio.h>
+
+/* Help to copy the thing properly quoted for the shell safety.
+ * any single quote is replaced with '\'', any exclamation point
+ * is replaced with '\!', and the whole thing is enclosed in a
+ * single quote pair.
+ *
+ * For example, if you are passing the result to system() as an
+ * argument:
+ *
+ * sprintf(cmd, "foobar %s %s", sq_quote(arg0), sq_quote(arg1))
+ *
+ * would be appropriate.  If the system() is going to call ssh to
+ * run the command on the other side:
+ *
+ * sprintf(cmd, "git-diff-tree %s %s", sq_quote(arg0), sq_quote(arg1));
+ * sprintf(rcmd, "ssh %s %s", sq_util/quote.host), sq_quote(cmd));
+ *
+ * Note that the above examples leak memory!  Remember to free result from
+ * sq_quote() in a real application.
+ *
+ * sq_quote_buf() writes to an existing buffer of specified size; it
+ * will return the number of characters that would have been written
+ * excluding the final null regardless of the buffer size.
+ */
+
+extern void sq_quote_print(FILE *stream, const char *src);
+
+extern void sq_quote_buf(struct strbuf *, const char *src);
+extern void sq_quote_argv(struct strbuf *, const char **argv, size_t maxlen);
+
+/* This unwraps what sq_quote() produces in place, but returns
+ * NULL if the input does not look like what sq_quote would have
+ * produced.
+ */
+extern char *sq_dequote(char *);
+
+/*
+ * Same as the above, but can be used to unwrap many arguments in the
+ * same string separated by space. "next" is changed to point to the
+ * next argument that should be passed as first parameter. When there
+ * is no more argument to be dequoted, "next" is updated to point to NULL.
+ */
+extern char *sq_dequote_step(char *arg, char **next);
+extern int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc);
+
+extern int unquote_c_style(struct strbuf *, const char *quoted, const char **endp);
+extern size_t quote_c_style(const char *name, struct strbuf *, FILE *, int no_dq);
+extern void quote_two_c_style(struct strbuf *, const char *, const char *, int);
+
+extern void write_name_quoted(const char *name, FILE *, int terminator);
+extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
+                                 const char *name, FILE *, int terminator);
+
+/* quote path as relative to the given prefix */
+char *quote_path_relative(const char *in, int len,
+			  struct strbuf *out, const char *prefix);
+
+/* quoting as a string literal for other languages */
+extern void perl_quote_print(FILE *stream, const char *src);
+extern void python_quote_print(FILE *stream, const char *src);
+extern void tcl_quote_print(FILE *stream, const char *src);
+
+#endif
diff --git a/tools/perf/util/rbtree.c b/tools/perf/util/rbtree.c
new file mode 100644
index 00000000000..b15ba9c7cb3
--- /dev/null
+++ b/tools/perf/util/rbtree.c
@@ -0,0 +1,383 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+  (C) 2002  David Woodhouse <dwmw2@infradead.org>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/lib/rbtree.c
+*/
+
+#include "rbtree.h"
+
+static void __rb_rotate_left(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *right = node->rb_right;
+	struct rb_node *parent = rb_parent(node);
+
+	if ((node->rb_right = right->rb_left))
+		rb_set_parent(right->rb_left, node);
+	right->rb_left = node;
+
+	rb_set_parent(right, parent);
+
+	if (parent)
+	{
+		if (node == parent->rb_left)
+			parent->rb_left = right;
+		else
+			parent->rb_right = right;
+	}
+	else
+		root->rb_node = right;
+	rb_set_parent(node, right);
+}
+
+static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *left = node->rb_left;
+	struct rb_node *parent = rb_parent(node);
+
+	if ((node->rb_left = left->rb_right))
+		rb_set_parent(left->rb_right, node);
+	left->rb_right = node;
+
+	rb_set_parent(left, parent);
+
+	if (parent)
+	{
+		if (node == parent->rb_right)
+			parent->rb_right = left;
+		else
+			parent->rb_left = left;
+	}
+	else
+		root->rb_node = left;
+	rb_set_parent(node, left);
+}
+
+void rb_insert_color(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *parent, *gparent;
+
+	while ((parent = rb_parent(node)) && rb_is_red(parent))
+	{
+		gparent = rb_parent(parent);
+
+		if (parent == gparent->rb_left)
+		{
+			{
+				register struct rb_node *uncle = gparent->rb_right;
+				if (uncle && rb_is_red(uncle))
+				{
+					rb_set_black(uncle);
+					rb_set_black(parent);
+					rb_set_red(gparent);
+					node = gparent;
+					continue;
+				}
+			}
+
+			if (parent->rb_right == node)
+			{
+				register struct rb_node *tmp;
+				__rb_rotate_left(parent, root);
+				tmp = parent;
+				parent = node;
+				node = tmp;
+			}
+
+			rb_set_black(parent);
+			rb_set_red(gparent);
+			__rb_rotate_right(gparent, root);
+		} else {
+			{
+				register struct rb_node *uncle = gparent->rb_left;
+				if (uncle && rb_is_red(uncle))
+				{
+					rb_set_black(uncle);
+					rb_set_black(parent);
+					rb_set_red(gparent);
+					node = gparent;
+					continue;
+				}
+			}
+
+			if (parent->rb_left == node)
+			{
+				register struct rb_node *tmp;
+				__rb_rotate_right(parent, root);
+				tmp = parent;
+				parent = node;
+				node = tmp;
+			}
+
+			rb_set_black(parent);
+			rb_set_red(gparent);
+			__rb_rotate_left(gparent, root);
+		}
+	}
+
+	rb_set_black(root->rb_node);
+}
+
+static void __rb_erase_color(struct rb_node *node, struct rb_node *parent,
+			     struct rb_root *root)
+{
+	struct rb_node *other;
+
+	while ((!node || rb_is_black(node)) && node != root->rb_node)
+	{
+		if (parent->rb_left == node)
+		{
+			other = parent->rb_right;
+			if (rb_is_red(other))
+			{
+				rb_set_black(other);
+				rb_set_red(parent);
+				__rb_rotate_left(parent, root);
+				other = parent->rb_right;
+			}
+			if ((!other->rb_left || rb_is_black(other->rb_left)) &&
+			    (!other->rb_right || rb_is_black(other->rb_right)))
+			{
+				rb_set_red(other);
+				node = parent;
+				parent = rb_parent(node);
+			}
+			else
+			{
+				if (!other->rb_right || rb_is_black(other->rb_right))
+				{
+					rb_set_black(other->rb_left);
+					rb_set_red(other);
+					__rb_rotate_right(other, root);
+					other = parent->rb_right;
+				}
+				rb_set_color(other, rb_color(parent));
+				rb_set_black(parent);
+				rb_set_black(other->rb_right);
+				__rb_rotate_left(parent, root);
+				node = root->rb_node;
+				break;
+			}
+		}
+		else
+		{
+			other = parent->rb_left;
+			if (rb_is_red(other))
+			{
+				rb_set_black(other);
+				rb_set_red(parent);
+				__rb_rotate_right(parent, root);
+				other = parent->rb_left;
+			}
+			if ((!other->rb_left || rb_is_black(other->rb_left)) &&
+			    (!other->rb_right || rb_is_black(other->rb_right)))
+			{
+				rb_set_red(other);
+				node = parent;
+				parent = rb_parent(node);
+			}
+			else
+			{
+				if (!other->rb_left || rb_is_black(other->rb_left))
+				{
+					rb_set_black(other->rb_right);
+					rb_set_red(other);
+					__rb_rotate_left(other, root);
+					other = parent->rb_left;
+				}
+				rb_set_color(other, rb_color(parent));
+				rb_set_black(parent);
+				rb_set_black(other->rb_left);
+				__rb_rotate_right(parent, root);
+				node = root->rb_node;
+				break;
+			}
+		}
+	}
+	if (node)
+		rb_set_black(node);
+}
+
+void rb_erase(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *child, *parent;
+	int color;
+
+	if (!node->rb_left)
+		child = node->rb_right;
+	else if (!node->rb_right)
+		child = node->rb_left;
+	else
+	{
+		struct rb_node *old = node, *left;
+
+		node = node->rb_right;
+		while ((left = node->rb_left) != NULL)
+			node = left;
+		child = node->rb_right;
+		parent = rb_parent(node);
+		color = rb_color(node);
+
+		if (child)
+			rb_set_parent(child, parent);
+		if (parent == old) {
+			parent->rb_right = child;
+			parent = node;
+		} else
+			parent->rb_left = child;
+
+		node->rb_parent_color = old->rb_parent_color;
+		node->rb_right = old->rb_right;
+		node->rb_left = old->rb_left;
+
+		if (rb_parent(old))
+		{
+			if (rb_parent(old)->rb_left == old)
+				rb_parent(old)->rb_left = node;
+			else
+				rb_parent(old)->rb_right = node;
+		} else
+			root->rb_node = node;
+
+		rb_set_parent(old->rb_left, node);
+		if (old->rb_right)
+			rb_set_parent(old->rb_right, node);
+		goto color;
+	}
+
+	parent = rb_parent(node);
+	color = rb_color(node);
+
+	if (child)
+		rb_set_parent(child, parent);
+	if (parent)
+	{
+		if (parent->rb_left == node)
+			parent->rb_left = child;
+		else
+			parent->rb_right = child;
+	}
+	else
+		root->rb_node = child;
+
+ color:
+	if (color == RB_BLACK)
+		__rb_erase_color(child, parent, root);
+}
+
+/*
+ * This function returns the first node (in sort order) of the tree.
+ */
+struct rb_node *rb_first(const struct rb_root *root)
+{
+	struct rb_node	*n;
+
+	n = root->rb_node;
+	if (!n)
+		return NULL;
+	while (n->rb_left)
+		n = n->rb_left;
+	return n;
+}
+
+struct rb_node *rb_last(const struct rb_root *root)
+{
+	struct rb_node	*n;
+
+	n = root->rb_node;
+	if (!n)
+		return NULL;
+	while (n->rb_right)
+		n = n->rb_right;
+	return n;
+}
+
+struct rb_node *rb_next(const struct rb_node *node)
+{
+	struct rb_node *parent;
+
+	if (rb_parent(node) == node)
+		return NULL;
+
+	/* If we have a right-hand child, go down and then left as far
+	   as we can. */
+	if (node->rb_right) {
+		node = node->rb_right; 
+		while (node->rb_left)
+			node=node->rb_left;
+		return (struct rb_node *)node;
+	}
+
+	/* No right-hand children.  Everything down and left is
+	   smaller than us, so any 'next' node must be in the general
+	   direction of our parent. Go up the tree; any time the
+	   ancestor is a right-hand child of its parent, keep going
+	   up. First time it's a left-hand child of its parent, said
+	   parent is our 'next' node. */
+	while ((parent = rb_parent(node)) && node == parent->rb_right)
+		node = parent;
+
+	return parent;
+}
+
+struct rb_node *rb_prev(const struct rb_node *node)
+{
+	struct rb_node *parent;
+
+	if (rb_parent(node) == node)
+		return NULL;
+
+	/* If we have a left-hand child, go down and then right as far
+	   as we can. */
+	if (node->rb_left) {
+		node = node->rb_left; 
+		while (node->rb_right)
+			node=node->rb_right;
+		return (struct rb_node *)node;
+	}
+
+	/* No left-hand children. Go up till we find an ancestor which
+	   is a right-hand child of its parent */
+	while ((parent = rb_parent(node)) && node == parent->rb_left)
+		node = parent;
+
+	return parent;
+}
+
+void rb_replace_node(struct rb_node *victim, struct rb_node *new,
+		     struct rb_root *root)
+{
+	struct rb_node *parent = rb_parent(victim);
+
+	/* Set the surrounding nodes to point to the replacement */
+	if (parent) {
+		if (victim == parent->rb_left)
+			parent->rb_left = new;
+		else
+			parent->rb_right = new;
+	} else {
+		root->rb_node = new;
+	}
+	if (victim->rb_left)
+		rb_set_parent(victim->rb_left, new);
+	if (victim->rb_right)
+		rb_set_parent(victim->rb_right, new);
+
+	/* Copy the pointers/colour from the victim to the replacement */
+	*new = *victim;
+}
diff --git a/tools/perf/util/rbtree.h b/tools/perf/util/rbtree.h
new file mode 100644
index 00000000000..6bdc488a47f
--- /dev/null
+++ b/tools/perf/util/rbtree.h
@@ -0,0 +1,171 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/include/linux/rbtree.h
+
+  To use rbtrees you'll have to implement your own insert and search cores.
+  This will avoid us to use callbacks and to drop drammatically performances.
+  I know it's not the cleaner way,  but in C (not in C++) to get
+  performances and genericity...
+
+  Some example of insert and search follows here. The search is a plain
+  normal search over an ordered tree. The insert instead must be implemented
+  int two steps: as first thing the code must insert the element in
+  order as a red leaf in the tree, then the support library function
+  rb_insert_color() must be called. Such function will do the
+  not trivial work to rebalance the rbtree if necessary.
+
+-----------------------------------------------------------------------
+static inline struct page * rb_search_page_cache(struct inode * inode,
+						 unsigned long offset)
+{
+	struct rb_node * n = inode->i_rb_page_cache.rb_node;
+	struct page * page;
+
+	while (n)
+	{
+		page = rb_entry(n, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			n = n->rb_left;
+		else if (offset > page->offset)
+			n = n->rb_right;
+		else
+			return page;
+	}
+	return NULL;
+}
+
+static inline struct page * __rb_insert_page_cache(struct inode * inode,
+						   unsigned long offset,
+						   struct rb_node * node)
+{
+	struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
+	struct rb_node * parent = NULL;
+	struct page * page;
+
+	while (*p)
+	{
+		parent = *p;
+		page = rb_entry(parent, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			p = &(*p)->rb_left;
+		else if (offset > page->offset)
+			p = &(*p)->rb_right;
+		else
+			return page;
+	}
+
+	rb_link_node(node, parent, p);
+
+	return NULL;
+}
+
+static inline struct page * rb_insert_page_cache(struct inode * inode,
+						 unsigned long offset,
+						 struct rb_node * node)
+{
+	struct page * ret;
+	if ((ret = __rb_insert_page_cache(inode, offset, node)))
+		goto out;
+	rb_insert_color(node, &inode->i_rb_page_cache);
+ out:
+	return ret;
+}
+-----------------------------------------------------------------------
+*/
+
+#ifndef	_LINUX_RBTREE_H
+#define	_LINUX_RBTREE_H
+
+#include <stddef.h>
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+	(type *)( (char *)__mptr - offsetof(type,member) );})
+
+struct rb_node
+{
+	unsigned long  rb_parent_color;
+#define	RB_RED		0
+#define	RB_BLACK	1
+	struct rb_node *rb_right;
+	struct rb_node *rb_left;
+} __attribute__((aligned(sizeof(long))));
+    /* The alignment might seem pointless, but allegedly CRIS needs it */
+
+struct rb_root
+{
+	struct rb_node *rb_node;
+};
+
+
+#define rb_parent(r)   ((struct rb_node *)((r)->rb_parent_color & ~3))
+#define rb_color(r)   ((r)->rb_parent_color & 1)
+#define rb_is_red(r)   (!rb_color(r))
+#define rb_is_black(r) rb_color(r)
+#define rb_set_red(r)  do { (r)->rb_parent_color &= ~1; } while (0)
+#define rb_set_black(r)  do { (r)->rb_parent_color |= 1; } while (0)
+
+static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
+{
+	rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
+}
+static inline void rb_set_color(struct rb_node *rb, int color)
+{
+	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
+}
+
+#define RB_ROOT	(struct rb_root) { NULL, }
+#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
+
+#define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
+#define RB_EMPTY_NODE(node)	(rb_parent(node) == node)
+#define RB_CLEAR_NODE(node)	(rb_set_parent(node, node))
+
+extern void rb_insert_color(struct rb_node *, struct rb_root *);
+extern void rb_erase(struct rb_node *, struct rb_root *);
+
+/* Find logical next and previous nodes in a tree */
+extern struct rb_node *rb_next(const struct rb_node *);
+extern struct rb_node *rb_prev(const struct rb_node *);
+extern struct rb_node *rb_first(const struct rb_root *);
+extern struct rb_node *rb_last(const struct rb_root *);
+
+/* Fast replacement of a single node without remove/rebalance/add/rebalance */
+extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, 
+			    struct rb_root *root);
+
+static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
+				struct rb_node ** rb_link)
+{
+	node->rb_parent_color = (unsigned long )parent;
+	node->rb_left = node->rb_right = NULL;
+
+	*rb_link = node;
+}
+
+#endif	/* _LINUX_RBTREE_H */
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
new file mode 100644
index 00000000000..b2f5e854f40
--- /dev/null
+++ b/tools/perf/util/run-command.c
@@ -0,0 +1,395 @@
+#include "cache.h"
+#include "run-command.h"
+#include "exec_cmd.h"
+
+static inline void close_pair(int fd[2])
+{
+	close(fd[0]);
+	close(fd[1]);
+}
+
+static inline void dup_devnull(int to)
+{
+	int fd = open("/dev/null", O_RDWR);
+	dup2(fd, to);
+	close(fd);
+}
+
+int start_command(struct child_process *cmd)
+{
+	int need_in, need_out, need_err;
+	int fdin[2], fdout[2], fderr[2];
+
+	/*
+	 * In case of errors we must keep the promise to close FDs
+	 * that have been passed in via ->in and ->out.
+	 */
+
+	need_in = !cmd->no_stdin && cmd->in < 0;
+	if (need_in) {
+		if (pipe(fdin) < 0) {
+			if (cmd->out > 0)
+				close(cmd->out);
+			return -ERR_RUN_COMMAND_PIPE;
+		}
+		cmd->in = fdin[1];
+	}
+
+	need_out = !cmd->no_stdout
+		&& !cmd->stdout_to_stderr
+		&& cmd->out < 0;
+	if (need_out) {
+		if (pipe(fdout) < 0) {
+			if (need_in)
+				close_pair(fdin);
+			else if (cmd->in)
+				close(cmd->in);
+			return -ERR_RUN_COMMAND_PIPE;
+		}
+		cmd->out = fdout[0];
+	}
+
+	need_err = !cmd->no_stderr && cmd->err < 0;
+	if (need_err) {
+		if (pipe(fderr) < 0) {
+			if (need_in)
+				close_pair(fdin);
+			else if (cmd->in)
+				close(cmd->in);
+			if (need_out)
+				close_pair(fdout);
+			else if (cmd->out)
+				close(cmd->out);
+			return -ERR_RUN_COMMAND_PIPE;
+		}
+		cmd->err = fderr[0];
+	}
+
+#ifndef __MINGW32__
+	fflush(NULL);
+	cmd->pid = fork();
+	if (!cmd->pid) {
+		if (cmd->no_stdin)
+			dup_devnull(0);
+		else if (need_in) {
+			dup2(fdin[0], 0);
+			close_pair(fdin);
+		} else if (cmd->in) {
+			dup2(cmd->in, 0);
+			close(cmd->in);
+		}
+
+		if (cmd->no_stderr)
+			dup_devnull(2);
+		else if (need_err) {
+			dup2(fderr[1], 2);
+			close_pair(fderr);
+		}
+
+		if (cmd->no_stdout)
+			dup_devnull(1);
+		else if (cmd->stdout_to_stderr)
+			dup2(2, 1);
+		else if (need_out) {
+			dup2(fdout[1], 1);
+			close_pair(fdout);
+		} else if (cmd->out > 1) {
+			dup2(cmd->out, 1);
+			close(cmd->out);
+		}
+
+		if (cmd->dir && chdir(cmd->dir))
+			die("exec %s: cd to %s failed (%s)", cmd->argv[0],
+			    cmd->dir, strerror(errno));
+		if (cmd->env) {
+			for (; *cmd->env; cmd->env++) {
+				if (strchr(*cmd->env, '='))
+					putenv((char*)*cmd->env);
+				else
+					unsetenv(*cmd->env);
+			}
+		}
+		if (cmd->preexec_cb)
+			cmd->preexec_cb();
+		if (cmd->perf_cmd) {
+			execv_perf_cmd(cmd->argv);
+		} else {
+			execvp(cmd->argv[0], (char *const*) cmd->argv);
+		}
+		exit(127);
+	}
+#else
+	int s0 = -1, s1 = -1, s2 = -1;	/* backups of stdin, stdout, stderr */
+	const char **sargv = cmd->argv;
+	char **env = environ;
+
+	if (cmd->no_stdin) {
+		s0 = dup(0);
+		dup_devnull(0);
+	} else if (need_in) {
+		s0 = dup(0);
+		dup2(fdin[0], 0);
+	} else if (cmd->in) {
+		s0 = dup(0);
+		dup2(cmd->in, 0);
+	}
+
+	if (cmd->no_stderr) {
+		s2 = dup(2);
+		dup_devnull(2);
+	} else if (need_err) {
+		s2 = dup(2);
+		dup2(fderr[1], 2);
+	}
+
+	if (cmd->no_stdout) {
+		s1 = dup(1);
+		dup_devnull(1);
+	} else if (cmd->stdout_to_stderr) {
+		s1 = dup(1);
+		dup2(2, 1);
+	} else if (need_out) {
+		s1 = dup(1);
+		dup2(fdout[1], 1);
+	} else if (cmd->out > 1) {
+		s1 = dup(1);
+		dup2(cmd->out, 1);
+	}
+
+	if (cmd->dir)
+		die("chdir in start_command() not implemented");
+	if (cmd->env) {
+		env = copy_environ();
+		for (; *cmd->env; cmd->env++)
+			env = env_setenv(env, *cmd->env);
+	}
+
+	if (cmd->perf_cmd) {
+		cmd->argv = prepare_perf_cmd(cmd->argv);
+	}
+
+	cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env);
+
+	if (cmd->env)
+		free_environ(env);
+	if (cmd->perf_cmd)
+		free(cmd->argv);
+
+	cmd->argv = sargv;
+	if (s0 >= 0)
+		dup2(s0, 0), close(s0);
+	if (s1 >= 0)
+		dup2(s1, 1), close(s1);
+	if (s2 >= 0)
+		dup2(s2, 2), close(s2);
+#endif
+
+	if (cmd->pid < 0) {
+		int err = errno;
+		if (need_in)
+			close_pair(fdin);
+		else if (cmd->in)
+			close(cmd->in);
+		if (need_out)
+			close_pair(fdout);
+		else if (cmd->out)
+			close(cmd->out);
+		if (need_err)
+			close_pair(fderr);
+		return err == ENOENT ?
+			-ERR_RUN_COMMAND_EXEC :
+			-ERR_RUN_COMMAND_FORK;
+	}
+
+	if (need_in)
+		close(fdin[0]);
+	else if (cmd->in)
+		close(cmd->in);
+
+	if (need_out)
+		close(fdout[1]);
+	else if (cmd->out)
+		close(cmd->out);
+
+	if (need_err)
+		close(fderr[1]);
+
+	return 0;
+}
+
+static int wait_or_whine(pid_t pid)
+{
+	for (;;) {
+		int status, code;
+		pid_t waiting = waitpid(pid, &status, 0);
+
+		if (waiting < 0) {
+			if (errno == EINTR)
+				continue;
+			error("waitpid failed (%s)", strerror(errno));
+			return -ERR_RUN_COMMAND_WAITPID;
+		}
+		if (waiting != pid)
+			return -ERR_RUN_COMMAND_WAITPID_WRONG_PID;
+		if (WIFSIGNALED(status))
+			return -ERR_RUN_COMMAND_WAITPID_SIGNAL;
+
+		if (!WIFEXITED(status))
+			return -ERR_RUN_COMMAND_WAITPID_NOEXIT;
+		code = WEXITSTATUS(status);
+		switch (code) {
+		case 127:
+			return -ERR_RUN_COMMAND_EXEC;
+		case 0:
+			return 0;
+		default:
+			return -code;
+		}
+	}
+}
+
+int finish_command(struct child_process *cmd)
+{
+	return wait_or_whine(cmd->pid);
+}
+
+int run_command(struct child_process *cmd)
+{
+	int code = start_command(cmd);
+	if (code)
+		return code;
+	return finish_command(cmd);
+}
+
+static void prepare_run_command_v_opt(struct child_process *cmd,
+				      const char **argv,
+				      int opt)
+{
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->argv = argv;
+	cmd->no_stdin = opt & RUN_COMMAND_NO_STDIN ? 1 : 0;
+	cmd->perf_cmd = opt & RUN_PERF_CMD ? 1 : 0;
+	cmd->stdout_to_stderr = opt & RUN_COMMAND_STDOUT_TO_STDERR ? 1 : 0;
+}
+
+int run_command_v_opt(const char **argv, int opt)
+{
+	struct child_process cmd;
+	prepare_run_command_v_opt(&cmd, argv, opt);
+	return run_command(&cmd);
+}
+
+int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env)
+{
+	struct child_process cmd;
+	prepare_run_command_v_opt(&cmd, argv, opt);
+	cmd.dir = dir;
+	cmd.env = env;
+	return run_command(&cmd);
+}
+
+#ifdef __MINGW32__
+static __stdcall unsigned run_thread(void *data)
+{
+	struct async *async = data;
+	return async->proc(async->fd_for_proc, async->data);
+}
+#endif
+
+int start_async(struct async *async)
+{
+	int pipe_out[2];
+
+	if (pipe(pipe_out) < 0)
+		return error("cannot create pipe: %s", strerror(errno));
+	async->out = pipe_out[0];
+
+#ifndef __MINGW32__
+	/* Flush stdio before fork() to avoid cloning buffers */
+	fflush(NULL);
+
+	async->pid = fork();
+	if (async->pid < 0) {
+		error("fork (async) failed: %s", strerror(errno));
+		close_pair(pipe_out);
+		return -1;
+	}
+	if (!async->pid) {
+		close(pipe_out[0]);
+		exit(!!async->proc(pipe_out[1], async->data));
+	}
+	close(pipe_out[1]);
+#else
+	async->fd_for_proc = pipe_out[1];
+	async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
+	if (!async->tid) {
+		error("cannot create thread: %s", strerror(errno));
+		close_pair(pipe_out);
+		return -1;
+	}
+#endif
+	return 0;
+}
+
+int finish_async(struct async *async)
+{
+#ifndef __MINGW32__
+	int ret = 0;
+
+	if (wait_or_whine(async->pid))
+		ret = error("waitpid (async) failed");
+#else
+	DWORD ret = 0;
+	if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
+		ret = error("waiting for thread failed: %lu", GetLastError());
+	else if (!GetExitCodeThread(async->tid, &ret))
+		ret = error("cannot get thread exit code: %lu", GetLastError());
+	CloseHandle(async->tid);
+#endif
+	return ret;
+}
+
+int run_hook(const char *index_file, const char *name, ...)
+{
+	struct child_process hook;
+	const char **argv = NULL, *env[2];
+	char index[PATH_MAX];
+	va_list args;
+	int ret;
+	size_t i = 0, alloc = 0;
+
+	if (access(perf_path("hooks/%s", name), X_OK) < 0)
+		return 0;
+
+	va_start(args, name);
+	ALLOC_GROW(argv, i + 1, alloc);
+	argv[i++] = perf_path("hooks/%s", name);
+	while (argv[i-1]) {
+		ALLOC_GROW(argv, i + 1, alloc);
+		argv[i++] = va_arg(args, const char *);
+	}
+	va_end(args);
+
+	memset(&hook, 0, sizeof(hook));
+	hook.argv = argv;
+	hook.no_stdin = 1;
+	hook.stdout_to_stderr = 1;
+	if (index_file) {
+		snprintf(index, sizeof(index), "PERF_INDEX_FILE=%s", index_file);
+		env[0] = index;
+		env[1] = NULL;
+		hook.env = env;
+	}
+
+	ret = start_command(&hook);
+	free(argv);
+	if (ret) {
+		warning("Could not spawn %s", argv[0]);
+		return ret;
+	}
+	ret = finish_command(&hook);
+	if (ret == -ERR_RUN_COMMAND_WAITPID_SIGNAL)
+		warning("%s exited due to uncaught signal", argv[0]);
+
+	return ret;
+}
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
new file mode 100644
index 00000000000..328289f2366
--- /dev/null
+++ b/tools/perf/util/run-command.h
@@ -0,0 +1,93 @@
+#ifndef RUN_COMMAND_H
+#define RUN_COMMAND_H
+
+enum {
+	ERR_RUN_COMMAND_FORK = 10000,
+	ERR_RUN_COMMAND_EXEC,
+	ERR_RUN_COMMAND_PIPE,
+	ERR_RUN_COMMAND_WAITPID,
+	ERR_RUN_COMMAND_WAITPID_WRONG_PID,
+	ERR_RUN_COMMAND_WAITPID_SIGNAL,
+	ERR_RUN_COMMAND_WAITPID_NOEXIT,
+};
+#define IS_RUN_COMMAND_ERR(x) (-(x) >= ERR_RUN_COMMAND_FORK)
+
+struct child_process {
+	const char **argv;
+	pid_t pid;
+	/*
+	 * Using .in, .out, .err:
+	 * - Specify 0 for no redirections (child inherits stdin, stdout,
+	 *   stderr from parent).
+	 * - Specify -1 to have a pipe allocated as follows:
+	 *     .in: returns the writable pipe end; parent writes to it,
+	 *          the readable pipe end becomes child's stdin
+	 *     .out, .err: returns the readable pipe end; parent reads from
+	 *          it, the writable pipe end becomes child's stdout/stderr
+	 *   The caller of start_command() must close the returned FDs
+	 *   after it has completed reading from/writing to it!
+	 * - Specify > 0 to set a channel to a particular FD as follows:
+	 *     .in: a readable FD, becomes child's stdin
+	 *     .out: a writable FD, becomes child's stdout/stderr
+	 *     .err > 0 not supported
+	 *   The specified FD is closed by start_command(), even in case
+	 *   of errors!
+	 */
+	int in;
+	int out;
+	int err;
+	const char *dir;
+	const char *const *env;
+	unsigned no_stdin:1;
+	unsigned no_stdout:1;
+	unsigned no_stderr:1;
+	unsigned perf_cmd:1; /* if this is to be perf sub-command */
+	unsigned stdout_to_stderr:1;
+	void (*preexec_cb)(void);
+};
+
+int start_command(struct child_process *);
+int finish_command(struct child_process *);
+int run_command(struct child_process *);
+
+extern int run_hook(const char *index_file, const char *name, ...);
+
+#define RUN_COMMAND_NO_STDIN 1
+#define RUN_PERF_CMD	     2	/*If this is to be perf sub-command */
+#define RUN_COMMAND_STDOUT_TO_STDERR 4
+int run_command_v_opt(const char **argv, int opt);
+
+/*
+ * env (the environment) is to be formatted like environ: "VAR=VALUE".
+ * To unset an environment variable use just "VAR".
+ */
+int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env);
+
+/*
+ * The purpose of the following functions is to feed a pipe by running
+ * a function asynchronously and providing output that the caller reads.
+ *
+ * It is expected that no synchronization and mutual exclusion between
+ * the caller and the feed function is necessary so that the function
+ * can run in a thread without interfering with the caller.
+ */
+struct async {
+	/*
+	 * proc writes to fd and closes it;
+	 * returns 0 on success, non-zero on failure
+	 */
+	int (*proc)(int fd, void *data);
+	void *data;
+	int out;	/* caller reads from here and closes it */
+#ifndef __MINGW32__
+	pid_t pid;
+#else
+	HANDLE tid;
+	int fd_for_proc;
+#endif
+};
+
+int start_async(struct async *async);
+int finish_async(struct async *async);
+
+#endif
diff --git a/tools/perf/util/sigchain.c b/tools/perf/util/sigchain.c
new file mode 100644
index 00000000000..1118b99e57d
--- /dev/null
+++ b/tools/perf/util/sigchain.c
@@ -0,0 +1,52 @@
+#include "sigchain.h"
+#include "cache.h"
+
+#define SIGCHAIN_MAX_SIGNALS 32
+
+struct sigchain_signal {
+	sigchain_fun *old;
+	int n;
+	int alloc;
+};
+static struct sigchain_signal signals[SIGCHAIN_MAX_SIGNALS];
+
+static void check_signum(int sig)
+{
+	if (sig < 1 || sig >= SIGCHAIN_MAX_SIGNALS)
+		die("BUG: signal out of range: %d", sig);
+}
+
+int sigchain_push(int sig, sigchain_fun f)
+{
+	struct sigchain_signal *s = signals + sig;
+	check_signum(sig);
+
+	ALLOC_GROW(s->old, s->n + 1, s->alloc);
+	s->old[s->n] = signal(sig, f);
+	if (s->old[s->n] == SIG_ERR)
+		return -1;
+	s->n++;
+	return 0;
+}
+
+int sigchain_pop(int sig)
+{
+	struct sigchain_signal *s = signals + sig;
+	check_signum(sig);
+	if (s->n < 1)
+		return 0;
+
+	if (signal(sig, s->old[s->n - 1]) == SIG_ERR)
+		return -1;
+	s->n--;
+	return 0;
+}
+
+void sigchain_push_common(sigchain_fun f)
+{
+	sigchain_push(SIGINT, f);
+	sigchain_push(SIGHUP, f);
+	sigchain_push(SIGTERM, f);
+	sigchain_push(SIGQUIT, f);
+	sigchain_push(SIGPIPE, f);
+}
diff --git a/tools/perf/util/sigchain.h b/tools/perf/util/sigchain.h
new file mode 100644
index 00000000000..618083bce0c
--- /dev/null
+++ b/tools/perf/util/sigchain.h
@@ -0,0 +1,11 @@
+#ifndef SIGCHAIN_H
+#define SIGCHAIN_H
+
+typedef void (*sigchain_fun)(int);
+
+int sigchain_push(int sig, sigchain_fun f);
+int sigchain_pop(int sig);
+
+void sigchain_push_common(sigchain_fun f);
+
+#endif /* SIGCHAIN_H */
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
new file mode 100644
index 00000000000..eaba0930680
--- /dev/null
+++ b/tools/perf/util/strbuf.c
@@ -0,0 +1,359 @@
+#include "cache.h"
+
+int prefixcmp(const char *str, const char *prefix)
+{
+	for (; ; str++, prefix++)
+		if (!*prefix)
+			return 0;
+		else if (*str != *prefix)
+			return (unsigned char)*prefix - (unsigned char)*str;
+}
+
+/*
+ * Used as the default ->buf value, so that people can always assume
+ * buf is non NULL and ->buf is NUL terminated even for a freshly
+ * initialized strbuf.
+ */
+char strbuf_slopbuf[1];
+
+void strbuf_init(struct strbuf *sb, size_t hint)
+{
+	sb->alloc = sb->len = 0;
+	sb->buf = strbuf_slopbuf;
+	if (hint)
+		strbuf_grow(sb, hint);
+}
+
+void strbuf_release(struct strbuf *sb)
+{
+	if (sb->alloc) {
+		free(sb->buf);
+		strbuf_init(sb, 0);
+	}
+}
+
+char *strbuf_detach(struct strbuf *sb, size_t *sz)
+{
+	char *res = sb->alloc ? sb->buf : NULL;
+	if (sz)
+		*sz = sb->len;
+	strbuf_init(sb, 0);
+	return res;
+}
+
+void strbuf_attach(struct strbuf *sb, void *buf, size_t len, size_t alloc)
+{
+	strbuf_release(sb);
+	sb->buf   = buf;
+	sb->len   = len;
+	sb->alloc = alloc;
+	strbuf_grow(sb, 0);
+	sb->buf[sb->len] = '\0';
+}
+
+void strbuf_grow(struct strbuf *sb, size_t extra)
+{
+	if (sb->len + extra + 1 <= sb->len)
+		die("you want to use way too much memory");
+	if (!sb->alloc)
+		sb->buf = NULL;
+	ALLOC_GROW(sb->buf, sb->len + extra + 1, sb->alloc);
+}
+
+void strbuf_trim(struct strbuf *sb)
+{
+	char *b = sb->buf;
+	while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1]))
+		sb->len--;
+	while (sb->len > 0 && isspace(*b)) {
+		b++;
+		sb->len--;
+	}
+	memmove(sb->buf, b, sb->len);
+	sb->buf[sb->len] = '\0';
+}
+void strbuf_rtrim(struct strbuf *sb)
+{
+	while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1]))
+		sb->len--;
+	sb->buf[sb->len] = '\0';
+}
+
+void strbuf_ltrim(struct strbuf *sb)
+{
+	char *b = sb->buf;
+	while (sb->len > 0 && isspace(*b)) {
+		b++;
+		sb->len--;
+	}
+	memmove(sb->buf, b, sb->len);
+	sb->buf[sb->len] = '\0';
+}
+
+void strbuf_tolower(struct strbuf *sb)
+{
+	int i;
+	for (i = 0; i < sb->len; i++)
+		sb->buf[i] = tolower(sb->buf[i]);
+}
+
+struct strbuf **strbuf_split(const struct strbuf *sb, int delim)
+{
+	int alloc = 2, pos = 0;
+	char *n, *p;
+	struct strbuf **ret;
+	struct strbuf *t;
+
+	ret = calloc(alloc, sizeof(struct strbuf *));
+	p = n = sb->buf;
+	while (n < sb->buf + sb->len) {
+		int len;
+		n = memchr(n, delim, sb->len - (n - sb->buf));
+		if (pos + 1 >= alloc) {
+			alloc = alloc * 2;
+			ret = realloc(ret, sizeof(struct strbuf *) * alloc);
+		}
+		if (!n)
+			n = sb->buf + sb->len - 1;
+		len = n - p + 1;
+		t = malloc(sizeof(struct strbuf));
+		strbuf_init(t, len);
+		strbuf_add(t, p, len);
+		ret[pos] = t;
+		ret[++pos] = NULL;
+		p = ++n;
+	}
+	return ret;
+}
+
+void strbuf_list_free(struct strbuf **sbs)
+{
+	struct strbuf **s = sbs;
+
+	while (*s) {
+		strbuf_release(*s);
+		free(*s++);
+	}
+	free(sbs);
+}
+
+int strbuf_cmp(const struct strbuf *a, const struct strbuf *b)
+{
+	int len = a->len < b->len ? a->len: b->len;
+	int cmp = memcmp(a->buf, b->buf, len);
+	if (cmp)
+		return cmp;
+	return a->len < b->len ? -1: a->len != b->len;
+}
+
+void strbuf_splice(struct strbuf *sb, size_t pos, size_t len,
+				   const void *data, size_t dlen)
+{
+	if (pos + len < pos)
+		die("you want to use way too much memory");
+	if (pos > sb->len)
+		die("`pos' is too far after the end of the buffer");
+	if (pos + len > sb->len)
+		die("`pos + len' is too far after the end of the buffer");
+
+	if (dlen >= len)
+		strbuf_grow(sb, dlen - len);
+	memmove(sb->buf + pos + dlen,
+			sb->buf + pos + len,
+			sb->len - pos - len);
+	memcpy(sb->buf + pos, data, dlen);
+	strbuf_setlen(sb, sb->len + dlen - len);
+}
+
+void strbuf_insert(struct strbuf *sb, size_t pos, const void *data, size_t len)
+{
+	strbuf_splice(sb, pos, 0, data, len);
+}
+
+void strbuf_remove(struct strbuf *sb, size_t pos, size_t len)
+{
+	strbuf_splice(sb, pos, len, NULL, 0);
+}
+
+void strbuf_add(struct strbuf *sb, const void *data, size_t len)
+{
+	strbuf_grow(sb, len);
+	memcpy(sb->buf + sb->len, data, len);
+	strbuf_setlen(sb, sb->len + len);
+}
+
+void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len)
+{
+	strbuf_grow(sb, len);
+	memcpy(sb->buf + sb->len, sb->buf + pos, len);
+	strbuf_setlen(sb, sb->len + len);
+}
+
+void strbuf_addf(struct strbuf *sb, const char *fmt, ...)
+{
+	int len;
+	va_list ap;
+
+	if (!strbuf_avail(sb))
+		strbuf_grow(sb, 64);
+	va_start(ap, fmt);
+	len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
+	va_end(ap);
+	if (len < 0)
+		die("your vsnprintf is broken");
+	if (len > strbuf_avail(sb)) {
+		strbuf_grow(sb, len);
+		va_start(ap, fmt);
+		len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
+		va_end(ap);
+		if (len > strbuf_avail(sb)) {
+			die("this should not happen, your snprintf is broken");
+		}
+	}
+	strbuf_setlen(sb, sb->len + len);
+}
+
+void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn,
+		   void *context)
+{
+	for (;;) {
+		const char *percent;
+		size_t consumed;
+
+		percent = strchrnul(format, '%');
+		strbuf_add(sb, format, percent - format);
+		if (!*percent)
+			break;
+		format = percent + 1;
+
+		consumed = fn(sb, format, context);
+		if (consumed)
+			format += consumed;
+		else
+			strbuf_addch(sb, '%');
+	}
+}
+
+size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder,
+		void *context)
+{
+	struct strbuf_expand_dict_entry *e = context;
+	size_t len;
+
+	for (; e->placeholder && (len = strlen(e->placeholder)); e++) {
+		if (!strncmp(placeholder, e->placeholder, len)) {
+			if (e->value)
+				strbuf_addstr(sb, e->value);
+			return len;
+		}
+	}
+	return 0;
+}
+
+size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *f)
+{
+	size_t res;
+	size_t oldalloc = sb->alloc;
+
+	strbuf_grow(sb, size);
+	res = fread(sb->buf + sb->len, 1, size, f);
+	if (res > 0)
+		strbuf_setlen(sb, sb->len + res);
+	else if (res < 0 && oldalloc == 0)
+		strbuf_release(sb);
+	return res;
+}
+
+ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint)
+{
+	size_t oldlen = sb->len;
+	size_t oldalloc = sb->alloc;
+
+	strbuf_grow(sb, hint ? hint : 8192);
+	for (;;) {
+		ssize_t cnt;
+
+		cnt = read(fd, sb->buf + sb->len, sb->alloc - sb->len - 1);
+		if (cnt < 0) {
+			if (oldalloc == 0)
+				strbuf_release(sb);
+			else
+				strbuf_setlen(sb, oldlen);
+			return -1;
+		}
+		if (!cnt)
+			break;
+		sb->len += cnt;
+		strbuf_grow(sb, 8192);
+	}
+
+	sb->buf[sb->len] = '\0';
+	return sb->len - oldlen;
+}
+
+#define STRBUF_MAXLINK (2*PATH_MAX)
+
+int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint)
+{
+	size_t oldalloc = sb->alloc;
+
+	if (hint < 32)
+		hint = 32;
+
+	while (hint < STRBUF_MAXLINK) {
+		int len;
+
+		strbuf_grow(sb, hint);
+		len = readlink(path, sb->buf, hint);
+		if (len < 0) {
+			if (errno != ERANGE)
+				break;
+		} else if (len < hint) {
+			strbuf_setlen(sb, len);
+			return 0;
+		}
+
+		/* .. the buffer was too small - try again */
+		hint *= 2;
+	}
+	if (oldalloc == 0)
+		strbuf_release(sb);
+	return -1;
+}
+
+int strbuf_getline(struct strbuf *sb, FILE *fp, int term)
+{
+	int ch;
+
+	strbuf_grow(sb, 0);
+	if (feof(fp))
+		return EOF;
+
+	strbuf_reset(sb);
+	while ((ch = fgetc(fp)) != EOF) {
+		if (ch == term)
+			break;
+		strbuf_grow(sb, 1);
+		sb->buf[sb->len++] = ch;
+	}
+	if (ch == EOF && sb->len == 0)
+		return EOF;
+
+	sb->buf[sb->len] = '\0';
+	return 0;
+}
+
+int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint)
+{
+	int fd, len;
+
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		return -1;
+	len = strbuf_read(sb, fd, hint);
+	close(fd);
+	if (len < 0)
+		return -1;
+
+	return len;
+}
diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h
new file mode 100644
index 00000000000..9ee908a3ec5
--- /dev/null
+++ b/tools/perf/util/strbuf.h
@@ -0,0 +1,137 @@
+#ifndef STRBUF_H
+#define STRBUF_H
+
+/*
+ * Strbuf's can be use in many ways: as a byte array, or to store arbitrary
+ * long, overflow safe strings.
+ *
+ * Strbufs has some invariants that are very important to keep in mind:
+ *
+ * 1. the ->buf member is always malloc-ed, hence strbuf's can be used to
+ *    build complex strings/buffers whose final size isn't easily known.
+ *
+ *    It is NOT legal to copy the ->buf pointer away.
+ *    `strbuf_detach' is the operation that detachs a buffer from its shell
+ *    while keeping the shell valid wrt its invariants.
+ *
+ * 2. the ->buf member is a byte array that has at least ->len + 1 bytes
+ *    allocated. The extra byte is used to store a '\0', allowing the ->buf
+ *    member to be a valid C-string. Every strbuf function ensure this
+ *    invariant is preserved.
+ *
+ *    Note that it is OK to "play" with the buffer directly if you work it
+ *    that way:
+ *
+ *    strbuf_grow(sb, SOME_SIZE);
+ *       ... Here, the memory array starting at sb->buf, and of length
+ *       ... strbuf_avail(sb) is all yours, and you are sure that
+ *       ... strbuf_avail(sb) is at least SOME_SIZE.
+ *    strbuf_setlen(sb, sb->len + SOME_OTHER_SIZE);
+ *
+ *    Of course, SOME_OTHER_SIZE must be smaller or equal to strbuf_avail(sb).
+ *
+ *    Doing so is safe, though if it has to be done in many places, adding the
+ *    missing API to the strbuf module is the way to go.
+ *
+ *    XXX: do _not_ assume that the area that is yours is of size ->alloc - 1
+ *         even if it's true in the current implementation. Alloc is somehow a
+ *         "private" member that should not be messed with.
+ */
+
+#include <assert.h>
+
+extern char strbuf_slopbuf[];
+struct strbuf {
+	size_t alloc;
+	size_t len;
+	char *buf;
+};
+
+#define STRBUF_INIT  { 0, 0, strbuf_slopbuf }
+
+/*----- strbuf life cycle -----*/
+extern void strbuf_init(struct strbuf *, size_t);
+extern void strbuf_release(struct strbuf *);
+extern char *strbuf_detach(struct strbuf *, size_t *);
+extern void strbuf_attach(struct strbuf *, void *, size_t, size_t);
+static inline void strbuf_swap(struct strbuf *a, struct strbuf *b) {
+	struct strbuf tmp = *a;
+	*a = *b;
+	*b = tmp;
+}
+
+/*----- strbuf size related -----*/
+static inline size_t strbuf_avail(const struct strbuf *sb) {
+	return sb->alloc ? sb->alloc - sb->len - 1 : 0;
+}
+
+extern void strbuf_grow(struct strbuf *, size_t);
+
+static inline void strbuf_setlen(struct strbuf *sb, size_t len) {
+	if (!sb->alloc)
+		strbuf_grow(sb, 0);
+	assert(len < sb->alloc);
+	sb->len = len;
+	sb->buf[len] = '\0';
+}
+#define strbuf_reset(sb)  strbuf_setlen(sb, 0)
+
+/*----- content related -----*/
+extern void strbuf_trim(struct strbuf *);
+extern void strbuf_rtrim(struct strbuf *);
+extern void strbuf_ltrim(struct strbuf *);
+extern int strbuf_cmp(const struct strbuf *, const struct strbuf *);
+extern void strbuf_tolower(struct strbuf *);
+
+extern struct strbuf **strbuf_split(const struct strbuf *, int delim);
+extern void strbuf_list_free(struct strbuf **);
+
+/*----- add data in your buffer -----*/
+static inline void strbuf_addch(struct strbuf *sb, int c) {
+	strbuf_grow(sb, 1);
+	sb->buf[sb->len++] = c;
+	sb->buf[sb->len] = '\0';
+}
+
+extern void strbuf_insert(struct strbuf *, size_t pos, const void *, size_t);
+extern void strbuf_remove(struct strbuf *, size_t pos, size_t len);
+
+/* splice pos..pos+len with given data */
+extern void strbuf_splice(struct strbuf *, size_t pos, size_t len,
+                          const void *, size_t);
+
+extern void strbuf_add(struct strbuf *, const void *, size_t);
+static inline void strbuf_addstr(struct strbuf *sb, const char *s) {
+	strbuf_add(sb, s, strlen(s));
+}
+static inline void strbuf_addbuf(struct strbuf *sb, const struct strbuf *sb2) {
+	strbuf_add(sb, sb2->buf, sb2->len);
+}
+extern void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len);
+
+typedef size_t (*expand_fn_t) (struct strbuf *sb, const char *placeholder, void *context);
+extern void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn, void *context);
+struct strbuf_expand_dict_entry {
+	const char *placeholder;
+	const char *value;
+};
+extern size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder, void *context);
+
+__attribute__((format(printf,2,3)))
+extern void strbuf_addf(struct strbuf *sb, const char *fmt, ...);
+
+extern size_t strbuf_fread(struct strbuf *, size_t, FILE *);
+/* XXX: if read fails, any partial read is undone */
+extern ssize_t strbuf_read(struct strbuf *, int fd, size_t hint);
+extern int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint);
+extern int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint);
+
+extern int strbuf_getline(struct strbuf *, FILE *, int);
+
+extern void stripspace(struct strbuf *buf, int skip_comments);
+extern int launch_editor(const char *path, struct strbuf *buffer, const char *const *env);
+
+extern int strbuf_branchname(struct strbuf *sb, const char *name);
+extern int strbuf_check_branch_ref(struct strbuf *sb, const char *name);
+
+#endif /* STRBUF_H */
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
new file mode 100644
index 00000000000..ec33c0c7f4e
--- /dev/null
+++ b/tools/perf/util/string.c
@@ -0,0 +1,34 @@
+#include "string.h"
+
+static int hex(char ch)
+{
+	if ((ch >= '0') && (ch <= '9'))
+		return ch - '0';
+	if ((ch >= 'a') && (ch <= 'f'))
+		return ch - 'a' + 10;
+	if ((ch >= 'A') && (ch <= 'F'))
+		return ch - 'A' + 10;
+	return -1;
+}
+
+/*
+ * While we find nice hex chars, build a long_val.
+ * Return number of chars processed.
+ */
+int hex2u64(const char *ptr, __u64 *long_val)
+{
+	const char *p = ptr;
+	*long_val = 0;
+
+	while (*p) {
+		const int hex_val = hex(*p);
+
+		if (hex_val < 0)
+			break;
+
+		*long_val = (*long_val << 4) | hex_val;
+		p++;
+	}
+
+	return p - ptr;
+}
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
new file mode 100644
index 00000000000..72812c1c9a7
--- /dev/null
+++ b/tools/perf/util/string.h
@@ -0,0 +1,8 @@
+#ifndef _PERF_STRING_H_
+#define _PERF_STRING_H_
+
+#include <linux/types.h>
+
+int hex2u64(const char *ptr, __u64 *val);
+
+#endif
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
new file mode 100644
index 00000000000..49a55f81371
--- /dev/null
+++ b/tools/perf/util/symbol.c
@@ -0,0 +1,641 @@
+#include "util.h"
+#include "../perf.h"
+#include "string.h"
+#include "symbol.h"
+
+#include <libelf.h>
+#include <gelf.h>
+#include <elf.h>
+
+const char *sym_hist_filter;
+
+static struct symbol *symbol__new(__u64 start, __u64 len,
+				  const char *name, unsigned int priv_size,
+				  __u64 obj_start, int verbose)
+{
+	size_t namelen = strlen(name) + 1;
+	struct symbol *self = calloc(1, priv_size + sizeof(*self) + namelen);
+
+	if (!self)
+		return NULL;
+
+	if (verbose >= 2)
+		printf("new symbol: %016Lx [%08lx]: %s, hist: %p, obj_start: %p\n",
+			(__u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start);
+
+	self->obj_start= obj_start;
+	self->hist = NULL;
+	self->hist_sum = 0;
+
+	if (sym_hist_filter && !strcmp(name, sym_hist_filter))
+		self->hist = calloc(sizeof(__u64), len);
+
+	if (priv_size) {
+		memset(self, 0, priv_size);
+		self = ((void *)self) + priv_size;
+	}
+	self->start = start;
+	self->end   = start + len - 1;
+	memcpy(self->name, name, namelen);
+
+	return self;
+}
+
+static void symbol__delete(struct symbol *self, unsigned int priv_size)
+{
+	free(((void *)self) - priv_size);
+}
+
+static size_t symbol__fprintf(struct symbol *self, FILE *fp)
+{
+	return fprintf(fp, " %llx-%llx %s\n",
+		       self->start, self->end, self->name);
+}
+
+struct dso *dso__new(const char *name, unsigned int sym_priv_size)
+{
+	struct dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+	if (self != NULL) {
+		strcpy(self->name, name);
+		self->syms = RB_ROOT;
+		self->sym_priv_size = sym_priv_size;
+		self->find_symbol = dso__find_symbol;
+	}
+
+	return self;
+}
+
+static void dso__delete_symbols(struct dso *self)
+{
+	struct symbol *pos;
+	struct rb_node *next = rb_first(&self->syms);
+
+	while (next) {
+		pos = rb_entry(next, struct symbol, rb_node);
+		next = rb_next(&pos->rb_node);
+		rb_erase(&pos->rb_node, &self->syms);
+		symbol__delete(pos, self->sym_priv_size);
+	}
+}
+
+void dso__delete(struct dso *self)
+{
+	dso__delete_symbols(self);
+	free(self);
+}
+
+static void dso__insert_symbol(struct dso *self, struct symbol *sym)
+{
+	struct rb_node **p = &self->syms.rb_node;
+	struct rb_node *parent = NULL;
+	const __u64 ip = sym->start;
+	struct symbol *s;
+
+	while (*p != NULL) {
+		parent = *p;
+		s = rb_entry(parent, struct symbol, rb_node);
+		if (ip < s->start)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&sym->rb_node, parent, p);
+	rb_insert_color(&sym->rb_node, &self->syms);
+}
+
+struct symbol *dso__find_symbol(struct dso *self, __u64 ip)
+{
+	struct rb_node *n;
+
+	if (self == NULL)
+		return NULL;
+
+	n = self->syms.rb_node;
+
+	while (n) {
+		struct symbol *s = rb_entry(n, struct symbol, rb_node);
+
+		if (ip < s->start)
+			n = n->rb_left;
+		else if (ip > s->end)
+			n = n->rb_right;
+		else
+			return s;
+	}
+
+	return NULL;
+}
+
+size_t dso__fprintf(struct dso *self, FILE *fp)
+{
+	size_t ret = fprintf(fp, "dso: %s\n", self->name);
+
+	struct rb_node *nd;
+	for (nd = rb_first(&self->syms); nd; nd = rb_next(nd)) {
+		struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
+		ret += symbol__fprintf(pos, fp);
+	}
+
+	return ret;
+}
+
+static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verbose)
+{
+	struct rb_node *nd, *prevnd;
+	char *line = NULL;
+	size_t n;
+	FILE *file = fopen("/proc/kallsyms", "r");
+
+	if (file == NULL)
+		goto out_failure;
+
+	while (!feof(file)) {
+		__u64 start;
+		struct symbol *sym;
+		int line_len, len;
+		char symbol_type;
+
+		line_len = getline(&line, &n, file);
+		if (line_len < 0)
+			break;
+
+		if (!line)
+			goto out_failure;
+
+		line[--line_len] = '\0'; /* \n */
+
+		len = hex2u64(line, &start);
+
+		len++;
+		if (len + 2 >= line_len)
+			continue;
+
+		symbol_type = toupper(line[len]);
+		/*
+		 * We're interested only in code ('T'ext)
+		 */
+		if (symbol_type != 'T' && symbol_type != 'W')
+			continue;
+		/*
+		 * Well fix up the end later, when we have all sorted.
+		 */
+		sym = symbol__new(start, 0xdead, line + len + 2,
+				  self->sym_priv_size, 0, verbose);
+
+		if (sym == NULL)
+			goto out_delete_line;
+
+		if (filter && filter(self, sym))
+			symbol__delete(sym, self->sym_priv_size);
+		else
+			dso__insert_symbol(self, sym);
+	}
+
+	/*
+	 * Now that we have all sorted out, just set the ->end of all
+	 * symbols
+	 */
+	prevnd = rb_first(&self->syms);
+
+	if (prevnd == NULL)
+		goto out_delete_line;
+
+	for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
+		struct symbol *prev = rb_entry(prevnd, struct symbol, rb_node),
+			      *curr = rb_entry(nd, struct symbol, rb_node);
+
+		prev->end = curr->start - 1;
+		prevnd = nd;
+	}
+
+	free(line);
+	fclose(file);
+
+	return 0;
+
+out_delete_line:
+	free(line);
+out_failure:
+	return -1;
+}
+
+static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int verbose)
+{
+	char *line = NULL;
+	size_t n;
+	FILE *file;
+	int nr_syms = 0;
+
+	file = fopen(self->name, "r");
+	if (file == NULL)
+		goto out_failure;
+
+	while (!feof(file)) {
+		__u64 start, size;
+		struct symbol *sym;
+		int line_len, len;
+
+		line_len = getline(&line, &n, file);
+		if (line_len < 0)
+			break;
+
+		if (!line)
+			goto out_failure;
+
+		line[--line_len] = '\0'; /* \n */
+
+		len = hex2u64(line, &start);
+
+		len++;
+		if (len + 2 >= line_len)
+			continue;
+
+		len += hex2u64(line + len, &size);
+
+		len++;
+		if (len + 2 >= line_len)
+			continue;
+
+		sym = symbol__new(start, size, line + len,
+				  self->sym_priv_size, start, verbose);
+
+		if (sym == NULL)
+			goto out_delete_line;
+
+		if (filter && filter(self, sym))
+			symbol__delete(sym, self->sym_priv_size);
+		else {
+			dso__insert_symbol(self, sym);
+			nr_syms++;
+		}
+	}
+
+	free(line);
+	fclose(file);
+
+	return nr_syms;
+
+out_delete_line:
+	free(line);
+out_failure:
+	return -1;
+}
+
+/**
+ * elf_symtab__for_each_symbol - iterate thru all the symbols
+ *
+ * @self: struct elf_symtab instance to iterate
+ * @index: uint32_t index
+ * @sym: GElf_Sym iterator
+ */
+#define elf_symtab__for_each_symbol(syms, nr_syms, index, sym) \
+	for (index = 0, gelf_getsym(syms, index, &sym);\
+	     index < nr_syms; \
+	     index++, gelf_getsym(syms, index, &sym))
+
+static inline uint8_t elf_sym__type(const GElf_Sym *sym)
+{
+	return GELF_ST_TYPE(sym->st_info);
+}
+
+static inline int elf_sym__is_function(const GElf_Sym *sym)
+{
+	return elf_sym__type(sym) == STT_FUNC &&
+	       sym->st_name != 0 &&
+	       sym->st_shndx != SHN_UNDEF &&
+	       sym->st_size != 0;
+}
+
+static inline const char *elf_sym__name(const GElf_Sym *sym,
+					const Elf_Data *symstrs)
+{
+	return symstrs->d_buf + sym->st_name;
+}
+
+static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
+				    GElf_Shdr *shp, const char *name,
+				    size_t *index)
+{
+	Elf_Scn *sec = NULL;
+	size_t cnt = 1;
+
+	while ((sec = elf_nextscn(elf, sec)) != NULL) {
+		char *str;
+
+		gelf_getshdr(sec, shp);
+		str = elf_strptr(elf, ep->e_shstrndx, shp->sh_name);
+		if (!strcmp(name, str)) {
+			if (index)
+				*index = cnt;
+			break;
+		}
+		++cnt;
+	}
+
+	return sec;
+}
+
+#define elf_section__for_each_rel(reldata, pos, pos_mem, idx, nr_entries) \
+	for (idx = 0, pos = gelf_getrel(reldata, 0, &pos_mem); \
+	     idx < nr_entries; \
+	     ++idx, pos = gelf_getrel(reldata, idx, &pos_mem))
+
+#define elf_section__for_each_rela(reldata, pos, pos_mem, idx, nr_entries) \
+	for (idx = 0, pos = gelf_getrela(reldata, 0, &pos_mem); \
+	     idx < nr_entries; \
+	     ++idx, pos = gelf_getrela(reldata, idx, &pos_mem))
+
+static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
+				       GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym,
+				       GElf_Shdr *shdr_dynsym,
+				       size_t dynsym_idx, int verbose)
+{
+	uint32_t nr_rel_entries, idx;
+	GElf_Sym sym;
+	__u64 plt_offset;
+	GElf_Shdr shdr_plt;
+	struct symbol *f;
+	GElf_Shdr shdr_rel_plt;
+	Elf_Data *reldata, *syms, *symstrs;
+	Elf_Scn *scn_plt_rel, *scn_symstrs;
+	char sympltname[1024];
+	int nr = 0, symidx;
+
+	scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+					  ".rela.plt", NULL);
+	if (scn_plt_rel == NULL) {
+		scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+						  ".rel.plt", NULL);
+		if (scn_plt_rel == NULL)
+			return 0;
+	}
+
+	if (shdr_rel_plt.sh_link != dynsym_idx)
+		return 0;
+
+	if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL)
+		return 0;
+
+	/*
+	 * Fetch the relocation section to find the indexes to the GOT
+	 * and the symbols in the .dynsym they refer to.
+	 */
+	reldata = elf_getdata(scn_plt_rel, NULL);
+	if (reldata == NULL)
+		return -1;
+
+	syms = elf_getdata(scn_dynsym, NULL);
+	if (syms == NULL)
+		return -1;
+
+	scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link);
+	if (scn_symstrs == NULL)
+		return -1;
+
+	symstrs = elf_getdata(scn_symstrs, NULL);
+	if (symstrs == NULL)
+		return -1;
+
+	nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize;
+	plt_offset = shdr_plt.sh_offset;
+
+	if (shdr_rel_plt.sh_type == SHT_RELA) {
+		GElf_Rela pos_mem, *pos;
+
+		elf_section__for_each_rela(reldata, pos, pos_mem, idx,
+					   nr_rel_entries) {
+			symidx = GELF_R_SYM(pos->r_info);
+			plt_offset += shdr_plt.sh_entsize;
+			gelf_getsym(syms, symidx, &sym);
+			snprintf(sympltname, sizeof(sympltname),
+				 "%s@plt", elf_sym__name(&sym, symstrs));
+
+			f = symbol__new(plt_offset, shdr_plt.sh_entsize,
+					sympltname, self->sym_priv_size, 0, verbose);
+			if (!f)
+				return -1;
+
+			dso__insert_symbol(self, f);
+			++nr;
+		}
+	} else if (shdr_rel_plt.sh_type == SHT_REL) {
+		GElf_Rel pos_mem, *pos;
+		elf_section__for_each_rel(reldata, pos, pos_mem, idx,
+					  nr_rel_entries) {
+			symidx = GELF_R_SYM(pos->r_info);
+			plt_offset += shdr_plt.sh_entsize;
+			gelf_getsym(syms, symidx, &sym);
+			snprintf(sympltname, sizeof(sympltname),
+				 "%s@plt", elf_sym__name(&sym, symstrs));
+
+			f = symbol__new(plt_offset, shdr_plt.sh_entsize,
+					sympltname, self->sym_priv_size, 0, verbose);
+			if (!f)
+				return -1;
+
+			dso__insert_symbol(self, f);
+			++nr;
+		}
+	} else {
+		/*
+		 * TODO: There are still one more shdr_rel_plt.sh_type
+		 * I have to investigate, but probably should be ignored.
+		 */
+	}
+
+	return nr;
+}
+
+static int dso__load_sym(struct dso *self, int fd, const char *name,
+			 symbol_filter_t filter, int verbose)
+{
+	Elf_Data *symstrs;
+	uint32_t nr_syms;
+	int err = -1;
+	uint32_t index;
+	GElf_Ehdr ehdr;
+	GElf_Shdr shdr;
+	Elf_Data *syms;
+	GElf_Sym sym;
+	Elf_Scn *sec, *sec_dynsym;
+	Elf *elf;
+	size_t dynsym_idx;
+	int nr = 0;
+
+	elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+	if (elf == NULL) {
+		if (verbose)
+			fprintf(stderr, "%s: cannot read %s ELF file.\n",
+				__func__, name);
+		goto out_close;
+	}
+
+	if (gelf_getehdr(elf, &ehdr) == NULL) {
+		if (verbose)
+			fprintf(stderr, "%s: cannot get elf header.\n", __func__);
+		goto out_elf_end;
+	}
+
+	/*
+	 * We need to check if we have a .dynsym, so that we can handle the
+	 * .plt, synthesizing its symbols, that aren't on the symtabs (be it
+	 * .dynsym or .symtab)
+	 */
+	sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr,
+					 ".dynsym", &dynsym_idx);
+	if (sec_dynsym != NULL) {
+		nr = dso__synthesize_plt_symbols(self, elf, &ehdr,
+						 sec_dynsym, &shdr,
+						 dynsym_idx, verbose);
+		if (nr < 0)
+			goto out_elf_end;
+	}
+
+	/*
+	 * But if we have a full .symtab (that is a superset of .dynsym) we
+	 * should add the symbols not in the .dynsyn
+	 */
+	sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
+	if (sec == NULL) {
+		if (sec_dynsym == NULL)
+			goto out_elf_end;
+
+		sec = sec_dynsym;
+		gelf_getshdr(sec, &shdr);
+	}
+
+	syms = elf_getdata(sec, NULL);
+	if (syms == NULL)
+		goto out_elf_end;
+
+	sec = elf_getscn(elf, shdr.sh_link);
+	if (sec == NULL)
+		goto out_elf_end;
+
+	symstrs = elf_getdata(sec, NULL);
+	if (symstrs == NULL)
+		goto out_elf_end;
+
+	nr_syms = shdr.sh_size / shdr.sh_entsize;
+
+	memset(&sym, 0, sizeof(sym));
+
+	elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
+		struct symbol *f;
+		__u64 obj_start;
+
+		if (!elf_sym__is_function(&sym))
+			continue;
+
+		sec = elf_getscn(elf, sym.st_shndx);
+		if (!sec)
+			goto out_elf_end;
+
+		gelf_getshdr(sec, &shdr);
+		obj_start = sym.st_value;
+
+		sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+
+		f = symbol__new(sym.st_value, sym.st_size,
+				elf_sym__name(&sym, symstrs),
+				self->sym_priv_size, obj_start, verbose);
+		if (!f)
+			goto out_elf_end;
+
+		if (filter && filter(self, f))
+			symbol__delete(f, self->sym_priv_size);
+		else {
+			dso__insert_symbol(self, f);
+			nr++;
+		}
+	}
+
+	err = nr;
+out_elf_end:
+	elf_end(elf);
+out_close:
+	return err;
+}
+
+int dso__load(struct dso *self, symbol_filter_t filter, int verbose)
+{
+	int size = strlen(self->name) + sizeof("/usr/lib/debug%s.debug");
+	char *name = malloc(size);
+	int variant = 0;
+	int ret = -1;
+	int fd;
+
+	if (!name)
+		return -1;
+
+	if (strncmp(self->name, "/tmp/perf-", 10) == 0)
+		return dso__load_perf_map(self, filter, verbose);
+
+more:
+	do {
+		switch (variant) {
+		case 0: /* Fedora */
+			snprintf(name, size, "/usr/lib/debug%s.debug", self->name);
+			break;
+		case 1: /* Ubuntu */
+			snprintf(name, size, "/usr/lib/debug%s", self->name);
+			break;
+		case 2: /* Sane people */
+			snprintf(name, size, "%s", self->name);
+			break;
+
+		default:
+			goto out;
+		}
+		variant++;
+
+		fd = open(name, O_RDONLY);
+	} while (fd < 0);
+
+	ret = dso__load_sym(self, fd, name, filter, verbose);
+	close(fd);
+
+	/*
+	 * Some people seem to have debuginfo files _WITHOUT_ debug info!?!?
+	 */
+	if (!ret)
+		goto more;
+
+out:
+	free(name);
+	return ret;
+}
+
+static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
+			     symbol_filter_t filter, int verbose)
+{
+	int err, fd = open(vmlinux, O_RDONLY);
+
+	if (fd < 0)
+		return -1;
+
+	err = dso__load_sym(self, fd, vmlinux, filter, verbose);
+	close(fd);
+
+	return err;
+}
+
+int dso__load_kernel(struct dso *self, const char *vmlinux,
+		     symbol_filter_t filter, int verbose)
+{
+	int err = -1;
+
+	if (vmlinux)
+		err = dso__load_vmlinux(self, vmlinux, filter, verbose);
+
+	if (err)
+		err = dso__load_kallsyms(self, filter, verbose);
+
+	return err;
+}
+
+void symbol__init(void)
+{
+	elf_version(EV_CURRENT);
+}
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
new file mode 100644
index 00000000000..0d1292bd827
--- /dev/null
+++ b/tools/perf/util/symbol.h
@@ -0,0 +1,47 @@
+#ifndef _PERF_SYMBOL_
+#define _PERF_SYMBOL_ 1
+
+#include <linux/types.h>
+#include "list.h"
+#include "rbtree.h"
+
+struct symbol {
+	struct rb_node	rb_node;
+	__u64		start;
+	__u64		end;
+	__u64		obj_start;
+	__u64		hist_sum;
+	__u64		*hist;
+	char		name[0];
+};
+
+struct dso {
+	struct list_head node;
+	struct rb_root	 syms;
+	unsigned int	 sym_priv_size;
+	struct symbol    *(*find_symbol)(struct dso *, __u64 ip);
+	char		 name[0];
+};
+
+const char *sym_hist_filter;
+
+typedef int (*symbol_filter_t)(struct dso *self, struct symbol *sym);
+
+struct dso *dso__new(const char *name, unsigned int sym_priv_size);
+void dso__delete(struct dso *self);
+
+static inline void *dso__sym_priv(struct dso *self, struct symbol *sym)
+{
+	return ((void *)sym) - self->sym_priv_size;
+}
+
+struct symbol *dso__find_symbol(struct dso *self, __u64 ip);
+
+int dso__load_kernel(struct dso *self, const char *vmlinux,
+		     symbol_filter_t filter, int verbose);
+int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
+
+size_t dso__fprintf(struct dso *self, FILE *fp);
+
+void symbol__init(void);
+#endif /* _PERF_SYMBOL_ */
diff --git a/tools/perf/util/usage.c b/tools/perf/util/usage.c
new file mode 100644
index 00000000000..e16bf9a707e
--- /dev/null
+++ b/tools/perf/util/usage.c
@@ -0,0 +1,80 @@
+/*
+ * GIT - The information manager from hell
+ *
+ * Copyright (C) Linus Torvalds, 2005
+ */
+#include "util.h"
+
+static void report(const char *prefix, const char *err, va_list params)
+{
+	char msg[1024];
+	vsnprintf(msg, sizeof(msg), err, params);
+	fprintf(stderr, " %s%s\n", prefix, msg);
+}
+
+static NORETURN void usage_builtin(const char *err)
+{
+	fprintf(stderr, "\n Usage: %s\n", err);
+	exit(129);
+}
+
+static NORETURN void die_builtin(const char *err, va_list params)
+{
+	report(" Fatal: ", err, params);
+	exit(128);
+}
+
+static void error_builtin(const char *err, va_list params)
+{
+	report(" Error: ", err, params);
+}
+
+static void warn_builtin(const char *warn, va_list params)
+{
+	report(" Warning: ", warn, params);
+}
+
+/* If we are in a dlopen()ed .so write to a global variable would segfault
+ * (ugh), so keep things static. */
+static void (*usage_routine)(const char *err) NORETURN = usage_builtin;
+static void (*die_routine)(const char *err, va_list params) NORETURN = die_builtin;
+static void (*error_routine)(const char *err, va_list params) = error_builtin;
+static void (*warn_routine)(const char *err, va_list params) = warn_builtin;
+
+void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN)
+{
+	die_routine = routine;
+}
+
+void usage(const char *err)
+{
+	usage_routine(err);
+}
+
+void die(const char *err, ...)
+{
+	va_list params;
+
+	va_start(params, err);
+	die_routine(err, params);
+	va_end(params);
+}
+
+int error(const char *err, ...)
+{
+	va_list params;
+
+	va_start(params, err);
+	error_routine(err, params);
+	va_end(params);
+	return -1;
+}
+
+void warning(const char *warn, ...)
+{
+	va_list params;
+
+	va_start(params, warn);
+	warn_routine(warn, params);
+	va_end(params);
+}
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
new file mode 100644
index 00000000000..76590a16c27
--- /dev/null
+++ b/tools/perf/util/util.h
@@ -0,0 +1,410 @@
+#ifndef GIT_COMPAT_UTIL_H
+#define GIT_COMPAT_UTIL_H
+
+#define _FILE_OFFSET_BITS 64
+
+#ifndef FLEX_ARRAY
+/*
+ * See if our compiler is known to support flexible array members.
+ */
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+# define FLEX_ARRAY /* empty */
+#elif defined(__GNUC__)
+# if (__GNUC__ >= 3)
+#  define FLEX_ARRAY /* empty */
+# else
+#  define FLEX_ARRAY 0 /* older GNU extension */
+# endif
+#endif
+
+/*
+ * Otherwise, default to safer but a bit wasteful traditional style
+ */
+#ifndef FLEX_ARRAY
+# define FLEX_ARRAY 1
+#endif
+#endif
+
+#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
+
+#ifdef __GNUC__
+#define TYPEOF(x) (__typeof__(x))
+#else
+#define TYPEOF(x)
+#endif
+
+#define MSB(x, bits) ((x) & TYPEOF(x)(~0ULL << (sizeof(x) * 8 - (bits))))
+#define HAS_MULTI_BITS(i)  ((i) & ((i) - 1))  /* checks if an integer has more than 1 bit set */
+
+/* Approximation of the length of the decimal representation of this type. */
+#define decimal_length(x)	((int)(sizeof(x) * 2.56 + 0.5) + 1)
+
+#if !defined(__APPLE__) && !defined(__FreeBSD__)  && !defined(__USLC__) && !defined(_M_UNIX)
+#define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */
+#define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */
+#endif
+#define _ALL_SOURCE 1
+#define _GNU_SOURCE 1
+#define _BSD_SOURCE 1
+
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+#include <limits.h>
+#include <sys/param.h>
+#include <sys/types.h>
+#include <dirent.h>
+#include <sys/time.h>
+#include <time.h>
+#include <signal.h>
+#include <fnmatch.h>
+#include <assert.h>
+#include <regex.h>
+#include <utime.h>
+#ifndef __MINGW32__
+#include <sys/wait.h>
+#include <sys/poll.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#ifndef NO_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+#include <netinet/in.h>
+#include <netinet/tcp.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <pwd.h>
+#include <inttypes.h>
+#if defined(__CYGWIN__)
+#undef _XOPEN_SOURCE
+#include <grp.h>
+#define _XOPEN_SOURCE 600
+#include "compat/cygwin.h"
+#else
+#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */
+#include <grp.h>
+#define _ALL_SOURCE 1
+#endif
+#else 	/* __MINGW32__ */
+/* pull in Windows compatibility stuff */
+#include "compat/mingw.h"
+#endif	/* __MINGW32__ */
+
+#ifndef NO_ICONV
+#include <iconv.h>
+#endif
+
+#ifndef NO_OPENSSL
+#include <openssl/ssl.h>
+#include <openssl/err.h>
+#endif
+
+/* On most systems <limits.h> would have given us this, but
+ * not on some systems (e.g. GNU/Hurd).
+ */
+#ifndef PATH_MAX
+#define PATH_MAX 4096
+#endif
+
+#ifndef PRIuMAX
+#define PRIuMAX "llu"
+#endif
+
+#ifndef PRIu32
+#define PRIu32 "u"
+#endif
+
+#ifndef PRIx32
+#define PRIx32 "x"
+#endif
+
+#ifndef PATH_SEP
+#define PATH_SEP ':'
+#endif
+
+#ifndef STRIP_EXTENSION
+#define STRIP_EXTENSION ""
+#endif
+
+#ifndef has_dos_drive_prefix
+#define has_dos_drive_prefix(path) 0
+#endif
+
+#ifndef is_dir_sep
+#define is_dir_sep(c) ((c) == '/')
+#endif
+
+#ifdef __GNUC__
+#define NORETURN __attribute__((__noreturn__))
+#else
+#define NORETURN
+#ifndef __attribute__
+#define __attribute__(x)
+#endif
+#endif
+
+/* General helper functions */
+extern void usage(const char *err) NORETURN;
+extern void die(const char *err, ...) NORETURN __attribute__((format (printf, 1, 2)));
+extern int error(const char *err, ...) __attribute__((format (printf, 1, 2)));
+extern void warning(const char *err, ...) __attribute__((format (printf, 1, 2)));
+
+extern void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN);
+
+extern int prefixcmp(const char *str, const char *prefix);
+extern time_t tm_to_time_t(const struct tm *tm);
+
+static inline const char *skip_prefix(const char *str, const char *prefix)
+{
+	size_t len = strlen(prefix);
+	return strncmp(str, prefix, len) ? NULL : str + len;
+}
+
+#if defined(NO_MMAP) || defined(USE_WIN32_MMAP)
+
+#ifndef PROT_READ
+#define PROT_READ 1
+#define PROT_WRITE 2
+#define MAP_PRIVATE 1
+#define MAP_FAILED ((void*)-1)
+#endif
+
+#define mmap git_mmap
+#define munmap git_munmap
+extern void *git_mmap(void *start, size_t length, int prot, int flags, int fd, off_t offset);
+extern int git_munmap(void *start, size_t length);
+
+#else /* NO_MMAP || USE_WIN32_MMAP */
+
+#include <sys/mman.h>
+
+#endif /* NO_MMAP || USE_WIN32_MMAP */
+
+#ifdef NO_MMAP
+
+/* This value must be multiple of (pagesize * 2) */
+#define DEFAULT_PACKED_GIT_WINDOW_SIZE (1 * 1024 * 1024)
+
+#else /* NO_MMAP */
+
+/* This value must be multiple of (pagesize * 2) */
+#define DEFAULT_PACKED_GIT_WINDOW_SIZE \
+	(sizeof(void*) >= 8 \
+		?  1 * 1024 * 1024 * 1024 \
+		: 32 * 1024 * 1024)
+
+#endif /* NO_MMAP */
+
+#ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
+#define on_disk_bytes(st) ((st).st_size)
+#else
+#define on_disk_bytes(st) ((st).st_blocks * 512)
+#endif
+
+#define DEFAULT_PACKED_GIT_LIMIT \
+	((1024L * 1024L) * (sizeof(void*) >= 8 ? 8192 : 256))
+
+#ifdef NO_PREAD
+#define pread git_pread
+extern ssize_t git_pread(int fd, void *buf, size_t count, off_t offset);
+#endif
+/*
+ * Forward decl that will remind us if its twin in cache.h changes.
+ * This function is used in compat/pread.c.  But we can't include
+ * cache.h there.
+ */
+extern ssize_t read_in_full(int fd, void *buf, size_t count);
+
+#ifdef NO_SETENV
+#define setenv gitsetenv
+extern int gitsetenv(const char *, const char *, int);
+#endif
+
+#ifdef NO_MKDTEMP
+#define mkdtemp gitmkdtemp
+extern char *gitmkdtemp(char *);
+#endif
+
+#ifdef NO_UNSETENV
+#define unsetenv gitunsetenv
+extern void gitunsetenv(const char *);
+#endif
+
+#ifdef NO_STRCASESTR
+#define strcasestr gitstrcasestr
+extern char *gitstrcasestr(const char *haystack, const char *needle);
+#endif
+
+#ifdef NO_STRLCPY
+#define strlcpy gitstrlcpy
+extern size_t gitstrlcpy(char *, const char *, size_t);
+#endif
+
+#ifdef NO_STRTOUMAX
+#define strtoumax gitstrtoumax
+extern uintmax_t gitstrtoumax(const char *, char **, int);
+#endif
+
+#ifdef NO_HSTRERROR
+#define hstrerror githstrerror
+extern const char *githstrerror(int herror);
+#endif
+
+#ifdef NO_MEMMEM
+#define memmem gitmemmem
+void *gitmemmem(const void *haystack, size_t haystacklen,
+                const void *needle, size_t needlelen);
+#endif
+
+#ifdef FREAD_READS_DIRECTORIES
+#ifdef fopen
+#undef fopen
+#endif
+#define fopen(a,b) git_fopen(a,b)
+extern FILE *git_fopen(const char*, const char*);
+#endif
+
+#ifdef SNPRINTF_RETURNS_BOGUS
+#define snprintf git_snprintf
+extern int git_snprintf(char *str, size_t maxsize,
+			const char *format, ...);
+#define vsnprintf git_vsnprintf
+extern int git_vsnprintf(char *str, size_t maxsize,
+			 const char *format, va_list ap);
+#endif
+
+#ifdef __GLIBC_PREREQ
+#if __GLIBC_PREREQ(2, 1)
+#define HAVE_STRCHRNUL
+#endif
+#endif
+
+#ifndef HAVE_STRCHRNUL
+#define strchrnul gitstrchrnul
+static inline char *gitstrchrnul(const char *s, int c)
+{
+	while (*s && *s != c)
+		s++;
+	return (char *)s;
+}
+#endif
+
+/*
+ * Wrappers:
+ */
+extern char *xstrdup(const char *str);
+extern void *xmalloc(size_t size);
+extern void *xmemdupz(const void *data, size_t len);
+extern char *xstrndup(const char *str, size_t len);
+extern void *xrealloc(void *ptr, size_t size);
+extern void *xcalloc(size_t nmemb, size_t size);
+extern void *xmmap(void *start, size_t length, int prot, int flags, int fd, off_t offset);
+extern ssize_t xread(int fd, void *buf, size_t len);
+extern ssize_t xwrite(int fd, const void *buf, size_t len);
+extern int xdup(int fd);
+extern FILE *xfdopen(int fd, const char *mode);
+extern int xmkstemp(char *template);
+
+static inline size_t xsize_t(off_t len)
+{
+	return (size_t)len;
+}
+
+static inline int has_extension(const char *filename, const char *ext)
+{
+	size_t len = strlen(filename);
+	size_t extlen = strlen(ext);
+	return len > extlen && !memcmp(filename + len - extlen, ext, extlen);
+}
+
+/* Sane ctype - no locale, and works with signed chars */
+#undef isascii
+#undef isspace
+#undef isdigit
+#undef isalpha
+#undef isalnum
+#undef tolower
+#undef toupper
+extern unsigned char sane_ctype[256];
+#define GIT_SPACE 0x01
+#define GIT_DIGIT 0x02
+#define GIT_ALPHA 0x04
+#define GIT_GLOB_SPECIAL 0x08
+#define GIT_REGEX_SPECIAL 0x10
+#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
+#define isascii(x) (((x) & ~0x7f) == 0)
+#define isspace(x) sane_istest(x,GIT_SPACE)
+#define isdigit(x) sane_istest(x,GIT_DIGIT)
+#define isalpha(x) sane_istest(x,GIT_ALPHA)
+#define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT)
+#define is_glob_special(x) sane_istest(x,GIT_GLOB_SPECIAL)
+#define is_regex_special(x) sane_istest(x,GIT_GLOB_SPECIAL | GIT_REGEX_SPECIAL)
+#define tolower(x) sane_case((unsigned char)(x), 0x20)
+#define toupper(x) sane_case((unsigned char)(x), 0)
+
+static inline int sane_case(int x, int high)
+{
+	if (sane_istest(x, GIT_ALPHA))
+		x = (x & ~0x20) | high;
+	return x;
+}
+
+static inline int strtoul_ui(char const *s, int base, unsigned int *result)
+{
+	unsigned long ul;
+	char *p;
+
+	errno = 0;
+	ul = strtoul(s, &p, base);
+	if (errno || *p || p == s || (unsigned int) ul != ul)
+		return -1;
+	*result = ul;
+	return 0;
+}
+
+static inline int strtol_i(char const *s, int base, int *result)
+{
+	long ul;
+	char *p;
+
+	errno = 0;
+	ul = strtol(s, &p, base);
+	if (errno || *p || p == s || (int) ul != ul)
+		return -1;
+	*result = ul;
+	return 0;
+}
+
+#ifdef INTERNAL_QSORT
+void git_qsort(void *base, size_t nmemb, size_t size,
+	       int(*compar)(const void *, const void *));
+#define qsort git_qsort
+#endif
+
+#ifndef DIR_HAS_BSD_GROUP_SEMANTICS
+# define FORCE_DIR_SET_GID S_ISGID
+#else
+# define FORCE_DIR_SET_GID 0
+#endif
+
+#ifdef NO_NSEC
+#undef USE_NSEC
+#define ST_CTIME_NSEC(st) 0
+#define ST_MTIME_NSEC(st) 0
+#else
+#ifdef USE_ST_TIMESPEC
+#define ST_CTIME_NSEC(st) ((unsigned int)((st).st_ctimespec.tv_nsec))
+#define ST_MTIME_NSEC(st) ((unsigned int)((st).st_mtimespec.tv_nsec))
+#else
+#define ST_CTIME_NSEC(st) ((unsigned int)((st).st_ctim.tv_nsec))
+#define ST_MTIME_NSEC(st) ((unsigned int)((st).st_mtim.tv_nsec))
+#endif
+#endif
+
+#endif
diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c
new file mode 100644
index 00000000000..6350d65f6d9
--- /dev/null
+++ b/tools/perf/util/wrapper.c
@@ -0,0 +1,206 @@
+/*
+ * Various trivial helper wrappers around standard functions
+ */
+#include "cache.h"
+
+/*
+ * There's no pack memory to release - but stay close to the Git
+ * version so wrap this away:
+ */
+static inline void release_pack_memory(size_t size, int flag)
+{
+}
+
+char *xstrdup(const char *str)
+{
+	char *ret = strdup(str);
+	if (!ret) {
+		release_pack_memory(strlen(str) + 1, -1);
+		ret = strdup(str);
+		if (!ret)
+			die("Out of memory, strdup failed");
+	}
+	return ret;
+}
+
+void *xmalloc(size_t size)
+{
+	void *ret = malloc(size);
+	if (!ret && !size)
+		ret = malloc(1);
+	if (!ret) {
+		release_pack_memory(size, -1);
+		ret = malloc(size);
+		if (!ret && !size)
+			ret = malloc(1);
+		if (!ret)
+			die("Out of memory, malloc failed");
+	}
+#ifdef XMALLOC_POISON
+	memset(ret, 0xA5, size);
+#endif
+	return ret;
+}
+
+/*
+ * xmemdupz() allocates (len + 1) bytes of memory, duplicates "len" bytes of
+ * "data" to the allocated memory, zero terminates the allocated memory,
+ * and returns a pointer to the allocated memory. If the allocation fails,
+ * the program dies.
+ */
+void *xmemdupz(const void *data, size_t len)
+{
+	char *p = xmalloc(len + 1);
+	memcpy(p, data, len);
+	p[len] = '\0';
+	return p;
+}
+
+char *xstrndup(const char *str, size_t len)
+{
+	char *p = memchr(str, '\0', len);
+	return xmemdupz(str, p ? p - str : len);
+}
+
+void *xrealloc(void *ptr, size_t size)
+{
+	void *ret = realloc(ptr, size);
+	if (!ret && !size)
+		ret = realloc(ptr, 1);
+	if (!ret) {
+		release_pack_memory(size, -1);
+		ret = realloc(ptr, size);
+		if (!ret && !size)
+			ret = realloc(ptr, 1);
+		if (!ret)
+			die("Out of memory, realloc failed");
+	}
+	return ret;
+}
+
+void *xcalloc(size_t nmemb, size_t size)
+{
+	void *ret = calloc(nmemb, size);
+	if (!ret && (!nmemb || !size))
+		ret = calloc(1, 1);
+	if (!ret) {
+		release_pack_memory(nmemb * size, -1);
+		ret = calloc(nmemb, size);
+		if (!ret && (!nmemb || !size))
+			ret = calloc(1, 1);
+		if (!ret)
+			die("Out of memory, calloc failed");
+	}
+	return ret;
+}
+
+void *xmmap(void *start, size_t length,
+	int prot, int flags, int fd, off_t offset)
+{
+	void *ret = mmap(start, length, prot, flags, fd, offset);
+	if (ret == MAP_FAILED) {
+		if (!length)
+			return NULL;
+		release_pack_memory(length, fd);
+		ret = mmap(start, length, prot, flags, fd, offset);
+		if (ret == MAP_FAILED)
+			die("Out of memory? mmap failed: %s", strerror(errno));
+	}
+	return ret;
+}
+
+/*
+ * xread() is the same a read(), but it automatically restarts read()
+ * operations with a recoverable error (EAGAIN and EINTR). xread()
+ * DOES NOT GUARANTEE that "len" bytes is read even if the data is available.
+ */
+ssize_t xread(int fd, void *buf, size_t len)
+{
+	ssize_t nr;
+	while (1) {
+		nr = read(fd, buf, len);
+		if ((nr < 0) && (errno == EAGAIN || errno == EINTR))
+			continue;
+		return nr;
+	}
+}
+
+/*
+ * xwrite() is the same a write(), but it automatically restarts write()
+ * operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT
+ * GUARANTEE that "len" bytes is written even if the operation is successful.
+ */
+ssize_t xwrite(int fd, const void *buf, size_t len)
+{
+	ssize_t nr;
+	while (1) {
+		nr = write(fd, buf, len);
+		if ((nr < 0) && (errno == EAGAIN || errno == EINTR))
+			continue;
+		return nr;
+	}
+}
+
+ssize_t read_in_full(int fd, void *buf, size_t count)
+{
+	char *p = buf;
+	ssize_t total = 0;
+
+	while (count > 0) {
+		ssize_t loaded = xread(fd, p, count);
+		if (loaded <= 0)
+			return total ? total : loaded;
+		count -= loaded;
+		p += loaded;
+		total += loaded;
+	}
+
+	return total;
+}
+
+ssize_t write_in_full(int fd, const void *buf, size_t count)
+{
+	const char *p = buf;
+	ssize_t total = 0;
+
+	while (count > 0) {
+		ssize_t written = xwrite(fd, p, count);
+		if (written < 0)
+			return -1;
+		if (!written) {
+			errno = ENOSPC;
+			return -1;
+		}
+		count -= written;
+		p += written;
+		total += written;
+	}
+
+	return total;
+}
+
+int xdup(int fd)
+{
+	int ret = dup(fd);
+	if (ret < 0)
+		die("dup failed: %s", strerror(errno));
+	return ret;
+}
+
+FILE *xfdopen(int fd, const char *mode)
+{
+	FILE *stream = fdopen(fd, mode);
+	if (stream == NULL)
+		die("Out of memory? fdopen failed: %s", strerror(errno));
+	return stream;
+}
+
+int xmkstemp(char *template)
+{
+	int fd;
+
+	fd = mkstemp(template);
+	if (fd < 0)
+		die("Unable to create temporary file: %s", strerror(errno));
+	return fd;
+}
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index c3b99def9cb..1eddae94bab 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -85,7 +85,7 @@ static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
 
 static int ioapic_service(struct kvm_ioapic *ioapic, unsigned int idx)
 {
-	union ioapic_redir_entry *pent;
+	union kvm_ioapic_redirect_entry *pent;
 	int injected = -1;
 
 	pent = &ioapic->redirtbl[idx];
@@ -142,149 +142,40 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 	}
 }
 
-static int ioapic_inj_irq(struct kvm_ioapic *ioapic,
-			   struct kvm_vcpu *vcpu,
-			   u8 vector, u8 trig_mode, u8 delivery_mode)
-{
-	ioapic_debug("irq %d trig %d deliv %d\n", vector, trig_mode,
-		     delivery_mode);
-
-	ASSERT((delivery_mode == IOAPIC_FIXED) ||
-	       (delivery_mode == IOAPIC_LOWEST_PRIORITY));
-
-	return kvm_apic_set_irq(vcpu, vector, trig_mode);
-}
-
-static void ioapic_inj_nmi(struct kvm_vcpu *vcpu)
-{
-	kvm_inject_nmi(vcpu);
-	kvm_vcpu_kick(vcpu);
-}
-
-u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
-				    u8 dest_mode)
-{
-	u32 mask = 0;
-	int i;
-	struct kvm *kvm = ioapic->kvm;
-	struct kvm_vcpu *vcpu;
-
-	ioapic_debug("dest %d dest_mode %d\n", dest, dest_mode);
-
-	if (dest_mode == 0) {	/* Physical mode. */
-		if (dest == 0xFF) {	/* Broadcast. */
-			for (i = 0; i < KVM_MAX_VCPUS; ++i)
-				if (kvm->vcpus[i] && kvm->vcpus[i]->arch.apic)
-					mask |= 1 << i;
-			return mask;
-		}
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = kvm->vcpus[i];
-			if (!vcpu)
-				continue;
-			if (kvm_apic_match_physical_addr(vcpu->arch.apic, dest)) {
-				if (vcpu->arch.apic)
-					mask = 1 << i;
-				break;
-			}
-		}
-	} else if (dest != 0)	/* Logical mode, MDA non-zero. */
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = kvm->vcpus[i];
-			if (!vcpu)
-				continue;
-			if (vcpu->arch.apic &&
-			    kvm_apic_match_logical_addr(vcpu->arch.apic, dest))
-				mask |= 1 << vcpu->vcpu_id;
-		}
-	ioapic_debug("mask %x\n", mask);
-	return mask;
-}
-
 static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
 {
-	u8 dest = ioapic->redirtbl[irq].fields.dest_id;
-	u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode;
-	u8 delivery_mode = ioapic->redirtbl[irq].fields.delivery_mode;
-	u8 vector = ioapic->redirtbl[irq].fields.vector;
-	u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode;
-	u32 deliver_bitmask;
-	struct kvm_vcpu *vcpu;
-	int vcpu_id, r = -1;
+	union kvm_ioapic_redirect_entry *entry = &ioapic->redirtbl[irq];
+	struct kvm_lapic_irq irqe;
 
 	ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x "
 		     "vector=%x trig_mode=%x\n",
-		     dest, dest_mode, delivery_mode, vector, trig_mode);
-
-	deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic, dest,
-							  dest_mode);
-	if (!deliver_bitmask) {
-		ioapic_debug("no target on destination\n");
-		return 0;
-	}
+		     entry->fields.dest, entry->fields.dest_mode,
+		     entry->fields.delivery_mode, entry->fields.vector,
+		     entry->fields.trig_mode);
+
+	irqe.dest_id = entry->fields.dest_id;
+	irqe.vector = entry->fields.vector;
+	irqe.dest_mode = entry->fields.dest_mode;
+	irqe.trig_mode = entry->fields.trig_mode;
+	irqe.delivery_mode = entry->fields.delivery_mode << 8;
+	irqe.level = 1;
+	irqe.shorthand = 0;
 
-	switch (delivery_mode) {
-	case IOAPIC_LOWEST_PRIORITY:
-		vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector,
-				deliver_bitmask);
 #ifdef CONFIG_X86
-		if (irq == 0)
-			vcpu = ioapic->kvm->vcpus[0];
-#endif
-		if (vcpu != NULL)
-			r = ioapic_inj_irq(ioapic, vcpu, vector,
-				       trig_mode, delivery_mode);
-		else
-			ioapic_debug("null lowest prio vcpu: "
-				     "mask=%x vector=%x delivery_mode=%x\n",
-				     deliver_bitmask, vector, IOAPIC_LOWEST_PRIORITY);
-		break;
-	case IOAPIC_FIXED:
-#ifdef CONFIG_X86
-		if (irq == 0)
-			deliver_bitmask = 1;
-#endif
-		for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) {
-			if (!(deliver_bitmask & (1 << vcpu_id)))
-				continue;
-			deliver_bitmask &= ~(1 << vcpu_id);
-			vcpu = ioapic->kvm->vcpus[vcpu_id];
-			if (vcpu) {
-				if (r < 0)
-					r = 0;
-				r += ioapic_inj_irq(ioapic, vcpu, vector,
-					       trig_mode, delivery_mode);
-			}
-		}
-		break;
-	case IOAPIC_NMI:
-		for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) {
-			if (!(deliver_bitmask & (1 << vcpu_id)))
-				continue;
-			deliver_bitmask &= ~(1 << vcpu_id);
-			vcpu = ioapic->kvm->vcpus[vcpu_id];
-			if (vcpu) {
-				ioapic_inj_nmi(vcpu);
-				r = 1;
-			}
-			else
-				ioapic_debug("NMI to vcpu %d failed\n",
-						vcpu->vcpu_id);
-		}
-		break;
-	default:
-		printk(KERN_WARNING "Unsupported delivery mode %d\n",
-		       delivery_mode);
-		break;
+	/* Always delivery PIT interrupt to vcpu 0 */
+	if (irq == 0) {
+		irqe.dest_mode = 0; /* Physical mode. */
+		irqe.dest_id = ioapic->kvm->vcpus[0]->vcpu_id;
 	}
-	return r;
+#endif
+	return kvm_irq_delivery_to_apic(ioapic->kvm, NULL, &irqe);
 }
 
 int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
 {
 	u32 old_irr = ioapic->irr;
 	u32 mask = 1 << irq;
-	union ioapic_redir_entry entry;
+	union kvm_ioapic_redirect_entry entry;
 	int ret = 1;
 
 	if (irq >= 0 && irq < IOAPIC_NUM_PINS) {
@@ -305,7 +196,7 @@ int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
 static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int pin,
 				    int trigger_mode)
 {
-	union ioapic_redir_entry *ent;
+	union kvm_ioapic_redirect_entry *ent;
 
 	ent = &ioapic->redirtbl[pin];
 
diff --git a/virt/kvm/ioapic.h b/virt/kvm/ioapic.h
index a34bd5e6436..7080b713c16 100644
--- a/virt/kvm/ioapic.h
+++ b/virt/kvm/ioapic.h
@@ -40,22 +40,7 @@ struct kvm_ioapic {
 	u32 id;
 	u32 irr;
 	u32 pad;
-	union ioapic_redir_entry {
-		u64 bits;
-		struct {
-			u8 vector;
-			u8 delivery_mode:3;
-			u8 dest_mode:1;
-			u8 delivery_status:1;
-			u8 polarity:1;
-			u8 remote_irr:1;
-			u8 trig_mode:1;
-			u8 mask:1;
-			u8 reserve:7;
-			u8 reserved[4];
-			u8 dest_id;
-		} fields;
-	} redirtbl[IOAPIC_NUM_PINS];
+	union kvm_ioapic_redirect_entry redirtbl[IOAPIC_NUM_PINS];
 	struct kvm_io_device dev;
 	struct kvm *kvm;
 	void (*ack_notifier)(void *opaque, int irq);
@@ -79,13 +64,13 @@ static inline struct kvm_ioapic *ioapic_irqchip(struct kvm *kvm)
 	return kvm->arch.vioapic;
 }
 
-struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector,
-				       unsigned long bitmap);
+int kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
+		int short_hand, int dest, int dest_mode);
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2);
 void kvm_ioapic_update_eoi(struct kvm *kvm, int vector, int trigger_mode);
 int kvm_ioapic_init(struct kvm *kvm);
 int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level);
 void kvm_ioapic_reset(struct kvm_ioapic *ioapic);
-u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
-				u8 dest_mode);
-
+int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
+		struct kvm_lapic_irq *irq);
 #endif
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index 4c403750360..15147583abd 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -39,11 +39,16 @@ int kvm_iommu_map_pages(struct kvm *kvm,
 	pfn_t pfn;
 	int i, r = 0;
 	struct iommu_domain *domain = kvm->arch.iommu_domain;
+	int flags;
 
 	/* check if iommu exists and in use */
 	if (!domain)
 		return 0;
 
+	flags = IOMMU_READ | IOMMU_WRITE;
+	if (kvm->arch.iommu_flags & KVM_IOMMU_CACHE_COHERENCY)
+		flags |= IOMMU_CACHE;
+
 	for (i = 0; i < npages; i++) {
 		/* check if already mapped */
 		if (iommu_iova_to_phys(domain, gfn_to_gpa(gfn)))
@@ -53,8 +58,7 @@ int kvm_iommu_map_pages(struct kvm *kvm,
 		r = iommu_map_range(domain,
 				    gfn_to_gpa(gfn),
 				    pfn_to_hpa(pfn),
-				    PAGE_SIZE,
-				    IOMMU_READ | IOMMU_WRITE);
+				    PAGE_SIZE, flags);
 		if (r) {
 			printk(KERN_ERR "kvm_iommu_map_address:"
 			       "iommu failed to map pfn=%lx\n", pfn);
@@ -88,7 +92,7 @@ int kvm_assign_device(struct kvm *kvm,
 {
 	struct pci_dev *pdev = NULL;
 	struct iommu_domain *domain = kvm->arch.iommu_domain;
-	int r;
+	int r, last_flags;
 
 	/* check if iommu exists and in use */
 	if (!domain)
@@ -107,12 +111,29 @@ int kvm_assign_device(struct kvm *kvm,
 		return r;
 	}
 
+	last_flags = kvm->arch.iommu_flags;
+	if (iommu_domain_has_cap(kvm->arch.iommu_domain,
+				 IOMMU_CAP_CACHE_COHERENCY))
+		kvm->arch.iommu_flags |= KVM_IOMMU_CACHE_COHERENCY;
+
+	/* Check if need to update IOMMU page table for guest memory */
+	if ((last_flags ^ kvm->arch.iommu_flags) ==
+			KVM_IOMMU_CACHE_COHERENCY) {
+		kvm_iommu_unmap_memslots(kvm);
+		r = kvm_iommu_map_memslots(kvm);
+		if (r)
+			goto out_unmap;
+	}
+
 	printk(KERN_DEBUG "assign device: host bdf = %x:%x:%x\n",
 		assigned_dev->host_busnr,
 		PCI_SLOT(assigned_dev->host_devfn),
 		PCI_FUNC(assigned_dev->host_devfn));
 
 	return 0;
+out_unmap:
+	kvm_iommu_unmap_memslots(kvm);
+	return r;
 }
 
 int kvm_deassign_device(struct kvm *kvm,
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index 864ac5483ba..a8bd466d00c 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -22,6 +22,9 @@
 #include <linux/kvm_host.h>
 
 #include <asm/msidef.h>
+#ifdef CONFIG_IA64
+#include <asm/iosapic.h>
+#endif
 
 #include "irq.h"
 
@@ -43,57 +46,73 @@ static int kvm_set_ioapic_irq(struct kvm_kernel_irq_routing_entry *e,
 	return kvm_ioapic_set_irq(kvm->arch.vioapic, e->irqchip.pin, level);
 }
 
-static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
-		       struct kvm *kvm, int level)
+inline static bool kvm_is_dm_lowest_prio(struct kvm_lapic_irq *irq)
 {
-	int vcpu_id, r = -1;
-	struct kvm_vcpu *vcpu;
-	struct kvm_ioapic *ioapic = ioapic_irqchip(kvm);
-	int dest_id = (e->msi.address_lo & MSI_ADDR_DEST_ID_MASK)
-			>> MSI_ADDR_DEST_ID_SHIFT;
-	int vector = (e->msi.data & MSI_DATA_VECTOR_MASK)
-			>> MSI_DATA_VECTOR_SHIFT;
-	int dest_mode = test_bit(MSI_ADDR_DEST_MODE_SHIFT,
-				(unsigned long *)&e->msi.address_lo);
-	int trig_mode = test_bit(MSI_DATA_TRIGGER_SHIFT,
-				(unsigned long *)&e->msi.data);
-	int delivery_mode = test_bit(MSI_DATA_DELIVERY_MODE_SHIFT,
-				(unsigned long *)&e->msi.data);
-	u32 deliver_bitmask;
-
-	BUG_ON(!ioapic);
-
-	deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic,
-				dest_id, dest_mode);
-	/* IOAPIC delivery mode value is the same as MSI here */
-	switch (delivery_mode) {
-	case IOAPIC_LOWEST_PRIORITY:
-		vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector,
-				deliver_bitmask);
-		if (vcpu != NULL)
-			r = kvm_apic_set_irq(vcpu, vector, trig_mode);
-		else
-			printk(KERN_INFO "kvm: null lowest priority vcpu!\n");
-		break;
-	case IOAPIC_FIXED:
-		for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) {
-			if (!(deliver_bitmask & (1 << vcpu_id)))
-				continue;
-			deliver_bitmask &= ~(1 << vcpu_id);
-			vcpu = ioapic->kvm->vcpus[vcpu_id];
-			if (vcpu) {
-				if (r < 0)
-					r = 0;
-				r += kvm_apic_set_irq(vcpu, vector, trig_mode);
-			}
+#ifdef CONFIG_IA64
+	return irq->delivery_mode ==
+		(IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT);
+#else
+	return irq->delivery_mode == APIC_DM_LOWEST;
+#endif
+}
+
+int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
+		struct kvm_lapic_irq *irq)
+{
+	int i, r = -1;
+	struct kvm_vcpu *vcpu, *lowest = NULL;
+
+	if (irq->dest_mode == 0 && irq->dest_id == 0xff &&
+			kvm_is_dm_lowest_prio(irq))
+		printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n");
+
+	for (i = 0; i < KVM_MAX_VCPUS; i++) {
+		vcpu = kvm->vcpus[i];
+
+		if (!vcpu || !kvm_apic_present(vcpu))
+			continue;
+
+		if (!kvm_apic_match_dest(vcpu, src, irq->shorthand,
+					irq->dest_id, irq->dest_mode))
+			continue;
+
+		if (!kvm_is_dm_lowest_prio(irq)) {
+			if (r < 0)
+				r = 0;
+			r += kvm_apic_set_irq(vcpu, irq);
+		} else {
+			if (!lowest)
+				lowest = vcpu;
+			else if (kvm_apic_compare_prio(vcpu, lowest) < 0)
+				lowest = vcpu;
 		}
-		break;
-	default:
-		break;
 	}
+
+	if (lowest)
+		r = kvm_apic_set_irq(lowest, irq);
+
 	return r;
 }
 
+static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
+		       struct kvm *kvm, int level)
+{
+	struct kvm_lapic_irq irq;
+
+	irq.dest_id = (e->msi.address_lo &
+			MSI_ADDR_DEST_ID_MASK) >> MSI_ADDR_DEST_ID_SHIFT;
+	irq.vector = (e->msi.data &
+			MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT;
+	irq.dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo;
+	irq.trig_mode = (1 << MSI_DATA_TRIGGER_SHIFT) & e->msi.data;
+	irq.delivery_mode = e->msi.data & 0x700;
+	irq.level = 1;
+	irq.shorthand = 0;
+
+	/* TODO Deal with RH bit of MSI message address */
+	return kvm_irq_delivery_to_apic(kvm, NULL, &irq);
+}
+
 /* This should be called with the kvm->lock mutex held
  * Return value:
  *  < 0   Interrupt was ignored (masked or not delivered for other reasons)
@@ -252,7 +271,7 @@ static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e,
 			delta = 8;
 			break;
 		case KVM_IRQCHIP_IOAPIC:
-				e->set = kvm_set_ioapic_irq;
+			e->set = kvm_set_ioapic_irq;
 			break;
 		default:
 			goto out;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 1ecbe2391c8..764554350ed 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -41,6 +41,8 @@
 #include <linux/pagemap.h>
 #include <linux/mman.h>
 #include <linux/swap.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -60,9 +62,6 @@
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
-static int msi2intx = 1;
-module_param(msi2intx, bool, 0);
-
 DEFINE_SPINLOCK(kvm_lock);
 LIST_HEAD(vm_list);
 
@@ -95,38 +94,96 @@ static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *h
 	return NULL;
 }
 
+static int find_index_from_host_irq(struct kvm_assigned_dev_kernel
+				    *assigned_dev, int irq)
+{
+	int i, index;
+	struct msix_entry *host_msix_entries;
+
+	host_msix_entries = assigned_dev->host_msix_entries;
+
+	index = -1;
+	for (i = 0; i < assigned_dev->entries_nr; i++)
+		if (irq == host_msix_entries[i].vector) {
+			index = i;
+			break;
+		}
+	if (index < 0) {
+		printk(KERN_WARNING "Fail to find correlated MSI-X entry!\n");
+		return 0;
+	}
+
+	return index;
+}
+
 static void kvm_assigned_dev_interrupt_work_handler(struct work_struct *work)
 {
 	struct kvm_assigned_dev_kernel *assigned_dev;
+	struct kvm *kvm;
+	int irq, i;
 
 	assigned_dev = container_of(work, struct kvm_assigned_dev_kernel,
 				    interrupt_work);
+	kvm = assigned_dev->kvm;
 
 	/* This is taken to safely inject irq inside the guest. When
 	 * the interrupt injection (or the ioapic code) uses a
 	 * finer-grained lock, update this
 	 */
-	mutex_lock(&assigned_dev->kvm->lock);
-	kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
-		    assigned_dev->guest_irq, 1);
-
-	if (assigned_dev->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_MSI) {
-		enable_irq(assigned_dev->host_irq);
-		assigned_dev->host_irq_disabled = false;
+	mutex_lock(&kvm->lock);
+	spin_lock_irq(&assigned_dev->assigned_dev_lock);
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
+		struct kvm_guest_msix_entry *guest_entries =
+			assigned_dev->guest_msix_entries;
+		for (i = 0; i < assigned_dev->entries_nr; i++) {
+			if (!(guest_entries[i].flags &
+					KVM_ASSIGNED_MSIX_PENDING))
+				continue;
+			guest_entries[i].flags &= ~KVM_ASSIGNED_MSIX_PENDING;
+			kvm_set_irq(assigned_dev->kvm,
+				    assigned_dev->irq_source_id,
+				    guest_entries[i].vector, 1);
+			irq = assigned_dev->host_msix_entries[i].vector;
+			if (irq != 0)
+				enable_irq(irq);
+			assigned_dev->host_irq_disabled = false;
+		}
+	} else {
+		kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
+			    assigned_dev->guest_irq, 1);
+		if (assigned_dev->irq_requested_type &
+				KVM_DEV_IRQ_GUEST_MSI) {
+			enable_irq(assigned_dev->host_irq);
+			assigned_dev->host_irq_disabled = false;
+		}
 	}
+
+	spin_unlock_irq(&assigned_dev->assigned_dev_lock);
 	mutex_unlock(&assigned_dev->kvm->lock);
 }
 
 static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
 {
+	unsigned long flags;
 	struct kvm_assigned_dev_kernel *assigned_dev =
 		(struct kvm_assigned_dev_kernel *) dev_id;
 
+	spin_lock_irqsave(&assigned_dev->assigned_dev_lock, flags);
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
+		int index = find_index_from_host_irq(assigned_dev, irq);
+		if (index < 0)
+			goto out;
+		assigned_dev->guest_msix_entries[index].flags |=
+			KVM_ASSIGNED_MSIX_PENDING;
+	}
+
 	schedule_work(&assigned_dev->interrupt_work);
 
 	disable_irq_nosync(irq);
 	assigned_dev->host_irq_disabled = true;
 
+out:
+	spin_unlock_irqrestore(&assigned_dev->assigned_dev_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -134,6 +191,7 @@ static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
 static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian)
 {
 	struct kvm_assigned_dev_kernel *dev;
+	unsigned long flags;
 
 	if (kian->gsi == -1)
 		return;
@@ -146,28 +204,30 @@ static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian)
 	/* The guest irq may be shared so this ack may be
 	 * from another device.
 	 */
+	spin_lock_irqsave(&dev->assigned_dev_lock, flags);
 	if (dev->host_irq_disabled) {
 		enable_irq(dev->host_irq);
 		dev->host_irq_disabled = false;
 	}
+	spin_unlock_irqrestore(&dev->assigned_dev_lock, flags);
 }
 
-/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
-static void kvm_free_assigned_irq(struct kvm *kvm,
-				  struct kvm_assigned_dev_kernel *assigned_dev)
+static void deassign_guest_irq(struct kvm *kvm,
+			       struct kvm_assigned_dev_kernel *assigned_dev)
 {
-	if (!irqchip_in_kernel(kvm))
-		return;
-
 	kvm_unregister_irq_ack_notifier(&assigned_dev->ack_notifier);
+	assigned_dev->ack_notifier.gsi = -1;
 
 	if (assigned_dev->irq_source_id != -1)
 		kvm_free_irq_source_id(kvm, assigned_dev->irq_source_id);
 	assigned_dev->irq_source_id = -1;
+	assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_GUEST_MASK);
+}
 
-	if (!assigned_dev->irq_requested_type)
-		return;
-
+/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
+static void deassign_host_irq(struct kvm *kvm,
+			      struct kvm_assigned_dev_kernel *assigned_dev)
+{
 	/*
 	 * In kvm_free_device_irq, cancel_work_sync return true if:
 	 * 1. work is scheduled, and then cancelled.
@@ -184,17 +244,64 @@ static void kvm_free_assigned_irq(struct kvm *kvm,
 	 * now, the kvm state is still legal for probably we also have to wait
 	 * interrupt_work done.
 	 */
-	disable_irq_nosync(assigned_dev->host_irq);
-	cancel_work_sync(&assigned_dev->interrupt_work);
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
+		int i;
+		for (i = 0; i < assigned_dev->entries_nr; i++)
+			disable_irq_nosync(assigned_dev->
+					   host_msix_entries[i].vector);
+
+		cancel_work_sync(&assigned_dev->interrupt_work);
+
+		for (i = 0; i < assigned_dev->entries_nr; i++)
+			free_irq(assigned_dev->host_msix_entries[i].vector,
+				 (void *)assigned_dev);
+
+		assigned_dev->entries_nr = 0;
+		kfree(assigned_dev->host_msix_entries);
+		kfree(assigned_dev->guest_msix_entries);
+		pci_disable_msix(assigned_dev->dev);
+	} else {
+		/* Deal with MSI and INTx */
+		disable_irq_nosync(assigned_dev->host_irq);
+		cancel_work_sync(&assigned_dev->interrupt_work);
 
-	free_irq(assigned_dev->host_irq, (void *)assigned_dev);
+		free_irq(assigned_dev->host_irq, (void *)assigned_dev);
 
-	if (assigned_dev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)
-		pci_disable_msi(assigned_dev->dev);
+		if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSI)
+			pci_disable_msi(assigned_dev->dev);
+	}
 
-	assigned_dev->irq_requested_type = 0;
+	assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_HOST_MASK);
 }
 
+static int kvm_deassign_irq(struct kvm *kvm,
+			    struct kvm_assigned_dev_kernel *assigned_dev,
+			    unsigned long irq_requested_type)
+{
+	unsigned long guest_irq_type, host_irq_type;
+
+	if (!irqchip_in_kernel(kvm))
+		return -EINVAL;
+	/* no irq assignment to deassign */
+	if (!assigned_dev->irq_requested_type)
+		return -ENXIO;
+
+	host_irq_type = irq_requested_type & KVM_DEV_IRQ_HOST_MASK;
+	guest_irq_type = irq_requested_type & KVM_DEV_IRQ_GUEST_MASK;
+
+	if (host_irq_type)
+		deassign_host_irq(kvm, assigned_dev);
+	if (guest_irq_type)
+		deassign_guest_irq(kvm, assigned_dev);
+
+	return 0;
+}
+
+static void kvm_free_assigned_irq(struct kvm *kvm,
+				  struct kvm_assigned_dev_kernel *assigned_dev)
+{
+	kvm_deassign_irq(kvm, assigned_dev, assigned_dev->irq_requested_type);
+}
 
 static void kvm_free_assigned_device(struct kvm *kvm,
 				     struct kvm_assigned_dev_kernel
@@ -226,190 +333,244 @@ void kvm_free_all_assigned_devices(struct kvm *kvm)
 	}
 }
 
-static int assigned_device_update_intx(struct kvm *kvm,
-			struct kvm_assigned_dev_kernel *adev,
-			struct kvm_assigned_irq *airq)
+static int assigned_device_enable_host_intx(struct kvm *kvm,
+					    struct kvm_assigned_dev_kernel *dev)
 {
-	adev->guest_irq = airq->guest_irq;
-	adev->ack_notifier.gsi = airq->guest_irq;
+	dev->host_irq = dev->dev->irq;
+	/* Even though this is PCI, we don't want to use shared
+	 * interrupts. Sharing host devices with guest-assigned devices
+	 * on the same interrupt line is not a happy situation: there
+	 * are going to be long delays in accepting, acking, etc.
+	 */
+	if (request_irq(dev->host_irq, kvm_assigned_dev_intr,
+			0, "kvm_assigned_intx_device", (void *)dev))
+		return -EIO;
+	return 0;
+}
 
-	if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_INTX)
-		return 0;
+#ifdef __KVM_HAVE_MSI
+static int assigned_device_enable_host_msi(struct kvm *kvm,
+					   struct kvm_assigned_dev_kernel *dev)
+{
+	int r;
 
-	if (irqchip_in_kernel(kvm)) {
-		if (!msi2intx &&
-		    (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)) {
-			free_irq(adev->host_irq, (void *)adev);
-			pci_disable_msi(adev->dev);
-		}
+	if (!dev->dev->msi_enabled) {
+		r = pci_enable_msi(dev->dev);
+		if (r)
+			return r;
+	}
 
-		if (!capable(CAP_SYS_RAWIO))
-			return -EPERM;
+	dev->host_irq = dev->dev->irq;
+	if (request_irq(dev->host_irq, kvm_assigned_dev_intr, 0,
+			"kvm_assigned_msi_device", (void *)dev)) {
+		pci_disable_msi(dev->dev);
+		return -EIO;
+	}
 
-		if (airq->host_irq)
-			adev->host_irq = airq->host_irq;
-		else
-			adev->host_irq = adev->dev->irq;
+	return 0;
+}
+#endif
 
-		/* Even though this is PCI, we don't want to use shared
-		 * interrupts. Sharing host devices with guest-assigned devices
-		 * on the same interrupt line is not a happy situation: there
-		 * are going to be long delays in accepting, acking, etc.
-		 */
-		if (request_irq(adev->host_irq, kvm_assigned_dev_intr,
-				0, "kvm_assigned_intx_device", (void *)adev))
-			return -EIO;
+#ifdef __KVM_HAVE_MSIX
+static int assigned_device_enable_host_msix(struct kvm *kvm,
+					    struct kvm_assigned_dev_kernel *dev)
+{
+	int i, r = -EINVAL;
+
+	/* host_msix_entries and guest_msix_entries should have been
+	 * initialized */
+	if (dev->entries_nr == 0)
+		return r;
+
+	r = pci_enable_msix(dev->dev, dev->host_msix_entries, dev->entries_nr);
+	if (r)
+		return r;
+
+	for (i = 0; i < dev->entries_nr; i++) {
+		r = request_irq(dev->host_msix_entries[i].vector,
+				kvm_assigned_dev_intr, 0,
+				"kvm_assigned_msix_device",
+				(void *)dev);
+		/* FIXME: free requested_irq's on failure */
+		if (r)
+			return r;
 	}
 
-	adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_INTX |
-				   KVM_ASSIGNED_DEV_HOST_INTX;
 	return 0;
 }
 
-#ifdef CONFIG_X86
-static int assigned_device_update_msi(struct kvm *kvm,
-			struct kvm_assigned_dev_kernel *adev,
-			struct kvm_assigned_irq *airq)
+#endif
+
+static int assigned_device_enable_guest_intx(struct kvm *kvm,
+				struct kvm_assigned_dev_kernel *dev,
+				struct kvm_assigned_irq *irq)
 {
-	int r;
+	dev->guest_irq = irq->guest_irq;
+	dev->ack_notifier.gsi = irq->guest_irq;
+	return 0;
+}
 
-	adev->guest_irq = airq->guest_irq;
-	if (airq->flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI) {
-		/* x86 don't care upper address of guest msi message addr */
-		adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_MSI;
-		adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_INTX;
-		adev->ack_notifier.gsi = -1;
-	} else if (msi2intx) {
-		adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_INTX;
-		adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_MSI;
-		adev->ack_notifier.gsi = airq->guest_irq;
-	} else {
-		/*
-		 * Guest require to disable device MSI, we disable MSI and
-		 * re-enable INTx by default again. Notice it's only for
-		 * non-msi2intx.
-		 */
-		assigned_device_update_intx(kvm, adev, airq);
-		return 0;
+#ifdef __KVM_HAVE_MSI
+static int assigned_device_enable_guest_msi(struct kvm *kvm,
+			struct kvm_assigned_dev_kernel *dev,
+			struct kvm_assigned_irq *irq)
+{
+	dev->guest_irq = irq->guest_irq;
+	dev->ack_notifier.gsi = -1;
+	return 0;
+}
+#endif
+#ifdef __KVM_HAVE_MSIX
+static int assigned_device_enable_guest_msix(struct kvm *kvm,
+			struct kvm_assigned_dev_kernel *dev,
+			struct kvm_assigned_irq *irq)
+{
+	dev->guest_irq = irq->guest_irq;
+	dev->ack_notifier.gsi = -1;
+	return 0;
+}
+#endif
+
+static int assign_host_irq(struct kvm *kvm,
+			   struct kvm_assigned_dev_kernel *dev,
+			   __u32 host_irq_type)
+{
+	int r = -EEXIST;
+
+	if (dev->irq_requested_type & KVM_DEV_IRQ_HOST_MASK)
+		return r;
+
+	switch (host_irq_type) {
+	case KVM_DEV_IRQ_HOST_INTX:
+		r = assigned_device_enable_host_intx(kvm, dev);
+		break;
+#ifdef __KVM_HAVE_MSI
+	case KVM_DEV_IRQ_HOST_MSI:
+		r = assigned_device_enable_host_msi(kvm, dev);
+		break;
+#endif
+#ifdef __KVM_HAVE_MSIX
+	case KVM_DEV_IRQ_HOST_MSIX:
+		r = assigned_device_enable_host_msix(kvm, dev);
+		break;
+#endif
+	default:
+		r = -EINVAL;
 	}
 
-	if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)
-		return 0;
+	if (!r)
+		dev->irq_requested_type |= host_irq_type;
 
-	if (irqchip_in_kernel(kvm)) {
-		if (!msi2intx) {
-			if (adev->irq_requested_type &
-					KVM_ASSIGNED_DEV_HOST_INTX)
-				free_irq(adev->host_irq, (void *)adev);
+	return r;
+}
 
-			r = pci_enable_msi(adev->dev);
-			if (r)
-				return r;
-		}
+static int assign_guest_irq(struct kvm *kvm,
+			    struct kvm_assigned_dev_kernel *dev,
+			    struct kvm_assigned_irq *irq,
+			    unsigned long guest_irq_type)
+{
+	int id;
+	int r = -EEXIST;
+
+	if (dev->irq_requested_type & KVM_DEV_IRQ_GUEST_MASK)
+		return r;
 
-		adev->host_irq = adev->dev->irq;
-		if (request_irq(adev->host_irq, kvm_assigned_dev_intr, 0,
-				"kvm_assigned_msi_device", (void *)adev))
-			return -EIO;
+	id = kvm_request_irq_source_id(kvm);
+	if (id < 0)
+		return id;
+
+	dev->irq_source_id = id;
+
+	switch (guest_irq_type) {
+	case KVM_DEV_IRQ_GUEST_INTX:
+		r = assigned_device_enable_guest_intx(kvm, dev, irq);
+		break;
+#ifdef __KVM_HAVE_MSI
+	case KVM_DEV_IRQ_GUEST_MSI:
+		r = assigned_device_enable_guest_msi(kvm, dev, irq);
+		break;
+#endif
+#ifdef __KVM_HAVE_MSIX
+	case KVM_DEV_IRQ_GUEST_MSIX:
+		r = assigned_device_enable_guest_msix(kvm, dev, irq);
+		break;
+#endif
+	default:
+		r = -EINVAL;
 	}
 
-	if (!msi2intx)
-		adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_MSI;
+	if (!r) {
+		dev->irq_requested_type |= guest_irq_type;
+		kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
+	} else
+		kvm_free_irq_source_id(kvm, dev->irq_source_id);
 
-	adev->irq_requested_type |= KVM_ASSIGNED_DEV_HOST_MSI;
-	return 0;
+	return r;
 }
-#endif
 
+/* TODO Deal with KVM_DEV_IRQ_ASSIGNED_MASK_MSIX */
 static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
-				   struct kvm_assigned_irq
-				   *assigned_irq)
+				   struct kvm_assigned_irq *assigned_irq)
 {
-	int r = 0;
+	int r = -EINVAL;
 	struct kvm_assigned_dev_kernel *match;
-	u32 current_flags = 0, changed_flags;
+	unsigned long host_irq_type, guest_irq_type;
 
-	mutex_lock(&kvm->lock);
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
 
+	if (!irqchip_in_kernel(kvm))
+		return r;
+
+	mutex_lock(&kvm->lock);
+	r = -ENODEV;
 	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
 				      assigned_irq->assigned_dev_id);
-	if (!match) {
-		mutex_unlock(&kvm->lock);
-		return -EINVAL;
-	}
-
-	if (!match->irq_requested_type) {
-		INIT_WORK(&match->interrupt_work,
-				kvm_assigned_dev_interrupt_work_handler);
-		if (irqchip_in_kernel(kvm)) {
-			/* Register ack nofitier */
-			match->ack_notifier.gsi = -1;
-			match->ack_notifier.irq_acked =
-					kvm_assigned_dev_ack_irq;
-			kvm_register_irq_ack_notifier(kvm,
-					&match->ack_notifier);
-
-			/* Request IRQ source ID */
-			r = kvm_request_irq_source_id(kvm);
-			if (r < 0)
-				goto out_release;
-			else
-				match->irq_source_id = r;
-
-#ifdef CONFIG_X86
-			/* Determine host device irq type, we can know the
-			 * result from dev->msi_enabled */
-			if (msi2intx)
-				pci_enable_msi(match->dev);
-#endif
-		}
-	}
+	if (!match)
+		goto out;
 
-	if ((match->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) &&
-		 (match->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_MSI))
-		current_flags |= KVM_DEV_IRQ_ASSIGN_ENABLE_MSI;
+	host_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_HOST_MASK);
+	guest_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_GUEST_MASK);
 
-	changed_flags = assigned_irq->flags ^ current_flags;
+	r = -EINVAL;
+	/* can only assign one type at a time */
+	if (hweight_long(host_irq_type) > 1)
+		goto out;
+	if (hweight_long(guest_irq_type) > 1)
+		goto out;
+	if (host_irq_type == 0 && guest_irq_type == 0)
+		goto out;
 
-	if ((changed_flags & KVM_DEV_IRQ_ASSIGN_MSI_ACTION) ||
-	    (msi2intx && match->dev->msi_enabled)) {
-#ifdef CONFIG_X86
-		r = assigned_device_update_msi(kvm, match, assigned_irq);
-		if (r) {
-			printk(KERN_WARNING "kvm: failed to enable "
-					"MSI device!\n");
-			goto out_release;
-		}
-#else
-		r = -ENOTTY;
-#endif
-	} else if (assigned_irq->host_irq == 0 && match->dev->irq == 0) {
-		/* Host device IRQ 0 means don't support INTx */
-		if (!msi2intx) {
-			printk(KERN_WARNING
-			       "kvm: wait device to enable MSI!\n");
-			r = 0;
-		} else {
-			printk(KERN_WARNING
-			       "kvm: failed to enable MSI device!\n");
-			r = -ENOTTY;
-			goto out_release;
-		}
-	} else {
-		/* Non-sharing INTx mode */
-		r = assigned_device_update_intx(kvm, match, assigned_irq);
-		if (r) {
-			printk(KERN_WARNING "kvm: failed to enable "
-					"INTx device!\n");
-			goto out_release;
-		}
-	}
+	r = 0;
+	if (host_irq_type)
+		r = assign_host_irq(kvm, match, host_irq_type);
+	if (r)
+		goto out;
 
+	if (guest_irq_type)
+		r = assign_guest_irq(kvm, match, assigned_irq, guest_irq_type);
+out:
 	mutex_unlock(&kvm->lock);
 	return r;
-out_release:
+}
+
+static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm,
+					 struct kvm_assigned_irq
+					 *assigned_irq)
+{
+	int r = -ENODEV;
+	struct kvm_assigned_dev_kernel *match;
+
+	mutex_lock(&kvm->lock);
+
+	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      assigned_irq->assigned_dev_id);
+	if (!match)
+		goto out;
+
+	r = kvm_deassign_irq(kvm, match, assigned_irq->flags);
+out:
 	mutex_unlock(&kvm->lock);
-	kvm_free_assigned_device(kvm, match);
 	return r;
 }
 
@@ -427,7 +588,7 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
 				      assigned_dev->assigned_dev_id);
 	if (match) {
 		/* device already assigned */
-		r = -EINVAL;
+		r = -EEXIST;
 		goto out;
 	}
 
@@ -464,8 +625,12 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
 	match->host_devfn = assigned_dev->devfn;
 	match->flags = assigned_dev->flags;
 	match->dev = dev;
+	spin_lock_init(&match->assigned_dev_lock);
 	match->irq_source_id = -1;
 	match->kvm = kvm;
+	match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq;
+	INIT_WORK(&match->interrupt_work,
+		  kvm_assigned_dev_interrupt_work_handler);
 
 	list_add(&match->list, &kvm->arch.assigned_dev_head);
 
@@ -878,6 +1043,8 @@ static void kvm_destroy_vm(struct kvm *kvm)
 #endif
 #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
 	mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm);
+#else
+	kvm_arch_flush_shadow(kvm);
 #endif
 	kvm_arch_destroy_vm(kvm);
 	mmdrop(mm);
@@ -919,9 +1086,8 @@ int __kvm_set_memory_region(struct kvm *kvm,
 {
 	int r;
 	gfn_t base_gfn;
-	unsigned long npages;
-	int largepages;
-	unsigned long i;
+	unsigned long npages, ugfn;
+	unsigned long largepages, i;
 	struct kvm_memory_slot *memslot;
 	struct kvm_memory_slot old, new;
 
@@ -1010,6 +1176,14 @@ int __kvm_set_memory_region(struct kvm *kvm,
 			new.lpage_info[0].write_count = 1;
 		if ((base_gfn+npages) % KVM_PAGES_PER_HPAGE)
 			new.lpage_info[largepages-1].write_count = 1;
+		ugfn = new.userspace_addr >> PAGE_SHIFT;
+		/*
+		 * If the gfn and userspace address are not aligned wrt each
+		 * other, disable large page support for this slot
+		 */
+		if ((base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE - 1))
+			for (i = 0; i < largepages; ++i)
+				new.lpage_info[i].write_count = 1;
 	}
 
 	/* Allocate page dirty bitmap if needed */
@@ -1043,8 +1217,10 @@ int __kvm_set_memory_region(struct kvm *kvm,
 
 	kvm_free_physmem_slot(&old, npages ? &new : NULL);
 	/* Slot deletion case: we have to update the current slot */
+	spin_lock(&kvm->mmu_lock);
 	if (!npages)
 		*memslot = old;
+	spin_unlock(&kvm->mmu_lock);
 #ifdef CONFIG_DMAR
 	/* map the pages in iommu page table */
 	r = kvm_iommu_map_pages(kvm, base_gfn, npages);
@@ -1454,12 +1630,14 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 	for (;;) {
 		prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
 
-		if (kvm_cpu_has_interrupt(vcpu) ||
-		    kvm_cpu_has_pending_timer(vcpu) ||
-		    kvm_arch_vcpu_runnable(vcpu)) {
+		if ((kvm_arch_interrupt_allowed(vcpu) &&
+					kvm_cpu_has_interrupt(vcpu)) ||
+				kvm_arch_vcpu_runnable(vcpu)) {
 			set_bit(KVM_REQ_UNHALT, &vcpu->requests);
 			break;
 		}
+		if (kvm_cpu_has_pending_timer(vcpu))
+			break;
 		if (signal_pending(current))
 			break;
 
@@ -1593,6 +1771,88 @@ static int kvm_vcpu_ioctl_set_sigmask(struct kvm_vcpu *vcpu, sigset_t *sigset)
 	return 0;
 }
 
+#ifdef __KVM_HAVE_MSIX
+static int kvm_vm_ioctl_set_msix_nr(struct kvm *kvm,
+				    struct kvm_assigned_msix_nr *entry_nr)
+{
+	int r = 0;
+	struct kvm_assigned_dev_kernel *adev;
+
+	mutex_lock(&kvm->lock);
+
+	adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      entry_nr->assigned_dev_id);
+	if (!adev) {
+		r = -EINVAL;
+		goto msix_nr_out;
+	}
+
+	if (adev->entries_nr == 0) {
+		adev->entries_nr = entry_nr->entry_nr;
+		if (adev->entries_nr == 0 ||
+		    adev->entries_nr >= KVM_MAX_MSIX_PER_DEV) {
+			r = -EINVAL;
+			goto msix_nr_out;
+		}
+
+		adev->host_msix_entries = kzalloc(sizeof(struct msix_entry) *
+						entry_nr->entry_nr,
+						GFP_KERNEL);
+		if (!adev->host_msix_entries) {
+			r = -ENOMEM;
+			goto msix_nr_out;
+		}
+		adev->guest_msix_entries = kzalloc(
+				sizeof(struct kvm_guest_msix_entry) *
+				entry_nr->entry_nr, GFP_KERNEL);
+		if (!adev->guest_msix_entries) {
+			kfree(adev->host_msix_entries);
+			r = -ENOMEM;
+			goto msix_nr_out;
+		}
+	} else /* Not allowed set MSI-X number twice */
+		r = -EINVAL;
+msix_nr_out:
+	mutex_unlock(&kvm->lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_set_msix_entry(struct kvm *kvm,
+				       struct kvm_assigned_msix_entry *entry)
+{
+	int r = 0, i;
+	struct kvm_assigned_dev_kernel *adev;
+
+	mutex_lock(&kvm->lock);
+
+	adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      entry->assigned_dev_id);
+
+	if (!adev) {
+		r = -EINVAL;
+		goto msix_entry_out;
+	}
+
+	for (i = 0; i < adev->entries_nr; i++)
+		if (adev->guest_msix_entries[i].vector == 0 ||
+		    adev->guest_msix_entries[i].entry == entry->entry) {
+			adev->guest_msix_entries[i].entry = entry->entry;
+			adev->guest_msix_entries[i].vector = entry->gsi;
+			adev->host_msix_entries[i].entry = entry->entry;
+			break;
+		}
+	if (i == adev->entries_nr) {
+		r = -ENOSPC;
+		goto msix_entry_out;
+	}
+
+msix_entry_out:
+	mutex_unlock(&kvm->lock);
+
+	return r;
+}
+#endif
+
 static long kvm_vcpu_ioctl(struct file *filp,
 			   unsigned int ioctl, unsigned long arg)
 {
@@ -1864,6 +2124,11 @@ static long kvm_vm_ioctl(struct file *filp,
 		break;
 	}
 	case KVM_ASSIGN_IRQ: {
+		r = -EOPNOTSUPP;
+		break;
+	}
+#ifdef KVM_CAP_ASSIGN_DEV_IRQ
+	case KVM_ASSIGN_DEV_IRQ: {
 		struct kvm_assigned_irq assigned_irq;
 
 		r = -EFAULT;
@@ -1874,6 +2139,18 @@ static long kvm_vm_ioctl(struct file *filp,
 			goto out;
 		break;
 	}
+	case KVM_DEASSIGN_DEV_IRQ: {
+		struct kvm_assigned_irq assigned_irq;
+
+		r = -EFAULT;
+		if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq))
+			goto out;
+		r = kvm_vm_ioctl_deassign_dev_irq(kvm, &assigned_irq);
+		if (r)
+			goto out;
+		break;
+	}
+#endif
 #endif
 #ifdef KVM_CAP_DEVICE_DEASSIGNMENT
 	case KVM_DEASSIGN_PCI_DEVICE: {
@@ -1917,7 +2194,29 @@ static long kvm_vm_ioctl(struct file *filp,
 		vfree(entries);
 		break;
 	}
+#ifdef __KVM_HAVE_MSIX
+	case KVM_ASSIGN_SET_MSIX_NR: {
+		struct kvm_assigned_msix_nr entry_nr;
+		r = -EFAULT;
+		if (copy_from_user(&entry_nr, argp, sizeof entry_nr))
+			goto out;
+		r = kvm_vm_ioctl_set_msix_nr(kvm, &entry_nr);
+		if (r)
+			goto out;
+		break;
+	}
+	case KVM_ASSIGN_SET_MSIX_ENTRY: {
+		struct kvm_assigned_msix_entry entry;
+		r = -EFAULT;
+		if (copy_from_user(&entry, argp, sizeof entry))
+			goto out;
+		r = kvm_vm_ioctl_set_msix_entry(kvm, &entry);
+		if (r)
+			goto out;
+		break;
+	}
 #endif
+#endif /* KVM_CAP_IRQ_ROUTING */
 	default:
 		r = kvm_arch_vm_ioctl(filp, ioctl, arg);
 	}
@@ -2112,15 +2411,15 @@ EXPORT_SYMBOL_GPL(kvm_handle_fault_on_reboot);
 static int kvm_reboot(struct notifier_block *notifier, unsigned long val,
 		      void *v)
 {
-	if (val == SYS_RESTART) {
-		/*
-		 * Some (well, at least mine) BIOSes hang on reboot if
-		 * in vmx root mode.
-		 */
-		printk(KERN_INFO "kvm: exiting hardware virtualization\n");
-		kvm_rebooting = true;
-		on_each_cpu(hardware_disable, NULL, 1);
-	}
+	/*
+	 * Some (well, at least mine) BIOSes hang on reboot if
+	 * in vmx root mode.
+	 *
+	 * And Intel TXT required VMX off for all cpu when system shutdown.
+	 */
+	printk(KERN_INFO "kvm: exiting hardware virtualization\n");
+	kvm_rebooting = true;
+	on_each_cpu(hardware_disable, NULL, 1);
 	return NOTIFY_OK;
 }
 
@@ -2301,7 +2600,7 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
 
 	bad_pfn = page_to_pfn(bad_page);
 
-	if (!alloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
+	if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
 		r = -ENOMEM;
 		goto out_free_0;
 	}
@@ -2353,9 +2652,6 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
 
 	kvm_preempt_ops.sched_in = kvm_sched_in;
 	kvm_preempt_ops.sched_out = kvm_sched_out;
-#ifndef CONFIG_X86
-	msi2intx = 0;
-#endif
 
 	return 0;